WorldWideScience

Sample records for black-crowned night-herons nycticorax

  1. Swimming black-crowned night-herons (Nycticorax nycticorax) Kleptoparasitize American coots (Fulica americana)

    DEFF Research Database (Denmark)

    Graves, Gary R.

    2015-01-01

    I observed black-crowned night-herons (Nycticorax nycticorax) swimming and kleptoparasitizing American coots (Fulica americana) at an artificial lake in Pinal County, Arizona. This appears to be the first record of interspecific kleptoparasitism by a swimming ardeid.......I observed black-crowned night-herons (Nycticorax nycticorax) swimming and kleptoparasitizing American coots (Fulica americana) at an artificial lake in Pinal County, Arizona. This appears to be the first record of interspecific kleptoparasitism by a swimming ardeid....

  2. Observations of indirect filial cannibalism in response to nest failure of Black-crowned Night-Herons (Nycticorax nycticorax)

    Science.gov (United States)

    Brussee, Brianne E.; Coates, Peter S.; Dwight, Ian; Young, Laura G.

    2017-01-01

    During 2011, four separate instances of indirect filial cannibalism, whereby adults consumed their young that died from unknown causes, were observed using video-monitoring techniques in a nesting colony of Black-crowned Night-Herons (Nycticorax nycticorax) on Alcatraz Island. Though they were not observed actively killing their young, in all four observations adult Black-crowned Night-Herons consumed their young following death (i.e., indirect filial cannibalism). We could not determine cause of chick mortality, but parental neglect was likely a contributing factor in at least two instances. Indirect filial cannibalism is not commonly documented among birds, and understanding how cannibalism contributes to nest failure can help researchers better understand factors that limit nesting populations.

  3. Responses of nestling black-crowned night herons (Nycticorax nycticorax) to aquatic and terrestrial recreational activities: a manipulative study

    Science.gov (United States)

    Esteban Fernandez-Juricic; Patrick A. Zollner; Cherie LeBlanc Fisher; Lynne M. Westphal

    2007-01-01

    We assessed the effects of the presence and the frequency of canoe and pedestrian disturbance during two breeding seasons on multiple behavioral responses (scanning, freezing, grooming, sleeping, moving, wing-raising, and standing-up) of Black-crowned Night Heron ( Nycticorax nycticorax ) nestlings in a breeding colony in southeast Chicago. Short-...

  4. Lead accumulation in feathers of nestling black-crowned night-herons (Nycticorax nycticorax) experimentally treated in the field

    Science.gov (United States)

    Golden, N.H.; Rattner, B.A.; Cohen, J.B.; Hoffman, D.J.; Russek-Cohen, E.; Ottinger, M.A.

    2003-01-01

    Although lead can attain high concentrations in feathers, interpretation of the biological significance of this phenomenon is difficult. As part of an effort to develop and validate non-invasive methods to monitor contaminant exposure in free-ranging birds, lead uptake by feathers of nestling black-crowned night-herons (Nycticorax nycticorax) was evaluated in a controlled exposure study. Four to six day-old heron nestlings (one/nest) at Chincoteague Bay, Virginia, received a single intraperitoneal injection of dosing vehicle (control; n=7) or a dose of lead nitrate in water (0.01, 0.05, or 0.25 mg Pb/g body weight of nestling; n=6 or 7/dose) chosen to yield feather lead concentrations found at low to moderately polluted sites. Nestlings were euthanized at 15 days of age. Lead accumulation in feathers was associated with concentrations in bone, kidney, and liver (r = 0.32 - 0.74, p feather lead concentration. Culmen growth rate was depressed in nestlings treated with the highest dose of lead, but not correlated with feather lead concentration. These findings provide evidence that feathers of nestling herons are a sensitive indicator of lead exposure and have potential application for the extrapolation of lead concentrations in other tissues and the estimation of environmental lead exposure in birds.

  5. Lead accumulation in feathers of nestling black-crowned night herons (Nycticorax nycticorax) experimentally treated in the field.

    Science.gov (United States)

    Golden, Nancy H; Rattner, Barnett A; Cohen, Jonathan B; Hoffman, David J; Russek-Cohen, Estelle; Ottinger, Mary Ann

    2003-07-01

    Although lead can attain high concentrations in feathers, interpretation of the biological significance of this phenomenon is difficult. As part of an effort to develop and validate noninvasive methods to monitor contaminant exposure in free-ranging birds, lead uptake by feathers of nestling black-crowned night herons (Nycticorax nycticorax) was evaluated in a controlled exposure study. Four- to 6-d-old heron nestlings (one/nest) at Chincoteague Bay, Virginia (USA), received a single intraperitoneal injection of dosing vehicle (control, n = 7) or a dose of lead nitrate in water (0.01, 0.05, or 0.25 mg Pb/g body wt of nestling; n = 6 or 7/dose) chosen to yield feather lead concentrations found at low- to moderately polluted sites. Nestlings were euthanized at 15 d of age. Lead accumulation in feathers was associated with concentrations in bone, kidney, and liver (r = 0.32-0.74, p feather lead concentration. Culmen growth rate was depressed in nestlings treated with the highest dose of lead but not correlated with feather lead concentration. These findings provide evidence that feathers of nestling herons are a sensitive indicator of lead exposure and have potential application for the extrapolation of lead concentrations in other tissues and the estimation of environmental lead exposure in birds.

  6. Element patterns in feathers of nestling Black-Crowned Night-Herons, Nycticorax nycticorax L., from four colonies in Delaware, Maryland, and Minnesota

    Science.gov (United States)

    Custer, Thomas W.; Golden, Nancy H.; Rattner, Barnett A.

    2008-01-01

    The pattern of elements in nestling black-crowned night-heron feathers from a rural Minnesota colony differed from colonies in industrialized regions of Maryland and Delaware. Except for chromium, however, the differences did not reflect the elements associated with waters and sediments of the Maryland and Delaware colonies. Therefore, elements in water and sediment do not necessarily bioaccumulate in night-heron feathers in relation to potential exposure. Although trace element patterns in feathers indicated differences among geographical locations, they did not separate all locations well and their usefulness as an indicator of natal colony location may be limited.

  7. Effects of lead in nestling black-crowned night-herons (Nycticorax nycticorax) experimentally dosed in the field

    Science.gov (United States)

    Golden, N.H.; Rattner, B.A.; Cohen, J.B.; Hoffman, D.J.; Ottinger, M.A.

    2000-01-01

    Lead is a known environmental toxicant, and poisoning resulting from the ingestion of lead shot has been well-documented in many species of waterfowl. However, much less is known regarding exposure and effects of free environmental lead in species of birds other than waterfowl. In an attempt to evaluate toxicity of lead to herons and to determine the usefulness of feathers as a non-invasive exposure-monitoring tool, black-crowned night-heron nestlings were dosed with lead to determine its distribution among tissues, and its effects on biochemical biomarkers, growth, and survival. Five-day-old heron nestlings (one per nest) at Chincoteague Bay, Virginia were given a single intra-peritoneal injection of dosing vehicle (control; N=7) or one of three lead solutions (as lead nitrate) (10, 50, or 250 mg/kg body weight of nestling; N=7 per dose) chosen to represent levels below, at, and above those found in moderately-polluted environments. All nestlings treated with lead exhibited dose-dependent inhibition of delta-aminolevulinic acid dehydratase (ALAD) activity compared to controls, and nestlings treated with the highest concentration showed a reduced carcass weight compared to controls. Of several measures of oxidative stress that were analyzed, significant differences were found between low- and high-dosed nestlings in hepatic total thiol and protein-bound sulfhydryl concentrations. No differences in survival were detected between dosed nestlings, controls, or uninjected siblings. Lead concentrations in several matrices, including feathers, are being determined to assess distribution among tissues and will also be examined for relationships with measures of effect.

  8. Relation among cytochrome P450, AH-active PCB congeners and dioxin equivalents in pipping black-crowned night-heron embryos

    Science.gov (United States)

    Rattner, B.A.; Hatfield, J.S.; Melancon, M.J.; Custer, T.W.; Tillitt, D.E.

    1994-01-01

    Pipping black-crowned night-heron (Nycticorax nycticorax) embryos were collected from a relatively uncontaminated site (next to Chincoteague National Wildlife Refuge, VA) and three polluted sites (Cat Island, Green Bay, Lake Michigan, WI; Bair Island, San Francisco Bay, CA; West Marin Island, San Francisco Bay, CA). Hepatic cytochrome P-450-associated monooxygenases and cytochrome P-450 proteins, induced up to 85-fold relative to the reference site, were associated with concentrations of total polychlorinated biphenyls (PCBs) and 11 PCB congeners that are presumed to express toxicity through the arylhydrocarbon (Ah) receptor. Multiple regression revealed that up to 86% of the variation of cytochrome P450 measurements was accounted for by variation in the concentration of these PCB congeners. Toxic equivalents (TEQs) of sample extracts, predicted mathematically (summed product of PCB congener concentrations and toxic equivalency factors), and dioxin equivalents (TCDD-EQs), derived by bioassay (ethoxyresorufin-O-dealkylase activity of treated H4IIE rat hepatoma cells), were greatest in Cat Island samples. Cytochrome P450-associated monooxygenases and cytochrome P450 proteins were related to TEQs and TCDD-EQs; adjusted r-2 often exceeded 0.5 for the relation among mathematically predicted TEQs and cytochrome P450 measurements. These data extend previous observations in heron embryos of an association between P450 and total PCB burdens to include Ah-active PCB congeners, and presumably other compounds, which interact similarly with the Ah receptor. Benzyloxyresorufin O-dealkylase, ethoxyresorufin O-dealkylase, and cytochrome P450 1A appear to be the most reliable measures of exposure to Ah-active PCB congeners in black-crowned night-heron embryos. These findings provide further evidence that cytochrome P450-associated parameters have considerable value as a biomarker for assessing environmental contamination of wetlands.

  9. Absorption and biotransformation of polybrominated diphenyl ethers DE-71 and DE-79 in chicken (Gallus gallus), mallard (Anas platyrhynchos), American kestrel (Falco sparverius) and black-crowned night-heron (Nycticorax nycticorax) eggs

    Science.gov (United States)

    McKernan, Moira A.; Rattner, Barnett A.; Hatfield, Jeff S.; Hale, Robert C.; Ottinger, Mary Ann

    2010-01-01

    We recently reported that air cell administration of penta-brominated diphenyl ether (penta-BDE; DE-71) evokes biochemical and immunologic effects in chicken (Gallus gallus) embryos at very low doses, and impairs pipping (i.e., stage immediately prior to hatching) and hatching success at 1.8 ug g-1 egg (actual dose absorbed) in American kestrels (Falco sparverius). I n the present study, absorption of polybrominated diphenyl ether (PBDE) congeners was measured following air cell administration of a penta-BDE mixture (11.1 ug DE-71 g-1 egg) or an octa-brominated diphenyl ether mixture (octa-BDE; DE-79; 15.4 ug DE-79 g-1 egg). Uptake of PBDE congeners was measured at 24 h post-injection, midway through incubation, and at pipping in chicken, mallard (Anas platyrhynchos), and American kestrel egg contents, and at the end of incubation in black-crowned night-heron (Nycticorax nycticorax) egg contents. Absorption of penta-BDE and octa-BDE from the air cell into egg contents occurred throughout incubation; at pipping, up to 29.6% of penta-BDE was absorbed, but only 1.40-6.48% of octa-BDE was absorbed. Higher brominated congeners appeared to be absorbed more slowly than lower brominated congeners, and uptake rate was inversely proportional to the log Kow of predominant BDE congeners. Six congeners or co-eluting pairs of congeners were detected in penta-BDE-treated eggs that were not found in the dosing solution suggesting debromination in the developing embryo, extraembryonic membranes, and possibly even in the air cell membrane. This study demonstrates the importance of determining the fraction of xenobiotic absorbed into the egg following air cell administration for estimation of the lowest-observed-effect level.

  10. Mercury and drought along the lower Carson River, Nevada: II. Snowy egret and black-crowned night-heron reproduction on Lahontan Reservoir, 1997-2006

    Science.gov (United States)

    Hill, Elwood F.; Henry, Charles J.; Grove, Robert A.

    2008-01-01

    Mercury concentrations in the floodplain of the Carson River Basin in northwestern Nevada are some of the highest ever reported in a natural system. Thus, a portion of the basin including Lahontan Reservoir was placed on the U.S. Environmental Protection Agency’s Natural Priorities List for research and cleanup. Preliminary studies indicated that reproduction in piscivorous birds may be at risk. Therefore, a 10-year study (1997–2006) was conducted to evaluate reproduction of snowy egrets (Egretta thula) and black-crowned night-herons (Nycticorax nycticorax) nesting on Gull Island in Lahontan Reservoir. Special attention was given to the annual flow of the Carson River, the resultant fluctuation of this irrigation reservoir, and the annual exposure of snowy egrets and night-herons to methylmercury (MeHg). The dynamic character of the river due to flooding and drought (drought effect) influenced snowy egret and night-heron reproduction more so than did MeHg contamination of eggs. During an extended drought (2000–2004) in the middle of the study, snowy egret nests containing eggs with concentrations of MeHg (measured as total mercury [THg] ∼ 100% MeHg) ≥0.80 μg THg/g, ww, all failed, but in 1997 and 2006 (wet years with general flooding), substantial numbers of young were produced (but fewer than at nests where eggs contained reproductive threshold of tolerance to MeHg may be associated with habitat quality (food type and abundance). Clearly, drought was the most important factor affecting snowy egret annual productivity. In contrast to snowy egrets, night-herons generally had fewer nests meeting the 0.80 μg THg/g criterion, and those above the criterion were less sensitive to mercury than were snowy egrets. Furthermore, night-herons appeared more tolerant of drought conditions than snowy egrets because they nested earlier, selected more protected nesting sites, and had a more generalist diet that provided additional food options including terrestrial

  11. Mercury and drought along the Lower Carson River, Nevada: III. effects on blood and organ biochemistry and histopathology of snowy egrets and black-crowned night-herons on Lahontan Reservoir, 2002-2006

    Science.gov (United States)

    Hoffman, David J.; Henny, Charles J.; Hill, Elwood F.; Grove, Robert A.; Kaiser, James L.; Stebbins, Katherine R.

    2009-01-01

    A 10-year study (1997-2006) was conducted to evaluate reproduction and health of aquatic birds in the Carson River Basin of northwestern Nevada (on the U.S. Environmental Protection Agency Natural Priorities List) due to high mercury (Hg) concentrations from past mining activities. This part of the study evaluated physiological associations with blood Hg in young snowy egrets (Egretta thula) and black-crowned night-herons (Nycticorax nycticorax), and organ biochemistry and histopathological effects in snowy egrets on Lahontan Reservoir (LR) from the period 2002-2006. LR snowy egret geometric mean total Hg concentrations (μg/g ww) ranged from 1.5 to 4.8 for blood, 2.4 to 3.1 liver, 1.8 to 2.5 kidneys, 1.7 to 2.4 brain, and 20.5 to 36.4 feathers over these years. For night-herons, mean Hg for blood ranged from 1.6 to 7.4. Significant positive correlations were found between total Hg in blood and five plasma enzyme activities of snowy egrets suggesting hepatic stress. Histopathological findings revealed vacuolar changes in hepatocytes in LR snowy egrets as well as correlation of increased liver inflammation with increasing blood and tissue Hg. Hepatic oxidative effects were manifested by decreased hepatic total thiol concentration and glutathione reductase activity and elevated hepatic thiobarbituric acid-reactive substances (TBARS), a measure of lipid peroxidation. However, other hepatic changes indicated compensatory mechanisms in response to oxidative stress, including decreased oxidized glutathione (GSSG) concentration and decreased ratio of GSSG to reduced glutathione. In young black-crowned night-herons, fewer correlations were apparent. In both species, positive correlations between blood total Hg and plasma uric acid and inorganic phosphorus were suggestive of renal stress, which was supported by histopathological findings. Both oxidative effects and adaptive responses to oxidative stress were apparent in kidneys and brain. Vacuolar change and inflammation in

  12. Heavy metal and selenium levels in feathers of young egrets and herons from Hong Kong and Szechuan, China.

    Science.gov (United States)

    Burger, J; Gochfeld, M

    1993-09-01

    Several species of herons and egrets frequently nest in colonies in areas where humans also concentrate. Since the birds feed on intermediate-sized fish that themselves concentrate pollutants, they can be used not only to assess the levels of contaminants in avian tissues but as indicators of contaminants in the environment. The concentration of heavy metals and selenium in the breast feathers of fledgling black-crowned night herons Nycticorax nycticorax and Chinese pond herons Ardeola bacchus from the Tu Jing Yan heronry outside Chengdu, Szechuan Province in China; and from fledgling black-crowned night heron, little egret Egretta garzetta, great egret Egretta alba and cattle egret Bubulcus ibis from the Mai Po heronry in Hong Kong, were determined. Breast feathers were also collected from adult great egrets in Hong Kong. Adult great egrets had significantly higher levels of all heavy metals than did young great egrets. There were no significant interspecific differences in metal levels among the young at Szechuan China, except for chromium (pond herons had higher levels). There were significant differences among the young nesting at Hong Kong for all metals examined. Great egrets had lower, and night herons had higher, levels of lead than the other young. Night herons also had the highest levels of cadmium, manganese, and selenium compared to the other young. Great egret chicks had the lowest mercury levels, while little egret had the highest levels. Lead levels for all the birds in both Hong Kong and Szechuan were among the highest in the world, and this was attributed to the continued use of leaded gasoline.

  13. Combined impacts of Black-crowned Night-Heron predation/disturbance and various management activities on Roseate Tern productivity in 2003, and testing of a video surveillance system for recording the diurnal and nocturnal behavior of terns and night-herons at Falkner Island, Stewart B. McKinney National Wildlife Refuge, Connecticut, in 2004: Report to U.S. Fish and Wildlife Service, Stewart B. McKinney National Wildlife Refuge, Westbrook, Connecticut and U.S. Fish and Wildlife Service, Region 5 Regional Office, Hadley, Massachusetts

    Science.gov (United States)

    Spendelow, J.A.; Kuter, M.

    2004-01-01

    Falkner Island (FICT), a unit of the U.S. Fish and Wildlife Service's Stewart B. McKinney National Wildlife Refuge (SBMNWR) since 1985, is located in Long Island Sound 5 km south of Guilford, CT. For more than three decades it has been the site of the only large breeding colony in Connecticut of the federally endangered Northwest Atlantic population of Roseate Terns (Sterna dougallii) and the state's largest colony of Common Terns (S. hirundo). Both species have been studied at this site since 1978 as part of the Falkner Island Tern Project (FITP), and since 1987 also as part of a regional Cooperative Roseate Tern Metapopulation Dynamics and Ecology Project (CRTMP), both coordinated by Dr. Jeffrey A. Spendelow of the U.S. Geological Survey's Patuxent Wildlife Research Center (USGS-PWRC). From 1997-2002 the Roseate Tern breeding population at this site declined by more than 50% from about 150 to about 70 nesting pairs, mostly as a result of the nocturnal predation and disturbance of tern chicks and eggs by Black-crowned Night-Herons (Nycticorax nycticorax). Here we report the results of research done with the goal of improving management of nocturnal predators and developing new practices/structures to reduce losses of tern eggs and chicks so as to prevent the abandonment of this site by Roseate Terns. Notification of release of the USGS 'Quick Response Funds' (QRF) that were to be used to support the part of this study entitled 'Nocturnal behavior/interactions of endangered Roseate Terns and Black-crowned Night-Herons', and final approval of the Study Plan for this research did not occur until after the breeding season in 2003 was well underway. As a result, some work will need to be completed during the 2004 field season. There are two major objectives of this study. The first is to collect basic information (a) on the nocturnal behavior and interactions of Roseate (and Common) Terns with predatory Black-crowned Night-Herons, and (b) on how the behavior of the

  14. Selenium and metal concentrations in waterbird eggs and chicks at Agassiz National Wildlife Refuge, Minnesota

    Science.gov (United States)

    Custer, T.W.; Custer, Christine M.; Eichhorst, B.A.; Warburton, D.

    2007-01-01

    Exceptionally high cadmium (Cd) and chromium (Cr) concentrations were reported in eggs, feathers, or livers of selected waterbird species nesting at Agassiz National Wildlife Refuge (Agassiz) in 1994. Ten- to 15-day-old Franklin's gull (Larus pipixcan), black-crowned night-heron (Nycticorax nycticorax), and eared grebe (Podiceps nigricollis) chicks were collected in 1998, 1999, and 2001 at Agassiz and analyzed for selenium (Se) and metals including Cd and Cr. Freshly laid eggs were collected in 2001 from Franklin's gull, black-crowned night-heron, eared grebe, and pied-billed grebe (Podilymbus podiceps) nests at Agassiz. Based on a multivariate analysis, the pattern of Se and metal concentrations differed among species for eggs, chick feathers, and chick livers. Low Cd and Cr concentrations were measured in eggs, chick livers, and chick feathers of all four species. Mercury concentrations in black-crowned night-heron and eared grebe eggs collected from Agassiz in 2001 were lower than concentrations reported in 1994. Se and metal concentrations, including Cd and Cr, in waterbird eggs and chicks collected at Agassiz in 1998, 1999, and 2001 were not at toxic levels. ?? 2007 Springer Science+Business Media, LLC.

  15. Relationships among cytochromes P450 and dioxin equivalents in pipping heron embryos from Virginia, the Great Lakes and San Francisco Bay

    Science.gov (United States)

    Rattner, B.A.; Hatfield, J.S.; Melancon, M.J.; Custer, T.W.; Tillett, D.E.

    1993-01-01

    Pipping black-crowned night-heron (Nycticorax nycticorax) embryos were collected from undisturbed (Chincoteague National Wildlife Refuge, VA) and industrialized (Cat Island, Green Bay, WI; San Francisco Bay, CA) locations. Hepatic P450 associated monooxygenases (AHH, EROD, BROD, ECOD) and P450 proteins (CYP1A, CYP2B) were induced up to 85-fold, and were associated with burdens of total PCBs and 11 AHH-active PCB congeners. Dioxin equivalents (TCDD-EQs) of sample extracts, derived by bioassay (H4I1E rat hepatoma cell) and mathematically (product of PCB congener concentration and relative TCDD potency), revealed greatest TCDD-EQs in Cat Island samples. TCDD-EQs were associated with P450s, especially BROD, EROD and CYP1A (r2 = 0.35 to 0.66). TCDD-EQs derived by bioassay were highly correlated with TCDD-EQs derived mathematically (r2 = 0.58 to 0.67) . Multiple regressions were also performed to investigate relationships among P450s and PCB congeners. In summary, these data demonstrate that hepatic P450s of heron embryos are biomarkers of exposure to dioxin-like compounds and provide further evidence that this species has considerable value for assessing wetland and estuarine contamination.

  16. Reprodução de Nycticorax nycticorax (Linnaeus no litoral de Santa Catarina, Brasil Reproduction of the Nycticorax nycticorax (Linnaeus in the Santa Catarina's coast, Brazil

    Directory of Open Access Journals (Sweden)

    Joaquim O. Branco

    2005-06-01

    Full Text Available O savacu Nycticorax nycticorax (Linnaeus, 1758 é uma espécie de hábitos crepusculares e noturnos, com ampla distribuição geográfica. Sua biologia reprodutiva tem sido intensivamente estudada nos países de ocorrência, entretanto, no Brasil, é comumente citada nos levantamentos de ornitólogos, mas não existem informações disponíveis sobre seu ciclo de vida. Esse trabalho objetiva contribuir para o conhecimento da biologia reprodutiva dessa espécie no litoral catarinense. As amostragens foram realizadas nos anos de 2000 a 2002 na Ilha dos Pássaros e de 2002 na Ilha dos Lobos, Santa Catarina. As maiores abundâncias de exemplares e ninhos com ovos ocorreram em outubro, sendo que o comprimento médio dos ovos variou entre 5,02 ± 0,23 a 5,07 ± 0,21 cm e o volume 31,71 ± 2,64 a 35,92 ± 3,47 cm³ e as maiores freqüências de filhotes em novembro, culminando o abandono da colônia em meados de janeiro. Foram identificados sete itens nos regurgitos dos filhotes, sendo que os peixes marinhos representaram 44,4% da massa total. O principal predador na colônia foi o urubu-comum, que atuou sobre os ovos no início da temporada e os filhotes no final.The black-crowned night heron N. nycticorax (Linnaeus, 1758 is a aquatic bird with twilight and night habits, with wide geographical distribution. His reproductive biology has been studied intensively at the occurrence countries, however, in Brazil, it is mentioned commonly in the ornithologists' risings, but available information don't exist on his life cycle. This work aims to contribute for the knowledge of the reproductive biology of that species in the Santa Catarina coast. The samplings were accomplished in the years from 2000 to 2002 in the Ilha dos Pássaros and of 2002 in the Ilha dos Lobos, Santa Catarina. The largest abundances of individuals and nests with eggs happened in October, and the medium length of the eggs varied between 5.02 ± 0.23 to 5.07 ± 0.21 cm and the volume 31

  17. Contaminant exposure of birds nesting in Green Bay, Wisconsin, USA.

    Science.gov (United States)

    Custer, Thomas W; Dummer, Paul M; Custer, Christine M; Franson, J Christian; Jones, Michael

    2014-08-01

    In earlier studies, elevated concentrations of polychlorinated biphenyl (PCB) and p,p'-dichlorodiphenyldichloroethylene (DDE) were reported in double-crested cormorant (Phalacrocorax auritus) eggs and tree swallow (Tachycineta bicolor) eggs and nestlings collected from lower Green Bay (WI, USA) in 1994 and 1995 and black-crowned night-heron (Nycticorax nycticorax) eggs collected in 1991. Comparable samples collected in 2010 and 2011 indicated that concentrations of PCBs were 35%, 62%, 70%, and 88% lower than in the early 1990s in tree swallow eggs, tree swallow nestlings, double-crested cormorant eggs, and black-crowned night-heron eggs, respectively; concentrations of DDE were 47%, 43%, 51%, and 80% lower, respectively. These declines are consistent with regional contaminant trends in other species. Concentrations of PCBs were higher in herring gull (Larus argentatus) than in black-crowned night-heron eggs collected from Green Bay in 2010; PCB concentrations in double-crested cormorant and tree swallow eggs were intermediate. The estimated toxicity of the PCB mixture in eggs of the insectivorous tree swallow was the equal to or greater than toxicity in the 3 piscivorous bird species. A multivariate analysis indicated that the composition percentage of lower-numbered PCB congeners was greater in eggs of the insectivorous tree swallow than in eggs of the 3 piscivorous species nesting in Green Bay. Dioxin and furan concentrations and the toxicity of these chemicals were also higher in tree swallows than these other waterbird species nesting in Green Bay. Published 2014 Wiley Periodicals, Inc.

  18. Human exposure to PCDDs and their precursors from heron and tern eggs in the Yangtze River Delta indicate PCP origin.

    Science.gov (United States)

    Zhou, Yihui; Yin, Ge; Asplund, Lillemor; Stewart, Kathryn; Rantakokko, Panu; Bignert, Anders; Ruokojärvi, Päivi; Kiviranta, Hannu; Qiu, Yanling; Ma, Zhijun; Bergman, Åke

    2017-06-01

    Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are highly toxic to humans and wildlife. In the present study, PCDD/Fs were analyzed in the eggs of whiskered terns (Chlidonias hybrida), and genetically identified eggs from black-crowned night herons (Nycticorax nycticorax) sampled from two lakes in the Yangtze River Delta area, China. The median toxic equivalent (TEQ) of PCDD/Fs were 280 (range: 95-1500) and 400 (range: 220-1100) pg TEQ g -1 lw (WHO, 1998 for birds) in the eggs of black-crowned night heron and whiskered tern, respectively. Compared to known sources, concentrations of PCDDs relative to the sum of PCDD/Fs in bird eggs, demonstrated high abundance of octachlorodibenzo-p-dioxin (OCDD), 1,2,3,4,6,7,8-heptaCDD and 1,2,3,6,7,8-hexaCDD indicating pentachlorophenol (PCP), and/or sodium pentachlorophenolate (Na-PCP) as significant sources of the PCDD/Fs. The presence of polychlorinated diphenyl ethers (PCDEs), hydroxylated and methoxylated polychlorinated diphenyl ethers (OH- and MeO-PCDEs, known impurities in PCP products), corroborates this hypothesis. Further, significant correlations were found between the predominant congener CDE-206, 3'-OH-CDE-207, 2'-MeO-CDE-206 and OCDD, indicating a common origin. Eggs from the two lakes are sometimes used for human consumption. The WHO health-based tolerable intake of PCDD/Fs is exceeded if eggs from the two lakes are consumed regularly on a weekly basis, particularly for children. The TEQs extensively exceed maximum levels for PCDD/Fs in hen eggs and egg products according to EU legislation (2.5 pg TEQ g -1 lw). The results suggest immediate action should be taken to manage the contamination, and further studies evaluating the impacts of egg consumption from wild birds in China. Likewise, studies on dioxins and other POPs in common eggs need to be initiated around China. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  19. Nest survival is influenced by parental behaviour and heterospecifics in a mixed-species colony

    Science.gov (United States)

    Brussee, Brianne E.; Coates, Peter S.; Hothem, Roger L.; Howe, Kristy; Casazza, Michael L.; Eadie, John M.

    2016-01-01

    Studies of avian nest success often focus on examining influences of variation in environmental and seasonal factors. However, in-depth evaluations can also incorporate variation in individual incubation behaviour to further advance our understanding of avian reproductive ecology. We examined these relationships in colonially nesting Black-crowned Night-Herons Nycticorax nycticorax using intensive video-monitoring methods to quantify incubation behaviours. We modelled nest survival as a function of both extrinsic factors and incubation behaviours over a 3-year period (2010–12) on Alcatraz Island, USA. Model-averaged parameter estimates indicated that nest survival increased as a function of greater incubation constancy (% of time spent incubating eggs within a 24-h period), and average daily precipitation throughout the nesting stage. Common Ravens Corvus corax are the only known nest predator of Night-Herons on Alcatraz Island, as on many other coastal Pacific islands. We also investigated the effects of heterospecific nesting of California Gulls Larus californicus and Western Gulls Larus occidentalis in a mixed-species colony with Night-Herons, based on nesting proximity data collected over a 2-year period (2011–12). This second analysis indicated that, in addition to incubation behaviours, nesting heterospecifics are an important factor for explaining variation in Night-Heron nest survival. However, contrary to our original expectation, we found that Night-Herons experienced increased nest survival with increasing distance from gull colony boundaries. These results may apply to other areas with multiple colonial nesting species and similar predator communities and climatic patterns.

  20. Spatial and temporal trends of contaminants in eggs of wading birds from San Francisco Bay, California

    Science.gov (United States)

    Hothem, R.L.; Roster, D.L.; King, K.A.; Keldsen, T.J.; Marois, Katherine C.; Wainwright, S.E.

    1995-01-01

    Between 1989 and 1991, reproduction by black-crowned night-herons (Nycticorax nycticorax) and snowy egrets (Egretta thula) was studied at sites in San Francisco Bay. Eggs were collected from these and other bay sites and from South Wilbur Flood Area, a reference site in California's San Joaquin Valley. Eggs were analyzed for inorganic trace elements, organochlorine pesticides, and polychlorinated biphenyls (PCBs). Results were compared among sites and years and with results of previous studies. There was some evidence of impaired reproduction, but concentrations of contaminants were generally lower than threshold levels for such effects. Egg hatchability was generally good, with predation being the factor that most limited reproductive success. Mean PCB concentrations were generally higher in eggs from the south end of San Francisco Bay than from the north, but the only temporal change, an increase, was observed at Alcatraz Island. There were spatial differences for p,p'-DDE in night-heron eggs in 1990, but the highest mean concentration of DDE was in night-heron eggs from South Wilbur in 1991. Temporal declines in maximum concentrations of DDE in eggs were observed in the bay, but means did not change significantly over time, At Bair Island in the southern end of the bay, mean concentrations of mercury decreased while selenium increased in night-heron eggs over time, but there were no clear bay-wide spatial or temporal trends for either element.

  1. Role of communally nesting ardeid birds in the epidemiology of West Nile virus revisited.

    Science.gov (United States)

    Reisen, William K; Wheeler, Sarah; Armijos, M Veronica; Fang, Ying; Garcia, Sandra; Kelley, Kara; Wright, Stan

    2009-06-01

    Although herons and egrets in the family Ardeidae frequently have been associated with viruses in the Japanese encephalitis virus serocomplex, communal nesting colonies do not appear to be a focus of early season and rapid amplification of West Nile virus (WNV) in California. Evidence for repeated WNV infection was found by testing living and dead nestlings collected under trees with mixed species ardeid colonies nesting above in an oak grove near the University of California arboretum in Davis and in a Eucalyptus grove at a rural farmstead. However, mosquito infection rates at both nesting sites were low and positive pools did not occur earlier than at comparison sites within the City of Davis or at the Yolo Bypass wetlands managed for rice production and waterfowl habitat. Black-crowned night herons (Nycticorax nycticorax) were the most abundant and frequently infected ardeid species, indicating that WNV may be an important cause of mortality among nestlings of this species.

  2. The foraging behaviour of herons and egrets on the Magela Creek flood plain, Northern Territory

    International Nuclear Information System (INIS)

    Recher, H.F.; Holmes, R.T.

    1982-03-01

    Five species of diurnal herons are common on the Magela Creek flood plain and forage along the edges of natural and artifical waterbodies both inside and outside the Ranger Uranium Project Area. The species of heron differ in the kinds and sizes of prey they take, their foraging location, degree of sociality and foraging behaviour. Because it takes relatively large fish, the Great Egret, E. alba, is most likely to be affected by any contamination of the aquatic environment by heavy metals or radionuclides. The Nankeen Night Heron, Nycticorax caledonicus is also abundant on the flood plain and probably feeds on large fish and frogs. The other herons take smaller or immature prey or hunt mostly in terrestrial habitats and are therefore less likely to be affected by contamination of the aquatic environment

  3. Avian species differences in the intestinal absorption of xenobiotics (PCB, dieldrin, Hg2+)

    Science.gov (United States)

    Serafin, J.A.

    1984-01-01

    1. Intestinal absorption of a polychlorinated biphenyl, dieldrin, and mercury (from HgCl2) was measured in adult Northern bobwhites, Eastern screech owls, American kestrels, black-crowned night-herons and mallards in vivo by an in situ luminal perfusion technique.2. Bobwhites, screech owls and kestrels absorbed much more of each xenobiotic than black-crowned night-herons and mallards.3. Mallards absorbed less dieldrin and mercury than black-crowned night-herons.4. Mercury absorption by kestrels was more than twice that in screech owls and eight times that observed in mallards.5. Pronounced differences in xenobiotic absorption rates between bobwhites, screech owls and kestrels on the one hand, and black-crowned night-herons and mallards on the other, raise the possibility that absorptive ability may be associated with the phylogenetic classification of birds.

  4. Waterbirds (other than Laridae nesting in the middle section of Laguna Cuyutlán, Colima, México

    Directory of Open Access Journals (Sweden)

    Eric Mellink

    2008-03-01

    Full Text Available Laguna de Cuyutlán, in the state of Colima, Mexico, is the only large coastal wetland in a span of roughly 1150 km. Despite this, the study of its birds has been largely neglected. Between 2003 and 2006 we assessed the waterbirds nesting in the middle portion of Laguna Cuyutlán, a large tropical coastal lagoon, through field visits. We documented the nesting of 15 species of non-Laridae waterbirds: Neotropic Cormorant (Phalacrocorax brasilianus, Tricolored Egret (Egretta tricolor, Snowy Egret (Egretta thula, Little Blue Heron (Egretta caerulea, Great Egret (Ardea alba, Cattle Egret (Bubulcus ibis, Black-crowned Nightheron (Nycticorax nycticorax, Yellow-crowned Night-heron (Nyctanassa violacea, Green Heron (Butorides virescens, Roseate Spoonbill (Platalea ajaja, White Ibis (Eudocimus albus, Black-bellied Whistling-duck (Dendrocygna autumnalis, Clapper Rail (Rallus longirostris, Snowy Plover (Charadrius alexandrinus, and Black-necked Stilt (Himantopus mexicanus. These add to six species of Laridae known to nest in that area: Laughing Gulls (Larus atricilla, Royal Terns (Thalasseus maximus, Gull-billed Terns (Gelochelidon nilotica, Forster’s Terns (S. forsteri, Least Terns (Sternula antillarum, and Black Skimmer (Rynchops niger, and to at least 57 species using it during the non-breeding season. With such bird assemblages, Laguna Cuyutlán is an important site for waterbirds, which should be given conservation status. Rev. Biol. Trop. 56 (1: 391-397. Epub 2008 March 31.Durante la prospección de la parte media de la Laguna Cuyutlán, una gran laguna costera en Colima, México, entre 2003 y 2006, documentamos la anidación de 15 especies de aves acuáticas que no pertenecer a la familia Laridae: Phalacrocorax brasilianus, Egretta tricolor, Egretta thula, Egretta caerulea, Ardea alba, Bubulcus ibis, Nycticorax nycticorax, Nyctanassa violacea, Butorides virescens, Platalea ajaja, Eudocimus albus, Dendrocygna autumnalis, Rallus longirostris

  5. Chlorinated hydrocarbons and biomarkers of exposure in wading birds and fish of the Lower Rio Grande Valley, Texas

    Science.gov (United States)

    Wainwright, S.E.; Mora, M.A.; Sericano, J.L.; Thomas, P.

    2001-01-01

    During 1997 we evaluated reproductive success in colonial water birds nesting in the Lower Rio Grande Valley (LRGV), Texas, and correlated success with concentrations of contaminants in eggs. We also measured steroid hormones and gonadosomatic index (GSI) as biomarkers of endocrine effects in common carp (Cyprinus carpio). Nest and fledging success of green herons (Butorides virescens) and great egrets (Ardea alba) were similar to those found in other parts of North America; however, nesting success of black-crowned night-herons (Nycticorax nycticorax) was lower, very likely due to flooding of the nesting area. Except for DDE and toxaphene, all chlorinated pesticides in bird eggs were low and not of concern for negative effects on any of the three species. DDE was highest in green heron eggs and seemed to increase along a geographic gradient from west to east, with eggs from Falcon Reservoir containing low concentrations, and those at Los Indios containing the highest concentrations (approx. 11,000 ng/g WW), near or above the threshold for reproductive impairment. DDE levels in great egrets and black-crowned night-herons were below those that are associated with reproductive impairment. Mean DDE levels in carp at the JAS Farms site were above the threshold level suggested for predator protection. Toxaphene was detected in about 20% of the samples with high levels observed in green heron eggs from Los Indios (mean = 4,402 ng/g WW). These are the highest toxaphene levels reported in bird eggs in the LRGV. Toxaphene levels in fish ranged between 90 and 312 ng/g WW. In general, PCBs in bird eggs and fish tissue were low and at levels not of concern for reproductive effects. The greatest concentrations of testosterone and 11-ketotestosterone were detected in fish from the JAS Farms site, which also had the greatest concentrations of DDE. Increased androgen production and gonad development in fish at this site, relative to Pharr, could be possibly associated with

  6. Organochlorine pesticide, polychlorinated biphenyl, trace element and metal residues in bird eggs from Salton Sea, California, 2004

    Science.gov (United States)

    Henny, Charles J.; Anderson, T.W.; Crayon, J.J.

    2008-01-01

    The Salton Sea is a highly eutrophic, hypersaline terminal lake that receives inflows primarily from agricultural drainages in the Imperial and Coachella valleys. Impending reductions in water inflow at Salton Sea may concentrate existing contaminants which have been a concern for many years, and result in higher exposure to birds. Thus, waterbird eggs were collected and analyzed in 2004 and compared with residue concentrations from earlier years; these data provide a base for future comparisons. Eggs from four waterbird species (black-crowned night-heron [Nycticorax nycticorax], great egret [Ardea alba], black-necked stilt [Himantopus mexicanus], and American avocet [Recurvirostra Americana]) were collected. Eggs were analyzed for organochlorine pesticides, polychlorinated biphenyls (PCBs), metals, and trace elements, with current results compared to those reported for eggs collected from the same species and others during 1985a??1993. The two contaminants of primary concern were p,pa??-DDE (DDE) and selenium. DDE concentrations in night-heron and great egret eggs collected from the northwest corner of Salton Sea (Whitewater River delta) decreased 91 and 95%, respectively, by 2004, with a concomitant increase in eggshell thickness for both species. Decreases in bird egg DDE levels paralleled those in tissues of tilapia (Oreochromis mossambicus ?? O. urolepis), an important prey species for herons and egrets. Despite most nests of night-herons and great egrets failing in 2004 due to predation, predicted reproductive effects based on DDE concentrations in eggs were low or negligible for these species. The 2004 DDE findings were in dramatic contrast to those in the past decade, and included an 81% decrease in black-necked stilt eggs, although concentrations were lower historically than those reported in night-herons and egrets. Selenium concentrations in black-necked stilt eggs from the southeast corner of Salton Sea (Davis Road) were similar in 1993 and 2004, with 4

  7. Reproduction in eastern screech-owls fed selenium

    Science.gov (United States)

    Wiemeyer, Stanley N.; Hoffman, D.J.

    1996-01-01

    Raptors are occasionally exposed to excessive selenium from contaminated prey, but the effects of this exposure on reproduction are unknown. Therefore, we fed captive eastern screech-owls (Otus asio) diets containing 0, 4.4, or 13.2 ppm (wet wt) added selenium in the form of seleno-DL-methionine. Adult mass at sacrifice and reproductive success of birds receiving 13.2 ppm selenium were depressed (P biochemistries indicative of oxidative stress were affected (P < 0.05) in 5-day-old nestlings from parents fed 4.4 ppm selenium and included a 19% increase in glutathione peroxidase activity, a 43% increase in the ratio of oxidized glutathione (GSSG) to reduced glutathione (GSH), and a 17% increase in lipid peroxidation. Based on reproductive effects relative to dietary exposure, sensitivity of eastern screech-owls to selenium was similar to that of black-crowned night-herons (Nycticorax nycticorax) but less than that of mallards (Anas platyrhynchos).

  8. Effects of contaminants on reproductive success of aquatic birds nesting at Edwards Air Force Base, California

    Science.gov (United States)

    Hothem, R.L.; Crayon, J.J.; Law, M.A.

    2006-01-01

    Contamination by organochlorine pesticides (OCs), polychlorinated biphenyls, metals, and trace elements at Edwards Air Force Base (EAFB), located in the Mojave Desert, could adversely affect nesting aquatic birds, especially at the sewage lagoons that comprise Piute Ponds. Estimates of avian reproduction, in conjunction with analyses of eggs and avian foods for contaminant residues, may indicate the potential for negative effects on avian populations. From 1996 to 1999, we conducted studies at the Piute Ponds area of EAFB to evaluate the impacts of contaminants on nesting birds. Avian reproduction was evaluated in 1999. Eggs were collected for chemical analyses in 1996 and 1999, and African clawed frogs (Xenopus laevis), a likely food source, were collected for chemical analyses in 1998. Avian species occupying the higher trophic levels-black-crowned night-heron (Nycticorax nycticorax), white-faced ibis (Plegadis chihi), and American avocet (Recurvirostra americana)-generally bioaccumulated higher concentrations of contaminants in their eggs. Reproductive success and egg hatchability of night-herons and white-faced ibises in the Piute Ponds were similar to results observed at other western colonies. Deformities were observed in only one embryo in this study, but concentrations of contaminants evaluated in this ibis embryo were considered insufficient to have caused the deformities. Because clawed frogs, a primary prey item for night-herons at Piute Ponds, had no detectable levels of any OCs, it is likely that OCs found in night-heron eggs were acquired from the wintering grounds rather than from EAFB. The presence of isomers of dichlorodiphenyltrichloroethane (DDT) in ibis eggs indicated recent exposure, but invertebrates used for food by ibises were not sampled at Piute Ponds, and conclusions about the source of OCs in ibis eggs could not be made. Concentrations of contaminants in random and failed eggs of individual species were not different, and we concluded

  9. Seasonal distribution of bird populations at the Patuxent Research Refuge

    Science.gov (United States)

    Hoffman, D.J.; Henny, C.J.; Hill, E.F.; Keith, J.A.; Grove, R.A.

    2000-01-01

    High concentrations of mercury from past mining activities have accumulated in the food chain of fish-eating birds nesting along the mid to lower Carson River. Activities of nine plasma and tissue enzymes, and concentrations of other plasma and tissue constituents were measured for black-crowned night-heron, Nycticorax nycticorax, (BCNH) and snowy egret, Egretta thula, (SE) nestlings from two high mercury sites and one low mercury site. Geometric mean blood Hg concentrations for BCNHs at the high mercury sites were 2.6 and 2.8 ppm (ww) and 0.6 ppm at the low mercury site. Blood concentrations for SEs were 3.6 and 1.9 ppm at the high mercury sites and 0.7 ppm at the low mercury site. In BCNHs plasma glutathione peroxidase (GSH peroxidase) activity was lower in both high mercury sites relative to the low mercury site. Butyryl cholinesterase (BuChe), ALT, glutathione reductase (GSSG-reductase) and LDH-L activities were lower in one high mercury site. In SEs significant differences were lower BuChe and LDH-L, but elevated GGT activities. Evidence of renal stress in both species at high mercury sites included increased plasma uric acid, blood urea nitrogen, and creatinine concentrations as well as oxidative stress in the kidney tissue itself where oxidized glutathione increased. A number of the mercury site-related effects, including decreased plasma GSH-peroxidase and hepatic G-6-PDH activities, higher GSSG-reductase activity, and lower hepatic concentrations of reduced thiols have been reported in methylmercury feeding studies with great egrets and mallards. These findings suggest the utility of herons and egrets for monitoring mercury sites.

  10. Transboundary pollution: Persistent organochlorine pesticides in migrant birds of the Southwestern United States and Mexico

    Science.gov (United States)

    Mora, Miguel A.

    1997-01-01

    The hypothesis that migratory birds accumulate persistent organochlorine pesticides (POPs) during the winter in Latin America has been prevalent for many years, particularly since 1,1,1-trichloro-2,2–bis(p-chlorophenyl)ethane (DDT) was banned in the United States in 1972. It has been suggested that peregrine falcons (Falco peregrinus), black-crowned night herons (Nycticorax nycticorax), white-faced ibises (Plegadis chihi), various migratory waterfowl and shorebirds, and other avian species accumulate higher concentrations of POPs while on migration or on their wintering grounds in Latin America. Nonetheless, the data obtained thus far are limited, and there is no clear pattern to suggest that such accumulation occurs on a widespread basis. In this review wildlife contaminant studies conducted along the U.S.-Mexico border and throughout Mexico are discussed. The results for the most part seem to indicate that no major accumulation of 2,2-bis(p-chlorophenyl)-1,1-dichloroethylene) (DDE), the most persistent organochlorine compound, has occurred or been reported for most parts of Mexico. The majority of the DDE values in birds from Mexico were similar to those reported in birds from the southwestern United States during the same years. More work needs to be done, particularly in those cotton-producing areas of Mexico where DDT was applied heavily in the past (e.g., Chiapas and Michoacan). Because DDT is still used for malaria control and may still be used in agriculture in Chiapas, this state is probably the one where most migrant species would still be at a significant risk of increased accumulation of DDE and DDT.

  11. Patrones de crecimiento postnatal en ocho especies de garzas (Ciconiiformes: Ardeidae

    Directory of Open Access Journals (Sweden)

    Dennis Denis Ávila

    2011-06-01

    Gompertz equations were adjusted to data using non-lineal regression models with adult values as the asymptote. For each species, the following were determined and recorded: growth rate, age at inflexion, instantaneous growth rates at each age interval, and time taken to reach 90% of adult size. Reported hatchling sizes were similar in other localities, with a variation coefficient ranging between 10-19%. At hatch, each species exhibited differing sizes relative to adult values. In all cases, Gompertz equations were best fitted to explain more variance and lesser residuals. Rates of weight change and tarsus growth were alometrically related to the log of adult weight. Two main growth processes were identified: a physical extension in dimensions of each measure ment reflecting inter-specific morphometric differences, and a lineal increase of the growth period from Green Heron to Great Egret. The Black-crowned Night Heron, Cattle Egret and Reddish Egret exhibited some unique measurement characteristics in comparison to the remaining members of the family. All results support the hypothesis that hypermorphosis, as the main evolutionary process in the microevolution of Ardeidae, is caused by a delayed final moment of growth. Rev. Biol. Trop. 59 (2: 771-787. Epub 2011 June 01.

  12. Persistent organochlorine pollutants in eggs of colonial waterbirds from Galveston Bay and East Texas, USA

    Science.gov (United States)

    Frank, D.S.; Mora, M.A.; Sericano, J.L.; Blankenship, Alan L.; Kannan, K.; Giesy, J.P.

    2001-01-01

    Eggs of neotropic cormorants (Phalacrocorax brasilianus), black-crowned night herons (Nycticorax nycticorax), and great egrets (Ardea alba) nesting on several locations in Galveston Bay (TX, USA) and at two control sites outside the bay were collected during April–May 1996 and analyzed for chlorinated pesticides, PCBs, polychlorinated dibenzo-p-dioxins, and polychlor-inated dibenzofurans. Additionally, concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalents (TCDD-EQs) were determined by use of relative potency factors (TEQs) or the H4IIE-luc bioassay TCDD-EQs. Concentrations of 1,1,-dichloro-2,2-bis(p-chlo-rophenyl)ethylene (DDE) were greater in eggs of neotropic cormorants from Alexander Island (mean = 1,040 ng/g wet wt) in the Houston Ship Channel (Houston, TX, USA) and in those from Telfair Island (mean = 1,460 ng/g wet wt), a reference location outside the bay, than in most locations inside the bay (mean range = 119–453 ng/g wet wt). Mean PCB concentrations were greater in eggs of neotropic cormorants from Alexander Island (mean = 5,720 ng/g wet wt) than in eggs of cormorants from areas farther away from the ship channel, including two reference sites outside the bay (mean range = 404–3,140 ng/g wet wt). The TCDD was the main dioxin congener detected in eggs from all locations within Galveston Bay. Instrumental TEQs in eggs ranged from 67 pg/g wet weight at control sites to 452 pg/g wet weight at Alexander Island. Concentrations of TCDD-EQs determined in the H4IIE assay were correlated with instrumental TEQs and were greater in eggs of cormorants from islands within the bay, although these were farther away from the ship channel. Overall, concentrations of DDE, PCBs, TCDD, and TCDD-EQs were less than the threshold levels known to affect reproduction. However, some eggs contained concentrations of total PCBs or DDE greater than what would elicit adverse effects on birds. No identifiable deformities or abnormalities were detected in embryos

  13. 14. The Herons (Ardeidae)

    Science.gov (United States)

    Kushlan, J.A.; Hancock, J.A.

    2005-01-01

    Herons and their close relatives, the egrets and bitterns, comprise sixty species in total and are found all over the world except in polar regions, and are a strikingly beautiful part of the wetlands they inhabit. They are particularly abundant and popular in South West USA, especially Florida. Herons are a diverse group, easily recognized by their long legs, necks and bills. Many species are notable for their sociality as they feed, roost, and nest together in single or mixed species assemblages. The authors have extensive experience of research and observation of these birds and this book provides an up to date comprehensive review of the herons of the world. Covering their biology, distribution, description, systematics, breeding, feeding, and conservation, James Hancock and James Kushlan have distilled their lifetimes' research on the heron into one volume. This volume is complemented by beautiful color paintings especially painted for the book, color photographs, and distribution maps.

  14. Response of roseate tern to a shoreline protection project on Falkner Island, Connecticut

    Science.gov (United States)

    Rogers, C.J.; Spendelow, J.A.; Guilfoyle, Michael P.; Fischer, Richard A.; Pashley, David N.; Lott, Casey A.

    2007-01-01

    subterranean channels, especially in the main revetment area, made it difficult to measure chick growth and productivity as had been done for more than 12 years prior to construction. Also, observations of color-banded adults that were unable to locate and feed their young inside the main revetment, and of adults returning to courtship behavior and renesting after having hatched chicks from their initial clutches, indicated that a minimum of 20% of the chicks (mostly first hatched A-chicks, which usually have high rates of survival to fledging) that entered the main revetment died after doing so in 2001. The mortality rate of Roseate Tern chicks that entered the secondary revetment on the southwest shelf, however, was not unusually high in 2001. In an attempt to reduce the likelihood of nesting and chick losses in these sub-colonies, a research team led by the USGS in 2002-2003 did not put nest boxes on the northeast and east shelf areas where previous losses had been high. However, losses of tern eggs and young chicks to predatory Black-crowned Night Herons (Nycticorax nycticorax) were so great in 2002?2003 that few Roseate Tern chicks survived long enough to move into the main revetment area and little comparative survival data were collected. The USFWS continues to remove predatory night herons, to monitor the location and success of nesting Roseate Terns and to fill in some of problem areas near the tern nests in the main revetment. The extensive chick-searching fieldwork and observational procedures used by the USGS-led research team to determine the growth and survival of the Roseate Tern chicks at Falkner Island were not used in 2004?2005. The number of chicks lost in the revetment during these years is not known. Without additional fill, loss of chicks of this endangered species in the main revetment may rise again even though the night heron predation problem has been reduced.

