Phased-array technology for automatic pipeline inspection; Phased Array-Technologie fuer automatisierte Pipeline-Inspektion

Energy Technology Data Exchange (ETDEWEB)

Bosch, J.; Hugger, A.; Franz, J. [GE Energy, PII Pipetronix GmbH, Stutensee (Germany); Falter, S.; Oberdoerfer, Y. [GE Inspection Technology Systems, Huerth (Germany)

2004-07-01

Pipeline inspection pigs with individual test probes are limited in their function due to the fixed arrangement of sensors on the support. In contrast, the phased-array technology enables multitasking of tests, e.g. stress and corrosion testing which formerly required two different test runs with different sensor set-ups. The angles of inclination can be adapted to the test medium, and virtual sensors can be matched in size and overlap so that, e.g., small pittings will be detected. The sensor set-up presented here enables higher test speed and improved flaw detection. The contribution describes the measuring principle, the inspection pig (UltraScan DUO), and some results of prototype measurements. [German] Pruefmolche fuer die Pipelinepruefung mit Einzelpruefkoepfen sind in ihrem Funktionsumfang aufgrund der festliegenden Anordnung der Sensoren im Sensortraeger eingeschraenkt. Die Phased-Array-Technologie gestattet die simultane Durchfuehrung verschiedener Pruefaufgaben, wie beispielsweise der Rissund der Korrosionspruefung, die vorher zwei Prueflaeufe mit verschiedenen Sensortraegern erforderten. Die Einfallswinkel koennen auf das jeweilige Medium angepasst werden, und es besteht die Moeglichkeit, virtuelle Sensoren bezueglich ihrer Groesse und der gegenseitigen Ueberlappung so anzupassen, dass beispielsweise kleine Pittings gefunden werden koennen. Die ausgefuehrte Form gestattet hoehere Pruefgeschwindigkeit und verbesserte Fehlerauffindung. In diesem Artikel werden das Messprinzip und der Inspektionsmolch (UltraScan DUO) beschrieben sowie einige Prototyp-Messergebnisse vorgestellt.

Mechatronic Carlab - Eine System-Entwicklungsumgebung mit realen und virtuellen mechatronischen Fahrzeug-Komponenten

OpenAIRE

Bünte, Tilman

2004-01-01

Bei der Entwicklung mechatronischer Komponenten sind verschiedene Ingenieurdisziplinen beteiligt: Das Fachwissen auf dem Gebiet Mechanik, Elektronik und Informatik ist gefragt, wenn auf kleinem Raum die unterschiedlichsten Funktionen zu einem Produkt integriert werden. Beim DLR in Oberpfaffenhofen hat diese Technologie schon Tradition - ein großes Anwendungsfeld ist inzwischen die Fahrzeugtechnik

Hybride textuelle Strukturen und hybride textuelle Einheiten. Ein Beitrag zur Theorie der Wörterbuchform

Directory of Open Access Journals (Sweden)

Herbert Ernst Wiegand

2011-10-01

Full Text Available

ZUSAMMENFASSUNG: In diesem Beitrag wird die Bildung, Darstellung und Leistung von hybriden textuellen Strukturen, die akzessive Einträge aufweisen, am Beispiel von Wörterbuchartikeln behandelt sowie erklärt, welche Eigenschaften hybride textuelle Einheiten haben. Ein Wörterbuchartikel eines Printwörterbuchs weist immer dann neben einer hierarchischen reinen eine hierarchische hybride Textkonstituentenstruktur auf, wenn in ihm mindestens ein funktionaler Angabezusatz auftritt, z.B. ein oben oder unten erweiternder oder ein binnenerweiternder. Da funktionale Angabezusätze Textsegmente mit Angabefunktion aber ohne Textkonstituentenstatus sind, werden sie durch nichtfunktionale Segmentation ermittelt, so dass neben funktionalen auch nichtfunktionale Textsegmente gegeben sind, die dann bei der Strukturbildung in die Trägermengen eingehen, so dass die Trägermengen aller hybriden hierarchischen Strukturen elementenheterogen, während die Trägermengen aller hierarchischen reinen Strukturen elementenhomogen sind. In den Strukturgraphen für hierarchische hybride Artikelstrukturen sind dann die Knoten für diejenigen Textsegmente, die den Hybridstatus der Strukturen bewirken, entweder durch Pfeilkanten für die textarchitektonischen oberhalb/unterhalb-Relationen mit den Knoten für die Textkonstituenten verbunden, so dass die Strukturgraphen architektonisch angereichert sind, oder durch besonders markierte Kanten, die die Knoten für die nichtfunktionalen Textsegmente und die für die binnenerweiternden funktionalen Angabezusätze mit den Knoten für die Textkonstituenten verbinden. Zu jedem Typ von hierarchischer reiner Artikelstruktur gehören mehrere Typen von hybriden Artikelstrukturen; entsprechendes gilt für hierarchische reine Angabestrukturen. Nur eine Auswahl aus den Typologien der hybriden Artikel- und Angabestrukturen wird behandelt sowie eine kleine Auswahl von hybriden textuellen Einheiten, die kriteriale Eigenschaften von zwei

Technologie Silverlight

OpenAIRE

Kouba, Petr

2011-01-01

Diplomová práce se věnuje popisu technologie Silverlight, možnostem spouštění a vývoje aplikací. Dále je představena spojitost technologie Silverlight s technologií Windows Presentation Foundation a způsob vytváření uživatelských rozhraní v jazyce XAML. K propojení dat získaných nejen z webových služeb s ovládacími prvky uživatelského rozhraní slouží datové vazby. Koncept Windows Communication Foundation umožňuje relativně snadný vývoj aplikací získávajících data z různých zdrojů prostřednict...

High-efficiency, thin-film- and concentrator solar cells from GaAs. Final report; High-efficiency, Duennschicht- und Konzentrator-Solarzellen aus Galliumarsenid. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Wettling, W [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Bett, A W [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Pilkuhn, M [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Scholz, F [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Baldus, A [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Blieske, U [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Blug, A [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Duong, T [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Schetter, C [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Stollwerck, G [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Sulima, O [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Wegener, A [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Doernen, A [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Frankowsky, G [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Haase, D [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Hahn, G [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Hangleiter, A [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Stauss, P [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Tsai, C Y [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Zieger, K [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4

1996-10-01

Main topic of the project was the manufacturing of highly efficient GaAs-solar cells and the fabrication of concentrator cells. During this process significant progress was made with the material preparation, the solar cell technology and the material and process characterisation. This succeeded in the following efficiencies: - GaAs solar cell made by MOVPE technology: 22.9% on 4 cm{sup 2} (AM1.5g) - GaAs solar cell made by LPE-ER process: 22.8% on 4 cm{sup 2} (AM1.5g) - GaAs concentrator solar cell made by LPE-ER process: 24.9% at C=100xAM1.5d - GaAs concentrator module with fresnel lenses: Module efficiency 20.1% (under irradiation of 793 W/m{sup 2}). Another main focus was the epitaxy of GaAs on Si substrate. Two different approaches were investigated. Together with the cooperation partner ASE, Heilbronn a selective growth technology was developed that led to a decreased crack formation. By a simultanous optimization of the other epitaxy and process parameters, the efficiency was increased up to 16.6% AM0 on 1 cm{sup 2} solar cells. Furthermore a hybrid epitaxy was investigated. A GaAs layer was deposited onto a Si substrate using MOVPE. The solar cell structure was grown with a low temperature LPE. Unexpected difficulties appeared with this process, so that fundamental experiments needed to be done with the LPE technology. So far, no solar cells could be manufactured with this method. In addition, work was performed on GaInP solar cells on GaAs substrate. An efficiency of 15.7% (AM0) was acchieved. (orig.) [Deutsch] Gegenstand des Projekts war die Herstellung hocheffizienter GaAs-Solarzellen und die Fertigung von Konzentratorsolarzellen. Dazu wurden wesentliche Fortschritte bei der Materialpraeparation, der Solarzellentechnologie und der Material- and Prozesscharakterisierung erzielt. Diese Erfolge druecken sich in den erzielten Wirkungsgraden aus: - GaAs-Solarzelle hergestellt mit MOVPE-Technologie: 22.9% auf 4 cm{sup 2} (AM1.5g) - GaAs-Solarzelle hergestellt

Visualization of coronary arteries in CT as assessed by a new 16 slice technology and reduced gantry rotation time: first experiences; Darstellung der Herzkranzgefaesse im CT mittels neuer 16-Zeilen-Technologie und reduzierter Rotationszeit: erste Erfahrungen

Energy Technology Data Exchange (ETDEWEB)

Heuschmid, M.; Kuettner, A.; Kopp, A.F.; Claussen, C.D. [Abt. Radiologische Diagnostik, Universitaetsklinikum Tuebingen (Germany); Flohr, T.; Schaller, S.; Hartung, A.; Ohnesorge, B. [Siemens Medical Solutions, Forchheim (Germany); Wildberger, J.E. [Klinik fuer Radiologische Diagnostik, Universitaetsklinikum (RWTH) Aachen (Germany); Lell, M.; Baum, U. [Abt. Innere Medizin IV (Kardiologie), Universitaetsklinikum Tuebingen (Germany); Schroeder, S. [Inst. fuer Diagnostische Radiologie, Universitaetsklinikum Erlangen (Germany)

2002-06-01

Nachuntersuchung einer KHK eine Koronarkalkbestimmung (Ca-Score) sowie eine CT-Angiographie (CTA) der Herzkranzgefaesse mit retrospektivem EKG-Gating und einer Rotationszeit von 420 ms durchgefuehrt. Fuer die CTA wurden 120 ml KM i.v. appliziert. Nach {beta}-Blocker-Gabe war die Herzfrequenz zwischen 55 und 67 Schlaegen/min. Ergebnisse: Die Untersuchungszeiten betrugen 12s beim Ca-Score und 18s bei der CTA (Untersuchungsbereich 15 bzw. 12 cm). Der Volume Score lag zwischen 0 und 256,4. In der CTA konnte der gesamte Koronargefaessbaum einschliesslich der distal gelegenen, subsegmentalen Aeste bei allen Patienten artefaktfrei dargestellt werden. Bei zwei Patienten wurde ein Komplettverschluss der rechten Kranzarterie (RCA) bzw. des Ramus interventricularis anterior (RIVA) diagnostiziert. Letzterer Patient wies ein grosses linksventrikulaeres Vorderwandaneurysma auf. Schlussfolgerungen: Nach unseren bisherigen ersten Erfahrungen scheint die neue 16-Zeilen-Technologie eine sehr gute Darstellung des koronaren Gefaessbaumes mit Abgrenzbarkeit auch kleiner Gefaessaeste bis in die Peripherie aufgrund einer gesteigerten raeumlichen Aufloesung zu ermoeglichen. Die bei diesen Patienten erzielte Bildqualitaet laesst die Hoffnung auf eine verbesserte, nicht-invasive Herzdiagnostik aufkommen. In groesseren Studien muss jedoch diese neue Technologie bezueglich ihres klinischen Stellenwertes bei der Kardiodiagnostik untersucht werden. (orig.)

Hybrid power pack for sustainability and environmental friendliness in driving multiple units; Hybrid-Powerpack fuer nachhaltigen und umweltfreundlichen Triebwagenantrieb

Energy Technology Data Exchange (ETDEWEB)

Lehmann, Ingo; Schmalzing, Claus-Oliver [MTU Friedrichshafen GmbH, Friedrichshafen (Germany); Werner, Claus [DB RegioNetz Verkehrs GmbH (Germany); Bold, Uwe [DB Systemtechnik Engineering, Kassel (Germany)

2011-07-01

With MTU's hybrid drive, it is possible to obtain a saving of up to 25% in fuel consumption and to operate in such a way as to avoid emissions in stations. MTU Friedrichshafen and Deutsche Bahn are testing a parallel hybrid drive on the line between Aschaffenburg und Miltenberg, starting in autumn 2011. This test is intended to produce evidence that this technology is ready for everyday use. (orig.)

Technologie vergt samenwerking : Pleidooi voor een Nationale technologie agenda

NARCIS (Netherlands)

Bronkhorst, A.W.; Taneja, K.

2017-01-01

De ontwikkelingen rond nationale crisisbeheersing gaan niet alleen snel, ze worden ook in toenemende mate informatie- en technologie gedreven. In het magazine is hier de afgelopen jaren veel aandacht aan besteed, met onderwerpen zoals het maken van dreigingsinschattingen, het verzamelen en duiden

Advances in Ceramic Matrix Composite Blade Damping Characteristics for Aerospace Turbomachinery Applications

Science.gov (United States)

Min, James B.; Harris, Donald L.; Ting, J. M.

2011-01-01

For advanced aerospace propulsion systems, development of ceramic matrix composite integrally-bladed turbine disk technology is attractive for a number of reasons. The high strength-to-weight ratio of ceramic composites helps to reduce engine weight and the one-piece construction of a blisk will result in fewer parts count, which should translate into reduced operational costs. One shortcoming with blisk construction, however, is that blisks may be prone to high cycle fatigue due to their structural response to high vibration environments. Use of ceramic composites is expected to provide some internal damping to reduce the vibratory stresses encountered due to unsteady flow loads through the bladed turbine regions. A goal of our research was to characterize the vibration viscous damping behavior of C/SiC composites. The vibration damping properties were measured and calculated. Damping appeared to decrease with an increase in the natural frequency. While the critical damping amount of approximately 2% is required for typical aerospace turbomachinery engines, the C/SiC damping at high frequencies was less than 0.2% from our study. The advanced high-performance aerospace propulsion systems almost certainly will require even more damping than what current vehicles require. A purpose of this paper is to review some work on C/SiC vibration damping by the authors for the NASA CMC turbine blisk development program and address an importance of the further investigation of the blade vibration damping characteristics on candidate CMC materials for the NASA s advanced aerospace turbomachinery engine systems.

Synthèse: Revue des Sciences et de la Technologie - Vol 24 (2015)

African Journals Online (AJOL)

Synthèse: Revue des Sciences et de la Technologie - Vol 24 (2015) ... hygrothermique en eau douce sur un composite unidirectionnel verre-époxy · EMAIL ... Problèmes de type obstacle : algorithmes de résolution · EMAIL FREE FULL TEXT ...

Development and optimization of processes for producing highly efficient large-area PV modules based on amorphous silicon. Final report; Entwicklung und Optimierung von Prozessen zur Fertigung hocheffizienter grossflaechiger a-Si-PV-Module. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Maurus, H.; Ruebel, H.; Frammelsberger, W.; Geyer, R.; Lechner, P.; Psyk, W.; Schade, H.

2001-07-31

This report contains fundamental topics on further developing the PV technology based on amorphous silicon (a-Si), namely upscaling of laboratory processes to production size areas, improvement of patterning processes to minimize area losses due to monolithic series connection of cells, speeding up individual process steps while maintaining their reproducibility, long-term stability of encapsulated modules. Among the superstrate technologies of the competitors, the module efficiency has reached an international standard. The throughput of the pilot production line has been substantially increased by improving the process cycle times and the equipment uptime. (orig.) [German] Der vorliegende Bericht beinhaltet grundlegende Arbeiten zur Weiterentwicklung der a-Si PV-Technologie. Er behandelt die Themen: Aufskalierung von kleinflaechiger Laborabscheidetechnologie auf groessere industrierelevante Flaechen, Verbesserung und Optimierung von Strukturierungsverfahren fuer hohe Flaechenausnutzung, Beschleunigung und Reproduzierbarkeit der Einzelprozesse sowie Langzeitstabilitaet von verkapselten Modulen. Der Modulwirkungsgrad hat - verglichen mit gleichartiger Technologie von Wettbewerbern - internationalen Standard erreicht. Der Durchsatz der Pilotfertigungsanlage konnte aufgrund der Verbesserung der wirtschaftlichen Kenngroessen Anlagenverfuegbarkeit und Taktzeit wesentlich erhoeht werden. (orig.)

Eine Technologie für das durchgängige und automatisierte Testen eingebetteter Software

OpenAIRE

Fischer, Till

2016-01-01

Eingebettete Systeme unterliegen Anforderungen, die den Test der Software erforderlich machen. Zur Automatisierung werden dabei verschiedene Technologien eingesetzt: Für den Test nah am Quelltext sind spezielle Unit-Test Werkzeuge erforderlich, der Test von Steuer- und Regelfunktionen erfordert Model-, Software- und Hardware-in-the-Loop Werkzeuge. In dieser Arbeit wird deren Integrierbarkeit untersucht. Der Fokus liegt auf einer neuen Programmiersprache zur Implementierung von Testfällen.

Eine Technologie für das durchgängige und automatisierte Testen eingebetteter Software

OpenAIRE

Fischer, Till

2017-01-01

Eingebettete Systeme unterliegen Anforderungen, die den Test der Software erforderlich machen. Zur Automatisierung werden dabei verschiedene Technologien eingesetzt: Für den Test nah am Quelltext sind spezielle Unit-Test Werkzeuge erforderlich, der Test von Steuer- und Regelfunktionen erfordert Model-, Software- und Hardware-in-the-Loop Werkzeuge. In dieser Arbeit wird deren Integrierbarkeit untersucht. Der Fokus liegt auf einer neuen Programmiersprache zur Implementierung von Testfällen.

Aircraft Research Guideline 1999 - 2002: High pressure compressor - preliminary design as a basis for the development of an efficient and environmentally friendly core engine. Final report; Leitlinie Luftfahrtforschung 1999 - 2002: Hochdruckverdichter-Vorauslegung als Grundlagenuntersuchung zur Entwicklung eines Kerntriebwerkes fuer einen effizienten und umweltfreundlichen Antrieb. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Klinger, H.

2001-08-01

konstruktiven Seite stand die Entwicklung eines kostenguenstigen und gewichtsoptimierten Rotors in Blisk-Bauweise im Vordergrund. In einem weiteren Schwerpunkt wurde der Einsatz eines durchgehend geteilten Verdichtergehaeuses untersucht. Darueber hinaus konnten auch konzeptionell neue Auslegungsvarianten fuer einen sogenannten Vortex Reducer und konstruktive Loesungsvorschlaege fuer Blisk Beschaufelung erarbeitet werden. Die im Rahmen des Vorhabens gewonnenen Erkenntisse werden unmittelbar in die Auslegung zukuenftiger Hochdruckverdichter fuer Zwei-Wellen-Triebwerke einfliessen. (orig.)

Editorial zum Tagungsband: Spannungsfelder und blinde Flecken. Medienpädagogik zwischen Emanzipationsanspruch und Diskursvermeidung

Directory of Open Access Journals (Sweden)

Sven Kommer

2017-10-01

und Selbstermächtigung orientierte Linie, die sich in ausserschulischen Settings subjekt- und ressourcenorientiert die Medien als Instrumente subversiver Strategien und/oder der Identitätskonstruktion angeeignet hat. Oft nur bedingt an diese anschlussfähig ist eine schulpädagogische Linie, die ihren Ausgang bei der ‹Film- und Medienerziehung› genommen hat und inzwischen stärker auf Kompetenzerwerb fokussiert. Daneben findet sich dann noch eine (vielfältig ausdifferenzierte ‹Mediendidaktik›, die immer wieder technologie-euphorisch innovatives Lernen versprochen hat. Positiv gewendet, zeigt bereits diese kleine Skizze, dass die Medienpädagogik als erziehungswissenschaftliche Disziplin darauf verweisen kann, wie intensiv Theoriebildung, Forschung und Praxis gegenwärtig in einem breiten Spektrum von Ansätzen, Forschungsschwerpunkten und ‹Schulen› vollzogen wird. Das Fach ist also sehr lebendig – erscheint aber aus der Perspektive externer Beobachter möglicherweise auch als diffus.

Control and design of volumetric composition in pultruded hybrid fibre composites

DEFF Research Database (Denmark)

Madsen, Bo; Hashemi, Fariborz; Tahir, Paridah

2016-01-01

composition (i.e. volume fractions of fibres, matrix and porosity) in hybrid fibre composites. The model is based on a constant local fibre volume fraction criterion. Good agreement is found between model predictions and experimental data of pultruded hybrid kenaf/glass fibre composites with variable hybrid...... fibre weight mixing ratios. To demonstrate the suitability of the model, simulations are performed for four different cases of volumetric composition in hybrid kenaf/glass composites....

Acceptance of governmental communication in catastrophes and media coverage; Akzeptanz staatlicher Kommunikation in Katastrophen und Medienberichterstattung

Energy Technology Data Exchange (ETDEWEB)

Ruhrmann, G.; Kohring, M. [Technische Univ. Ilmenau (Germany). Inst. fuer Medien- und Kommunikationswissenschaft

1997-12-31

Technology policy - like every political field - has to deal with conflicts, in which different partial interests are negotiated. Technological catastrophes are based on past decisions in technology policy. From there specific problems of acceptance in catastrophes can only be understood according to this social and temporal context. Acceptance deficits of the government result from the insufficient consideration of the interests non-governmental actors express(ed) with regard to technological risk decisions. Therefore governmental risk and crisis communication should communicate the rationales underlying technology decisions, at the same time giving other actors the possibility of further negotiation. The media coverage plays an important role in this communication process. Following their own specific rules the media create a public sphere, in order to give different groups and institutions an orientation for their social acting. Governmental communication should not consider journalism as a transmission belt for its information policy - rather, in order to be effective, it should respect the specific journalistic conduct. (orig.) [Deutsch] Technologiepolitik ist - wie jedes andere Politikfeld auch - Konfliktpolitik, in der unterschiedliche Teilinteressen ausgehandelt werden. Da technologische Katastrophen aus vorangegangenen Technologie-Entscheidungen resultieren, kann ihre spezifische Akzeptanzproblematik auch nur vor diesem sozialen und zeitlichen Hintergrund nachvollzogen werden. Akzeptanzdefizite des Staates haben ihren Ursprung in der mangelnden Beruecksichtigung nicht-staatlicher Akteure bei riskanten technologiepolitischen Entscheidungen. Staatliche Risiko- und Krisenkommunikation sollte daher die Praemissen, die in Technologie-Entscheidungen eingehen, mitkommunizieren und zur Disposition stellen. In diesem Kommunikationsprozess spielt die Medienberichterstattung eine bedeutsame Rolle. Sie stellt, und zwar nach eigenen spezifischen Beobachtungskriterien

The Democratic Impact of ICT in Africa Informations- und Kommunikationstechnologien, politische Handlungsfähigkeit und demokratisches Regieren in Afrika

Directory of Open Access Journals (Sweden)

Alexandra Dobra

2012-01-01

Full Text Available This paper takes a critical look at the view that the Internet can serve as a laboratory of political experimentation for reconfiguring the repertories of political actions. The overall discourses on information and communications technology (ICT are too often focused on technology and infrastructure, when the question of its use should be central. In order to comprehend how ICT can serve as a democratic enhancer, this paper critically examines the African anthropology of the state and of the public sphere. It captures the African endogenous productions of political modernity and the subsequent way ICT is appropriated and indigenized by African local instances. African states and civil societies do not fit into prescriptive Western paradigms. In order to encourage the effective use of new technologies, this paper has developed the so-called “African model of ICT practice”, which proposes a set of hypotheses that aim to enable the effective usage and integration of ICT within the democratic process in the context of an African self-defined political reality.Dieser Beitrag unterzieht die Vorstellung, das Internet könne als Labor für politische Experimente dienen, um neue politische Aktionsmöglichkeiten auszuloten, einer kritischen Prüfung. Nach Ansicht der Autorin sind die übergreifenden Diskurse zu Informations- und Kommunikationstechnologien (IKT allzu oft nur auf Fragen der Technologie und Infrastruktur konzentriert, während die Frage nach ihrer Anwendung im Zentrum stehen sollte. Um zu erhellen, inwieweit IKT demokratiefördernd wirken können, verweist sie auf die historische Konstituierung von Staat und Öffentlichkeit in Afrika, die endogene Herausbildung politischer Modernität und die entsprechenden Formen lokaler Aneignung und Anpassung von IKT. Staat und Zivilgesellschaft in den Ländern Afrikas entsprechen nicht den vorgegebenen westlichen Modellen. Die Autorin entwickelt ein “African model of ICT practice“ und legt

Untersuchungen an a-C:H:Me beschichteten Substraten zur Eignung als alternatives Bipolarplattenmaterial für wässrige Vanadium Redox-Flow Batterien

OpenAIRE

Richards, Justin

2015-01-01

Für den Auf- und Ausbau der erneuerbaren Energien sind zentrale und dezentrale Zwischenspeicherlösungen unabdingbar. Eine potentielle Technologie ist die All-Vanadium Redox-Flow Batterie. Ein essentieller Schritt für den kommerziellen Durchbruch dieser Batterie-Technologie vom Prototypenstatus zur Serienfertigung ist die Entwicklung eines kostengünstigen, elektrisch hochleitfähigen und elektrochemisch stabilen beschichteten metallischen Materials für die inneren Stromableiter (Bipolarplatten)...

Hybrid composites

CSIR Research Space (South Africa)

Jacob John, Maya

2009-04-01

Full Text Available mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites was investigated by Kalaprasad et al [25].Chemical surface modifications such as alkali, acetic anhydride, stearic acid, permanganate, maleic anhydride, silane...

Shale gas boom in the US. Technology - economy - environmental effects; Schiefergas-Boom in den USA. Technologie - Wirtschaftlichkeit - Umwelteffekte

Energy Technology Data Exchange (ETDEWEB)

Meyer-Renschhausen, Martin; Klippel, Philipp

2017-09-01

Lieferungen der OPEC und Russlands zu verringern. Die Kritiker betonen dagegen die mit dem Fracking verbundenen Umweltrisiken und sehen in der Ausweitung der fossilen Energiebasis ein Hemmnis fuer den klimapolitisch erforderlichen Uebergang zu erneuerbaren Energien. Der deutsche Gesetzgeber betont die mit dem Fracking verbundenen Umweltrisiken und hat mit dem Fracking-Gesetzespaket vom 24. Juni 2016 das Fracking faktisch verboten. International werden die Vor- und Nachteile des Frackings allerdings sehr unterschiedlich bewertet, so dass mit einem weiteren Ausbau der unkonventionellen Oel- und Gasfoerderung zu rechnen ist. Derzeit konzentriert sich das Fracking fast ausschliesslich auf die USA. Zahllose Studien untersuchen die Potentiale, die Wirtschaftlichkeit der verschiedenen Gewinnungsverfahren sowie die Umwelteffekte. Die amerikanische Schiefergasfoerderung bietet daher ein hervorragendes Anschauungsobjekt, um die Technologie, ihre Wirtschaftlichkeit und ihre Folgen abzuschaetzen. Das vorliegende Buch wertet die aktuellen Studien und Daten aus und leistet einen Beitrag zur Einschaetzung der laengerfristigen energiewirtschaftlichen und klimapolitischen Bedeutung der Schiefergasgewinnung im internationalen Rahmen.

Compositional Modelling of Stochastic Hybrid Systems

NARCIS (Netherlands)

Strubbe, S.N.

2005-01-01

In this thesis we present a modelling framework for compositional modelling of stochastic hybrid systems. Hybrid systems consist of a combination of continuous and discrete dynamics. The state space of a hybrid system is hybrid in the sense that it consists of a continuous component and a discrete

Resin infusion of layered metal/composite hybrid and resulting metal/composite hybrid laminate

Science.gov (United States)

Cano, Roberto J. (Inventor); Grimsley, Brian W. (Inventor); Weiser, Erik S. (Inventor); Jensen, Brian J. (Inventor)

2009-01-01

A method of fabricating a metal/composite hybrid laminate is provided. One or more layered arrangements are stacked on a solid base to form a layered structure. Each layered arrangement is defined by a fibrous material and a perforated metal sheet. A resin in its liquid state is introduced along a portion of the layered structure while a differential pressure is applied across the laminate structure until the resin permeates the fibrous material of each layered arrangement and fills perforations in each perforated metal sheet. The resin is cured thereby yielding a metal/composite hybrid laminate.

What is Educational Technology? An Inquiry into the Meaning, Use, and Reciprocity of Technology / Qu’est-ce que la technologie pédagogique ? Un examen de la signification, de l’utilisation et de la réciprocité de la technologie

Directory of Open Access Journals (Sweden)

Arun Lakhana

2014-08-01

Full Text Available This position paper explores the ambiguity of technology, toward refined understanding of Educational Technology. The purpose of education is described by John Dewey as growing, or habitual learning. Two philosophical conceptions of technology are reviewed. Dewey positions inquiry as a technology that creates knowledge. Val Dusek offers a “consensus definition,” a systems approach to technology that merges into social construction theory and actor-network theory, both of which emphasize complex relations between humans and technology. Using Dewey and Dusek as reference, literature related to Educational Technology is reviewed. A history of its definitions and conceptions of hard (material technology and of soft (process technology are examined. Three brief case studies reveal a bias toward hard technology in contemporary discourse. A misconception that soft technology begins with pre-authenticated knowledge is identified and shown to obscure the reciprocity between technology and the intellect. Cet exposé de position se penche sur l’ambiguïté de la technologie en vue de raffiner la compréhension de la technologie pédagogique. L’objectif de l’éducation est décrit par John Dewey comme étant un apprentissage croissant ou habituel. Deux conceptions philosophiques de la technologie sont examinées. Dewey considère l’enquête comme une technologie qui crée le savoir. Val Dusek offre une « définition consensuelle », une approche systémique de la technologie qui rejoint la théorie de la construction sociale et la théorie de l’acteur-réseau, qui mettent toutes deux l’accent sur les relations complexes entre les humains et la technologie. Utilisant Dewey et Dusek comme référence, la documentation portant sur la technologie pédagogique est examinée. L’historique des définitions et conceptions de la technologie « dure » (matérielle et de la technologie « douce » (processus est examiné. Trois courtes études de

Technologie RFID

OpenAIRE

Černý, Tomáš

2007-01-01

Práce poskytuje přehled o problematice RFID technologií. Analyzuje historický vývoj RFID technologií, popisuje základní komponenty RFID systémů, normy spojené s RFID, bezpečnost RFID a trh RFID technologií. Dále se práce věnuje možnostem využití RFID technologií v různých oborech, zařazení RFID systémů do rámce podnikové informatiky a hodnotí efekty, které RFID technologie přináší. Práce také definuje doporučený postup pro zavádění RFID technologií do firmy....

Analysis of composition and microstructural uniformity of hybrid glass/carbon fibre composites

Energy Technology Data Exchange (ETDEWEB)

Beauson, J.; Markussen, C.M.; Madsen, Bo

2013-09-01

In hybrid fibre composites, the intermixing of the two types of fibres imposes challenges to obtain materials with a well-defined and uniform microstructure. In the present paper, the composition and the microstructural uniformity of hybrid glass/carbon fibre composites mixed at the fibre bundle level are investigated. The different levels of compositions in the composites are defined and experimentally determined. The composite volume fractions are determined using an image analysis based procedure. The global fibre volume fractions are determined using a gravimetrical based method. The local fibre volume fractions are determined using volumetric calculations. A model is presented to predict the interrelation of volume fractions in hybrid fibre composites. The microstructural uniformity of the composites is analysed by the determined variation in composite volume fractions. Two analytical methods, a standard deviation based method and a fast Fourier transform method, are used to quantify the difference in microstructural uniformity between composites, and to detect and quantify any repeating pattern in the composite microstructure. (Author)

Characterization of Polylactic Acid/ Microcrystalline Cellulose/ Montmorillonite Hybrid Composites

International Nuclear Information System (INIS)

Reza Arjmandi; Azman Hassan; Haafiz, M.K.M.; Zainoha Zakaria; Inuwa, I.M.

2014-01-01

The objective of this study is to investigate the effect of montmorillonite (MMT)/ microcrystalline cellulose (MCC) hybrid fillers on mechanical properties and morphological characteristics of polylactic acid (PLA) composites. PLA/ MMT nano composites and PLA/ MMT/ MCC hybrid composites were prepared by solution casting method. Morphology and tensile properties of PLA composites were investigated using Field emission scanning electron microscopy and Instron tensile testing machine. The maximum tensile strength of PLA/ MMT nano composites was obtained with 5 phr contents of MMT, which corresponding to 30.75 MPa. Based on optimized formulation of PLA/ MMT nano composites (5 phr MMT contents), various amounts of MCC (0 to 7 phr) were added into optimum formulation of PLA/ MMT in order to produce PLA/ MMT/ MCC hybrid composites. Fourier transform infrared spectroscopy revealed some level of interaction between PLA and both MMT and MCC in the hybrid composites. However, the percent elongation at break of the hybrid composites was generally higher than PLA/ MMT nano composites. Additionally, Young's modulus of the PLA/ MMT/ MCC hybrid composites increased gradually with increasing of MCC contents and was higher than PLA/ MMT at all compositions. The present results are the first among a series of experiments that have been designed in order to probe the effect of MMT and MCC in the PLA. (author)

Mineralogical and chemical-physical effects of hydrocarbon permeation in composite liners and cut-off walls. Final report; Mineralogische und chemisch-physikalische Auswirkungen der Permeation von Kohlenwasserstoffen in Kombinationsdichtungen und -dichtwaenden. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Kalbe, U; Berger, W; Mueller, W; Brune, M; Eckardt, J; Tatzky-Gerth, R; Ache, W; Goebbels, J [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany); Breu, J; Kerzdoerfer, H [Regensburg Univ. (Germany). Inst. fuer Anorganische Chemie

2000-05-31

Composite liner systems (HDPE geomembrane and compacted mineral liner) are used in Germany in landfills and for the lining of contaminated sites according to the technical regulations. It is expected that these lining systems provide a highly efficient and reliable technical barrier for the long-term groundwater protection. To support these expectations and assess the performance of the liner system even under extreme conditions, various composite liner systems were exposed to a mixture of 9 liquid hydrocarbons and their permeation behaviour was studied in permeation cells over 12 years. The cells were now dismantled and changes in the liner materials were carefully measured and controlled. The following issues were pursued in the research project: - effect of long-term hydrocarbon permeation and immersion on the properties of the geomembrane, - determination of the vertical distribution of organic contaminants in the mineral liner, - changes in the mineralogical, micromorphological and soil mechanical properties of the mineral liner brought about by the contaminant mixture, - investigation of the influence of microbial activity on the mineral layer, - modelling of the pollutant transport in the composite liner system. Neither geomembrane nor most of the tested mineral liners exhibited significant changes. Hydrocarbon permeation was proved to have been substantially suppressed by the composite liner. (orig.) [German] Zur Sicherung von Deponien und Altlasten mit dem Ziel eines langfristig wirksamen Grundwasserschutzes werden seit Mitte der 80er Jahre Kombinationsdichtungen (Verbund aus Kunststoffdichtungsbahn und mineralischer Dichtschichten) eingesetzt. Um deren Langzeitbestaendigkeit auch unter extremen Bedingungen bewerten zu koennen, wurden Permeationsmesszellen, welche die Verhaeltnisse in der Deponie nachstellen und ueber einen Zeitraum von 12 Jahren mit einem Mehrkomponentengemisch konzentrierter organischer Verbindungen beaufschlagt worden waren, zerlegt und

Carboxylated nitrile butadiene rubber/hybrid filler composites

Directory of Open Access Journals (Sweden)

Ahmad Mousa

2012-08-01

Full Text Available The surface properties of the OSW and NLS are measured with the dynamic contact-angle technique. The x-ray photoelectron spectroscopy (XPS of the OSW reveals that the OSW possesses various reactive functional groups namely hydroxyl groups (OH. Hybrid filler from NLS and OSW were incorporated into carboxylated nitrile rubber (XNBR to produce XNBR hybrid composites. The reaction of OH groups from the OSW with COOH of the XNBR is checked by attenuated total reflectance spectra (ATR-IR of the composites. The degree of curing ΔM (maximum torque-minimum torque as a function of hybrid filler as derived from moving die rheometer (MDR is reported. The stress-strain behavior of the hybrid composites as well as the dynamic mechanical thermal analysis (DMTA is studied. Bonding quality and dispersion of the hybrid filler with and in XNBR are examined using scanning-transmission electron microscopy (STEM in SEM.

Relative biocompatibility of micro-hybrid and nano-hybrid light-activated composite resins.

Science.gov (United States)

Olabisi Arigbede, Abiodun; Folasade Adeyemi, Bukola; Femi-Akinlosotu, Omowumi

2017-01-01

Background. In vitro studies have revealed a direct association between resin content and cytotoxicity of composite resins; however, implantation studies in this regard are sparse. This study investigates the relationship between filler content of composite resins and biocompatibility. Methods. This research employed twelve 180‒200-gr male Wistar rats, 1 nano-hybrid (Prime-Dent Inc.) and 1 micro-hybrid (Medental Inc.) composite resins containing 74% and 80‒90% filler content, respectively. The samples were assessed on the 2nd, 14th and 90th day of implantation. Four rats were allocated to each day in this experimental study. A section of 1.5mm long cured nano-hybrid and micro-hybrid materials were implanted into the right and left upper and lower limbs of the rats, respectively. Eight samples were generated on each day of observation. Inflammation was graded according to the criteria suggested by Orstavik and Major. Pearson's chi-squared test was employed to determine the relationship between the tissue responses of the two materials. Statistical significance was set at P resin had a score of 3.0 for cellular inflammation. On the 14th day, the micro-hybrid resin also exhibited a lower average grade for cellular inflammation. On the 90th day, the micro-hybrid resin had a higher grade of inflammation (0.9) compared to 0.3 recorded for nano-hybrid. The composite resins with higher filler content elicited a significantly lower grade of inflammation irrespective of the duration (χ=20.000, df=8, P=0.010) while the composite resins with lower filler content elicited a significantly lower inflammatory response on the 90th day (χ=4.000, df=1, P=0.046). Conclusion. The composite resins with higher filler content generally elicited significantly lower grades of inflammation, and the composite resins with lower filler content exhibited significantly lower inflammatory response on the 90th day of implantation.

Development of integrated superconducting devices for signal preprocessing. Final report; Entwicklung supraleitender Bausteine der Signalvorverarbeitung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Biehl, M.; Koch, R.; Neuhaus, M.; Scherer, T.; Jutzi, W.

1998-02-01

bewaehrten Niob-Technologie wurde ein 12 bit SFQ-Schieberegister mit einer Schreib- und Leseschaltung und mit extrem kleiner Verlustleistung von 9 nW/bit/GHz hergestellt und impulsmaessig vermessen. Nach dem gleichen Prinzip wurde ein Zufallsimpulsgenerator ausgelegt. Die Simulation von RSFQ-Toggle-Flipflops mit einer grossen Zahl von Eingangsimpulsen zeigte, dass dynamische Effekte besonders durch Streuinduktivitaeten den digitalen Zaehlerbetrieb auf Taktfrequenzen unter 100 GHz begrenzen koennen, obwohl Gleichspannungsmessungen einen einwandfreien Betrieb bei hoeheren Frequenzen erwarten lassen. Daher sind Echtzeitmessungen der einzelnen SFQ-Impulse eines Wortes notwendig. Echtzeitmessungen mit einem Abtastoszillographen an einem 4-stufigen RSFQ-Zaehler der Niob-Technologie mit entsprechend breitbandiger Leitungszufuehrung ergaben bis zur Grenzfrequenz eines vorhandenen 32 bit Wortgenerators bei 2 GHz Bitfehlerraten um 10{sup -12}. Mit der YBCO-Technologie wurden ein 4 bit SFQ-Schieberegister fuer 40 K und miniaturisierte koplanare Mikrowellenschaltungen fuer die Satelliten- und Kommunikationstechnik um 10 GHz fuer 77 K ausgelegt und implementiert. Ein 4 bit Echtzeitfrequenzmesser und ein Filter mit einer 3 dB-Bandbreite von nur 1,8% wurden im IEGI erfolgreich auf dem Kaltkopf eines AEG-Kleinkuehlers ausgemessen. Hybride Schaltungen, z.B. Verstaerker und Oszillatoren, mit aktiven Halbleiterbauelementen und koplanaren YBCO-Verbindungen mit geringen Verlusten koennen bei 77 KJ interessante Eigenschaften besitzen. (orig.)

Boron/aluminum graphite/resin advanced fiber composite hybrids

Science.gov (United States)

Chamis, C. C.; Lark, R. F.; Sullivan, T. L.

1975-01-01

Fabrication feasibility and potential of an adhesively bonded metal and resin matrix fiber-composite hybrid are determined as an advanced material for aerospace and other structural applications. The results show that using this hybrid concept makes possible a composite design which, when compared with nonhybrid composites, has greater transverse strength, transverse stiffness, and impact resistance with only a small penalty on density and longitudinal properties. The results also show that laminate theory is suitable for predicting the structural response of such hybrids. The sequence of fracture modes indicates that these types of hybrids can be readily designed to meet fail-safe requirements.

Optimal Design for Hybrid Ratio of Carbon/Basalt Hybrid Fiber Reinforced Resin Matrix Composites

Directory of Open Access Journals (Sweden)

XU Hong

2017-08-01

Full Text Available The optimum hybrid ratio range of carbon/basalt hybrid fiber reinforced resin composites was studied. Hybrid fiber composites with nine different hybrid ratios were prepared before tensile test.According to the structural features of plain weave, the unit cell's performance parameters were calculated. Finite element model was established by using SHELL181 in ANSYS. The simulated values of the sample stiffness in the model were approximately similar to the experimental ones. The stress nephogram shows that there is a critical hybrid ratio which divides the failure mechanism of HFRP into single failure state and multiple failure state. The tensile modulus, strength and limit tensile strain of HFRP with 45% resin are simulated by finite element method. The result shows that the tensile modulus of HFRP with 60% hybrid ratio increases by 93.4% compared with basalt fiber composites (BFRP, and the limit tensile strain increases by 11.3% compared with carbon fiber composites(CFRP.

Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites

Energy Technology Data Exchange (ETDEWEB)

Jawaid, M. [School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Abdul Khalil, H.P.S., E-mail: akhalilhps@gmail.com [School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Abu Bakar, A. [School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2011-06-15

Highlights: {yields} Woven hybrid composites show good tensile and flexural properties. {yields} Hybridization with 20% woven jute gives rise to sufficient modulus to composites. {yields} Layering pattern affect mechanical properties of hybrid composites. {yields} Statistical analysis shows that there is significant difference between composites. - Abstract: In this research, tensile and flexural performance of tri layer oil palm empty fruit bunches (EFB)/woven jute (Jw) fibre reinforced epoxy hybrid composites subjected to layering pattern has been experimentally investigated. Sandwich composites were fabricated by hand lay-up technique in a mould and cured with 105 deg. C temperatures for 1 h by using hot press. Pure EFB and woven jute composites were also fabricate for comparison purpose. Results showed that tensile and flexural properties of pure EFB composite can be improved by hybridization with woven jute fibre as extreme woven jute fibre mat. It was found that tensile and flexural properties of hybrid composite is higher than that of EFB composite but less than woven jute composite. Statistical analysis of composites done by ANOVA-one way, it showed significant differences between the results obtained. The fracture surface morphology of the tensile samples of the hybrid composites was performed by using scanning electron microscopy.

Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites

International Nuclear Information System (INIS)

Jawaid, M.; Abdul Khalil, H.P.S.; Abu Bakar, A.

2011-01-01

Highlights: → Woven hybrid composites show good tensile and flexural properties. → Hybridization with 20% woven jute gives rise to sufficient modulus to composites. → Layering pattern affect mechanical properties of hybrid composites. → Statistical analysis shows that there is significant difference between composites. - Abstract: In this research, tensile and flexural performance of tri layer oil palm empty fruit bunches (EFB)/woven jute (Jw) fibre reinforced epoxy hybrid composites subjected to layering pattern has been experimentally investigated. Sandwich composites were fabricated by hand lay-up technique in a mould and cured with 105 deg. C temperatures for 1 h by using hot press. Pure EFB and woven jute composites were also fabricate for comparison purpose. Results showed that tensile and flexural properties of pure EFB composite can be improved by hybridization with woven jute fibre as extreme woven jute fibre mat. It was found that tensile and flexural properties of hybrid composite is higher than that of EFB composite but less than woven jute composite. Statistical analysis of composites done by ANOVA-one way, it showed significant differences between the results obtained. The fracture surface morphology of the tensile samples of the hybrid composites was performed by using scanning electron microscopy.

Composite materials with ionic conductivity: from inorganic composites to hybrid membranes

Energy Technology Data Exchange (ETDEWEB)

Yaroslavtsev, Andrei B [N.S. Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow (Russian Federation)

2009-11-30

Information on composite materials with ionic conductivity including inorganic composites and hybrid polymeric ion exchange membranes containing inorganic or polymeric nanoparticles is generalized. The nature of the effect of increase in the ionic conductivity in this type of materials and the key approaches used for theoretical estimation of the conductivity are considered. Data on the ionic conductivity and some other important properties of composites and membrane materials are presented. Prospects for utilization of composite materials and hybrid membranes in hydrogen power engineering are briefly outlined.

De strijd tegen eenzaamheid. Technologie als wondermiddel?

NARCIS (Netherlands)

MD E.J.M. Wouters; Dr. Sil Aarts

2016-01-01

De kranten stonden er de afgelopen jaren vol van. Krantenkoppen zoals “Meer ouderen digitaal; toename van tablet-en smartphonegebruik” (plusonline, 15 december 2014) en “Opa en Oma aan de Whatsapp” (telegraaf.nl, 3 oktober 2015). Maar welke rol kan technologie nu ECHT spelen in de strijd tegen

Cleaning of process and excess water from organic waste fermentation with a combination of biological treatment stage and microfiltration; Reinigung von Prozess- und Ueberschusswaessern aus der Bioabfallvergaerung durch Kombination aus biologischer Stufe und Mikrofiltration

Energy Technology Data Exchange (ETDEWEB)

Buer, T.; Schumacher, J. [Technische Hochschule Aachen (Germany). Lehrstuhl und Inst. fuer Siedlungswasserwirtschaft

1999-07-01

Within the framework of an R and D project sponsored by the Deutsche Bundesstiftung Umwelt, cleaning of process and excess water from organic waste fermentation plants was studied at the Institute for Siedlungswasserwirtschaft of Aachen Technical University RWTH. The focus in studying these waste waters was on the adaptation and optimization of the ZenoGem {sup trademark} process - a biological cleaning technique with an integrated microfiltration membrane. The use of this technology had the following objectives: to safeguard compliance with the limiting values for direct or indirect discharge of excess water and to reduce the heavy metal freight of circulating process water reentering the fermentation process for mashing raw organic waste. Thus the pollutant content of the fermentation residue was to be cut down. (orig.) [German] Im Rahmen eines von der Deutschen Bundesstiftung Umwelt gefoerderten Forschungs- und Entwicklungsvorhabens wurde am Institut fuer Siedlungswasserwirtschaft der RWTH Aachen die Prozess- und Ueberschusswasserreinigung von Bioabfallvergaerungsanlagen untersucht. Dabei stellte die Adaption und Optimierung des ZenoGem {sup trademark} -Verfahrens - ein biologisches Reinigungsverfahren mit integrierter Mikrofiltrationsmembran - fuer diese Abwaesser den Untersuchungsschwerpunkt dar. Ziel war es, mit dieser Technologie zum einen die Grenzwerte fuer eine direkte oder indirekte Einleitung des Ueberschusswassers zu gewaehrleisten und zum anderen die zirkulierenden Prozesswaesser, die in den Vergaerungsprozess zum Anmaischen der Roh-Bioabfaelle zurueckgefuehrt werden, an Schwermetallen zu entfrachten. Hierdurch sollte eine Schadstoffreduktion im Gaerreststoff erzielt werden. (orig.)

Moderne Groupware-Umgebung am KIT: Microsoft SharePoint 2013

OpenAIRE

Grindler, Sabine; Wörl, Ronny

2014-01-01

Anwender aus den Bereichen Verwaltung, Forschung und Lehre am Karlsruher Institut für Technologie nutzen Microsoft SharePoint Teamseiten als zentrale Groupware-Plattform. Seit letztem Jahr ist die aktuelle Version SharePoint 2013 im Einsatz. Ein Mehrwert der neuen Plattform ist die Office Web Apps Technologie, die eine gemeinsame Bearbeitung von Office-Dokumenten im Web-Browser ermöglicht. Die einfache Zusammenarbeit mit internen und externen Partnern erhöht ebenfalls die Akzeptanz für die Ve...

Use of hydrogeothermal resources - energy and environmental analysis; Nutzung hydrothermaler Erdwaermevorkommen - Energie und Umweltanalyse

Energy Technology Data Exchange (ETDEWEB)

Kayser, M; Kaltschmitt, M [Stuttgart Univ. (Germany). Inst. fuer Energiewirtschaft und Rationelle Energieanwendung (IER)

1997-12-01

The usage of hydrothermal resources for providing low caloric heat is a promissing option for the reduction of energy related environmental effects. This is especially true due the fact that this technology is currently available from the technical point of view. With this background the aim of this paper is to analyze the changes of some key environmental figures fro an existing hydrothermal heating plant in comparison to a fossil fired heating plant. The full life-cycle, from the erection to disposal of these plants are taken into consideration. Based upon the results discussed some conclusions are drawn concerning the contribution of a heat production from hydrothermal resources for realizing an environmental and climatic more sound energy supply system in Germany. (orig.) [Deutsch] Die Nutzung hydrothermaler Erdwaermevorkommen zur Bereitstellung von Niedertemperaturwaerme wird als eine vielversprechende Moeglichkeit zur Reduktion der energiebedingten Umweltauswirkungen angesehen, zumal diese Option zwischenzeitlich technisch weitgehend betriebssicher verfuegbar ist. Vor diesem Hintergrund wird im folgenden exemplarisch an einer existierenden geothermischen Heizzentrale die Umweltentlastung im Vergleich zu einer Waermebereitstellung aus leichtem Heizoel und Erdgas unter Beruecksichtigung der Anlagenerrichtung und -entsorgung quantifiziert. Ausgehend davon werden Aussagen gemacht, inwieweit diese Technologie einen Beitrag zu einer umweltfreundlicheren und klimavertraeglicheren Energieversorgung in Deutschland leisten kann. (orig.)

Post-Impact and Open Hole Tensile Of Kenaf Hybrid Composites

Science.gov (United States)

Yunus, S.; Salleh, Z.; Masdek, N. R. N. M.; Taib, Y. M.; Azhar, I. I. S.; Hyie, K. M.

2018-03-01

Nowadays, kenaf hybrid glass composites has been used for a vast field of study throughout the globe. There are several compositions and orientation of kenaf hybrid glass composites that has been studied. With regards to the study that has been done, this study will be focussing on a 90FG/0/90/90/0/90FG orientation of kenaf hybrid glass composites. Polyester resin is used as a matrix to these hybrid composites. Impacted and open hole specimens were then analyzed through tensile test. All specimens were fabricated by using the cold press hand lay-up technique. The results revealed that the hybrid composites were hardly affected by the impact up to 6J. After 6J the impacted specimens experienced a significant damage for both strength and modulus. The same goes to open hole specimens where the same trend of tensile properties were observed as impacted specimens.

Multifunctional Hybrid Carbon Nanotube/Carbon Fiber Polymer Composites

Science.gov (United States)

Kang, Jin Ho; Cano, Roberto J.; Ratcliffe, James G.; Luong, Hoa; Grimsley, Brian W.; Siochi, Emilie J.

2016-01-01

For aircraft primary structures, carbon fiber reinforced polymer (CFRP) composites possess many advantages over conventional aluminum alloys due to their light weight, higher strengthand stiffness-to-weight ratio, and low life-cycle maintenance costs. However, the relatively low electrical and thermal conductivities of CFRP composites fail to provide structural safety in certain operational conditions such as lightning strikes. Despite several attempts to solve these issues with the addition of carbon nanotubes (CNT) into polymer matrices, and/or by interleaving CNT sheets between conventional carbon fiber (CF) composite layers, there are still interfacial problems that exist between CNTs (or CF) and the resin. In this study, hybrid CNT/CF polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel® IM7/8852 prepreg. Resin concentrations from 1 wt% to 50 wt% were used to infuse the CNT sheets prior to composite fabrication. The interlaminar properties of the resulting hybrid composites were characterized by mode I and II fracture toughness testing (double cantilever beam and end-notched flexure test). Fractographical analysis was performed to study the effect of resin concentration. In addition, multi-directional physical properties like thermal conductivity of the orthotropic hybrid polymer composite were evaluated. Interleaving CNT sheets significantly improved the in-plane (axial and perpendicular direction of CF alignment) thermal conductivity of the hybrid composite laminates by 50 - 400%.

What is ''good technology''? On the heuristic competence of the engineer; ''Was ist eine ''gute'' Technologie? Zur heuristischen Kompetenz des Ingenieurs

Energy Technology Data Exchange (ETDEWEB)

Ulrich, H.G. [Erlangen-Nuernberg Univ. (Germany). Inst. fuer Systematische Theologie

1999-07-01

This paper is intended to contribute to the discourse of this book both in a direct and indirect way, in so far as the paper can be searched for the aspects and insight brought in from the perspective of the humanities, and what impact these may have on innovative processes for technological progress. The author refers for instance to aspects of ethics that go beyond the existing concept of ethics of technology, and also refer to the connection between ethics and aesthetics, so as to maintain a wider view encompassing the latter aspects. (orig./CB) [German] Der folgende Beitrag will zum Gesamtthema nicht nur direkt, sondern auch indirekt etwas beitragen, sofern er daraufhin befragt werden kann, was durch eine geisteswissenschaftliche Perspektive ins Spiel kommt und was sich daraus fuer die Innovation von technologischen Entwicklungen ergeben koennte. Dabei ist generell wichtig, dass nicht nur interdisziplinaere Kooperationen (wie zwischen Techniksoziologie und Technologie) eine Rolle spielen, sondern auch das Herausarbeiten bestimmter Aufgaben, die quer zu den Faechern oder Wissenschaftszweigen verlaufen. Das betrifft beispielsweise Aspekte der Ethik, die ueber das hinausgehen, was als Ethik der Technik bisher konzipiert worden ist. Das betrifft auch den Zusammenhang von Ethik und Aesthetik. Dafuer sollte der Blick offen bleiben. (orig.)

Impact strength on fiber-reinforced hybrid composite

International Nuclear Information System (INIS)

Firdaus, S M; Nurdina; Ariff, M Azmil

2013-01-01

Acrylonitrile-Butadiene-Styrene (ABS) has been well known composite in automotive players to have light weight with high impact strength material compared to sheet metal material which has high impact strength but heavy in weight. In this project, the impact strength properties of fabricated pure ABS were compared to the eight samples of hybrid ABS composite with different weight percentages of short fibers and particle sizes of ground rubber. The objective was to improve the impact strength in addition of short fibers and ground rubber particles. These samples were then characterized using an un-notched Izod impact test. Results show that the increasing of filler percentage yielded an adverse effect on the impact strength of the hybrid composite. The effect of the ground rubber particulate sizes however are deemed to be marginal than the effect of varying filler percentage based on the collected impact strength data from all physically tested hybrid composites

Perspective for Fibre-Hybrid Composites in Wind Energy Applications

Science.gov (United States)

2017-01-01

Increasing the efficiency of wind turbines will be vital for the wind energy sector to continue growing. The drive for increased efficiency is pushing turbine manufacturers to shift from glass fibre composite blades towards carbon/glass fibre-hybrid composite blades. This shift brings significant challenges in terms of optimising the design and understanding the failure of these new blade materials. This review therefore surveys the literature on fibre-hybrid composites, with an emphasis on aspects that are relevant for turbine blade materials. The literature on tensile, flexural, compressive, and fatigue performance is critically assessed and areas for future research are identified. Numerical simulations of fibre-hybrid composites have reached a reasonable maturity for tensile failure, but significant progress is required for flexural, compressive, and fatigue failure. Fatigue failure of fibre-hybrid composites in particular, requires more careful attention from both a modelling and experimental point of view. PMID:29117126

Perspective for Fibre-Hybrid Composites in Wind Energy Applications

Directory of Open Access Journals (Sweden)

Yentl Swolfs

2017-11-01

Full Text Available Increasing the efficiency of wind turbines will be vital for the wind energy sector to continue growing. The drive for increased efficiency is pushing turbine manufacturers to shift from glass fibre composite blades towards carbon/glass fibre-hybrid composite blades. This shift brings significant challenges in terms of optimising the design and understanding the failure of these new blade materials. This review therefore surveys the literature on fibre-hybrid composites, with an emphasis on aspects that are relevant for turbine blade materials. The literature on tensile, flexural, compressive, and fatigue performance is critically assessed and areas for future research are identified. Numerical simulations of fibre-hybrid composites have reached a reasonable maturity for tensile failure, but significant progress is required for flexural, compressive, and fatigue failure. Fatigue failure of fibre-hybrid composites in particular, requires more careful attention from both a modelling and experimental point of view.

Perspective for Fibre-Hybrid Composites in Wind Energy Applications.

