WorldWideScience

Sample records for blocks autophagosome fusion

  1. Autophagy regulation revealed by SapM-induced block of autophagosome-lysosome fusion via binding RAB7

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Dong, E-mail: austhudong@126.com [Institute of Infection and Immunology, Department of Medical Immunology, Medical School, Anhui University of Science and Technology, Huainan (China); Wu, Jing, E-mail: wujing8008@126.com [Institute of Infection and Immunology, Department of Medical Immunology, Medical School, Anhui University of Science and Technology, Huainan (China); Wang, Wan; Mu, Min; Zhao, Runpeng; Xu, Xuewei; Chen, Zhaoquan [Institute of Infection and Immunology, Department of Medical Immunology, Medical School, Anhui University of Science and Technology, Huainan (China); Xiao, Jian [School of Pharmacy, Wenzhou Medical College, Wenzhou (China); Hu, Fengyu; Yang, Yabo [Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou (China); Zhang, Rongbo, E-mail: lory456@126.com [Institute of Infection and Immunology, Department of Medical Immunology, Medical School, Anhui University of Science and Technology, Huainan (China)

    2015-05-29

    The mechanism underlying autophagy alteration by mycobacterium tuberculosis remains unclear. Our previous study shows LpqH, a lipoprotein of mycobacterium tuberculosis, can cause autophagosomes accumulation in murine macrophages. It is well known that SapM, another virulence factor, plays an important role in blocking phagosome-endosome fusion. However, the mechanism that SapM interferes with autophagy remains poorly defined. In this study, we report that SapM suppresses the autophagy flux by blocking autophagosome fusion with lysosome. Exposure to SapM results in accumulations of autophagosomes and decreased co-localization of autophagosome with lysosome. Molecularly, Rab7, a small GTPase, is blocked by SapM through its CT domain and is prevented from involvement of autophagosome-lysosome fusion. In conclusion, our study reveals that SapM takes Rab7 as a previously unknown target to govern a distinct molecular mechanism underlying autophagosome-lysosome fusion, which may bring light to a new thought about developing potential drugs or vaccines against tuberculosis. - Highlights: • A mechanism for disrupting autophagosome-lysosome fusion induced by SapM. • Rab7 is involved in SapM-inhibited autophagy. • SapM interacts with Rab7 by CT-domain. • CT-domain is indispensable to SapM-inhibited autophagy.

  2. Autophagy regulation revealed by SapM-induced block of autophagosome-lysosome fusion via binding RAB7

    International Nuclear Information System (INIS)

    The mechanism underlying autophagy alteration by mycobacterium tuberculosis remains unclear. Our previous study shows LpqH, a lipoprotein of mycobacterium tuberculosis, can cause autophagosomes accumulation in murine macrophages. It is well known that SapM, another virulence factor, plays an important role in blocking phagosome-endosome fusion. However, the mechanism that SapM interferes with autophagy remains poorly defined. In this study, we report that SapM suppresses the autophagy flux by blocking autophagosome fusion with lysosome. Exposure to SapM results in accumulations of autophagosomes and decreased co-localization of autophagosome with lysosome. Molecularly, Rab7, a small GTPase, is blocked by SapM through its CT domain and is prevented from involvement of autophagosome-lysosome fusion. In conclusion, our study reveals that SapM takes Rab7 as a previously unknown target to govern a distinct molecular mechanism underlying autophagosome-lysosome fusion, which may bring light to a new thought about developing potential drugs or vaccines against tuberculosis. - Highlights: • A mechanism for disrupting autophagosome-lysosome fusion induced by SapM. • Rab7 is involved in SapM-inhibited autophagy. • SapM interacts with Rab7 by CT-domain. • CT-domain is indispensable to SapM-inhibited autophagy

  3. [SapM-induced fusion blocking of autophagosome-lysosome is depended on interaction with Rab7].

    Science.gov (United States)

    Hu, Dong; Wang, Wan; Zhao, Runpeng; Xu, Xuewei; Xing, Yingru; Ni, Shengfa; Xu, Congjing; Tie, Baoxian; Zhang, Rongbo; Wu, Jing

    2016-09-01

    Objective To study the role of Rab7 in the blockage of autophagosome-lysosome fusion induced by secretory acid phosphatase (SapM), a virulence factor of mycobacterium tuberculosis. Methods The Raw264.7 cells were transfected with siRab7, and the P62 was detected using Western blotting. After transfected with mCherry-SapM, the co-localization of SapM and Rab7 in Raw264.7 cells was detected by immunofluorescence cytochemistry and the interaction of SapM with Rab7 was determined by co-immunoprecipitation. SapM mutants including SapM(δ ARCA), SapM(δ FRED) and SapM(δ CT) were used to transfect Raw264.7 cells, and their associations with Rab7 were analyzed. Results The treatment of siRab7 induced a significant increase of P62 in these cells. Immunofluorescence cytochemistry showed the intracellular co-localization of SapM and Rab7. Co-immunoprecipitation showed that SapM and Rab7 were precipitated by each other. Only SapM(δ CT) failed to interact with Rab7 among the three SapM mutants. Conclusion The inhibition of autophagosome-lysosome fusion induced by SapM is dependent on the interaction between SapM and Rab7. PMID:27609571

  4. Activation of lysosomal function in the course of autophagy via mTORC1 suppression and autophagosome-lysosome fusion

    Institute of Scientific and Technical Information of China (English)

    Jing Zhou; Shi-Hao Tan; Valérie Nicolas; Chantal Bauvy; Nai-Di Yang; Jianbin Zhang; Yuan Xue

    2013-01-01

    Lysosome is a key subcellular organelle in the execution of the autophagic process and at present little is known whether lysosomal function is controlled in the process of autophagy.In this study,we first found that suppression of mammalian target of rapamycin (mTOR) activity by starvation or two mTOR catalytic inhibitors (PP242 and Torinl),but not by an allosteric inhibitor (rapamycin),leads to activation of lysosomal function.Second,we provided evidence that activation of lysosomal function is associated with the suppression of mTOR complex 1 (mTORC1),but not mTORC2,and the mTORC1 localization to lysosomes is not directly correlated to its regulatory role in lysosomal function.Third,we examined the involvement of transcription factor EB (TFEB) and demonstrated that TFEB activation following mTORC1 suppression is necessary but not sufficient for lysosomal activation.Finally,Atg5 or Atg7deletion or blockage of the autophagosome-lysosome fusion process effectively diminished lysosomal activation,suggesting that lysosomal activation occurring in the course of autophagy is dependent on antophagosome-lysosome fusion.Taken together,this study demonstrates that in the course of autophagy,lysosomal function is upregulated via a dual mechanism involving mTORC1 suppression and autophagosome-lysosome fusion.

  5. Virulent Brucella abortus Prevents Lysosome Fusion and Is Distributed within Autophagosome-Like Compartments

    OpenAIRE

    Pizarro-Cerdá, Javier; Moreno, Edgardo; Sanguedolce, Veronique; Mege, Jean-Louis; Gorvel, Jean-Pierre

    1998-01-01

    Virulent and attenuated Brucella abortus strains attach to and penetrate nonprofessional phagocytic HeLa cells. Compared to pathogenic Brucella, the attenuated strain 19 hardly replicates within cells. The majority of the strain 19 bacteria colocalized with the lysosome marker cathepsin D, suggesting that Brucella-containing phagosomes had fused with lysosomes, in which they may have degraded. The virulent bacteria prevented lysosome-phagosome fusion and were found distributed in the perinucl...

  6. Matrix protein 2 of influenza A virus blocks autophagosome fusion with lysosomes

    DEFF Research Database (Denmark)

    Gannagé, Monique; Dormann, Dorothee; Albrecht, Randy;

    2009-01-01

    Influenza A virus is an important human pathogen causing significant morbidity and mortality every year and threatening the human population with epidemics and pandemics. Therefore, it is important to understand the biology of this virus to develop strategies to control its pathogenicity. Here, we...

  7. Effector Protein Cig2 Decreases Host Tolerance of Infection by Directing Constitutive Fusion of Autophagosomes with the Coxiella-Containing Vacuole

    Directory of Open Access Journals (Sweden)

    Lara J. Kohler

    2016-07-01

    Full Text Available Coxiella burnetii replicates in an acidified lysosome-derived vacuole. Biogenesis of the Coxiella-containing vacuole (CCV requires bacterial effector proteins delivered into host cells by the Dot/Icm secretion system. Genetic and cell biological analysis revealed that an effector protein called Cig2 promotes constitutive fusion of autophagosomes with the CCV to maintain this compartment in an autolysosomal stage of maturation. This distinguishes the CCV from other pathogen-containing vacuoles that are targeted by the host autophagy pathway, which typically confers host resistance to infection by delivering the pathogen to a toxic lysosomal environment. By maintaining the CCV in an autolysosomal stage of maturation, Cig2 enabled CCV homotypic fusion and enhanced bacterial virulence in the Galleria mellonella (wax moth model of infection by a mechanism that decreases host tolerance. Thus, C. burnetii residence in an autolysosomal organelle alters host tolerance of infection, which indicates that Cig2-dependent manipulation of a lysosome-derived vacuole influences the host response to infection.

  8. Block Fusion Systems and the Center of the Group Ring

    DEFF Research Database (Denmark)

    Jacobsen, Martin Wedel

    This thesis develops some aspects of the theory of block fusion systems. Chapter 1 contains a brief introduction to the group algebra and some simple results about algebras over a field of positive characteristic. In chapter 2 we define the concept of a fusion system and the fundamental property ...... algebra is one-dimensional. Chapter 4 consists of a proof that block fusion systems of symmetric groups are always group fusion systems of symmetric groups, and an analogous result holds for the alternating groups.......This thesis develops some aspects of the theory of block fusion systems. Chapter 1 contains a brief introduction to the group algebra and some simple results about algebras over a field of positive characteristic. In chapter 2 we define the concept of a fusion system and the fundamental property...... of saturation. We also define block fusion systems and prove that they are saturated. Chapter 3 develops some tools for relating block fusion systems to the structure of the center of the group algebra. In particular, it is proven that a block has trivial defect group if and only if the center of the block...

  9. Do plastids in Dendrobium cv. Lucky Duan petals function similar to autophagosomes and autolysosomes

    NARCIS (Netherlands)

    Doorn, van W.J.; Kirasak, K.; Sonong, A.; Srihiran, Y.; Lent, van J.W.M.; Ketsa, S.

    2011-01-01

    In animal cells a double-membrane-bound structure, the autophagosome, encloses a portion of the cytoplasm. The encapsulated material becomes digested after fusion of the autophagosome with a vesicle containing lytic enzymes. The autophagosome is then termed autolysosome. In intact plants, structures

  10. Autophagosomes and human diseases.

    Science.gov (United States)

    Beau, Isabelle; Mehrpour, Maryam; Codogno, Patrice

    2011-04-01

    The autophagosome is a double-membrane bound compartment that initiates macroautophagy, a degradative pathway for cytoplasmic material terminating in the lysosomal compartment. The discovery of ATG genes involved in the formation of autophagosomes has greatly increased our understanding of the molecular basis of macroautophagy, and its role in cell function. Macroautophagy plays a pivotal role in cell fitness by removing obsolete organelles and protein aggregates. Its stimulation is an adaptive response to stressful situations, such as nutrient deprivation, intended to maintain a level of ATP compatible with cell survival. Macroautophagy is central for organ homeostasis, embryonic development, and longevity. Malfunctioning autophagy is observed in many human diseases including cancer, neurodegenerative diseases, cardiac and muscular diseases, infectious and inflammatory diseases, diabetes, and obesity. Discovering potential drug therapies that can be used to modulate macroautophagy is a major challenge, and likely to enhance the therapeutic arsenal against many human diseases. PMID:21256243

  11. Inhibition of ESAT6 and CFP10 fusion proteins on the autophagosomes formation of macrophages%ESAT6和CFP10融合蛋白抑制巨噬细胞自噬体形成的实验研究

    Institute of Scientific and Technical Information of China (English)

    师长宏; 毛峰峰; 赵勇; 张海; 张彩琴; 白冰; 赵善民

    2011-01-01

    The objective of this study was to study the inhibition of ESAT6 and CFP10 fusion protein on the autophagosomes formation of macrophages. Following the infection with M. tuberculosis H37Rv strains, autophagosomes of macrophages were induced by rapamycin and the effects of ESAT6-CFP10 fusion protein on the autophagosomes formation were observed by transmission electron microscope. Macrophages cellular mRNAs and proteins were extracted and the expression of autophagyrelated genes (atg) was detected by real-time quantitative PCR and immunoblot method respectively. Results demonstrated that macrophages could form autophagosomes by rapamycin inductio, which having scavenging effect on the M. tuberculosis infected cells. ESAT6-CFP10 fusion proteins could inhibit autophagosome formation in macrophages, significantly increase M. tuberculosis colony forming units (CFU) (P<0.05) and decrease the expression of atgs, especially changing atg8 expression level obviously (P<0.05). The result suggested that ESAT6-CFP10 fusion protein could inhibit the formation of autophagosomes and resist phagocytize by regulating the expression level of atg protein.%目的 观察ESAT6和CFP10融合蛋白对感染MTB的巨噬细胞自噬体形成的抑制作用.方法 雷帕霉素诱导小鼠巨噬细胞自噬体形成后,用MTB毒株H37Rv感染巨噬细胞,再用25μg/mL的ESAT6-CFP10融合蛋白作用于巨噬细胞,电镜观察自噬体相成的变化,计数MTB的菌落数.提取巨噬细胞总RNA和蛋白,以RT-PCR和免疫印迹方法检测自噬相关基因(atg)表达水平的变化.结果 ESAT6-CFP10融合蛋白后可抑制巨噬细胞中自噬体的形成,显著提高CFU指数(P<0.05),并导致atg分子表达水平下降,其中atg8表达量下降最为明显(P<0.05).结论 ESAT6和CFP10融合蛋白可通过调控atg表达水平影响巨噬细胞自噬功能.

  12. Unconventional secretion by autophagosome exocytosis

    OpenAIRE

    Pfeffer, Suzanne R

    2010-01-01

    In this issue, Duran et al. (2010. J. Cell Biol. doi: 10.1083/jcb.200911154) and Manjithaya et al. (2010. J. Cell Biol. doi: 10.1083/jcb.200911149) use yeast genetics to reveal a role for autophagosome intermediates in the unconventional secretion of an acyl coenzyme A (CoA)–binding protein that lacks an endoplasmic reticulum signal sequence. Medium-chain acyl CoAs are also required and may be important for substrate routing to this pathway.

  13. Hepatic steatosis inhibits autophagic proteolysis via impairment of autophagosomal acidification and cathepsin expression

    Energy Technology Data Exchange (ETDEWEB)

    Inami, Yoshihiro [Department of Gastroenterology, Juntendo University School of Medicine, Hongo 2-1-1, Bunkyo-ku, Tokyo 113-8421 (Japan); Yamashina, Shunhei, E-mail: syamashi@juntendo.ac.jp [Department of Gastroenterology, Juntendo University School of Medicine, Hongo 2-1-1, Bunkyo-ku, Tokyo 113-8421 (Japan); Izumi, Kousuke [Department of Gastroenterology, Juntendo University School of Medicine, Hongo 2-1-1, Bunkyo-ku, Tokyo 113-8421 (Japan); Ueno, Takashi [Department of Biochemistry, Juntendo University School of Medicine, Hongo 2-1-1, Bunkyo-ku, Tokyo 113-8421 (Japan); Tanida, Isei [Department of Biochemistry and Cell Biology, Laboratory of Biomembranes, National Institute of Infectious Disease, Toyama 1-23-1, Shinjuku-ku, Tokyo 162-8640 (Japan); Ikejima, Kenichi; Watanabe, Sumio [Department of Gastroenterology, Juntendo University School of Medicine, Hongo 2-1-1, Bunkyo-ku, Tokyo 113-8421 (Japan)

    2011-09-09

    Highlights: {yields} Acidification of autophagosome was blunted in steatotic hepatocytes. {yields} Hepatic steatosis did not disturb fusion of isolated autophagosome and lysosome. {yields} Proteinase activity of cathepsin B and L in autolysosomes was inhibited by steatosis. {yields} Hepatic expression of cathepsin B and L was suppressed by steatosis. -- Abstract: Autophagy, one of protein degradation system, contributes to maintain cellular homeostasis and cell defense. Recently, some evidences indicated that autophagy and lipid metabolism are interrelated. Here, we demonstrate that hepatic steatosis impairs autophagic proteolysis. Though accumulation of autophagosome is observed in hepatocytes from ob/ob mice, expression of p62 was augmented in liver from ob/ob mice more than control mice. Moreover, degradation of the long-lived protein leucine was significantly suppressed in hepatocytes isolated from ob/ob mice. More than 80% of autophagosomes were stained by LysoTracker Red (LTR) in hepatocytes from control mice; however, rate of LTR-stained autophagosomes in hepatocytes were suppressed in ob/ob mice. On the other hand, clearance of autolysosomes loaded with LTR was blunted in hepatocytes from ob/ob mice. Although fusion of isolated autophagosome and lysosome was not disturbed, proteinase activity of cathepsin B and L in autolysosomes and cathepsin B and L expression of liver were suppressed in ob/ob mice. These results indicate that lipid accumulation blunts autophagic proteolysis via impairment of autophagosomal acidification and cathepsin expression.

  14. Hepatic steatosis inhibits autophagic proteolysis via impairment of autophagosomal acidification and cathepsin expression

    International Nuclear Information System (INIS)

    Highlights: → Acidification of autophagosome was blunted in steatotic hepatocytes. → Hepatic steatosis did not disturb fusion of isolated autophagosome and lysosome. → Proteinase activity of cathepsin B and L in autolysosomes was inhibited by steatosis. → Hepatic expression of cathepsin B and L was suppressed by steatosis. -- Abstract: Autophagy, one of protein degradation system, contributes to maintain cellular homeostasis and cell defense. Recently, some evidences indicated that autophagy and lipid metabolism are interrelated. Here, we demonstrate that hepatic steatosis impairs autophagic proteolysis. Though accumulation of autophagosome is observed in hepatocytes from ob/ob mice, expression of p62 was augmented in liver from ob/ob mice more than control mice. Moreover, degradation of the long-lived protein leucine was significantly suppressed in hepatocytes isolated from ob/ob mice. More than 80% of autophagosomes were stained by LysoTracker Red (LTR) in hepatocytes from control mice; however, rate of LTR-stained autophagosomes in hepatocytes were suppressed in ob/ob mice. On the other hand, clearance of autolysosomes loaded with LTR was blunted in hepatocytes from ob/ob mice. Although fusion of isolated autophagosome and lysosome was not disturbed, proteinase activity of cathepsin B and L in autolysosomes and cathepsin B and L expression of liver were suppressed in ob/ob mice. These results indicate that lipid accumulation blunts autophagic proteolysis via impairment of autophagosomal acidification and cathepsin expression.

  15. ERES : sites for autophagosome biogenesis and maturation?

    NARCIS (Netherlands)

    Sanchez-Wandelmer, Jana; Ktistakis, Nicholas T; Reggiori, Fulvio

    2015-01-01

    Autophagosomes are the hallmark of autophagy, but despite their central role in this degradative pathway that involves vesicle transport to lysosomes or vacuoles, the mechanism underlying their biogenesis still remains largely unknown. Our current concepts about autophagosome biogenesis are based on

  16. Braiding and fusion properties of the Neveu-Schwarz super-conformal blocks

    CERN Document Server

    Chorazkiewicz, Damian

    2009-01-01

    We construct, generalizing appropriately the method applied by J. Teschner in the case of the Virasoro conformal blocks, the braiding and fusion matrices of the Neveu-Schwarz super-conformal blocks. Their properties allow for an explicit verification of the bootstrap equation in the NS sector of the N=1 supersymmetric Liouville field theory.

  17. Avalanche boron fusion by laser picosecond block ignition with magnetic trapping for clean and economic reactor

    OpenAIRE

    Hora, H.; Korn, G.; Eliezer, S.; Lalousis, N. Nissim P.; Giuffrida, L.; Margarone, D.; Picciotto, A; Miley, G.H.; Moustaizis, S.; Martinez-Val, J. -M.; Barty, C.P.J.; Kirchhoff, G. J.

    2016-01-01

    After the very long consideration of the ideal energy source by fusion of the protons of light hydrogen with the boron isotope 11 (boron fusion HB11) the very first two independent measurements of very high reaction gains by lasers basically opens a fundamental breakthrough. The non-thermal plasma block ignition with extremely high power laser pulses above petawatt of picosecond duration in combination with up to ten kilotesla magnetic fields for trapping has to be combined to use the measure...

  18. On the fusion matrix of the N=1 Neveu-Schwarz blocks

    CERN Document Server

    Hadasz, Leszek

    2007-01-01

    We propose an exact form of the fusion matrix of the Neveu-Schwarz blocks that appear in a correlation function of four super-primary fields. Orthogonality relation satisfied by this matrix is equivalent to the bootstrap equation for the four-point super-primary correlator in the N=1 supersymmetric Liouville theory.

  19. Block Fusion on Dynamically Adaptive Spacetree Grids for Shallow Water Waves

    KAUST Repository

    Weinzierl, Tobias

    2014-09-01

    © 2014 World Scientific Publishing Company. Spacetrees are a popular formalism to describe dynamically adaptive Cartesian grids. Even though they directly yield a mesh, it is often computationally reasonable to embed regular Cartesian blocks into their leaves. This promotes stencils working on homogeneous data chunks. The choice of a proper block size is sensitive. While large block sizes foster loop parallelism and vectorisation, they restrict the adaptivity\\'s granularity and hence increase the memory footprint and lower the numerical accuracy per byte. In the present paper, we therefore use a multiscale spacetree-block coupling admitting blocks on all spacetree nodes. We propose to find sets of blocks on the finest scale throughout the simulation and to replace them by fused big blocks. Such a replacement strategy can pick up hardware characteristics, i.e. which block size yields the highest throughput, while the dynamic adaptivity of the fine grid mesh is not constrained - applications can work with fine granular blocks. We study the fusion with a state-of-the-art shallow water solver at hands of an Intel Sandy Bridge and a Xeon Phi processor where we anticipate their reaction to selected block optimisation and vectorisation.

  20. Autophagosome formation: not necessarily an inside job

    Institute of Scientific and Technical Information of China (English)

    Andrea Longatti; Andrea Orsi; Sharon A Tooze

    2010-01-01

    Autophagy is a highly conserved degradative process characterized by the formation of double membrane vesicles called autophagosomes. Autophagy occurs at a basal level in most cells and can be rapidly induced under stress conditions such as amino acid starvation. In multicellular organisms autophagy also plays a role in development, immunity, aging, and tissue homeostasis [1].

  1. Mitotic phosphorylation of VCIP135 blocks p97ATPase-mediated Golgi membrane fusion

    Energy Technology Data Exchange (ETDEWEB)

    Totsukawa, Go; Matsuo, Ayaka; Kubota, Ayano; Taguchi, Yuya; Kondo, Hisao, E-mail: hk228@med.kyushu-u.ac.jp

    2013-04-05

    Highlights: •VCIP135 is mitotically phosphorylated on Threonine-760 and Serine-767 by Cdc2. •Phosphorylated VCIP135 does not bind to p97ATPase. •The phosphorylation of VCIP135 inhibits p97ATPase-mediated Golgi membrane fusion. -- Abstract: In mammals, the Golgi apparatus is disassembled early mitosis and reassembled at the end of mitosis. For Golgi disassembly, membrane fusion needs to be blocked. Golgi biogenesis requires two distinct p97ATPase-mediated membrane fusion, the p97/p47 and p97/p37 pathways. We previously reported that p47 phosphorylation on Serine-140 and p37 phosphorylation on Serine-56 and Threonine-59 result in mitotic inhibition of the p97/p47 and the p97/p37 pathways, respectively [11,14]. In this study, we show another mechanism of mitotic inhibition of p97-mediated Golgi membrane fusion. We clarified that VCIP135, an essential factor in both p97 membrane fusion pathways, is phosphorylated on Threonine-760 and Serine-767 by Cdc2 at mitosis and that this phosphorylated VCIP135 does not bind to p97. An in vitro Golgi reassembly assay revealed that VCIP135(T760E, S767E), which mimics mitotic phosphorylation, caused no cisternal regrowth. Our results indicate that the phosphorylation of VCIP135 on Threonine-760 and Serine-767 inhibits p97-mediated Golgi membrane fusion at mitosis.

  2. Ultrasound/Magnetic Resonance Image Fusion Guided Lumbosacral Plexus Block – A Clinical Study

    DEFF Research Database (Denmark)

    Strid, JM; Pedersen, Erik Morre; Søballe, Kjeld;

    2014-01-01

    included in a double-blinded randomized controlled trial with crossover design. MR datasets will be acquired and uploaded in an advanced US system (Epiq7, Phillips, Amsterdam, Netherlands). All volunteers will receive SSPS blocks with lidocaine added gadolinium contrast guided by US/MR image fusion and by......Background and aims Ultrasound (US) guided lumbosacral plexus block (Supra Sacral Parallel Shift [SSPS]) offers an alternative to general anaesthesia and perioperative analgesia for hip surgery.1 The complex anatomy of the lumbosacral region hampers the accuracy of the block, but it may be improved...... US one week apart. The block of the L2-S1 nerves, the plasma lidocaine, and the anatomical distribution of lidocaine will be assessed with neurological mapping, pharmacokinetic assays, and MR visualisation and compared. We are awaiting the final ethical approval of the study. Results On going study...

  3. Avalanche boron fusion by laser picosecond block ignition with magnetic trapping for clean and economic reactor

    CERN Document Server

    Hora, H; Eliezer, S; Lalousis, N Nissim P; Giuffrida, L; Margarone, D; Picciotto, A; Miley, G H; Moustaizis, S; Martinez-Val, J -M; Barty, C P J; Kirchhoff, G J

    2016-01-01

    After the very long consideration of the ideal energy source by fusion of the protons of light hydrogen with the boron isotope 11 (boron fusion HB11) the very first two independent measurements of very high reaction gains by lasers basically opens a fundamental breakthrough. The non-thermal plasma block ignition with extremely high power laser pulses above petawatt of picosecond duration in combination with up to ten kilotesla magnetic fields for trapping has to be combined to use the measured high gains as proof of an avalanche reaction for an environmentally clean, low cost and lasting energy source as potential option against global warming. The unique HB11 avalanche reaction is are now based on elastic collisions of helium nuclei (alpha particles) limited only to a reactor for controlled fusion energy during a very short time within a very small volume.

  4. Picosecond-petawatt laser-block ignition of avalanche boron fusion by ultrahigh acceleration and ultrahigh magnetic fields

    CERN Document Server

    Hora, Heinrich

    2015-01-01

    In contrast to the thermal laser-plasma interaction for fusion by nanosecond pulses, picosecond pulses offer a fundamentally different non-thermal direct conversion of laser energy into ultrahigh acceleration of plasma blocks. This allows to ignite boron fusion which otherwise is most difficult. Trapping by kilotesla magnetic fields and avalanche ignition leads to environmentally clean and economic energy generation.

  5. Alteration of Dynein Function Affects α-Synuclein Degradation via the Autophagosome-Lysosome Pathway

    OpenAIRE

    Da Li; Ji-Jun Shi; Cheng-Jie Mao; Sha Liu; Jian-Da Wang; Jing Chen; Fen Wang; Ya-Ping Yang; Wei-Dong Hu; Li-Fang Hu; Chun-Feng Liu

    2013-01-01

    Growing evidence suggests that dynein dysfunction may be implicated in the pathogenesis of neurodegeneration. It plays a central role in aggresome formation, the delivery of autophagosome to lysosome for fusion and degradation, which is a pro-survival mechanism essential for the bulk degradation of misfolded proteins and damaged organells. Previous studies reported that dynein dysfuntion was associated with aberrant aggregation of α-synuclein, which is a major component of inclusion bodies in...

  6. Improved Block Based Feature Level Image Fusion Technique Using Contourlet with Neural Network

    Directory of Open Access Journals (Sweden)

    C.M.Sheela Rani

    2012-08-01

    Full Text Available As multisensory data is made available in many areas such as remote sensing, medical imaging, etc, the sensor fusion has become a new field for research. Multisensor image fusion mainly focuses on combining spatial information of a high resolution panchromatic (PAN image with spectral information of a low resolution multispectral image (MS to produce an image with highest spatial content while preserving spectral resolution. A geometrical transform called contourlet transform (CT is introduced, which represents images containing contours and textures. This paper derived an efficient block based feature level contourlet transform with neural network (BFCN model for image fusion. The proposed BFCN model integrates CT with neural network (NN, which plays a significant role in feature extraction and detection in machine learning applications. In the proposed BFCN model, the two fusion techniques, CT and NN are discussed for fusing the IRS-1D images using LISS III scanner about the locations Hyderabad, Vishakhapatnam, Mahaboobnagar and Patancheru in Andhra Pradesh, India. Also Landsat 7 image data and QuickBird image data are used to perform experiments on the proposed BFCN model. The features under study are contrast visibility, spatial frequency, energy of gradient, variance and edge information. Feed forward back propagation neural network is trained and tested for classification, since the learning capability of NN makes it feasible to customize the image fusion process. The trained NN is then used to fuse the pair of source images. The proposed BFCN model is compared with other techniques to assess the quality of the fused image. Experimental results clearly prove that the proposed BFCN model is an efficient and feasible algorithm for image fusion.

  7. Improved Block Based Feature Level Image Fusion Technique Using Contourlet with Neural Network

    Directory of Open Access Journals (Sweden)

    C.M.Sheela Rani

    2012-09-01

    Full Text Available As multisensory data is made available in many areas such as remote sensing, medical imaging, etc, thesensor fusion has become a new field for research. Multisensor image fusion mainly focuses on combining spatial information of a high resolution panchromatic (PAN image with spectral information of a low resolution multispectral image (MS to produce an image with highest spatial content while preserving spectral resolution. A geometrical transform called contourlet transform (CT is introduced, which represents images containing contours and textures. This paper derived an efficient block based feature level contourlet transform with neural network (BFCN model for image fusion. The proposed BFCN model integrates CT with neural network (NN, which plays a significant role in feature extraction and detection in machine learning applications. In the proposed BFCN model, the two fusion techniques, CT and NN are discussed for fusing the IRS-1D images using LISS III scanner about the locations Hyderabad, Vishakhapatnam, Mahaboobnagar and Patancheru in Andhra Pradesh, India. Also Landsat 7 image data and QuickBird image data are used to perform experiments on the proposed BFCN model. The features under study are contrast visibility, spatial frequency, energy of gradient, variance and edge information. Feed forward back propagation neural network is trained and tested for classification, since the learning capability of NN makes it feasible to customize the image fusion process. The trained NN is then used to fuse the pair of source images. The proposed BFCN model is compared with other techniques to assess the quality of the fused image. Experimental results clearly prove that the proposed BFCN model is an efficient and feasible algorithm for image fusion.

  8. A peptide fusion protein in hibits angiogenesis and tumorgrowth by blocking VEGF binding to KDR

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Vascular endothelial growth factor (VEGF) binding to its tyrosine kinase receptors (KDR/FLK1, Flt-1) induces angiogenesis. In search of the peptides blocking VEGF binding to its receptor KDR/FLK1 to inhibit tumor- angiogenesis and growth, we screened a phage display peptide library with KDR as target protein, and some candidate peptides were isolated. In this study, we cloned the DNA fragment coding the peptide K237 from the library, into a vector pQE42 to express fusion protein DHFR-K237 in E. coli M15. The affection of fusion protein DHFR-K237 on endothelial cell proliferation and angiogenesis was investigated. In vitro, DHFR-K237 could completely block VEGF binding to KDR and significantly inhibit the VEGF-medi- ated proliferation of the human vascular endothelial cells. In vivo, DHFR-K237 inhibited angiogenesis in chick embryo chorioa- llantoric membrane and tumor growth in nude mice. These results suggest that K237 is an effective antagonist of VEGF binding to KDR, and could be a potential agent for cancer biotherapy.

  9. Picosecond-petawatt laser-block ignition of avalanche boron fusion by ultrahigh acceleration and ultrahigh magnetic fields

    OpenAIRE

    Hora, H.; Lalousis, P.; Giuffrida, L.; Margarone, D.; Korn, G.; Eliezer, S.; Mley, G. H.; Moustizis, S.; Mourou, G.; Barty, C.P.J.

    2015-01-01

    Fusion energy from reacting hydrogen (protons) with the boron isotope 11 (HB11) resulting in three stable helium nuclei, is without problem of nuclear radiation in contrast to DT fusion. But the HB11 reaction driven by nanosecond laser pulses with thermal compression and ignition by lasers is extremely difficult. This changed radically when irradiation with picosecond laser pulses produces a non-thermal plasma block ignition with ultrahigh acceleration. This uses the nonlinear (ponderomotive)...

  10. Understanding phosphatidylinositol-3-phosphate dynamics during autophagosome biogenesis

    NARCIS (Netherlands)

    E. Cebollero (Eduardo); A. van der Vaart (Aniek); F. Reggiori (Fulvio)

    2012-01-01

    textabstractAutophagosomes, the hallmark of autophagy, are double-membrane vesicles sequestering cytoplasmic components. They are generated at the phagophore assembly site (PAS), the phagophore being the precursor structure of these carriers. According to the current model, autophagosomes result fro

  11. A genetic model with specifically impaired autophagosome–lysosome fusion

    OpenAIRE

    Takáts, Szabolcs; Juhász, Gábor

    2013-01-01

    Yeast studies identified the evolutionarily conserved core ATG genes responsible for autophagosome formation. However, the SNARE-dependent machinery involved in autophagosome fusion with the vacuole in yeast is not conserved. We recently reported that the SNARE complex consisting of Syx17 (Syntaxin 17), ubisnap (SNAP-29) and Vamp7 is required for the fusion of autophagosomes with late endosomes and lysosomes in Drosophila. Syx17 mutant flies are viable but exhibit neuronal dysfunction, locomo...

  12. Picosecond-petawatt laser-block ignition for avalanche fusion of boron by ultrahigh acceleration and ultrahigh magnetic fields

    Science.gov (United States)

    Hora, H.; Lalousis, P.; Giuffrida, L.; Margarone, D.; Korn, G.; Eliezer, S.; Miley, G. H.; Moustaizis, S.; Mourou, G.; Barty, C. P. J.

    2016-05-01

    Fusion energy from reacting hydrogen (protons) with the boron isotope 11 (HB11) resulting in three stable helium nuclei, is without problem of nuclear radiation in contrast to DT fusion. But the HB11 reaction driven by nanosecond laser pulses with thermal compression and ignition by lasers is extremely difficult. This changed radically when irradiation with picosecond laser pulses produces a non-thermal plasma block ignition with ultrahigh acceleration. This uses the nonlinear (ponderomotive) force to surprizingly resulting in same thresholds as DT fusion even under pessimistic assumption of binary reactions. After evaluation of reactions trapped cylindrically by kilotesla magnetic fields and using the measured highly increased HB11 fusion gains for the proof of an avalanche of the three alphas in secondary reactions, possibilities for an absolutely clean energy source at comptitive costs were concluded.

  13. IFITM3 restricts influenza A virus entry by blocking the formation of fusion pores following virus-endosome hemifusion.

    Directory of Open Access Journals (Sweden)

    Tanay M Desai

    2014-04-01

    Full Text Available Interferon-induced transmembrane proteins (IFITMs inhibit infection of diverse enveloped viruses, including the influenza A virus (IAV which is thought to enter from late endosomes. Recent evidence suggests that IFITMs block virus hemifusion (lipid mixing in the absence of viral content release by altering the properties of cell membranes. Consistent with this mechanism, excess cholesterol in late endosomes of IFITM-expressing cells has been reported to inhibit IAV entry. Here, we examined IAV restriction by IFITM3 protein using direct virus-cell fusion assay and single virus imaging in live cells. IFITM3 over-expression did not inhibit lipid mixing, but abrogated the release of viral content into the cytoplasm. Although late endosomes of IFITM3-expressing cells accumulated cholesterol, other interventions leading to aberrantly high levels of this lipid did not inhibit virus fusion. These results imply that excess cholesterol in late endosomes is not the mechanism by which IFITM3 inhibits the transition from hemifusion to full fusion. The IFITM3's ability to block fusion pore formation at a post-hemifusion stage shows that this protein stabilizes the cytoplasmic leaflet of endosomal membranes without adversely affecting the lumenal leaflet. We propose that IFITM3 interferes with pore formation either directly, through partitioning into the cytoplasmic leaflet of a hemifusion intermediate, or indirectly, by modulating the lipid/protein composition of this leaflet. Alternatively, IFITM3 may redirect IAV fusion to a non-productive pathway, perhaps by promoting fusion with intralumenal vesicles within multivesicular bodies/late endosomes.

  14. How positive-strand RNA viruses benefit from autophagosome maturation.

    Science.gov (United States)

    Richards, Alexsia L; Jackson, William T

    2013-09-01

    The autophagic degradation pathway is a powerful tool in the host cell arsenal against cytosolic pathogens. Contents trapped inside cytosolic vesicles, termed autophagosomes, are delivered to the lysosome for degradation. In spite of the degradative nature of the pathway, some pathogens are able to subvert autophagy for their benefit. In many cases, these pathogens have developed strategies to induce the autophagic signaling pathway while inhibiting the associated degradation activity. One surprising finding from recent literature is that some viruses do not impede degradation but instead promote the generation of degradative autolysosomes, which are the endpoint compartments of autophagy. Dengue virus, poliovirus, and hepatitis C virus, all positive-strand RNA viruses, utilize the maturation of autophagosomes into acidic and ultimately degradative compartments to promote their replication. While the benefits that each virus reaps from autophagosome maturation are unique, the parallels between the viruses indicate a complex relationship between cytosolic viruses and host cell degradation vesicles. PMID:23760248

  15. Fusion

    CERN Document Server

    Mahaffey, James A

    2012-01-01

    As energy problems of the world grow, work toward fusion power continues at a greater pace than ever before. The topic of fusion is one that is often met with the most recognition and interest in the nuclear power arena. Written in clear and jargon-free prose, Fusion explores the big bang of creation to the blackout death of worn-out stars. A brief history of fusion research, beginning with the first tentative theories in the early 20th century, is also discussed, as well as the race for fusion power. This brand-new, full-color resource examines the various programs currently being funded or p

  16. Defining and measuring autophagosome flux—concept and reality.

    Science.gov (United States)

    Loos, Ben; du Toit, André; Hofmeyr, Jan-Hendrik S

    2014-01-01

    The autophagic system is involved in both bulk degradation of primarily long-lived cytoplasmic proteins as well as in selective degradation of cytoplasmic organelles. Autophagic flux is often defined as a measure of autophagic degradation activity, and a number of methods are currently utilized to assess autophagic flux. However, despite major advances in measuring various molecular aspects of the autophagic machinery, we remain less able to express autophagic flux in a highly sensitive, robust, and well-quantifiable manner. Here, we describe a conceptual framework for defining and measuring autophagosome flux at the single-cell level. The concept discussed here is based on the theoretical framework of metabolic control analysis, which distinguishes between the pathway along which there is a flow of material and the quantitative measure of this flow. By treating the autophagic system as a multistep pathway with each step characterized by a particular rate, we are able to provide a single-cell fluorescence live-cell imaging-based approach that describes the accurate assessment of the complete autophagosome pool size, the autophagosome flux, and the transition time required to turn over the intracellular autophagosome pool. In doing so, this perspective provides clarity on whether the system is at steady state or in a transient state moving towards a new steady state. It is hoped that this theoretical account of quantitatively measuring autophagosome flux may contribute towards a new direction in the field of autophagy, a standardized approach that allows the establishment of systematic flux databases of clinically relevant cell and tissue types that serve as important model systems for human pathologies. PMID:25484088

  17. In depth fusion flame spreading with a deuterium-tritium plane fuel density profile for plasma block ignition

    Institute of Scientific and Technical Information of China (English)

    B.Malekynia; S.S.Razavipour

    2012-01-01

    Solid-state fuel ignition was given by Chu and Bobin according to the hydrodynamic theory at x =0 qualitatively.A high threshold energy flux density,i.e.,E* =4.3 x 1012 J/m2,has been reached.Recently,fast ignition by employing clean petawatt-picosecond laser pulses was performed.The anomalous phenomena were observed to be based on suppression of prepulses.The accelerated plasma block was used to ignite deuterium-tritium fuel at solid-state density.The detailed analysis of the thermonuclear wave propagation was investigated.Also the fusion conditions at x ≠ 0 layers were clarified by exactly solving hydrodynamic equations for plasma block ignition.In this paper,the applied physical mechanisms are determined for nonlinear force laser driven plasma blocks,thermonuclear reaction,heat transfer,electron-ion equilibration,stopping power of alpha particles,bremsstrahlung,expansion,density dependence,and fluid dynamics.New ignition conditions may be obtained by using temperature equations,including thc dcnsity profile that is obtained by the continuity equation and expansion velocity.The density is only a function of x and independent of time.The ignition energy flux density,E*t,for the x ≠ 0 layers is 1.95 × 1012 J/m2.Thus threshold ignition energy in comparison with that at x =0 layers would be reduced to less than 50 percent.

  18. The autophagosome: current understanding of formation and maturation

    Directory of Open Access Journals (Sweden)

    Mannack LVJC

    2015-02-01

    Full Text Available Lilith VJC Mannack, Jon D Lane Cell Biology Laboratories, School of Biochemistry, University of Bristol, Bristol, UK Abstract: Autophagy is an important and highly conserved catabolic process with roles in development, homeostasis, and cellular stress responses. It describes various distinct pathways for the delivery of cytoplasmic materials (including misfolded protein aggregates and some organelles to the lysosome for degradation and component recycling. The best understood form of autophagy (macroautophagy describes the de novo assembly, maturation, and trafficking of a unique double membrane-bound organelle – the autophagosomes – that sequesters cytoplasmic materials and ultimately merges with the lysosomal compartment to form a degradative autolysosome. To rapidly assemble such a structure in response to stimuli, cells express a family of dedicated autophagy-related (ATG gene products that act sequentially to control membrane events leading first to the nucleation of an isolation membrane or phagophore, followed by phagophore expansion, and sealing to form an autophagosome that traffics to – and ultimately fuses with – the lysosome. These molecules are activated in response to upstream signaling pathways (notably, the mechanistic target of rapamycin [mTOR] pathway, and comprise protein and lipid kinases, putative membrane coats, and unique ubiquitin-like conjugation systems. In concert, a barrage of accessory proteins involved in various membrane trafficking pathways focused on the endosomal compartment are co-opted at the assembly site to facilitate autophagosome biogenesis. Understanding the integrated pathways that coordinate autophagosome assembly at the molecular level will be crucial if we are to realize the potential for autophagy manipulation in future disease therapies. Keywords: autophagy, ATG proteins, lysosome, phagophore, omegasome, autolysosome, membrane trafficking, ULK1, mTOR, PI(3 kinase, PI3P, LIR motif

  19. How Positive-Strand RNA Viruses Benefit from Autophagosome Maturation

    OpenAIRE

    Richards, Alexsia L.; Jackson, William T.

    2013-01-01

    The autophagic degradation pathway is a powerful tool in the host cell arsenal against cytosolic pathogens. Contents trapped inside cytosolic vesicles, termed autophagosomes, are delivered to the lysosome for degradation. In spite of the degradative nature of the pathway, some pathogens are able to subvert autophagy for their benefit. In many cases, these pathogens have developed strategies to induce the autophagic signaling pathway while inhibiting the associated degradation activity. One su...

  20. From Comics, Graphic Novels and Picturebooks to Fusion Texts: A New Kid on the Block!

    Science.gov (United States)

    Evans, Janet

    2013-01-01

    There is probably a comic or graphic novel to suit the needs and requirements of all kinds of readers. However, in addition, there is now a new kid on the block! A different kind of book is emerging, one that exhibits some, but not always all, of the characteristics normally thought of as belonging to comics and graphic novels. These books blur…

  1. The anticancer agent di-2-pyridylketone 4,4-dimethyl-3-thiosemicarbazone (Dp44mT) overcomes prosurvival autophagy by two mechanisms: persistent induction of autophagosome synthesis and impairment of lysosomal integrity.

    Science.gov (United States)

    Gutierrez, Elaine; Richardson, Des R; Jansson, Patric J

    2014-11-28

    Autophagy functions as a survival mechanism during cellular stress and contributes to resistance against anticancer agents. The selective antitumor and antimetastatic chelator di-2-pyridylketone 4,4-dimethyl-3-thiosemicarbazone (Dp44mT) causes lysosomal membrane permeabilization and cell death. Considering the integral role of lysosomes in autophagy and cell death, it was important to assess the effect of Dp44mT on autophagy to further understand its mechanism of action. Notably, Dp44mT affected autophagy by two mechanisms. First, concurrent with its antiproliferative activity, Dp44mT increased the expression of the classical autophagic marker LC3-II as a result of induced autophagosome synthesis. Second, this effect was supplemented by a reduction in autophagosome degradation as shown by the accumulation of the autophagic substrate and receptor p62. Conversely, the classical iron chelator desferrioxamine induced autophagosome accumulation only by inhibiting autophagosome degradation. The formation of redox-active iron or copper Dp44mT complexes was critical for its dual effect on autophagy. The cytoprotective antioxidant N-acetylcysteine inhibited Dp44mT-induced autophagosome synthesis and p62 accumulation. Importantly, Dp44mT inhibited autophagosome degradation via lysosomal disruption. This effect prevented the fusion of lysosomes with autophagosomes to form autolysosomes, which is crucial for the completion of the autophagic process. The antiproliferative activity of Dp44mT was suppressed by Beclin1 and ATG5 silencing, indicating the role of persistent autophagosome synthesis in Dp44mT-induced cell death. These studies demonstrate that Dp44mT can overcome the prosurvival activity of autophagy in cancer cells by utilizing this process to potentiate cell death. PMID:25301941

  2. Luteinizing hormone-releasing hormone fusion protein vaccines block estrous cycle activity in beef heifers.

    Science.gov (United States)

    Stevens, J D; Sosa, J M; deAvila, D M; Oatley, J M; Bertrand, K P; Gaskins, C T; Reeves, J J

    2005-01-01

    Two LHRH fusion proteins, thioredoxin and ovalbumin, each containing seven LHRH inserts were tested for their ability to inhibit estrous cycle activity. The objective was to evaluate immune and biological responses from alternating the two fusion proteins in an immunization schedule. One hundred ten heifers were divided equally into 11 groups. Two control groups consisted of either spayed or intact, untreated heifers. Heifers in the other nine groups were immunized on wk 0, 4, and 9. Treatments were immunizations of the same protein throughout or alternating the proteins in different booster sequences. Blood was collected weekly for 22 wk, and serum was assayed for concentrations of progesterone and titers of anti-LHRH. At slaughter, reproductive tracts were removed from each heifer and weighed. Heifers with >or=1 ng/mL of progesterone were considered to have a functional corpus luteum and thus to have estrous cycle activity. All LHRH-immunized groups of heifers had a smaller (P spayed heifers during wk 9 to 22. Anti-LHRH did not differ among immunized groups during wk 1 to 9. Starting at wk 10 and continuing through the conclusion of the study, there was an overall difference among treatment groups for anti-LHRH (P spaying in suppression of estrous cycle activity, but alternating the two proteins in an immunization schedule did not enhance the immunological or biological effectiveness of the vaccine. PMID:15583055

  3. Remote sensing image classification based on block feature point density analysis and multiple-feature fusion

    Science.gov (United States)

    Li, Shijin; Jiang, Yaping; Zhang, Yang; Feng, Jun

    2015-10-01

    With the development of remote sensing (RS) and the related technologies, the resolution of RS images is enhancing. Compared with moderate or low resolution images, high-resolution ones can provide more detailed ground information. However, a variety of terrain has complex spatial distribution. The different objectives of high-resolution images have a variety of features. The effectiveness of these features is not the same, but some of them are complementary. Considering the above information and characteristics, a new method is proposed to classify RS images based on hierarchical fusion of multi-features. Firstly, RS images are pre-classified into two categories in terms of whether feature points are uniformly or non-uniformly distributed. Then, the color histogram and Gabor texture feature are extracted from the uniformly-distributed categories, and the linear spatial pyramid matching using sparse coding (ScSPM) feature is obtained from the non-uniformly-distributed categories. Finally, the classification is performed by two support vector machine classifiers. The experimental results on a large RS image database with 2100 images show that the overall classification accuracy is boosted by 10.1% in comparison with the highest accuracy of single feature classification method. Compared with other multiple-feature fusion methods, the proposed method has achieved the highest classification accuracy on this dataset which has reached 90.1%, and the time complexity of the algorithm is also greatly reduced.

  4. Association of the pr Peptides with Dengue Virus at Acidic pH Blocks Membrane Fusion

    Energy Technology Data Exchange (ETDEWEB)

    Yu, I.-M.; Holdaway, H.A.; Chipman, P.R.; Kuhn, R.J.; Rossmann, M.G.; Chen, J.; Purdue

    2010-07-27

    Flavivirus assembles into an inert particle that requires proteolytic activation by furin to enable transmission to other hosts. We previously showed that immature virus undergoes a conformational change at low pH that renders it accessible to furin (I. M. Yu, W. Zhang, H. A. Holdaway, L. Li, V. A. Kostyuchenko, P. R. Chipman, R. J. Kuhn, M. G. Rossmann, and J. Chen, Science 319:1834-1837, 2008). Here we show, using cryoelectron microscopy, that the structure of immature dengue virus at pH 6.0 is essentially the same before and after the cleavage of prM. The structure shows that after cleavage, the proteolytic product pr remains associated with the virion at acidic pH, and that furin cleavage by itself does not induce any major conformational changes. We also show by liposome cofloatation experiments that pr retention prevents membrane insertion, suggesting that pr is present on the virion in the trans-Golgi network to protect the progeny virus from fusion within the host cell.

  5. A bispecific antibody effectively neutralizes all four serotypes of dengue virus by simultaneous blocking virus attachment and fusion.