  15. Nineteenth century mercury: Hazard to wading birds and cormorants of the Carson River, Nevada

    Science.gov (United States)

    Henny, Charles J.; Hill, E.F.; Hoffman, D.J.; Spalding, Marilyn G.; Grove, Robert A.

    2002-01-01

    Contemporary mercury interest relates to atmospheric deposition, contaminated fish stocks and exposed fish-eating wildlife. The focus is on methylmercury (MeHg) even though most contamination is of inorganic (IoHg) origin. However, IoHg is readily methylated in aquatic systems to become more hazardous to vertebrates. In response to a classic episode of historical (1859a??1890) IoHg contamination, we studied fish-eating birds nesting along the lower Carson River, Nevada. Adult double-crested cormorants (Phalacrocorax auritus), snowy egrets (Egretta thula) and black-crowned night-herons (Nycticorax nycticorax) contained very high concentrations of total mercury (THg) in their livers (geo. means 134.8g/g wet weight (ww), 43.7 and 13.5, respectively) and kidneys (69.4, 11.1 and 6.1, respectively). Apparently tolerance of these concentrations was possible due to a threshold-dependent demethylation coupled with sequestration of resultant IoHg. Demethylation and sequestration processes also appeared to have reduced the amount of MeHg redistributed to eggs. However, the relatively short time spent by adults in the contaminated area before egg laying was also a factor in lower than expected concentrations of mercury in eggs. Most eggs (100% MeHg) had concentrations below 0.80g/g ww, the putative threshold concentration where reproductive problems may be expected; there was no conclusive evidence of mercury-related depressed hatchability. After hatching, the young birds were fed diets by their parents averaging 0.36a??1.18gMeHg/g ww through fledging. During this four to six week period, accumulated mercury concentrations in the organs of the fledglings were much lower than found in adults, but evidence was detected of toxicity to their immune (spleen, thymus, bursa), detoxicating (liver, kidneys) and nervous systems. Several indications of oxidative stress were also noted in the fledglings and were most apparent in young cormorants containing highest concentrations of

  16. Nineteenth century mercury hazard to wading birds and cormorants of the Carson River, Nevada

    Science.gov (United States)

    Henny, C.J.; Hill, E.F.; Hoffman, D.J.; Spalding, M.G.; Grove, R.A.

    2002-01-01

    Contemporary mercury interest relates to atmospheric deposition, contaminated fish stocks and exposed fish-eating wildlife. The focus is on methylmercury (MeHg) even though most contamination is of inorganic (IoHg) origin. However, IoHg is readily methylated in aquatic systems to become more hazardous to vertebrates. In response to a classic episode of historical (1859-1890) IoHg contamination, we studied fish-eating birds nesting along the lower Carson River, Nevada. Adult double-crested cormorants (Phalacrocorax auritus), snowy egrets (Egretta thula) and black-crowned night-herons (Nycticorax nycticorax) contained very high concentrations of total mercury (THg) in their livers (geo. means 134.8 g/g wet weight [ww], 43.7, and 13.5, respectively) and kidneys (69.4, 11.1, and 6.1, respectively). Apparently tolerance of these concentrations was possible due to post-absorption demethylation and sequestration of resultant IoHg. Demethylation and sequestration processes also appeared to have reduced the amount of MeHg redistributed to eggs. However, the relatively short time spent by adults in the contaminated area before egg laying was also a factor in lower than expected concentrations of mercury in eggs. Most eggs (100% MeHg) had concentrations below 0.80 g/g ww, the putative threshold concentration where reproductive problems may be expected; there was no conclusive evidence of depressed hatchability. After hatching, the young birds were fed diets by their parents averaging 0.36 to 1.18 gMeHg/g ww through fledging. During this four to six week period, accumulated mercury concentrations in the organs of the fledglings were much lower than found in adults, but evidence was detected of toxicity to their immune (spleen, thymus, bursa), detoxicating (liver, kidneys) and nervous systems. Several indications of oxidative stress were also noted in the fledglings and were most apparent in young cormorants containing highest concentrations of mercury. This stress was

  17. Radiocesium dynamics in herons inhabiting a contaminated reservoir system

    International Nuclear Information System (INIS)

    Dombey, A.H.; Paine, D.; McFarlane, R.W.

    1977-01-01

    The little blue heron (Florida caerulea) and the green heron (Butorides virescens) nest at a radionuclide-contaminated reservoir on the Savannah River Plant near Aiken, South Carolina. Green herons distributed their nests singly along the periphery of the reservoir but fed their nestlings exclusively upon amphibians collected from adjacent uncontaminated Carolina bays. Radiocesium burdens in green heron nestlings did not exceed 5 pCi/g wet wt. and 12 regurgitated food pellets averaged 0.2 pCi/g. Twelve pairs of little blue herons established a heronry upon a small island and fed their nestlings fish and amphibians foraged from within the differentially radionuclide-contaminated reservoir system. Nestlings within the same nest did not exhibit significant differences in body burdens, and the maximum radiocesium burden determined was 27.4 pCi/g wet wt. Substantial differences were found between nestlings from different nests however. The radiocesium level of 43 regurgitated food pellets had a high correlation with observed levels in the nestlings, and variation in food contamination is believed to be the major contributor in the observed variation in the nestlings. The variable contamination of primary prey species was correlated with the differentially contaminated foraging sites and indicates that adult little blue herons tended to spatially partition the available foraging areas. (author)

  18. Heron Island, Australia

    Science.gov (United States)

    2002-01-01

    Heron Island is located at the sourthern end of Australia's 2,050 km-long Great Barrier Reef. Surrounded by coral reef and home to over 1000 species of fish, scuba divers and scientists alike are drawn to the island's resort and research station. The true-color image above was taken by Space Imaging's Ikonos satellite with a resolution of 4 meters per pixel-high enough to see individual boats tied up at the small marina. The narrow channel leading from the marina to the ocean was blasted and dredged decades ago, before the island became a national park. Since then the Australian government has implemented conservation measures, such as limiting the number of tourists and removing or recycling, instead of incinerating, all trash. One of the applications of remote sensing data from Ikonos is environmental monitoring, including studies of coral reef health. For more information about the island, read Heron Island. Image by Robert Simmon, based on data copyright Space Imaging

  19. ADAPTIVE CHARACTERISTICS OF HERONS PLUMAGE FOR THEIR WAY OF LIFE

    Directory of Open Access Journals (Sweden)

    Koshelev V. A.

    2011-12-01

    Full Text Available Feather cover of each bird species reflects spectra of species, age, sex and environmental attributes defined the phylogeny of taxa, habitat and life patterns. In turn, many ecological phenomena in the birds’ life patterns are directly dependent on the state of plumage (e.g., time of breeding, seasonal migration, roost flights. For the first time the quantitative characterization of six heron species' plumage were done as well as the description of powder down feathers. The adaptive features of feathers and various types of heron’s plumages were discussed.The structure of contour feathers of herons is related to the peculiarities of species life pattern. All the species have a relatively small number of contour feathers, despite their large body size. According to this index the herons are more similar to typical wading birds (gulls, sandpipers than for waterfowl. The total number of heron feathers slightly increase in winter, because they are migratory species. Structure of contour feathers of herons corresponds to that of other waterbirds. The rod is not bent, the feathers are large, and the mounting angle to the surface of the body is little. The cores of abdominal feather fracts reduce heat transfer and can be regarded as an adaptation factor to aquatic environment.Buoyancy is provided by heron’s feathers insignificantly, in contrast to the typical waterfowl species. Significant subcutaneous fat stores are typical for herons in spring, autumn and winter, increased buoyancy and being the energy reserves provide thermoregulation in cold environment. Our data indicate weak adaptation of herons’ plumage to aquatic environments, but also confirm its insulating properties, which is prove the herons semi-aquatic rather than aquatic life patterns.Due to color of plumage some three groups of herons were considered: white, mottled and camouflaged. Coloration of second and third group performs a protective function. We didn’t found a clear

  20. Nesting season food habits of 4 species of Herons and Egrets at Lake Okeechobee, Florida

    Science.gov (United States)

    Smith, J.P.

    1997-01-01

    Based on the composition of nestling regurgitations collected during 3 breeding seasons, fish were the most important prey group for Great Egrets (Ardea alba: N = 200 nest-day samples; aggregate percent biomass [APB] = 73.4%), Snowy Egrets (Egretta thula: N = 115; APB = 91.4%), and Tricolored Herons (E. tricolor. N = 68; APB = 97.3%). For Little Blue Herons (E. caerulerr. N = 57), grass shrimp (Palaemoneles paludosus; APB = 39.7%) ranked higher in overall importance than all fishes combined (APB = 36.5%). Dietary overlap, as measured by Schoener's Similarity Index, was greatest between Snowy Egrets and Tricolored Herons (77%) and lowest between Tricolored Herons and Little Blue Herons (30%). Diet diversity, as measured by Shannon's Index, was highest for Great Egrets (2.04), intermediate for Snowy Egrets (1.71) and Tricolored Herons (1.68), and lowest for Little Blue Herons (1.60). Great Egrets ate a wider variety of fish species and sizes, especially larger fishes, and more crayfish than the other species. Little Blue Herons ate fewer fish and more grass shrimp and insects, and ate smaller forage fishes than Tricolored Herons but similar-sized fish as Snowy Egrets. The coarse-scale trophic composition of Snowy Egret and Tricolored Heron diets did not differ significantly, but Tricolored Herons ate larger forage fishes than Snowy Egrets. Pronounced interannual and intercolony variation in diet composition suggested that Great Egrets and Little Blue Herons switched prey types as hydrologic conditions and habitat availability changed. Conversely, lack of such variation suggested that Snowy Egrets and Tricolored Herons adjusted their foraging tactics to ensure contin-ued encounters with preferred prey despite changing habitat conditions. These results are generally consistent with other published data, help confirm some generalizations about foraging strategies and patterns of niche differentiation among these ecologically similar species, and have implications for

  1. Foggy days and dry nights determine crown-level water balance in a seasonal tropical Montane cloud forest.

    Science.gov (United States)

    Gotsch, Sybil G; Asbjornsen, Heidi; Holwerda, Friso; Goldsmith, Gregory R; Weintraub, Alexis E; Dawson, Todd E

    2014-01-01

    The ecophysiology of tropical montane cloud forest (TMCF) trees is influenced by crown-level microclimate factors including regular mist/fog water inputs, and large variations in evaporative demand, which in turn can significantly impact water balance. We investigated the effect of such microclimatic factors on canopy ecophysiology and branch-level water balance in the dry season of a seasonal TMCF in Veracruz, Mexico, by quantifying both water inputs (via foliar uptake, FU) and outputs (day- and night-time transpiration, NT). Measurements of sap flow, stomatal conductance, leaf water potential and pressure-volume relations were obtained in Quercus lanceifolia, a canopy-dominant tree species. Our results indicate that FU occurred 34% of the time and led to the recovery of 9% (24 ± 9.1 L) of all the dry-season water transpired from individual branches. Capacity for FU was independently verified for seven additional common tree species. NT accounted for approximately 17% (46 L) of dry-season water loss. There was a strong correlation between FU and the duration of leaf wetness events (fog and/or rain), as well as between NT and the night-time vapour pressure deficit. Our results show the clear importance of fog and NT for the canopy water relations of Q. lanceifolia. © 2013 John Wiley & Sons Ltd.

  2. Colony Development and Density-Dependent Processes in Breeding Grey Herons

    Directory of Open Access Journals (Sweden)

    Takeshi Shirai

    2013-01-01

    Full Text Available The density-dependent processes that limit the colony size of colonially breeding birds such as herons and egrets remain unclear, because it is difficult to monitor colonies from the first year of their establishment, and the most previous studies have considered mixed-species colonies. In the present study, single-species colonies of the Grey Heron (Ardea cinerea were observed from the first year of their establishment for 16 years in suburban Tokyo. Colony size increased after establishment, illustrating a saturation curve. The breeding duration (days from nest building to fledging by a pair increased, but the number of fledglings per nest decreased, with colony size. The reproductive season in each year began earlier, and there was greater variation in the timing of individual breeding when the colony size was larger. The prolonged duration until nestling feeding by early breeders of the colony suggests that herons at the beginning of the new breeding season exist in an unsteady state with one another, likely owing to interactions with immigrant individuals. Such density-dependent interference may affect reproductive success and limit the colony size of Grey Herons.

  3. 'HERON' as a dark matter detector?

    International Nuclear Information System (INIS)

    Adams, J.S.; Bandler, S.R.; Brouer, S.M.; Enss, C.; Lanou, R.E.; Maris, H.J.; More, T.; Seidel, G.M.

    1996-01-01

    ''HERON'', which is the acronym for '' Helium: Roton detection of Neutrinos'', is a project whose principal goal is a next generation detector of solar neutrinos from the p-p and 7 Be branches. It will utilize superfluid helium as the target material and employ event energy transport out of the target by phonon and roton processes unique to helium. Many of the challenges presented for dark matter detection are very similar to those for low energy solar neutrinos. We present new results from our feasibility studies for HERON which indicate an asymmetry in the roton emission distribution from stopping particles and the ability to detect simultaneously the ultraviolet fluorescence photons also emitted. These features are potentially valuable for solar neutrino detection and the question is explored as to whether or not the same helium technique could be valuable for WIMP dark matter detection

  4. When the dragon wore the crown putting starlight back into myth

    CERN Document Server

    Cerow, Don

    2013-01-01

    When our ancestors gazed upon the skies thousands of years ago they looked up into the center of Creation and saw a mighty Dragon, a great celestial serpent with wings circling ceaselessly above them, night after night, century after century. When the Dragon Wore the Crown is a ground breaking book that covers a period of over six thousand years, focusing on what astrologers would call the Ages of Gemini, Taurus and Aries and taking us through the period of classical astronomy with the Greeks and Romans (approx. 7000 BC-200 AD).When the Dragon Wore the Crown opens and closes with the Chinese m

  5. Night shift work and incident diabetes among U.S. black women

    Science.gov (United States)

    Vimalananda, Varsha G.; Palmer, Julie R.; Gerlovin, Hanna; Wise, Lauren A.; Rosenzweig, James L.; Rosenberg, Lynn; Narváez, Edward A. Ruiz

    2015-01-01

    Aims To assess shift work in relation to incident type 2 diabetes among African American women. Methods In the Black Women's Health Study (BWHS), an ongoing prospective cohort study, we followed 28,041 participants for incident diabetes during 2005-2013. They answered questions in 2005 about having worked the night shift. We estimated hazard ratios (HR) and 95% confidence intervals (CI) for incident diabetes using Cox proportional hazards models. The basic multivariable model included age, time period, family history of diabetes, education, and neighborhood SES. In further models, we controlled for lifestyle factors and body mass index (BMI). Results Over the 8 years of follow-up, there were 1,786 incident diabetes cases. Relative to never having worked the night shift, HRs (95% CI) of diabetes were 1.17 (1.04, 1.31) for 1-2 years of night shift work, 1.23 (1.06, 1.41) for 3-9 years, and 1.42 (1.19, 1.70) for ≥ 10 years (P-trend shift work and type 2 diabetes remained after multivariable adjustment (P-trend = 0.02). The association did not vary by obesity status, but was stronger in women aged shift work were associated with an increased risk of type 2 diabetes. The association was only partially explained by lifestyle factors and BMI. A better understanding of the mechanisms by which shift work may affect risk of diabetes is needed in view of the high prevalence of shift work among U.S. workers. PMID:25586362

  6. The heron that laid the golden egg: metals and metalloids in ibis, darter, cormorant, heron, and egret eggs from the Vaal River catchment, South Africa.

    Science.gov (United States)

    van der Schyff, V; Pieters, R; Bouwman, H

    2016-06-01

    Metal pollution issues are afforded the highest priority in developing countries. Only one previous study has addressed metals in African bird eggs. We determined the concentration of metals and metalloids in bird eggs from four sites in the Vaal River catchment (VRC) of South Africa to provide data on the current situation. We analysed 16 pools of 77 heron, ibis, darter, egret, and cormorant eggs for 18 metals and metalloids using ICP-MS. We found high concentrations of gold (Au), uranium (U), thallium (Tl), and platinum (Pt) in Grey Heron eggs from Baberspan. Great white egrets from Bloemhof Dam had high concentrations of mercury (Hg). Multivariate analyses revealed strong associations between Au and U, and between palladium (Pd) and Pt. The toxic reference value (TRV) for Hg was exceeded in seven pools. Selenium exceeded its TRV in one pool; in the same pool, copper (Cu) reached its TRV. Compared with other studies, VRC bird eggs had high concentrations of contaminants. Based on these high concentrations, human health might be at risk as Grey Herons and humans share similar food and are therefore exposed to the same contaminants.

  7. Inscribed polygons and Heron polynomials

    International Nuclear Information System (INIS)

    Varfolomeev, V V

    2003-01-01

    Heron's well-known formula expressing the area of a triangle in terms of the lengths of its sides is generalized in the following sense to polygons inscribed in a circle: it is proved that the area is an algebraic function of the lengths of the edges of the polygon. Similar results are proved for the diagonals and the radius of the circumscribed circle. The resulting algebraic equations are studied and elementary geometric applications of the algebraic results obtained are presented

  8. Great Blue Herons in Puget Sound

    Science.gov (United States)

    2007-06-01

    consolidation of the breeding population into relatively few, large reproductive centers. With the breeding population centralized, these colonies become...During nesting and reproduction , heron eggs and young fall prey to forest- associated raptors and other predators, further linking the complexity of...nests up to a meter wide and one-half meter deep. An adequate supply of nest material is also important; both deciduous and conifer twigs are utilized

  9. Definitions of night eating in adolescent girls

    NARCIS (Netherlands)

    Striegel-Moore, RH; Thompson, D; Franko, DL; Barton, B; Affenito, S; Schreiber, GB; Daniels, [No Value

    Objective: To describe the prevalence of night eating in a community cohort of black and white girls, using different definitions of night eating as described in the literature. Research Methods and Procedures: Three-day food diaries collected as part of the National Growth and Health Study were

  10. Diel coral reef acidification driven by porewater advection in permeable sands, Heron Island, Great Barrier Reef

    DEFF Research Database (Denmark)

    Santos, Isaac R.; Glud, Ronnie N.; Maher, Damien

    2011-01-01

    Little is known about how biogeochemical processes in permeable sediments affect the pH of coastal waters. We demonstrate that seawater recirculation in permeable sands can play a major role in proton (H+) cycling in a coral reef lagoon. The diel pH range (up to 0.75 units) in the Heron Island...... lagoon was the broadest ever reported for reef waters, and the night‐time pH (7.69) was comparable to worst‐case scenario predictions for seawater pH in 2100. The net contribution of coarse carbonate sands to the whole system H+ fluxes was only 9% during the day, but approached 100% at night when small...... scale (i.e., flow and topography‐induced pressure gradients) and large scale (i.e., tidal pumping as traced by radon) seawater recirculation processes were synergistic. Reef lagoon sands were a net sink for H+, and the sink strength was a function of porewater flushing rate. Our observations suggest...

  11. Metal Concentrations, Foraging Distances, and Fledging Success of Great Blue Herons Nesting Along the Hanford Reach of the Columbia River

    Energy Technology Data Exchange (ETDEWEB)

    Tiller, Brett L.; Marco, Jeffrey D.; Rickard, William H.

    2005-05-01

    Excrement sample and livers of juvenile great blue herons were collected at nests at three widely separated colonies along the Hanford Reach of the Columbia River to test the validity of using excrement samples as indicators of metal concentrations in tissues of juvenile herons fed food collected by parent birds within a few kilometers of nests. There was no positive relation noted between metal concentrations in excrement and liver samples taken from the same nests. Statistically significant differences in metal concentrations were noted in excrement samples collected among the different heron colonies. Arsenic, Cd, Cr, and Pb concentrations (dry wt.) were higher in excrement than in liver samples but the opposite was noted for Cu, Hg, and Zn. Mercury concentrations in heron liver samples were biomagnified to a greater extent than Cd and Cr. Fledging success and eggshell thickness measurements were used as indicators of population health. These values were equivalent to or better than those noted for heron colonies elsewhere in the United States.

  12. Chondrosarcoma in a wild great white heron from southern Florida.

    Science.gov (United States)

    Spalding, M G; Woodard, J C

    1992-01-01

    A typical chondrosarcoma is reported from the nictitating membrane of a great white heron (Ardea herodius occidentalis). This is the first report of a neoplasm in a free flying ciconiiform, and was the only one found in a survey of 957 carcasses from Florida.

  13. Short Note Brood parasitism in the Green-backed Heron ( Butorides ...

    African Journals Online (AJOL)

    Short Note Brood parasitism in the Green-backed Heron (Butorides striatus). R Yosef, P Zduniak. Abstract. Ostrich 2005, 76(1&2): 78–79. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.2989/00306520509485476 · AJOL African Journals Online.

  14. Canada’s Evolving Crown: From a British Crown to a “Crown of Maples”

    Directory of Open Access Journals (Sweden)

    Romaniuk Scott Nicholas

    2014-12-01

    Full Text Available This article examines how instruments have changed the Crown of Canada from 1867 through to the present, how this change has been effected, and the extent to which the Canadian Crown is distinct from the British Crown. The main part of this article focuses on the manner in which law, politics, and policy (both Canadian and non-Canadian have evolved a British Imperial institution since the process by which the federal Dominion of Canada was formed nearly 150 years ago through to a nation uniquely Canadian as it exists today. The evolution of the Canadian Crown has taken place through approximately fifteen discrete events since the time of Canadian confederation on July 1, 1867. These fifteen events are loosely categorized into three discrete periods: The Imperial Crown (1867-1930, A Shared Crown (1931-1981, and The Canadian Crown (1982-present.

  15. Dinar-crown banknotes

    OpenAIRE

    Pantelić Svetlana

    2017-01-01

    Dinar-crown banknotes were: ½ dinars (i.e. 2 crowns), 1 dinar (i.e. 4 crowns), 5 dinars (i.e. 20 crowns), 10 dinars (i.e. 40 crowns), 20 dinars (i.e. 80 crowns), 100 dinars (i.e. 400 crowns), and 1000 dinars (i.e. 4000 crowns). The ½- and 1-dinar banknotes are assumed to have been issued in 1919, whereas the other five banknotes, according to one source, were released into circulation on 21.02.1920. Pursuant to the regulations, the replacement of the nostrified crown banknotes by the new crow...

  16. Results of bald eagle, osprey and great blue heron nest site surveys near Fort MacKay, Alberta

    International Nuclear Information System (INIS)

    Strom, K.; Balagus, P.

    1996-01-01

    As part of the environmental impact assessment process, a study was conducted to assess the occurrence of bald eagle, osprey and great blue heron on Syncrude's proposed oil sand leases near Fort MacKay. The objective of the study was to determine the relative abundance, habitat preferences and nesting occurrences of these different birds. Aerial count surveys were conducted to include coverage of the shorelines of four rivers and 22 lakes. Breeding activities of the osprey, bald eagle and great blue heron were observed in the regional study area, but not in the local study area. 14 refs., 1 tab., 4 figs

  17. Environmental contaminants in great blue herons (Ardea herodias) from the lower Columbia and Willamette Rivers, Oregon and Washington, USA

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, C.M.; Anthony, R.G.

    1999-12-01

    Great blue heron (Ardea herodias) eggs and prey items were collected from six colonies in Oregon and Washington, USA, during 1994 to 1995. Contaminant concentrations, reproductive success, and biomagnification factors were determined and effects of residue levels were measured by H4IIE rat hepatoma bioassays. Mean residue concentrations in heron eggs and prey items were generally low. However, elevated concentrations of polychlorinated biphenyls (PCBs) were detected in eggs and prey from Ross Island on the Willamette River. Biomagnification factors varied among sites. Sites were not significantly different in H4IIE tetrachlorodibenzo-p-dioxin equivalents (TCDD-EQs), although the TCDD-EQ for Karlson Island was 9 to 20 times greater than that of any other site. Large differences existed between toxic equivalents calculated from egg residue concentrations and TCDD-EQs, which indicated nonadditive interactions among the compounds. Tetrachlorodibenzo-p-dioxin equivalents and nest failure were positively correlated with TCDD concentration. Fledging and reproductive rates were similar to those determined for healthy heron populations, however, indicating that any adverse effects were occurring at the individual level and not at the colony level. Their results support the use of great blue herons as a biomonitor for contamination in aquatic ecosystems. Their relatively low sensitivity to organochlorine contaminants and high trophic position allows contaminant accumulation and biomagnification without immediate adverse effects that are often seen in other, more sensitive species.

  18. on black ironbark (Eucalyptus

    African Journals Online (AJOL)

    (Apis meOifera) on black ironbark. (Eucalyptus sideroxylon). B. Buys. Plant Protection Research Institute, Private Bag X5017,. Stellenbosch, 7600 Republic of South Africa. Received May /984; accepted 28 November /986. Black ironbark trees secrete nectar during the night. Argentine ants collected 42% of the nectar before ...

  19. Dinar-crown banknotes

    Directory of Open Access Journals (Sweden)

    Pantelić Svetlana

    2017-01-01

    Full Text Available Dinar-crown banknotes were: ½ dinars (i.e. 2 crowns, 1 dinar (i.e. 4 crowns, 5 dinars (i.e. 20 crowns, 10 dinars (i.e. 40 crowns, 20 dinars (i.e. 80 crowns, 100 dinars (i.e. 400 crowns, and 1000 dinars (i.e. 4000 crowns. The ½- and 1-dinar banknotes are assumed to have been issued in 1919, whereas the other five banknotes, according to one source, were released into circulation on 21.02.1920. Pursuant to the regulations, the replacement of the nostrified crown banknotes by the new crown- dinar banknotes started on 3 February 1920 in Serbia and Montenegro and on 16 February 1920 in other parts of the country. All seven denominations of the dinar-crown banknotes were being withdrawn from circulation throughout a lengthy period of time from 21 February 1921 until May 1934. The first to be withdrawn were the 20-dinar banknotes, from 1 February to 30 April 1921, then the 5-dinar banknotes, from 20 July to 20 November 1922, and the 10-dinar banknotes, from 10 February to 10 June 1924. The 100-dinar (400-crown and 1000-dinar (4000-crown banknotes remained in circulation the longest. The withdrawal of the 100- and 1000-dinar banknotes started in 1929 and lasted until 25 May 1934. The 1924 rulebook on minting coins of ½, 1 and 2 dinars precisely defines their withdrawal from circulation and replacement by minted coins within one year after the last batch of minted coins gets released into circulation. However, in 1927 the decree of the Minister of Finance prescribed that the remaining paper banknotes be withdrawn from circulation on 30 September 1927 by being replaced by the metal coins of the same denominations.

  20. Black stain and dental caries in Filipino schoolchildren.

    NARCIS (Netherlands)

    Heinrich-Weltzien, R.; Monse, B.; Palenstein Helderman, W.H. van

    2009-01-01

    Black stain is defined as dark pigmented exogenous substance in lines or dots parallel to the gingival margin and firmly adherent to the enamel at the cervical third of the tooth crowns in the primary and permanent dentition. OBJECTIVES: This study was conducted to assess the prevalence of black

  1. Blood biomarkers and contaminant levels in feathers and eggs to assess environmental hazards in heron nestlings from impacted sites in Ebro basin (NE Spain)

    International Nuclear Information System (INIS)

    Barata, C.; Fabregat, M.C.; Cotin, J.; Huertas, D.; Sole, M.; Quiros, L.; Sanpera, C.; Jover, L.; Ruiz, X.; Grimalt, J.O.; Pina, B.

    2010-01-01

    Blood biomarkers and levels of major pollutants in eggs and feathers were used to determine pollution effects in nestlings of the Purple Heron Ardea purpurea and the Little Egret Egretta garzetta, sampled on three Ebro River (NE Spain) areas: a reference site, a site affected by the effluents of a chlor-alkali industry and the river Delta. The two impacted heron populations showed mutually different pollutant and response patterns, suggesting different sources of contamination. In the population nesting near the chlor-alkali plant, elevated levels of hexachlorobenzene (HCB) and polychlorobiphenyls (PCBs) in eggs, and mercury in feathers in A. purpurea chicks were related with reduced blood antioxidant defenses and increased levels of micronuclei. In Ebro Delta, high levels of plasmatic lactate dehydrogenase in A. purpurea chicks and high frequency of micronuclei in blood of both species were tentatively associated with intensive agricultural activities taking place in the area. These results provide the first evidence of a biological response in heron chicks to the release of pollutants at a chlor-alkali plant. - High levels of organochlorine and mercury levels in eggs and feathers were related with altered blood biomarkers of heron nesting chicks.

  2. Crown-rise and crown-length dynamics: applications to loblolly pine

    Science.gov (United States)

    Harry T. Valentine; Ralph L. Amateis; Jeffrey H. Gove; Annikki. Makela

    2013-01-01

    The original crown-rise model estimates the average height of a crown-base in an even-aged mono-species stand of trees. We have elaborated this model to reduce bias and prediction error, and to also provide crown-base estimates for individual trees. Results for the latter agree with a theory of branch death based on resource availability and allocation.We use the...

  3. Predicting mortality of ponderosa pine regeneration after prescribed fire in the Black Hills, South Dakota, USA

    Science.gov (United States)

    Mike Battaglia; Frederick W. Smith; Wayne D. Shepperd

    2009-01-01

    Reduction of crown fire hazard in Pinus ponderosa forests in the Black Hills, SD, often focuses on the removal of overstorey trees to reduce crown bulk density. Dense ponderosa pine regeneration establishes several years after treatment and eventually increases crown fire risk if allowed to grow. Using prescribed fire to control this regeneration is...

  4. Baseline report - tall upland shrubland at the Rocky Flats Environmental Technology Site

    International Nuclear Information System (INIS)

    1997-03-01

    Rocky Flats Environmental Technology Site (Site) is located on the Colorado Piedmont east of the Front Range between Boulder and Golden. At an elevation of approximately 6,000 feet, the Site contains a unique ecotonal mixture of mountain and prairie plant species, resulting from the topography and close proximity to the mountain front. The Buffer Zone surrounding the Industrial Area is one of the largest remaining undeveloped areas of its kind along the Colorado Piedmont. A number of plant communities at the Site have been identified as increasingly rare and unique by Site ecologists and the Colorado Natural Heritage Program (CNHP). These include the xeric tallgrass prairie, tall upland shrubland, wetlands, and Great Plains riparian woodland communities. Many of these communities support populations of increasingly rare animals as well, including the Preble's meadow jumping mouse, grasshopper sparrow, loggerhead shrike, Merriam's shrew, black crowned night heron, and Hops blue and Argos skipper butterflies. One of the more interesting and important plant communities at the Site is the tall upland shrubland community. It has been generally overlooked by previous Site ecological studies, probably due to its relatively small size; only 34 acres total. Although mentioned in a plant community ordination study conducted by Clark et al. and also in the Site baseline ecological study, few data were available on this plant community before the present study

  5. Baseline report - tall upland shrubland at the Rocky Flats Environmental Technology Site

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Rocky Flats Environmental Technology Site (Site) is located on the Colorado Piedmont east of the Front Range between Boulder and Golden. At an elevation of approximately 6,000 feet, the Site contains a unique ecotonal mixture of mountain and prairie plant species, resulting from the topography and close proximity to the mountain front. The Buffer Zone surrounding the Industrial Area is one of the largest remaining undeveloped areas of its kind along the Colorado Piedmont. A number of plant communities at the Site have been identified as increasingly rare and unique by Site ecologists and the Colorado Natural Heritage Program (CNHP). These include the xeric tallgrass prairie, tall upland shrubland, wetlands, and Great Plains riparian woodland communities. Many of these communities support populations of increasingly rare animals as well, including the Preble`s meadow jumping mouse, grasshopper sparrow, loggerhead shrike, Merriam`s shrew, black crowned night heron, and Hops blue and Argos skipper butterflies. One of the more interesting and important plant communities at the Site is the tall upland shrubland community. It has been generally overlooked by previous Site ecological studies, probably due to its relatively small size; only 34 acres total. Although mentioned in a plant community ordination study conducted by Clark et al. and also in the Site baseline ecological study, few data were available on this plant community before the present study.

  6. Beautiful Black: A Bibliography about the Night for Young Readers from Preschool through Junior High.

    Science.gov (United States)

    Sumner, Mary Ann, Comp.

    This bibliography offers a "magical adventure into the dark and dreamy world of the night." It contains annotations for 146 books, available for free to the blind and disabled, that cover various things associated with the night: dreams, monsters and ghosts, overcoming fear of the dark, nights in other countries that are six months long,…

  7. Influence of the heron colony on heavy metals accumulation in soil of Dniprovsko-Orilsky nature reserve

    Directory of Open Access Journals (Sweden)

    M. V. Vovk

    2005-01-01

    Full Text Available The article is devoted to the research of the settlements of heron on the accumulation of heavy metals in the soil. The author considers accumulation of trace elements in different soil horizons. The reasons of the prohibitions has been rate.

  8. Photometric Assessment of Night Sky Quality over Chaco Culture National Historical Park

    Science.gov (United States)

    Hung, Li-Wei; Duriscoe, Dan M.; White, Jeremy M.; Meadows, Bob; Anderson, Sharolyn J.

    2018-06-01

    The US National Park Service (NPS) characterizes night sky conditions over Chaco Culture National Historical Park using measurements in the park and satellite data. The park is located near the geographic center of the San Juan Basin of northwestern New Mexico and the adjacent Four Corners state. In the park, we capture a series of night sky images in V-band using our mobile camera system on nine nights from 2001 to 2016 at four sites. We perform absolute photometric calibration and determine the image placement to obtain multiple 45-million-pixel mosaic images of the entire night sky. We also model the regional night sky conditions in and around the park based on 2016 VIIRS satellite data. The average zenith brightness is 21.5 mag/arcsec2, and the whole sky is only ~16% brighter than the natural conditions. The faintest stars visible to naked eyes have magnitude of approximately 7.0, reaching the sensitivity limit of human eyes. The main impacts to Chaco’s night sky quality are the light domes from Albuquerque, Rio Rancho, Farmington, Bloomfield, Gallup, Santa Fe, Grants, and Crown Point. A few of these light domes exceed the natural brightness of the Milky Way. Additionally, glare sources from oil and gas development sites are visible along the north and east horizons. Overall, the night sky quality at Chaco Culture National Historical Park is very good. The park preserves to a large extent the natural illumination cycles, providing a refuge for crepuscular and nocturnal species. During clear and dark nights, visitors have an opportunity to see the Milky Way from nearly horizon to horizon, complete constellations, and faint astronomical objects and natural sources of light such as the Andromeda Galaxy, zodiacal light, and airglow.

  9. Retrospective Study of Retention of Stainless Steel Crowns and Pre-veneered Crowns on Primary Anterior Teeth.

    Science.gov (United States)

    Lopez-Loverich, Angela M; Garcia, Maria Minerva; Donly, Kevin J

    2015-01-01

    The purpose of this retrospective chart review was to explore the retention of anterior pre-veneered stainless steel crowns (NuSmile) and conventional stainless steel crowns (3M ESPE) placed on primary anterior teeth. Records for children were reviewed over four years using the electronic record system axiUm. Data collected included child's age at time of crown placement, date of placement, tooth number, type of crown, patient behavior, treatment environment, provider type, crown presence, absence, and cementation success or failure at subsequent recall visits. A total of 637 anterior crowns in children treated with either or both crown types met this study's inclusion criteria. Of these crowns, 483 were NuSmile Signature crowns and 154 were stainless steel crowns. There was a nine percent failure rate for the NuSmile Signature crowns and a seven percent failure rate for the stainless steel crowns. There was no statistically significant difference in crown retention rates between the two groups (P<0.05). A full-coverage restoration that can follow the lifespan of the primary anterior dentition in high-risk children is needed. The results from this study indicate good crown retention rates for both crown types with no statistically significant difference between them (P<0.05).

  10. Melas Chasma, Day and Night.

    Science.gov (United States)

    2002-01-01

    This image is a mosaic of day and night infrared images of Melas Chasma taken by the camera system on NASA's Mars Odyssey spacecraft. The daytime temperature images are shown in black and white, superimposed on the martian topography. A single nighttime temperature image is superimposed in color. The daytime temperatures range from approximately -35 degrees Celsius (-31 degrees Fahrenheit) in black to -5 degrees Celsius (23 degrees Fahrenheit) in white. Overlapping landslides and individual layers in the walls of Melas Chasma can be seen in this image. The landslides flowed over 100 kilometers (62 miles) across the floor of Melas Chasma, producing deposits with ridges and grooves of alternating warm and cold materials that can still be seen. The temperature differences in the daytime images are due primarily to lighting effects, where sunlit slopes are warm (bright) and shadowed slopes are cool (dark). The nighttime temperature differences are due to differences in the abundance of rocky materials that retain their heat at night and stay relatively warm (red). Fine grained dust and sand (blue) cools off more rapidly at night. These images were acquired using the thermal infrared imaging system infrared Band 9, centered at 12.6 micrometers.Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the 2001 Mars Odyssey mission for NASA's Office of Space Science in Washington, D.C. Investigators at Arizona State University in Tempe, the University of Arizona in Tucson and NASA's Johnson Space Center, Houston, operate the science instruments. Additional science partners are located at the Russian Aviation and Space Agency and at Los Alamos National Laboratories, New Mexico. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL. Aviation and Space Agency and at Los Alamos National Laboratories

  11. Temporal trends of mercury and organohalogen contaminants in great blue heron eggs from the St. Lawrence River, Québec, Canada, 1991-2011, and relationships with tracers of feeding ecology.

    Science.gov (United States)

    Champoux, Louise; Boily, Monique

    2017-12-31

    Since 1991, great blue heron (Ardea herodias) eggs have been collected and analyzed for mercury (Hg), persistent organic contaminants (OCs), brominated and non-brominated flame retardants (FRs) as well as stable isotopes δ 13 C and δ 15 N. In the present study, temporal trends of contaminants were analyzed in eggs sampled in four regions along the St. Lawrence River (Quebec, Canada) and inland sites using new and previously published data. Most contaminants declined significantly over time in most regions. Globally, the highest annual change, -17.5%, was found for pp'-DDD, while the smallest annual decline, -0.54%, was observed for Hg. Concentrations of ΣDDT and ΣFR 8 (sum of 8 congeners) decreased by -11.6% and -7.3%, respectively. Declines in ΣPCBs differed among regions, from -5.6% in the fluvial section to -14.7% in the inland region. The highest concentration of ΣFR 8 was measured in eggs from Grande Ile in the fluvial section of the river in 1996 (2.39μg/g). Stable isotope ratios also showed temporal trends in some regions: δ 13 C decreased in the fluvial section and increased in Gulf region, while δ 15 N decreased in the fluvial section and increased in the upper estuary. Significant positive relationships were found between ΣDDT, ΣPCBs and ΣFRs and δ 15 N and δ 13 C in freshwater colonies, but not in estuarine or marine colonies. These results suggest that changes in trophic level and foraging areas over time were influential factors with respect to contaminant burden in great blue heron eggs in the fluvial section, but not in the other regions. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  12. Assessment of crown angulations, crown inclinations, and tooth size discrepancies in a South Indian population

    Directory of Open Access Journals (Sweden)

    Geeta Maruti Doodamani

    2011-01-01

    Full Text Available Aims and Objective: The aim of this study was to assess crown angulations, crown inclinations, and tooth size discrepancy in a sample population from Davangere, South India. Materials and Methods: One hundred adults (50 male and 50 female of age 18-30 years, with Angle′s class I ideal occlusion and balanced profiles, were selected for the study. Study models were prepared and crown angulations and crown inclinations were measured using a customized protractor device. Bolton′s analysis was used to measure the tooth size discrepancies. Results: Maxillary and mandibular teeth had less crown angulations. Maxillary and mandibular incisors and maxillary molars showed increased crown inclinations, whereas mandibular molars and premolars had less crown inclinations than the original Andrews sample. The mean maxillary and mandibular tooth size ratios, overall and anterior, were similar to Bolton′s ratios. Conclusions: The finding of this study indicates that there are possible racial and ethnic factors contributing to variations in crown angulations and crown inclinations.

  13. Hard Day’s Night: A Retrospective on the American Intervention in Somalia

    Science.gov (United States)

    2009-01-01

    weapons storage areas, a Pakistani unit was badly mauled. In a lengthy firefight, Aideed’s militia killed 23 and wounded 59. UNOSOM II’s Malaysian ...Regiment (SOAR), equipped with MH60 Black Hawk utility helicopters and MH6 and AH6 “Little Bird ” light helicopters. Small numbers of communicators...Americans through the night. By most accounts, only the dauntless actions of the AH6 Little Bird pilots, flying all night long, kept the besieged

  14. Does the Sun appear brighter at night in neutrinos?

    International Nuclear Information System (INIS)

    Bahcall, J.N.; Krastev, P.I.

    1997-01-01

    We calculate accurately the number of solar neutrino events expected as a function of solar zenith angle, with and without neutrino oscillations, for detectors at the locations of Super-Kamiokande, SNO, and the Gran Sasso National Laboratory. Using different Earth models to estimate geophysical uncertainties, and different solar models to estimate solar uncertainties, we evaluate distortions predicted by the Mikheyev-Smirnov-Wolfenstein (MSW) effect in the zenith angle distributions of solar neutrino events. The distortions are caused by oscillations and by ν-e interactions in the Earth that regenerate ν e from ν μ or ν τ . We show that the first two moments of the zenith-angle distribution are more sensitive to the small mixing angle MSW solution than the conventionally studied day-night asymmetry. We present iso-σ contours that illustrate the potential of Super-Kamiokande, SNO, BOREXINO, ICARUS, and HERON/HELLAZ for detecting the Earth regeneration effect at their actual locations (and at the equator). MSW solutions favored by the four pioneering solar neutrino experiments predict characteristic distortions for Super-Kamiokande, SNO, BOREXINO, and ICARUS that range from being unmeasurably small to >5σ (stat) after only a few years of observations. copyright 1997 The American Physical Society

  15. Actinide/crown ether chemistry

    International Nuclear Information System (INIS)

    Benning, M.M.

    1988-01-01

    A structural survey of actinide/crown ether compounds was conducted in order to investigate the solid state chemistry of these complexes. Several parameters - the metal size, crown type, counterion, solvent systems and reaction and crystallization conditions - were varied to correlate their importance in complexation. Under atmospheric conditions, two types of complexes were isolated, those containing only hydrogen-bonded crown interactions and instances where the crown interacts directly with the metal center. In both cases, water seems to play a very important role. When coordinated to the metal, water molecules exhibit the necessary donor properties required for the formation of hydrogen-bonded contacts. The water molecules also provide fierce competition with the crown ethers for metal-binding sites and in most cases prohibit the formation of complexes in which direct metal-ligand association exists. The results of this study indicate that direct interaction between the metal atoms and the crown ethers, in the presence of water, can only occur with polyether conformations which limit the steric replusions within the metal coordination sphere

  16. Contemporary permanent tooth dimensions, with comparisons to G.V. Black's data.

    Science.gov (United States)

    Harris, Edward F; Burris, Benjamin G

    2003-01-01

    The tooth dimensions most commonly cited in the dental literature are those published by the famous restorative dentist G. V. Black late in the 19th century. We report here on the crown dimensions of a large series of contemporary North American Whites and show that Black's values differ significantly from modern values, but not in any consistent or predictable fashion. Black supplied no information about the nature of his sample. We suggest that it may be time to replace Black's data with modern tooth size standards.

  17. Third Culture Kid's Effect on Character of Cady Heron in Mean Girls

    OpenAIRE

    Hapsari, Laily

    2017-01-01

    This thesis focuses on the movie, Mean Girls, specifically one of the character, Cady Heron,as a Third Culture Kid trying to adapt in new society. The purpose of this study is to understand the effect of Third Culture Kid in the movie character in socializing with the new surroundings and explain the way how one of the characters in Mean Girls adapts to the new surroundings.The writer uses library research to collect the data with the novel as the main data, and several relevant books, journa...

  18. Prey diversity for Three Species Herons in Pulau Dua Nature Reserve Serang Distrik, Banten Province

    Directory of Open Access Journals (Sweden)

    DEWI ELFIDASARI

    2006-10-01

    Full Text Available The diversity of prey consumed by three species herons (Casmerodius albus, Egretta garzetta and Bubulcus ibis was studied in Pulau Dua Nature Reserve Serang, Banten Province using video tapes by following a focal individual for five minutes. In the laboratory the film was analysed every minutes to select complete sequences of feeding behavior in foraging site. There were differences on diversity and size of prey that consumed by three species herons among the different feeding locations. Casmerodius albus which was feeding on mudflat and fisheries consumed Chanos chanos (15.6%, Oreochromis sp (9.4% and Periophtalmus sp. (7.3%, and 36.5% couldn’t be identified. Egretta garzetta was feeding on mudflat, fisheries and rice-field, consumed Periophtalmus sp (15.4%, Mugil dussumeieri (7.9%, Chanos chanos (4.7%, Oreochromis sp (0.5%, including small frog and crustacean (0.5%. Bubulcus ibis was feeding on rice-field and grassland, consumed many variety of insects (92 % and many variety of snail (1.9% in their diet. The insects that B. ibis consumed including grasshopper (26.8%, caterpillar (0.9% and other invertebrates (worm, crustacean that could not be identified (64.3%.

  19. Blood biomarkers and contaminant levels in feathers and eggs to assess environmental hazards in heron nestlings from impacted sites in Ebro basin (NE Spain).

    Science.gov (United States)

    Barata, C; Fabregat, M C; Cotín, J; Huertas, D; Solé, M; Quirós, L; Sanpera, C; Jover, L; Ruiz, X; Grimalt, J O; Piña, B

    2010-03-01

    Blood biomarkers and levels of major pollutants in eggs and feathers were used to determine pollution effects in nestlings of the Purple Heron Ardea purpurea and the Little Egret Egretta garzetta, sampled on three Ebro River (NE Spain) areas: a reference site, a site affected by the effluents of a chlor-alkali industry and the river Delta. The two impacted heron populations showed mutually different pollutant and response patterns, suggesting different sources of contamination. In the population nesting near the chlor-alkali plant, elevated levels of hexachlorobenzene (HCB) and polychlorobiphenyls (PCBs) in eggs, and mercury in feathers in A. purpurea chicks were related with reduced blood antioxidant defenses and increased levels of micronuclei. In Ebro Delta, high levels of plasmatic lactate dehydrogenase in A. purpurea chicks and high frequency of micronuclei in blood of both species were tentatively associated with intensive agricultural activities taking place in the area. These results provide the first evidence of a biological response in heron chicks to the release of pollutants at a chlor-alkali plant. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  20. Model of the PCB and mercury exposure of mink and great blue heron inhabiting the off-site environment downstream from the US Department of Energy Oak Ridge Reservation

    International Nuclear Information System (INIS)

    MacIntosh, D.L.

    1992-09-01

    This report presents a pair of wildlife exposure models developed for use in investigating the risks to wildlife of releases of mercury and PCBS. The species modeled are the great blue heron and mink The models may be used to estimate the exposure experienced by mink and herons, to help establish remedial action goals and to identify research needs. Because mercury and PCBs bioaccumulate through dietary uptake, the models simulate the food webs supporting the two species. Sources of contaminants include surface water, sediment, sediment pore water, and soil. The model are stochastic equilibrium models. Two types of variance in the input parameters are distinguished: stochastic variance among individual mink and herons and ignorance concerning true parameter values. The variance in the output due to stochastic parameters indicates the expected variance among the receptors. The variance due to ignorance indicates the extent to which the model outputs could be unpaved by additional sampling and measurement. The results of the models were compared to concentrations measured in great blue heron eggs and nestlings from colonies on the Clinch and Tennessee Rivers. The predicted concentrations agreed well with the measured concentrations. In addition, the variances in measured values among individuals was approximately equal to the total stochastic variance predicted by the models

  1. Model of the PCB and mercury exposure of mink and great blue heron inhabiting the off-site environment downstream from the US Department of Energy Oak Ridge Reservation

    Energy Technology Data Exchange (ETDEWEB)

    MacIntosh, D.L. (Indiana Univ., Bloomington, IN (United States). School of Public and Environmental Affairs); Suter, G.W. II; Hoffman, F.O. (Oak Ridge National Lab., TN (United States))

    1992-09-01

    This report presents a pair of wildlife exposure models developed for use in investigating the risks to wildlife of releases of mercury and PCBS. The species modeled are the great blue heron and mink The models may be used to estimate the exposure experienced by mink and herons, to help establish remedial action goals and to identify research needs. Because mercury and PCBs bioaccumulate through dietary uptake, the models simulate the food webs supporting the two species. Sources of contaminants include surface water, sediment, sediment pore water, and soil. The model are stochastic equilibrium models. Two types of variance in the input parameters are distinguished: stochastic variance among individual mink and herons and ignorance concerning true parameter values. The variance in the output due to stochastic parameters indicates the expected variance among the receptors. The variance due to ignorance indicates the extent to which the model outputs could be unpaved by additional sampling and measurement. The results of the models were compared to concentrations measured in great blue heron eggs and nestlings from colonies on the Clinch and Tennessee Rivers. The predicted concentrations agreed well with the measured concentrations. In addition, the variances in measured values among individuals was approximately equal to the total stochastic variance predicted by the models.

  2. Fracture-resistant monolithic dental crowns.

    Science.gov (United States)

    Zhang, Yu; Mai, Zhisong; Barani, Amir; Bush, Mark; Lawn, Brian

    2016-03-01

    To quantify the splitting resistance of monolithic zirconia, lithium disilicate and nanoparticle-composite dental crowns. Fracture experiments were conducted on anatomically-correct monolithic crown structures cemented to standard dental composite dies, by axial loading of a hard sphere placed between the cusps. The structures were observed in situ during fracture testing, and critical loads to split the structures were measured. Extended finite element modeling (XFEM), with provision for step-by-step extension of embedded cracks, was employed to simulate full failure evolution. Experimental measurements and XFEM predictions were self-consistent within data scatter. In conjunction with a fracture mechanics equation for critical splitting load, the data were used to predict load-sustaining capacity for crowns on actual dentin substrates and for loading with a sphere of different size. Stages of crack propagation within the crown and support substrate were quantified. Zirconia crowns showed the highest fracture loads, lithium disilicate intermediate, and dental nanocomposite lowest. Dental nanocomposite crowns have comparable fracture resistance to natural enamel. The results confirm that monolithic crowns are able to sustain high bite forces. The analysis indicates what material and geometrical properties are important in optimizing crown performance and longevity. Copyright © 2015 Academy of Dental Materials. All rights reserved.

  3. Biodiversity assessment at Department of Atomic Energy (DAE) campus, Kalpakkam

    International Nuclear Information System (INIS)

    Jahir Hussain, K.; Satpathy, K.K.; Prasad, M.V.R.; Ramesh, T.; Selvanayagam, M.

    2008-01-01

    A rapid assessment of biodiversity in the DAE campus, Kalpakkam was carried out. The entire DAE campus of 3000 acres, at Kalpakkam was divided into four representative plots comprising of different landscapes namely (1) undisturbed area with dense vegetation, (2) building area, (3) water bodies with riparian cover and (4) sandy area with meager vegetation for inventorying of charismatic terrestrial/semi-aquatic fauna viz., Mammals, Birds, Reptiles, Amphibians and Butterflies. For birds, early morning surveys were made whereas for mammals evening and night surveys were followed. Midday sampling was followed for butterflies and other animals. Each plot was surveyed twice in a week over a period of one year (April 07' to March 08'). Totally 128 species of animals were identified during the survey and it has highlighted the potential of biodiversity in the campus. The diversity of butterflies is remarkable. Twenty-two butterfly species were encountered. Frogs, toads, lizards and snakes are also diverse. Five species of frogs and one species of toad were recorded. Lizards are more diverse than snakes. Nine species of lizards were encountered. Calotus versicolor is abundant followed by common skink. Totally five species of snakes were recorded. Among them Common bronzedback and Green Vine Snake were predominant. Seventy species of birds were recorded during the survey period. Black crowned night heron, Common house crow, Great cormorant, Oriental white ibis, Painted stork, Cattle egret, Common mynah are more common. Sixteen species of mammals were encountered during the survey. Wild cattle, Jackal, Jungle cat, Toddy cat, Crested porcupine and Indian civet are the major wildlife found. Indian civet and Crested porcupine are elusive animals that are diminishing from wild and their presence at this campus is an indication of less human intervention. (author)

  4. Redescription of Chabaudacuaria multispinosa (Pérez Vigueras, 1938) n. g., n. comb. (Nematoda: Spirurida: Acuariidae) based on specimens from Ardea herodias L. and Nyctanassa violacea (L.) (Ardeidae) in Florida.