Science.gov (United States)

Swolfs, Yentl

2017-11-08

Increasing the efficiency of wind turbines will be vital for the wind energy sector to continue growing. The drive for increased efficiency is pushing turbine manufacturers to shift from glass fibre composite blades towards carbon/glass fibre-hybrid composite blades. This shift brings significant challenges in terms of optimising the design and understanding the failure of these new blade materials. This review therefore surveys the literature on fibre-hybrid composites, with an emphasis on aspects that are relevant for turbine blade materials. The literature on tensile, flexural, compressive, and fatigue performance is critically assessed and areas for future research are identified. Numerical simulations of fibre-hybrid composites have reached a reasonable maturity for tensile failure, but significant progress is required for flexural, compressive, and fatigue failure. Fatigue failure of fibre-hybrid composites in particular, requires more careful attention from both a modelling and experimental point of view.

Hybrid Bridge Structures Made of Frp Composite and Concrete

Science.gov (United States)

Rajchel, Mateusz; Siwowski, Tomasz

2017-09-01

Despite many advantages over the conventional construction materials, the contemporary development of FRP composites in bridge engineering is limited due to high initial cost, low stiffness (in case of glass fibers) and sudden composite failure mode. In order to reduce the given limitations, mixed (hybrid) solutions connecting the FRP composites and conventional construction materials, including concrete, have been tested in many countries for 20 years. Shaping the hybrid structures based on the attributes of particular materials, aims to increase stiffness and reduce cost without losing the carrying capacity, lightness and easiness of bridges that includes such hybrid girders, and to avoid the sudden dangerous failure mode. In the following article, the authors described examples of hybrid road bridges made of FRP composite and concrete within the time of 20 years and presented the first Polish hybrid FRP-concrete road bridge. Also, the directions of further research, necessary to spread these innovative, advanced and sustainable bridge structures were indicated.

Processes and materials for photovoltaic applications. Workshop; Verfahren und Materialien fuer die Photovoltaik. Workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Solar energy will surely continue to be the most important renewable energy source. Since 1985, solar cell production has doubled every five years while the per unit price decreased continuously. This trend is expected to continue. Germany made important contributions both in the construction of new solar cell production plants and in the development of new PV materials and material combinations, as well as in technology and PV plant construction. The states of Thuringia and Saxony were significant contributors. In Thuringia, two solar cell production plants were constructed, while Saxon vacuum coating technology was used in nearly all new German production plants. This workshop presented the activities in Thuringia in Saxony. Contacts were to be established between partners from industry and research, joint projects were to be initiated, and society and politicians were to be informed on the success and new chances achieved. The workshop was held on the occasion of the termination of construction and the starting of experimental production of the ANTEC Solar GmbH factory at Rudisleben. [German] Im Mix der erneuerbaren Energien spielt die Solarenergie kuenftig wohl die wichtigste Rolle. Seit 1985 verdoppelt sich die Solarzellenproduktion in jeweils fuenf Jahren, gleichzeitig sank der Preis pro Leistungseinheit kontinuierlich. Dieser Trend wird weiter anhalten. Deutschland leistete in den letzten Jahren wichtige Beitraege zu dieser Entwicklung, sowohl beim Aufbau neuer Fertigungskapazitaeten fuer Solarzellen, als auch bei der Entwicklung neuer Photovoltaik-Materialien bzw. -Materialkombinationen und auf den Gebieten der Technologie und des Anlagenbaus. Der Anteil Thueringens und Sachsens an dieser positiven Entwicklung ist groesser als generell vermutet. In Thueringen entstanden zwei Unternehmen fuer die Solarzellenproduktion, der saechsische Vakuumbeschichtungs-Anlagenbau war am Aufbau fast aller neuen deutschen Fertigungsstaetten beteiligt. Auf dem Workshop werden

Bonding performance of self-adhesive flowable composites to enamel, dentin and a nano-hybrid composite.

Science.gov (United States)

Peterson, Jana; Rizk, Marta; Hoch, Monika; Wiegand, Annette

2018-04-01

This study aimed to analyze bond strengths of self-adhesive flowable composites on enamel, dentin and nano-hybrid composite. Enamel, dentin and nano-hybrid composite (Venus Diamond, Heraeus Kulzer, Germany) specimens were prepared. Three self-adhesive composites (Constic, DMG, Germany; Fusio Liquid Dentin, Pentron Clinical, USA; Vertise Flow, Kerr Dental, Italy) or a conventional flowable composite (Venus Diamond Flow, Heraeus Kulzer, Germany, etch&rinse technique) were applied to enamel and dentin. Nano-hybrid composite specimens were initially aged by thermal cycling (5000 cycles, 5-55 °C). Surfaces were left untreated or pretreated by mechanical roughening, Al 2 O 3 air abrasion or silica coating/silanization. In half of the composite specimens, an adhesive (Optibond FL, Kerr Dental, Italy) was used prior to the application of the flowable composites. Following thermal cycling (5000 cycles, 5-55 °C) of all specimens, shear bond strengths (SBS) and failure modes were analyzed (each subgroup n = 16). Statistical analysis was performed by ANOVAs/Bonferroni post hoc tests, Weibull statistics and χ 2 -tests (p composites on enamel and dentin were significantly lower (enamel: composite (enamel: 13.0 ± 5.1, dentin: 11.2 ± 6.3), and merely adhesive failures could be observed. On the nano-hybrid composite, SBS were significantly related to the pretreatment. Adhesive application improved SBS of the conventional, but not of the self-adhesive composites. The self-adhesive composite groups showed less cohesive failures than the reference group; the occurence of cohesive failures increased after surface pretreatment. Bonding of self-adhesive flowable composites to enamel and dentin is lower than bonding to a nano-hybrid composite.

Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites

Energy Technology Data Exchange (ETDEWEB)

Jawaid, M. [School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Abdul Khalil, H.P.S., E-mail: akhalilhps@gmail.com [School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Abu Bakar, A. [School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2010-11-15

Research highlights: {yields} Hybrid composites constituents of natural fibres show good mechanical performances. {yields} Hybridization with 20% jute fibre gives rise to sufficient modulus to composites. {yields} Outer or core material affect mechanical performance of hybrid composites. {yields} Impact strength of pure EFB composite is higher than hybrid composites. - Abstract: Oil palm empty fruit bunches (EFB)/jute fibre reinforced epoxy hybrid composites with different sequence of fibre mat arrangement such as EFB/jute/EFB and jute/EFB/jute were fabricated by hand lay-up method. The effect of layering patterns on the mechanical performance of the composites was studied. The hybrid composites are intended for engineering applications as an alternative to synthetic fibre composites. Mechanical performance of hybrid composites were evaluated and compared with the pure EFB, pure jute composites and neat epoxy using flexural and impact testing. The flexural properties of hybrid composite is higher than that of pure EFB composite with respect to the weight fraction of fibre, where as the impact strength of pure EFB composite is much higher than those of hybrid composites. The flexural results were interpreted using sandwich theory. The fracture surface morphology of the impact testing samples of the hybrid composites was performed by scanning electron microscopy (SEM).

Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites

International Nuclear Information System (INIS)

Jawaid, M.; Abdul Khalil, H.P.S.; Abu Bakar, A.

2010-01-01

Research highlights: → Hybrid composites constituents of natural fibres show good mechanical performances. → Hybridization with 20% jute fibre gives rise to sufficient modulus to composites. → Outer or core material affect mechanical performance of hybrid composites. → Impact strength of pure EFB composite is higher than hybrid composites. - Abstract: Oil palm empty fruit bunches (EFB)/jute fibre reinforced epoxy hybrid composites with different sequence of fibre mat arrangement such as EFB/jute/EFB and jute/EFB/jute were fabricated by hand lay-up method. The effect of layering patterns on the mechanical performance of the composites was studied. The hybrid composites are intended for engineering applications as an alternative to synthetic fibre composites. Mechanical performance of hybrid composites were evaluated and compared with the pure EFB, pure jute composites and neat epoxy using flexural and impact testing. The flexural properties of hybrid composite is higher than that of pure EFB composite with respect to the weight fraction of fibre, where as the impact strength of pure EFB composite is much higher than those of hybrid composites. The flexural results were interpreted using sandwich theory. The fracture surface morphology of the impact testing samples of the hybrid composites was performed by scanning electron microscopy (SEM).

Study of flax hybrid preforms reinforced epoxy composites

International Nuclear Information System (INIS)

Muralidhar, B. A

2013-01-01

Highlights: • We examine the thermal, viscoelastic and mechanical behaviour of flax preform hybrid composites. • The thermal stability of the matrix decrease with increasing volume fraction of flax preforms. • The effect of number of preform layers and the lay-up architecture were studied.. • Morphological study on the fractured surface of the composite laminate is carried out. - Abstracts: This study investigates the thermal, mechanical and thermomechanical properties of flax hybrid preform reinforced epoxy composites. Flax plain weave fabric and 1 × 1 weft rib knitted structures were together used as reinforcements and the composites were produced using hand lay-up technique. Specimen preparation and testing were carried out as per ASTM standards. Thermogravimetric analysis (TGA) indicates a decrease in thermal stability of the matrix polymer with the incorporation of flax hybrid preform. The dynamic mechanical analysis revealed a shift in the T g with the addition of flax hybrid preforms. Mechanical data obtained showed that tensile strength and stiffness is a product of the fibre/matrix synergy, whereas the compressive strength and stiffness are contributed by the reinforcing matrix. Additionally, investigation show that laminate with knitted preform as skin layer exhibits superior mechanical properties. However, improved tensile properties at lower fibre volume fraction, reinforces the opinion that hybrid preform composites can offer significant benefits in terms of performance, weight and overall cost. The failure mechanism was analysed, by scanning electron microscope (SEM)

Mechanical analysis of CFRP-steel hybrid composites considering the interfacial adhesion

Science.gov (United States)

Jang, Jinhyeok; Sung, Minchang; Han, Sungjin; Shim, Wonbo; Yu, Woong-Ryeol

2017-10-01

Recently, hybrid composites of carbon fiber reinforced plastics (CFRP) and steel have attracted great attention from automotive engineers due to their high potential for lightweight and multi-materials structures. Interestingly, such hybrid composites have demonstrated increased breaking strain, i.e., the breaking strain of CFRP in the hybrid was larger than that of single CFRP. As such the mechanical properties of hybrid composites could not be calculated using the rule of mixture. In addition, such increase is strongly dependent on the adhesion between CFRP and steel. In this study, a numerical analysis model was built to investigate the mechanism behind increased breaking strain of CFRP in the hybrid structure. Using cohesive zone model, the adhesion between CFRP and steel was effectively considered. The numerical results showed that the simulated mechanical behavior of the hybrid composites did not change as much as observed in experimental as the interfacial adhesion varied. We will investigate this discrepancy in detail and will report new analysis method suitable for CFRP and steel hybrid composites.

Technology and design of a transmission ECU; Technologie und Design einer Transmissions-ECU

Energy Technology Data Exchange (ETDEWEB)

Maier, Johann [AB Mikroelektronik GmbH, Salzburg (Austria); Stephan, Waldemar [Online Engineering GmbH, Dortmund (Germany)

2010-07-01

Rising raw materials and fuel prices have revived interest in electric-powered vehicles. Powertrain design will depend on the driving characteristics and vehicle type; various combinations of hybrid-specific components are available: start-stop, Mild HEV (Hybrid Electric Vehicle), HEV, Plug-in HEV, Range Extender Vehicle, battery-driven cars, and fel cell driven cars. (orig.)

Numeric models of distributed power generators and stores and their adaptation to the simulation softwaare (e.g. System NETOMAC). Simulation models for long-term operation. Project 5: Numeric models. Final report; Numerische Modelle der dezentralen Energieerzeuger und Speicher, und ihre Anpassung an die Simulationssoftware (u.a. System NETOMAC). Simulationsmodelle fuer den Langzeitbereich. Teilprojekt 5: Numerische Modelle. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Orths, A.; Bachry, A.; Lebioda, A.; Purmann, M.

2003-09-01

In the key project 'EDISON', new technologies for electric power supply are investigated systematically. This comprised the development of mathematical models for commercial planning software (NETOMAC) for different decentral power generation systems like cogeneration systems, wind power systems, PV systems and fuel cells. The models will provide integration scenarios including sites for optimal network integration, optimisation of network operation, and network feedback effects. Prior to the start of the project, the available planning software did not include such models, so that the effects of decentral power generation and storage systems in electric power supply grids could not be investigated. (orig.) [German] Im Leitprojekt 'EDISON' wird der Einsatz neuer Technologie in elektrischen Energieversorgungsnetzen systemtechnisch untersucht. Dafuer werden sowohl fuer verschiedene Speicher wie Batteriespeicher, als auch unterschiedliche dezentrale Erzeugungseinheiten wie BHKW, Windkraftanlagen, Photovoltaikanlagen und Brennstoffzellen mathematische Modelle fuer uebliche Planungssoftware (NETOMAC) erarbeitet. Mit den Modellen sollen Einsatzszenarien fuer diese Betriebsmittel abgeleitet und anhand dynamischer Simulationsrechnungen Standorte der optimalen Netzanbindung, die Optimierung des Netzbetriebs und Netzrueckwirkung untersucht werden koennen. Vor Beginn des Projektes fehlten entsprechende Modelle in vorhandener Planungssoftware, so dass die Wirkung von dezentralen Erzeugern und Speichern in elektrischen Energieversorgungsnetzen nicht untersucht werden konnte. (orig.)

Experimental and theoretical assessment of flexural properties of hybrid natural fibre composites

DEFF Research Database (Denmark)

Raghavalu Thirumalai, Durai Prabhakaran; Toftegaard, Helmuth Langmaack; Markussen, Christen Malte

2014-01-01

The concept of hybridization of natural fibre composites with synthetic fibres is attracting increasing scientific attention. The present study addresses the flexural properties of hybrid flax/glass/epoxy composites to demonstrate the potential benefits of hybridization. The study covers both...... experimental and theoretical assessments. Composite laminates with different hybrid fibre mixing ratios and different layer configurations were manufactured, and their volumetric composition and flexural properties were measured. The relationship between volume fractions in the composites is shown to be well...... predicted as a function of the hybrid fibre mixing ratio. The flexural modulus of the composites is theoretically assessed by using micromechanical models and laminate theory. The model predictions are compared with the experimentally determined flexural properties. Both approaches show that the flexural...

Shape Memory Composite Hybrid Hinge

Science.gov (United States)

Fang, Houfei; Im, Eastwood; Lin, John; Scarborough, Stephen

2012-01-01

There are two conventional types of hinges for in-space deployment applications. The first type is mechanically deploying hinges. A typical mechanically deploying hinge is usually composed of several tens of components. It is complicated, heavy, and bulky. More components imply higher deployment failure probability. Due to the existence of relatively moving components among a mechanically deploying hinge, it unavoidably has microdynamic problems. The second type of conventional hinge relies on strain energy for deployment. A tape-spring hinge is a typical strain energy hinge. A fundamental problem of a strain energy hinge is that its deployment dynamic is uncontrollable. Usually, its deployment is associated with a large impact, which is unacceptable for many space applications. Some damping technologies have been experimented with to reduce the impact, but they increased the risks of an unsuccessful deployment. Coalescing strain energy components with shape memory composite (SMC) components to form a hybrid hinge is the solution. SMCs are well suited for deployable structures. A SMC is created from a high-performance fiber and a shape memory polymer resin. When the resin is heated to above its glass transition temperature, the composite becomes flexible and can be folded or packed. Once cooled to below the glass transition temperature, the composite remains in the packed state. When the structure is ready to be deployed, the SMC component is reheated to above the glass transition temperature, and it returns to its as-fabricated shape. A hybrid hinge is composed of two strain energy flanges (also called tape-springs) and one SMC tube. Two folding lines are placed on the SMC tube to avoid excessive strain on the SMC during folding. Two adapters are used to connect the hybrid hinge to its adjacent structural components. While the SMC tube is heated to above its glass transition temperature, a hybrid hinge can be folded and stays at folded status after the temperature

Deutsch-slawischer Siedlungs- und Sprachkontakt im Gebiet zwischen Saale und Neiße – vorgestellt an ausgewählten Ortsnamen (Siedlungsnamen

Directory of Open Access Journals (Sweden)

Inge Bily

2015-12-01

Full Text Available Saale und Elbe bilden im Wesentlichen die westliche Begrenzung des ehemals kompakten altsorbischen Sprachgebietes. Im Norden schließt das Altsorbische an das Altpolabische, im Osten und Südosten an das Polnische und Tschechische an. Eigennamen bilden eine wichtige Quelle sowohl für die Aufhellung der Geschichte der Besiedlung wie auch ethnischer, sprachlicher und sozialer Verhältnisse, denn historische Siedlungsprozesse fanden ihren Niederschlag u.a. in historischen Belegen von Namen. Diese Belege wie auch die Ableitungsbasen und Benennungsmotive ebenso wie die phonologischen und morphologischen Merkmale der Namen des altsorbischen Kontaktgebietes enthalten eine Vielzahl von Zeugnissen deutsch-slawischer Kontinuität. Auf der Grundlage umfangreicher Studien zu Ortsnamen stellt der Beitrag ausgewählte Beispiele vor. Im ehemals altsorbischen Kontaktgebiet können Ortsnamen (Siedlungsnamen und ihre historische Überlieferung Hinweise auf Siedlungs- und Sprachkontakt geben. Dies belegen eine ganze Reihe von Merkmalen, so z.B.: 1. Unterscheidende Bestimmungswörter 2. Parallele Namengebung mit zeitweiliger Mehrnamigkeit 3. Umbenennung 4. Übersetzung 5. Benennungsparallelismus im deutsch-slawischen Kontaktgebiet 6. Scheinbare sekundäre semantische Verankerung (SSSV 7. Namenpaare 8. Unterscheidende Zusätze 9. Mischnamen (Hybride

Mechanical Characterization of Baslat Based Natural Hybrid Composites for Aerospace Applications

Science.gov (United States)

Alexander, J.; Elphej Churchill, S. J.

2017-05-01

Advanced composites have attracted aircraft designers due to its high strength to weight ratio, high stiffness to weight ratio, tailoring properties, hybridization of opposites etc. Moreover the cost reduction is also another important requirement of structural components. Basalt fibers are new entry in structural field which has excellent properties more or less equivalent to GFRP composites. Using these basalt fibres, new hybrid composites were developed by combining basalt fibres with natural fibres. The mechanical and thermal properties were determined and compared with BFRP and GFRP composites. Results proved that hybrid composites have some good qualities.

Tensile properties of interwoven hemp/PET (Polyethylene Terephthalate) epoxy hybrid composites

Science.gov (United States)

Ahmad, M. A. A.; Majid, M. S. A.; Ridzuan, M. J. M.; Firdaus, A. Z. A.; Amin, N. A. M.

2017-10-01

This paper describes the experimental investigation of the tensile properties of interwoven Hemp/PET hybrid composites. The effect of hybridization of hemp (warp) with PET fibres (weft) on tensile properties was of interest. Hemp and PET fibres were selected as the reinforcing material while epoxy resin was chosen as the matrix. The interwoven Hemp/PET fabric was used to produce hybrid composite using a vacuum infusion process. The tensile test was conducted using Universal Testing Machine in accordance to the ASTM D638. The tensile properties of the interwoven Hemp/PET hybrid composite were then compared with the neat woven hemp/epoxy composite. The results show that the strength of hemp/PET with the warp direction was increased by 8% compared to the neat woven hemp composite. This enhancement of tensile strength was due to the improved interlocking structure of interwoven Hemp/PET hybrid fabric.

Presentation of the Well Tractor Concept and practical experience in extreme conditions; Vorstellung des Well Tractor Konzepts mit Erfahrungen bei Einsaetzen unter Extrembedingungen

Energy Technology Data Exchange (ETDEWEB)

Kater, H.; Preiss, F. [Preussag Wireline- und Messservice, Edemissen (Germany)

1998-12-31

So-called extended reach boreholes with horizontal sections of more than 2000 m, short radius drilling, multilaterals and other variations are common enough. Problems occur when this type of borehole needs to be surveyed or modified. The contribution describes the newly developed ``Well Tracotor{sup circledR}`` technology and outlines its potential. (orig.) [Deutsch] Sogenannte Extended Reach Bohrungen mit Horizontalsektionen von mehr als 2.000 Meter Laenge, Short Radius Drilling, Multilaterals und andere Variationen sind bohrtechnisch einwandfrei durchfuehrbar und gehoeren zum gaengigen Repertoire der Bohrfirmen. Grosse Probleme entstehen jedoch wenn dieser Bohrungstyp vermessen, komplettiert oder aufgewaeltigt werden soll. Insbesondere Bohrlochmessfirmen haben es in den letzten ca. 20 Jahren versaeumt Innovationen zwecks oekonomischen Einsatzes ihrer Technologie in diesen Bohrungen bereitzustellen. Die Durchfuehrung von Perforationen und Bohrlochmessungen, das Setzen von Stopfen, Schneiden von Rohren und auch einfachste Slickline-Operationen sind bei einer Bohrlochneigung beginnend bei ca. 60 bis 80 nur unter Anwendung von kosten- und zeitintensiven Verfahren moeglich. Eine guenstige Alternative zu diesen Verfahren bietet der Well Tractor. Diese Technologie ermoeglicht das Einfahren von Geraeten, die ueblicherweise am Kabel oder Draht eingesetzt werden, in Horizontalbohrungen. Im Folgenden werden das technische Konzept, ein Vergleich mit alternativen Verfahren, und verschiedene Referenzen des Well Tracotors {sup trademark} dargestellt. Weiterhin wird auf die Modifikationen eingegangen, die noetig waren, um dieses Geraet den Gegebenheiten in tiefen, heissen Gasbohrungen anzupassen. Abschliessend soll durch einen Ausblick auf zum Teil schon im Feldtest befindliche Weiterentwicklungen das weitere Potential dieser Technologie aufgezeichnet werden. (orig.)

312 ----10 Dec 2009.indd [Final version].indd

African Journals Online (AJOL)

10. Dez. 2009 ... MENSCH UND TECHNOLOGIE IN MARSHALL MCLUHAN'S ... Computersystems kann Schlangen vor der Supermarktkasse verursachen ... Umgebung und der neu entstandene Lebensraum erzeugt durch ... vielen auf ein Verständnis der Medien als Artefakte (Instrumente) .... Energiequellen zu benutzen.

Von kleinen Stupsern und großen Schubsern – Politik und Ethik des Libertären Paternalismus auf dem Prüfstand

Directory of Open Access Journals (Sweden)

Drerup Johannes

2016-07-01

Full Text Available Das von Cass Sunstein und Richard Thaler ausgearbeitete Projekt eines Libertären Paternalismus stellt fraglos einen der zurzeit meistdiskutierten neopaternalistischen Theorieentwürfe dar. Als hybride Mischung zwischen Theorieprogramm, politischer Bewegung und praxis- und anwendungsorientiertem Policy-Manual, das zuweilen Züge eines populären philosophischen Lebensratgebers trägt, hat Libertärer Paternalismus viel Zuspruch, aber auch heftige Kritik auf sich gezogen, die in diesem Aufsatz auf ihre Plausibilität geprüft werden. Zu diesem Zweck geben die Autoren zunächst einen kurzen Überblick über Ausgangspunkte, Leitorientierungen und Problemvorgaben des Theorie- und Politikprogramms des Libertären Paternalismus. In einem zweiten Schritt werden zentrale (metaphorische Konzepte und Unterscheidungen des libertär paternalistischen Rationales vorgestellt und problematisiert. Daran anschließend werden drei der prominentesten Kritikpunkte an Libertärem Paternalismus auf den Prüfstand gestellt. Hierzu gehören der Manipulationseinwand, Kritiken, die sich auf grundlegende Rechtfertigungsprobleme des Libertären Paternalismus beziehen, und Einwände, die auf langfristige negative Folgen des Nudging verweisen („Slippery-Slope-Argumente“.

Investigations on mechanical properties of aluminum hybrid composites

Directory of Open Access Journals (Sweden)

Dora Siva Prasad

2014-01-01

Full Text Available A double stir casting process was used to fabricate aluminum composites reinforced with various volume fractions of 2, 4, 6, and 8 wt% RHA and SiC particulates in equal proportions. Properties such as hardness, density, porosity and mechanical behavior of the unreinforced and Al/x%RHA/x%SiC (x = 2, 4, 6, and 8 wt% reinforced hybrid composites were examined. Scanning electron microscope (model JSM-6610LV was used to study the microstructural characterization of the composites. It was observed that the hardness and porosity of the hybrid composite increased with increasing reinforcement volume fraction and density decreased with increasing particle content. It was also observed that the UTS and yield strength increase with an increase in the percent weight fraction of the reinforcement particles, whereas elongation decreases with the increase in reinforcement. The increase in strength of the hybrid composites is probably due to the increase in dislocation density. A systematic study of the base alloy and composites was done using the Brinell hardness measurement and the corresponding age hardening curves were obtained. It was observed that in comparison to that of the base aluminum alloy, the precipitation kinetics of the composites were accelerated by adding the reinforcement. This effectively reduced the time for obtaining the maximum hardness by the aging heat treatment.

BPM Column (Business Process Management Column) - No.5

NARCIS (Netherlands)

Reichert, M.U.; Rinderle, S.B.; Weber, B.

Inhaltliche Schwerpunkte dieser Kolumne bilden Arbeiten zu Fehlern in Prozessmodellen und zur Definition von Prozessänderungen. Prozess-Management-Technologie wird in der Praxis nur dann sinnvoll einsetzbar sein, wenn Prozessmodelle fehlerfrei spezifiziert und später auf hoher Abstraktionsebene

List of reports in the field of reactor safety research of BMFT, CEA, EPRI, JSTA und USNRC

International Nuclear Information System (INIS)

1989-11-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning single problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l'Engergie Atomique (CEA), the Japan Science and Technology Agency (JSTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programme of the BMFT, reporting organization. The list of reports appears quarterly. (orig.) [de

Hybridization and control of a mobile direct methanol fuel cell system; Hybridisierung und Regelung eines mobilen Direktmethanol-Brennstoffzellen-Systems

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, Joerg Christoph

2010-07-01

Direct methanol fuel cells (DMFCs) are characterized by the fact that they directly convert the chemical energy of the liquid fuel methanol into electrical energy. Methanol has a high energy density and can be stored relatively easily. Due to these advantages, direct methanol fuel cell systems are suitable, for example, as a battery replacement for light-traction applications in the kW class. Since refuelling is much faster than recharging a battery, almost interruption-free operation is possible. The aim of this thesis is therefore to develop a direct methanol fuel cell system for light-traction applications. The systems technology development and characterization of a mobile direct methanol fuel cell system is initially examined in general and then applied to the example of a horizontal order picker, a type of forklift truck. A hybridization and control concept is developed for this type of truck. The procedure is structured into the theoretical characterization of the application, the development of theoretical concepts and a concluding systems analysis using data from the test stand and simulations. The characteristic driving cycle of the application results from the characterization. The concept development is based on key data such as maximum peak power during acceleration and braking as well as average power. The two-stage theoretical development of a hybridization concept is based on a pure fuel cell vehicle. A systems analysis of all possible concepts with respect to the criteria of fuel cell power, total system efficiency and dynamic fuel cell loading eventually leads to the preferred concept of indirect coupling. A cascade controller with map control, the control concept developed for this purpose, keeps the energy storage unit at a constant state of charge and provides for the fuel cell aging protection as well as aging detection. The driving cycle, operational states of the vehicle and the efficiencies of the individual components play a decisive role

Physical properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites

Science.gov (United States)

Siakeng, R.; Jawaid, M.; Ariffin, H.; Sapuan, S. M.

2018-01-01

This study examined the physical behaviour of Coir fibres (CF)/Pineapple leaf fibres (PALF)/Poly lactic acid (PLA) composites. In this research, coir and PALF reinforced PLA hybrid composites were fabricated by hand lay-up process and hot press. The aim of this work is to do comparative study on density, water absorption (WA) and thickness swelling (TS) of untreated CF/PALF reinforced PLA composites and hybrid composites. The effect of different fibre ratios in hybridization on density, WA and TS of CF/PALF hybrid composites were also analyzed and C7P3 showed highest density while P30 had lowest. The results indicated that the density varies on different fibre ratio. WA and TS of CF/PALF composites and hybrid composites vary with fibres ratio and soaking duration. WA and TS of untreated CF/PALF hybrid composites were increased by increasing coir fibre ratio so, C30 showed highest WA and TS whereas P30 and C1P1 showed least WA and TS respectively apart from neat PLA.

Performance Investigation of a Full-Scale Hybrid Composite Bull Gear

Science.gov (United States)

LaBerge, Kelsen; Handschuh, Robert; Roberts, Gary; Thorp, Scott

2016-01-01

Hybrid composite gears have been investigated as a weight saving technology for rotorcraft transmissions. These gears differ from conventional steel gears in that the structural material between the shaft interface and the gear rim is replaced with a lightweight carbon fiber composite. The work discussed here is an extension of previous coupon level hybrid gear tests to a full-scale bull gear. The NASA Glenn Research Center High-Speed Helical Gear Rig was modified for this program allowing several hybrid gear web configurations to be tested while utilizing the same gear rim. Testing was performed on both a baseline (steel) web configuration and a hybrid (steel-composite)configuration. Vibration, orbit and temperature data were recorded and compared between configurations. Vibration levels did not differ greatly between the hybrid and steel configurations, nor did temperature differential between inlet and outlet. While orbit shape displayed differences between the hybrid and baseline configurations, the general overall amplitude was comparable. The hybrid configuration discussed here successfully ran at 3300 hp(2,460 kW), however, progressive growth of the orbit while running at this test condition discontinued the test. Researchers continue to search for the cause of this orbit shift.

Hydraulic and physicochemical processes in direct gas injection; Hydraulische und physiko-chemische Prozesse bei der Direktgasinjektion

Energy Technology Data Exchange (ETDEWEB)

Geistlinger, H.; Lazik, D.; Beckmann, A.; Krauss, G. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Dept. Hydrogeologie, Lepzig (Germany)

2004-07-01

The direct injection of gases into the subsoil is a promising and cost-effective technology for the remediation of groundwater aquifers. In view of the fact that oxygen is the commonest limiting factor in numerous types of contamination and a large number of organic groundwater pollutants are aerobically degradable this technology is suitable as a relatively broad-band, i.e. relatively nonselective remediation method for the treatment of complex pollutant mixtures consisting of aliphatics and aromatics such as are found in many cases of groundwater contamination at former sites of the chemical industry in Saxony Anhalt. The goal of the present research project was to gain an understanding, at a bench-scale, of the more important processes that determine the efficiency of direct gas injection in porous media (groundwater aquifers), to validate process models and develop prognostic models for existing sites. [German] Das Einbringen von reaktiven Gasen in den Untergrund mittels Direktgasinjektion stellt eine vielversprechende und kostenguenstige in-situ Technologie zur Sanierung kontaminierter Grundwasserleiter dar. Da Sauerstoff der am haeufigsten limitierende Faktor fuer eine Vielzahl von Schadensfaellen ist und eine Vielzahl von organischen Schadstoffen im Grundwasser aerob abbaubar ist, kann dieser Verfahrensansatz als eine ''breitbandige'', d.h. relativ unselektive Sanierungsmassnahme fuer komplexe Schadstoffgemische aus Aliphaten und Aromaten, wie sie bei vielen Grundwasser-Schadensfaellen ehemaliger Chemiestandorte des Landes Sachsen-Anhalt anzutreffen sind, angewendet werden. Ziel des Forschungsprojektes war es, wichtige Prozesse, die die Effizienz von Direktgasinjektionen in poroese Medien (Grundwasserleiter) bestimmen, im Bench-Scale zu verstehen, Prozessmodelle zu validieren und Prognosemodelle fuer reale Standorte zu entwickeln. (orig.)

Fatigue of hybrid glass/carbon composites: 3D computational studies

DEFF Research Database (Denmark)

Dai, Gaoming; Mishnaevsky, Leon

2014-01-01

3D computational simulations of fatigue of hybrid carbon/glass fiber reinforced composites is carried out using X-FEM and multifiber unit cell models. A new software code for the automatic generation of unit cell multifiber models of composites with randomly misaligned fibers of various properties...... and geometrical parameters is developed. With the use of this program code and the X-FEM method, systematic investigations of the effect of microstructure of hybrid composites (fraction of carbon versus glass fibers, misalignment, and interface strength) and the loading conditions (tensile versus compression...... cyclic loading effects) on fatigue behavior of the materials are carried out. It was demonstrated that the higher fraction of carbon fibers in hybrid composites is beneficial for the fatigue lifetime of the composites under tension-tension cyclic loading, but might have negative effect on the lifetime...

Adoption et retombées d'une nouvelle technologie de dépistage des infections à ERV en contexte hospitalier québécois

OpenAIRE

Attieh, Randa

2015-01-01

La « Polymerase Chain Reaction» (PCR) est une technologie moléculaire qui se veut performante pour détecter les entérocoques résistants à la vancomycine (ERV) en contexte hospitalier. La traduction de cette technologie dans les pratiques professionnelles des acteurs est conceptualisée comme un processus d’adaptation et d’ajustements des rôles entre la technologie et le milieu hospitalier. Par souci de mieux comprendre la traduction de la nouvelle technologie de dépistage PCR dans les pratique...

Preparation of zeolite-A/chitosan hybrid composites and their bioactivities and antimicrobial activities

International Nuclear Information System (INIS)

Yu, Liang; Gong, Jie; Zeng, Changfeng; Zhang, Lixiong

2013-01-01

Zeolite-A/chitosan hybrid composites with zeolite contents of 20–55 wt.% were prepared by in situ transformation of silica/chitosan mixtures in a sodium aluminate alkaline solution through impregnation–gelation–hydrothermal synthesis. The products were characterized by X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, scanning electron microscopy, thermogravimetric analysis, and mercury penetration porosimetry. Their in vitro bioactivities were examined using as-synthesized and Ca 2+ -exchanged hybrid composites in simulated body fluid (SBF) for hydroxyapatite (HAP) growth. Their antimicrobial activities for Escherichia coli (E. coli) in trypticase soy broth (TSB) were evaluated using Ag + -exchanged hybrid composites. The zeolite-A/chitosan hybrid composites could be prepared as various shapes, including cylinders, plates and thin films. They possessed macropores with pore sizes ranging from 100 to 300 μm and showed compressive mechanical strength as high as 3.2 MPa when the zeolite content was 35 wt.%. Fast growth on the Ca 2+ -exchanged hybrid composites was observed with the highest weight gain of 51.4% in 30 days. The 35 wt.% Ag + -exchanged hybrid composite showed the highest antimicrobial activity, which could reduce the 9 × 10 6 CFU mL −1 E. coli concentration to zero within 4 h of incubation time with the Ag + -exchanged hybrid composite amount of 0.4 g L −1 . The bioactivity and antimicrobial activity could be combined by ion-exchanging the composites first with Ca 2+ and then with Ag + . These zeolite-A/chitosan hybrid composites have potential applications on tissue engineering and antimicrobial food packaging. - Graphical abstract: Zeolite A/chitosan hybrid composites were prepared by in situ transformation of precursors in the chitosan matrix, which possess macroporous structures and exhibit superior bioactivity and antimicrobial activity and potential biomedical application. Highlights: • Zeolite A

Preparation of zeolite-A/chitosan hybrid composites and their bioactivities and antimicrobial activities

Energy Technology Data Exchange (ETDEWEB)

Yu, Liang; Gong, Jie [State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009 (China); Zeng, Changfeng [College of Mechanic and Power Engineering, Nanjing University of Technology, Nanjing 210009 (China); Zhang, Lixiong, E-mail: lixiongzhang@yahoo.com [State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009 (China)

2013-10-15

Zeolite-A/chitosan hybrid composites with zeolite contents of 20–55 wt.% were prepared by in situ transformation of silica/chitosan mixtures in a sodium aluminate alkaline solution through impregnation–gelation–hydrothermal synthesis. The products were characterized by X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, scanning electron microscopy, thermogravimetric analysis, and mercury penetration porosimetry. Their in vitro bioactivities were examined using as-synthesized and Ca{sup 2+}-exchanged hybrid composites in simulated body fluid (SBF) for hydroxyapatite (HAP) growth. Their antimicrobial activities for Escherichia coli (E. coli) in trypticase soy broth (TSB) were evaluated using Ag{sup +}-exchanged hybrid composites. The zeolite-A/chitosan hybrid composites could be prepared as various shapes, including cylinders, plates and thin films. They possessed macropores with pore sizes ranging from 100 to 300 μm and showed compressive mechanical strength as high as 3.2 MPa when the zeolite content was 35 wt.%. Fast growth on the Ca{sup 2+}-exchanged hybrid composites was observed with the highest weight gain of 51.4% in 30 days. The 35 wt.% Ag{sup +}-exchanged hybrid composite showed the highest antimicrobial activity, which could reduce the 9 × 10{sup 6} CFU mL{sup −1}E. coli concentration to zero within 4 h of incubation time with the Ag{sup +}-exchanged hybrid composite amount of 0.4 g L{sup −1}. The bioactivity and antimicrobial activity could be combined by ion-exchanging the composites first with Ca{sup 2+} and then with Ag{sup +}. These zeolite-A/chitosan hybrid composites have potential applications on tissue engineering and antimicrobial food packaging. - Graphical abstract: Zeolite A/chitosan hybrid composites were prepared by in situ transformation of precursors in the chitosan matrix, which possess macroporous structures and exhibit superior bioactivity and antimicrobial activity and potential biomedical

Evaluation of mechanical properties of hybrid fiber (hemp, jute, kevlar) reinforced composites

Science.gov (United States)

Suresha, K. V.; Shivanand, H. K.; Amith, A.; Vidyasagar, H. N.

2018-04-01

In today's world composites play wide role in all the engineering fields. The reinforcement of composites decides the properties of the material. Natural fiber composites compared to synthetic fiber possesses poor mechanical properties. The solution for this problem is to use combination of natural fiber and synthetic fiber. Hybridization helps to improve the overall mechanical properties of the material. In this study, hybrid reinforced composites of Hemp fabric/Kevlar fabric/Epoxy and Jute fabric/ Kevlar fabric/Epoxy composites are fabricated using Simple hand layup technique followed by Vacuum bagging process. Appropriate test methods as per standards and guidelines are followed to analyze mechanical behavior of the composites. The mechanical characteristics like tensile, compression and flexural properties of the hybrid reinforced composites are tested as per the ASTM standards by series of tensile test; compression test and three point bending tests were conducted on the hybrid composites. A quantitative relationship between the Hemp fabric/Kevlar fabric/Epoxy and Jute/ Kevlar fabric/Epoxy has been established with constant thickness.

Tensile and Compressive Properties of Woven Kenaf/Glass Sandwich Hybrid Composites

Directory of Open Access Journals (Sweden)

Mohaiman J. Sharba

2016-01-01

Full Text Available Monotonic (tensile and compression properties of woven kenaf/glass reinforced unsaturated polyester sandwich hybrid composites have been experimentally investigated. Five types of composites laminates were fabricated using a combination of hand lay-up and cold press techniques, postcured for two hours at 80°C and left for 48 hours at room temperature. The hybrid composites contained fixed six layers of glass as a shell, three on each side, whereas the number of core kenaf layers was changed in three stages to get S1, S2, and S3 hybrid composites. Composites specimens with pure glass and kenaf were also fabricated for comparison. It was found that one kenaf layer replaced about 20% of total fiber weight fraction of the composite; this leads to reducing the density of final hybrid composite by 13%. Besides, in mechanical properties perspective, there are less than 1% reduction in compression strength and 40% in tensile strength when compared to pure glass composite. Generally, the results revealed that the best performance was observed in S1, which showed a good balance of all mechanical properties determined in this work.

The power of meat : Ontwikkeling in de vleeswetenschap en -technologie (1)

NARCIS (Netherlands)

Verkleij, T.J.

2013-01-01

Turkije verwelkomde afgelopen zomer 388 onderzoekers uit de gehele wereld voor het congres "The power of meat in the 21st Century". Een week lang lag de focus in Izmir op recente ontwikkelingen in de vleeswetenschap en -technologie.

Základy fúzní energetiky III. – Reaktorové technologie

Czech Academy of Sciences Publication Activity Database

Entler, Slavomír; Mlynář, Jan; Dostál, V.

Srpen (2016), č. článku 14587. ISSN 1801-4399 Institutional support: RVO:61389021 Keywords : Nuclear fusion * reactor technologies * plasma Subject RIV: JF - Nuclear Energetics http://energetika.tzb-info.cz/elektroenergetika/14587-zaklady-fuzni-energetiky-iii-reaktorove-technologie

Vibration and Operational Characteristics of a Composite-Steel (Hybrid) Gear

Science.gov (United States)

Handschuh, Robert F.; LaBerge, Kelsen E.; DeLuca, Samuel; Pelagalli, Ryan

2014-01-01

Hybrid gears have been tested consisting of metallic gear teeth and shafting connected by composite web. Both free vibration and dynamic operation tests were completed at the NASA Glenn Spur Gear Fatigue Test Facility, comparing these hybrid gears to their steel counterparts. The free vibration tests indicated that the natural frequency of the hybrid gear was approximately 800 Hz lower than the steel test gear. The dynamic vibration tests were conducted at five different rotational speeds and three levels of torque in a four square test configuration. The hybrid gears were tested both as fabricated (machined, composite layup, then composite cure) and after regrinding the gear teeth to the required aerospace tolerance. The dynamic vibration tests indicated that the level of vibration for either type of gearing was sensitive to the level of load and rotational speed.

Hybrid Gear Preliminary Results-Application of Composites to Dynamic Mechanical Components

Science.gov (United States)

Handschuh, Robert F.; Roberts Gary D.; Sinnamon, R.; Stringer, David B.; Dykas, Brian D.; Kohlman, Lee W.

2012-01-01

Composite spur gears were fabricated and then tested at NASA Glenn Research Center. The composite material served as the web of the gear between the gear teeth and a metallic hub for mounting to the torque-applying shaft. The composite web was bonded only to the inner and outer hexagonal features that were machined from an initially all-metallic aerospace quality spur gear. The Hybrid Gear was tested against an all-steel gear and against a mating Hybrid Gear. As a result of the composite to metal fabrication process used, the concentricity of the gears were reduced from their initial high-precision value. Regardless of the concentricity error, the hybrid gears operated successfully for over 300 million cycles at 10000 rpm and 490 in.*lbs torque. Although the design was not optimized for weight, the composite gears were found to be 20% lighter than the all-steel gears. Free vibration modes and vibration/noise tests were also conduct to compare the vibration and damping characteristic of the Hybrid Gear to all-steel gears. The initial results indicate that this type of hybrid design may have a dramatic effect on drive system weight without sacrificing strength.

High-productivity laser deposition welding using powder and wire. Final report of the project 'Higher efficiency of thermal coating plants by a combination of energy sources'; Hochproduktives Laser-Auftragschweissen mit Pulver und Draht. Ergebnisbericht zum Verbundvorhaben ''Wirkungsgradsteigerung thermischer Beschichtungsanlagen durch Energiequellenkombination''. SPRAYNERGY

Energy Technology Data Exchange (ETDEWEB)

Nowotny, Steffen (ed.)

2013-05-01

Excellent precision, maximum mechanical strength and selective properties of the generated coatings and 3D structures caused a breakthrough of laser deposition welding in industrial production. However, the technology is limited by its low deposition rates in those cases where large-surface components are to be coated while laser-typical corrosion and wear resistance characteristics are to be achieved. Examples are, e.g. hydraulic cylinders for offshore applications, tools for petroleum or gas production and mining, or large-scale conveyors. In these cases, modern laser hybrid technologies open up new applications. By effectively combining the laser energy with other energy sources, e.g. inductive heating, autogenic flames or electric resistance, high deposition rates are achieved with excellent coating qualities, which makes the laser process competitive also in the case of large-surface coatings. (orig./AKB) [German] Exzellente Praezision, hoechste mechanische Festigkeit und massgeschneiderte Eigenschaften von Oberflaechenschichten wie auch generativ erzeugten 3D-Strukturen: diese Merkmale haben dem Auftragschweissen mit Laserstrahlen zum Durchbruch in der industriellen Produktion verholfen. Die geringen Auftragraten setzen der Technologie jedoch in jenen Faellen Grenzen, wo es um Flaechenbeschichtungen grosser Bauteile geht, deren Einsatz aber dennoch die lasertypischen Schichteigenschaften hinsichtlich Korrosions- oder Verschleissbestaendigkeit erfordert. Beispiele sind lange Hydraulikzylinder im Offshore-Bereich, Werkzeuge der Oel- und Gasfoerderung und des Bergbaus sowie grosse Foerderschnecken. Hier erweitern moderne Laser-Hybridtechnologien wirkungsvoll die Einsatzmoeglichkeiten. Durch effiziente Kombination der Laserenergie mit anderen Energiequellen in Form induktiver Erwaermung, autogener Flammen oder elektrischem Widerstand werden hohe Auftragraten bei gleichzeitigem Erhalt der besonderen Schichtqualitaet erreicht, die das Laserverfahren auch bei

Hybrid Ceramic Matrix Fibrous Composites: an Overview

International Nuclear Information System (INIS)

Naslain, R

2011-01-01

Ceramic-Matrix Composites (CMCs) consist of a ceramic fiber architecture in a ceramic matrix, bonded together through a thin interphase. The present contribution is limited to non-oxide CMCs. Their constituents being oxidation-prone, they are protected by external coatings. We state here that CMCs display a hybrid feature, when at least one of their components is not homogeneous from a chemical or microstructural standpoint. Hybrid fiber architectures are used to tailor the mechanical or thermal CMC-properties whereas hybrid interphases, matrices and coatings to improve CMC resistance to aggressive environments.

Hybrid Ceramic Matrix Fibrous Composites: an Overview

Science.gov (United States)

Naslain, R.

2011-10-01

Ceramic-Matrix Composites (CMCs) consist of a ceramic fiber architecture in a ceramic matrix, bonded together through a thin interphase. The present contribution is limited to non-oxide CMCs. Their constituents being oxidation-prone, they are protected by external coatings. We state here that CMCs display a hybrid feature, when at least one of their components is not homogeneous from a chemical or microstructural standpoint. Hybrid fiber architectures are used to tailor the mechanical or thermal CMC-properties whereas hybrid interphases, matrices and coatings to improve CMC resistance to aggressive environments.

S 400 BlueHYBRID. First hybrid vehicle with Li-ion technology; S 400 BlueHYBRID. Erstes Hybridfahrzeug mit Li-Ionen-Technologie

Energy Technology Data Exchange (ETDEWEB)

Vollrath, Oliver; Armstrong, Neil; Schenk, Juergen; Bitsche, Otmar; Lamm, Arnold [Daimler AG, Stuttgart (Germany)

2009-07-01

Mercedes Benz advances the electrification of the drive strand in all performance classes and in all models from the start-stop system till to the full hybrid. Thereby, the S 400 BlueHYBRID presents the first Mercedes-Benz hybrid. Equipped with the characteristics of a start-stop system, with a recovery of the brake energy and with an electrical support of the drive, this hybrid obtains a saving of the consumption of approximately 20 %. By means of the design of the components and by means of the selection of a standard installation size, all hybrid-specific construction units in the vehicle porch could be arranged. Here, a special role comes to the used battery technology, since it became possible to arrange the hybrid battery in the size and the building area of a conventional starter battery accordingly.

Gestionnaire, Relations d'affaires en technologie de l'information (TI ...

International Development Research Centre (IDRC) Digital Library (Canada)

Résumé des fonctions En tant que membre de l'équipe de direction de la Division ... et la maintenance d'un système de technologie de l'information (TI) intégré en ... d'un contrat de consultation), évaluer les propositions et choisir la meilleure.

Preparation of zeolite-A/chitosan hybrid composites and their bioactivities and antimicrobial activities.

Science.gov (United States)

Yu, Liang; Gong, Jie; Zeng, Changfeng; Zhang, Lixiong

2013-10-01

Zeolite-A/chitosan hybrid composites with zeolite contents of 20-55 wt.% were prepared by in situ transformation of silica/chitosan mixtures in a sodium aluminate alkaline solution through impregnation-gelation-hydrothermal synthesis. The products were characterized by X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, scanning electron microscopy, thermogravimetric analysis, and mercury penetration porosimetry. Their in vitro bioactivities were examined using as-synthesized and Ca(2+)-exchanged hybrid composites in simulated body fluid (SBF) for hydroxyapatite (HAP) growth. Their antimicrobial activities for Escherichia coli (E. coli) in trypticase soy broth (TSB) were evaluated using Ag(+)-exchanged hybrid composites. The zeolite-A/chitosan hybrid composites could be prepared as various shapes, including cylinders, plates and thin films. They possessed macropores with pore sizes ranging from 100 to 300 μm and showed compressive mechanical strength as high as 3.2 MPa when the zeolite content was 35 wt.%. Fast growth on the Ca(2+)-exchanged hybrid composites was observed with the highest weight gain of 51.4% in 30 days. The 35 wt.% Ag(+)-exchanged hybrid composite showed the highest antimicrobial activity, which could reduce the 9×10(6) CFU mL(-1)E. coli concentration to zero within 4h of incubation time with the Ag(+)-exchanged hybrid composite amount of 0.4 g L(-1). The bioactivity and antimicrobial activity could be combined by ion-exchanging the composites first with Ca(2+) and then with Ag(+). These zeolite-A/chitosan hybrid composites have potential applications on tissue engineering and antimicrobial food packaging. Copyright © 2013 Elsevier B.V. All rights reserved.

Hybrid fiber and nanopowder reinforced composites for wind turbine blades

Directory of Open Access Journals (Sweden)

Nikoloz M. Chikhradze

2015-01-01

Full Text Available The results of an investigation into the production of wind turbine blades manufactured using polymer composites reinforced by hybrid (carbon, basalt, glass fibers and strengthened by various nanopowders (oxides, carbides, borides are presented. The hybrid fiber-reinforced composites (HFRC were manufactured with prepreg technology by molding pre-saturated epoxy-strengthened matrix-reinforced fabric. Performance of the manufactured composites was estimated with values of the coefficient of operating condition (COC at a moderate and elevated temperature.

Hybrid carbon/glass fiber composites: Micromechanical analysis of structure–damage resistance relationships

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Dai, Gaoming

2014-01-01

A computational study of the effect of microstructure of hybrid carbon/glass fiber composites on their strength is presented. Unit cells with hundreds of randomly located and misaligned fibers of various properties and arrangements are subject to tensile and compression loading, and the evolution...... strength than pure composites, while the strength of hybrid composites under inform force loading increases steadily with increasing the volume content of carbon fibers....... of fiber damages is analyzed in numerical experiments. The effects of fiber clustering, matrix properties, nanoreinforcement, load sharing rules on the strength and damage resistance of composites are studied. It was observed that hybrid composites under uniform displacement loading might have lower...

The Rossendorf research site. The Rossendorf Research Center (FZR). The Rossendorf Verein fuer Kernverfahrenstechnik und Analytik (VKTA). The Rossendorf Foerderverein fuer Wissenschaft, Forschung und Technologie (ROTECH)

International Nuclear Information System (INIS)

1995-01-01

The illustrated brochure presents the Rossendorf research site at a glance. There are two major new establishments, the Rossendorf Research Center and the Verein fuer Kernverfahrenstechnik und Analytik Rossendorf (VKTA), whose main activities cover basic research and tasks in the field of nuclear facilities decommissioning and radwaste management on site. (DG) [de

Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf–aramid hybrid laminated composites

International Nuclear Information System (INIS)

Yahaya, R.; Sapuan, S.M.; Jawaid, M.; Leman, Z.; Zainudin, E.S.

2015-01-01

Highlights: • The mechanical properties of woven kenaf/Kevlar hybrid composites were analysed. • The layering sequences affect the mechanical properties of hybrid composites. • Treated kenaf improves the mechanical properties of hybrid composites. - Abstract: This work aims to evaluate the effect of layering sequence and chemical treatment on mechanical properties of woven kenaf–Kevlar composites. Woven kenaf–aramid hybrid laminated composites fabricated through hand lay-up techniques by arranging woven kenaf and Kevlar fabrics in different layering sequences and by using treated kenaf mat. To evaluate the effect of chemical treatment on hybrid composites, the woven kenaf mat was treated with 6% sodium hydroxide (NaOH) diluted solution and compared mechanical properties with untreated kenaf hybrid composites. Results shows that the tensile properties of hybrid composites improved in 3-layer composites compared to 4-layer composites. Hybrid composite with Kevlar as outer layers display a better mechanical properties as compared to other hybrid composites. Tensile and flexural properties of treated hybrid composites are better than non-treated hybrid composites. The fractured surface of hybrid composites was investigated by scanning electron microscopy. This study is a part of exploration of potential application of the hybrid composite in high velocity impact application

THE SYNERGISTIC EFFECT OF HYBRID FLAME RETARDANTS ON PYROLYSIS BEHAVIOUR OF HYBRID COMPOSITE MATERIALS

Directory of Open Access Journals (Sweden)

M. T. ALBDIRY

2012-06-01

Full Text Available The aim of this investigation is to comprehensively understand the polymeric composite behavior under direct fire sources. The synergistic effects of hybrid flame retardant material on inhabiting the pyrolysis of hybrid reinforced fibers, woven roving (0°- 45° carbon and kevlar (50/50 wt/wt, and an araldite resin composites were studied. The composites were synthesised and coated primarily by zinc borate (2ZnO.3B2O3.3.5H2O and modified by antimony trioxide (Sb2O3 with different amounts (10-30 wt% of flame retardant materials. In the experiments, the composite samples were exposed to a direct flame source generated by oxyacetylene flame (~3000ºC at variable exposure distances of 10-20 mm. The synergic flame retardants role of antimony trioxide and zinc borate on the composite surface noticeably improves the flame resistance of the composite which is attributed to forming a protective mass and heat barrier on the composite surface and increasing the melt viscosity.

Development of sugar palm yarn/glass fibre reinforced unsaturated polyester hybrid composites

Science.gov (United States)

Nurazzi, N. Mohd; Khalina, A.; Sapuan, S. Mohd; Rahmah, M.

2018-04-01

This study investigates the effect of fibre hybridization for sugar palm yarn fibre with glass fibre reinforced with unsaturated polyester composites. In this work, unsaturated polyester resin are reinforced with fibre at a ratio of 70:30 wt% and 60:40 wt%. The hybrid composites were characterized in terms of physical (density and water absorption), mechanical (tensile, flexural and compression) and thermal properties through thermal gravimetry analysis (TGA). Density determination showed that density increased with higher wt% of glass fibre. The inherently higher density of glass fibre increased the density of hybrid composite. Resistance to water absorption is improved upon the incorporation of glass fibre and the hybrid composites were found to reach equilibrium absorption at days 4 and 5. As for mechanical performance, the highest tensile strength, tensile modulus, flexural strength, flexural modulus and compression strength were obtained from 40 wt% of fibres reinforcement with ratio of 50:50 wt% of sugar palm yarn fibre and glass fibre reinforced unsaturated polyester composites. The increase of glass fibre loading had a synergistic effect on the mechanical properties to the composites structure due to its superior strength and modulus. The thermal stability of hybrid composites was improved by the increase of onset temperature and the reduction of residues upon increase in temperature.

Study on erosion behaviour of hybrid aluminium composite

Science.gov (United States)

Vishwas, D. K.; Chandrappa, C. N.; Venkatesh, Shreyas

2018-04-01

The origin of the light metals, as compared to other metals in this century, is noticeable and an exciting area of expansion for innovation. Light metals, are need of the day in engineering, among them application of aluminium and its alloys is enormous. we observe that these metals tend to have a progressive loss of metal from having contact surface with other metals. Erosion is one such wear process, where damage occurs by the repeated application of high localised stresses. Erosion due to impact of solid particle, is a significant problem. In the present work, the erosion behaviour of hybrid aluminium composite is studied. AL 6061 is used as the base alloy. AL 6061 alloy has excellent corrosion resistance but poor wear resistance. So, in order to have improved properties, it is reinforced with Tungsten Chromium Nickel powder in varied proportions by the method of stir casting. The results are compared with the as-cast Al-alloy to determine the improvement in mechanical properties. The tests were conducted in ASTM G76 setup, to determine solid particle erosion behaviour and the results of the hybrid composite were compared with that of as-cast AL 6061 alloy. It was evident that mass loss was maximum at 300 inclinations, which is a characteristic of ductile materials. It was observed that upon increasing the percentages of reinforcement (wt.%), the wear resistance of the hybrid composite increased significantly. It was also observed that the inclusion of tungsten-chromium-nickel powder increased the hardness of the hybrid composite significantly.

Diplomatie voor Wetenschap, Technologie en Innovatie. Een AWTI-achtergrondstudie naar de organisatie en resultaten van WTIdiplomatie in het Verenigd Koninkrijk en Zwitserland

NARCIS (Netherlands)

Goetheer, J.D.; Bakker, B.J.; Bijnsdorp, S.D.