    Science.gov (United States)

    Shi, Xin; Deng, Yongqiang; Wang, Huajing; Ji, Guanghui; Tan, Wenlong; Jiang, Tao; Li, Xiaofeng; Zhao, Hui; Xia, Tian; Meng, Yanchun; Wang, Chao; Yu, Xiaojie; Yang, Yang; Li, Bohua; Qin, E-De; Dai, Jianxin; Qin, Cheng-Feng; Guo, Yajun

    2016-01-01

    Although dengue virus (DENV) infection severely threatens the health of humans, no specific antiviral drugs are currently approved for clinical use against DENV infection. Attachment and fusion are 2 critical steps for the flavivirus infection, and the corresponding functional epitopes are located at E protein domain III (E-DIII) and domain II (E-DII), respectively. Here, we constructed a bispecific antibody (DVD-1A1D-2A10) based on the 2 well-characterized anti-DENV monoclonal antibodies 1A1D-2 (1A1D) and 2A10G6 (2A10). The 1A1D antibody binds E-DIII and can block the virus attaching to the cell surface, while the 2A10 antibody binds E-DII and is able to prevent the virus from fusing with the endosomal membrane. Our data showed that DVD-1A1D-2A10 retained the antigen-binding activity of both parental antibodies. Importantly, it was demonstrated to be significantly more effective at neutralizing DENV than its parental antibodies both in vitro and in vivo, even better than the combination of them. To eliminate the potential antibody-dependent enhancement (ADE) effect, this bispecific antibody was successfully engineered to prevent Fc-γ-R interaction. Overall, we generated a bispecific anti-DENV antibody targeting both attachment and fusion stages, and this bispecific antibody broadly neutralized all 4 serotypes of DENV without risk of ADE, suggesting that it has great potential as a novel antiviral strategy against DENV. PMID:26905804

  6. Excess sphingomyelin disturbs ATG9A trafficking and autophagosome closure.

    Science.gov (United States)

    Corcelle-Termeau, Elisabeth; Vindeløv, Signe Diness; Hämälistö, Saara; Mograbi, Baharia; Keldsbo, Anne; Bräsen, Jan Hinrich; Favaro, Elena; Adam, Dieter; Szyniarowski, Piotr; Hofman, Paul; Krautwald, Stefan; Farkas, Thomas; Petersen, Nikolaj H T; Rohde, Mikkel; Linkermann, Andreas; Jäättelä, Marja

    2016-05-01

    Sphingomyelin is an essential cellular lipid that traffics between plasma membrane and intracellular organelles until directed to lysosomes for SMPD1 (sphingomyelin phosphodiesterase 1)-mediated degradation. Inactivating mutations in the SMPD1 gene result in Niemann-Pick diseases type A and B characterized by sphingomyelin accumulation and severely disturbed tissue homeostasis. Here, we report that sphingomyelin overload disturbs the maturation and closure of autophagic membranes. Niemann-Pick type A patient fibroblasts and SMPD1-depleted cancer cells accumulate elongated and unclosed autophagic membranes as well as abnormally swollen autophagosomes in the absence of normal autophagosomes and autolysosomes. The immature autophagic membranes are rich in WIPI2, ATG16L1 and MAP1LC3B but display reduced association with ATG9A. Contrary to its normal trafficking between plasma membrane, intracellular organelles and autophagic membranes, ATG9A concentrates in transferrin receptor-positive juxtanuclear recycling endosomes in SMPD1-deficient cells. Supporting a causative role for ATG9A mistrafficking in the autophagy defect observed in SMPD1-deficient cells, ectopic ATG9A effectively reverts this phenotype. Exogenous C12-sphingomyelin induces a similar juxtanuclear accumulation of ATG9A and subsequent defect in the maturation of autophagic membranes in healthy cells while the main sphingomyelin metabolite, ceramide, fails to revert the autophagy defective phenotype in SMPD1-deficient cells. Juxtanuclear accumulation of ATG9A and defective autophagy are also evident in tissues of smpd1-deficient mice with a subsequent inability to cope with kidney ischemia-reperfusion stress. These data reveal sphingomyelin as an important regulator of ATG9A trafficking and maturation of early autophagic membranes. PMID:27070082

  7. Viral mediated redirection of NEMO/IKKγ to autophagosomes curtails the inflammatory cascade.

    Directory of Open Access Journals (Sweden)

    Patricia M Fliss

    2012-02-01

    Full Text Available The early host response to viral infections involves transient activation of pattern recognition receptors leading to an induction of inflammatory cytokines such as interleukin-1β (IL-1β and tumor necrosis factor α (TNFα. Subsequent activation of cytokine receptors in an autocrine and paracrine manner results in an inflammatory cascade. The precise mechanisms by which viruses avert an inflammatory cascade are incompletely understood. Nuclear factor (NF-κB is a central regulator of the inflammatory signaling cascade that is controlled by inhibitor of NF-κB (IκB proteins and the IκB kinase (IKK complex. In this study we show that murine cytomegalovirus inhibits the inflammatory cascade by blocking Toll-like receptor (TLR and IL-1 receptor-dependent NF-κB activation. Inhibition occurs through an interaction of the viral M45 protein with the NF-κB essential modulator (NEMO, the regulatory subunit of the IKK complex. M45 induces proteasome-independent degradation of NEMO by targeting NEMO to autophagosomes for subsequent degradation in lysosomes. We propose that the selective and irreversible degradation of a central regulatory protein by autophagy represents a new viral strategy to dampen the inflammatory response.

  8. Identification of autophagosome-associated proteins and regulators by quantitative proteomic analysis and genetic screens

    DEFF Research Database (Denmark)

    Dengjel, Jörn; Høyer-Hansen, Maria; Nielsen, Maria O;

    2012-01-01

    Autophagy is one of the major intracellular catabolic pathways, but little is known about the composition of autophagosomes. To study the associated proteins, we isolated autophagosomes from human breast cancer cells using two different biochemical methods and three stimulus types: amino acid......, and the activation of autophagy significantly decreased the cellular proteasome level and activity supporting interplay between the two degradation pathways. A screen of yeast strains defective in the orthologs of the human genes encoding for a common set of autophagosome-associated proteins revealed several...... regulators of autophagy, including subunits of the retromer complex. The combined spatiotemporal proteomic and genetic data sets presented here provide a basis for further characterization of autophagosome biogenesis and cargo selection....

  9. Exocyst-Positive Organelles and Autophagosomes Are Distinct Organelles in Plants.

    Science.gov (United States)

    Lin, Youshun; Ding, Yu; Wang, Juan; Shen, Jinbo; Kung, Chun Hong; Zhuang, Xiaohong; Cui, Yong; Yin, Zhao; Xia, Yiji; Lin, Hongxuan; Robinson, David G; Jiang, Liwen

    2015-11-01

    Autophagosomes are organelles that deliver cytosolic proteins for degradation in the vacuole of the cell. In contrast, exocyst-positive organelles (EXPO) deliver cytosolic proteins to the cell surface and therefore represent a form of unconventional protein secretion. Because both structures have two boundary membranes, it has been suggested that they may have been falsely treated as separate entities. Using suspension culture cells and root tissue cells of transgenic Arabidopsis (Arabidopsis thaliana) plants expressing either the EXPO marker Arabidopsis Exo70E2-GFP or the autophagosome marker yellow fluorescent protein (YFP)-autophagy-related gene 8e/f (ATG8e/f), and using specific antibodies against Exo70E2 and ATG8, we have now established that, in normally growing cells, EXPO and autophagosomes are distinct from one another. However, when cells/roots are subjected to autophagy induction, EXPO as well as autophagosomes fuse with the vacuole. In the presence of concanamycin A, the punctate fluorescent signals from both organelles inside the vacuole remain visible for hours and overlap to a significant degree. Tonoplast staining with FM4-64/YFP-Rab7-like GTPase/YFP-vesicle-associated membrane protein711 confirmed the internalization of tonoplast membrane concomitant with the sequestration of EXPO and autophagosomes. This suggests that EXPO and autophagosomes may be related to one another; however, whereas induction of autophagy led to an increase in the amount of ATG8 recruited to membranes, Exo70E2 did not respond in a similar manner. PMID:26358417

  10. Prevalence of E/A wave fusion and A wave truncation in DDD pacemaker patients with complete AV block under nominal AV intervals.

    Directory of Open Access Journals (Sweden)

    Wolfram C Poller

    Full Text Available Optimization of the AV-interval (AVI in DDD pacemakers improves cardiac hemodynamics and reduces pacemaker syndromes. Manual optimization is typically not performed in clinical routine. In the present study we analyze the prevalence of E/A wave fusion and A wave truncation under resting conditions in 160 patients with complete AV block (AVB under the pre-programmed AVI. We manually optimized sub-optimal AVI.We analyzed 160 pacemaker patients with complete AVB, both in sinus rhythm (AV-sense; n = 129 and under atrial pacing (AV-pace; n = 31. Using Doppler analyses of the transmitral inflow we classified the nominal AVI as: a normal, b too long (E/A wave fusion or c too short (A wave truncation. In patients with a sub-optimal AVI, we performed manual optimization according to the recommendations of the American Society of Echocardiography.All AVB patients with atrial pacing exhibited a normal transmitral inflow under the nominal AV-pace intervals (100%. In contrast, 25 AVB patients in sinus rhythm showed E/A wave fusion under the pre-programmed AV-sense intervals (19.4%; 95% confidence interval (CI: 12.6-26.2%. A wave truncations were not observed in any patient. All patients with a complete E/A wave fusion achieved a normal transmitral inflow after AV-sense interval reduction (mean optimized AVI: 79.4 ± 13.6 ms.Given the rate of 19.4% (CI 12.6-26.2% of patients with a too long nominal AV-sense interval, automatic algorithms may prove useful in improving cardiac hemodynamics, especially in the subgroup of atrially triggered pacemaker patients with AV node diseases.

  11. Mutation of the dengue virus type 2 envelope protein heparan sulfate binding sites or the domain III lateral ridge blocks replication in Vero cells prior to membrane fusion

    International Nuclear Information System (INIS)

    Using an infectious cDNA clone we engineered seven mutations in the putative heparan sulfate- and receptor-binding motifs of the envelope protein of dengue virus serotype 2, strain 16681. Four mutant viruses, KK122/123EE, E202K, G304K, and KKK305/307/310EEE, were recovered following transfection of C6/36 cells. A fifth mutant, KK291/295EE, was recovered from C6/36 cells with a compensatory E295V mutation. All mutants grew in and mediated fusion of virus-infected C6/36 cells, but three of the mutants, KK122/123EE, E202K, G304K, did not grow in Vero cells without further modification. Two Vero cell lethal mutants, KK291/295EV and KKK307/307/310EEE, failed to replicate in DC-SIGN-transformed Raji cells and did not react with monoclonal antibodies known to block DENV attachment to Vero cells. Additionally, both mutants were unable to initiate negative-strand vRNA synthesis in Vero cells by 72 h post-infection, suggesting that the replication block occurred prior to virus-mediated membrane fusion. - Highlights: • Heparan sulfate- and receptor-binding motifs of DENV2 envelope protein were mutated. • Four mutant viruses were isolated—all could fuse C6/36 cells. • Two of these mutants were lethal in Vero cells without further modification. • Lethal mutations were KK291/295EV and KKK305/307/310EEE. • Cell attachment was implicated as the replication block for both mutants

  12. Mutation of the dengue virus type 2 envelope protein heparan sulfate binding sites or the domain III lateral ridge blocks replication in Vero cells prior to membrane fusion

    Energy Technology Data Exchange (ETDEWEB)

    Roehrig, John T., E-mail: jtr1@cdc.gov [Division of Vector-Borne Diseases, Centers for Disease Control and Prevention, Fort Collins, CO 80521 (United States); Butrapet, Siritorn; Liss, Nathan M. [Division of Vector-Borne Diseases, Centers for Disease Control and Prevention, Fort Collins, CO 80521 (United States); Bennett, Susan L. [Arthropod-borne and Infectious Diseases Laboratory, Department of Microbiology, Immunology, and Pathology, Colorado State University, Fort Collins, CO 80523 (United States); Luy, Betty E.; Childers, Thomas; Boroughs, Karen L.; Stovall, Janae L.; Calvert, Amanda E. [Division of Vector-Borne Diseases, Centers for Disease Control and Prevention, Fort Collins, CO 80521 (United States); Blair, Carol D. [Arthropod-borne and Infectious Diseases Laboratory, Department of Microbiology, Immunology, and Pathology, Colorado State University, Fort Collins, CO 80523 (United States); Huang, Claire Y.-H. [Division of Vector-Borne Diseases, Centers for Disease Control and Prevention, Fort Collins, CO 80521 (United States)

    2013-07-05

    Using an infectious cDNA clone we engineered seven mutations in the putative heparan sulfate- and receptor-binding motifs of the envelope protein of dengue virus serotype 2, strain 16681. Four mutant viruses, KK122/123EE, E202K, G304K, and KKK305/307/310EEE, were recovered following transfection of C6/36 cells. A fifth mutant, KK291/295EE, was recovered from C6/36 cells with a compensatory E295V mutation. All mutants grew in and mediated fusion of virus-infected C6/36 cells, but three of the mutants, KK122/123EE, E202K, G304K, did not grow in Vero cells without further modification. Two Vero cell lethal mutants, KK291/295EV and KKK307/307/310EEE, failed to replicate in DC-SIGN-transformed Raji cells and did not react with monoclonal antibodies known to block DENV attachment to Vero cells. Additionally, both mutants were unable to initiate negative-strand vRNA synthesis in Vero cells by 72 h post-infection, suggesting that the replication block occurred prior to virus-mediated membrane fusion. - Highlights: • Heparan sulfate- and receptor-binding motifs of DENV2 envelope protein were mutated. • Four mutant viruses were isolated—all could fuse C6/36 cells. • Two of these mutants were lethal in Vero cells without further modification. • Lethal mutations were KK291/295EV and KKK305/307/310EEE. • Cell attachment was implicated as the replication block for both mutants.

  13. Vacuolin-1 potently and reversibly inhibits autophagosome-lysosome fusion by activating RAB5A

    OpenAIRE

    Lu, Yingying; Dong, Shichen; Hao, Baixia; Li, Chang; Zhu, Kaiyuan; Guo, Wenjing; Wang, Qian; Cheung, King-Ho; Wong, Connie WM; Wu, Wu-Tian; Markus, Huss; Yue, Jianbo

    2014-01-01

    Autophagy is a catabolic lysosomal degradation process essential for cellular homeostasis and cell survival. Dysfunctional autophagy has been associated with a wide range of human diseases, e.g., cancer and neurodegenerative diseases. A large number of small molecules that modulate autophagy have been widely used to dissect this process and some of them, e.g., chloroquine (CQ), might be ultimately applied to treat a variety of autophagy-associated human diseases. Here we found that vacuolin-1...

  14. Human Matching Based on Block Fusion Features for Blind Areas%基于分块特征组合的视域盲区行人匹配

    Institute of Scientific and Technical Information of China (English)

    吴盈; 陈恳; 吉培培

    2015-01-01

    The non⁃overlapping regions of different monitoring cameras,calledblind area of the camera,pose challenges to matching the humansamong the cameras.This paper presents a method of human matching based on block features fusionfor blind areas of multiple cameras.First the discriminative training component model trained by HOG features is used to detect humans within the field of view of a single camera,then COLOR,SIFT andLBP square block features are extracted from the Hue component of the detected target to find the best fusion features through experiments for matching the humans. Experiments show the proposed matching method with the best fusion features has higher speed than the method in the literature.%各相机间通常存在监控视域以外的非重叠区域,即相机视域盲区,它的存在对多相机多行人匹配带来了挑战性工作。提出了一种基于分块特征组合的多摄像机视域盲区行人匹配的方法。在单摄像机视域中首先通过 HOG特征训练而成的判别训练部件模型对行人进行检测,在其Hue分量上分别提取COLOR、SIFT 和 LBP 分块特征,从而通过实验找出最佳组合特征实现行人的匹配。提出的最佳组合特征和已有文献中的匹配方法进行比较,结果表明匹配速率有很大的提高。

  15. Exit from the Golgi is required for the expansion of the autophagosomal phagophore in yeast Saccharomyces cerevisiae

    NARCIS (Netherlands)

    van der Vaart, Aniek; Griffith, Janice; Reggiori, Fulvio

    2010-01-01

    The delivery of proteins and organelles to the vacuole by autophagy involves membrane rearrangements that result in the formation of large vesicles called autophagosomes. The mechanism underlying autophagosome biogenesis and the origin of the membranes composing these vesicles remains largely unclea

  16. Atg11 directs autophagosome cargoes to the PAS along actin cables

    NARCIS (Netherlands)

    Monastyrska, Iryna; Shintani, Takahiro; Klionsky, Daniel J; Reggiori, Fulvio

    2006-01-01

    For more than 40 years, autophagy has been almost exclusively studied as a cellular response that allows adaptation to starvation situations. In nutrient-deprived conditions, cytoplasmic components and organelles are randomly sequestered into double-membrane vesicles called autophagosomes, creating

  17. Heat-precipitation allows the efficient purification of a functional plant-derived malaria transmission-blocking vaccine candidate fusion protein.

    Science.gov (United States)

    Beiss, Veronique; Spiegel, Holger; Boes, Alexander; Kapelski, Stephanie; Scheuermayer, Matthias; Edgue, Gueven; Sack, Markus; Fendel, Rolf; Reimann, Andreas; Schillberg, Stefan; Pradel, Gabriele; Fischer, Rainer

    2015-07-01

    Malaria is a vector-borne disease affecting more than two million people and accounting for more than 600,000 deaths each year, especially in developing countries. The most serious form of malaria is caused by Plasmodium falciparum. The complex life cycle of this parasite, involving pre-erythrocytic, asexual and sexual stages, makes vaccine development cumbersome but also offers a broad spectrum of vaccine candidates targeting exactly those stages. Vaccines targeting the sexual stage of P. falciparum are called transmission-blocking vaccines (TBVs). They do not confer protection for the vaccinated individual but aim to reduce or prevent the transmission of the parasite within a population and are therefore regarded as an essential tool in the fight against the disease. Malaria predominantly affects large populations in developing countries, so TBVs need to be produced in large quantities at low cost. Combining the advantages of eukaryotic expression with a virtually unlimited upscaling potential and a good product safety profile, plant-based expression systems represent a suitable alternative for the production of TBVs. We report here the high level (300 μg/g fresh leaf weight (FLW)) transient expression in Nicotiana benthamiana leaves of an effective TBV candidate based on a fusion protein F0 comprising Pfs25 and the C0-domain of Pfs230, and the implementation of a simple and cost-effective heat treatment step for purification that yields intact recombinant protein at >90% purity with a recovery rate of >70%. The immunization of mice clearly showed that antibodies raised against plant-derived F0 completely blocked the formation of oocysts in a malaria transmission-blocking assay (TBA) making F0 an interesting TBV candidate or a component of a multi-stage malaria vaccine cocktail.

  18. AR-12 Inhibits Multiple Chaperones Concomitant With Stimulating Autophagosome Formation Collectively Preventing Virus Replication.

    Science.gov (United States)

    Booth, Laurence; Roberts, Jane L; Ecroyd, Heath; Tritsch, Sarah R; Bavari, Sina; Reid, St Patrick; Proniuk, Stefan; Zukiwski, Alexander; Jacob, Abraham; Sepúlveda, Claudia S; Giovannoni, Federico; García, Cybele C; Damonte, Elsa; González-Gallego, Javier; Tuñón, María J; Dent, Paul

    2016-10-01

    We have recently demonstrated that AR-12 (OSU-03012) reduces the function and ATPase activities of multiple HSP90 and HSP70 family chaperones. Combined knock down of chaperones or AR-12 treatment acted to reduce the expression of virus receptors and essential glucosidase proteins. Combined knock down of chaperones or AR-12 treatment inactivated mTOR and elevated ATG13 S318 phosphorylation concomitant with inducing an endoplasmic reticulum stress response that in an eIF2α-dependent fashion increased Beclin1 and LC3 expression and autophagosome formation. Over-expression of chaperones prevented the reduction in receptor/glucosidase expression, mTOR inactivation, the ER stress response, and autophagosome formation. AR-12 reduced the reproduction of viruses including Mumps, Influenza, Measles, Junín, Rubella, HIV (wild type and protease resistant), and Ebola, an effect replicated by knock down of multiple chaperone proteins. AR-12-stimulated the co-localization of Influenza, EBV and HIV virus proteins with LC3 in autophagosomes and reduced viral protein association with the chaperones HSP90, HSP70, and GRP78. Knock down of Beclin1 suppressed drug-induced autophagosome formation and reduced the anti-viral protection afforded by AR-12. In an animal model of hemorrhagic fever virus, a transient exposure of animals to low doses of AR-12 doubled animal survival from ∼30% to ∼60% and suppressed liver damage as measured by ATL, GGT and LDH release. Thus through inhibition of chaperone protein functions; reducing the production, stability and processing of viral proteins; and stimulating autophagosome formation/viral protein degradation, AR-12 acts as a broad-specificity anti-viral drug in vitro and in vivo. We argue future patient studies with AR-12 are warranted. J. Cell. Physiol. 231: 2286-2302, 2016. © 2016 Wiley Periodicals, Inc. PMID:27187154

  19. Electron microscopic visualization of autophagosomes induced by infection of human papillomavirus pseudovirions

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, Yoshiyuki, E-mail: yishii@nih.go.jp

    2013-04-19

    Highlights: •HPV16 pseudovirions (16PsVs) infection induces an autophagy response. •The autophagy was analyzed by transmission electron microscope (TEM). •TEM showed the double-membrane vesicles in HeLa cells inoculated with 16PsVs. •These vesicles incorporated 16PsVs particles in the lumen. •These results imply that autophagosomes are generated from the plasma membrane. -- Abstract: Autophagy is a bulk degradation process for subcellular proteins and organelles to manage cell starvation. Autophagy is associated with the formation of autophagosomes and further functions as a defense mechanism against infection by various pathogens. Human papillomavirus (HPV) infection induces an autophagy response, such as up-regulation of marker proteins for autophagy, in host keratinocytes. However, direct microscopic evidence for autophagy induction by HPV infection is still lacking. Here, I report an electron microscopic analysis of autophagosomes elicited by the entry of HPV pseudovirions (PsVs). HeLa cells showed enhanced infectivity for PsVs of HPV type 16 (16PsVs) when treated with an autophagy inhibitor, suggesting the involvement of autophagy in HPV infection. In HeLa cells inoculated with 16PsVs, transmission electron microscopy showed the presence of cup-shaped, double-membrane vesicles (phagophores) and double-membrane-bound vesicles, which are typical structures of autophagosomes. These double-membrane vesicles displayed a large lumen volume and incorporated 10–50 16PsVs particles in the lumen. These results demonstrate that autophagy is indeed induced during the HPV16 entry process and imply that autophagosomes are generated from the plasma membrane by HPV infection.

  20. Fusion of aerial images with mean shift-based upsampled elevation data for improved building block classification

    Science.gov (United States)

    Gyftakis, S.; Tsenoglou, T.; Bratsolis, E.; Charou, Eleni; Vassilas, N.

    2014-10-01

    Nowadays there is an increasing demand for detailed 3D modeling of buildings using elevation data such as those acquired from LiDAR airborne scanners. The various techniques that have been developed for this purpose typically perform segmentation into homogeneous regions followed by boundary extraction and are based on some combination of LiDAR data, digital maps, satellite images and aerial orthophotographs. In the present work, our dataset includes an aerial RGB orthophoto, a DSM and a DTM with spatial resolutions of 20cm, 1m and 2m respectively. Next, a normalized DSM (nDSM) is generated and fused with the optical data in order to increase its resolution to 20cm. The proposed methodology can be described as a two-step approach. First, a nearest neighbor interpolation is applied on the low resolution nDSM to obtain a low quality, ragged, elevation image. Next, we performed a mean shift-based discontinuity preserving smoothing on the fused data. The outcome is on the one hand a more homogeneous RGB image, with smoothed terrace coloring while at the same time preserving the optical edges and on the other hand an upsampled elevation data with considerable improvement regarding region filling and "straightness" of elevation discontinuities. Besides the apparent visual assessment of the increased accuracy of building boundaries, the effectiveness of the proposed method is demonstrated using the processed dataset as input to five supervised classification methods. The performance of each method is evaluated using a subset of the test area as ground truth. Comparisons with classification results obtained with the original data demonstrate that preprocessing the input dataset using the mean shift algorithm improves significantly the performance of all tested classifiers for building block extraction.

  1. Cytoprotective effect of imatinib mesylate in non-BCR-ABL-expressing cells along with autophagosome formation

    Energy Technology Data Exchange (ETDEWEB)

    Ohtomo, Tadashi [Department of Biochemistry, Tokyo Medical University, Tokyo (Japan); Miyazawa, Keisuke, E-mail: miyazawa@tokyo-med.ac.jp [Department of Biochemistry, Tokyo Medical University, Tokyo (Japan); Naito, Munekazu [Department of Anatomy, Tokyo Medical University, Tokyo (Japan); Moriya, Shota [Department of Biochemistry, Tokyo Medical University, Tokyo (Japan); Kuroda, Masahiko [Department of Molecular Pathology, Tokyo Medical University, Tokyo (Japan); Itoh, Masahiro [Department of Anatomy, Tokyo Medical University, Tokyo (Japan); Tomoda, Akio [Department of Biochemistry, Tokyo Medical University, Tokyo (Japan)

    2010-01-01

    Treatment with imatinib mesylate (IM) results in an increased viable cell number of non-BCR-ABL-expressing cell lines by inhibiting spontaneous apoptosis. Electron microscopy revealed an increase of autophagosomes in response to IM. IM attenuated the cytotoxic effect of cytosine arabinoside, as well as inhibiting cell death with serum-deprived culture. Cytoprotection with autophagosome formation by IM was observed in various leukemia and cancer cell lines as well as normal murine embryonic fibroblasts (MEFs). Complete inhibition of autophagy by knockdown of atg5 in the Tet-off atg5{sup -/-} MEF system attenuated the cytoprotective effect of IM, indicating that the effect is partially dependent on autophagy. However, cytoprotection by IM was not mediated through suppression of ROS production via mitophagy, ER stress via ribophagy, or proapoptotic function of ABL kinase. Although the target tyrosine kinase(s) of IM remains unclear, our data provide novel therapeutic possibilities of using IM for cytoprotection.

  2. The HOPS complex mediates autophagosome–lysosome fusion through interaction with syntaxin 17

    OpenAIRE

    Jiang, Peidu; Nishimura, Taki; Sakamaki, Yuriko; Itakura, Eisuke; Hatta, Tomohisa; Natsume, Tohru; Mizushima, Noboru

    2014-01-01

    Membrane fusion is generally controlled by Rabs, soluble N-ethylmaleimide–sensitive factor attachment protein receptors (SNAREs), and tethering complexes. Syntaxin 17 (STX17) was recently identified as the autophagosomal SNARE required for autophagosome–lysosome fusion in mammals and Drosophila. In this study, to better understand the mechanism of autophagosome–lysosome fusion, we searched for STX17-interacting proteins. Immunoprecipitation and mass spectrometry analysis identified vacuolar p...

  3. Nanoparticle tumor localization, disruption of autophagosomal trafficking, and prolonged drug delivery improve survival in peritoneal mesothelioma.

    Science.gov (United States)

    Liu, Rong; Colby, Aaron H; Gilmore, Denis; Schulz, Morgan; Zeng, Jialiu; Padera, Robert F; Shirihai, Orian; Grinstaff, Mark W; Colson, Yolonda L

    2016-09-01

    The treatment outcomes for malignant peritoneal mesothelioma are poor and associated with high co-morbidities due to suboptimal drug delivery. Thus, there is an unmet need for new approaches that concentrate drug at the tumor for a prolonged period of time yielding enhanced antitumor efficacy and improved metrics of treatment success. A paclitaxel-loaded pH-responsive expansile nanoparticle (PTX-eNP) system is described that addresses two unique challenges to improve the outcomes for peritoneal mesothelioma. First, following intraperitoneal administration, eNPs rapidly and specifically localize to tumors. The rate of eNP uptake by tumors is an order of magnitude faster than the rate of uptake in non-malignant cells; and, subsequent accumulation in autophagosomes and disruption of autophagosomal trafficking leads to prolonged intracellular retention of eNPs. The net effect of these combined mechanisms manifests as rapid localization to intraperitoneal tumors within 4 h of injection and persistent intratumoral retention for >14 days. Second, the high tumor-specificity of PTX-eNPs leads to delivery of greater than 100 times higher concentrations of drug in tumors compared to PTX alone and this is maintained for at least seven days following administration. As a result, overall survival of animals with established mesothelioma more than doubled when animals were treated with multiple doses of PTX-eNPs compared to equivalent dosing with PTX or non-responsive PTX-loaded nanoparticles. PMID:27343465

  4. Activation of lysosomal function in the course of autophagy via mTORC1 suppression and autophagosome-lysosome fusion

    OpenAIRE

    ZHOU, JING; Tan, Shi-Hao; Nicolas, Valérie; Bauvy, Chantal; Yang, Nai-Di; Zhang, Jianbin; Xue,Yuan; Codogno, Patrice; Shen, Han-Ming

    2013-01-01

    Lysosome is a key subcellular organelle in the execution of the autophagic process and at present little is known whether lysosomal function is controlled in the process of autophagy. In this study, we first found that suppression of mammalian target of rapamycin (mTOR) activity by starvation or two mTOR catalytic inhibitors (PP242 and Torin1), but not by an allosteric inhibitor (rapamycin), leads to activation of lysosomal function. Second, we provided evidence that activation of lysosomal f...

  5. 一种DE搜索块寻优的多聚焦图像融合算法%Algorithm for Multi- focus Image Fusion Using a DE Search-block Optimization

    Institute of Scientific and Technical Information of China (English)

    马文娟; 姬天富

    2012-01-01

    For multi - focus image, a DE (Differential Evolution) search strategy is used in algorithm of sub - block op-timization of the image fusion to discuss in-depth the clarity recovery of the source image with strict registration of the same scene. The fusion process is to divide the registered source image into several sub - blocks and then use the clarity evaluation function to select a clear image to form a fused image. The innovation of this method is that the size of the im- age block is used as a genetic chromosome after the crossover, mutation and selection operations to obtain the optimal so-lution in a global sense. The experimental comparison results show that this method is superior to the genetic algorithm and other conventional multi - focus image fusion method.%针对多聚焦图像,提出了一种DE(差异演化)搜索策略应用于图像融合子块寻优的算法,对同一场景两幅严格配准的源图像的清晰度恢复进行了深入研究。融合过程是首先将已经配准的源图像分割成若干个子块,然后采用一个清晰度评价函数选取清晰的图像块形成融合图像。该方法的创新之处在于,把图像子块的大小作为遗传染色体,经过交叉、变异和选择等操作,以便得到全局意义上的最优解。实验对比结果表明,该方法超过遗传算法和其它传统的多聚焦图像融合法。

  6. Gabor多方向特征融合与分块统计的表情识别%Expression recognition based on Gabor multi-orientation features fusion and block statistics

    Institute of Scientific and Technical Information of China (English)

    刘娟; 胡敏; 黄忠

    2015-01-01

    为了克服传统Gabor特征存在提取时间长和数据维数过高的不足,提出一种Gabor多方向特征融合与分块统计的表情特征提取方法. 为了提取局部方向信息并降低特征维数,首先对预处理的人脸表情图像进行Gabor变换并提取多尺度多方向的表情特征;然后借鉴局部二值模式( local binary pattern, LBP)的思想将相同尺度、不同方向的特征进行融合,并对融合图进行分块,统计每块融合图的均值和标准差,以此构建块特征矢量( block feature vector, BFV) ,再将其联合起来形成整幅图像的表情特征矢量( expression feature vector, EFV);最后利用支持向量机( support vector machine, SVM)对提取的EFV进行分类. 该算法在JAFFE 和Cohn-Kanade(CK)库上进行实验,分别取得了95.67%、96.17%的平均识别率以及1 213 ms和4 565 ms的平均特征提取时间. 实验结果表明所提方法能较快、较准确地进行人脸表情识别.%To overcome the shortcomings of the traditional Gabor feature vectors, which need a lot of time to extract and whose dimension is very high, a method based on Gabor multi-orientation features fusion and block statistics is proposed.To extract the local orientation information and reduce the dimension of the features, firstly the Gabor features of multi-scale and multi-orientation were extracted after pretreatment.Then the fusion rule from local bina-ry pattern ( LBP) was proposed to fuse the Gabor features of the same scale and multi-orientation, and fusion dia-grams were separated into several blocks.The block feature vector ( BFV) was obtained through statistical tech-niques, including mean and standard deviation inside each block.The expression feature vector ( EFV) of the whole image was constructed by conjugating the BFVs.Finally, facial expression classification was achieved by support vector machine (SVM).Experiments of the proposed method are performed on JAFEE and Cohn-Kanade (CK), it achieves an

  7. Evidence for the involvement of lipid rafts localized at the ER-mitochondria associated membranes in autophagosome formation.

    Science.gov (United States)

    Garofalo, Tina; Matarrese, Paola; Manganelli, Valeria; Marconi, Matteo; Tinari, Antonella; Gambardella, Lucrezia; Faggioni, Alberto; Misasi, Roberta; Sorice, Maurizio; Malorni, Walter

    2016-06-01

    Mitochondria-associated membranes (MAMs) are subdomains of the endoplasmic reticulum (ER) that interact with mitochondria. This membrane scrambling between ER and mitochondria appears to play a critical role in the earliest steps of autophagy. Recently, lipid microdomains, i.e. lipid rafts, have been identified as further actors of the autophagic process. In the present work, a series of biochemical and molecular analyses has been carried out in human fibroblasts with the specific aim of characterizing lipid rafts in MAMs and to decipher their possible implication in the autophagosome formation. In fact, the presence of lipid microdomains in MAMs has been detected and, in these structures, a molecular interaction of the ganglioside GD3, a paradigmatic "brick" of lipid rafts, with core-initiator proteins of autophagy, such as AMBRA1 and WIPI1, was revealed. This association seems thus to take place in the early phases of autophagic process in which MAMs have been hypothesized to play a key role. The functional activity of GD3 was suggested by the experiments carried out by knocking down ST8SIA1 gene expression, i.e., the synthase that leads to the ganglioside formation. This experimental condition results in fact in the impairment of the ER-mitochondria crosstalk and the subsequent hindering of autophagosome nucleation. We thus hypothesize that MAM raft-like microdomains could be pivotal in the initial organelle scrambling activity that finally leads to the formation of autophagosome.

  8. Rabies Virus-Induced Membrane Fusion Pathway

    OpenAIRE

    Gaudin, Yves

    2000-01-01

    Fusion of rabies virus with membranes is triggered at low pH and is mediated by the viral glycoprotein (G). The rabies virus-induced fusion pathway was studied by investigating the effects of exogenous lipids having various dynamic molecular shapes on the fusion process. Inverted cone-shaped lysophosphatidylcholines (LPCs) blocked fusion at a stage subsequent to fusion peptide insertion into the target membrane. Consistent with the stalk-hypothesis, LPC with shorter alkyl chains inhibited fus...

  9. Obatoclax (GX15-070) triggers necroptosis by promoting the assembly of the necrosome on autophagosomal membranes

    OpenAIRE

    Basit, F; Cristofanon, S; Fulda, S.

    2013-01-01

    Obatoclax (GX15-070), a small-molecule inhibitor of antiapoptotic Bcl-2 proteins, has been reported to trigger cell death via autophagy. However, the underlying molecular mechanisms have remained elusive. Here, we identify GX15-070-stimulated assembly of the necrosome on autophagosomal membranes as a key event that connects GX15-070-stimulated autophagy to necroptosis. GX15-070 predominately induces a non-apoptotic form of cell death in rhabdomyosarcoma cells, as evident by lack of typical ap...

  10. EMP Fusion

    OpenAIRE

    KUNTAY, Isık

    2010-01-01

    This paper introduces a novel fusion scheme, called EMP Fusion, which has the promise of achieving breakeven and realizing commercial fusion power. The method is based on harnessing the power of an electromagnetic pulse generated by the now well-developed flux compression technology. The electromagnetic pulse acts as a means of both heating up the plasma and confining the plasma, eliminating intermediate steps. The EMP Fusion device is simpler compared to other fusion devices and this reduces...

  11. Heart Block

    Science.gov (United States)

    ... the signal causes the heart to contract and pump blood. Heart block occurs if the electrical signal is ... degree heart block limits the heart's ability to pump blood to the rest of the body. This type ...

  12. Population Blocks.

    Science.gov (United States)

    Smith, Martin H.

    1992-01-01

    Describes an educational game called "Population Blocks" that is designed to illustrate the concept of exponential growth of the human population and some potential effects of overpopulation. The game material consists of wooden blocks; 18 blocks are painted green (representing land), 7 are painted blue (representing water); and the remaining…

  13. Fusion rings and fusion ideals

    DEFF Research Database (Denmark)

    Andersen, Troels Bak

    This dissertation investigates fusion rings, which are Grothendieck groups of rigid, monoidal, semisimple, abelian categories. Special interest is in rational fusion rings, i.e., fusion rings which admit a finite basis, for as commutative rings they may be presented as quotients of polynomial rings...... by the so-called fusion ideals. The fusion rings of Wess-Zumino-Witten models have been widely studied and are well understood in terms of precise combinatorial descriptions and explicit generating sets of the fusion ideals. They also appear in another, more general, setting via tilting modules for quantum...

  14. Fiber type conversion by PGC-1α activates lysosomal and autophagosomal biogenesis in both unaffected and Pompe skeletal muscle.

    Directory of Open Access Journals (Sweden)

    Shoichi Takikita

    Full Text Available PGC-1α is a transcriptional co-activator that plays a central role in the regulation of energy metabolism. Our interest in this protein was driven by its ability to promote muscle remodeling. Conversion from fast glycolytic to slow oxidative fibers seemed a promising therapeutic approach in Pompe disease, a severe myopathy caused by deficiency of the lysosomal enzyme acid alpha-glucosidase (GAA which is responsible for the degradation of glycogen. The recently approved enzyme replacement therapy (ERT has only a partial effect in skeletal muscle. In our Pompe mouse model (KO, the poor muscle response is seen in fast but not in slow muscle and is associated with massive accumulation of autophagic debris and ineffective autophagy. In an attempt to turn the therapy-resistant fibers into fibers amenable to therapy, we made transgenic KO mice expressing PGC-1α in muscle (tgKO. The successful switch from fast to slow fibers prevented the formation of autophagic buildup in the converted fibers, but PGC-1α failed to improve the clearance of glycogen by ERT. This outcome is likely explained by an unexpected dramatic increase in muscle glycogen load to levels much closer to those observed in patients, in particular infants, with the disease. We have also found a remarkable rise in the number of lysosomes and autophagosomes in the tgKO compared to the KO. These data point to the role of PGC-1α in muscle glucose metabolism and its possible role as a master regulator for organelle biogenesis - not only for mitochondria but also for lysosomes and autophagosomes. These findings may have implications for therapy of lysosomal diseases and other disorders with altered autophagy.

  15. Membrane fusion

    DEFF Research Database (Denmark)

    Bendix, Pól Martin

    2015-01-01

    At Stanford University, Boxer lab, I worked on membrane fusion of small unilamellar lipid vesicles to flat membranes tethered to glass surfaces. This geometry closely resembles biological systems in which liposomes fuse to plasma membranes. The fusion mechanism was studied using DNA zippering...... between complementary strands linked to the two apposing membranes closely mimicking the zippering mechanism of SNARE fusion complexes....

  16. 基于Gabor多方向特征融合与分块直方图的人脸表情识别方法%Facial Expression Recognition Method Based on Gabor Multi-orientation Features Fusion and Block Histogram

    Institute of Scientific and Technical Information of China (English)

    刘帅师; 田彦涛; 万川

    2011-01-01

    In this paper, the Gabor multi-orientation fused features are combined with block histogram to extract facial expressional features in order to overcome the disadvantage of traditional Gabor filter bank, whose high-dimensional Gabor features are redundant and the global features representation capacity is poor. First, to extract the multi-orientation information and reduce the dimension of the features, two fusion rules are proposed to fuse the original Gabor features of the same scale into a single feature. Second, to represent the global features effectively, the fused image is divided into several nonoverlapping rectangular units, and the histogram of each unit is computed and combined as facial expression features. Experimental results show that the method is effective for both dimension reduction and recognition performance. The novelty of the method is to use two fusion rules to fuse multi-orientation Gabor features. The best average recognition rate of 98.24 % is achieved in JAFFE database, which indicates this method is suitable for facial expression analysis.%针对传统的Gabor特征表征全局特征能力弱以及特征数据存在冗余性的缺点,提出一种新颖的采用Gabor多方向特征融合与分块直方图统计相结合的方法来提取表情特征.为了提取局部方向信息并降低特征维数,首先采用Gabor滤波器提取人脸表情图像的多尺度和多方向特征,然后按照两个融合规则将相同尺度不同方向的特征融合到一起.为了能够有效地表征图像全局特征,将融合图像进一步划分为若干矩形不重叠且大小相等的子块,分别计算每个子块区域内融合特征的直方图分布,将其联合起来实现图像表征.实验结果表明,这种方法无论在计算量上还是识别性能上都比传统的Gabor滤波器组更具有优势.该方法的创新处在于提出了两个Gabor多方向特征融合规则,应用在JAFFE表情库上最高平均识别率达到98.24%,

  17. Inhibitory effect of mTOR activator MHY1485 on autophagy: suppression of lysosomal fusion.

    Directory of Open Access Journals (Sweden)

    Yeon Ja Choi

    Full Text Available Autophagy is a major degradative process responsible for the disposal of cytoplasmic proteins and dysfunctional organelles via the lysosomal pathway. During the autophagic process, cells form double-membraned vesicles called autophagosomes that sequester disposable materials in the cytoplasm and finally fuse with lysosomes. In the present study, we investigated the inhibition of autophagy by a synthesized compound, MHY1485, in a culture system by using Ac2F rat hepatocytes. Autophagic flux was measured to evaluate the autophagic activity. Autophagosomes were visualized in Ac2F cells transfected with AdGFP-LC3 by live-cell confocal microscopy. In addition, activity of mTOR, a major regulatory protein of autophagy, was assessed by western blot and docking simulation using AutoDock 4.2. In the result, treatment with MHY1485 suppressed the basal autophagic flux, and this inhibitory effect was clearly confirmed in cells under starvation, a strong physiological inducer of autophagy. The levels of p62 and beclin-1 did not show significant change after treatment with MHY1485. Decreased co-localization of autophagosomes and lysosomes in confocal microscopic images revealed the inhibitory effect of MHY1485 on lysosomal fusion during starvation-induced autophagy. These effects of MHY1485 led to the accumulation of LC3II and enlargement of the autophagosomes in a dose- and time-dependent manner. Furthermore, MHY1485 induced mTOR activation and correspondingly showed a higher docking score than PP242, a well-known ATP-competitive mTOR inhibitor, in docking simulation. In conclusion, MHY1485 has an inhibitory effect on the autophagic process by inhibition of fusion between autophagosomes and lysosomes leading to the accumulation of LC3II protein and enlarged autophagosomes. MHY1485 also induces mTOR activity, providing a possibility for another regulatory mechanism of autophagy by the MHY compound. The significance of this study is the finding of a novel

  18. Fusion breeder

    International Nuclear Information System (INIS)

    The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the US fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the US fusion program and the US nuclear energy program. The purpose of this paper is to suggest this policy change be made and tell why it should be made, and to outline specific research and development goals so that the fusion breeder will be developed in time to meet fissile fuel needs

  19. Zitongxi Block

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    @@ Zitongxi Block (Western Zitong Block), is located in Zitong County, northwest of Sichuan Province (as shown on Fig. 8 ). Geologically. it is situated in the Zitong Depression, southwest of the middle Longmenshan faulted and folded belt, covering an area of 1 830 km2. Transportation is very convenient. A crisscross network of highways run through the block and the Baocheng railway is nearby. The climate is moderate. Most area belongs to hilly land with the elevation of 500-600 m.The Tongjiang River runs across the area.

  20. Image fusion

    Science.gov (United States)

    Pavel, M.

    1993-01-01

    The topics covered include the following: a system overview of the basic components of a system designed to improve the ability of a pilot to fly through low-visibility conditions such as fog; the role of visual sciences; fusion issues; sensor characterization; sources of information; image processing; and image fusion.

  1. Foot-and-Mouth Disease Virus Induces Autophagosomes during Cell Entry via a Class III Phosphatidylinositol 3-Kinase-Independent Pathway

    OpenAIRE

    Berryman, Stephen; Brooks, Elizabeth; Burman, Alison; Hawes, Philippa; Roberts, Rebecca; Netherton, Christopher; Monaghan, Paul; Whelband, Matthew; Cottam, Eleanor; Elazar, Zvulun; Jackson, Terry; Wileman, Thomas

    2012-01-01

    Autophagy is an intracellular pathway that can contribute to innate antiviral immunity by delivering viruses to lysosomes for degradation or can be beneficial for viruses by providing specialized membranes for virus replication. Here, we show that the picornavirus foot-and-mouth disease virus (FMDV) induces the formation of autophagosomes. Induction was dependent on Atg5, involved processing of LC3 to LC3II, and led to a redistribution of LC3 from the cytosol to punctate vesicles indicative o...

  2. Imaging endosomes and autophagosomes in whole mammalian cells using correlative cryo-fluorescence and cryo-soft X-ray microscopy (cryo-CLXM)

    International Nuclear Information System (INIS)

    Cryo-soft X-ray tomography (cryo-SXT) is a powerful imaging technique that can extract ultrastructural information from whole, unstained mammalian cells as close to the living state as possible. Subcellular organelles including the nucleus, the Golgi apparatus and mitochondria have been identified by morphology alone, due to the similarity in contrast to transmission electron micrographs. In this study, we used cryo-SXT to image endosomes and autophagosomes, organelles that are particularly susceptible to chemical fixation artefacts during sample preparation for electron microscopy. We used two approaches to identify these compartments. For early and recycling endosomes, which are accessible to externally-loaded markers, we used an anti-transferrin receptor antibody conjugated to 10 nm gold particles. For autophagosomes, which are not accessible to externally-applied markers, we developed a correlative cryo-fluorescence and cryo-SXT workflow (cryo-CLXM) to localise GFP-LC3 and RFP-Atg9. We used a stand-alone cryo-fluorescence stage in the home laboratory to localise the cloned fluorophores, followed by cryo-soft X-ray tomography at the synchrotron to analyse cellular ultrastructure. We mapped the 3D ultrastructure of the endocytic and autophagic structures, and discovered clusters of omegasomes arising from ‘hotspots’ on the ER. Thus, immunogold markers and cryo-CLXM can be used to analyse cellular processes that are inaccessible using other imaging modalities. - Highlights: • We image whole, unstained mammalian cells using cryo-soft X-ray tomography. • Endosomes are identified using a gold marker for the transferrin receptor. • A new workflow for correlative cryo-fluorescence and cryo-SXT is used to locate early autophagosomes. • Interactions between endosomes, endoplasmic reticulum and forming autophagosomes are mapped in 3D. • Multiple omegasomes are shown to form at ‘hotspots’ on the endoplasmic reticulum

  3. Imaging endosomes and autophagosomes in whole mammalian cells using correlative cryo-fluorescence and cryo-soft X-ray microscopy (cryo-CLXM) ☆

    OpenAIRE

    Duke, Elizabeth M.H.; Razi, Minoo; Weston, Anne; Guttmann, Peter; Werner, Stephan; Henzler, Katja; Schneider, Gerd; Tooze, Sharon A; Collinson, Lucy M.

    2014-01-01

    Cryo-soft X-ray tomography (cryo-SXT) is a powerful imaging technique that can extract ultrastructural information from whole, unstained mammalian cells as close to the living state as possible. Subcellular organelles including the nucleus, the Golgi apparatus and mitochondria have been identified by morphology alone, due to the similarity in contrast to transmission electron micrographs. In this study, we used cryo-SXT to image endosomes and autophagosomes, organelles that are particularly s...

  4. Imaging endosomes and autophagosomes in whole mammalian cells using correlative cryo-fluorescence and cryo-soft X-ray microscopy (cryo-CLXM)

    Energy Technology Data Exchange (ETDEWEB)

    Duke, Elizabeth M.H. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0DE (United Kingdom); Razi, Minoo [Secretory Pathways Laboratory, London Research Institute, Cancer Research UK, London WC2A 3LY (United Kingdom); Weston, Anne [Electron Microscopy Unit, London Research Institute, Cancer Research UK, London WC2A 3LY (United Kingdom); Guttmann, Peter; Werner, Stephan; Henzler, Katja; Schneider, Gerd [Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Institute for Soft Matter and Functional Materials, 12489 Berlin (Germany); Tooze, Sharon A. [Secretory Pathways Laboratory, London Research Institute, Cancer Research UK, London WC2A 3LY (United Kingdom); Collinson, Lucy M., E-mail: lucy.collinson@cancer.org.uk [Electron Microscopy Unit, London Research Institute, Cancer Research UK, London WC2A 3LY (United Kingdom)

    2014-08-01

    Cryo-soft X-ray tomography (cryo-SXT) is a powerful imaging technique that can extract ultrastructural information from whole, unstained mammalian cells as close to the living state as possible. Subcellular organelles including the nucleus, the Golgi apparatus and mitochondria have been identified by morphology alone, due to the similarity in contrast to transmission electron micrographs. In this study, we used cryo-SXT to image endosomes and autophagosomes, organelles that are particularly susceptible to chemical fixation artefacts during sample preparation for electron microscopy. We used two approaches to identify these compartments. For early and recycling endosomes, which are accessible to externally-loaded markers, we used an anti-transferrin receptor antibody conjugated to 10 nm gold particles. For autophagosomes, which are not accessible to externally-applied markers, we developed a correlative cryo-fluorescence and cryo-SXT workflow (cryo-CLXM) to localise GFP-LC3 and RFP-Atg9. We used a stand-alone cryo-fluorescence stage in the home laboratory to localise the cloned fluorophores, followed by cryo-soft X-ray tomography at the synchrotron to analyse cellular ultrastructure. We mapped the 3D ultrastructure of the endocytic and autophagic structures, and discovered clusters of omegasomes arising from ‘hotspots’ on the ER. Thus, immunogold markers and cryo-CLXM can be used to analyse cellular processes that are inaccessible using other imaging modalities. - Highlights: • We image whole, unstained mammalian cells using cryo-soft X-ray tomography. • Endosomes are identified using a gold marker for the transferrin receptor. • A new workflow for correlative cryo-fluorescence and cryo-SXT is used to locate early autophagosomes. • Interactions between endosomes, endoplasmic reticulum and forming autophagosomes are mapped in 3D. • Multiple omegasomes are shown to form at ‘hotspots’ on the endoplasmic reticulum.

  5. Distinct Roles for Key Karyogamy Proteins during Yeast Nuclear Fusion

    OpenAIRE

    Melloy, Patricia; Shen, Shu; White, Erin; Rose, Mark D.

    2009-01-01

    During yeast mating, cell fusion is followed by the congression and fusion of the two nuclei. Proteins required for nuclear fusion are found at the surface (Prm3p) and within the lumen (Kar2p, Kar5p, and Kar8p) of the nuclear envelope (NE). Electron tomography (ET) of zygotes revealed that mutations in these proteins block nuclear fusion with different morphologies, suggesting that they act in different steps of fusion. Specifically, prm3 zygotes were blocked before formation of membrane brid...

  6. Ghost Block

    OpenAIRE

    Webb, Neil

    2011-01-01

    Filmed on the English south coast 'Ghost Block' depicts the uncanny and eerie atmosphere at the site of a WW2 coastal defence line. The concrete cubes were used as an anti-invasion blockade against potential landing forces. This protection line now slowly decaying and becoming enmeshed into the environment still acts as a defence to repel unwanted visitors. The area is a natural reserve to nesting birds that often lay eggs directly onto the beach surface. The blocks act as a final barrier ...

  7. Adaptive sensor fusion

    Science.gov (United States)

    Kadar, Ivan

    1995-07-01

    A perceptual reasoning system adaptively extracting, associating, and fusing information from multiple sources, at various levels of abstraction, is considered as the building block for the next generation of surveillance systems. A system architecture is presented which makes use of both centralized and distributed predetection fusion combined with intelligent monitor and control coupling both on-platform and off-board track and decision level fusion results. The goal of this system is to create a `gestalt fused sensor system' whose information product is greater than the sum of the information products from the individual sensors and has performance superior to either individual or a sub-group of combined sensors. The application of this architectural concept to the law enforcement arena (e.g. drug interdiction) utilizing multiple spatially and temporally diverse surveillance platforms and/or information sources, is used to illustrate the benefits of the adaptive perceptual reasoning system concept.

  8. Epidural block

    Science.gov (United States)

    ... Drugs & Supplements Videos & Tools Español You Are Here: Home ... It numbs or causes a loss of feeling in the lower half your body. This lessens the pain of contractions during childbirth. An epidural block may also be used to ...