    Science.gov (United States)

    Mutafchiev, Yasen; Kinsella, John M

    2012-10-01

    Chabaudacuaria n. g. is erected, as monotypic, for C. multispinosa (Pérez Vigueras, 1938) n. comb. (Spirurida: Acuariidae) [syns Cheilospirura multispinosa Pérez Vigueras, 1938; Acuaria multispinosa (Pérez Vigueras, 1938) Yamaguti, 1961]. This species, a parasite of various ardeid birds, is redescribed by means of light and scanning electron microscopy based on material from great blue herons Ardea herodias L. and yellow-crowned night herons Nyctanassa violacea (L.) in Florida, USA. Chabaudacuaria n. g. resembles Acuaria Bremser, 1811, Cheilospirura Diesing, 1861, Skrjabinocerca Schikhobalova, 1930 and Xenocordon Mawson, 1982 in its straight cordons which do not anastomose. However, it can be distinguished from them by the didelphic-prodelphic uterus and the absence of caudal alae in the males. In the pattern of its cordons (consisting of a row of plates and a longitudinal ridge) and the absence of an area rugosa, the new genus is similar to Chevreuxia Seurat, 1918, Syncuaria Gil'bert, 1927, Aviculariella Wehr, 1931, Skrjabinocara Kurashvili, 1940, Decorataria Sobolev, 1949 and Desportesius Chabaud & Campana, 1949, which are characterised by anastomosing cordons. The didelphic-prodelphic female reproductive system of Chabaudacuaria is intermediate between the didelphic-amphidelphic uterus of Chevreuxia and the monodelphic-prodelphic uterus of Syncuaria, Aviculariella, Skrjabinocara, Desportesius and Decorataria. Therefore, the straight and non-anastomosing cordons are considered to be autapomorphic for Chabaudacuaria.

  5. Crop-tree release increases growth of 12-year-old yellow-poplar and black cherry

    Science.gov (United States)

    Neil I. Lamson; H. Clay. Smith; H. Clay. Smith

    1989-01-01

    Precommercial thinning was done in a 12-year-old Appalachian hardwood sapling stand in West Virginia. Two crop-tree release techniques were used--crown touching and crown touching plus 5 feet. Results indicated that both treatments significantly increased 5-year d.b.h. growth for released yellow-poplar and black cherry crop trees. Although there was a major increase in...

  6. Effect of Cultural Practices in Night on Weed Density and Weed Dry Matter

    Directory of Open Access Journals (Sweden)

    M.H Rashed Mohasel

    2011-01-01

    Full Text Available Abstract In order to evaluate the response of weed seeds to light, two experiments, at two different locations were conducted at Ferdowsi university of Mashhad in 2009. At the first experiment, field was ploughed in day and night. Weed density was evaluated 70 d after plough, with 1×1 quadrate. At the second experiment, at night treatment, ploughing, potato planting and weeding with cultivator were done at night. Weed sampling was done twice at 43 and 130 days after planting with 1×1 quadrate and weeds were identified and counted. Result showed pigweed (Amaranthus retroflexus L., sowthistle (Sonchus oleraceus L., crabgrass (Digitaria sanguinalis (L. scop, jimsonweed (Datura stramonium L. and mallow (Hibiscus trionum L. did not observed at night plough, in contrast, night plough has no significance influence on common lambsquarters (Chenopodium album L., and black nightshade (Solanum nigrum L.. Only common lambsquarters had similar appearance in two treatments, indicating insusceptibility of this weed to time of plough. Interestingly, at the second experiment, result was very similar. Potato yield was higher at night treatment, but not significant. This research showed that some cultural practice like plough, planting and weeding with cultivator in night can reduce weed density and weed dry matter. Keywords: Germination, Time of plough, Sustainable weeds management, Light

  7. Black or white? Physiological implications of roost colour and choice in a microbat.

    Science.gov (United States)

    Doty, Anna C; Stawski, Clare; Currie, Shannon E; Geiser, Fritz

    2016-08-01

    Although roost choice in bats has been studied previously, little is known about how opposing roost colours affect the expression of torpor quantitatively. We quantified roost selection and thermoregulation in a captive Australian insectivorous bat, Nyctophilus gouldi (n=12) in winter when roosting in black and white coloured boxes using temperature-telemetry. We quantified how roost choice influences torpor expression when food was provided ad libitum or restricted in bats housed together in an outdoor aviary exposed to natural fluctuations of ambient temperature. Black box temperatures averaged 5.1°C (maximum 7.5°C) warmer than white boxes at their maximum daytime temperature. Bats fed ad libitum chose black boxes on most nights (92.9%) and on 100% of nights when food-restricted. All bats used torpor on all study days. However, bats fed ad libitum and roosting in black boxes used shorter torpor and spent more time normothermic/active at night than food-restricted bats and bats roosting in white boxes. Bats roosting in black boxes also rewarmed passively more often and to a higher skin temperature than those in white boxes. Our study suggests that N. gouldi fed ad libitum select warmer roosts in order to passively rewarm to a higher skin temperature and thus save energy required for active midday rewarming as well as to maintain a normothermic body temperature for longer periods at night. This study shows that colour should be considered when deploying bat boxes; black boxes are preferable for those bats that use passive rewarming, even in winter when food availability is reduced. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Reproductive success and chlorinated hydrocarbon contamination of resident great blue herons (Ardea herodias) from coastal British Columbia, Canada, 1977 to 2000

    International Nuclear Information System (INIS)

    Harris, M.L.; Elliott, J.E.; Butler, R.W.; Wilson, L.K.

    2003-01-01

    Human disturbance and loss of nesting habitat were more important factors than chlorinated hydrocarbons in changing heron reproductive success. - Over the period 1977-2000, eggs of Pacific great blue heron (Ardea herodias fannini) were collected from 23 colonies along the southern coast of British Columbia, Canada, and analyzed for persistent organochlorine (OC) pesticides and polychlorinated biphenyls (PCBs). Concentrations of OC pesticides in eggs declined sharply in the late 1970s, after which there were minimal changes. The sums of PCB congeners were not reduced appreciably during the 1980s and 1990s, but Aroclor 1260 concentrations suggested a sharp decline in PCB contamination of eggs in the late 1970s, similar to that shown for OC pesticides. Eggs collected along or near the Fraser River delta showed higher levels of most pesticides compared to other monitored colonies. Although the delta lands support a long-standing agricultural economy, the primary factors influencing OC levels in the delta colonies were thought to be driven by estuarine processes. We suggest two possible influencing factors were: 1) a greater rate of bioaccumulation in the estuary due to the deposition of particulates collected over a vast area encompassed by the Fraser River watershed; or 2) a higher rate of biomagnification in the estuary due to species differences at lower trophic levels of the heron food chain. Eggs from urban colonies contained higher levels of PCBs. The congener pattern was not clearly different from that observed in less contaminated eggs from rural and pulp mill-influenced colonies, except that colonies in Vancouver had greater proportions of PCB-66, suggesting a local source of Aroclor 1242. Productivity in the coastal heron colonies was highly variable over the period of study, with 71% of recorded colony-wide reproductive failures occurring in colonies near pulp mills. However, the predominant factors influencing reproductive success were probably disturbance

  9. Overdenture dengan Pegangan Telescopic Crown

    Directory of Open Access Journals (Sweden)

    Pambudi Santoso

    2014-06-01

    Full Text Available Kaitan presisi merupakan alat retensi mekanis yang menghubungkan antara satu atau lebih pegangan gigi tiruan, yang bertujuan untuk menambah retensi dan/atau stabilisasi. Kaitan presisi dapat digunakan secara luas pada gigi tiruan cekat, gigi tiruan sebagian lepasan, overdenture, implant untuk retensi overdenture, dan protesa maksilo fasial. Overdenture dengan kaitan presisi dapat membantu dalam pembagian beban kunyah, meminimalkan trauma pada gigi pegangan dan jaringan lunak, meminimalkan resorbsi tulang, dan meningkatkan estetik dan pengucapan suara. Salah satu jenis dari kaitan presisi adalah telescopic crown, terdiri dari 2 macam mahkota, yaitu mahkota primer yang melekat secara permanen pada gigi penyangga, dan mahkota sekunder yang melekat pada gigi tiruan. Tujuan pemaparan kasus ini adalah untuk memberikan informasi tentang rehabilitasi pasien edentulous sebagian rahang atas dengan telescopic crown..  Pasien wanita berusia 45 tahun datang ke klinik prostodonsia RSGM Prof.Soedomo dengan keluhan ingin dibuatkan gigi tiruan. Pasien kehilangan gigi 11 12 15 16 17 21 22 24 25 26 dan 27 yang diindikasikan untuk pembuatan overdenture gigi tiruan sebagian lepasan (GTS kerangka logam dengan pegangan telescopic crown pada gigi 13 dan 14 dengan sistem parallel-sided crown. Tahap-tahap pembuatan telescopic crown yaitu mencetak model study dengan catatan gigit pendahuluan. Perawatan saluran dilakukan pada akar gigi 13, dilanjutkan pemasangan pasak fiber serta rewalling dinding bukal. Gigi 13 dan 14 dilakukan preparasi mahkota penuh, dilanjutkan dengan pencetakan model kerja untuk coping primer dan kerangka logam dengan metode double impression. Coping primer disementasi pada gigi penyangga, dilanjutkan pasang coba coping sekunder beserta kerangka logam. Selanjutnya dilakukan pencatatan gigit, pencetakan model kerja, penyusunan gigi dan pasang coba penyusunan gigi pada pasien. Prosedur dilanjutkan dengan proses di laboratorium, serta insersi pada

  10. An investigation of crown fuel bulk density effects on the dynamics of crown fire initiation in shrublands

    Science.gov (United States)

    Watcharapong Tachajapong; Jesse Lozano; Shankar Mahalingam; Xiangyang Zhou; David R. Weise

    2008-01-01

    Crown fire initiation is studied by using a simple experimental and detailed physical modeling based on Large Eddy Simulation (LES). Experiments conducted thus far reveal that crown fuel ignition via surface fire occurs when the crown base is within the continuous flame region and does not occur when the crown base is located in the hot plume gas region of the surface...

  11. [Comparison of the clinical effects of selective laser melting deposition basal crowns and cobalt chromium alloy base crowns].

    Science.gov (United States)

    Li, Jing-min; Wang, Wei-qian; Ma, Jing-yuan

    2014-06-01

    To evaluate the clinical effects of selective laser melting (SLM) deposition basal crowns and cobalt chromium alloy casting base crowns. One hundred and sixty eight patients treated with either SLM deposition basal crowns (110 teeth) or cobalt chromium alloy casting basal crowns (110 teeth) were followed-up for 1 month, 6 months, 12 months and 24 months. The revised standard of American Public Health Association was used to evaluate the clinical effect of restoration, including the color of porcelain crowns, gingival inflammation, gingival margin discoloration, and crack or fracture. Data analysis was conducted with SPSS 20 software package for Student's t test and Chi-square test. Six cases were lost to follow-up. The patients who were treated with SLM deposition basal crowns (104 teeth) and cobalt chromium alloy casting base crowns (101 teeth) completed the study. Patients were more satisfied with SLM deposition cobalt chromium alloy porcelain crowns. There was 1 prosthesis with poor marginal fit after 24 months of restoration in SLM crowns. There were 6 prostheses with edge coloring and 8 with poor marginal fit in cobalt chromium alloy casting base crowns, which was significantly different between the 2 groups(P<0.05). The SLM deposition copings results in smaller edge coloring and better marginal fit than those of cobalt-chrome copings. Patients are pleased with short-term clinical results.

  12. Agricultural Crown Land in Saskatchewan

    International Nuclear Information System (INIS)

    Pyle, W.E.

    1998-01-01

    The petroleum industry's interest in provincial crown land in the agricultural area of Saskatchewan has grown over the last two decades. Agricultural land is regulated by the Saskatchewan Department of Agriculture and Food, Lands Branch. Since 1974 surface lease contracts by oil and gas companies have increased from 1,400 to the present 3,700. Resource lands are regulated by Saskatchewan Environment and Resource Management. There are 8.8 million acres of crown agricultural land in Saskatchewan, most of which is held without title. Crown land management is meant to provide a long term management approach to crown lands that balances economic, environmental and social benefits for present and future generations. The oil and gas industry is an important participant in crown land management. Revenues from petroleum and gas surface leasing, and seismic licensing totals more than five million dollars annually. In 1995/96, there were 54 companies establishing new oil and gas leases on crown land in Saskatchewan. This paper provides details of current policies which apply to petroleum and gas leasing and seismic exploration, and environmental guidelines for companies developing well sites, compressor and metering stations, access roads and easements. 3 tabs

  13. Crown rust control on oats

    International Nuclear Information System (INIS)

    Frey, K.J.; Browning, J.A.; Simons, M.D.

    1976-01-01

    Attempts have been made to test the relative effectiveness of EMS treatment for inducing tolerance to crown rust among oat strains Clintland-60 of different ploidy levels. One strain of diploid and one of tetraploid oats were treated with EMS. These two strains are as susceptible to damage from crown rust as are cultivars of hexaploid oats. Multiline cultivars of oats have been shown to provide adequate protection from economic loss due to crown-rust disease in Iowa. Since 1968, eleven multiline cultivars of oats have been released from the Iowa station for use in commercial production in the midwestern USA. During the past two winter seasons, the effectiveness of multiline oat cultivars against crown-rust disease has been researched in Texas, USA, which has a ''long rust season'' of about four months, not an Iowa ''short rust season''. The protection against crown rust afforded by the multiline cultivars appeared equally good in Texas and Iowa. The seasonal productions of crown-rust spores relative to completely resistant and susceptible checks were nearly identical in both environments. Fifteen new isolines of oats have been developed for use in multiline varieties, with seed supplies sufficiently large for immediate use

  14. Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown.

    Science.gov (United States)

    Ji, Min-Kyung; Park, Ji-Hee; Park, Sang-Won; Yun, Kwi-Dug; Oh, Gye-Jeong; Lim, Hyun-Pil

    2015-08-01

    This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau®Zirconia and ZENOSTAR®ZR translucent) and lithium disilicate glass ceramic (IPS e.max®press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max®press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau®Zirconia) (Pmarginal discrepancy (Pmarginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau®Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR®ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau®Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max®press) had overextended margins.

  15. Host reproductive phenology drives seasonal patterns of host use in mosquitoes.

    Directory of Open Access Journals (Sweden)

    Nathan D Burkett-Cadena

    2011-03-01

    Full Text Available Seasonal shifts in host use by mosquitoes from birds to mammals drive the timing and intensity of annual epidemics of mosquito-borne viruses, such as West Nile virus, in North America. The biological mechanism underlying these shifts has been a matter of debate, with hypotheses falling into two camps: (1 the shift is driven by changes in host abundance, or (2 the shift is driven by seasonal changes in the foraging behavior of mosquitoes. Here we explored the idea that seasonal changes in host use by mosquitoes are driven by temporal patterns of host reproduction. We investigated the relationship between seasonal patterns of host use by mosquitoes and host reproductive phenology by examining a seven-year dataset of blood meal identifications from a site in Tuskegee National Forest, Alabama USA and data on reproduction from the most commonly utilized endothermic (white-tailed deer, great blue heron, yellow-crowned night heron and ectothermic (frogs hosts. Our analysis revealed that feeding on each host peaked during periods of reproductive activity. Specifically, mosquitoes utilized herons in the spring and early summer, during periods of peak nest occupancy, whereas deer were fed upon most during the late summer and fall, the period corresponding to the peak in births for deer. For frogs, however, feeding on early- and late-season breeders paralleled peaks in male vocalization. We demonstrate for the first time that seasonal patterns of host use by mosquitoes track the reproductive phenology of the hosts. Peaks in relative mosquito feeding on each host during reproductive phases are likely the result of increased tolerance and decreased vigilance to attacking mosquitoes by nestlings and brooding adults (avian hosts, quiescent young (avian and mammalian hosts, and mate-seeking males (frogs.

  16. Model of the PCB and mercury exposure of mink and great blue heron inhabiting the off-site environment downstream from the US Department of Energy Oak Ridge Reservation. Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    MacIntosh, D.L. [Indiana Univ., Bloomington, IN (United States). School of Public and Environmental Affairs; Suter, G.W. II; Hoffman, F.O. [Oak Ridge National Lab., TN (United States)

    1992-09-01

    This report presents a pair of wildlife exposure models developed for use in investigating the risks to wildlife of releases of mercury and PCBS. The species modeled are the great blue heron and mink The models may be used to estimate the exposure experienced by mink and herons, to help establish remedial action goals and to identify research needs. Because mercury and PCBs bioaccumulate through dietary uptake, the models simulate the food webs supporting the two species. Sources of contaminants include surface water, sediment, sediment pore water, and soil. The model are stochastic equilibrium models. Two types of variance in the input parameters are distinguished: stochastic variance among individual mink and herons and ignorance concerning true parameter values. The variance in the output due to stochastic parameters indicates the expected variance among the receptors. The variance due to ignorance indicates the extent to which the model outputs could be unpaved by additional sampling and measurement. The results of the models were compared to concentrations measured in great blue heron eggs and nestlings from colonies on the Clinch and Tennessee Rivers. The predicted concentrations agreed well with the measured concentrations. In addition, the variances in measured values among individuals was approximately equal to the total stochastic variance predicted by the models.

  17. The Identification of Military Installations as Important Migratory Bird Stopover Sites and the Development of Bird Migration Forecast Models: A Radar Ornithology Approach

    Science.gov (United States)

    2012-08-01

    civilian and military flights. Since 1985, nearly 38,000 bird-military aircraft collisions have been reported. These collisions have killed 33 pilots...stations in the contiguous United States. Edges of the circles are at 124 nautical mile range (230 km). and 2004, approximately 194 people were killed ... Mockingbird Wilson’s Snipe Pileated Woodpecker American Wigeon Red-bellied Woodpecker American Coot Red-cockaded Woodpecker Black-crowned Night

  18. Urban Crowns: crown analysis software to assist in quantifying urban tree benefits

    Science.gov (United States)

    Matthew F. Winn; Sang-Mook Lee Bradley; Philip A. Araman

    2010-01-01

    UrbanCrowns is a Microsoft® Windows®-based computer program developed by the U.S. Forest Service Southern Research Station. The software assists urban forestry professionals, arborists, and community volunteers in assessing and monitoring the crown characteristics of urban trees (both deciduous and coniferous) using a single side-view digital photograph. Program output...

  19. Spatiotemporal patterns of coral disease prevalence on Heron Island, Great Barrier Reef, Australia

    Science.gov (United States)

    Haapkylä, J.; Melbourne-Thomas, J.; Flavell, M.; Willis, B. L.

    2010-12-01

    Despite increasing research effort on coral diseases, little is known about factors driving disease dynamics on the Great Barrier Reef (GBR). This is the first study to investigate the temporal patterns of coral disease prevalence and potential drivers of disease around Heron Island, in the southern Capricorn Bunker sector of the GBR. Surveys were conducted in two austral summers and three winters between November 2007 and August 2009 on six sites around the island. Six diseases were detected: brown band syndrome (BrB), growth anomalies (GA), ulcerative white spots (UWS), white syndrome (WS), skeletal eroding band disease (SEB) and black band disease (BBD). The lowest overall mean disease prevalence was 1.87 ± 0.75% (mean ± SE) in November 2007 and the highest 4.22 ± 1.72% in August 2008. There was evidence of seasonality for two diseases: BrB and UWS. This is the first study to report a higher prevalence of BrB in the winter. BrB had a prevalence of 3.29 ± 0.58% in August 2008 and 1.53 ± 0.28% in August 2009, while UWS was the most common syndrome in the summer with a prevalence of 1.12 ± 0.31% in November 2007 and 2.67 ± 0.52% prevalence in January 2008. The prevalence of GAs and SEB did not depend on the season, although the prevalence of GAs increased throughout the study period. WS had a slightly higher prevalence in the summer, but its overall prevalence was low (disease prevalence (12% of Acropora and 3.3% of Montipora species were diseased respectively). These results highlight the correlations between coral disease prevalence, seasonally varying environmental parameters and coral community composition. Given that diseases are likely to reduce the resilience of corals, seasonal patterns in disease prevalence deserve further research.

  20. PEEK Primary Crowns with Cobalt-Chromium, Zirconia and Galvanic Secondary Crowns with Different Tapers—A Comparison of Retention Forces

    Directory of Open Access Journals (Sweden)

    Veronika Stock

    2016-03-01

    Full Text Available In prosthetic dentistry, double crown systems have proved their suitability as retainers for removable partial dentures. However, investigations in this context, regarding polyetheretherketone, are scarce. Therefore, the aim of this study was to test the retention force (RF between polyetheretherketone (PEEK primary and cobalt-chromium (CoCr, zirconia (ZrO2 and galvanic (GAL secondary crowns with three different tapers. Primary PEEK-crowns were milled with the tapers 0°, 1°, and 2° (n = 10/taper, respectively. Afterwards, 90 secondary crowns were fabricated: (i 30 CoCr-crowns milled from Ceramill Sintron (AmannGirrbach, Koblach, Austria (n = 10/taper, (ii 30 ZrO2-crowns milled from Ceramill ZI (AmannGirrbach, Koblach, Austria (n = 10/taper, and (iii 30 GAL-crowns made using electroforming (n = 10/taper. RF was measured in a pull-off test (20 pull-offs/specimen and data were analyzed using 2-/1-way Analysis of Variance (ANOVA followed by the Tukey-Honestly Significant Difference (HSD post hoc test and linear regression analyses (p < 0.05. The measured mean RF values ranged between 9.6 and 38.2 N. With regard to the 0°, 1°, and 2° tapered crowns, no statistically significant differences between CoCr and ZrO2 were observed (p > 0.141. At 0° taper, no differences in retention forces between GAL, CrCr, and ZrO2 crowns were found (p = 0.075. However, at 1° and 2° taper, lower RF for GAL-crowns were observed (p < 0.009, p < 0.001, respectively. According to this laboratory study, PEEK might be a suitable material for primary crowns, regardless of the taper and the material of secondary crown. Long-term results, however, are still necessary.

  1. All-ceramic crowns: bonding or cementing?

    Science.gov (United States)

    Pospiech, Peter

    2002-12-01

    Despite the wide variety of all-ceramic systems available today, the majority of dental practitioners hesitate to recommend and insert all-ceramic crowns. This article regards the nature of the ceramic materials, the principles of bonding and adhesion, and the clinical problems of the acid-etch technique for crowns. Advantages and disadvantages are discussed, and the influences of different factors on the strength of all-ceramic crowns are presented. Finally, the conclusion is drawn that conventional cementing of all-ceramic crowns is possible when the specific properties of the ceramics are taken into consideration.

  2. Digital photo monitoring for tree crown

    Science.gov (United States)

    Neil Clark; Sang-Mook Lee

    2007-01-01

    Assessing change in the amount of foliage within a tree’s crown is the goal of crown transparency estimation, a component in many forest health assessment programs. Many sources of variability limit analysis and interpretation of crown condition data. Increased precision is needed to detect more subtle changes that are important for detection of health problems....

  3. Dentin-bonded all-ceramic crowns: current status.

    Science.gov (United States)

    Burke, F J; Qualtrough, A J; Hale, R W

    1998-04-01

    Dentin-bonded all-ceramic crowns employ contemporary techniques to lute the crown to the tooth using a resin luting material and dentin-bonding system. The advantages of these crowns are that they provide good esthetics and fracture resistance and can be used in cases of substantial tooth loss. Their principal disadvantages are that the luting procedure is more time-consuming and that these crowns should not be used where margins are subgingival. Dentin-bonded all-ceramic crowns may be a useful addition to the dentist's armamentarium, but long-term clinical studies are needed to fully assess their performance.

  4. Pericoronal radiolucency associated with incomplete crown

    Energy Technology Data Exchange (ETDEWEB)

    Nah, Kyung Soo [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Yangsan (Korea, Republic of)

    2013-12-15

    The author experienced 8 cases of pericoronal radiolucency involving an incomplete tooth crown that had not developed to form the cemento-enamel junction, and the underdeveloped crown sometimes appeared to be floating within the radiolucency radiographically. The first impression was that these cystic lesions had odontogenic keratocysts, but half of them turned out to be dentigerous cysts histopathologically. There has been no report concerning odontogenic cysts involving an incompletely developed crown. The purpose of this paper is to report that dentigerous cysts may develop before the completion of the cemento-enamel junction of a developing crown.

  5. Pericoronal radiolucency associated with incomplete crown

    International Nuclear Information System (INIS)

    Nah, Kyung Soo

    2013-01-01

    The author experienced 8 cases of pericoronal radiolucency involving an incomplete tooth crown that had not developed to form the cemento-enamel junction, and the underdeveloped crown sometimes appeared to be floating within the radiolucency radiographically. The first impression was that these cystic lesions had odontogenic keratocysts, but half of them turned out to be dentigerous cysts histopathologically. There has been no report concerning odontogenic cysts involving an incompletely developed crown. The purpose of this paper is to report that dentigerous cysts may develop before the completion of the cemento-enamel junction of a developing crown.

  6. Extraction separation of lithium isotopes with crown-ethers

    International Nuclear Information System (INIS)

    Tsivadze, A.Yu.; Demin, S.V.; Levkin, A.V.; Zhilov, V.I.; Nikol'skij, S.F.; Knyazev, D.A.

    1990-01-01

    By the method of extraction chromatography lithium isotope separation coefficients are measured during chemical isotope exchange between lithium aquocomplex and its complex in chloroform with crown-ethers: benzo-15-crown-5, 15crown-5, dicyclohexano-18-crown-6 and dibenzo-18-crown-6. Lithium perchlorate and trichloroacetate are the salts extracted. Values of 6 Li/ 7 Li isotope separation are 1.0032-1.020

  7. Factors influencing liver PCB concentrations in sparrowhawks (Accipiter nisus), kestrels (Falco tinnunculus) and herons (Ardea cinerea) in Britain

    Energy Technology Data Exchange (ETDEWEB)

    Wienburg, Claire L.; Shore, Richard F

    2004-11-01

    Large scale temporal and spatial changes in the exposure of terrestrial vertebrates to PCBs have been monitored in the UK by measuring liver residues in sparrowhawks (Accipiter nisus), kestrels (Falco tinnunculus) and grey herons (Ardea cinerea) from throughout the country. Residues in the three species are typically characterised by large intra- and inter-specific variation. Data for 306 sparrowhawks, 186 kestrels and 47 herons collected between 1992 and 1997 as part of a national Predatory Bird Monitoring Scheme were examined to determine how much of this variation was explained by body condition, age and sex, rather than other factors. In all three species, body condition was the single most important factor and accounted for up to 49% of the variation in PCB liver residues; starved birds had the highest liver concentrations. Age and sex were also significant but of lesser importance. Adult sparrowhawks and kestrels had liver PCB residues that were 2 to 10-fold higher than in first-year birds. Sex did not affect residue magnitude in a consistent manner. PCB concentrations in the liver were higher in males than females in both first-year and adult kestrels and in first-year sparrowhawks, but adult female sparrowhawks had similar PCB residues to adult males. Liver residues also varied seasonally. PCB concentrations in first-year sparrowhawks increased during the first year following fledging and a similar pattern was detected in adult female sparrowhawks following egg laying. When these physiological factors were taken into account, it was evident that while kestrels with high fat scores had significantly lower PCB concentrations than either sparrowhawks or herons, liver residues were similar in all three species when birds were in a starved condition. Overall during 1992-1997, the combined influence of body condition, age and sex explained more of the variation in liver PCB concentrations than species differences or other factors, such as geographical variation

  8. Black-necked stilts share nesting in the Merritt Island National Wildlife Refuge

    Science.gov (United States)

    1999-01-01

    A black-necked stilt waits near its nesting mate nest in the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Stilts usually produce three or four brown-spotted buff eggs in a shallow depression lined with grass or shell fragments. In the nesting season they are particularly agressive. Stilts are identified by a distinct head pattern of black and white, very long red legs, and straight, very thin bill. Their habitat is salt marshes and shallow coastal bays from Delaware and northern South America in the East, and freshwater marshes from Oregon and Saskatchewan to the Gulf Coast. The 92,000-acre wildlife refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

  9. Preformed crowns for decayed primary molar teeth.

    Science.gov (United States)

    Innes, Nicola P T; Ricketts, David; Chong, Lee Yee; Keightley, Alexander J; Lamont, Thomas; Santamaria, Ruth M

    2015-12-31

    Crowns for primary molars are preformed and come in a variety of sizes and materials to be placed over decayed or developmentally defective teeth. They can be made completely of stainless steel (know as 'preformed metal crowns' or PMCs), or to give better aesthetics, may be made of stainless steel with a white veneer cover or made wholly of a white ceramic material. In most cases, teeth are trimmed for the crowns to be fitted conventionally using a local anaesthetic. However, in the case of the Hall Technique, PMCs are pushed over the tooth with no local anaesthetic, carious tissue removal or tooth preparation. Crowns are recommended for restoring primary molar teeth that have had a pulp treatment, are very decayed or are badly broken down. However, few dental practitioners use them in clinical practice. This review updates the original review published in 2007. Primary objectiveTo evaluate the clinical effectiveness and safety of all types of preformed crowns for restoring primary teeth compared with conventional filling materials (such as amalgam, composite, glass ionomer, resin modified glass ionomer and compomers), other types of crowns or methods of crown placement, non-restorative caries treatment or no treatment. Secondary objectiveTo explore whether the extent of decay has an effect on the clinical outcome of primary teeth restored with all types of preformed crowns compared with those restored with conventional filling materials. We searched the following electronic databases: Cochrane Oral Health Group Trials Register (to 21 January 2015), Cochrane Central Register of Controlled Trials (CENTRAL; The Cochrane Library, 2014, Issue 12), MEDLINE via Ovid (1946 to 21 January 2015) and EMBASE via Ovid (1980 to 21 January 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the World Health Organization (WHO) International Clinical Trials Registry Platform for ongoing trials and Open Grey for grey literature (to

  10. COMPARSION EFFECTIVENES METHODS REPEIR CROWN TEETH IN DOGS

    OpenAIRE

    CHOOHNO V.S.

    2008-01-01

    Methods of dogs’ crown teeth restoration with using of anchor pin with light curable composite, glass fiber pin with light curable composite, stump crown with prosthetic crown were approved. Their effectiveness was compared. Greater reliability was shown by methods of stump crown with prosthetic crown, when using of which there was no that restoration damage in all cases, but there was no cosmetics effect. Restoration methods with using anchor pin with light curable composite and glass fiber ...

  11. Activity relationships for aromatic crown ethers

    International Nuclear Information System (INIS)

    Wilson, Mark James

    1998-01-01

    This thesis involves an investigation of aromatic crown ethers and a study of their binding constants for alkali metals. The study was motivated by the current needs of the semiconductor industry to improve the scavenging of mobile ions from fabricated circuits. A number of aromatic crown ethers have been sulphonated in an attempt to improve their water solubility and cation binding activity. These materials have been extensively studied and their binding activity determined. In collaboration with a molecular modelling study, the effect of ionisable sulphonate groups on the macrocycles' behaviour has been investigated. The broader issue of the effect of substituents in aromatic crown ethers has also been studied with the preparation of a wide range of substituted crown ethers. The cation binding activity of these materials has been found to bear a simple relationship to the electron withdrawing nature of the aromatic substituents. This relationship can be accurately monitored using electronic charge densities from molecular modelling and this rational has been applied to the study of proton ionisable and lariating crown ethers. The incorporation of crown ethers into polyamic acid and polyimide frameworks has also been investigated, where the resulting materials have been found to exhibit unusual cation binding and uptake properties. These results imply that the combination of the crown ethers' macrocycle and adjacent carboxylic acid residues, from the polyamic acids, are conducive to effective cationic binding. NMR measurements, in conjunction with molecular modelling, have been used to explore the geometry changes encountered as the crown ether goes from it's uncomplexed to its complexed state. The energy requirement for these geometry changes has subsequently been used to examine the cation selectivity of these materials. The electronic charge changes associated with the complexation have also been investigated and correlated with the theoretical results. (author)

  12. Night-to-night arousal variability and interscorer reliability of arousal measurements.

    Science.gov (United States)

    Loredo, J S; Clausen, J L; Ancoli-Israel, S; Dimsdale, J E

    1999-11-01

    Measurement of arousals from sleep is clinically important, however, their definition is not well standardized, and little data exist on reliability. The purpose of this study is to determine factors that affect arousal scoring reliability and night-to-night arousal variability. The night-to-night arousal variability and interscorer reliability was assessed in 20 subjects with and without obstructive sleep apnea undergoing attended polysomnography during two consecutive nights. Five definitions of arousal were studied, assessing duration of electroencephalographic (EEG) frequency changes, increases in electromyographic (EMG) activity and leg movement, association with respiratory events, as well as the American Sleep Disorders Association (ASDA) definition of arousals. NA. NA. NA. Interscorer reliability varied with the definition of arousal and ranged from an Intraclass correlation (ICC) of 0.19 to 0.92. Arousals that included increases in EMG activity or leg movement had the greatest reliability, especially when associated with respiratory events (ICC 0.76 to 0.92). The ASDA arousal definition had high interscorer reliability (ICC 0.84). Reliability was lowest for arousals consisting of EEG changes lasting <3 seconds (ICC 0.19 to 0.37). The within subjects night-to-night arousal variability was low for all arousal definitions In a heterogeneous population, interscorer arousal reliability is enhanced by increases in EMG activity, leg movements, and respiratory events and decreased by short duration EEG arousals. The arousal index night-to-night variability was low for all definitions.

  13. Afforestation of Boreal Open Woodlands: Early Performance and Ecophysiology of Planted Black Spruce Seedlings

    OpenAIRE

    Tremblay, Pascal; Boucher, Jean-Francois; Tremblay, Marc; Lord, Daniel

    2013-01-01

    Open lichen woodlands (LWs) are degraded stands that lack the ability to regenerate naturally due to a succession of natural and/or anthropogenic disturbances. As they represent both interesting forest restoration and carbon sequestration opportunities, we tested disc scarification and planting of two sizes of containerized black spruce (Picea mariana Mill. (BSP)) seedlings for their afforestation. We compared treatment of unproductive LWs to reforestation of harvested, closed-crown black spr...

  14. Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper

    Directory of Open Access Journals (Sweden)

    Susanne Merk

    2016-11-01

    Full Text Available This study investigates the retention load (RL between ZrO2 primary crowns and secondary polyetheretherketone (PEEK crowns made by different fabrication methods with three different tapers. Standardized primary ZrO2 crowns were fabricated with three different tapers: 0°, 1°, and 2° (n = 10/group. Ten secondary crowns were fabricated (i milled from breCam BioHPP blanks (PM; (ii pressed from industrially fabricated PEEK pellets (PP (BioHPP Pellet; or (iii pressed from granular PEEK (PG (BioHPP Granulat. One calibrated operator adjusted all crowns. In total, the RL of 90 secondary crowns were measured in pull-off tests at 50 mm/min, and each specimen was tested 20 times. Two- and one-way ANOVAs followed by a Scheffé’s post-hoc test were used for data analysis (p < 0.05. Within crowns with a 0° taper, the PP group showed significantly higher retention load values compared with the other groups. Among the 1° taper, the PM group presented significantly lower retention loads than the PP group. However, the pressing type had no impact on the results. Within the 2° taper, the fabrication method had no influence on the RL. Within the PM group, the 2° taper showed significantly higher retention load compared with the 1° taper. The taper with 0° was in the same range value as the 1° and 2° tapers. No impact of the taper on the retention value was observed between the PP groups. Within the PG groups, the 0° taper presented significantly lower RL than the 1° taper, whereas the 2° taper showed no differences. The fabrication method of the secondary PEEK crowns and taper angles showed no consistent effect within all tested groups.

  15. Contrasting activity patterns of sympatric and allopatric black and grizzly bears

    Science.gov (United States)

    Schwartz, C.C.; Cain, S.L.; Podruzny, S.; Cherry, S.; Frattaroli, L.

    2010-01-01

    The distribution of grizzly (Ursus arctos) and American black bears (U. americanus) overlaps in western North America. Few studies have detailed activity patterns where the species are sympatric and no studies contrasted patterns where populations are both sympatric and allopatric. We contrasted activity patterns for sympatric black and grizzly bears and for black bears allopatric to grizzly bears, how human influences altered patterns, and rates of grizzlyblack bear predation. Activity patterns differed between black bear populations, with those sympatric to grizzly bears more day-active. Activity patterns of black bears allopatric with grizzly bears were similar to those of female grizzly bears; both were crepuscular and day-active. Male grizzly bears were crepuscular and night-active. Both species were more night-active and less day-active when ???1 km from roads or developments. In our sympatric study area, 2 of 4 black bear mortalities were due to grizzly bear predation. Our results suggested patterns of activity that allowed for intra- and inter-species avoidance. National park management often results in convergence of locally high human densities in quality bear habitat. Our data provide additional understanding into how bears alter their activity patterns in response to other bears and humans and should help park managers minimize undesirable bearhuman encounters when considering needs for temporal and spatial management of humans and human developments in bear habitats. ?? 2010 The Wildlife Society.

  16. Diagnosing night sweats.

    Science.gov (United States)

    Viera, Anthon J; Bond, Michael M; Yates, Scott W

    2003-03-01

    Night sweats are a common outpatient complaint, yet literature on the subject is scarce. Tuberculosis and lymphoma are diseases in which night sweats are a dominant symptom, but these are infrequently found to be the cause of night sweats in modern practice. While these diseases remain important diagnostic considerations in patients with night sweats, other diagnoses to consider include human immunodeficiency virus, gastroesophageal reflux disease, obstructive sleep apnea, hyperthyroidism, hypoglycemia, and several less common diseases. Antihypertensives, antipyretics, other medications, and drugs of abuse such as alcohol and heroin may cause night sweats. Serious causes of night sweats can be excluded with a thorough history, physical examination, and directed laboratory and radiographic studies. If a history and physical do not reveal a possible diagnosis, physicians should consider a purified protein derivative, complete blood count, human immunodeficiency virus test, thyroid-stimulating hormone test, erythrocyte sedimentation rate evaluation, chest radiograph, and possibly chest and abdominal computed tomographic scans and bone marrow biopsy.

  17. Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper.

    Science.gov (United States)

    Merk, Susanne; Wagner, Christina; Stock, Veronika; Eichberger, Marlis; Schmidlin, Patrick R; Roos, Malgorzata; Stawarczyk, Bogna

    2016-11-08

    This study investigates the retention load (RL) between ZrO₂ primary crowns and secondary polyetheretherketone (PEEK) crowns made by different fabrication methods with three different tapers. Standardized primary ZrO₂ crowns were fabricated with three different tapers: 0°, 1°, and 2° ( n = 10/group). Ten secondary crowns were fabricated (i) milled from breCam BioHPP blanks (PM); (ii) pressed from industrially fabricated PEEK pellets (PP) (BioHPP Pellet); or (iii) pressed from granular PEEK (PG) (BioHPP Granulat). One calibrated operator adjusted all crowns. In total, the RL of 90 secondary crowns were measured in pull-off tests at 50 mm/min, and each specimen was tested 20 times. Two- and one-way ANOVAs followed by a Scheffé's post-hoc test were used for data analysis ( p impact on the results. Within the 2° taper, the fabrication method had no influence on the RL. Within the PM group, the 2° taper showed significantly higher retention load compared with the 1° taper. The taper with 0° was in the same range value as the 1° and 2° tapers. No impact of the taper on the retention value was observed between the PP groups. Within the PG groups, the 0° taper presented significantly lower RL than the 1° taper, whereas the 2° taper showed no differences. The fabrication method of the secondary PEEK crowns and taper angles showed no consistent effect within all tested groups.

  18. Minor Characters in William Shakespeare's Twelfth Night and A Midsummer Night's Dream

    Directory of Open Access Journals (Sweden)

    Zahraa Adnan Baqer

    2018-01-01

    Full Text Available This paper aims at discussing the role of the minor characters in William Shakespeare's Twelfth Night and A Midsummer Night's Dream. The study assumes that without the first group of minor characters, associated with Olivia, the play Twelfth Night would lose much of its humor, and without the second group, associated with Sebastian, the play would fall apart. On the other hand, in Shakespeare's A Midsummer Night's Dream minor characters play important roles, without them, the action dose not ran smoothly, or does not ran at all. The paper falls into three sections. Section one deals with the role of each minor character in Twelfth Night.  Section two focuses on the minor characters in A Midsummer Night's Dream. Section three is a conclusion which sums up the findings of the study.

  19. Abundance and Night Hourly Dispersal of the Vesicating Beetles of the Genus Paederus (Coleoptera: Staphylinidae) Attracted to Fluorescent, Incandescent, and Black Light Sources in the Brazilian Savanna.

    Science.gov (United States)

    Lima, D C B; Costa, A A V; Silva, F S

    2015-01-01

    Paederus beetles are cosmopolitan medically important insects that cause dermatitis linearis to humans. In Brazil, despite the medical importance of these beetles, no studies focusing directly on the abundance and ecological features of harmful species exist. Therefore, this study aims at determining the abundance and the nocturnal hourly dispersal of Paederus species attracted to fluorescent, incandescent, and black light sources in the Brazilian savanna. Paederus species were captured from May to September for three consecutive years, between 2011 and 2013. The specimens were caught hourly, from 1800 to 0600 hours. Paederus beetles were attracted to incandescent, fluorescent, and black light lamps as light sources. A total of 959 individuals of five species were collected. The collected species were Paederus protensus Sharp (59.85%), Paederus columbinus Laporte de Castelnau (29.20%), Paederus mutans Sharp (7.09%), Paederus brasiliensis Erichson (3.34%), and Paederus ferus Erichson (0.52%). The black light was the most attractive source, and the darkest collecting point was the most representative for the number of individuals. The lowest catches were captured at full moon, and the highest catches were between 2200 and 0100 hours. Future investigations are needed to better understand the role of night temperature and soil humidity affecting the seasonal growth of Paederus beetle populations of northeastern Brazil. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. Adnyamathanha Night Skies

    Science.gov (United States)

    Curnow, Paul

    2009-06-01

    Aboriginal Australians have been viewing the night skies of Australia for some 45,000 years and possibly much longer. During this time they have been able to develop a complex knowledge of the night sky, the terrestrial environment in addition to seasonal changes. However, few of us in contemporary society have an in-depth knowledge of the nightly waltz of stars above.

  1. Review of Alberta Crown Crude Oil Marketing Program

    International Nuclear Information System (INIS)

    Crandall, G. R.; Kromm, R. B.

    1999-01-01

    This report contains an independent evaluation of the operations of the private marketing agents that are currently marketing the Alberta Crown's share of royalty crude oil. The evaluation includes a review of pricing performance, working relationship, current issues and the overall performance of the marketing arrangements during the fiscal years of 1997 and 1998. Overall, the outsourcing of sales of Crown production to agents is judged to be successful. For example, it has been noted that agents are becoming more aggressive in maintaining and increasing their margins. On the other hand, the increased level of aggressiveness in marketing, while tending to maximize Crown revenues, is also creating a potential conflict on how margins should be shared between the Crown and its agents. Also, there has been evidence of some management issues between the agents and the Crown concerning the extent to which the Crown should share in any increased value which the agent generates by increased third party marketing activities. These differences need to be addressed in order to maintain the strong performance of the marketing program. The consultants also recommend additional guidelines on risk management issues that more clearly define the Crown's risk tolerance. 2 tabs., 4 figs

  2. The crown splash

    Science.gov (United States)

    Deegan, Robert; Brunet, Philippe; Eggers, Jens

    2008-11-01

    The impact of a drop onto a liquid layer and the subsequent splash has important implications for diverse physical processes such as air-sea gas transfer, cooling, and combustion. In the crown splash parameter regime, the splash pattern is highly regular. We focus on this case as a model for the mechanism that leads to secondary droplets, and thus explain the drop size distribution resulting from the splash. We show that the mean number of secondary droplets is determined by the most unstable wavelength of the Rayleigh-Plateau instability. Variations from this mean are governed by the width of the spectrum. Our results for the crown splash will provide the basis for understanding more complicated splashes.

  3. Experimental and numerical modeling of shrub crown fire initiation

    Science.gov (United States)

    Watcharapong Tachajapong; Jesse Lozano; Shakar Mahalingam; Xiangyang Zhou; David Weise

    2009-01-01

    The transition of fire from dry surface fuels to wet shrub crown fuels was studied using laboratory experiments and a simple physical model to gain a better understanding of the transition process. In the experiments, we investigated the effects of varying vertical distances between surface and crown fuels (crown base height), and of the wind speed on crown fire...

  4. Elliptic Fourier analysis of crown shapes in Quercus petraea trees

    Directory of Open Access Journals (Sweden)

    Ovidiu Hâruţa

    2011-02-01

    Full Text Available Shape is a fundamental morphological descriptor, significant in taxonomic research as well as in ecomorphology, one method of estimation being from digitally processed images. In the present study, were analysed shapes of Q. petraea crowns, pertaining to five different stem diameter classes, from three similar stands. Based on measurements on terrestrial digital vertical photos, crown size analysis was performed and correlations between crown and stem variables were tested. Linear regression equations between crown volumes and dbh, and crown volumes and stem volumes were derived, explaining more than half of data variability. Employment of elliptic Fourier analysis (EFA, a powerful analysis tool, permitted the extraction of the mean shape from crowns, characterized by high morphological variability. The extracted, most important, coefficients were used to reconstruct the average shape of the crowns, using Inverse Fourier Transform. A mean shape of the crown, corresponding to stand conditions in which competition is added as influential shaping factor, aside genetic program of the species, is described for each stem diameter class. Crown regions with highest shape variability, from the perspective of stage developmentof the trees, were determined. Accordingly, the main crown shape characteristics are: crown elongation, mass center, asymmetry with regard to the main axis, lateral regions symmetrical and asymmetrical variations.

  5. Elliptic Fourier analysis of crown shapes in Quercus petraea trees

    Directory of Open Access Journals (Sweden)

    Ovidiu Hâruţa

    2011-06-01

    Full Text Available Shape is a fundamental morphological descriptor, significant in taxonomic research as well as in ecomorphology, one method of estimation being from digitally processed images. In the present study, were analysed shapes of Q. petraea crowns, pertaining to five different stem diameter classes, from three similar stands. Based on measurements on terrestrial digital vertical photos, crown size analysis was performed and correlations between crown and stem variables were tested. Linear regression equations between crown volumes and dbh, and crown volumes and stem volumes were derived, explaining more than half of data variability. Employment of elliptic Fourier analysis (EFA, a powerful analysis tool, permitted the extraction of the mean shape from crowns, characterized by high morphological variability. The extracted, most important, coefficients were used to reconstruct the average shape of the crowns, using Inverse Fourier Transform. A mean shape of the crown, corresponding to stand conditions in which competition is added as influential shaping factor, aside genetic program of the species, is described for each stem diameter class. Crown regions with highest shape variability, from the perspective of stage development of the trees, were determined. Accordingly, the main crown shape characteristics are: crown elongation, centroid position, asymmetry with regard to the main axis, lateral regions symmetrical and asymmetrical variations. 

  6. Fracture Strength of Aged Monolithic and Bilayer Zirconia-Based Crowns

    Directory of Open Access Journals (Sweden)

    Deborah Pacheco Lameira

    2015-01-01

    Full Text Available The purpose of this study was to evaluate the effect of design and surface finishing on fracture strength of yttria-tetragonal zirconia polycrystal (Y-TZP crowns in monolithic (1.5 mm thickness and bilayer (0.8 mm zirconia coping and 0.7 mm porcelain veneer configuration after artificial aging. Bovine incisors received crown preparation and Y-TZP crowns were manufactured using CAD/CAM technique, according to the following groups (n=10: Polished monolithic zirconia crowns (PM; Glazed monolithic zirconia crowns (GM; Bi-layer crowns (BL. Crowns were cemented with resin cement, submitted to artificial aging in a chewing simulator (2.5 million cycles/80 N/artificial saliva/37°C, and tested for fracture strength. Two remaining crowns referring to PM and GM groups were submitted to a chemical composition analysis to measure the level of yttrium after aging. One-way ANOVA and Tukey’s test (P=.05 indicated that monolithic zirconia crowns presented similar fracture strength (PM=3476.2 N ± 791.7; GM=3561.5 N ± 991.6, which was higher than bilayer crowns (2060.4 N ± 810.6. There was no difference in the yttrium content among the three surfaces evaluated in the monolithic crowns. Thus, monolithic zirconia crowns present higher fracture strength than bilayer veneered zirconia after artificial aging and surface finishing does not affect their fracture strength.

  7. Evaluation of sampling strategies to estimate crown biomass

    Science.gov (United States)

    Krishna P Poudel; Hailemariam Temesgen; Andrew N Gray

    2015-01-01

    Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree. Crown biomass estimation is useful for different purposes including evaluating the economic feasibility of crown utilization for energy production or forest products, fuel load assessments and fire management strategies, and wildfire...

  8. Characterization of Microsolvated Crown Ethers from Broadband Rotational Spectroscopy

    Science.gov (United States)

    Perez, Cristobal; Schnell, Melanie; Blanco, Susana; Lopez, Juan Carlos

    2016-06-01

    Since they were first synthetized, crown ethers have been extensively used in organometallic chemistry due to their unparalleled binding selectivity with alkali metal cations. From a structural point of view, crown ethers are heterocycles containing oxygen and/or other heteroatoms, although the most common ones are formed from ethylene oxide unit. Crown ethers are conventionally seen as being hydrophilic inside and hydrophobic outside when the structures found for the metal cation complexes are considered. However, crown ethers are extremely flexible and in isolation may present a variety of stable conformations so that their structure may be easily adapted in presence of a strong ligand as an alkali metal cation minimize the energy of the resulting complex. Water can be considered a soft ligand which interacts with crown ethers through moderate hydrogen bonds. It is thus interesting to investigate which conformers are selected by water to form complexes, the preferred interaction sites and the possible conformational changes due to the presence of one or more water molecules. Previous studies identified microsolvated crown ethers but in all cases with a chromophore group attached to the structure. Here we present a broadband rotational spectroscopy study of microsolvated crown ethers produced in a pulsed molecular jet expansion. Several 1:1 and 1:2 crown ether:water aggregates are presented for 12-crown-4, 15-crown-5 and 18-crown-6. Unambiguous identification of the structures has been achieved using isotopic substitution within the water unit. The subtle changes induced in the structures of the crown ether monomer upon complexation and the hydrogen-bonding network that hold them together will be also discussed. F. Gámez, B. Martínez-Haya, S. Blanco,J. C. López and J. L. Alonso, Phys. Chem. Chem. Phys. 2014, 14 12912-12918 V. A. Shubert, C.W. Müller and T. Zwier, J. Phys. Chem. A 2009, 113 8067-8079

  9. Meta-analysis on night shift work and risk of metabolic syndrome.

    Science.gov (United States)

    Wang, F; Zhang, L; Zhang, Y; Zhang, B; He, Y; Xie, S; Li, M; Miao, X; Chan, E Y Y; Tang, J L; Wong, M C S; Li, Z; Yu, I T S; Tse, L A

    2014-09-01

    This study aims to quantitatively summarize the association between night shift work and the risk of metabolic syndrome (MetS), with special reference to the dose-response relationship with years of night shift work. We systematically searched all observational studies published in English on PubMed and Embase from 1971 to 2013. We extracted effect measures (relative risk, RR; or odd ratio, OR) with 95% confidence interval (CI) from individual studies to generate pooled results using meta-analysis approach. Pooled RR was calculated using random- or fixed-effect model. Downs and Black scale was applied to assess the methodological quality of included studies. A total of 13 studies were included. The pooled RR for the association between 'ever exposed to night shift work' and MetS risk was 1.57 (95% CI = 1.24-1.98, pheterogeneity  = 0.001), while a higher risk was indicated in workers with longer exposure to night shifts (RR = 1.77, 95% CI = 1.32-2.36, pheterogeneity  = 0.936). Further stratification analysis demonstrated a higher pooled effect of 1.84 (95% CI = 1.45-2.34) for studies using the NCEP-ATPIII criteria, among female workers (RR = 1.61, 95% CI = 1.10-2.34) and the countries other than Asia (RR = 1.65, 95% CI = 1.39-1.95). Sensitivity analysis confirmed the robustness of the results. No evidence of publication bias was detected. The present meta-analysis suggested that night shift work is significantly associated with the risk of MetS, and a positive dose-response relationship with duration of exposure was indicated. © 2014 The Authors. obesity reviews © 2014 World Obesity.