2017-01-01

Op verzoek van de ministeries van Onderwijs, Cultuur en Wetenschap, Economische Zaken en Buitenlandse Zaken werkt de Adviesraad voor Wetenschap, Technologie en Innovatie (AWTI) aan een advies over hoe wetenschap, technologie en innovatie (WTI) en diplomatie elkaar beter kunnen ondersteunen en

Universelle Fernservice-Infrastruktur für eingebettete Systeme

OpenAIRE

Jazdi, Nasser

2003-01-01

Globalisierung ist ein Vorgang, durch den Märkte und Produktionen in verschiedenen Ländern immer mehr kooperieren, aber auch voneinander abhängig werden. Ursache hierfür ist die Dynamik des Handels mit Gütern und Dienstleistungen sowie die Bewegungen von Kapital und Technologie. Die Differenzierung erfolgt nicht mehr nur durch das Produkt selbst, sondern zunehmend durch dazugehörige Dienstleistungen, wie Wartung und Software-Updates. Die globale Bereitstellung solcher Dienstleistungen ist jed...

List of reports in the field of reactor safety research from BMFT, CEA, EPRI, JSTA and USNRC. Reported period: January 1 to June 30, 1994

International Nuclear Information System (INIS)

1994-01-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning single problems in the field of Reactor Safety Research. According to the cooperation of the Bundesministerium fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (ISTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these reports are available in the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Program of the BMFT, reporting organization. (orig./HP) [de

List of reports in the field of reactor safety research from BMFT, CEA, EPRI, JSTA and USNRC. Reported period: July 1 to December 31, 1993

International Nuclear Information System (INIS)

1993-01-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning single problems in the field of Reactor Safety Research. According to the cooperation of the Bundesministerium fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (ISTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these reports are available in the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Program of the BMFT, reporting organization. (orig./HP) [de

Mining in the Federal Republic of Germany 2012. Mining industries and statistics. 64th year 2013. Documentation; Der Bergbau in der Bundesrepublik Deutschland 2012. Bergwirtschaft und Statistik. 64. Jahrgang 2013. Dokumentation

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-11-15

The annual report of the series ''The mining industry in the Federal Republic of Germany - Mountain Economics and Statistics'' is published by the Federal Ministry of Economics and Technology in cooperation with the mining authorities of the federal states. It contains comprehensive data of all production facilities of mining industry in Germany and describes the position of the German industry in the context of the overall economic development. The report shows an interest in local raw materials as well as on the international raw materials economy. Moreover, the present publication provides a detailed statistics section. [German] Der Jahresbericht in der Reihe ''Der Bergbau in der Bundesrepublik Deutschland - Bergwirtschaft und Statistik'' wird vom Bundesministerium fuer Wirtschaft und Technologie in Zusammenarbeit mit den Bergbehoerden der Bundeslaender herausgegeben. Er enthaelt umfassende Daten aller Produktionsbetriebe des Bergbaus in Deutschland und beschreibt die Lage des deutschen Bergbaus im Zusammenhang mit der gesamtwirtschaftlichen Entwicklung. Der Bericht geht sowohl auf heimische Rohstoffe als auch auf die internationale Rohstoffwirtschaft ein. Darueber hinaus liefert die vorliegende Publikation einen ausfuehrlichen Statistikteil.

Synthèse: Revue des Sciences et de la Technologie

African Journals Online (AJOL)

Synthèse : Revue des Sciences et de la Technologie is a half-yearly international peer-reviewed journal published by the Diroctorate of Publication of “Université Badji Mokhtar- Annaba” (Algeria) since 1996. Synthèse is a multidisciplinary journal. Its scope covers the fields of pure and applied science, natural and life ...

Flexural Progressive Failure of Carbon/Glass Interlayer and Intralayer Hybrid Composites.

Science.gov (United States)

Wang, Qingtao; Wu, Weili; Gong, Zhili; Li, Wei

2018-04-17

The flexural progressive failure modes of carbon fiber and glass fiber (C/G) interlayer and intralayer hybrid composites were investigated in this work. Results showed that the bending failure modes for interlayer hybrid composites are determined by the layup structure. Besides, the bending failure is characterized by the compression failure of the upper layer, when carbon fiber tends to distribute in the upper layer, the interlayer hybrid composite fails early, the failure force is characterized by a multi-stage slightly fluctuating decline and the fracture area exhibits a diamond shape. While carbon fiber distributes in the middle or bottom layer, the failure time starts late, and the failure process exhibits one stage sharp force/stress drop, the fracture zone of glass fiber above the carbon layers presents an inverted trapezoid shape, while the fracture of glass fiber below the carbon layers exhibits an inverted triangular shape. With regards to the intralayer hybrid composites, the C/G hybrid ratio plays a dominating role in the bending failure which could be considered as the mixed failures of four structures. The bending failure of intralayer hybrid composites occurs in advance since carbon fiber are located in each layer; the failure process shows a multi-stage fluctuating decline, and the decline slows down as carbon fiber content increases, and the fracture sound release has the characteristics of a low intensity and high frequency for a long time. By contrast, as glass fiber content increases, the bending failure of intralayer composites is featured with a multi-stage cliff decline with a high amplitude and low frequency for a short-time fracture sound release.

Evaluation of Impact Strength of Epoxy Based Hybrid Composites Reinforced with E-Glass/Kevlar 49

OpenAIRE

Jogi , Subhan Ali; Moazam Baloch , Muhammad; Chandio , Ali ,; Memon , Iftikhar Ahmed; Chandio , Ghulaqm Sarwar

2017-01-01

International audience; In hybridization different fibers are stacked layer by layer to produce laminates have specific strength and stiffness and employed in light weight high strength applications. Physically mean fabricated hybrid composites used in aerospace, under water, body armors and armed forces establishment. In present work drop-weight impact response of hybrid composites were investigated by making laminates of hybrid composites. In Hybridization layers of E-glass (roving) and Kev...

Technology images and concepts of technology in transition. An analysis in the philosophy of technology and general technology; Technikbilder und Technikkonzepte im Wandel. Eine technikphilosophische und allgemeintechnische Analyse

Energy Technology Data Exchange (ETDEWEB)

Banse, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (DE). Inst. fuer Technikfolgen-Abschaetzung und Systemanalyse (ITAS); Meier, B. [Potsdam Univ. (Germany). Inst. fuer Arbeitslehre/Technik; Wolffgramm, H. (eds.)

2002-02-01

abgeleitet. Dazu wird vor allem auf den Zusammenhang von Zielen, Inhalten und fachspezifischen Methoden fokussiert. Einen Schwerpunkt, um die Kompetenzen im Bereich von Technik und Technologie eines jeden allgemeingebildeten Individiuums bestimmen zu koennen, nehmen die typischen Denk- und Arbeitsweisen der Technik und der Technikwissenschaften ein. (orig.)

Rezension von: Waltraud Ernst, Ilona Horwath (Eds.: Gender in Science and Technology. Interdisciplinary Approaches. Bielefeld: transcript Verlag 2013.

Directory of Open Access Journals (Sweden)

Diana Schellenberg

2014-12-01

Full Text Available Mit einer wahrlich trans- und interdisziplinären Sammlung an Artikeln werden im vorliegenden Buch feministische Kritiken und Methoden vorgestellt, die sich auf die Voraussetzungen und Abläufe technologischer Prozesse beziehen. Es wird deutlich, wie geschlechtsbezogene und andere Diskriminierungsformen in die technische Wissensbildung und -vermittlung, in Design- und Produktentwicklungsprozesse sowie in den Konsum und die Nutzung von Technologie eingeschrieben werden. Bedauerlicherweise werden intersektionale Faktoren und queere Identitäten teilweise unzureichend thematisiert. Ein besonders interessanter Aspekt des Buches ist die Konzentration auf Ansätze, die sich auf situiertes Wissen und Handlungsstrategien beziehen und sich lose dem sogenannten New Materialism zuordnen lassen.

Evaluation, testing and further development of PV systems in Indonesia. Final report; Evaluation, Erprobung und Weiterentwicklung von PV-Systemen in Indonesien. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Preiser, K.; Schweizer-Ries, P.; Kuhmann, J.; Adib, R.

2000-06-01

The Indonesian government initiated the World's biggest decentralised rural electrification programme with PV systems, the so-called 50 MW PV programme, which is to provide 10 million households with PV systems within the next decade. The report describes the financing, distribution strategies, organisation of maintenance work, and training. The focus will be on locally produced components, with cooperation of German organisations. [German] Indonesien besteht aus mehr als 17.500 Inseln, so dass die Ausdehnung der nationalen Netze auf verschiedene Barrieren stoesst. Dort gibt es ungefaehr 23 Millionen Haushalte, die nicht an das nationale Stromnetz angeschlossen sind. Um diese zu ueberwinden, hat die indonesische Regierung das weltweit groesste dezentrale rurale Elektrifizierungsprogramm mit Photovoltaik, das sogenannte 50 MW PV-Programm, ins Leben gerufen. Im Rahmen dieses Programmes sollen in den naechsten zehn Jahren eine Million Haushalte mit Photovoltaik versorgt werden. Welchen Einfluss dabei nicht-technische Aspekte, wie Finanzierungssysteme, Verbreitungsstrategien, Organisation von Wartungsarbeiten, Ausbildung der Programmakteure auf die Zufriedenheit der Nutzer mit den gelieferten Energiedienstleistungen hat und wie diese eine dauerhaften Betrieb und eine nachhaltige Verbreitung dieser Technologie foerdern koennen, war Gegenstand detaillierter Untersuchungen. Grossen Wert legten wir auf Tests lokal produzierter Komponenten und Systeme, mit dem Ziel den beteiligten Firmen die Verbesserung der Qualitaet ihrer Produkte und Dienstleistungen zu ermoeglichen. Neben verschiedenen Projekterfolgen ist sicherlich erwaehnenswert, dass initiiert durch unsere Taetigkeiten, ein deutscher Ladereglerhersteller die Produktion seiner Regler in Zusammenarbeit mit einer indonesischen Firma ausweiten konnte. (orig.)

Hybrid nanocellulose/nanoclay composites for food packaging applications

DEFF Research Database (Denmark)

Trifol Guzman, Jon

™ 30B) were prepared and evaluated for use in food packaging. It was determined that composites with CNF or CNC and clay led to a great reduction in the oxygen transmission rate (OTR)and the water vapour transmission rate (WVTR) (up to a 90% reduction in the OTR and 76% in theWVTR for PLA/CNF 5%/C30B 5...... to larger spherulite sizes, which had a more significant impacton water diffusion and transparency reduction but also showed an increased water sorption. Finally, it was found that cellulose nanofibers reduced water diffusion to an extent similar to C30B (21% vs.27%), while hybrid composites showed 49......% decrease, albeit CNF based composites showed increased water sorption (7% for PLA/CNF 1% composite and 9% for PLA/CNF 1%/C30B 1% when compared with neat PLA).The reduced diffusivity of the hybrid nanocomposites suggested that the material was promising for active packaging, since low diffusivity leads...

Hybrid Nano composite Membranes for PEMFC Applications

International Nuclear Information System (INIS)

Niepceron, F.

2008-03-01

This work aims at validating a new concept of hybrid materials for the realization of proton exchange membranes, an essential constituent of PEM fuel cells. The originality of this nano-composite hybrid concept corresponds to a separation of the membrane's properties. We investigated the preparation of composite materials based on an inert, relatively low cost, polymer matrix (PVDF-HFP) providing the mechanical stability embedding inorganic fillers providing the necessary properties o f proton-conduction and water retention. The first step of this work consisted in the modification of fumed silica to obtain a proton-conducting filler. An ionic exchange capacity (CEI) equal to 3 meq/g was obtained by the original grafting of sodium poly(styrene-sulfonate) chains from the surface of particles. Nano-composite hybrid membranes PVDF-HFP/functionalized silica were accomplished by a film casting process. The coupling of the morphological and physicochemical analyses validated the percolation of the inorganic phase for 30 wt.% of particles. Beyond 40 % of loading, measured protonic conductivity is higher than the reference membrane Nafion 112. Finally, these membranes presented high performances, above 0.8 W/cm 2 , in single-cell fuel cell tests. A compromise is necessary according to the rate of loading between performances in fuel cell and mechanical properties of the membrane. 50 % appeared as best choice with, until 90 C, a remarkable thermal stability of the performances. (author)

Experimental investigation of cyclic hygrothermal aging of hybrid composite

KAUST Repository

El Yagoubi, Jalal

2013-04-05

This work provides an experimental investigation of the cyclic hygrothermal aging of a hybrid composites. We aimed to propose a general framework in the view to further optimize polymer-based composites. It reports experimental data and relevant observations collected during an aging campaign (up to 2000 cycles) where anhydride-cured epoxy samples as well as composites samples are exposed to environmental conditions. The data gathered during the whole campaign reveals that (1) the polymer displays a non-classical sorption behavior (2) the volume change is correlated to the mass uptake (3) the elastic modulus is correlated to the glass transition temperature. Matrix and interface degradation of the hybrid composite is monitored by means of microstructural observations. © 2013 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Experimental investigation of cyclic hygrothermal aging of hybrid composite

KAUST Repository

El Yagoubi, Jalal; Lubineau, Gilles; Saghir, Shahid; Selvakumaran, Lakshmi; Askari, Abe H.; Brown, Arlene M.

2013-01-01

This work provides an experimental investigation of the cyclic hygrothermal aging of a hybrid composites. We aimed to propose a general framework in the view to further optimize polymer-based composites. It reports experimental data and relevant observations collected during an aging campaign (up to 2000 cycles) where anhydride-cured epoxy samples as well as composites samples are exposed to environmental conditions. The data gathered during the whole campaign reveals that (1) the polymer displays a non-classical sorption behavior (2) the volume change is correlated to the mass uptake (3) the elastic modulus is correlated to the glass transition temperature. Matrix and interface degradation of the hybrid composite is monitored by means of microstructural observations. © 2013 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Free vibration response of a multilayer smart hybrid composite plate with embedded SMA wires

Directory of Open Access Journals (Sweden)

K. Malekzadeh

Full Text Available In this paper, free vibration response of a hybrid composite plate was studied. Effects of some geometrical, physical and material parameters on response of the composite plates embedded with shape memory alloy (SMA wires were investigated, which have not been reported in the literature thus far. Some of these parameters included important factors affecting free vibration response of the smart hybrid composite plates. The SMA wires were embedded within the layers of the composite laminate. First-order shear deformation theory (FSDT was utilized to obtain the governing equations of hybrid composite plates. Transverse shear and rotary inertia effects of the plate were taken into consideration. For simply-supported boundary conditions, systematic closed form solutions were obtained by Navier's technique. It was established that dynamic behavior of the smart hybrid composite plate depended on various parameters such as volume fraction, temperature dependent recovery stress and tensile pre-strain of SMA wires and aspect ratio of the laminated hybrid plate.

Hybrid Fiber Layup and Fiber-Reinforced Polymeric Composites Produced Therefrom

Science.gov (United States)

Barnell, Thomas J. (Inventor); Garrigan, Sean P. (Inventor); Rauscher, Michael D. (Inventor); Dietsch, Benjamin A. (Inventor); Cupp, Gary N. (Inventor)

2018-01-01

Embodiments of a hybrid fiber layup used to form a fiber-reinforced polymeric composite, and a fiber-reinforced polymeric composite produced therefrom are disclosed. The hybrid fiber layup comprises one or more dry fiber strips and one or more prepreg fiber strips arranged side by side within each layer, wherein the prepreg fiber strips comprise fiber material impregnated with polymer resin and the dry fiber strips comprise fiber material without impregnated polymer resin.

Novel hybrid coatings with controlled wettability by composite nanoparticle aggregation

Energy Technology Data Exchange (ETDEWEB)

Hritcu, Doina, E-mail: dhritcu@ch.tuiasi.ro; Dodi, Gianina; Iordache, Mirabela L.; Draganescu, Dan; Sava, Elena; Popa, Marcel I.

2016-11-30

Highlights: • Magnetite-grafted chitosan composite nanoparticles were synthesized. • The particles are able to assemble under the influence of a silane derivative. • Thin films containing composites, chitosan and hydrolyzed silane were optimized. • The novel hybrid coatings show hierarchical roughness and high wetting angle. - Abstract: The aim of this study is to evaluate novel hybrid materials as potential candidates for producing coatings with hierarchical roughness and controlled wetting behaviour. Magnetite (Fe{sub 3}O{sub 4}) nanoparticles obtained by co-precipitation were embedded in matrices synthesized by radical graft co-polymerization of butyl acrylate (BA), butyl methacrylate (BMA), hexyl acrylate (HA) or styrene (ST) with ethylene glycol di-methacrylate (EGDMA) onto previously modified chitosan bearing surface vinyl groups. The resulting composite particles were characterized regarding their average size, composition and magnetic properties. Hybrid thin films containing suspension of composite particles in ethanol and pre-hydrolysed hexadecyltrimethoxysilane (HDTS) as a coupling/crosslinking agent were deposited by spin coating or spraying. The films were cured by heating and subsequently characterized regarding their morphology (scanning electron microscopy), contact angle with water and adhesion to substrate (scratch test). The structure-property relationship is discussed.

Polylactide-based renewable green composites from agricultural residues and their hybrids.

Science.gov (United States)

Nyambo, Calistor; Mohanty, Amar K; Misra, Manjusri

2010-06-14

Agricultural natural fibers like jute, kenaf, sisal, flax, and industrial hemp have been extensively studied in green composites. The continuous supply of biofibers in high volumes to automotive part makers has raised concerns. Because extrusion followed by injection molding drastically reduces the aspect ratio of biofibers, the mechanical performance of injection molded agricultural residue and agricultural fiber-based composites are comparable. Here, the use of inexpensive agricultural residues and their hybrids that are 8-10 times cheaper than agricultural fibers is demonstrated to be a better way of getting sustainable materials with better performance. Green renewable composites from polylactide (PLA), agricultural residues (wheat straw, corn stover, soy stalks, and their hybrids) were successfully prepared through twin-screw extrusion, followed by injection molding. The effect on mechanical properties of varying the wheat straw amount from 10 to 40 wt % in PLA-wheat straw composites was studied. Tensile moduli were compared with theoretical calculations from the rule of mixture (ROM). Combination of agricultural residues as hybrids is proved to reduce the supply chain concerns for injection molded green composites. Densities of the green composites were found to be lower than those of conventional glass fiber composites.

Cast Hybrid Composites Designated for Air Compressor Pistons

Directory of Open Access Journals (Sweden)

Dolata A. J.

2016-06-01

Full Text Available The main purpose of the investigations was to develop the phase composition of the composite assuming that the component selection criterion will be the formability of piston work surfaces during the machining. Wear resistance under the friction conditions was assumed as the additional parameter for the assessment of composite material. In the study were used AlSi7Mg/SiC+Cg and AlSi7Mg/SiC+GR hybrid composites prepared by the stir casting method.

Piezoelectric properties of the new generation active matrix hybrid (micro-nano) composites

Energy Technology Data Exchange (ETDEWEB)

Parali, Levent, E-mail: levent.parali@cbu.edu.tr [Department of Electronics and Automation, Celal Bayar University, Manisa (Turkey); Şabikoğlu, İsrafil [Department of Physics, Celal Bayar University, Manisa (Turkey); Kurbanov, Mirza A. [Institute of Physics, Academy of Sciences of Azerbaijan, Baku (Azerbaijan)

2014-11-01

Highlights: • We prepared hybrid structured piezocomposites. • We examine thermostimulated depolarization of piezocomposites. • We examine frequency characteristic of piezocomposites with SiO{sub 2} and BaTiO{sub 3}. • The piezocomposites can be used in acoustic applications at 5 Hz–40 kHz. - Abstract: A hybrid piezoelectric composite structure is obtained by addition of nano-sized BaTiO{sub 3}, SiO{sub 2} to the micro-sized PZT and polymers composition. Although the PZT material itself has excellent piezoelectric properties, PZT-based composite variety is limited. Piezoelectric properties of PZT materials can be varied with an acceptor or a donor added to the material. In addition, varieties of PZT-based sensors can be increased with doping polymers which have physical-mechanical, electrophysical, thermophysical and photoelectrical properties. The active matrix hybrid structure occurs when bringing together the unique piezoelectric properties of micro-sized PZT with electron trapping properties of nano-sized insulators (BaTiO{sub 3} or SiO{sub 2}), and their piezoelectric, mechanic and electromechanic properties significantly change. In this study, the relationship between the piezoelectric constant and the coupling factor values of microstructure (PZT–PVDF) and the hybrid structure (PZT–PVDF–BaTiO{sub 3}) composite are compared. The d{sub 33} value and the coupling factor of the hybrid structure have shown an average of 54 and 62% increase according to microstructure composite, respectively. In addition, the d{sub 33} value and the coupling factor of the hybrid structure (PZT–HDPE–SiO{sub 2}) have exhibited about 68 and 52% increase according to microstructure composite (PZT–HDPE), respectively.

Synthesis of a hybrid MIL-101(Cr)/ZTC composite for hydrogen storage applications

CSIR Research Space (South Africa)

Musyoka, Nicholas M

2016-06-01

Full Text Available Metal–organic frameworks (MOFs) hybrid composites have recently attracted considerable attention in hydrogen storage applications. In this study a hybrid composite of zeolite templated carbon (ZTC) and Cr-based MOF (MIL-101) was synthesised...

Control and load management of a fuel cell based hybrid system; Steuerung und Lademanagement eines brennstoffzellen-basierten Hybridsystems

Energy Technology Data Exchange (ETDEWEB)

Klausmann, Andreas

2011-07-01

Objective of this work is the development of a control for a hybrid electric power train. Initial point is an electric drive powered by a rechargeable battery. This battery shall be recharged during operation by a methanol-driven fuel cell. At this point it is not intended to deploy a direct methanol fuel cell but a combination of a methanol reformer generating hydrogen-rich gas and a high-temperature fuel cell (HTPEM-FC). This work covers the general strategy of operation like load cycles, standby phases etc., the reformer control and the fuel cell operation with a newly developed charge concept. While the basic research is done on a rapid prototyping system this work aims on porting the control system to an embedded platform. Here emphasis is put on the hardware independency of the control. The development of the reformer control contains the strategy for heating up the system with a minimum of electrical energy consumption, since this energy has to be supplied from the battery during the system start-up, increasing the minimum charge level of the battery required for an autarkic recharge. Unlike in common systems the reformer will be modulated according to the electric load and not vice versa, though the fuel cell serves as load sensor. Beside start-up and shutdown strategies the fuel cell control covers particularly the charge control. The electric load is assumed to be unknown, non-influenceable and unsteady. The charge control handles the charging of the battery under optimal utilization of the available hydrogen while avoiding an overload of the fuel cell caused by sudden load changes like powering up the drive. Therefore the common step-down circuit will be advanced so that all huge and heavy electronic components can be minimized or substituted by internal effects of battery and fuel cell. The fuel utilization will be feed back to the reformer control. After coupling of reformer and fuel cell control the system will be ported to an embedded control system

Hybrid carbon-glass fiber/toughened epoxy thick composites subject to drop-weight and ballistic impacts

Science.gov (United States)

Sevkat, Ercan

The goals of this study are to investigate the low velocity and ballistic impact response of thick-section hybrid fiber composites at room temperature. Plain-woven S2-Glass and IM7 Graphite fabrics are chosen as fiber materials reinforcing the SC-79 epoxy. Four different types of composites consisting of alternating layers of glass and graphite woven fabric sheets are considered. Tensile tests are conducted using 98 KN (22 kip) MTS testing machine equipped with environmental chamber. Low-velocity impact tests are conducted using an Instron-Dynatup 8250 impact test machine equipped with an environmental chamber. Ballistic impact tests are performed using helium pressured high-speed gas-gun. Tensile tests results were used to define the material behavior of the hybrid and non-hybrid composites in Finite Element modeling. The low velocity and ballistic impact tests showed that hybrid composites performance was somewhere between non-hybrid woven composites. Using woven glass fabrics as outer skin improved the impact performance of woven graphite composite. However hybrid composites are prone to delamination especially between dissimilar layers. The ballistic limit velocity V50 hybrid composites were higher that of woven graphite composite and lower than that of woven glass composite. Both destructive cross-sectional micrographs and nondestructive ultrasonic techniques are used to evaluate the damage created by impact. The Finite Element code LS-DYNA is chosen to perform numerical simulations of low velocity and ballistic impact on thick-section hybrid composites. The damage progression in these composites shows anisotropic nonlinearity. The material model to describe this behavior is not available in LS-DYNA material library. Initially, linear orthotropic material with damage (Chan-Chan Model) is employed to simulate some of the experimental results. Then, user-defined material subroutine is incorporated into LS-DYNA to simulate the nonlinear behavior. The

Risiko Video- und Computerspiele? Eine Studie über Video- und Computerspielnutzung und Aggression bei 12- und 16- jährigen Jugendlichen

OpenAIRE

Schiller, Eva-Maria; Strohmeier, Dagmar; Spiel, Christiane

2009-01-01

Video -und Computerspielen ist heutzutage eine beliebte Freizeitaktivität von Kindern und Jugendlichen, besonders von Jungen. Trotz der großen Vielfalt der angebotenen Video- und Computerspiele für Kinder und Jugendliche, konzentriert sich die Forschung vorwiegend auf negative Einflüsse von gewalthaltigen Video- und Computerspielen. Da nicht alle Kinder und Jugendliche ausschließlich gewalthaltige Video- und Computerspiele spielen, betrachten wir diesen Fokus in der Wissenschaft als zu eng ge...

Restoration in a mining and metallurgical industries area as a model project. Subproject 1: Factory for amalgamation Halsbruecke. Final report; Modellhafte Sanierung in einer Region mit Bergbau- und Huettenindustrie. Teilvorhaben 1: Amalgamierwerk Halsbruecke, Land Sachsen. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Cichos, C.; Menzer, V.; Schaal, A.

1993-06-01

Technology development for the restoration of a metallurgical site contaminated by heavy metals (Pb, Zn, Cu, Hg, As) with the aims of far-reaching recycling as well as minimizing of residues and demonstration of this technology contains in a first step - detailed historical exploration; - chemical, physical and mineralogical materials analysis; - bench scale investigations for process engineering. Starting from historical appraisal and geogene/anthropogene conditions the methods of material characterization bring statements on processing of noxious materials (metallurgical), harmless dumping abilities (immobilization, stabilization) and technological process stages (particularly wet mechanical processes). The same methodology is useful for analogous mining, metallurgical and used material sites with contamination by heavy metals and consisting of heterogeneous materials. (orig.) [Deutsch] Die modellhafte Technologieentwicklung und die Demonstration dieser Technologie zur Sanierung eines durch Schwermetalle (Pb, Zn, Cu, Cd, Hg, As) komplex belasteten Huettenstandortes unter dem Aspekt einer weitgehenden Reststoffverwertung sowie Minimierung der zu entsorgenden Rueckstaende umfasst in der ersten Phase - eine detaillierte historische Analyse/Erkundung; - eine chemische, physikalische und mineralogische Stoffcharakterisierung; verfahrenstechnische Untersuchungen im Labormassstab. Ausgehend von der historischen Bewertung und der geogenen/anthropogenen Verhaeltnisse fuehren die Methoden der Stoffcharakterisierung zu Aussagen der Schadstoffweiterverarbeitung (metallurgisch) sowie der gefahrlosen Deponierung (Immobilisierung, Stabilisierung) und zu technologischen Verfahrensschritten (bes. nassmechanische Verfahren). Die Herangehensweise ist fuer analoge Bergbau- aber besonders Huettenstandorte ggf. auch fuer andere Altlastenstandorte mit komplexer Schwermetallkontamination und heterogenem Material relevant. (orig.)

Hybrid and hierarchical composite materials

CERN Document Server

Kim, Chang-Soo; Sano, Tomoko

2015-01-01

This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous  and detailed examples and over 150 illustrations.   In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.

Carbon nanotube reinforced hybrid composites: Computational modeling of environmental fatigue and usability for wind blades

DEFF Research Database (Denmark)

Dai, Gaoming; Mishnaevsky, Leon

2015-01-01

The potential of advanced carbon/glass hybrid reinforced composites with secondary carbon nanotube reinforcement for wind energy applications is investigated here with the use of computational experiments. Fatigue behavior of hybrid as well as glass and carbon fiber reinforced composites...... with the secondary CNT reinforcements (especially, aligned tubes) present superior fatigue performances than those without reinforcements, also under combined environmental and cyclic mechanical loading. This effect is stronger for carbon composites, than for hybrid and glass composites....

Two-year clinical comparison of a flowable-type nano-hybrid composite and a paste-type composite in posterior restoration.

Science.gov (United States)

Hirata-Tsuchiya, Shizu; Yoshii, Shinji; Ichimaru-Suematsu, Miki; Washio, Ayako; Saito, Noriko; Urata, Mariko; Hanada, Kaori; Morotomi, Takahiko; Kitamura, Chiaki

2017-08-01

The purpose of the present study was to compare the clinical efficacy between a flowable-type nano-hybrid composite and a paste-type composite for posterior restoration. Of 62 posterior teeth in 33 patients (mean age: 34.1 years), 31 were filled with a paste-type composite (Heliomolar [HM] group), and another 31 with a flowable nano-hybrid composite (MI FIL [MI] group). Clinical efficacy was evaluated at 2 years after the restoration. There were no differences for retention, surface texture deterioration, anatomical form change, deterioration of marginal adaptation, and secondary caries, while a statistical difference was found for marginal discoloration, which was significantly greater in the HM group (P < 0.05). Furthermore, color matching in the MI group was superior to that in the HM group immediately after the restoration throughout the study period. The present 2-year clinical evaluation of different composites showed that the flowable nano-hybrid composite could be an effective esthetic material for posterior restoration. © 2016 John Wiley & Sons Australia, Ltd.

Characterization of hybrid aluminum matrix composites for advanced applications – A review

Directory of Open Access Journals (Sweden)

Jaswinder Singh

2016-04-01

Full Text Available Hybrid aluminum matrix composites (HAMCs are the second generation of composites that have potential to substitute single reinforced composites due to improved properties. This paper investigates the feasibility and viability of developing low cost-high performance hybrid composites for automotive and aerospace applications. Further, the fabrication characteristics and mechanical behavior of HAMCs fabricated by stir casting route have also been reviewed. The optical micrographs of the HAMCs indicate that the reinforcing particles are fairly distributed in the matrix alloy and the porosity levels have been found to be acceptable for the casted composites. The density, hardness, tensile behavior and fracture toughness of these composites have been found to be either comparable or superior to the ceramic reinforced composites. It has been observed from the literature that the direct strengthening of composites occurs due to the presence of hard ceramic phase, while the indirect strengthening arises from the thermal mismatch between the matrix alloy and reinforcing phase during solidification. Based on the database for material properties, the application area of HAMCs has been proposed in the present review. It has been concluded that the hybrid composites offer more flexibility and reliability in the design of possible components depending upon the reinforcement's combination and composition.

Experimental Investigation on Mechanical Properties of Hemp/E-Glass Fabric Reinforced Polyester Hybrid Composites

Directory of Open Access Journals (Sweden)

M R SANJAY

2016-09-01

Full Text Available This research work has been focusing on Hemp fibers has an alternative reinforcement for fiber reinforced polymer composites due to its eco-friendly and biodegradable characteristics. This work has been carried out to evaluate the mechanical properties of hemp/E-glass fabrics reinforced polyester hybrid composites. Vacuum bagging method was used for the preparation of six different kinds of hemp/glass fabrics reinforced polyester composite laminates as per layering sequences. The tensile, flexural, impact and water absorption tests of these hybrid composites were carried out experimentally according to ASTM standards. It reveals that an addition of E-glass fabrics with hemp fabrics can increase the mechanical properties of composites and decrease the water absorption of the hybrid composites.

Processing and characterisation of novel metal-reinforced Al{sub 2}O{sub 3}-composites; Herstellung und Charakterisierung neuartiger metallverstaerkter Al{sub 2}O{sub 3}-Verbundwerkstoffe

Energy Technology Data Exchange (ETDEWEB)

Guenther, R. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung

1999-07-01

Using a new processing route, Al{sub 2}O{sub 3}-based ceramic composites have been prepared, that consist of 3-d networks of the ceramic and different metallic phases. The damage tolerance of these composites could be significantly improved over monolithic Al{sub 2}O{sub 3}: fracture strength and fracture toughness were increased by a factor of 4 up to 1393 MPa and 11.8 MPa {radical}(m), respectively. Similarly, resistance against abrasive wear was successfully improved by a factor of two over monolithic Al{sub 2}O{sub 3}. In combination with the good electrical and thermal conductivity, these superior mechanical properties are of great interest for automotive and biomedical industries. (orig.) [German] Mit einem neu entwickelten Verfahren werden keramische Al{sub 2}O{sub 3}-Verbundwerkstoffe hergestellt, die sich durch eine dreidimensionale Vernetzung der (inter)metallischen und der keramischen Phase auszeichnen. Die Schadenstoleranz derartiger Verbundwerkstoffe konnte im Vergleich zu monolithischer Al{sub 2}O{sub 3}-Keramik deutlich gesteigert werden: Die Bruchfestigkeit und die Bruchzaehigkeit wurden jeweils um einen Faktor 4 auf 1393 MPa bzw. 11,8 MPa {radical}(m) erhoeht, die Abriebfestigkeit um einen Faktor 2 verbessert. In Kombination mit der elektrischen und thermischen Leitfaehigkeit sind diese aussergewoehnlichen mechanischen Eigenschaften in Automobilbau und in der Medizintechnik von grossem Interesse. (orig.)

Components and systems for hybrid- and electromobiles; Komponenten und Systeme fuer Hybrid- und Elektrofahrzeuge

Energy Technology Data Exchange (ETDEWEB)

Immle, Michael; Burgmayr, Thomas [Panasonic Electric Works Europe AG, Holzkirchen (Germany)

2010-07-01

On the Hybrid and Electric Vehicle sector Panasonic Electric Works is working among others on electro-mechanical products, such as contactors for battery disconnection or battery charging, on semi-conductor relays for battery monitoring and on complex systems as battery disconnect units. This paper will show experience on the hybrid vehicle sector. Further on different switching components and their usage will be introduced. As a main topic battery disconnected units will be discussed. Based on an actual example basic development items and system features will be touched and important development stages will be shown. As a general topic a future view on vehicles and batteries, as well as on charging systems and infrastructural necessities will be introduced. (orig.)

Hybrid filler composition optimization for tensile strength of jute fibre

Indian Academy of Sciences (India)

https://www.ias.ac.in/article/fulltext/boms/039/05/1223-1231 ... The developed composite consists of natural jute fibre as reinforcement and unsaturated ... The effect of weight content of bagasse fibre, carbon black and calcium carbonate ... of pultruded jute fibre polymer composite at the optimum composition of hybrid filler.

Flexural behavior of the fibrous cementitious composites (FCC) containing hybrid fibres

Science.gov (United States)

Ramli, Mahyuddin; Ban, Cheah Chee; Samsudin, Muhamad Fadli

2018-02-01

In this study, the flexural behavior of the fibrous cementitious composites containing hybrid fibers was investigated. Waste materials or by product materials such as pulverized fuel ash (PFA) and ground granulated blast-furnace slag (GGBS) was used as supplementary cement replacement. In addition, barchip and kenaf fiber will be used as additional materials for enhance the flexural behavior of cementitious composites. A seven mix design of fibrous cementitious composites containing hybrid fiber mortar were fabricated with PFA-GGBS as cement replacement at 50% with hybridization of barchip and kenaf fiber between 0.5% and 2.0% by total volume weight. The FCC with hybrid fibers mortar will be fabricated by using 50 × 50 × 50 mm, 40 × 40 × 160 mm and 350 × 125 × 30 mm steel mold for assessment of mechanical performances and flexural behavior characteristics. The flexural behavior and mechanical performance of the PFA-GGBS with hybrid fiber mortar block was assessed in terms of load deflection response, stress-strain response, crack development, compressive and flexural strength after water curing for 28 days. Moreover, the specimen HBK 1 and HBK 2 was observed equivalent or better in mechanical performance and flexural behavior as compared to control mortar.

Hybrid fiber reinforcement and crack formation in Cementitious Composite Materials

DEFF Research Database (Denmark)

Pereira, E.B.; Fischer, Gregor; Barros, J.A.O.

2011-01-01

reinforcement systems. The research described in this paper shows that the multi-scale conception of cracking and the use of hybrid fiber reinforcements do not necessarily result in an improved tensile behavior of the composite. Particular material design requirements may nevertheless justify the use of hybrid......- to the macroscale. In this study, the performance of different fiber reinforced cementitious composites is assessed in terms of their tensile stress-crack opening behavior. The results obtained from this investigation allow a direct quantitative comparison of the behavior obtained from the different fiber...

Frequency and deflection analysis of cenosphere/glass fiber interply hybrid composite cantilever beam

Science.gov (United States)

Bharath, J.; Joladarashi, Sharnappa; Biradar, Srikumar; Kumar, P. Naveen

2018-04-01

Interply hybrid laminates contain plies made of two or more different composite systems. Hybrid composites have unique features that can be used to meet specified design requirements in a more cost-effective way than nonhybrid composites. They offer many advantages over conventional composites including balanced strength and stiffness, enhanced bending and membrane mechanical properties, balanced thermal distortion stability, improved fatigue/impact resistance, improved fracture toughness and crack arresting properties, reduced weight and cost. In this paper an interply hybrid laminate composite containing Cenosphere reinforced polymer composite core and glass fiber reinforced polymer composite skin is analysied and effect of volume fraction of filler on frequency and load v/s deflection of hybrid composite are studied. Cenosphere reinforced polymer composite has increased specific strength, specific stiffness, specific density, savings in cost and weight. Glass fiber reinforced polymer composite has higher torsional rigidity when compared to metals. These laminate composites are fabricated to meet several structural applications and hence there is a need to study their vibration and deflection properties. Experimental investigation starts with fabrication of interply hybrid composite with cores of cenosphere reinforced epoxy composite volume fractions of CE 15, CE 25, CE15_UC as per ASTM E756-05C, and glasss fiber reinforced epoxy skin, cast product of required dimension by selecting glass fibre of proper thickness which is currently 0.25mm E-glass bidirectional woven glass fabric having density 2500kg/m3, in standard from cast parts of size 230mmX230mmX5mm in an Aluminum mould. Modal analysis of cantilever beam is performed to study the variation of natural frequency with strain gauge and the commercially available Lab-VIEW software and deflection in each of the cases by optical Laser Displacement Measurement Sensor to perform Load versus Deflection Analysis

Effect of Environmental Degradation on Mechanical Properties of Kenaf/Polyethylene Terephthalate Fiber Reinforced Polyoxymethylene Hybrid Composite

Directory of Open Access Journals (Sweden)

Mohamad Zaki Abdullah

2013-01-01

Full Text Available The main objective of this research is to investigate the effect of environmental degradation on the mechanical properties of kenaf/PET fiber reinforced POM hybrid composite. Kenaf and PET fibers were selected as reinforcements because of their good mechanical properties and resistance to photodegradation. The test samples were produced by compression molding. The samples were exposed to moisture, water spray, and ultraviolet penetration in an accelerated weathering chamber for 672 hours. The tensile strength of the long fiber POM/kenaf (80/20 composite dropped by 50% from 127.8 to 64.8 MPa while that of the hybrid composite dropped by only 2% from 73.8 to 72.5 MPa. This suggests that the hybrid composite had higher resistance to tensile strength than the POM/kenaf composite. Similarly, the results of flexural and impact strengths also revealed that the hybrid composite showed less degradation compared to the kenaf fiber composite. The results of the investigation revealed that the hybrid composite had better retention of mechanical properties than that of the kenaf fiber composites and may be suitable for outdoor application in the automotive industry.

Solarstrom rund um die Uhr: Solarstrom mit Organic Rankine Cycle / erhöhte Solarausbeute / Fraunhofer UMSICHT

OpenAIRE

Schmidt, Mirjam; Hunstock, Björn; Bülten, Björn

2013-01-01

In einem Gastbeitrag beschäftigen sich die beiden Diplom-Ingenieure Björn Hunstock und Björn Bülten - beide wissenschaftliche Mitarbeiter des Fraunhofer-Instituts für Umwelt-, Sicherheits- und Energietechnik UMSICHT - mit solarthermisch angetriebenen Kraftwerken auf Basis der Organic Rankine Cycle (ORC) Technologie. Sie erläutern, in welchen Fällen und aus welchen Gründen diese als Alternative zu Photovoltaik-Anlagen in Betracht gezogen werden sollten. Sie wagen einen Vergleich der beiden Te...

Untersuchungen zur fließregulierenden Eigenschaft hochdisperser Fällungskieselsäuren

OpenAIRE

Müller, Anne-Kathrin

2008-01-01

Es wurde untersucht, welchen Einfluss verschiedene hochdisperse Fließregulierungsmittel, wie sie bisher in der pharmazeutischen Technologie aber auch in der Lebensmittel- und Futtermittelindustrie eingesetzt werden, auf einige ausgewählte kohäsive Schüttgüter ausüben. Dazu wurden binäre Mischungen mit variierender Konzentration an Fließregulierungsmittel und Schüttgut hergestellt und in einem Freifallmischer gemischt. Als Fließverbesserer kamen verschiedene hochdisperse Kieselsäuren, darunter...

Qualität beim E-Learning: Der Lernende als Grundkategorie bei der Qualitätssicherung

Directory of Open Access Journals (Sweden)

Ulf Ehlers

2002-03-01

Full Text Available Qualität wird über die zukünftigen Erfolgschancen des E-Learning entscheiden. Das ist das Ergebnis vieler Analysen und Entwicklungen der letzten Zeit. So stellte etwa die KPMG-Studie heraus, dass es beim E-Learning nicht nur auf gute Technologie ankommt, sondern die betriebliche Lernkultur und der Lerner wesentlich mehr als bisher einzubeziehen sind. Dieser Beitrag beschäftigt sich damit, was Qualität beim E-Learning eigentlich ist und welche Konzepte zur Beschreibung und Sicherung von Qualität bestehen.

Development of a regional concept for energy management for the region of Karlsruhe. Final report; Entwicklung eines regionalen Energiemanagement-Konzeptes und Anwendung auf die TechnologieRegion Karlsruhe. Endbericht

Energy Technology Data Exchange (ETDEWEB)

Rentz, O.; Fichtner, W.; Frank, M. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Industriebetriebslehre und Industrielle Produktion; Wolf, M.A.; Rejman, M.; Eyerer, P. [Fraunhofer-Institut fuer Chemische Technologie (ICT) (Germany); Reimert, R.; Schulz, A.; Buren, V. v. [Karlsruhe Univ. (T.H.) (Germany). Engler-Bunte-Institut Bereich 1 - Gas, Erdoel und Kohle; Schaefers, B.; Bernart, Y. [Karlsruhe Univ. (T.H.) (DE). Institut fuer Soziologie (IfSoz) (Germany)

2002-09-01

Major objectives of this project are: to prepare a cross-disciplinary analysis of all characteristic aspects of the energy supply and demand patterns of a group of selected energy-intensive companies in the Karlsruhe and Rhine harbour area (5 industrial power consumers, 1 utility), to identify practical approaches for optimization and integration of energy and material flows, (networking), and to develop optimised investment and energy supply options within the framework of given conditions. The basis of the optimal solution and energy network presented and explained in detail is a new combined-cycle power plant running as a gas-fired CHP plant, substituting about 50% of the systems formerly used. (orig./CB) [German] Fragestellungen der Effizienzsteigerung und der Verwertung von Abfaellen und Abwaerme gewinnen an Relevanz vor dem Hintergrund der begrenzten Aufnahmekapazitaet der Umweltmedien fuer Schadstoffe. Im Rahmen des Projektes wurde am Beispiel der Region Karlsruhe (5 Industrieunternehmen und 1 EVU) die Entwicklung betriebsuebergreifender Energieversorgungssysteme (Netzwerke) interdisziplinaer analysiert und beschrieben. Zielsetzungen des Projekts waren unter anderem: Bestimmung von zukunftsfaehigen Optionen, intelligente Vernetzung von Energiestroemen, wirtschaftliche Optimierung betriebsuebergreifender Energiemanagement-Loesungen. Die optimale vorgestellte Loesung ist charakterisiert durch den Neubau einer zentralen, gasgefeuerten GuD-Anlage, die etwa die Haelfte der bisherigen Anlagen ersetzt und zusammen mit den weiterhin genutzten Anlagen die Energieversorgung der Unternehmen sicherstellt. (orig./CB)

Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites.

Science.gov (United States)

Jumaidin, Ridhwan; Sapuan, Salit M; Jawaid, Mohammad; Ishak, Mohamad R; Sahari, Japar

2017-04-01

The aim of this research is to investigate the effect of sugar palm fibre (SPF) on the mechanical, thermal and physical properties of seaweed/thermoplastic sugar palm starch agar (TPSA) composites. Hybridized seaweed/SPF filler at weight ratio of 25:75, 50:50 and 75:25 were prepared using TPSA as a matrix. Mechanical, thermal and physical properties of hybrid composites were carried out. Obtained results indicated that hybrid composites display improved tensile and flexural properties accompanied with lower impact resistance. The highest tensile (17.74MPa) and flexural strength (31.24MPa) was obtained from hybrid composite with 50:50 ratio of seaweed/SPF. Good fibre-matrix bonding was evident in the scanning electron microscopy (SEM) micrograph of the hybrid composites' tensile fracture. Fourier transform infrared spectroscopy (FT-IR) analysis showed increase in intermolecular hydrogen bonding following the addition of SPF. Thermal stability of hybrid composites was enhanced, indicated by a higher onset degradation temperature (259°C) for 25:75 seaweed/SPF composites than the individual seaweed composites (253°C). Water absorption, thickness swelling, water solubility, and soil burial tests showed higher water and biodegradation resistance of the hybrid composites. Overall, the hybridization of SPF with seaweed/TPSA composites enhances the properties of the biocomposites for short-life application; that is, disposable tray, plate, etc. Copyright © 2017 Elsevier B.V. All rights reserved.

Characterisation of metal–thermoplastic composite hybrid joints by means of a mandrel peel test

NARCIS (Netherlands)

Su, Yibo; de Rooij, Matthias B.; Grouve, Wouter Johannes Bernardus; Warnet, Laurent

2016-01-01

Fastener free metal–carbon fibre reinforced thermoplastic composite hybrid joints show potential for application in aerospace structures. The strength of the metal–thermoplastic composite interface is crucial for the performance of the entire hybrid joint. Optimisation of the interface requires an

On the development of an intrinsic hybrid composite

International Nuclear Information System (INIS)

Kießling, R; Ihlemann, J; Riemer, M; Drossel, W-G; Scharf, I; Lampke, T; Sharafiev, S; Pouya, M; Wagner, M F-X

2016-01-01

Hybrid parts, which combine low weight with high strength, are moving into the focus of the automotive industry, due to their high potential for usage in the field of crash-relevant structures. In this contribution, the development of an intrinsic hybrid composite is presented, with a focus on the manufacturing process, complex simulations of the material behaviour and material testing. The hybrid composite is made up of a continuous fibre- reinforced plastic (FRP), in which a metallic insert is integrated. The mechanical behaviour of the individual components is characterised. For material modelling, an approach is pointed out that enables modelling at large strains by directly connected rheological elements. The connection between the FRP and the metallic insert is realised by a combination of form fit and adhesive bonds. On the one hand, adhesive bonds are generated within a sol gel process. On the other hand, local form elements of the metallic insert are pressed into the FRP. We show how these form elements are generated during the macroscopic forming process. In addition, the applied sol gel process is explained. Finally, we consider design concepts for a specimen type for high strain testing of the resulting interfaces. (paper)

Neue Energiespeichermaterialien für Lithium-Schwefel-Batterien

OpenAIRE

Frey, Martin

2017-01-01

Angesichts schwindender Mengen sowie hoher Preise fossiler Energieträger und der damit einhergehenden Umweltbelastung erscheint ein Umstieg auf regenerative Energiequellen unausweichlich. Die stark schwankenden Leistungen aus Wind- und Sonnenenergie generieren dabei einen starken Bedarf im Bereich der elektrochemischen Energiespeicher. Die Lithium-Schwefel Technologie repräsentiert in diesem Zusammenhang einen vielversprechenden Kandidaten einer neuen Generation leistungsfähiger, sicherer, ab...

Kenaf/Synthetic and Kevlar®/Cellulosic Fiber-Reinforced Hybrid Composites: A Review

Directory of Open Access Journals (Sweden)

Suhad D. Salman

2015-08-01

Full Text Available This paper reviews the published and ongoing research work on kenaf/synthetic and Kevlar®/cellulosic fiber-reinforced composite materials. The combination of natural fibers with synthetic fibers in hybrid composites has become increasingly applied in several different fields of technology and engineering. As a result, a better balance between performance and cost is expected to be achieved by 2015, through appropriate material design. This review is intended to provide an outline of the essential outcomes of those hybrid composite materials currently utilized, focusing on processing and mechanical and structural properties.

Preparation and Characterization of Graphene-Based Magnetic Hybrid Nano composite

International Nuclear Information System (INIS)

Jashiela Wani Jusin; Madzlan Aziz

2016-01-01

Graphene-based magnetic hybrid nano composite has the advantage of exhibiting better performance as platform or supporting materials to develop novel properties of composite by increasing selectivity of the targeted adsorbate. The hybrid nano material was prepared by mixing and hydrolysing iron (II) and iron (III) salt precursors in the presence of GO dispersion through coprecipitation method followed by in situ chemical reduction of GO. The effect of weight loading ratio of Fe to GO (4:1, 2.5:1, 1:1 and 1:4) on structural properties of the hybrid nano materials was investigated. The presence of characteristic peaks in FTIR spectra indicated that GO has been successfully oxidized from graphite while the decrease in oxygenated functional groups and peaks intensity evidenced the formation of hybrid nano materials through the subsequent reduction process. The presence of characteristic peaks in XRD pattern denoted that magnetite nanoparticles disappeared at higher loading of GO. TEM micrograph showed that the best distribution of iron oxide particles on the surface of hybrid nano material occurred when the loading ratio of Fe to GO was fixed at 2:5 to 1. The reduced graphene oxide (RGO) sheets in the hybrid materials showed less wrinkled sheet like structure compared to GO due to exfoliation and reduction process during the synthesis. The layered morphology of GO degrades at higher concentrations of iron oxide. (author)

Übergewicht und Adipositas in Kindheit und Jugend

OpenAIRE

Nitzko, Sina

2010-01-01

Einführend wird auf wesentliche Entwicklungsaspekte der interessierenden Lebensphasen Kindheit und Jugend eingegangen. Im Anschluss daran werden verschiedene Aspekte von Übergewicht und Adipositas in Kindheit und Jugend thematisiert. Neben der Definition und Diagnostik, wird auf Möglichkeiten der Klassifikation sowie die Epidemiologie eingegangen. Dargestellt werden darüber hinaus körperliche und psychische Folgestörungen, welche mit Adipositas assoziiert sein können. Basierend auf der...

Combined functional and morphological imaging of sarcomas. Significance for diagnostics and therapy monitoring; Kombinierte funktionelle und morphologische Bildgebung bei Sarkomen. Stellenwert fuer Diagnostik und Therapiemonitoring

Energy Technology Data Exchange (ETDEWEB)

Schramm, N.; Rist, C.; Reiser, M.F.; Berger, F. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany); Schlemmer, M.; Issels, R. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Medizinische Klinik und Poliklinik III, Muenchen (Germany)

2010-04-15

{sup 18}F-fluorodeoxyglucose positron-emission tomography (FDG-PET) and especially hybrid FDG-PET/CT is becoming more and more accepted for the clinical management of adult and pediatric patients with sarcomas. By integrating the CT component the specificity in particular but also the sensitivity of the modality are improved further. With PET/CT a complete staging including the detection of lung metastases is feasible in a single examination. For patients with primary bone and soft tissue sarcomas FDG-PET/CT is utilized for diagnosis, staging and restaging, metabolic tumor grading, guidance of biopsies, detection of tumor recurrence and therapy monitoring. Furthermore, it has been demonstrated that FDG uptake of the tumor prior to treatment and changes of FDG uptake after therapy significantly correlate with histopathologic response and survival of patients. Therefore, PET and PET/CT have a prognostic value. In the future new perspectives of hybrid PET/CT imaging will arise by introducing novel radiotracers and combined functional imaging of tumor metabolism and perfusion. High resolution MRI is essential for local evaluation of the primary tumor and preoperative planning with assessment of possible infiltration of vascular or neural structures. Contrast-enhanced MRI remains a key tool in the diagnosis of recurrent disease, especially in tumors which are not hypermetabolic. Dynamic contrast-enhanced MR sequences can significantly contribute to therapy monitoring. More research is necessary to prospectively compare dynamic contrast-enhanced MRI and FDG-PET/CT for evaluation of local and recurrent diseases. (orig.) [German] Die {sup 18}F-Fluordeoxyglukose-Positronenemissionstomographie (FDG-PET) und insbesondere die Hybridbildgebung als FDG-PET/CT gewinnen beim klinischen Management erwachsener und paediatrischer Sarkompatienten zunehmend an Bedeutung. Durch die CT-Komponente werden v. a. die Spezifitaet, aber auch die Sensitivitaet des Verfahrens weiter gesteigert

Hybrid laser technology for composite coating and medical applications

Czech Academy of Sciences Publication Activity Database

Jelínek, Miroslav; Kocourek, Tomáš; Písařík, Petr; Mikšovský, Jan; Remsa, Jan; Mihailescu, I. N.; Kopeček, Jaromír

2014-01-01

Roč. 10, č. 1 (2014), s. 1-8 ISSN 1823-3430 R&D Projects: GA ČR(CZ) GA101/09/0702; GA MŠk LD12069 Institutional support: RVO:68378271 Keywords : hybrid technology * pulsed laser deposition * biocompatible composites * doped coating * composite coating Subject RIV: BM - Solid Matter Physics ; Magnetism http://web.usm.my/jes/pastIssue.html

Blockchain

OpenAIRE

Gayvoronskaya, Tatiana (M. Sc.); Meinel, Christoph (Prof. Dr.); Schnjakin, Maxim (Dr.)

2018-01-01

Der Begriff Blockchain ist in letzter Zeit zu einem Schlagwort geworden, aber nur wenige wissen, was sich genau dahinter verbirgt. Laut einer Umfrage, die im ersten Quartal 2017 veröffentlicht wurde, ist der Begriff nur bei 35 Prozent der deutschen Mittelständler bekannt. Dabei ist die Blockchain-Technologie durch ihre rasante Entwicklung und die globale Eroberung unterschiedlicher Märkte für Massenmedien sehr interessant. So sehen viele die Blockchain-Technologie entweder als eine Allzwec...

Steam and hot air injection for thermal rehabilitation of contaminated sites; Wasserdampf- und Heissluftinjektion zur thermischen Sanierung kontaminierter Standorte

Energy Technology Data Exchange (ETDEWEB)

Schmidt, R

2001-07-01

Verwendung von Wasserdampf als Waermetraegerfluid und ein erster pilothafter Einsatz in der Altlastensanierungspraxis. In der grundlegenden ersten Projektphase wurden dabei die Aspekte des Waermetransports (Faerber, 1997) und des Schadstoffverhaltens (Betz, 1998) in homogenen poroesen Medien bei der reinen Dampfinjektion in Versuchsbehaeltern verschiedener Dimensionalitaet (1D, 2D, 3D) im Labor- und technischen Massstab untersucht und daraus Anwendungskriterien fuer die Technologie abgeleitet. (orig.)

The effect of thermo-mechanical processing on physical properties of processed amaranth and oat bran composites

Science.gov (United States)

Amaranth-oat composites were developed using gluten free amaranth flour containing essential amino acids and minerals with oat products containing ß-glucan, known for lowering blood cholesterol. Amaranth flour and oat bran concentrate (OBC) composites (1:4) were processed using different technologie...

Auf dem Weg zu semantischen APIs für Forschungsdatendienste

Directory of Open Access Journals (Sweden)

Anna Fensel

2017-09-01

Full Text Available Die schnelle Entwicklung der Internet- und Web-Technologie verändert den Stand der Technik in der Kommunikation von Wissen oder  Forschungsergebnissen. Insbesondere werden semantische Technologien, verknüpfte und offene Daten zu entscheidenden Faktoren für einen  erfolgreichen und effizienten Forschungsfortschritt. Zuerst definiere ich den Research Data Service (RDS und diskutiere typische aktuelle  und mögliche zukünftige Nutzungsszenarien mit RDS. Darüber hinaus bespreche ich den Stand der Technik in den Bereichen semantische Dienstleistung und Datenanmerkung und API-Konstruktion sowie infrastrukturelle Lösungen, die für die RDS-Realisierung anwendbar sind. Zum Schluss werden noch innovative Methoden der Online-Verbreitung, Förderung und effizienten Kommunikation der Forschung diskutiert.