  9. Cold fusion

    International Nuclear Information System (INIS)

    So called 'cold fusion phenomena' are not confirmed yet. Excess heat generation is very delicate one. Neutron generation is most reliable results, however, the records are erratic and the same results could not be repeated. So there is no reason to exclude the malfunction of testing instruments. The same arguments arise in recording 4He, 3He, 3H, which are not rich in quantity basically. An experiment where plenty of 4He were recorded is attached in appendix. The problem is that we are trying to search cold fusion which is permitted by nature or not. The famous tunneling effect in quantum mechanics will answer it, however, the most fusion rate is known to be negligible. The focus of this project is on the theme that how to increase that negligible fusion rate. 6 figs, 4 tabs, 1512 refs. (Author)

  10. Cold fusion

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Suk Yong; Sung, Ki Woong; Kang, Joo Sang; Lee, Jong Jik [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-02-01

    So called `cold fusion phenomena` are not confirmed yet. Excess heat generation is very delicate one. Neutron generation is most reliable results, however, the records are erratic and the same results could not be repeated. So there is no reason to exclude the malfunction of testing instruments. The same arguments arise in recording {sup 4}He, {sup 3}He, {sup 3}H, which are not rich in quantity basically. An experiment where plenty of {sup 4}He were recorded is attached in appendix. The problem is that we are trying to search cold fusion which is permitted by nature or not. The famous tunneling effect in quantum mechanics will answer it, however, the most fusion rate is known to be negligible. The focus of this project is on the theme that how to increase that negligible fusion rate. 6 figs, 4 tabs, 1512 refs. (Author).

  11. Fusion energy

    International Nuclear Information System (INIS)

    The efforts of the Chemical Technology Division in fusion energy include the areas of fuel handling, processing, and containment. Current studies are concerned largely with the development of vacuum pumps for fusion reactors and experiments and with development and evaluation of techniques for recovering tritium from solid or liquid breeding blankets. In addition, a small effort is devoted to support of the ORNL design of a major Tokamak experiment, The Next Step (TNS)

  12. Tubulin Polymerization Promoting Protein (TPPP/p25α) promotes unconventional secretion of α-synuclein through exophagy by impairing autophagosome-lysosome fusion

    DEFF Research Database (Denmark)

    Ejlerskov, Patrick; Rasmussen, Izabela Zorawska; Tolstrup Nielsen, Troels;

    2013-01-01

    Aggregation of α-synuclein can be promoted by the tubulin polymerization-promoting protein/p25α, which we have used here as a tool to study the role of autophagy in the clearance of α-synuclein. In NGF-differentiated PC12 catecholaminergic nerve cells, we show that de novo expressed p25α co...... increase in the basal level of α-synuclein secreted into the medium. Secretion was strictly dependent on autophagy and could be up-regulated (trehalose and Rab1A) or down-regulated (3-methyladenine and ATG5 shRNA) by enhancers or inhibitors of autophagy or by modulating minus-end-directed (HDAC6 sh...

  13. Huhe Block

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    @@ Huhe Block is located in the mid-west part of Inner Mogolia Autonomous Region, covering an area of 15 079km2, in the range of 109°40'-112°00'E and 39°23()-40°40'N. Topographically. the Fengzhen hill is to the east, the Yinshan Mounts is to the north, the Hetao Plain and Ordos Plateau are respectively in its west and south.The Yellow River flows across this block. The elevation is 1 000 m in the flat area and in the range of 1 000-1 300m. in the plateau area, good for the development of agriculture and industry as well as husbandry. It belongs to inland plateau climate with annually averaged temperature of 8℃, the minimum being -12℃ in winter and the maximum 22℃ in summer.

  14. Therapeutic antitumor efficacy of tumor-derived autophagosome (DRibble vaccine on head and neck cancer

    Directory of Open Access Journals (Sweden)

    Su H

    2015-03-01

    Full Text Available Hang Su,1,* Qiong Luo,2,* Hao Xie,3 Xiaofeng Huang,1 Yanhong Ni,1 Yongbin Mou,1 Qingang Hu1,4 1Center Laboratory of Stomatology, Stomatological Hospital Affiliated Medical School, 2State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, 3Institute of Life Sciences, Key Laboratory of Developmental Genes and Human Disease, Southeast University, Nanjing, People’s Republic of China; 4Leeds Dental Institute, Faculty of Medicine and Health, University of Leeds, Leeds, UK *These authors contributed equally to this work Purpose: Vaccines play important roles in antitumor biotherapy. Autophagy in tumor cells plays a critical role in depredating proteins, including tumor-specific antigens and tumor-associated antigens. We aimed to induce and collect tumor-derived autophagosomes (DRibbles from tumor cells as a novel antitumor vaccine by inhibiting the functions of proteasomes and lysosomes.Materials and methods: DRibbles were prepared and their morphological and autophagic properties characterized. Dendritic cells (DCs generated from the bone marrow monocytes of mice were cocultured with DRibbles, then surface molecules of DCs and B cells, as well as apoptosis of DCs, were determined by flow cytometry. Meanwhile, functional properties of the DRibble-DCs were examined by mixed lymphocyte reactions and animal experiments.Results: The diameter of autophagic nanoparticles with spherical and double-membrane structure was between 200 nm and 500 nm. DRibbles resulted in the upregulation of costimulatory molecules CD40 and CD86 as well as major histocompatibility complex (MHC-I molecules on DCs, but not MHC-II. The expressions of CD40, CD80, and CD86 and that of MHC-II molecules on B cells were also upregulated. Moreover, suppression of tumor growth and lifetime prolongation was observed in DRibble-DC-vaccinated tumor-bearing mice.Conclusion: Our results demonstrate that naïve T cells can be activated effectively by

  15. Mitochondrial Fusion in Yeast Requires the Transmembrane GTPase Fzo1p

    OpenAIRE

    Hermann, Greg J.; Thatcher, John W.; Mills, John P.; Hales, Karen G.; Fuller, Margaret T.; Nunnari, Jodi; Shaw, Janet M.

    1998-01-01

    Membrane fusion is required to establish the morphology and cellular distribution of the mitochondrial compartment. In Drosophila, mutations in the fuzzy onions (fzo) GTPase block a developmentally regulated mitochondrial fusion event during spermatogenesis. Here we report that the yeast orthologue of fuzzy onions, Fzo1p, plays a direct and conserved role in mitochondrial fusion. A conditional fzo1 mutation causes the mitochondrial reticulum to fragment and blocks mitochondrial fusion during ...

  16. Fusion Machinery

    DEFF Research Database (Denmark)

    Sørensen, Jakob Balslev; Milosevic, Ira

    2015-01-01

    the vesicular SNARE VAMP2/synaptobrevin-2 and the target (plasma membrane) SNAREs SNAP25 and syntaxin-1 results in fusion and release of neurotransmitter, synchronized to the electrical activity of the cell by calcium influx and binding to synaptotagmin. Formation of the SNARE complex is tightly regulated...... and appears to start with syntaxin-1 bound to an SM (Sec1/Munc18-like) protein. Proteins of the Munc13-family are responsible for opening up syntaxin and allowing sequential binding of SNAP-25 and VAMP2/synaptobrevin-2. N- to C-terminal “zippering” of the SNARE domains leads to membrane fusion...

  17. PCNN-Based Image Fusion in Compressed Domain

    Directory of Open Access Journals (Sweden)

    Yang Chen

    2015-01-01

    Full Text Available This paper addresses a novel method of image fusion problem for different application scenarios, employing compressive sensing (CS as the image sparse representation method and pulse-coupled neural network (PCNN as the fusion rule. Firstly, source images are compressed through scrambled block Hadamard ensemble (SBHE for its compression capability and computational simplicity on the sensor side. Local standard variance is input to motivate PCNN and coefficients with large firing times are selected as the fusion coefficients in compressed domain. Fusion coefficients are smoothed by sliding window in order to avoid blocking effect. Experimental results demonstrate that the proposed fusion method outperforms other fusion methods in compressed domain and is effective and adaptive in different image fusion applications.

  18. Short fusion

    CERN Multimedia

    2002-01-01

    French and UK researchers are perfecting a particle accelerator technique that could aid the quest for fusion energy or make X-rays that are safer and produce higher-resolution images. Led by Dr Victor Malka from the Ecole Nationale Superieure des Techniques Avancees in Paris, the team has developed a better way of accelerating electrons over short distances (1 page).

  19. Magnetic fusion

    International Nuclear Information System (INIS)

    This document is a detailed lecture on thermonuclear fusion. The basic physics principles are recalled and the technological choices that have led to tokamaks or stellarators are exposed. Different aspects concerning thermonuclear reactors such as safety, economy and feasibility are discussed. Tore-supra is described in details as well as the ITER project

  20. Magnetic fusion; La fusion magnetique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This document is a detailed lecture on thermonuclear fusion. The basic physics principles are recalled and the technological choices that have led to tokamaks or stellarators are exposed. Different aspects concerning thermonuclear reactors such as safety, economy and feasibility are discussed. Tore-supra is described in details as well as the ITER project.

  1. Tame Fusion

    Institute of Scientific and Technical Information of China (English)

    S.D. Scott

    2003-01-01

    The first section of this paper covers preliminaries. Essentially, the next four cover units. It is shown that a compatible nearring with DCCR is Nnilpotent if and only if every maximal right N-subgroup is a right ideal. The last five sections relate to fusion (I.e., N-groups minimal for being generated by Nsubgroups, where each is N-isomorphic to a given N-group). Right N-subgroups of a tame nearring N with DCCR, minimal for not annihilating a minimal ideal from the left, are self monogenic and N-isomorphic. That this holds for any collection of minimal ideals is significant. Here, the right N-subgroup involved is a 'fusion product' of the 'components'.

  2. Fusion rules of equivariantizations of fusion categories

    OpenAIRE

    Burciu, Sebastian; Natale, Sonia

    2012-01-01

    We determine the fusion rules of the equivariantization of a fusion category $\\mathcal{C}$ under the action of a finite group $G$ in terms of the fusion rules of $\\mathcal{C}$ and group-theoretical data associated to the group action. As an application we obtain a formula for the fusion rules in an equivariantization of a pointed fusion category in terms of group-theoretical data. This entails a description of the fusion rules in any braided group-theoretical fusion category.

  3. Cold Fusion

    OpenAIRE

    Zhang, Chu; Yue, Manyu; Yu, Huanzhang; Chen, Cheng

    2006-01-01

    Science can often result in technologies which can solve energy problems in societies. On March 23, 1989, two scientists Stanley Pons and Martin Fleischmann claimed at a press conference that they had been able to perform nuclear fusion at room temperature. Their claim was quickly investigated and checked by many scientists around the world. Their discovery generated a heated debate in the scientific literature and magazines in the next few years, and their work was criticized for being unsci...

  4. Carpal Fusion

    OpenAIRE

    Jalal Jalalshokouhi; Mohammad Hossein Herischi; Shahyar Pashaei; Ali Akbar Ameri

    2012-01-01

    Carpal fusion may be seen in hereditary and nonhereditary conditions such as acrocallosal syndrome,acromegaly, Apert syndrome, arthrogryposis, Carpenter syndrome, chromosomal abnormalities, ectrodactyly-ectodermal dysplasia-cleft (EEC) syndrome, the F form of acropectorovertebral dysgenesis or the F syndrome, fetal alcohol syndrome, Holt-Oram syndrome, Leopard syndrome, multiple synostosis syndrome, oligosyndactyly syndrome, Pfeiffer-like syndrome, scleroderma, split hand and foot malformatio...

  5. FUSION WORLD

    Institute of Scientific and Technical Information of China (English)

    Caroline; 黄颖(翻译)

    2009-01-01

    Fusion World”科技展示体验中心是英国设计公司MET Studio为新加坡科技研究局(A*Star)的科学工程委员会(SERC)所设计的,位于启汇城的办公地点,用于展示该委员会的精选技术作品,以吸引潜在的客户和启汇城内的学生购买群体。

  6. Carpal Fusion

    Directory of Open Access Journals (Sweden)

    Jalal Jalalshokouhi*

    2012-05-01

    Full Text Available Carpal fusion may be seen in hereditary and nonhereditary conditions such as acrocallosal syndrome,acromegaly, Apert syndrome, arthrogryposis, Carpenter syndrome, chromosomal abnormalities, ectrodactyly-ectodermal dysplasia-cleft (EEC syndrome, the F form of acropectorovertebral dysgenesis or the F syndrome, fetal alcohol syndrome, Holt-Oram syndrome, Leopard syndrome, multiple synostosis syndrome, oligosyndactyly syndrome, Pfeiffer-like syndrome, scleroderma, split hand and foot malformation, Stickler syndrome, thalidomide embryopathy, Turner syndrome and many other conditions as mentioned in Rubinstein-Taybi's book. Sometimes there is no known causative disease.Diagnosis is usually made by plain X-ray during studying a syndrome or congenital disease or could be an incidental finding like our patients. Hand bone anomalies are more common in syndromes or other congenital or non-hereditary conditions, but polydactyly, syndactyly or oligodactyly and carpal fusions are interesting. X-ray is the modality of choice, but MRI and X-ray CT with multiplanar reconstructions may be used for diagnosis.

  7. Gradient-based compressive image fusion

    Institute of Scientific and Technical Information of China (English)

    Yang CHEN‡; Zheng QIN

    2015-01-01

    We present a novel image fusion scheme based on gradient and scrambled block Hadamard ensemble (SBHE) sam-pling for compressive sensing imaging. First, source images are compressed by compressive sensing, to facilitate the transmission of the sensor. In the fusion phase, the image gradient is calculated to reflect the abundance of its contour information. By com-positing the gradient of each image, gradient-based weights are obtained, with which compressive sensing coefficients are achieved. Finally, inverse transformation is applied to the coefficients derived from fusion, and the fused image is obtained. Information entropy (IE), Xydeas’s and Piella’s metrics are applied as non-reference objective metrics to evaluate the fusion quality in line with different fusion schemes. In addition, different image fusion application scenarios are applied to explore the scenario adaptability of the proposed scheme. Simulation results demonstrate that the gradient-based scheme has the best per-formance, in terms of both subjective judgment and objective metrics. Furthermore, the gradient-based fusion scheme proposed in this paper can be applied in different fusion scenarios.

  8. Reactor for boron fusion with picosecond ultrahigh power laser pulses and ultrahigh magnetic field trapping

    CERN Document Server

    Miley, G H; Kirchhoff, G

    2015-01-01

    Compared with the deuterium tritium (DT) fusion, the environmentally clean fusion of protons with 11B is extremely difficult. When instead of nanosecond laser pulses for thermal-ablating driven ignition, picosecond pulses are used, a drastic change by nonlinearity results in ultrahigh acceleration of plasma blocks. This radically changes to economic boron fusion by a measured new avalanche ignition.

  9. Ultrasound guided supraclavicular block.

    LENUS (Irish Health Repository)

    Hanumanthaiah, Deepak

    2013-09-01

    Ultrasound guided regional anaesthesia is becoming increasingly popular. The supraclavicular block has been transformed by ultrasound guidance into a potentially safe superficial block. We reviewed the techniques of performing supraclavicular block with special focus on ultrasound guidance.

  10. Catalysed fusion

    CERN Document Server

    Farley, Francis

    2012-01-01

    A sizzling romance and a romp with subatomic particles at CERN. Love, discovery and adventure in the city where nations meet and beams collide. Life in a large laboratory. As always, the challenges are the same. Who leads? Who follows? Who succeeds? Who gets the credit? Who gets the women or the men? Young Jeremy arrives in CERN and joins the quest for green energy. Coping with baffling jargon and manifold dangers, he is distracted by radioactive rats, lovely ladies and an unscrupulous rival. Full of doubts and hesitations, he falls for a dazzling Danish girl, who leads him astray. His brilliant idea leads to a discovery and a new route to cold fusion. But his personal life is scrambled. Does it bring fame or failure? Tragedy or triumph?

  11. Creative Construction: Unit Blocks.

    Science.gov (United States)

    Texas Child Care, 1999

    1999-01-01

    Describes the use of unit blocks with young children in early childhood education (ECE) settings to expand all areas of the curriculum. Discusses the origin of blocks in ECE programs, presents developmental stages of block play, describes children's building styles, and makes recommendations for getting started in block play for children of…

  12. Fusion energy

    International Nuclear Information System (INIS)

    The main purpose of the International Thermonuclear Experimental Reactor (ITER) is to develop an experimental fusion reactor through the united efforts of many technologically advanced countries. The ITER terms of reference, issued jointly by the European Community, Japan, the USSR, and the United States, call for an integrated international design activity and constitute the basis of current activities. Joint work on ITER is carried out under the auspices of the International Atomic Energy Agency (IAEA), according to the terms of quadripartite agreement reached between the European Community, Japan, the USSR, and the United States. The site for joint technical work sessions is at the MaxPlanck Institute of Plasma Physics. Garching, Federal Republic of Germany. The ITER activities have two phases: a definition phase performed in 1988 and the present design phase (1989--1990). During the definition phase, a set of ITER technical characteristics and supporting research and development (R ampersand D) activities were developed and reported. The present conceptual design phase of ITER lasts until the end of 1990. The objectives of this phase are to develop the design of ITER, perform a safety and environmental analysis, develop site requirements, define future R ampersand D needs, and estimate cost, manpower, and schedule for construction and operation. A final report will be submitted at the end of 1990. This paper summarizes progress in the ITER program during the 1989 design phase

  13. GS-5806 Inhibits Pre- to Postfusion Conformational Changes of the Respiratory Syncytial Virus Fusion Protein

    OpenAIRE

    Samuel, Dharmaraj; Xing, Weimei; Niedziela-Majka, Anita; Wong, Jinny S; Hung, Magdeleine; Brendza, Katherine M.; Perron, Michel; Jordan, Robert; Sperandio, David; Liu, Xiaohong; Mackman, Richard; Sakowicz, Roman

    2015-01-01

    GS-5806 is a small-molecule inhibitor of human respiratory syncytial virus fusion protein-mediated viral entry. During viral entry, the fusion protein undergoes major conformational changes, resulting in fusion of the viral envelope with the host cell membrane. This process is reproduced in vitro using a purified, truncated respiratory syncytial virus (RSV) fusion protein. GS-5806 blocked these conformational changes, suggesting a possible mechanism for antiviral activity.

  14. Importin β Negatively Regulates Nuclear Membrane Fusion and Nuclear Pore Complex Assembly

    OpenAIRE

    Harel, Amnon; Chan, Rene C.; Lachish-Zalait, Aurelie; Zimmerman, Ella; Elbaum, Michael; Forbes, Douglass J.

    2003-01-01

    Assembly of a eukaryotic nucleus involves three distinct events: membrane recruitment, fusion to form a double nuclear membrane, and nuclear pore complex (NPC) assembly. We report that importin β negatively regulates two of these events, membrane fusion and NPC assembly. When excess importin β is added to a full Xenopus nuclear reconstitution reaction, vesicles are recruited to chromatin but their fusion is blocked. The importin β down-regulation of membrane fusion is Ran-GTP reversible. Inde...

  15. Real Time Face Detection Using Skin Detection (Block Approach)

    OpenAIRE

    Muhammad Sharif; Sajjad Mohsin; Muhammad Younas Javed

    2011-01-01

    Role of Face recognition in security applications can never be overstated, that is why researchers around the world are still actively participating in this area. The initial step in the procedure of face recognition is to detect it efficiently. In this paper, a hybrid technique is being proposed using skin detection (in RGB color space) and block approach. This fusion is proposed to achieve fast skin detection. Along with the fusion, template matching is also used for detection purpose. Bloc...

  16. Bemerkungen zur "kalten Fusion"

    CERN Document Server

    Kuehne, R W

    2006-01-01

    Steven Jones et al. reported to have observed nuclear fusion at room temperature. They observed this "cold fusion" by electrolyzing heavy water. Later experiments confirmed these observations. These experiments confirmed the generation of strong electric fields within the deuterided metals. These electric fields accelerate the deuterons to keV energies and allow the observed nuclear fusion. Roman Sioda and I suggested a theoretical description of this nuclear fusion. Our "extended micro hot fusion" scenario explains how nuclear fusion can be generated over a long time within deuterided metals. Moreover we predicted the explosion of large pieces of deuterided metals. This article reviews the "cold fusion" work of Steven Jones et al. and discusses the fracto-fusion scenario. I show that the extended micro hot fusion scenario can explain the observed neutron emissions, neutron bursts, and heat bursts.

  17. MULTIFOCUS IMAGE FUSION USING CLOUD MODEL

    Directory of Open Access Journals (Sweden)

    K. Kannan

    2014-11-01

    Full Text Available This paper proposes a multifocus image fusion algorithm based on cloud model. First, each source images are divided into overlapping image blocks of size (2N+1 × (2N+1 and then the mean and entropy of every image pixels over this neighborhood window was calculated and compared in Cloud domain. The pixel with higher magnitude of the calculated image features was selected to form the fused image. The results of multifocus image fusion using this algorithm hold favorable consistency in terms of root mean square error, peak signal to noise ratio and quality index for three pairs of test images and confirm the effectiveness of the proposed algorithm.

  18. Review of fusion synfuels

    International Nuclear Information System (INIS)

    Thermonuclear fusion offers an inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of approx. 40 to 60% and hydrogen production efficiencies by high-temperature electrolysis of approx. 50 to 65% are projected for fusion reactors using high-temperatures blankets. Fusion/coal symbiotic systems appear economically promising for the first generation of commercial fusion synfuels plants. Coal production requirements and the environmental effects of large-scale coal usage would be greatly reduced by a fusion/coal system. In the long term, there could be a gradual transition to an inexhaustible energy system based solely on fusion

  19. Fusion Canada issue 23

    International Nuclear Information System (INIS)

    A short bulletin from the National Fusion Program highlighting in this issue TdeV tokamak updates, fusion research in Korea, CCFM program review, TdeV divertor plasma, and CFFTP program review. 4 figs

  20. Fusion Canada issue 20

    International Nuclear Information System (INIS)

    Fusion Canada's publication of the National Fusion Program. Included in this issue is the CFFTP Industrial Impact Study, CCFM/TdeV Update:helium pumping, research funds, and deuterium in beryllium - high temperature behaviour. 3 figs

  1. Blocking and associability change.

    Science.gov (United States)

    Jones, Peter M; Haselgrove, Mark

    2013-07-01

    Blocking of learning about a conditioned stimulus (the "blocked" cue) occurs when it is trained alongside an additional stimulus (the "blocking" cue) that has been previously presented with the outcome. A number of theories (e.g., N. J. Mackintosh. 1975a. A Theory of Attention: Variations in the Associability of Stimuli With Reinforcement. Psychological Review, 82, 276-298; J. M. Pearce & G. Hall. 1980. A Model for Pavlovian Learning: Variation in the Effectiveness of Conditioned But Not Unconditioned Stimuli. Psychological Review, 87, 532-552) account for this attenuation in learning by proposing that attention paid to the blocked cue is restricted. In three experiments, we examined the associability of both blocked and blocking cues. In Experiment 1, rats were trained with a blocking protocol before being given a test discrimination composed of two components; one of these components required the use of the previously blocked cue as a discriminative stimulus, and the other component was soluble by using the blocking cue. To our surprise, the component that depended on the blocked cue was more readily solved than the component dependent on the blocking cue. The results of Experiments 2 and 3 suggest that this is due to the quantity of exposure that each stimulus received during initial training. Implications for theories of blocking, and more widely associative learning, are discussed. PMID:23668185

  2. Blocking and associability change.

    Science.gov (United States)

    Jones, Peter M; Haselgrove, Mark

    2013-07-01

    Blocking of learning about a conditioned stimulus (the "blocked" cue) occurs when it is trained alongside an additional stimulus (the "blocking" cue) that has been previously presented with the outcome. A number of theories (e.g., N. J. Mackintosh. 1975a. A Theory of Attention: Variations in the Associability of Stimuli With Reinforcement. Psychological Review, 82, 276-298; J. M. Pearce & G. Hall. 1980. A Model for Pavlovian Learning: Variation in the Effectiveness of Conditioned But Not Unconditioned Stimuli. Psychological Review, 87, 532-552) account for this attenuation in learning by proposing that attention paid to the blocked cue is restricted. In three experiments, we examined the associability of both blocked and blocking cues. In Experiment 1, rats were trained with a blocking protocol before being given a test discrimination composed of two components; one of these components required the use of the previously blocked cue as a discriminative stimulus, and the other component was soluble by using the blocking cue. To our surprise, the component that depended on the blocked cue was more readily solved than the component dependent on the blocking cue. The results of Experiments 2 and 3 suggest that this is due to the quantity of exposure that each stimulus received during initial training. Implications for theories of blocking, and more widely associative learning, are discussed.

  3. Bemerkungen zur "kalten Fusion"

    OpenAIRE

    Kuehne, Rainer W.

    2006-01-01

    Steven Jones et al. reported to have observed nuclear fusion at room temperature. They observed this "cold fusion" by electrolyzing heavy water. Later experiments confirmed these observations. These experiments confirmed the generation of strong electric fields within the deuterided metals. These electric fields accelerate the deuterons to keV energies and allow the observed nuclear fusion. Roman Sioda and I suggested a theoretical description of this nuclear fusion. Our "extended micro hot f...

  4. Cold fusion research

    International Nuclear Information System (INIS)

    I am pleased to forward to you the Final Report of the Cold Fusion Panel. This report reviews the current status of cold fusion and includes major chapters on Calorimetry and Excess Heat, Fusion Products and Materials Characterization. In addition, the report makes a number of conclusions and recommendations, as requested by the Secretary of Energy

  5. Towards cognitive image fusion

    NARCIS (Netherlands)

    Toet, A.; Hogervorst, M.A.; Nikolov, S.G.; Lewis, J.J.; Dixon, T.D.; Bull, D.R.; Canagarajah, C.N.

    2010-01-01

    The increasing availability and deployment of imaging sensors operating in multiple spectral bands has led to a large research effort in image fusion, resulting in a plethora of pixel-level image fusion algorithms. However, the cognitive aspects of multisensor image fusion have not received much att

  6. Towards cognitive image fusion

    NARCIS (Netherlands)

    Toet, A.; Hogervorst, M.A.; Nikolov, S.G.; Lewis, J.; Dixon, T.; Bull, D.; Canagarajah, N.

    2007-01-01

    The increasing availability and deployment of imaging sensors operating in multiple spectral bands has led to a large research effort in image fusion, resulting in a plethora of pixel-level image fusion algorithms. However, the cognitive aspects of multisensor image fusion have not received much att

  7. Fusion technology program

    International Nuclear Information System (INIS)

    The report summarizes work performed in the following areas: system and safety studies for fusion reactors; nuclear data for fusion reactors; neutronics calculations for fusion reactors; radiation damage of vanadium alloys and stainless steel 316; facility for in-pile crack growth measurement; niobium tin magnet for Sultan - stage II; development of NET conductor; and development of ceramic tritium breeding materials

  8. Magneto-Inertial Fusion

    International Nuclear Information System (INIS)

    In this community white paper, we describe an approach to achieving fusion which employs a hybrid of elements from the traditional magnetic and inertial fusion concepts, called magneto-inertial fusion (MIF). The status of MIF research in North America at multiple institutions is summarized including recent progress, research opportunities, and future plans

  9. Fusion Canada issue 18

    International Nuclear Information System (INIS)

    A short bulletin from the National Fusion Program. Included in this issue is a report on the ITER agreement signed with the EDA, the robotic maintenance for NET, the CFFTP Fusion Pilot Study, the new IEA joint programs on environment, safety and economic aspects of fusion power, and a review by the CCFM advisory committee. 3 figs

  10. Real Time Face Detection Using Skin Detection (Block Approach

    Directory of Open Access Journals (Sweden)

    Muhammad Sharif

    2011-01-01

    Full Text Available Role of Face recognition in security applications can never be overstated, that is why researchers around the world are still actively participating in this area. The initial step in the procedure of face recognition is to detect it efficiently. In this paper, a hybrid technique is being proposed using skin detection (in RGB color space and block approach. This fusion is proposed to achieve fast skin detection. Along with the fusion, template matching is also used for detection purpose. Block approach for skin detection means dividing the image into square blocks virtually and then applying the detection ratios on corner pixels. If the corner pixels satisfy the ratios completely, the whole block will be considered as a skin block and if none of them satisfies these ratios, the block will be treated as a non-skin block. Even if some of the corner pixels satisfy the ratios, then the block will be searched for skin pixels. In this way, it will rapidly detect a face in an image including high resolution pixels. The experiments are carried out and the results have shown the significant improvements both in time and accuracy of the detection, that has prove the fastness and robustness of the proposed technique.

  11. Generalized Block Failure

    DEFF Research Database (Denmark)

    Jönsson, Jeppe

    2015-01-01

    Block tearing is considered in several codes as a pure block tension or a pure block shear failure mechanism. However in many situations the load acts eccentrically and involves the transfer of a substantial moment in combination with the shear force and perhaps a normal force. A literature study...... yield lines around the block leads to simple interaction formulas similar to other interaction formulas in the codes.......Block tearing is considered in several codes as a pure block tension or a pure block shear failure mechanism. However in many situations the load acts eccentrically and involves the transfer of a substantial moment in combination with the shear force and perhaps a normal force. A literature study...

  12. Exploring Forensic Implications of the Fusion Drive

    Directory of Open Access Journals (Sweden)

    Shruti Gupta

    2014-09-01

    Full Text Available This paper explores the forensic implications of Apple's Fusion Drive. The Fusion Drive is an example of auto-tiered storage. It uses a combination of a flash drive and a magnetic drive. Data is moved between the drives automatically to maximize system performance. This is different from traditional caches because data is moved and not simply copied. The research included understanding the drive structure, populating the drive, and then accessing data in a controlled setting to observe data migration strategies. It was observed that all the data is first written to the flash drive with 4 GB of free space always maintained. If data on the magnetic drive is frequently accessed, it is promoted to the flash drive while demoting other information. Data is moved at a block-level and not a file-level. The Fusion Drive didn't alter the timestamps of files with data migration.

  13. Magnetized target fusion and fusion propulsion.

    Energy Technology Data Exchange (ETDEWEB)

    Kirkpatrick, R. C. (Ronald C.)

    2001-01-01

    Magnetized target fusion (MTF) is a thermonuclear fusion concept that is intermediate between the two mainline approaches, magnetic confinement and inertial confinement fusion (MCF and ICF). MTF incorporates some aspects of each and offers advantages over each of the mainline approaches. First, it provides a means of reducing the driver power requirements, thereby admitting a wider range of drivers than ICF. Second, the magnetic field is only used for insulation, not confinement, and the plasma is wall confined, so that plasma instabilities are traded in for hydrodynamic instabilities. However, the degree of compression required to reach fusion conditions is lower than for ICF, so that hydrodynamic instabilities are much less threatening. The standoff driver innovation proposes to dynamically form the target plasma and a gaseous shell that compresses and confines the target plasma. Therefore, fusion target fabrication is traded in for a multiplicity of plasma guns, which must work in synchrony. The standoff driver embodiment of MTF leads to a fusion propulsion system concept that is potentially compact and lightweight. We will discuss the underlying physics of MTF and some of the details of the fusion propulsion concept using the standoff driver approach. We discuss here the optimization of an MTF target design for space propulsion.

  14. Thermal Resonance Fusion

    OpenAIRE

    Dong, Bao-Guo

    2015-01-01

    We first show a possible mechanism to create a new type of nuclear fusion, thermal resonance fusion, i.e. low energy nuclear fusion with thermal resonance of light nuclei or atoms, such as deuterium or tritium. The fusion of two light nuclei has to overcome the Coulomb barrier between these two nuclei to reach up to the interacting region of nuclear force. We found nuclear fusion could be realized with thermal vibrations of crystal lattice atoms coupling with light atoms at low energy by reso...

  15. Fusion applications study: FAME

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.R.

    1986-01-01

    Fusion has a wide spectrum of applications that appear technically possible and may become economically feasible. Near-term (approx. 2000) application for production of nuclear fuels and useful radioisotopes is an economically attractive possibility as soon as fusion is ready. Electricity production will remain a prime, large-scale application of fusion. In the longer term, as fossil fuels dwindle, production of hydrogen could become a major application. Additional applications some of which have not even been conceived of yet, will add to this potential richness and diversity of fusion. It is the purpose of the fusion applications study - FMAE - to innovate, investigate, and evaluate these potential applications.

  16. Fusion of perceptions for perceptual robotics

    OpenAIRE

    Ciftcioglu, O.; Bittermann, M.S.; Sariyildiz, I.S.

    2006-01-01

    Fusion of perception information for perceptual robotics is described. The visual perception is mathematically modelled as a probabilistic process obtaining and interpreting visual data from an environment. The visual data is processed in a multiresolutional form via wavelet transform and optimally estimated via extended Kalman filtering in each resolution level and the outcomes are fused for each data block. The measurement involves visual perception in the virtual reality which has direct i...

  17. Inhibition of HIV-1 endocytosis allows lipid mixing at the plasma membrane, but not complete fusion

    Directory of Open Access Journals (Sweden)

    de la Vega Michelle

    2011-12-01

    Full Text Available Abstract Background We recently provided evidence that HIV-1 enters HeLa-derived TZM-bl and lymphoid CEMss cells by fusing with endosomes, whereas its fusion with the plasma membrane does not proceed beyond the lipid mixing step. The mechanism of restriction of HIV-1 fusion at the cell surface and/or the factors that aid the virus entry from endosomes remain unclear. Results We examined HIV-1 fusion with a panel of target cells lines and with primary CD4+ T cells. Kinetic measurements of fusion combined with time-resolved imaging of single viruses further reinforced the notion that HIV-1 enters the cells via endocytosis and fusion with endosomes. Furthermore, we attempted to deliberately redirect virus fusion to the plasma membrane, using two experimental strategies. First, the fusion reaction was synchronized by pre-incubating the viruses with cells at reduced temperature to allow CD4 and coreceptors engagement, but not the virus uptake or fusion. Subsequent shift to a physiological temperature triggered accelerated virus uptake followed by entry from endosomes, but did not permit fusion at the cell surface. Second, blocking HIV-1 endocytosis by a small-molecule dynamin inhibitor, dynasore, resulted in transfer of viral lipids to the plasma membrane without any detectable release of the viral content into the cytosol. We also found that a higher concentration of dynasore is required to block the HIV-endosome fusion compared to virus internalization. Conclusions Our results further support the notion that HIV-1 enters disparate cell types through fusion with endosomes. The block of HIV-1 fusion with the plasma membrane at a post-lipid mixing stage shows that this membrane is not conducive to fusion pore formation and/or enlargement. The ability of dynasore to interfere with the virus-endosome fusion suggests that dynamin could be involved in two distinct steps of HIV-1 entry - endocytosis and fusion within intracellular compartments.

  18. Viral membrane fusion

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Stephen C., E-mail: harrison@crystal.harvard.edu

    2015-05-15

    Membrane fusion is an essential step when enveloped viruses enter cells. Lipid bilayer fusion requires catalysis to overcome a high kinetic barrier; viral fusion proteins are the agents that fulfill this catalytic function. Despite a variety of molecular architectures, these proteins facilitate fusion by essentially the same generic mechanism. Stimulated by a signal associated with arrival at the cell to be infected (e.g., receptor or co-receptor binding, proton binding in an endosome), they undergo a series of conformational changes. A hydrophobic segment (a “fusion loop” or “fusion peptide”) engages the target-cell membrane and collapse of the bridging intermediate thus formed draws the two membranes (virus and cell) together. We know of three structural classes for viral fusion proteins. Structures for both pre- and postfusion conformations of illustrate the beginning and end points of a process that can be probed by single-virion measurements of fusion kinetics. - Highlights: • Viral fusion proteins overcome the high energy barrier to lipid bilayer merger. • Different molecular structures but the same catalytic mechanism. • Review describes properties of three known fusion-protein structural classes. • Single-virion fusion experiments elucidate mechanism.

  19. Viral membrane fusion

    International Nuclear Information System (INIS)

    Membrane fusion is an essential step when enveloped viruses enter cells. Lipid bilayer fusion requires catalysis to overcome a high kinetic barrier; viral fusion proteins are the agents that fulfill this catalytic function. Despite a variety of molecular architectures, these proteins facilitate fusion by essentially the same generic mechanism. Stimulated by a signal associated with arrival at the cell to be infected (e.g., receptor or co-receptor binding, proton binding in an endosome), they undergo a series of conformational changes. A hydrophobic segment (a “fusion loop” or “fusion peptide”) engages the target-cell membrane and collapse of the bridging intermediate thus formed draws the two membranes (virus and cell) together. We know of three structural classes for viral fusion proteins. Structures for both pre- and postfusion conformations of illustrate the beginning and end points of a process that can be probed by single-virion measurements of fusion kinetics. - Highlights: • Viral fusion proteins overcome the high energy barrier to lipid bilayer merger. • Different molecular structures but the same catalytic mechanism. • Review describes properties of three known fusion-protein structural classes. • Single-virion fusion experiments elucidate mechanism

  20. Blocked Randomization with Randomly Selected Block Sizes

    Directory of Open Access Journals (Sweden)

    Jimmy Efird

    2010-12-01

    Full Text Available When planning a randomized clinical trial, careful consideration must be given to how participants are selected for various arms of a study. Selection and accidental bias may occur when participants are not assigned to study groups with equal probability. A simple random allocation scheme is a process by which each participant has equal likelihood of being assigned to treatment versus referent groups. However, by chance an unequal number of individuals may be assigned to each arm of the study and thus decrease the power to detect statistically significant differences between groups. Block randomization is a commonly used technique in clinical trial design to reduce bias and achieve balance in the allocation of participants to treatment arms, especially when the sample size is small. This method increases the probability that each arm will contain an equal number of individuals by sequencing participant assignments by block. Yet still, the allocation process may be predictable, for example, when the investigator is not blind and the block size is fixed. This paper provides an overview of blocked randomization and illustrates how to avoid selection bias by using random block sizes.

  1. Blocked randomization with randomly selected block sizes.

    Science.gov (United States)

    Efird, Jimmy

    2011-01-01

    When planning a randomized clinical trial, careful consideration must be given to how participants are selected for various arms of a study. Selection and accidental bias may occur when participants are not assigned to study groups with equal probability. A simple random allocation scheme is a process by which each participant has equal likelihood of being assigned to treatment versus referent groups. However, by chance an unequal number of individuals may be assigned to each arm of the study and thus decrease the power to detect statistically significant differences between groups. Block randomization is a commonly used technique in clinical trial design to reduce bias and achieve balance in the allocation of participants to treatment arms, especially when the sample size is small. This method increases the probability that each arm will contain an equal number of individuals by sequencing participant assignments by block. Yet still, the allocation process may be predictable, for example, when the investigator is not blind and the block size is fixed. This paper provides an overview of blocked randomization and illustrates how to avoid selection bias by using random block sizes. PMID:21318011

  2. BLOCK H-MATRICES AND SPECTRUM OF BLOCK MATRICES

    Institute of Scientific and Technical Information of China (English)

    黄廷祝; 黎稳

    2002-01-01

    The block H-matrices are studied by the concept of G-functions, several concepts of block matrices are introduced. Equivalent characters of block H-matrices are obtained. Spectrum localizations claracterized by Gfunctions for block matrices are got.

  3. The fusion breeder

    International Nuclear Information System (INIS)

    The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the U.S. fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the U.S. fusion program and the U.S. nuclear energy program. There is wide agreement that many approaches will work and will produce fuel for five equal-sized LWRs, and some approach as many as 20 LWRs at electricity costs within 20% of those at today's price of uranium ($30/lb of U3O8). The blankets designed to suppress fissioning, called symbiotes, fusion fuel factories, or just fusion breeders, will have safety characteristics more like pure fusion reactors and will support as many as 15 equal power LWRs. The blankets designed to maximize fast fission of fertile material will have safety characteristics more like fission reactors and will support 5 LWRs. This author strongly recommends development of the fission suppressed blanket type, a point of view not agreed upon by everyone. There is, however, wide agreement that, to meet the market price for uranium which would result in LWR electricity within 20% of today's cost with either blanket type, fusion components can cost severalfold more than would be allowed for pure fusion to meet the goal of making electricity alone at 20% over today's fission costs. Also widely agreed is that the critical-pathitem for the fusion breeder is fusion development itself; however, development of fusion breeder specific items (blankets, fuel cycle) should be started now in order to have the fusion breeder by the time the rise in uranium prices forces other more costly choices

  4. Lesson Thirteen Trifascicular Block

    Institute of Scientific and Technical Information of China (English)

    鲁端; 王劲

    2005-01-01

    @@ A complete trifascicular block would result in complete AV block. The idio ventricular rhythm has a slower rate and a wide QRS complex because the pacemaker is located at the peripheral part of the conduction system distal to the sites of the block1. Such a rhythm may be difficult to differentiate from bifascicular or bundle branch block combined with complete block at a higher level such as the AV node or His bundle2. Besides a slower ventricular rate, a change in the morphology of the QRS complex from a previous known bifascicular pattern would be strongly suggestive of a trifascicular origin of the complete AV block3. A His bundle recording is required for a definitive diagnosis, however.

  5. Block Advertisement Protocol

    OpenAIRE

    Nemirovsky, Danil

    2015-01-01

    Bitcoin, a decentralized cryptocurrency, has attracted a lot of attention from academia, financial service industry and enthusiasts. The trade-off between transaction confirmation throughput and centralization of hash power do not allow Bitcoin to perform at the same level as modern payment systems. Block Advertisement Protocol is proposed as a step to resolve this issue. The protocol allows block mining and block relaying to happen in parallel. The protocol dictates a miner to advertise the ...

  6. Block Cipher Analysis

    DEFF Research Database (Denmark)

    Miolane, Charlotte Vikkelsø

    ensurethat no attack violatesthe securitybounds specifiedbygeneric attack namely exhaustivekey search and table lookup attacks. This thesis contains a general introduction to cryptography with focus on block ciphers and important block cipher designs, in particular the Advanced Encryption Standard...... on small scale variants of AES. In the final part of the thesis we present a new block cipher proposal Present and examine its security against algebraic and differential cryptanalysis in particular....

  7. Materials research for fusion

    Science.gov (United States)

    Knaster, J.; Moeslang, A.; Muroga, T.

    2016-05-01

    Fusion materials research started in the early 1970s following the observation of the degradation of irradiated materials used in the first commercial fission reactors. The technological challenges of fusion energy are intimately linked with the availability of suitable materials capable of reliably withstanding the extremely severe operational conditions of fusion reactors. Although fission and fusion materials exhibit common features, fusion materials research is broader. The harder mono-energetic spectrum associated with the deuterium-tritium fusion neutrons (14.1 MeV compared to average for fission neutrons) releases significant amounts of hydrogen and helium as transmutation products that might lead to a (at present undetermined) degradation of structural materials after a few years of operation. Overcoming the historical lack of a fusion-relevant neutron source for materials testing is an essential pending step in fusion roadmaps. Structural materials development, together with research on functional materials capable of sustaining unprecedented power densities during plasma operation in a fusion reactor, have been the subject of decades of worldwide research efforts underpinning the present maturity of the fusion materials research programme.

  8. Economics of fusion research

    International Nuclear Information System (INIS)

    This report provides the results of a study of methods of economic analysis applied to the evaluation of fusion research. The study recognizes that a hierarchy of economic analyses of research programs exists: standard benefit-cost analysis, expected value of R and D information, and expected utility analysis. It is shown that standard benefit-cost analysis, as commonly applied to research programs, is inadequate for the evaluation of a high technology research effort such as fusion research. A methodology for performing an expected value analysis is developed and demonstrated and an overview of an approach to perform an expected utility analysis of fusion research is presented. In addition, a potential benefit of fusion research, not previously identified, is discussed and rough estimates of its magnitude are presented. This benefit deals with the effect of a fusion research program on optimal fossil fuel consumption patterns. The results of this study indicate that it is both appropriate and possible to perform an expected value analysis of fusion research in order to assess the economics of a fusion research program. The results indicate further that the major area of benefits of fusion research is likely due to the impact of a fusion research program on optimal fossil fuel consumption patterns and it is recommended that this benefit be included in future assessments of fusion research economics

  9. Economics of fusion research

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1977-10-15

    This report provides the results of a study of methods of economic analysis applied to the evaluation of fusion research. The study recognizes that a hierarchy of economic analyses of research programs exists: standard benefit-cost analysis, expected value of R and D information, and expected utility analysis. It is shown that standard benefit-cost analysis, as commonly applied to research programs, is inadequate for the evaluation of a high technology research effort such as fusion research. A methodology for performing an expected value analysis is developed and demonstrated and an overview of an approach to perform an expected utility analysis of fusion research is presented. In addition, a potential benefit of fusion research, not previously identified, is discussed and rough estimates of its magnitude are presented. This benefit deals with the effect of a fusion research program on optimal fossil fuel consumption patterns. The results of this study indicate that it is both appropriate and possible to perform an expected value analysis of fusion research in order to assess the economics of a fusion research program. The results indicate further that the major area of benefits of fusion research is likely due to the impact of a fusion research program on optimal fossil fuel consumption patterns and it is recommended that this benefit be included in future assessments of fusion research economics.

  10. Fusion of Nonionic Vesicles

    DEFF Research Database (Denmark)

    Bulut, Sanja; Oskolkova, M. Z.; Schweins, R.;

    2010-01-01

    We present an experimental study of vesicle fusion using light and neutron scattering to monitor fusion events. Vesicles are reproducibly formed with an extrusion procedure using an single amphiphile triethylene glycol mono-n-decyl ether in water. They show long-term stability for temperatures...... around 20 C, but at temperatures above 26 C we observe an increase in the scattered intensity due to fusion. The system is unusually well suited for the study of basic mechanisms of vesicle fusion. The vesicles are flexible with a bending rigidity of only a few k(H)T. The monolayer spontaneous curvature......, Ho, depends strongly on temperature in a known way and is thus tunable. For temperatures where H-0 > 0 vesicles tyre long-term stable, while in the range H-0 fusion rate increases the more negative the Spontaneous curvature Through a quantitative;analysis of the fusion rate we arrive tit...

  11. Muon Catalyzed Fusion

    Science.gov (United States)

    Armour, Edward A.G.

    2007-01-01

    Muon catalyzed fusion is a process in which a negatively charged muon combines with two nuclei of isotopes of hydrogen, e.g, a proton and a deuteron or a deuteron and a triton, to form a muonic molecular ion in which the binding is so tight that nuclear fusion occurs. The muon is normally released after fusion has taken place and so can catalyze further fusions. As the muon has a mean lifetime of 2.2 microseconds, this is the maximum period over which a muon can participate in this process. This article gives an outline of the history of muon catalyzed fusion from 1947, when it was first realised that such a process might occur, to the present day. It includes a description of the contribution that Drachrnan has made to the theory of muon catalyzed fusion and the influence this has had on the author's research.

  12. Fusion research principles

    CERN Document Server

    Dolan, Thomas James

    2013-01-01

    Fusion Research, Volume I: Principles provides a general description of the methods and problems of fusion research. The book contains three main parts: Principles, Experiments, and Technology. The Principles part describes the conditions necessary for a fusion reaction, as well as the fundamentals of plasma confinement, heating, and diagnostics. The Experiments part details about forty plasma confinement schemes and experiments. The last part explores various engineering problems associated with reactor design, vacuum and magnet systems, materials, plasma purity, fueling, blankets, neutronics

  13. Magnetic fusion technology

    CERN Document Server

    Dolan, Thomas J

    2014-01-01

    Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: ? magnet systems, ? plasma heating systems, ? control systems, ? energy conversion systems, ? advanced materials development, ? vacuum systems, ? cryogenic systems, ? plasma diagnostics, ? safety systems, and ? power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

  14. Status of fusion maintenance

    International Nuclear Information System (INIS)

    Effective maintenance will be an essential ingredient in determining fusion system productivity. This level of productivity will result only after close attention is paid to the entire system as an entity and appropriate integration of the elements is made. The status of fusion maintenance is reviewed in the context of the entire system. While there are many challenging developmental tasks ahead in fusion maintenance, the required technologies are available in several high-technology industries, including nuclear fission

  15. Filter Bank Fusion frames

    OpenAIRE

    Chebira, Amina; Fickus, Matthew; Mixon, Dustin G.

    2011-01-01

    In this paper we characterize and construct novel oversampled filter banks implementing fusion frames. A fusion frame is a sequence of orthogonal projection operators whose sum can be inverted in a numerically stable way. When properly designed, fusion frames can provide redundant encodings of signals which are optimally robust against certain types of noise and erasures. However, up to this point, few implementable constructions of such frames were known; we show how to construct them using ...

  16. Fusion facility siting considerations

    International Nuclear Information System (INIS)

    Inherent in the fusion program's transition from hydrogen devices to commercial power machines is a general increase in the size and scope of succeeding projects. This growth will lead to increased emphasis on safety, environmental impact, and the external effects of fusion in general, and of each new device in particular. A critically important consideration in this regard is site selection. The purpose of this paper is to examine major siting issues that may affect the economics, safety, and environmental impact of fusion

  17. Fusion facility siting considerations

    Science.gov (United States)

    Bussell, G. T.

    1985-02-01

    Inherent in the fusion program's transition from hydrogen devices to commercial power machines is a general increase in the size and scope of succeeding projects. This growth will lead to increased emphasis on safety, environmental impact, and the external effects of fusion in general, and of each new device in particular. An important consideration in this regard is site selection. Major siting issues that may affect the economics, safety, and environmental impact of fusion are examined.

  18. Block Scheduling Revisited.

    Science.gov (United States)

    Queen, J. Allen

    2000-01-01

    Successful block scheduling depends on provision of initial and ongoing instructional training. Teaching strategies should vary and include cooperative learning, the case method, the socratic seminar, synectics, concept attainment, the inquiry method, and simulations. Recommendations for maximizing block scheduling are outlined. (Contains 52…

  19. Surviving Block Scheduling.

    Science.gov (United States)

    Haley, Marjorie

    A discussion of block scheduling for second language instruction looks at the advantages and disadvantages and offers some suggestions for classroom management and course organization. It is argued that block scheduling may offer a potential solution to large classes, insufficient time for labs, too little individualized instruction; few…

  20. Frontiers in fusion research

    CERN Document Server

    Kikuchi, Mitsuru

    2011-01-01

    Frontiers in Fusion Research provides a systematic overview of the latest physical principles of fusion and plasma confinement. It is primarily devoted to the principle of magnetic plasma confinement, that has been systematized through 50 years of fusion research. Frontiers in Fusion Research begins with an introduction to the study of plasma, discussing the astronomical birth of hydrogen energy and the beginnings of human attempts to harness the Sun's energy for use on Earth. It moves on to chapters that cover a variety of topics such as: * charged particle motion, * plasma kinetic theory, *

  1. Fusion reactor safety

    International Nuclear Information System (INIS)

    Nuclear fusion could soon become a viable energy source. Work in plasma physics, fusion technology and fusion safety is progressing rapidly in a number of Member States and international collaboration continues on work aiming at the demonstration of fusion power generation. Safety of fusion reactors and technological and radiological aspects of waste management are important aspects in the development and design of fusion machines. In order to provide an international forum to review and discuss the status and the progress made since 1983 in programmes related to operational safety aspects of fusion reactors, their waste management and decommissioning concepts, the IAEA had organized the Technical Committee on ''Fusion Reactor Safety'' in Culham, 3-7 November 1986. All presentations of this meeting were divided into four sessions: 1. Statements on National-International Fusion Safety Programmes (5 papers); 2. Operation and System Safety (15 papers); 3. Waste Management and Decommissioning (5 papers); 4. Environmental Impacts (6 papers). A separate abstract was prepared for each of these 31 papers. Refs, figs, tabs

  2. Magnetic-confinement fusion

    Science.gov (United States)

    Ongena, J.; Koch, R.; Wolf, R.; Zohm, H.