  10. History of the Night

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The definition of the night, as the period between sunset and sunrise, is consistent and unalterable, regardless of culture and time. However the perception of the night and its economic, social, and cultural roles are subject to change. Which parameters determine these changes? What can we learn by studying them about the specific character of a culture? Why do people experience the night in different ways in different historical periods and how did this affect their lives? How do references to nocturnal activities in historical sources (works of art, narratives) reveal what the artists/authors wish to communicate to their audiences? Can the night be a meaningful subject of historical and archaeological enquiry? A study of the source material in the Greek world (ca. 400 BC-ca. AD 400) shows a continuous effort to colonize the night with activities of the day, to make the night safer, more productive, more rational, more efficient. The main motors for this change were social developments and religion, no...

  11. Digital photography for urban street tree crown conditions

    Science.gov (United States)

    Neil A. Clark; Sang-Mook Lee; William A. Bechtold; Gregory A. Reams

    2006-01-01

    Crown variables such as height, diameter, live crown ratio, dieback, transparency, and density are all collected as part of the overall crown assessment (USDA 2004). Transparency and density are related to the amount of foliage and thus the photosynthetic potential of the tree. These measurements are both currently based on visual estimates and have been shown to be...

  12. Crown Fire Potential

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — Crown fire potential was modeled using FlamMap, an interagency fire behavior mapping and analysis program that computes potential fire behavior characteristics. The...

  13. Effect of posterior crown margin placement on gingival health.

    Science.gov (United States)

    Reitemeier, Bernd; Hänsel, Kristina; Walter, Michael H; Kastner, Christian; Toutenburg, Helge

    2002-02-01

    The clinical impact of posterior crown margin placement on gingival health has not been thoroughly quantified. This study evaluated the effect of posterior crown margin placement with multivariate analysis. Ten general dentists reviewed 240 patients with 480 metal-ceramic crowns in a prospective clinical trial. The alloy was randomly selected from 2 high gold, 1 low gold, and 1 palladium alloy. Variables were the alloy used, oral hygiene index score before treatment, location of crown margins at baseline, and plaque index and sulcus bleeding index scores recorded for restored and control teeth after 1 year. The effect of crown margin placement on sulcular bleeding and plaque accumulation was analyzed with regression models (Prisk of bleeding at intrasulcular posterior crown margins was approximately twice that at supragingival margins. Poor oral hygiene before treatment and plaque also were associated with sulcular bleeding. Facial sites exhibited a lower probability of sulcular bleeding than lingual surfaces. Type of alloy did not influence sulcular bleeding. In this study, placement of crown margins was one of several parameters that affected gingival health.

  14. Solvent Effects on Cesium Complexation with Crown Ethers from Liquid to Supercritical Fluids

    International Nuclear Information System (INIS)

    Wai, Chien M.; Rustenholtz, Anne; Wang, Shaofen; Lee, Su-Chen; Herman, Jamie; Porter, Richard A.

    2004-01-01

    Nuclear magnetic resonance (NMR) techniques were used to study crown ether-water interactions in solvents of low dielectric constants such as chloroform and carbon tetrachloride. Water forms a 1:1 complex with a number of crown ethers including 12-crown-4, 15-crown-5, 18-crown-6, dicyclohexano-18=crown-6, dicyclohexano-24-crown 8, and dibenzl-24-crown-8 in chloroform. Among these crown ethers, the 18-crown-6-H2 complex has the largest equilibrium constant (K=545) and 97% of the crown is complexed to water in chloroform. Addition of carbon tetrachloride to chloroform lowers the equilibrium constants of the crown-water complexes. The partition coefficients of crown ethers (D=crown in water/crown in solvent) between water and organic solvent also vary with solvent composition

  15. Epicormic branching of California black oak: effect of stand and tree characteristics

    Science.gov (United States)

    Philip M. McDonald; Martin W. Ritchie

    1994-01-01

    Young California black oak (Quercus kelloggii Newb.) stands usually require thinning to increase production of acorns and wood products, but epicormic branches, which yield no acorns and constitute a serious lumber degrade. often result. A crown thinning in 60-year-old hardwood stands on a south exposure at the Challenge Experimental Forest in thenorthern Sierra Nevada...

  16. Descriptive statistics of tree crown condition in the Northeastern United States

    Science.gov (United States)

    KaDonna C. Randolph; Randall S. Morin; Jim Steinman

    2010-01-01

    The U.S. Forest Service Forest Inventory and Analysis (FIA) Program uses visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes four crown condition indicators (crown dieback, crown density, foliage transparency, and sapling crown vigor) measured in Connecticut, Delaware, Maine, Maryland, Massachusetts, New...

  17. Fracture rates of IPS Empress all-ceramic crowns--a systematic review.

    Science.gov (United States)

    Heintze, Siegward D; Rousson, Valentin

    2010-01-01

    The aim of this study was to evaluate the clinical fracture rate of crowns fabricated with the pressable, leucite-reinforced ceramic IPS Empress, and relate the results to the type of tooth restored. The database SCOPUS was searched for clinical studies involving full-coverage crowns made of IPS Empress. To assess the fracture rate of the crowns in relation to the type of restored tooth and study, Poisson regression analysis was used. Seven clinical studies were identified involving 1,487 adhesively luted crowns (mean observation time: 4.5+/-1.7 years) and 81 crowns cemented with zinc-phosphate cement (mean observation time: 1.6+/-0.8 years). Fifty-seven of the adhesively luted crowns fractured (3.8%). The majority of fractures (62%) occurred between the third and sixth year after placement. There was no significant influence regarding the test center on fracture rate, but the restored tooth type played a significant role. The hazard rate (per year) for crowns was estimated to be 5 in every 1,000 crowns for incisors, 7 in every 1,000 crowns for premolars, 12 in every 1,000 crowns for canines, and 16 in every 1,000 crowns for molars. One molar crown in the zinc-phosphate group fractured after 1.2 years. Adhesively luted IPS Empress crowns showed a low fracture rate for incisors and premolars and a somewhat higher rate for molars and canines. The sample size of the conventionally luted crowns was too small and the observation period too short to draw meaningful conclusions.

  18. [Finite element analysis of the maxillary central incisor with traditional and modified crown lengthening surgery and post-core restoration in management of crown-root fracture].

    Science.gov (United States)

    Zhen, M; Wei, Y P; Hu, W J; Rong, Q G; Zhang, H

    2016-06-01

    To construct three-dimensional finite element models with modified crown lengthening surgery and post-core restoration in management of various crown-root fracture types, to investigate the intensity and distribution of stressin models mentioned above, and to compare and analyze the indications of traditional and modified crown lengthening surgeries from the mechanic point of view. Nine three-dimensional finite element models with modified crown lengthening surgery and post-core restoration were established and analyzed by micro-CT scanning technique, dental impression scanner, Mimics 10.0, Geomagic studio 9.0 and ANSYS 14.0 software. The von Mises stress of dentin, periodontal ligament, alveolar bone, post and core, as well as the periodontal ligament area and threshold limit value were calculated and compared with the findings of traditional crown lengthening models which had been published earlierby our research group. The von Mises stress intensity of modified crown lengthening models were: dentin>post>core>alveolar bone>periodontal ligament. The maximum von Mises stress of dentin(44.37-80.58 MPa)distributed in lingual central shoulder. The periodontal ligament area of the modified crown lengthening surgery was reduced by 6% to 28%, under the same crown-root fracture conditions, the periodontal ligament area of modified crown lengthening models was larger than that of the traditional crown lengthening models. In modified crown lengthening surgery models, the von Mises stress of periodontal ligament of B3L1m, B3L2m, B3L3m models exceeded their limit values, however, the von Mises stress of periodontal ligament of the B2L2c, B2L3c, B3L1c, B3L2c, B3L3c models exceeded their limit values in traditional crown lengthening surgery models. The modified crown lengthening surgery conserves more periodontal supporting tissues, which facilitates the long-term survival of teeth. The indication of modified crown lengthening surgery is wider than traditional method. The

  19. Navigating through the Crown land process

    Energy Technology Data Exchange (ETDEWEB)

    Dawson, M. [Samsung Renewable Energy Inc., ON (Canada)

    2010-07-01

    Samsung Communications and Technology (Samsung C and T) and the Korea Electric Power Corporation are planning to invest approximately $7 billion to generate 2500 MW of wind and solar energy in Ontario. The plan was centred around the green energy investment agreement signed in January 2010. To date, only 1 project in Ontario has been permitted for development on Crown land, and there have been 3 different versions of the Crown land policy and procedure for the development of wind power projects. The Crown land process is challenged by issues related to grandfathering, timing, competing processes, and the Endangered Species Act. Guidance is needed to identify requirements for studies and evaluation processes. Additional studies are often required by government agencies when new documents and results are reviewed. Projects are also delayed when new species are added to the endangered species list. Wind power developers must keep abreast of proposed regulations and guidelines to ensure that work programs are not delayed. An overview of the current Crown land development process was included. tabs., figs.

  20. Fatigue resistance of CAD/CAM resin composite molar crowns.

    NARCIS (Netherlands)

    Shembish, F.A.; Tong, H.; Kaizer, M.; Janal, M.N.; Thompson, V.P.; Opdam, N.J.M.; Zhang, Y.

    2016-01-01

    OBJECTIVE: To demonstrate the fatigue behavior of CAD/CAM resin composite molar crowns using a mouth-motion step-stress fatigue test. Monolithic leucite-reinforced glass-ceramic crowns were used as a reference. METHODS: Fully anatomically shaped monolithic resin composite molar crowns (Lava

  1. Fracture Resistance Force of Primary Molar Crowns Milled from ...

    African Journals Online (AJOL)

    2018-04-04

    Apr 4, 2018 ... molar stainless steel crown (SSC) and stored in water at 37°C for 30 days. The crowns were seated on Cr‑Co ... model) or chairside (in‑office system model) CAD/ ..... crowns, deformation may be observed instead of fracture.

  2. Bis(hydroxyammonium hexachloridoplatinate(IV–18-crown-6 (1/2

    Directory of Open Access Journals (Sweden)

    Evgeny Bulatov

    2014-01-01

    Full Text Available In the title complex, (NH3OH2[PtCl6]·2C12H24O6, the PtIV atom is coordinated by six chloride anions in a slightly distorted octahedral geometry. The Pt—Cl bond lengths are comparable to those reported for other hexachloridoplatinate(IV species. The hydroxyammonium groups act as linkers between the [PtCl6]2− anion and the crown ether molecules. The anion is linked to two hydroxyammonium cations via O—H...Cl hydrogen bonds and each hydroxyammonium moiety is linked to a crown ether molecule by hydrogen bonds between ammonium H atoms and 18-crown-6 O atoms. The crown ether molecules have the classic crown shape in which all O atoms are located in the inner part of the crown ether ring and all –CH2– groups are turned to the outside.

  3. AB INITIO INVESTIGATION OF 12-CROWN-4 AND BENZO-12-CROWN-4 COMPLEXES WITH Li+, Na+, K+, Zn2+, Cd2+, AND Hg2+

    Directory of Open Access Journals (Sweden)

    Yahmin Yahmin

    2010-06-01

    Full Text Available The structure and binding energies of 12-crown-4 and benzo-12-crown-4 complexes with Li+, Na+, K+, Zn2+, Cd2+, and Hg2+were investigated with ab initio calculations using Hartree-Fock approximation and second-order perturbation theory. The basis set used in this study is lanl2mb. The structure optimization of cation-crown ether complexes was evaluated at HF/lanl2mb level of theory and interaction energy of the corresponding complexes was calculated at MP2/lanl2mb level of theory (MP2/lanl2mb//HF/lanl2mb. Interactions of the crown ethers and the cations were discussed in term of the structure parameter of crown ether. The binding energies of the complexes show that all complex formed from transition metal cations is more stable than the complexes formed from alkali metal cations.   Keywords: 12-crown-4, benzo-12-crown-4, alkali metals, transition metals

  4. Black-footed ferrets and Siberian polecats as ecological surrogates and ecological equivalents

    Science.gov (United States)

    Biggins, D.E.; Hanebury, L.R.; Miller, B.J.; Powell, R.A.

    2011-01-01

    Ecologically equivalent species serve similar functions in different communities, and an ecological surrogate species can be used as a substitute for an equivalent species in a community. Siberian polecats (Mustela eversmanii) and black-footed ferrets (M. nigripes) have long been considered ecological equivalents. Polecats also have been used as investigational surrogates for black-footed ferrets, yet the similarities and differences between the 2 species are poorly understood. We contrasted activity patterns of radiotagged polecats and ferrets released onto ferret habitat. Ferrets tended to be nocturnal and most active after midnight. Polecats were not highly selective for any period of the day or night. Ferrets and polecats moved most during brightly moonlit nights. The diel activity pattern of ferrets was consistent with avoidance of coyotes (Canis latrans) and diurnal birds of prey. Similarly, polecat activity was consistent with avoidance of red foxes (Vulpes vulpes) in their natural range. Intraguild predation (including interference competition) is inferred as a selective force influencing behaviors of these mustelines. Examination of our data suggests that black-footed ferrets and Siberian polecats might be ecological equivalents but are not perfect surrogates. Nonetheless, polecats as surrogates for black-footed ferrets have provided critical insight needed, especially related to predation, to improve the success of ferret reintroductions. ?? 2011 American Society of Mammalogists.

  5. Coast redwood live crown and sapwood

    Science.gov (United States)

    John-Pascal Berrill; Jesse L. Deffress; Jessica M. Engle

    2012-01-01

    Understanding crown rise and sapwood taper will help meet management objectives such as producing long branch-free boles for clear wood and old-growth restoration, or producing sawlogs with a high proportion of heartwood. Coast redwood (Sequoia sempervirens) tree crown ratio data were collected 20 years after partial harvesting in a 65-year-old second growth stand....

  6. Retention Load Values of Telescopic Crowns Made of Y-TZP and CoCr with Y-TZP Secondary Crowns: Impact of Different Taper Angles

    Directory of Open Access Journals (Sweden)

    Susanne Merk

    2016-05-01

    Full Text Available This study aimed to examine and compare the retention load values (RL of different telescopic crown assemblies (Y-TZP and CoCr primary crowns with electroformed and Y-TZP secondary crowns each with three different taper angles (0°, 1° and 2°. Thirty Y-TZP primary crowns with electroformed gold copings (Z/G group and Y-TZP secondary crowns (Z/Z group and 30 CoCr primary crowns with electroformed gold copings (C/G group and Y-TZP secondary crowns (C/Z group, each with taper angles of 0°, 1° and 2°, were fabricated, respectively. With the exception of the electroformed gold copings, all specimens were Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM-milled, then sintered and afterwards manually adapted. In order to stabilize the gold copings, they were fixed in a tertiary structure. The secondary crowns were constructed with a hook, which ensured self-alignment with an upper chain. Afterwards, 20 pull-off test cycles were performed in a universal testing machine under artificial saliva and after weighing the secondary crowns with a 5 kg object for 20 s. Data were analyzed by one-way and two-way Analysis of Variance (ANOVA. C/Z with 1° showed higher (p = 0.009 RL than 0° and 2° tapers. C/G at 1° also showed higher (p = 0.001 RL than at tapers of 0° and 2°. Z/G and C/G at 0° showed lower RL than Z/Z and C/Z (p < 0.001. Primary crowns had no impact on the 0° group. Z/G showed lower RL as compared to C/Z within the 1° group (p = 0.007 and Z/Z in the 2° group (p = 0.006. The primary crown material had no influence on RL. Electroformed copings showed lower RL. Further investigations for 1° as well as for the long-term performance after thermomechanical aging are necessary.

  7. New atraumatic easy removal technique for permanently cemented crown

    Directory of Open Access Journals (Sweden)

    Pravinkumar G Patil

    2012-01-01

    Full Text Available Removal of a permanently cemented crown or fixed partial denture is a cumbersome procedure for a prosthodontist, especially when there is no purchase point available to remove it. The technique described in this article consists of sectioning of a crown on facial surface followed by removal of the crown with orthodontic plier. This technique does not damage the gingival/periodontal tissues or underlying tooth structure as the crown need not to be removed with jerky back-action force.

  8. Root-Crown Relations of Young Sugar Maple and Yellow Birch

    Science.gov (United States)

    Carl H. Tubbs

    1977-01-01

    Young forest-grown sugar maple and yellow birch (1 to 6 inches d.b.h.) crowns were mapped and roots excavated. Crown dimensions were compared. Sugar maple roots usually terminated within a few feet of the crown perimeter. Yellow birch roots frequently terminated well outside crown perimeters and roots of birch were more irregularly distributed than those of maple....

  9. Extracting oil palm crown from WorldView-2 satellite image

    Science.gov (United States)

    Korom, A.; Phua, M.-H.; Hirata, Y.; Matsuura, T.

    2014-02-01

    Oil palm (OP) is the most commercial crop in Malaysia. Estimating the crowns is important for biomass estimation from high resolution satellite (HRS) image. This study examined extraction of individual OP crown from a WorldView-2 image using twofold algorithms, i.e., masking of Non-OP pixels and detection of individual OP crown based on the watershed segmentation of greyscale images. The study site was located in Beluran district, central Sabah, where matured OPs with the age ranging from 15 to 25 years old have been planted. We examined two compound vegetation indices of (NDVI+1)*DVI and NDII for masking non-OP crown areas. Using kappa statistics, an optimal threshold value was set with the highest accuracy at 90.6% for differentiating OP crown areas from Non-OP areas. After the watershed segmentation of OP crown areas with additional post-procedures, about 77% of individual OP crowns were successfully detected in comparison to the manual based delineation. Shape and location of each crown segment was then assessed based on a modified version of the goodness measures of Möller et al which was 0.3, indicating an acceptable CSGM (combined segmentation goodness measures) agreements between the automated and manually delineated crowns (perfect case is '1').

  10. Extracting oil palm crown from WorldView-2 satellite image

    International Nuclear Information System (INIS)

    Korom, A; Phua, M-H; Hirata, Y; Matsuura, T

    2014-01-01

    Oil palm (OP) is the most commercial crop in Malaysia. Estimating the crowns is important for biomass estimation from high resolution satellite (HRS) image. This study examined extraction of individual OP crown from a WorldView-2 image using twofold algorithms, i.e., masking of Non-OP pixels and detection of individual OP crown based on the watershed segmentation of greyscale images. The study site was located in Beluran district, central Sabah, where matured OPs with the age ranging from 15 to 25 years old have been planted. We examined two compound vegetation indices of (NDVI+1)*DVI and NDII for masking non-OP crown areas. Using kappa statistics, an optimal threshold value was set with the highest accuracy at 90.6% for differentiating OP crown areas from Non-OP areas. After the watershed segmentation of OP crown areas with additional post-procedures, about 77% of individual OP crowns were successfully detected in comparison to the manual based delineation. Shape and location of each crown segment was then assessed based on a modified version of the goodness measures of Möller et al which was 0.3, indicating an acceptable CSGM (combined segmentation goodness measures) agreements between the automated and manually delineated crowns (perfect case is '1')

  11. DYNAMICS OF NUMBER OF GREY HERONS (ARDEA CINEREA L. COLONY IN THE UPPER COURSE OF ZAPOROZHYE (DNEPROVSKOYE RESERVOIR

    Directory of Open Access Journals (Sweden)

    Vovk M.V.

    2012-11-01

    Full Text Available The research was performed in the area of natural reserve "Dneprovsko-Orelsky" and its adjacent territory – the island Pogorely. We discovered the changes of number of grey heron in colonial settlements, determined the principal factors influencing the formation of spatial structure of island bird communities. The analysis of nest distribution towards tree breeding biotopes was performed and stability of spatial structure of bird colonies was proved. We were tracking the number dynamics of pioneer colony and revealed the principal ecological and anthropogenic factors influencing the fluctuation of its abundance.

  12. A short-term clinical evaluation of IPS Empress 2 crowns.

    Science.gov (United States)

    Toksavul, Suna; Toman, Muhittin

    2007-01-01

    The aim of this study was to evaluate the clinical performance of all-ceramic crowns made with the IPS Empress 2 system after an observation period of 12 to 60 months. Seventy-nine IPS Empress 2 crowns were placed in 21 patients. The all-ceramic crowns were evaluated clinically, radiographically, and using clinical photographs. The evaluations took place at baseline (2 days after cementation) and at 6-month intervals for 12 to 60 months. Survival rate of the crowns was determined using Kaplan-Meier statistical analysis. Based on the US Public Health Service criteria, 95.24% of the crowns were rated satisfactory after a mean follow-up period of 58 months. Fracture was registered in only 1 crown. One endodontically treated tooth failed as a result of fracture at the cervical margin area. In this in vivo study, IPS Empress 2 crowns exhibited a satisfactory clinical performance during an observation period ranging from 12 to 60 months.

  13. Twenty-nine-month follow-up of a paediatric zirconia dental crown.

    Science.gov (United States)

    Lopez Cazaux, Serena; Hyon, Isabelle; Prud'homme, Tony; Dajean Trutaud, Sylvie

    2017-06-14

    The aim of this paper is to present the long-term follow-up of one paediatric zirconia crown on a deciduous molar. Preformed crowns are part of the armamentarium in paediatric dentistry. In recent years, aesthetic alternatives to preformed metal crowns have been developed, first preveneered crowns and then zirconia crowns. This paper describes the restoration of a primary molar with a zirconia crown (EZ-Pedo, Loomis, California, USA) in an 8-year-old boy. In this clinical case, the protocol for the implementation and maintenance of zirconia crowns is detailed. The patient was followed up for 29 months until the natural exfoliation of his primary molar. The adaptation of the zirconia crown, the gingival health and the wear on the opposing tooth were considered. In this case, the paediatric zirconia crown allowed sustainable functional restoration while restoring a natural appearance of the tooth. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  14. Re/crowning the Jowo Śākyamuni

    DEFF Research Database (Denmark)

    Warner, Cameron

    2011-01-01

    of ritual observance and visions received.  In 1409, Tsongkhapa Lozang Drakpa  (1357-1419) crowned the Jowo, changing his doctrinal and iconographic representations.  I connect the controversy surrounding Tsongkhapa's decision to re/crown the Jowo in 1409 to the significance placed on authenticity...

  15. Crown Ether Complexes of Alkali-Metal Chlorides from SO2.

    Science.gov (United States)

    Reuter, Kirsten; Rudel, Stefan S; Buchner, Magnus R; Kraus, Florian; von Hänisch, Carsten

    2017-07-18

    The structures of alkali-metal chloride SO 2 solvates (Li-Cs) in conjunction with 12-crown-4 or 1,2-disila-12-crown-4 show strong discrepancies, despite the structural similarity of the ligands. Both types of crown ethers form 1:1 complexes with LiCl to give [Li(1,2-disila-12-crown-4)(SO 2 Cl)] (1) and [Li(12-crown-4)Cl]⋅4 SO 2 (2). However, 1,2-disila-12-crown-4 proved unable to coordinate cations too large for the cavity diameter, for example, by the formation of sandwich-type complexes. As a result, 12-crown-4 reacts exclusively with the heavier alkali-metal chlorides NaCl, KCl and RbCl. Compounds [Na(12-crown-4) 2 ]Cl⋅4 SO 2 (3) and [M(12-crown-4) 2 (SO 2 )]Cl⋅4 SO 2 (4: M=K; 5: M=Rb) all showed S-coordination to the chloride ions through four SO 2 molecules. Compounds 4 and 5 additionally exhibit the first crystallographically confirmed non-bridging O,O'-coordination mode of SO 2 . Unexpectedly, the disila-crown ether supports the dissolution of RbCl and CsCl in the solvent and gives the homoleptic SO 2 -solvated alkali-metal chlorides [MCl⋅3 SO 2 ] (6: M=Rb; 7: M=Cs), which incorporate bridging μ-O,O'-coordinating moieties and the unprecedented side-on O,O'-coordination mode. All compounds were characterised by single-crystal X-ray diffraction. The crown ether complexes were additionally studied by using NMR spectroscopy, and the presence of SO 2 at ambient temperature was revealed by IR spectroscopy of the neat compounds. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. 21 CFR 872.3770 - Temporary crown and bridge resin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Temporary crown and bridge resin. 872.3770 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3770 Temporary crown and bridge resin. (a) Identification. A temporary crown and bridge resin is a device composed of a material, such as...

  17. Randomized, Controlled Clinical Trial of Bilayer Ceramic and Metal-Ceramic Crown Performance

    Science.gov (United States)

    Esquivel-Upshaw, Josephine; Rose, William; Oliveira, Erica; Yang, Mark; Clark, Arthur E.; Anusavice, Kenneth

    2013-01-01

    Purpose Analyzing the clinical performance of restorative materials is important, as there is an expectation that these materials and procedures will restore teeth and do no harm. The objective of this research study was to characterize the clinical performance of metal-ceramic crowns, core ceramic crowns, and core ceramic/veneer ceramic crowns based on 11 clinical criteria. Materials and Methods An IRB-approved, randomized, controlled clinical trial was conducted as a single-blind pilot study. The following three types of full crowns were fabricated: (1) metal-ceramic crown (MC) made from a Pd-Au-Ag-Sn-In alloy (Argedent 62) and a glass-ceramic veneer (IPS d.SIGN veneer); (2) non-veneered (glazed) lithium disilicate glass-ceramic crown (LDC) (IPS e.max Press core and e.max Ceram Glaze); and (3) veneered lithia disilicate glass-ceramic crown (LDC/V) with glass-ceramic veneer (IPS Empress 2 core and IPS Eris). Single-unit crowns were randomly assigned. Patients were recalled for each of 3 years and were evaluated by two calibrated clinicians. Thirty-six crowns were placed in 31 patients. A total of 12 crowns of each of the three crown types were studied. Eleven criteria were evaluated: tissue health, marginal integrity, secondary caries, proximal contact, anatomic contour, occlusion, surface texture, cracks/chips (fractures), color match, tooth sensitivity, and wear (of crowns and opposing enamel). Numerical rankings ranged from 1 to 4, with 4 being excellent, and 1 indicating a need for immediate replacement. Statistical analysis of the numerical rankings was performed using a Fisher’s exact test. Results There was no statistically significant difference between performance of the core ceramic crowns and the two veneered crowns at year 1 and year 2 (p > 0.05). All crowns were rated either as excellent or good for each of the clinical criteria; however, between years 2 and 3, gradual roughening of the occlusal surface occurred in some of the ceramic-ceramic crowns

  18. IPS Empress crown system: three-year clinical trial results.

    Science.gov (United States)

    Sorensen, J A; Choi, C; Fanuscu, M I; Mito, W T

    1998-02-01

    The IPS Empress system is a highly esthetic hot pressed glass ceramic material for fabrication of single crowns. Adhesive cementation of the system not only contributes to the esthetics but is necessary for increased strength of the crown. The purpose of this prospective clinical trials was to evaluate the longevity of 75 adhesively cemented Empress full crowns. An additional aim was to assess the adhesive cementation methodology and potential side effects. At the three-year point, one molar crown fractured for a 1.3 percent failure rate. The resin cementation technique that was employed exhibited a low incidence of microleakage with few clinical side effects. There was a 5.6 percent incidence of post-cementation sensitivity, with all symptoms subsiding by eight weeks. None of the crowns in the study required endodontic therapy.

  19. "Chrono-functional milk": The difference between melatonin concentrations in night-milk versus day-milk under different night illumination conditions.

    Science.gov (United States)

    Asher, A; Shabtay, A; Brosh, A; Eitam, H; Agmon, R; Cohen-Zinder, M; Zubidat, A E; Haim, A

    2015-01-01

    Pineal melatonin (MLT) is produced at highest levels during the night, under dark conditions. We evaluated differences in MLT-concentration by comparing daytime versus night time milk samples, from two dairy farms with different night illumination conditions: (1) natural dark (Dark-Night); (2) short wavelength Artificial Light at Night (ALAN, Night-Illuminated). Samples were collected from 14 Israeli Holstein cows from each commercial dairy farm at 04:30 h ("Night-milk") 12:30 h ("Day-milk") and analyzed for MLT-concentration. In order to study the effects of night illumination conditions on cows circadian rhythms, Heart Rate (HR) daily rhythms were recorded. MLT-concentrations of Night-milk samples from the dark-night group were significantly (p Night-illuminated conditions (30.70 ± 1.79 and 17.81 ± 0.33 pg/ml, respectively). Interestingly, night illumination conditions also affected melatonin concentrations at daytime where under Dark-Night conditions values are significantly (p Night-Illuminated conditions, (5.36 ± 0.33 and 3.30 ± 0.18 pg/ml, respectively). There were no significant differences between the two treatments in the milk yield and milk composition except somatic cell count (SCC), which was significantly lower (p = 0.02) in the Dark-Night group compared with the Night-Illuminated group. Cows in both groups presented a significant (p night illuminated cows feeding and milking time are the "time keeper", while in the Dark-night cows, HR rhythms were entrained by the light/dark cycle. The higher MLT-concentration in Dark-night cows with the lower SCC values calls upon farmers to avoid exposure of cows to ALAN. Therefore, under Dark-night conditions milk quality will improve by lowering SCC values where separation between night and day of such milk can produce chrono-functional milk, naturally rich with MLT.

  20. Night Terrors in Children

    OpenAIRE

    Feferman, Irv

    1988-01-01

    Night terrors are a bizarre sleep disorder that affects young children. The child partially awakes during the night agitated, afraid and terrified, and cannot be consoled. These events, which may be related to emotional turmoil, are self-limiting. Psychiatric evaluation is indicated in certain cases, and drug therapy is almost never necessary. Parents should be reassured that night terrors are not dangerous and do not reflect any serious pathology.

  1. Bromine-rich Zinc Bromides: Zn6Br12(18-crown-6)2×(Br2)5, Zn4Br8(18-crown-6)2×(Br2)3, and Zn6Br12(18-crown-6)2×(Br2)2.

    Science.gov (United States)

    Hausmann, David; Feldmann, Claus

    2016-06-20

    The bromine-rich zinc bromides Zn6Br12(18-crown-6)2×(Br2)5 (1), Zn4Br8(18-crown-6)2×(Br2)3 (2), and Zn6Br12(18-crown-6)2×(Br2)2 (3) are prepared by reaction of ZnBr2, 18-crown-6, and elemental bromine in the ionic liquid [MeBu3N][N(Tf)2] (N(Tf)2 = bis(trifluoromethylsulfonyl)amide). Zn6Br12(18-crown-6)2×(Br2)5 (1) is formed instantaneously by the reaction. Even at room temperature, compound 1 releases bromine, which was confirmed by thermogravimetry (TG) and mass spectrometry (MS). The release of Br2 can also be directly followed by the color and density of the title compounds. With controlled conditions (2 weeks, 25 °C, absence of excess Br2) Zn6Br12(18-crown-6)2×(Br2)5 (1) slowly releases bromine with conconcurrent generation of Zn4Br8(18-crown-6)2×(Br2)3 (2) (in ionic liquid) and Zn6Br12(18-crown-6)2×(Br2)2 (3) (in inert oil). All bromine-rich zinc bromides contain voluminous uncharged (e.g., Zn3Br6(18-crown-6), Zn2Br4(18-crown-6)) or ionic (e.g., [Zn2Br3(18-crown-6)](+), [(Zn2Br6)×(Br2)2](2-)) building units with dibromine molecules between the Zn oligomers and partially interconnecting the Zn-containing building units. Due to the structural similarity, the bromine release is possible via crystal-to-crystal transformation with retention of the crystal shape.

  2. Selective crystallization of cations with crown ethers

    International Nuclear Information System (INIS)

    Heffels, Dennis Egidius

    2014-01-01

    The aim of this work was to study the selectivity and preferences of the incorporation of differently sized cations in the cavities of various crown ethers and the characterization of the resulting compounds. The coordination preferences of crown ethers with different cavities have long been known, and the impact of other effects on the structure formation have increasingly become the focus of attention. In this work a comparative overview of the coordination preferences depending on various factors was undertaken. The focus was mainly on the variation of the cavity of the crown ether in the presence of differently sized cations. In addition, the effects of the solvent and differently coordinating anions have been investigated. Within the framework of this work, basic coordination preferences could be detected with rare earth nitrates, which are affected particularly by the choice of the solvent. The formation of different types of structures could be controlled by varying the conditions such that the incorporation of the cation in the cavity of the crown ether was influenced and the formation of a particular type of structure can be influenced partly by the choice of solvent. In this case no direct preferences for the incorporation into the cavity of the crown ether in relation to the cation size were observed for rare earth cations. However, the coordination of the crown ether leads in each case - for lanthanides - to rather high coordination numbers. A total of five new rare earth complexes and two structural variants could be observed with crown ethers. In the study of the selectivity of the incorporation into the cavity, known structures were also reproduced and further structures were characterized but the crystal structures not entirely solved. With the use of monovalent cations such as potassium, lithium or silver a total of nine new compounds could be synthesized, while no clear preferences for the incorporation of certain cations were detected. The

  3. How do different definitions of night shift affect the exposure assessment of night work?

    DEFF Research Database (Denmark)

    Garde, Anne Helene; Hansen, Johnni; Kolstad, Henrik A

    2016-01-01

    the reference definition (at least 3 h of work between 24:00 and 05:00) and definitions using a period during the night. The overlap with definitions based on starting and ending time was less pronounced (64-71 %). The proportion of classified night shifts differs little when night shifts are based...

  4. Night-vision goggles for night-blind subjects : subjective evaluation after 2 years of use

    NARCIS (Netherlands)

    Hartong, D. T.; Kooijman, A. C.

    Purpose: To evaluate the usefulness of night-vision goggles (NVG) for night-blind subjects after 1 and 2 years of use. Methods: Eleven night-blind subjects with retinitis pigmentosa used NVG for a 2-year period. At the end of each year, they were requested to fill-in two questionnaires regarding

  5. Wind Tunnel Experiments to Study Chaparral Crown Fires.

    Science.gov (United States)

    Cobian-Iñiguez, Jeanette; Aminfar, AmirHessam; Chong, Joey; Burke, Gloria; Zuniga, Albertina; Weise, David R; Princevac, Marko

    2017-11-14

    The present protocol presents a laboratory technique designed to study chaparral crown fire ignition and spread. Experiments were conducted in a low velocity fire wind tunnel where two distinct layers of fuel were constructed to represent surface and crown fuels in chaparral. Chamise, a common chaparral shrub, comprised the live crown layer. The dead fuel surface layer was constructed with excelsior (shredded wood). We developed a methodology to measure mass loss, temperature, and flame height for both fuel layers. Thermocouples placed in each layer estimated temperature. A video camera captured the visible flame. Post-processing of digital imagery yielded flame characteristics including height and flame tilt. A custom crown mass loss instrument developed in-house measured the evolution of the mass of the crown layer during the burn. Mass loss and temperature trends obtained using the technique matched theory and other empirical studies. In this study, we present detailed experimental procedures and information about the instrumentation used. The representative results for the fuel mass loss rate and temperature filed within the fuel bed are also included and discussed.

  6. Crown condition dynamics of oak in southern Sweden 1988-1999.

    Science.gov (United States)

    Drobyshev, Igor; Anderson, Stefan; Sonesson, Kerstin

    2007-11-01

    Crown defoliation of oak (Quercus robur and Q. petraea) was analysed in 808 trees during three forest condition surveys (1988, 1993, and 1999) in the southern Sweden. From 1988 to 1999 crown defoliation increased by more than 20%. Changes in crown defoliation were related to the pH in the upper 20-30 cm of the mineral soils, which was closely connected to other measures of soil fertility (cation exchange capacity, CEC and C/N ratio). Trees growing on soils with a high pH (> or =4.00, in BaCl2 filtrate), high CEC and low C/N ratio had significantly lower crown defoliation than trees growing on more acid soils (pH trees with respect to crown defoliation, indicating that decline in crown condition was not due to an age-related increase in crown transparency. Considering only trees younger than 100 years, a significant interaction was observed between changes in crown defoliation and soil pH. Trees younger than 100 years old growing on more acidic soils had a greater increase in crown transparency than trees on more basic soils between 1988 and 1999. Trees > or =100 years old had significantly higher defoliation on more acidic than on more basic soils, however defoliation dynamics of these trees over 1988-99 was not related to soil acidity. Two biotic agents (insect and fungal leaf infections) evaluated in this study did not prove to be important drivers of defoliation dynamics.

  7. INDIRECT EFFECT OF EXTREME FLOODING: DISAPPEARANCE OF WADING BIRDS ROOST CAUSED BY VEGETATION TURN

    Czech Academy of Sciences Publication Activity Database

    Rajchard, J.; Balounová, Z.; Novák, R.; Kindlmann, Pavel

    2007-01-01

    Roč. 26, č. 1 (2007), s. 64-67 ISSN 1335-342X R&D Projects: GA AV ČR IAA6093105; GA AV ČR(CZ) KSK6005114 Keywords : extreme flooding * night heron * spoonbill * little egret * shrubs Subject RIV: EH - Ecology, Behaviour Impact factor: 0.085, year: 2005

  8. Descriptive statistics of tree crown condition in the North Central United States

    Science.gov (United States)

    KaDonna C. Randolph; Randall S. Morin; Jim Steinman

    2010-01-01

    The U.S. Forest Service Forest Inventory and Analysis (FIA) Program uses visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes four crown condition indicators (crown dieback, crown density, foliage transparency, and sapling crown vigor) measured in Illinois, Indiana, Michigan, Minnesota, Missouri, and Wisconsin...

  9. Night shift work exposure profile and obesity: Baseline results from a Chinese night shift worker cohort.

    Science.gov (United States)

    Sun, Miaomiao; Feng, Wenting; Wang, Feng; Zhang, Liuzhuo; Wu, Zijun; Li, Zhimin; Zhang, Bo; He, Yonghua; Xie, Shaohua; Li, Mengjie; Fok, Joan P C; Tse, Gary; Wong, Martin C S; Tang, Jin-Ling; Wong, Samuel Y S; Vlaanderen, Jelle; Evans, Greg; Vermeulen, Roel; Tse, Lap Ah

    2018-01-01

    This study aimed to evaluate the associations between types of night shift work and different indices of obesity using the baseline information from a prospective cohort study of night shift workers in China. A total of 3,871 workers from five companies were recruited from the baseline survey. A structured self-administered questionnaire was employed to collect the participants' demographic information, lifetime working history, and lifestyle habits. Participants were grouped into rotating, permanent and irregular night shift work groups. Anthropometric parameters were assessed by healthcare professionals. Multiple logistic regression models were used to evaluate the associations between night shift work and different indices of obesity. Night shift workers had increased risk of overweight and obesity, and odds ratios (ORs) were 1.17 (95% CI, 0.97-1.41) and 1.27 (95% CI, 0.74-2.18), respectively. Abdominal obesity had a significant but marginal association with night shift work (OR = 1.20, 95% CI, 1.01-1.43). A positive gradient between the number of years of night shift work and overweight or abdominal obesity was observed. Permanent night shift work showed the highest odds of being overweight (OR = 3.94, 95% CI, 1.40-11.03) and having increased abdominal obesity (OR = 3.34, 95% CI, 1.19-9.37). Irregular night shift work was also significantly associated with overweight (OR = 1.56, 95% CI, 1.13-2.14), but its association with abdominal obesity was borderline (OR = 1.26, 95% CI, 0.94-1.69). By contrast, the association between rotating night shift work and these parameters was not significant. Permanent and irregular night shift work were more likely to be associated with overweight or abdominal obesity than rotating night shift work. These associations need to be verified in prospective cohort studies.

  10. Night shift work exposure profile and obesity: Baseline results from a Chinese night shift worker cohort

    Science.gov (United States)

    Feng, Wenting; Wang, Feng; Zhang, Liuzhuo; Wu, Zijun; Li, Zhimin; Zhang, Bo; He, Yonghua; Xie, Shaohua; Li, Mengjie; Fok, Joan P. C.; Tse, Gary; Wong, Martin C. S.; Tang, Jin-ling; Wong, Samuel Y. S.; Vlaanderen, Jelle; Evans, Greg; Vermeulen, Roel; Tse, Lap Ah

    2018-01-01

    Aims This study aimed to evaluate the associations between types of night shift work and different indices of obesity using the baseline information from a prospective cohort study of night shift workers in China. Methods A total of 3,871 workers from five companies were recruited from the baseline survey. A structured self-administered questionnaire was employed to collect the participants’ demographic information, lifetime working history, and lifestyle habits. Participants were grouped into rotating, permanent and irregular night shift work groups. Anthropometric parameters were assessed by healthcare professionals. Multiple logistic regression models were used to evaluate the associations between night shift work and different indices of obesity. Results Night shift workers had increased risk of overweight and obesity, and odds ratios (ORs) were 1.17 (95% CI, 0.97–1.41) and 1.27 (95% CI, 0.74–2.18), respectively. Abdominal obesity had a significant but marginal association with night shift work (OR = 1.20, 95% CI, 1.01–1.43). A positive gradient between the number of years of night shift work and overweight or abdominal obesity was observed. Permanent night shift work showed the highest odds of being overweight (OR = 3.94, 95% CI, 1.40–11.03) and having increased abdominal obesity (OR = 3.34, 95% CI, 1.19–9.37). Irregular night shift work was also significantly associated with overweight (OR = 1.56, 95% CI, 1.13–2.14), but its association with abdominal obesity was borderline (OR = 1.26, 95% CI, 0.94–1.69). By contrast, the association between rotating night shift work and these parameters was not significant. Conclusion Permanent and irregular night shift work were more likely to be associated with overweight or abdominal obesity than rotating night shift work. These associations need to be verified in prospective cohort studies. PMID:29763461

  11. Epilithic Cyanobacterial Communities of a Marine Tropical Beach Rock (Heron Island, Great Barrier Reef): Diversity and Diazotrophy▿

    Science.gov (United States)

    Díez, Beatriz; Bauer, Karolina; Bergman, Birgitta

    2007-01-01

    The diversity and nitrogenase activity of epilithic marine microbes in a Holocene beach rock (Heron Island, Great Barrier Reef, Australia) with a proposed biological calcification “microbialite” origin were examined. Partial 16S rRNA gene sequences from the dominant mat (a coherent and layered pink-pigmented community spread over the beach rock) and biofilms (nonstratified, differently pigmented microbial communities of small shallow depressions) were retrieved using denaturing gradient gel electrophoresis (DGGE), and a clone library was retrieved from the dominant mat. The 16S rRNA gene sequences and morphological analyses revealed heterogeneity in the cyanobacterial distribution patterns. The nonheterocystous filamentous genus Blennothrix sp., phylogenetically related to Lyngbya, dominated the mat together with unidentified nonheterocystous filaments of members of the Pseudanabaenaceae and the unicellular genus Chroococcidiopsis. The dominance and three-dimensional intertwined distribution of these organisms were confirmed by nonintrusive scanning microscopy. In contrast, the less pronounced biofilms were dominated by the heterocystous cyanobacterial genus Calothrix, two unicellular Entophysalis morphotypes, Lyngbya spp., and members of the Pseudanabaenaceae family. Cytophaga-Flavobacterium-Bacteroides and Alphaproteobacteria phylotypes were also retrieved from the beach rock. The microbial diversity of the dominant mat was accompanied by high nocturnal nitrogenase activities (as determined by in situ acetylene reduction assays). A new DGGE nifH gene optimization approach for cyanobacterial nitrogen fixers showed that the sequences retrieved from the dominant mat were related to nonheterocystous uncultured cyanobacterial phylotypes, only distantly related to sequences of nitrogen-fixing cultured cyanobacteria. These data stress the occurrence and importance of nonheterocystous epilithic cyanobacteria, and it is hypothesized that such epilithic cyanobacteria

  12. Descriptive statistics of tree crown condition in the United States Interior West

    Science.gov (United States)

    KaDonna C. Randolph; Mike T. Thompson

    2010-01-01

    The U.S. Forest Service Forest Inventory and Analysis (FIA) Program uses visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes four crown condition indicators (crown dieback, crown density, foliage transparency, and sapling crown vigor) measured in Colorado, Idaho, Nevada, Utah, and Wyoming between 1996 and...

  13. Crowns and Crypts

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 6. Crowns and Crypts - A Fascinating Group of Multidentate Macrocyclic Ligands. Debasis Bandyopadhyay. General Article Volume 6 Issue 6 June 2001 pp 71-79. Fulltext. Click here to view fulltext PDF. Permanent link:

  14. In vitro fracture resistance of three commercially available zirconia crowns for primary molars.

    Science.gov (United States)

    Townsend, Janice A; Knoell, Patrick; Yu, Qingzhao; Zhang, Jian-Feng; Wang, Yapin; Zhu, Han; Beattie, Sean; Xu, Xiaoming

    2014-01-01

    The purpose of this study was to measure the fracture resistance of primary mandibular first molar zirconia crowns from three different manufacturers-EZ Pedo (EZP), NuSmile (NSZ), and Kinder Krowns (KK)-and compare it with the thickness of the zirconia crowns and the measured fracture resistance of preveneered stainless steel crowns (SSCs). The thickness of 20 zirconia crowns from three manufacturers were measured. The mean force required to fracture the crowns was determined. Preveneered NuSmile (NSW) SSCs were tested as a control. EZP crowns were significantly thicker in three of the six measured locations. The force required to fracture the EZP crown was significantly higher than that required for NSZ and KK. There was a positive correlation between fracture resistance and crown thickness in the mesial, distal, mesioocclusal, and distoocclusal dimensions. None of the zirconia crowns proved to be as resistant to fracture as the preveneered SSCs. Statistically significant differences were found among the forces required to fracture zirconia crowns by three different manufacturers. The increase in force correlated with crown thickness. The forces required to fracture the preveneered stainless steel crowns were greater than the forces required to fracture all manufacturers' zirconia crowns.

  15. [Clinical application of IPS-empress 2 pressable all-ceramic crowns].

    Science.gov (United States)

    Wang, Ai-jun; He, Xiao-ming; Liu, Li-xia; Zhang, Chao-biao; Zhang, Min; Shen, Bei-yong

    2007-02-01

    To evaluate the clinical prosthetic effect of IPS-Empress 2 pressahie ceramic crowns. 198 teeth of 70 patients were restored with IPS-Empress 2 pressahie ceramic crowns. The patients were asked to return in one week and every half year. The clinical prosthetic effect was evaluated. Through follow-up of 3-38 months, the veneer porcelain crowns of 3 teeth were broken. 2 crowns fall off due to teeth fracture, gingivitis occurred in 2 teeth, pulpitis or periapical periodontitis occurred in 3 teeth. The shades of 3 crowns were darkening. The prosthetic effect of 185 teeth was satisfied. The rate of satisfaction was 93.4%. IPS-Empress 2 pressable all-ceramic crown has the advantages of aesthetic effect, good hiocompatihility and simple fabrication. But its strength is not enough for posterior teeth and it can not cover the deep color of non-vital teeth and metal materials.

  16. Night Eating Disorders

    Directory of Open Access Journals (Sweden)

    Deniz Tuncel

    2009-08-01

    Full Text Available Hunger is an awakening related biological impulse. The relationship between hunger and sleep is moderated by the control of homeostatic and circadian rhytms of the body. Abnormal eating behavior during sleep period could result from different causes. Abnormal eating during the main sleep period has been categorized as either night eating syndrome or sleep related eating disorder. Night eating syndrome (NES is an eating disorder characterised by the clinical features of morning anorexia, evening hyperphagia, and insomnia with awakenings followed by nocturnal food ingestion. Recently night eating syndrome, conceptualized as a delayed circadian intake of food. Sleep-related eating disorder, thought to represent a parasomnia and as such included within the revised International Classification of Sleep Disorders (ICSD-2, and characterized by nocturnal partial arousals associated with recurrent episodes of involuntary food consumption and altered levels of consciousness. Whether, however, sleep-related eating disorder and night eating syndrome represent different diseases or are part of a continuum is still debated. This review summarizes their characteristics, treatment outcomes and differences between them.

  17. Calorimetric study of binding of some disaccharides with crown ethers

    Energy Technology Data Exchange (ETDEWEB)

    Davydova, Olga I.; Lebedeva, Nataliya Sh.; Parfenyuk, Elena V

    2004-11-01

    Isothermal titration calorimetry has been applied to the determination of the thermodynamic parameters of binding of {beta}-lactose, {alpha},{alpha}-trehalose and sucrose with 15-crown-5 and 18-crown-6 in water at 298.15 K. The formation of 1:1 molecular associates has been found for the systems studied except 18-crown-6 and {beta}-lactose. The associates are preferentially or completely entropy stabilized. The most stable associate is formed between {alpha},{alpha}-trehalose and 18-crown-6. The obtained values of thermodynamic parameters of binding are discussed from the point of view of solute-solvent interactions as well as conformational and structural peculiarities of the disaccharides (DS) and crown ethers (CE)

  18. Calorimetric study of binding of some disaccharides with crown ethers

    International Nuclear Information System (INIS)

    Davydova, Olga I.; Lebedeva, Nataliya Sh.; Parfenyuk, Elena V.

    2004-01-01

    Isothermal titration calorimetry has been applied to the determination of the thermodynamic parameters of binding of β-lactose, α,α-trehalose and sucrose with 15-crown-5 and 18-crown-6 in water at 298.15 K. The formation of 1:1 molecular associates has been found for the systems studied except 18-crown-6 and β-lactose. The associates are preferentially or completely entropy stabilized. The most stable associate is formed between α,α-trehalose and 18-crown-6. The obtained values of thermodynamic parameters of binding are discussed from the point of view of solute-solvent interactions as well as conformational and structural peculiarities of the disaccharides (DS) and crown ethers (CE)

  19. Ceramic molar crown reproducibility by digital workflow manufacturing: An in vitro study.

    Science.gov (United States)

    Jeong, Ii-Do; Kim, Woong-Chul; Park, Jinyoung; Kim, Chong-Myeong; Kim, Ji-Hwan

    2017-08-01

    This in vitro study aimed to analyze and compare the reproducibility of zirconia and lithium disilicate crowns manufactured by digital workflow. A typodont model with a prepped upper first molar was set in a phantom head, and a digital impression was obtained with a video intraoral scanner (CEREC Omnicam; Sirona GmbH), from which a single crown was designed and manufactured with CAD/CAM into a zirconia crown and lithium disilicate crown (n=12). Reproducibility of each crown was quantitatively retrieved by superimposing the digitized data of the crown in 3D inspection software, and differences were graphically mapped in color. Areas with large differences were analyzed with digital microscopy. Mean quadratic deviations (RMS) quantitatively obtained from each ceramic group were statistically analyzed with Student's t-test (α=.05). The RMS value of lithium disilicate crown was 29.2 (4.1) µm and 17.6 (5.5) µm on the outer and inner surfaces, respectively, whereas these values were 18.6 (2.0) µm and 20.6 (5.1) µm for the zirconia crown. Reproducibility of zirconia and lithium disilicate crowns had a statistically significant difference only on the outer surface ( P <.001). The outer surface of lithium disilicate crown showed over-contouring on the buccal surface and under-contouring on the inner occlusal surface. The outer surface of zirconia crown showed both over- and under-contouring on the buccal surface, and the inner surface showed under-contouring in the marginal areas. Restoration manufacturing by digital workflow will enhance the reproducibility of zirconia single crowns more than that of lithium disilicate single crowns.

  20. A Midsummer Night's Science

    CERN Multimedia

    2001-01-01

    Last year, the first Science Night attracted nearly 1500 people. Dipping into history for the space of one night? This is the idea of Geneva's Museum of the History of Science, which is organizing its second Science Night, on 7 and 8 July, on the history of science. The first such event, held last year, was a considerable success with almost 15 000 visitors. The second Science Night, to be held in the magnificent setting of the Perle du Lac Park in Geneva, promises to be a winner too. By making science retell its own history, this major event is intended to show how every scientific and technical breakthrough is the culmination of a long period of growth that began hundreds of years in the past. Dozens of activities and events are included in this programme of time travel: visitors can study the night sky through telescopes and see what Galileo first observed, and then go to see a play on the life of the Italian scientist. Another play, commissioned specially for the occasion, will honour Geneva botanist De ...

  1. [Fractographic analysis of clinically failed anterior all ceramic crowns].