Ballistic Impact Response of Woven Hybrid Coir/Kevlar Laminated Composites

Directory of Open Access Journals (Sweden)

Azrin Hani A.R

2016-01-01

Full Text Available The effects of different laminated hybrid composites stacking configuration subjected to ballistic impact were investigated. The hybrid composites consist of woven coir (C and woven Kevlar (K layers laminated together. The samples of woven coir were prepared using handloom device. The composites were produced by stacking the laminated woven coir and Kevlar alternately with the presence of the binder. The samples were tested under ballistic impact with different stacking configuration. The results obtained had successfully achieved the National Institute of Justice (NIJ standard level IIA with energy absorption of 435.6 kJ and 412.2 kJ under the projectile speed of between 330 m/s and 321 m/s respectively. Samples that having Kevlar layer at the front face and woven coir layer as back face achieved partial penetration during projectile impact. This orientation is proven to have good impact energy absorption and able to stop projectile at the second panel of the composites.

Hybrid adsorption compression for industrial applications. HYACINT. Public final report; Hybride Adsorptie Compressie voor Industriele Toepassingen. HYACINT. Openbare eindrapportage

Energy Technology Data Exchange (ETDEWEB)

Van der Pal, M. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

2013-06-15

Heat driven heat transformers can upgrade heat from about 100-120 degrees Celsius to 180-200C. However, most of the waste heat is below 100C. The hybrid adsorption compression technology offers the possibility to upgrade by at least 50C. The hybrid concept combines a heat-driven heat transformer with a power-driven compression heat pump. As part of the HYACINT project it has been examined which components of the two heat pump technologies are the most suitable for application in a hybrid heat transformer. This is done through a literature survey, sociological research, model calculations and measurements of components [Dutch] Warmtegedreven warmtetransformatoren kunnen warmte vanaf ongeveer 100 a 120C opwaarderen tot warmte van 180 tot 200C. Het merendeel van de restwarmte bevindt zich echter onder 100C. De hybride adsorptie compressie technologie biedt de mogelijkheid om ook deze warmte met tenminste 50C te kunnen verhogen. Het hybride concept combineert een warmtegedreven warmtetransformator met een arbeid aangedreven compressie warmtepomp. Binnen het HYACINT project is onderzocht welke componenten van beide warmtepomp technologieen het meest geschikt zijn voor toepassing in een hybride warmtetransformator. Dit is gedaan door middel van literatuurstudie, sociaalwetenschappelijk onderzoek, toepassingspotentieelonderzoek, modelberekeningen en metingen aan componenten.

Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite

International Nuclear Information System (INIS)

An, Feng; Lu, Chunxiang; Li, Yonghong; Guo, Jinhai; Lu, Xiaoxuan; Lu, Huibin; He, Shuqing; Yang, Yu

2012-01-01

Highlights: → CNTs were uniformly grown onto the carbon fibers. → No obvious mechanical properties of carbon fiber were observed after CNT growth. → The IFSS of multiscale epoxy composite was measured by single fiber pull-out tests. → Observing fractography of composite, the fracture modes of CNTs were discussed. -- Abstract: The multiscale carbon nanotube-hybridized carbon fiber was prepared by a newly developed aerosol-assisted chemical vapour deposition. Scanning electron microscopy and transmission electron microscope were carried out to characterize this multiscale material. Compared with the original carbon fibers, the fabrication of this hybrid fiber resulted in an almost threefold increase of BET surface area to reach 2.22 m 2 /g. Meanwhile, there was a slight degradation of fiber tensile strength within 10%, while the fiber modulus was not significantly affected. The interfacial shearing strength of a carbon fiber-reinforced polymer composite with carbon nanotube-hybridized carbon fiber and an epoxy matrix was determined from the single fiber pull-out tests of microdroplet composite. Due to an efficient increase of load transfer at the fiber/matrix interfaces, the interracial shear strength of composite reinforced by carbon nanotube-hybridized carbon fiber is almost 94% higher than that of one reinforced by the original carbon fiber. Based on the fractured morphologies of the composites, the interfacial reinforcing mechanisms were discussed through proposing different types of carbon nanotube fracture modes along with fiber pulling out from epoxy composites.

Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites

International Nuclear Information System (INIS)

Shanmugam, D.; Thiruchitrambalam, M.

2013-01-01

Highlights: • New type of hybrid composite with Palmyra Palm Leaf Stalk Fibers (PPLSF) and jute. • Composites fabricated with continuous, unidirectional fibers. • Alkali treatment and hybridizing jute imparted good static and dynamic properties. • Properties are comparable with well know natural/glass fiber composites. • New hybrid composite can be an alternative in place of synthetic fiber composites. - Abstract: Alkali treated continuous Palmyra Palm Leaf Stalk Fiber (PPLSF) and jute fibers were used as reinforcement in unsaturated polyester matrix and their static and dynamic mechanical properties were evaluated. Continuous PPLSF and jute fibers were aligned unidirectionally in bi-layer arrangement and the hybrid composites were fabricated by compression molding process. Positive hybrid effect was observed for the composites due to hybridization. Increasing jute fiber loading showed a considerable increase in tensile and flexural properties of the hybrid composites as compared to treated PPLSF composites. Scanning Electron microscopy (SEM) of the fractured surfaces showed the nature of fiber/matrix interface. The impact strength of the hybrid composites were observed to be less compared to pure PPLSF composites. Addition of jute fibers to PPLSF and alkali treatment of the fibers has enhanced the storage and loss modulus of the hybrid composites. A positive shift of Tan δ peaks to higher temperature and reduction in the peak height of the composites was also observed. The composites with higher jute loading showed maximum damping behavior. Overall the hybridization was found to be efficient showing increased static and dynamic mechanical properties. A comparative study of properties of this hybrid composite with other hybrids made out of using natural/glass fibers is elaborated. Hybridization of alkali treated jute and PPLSF has resulted in enhanced properties which are comparable with other natural/glass fiber composites thus increasing the scope of

Finite element analysis when orthogonal cutting of hybrid composite CFRP/Ti

International Nuclear Information System (INIS)

Xu, Jinyang; Mansori, Mohamed El

2015-01-01

Hybrid composite, especially CFRP/Ti stack, is usually considered as an innovative structural configuration for manufacturing the key load-bearing components in modern aerospace industry. This paper originally proposed an FE model to simulate the total chip formation process dominated the hybrid cutting operation. The hybrid composite model was established based on three physical constituents, i.e., Ti constituent, interface and CFRP constituent. Different constitutive models and damage criteria were introduced to replicate the interrelated cutting behaviour of the stack material. The CFRP/Ti interface was modelled as a third phase through the concept of cohesive zone (CZ). Particular attention was made on the comparative studies of the influence of different cutting-sequence strategies on the machining responses induced in hybrid stack cutting. The numerical results emphasized the pivotal role of cutting-sequence strategy on the various machining induced responses including cutting-force generation, machined surface quality and induced interface damage. (paper)

Composite Strain Hardening Properties of High Performance Hybrid Fibre Reinforced Concrete

Directory of Open Access Journals (Sweden)

Vikram Jothi Jayakumar

2014-01-01

Full Text Available Hybrid fibres addition in concrete proved to be a promising method to improve the composite mechanical properties of the cementitious system. Fibre combinations involving different fibre lengths and moduli were added in high strength slag based concrete to evaluate the strain hardening properties. Influence of hybrid fibres consisting of steel and polypropylene fibres added in slag based cementitious system (50% CRL was explored. Effects of hybrid fibre addition at optimum volume fraction of 2% of steel fibres and 0.5% of PP fibres (long and short steel fibre combinations were observed in improving the postcrack strength properties of concrete. Test results also indicated that the hybrid steel fibre additions in slag based concrete consisting of short steel and polypropylene (PP fibres exhibited a the highest compressive strength of 48.56 MPa. Comparative analysis on the performance of monofibre concrete consisting of steel and PP fibres had shown lower residual strength compared to hybrid fibre combinations. Hybrid fibres consisting of long steel-PP fibres potentially improved the absolute and residual toughness properties of concrete composite up to a maximum of 94.38% compared to monofibre concrete. In addition, the relative performance levels of different hybrid fibres in improving the matrix strain hardening, postcrack toughness, and residual strength capacity of slag based concretes were evaluated systematically.

Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application

Institute of Scientific and Technical Information of China (English)

R. YAHAYA; S.M. SAPUAN; M. JAWAID; Z. LEMAN; E.S. ZAINUDIN

2016-01-01

This paper presents the effect of kenaf fibre orientation on the mechanical properties of kenaf–aramid hybrid composites for military vehicle's spall liner application. It was observed that the tensile strength of woven kenaf hybrid composite is almost 20.78%and 43.55%higher than that of UD and mat samples respectively. Charpy impact strength of woven kenaf composites is 19.78%and 52.07%higher than that of UD and mat kenaf hybrid composites respectively. Morphological examinations were carried out using scanning electron microscopy. The results of this study indicate that using kenaf in the form of woven structure could produce a hybrid composite material with high tensile strength and impact resistance properties.

Influence of Hybridizing Flax and Hemp-Agave Fibers with Glass Fiber as Reinforcement in a Polyurethane Composite

Directory of Open Access Journals (Sweden)

Pankaj Pandey

2016-05-01

Full Text Available In this study, six combinations of flax, hemp, and glass fiber were investigated for a hybrid reinforcement system in a polyurethane (PU composite. The natural fibers were combined with glass fibers in a PU composite in order to achieve a better mechanical reinforcement in the composite material. The effect of fiber hybridization in PU composites was evaluated through physical and mechanical properties such as water absorption (WA, specific gravity (SG, coefficient of linear thermal expansion (CLTE, flexural and compression properties, and hardness. The mechanical properties of hybridized samples showed mixed trends compared to the unhybridized samples, but hybridization with glass fiber reduced water absorption by 37% and 43% for flax and hemp-agave PU composites respectively.

Ellbogen- und Handgelenksendoprothetik beim Rheumatiker - Richtlinien und Rehabilitation

Directory of Open Access Journals (Sweden)

Chochole M

2008-01-01

Full Text Available Die Endoprothetik an Ellbogen und Handgelenk ist seit etwa drei Jahrzehnten etabliert. An beiden Gelenken haben sich einzelne Implantate oder Designs durchgesetzt. Operationstechniken und Nachuntersuchungsergebnisse sind publiziert. Wenig ist jedoch zum Thema Nachbehandlung und Nachsorge veröffentlicht. Diese Arbeit beschäftigt sich detailliert mit der ärztlichen und therapeutischen Betreuung nach Implantation einer Ellbogen- oder Handgelenksendoprothese beim Patienten mit rheumatischer Arthritis unter Aufgliederung in Krankenhausaufenthalt, ambulanter Nachsorge sowie stationärer Rehabilitation. Dabei werden Zeitrahmen, Therapieziele und Behandlungen gesondert angeführt.

Mechanical Properties of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composites: Multiscale Modeling and Experiments

Science.gov (United States)

Hadden, C. M.; Klimek-McDonald, D. R.; Pineda, E. J.; King, J. A.; Reichanadter, A. M.; Miskioglu, I.; Gowtham, S.; Odegard, G. M.

2015-01-01

Because of the relatively high specific mechanical properties of carbon fiber/epoxy composite materials, they are often used as structural components in aerospace applications. Graphene nanoplatelets (GNPs) can be added to the epoxy matrix to improve the overall mechanical properties of the composite. The resulting GNP/carbon fiber/epoxy hybrid composites have been studied using multiscale modeling to determine the influence of GNP volume fraction, epoxy crosslink density, and GNP dispersion on the mechanical performance. The hierarchical multiscale modeling approach developed herein includes Molecular Dynamics (MD) and micromechanical modeling, and it is validated with experimental testing of the same hybrid composite material system. The results indicate that the multiscale modeling approach is accurate and provides physical insight into the composite mechanical behavior. Also, the results quantify the substantial impact of GNP volume fraction and dispersion on the transverse mechanical properties of the hybrid composite, while the effect on the axial properties is shown to be insignificant.

Mechanical Properties of Graphene Nanoplatelet Carbon Fiber Epoxy Hybrid Composites: Multiscale Modeling and Experiments

Science.gov (United States)

Hadden, Cameron M.; Klimek-McDonald, Danielle R.; Pineda, Evan J.; King, Julie A.; Reichanadter, Alex M.; Miskioglu, Ibrahim; Gowtham, S.; Odegard, Gregory M.

2015-01-01

Because of the relatively high specific mechanical properties of carbon fiber/epoxy composite materials, they are often used as structural components in aerospace applications. Graphene nanoplatelets (GNPs) can be added to the epoxy matrix to improve the overall mechanical properties of the composite. The resulting GNP/carbon fiber/epoxy hybrid composites have been studied using multiscale modeling to determine the influence of GNP volume fraction, epoxy crosslink density, and GNP dispersion on the mechanical performance. The hierarchical multiscale modeling approach developed herein includes Molecular Dynamics (MD) and micromechanical modeling, and it is validated with experimental testing of the same hybrid composite material system. The results indicate that the multiscale modeling approach is accurate and provides physical insight into the composite mechanical behavior. Also, the results quantify the substantial impact of GNP volume fraction and dispersion on the transverse mechanical properties of the hybrid composite, while the effect on the axial properties is shown to be insignificant.

Multimedia als Entwicklungsfaktor im ländlichen Raum? : Fallbeispiel Wirtschaftsregion Friedrichshafen/Bodensee

OpenAIRE

Haupenthal, Edmund; Leuninger, Stefan; Beermann, Petra; Kutter, Martina

1998-01-01

Im Rahmen der vorliegenden empirischen Studie in der Wirtschaftsregion Friedrichshafen wurden die Wechselwirkungen zwischen regionalen Strukturfaktoren und „Multimedia-Entwicklungen“ im ländlichen Raum untersucht. Die positive Multimedia-Entwicklung geht auf folgende regionale Erfolgsfaktoren zurück: die politische Akzeptanz der neuen Technologie, die Vorhaltung der Multimedia-Akademie, die regionale Nachfrage, die Verfügbarkeit ausreichenden Know-hows und Humankapitals sowie das Vorhandensei...

Fabrication and adsorption properties of hybrid fly ash composites

Energy Technology Data Exchange (ETDEWEB)

Gao, Mengfan [Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi' an710119, Shaanxi (China); Ma, Qingliang, E-mail: maqingliang@tyut.edu.cn [Key Laboratory of Coal Science and Technology, Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan, 030024 (China); Lin, Qingwen; Chang, Jiali [Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi' an710119, Shaanxi (China); Ma, Hongzhu, E-mail: hzmachem@snnu.edu.cn [Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi' an710119, Shaanxi (China)

2017-02-28

Highlights: • Hybrid hydrophilic/hydrophobic FA composites was constructed. • 99.2% O-II removal was obtained with MF/P(DMDAAC-co-AAM). • MF/KH-570 showed better hydrophobic property. • The possible mechanism of FA composite fabrication was studied. • The Freundlich isotherm and pseudo-second-order kinetic model fit better with kerosene adsorption. - Abstract: In order to realize the utilization of fly ash (FA) as industrial solid waste better, high-efficient inorganic/organic hybrid composite adsorbents derived from (Ca(OH){sub 2}/Na{sub 2}FeO{sub 4}) modified FA (MF) was fabricated. The hydrophilic cationic polymer (P(DMDAAC-co-AAM) or hydrophobic modifier (calcium-570) were used. The prepared composites were characterized by X-ray fluorescence spectroscopy, energy dispersive spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller, Fourier transform infrared spectroscopy, thermogravimetry, and contact angle test. The adsorption of cationic composites MF/P(DMDAAC-co-AAM) towards Orange II in wastewater was investigated. The results show that: adsorption amount of 24.8 mg/g with 2000 mg/L of composites, 50 mg/L Orange II, original pH (6–8), at 40 min and room temperature, was obtained. Meanwhile, oil adsorption ratio Q(g/g) of hydrophobic composites MF/KH-570 was also evaluated. The maximum Q of 17.2 g/g to kerosene was obtained at 40 min. The isotherm and kinetics of these two adsorption processes were also studied. The results showed that the fabricated MF composites modified with hydrophilic or hydrophobic group can be used to adsorb dye in wastewater or oil effectively.

Editorial: Computerspiele und Videogames in formellen und informellen Bildungskontexten

Directory of Open Access Journals (Sweden)

Johannes Fromme

2008-01-01

Full Text Available Computer- und Videospiele sind heute ein selbstverständlicher Bestandteil der Lebenswelt vieler Kinder und Jugendlicher, aber auch von (jüngeren Erwachsenen, die mit diesen neuen Medien aufgewachsen sind. Lange Zeit haben elektronische Bildschirmspiele allenfalls sporadische Beachtung gefunden. Weder in der Medienforschung oder Medienpädagogik noch in der breiteren Öffentlichkeit waren sie ein Gegenstand von breiterem Interesse.* In den letzten knapp zehn Jahren sind Video- und Computerspiele allerdings zunehmend in den Fokus der Aufmerksamkeit gerückt. Dabei sind in der massenmedial vermittelten Öffentlichkeit vor allem Amokläufe in Schulen in einen direkten Zusammenhang mit den Vorlieben (der Täter für bestimmte Computerspiele gebracht worden. Die auch von prominenten Politikern aufgegriffene These lautete, dass gewalthaltige Spiele wie der First Person Shooter «Counterstrike» ein virtuelles Trainingsprogramm für das Töten und daher als wesentliche Ursache solcher Schulmassaker anzusehen seien. Auf der Basis dieser kausalen Wirkungsannahmen bzw. der unterstellten negativen Lern- und Trainingseffekte werden seither immer wieder Forderungen nach einem Verbot solcher «Killerspiele» oder gar nach der Verbannung aller Bildschirmmedien aus den Kinderzimmern abgeleitet. Neben solcher skandalisierter Thematisierung ist aber zunehmend auch eine nüchterne wissenschaftliche Auseinandersetzung zu konstatieren. So haben sich seit Beginn des neuen Jahrtausends die «digital game studies» als interdisziplinäres Forschungsfeld etabliert. Im Jahr 2000 wurde innerhalb der Gesellschaft für Medienwissenschaft z.B. die AG Games gebildet, die sich zu einem wichtigen deutschsprachigen Forum für die wissenschaftliche Beschäftigung mit Computerspielen entwickelt hat, und im Jahr 2002 entstand die internationale Digital Games Research Association (DiGRA, die im September 2009 ihre vierte grosse Konferenz nach 2003, 2005 und 2007 durchgeführt hat

Nationale und transnationale Vernetzung polnischer Städte und Regionen: Auf dem Weg zu einer nachhaltigen Stadt- und Regionalentwicklung

OpenAIRE

Dorsch, Pamela

2003-01-01

"Die Studie 'Nationale und transnationale Vernetzung polnischer Städte und Regionen - Bedeutung für eine nachhaltige Stadt- und Regionalentwicklung' liefert einen Überblick über die Einbindung polnischer Kommunen und Wojewodschaften in allgemeine und politikfeldspezifische Netzwerke auf nationaler und transnationaler Ebene. Besondere Berücksichtigung findet hierbei die Vernetzung in Fragen von Nachhaltigkeit und des Umweltschutzes. Einführend zeigt die Studie den Prozess zunehmender Dezentral...

Impact strength and flexural properties enhancement of methacrylate silane treated oil palm mesocarp fiber reinforced biodegradable hybrid composites.

Science.gov (United States)

Eng, Chern Chiet; Ibrahim, Nor Azowa; Zainuddin, Norhazlin; Ariffin, Hidayah; Yunus, Wan Md Zin Wan

2014-01-01

Natural fiber as reinforcement filler in polymer composites is an attractive approach due to being fully biodegradable and cheap. However, incompatibility between hydrophilic natural fiber and hydrophobic polymer matrix restricts the application. The current studies focus on the effects of incorporation of silane treated OPMF into polylactic acid (PLA)/polycaprolactone (PCL)/nanoclay/OPMF hybrid composites. The composites were prepared by melt blending technique and characterize the composites with Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). FTIR spectra indicated that peak shifting occurs when silane treated OPMF was incorporated into hybrid composites. Based on mechanical properties results, incorporation of silane treated OPMF enhances the mechanical properties of unmodified OPMF hybrid composites with the enhancement of flexural and impact strength being 17.60% and 48.43%, respectively, at 10% fiber loading. TGA thermogram shows that incorporation of silane treated OPMF did not show increment in thermal properties of hybrid composites. SEM micrographs revealed that silane treated OPMF hybrid composites show good fiber/matrix adhesion as fiber is still embedded in the matrix and no cavity is present on the surface. Water absorption test shows that addition of less hydrophilic silane treated OPMF successfully reduces the water uptake of hybrid composites.

Tribological properties of three-dimensional braided carbon/Kevlar/epoxy hybrid composites under dry and lubricated conditions

International Nuclear Information System (INIS)

Wan, Y.Z.; Huang, Y.; He, F.; Li, Q.Y.; Lian, J.J.

2007-01-01

This paper presents a study of the tribological properties of three-dimensional (3-D) braided carbon/Kevlar/epoxy hybrid composites. Their specific wear rate and the coefficient of friction were examined as a function of operating conditions (load and sliding distance) under dry and lubricated conditions. In addition, the 3-D braided hybrid composites with varying carbon to Kevlar fiber volume ratio were tested to assess hybrid effects. It was found that the friction and wear rate decreased with sliding distance and then leveled off under dry and lubricated conditions. Different changing patterns with normal load were observed under two different sliding conditions. Furthermore, it was noted that negative hybrid effects on the wear resistance and the friction coefficient were identified for the current 3-D braided hybrid system. The composite with a carbon to Kevlar ratio of 3:2 was found to have the least wear and friction among all 3-D braided hybrid composites studied. Worn surfaces were observed by scanning electron microscope (SEM) and wear mechanisms were discussed in this study

Fracking in the conflict area between energy and environmental policy. The discussion in Germany and the Netherlands by comparison; Fracking im Spannungsfeld zwischen Energie- und Umweltpolitik. Die Diskussion in Deutschland und den Niederlanden im Vergleich

Energy Technology Data Exchange (ETDEWEB)

Kontny, Kerstin

2016-11-01

The shale gas production using the so-called fracking method represents for opponents the use of a high-risk technology. Proponents see it, however a technological advance, and the answer to current energy issues. For the citizens of a country, the debate involves mainly uncertainties, the technology is still associated with risks that are not only difficult to assess for the layman. Due to these uncertainties, there is a danger that scientific evidence for political purposes are exploited. Particularly exciting is therefore the question of how the subject is discussed in different countries. In Fracking in the conflict area between energy and environmental policies are the debates in natural gas country Netherlands and the country of energy transition, Germany are compared. Kerstin Kontry's research put emphasis on the parties to the debate actors, the course of the debate and the issues are discussed. The main question is to what extent the discussions are shaped by national factors. [German] Die Schiefergasfoerderung mit Hilfe der sogenannten Fracking-Methode stellt fuer Gegner die Anwendung einer Hochrisikotechnologie dar, Befuerworter sehen darin hingegen einen technologischen Fortschritt und die Antwort auf derzeitige Energiefragen. Fuer die Buerger eines Landes birgt die Debatte vor allem Unsicherheiten, ist die Technologie doch mit Risiken verbunden, die nicht nur fuer den Laien schwer einzuschaetzen sind. Aufgrund dieser Unsicherheiten droht die Gefahr, dass wissenschaftliche Erkenntnisse fuer politische Zwecke instrumentalisiert werden. Besonders spannend ist daher die Frage, wie die Thematik in unterschiedlichen Laendern diskutiert wird. In Fracking im Spannungsfeld zwischen Energie- und Umweltpolitik werden die Debatten im Erdgasland Niederlande und dem Land der Energiewende, Deutschland, verglichen. Den Schwerpunkt legt Kerstin Kontny dabei auf die an der Debatte beteiligten Akteure, den Verlauf der Debatte sowie die behandelten Themen. Dabei

Enhanced mechanical properties and biocompatibility of novel hydroxyapatite/TOPAS hybrid composite for bone tissue engineering applications

Energy Technology Data Exchange (ETDEWEB)

Ain, Qurat Ul [Department of Materials Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, H-12, Islamabad (Pakistan); Khan, Ahmad Nawaz, E-mail: ahmad.nawaz@scme.nust.edu.pk [Department of Materials Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, H-12, Islamabad (Pakistan); Nabavinia, Mahboubeh [Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA (United States); Mujahid, Mohammad [Department of Materials Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, H-12, Islamabad (Pakistan)

2017-06-01

The bioactivity and mechanical properties of hybrid composites of hydroxyapatite (HA) in cyclic olefinic copolymer (COC) also known commercially as TOPAS are investigated, first time, for regeneration and repair of the bone tissues. HA is synthesized to obtain the spherically shaped nanoparticles in the size range of 60 ± 20 nm. Various concentrations of HA ranging from 1 to 30 wt% are dispersed in TOPAS using sodium dodecyl sulfate (SDS) coupling agent for better dispersion and interaction of hydrophilic HA with hydrophobic TOPAS. Scanning electron microscope shows the uniform dispersion of HA ≤ 10 wt% in TOPAS and at higher concentrations > 10 wt%, agglomeration occurs in the hybrid composites. Tunable mechanical properties are achieved as the compressive modulus and strength are increased around 140% from 6.4 to 15.3 MPa and 185% from 0.26 to 0.74 MPa, respectively. Such increase in the mechanical properties of TOPAS is attributed to the anchoring of the polymer chains in the vicinity of HA nanoparticles owing to better dispersion and interfacial interactions. In comparison to neat TOPAS, hybrid composites of TOPAS/HA promoted the cell adhesion and proliferation significantly. The cell density and proliferation of TOPAS/HA hybrid composites is enhanced 9 and 3 folds, respectively, after 1 day culturing in preosteoblasts cells. Moreover, the morphology of cells changed from spherical to flattened spread morphology demonstrating clearly the migration of the cells for the formation of interconnected cellular network. Additionally, very few dead cells are found in hybrid composites showing their cytocompatibility. Overall, the hybrid composites of TOPAS/HA exhibited superior strength and stiffness along with enhanced cytocompatibility for bone tissue engineering applications. - Highlights: • TOPAS/HA hybrid composites exhibited enhanced mechanical properties owing to better dispersion and interaction of HA. • Without affecting the degradation rate, the

Enhanced mechanical properties and biocompatibility of novel hydroxyapatite/TOPAS hybrid composite for bone tissue engineering applications

International Nuclear Information System (INIS)

Ain, Qurat Ul; Khan, Ahmad Nawaz; Nabavinia, Mahboubeh; Mujahid, Mohammad

2017-01-01

The bioactivity and mechanical properties of hybrid composites of hydroxyapatite (HA) in cyclic olefinic copolymer (COC) also known commercially as TOPAS are investigated, first time, for regeneration and repair of the bone tissues. HA is synthesized to obtain the spherically shaped nanoparticles in the size range of 60 ± 20 nm. Various concentrations of HA ranging from 1 to 30 wt% are dispersed in TOPAS using sodium dodecyl sulfate (SDS) coupling agent for better dispersion and interaction of hydrophilic HA with hydrophobic TOPAS. Scanning electron microscope shows the uniform dispersion of HA ≤ 10 wt% in TOPAS and at higher concentrations > 10 wt%, agglomeration occurs in the hybrid composites. Tunable mechanical properties are achieved as the compressive modulus and strength are increased around 140% from 6.4 to 15.3 MPa and 185% from 0.26 to 0.74 MPa, respectively. Such increase in the mechanical properties of TOPAS is attributed to the anchoring of the polymer chains in the vicinity of HA nanoparticles owing to better dispersion and interfacial interactions. In comparison to neat TOPAS, hybrid composites of TOPAS/HA promoted the cell adhesion and proliferation significantly. The cell density and proliferation of TOPAS/HA hybrid composites is enhanced 9 and 3 folds, respectively, after 1 day culturing in preosteoblasts cells. Moreover, the morphology of cells changed from spherical to flattened spread morphology demonstrating clearly the migration of the cells for the formation of interconnected cellular network. Additionally, very few dead cells are found in hybrid composites showing their cytocompatibility. Overall, the hybrid composites of TOPAS/HA exhibited superior strength and stiffness along with enhanced cytocompatibility for bone tissue engineering applications. - Highlights: • TOPAS/HA hybrid composites exhibited enhanced mechanical properties owing to better dispersion and interaction of HA. • Without affecting the degradation rate, the

E-Government und E-Banking: Aktueller Stand, Evaluation und Erfolgsfaktoren

OpenAIRE

Bayer, Tobias

2002-01-01

Zu Max Webers Zeiten entsprach die Bürokratie noch ganz dem Vorbild des preussischen Militärs " klare Hierarchien und klare Aufgabenbereiche schlugen sich nieder in Effizienz und Effektivität. Heute ist das Bild getrübt und Worte wie "Erstarrung", "Überreglementierung" und "Verwaltungskultur" machen die Runde. Neben den gestiegenen Erwartungen der Bürger, die sich in Zeiten des E-Banking und E-Commerce nicht mehr in lange Warteschlangen einreihen wollen und auf die rigiden Öffnungszeiten der ...

Hybride Lernarrangements in der universitären Weiterbildung. Das Beispiel Educational Media

Directory of Open Access Journals (Sweden)

Claudia de Witt

2003-11-01

Full Text Available Der Artikel beschreibt eine hybride Lernform, in der Online-Lernphasen mit Präsenzphasen kombiniert werden. "Educational Media" ist ein weiterbildender Masterstudiengang an der Universität Essen-Duisburg, der technische und didaktische Kenntnisse zur Medienerziehung vermittelt. Nach einer Bedarfs- und Zielgruppenanalyse wurde ein Curriculum entwickelt, das hier vorgestellt wird. Während in der Anfangszeit Präsenzphasen und Gruppenelemente (Chatforen besonders wichtig sind, steigt in späteren Phasen das Bedürfnis nach selbstgesteuerten Lernperioden. Eine intensive persönliche Betreuung durch Tutoren sowie die Anbindung an die Institution steigern die Motivation und verringern die Abbrecherquote.

Effects of Kenaf Fiber Orientation on Mechanical Properties and Fatigue Life of Glass/Kenaf Hybrid Composites

Directory of Open Access Journals (Sweden)

Mohaiman Jaffar Sharba

2015-12-01

Full Text Available The objectives of this work were to investigate the effect of kenaf fiber alignment on the mechanical and fatigue properties of kenaf/glass hybrid sandwich composites. Three types of kenaf fibers were used, namely, non-woven random mat, unidirectional twisted yarn, and plain-woven kenaf. A symmetric sandwich configuration was constructed with glass as the shell and kenaf as the core with a constant kenaf/glass weight ratio of 30/70% and a volume fraction of 35%. Tensile, compression, flexural, and fully reversed fatigue tests were conducted, and a morphological study of the tensile failure surface of each hybrid composite was carried out. The non-woven mat kenaf hybrid had poor properties for all tests, while the unidirectional kenaf hybrid composite possessed higher tensile strength and similar compressive properties compared with the woven kenaf. Hybridization with kenaf fibers improved the fatigue degradation coefficient of the final composites to 6.2% and 6.4% for woven and unidirectional kenaf, respectively, compared with 7.9% for non-woven. Because woven kenaf hybrid composite is lightweight, environment friendly, and has a considerable balance in static and fatigue strengths with low fatigue sensitivity in bidirectional planes compared to glass, it is strongly recommended for structural applications.

Optimal design of damping layers in SMA/GFRP laminated hybrid composites

Science.gov (United States)

Haghdoust, P.; Cinquemani, S.; Lo Conte, A.; Lecis, N.

2017-10-01

This work describes the optimization of the shape profiles for shape memory alloys (SMA) sheets in hybrid layered composite structures, i.e. slender beams or thinner plates, designed for the passive attenuation of flexural vibrations. The paper starts with the description of the material and architecture of the investigated hybrid layered composite. An analytical method, for evaluating the energy dissipation inside a vibrating cantilever beam is developed. The analytical solution is then followed by a shape profile optimization of the inserts, using a genetic algorithm to minimize the SMA material layer usage, while maintaining target level of structural damping. Delamination problem at SMA/glass fiber reinforced polymer interface is discussed. At the end, the proposed methodology has been applied to study the hybridization of a wind turbine layered structure blade with SMA material, in order to increase its passive damping.

Cell tower siting and neighbours' rights in Austria; Standortwahl und Anrainerschutz bei Mobilfunk-Basisstationen in Oesterreich

Energy Technology Data Exchange (ETDEWEB)

Moshammer, H.; Hutter, H.P.; Wallner, P.; Kundi, M. [Vienna Univ. (Austria). Inst. fuer Umwelthygiene

2001-07-01

der Anrainer und die Anwendung des Vorsorgeprinzips im Sinne einer Minimierung der Immissionen in den der Allgemeinbevoelkerung zugaenglichen Bereichen anzustreben. Mittels Erhebung unter Teilnehmern der internationalen Tagung zur Situierung von Mobilfunk-Sendern in Salzburg (Juni 2000) konnte ein regional stark unterschiedliches Vorgehen der Behoerden und einzelner Interessensgruppen gezeigt werden, das erheblich zur Rechtsunsicherheit und Eskalation der Lage beitragen duerfte. Aus eigener Erfahrung kann festgestellt werden, dass insbesondere die Vertreter der Kommunikationstechnologie die erforderliche Kommunikation verweigern und so zu einer Steigerung von Aengsten beitragen. Dies ist umso verwunderlicher, als in der heute ueblichen Technologie mit geringem Aufwand vorsorgende Richtwerte (z.B. 1 mW/m{sup 2} Leistungsflussdichte) eingehalten werden koennen. (orig.)

Partial Replacement of Glass Fiber by Woven Kenaf in Hybrid Composites and its Effect on Monotonic and Fatigue Properties

Directory of Open Access Journals (Sweden)

Mohaiman Jaffar Sharba

2016-02-01

Full Text Available Natural–synthetic fiber hybrid composites offer a combination of high mechanical properties from the synthetic fibers and the advantages of renewable fibers to produce a material with highly specific and determined properties. In this study, plain-woven kenaf/glass reinforced unsaturated polyester (UP hybrid composites were fabricated using the hand lay-up method with a cold hydraulic press in a sandwich-configuration laminate. The glass was used as a shell with kenaf as a core, with an approximate total fiber content of 40%. Three glass/kenaf weight ratios percentages of (70/30% (H1, (55/45% (H2, and (30/70% (H3 were used to fabricate hybrid composites. Also pure glass/UP and kenaf/UP were fabricated for comparison purposes. Monotonic tests, namely tensile, compression, and flexural strengths of the composites, were performed. The morphological properties of tensile and compression failure of kenaf and hybrid composites were studied. In addition, uniaxial tensile fatigue life of hybrid composites were conducted and evaluated. The results revealed that the hybrid composite (H1 offered a good balance and the best static properties, but in tensile fatigue loading (H3 displayed low fatigue sensitivity when compared with the other hybrid composites.

A six-year prospective randomized study of a nano-hybrid and a conventional hybrid resin composite in Class II restorations

DEFF Research Database (Denmark)

van Dijken, Jan W V; Pallesen, Ulla

2013-01-01

The objective of this 6 year prospective randomized equivalence trial was to evaluate the long-term clinical performance of a new nano-hybrid resin composite (RC) in Class II restorations in an intraindividual comparison with its well-established conventional hybrid RC predecessor....

Sorption und Verbreitung per- und polyfluorierter Chemikalien (PFAS) in Wasser und Boden

OpenAIRE

Gellrich, Vanessa

2014-01-01

PFAS (= Perfluoroalkyl and Polyfluoroalkyl Substances) sind persistente organische Spurenstoffe, die weltweit in verschiedenen Umweltkompartimenten nachgewiesen werden konnten. Im Rahmen dieser Dissertation sollte die Frage geklärt werden, wie die physikalisch-chemischen Eigenschaften der PFAS - besonders ihre Sorption am Boden - ihr Verhalten und ihre Verbreitung in der Umwelt beeinflussen. Dazu wurde zunächst eine Messmethode entwickelt, optimiert und validiert, mit der 17 per- und polyf...

Isothermal and hygrothermal agings of hybrid glass fiber/carbon fiber composite

Science.gov (United States)

Barjasteh, Ehsan

anhydride/epoxy network used in composite-reinforced conductor cables was investigated to determine the extent of thermal oxidative (surface effect) and non-oxidative (bulk effect) degradation. Thermal oxidation tests were performed in air-circulating and vacuum ovens at 180°C and 200ºC (the maximum emergency temperature for ACCC conductors). The extent of oxidation during aging was determined by monitoring the thickness of the oxidized layer. Results showed that the oxidized layer thickness did not increase monotonically as a function of exposure time, and even decreased for a limited period of time. A phenomenological reaction-diffusion model was implemented to predict the thickness of oxidized layer, and the calculated results were compared with measurements for aging times up to 10,000 hours. The accuracy of the reaction-diffusion-based thickness values for the isothermally aged epoxy specimen was affected by the permeability properties of the oxidized material, and to a lesser extent by the degree of oxidation. The diffusivity varied because of changes in the density of the oxidized layer, the macro-void content, crack formation, and the molecular structures. To investigate the effects on diffusivity, the morphology of the oxidized layer and the void content was monitored over time. In addition, the density of the oxidized specimens was calculated by direct measurements of volume and weight during exposure. An empirically based volume-loss model was developed to predict the changes in volume of the specimen as a function of aging times and hence to predict the effects on the oxidized layer thickness. Volume-loss measurements provide an indication of material degradation by demonstrating a direct measurement of shrinkage rates and insight into crack initiation, as opposed to typical weight-loss measurements that provide no insight into material failure. Thermal oxidation of a unidirectional carbon-fiber/glass-fiber hybrid composite was also investigated in this study

Solution-Processed Small Molecule Bulk Heterojunction Organic Solar Cells: Molecular, Morphological, Interfacial and Device Engineering

OpenAIRE

Min, Jie

2015-01-01

In letzter Zeit haben erneuerbare Energien wie Windkraft, Biomasse, und Solarenergie mehr und mehr an Aufmerksamkeit gewonnen. Neben den verschiedenen Technologien im Feld der erneuerbaren Energien ist die Photovoltaik (PV) eines der bekanntesten geworden. Derzeit lässt sich die PV Technologie in drei Generationen einteilen. Verglichen mit den anderen beiden Klassen der PV auf dem Markt, besitzt die organische Photovoltaik (OPV) vorherrschende Vorteile wie Leichtgewicht, mechanische Flexibi...

Neue Laser und Strahlquellen - alte und neue Risiken?

DEFF Research Database (Denmark)

Paasch, Uwe; Schwandt, Antje; Seeber, Nikolaus

2017-01-01

Die Entwicklungen im Bereich dermatologischer Laser, hochenergetischer Blitzlampen, LED und neuer Energie- und Strahlquellen der letzten Jahre haben gezeigt, dass mit neuen Wellenlängen, Konzepten und Kombinationen zusätzliche, zum Teil über den ästhetischen Bereich hinaus gehende therapeutische ...

Neue Shandite und Parkerite. Darstellung und röntgenographische Charakterisierung

OpenAIRE

Anusca, Irina

2009-01-01

Das Ziel dieser Arbeit war es, neue Verbindungen mit Shandit- und Parkeritstruktur zu darstellen und mittels röntgenographischen Methoden (Pulverdiffraktometrie und Einkristallanalyse), das thermische Verhalten durch DTA / DSC - Messungen und Elektronenmikroskopische Untersuchungen (REM, EDX) zu charakterisieren. Die vorliegende Arbeit ist wie folgt im zwei Themen gegliedert: Shandite und Parkerite. Der ersten Teil dieser Arbeit befaßt sich mit metallreichen ternären Chalkogeniden M3A2X2, ...

Study on Two-segment Electric-mechanical Composite Braking Strategy of Tracked Vehicle Hybrid Transmission System

OpenAIRE

Ma, Tian; Gai, Jiangtao; Ma, Xiaofeng

2010-01-01

In order to lighten abrasion of braking system of hybrid electric tracked vehicle, according to characteristic of hybrid electric transmission, electric-mechanical composite braking method was proposed. By means of analyzing performance of electric braking and mechanical braking and three-segment composite braking strategy, two-segment electric-mechanical composite braking strategy was put forward in this paper. Simulation results of Matlab/Simulink indicated that the two-segment electric-mec...

Zoophilie in Zoologie und Roman: Sex und Liebe zwischen Mensch und Tier bei Plutarch, Plinius dem Älteren, Aelian und Apuleius

Directory of Open Access Journals (Sweden)

Judith Hindermann

2011-09-01

Full Text Available Die Bedeutung von Zoophilie in der antiken Literatur wurde bislang – mit Ausnahme des Mythos – kaum untersucht. Überblickt man die überlieferten literarischen Texte, fällt auf, dass Zoophilie ausserhalb des Mythos vor allem in zwei literarischen Gattungen auftritt : Einerseits in den zoologischen Schriften von Plutarch, Plinius dem Älteren und Aelian, andererseits im antiken Roman, d.h. in den Metamorphosen des Apuleius und im pseudo-lukianischen Onos. In diesem Beitrag soll untersucht werden, welche Funktion Zoophilie in den beiden literarischen Gattungen hat und wie die Autoren die sexuelle Praktik bewerten, die weder nach griechischem noch römischen Recht strafbar war. Da Vorstellungen über Tiere eng mit Gender und Geschlechterhierarchien verbunden sind, soll insbesondere die Frage berücksichtigt werden, inwiefern männliche und weibliche Verhaltens- und Rollenzuschreibungen bei der Darstellung zoophiler Akte wirksam werden.

Die biene und ihre produkte in der kunst und im alltagsleben (Fruhchristliche und byzantinische Zeit

Directory of Open Access Journals (Sweden)

Liveri Angeliki

2010-01-01

Full Text Available Die vorliegende Arbeit ist in zwei Teile geteilt: den kunst- und kulturhistorischen Teil. Im ersten Teil werden Darstellungen uber Bienen Bienenzucht, Honig und Wachs seit der fruhchristlichen bis zur spatbyzantinischen Zeit vorgefuhrt. Daher ist es als Beitrag in der "Ikonographie" der Biene wahrend dieser Zeit zu verstehen. Im kulturhistorischen Teil werden Informationen uber die Bienenzucht, den Handel mit Honig und Wachs sowie ihre vielfaltige Anwendung von der byzantinischen Gesellschaft an Hand der primaren Quellen, des Standes der Forschung und der archaologischen Funden erwahnt. Damit ist erwunscht ein moglichst gutes Bild der byzantinischen Bienenzucht wieder zu geben und die Nutzung der Bienenprodukte in Byzanz anschaulich zu machen.

Vom Stabilitäts- und Wachstumsgesetz zum Wohlstands- und Nachhaltigkeitsgesetz

OpenAIRE

Koll, Willi

2016-01-01

Das Stabilitäts- und Wachstumsgesetz wird bald 50 Jahre alt. Neue Herausforderungen erfordern eine Wirtschaftspolitik, die weit über die Ziele des Gesetzes hinausweist. Sie muss wirtschaftliches Wachstum und Stabilität mit den Zielen fiskalischer, sozialer und ökologischer Nachhaltigkeit auf nationaler und europäischer Ebene verbinden. Der Autor gibt einen Über blick über solche umfassenden Zielsysteme und leitet daraus ab, wie eine derart erweiterte wirtschaftspolitische Agenda in ein Wohlst...

Steps towards a GaN nanowire based light emitting diode and its integration with Si-MOS technology

OpenAIRE

Limbach, Friederich

2012-01-01

In dieser Arbeit wird die Machbarkeit der Herstellung von Leuchtdioden Strukturen (LEDs) in einzelnen GaN Nanodrähten (ND) und deren Integration mit herkömmlicher Si Technologie untersucht. Hierzu wird zunächst ein generelles Verständnis des Wachstums von GaN ND erarbeitet und dargestellt. Es folgen Untersuchungen zum Einfluss von Dotierstoffen, wie z.B. Mg und Si, auf das Wachstum der ND. Dieses Wissen wird anschließend angewandt um Dotierübergänge in GaN ND herzustellen die nominell n-i-p ...

MnO-carbon hybrid nanofiber composites as superior anode materials for lithium-ion batteries

International Nuclear Information System (INIS)

Wang, Jian-Gan; Yang, Ying; Huang, Zheng-Hong; Kang, Feiyu

2015-01-01

MnO-carbon hybrid nanofiber composites are fabricated by electrospinning polyimide/manganese acetylacetonate precursor and a subsequent carbonization process. The composition, phase structure and morphology of the composites are characterized by scanning and transmission electron microscopy, X-ray diffraction and thermogravimetric analysis. The results indicate that the composites exhibit good nanofibrous morphology with MnO nanoparticles uniformly encapsulated by carbon nanofibers. The hybrid nanofiber composites are used directly as freestanding anodes for lithium-ion batteries to evaluate their electrochemical properties. It is found that the optimized MnO-carbon nanofiber composite can deliver a high reversible capacity of 663 mAh g −1 , along with excellent cycling stability and good rate capability. The superior performance enables the composites to be promising candidates as an anode alternative for high-performance lithium-ion batteries

Altautoverwertung zwischen Staat und Markt: Bedingungen und Potentiale zur Modernisierung von Lagerhaltung und Marketing gebrauchter Autoteile

OpenAIRE

Lucas, Rainer

2000-01-01

Das Arbeitspapier diskutiert vor dem Hintergrund veränderter gesetzlicher Rahmen-und Wettbewerbsbedingungen in der Autoverwertung Ziele und Maßnahmen zurStärkung kleiner und mittelständischer Verwertungsbetriebe. Der Bereich GebrauchteAutoteile wird im Rahmen eines regionalen Fallbeispiels einer tiefergehenden Analyseunterzogen. Hieraus werden Vorschläge zur regionalen Netzwerkbildung innerhalb derBranche und neue Dienstleistungsperspektiven abgeleitet. Ein wesentliches Koope-rationsfeld ist ...

High-Strength Hybrid Textile Composites with Carbon, Kevlar, and E-Glass Fibers for Impact-Resistant Structures. A Review.

Science.gov (United States)

Priyanka, P.; Dixit, A.; Mali, H. S.

2017-11-01

The paper reviews the characterization of high-performance hybrid textile composites and their hybridization effects of composite's behavior. Considered are research works based on the finite-element modeling, simulation, and experimental characterization of various mechanical properties of such composites.

Quality management and reduction of processing time through automised preforming in the rotorblade manufacturing for wind turbines; Teilautomatisiertes preforming zur Qualitaetssicherung und Verkuerzung von Fertigungszeiten bei der Herstellung von Rotorblaettern von Windenergieanlagen

Energy Technology Data Exchange (ETDEWEB)

Doersch, C.; Ohlendorf, J.H.; Gebauer, I.; Mueller, D.H. [Bremer Institut fuer Konstruktionstechnik, Universitaet Bremen (Germany); Weigel, L. [Abeking Rasmussen Rotec GmbH and Co. KG, Lemwerder (Germany)

2007-11-15

Rotor blades of wind turbines are mainly manufactured from fibre reinforced plastics. These materials show an excellent performance concering the ratio of stiffness and weight. Basically the composite material of rotor blades is made out of glass fibres and thermosetting material. But growing technological and economical requirements to rotor blades by off-shore-application, in particular through increasing rotor blade diameter, have to meet successful. Although reduction of processing time and increased quality of rotor blades play a major role. To achieve the increasing requirements of the rotor blade manufacturing the Bremen Institute for Engineering Design and the rotor blade manufacturer Abeking and Rasmussen Rotec GmbH are working together on the handling and manufacturing of textile preforms. Preforms are made out of stacked and bonded dry textile layers and deposited in the mould as one textile part. Preforming allows the parallel processing of some manufacturing steps. This shows great advantages in the production of fibre reinforced plastics because of the long curing time of the resin component. This parallel processing is required to reach the aim of decreased overall cycle time. This essay is focussing on the handling of textiles and the textile preforming. Summarised aspects of quality management and economics in textile preforming will be discussed with the aim of automising the preforming process. (Abstract Copyright [2007], Wiley Periodicals, Inc.) [German] Rotorblaetter von Windenergieanlagen werden aufgrund des guten Verhaeltnisses von Steifigkeit und Gewicht zu grossen Teilen aus Faserverbundwerkstoffen gefertigt. Dabei kommen hauptsaechlich Glasfasern (GF) als verstaerkendes Material sowie duroplastische Harze als Matrix zur Anwendung. Um die wachsenden Herausforderungen des Offshore-Einsatzes von Windenergieanlagen, insbesondere die steigende Rotorblattgroesse, technisch und wirtschaftlich erfolgreich bewaeltigen zu koennen, wird die

A Study of Hybrid Composite Hydroxyapatite (HA-Geopolymers as a Material for Biomedical Application

Directory of Open Access Journals (Sweden)

Saleha

2017-01-01

Full Text Available The main purpose of this research is to study the physical properties and microstructure characters of hybrid composites HA-geopolymers as a material for biomedical application. Hybrid composite HA–geopolymers were produced through alkaline activation method of metakaolin as a matrix and HA as the filler. HA was synthesized from eggshell particles by using a precipitation method. The addition of HA in metakaolin paste was varied from 0.5%, 1.0%, 1.5%, and 2.0% relative the weight of metakaolin. FTIR was used to examine the absorption bands the composites. X-ray diffraction (XRD was used to study the crystal structure of the starting and the resulting materials. Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS was used to investigate the surface morphology of the composites. The thermal properties of the samples was examined by means of Differential Scanning Calorimetry (DSC. Capacitance measurement was conducted to investigate the bioactive properties of HA. The study results suggest that hybrid composite HA-geopolymers has a potential to be applied as a biomedical such as biosensor material.

Alltagskulturen von Türken und Deutschen: Ähnlichkeiten und Unterschiede im Vergleich Daily Cultures of Turks and Germans: Similarities and Differences in Comparison

Directory of Open Access Journals (Sweden)

2013-09-01

Full Text Available Heute werden die Grenzen zwischen Länder entfernt, die Distanzen kürzer gemacht und damit gewinnt die Interaktion von Individuen aus verschiedenen Gesellschaften Intensität und Häufigkeit. Darüber hinaus, aufgrund der gesellschaftlichen Entwicklungen, die von Tag zu Tag den internationalen Beziehungen, Migrationen und der Kommunikation zwischen Länder verschiedene Dimensionen geben, ist die Konfrontation von vielen verschiedenen Kulturen eine unvermeidliche Tatsache geworden.In der modernen Welt, die sich schnell globalisiert, wenn die Konfrontation und Verschmelzung der Kulturen diskutiert werden, handelt es sich -ohne Zweifel- nicht um die ohne Rücksicht auf Mensch gebildeten, künstlichen Systeme, vielmehr um die Konfrontation und Verschmelzung von Menschen. Die Menschen konfrontieren immer mit Situationen, in denen sie mit ihren einzigartigen Werturteile, Gewohnheiten und Lebensweisen kommunizieren zu brauchen, die sie im Zusammenhang mit den Strukturen und Eigenschaften ihrer Gesellschaft erwerben und als dessen Folge, die sowohl von sich selbst als Individuen, als auch von ihrer Gesellschaft abhängigen Merkmale beinhalten. Während dieser Interaktion existieren sie mit ihren „Alltagskulturen“, die nicht vernachlässigt werden können, um aus menschlichen Beziehungen einen Sinn zu bekommen. Die erfolgreiche Durchführung der Kommunikation zwischen Menschen hängt fest nicht nur auf die korrekte Verwendung der Sprache, sondern auch darauf, gegenüber den „Alltagskulturen“ der fremden Gesellschaften gastfreundlich zu sein und sie richtig zu verstehen und interpretieren. Auch die Globalisierung der Welt und der rasche Fortschritt in Technologie zeigen, dass es von großer Bedeutung ist, die als Folge der häufigen Konfrontation verschiedener Alltagskulturen auftretenden, eventuellen Missverständnisse und Kommunikationsmängel zu verringern, und damit eine interkulturelle Kompetenz zu entwickeln.In dieser Arbeit werden daher

A Randomized 10-year Prospective Follow-up of Class II Nanohybrid and Conventional Hybrid Resin Composite Restorations

DEFF Research Database (Denmark)

van Dijken, Jan Wv; Pallesen, Ulla

2014-01-01

Purpose: To evaluate the 10-year durability of a nanohybrid resin composite in Class II restorations in a randomized controlled intraindividual comparison with its conventional hybrid resin composite predecessor. Materials and Methods: Each of 52 participants received at least two Class II...... restorations that were as similar as possible. The cavities were chosen at random to be restored with a nanohybrid resin composite (Excite/Tetric EvoCeram (TEC); n = 61) and a conventional hybrid (Excite/Tetric Ceram (TC); n = 61). The restorations were evaluated with slightly modified USPHS criteria...... investigated resin composites. Conclusion: The nanohybrid and the conventional hybrid resin composite showed good clinical effectiveness in extensive Class II restorations during the 10-year study....

Technology and globalization: the 15th World Petroleum Congress as viewed by German industry; Technologie und Globalisierung: Der 15. Welt-Erdoel-Kongress aus deutscher Sicht

Energy Technology Data Exchange (ETDEWEB)

Weitkamp, J. [Stuttgart Univ. (Germany). Inst. fuer Technische Chemie I

1998-03-01

For the 15th World Petroleum Congress, held from 12 to 16 October 1997 in Peking, the programme committee had chosen the following central motto: `Technology and globalization - Leading the Petroleum Industry into the 21st Century`. For the petroleum and natural gas industry, this congress represents the most important international forum for discussing technical, economic, and increasingly also ecological issues. (orig./HS) [Deutsch] Fuer den 15. Welt-Erdoel-Kongress, der vom 12. bis 16. Oktober 1997 in Peking abgehalten wurde, hatte das Programmkomitee als Leitthema `Technology and Globalisation - Leading the Petroleum Industry into the 21st Century` gewaehlt. Der Kongress stellt fuer die Erdoel- und Erdgasindustrie das bedeutendste internationale Forum fuer eine Diskussion technischer, oekonomischer und zunehmend auch oekologischer Fragen. (orig./HS)

Microstructural evolution and mechanical properties of Mg composites containing nano-B4C hybridized micro-Ti particulates

International Nuclear Information System (INIS)

Sankaranarayanan, S.; Sabat, R.K.; Jayalakshmi, S.; Suwas, S.; Gupta, M.

2014-01-01

In this work, the microstructural evolution and mechanical properties of extruded Mg composites containing micro-Ti particulates hybridized with varying contents of nano-B 4 C are investigated, and compared with Mg-5.6Ti. Microstructural characterization showed the presence of uniformly distributed micro-Ti particles embedded with nano-B 4 C particulates that resulted in significant grain refinement. Electron back scattered diffraction (EBSD) analyses of Mg-(5.6Ti + x-B 4 C) BM hybrid composites showed that the addition of hybridized particle resulted in relatively more recrystallized grains, realignment of basal planes and extension of weak basal fibre texture when compared to Mg-5.6Ti. The evaluation of mechanical properties indicated improved strength with ductility retention in Mg-(5.6Ti + x-B 4 C) BM hybrid composites. When compared to Mg-5.6Ti, the superior strength properties of the Mg-(5.6Ti + x-B 4 C) BM hybrid composites are attributed to the presence of nano-reinforcements, the uniform distribution of the hybridized particles, better interfacial bonding between the matrix and the reinforcement particles and the matrix grain refinement achieved by nano-B 4 C addition. The ductility enhancement obtained in hybrid composites can be attributed to the fibre texture spread and favourable basal plane orientation achieved due to nano B 4 C addition. - Highlights: • Micro-Ti particulates are hybridized with varying weight fractions of nano-B 4 C. • The hybrid mixture was used as hybrid reinforcements in magnesium. • Microstructure and mechanical properties of Mg-(5.6Ti + x-B 4 C) BM are compared with Mg-5.6Ti. • Electron back scattered diffraction (EBSD) analysis conducted to study the microtexture evolution

Marktkonstitution und Regulierung der unabhängigen Film- und Fernsehproduktion : Staat, Verbände und Gewerkschaften im deutsch-britischen Vergleich

OpenAIRE

Elbing, Sabine; Voelzkow, Helmut

2006-01-01

"In einem internationalen Vergleich von Deutschland und Großbritannien wird untersucht, welche Beiträge die staatliche Politik und die Wirtschafts- und Sozialpartner (Wirtschafts- und Arbeitgeberverbände sowie Gewerkschaften) zur Förderung der unabhängigen Film- und Fernsehproduktion leisten. Es wird gezeigt, dass die britische Medienpolitik die Position der unabhängigen Film- und Fernsehproduktion gegenüber den Fernsehsendern gestärkt hat. In Deutschland hat die Medienpolitik darauf verzicht...

Der Terminator und die Femme fatale. Gender im Genre-Kino The Terminator and the Femme Fatale: Gender in Genre Cinema

Directory of Open Access Journals (Sweden)

Rochus Wolff

2005-03-01

Full Text Available Mit Hollywood hybrid legen Claudia Liebrand und Ines Steiner einen äußerst lesenswerten Sammelband vor, in dem aus unterschiedlichen Blickwinkeln Hollywoodfilme der vergangenen Jahre untersucht wurden. Im Zentrum stehen dabei stets die komplexen Wechselwirkungen zwischen Genre und Gender. Von wenigen Schwächen abgesehen, gelingen den Autor/-innen dabei durchweg überzeugende Analysen.Claudia Liesbrand and Ines Steiner’s very worth reading Hollywood hybrid is a collected volume in which Hollywood films of recent years are examined from various angles. Central to the text is the continually complex interaction between genre and gender. With this, the authors enjoy, a few weaknesses aside, ongoing success.