    2016-05-01

    Our modern society requires environmentally friendly solutions for energy production. Energy can be released not only from the fission of heavy nuclei but also from the fusion of light nuclei. Nuclear fusion is an important option for a clean and safe solution for our long-term energy needs. The extremely high temperatures required for the fusion reaction are routinely realized in several magnetic-fusion machines. Since the early 1990s, up to 16 MW of fusion power has been released in pulses of a few seconds, corresponding to a power multiplication close to break-even. Our understanding of the very complex behaviour of a magnetized plasma at temperatures between 150 and 200 million °C surrounded by cold walls has also advanced substantially. This steady progress has resulted in the construction of ITER, a fusion device with a planned fusion power output of 500 MW in pulses of 400 s. ITER should provide answers to remaining important questions on the integration of physics and technology, through a full-size demonstration of a tenfold power multiplication, and on nuclear safety aspects. Here we review the basic physics underlying magnetic fusion: past achievements, present efforts and the prospects for future production of electrical energy. We also discuss questions related to the safety, waste management and decommissioning of a future fusion power plant.

  3. Laser fusion program overview

    International Nuclear Information System (INIS)

    This program is structured to proceed through a series of well defined fusion milestones to proof of the scientific feasibility, of laser fusion with the Shiva Nova system. Concurrently, those key technical areas, such as advanced lasers, which are required to progress beyond proof of feasibility, are being studied. We have identified and quantified the opportunities and key technical issues in military applications, such as weapons effects simulations, and in civilian applications, such as central-station electric power production. We summarize the current status and future plans for the laser fusion program at LLL, emphasizing the civilian applications of laser fusion

  4. Membrane fusion machines of paramyxoviruses: capture of intermediates of fusion

    OpenAIRE

    Charles J Russell; Theodore S Jardetzky; Lamb, Robert A.

    2001-01-01

    Peptides derived from heptad repeat regions adjacent to the fusion peptide and transmembrane domains of many viral fusion proteins form stable helical bundles and inhibit fusion specifically. Paramyxovirus SV5 fusion (F) protein-mediated fusion and its inhibition by the peptides N-1 and C-1 were analyzed. The temperature dependence of fusion by F suggests that thermal energy, destabilizing proline residues and receptor binding by the hemagglutinin–neuraminidase (HN) protein collectively contr...

  5. Nuclear fusion inside condense matters

    Institute of Scientific and Technical Information of China (English)

    HE Jing-tang

    2007-01-01

    This article describes in detail the nuclear fusion inside condense matters--the Fleischmann-Pons effect, the reproducibility of cold fusions, self-consistentcy of cold fusions and the possible applications.

  6. Predictability of blocking

    International Nuclear Information System (INIS)

    Tibaldi and Molteni (1990, hereafter referred to as TM) had previously investigated operational blocking predictability by the ECMWF model and the possible relationships between model systematic error and blocking in the winter season of the Northern Hemisphere, using seven years of ECMWF operational archives of analyses and day 1 to 10 forecasts. They showed that fewer blocking episodes than in the real atmosphere were generally simulated by the model, and that this deficiency increased with increasing forecast time. As a consequence of this, a major contribution to the systematic error in the winter season was shown to derive from the inability of the model to properly forecast blocking. In this study, the analysis performed in TM for the first seven winter seasons of the ECMWF operational model is extended to the subsequent five winters, during which model development, reflecting both resolution increases and parametrisation modifications, continued unabated. In addition the objective blocking index developed by TM has been applied to the observed data to study the natural low frequency variability of blocking. The ability to simulate blocking of some climate models has also been tested

  7. Organelle acidification negatively regulates vacuole membrane fusion in vivo

    Science.gov (United States)

    Desfougères, Yann; Vavassori, Stefano; Rompf, Maria; Gerasimaite, Ruta; Mayer, Andreas

    2016-01-01

    The V-ATPase is a proton pump consisting of a membrane-integral V0 sector and a peripheral V1 sector, which carries the ATPase activity. In vitro studies of yeast vacuole fusion and evidence from worms, flies, zebrafish and mice suggested that V0 interacts with the SNARE machinery for membrane fusion, that it promotes the induction of hemifusion and that this activity requires physical presence of V0 rather than its proton pump activity. A recent in vivo study in yeast has challenged these interpretations, concluding that fusion required solely lumenal acidification but not the V0 sector itself. Here, we identify the reasons for this discrepancy and reconcile it. We find that acute pharmacological or physiological inhibition of V-ATPase pump activity de-acidifies the vacuole lumen in living yeast cells within minutes. Time-lapse microscopy revealed that de-acidification induces vacuole fusion rather than inhibiting it. Cells expressing mutated V0 subunits that maintain vacuolar acidity were blocked in this fusion. Thus, proton pump activity of the V-ATPase negatively regulates vacuole fusion in vivo. Vacuole fusion in vivo does, however, require physical presence of a fusion-competent V0 sector. PMID:27363625

  8. BCYCLIC: A parallel block tridiagonal matrix cyclic solver

    International Nuclear Information System (INIS)

    Research highlights: → A block tridiagonal matrix is factored with minimal fill-in using a parallel cyclic reduction algorithm. → Storage of the factored blocks allows the application of the inverse to multiple right-hand sides. → Dual scalability of the block solver is achieved with cyclic reduction for number of block rows and multithreaded routines (OpenMP, GotoBLAS) for block matrix manipulation. → Block solver efficiently handles arbitary (non-powers-of-2) block row and processor numbers. → Observed to execute at least one order of magnitude faster than general-purpose sparse matrix solvers. -- Abstract: A block tridiagonal matrix is factored with minimal fill-in using a cyclic reduction algorithm that is easily parallelized. Storage of the factored blocks allows the application of the inverse to multiple right-hand sides which may not be known at factorization time. Scalability with the number of block rows is achieved with cyclic reduction, while scalability with the block size is achieved using multithreaded routines (OpenMP, GotoBLAS) for block matrix manipulation. This dual scalability is a noteworthy feature of this new solver, as well as its ability to efficiently handle arbitrary (non-powers-of-2) block row and processor numbers. Comparison with a state-of-the art parallel sparse solver is presented. It is expected that this new solver will allow many physical applications to optimally use the parallel resources on current supercomputers. Example usage of the solver in magneto-hydrodynamic (MHD), three-dimensional equilibrium solvers for high-temperature fusion plasmas is cited.

  9. Fusion helps diversification

    NARCIS (Netherlands)

    S. Liang; Z. Ren; M. de Rijke

    2014-01-01

    A popular strategy for search result diversification is to first retrieve a set of documents utilizing a standard retrieval method and then rerank the results. We adopt a different perspective on the problem, based on data fusion. Starting from the hypothesis that data fusion can improve performance

  10. Controlled Nuclear Fusion.

    Science.gov (United States)

    Glasstone, Samuel

    This publication is one of a series of information booklets for the general public published by The United States Atomic Energy Commission. Among the topics discussed are: Importance of Fusion Energy; Conditions for Nuclear Fusion; Thermonuclear Reactions in Plasmas; Plasma Confinement by Magnetic Fields; Experiments With Plasmas; High-Temperature…

  11. Fusion product spectra

    International Nuclear Information System (INIS)

    Accurate fusion product data is required for most fusion plasma simulations. The energy broadening of reaction products is demonstrated to be more complicated than the usual Gaussian broadening. The accurate integrals are performed to obtain , , and for all binary reactions in the four- and five-nucleon systems. Reaction cross sections were developed using R-Matrix models that include most recent measurements

  12. Controlled thermonuclear fusion

    CERN Document Server

    Bobin, Jean Louis

    2014-01-01

    The book is a presentation of the basic principles and main achievements in the field of nuclear fusion. It encompasses both magnetic and inertial confinements plus a few exotic mechanisms for nuclear fusion. The state-of-the-art regarding thermonuclear reactions, hot plasmas, tokamaks, laser-driven compression and future reactors is given.

  13. Fusion reactor materials

    International Nuclear Information System (INIS)

    At the Belgian Nuclear Research Centre SCK-CEN, activities related to fusion focus on environmental tolerance of opto-electronic components. The objective of this program is to contribute to the knowledge on the behaviour, during and after neutron irradiation, of fusion-reactor materials and components. The main scientific activities for 1997 are summarized

  14. Nuclear fusion in Jupiter

    International Nuclear Information System (INIS)

    We study nuclear fusion occurring according to conventional wisdom in the planet Jupiter. In particular, we consider if in a standard evolutionary model of Jupiter a significant part of Jupiter's luminosity has been due to nuclear fusion at any time during its evolution. Nuclear rate equations in dense matter allowing for screening and pressure effects have been integrated in time

  15. FUSION03, Concluding Remarks

    OpenAIRE

    Balantekin, A. B.

    2004-01-01

    Fusion reactions below the Coulomb barrier provide new insights into multidimensional quantum tunneling, nuclear reaction dynamics and nuclear structure. These reactions are also of considerable interest to nuclear astrophysics. In this summary recent developments in the field are reviewed and open questions related to subbarrier fusion are presented.

  16. Two Horizons of Fusion

    Science.gov (United States)

    Lo, Mun Ling; Chik, Pakey Pui Man

    2016-01-01

    In this paper, we aim to differentiate the internal and external horizons of "fusion." "Fusion" in the internal horizon relates to the structure and meaning of the object of learning as experienced by the learner. It clarifies the interrelationships among an object's critical features and aspects. It also illuminates the…

  17. Thermal Resonance Fusion

    CERN Document Server

    Dong, Bao-Guo

    2015-01-01

    We first show a possible mechanism to create a new type of nuclear fusion, thermal resonance fusion, i.e. low energy nuclear fusion with thermal resonance of light nuclei or atoms, such as deuterium or tritium. The fusion of two light nuclei has to overcome the Coulomb barrier between these two nuclei to reach up to the interacting region of nuclear force. We found nuclear fusion could be realized with thermal vibrations of crystal lattice atoms coupling with light atoms at low energy by resonance to overcome this Coulomb barrier. Thermal resonances combining with tunnel effects can greatly enhance the probability of the deuterium fusion to the detectable level. Our low energy nuclear fusion mechanism research - thermal resonance fusion mechanism results demonstrate how these light nuclei or atoms, such as deuterium, can be fused in the crystal of metal, such as Ni or alloy, with synthetic thermal vibrations and resonances at different modes and energies experimentally. The probability of tunnel effect at dif...

  18. Magnetic fusion theory effort

    International Nuclear Information System (INIS)

    The present publication is a comprehensive listing of the magnetic fusion theory effort. It updates the last publication, ERDA 77-18, and gives data on the FY 1977 and FY 1978 budgets. There is a section devoted to the National Magnetic Fusion Computer Center

  19. Fusion of biological membranes

    Indian Academy of Sciences (India)

    K Katsov; M Müller; M Schick

    2005-06-01

    The process of membrane fusion has been examined by Monte Carlo simulation, and is found to be very different than the conventional picture. The differences in mechanism lead to several predictions, in particular that fusion is accompanied by transient leakage. This prediction has recently been verified. Self-consistent field theory is applied to examine the free energy barriers in the different scenarios.

  20. Fusion Power Deployment

    International Nuclear Information System (INIS)

    Fusion power plants could be part of a future portfolio of non-carbon dioxide producing energy supplies such as wind, solar, biomass, advanced fission power, and fossil energy with carbon dioxide sequestration. In this paper, we discuss key issues that could impact fusion energy deployment during the last half of this century. These include geographic issues such as resource availability, scale issues, energy storage requirements, and waste issues. The resource needs and waste production associated with fusion deployment in the U.S. should not pose serious problems. One important feature of fusion power is the fact that a fusion power plant should be locatable within most local or regional electrical distribution systems. For this reason, fusion power plants should not increase the burden of long distance power transmission to our distribution system. In contrast to fusion power, regional factors could play an important role in the deployment of renewable resources such as wind, solar and biomass or fossil energy with CO2 sequestration. We examine the role of these regional factors and their implications for fusion power deployment

  1. Fusion Canada issue 22

    International Nuclear Information System (INIS)

    A short bulletin from the National Fusion Program highlighting in this issue a bi-lateral meeting between Canada and Japan, water and hydrogen detritiation, in-situ tokamak surface analysis, an update of CCFM/TdeV and tritium accounting Industry guidance in Fusion, fast probe for plasma-surface interaction. 4 figs

  2. Magnetic Fusion Program Plan

    International Nuclear Information System (INIS)

    This Plan reflects the present conditions of the energy situation and is consistent with national priorities for the support of basic and applied research. It is realistic in taking advantage of the technical position that the United States has already established in fusion research to make cost-effective progress toward the development of fusion power as a future energy option

  3. Tight p-fusion frames

    OpenAIRE

    Bachoc, Christine; Ehler, Martin

    2012-01-01

    Fusion frames enable signal decompositions into weighted linear subspace components. For positive integers p, we introduce p-fusion frames, a sharpening of the notion of fusion frames. Tight p-fusion frames are closely related to the classical notions of designs and cubature formulas in Grassmann spaces and are analyzed with methods from harmonic analysis in the Grassmannians. We define the p-fusion frame potential, derive bounds for its value, and discuss the connections to tight p-fusion fr...

  4. Compact fusion reactors

    CERN Document Server

    CERN. Geneva

    2015-01-01

    Fusion research is currently to a large extent focused on tokamak (ITER) and inertial confinement (NIF) research. In addition to these large international or national efforts there are private companies performing fusion research using much smaller devices than ITER or NIF. The attempt to achieve fusion energy production through relatively small and compact devices compared to tokamaks decreases the costs and building time of the reactors and this has allowed some private companies to enter the field, like EMC2, General Fusion, Helion Energy, Lawrenceville Plasma Physics and Lockheed Martin. Some of these companies are trying to demonstrate net energy production within the next few years. If they are successful their next step is to attempt to commercialize their technology. In this presentation an overview of compact fusion reactor concepts is given.

  5. FUSION OF MEDICAL IMAGES

    Directory of Open Access Journals (Sweden)

    ALINE APARECIDA DE OLIVEIRA

    2013-08-01

    Full Text Available The use of image multiple modalities to achieve medical diagnosis has been commom practice lately. Nowadays the most used practice is medical image fusion, that is integrating information from several different methods within the same image. This paper aims at showing aplication and functionality of medical image fusion process such as Computed Tomography, Magnetic Resonance Imaging, Positron Emission Tomography and Doppler U.S. Image fusion process can be perfomed by pixel to pixel, region to region as well as based on decision taking. Free softwares can be found in the internet and images can be obtained either in separated or conneceted equipments. The choice of processes depends on several factors and the purpose of fusion as well as characteristics and conditions of each method should be taken into consideration. Currently equipment manufacturers are investing at improving the quality and detection capacity of images aiming at upgrading the fusion process which makes image interpretation more evident and trustworthy.

  6. Some fusion perspectives

    International Nuclear Information System (INIS)

    Some of the concepts of nuclear fusion reactions, advanced fusion fuels, environmental impacts, etc., are explored using the following general outline: I. Principles of Fusion (Nuclear Fuels and Reactions, Lawson Condition, n tau vs T, Nuclear Burn Characteristics); II. Magnetic Mirror Possibilities (the Ion Layer and Electron Layer, Exponential Build-up at MeV energies, Lorentz trapping at GeV energies); III. Pellet Fuel Fusion Prospects (Advanced Pellet Fuel Fusion Prospects, Burn Characteristics and Applications, Excitation-heating Prospects for Runaway Ion Temperatures). Inasmuch as the outline is very skeletal, a significant research and development effort may be in order to evaluate these prospects in more detail and hopefully ''harness the H-bomb'' for peaceful applications, the author concludes. 28 references

  7. Filter Bank Fusion Frames

    CERN Document Server

    Chebira, Amina; Mixon, Dustin G

    2010-01-01

    In this paper we characterize and construct novel oversampled filter banks implementing fusion frames. A fusion frame is a sequence of orthogonal projection operators whose sum can be inverted in a numerically stable way. When properly designed, fusion frames can provide redundant encodings of signals which are optimally robust against certain types of noise and erasures. However, up to this point, few implementable constructions of such frames were known; we show how to construct them using oversampled filter banks. In this work, we first provide polyphase domain characterizations of filter bank fusion frames. We then use these characterizations to construct filter bank fusion frame versions of discrete wavelet and Gabor transforms, emphasizing those specific finite impulse response filters whose frequency responses are well-behaved.

  8. Industry's role in inertial fusion

    International Nuclear Information System (INIS)

    This paper is an address to the Tenth Symposium on Fusion Engineering. The speaker first addressed the subject of industry's role in inertial fusion three years earlier in 1980, outlining programs that included participation in the Shiva construction project, and the industrial participants' program set up in the laser fusion program to bring industrial scientists and engineers into the laboratory to work on laser fusion. The speaker is now the president of KMS Fusion, Inc., the primary industrial participant in the inertial fusion program. The outlook for fusion energy and the attitude of the federal government toward the fusion program is discussed

  9. Autophagy contributes to regulation of nuclear dynamics during vegetative growth and hyphal fusion in Fusarium oxysporum.

    Science.gov (United States)

    Corral-Ramos, Cristina; Roca, M Gabriela; Di Pietro, Antonio; Roncero, M Isabel G; Ruiz-Roldán, Carmen

    2015-01-01

    In the fungal pathogen Fusarium oxysporum, vegetative hyphal fusion triggers nuclear mitotic division in the invading hypha followed by migration of a nucleus into the receptor hypha and degradation of the resident nucleus. Here we examined the role of autophagy in fusion-induced nuclear degradation. A search of the F. oxysporum genome database for autophagy pathway components identified putative orthologs of 16 core autophagy-related (ATG) genes in yeast, including the ubiquitin-like protein Atg8, which is required for the formation of autophagosomal membranes. F. oxysporum Foatg8Δ mutants were generated in a strain harboring H1-cherry fluorescent protein (ChFP)-labeled nuclei to facilitate analysis of nuclear dynamics. The Foatg8Δ mutants did not show MDC-positive staining in contrast to the wild type and the FoATG8-complemented (cFoATG8) strain, suggesting that FoAtg8 is required for autophagy in F. oxysporum. The Foatg8Δ strains displayed reduced rates of hyphal growth, conidiation, and fusion, and were significantly attenuated in virulence on tomato plants and in the nonvertebrate animal host Galleria mellonella. In contrast to wild-type hyphae, which are almost exclusively composed of uninucleated hyphal compartments, the hyphae of the Foatg8Δ mutants contained a significant fraction of hyphal compartments with 2 or more nuclei. The increase in the number of nuclei per hyphal compartment was particularly evident after hyphal fusion events. Time-lapse microscopy analyses revealed abnormal mitotic patterns during vegetative growth in the Foatg8Δ mutants. Our results suggest that autophagy mediates nuclear degradation after hyphal fusion and has a general function in the control of nuclear distribution in F. oxysporum.

  10. Block copolymer battery separator

    Energy Technology Data Exchange (ETDEWEB)

    Wong, David; Balsara, Nitash Pervez

    2016-04-26

    The invention herein described is the use of a block copolymer/homopolymer blend for creating nanoporous materials for transport applications. Specifically, this is demonstrated by using the block copolymer poly(styrene-block-ethylene-block-styrene) (SES) and blending it with homopolymer polystyrene (PS). After blending the polymers, a film is cast, and the film is submerged in tetrahydrofuran, which removes the PS. This creates a nanoporous polymer film, whereby the holes are lined with PS. Control of morphology of the system is achieved by manipulating the amount of PS added and the relative size of the PS added. The porous nature of these films was demonstrated by measuring the ionic conductivity in a traditional battery electrolyte, 1M LiPF.sub.6 in EC/DEC (1:1 v/v) using AC impedance spectroscopy and comparing these results to commercially available battery separators.

  11. Blocking in Category Learning

    OpenAIRE

    Bott, Lewis; Hoffman, Aaron B.; Murphy, Gregory L.

    2007-01-01

    Many theories of category learning assume that learning is driven by a need to minimize classification error. When there is no classification error, therefore, learning of individual features should be negligible. We tested this hypothesis by conducting three category learning experiments adapted from an associative learning blocking paradigm. Contrary to an error-driven account of learning, participants learned a wide range of information when they learned about categories, and blocking effe...

  12. Fusion Studies in Japan

    Science.gov (United States)

    Ogawa, Yuichi

    2016-05-01

    A new strategic energy plan decided by the Japanese Cabinet in 2014 strongly supports the steady promotion of nuclear fusion development activities, including the ITER project and the Broader Approach activities from the long-term viewpoint. Atomic Energy Commission (AEC) in Japan formulated the Third Phase Basic Program so as to promote an experimental fusion reactor project. In 2005 AEC has reviewed this Program, and discussed on selection and concentration among many projects of fusion reactor development. In addition to the promotion of ITER project, advanced tokamak research by JT-60SA, helical plasma experiment by LHD, FIREX project in laser fusion research and fusion engineering by IFMIF were highly prioritized. Although the basic concept is quite different between tokamak, helical and laser fusion researches, there exist a lot of common features such as plasma physics on 3-D magnetic geometry, high power heat load on plasma facing component and so on. Therefore, a synergetic scenario on fusion reactor development among various plasma confinement concepts would be important.

  13. Growing Up with Their Blocks.

    Science.gov (United States)

    Winarski, Diana L.

    1995-01-01

    Describes one teacher's use of traditional wooden blocks in fifth-grade curriculum. Notes that use of blocks can teach communication, teamwork, precision, and arithmetic concepts. Also describes four easy classroom block projects. (TM)

  14. Fusion research in Hungary

    International Nuclear Information System (INIS)

    Hungarian fusion research started in the 1970s, when the idea of installing a small tokamak experiment emerged. In return to computer equipment a soviet tokamak was indeed sent to Hungary and started to operate as MT-1 at the Central Research Institute for Physics (KFKI) in 1979. Major research topics included diagnostic development, edge plasma studies and investigation of disruptions. Following a major upgrade in 1992 (new vacuum vessel, active position control and PC network based data acquisition system) the MT-1M tokamak was used for the study of transport processes with trace impurity injection, micropellet ablation studies, X-ray tomography and laser blow-off diagnostic development. Although funding ceased in the middle of the 90's the group was held alive by collaborations with EU fusion labs: FZ -Juelich, IPP-Garching and CRPP-EPFL Lausanne. In 1998 the machine was dismantled due to reorganization of the Hungarian Academy of Sciences. New horizons opened to fusion research from 1999, when Hungary joined EURATOM and a fusion Association was formed. Since then fusion physics studies are done in collaboration with major EU fusion laboratories, Hungarian researchers also play an active role in JET diagnostics upgrade and ITER design. Major topics are pellet ablation studies, plasma turbulence diagnosis using Beam Emission Spectroscopy and other techniques, tomography and plasma diagnostics using various neutral beams. In fusion relevant technology R and D Hungary has less records. Before joining EURATOM some materials irradiation studies were done at the Budapest Research Reactor at KFKI-AEKI. The present day fusion technology programme focuses still on irradiation studies, nuclear material database and electromagnetic testing techniques. Increasing the fusion technology research activities is a difficult task, as the competition in Hungarian industry is very strong and the interest of organizations in long-term investments into R and D is rather weak and

  15. Control of Fusion and Solubility in Fusion Systems

    CERN Document Server

    Craven, David A

    2009-01-01

    In this article, we consider the control of fusion in fusion systems, proving three previously known, non-trivial results in a new, largely elementary way. We then reprove a result of Aschbacher, that the product of two strongly closed subgroups is strongly closed; to do this, we consolidate the theory of quotients of fusion systems into a consistent theory. We move on considering p-soluble fusion systems, and prove that they are constrained, allowing us to effectively characterize fusion systems of p-soluble groups. This leads us to recast Thompson Factorization for Qd(p)-free fusion systems, and consider Thompson Factorization for more general fusion systems.

  16. Remote sensing image fusion

    CERN Document Server

    Alparone, Luciano; Baronti, Stefano; Garzelli, Andrea

    2015-01-01

    A synthesis of more than ten years of experience, Remote Sensing Image Fusion covers methods specifically designed for remote sensing imagery. The authors supply a comprehensive classification system and rigorous mathematical description of advanced and state-of-the-art methods for pansharpening of multispectral images, fusion of hyperspectral and panchromatic images, and fusion of data from heterogeneous sensors such as optical and synthetic aperture radar (SAR) images and integration of thermal and visible/near-infrared images. They also explore new trends of signal/image processing, such as

  17. Fusion facility siting considerations

    Energy Technology Data Exchange (ETDEWEB)

    Bussell, G.T.

    1985-07-01

    Inherent in the fusion program's transition from hydrogen devices to commercial power machines is a general increase in the size and scope of succeeding projects. This growth will lead to increased emphasis on safety, environmental impact, and the external effects of fusion in general, and of each new device in particular. A critically important consideration in this regard is site selection. The purpose of this paper is to examine major siting issues that may affect the economics, safety, and environmental impact of fusion.

  18. Fusion facility siting considerations

    Energy Technology Data Exchange (ETDEWEB)

    Bussell, G.T.

    1985-01-01

    Inherent in the fusion program's transition from hydrogen devices to commercial power machines is a general increase in the size and scope of succeeding projects. This growth will lead to increased emphasis on safety, environmental impact, and the external effects of fusion in general, and of each new device in particular. A critically important consideration in this regard is site selection. The purpose of this paper is to examine major siting issues that may affect the economics, safety, and environmental impact of fusion.

  19. Adhesion and Fusion of Muscle Cells Are Promoted by Filopodia.

    Science.gov (United States)

    Segal, Dagan; Dhanyasi, Nagaraju; Schejter, Eyal D; Shilo, Ben-Zion

    2016-08-01

    Indirect flight muscles (IFMs) in Drosophila are generated during pupariation by fusion of hundreds of myoblasts with larval muscle templates (myotubes). Live observation of these muscles during the fusion process revealed multiple long actin-based protrusions that emanate from the myotube surface and require Enabled and IRSp53 for their generation and maintenance. Fusion is blocked when formation of these filopodia is compromised. While filopodia are not required for the signaling process underlying critical myoblast cell-fate changes prior to fusion, myotube-myoblast adhesion appears to be filopodia dependent. Without filopodia, close apposition between the cell membranes is not achieved, the cell-adhesion molecule Duf is not recruited to the myotube surface, and adhesion-dependent actin foci do not form. We therefore propose that the filopodia are necessary to prime the heterotypic adhesion process between the two cell types, possibly by recruiting the cell-adhesion molecule Sns to discrete patches on the myoblast cell surface.

  20. Herpesvirus glycoproteins undergo multiple antigenic changes before membrane fusion.

    Directory of Open Access Journals (Sweden)

    Daniel L Glauser

    Full Text Available Herpesvirus entry is a complicated process involving multiple virion glycoproteins and culminating in membrane fusion. Glycoprotein conformation changes are likely to play key roles. Studies of recombinant glycoproteins have revealed some structural features of the virion fusion machinery. However, how the virion glycoproteins change during infection remains unclear. Here using conformation-specific monoclonal antibodies we show in situ that each component of the Murid Herpesvirus-4 (MuHV-4 entry machinery--gB, gH/gL and gp150--changes in antigenicity before tegument protein release begins. Further changes then occurred upon actual membrane fusion. Thus virions revealed their final fusogenic form only in late endosomes. The substantial antigenic differences between this form and that of extracellular virions suggested that antibodies have only a limited opportunity to block virion membrane fusion.

  1. Protons energy loss for laser fusion driven ion acceleration

    International Nuclear Information System (INIS)

    Complete text of publication follows. The anomalous generation of plasma blocks by interaction of petawatt-picosecond laser pulses permits side-on ignition of uncompressed solid fusion fuel following an improved application of the hydrodynamic Chu-model for deuterium-tritium. The new possibility of side-on laser ignition depends on accelerated ions and produced ions beams of high energy particles by the nonlinear ponderomotive force of the laser pulse in the plasma block, a re-evolution of the early hydrodynamic analysis for ignition of inertial fusion by including inhibition factor, collective effect of stopping power of alpha particles and the energy loss rate reabsorb to plasma by the protons of plasma block being reduced by about a factor 40.

  2. On Exotic Saturated Fusion Systems

    Institute of Scientific and Technical Information of China (English)

    Jun LIAO

    2016-01-01

    In this paper, we prove that a product F1 × F2 of saturated fusion systems is exotic if and only if at least one of the factors is exotic. This result provides a method to construct new exotic fusion systems by known exotic fusion systems. We also investigate central products of saturated fusion systems.

  3. Fusion Systems for Profinite Groups

    OpenAIRE

    Stancu, Radu; Symonds, Peter

    2012-01-01

    We introduce the notion of a pro-fusion system on a pro-p group, which generalizes the notion of a fusion system on a finite p-group. We also prove a version of Alperin's Fusion Theorem for pro-fusion systems.

  4. Fusion technology programme

    International Nuclear Information System (INIS)

    KfK participates to the Fusion Technology Programme of the European Community. Most of the work in progress addresses the Next European Torus (NET) and the long term technology aspects as defined in the 82/86 programme. A minor part serves to preparation of future contributions and to design studies on fusion concepts in a wider perspective. The Fusion Technology Programme of Euratom covers mainly aspects of nuclear engineering. Plasma engineering, heating, refueling and vacuum technology are at present part of the Physics Programme. In view of NET, integration of the different areas of work will be mandatory. KfK is therefore prepared to address technical aspects beyond the actual scope of the physics experiments. The technology tasks are reported project wise under title and code of the Euratom programme. Most of the projects described here are shared with other European fusion laboratories as indicated in the table annexed to this report. (orig./GG)

  5. Cell fusions in mammals

    DEFF Research Database (Denmark)

    Larsson, Lars-Inge; Bjerregaard, Bolette; Talts, Jan Fredrik

    2008-01-01

    Cell fusions are important to fertilization, placentation, development of skeletal muscle and bone, calcium homeostasis and the immune defense system. Additionally, cell fusions participate in tissue repair and may be important to cancer development and progression. A large number of factors appear...... to regulate cell fusions, including receptors and ligands, membrane domain organizing proteins, proteases, signaling molecules and fusogenic proteins forming alpha-helical bundles that bring membranes close together. The syncytin family of proteins represent true fusogens and the founding member, syncytin-1......, has been documented to be involved in fusions between placental trophoblasts, between cancer cells and between cancer cells and host ells. We review the literature with emphasis on the syncytin family and propose that syncytins may represent universal fusogens in primates and rodents, which work...

  6. Label Fusion Strategy Selection

    Directory of Open Access Journals (Sweden)

    Nicolas Robitaille

    2012-01-01

    Full Text Available Label fusion is used in medical image segmentation to combine several different labels of the same entity into a single discrete label, potentially more accurate, with respect to the exact, sought segmentation, than the best input element. Using simulated data, we compared three existing label fusion techniques—STAPLE, Voting, and Shape-Based Averaging (SBA—and observed that none could be considered superior depending on the dissimilarity between the input elements. We thus developed an empirical, hybrid technique called SVS, which selects the most appropriate technique to apply based on this dissimilarity. We evaluated the label fusion strategies on two- and three-dimensional simulated data and showed that SVS is superior to any of the three existing methods examined. On real data, we used SVS to perform fusions of 10 segmentations of the hippocampus and amygdala in 78 subjects from the ICBM dataset. SVS selected SBA in almost all cases, which was the most appropriate method overall.

  7. Cold nuclear fusion

    Directory of Open Access Journals (Sweden)

    Huang Zhenqiang Huang Yuxiang

    2013-10-01

    Full Text Available In normal temperature condition, the nuclear force constraint inertial guidance method, realize the combination of deuterium and tritium, helium and lithium... And with a magnetic moment of light nuclei controlled cold nuclear collide fusion, belongs to the nuclear energy research and development in the field of applied technology "cold nuclear collide fusion". According to the similarity of the nuclear force constraint inertial guidance system, the different velocity and energy of the ion beam mixing control, developed ion speed dc transformer, it is cold nuclear fusion collide, issue of motivation and the nuclear power plant start-up fusion and power transfer system of the important equipment, so the merger to apply for a patent

  8. Optical Fiber Fusion Splicing

    CERN Document Server

    Yablon, Andrew D

    2005-01-01

    This book is an up-to-date treatment of optical fiber fusion splicing incorporating all the recent innovations in the field. It provides a toolbox of general strategies and specific techniques that the reader can apply when optimizing fusion splices between novel fibers. It specifically addresses considerations important for fusion splicing of contemporary specialty fibers including dispersion compensating fiber, erbium-doped gain fiber, polarization maintaining fiber, and microstructured fiber. Finally, it discusses the future of optical fiber fusion splicing including silica and non-silica based optical fibers as well as the trend toward increasing automation. Whilst serving as a self-contained reference work, abundant citations from the technical literature will enable readers to readily locate primary sources.

  9. Fusion Revisits CERN

    CERN Multimedia

    2001-01-01

    It's going to be a hot summer at CERN. At least in the Main Building, where from 13 July to 20 August an exhibition is being hosted on nuclear fusion, the energy of the Stars. Nuclear fusion is the engine driving the stars but also a potential source of energy for mankind. The exhibition shows the different nuclear fusion techniques and research carried out on the subject in Europe. Inaugurated at CERN in 1993, following collaboration between Lausanne's CRPP-EPFL and CERN, with input from Alessandro Pascolini of Italy's INFN, this exhibition has travelled round Europe before being revamped and returning to CERN. 'Fusion, Energy of the Stars', from 13 July onwards, Main Building

  10. Fusion plasma physics

    CERN Document Server

    Stacey, Weston M

    2012-01-01

    This revised and enlarged second edition of the popular textbook and reference contains comprehensive treatments of both the established foundations of magnetic fusion plasma physics and of the newly developing areas of active research. It concludes with a look ahead to fusion power reactors of the future. The well-established topics of fusion plasma physics -- basic plasma phenomena, Coulomb scattering, drifts of charged particles in magnetic and electric fields, plasma confinement by magnetic fields, kinetic and fluid collective plasma theories, plasma equilibria and flux surface geometry, plasma waves and instabilities, classical and neoclassical transport, plasma-materials interactions, radiation, etc. -- are fully developed from first principles through to the computational models employed in modern plasma physics. The new and emerging topics of fusion plasma physics research -- fluctuation-driven plasma transport and gyrokinetic/gyrofluid computational methodology, the physics of the divertor, neutral ...

  11. Fusion technology development

    International Nuclear Information System (INIS)

    This report includes information on the following chapters: (1) conceptual design studies, (2) magnetics, (3) plasma heating, fueling, and exhaust, (4) materials for fusion reactors, (5) alternate applications, and (6) environment and safety

  12. Fusion reactor materials

    International Nuclear Information System (INIS)

    This is the fifteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; Special purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the U.S. Department of Energy. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

  13. Fusion technology (FT)

    International Nuclear Information System (INIS)

    The annual report of tha fusion technology (FT) working group discusses the projects carried out by the participating institutes in the fields of 1) fuel injection and plasma heating, 2) magnetic field technology, and 3) systems investigations. (HK)

  14. Block diagonal and schur complement preconditioners for block-toeplitz systems with small size blocks

    OpenAIRE

    Ching, WK; Ng, MK; Wen, YW

    2007-01-01

    In this paper we consider the solution of Hermitian positive definite block-Toeplitz systems with small size blocks. We propose and study block diagonal and Schur complement preconditioners for such block-Toeplitz matrices. We show that for some block-Toeplitz matrices, the spectra of the preconditioned matrices are uniformly bounded except for a fixed number of outliers where this fixed number depends only on the size of the block. Hence, conjugate gradient type methods, when applied to solv...

  15. Fusion research in India

    International Nuclear Information System (INIS)

    The economic growth of our country demands a rapid increase in the energy output. Fusion is one such alternate clean source of energy to contribute in the energy mix towards the second half of the century, with a virtually inexhaustible fuel supply. The environmental impact of fusion would be acceptable and relatively safe. These advantages have driven the world fusion research programme since its inception. Till a pure fusion energy source is available, it is worthwhile to develop it for the benefit of conventional fission fuel preparation and other various usages. Indian National Fusion Programme was initiated by indigenously developing the first Indian Tokamak, ADITYA, successfully commissioned in 1989 and has been generating interesting scientific results on various topics. The next major program at Institute for Plasma Research (IPR) has been to construct a Steady State Superconducting Tokamak (SST-1) by mix of import and indigenous development. After successful engineering validation of the subsystems in integrated operations, successful machine operation has been continued. Since then, the machine has been upgraded with a graphite first wall. As a strategy towards leapfrogging to save time, IPR and Department of Atomic Energy (DAE) decided on India’s participation in the International Thermonuclear Experimental Reactor (ITER) as a full partner, unique features of which will be its ability to operate for long durations and at power levels ∼500 MW sufficient to demonstrate the physics of burning plasma in a power plant like environment. It will also serve as a test-bed for additional fusion power plant technologies. To accelerate the domestic fusion research programme with integration of knowledge gained from ITER, we would embark upon design of a smaller fusion machine which will use already available technologies to produce controlled fusion reactions and use it as an energetic neutron source for test of materials developed for future fusion reactors

  16. Right bundle branch block

    DEFF Research Database (Denmark)

    Bussink, Barbara E; Holst, Anders Gaarsdal; Jespersen, Lasse;

    2013-01-01

    AimsTo determine the prevalence, predictors of newly acquired, and the prognostic value of right bundle branch block (RBBB) and incomplete RBBB (IRBBB) on a resting 12-lead electrocardiogram in men and women from the general population.Methods and resultsWe followed 18 441 participants included.......5%/2.3% in women, P Right bundle branch block was associated with significantly...... increased all-cause and cardiovascular mortality in both genders with age-adjusted hazard ratios (HR) of 1.31 [95% confidence interval (CI), 1.11-1.54] and 1.87 (95% CI, 1.48-2.36) in the gender pooled analysis with little attenuation after multiple adjustment. Right bundle branch block was associated...

  17. Economically competitive fusion

    Directory of Open Access Journals (Sweden)

    David J. Ward

    2008-12-01

    Full Text Available Not since the oil crisis of the 1970s has the perception that energy is a crucial and precious resource been as strong as it is today. The need for a new approach to world energy supply, driven by concerns over resources, pollution, and security, is leading to a reappraisal of fusion. Fusion has enormous potential and major safety and environmental advantages, and hence could make a large difference to energy supplies.

  18. Cold nuclear fusion

    OpenAIRE

    Huang Zhenqiang Huang Yuxiang

    2013-01-01

    In normal temperature condition, the nuclear force constraint inertial guidance method, realize the combination of deuterium and tritium, helium and lithium... And with a magnetic moment of light nuclei controlled cold nuclear collide fusion, belongs to the nuclear energy research and development in the field of applied technology "cold nuclear collide fusion". According to the similarity of the nuclear force constraint inertial guidance system, the different velocity and energy of the ion be...

  19. Fusion Simulation Program

    International Nuclear Information System (INIS)

    Many others in the fusion energy and advanced scientific computing communities participated in the development of this plan. The core planning team is grateful for their important contributions. This summary is meant as a quick overview the Fusion Simulation Program's (FSP's) purpose and intentions. There are several additional documents referenced within this one and all are supplemental or flow down from this Program Plan. The overall science goal of the DOE Office of Fusion Energy Sciences (FES) Fusion Simulation Program (FSP) is to develop predictive simulation capability for magnetically confined fusion plasmas at an unprecedented level of integration and fidelity. This will directly support and enable effective U.S. participation in International Thermonuclear Experimental Reactor (ITER) research and the overall mission of delivering practical fusion energy. The FSP will address a rich set of scientific issues together with experimental programs, producing validated integrated physics results. This is very well aligned with the mission of the ITER Organization to coordinate with its members the integrated modeling and control of fusion plasmas, including benchmarking and validation activities. (1). Initial FSP research will focus on two critical Integrated Science Application (ISA) areas: ISA1, the plasma edge; and ISA2, whole device modeling (WDM) including disruption avoidance. The first of these problems involves the narrow plasma boundary layer and its complex interactions with the plasma core and the surrounding material wall. The second requires development of a computationally tractable, but comprehensive model that describes all equilibrium and dynamic processes at a sufficient level of detail to provide useful prediction of the temporal evolution of fusion plasma experiments. The initial driver for the whole device model will be prediction and avoidance of discharge-terminating disruptions, especially at high performance, which are a critical

  20. Economically competitive fusion

    OpenAIRE

    Ward, David J.; Dudarev, Sergei L.

    2008-01-01

    Not since the oil crisis of the 1970s has the perception that energy is a crucial and precious resource been as strong as it is today. The need for a new approach to world energy supply, driven by concerns over resources, pollution, and security, is leading to a reappraisal of fusion. Fusion has enormous potential and major safety and environmental advantages, and hence could make a large difference to energy supplies.

  1. Conference on Norwegian fusion research

    International Nuclear Information System (INIS)

    The question of instituting a systematic research programme in Norway on aspects of thermonuclear and plasma physics has been raised. The conference here reported was intended to provide basic information on the status of fusion research internationally and to discuss a possible Norwegian programme. The main contributions covered the present status of fusion research, international cooperation, fusion research in small countries and minor laboratories, fusion research in Denmark and Sweden, and a proposed fusion experiment in Bergen. (JIW)

  2. Bactericidal block copolymer micelles.

    Science.gov (United States)

    Vyhnalkova, Renata; Eisenberg, Adi; van de Ven, Theo

    2011-05-12

    Block copolymer micelles with bactericidal properties were designed to deactivate pathogens such as E. coli bacteria. The micelles of PS-b-PAA and PS-b-P4VP block copolymers were loaded with biocides TCMTB or TCN up to 20 or 30 wt.-%, depending on the type of antibacterial agent. Bacteria were exposed to loaded micelles and bacterial deactivation was evaluated. The micelles loaded with TCN are bactericidal; bacteria are killed in less than two minutes of exposure. The most likely interpretation of the data is that the biocide is transferred to the bacteria by repeated micelle/bacteria contacts, and not via the solution. PMID:21275041

  3. Perspectives of fusion power

    International Nuclear Information System (INIS)

    New and practically inexhaustible sources of energy must be developed for the period when oil, coal and uranium will become scarce and expensive. Nuclear fusion holds great promise as one of these practically inexhaustible energy sources. Based on the deuteriumtritium reaction with tritium obtained from naturally occuring lithium, which is also widely available in Europe, the accessible energy resources in the world are 3.1012 to 3.1016 toe; based on the deuterium-deuterium reaction, the deuterium content of the oceans corresponds to 1020 toe. It is presently envisaged that in order to establish fusion as a large-scale energy source, three major thresholds must be reached: - Scientific feasibility, - Technical feasibility, i.e. the proof that the basic technical problems of the fusion reactor can be solved. - Commercial feasibility, i.e. proof that fusion power reactors can be built on an industrial scale, can be operated reliably and produce usable energy at prices competitive with other energy sources. From the above it is clear that the route to commercial fusion will be long and costly and involve the solution of extremely difficult technical problems. In view of the many steps which have to be taken, it appears unlikely that commercial fusion power will be in general use within the next 50 years and by that time world-wide expenditure on research, development and demonstration may well have exceeded 100 Bio ECU. (author)

  4. Energy from inertial fusion

    International Nuclear Information System (INIS)

    This book contains 22 articles on inertial fusion energy (IFE) research and development written in the framework of an international collaboration of authors under the guidance of an advisory group on inertial fusion energy set up in 1991 to advise the IAEA. It describes the actual scientific, engineering and technological developments in the field of inertial confinement fusion (ICF). It also identifies ways in which international co-operation in ICF could be stimulated. The book is intended for a large audience and provides an introduction to inertial fusion energy and an overview of the various technologies needed for IFE power plants to be developed. It contains chapters on (i) the fundamentals of IFE; (ii) inertial confinement target physics; (iii) IFE power plant design principles (requirements for power plant drivers, solid state laser drivers, gas laser drivers, heavy ion drivers, and light ion drivers, target fabrication and positioning, reaction chamber systems, power generation and conditioning and radiation control, materials management and target materials recovery), (iv) special design issues (radiation damage in structural materials, induced radioactivity, laser driver- reaction chamber interfaces, ion beam driver-reaction chamber interfaces), (v) inertial fusion energy development strategy, (vi) safety and environmental impact, (vii) economics and other figures of merit; (viii) other uses of inertial fusion (both those involving and not involving implosions); and (ix) international activities. Refs, figs and tabs

  5. The VariLift® Interbody Fusion System: expandable, standalone interbody fusion

    Directory of Open Access Journals (Sweden)

    Emstad E

    2015-05-01

    Full Text Available Erik Emstad,1 Diana Cardenas del Monaco,1 Louis C Fielding,2 Jon E Block2 1Wenzel Spine, Inc., Austin, TX, 2The Jon Block Group, San Francisco, CA, USA Abstract: Intervertebral fusion cages have been in clinical use since the 1990s. Cages offer the benefits of bone graft containment, restored intervertebral and foraminal height, and a more repeatable, stable procedure compared to interbody fusion with graft material alone. Due to concerns regarding postoperative stability, loss of lordosis, and subsidence or migration of the implant, interbody cages are commonly used with supplemental fixation such as pedicle screw systems or anterior plates. While providing additional stability, supplemental fixation techniques increase operative time, exposure, cost, and morbidity. The VariLift® Interbody Fusion System (VariLift® system has been developed as a standalone solution to provide the benefits of intervertebral fusion cages without the requirement of supplemental fixation. The VariLift® system, FDA-cleared for standalone use in both the cervical and lumbar spine, is implanted in a minimal profile and then expanded in situ to provide segmental stability, restored lordosis, and a large graft chamber. Preclinical testing and analyses have found that the VariLift® System is durable, and reduces stresses that may contribute to subsidence and migration of other standalone interbody cages. Fifteen years of clinical development with the VariLift® system have demonstrated positive clinical outcomes, continued patient maintenance of segmental stability and lordosis, and no evidence of implant migration. The purpose of this report is to describe the VariLift® system, including implant characteristics, principles of operation, indications for use, patient selection criteria, surgical technique, postoperative care, preclinical testing, and clinical experience. The VariLift® System represents an improved surgical option for a stable interbody fusion without

  6. E-Block: A Tangible Programming Tool with Graphical Blocks

    OpenAIRE

    Danli Wang; Yang Zhang; Shengyong Chen

    2013-01-01

    This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transfer...

  7. Development of Radiation Fusion Biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Sung Kee; Lee, Ju Woon; Park, Sang Hyun

    2010-04-15

    {center_dot} Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E-beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready-to-eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. {center_dot} Development of modulators against degenerative aging using radiation fusion technology - Confirmation of similarity of radiation-induced aging and normal aging by comparative analysis study - Selection of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling - Validation of biomarkers and models using substances {center_dot} Development of biochips and kits using RI detection technology for life science - Establishment of kinase-substrate interaction analysis using RI detection technique (More than 30 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non-specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing

  8. A Place for Block Play.

    Science.gov (United States)

    Moore, Gary T.

    1997-01-01

    Discusses the importance of block play--including its contributions to perceptual, fine motor, and cognitive development--and components of a good preschool block play area. Recommends unit blocks complemented by stacking blocks, toys, beads, cubes, and Brio wooden toys. Makes recommendations for space, size, locations and connections to other…

  9. Effects of Block Scheduling

    Directory of Open Access Journals (Sweden)

    William R. Veal

    1999-09-01

    Full Text Available This study examined the effects of a tri-schedule on the academic achievement of students in a high school. The tri-schedule consists of traditional, 4x4 block, and hybrid schedules running at the same time in the same high school. Effectiveness of the schedules was determined from the state mandated test of basic skills in reading, language, and mathematics. Students who were in a particular schedule their freshman year were tested at the beginning of their sophomore year. A statistical ANCOVA test was performed using the schedule types as independent variables and cognitive skill index and GPA as covariates. For reading and language, there was no statistically significant difference in test results. There was a statistical difference mathematics-computation. Block mathematics is an ideal format for obtaining more credits in mathematics, but the block format does little for mathematics achievement and conceptual understanding. The results have content specific implications for schools, administrations, and school boards who are considering block scheduling adoption.

  10. Spice Blocks Melanoma Growth

    Science.gov (United States)

    Science Teacher, 2005

    2005-01-01

    Curcumin, the pungent yellow spice found in both turmeric and curry powders, blocks a key biological pathway needed for development of melanoma and other cancers, according to a study that appears in the journal Cancer. Researchers from The University of Texas M. D. Anderson Cancer Center demonstrate how curcumin stops laboratory strains of…

  11. Contaminated soil concrete blocks

    NARCIS (Netherlands)

    Korte, de A.C.J.; Brouwers, H.J.H.; Limbachiya, Mukesh C.; Kew, Hsein Y.

    2009-01-01

    According to Dutch law the contaminated soil needs to be remediated or immobilised. The main focus in this article is the design of concrete blocks, containing contaminated soil, that are suitable for large production, financial feasible and meets all technical and environmental requirements. In ord

  12. Advanced fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Tomita, Yukihiro [National Inst. for Fusion Science, Toki, Gifu (Japan)

    2003-04-01

    The main subjects on fusion research are now on D-T fueled fusion, mainly due to its high fusion reaction rate. However, many issues are still remained on the wall loading by the 14 MeV neutrons. In the case of D-D fueled fusion, the neutron wall loading is still remained, though the technology related to tritium breeding is not needed. The p-{sup 6}Li and p-{sup 11}B fueled fusions are not estimated to be the next generation candidate until the innovated plasma confinement technologies come in useful to achieve the high performance plasma parameters. The fusion reactor of D-{sup 3}He fuels has merits on the smaller neutron wall loading and tritium handling. However, there are difficulties on achieving the high temperature plasma more than 100 keV. Furthermore the high beta plasma is needed to decrease synchrotron radiation loss. In addition, the efficiency of the direct energy conversion from protons coming out from fusion reaction is one of the key parameters in keeping overall power balance. Therefore, open magnetic filed lines should surround the plasma column. In this paper, we outlined the design of the commercial base reactor (ARTEMIS) of 1 GW electric output power configured by D-{sup 3}He fueled FRC (Field Reversed Configuration). The ARTEMIS needs 64 kg of {sup 3}He per a year. On the other hand, 1 million tons of {sup 3}He is estimated to be in the moon. The {sup 3}He of about 10{sup 23} kg are to exist in gaseous planets such as Jupiter and Saturn. (Y. Tanaka)

  13. Inhibition of the Hantavirus Fusion Process by Predicted Domain III and Stem Peptides from Glycoprotein Gc.

    Science.gov (United States)

    Barriga, Gonzalo P; Villalón-Letelier, Fernando; Márquez, Chantal L; Bignon, Eduardo A; Acuña, Rodrigo; Ross, Breyan H; Monasterio, Octavio; Mardones, Gonzalo A; Vidal, Simon E; Tischler, Nicole D

    2016-07-01

    Hantaviruses can cause hantavirus pulmonary syndrome or hemorrhagic fever with renal syndrome in humans. To enter cells, hantaviruses fuse their envelope membrane with host cell membranes. Previously, we have shown that the Gc envelope glycoprotein is the viral fusion protein sharing characteristics with class II fusion proteins. The ectodomain of class II fusion proteins is composed of three domains connected by a stem region to a transmembrane anchor in the viral envelope. These fusion proteins can be inhibited through exogenous fusion protein fragments spanning domain III (DIII) and the stem region. Such fragments are thought to interact with the core of the fusion protein trimer during the transition from its pre-fusion to its post-fusion conformation. Based on our previous homology model structure for Gc from Andes hantavirus (ANDV), here we predicted and generated recombinant DIII and stem peptides to test whether these fragments inhibit hantavirus membrane fusion and cell entry. Recombinant ANDV DIII was soluble, presented disulfide bridges and beta-sheet secondary structure, supporting the in silico model. Using DIII and the C-terminal part of the stem region, the infection of cells by ANDV was blocked up to 60% when fusion of ANDV occurred within the endosomal route, and up to 95% when fusion occurred with the plasma membrane. Furthermore, the fragments impaired ANDV glycoprotein-mediated cell-cell fusion, and cross-inhibited the fusion mediated by the glycoproteins from Puumala virus (PUUV). The Gc fragments interfered in ANDV cell entry by preventing membrane hemifusion and pore formation, retaining Gc in a non-resistant homotrimer stage, as described for DIII and stem peptide inhibitors of class II fusion proteins. Collectively, our results demonstrate that hantavirus Gc shares not only structural, but also mechanistic similarity with class II viral fusion proteins, and will hopefully help in developing novel therapeutic strategies against hantaviruses

  14. Inhibition of the Hantavirus Fusion Process by Predicted Domain III and Stem Peptides from Glycoprotein Gc

    Science.gov (United States)

    Barriga, Gonzalo P.; Villalón-Letelier, Fernando; Márquez, Chantal L.; Bignon, Eduardo A.; Acuña, Rodrigo; Ross, Breyan H.; Monasterio, Octavio; Mardones, Gonzalo A.; Vidal, Simon E.; Tischler, Nicole D.