    Science.gov (United States)

    DU, Qian; Zhou, Min-bo; Zhang, Xin-ping; Zhao, Ke

    2012-04-01

    To identify the site of crack initiation and propagation path of clinically failed all ceramic crowns by fractographic analysis. Three clinically failed anterior IPS Empress II crowns and two anterior In-Ceram alumina crowns were retrieved. Fracture surfaces were examined using both optical stereo and scanning electron microscopy. Fractographic theory and fracture mechanics principles were applied to disclose the damage characteristics and fracture mode. All the crowns failed by cohesive failure within the veneer on the labial surface. Critical crack originated at the incisal contact area and propagated gingivally. Porosity was found within the veneer because of slurry preparation and the sintering of veneer powder. Cohesive failure within the veneer is the main failure mode of all ceramic crown. Veneer becomes vulnerable when flaws are present. To reduce the chances of chipping, multi-point occlusal contacts are recommended, and layering and sintering technique of veneering layer should also be improved.

  2. Mesiodistal Crown Dimensions of Permanent Teeth in Bangladeshi Population

    Directory of Open Access Journals (Sweden)

    Saeed Hossain Khan

    2011-09-01

    Full Text Available Background: Variation in tooth size is influenced by genetic and environmental factors. Several studies have reported tooth size variation between and within different racial groups. In order to improve the quality of dental care available, there is a great need for data on the mesiodistal crown dimensions of the individual teeth of Bangladeshi population. Objectives: To find nominative data on the mesiodistal crown dimensions of permanent teeth in Bangladeshi population and to compare the findings with those reported in other populations. Methods: This observational study was done from January, 2008 to June, 2010 in the Department of Orthodontics, Faculty of Dentistry, Bangabandhu Sheikh Mujib Medical University. A total of 244 Bangladeshi subjects (77 males and 167 females, aged 7 – 36 years (mean 18.3 years with no age limit who attended at the above mentioned place for treatment were included in the study. Main outcome measure was mesiodistal crown dimension of each tooth class of permanent dentition. Mesiodistal crown dimensions were measured from dental casts of the permanent teeth. Results: Males had significantly larger teeth than females for maxillary central incisors (p < 0.05 and for the mandibular second premolars (p < 0.001. In both sexes, the maxillary lateral incisors showed the greatest variability [coefficient of variation (CV 10.7%] and the maxillary canines the least (CV 6.9% in mesiodistal crown dimension. Mandibular canines displayed greater sexual dimorphism in mesiodistal crown size than in any other tooth classes. Comparisons of the mesiodistal crown dimensions between population groups showed that Bangladeshis have tooth sizes close to those of North Indians, Icelanders and Jordanians but larger than those of North American Whites. Conclusions: From this study, a standard for the mesiodistal crown dimensions of permanent dentition of Bangladeshi males and females are obtained. Key Words: Crown dimension; Mesio

  3. In vitro evaluation of the marginal integrity of CAD/CAM interim crowns.

    Science.gov (United States)

    Kelvin Khng, Kwang Yong; Ettinger, Ronald L; Armstrong, Steven R; Lindquist, Terry; Gratton, David G; Qian, Fang

    2016-05-01

    The accuracy of interim crowns made with computer-aided design and computer-aided manufacturing (CAD/CAM) systems has not been well investigated. The purpose of this in vitro study was to evaluate the marginal integrity of interim crowns made by CAD/CAM compared with that of conventional polymethylmethacrylate (PMMA) crowns. A dentoform mandibular left second premolar was prepared for a ceramic crown and scanned for the fabrication of 60 stereolithical resin dies, half of which were scanned to fabricate 15 Telio CAD-CEREC and 15 Paradigm MZ100-E4D-E4D crowns. Fifteen Caulk and 15 Jet interim crowns were made on the remaining resin dies. All crowns were cemented with Tempgrip under a 17.8-N load, thermocycled for 1000 cycles, placed in 0.5% acid fuschin for 24 hours, and embedded in epoxy resin before sectioning from the mid-buccal to mid-lingual surface. The marginal discrepancy was measured using a traveling microscope, and dye penetration was measured as a percentage of the overall length under the crown. The mean vertical marginal discrepancy of the conventionally made interim crowns was greater than for the CAD/CAM crowns (P=.006), while no difference was found for the horizontal component (P=.276). The mean vertical marginal discrepancy at the facial surface of the Caulk crowns was significantly greater than that of the other 3 types of interim crowns (Pmargin, the mean horizontal component of the Telio crowns was significantly larger than that of the other 3 types, with no difference at the lingual margins (P=.150). The mean percentage dye penetration for the Paradigm MZ100-E4D crowns was significantly greater and for Jet crowns significantly smaller than for the other 3 crowns (Pmarginal discrepancies of the Jet interim crowns at the facial surface and with the horizontal marginal discrepancies of the Caulk interim crowns at the lingual surface (Pmarginal discrepancy was found with the interim crowns fabricated by CAD/CAM as compared with PMMA crowns

  4. Crown ether derivatives of EDTA: Pt. 6

    International Nuclear Information System (INIS)

    Liu Zhongqun; Qin Shengying; Chen Shaojin; Tan Lin

    1988-01-01

    EDTA-diaminodibenzo-18-crown-6 (cis- and trans-) condensation polymer is a new compound of crown ether derivatives of EDTA. In this paper the adsorption behaviors of U(IV) and U(VI) on this polymer from chloride solutions and effects of hydrochloric acid concentrations, salting-out agents and organic solvents on distribution coefficient (K d ) of uranium are investigated. Adsorption mechanism of uranyl ion (UO 2 2+ ) on this polymer was studied with IR spectra and by means of the adsorption behaviors of compounds of similar structure. Experimental results show that both polyether section and carboxyl groups in EDTA-diaminodibenzo-18-crown-6 take part in complexation with uranyl ion and synergistic effect appeared

  5. A Neural Network Approach to Infer Optical Depth of Thick Ice Clouds at Night

    Science.gov (United States)

    Minnis, P.; Hong, G.; Sun-Mack, S.; Chen, Yan; Smith, W. L., Jr.

    2016-01-01

    One of the roadblocks to continuously monitoring cloud properties is the tendency of clouds to become optically black at cloud optical depths (COD) of 6 or less. This constraint dramatically reduces the quantitative information content at night. A recent study found that because of their diffuse nature, ice clouds remain optically gray, to some extent, up to COD of 100 at certain wavelengths. Taking advantage of this weak dependency and the availability of COD retrievals from CloudSat, an artificial neural network algorithm was developed to estimate COD values up to 70 from common satellite imager infrared channels. The method was trained using matched 2007 CloudSat and Aqua MODIS data and is tested using similar data from 2008. The results show a significant improvement over the use of default values at night with high correlation. This paper summarizes the results and suggests paths for future improvement.

  6. Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from time series observations using Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer and other instruments from HERON ISLAND, KANGAROO ISLAND and others in the Coral Sea, Great Australian Bight and Tasman Sea from 2009-10-09 to 2012-11-28 (NODC Accession 0100062)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0100062 includes chemical, meteorological, physical and time series data collected from HERON ISLAND, KANGAROO ISLAND, MARIA ISLAND, MOORING_HERON...

  7. Optical effects of different colors of artificial gingiva on ceramic crowns.

    Science.gov (United States)

    Wang, Jian; Lin, Jin; Gil, Mindy; Da Silva, John D; Wright, Robert; Ishikawa-Nagai, Shigemi

    2013-08-01

    The interaction between gingival color and the shade of ceramic restorations has never been fully studied. The purpose of this study is to investigate the optical effects of altering artificial gingival color on the ceramic crown shade in the cervical area. Thirty-one all-ceramic crowns of different shades were used in this study with six different artificial gingival colors. Using a spectrophotometer (Crystaleye(®) Olympus, Japan), we measured the shade of crowns in cervical areas with each of six different artificial gingiva. The crown color measured in the presence of pink artificial gingiva (control) was compared with the crown color with five other artificial gingiva. color difference values ΔE* were calculated and compared between the control group and test groups and the correlation of the artificial gingival color with the crown color was also assessed. Significant differences were found in the mean L* and a* values of all-ceramic crowns at the cervical regions in all six gingival color groups (pcolors of artificial gingiva generated clinically detectable shade differences in the cervical region of ceramic crowns. Copyright © 2013. Published by Elsevier Ltd.

  8. Clinical Performance of Pedo Jacket Crowns in Maxillary Anterior Primary Teeth.

    Science.gov (United States)

    Castro, Aimee; Badr, Sherine B Y; El-Badrawy, Wafa; Kulkarni, Gajanan

    2016-09-15

    To assess the clinical performance of Pedo Jacket crowns for restoration of carious primary anterior teeth. A total of 129 carious primary incisors and canines of 48 children younger than 71 months of age- were restored with Pedo Jacket crowns and resin-modified glass ionomer cementation. They were assessed for: ease of use; presence of recurrent decay; wear; partial or complete loss of the crown; color stability; gingival health; and overall clinical success over a 12-month follow-up. The patient's behavior at the restorative appointment during crown placement was also assessed. An overall clinical success of 89.5 percent of the teeth in 87.3 percent of the children was seen one year later. The crowns were easy to use, even in uncooperative children. The color stability, wear, plaque accumulation, and gingival health were acceptable. Discoloration, wear, or complete loss of the crown were found in 13.1 percent, 5.4 percent, and 7.6 percent of children, respectively. Although not statistically significant, failures were associated with poor patient cooperation at the time of crown placement, poor oral hygiene, or operator error. Pedo Jacket crowns are a viable treatment alternative for carious maxillary primary anterior teeth.

  9. A multi-omics based ecological analysis of coastal marine sediments from Gladstone, in Australia's Central Queensland, and Heron Island, a nearby fringing platform reef.

    Science.gov (United States)

    Beale, D J; Crosswell, J; Karpe, A V; Ahmed, W; Williams, M; Morrison, P D; Metcalfe, S; Staley, C; Sadowsky, M J; Palombo, E A; Steven, A D L

    2017-12-31

    The impact of anthropogenic factors arising from point and non-point pollution sources at a multi commodity marine port and its surrounding ecosystems were studied using sediment samples collected from a number of onshore (Gladstone Harbour and Facing Island) and offshore (Heron Island and Fitzroy Reefs) sites in Australia's Central Queensland. Sediment samples were analyzed for trace metals, organic carbon, polycyclic aromatic hydrocarbons (PAH), emerging chemicals of concern (ECC) and sterols. Similarly, the biological and biochemical interaction between the reef and its environment was analyzed by the multi-omic tools of next-generation sequencing characterization of the bacterial community and microbial community metabolic profiling. Overall, the trace elements were observed at the lower end of the Australian environmental guideline values at the offshore sites, while higher values were observed for the onshore locations Nickel and copper were observed above the high trigger value threshold at the onshore sites. The levels of PAH were below limits of detection across all sites. However, some of the ECC and sterols were observed at higher concentrations at both onshore and offshore locations, notably, the cholesterol family sterols and 17α-ethynylestradiol. Multi-omic analyses also indicated possible thermal and photo irradiation stressors on the bacterial communities at all the tested sites. The observed populations of γ-proteobacteria were found in combination with an increased pool of fatty acids that indicate fatty acid synthesis and utilisation of the intermediates of the shikimate pathways. This study demonstrates the value of applying a multi-omics approach for ecological assessments, in which a more detailed assessment of physical and chemical contaminants and their impact on the community bacterial biome is obtained. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  10. Dissolved inorganic carbon, total alkalinity, nitrate, phosphate, temperature and other variables collected from time series observations at Heron Island Reef Flat from 2010-06-01 to 2010-12-13 (NODC Accession 0127256)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This archival package contains carbonate chemistry and environmental parameters data that were collected from a 200-day time series monitoring on the Heron Island...

  11. Nightmares and Night Terrors

    Science.gov (United States)

    ... able to tell you what happened in the dream and why it was scary. Your child may have trouble going back to sleep. Your child might have the same dream again on other nights. What are night terrors? ...

  12. Influence of foliar fertilization on walnut foliar zinc levels and nut production in black walnut

    Science.gov (United States)

    William R. Reid; Andrew L. Thomas

    2013-01-01

    The impact of foliar zinc fertilizer application on nut-bearing black walnut (Juglans nigra L.) trees was studied. Foliar sprays were applied three times per season on two cultivars during four growing seasons by wetting the foliage of the entire crown using a tank mix containing 500 ppm zinc, starting at leaf burst and continuing at 2 week intervals...

  13. Provisional crown failures in dental school predoctoral clinics.

    Science.gov (United States)

    Hyde, Jeffrey D; Bader, James A; Shugars, Daniel A

    2007-11-01

    Following a preliminary study indicating that at least 10 percent of single-unit crown temporary restorations failed in patients who received treatment by predoctoral students, a comprehensive examination of provisional crown failure was initiated to identify strategies to reduce the failure rate. For all provisionalized, natural tooth, single-unit crown preparations in University of North Carolina School of Dentistry predoctoral clinics for one year (N=1008), we noted tooth type, type of crown, student level, faculty coverage experience, treatment clinic, temporary material and luting agent, and retreatment (failure) of the provisional restoration. For failures, we also noted the stage of crown preparation at failure and the time since initial placement of the temporary. We analyzed these data using simple cross-tabs and logistic regression on need for retreatment (alpha =0.05). The failure rate was 18.75 percent (N=189). The median time to failure was twelve days; the 25(th) and 75(th) percentiles were six and twenty-six days. Significant risk factors, in order of odds ratio estimates, were molar tooth, second- or third-year student, and inexperienced faculty. Most provisional failures occurred during the final preparation phase of treatment. Provisional restoration failure is more frequent than was initially suspected from preliminary studies. Strategies for institutional intervention to reduce provisional restoration failure include greater attention to evaluating provisional crowns placed by inexperienced students (sophomores and juniors) and placing more emphasis on the retentiveness of provisional restorations reused following the final impression. Review of provisional evaluation procedures is also indicated for faculty who do not routinely supervise these procedures.

  14. 4-Bromoanilinium perchlorate 18-crown-6 clathrate

    Directory of Open Access Journals (Sweden)

    Min Guo

    2010-11-01

    Full Text Available The reaction of 4-bromoaniline, 18-crown-6, and perchloric acid in methanol yields the title compound, C6H7BrN+·ClO4−·C12H24O6, in which the protonated –NH3+ group forms three bifurcated N—H...O hydrogen bonds to the O atoms of the crown ether.

  15. Intra-Night Variability of OJ 287 with Long-Term Multiband Optical Monitoring

    Directory of Open Access Journals (Sweden)

    Wei Zeng

    2017-11-01

    Full Text Available We present long-term optical multi-band photometric monitoring of the blazar OJ 287 from 6 March 2010 to 3 April 2016, with high temporal resolution in the V R I -bands. The flux variations and colour-magnitude variations on long and short timescales were investigated to understand the emission mechanisms. In our observation, the major outbursts occurred in January 2016, as predicted by the binary pair of black holes model for OJ 287, with F v a r of 1.3∼2.1%, and variability amplitude (Amp of 5.8∼9.0%. The intra-night variability (IDV durations were from 18.5 to 51.3 min, and the minimal variability timescale was about 4.7 min. The colour-magnitude variation showed a weak positive correlation on the long timescale with Pearson’s r = 0 . 450 , while a negative correlation was found on intra-night timescales. We briefly discuss the possible physical mechanisms that are most likely to be responsible for the observed flux and colour-magnitude correlation variability.

  16. Consequences of crown shortening canine teeth in Greenland sled dogs

    DEFF Research Database (Denmark)

    Kortegaard, H E; Anthony Knudsen, T; Dahl, S

    2015-01-01

    OBJECTIVES: To evaluate the consequences of crown shortening, focusing on the prevalence of pulp exposure and periapical pathology in Greenland sled dogs that had had their canine crowns shortened at an early age. METHODS: Five cadaver heads and 54 sled dogs underwent an oral examination for dental...... fractures and pulp exposure of canines. All canines were radiographed and evaluated for periapical pathology. RESULTS: The prevalence of canine pulp exposure in 12 (5 heads and 7 dogs) crown shortened dogs was 91 · 7%, and 21 · 3% in 47 not-crown shortened dogs. A significant (P pulp...... exposure of the canines in the crown shortened group compared to the not-crown shortened group was seen with a relative risk of 4 · 3 on a dog basis and a relative risk of 12 · 2 on a tooth basis. In dogs with pulp exposure of canines (n = 51) the prevalence of periapical pathology was 82 · 4%, but only 0...

  17. Crown and crown-root fractures: an evaluation of the treatment plans for management proposed by 154 specialists in restorative dentistry.

    Science.gov (United States)

    de Castro, Mara Antonio Monteiro; Poi, Wilson Roberto; de Castro, José Carlos Monteiro; Panzarini, Sônia Regina; Sonoda, Celso Koogi; Trevisan, Carolina Lunardelli; Luvizuto, Eloá Rodrigues

    2010-06-01

    Traumatic tooth injuries involve function and aesthetics and cause damage that range from minimal enamel loss to complex fractures involving the pulp tissue and even loss of the tooth crown. Technical knowledge and clinical experience are essential to establish an accurate diagnosis and provide a rational treatment. The purpose of this study was to evaluate the knowledge of Restorative Dentistry specialists about the management of crown and crown-root fractures based on treatment plans proposed by these professionals for these cases. A descriptive questionnaire was mailed to 245 Restorative Dentistry specialists with questions referring to their professional profile and the treatment plans they would propose for the management of crown and crow-root fractures resulting from dental trauma. One hundred and fifty-four questionnaires were returned properly filled. The data were subjected to descriptive statistics and the chi-square test was used to determine the frequency and the level of the significance among the variables. The analysis of data showed that in spite of having a specialist title, all interviewees had great difficulty in planning the treatments. As much as 42.8% of the participants were unable to treat all types of dental trauma. Complicated and uncomplicated crown-root fractures posed the greatest difficulties for the dentists to establish adequate treatment plans because these fractures require multidisciplinary knowledge and approach for a correct case planning and prognosis.

  18. Periodontal response to all-ceramic crowns (IPS Empress) in general practice.

    Science.gov (United States)

    Al-Wahadni, A M; Mansour, Y; Khader, Y

    2006-02-01

    The purpose of this study was to investigate the periodontal response to the presence of all-ceramic crowns (IPS Empress) in general practice patients. The convenience sample included 82 IPS Empress crowns placed in 64 patients. These crowns had been in place for an average of 16.27 (SD 9.26) months and ranged from 6.2 to 48.87 months at the time of clinical examination. Periodontal health status (as determined by dental plaque, gingival health status, periodontal pockets) was assessed around all crowned teeth and around matched contralateral teeth by one calibrated examiner. Periodontal indices utilized included the Plaque Index (PI), Gingival Index (GI) and pocket depth (PD) with calibrated probes graduated in millimetres. Plaque, gingival and PD values for crowned teeth were compared with those for control teeth using Wilcoxon signed-rank test for each clinical parameters. Chi-square was used to test the significance of the difference in their distribution between crowns and control teeth. Statistically, PI (0.35), GI (0.41) and mean PD scores (1.42) of IPS Empress crowned teeth compared less favourably with scores of the control teeth (0.27, 0.23 and 0.86 respectively). Teeth with IPS Empress crowns had poorer periodontal health and more clinically evident plaque than uncrowned teeth.

  19. Determinants of day-night difference in blood pressure, a comparison with determinants of daytime and night-time blood pressure.

    Science.gov (United States)

    Musameh, M D; Nelson, C P; Gracey, J; Tobin, M; Tomaszewski, M; Samani, N J

    2017-01-01

    Blunted day-night difference in blood pressure (BP) is an independent cardiovascular risk factor, although there is limited information on determinants of diurnal variation in BP. We investigated determinants of day-night difference in systolic (SBP) and diastolic (DBP) BP and how these compared with determinants of daytime and night-time SBP and DBP. We analysed the association of mean daytime, mean night-time and mean day-night difference (defined as (mean daytime-mean night-time)/mean daytime) in SBP and DBP with clinical, lifestyle and biochemical parameters from 1562 adult individuals (mean age 38.6) from 509 nuclear families recruited in the GRAPHIC Study. We estimated the heritability of the various BP phenotypes. In multivariate analysis, there were significant associations of age, sex, markers of adiposity (body mass index and waist-hip ratio), plasma lipids (total and low-density lipoprotein cholesterol and triglycerides), serum uric acid, alcohol intake and current smoking status on daytime or night-time SBP and/or DBP. Of these, only age (P=4.7 × 10 -5 ), total cholesterol (P=0.002), plasma triglycerides (P=0.006) and current smoking (P=3.8 × 10 -9 ) associated with day-night difference in SBP, and age (P=0.001), plasma triglyceride (P=2.2 × 10 -5 ) and current smoking (3.8 × 10 -4 ) associated with day-night difference in DBP. 24-h, daytime and night-time SBP and DBP showed substantial heritability (ranging from 18-43%). In contrast day-night difference in SBP showed a lower heritability (13%) while heritability of day-night difference in DBP was not significant. These data suggest that specific clinical, lifestyle and biochemical factors contribute to inter-individual variation in daytime, night-time and day-night differences in SBP and DBP. Variation in day-night differences in BP is largely non-genetic.

  20. Determinants of day–night difference in blood pressure, a comparison with determinants of daytime and night-time blood pressure

    Science.gov (United States)

    Musameh, M D; Nelson, C P; Gracey, J; Tobin, M; Tomaszewski, M; Samani, N J

    2017-01-01

    Blunted day–night difference in blood pressure (BP) is an independent cardiovascular risk factor, although there is limited information on determinants of diurnal variation in BP. We investigated determinants of day–night difference in systolic (SBP) and diastolic (DBP) BP and how these compared with determinants of daytime and night-time SBP and DBP. We analysed the association of mean daytime, mean night-time and mean day–night difference (defined as (mean daytime−mean night-time)/mean daytime) in SBP and DBP with clinical, lifestyle and biochemical parameters from 1562 adult individuals (mean age 38.6) from 509 nuclear families recruited in the GRAPHIC Study. We estimated the heritability of the various BP phenotypes. In multivariate analysis, there were significant associations of age, sex, markers of adiposity (body mass index and waist–hip ratio), plasma lipids (total and low-density lipoprotein cholesterol and triglycerides), serum uric acid, alcohol intake and current smoking status on daytime or night-time SBP and/or DBP. Of these, only age (P=4.7 × 10−5), total cholesterol (P=0.002), plasma triglycerides (P=0.006) and current smoking (P=3.8 × 10−9) associated with day–night difference in SBP, and age (P=0.001), plasma triglyceride (P=2.2 × 10−5) and current smoking (3.8 × 10−4) associated with day–night difference in DBP. 24-h, daytime and night-time SBP and DBP showed substantial heritability (ranging from 18–43%). In contrast day–night difference in SBP showed a lower heritability (13%) while heritability of day–night difference in DBP was not significant. These data suggest that specific clinical, lifestyle and biochemical factors contribute to inter-individual variation in daytime, night-time and day–night differences in SBP and DBP. Variation in day–night differences in BP is largely non-genetic. PMID:26984683

  1. The molecular genetics of crown gall tumorigenesis

    International Nuclear Information System (INIS)

    Hooykaas, P.J.J.; Schilperoort, R.A.

    1984-01-01

    The phytopathogenic bacteria Agrobacterium tumefaciens and A. rhizogenes are the causative agents of the widespread plant diseases ''crown gall'' and ''hairy root'' respectively. It is now well established that virulent strains of these bacterial species transfer a piece of bacterial DNA into plant cells, thereby transforming these into tumor cells. In research much attention has been paid to the agrobacteria for several reasons. First is the desire to develop a system for the genetic engineering of plant cells based on the natural system for gene transfer between Agrobacterium species and plant cells. Second, there is a striking resemblance between the etiology of animal cancers and the plant cancer crown gall that was recognized as early as in 1927. This led to basic studies on the process of plant tumor induction and on the recovery of plant cells from the tumorous state. A third important interest lies in crown gall as a disease that is the cause of economically important losses in agriculture an horticulture in Europe, North America, and Austrailia. Research has been aimed at finding means to prevent crown gall and to cure plants of this disease

  2. Asymptomatic ''crowned dens'' calcification in CT images for the craniovertebral junction

    International Nuclear Information System (INIS)

    Kubota, Gen; Mori, Masataka; Fukushima, Tatsuro

    2007-01-01

    Calcification around the odontoid process suggests 'crowned dens' syndrome, when accompanied with acute occipital headache or neck pain and with inflammatory signs. We retrospectively searched for calcification around the odontoid process in routine CT images of 282 patients emcompassing the craniovertebral junction, and found 13 (4.6%) had 'crowned dens' calcifications with neither characteristic symptoms nor signs suggestive for crowned dens' syndrome. Females of older ages frequently showed asymptomatic crowned dens' calcifications. (author)

  3. Acetylene–ammonia–18-crown-6 (1/2/1

    Directory of Open Access Journals (Sweden)

    Tobias Grassl

    2012-10-01

    Full Text Available The title compound, C2H2·C12H24O6·2NH3, was formed by co-crystallization of 18-crown-6 and acetylene in liquid ammonia. The 18-crown-6 molecule has threefold rotoinversion symmetry. The acteylene molecule lies on the threefold axis and the whole molecule is generated by an inversion center. The two ammonia molecules are also located on the threefold axis and are related by inversion symmetry. In the crystal, the ammonia molecules are located below and above the crown ether plane and are connected by intermolecular N—H...O hydrogen bonds. The acetylene molecules are additionally linked by weak C—H...N interactions into chains that propagate in the direction of the crystallographic c axis. The 18-crown-6 molecule [occupancy ratio 0.830 (4:0.170 (4] is disordered and was refined using a split model.

  4. Evaluation of sampling strategies to estimate crown biomass

    Directory of Open Access Journals (Sweden)

    Krishna P Poudel

    2015-01-01

    Full Text Available Background Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree. Crown biomass estimation is useful for different purposes including evaluating the economic feasibility of crown utilization for energy production or forest products, fuel load assessments and fire management strategies, and wildfire modeling. However, crown biomass is difficult to predict because of the variability within and among species and sites. Thus the allometric equations used for predicting crown biomass should be based on data collected with precise and unbiased sampling strategies. In this study, we evaluate the performance different sampling strategies to estimate crown biomass and to evaluate the effect of sample size in estimating crown biomass. Methods Using data collected from 20 destructively sampled trees, we evaluated 11 different sampling strategies using six evaluation statistics: bias, relative bias, root mean square error (RMSE, relative RMSE, amount of biomass sampled, and relative biomass sampled. We also evaluated the performance of the selected sampling strategies when different numbers of branches (3, 6, 9, and 12 are selected from each tree. Tree specific log linear model with branch diameter and branch length as covariates was used to obtain individual branch biomass. Results Compared to all other methods stratified sampling with probability proportional to size estimation technique produced better results when three or six branches per tree were sampled. However, the systematic sampling with ratio estimation technique was the best when at least nine branches per tree were sampled. Under the stratified sampling strategy, selecting unequal number of branches per stratum produced approximately similar results to simple random sampling, but it further decreased RMSE when information on branch diameter is used in the design and estimation phases. Conclusions Use of

  5. [Finite element analysis of the maxillary central incisor with crown lengthening surgery and post-core restoration in management of crown-root fracture].

    Science.gov (United States)

    Zhen, Min; Hu, Wen-jie; Rong, Qi-guo

    2015-12-18

    To construct the finite element models of maxillary central incisor and the simulations with crown lengthening surgery and post-core restoration in management of different crown-root fracture types, to investigate the stress intensity and distributions of these models mentioned above, and to analyze the indications of crown lengthening from the point of view of mechanics. An extracted maxillary central incisor and alveolar bone plaster model were scanned by Micro-CT and dental impression scanner (3shape D700) respectively. Then the 3D finite element models of the maxillary central incisor and 9 simulations with crown lengthening surgery and post-core restoration were constructed by Mimics 10.0, Geomagic studio 9.0 and ANSYS 14.0 software. The oblique static force (100 N) was applied to the palatal surface (the junctional area of the incisal 1/3 and middle 1/3), at 45 degrees to the longitudinal axis, then the von Mises stress of dentin, periodontal ligament, alveolar bone, post and core, as well as the periodontal ligament area, were calculated. A total of 10 high-precision three-dimensional finite element models of maxillary central incisor were established. The von Mises stress of models: post>dentin>alveolar bone>core>periodontal ligament, and the von Mises stress increased linearly with the augmentation of fracture degree (besides the core). The periodontal ligament area of the crown lengthening was reduced by 12% to 33%. The von Mises stress of periodontal ligament of the B2L2c, B2L3c, B3L1c, B3L2c, B3L3c models exceeded their threshold limit value, respectively. The maxillary central incisors with the labial fracture greater than three-quarter crown length and the palatal fracture deeper than 1 mm below the alveolar crest are not the ideal indications of the crown lengthening surgery.

  6. Fatigue resistance and microleakage of CAD/CAM ceramic and composite molar crowns.

    Science.gov (United States)

    Kassem, Amr S; Atta, Osama; El-Mowafy, Omar

    2012-01-01

    The aim of this study was to determine effect of compressive cyclic loading on fatigue resistance and microleakage of monolithic CAD/CAM molar ceramic and composite crowns. Thirty-two extracted molars were prepared to receive CEREC crowns according to manufacturer's guidelines using a special paralleling device (Parallel-A-Prep). Sixteen feldspathic ceramic crowns (VITABLOCS Mark II) (VMII) and 16 resin-composite crowns (Paradigm-MZ100 blocks) (PMZ) were milled using a CEREC-3D machine. Eight crowns of each group were cemented to their respective teeth using self-etching resin cement (Panavia-F-2.0) (PAN), and eight were cemented using self-adhesive resin cement (RelyX-Unicem-Clicker) (RXU). Following storage for 1 week in water, specimens were subjected to uniaxial compressive cyclic loading in an Instron testing machine at 12 Hz for 1,000,000 cycles. Load was applied at the central fossa, and the cycle range was 60-600 N. Specimens were then subjected to microleakage testing. Data were statistically analyzed using factorial ANOVA and Post Hoc (Tukey HSD) tests. All composite crowns survived compressive cyclic loading without fracture, while three ceramic crowns from the subgroup cemented with RXU developed surface cracks at the center of occlusal surfaces, extending laterally. Microleakage scores of ceramic crowns cemented with PAN were significantly lower than those of the other three subgroups (p < 0.05). After 1,000,000 cycles of compressive cyclic loading, PMZ composite molar crowns were more fatigue-resistant than VMII ceramic crowns. Cement type had a significant effect on fatigue resistance of the ceramic crowns but not the composite ones. Microleakage scores of ceramic crowns cemented with PAN were significantly lower than those of the other subgroups (p < 0.05). © 2011 by The American College of Prosthodontists.

  7. 30 CFR 250.404 - What are the requirements for the crown block?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the requirements for the crown block... General Requirements § 250.404 What are the requirements for the crown block? You must have a crown block safety device that prevents the traveling block from striking the crown block. You must check the device...

  8. Spectrophotometric evaluation of crown fragment a year after ...

    African Journals Online (AJOL)

    Background: Crown fracture is the most common type of fracture and frequently affects the anterior teeth. Crown fractures have been treated in several ways depending on the location and kind of fracture. This case emphasizes reattachment of fractured fragments using fiber-reinforced post. Also this case report underlines ...

  9. SYNTHESIS OF 4’-ALLYLBENZO-3N-CROWN-N ETHERS AND THEIR MASS SPECTRA COMPARED WITH BENZO-3N-CROWN-N ETHERS

    OpenAIRE

    Anwar, Chairil

    2008-01-01

    Synthesis of 4’allylbenzo-3n-crown-n ethers was carried out by reacting demethylated eugenol with α,ω-dichloro-oligoethylene glycols in 1-butanol under basic condition. The mass spectra of 4’allylbenzo-3n-crown-n and benzo-3n-crown-n were investigated by mass spectrometry using electron impact under 70 eV of electron bombardment as ionisation method. The difference between the group of compounds is only the present of allyl moiety as a side chain at the other side of benzene ring. The first g...

  10. Stress distribution difference between Lava Ultimate full crowns and IPS e.max CAD full crowns on a natural tooth and on tooth-shaped implant abutments.

    Science.gov (United States)

    Krejci, Ivo; Daher, René

    2017-04-01

    The goal of this short communication is to present finite element analysis comparison of the stress distribution between CAD/CAM full crowns made of Lava Ultimate and of IPS e.max CAD, adhesively luted to natural teeth and to implant abutments with the shape of natural teeth. Six 3D models were prepared using a 3D content-creating software, based on a micro-CT scan of a human mandibular molar. The geometry of the full crown and of the abutment was the same for all models representing Lava Ultimate full crowns (L) and IPS e.max CAD full crowns (E) on three different abutments: prepared natural tooth (n), titanium abutment (t) and zirconia abutment (z). A static load of 400 N was applied on the vestibular and lingual cusps, and fixtures were applied to the base of the models. After running the static linear analysis, the post-processing data we analyzed. The stress values at the interface between the crown and the abutment of the Lt and Lz groups were significantly higher than the stress values at the same interface of all the other models. The high stress concentration in the adhesive at the interface between the crown and the abutment of the Lava Ultimate group on implants might be one of the factors contributing to the reported debondings of crowns.

  11. Visual Spatial Disorientation: Re-Visiting the Black Hole Illusion

    Science.gov (United States)

    2007-01-24

    National Transportation Safety Board. Controlled Flight into Terrain, Korean Air Flight 801 , Nimitz Hill, Guam; 1997. 50. National Transportation Safety...According to a Boeing study of worldwide commercial airline accidents, the approach and landing phase of flying, although only accounting for 4% of the...VISUAL SPATIAL DISORIENTATION Kraft (31) described four night visual, landing airline accidents. Black Hole Illusion 5 1. In 1965, a United Airlines

  12. Response to crop-tree release by 7-year-old stems of yellow-poplar and black cherry

    Science.gov (United States)

    G.R. Jr. Trimble; G.R. Jr. Trimble

    1973-01-01

    Five years after crop-tree release of yellow-poplar and black cherry sterns in a 7-year-old stand of Appalachian hardwoods, measurements indicated that released trees were but slightly superior to control trees in height, diameter, and crown position. Sprout regrowth of cut tree stems and grapevines had largely nullified the effects of release. Indications are that for...

  13. Night Eating Disorders

    OpenAIRE

    Deniz Tuncel; Fatma Özlem Orhan

    2009-01-01

    Hunger is an awakening related biological impulse. The relationship between hunger and sleep is moderated by the control of homeostatic and circadian rhytms of the body. Abnormal eating behavior during sleep period could result from different causes. Abnormal eating during the main sleep period has been categorized as either night eating syndrome or sleep related eating disorder. Night eating syndrome (NES) is an eating disorder characterised by the clinical features of morning anorexia, even...

  14. Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns

    Directory of Open Access Journals (Sweden)

    Adil Othman ABDULLAH

    Full Text Available ABSTRACT Objective This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. Material and Methods An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone “PEEK”, Telio CAD-Temp, and Protemp™4 (control group. The crowns were divided into four groups (n=10, Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. Results The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99 µm, PEEK 46.75 (±8.26 µm, Telio CAD-Temp 56.10 (±5.65 µm, and Protemp™4 193.07(±35.96 µm (P0.05. Conclusions CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

  15. Ionic complexation of N 2O 4 by 18-crown-6

    Science.gov (United States)

    Ricard, S.; Audet, P.; Savoie, R.

    1988-08-01

    An ionic complex has been obtained from N 2O 4 in the presence of the macrocyclic ether 18-crown-6. This crystalline compound has been shown from its Raman spectrum to have the formula NO +·crown·H(NO 3) 2-, with the nitrosonium ion closely associated with the crown ether rather than with the hydrogen dinitrate accompanying ion. This adduct decomposes readily in moist air to give the known complex (HNO 3·H 2O) 2·crown.

  16. Night shift work and modifiable lifestyle factors.

    Science.gov (United States)

    Pepłońska, Beata; Burdelak, Weronika; Krysicka, Jolanta; Bukowska, Agnieszka; Marcinkiewicz, Andrzej; Sobala, Wojciech; Klimecka-Muszyńska, Dorota; Rybacki, Marcin

    2014-10-01

    Night shift work has been linked to some chronic diseases. Modification of lifestyle by night work may partially contribute to the development of these diseases, nevertheless, so far epidemiological evidence is limited. The aim of the study was to explore association between night shift work and lifestyle factors using data from a cross-sectional study among blue-collar workers employed in industrial plants in Łódź, Poland. The anonymous questionnaire was self-administered among 605 employees (236 women and 369 men, aged 35 or more) - 434 individuals currently working night shifts. Distribution of the selected lifestyle related factors such as smoking, alcohol drinking, physical activity, body mass index (BMI), number of main meals and the hour of the last meal was compared between current, former, and never night shift workers. Adjusted ORs or predicted means were calculated, as a measure of the associations between night shift work and lifestyle factors, with age, marital status and education included in the models as covariates. Recreational inactivity (defined here as less than one hour per week of recreational physical activity) was associated with current night shift work when compared to never night shift workers (OR = 2.43, 95% CI: 1.13-5.22) among men. Alcohol abstinence and later time of the last meal was associated with night shift work among women. Statistically significant positive relationship between night shift work duration and BMI was observed among men (p = 0.029). This study confirms previous studies reporting lower exercising among night shift workers and tendency to increase body weight. This finding provides important public health implication for the prevention of chronic diseases among night shift workers. Initiatives promoting physical activity addressed in particular to the night shift workers are recommended.

  17. Night shift work and modifiable lifestyle factors

    Directory of Open Access Journals (Sweden)

    Beata Pepłońska

    2014-10-01

    Full Text Available Objectives: Night shift work has been linked to some chronic diseases. Modification of lifestyle by night work may partially contribute to the development of these diseases, nevertheless, so far epidemiological evidence is limited. The aim of the study was to explore association between night shift work and lifestyle factors using data from a cross-sectional study among blue-collar workers employed in industrial plants in Łódź, Poland. Material and Methods: The anonymous questionnaire was self-administered among 605 employees (236 women and 369 men, aged 35 or more - 434 individuals currently wor­king night shifts. Distribution of the selected lifestyle related factors such as smoking, alcohol drinking, physical activity, body mass index (BMI, number of main meals and the hour of the last meal was compared between current, former, and never night shift workers. Adjusted ORs or predicted means were calculated, as a measure of the associations between night shift work and lifestyle factors, with age, marital status and education included in the models as covariates. Results: Recreational inactivity (defined here as less than one hour per week of recreational physical activity was associated with current night shift work when compared to never night shift workers (OR = 2.43, 95% CI: 1.13-5.22 among men. Alcohol abstinence and later time of the last meal was associated with night shift work among women. Statistically significant positive relationship between night shift work duration and BMI was observed among men (p = 0.029. Conclusions: This study confirms previous studies reporting lower exercising among night shift workers and tendency to increase body weight. This finding provides important public health implication for the prevention of chronic diseases among night shift workers. Initiatives promoting physical activity addressed in particular to the night shift workers are recommended.

  18. Dioxin, PCB and PBDE exposure in grey heron (ardea cinerea)

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, A.; Thompson, H.; Dsilva, K.; White, S.; Rose, M. [Central Science Laboratory, York (United Kingdom)

    2004-09-15

    In the United Kingdom recent investigations have detected elevated levels of mortality and bone disease in grey herons at an established colony in Nottinghamshire along the course of the river Trent (4). The causes of mortality are unclear but deformities recorded in the other birds include multiple fracture of the tarsus, tibia and metacarpal bones. These findings have prompted a pilot study into assessing the level of environmental contaminants in the tissue and eggs of these birds. Two classes of contaminants have the potential to cause the deformities observed in the birds - heavy metals such as selenium, cadmium, arsenic mercury and lead, and halogenated organic contaminants such as dioxins, and PCBs. This paper discusses levels of these contaminants in the samples of eggs taken from the colony. Additional samples of eggs were also collected from a colony in Hertfordshire and from a site in the north of the country. The discussion will be limited to the halogenated organic contaminants as the levels of heavy metals were similar in all sites and were generally at or above background levels. Given the increased utilisation of brominated flame retardant chemicals over the last decade and the similarities in structure and environmental persistence of some of these compounds to the dioxins and PCBs, polybrominated diphenylethers (PBDEs) were also measured in the samples.

  19. Marginal Assessment of Crowns by the Aid of Parallel Radiography

    Directory of Open Access Journals (Sweden)

    Farnaz Fattahi

    2015-03-01

    Full Text Available Introduction: Marginal adaptation is the most critical item in long-term prognosis of single crowns. This study aimed to assess the marginal quality as well asthe discrepancies in marginal integrity of some PFM single crowns of posterior teeth by employing parallel radiography in Shiraz Dental School, Shiraz, Iran. Methods: In this descriptive study, parallel radiographies were taken from 200 fabricated PFM single crowns of posterior teeth after cementation and before discharging the patient. To calculate the magnification of the images, a metallic sphere with the thickness of 4 mm was placed in the direction of the crown margin on the occlusal surface. Thereafter, the horizontal and vertical space between the crown margins, the margin of preparations and also the vertical space between the crown margin and the bone crest were measured by using digital radiological software. Results: Analysis of data by descriptive statistics revealed that 75.5% and 60% of the cases had more than the acceptable space (50µm in the vertical (130±20µm and horizontal (90±15µm dimensions, respectively. Moreover, 85% of patients were found to have either horizontal or vertical gap. In 77% of cases, the margins of crowns invaded the biologic width in the mesial and 70% in distal surfaces. Conclusion: Parallel radiography can be expedient in the stage of framework try-in to yield some important information that cannot be obtained by routine clinical evaluations and may improve the treatment prognosis

  20. Night and day in the VA: associations between night shift staffing, nurse workforce characteristics, and length of stay.

    Science.gov (United States)

    de Cordova, Pamela B; Phibbs, Ciaran S; Schmitt, Susan K; Stone, Patricia W

    2014-04-01

    In hospitals, nurses provide patient care around the clock, but the impact of night staff characteristics on patient outcomes is not well understood. The aim of this study was to examine the association between night nurse staffing and workforce characteristics and the length of stay (LOS) in 138 veterans affairs (VA) hospitals using panel data from 2002 through 2006. Staffing in hours per patient day was higher during the day than at night. The day nurse workforce had more educational preparation than the night workforce. Nurses' years of experience at the unit, facility, and VA level were greater at night. In multivariable analyses controlling for confounding variables, higher night staffing and a higher skill mix were associated with reduced LOS. © 2014 Wiley Periodicals, Inc.

  1. Displacement of screw-retained single crowns into implants with conical internal connections.

    Science.gov (United States)

    Yilmaz, Burak; Seidt, Jeremy D; McGlumphy, Edwin A; Clelland, Nancy L

    2013-01-01

    Internal conical implant-abutment connections without platforms may lead to axial displacement of crowns during screw tightening. This displacement may affect proximal contacts, incisal edge position, or occlusion. This study aimed to measure the displacement of screw-retained single crowns into an implant in three dimensions during screw tightening by hand or via torque driver. A stereolithic acrylic resin cast was created using computed tomography data from a patient missing the maxillary right central incisor. A 4.0- × 11-mm implant was placed in the edentulous site. Five porcelain-fused-to-metal single crowns were made using "cast-to" abutments. Crowns were tried on the stereolithic model, representing the patient, and hand tightened. The spatial relationship of crowns to the model after hand tightening was determined using three-dimensional digital image correlation (3D DIC), an optical measurement technique. The crowns were then tightened using a torque driver to 20 Ncm and the relative crown positions were again recorded. Testing was repeated three times for each crown, and displacement of the crowns was compared between the hand-tightened and torqued states. Commercial image correlation software was used to analyze the data. Mean vertical and horizontal crown displacement values were calculated after torqueing. The interproximal contacts were evaluated before and after torquing using an 8-μm aluminum foil shim. There were vertical and horizontal differences in crown positions between hand tightening and torqueing. Although these were small in magnitude, detectable displacements occurred in both apical and facial directions. After hand tightening, the 8-μm shim could be dragged without tearing. However, after torque tightening, the interproximal contacts were too tight and the 8-μm shim could not be dragged without tearing. Differences between hand tightening and torque tightening should be taken into consideration during laboratory and clinical

  2. Automatic crown cover mapping to improve forest inventory

    Science.gov (United States)

    Claude Vidal; Jean-Guy Boureau; Nicolas Robert; Nicolas Py; Josiane Zerubia; Xavier Descombes; Guillaume Perrin

    2009-01-01

    To automatically analyze near infrared aerial photographs, the French National Institute for Research in Computer Science and Control developed together with the French National Forest Inventory (NFI) a method for automatic crown cover mapping. This method uses a Reverse Jump Monte Carlo Markov Chain algorithm to locate the crowns and describe those using ellipses or...

  3. Biomedical potentials of crown ethers: prospective antitumor agents.

    Science.gov (United States)

    Kralj, Marijeta; Tusek-Bozić, Ljerka; Frkanec, Leo

    2008-10-01

    Crown ethers are of enormous interest and importance in chemistry, biochemistry, materials science, catalysis, separation, transport and encapsulated processes, as well as in the design and synthesis of various synthetic systems with specific properties, diverse capabilities, and programmable functions. Classical crown ethers are macrocyclic polyethers that contain 3-20 oxygen atoms separated from each other by two or more carbon atoms. They are exceptionally versatile in selectively binding a range of metal ions and a variety of organic neutral and ionic species. Crown ethers are currently being studied and used in a variety of applications beyond their traditional place in chemistry. This review presents additional applications and the ever-increasing biomedical potentials of these intriguing compounds, with particular emphasis on the prospects of their relevance as anticancer agents. We believe that further research in this direction should be encouraged, as crown compounds could either induce toxicities that are different from those of conventional antitumor drugs, or complement drugs in current use, thereby providing a valuable adjunct to therapy.

  4. Clinical performance of IPS-Empress 2 ceramic crowns inserted by general dental practitioners.

    Science.gov (United States)

    Mansour, Yasar F; Al-Omiri, Mahmoud K; Khader, Yousef Saleh; Al-Wahadni, Ahed

    2008-05-01

    The aim of this study was to evaluate the clinical performance of IPS-Empress 2(R) all-ceramic crowns placed by general dental practitioners. Eighty-two IPS-Empress 2 crowns placed in 64 patients (27 females and 37 males) were evaluated. These crowns had been in place for 15.2 to 57.2 months (mean 25.3 months, SD=9.3). Survival analysis was conducted using the Kaplan-Meier method. Of the 82 crowns 93.9% were rated satisfactory. In terms of the integrity of the restorations, fracture was observed in three crowns and two showed a crack upon transillumination. Five crowns were rated unsatisfactory for color match; one for marginal adaptation; and none for discoloration, secondary caries, or sensitivity. IPS-Empress 2(R) is a suitable material to fabricate all-ceramic crowns; when these all-ceramic crowns were inserted by general dental practitioners, they functioned satisfactorily with low failure rates during an observation period ranging between 15.2 to 57.2 months.

  5. Getting a Good Night's Sleep in Adolescence: Do Strategies for Coping With Stress Matter?

    Science.gov (United States)

    Matthews, Karen A; Hall, Martica H; Cousins, Jennifer; Lee, Laisze

    2016-01-01

    Getting a good night's sleep is challenging for adolescents because of early school start times and adolescents' substantial social and physical changes. We tested whether key indices of sleep health are associated with usual styles of coping with stress and interpersonal conflict in healthy black and white adolescents. Two hundred forty-two (57% female, 56% black) high school students completed daily sleep diaries, questionnaires, and actigraphy across a school week. Linear regression models tested associations, independent of race, gender, and other covariates. Students who reported using disengagement coping exhibited poor sleep health. They had shorter sleep duration, more fragmented sleep, delayed sleep, and increased daytime sleepiness. Unexpectedly, positive engagement coping was related to daytime sleepiness and delayed sleep, although not in models that included disengagement coping. Coping strategies may be an important influence on adolescent sleep. Future research should evaluate the antecedent-consequent relationships among coping, sleep, and stress.

  6. The marginal fit of selective laser melting-fabricated metal crowns: an in vitro study.

    Science.gov (United States)

    Xu, Dan; Xiang, Nan; Wei, Bin

    2014-12-01

    The selective laser melting technique is attracting interest in prosthetic dentistry. The marginal fit is a key criterion for fixed restorations. The purpose of the study was to evaluate the marginal fit of cast cobalt-chromium alloy crowns versus the fit of selective laser melting-fabricated crowns. The marginal gap widths of 36 single crowns (18 selective laser melting-fabricated cobalt-chromium metal crowns and 18 cobalt-chromium cast crowns) were determined with a silicone replica technique. Each crown specimen was cut into 4 sections, and the marginal gap width of each cross section was evaluated by stereomicroscopy (× 100). The Student t test was used to evaluate whether significant differences occurred in the marginal gap widths between the selective laser melting-fabricated and cast cobalt-chromium metal crowns (α=.05). The mean marginal gap width of the cast crowns (170.19 μm) was significantly wider than that of the selective laser melting-fabricated crowns (102.86 μm). Selective laser melting-fabricate cobalt-chromium dental crowns found improved marginal gap widths compared with traditional cast crowns. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  7. Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design

    Directory of Open Access Journals (Sweden)

    Mirković Nemanja

    2012-01-01

    Full Text Available Background/Aim. Fracture toughness determines functional crown strenght and prevents damages on ceramics during mastication. There is a lack of relevant literature data about fracture toughness of crowns made by feather-edge preparation. Mechanical testing of ceramic samples is supposed to show if feather-edge tooth preparation is a successful method for making ceramic crowns without any risk of reduction of their mechanical properties. This research was done to establish effects of feather-edge tooth preparation on fracture toughness of single zirconia ceramic crowns. Methods. The research was performed as an experimental study. Sixty (60 ceramic crowns were made on non-carious extracted human premolars. Thirty (30 crowns were made on the basis of feather-edge preparation (experimental group I. The group II included 30 crowns made on 1 mm rounded shoulder. Crowns fabrication was executed on a copy mill production system “Zirkonzahn” (Zirkonzahn GMBH, Gais, Germany. The spherical compression test was used to determine fracture toughness, using 6 mm diameter ceramic ball. Fracture load for damaging ceramic crown was recorded on a universal testing machine - Zwick, type 1464, with the speed of 0.05 mm/min. Results. The results of this research introduced significant differences between fracture toughness of ceramic samples in every examined group. However, fracture toughness of crowns from both group was above 2 000 N, what was double beyond a recommended value. The mean value of fracture toughness in the feather-edge group was 2 090 N, and in shoulder group it was 2 214 N. Conclusion. This research showed a high fracture toughness of zirconia crowns made on feather-edge preparation. The examined crowns showed a fracture resistance at a sufficient distance in relation to the minimum values of functional loads. Further research of functional loads of these crown is necessary, as well as research of marginal adaptation of cemented crowns and

  8. Online recovery of radiocesium from soil, cellulose and plant samples by supercritical fluid extraction employing crown ethers and calix-crown derivatives as extractants

    International Nuclear Information System (INIS)

    Kanekar, A.S.; Pathak, P.N.; Mohapatra, P.K.