Bestimmung der optimalen Array-Apertur für die Ultraschallprüfung von faserverstärkten Kunststoffen

OpenAIRE

Kurras, Martin

2017-01-01

Für die zerstörungsfreie Prüfung von Kohlenstofffaserverbundwerkstoffen (CFK) wird häufig die Ultraschallprüfung verwendet. Neben dem klassischen Ultraschallverfahren findet dabei auch die Phased Array Technologie Anwendung. Hierbei wird zwischen zwei Verfahren unterschieden: dem handelsüblichen Phased Array oder Conventional Phased Array (CPA) und dem tomographischen Sampling Phased Array (SPA). Der Einsatz von Phased Arrays im Zusammenhang mit Linear-Scan-Technik und das sich daraus ergeben...

Das Geschäftsmodell von Retail Banken im Wandel der Digitalisierung

OpenAIRE

Messikommer, Cédric

2016-01-01

Der Prozess der Digitalisierung führt in unterschiedlichen Branchen zu tiefgreifenden Veränderungen. Dazu gehört auch der Finanzsektor, dessen Umfeld von erodierenden Margen und Tiefstzinsen geprägt ist. Die Digitalisierung hat weitreichende Auswirkungen auf die Geschäftsmodelle von Banken und speziell von Retail Banken. Deren Basisdienstleistungen werden zunehmend von neuen Mitbewerbern mit modernster Internet-Technologie angeboten. Damit sind wesentliche Teile der Wertschöpfungskette von Re...

A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites

Directory of Open Access Journals (Sweden)

Naheed Saba

2014-08-01

Full Text Available The increasing demand for greener and biodegradable materials leading to the satisfaction of society requires a compelling towards the advancement of nano-materials science. The polymeric matrix materials with suitable and proper filler, better filler/matrix interaction together with advanced and new methods or approaches are able to develop polymeric composites which shows great prospective applications in constructions and buildings, automotive, aerospace and packaging industries. The biodegradability of the natural fibers is considered as the most important and interesting aspects of their utilization in polymeric materials. Nanocomposite shows considerable applications in different fields because of larger surface area, and greater aspect ratio, with fascinating properties. Being environmentally friendly, applications of nanocomposites offer new technology and business opportunities for several sectors, such as aerospace, automotive, electronics, and biotechnology industries. Hybrid bio-based composites that exploit the synergy between natural fibers in a nano-reinforced bio-based polymer can lead to improved properties along with maintaining environmental appeal. This review article intended to present information about diverse classes of natural fibers, nanofiller, cellulosic fiber based composite, nanocomposite, and natural fiber/nanofiller-based hybrid composite with specific concern to their applications. It will also provide summary of the emerging new aspects of nanotechnology for development of hybrid composites for the sustainable and greener environment.

Mechanical Properties of SiC, Al2O3 Reinforced Aluminium 6061-T6 Hybrid Matrix Composite

Science.gov (United States)

Murugan, S. Senthil; Jegan, V.; Velmurugan, M.

2018-04-01

This paper contains the investigation of tensile, compression and impact characterization of SiC, Al2O3 reinforced Aluminium 6061-T6 matrix hybrid composite. Hybrid matrix composite fabrication was done by stir casting method. An attempt has been made by keeping Al2O3 percentage (7%) constant and increasing SiC percentage (10, 15, and 20%). After fabricating, the samples were prepared and tested to find out the various mechanical properties like tensile, compressive, and impact strength of the developed composites of different weight % of silicon carbide and Alumina in Aluminium alloy. The main objective of the study is to compare the values obtained and choose the best composition of the hybrid matrix composite from the mechanical properties point of view.

A study on flexural and water absorption of surface modified rice husk flour/E-glass/polypropylene hybrid composite

Science.gov (United States)

Rassiah, K.; Sin, T. W.; Ismail, M. Z.

2016-10-01

This work is to study the effects of rice husk (RH)/E-Glass (EG)/polypropylene (PP) hybrid composites in terms of flexural and water absorption properties. The tests conducted are the flexural test and also the water absorption test using two types of water: distilled and sea water. The hybrid composites are prepared with various ratios of fibre weight fractions and the rice husk is treated using 2% Sodium Hydroxide (NaOH) to improve interaction and adhesion between the non-polar matrix and the polar lignocellulosic fibres. It was found that the content of rice husk/E-Glass fillers affected the structural integrity and flexural properties of hybrid composites. In addition, a higher ratio of rice husk contributes to higher water absorption in the hybrid composites.

Sport und soziale Integration

OpenAIRE

Turan, Günes

2012-01-01

Sport und soziale Integration : Chancen, Probleme und Perspektiven für Städte und Kommunen ; Tagungsband der gleichnamigen Tagung am 28. und 29. Juni 2011 in Augsburg / Helmut Altenberger ... (Hrsg.). - Hamburg : Feldhaus, Ed. Czwalina, 2012. - 104 S. - (Sportwissenschaft und Sportpraxis ; 161)

Kommunikation und Lernen in partizipativen kulturellen und medialen Räumen

Directory of Open Access Journals (Sweden)

Elke Zobl

2012-12-01

Full Text Available Eine der interessantesten Transformationen in der Jugendkultur seit den 1990er-Jahren ist die steigende Zahl vor allem an Mädchen und jungen Frauen, die zu aktiven kulturellen Produzentinnen wurden. In diesem Artikel wird argumentiert, dass sie mit ihren eigenen kulturellen Produktionen und Netzwerken neue soziale und mediale Räume öffnen, die durch eine partizipative Kultur, selbst-organisiertes Lernen in informellen Kontexten und lokale, transnationale und virtuelle Vernetzung und Kommunikation geprägt sind. Ziel dieses Artikels ist es, das Kommunizieren und Lernen in partizipativen kulturellen (bzw. sozialen und medialen Räumen am Beispiel queer-feministischer Festivals – sogenannter „Ladyfeste“ – darzustellen und ihre Bedeutung in (medien-pädagogischen Kontexten zu diskutieren.One of the most interesting transformations in youth culture since the 1990s is the growing number of girls and young women as active cultural producers. By creating their own cultural productions and networks, this article argues, that they open up new cultural (i. e. social and media spaces which are characterized by a participatory culture, self-organised learning and local, transnational and virtual networks and communication. Taking the example of queer-feminist festivals (so called “Ladyfests”, the aim of this article is to discuss communication and learning in participatory cultural and media spaces and their meaning in the context of (media-pedagogy.

UNITED STATES AND GERMAN BILATERAL AGREEMENT ON REMEDIATION OF HAZARDOUS WASTE SITES

Science.gov (United States)

The U.S. Environmental Protection Agency (EPA) and Germany's Bundesministerium fur Forschung und Technologie (BMFT) are involved in a collaborative effort called the U.S. and German Bilateral Agreement on Remediation of Hazardous Waste Sites. he purpose of this interim status rep...

Single step synthesis of chitin/chitosan-based graphene oxide–ZnO hybrid composites for better electrical conductivity and optical properties

International Nuclear Information System (INIS)

Anandhavelu, S.; Thambidurai, S.

2013-01-01

Highlights: ► UV absorption at 260–360 nm confirmed strong binding of ZnO with chitosan–GO sheets. ► Chitin-based GO–ZnO shows higher electrical conductivity than chitosan-based GO–ZnO. ► Chitin-based GO–ZnO will useful in sensing, catalysis and energy storage applications. -- Abstract: We synthesized two composites/hybrid composites with a graphene oxide (GO)/mixed GO–ZnO filler using either a chitin or a chitosan matrix. Fourier transform infrared spectroscopy analysis confirmed that chitin had been converted to chitosan during matrix fabrication because only chitosan, ZnO and GO were shown to be present in the composites/hybrid composites. Raman spectroscopy indicated the display of D and G bands at 1345 cm −1 and 1584 cm −1 , respectively. UV absorption peaks appeared at 260–360 nm and 201 nm in both hybrid composites, which indicate a strong binding of ZnO within the chitosan–GO sheets. High resolution scanning electron microscopy and atomic force microscopy studies demonstrated that on a molecular scale ZnO was well dispersed in the hybrid composites. Impedance spectroscopy and a four-probe resistivity method were used for room temperature electrical conductivity measurements. The electrical conductivity of the chitin-based GO–ZnO hybrid composites was estimated to be ∼5.94 × 10 6 S/cm and was greater than that of the chitosan-based GO–ZnO hybrid composite (∼4.13 × 10 6 S/cm). The chitin-based GO–ZnO hybrid composite had a higher optical band gap (3.4 eV) than the chitosan-based GO–ZnO hybrid composite (3.0 eV). The current–voltage measurement showed that electrical sheets resistance of the chitosan-based composites decreased with formation of ZnO

Studies on Effective Elastic Properties of CNT/Nano-Clay Reinforced Polymer Hybrid Composite

Science.gov (United States)

Thakur, Arvind Kumar; Kumar, Puneet; Srinivas, J.

2016-02-01

This paper presents a computational approach to predict elastic propertiesof hybrid nanocomposite material prepared by adding nano-clayplatelets to conventional CNT-reinforced epoxy system. In comparison to polymers alone/single-fiber reinforced polymers, if an additional fiber is added to the composite structure, it was found a drastic improvement in resultant properties. In this regard, effective elastic moduli of a hybrid nano composite are determined by using finite element (FE) model with square representative volume element (RVE). Continuum mechanics based homogenization of the nano-filler reinforced composite is considered for evaluating the volumetric average of the stresses and the strains under different periodic boundary conditions.A three phase Halpin-Tsai approach is selected to obtain the analytical result based on micromechanical modeling. The effect of the volume fractions of CNTs and nano-clay platelets on the mechanical behavior is studied. Two different RVEs of nano-clay platelets were used to investigate the influence of nano-filler geometry on composite properties. The combination of high aspect ratio of CNTs and larger surface area of clay platelets contribute to the stiffening effect of the hybrid samples. Results of analysis are validated with Halpin-Tsai empirical formulae.

International projects of the Chair for waste and material flow management in the period 2010-2014; Internationale Projekte des Lehrstuhls Abfall- und Stoffstromwirtschaft im Zeitraum 2010-2014

Energy Technology Data Exchange (ETDEWEB)

Nelles, Michael (ed.)

2015-07-01

Kreislaufwirtschaft einen wichtigen Beitrag leisten. Fuer Deutschland laesst sich hier, trotz der anspruchsvollen Ziele, eine positive Zwischenbilanz ziehen. Insbesondere die positiven oekologischen Effekte der Vermeidung, Verwertung und Beseitigung von Abfaellen sind durch zahlreiche wissenschaftliche Studien belegt. Waehrend sich die Kreislaufwirtschaft in Deutschland gut entwickelt hat, befinden sich viele Laender auf dieser Welt noch am Anfang einer nachhaltigen abfallwirtschaftlichen Entwicklung. Unser Lehrstuhl Abfall- und Stoffstromwirtschaft an der Agrar- und Umweltwissenschaftlichen Fakultaet der Universitaet Rostock engagiert sich seit ueber 15 Jahren im internationalen Technologie- und Wissenstransfer. Die regionalen Schwerpunkte sind dabei der arabische und asiatische Raum (insb. China) sowie seit einigen Jahren die baltischen Laender, Osteuropa und Suedamerika. Oft stand in den Projekten im Vordergrund, wichtige Entscheidungstraeger ueber den Stand der Technik zu informieren sowie moegliche administrative Loesungen und angepasste technische Loesungen gemeinsam zu erarbeiten und zu implementieren. Darueber hinaus wurden klassische F and E-Projekte in den genannten Regionen bearbeitet. Im Rahmen von studentischen Arbeiten wurden auch Studien in weiteren Laendern u.a. in Vietnam und Chile durchgefuehrt.

The Mechanical Properties and Microstructure Characters of Hybrid Composite Geopolymers-Pineapple Fiber Leaves (PFL)

Science.gov (United States)

Amalia, N.; Hidayatullah, S.; Nurfadilla; Subaer

2017-03-01

The objective of this research is to study the influence of organic fibers on the mechanical properties and microstructure characters of hybrid composite geopolymers-pineapple fibers (PFL). Geopolymers were synthesized by using alkali activated of class C-fly ash added manually with short pineapple fiber leaves (PFL) and then cured at 60°C for 1 hour. The resulting composites were stored in open air for 28 days prior to mechanical and microstructure characterizations. The samples were subjected to compressive and flexural strength measurements, heat resistance as well as acid attack (1M H2SO4 solution). The microstructure of the composites were examined by using Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS). The measurement showed that the addition of pineapple fibers was able to improve the compressive and flexural strength of geopolymers. The resulting hybrid composites were able to resist fire to a maximum temperature of 1500°C. SEM examination showed the presence of good bond between geopolymer matrix and pineapple fibers. It was also found that there were no chemical constituents of geopolymers leached out during acid liquid treatment. It is concluded that hybrid composite geopolymers-pineapple fibers are potential composites for wide range applications.

Emission factors and chemical characterisation of fine particulate emissions from modern and old residential biomass heating systems determined for typical load cycles; Emissionsfaktoren und chemische Charakterisierung von Feinstaubemissionen moderner und alter Biomasse-Kleinfeuerungen ueber typische Tageslastverlaeufe

Energy Technology Data Exchange (ETDEWEB)

Kelz, Joachim [BIOENERGY 2020+ GmbH, Graz (Austria); Brunner, Thomas; Obernberger, Ingwald [BIOENERGY 2020+ GmbH, Graz (Austria); Technische Universitaet Graz, Institut fuer Prozess- und Partikeltechnik, Graz (Austria); BIOS BIOENERGIESYSTEME GmbH, Graz (Austria)

2012-12-15

concerning gaseous and PM emissions of different old and modern biomass combustion systems over whole day operation cycles are now available. Derived from these data, correlations between burnout quality, particulate emissions as well as particle composition of the PM emissions can be deduced. (orig.) [German] Es ist allgemein bekannt, dass es signifikante Unterschiede bezueglich partikelfoermiger Emissionen von modernen und alten sowie automatisch und nicht automatisch geregelten Biomasse-Kleinfeuerungsanlagen gibt. Die Unterschiede beziehen sich einerseits auf die Hoehe der Partikelemission und andererseits auf deren chemische Zusammensetzung. Um Emissionsfaktoren fuer partikelfoermige Emissionen ueber typische realitaetsnahe Tageslastverlaeufe zu bestimmen und die Feinstaubemissionen chemisch zu charakterisieren, wurde ein Projekt an der BIOENERGY 2020+ GmbH, Graz, Oesterreich, in Kooperation mit dem Institut fuer Prozess- und Partikeltechnik, Technische Universitaet Graz, Oesterreich, initiiert. Fuenf moderne, dem aktuellen Stand der Technik entsprechende, Biomasse-Kleinfeuerungen sowie zwei Altanlagen, die den aktuellen Anlagenbestand widerspiegeln, wurden im Zuge von Testlaeufen an einem Teststand untersucht. Dabei wurden alle relevanten Betriebsparameter der Biomasse-Kleinfeuerungen sowie die im Zuge des Verbrennungsprozesses entstehenden gas- und partikelfoermigen Emissionen kontinuierlich gemessen und aufgezeichnet. Des Weiteren wurden Partikelemissionsproben gezogen und anschliessend chemisch analysiert. Fuer die Testlaeufe wurden typische Tageslastverlaeufe, die den Betrieb dieser Feuerungen in der Praxis abbilden, beruecksichtigt. Dabei wurde zwischen automatisch beschickten und automatisch geregelten Kesseln, manuell beschickten und automatisch geregelten Kesseln sowie manuell beschickten Naturzugoefen unterschieden. Die Ergebnisse zeigen einen deutlichen Zusammenhang zwischen den gasfoermigen Emissionen, die durch unvollstaendigen Gasphasenausbrand (CO- und org

Synthesis and mechanical behavior of carbon nanotube-magnesium composites hybridized with nanoparticles of alumina

International Nuclear Information System (INIS)

Thakur, Sanjay Kumar; Srivatsan, T.S.; Gupta, Manoj

2007-01-01

Carbon nanotubes reinforced magnesium based composites were prepared with diligence and care using the powder metallurgy route coupled with rapid microwave sintering. Nanometer-sized particles of alumina were used to hybridize the carbon nanotubes reinforcement in the magnesium matrix so as to establish the intrinsic influence of hybridization on mechanical behavior of the resultant composite material. The yield strength, tensile strength and strain-to-failure of the carbon nanotubes-magnesium composites were found to increase with the addition of nanometer-sized alumina particles to the composite matrix. Scanning electron microscopy observations of the fracture surfaces of the samples deformed and failed in uniaxial tension revealed the presence of cleavage-like features on the fracture surface indicative of the occurrence of locally brittle fracture mechanism in the composite microstructure

Ausbildung und Erwartungshaltung

Science.gov (United States)

Knoke, Holger

1997-09-01

werden Geologiestudenten zeitgemäß ausgebildet? Wird in der Angewandten Geologie das gelehrt, was in Wirtschaftsunternehmen an Wissen von einem Geologen erwartet wird? Erfolgt die spezielle Ausbildung zum Hydrogeologen fundiert und umfassend? Eine Antwort auf diese Fragen kann sicherlich nicht allumfassend gegeben werden, da sie von der jeweiligen Sichtweise abhängig ist. Ein Geologieprofessor wird die Ausbildung seiner Studenten im Großen und Ganzen als zeitgemäß einstufen, eventuell hier und da Verbesserungen für möglich halten. Auffällig ist die hohe Anzahl der in den letzten Jahren bereits geänderten oder zur Änderung anstehenden Studienordnungen. Es zeigt, daß die Straffung des Studiums sowie eine zumindest teilweise neue Wichtung der Schwerpunkte notwendig war bzw. ist, wobei im allgemeinen eine höhere Stundenzahl in den Grundlagenfächern Mathematik, Physik und Chemie angesetzt wird. Betrachtet man die Gesamtstundenzahlen der alten und der reformierten Studienordnungen, kann jedoch von einer Kürzung der Pflichtstunden in den meisten Fällen nicht die Rede sein. Eine grundlegende Reform des Geologiestudiums ist zur Zeit nicht zu erkennen, eher eine Verschulung des Studienganges. Die Entwicklung scheint zur Zeit weg von der freien Kurswahl und hin zu Modulangeboten mit vorgegebenen Kursen und Reihenfolgen zu gehen. Für die Hydrogeologie-Professoren ist es sicherlich nicht einfach zu entscheiden und in ihrem Kollegenkreis durchzusetzen, was aus dem generellen geowissenschaftlichen Kursangebot für einen Hydrogeologen notwendig oder aber entbehrlich ist. Genügen die Grundlagen der Paläontologie und der Mineralogie? Kann man ganz darauf verzichten? Was erwarten Behörden und Wirtschaftsunternehmen an allgemeinen und Spezialkenntnissen? Geologische Landesämter z. B. wollen, pauschal betrachtet, Geologen alten Stils. Ist ausdrücklich ein Angewandter Geologe oder speziell ein Hydrogeologe erwünscht, soll dieser die Spezialkenntnisse zus

[Die baltischen Lande im Zeitalter der Reformation und Konfessionalisierung. Livland, Estland, Ösel, Ingermanland, Kurland und Letgallen. Stadt, Land und Konfession 1500-1721. 2. und 3. Teil] / Anti Selart

Index Scriptorium Estoniae

Selart, Anti, 1973-

2012-01-01

Arvustus: Die baltischen Lande im Zeitalter der Reformation und Konfessionalisierung. Livland, Estland, Ösel, Ingermanland, Kurland und Letgallen. Stadt, Land und Konfession 1500-1721. Hrsg. von Matthias Asche, Werner Buchholz, Anton Schindling. 2. und 3. Teil.

Experimental Characterization of Aluminum-Based Hybrid Composites Obtained Through Powder Metallurgy

Science.gov (United States)

Marcu, D. F.; Buzatu, M.; Ghica, V. G.; Petrescu, M. I.; Popescu, G.; Niculescu, F.; Iacob, G.

2018-06-01

The paper presents some experimental results concerning fabrication through powder metallurgy (P/M) of aluminum-based hybrid composites - Al/Al2O3/Gr. In order to understand the mechanisms that occur during the P/M processes of obtaining Al/Al2O3/Gr composite, we correlated the physical characteristics with their micro-structural characteristics. The characterization was performed using analysis techniques specific for P/M process, SEM-EDS and XRD analyses. Micro-structural characterization of the composites has revealed fairly uniform distribution this resulting in good properties of the final composite material.

Economical Fabrication of Thick-Section Ceramic Matrix Composites

Science.gov (United States)

Babcock, Jason; Ramachandran, Gautham; Williams, Brian; Benander, Robert

2010-01-01

A method was developed for producing thick-section [>2 in. (approx.5 cm)], continuous fiber-reinforced ceramic matrix composites (CMCs). Ultramet-modified fiber interface coating and melt infiltration processing, developed previously for thin-section components, were used for the fabrication of CMCs that were an order of magnitude greater in thickness [up to 2.5 in. (approx.6.4 cm)]. Melt processing first involves infiltration of a fiber preform with the desired interface coating, and then with carbon to partially densify the preform. A molten refractory metal is then infiltrated and reacts with the excess carbon to form the carbide matrix without damaging the fiber reinforcement. Infiltration occurs from the inside out as the molten metal fills virtually all the available void space. Densification to thick-section components required modification of the conventional process conditions, and the means by which the large amount of molten metal is introduced into the fiber preform. Modification of the low-temperature, ultraviolet-enhanced chemical vapor deposition process used to apply interface coatings to the fiber preform was also required to accommodate the high preform thickness. The thick-section CMC processing developed in this work proved to be invaluable for component development, fabrication, and testing in two complementary efforts. In a project for the Army, involving SiC/SiC blisk development, nominally 0.8 in. thick x 8 in. diameter (approx. 2 cm thick x 20 cm diameter) components were successfully infiltrated. Blisk hubs were machined using diamond-embedded cutting tools and successfully spin-tested. Good ply uniformity and extremely low residual porosity (41 ksi (approx. 283 MPa) flexural strength.

Enhanced mechanical properties and biocompatibility of novel hydroxyapatite/TOPAS hybrid composite for bone tissue engineering applications.

Science.gov (United States)

Ain, Qurat Ul; Khan, Ahmad Nawaz; Nabavinia, Mahboubeh; Mujahid, Mohammad

2017-06-01

The bioactivity and mechanical properties of hybrid composites of hydroxyapatite (HA) in cyclic olefinic copolymer (COC) also known commercially as TOPAS are investigated, first time, for regeneration and repair of the bone tissues. HA is synthesized to obtain the spherically shaped nanoparticles in the size range of 60±20nm. Various concentrations of HA ranging from 1 to 30wt% are dispersed in TOPAS using sodium dodecyl sulfate (SDS) coupling agent for better dispersion and interaction of hydrophilic HA with hydrophobic TOPAS. Scanning electron microscope shows the uniform dispersion of HA≤10wt% in TOPAS and at higher concentrations >10wt%, agglomeration occurs in the hybrid composites. Tunable mechanical properties are achieved as the compressive modulus and strength are increased around 140% from 6.4 to 15.3MPa and 185% from 0.26 to 0.74MPa, respectively. Such increase in the mechanical properties of TOPAS is attributed to the anchoring of the polymer chains in the vicinity of HA nanoparticles owing to better dispersion and interfacial interactions. In comparison to neat TOPAS, hybrid composites of TOPAS/HA promoted the cell adhesion and proliferation significantly. The cell density and proliferation of TOPAS/HA hybrid composites is enhanced 9 and 3 folds, respectively, after 1day culturing in preosteoblasts cells. Moreover, the morphology of cells changed from spherical to flattened spread morphology demonstrating clearly the migration of the cells for the formation of interconnected cellular network. Additionally, very few dead cells are found in hybrid composites showing their cytocompatibility. Overall, the hybrid composites of TOPAS/HA exhibited superior strength and stiffness along with enhanced cytocompatibility for bone tissue engineering applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Dry Process for Manufacturing Hybridized Boron Fiber/Carbon Fiber Thermoplastic Composite Materials from a Solution Coated Precursor

Science.gov (United States)

Belvin, Harry L. (Inventor); Cano, Roberto J. (Inventor)

2003-01-01

An apparatus for producing a hybrid boron reinforced polymer matrix composite from precursor tape and a linear array of boron fibers. The boron fibers are applied onto the precursor tapes and the precursor tape processed within a processing component having an impregnation bar assembly. After passing through variable-dimension forming nip-rollers, the precursor tape with the boron fibers becomes a hybrid boron reinforced polymer matrix composite. A driving mechanism is used to pulled the precursor tape through the method and a take-up spool is used to collect the formed hybrid boron reinforced polymer matrix composite.

Mediendidaktik und Wissensmanagement

Directory of Open Access Journals (Sweden)

Gabi Reinmann-Rothmeier

2002-10-01

Full Text Available Mediendidaktik und Wissensmanagement – das ist auf den ersten Blick ein ungleiches Paar: Die Mediendidaktik ist eine Teildisziplin der (Medien- Pädagogik, während Wissensmanagement ein genuin wirtschaftliches Thema mit betriebswirtschaftlichen Akzenten ist. Annäherungen zwischen der Mediendidaktik und Wissensmanagement gibt es zum einen durch den sog. E-Learning-Trend seitens der Wirtschaft, der mediendidaktisches Wissen und Können auf den Plan ruft, zum anderen durch wachsendes Interesse am Thema Wissensmanagement seitens der Pädagogik. Der Beitrag beschreibt sowohl für das E-Learning als auch für das Wissensmanagement aus pädagogisch-psychologischer Sicht jeweils ein Orientierungsmodell; beide Modelle machen die Berührungspunkte zwischen Mediendidaktik und Wissensmanagement deutlich. Neben einem Überblick über wirtschaftliche Argumente für eine Verschmelzung von E-Learning und Wissensmanagement werden aufbauend auf den beiden Orientierungsmodellen theoretische und praktische Verbindungslinien zwischen E-Learning und Wissensmanagement sowie die Rolle der Mediendidaktik in dem daraus entstehenden Wechselverhältnis herausgearbeitet.

New aromatic polyesterpolyols derived from PET industrial wastes

OpenAIRE

Kornejew, Eckhart; Dimitrov, Kiril; Herzog, Michael

2014-01-01

China hat den globalen Recycling-Markt letztes Jahr mit der Ankündigung geschockt, nicht länger niederwertige Qualitäten von rezyklierbaren Abfällen von ausländischen Exporteuren zu akzeptieren – die so genannte „Aktion Grüner Zaun“ startete zu Beginn des Jahres 2013. Die Antwort im Westen sollte ein Innovations- und Investitionsschub in Recycling-Technologie zur Entwicklung eines erfolgreichen Recycling-Marktes sein. Dies sollte hochentwickelte Behandlungstechnologien und installierte Anlage...

Hybrid and hierarchical nanoreinforced polymer composites: Computational modelling of structure–properties relationships

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Dai, Gaoming

2014-01-01

by using computational micromechanical models. It is shown that while glass/carbon fibers hybrid composites clearly demonstrate higher stiffness and lower weight with increasing the carbon content, they can have lower strength as compared with usual glass fiber polymer composites. Secondary...... nanoreinforcement can drastically increase the fatigue lifetime of composites. Especially, composites with the nanoplatelets localized in the fiber/matrix interface layer (fiber sizing) ensure much higher fatigue lifetime than those with the nanoplatelets in the matrix....

Investigation of mechanical properties of hemp/glass fiber reinforced nano clay hybrid composites

Science.gov (United States)

Unki, Hanamantappa Ningappa; Shivanand, H. K.; Vidyasagar, H. N.

2018-04-01

Over the last twenty to thirty years composite materials have been used in engineering field. Composite materials possess high strength, high strength to weight ratio due to these facts composite materials are becoming popular among researchers and scientists. The major proportion of engineering materials consists of composite materials. Composite materials are used in vast applications ranging from day-to-day household articles to highly sophisticated applications. In this paper an attempt is made to prepare three different composite materials using e-glass and Hemp. In this present investigation hybrid composite of Hemp, Glass fiber and Nano clay will be prepared by Hand-layup technique. The glass fiber used in this present investigation is E-glass fiber bi-directional: 90˚ orientation. The composite samples will be made in the form of a Laminates. The wt% of nanoclay added in the preparation of sample is 20 gm constant. The fabricated composite Laminate will be cut into corresponding profiles as per ASTM standards for Mechanical Testing. The effect of addition of Nano clay and variation of Hemp/glass fibers will be studied. In the present work, a new Hybrid composite is developed in which Hemp, E glass fibers is reinforced with epoxy resin and with Nano clay.

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

International Nuclear Information System (INIS)

Alavudeen, A.; Rajini, N.; Karthikeyan, S.; Thiruchitrambalam, M.; Venkateshwaren, N.

2015-01-01

Highlights: • This paper is presents the fabrications of kenaf/banana fiber hybrid composites. • Effect of weaving pattern and random orientation on mechanical properties was studied. • Role of interfacial adhesion due to chemical modifications were analyzed with the aid of SEM. • Hybridization of kenaf and banana fibers in plain woven composites exhibits maximum mechanical strength. - Abstract: The present work deals with the effect of weaving patterns and random orientatation on the mechanical properties of banana, kenaf and banana/kenaf fiber-reinforced hybrid polyester composites. Composites were prepared using the hand lay-up method with two different weaving patterns, namely, plain and twill type. Of the two weaving patterns, the plain type showed improved tensile properties compared to the twill type in all the fabricated composites. Furthermore, the maximum increase in mechanical strength was observed in the plain woven hybrid composites rather than in randomly oriented composites. This indicates minimum stress development at the interface of composites due to the distribution of load transfer along the fiber direction. Moreover, alkali (NaOH) and sodium lauryl sulfate (SLS) treatments appear to provide an additional improvement in mechanical strength through enhanced interfacial bonding. Morphological studies of fractured mechanical testing samples were performed by scanning electron microscopy (SEM) to understand the de-bonding of fiber/matrix adhesion

Romanistik und gender studies

Directory of Open Access Journals (Sweden)

Susanne Schlünder

2000-11-01

Full Text Available Die beiden Bände bieten ein breites Spektrum von Beiträgen zur französischen, italienischen und spanischen Literaturwissenschaft. Gedankliche Grundlage der im einzelnen unterschiedlichen Ansätze und Zielsetzungen ist ein im Anschluß an Judith Butler gender-reflektierendes, diskursives Konzept von Geschlecht, dessen wissenschaftsgeschichtliche Herleitung und Perspektiven Renate Kroll einleitend darlegt. Die einzelnen Artikel beschäftigen sich zum einen mit literarischen Strategien, die Schriftstellerinnen vom Mittelalter bis zur Gegenwart erprobt haben, und hinterfragen dabei die Rolle weiblicher Autoren in Literaturgeschichte und Literaturgeschichtsschreibung. Zum anderen widmen sie sich den literarischen Inszenierungs- und Repräsentationsformen von Weiblichkeit und stellen darüber einen Bezug zur Lebenswelt der behandelten Autorinnen her.

Clinical performance of a hybrid resin composite with and without an intermediate layer of flowable resin composite: a 7-year evaluation

DEFF Research Database (Denmark)

van Dijken, Jan W V; Pallesen, Ulla

2011-01-01

The objective of this prospective clinical follow up was to evaluate the long term clinical performance of a hybrid resin composite in Class II restorations with and without intermediate layer of flowable resin composite....

The effect of soda immersion on nano hybrid composite resin discoloration

Directory of Open Access Journals (Sweden)

M. Chair Effendi

2014-03-01

Full Text Available Background: Composite resin is the tooth-colored restorative material which most of the people are fond of due to their aesthetic value. The composite resin discoloration may happen because of the intrinsic and extrinsic factors. Soda water is one of the beverages which can cause the composite resin discoloration. Purpose: The study was aimed to determine the effect of soda immersion on nano hybrid composite resin discoloration. Methods: The study was an experimental laboratory study using 100 shade A3 nano hybrid composite resin specimens with the diameter of 5 mm and density of 2mm. The samples were divided into 5 groups, each group was immersed in different beverages. The beverages were mineral water; lemon-flavored soda; strawberry-flavored soda; fruit punch-flavored soda; and orange-flavored soda for 3, 7, 14 and 21 days respectively, in the temperature of 37o C. The discoloration measurement utilizes Spectrophotometer, Vita Easy Shade, and uses CIEL*a*b* method. Results: The result showed that the duration of immersion in soda had an effect on the Nano hybrid composite resin discoloration. Strawberry and fruit punch- flavored soda were the most influential components toward the discoloration. Nevertheless, the generally-occurred discoloration was clinically acceptable (∆E ≤ 3,3. Conclusion: The study suggested that the soda immersion duration has effect on Nano hybrid composite resin discoloration.Latar belakang: Resin komposit adalah material sewarna gigi yang diminati masyarakat karena memiliki nilai estetik yang baik. Perubahan warna resin komposit dapat terjadi karena faktor intrinsik dan ekstrinsik. Minuman soda merupakan salah satu minuman yang dapat menyebabkan perubahan warna pada resin komposit. Tujuan: Tujuan dari penelitian ini untuk meneliti perubahan warna resin komposit nanohibrida akibat perendaman dalam minuman soda. Metode: Metode yang digunakan pada penelitian ini adalah eksperimental laboratorik dengan menggunakan

Optimizing Thermal-Elastic Properties of C/C–SiC Composites Using a Hybrid Approach and PSO Algorithm

Science.gov (United States)

Xu, Yingjie; Gao, Tian

2016-01-01

Carbon fiber-reinforced multi-layered pyrocarbon–silicon carbide matrix (C/C–SiC) composites are widely used in aerospace structures. The complicated spatial architecture and material heterogeneity of C/C–SiC composites constitute the challenge for tailoring their properties. Thus, discovering the intrinsic relations between the properties and the microstructures and sequentially optimizing the microstructures to obtain composites with the best performances becomes the key for practical applications. The objective of this work is to optimize the thermal-elastic properties of unidirectional C/C–SiC composites by controlling the multi-layered matrix thicknesses. A hybrid approach based on micromechanical modeling and back propagation (BP) neural network is proposed to predict the thermal-elastic properties of composites. Then, a particle swarm optimization (PSO) algorithm is interfaced with this hybrid model to achieve the optimal design for minimizing the coefficient of thermal expansion (CTE) of composites with the constraint of elastic modulus. Numerical examples demonstrate the effectiveness of the proposed hybrid model and optimization method. PMID:28773343

Hybrid waste filler filled bio-polymer foam composites for sound absorbent materials

Science.gov (United States)

Rus, Anika Zafiah M.; Azahari, M. Shafiq M.; Kormin, Shaharuddin; Soon, Leong Bong; Zaliran, M. Taufiq; Ahraz Sadrina M. F., L.

2017-09-01

Sound absorption materials are one of the major requirements in many industries with regards to the sound insulation developed should be efficient to reduce sound. This is also important to contribute in economically ways of producing sound absorbing materials which is cheaper and user friendly. Thus, in this research, the sound absorbent properties of bio-polymer foam filled with hybrid fillers of wood dust and waste tire rubber has been investigated. Waste cooking oil from crisp industries was converted into bio-monomer, filled with different proportion ratio of fillers and fabricated into bio-polymer foam composite. Two fabrication methods is applied which is the Close Mold Method (CMM) and Open Mold Method (OMM). A total of four bio-polymer foam composite samples were produce for each method used. The percentage of hybrid fillers; mixture of wood dust and waste tire rubber of 2.5 %, 5.0%, 7.5% and 10% weight to weight ration with bio-monomer. The sound absorption of the bio-polymer foam composites samples were tested by using the impedance tube test according to the ASTM E-1050 and Scanning Electron Microscope to determine the morphology and porosity of the samples. The sound absorption coefficient (α) at different frequency range revealed that the polymer foam of 10.0 % hybrid fillers shows highest α of 0.963. The highest hybrid filler loading contributing to smallest pore sizes but highest interconnected pores. This also revealed that when highly porous material is exposed to incident sound waves, the air molecules at the surface of the material and within the pores of the material are forced to vibrate and loses some of their original energy. This is concluded that the suitability of bio-polymer foam filled with hybrid fillers to be used in acoustic application of automotive components such as dashboards, door panels, cushion and etc.

Minimal invasive stabilization of osteoporotic vertebral compression fractures. Methods and preinterventional diagnostics; Minimal-invasive Stabilisierung osteoporotischer Wirbelkoerpereinbrueche. Methodik und praeinterventionelle Diagnostik

Energy Technology Data Exchange (ETDEWEB)

Grohs, J.G.; Krepler, P. [Orthopaedische Klinik, Universitaet Wien (Austria)

2004-03-01

Minimal invasive stabilizations represent a new alternative for the treatment of osteoporotic compression fractures. Vertebroplasty and balloon kyphoplasty are two methods to enhance the strength of osteoporotic vertebral bodies by the means of cement application. Vertebroplasty is the older and technically easier method. The balloon kyphoplasty is the newer and more expensive method which does not only improve pain but also restores the sagittal profile of the spine. By balloon kyphoplasty the height of 101 fractured vertebral bodies could be increased up to 90% and the wedge decreased from 12 to 7 degrees. Pain was reduced from 7,2 to 2,5 points. The Oswestry disability index decreased from 60 to 26 points. This effects persisted over a period of two years. Cement leakage occurred in only 2% of vertebral bodies. Fractures of adjacent vertebral bodies were found in 11%. Good preinterventional diagnostics and intraoperative imaging are necessary to make the balloon kyphoplasty a successful application. (orig.) [German] Minimal-invasive Stabilisierungen stellen eine Alternative zur bisherigen Behandlung osteoporotischer Wirbelfrakturen dar. Die Vertebroplastie und die Ballonkyphoplastik sind 2 Verfahren, um die Festigkeit der Wirbelkoerper nach osteoporotischen Kompressionsfrakturen durch Einbringen von Knochenzement wieder herzustellen. Die Vertebroplastie ist die aeltere, technisch einfachere und kostenguenstigere Technik, geht allerdings regelmaessig mit Zementaustritt einher. Die Ballonkyphoplastik ist die neuere kostenintensivere Technologie, mit der abgesehen von der Schmerzreduktion auch die Wiederherstellung des sagittalen Profils der Wirbelsaeule angestrebt werden kann. Mit der Ballonkyphoplastik konnten bei 101 frakturierten Wirbelkoerpern die Hoehe auf fast 90% des Sollwertes angehoben und die lokale Kyphose von 12 auf 7 vermindert werden. Die Schmerzen wurden - gemessen anhand einer 10-teiligen Skala - von 7,2 auf 2,5 reduziert. Der Oswestry disability

Inactivation of peroxidase, pectinesterase and alkaline phosphatase in polymers as a model for irradiation of dried foodstuffs

NARCIS (Netherlands)

Roozen, J.P.

1972-01-01

This thesis consists of a summary only of 6 refereed scientific papers published in Lebensmittel -Wissenschaft und -Technologie 3, 37-40 (1970); 4, 24-26, 93-96, 158-162, 196-200 (1971); 5, 128-131 (1972).

Aqueous solutions containing an enzyme (peroxidase, alkaline phosphatase,

Medienpädagogik und die Digitale Gesellschaft im Spannungsfeld von Regulierung und Teilhabe

Directory of Open Access Journals (Sweden)

Stefan Iske

2014-12-01

Full Text Available Vor 25 Jahren stellte Tim Berners-Lee sein Konzept eines World Wide Web (WWW vor und legte damit einen der bedeutendsten Grundsteine der digitalen Vernetzung. Was ursprünglich zum Austausch von Informationen und Daten unter Forschenden entworfen wurde, hat sich zu einem umfassenden Kultur- und Bildungsraum entwickelt und ist ein universaler und zentraler Dienst des Internet geworden. Dieser gegenwärtige Status des Internet und des World Wide Web ist der vorläufige Zwischenstand einer historischen Entwicklung, der sowohl Transformationen und Veränderungen als auch Konstanten zugrunde liegen. Nicht erst zum diesjährigen Geburtstag des World Wide Web wird deutlich, dass durch digitale und vernetzte Technologien zentrale Kategorien wie Bildung, Erziehung und Sozialisation berührt werden. Beispielhaft kann auf die aktuellen Debatten über Regulierungsmechanismen im Internet wie auch auf die Enthüllungen Edward Snowdens hingewiesen werden. Aus dem Vorangehenden lassen sich medienpädagogische Fragestellungen ableiten, die zum Beispiel die Handlungsautonomie von Subjekten sowie Möglichkeitsräume der Mitgestaltung von und Teilhabe an Gesellschaft (Winter 2012, Swertz 2014 thematisieren. Zudem sind es Fragen der Mediensozialisation und der Konstruktion von Identität in digital vernetzten Räumen (Jörissen/Marotzki 2008, die sowohl bei der Theoriebildung als auch im Rahmen medienpädagogischer Praxis eine hohe Relevanz besitzen.

Characterizations of Polystyrene-Based Hybrid Particles Containing Hydrophobic Mg(OH2 Powder and Composites Fabricated by Employing Resultant Hybrid Particles

Directory of Open Access Journals (Sweden)

Shuichi Kimura

2007-01-01

unchanged, even when the ST-1 powder content increased from 10 to 50 phr. Furthermore, a composite fabricated by employing the hybrid particles achieved homogenous distribution of ST-1 powder and showed a higher oxygen index than that of a composite fabricated by directly mixing of PS pellets and ST-1 powder.

Thermodynamik grundlagen und technische anwendungen

CERN Document Server

Baehr, Hans Dieter

2009-01-01

Für die aktualisierte 14. Auflage des bewährten Lehrbuchs der Technischen Thermodynamik wurde das Kapitel über Wärmekraftanlagen gründlich bearbeitet und durch einen Abschnitt zur Energiewandlung ergänzt: Die Energiebedarfsstruktur von Deutschland wird erläutert, und die möglichen Energiewandlungspfade werden diskutiert. Schwerpunkt des Buches ist die ausführliche und auch dem Anfänger verständliche Darstellung der Grundlagen der Thermodynamik mit der sorgfältigen Einführung der thermodynamischen Begriffe und den fundamentalen Bilanzgleichungen für Energie, Entropie und Exergie. Die thermodynamischen Eigenschaften reiner Fluide und fluider Gemische werden eingehend erläutert. Darauf aufbauend wird die Thermodynamik der Gemische und der chemischen Reaktionen entwickelt. Auch die thermodynamischen Aspekte wichtiger energie- und verfahrenstechnischer Anwendungen werden praxisnah behandelt: - Strömungs- und Arbeitsprozesse, - thermische Stofftrennverfahren, - Verbrennungsprozesse und Verbrennungsk...

Solar-assisted district heating systems - the SOLARIS pilot plant at Chemnitz - Status report; Solar unterstuetzte Nahwaermeversorgung - Pilotanlage SOLARIS Chemnitz Statusbericht `98

Energy Technology Data Exchange (ETDEWEB)

Urbaneck, T.; Schirmer, U. [Technische Univ. Chemnitz (Germany). Projektgruppe Solarthermie 2000

1998-12-31

The solar-assisted district heating in the Technology and Industrial Park SOLARIS is currently being built. The seasonal heat storage is a gravel-water tank with a volume of 8,000 cubic metre and has already been completed. The expectations have been met with respect to using a simple technology for the construction of seasonal storage and reducing costs. The initial operation is scheduled for summer 1998. Afterwards a two-year measuring programme will control and evaluate the function of the solar-assisted district heating system. (orig.) [Deutsch] Das solar unterstuetzte Nahwaermesystem im Chemnitzer Technologie- und Gewerbepark solaris befindet sich im Bau. Der saisonale Waermespeicher, ein 8000 m{sup 3} Kies-Wasser-Speicher ist fertiggestellt. Die Erwartungen in bezug auf eine einfache Technologie zum Bau von saisonalen Speichern und in bezug auf die Einhaltung des Kostenrahmens wurden erfuellt. Die Inbetriebnahme ist im Sommer 1998 geplant. Ein zweijaehriges Messprogramm soll nach Inbetriebnahme die Funktion des solar unterstuetzten Nahwaermesystems ueberwachen. (orig.)

Neuausrichtung und Konsolidierung

Science.gov (United States)

Grohmann, Heinz

Mit der Wahl von Wolfgang Wetzel zum Vorsitzenden der Deutschen Statistischen Gesellschaft im Jahre 1972 begann eine 32jährige Ära, in der die praktische und die theoretische Statistik in einem ausgewogenen Verhältnis gepflegt wurden. Ein regelmäßiger vierjähriger Wechsel im Vorsitz stärkte die Gemeinschaft und die praktische wie die wissenschaftliche Arbeit gleichermaßen. Die jährlichen Hauptversammlungen behandelten gesellschaftlich aktuelle wie zukunftsorientierte Themen, und die Ausschüsse sowie weitere Veranstaltungen gaben Gelegenheit zur Förderung und Pflege einer Vielzahl von Arbeitsgebieten der Statistik. Darüber wird nicht nur in diesem Kapitel, sondern auch in den Teilen II und III des Bandes berichtet.

Zur historischen Aufarbeitung und medialen Vermittlung der Shoah in Italien und Deutschland

Directory of Open Access Journals (Sweden)

Peter Kuon

2016-03-01

Full Text Available Claudia Müller, Patrick Ostermann und Karl-Siegbert Rehberg, Hrsg., Die Shoah in Geschichte und Erinnerung: Perspektiven medialer Vermittlung in Italien und Deutschland (Bielefeld: transcript, 2015.

Nanocellulose composites with enhanced interfacial compatibility and mechanical properties using a hybrid-toughened epoxy matrix.

Science.gov (United States)

Kuo, Pei-Yu; Barros, Luizmar de Assis; Yan, Ning; Sain, Mohini; Qing, Yan; Wu, Yiqiang

2017-12-01

Although there is a growing interest in utilizing nanocellulose fibres (NCFs) based composites for achieving a higher sustainability, mechanical performance of these composites is limited due to the poor compatibility between fibre reinforcement and polymer matrices. Here we developed a bio-nanocomposite with an enhanced fibre/resin interface using a hybrid-toughened epoxy. A strong reinforcing effect of NCFs was achieved, demonstrating an increase up to 88% in tensile strength and 298% in tensile modulus as compared to neat petro-based P-epoxy. The toughness of neat P-epoxy was improved by 84% with the addition of 10wt% bio-based E-epoxy monomers, which also mitigated the amount of usage of bisphenol A (BPA). The morphological analyses showed that the hybrid epoxy improved the resin penetration and fibre distribution significantly in the resulting composites. Thus, our findings demonstrated the promise of developing sustainable and high performance epoxy composites combing NCFs with a hybrid petro-based and bio-based epoxy resin system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Synthese und Charakterisierung wasserfreier Seltenerdmetall-Nitrate, -Acetate und -Oxyacetate

OpenAIRE

Heinrichs, Christina

2013-01-01

Durch thermische Entwässerung der Seltenerdmetall(SE)-Nitrat-Hydrate und der SE-Acetat-Hydrate im Argon-Strom/Vakuum konnten wasserfreie SE-Nitrate und SE-Nitrat-Monohydrate bzw. wasserfreie SE-Acetate erhalten werden. Es gelang zudem, SE-Oxyacetate durch thermische Zersetzung der SE-Acetate darzustellen. Des Weiteren wurde beim Erhitzen von Praseodym-Carbonat-Hydrat ein Pr-Carbonat-Hydroxid erhalten. Die Verbindungen wurden mittels Röntgenpulverdiffraktometrie und an ausgewählten Beispielen ...

Recht und Rechtssystem als globale Struktur und Medium der Verhaltensorientierung / Raul Narits

Index Scriptorium Estoniae

Narits, Raul, 1952-

2008-01-01

Äratr.: Multiple Modernität, Globalisierung der Rechtsordnung und Kommunikationsstruktur der Rechtssysteme : Internationales Symposium zur Theorie der Rechtskommunikation an der Universität Tartu im April 2006 ; II. Sonderheft Estland. Berlin, 2008, lk. 219-238. - (Rechtstheorie : Zeitschrift für Logik und Juristische Methodenlehre, Rechtsinformatik, Kommunikationsforschung, Normen- und Handlungstheorie, Soziologie und Philosophie des Rechts ; Bd. 38, 2007, H. 2/3)

Lexikon Schulpraxis Theorie- und Handlungswissen für Ausbildung und Unterricht

CERN Document Server

Homberger, Dietrich

2003-01-01

Das Lexikon Schulpraxis wendet sich an Lehrerinnen und Lehrer, die gezielt Fragen zu einem pädagogischen oder schulischen Sachthema klären oder ohne großen Aufwand eine knappe, präzise Information zu einem entsprechenden Stichworterhalten wollen. Die zahlreichen Querverweise ermöglichen darüber hinaus die Erschließung größerer thematischer Zusammenhänge. Insbesondere kann das Lexikon Schulpraxis von Lehrerinnen und Lehrern in der Ausbildung sowie von Berufsanfängern genutzt werden; es erschließt die Berufsfunktionen, gibt Hinweise zur Organisation und Verwaltung im Schulalltag, zu den Dienstpflichten und Vorschriften, es sichert die allgemeinen didaktischen und methodischen Grundlagen des Fachunterrichts, bietet rasche Orientierung sowie Hilfen bei der Vorbereitung und Reflexion des eigenen Unterrichts. Das Lexikon Schulpraxis hat stets das praktische Informationsinteresse eines Kollegen oder einer Kollegin im Blick. Besonders geachtet wurde auf eine verständliche Sprachgestaltung, auf erläuter...

GPS-gestützte Beikrautregulierung im Freilandgemüsebau

Directory of Open Access Journals (Sweden)

Hans-Peter Schwarz

2014-04-01

Full Text Available Im Freilandgemüsebau sollen einerseits qualitativ hochwertige Produkte erzeugt werden, die frei von Pflanzenschutzmittelrückständen und unerwünschtem Beikrautbesatz sind, andererseits nehmen Indikationslücken bei Herbiziden zu oder die Mittel können unerwünschte Rückstände verursachen. Zunehmend werden daher mechanische Verfahren zur Beikrautregulierung verwendet. Diese sind jedoch sehr zeitaufwendig und somit kostenintensiv. Ob die moderne GPS-Technologie die mechanische Beikrautregulierung unterstützen und optimieren kann, sollte in einer Masterthesis an der Hochschule Geisenheim geklärt werden. Die praktischen Untersuchungen führten zu dem Ergebnis, dass die Beikrautregulierung mittels GPS-Steuerung der Maschinen und Geräte nicht nur schneller, sondern auch kostengünstiger und präziser durchgeführt werden kann.

Disinfection of water with new chitosan-modified hybrid clay composite adsorbent

Directory of Open Access Journals (Sweden)

Emmanuel I. Unuabonah

2017-08-01

Full Text Available Hybrid clay composites were prepared from Kaolinite clay and Carica papaya seeds via modification with chitosan, Alum, NaOH, and ZnCl2 in different ratios, using solvothermal and surface modification techniques. Several composite adsorbents were prepared, and the most efficient of them for the removal of gram negative enteric bacteria was the hybrid clay composite that was surface-modified with chitosan, Ch-nHYCA1:5 (Chitosan: nHYCA = 1:5. This composite adsorbent had a maximum adsorption removal value of 4.07 × 106 cfu/mL for V. cholerae after 120 min, 1.95 × 106 cfu/mL for E. coli after ∼180 min and 3.25 × 106 cfu/mL for S. typhi after 270 min. The Brouers-Sotolongo model was found to better predict the maximum adsorption capacity (qmax of Ch-nHYCA1:5 composite adsorbent for the removal of E. coli with a qmax of 103.07 mg/g (7.93 × 107 cfu/mL and V. cholerae with a qmax of 154.18 mg/g (1.19 × 108 cfu/mL while the Sips model best described S. typhi adsorption by Ch-nHYCA1:5 composite with an estimated qmax of 83.65 mg/g (6.43 × 107 cfu/mL. These efficiencies do far exceed the alert/action levels of ca. 500 cfu/mL in drinking water for these bacteria. The simplicity of the composite preparation process and the availability of raw materials used for its preparation underscore the potential of this low-cost chitosan-modified composite adsorbent (Ch-nHYCA1:5 for water treatment.

Development of glass fibre reinforced composites using microwave heating technology

Science.gov (United States)

Köhler, T.; Vonberg, K.; Gries, T.; Seide, G.

2017-10-01

Fibre reinforced composites are differentiated by the used matrix material (thermoplastic versus duroplastic matrix) and the level of impregnation. Thermoplastic matrix systems get more important due to their suitability for mass production, their good shapeability and their high impact resistance. A challenge in the processing of these materials is the reduction of the melt flow paths of the thermoplastic matrix. The viscosity of molten thermoplastic material is distinctly higher than the viscosity of duroplastic material. An approach to reduce the flow paths of the thermoplastic melt is given by a commingling process. Composites made from commingling hybrid yarns consist of thermoplastic and reinforcing fibres. Fabrics made from these hybrid yarns are heated and consolidated by the use of heat pressing to form so called organic sheets. An innovative heating system is given by microwaves. The advantage of microwave heating is the volumetric heating of the material, where the energy of the electromagnetic radiation is converted into thermal energy inside the material. In this research project microwave active hybrid yarns are produced and examined at the Institute for Textile Technology of RWTH Aachen University (ITA). The industrial research partner Fricke und Mallah Microwave Technology GmbH, Peine, Germany develops an innovative pressing systems based on a microwave heating system. By implementing the designed microwave heating technology into an existing heat pressing process, FRTCs are being manufactured from glass and nanomodified polypropylene fibre woven fabrics. In this paper the composites are investigated for their mechanical and optical properties.

[Die baltischen Lande im Zeitalter der Reformation und Konfessionalisierung : Livland, Estland, Ösel, Ingermanland, Kurland und Lettgallen : Stadt, Land und Konfession 1500-1721. Teil 4. Hrsg. von Matthias Asche, Werner Buchholtz und Anton Schindlin

Index Scriptorium Estoniae

Maasing, Madis, 1984-

2013-01-01

Arvustus: Die baltischen Lande im Zeitalter der Reformation und Konfessionalisierung : Livland, Estland, Ösel, Ingermanland, Kurland und Lettgallen : Stadt, Land und Konfession 1500-1721. Teil 4. (Katholisches Leben und Kirchenreform im Zeitalter der Glaubensspaltung, 72). Hrsg. von Matthias Asche, Werner Buchholtz und Anton Schindling. Verlag Aschendorff. Münster 2012

Machinability and Tribological Properties of Stir Cast LM6/SiC/GR Hybrid Metal Matrix Composite

Directory of Open Access Journals (Sweden)

Tahat Montasser S.

2016-01-01

Full Text Available Analysis on machining characteristics in turning of LM6/SiC/Gr hybrid metal matrix composites is made of (Al-11.8%Si/SiC/Gr hybrid metal matrix composites. The process performances such as porosity, wear rate of the composites, tool wear, tool life, specific modulus, surface roughness and material removal rate with equal weight fraction of SiC and Gr particulates of 3%, 7%, 10% and 13% reinforcement are investigated. This experimental analysis and test results on the machinability of Al/SiCMMC will provide essential guidelines to the manufacturers. Hybird metal matrix composites reinforced with graphite particles posses better machinability and tribological properties.

Hybrid Composites for LH2 Fuel Tank Structure

Science.gov (United States)

Grimsley, Brian W.; Cano, Roberto J.; Johnston, Norman J.; Loos, Alfred C.; McMahon, William M.

2001-01-01

The application of lightweight carbon fiber reinforced plastics (CFRP) as structure for cryogenic fuel tanks is critical to the success of the next generation of Reusable Launch Vehicles (RLV). The recent failure of the X-33 composite fuel tank occurred in part due to microcracking of the polymer matrix, which allowed cryogen to permeate through the inner skin to the honeycomb core. As part of an approach to solve these problems, NASA Langley Research Center (LaRC) and Marshall Space Flight Center (MSFC) are working to develop and investigate polymer films that will act as a barrier to the permeation of LH2 through the composite laminate. In this study two commercially available films and eleven novel LaRC films were tested in an existing cryogenics laboratory at MSFC to determine the permeance of argon at room temperature. Several of these films were introduced as a layer in the composite to form an interleaved, or hybrid, composite to determine the effects on permeability. In addition, the effects of the interleaved layer thickness, number, and location on the mechanical properties of the composite laminate were investigated. In this initial screening process, several of the films were found to exhibit lower permeability to argon than the composite panels tested.