    2016-01-01

    Hantaviruses can cause hantavirus pulmonary syndrome or hemorrhagic fever with renal syndrome in humans. To enter cells, hantaviruses fuse their envelope membrane with host cell membranes. Previously, we have shown that the Gc envelope glycoprotein is the viral fusion protein sharing characteristics with class II fusion proteins. The ectodomain of class II fusion proteins is composed of three domains connected by a stem region to a transmembrane anchor in the viral envelope. These fusion proteins can be inhibited through exogenous fusion protein fragments spanning domain III (DIII) and the stem region. Such fragments are thought to interact with the core of the fusion protein trimer during the transition from its pre-fusion to its post-fusion conformation. Based on our previous homology model structure for Gc from Andes hantavirus (ANDV), here we predicted and generated recombinant DIII and stem peptides to test whether these fragments inhibit hantavirus membrane fusion and cell entry. Recombinant ANDV DIII was soluble, presented disulfide bridges and beta-sheet secondary structure, supporting the in silico model. Using DIII and the C-terminal part of the stem region, the infection of cells by ANDV was blocked up to 60% when fusion of ANDV occurred within the endosomal route, and up to 95% when fusion occurred with the plasma membrane. Furthermore, the fragments impaired ANDV glycoprotein-mediated cell-cell fusion, and cross-inhibited the fusion mediated by the glycoproteins from Puumala virus (PUUV). The Gc fragments interfered in ANDV cell entry by preventing membrane hemifusion and pore formation, retaining Gc in a non-resistant homotrimer stage, as described for DIII and stem peptide inhibitors of class II fusion proteins. Collectively, our results demonstrate that hantavirus Gc shares not only structural, but also mechanistic similarity with class II viral fusion proteins, and will hopefully help in developing novel therapeutic strategies against hantaviruses

  15. Edit Distance with Block Deletions

    OpenAIRE

    Dana Shapira; Storer, James A.

    2011-01-01

    Several variants of the edit distance problem with block deletions are considered. Polynomial time optimal algorithms are presented for the edit distance with block deletions allowing character insertions and character moves, but without block moves. We show that the edit distance with block moves and block deletions is NP-complete (Nondeterministic Polynomial time problems in which any given solution to such problem can be verified in polynomial time, and any NP problem can be converted into...

  16. Fermion-Scalar Conformal Blocks

    CERN Document Server

    Iliesiu, Luca; Poland, David; Pufu, Silviu S; Simmons-Duffin, David; Yacoby, Ran

    2015-01-01

    We compute the conformal blocks associated with scalar-scalar-fermion-fermion 4-point functions in 3D CFTs. Together with the known scalar conformal blocks, our result completes the task of determining the so-called `seed blocks' in three dimensions. Conformal blocks associated with 4-point functions of operators with arbitrary spins can now be determined from these seed blocks by using known differential operators.

  17. Fusion technology programme

    International Nuclear Information System (INIS)

    In 1982, KfK joined the fusion programme of EURATOM as a further association introducing its experience in nuclear technology. KfK closely cooperates with IPP Garching, the two institutions forming a research unit aiming at planning and realization of future development steps of fusion. KfK has combined its forces in the Nuclear Fusion Project (PKF) with participation of several KfK departments to the project tasks. Previous work of KfK in magnetic fusion has addressed mainly superconducting magnets, plasma heating by cluster ions and studies on structural materials. At present, emphasis of our work has concentrated increasingly on the nuclear part, i.e. the first wall and blanket structures and the elements of the tritium extraction and purification system. Associated to this component development are studies of remote maintenance and safety. Most of the actual work addresses NET, the next step to a demonstration of fusion feasibility. NET is supposed to follow JET, the operating plasma physics experiment of Euratom, on the 1990's. Detailed progress of the work in the past half year is described in this report. (orig./GG)

  18. Lateral Lumbar Interbody Fusion.

    Science.gov (United States)

    Pawar, Abhijit; Hughes, Alexander; Girardi, Federico; Sama, Andrew; Lebl, Darren; Cammisa, Frank

    2015-12-01

    The lateral lumbar interbody fusion (LLIF) is a relatively new technique that allows the surgeon to access the intervertebral space from a direct lateral approach either anterior to or through the psoas muscle. This approach provides an alternative to anterior lumbar interbody fusion with instrumentation, posterior lumbar interbody fusion, and transforaminal lumbar interbody fusion for anterior column support. LLIF is minimally invasive, safe, better structural support from the apophyseal ring, potential for coronal plane deformity correction, and indirect decompression, which have has made this technique popular. LLIF is currently being utilized for a variety of pathologies including but not limited to adult de novo lumbar scoliosis, central and foraminal stenosis, spondylolisthesis, and adjacent segment degeneration. Although early clinical outcomes have been good, the potential for significant neurological and vascular vertebral endplate complications exists. Nevertheless, LLIF is a promising technique with the potential to more effectively treat complex adult de novo scoliosis and achieve predictable fusion while avoiding the complications of traditional anterior surgery and posterior interbody techniques. PMID:26713134

  19. Fusion: Energy for the future

    International Nuclear Information System (INIS)

    Fusion, which occurs in the sun and the stars, is a process of transforming matter into energy. If we can harness the fusion process on Earth, it opens the way to assuring that future generations will not want for heat and electric power. The purpose of this booklet is to introduce the concept of fusion energy as a viable, environmentally sustainable energy source for the twenty-first century. The booklet presents the basic principles of fusion, the global research and development effort in fusion, and Canada's programs for fusion research and development

  20. Physics of magnetic confinement fusion

    OpenAIRE

    Wagner F

    2013-01-01

    Fusion is the energy source of the universe. The local conditions in the core of the Sun allow the transfer of mass into energy, which is finally released in the form of radiation. Technical fusion melts deuterons and tritons to helium releasing large amounts of energy per fusion process. Because of the conditions for fusion, which will be deduced, the fusion fuel is in the plasma state. Here we report on the confinement of fusion plasmas by magnetic fields. Different confinement concepts — t...

  1. NCCN Evidence Blocks.

    Science.gov (United States)

    Carlson, Robert W; Jonasch, Eric

    2016-05-01

    NCCN has developed a series of Evidence Blocks: graphics that provide ratings for each recommended treatment regimen in terms of efficacy, toxicity, quality and consistency of the supporting data, and affordability. The NCCN Evidence Blocks are currently available in 10 tumor types within the NCCN Clinical Practice Guidelines in Oncology (NCCN Guidelines). At a glance, patients and providers can understand how a given treatment was assessed by the NCCN Guidelines Panel and get a sense of how a given treatment may match individual needs and preferences. Robert W. Carlson, MD, CEO of NCCN, described the reasoning behind this new feature and how the tool is used, and Eric Jonasch, MD, Professor of Genitourinary Medical Oncology at The University of Texas MD Anderson Cancer Center, and Vice Chair of the NCCN Kidney Cancer Panel, described its applicability in the management of metastatic renal cell carcinoma. PMID:27226499

  2. Peaceful Uses of Fusion

    Science.gov (United States)

    Teller, E.

    1958-07-03

    Applications of thermonuclear energy for peaceful and constructive purposes are surveyed. Developments and problems in the release and control of fusion energy are reviewed. It is pointed out that the future of thermonuclear power reactors will depend upon the construction of a machine that produces more electric energy than it consumes. The fuel for thermonuclear reactors is cheap and practically inexhaustible. Thermonuclear reactors produce less dangerous radioactive materials than fission reactors and, when once brought under control, are not as likely to be subject to dangerous excursions. The interaction of the hot plasma with magnetic fields opens the way for the direct production of electricity. It is possible that explosive fusion energy released underground may be harnessed for the production of electricity before the same feat is accomplished in controlled fusion processes. Applications of underground detonations of fission devices in mining and for the enhancement of oil flow in large low-specific-yield formations are also suggested.

  3. Medical Image Fusion

    Directory of Open Access Journals (Sweden)

    Mitra Rafizadeh

    2007-08-01

    Full Text Available Technological advances in medical imaging in the past two decades have enable radiologists to create images of the human body with unprecedented resolution. MRI, PET,... imaging devices can quickly acquire 3D images. Image fusion establishes an anatomical correlation between corresponding images derived from different examination. This fusion is applied either to combine images of different modalities (CT, MRI or single modality (PET-PET."nImage fusion is performed in two steps:"n1 Registration: spatial modification (eg. translation of model image relative to reference image in order to arrive at an ideal matching of both images. Registration methods are feature-based and intensity-based approaches."n2 Visualization: the goal of it is to depict the spatial relationship between the model image and refer-ence image. We can point out its clinical application in nuclear medicine (PET/CT.

  4. Alternate laser fusion drivers

    International Nuclear Information System (INIS)

    One objective of research on inertial confinement fusion is the development of a power generating system based on this concept. Realization of this goal will depend on the availability of a suitable laser or other system to drive the power plant. The primary laser systems used for laser fusion research, Nd3+: Glass and CO2, have characteristics which may preclude their use for this application. Glass lasers are presently perceived to be incapable of sufficiently high average power operation and the CO2 laser may be limited by and issues associated with target coupling. These general perceptions have encouraged a search for alternatives to the present systems. The search for new lasers has been directed generally towards shorter wavelengths; most of the new lasers discovered in the past few years have been in the visible and ultraviolet region of the spectrum. Virtually all of them have been advocated as the most promising candidate for a fusion driver at one time or another

  5. Laser inertial fusion

    International Nuclear Information System (INIS)

    Although the energy of the radiation pulses generated by the world's largest laser facilities approach the MJ limit, it is still lower than that calculated on means of the Lawson criterion for thermonuclear fusion. The severe energy requirements can be weakened by efficient pre-compression of laser targets and by non-linear conversion of laser radiation to shorter wavelengths. The homogeneity of the laser target irradiation can be improved by using multi-beam or indirect-drive laser schemes. The neodymium laser facilities such as Nova Upgrade in Livermore or Gekko XII in Osaca are still the most promising fusion drivers, but the chances of powerful iodine lasers such as ISKRA 5 in Arzamas and Asterix in Munich are also high. The prospects of these and other laser fusion drivers are critically assessed and the role of smaller devices as the Prague iodine laser Perun is discussed. (J.U.) 6 figs., 7 refs

  6. Fusion technology development plan

    International Nuclear Information System (INIS)

    This Fusion Technology Development Plan (FTDP) has been prepared to show how the technology development program conducted by the Division of Development and Technology of the Office of Fusion Energy supports the overall magnetic fusion energy program as delineated in the March 17, 1983, DOE testimony before the Energy Research and Production Subcommittee of the House Committee on Science and Technology. A first draft of this plan distributed for comment in November 1981. since that draft was prepared, changes in expectations for funding in the program have led us to develop a set of priorities based on critical technology issues. These critical issues and the priority ranking of technology development efforts was accomplished with help from each of the major program participants

  7. Ceramics for fusion devices

    International Nuclear Information System (INIS)

    Ceramics are required for a number of applications in fusion devices, among the most critical of which are magnetic coil insulators, windows for RF heating systems, and structural uses. Radiation effects dominate consideration of candidate materials, although good pre-irradiation properties are a requisite. Materials and components can be optimized by careful control of chemical and microstructural content, and application of brittle material design and testing techniques. Future directions for research and development should include further extension of the data base in the areas of electrical, structural, and thermal properties; establishment of a fission neutron/fusion neutron correlation including transmutation gas effects; and development of new materials tailored to meet the specific needs of fusion reactors

  8. Sensor Data Fusion

    DEFF Research Database (Denmark)

    Plascencia, Alfredo; Stepán, Petr

    2006-01-01

    The main contribution of this paper is to present a sensor fusion approach to scene environment mapping as part of a Sensor Data Fusion (SDF) architecture. This approach involves combined sonar array with stereo vision readings.  Sonar readings are interpreted using probability density functions...... to the occupied and empty regions. Scale Invariant Feature Transform (SIFT) feature descriptors are interpreted using gaussian probabilistic error models. The use of occupancy grids is proposed for representing the sensor readings. The Bayesian estimation approach is applied to update the sonar array......  and the SIFT descriptors' uncertainty grids. The sensor fusion yields a significant reduction in the uncertainty of the occupancy grid compared to the individual sensor readings....

  9. Multibiometrics Belief Fusion

    CERN Document Server

    Kisku, Dakshina Ranjan; Gupta, Phalguni

    2010-01-01

    This paper proposes a multimodal biometric system through Gaussian Mixture Model (GMM) for face and ear biometrics with belief fusion of the estimated scores characterized by Gabor responses and the proposed fusion is accomplished by Dempster-Shafer (DS) decision theory. Face and ear images are convolved with Gabor wavelet filters to extracts spatially enhanced Gabor facial features and Gabor ear features. Further, GMM is applied to the high-dimensional Gabor face and Gabor ear responses separately for quantitive measurements. Expectation Maximization (EM) algorithm is used to estimate density parameters in GMM. This produces two sets of feature vectors which are then fused using Dempster-Shafer theory. Experiments are conducted on multimodal database containing face and ear images of 400 individuals. It is found that use of Gabor wavelet filters along with GMM and DS theory can provide robust and efficient multimodal fusion strategy.

  10. Fusion research at ORNL

    International Nuclear Information System (INIS)

    The ORNL Fusion Program includes the experimental and theoretical study of two different classes of magnetic confinement schemes - systems with helical magnetic fields, such as the tokamak and stellarator, and the ELMO Bumpy Torus (EBT) class of toroidally linked mirror systems; the development of technologies, including superconducting magnets, neutral atomic beam and radio frequency (rf) heating systems, fueling systems, materials, and diagnostics; the development of databases for atomic physics and radiation effects; the assessment of the environmental impact of magnetic fusion; and the design of advanced demonstration fusion devices. The program involves wide collaboration, both within ORNL and with other institutions. The elements of this program are shown. This document illustrates the program's scope; and aims by reviewing recent progress

  11. Fusion Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed.

  12. Mirror Fusion Test Facility

    International Nuclear Information System (INIS)

    On October 1, 1977 work began at LLL on the Mirror Fusion Test Facility (MFTF), an advanced experimental fusion device. Scheduled for operation in late 1981, MFTF is designed as an intermediate step between present mirror machines, such as 2XIIB, and an experimental fusion reactor. This design incorporates improved technology and a better theoretical understanding of how neutral beam injection, plasma guns, and gas injection into the plasma region compensate for cooling and particle losses. With the new facility, we expect to achieve a confinement factor (n tau) of 1012 particles . sm/cm3--a tenfold increase over 2XIIB n tau values--and to increase plasma temperature to over 500 million K. The following article describes this new facility and reports on progress in some of the R and D projects that are providing the technological base for its construction

  13. SUPERFICIAL CERVICAL PLEXUS BLOCK

    Directory of Open Access Journals (Sweden)

    Komang Mega Puspadisari

    2014-01-01

    Full Text Available Superficial cervical plexus block is one of the regional anesthesia in  neck were limited to thesuperficial fascia. Anesthesia is used to relieve pain caused either during or after the surgery iscompleted. This technique can be done by landmark or with ultrasound guiding. The midpointof posterior border of the Sternocleidomastoid was identified and the prosedure done on thatplace or on the level of cartilage cricoid.

  14. Induction of Cell-Cell Fusion by Ebola Virus Glycoprotein: Low pH Is Not a Trigger.

    Science.gov (United States)

    Markosyan, Ruben M; Miao, Chunhui; Zheng, Yi-Min; Melikyan, Gregory B; Liu, Shan-Lu; Cohen, Fredric S

    2016-01-01

    Ebola virus (EBOV) is a highly pathogenic filovirus that causes hemorrhagic fever in humans and animals. Currently, how EBOV fuses its envelope membrane within an endosomal membrane to cause infection is poorly understood. We successfully measure cell-cell fusion mediated by the EBOV fusion protein, GP, assayed by the transfer of both cytoplasmic and membrane dyes. A small molecule fusion inhibitor, a neutralizing antibody, as well as mutations in EBOV GP known to reduce viral infection, all greatly reduce fusion. By monitoring redistribution of small aqueous dyes between cells and by electrical capacitance measurements, we discovered that EBOV GP-mediated fusion pores do not readily enlarge-a marked difference from the behavior of other viral fusion proteins. EBOV GP must be cleaved by late endosome-resident cathepsins B or L in order to become fusion-competent. Cleavage of cell surface-expressed GP appears to occur in endosomes, as evidenced by the fusion block imposed by cathepsin inhibitors, agents that raise endosomal pH, or an inhibitor of anterograde trafficking. Treating effector cells with a recombinant soluble cathepsin B or thermolysin, which cleaves GP into an active form, increases the extent of fusion, suggesting that a fraction of surface-expressed GP is not cleaved. Whereas the rate of fusion is increased by a brief exposure to acidic pH, fusion does occur at neutral pH. Importantly, the extent of fusion is independent of external pH in experiments in which cathepsin activity is blocked and EBOV GP is cleaved by thermolysin. These results imply that low pH promotes fusion through the well-known pH-dependent activity of cathepsins; fusion induced by cleaved EBOV GP is a process that is fundamentally independent of pH. The cell-cell fusion system has revealed some previously unappreciated features of EBOV entry, which could not be readily elucidated in the context of endosomal entry. PMID:26730950

  15. Insulators for fusion applications

    International Nuclear Information System (INIS)

    Design studies for fusion devices and reactors have become more detailed in recent years and with this has come a better understanding of requirements and operating conditions for insulators in these machines. Ceramic and organic insulators are widely used for many components of fusion devices and reactors namely: radio frequency (RF) energy injection systems (BeO, Al2O3, Mg Al2O4, Si3N4); electrical insulation for the torus structure (SiC, Al2O3, MgO, Mg Al2O4, Si4Al2O2N6, Si3N4, Y2O3); lightly-shielded magnetic coils (MgO, MgAl2O4); the toroidal field coil (epoxies, polyimides), neutron shield (B4C, TiH2); high efficiency electrical generation; as well as the generation of very high temperatures for high efficiency hydrogen production processes (ZrO2 and Al2O3 - mat, graphite and carbon - felt). Timely development of insulators for fusion applications is clearly necessary. Those materials to be used in fusion machines should show high resistance to radiation damage and maintain their structural integrity. Now the need is urgent for a variety of radiation resistant materials, but much effort in these areas is required for insulators to be considered seriously by the design community. This document contains 14 papers from an IAEA meeting. It was the objective of this meeting to identify existing problems in analysing various situations of applications and requirements of electrical insulators and ceramics in fusion and to recommend strategies and different stages of implementation. This meeting was endorsed by the International Fusion Research Council

  16. Neutrons and fusion

    International Nuclear Information System (INIS)

    The production of energy from fusion reactions does not require neutrons in the fundamental sense that they are required in a fission reactor. Nevertheless, the dominant fusion reaction, that between deuterium and tritium, yields a 14 MeV neutron. To contrast a fusion reactor based on this reaction with the fission case, 3 x 1020 such neutrons produced per gigawatt of power. This is four times as many neutrons as in an equivalent fission reactor and they carry seven times the energy of the fission neutrons. Thus, they dominate the energy recovery problem and create technological problems comparable to the original plasma confinement problem as far as a practical power producing device is concerned. Further contrasts of the fusion and fission cases are presented to establish the general role of neutrons in fusion devices. Details of the energy deposition processes are discussed and those reactions necessary for producing additional tritium are outlined. The relatively high energy flux with its large intensity will activate almost any materials of which the reactor may be composed. This activation is examined from the point of view of decay heat, radiological safety, and long-term storage. In addition, a discussion of the deleterious effects of neutron interactions on materials is given in some detail; this includes the helium and hydrogen producing reactions and displacement rate of the lattice atoms. The various materials that have been proposed for structural purposes, for breeding, reflecting, and moderating neutrons, and for radiation shielding are reviewed from the nuclear standpoint. The specific reactions of interest are taken up for various materials and finally a report is given on the status and prospects of data for fusion studies

  17. Managing access block.

    Science.gov (United States)

    Cameron, Peter; Scown, Paul; Campbell, Donald

    2002-01-01

    There is pessimism regarding the ability of the Acute Health Sector to manage access block for emergency and elective patients. Melbourne Health suffered an acute bed crisis in 2001 resulting in record ambulance diversions and emergency department (ED) delays. We conducted an observational study to reduce access block for emergency patients whilst maintaining elective throughput at Melbourne Health. This involved a clinician-led taskforce using previously proven principles for organisational change to implement 51 actions to improve patient access over a three-month period. The primary outcome measures were ambulance diversion, emergency patients waiting more than 12 hours for an inpatient bed, elective throughput and theatre cancellations. Despite a reduction in multi-day bed numbers all primary objectives were met, ambulance diversion decreased to minimal levels, 12-hour waits decreased by 40% and elective throughput was maintained. Theatre cancellations were also minimised. We conclude that access block can be improved by clinician-led implementation of proven process improvements over a short time frame. The ability to sustain change over the longer term requires further study.

  18. Blocks of finite groups and their invariants

    CERN Document Server

    Sambale, Benjamin

    2014-01-01

    Providing a nearly complete selection of up-to-date methods and results on block invariants with respect to their defect groups, this book covers the classical theory pioneered by Brauer, the modern theory of fusion systems introduced by Puig, the geometry of numbers developed by Minkowski, the classification of finite simple groups, and various computer assisted methods. In a powerful combination, these tools are applied to solve many special cases of famous open conjectures in the representation theory of finite groups. Most of the material is drawn from peer-reviewed journal articles, but there are also new previously unpublished results. In order to make the text self-contained, detailed proofs are given whenever possible. Several tables add to the text's usefulness as a reference. The book is aimed at experts in group theory or representation theory who may wish to make use of the presented ideas in their research.

  19. Advanced fusion concepts program

    International Nuclear Information System (INIS)

    While the prospects for the eventual development of a tokamak-based fusion reactor appear promising at the present time, the Department of Energy maintains a vigorous program in alternate magnetic fusion concepts. Several of the concepts presently supported include the toroidal reversed field pinch, Tormac, Elmo Bumpy Torus, and various linear options. Recent technical accomplishments and program evaluations indicate that the possibility now exists for undertaking the next development stage, a proof-of-principle experiment, for a few of the most promising alternate concepts

  20. Atomic data for fusion

    International Nuclear Information System (INIS)

    This report provides a handbook of recommended cross-section and rate-coefficient data for inelastic collisions between hydrogen, helium and lithium atoms, molecules and ions, and encompasses more than 400 different reactions of primary interest in fusion research. Published experimental and theoretical data have been collected and evaluated, and the recommended data are presented in tabular, graphical and parametrized form. Processes include excitation and spectral line emission, charge exchange, ionization, stripping, dissociation and particle interchange reactions. The range of collision energies is appropriate to applications in fusion-energy research

  1. Alternate fusion concepts

    International Nuclear Information System (INIS)

    This review summarizes the status of alternate fusion concepts and plans for their future. The concepts selected for review are those employing electromagnetic confinement for which there have been reasonable predictions of net energy gain from pure fusion and which have shown significant recent development or are the subjects of ongoing international activity. They include advanced tokamaks, stellarators, the spherical torus, reversed-field pinch and dense z-field pinch devices, field reversed configuration, and spheromaks. In addition, an overall view of the status of each concept with respect to achieving ignition and to reactor designs is presented

  2. Small mirror fusion reactors

    International Nuclear Information System (INIS)

    Basic requirements for the pilot plants are that they produce a net product and that they have a potential for commercial upgrade. We have investigated a small standard mirror fusion-fission hybrid, a two-component tandem mirror hybrid, and two versions of a field-reversed mirror fusion reactor--one a steady state, single cell reactor with a neutral beam-sustained plasma, the other a moving ring field-reversed mirror where the plasma passes through a reaction chamber with no energy addition

  3. Cold fusion in perspective

    International Nuclear Information System (INIS)

    Since early April a great deal of excitement has been created over the Fleischmann/Pons cold fusion experiment, which if it performs as advertised, could turn out to be mankind's best hope of heading off the energy crisis scheduled for early in the next century. Dozens of groups around the world are now attempting to duplicate the experiment to see if Fleischmann and Pons' discovery is an experimental mistake, an unknown electrochemical effect or a new kind of fusion reaction. This article puts the experiment into the perspective of today and looks at how it might affect the energy scene tomorrow if it should turn out to be commercially exploitable. (author)

  4. The European Fusion Programme

    International Nuclear Information System (INIS)

    The European Fusion Programme is coordinated by Euratom and represents a long term cooperative project of Member States of the European Communities in the field of fusion, designed to lead to the joint construction of prototypes. The main lines of the programme proposed for 1982 to 1986 are: (1) the continuation of a strong effort on tokamaks with emphasis on JET construction, operation and upgrading, (2) conceptual design of NET and development of the related technology, and (3) further work on two alternative magnetic confinement systems. The current status and future plans for this programme are discussed in the paper. (author)

  5. Fusiones transfronterizas intracomunitarias

    OpenAIRE

    Garcia Wintzer, Laura

    2015-01-01

    A lo largo de este trabajo llevará a cabo un estudio sobre las fusiones transfronterizas intracomunitarias. Dado que es una figura relativamente nueva en el ordenamiento jurídico, tanto a nivel español como europeo, se ha considerado oportuno estudiar dicha operación desde diferentes perspectivas. La elección de las fusiones transfronterizas intracomunitarias como objeto de es-tudio viene a partir de la valoración de las diferentes modificaciones estructurales existentes en el ámbito mercanti...

  6. Atomic data for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, H.T.; Kirkpatrick, M.I.; Alvarez, I.; Cisneros, C.; Phaneuf, R.A. (eds.); Barnett, C.F.

    1990-07-01

    This report provides a handbook of recommended cross-section and rate-coefficient data for inelastic collisions between hydrogen, helium and lithium atoms, molecules and ions, and encompasses more than 400 different reactions of primary interest in fusion research. Published experimental and theoretical data have been collected and evaluated, and the recommended data are presented in tabular, graphical and parametrized form. Processes include excitation and spectral line emission, charge exchange, ionization, stripping, dissociation and particle interchange reactions. The range of collision energies is appropriate to applications in fusion-energy research.

  7. Fusion Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on fusion reactor materials includes: (1) the study of the mechanical behaviour of structural materials under neutron irradiation (including steels, inconel, molybdenum, chromium); (2) the determination and modelling of the characteristics of irradiated first wall materials such as beryllium; (3) the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; (4) the study of the dismantling and waste disposal strategy for fusion reactors.; (5) a feasibility study for the testing of blanket modules under neutron radiation. Main achievements in these topical areas in the year 1999 are summarised.

  8. Contributions on Laser Driven Inertial Confinement Fusion

    Directory of Open Access Journals (Sweden)

    Heinrich Hora

    2005-01-01

    Full Text Available The following modified preprint of a chapter in the forthcoming book by Guillermo Velarde and Natividad Carpintero Santamaria Inertial Confinement Nuclear Fusion: A Historical Approach by its Pioneers with personal comments is presented here as an example about the long years difficult developments towards the aim for producing unlimited, safe and clean nuclear energy in the same way as it is the energy source of the sun. There are arguments that the most recent developments with the plasma block ignition using petawatt-picosecond laser pulses may lead to a fusion power station with a highly simplified operation such that the cost of electricity may be three or more times lower than any energy source on earth, opening the golden age with dramatic consequences for human life and the environment. Applied sciences in all fields, economics and politics may be stimulated just by considering these consequences though these new results on Inertial Fusion Energy (IFE need to be further examined and developed on a broad basis.

  9. E-Block: A Tangible Programming Tool with Graphical Blocks

    Directory of Open Access Journals (Sweden)

    Danli Wang

    2013-01-01

    Full Text Available This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transferred to computer by microcomputers and then translated into semantic information. The system applies wireless and infrared technologies and provides user with feedbacks on both screen and programming blocks. Preliminary user studies using observation and user interview methods are shown for E-Block's prototype. The test results prove that E-Block is attractive to children and easy to learn and use. The project also highlights potential advantages of using single chip microcomputer (SCM technology to develop tangible programming tools for children.

  10. Alternate fusion concepts as reactors

    International Nuclear Information System (INIS)

    The recent successes of the tokamak concept of controlled fusion have not quenched interest in possible alternatives. This report summarizes a recent study sponsored by the Electric Power Research Institute, which tried to quantify which hoped-for advantages persist when a serious attempt is made to design reactor plants around eight specific alternative concepts (Electron Beam-Heated Solenoid, Elmo Bumpy Torus, Fast Liner, Laser-Heated Solenoid, Linear Theta-Pinch, LINUS, Reversed-Field-Pinch, and Shock-Heated Annulus) addressing key technological issues and economic issues for each concept. The study aimed to isolate the cost drivers for the reactor plant and to compare their capital cost per kilowatt of electricity as well as address the impact of technological difficulty. Results of the study indicated that reactor block costs for the eight plants studied represent a substantially larger fraction of total plant costs than the corresponding fraction for light water reactors; bottom line costs of $ /kWe range over a factor of about two with cost drivers being the physical size of the power producing plasma and the relative magnitudes of the circulating power fraction and the nature of the power circulation. Other cost considerations are also enumerated and the author concludes by noting that one value of the engineering study and cost estimate has been to quantify the relation between physics uncertainty and cost uncertainty

  11. Implication des peptides de fusion des glycoprotéines de fusion virales de classe I dans la fusion membranaire

    OpenAIRE

    Brasseur R.; Charloteaux B.; Lins L.; Lorin A.

    2007-01-01

    The implication of fusion peptides of class I viral fusion glycoproteins in the membrane fusion. Viral infection involves fusion between the viral envelope and the target cell plasmic membrane. The fusion is induced by a glycoprotein anchored in the viral envelope. After activation, the glycoprotein undergoes a conformational change inducing the exposure of a region named « fusion peptide » essential for the fusion process. Studies on glycoproteins and on isolated fusion peptides have allowed...

  12. A novel image fusion approach based on compressive sensing

    Science.gov (United States)

    Yin, Hongpeng; Liu, Zhaodong; Fang, Bin; Li, Yanxia

    2015-11-01

    Image fusion can integrate complementary and relevant information of source images captured by multiple sensors into a unitary synthetic image. The compressive sensing-based (CS) fusion approach can greatly reduce the processing speed and guarantee the quality of the fused image by integrating fewer non-zero coefficients. However, there are two main limitations in the conventional CS-based fusion approach. Firstly, directly fusing sensing measurements may bring greater uncertain results with high reconstruction error. Secondly, using single fusion rule may result in the problems of blocking artifacts and poor fidelity. In this paper, a novel image fusion approach based on CS is proposed to solve those problems. The non-subsampled contourlet transform (NSCT) method is utilized to decompose the source images. The dual-layer Pulse Coupled Neural Network (PCNN) model is used to integrate low-pass subbands; while an edge-retention based fusion rule is proposed to fuse high-pass subbands. The sparse coefficients are fused before being measured by Gaussian matrix. The fused image is accurately reconstructed by Compressive Sampling Matched Pursuit algorithm (CoSaMP). Experimental results demonstrate that the fused image contains abundant detailed contents and preserves the saliency structure. These also indicate that our proposed method achieves better visual quality than the current state-of-the-art methods.

  13. Drivers for light ion fusion

    International Nuclear Information System (INIS)

    The light ion approach to inertial confinement fusion requires the production of 1013 to 1014 watt and 106 to 107 joule pulses. The accelerator technology developed in the particle beam fusion program is capable of fulfilling these requirements

  14. Accelerator and fusion research division

    International Nuclear Information System (INIS)

    This report contains brief discussions on research topics in the following area: Heavy-Ion Fusion Accelerator Research; Magnetic Fusion Energy; Advanced Light Source; Center for Beam Physics; Superconducting Magnets; and Bevalac Operations

  15. Fusion in the energy system

    DEFF Research Database (Denmark)

    Fusion energy is the fundamental energy source of the Universe, as the energy of the Sun and the stars are produced by fusion of e.g. hydrogen to helium. Fusion energy research is a strongly international endeavor aiming at realizing fusion energy production in power plants on Earth. Reaching...... this goal, mankind will have a sustainable base load energy source with abundant resources, having no CO2 release, and with no longlived radioactive waste. This presentation will describe the basics of fusion energy production and the status and future prospects of the research. Considerations...... of integration into the future electricity system and socio-economic studies of fusion energy will be presented, referring to the programme of Socio-Economic Research on Fusion (SERF) under the European Fusion Energy Agreement (EFDA)....

  16. Multisensor data fusion algorithm development

    Energy Technology Data Exchange (ETDEWEB)

    Yocky, D.A.; Chadwick, M.D.; Goudy, S.P.; Johnson, D.K.

    1995-12-01

    This report presents a two-year LDRD research effort into multisensor data fusion. We approached the problem by addressing the available types of data, preprocessing that data, and developing fusion algorithms using that data. The report reflects these three distinct areas. First, the possible data sets for fusion are identified. Second, automated registration techniques for imagery data are analyzed. Third, two fusion techniques are presented. The first fusion algorithm is based on the two-dimensional discrete wavelet transform. Using test images, the wavelet algorithm is compared against intensity modulation and intensity-hue-saturation image fusion algorithms that are available in commercial software. The wavelet approach outperforms the other two fusion techniques by preserving spectral/spatial information more precisely. The wavelet fusion algorithm was also applied to Landsat Thematic Mapper and SPOT panchromatic imagery data. The second algorithm is based on a linear-regression technique. We analyzed the technique using the same Landsat and SPOT data.

  17. Extreme Lateral Interbody Fusion Procedure

    Medline Plus

    Full Text Available ... for spine surgery called XLIF, extreme lateral interbody fusion. Dr. Juan Uribe will perform the procedure. Dr. ... A better term would be extreme lateral interbody fusion. This is a procedure that has been performed ...

  18. Block Transfer Handbook: Constructing and Negotiating Block Transfer Agreements.

    Science.gov (United States)

    Finlay, Finola

    The purpose of this handbook is to provide resources for institutions or articulation committees who are engaged in the task of investigating the feasibility of block transfer agreements. Block transfer is the process whereby a block of credits is granted to students who have successfully completed a certificate, diploma, or cluster of courses…

  19. Fusion Engineering Device design description

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, C.A.; Steiner, D.; Smith, G.E.

    1981-12-01

    The US Magnetic Fusion Engineering Act of 1980 calls for the operation of a Fusion Engineering Device (FED) by 1990. It is the intent of the Act that the FED, in combination with other testing facilities, will establish the engineering feasibility of magnetic fusion energy. During 1981, the Fusion Engineering Design Center (FEDC), under the guidance of a Technical Management Board (TMB), developed a baseline design for the FED. This design is summarized herein.

  20. Fusion engineering device design description

    International Nuclear Information System (INIS)

    The US Magnetic Fusion Engineering Act of 1980 calls for the operation of a Fusion Engineering Device (FED) by 1990. It is the intent of the Act that the FED, in combination with other testing facilities, will establish the engineering feasibility of magnetic fusion energy. During 1981, the Fusion Engineering Design Center (FEDC), under the guidance of a Technical Management Board (TMB), developed a baseline design for the FED. This design is summarized herein

  1. Simulation science for fusion plasmas

    OpenAIRE

    Sudo, S.; Skoric, M.M.; Watanabe, T-H.; Todo, Y.; Ishizawa, A.; Miura, H; Ito, A; Ohtani, H.; Usami, S.; Nakamura, H; ITO, Atsushi; Ishiguro, S.; Tomita, Y.; Takayama, A.; M. Sato

    2008-01-01

    The world fusion effort has embarked into a new age with the construction of ITER in Cadarache, France, which will be the first magnetic confinement fusion plasma experiment dominated by the self-heating of fusion reactions. In order to operate and control burning plasmas and next generation demo fusion reactors, an advanced capability for comprehensive integrated computer simulations that are fully verified and validated against experimental data will be necessary. The ultimate goal is to pr...

  2. Fusion Engineering Device design description

    International Nuclear Information System (INIS)

    The US Magnetic Fusion Engineering Act of 1980 calls for the operation of a Fusion Engineering Device (FED) by 1990. It is the intent of the Act that the FED, in combination with other testing facilities, will establish the engineering feasibility of magnetic fusion energy. During 1981, the Fusion Engineering Design Center (FEDC), under the guidance of a Technical Management Board (TMB), developed a baseline design for the FED. This design is summarized herein

  3. Fusion in the energy system

    OpenAIRE

    Grohnheit, Poul Erik

    2009-01-01

    Fusion energy is the fundamental energy source of the Universe, as the energy of the Sun and the stars are produced by fusion of e.g. hydrogen to helium. Fusion energy research is a strongly international endeavor aiming at realizing fusion energy production in power plants on Earth. Reaching this goal, mankind will have a sustainable base load energy source with abundant resources, having no CO2 release, and with no longlived radioactive waste. This presentation will describe the basics of f...

  4. Fusion engineering device design description

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, C.A.; Steiner, D.; Smith, G.E.

    1981-12-01

    The US Magnetic Fusion Engineering Act of 1980 calls for the operation of a Fusion Engineering Device (FED) by 1990. It is the intent of the Act that the FED, in combination with other testing facilities, will establish the engineering feasibility of magnetic fusion energy. During 1981, the Fusion Engineering Design Center (FEDC), under the guidance of a Technical Management Board (TMB), developed a baseline design for the FED. This design is summarized herein.

  5. Demographic Data - MDC_Block

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — A polygon feature class of Miami-Dade Census 2000 Blocks. Census blocks are areas bounded on all sides by visible and/or invisible features shown on a map prepared...

  6. Graphite for fusion energy applications

    International Nuclear Information System (INIS)

    Graphite is in widespread and beneficial use in present fusion energy devices. This report reflects the view of graphite materials scientists on using graphite in fusion devices. Graphite properties are discussed with emphasis on application to fusion reactors. This report is intended to be introductory and descriptive and is not intended to serve as a definitive information source

  7. Fusion development and technology

    International Nuclear Information System (INIS)

    This report discusses the following topics: superconducting magnet technology high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies -- Aries; ITER physics; ITER superconducting PF scenario and magnet analysis; and safety, environmental and economic factors in fusion development

  8. Muon catalyzed fusion

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, K. [Advanced Meson Science Laboratory, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Nagamine, K. [Muon Science Laboratory, IMSS-KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Matsuzaki, T. [Advanced Meson Science Laboratory, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Kawamura, N. [Muon Science Laboratory, IMSS-KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan)

    2005-12-15

    The latest progress of muon catalyzed fusion study at the RIKEN-RAL muon facility (and partly at TRIUMF) is reported. The topics covered are magnetic field effect, muon transfer to {sup 3}He in solid D/T and ortho-para effect in dd{mu} formation.

  9. Intelligence Fusion [video

    OpenAIRE

    Center for Homeland Defense and Security Naval Postgraduate School; France, Paul

    2016-01-01

    Paul France is the Homeland Security Field Operations Manager for the state of Wisconsin. He is a current participant in the Naval Postgraduate School's Homeland Security Master's Program and is working on a thesis entitled 'Preventing Terrorism through Information Sharing Using TEW Systems and Intelligence Fusion Centers.

  10. Towards nuclear fusion reactors

    International Nuclear Information System (INIS)

    In the middle of 21st century, the population on the earth is expected to double, and the energy that mankind consumes to triple. The nuclear fusion which is said the ultimate energy source for mankind is expected to solve this energy problem. As for fusion reactors, fuel materials exist inexhaustibly, distributing evenly, they have high safety in principle, the product of burning is harmless nonradioactive substance that does not require the treatment and disposal, and the attenuation of induced radioactivity due to neutrons is quick and the effect to global environment is little. The basic plan of second stage nuclear fusion research and development was decided in 1975, aiming at attaining the critical plasma condition. JT-60 has attained it in 1987. The project of international thermonuclear fusion experimental reactor (ITER) was started, and the conceptual design was carried out. Under such background, the third stage basic plan was decided in 1992, and its objective is self ignition condition, long time burning and the basis of the reactor engineering technology. The engineering design of the ITER is investigated. (K.I.)

  11. Rencontre on fusion technology

    International Nuclear Information System (INIS)

    This report of a rencontre held to consider the technology of magnetic confinement fusion devices gives the agenda for the meeting and lists those topics which were identified as areas of research. These topics included materials, tritium, structures and heat transfer, neutronics and nuclear data, and corrosion problems. (UK)

  12. Bouillabaisse sushi fusion power

    CERN Multimedia

    2004-01-01

    "If avant-garde cuisine is any guide, Japanese-French fusion does not work all that well. And the interminable discussions over the International Thermonuclear Experimental Reactor (ITER) suggest that what is true of cooking is true of physics" (1 page)

  13. International fusion og spaltning

    DEFF Research Database (Denmark)

    Hansen, Lone L.

    Bogen analyserer de nye muligheder fra 2007 i europæisk ret med hensyn til fusion eller spaltning mellem aktieselskaber og anpartsselskaber med hjemsted i forskellige europæiske lande. Bogen gennemgår de nye muligheder for strukturændringer, der herved er opstået mulighed for, og den sætter fokus...

  14. Fusion technology programme

    International Nuclear Information System (INIS)

    KfK is involved in the European Fusion Programme predominantly in the NET and Fusion Technology part. The following fields of activity are covered: Studies for NET, alternative confinement concepts, and needs and issues of integral testing. Research on structural materials. Development of superconducting magnets. Gyrotron development (part of the Physics Programme). Nuclear technology (breeding materials, blanket design, tritium technology, safety and environmental aspects of fusion, remote maintenance). Reported here are status and results of work under contracts with the CEC within the NET and Technology Programme. The aim of the major part of this R and D work is the support of NET, some areas (e.g. materials, safety and environmental impact, blanket design) have a wider scope and address problems of a demonstration reactor. In the current working period, several new proposals have been elaborated to be implemented into the 85/89 Euratom Fusion Programme. New KfK contributions relate to materials research (dual beam and fast reactor irradiations, ferritic steels), to blanket engineering (MHD-effects) and to safety studies (e.g. magnet safety). (orig./GG)

  15. Fusion og frasigelse

    DEFF Research Database (Denmark)

    Hansen, Lone L.

    2012-01-01

    Artiklen analyserer, i hvilket omfang reglerne om beskyttelse af lønmodtagere ved virksomhedsoverdragelse også finder anvendelse ved selskabsretliug fusion og spaltning. Der sættes fokus på forskrifterne om erhververens frasigelse af overdragerens kollektive overenskomster, og det efterprøves, om...

  16. Status of inertial fusion

    International Nuclear Information System (INIS)

    The technology advancement to high-power beams has also given birth to new technologies. That class of Free Electron Lasers that employs rf linacs, synchrotrons, and storage rings - although the use the tools of High Energy Physics (HEP) - was developed well behind the kinetic energy frontier. The induction linac, however, is something of an exception; it was born directly from the needs of the magnetic fusion program, and was not motivated by a high-energy physics application. The heavy-ion approach to inertial fusion starts with picking from the rich menu of accelerator technologies those that have, ab initio, the essential ingredients needed for a power plant driver: multigap acceleration - which leads to reliability/lifetime; electrical efficiency; repetition rate; and beams that can be reliably focused over a suitably long distance. The report describes the programs underway in Heavy Ion Fusion Accelerator Research as well as listing expected advances in driver, target, and beam quality areas in the inertial fusion power program

  17. Fusion energy studies

    International Nuclear Information System (INIS)

    The following topics are considered: (1) cryosorption vacuum pumping for fusion reactors, (2) TNS support studies, (3) tritium recovery from irradiated Li-Al and SAP, (4) actinide oxides, nitrides, and carbides, and (5) transition metal-actinide-C phase equilibria

  18. Fusion Canada issue 21

    International Nuclear Information System (INIS)

    A short bulletin from the National Fusion Program highlighting in this issue Europe proposes Canada's participation in ITER, tritium for JET, CCFM/TdeV-Tokamak helium pumping and TdeV update, ITER-related R and D at CFFTP, ITER Deputy Director visits Canada, NFP Director to Chair IFRC, Award for Akira Hirose. 3 figs

  19. Fusion reactor materials

    International Nuclear Information System (INIS)

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics

  20. Mars manned fusion spaceship

    Science.gov (United States)

    Hedrick, James; Buchholtz, Brent; Ward, Paul; Freuh, Jim; Jensen, Eric

    1991-01-01

    Fusion Propulsion has an enormous potential for space exploration in the near future. In the twenty-first century, a usable and efficient fusion rocket will be developed and in use. Because of the great distance between other planets and Earth, efficient use of time, fuel, and payload is essential. A nuclear spaceship would provide greater fuel efficiency, less travel time, and a larger payload. Extended missions would give more time for research, experiments, and data acquisition. With the extended mission time, a need for an artificial environment exists. The topics of magnetic fusion propulsion, living modules, artificial gravity, mass distribution, space connection, and orbital transfer to Mars are discussed. The propulsion system is a magnetic fusion reactor based on a tandem mirror design. This allows a faster, shorter trip time and a large thrust to weight ratio. The fuel proposed is a mixture of deuterium and helium-3. Helium-3 can be obtained from lunar mining. There will be minimal external radiation from the reactor resulting in a safe, efficient propulsion system.

  1. Fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1989-01-01

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics.

  2. Porous block nanofiber composite filters

    Energy Technology Data Exchange (ETDEWEB)

    Ginley, David S.; Curtis, Calvin J.; Miedaner, Alexander; Weiss, Alan J.; Paddock, Arnold

    2016-08-09

    Porous block nano-fiber composite (110), a filtration system (10) and methods of using the same are disclosed. An exemplary porous block nano-fiber composite (110) includes a porous block (100) having one or more pores (200). The porous block nano-fiber composite (110) also includes a plurality of inorganic nano-fibers (211) formed within at least one of the pores (200).

  3. Status of beryllium development for fusion applications

    International Nuclear Information System (INIS)

    Beryllium is a leading candidate material for the neutron multiplier of tritium breeding blankets and the plasma-facing component of first-wall and divertor systems. Depending on the application, the fabrication methods proposed include hot-pressing, hot-isostatic-pressing, cold-isostatic-pressing/sintering, rotary electrode processing and plasma spraying. Product forms include blocks, tubes, pebbles, tiles and coatings. While, in general, beryllium is not a leading structural material candidate, its mechanical performance, as well as its performance with regard to sputtering, heat transport, tritium retention/release, helium-induced swelling and chemical compatibility, is an important consideration in first-wall/blanket design. Differential expansion within the beryllium causes internal stresses which may result in cracking, thereby affecting the heat transport and barrier performance of the material. Overall deformation can result in loading of neighboring structural material. Thus, in assessing the performance of beryllium for fusion applications, it is important to have a good database in all of these performance areas, as well as a set of properties correlations and models for the purpose of interpolation/extrapolation.In this current work, the range of anticipated fusion operating conditions is reviewed. The thermal, mechanical, chemical compatibility, tritium retention/release, and helium retention/swelling databases are then reviewed for fabrication methods and fusion operating conditions of interest. Properties correlations and uncertainty ranges are also discussed. In the case of the more complex phenomena of tritium retention/release and helium-induced swelling, fundamental mechanisms and models are reviewed in more detail. Areas in which additional data are needed are highlighted, along with some trends which suggest ways of optimizing the performance of beryllium for fusion applications. (orig.)

  4. CORE SATURATION BLOCKING OSCILLATOR

    Science.gov (United States)

    Spinrad, R.J.

    1961-10-17

    A blocking oscillator which relies on core saturation regulation to control the output pulse width is described. In this arrangement an external magnetic loop is provided in which a saturable portion forms the core of a feedback transformer used with the thermionic or semi-conductor active element. A first stationary magnetic loop establishes a level of flux through the saturation portion of the loop. A second adjustable magnet moves the flux level to select a saturation point giving the desired output pulse width. (AEC)

  5. The fusion applications study: FAME (Fusion Applications and Market Evaluation)

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.R.

    1986-01-01

    In recent years, the fusion program has made a great deal of progress on the understanding of plasma physics. The primary mission of the fusion program in the past has been the generation of central station electricity. The demand for electricity, however, has slackened in recent years, fossil fuel prices are low, and the need to develop an assured, economical, long-term energy supply for the United States is no longer perceived as an immediate need. Fusion has the potential for a wide variety of nonelectric application including the breeding of fissile fuels and tritium, production of hydrogen and other chemical products, transmutation or burning of various nuclear and chemical products, transmutation or burning of various nuclear and chemical wastes, generation of process heat, production of many useful radioisotopes, radiation processing of materials, medical diagnosis and treatment, and space power and propulsion. To understand the many possible applications of fusion, GA Technologies has begun a fusion applications study for the U.S. Department of Energy's Office of Fusion Energy (DOE OFE) called FAME for Fusion Applications and Market Evaluation. The objective of this project is to investigate, evaluate, and summarize the potential applications of fusion energy, and to identify promising directions for future work on fusion applications. This study includes a broad survey of the possible uses of fusion and the products that could be obtained from a fusion reactor. The potential markets for these products are being assessed. 1 ref.

  6. Fluorescent S-layer fusion proteins

    International Nuclear Information System (INIS)

    This work describes the construction and characterisation of fluorescent S-layer fusion proteins used as building blocks for the fabrication of nanostructured monomolecular biocoatings on silica particles with defined fluorescence properties. The S-layer protein SgsE of Geobacillus stearothermophilus NRS 2004/3a was fused with the pH-dependant cyan, green and yellow variant of the green fluorescent protein (GFP) and the red fluorescent protein mRFP1. These fluorescent S-layer fusion proteins, acting as scaffold and optical sensing element simultaneously, were able to reassemble in solution and on silica particles forming 2D nanostructures with p2 lattice symmetry (a=11 ±0.5 nm, b=14 ±0.4 nm, g=80 ±1o). The pH-dependant fluorescence behaviour was studied with fluorimetry, confocal microscopy and flow cytometry. These fluorescent S-layer fusion proteins can be used as pH-sensor. 50% of the fluorescence intensity decreases at their calculated pKa values (pH6 - pH5). The fluorescence intensity of the GFP variants vanished completely between pH4 and pH3 whereas the chromophore of the red protein mRFP1 was only slightly affected in acidic conditions. At the isoelectric point of the S-layer coated silica particles (pH4.6 ±0.2) an increase in particle aggregation was detected by flow cytometry. The cyan and yellow fluorescent proteins were chosen to create a bi-fluorescent S-layer tandem fusion protein with the possibility for resonance energy transfer (FRET). A transfer efficiency of 20% and a molecular distance between the donor (ECFP) and acceptor (YFP) chromophores of around 6.2 nm could be shown. This bi-fluorescent ECFP-SgsE-YFP tandem fusion protein was able to reassemble on solid surfaces. The remarkable combination of fluorescence and self-assembly and the design of bi-functional S-layer tandem fusion protein matrices makes them to a promising tool in nanobiotechnology. (author)

  7. The Formin Diaphanous Regulates Myoblast Fusion through Actin Polymerization and Arp2/3 Regulation.

    Science.gov (United States)

    Deng, Su; Bothe, Ingo; Baylies, Mary K

    2015-08-01

    The formation of multinucleated muscle cells through cell-cell fusion is a conserved process from fruit flies to humans. Numerous studies have shown the importance of Arp2/3, its regulators, and branched actin for the formation of an actin structure, the F-actin focus, at the fusion site. This F-actin focus forms the core of an invasive podosome-like structure that is required for myoblast fusion. In this study, we find that the formin Diaphanous (Dia), which nucleates and facilitates the elongation of actin filaments, is essential for Drosophila myoblast fusion. Following cell recognition and adhesion, Dia is enriched at the myoblast fusion site, concomitant with, and having the same dynamics as, the F-actin focus. Through analysis of Dia loss-of-function conditions using mutant alleles but particularly a dominant negative Dia transgene, we demonstrate that reduction in Dia activity in myoblasts leads to a fusion block. Significantly, no actin focus is detected, and neither branched actin regulators, SCAR or WASp, accumulate at the fusion site when Dia levels are reduced. Expression of constitutively active Dia also causes a fusion block that is associated with an increase in highly dynamic filopodia, altered actin turnover rates and F-actin distribution, and mislocalization of SCAR and WASp at the fusion site. Together our data indicate that Dia plays two roles during invasive podosome formation at the fusion site: it dictates the level of linear F-actin polymerization, and it is required for appropriate branched actin polymerization via localization of SCAR and WASp. These studies provide new insight to the mechanisms of cell-cell fusion, the relationship between different regulators of actin polymerization, and invasive podosome formation that occurs in normal development and in disease.