    2014-01-01

    Two crown ethers (CEs) viz. dibenzo18crown6, and dibenzo12crown7 and three calix-crown derivatives viz. (octyloxy)calix[4]arene-mono-crown-6 (CMC), calix[4]arene-bis(o-benzocrown-6) (CBC), and calix[4]arene-bis(naphthocrown-6) (CNC) were evaluated for the recovery of 137 Cs from synthetic soil, cellulose (tissue paper), and plant samples by supercritical fluid extraction (SFE) route. CEs showed poor extraction of 137 Cs from soil matrix. SFE experiments using 1 × 10 -3 M solutions of CMC, CBC and CNC in acetonitrile at 3 M HNO 3 as modifiers displayed better extraction of 137 Cs, viz. 21(±2) % (CMC), 16.5(±3) % (CBC), and 4(±1) % (CNC). It was not possible to recover 137 Cs quantitatively from soil matrix. The inefficient extraction of 137 Cs from soil matrix was attributed to its incorporation into the interstitial sites. Experiments on tissue papers using CMC showed near quantitative 137 Cs recovery. On the other hand, recovery from plant samples varied between 50(±5) % (for stems) and 75(±5) % (for leaves). (author)

  9. Oxidative DNA damage during night shift work.

    Science.gov (United States)

    Bhatti, Parveen; Mirick, Dana K; Randolph, Timothy W; Gong, Jicheng; Buchanan, Diana Taibi; Zhang, Junfeng Jim; Davis, Scott

    2017-09-01

    We previously reported that compared with night sleep, day sleep among shift workers was associated with reduced urinary excretion of 8-hydroxydeoxyguanosine (8-OH-dG), potentially reflecting a reduced ability to repair 8-OH-dG lesions in DNA. We identified the absence of melatonin during day sleep as the likely causative factor. We now investigate whether night work is also associated with reduced urinary excretion of 8-OH-dG. For this cross-sectional study, 50 shift workers with the largest negative differences in night work versus night sleep circulating melatonin levels (measured as 6-sulfatoxymelatonin in urine) were selected from among the 223 shift workers included in our previous study. 8-OH-dG concentrations were measured in stored urine samples using high performance liquid chromatography with electrochemical detection. Mixed effects models were used to compare night work versus night sleep 8-OH-dG levels. Circulating melatonin levels during night work (mean=17.1 ng/mg creatinine/mg creatinine) were much lower than during night sleep (mean=51.7 ng/mg creatinine). In adjusted analyses, average urinary 8-OH-dG levels during the night work period were only 20% of those observed during the night sleep period (95% CI 10% to 30%; psleep, is associated with reduced repair of 8-OH-dG lesions in DNA and that the effect is likely driven by melatonin suppression occurring during night work relative to night sleep. If confirmed, future studies should evaluate melatonin supplementation as a means to restore oxidative DNA damage repair capacity among shift workers. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  10. Influence of implant position on clinical crown length and peri-implant soft tissue dimensions at implant-supported single crowns replacing maxillary central incisors

    DEFF Research Database (Denmark)

    Peng, Min; Fei, Wei; Hosseini, Mandana

    2013-01-01

    The aims of the present study were to evaluate the influence of implant position on clinical crown length and marginal soft tissue dimensions at implant-supported single crowns of maxillary central incisors, and to validate the papilla index score (PIS). Twenty-five patients, who had lost one of ...... abutments and did not necessarily result in an increased crown length. The distal implant papilla heightwas obviously shorter, althoughthe mesial papilla height was similar to thatof the healthy dentition.The papilla index score was tested to be a valid index for papilla fill....

  11. A meta-analysis on dose-response relationship between night shift work and the risk of breast cancer.

    Science.gov (United States)

    Wang, F; Yeung, K L; Chan, W C; Kwok, C C H; Leung, S L; Wu, C; Chan, E Y Y; Yu, I T S; Yang, X R; Tse, L A

    2013-11-01

    This study aimed to conduct a systematic review to sum up evidence of the associations between different aspects of night shift work and female breast cancer using a dose-response meta-analysis approach. We systematicly searched all cohort and case-control studies published in English on MEDLINE, Embase, PSYCInfo, APC Journal Club and Global Health, from January 1971 to May 2013. We extracted effect measures (relative risk, RR; odd ratio, OR; or hazard ratio, HR) from individual studies to generate pooled results using meta-analysis approaches. A log-linear dose-response regression model was used to evaluate the relationship between various indicators of exposure to night shift work and breast cancer risk. Downs and Black scale was applied to assess the methodological quality of included studies. Ten studies were included in the meta-analysis. A pooled adjusted relative risk for the association between 'ever exposed to night shift work' and breast cancer was 1.19 [95% confidence interval (CI) 1.05-1.35]. Further meta-analyses on dose-response relationship showed that every 5-year increase of exposure to night shift work would correspondingly enhance the risk of breast cancer of the female by 3% (pooled RR = 1.03, 95% CI 1.01-1.05; Pheterogeneity night shifts would result in a 13% (RR = 1.13, 95% CI 1.07-1.21; Pheterogeneity = 0.06) increase in breast cancer risk. This systematic review updated the evidence that a positive dose-response relationship is likely to present for breast cancer with increasing years of employment and cumulative shifts involved in the work.

  12. Elliptic Fourier analysis of crown shapes in Quercus petraea trees

    OpenAIRE

    Ovidiu Hâruţa

    2011-01-01

    Shape is a fundamental morphological descriptor, significant in taxonomic research as well as in ecomorphology, one method of estimation being from digitally processed images. In the present study, were analysed shapes of Q. petraea crowns, pertaining to five different stem diameter classes, from three similar stands. Based on measurements on terrestrial digital vertical photos, crown size analysis was performed and correlations between crown and stem variables were tested. Linear regression ...

  13. Fractal approach to computer-analytical modelling of tree crown

    International Nuclear Information System (INIS)

    Berezovskaya, F.S.; Karev, G.P.; Kisliuk, O.F.; Khlebopros, R.G.; Tcelniker, Yu.L.

    1993-09-01

    In this paper we discuss three approaches to the modeling of a tree crown development. These approaches are experimental (i.e. regressive), theoretical (i.e. analytical) and simulation (i.e. computer) modeling. The common assumption of these is that a tree can be regarded as one of the fractal objects which is the collection of semi-similar objects and combines the properties of two- and three-dimensional bodies. We show that a fractal measure of crown can be used as the link between the mathematical models of crown growth and light propagation through canopy. The computer approach gives the possibility to visualize a crown development and to calibrate the model on experimental data. In the paper different stages of the above-mentioned approaches are described. The experimental data for spruce, the description of computer system for modeling and the variant of computer model are presented. (author). 9 refs, 4 figs

  14. Determination of stability constants of K and Cs nitrate complex with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions

    International Nuclear Information System (INIS)

    Myasoedova, T.G.; Ponomareva, A.V.; Zagorets, P.A.; Filippov, E.A.

    1984-01-01

    Total stability constants of K and Cs nitrate complexes with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions were determined by the method of low-frequency contact conductometry. Clearly defined K/Cs selectivity is observed for the system with dibenzo-18-crown-6. It is shown that lgβ depends on permittivity of the solvent. The decrease of permittivity of isopropanol aqueous solutions results in reduction of K/Cs selectivity of DB18C6

  15. Determination of stability constants of K and Cs nitrate complex with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Myasoedova, T G; Ponomareva, A V; Zagorets, P A; Filippov, E A [Moskovskij Khimiko-Tekhnologicheskij Inst. (USSR)

    1984-08-01

    Total stability constants of K and Cs nitrate complexes with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions were determined by the method of low-frequency contact conductometry. Clearly defined K/Cs selectivity is observed for the system with dibenzo-18-crown-6. It is shown that lg..beta.. depends on permittivity of the solvent. The decrease of permittivity of isopropanol aqueous solutions results in reduction of K/Cs selectivity of DB18C6.

  16. RICHMOND CROWN - FOR RESTORATION OF BADLY MUTILATED POSTERIOR TEETH : A CASE REPORT

    Directory of Open Access Journals (Sweden)

    Yadav

    2015-07-01

    Full Text Available Restoration of badly broken endodontically treated teeth is a common problem in restorative dentistry. Such teeth often require additional support from the root canal by means of a post and core restoration. In cases where tooth structure is significantly lost full coverage restorations for posterior teeth are necessary to achieve proper tooth form and function. Badly broken teeth with minimal or no crown structure require added retention and support. The Richmond crown can be a good treatment alternative for restoration of such teeth. The Richmond crown was introduced in 1878 and incorporated a threaded tube in the canal with a screw retained crown. It was later modified to eliminate the threaded tube and was redesigned as a one piece dowel and crown. This case report shows restoration of badly mutilated posterior teeth with Richmond crown.

  17. Rapid crown root development confers tolerance to zinc deficiency in rice

    Directory of Open Access Journals (Sweden)

    Amrit Kaur eNanda

    2016-03-01

    Full Text Available Zinc (Zn deficiency is one of the leading nutrient disorders in rice (Oryza sativa. Many studies have identified Zn efficient rice genotypes, but causal mechanisms for Zn deficiency tolerance remain poorly understood. Here we report a detailed study of the impact of Zn deficiency on crown root development of rice genotypes, differing in their tolerance to this stress. Zn deficiency delayed crown root development and plant biomass accumulation in both Zn efficient and inefficient genotypes, with the effects being much stronger in the latter. Zn efficient genotypes had developed new crown roots as early as three days after transplanting (DAT to a Zn deficient field and that was followed by a significant increase in total biomass by 7 DAT. Zn-inefficient genotypes developed few new crown roots and did not increase biomass during the first seven days following transplanting. This correlated with Zn efficient genotypes retranslocating a higher proportion of shoot Zn to their roots, compared to Zn inefficient genotypes. These latter genotypes were furthermore not efficient in utilizing the limited Zn for root development. Histological analyses indicated no anomalies in crown tissue of Zn-efficient or inefficient genotypes that would have suggested crown root emergence was impeded. We therefore conclude that the rate of crown root initiation was differentially affected by Zn deficiency between genotypes. Rapid crown root development, following transplanting, was identified as a main causative trait for tolerance to Zn deficiency and better Zn retranslocation from shoot to root was a key attribute of Zn-efficient genotypes.

  18. Organization and management of ATLAS nightly builds

    International Nuclear Information System (INIS)

    Luehring, F; Obreshkov, E; Quarrie, D; Rybkine, G; Undrus, A

    2010-01-01

    The automated multi-platform software nightly build system is a major component in the ATLAS collaborative software organization, validation and code approval schemes. Code developers from ATLAS participating Institutes spread all around the world use about 30 branches of nightly releases for testing new packages, verification of patches to existing software, and migration to new platforms and compilers. The nightly releases lead up to, and are the basis of, stable software releases used for data processing worldwide. The ATLAS nightly builds are managed by the fully automated NICOS framework on the computing farm with 44 powerful multiprocessor nodes. The ATN test tool is embedded within the nightly system and provides results shortly after full compilations complete. Other test frameworks are synchronized with NICOS jobs and run larger scale validation jobs using the nightly releases. NICOS web pages dynamically provide information about the progress and results of the builds. For faster feedback, E-mail notifications about nightly releases problems are automatically distributed to the developers responsible.

  19. CAD/CAM glass ceramics for single-tooth implant crowns: a finite element analysis.

    Science.gov (United States)

    Akça, Kvanç; Cavusoglu, Yeliz; Sagirkaya, Elcin; Aybar, Buket; Cehreli, Murat Cavit

    2013-12-01

    To evaluate the load distribution of CAD/CAM mono-ceramic crowns supported with single-tooth implants in functional area. A 3-dimensional numerical model of a soft tissue-level implant was constructed with cement-retained abutment to support glass ceramic machinable crown. Implant-abutment complex and the retained crown were embedded in a Ø 1.5 × 1.5 cm geometric matrix for evaluation of mechanical behavior of mono-ceramic CAD/CAM aluminosilicate and leucite glass crown materials. Laterally positioned axial load of 300 N was applied on the crowns. Resulting principal stresses in the mono-ceramic crowns were evaluated in relation to different glass ceramic materials. The highest compressive stresses were observed at the cervical region of the buccal aspect of the crowns and were 89.98 and 89.99 MPa, for aluminosilicate and leucite glass ceramics, respectively. The highest tensile stresses were observed at the collar of the lingual part of the crowns and were 24.54 and 25.39 MPa, respectively. Stresses induced upon 300 N static loading of CAD/CAM aluminosalicate and leucite glass ceramics are below the compressive strength of the materials. Impact loads may actuate the progress to end failure of mono-ceramic crowns supported by metallic implant abutments.

  20. Evaluation of different sterilization and disinfection methods on commercially made preformed crowns.

    Science.gov (United States)

    Yilmaz, Y; Guler, C

    2008-12-01

    The aim of this study was to evaluate the changes caused by different sterilization or disinfection methods on the vestibular surface of four commercially made preformed crowns using stereomicroscopy and scanning electron microscopy (SEM). Preformed crowns (NuSmile Primary Anterior Crown (NSC), Kinder Krowns (KK), Pedo Pearls (PP) and polycarbonate crowns (PC)) were sterilized and/or disinfected by one of the following techniques: no sterilization or disinfection (G1 control group); steam autoclaving at 134 degrees C (30 psi) for 4 min (G2); steam autoclaving at 134 degrees C (30 psi) for 12 min (G3); steam autoclaving at 121 degrees C (15 psi) for 30 min (G4); and ultrasonication in a bath containing 4% Lysetol AF for 5 min at room temperature (chemical disinfection) (G5). Scanning electron micrographs of the crowns were taken before and after their sterilization or disinfection. The changes on the vestibular surface were then scored for the presence or absence of crazing, contour alteration, fracturing, and vestibular surface changes. The data were analyzed statistically using the chi-square test. No changes were observed before and after sterilization or disinfection in the stereomicroscopic evaluation of the vestibular surface of the crowns. However, all methods in which steam autoclaving was used to sterilize the crowns caused significant (P < 0.05) crazing and contour alterations of the vestibular surface of the crowns when they were examined by SEM. Chemical disinfection using an aldehyde-free disinfectant is the preferred method of disinfection for crowns that have been used previously in other dental patients.

  1. Associations between number of consecutive night shifts and impairment of neurobehavioral performance during a subsequent simulated night shift.

    Science.gov (United States)

    Magee, Michelle; Sletten, Tracey L; Ferguson, Sally A; Grunstein, Ronald R; Anderson, Clare; Kennaway, David J; Lockley, Steven W; Rajaratnam, Shantha Mw

    2016-05-01

    This study aimed to investigate sleep and circadian phase in the relationships between neurobehavioral performance and the number of consecutive shifts worked. Thirty-four shift workers [20 men, mean age 31.8 (SD 10.9) years] worked 2-7 consecutive night shifts immediately prior to a laboratory-based, simulated night shift. For 7 days prior, participants worked their usual shift sequence, and sleep was assessed with logs and actigraphy. Participants completed a 10-minute auditory psychomotor vigilance task (PVT) at the start (~21:00 hours) and end (~07:00 hours) of the simulated night shift. Mean reaction times (RT), number of lapses and RT distribution was compared between those who worked 2-3 consecutive night shifts versus those who worked 4-7 shifts. Following 4-7 shifts, night shift workers had significantly longer mean RT at the start and end of shift, compared to those who worked 2-3 shifts. The slowest and fastest 10% RT were significantly slower at the start, but not end, of shift among participants who worked 4-7 nights. Those working 4-7 nights also demonstrated a broader RT distribution at the start and end of shift and had significantly slower RT based on cumulative distribution analysis (5 (th), 25 (th), 50 (th), 75 (th)percentiles at the start of shift; 75th percentile at the end of shift). No group differences in sleep parameters were found for 7 days and 24 hours prior to the simulated night shift. A greater number of consecutive night shifts has a negative impact on neurobehavioral performance, likely due to cognitive slowing.

  2. AHP 47: A NIGHT DATE

    Directory of Open Access Journals (Sweden)

    Phun tshogs dbang rgyal ཕུན་ཚོགས་དབང་རྒྱལ།

    2017-04-01

    Full Text Available The author was born in 1993 in Ska chung (Gaqun Village, Nyin mtha' (Ningmute Township, Rma lho (Henan Mongolian Autonomous County, Rma lho (Huangnan Tibetan Autonomous Prefecture, Mtsho sngon (Qinghai Province, PR China. Night dating was popular for teenage boys some years ago. They rode horses and yaks when they went night dating. They generally rode yaks, because horses were important for their families and used for such important tasks as pursuing bandits and going to the county town for grain and supplies. An early experience with night dating is described.

  3. Usurpation of a Crowned Lapwing Vanellus coronatus nest by ...

    African Journals Online (AJOL)

    I report an instance of usurpation of a Crowned Lapwing Vanellus coronatus nest by a pair of African Wattled Lapwings Vanellus senegalensis. The nest, which originally contained a single Crowned Lapwing egg, eventually contained an additional three Wattled Lapwing eggs, before it was predated. Although parents of ...

  4. Discover POPSCIENCE on Researchers' Night

    CERN Multimedia

    The POPSCIENCE Team

    2014-01-01

    On Friday 26 September 2014, CERN will be celebrating European Researchers' Night at three venues in Geneva and St. Genis-Pouilly. Inspired by Andy Warhol, this year's theme is “Pop science is for everyone”.     Every year, on the last Friday of September, the European Researchers’ Night takes place in about 300 cities all over Europe, with funding from the EU, to promote research and highlight researchers in engaging and fun ways for the general public. Andy Warhol said, “Pop art is for everyone”. This year, “Pop science is for everyone” is the motto of the Researchers’ Night event organised by CERN and its partners*. The night will offer everyone the opportunity to learn about the latest discoveries in physics and cosmology through poetry, theatre and music. This will be in addition to the event's traditional activities for the general public. To attract new audiences,...

  5. Canopy Fuel Load Mapping of Mediterranean Pine Sites Based on Individual Tree-Crown Delineation

    Directory of Open Access Journals (Sweden)

    Giorgos Mallinis

    2013-12-01

    Full Text Available This study presents an individual tree-crown-based approach for canopy fuel load estimation and mapping in two Mediterranean pine stands. Based on destructive sampling, an allometric equation was developed for the estimation of crown fuel weight considering only pine crown width, a tree characteristic that can be estimated from passive imagery. Two high resolution images were used originally for discriminating Aleppo and Calabrian pines crown regions through a geographic object based image analysis approach. Subsequently, the crown region images were segmented using a watershed segmentation algorithm and crown width was extracted. The overall accuracy of the tree crown isolation expressed through a perfect match between the reference and the delineated crowns was 34.00% for the Kassandra site and 48.11% for the Thessaloniki site, while the coefficient of determination between the ground measured and the satellite extracted crown width was 0.5. Canopy fuel load values estimated in the current study presented mean values from 1.29 ± 0.6 to 1.65 ± 0.7 kg/m2 similar to other conifers worldwide. Despite the modest accuracies attained in this first study of individual tree crown fuel load mapping, the combination of the allometric equations with satellite-based extracted crown width information, can contribute to the spatially explicit mapping of canopy fuel load in Mediterranean areas. These maps can be used among others in fire behavior prediction, in fuel reduction treatments prioritization and during active fire suppression.

  6. Failure analysis of various monolithic posterior aesthetic dental crowns using finite element method

    Science.gov (United States)

    Porojan, Liliana; Topală, Florin

    2017-08-01

    The aim of the study was to assess the effect of material stiffness and load on the biomechanical performance of the monolithic full-coverage posterior aesthetic dental crowns using finite element analysis. Three restorative materials for monolithic dental crowns were selected for the study: zirconia; lithium disilicate glass-ceramic, and resin-based composite. Stresses were calculated in the crowns for all materials and in the teeth structures, under different load values. The experiments show that dental crowns made from all this new aesthetic materials processed by CAD/CAM technologies would be indicated as monolithic dental crowns for posterior areas.

  7. Genome-Wide Association Mapping of Crown Rust Resistance in Oat Elite Germplasm.

    Science.gov (United States)

    Klos, Kathy Esvelt; Yimer, Belayneh A; Babiker, Ebrahiem M; Beattie, Aaron D; Bonman, J Michael; Carson, Martin L; Chong, James; Harrison, Stephen A; Ibrahim, Amir M H; Kolb, Frederic L; McCartney, Curt A; McMullen, Michael; Fetch, Jennifer Mitchell; Mohammadi, Mohsen; Murphy, J Paul; Tinker, Nicholas A

    2017-07-01

    Oat crown rust, caused by f. sp. , is a major constraint to oat ( L.) production in many parts of the world. In this first comprehensive multienvironment genome-wide association map of oat crown rust, we used 2972 single-nucleotide polymorphisms (SNPs) genotyped on 631 oat lines for association mapping of quantitative trait loci (QTL). Seedling reaction to crown rust in these lines was assessed as infection type (IT) with each of 10 crown rust isolates. Adult plant reaction was assessed in the field in a total of 10 location-years as percentage severity (SV) and as infection reaction (IR) in a 0-to-1 scale. Overall, 29 SNPs on 12 linkage groups were predictive of crown rust reaction in at least one experiment at a genome-wide level of statistical significance. The QTL identified here include those in regions previously shown to be linked with seedling resistance genes , , , , , and and also with adult-plant resistance and adaptation-related QTL. In addition, QTL on linkage groups Mrg03, Mrg08, and Mrg23 were identified in regions not previously associated with crown rust resistance. Evaluation of marker genotypes in a set of crown rust differential lines supported as the identity of . The SNPs with rare alleles associated with lower disease scores may be suitable for use in marker-assisted selection of oat lines for crown rust resistance. Copyright © 2017 Crop Science Society of America.

  8. Traffic Light Detection at Night

    DEFF Research Database (Denmark)

    Jensen, Morten Bornø; Philipsen, Mark Philip; Bahnsen, Chris

    2015-01-01

    Traffic light recognition (TLR) is an integral part of any in- telligent vehicle, it must function both at day and at night. However, the majority of TLR research is focused on day-time scenarios. In this paper we will focus on detection of traffic lights at night and evalu- ate the performance...... of three detectors based on heuristic models and one learning-based detector. Evaluation is done on night-time data from the public LISA Traffic Light Dataset. The learning-based detector out- performs the model-based detectors in both precision and recall. The learning-based detector achieves an average...

  9. Zirconia crowns for rehabilitation of decayed primary incisors: an esthetic alternative.

    Science.gov (United States)

    Ashima, G; Sarabjot, K Bhatia; Gauba, K; Mittal, H C

    2014-01-01

    Esthetic management of extensively decayed primary maxillary anterior teeth requiring full coronal coverage restoration is usually challenging to the pediatric dentists especially in very young children. Many esthetic options have been tried over the years each having its own advantages, disadvantages and associated technical, functional or esthetic limitations. Zirconia crowns have provided a treatment alternative to address the esthetic concerns and ease of placement of extra-coronal restorations on primary anterior teeth. The present article presents a case where grossly decayed maxillary primary incisors were restored esthetically and functionally with ready made zirconia crowns (ZIRKIZ, HASS Corp; Korea). After endodontic treatment the decayed teeth were restored with zirconia crowns. Over a 30 months period, the crowns have demonstrated good retention and esthetic results. Dealing with esthetic needs in children with extensive loss of tooth structure, using Zirconia crowns would be practical and successful. The treatment described is simple and effective and represents a promising alternative for rehabilitation of decayed primary teeth.

  10. Application of terrestrial laser scanning for measuring tree crown structures

    International Nuclear Information System (INIS)

    Pretzsch, H.; Seifert, S.; Huang, P.

    2011-01-01

    This paper addresses the potential of terrestrial laser scanning (TLS) for describing and modelling of tree crown structure and dynamics. We first present a general approach for the metabolic and structural scaling of tree crowns. Out of this approach we emphasize those normalization and scaling parameters which become accessible by TLS. For example we show how the individual tree leaf area index, convex hull, and its space-filling by leaves can be extracted out of laser scan data. This contributes to a theoretical and empirical substantiation of crown structure models which were missing so far for e.g. quantification of structural and species diversity in forest stands, inventory of crown biomass, species detection by remote sensing, and understanding of self- and alien-thinning in pure and mixed stands. Up to now works on this topic delivered a rather scattered empirical knowledge mainly by single inventories of trees and stands. In contrast, we recommend to start with a model approach, and to complete existing data with repeated TLS inventories in order to come to a consistent and theoretically based model of tree crowns. (author) [de

  11. Experimental investigation of the abrasive crown dynamics in orbital atherectomy.

    Science.gov (United States)

    Zheng, Yihao; Belmont, Barry; Shih, Albert J

    2016-07-01

    Orbital atherectomy is a catheter-based minimally invasive procedure to modify the plaque within atherosclerotic arteries using a diamond abrasive crown. This study was designed to investigate the crown motion and its corresponding contact force with the vessel. To this end, a transparent arterial tissue-mimicking phantom made of polyvinyl chloride was developed, a high-speed camera and image processing technique were utilized to visualize and quantitatively analyze the crown motion in the vessel phantom, and a piezoelectric dynamometer measured the forces on the phantom during the procedure. Observed under typical orbital atherectomy rotational speeds of 60,000, 90,000, and 120,000rpm in a 4.8mm caliber vessel phantom, the crown motion was a combination of high-frequency rotation at 1000, 1500, and 1660.4-1866.1Hz and low-frequency orbiting at 18, 38, and 40Hz, respectively. The measured forces were also composed of these high and low frequencies, matching well with the rotation of the eccentric crown and the associated orbital motion. The average peak force ranged from 0.1 to 0.4N at different rotational speeds. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

  12. Uniform versus asymmetric shading mediates crown recession in conifers.

    Directory of Open Access Journals (Sweden)

    Amanda L Schoonmaker

    Full Text Available In this study we explore the impact of asymmetrical vs. uniform crown shading on the mortality and growth of upper and lower branches within tree crowns, for two conifer species: shade intolerant lodgepole pine (Pinus contorta and shade tolerant white spruce (Picea glauca. We also explore xylem hydraulics, foliar nutrition, and carbohydrate status as drivers for growth and expansion of the lower and upper branches in various types of shading. This study was conducted over a two-year period across 10 regenerating forest sites dominated by lodgepole pine and white spruce, in the lower foothills of Alberta, Canada. Trees were assigned to one of four shading treatments: (1, complete uniform shading of the entire tree, (2 light asymmetric shading where the lower 1/4-1/3 of the tree crown was shaded, (3 heavy asymmetric shading as in (2 except with greater light reduction and (4 control in which no artificial shading occurred and most of the entire crown was exposed to full light. Asymmetrical shading of only the lower crown had a larger negative impact on the bud expansion and growth than did uniform shading, and the effect was stronger in pine relative to spruce. In addition, lower branches in pine also had lower carbon reserves, and reduced xylem-area specific conductivity compared to spruce. For both species, but particularly the pine, the needles of lower branches tended to store less C than upper branches in the asymmetric shade, which could suggest a movement of reserves away from the lower branches. The implications of these findings correspond with the inherent shade tolerance and self-pruning behavior of these conifers and supports a carbon based mechanism for branch mortality--mediated by an asymmetry in light exposure of the crown.

  13. Volunteers for Researchers’ Night wanted

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    Every year, on the last Friday of September, the European Researchers’ Night (see here) takes place in about 300 cities all over Europe - promoting research in engaging and fun ways for the general public. This year, CERN will be participating once again, hosting dozens of events across the Balexert shopping centre – and we’ll need YOUR help to make the celebration a success.   From film screenings and celebrity Q&A sessions to “Ask a Researcher” and build-your-own LEGO LHC events, this year’s Researchers’ Night is going to be jam-packed! The fun will kick off prior to the night itself with a mock-up of the LHC tunnel installed in the central court of the Balexert shopping centre, 8-12 September*. CERN people will be on hand to speak to shoppers about the LHC, and to encourage them to participate in Researchers’ Night! The CERN organisers are recruiting volunteers and support staff for Researchers’ ...

  14. 5 CFR 532.505 - Night shift differentials.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Night shift differentials. 532.505... PREVAILING RATE SYSTEMS Premium Pay and Differentials § 532.505 Night shift differentials. (a) Employees shall be entitled to receive night shift differentials in accordance with section 5343 of title 5...

  15. Phototaxis and polarotaxis hand in hand: night dispersal flight of aquatic insects distracted synergistically by light intensity and reflection polarization

    Science.gov (United States)

    Boda, Pál; Horváth, Gábor; Kriska, György; Blahó, Miklós; Csabai, Zoltán

    2014-05-01

    Based on an earlier observation in the field, we hypothesized that light intensity and horizontally polarized reflected light may strongly influence the flight behaviour of night-active aquatic insects. We assumed that phototaxis and polarotaxis together have a more harmful effect on the dispersal flight of these insects than they would have separately. We tested this hypothesis in a multiple-choice field experiment using horizontal test surfaces laid on the ground. We offered simultaneously the following visual stimuli for aerial aquatic insects: (1) lamplit matte black canvas inducing phototaxis alone, (2) unlit shiny black plastic sheet eliciting polarotaxis alone, (3) lamplit shiny black plastic sheet inducing simultaneously phototaxis and polarotaxis, and (4) unlit matte black canvas as a visually unattractive control. The unlit matte black canvas trapped only a negligible number (13) of water insects. The sum (16,432) of the total numbers of water beetles and bugs captured on the lamplit matte black canvas (7,922) and the unlit shiny black plastic sheet (8,510) was much smaller than the total catch (29,682) caught on the lamplit shiny black plastic sheet. This provides experimental evidence for the synergistic interaction of phototaxis (elicited by the unpolarized direct lamplight) and polarotaxis (induced by the strongly and horizontally polarized plastic-reflected light) in the investigated aquatic insects. Thus, horizontally polarizing artificial lamplit surfaces can function as an effective ecological trap due to this synergism of optical cues, especially in the urban environment.

  16. Fracture load of different crown systems on zirconia implant abutments.

    Science.gov (United States)

    Albrecht, T; Kirsten, A; Kappert, H F; Fischer, H

    2011-03-01

    The purpose of this study was to evaluate the fracture load of single zirconia abutment restorations using different veneering techniques and materials. The abutment restorations were divided into 6 groups with 20 samples each: test abutments (control group A), lithium disilicate ceramic crowns bonded on incisor abutments (group B), leucite ceramic crowns bonded on incisor abutments (group C), premolar abutments directly veneered with a fluor apatite ceramic (group D (layered) and group E (pressed)) and premolar abutments bonded with lithium disilicate ceramic crowns (group F). The fracture load of the restorations was evaluated using a universal testing machine. Half of each group was artificially aged (chewing simulation and thermocycling) before evaluating the fracture load with the exception of the test abutments. The fracture load of the test abutments was 705 ± 43N. Incisor abutments bonded with lithium disilicate or leucite ceramic crowns (groups B and C) showed fracture loads of about 580N. Premolar restorations directly veneered with fluor apatite ceramic (groups D and E) showed fracture loads of about 850N. Premolar restorations bonded with lithium disilicate ceramic crowns (group F) showed fracture loads of about 1850N. The artificial ageing showed no significant influence on the strength of the examined restorations. All ceramic crowns made of lithium disilicate glass-ceramic, adhesively bonded to premolar abutments showed the highest fracture loads in this study. However, all tested groups can withstand physiological bite forces. Copyright © 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  17. Telescopic crowns as attachments for implant supported restorations: a case series.

    Science.gov (United States)

    Hoffmann, Oliver; Beaumont, Christian; Tatakis, Dimitris N; Zafiropoulos, Gregory-George

    2006-01-01

    The use of dental implants to support mandibular or maxillary overdentures is a widely used treatment modality. Advantages are an increase in retention, an increase in chewing ability, and easy access for oral hygiene procedures. While telescopic and conical crowns have been used for decades to connect natural teeth to overdentures, not many cases have been reported in the literature of telescopic crowns placed on implants to support overdentures. This article describes 7 patients with overdentures supported by telescopic crowns who received 65 implants (ITI Straumann). The cases presented in this report have been in function for up to 4.5 years. During that time no adverse events were reported. The use of telescopic crowns as attachments for implant-supported overdentures may be a viable treatment option.

  18. Night airglow in RGB mode

    Directory of Open Access Journals (Sweden)

    Mikhalev А.V.

    2016-09-01

    Full Text Available To study dynamics of the upper atmosphere, we consider results of the night sky photometry, using a color CCD camera and taking into account the night airglow and features of its spectral composition. We use night airglow observations for 2010–2015, which have been obtained at the ISTP SB RAS Geophysical Observatory (52° N, 103° E by the camera with KODAK KAI-11002 CCD sensor. We estimate average brightness of the night sky in R, G, B channels of the color camera for eastern Siberia with typical values ranging from ~0.008 to 0.01 erg·cm–2·s–1. Besides, we determine seasonal variations in the night sky luminosities in R, G, B channels of the color camera. In these channels, luminosities decrease in spring, increase in autumn, and have a pronounced summer maximum, which can be explained by scattered light and is associated with the location of the Geophysical Observatory. We consider geophysical phenomena with their optical effects in R, G, B channels of the color camera. For some geophysical phenomena (geomagnetic storms, sudden stratospheric warmings, we demonstrate the possibility of quantitative relationship between enhanced signals in R and G channels and increases in intensities of discrete 557.7 and 630 nm emissions, which are predominant in the airglow spectrum

  19. Clinical performance - a reflection of damage accumulation in ceramic dental crowns

    Energy Technology Data Exchange (ETDEWEB)

    Rekow, D.E. [Univ. of Medicine and Dentistry of New Jersey, Newark, NJ (United States). Dept. of Orthodontics; Thompson, V.P. [Univ. of Medicine and Dentistry of New Jersey, Newark, NJ (United States). New Jersey Dental School

    2001-07-01

    All-ceramic dental crowns have tremendous appeal for patients - their esthetics nearly match those of natural teeth. Unfortunately, the most esthetic materials are brittle and, consequently, are vulnerable to damage relating to shaping which is exacerbated during cyclic loading during normal chewing. Clinical performance of all-ceramic dental prostheses are directly dependent on damage introduced during fabrication and during fatigue loading associated with function. The accumulation of damage results in unacceptably high failure rates (where failure is defined as a complete fracture requiring replacement of the prosthesis). The relation between shaping damage and fatigue damage on clinical performance of all-ceramic dental crowns was investigated. Materials used commercially for all-ceramic crowns and investigated in this study included a series of different microstructures of machinable glass ceramics (Corning), aluminas and porcelains (Vita Zahnfabrik), and zirconia (Norton). As monolithic materials, strong, tough, fatigue-resistant materials are not sufficiently esthetic for crowns. Crowns fabricated from monolithic esthetic materials have high failure rates. Layering ceramics could provide acceptable strength through management of damage accumulation. (orig.)

  20. Effects of crown release on growth and quality of even-aged red maple stands

    Science.gov (United States)

    Terry F. Strong; Audra E. Hubbell; Adam H. Weise; Gayne G. Erdmann

    2006-01-01

    The effects of six crown-release treatments on growth and bole quality of 54 dominant, codominant, and intermediate red maples (Acer rubrum L.) were examined in an even-aged stand in upper Michigan. Treatments included an unreleased control, a single-tree and a two-tree crown release, and a full crown-to-crown release of 5, 10, and 15ft. Twenty-two...

  1. [Comparative adaptation of crowns of selective laser melting and wax-lost-casting method].

    Science.gov (United States)

    Li, Guo-qiang; Shen, Qing-yi; Gao, Jian-hua; Wu, Xue-ying; Chen, Li; Dai, Wen-an

    2012-07-01

    To investigate the marginal adaptation of crowns fabricated by selective laser melting (SLM) and wax-lost-casting method, so as to provide an experimental basis for clinic. Co-Cr alloy full crown were fabricated by SLM and wax-lost-casting for 24 samples in each group. All crowns were cemented with zinc phosphate cement and cut along longitudinal axis by line cutting machine. The gap between crown tissue surface and die was measured by 6-point measuring method with scanning electron microscope (SEM). The marginal adaptation of crowns fabricated by SLM and wax-lost-casting were compared statistically. The gap between SLM crowns were (36.51 ± 2.94), (49.36 ± 3.31), (56.48 ± 3.35), (42.20 ± 3.60) µm, and wax-lost-casting crowns were (68.86 ± 5.41), (58.86 ± 6.10), (70.62 ± 5.79), (69.90 ± 6.00) µm. There were significant difference between two groups (P casting method and SLM method provide acceptable marginal adaptation in clinic, and the marginal adaptation of SLM is better than that of wax-lost-casting method.

  2. The general properties of water - nitrobenzene - crown - bis-1,2-dicarbollylcobaltate extraction systems

    International Nuclear Information System (INIS)

    Vanura, P.

    2003-01-01

    The extraction and stability constants in the system water - nitrobenzene have been collected and general rules valid for water - nitrobenzene - crown - bis-1,2-dicarbollylcobaltate extraction system have been found. The main principles are size compatibility of ion diameter and crown cavity diameters, the flexibility of crown, the basicity of crown and the steric factor of both the ligand and the extracted ion. The extraction in the system water - mineral acid or salt polyoxyethylene compound - bis-1,2-dicarbollylcobaltate - nitrobenzene is more complicated than can be expected from usually used ion diameter - crown cavity diameter compatibility principle. The other important factors are the basicity and the deformability of crown, steric aspect and the angles of bonds of extracted ion. The binuclear 'sandwich' complexes with H + ion and Sr 2+ or Ba 2+ ions have been proved for dibenzo-18-crown-6 (DB18C6). On the other hand, only SrL 2 and BaL 2 (L = 15C5) complexes are formed in nitrobenzene saturated with water. The addition of polyoxyethylene compound usually increases the distribution ratio of alkali earth metal ions and the selectivity of its mutual separation. (authors)

  3. Fit of interim crowns fabricated using photopolymer-jetting 3D printing.

    Science.gov (United States)

    Mai, Hang-Nga; Lee, Kyu-Bok; Lee, Du-Hyeong

    2017-08-01

    The fit of interim crowns fabricated using 3-dimensional (3D) printing is unknown. The purpose of this in vitro study was to evaluate the fit of interim crowns fabricated using photopolymer-jetting 3D printing and to compare it with that of milling and compression molding methods. Twelve study models were fabricated by making an impression of a metal master model of the mandibular first molar. On each study model, interim crowns (N=36) were fabricated using compression molding (molding group, n=12), milling (milling group, n=12), and 3D polymer-jetting methods. The crowns were prepared as follows: molding group, overimpression technique; milling group, a 5-axis dental milling machine; and polymer-jetting group using a 3D printer. The fit of interim crowns was evaluated in the proximal, marginal, internal axial, and internal occlusal regions by using the image-superimposition and silicone-replica techniques. The Mann-Whitney U test and Kruskal-Wallis tests were used to compare the results among groups (α=.05). Compared with the molding group, the milling and polymer-jetting groups showed more accurate results in the proximal and marginal regions (P3D printing significantly enhanced the fit of interim crowns, particularly in the occlusal region. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  4. Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns.

    Science.gov (United States)

    Abdullah, Adil Othman; Tsitrou, Effrosyni A; Pollington, Sarah

    2016-01-01

    This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone "PEEK", Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (PCAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p0.05). CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

  5. Fracture strength testing of crowns made of CAD/CAM composite resins.

    Science.gov (United States)

    Okada, Ryota; Asakura, Masaki; Ando, Akihiro; Kumano, Hirokazu; Ban, Seiji; Kawai, Tatsushi; Takebe, Jun

    2018-03-28

    The purpose of this study was to ascertain whether computer aided design/computer aided manufacturing (CAD/CAM) composite resin crowns have sufficient strength to withstand the bite force of the molar teeth. The null hypothesis was that the fracture strength of CAD/CAM composite resin crowns is lower than the average maximum bite force of the molar tooth. The crowns, which shape is the right maxillary first molar, were fabricated using four CAD/CAM blanks made of composite resins (Block HC: HC, KZR-CAD HR: HR, KZR-CAD HR2: HR2, Avencia Block: AVE) and one CAD/CAM blank made of lithium disilicate glass-ceramic (IPS e.max CAD: IPS), which was used as a control. Fracture strength of fabricated crowns bonded to metal abutment and biaxial flexural strength of the materials were evaluated. The results of fracture strength test and biaxial flexural strength test showed different tendencies. The fracture strength of CAD/CAM composite resin crowns except HC ranged from 3.3kN to 3.9kN, and was similar to that of IPS (3.3kN). In contrast, biaxial flexural strength of CAD/CAM composite resins ranged from 175MPa to 247MPa, and was significantly lower than that of IPS (360MPa). All CAD/CAM composite resin crowns studied presented about 3-4 times higher fracture strength than the average maximum bite force of the molar tooth (700-900N), which result leads to the conclusion that CAD/CAM composite resin crowns would have sufficient strength to withstand the bite force of the molar teeth. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  6. Menstrual characteristics and night work among nurses.

    Science.gov (United States)

    Moen, Bente E; Baste, Valborg; Morken, Tone; Alsaker, Kjersti; Pallesen, Ståle; Bjorvatn, Bjørn

    2015-01-01

    Night work has been associated with adverse effects in terms of reproductive health. Specifically, menstruation has been suggested to be negatively impacted by night work, which again may influence fertility. This study investigated whether working nights is related to menstrual characteristics and if there is a relationship between shift work disorder (SWD) and menstruation. The study was cross-sectional, response rate 38%. The sample comprised female nurses who were members of the Norwegian Nurses Association; below 50 yr of age, who were not pregnant, did not use hormonal pills or intrauterine devices and who had not reached menopause (n=766). The nurses answered a postal survey including questions about night work and menstrual characteristics. Fifteen per cent reported to have irregular menstruations. Thirty-nine per cent of the nurses were classified as having SWD. Logistic regression analyses concerning the relationship between irregular menstruations and night work did not show any associations. Furthermore, no associations were found between cycle length or bleeding period and night work parameters. No associations were found between menstrual characteristics and SWD.

  7. Radium separation through complexation by aqueous crown ethers and ion exchange or solvent extraction

    Energy Technology Data Exchange (ETDEWEB)

    Chiarizia, R.; Dietz, M.L.; Horwitz, E.P. [Argonne National Lab., IL (United States). Chemistry Div.; Burnett, W.C. [Florida State Univ., Tallahassee, FL (United States). Dept. of Oceanography

    1997-11-01

    The effect of three water-soluble, unsubstituted crown ethers (15-crown-5 (15C5), 18-crown-6 (18C6) and 21-crown-7 (21C7)) on the uptake of Ca, Sr, Ba and Ra cations by a sulfonic acid cation exchange resin, and on the extraction of the same cations by xylene solutions of dinonylnaphthalenesulfonic acid (HDNNS) from aqueous hydrochloric acid solutions has been investigated. The crown ethers enhance the sorption of the larger cations by the ion exchange resin, thereby improving the resin selectivity over calcium, a result of a synergistic interaction between the crown ether and the ionic functional groups of the resin. Similarly, the extraction of the larger alkaline earth cations into xylene by HDNNS is strongly synergized by the presence of the crown ethers in the aqueous phase. Promising results for intra-Group IIa cation separations have been obtained using each of the three crown ethers as the aqueous ligands and the sulfonic acid cation exchange resin. Even greater separation factors for the radium-calcium couple have been measured with the crown-ethers and HDNNS solutions in the solvent extraction mode. The application of the uptake and extraction results to the development of radium separation schemes is discussed and a possible flowchart for the determination of {sup 226}Ra/{sup 228}Ra in natural waters is presented.

  8. Influence of coping design on the cervical color of ceramic crowns.

    Science.gov (United States)

    Paniz, Gianluca; Kang, Ki-Ho; Kim, Yongjeong; Kumagai, Naota; Hirayama, Hiroshi

    2013-12-01

    The replication of natural teeth, especially with single-tooth restorations, represents a challenge. Similar to metal ceramic crowns, different designs of zirconia substructures have been suggested to improve the esthetic results of zirconia ceramic crowns. The purpose of the study was to analyze the color of the cervical portion of single zirconia ceramic crowns fabricated with different zirconia coping designs. The color, measured on the CIELAB color scale, of 3 different groups of restorations (n=10) fabricated with zirconia coping (Lava) and feldspathic porcelain (Noritake Super Porcelain) was analyzed with a spectrophotometer. Conventional zirconia crowns with zirconia facial margins were compared with ceramic crowns with porcelain facial margins and either a horizontal reduction of the zirconia coping (1.0 mm reduction) or an additional vertical reduction (1.0 mm additional reduction). The 3 groups, each with a different coping extension, were examined with a 1-way ANOVA and the Fisher exact test, and the differences of the groups were evaluated by applying ΔE thresholds (α=.05). The mean color difference among all the groups was not clinically significant (ΔEcolor differences were present between the 2 porcelain butt margin groups of crowns (ΔE=1.06, between group H and V). Increased differences were present between the zirconia margin group and the porcelain butt margin group (ΔE=2.54 between group C and H; ΔE=2.41 between group C and V). Lab* values were examined in all the groups of crowns to determine the clinical implications. Within the limitation of the study, no significant differences were present among the tested groups of crowns. Nevertheless, although some differences were present between the zirconia margin group and the porcelain butt margin group, reduced differences were present between the 2 different cutback designs. Copyright © 2013 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights

  9. Absorption infrared spectra of interaction products of cyclic polyethers 18-crown-6 and dibenzo-18-crown-6 with uranyl dinitrate hexahydrate

    International Nuclear Information System (INIS)

    Chumaevskij, N.A.; Belomestnykh, V.I.; Razgonyaeva, G.A.; Shabel'nik, K.S.; Afanas'eva, E.E.

    1988-01-01

    Using the method of IR spectroscopy it is established that during interaction of uranyl nitrate hexahydrate (UNH) with crown-ethers under investigation macrocycles adhere to UO 2 2+ via hydrogen bonds between water molecules and oxygen of polyethers. Interaction of UNH with the above-mentioned crowns leads to conformational rearrangement of cycles of polyethers and improvement of their symmetry, reflecting in noticeable simplification of IR spectra of interaction products as compared to spectra of initial cyclic polyethers

  10. Numerical modeling of laboratory-scale surface-to-crown fire transition

    Science.gov (United States)

    Castle, Drew Clayton

    Understanding the conditions leading to the transition of fire spread from a surface fuel to an elevated (crown) fuel is critical to effective fire risk assessment and management. Surface fires that successfully transition to crown fires can be very difficult to suppress, potentially leading to damages in the natural and built environments. This is relevant to chaparral shrub lands which are common throughout parts of the Southwest U.S. and represent a significant part of the wildland urban interface. The ability of the Wildland-Urban Interface Fire Dynamic Simulator (WFDS) to model surface-to-crown fire transition was evaluated through comparison to laboratory experiments. The WFDS model is being developed by the U.S. Forest Service (USFS) and the National Institute of Standards and Technology. The experiments were conducted at the USFS Forest Fire Laboratory in Riverside, California. The experiments measured the ignition of chamise (Adenostoma fasciculatum) crown fuel held above a surface fire spreading through excelsior fuel. Cases with different crown fuel bulk densities, crown fuel base heights, and imposed wind speeds were considered. Cold-flow simulations yielded wind speed profiles that closely matched the experimental measurements. Next, fire simulations with only the surface fuel were conducted to verify the rate of spread while factors such as substrate properties were varied. Finally, simulations with both a surface fuel and a crown fuel were completed. Examination of specific surface fire characteristics (rate of spread, flame angle, etc.) and the corresponding experimental surface fire behavior provided a basis for comparison of the factors most responsible for transition from a surface fire to the raised fuel ignition. The rate of spread was determined by tracking the flame in the Smokeview animations using a tool developed for tracking an actual flame in a video. WFDS simulations produced results in both surface fire spread and raised fuel bed

  11. Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments.

    Science.gov (United States)

    Santing, Hendrik Jacob; Meijer, Henny J A; Raghoebar, Gerry M; Özcan, Mutlu

    2012-12-01

    Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. The objectives of this study were to evaluate the fracture strength of implant-supported composite resin crowns on PEEK and solid titanium temporary abutments, and to analyze the failure types. Three types of provisional abutments, RN synOcta Temporary Meso Abutment (PEEK; Straumann), RN synOcta Titanium Post for Temporary Restorations (Straumann), and Temporary Abutment Engaging NobRplRP (Nobel Biocare) were used, and provisional screw-retained crowns using composite resin (Solidex) were fabricated for four different locations in the maxilla. The specimens were tested in a universal testing machine at a crosshead speed of 1 mm/minute until fracture occurred. The failure types were analyzed and further categorized as irreparable (Type 1) or reparable (Type 2). No significant difference was found between different abutment types. Only for the position of the maxillary central incisor, composite resin crowns on PEEK temporary abutments showed significantly lower (p Provisional crowns on PEEK abutments showed similar fracture strength as titanium temporary abutments except for central incisors. Maxillary right central incisor composite resin crowns on PEEK temporary abutments fractured below the mean anterior masticatory loading forces reported to be approximately 206 N. © 2010 Wiley Periodicals, Inc.

  12. Crown-Level Tree Species Classification Using Integrated Airborne Hyperspectral and LIDAR Remote Sensing Data

    Science.gov (United States)

    Wang, Z.; Wu, J.; Wang, Y.; Kong, X.; Bao, H.; Ni, Y.; Ma, L.; Jin, J.

    2018-05-01

    Mapping tree species is essential for sustainable planning as well as to improve our understanding of the role of different trees as different ecological service. However, crown-level tree species automatic classification is a challenging task due to the spectral similarity among diversified tree species, fine-scale spatial variation, shadow, and underlying objects within a crown. Advanced remote sensing data such as airborne Light Detection and Ranging (LiDAR) and hyperspectral imagery offer a great potential opportunity to derive crown spectral, structure and canopy physiological information at the individual crown scale, which can be useful for mapping tree species. In this paper, an innovative approach was developed for tree species classification at the crown level. The method utilized LiDAR data for individual tree crown delineation and morphological structure extraction, and Compact Airborne Spectrographic Imager (CASI) hyperspectral imagery for pure crown-scale spectral extraction. Specifically, four steps were include: 1) A weighted mean filtering method was developed to improve the accuracy of the smoothed Canopy Height Model (CHM) derived from LiDAR data; 2) The marker-controlled watershed segmentation algorithm was, therefore, also employed to delineate the tree-level canopy from the CHM image in this study, and then individual tree height and tree crown were calculated according to the delineated crown; 3) Spectral features within 3 × 3 neighborhood regions centered on the treetops detected by the treetop detection algorithm were derived from the spectrally normalized CASI imagery; 4) The shape characteristics related to their crown diameters and heights were established, and different crown-level tree species were classified using the combination of spectral and shape characteristics. Analysis of results suggests that the developed classification strategy in this paper (OA = 85.12 %, Kc = 0.90) performed better than LiDAR-metrics method (OA = 79

  13. Surface topography of two trematodes parasites infecting grey heron Ardea cinerea Jouyi (Aves, Ciconiiformes) in Qena, Egypt.

    Science.gov (United States)

    Ammar, Khalaf Nour Abd El-Wahed

    2015-04-01

    Apharyngostrigea ardeolina and Echinoparyphium recurvatum are two important digenean parasites that were recovered from small intestine of grey heron with an infection rate (16.2%) and (8.8%) respectively. The surface topography of two species was redescribed by both light and scanning electron microscopy. Using SEM studies showed that the body surface of two trematodes were covered by contact receptors, several types of sensory tegumental papillae which may have useful function in orientation and feeding through increasing the surface area of absorption, could also play a role in sensation or in selection of the materials for ingestion by the fluke. The head collar of E. recurvatum is reniform in shape, bearing uninterrupted double row of 41 collar finger-like spines, a total including 4 end group ones on both ventral corners., tegumental spines were tongue-shaped without a terminal tip.

  14. Hot Flashes amd Night Sweats (PDQ)

    Science.gov (United States)

    ... Professionals Questions to Ask about Your Treatment Research Hot Flashes and Night Sweats (PDQ®)–Patient Version Overview ... quality of life in many patients with cancer. Hot flashes and night sweats may be side effects ...

  15. Investigating assumptions of crown archetypes for modelling LiDAR returns

    NARCIS (Netherlands)

    Calders, K.; Lewis, P.; Disney, M.; Verbesselt, J.; Herold, M.

    2013-01-01

    LiDAR has the potential to derive canopy structural information such as tree height and leaf area index (LAI), via models of the LiDAR signal. Such models often make assumptions regarding crown shape to simplify parameter retrieval and crown archetypes are typically assumed to contain a turbid

  16. The night sky brightness at McDonald Observatory

    Science.gov (United States)

    Kalinowski, J. K.; Roosen, R. G.; Brandt, J. C.

    1975-01-01

    Baseline observations of the night sky brightness in B and V are presented for McDonald Observatory. In agreement with earlier work by Elvey and Rudnick (1937) and Elvey (1943), significant night-to-night and same-night variations in sky brightness are found. Possible causes for these variations are discussed. The largest variation in sky brightness found during a single night is approximately a factor of two, a value which corresponds to a factor-of-four variation in airglow brightness. The data are used to comment on the accuracy of previously published surface photometry of M 81.

  17. Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study.

    Science.gov (United States)

    Sjögren, G; Lantto, R; Granberg, A; Sundström, B O; Tillberg, A

    1999-01-01

    The purpose of this study was to retrospectively evaluate leucite reinforced-glass ceramic crowns (Empress) placed in patients who regularly visit general practices. One hundred ten Empress crowns, placed in 29 patients who visited a general practice on a regular basis, were evaluated according to the California Dental Association's (CDA) quality evaluation system. In addition, the occurrence of plaque and certain gingival conditions was evaluated. All crowns were luted with resin composite cement. The mean and median years in function for the crowns were 3.6 and 3.9 years, respectively. Based on the CDA criteria, 92% of the 110 crowns were rated "satisfactory." Eighty-six percent were given the CDA rating "excellent" for margin integrity. Fracture was registered in 6% of the 110 crowns. Of the remaining 103 crowns, the CDA rating excellent was given to 74% for anatomic form, 86% for color, and 90% for surface. No significant differences (P > 0.05) were observed regarding fracture rates between anterior and posterior crowns. With regard to the occurrence of plaque and bleeding on probing, no significant differences (P > 0.05) were observed between the Empress crowns and the controls. Most of the fractured crowns had been placed on molars or premolars. Although the difference between anterior and posterior teeth was not statistically significant with respect to the fracture rates obtained, the number of fractured crowns placed on posterior teeth exceeded that of those placed on anterior teeth. The difference between the fracture rates may have clinical significance, and the risk of fracture has to be taken into consideration when placing crowns on teeth that are likely to be subjected to high stress levels.