Molekulargenetische Studie zur Verbreitung und Interaktion von PCV-2 bei Haus- und Wildschweinen

OpenAIRE

Bronnert, Bastian Balthasar Marcel

2014-01-01

Im Rahmen der vorliegenden Arbeit wurden Wild- und Hausschweingewebeproben aus den Jahren 2005 bis 2008 mittels nested PCR auf das Vorkommen von PCV-2 untersucht und die positiv getesteten Proben mittels Realtime PCR quantifiziert. Zusätzlich wurden die Proben im Institut für Pathologie der Justus-Liebig-Universität histologisch und immunhistologisch untersucht (Dissertation Hohloch). Ziel war es das Vorkommen von PCV-2 und die Häufigkeit von PCV-2 assoziierter Erkankungen bei Haus- und Wilds...

Osteoporose und Laktoseintoleranz

Directory of Open Access Journals (Sweden)

Obermayer-Pietsch B

2008-01-01

Full Text Available Laktosemalabsorption oder Laktoseintoleranz ist eine symptomatische Unverträglichkeit von Milchzucker (Laktose, zumeist aufgrund einer autosomal rezessiv erblichen, irreversiblen Abnahme des Enzyms Laktase im Jugendalter, die bei etwa der Hälfte der Weltbevölkerung auftritt. Die Betroffenen meiden oft instinktiv Milch und Milchprodukte wegen der damit verbundenen Malabsorptions-Symptome. Damit scheiden diese Nahrungsmittel aber auch als Kalziumlieferanten aus und es kann zu einer Mangelversorgung des Knochens mit Kalzium und damit zu Osteoporose kommen. Da in Österreich etwa 20–25 % der Bevölkerung betroffen sind, ist diese Stoffwechselveränderung nicht zu vernachlässigen. Diagnostische und begleitende ernährungsmedizinische Maßnahmen und gegebenenfalls eine osteotrope Therapie sollten zum Erhalt der Knochenmasse eingesetzt werden.

PHP und MySQL der Web-Baukasten fur Einsteiger und Individualisten

CERN Document Server

Damaschke, Giesbert

2015-01-01

Sie haben schon eigene Webseiten gebaut und mochten diese nun mit Funktionen ausstatten, fur die Sie PHP und MySQL benotigen? Giesbert Damaschke zeigt Ihnen in diesem Buch, wie Sie das schaffen. Schritt fur Schritt erlernen Sie die benotigten Programmier- und Datenbankgrundlagen - immer im Rahmen von typischen dynamischen Anwendungen. So erheben und speichern Sie zum Beispiel mit Formularen Kontaktdaten, prufen Benutzereingaben, erstellen Menus, richten einen Besucherzahler ein, verschicken E-Mails mit PHP oder entwickeln sogar einen eigenen Blog. Alle Codebeispiele werden ausfuhrlich erklart,

PP composites with Hybrid Nanofillers: NTC phenomenon

International Nuclear Information System (INIS)

Sarlin, Juha; Immonen, Kirsi

2010-01-01

Electric conductive plastic composites have a wide potential for commercial applications, some examples are EMI shielding housings and components in automotive industry and in consumer electronics, equipments in health care sector and fuel cell components. A phenomenon in conductive composites, especially in composites with carbon based fillers, is change of thermal induced change in conductivity as a result of morphological transitions. Usually the observed changes are practically irreversible. The phenomenon may cause increasing resistivity, usually called as 'positive temperature coefficient' (PTC) or decreasing resistivity, called 'negative temperature coefficient' (NTC), where the new morphology created by heat treatment is more favorable for electric conductivity compared to the original state. The existence of NTC is a sing of the lost potential in material design and processing. Therefore detailed information about the phenomenon gives us tools to develop high performance conductive materials. It this paper we discuss about NTC phenomenon observed in PP composites with CNT or in-situ synthesized CNT-PANi hybrid nanofiller with an amphiphilic dispersing agent. The goal of the paper is not to present a comprehensive model of this phenomenon; we present some experimental results which may be related to polymer-filler interactions. These details are a part of this complicated phenomenon.

Steuern und Governance

Directory of Open Access Journals (Sweden)

Eduard Müller

2014-05-01

Full Text Available ENGLISH: Taxation, in the modern state, has long been a mass phenomenon with an interdisciplinary outlook. On the macro level of the state, a new generation of administrative reforms has crystallized under the label “good public governance”. These reforms seek to resolve regulatory interdependence of state and non - state actors by way of cooperation and interaction. In parallel, on the micro level of businesses, “corporate governance” – voluntary compliance with legal and ethical standards – has become an increasingly important issue. With a view to tax law and tax collection, these developments open up new possibilities to raise tax compliance by means of consensual and cooperative instruments and, accordingly, address taxation as a mass phenomenon. DEUTSCH: Besteuerung ist im modernen Staat ein Massenphänomen und längst interdisziplinär ausgerichtet. Auf der Makro-Ebene des Staates hat sich unter dem Begriff Good Public Governance eine neue Generation von Staats- und Verwaltungsreformen herausgebildet, die Regelungsbeziehungen von staatlichen und nichtstaatlichen Akteuren durch Kooperationen und Interaktionen zu lösen versucht. Parallel dazu hat auf der Mikro-Ebene der Unternehmen mit dem Thema Corporate Governance die freiwillige Einhaltung von rechtlichen und ethischen Regeln an Bedeutung gewonnen. Für das Steuerrecht und den Steuervollzug resultieren aus diesen Entwicklungen neue Möglichkeiten, durch Nutzung konsens- und kooperationsorientierter Instrumente die Tax Compliance zu erhöhen und so dem Massenphänomen Besteuerung gerecht zu werden.

Computerspielgewalt und Aggression: Längsschnittliche Untersuchung von Selektions- und Wirkungseffekten

OpenAIRE

Staude-Müller, Frithjof

2011-01-01

Auf Grundlage sozialkognitiver Aggressionsmodelle wurde die Beziehung zwischen Computerspielgewohnheiten und der Aggressionsneigung sowie Verzerrungen in der sozialen Informationsverarbeitung untersucht. Dazu wurden 499 Schüler/innen weiterführender Schulen (6.-8. Kl. Gymnasium, Haupt- und Realschule) in zwei Erhebungen mit einem Intervall von einem Jahr befragt. Mit hierarchischen Regressionsanalysen wurden Wirkungs- und Selektionseffekte geprüft, wobei relevante Drittvariablen (Monitoring u...

[Sascha Möbius. Das Gedähtnis der Reichsstadt. Unruhen und Kriege in der lübeckischen Chronistik und Kriege und Erinnerungskultur des späten mittelalters und der frühen Neuzeit

Index Scriptorium Estoniae

Hormuth, Dennis

2012-01-01

Arvustus: Sascha Möbius. Das Gedähtnis der Reichsstadt. Unruhen und Kriege in der lübeckischen Chronistik und Kriege und Erinnerungskultur des späten mittelalters und der frühen Neuzeit. (Göttingen, 2011)

Silicon solar cells with high efficiencies. Final report; Silicium-Solarzellen mit hoechsten Wirkungsgraden. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Wettling, W.; Knobloch, J.; Glunz, S.W.; Henninger, V.; Kamerewerd, F.J.; Koester, B.; Leimenstoll, A.; Schaeffer, E.; Schumacher, J.; Sterk, S.; Warta, W.

1996-06-01

In this report the basic activities for the development of the silicon high efficiency solar cell technology are described. The project had two main goals: (i) The improvement of efficiencies using a systematic optimization of all cell parameters and technology steps and (ii) the simplification of the technology towards the possibilities of an industrial production, keeping the cell efficiency at a high level. Starting from the LBSF technology, developed at Fraunhofer ISE, the reduction of all loss mechanisms led to efficiencies up to 22.5% on FZ-silicon. Using a modification of this technology efficiencies of up to 21.7% have been reached on Cz-silicon. Even after the reduction of the number of photolithographic steps from six to three efficiencies up to 21.6% on FZ- and 19.5% on Cz-silicon have been obtained. These are best values in an international comparison. (orig.) [Deutsch] In diesem Projektbericht werden grundlegende Arbeiten zur Entwicklung der Silicium-`Highefficiency`-Solarzellentechnologie beschrieben. Das Projekt hatte zwei Hauptziele: (i) Die Erhoehung der Wirkungsgrade durch eine systematische Optimierung aller Zellparameter und aller Technologieschritte und (ii) die Vereinfachung der Technologie unter Beibehaltung sehr hoher Wirkungsgrade mit dem Ziel einer Annaeherung an die Moeglichkeiten der Industriefertigung. Ausgehend von der im Fraunhofer ISE entwickelten LBSF-Technologie gelang es durch Reduzierung aller Verlustmechanismen, Wirkungsgrade bis zu 22.5% auf FZ-Silicium zu erreichen. Nach Anpassung der Technologie wurden auf Cz-Silicium Wirkungsgrade bis 21.7% erzielt. Ein von sechs auf drei Fotomaskenschritte reduzierter Prozess erzielte immerhin noch Werte bis 21.6% auf FZ- und 19.5% auf Cz-Material. Alle dieser Werte stellen im internationalen Vergleich Spitzenleistungen dar. (orig.)

Optimization and Static Stress Analysis of Hybrid Fiber Reinforced Composite Leaf Spring

Directory of Open Access Journals (Sweden)

Luay Muhammed Ali Ismaeel

2015-01-01

Full Text Available A monofiber reinforced composite leaf spring is proposed as an alternative to the typical steel one as it is characterized by high strength-to-weight ratio. Different reinforcing schemes are suggested to fabricate the leaf spring. The composite and the typical steel leaf springs are subjected to the same working conditions. A weight saving of about more than 60% can be achieved while maintaining the strength for the structures under consideration. The objective of the present study was to replace material for leaf spring. This study suggests various materials of hybrid fiber reinforced plastics (HFRP. Also the effects of shear moduli of the fibers, matrices, and the composites on the composites performance and responses are discussed. The results and behaviors of each are compared with each other and verified by comparison with analytical solution; a good convergence is found between them. The elastic properties of the hybrid composites are calculated using rules of mixtures and Halpin-Tsi equation through the software of MATLAB v-7. The problem is also analyzed by the technique of finite element analysis (FEA through the software of ANSYS v-14. An element modeling was done for every leaf with eight-node 3D brick element (SOLID185 3D 8-Node Structural Solid.

Genetic origin and composition of a natural hybrid poplar Populus???jrtyschensis from two distantly related species

OpenAIRE

Jiang, Dechun; Feng, Jianju; Dong, Miao; Wu, Guili; Mao, Kangshan; Liu, Jianquan

2016-01-01

Background The factors that contribute to and maintain hybrid zones between distinct species are highly variable, depending on hybrid origins, frequencies and fitness. In this study, we aimed to examine genetic origins, compositions and possible maintenance of Populus???jrtyschensis, an assumed natural hybrid between two distantly related species. This hybrid poplar occurs mainly on the floodplains along the river valleys between the overlapping distributions of the two putative parents. Resu...

Enhanced Thermal Conductivity of Polyimide Composites Filled with Modified h-BN and Nanodiamond Hybrid Filler.

Science.gov (United States)

Yang, Xi; Yu, Xiaoyan; Naito, Kimiyoshi; Ding, Huili; Qu, Xiongwei; Zhang, Qingxin

2018-05-01

A new thermally conductive and electrically insulative polyimide were prepared by filling different amounts of hexagonal boron nitride (h-BN) particles, and the thermal conductivity of Polyimide (PI) composites were improved with the increasing h-BN content. Based on this, two methods were applied to improve thermal conductivity furtherly at limited filler loading in this paper. One is modifying the h-BN to improve interface interaction, another is fabricating a nano-micro hybrid filler with 2-D h-BN and 0-D nano-scale nanodiamond (ND) to build more effective conductive network. Both surface modification and hybrid system have a positive effect on thermal conductivity. The composites introducing 40 wt% hybrid filler (the weight ratio of ND/modified BN was 1/10) showed the highest thermal conductivity, being up to 0.98 W/(m K) (5.2 times that of PI). In addition, the composites exhibits excellent electrical insulation, thermal stability properties etc.

Von Nischen und Infrastrukturen - Herausforderungen und neue Ansätze politischer Technologien

Directory of Open Access Journals (Sweden)

Felix Stalder

2011-06-01

Full Text Available Neue Technologien aus dem aktivistischen Umfeld bieten radikale Alternativen zu kultureller Nischenbildung und zentralisierten Web 2.0-Infrastrukturen. Die sozialen und politischen Realitäten der Digitalisierung und Vernetzung sind heute von zwei konstitutiven, aber grundsätzlich unterschiedlichen, ja teilweise sogar entgegengesetzten Dynamiken geprägt. Beide stellen den Medienaktivismus vor neue Herausforderungen. Zum einen können wir ein Aufblühen neuer kultureller Nischen und horizontaler Organisationsformen beobachten. Zum anderen erleben wir gleichzeitig eine enorme Zentralisierung und Konzentration auf der Ebene der Plattformen, welche einen grossen Teil der infrastrukturellen Grundlage des Wachstum der Nischen und neuen Kooperationsmuster darstellen. Nachdem der Aufbau alternativer Infrastrukturen – Zeitschriften, TV Kanäle und Internetplattformen – in den ersten 30 Jahren medienaktivistischer Projekte eine grosse Rolle gespielt hat (Stalder 2008 sind diese Fragen in den letzten 10 Jahren etwas in den Hintergrund getreten. Denn die Komplexität der Infrastrukturen nahm stetig zu, was es immer aufwendiger machte, sie zu betreiben und die neuen, offene Plattformen, wie sie für Web 2.0 typisch sind, stellten allen - scheinbar ohne Einschränkungen - mächtige Werkzeuge zu Verfügung. Warum eine eigene Plattform betreiben, wenn grosse professionelle Anbieter das besser, sicherer und kostenfrei anbieten? Heute sind die Probleme dieser Entwicklungen aber deutlich zu erkennen. Im Folgenden werden die Herausforderungen dieser Nischenbildung, die dunkle Seite der zentralisierten Infrastrukturen sowie die darauf reagierenden, neue Entwürfe für de-zentrale Infrastrukturen skizziert.

Rudolf Streinz. Meinungs- und Informationsfreiheit zwischen Ost und West / Henn-Jüri Uibopuu

Index Scriptorium Estoniae

Uibopuu, Henn-Jüri, 1929-2012

1983-01-01

Tutvustus: Streinz, Rudolf. Meinungs- und Informationsfreiheit zwischen Ost und West : Möglichkeiten und Grenzen intersystemarer völkerrechtlicher Garantien in einem systemkonstituierenden Bereich. Ebelsbach : Rolf Gremer, 1981

The Effect of Drawing Ｒatio on Mechanical Property of Nano-Hybrid Polyimide Composite Films

Directory of Open Access Journals (Sweden)

CHEN Hao

2017-06-01

Full Text Available In order to investigate the impact of drawing ratio of inorganic nano-hybrid polyamide three-layer composite films，the stretched composite films with different draw ratio were prepared by drawing partial imido polyamide film and then through the ring closing reaction in the high temperature，and the draw ratio was 0% ，2% ， 4% ，6% ，8% ，10% ，12% ，14% etc. Under the same conditions，we made different draw ratio of three-layer composite film tensile test with the electronic universal material testing machine. The results show: doped inorganic nanometer oxide made PI film elastic modulus increase slightly，the tensile strength and elongation at break decrease obviously，but the nano hybrid three-layer composite PI films still had good mechanical properties; The yield of polyimide film should be caused by forced high-elastic deformation of polyimide molecular chain，and it had nothing to do with whether doped inorganic nano-oxide or whether through stretched processing; With the increase of draw ratio，the elastic modulus of the nano hybrid three-layer composite PI films existed the trend of first increased and then slow down gradually，and the tensile strength and elongation at break first decreased and then increased.

Cyberbullying und Empathie : affektive, kognitive und medienbasierte Empathie im Kontext von Cyberbullying im Kindes- und Jugendalter

OpenAIRE

Pfetsch, Jan; Müller, Christin R.; Ittel, Angela

2014-01-01

"Bei medial vermittelter Kommunikation sinkt sowohl die Hemmschwelle für aggressive Verhaltensweisen wie Cyberbullying als auch die Wahrscheinlichkeit empathischer Reaktionen. Im Fokus der vorliegenden Studie mit 979 Schülerinnen und Schülern der 4.-8. Klassen (M=12.01, SD=1.68 Jahre, 55% weiblich) stand die Frage, ob Cyberbullies geringere Ausprägungen für affektive, kognitive und medienbasierte Empathie aufweisen als Unbeteiligte. Empathie wurde im Selbst- und Peerbericht erhoben. Hypothese...

Microstructural characterization of hybrid CFRP/SiC composites

International Nuclear Information System (INIS)

Von Dollinger, C.F.A.; Pardini, L.C.; Alves, S.C.N.

2016-01-01

In present work a hybrid matrix C-C/SiC composites were produced. Carbon fiber fabric was impregnated with phenolic resin mixed with powder Si in proportions of 5%, 10%, 15% e 20%wt. Optical microscopy under reflected light and polarized light were used in order to characterize samples in the as molded condition and after carbonization at 1000°C, and heat treatment 1600°C in order to react carbon and liquid silicon in order to form in situ SiC . The pore volume fraction ranges from 33% to 41% for composites after heat treatment at 1600°C due to volatiles released specially during carbonization process. Complementary analyses were done by Scanning Electron microscopy (SEM) and X-Ray diffraction to confirm in situ conversion of SiC. The results showed that the impregnation of a carbon fabric with phenolic resin added with silicon proved to be an alternative route to produce CFRP/SiC composites. (author)

Interlocked graphene-Prussian blue hybrid composites enable multifunctional electrochemical applications

DEFF Research Database (Denmark)

Zhang, Minwei; Hou, Chengyi; Halder, Arnab

2017-01-01

There has been increasing interest recently in mixed-valence inorganic nanostructure functionalized graphene composites, represented by Prussian blue, because they can cost-effectively apply to biosensors and energy devices. In this work, we present a one-pot green method to synthesize interlocked...... graphene-Prussian Blue hybrid composites as high-performance materials for biosensors and supercapacitor electrodes. Given the fact that graphene oxide (GO) can act as an electron acceptor, we used iron(II) and glucose as co-reducing agents to reduce GO under mild reaction conditions without introducing...

Teilchendetektoren Grundlagen und Anwendungen

CERN Document Server

Kolanoski, Hermann

2016-01-01

In diesem Buch werden die experimentellen Grundlagen von Teilchendetektoren und ihre Anwendung in Experimenten beschrieben. Die Entwicklung von Detektoren ist ein wichtiger Bestandteil der Teilchen-, Astroteilchen- und Kernphysik und gehört daher zum Handwerk des Experimentalphysikers in diesen Gebieten. Dieses umfassende Werk beinhaltet den kompletten Stoff für entsprechende Master-Module in der experimentellen Teilchenphysik, geht aber im Inhalt auch darüber hinaus. Zielgruppe sind Studierende, die sich in die Materie vertiefen möchten, aber auch Lehrende und Wissenschaftler, die das Buch zum Einstieg in das wissenschaftliche Arbeiten an Detektorentwicklungen verwenden können. Zielrichtung des Buches ist, die physikalischen Grundlagen für die Detektoren und ihrer verschiedenen Ausführungen so klar wie möglich und so tiefgehend wie nötig darzustellen. Die Breite des für die Detektorentwicklung nötigen Wissens umfasst viele Bereiche der Physik und Technik, von den Wechselwirkun...

Aussteigen aus dem Rechtsextremismus: Foto-Praxis, bildwissenschaftliche Analyse und Ausstellungsarbeit als Methoden individueller Reflexion und des wissenschaftlichen und (sozialpädagogischen Kompetenzerwerbs

Directory of Open Access Journals (Sweden)

Ulrike Pilarczyk

2013-06-01

Full Text Available Der Beitrag zeigt die medienpädagogischen und bildwissenschaftlichen Dimensionen eines zeitlich und thematisch gestaffelten Projektes auf. Ausgangspunkt war das in den Jahren 2009/10 von der Organisation EXIT-Deutschland in Berlin mit Aussteigern/-innen aus der rechtsextremen Szene initiierte Fotoprojekt «Lebensbilder». Die im Rahmen biografisch orientierter, medien- und sozialpädagogischer Fallarbeit entstandenen Fotos wurden als Prozess individueller Bilderzeugung und als Mittel zur Reflexion der jeweiligen Lebenssituation der Aussteiger(innen verstanden und eingesetzt. Eine Ausstellung schloss diese erste Phase des hier beschriebenen Projektes ab. Dem Wunsch folgend, die praktischen Erfahrungen aus der Arbeit mit Fotos wissenschaftlich überprüfen zu lassen, wurden in den Jahren 2011 und 2012 mit Studierenden am erziehungswissenschaftlichen Institut der TU Braunschweig die «Lebensbilder» zunächst einer wissenschaftlichen Bildanalyse unterzogen und anschliessend in einem gestalterisch-interpretativen Projekt durch die Studierenden zu einer Ausstellung weiterentwickelt.

Mechanical Property Analysis on Sandwich Structured Hybrid Composite Made from Natural Fibre, Glass Fibre and Ceramic Fibre Wool Reinforced with Epoxy Resin

Science.gov (United States)

Bharat, K. R.; Abhishek, S.; Palanikumar, K.

2017-06-01

Natural fibre composites find wide range of applications and usage in the automobile and manufacturing industries. They find lack in desired properties, which are required for present applications. In current scenario, many developments in composite materials involve the synthesis of Hybrid composite materials to overcome some of the lacking properties. In this present investigation, two sandwich structured hybrid composite materials have been made by reinforcing Aloe Vera-Ceramic Fibre Wool-Glass fibre with Epoxy resin matrix and Sisal fibre-Ceramic Fibre Wool-Glass fibre with Epoxy resin matrix and its mechanical properties such as Tensile, Flexural and Impact are tested and analyzed. The test results from the two samples are compared and the results show that sisal fibre reinforced hybrid composite has better mechanical properties than aloe vera reinforced hybrid composite.

Investigation on Shielding and Mechanical Behavior of Carbon/Stainless Steel Hybrid Yarn Woven Fabrics and Their Composites

Science.gov (United States)

Jagatheesan, Krishnasamy; Ramasamy, Alagirusamy; Das, Apurba; Basu, Ananjan

2017-08-01

This study investigates the shielding characteristics of carbon/stainless steel/polypropylene (C/SS/PP) hybrid woven fabrics and their composites in low frequency (50 MHz-1.5 GHz) and C band (4-6 GHz) regions. The hybrid yarns prepared from carbon and SS filaments using a direct twisting machine have been made into woven fabric samples using a sample loom. The composite has been made by sandwiching a hybrid yarn fabric between the polypropylene films in a compression molding machine at 180°C for 5 min. The shielding behavior of the fabric and the composites has been tested using a coaxial transmission holder for the low frequency range and a wave guide method for the C band frequency range. It has been observed that a 1 end float composite showed a higher SE of 81.4 dB than the 4 end float (76.2 dB) and the 8 end float composites (64 dB) at the low frequency region. However, at the C band frequency, the effect of fabric structures on shielding effectiveness (SE) of fabric composite depends on thread density. For example, at low thread density, (i.e.) 3.93 ppcm, the 8 end float fabric composite showed the highest SE of 22.7 dB than did the 4 end (20.4 dB) and the 1 end float (16.5 dB) fabric composite. However, at high thread density (6.3 ppcm), the case was the reverse. The 1 end float fabric composite showed the highest SE of 29.7 dB rather than 4 end and 8 end float fabric composites (25.9 dB). In addition, all the composites showed less SE than their fabric forms. The increase in thread density also increased the shielding behavior of composites in both frequency ranges. A nonlinear regression model was developed using the Box-Behnken design for predicting the shielding behavior of fabric composites in C band region. In addition to shielding behavior, mechanical strength of C/SS/PP hybrid yarn, the fabric and composite has been tested using a Zwick Roell tensile tester. It has been observed that the work of rupture of C/SS/PP hybrid yarn is higher (6830.3 g

Informationskompetenz und Information Literacy

OpenAIRE

Ingold, Marianne

2012-01-01

Informationskompetenz ist heute als Begriff , Konzept und praktisches Tätigkeitsfeld von Bibliotheken weltweit etabliert. Entstehung, Verbreitung und Entwicklung von „Informationskompetenz“ im deutschsprachigen Raum stehen in engem Zusammenhang mit dem in den USA und international seit den 1980er Jahren diskutierten und praktisch umgesetzten Konzept der „Information Literacy“. Auch wenn die beiden Begriffe in der Regel gleichbedeutend verwendet werden, zeigt ein Vergleich der vorwiegend aus e...

Gasphasen-Emissionskontrolle für Gießereien

DEFF Research Database (Denmark)

Meusinger, Carl

2014-01-01

. Basierend auf den natürlichen Reinigungsprozessen der Atmosphäre werden Schadstoffe in Partikel umgewandelt und dann elektrostatisch gefiltert. Eine Testreihe bei einer großen deutschen Gießerei im Saargebiet zeigt dass die Konzentrationen von Benzol um bis zu 90 % reduziert werden und die Konzen- trationen...... von anderen Kohlenwasserstoffen in der Abluft über mehrere Tage hinweg um mehr als 80 % reduziert werden. Es hat sich erwiesen, dass die neue Technologie unter den Real- bedingungen einer laufenden Gießerei Benzolkonzentrationen regelbar minimieren kann....

Von niederer Herkunft

DEFF Research Database (Denmark)

Schmidt, Kjeld

2015-01-01

Was man heute normalerweise unter «Computing» versteht, nämlich «Personal Computing», entwickelte sich nicht aus einer ‹Turingmaschine›, sondern als Technologie zur Erleichterung großangelegter kooperativer Arbeit. Es entstanden daraus interaktive Mensch-Maschine-Systeme, etwa Laptops und Smartph...... Smartphones, aber auch eingebettete Datenverarbeitungssysteme. Wichtige Paradigmen für Anwendungen des interaktiven Computing gehen auf Praktiker zurück, entstanden als praktische Techniken zum Eigengebrauch oder für die Verwendung durch Kollegen, und wurden später verallgemeinert....

A transformation framework for the compositional interchange format for hybrid systems

NARCIS (Netherlands)

Hendriks, D.; Schiffelers, R.R.H.; Hüfner, Martin; Sonntag, Christian

2012-01-01

The purpose of the Compositional Interchange Format for hybrid systems (CIF) is to establish inter-operability of a wide range of tools by means of model transformations - using the CIF as intermediate, the implementation of many bi-lateral translators between specific formalisms can be avoided.

Der Nahostkonflikt und die Medien

Directory of Open Access Journals (Sweden)

Carola Richter

2014-06-01

Full Text Available Diese Einführung in eine Themenausgabe zu den vielfältigen Rollen der Medien im Nahostkonflikt skizziert die Probleme, die sich für Medien und Journalisten als Akteure im Konflikt, Adressaten der Konfliktparteien und Anlass für Konflikt durch ihre Berichterstattung ergeben. Das Konfliktgebiet Israel und Palästina ist sowohl für Forschung über Auslandsbericht-erstattung, über transnationale Agenda Building- und Public Diplomacy-Prozesse als auch über mediensystemische Entwicklungen in Besatzer- und Besatzungsgebieten interessant. Der Artikel gibt einen Überblick über das Feld und führt dabei in die in der Themenausgabe präsentierten empirischen Studien zum Nahostkonflikt und den Medien ein.

Mechanical properties evaluation of single and hybrid composites polyester reinforced bamboo, PALF and coir fiber

Science.gov (United States)

Rihayat, T.; Suryani, S.; Fauzi, T.; Agusnar, H.; Wirjosentono, B.; Syafruddin; Helmi; Zulkifli; Alam, P. N.; Sami, M.

2018-03-01

This study aims to determine the composition fiber natural of bamboo, pineapple leaf and coir in single and hybrid composite to see the best characteristics of tensile strength and flexural test by using a Universal Testing Machine (UTM) and observe the effect on the microstructure of the composite through optical and scanning electron microscopy. Bamboo, Palf and coir have synthesis from natural fiber was used as reinforcement in polyester composite using hand lay up or a hot-compression moulding while filler:matrix was used (45%:55wt.%, 70%:30wt.% and 15%:85wt.%). From the variation of the volume fraction between filler and matrix show that mechanical properties of composites increased with increasing amount of filler in the matrix. This is evidenced by the high mechanical properties A:B:C/Ps in compositions 45%: 55wt.% 136 Mpa while flexural strength 93 N and good structure surface morphology. This research has produced a hybrid composite materials that have high mechanical properties and bending compared with conventional synthetic fibers and other materials.

Investigation of Tribological Behavior of a Novel Hybrid Composite Prepared with Al-Coconut Shell Ash Mixed with Graphite

Science.gov (United States)

Siva Sankara Raju, R.; Panigrahi, M. K.; Ganguly, R. I.; Srinivasa Rao, G.

2017-08-01

The present investigation develops a next-generation hybrid Al metal matrix composite using coconut shell ash (CSA) and graphite (Gr) reinforcement. Stir-casting is adapted to prepare an Al-1100-based composite. Three other composites of Al-Al2O3, Al-Al2O3-Gr, and Al-CSA are prepared that contain equivalent volume fractions of Al2O3, CSA, and Gr. These assist in comparisons among the three composites and the developed hybrid Al-CSA-Gr composite. The study reveals that the addition of 3 pct Gr improves the specific strength, toughness, and tribological properties. The Al-CSA composite shows better mechanical properties, such as tensile strength and hardness, than the other three composites. Gr addition helps the hybrid Al-CSA-Gr composite to attain better tribological properties with a slightly lower specific strength. Scanning electron microscopy studies of the worn material surfaces corroborate the findings of the abrasion testing. Elemental analyses by energy-dispersive X-ray spectroscopy of the debris from the counter-face of the tribo surface confirm the presence of Al, O, Si, Fe, Mn, and C.

Geschmackspapillendichte und Geschmackswahrnehmung bei Jugendlichen mit Essstörungen und einer gesunden Kontrollgruppe

OpenAIRE

Kaltenhofer, Alice

2009-01-01

Fragestellung Die Schmeckwahrnehmung wird u.a. über Lernprozesse, kognitive Vorgänge, genetische und biochemische Faktoren reguliert. Ess- und Diätverhalten werden durch sie beeinflusst. Den anatomisch und physiologisch ersten Abschnitt der Schmeckwahrnehmung bilden die fungiformen Geschmackspapillen. In den Geschmackspapillen liegen die Geschmacksknopsen, mit deren Hilfe die Schmeckstoffe aufgenommen und in Form von Aktionspotentialen zum Thalamus, dem limbischen System,dem Gyrus postzentral...

Kontrolle des Verwaltungsrates : eine Untersuchung der internen und externen Kontrollinstitutionen, -instrumente und -mechanismen

OpenAIRE

Reust, Dominik

2014-01-01

Eine wichtige Erkenntnis dieser Arbeit ist, dass eine effiziente und effektive Kontrolle des Verwaltungsrates nur über das Zusammenspiel der internen körperschaftlichen Kontrollinstitutionen und -instrumente mit den externen Kontrollinstitutionen und Kontrollmechanismen des Marktes erreicht wird. Die Vorschriften der VegüV betreffend transparente Entschädigungspolitik und unabhängige Stimmrechtsvertreter sowie die in der Aktienrechtsrevision angestrebte Stärkung der Informations-, Mitwirk...

Hybrid Carbon-Glass Fiber/Toughened Epoxy Thick Composite Joints Subject to Drop-Weight and Ballistic Impacts

National Research Council Canada - National Science Library

Liaw, Benjamin; Delale, Feridun

2007-01-01

... No. DAAD19-02-R-0010 to conduct research on hybrid carbon-S2 glass fiber/toughened epoxy thick-section, hybrid interwoven composite joints subject to drop-weight and ballistic impacts. Dr. Basavaraju B. Raju of U.S...

Vacuum infusion method for woven carbon/Kevlar reinforced hybrid composite

Science.gov (United States)

Hashim, N.; Majid, D. L.; Uda, N.; Zahari, R.; Yidris, N.

2017-12-01

The vacuum assisted resin transfer moulding (VaRTM) or Vacuum Infusion (VI) is one of the fabrication methods used for composite materials. Compared to other methods, this process costs lower than using prepregs because it does not need to use the autoclave to cure. Moreover, composites fabricated using this VI method exhibit superior mechanical properties than those made through hand layup process. In this study, the VI method is used in fabricating woven carbon/Kevlar fibre cloth with epoxy matrix. This paper reports the detailed methods on fabricating the hybrid composite using VI process and several precautions that need to be taken to avoid any damage to the properties of the composite material. The result highlights that the successfully fabricated composite has approximately 60% of fibres weight fraction. Since the composites produced by the VI process have a higher fibre percentage, this process should be considered for composites used in applications that are susceptible to the conditions where the fibres need to be the dominant element such as in tension loading.

Evaluation of Impact Strength of Epoxy Based Hybrid Composites Reinforced with E-Glass/Kevlar 49

Directory of Open Access Journals (Sweden)

SUBHAN ALIJOGI

2017-10-01

Full Text Available In hybridization different fibers are stacked layer by layer to produce laminates have specific strength and stiffness and employed in light weight high strength applications. Physically mean fabricated hybrid composites used in aerospace, under water, body armors and armed forces establishment. In present work drop-weight impact response of hybrid composites were investigated by making laminates of hybrid composites. In Hybridization layers of E-glass (roving and Kevlar 49 fabrics stacked with epoxy resin. The layers formulation was set up by hand layup method. Impregnationsof epoxy resin of commercial grade (601A in fabrics were accomplished by VRTM (Vacuum Bagging Resin Transfer Molding technique. Layup placementof Glass fibers/ Kevlar at 0°/90°, 45°/45° and 30°/60° were set for this work. Mechanical properties such as impact strength, bear resistance and break resistance were analyzed by usingASTM D-256 and D-3763 standard.Experimental investigation was conducted using instrumented Dart impact and Izod Impact test. E-glass/Kevlar 49 at layup 0°/90°and 30°/60°exhibited improvedimpact strength than 45°/45°. The surface morphology and fractography were also investigated by capturing different images of Specimens by using the SEM (Scanning Electron Microscopy. The fiberreinforcement and matrix fracture were also observed by using SEM.The SEM images suggest that epoxy resin tightly bonded with Kevlar fibers whereas Glass fibers were pulled out from laminations.

Evaluation of impact strength of epoxy based hybrid composites reinforced with e-glass/kevlar 49

International Nuclear Information System (INIS)

Jogi, S.A.; Memon, I.A.; Baloch, M.; Chandio, A.D.

2017-01-01

In hybridization different fibers are stacked layer by layer to produce laminates have specific strength and stiffness and employed in light weight high strength applications. Physically mean fabricated hybrid composites used in aerospace, under water, body armors and armed forces establishment. In present work drop-weight impact response of hybrid composites were investigated by making laminates of hybrid composites. In Hybridization layers of E-glass (roving) and Kevlar 49 fabrics stacked with epoxy resin. The layers formulation was set up by hand layup method. Impregnations of epoxy resin of commercial grade (601A) in fabrics were accomplished by VRTM (Vacuum Bagging Resin Transfer Molding) technique. Layup placementof Glass fibers/ Kevlar at 0 degree/90 degree, 45 degree/45 degree and 30 degree/60 degree were set for this work. Mechanical properties such as impact strength, bear resistance and break resistance were analyzed by using ASTM D-256 and D-3763 standard. Experimental investigation was conducted using instrumented Dart impact and Izod Impact test. E-glass/Kevlar 49 at layup 0 degree/90 degree and 30 degree/60 degree exhibited improvedimpact strength than 45 degree/45 degree. The surface morphology and fractography were also investigated by capturing different images of Specimens by using the SEM (Scanning Electron Microscopy). The fiberreinforcement and matrix fracture were also observed by using SEM.The SEM images suggest that epoxy resin tightly bonded with Kevlar fibers whereas Glass fibers were pulled out from laminations. (author)

Steueroasen und Regulierungsoasen – Auswirkungen auf die Stabilität des Finanzmarkts und politische Implikationen

Directory of Open Access Journals (Sweden)

Michaela Schmidt

2012-12-01

Full Text Available In diesem Beitrag wird dargelegt, dass Steuer- und Regulierungsoasen nicht nur Steuerausfälle und Kapitalflucht ermöglichen, sondern auch eine Hauptursache für die Finanzkrise 2007/2008 waren und weiterhin die Stabilität des Finanzmarkts gefährden. Sie haben den Boden bereitet für das Aufkommen nicht regulierter Finanzinstitutionen, sogenannter Schattenbanken. Regulierungsoasen ermöglichen Finanzmarktakteuren eine Umgehung von Regulierungs- und Aufsichtsvorschriften und heizen den Wettbewerb um niedrige Regulierungsvorschriften maßgeblich an. Jeder Schritt zu einer finanzpolitischen Re-Regulierung von Steuer- und Regulierungsoasen sowie Schattenbanken ist ein aktiver Schritt zur Krisenvorbeugung und damit zum Schutz der ArbeitnehmerInnen vor den gewaltigen volkswirtschaftlichen Kosten von Finanzkrisen.

Milch, Milchprodukte, Analoge und Speiseeis

Science.gov (United States)

Coors, Ursula

Die Produktpalette Milch und Erzeugnisse aus Milch beinhaltet Konsummilch, die aus Milch oder Bestandteilen der Milch hergestellten Milcherzeugnisse wie Sauermilch-, Joghurt-, Kefir-, Buttermilch-, Sahne-, Kondensmilch-, Trockenmilch- und Molkenerzeugnisse, Milchmisch- und Molkenmischprodukte (Produkte mit beigegebenen Lebensmitteln), Milchzucker, Milcheiweißerzeugnisse, Milchfette und Käse.

Hybrid Vehicle Technology Constraints and Application Assessment Study : Volume 1. Summary.

Science.gov (United States)

1977-11-01

This four-volume report presents analyses and assessments of both heat engine/battery- and heat engine/flywheel-powered hybrid vehicles to determine if they could contribute to near-term (1980-1990) reductions in transportation energy consumption und...

Effect of elevated temperature on the tensile strength of Napier/glass-epoxy hybrid reinforced composites

Science.gov (United States)

Ridzuan, M. J. M.; Majid, M. S. Abdul; Afendi, M.; Firdaus, A. Z. Ahmad; Azduwin, K.

2017-11-01

The effects of elevated temperature on the tensile strength of Napier/glass-epoxy hybrid reinforced composites and its morphology of fractured surfaces are discussed. Napier/glass-epoxy hybrid reinforced composites were fabricated by using vacuum infusion method by arranging Napier fibres in between sheets of woven glass fibres. Napier and glass fibres were laminated with estimated volume ratios were 24 and 6 vol. %, respectively. The epoxy resin was used as matrix estimated to 70 vol. %. Specimens were tested to failure under tension at a cross-head speed of 1 mm/min using Universal Testing Machine (Instron) with a load cell 100 kN at four different temperatures of RT, 40°C, 60°C and 80°C. The morphology of fractured surface of hybrid composites was investigated by field emission scanning electron microscopy. The result shows reduction in tensile strength at elevated temperatures. The increase in the temperature activates the process of diffusion, and generates critical stresses which cause the damage at first-ply or at the centre of the hybrid plate, as a result lower the tensile strength. The observation of FESEM images indicates that the fracture mode is of evolution of localized damage, from fibre/matrix debonding, matric cracking, delamination and fibre breakage.

Electroactive nanoparticle directed assembly of functionalized graphene nanosheets into hierarchical structures with hybrid compositions for flexible supercapacitors

Science.gov (United States)

Choi, Bong Gill; Huh, Yun Suk; Hong, Won Hi; Erickson, David; Park, Ho Seok

2013-04-01

Hierarchical structures of hybrid materials with the controlled compositions have been shown to offer a breakthrough for energy storage and conversion. Here, we report the integrative assembly of chemically modified graphene (CMG) building blocks into hierarchical complex structures with the hybrid composition for high performance flexible pseudocapacitors. The formation mechanism of hierarchical CMG/Nafion/RuO2 (CMGNR) microspheres, which is triggered by the cooperative interplay during the in situ synthesis of RuO2 nanoparticles (NPs), was extensively investigated. In particular, the hierarchical CMGNR microspheres consisting of the aggregates of CMG/Nafion (CMGN) nanosheets and RuO2 NPs provided large surface area and facile ion accessibility to storage sites, while the interconnected nanosheets offered continuous electron pathways and mechanical integrity. The synergistic effect of CMGNR hybrids on the supercapacitor (SC) performance was derived from the hybrid composition of pseudocapacitive RuO2 NPs with the conductive CMGNs as well as from structural features. Consequently, the CMGNR-SCs showed a specific capacitance as high as 160 F g-1, three-fold higher than that of conventional graphene SCs, and a capacitance retention of >95% of the maximum value even after severe bending and 1000 charge-discharge tests due to the structural and compositional features.Hierarchical structures of hybrid materials with the controlled compositions have been shown to offer a breakthrough for energy storage and conversion. Here, we report the integrative assembly of chemically modified graphene (CMG) building blocks into hierarchical complex structures with the hybrid composition for high performance flexible pseudocapacitors. The formation mechanism of hierarchical CMG/Nafion/RuO2 (CMGNR) microspheres, which is triggered by the cooperative interplay during the in situ synthesis of RuO2 nanoparticles (NPs), was extensively investigated. In particular, the hierarchical CMGNR

Synthesis and characterization of insulin/zirconium phosphate@TiO2 hybrid composites for enhanced oral insulin delivery applications.

Science.gov (United States)

Safari, Mostafa; Kamari, Younes; Ghiaci, Mehran; Sadeghi-Aliabadi, Hojjat; Mirian, Mina

2017-05-01

In this work, a series of composites of insulin (Ins)/zirconium phosphate (ZrP) were synthesized by intercalation method, then, these composites were coated with TiO 2 by sol-gel method to prepare Ins/ZrP@TiO 2 hybrid composites and the drug release of the composites was investigated by using UV-Vis spectroscopy. Ins/ZrP (10, 30, 60 wt%) composites were prepared by intercalation of insulin into the ZrP layers in water. Then Ins/ZrP composites were coated with different amounts of TiO 2 (30, 50, 100 wt %) by using titanium tetra n-butoxide, as precursor. Formation of intercalated Ins/ZrP and Ins/ZrP@TiO 2 hybrid composites was characterized by FT-IR, FE-SEM, BET and XRD analysis. Zeta potential of the optimized Ins/ZrP@TiO 2 hybrid composite was determined -27.2 mV. Cytotoxic effects of the optimized Ins/ZrP@TiO 2 hybrid composite against HeLa and Hek293T cell lines were evaluated using MTT assay and the results showed that designed drug delivery system was not toxic in biological environment. Compared to the Ins/ZrP composites, incorporation of TiO 2 coating enhanced the drug entrapment considerably, and reduced the drug release. The Ins/ZrP composites without TiO 2 coating released the whole drug after 30 min in pH 7.4 (phosphate buffer solution) while the TiO 2 -coated composites released the entrapped drug after 20 h. In addition to increasing the shelf life of hormone, this nanoencapsulation and nanocoating method can convert the insulin utilization from injection to oral and present a painless and more comfortable treatment for diabetics.

Perspectives on State-of-the-Art Carbon Nanotube/Polyaniline and Graphene/Polyaniline Composites for Hybrid Supercapacitor Electrodes.

Science.gov (United States)

Srikanth, Vadali V S S; Ramana, Gedela Venkata; Kumar, Puttapati Sampath

2016-03-01

Supercapacitors are attractive alternative energy storage sources. They offer high energy/power density with other characteristics like fast discharge/charge time, long operation stability, safety etc. In a supercapacitor, working electrode material is the principal constituent. At present there are numerous electrode materials (with properties) suitable for their use in hybrid type supercapacitors. Carbon/polyaniline (PANi) composites are one class of such electrode materials. Here, perspectives on state-of-the-art carbon/PANi composites namely carbon nanotube/polyaniline and graphene/polyaniline composites expedient as hybrid type supercapacitor electrode materials will be presented.

Quality control and in-service inspection technology for hybrid-composite girder bridges.

Science.gov (United States)

2014-08-01

This report describes efforts to develop quality control tools and in-service inspection technologies for the fabrication and construction of Hybrid Composite Beams (HCBs). HCBs are a new bridge technology currently being evaluated by the Missouri De...

Fundamental partial compositeness

DEFF Research Database (Denmark)

Sannino, Francesco; Strumia, Alessandro; Tesi, Andrea

2016-01-01

We construct renormalizable Standard Model extensions, valid up to the Planck scale, that give a composite Higgs from a new fundamental strong force acting on fermions and scalars. Yukawa interactions of these particles with Standard Model fermions realize the partial compositeness scenario. Unde...

Drilling of Hybrid Titanium Composite Laminate (HTCL) with Electrical Discharge Machining.

Science.gov (United States)

Ramulu, M; Spaulding, Mathew

2016-09-01

An experimental investigation was conducted to determine the application of die sinker electrical discharge machining (EDM) as it applies to a hybrid titanium thermoplastic composite laminate material. Holes were drilled using a die sinker EDM. The effects of peak current, pulse time, and percent on-time on machinability of hybrid titanium composite material were evaluated in terms of material removal rate (MRR), tool wear rate, and cut quality. Experimental models relating each process response to the input parameters were developed and optimum operating conditions with a short cutting time, achieving the highest workpiece MRR, with very little tool wear were determined to occur at a peak current value of 8.60 A, a percent on-time of 36.12%, and a pulse time of 258 microseconds. After observing data acquired from experimentation, it was determined that while use of EDM is possible, for desirable quality it is not fast enough for industrial application.

Drilling of Hybrid Titanium Composite Laminate (HTCL with Electrical Discharge Machining

Directory of Open Access Journals (Sweden)

M. Ramulu

2016-09-01

Full Text Available An experimental investigation was conducted to determine the application of die sinker electrical discharge machining (EDM as it applies to a hybrid titanium thermoplastic composite laminate material. Holes were drilled using a die sinker EDM. The effects of peak current, pulse time, and percent on-time on machinability of hybrid titanium composite material were evaluated in terms of material removal rate (MRR, tool wear rate, and cut quality. Experimental models relating each process response to the input parameters were developed and optimum operating conditions with a short cutting time, achieving the highest workpiece MRR, with very little tool wear were determined to occur at a peak current value of 8.60 A, a percent on-time of 36.12%, and a pulse time of 258 microseconds. After observing data acquired from experimentation, it was determined that while use of EDM is possible, for desirable quality it is not fast enough for industrial application.

Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites

International Nuclear Information System (INIS)

Jawaid, M.; Khalil, H.P.S. Abdul; Bakar, A. Abu; Khanam, P. Noorunnisa

2011-01-01

Tri layer hybrid composites of oil palm empty fruit bunches (EFB) and jute fibres was prepared by keeping oil palm EFB as skin material and jute as the core material and vice versa. The chemical resistance, void content and tensile properties of oil palm EFB/Jute composites was investigated with reference to the relative weight of oil palm EFB/Jute, i.e. 4:1, the fibre loading was optimized and different layering pattern were investigated. It is found from the chemical resistance test that all the composites are resistant to various chemicals. It was observed that marked reduction in void content of hybrid composites in different layering pattern. From the different layering pattern, the tensile properties were slightly higher for the composite having jute as skin and oil palm EFB as core material. Scanning electron microscopy (SEM) was used to study tensile fracture surfaces of different composites.

MAX Phase Modified SiC Composites for Ceramic-Metal Hybrid Cladding Tubes

International Nuclear Information System (INIS)

Jung, Yang-Il; Kim, Sun-Han; Park, Dong-Jun; Park, Jeong-Hwan; Park, Jeong-Yong; Kim, Hyun-Gil; Koo, Yang-Hyun

2015-01-01

A metal-ceramic hybrid cladding consists of an inner zirconium tube, and an outer SiC fiber-matrix SiC ceramic composite with surface coating as shown in Fig. 1 (left-hand side). The inner zirconium allows the matrix to remain fully sealed even if the ceramic matrix cracks through. The outer SiC composite can increase the safety margin by taking the merits of the SiC itself. In addition, the outermost layer prevents the dissolution of SiC during normal operation. On the other hand, a ceramic-metal hybrid cladding consists of an outer zirconium tube, and an inner SiC ceramic composite as shown in Fig. 1 (right-hand side). The outer zirconium protects the fuel rod from a corrosion during reactor operation, as in the present fuel claddings. The inner SiC composite, additionally, is designed to resist the severe oxidation under a postulated accident condition of a high-temperature steam environment. Reaction-bonded SiC was fabricated by modifying the matrix as the MAX phase. The formation of Ti 3 SiC 2 was investigated depending on the compositions of the preform and melt. In most cases, TiSi 2 was the preferential phase because of its lowest melting point in the Ti-Si-C system. The evidence of Ti 3 SiC 2 was the connection with the pressurizing

Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites

Directory of Open Access Journals (Sweden)

Mehdi Roohani

2016-06-01

Full Text Available This work aims to evaluate the thermal and dynamic mechanical properties of bagasse/glass fiber/polypropylene hybrid composites. Composites were prepared by the melt compounding method and their properties were characterized by differential scanning calorimetry (DSC and dynamic mechanical analysis (DMA. DSC results found that with incorporation of bagasse and glass fiber the melting temperature (Tm and the crystallisation temperature (Tc shift to higher temperatures and the degree of crystallinity (Xc increase. These findings suggest that the fibers played the role of a nucleating agent in composites. Dynamic mechanical analysis indicated that by the incorporation of bagasse and glass fiber into polypropylene, the storage modulus ( and the loss modulus ( increase whereas the mechanical loss factor (tanδ decrease. To assess the effect of reinforcement with increasing temperature, the effectiveness coefficient C was calculated at different temperature ranges and revealed that, at the elevated temperatures, improvement of mechanical properties due to the presence of fibers was more noticeable. The fiber-matrix adhesion efficiency determined by calculating of adhesion factor A in terms of the relative damping of the composite (tan δc and the polymer (tan δpand volume fraction of the fibers (Фf. Calculated adhesion factor A values indicated that by adding glass fiber to bagasse/polypropylene system, the fiber-matrix adhesion improve. Hybrid composite containing 25% bagasse and 15% glass fiber showed better fiber-matrix adhesion.

Gestion de bibliothèque au niveau de la Faculté de technologie

OpenAIRE

Mekkioui, Nadjet; Belhadj, Fatima Zohra

2014-01-01

Notre projet consiste à développer un logiciel permettant la gestion automatique de la bibliothèque de la Faculté de technologie. Cette automatisation concerne la gestion de prêt d’ouvrages, et ce en utilisant la méthode d'informatisation Merise. Cette dernière permet de concevoir un système d'information pour implanter le logiciel de gestion qui est développé dans un environnement Delphi. Nous avons focalisé notre projet sur la gestion automatique de prêt au niveau de la bibli...

Fibre-reinforced SiC ceramics: Properties and applications; Faserverstaerkte SiC-Keramik: Eigenschaften und Anwendungen

Energy Technology Data Exchange (ETDEWEB)

Leuchs, M. [MT Aerospace AG, Franz-Josef-Strauss-Str. 5, 86153 Augsburg (Germany)

2006-04-15

Composite ceramics can be produced by different processes resulting in different qualities. A composite ceramic material with C or SiC fibres and a SiC matrix is presented which is produced by chemical vapour infiltration (CVI). The material characteristics are defined by the embedding of the fibres in the matrix. For full utilisation of the strength and elasticity of the fibres, weak coupling between the fibres and matrix is required. The measured cracking resistances are similar to those of metals, e.g. grey cast iron. Applications so far have focused on applications where known materials cannot be used, e.g. because of high temperatures, thermoshock and brittle fracture problems, and wear. Examples are control flaps in aerospace applications are exposed to temperatures above 1600 degree C during re-entry into the earth atmosphere and heavy-duty sliding bearings in industrial pumps where ceramic composite materials have been in use for more than a decade. (orig.) [German] Mit Verbundkeramiken ist eine Werkstoffklasse entstanden, bei denen sich verschiedene Herstellverfahren mit unterschiedlichen Qualitaeten entwickelt haben [1]. Es wird eine Verbundkeramik mit C- bzw. SiC-Fasern und SiC-Matrix vorgestellt, die ueber die Infiltration der Fasern mit dem CVI-Verfahren (Chemical Vapour Infiltration) hergestellt wird [2]. Die Eigenschaften werden bestimmt durch die Qualitaet der Einbettung der Fasern in die Matrix. Nur eine schwache Ankopplung zwischen Fasern und Matrix erlaubt es, Festigkeit und Dehnbarkeit der Fasern auszunutzen. Die gemessenen Risswiderstaende solcher Verbundkeramiken liegen im Bereich von Metallen wie zum Beispiel Grauguss. Anwendungen konzentrieren sich bisher auf Gebiete, in denen die bekannten Werkstoffe nicht eingesetzt werden koennen. Gruende hierfuer sind zum Beispiel zu hohe Temperaturen, Thermoschock- und Sproedbruchverhalten und Verschleiss. Beispiele sind Steuerklappen aus dem Bereich der Raumfahrt, die beim Wiedereintritt in die

Relationship between the degree of conversion, solubility and salivary sorption of a hybrid and a nanofilled resin composite

Directory of Open Access Journals (Sweden)

Eduardo Moreira da Silva

2008-04-01

Full Text Available This study analyzed the relationship between the degree of conversion (DC, solubility, and salivary sorption of a hybrid (Filtek P 60 and a nanofilled resin composite (Filtek Supreme, and evaluated the influence of the light-activation mode on these properties. Two light-activation modes were used: Conventional (C; 850 mW/cm² for 20 s and Soft-start (SS; 100-1,000 mW/cm² for 10 s + 1,000 mW/cm² for 10 s. The DC (% was evaluated by FT-Raman spectroscopy. The solubility and salivary sorption were measured after immersion in artificial saliva for 7 days. Data were analyzed by ANOVA and Student-Newman-Keuls' test and linear regression analysis (a = 0.05. The DC varied from 50.52% (nanofilled composite to 57.15% (hybrid composite, and was influenced by the light-activation mode: C > SS. The solubility (0.45 mg/mm³ and salivary sorption (8.04 mg/mm³ of the nanofilled composite were greater than those of the hybrid composite (0.40 mg/mm³ / 6.87 mg/mm³, and were influenced by the light-activation mode: SS > C. Correlation was found between DC and solubility (r = - 0.89, p<0.05, as well as between solubility and salivary sorption (r = 0.95. These findings suggest that nanofilled composites may present higher degradation in the oral environment than hybrid ones. Soft-start light-activation mode may increase the solubility of resin composites.

Arbeitszeitflexibilisierung in der westdeutschen Metall- und Elektroindustrie und die Verbandsstrategien - Eine vergleichende Analyse der arbeitszeitpolitischen Strategien des Arbeitgeberverbandes Gesamtmetall und der Industriegewerkschaft Metall

OpenAIRE

Altun, Ufuk

2005-01-01

Arbeitszeitpolitik und Arbeitszeitgestaltung haben seit dem Tarifkompromiss im Jahre 1984 in der Metall-, und Elektroindustrie in der politischen und wissenschaftlichen Diskussion einen immensen Bedeutungszuwachs erfahren. Die Forderungen nach einer flexibleren Arbeitszeitgestaltung haben zeitgleich sowohl aus der Globalisierungsdiskussion und der Debatte um die Wettbewerbsfähigkeit des "Wirtschaftsstandorts Deutschland" heraus wie auch aus beschäftigungspolitischen Gründen neuen Auftrieb bek...

Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites

NARCIS (Netherlands)

Gresnigt, Marco M. M.; Kalk, Warner; Ozcan, M.; Ozcan, Mutlu

Objectives: This randomized, split-mouth clinical study evaluated the survival rate of direct laminate veneers made of two resin-composite materials. Methods: A total of 23 patients (mean age: 52.4 years old) received 96 direct composite laminate veneers using two micro-hybrid composites in

Intermediale Synchronisation zwischen Volltext und Film und ihre Realisierung in Hybrideditionen

OpenAIRE

Bülow, Gilles

2017-01-01

Diese Arbeit behandelt die theoretische Erfassung und prototypische Erzeugung komplexer Musterdokumente mit synchronisiertem »Volltext« und »Bewegtbild«. Dabei werden wesentliche Randbedingungen für die Dokumentengliederung ermittelt. Diese Randbedingungen erlauben es dann, unterhalb der Plattformebene (des »reinen« Buchs und des »reinen« Films) neue multimediale Hybrideditionen auf Basis elektronischer Publikationsformate als Ausgabeplattform »sinnvoll« zu generieren. Empirisch wird der F...