  8. The Formin Diaphanous Regulates Myoblast Fusion through Actin Polymerization and Arp2/3 Regulation.

    Directory of Open Access Journals (Sweden)

    Su Deng

    2015-08-01

    Full Text Available The formation of multinucleated muscle cells through cell-cell fusion is a conserved process from fruit flies to humans. Numerous studies have shown the importance of Arp2/3, its regulators, and branched actin for the formation of an actin structure, the F-actin focus, at the fusion site. This F-actin focus forms the core of an invasive podosome-like structure that is required for myoblast fusion. In this study, we find that the formin Diaphanous (Dia, which nucleates and facilitates the elongation of actin filaments, is essential for Drosophila myoblast fusion. Following cell recognition and adhesion, Dia is enriched at the myoblast fusion site, concomitant with, and having the same dynamics as, the F-actin focus. Through analysis of Dia loss-of-function conditions using mutant alleles but particularly a dominant negative Dia transgene, we demonstrate that reduction in Dia activity in myoblasts leads to a fusion block. Significantly, no actin focus is detected, and neither branched actin regulators, SCAR or WASp, accumulate at the fusion site when Dia levels are reduced. Expression of constitutively active Dia also causes a fusion block that is associated with an increase in highly dynamic filopodia, altered actin turnover rates and F-actin distribution, and mislocalization of SCAR and WASp at the fusion site. Together our data indicate that Dia plays two roles during invasive podosome formation at the fusion site: it dictates the level of linear F-actin polymerization, and it is required for appropriate branched actin polymerization via localization of SCAR and WASp. These studies provide new insight to the mechanisms of cell-cell fusion, the relationship between different regulators of actin polymerization, and invasive podosome formation that occurs in normal development and in disease.

  9. Commercial application of laser fusion

    International Nuclear Information System (INIS)

    The fundamentals of laser-induced fusion, some laser-fusion reactor concepts, and attendant means of utilizing the thermonuclear energy for commercial electric power generation are discussed. Theoretical fusion-pellet microexplosion energy release characteristics are described and the effects of pellet design options on pellet-microexplosion characteristics are discussed. The results of analyses to assess the engineering feasibility of reactor cavities for which protection of cavity components is provided either by suitable ablative materials or by diversion of plasmas by magnetic fields are presented. Two conceptual laser-fusion electric generating stations, based on different laser-fusion reactor concepts, are described

  10. Stau-catalyzed Nuclear Fusion

    OpenAIRE

    Hamaguchi, K.; Hatsuda, T.(Theoretical Research Division, Nishina Center, RIKEN, Saitama, 351-0198, Japan); Yanagida, T. T.

    2006-01-01

    We point out that the stau may play a role of a catalyst for nuclear fusions if the stau is a long-lived particle as in the scenario of gravitino dark matter. In this letter, we consider d d fusion under the influence of stau where the fusion is enhanced because of a short distance between the two deuterons. We find that one chain of the d d fusion may release an energy of O(10) GeV per stau. We discuss problems of making the stau-catalyzed nuclear fusion of practical use with the present tec...

  11. Enhanced image capture through fusion

    Science.gov (United States)

    Burt, Peter J.; Hanna, Keith; Kolczynski, Raymond J.

    1993-01-01

    Image fusion may be used to combine images from different sensors, such as IR and visible cameras, to obtain a single composite with extended information content. Fusion may also be used to combine multiple images from a given sensor to form a composite image in which information of interest is enhanced. We present a general method for performing image fusion and show that this method is effective for diverse fusion applications. We suggest that fusion may provide a powerful tool for enhanced image capture with broad utility in image processing and computer vision.

  12. Controlled fusion and plasma physics

    CERN Document Server

    Miyamoto, Kenro

    2006-01-01

    Resulting from ongoing, international research into fusion processes, the International Tokamak Experimental Reactor (ITER) is a major step in the quest for a new energy source.The first graduate-level text to cover the details of ITER, Controlled Fusion and Plasma Physics introduces various aspects and issues of recent fusion research activities through the shortest access path. The distinguished author breaks down the topic by first dealing with fusion and then concentrating on the more complex subject of plasma physics. The book begins with the basics of controlled fusion research, foll

  13. Fusion Probability in Dinuclear System

    CERN Document Server

    Hong, Juhee

    2015-01-01

    Fusion can be described by the time evolution of a dinuclear system with two degrees of freedom, the relative motion and transfer of nucleons. In the presence of the coupling between two collective modes, we solve the Fokker-Planck equation in a locally harmonic approximation. The potential of a dinuclear system has the quasifission barrier and the inner fusion barrier, and the escape rates can be calculated by the Kramers' model. To estimate the fusion probability, we calculate the quasifission rate and the fusion rate. We investigate the coupling effects on the fusion probability and the cross section of evaporation residue.

  14. Structural materials for fusion magnets

    International Nuclear Information System (INIS)

    Of major technical and cost impact to Magnetic Fusion Energy development are the materials for the magnet structure. Those materials and fabrication techniques that are attractive to fusion magnets are discussed and relative comparisons made. Considerations such as strength, toughness, and joining techniques are balanced against recommended design criteria to reach an optimum design. Several examples of material selection are cited for large fusion magnets such as Base II, the Mirror Fusion Test Facility, the Toroidal Fusion Test Facility, and the Large Coil Project

  15. Analysis of tracking and identification characteristics of diverse systems and data sources for sensor fusion

    OpenAIRE

    Wilson, Dean A.

    2001-01-01

    In the Command and Control mission, new technologies such as 'sensor fusion' are designed to help reduce operator workload and increase situational awareness. This thesis explored the tracking characteristics of diverse sensors and sources of data and their contributions to a fused tactical picture. The fundamental building blocks of any sensor fusion algorithm are the tracking algorithm associated with each of the sensors on the sensor platform. In support of this study the MATLAB program 'f...

  16. One-Block CYRCA: an automated procedure for identifying multiple-block alignments from single block queries

    OpenAIRE

    Frenkel-Morgenstern, Milana; Singer, Alice; Bronfeld, Hagit; Pietrokovski, Shmuel

    2005-01-01

    One-Block CYRCA is an automated procedure for identifying multiple-block alignments from single block queries (). It is based on the LAMA and CYRCA block-to-block alignment methods. The procedure identifies whether the query blocks can form new multiple-block alignments (block sets) with blocks from a database or join pre-existing database block sets. Using pre-computed LAMA block alignments and CYRCA sets from the Blocks database reduces the computation time. LAMA and CYRCA are highly sensit...

  17. Recent ATR and fusion algorithm improvements for multiband sonar imagery

    Science.gov (United States)

    Aridgides, Tom; Fernández, Manuel

    2009-05-01

    An improved automatic target recognition processing string has been developed. The overall processing string consists of pre-processing, subimage adaptive clutter filtering, normalization, detection, data regularization, feature extraction, optimal subset feature selection, feature orthogonalization and classification processing blocks. The objects that are classified by the 3 distinct ATR strings are fused using the classification confidence values and their expansions as features, and using "summing" or log-likelihood-ratio-test (LLRT) based fusion rules. The utility of the overall processing strings and their fusion was demonstrated with new high-resolution three-frequency band sonar imagery. The ATR processing strings were individually tuned to the corresponding three-frequency band data, making use of the new processing improvement, data regularization; this improvement entails computing the input data mean, clipping the data to a multiple of its mean and scaling it, prior to feature extraction and resulted in a 3:1 reduction in false alarms. Two significant fusion algorithm improvements were made. First, a nonlinear exponential Box-Cox expansion (consisting of raising data to a to-be-determined power) feature LLRT fusion algorithm was developed. Second, a repeated application of a subset Box-Cox feature selection / feature orthogonalization / LLRT fusion block was utilized. It was shown that cascaded Box-Cox feature LLRT fusion of the ATR processing strings outperforms baseline "summing" and single-stage Box-Cox feature LLRT algorithms, yielding significant improvements over the best single ATR processing string results, and providing the capability to correctly call the majority of targets while maintaining a very low false alarm rate.

  18. Development of radiation fusion biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Uhee; Lee, Ju Woon; Park, Sang Hyun

    2012-04-15

    Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready to eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. Development of modulators against degenerative aging using radiation fusion technology - Selection of 20 kinds of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling (fractionated irradiation of total 5Gy, a lapse of 4 months or more - Selection of effective aging modulating substances by screening of 800 natural substances - Development of 1 multi-functional and high-efficacy aging modulator by combination of effective substances and evaluation by in vivo models Development of biochips and kits using RI detection technology for life science - Establishment of kinase substrate interaction analysis using RI detection technique (More than 100 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing. - Establishment of multi-channel type Lab on a chip (LOC) using

  19. Physics of magnetic confinement fusion

    Directory of Open Access Journals (Sweden)

    Wagner F.

    2013-06-01

    Full Text Available Fusion is the energy source of the universe. The local conditions in the core of the Sun allow the transfer of mass into energy, which is finally released in the form of radiation. Technical fusion melts deuterons and tritons to helium releasing large amounts of energy per fusion process. Because of the conditions for fusion, which will be deduced, the fusion fuel is in the plasma state. Here we report on the confinement of fusion plasmas by magnetic fields. Different confinement concepts — tokamaks and stellarators — will be introduced and described. The first fusion reactor, ITER, and the most modern stellarator, Wendelstein 7-X, are under construction. Their basic features and objectives will be presented.

  20. The wild tapered block bootstrap

    DEFF Research Database (Denmark)

    Hounyo, Ulrich

    In this paper, a new resampling procedure, called the wild tapered block bootstrap, is introduced as a means of calculating standard errors of estimators and constructing confidence regions for parameters based on dependent heterogeneous data. The method consists in tapering each overlapping block...... of the series first, the applying the standard wild bootstrap for independent and heteroscedastic distrbuted observations to overlapping tapered blocks in an appropriate way. Its perserves the favorable bias and mean squared error properties of the tapered block bootstrap, which is the state-of-the-art block......-order asymptotic validity of the tapered block bootstrap as well as the wild tapered block bootstrap approximation to the actual distribution of the sample mean is also established when data are assumed to satisfy a near epoch dependent condition. The consistency of the bootstrap variance estimator for the sample...

  1. Characterization of fusion genes and the significantly expressed fusion isoforms in breast cancer by hybrid sequencing

    OpenAIRE

    Weirather, Jason L.; Afshar, Pegah Tootoonchi; Clark, Tyson A.; Tseng, Elizabeth; Powers, Linda S.; Underwood, Jason G; Zabner, Joseph; Korlach, Jonas; Wong, Wing Hung; Au, Kin Fai

    2015-01-01

    We developed an innovative hybrid sequencing approach, IDP-fusion, to detect fusion genes, determine fusion sites and identify and quantify fusion isoforms. IDP-fusion is the first method to study gene fusion events by integrating Third Generation Sequencing long reads and Second Generation Sequencing short reads. We applied IDP-fusion to PacBio data and Illumina data from the MCF-7 breast cancer cells. Compared with the existing tools, IDP-fusion detects fusion genes at higher precision and ...

  2. New Characterizations of Fusion Bases and Riesz Fusion Bases in Hilbert Spaces

    OpenAIRE

    Asgari, Mohammad Sadegh

    2012-01-01

    In this paper we investigate a new notion of bases in Hilbert spaces and similar to fusion frame theory we introduce fusion bases theory in Hilbert spaces. We also introduce a new definition of fusion dual sequence associated with a fusion basis and show that the operators of a fusion dual sequence are continuous projections. Next we define the fusion biorthogonal sequence, Bessel fusion basis, Hilbert fusion basis and obtain some characterizations of them. we study orthonormal fusion systems...

  3. Reduced, tame and exotic fusion systems

    DEFF Research Database (Denmark)

    Andersen, K.K.S.; Oliver, Bob; Ventura, Joana

    We define here two new classes of saturated fusion systems, reduced fusion systems and tame fusion systems. These are motivated by our attempts to better understand and search for exotic fusion systems: fusion systems which are not the fusion systems of any finite group. Our main theorems say...... that every saturated fusion system reduces to a reduced fusion system which is tame only if the original one is realizable, and that every reduced fusion system which is not tame is the reduction of some exotic (nonrealizable) fusion system....

  4. Alternate laser fusion drivers

    International Nuclear Information System (INIS)

    Over the past few years, several laser systems have been considered as possible laser fusion drivers. Recently, there has been an increasing effort to evaluate these systems in terms of a reactor driver application. The specifications for such a system have become firmer and generally more restrictive. Several of the promising candidates such as the group VI laser, the metal vapor excimers and some solid state lasers can be eliminated on the basis of inefficiency. New solid state systems may impact the long range development of a fusion driver. Of the short wavelength gas lasers, the KrF laser used in conjunction with Raman compression and pulse stacking techniques is the most promising approach. Efficiencies approaching 10% may be possible with this system. While technically feasible, these approaches are complex and costly and are unsatisfying in an aethetic sense. A search for new lasers with more compelling features is still needed

  5. Fusion theory and computations

    International Nuclear Information System (INIS)

    It is proposed to carry out theoretical studies of the equilibrium, stability, transport and heating properties of high-temperature fusion plasmas. Continued emphasis will be placed on the effective interface of fusion theory and computations with the local Alcator, Versator, Constance and Torex experimental programs. The proposed research includes but will not be limited to the following types of studies: (a) investigation of RF heating of toroidal plasmas, (b) investigation of the MHD equilibrium and stability properties of tokamak plasmas, (c) develop the basic understanding of a wide variety of non-linear and turbulent phenomena, including stochastic magnetic fields, clumps and nonlinear saturation of linear instabilities, (d) investigate the effects of ambipolar fields on transport and stability properties of toroidal plasmas. Investigate high-beat stability properties of tandem-mirror systems, and (e) investigation of the MHD equilibrium and stability properties of Torsatron/Stellarator configurations

  6. Pulsed fusion reactors

    International Nuclear Information System (INIS)

    This summer school specialized in examining specific fusion center systems. Papers on scientific feasibility are first presented: confinement of high-beta plasma, liners, plasma focus, compression and heating and the use of high power electron beams for thermonuclear reactors. As for technological feasibility, lectures were on the theta-pinch toroidal reactors, toroidal diffuse pinch, electrical engineering problems in pulsed magnetically confined reactors, neutral gas layer for heat removal, the conceptual design of a series of laser fusion power plants with ''Saturn'', implosion experiments and the problem of the targets, the high brightness lasers for plasma generation, and topping and bottoming cycles. Some problems common to pulsed reactors were examined: energy storage and transfer, thermomechanical and erosion effects in the first wall and blanket, the problems of tritium production, radiation damage and neutron activation in blankets, and the magnetic and inertial confinement

  7. Fusion technology programme

    International Nuclear Information System (INIS)

    The KfK-Association has continued work on 17 R and D contracts of the Fusion Technology Programme. An effort of 94 manyears per year is at present contributed by 10 KfK departments, covering all aereas defined in the Fusion Technology Programme. The dominant part of the work is directed towards the need of the NET design or supporting experiments. Some additional effort addresses long term technological issues and system studies relevant to DEMO or confinement schemes alternative to tokamaks. Direct contribution to the NET team has increased by augmentation of NET study contracts and delegation of personnel, three KfK delegates being at present members of the NET team. In reverse, specifications and design guidelines worked out by NET have started to have an impact on the current R and D-work in the laboratory. (orig./GG)

  8. Fusion Data Grid Service

    Science.gov (United States)

    Shasharina, Svetlana; Wang, Nanbor

    2004-11-01

    Simulations and experiments in the fusion and plasma physics community generate large datasets at remote sites. Visualization and analysis of these datasets are difficult because of the incompatibility among the various data formats adopted by simulation, experiments, and analysis tools, and the large sizes of analyzed data. Grids and Web Services technologies are capable of providing solutions for such heterogeneous settings, but need to be customized to the field-specific needs and merged with distributed technologies currently used by the community. This paper describes how we are addressing these issues in the Fusion Grid Service under development. We also present performance results of relevant data transfer mechanisms including binary SOAP, DIME, GridFTP and MDSplus and CORBA. We will describe the status of data converters (between HDF5 and MDSplus data types), developed in collaboration with MIT (J. Stillerman). Finally, we will analyze bottlenecks of MDSplus data transfer mechanism (work performed in collaboration with General Atomics (D. Schissel and M. Qian).

  9. Block Voter Model

    CERN Document Server

    Sampaio, C I N

    2011-01-01

    We introduce and study the block voter model with noise on two-dimensional square lattices using Monte Carlo simulations and finite-size scaling techniques. The model is defined by an outflow dynamics where a central set of $N_{PCS}$ spins, here denoted by persuasive cluster spins (PCS), tries to influence the opinion of their neighbouring counterparts. We consider the collective behaviour of the entire system with varying PCS size. When $N_{PCS}>2$, the system exhibits an order-disorder phase transition at a critical noise parameter $q_{c}$ which is a monotonically increasing function of the size of the persuasive cluster. We conclude that how large the PCS is more power of persuasion it has. It also seems that the resulting critical behaviour is Ising-like independent of the range of the interactions.

  10. Spintronics: Conceptual Building Blocks

    Science.gov (United States)

    Ansermet, J.-Ph.

    The purpose of this introduction to spintronics is to provide some elementary description of its conceptual building blocks. Thus, it is intended for a newcomer to the field. After recalling rudimentary descriptions of spin precession and spin relaxation, spin-dependent transport is treated within the Boltzmann formalism. This suffices to introduce key notions such as the spin asymmetry of the conductivities in the two-current model, the spin diffusion length, and spin accumulation. Two basic mechanisms of spin relaxation are then presented, one arising from spin-orbit scattering and the other from electron-magnon collisions. Finally, the action of a spin-polarized current on magnetization is presented in a thermodynamics framework. This introduces the notion of spin torque and the characteristic length scale over which the transverse spin polarization of conduction electron decays as it is injected into a magnet.

  11. Photovoltaic building blocks

    DEFF Research Database (Denmark)

    Hanberg, Peter Jesper; Jørgensen, Anders Michael

    2014-01-01

    it directcompetitive with fossil energy sources a further reduction is needed. By increasing the efficiency of the solar cells one gain an advantage through the whole chain of cost. So that per produced Watt of power less material is spent, installation costs are lower, less area is used etc. With an average...... efficiency of about 15% for commercial Silicon solar cells there is still much to gain. DTU Danchip provides research facilities, equipment and expertise for the building blocks that comprises fabricating the efficient solar cell. In order to get more of the sun light into the device we provide thin film......Photovoltaics (PV), better known as solar cells, are now a common day sight on many rooftops in Denmark.The installed capacity of PV systems worldwide is growing exponentially1 and is the third most importantrenewable energy source today. The cost of PV is decreasing fast with ~10%/year but to make...

  12. Atomic Basic Blocks

    Science.gov (United States)

    Scheler, Fabian; Mitzlaff, Martin; Schröder-Preikschat, Wolfgang

    Die Entscheidung, einen zeit- bzw. ereignisgesteuerten Ansatz für ein Echtzeitsystem zu verwenden, ist schwierig und sehr weitreichend. Weitreichend vor allem deshalb, weil diese beiden Ansätze mit äußerst unterschiedlichen Kontrollflussabstraktionen verknüpft sind, die eine spätere Migration zum anderen Paradigma sehr schwer oder gar unmöglich machen. Wir schlagen daher die Verwendung einer Zwischendarstellung vor, die unabhängig von der jeweils verwendeten Kontrollflussabstraktion ist. Für diesen Zweck verwenden wir auf Basisblöcken basierende Atomic Basic Blocks (ABB) und bauen darauf ein Werkzeug, den Real-Time Systems Compiler (RTSC) auf, der die Migration zwischen zeit- und ereignisgesteuerten Systemen unterstützt.

  13. Confidence driven TGV fusion

    OpenAIRE

    Ntouskos, Valsamis; Pirri, Fiora

    2016-01-01

    We introduce a novel model for spatially varying variational data fusion, driven by point-wise confidence values. The proposed model allows for the joint estimation of the data and the confidence values based on the spatial coherence of the data. We discuss the main properties of the introduced model as well as suitable algorithms for estimating the solution of the corresponding biconvex minimization problem and their convergence. The performance of the proposed model is evaluated considering...

  14. [Fusion energy research

    International Nuclear Information System (INIS)

    This report discusses the following topics: principal parameters achieved in experimental devices (FY88); tokamak fusion test reactor; Princeton beta Experiment-Modification; S-1 Spheromak; current drive experiment; x-ray laser studies; spacecraft glow experiment; plasma deposition and etching of thin films; theoretical plasma; tokamak modeling; compact ignition tokamak; international thermonuclear experimental reactor; Engineering Department; Project Planning and Safety Office; quality assurance and reliability; and technology transfer

  15. Heavy ion fusion III

    International Nuclear Information System (INIS)

    This report updates Heavy Ion Fusion, JSR-82-302, dated January, 1983. During the last four years, program management and direction has been changed and the overall Inertial Confinement Program has been reviewed. This report therefore concentrates on accelerator physics issues, how the program has addressed those issues during the last four years, and how it will be addressing them in the future. 8 refs., 3 figs

  16. Posterior instrumentation and fusion

    OpenAIRE

    Deniz Olgun, Z.; Yazici, Muharrem

    2012-01-01

    The purpose of surgery for adolescent idiopathic scoliosis, which characteristically includes thoracic hypokyphosis and all three columns of the spine, is the achievement of a balanced spine while preserving as many motion segments as possible and avoiding neurologic damage. Many approaches have been defined in the treatment of this common disease. Posterior-only surgery, instrumentation and fusion have become the preferred technique in many centers throughout the world due to simplicity of a...

  17. Fusion Reactor Materials

    International Nuclear Information System (INIS)

    SCK-CEN's programme on fusion reactor materials includes studies (1) to investigate fracture mechanics of neutron-irradiated beryllium; (2) to describe the helium behaviour in irradiated beryllium at atomic scale; (3) to define the kinetics of beryllium reacting with air or steam; (3) to perform a feasibility study for the testing of integrated blanket modules under neutron irradiation. Progress and achievements in 1997 are reported

  18. Fusion development and technology

    International Nuclear Information System (INIS)

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R ampersand D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development

  19. (Fusion energy research)

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, C.A. (ed.)

    1988-01-01

    This report discusses the following topics: principal parameters achieved in experimental devices (FY88); tokamak fusion test reactor; Princeton beta Experiment-Modification; S-1 Spheromak; current drive experiment; x-ray laser studies; spacecraft glow experiment; plasma deposition and etching of thin films; theoretical plasma; tokamak modeling; compact ignition tokamak; international thermonuclear experimental reactor; Engineering Department; Project Planning and Safety Office; quality assurance and reliability; and technology transfer.

  20. Future of fusion implementation

    International Nuclear Information System (INIS)

    For fusion to become available for commercial use in the 21st century, R and D must be undertaken now. But it is hard to justify these expenditures with a cost/benefit oriented assessment methodology, because of both the time-frame and the uncertainty of the future benefits. Focusing on the factors most relevant for current consideration of fusion's commercial prospects, i.e., consumption levels and the outcomes for fission, solar, and coal, many possible futures of the US energy system are posited and analyzed under various assumptions about costs. The Reference Energy System approach was modified to establish both an appropriate degree of detail and explicit time dependence, and a computer code used to organize the relevant data and to perform calculations of system cost (annual and discounted present value), resource use, and residuals that are implied by the consumptions levels and technology mix in each scenario. Not unreasonable scenarios indicate benefits in the form of direct cost savings, which may well exceed R and D costs, which could be attributed to the implementation of fusion

  1. Solenoidal fusion system

    International Nuclear Information System (INIS)

    This invention discloses apparatus and methods to produce nuclear fusion utilizing fusible material in the form of high energy ion beams confined in magnetic fields. For example, beams of deuterons and tritons are injected in the same direction relative to the axis of a vacuum chamber. The ion beams are confined by the magnetic fields of long solenoids. The products of the fusion reactions, such as neutrons and alpha particles, escape to the wall surrounding the vacuum chamber, producing heat. The momentum of the deuterons is approximately equal to the momentum of the tritons, so that both types of ions follow the same path in the confining magnetic field. The velocity of the deuteron is sufficiently greater than the velocity of the triton so that overtaking collisions occur at a relative velocity which produces a high fusion reaction cross section. Electrons for space charge neutralization are obtained by ionization of residual gas in the vacuum chamber, and additionally from solid material (Irradiated with ultra-violet light or other energetic radiation) adjacent to the confinement region. For start-up operation, injected high-energy molecular ions can be dissociated by intense laser beam, producing trapping via change of charge state. When sufficiently intense deuteron and triton beams have been produced, the laser beam can be removed, and subsequent change of charge state can be achieved by collisions

  2. Migma fusion reactor

    International Nuclear Information System (INIS)

    Collisions of atomic and molecular ions of like charge are produced in a device including a magnetic field which decreases with the radial distance from its central axis and increases with the distance along the central axis from its center plane. Injected accelerated ion beams are mixed in an organized manner in precessing orbits designed to make them collide head-on or nearly so in the central region of the device continuously and automatically. Ions that have not undergone fusion are continuously and automatically returned by the field to the collision region. The collision probability is further increased by accelerating (rather than heating) the ions to an energy at which the reaction parameter (the product of the fusion cross-secton and the relative ion velocity) is maximized. The atomic nuclei are confined in the device by 'self-trapping' processes. By limiting the injection energy of deuterons to a particular range, it is possible to achieve a breeding effect. Means are presented to maintain the density of the organized ion mixture along with a geometrical configuration of the magnetic field-producing coils and the external electrical fields in such a manner that the charged nuclei resulting from the fusion reactions may have their energy directly converted into electric energy by a decelerating electric potential outside the magnetic field. (LL)

  3. Stabilized Spheromak Fusion Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, T

    2007-04-03

    The U.S. fusion energy program is focused on research with the potential for studying plasmas at thermonuclear temperatures, currently epitomized by the tokamak-based International Thermonuclear Experimental Reactor (ITER) but also continuing exploratory work on other plasma confinement concepts. Among the latter is the spheromak pursued on the SSPX facility at LLNL. Experiments in SSPX using electrostatic current drive by coaxial guns have now demonstrated stable spheromaks with good heat confinement, if the plasma is maintained near a Taylor state, but the anticipated high current amplification by gun injection has not yet been achieved. In future experiments and reactors, creating and maintaining a stable spheromak configuration at high magnetic field strength may require auxiliary current drive using neutral beams or RF power. Here we show that neutral beam current drive soon to be explored on SSPX could yield a compact spheromak reactor with current drive efficiency comparable to that of steady state tokamaks. Thus, while more will be learned about electrostatic current drive in coming months, results already achieved in SSPX could point to a productive parallel development path pursuing auxiliary current drive, consistent with plans to install neutral beams on SSPX in the near future. Among possible outcomes, spheromak research could also yield pulsed fusion reactors at lower capital cost than any fusion concept yet proposed.

  4. Heavy ion fusion

    International Nuclear Information System (INIS)

    With controlled thermonuclear fusion holding out the possibility of a prolific and clean new source of energy, the goal remains elusive after many years of continual effort. While the conventional Tokamak route with magnetic confinement continues to hit the headlines, other alternatives are now becoming competitive. One possible solution is to confine the thermonuclear fuel pellet by high power beams. Current research and perspectives for future work in such inertial confinement was the subject of the 'Prospects for Heavy Ion Fusion' European Research Conference held in Aghia Pelaghia, Crete, last year. Its main focus was on the potential of heavy ion accelerators as well as recent advances in target physics with high power lasers and light ion beams. Carlo Rubbia declared that high energy accelerators, with their high efficiency, are the most promising approach to economical fusion energy production. However the need for cost saving in the driver accelerator requires new ideas in target design tailored to the particularities of heavy ion beams, which need to be pushed to the limits of high current and phase space density at the same time

  5. Fusion engineering design center

    International Nuclear Information System (INIS)

    In the spring of 1985, the Department of Energy (DOE) directed the Design Center to take a lead responsibility in assessing the engineering feasibility of a very compact tokamak experiment with copper coils. Following this assessment, the Design Center studied the Ignitor concept at the request of DOE and arrived at a design configuration. Many features of this configuration have been incorporated into the national baseline conceptual design for a Compact Ignition Tokamak (CIT). The Design Center continued to participate in the mirror program by contributing to the Minimars design effort, a two-year program to develop and describe an attractive tandem mirror reactor concept. The Design Center's principal role is in configuration definition of the candidate concepts. The Design Center continues to lead the engineering activities for the International Tokamak Reactor program. Advanced commercial tokamaks were studied by the Design Center as part of the Tokamak Power Systems Studies project coordinated by the DOE Office of Fusion Energy. The Design Center also provided design integration of the US effort. A cost accounting system that is applicable to all magnetic fusion reactor design studies was developed and applied to different confinement concepts and types of projects. The system provides the structure for development of a fusion cost database and validated cost estimating procedures

  6. Superconductivity for mirror fusion

    International Nuclear Information System (INIS)

    Mirror experiments have led the way in applying superconductivity to fusion research because of unique requirements for high and steady magnetic fields. The first significant applications were Baseball II at LLL and IMP at ORNL, which used multifilamentary niobium--titanium and niobium--tin tape, respectively. Now the USSR at Kurchatov is building a smaller baseball coil with a 6.5 mm square multifilamentary niobium--titanium superconductor similar to the Baseball II conductor. However, the largest advance in fusion magnets will be used in the Mirror Fusion Test Facility (MFTF) now under construction at LLL. Improvements in the technology of the previous LLL experiment, Baseball II, have been made using new conductor joining techniques, a ventilated wrap-around copper stabilizer, and stronger structural welding methods. The MFTF coil winding is proceeding on a separate former to allow parallel construction of the main structure. Not only does this shorten the project schedule to equal that of other conventional constructions, but a second vacuum barrier is created between the magnet helium and the plasma environment for reliable operation

  7. Active inhibition of herpes simplex virus type 1-induced cell fusion

    Energy Technology Data Exchange (ETDEWEB)

    Bzik, D.J.; Person, S.; Read, G.S.

    1982-01-01

    Previous studies have demonstrated that syn mutant-infected cells fuse less well with nonsyncytial virus-infected cells than with uninfected cells, a phenomenon defined as function inhibition. The present study characterizes the kinetics as well as the requirements for expression of fusion inhibition. Initially, the capacity of sparse syn mutant-infected cells to fuse with uninfected surrounding cells was determined throughout infection. Of seven syn mutants examined, including representatives with alterations in two different viral genes that affect cell fusion, all showed an increase in fusion capacity up to 12 hr after infection and a decrease at later times. Fusion inhibition was examined in experiments employing sparse syn20-infected cells which had been incubated to a maximum fusion capacity; it was shown that surrounding cells infected with KOS, the parent of syn20, began to inhibit fusion by the syn20-infected cells at about 4 hr after infection, and that the maximum ability to inhibit fusion was attained at about 6 hr after infection. The metabolic blocking agents actinomycin D (RNA), cycloheximide (protein), 2-deoxyglucose, and tunicamycin (glycoslyation of glycoproteins) all showed the ability to inhibit the expression of fusion inhibition by KOS-infected cells if added shortly after infection. It is concluded that fusion inhibition is an active process that requires the synthesis of RNA, proteins, and glycoproteins. 17 references, 3 figures, 2 tables.

  8. Menin-MLL inhibitors reverse oncogenic activity of MLL fusion proteins in leukemia.

    Science.gov (United States)

    Grembecka, Jolanta; He, Shihan; Shi, Aibin; Purohit, Trupta; Muntean, Andrew G; Sorenson, Roderick J; Showalter, Hollis D; Murai, Marcelo J; Belcher, Amalia M; Hartley, Thomas; Hess, Jay L; Cierpicki, Tomasz

    2012-03-01

    Translocations involving the mixed lineage leukemia (MLL) gene result in human acute leukemias with very poor prognosis. The leukemogenic activity of MLL fusion proteins is critically dependent on their direct interaction with menin, a product of the multiple endocrine neoplasia (MEN1) gene. Here we present what are to our knowledge the first small-molecule inhibitors of the menin-MLL fusion protein interaction that specifically bind menin with nanomolar affinities. These compounds effectively reverse MLL fusion protein-mediated leukemic transformation by downregulating the expression of target genes required for MLL fusion protein oncogenic activity. They also selectively block proliferation and induce both apoptosis and differentiation of leukemia cells harboring MLL translocations. Identification of these compounds provides a new tool for better understanding MLL-mediated leukemogenesis and represents a new approach for studying the role of menin as an oncogenic cofactor of MLL fusion proteins. Our findings also highlight a new therapeutic strategy for aggressive leukemias with MLL rearrangements.

  9. The Block-block Bootstrap: Improved Asymptotic Refinements

    OpenAIRE

    Donald W.K. Andrews

    2002-01-01

    The asymptotic refinements attributable to the block bootstrap for time series are not as large as those of the nonparametric iid bootstrap or the parametric bootstrap. One reason is that the independence between the blocks in the block bootstrap sample does not mimic the dependence structure of the original sample. This is the join-point problem. In this paper, we propose a method of solving this problem. The idea is not to alter the block bootstrap. Instead, we alter the original sample sta...

  10. Convergence rates of empirical block length selectors for block bootstrap

    OpenAIRE

    Nordman, Daniel J.; Lahiri, Soumendra N.

    2014-01-01

    We investigate the accuracy of two general non-parametric methods for estimating optimal block lengths for block bootstraps with time series – the first proposed in the seminal paper of Hall, Horowitz and Jing (Biometrika 82 (1995) 561–574) and the second from Lahiri et al. (Stat. Methodol. 4 (2007) 292–321). The relative performances of these general methods have been unknown and, to provide a comparison, we focus on rates of convergence for these block length selectors for the moving block ...

  11. Fusion roadmap in Korea

    International Nuclear Information System (INIS)

    The KSTAR (Korea Superconducting Tokamak Advanced Research) project started in 1995 as a first major step of “National Fusion Energy Development Plan” and, as a following step, Korea joined the ITER program. Korean Fusion Energy Development Promotion Law (FEDPL) was enacted in 2007 to promote a long-term cooperative fusion research and development among participating industries, universities and research institutes. And a conceptual design study for a steady-state Korean fusion demonstration reactor (K-DEMO) has been initiated in 2012 and “the Report on K-DEMO R and D Plan” was submitted to the Government of Korea in 2013. One special concept of K-DEMO is a two-staged development plan. At first, K-DEMO is designed to demonstrate a net electricity generation (Qeng > 1) and a self-sustained tritium cycle (Tritium breeding ratio, TBR > 1.05), and it is also designed to be used as a component test facility. Then, at its second stage, a major upgrade is carried out by replacing in-vessel components and the net electric generation shall be on the order of 500 MWe. After a thorough 0-D system analysis, the major radius and minor radius are chosen to be 6.8 m and 2.1 m, respectively, considering practical engineering feasibilities. In order to minimize the deflection of wave and maximize the efficiency, a top launch high frequency (> 200 GHz) electron cyclotron current drive (ECCD) system is considered and, for matching the high frequency ECCD, a high magnetic field is required and the peak magnetic field can approach to 16 T with the magnetic field at the plasma center above 7 T. K-DEMO incorporates a vertical maintenance design. Pressurized water is the most prominent choice for the main coolant of K-DEMO when considering balance of plant development details. Considering the plasma performance and the peak heat flux in the divertor system, a conventional W-type double-null divertor system becomes the reference choice of K-DEMO. The current status on the KSTAR

  12. The challenges of fusion

    International Nuclear Information System (INIS)

    The new boss of the world's biggest fusion experiment cannot afford to fail. Kaname Ikeda will soon be a name on many physicists' lips. Though the outgoing Japanese ambassador to Croatia and former science administrator is not currently widely known, that will all change when he starts work later this month as director general of the International Thermonuclear Experimental Reactor (ITER). Set to be built at Cadarache near Marseille in southern France - assuming the ITER treaty is ratified - this Euro10bn facility is designed to show that fusion could be turned into a practical energy source.To do so would be huge achievement. Fusion reactors could play a massive role in meeting the world's rapidly growing demand for energy. They promise to be environmentally friendly and relatively safe to operate, while the raw materials they need are plentiful. However, early progress in fusion research led plasma physicists to be over optimistic about this energy source, and a commercial fusion plant remains as far off in the future as it was back in the 1970s. Ikeda therefore has a tough job on his hands, as he readily admits in our interview with him (see p12; print version only). It will be no mean feat to build ITER on time and to budget, and Ikeda will have to draw heavily on his undoubted diplomatic skills to ensure that everyone involved in this complex international project gets on. ITER is hugely ambitious in engineering terms, with vast superconducting magnets needed to confine a deuterium-tritium plasma within a doughnut-shaped 'tokamak' vessel. Numerous technical challenges will have to be addressed to ensure ITER fulfils its goal of releasing more energy than it consumes. These include choosing which material to line the inner wall of the tokamak with, overcoming the accumulation of radioactive tritium on this surface, and controlling the properties of the plasma. Fortunately, such issues are being addressed at the recently upgraded Joint European Torus near Oxford

  13. Large Block Test Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lin, W

    2001-12-01

    This report documents the Large-Block Test (LBT) conducted at Fran Ridge near Yucca Mountain, Nevada. The LBT was a thermal test conducted on an exposed block of middle non-lithophysal Topopah Spring tuff (Tptpmn) and was designed to assist in understanding the thermal-hydrological-mechanical-chemical (THMC) processes associated with heating and then cooling a partially saturated fractured rock mass. The LBT was unique in that it was a large (3 x 3 x 4.5 m) block with top and sides exposed. Because the block was exposed at the surface, boundary conditions on five of the six sides of the block were relatively well known and controlled, making this test both easier to model and easier to monitor. This report presents a detailed description of the test as well as analyses of the data and conclusions drawn from the test. The rock block that was tested during the LBT was exposed by excavation and removal of the surrounding rock. The block was characterized and instrumented, and the sides were sealed and insulated to inhibit moisture and heat loss. Temperature on the top of the block was also controlled. The block was heated for 13 months, during which time temperature, moisture distribution, and deformation were monitored. After the test was completed and the block cooled down, a series of boreholes were drilled, and one of the heater holes was over-cored to collect samples for post-test characterization of mineralogy and mechanical properties. Section 2 provides background on the test. Section 3 lists the test objectives and describes the block site, the site configuration, and measurements made during the test. Section 3 also presents a chronology of events associated with the LBT, characterization of the block, and the pre-heat analyses of the test. Section 4 describes the fracture network contained in the block. Section 5 describes the heating/cooling system used to control the temperature in the block and presents the thermal history of the block during the test

  14. Inertial fusion energy; L'energie de fusion inertielle

    Energy Technology Data Exchange (ETDEWEB)

    Decroisette, M.; Andre, M.; Bayer, C.; Juraszek, D. [CEA Bruyeres-le-Chatel, Dir. des Systemes d' Information (CEA/DIF), 91 (France); Le Garrec, B. [CEA Centre d' Etudes Scientifiques et Techniques d' Aquitaine, 33 - Le Barp (France); Deutsch, C. [Paris-11 Univ., 91 - Orsay (France); Migus, A. [Institut d' Optique Centre scientifique, 91 - Orsay (France)

    2005-07-01

    We first recall the scientific basis of inertial fusion and then describe a generic fusion reactor with the different components: the driver, the fusion chamber, the material treatment unit, the target factory and the turbines. We analyse the options proposed at the present time for the driver and for target irradiation scheme giving the state of art for each approach. We conclude by the presentation of LMJ (laser Megajoule) and NIF (national ignition facility) projects. These facilities aim to demonstrate the feasibility of laboratory DT ignition, first step toward Inertial Fusion Energy. (authors)

  15. Recent fusion research in the National Institute for Fusion Science

    International Nuclear Information System (INIS)

    The National Institute for Fusion Science (NIFS), which was established in 1989, promotes academic approaches toward the exploration of fusion science for steady-state helical reactor and realizes the establishment of a comprehensive understanding of toroidal plasmas as an inter-university research organization and a key center of worldwide fusion research. The Large Helical Device (LHD) Project, the Numerical Simulation Science Project, and the Fusion Engineering Project are organized for early realization of net current free fusion reactor, and their recent activities are described in this paper. The LHD has been producing high-performance plasmas comparable to those of large tokamaks, and several new findings with regard to plasma physics have been obtained. The numerical simulation science project contributes understanding and systemization of the physical mechanisms of plasma confinement in fusion plasmas and explores complexity science of a plasma for realization of the numerical test reactor. In the fusion engineering project, the design of the helical fusion reactor has progressed based on the development of superconducting coils, the blanket, fusion materials and tritium handling. (author)

  16. LegC3, an effector protein from Legionella pneumophila, inhibits homotypic yeast vacuole fusion in vivo and in vitro.

    Directory of Open Access Journals (Sweden)

    Terry L Bennett

    Full Text Available During infection, the intracellular pathogenic bacterium Legionella pneumophila causes an extensive remodeling of host membrane trafficking pathways, both in the construction of a replication-competent vacuole comprised of ER-derived vesicles and plasma membrane components, and in the inhibition of normal phagosome:endosome/lysosome fusion pathways. Here, we identify the LegC3 secreted effector protein from L. pneumophila as able to inhibit a SNARE- and Rab GTPase-dependent membrane fusion pathway in vitro, the homotypic fusion of yeast vacuoles (lysosomes. This vacuole fusion inhibition appeared to be specific, as similar secreted coiled-coiled domain containing proteins from L. pneumophila, LegC7/YlfA and LegC2/YlfB, did not inhibit vacuole fusion. The LegC3-mediated fusion inhibition was reversible by a yeast cytosolic extract, as well as by a purified soluble SNARE, Vam7p. LegC3 blocked the formation of trans-SNARE complexes during vacuole fusion, although we did not detect a direct interaction of LegC3 with the vacuolar SNARE protein complexes required for fusion. Additionally, LegC3 was incapable of inhibiting a defined synthetic model of vacuolar SNARE-driven membrane fusion, further suggesting that LegC3 does not directly inhibit the activity of vacuolar SNAREs, HOPS complex, or Sec17p/18p during membrane fusion. LegC3 is likely utilized by Legionella to modulate eukaryotic membrane fusion events during pathogenesis.

  17. The tumorigenic FGFR3-TACC3 gene fusion escapes miR-99a regulation in glioblastoma

    Science.gov (United States)

    Parker, Brittany C.; Annala, Matti J.; Cogdell, David E.; Granberg, Kirsi J.; Sun, Yan; Ji, Ping; Li, Xia; Gumin, Joy; Zheng, Hong; Hu, Limei; Yli-Harja, Olli; Haapasalo, Hannu; Visakorpi, Tapio; Liu, Xiuping; Liu, Chang-gong; Sawaya, Raymond; Fuller, Gregory N.; Chen, Kexin; Lang, Frederick F.; Nykter, Matti; Zhang, Wei

    2013-01-01

    Fusion genes are chromosomal aberrations that are found in many cancers and can be used as prognostic markers and drug targets in clinical practice. Fusions can lead to production of oncogenic fusion proteins or to enhanced expression of oncogenes. Several recent studies have reported that some fusion genes can escape microRNA regulation via 3′–untranslated region (3′-UTR) deletion. We performed whole transcriptome sequencing to identify fusion genes in glioma and discovered FGFR3-TACC3 fusions in 4 of 48 glioblastoma samples from patients both of mixed European and of Asian descent, but not in any of 43 low-grade glioma samples tested. The fusion, caused by tandem duplication on 4p16.3, led to the loss of the 3′-UTR of FGFR3, blocking gene regulation of miR-99a and enhancing expression of the fusion gene. The fusion gene was mutually exclusive with EGFR, PDGFR, or MET amplification. Using cultured glioblastoma cells and a mouse xenograft model, we found that fusion protein expression promoted cell proliferation and tumor progression, while WT FGFR3 protein was not tumorigenic, even under forced overexpression. These results demonstrated that the FGFR3-TACC3 gene fusion is expressed in human cancer and generates an oncogenic protein that promotes tumorigenesis in glioblastoma. PMID:23298836

  18. Covariant Approaches to Superconformal Blocks

    CERN Document Server

    Fitzpatrick, A Liam; Khandker, Zuhair U; Li, Daliang; Poland, David; Simmons-Duffin, David

    2014-01-01

    We develop techniques for computing superconformal blocks in 4d superconformal field theories. First we study the super-Casimir differential equation, deriving simple new expressions for superconformal blocks for 4-point functions containing chiral operators in theories with N-extended supersymmetry. We also reproduce these results by extending the "shadow formalism" of Ferrara, Gatto, Grillo, and Parisi to supersymmetric theories, where superconformal blocks can be represented as superspace integrals of three-point functions multiplied by shadow three-point functions.

  19. Dimensional Reduction for Conformal Blocks

    CERN Document Server

    Hogervorst, Matthijs

    2016-01-01

    We consider the dimensional reduction of a CFT, breaking multiplets of the d-dimensional conformal group SO(d+1,1) up into multiplets of SO(d,1). This leads to an expansion of d-dimensional conformal blocks in terms of blocks in d-1 dimensions. In particular, we obtain a formula for 3d conformal blocks as an infinite sum over 2F1 hypergeometric functions with closed-form coefficients.

  20. Binding Blocks: building the Universe one nucleus at the time

    CERN Document Server

    Diget, C Aa; Leech, K; Haylett, T; Lock, S; Sanders, T; Shelley, M; Willett, H V; Keegans, J; Sinclair, L; Simpson, E C

    2016-01-01

    We present a new teaching and outreach activity based around the construction of a three-dimensional chart of isotopes using LEGO$^{\\copyright}$ bricks. The activity, \\emph{Binding Blocks}, demonstrates nuclear and astrophysical processes through a seven-meter chart of all nuclear isotopes, built from over 26,000 LEGO$^{\\copyright}$ bricks. It integrates A-level and GCSE curricula across areas of nuclear physics, astrophysics, and chemistry, including: nuclear decays (through the colours in the chart); nuclear binding energy (through tower heights); production of chemical elements in the cosmos; fusion processes in stars and fusion energy on Earth; as well as links to medical physics, particularly diagnostics and radiotherapy.

  1. Is fusion research worth it?

    International Nuclear Information System (INIS)

    Long-term energy R and D such as fusion needs to be valued as a 'real option'. The R and D itself does not provide energy, but rather the option to construct and operate energy-producing systems. An initial analysis of this problem [Goldenberg, Linton, Nuclear Fusion R and D, Energy Risk, 2006] used an inversion of the Black-Scholes formula to take explicit account of fluctuations in the real value of energy. That study concluded that for reasonable assumptions about the operating cost of fusion power plants, the fusion option was cost effective. Here we use a simpler estimate of the future value of energy, but look more carefully at the question of the opportunity cost of engaging in fusion R and D. We find again that fusion research is a good investment. (author)

  2. Intitutional constraints to fusion commercialization

    International Nuclear Information System (INIS)

    The major thrust of this report is that the long time frame associated with the development of commercial fusion systems in the context of the commercialization and institutional history of an allied technology, fission-power, suggests that fusion commercialization will not occur without active and broad-based support on the part of the Nation's political leaders. Its key recommendation is that DOE fusion planners devote considerable resources to analytical efforts aimed at determining the need for fusion and the timing of that need, in order to convince policymakers that they need do more than preserve fusion as an option for application at some indefinite point in the future. It is the thesis of the report that, in fact, an act of political vision on the part of the Nation's leaders will be required to accomplish fusion commercialization

  3. Reduced, tame and exotic fusion systems

    OpenAIRE

    Andersen, Kasper K. S.; Oliver, Bob; Ventura, Joana

    2010-01-01

    We define here two new classes of saturated fusion systems, reduced fusion systems and tame fusion systems. These are motivated by our attempts to better understand and search for exotic fusion systems: fusion systems which are not the fusion systems of any finite group. Our main theorems say that every saturated fusion system reduces to a reduced fusion system which is tame only if the original one is realizable, and that every reduced fusion system which is not tame is the reduction of some...

  4. Adjoint affine fusion and tadpoles

    OpenAIRE

    Urichuk, Andrew; Walton, Mark A.

    2016-01-01

    We study affine fusion with the adjoint representation. For simple Lie algebras, elementary and universal formulas determine the decomposition of a tensor product of an integrable highest-weight representation with the adjoint representation. Using the (refined) affine depth rule, we prove that equally striking results apply to adjoint affine fusion. For diagonal fusion, a coefficient equals the number of nonzero Dynkin labels of the relevant affine highest weight, minus 1. A nice lattice-pol...

  5. Adductor Canal Block versus Femoral Nerve Block and Quadriceps Strength

    DEFF Research Database (Denmark)

    Jæger, Pia Therese; Nielsen, Zbigniew Jerzy Koscielniak; Henningsen, Lene Marianne;

    2013-01-01

    : The authors hypothesized that the adductor canal block (ACB), a predominant sensory blockade, reduces quadriceps strength compared with placebo (primary endpoint, area under the curve, 0.5-6 h), but less than the femoral nerve block (FNB; secondary endpoint). Other secondary endpoints were...