  18. Modelling initial mortality of Abies religiosa in a crown fire in Mexico

    Directory of Open Access Journals (Sweden)

    Salomé Temiño-Villota

    2016-04-01

    Full Text Available Aim of study: The objectives of this work were to determine which morphological and fire severity variables may help explain the mortality of adult Abies religiosa (Kunth Schltdl. & Cham., to model the probability of this species after being affected by crown fire, and to obtain more elements to classify the sacred fir in terms of fire resistance. This type of studies are relevant to estimate the impact of crown fires on the climax forests that forms this species.Area of study: The burned forest was located in the southern Mexico City, borough.Material and methods: Morphological variables and fire severity indicators were collected for 335 Abies religiosa trees burned by a mixed severity fire. Logistic regression was used to analyze data and develop models that best explained tree mortality.Main results: Survival was 26.9%. The models for height (p≤0.0001, diameter at breast height (p=0.0082, crown length (p≤0.0001 and crown base height (p≤0.0001 were significant, with a negative relationship between each one of these variables and probability of mortality. The significant severity variables were lethal scorch height (p≤0.0001 and crown kill (p≤ 0.0001, which have a direct relationship with probability of mortality.Highlights: This species is moderately fire-resistant. Crown kill ≥ 70% markedly increases mortality. Silvicultural activities such as pruning, thinning and fuel management can reduce the risk of crown fires.

  19. Modelling initial mortality of Abies religiosa in a crown fire in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Temiño-Villota, S.; Rodríguez-Trejo, D.A.; Molina Terrén, D.M.; Ryan, K.

    2016-07-01

    Aim of the study: The objectives of this work were to determine which morphological and fire severity variables may help explain the mortality of adult Abies religiosa (Kunth) Schltdl. & Cham., to model the probability of this species after being affected by crown fire, and to obtain more elements to classify the sacred fir in terms of fire resistance. This type of studies are relevant to estimate the impact of crown fires on the climax forests that forms this species. Area of study: The burned forest was located in the southern Mexico City, borough. Material and methods: Morphological variables and fire severity indicators were collected for 335 Abies religiosa trees burned by a mixed severity fire. Logistic regression was used to analyze data and develop models that best explained tree mortality. Main results: Survival was 26.9%. The models for height (p≤0.0001), diameter at breast height (p=0.0082), crown length (p≤0.0001) and crown base height (p≤0.0001) were significant, with a negative relationship between each one of these variables and probability of mortality. The significant severity variables were lethal scorch height (p≤0.0001) and crown kill (p≤ 0.0001), which have a direct relationship with probability of mortality. Highlights: This species is moderately fire-resistant. Crown kill ≥ 70% markedly increases mortality. Silvicultural activities such as pruning, thinning and fuel management can reduce the risk of crown fires. (Author)

  20. Unique case of a geminated supernumerary tooth with trifid crown

    International Nuclear Information System (INIS)

    Ather, Amber; Ather, Hunaiza; Sheth, Sanket Milan; Muliya, Vidya Saraswathi

    2012-01-01

    Gemination, a relatively uncommon dental anomaly, is characterized by its peculiar representation as a tooth with a bifid crown and a common root and root canal. It usually occurs in primary dentition. To come across gemination in a supernumerary tooth is a rare phenomenon. The purpose of this paper is to present a unique case of hyperdontia wherein gemination in an impacted supernumerary tooth resulted in a trifid crown unlike the usual bifid crown. The role of conventional radiographs as well as computed tomography, to accurately determine the morphology and spatial location, and to arrive at a diagnosis, is also emphasized in this paper.

  1. Treatment Recommendations for Single-Unit Crowns: Findings from The National Dental Practice-Based Research Network

    Science.gov (United States)

    McCracken, Michael S.; Louis, David R.; Litaker, Mark S.; Minyé, Helena M.; Mungia, Rahma; Gordan, Valeria V.; Marshall, Don G.; Gilbert, Gregg H.

    2016-01-01

    Background Objectives were to: (1) quantify practitioner variation in likelihood to recommend a crown; and (2) test whether certain dentist, practice, and clinical factors are significantly associated with this likelihood. Methods Dentists in the National Dental Practice-Based Research Network completed a questionnaire about indications for single-unit crowns. In four clinical scenarios, practitioners ranked their likelihood of recommending a single-unit crown. These responses were used to calculate a dentist-specific “Crown Factor” (CF; range 0–12). A higher score implies a higher likelihood to recommend a crown. Certain characteristics were tested for statistically significant associations with the CF. Results 1,777 of 2,132 eligible dentists responded (83%). Practitioners were most likely to recommend crowns for teeth that were fractured, cracked, endodontically-treated, or had a broken restoration. Practitioners overwhelmingly recommended crowns for posterior teeth treated endodontically (94%). Practice owners, Southwest practitioners, and practitioners with a balanced work load were more likely to recommend crowns, as were practitioners who use optical scanners for digital impressions. Conclusions There is substantial variation in the likelihood of recommending a crown. While consensus exists in some areas (posterior endodontic treatment), variation dominates in others (size of an existing restoration). Recommendations varied by type of practice, network region, practice busyness, patient insurance status, and use of optical scanners. Practical Implications Recommendations for crowns may be influenced by factors unrelated to tooth and patient variables. A concern for tooth fracture -- whether from endodontic treatment, fractured teeth, or large restorations -- prompted many clinicians to recommend crowns. PMID:27492046

  2. Stress and Reliability Analysis of a Metal-Ceramic Dental Crown

    Science.gov (United States)

    Anusavice, Kenneth J; Sokolowski, Todd M.; Hojjatie, Barry; Nemeth, Noel N.

    1996-01-01

    Interaction of mechanical and thermal stresses with the flaws and microcracks within the ceramic region of metal-ceramic dental crowns can result in catastrophic or delayed failure of these restorations. The objective of this study was to determine the combined influence of induced functional stresses and pre-existing flaws and microcracks on the time-dependent probability of failure of a metal-ceramic molar crown. A three-dimensional finite element model of a porcelain fused-to-metal (PFM) molar crown was developed using the ANSYS finite element program. The crown consisted of a body porcelain, opaque porcelain, and a metal substrate. The model had a 300 Newton load applied perpendicular to one cusp, a load of 30ON applied at 30 degrees from the perpendicular load case, directed toward the center, and a 600 Newton vertical load. Ceramic specimens were subjected to a biaxial flexure test and the load-to-failure of each specimen was measured. The results of the finite element stress analysis and the flexure tests were incorporated in the NASA developed CARES/LIFE program to determine the Weibull and fatigue parameters and time-dependent fracture reliability of the PFM crown. CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/Or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program.

  3. Crown sealing and buckling instability during water entry of spheres

    KAUST Repository

    Marston, J. O.

    2016-04-05

    We present new observations from an experimental investigation of the classical problem of the crown splash and sealing phenomena observed during the impact of spheres onto quiescent liquid pools. In the experiments, a 6 m tall vacuum chamber was used to provide the required ambient conditions from atmospheric pressure down to of an atmosphere, whilst high-speed videography was exploited to focus primarily on the above-surface crown formation and ensuing dynamics, paying particular attention to the moments just prior to the surface seal. In doing so, we have observed a buckling-type azimuthal instability of the crown. This instability is characterised by vertical striations along the crown, between which thin films form that are more susceptible to the air flow and thus are drawn into the closing cavity, where they atomize to form a fine spray within the cavity. To elucidate to the primary mechanisms and forces at play, we varied the sphere diameter, liquid properties and ambient pressure. Furthermore, a comparison between the entry of room-temperature spheres, where the contact line pins around the equator, and Leidenfrost spheres (i.e. an immersed superheated sphere encompassed by a vapour layer), where there is no contact line, indicates that the buckling instability appears in all crown sealing events, but is intensified by the presence of a pinned contact line. © 2016 Cambridge University Press.

  4. Biology and control of the raspberry crown borer (Lepidoptera: Sesiidae).

    Science.gov (United States)

    McKern, Jacquelyn A; Johnson, Donn T; Lewis, Barbara A

    2007-04-01

    This study explored the biology of raspberry crown borer, Pennisetia marginata (Harris) (Lepidoptera: Sesiidae), in Arkansas and the optimum timing for insecticide and nematode applications. The duration of P. marginata's life cycle was observed to be 1 yr in Arkansas. Insecticide trials revealed that bifenthrin, chlorpyrifos, imidacloprid, metaflumizone, and metofluthrin efficacy were comparable with that of azinphosmethyl, the only labeled insecticide for P. marginata in brambles until 2005. Applications on 23 October 2003 for plots treated with bifenthrin, chlorpyrifos, and azinphosmethyl resulted in >88% reduction in larvae per crown. Applications on 3 November 2004 of metaflumizone, metofluthrin, and bifenthrin resulted in >89% reduction in larvae per crown. Applications on 7 April 2005 for metofluthrin, imidacloprid, bifenthrin, metaflumizone, and benzoylphenyl urea resulted in >64% reduction in the number of larvae per crown. Applications on 6 May 2004 did not reduce larval numbers. The optimum timing for treatments was found to be between October and early April, before the larvae tunneled into the crowns of plants. Applying bifenthrin with as little as 468 liters water/ha (50 gal/acre) was found to be as effective against larvae as higher volumes of spray. Nematode applications were less successful than insecticides. Nematode applications of Steinernemafeltiae, Steinernema carpocapsae, and Heterorhabditis bacteriophora reduced larvae counts per plant by 46, 53, and 33%, respectively.

  5. An in-vitro investigation of the accuracy of fit of Procera and Empress crowns.

    Science.gov (United States)

    Fleming, Garry J R; Dobinson, Marie M; Landini, Gabriel; Harris, Jonathan J

    2005-09-01

    The current study aimed to investigate the accuracy of fit and the reproducibility of inner crown profile for two types of high strength ceramics, IPS Empress and Procera. Procera and Empress crowns with four different morphologies were cemented to dies using zinc phosphate dental cement. Vertical and horizontal sections were made through each of the crown/die preparations and images of the vertical sections were compared for curvature reproduction by alignment using image processing. Measurements were made on horizontal sections to determine cement layer thickness. Alignment of the crowns using image analysis identified quantifiable variations in the inner surface profile compared with the outer surface of the die. The largest differences occurred from the cusp tips to the occlusal adaptation area and differences in surface profile were less pronounced for Procera than Empress crowns. Marginal gap varied independently of ceramic or internal crown shape from 7-529 microm for Procera and 26-548 microm for Empress. IPS Empress has a superior ability to reproduce the inner surface profile of the crown morphologies investigated compared with Procera. The reduced reproduction of surface profile was associated with an increased cement thickness at the occlusal contact area that may inadvertently lead to failure of the crowns functional characteristics.

  6. The aesthetic treatment for anterior teeth with lost crown by endorestoration

    Directory of Open Access Journals (Sweden)

    Nanik Zubaidah

    2009-06-01

    Full Text Available Background: The aesthetic has an important role in social life, especially the anterior teeth. The aesthetic abnormality of anterior teeth i.e. discoloration, malpotition or the anterior teeth with crown damage for more than one third or all part of crown is lost due to caries or other causes, will influence its appearance especially during smile. Purpose: The aim of this case report, therefore, is to show how teeth with clinical crown lost or only the root left still can be treated by endorestoration treatment in order to reconstruct the shape and function of the teeth similar to the original ones. Case: Female 52 years old with the lost crown of anterior teeth. The patient did not want her teeth to be extracted. Case Management: The abnormality of these teeth are still able to be reconstructed by endorestoration i.e. endodontic treatment with post and core insertion in the root canal will increase its retention and recovery by the porcelain crown fused to metal to recover the original formation and aesthetic and thus has the normal refunction. The treatment, it improve the confidence of the patient, and also can function normally. The patient did not feel pain. Ronsenography showed the periapical lesion diminished, the neighbor gingival was going better in both function and color. Conclusion: Endorestoration treatment on the anterior teeth with lost crown could recover the normal function, dental aesthetic and self confidence.

  7. DNA methylation mediated control of gene expression is critical for development of crown gall tumors.

    Directory of Open Access Journals (Sweden)

    Jochen Gohlke

    Full Text Available Crown gall tumors develop after integration of the T-DNA of virulent Agrobacterium tumefaciens strains into the plant genome. Expression of the T-DNA-encoded oncogenes triggers proliferation and differentiation of transformed plant cells. Crown gall development is known to be accompanied by global changes in transcription, metabolite levels, and physiological processes. High levels of abscisic acid (ABA in crown galls regulate expression of drought stress responsive genes and mediate drought stress acclimation, which is essential for wild-type-like tumor growth. An impact of epigenetic processes such as DNA methylation on crown gall development has been suggested; however, it has not yet been investigated comprehensively. In this study, the methylation pattern of Arabidopsis thaliana crown galls was analyzed on a genome-wide scale as well as at the single gene level. Bisulfite sequencing analysis revealed that the oncogenes Ipt, IaaH, and IaaM were unmethylated in crown galls. Nevertheless, the oncogenes were susceptible to siRNA-mediated methylation, which inhibited their expression and subsequently crown gall growth. Genome arrays, hybridized with methylated DNA obtained by immunoprecipitation, revealed a globally hypermethylated crown gall genome, while promoters were rather hypomethylated. Mutants with reduced non-CG methylation developed larger tumors than the wild-type controls, indicating that hypermethylation inhibits plant tumor growth. The differential methylation pattern of crown galls and the stem tissue from which they originate correlated with transcriptional changes. Genes known to be transcriptionally inhibited by ABA and methylated in crown galls became promoter methylated upon treatment of A. thaliana with ABA. This suggests that the high ABA levels in crown galls may mediate DNA methylation and regulate expression of genes involved in drought stress protection. In summary, our studies provide evidence that epigenetic processes

  8. The influence of climate variability on numbers of three waterbird species in Western Port, Victoria, 1973 2002

    Science.gov (United States)

    Chambers, Lynda E.; Loyn, Richard H.

    2006-05-01

    Seasonal and annual movements of Australian waterbirds are generally more complex than those of their Northern Hemisphere counterparts, and long-term data are needed to understand their relationships with climatic variables. This paper explores a long-term (1973 2002) set of waterbird counts from coastal Victoria and relates them to climatic data at local and continental scales. Three species (Black Swan Cygnus atratus, White-faced Heron Egretta novaehollandiae and Grey Teal Anas gracilis) were chosen for this analysis. Black Swans have large local breeding populations near the study region; White-faced Herons have smaller local breeding populations and Grey Teal breed extensively in ephemeral inland floodplains, such as those in the Murray-Darling Basin. All showed significant relationships with streamflow, regional rainfall and the Southern Oscillation Index (SOI) at appropriate scales and time-lags, with streamflow explaining the most variance. Black Swans showed a strong seasonal cycle in abundance and local climate variables had the greatest influence on the counts. Numbers were positively correlated with streamflow in southern Victoria three to six seasons before each count. Broader-scale climatic patterns were more important for the other two species. Numbers of White-faced Herons were positively correlated with streamflow or rainfall over various parts of Australia seven to nine seasons before each count. Numbers of Grey Teal showed weak seasonal cycles, and were negatively correlated with rainfall in Victoria or the Murray-Darling Basin in the seasons before or during each count, and positively with streamflow in the Murray-Darling Basin 15 18 months before each count.

  9. Dark nights reverse metabolic disruption caused by dim light at night.

    Science.gov (United States)

    Fonken, L K; Weil, Z M; Nelson, R J

    2013-06-01

    The increasing prevalence of obesity and related metabolic disorders coincides with increasing exposure to light at night. Previous studies report that mice exposed to dim light at night (dLAN) develop symptoms of metabolic syndrome. This study investigated whether mice returned to dark nights after dLAN exposure recover metabolic function. Male Swiss-Webster mice were assigned to either: standard light-dark (LD) conditions for 8 weeks (LD/LD), dLAN for 8 weeks (dLAN/dLAN), LD for 4 weeks followed by 4 weeks of dLAN (LD/dLAN), and dLAN for 4 weeks followed by 4 weeks of LD (dLAN/LD). After 4 weeks in their respective lighting conditions both groups initially placed in dLAN increased body mass gain compared to LD mice. Half of the dLAN mice (dLAN/LD) were then transferred to LD and vice versa (LD/dLAN). Following the transfer dLAN/dLAN and LD/dLAN mice gained more weight than LD/LD and dLAN/LD mice. At the conclusion of the study dLAN/LD mice did not differ from LD/LD mice with respect to weight gain and had lower fat pad mass compared to dLAN/dLAN mice. Compared to all other groups dLAN/dLAN mice decreased glucose tolerance as indicated by an intraperitoneal glucose tolerance test at week 7, indicating that dLAN/LD mice recovered glucose metabolism. dLAN/dLAN mice also increased MAC1 mRNA expression in peripheral fat as compared to both LD/LD and dLAN/LD mice, suggesting peripheral inflammation is induced by dLAN, but not sustained after return to LD. These results suggest that re-exposure to dark nights ameliorates metabolic disruption caused by dLAN exposure. Copyright © 2013 The Obesity Society.

  10. A semi-empirical model for predicting crown diameter of cedrela ...

    African Journals Online (AJOL)

    A semi-empirical model relating age and breast height has been developed to predict individual tree crown diameter for Cedrela odorata (L) plantation in the moist evergreen forest zones of Ghana. The model was based on field records of 269 trees, and could determine the crown cover dynamics, forecast time of canopy ...

  11. Incorporating crown dimensions into stem height and basal area for ...

    African Journals Online (AJOL)

    These increment models, with and without crown dimension were fitted to a modelling data set and the statistical significance of each of the crown dimensions was examined. All the models were then compared for predictive ability using an independent validation data set. The results obtained were similar for both the total ...

  12. [Effects of repeated firing on microleakage of selective laser melting ceramic crowns].

    Science.gov (United States)

    Zhong, Qun; Peng, Yan; Wu, Xue-Ying; Weng, Jia-Wei

    2016-12-01

    To investigate the effects of repeated firing on microleakage of selective laser melting ceramic crowns. Fifty molars were randomly divided into 2 groups (25 teeth in each group). Teeth in group A received a chamfer finish line preparation, whereas teeth in group B received a shoulder finish line. After SLM metal crowns were fabricated, all the crowns received initial oxidation step, opaque firing, dentin firing and glaze firing, then crowns in each group were randomly divided into 5 sub-groups according to different time of clinical firings. Glass ionomer was applied for bonding. After 5000 thermocycles ranging from 5degrees centigrade to 55degrees centigrade, all the specimens was evaluated by dye penetration and then microleakage was examined under light microscopy. The data were analyzed with SPSS 20.0 software package. Microleakage between all specimens of group A were not statistically significant (P>0.05) whereas that of group B were statistically significant (P<0.05); After the fifth time of clinical firing, microleakage of specimens in group B(B5) were significantly higher than that of group A(A5). Repeated firings had no significant influence on marginal microleakage of SLM ceramic crowns whereas the crowns of chamfer finish lines result in better clinical performance after repeated firings.

  13. The impact of short night-time naps on performance, sleepiness and mood during a simulated night shift.

    Science.gov (United States)

    Centofanti, Stephanie A; Hilditch, Cassie J; Dorrian, Jillian; Banks, Siobhan

    2016-01-01

    Short naps on night shift are recommended in some industries. There is a paucity of evidence to verify the sustained recovery benefits of short naps in the last few hours of the night shift. Therefore, the current study aimed to investigate the sustained recovery benefits of 30 and 10-min nap opportunities during a simulated night shift. Thirty-one healthy participants (18F, 21-35 y) completed a 3-day, between-groups laboratory study with one baseline night (22:00-07:00 h time in bed), followed by one night awake (time awake from 07:00 h on day two through 10:00 h day three) with random allocation to: a 10-min nap opportunity ending at 04:00 h, a 30-min nap opportunity ending at 04:00 h or no nap (control). A neurobehavioral test bout was administered approximately every 2 h during wake periods. There were no significant differences between nap conditions for post-nap psychomotor vigilance performance after controlling for pre-nap scores (p > 0.05). The 30-min nap significantly improved subjective sleepiness compared to the 10-min nap and no-nap control (p effect.

  14. Physiological and foliar symptom response in the crowns of Prunus serotina, Fraxinus americana and Acer rubrum canopy trees to ambient ozone under forest conditions

    International Nuclear Information System (INIS)

    Schaub, M.; Skelly, J.M.; Zhang, J.W.; Ferdinand, J.A.; Savage, J.E.; Stevenson, R.E.; Davis, D.D.; Steiner, K.C.

    2005-01-01

    The crowns of five canopy dominant black cherry (Prunus serotina Ehrh.), five white ash (Fraxinus americana L.), and six red maple (Acer rubrum L.) trees on naturally differing environmental conditions were accessed with scaffold towers within a mixed hardwood forest stand in central Pennsylvania. Ambient ozone concentrations, meteorological parameters, leaf gas exchange and leaf water potential were measured at the sites during the growing seasons of 1998 and 1999. Visible ozone-induced foliar injury was assessed on leaves within the upper and lower crown branches of each tree. Ambient ozone exposures were sufficient to induce typical symptoms on cherry (0-5% total affected leaf area, LAA), whereas foliar injury was not observed on ash or maple. There was a positive correlation between increasing cumulative ozone uptake (U) and increasing percent of LAA for cherry grown under drier site conditions. The lower crown leaves of cherry showed more severe foliar injury than the upper crown leaves. No significant differences in predawn leaf water potential (ψ L ) were detected for all three species indicating no differing soil moisture conditions across the sites. Significant variation in stomatal conductance for water vapor (g wv ) was found among species, soil moisture, time of day and sample date. When comparing cumulative ozone uptake and decreased photosynthetic activity (P n ), red maple was the only species to show higher gas exchange under mesic vs. drier soil conditions (P wv and P n demonstrate the strong influence of heterogeneous environmental conditions within forest canopies. - Within the heterogeneous environment of a mature forest, many factors in addition to soil moisture play a significant role in determining exposure/response relationships to ozone

  15. Earth Pressure on Tunnel Crown

    DEFF Research Database (Denmark)

    Andersen, Lars

    Two different analyses have been carried out in order to find the vertical earth pressure, or overburden pressure, at the crown of a tunnel going through a dike. Firstly, a hand calculation is performed using a simple dispersion of the stresses over depth. Secondly, the finite‐element program...

  16. Wave Forces on Crown Walls

    DEFF Research Database (Denmark)

    Pedersen, Jan; Burcharth, H. F.

    1993-01-01

    This paper presents some of the results from a large parametric laboratory study including more than 200 long-duration model tests. The study addresses both the wave forces imposed on the breakwater crown wall as well as the performance of the structure in reducing the wave overtopping. The testing...

  17. [An in vitro study of the fracture strength of tooth preparations for Empress 2 veneers and crowns and mandibular incisors restored with Empress 2 veneers and crowns].

    Science.gov (United States)

    Wei, Xue; Li, Yan

    2009-12-01

    To compare the fracture resistance of mandibular incisors' preparations for veneers and crowns, mandibular incisors restored with Empress 2 veneers and crowns. 50 human mandibular incisors were randomly divided into five groups. Each group consisted of ten teeth and the treatment obtained as follows: A, tooth preparations for veneers; B, tooth preparations for crowns; C, teeth restored with veneers; D, teeth restored with crowns; E, untreated group. The teeth received standardized preparation and the restorations were manufactured with Empress 2 system and cemented with resin luting agent. The fracture resistances of teeth were measured by Instron universal testing machine and statistically analyzed with one-way ANOVA. The fracture resistances of A, B, C, D, E were (576.11 +/- 91.53), (204.13 +/- 85.88), (451.50 +/- 116.81), (386.16 +/- 117.75) and (566.05 +/- 121.37) N, respectively. The statistical analysis demonstrated significant differences between five groups. There were no significant differences between group A and E, group C and D. Tooth preparations for veneers did not significantly reduce the fracture resistance of mandibular incisor. The fracture resistance of teeth restored with Empress 2 veneers and crowns did not significantly differ from each other.

  18. CROWN-LEVEL TREE SPECIES CLASSIFICATION USING INTEGRATED AIRBORNE HYPERSPECTRAL AND LIDAR REMOTE SENSING DATA

    Directory of Open Access Journals (Sweden)

    Z. Wang

    2018-05-01

    Full Text Available Mapping tree species is essential for sustainable planning as well as to improve our understanding of the role of different trees as different ecological service. However, crown-level tree species automatic classification is a challenging task due to the spectral similarity among diversified tree species, fine-scale spatial variation, shadow, and underlying objects within a crown. Advanced remote sensing data such as airborne Light Detection and Ranging (LiDAR and hyperspectral imagery offer a great potential opportunity to derive crown spectral, structure and canopy physiological information at the individual crown scale, which can be useful for mapping tree species. In this paper, an innovative approach was developed for tree species classification at the crown level. The method utilized LiDAR data for individual tree crown delineation and morphological structure extraction, and Compact Airborne Spectrographic Imager (CASI hyperspectral imagery for pure crown-scale spectral extraction. Specifically, four steps were include: 1 A weighted mean filtering method was developed to improve the accuracy of the smoothed Canopy Height Model (CHM derived from LiDAR data; 2 The marker-controlled watershed segmentation algorithm was, therefore, also employed to delineate the tree-level canopy from the CHM image in this study, and then individual tree height and tree crown were calculated according to the delineated crown; 3 Spectral features within 3 × 3 neighborhood regions centered on the treetops detected by the treetop detection algorithm were derived from the spectrally normalized CASI imagery; 4 The shape characteristics related to their crown diameters and heights were established, and different crown-level tree species were classified using the combination of spectral and shape characteristics. Analysis of results suggests that the developed classification strategy in this paper (OA = 85.12 %, Kc = 0.90 performed better than Li

  19. Influence of cement film thickness on the retention of implant-retained crowns.

    Science.gov (United States)

    Mehl, Christian; Harder, Sönke; Steiner, Martin; Vollrath, Oliver; Kern, Matthias

    2013-12-01

    The main goal of this study was to establish a new, high precision procedure to evaluate the influence of cement film thickness on the retention of cemented implant-retained crowns. Ninety-six tapered titanium abutments (6° taper, 4.3 mm diameter, Camlog) were shortened to 4 mm. Computer-aided design was used to design the crowns, and selective laser sintering, using a cobalt-chromium alloy, was used to produce the crowns. This method used a focused high-energy laser beam to fuse a localized region of metal powder to build up the crowns gradually. Before cementing, preset cement film thicknesses of 15, 50, 80, or 110 μm were established. Glass ionomer, polycarboxylate, or resin cements were used for cementation. After 3 days storage in demineralized water, the retention of the crowns was measured in tension using a universal testing machine. The cement film thicknesses could be achieved with a high level of precision. Interactions between the factors cement and cement film thickness could be found (p ≤ 0.001). For all cements, crown retention decreased significantly between a cement film thickness of 15 and 50 μm (p ≤ 0.001). At 15 μm cement film thickness, the resin cement was the most retentive cement, followed by the polycarboxylate and then the glass ionomer cement (p ≤ 0.05). The results suggest that cement film thickness has an influence on the retentive strength of cemented implant-retained crowns. © 2013 by the American College of Prosthodontists.

  20. What is the preferred number of consecutive night shifts?

    DEFF Research Database (Denmark)

    Nabe-Nielsen, Kirsten; Jensen, Marie Aarrebo; Hansen, Åse Marie

    2016-01-01

    % preferred '2 + 2' and 26% preferred '7 + 7'. Participants, who preferred longer spells of night work experienced that night work was less demanding, found it easier to sleep at different times of the day, and were more frequently evening types compared with participants who preferred shorter spells of night...... the longer spells of night work found night work less demanding, found it easier to sleep at different times of the day, and were more frequently evening types....

  1. Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study.

    Science.gov (United States)

    Arora, Sheen Juneja; Arora, Aman; Upadhyaya, Viram; Jain, Shilpi

    2016-01-01

    As, the longevity of provisional restorations is related to, a perfect adaptation and a strong, long-term union between restoration and teeth structures, therefore, evaluation of marginal leakage of provisional restorative materials luted with cements using the standardized procedures is essential. To compare the marginal leakage of the provisional crowns fabricated from Autopolymerizing acrylic resin crowns and bisphenol A-glycidyl dimethacrylate (BIS-GMA) resin crowns. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin crowns and BIS-GMA resin crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin (SC-10) crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from BIS-GMA resin crowns (Protemp 4) cemented with different temporary luting cements. Freshly extracted 60 maxillary premolars of approximately similar dimensions were mounted in dental plaster. Tooth reduction with shoulder margin was planned to use a customized handpiece-holding jig. Provisional crowns were prepared using the wax pattern fabricated from computer aided designing/computer aided manufacturing milling machine following the tooth preparation. Sixty provisional crowns were made, thirty each of SC-10 and Protemp 4 and were then cemented with three different luting cements. Specimens were thermocycled, submerged in a 2% methylene blue solution, then sectioned and observed under a stereomicroscope for the evaluation of marginal microleakage. A five-level scale was used to score dye penetration in the tooth/cement interface and the results of this study was analyzed using the Chi-square test, Mann-Whitney U-test, Kruskal-Wallis H-test and the results were statistically significant P provisional crowns cemented with three different luting cements along the axial walls of

  2. Night Rover Challenge

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the Night Rover Challenge was to foster innovations in energy storage technology. Specifically, this challenge asked competitors to create an energy...

  3. Zirconia- versus metal-based, implant-supported abutments and crowns

    DEFF Research Database (Denmark)

    Hosseini, Mandana

    , the selection of restoration materials should be based on proper optical characteristics in addition to biocompatibility and sufficient strength of materials. Abutments and crowns based on zirconia are one of the most recent alternatives to metal abutments and metal-ceramic crowns. To date, only few comparative...... and to estimate long-term biomechanical results of zirconia-based versus metal-based restorations. The aim of study I was to analyse the mode of fracture and number of cyclic loadings until veneering fracture of zirconia-based all-ceramic restorations compared to metal-ceramic restorations. The aim of study II...... was to test the reliability and validity of six aesthetic parameters used at the Copenhagen Dental School to assess the aesthetic outcome of implant-supported restorations. The aims of study III and IV were to compare the influence of different abutment and crown materials on biological, biomechanical...

  4. Influence of structure of crown ethers on their radiation stability

    International Nuclear Information System (INIS)

    Grigor'ev, E.I.; Myasoedova, T.G.; Nesterov, S.V.; Trakhtenberg, L.I.

    1988-01-01

    Primary products of γ-radiolysis of crown ethers with the same size of the macrocyclic ring and different substituents were studied by EPR and mass spectrometry. It was shown that introduction of substituents into the polyether ring increases the radiation stability of crown ethers due to intramolecular transfer of energy from the polyether ring to a substituent

  5. [Computer aided design and manufacture of the porcelain fused to metal crown].

    Science.gov (United States)

    Nie, Xin; Cheng, Xiaosheng; Dai, Ning; Yu, Qing; Hao, Guodong; Sun, Quanping

    2009-04-01

    In order to satisfy the current demand for fast and high-quality prosthodontics, we have carried out a research in the fabrication process of the porcelain fused to metal crown on molar with CAD/CAM technology. Firstly, we get the data of the surface mesh on preparation teeth through a 3D-optical grating measuring system. Then, we reconstruct the 3D-model crown with the computer-aided design software which was developed by ourselves. Finally, with the 3D-model data, we produce a metallic crown on a high-speed CNC carving machine. The result has proved that the metallic crown can match the preparation teeth ideally. The fabrication process is reliable and efficient, and the restoration is precise and steady in quality.

  6. Night sky a falcon field guide

    CERN Document Server

    Nigro, Nicholas

    2012-01-01

    Night Sky: A Falcon Field Guide covers both summer and winter constellations, planets, and stars found in the northern hemisphere. Conveniently sized to fit in a pocket and featuring detailed photographs, this informative guide makes it easy to identify objects in the night sky even from one's own backyard. From information on optimal weather conditions, preferred viewing locations, and how to use key tools of the trade, this handbook will help you adeptly navigate to and fro the vast and dynamic nighttime skies, and you'll fast recognize that the night sky's the limit.

  7. Relationship between thyroid stimulating hormone and night shift work.

    Science.gov (United States)

    Moon, So-Hyun; Lee, Bum-Joon; Kim, Seong-Jin; Kim, Hwan-Cheol

    2016-01-01

    Night shift work has well-known adverse effects on health. However, few studies have investigated the relationship between thyroid diseases and night shift work. This study aimed to examine night shift workers and their changes in thyroid stimulating hormones (TSH) levels over time. Medical check-up data (2011-2015) were obtained from 967 female workers at a university hospital in Incheon, Korea. Data regarding TSH levels were extracted from the records, and 2015 was used as a reference point to determine night shift work status. The relationships between TSH levels and night shift work in each year were analyzed using the general linear model (GLM). The generalized estimating equation (GEE) was used to evaluate the repeated measurements over the 5-year period. The GEE analysis revealed that from 2011 to 2015, night shift workers had TSH levels that were 0.303 mIU/L higher than the levels of non-night shift workers (95 % CI: 0.087-0.519 mIU/L, p  = 0.006) after adjusting for age and department. When we used TSH levels of 4.5 ≥ mIU/L to identify subclinical hypothyroidism, night shift workers exhibited a 1.399 fold higher risk of subclinical hypothyroidism (95 % CI: 1.050-1.863, p  = 0.022), compared to their non-night shift counterparts. This result of this study suggests that night shift workers may have an increased risk of thyroid diseases, compared to non-night shift workers.

  8. Increasing the thermopower of crown-ether-bridged anthraquinones

    Science.gov (United States)

    Ismael, Ali K.; Grace, Iain; Lambert, Colin J.

    2015-10-01

    We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either (1) crown-ether or (2) diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The thermopowers of both 1 and 2 are negative and at room temperature are optimised by binding with TTF alone, achieving thermpowers of -600 μV K-1 and -285 μV K-1 respectively. At much lower temperatures, which are relevant to cascade coolers, we find that for 1, a combination of TTF and Na+ yields a maximum thermopower of -710 μV K-1 at 70 K, whereas a combination of TTF and Li+ yields a maximum thermopower of -600 μV K-1 at 90 K. For 2, we find that TTF doping yields a maximum thermopower of -800 μV K-1 at 90 K, whereas at 50 K, the largest thermopower (of -600 μV K-1) is obtain by a combination TTF and K+ doping. At room temperature, we obtain power factors of 73 μW m-1 K-2 for 1 (in combination with TTF and Na+) and 90 μW m-1 K-2 for 2 (with TTF). These are higher or comparable with reported power factors of other organic materials.We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either (1) crown-ether or (2) diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The

  9. Direct composite restoration of permanent anterior teeth uncomplicated crown fractures

    Directory of Open Access Journals (Sweden)

    Ashley Evans Nicholas

    2018-01-01

    Full Text Available An uncomplicated crown fracture is a fracture that involves only the tooth enamel or the dentin and tooth enamel without any damage or exposure to the pulp. Crown fracture of the anterior teeth usually caused by traumatic forces such as falls, accidents, violence, or sports activities. Traumatic injuries of the oral region frequently involve the anterior teeth, especially maxillary incisors due to the anatomic factors which may affect the functional and aesthetical values of the teeth. The objective of this literature study was to know more about uncomplicated crown fracture of the anterior teeth and its restoration. This research was a literature study performed by researching, highlighting various interesting facts and compiling the relevant published journals. The most common and ideal direct restoration of the anterior teeth was the composite resin restoration. The anterior teeth restoration was considered to be a complex and challenging case to solves due to the fact that besides reconstructing the tooth and regaining the function, the aesthetical aspect was also becoming the main objectives. The permanent anterior teeth uncomplicated crown fracture was the most common case of tooth fractures which was mainly caused by traumatic injuries such as falls, accidents, excessive forces, violence, and also sports activities. Dental injuries of the anterior teeth also affected the aesthetical properties and the function of the tooth. Composite resin restoration was able to performed directly on the permanent anterior teeth uncomplicated crown fracture.

  10. A novel approach to internal crown characterization for coniferous tree species classification

    Science.gov (United States)

    Harikumar, A.; Bovolo, F.; Bruzzone, L.

    2016-10-01

    The knowledge about individual trees in forest is highly beneficial in forest management. High density small foot- print multi-return airborne Light Detection and Ranging (LiDAR) data can provide a very accurate information about the structural properties of individual trees in forests. Every tree species has a unique set of crown structural characteristics that can be used for tree species classification. In this paper, we use both the internal and external crown structural information of a conifer tree crown, derived from a high density small foot-print multi-return LiDAR data acquisition for species classification. Considering the fact that branches are the major building blocks of a conifer tree crown, we obtain the internal crown structural information using a branch level analysis. The structure of each conifer branch is represented using clusters in the LiDAR point cloud. We propose the joint use of the k-means clustering and geometric shape fitting, on the LiDAR data projected onto a novel 3-dimensional space, to identify branch clusters. After mapping the identified clusters back to the original space, six internal geometric features are estimated using a branch-level analysis. The external crown characteristics are modeled by using six least correlated features based on cone fitting and convex hull. Species classification is performed using a sparse Support Vector Machines (sparse SVM) classifier.

  11. Night time cooling by ventilation or night sky radiation combined with in-room radiant cooling panels including phase change materials

    DEFF Research Database (Denmark)

    Bourdakis, Eleftherios; Olesen, Bjarne W.; Grossule, Fabio

    Night sky radiative cooling technology using PhotoVoltaic/Thermal panels (PVT) and night time ventilation have been studied both by means of simulations and experiments to evaluate their potential and to validate the created simulation model used to describe it. An experimental setup has been...... depending on the sky clearness. This cooling power was enough to remove the stored heat and regenerate the ceiling panels. The validation simulation model results related to PCM were close to the corresponding results extracted from the experiment, while the results related to the production of cold water...... through the night sky radiative cooling differed significantly. The possibility of night time ventilation was studied through simulations for three different latitudes. It was concluded that for Danish climatic conditions night time ventilation would also be able to regenerate the panels while its...

  12. Biomass in monospecific and mixed stands of eucalyptus and black wattle and corn in an agroforestry system

    Directory of Open Access Journals (Sweden)

    Márcio Viera

    2011-06-01

    Full Text Available This study aimed at quantifying the production and distribution of aboveground biomass from the plants in monospecific and mixed stands of eucalyptus (hybrid E. urophylla x E. grandis and black wattle (Acacia mearnsii and, of corn (Zea mays in agrosilvicultural systems. The biomass evaluation (leaf, branch, bark and wood from the forest species at 6 and 18 months of age were performed at the treatments: 100E (100% of eucalyptus + corn; - 100A (100% of black wattle + corn; - 50E:50A (50% of eucalyptus + 50% of black wattle + corn. The corn biomass evaluation (stem, leaves, straw, cob and grains was performed at treatments 100E; 100A; 50E:50A; 75E:25A (75% of eucalyptus + 25% of black wattle + corn; and - 25E:75A (25% of eucalyptus + 75% of black wattle + corn. The biomass production from eucalyptus and from the black wattle, in both monospecific and mixed planting, did not differ in any of the assessed ages but, when evaluated by plants compartments, it was verified an interspecific competitive interaction from the eucalyptus on the black wattle, reducing the formation of crown biomass. The total production of corn biomass in agrosilvicutural systems with eucalyptus and with black wattle in monospecific or mixed plantings did not differ in the studied treatments.

  13. Impact of a drop onto a wetted wall: description of crown formation and propagation

    Science.gov (United States)

    Roisman, I. V.; Tropea, C.

    2002-12-01

    The impact of a drop onto a liquid film with a relatively high impact velocity, leading to the formation of a crown-like ejection, is studied theoretically. The motion of a kinematic discontinuity in the liquid film on the wall due to the drop impact, the formation of the upward jet at this kinematic discontinuity and its elevation are analysed. Four main regions of the drop and film are considered: the perturbed liquid film on the wall inside the crown, the unperturbed liquid film on the wall outside the crown, the upward jet forming a crown, and the free rim bounding this jet. The theory of Yarin & Weiss (1995) for the propagation of the kinematic discontinuity is generalized here for the case of arbitrary velocity vectors in the inner and outer liquid films on the wall. Next, the mass, momentum balance and Bernoulli equations at the base of the crown are considered in order to obtain the velocity and the thickness of the jet on the wall. Furthermore, the dynamic equations of motion of the crown are developed in the Lagrangian form. An analytical solution for the crown shape is obtained in the asymptotic case of such high impact velocities that the surface tension and the viscosity effects can be neglected in comparison to inertial effects. The edge of the crown is described by the motion of a rim, formed due to the surface tension.

  14. Experiments on the breakup of drop-impact crowns by Marangoni holes

    KAUST Repository

    Aljedaani, Abdulrahman Barakat

    2018-04-04

    We investigate experimentally the breakup of the Edgerton crown due to Marangoni instability when a highly viscous drop impacts on a thin film of lower-viscosity liquid, which also has different surface tension than the drop liquid. The presence of this low-viscosity film modifies the boundary condition, giving effective slip to the drop along the solid substrate. This allows the high-viscosity drop to form a regular bowl-shaped crown, which rises vertically away from the solid and subsequently breaks up through the formation of a multitude of Marangoni holes. Previous experiments have proposed that the breakup of the crown results from a spray of fine droplets ejected from the thin low-viscosity film on the solid, e.g. Thoroddsen et al. (J. Fluid Mech., vol. 557, 2006, pp. 63–72). These droplets can hit the inner side of the crown forming spots with lower surface tension, which drives a thinning patch leading to the hole formation. We test the validity of this assumption with close-up imaging to identify individual spray droplets, to show how they hit the crown and their lower surface tension drive the hole formation. The experiments indicate that every Marangoni-driven patch/hole is promoted by the impact of such a microdroplet. Surprisingly, in experiments with pools of higher surface tension, we also see hole formation. Here the Marangoni stress changes direction and the hole formation looks qualitatively different, with holes and ruptures forming in a repeatable fashion at the centre of each spray droplet impact. Impacts onto films of the same liquid, or onto an immiscible liquid, do not in general form holes. We furthermore characterize the effects of drop viscosity and substrate-film thickness on the overall evolution of the crown. We also measure the three characteristic velocities associated with the hole formation: i.e. the Marangoni-driven growth of the thinning patches, the rupture speed of the resulting thin films inside these patches and finally the

  15. [Shift and night work and mental health].

    Science.gov (United States)

    Sancini, Angela; Ciarrocca, Manuela; Capozzella, Assunta; Corbosiero, Paola; Fiaschetti, Maria; Caciari, Tiziana; Cetica, Carlotta; Scimitto, Lara; Ponticiello, Barnaba Giuseppina; Tasciotti, Zaira; Schifano, Maria Pia; Andreozzit, Giorgia; Tomei, Francesco; Tomei, Gianfranco

    2012-01-01

    Aim of our study was to evaluate the influence that shift work and night work could have on mental health. A review of literary articles from 1990 to 2011 on shift work and night work was carried out. The results of this review confirmed that the shift work and night work affect mental health with the onset of neuropsychological disorders such as mood disorders, anxiety, nervousness, depressive anxiety syndromes, chronic fatigue and chronic insomnia irritability, sleep disturbances, reduction in levels of attention, cognitive impairments, alteration of circadian rhythm. Night work and shift work cause severe desynchronization of the cronobiological rhythms and a disruption of social life with negative effects on performance at work, on health and on social relationships. In the light of these results and recognizing shift work and night work as risk factors for the health of workers is necessary to implement preventive and periodic health checks by the occupational doctor to ensure the health and safety of workers taking account of the different environmental and individual factors.

  16. Kinetically inert lanthanide complexes as reporter groups for binding of potassium by 18-crown-6

    DEFF Research Database (Denmark)

    Junker, Anne Kathrine Ravnsborg; Tropiano, Manuel; Faulkner, Stephen

    2016-01-01

    in a copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) “click” reaction with azide-functionalized crown ethers. The resulting complexes were investigated using NMR and optical methods. Titrations with potassium chloride in methanol observing the sensititzed europium- and terbium-centered emissions were......-centered emission to report on the binding of potassium in an 18-crown-6 binding pocket. The responsive systems were made by linking a crown ether to a kinetically inert lanthanide binding pocket using a molecular building block approach. Specifically, an alkyne-appended Ln.DO3A was used as a building block...... used to investigate the response of the systems. The molecular reporters based on aliphatic crown ethers were found to have strongly inhibited binding of potassium, while the benzo-18-crown-6 derived systems had essentially the same association constants as the native crown ethers. The shape...

  17. Effect of Crystallization Firing on Marginal Gap of CAD/CAM Fabricated Lithium Disilicate Crowns.

    Science.gov (United States)

    Gold, Steven A; Ferracane, Jack L; da Costa, Juliana

    2018-01-01

    To evaluate the marginal gaps of CAD/CAM (CEREC 3) produced crowns made from leucite-reinforced glass-ceramic (IPS Empress CAD) blocks (LG), and lithium-disilicate (IPS e.max CAD) blocks before (LD-B), and after (LD-A) crystallization firing. A human molar tooth (#19) was mounted with adjacent teeth on a typodont and prepared for a full-coverage ceramic crown. The typodont was assembled in the mannequin head to simulate clinical conditions. After tooth preparation 15 individual optical impressions were taken by the same operator using titanium dioxide powder and a CEREC 3 camera per manufacturer's instructions. One operator designed and machined the crowns in leucite-reinforced glass-ceramic blocks (n = 5) and lithium-disilicate blocks (n = 10) using the CEREC 3 system. The crowns were rigidly seated on the prepared tooth, and marginal gaps (μm) were measured with an optical microscope (500×) at 12 points, 3 on each of the M, B, D, and L surfaces of the leucite-reinforced glass-ceramic crowns and the lithium-disilicate crowns before and after crystallization firing. Results were analyzed by two-way ANOVA followed by a Tukey's post hoc multiple comparison test (α = 0.05). The overall mean marginal gaps (μm) for the crowns evaluated were: LG = 49.2 ± 5.5, LD-B = 42.9 ± 12.2, and LD-A = 57.2 ± 16.0. The marginal gaps for LG and LD-B were not significantly different, but both were significantly less than for LD-A. The type of ceramic material did not affect the marginal gap of CAD/CAM crowns. The crystallization firing process required for lithium-disilicate crowns resulted in a significant increase in marginal gap size, likely due to shrinkage of the ceramic during the crystallization process. The marginal gap of CAD/CAM-fabricated lithium disilicate crowns increases following crystallization firing. The marginal gap still remains within clinically acceptable parameters. © 2017 by the American College of Prosthodontists.

  18. Evaluation of the Effect of Surgical Crown Lengthening on Periodontal Parameters

    Directory of Open Access Journals (Sweden)

    Farzane Vaziri

    2015-09-01

    Full Text Available Background: Surgical crown lengthening is needed for teeth with subgingival caries, fractured teeth, insufficient crown length, and deep subgingival margin of failed restorations. Since there is no agreement on the effects of crown lengthening surgery on gingival parameters, the purpose of this study was to evaluate periodontal parameters in patients who needed crown lengthening surgery. Methods: Twenty patients who had healthy periodontium and needed surgical crown lengthening were included in this study. After professional dental cleaning, gingival parameters including gingival index (GI, probing depth (PD, bone level (BL, and transsulcular probing (TSP were recorded in interproximal and keratinized gingiva (KG in mid buccal portion. The patients were evaluated one and three months after the surgery. Results: After one and three months of the surgery, the amount of PD reduced from 2.32 mm to 1.25 mm and 1.17 mm, respectively (P=0.001. The mean of BL reduction was 0.88 mm after one month (P=0.001, but there was no reduction between 1 month and 3 months. Amounts of KG at baseline andone month later were 4.2 mm and 2.9 mm, respectively (P=0.001, and remained at the same level up to three months. TSP significantly reduced (from 3.67 mm at baseline to 2.62 mm after 1 month, and to 2.27 mm after 3 months (P=0.001, P=0.005. Conclusion: The present  study suggests that in the presence of good oral hygiene, except BW (biological width, other parameters including PD, BL, KG, and TSP had significant changes after crown lengthening surgery in the period of 1 month and 3 months (P

  19. NIGHT SKY BRIGHTNESS ABOVE ZAGREB 2012.-2017.

    Directory of Open Access Journals (Sweden)

    Željko Andreić

    2018-01-01

    Full Text Available The night sky brightness at the RGN site (near the centre of Zagreb, Croatia was monitored form January 2012. to December 2017. The gathered data show that the average night sky brightness in this period did not change significantly, apart from differences caused by yearly variations in meteorological parameters. The nightly minima, maxima and mean values of the sky brightness do change considerably due to changes in meteorological conditions, often being between 2 and 3 magnitudes. The seasonal probability curves and histograms are constructed and are used to obtain additional information on the light pollution at the RGN site. They reveal that the night sky brightness clutters around two peaks, at about 15.0 mag/arcsec2 and at about 18.2 mag/arcsec2. The tendency to slightly lower brightness values in spring and summer can also be seen in the data. Two peaks correspond to cloudy and clear nights respectively, the difference in brightness between them being about 3 magnitudes. A crude clear/cloudy criterion can be defined too: the minimum between two peaks is around 16.7 mag/arcsec2. The brightness values smaller than thisare attributed to clear nights and vice-versa. Comparison with Vienna and Hong-Kong indicates that the light pollution of Zagreb is a few times larger.

  20. Night shift decreases cognitive performance of ICU physicians.

    Science.gov (United States)

    Maltese, François; Adda, Mélanie; Bablon, Amandine; Hraeich, Sami; Guervilly, Christophe; Lehingue, Samuel; Wiramus, Sandrine; Leone, Marc; Martin, Claude; Vialet, Renaud; Thirion, Xavier; Roch, Antoine; Forel, Jean-Marie; Papazian, Laurent

    2016-03-01

    The relationship between tiredness and the risk of medical errors is now commonly accepted. The main objective of this study was to assess the impact of an intensive care unit (ICU) night shift on the cognitive performance of a group of intensivists. The influence of professional experience and the amount of sleep on cognitive performance was also investigated. A total of 51 intensivists from three ICUs (24 seniors and 27 residents) were included. The study participants were evaluated after a night of rest and after a night shift according to a randomized order. Four cognitive skills were tested according to the Wechsler Adult Intelligence Scale and the Wisconsin Card Sorting Test. All cognitive abilities worsened after a night shift: working memory capacity (11.3 ± 0.3 vs. 9.4 ± 0.3; p night shift. The cognitive abilities of intensivists were significantly altered following a night shift in the ICU, regardless of either the amount of professional experience or the duration of sleep during the shift. The consequences for patients' safety and physicians' health should be further evaluated.

  1. Night-Time Light Dynamics during the Iraqi Civil War

    Directory of Open Access Journals (Sweden)

    Xi Li

    2018-06-01

    Full Text Available In this study, we analyzed the night-time light dynamics in Iraq over the period 2012–2017 by using Visible Infrared Imaging Radiometer Suite (VIIRS monthly composites. The data quality of VIIRS images was improved by repairing the missing data, and the Night-time Light Ratio Indices (NLRIs, derived from urban extent map and night-time light images, were calculated for different provinces and cities. We found that when the Islamic State of Iraq and Syria (ISIS attacked or occupied a region, the region lost its light rapidly, with the provinces of Al-Anbar, At-Ta’min, Ninawa, and Sala Ad-din losing 63%, 73%, 88%, and 56%, of their night-time light, respectively, between December 2013 and December 2014. Moreover, the light returned after the Iraqi Security Forces (ISF recaptured the region. In addition, we also found that the night-time light in the Kurdish Autonomous Region showed a steady decline after 2014, with the Arbil, Dihok, and As-Sulaymaniyah provinces losing 47%, 18%, and 31% of their night-time light between December 2013 and December 2016 as a result of the economic crisis in the region. The night-time light in Southern Iraq, the region controlled by Iraqi central government, has grown continuously; for example, the night-time light in Al Basrah increased by 75% between December 2013 and December 2017. Regions formerly controlled by ISIS experienced a return of night-time light during 2017 as the ISF retook almost all this territory in 2017. This indicates that as reconstruction began, electricity was re-supplied in these regions. Our analysis shows the night-time light in Iraq is directly linked to the socioeconomic dynamics of Iraq, and demonstrates that the VIIRS monthly night-time light images are an effective data source for tracking humanitarian disasters in that country.