Buckling behavior of fiber reinforced plastic–metal hybrid-composite beam

International Nuclear Information System (INIS)

Eksi, Secil; Kapti, Akin O.; Genel, Kenan

2013-01-01

Highlights: ► We developed a new plastic–metal hybrid-composite tubular beam structure. ► This structure offers innovative design solutions with weight reduction. ► It prevents premature buckling without adding significant weight to the structure. ► The composite interaction gives better mechanical properties to the products. ► Buckling and bending loads of the beam increased 3.2 and 7.6 times, respectively. - Abstract: It is known that the buckling is characterized by a sudden failure of a structural member subjected to high compressive load. In this study, the buckling behavior of the aluminum tubular beam (ATB) was analyzed using finite element (FE) method, and the reinforcing arrangements as well as its combinations were decided for the composite beams based on the FE results. Buckling and bending behaviors of thin-walled ATBs with internal cast polyamide (PA6) and external glass and carbon fiber reinforcement polymers (GFRPs and CFRPs) were investigated systematically. Experimental studies showed that the 219% increase in buckling load and 661% in bending load were obtained with reinforcements. The use of plastics and metal together as a reinforced structure yields better mechanical performance properties such as high resistance to buckling and bending loads, dimensional stability and high energy absorption capacity, including weight reduction. While the thin-walled metallic component provides required strength and stiffness, the plastic component provides the support necessary to prevent premature buckling without adding significant weight to the structure. It is thought that the combination of these materials will offer a promising new focus of attention for designers seeking more appropriate composite beams with high buckling loads beside light weight. The developed plastic–metal hybrid-composite structure is promising especially for critical parts serving as a support member of vehicles for which light weight is a critical design

"Tabula Sinvs Venetici" von W. Barents und ihre Geschichtilische und Geographische Bedeutung

Directory of Open Access Journals (Sweden)

Mithad Kozličić

1999-06-01

Full Text Available In der wissenschaftlichen Literatur sind zwei Varianten der Seekarte der Adria vom niederländischen Seefahrer und Polarforscher Willem Barents (1550-1597 bekannt. Die erste, in diesem Aufsatz als K-1 bezeichnete Karte, wurde in Amsterdam 1595 hergestellt und gedruckt. Sie hatte anfänglich eine praktisch-navigatorische Funktion. Die zweite, K-2, ins Jahr 1595 datierte (1637-1662 Karte, wurde als geostrategische Karte der Adria und der südlichen Teile Europas ausgenützt. An den adriatischen Nordküsten, besonders in ihrem Hinterland, geschahen mit dem Durchbruch der Türken seit der Hälfte des 16. Jahrhunderts wichtige militärische und politische Änderungen. In den “Atlanten” des Niederländers Jan (Johann; Joannes Janssonius (1588-1664 fehlte gerade solch eine Karte, die auch mehrmals in Amsterdam gedruckt wurde, aber zwischen 1637 und 1662. Die K-1 von Barents, deren Druckplatte Janssonius zur Verfügung hatte, konnte diese Funktion befriedigen. Deswegen machte Janssonius nur die nötigen dem darstellenden Standard der ersten Hälfte des 17. Jahrhunderts entsprechenden Änderungen, und als solche wurde sie gedruckt. Die K-2 verlor ihre ursprüngliche praktisch-navigatorische Funktion und wurde eine Karte von geostrategischer Bedeutung. Mit diesen Grundfragen befaßt sich dieser Aufsatz.

Polyetheretherketone Hybrid Composites with Bioactive Nanohydroxyapatite and Multiwalled Carbon Nanotube Fillers

Directory of Open Access Journals (Sweden)

Chen Liu

2016-12-01

Full Text Available Polyetheretherketone (PEEK hybrid composites reinforced with inorganic nanohydroxyapatite (nHA and multiwalled carbon nanotube (MWNT were prepared by melt-compounding and injection molding processes. The additions of nHA and MWNT to PEEK were aimed to increase its elastic modulus, tensile strength, and biocompatibility, rendering the hybrids suitable for load-bearing implant applications. The structural behavior, mechanical property, wettability, osteoblastic cell adhesion, proliferation, differentiation, and mineralization of the PEEK/nHA-MWNT hybrids were studied. X-ray diffraction and SEM observation showed that both nHA and MWNT fillers are incorporated into the polymer matrix of PEEK-based hybrids. Tensile tests indicated that the elastic modulus of PEEK can be increased from 3.87 to 7.13 GPa by adding 15 vol % nHA and 1.88 vol % MWNT fillers. The tensile strength and elongation at break of the PEEK/(15% nHA-(1.88% MWNT hybrid were 64.48 MPa and 1.74%, respectively. Thus the tensile properties of this hybrid were superior to those of human cortical bones. Water contact angle measurements revealed that the PEEK/(15% nHA-(1.88% MWNT hybrid is hydrophilic due to the presence of nHA. Accordingly, hydrophilic PEEK/(15% nHA-(1.88% MWNT hybrid promoted the adhesion, proliferation, differentiation, and mineralization of murine MC3T3-E1 osteoblasts on its surface effectively on the basis of cell culture, fluorescence microscopy, MTT assay, WST-1 assay, alkaline phosphatase activity, and Alizarin red staining tests. Thus the PEEK/(15% nHA-(1.88% MWNT hybrid has the potential to be used for fabricating load-bearing bone implants.

A Numerical Study on Electrical Percolation of Polymer-Matrix Composites with Hybrid Fillers of Carbon Nanotubes and Carbon Black

Directory of Open Access Journals (Sweden)

Yuli Chen

2014-01-01

Full Text Available The electrical percolation of polymer-matrix composites (PMCs containing hybrid fillers of carbon nanotubes (CNTs and carbon black (CB is estimated by studying the connection possibility of the fillers using Monte Carlo simulation. The 3D simulation model of CB-CNT hybrid filler is established, in which CNTs are modeled by slender capped cylinders and CB groups are modeled by hypothetical spheres with interspaces because CB particles are always agglomerated. The observation on the effects of CB and CNT volume fractions and dimensions on the electrical percolation threshold of hybrid filled composites is then carried out. It is found that the composite electrical percolation threshold can be reduced by increasing CNT aspect ratio, as well as increasing the diameter ratio of CB groups to CNTs. And adding CB into CNT composites can decrease the CNT volume needed to convert the composite conductivity, especially when the CNT volume fraction is close to the threshold of PMCs with only CNT filler. Different from previous linear assumption, the nonlinear relation between CB and CNT volume fractions at composite percolation threshold is revealed, which is consistent with the synergistic effect observed in experiments. Based on the nonlinear relation, the estimating equation for the electrical percolation threshold of the PMCs containing CB-CNT hybrid fillers is established.

Referenzmodelle im Mobile Business: Analyse und Entwicklung neuer Rollen, Szenarien und Geschäftsmodelle

OpenAIRE

Hufenbach, Yvonne

2016-01-01

Das digitale Zeitalter ist charakterisiert durch sich stetig wandelnde Märkte, Techniken und wirtschaftliche Voraussetzungen. Klassische Wertschöpfungsketten brechen auf und wandeln sich zu Wertschöpfungsnetzen. Dabei findet eine Neuzuordnung zwischen Wertschöpfungstätigkeiten und Marktteilnehmern statt. Diese digitale Welt ist zudem durch hohe Interdependenzen wirtschaftlicher, informationstechnischer und rechtlicher Fragestellungen gekennzeichnet. Vor diesem Hintergrund verfolgt die Arb...

Effect of natural fibers and bio-resins on mechanical properties in hybrid and non-hybrid composites

Science.gov (United States)

Fragassa, Cristiano

2016-05-01

The aim of the present experimental investigation was to perform a comparative analysis concerning the influence on mechanical properties of natural fibers and/or bio-resins in reinforced thermoset composites. Flax and basalt fibers were selected as natural reinforcements, as single constituents or in hybrid combination. Glass synthetic fibers were used for comparison. Eco-friendly matrixes, both epoxy or vinylester, were considered and compared with composites based on traditional resins. Samples were fabricated by hand lay-up and resin infusion techniques. Cures were accelerated and controlled by applying heat and pressure in autoclave. Tensile, flexural and impact tests were carried out according to ASTM standards.

Benefit Analysis of Hybrid CNT/CFRP Composites in Future Aircraft Structures, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — During Phase I, Aurora Flight Sciences and N12 Technologies propose to conduct a comprehensive analysis of the benefits of hybrid composites in future aircraft...

M. G.-F. Leclerc, Préfet de la Haute-Savoie lors de sa visite dans le tunnel du LHC au Point 2 avec D. Delikaris, Département Technologie; dans la caverne de l'expérience ALICE avec B. Erazmus, Collaboration ALICE et lors de la signature du livre d'or avec F. Bordry, Chef du Département Technologie. P. Fassnacht, Conseiller au Bureau des Relations internationales présent.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

M. G.-F. Leclerc, Préfet de la Haute-Savoie lors de sa visite dans le tunnel du LHC au Point 2 avec D. Delikaris, Département Technologie; dans la caverne de l'expérience ALICE avec B. Erazmus, Collaboration ALICE et lors de la signature du livre d'or avec F. Bordry, Chef du Département Technologie. P. Fassnacht, Conseiller au Bureau des Relations internationales présent.

Klima- und umweltbezogene Lernprozesse in partizipativen Produktentwicklungsverfahren: Möglichkeiten und Grenzen

Directory of Open Access Journals (Sweden)

Marlen Arnold

2009-08-01

Full Text Available Für erfolgreiche und nachhaltige Produktentwicklung reichen heute Marktbeobachtung und Kund/innenbefragungen alleine nicht mehr aus. Mit Verfahren zur partizipativen Produktentwicklung (PPE können sowohl das kreative Potenzial von Nutzer/innen für die Produktentwicklung erschlossen als auch marktfähige nachhaltige Produkte entwickelt werden. Sie ermöglichen so aktives Nachhaltigkeitsmanagement. Am Beispiel des INNOCOPE-Pilotverfahrens wird diskutiert, wie nachhaltigkeitsbezogene Lernprozesse in PPE-Prozessen initiiert werden können und welche Faktoren dabei wesentlich sind. Insgesamt zeigt sich, dass vor allem die sich wiederholende, direkte und möglichst gleichberechtigte Interaktion von Unternehmensvertreter/innen und von Konsument/innen einen themenbezogenen Wissensaustausch und wechselseitige Lernprozesse ermöglicht. Dabei sind der inhaltliche Aufbau der Treffen und der zeitlich gestaffelte Einsatz von Lernmethoden wesentlich.Today, market observation and customer surveys alone do not suffice to develop successful and sustainable products. Methods of participatory product development (PPD allow to open up the creative potential of users for product development, and to develop marketable sustainable products. Thereby, they support active sustainability management. Taking the INNOCOPE pilot process as an example, we discuss the possibilities and the relevant factors to initiate sustainability- and climate-related learning processes within PPD processes. Our findings indicate that repeated, direct and equitable interaction between company representatives and customers are fundamental for relevant knowledge exchange and mutual learning processes. Other key issues are the thematic structure of the meetings and the timing of learning methods.

Compressive strength measurements of hybrid dental composites treated with dry heat and light emitting diodes (LED post cure treatment

Directory of Open Access Journals (Sweden)

Jenny Krisnawaty

2014-11-01

Full Text Available Hybrid composites are mostly used on large cavities as restorative dental materials, whether it is used directly or indirectly. The mechanical properties of composite resin shall increase if it is treated with post cure treatment. The aim of this study is to evaluate compressive strength differences between dry heat and Light Emitting Diodes (LED treatment on the hybrid dental composite. A quasi-experimental was applied on this research with a total of 30 samples that were divided into two groups. Each sample was tested using LLOYD Universal Testing Machine with 1 mm/min speed to evaluate the compressive strength. The compressive strength results were marked when the sample was broken. The results of two groups were then analyzed using t-test statistical calculation. The results of this study show that post cure treatment on hybrid composite using LED light box (194.138 MPa was lower than dry heat treatment (227.339 MPa, which was also significantly different from statistical analysis. It can be concluded that compressive strength of LED light box was lower than dry heat post-cure treatment on the hybrid composite resin.

Characterization of Glass Fibre – Coconut Coir– Human Hair Hybrid Composites

OpenAIRE

D. Senthilnathan; A Gnanavel Babu; G. B. Bhaskar; KGS. Gopinath

2014-01-01

A composite material is a combination of two or more materials arranged in the form of layer one on the other layer using binding material through some prescribed methods. In the Glass fibre coconut fibre human hair hybrid composite method, the epoxy resin is used as binding material, in which one layer is formed of glass fibre, followed by coconut fibre and then by human hair. By using hand layup method and by changing the above arrangement of layers, six types of laminates are prepared by u...

Clinical value of FDG hybrid-PET in staging and restaging of malignant lymphoma. Compared with conventional diagnostic methods; Klinische Wertigkeit der Befunde von FDG-PET mittels Koinzidenz-Gammakamera beim Staging und Restaging maligner Lymphome. Ein Vergleich zu konventioneller Diagnostik

Energy Technology Data Exchange (ETDEWEB)

Pichler, R.; Maschek, W.; Hatzl-Griesenhofer, M.; Huber, H. [Allgemeines Krankenhaus Linz (Austria). Inst. fuer Nuklearmedizin; Wimmer, G.; Wahl, G.; Fridrik, M. [Allgemeines Krankenhaus Linz (Austria). I. Medizinische Abt.

2000-09-01

Aim of the present retrospective study was to validate the clinical value of F-18-FDG PET imaging in lymphoma patients with a dual head camera modified for coincidence detection. Staging before and after oncological treatment was compared with a conservative diagnostic approach. Methods: 48 patients (28 non-Hodgkin lymphoma, 20 Hodgkin's disease) received FDG-Hybrid-PET scans. Pretherapeutic staging was realized in 28 patients, 9 of them had control studies after they had completed therapy. Totally 29 persons were examined for posttherapeutic restaging. Computed tomography imaging and lymph node sonography was performed in all cases. Results were validated by clinical follow-up, in three cases a recidive was proven by biopsy. Results: CT and ultrasound detected 77 lesions in 28 patients compared with 100 visualized by PET, but this difference in pretherapeutic staging did not reach significance at p>0.05 by Fisher's t-test. Hybrid-PET obtained a sensitivity of 93%, a specifity of 79%, a positive of 82% and a negative predictive value of 92% for detection of residual disease. The values for CT+US were 87%, 64%, 72% and 88% respectively. Conclusion: FDG Hybrid-PET is as or even more accurate than standard morphologic diagnostic methods for prestaging in malignant lymphoma. Additionally, there is a substancial benefit for therapy monitoring of residual disease using coincidence detection PET with a 3/4-inch crystal gamma camera. (orig.) [German] Ziel der vorliegenden retrospektiven Studie war die Validierung der klinischen Wertigkeit von F-18-FDG-PET mittels Doppelkopf-Koinzidenz-Gammakamera bei Lymphompatienten. Die Ergebnisse von prae- und post-therapeutischem Staging wurden mit dem konservativ bildgebender Verfahren verglichen. Methoden: 48 Patienten (28 NHL, 20 Morbus Hodgkin) erhielten FDG-DK-PET-Untersuchungen. Ein praetherapeutisches Staging wurde bei 28 Patienten durchgefuehrt, 9 von diesen hatten weitere Kontrollstudien nach abgeschlossenem

Klimaanpassung in Land- und Forstwirtschaft: Ergebnisse eines Workshops der Ressortforschungsinstitute FLI, JKI und Thünen-Institut

OpenAIRE

Schimmelpfennig, Sonja; Heidecke, Claudia; Beer, Holger; Bittner, Florian; Klages, Susanne; Krengel, Sandra; Lange, Stefan

2018-01-01

Das Working Paper stellt die Ergebnisse einer Umfrage und eines Workshops zusammen, die von Wissenschaftlern und Wissenschaftlerinnen der Ressortforschungsinstitute Thünen-Institut, Julius Kühn-Institut (JKI) und Friedrich-Loeffler-Institut (FLI) im Herbst 2016 zusammengetragen und diskutiert worden sind. Ziel des Workshops und der Umfrage war, den Stand des Wissens zu Klimaanpassungsthemen in der Ressortforschung des BMEL und die zukünftigen Herausforderungen einer Anpassung an den Klimawand...

Structure and characteristics of EB-PVD thermal insulation layers; Struktur und Eigenschaften von EB-PVD-Waermedaemmschichten

Energy Technology Data Exchange (ETDEWEB)

Schulz, U. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany). Inst. fuer Werkstoff-Forschung

1996-12-31

Thermal insulation layers for guide blades and rotor blades in the first two stages of a high-pressure turbines are produced by electron-beam physical vapour deposition for maximum quality. The layers have a lifetime that is longer by a factor of 2 to 10 than for plasma-sprayed layers. The following characteristics of the ceramic layer have a decisive influence on the life of the composite system: Phase composition, distribution and stability, microstructure, density, thickness, crack distribution and cohesive strength. Some selected aspects of the interdependence between production parameters, microstructure of the thermal insulation layer and service life are gone into. [Deutsch] Zur Herstellung von Waermedaemmschichten (WDS) fuer Turbinenleit- und Laufschaufeln der ersten beiden Stufen in der Hochdruckturbine wird fuer hoechste Ansprueche an die Schichtqualitaet das EB-PDV-Verfahren (electron-beam physical vapour deposition) eingesetzt. Die Lebensdauer dieser Schichten ist um den Faktor 2 bis 10 besser als beim Plasmaspritzen. Bei der keramischen Waermedaemmschicht selbst beeinflussen folgende Eigenschaften die Lebensdauer des Gesamtschichtsystems nachhaltig: Phasenzusammensetzung, -verteilung und -stabilitaet, Mikrogefuege, Dichte, Dicke, Rissverteilung und kohaesive Festigkeit. Auf einige ausgewaehlt Aspekte des Zusammenhangs zwischen Herstellungsparametern, Mikrostruktur der Waermedaemmschicht und Lebensdauer wird kurz eingegangen. (orig.)

Design, construction and testing of holographic PV concentrator modules and construction of a pilot plant for serial production of the holographic optical concentrator system on flexible foils. Follow-up project: Completion of the production process for mass production of large format holographic optical elements on flexible foils for solar technology. Final report; Auslegung, Konstruktion und Test von holographischen PV-Konzentratormodulen und Aufbau einer Pilotanlage zur Serienfertigung der holographischen Konzentratoroptik auf flexiblen Folien. Anschlussvorhaben: Vervollstaendigung der Produktionsverfahren fuer die Serienfertigung von grossformatigen holographischen optischen Elementen auf flexiblen Folien fuer die Solartechnik. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Stojanoff, C.G.; Froehlich, K.; Froening, P.; Schulat, J.; Schuette, H.; Wagemann, E.U.

1997-06-30

The aim of the research project is the development of a technique for value for money mass-production of large area holographic focussers made of dichromate gelatine for photo-electrics. The holograms act simultaneously as spectrally dispersing and focussing optical elements, which focus the sunlight in discrete bands on the spectrally matched solar cells. The three marked characteristics of the holographic focussers are the diffraction efficiency, the spectral bandwidth and the central working wavelength. The optimum values of these parameters depend on the variation of the layer thickness and the index of refraction over the aperture of the hologram, and on the ability of the DCG layer to provide great modulation of the index of refraction. Mass-production of large format holographic lenses (transmission holograms) and mirrors (reflection holograms) demands precise coating of the supporting substrate (glass or PET foil) with dichromate gelatine. Mass-production of the holographic lenses requires a matrix hologram with 50% diffraction efficiency and is done with two copier plants developed in the project. (orig./AKF) [Deutsch] Ziel des Forschungsvorhabens ist die Entwicklung einer Technologie fuer die preiswerte serielle Herstellung von grossflaechigen holographischen Konzentratoren in Dichromatgelatine fuer die Photovoltaik. Die Hologramme wirken gleichzeitig als spektral dispergierende und fokussierende optische Elemente, die das Sonnenlicht in diskreten Baendern auf spektral angepasste Solarzellen konzentrieren. Die drei kennzeichnenden Charakteristiken der holographischen Konzentratoren sind die Beugungseffizienz, die spektrale Bandbreite und die zentrale Arbeitswellenlaenge. Die optimalen Werte dieser Parameter sind durch die Variation der Schichtdicke und des Brechnungsindexes ueber die Apertur des Hologramms, sowie durch die Faehigkeit der DCG-Schicht grosse Brechungsindexmodulation zu ermoeglichen, eindeutig bedingt. Die serielle Fertigung der

Cutting Modeling of Hybrid CFRP/Ti Composite with Induced Damage Analysis

Science.gov (United States)

Xu, Jinyang; El Mansori, Mohamed

2016-01-01

In hybrid carbon fiber reinforced polymer (CFRP)/Ti machining, the bi-material interface is the weakest region vulnerable to severe damage formation when the tool cutting from one phase to another phase and vice versa. The interface delamination as well as the composite-phase damage is the most serious failure dominating the bi-material machining. In this paper, an original finite element (FE) model was developed to inspect the key mechanisms governing the induced damage formation when cutting this multi-phase material. The hybrid composite model was constructed by establishing three disparate physical constituents, i.e., the Ti phase, the interface, and the CFRP phase. Different constitutive laws and damage criteria were implemented to build up the entire cutting behavior of the bi-material system. The developed orthogonal cutting (OC) model aims to characterize the dynamic mechanisms of interface delamination formation and the affected interface zone (AIZ). Special focus was made on the quantitative analyses of the parametric effects on the interface delamination and composite-phase damage. The numerical results highlighted the pivotal role of AIZ in affecting the formation of interface delamination, and the significant impacts of feed rate and cutting speed on delamination extent and fiber/matrix failure. PMID:28787824

Diagnostik und Therapie der kutanen Androgenisierung im klimakterischen Übergang sowie in der Peri- und Postmenopause: Hirsutismus und Alopezie

Directory of Open Access Journals (Sweden)

Geisthövel F

2012-01-01

Full Text Available Die weibliche Androgenisierung umfasst ein weites Spektrum an heterogenen Dysfunktionen und Erkrankungen. Um die Therapieprinzipien des Hirsutismus sowie der Alopecia androgenetica während des klimakterischen Übergangs („menopausal transition“ [MT] und der Peri-/Postmenopause zu erfassen, ist es sinnvoll, sich auf eine Gruppe von androgenisierten Patientinnen zu beschränken, bei der die Haut pathogenetisch im Fokus liegt. Solch eine klar definierte Patientengruppe, die „funktionell kutane Androgenisierung“ (FCA, kann meist schon über die Diagnostikebene 1 (Screening-Ebene unseres Klassifikations-Algorithmus diagnostiziert werden. Der Ferriman-Gallwey-Index bzw. eine modifizierte Sinclair-Scale dienen zur Gradeinteilung von Hirsutismus bzw. Alopezie. Die ausgeprägte endokrine Dynamik während der MT ist hormondiagnostisch zu beachten. Wachsepilation und Lasertherapie sind vielfältig eingesetzte topischmechanische bzw. -physikalische Therapieverfahren. Eine topische Behandlung des Hirsutismus kann auch mit Eflornithin-Creme durchgeführt werden, die den Effekt einer Lasertherapie unterstützt. Minoxidil-Lösung gilt als Mittel der ersten Wahl bei der topischen Therapie der Alopecia androgenetica. Steroidale Präparate, welche aus der kontrazeptiven Kombination von Ethinylestradiol und antiandrogenen Gestagenen (AA bestehen, sind therapeutische Prinzipien bei androgenisierten Patientinnen in der MT, sie sind hingegen in der Postmenopause kontraindiziert. Die orale Einnahme von Spironolacton und/oder Finasterid, beides nicht-steroidale Antiandrogene, ist während der MT unter sicherer Kontrazeption und jene von Spironolacton für die Alopezie in der Postmenopause gut geeignet. Die Einnahme von Kombinationsprapäraten, welche die nicht-kontrazeptiven natürlichen Östrogene und AA enthalten, sind für die Behandlung der FCA bei Patientinnen indiziert, die zusätzlich unter klimakterischen und peri-/postmenopausalen Störungen leiden

Logos und etos der Heiligkeit im Licht der liturgischen Texte vom hl. Stanislaus, Bischof und Märtyrer

Directory of Open Access Journals (Sweden)

Jan Józef Janicki

2003-12-01

Full Text Available Im Jahr 2003 feiert die Kirche in Polen das 750-jährige Jubiläum der Heiligsprechung des Bischofs Stanislaus (1030-1079, der im Jahre 1253 in Assisi, als erste Pole, kanonisiert wurde und zum Patron von ganz Polen ernannt. Der Verfasser analisiert das Messformular und Stundengebetsformular von der liturgischen Feier des hl. Stanislaus, Bischof und Märtyrer am 8 Mai und sucht dadurch die Lehre (logos über das christliche Leben und die konkrete Lebens-Konsequenzen (etos aufzuzeigen. Die erneuerten liturgischen Texte der Gebete des neuen römischen Messbuches und des Stundengebetes zeigen den Glauben der betenden Kirche nach dem alten Prinzip: legem credendi lex statuat supplicandi (oder kurz ausgedrückt: lex orandi lex credendi. Der Zweck also des hier vorgestellten Artikels ist es, den Glauben der Kirche über das heilige Leben der Christen zu demonstrieren, welches uns eine Analyse der euchologischen Texte und der Texte der Wortliturgie ermöglicht. Der Verfasser benutzte dann die Möglichkeit, diese ganze Problematik im breiten theologisch-liturgischen und pastoralen Kontext darzustellen. Dabei benutzte er die Dokumente der Kirche der letzten Jahre, insbesondere die Lehre des II. Vatikanischen Konzils wenn es um den pastoralen Dienst der Bischöfe geht, dann die pastoral-theologischen Briefe des Papstes Pius XII und des Papstes Johannes Paul II, zum 700-jährigen und zum 750-jährigen Jubiläum der Kanonisation des hl. Bischofs Stanislaus. Es geht aber auch um alles das, was Johannes Paul II und früher als Kardinal Karol Wojtyła zum Jahrestag des Märtyrertodes geschrieben hat. Die liturgischen Gebetstexte lex orandi und die Wortliturgie unterstreichen in ihrer lex credendi, dass der hl. Stanislaus in seinem Leben, in seiner Zeit und seiner Kirche, den Auftrag und die Vollmacht - die Christus den Aposteln und ihren Nachfolgern gegeben hat - alle Völker zu lehren, die Menschen in der Wahrheit zu heiligen und sie zu weiden, verwirklicht

Digitalisierung und Selbstbestimmung

Directory of Open Access Journals (Sweden)

Bezemek, Christoph

2017-12-01

Full Text Available Der vorliegende Beitrag skizziert das Zusammenspiel von Digitalisierung und individueller Selbstbestimmung, stellt die Frage, welche Herausforderungen dieses Zusammenspiel birgt und diskutiert, wie ihnen begegnet werden kann.

Editorial 01/2013 Normen und Normierungen

Directory of Open Access Journals (Sweden)

Christian Swertz

2013-03-01

Full Text Available Auf unterschiedlichsten Ebenen werden die Diskussionen und Forschungen der Medienpädagogik von normativ aufgeladenen Begriffen durchzogen: so, wenn es um Standards in der Medienbildung geht, wenn beispielsweise diskutiert wird, welche Inhalte in welcher Form vermittelt werden sollen; so auch wenn zur Debatte steht, wie Medienpädagogik institutionalisiert werden sollte und welche Voraussetzungen gegeben sein müssen, um einen geplanten Bildungsprozess zu lenken oder anzuleiten.Derartige Norm(ierungen wurden bereits mit der Konzeptualisierung des Begriffs Medienkompetenz und im Blick auf die Emanzipation des Menschen kritisch beleuchtet, womit auch Kritik an gesellschaftlichen Herrschafts- und Machtstrukturen verbunden war. Die Orientierung an der sozialwissenschaftlich verstandenen Emanzipation des Menschen ist allerdings in anderen pädagogischen Disziplinen durchaus umstritten. Gleichzeitig ist zu beobachten, dass die gesellschaftskritische Perspektive im medienpädagogischen Diskurs über die Orientierung von Medienkompetenz und Medienbildung eine immer geringere Rolle spielt. Deshalb hat sich die Redaktion der MEDIENIMPULSE entschlossen, dem Thema Normen und Normierungen eine eigene Ausgabe zu widmen.Dabei sollten folgende Fragen behandelt werden:Wie sieht es mit Norm(ierungen im Bereich der Mediendidaktik aus? Wie sind die mit aktuellen Medienkompetenz- und Medienbildungsbegriffen verbundenen Normen epistemologisch und (medientheoretisch abgestützt? Wie lassen sich – nur scheinbar paradox formuliert – wissenschaftlich begründbare medienpädagogische Normen finden, die sich den genannten Normierungen widersetzen und entziehen? Inwiefern führt die Einführung von Laptopklassen oder Smartboards im schulischen Bereich oder die Gestaltung von Videospielprojekten in der außerschulischen Medienbildung zu einer unreflektierten Sozialdisziplinierung, die als illegitime Form(atierung des Menschen verstanden werden kann? Der Schwerpunktteil

Fluchen und Flamen, um ein Mann zu sein? Die Verknüpfung von Geschlecht und Sprache durch Vorurteile

Directory of Open Access Journals (Sweden)

Nicola Döring

2001-11-01

Full Text Available Die hier besprochene Monographie der Linguistin Anja Gottburgsen beschäftigt sich theoretisch und empirisch mit sprachbezogenen Geschlechterstereotypen, also mit unseren Vorstellungen darüber, ob und wie Männer und Frauen jeweils in spezifischer und distinkter Weise sprachlich kommunizieren. Im Theorieteil der Arbeit wird der aktuelle Stand der soziolinguistischen und sozialpsychologischen Diskussion zu Geschlecht, Sprachverhalten und Stereotypisierung kritisch referiert und die Bedeutung von sprachbezogenen Geschlechterstereotypen erläutert. Im empirischen Teil berichtet die Autorin die Ergebnisse von drei Fragebogen-Studien mit deutschsprachigen Studierenden. Es zeigt sich, dass bei Studierenden unabhängig von Geschlecht und Geschlechtsrollenorientierung stereotype Vorstellungen über das sprachliche Verhalten von Männern und Frauen verbreitet sind.

Fatty acid composition of maize germ oil from high-oil hybrids wet-milling processing

Directory of Open Access Journals (Sweden)

Jovanović Petar Lj.

2005-01-01

Full Text Available Maize germ was obtained by wet-milling laboratory processing of domestic high-oil maize hybrids. After separation, the germ was subjected to extraction of maize oil. Fatty acid composition of maize germ oil was determined by gas chromatography. The results showed very high levels of unsaturated fatty acids and a constant sum of oleic and linoleic acids in oils of different maize hybrids.

Mathematical modelling of the performance of hydrodynamic couplings using hybrid models; Mathematische Modellierung des Betriebsverhaltens hydrodynamischer Kupplungen mit hybriden Modellansaetzen

Energy Technology Data Exchange (ETDEWEB)

Jaschke, P.

2000-02-01

Mathematical models of the dynamic performance of hydrodynamic couplings are developed using hybrid modelling, i.e. a combination of analytical physical modelling and black box identification. The models developed were verified by measurements on a model powertrain. [German] In dieser Arbeit werden mit Hilfe der hybriden Modellierung mathematische Modelle zur Beschreibung des dynamischen Betriebsverhaltens hydrodynamischer Kupplungen ermittelt. Die Hybride Modellierung stellt eine Kombination der analytisch physikalischen Modellierung und der Black-Box-Identifikation dar. Diese Modellierungsart ist ausgewaehlt worden, um die Vorteile der analytisch physikalischen Modellierung und der Black-Box-Identifikation hydrodynamischer Kupplungen zu verbinden und deren Nachteile gering zu halten. Auf dieser Basis ist eine Vorgehensweise vorgestellt worden, die die Ermittlung der Modelle mit wenig Aufwand ermoeglicht. Mit Hilfe der Modelltheorie wird gezeigt, wie die ermittelten mathematischen Modelle zur Simulation des dynamischen Betriebsverhaltens geometrisch aehnlicher Kupplungen unterschiedlicher Baugroessen verwendet werden koennen. Darueber hinaus wird dargelegt, wie die ermittelten Modelle mit Modellen anderer Antriebsstrangelemente gekoppelt werden koennen, um Antriebsstrangsimulationen zu ermoeglichen. Verifikationsmessungen an einem Modellantriebsstrang verdeutlichen die Guete und Verwendbarkeit der mathematischen Modelle. (orig.)

Editorial: Informationstechnische Bildung und Medienerziehung

Directory of Open Access Journals (Sweden)

Annemarie Hauf-Tulodziecki

2001-10-01

Full Text Available Die schulische Medienerziehung bzw. die Medienbildung hat ihre derzeit hohe öffentliche Aufmerksamkeit nicht zuletzt der Tatsache zu verdanken, dass gerade die so genannten «Neuen Medien» - heute oft mit den Schlagworten «Multimedia» oder «Internet» abgekürzt - wichtige Erziehungs- und Bildungsmassnahmen erforderlich machen. In der öffentlichen Diskussion gehören inhaltliche Kurzschlüsse zur Tagesordnung: Wenn von «Medienkompetenz» die Rede ist, verbirgt sich dahinter häufig nur ein «Internetführerschein». Diese Beobachtung ärgert nicht nur Medienpädagogen, sondern auch Vertreter einer Informationstechnischen Bildung (1, da berechtigte pädagogische Ansprüche beider Gruppen wenig Beachtung finden. Mittlerweile gibt es eine Reihe von Empfehlungen von BLK und KMK zu diesem Thema, in denen zudem deutlich auf die wechselseitigen Bezüge hingewiesen werden. Die wachsende Bedeutung des Mediums Computer und die weiter zunehmende Digitalisierung traditioneller Medien erfordert sowohl für die Medienerziehung als auch für die Informatische Bildung eine Weiterentwicklung ihrer Ziele und Inhalte. Die Gesellschaft für Informatik e.V. hat 1999 in ihrer Empfehlung «Informatische Bildung und Medienerziehung» aus ihrer Perspektive dargestellt, welche Aufgaben auf die Medienerziehung zukommen, wenn auch die Informations- und Kommunikationstechnologien bzw. die computerbasierten Medien in einer angemessenen Form thematisiert werden sollen. Erste praktische Ansätze, Inhalte aus beiden Bereichen bewusst zusammenzuführen, auch unter einer gemeinsamen Fach- oder Kursbezeichnung, sind häufig additiv und orientieren sich – trotz vorhandener Überschneidungen – an den etablierten medienpädagogischen oder an den informatischen Unterrichtsprinzipien. In dem vorliegenden Themenheft wird aus einer übergeordneten, medienpädagogischen Perspektive die Frage gestellt, wie eine konsistente Weiterentwicklung der Medienerziehung unter angemessener

Preparation of Pt Ag alloy nanoisland/graphene hybrid composites and its high stability and catalytic activity in methanol electro-oxidation

Directory of Open Access Journals (Sweden)

Feng Lili

2011-01-01

Full Text Available Abstract In this article, PtAg alloy nanoislands/graphene hybrid composites were prepared based on the self-organization of Au@PtAg nanorods on graphene sheets. Graphite oxides (GO were prepared and separated to individual sheets using Hummer's method. Graphene nano-sheets were prepared by chemical reduction with hydrazine. The prepared PtAg alloy nanomaterial and the hybrid composites with graphene were characterized by SEM, TEM, and zeta potential measurements. It is confirmed that the prepared Au@PtAg alloy nanorods/graphene hybrid composites own good catalytic function for methanol electro-oxidation by cyclic voltammograms measurements, and exhibited higher catalytic activity and more stability than pure Au@Pt nanorods and Au@AgPt alloy nanorods. In conclusion, the prepared PtAg alloy nanoislands/graphene hybrid composites own high stability and catalytic activity in methanol electro-oxidation, so that it is one kind of high-performance catalyst, and has great potential in applications such as methanol fuel cells in near future.

Application profile and requirements on fuel cell heat-and-power stations; Einsatzprofil und Anforderungen an Brennstoffzellen-HKW

Energy Technology Data Exchange (ETDEWEB)

Kruhl, J

1999-12-31

In centralized power supply systems, maximum electrical efficiency is required in order to achieve competitiveness with high-efficiency combined-cycle systems. Combined systems of high-temperature fuel cells (MCFC/SOFC) with integrated gas or steam turbine processes are a promising option. In decentralized power supply, low-temperature and medium-temperature fuel cells (PEMFC/PAFC) may be feasible as well provided that the temperature characteristic of the demand side permits the use of the heat generated. In view of the decreasing heat demand of classic cogeneration structures, costly district heating will in the long run be replaced by building-specific cogeneration solutions. In this field, high-efficiency fuel cell systems have advantages over small-scale cogeneration units. If power-specific investments are low, the new technology may be more favourable than separate supply systems with networks and heating boilers and, in consequence, may gain wider acceptance. (orig.) [Deutsch] In der zentralen Stromerzeugung erfordert der Wettbewerb mit hocheffizienten GuD-Anlagen die Maximierung des elektrischen Wirkungsgrades. Hierzu bieten sich Kombianlagen aus Hochtemperatur-Brennstoffzellen (MCFC/SOFC) mit integrierten Dampf- bzw. Gasturbinen-Prozessen an. Im dezentralen Versorgungsbereich bieten zusaetzlich Nieder- und Mitteltemperatur-Brennstoffzellen (PEMFC/PAFC) ein hohes Einsatzpotential, sofern die Temperaturcharakteristik des Bedarfs eine Nutzbarkeit der entstehenden Waerme zulaesst. Unter dem Aspekt des zukuenftig sinkenden Waermebedarfs klassischer KWK-Strukturen wird die kostenintensive Nahwaermeversorgung zunehmend durch gebaeudespezifische KWK-Loesungen verdraengt werden. In diesem Bereich bieten hocheffiziente Brennstoffzellen-Systeme deutliche Vorteile gegenueber motorischen Klein-BHKW. Werden hier geringe leistungsspezifische Investitionen erreicht, kann eine Wirtschaftlichkeit gegenueber der getrennten Versorgung durch Netz und Heizkessel gegeben sein

Die Mobilisierung des Kostüms. Überlegungen zur Rolle des Rockes in formeller und halbformeller Kleidung

Directory of Open Access Journals (Sweden)

Charlotte Giese

2009-07-01

Full Text Available Die seriöse Repräsentation von Staat und Unternehmen ist untrennbar verbunden mit dem Herrenanzug und seinem weiblichen Pendant, dem Hosenanzug. Auch das Kostüm, die Kombination aus Jackett und Rock, ist an den Herrenanzug angelehnt und war den damaligen Kleidungskonventionen entsprechend eher da als der weibliche Hosenanzug. Dieser Beitrag befasst sich mit der heutigen Bedeutung des Rockes für formal-repräsentative Anlässe und seinen halbformellen Weiterentwicklungen. Der Rock wird in urbaner Alltagskleidung zunehmend ersetzt durch eine Kleidung-Körper-Formation aus enger Hose und Frauenbein. Die Anpassung des Outfits an das urbane Mobilitätsverhalten und die Codierung des Kostüms als weiblich verdrängen ihn zunehmend aus der (halb-formellen Alltagskleidung.Serious representation of the self in politics and business often goes hand in hand with the man’s suit and its feminine counterpart, the pantsuit. The combination of jacket and skirt is also related to the man’s suit and in the past was more common than the feminine pantsuit. This study examines the skirt’s meaning today for representative formal occasions as well as the skirt’s increasingly semiformal nature. In today’s urban clothing environment more and more skirts are being replaced by a hybrid formation between dress and body. This consists of tight pants that accentuate women’s legs. The fact that the skirt remains coded as feminine and that outfits increasingly conform to fit urban mobility means that the skirt has been excluded from (semiformal wear.

Global Governance und libertärer Paternalismus: Akteure, Normativität und Legitimität

Directory of Open Access Journals (Sweden)

Mende Janne

2016-07-01

Full Text Available Der libertäre Paternalismus weist ähnliche Bezugspunkte auf wie die Global Governance. Bei beiden handelt es sich um ein Bündel staatlicher und nichtstaatlicher Steuerungsversuche, die auf eine Lösung individueller und gesellschaftlicher Probleme abzielen. Eine Verschränkung der Perspektiven beider Konzepte verhilft zu einer genaueren Konturierung ihrer konzeptuellen und normativen Prämissen und zu einer Diskussion ihrer Engführungen und Stärken. Deutlich wird: Der normative Bezugsrahmen des ‚besseren Lebens‘ für die Einzelne (Nudging oder für die Gesellschaft (Global Governance benötigt jeweils genauere Bestimmungen des Verhältnisses von Freiheit und Struktur. Die Regulierungsfähigkeit staatlicher und nichtstaatlicher Akteure wird durch jeweils offenzulegende Legitimitätsannahmen bestimmt. Aus der Perspektivenverschränkung ergeben sich Fragen nach der Strukturierung von Entscheidungsräumen in Global Governance (Nudging Governance und nach den Kriterien für eine Regulierung des libertären Paternalismus (Governing Nudges. Eine Diskussion dieser Fragen ist unabdingbar für eine reflexive Fundierung der Kritik oder der Weiterentwicklung der Konzepte.

Das Sabbatjahr für Lehrerinnen und Lehrer: Wer profitiert und in welcher Form?

OpenAIRE

Rothland, Martin

2013-01-01

Das Sabbatjahr für Lehrerinnen und Lehrer wird programmatisch als Maßnahme der Belastungsreduktion, der Regeneration sowie der Ressourcenstärkung diskutiert. Empirische Belege für die erwarteten Effekte finden sich jedoch kaum. Im Rahmen einer Längsschnittstudie mit drei Erhebungszeitpunkten vor, während und nach dem Sabbatjahr werden die Entwicklung der Belastungswahrnehmung, des Gesundheitszustands und allgemeiner sowie arbeitsbezogener Emotionen (Berufs- und Lebenszufriedenheit) auf der Ba...

Forschende und ihre Daten: Ergebnisse einer österreichweiten Befragung. Report 2015 – Executive Summary und Empfehlungen

Directory of Open Access Journals (Sweden)

Bruno Bauer

2015-01-01

Full Text Available Der vorliegende Beitrag bringt Executive Summary und Empfehlungen aus „Forschende und ihre Daten: Ergebnisse einer österreichweiten Befragung. Report 2015“. Dieser Report gibt einen Überblick über die österreichweite Befragung zu Forschungsdaten, die im Rahmen des Projekts e-Infrastructures Austria 2015 durchgeführt wurde. Diese richtete sich an das wissenschaftliche und künstlerisch-wissenschaftliche Personal aller 21 öffentlichen Universitäten sowie an drei außeruniversitäre Forschungseinrichtungen in Österreich. Die Teilnehmenden wurden zu folgenden Themenbereichen befragt: Datentypen und Formate; Datenarchivierung, -sicherung und -verlust; ethische und rechtliche Aspekte; Zugänglichkeit und Nachnutzung; Infrastruktur und Services. Die in diesem Kontext erstmals auf nationaler Ebene durchgeführte Befragung diente der Erhebung des praktischen Umgangs mit Forschungsdaten in Österreich und ist somit die Basis für eine konsekutive Optimierung der zweckdienlichen Infrastruktur, für eine Anpassung der Serviceangebote sowie für eine Neuorientierung bei der Ermittlung von Ressourcen in diesem strategischen Bereich entsprechend der geäußerten Bedürfnisse der im Forschungsprozess Tätigen.

Bewältigungsstrategien der Oberwalliser Primarlehrpersonen und Massnahmen der Gesundheitsförderung an Oberwalliser Primarschulen bei Stress und Burnout

OpenAIRE

Imhof, Barbara; Mattig, Astrid

2009-01-01

Die vorliegende Studie befasst sich mit der Gesundheitsförderung bei Stress und Burnout an den Oberwalliser Primarschulen und der Bewältigungsstrategien der Oberwalliser Primarlehrpersonen bei Stress und Burnout. Der theoretische Teil befasst sich mit Stress und Burnout und der Bewältigung von Stress und Burnout. Verschiedene Aspekte des Lehrerberufs werden näher angeschaut und es werden mögliche Massnahmen der Gesundheitsförderung bei Stress und Burnout aufgeführt. Die Untersuchung zeigt, da...

Trauma und Terror

OpenAIRE

Szyszkowitz, T. (Tessa)

2007-01-01

1. Einleitung Ausgehend von der Fragestellung, warum gerade bei Tschetschenen und Palästinensern der Selbstmordterrorismus in den letzten Jahren so populär geworden ist, analysiert die Autorin die Geschichte dieser beiden Völker. Einer der Gründe ist bisher wenig beachtet worden. Der Einfluss eines kollektiven Traumas, das als solches nicht anerkannt, behandelt und auch nicht einer politischen Lösung zugeführt wurde. 2. Geschichte der Palästinenser und Tschetschenen Im Zuge der Err...

Fabrication and characterization of high impact hybrid matrix composites from thermoset resin and dyneema-glass fabric reinforcement

Science.gov (United States)

Patel, R. H.; Sharma, S.; Pansuriya, T.; Malgani, E. V.; Sevkani, V.

2018-05-01

Hybrid composites have been fabricated by hand lay-up technique with epoxy resin and diethylene tri amine as a hardener for high impact energy absorption with sandwich stacking of different reinforcements of dyneema and glass fabric. High impact grade composites are nowadays gaining a lot of importance in the field of high mechanical load bearing applications, ballistics and bulletproofing. The present work emphases on the fabrication and mechanical properties of the hybrid composites of cut resistant dyneema fabric along with glass fabric reinforced in the thermosetting resin. i.e. epoxy. The prime importance while fabricating such materials have been given to the processing along with selection of the raw materials. High impact resistive materials with low density and henceforth low weight have been manufactured and characterized by IZOD impact tester, UTM, Archimedes density meter and SEM. Throughout the work, satisfactory results have been obtained. Impact resistance was observed to be boosted three times as that of the reference sample of glass fabric and epoxy. The density of the hybrid composite is observed to be 25% as that of the reference sample.

[St. Petersburg und Livland - und die Entwicklung der estnischen Literatur : Anton Schiefner (1817-1879) und Friedrich R. Kreutzwald (1803-1882) im Briefwechsel (1853-1879)] / Felix Köther

Index Scriptorium Estoniae

Köther, Felix

2015-01-01

Arvustus: St. Petersburg und Livland - und die Entwicklung der estnischen Literatur : Anton Schiefner (1817-1879) und Friedrich R. Kreutzwald (1803-1882) im Briefwechsel (1853-1879) / bearbeitet von Hartmut Walravens. Wiesbaden : Harrassowitz, 2013. (Orientalistik-Bibliographien und Dokumentationen ; Bd. 22)

Work-Life-Balance und Frauenbiographien

OpenAIRE

Macha, Hildegard

2006-01-01

Work-Life-Balance und Frauenbiographien. - In: Bildungs- und Karrierewege von Frauen / Anne Schlüter (Hrsg.). - Opladen : Budrich, 2006. - S. 17-32. - (Reihe: Frauen- und Geschlechterforschung in der Erziehungswissenschaft ; 2)

Hybrid Composite Material and Solid Particle Erosion Studies

Science.gov (United States)

Chellaganesh, D.; Khan, M. Adam; Ashif, A. Mohamed; Ragul Selvan, T.; Nachiappan, S.; Winowlin Jappes, J. T.

2018-04-01

Composite is one of the predominant material for most challenging engineering components. Most of the components are in the place of automobile structure, aircraft structures, and wind turbine blade and so on. At the same all the components are indulged to mechanical loading. Recent research on composite material are machinability, wear, tear and corrosion studies. One of the major issue on recent research was solid particle air jet erosion. In this paper hybrid composite material with and without filler. The fibre are in the combination of hemp – kevlar (60:40 wt.%) as reinforcement using epoxy as a matrix. The natural material palm and coconut shell are used as filler materials in the form of crushed powder. The process parameter involved are air jet velocity, volume of erodent and angle of impingement. Experiment performed are in eight different combinations followed from 2k (k = 3) factorial design. From the investigation surface morphology was studied using electron microscope. Mass change with respect to time are used to calculate wear rate and the influence of the process parameters. While solid particle erosion the hard particle impregnates in soft matrix material. Influence of filler material has reduced the wear and compared to plain natural composite material.

A novel ZnO@Ag@Polypyrrole hybrid composite evaluated as anode material for zinc-based secondary cell

OpenAIRE

Jianhang Huang; Zhanhong Yang; Zhaobin Feng; Xiaoe Xie; Xing Wen

2016-01-01

A novel ZnO@Ag@Polypyrrole nano-hybrid composite has been synthesized with a one-step approach, in which silver-ammonia complex ion serves as oxidant to polymerize the pyrrole monomer. X-ray diffraction (XRD) and infrared spectroscopy (IR) show the existence of metallic silver and polypyrrole. The structure of nano-hybrid composites are characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which demonstrates that the surface of ZnO is decorated with n...

Herausforderungen kleiner und mittlerer Unternehmen

Science.gov (United States)

Bergmann, Lars; Crespo, Isabel

Vielfältige externe Herausforderungen, hervorgerufen durch die Dynamik, mit der sich die wirtschaftliche, technologische, soziokulturelle sowie politische Umwelt wandelt, muss jedes Unternehmen im Laufe der Zeit bestehen (Zäpfel 2000). Diese Herausforderungen werden heute insbesondere durch eine Globalisierung der Wettbewerbssowie Nachfragestrukturen verstärkt. Immer schnellere Prozessund Produktinnovationen, kürzere Produktlebenszyklen und Entwicklungszeiten, eine rasant steigende Variantenvielfalt, Nachfrageschwankungen sowie rasante Entwicklungen der Informations- und Kommunikationstechnologien sind einige der sich schnell verändernden Rahmenbedingungen. Zudem müssen sich Unternehmen an neue Gesetze und rechtliche Rahmenbedingungen anpassen. Im Bereich der Roh- und Einsatzstoffe sind Veränderungen insbesondere durch sich verknappende Rohstoffe und Primärenergieträger und in Folge dessen durch drastische Preissteigerungen für Materialien, Hilfsstoffe, Werkzeuge etc. geprägt.

[Die baltischen Lande im Zeitalter der Reformation und Konfessionalisierung. Livland, Estland, Ösel, Ingermanland, Kurland und Lettgallen. Stadt, Land und Konfession 1500-1721. Teil I] / Heinrich Wittram

Index Scriptorium Estoniae

Wittram, Heinrich, 1931-

2011-01-01

Arvustus : Die baltischen Lande im Zeitalter der Reformation und Konfessionalisierung. Livland, Estland, Ösel, Ingermanland, Kurland und Lettgallen. Stadt, Land und Konfession 1500-1721. Teil I. Münster : Aschendorff, 2009. (Katholisches Leben und Kirchenreform im Zeitalter der Glaubensspaltung, 69)

The concept of a novel hybrid smart composite reinforced with radially aligned zigzag carbon nanotubes on piezoelectric fibers

International Nuclear Information System (INIS)

Ray, M C

2010-01-01

A new hybrid piezoelectric composite (HPZC) reinforced with zigzag single-walled carbon nanotubes (CNTs) and piezoelectric fibers is proposed. The novel constructional feature of this composite is that the uniformly aligned CNTs are radially grown on the surface of piezoelectric fibers. A micromechanics model is derived to estimate the effective piezoelectric and elastic properties. It is found that the effective piezoelectric coefficient e 31 of the proposed HPZC, which accounts for the in-plane actuation, is significantly higher than that of the existing 1-3 piezoelectric composite without reinforcement with carbon nanotubes and the previously reported hybrid piezoelectric composite (Ray and Batra 2009 ASME J. Appl. Mech. 76 034503)

Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites.

Science.gov (United States)

Braga, R A; Magalhaes, P A A

2015-11-01

This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced epoxy hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Epoxy resin, jute and glass fibers were laminated in three weight ratios (69/31/0, 68/25/7 and 64/18/19) respectively to form composites. The tensile, flexural, impact, density, thermal and water absorption tests were carried out using hybrid composite samples. This study shows that the addition of jute fiber and glass fiber in epoxy, increases the density, the impact energy, the tensile strength and the flexural strength, but decreases the loss mass in function of temperature and the water absorption. Morphological analysis was carried out to observe fracture behavior and fiber pull-out of the samples using scanning electron microscope. Copyright © 2015 Elsevier B.V. All rights reserved.

Facile preparation of well-combined lignin-based carbon/ZnO hybrid composite with excellent photocatalytic activity

Science.gov (United States)

Wang, Huan; Qiu, Xueqing; Liu, Weifeng; Yang, Dongjie

2017-12-01

In this work, a novel lignin-based carbon/ZnO (LC/ZnO) hybrid composite with excellent photocatalytic performance was prepared through a convenient and environment friendly method using alkali lignin (AL) as carbon source. The morphological, microstructure and optical properties of the as-prepared LC/ZnO hybrid composite was characterized with scanning electron microscope (SEM), X-ray diffraction (XRD), Raman and UV-vis. The resulting LC/ZnO hybrid is composed of highly dispersed ZnO nanoparticles embedded on a lignin-based carbon nanosheet, showing excellent photogenerated electrons and holes separation and migration efficiency. The photocatalytic activity of LC/ZnO was much higher than the pure ZnO. The LC/ZnO hybrid composite showed different photocatalytic mechanism for degradation of negative methyl orange (MO) and positive Rhodamine B (RhB). It showed that h+ was the main photocatalytic active group during the degradation of MO, ·O2- and ·OH were the photocatalytic active groups during degradation of RhB. This reported photocatalyst with selective degradation of positive and negative organic dyes may have a great application prospect for photoelectric conversion and catalytic materials. Results of this work were of practical importance for high-valued utilization of lignin for carbon materials.

GIS und Fernerkundung für Landschaftsmonitoring und Landschaftsplanung

Science.gov (United States)

Blaschke, Thomas

2002-09-01

Der Beitrag beleuchtet die Rolle der Geographischen Informationsverarbeitung hinsichtlich der Aufgaben in der Umweltüberwachung. Dabei wird über etablierte "sektorale" Umweltbeobachtungssysteme (Boden, Wasser, Luft) hinaus zunehmend der Bedarf an einer integrativen Betrachtung der Landschaft deutlich, insbesondere in mittleren bis kleinen Maßstäben. Wie verändern sich ganze Landschaften in Deutschland, in Europa? Welches sind Bereiche kritischer Abnahme landschaftlicher Diversität? Wie können landschaftliche Vielfalt und Eigenart erhalten beziehungsweise deren Erhalt überwacht werden? Diese und weitere Fragen drängen sich vor allem bei der Erstellung langfristiger Szenarien der Veränderung ganzer Landschaften und in der Nachhaltigkeitsdiskussion auf.

High temperature superconductors in satellite communications. High power microwave resonators and filters in planar HTSC technology. Final report; Hochtemperatur-Supraleiter-Systeme in der Satellitenkommunikation. Leistungstaugliche Hochfrequenz-Resonatoren und -Filter in planarer HTSL-Technologie. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Baumfalk, A.; Kaiser, T.; Kolesov, S.; Chaloupka, H.; Piel, H.; Hein, M.

1999-07-31

Goal of the R and D project was the development of miniaturized HTSC resonators and filters. The work was divided into two main packages: ({alpha}) Systematic investigations of thin film samples, manufactured by partners of the common project as well as the development of characterization methods. ({beta}) Considerations of all relevant topics related to the design and manufacturing of high power filters with given specifications. The power handling capability of thin films is the most challenging issue in film production. A large variation in film quality could be observed that can cause problems in the realization of HTSC components. Employing the introduced concept of edge current free disk and ring resonators, high power HTSC filters can be realized with an improvement of 400 in power handling capability compared to other HTSC resonator types. During optimization of the unloaded quality factor, dielectric losses were identified to be the limiting factor. Two-pole, four-pole Chebyshev and four pole elliptic filters were developed and characterized and showed low loss and high power handling capability. (orig.) [German] Die Zielsetzung des F und E-Vorhabens war es, stark miniaturisierte leistungstaugliche Resonatoren und Filter auf der Basis von Hochtemperatur-supraleitenden Duennfilmen zu entwickeln. Die Arbeiten gliederten sich in zwei Teilbereiche: Einerseits wurden Methoden zur Hochfrequenz-Charakterisierung der zugrundeliegenden HTSL-Schichten entwickelt und systematische Untersuchungen an Proben schichtherstellender Verbundpartner durchgefuehrt. Andererseits wurden alle relevanten Teilprobleme zur Entwicklung hochleistungstauglicher Filter bearbeitet und entsprechende Problemloesungen entwickelt. Bei der Schichtherstellung stellte sich die geforderte Leistungstragfaehigkeit der HTSL-Schichten als besondere Herausforderung dar. Es wurde eine grosse Streuung der Filmqualitaet beobachtet, wodurch die Realisierung von Bauelementen erschwert werden kann. Die

Urban Combat Advanced Training Technology Architecture (Architecture de technologie avancee pour l’entrainement au combat urbain)

Science.gov (United States)

2018-01-01

NORTH ATLANTIC TREATY ORGANIZATION SCIENCE AND TECHNOLOGY ORGANIZATION AC/323(MSG-098)TP/740 www.sto.nato.int STO TECHNICAL...REPORT TR-MSG-098 Urban Combat Advanced Training Technology Architecture (Architecture de technologie avancée pour l’entraînement au combat urbain...NORTH ATLANTIC TREATY ORGANIZATION SCIENCE AND TECHNOLOGY ORGANIZATION AC/323(MSG-098)TP/740 www.sto.nato.int STO TECHNICAL

Zu den Grundlagen der visuellen Soziologie: Wahrnehmen und Sehen, Beobachten und Betrachten

OpenAIRE

Bachleitner, Reinhard; Weichbold, Martin

2015-01-01

In diesem Beitrag werden die visuellen Modi des Wahrnehmens – das Sehen, Beobachten und Betrachten – in ihrem Wesen skizziert, und die doppelte Theorieabhängigkeit von Wahrnehmungsprozessen wird thematisiert. Dabei zeigt sich, dass mehrere offene methodologische und erkenntnistheoretische Fragen durch die Differenzierung des Wahrnehmungsvorgangs in drei Stufen (reines Sehen, kognitive Repräsentation, Transformation des Perzepts in Worte) sowie die Differenzierung der Wahrnehmungsmodi in jewei...