  6. EURATOM strategy towards fusion energy

    International Nuclear Information System (INIS)

    Nuclear fusion is a long-term, safe and environmentally benign energy source suitable for the large-scale, base-load electricity production necessary for the sustainable development of our society. The EURATOM Fusion Programme has the world-wide leadership of the magnetic confinement fusion research and development (R and D) activities. This paper presents a review of the strategy, programmatic content and organization of this fully integrated and co-ordinated programme. Special attention is given to the fusion R and D activities in the 7th Framework Programme as well as to the ITER Project

  7. Economic potential of inertial fusion

    International Nuclear Information System (INIS)

    Beyond the achievement of scientific feasibility, the key question for fusion energy is: does it have the economic potential to be significantly cheaper than fission and coal energy. If fusion has this high economic potential then there are compelling commercial and geopolitical incentives to accelerate the pace of the fusion program in the near term, and to install a global fusion energy system in the long term. Without this high economic potential, fusion's success depends on the failure of all alternatives, and there is no real incentive to accelerate the program. If my conjectures on the economic potential of inertial fusion are approximately correct, then inertial fusion energy's ultimate costs may be only half to two-thirds those of advanced fission and coal energy systems. Relative cost escalation is not assumed and could increase this advantage. Both magnetic and inertial approaches to fusion potentially have a two-fold economic advantage which derives from two fundamental properties: negligible fuel costs and high quality energy which makes possible more efficient generation of electricity. The wining approach to fusion may excel in three areas: electrical generating efficiency, minimum material costs, and adaptability to manufacture in automated factories. The winning approach must also rate highly in environmental potential, safety, availability factor, lifetime, small 0 and M costs, and no possibility of utility-disabling accidents

  8. Sonluminescence and cold fusion

    Institute of Scientific and Technical Information of China (English)

    TVPrevenslik

    1996-01-01

    A theory of sonoluminescence(SL) proposed asserts bubbles collapse in a pancake shape almost isothermally at constant volume.SL induced hot fusion at -107℃is most likely impossible.By the proposed theory,the bubbles are treated as miniature IRasers with the dimension between pancake faces equal to the half wavelength of the standing wave in resonance with the IRaser cavity dimensions.Before collapse,the IRasers are filled with 5-10eV of IR radiation from the Plank energy in the ambient surroundings.During collapse,the IUR radiation is trapped within the IRaser by the high IR reflectivity of the bubble wall water molecules.As the IRaser cavity dimension dercreases,the cavity resonant frequency increases.The bubble wall molecules undergo a continuous population inversion by always being pumped to higher energy states that favor stimulated emission instead of absorption.IRaser resonant intensification produces 5-10MeV,i.e.,-106UV photons with 5-10eV.On average,SL induced cold fuison does not occur although a few X-ray photons are produced.If the IR thermal energy before collapse is enhanced to a total energy of 10keV.say by exciting the vibration modes of the water molecules at 2.73um with a HF laser,collapse produces an average X-ray energy of about 10keV.unlike hot fusion ,Sl induced cold fusion is not impossible.

  9. Cold nuclear fusion

    Science.gov (United States)

    Tsyganov, E. N.; Bavizhev, M. D.; Buryakov, M. G.; Dabagov, S. B.; Golovatyuk, V. M.; Lobastov, S. P.

    2015-07-01

    If target deuterium atoms were implanted in a metal crystal in accelerator experiments, a sharp increase in the probability of DD-fusion reaction was clearly observed when compared with the reaction's theoretical value. The electronic screening potential, which for a collision of free deuterium atoms is about 27 eV, reached 300-700 eV in the case of the DD-fusion in metallic crystals. These data leads to the conclusion that a ban must exist for deuterium atoms to be in the ground state 1s in a niche filled with free conduction electrons. At the same time, the state 2p whose energy level is only 10 eV above that of state 1s is allowed in these conditions. With anisotropy of 2p, 3p or above orbitals, their spatial positions are strictly determined in the lattice coordinate system. When filling out the same potential niches with two deuterium atoms in the states 2p, 3p or higher, the nuclei of these atoms can be permanently positioned without creating much Coulomb repulsion at a very short distance from each other. In this case, the transparency of the potential barrier increases dramatically compared to the ground state 1s for these atoms. The probability of the deuterium nuclei penetrating the Coulomb barrier by zero quantum vibration of the DD-system also increases dramatically. The so-called cold nuclear DD-fusion for a number of years was registered in many experiments, however, was still rejected by mainstream science for allegedly having no consistent scientific explanation. Finally, it received the validation. Below, we outline the concept of this explanation and give the necessary calculations. This paper also considers the further destiny of the formed intermediate state of 4He∗.

  10. Cold nuclear fusion

    Energy Technology Data Exchange (ETDEWEB)

    Tsyganov, E.N., E-mail: edward.tsyganov@coldfusion-power.com [Cold Fusion Power, International (United States); Bavizhev, M.D. [LLC “Radium”, Moscow (Russian Federation); Buryakov, M.G. [Joint Institute for Nuclear Research (JINR), Dubna (Russian Federation); Dabagov, S.B. [RAS P.N. Lebedev Physical Institute, Leninsky pr. 53, 119991 Moscow (Russian Federation); National Research Nuclear University MEPhI, Kashirskoe shosse 31, 115409 Moscow (Russian Federation); Golovatyuk, V.M.; Lobastov, S.P. [Joint Institute for Nuclear Research (JINR), Dubna (Russian Federation)

    2015-07-15

    If target deuterium atoms were implanted in a metal crystal in accelerator experiments, a sharp increase in the probability of DD-fusion reaction was clearly observed when compared with the reaction’s theoretical value. The electronic screening potential, which for a collision of free deuterium atoms is about 27 eV, reached 300–700 eV in the case of the DD-fusion in metallic crystals. These data leads to the conclusion that a ban must exist for deuterium atoms to be in the ground state 1s in a niche filled with free conduction electrons. At the same time, the state 2p whose energy level is only 10 eV above that of state 1s is allowed in these conditions. With anisotropy of 2p, 3p or above orbitals, their spatial positions are strictly determined in the lattice coordinate system. When filling out the same potential niches with two deuterium atoms in the states 2p, 3p or higher, the nuclei of these atoms can be permanently positioned without creating much Coulomb repulsion at a very short distance from each other. In this case, the transparency of the potential barrier increases dramatically compared to the ground state 1s for these atoms. The probability of the deuterium nuclei penetrating the Coulomb barrier by zero quantum vibration of the DD-system also increases dramatically. The so-called cold nuclear DD-fusion for a number of years was registered in many experiments, however, was still rejected by mainstream science for allegedly having no consistent scientific explanation. Finally, it received the validation. Below, we outline the concept of this explanation and give the necessary calculations. This paper also considers the further destiny of the formed intermediate state of {sup 4}He{sup ∗}.

  11. Multi-block and path modelling procedures

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    2008-01-01

    The author has developed a unified theory of path and multi-block modelling of data. The data blocks are arranged in a directional path. Each data block can lead to one or more data blocks. It is assumed that there is given a collection of input data blocks. Each of them is supposed to describe one...... or more intermediate data blocks. The output data blocks are those that are at the ends of the paths and have no succeeding data blocks. The optimisation procedure finds weights for the input data blocks so that the size of the total loadings for the output data blocks are maximised. When the optimal...... weight vectors have been determined, the score and loading vectors for the data blocks in the path are determined. Appropriate adjustment of the data blocks is carried out at each step. Regression coefficients are computed for each data block that show how the data block is estimated by data blocks...

  12. Transforaminal lumbar interbody fusion vs. posterolateral instrumented fusion

    DEFF Research Database (Denmark)

    Christensen, A; Høy, K; Bünger, C;

    2014-01-01

    -utility of transforaminal lumbar interbody fusion (TLIF) compared to posterolateral instrumented fusion (PLF) from the societal perspective. 100 Patients were randomized to TLIF or PLF (51/49) and followed for 2 years. Cost data were acquired from national registers, and outcomes were measured using the Oswestry Disability...

  13. Fusion energy 2000. Fusion energy 1998 (2001 Edition). Proceedings

    International Nuclear Information System (INIS)

    This CD-ROM contains the Proceedings of 18th International Conference on Fusion Energy. It also contains an updated version of the Fusion Energy Conference 1998 Proceedings (38 additional papers included) as well as information on how to use this CD-ROM. The 18th International Atomic Energy Agency Fusion Energy Conference (FEC-2000) was held in Sorrento, Italy, 4-10 October 2000. 573 participants from over thirty countries and three international organizations took part in this Conference. The Conference was organized by the IAEA in co-operation with the Italian National Agency for New Technology, Energy and Environment (ENEA). Around 400 papers were presented in 22 oral and 8 poster sessions on magnetic confinement experiments, inertial fusion energy, plasma heating and current drive, ITER engineering design activities, magnetic confinement theory, innovative concepts, fusion technology, and safety and environment aspects. The 17th International Atomic Energy Agency (IAEA) Fusion Energy Conference was held in Yokohama, Japan, 19-24 October 1999. This 6-day conference, which was attended by 835 participants from over 30 countries and two international organizations, was organized by the IAEA in co-operation with the Japan Atomic Energy Research Institute (JAERI). More than 360 papers plus 5 summary talks were presented in 23 oral and 8 poster sessions on magnetic confinement and experiments, inertial fusion energy, plasma heating and current drive, ITER engineering design activities, magnetic confinement theory, innovative concepts and fusion technology

  14. OPAL Various Lead Glass Blocks

    CERN Multimedia

    These lead glass blocks were part of a CERN detector called OPAL (one of the four experiments at the LEP particle detector). OPAL uses some 12 000 blocks of glass like this to measure particle energies in the electromagnetic calorimeter. This detector measured the energy deposited when electrons and photons were slowed down and stopped.

  15. Block storage subsystem performance analysis

    CERN Document Server

    CERN. Geneva

    2016-01-01

    You feel that your service is slow because of the storage subsystem? But there are too many abstraction layers between your software and the raw block device for you to debug all this pile... Let's dive on the platters and check out how the block storage sees your I/Os! We can even figure out what those patterns are meaning.

  16. Classical Virasoro irregular conformal block

    CERN Document Server

    Rim, Chaiho

    2015-01-01

    Virasoro irregular conformal block with arbitrary rank is obtained for the classical limit or equivalently Nekrasov-Shatashvili limit using the beta-deformed irregular matrix model (Penner-type matrix model for the irregular conformal block). The same result is derived using the generalized Mathieu equation which is equivalent to the loop equation of the irregular matrix model.

  17. Osteoclast Fusion is Based on Heterogeneity Between Fusion Partners

    DEFF Research Database (Denmark)

    Hobolt-Pedersen, Anne-Sofie; Delaissé, Jean-Marie; Søe, Kent

    2014-01-01

    Bone-resorbing osteoclasts are formed through fusion of mononucleated precursors. Their choice of partners during the fusion process remains unclear. We hypothesized that osteoclasts are selective in their choice of fusion partner and that this selectivity is based on heterogeneity among the cells...... with respect to their maturation stage and their expression and cellular organization of fusion factors. Support for this hypothesis was found from immunofluorescence staining of the osteoclast fusion factors CD47, dendritic cell-specific transmembrane protein (DC-STAMP), and syncytin-1. These stainings...... revealed heterogeneous localization patterns of all three factors within a given culture of osteoclasts. CD47 was found to be localized primarily in small osteoclasts and preosteoclasts, which were also positive for DC-STAMP but negative for cathepsin K expression. A role of CD47 in the early osteoclast...

  18. Wavelet Transform based Medical Image Fusion With different fusion methods

    Directory of Open Access Journals (Sweden)

    Anjali Patil

    2015-03-01

    Full Text Available This paper proposes wavelet transform based image fusion algorithm, after studying the principles and characteristics of the discrete wavelet transform. Medical image fusion used to derive useful information from multimodality medical images. The idea is to improve the image content by fusing images like computer tomography (CT and magnetic resonance imaging (MRI images, so as to provide more information to the doctor and clinical treatment planning system. This paper based on the wavelet transformation to fused the medical images. The wavelet based fusion algorithms used on medical images CT and MRI, This involve the fusion with MIN , MAX, MEAN method. Also the result is obtained. With more available multimodality medical images in clinical applications, the idea of combining images from different modalities become very important and medical image fusion has emerged as a new promising research field

  19. The Shamrock lumbar plexus block

    DEFF Research Database (Denmark)

    Sauter, Axel R; Ullensvang, Kyrre; Niemi, Geir;

    2015-01-01

    BACKGROUND: The Shamrock technique is a new method for ultrasound-guided lumbar plexus blockade. Data on the optimal local anaesthetic dose are not available. OBJECTIVE: The objective of this study is to estimate the effective dose of ropivacaine 0.5% for a Shamrock lumbar plexus block. DESIGN: A...... prospective dose-finding study using Dixon's up-and-down sequential method. SETTING: University Hospital Orthopaedic Anaesthesia Unit. INTERVENTION: Shamrock lumbar plexus block performance and block assessment were scheduled preoperatively. Ropivacaine 0.5% was titrated with the Dixon and Massey up......-and-down method using a stepwise change of 5 ml in each consecutive patient. Combined blocks of the femoral, the lateral femoral cutaneous and the obturator nerve were prerequisite for a successful lumbar plexus block. PATIENTS: Thirty patients scheduled for lower limb orthopaedic surgery completed the study...

  20. Clean steels for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Gelles, D.S.

    1995-03-01

    Fusion energy production has an inherent advantage over fission: a fuel supply with reduced long term radioactivity. One of the leading candidate materials for structural applications in a fusion reactor is a tungsten stabilized 9% chromium Martensitic steel. This alloy class is being considered because it offers the opportunity to maintain that advantage in the reactor structure as well as provide good high temperature strength and radiation induced swelling and embrittlement resistance. However, calculations indicate that to obtain acceptable radioactivity levels within 500 years after service, clean steel will be required because the niobium impurity levels must be kept below about 2 appm and nickel, molybdenum, nitrogen, copper, and aluminum must be intentionally restricted. International efforts are addressing the problems of clean steel production. Recently, a 5,000 kg heat was vacuum induction melted in Japan using high purity commercial raw materials giving niobium levels less than 0.7 appm. This paper reviews the need for reduced long term radioactivity, defines the advantageous properties of the tungsten stabilized Martensitic steel class, and describes the international efforts to produce acceptable clean steels.

  1. Utility requirements for fusion

    International Nuclear Information System (INIS)

    This report describes work done and results obtained during performance of Task 1 of a study of Utility Requirements and Criteria for Fusion Options. The work consisted of developing a list of utility requirements for fusion optics containing definition of the requirements and showing their relative importance to the utility industry. The project team members developed a preliminary list which was refined by discussions and literature searches. The refined list was recast as a questionnaire which was sent to a substantial portion of the utility industry in this country. Forty-three questionnaire recipients responded including thirty-two utilities. A workshop was held to develop a revised requirements list using the survey responses as a major input. The list prepared by the workshop was further refined by a panel consisting of vice presidents of the three project team firms. The results of the study indicate that in addition to considering the cost of energy for a power plant, utilities consider twenty-three other requirements. Four of the requirements were judged to be vital to plant acceptability: Plant Capital Cost, Financial Liability, Plant Safety and Licensability

  2. Utility requirements for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Vondrasek, R.J.

    1982-02-01

    This report describes work done and results obtained during performance of Task 1 of a study of Utility Requirements and Criteria for Fusion Options. The work consisted of developing a list of utility requirements for fusion optics containing definition of the requirements and showing their relative importance to the utility industry. The project team members developed a preliminary list which was refined by discussions and literature searches. The refined list was recast as a questionnaire which was sent to a substantial portion of the utility industry in this country. Forty-three questionnaire recipients responded including thirty-two utilities. A workshop was held to develop a revised requirements list using the survey responses as a major input. The list prepared by the workshop was further refined by a panel consisting of vice presidents of the three project team firms. The results of the study indicate that in addition to considering the cost of energy for a power plant, utilities consider twenty-three other requirements. Four of the requirements were judged to be vital to plant acceptability: Plant Capital Cost, Financial Liability, Plant Safety and Licensability.

  3. Helium Find Thaws the Cold Fusion Trail.

    Science.gov (United States)

    Pennisi, E.

    1991-01-01

    Reported is a study of cold fusion in which trace amounts of helium, possible evidence of an actual fusion reaction, were found. Research methodology is detailed. The controversy over the validity of experimental results with cold fusion are reviewed. (CW)

  4. Sensor fusion for social robotics

    OpenAIRE

    Duffy, Brian R.; Garcia, C; Rooney, Colm, (Thesis); O'Hare, G.M.P.

    2000-01-01

    This paper advocates the application of sensor fusion for the visualisation of social robotic behaviour. Experiments with the Virtual Reality Workbench integrate the key elements of Virtual Reality and robotics in a coherent and systematic manner. The deliberative focusing of attention and sensor fusion between vision systems and sonar sensors is implemented on autonomous mobile robots functioning in standard office environments

  5. Civilian applications of laser fusion

    International Nuclear Information System (INIS)

    The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. We have found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser fusion studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented

  6. Advanced fusion concepts project summaries

    International Nuclear Information System (INIS)

    The activities of all the projects supported by the Advanced Fusion Concepts Branch of the Office of Fusion Energy, DOE, are described. These descriptions are project summaries of each of the individual projects, and contain title, persons responsible, funding, purpose, approach, recent progress, future plans, planned milestones, graduate students and other staff, and recent publications

  7. Tritium-assisted fusion breeders

    International Nuclear Information System (INIS)

    This report undertakes a preliminary assessment of the prospects of tritium-assisted D-D fuel cycle fusion breeders. Two well documented fusion power reactor designs - the STARFIRE (D-T fuel cycle) and the WILDCAT (Cat-D fuel cycle) tokamaks - are converted into fusion breeders by replacing the fusion electric blankets with 233U producing fission suppressed blankets; changing the Cat-D fuel cycle mode of operation by one of the several tritium-assisted D-D-based modes of operation considered; adjusting the reactor power level; and modifying the resulting plant cost to account for the design changes. Three sources of tritium are considered for assisting the D-D fuel cycle: tritium produced in the blankets from lithium or from 3He and tritium produced in the client fission reactors. The D-D-based fusion breeders using tritium assistance are found to be the most promising economically, especially the Tritium Catalyzed Deuterium mode of operation in which the 3He exhausted from the plasma is converted, by neutron capture in the blanket, into tritium which is in turn fed back to the plasma. The number of fission reactors of equal thermal power supported by Tritium Catalyzed Deuterium fusion breeders is about 50% higher than that of D-T fusion breeders, and the profitability is found to be slightly lower than that of the D-T fusion breeders

  8. Kaliski's explosive driven fusion experiments

    International Nuclear Information System (INIS)

    An experiment performed by a group in Poland on the production of DD fusion neutrons by purely explosive means is discussed. A method for multiplying shock velocities ordinarily available from high explosives by a factor of ten is described, and its application to DD fusion experiments is discussed

  9. Magnetic fusion program summary document

    International Nuclear Information System (INIS)

    This document outlines the current and planned research, development, and commercialization (RD and C) activities of the Offic of Fusion Energy under the Assistant Secretary for Energy Technology, US Department of Energy (DOE). The purpose of this document is to explain the Office of Fusion Energy's activities to Congress and its committees and to interested members of the public

  10. Potential economics of magnetic fusion

    International Nuclear Information System (INIS)

    The economics of superconducting-coil ''generic'' magnetic fusion reactors is considered. The conclusion of this study is that DT burning magnetic fusion reactors can be a competitive source of electricity in the 21st century, ie., ''you cannot prove from fundamental first principles that it won't work''

  11. Fusion Policy Advisory Committee (FPAC)

    International Nuclear Information System (INIS)

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan

  12. Fusion Policy Advisory Committee (FPAC)

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan.

  13. Cellulose binding domain fusion proteins

    Energy Technology Data Exchange (ETDEWEB)

    Shoseyov, Oded (Karmey Yosef, IL); Shpiegl, Itai (Rehovot, IL); Goldstein, Marc A. (Davis, CA); Doi, Roy H. (Davis, CA)

    1998-01-01

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production thereof. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques.

  14. Cyclic Processing for Context Fusion

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun

    2007-01-01

    Many machine-learning techniques use feedback information. However, current context fusion systems do not support this because they constrain processing to be structured as acyclic processing. This paper proposes a generalization which enables the use of cyclic processing in context fusion systems...

  15. Alpha particles in fusion research

    International Nuclear Information System (INIS)

    This collection of 39 (mostly view graph) presentations addresses various aspects of alpha particle physics in thermonuclear fusion research, including energy balance and alpha particle losses, transport, the influence of alpha particles on plasma stability, helium ash, the transition to and sustainment of a burning fusion plasma, as well as alpha particle diagnostics. Refs, figs and tabs

  16. The status of cold fusion

    Science.gov (United States)

    Storms, E.

    This report attempts to update the status of the phenomenon of cold fusion. The new field is continuing to grow as a variety of nuclear reactions are discovered to occur in a variety of chemical environments at modest temperatures. However, it must be cautioned that most scientists consider cold fusion as something akin to UFO's, ESP, and numerology.

  17. Multi-sensor fusion development

    Science.gov (United States)

    Bish, Sheldon; Rohrer, Matthew; Scheffel, Peter; Bennett, Kelly

    2016-05-01

    The U.S. Army Research Laboratory (ARL) and McQ Inc. are developing a generic sensor fusion architecture that involves several diverse processes working in combination to create a dynamic task-oriented, real-time informational capability. Processes include sensor data collection, persistent and observational data storage, and multimodal and multisensor fusion that includes the flexibility to modify the fusion program rules for each mission. Such a fusion engine lends itself to a diverse set of sensing applications and architectures while using open-source software technologies. In this paper, we describe a fusion engine architecture that combines multimodal and multi-sensor fusion within an Open Standard for Unattended Sensors (OSUS) framework. The modular, plug-and-play architecture of OSUS allows future fusion plugin methodologies to have seamless integration into the fusion architecture at the conceptual and implementation level. Although beyond the scope of this paper, this architecture allows for data and information manipulation and filtering for an array of applications.

  18. Civilian applications of laser fusion

    Energy Technology Data Exchange (ETDEWEB)

    Maniscalco, J.; Blink, J.; Buntzen, R.; Hovingh, J.; Meier, W.; Monsler, M.; Walker, P.

    1978-08-14

    The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. We have found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser fusion studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented.

  19. Fusion Rings for Quantum Groups

    DEFF Research Database (Denmark)

    Andersen, Henning Haahr; Stroppel, Catharina

    2014-01-01

    We study the fusion rings of tilting modules for a quantum group at a root of unity modulo the tensor ideal of negligible tilting modules. We identify them in type A with the combinatorial rings from Korff, C., Stroppel, C.: The sl(ˆn)k-WZNW fusion ring: a combinato-rial construction and a realis...

  20. The quest for fusion power

    Science.gov (United States)

    Cowley, Steven C.

    2016-05-01

    Fusion power is one of a very few sustainable options to replace fossil fuels as the world's primary energy source. Although the conditions for fusion have been reached, much remains to be done to turn scientific success into commercial electrical power.

  1. Fusion research programme in India

    Indian Academy of Sciences (India)

    Shishir Deshpande; Predhiman Kaw

    2013-10-01

    The fusion energy research program of India is summarized in the context of energy needs and scenario of tokamak advancements on domestic and international fronts. In particular, the various technologies that will lead us to ultimately build a fusion power reactor are identified along with the steps being taken for their indigenous development.

  2. Fusion energy. What Canada can do

    International Nuclear Information System (INIS)

    As Canada's fusion programs have grown, Canadian capabilities in fusion science and technology have grown and matured with them. The fusion capabilities described in this booklet have come from a coordinated national effort. The Government of Canada is committed to continuing its fusion energy program, and to supporting global fusion efforts. These first pages provide an overview of Canada's fusion work and its underlying basis of science and technology

  3. Some properties of C-fusion frames

    OpenAIRE

    Faroughi , Mohammad Hasan

    2010-01-01

    In [10], we generalized the concept of fusion frames, namely, c-fusion frames, which is a continuous version of the fusion frames. In this article we give some important properties about the generalization, namely erasures of subspaces, the bound of c-erasure reconstruction error for Parseval c-fusion frames, perturbation of c-fusion frames and the frame operator for fusion pair.

  4. The intracellular domain of Dumbfounded affects myoblast fusion efficiency and interacts with Rolling pebbles and Loner.

    Directory of Open Access Journals (Sweden)

    Sarada Bulchand

    Full Text Available Drosophila body wall muscles are multinucleated syncytia formed by successive fusions between a founder myoblast and several fusion competent myoblasts. Initial fusion gives rise to a bi/trinucleate precursor followed by more fusion cycles forming a mature muscle. This process requires the functions of various molecules including the transmembrane myoblast attractants Dumbfounded (Duf and its paralogue Roughest (Rst, a scaffold protein Rolling pebbles (Rols and a guanine nucleotide exchange factor Loner. Fusion completely fails in a duf, rst mutant, and is blocked at the bi/trinucleate stage in rols and loner single mutants. We analysed the transmembrane and intracellular domains of Duf, by mutating conserved putative signaling sites and serially deleting the intracellular domain. These were tested for their ability to translocate and interact with Rols and Loner and to rescue the fusion defect in duf, rst mutant embryos. Studying combinations of double mutants, further tested the function of Rols, Loner and other fusion molecules. Here we show that serial truncations of the Duf intracellular domain successively compromise its function to translocate and interact with Rols and Loner in addition to affecting myoblast fusion efficiency in embryos. Putative phosphorylation sites function additively while the extreme C terminus including a PDZ binding domain is dispensable for its function. We also show that fusion is completely blocked in a rols, loner double mutant and is compromised in other double mutants. These results suggest an additive function of the intracellular domain of Duf and an early function of Rols and Loner which is independent of Duf.

  5. Deployment of membrane fusion protein domains during fusion.

    Science.gov (United States)

    Bentz, J; Mittal, A

    2000-01-01

    It is clear that both viral and intracellular membrane fusion proteins contain a minimal set of domains which must be deployed at the appropriate time during the fusion process. An account of these domains and their functions is given here for the four best-described fusion systems: influenza HA, sendai virus F1, HIV gp120/41 and the neuronal SNARE core composed of synaptobrevin (syn), syntaxin (stx) and the N- and C-termini of SNAP25 (sn25), together with the Ca(2+)binding protein synaptotagmin (syt). Membrane fusion begins with the binding of the virion or vesicle to the target membrane via receptors. The committed step in influenza HA- mediated fusion begins with an aggregate of HAs (at least eight) with some of their HA2 N-termini, a.k.a. fusion peptides, embedded into the viral bilayer (Bentz, 2000 a). The hypothesis presented in Bentz (2000 b) is that the conformational change of HA to the extended coiled coil extracts the fusion peptides from the viral bilayer. When this extraction occurs from the center of the site of restricted lipid flow, it exposes acyl chains and parts of the HA transmembrane domains to the aqueous media, i.e. a hydrophobic defect is formed. This is the 'transition state' of the committed step of fusion. It is stabilized by a 'dam' of HAs, which are inhibited from diffusing away by the rest of the HAs in the aggregate and because that would initially expose more acyl chains to water. Recruitment of lipids from the apposed target membrane can heal this hydrophobic defect, initiating lipid mixing and fusion. The HA transmembrane domains are required to be part of the hydrophobic defect, because the HA aggregate must be closely packed enough to restrict lipid flow. This hypothesis provides a simple and direct coupling between the energy released by the formation of the coiled coil to the energy needed to create and stabilize the high energy intermediates of fusion. Several of these essential domains have been described for the viral fusion

  6. Block Curricula: A Guide to Teaching with Unit Blocks and Hollow Blocks in the Classroom.

    Science.gov (United States)

    Clark, Phyllis; Tiedemann, Nancy

    This curriculum guide for preschool teachers was designed for use with wooden unit and hollow blocks to foster a variety of math, science, language, and social skills. Following an introduction to the curriculum and a discussion of cooperative learning and stages of block building, the guide is divided into three parts. Part 1 of the guide, "Unit…

  7. Criminal Justice Systems. Block I: Law Enforcement. Block II: The Courts. Block III: Corrections. Block IV: Community Relations. Block V: Proficiency Skills. Block VI: Criminalistics. Student Guide.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

    This student guide together with an instructor guide comprise a set of curriculum materials on the criminal justice system. The student guide contains self-contained instructional material that students can study at their own pace most of the time. Six major subject areas or blocks, which are further broken down into several units, with some units…

  8. Criminal Justice Systems. Block I: Law Enforcement. Block II: The Courts. Block III: Corrections. Block IV: Community Relations. Block V: Proficiency Skills. Block VI: Criminalistics. Instructor Guide.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

    This instructor guide together with a student guide comprise a set of curriculum materials on the criminal justice system. The instructor guide is a resource for planning and managing individualized, competency-based instruction in six major subject areas or blocks, which are further broken down into several units with some units having several…

  9. Fusion characterization of biomass ash

    DEFF Research Database (Denmark)

    Ma, Teng; Fan, Chuigang; Hao, Lifang;

    2016-01-01

    The ash fusion characteristics are important parameters for thermochemical utilization of biomass. In this research, a method for measuring the fusion characteristics of biomass ash by Thermo-mechanical Analyzer, TMA, is described. The typical TMA shrinking ratio curve can be divided into two...... stages, which are closely related to ash melting behaviors. Several characteristics temperatures based on the TMA curves are used to assess the ash fusion characteristics. A new characteristics temperature, Tm, is proposed to represent the severe melting temperature of biomass ash. The fusion...... characteristics of six types of biomass ash have been measured by TMA. Compared with standard ash fusibility temperatures (AFT) test, TMA is more suitable for measuring the fusion characteristics of biomass ash. The glassy molten areas of the ash samples are sticky and mainly consist of K-Ca-silicates....

  10. Structure information from fusion barriers

    Indian Academy of Sciences (India)

    S V S Sastry; S Santra

    2000-06-01

    It is shown that the analysis of fusion barrier distributions is not always an unambiguous test or a ‘fingerprint’ of the structure information of the colliding nuclei. Examples are presented with same fusion barrier distributions for nuclei having different structures. The fusion excitation functions for 16O+208Pb, using the coupled reaction channel (CRC) method and correct structure information, have been analysed. The barrier distributions derived from these excitation functions including many of the significant channels are featureless, although these channels have considerable effects on the fusion excitation function. However, a simultaneous analysis of the fusion, elastic and quasi-elastic channels would fix the structure and the reaction unambiguously

  11. Fusion - 2050 perspective (in Polish)

    CERN Document Server

    Romaniuk, R S

    2013-01-01

    The results of strongly exothermic reaction of thermonuclear fusion between nuclei of deuterium and tritium are: helium nuclei and neutrons, plus considerable kinetic energy of neutrons of over 14 MeV. DT nuclides synthesis reaction is probably not the most favorable one for energy production, but is the most advanced technologically. More efficient would be possibly aneutronic fusion. The EU by its EURATOM agenda prepared a Road Map for research and implementation of Fusion as a commercial method of thermonuclear energy generation in the time horizon of 2050.The milestones on this road are tokomak experiments JET, ITER and DEMO, and neutron experiment IFMIF. There is a hope, that by engagement of the national government, and all research and technical fusion communities, part of this Road Map may be realized in Poland. The infrastructure build for fusion experiments may be also used for material engineering research, chemistry, biomedical, associated with environment protection, power engineering, security, ...

  12. Adjoint affine fusion and tadpoles

    Science.gov (United States)

    Urichuk, Andrew; Walton, Mark A.

    2016-06-01

    We study affine fusion with the adjoint representation. For simple Lie algebras, elementary and universal formulas determine the decomposition of a tensor product of an integrable highest-weight representation with the adjoint representation. Using the (refined) affine depth rule, we prove that equally striking results apply to adjoint affine fusion. For diagonal fusion, a coefficient equals the number of nonzero Dynkin labels of the relevant affine highest weight, minus 1. A nice lattice-polytope interpretation follows and allows the straightforward calculation of the genus-1 1-point adjoint Verlinde dimension, the adjoint affine fusion tadpole. Explicit formulas, (piecewise) polynomial in the level, are written for the adjoint tadpoles of all classical Lie algebras. We show that off-diagonal adjoint affine fusion is obtained from the corresponding tensor product by simply dropping non-dominant representations.

  13. Structural materials for fusion magnets

    International Nuclear Information System (INIS)

    Of major technical and cost impact to Magnetic Fusion Energy development are the materials for the magnet structure. Likened to gas pressure, the magnetic field lines try to expand the structure with equivalent pressures up to 1000 atm. Not only are large tensile forces produced, but significant bending forces may also be present. To withstand these forces in the restricted spaces available, materials of exceptional strength and toughness are required. In this regard, the low-temperature environment of superconducting magnets can be an advantage because many materials exhibit enhanced properties at reduced temperatures. Those materials and fabrication techniques that are attractive to fusion magnets are discussed and relative comparisons made. Considerations such as strength, toughness, and joining techniques are balanced agains recommended design criteria to reach an optimum design. Several examples of material selection are cited for large fusion magnets such as Baseball II, the Mirror Fusion Test Facility, the Toroidal Fusion Test Facility, and the Large Coil Project. (orig.)

  14. Is there hope for fusion?

    International Nuclear Information System (INIS)

    From the outset in the 1950's, fusion research has been motivated by environmental concerns as well as long-term fuel supply issues. Compared to fossil fuels both fusion and fission would produce essentially zero emissions to the atmosphere. Compared to fission, fusion reactors should offer high demonstrability of public protection from accidents and a substantial amelioration of the radioactive waste problem. Fusion still requires lengthy development, the earliest commercial deployment being likely to occur around 2025--2050. However, steady scientific progress is being made and there is a wide consensus that it is time to plan large-scale engineering development. A major international effort, called the International Thermonuclear Experimental Reactor (ITER), is being carried out under IAEA auspices to design the world's first fusion engineering test reactor, which could be constructed in the 1990's. 4 figs., 3 tabs

  15. Adjoint affine fusion and tadpoles

    CERN Document Server

    Urichuk, Andrew

    2016-01-01

    We study affine fusion with the adjoint representation. For simple Lie algebras, elementary and universal formulas determine the decomposition of a tensor product of an integrable highest-weight representation with the adjoint representation. Using the (refined) affine depth rule, we prove that equally striking results apply to adjoint affine fusion. For diagonal fusion, a coefficient equals the number of nonzero Dynkin labels of the relevant affine highest weight, minus 1. A nice lattice-polytope interpretation follows, and allows the straightforward calculation of the genus-1 1-point adjoint Verlinde dimension, the adjoint affine fusion tadpole. Explicit formulas, (piecewise) polynomial in the level, are written for the adjoint tadpoles of all classical Lie algebras. We show that off-diagonal adjoint affine fusion is obtained from the corresponding tensor product by simply dropping non-dominant representations.

  16. The elementary fusion modalities of osteoclasts

    DEFF Research Database (Denmark)

    Søe, Kent; Hobolt-Pedersen, Anne-Sofie; Delaisse, Jean-Marie

    2015-01-01

    The last step of the osteoclast differentiation process is cell fusion. Most efforts to understand the fusion mechanism have focused on the identification of molecules involved in the fusion process. Surprisingly, the basic fusion modalities, which are well known for fusion of other cell types......, are not known for the osteoclast. Here we show that osteoclast fusion partners are characterized by differences in mobility, nuclearity, and differentiation level. Our demonstration was based on time-laps videos of human osteoclast preparations from three donors where 656 fusion events were analyzed. Fusions...

  17. Information integration for data fusion

    Energy Technology Data Exchange (ETDEWEB)

    Bray, O.H.

    1997-01-01

    Data fusion has been identified by the Department of Defense as a critical technology for the U.S. defense industry. Data fusion requires combining expertise in two areas - sensors and information integration. Although data fusion is a rapidly growing area, there is little synergy and use of common, reusable, and/or tailorable objects and models, especially across different disciplines. The Laboratory-Directed Research and Development project had two purposes: to see if a natural language-based information modeling methodology could be used for data fusion problems, and if so, to determine whether this methodology would help identify commonalities across areas and achieve greater synergy. The project confirmed both of the initial hypotheses: that the natural language-based information modeling methodology could be used effectively in data fusion areas and that commonalities could be found that would allow synergy across various data fusion areas. The project found five common objects that are the basis for all of the data fusion areas examined: targets, behaviors, environments, signatures, and sensors. Many of the objects and the specific facts related to these objects were common across several areas and could easily be reused. In some cases, even the terminology remained the same. In other cases, different areas had their own terminology, but the concepts were the same. This commonality is important with the growing use of multisensor data fusion. Data fusion is much more difficult if each type of sensor uses its own objects and models rather than building on a common set. This report introduces data fusion, discusses how the synergy generated by this LDRD would have benefited an earlier successful project and contains a summary information model from that project, describes a preliminary management information model, and explains how information integration can facilitate cross-treaty synergy for various arms control treaties.

  18. World progress toward fusion energy

    International Nuclear Information System (INIS)

    This paper will describe the progress in fusion science and technology from a world perspective. The paper will cover the current technical status, including the understanding of fusion's economic, environmental, and safety characteristics. Fusion experiments are approaching the energy breakeven condition. An energy gain (Q) of 30 percent has been achieved in magnetic confinement experiments. In addition, temperatures required for an ignited plasma (Ti = 32 KeV) and energy confinements about 75 percent of that required for ignition have been achieved in separate experiments. Two major facilities have started the experimental campaign to extend these results and achieve or exceed Q = 1 plasma conditions by 1990. Inertial confinement fusion experiments are also approaching thermonuclear conditions and have achieved a compression factor 100-200 times liquid D-T. Because of this progress, the emphasis in fusion research is turning toward questions of engineering feasibility. Leaders of the major fusion R and D programs in the European Community (EC), Japan, the United States, and the U.S.S.R. have agreed on the major steps that are needed to reach the point at which a practical fusion system can be designed. The United States is preparing for an experiment to address the last unexplored scientific issue, the physics of an ignited plasma, during the late 1990's. The EC, Japan, U.S.S.R., and the United States have joined together under the auspices of the International Atomic Energy Agency (IAEA) to jointly design and prepare the validating R and D for an international facility, the International Thermonuclear Experimental Reactor (ITER), to address all the remaining scientific issues and to explore the engineering technology of fusion around the turn of the century. In addition, a network of international agreements have been concluded between these major parties and a number of smaller fusion programs, to cooperate on resolving a complete spectrum of fusion science and

  19. Block copolymer patterns and templates

    Directory of Open Access Journals (Sweden)

    Mingqi Li

    2006-09-01

    Full Text Available This review describes the chemical and physical aspects of patternable block copolymers and their use for nanostructure fabrication. The patternability of block copolymers results from their ability to self-assemble into microdomains and the manipulation of these patterns by a variety of physical and chemical means. Procedures for achieving long-range lateral order, as well as orientation order of microdomain patterns, are discussed. The level of control that these strategies afford has enabled block copolymers to be used as templates for fabricating a variety of nanostructures.

  20. Fusion Power Demonstration III

    International Nuclear Information System (INIS)

    This is the third in the series of reports covering the Fusion Power Demonstration (FPD) design study. This volume considers the FPD-III configuration that incorporates an octopole end plug. As compared with the quadrupole end-plugged designs of FPD-I and FPD-II, this octopole configuration reduces the number of end cell magnets and shortens the minimum ignition length of the central cell. The end-cell plasma length is also reduced, which in turn reduces the size and cost of the end cell magnets and shielding. As a contiuation in the series of documents covering the FPD, this report does not stand alone as a design description of FPD-III. Design details of FPD-III subsystems that do not differ significantly from those of the FPD-II configuration are not duplicated in this report

  1. Microwave superheaters for fusion

    International Nuclear Information System (INIS)

    The microwave superheater uses the synchrotron radiation from a thermonuclear plasma to heat gas seeded with an alkali metal to temperatures far above the temperature of material walls. It can improve the efficiency of the Compact Fusion Advanced Rankine (CFAR) cycle described elsewhere in these proceedings. For a proof-of-principle experiment using helium, calculations show that a gas superheat ΔT of 20000K is possible when the wall temperature is maintained at 10000K. The concept can be scaled to reactor grade systems. Because of the need for synchrotron radiation, the microwave superheater is best suited for use with plasmas burning an advanced fuel such as D-3He. 5 refs

  2. AMD Fusion APU

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    在CES 2011消赞电子展会开幕之前,首款搭载AIVD Fusion APU的笔记本就已曝光,有关AMD Fusion平台发布的消息也是传闻已久。这款平台被命名为“Fusion”(即中文“融合”),其中APU是“Accelerated Processing Units”的简称,它将CPU与GPU整合在一起,让PC终端可以设计得更小、能耗更低、性能更强、续航更长、视觉体验更加优秀。

  3. DNA fusion gene vaccines

    DEFF Research Database (Denmark)

    Holst, Peter Johannes; Bassi, Maria Rosaria; Thomsen, Allan Randrup;

    2010-01-01

    DNA vaccines are versatile and safe, but limited immunogenicity has prevented their use in the clinical setting. Experimentally, immunogenicity may be enhanced by the use of new delivery technologies, by coadministration of cytokines and pathogen-associated molecular patterns, or by fusion...... of antigens into molecular domains that enhance antigen presentation. More specifically, the immunogenicity of DNA vaccines may benefit from increased protein synthesis, increased T-cell help and MHC class I presentation, and the addition of a range of specific cytokines and pathogen-associated molecular...... with viral-vectored vaccines, various synergistic components may need to be incorporated into DNA vaccines. From the perspective of the future clinical use of DNA vaccines, it has been suggested that antigen presentation should be improved and cytokine coadministration attempted. However, even...

  4. EURATOM strategy towards fusion energy

    International Nuclear Information System (INIS)

    Research and development (Research and Development) activities in controlled thermonuclear fusion have been carried out since the 60's of the last century aiming at providing a new clean, powerful, practically inexhaustive, safe, environmentally friend and economically attractive energy source for the sustainable development of our society.The EURATOM Fusion Programme (EFP) has the leadership of the magnetic confinement Research and Development activities due to the excellent results obtained on JET and other specialized devices, such as ASDEX-Upgrade, TORE SUPRA, FTU, TCV, TEXTOR, CASTOR, ISTTOK, MAST, TJ-II, W7-X, RFX and EXTRAP. JET is the largest tokamak in operation and the single device that can use deuterium and tritium mixes. It has produced 16 MW of fusion power, during 3 seconds, with an energy amplification of 0.6. The next steps of the EFP strategy towards fusion energy are ITER complemented by a vigorous Accompanying Programme, DEMO and a prototype of a fusion power plant. ITER, the first experimental fusion reactor, is a large-scale project (35-year duration, 10000 MEuros budget), developed in the frame of a very broad international collaboration, involving EURATOM, Japan, Russia Federation, United States of America, Korea, China and India. ITER has two main objectives: (i) to prove the scientific and technical viability of fusion energy by producing 500 MW, during 300 seconds and a energy amplification between 10 and 20; and (ii) to test the simultaneous and integrated operation of the technologies needed for a fusion reactor. The Accompanying Programme aims to prepare the ITER scientific exploitation and the DEMO design, including the development of the International Fusion Materials Irradiation Facility (IFMIF). A substantial part of this programme will be carried out in the frame of the Broader Approach, an agreement signed by EURATOM and Japan. The main goal of DEMO is to produce electricity, during a long time, from nuclear fusion reactions. The

  5. LiWall Fusion - The New Concept of Magnetic Fusion

    Energy Technology Data Exchange (ETDEWEB)

    L.E. Zakharov

    2011-01-12

    Utilization of the outstanding abilities of a liquid lithium layer in pumping hydrogen isotopes leads to a new approach to magnetic fusion, called the LiWall Fusion. It relies on innovative plasma regimes with low edge density and high temperature. The approach combines fueling the plasma by neutral injection beams with the best possible elimination of outside neutral gas sources, which cools down the plasma edge. Prevention of cooling the plasma edge suppresses the dominant, temperature gradient related turbulence in the core. Such an approach is much more suitable for controlled fusion than the present practice, relying on high heating power for compensating essentially unlimited turbulent energy losses.

  6. LiWall Fusion - The New Concept of Magnetic Fusion

    International Nuclear Information System (INIS)

    Utilization of the outstanding abilities of a liquid lithium layer in pumping hydrogen isotopes leads to a new approach to magnetic fusion, called the LiWall Fusion. It relies on innovative plasma regimes with low edge density and high temperature. The approach combines fueling the plasma by neutral injection beams with the best possible elimination of outside neutral gas sources, which cools down the plasma edge. Prevention of cooling the plasma edge suppresses the dominant, temperature gradient related turbulence in the core. Such an approach is much more suitable for controlled fusion than the present practice, relying on high heating power for compensating essentially unlimited turbulent energy losses.

  7. Multispectral analytical image fusion

    International Nuclear Information System (INIS)

    With new and advanced analytical imaging methods emerging, the limits of physical analysis capabilities and furthermore of data acquisition quantities are constantly pushed, claiming high demands to the field of scientific data processing and visualisation. Physical analysis methods like Secondary Ion Mass Spectrometry (SIMS) or Auger Electron Spectroscopy (AES) and others are capable of delivering high-resolution multispectral two-dimensional and three-dimensional image data; usually this multispectral data is available in form of n separate image files with each showing one element or other singular aspect of the sample. There is high need for digital image processing methods enabling the analytical scientist, confronted with such amounts of data routinely, to get rapid insight into the composition of the sample examined, to filter the relevant data and to integrate the information of numerous separate multispectral images to get the complete picture. Sophisticated image processing methods like classification and fusion provide possible solution approaches to this challenge. Classification is a treatment by multivariate statistical means in order to extract analytical information. Image fusion on the other hand denotes a process where images obtained from various sensors or at different moments of time are combined together to provide a more complete picture of a scene or object under investigation. Both techniques are important for the task of information extraction and integration and often one technique depends on the other. Therefore overall aim of this thesis is to evaluate the possibilities of both techniques regarding the task of analytical image processing and to find solutions for the integration and condensation of multispectral analytical image data in order to facilitate the interpretation of the enormous amounts of data routinely acquired by modern physical analysis instruments. (author)

  8. Prospects for bubble fusion

    Energy Technology Data Exchange (ETDEWEB)

    Nigmatulin, R.I. [Tyumen Institute of Mechanics of Multiphase Systems (TIMMS), Marx (Russian Federation); Lahey, R.T. Jr. [Rensselaer Polytechnic Institute, Troy, NY (United States)

    1995-09-01

    In this paper a new method for the realization of fusion energy is presented. This method is based on the superhigh compression of a gas bubble (deuterium or deuterium/thritium) in heavy water or another liquid. The superhigh compression of a gas bubble in a liquid is achieved through forced non-linear, non-periodic resonance oscillations using moderate amplitudes of forcing pressure. The key feature of this new method is a coordination of the forced liquid pressure change with the change of bubble volume. The corresponding regime of the bubble oscillation has been called {open_quotes}basketball dribbling (BD) regime{close_quotes}. The analytical solution describing this process for spherically symmetric bubble oscillations, neglecting dissipation and compressibility of the liquid, has been obtained. This solution shown no limitation on the supercompression of the bubble and the corresponding maximum temperature. The various dissipation mechanisms, including viscous, conductive and radiation heat losses have been considered. It is shown that in spite of these losses it is possible to achieve very high gas bubble temperatures. This because the time duration of the gas bubble supercompression becomes very short when increasing the intensity of compression, thus limiting the energy losses. Significantly, the calculated maximum gas temperatures have shown that nuclear fusion may be possible. First estimations of the affect of liquid compressibility have been made to determine possible limitations on gas bubble compression. The next step will be to investigate the role of interfacial instability and breaking down of the bubble, shock wave phenomena around and in the bubble and mutual diffusion of the gas and the liquid.

  9. Hybrid Fusion for Biometrics: Combining Score-level and Decision-level Fusion

    OpenAIRE

    Tao, Q; Veldhuis, R.N.J.

    2008-01-01

    A general framework of fusion at decision level, which works on ROCs instead of matching scores, is investigated. Under this framework, we further propose a hybrid fusion method, which combines the score-level and decision-level fusions, taking advantage of both fusion modes. The hybrid fusion adaptively tunes itself between the two levels of fusion, and improves the final performance over the original two levels. The proposed hybrid fusion is simple and effective for combining different biom...

  10. Image Enhancement by Image Fusion for Crime Investigation

    Directory of Open Access Journals (Sweden)

    S. Kanaga Suba Raja

    2016-06-01

    Full Text Available In the criminal investigation field, images are the principal forms for investigation and for probing crime detection. The imaging science applied in criminal investigation is face detection, surveillance camera imaging, and crime scene analysis. Digital imaging succors image manipulation, alteration and enhancement techniques. The traditional methodologies enhance the given image by improving the local or global components of the image. It proves a debacle since it engages noise amplification, block discontinuities, colour mismatch, edge distortion and checkerboard effects thereby limiting image processing tasks. To the same degree of enhancement, spurned artefacts are given rise. Thus to balance the global and local factors of the image and to weed out the tenebrous components; fusion of multiple alike images are performed to produce a meliorated image. The fusion is done by fusing a pyramid constructed image and a wavelet transformed image. The pyramid image and the wavelet transformed image are then fused through to afford a revealing image for better perception by the human visual system. The experimental results show that our proposed fusion scheme is effective and the fusion is applied over a surveillance camera image grab.

  11. Recursion Relations for Conformal Blocks

    CERN Document Server

    Penedones, João; Yamazaki, Masahito

    2015-01-01

    In the context of conformal field theories in general space-time dimension, we find all the possible singularities of the conformal blocks as functions of the scaling dimension $\\Delta$ of the exchanged operator. In particular, we argue, using representation theory of parabolic Verma modules, that in odd spacetime dimension the singularities are only simple poles. We discuss how to use this information to write recursion relations that determine the conformal blocks. We first recover the recursion relation introduced in 1307.6856 for conformal blocks of external scalar operators. We then generalize this recursion relation for the conformal blocks associated to the four point function of three scalar and one vector operator. Finally we specialize to the case in which the vector operator is a conserved current.

  12. MarineMineralsProgramBlocks

    Data.gov (United States)

    Bureau of Ocean Energy Management, Department of the Interior — This data set contains OCS block outlines and delineated polygons in ESRI ArcGIS shape file format for the BOEM Gulf of Mexico Region that contain sediment...

  13. Left bundle-branch block

    DEFF Research Database (Denmark)

    Risum, Niels; Strauss, David; Sogaard, Peter;

    2013-01-01

    The relationship between myocardial electrical activation by electrocardiogram (ECG) and mechanical contraction by echocardiography in left bundle-branch block (LBBB) has never been clearly demonstrated. New strict criteria for LBBB based on a fundamental understanding of physiology have recently...

  14. Is fusion research worth it?

    International Nuclear Information System (INIS)

    Long-term energy R and D such as fusion needs to be valued in the framework of options analysis. The R and D itself does not provide energy, but rather provides the option to construct and operate energy-producing systems. An initial analysis of this problem applied the Black-Scholes formula based on historical fluctuations in the cost of energy. That study concluded that for reasonable assumptions about the operating cost of fusion power plants, the fusion option was cost effective. Here we use a simpler and more transparent estimate of the future value of energy, but look more carefully at the question of the opportunity cost of engaging in fusion R and D, including the possibility of hedging financially against increased prices for acceptable energy through an 'energy insurance' fund, as compared with the fusion option. We find that the fusion option is very attractive if the probability is more than a few percent that fusion will cost less than the best environmentally acceptable alternative for its potential market share. (author)

  15. Civilian applications of laser fusion

    International Nuclear Information System (INIS)

    The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. It was found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented

  16. Canadian fusion fuels technology project

    International Nuclear Information System (INIS)

    The Canadian Fusion Fuels Technology Project was launched in 1982 to coordinate Canada's provision of fusion fuels technology to international fusion power development programs. The project has a mandate to extend and adapt existing Canadian tritium technologies for use in international fusion power development programs. 1985-86 represents the fourth year of the first five-year term of the Canadian Fusion Fuels Technology Project (CFFTP). This reporting period coincides with an increasing trend in global fusion R and D to direct more effort towards the management of tritium. This has resulted in an increased linking of CFFTP activities and objectives with those of facilities abroad. In this way there has been a continuing achievement resulting from CFFTP efforts to have cooperative R and D and service activities with organizations abroad. All of this is aided by the cooperative international atmosphere within the fusion community. This report summarizes our past year and provides some highlights of the upcoming year 1986/87, which is the final year of the first five-year phase of the program. AECL (representing the Federal Government), the Ministry of Energy (representing Ontario) and Ontario Hydro, have given formal indication of their intent to continue with a second five-year program. Plans for the second phase will continue to emphasize tritium technology and remote handling

  17. A Novel Tetrathiafulvalene Building Block

    DEFF Research Database (Denmark)

    Jeppesen, Jan Oskar; Takimiya, Kazuo; Thorup, Niels;

    1999-01-01

    Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported.......Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported....