“Get to the bridge and I will help you to cross”: Merit, Personal Connections and Money in Access to Nigerian Higher Education “Get to the bridge and I will help you to cross”: Leistung, persönliche Verbindungen und Geld und der Zugang zum Hochschulstudium in Nigeria

Directory of Open Access Journals (Sweden)

Chris Willott

2011-01-01

Full Text Available This article examines the methods students use to gain access to a university in Nigeria’s elite federal sector. It explains the relationships between three “currencies” – merit, personal connections and money – that are utilised by students to achieve their goals. I argue that influences representing the official rules – merit – and those representing semi-official or unofficial processes – personal connections and money – intersect in ways that reveal the complexity of the relationship between state and society in contemporary Nigeria. This analysis reveals that in this case the hybrid interpretation of the neopatrimonial state, which views official and unofficial norms as existing in parallel and suffusing one another, has more analytical value than its counterpart, the wholesale state privatisation thesis.Dieser Aufsatz untersucht, welche Möglichkeiten Studierende nutzen, um die Aufnahme an einer (bundesstaatlichen Eliteuniversität in Nigeria zu erreichen. Der Autor beschreibt das Verhältnis von drei unterschiedlichen Zugangs-„Währungen“ – Leistung, persönliche Verbindungen und Geld –, die zu diesem Zweck eingesetzt werden. Er argumentiert, dass sich Zugangsmöglichkeiten nach offiziellen Regelungen, die vor allem auf Leistung beruhen, mit halb- oder inoffiziellen Wegen überschneiden, wie dem Einsatz von persönlichen Verbindungen und/oder Geld. In dieser Interdependenz sieht er einen Ausdruck der Komplexität der Beziehung zwischen Staat und Gesellschaft im heutigen Nigeria. Seine Analyse deckt auf, dass in diesem Fall die hybride Interpretation des neopatrimonialen Staates, wonach offizielle und inoffizielle Normen parallel existieren und einander durchdringen, größeren analytischen Wert besitzt als ihr Gegenstück, die These von der umfassenden Privatisierung staatlicher Strukturen.

Polypeptide composition of fraction 1 protein of the somatic hybrid between Petunia parodii and Petunia parviflora.

Science.gov (United States)

Kumar, A; Wilson, D; Cocking, E C

1981-04-01

The analysis of the subunit polypeptide composition of Fraction 1 protein provides information on the expression of both chloroplast and nuclear genomes. Fraction 1 protein, isolated from leaves of the somatic hybrid plants derived form the fusion of protoplasts of Petunia parodii and P. parviflora, was analyzed for its subunit polypeptide composition by isoelectric focusing in 8 M urea. The fraction 1 protein enzyme oligomer in the somatic hybrid plants contained small subunits resulting from the expression of both parental nuclear genomes, but probably only one of the parental large subunits, namely that of P. parodii. The relevance of such somatic hybrid material for the study of nucleocytoplasmic interrelationship is discussed, as well as the use of these fraction 1 protein isoelectric focusing patterns for the analysis of taxonomic relationships in Petunia.

Soziologische Wissenskulturen zwischen individualisierter Inspiration und prozeduraler Legitimation. Zur Entwicklung qualitativer und interpretativer Sozialforschung in der deutschen und französischen Soziologie seit den 1960er Jahren

Directory of Open Access Journals (Sweden)

Reiner Keller

2016-01-01

Full Text Available Wie wissen Soziologinnen und Soziologen, was sie wissen? Trotz der Internationalisierung der Soziologie bestehen nach wie vor starke sprachräumliche Unterschiede in der soziologischen Wissensproduktion, in eingesetzten Theorien, Methoden und Fragestellungen. Der nachfolgende Beitrag erläutert die Entwicklung und Ausprägung der Unterschiedlichkeit soziologischer Wissenskulturen im Hinblick auf den Einsatz qualitativer bzw. interpretativer Ansätze seit den 1960er Jahren in Deutschland und Frankreich. Er stützt sich auf ein von uns 2012-2014 geleitetes Forschungsprojekt und dessen empirische Grundlagen: Dokumentenanalysen und Interviews. Wissenskulturen werden als die Arten und Weisen der Produktion und Legitimation von (hier: soziologischem Wissen verstanden. Diesbezüglich lässt sich von der Erkenntnisproduktion als dem zentralen Handlungsproblem soziologischen Forschens sprechen. Während für die französischsprachige Soziologie diagnostisch von einer Lösung dieses Erkenntnisproblems durch die den Forschenden zugeschriebenen Kompetenzen und Inspirationen ausgegangen werden kann, schiebt sich im deutschsprachigen Raume eine prozedurale Legitimation durch Verfahren in den Vordergrund. Der Beitrag rekonstruiert exemplarisch die Ausgangssituation dieser Entwicklungen um die Wende zu den 1960er Jahren und bettet sie in die weitere Entfaltung der jeweiligen Soziologien ein. Er will damit zur gegenwärtigen Entwicklung einer reflexiven Soziologie beitragen. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1601145

Aerosol vertical distribution, new particle formation, and jet aircraft particle emissions in the free troposhere and tropopause region; Vertikalverteilung und Neubildungsprozesse des Aerosols und partikelfoermige Flugzeugemissionen in der freien Troposphaere und Tropopausenregion

Energy Technology Data Exchange (ETDEWEB)

Schroeder, F P

2000-07-01

A contribution to the understanding of natural and anthropogenously induced particle formation as well as aerosol physical transformation processes within the free troposphere (FT) is introduced. Documentation and interpretation of empirical data relevant with respect to possible climatologic impact of anthropogenous aerosol emissions into the atmosphere is presented. The first section describes new technique for high spatial resolution measurements of ultrafine aerosol particles by condensation nucleus counters (CNCs), a necessary prerequisite for the observation of natural particle formation and jet aircraft emissions. The second section illustrates vertical distribution and variability ranges of the aerosol in the FT and the tropopause region (TP). Typical microphysical states of the atmospheric aerosol within the Northern Hemisphere are documented by means of systematic measurements during more than 60 flight missions. Simple mathematical parameterizations of the aerosol vertical distribution and aerosol size distributions are developed. Important aerosol sources within the FT are localized and possible aerosol formation processes are discussed. The third section is focussed on jet-engine particle emissions within the FT and TP. A unique inflight experiment for detection of extremely high concentrations (>10{sup 6} cm{sup -3}) of extremely small (donw to <3 nm) aerosols inside the exhaust plumes of several jet aircraft is described. Particle emission indices and emission-controlling parameters are deduced. Most important topic is the impact of fuel sulfur content of kerosine on number, size and chemical composition of jet particle emissions. Generalized results are parameterized in form of lognormal aerosol particle size distributions. (orig.) [German] Ein Beitrag zum Verstaendnis natuerlicher und anthropogen induzierter Aerosolneubildung sowie physikalischer Aerosolumwandlung in der freien Troposphaere wird vorgestellt. Empirisch gewonnenes Datenmaterial wird

The effect of fibre layering pattern in resisting bending loads of natural fibre-based hybrid composite materials

Directory of Open Access Journals (Sweden)

Jusoh Muhamad Shahirul Mat

2016-01-01

Full Text Available The effect of fibre layering pattern and hybridization on the flexural properties of composite hybrid laminates between natural fibres of basalt, jute and flax with synthetic fibre of E-glass reinforced epoxy have been investigated experimentally. Results showed that the effect fibre layering pattern was highly significant on the flexural strength and modulus, which were strongly dependent on the hybrid configuration between sandwich-like (SL and intercalation (IC sequence of fibre layers. In addition, specific modulus based on the variation densities of the hybrid laminates was used to discover the best combination either basalt, jute or flax with E-glass exhibits superior properties concerning on the strength to weight-ratio. Generally, SL sequence of glass/basalt exhibited superior strength and stiffness compared with glass/jute and glass/flax in resisting bending loads. In terms of hybridization effect, glass/jute was found to be the best combination with E-glass compared to the rest of natural fibres investigated in the present study. Hence, the proper stacking sequences and material selection are among predominant factors that influence on mechanical properties and very crucial in designing composite hybrid system to meet the desired requirements.

Neue Medien in der Lehrerausbildung. Zu angemessenen (und unangemessenen Zielen und Inhalten des Lehramtsstudiums

Directory of Open Access Journals (Sweden)

Sigrid Blömeke

2003-01-01

Full Text Available In vier Schritten wird dem Verhältnis von Lehrerausbildung und neuen Medien nachgegangen. Zunächst werden grundsätzliche medienpädagogische Aufgaben der Lehrerausbildung herausgearbeitet, bevor das Ausbildungsprofil ihrer ersten und zweiten Phase in den Blick genommen wird. Ausgangspunkt der Theoriebildung sind professions- und institutionentheoretische Ansätze, die auf die neuen Medien bezogen werden; Konkretisierungen erfolgen an Beispielen aus der Germanistik, der Anglistik, der Geschichte und der Mathematik. Anschliessend wird der Erwerb medienpädagogischer Kompetenz durch zukünftige Lehrerinnen und Lehrer von dem Erwerb basaler Medienkompetenz als eines Elements von Allgemeinbildung abgegrenzt. Zum Schluss werden Konsequenzen für die strukturelle Gestaltung der Lehrerausbildung gezogen.

Effect of different polishing systems on the surface roughness of nano-hybrid composites.

Science.gov (United States)

Patel, Brijesh; Chhabra, Naveen; Jain, Disha

2016-01-01

The study aimed to investigate the influence of different polishing systems on the surface roughness of nano-hybrid composite resins. Different shapes of polishing systems are available according to the site of work. To minimize variability, a new system with single shape is developed that can be utilized in both anterior as well as posterior teeth. Seventy composite discs were fabricated using Teflon well (10 mm × 3 mm). Two main group of nano-hybrid composite Group I - Filtek Z350 and Group II - Tetric N-Ceram were used (n = 35 for each group). Both groups were further divided into four subgroups. Subgroup a - OneGloss (n = 10), Subgroup b - PoGo (n = 10), Subgroup c - Sof-Lex spiral (n = 10), Subgroup d - Mylar strip (control, n = 5). Samples were polished according to the manufacturer's recommendations. Surface roughness test was performed using contact profilometer. The obtained data were analyzed using the one-way analysis of variance test. Tetric N-Ceram produced smoother surfaces than Filtek Z350 (P OneGloss" (P OneGloss" and "Sof-Lex Spiral."

Fatigue Life Analysis of Tapered Hybrid Composite Flexbeams

Science.gov (United States)

Murri, Gretchen B.; Schaff, Jeffery R.; Dobyns, Alan L.

2002-01-01

Nonlinear-tapered flexbeam laminates from a full-size composite helicopter rotor hub flexbeam were tested under combined constant axial tension and cyclic bending loads. The two different graphite/glass hybrid configurations tested under cyclic loading failed by delamination in the tapered region. A 2-D finite element model was developed which closely approximated the flexbeam geometry, boundary conditions, and loading. The analysis results from two geometrically nonlinear finite element codes, ANSYS and ABAQUS, are presented and compared. Strain energy release rates (G) obtained from the above codes using the virtual crack closure technique (VCCT) at a resin crack location in the flexbeams are presented for both hybrid material types. These results compare well with each other and suggest that the initial delamination growth from the resin crack toward the thick region of the flexbeam is strongly mode II. The peak calculated G values were used with material characterization data to calculate fatigue life curves and compared with test data. A curve relating maximum surface strain to number of loading cycles at delamination onset compared reasonably well with the test results.

Hybrid composite based on poly(vinyl alcohol) and fillers from renewable resources

Science.gov (United States)

Hybrid composite laminates consisting of polyvinyl alcohol (PVA) as continuous phase (33% by weight) and lignocellulosic fillers, derived from sugarcane bagasse, apple and orange waste (22% by weight) were molded in a carver press in the presence of water and glycerol such as platicizers agents. Cor...

Selection of compressors and drives for natural gas storage and transport - technical and economic aspects; Auswahl von Verdichtern und Antriebsmaschinen fuer die Erdgasspeicherung und den Erdgastransport - technische und wirtschaftliche Aspekte

Energy Technology Data Exchange (ETDEWEB)

Heyer, F.; Wieke, S. [Heyer und Wieke Engineering, Muenchen (Germany)

1998-12-31

Selection of the proper compressor/drive combination is indispensable for optimizing natural gas storage. The contribution presents a comparison of the available systems. (orig.) [Deutsch] Fuer die Verdichtung von Erdgas fuer die Erdgasspeicherung und den Erdgastransport ist die Auswahl der fuer den jeweiligen Anwendungsfall geeigneten Verdichter-Antriebskombination eine wesentliche Voraussetzung fuer einen technisch und wirtschaftlich optimalen Betrieb. Unter Beruecksichtigung des Marktes werden die Varianten (Verdichter-Antriebskombinationen) definiert und in einem technischen Vergleich Vor- und Nachteile der einzelnen Alternativen gegenuebergestellt und bewertet. Die Einhaltung der Betriebsanforderungen und der Anforderungen der TA-Luft und TA-Laerm, der Wirkungsgrad, die Zuverlaessigkeit und Verfuegbarkeit muessen einer besonders intensiven Pruefung und Beurteilung unterzogen werden. Das Ergebnis der vergleichenden Bewertung der Varianten kann eine neue Definition der Varianten oder der Anforderungen notwendig machen. (orig.)

In vitro-Permeationsstudien von hydrophilen und lipophilen Arzneistoffen an okularen Geweben und Zellkulturen

OpenAIRE

Scholz, Martina

2003-01-01

Da die Arzneistoffpermeation durch okulare Gewebe einen entscheidenden Einfluss auf die Heilung vieler Augenleiden hat, wurde die in vitro-Permeation hydrophiler und lipophiler Arzneistoffe durch okulare Gewebe und Zellkulturen in dieser Arbeit untersucht. Die Dissertation befasst sich vorrangig mit der Permeation des hydrophilen Modellarzneistoffs Pilocarpinhydrochlorid (P-HCl) durch isolierte Schweinecornea (SC), Schweinesklera, Kaninchenkonjunktiva und corneale bzw. konjunktivale Kan...

Influence of Hybrid Fillers on Thermal Conductivity of Nylon-6/Graphene Composites

Directory of Open Access Journals (Sweden)

SONG Na

2018-03-01

Full Text Available The thermal insulating properties of polymer greatly restrict the application of polymer as the thermal conductivity materials in industry. Multilayer graphene was chosen as a filler due to its unique thermal transfer property. The effect of alumina oxide (Al2O3 and silicon carbide (SiC with graphene as hybrid fillers on thermal conductivity of polymers was also explored. The thermal conductivity of the composites enhances 161% with 3%(mass fraction graphene content compared to pure nylon-6(PA6. The thermal conductivity of PA6 composites is within 0.653-4.307W·m-1·K-1 by adjusting hybrid fillers content and the ratio of graphene with Al2O3 and SiC. The best thermal conductivity is 20 times higher than the pure PA6. It is no doubt that the exploration can provide valuable experimental basis for extending the utilization of graphene as thermal conductivity filler and the application of PA6 thermal conductivity materials in industry.

Finanzkrise, Sozialkrise und ungleiche Entwicklung in Südkorea und Thailand

DEFF Research Database (Denmark)

Schmidt, Johannes Dragsbæk

2008-01-01

Zehn Jahre ist es inzwischen her, dass die Finanzkrisen in Südostasien, Russland und Lateinamerika die Weltwirtschaft erschütterten. Angesichts dieses "Jubiläums" und der aktuellen US-Finanzkrise ist es Zeit für eine Bestandsaufnahme: Lektionen gelernt? Drei Fragestellungen stehen im Mittelpunkt...

A study of nitroxide polyradical/activated carbon composite as the positive electrode material for electrochemical hybrid capacitor

Energy Technology Data Exchange (ETDEWEB)

Li, Hui-qiao; Zou, Ying; Xia, Yong-yao [Chemistry Department and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai 200433 (China)

2007-01-01

We present a new concept of the hybrid electrochemical capacitor technology in which a poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate) nitroxide polyradical/activated carbon composite (PTMA-AC) is used as the positive electrode material and activated carbon is used as the negative electrode material. On the positive electrode, both reversible reduction and oxidation of nitroxide polyradical and non-faradic ion sorption/de-sorption of activated carbon are involved during charge and discharge process. The capacity of the composite electrode is 30% larger than that of the pure activated carbon electrode. A hybrid capacitor fabricated by the PTMA-AC composite positive electrode and the activated carbon negative electrode shows a good cycling life, it can be charged/discharged for over 1000 cycles with slight capacity loss. The hybrid capacitor also has a good rate capability, it maintains 80% of the initial capacity even at the high discharge current of up to 20C. (author)

Flutter analysis of hybrid metal-composite low aspect ratio trapezoidal wings in supersonic flow

Directory of Open Access Journals (Sweden)

Shokrollahi Saeed

2017-02-01

Full Text Available An effective 3D supersonic Mach box approach in combination with non-classical hybrid metal-composite plate theory has been used to investigate flutter boundaries of trapezoidal low aspect ratio wings. The wing structure is composed of two main components including aluminum material (in-board section and laminated composite material (out-board section. A global Ritz method is used with simple polynomials being employed as the trial functions. The most important objective of the present research is to study the effect of composite to metal proportion of hybrid wing structure on flutter boundaries in low supersonic regime. In addition, the effect of some important geometrical parameters such as sweep angle, taper ratio and aspect ratio on flutter boundaries were studied. The results obtained by present approach for special cases like pure metallic wings and results for high supersonic regime based on piston theory show a good agreement with those obtained by other investigators.

Onion Hybrid Seed Production: Relation with Nectar Composition and Flower Traits.

Science.gov (United States)

Soto, Veronica C; Caselles, Cristian A; Silva, Maria F; Galmarini, Claudio R

2018-05-28

Onion (Allium cepa L.) is one of the main vegetable crops. Pollinators are required for onion seed production, being honeybees the most used. Around the world, two types of onion varieties are grown: open pollinated (OP) and hybrids. Hybrids offer numerous advantages to growers, but usually have lower seed yields than OP cultivars, which in many cases compromise the success of new hybrids. As pollination is critical for seed set, understanding the role of floral rewards and attractants to pollinator species is the key to improve crop seed yield. In this study, the correlation of nectar-analyzed compounds, floral traits, and seed yield under open field conditions in two experimental sites was determined. Nectar composition was described through the analysis of sugars, phenol, and alkaloid compounds. Length and width of the style and tepals of the flowers were measured to describe floral traits. Floral and nectar traits showed differences among the studied lines. For nectar traits, we found a significant influence of the environment where plants were cultivated. Nonetheless, flower traits were not influenced by the experimental sites. The OP and the male-sterile lines (MSLs) showed differences in nectar chemical composition and floral traits. In addition, there were differences between and within MSLs, some of which were correlated with seed yield, bringing the opportunity to select the most productive MSL, using simple determinations of morphological characters like the length of the style or tepals size.

Manufacturing and Machining Challenges of Hybrid Aluminium Metal Matix Composites

Science.gov (United States)

Baburaja, Kammuluri; Sainadh Teja, S.; Karthik Sri, D.; Kuldeep, J.; Gowtham, V.

2017-08-01

Manufacturing which involves material removal processes or material addition processes or material transformation processes. One or all the processes to obtain the final desired properties for a material with desired shape which meets the required precision and accuracy values for the expected service life of a material in working conditions. Researchers found the utility of aluminium to be the second largest after steel. Aluminium and its metal matrix composite possess wide applications in various applications in aerospace industry, automobile industry, Constructions and even in kitchen utensils. Hybrid Al-MMCconsist of two different materials, and one will be from organic origin along with the base material. In this paper an attempt is made to bring out the importance of utilization of aluminium and the challenges concerned in manufacturing and machining of hybrid aluminium MMC.

List of reports on reactor safety research from BMFT, CEA, EPRI, JSTA and USNRC

International Nuclear Information System (INIS)

1985-01-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning special Problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l' Energie Atomique (CEA), the Japan Science and Technologie Agency (JSTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these Reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programm of the BMFT, reporting organization. The list of reports appears quarterly. (orig./HP) [de

List of reports concerning reactor safety research from BMFT, CEA, EPRI, JSTA, and USNRC

International Nuclear Information System (INIS)

1982-12-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning special problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (JSTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these Reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programm of the BMFT, reporting organization. The list of reports appears quarterly. (orig./HP) [de

List of reactor safety research reports from BMFT, CEA, EPRI, JSTA and USNRC

International Nuclear Information System (INIS)

1982-07-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning special Problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (JSTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these Reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Program of the BMFT, reporting organization. The list of reports appears quarterly. (orig./HP) [de

Plazentaanatomie und -physiologie mit uteroplazentarem Kreislauf

NARCIS (Netherlands)

Engel, N.; Schreiber, J. U.; Kranke, Peter

2017-01-01

Die Plazenta besteht neben der Nabelschnur aus parenchymatösem Gewebe, der sog. Eihaut (Amnion) und der Zottenhaut (Chorion). Sie fungiert als Schnittstelle zwischen Mutter und Fetus und ermöglicht den physiologischen Transfer von Gasen, Nährstoffen und Metaboliten. Die Funktion der Plazenta ist als

Kunst und Revolution.John Berger und der sowjetische Bildhauer Ernst Neiswestni

OpenAIRE

Artinger, Kai

2011-01-01

John Berger war einer der einflussreichsten Kunstkritiker der Linken in den 1950er Jahren in Großbritannien. Er spielte eine zentrale Rolle in den Diskursen über die Situation der Kunst und ihre Zukunft. Bezeichnend für sein Kunstverständnis war es, ausgetretene Pfade zu verlassen und den herrschenden Kanon zu ignorieren. Daher erfasste sein Blick auch die osteuropäische Kunst. Seit 1953 besucht er mehrfach die UdSSR und die DDR. Als unabhängiger Marxist lehnte sich Berger an den Strategien...

Wirkungen eines Bifidojoghurts mit Laktulose und eines konventionellen Joghurts auf Darmphysiologie und bakterielle Metaboliten als Risikomodulatoren der Kolonkarzinogenese sowie Darmflora und Blutlipide bei gesunden Erwachsenen

OpenAIRE

Gerlach, Stefanie

2007-01-01

Hintergrund: Probiotische und synbiotische Milchprodukte zählen zu den "funktionellen Lebensmitteln", denen im Vergleich zu herkömmlichen Produkten ein gesundheitsfördernder Zusatznutzen zugeschrieben wird. Dabei wird diskutiert, ob die Gesundheit bereits gesunder Personen noch optimierbar ist, ob und in welcher Weise die Darmflora gezielt "günstig" modifiziert werden kann und/oder ob diese Manipulation zu messbaren gesundheitsfördernden Veränderungen metabolischer und systemischer Biomarker ...

Zwischen Freakout und Normcore

Directory of Open Access Journals (Sweden)

Beate Großegger

2017-06-01

Full Text Available Bis Ende des 20. Jahrhunderts war Rebellion jugendkulturell ein großes Thema. Heute hat die Jugend das so genannte Establishment aus den Augen verloren; die breite Mehrheit gibt sich postheroisch, setzt auf individualitätsbezogene Werte und träumt, eingeschlossen in ihre bunten Lifestyleblasen, von einem perfekten Leben. Bezugnehmend auf aktuelle Befunde der Jugend- und Generationenforschung gibt Beate Großegger in ihrem Beitrag einen Überblick über die wichtigsten Werte- und Lifestyletrends im frühen 21. Jahrhundert und zeigt dabei, wie sehr die heutige Jugend Kind ihrer Zeit und Produkt gesellschaftlicher Rahmenbedingungen ist. Until the late 20th century rebellion was an important aspect of various youth subcultures. But today’s youth has a different mindset. The majority acts post-heroically, i.e. they rather focus on their individual, their private lifestyle than opposing against the establishment. Wrapped in their lifestyle filterbubbles, they dream of a perfect life. Based on recent youth und generation studies Beate Großegger gives an overview of the most important youth cultural trends in the fields of values and lifestyles and introduces today’s youth as a child of our times.

The use of hybrid dry cooling towers/condensors; Einsatz von hybriden Trockenkuehltuermen/Verfluessigern

Energy Technology Data Exchange (ETDEWEB)

Mueller, W. [Jaeggi/Guentner AG, Feldmeilen (Switzerland). Niederlassung Ostschweiz

1998-03-01

The hybride dry cooling tower/condenser has a closed circuit and an air side heat transfer surface which can be wetted. It is used for recooling of a liquide fluid (Water/Glycole) or for condensation of refrigerant by outdoor air and by evaporation of water from a secondary loop. This cooling tower concept has higher first costs, but considerably lower annual costs compared with similar cooling systems. The economy can be shown by a calculated example. (orig.) [Deutsch] Der hybride Trockenkuehlturm/Verfluessiger hat einen geschlossenen Kreislauf und eine wasserbenetzbare, luftseitige Waermeuebertragungsflaeche. Er dient der Rueckkuehlung eines fluessigen Mediums (Wasser/Glykol) oder der Verfluessigung von Kaeltemitteln mittels Umgebungsluft und durch Verdunstung von Wasser aus einem Sekundaerkreislauf. Dieser Kuehlturm hat hoehere Investitionskosten, aber wesentlich tiefere Jahreskosten als aehnliche Kuehlsysteme. Die Wirtschaftlichkeit wird anhand eines gerechneten Beispiels nachgewiesen. (orig.)

Die Werte der Wertvermittler - Berufliches Rollenselbstverständnis und Weltanschauung von Journalistinnen und Journalisten

Directory of Open Access Journals (Sweden)

Andy Kaltenbrunner

2010-09-01

Full Text Available Der Beitrag analysiert professionelles Selbstverständnis, Weltanschauungen und ethische Überzeugungen von Journalistinnen und Journalisten in Österreich. Auf Basis aktueller Befragungen und Studien wird die Grundstruktur des journalistischen Wertesystems skizziert und der Zusammenhang mit täglicher Berichterstattung. Der Beitrag diskutiert mögliche Konsequenzen für Zukunft des Journalismus und Qualität der Öffentlichkeit. The article focuses on the professional values, political views and ethical beliefs of Austrian journalists. Based on recent surveys we outline the basic structure of the journalistic value system in Austria and the interdependence of these values and actual reporting and we discuss possible consequences for the future of journalism as a profession and for the quality of the public sphere.

Supraleitung Grundlagen und Anwendungen

CERN Document Server

Buckel, Werner

2013-01-01

Grundlegende Konzepte und Eigenschaften von Supraleitern, die Herstellung und Entwicklung von neuen supraleitenden Materialien sowie moderne Anwendungsbereiche sind die Schwerpunktthemen des Buches. Das größte Potential zur Nutzung der Supraleitung liegt in der Energietechnik. Fast unbemerkt trägt die Einführung von Kabeln, Magneten, Transformatoren oder Lagern aus supraleitenden Materialien bei zur Effizienzsteigerung bei der Stromübertragung oder in Motoren. Durch seiner klare Sprache und zahlreiche erläuternde Abbildungen eignet sich der Band hervorragend als einführendes Lehrbuch. Der Schwierigkeitsgrad wird von Kapitel zu Kapitel gesteigert. So können auch Einsteiger ohne einschlägige Vorkenntnisse dem Stoff folgen. Dank der über 350 Literaturhinweise bekommt der Leser außerdem einen Überblick über die wichtigsten Publikationen zum Thema. Ein unverzichtbares Lehrbuch also für Physik-Studenten und Studierende der Ingenieurwissenschaften. Fachleuten in Forschung und Praxis leistet das Buch au...

Editorial: Theoriebildung in Mediendidaktik und Wissensmanagement

Directory of Open Access Journals (Sweden)

Michael Kerres

2002-10-01

Full Text Available Das Internet trägt massgeblich zur Entstehung einer neuen Lern- und Wissenskultur bei und ist mittlerweile Gegenstand einer ganzen Reihe von Projekten in der Erziehungswissenschaft. So wird zum Beispiel der Frage nachgegangen, welche Möglichkeiten der Strukturierung und Gestaltung von Lernmaterialien am besten geeignet sind, um Lernprozesse anzuregen, wie die interpersonale Kommunikation im Internet durch didaktische Gestaltungsmassnahmen gefördert werden können oder wie die entfernte Betreuung von Lernenden über das Netz funktioniert. Zunehmend wird dabei auch der Übergang bedeutsam zwischen didaktisch aufbereiteten Lernangeboten, wie sie die Mediendidaktik traditionell beschäftigt, und dem Austausch von nicht didaktisch aufbereiteten Informationen in Organisationen, wie es im Bereich des Wissensmanagements diskutiert wird. In diesen Projekten werden vielfach Detailfragen behandelt, und isoliert, ohne Bezug zu grundlegenden Theoriefragen untersucht. Es mangelt an einer genuin mediendidaktischen Theoriediskussion, die einen übergreifenden Bezugsrahmen aus erziehungswissenschaftlicher Perspektive liefert. In der Vergangenheit ist die Mediendidaktik von Seiten einer «kritischen» Medienpädagogik zeitweise skeptisch beäugt und in ihrer Existenz grundlegend infrage gestellt worden. In der aktuellen Diskussion wird gerne auf lerntheoretische Ansätze zurückgegriffen, die Lernen als aktiven Vorgang der individuellen und kooperativen Wissenskonstruktion begreifen. Doch Wissens- und Lerntheorien ersetzen keine mediendidaktische Modell- und Theoriebildung, die Perspektiven für eine Gestaltung zukünftiger Lernwelten liefert und dabei zum Beispiel sowohl bildungstheoretische Überlegungen als auch Konzepte des instructional design einbezieht. In dem ersten Teil dieser Ausgabe geht es um theoretische Perspektiven der Mediendidaktik. So diskutiert der Artikel von Michael Kerres und Claudia de Witt den Beitrag der Positionen von Behaviorismus

Stabilization of backing-up operations of truck trailers and road trains by a control element; Stabilisierung der Rueckwaertsfahrt von LKW-Aufliegern und Gliederzuegen durch einen Regler

Energy Technology Data Exchange (ETDEWEB)

Schumacher, W. [Technische Univ. Braunschweig (Germany)

2001-07-01

Although modern trucks have many electronic systems, an integrated electronic steering system is still lacking. A demonstration model of an integrated, fully electronic powertrain - the X-by-wire system - was presented by DaimlerChrysler AG at the IAA Nutzfahrzeuge in September 2000. Among other functions, the system will facilitate backing-up of trucks with trailers or road trains. [German] Zahlreiche Systeme erleichtern LKW-Fahrern die Arbeit: z.B. Bremskraftverstaerker, Lenkkraftservos und elektronisch geschaltete Getriebe. Das grundsaetzliche Konzept der Fahrzeuglenkung bleibt jedoch erhalten: Der Fahrer greift auf einzelne Aggregate zu wie beispielsweise Motor, Bremse, Getriebe und Lenkung. Eine rein elektronische Steuerung ohne mechanische Verbindung, die eine gemeinsame Schnittstelle mehrerer oder aller Aggregate bereitstellen koennte, befindet sich gerade in der Entwicklung. Ein Demonstrationsmodell eines integrierten rein elektronisch ansteuerbaren Antriebsstrangs wurde von DaimlerChrysler AG auf der IAA Nutzfahrzeuge im September 2000 vorgestellt. Die X-by-wire Technologie eroeffnet voellig neue Moeglichkeiten fuer echte Fahrerassistenzsysteme, die nicht nur Kraftverstaerker sind, sondern auch Informationsverarbeitung betreiben. Ein Beispiel fuer ein solches System ist ein Rueckwaertsrangierassistent, der dem Fahrer bei der Rueckwaertsfahrt mit Auflieger oder Gliederzug die schwierige Aufgabe abnimmt, das ungewollte Einknicken des Zuges zu verhindern. Dazu ist es notwendig, dass der Lenkwinkel der Zugmaschine von einem Regler vorgegeben wird, der neben der vom Fahrer gewuenschten Kruemmung auch die Knickwinkel des Zuges mit einrechnet. Der Fahrer greift damit nicht mehr auf den Lenkwinkel zu, sondern gibt dem Regler einen Sollwert fuer die gewuenschte stabiliserte Bahnkruemmung des Zuges vor. Jeder, der schon einmal selber mit einem Anhaenger rueckwaerts rangiert hat oder zumindest ein solches Manoever beobachtet hat, weiss unmittelbar wieviel

Chemical composition and optical properties of aerosols in the lower mixed layer and the free troposphere. Final report of the AFS project; Chemische Zusammensetzung und optische Eigenschaften des Aerosols in der freien Troposphaere. Abschlussbericht zum AFS-Projekt

Energy Technology Data Exchange (ETDEWEB)

Asseng, H. [Freie Univ. Berlin (Germany). Inst. fuer Weltraumwissenschaften]|[Max-Planck-Institut fuer Chemie, Mainz (Germany). Abt. Biogeochemie; Fischer, J. [Freie Univ. Berlin (Germany). Inst. fuer Weltraumwissenschaften; Helas, G. [Max-Planck-Institut fuer Chemie, Mainz (Germany). Abt. Biogeochemie; Weller, M. [Deutscher Wetterdienst, Potsdam (Germany). Meteorologisches Observatorium

2001-08-02

Aerosol radiative forcing is the largest unknown in current climate models and, as a result, in predicting future climate. Accurate vertically-resolved measurements of aerosol optical properties are an important element of improved climate prediction (IPCC). The present project has contributed to this objective. Jets of directly and remotely determined radiation data have been provided suitable to cut down the uncertainty of column- or layer related optical aerosol parameters. In the present case mean values and profiles of spectral scattering - and absorption coefficients have been retrieved from ground based and airborne sky-radiance/solar irradiance measurements. Available analyses of size and chemical composition of sampled particles (adjoined projects) have been also taken into consideration. The retrieved parameters have served as an input for modelling the radiative transfer exactly for the real time of measurements. Closure procedures yielded finally realistic spectral scattering - and absorption coefficients typically for the lower troposphere in a mostly rural Central European region. (orig.) [German] Die ungenuegende Kenntnis strahlungswirksamer, optischer Aerosolparameter ist laut IPCC die groesste Unbekannte bei der Modellierung des Klimas und seiner Veraenderung. Wissenschaft und Technik bemuehen sich in sog. Schliessungsexperimenten aus der Ueberbestimmung direkt und indirekt gemessener Aerosolparameter genaue(re) Kenntnis (Mittelwert/Variation) ueber deren Klimawirksamkeit zu erlangen. Im vorliegenden Projekt wurden aus verschiedenen passiven, spektralen Messungen von Streulicht und Transmission der Atmosphaere in verschiedenen Hoehen sowie aus der Beruecksichtigung von Partikelanalysen Dritter, Streu- und Absorptionskoeffizienten des Aerosols der gesamten Luftsaeule und in vertikaler Aufloesung abgeleitet. Strahlungstransportmodellierungen mit den gewonnenen Aerosolparametern als input engten ueber den Vergleich mit den Messungen deren Grad an

Das IHS und die Rolle der Forschungsinstitute

OpenAIRE

Keuschnigg, Christian

2014-01-01

Das Institut für Höhere Studien und wissenschaftliche Forschung (IHS) ist ein unabhängiges Forschungsinstitut und leistet Forschung und Ausbildung auf Spitzenniveau für Politik, Wirtschaft und Gesellschaft. Im Wettbewerb zwischen Universitäten und angewandten Forschungsinstituten ist das IHS einzigartig, weil es unter einem Dach Grundlagenforschung und forschungsnahe Lehre mit angewandter Forschung für die wissenschaftliche Politikberatung verbindet. Mit den drei Disziplinen Ökonomie, Soziolo...

Dynamic mechanical and dielectric behavior of banana–glass hybrid fiber reinforced polyester composites.

CSIR Research Space (South Africa)

Pothan, LA

2009-01-01

Full Text Available Hybrid composites of glass and banana fiber (obtained from the pseudo stem of Musa sapientum) in polyester matrix, are subjected to dynamic mechanical analysis over a range of temperature and three different frequencies. The effect of temperature...

Fe{sub 2}O{sub 3}-Poly-pyrrole hybrid nano-composite materials for super-capacitors

Energy Technology Data Exchange (ETDEWEB)

Mallouki, M.; Tran-Van, F.; Sarrazin, C.; Chevrot, C. [Cergy-Pontoise Univ., Lab. de Physicochimie des Polymeres et des Interfaces (LPPI), EA 2528 95 (France); Fauvarque, J.F. [CNAM, Lab. d' Electrochimie Industrielle, 75 - Paris (France); Simon, P. [Universite Paul Sabatier, CIRIMAT-LCMIE, UMR 5085, 31 - Toulouse (France); De, A. [Saha Institute of Nuclear Physics, Calcutta (India)

2004-07-01

Fe{sub 2}O{sub 3}-Poly-pyrrole hybrid nano-composite materials chemically synthesized from colloid particles of iron oxide in aqueous solution have been processed to realize electrode materials for super-capacitor applications. The performances have been evaluated by cyclic voltammetry and galvano-static techniques in a three-electrode cell. The capacitance of Fe{sub 2}O{sub 3}-PPy hybrid nano-composite doped with para-toluene-sulfonate reaches 47 mAh/g in PC/NEt{sub 4}BF{sub 4} with a good stability during cycling (loss of 3% after 1000 cycles). Transmission Electronic Microscopy indicates a porous nano-structure with spherical particles in a range of 400-500 nm which ensures a good accessibility of the electrolyte in the bulk of the electro-active hybrid material. Preliminary studies with room temperature ionic liquid show promising results since the specific capacitance reaches 427 F/g in 1- ethyl-3-methyl-imidazolium bis((tri-fluoro-methyl)sulfonyl)amide (EMITFSI). (authors)

Optimisation of hybrid high-modulus/high-strength carbon fiber reinforced plastic composite drive

OpenAIRE

Montagnier, Olivier; Hochard, Christian

2011-01-01

International audience; This study deals with the optimisation of hybrid composite drive shafts operating at subcritical or supercritical speeds, using a genetic algorithm. A formulation for the flexural vibrations of a composite drive shaft mounted on viscoelastic supports including shear effects is developed. In particular, an analytic stability criterion is developed to ensure the integrity of the system in the supercritical regime. Then it is shown that the torsional strength can be compu...

Solidarität und Heterogenität in Gruppen: Theoretische und empirische Skizzen

Directory of Open Access Journals (Sweden)

Irma Rybnikova

2015-03-01

Full Text Available Für gewöhnlich wird Heterogenität der Gruppen als Hindernis für Solidarität ihrer Mitglieder angesehen: Je verschiedener die Mitglieder, umso schwieriger kommt Solidarität zustande. In der vorliegenden Studie hinterfrage ich diese Generalisierung, indem ich eine Reihe von theoretischen Ansätzen aus der Soziologie und der Gruppenpsychologie konsultiere. Während einige dieser Ansätze nahelegen, dass Heterogenität der Mitglieder die Solidarität der Gruppen untergräbt, bestreiten dies andere Ansätze und gehen davon aus, dass auch heterogene Gruppen solidarisch sein können, vor allem dann, wenn unter den Mitgliedern eine Interdependenz vorliegt. Diese widersprüchlichen theoretischen Annahmen animierten mich zu einer empirischen Untersuchung von Studierendengruppen in einer Lehrveranstaltung. Die Ergebnisse zeigen zwar, dass zwischen Heterogenität und Solidarität in den interdependenten Gruppen ein Zusammenhang anzunehmen ist, dass jedoch auch eine Ambivalenz besteht zwischen individueller und Kollegensolidarität. Vor dem Hintergrund der theoretischen und empirischen Erkenntnisse diskutiere ich Schlussfolgerungen für die Forschung und für die praktischen Bemühungen der Solidarisierung im Bereich der gewerkschaftlichen Organisierung.

Test Beam Results of Geometry Optimized Hybrid Pixel Detectors

CERN Document Server

Becks, K H; Grah, C; Mättig, P; Rohe, T

2006-01-01

The Multi-Chip-Module-Deposited (MCM-D) technique has been used to build hybrid pixel detector assemblies. This paper summarises the results of an analysis of data obtained in a test beam campaign at CERN. Here, single chip hybrids made of ATLAS pixel prototype read-out electronics and special sensor tiles were used. They were prepared by the Fraunhofer Institut fuer Zuverlaessigkeit und Mikrointegration, IZM, Berlin, Germany. The sensors feature an optimized sensor geometry called equal sized bricked. This design enhances the spatial resolution for double hits in the long direction of the sensor cells.

Gel spinning of PVA composite fibers with high content of multi-walled carbon nanotubes and graphene oxide hybrids

International Nuclear Information System (INIS)

Wei, Yizhe; Lai, Dengpan; Zou, Liming; Ling, Xinlong; Lu, Hongwei; Xu, Yongjing

2015-01-01

In this report, poly (vinyl alcohol) (PVA) composite fibers with high content of multi-walled carbon nanotubes and graphene oxide (MWCNTs-GO) hybrids were prepared by gel spinning, and were characterized by TGA, DSC, SEM, XL-2 yarn strength tester and electrical conductivity measurement. The total content of MWCNTs-GO hybrids in the PVA composite fibers, which is up to 25 wt%, was confirmed by TGA analysis. The DSC measurement shows that the melting and crystallization peaks decreased after the addition of nano-fillers. This is due to the reason that the motion of PVA chains is completely confined by strong hydrogen bonding interaction between PVA and nano-fillers. After the addtion of GO, the dispersibility of MWCNTs in composite fibers improved slightly. And the tensile strength and Young's modulus increased by 38% and 67%, respectively. This is caused by the increased hydrogen bonding interaction and synergistic effect through hybridization of MWCNTs and GO. More significantly, the electrical conductivity of PVA/MWCNTs/GO composite fibers enhanced by three orders of magnitude with the addition of GO. (paper)

Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites

Energy Technology Data Exchange (ETDEWEB)

N, Karunagaran [S.K.P Engineering College, Tiruvannamalai (India); A, Rajadurai [Anna University, Chennai (India)

2016-06-15

This paper investigates the effect of surface treatment for glass fiber, stainless steel wire mesh on tensile, flexural, inter-laminar shear and impact properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites. The glass fiber fabric is surface treated either by 1 N solution of sulfuric acid or 1 N solution of sodium hydroxide. The stainless steel wire mesh is also surface treated by either electro dissolution or sand blasting. The hybrid composites are fabricated using epoxy resin reinforced with glass fiber and fine stainless steel wire mesh by hand lay-up technique at room temperature. The hybrid composite consisting of acid treated glass fiber and sand blasted stainless steel wire mesh exhibits a good combination of tensile, flexural, inter-laminar shear and impact behavior in comparison with the composites made without any surface treatment. The fine morphological modifications made on the surface of the glass fiber and stainless steel wire mesh enhances the bonding between the resin and reinforcement which inturn improved the tensile, flexural, inter-laminar shear and impact properties.

Gedenken, Geschichte und Versöhnung in Südafrika und Zimbabwe

OpenAIRE

Marx, Christoph

2006-01-01

'Die Gesellschaft Südafrikas hat sich nach der Überwindung der Apartheid mit der Einrichtung einer Wahrheits- und Versöhnungskommission auf eine wichtige öffentliche Debatte über ihre Vergangenheit eingelassen. Der Kontext dieser Debatte und die Vorgabe, dass die Beschäftigung mit der Vergangenheit in die Bildung einer neuen Nation münden solle, führten indes dazu, dass sich neue Formen von Inklusion und Exklusion entwickelten. Da Identität nur über die Betonung von Differenz möglich ist, läs...

Hinkelbeinchen und "little chicken's leg": deutsche und amerikanische Idiome als kommunikative Textsorten-Problematik

Directory of Open Access Journals (Sweden)

Martin Wierschin

1998-12-01

Full Text Available Als Marin Luther 1522 seine Übersetzung des Neuen Testaments nach der griechischen Edition des Erasmus von Rotterdam abschloß, hatte er dabei zwar mit größtem Sprachgefühl nicht nur dem deutschen, sondem auch dem idiomatischen 'logos' des Griechischen "auf das Maul" gesehen. Aber er mußte in seinem "Sendbrief vom Dolmetschen" 1530 dennoch zugeben, daß selbst er - zusammen mit seinen beiden Assistenten Melanchthon und Aurogallus - sehr oft zwei bis vier Wochen lang nach einem einzigen idiomatisch treffenden Wort zu suchen hatte. Damit wird von einem eminenten Kronzeugen, nämlich vom Schöpfer des protestantischen 'Hausbuches' Lutherbibel und vom eigentlichen Begründer einer einheitlichen deutschen Schrift­ sprache, samt ihrer sprach- und literargeschichtlich wirkungsmächtigen Idiomatik, die Schwierigkeit und Problematik idiomatischer Äquivalenzen und Transferenzen zwischen den Einzelsprachen verbürgt.

Medienbildung und Schulkultur. Implikationen der Verbindung von Medienbildung und Schulkultur für die Medienpädagogik

Directory of Open Access Journals (Sweden)

Nina Grünberger

2017-08-01

Full Text Available Gegenwärtig werden häufig Fragen nach der Konstituierung der Medienpädagogik als Disziplin gestellt und Antwortversuche aus je unterschiedlicher Perspektive formuliert. Der vorliegende Beitrag unternimmt einen solchen Versuch durch die Diskussion von Implikationen weitreichender Medialisierungsprozesse für die «Disziplinierung» der Medienpädagogik und ihrer Forschungsfelder am Beispiel von Schule als genuin pädagogischem Ort. Die Zusammenführung einer poststrukturalistisch gedachten Medienbildung und einer damit einhergehenden Entdichotomisierung von Subjekt und Welt respektive Subjekt und Medien mit dem Konzept der Schulkultur und einem damit verbundenen holistischen Blick auf das Schulgefüge eröffnet eine neue, produktive und gleichsam kritische Perspektive, ohne dabei jeweils auf eine vereinfachte Gesellschaftskritik zurück zu fallen. Dies stellt bisherige medienpädagogische Theoreme und insbesondere das Medienkompetenzkonzept, das über den medienpädagogischen Wirkungskreis hinaus auch in anderen Kontexten etabliert ist, in Frage. So wird eine neue Perspektive auf Medienpädagogik und ihre Ziele eröffnet, die nicht vorschnell in Abgrenzungsmechanismen unterschiedlicher medienpädagogischer Schulen verfällt, sondern zu aller erst eine «offene» sein will.

Mechanical properties of hybrid composites prepared by ice-templating of alumina

Czech Academy of Sciences Publication Activity Database

Roleček, J.; Salamon, D.; Chlup, Zdeněk

2017-01-01

Roč. 37, č. 14 (2017), s. 4279-4286 ISSN 0955-2219 R&D Projects: GA MŠk(CZ) LQ1601 Institutional support: RVO:68081723 Keywords : fracture-toughness * ceramic s * matrix * laminate * behavior * fibers * Ice-templating * Alumina * Epoxide * Hybrid composites * Strength Subject RIV: JH - Ceramic s, Fire-Resistant Materials and Glass OBOR OECD: Ceramic s Impact factor: 3.411, year: 2016

Fetal magnetic resonance imaging of thoracic and abdominal malformations; Fetale Magnetresonanztomographie thorakaler und abdomineller Malformationen

Energy Technology Data Exchange (ETDEWEB)

Woitek, R.; Asenbaum, U.; Furtner, J.; Prayer, D. [Medizinische Universitaet Wien, Abteilung fuer Neuroradiologie und Muskuloskelettale Radiologie, Universitaetsklinik fuer Radiodiagnostik, Wien (Austria); Brugger, P.C. [Medizinische Universitaet Wien, Zentrum fuer Anatomie und Zellbiologie, Wien (Austria)

2013-02-15

Diagnosis and differential diagnosis of fetal thoracic and abdominal malformations. Ultrasound and magnetic resonance imaging (MRI). In cases of suspected pathologies based on fetal ultrasound MRI can be used for more detailed examinations and can be of assistance in the differential diagnostic process. Improved imaging of anatomical structures and of the composition of different tissues by the use of different MRI sequences. Fetal MRI has become a part of clinical routine in thoracic and abdominal malformations and is the basis for scientific research in this field. In cases of thoracic or abdominal malformations fetal MRI provides important information additional to ultrasound to improve diagnostic accuracy, prognostic evaluation and surgical planning. (orig.) [German] Diagnose und Differenzialdiagnose fetaler thorakaler und abdomineller Malformationen. Ultraschall, MRT. MRT zur weiteren Abklaerung und genaueren Differenzierung bei vielen im Ultraschall gestellten Verdachtsdiagnosen. Verbesserte anatomische Darstellung mittels MRT und Darstellung unterschiedlicher Gewebezusammensetzung mittels verschiedener MR-Sequenzen. Die fetale MRT ist bei der angegebenen Fragestellung in die klinische Routine eingegangen und liefert weiterhin die Basis fuer wissenschaftliche Untersuchungen in diesem Bereich. Die fetale MRT liefert beim Vorliegen thorakaler oder abdomineller Malformationen komplementaer zum Ultraschall wichtige Zusatzinformationen, um die diagnostische Genauigkeit zu erhoehen, die Prognoseabschaetzung zu verbessern und ggf. eine bessere chirurgische Planung zu ermoeglichen. (orig.)

Hybrid Vehicle Technology Constraints and Application Assessment Study : Volume 3. Sections 5 through 9.

Science.gov (United States)

1977-11-01

This four-volume report presents analyses and assessments of both heat engine/battery- and heat engine/flywheel-powered hybrid vehicles to determine if they could contribute to near-term (1980-1990) reductions in transportation energy consumption und...

Hybrid Vehicle Technology Constraints and Application Assessment Study : Volume 2. Sections 1 through 4.

Science.gov (United States)

1977-01-01

This four-volume report presents analyses and assessments of both heat engine/battery- and heat engine/flywheel-powered hybrid vehicles to determine if they could contribute to near-term (1980-1990) reductions in transportation energy consumption und...

Fotografie und atomare Katastrophe

OpenAIRE

Bürkner, Daniel

2015-01-01

Die Dissertation setzt sich mit den fotografischen Repräsentationen der Atombombenabwürfe auf Hiroshima und Nagasaki sowie der Havarie des Kernkraftwerks Tschernobyl auseinander. Dabei werden künstlerische, dokumentarische und touristische Bilder analysiert, die sich der jeweiligen Strahlenkatastrophe oftmals erst Jahre nach dem Ereignis annehmen und ikonografische oder medial-materielle Bezüge zu ihr aufweisen. Es zeigen sich zentrale Strategien, atomare Katastrophen, seien sie militäri...

Reduction of environmental pollution - Mohndruck Energy Centre with PHC installation and cooperative energy combination. Final report - appendices; Verminderung von Umweltbelastungen - Energiezentrum Mohndruck mit KWK-K-Anlagen und kooperativem Energieverbund. Abschlussbericht mit Anlagen zum Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Lichter, T.

1999-11-30

. Die Abluft wird in TNV-Anlagen gereinigt und die heissen Abgase zur Dampferzeugung eingesetzt. Der erzeugte Prozessdampf wird in die Gasturbinen der GuD-Anlage eingeduest und so zur zusaetzlichen Stromerzeugung genutzt. Im Jahr 1998 konnte durch die umweltentlastende und ressourcenschonende Technologie der KWKK-Anlagen neben einer umfassenden Verminderung der Luftschadstoffe NO{sub x} (um 60%), CO (um 49%), SO{sub x} und Staub (um jeweils 100%) eine Entlastung der Atmosphaere am Treibhausgas CO{sub 2} um ca. 78.000 t erzielt werden. Dieser Wert entspricht einer Minderung des CO{sub 2}-Ausstosses um ca. 52%. (orig.)

The Ethnic Politics of Coup Avoidance: Evidence from Zambia and Uganda Ethnopolitik und die Vermeidung von Militärputschen: Sambia und Uganda im Vergleich

Directory of Open Access Journals (Sweden)

Stefan Lindemann

2011-01-01

Full Text Available Though military interventions seem endemic in sub-Saharan Africa, more than a third of all countries have been able to avoid military coups. To solve this puzzle, this article relates the likelihood of military coups to the degree of ethnic congruence between civilian and military leaders, arguing that coup avoidance is most likely when government and army either exhibit the same ethnic bias or are both ethnically balanced. This argument is illustrated by a comparison of the diverging experiences of Zambia and Uganda. While Zambia is among Africa’s coup-free countries, Uganda’s vulnerability to military intervention has varied over time – with four coups under Obote and the Uganda National Liberation Front (UNLF but no coups under Amin and Museveni. Drawing on original longitudinal data on the ethnic distribution of political and military posts, the article shows that the absence of military coups in Zambia goes back to the balanced composition of government and army. In Uganda, coup avoidance under Amin and Museveni can be linked to the fact that government and army exhibited the same ethnic bias, whereas the coups against the Obote and UNLF regimes reflected either ethnic incongruence between civilian and military leaders or the destabilising combination of a similarly polarised government and army.Politische Interventionen von Militärs scheinen im subsaharischen Afrika allgegenwärtig zu sein. In mehr als einem Drittel der afrikanischen Staaten kam es jedoch bislang nicht zu einem Militärputsch. Der Autor dieses Beitrags vermutet eine Verbindung zwischen dem Grad ethnischer Kongruenz in der zivilen und der militärischen Führung eines Staates und der Wahrscheinlichkeit von Militärinterventionen; er argumentiert, dass ein Putsch immer dann vermieden werden kann, wenn Regierung und militärische Führung entweder von der gleichen ethnischen Gruppe dominiert werden oder wenn beide ethnisch ausgewogen zusammengesetzt sind. Dieser Erkl

Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins.

Science.gov (United States)

Garoushi, Sufyan; Lassila, Lippo; Hatem, Marwa; Shembesh, Muneim; Baady, Lugane; Salim, Ziad; Vallittu, Pekka

2013-01-01

The aim was to evaluate the color stability and water uptake of two hybrid composite resins polymerized in two different conditions after exposure to commonly consumed beverages. In addition, the effect of repolishing and bleaching on the stained composite was evaluated. Eighty specimens (12 mm × 12 mm × 3 mm) were made from two hybrid composite resins of shade A2. Forty specimens of each composite were divided into two groups (n = 20 per each) according to the curing method used (hand light cure HLC or oven light cure OLC). Then each group (HLC or OLC) was sub-divided randomly into four sub-groups (n = 5), which were immersed for 60 days in different beverages (distal water, coffee, tea and pepsi) and incubated at 37°C. Water uptake was measured during this time and followed by measurement of color difference (ΔE) by using a spectrophotometer. After complete staining, repolishing (grit 4000 FEPA at 300 rpm under water) and bleaching (40% hydrogen peroxide bleaching gel) were conducted. The repolished and bleached specimens were submitted to new color measurements. Color value of the specimens immersed in tea displayed the highest statistically significant (p pepsi was significantly lower than the others. After staining of the composite resins, both the bleaching and repolishing were able to reduce the ΔE value. All beverages used affected the color stability of tested composite resins. The effect of beverages on color change of composites depends on type of beverage and water uptake value of resins used. A superior whitening effect was obtained with repolishing technique compared to bleaching.

Mechanical Characterization and Water Absorption Behaviour of Interwoven Kenaf/PET Fibre Reinforced Epoxy Hybrid Composite

Directory of Open Access Journals (Sweden)

Yakubu Dan-mallam

2015-01-01

Full Text Available The development of interwoven fabric for composite production is a novel approach that can be adopted to address the challenges of balanced mechanical properties and water absorption behaviour of polymer composites. In this paper, kenaf and PET (polyethylene terephthalate fibre were selected as reinforcing materials to develop the woven fabric, and low viscosity epoxy resin was chosen as the matrix. Vacuum infusion process was adopted to produce the hybrid composite due to its superior advantages over hand lay-up technique. The weight percentage composition of the Epoxy/kenaf/PET hybrid composite was maintained at 70/15/15 and 60/20/20, respectively. A significant increase in tensile strength and elastic modulus of approximately 73% and 53% was recorded in relation to neat epoxy. Similarly, a substantial increase in flexural, impact, and interlaminar properties was also realized in relation to neat epoxy. This enhancement in mechanical properties may be attributed to the interlocking structure of the interwoven fabric, individual properties of kenaf and PET fibres, strong interfacial bonding, and resistance of the fibres to impact loading. The water absorption of the composites was studied by prolonged exposure in distilled water, and the moisture absorption pattern was found to follow Fickian behaviour.