  18. Statistical cryptanalysis of block ciphers

    OpenAIRE

    Junod, Pascal; Vaudenay, Serge

    2007-01-01

    Since the development of cryptology in the industrial and academic worlds in the seventies, public knowledge and expertise have grown in a tremendous way, notably because of the increasing, nowadays almost ubiquitous, presence of electronic communication means in our lives. Block ciphers are inevitable building blocks of the security of various electronic systems. Recently, many advances have been published in the field of public-key cryptography, being in the understanding of involved securi...

  19. NANOSTRUCTURES OF FUNCTIONAL BLOCK COPOLYMERS

    Institute of Scientific and Technical Information of China (English)

    Guojun Liu

    2000-01-01

    Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, selfassembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films with nanochannels was used to illustrate the strategy we took. In this particular case, a linear triblock copolymer polyisopreneblock-poly(2-cinnamoylethyl methacrylate)-block-poly(t-butyl acrylate), PI-b-PCEMA-b-PtBA, was used. Films, 25 to50μm thick, were prepared from casting on glass slides a toluene solution of PI-b-PCEMA-b-PtBA and PtBA homopolymer,hPtBA, where hPtBA is shorter than the PtBA block. At the hPtBA mass fraction of 20% relative to the triblock or the total PtBA (hPtBA and PtBA block) volume fraction of 0.44, hPtBA and PtBA formed a seemingly continuous phase in the matrix of PCEMA and PI. Such a block segregation pattern was locked in by photocrosslinking the PCEMA domain. Nanochannels were formed by extracting out hPtBA with solvent. Alternatively, larger channels were obtained from extracting out hPtBA and hydrolyzing the t-butyl groups of the PtBA block. Such membranes were not liquid permeable but had gas permeability constants ~6 orders of magnitude higher than that of low-density polyethylene films.

  20. Chimera: a Bioconductor package for secondary analysis of fusion products.

    OpenAIRE

    Beccuti, Marco; Carrara, Matteo; Cordero, Francesca; Lazzarato, Fulvio; Donatelli, Susanna; Nadalin, Francesca; Policriti, Alberto; Calogero, Raffaele A.

    2014-01-01

    Summary: Chimera is a Bioconductor package that organizes, annotates, analyses and validates fusions reported by different fusion detection tools; current implementation can deal with output from bellerophontes, chimeraScan, deFuse, fusionCatcher, FusionFinder, FusionHunter, FusionMap, mapSplice, Rsubread, tophat-fusion and STAR. The core of Chimera is a fusion data structure that can store fusion events detected with any of the aforementioned tools. Fusions are then easily manipulated with s...

  1. Circumferential fusion improves outcome in comparison with instrumented posterolateral fusion

    DEFF Research Database (Denmark)

    Videbaek, Tina S; Christensen, Finn B; Soegaard, Rikke;

    2006-01-01

    -36 instrument, and the Low Back Pain Rating Scale. All measures assessed the endpoint outcomes at 5 to 9 years after surgery. RESULTS: The available response rate was 93%. The circumferential group showed a significantly better improvement (P ...STUDY DESIGN: Prospective randomized clinical study with a 5- to 9-year follow-up period. OBJECTIVE: The aim of the present study was to analyze the long-term outcome with respect to functional disability, pain, and general health of patients treated by means of circumferential lumbar fusion...... fusion (titanium Cotrel-Dubousset) or circumferential lumbar fusion (instrumented posterolateral fusion with anterior intervertebral support by a Brantigan cage). The primary outcome measure was the Dallas Pain Questionnaire (DPQ). The secondary outcome measures were the Oswestry Disability Index, the SF...

  2. Advanced fusion concepts: project summaries

    International Nuclear Information System (INIS)

    This report contains descriptions of the activities of all the projects supported by the Advanced Fusion Concepts Branch of the Office of Fusion Energy, US Department of Energy. These descriptions are project summaries of each of the individual projects, and contain the following: title, principle investigators, funding levels, purpose, approach, progress, plans, milestones, graduate students, graduates, other professional staff, and recent publications. Information is given for each of the following programs: (1) reverse-field pinch, (2) compact toroid, (3) alternate fuel/multipoles, (4) stellarator/torsatron, (5) linear magnetic fusion, (6) liners, and (7) Tormac

  3. Fusion Rings for Quantum Groups

    DEFF Research Database (Denmark)

    Andersen, Henning Haahr; Stroppel, Catharina

    2012-01-01

    We study the fusion rings of tilting modules for a quantum group at a root of unity modulo the tensor ideal of negligible tilting modules. We identify them in type A with the combinatorial rings from [12] and give a similar description of the sp2n-fusion ring in terms of noncommutative symmetric...... functions. Moreover we give a presentation of all fusion rings in classical types as quotients of polynomial rings. Finally we also compute the fu- sion rings for type G2....

  4. Controlled fusion and plasma physics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This document presents the several speeches that took place during the 22nd European Physical Society conference on Controlled Fusion and Plasma Physics in Bournemouth, UK, between the 2nd and 7th July 1995. The talks deal with new experiments carried out on several tokamaks, particularly Tore Supra, concerning plasma confinement and fusion. Some information on specific fusion devices or tokamak devices is provided, as well as results of experiments concerning plasma instability. Separate abstracts were prepared for all the 31 papers in this volume. (TEC).

  5. Convenient cell fusion assay for rapid screening for HIV entry inhibitors

    Science.gov (United States)

    Jiang, Shibo; Radigan, Lin; Zhang, Li

    2000-03-01

    Human immunodeficiency viruses (HIV)-induced cell fusion is a critical pathway of HIV spread from infected cells to uninfected cells. A rapid and simple assay was established to measure HIV-induce cell fusion. This study is particularly useful to rapid screen for HIV inhibitors that block HIV cell-to-cell transmission. Present study demonstrated that coculture of HIV-infected cells with uninfected cells at 37 degree(s)C for 2 hours resulted in the highest cell fusion rate. Using this cell fusion assay, we have identified several potent HIV inhibitors targeted to the HIV gp41 core. These antiviral agents can be potentially developed as antiviral drugs for chemotherapy and prophylaxis of HIV infection and AIDS.

  6. Fusion protein of single-chain variable domain fragments for treatment of myasthenia gravis

    Institute of Scientific and Technical Information of China (English)

    Fangfang Li; Fanping Meng; Quanxin Jin; Changyuan Sun; Yingxin Li; Honghua Li; Songzhu Jin

    2014-01-01

    Single-chain variable domain fragment (scFv) 637 is an antigen-specific scFv of myasthenia gravis. In this study, scFv and human serum albumin genes were conjugated and the fusion pro-tein was expressed in Pichia pastoris. The afifnity of scFv-human serum albumin fusion protein to bind to acetylcholine receptor at the neuromuscular junction of human intercostal muscles was detected by immunolfuorescence staining. The ability of the fusion protein to block myas-thenia gravis patient sera binding to acetylcholine receptors and its stability in healthy serum were measured by competitive ELISA. The results showed that the inhibition rate was 2.0-77.4%, and the stability of fusion protein in static healthy sera was about 3 days. This approach suggests the scFv-human serum albumin is a potential candidate for speciifc immunosuppressive therapy of myasthenia gravis.

  7. A Framework to Support the Fusion of Operation and Planning

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yousu; Etingov, Pavel V.; Fitzhenry, Erin B.; Sharma, Poorva; Nguyen, Tony B.; Makarov, Yuri V.; Rice, Mark J.; Allwardt, Craig H.; Widergren, Steven E.

    2015-12-31

    The management of the nation’s power system has progressed to the point where the boundary lines between operations and planning are becoming blurred. The dynamic behavior of smart grid technologies brings pressures of incorporating the predictive capability from planning to enhance operations. These needs are requiring a smoother, better integrated interplay between the functional roles of planning and operations. This paper presents a framework to support the fusion of operation and planning. A case study of predicting the intra-hour deficiency in generation capability and ramping capacity and presenting the outputs to operators was conducted. The study shows the benefits of the fusion and the effectiveness of the framework. All the function blocks used in the study were built upon GridOPTICS Software System (GOSS), a software system middleware platform that facilitates deployment of new applications for the future power grid.

  8. Wavelet Transform based Medical Image Fusion With different fusion methods

    OpenAIRE

    Anjali Patil; M N Tibdewal

    2015-01-01

    This paper proposes wavelet transform based image fusion algorithm, after studying the principles and characteristics of the discrete wavelet transform. Medical image fusion used to derive useful information from multimodality medical images. The idea is to improve the image content by fusing images like computer tomography (CT) and magnetic resonance imaging (MRI) images, so as to provide more information to the doctor and clinical treatment planning system. This paper based on t...

  9. Cold nuclear fusion reactor and nuclear fusion rocket

    OpenAIRE

    Huang Zhenqiang

    2013-01-01

    "Nuclear restraint inertial guidance directly hit the cold nuclear fusion reactor and ion speed dc transformer" [1], referred to as "cold fusion reactor" invention patents, Chinese Patent Application No. CN: 200910129632.7 [2]. The invention is characterized in that: at room temperature under vacuum conditions, specific combinations of the installation space of the electromagnetic field, based on light nuclei intrinsic magnetic moment and the electric field, the first two strings of the nucle...

  10. Skin delivery by block copolymer nanoparticles (block copolymer micelles).

    Science.gov (United States)

    Laredj-Bourezg, Faiza; Bolzinger, Marie-Alexandrine; Pelletier, Jocelyne; Valour, Jean-Pierre; Rovère, Marie-Rose; Smatti, Batoule; Chevalier, Yves

    2015-12-30

    Block copolymer nanoparticles often referred to as "block copolymer micelles" have been assessed as carriers for skin delivery of hydrophobic drugs. Such carriers are based on organic biocompatible and biodegradable materials loaded with hydrophobic drugs: poly(lactide)-block-poly(ethylene glycol) copolymer (PLA-b-PEG) nanoparticles that have a solid hydrophobic core made of glassy poly(d,l-lactide), and poly(caprolactone)-block-poly(ethylene glycol) copolymer (PCL-b-PEG) nanoparticles having a liquid core of polycaprolactone. In vitro skin absorption of all-trans retinol showed a large accumulation of retinol in stratum corneum from both block copolymer nanoparticles, higher by a factor 20 than Polysorbate 80 surfactant micelles and by a factor 80 than oil solution. Additionally, skin absorption from PLA-b-PEG nanoparticles was higher by one order of magnitude than PCL-b-PEG, although their sizes (65nm) and external surface (water-swollen PEG layer) were identical as revealed by detailed structural characterizations. Fluorescence microscopy of histological skin sections provided a non-destructive picture of the storage of Nile Red inside stratum corneum, epidermis and dermis. Though particle cores had a different physical states (solid or liquid as measured by (1)H NMR), the ability of nanoparticles for solubilization of the drug assessed from their Hildebrand solubility parameters appeared the parameter of best relevance regarding skin absorption.

  11. Cold nuclear fusion reactor and nuclear fusion rocket

    Directory of Open Access Journals (Sweden)

    Huang Zhenqiang

    2013-10-01

    Full Text Available "Nuclear restraint inertial guidance directly hit the cold nuclear fusion reactor and ion speed dc transformer" [1], referred to as "cold fusion reactor" invention patents, Chinese Patent Application No. CN: 200910129632.7 [2]. The invention is characterized in that: at room temperature under vacuum conditions, specific combinations of the installation space of the electromagnetic field, based on light nuclei intrinsic magnetic moment and the electric field, the first two strings of the nuclei to be bound fusion on the same line (track of. Re-use nuclear spin angular momentum vector inherent nearly the speed of light to form a super strong spin rotation gyro inertial guidance features, to overcome the Coulomb repulsion strong bias barrier to achieve fusion directly hit. Similar constraints apply nuclear inertial guidance mode for different speeds and energy ion beam mixing speed, the design of ion speed dc transformer is cold fusion reactors, nuclear fusion engines and such nuclear power plants and power delivery systems start important supporting equipment, so apply for a patent merger

  12. Systematic analysis of advanced fusion fuel in inertial fusion energy

    Science.gov (United States)

    Velarde, G.; Eliezer, S.; Henis, Z.; Piera, M.; Martinez-Val, J. M.

    1997-04-01

    Aneutronic fusion reactions can be considered as the cleanest way to exploit nuclear energy. However, these reactions present in general two main drawbacks.—very high temperatures are needed to reach relevant values of their cross sections—Moderate (and even low) energy yield per reaction. This value is still lower if measured in relation to the Z number of the reacting particles. It is already known that bremsstrahlung overruns the plasma reheating by fusion born charged-particles in most of the advanced fuels. This is for instance the case for proton-boron-11 fusion in a stoichiometric plasma and is also so in lithium isotopes fusion reactions. In this paper, the use of deuterium-tritium seeding is suggested to allow to reach higher burnup fractions of advanced fuels, starting at a lower ignition temperature. Of course, neutron production increases as DT contents does. Nevertheless, the ratio of neutron production to energy generation is much lower in DT-advanced fuel mixtures than in pure DT plasmas. One of the main findings of this work is that some natural resources (as D and Li-7) can be burned-up in a catalytic regime for tritium. In this case, neither external tritium breeding nor tritium storage are needed, because the tritium inventory after the fusion burst is the same as before it. The fusion reactor can thus operate on a pure recycling of a small tritium inventory.

  13. Laser fusion for generation of electrical power

    International Nuclear Information System (INIS)

    Two types of thermonuclear reactors are considered using lasers for fusion. The pellet implosion fusion technique and the linear or solenoid fusion technique are described in detail. It is pointed out that in spite of difficulties, laser fusion offers a more convenient and advantageous method of producing nuclear energy. Prospects of perfecting laser techniques are discussed. (A.K.)

  14. Fusion rules in conformal field theory

    International Nuclear Information System (INIS)

    Several aspects of fusion rings and fusion rule algebras, and of their manifestations in two-dimensional (conformal) field theory, are described: diagonalization and the connection with modular invariance; the presentation in terms of quotients of polynomial rings; fusion graphs; various strategies that allow for a partial classification; and the role of the fusion rules in the conformal bootstrap programme. (orig.)

  15. Intercellular adhesion molecule 1 promotes HIV-1 attachment but not fusion to target cells.

    Directory of Open Access Journals (Sweden)

    Naoyuki Kondo

    Full Text Available Incorporation of intercellular adhesion molecule 1 (ICAM-1 into HIV-1 particles is known to markedly enhance the virus binding and infection of cells expressing lymphocyte function-associated antigen-1 (LFA-1. At the same time, ICAM-1 has been reported to exert a less pronounced effect on HIV-1 fusion with lymphoid cells. Here we examined the role of ICAM-1/LFA-1 interactions in productive HIV-1 entry into lymphoid cells using a direct virus-cell fusion assay. ICAM-1 promoted HIV-1 attachment to cells in a temperature-dependent manner. It exerted a marginal effect on virus binding in the cold, but enhanced binding up to 4-fold at physiological temperature. ICAM-1-independent attachment in the cold was readily reversible upon subsequent incubation at elevated temperature, whereas ICAM-1-bearing particles were largely retained by cells. The better virus retention resulted in a proportional increase in HIV-1 internalization and fusion, suggesting that ICAM-1 did not specifically accelerate endocytosis or fusion steps. We also measured the rates of CD4 engagement, productive endocytosis and HIV-endosome fusion using specific fusion inhibitors. These rates were virtually independent of the presence of ICAM-1 in viral particles. Importantly, irrespective of the presence of ICAM-1, HIV-1 escaped from the low temperature block, which stopped virus endocytosis and fusion, much later than from a membrane-impermeant fusion inhibitor targeting surface-accessible particles. This result, along with the complete inhibition of HIV-1 fusion by a small molecule dynamin inhibitor, implies this virus enters lymphoid cells used in this study via endocytosis and that this pathway is not altered by the viral ICAM-1. Our data highlight the role of ICAM-1 in stabilizing the HIV-1 attachment to LFA-1 expressing cells, which leads to a proportional enhancement of the receptor-mediated uptake and fusion with endosomes.

  16. Safeguarding fusion reactors. Plea for a proliferation resistant design of nuclear fusion

    International Nuclear Information System (INIS)

    The contribution on safeguarding of thermonuclear fusion reactors covers the following topics: The development of the technology during and after the Cold War, the production of fissile material, the non-civil use of nuclear fusion - hypothetical military use of fusion reactors, options for regulations and design for a peaceful use of nuclear fusion, safeguards of nuclear fusion reactors.

  17. New trends in fusion research

    CERN Document Server

    CERN. Geneva

    2004-01-01

    The efforts of the international fusion community aim at demonstrating the scientific feasibility of thermonuclear fusion energy power plants. Understanding the behavior of burning plasmas, i.e. plasmas with strong self-heating, represents a primary scientific challenge for fusion research and a new science frontier. Although integrated studies will only be possible, in new, dedicated experimental facilities, such as the International Tokamak Experimental Reactor (ITER), present devices can address specific issues in regimes relevant to burning plasmas. Among these are an improvement of plasma performance via a reduction of the energy and particle transport, an optimization of the path to ignition or to sustained burn using additional heating and a control of plasma-wall interaction and energy and particle exhaust. These lectures address recent advances in plasma science and technology that are relevant to the development of fusion energy. Mention will be made of the inertial confinement line of research, but...

  18. Aneutronic Fusion Spacecraft Architecture Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Description: provide framework to realize fusion propulsion for long-range space travel; analyze “hybrid” schemes with a solar or fission primary...

  19. Extreme Lateral Interbody Fusion Procedure

    Medline Plus

    Full Text Available ... with an open procedure, what we call a standard open procedure, it is always a potential for ... and it's considered a lumber -- it's considered a standard lumbar spine fusion. The difference is the approach, ...

  20. Extreme Lateral Interbody Fusion Procedure

    Medline Plus

    Full Text Available ... he should allow for bone fusion in both gaps, those little spaces. Okay, so the question is, ... just placed in there. Again, you see the gaps, these gaps have a reason they are there. ...

  1. Condensed hydrogen for thermonuclear fusion

    International Nuclear Information System (INIS)

    Inertial confinement fusion (ICF) power, in either pure fusion or fission-fusion hybrid reactors, is a possible solution for future world's energy demands. Formation of uniform layers of a condensed hydrogen fuel in ICF targets has been a long standing materials physics challenge. Here, we review the progress in this field. After a brief discussion of the major ICF target designs and the basic properties of condensed hydrogens, we review both liquid and solid layering methods, physical mechanisms causing layer nonuniformity, growth of hydrogen single crystals, attempts to prepare amorphous and nanostructured hydrogens, and mechanical deformation behavior. Emphasis is given to current challenges defining future research areas in the field of condensed hydrogens for fusion energy applications.

  2. Extreme Lateral Interbody Fusion Procedure

    Medline Plus

    Full Text Available ... there, we just get access to the disk space and perform the fusion. And that's all done ... are placed to allow exposure to the disc space. This patient is suffering from severe lumbar spondylosis. ...

  3. Information fusion for palmprint authentication

    Science.gov (United States)

    Wu, Xiangqian; Wang, Kuanquan; Zhang, David

    2006-04-01

    A palmprint can be represented using different features and the different representations reflect the different characteristic of a palmprint. Fusion of multiple palmprint features may enhance the performance of a palmprint authentication system. This paper investigates the fusion of two types of palmprint information: the phase (called PalmCode) and the orientation (called OrientationCode). The PalmCode is extracted using the 2-D Gabor filters based algorithm and the OrientationCode is computed using several directional templates. Then several fusion strategies are investigated and compared. The experimental results show that the fusion of the PalmCode and OrientationCode using the Product, Sum and Weighted Sum strategies can greatly improve the accuracy of palmprint authentication, which is up to 99.6%.

  4. Distributed multi-sensor fusion

    Science.gov (United States)

    Scheffel, Peter; Fish, Robert; Knobler, Ron; Plummer, Thomas

    2008-03-01

    McQ has developed a broad based capability to fuse information in a geographic area from multiple sensors to build a better understanding of the situation. The paper will discuss the fusion architecture implemented by McQ to use many sensors and share their information. This multi sensor fusion architecture includes data sharing and analysis at the individual sensor, at communications nodes that connect many sensors together, at the system server/user interface, and across multi source information available through networked services. McQ will present a data fusion architecture that integrates a "Feature Information Base" (FIB) with McQ's well known Common Data Interchange Format (CDIF) data structure. The distributed multi sensor fusion provides enhanced situation awareness for the user.

  5. Getting started with Clickteam Fusion

    CERN Document Server

    Brunner, Jürgen

    2014-01-01

    An easy-to-understand, step-by-step guide that shows you how to create 2D video games with Clickteam Fusion. You will learn the magic of game development from scratch without any knowledge of scripting languages.This book is for game enthusiasts who want to create their own 2D video games. No prior knowledge of programming or Multimedia Fusion 2 is necessary.

  6. Cyclic Processing for Context Fusion

    OpenAIRE

    Kjærgaard, Mikkel Baun

    2007-01-01

    Many machine-learning techniques use feedback information. However, current context fusion systems do not support this because they constrain processing to be structured as acyclic processing. This paper proposes a generalization which enables the use of cyclic processing in context fusion systems. A solution is proposed to the inherent problem of how to avoid uncontrollable looping during cyclic processing. The solution is based on finding cycles using graph-coloring and breaking cycles usin...

  7. Simulation science for fusion plasmas

    International Nuclear Information System (INIS)

    The world fusion effort has embarked into a new age with the construction of ITER in Cadarache, France, which will be the first magnetic confinement fusion plasma experiment dominated by the self-heating of fusion reactions. In order to operate and control burning plasmas and next generation demo fusion reactors, an advanced capability for comprehensive integrated computer simulations that are fully verified and validated against experimental data will be necessary. The ultimate goal is to predict reliably the behaviour of plasmas in toroidal magnetic confinement devices on all relevant scales, both in time and space. In addition to developing a sophisticated integrated simulation codes, directed advanced research in fusion physics, applied mathematics, computer science and software is envisaged. In this paper we review the basic strategy and main research efforts at the Department of Simulation Science of the National Institute for Fusion Science (NIFS)- which is the Inter University Institute and the coordinating Center of Excellence for academic fusion research in Japan. We overview a simulation research at NIFS, in particular relation to experiments in the Large Helical Device (LHD), the world's largest superconducting heliotron device, as a National Users' facility (see Motojima et al.). Our main goal is understanding and systemizing the rich hierarchy of physical mechanisms in fusion plasmas, supported by exploring a basic science of complexity of plasma as a highly nonlinear, non-equilibrium, open system. The aim is to establish a simulation science as a new interdisciplinary field by fostering collaborative research in utilizing the large-scale supercomputer simulators. A concept of the hierarchy-renormalized simulation modelling will be invoked en route toward the LHD numerical test reactor.

  8. Hydrogen Production in Fusion Reactors

    OpenAIRE

    Sudo, S.; Tomita, Y.; Yamaguchi, S.; Iiyoshi, A.; Momota, H.; Motojima, O.; Okamoto, M; Ohnishi, M.; Onozuka, M.; Uenosono, C.

    1993-01-01

    As one of methods of innovative energy production in fusion reactors without having a conventional turbine-type generator, an efficient use of radiation produced in a fusion reactor with utilizing semiconductor and supplying clean fuel in a form of hydrogen gas are studied. Taking the candidates of reactors such as a toroidal system and an open system for application of the new concepts, the expected efficiency and a concept of plant system are investigated.

  9. Fusion technology 1988. V. 2

    International Nuclear Information System (INIS)

    These proceedings comprise two volumes and contain both the invited lectures and the contributed papers presented at the Symposium. The relatively large number of 23 invited lectures gave a broad overview of the problems fusion tecnology is facing both now and in the future. Over half the papers presented in these two volumes concentrate on the technologies of future fusion devices, mainly possible Next Step devices, such as NET or ITER. refs.; figs.; tabs

  10. Data Fusion and Sensors Model

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, we take the model of Laser range finder based on synchronized scanner as example, show how to use data fusion method in the process of sensor model designing to get more robust output. Also we provide our idea on the relation of sensor model, data fusion and system structure, and in the paper, there is a solution that transform the parameter space to get linear model for Kalman filter.

  11. Swedish thermometer for fusion reactors

    International Nuclear Information System (INIS)

    A neutron spectrometer called Tansy, which can measure temperatures in a fusion reactor, has been developed in the Department of Reactor Physics at Chalmers University of Technology in Gothenburg, Sweden. The instrument has been designed, constructed and tested over the past eight years and it has become one of Sweden's contributions of scientific know-how to the JET (Joint European Torus) fusion centre in Britain. A thesis by Dr. D. Aronsson entitled 'The development of a spectrometer for 14MeV neutrons from fusion' describes his part in the development of the instrument. Hydrogen fusion could become an important future source of energy provided we learn to use it properly, he says. As the release of energy during fusion takes place at such high temperatures, the plasma (fuel) can only be kept in place by strong magnetic fields. One way to measure temperatures of such magnitude is to study the neutrons scattered by the process. With the aid of Tansy, it is possible to study the variations in speed between different neutrons emerging from the fusion process at an average speed of 50,000 km/sec. The basic principle is quite simple; the released neutrons hit a thin polyethylene foil and some of them collide with the hydrogen atom nuclei. After the collision, the particles continue in different directions. Tansy has a system of detectors which can register and identify the two types of particles at the same time. A computer can then use this information together with knowledge about the effects of the collision to calculate the speed of the neutrons released by the fusion, and from this determine the temperature at combustion. In its present form, Tansy is a one-off and will probably not be produced again, Dr. Aronsson says, but the principle is likely to be used again. If fusion becomes an energy producing method of the future, instruments like Tansy will be needed to control the process

  12. BNL heavy ion fusion program

    International Nuclear Information System (INIS)

    A principal attraction of heavy ion fusion is that existing accelerator technology and theory are sufficiently advanced to allow one to commence the design of a machine capable of igniting thermonuclear explosions. There are, however, a number of features which are not found in existing accelerators built for other purposes. The main thrust of the BNL Heavy Ion Fusion program has been to explore these features. Longitudinal beam bunching, very low velocity acceleration, and space charge neutralization are briefly discussed

  13. Diagnosing Cervical Fusion: A Comprehensive Literature Review

    OpenAIRE

    Sethi, Nanin; Devney, James; Steiner, Holly L.; Riew, K. Daniel

    2008-01-01

    Study Design Comprehensive literature review. Purpose To document the criteria for fusion utilized in these studies to determine if a consensus on the definition of a solid fusion exists. Overview of Literature Numerous studies have reported on fusion rates following anterior cervical arthrodesis. There is a wide discrepancy in the fusion rates in these studies. While factors such as graft type, Instrumentation, and technique play a factor in fusion rate, another reason for the difference may...

  14. Fusion Rules for Extended Current Algebras

    OpenAIRE

    Baver, Ernest; Gepner, Doron

    1996-01-01

    The initial classification of fusion rules have shown that rational conformal field theory is very limited. In this paper we study the fusion rules of extend ed current algebras. Explicit formulas are given for the S matrix and the fusion rules, based on the full splitting of the fixed point fields. We find that in s ome cases sensible fusion rules are obtained, while in others this procedure lea ds to fractional fusion constants.

  15. Point mutations in EBV gH that abrogate or differentially affect B cell and epithelial cell fusion

    OpenAIRE

    Wu, Liguo; Lindsey M Hutt-Fletcher

    2007-01-01

    Cell fusion mediated by Epstein-Barr virus requires three conserved glycoproteins, gB and gHgL, but activation is cell type specific. B cell fusion requires interaction between MHC-class II and a fourth virus glycoprotein, gp42, which complexes non-covalently with gHgL. Epithelial cell fusion requires interaction between gHgL and a novel epithelial cell coreceptor and is blocked by excess gp42. We show here that gp42 interacts directly with gH and that point mutations in the region of gH reco...

  16. Data Fusion in Information Retrieval

    CERN Document Server

    Wu, Shengli

    2012-01-01

    The technique of data fusion has been used extensively in information retrieval due to the complexity and diversity of tasks involved such as web and social networks, legal, enterprise, and many others. This book presents both a theoretical and empirical approach to data fusion. Several typical data fusion algorithms are discussed, analyzed and evaluated. A reader will find answers to the following questions, among others: -          What are the key factors that affect the performance of data fusion algorithms significantly? -          What conditions are favorable to data fusion algorithms? -          CombSum and CombMNZ, which one is better? and why? -          What is the rationale of using the linear combination method? -          How can the best fusion option be found under any given circumstances?

  17. TRITIUM ACCOUNTANCY IN FUSION SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J. E.; Farmer, D. A.; Moore, M. L.; Tovo, L. L.; Poore, A. S.; Clark, E. A.; Harvel, C. D.

    2014-03-06

    The US Department of Energy (DOE) has clearly defined requirements for nuclear material control and accountability (MC&A) of tritium whereas the International Atomic Energy Agency (IAEA) does not since tritium is not a fissile material. MC&A requirements are expected for tritium fusion machines and will be dictated by the host country or regulatory body where the machine is operated. Material Balance Areas (MBAs) are defined to aid in the tracking and reporting of nuclear material movements and inventories. Material subaccounts (MSAs) are established along with key measurement points (KMPs) to further subdivide a MBA to localize and minimize uncertainties in the inventory difference (ID) calculations for tritium accountancy. Fusion systems try to minimize tritium inventory which may require continuous movement of material through the MSAs. The ability of making meaningful measurements of these material transfers is described in terms of establishing the MSA structure to perform and reconcile ID calculations. For fusion machines, changes to the traditional ID equation will be discussed which includes breading, burn-up, and retention of tritium in the fusion device. The concept of “net” tritium quantities consumed or lost in fusion devices is described in terms of inventory taking strategies and how it is used to track the accumulation of tritium in components or fusion machines.

  18. Tritium accountancy in fusion systems

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J.E.; Clark, E.A.; Harvel, C.D.; Farmer, D.A.; Tovo, L.L.; Poore, A.S. [Savannah River National Laboratory, Aiken, SC (United States); Moore, M.L. [Savannah River Nuclear Solutions, Aiken, SC (United States)

    2015-03-15

    The US Department of Energy (DOE) has clearly defined requirements for nuclear material control and accountability (MCA) of tritium whereas the International Atomic Energy Agency (IAEA) does not since tritium is not a fissile material. MCA requirements are expected for tritium fusion machines and will be dictated by the host country or regulatory body where the machine is operated. Material Balance Areas (MBA) are defined to aid in the tracking and reporting of nuclear material movements and inventories. Material sub-accounts (MSA) are established along with key measurement points (KMP) to further subdivide a MBA to localize and minimize uncertainties in the inventory difference (ID) calculations for tritium accountancy. Fusion systems try to minimize tritium inventory which may require continuous movement of material through the MSA. The ability of making meaningful measurements of these material transfers is described in terms of establishing the MSA structure to perform and reconcile ID calculations. For fusion machines, changes to the traditional ID equation will be discussed which includes breeding, burn-up, and retention of tritium in the fusion device. The concept of 'net' tritium quantities consumed or lost in fusion devices is described in terms of inventory taking strategies and how it is used to track the accumulation of tritium in components or fusion machines. (authors)

  19. Seismic analysis of the mirror fusion test facility shielding vault

    International Nuclear Information System (INIS)

    This report presents a seismic analysis of the vault in Building 431 at Lawrence Livermore National Laboratory which houses the mirror Fusion Test Facility. The shielding vault structure is approximately 120 ft long by 80 ft wide and is constructed of concrete blocks approximately 7 x 7 x 7 ft. The north and south walls are approximately 53 ft high and the east wall is approximately 29 ft high. These walls are supported on a monolithic concrete foundation that surrounds a 21-ft deep open pit. Since the 53-ft walls appeared to present the greatest seismic problem they were the first investigated

  20. Block Matching for Object Tracking

    Energy Technology Data Exchange (ETDEWEB)

    Gyaourova, A; Kamath, C; Cheung, S

    2003-10-13

    Models which describe road traffic patterns can be helpful in detection and/or prevention of uncommon and dangerous situations. Such models can be built by the use of motion detection algorithms applied to video data. Block matching is a standard technique for encoding motion in video compression algorithms. We explored the capabilities of the block matching algorithm when applied for object tracking. The goal of our experiments is two-fold: (1) to explore the abilities of the block matching algorithm on low resolution and low frame rate video and (2) to improve the motion detection performance by the use of different search techniques during the process of block matching. Our experiments showed that the block matching algorithm yields good object tracking results and can be used with high success on low resolution and low frame rate video data. We observed that different searching methods have small effect on the final results. In addition, we proposed a technique based on frame history, which successfully overcame false motion caused by small camera movements.

  1. PERSON AUTHENTICATION USING MULTIPLE SENSOR DATA FUSION

    Directory of Open Access Journals (Sweden)

    S. Vasuhi

    2011-04-01

    Full Text Available This paper proposes a real-time system for face authentication, obtained through fusion of Infra Red (IR and visible images. In order to identify the unknown person authentication in highly secured areas, multiple algorithms are needed. The four well known algorithms for face recognition, Block Independent Component Analysis(BICA, Kalman Filtering(KF method, Discrete Cosine Transform(DCT and Orthogonal Locality Preserving Projections (OLPP are used to extract the features. If the data base size is very large and the features are not distinct then ambiguity will exists in face recognition. Hence more than one sensor is needed for critical and/or highly secured areas. This paper deals with multiple fusion methodology using weighted average and Fuzzy Logic. The visible sensor output depends on the environmental condition namely lighting conditions, illumination etc., to overcome this problem use histogram technique to choose appropriate algorithm. DCT and Kalman filtering are holistic approaches, BICA follows feature based approach and OLPP preserves the Euclidean structure of face space. These recognizers are capable of considering the problem of dimensionality reduction by eliminating redundant features and reducing the feature space. The system can handle variations like illumination, pose, orientation, occlusion, etc. up to a significant level. The integrated system overcomes the drawbacks of individual recognizers. The proposed system is aimed at increasing the accuracy of the person authentication system and at the same time reducing the limitations of individual algorithms. It is tested on real time database and the results are found to be 96% accurate.

  2. Climatological features of blocking anticyclones

    International Nuclear Information System (INIS)

    Several climatological studies have been previously performed using large observational data sets (i.e., 10 years or longer) in order to determine the predominant characteristics of blocking anticyclones, including favored development regions, duration, preferred seasonal occurrence, and frequency of occurrence. These studies have shown that blocking anticyclones occur most frequently from October to April over the eastern Atlantic and Pacific oceans downstream from both the North American and Asian continental regions and the storm track regions to the east of these continents. Some studies have also revealed the presence of a third region block formation in western Russia near 40 degrees E which is associated with another storm track region over the Mediterranean and western Asia

  3. Projectors, Shadows, and Conformal Blocks

    CERN Document Server

    Simmons-Duffin, David

    2012-01-01

    We introduce a method for computing conformal blocks of operators in arbitrary Lorentz representations in any spacetime dimension, making it possible to apply bootstrap techniques to operators with spin. The key idea is to implement the "shadow formalism" of Ferrara, Gatto, Grillo, and Parisi in a setting where conformal invariance is manifest. Conformal blocks in d-dimensions can be expressed as integrals over the projective null-cone in the "embedding space" R^{d+1,1}. Taking care with their analytic structure, these integrals can be evaluated in great generality, reducing the computation of conformal blocks to a bookkeeping exercise. To facilitate calculations in four-dimensional CFTs, we introduce techniques for writing down conformally-invariant correlators using auxiliary twistor variables, and demonstrate their use in some simple examples.

  4. Block ground interaction of rockfalls

    Science.gov (United States)

    Volkwein, Axel; Gerber, Werner; Kummer, Peter

    2016-04-01

    During a rockfall the interaction of the falling block with the ground is one of the most important factors that define the evolution of a rockfall trajectory. It steers the rebound, the rotational movement, possibly brake effects, friction losses and damping effects. Therefore, if most reliable rockfall /trajectory simulation software is sought a good understanding of the block ground interaction is necessary. Today's rockfall codes enable the simulation of a fully 3D modelled block within a full 3D surface . However, the details during the contact, i.e. the contact duration, the penetration depth or the dimension of the marks in the ground are usually not part of the simulation. Recent field tests with rocks between 20 and 80 kg have been conducted on a grassy slope in 2014 [1]. A special rockfall sensor [2] within the blocks measured the rotational velocity and the acting accelerations during the tests. External video records and a so-called LocalPositioningSystem deliver information on the travel velocity. With these data not only the flight phases of the trajectories but also the contacts with the ground can be analysed. During the single jumps of a block the flight time, jump length, the velocity, and the rotation are known. During the single impacts their duration and the acting accelerations are visible. Further, the changes of rotational and translational velocity influence the next jump of the block. The change of the rotational velocity over the whole trajectory nicely visualizes the different phases of a rockfall regarding general acceleration and deceleration in respect to the inclination and the topography of the field. References: [1] Volkwein A, Krummenacher B, Gerber W, Lardon J, Gees F, Brügger L, Ott T (2015) Repeated controlled rockfall trajectory testing. [Abstract] Geophys. Res. Abstr. 17: EGU2015-9779. [2] Volkwein A, Klette J (2014) Semi-Automatic Determination of Rockfall Trajectories. Sensors 14: 18187-18210.

  5. OPAL 96 Blocks Lead Glass

    CERN Multimedia

    This array of 96 lead glass bricks formed part of the OPAL electromagnetic calorimeter. One half of the complete calorimeter is shown in the picture above. There were 9440 lead glass counters in the OPAL electromagnetic calorimeter. These are made of Schott type SF57 glass and each block weighs about 25 kg and consists of 76% PbO by weight. Each block has a Hamamatsu R2238 photomultiplier glued on to it. The complete detector was in the form of a cylinder 7m long and 6m in diameter. It was used to measure the energy of electrons and photons produced in LEP interactions.

  6. Novel Hydrophobin Fusion Tags for Plant-Produced Fusion Proteins

    Science.gov (United States)

    Ritala, Anneli; Linder, Markus; Joensuu, Jussi

    2016-01-01

    Hydrophobin fusion technology has been applied in the expression of several recombinant proteins in plants. Until now, the technology has relied exclusively on the Trichoderma reesei hydrophobin HFBI. We screened eight novel hydrophobin tags, T. reesei HFBII, HFBIII, HFBIV, HFBV, HFBVI and Fusarium verticillioides derived HYD3, HYD4 and HYD5, for production of fusion proteins in plants and purification by two-phase separation. To study the properties of the hydrophobins, we used N-terminal and C-terminal GFP as a fusion partner. Transient expression of the hydrophobin fusions in Nicotiana benthamiana revealed large variability in accumulation levels, which was also reflected in formation of protein bodies. In two-phase separations, only HFBII and HFBIV were able to concentrate GFP into the surfactant phase from a plant extract. The separation efficiency of both tags was comparable to HFBI. When the accumulation was tested side by side, HFBII-GFP gave a better yield than HFBI-GFP, while the yield of HFBIV-GFP remained lower. Thus we present here two alternatives for HFBI as functional fusion tags for plant-based protein production and first step purification. PMID:27706254

  7. Fusion technology programme

    International Nuclear Information System (INIS)

    In the water cooled INTOR blanket modules a loss of coolant accident will result in melting of the lead rods after 1 minute and of the ss first wall after 3 minutes. Also partial melting and evaporization of the ss first wall as caused by plasma disruption was analysed. Part of the UKCTR-IIIA neutron reaction cross section data library is based on calculations using the nuclear-model code THRES-2. Results of a revision using the modified THRES-F code are reported. A combined preequilibrium and equilibrium model was applied for calculation of neutron emission spectra and of their angular distributions. Neutron transport calculations are reported to determine the polodial distribution of activation of various threshold detectors, which will be placed on the plasma chamber of JET as part of the diagnostic system. In vanadium the preinjection of helium by means of cyclotron irradiation is shown to lead to a lower cavity concentration and a slightly larger cavity size as a result of a following fast neutron irradiation in the core of the HFR reactor. In the V - 1% Cr - 0.1% Ti alloy preinjected helium has the opposite effect on cavity concentration and size. The ratio between helium production and displacement damage in ss 316 by irradiation in the HFR is shown to meet the fusion reactor condition. The development of high current superconducting niobium-tin cables is introduced as a new activity at ECN. Results are shown of a technique for welding multifilament wires. The conductor concept for a small prototype toroidal field coil is presented. Progress is reported of fabrication of a 8 Tesla niobium-titanium insert coil for the SULTAN conductor test facility

  8. Expected effect of fusion reactor on global environment. Nuclear fusion as a global warming mitigation technology

    International Nuclear Information System (INIS)

    This paper outlines the use of nuclear fusion as a global warming mitigation technology. Life cycle CO2 emission from a nuclear fusion plant is quite low; it is comparable to that of nuclear fission. Nuclear fusion has the potential to contribute future energy systems and environment. The technological feasibility of nuclear fusion should be demonstrated in order to begin clarifying the potential contribution of nuclear fusion as well as to educate those outside of the fusion community about its potential. (author)

  9. Wavelet-Based Digital Image Fusion on Reconfigurable FPGA Using Handel-C Language

    Directory of Open Access Journals (Sweden)

    Dr. G. Mohan

    2013-07-01

    Full Text Available Field Programmable Gate Array (FPGA technology has become a viable target for the implementation of real time algorithms in different fusion methods have been proposed mainly in the fields of remote sensing and computer vision. Image fusion is basically a process where multiple images (more than one are combined to form a single resultant fused image. This fused image is more productive as compared to its original input images. In most paper image fusion algorithms were implemented in simulation level only. In this paper Wavelet based Image fusion algorithm is employed and implemented on a Field-Programmable-Gate-Array-based hardware system using a Xilinx Platform Studio EDK 11.1 FPGA Spartan 3E is implemented. The FPGA technologies offer basic digital blocks with flexible interconnections to achieve high speed digital hardware realization. The FPGA consists of a system of logic blocks, such as Look up Tables, gates, or flip-flops and some amount of memory. The algorithm will be transferred from computer to FPGA board using JTAG cable. In this proposed work algorithm is developed by using Handle –C language to performing wavelet based image fusion. The result will be transferred back to system to analyze hardware resource taken by FPGA

  10. Fusion Plasma Theory project summaries

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This Project Summary book is a published compilation consisting of short descriptions of each project supported by the Fusion Plasma Theory and Computing Group of the Advanced Physics and Technology Division of the Department of Energy, Office of Fusion Energy. The summaries contained in this volume were written by the individual contractors with minimal editing by the Office of Fusion Energy. Previous summaries were published in February of 1982 and December of 1987. The Plasma Theory program is responsible for the development of concepts and models that describe and predict the behavior of a magnetically confined plasma. Emphasis is given to the modelling and understanding of the processes controlling transport of energy and particles in a toroidal plasma and supporting the design of the International Thermonuclear Experimental Reactor (ITER). A tokamak transport initiative was begun in 1989 to improve understanding of how energy and particles are lost from the plasma by mechanisms that transport them across field lines. The Plasma Theory program has actively-participated in this initiative. Recently, increased attention has been given to issues of importance to the proposed Tokamak Physics Experiment (TPX). Particular attention has been paid to containment and thermalization of fast alpha particles produced in a burning fusion plasma as well as control of sawteeth, current drive, impurity control, and design of improved auxiliary heating. In addition, general models of plasma behavior are developed from physics features common to different confinement geometries. This work uses both analytical and numerical techniques. The Fusion Theory program supports research projects at US government laboratories, universities and industrial contractors. Its support of theoretical work at universities contributes to the office of Fusion Energy mission of training scientific manpower for the US Fusion Energy Program.

  11. Japanese strategy of fusion roadmap

    International Nuclear Information System (INIS)

    Technology bases required for realization of a fusion demonstration reactor (DEMO) have been discussed in the Japanese fusion community. The Join-Core Team, which was launched by ministerial council, has considered the following issues to develop strategy for the establishment of technology bases for a DEMO: (1) Concept of DEMO premised for investigation, (2) Activities requiring commitment and their goals, and (3) Scientific and technological review works for the above mentioned activities. The team summarized the issues as Joint-Core Team Report (Basic Concept of DEMO and Structure of Technological Issues). This report describes the basic concept of DEMO premised for investigation and the structure of technological issues to ensure the feasibility of the DEMO concept. Also the team clarified tasks regarding the development of the design of DEMO, and the research and development programs to resolve the issues and to provide the required evidence to support the design into the consistent timeline, which is summarized in the second Joint-Core Team Report (Chart of Establishment of Technology Bases for DEMO). The reports show that DEMO is steady power generator with several hundred thousand kilowatts being able to extend to commercialization. Also function of tritium bleeding to fulfil self-sufficiency of fuels should be equipped. Required technological activities (superconducting coils, blanket, divertor, heating and current drive systems etc.) are arranged in the chart. JAEA has established the Joint Special Design Team for Fusion DEMO in cooperation with NIFS, industry, and universities and reinforces design activity of a tokamak DEMO. Two important tasks still remain to define the roadmap of development of DEMO in future, that is, socio-economic examination of fusion energy and review of alternative approaches of helical magnetic fusion system and laser fusion system. In particular, solution of the latter task should be found under the deep discussion with

  12. Fusion Plasma Theory project summaries

    International Nuclear Information System (INIS)

    This Project Summary book is a published compilation consisting of short descriptions of each project supported by the Fusion Plasma Theory and Computing Group of the Advanced Physics and Technology Division of the Department of Energy, Office of Fusion Energy. The summaries contained in this volume were written by the individual contractors with minimal editing by the Office of Fusion Energy. Previous summaries were published in February of 1982 and December of 1987. The Plasma Theory program is responsible for the development of concepts and models that describe and predict the behavior of a magnetically confined plasma. Emphasis is given to the modelling and understanding of the processes controlling transport of energy and particles in a toroidal plasma and supporting the design of the International Thermonuclear Experimental Reactor (ITER). A tokamak transport initiative was begun in 1989 to improve understanding of how energy and particles are lost from the plasma by mechanisms that transport them across field lines. The Plasma Theory program has actively-participated in this initiative. Recently, increased attention has been given to issues of importance to the proposed Tokamak Physics Experiment (TPX). Particular attention has been paid to containment and thermalization of fast alpha particles produced in a burning fusion plasma as well as control of sawteeth, current drive, impurity control, and design of improved auxiliary heating. In addition, general models of plasma behavior are developed from physics features common to different confinement geometries. This work uses both analytical and numerical techniques. The Fusion Theory program supports research projects at US government laboratories, universities and industrial contractors. Its support of theoretical work at universities contributes to the office of Fusion Energy mission of training scientific manpower for the US Fusion Energy Program

  13. Kinetic advantage of controlled intermediate nuclear fusion

    Science.gov (United States)

    Guo, Xiaoming

    2012-09-01

    The dominated process of controlled fusion is to let nuclei gain enough kinetic energy to overcome Coulomb barrier. As a result, a fusion scheme can consider two factors in its design: to increase kinetic energy of nuclei and to alter the Coulomb barrier. Cold Fusion and Hot fusion are all one-factor schemes while Intermediate Fusion is a twofactors scheme. This made CINF kinetically superior. Cold Fusion reduces deuteron-deuteron distance, addressing Coulomb barrier, and Hot Fusion heat up plasma into extreme high temperature, addressing kinetic energy. Without enough kinetic energy made Cold Fusion skeptical. Extreme high temperature made Hot Fusion very difficult to engineer. Because CIFN addresses both factors, CIFN is a more promising technique to be industrialized.

  14. Planning Block Play Experiences for Young Children.

    Science.gov (United States)

    Baker, Betty Ruth

    Playing with blocks can facilitate the creative, social, emotional, physical, and cognitive development of young children. This article presents information and activities concerning block play and its role in young children's experience. Topics covered include: (1) types of blocks; (2) selection of blocks and accessories; (3) planning of the…

  15. Recent developments concerning the fusion; Developpements recents sur la fusion

    Energy Technology Data Exchange (ETDEWEB)

    Jacquinot, J. [CEA/Cadarache, Dept. de Recherches sur la Fusion Controlee, DRFC, 13 - Saint Paul lez Durance (France); Andre, M. [CEA/DAM Ile de France, 91 - Bruyeres Le Chatel (France); Aymar, R. [ITER Joint Central Team Garching, Muenchen (Germany)] [and others

    2000-09-04

    Organized the 9 march 2000 by the SFEN, this meeting on the european program concerning the fusion, showed the utility of the exploitation and the enhancement of the actual technology (JET, Tore Supra, ASDEX) and the importance of the Europe engagement in the ITER program. The physical stakes for the magnetic fusion have been developed with a presentation of the progresses in the knowledge of the stability limits. A paper on the inertial fusion was based on the LMJ (Laser MegaJoule) project. The two blanket concepts chosen in the scope of the european program on the tritium blankets, have been discussed. These concepts will be validated by irradiation tests in the ITER-FEAT and adapted for a future reactor. (A.L.B.)

  16. Nuclear Fusion with Polarized Nucleons & PolFusion

    CERN Document Server

    Engels, Ralf; Büscher, Markus; Vasilyev, Alexander

    2016-01-01

    This book offers a detailed examination of the latest work on the potential of polarized fuel to realize the vision of energy production by nuclear fusion. It brings together contributions from nuclear physicists and fusion physicists with the aims of fostering exchange of information between the two communities, describing the current status in the field, and examining new ideas and projects under development. It is evident that polarized fuel can offer huge improvements for the first generation of fusion reactors and open new technological possibilities for future generations, including neutron lean reactors, which could be the most popular and sustainable energy production option to avoid environmental problems. Nevertheless, many questions must be resolved before polarized fuel can be used for energy production in the different reactor types. Readers will find this book to be a stimulating source of information on the key issues. It is based on contributions from leading scientists delivered at the meetin...

  17. Blocking transcription of the human rhodopsin gene by triplex-mediated DNA photocrosslinking

    OpenAIRE

    Intody, Zsofia; Perkins, Brian D.; Wilson, John H.; Wensel, Theodore G.

    2000-01-01

    To explore the ability of triplex-forming oligodeoxyribonucleotides (TFOs) to inhibit genes responsible for dominant genetic disorders, we used two TFOs to block expression of the human rhodopsin gene, which encodes a G protein-coupled receptor involved in the blinding disorder autosomal dominant retinitis pigmentosa. Psoralen-modified TFOs and UVA irradiation were used to form photoadducts at two target sites in a plasmid expressing a rhodopsin–EGFP fusion, which was then transfected into HT...

  18. First Degree Pacemaker Exit Block

    Directory of Open Access Journals (Sweden)

    Johnson Francis

    2016-10-01

    Full Text Available Usually atrial and ventricular depolarizations follow soon after the pacemaker stimulus (spike on the ECG. But there can be an exit block due to fibrosis at the electrode - tissue interface at the lead tip. This can increase the delay between the spike and atrial or ventricular depolarization.

  19. Building Blocks for Personal Brands

    Science.gov (United States)

    Thomas, Lisa Carlucci

    2011-01-01

    In this article, the author discusses the four essential building blocks for personal brands: (1) name; (2) message; (3) channels; and (4) bridges. However, outstanding building materials can only take a person so far. The author emphasizes that vision, determination, faith, a sense of humor, and humility are also required.

  20. Scattering matrices with block symmetries

    OpenAIRE

    Życzkowski, Karol

    1997-01-01

    Scattering matrices with block symmetry, which corresponds to scattering process on cavities with geometrical symmetry, are analyzed. The distribution of transmission coefficient is computed for different number of channels in the case of a system with or without the time reversal invariance. An interpolating formula for the case of gradual time reversal symmetry breaking is proposed.