  2. Distribution and prevalence of crown rot pathogens affecting wheat crops in southern Chile

    Directory of Open Access Journals (Sweden)

    Ernesto Moya-Elizondo

    2015-03-01

    Full Text Available Crown rot pathogens are associated with higher losses for wheat crop farmers, but information about the distribution and prevalence of these pathogens in Chile is inadequate. Distribution and prevalence of wheat (Triticum aestivum L. crown rot pathogens were examined in a survey of 48 commercial fields from December 2011 to February 2012 in southern Chile. These fields were located between Collipulli (37°56'00" S; 72°26'39" W and Purranque (40°50'30" S; 73°22'03" W. Severity of crown rot disease was determined through visual assessment of the first internode of 20 tillers obtained from each field. Incidence of crown rot pathogens per field was determined by plating the 20 tillers on Petri plates with 20% potato dextrose agar amended with lactic acid (aPDA medium. Resulting fungal colonies from monoxenic culture were identified by morphological or molecular-assisted identification. Severity of crown rot varied between 11.3% and 80% for individual fields. Culture plate analysis showed 72.2% of stems were infected with some fungus. Fusarium avenaceum, F. graminearum, and F. culmorum, pathogens associated with Fusarium crown rot disease were isolated from 13.5% of tillers. Gaeumannomyces graminis, causal agent of take-all disease in cereals, was isolated from 11.1% of culms. Phaeosphaeria sp., an endophyte and possibly a non-pathogenic fungus, was isolated from 13.9% of tillers. Pathogenic fungi such as Rhizoctonia spp. and Microdochium nivale, other saprophyte, and several unidentified non-sporulating fungi were isolated at frequencies lower than 3% of the total. Fusarium crown rot and take-all were the most prevalent and distributed crown rot diseases present in wheat crops in southern Chile.

  3. Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

    Science.gov (United States)

    Kim, Tae-Gyung; Kim, Sungtae; Lee, Jae-Hoon

    2016-01-01

    The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n = 40). For ICC (Intraoral, CAD/CAM) group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver) machinable alloy were generated. For IC (Intraoral, Cast) group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM) group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast) group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α = 0.05). The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P 0.05). Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions. PMID:28018914

  4. Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

    Directory of Open Access Journals (Sweden)

    Tae-Gyung Kim

    2016-01-01

    Full Text Available The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n=40. For ICC (Intraoral, CAD/CAM group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver machinable alloy were generated. For IC (Intraoral, Cast group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α=0.05. The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P0.05. Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions.

  5. The city at night (the case of Maribor, Slovenia

    Directory of Open Access Journals (Sweden)

    Vladimir Drozg

    2016-12-01

    Full Text Available This paper focuses on the city at night. The distinctive aspect of the discussed topic is the time dimension of spaces and areas – places that “live” at night. The night has economic, cultural, social and formal elements; and it is these elements that underpin how we see and come to know the city at night. A range of topics have been explored: places of retailing and consumption, workplaces, places of entertainment, places that embody the night image of the city and places of socially unacceptable, delinquent behaviour. In the empirical part, we examined the city of Maribor, Slovenia.

  6. Night vision: changing the way we drive

    Science.gov (United States)

    Klapper, Stuart H.; Kyle, Robert J. S.; Nicklin, Robert L.; Kormos, Alexander L.

    2001-03-01

    A revolutionary new Night Vision System has been designed to help drivers see well beyond their headlights. From luxury automobiles to heavy trucks, Night Vision is helping drivers see better, see further, and react sooner. This paper describes how Night Vision Systems are being used in transportation and their viability for the future. It describes recent improvements to the system currently in the second year of production. It also addresses consumer education and awareness, cost reduction, product reliability, market expansion and future improvements.

  7. Crystal structure of cis-anti-cis-dicyclohexane-18-crown-6 acetonitrile disolvate

    Directory of Open Access Journals (Sweden)

    Alexander Nazarenko

    2015-07-01

    Full Text Available The title compound (systematic name: cis-anti-cis-2,5,8,15,18,21-hexaoxatricyclo[20.4.0.09,14]hexacosane acetonitrile disolvate, C20H36O6·2CH3CN, crystallizes from an acetonitrile solution of dicyclohexane-18-crown-6 on evaporation. The molecule is arranged around a center of symmetry with half the crown ether molecule and one molecule of acetonitrile symmetry independent. All O—C—C—O torsion angles are gauche while all C—O—C—C angles are trans. The sequence of torsion angles is [(tg+t(tg−t]3; the geometry of oxygen atoms is close to pseudo-D3d with three atoms below and three atoms above the mean plane, with an average deviation of ±0.16 (1 Å from the mean plane. This geometry is identical to that observed in metal ion complexes of dicyclohexane-18-crown-6 but differs significantly from the conformation of a free unsolvated molecule. Each acetonitrile molecule connects to a crown ether molecule via two of its methyl group H atoms (C—H...O. Weaker interactions exist between the third H atom of the acetonitrile methyl group and an O atom of a neighbouring crown ether molecule (C—H...O; and between the N atom of the acetonitrile molecule and a H atom of another neighbouring crown ether molecule. All these intermolecular interactions create a three-dimensional network stabilizing the disolvate.

  8. Night lights and regional income inequality in Africa

    DEFF Research Database (Denmark)

    Mveyange, Anthony Francis

    Estimating regional income inequality in Africa has been challenging due to the lack of reliable and consistent sub-national income data. I employ night lights data to circumvent this limitation. I find significant and positive associations between regional inequality visible through night lights...... and income in Africa. Thus, in the absence of income data, we can construct regional inequality proxies using night lights data. Further investigation on the night lights-based regional inequality trends reveals two main findings: first, increasing regional inequality trends between 1992 and 2003; and second......, declining regional inequality trends between 2004 and 2012....

  9. [Effects of habitat fragmentation on nesting site selection of red-crowned crane].

    Science.gov (United States)

    Wan, Dongmei; Gao, Wei; Wang, Qiuyu; Wang, Haitao; Liu, Mingyu

    2002-05-01

    During April and May of 1985, 1995 and 1998, red-crowned crane's nesting and variation of breeding population quantities in Shuangtaihekou National Natural Reserve in Liaoning, and also the habitat fragmentation there were investigated. Associated with previous data of the reserve, red-crowned crane's nesting habitat had been seriously fragmentated into 91 patches from one integrated reed wetland. The area of the smallest patch was 0.37 km2, and the minimum distance of two nests was 304 m. Compared with records of previous data, the minimum area of nesting habitat reduced by 0.72 km2. However, the breeding population quantities of red-crowned crane had maintained at about 30 pairs for a long period. The red-crowned crane adapted to the changed environment by the ecological adaptation strategy of reducing area of nesting habitat.

  10. Dry eye signs and symptoms in night-time workers

    OpenAIRE

    Ali Makateb; Hamed Torabifard

    2017-01-01

    Purpose: To determine the effect of night-time working on dry eye signs and symptoms. Methods: A total of 50 healthy subjects completed a dry eye questionnaire and underwent clinical examinations including basic Schirmer's test and tear breakup time (TBUT) test on two consecutive days, before and after the night shift (12-hrs night-shift). Results: All dry eye symptoms were aggravated significantly after the night shift (P 

  11. Solar Neutrino Day-Night Effect

    International Nuclear Information System (INIS)

    Blennow, Mattias; Ohlsson, Tommy; Snellman, Hakan

    2005-01-01

    We summarize the results of Ref. [M. Blennow, T. Ohlsson and H. Snellman, Phys. Rev. D 69 (2004) 073006, hep-ph/0311098] in which we determine the effects of three flavor mixing on the day-night asymmetry in the flux of solar neutrinos. Analytic methods are used to determine the difference in the day and night solar electron neutrino survival probabilities and numerical methods are used to determine the effect of three flavor mixing at detectors

  12. Influence of different post core materials on the color of Empress 2 full ceramic crowns.

    Science.gov (United States)

    Ge, Jing; Wang, Xin-zhi; Feng, Hai-lan

    2006-10-20

    For esthetic consideration, dentin color post core materials were normally used for all-ceramic crown restorations. However, in some cases, clinicians have to consider combining a full ceramic crown with a metal post core. Therefore, this experiment was conducted to test the esthetical possibility of applying cast metal post core in a full ceramic crown restoration. The color of full ceramic crowns on gold and Nickel-Chrome post cores was compared with the color of the same crowns on tooth colored post cores. Different try-in pastes were used to imitate the influence of a composite cementation on the color of different restorative combinations. The majority of patients could not detect any color difference less than DeltaE 1.8 between the two ceramic samples. So, DeltaE 1.8 was taken as the objective evaluative criterion for the evaluation of color matching and patients' satisfaction. When the Empress 2 crown was combined with the gold alloy post core, the color of the resulting material was similar to that of a glass fiber reinforced resin post core (DeltaE = 0.3). The gold alloy post core and the try-in paste did not show a perceptible color change in the full ceramic crowns, which indicated that the color of the crowns might not be susceptible to change between lab and clinic as well as during the process of composite cementation. Without an opaque covering the Ni-Cr post core would cause an unacceptable color effect on the crown (DeltaE = 2.0), but with opaque covering, the color effect became more clinically satisfactory (DeltaE = 1.8). It may be possible to apply a gold alloy post core in the Empress 2 full ceramic crown restoration when necessary. If a non-extractible Ni-Cr post core exists in the root canal, it might be possible to restore the tooth with an Empress 2 crown after covering the labial surface of the core with one layer of opaque resin cement.

  13. Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study

    Directory of Open Access Journals (Sweden)

    Sheen Juneja Arora

    2016-01-01

    Conclusion: The temporary cements with eugenol showed more microleakage than those without eugenol. SC-10 crowns showed more microleakage compared to Protemp 4 crowns. SC-10 crowns cemented with Kalzinol showed maximum microleakage and Protemp 4 crowns cemented with HY bond showed least microleakage.

  14. Crown-Stump Diameter Model for Parkia biglobosa Benth. Species in Makurdi, Benue State, Nigeria

    Directory of Open Access Journals (Sweden)

    O. Chukwu

    2017-07-01

    Full Text Available The crown of tree is the centre of physiological activity which gives an indication of the potential photosynthetic capacity on a tree. Though, its measurement remains a challenge in forest inventory task. The ability to predict crown diameter from stump diameter provides an effective technique of obtaining its estimate. This helps in detecting the excessive tree felling than actual requirements and wildlife suitability.The main objective of this study was to develop and test crown diameter prediction models for silvicultural management of naturally grown Parkia biglobosa within the University of Agriculture, Makurdi. Nine 100 m x 100 m temporary sample plots were established using simple random sampling method. Crown diameter and stump diameter were measured in all living P. biglobosa trees with stump diameter ≥10.0 cm. Least square method was used to convert the counted stumps into harvested crown dimension. Three linear and three non-linear models using stump diameter as the exploratory variable were developed and evaluated using the adjusted coefficient of determination (Adj.R2, standard error of estimate (SEE, prediction error sum of squares (PRESS and Akaike information criterion (AIC. The crown-stump diameter relationship was best described by the double logarithmic function with .The result showed that Crown diameter estimation was feasible even when the only information available is stump diameter.The resulting equation was tested for validation with independent data obtained from additional plots and was found to be desirable for estimating the crown diameter for Parkia biglobosa in Makurdi, Benue State, Nigeria.

  15. Science by night – it's magic!

    CERN Document Server

    CERN Bulletin

    2010-01-01

    The control rooms of the LHC and its experiments threw open their doors to 150 youngsters on European Researchers Night and the place was buzzing with excitement all evening!    It's just possible that a few scientists' vocations were born last Friday night, as the sixth European Researchers Night took place across Europe. CERN was taking part for the first time and invited young people aged from 12 to 19 into the control rooms of the LHC machine and five experiments. From 5.00 in the afternoon until 1.00 in the morning, 150 youngsters and physics teachers got the opportunity to sit with scientists at the controls of the accelerator and experiments. This meeting of minds went down very well for all concerned, the scientists being only too happy to wax lyrical about their passion. The youngsters were thrilled with their visit and amazed at being allowed so close to the controls of these mighty machines. The night-time setting added an extra touch of magic to the whole event. Some just could...

  16. Crown ether complexes of lanthanoid and actinoid elements. Crystal and molecular structure of Nd(NO/sub 3/)/sub 3/(18-crown-6)

    Energy Technology Data Exchange (ETDEWEB)

    Bombieri, G; De Paoli, G; Benetollo, F [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi; Cassol, A [Padua Univ. (Italy)

    1980-01-01

    Nd(NO/sub 3/)/sub 3/.18-Crown-6 crystallizes in the orthorhombic system, space group Pbca with eight molecules in a cell of dimensions a = 15.512(9), b = 21.662(1), c = 12.141(6) A. The structure has been determined by Patterson heavy-atom methods and refined by full-matrix least squares to R = 0.038. The neodymium atom is coordinated by 6 oxygen atoms of the 18-crown-6 unit and by three bidentate nitrate groups; one on the more hindered side of the ring and two on the opposite side.

  17. Night Shift Work and Risk of Breast Cancer.

    Science.gov (United States)

    Hansen, Johnni

    2017-09-01

    Night work is increasingly common and a necessity in certain sectors of the modern 24-h society. The embedded exposure to light-at-night, which suppresses the nocturnal hormone melatonin with oncostatic properties and circadian disruption, i.e., misalignment between internal and external night and between cells and organs, are suggested as main mechanisms involved in carcinogenesis. In 2007, the International Agency for Research on Cancer (IARC) classified shift work that involves circadian disruption as probably carcinogenic to humans based on limited evidence from eight epidemiologic studies on breast cancer, in addition to sufficient evidence from animal experiments. The aim of this review is a critical update of the IARC evaluation, including subsequent and the most recent epidemiologic evidence on breast cancer risk after night work. After 2007, in total nine new case-control studies, one case-cohort study, and eight cohort studies are published, which triples the number of studies. Further, two previous cohorts have been updated with extended follow-up. The assessment of night shift work is different in all of the 26 existing studies. There is some evidence that high number of consecutive night shifts has impact on the extent of circadian disruption, and thereby increased breast cancer risk, but this information is missing in almost all cohort studies. This in combination with short-term follow-up of aging cohorts may explain why some cohort studies may have null findings. The more recent case-control studies have contributed interesting results concerning breast cancer subtypes in relation to both menopausal status and different hormonal subtypes. The large differences in definitions of both exposure and outcome may contribute to the observed heterogeneity of results from studies of night work and breast cancer, which overall points in the direction of an increased breast cancer risk, in particular after over 20 years of night shifts. Overall, there is a

  18. Conductometric study of reaction kinetics between potassium superoxide and 18-crown-6 in dimethylsulfoxide

    International Nuclear Information System (INIS)

    Efimova, I.V.; Opejda, I.A.

    2000-01-01

    Complexing within KO 2 -18-crown-6-solvent, KOH-18-crown-6-solvent and KI-KO 2 -18-crown-6-solvent systems in dimethylsulfoxide was studied by measurement of electrical conductivity. It was shown that time variation of electrical conductivity under the given conditions was described by the Erofeev-Auramy equation, the coefficients of that equation for various systems were determined, time to reach equilibrium state was estimated. Linear dependences of electrical conductivity of KI-KO 2 salt solutions at presence of 18-crown-6 at the state of equilibrium in contrast to the component concentrations were determined [ru

  19. Heron Island, Australia

    Science.gov (United States)

    2002-01-01

    The skies over Northern India are filled with a thick soup of aerosol particles all along the southern edge of the Himalayan Mountains, and streaming southward over Bangladesh and the Bay of Bengal. Notice that the air over the Tibetan Plateau to the north of the Himalayas is very clear, whereas the view of the land surface south of the mountains is obstructed by the brownish haze. Most of this air pollution comes from human activities. The aerosol over this region is notoriously rich in sulfates, nitrates, organic and black carbon, and fly ash. These particles not only represent a health hazard to those people living in the region, but scientists have also recently found that they can have a significant impact on the region's hydrological cycle and climate (click to read the relevant NASA press release). This true-color image was acquired on December 4, 2001, by the Moderate-resolution Imaging Spectroradiometer (MODIS), flying aboard NASA's Terra satellite. It is interesting to compare the image above with this earlier MODIS image over the region, acquired on October 23, 2001. Notice the difference in the clarity of the air over the region in the earlier image. Under the thick plume of aerosol, the Brahmaputra (upper right) and Ganges Rivers are still visible. The many mouths of the Ganges have turned the northern waters of the Bay of Bengal a murky brown as they empty their sediment-laden waters into the bay. Toward the upper lefthand corner of the image, there appears to be a fresh swath of snow on the ground just south of the Himalayas. Image courtesy Jacques Descloitres, MODIS Land Rapid Response Team at NASA GSFC

  20. Mandibular molar crown-topography, a biological predisposing ...

    African Journals Online (AJOL)

    Mandibular molar crown-topography, a biological predisposing factor to development of caries – a post-mortem analysis of 2500 extracted lower permanent molars at the dental centre, University of Benin teaching hospital.

  1. Night-time warming and the greenhouse effect

    International Nuclear Information System (INIS)

    Kukla, G.; Karl, T.R.

    1993-01-01

    Studies of temperature data collected mainly from rural stations in North America, China, the Commonwealth of Independent States, Australia, Sudan, Japan, Denmark, Northern Finland, several Pacific Islands, Pakistan, South Africa and Europe suggest that the reported warming of the Northern Hemisphere since WWII is principally a result of an increase in night-time temperatures. The average monthly maximum and minimum temperatures, as well as the mean diurnal temperature range (DTR), were calculated for various regions from data supplied by 1000 stations from 1951 to 1990. Average and minimum temperatures generally rose during the analysed interval and the rise in night-time temperatures was more pronounced than the increase in daily maximum temperatures. As a result, the mean DTR decreased almost everywhere. The most probable causes of the rise in night-time temperatures are: an increase in cloudiness owing to natural changes in the circulation patterns of oceans and the atmosphere; increased cloud cover density caused by industrial pollution; urban heat islands, generated by cities, which are strongest during the night; irrigation which keeps the surface warmer at night and cooler by day; and anthropogenic greenhouse gases. 18 refs., 3 figs

  2. A Reliability Generalization Study of the Marlowe-Crowne Social Desirability Scale.

    Science.gov (United States)

    Beretvas, S, Natasha; Meyers, Jason L.; Leite, Walter L.

    2002-01-01

    Conducted a reliability generalization study of the Marlowe-Crowne Social Desirability Scale (D. Crowne and D. Marlowe, 1960). Analysis of 93 studies show that the predicted score reliability for male adolescents was 0.53, and reliability for men's responses was lower than for women's. Discusses the need for further analysis of the scale. (SLD)

  3. Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study

    Science.gov (United States)

    Brondani, Lucas Pradebon; Pereira-Cenci, Tatiana; Wandsher, Vinicius Felipe; Pereira, Gabriel Kalil; Valandro, Luis Felipe; Bergoli, César Dalmolin

    2017-04-10

    Resin cements are often used for single crown cementation due to their physical properties. Self-adhesive resin cements gained widespread due to their simplified technique compared to regular resin cement. However, there is lacking clinical evidence about the long-term behavior of this material. The aim of this prospective clinical trial was to assess the survival rates of metal-ceramic crowns cemented with self-adhesive resin cement up to six years. One hundred and twenty-nine subjects received 152 metal-ceramic crowns. The cementation procedures were standardized and performed by previously trained operators. The crowns were assessed as to primary outcome (debonding) and FDI criteria. Statistical analysis was performed using Kaplan-Meier statistics and descriptive analysis. Three failures occurred (debonding), resulting in a 97.6% survival rate. FDI criteria assessment resulted in scores 1 and 2 (acceptable clinical evaluation) for all surviving crowns. The use of self-adhesive resin cement is a feasible alternative for metal-ceramic crowns cementation, achieving high and adequate survival rates.

  4. Light Pollution Awareness through Globe at Night & IYL2015

    Science.gov (United States)

    Walker, Constance E.

    2015-01-01

    The International Astronomical Union (IAU) will be coordinating extensive activities to raise awareness of light pollution through running the Cosmic Light theme of the International Year of Light (IYL2015) and by partnering in particular with the popular Globe at Night program.Globe at Night (www.globeatnight.org) is an international campaign to raise public awareness of the impact of light pollution by having people measure night-sky brightness and submit observations in real-time with smart phone or later with a computer. In 2015, Globe at Night will run for 10-nights each month, an hour after sunset til before the Moon rises. Students can use the data to monitor levels of light pollution around the world, as well as understand light pollution's effects on energy consumption, plants, wildlife, human health and our ability to enjoy a starry night sky.Since its inception in 2006, more than 115,000 measurements from 115 countries have been reported. The last 9 years of data can be explored with Globe at Night's interactive world map or with the 'map app' to view a particular area. A spreadsheet of the data is downloadable from any year. One can compare Globe at Night data with a variety of other databases to see, for example, how light pollution affects the foraging habits of bats.To encourage public participation in Globe at Night during IYL2015, each month will target an area of the world that habitually contributes during that time. Special concerns for how light pollution affects that area and solutions will be featured on the Globe at Night website (www.globeatnight.org), through its Facebook page, in its newsletter or in the 365DaysofAstronomy.org podcasts.Twice during IYL there will be a global Flash Mob event, one on Super Pi Day (March 14, 2015) and a second in mid-September, where the public will be invited to take night-sky brightness measurements en masse. In April, the International Dark-Sky Week hosted by the International Dark-Sky Association will be

  5. Vision and foraging in cormorants: more like herons than hawks?

    Directory of Open Access Journals (Sweden)

    Craig R White

    Full Text Available BACKGROUND: Great cormorants (Phalacrocorax carbo L. show the highest known foraging yield for a marine predator and they are often perceived to be in conflict with human economic interests. They are generally regarded as visually-guided, pursuit-dive foragers, so it would be expected that cormorants have excellent vision much like aerial predators, such as hawks which detect and pursue prey from a distance. Indeed cormorant eyes appear to show some specific adaptations to the amphibious life style. They are reported to have a highly pliable lens and powerful intraocular muscles which are thought to accommodate for the loss of corneal refractive power that accompanies immersion and ensures a well focussed image on the retina. However, nothing is known of the visual performance of these birds and how this might influence their prey capture technique. METHODOLOGY/PRINCIPAL FINDINGS: We measured the aquatic visual acuity of great cormorants under a range of viewing conditions (illuminance, target contrast, viewing distance and found it to be unexpectedly poor. Cormorant visual acuity under a range of viewing conditions is in fact comparable to unaided humans under water, and very inferior to that of aerial predators. We present a prey detectability model based upon the known acuity of cormorants at different illuminances, target contrasts and viewing distances. This shows that cormorants are able to detect individual prey only at close range (less than 1 m. CONCLUSIONS/SIGNIFICANCE: We conclude that cormorants are not the aquatic equivalent of hawks. Their efficient hunting involves the use of specialised foraging techniques which employ brief short-distance pursuit and/or rapid neck extension to capture prey that is visually detected or flushed only at short range. This technique appears to be driven proximately by the cormorant's limited visual capacities, and is analogous to the foraging techniques employed by herons.

  6. A night with good vibrations

    CERN Multimedia

    2002-01-01

    For its third edition, the Museum d'histoire des sciences invites you to a Science Night under the banner of waves and undulations. Scientists, artists and storytellers from more than forty institutes and local or regional associations will show in only one weekend that waves and undulations form an integral part of our daily environment. Telephones, televisions, radios, irons, lighting, music, sun rays, stars, rainbows, earthquakes and other natural phenomena - all produce, emit or receive waves or undulations. The visitors attending the Night will be able to get in contact with the nature of waves through interactive exhibitions on sound and light and through hands-on demonstrations arranged around the Bartholoni villa and in the Park of the Perle du lac. An amusing and distracting way to familiarize yourself with the concepts of wavelength, frequency and interference lengths... In addition to the stands, the Night will offer many other activities: reconstructions of critical experiments, scientific consu...

  7. A night with good vibrations

    CERN Multimedia

    2002-01-01

    Next week-end, the Geneva Science History Museum invites you to a Science Night under the banner of waves and vibrations. Scientists, artists and storytellers from more than forty institutes and local or regional associations will show that waves and vibrations form an integral part of our environment. You will be able to get in contact with the nature of waves through interactive exhibitions on sound and light and through hands-on demonstrations arranged in the Park of the Perle du Lac. On the CERN stand, you will be able to measure the speed of light with a bar of chocolate, and understand the scattering of waves with plastic ducks. Amazing, no? In addition to the stands, the Night will offer many other activities: reconstructions of experiments, a play, a concert of crystal glasses, an illuminated fountain, a house of spirits. More information Science Night, 6 and 7 July, Park of the Perle du Lac, Geneva

  8. Stochastic Mixed-Effects Parameters Bertalanffy Process, with Applications to Tree Crown Width Modeling

    Directory of Open Access Journals (Sweden)

    Petras Rupšys

    2015-01-01

    Full Text Available A stochastic modeling approach based on the Bertalanffy law gained interest due to its ability to produce more accurate results than the deterministic approaches. We examine tree crown width dynamic with the Bertalanffy type stochastic differential equation (SDE and mixed-effects parameters. In this study, we demonstrate how this simple model can be used to calculate predictions of crown width. We propose a parameter estimation method and computational guidelines. The primary goal of the study was to estimate the parameters by considering discrete sampling of the diameter at breast height and crown width and by using maximum likelihood procedure. Performance statistics for the crown width equation include statistical indexes and analysis of residuals. We use data provided by the Lithuanian National Forest Inventory from Scots pine trees to illustrate issues of our modeling technique. Comparison of the predicted crown width values of mixed-effects parameters model with those obtained using fixed-effects parameters model demonstrates the predictive power of the stochastic differential equations model with mixed-effects parameters. All results were implemented in a symbolic algebra system MAPLE.

  9. Tree crown structure indicators in a natural uneven-aged mixed coniferous forest in northeastern Mexico

    Science.gov (United States)

    Javier Jimenez-Perez; Oscar Aguirre-Calderon; Horst Kramer

    2006-01-01

    Characterization of tree crown structure provides critical information to assess a variety of ecological conditions for multiple purposes and applications. For biomass growth, for example, tree crowns have basic physiological functions: assimilation, respiration, and transpiration. How tree crowns spatially interact and grow can bring about a seamless landscape of...

  10. Night vision goggle stimulation using LCoS and DLP projection technology, which is better?

    Science.gov (United States)

    Ali, Masoud H.; Lyon, Paul; De Meerleer, Peter

    2014-06-01

    High fidelity night-vision training has become important for many of the simulation systems being procured today. The end-users of these simulation-training systems prefer using their actual night-vision goggle (NVG) headsets. This requires that the visual display system stimulate the NVGs in a realistic way. Historically NVG stimulation was done with cathode-ray tube (CRT) projectors. However, this technology became obsolete and in recent years training simulators do NVG stimulation with laser, LCoS and DLP projectors. The LCoS and DLP projection technologies have emerged as the preferred approach for the stimulation of NVGs. Both LCoS and DLP technologies have advantages and disadvantages for stimulating NVGs. LCoS projectors can have more than 5-10 times the contrast capability of DLP projectors. The larger the difference between the projected black level and the brightest object in a scene, the better the NVG stimulation effects can be. This is an advantage of LCoS technology, especially when the proper NVG wavelengths are used. Single-chip DLP projectors, even though they have much reduced contrast compared to LCoS projectors, can use LED illuminators in a sequential red-green-blue fashion to create a projected image. It is straightforward to add an extra infrared (NVG wavelength) LED into this sequential chain of LED illumination. The content of this NVG channel can be independent of the visible scene, which allows effects to be added that can compensate for the lack of contrast inherent in a DLP device. This paper will expand on the differences between LCoS and DLP projectors for stimulating NVGs and summarize the benefits of both in night-vision simulation training systems.

  11. Temporal trends (1989–2011) in levels of mercury and other heavy metals in feathers of fledgling great egrets nesting in Barnegat Bay, NJ

    International Nuclear Information System (INIS)

    Burger, Joanna

    2013-01-01

    There is an abundance of data for levels of metals from a range of species, but relatively few long-term time series from the same location. In this paper I examine the levels of arsenic, cadmium, chromium, lead, manganese, mercury and selenium in feathers from fledgling great egrets (Ardea alba) collected at nesting colonies in Barnegat Bay, New Jersey from 1989 to 2011. The primary objectives were to test the null hypotheses that (1) There were no temporal differences in metal levels in feathers of fledgling great egrets, and (2) Great egrets nesting in different areas of Barnegat Bay (New Jersey) did not differ in metal levels. There were significant yearly variations in levels of all heavy metals in feathers of fledgling great egret, but levels decreased significantly from 1989 to 2011 only for lead (1470 ppb to 54.3 ppb), cadmium (277 ppb to 30.5 ppb), and manganese (only since 1996; 2669 ppb to 329 ppb)). Although mercury levels decreased from 2003–2008 (6430 ppb to 1042 ppb), there was no pattern before 2003, and levels increased after 2008 to 2610 ppb in 2011. Lead, cadmium, chromium, manganese and mercury were higher in feathers from great egrets nesting in the northern part of the bay, and selenium was highest in feathers from mid-bay. The lack of a temporal decline in mercury levels in feathers of great egrets is cause for concern, since the high levels in feathers from some years (means as high as 6430 ppb) are in the range associated with adverse effects (5000 ppb for feathers). -- Highlights: ► Metals were monitored in feathers of great egrets from Barnegat Bay, New Jersey. ► Levels of cadmium and lead decreased significantly from 1989–2011. ► Mercury levels in feathers from great egrets did not decline from 1989–2011. ► Metal levels were generally higher in great egrets and black-crowned night heron feathers than in snowy egrets

  12. [Cervical adaptation of complete cast crowns of various metal alloys, with and without die spacers].

    Science.gov (United States)

    Stephano, C B; Roselino, R F; Roselino, R B; Campos, G M

    1989-01-01

    A metallic replica from a dental preparation for crown was used to make 8 class-IV stone dies. The wax patterns for the casting of the crowns were obtained in two conditions: a) from the stone die with no spacer; and b) from the stone die with an acrylic spacer. Thus, 64 metallic crowns were casted, using 4 different alloys: DURACAST (Cu-Al), NICROCAST (Ni-Cr) and DURABOND (Ni-Cr), and gold. The casted crowns were fitted in the metallic replica and measured as to the cervical discrepance of fitting. The results showed that the use of die spacers decreases the clinical discrepancies of fitting of the casted crowns (in a statistically significant level), no matter the metallic alloy employed.

  13. Wavelength selection in the crown splash

    Science.gov (United States)

    Zhang, Li V.; Brunet, Philippe; Eggers, Jens; Deegan, Robert D.

    2010-12-01

    The impact of a drop onto a liquid layer produces a splash that results from the ejection and dissolution of one or more liquid sheets, which expand radially from the point of impact. In the crown splash parameter regime, secondary droplets appear at fairly regularly spaced intervals along the rim of the sheet. By performing many experiments for the same parameter values, we measure the spectrum of small-amplitude perturbations growing on the rim. We show that for a range of parameters in the crown splash regime, the generation of secondary droplets results from a Rayleigh-Plateau instability of the rim, whose shape is almost cylindrical. In our theoretical calculation, we include the time dependence of the base state. The remaining irregularity of the pattern is explained by the finite width of the Rayleigh-Plateau dispersion relation. Alternative mechanisms, such as the Rayleigh-Taylor instability, can be excluded for the experimental parameters of our study.

  14. Scalpel Depigmentation and Surgical Crown Lengthening to ...

    African Journals Online (AJOL)

    level of the apices of the six maxillary anterior teeth. Maxillary canines and ... requires osseous resection surgeries whereas excessive gingival display due to ... this case included complete oral prophylaxis along aesthetic crown lengthening ...

  15. Reversed phase partition chromatographic separation of Gd(III) on poly(Crown Ether) column

    International Nuclear Information System (INIS)

    Mahanwar, K.R.; Sabale, S.R.

    2014-01-01

    A simple method has been developed for the separation of Gd(III) in hippuric acid medium by using poly(dibenzo-18-crown-6) as stationary phase. The effect of hippuric acid concentration, different eluting agent, foreign ions etc was studied and the optimum conditions were established. Breakthrough capacity of poly(dibenzo-18-crown-6) for Gd(III) was found to be 0.572 ±0.01 mmolg -1 of crown polymer. The separation of Gd(III) from other elements in multicomponent mixtures has been achieved. The method was extended for determination of Gd(III) in real sample. The method is simple, rapid and selective with good reproducibility (approximately ± 2%). Crown ethers are widely used as complexing agent that can selectively capture metal cation in their cavity. This special feature shown by poly (dibenzo-18-crown-6) has been used in our laboratory for selective cation exchanger by column chromatography. No attempts were made for the separation of Gd(III) using hippuric acid media and column chromatography. The present communication describes a simple and sensitive method for the determination of Gd(III) using poly(dibenzo-18-crown-6) as stationary phase in hippuric acid medium. The proposed method affords an attractive feature as compared to the solvent extraction technique i.e. it is free from any organic diluents as an environmental concern

  16. Fracture resistance of 3 types of primary esthetic stainless steel crowns.

    Science.gov (United States)

    Beattie, Sean; Taskonak, Burak; Jones, James; Chin, Judith; Sanders, Brian; Tomlin, Angela; Weddell, James

    2011-01-01

    Demand is increasing for esthetic restorations in pediatric dentistry. When full coverage is indicated, one option is to use esthetic stainless steel crowns (SSCs). However, this type of crown is prone to fracture. The purpose of this study was to evaluate the fracture resistance of 3 types of esthetic SSCs. Esthetic SSCs for first primary mandibular molars were cemented to idealized epoxy dies with glass ionomer cement. The die-crown units were fractured on a universal testing machine. The force was delivered by a stainless steel ball fixture, set in a uniaxial lever to replicate a cusp contact, with a crosshead speed of 1 mm/min. The differences among the 3 types of crown, in terms of force required to fracture, were compared statistically by 1-way analysis of variance. Pairwise comparisons were performed with Fisher's protected least significant difference test, at an overall significance level of 5%. The force required to fracture, expressed as average ± standard error, did not differ significantly among the 3 brands of esthetic SSCs: 1730 N ± 50 N, 1826 N ± 62 N and 1671 N ± 68 N, respectively (p = 0.19), well below the maximum bite force of pediatric patients determined in a previous study. Esthetic SSCs should be able to resist occlusal forces over short clinical periods. However, long-term occlusal loading and fatigue failures should be taken into account when evaluating the success of this type of crown.

  17. Relationship between crown placement and the survival of endodontically treated teeth.

    Science.gov (United States)

    Aquilino, Steven A; Caplan, Daniel J

    2002-03-01

    Crowns have been considered the restoration of choice for endodontically treated teeth, but their selection has been based primarily on anecdotal evidence. This study tested the hypothesis that crown placement (coronal coverage) is associated with improved survival of endodontically treated teeth when preaccess, endodontic, and restorative factors are controlled. A University of Iowa College of Dentistry treatment database was used to identify permanent teeth that had undergone initial obturation between July 1, 1985, and December 31, 1987. Study patients were restricted to persons with at least 1 dental visit in each 2-year interval from 1985 to 1996; a simple random sample of 280 patients (n = 400 teeth) was selected. Dental charts, radiographs, and computerized databases were examined to ascertain variables of interest and to verify study inclusion criteria. Kaplan-Meier survival estimates were generated for the 203 teeth that satisfied study inclusion criteria. Multivariate Cox proportional hazards regression models were developed, with standard errors adjusted to account for clustering of teeth within patients. When tooth type and radiographic evidence of caries at access were controlled, the final Cox model showed that endodontically treated teeth not crowned after obturation were lost at a 6.0 times greater rate than teeth crowned after obturation (95% confidence interval: 3.2 to 11.3). Within the limitations of this study, a strong association between crown placement and the survival of endodontically treated teeth was observed. These results may impact treatment planning if long-term tooth retention is the primary goal.

  18. Dental students' preferences and performance in crown design: conventional wax-added versus CAD.

    Science.gov (United States)

    Douglas, R Duane; Hopp, Christa D; Augustin, Marcus A

    2014-12-01

    The purpose of this study was to evaluate dental students' perceptions of traditional waxing vs. computer-aided crown design and to determine the effectiveness of either technique through comparative grading of the final products. On one of twoidentical tooth preparations, second-year students at one dental school fabricated a wax pattern for a full contour crown; on the second tooth preparation, the same students designed and fabricated an all-ceramic crown using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology. Projects were graded for occlusion and anatomic form by three faculty members. On completion of the projects, 100 percent of the students (n=50) completed an eight-question, five-point Likert scalesurvey, designed to assess their perceptions of and learning associated with the two design techniques. The average grades for the crown design projects were 78.3 (CAD) and 79.1 (wax design). The mean numbers of occlusal contacts were 3.8 (CAD) and 2.9(wax design), which was significantly higher for CAD (p=0.02). The survey results indicated that students enjoyed designing afull contour crown using CAD as compared to using conventional wax techniques and spent less time designing the crown using CAD. From a learning perspective, students felt that they learned more about position and the size/strength of occlusal contacts using CAD. However, students recognized that CAD technology has limits in terms of representing anatomic contours and excursive occlusion compared to conventional wax techniques. The results suggest that crown design using CAD could be considered as an adjunct to conventional wax-added techniques in preclinical fixed prosthodontic curricula.

  19. Effect of elasticity on stress distribution in CAD/CAM dental crowns: Glass ceramic vs. polymer-matrix composite.

    Science.gov (United States)

    Duan, Yuanyuan; Griggs, Jason A

    2015-06-01

    Further investigations are required to evaluate the mechanical behaviour of newly developed polymer-matrix composite (PMC) blocks for computer-aided design/computer-aided manufacturing (CAD/CAM) applications. The purpose of this study was to investigate the effect of elasticity on the stress distribution in dental crowns made of glass-ceramic and PMC materials using finite element (FE) analysis. Elastic constants of two materials were determined by ultrasonic pulse velocity using an acoustic thickness gauge. Three-dimensional solid models of a full-coverage dental crown on a first mandibular molar were generated based on X-ray micro-CT scanning images. A variety of load case-material property combinations were simulated and conducted using FE analysis. The first principal stress distribution in the crown and luting agent was plotted and analyzed. The glass-ceramic crown had stress concentrations on the occlusal surface surrounding the area of loading and the cemented surface underneath the area of loading, while the PMC crown had only stress concentration on the occlusal surface. The PMC crown had lower maximum stress than the glass-ceramic crown in all load cases, but this difference was not substantial when the loading had a lateral component. Eccentric loading did not substantially increase the maximum stress in the prosthesis. Both materials are resistant to fracture with physiological occlusal load. The PMC crown had lower maximum stress than the glass-ceramic crown, but the effect of a lateral loading component was more pronounced for a PMC crown than for a glass-ceramic crown. Knowledge of the stress distribution in dental crowns with low modulus of elasticity will aid clinicians in planning treatments that include such restorations. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Polyacrylonitrile (PAN)/crown ether composite nanofibers for the selective adsorption of cations

    NARCIS (Netherlands)

    Tas, Sinem; Kaynan, Ozge; Ozden-Yenigun, Elif; Nijmeijer, Dorothea C.

    2016-01-01

    In this study, we prepared electrospun polyacrylonitrile (PAN) nanofibers functionalized with dibenzo-18-crown-6 (DB18C6) crown ether and showed the potential of these fibers for the selective recovery of K+ from other both mono- and divalent ions in aqueous solutions. Nanofibers were characterized

  1. [Comparative study of microleakage by using different finished lines in selective laser melting metal crowns].

    Science.gov (United States)

    Peng, Yan; Zhong, Qun; Wu, Xue-Ying; Weng, Jia-Wei

    2016-12-01

    To evaluate microleakage of SLM Co -Cr alloy metal crown with two types finished line (chamfer and shoulder), compared with conventional fabrication of Co -Cr alloy metal crowns. Thirty healthy non-carious human molars were selected and randomly assigned to 3 groups, 10 in each. Teeth in group A and C received a chamfer finish line preparation, whereas teeth in group C received a shoulder finish line. Conventional Co -Cr alloy metal crowns were fabricated for group A when SLM metal crowns were made for group B and group C. Glass ionomer was applied for bonding. After 5000 thermocycles ranging from 5degrees centigrade to 55degrees centigrade,all the specimens were evaluated by dye penetration and then microleakage was examined under light microscope. The data were analyzed statistically with SPSS 20.0 software package. Microleakage in group A was significantly higher than the other two groups, group B and group C showed no significant difference in microleakage while microleakage in group B was higher than that in group C. Microleakage of SLM metal crowns was significantly less than that of conventional Co-Cr alloy metal crowns; chamfer finish line designs was recommended for SLM metal crowns in consideration of reducing microleakage and protecting tooth.

  2. Childhood night terrors and sleepwalking: diagnosis and treatment

    OpenAIRE

    Sachin Ratan Gedam; Pradeep S. Patil; Imran Ali Shivji

    2017-01-01

    Night terrors and sleepwalking are arousal disorders that occur during the first third of night. Combined existence of sleep disorders are rare phenomenon and found to be associated with behavioural and emotional problems. It becomes difficult to diagnose among sleep disorders and epilepsy is an important differential diagnosis. Management with combined approach of pharmacotherapy and psychological counselling is safe and effective. Here, we present a case of night terrors and sleepwalking to...

  3. Plastic collapse load of crown-hinged steel circular arches : a theoretical method

    NARCIS (Netherlands)

    Spoorenberg, R.C.; Snijder, H.H.; Hoenderkamp, J.C.D.

    2013-01-01

    For construction purposes and to avoid detrimental influences of foundation settlements arches are not always made from a single arch-rib but are built by connecting two curvilinear elements at the crown with a hinge. These arches are also known as crown-hinged arches. This paper presents an

  4. Modeling the spatial distribution of forest crown biomass and effects on fire behavior with FUEL3D and WFDS

    Science.gov (United States)

    Russell A. Parsons; William Mell; Peter McCauley

    2010-01-01

    Crown fire poses challenges to fire managers and can endanger fire fighters. Understanding of how fire interacts with tree crowns is essential to informed decisions about crown fire. Current operational crown fire predictions in the United States assume homogeneous crown fuels. While a new class of research fire models, which model fire behavior with computational...

  5. Rock mechanics of crown pillars between cut-and-fill stopes at the Mount Isa mine

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M. F.; Bridges, M. C.

    1980-05-15

    At both levels, the leading stopes experienced bad ground conditions due to high stresses in the stope's backs when the crown pillars were about 35 m high. At 9 level, cut-and-fill mining stopped and most of the crown pillars were extracted by a slot-and-massfire method. At 11 level, cut-and-fill mining continued. Shear displacement along bedding planes began within and around the crown pillars of the leading stopes at 11 level, and spread through other crown pillars and to the hangingwall of the stoping system. Destressing and good ground conditions occurred where shear occurred, with further concentrations of stress in other areas. Crown pillars are being extracted to leave minimal 1:2 height to width diaphragms under the stopes above. Ground behavior of the 11 level crown pillars was investigated by observation, stress measurement, regional surveying of displacement and finite element models. An explanation of the ground behavior has evolved from this work. Bedding planes with an estimated angle of sliding friction of 10/sup 0/ were the main factor determining the behavior of this area.

  6. Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study

    Directory of Open Access Journals (Sweden)

    Lucas Pradebon BRONDANI

    2017-04-01

    Full Text Available Abstract Resin cements are often used for single crown cementation due to their physical properties. Self-adhesive resin cements gained widespread due to their simplified technique compared to regular resin cement. However, there is lacking clinical evidence about the long-term behavior of this material. The aim of this prospective clinical trial was to assess the survival rates of metal-ceramic crowns cemented with self-adhesive resin cement up to six years. One hundred and twenty-nine subjects received 152 metal-ceramic crowns. The cementation procedures were standardized and performed by previously trained operators. The crowns were assessed as to primary outcome (debonding and FDI criteria. Statistical analysis was performed using Kaplan-Meier statistics and descriptive analysis. Three failures occurred (debonding, resulting in a 97.6% survival rate. FDI criteria assessment resulted in scores 1 and 2 (acceptable clinical evaluation for all surviving crowns. The use of self-adhesive resin cement is a feasible alternative for metal-ceramic crowns cementation, achieving high and adequate survival rates.

  7. Working night shifts affects surgeons' biological rhythm

    DEFF Research Database (Denmark)

    Amirian, Ilda; Andersen, Lærke T; Rosenberg, Jacob

    2015-01-01

    BACKGROUND: Chronic sleep deprivation combined with work during the night is known to affect performance and compromise residents' own safety. The aim of this study was to examine markers of circadian rhythm and the sleep-wake cycle in surgeons working night shifts. METHODS: Surgeons were monitor...

  8. Fracture resistance of metal-free composite crowns-effects of fiber reinforcement, thermal cycling, and cementation technique.

    Science.gov (United States)

    Lehmann, Franziska; Eickemeyer, Grit; Rammelsberg, Peter

    2004-09-01

    The improved mechanical properties of contemporary composites have resulted in their extensive use for the restoration of posterior teeth. However, the influence of fiber reinforcement, cementation technique, and physical stress on the fracture resistance of metal-free crowns is unknown. This in vitro study evaluated the effect of fiber reinforcement, physical stress, and cementation methods on the fracture resistance of posterior metal-free Sinfony crowns. Ninety-six extracted human third molars received a standardized tooth preparation: 0.5-mm chamfer preparation and occlusal reduction of 1.3 to 1.5 mm. Sinfony (nonreinforced crowns, n=48) and Sinfony-Vectris (reinforced crowns, n=48) crowns restoring original tooth contour were prepared. Twenty-four specimens of each crown type were cemented, using either glass ionomer cement (GIC) or resin cement. Thirty-two crowns (one third) were stored in humidity for 48 hours. Another third was exposed to 10,000 thermal cycles (TC) between 5 degrees C and 55 degrees C. The remaining third was treated with thermal cycling and mechanical loading (TCML), consisting of 1.2 million axial loads of 50 N. The artificial crowns were then vertically loaded with a steel sphere until failure occurred. Significant differences in fracture resistance (N) between experimental groups were assessed by nonparametric Mann-Whitney U-test (alpha=.05). Fifty percent of the Sinfony and Sinfony-Vectris crowns cemented with glass ionomer cement loosened after thermal cycling. Thermal cycling resulted in a significant reduction in the mean fracture resistance for Sinfony crowns cemented with GIC, from 2037 N to 1282 N (P=.004). Additional fatigue produced no further effects. Fiber reinforcement significantly increased fracture resistance, from 1555 N to 2326 N (P=.001). The minimal fracture resistance was above 600 N for all combinations of material, cement and loading. Fracture resistance of metal-free Sinfony crowns was significantly increased by

  9. MULTISEASONAL TREE CROWN STRUCTURE MAPPING WITH POINT CLOUDS FROM OTS QUADROCOPTER SYSTEMS

    Directory of Open Access Journals (Sweden)

    S. Hese

    2017-08-01

    Full Text Available OTF (Off The Shelf quadro copter systems provide a cost effective (below 2000 Euro, flexible and mobile platform for high resolution point cloud mapping. Various studies showed the full potential of these small and flexible platforms. Especially in very tight and complex 3D environments the automatic obstacle avoidance, low copter weight, long flight times and precise maneuvering are important advantages of these small OTS systems in comparison with larger octocopter systems. This study examines the potential of the DJI Phantom 4 pro series and the Phantom 3A series for within-stand and forest tree crown 3D point cloud mapping using both within stand oblique imaging in different altitude levels and data captured from a nadir perspective. On a test site in Brandenburg/Germany a beach crown was selected and measured with 3 different altitude levels in Point Of Interest (POI mode with oblique data capturing and deriving one nadir mosaic created with 85/85 % overlap using Drone Deploy automatic mapping software. Three different flight campaigns were performed, one in September 2016 (leaf-on, one in March 2017 (leaf-off and one in May 2017 (leaf-on to derive point clouds from different crown structure and phenological situations – covering the leaf-on and leafoff status of the tree crown. After height correction, the point clouds where used with GPS geo referencing to calculate voxel based densities on 50 × 10 × 10 cm voxel definitions using a topological network of chessboard image objects in 0,5 m height steps in an object based image processing environment. Comparison between leaf-off and leaf-on status was done on volume pixel definitions comparing the attributed point densities per volume and plotting the resulting values as a function of distance to the crown center. In the leaf-off status SFM (structure from motion algorithms clearly identified the central stem and also secondary branch systems. While the penetration into the

  10. Multiseasonal Tree Crown Structure Mapping with Point Clouds from OTS Quadrocopter Systems

    Science.gov (United States)

    Hese, S.; Behrendt, F.

    2017-08-01

    OTF (Off The Shelf) quadro copter systems provide a cost effective (below 2000 Euro), flexible and mobile platform for high resolution point cloud mapping. Various studies showed the full potential of these small and flexible platforms. Especially in very tight and complex 3D environments the automatic obstacle avoidance, low copter weight, long flight times and precise maneuvering are important advantages of these small OTS systems in comparison with larger octocopter systems. This study examines the potential of the DJI Phantom 4 pro series and the Phantom 3A series for within-stand and forest tree crown 3D point cloud mapping using both within stand oblique imaging in different altitude levels and data captured from a nadir perspective. On a test site in Brandenburg/Germany a beach crown was selected and measured with 3 different altitude levels in Point Of Interest (POI) mode with oblique data capturing and deriving one nadir mosaic created with 85/85 % overlap using Drone Deploy automatic mapping software. Three different flight campaigns were performed, one in September 2016 (leaf-on), one in March 2017 (leaf-off) and one in May 2017 (leaf-on) to derive point clouds from different crown structure and phenological situations - covering the leaf-on and leafoff status of the tree crown. After height correction, the point clouds where used with GPS geo referencing to calculate voxel based densities on 50 × 10 × 10 cm voxel definitions using a topological network of chessboard image objects in 0,5 m height steps in an object based image processing environment. Comparison between leaf-off and leaf-on status was done on volume pixel definitions comparing the attributed point densities per volume and plotting the resulting values as a function of distance to the crown center. In the leaf-off status SFM (structure from motion) algorithms clearly identified the central stem and also secondary branch systems. While the penetration into the crown

  11. Day and night grazing by cattle in the Sahel

    NARCIS (Netherlands)

    Ayantunde, A.A.; Fernandez-Rivera, S.; Hiernaux, P.H.; Keulen, van H.; Udo, H.M.J.

    2002-01-01

    The influence of night grazing on feeding behavior, nutrition and performance of cattle was studied. Twenty-four steers weighing 367 kg (SD = 76) grazed either from 0900 to 1900 (day grazers), 2100 to 0700 (night grazers) or 0900 to 1900 and 2400 to 0400 (day-and-night grazers) during 13 weeks. Four

  12. A prospective study of the incidence of asymptomatic pulp necrosis following crown preparation.

    Science.gov (United States)

    Kontakiotis, E G; Filippatos, C G; Stefopoulos, S; Tzanetakis, G N

    2015-06-01

    To determine the incidence of asymptomatic pulp necrosis following crown preparation as well as the positive predictive value of the electric pulp testing. A total of 120 teeth with healthy pulps scheduled to receive fixed crowns (experimental teeth) were included. Teeth were divided into two groups according to the preoperative crown condition (intact teeth and teeth with preoperative caries, restorations or crowns) and into four groups according to tooth type (maxillary anterior teeth, maxillary posterior teeth, mandibular anterior teeth and mandibular posterior teeth). Experimental and control teeth were submitted to electric pulp testing on three different occasions before treatment commencement (stage 0), at the impression making session (stage 1) and just before the final cementation of the crown (stage 2). Teeth that were considered to contain necrotic pulps were submitted to root canal treatment. Upon access, absence of bleeding was considered as a confirmation of pulp necrosis. Data were analysed using bivariate (chi-square) and multivariate analysis (logistic regression). All reported probability values (P-values) were based on two-sided tests and compared to a significance level of 5%. The overall incidence of pulp necrosis was 9%. Intact teeth had a significantly lower incidence of pulp necrosis (5%) compared with preoperatively structurally compromised teeth (13%) [(OR: 9.113, P = 0.035)]. No significant differences were found amongst the four groups with regard to tooth type (P = 0.923). The positive predictive value of the electric pulp testing was 1.00. The incidence of asymptomatic pulp necrosis of teeth following crown preparation is noteworthy. The presence of preoperative caries, restorations or crowns of experimental teeth correlated with a significantly higher incidence of pulp necrosis. Electric pulp testing remains a useful diagnostic instrument for determining the pulp condition. © 2014 International Endodontic Journal. Published by

  13. Etiology and Population Genetics of Colletotrichum spp. Causing Crown and Fruit Rot of Strawberry.

    Science.gov (United States)

    Ureña-Padilla, A R; Mackenzie, S J; Bowen, B W; Legard, D E

    2002-11-01

    ABSTRACT Isolates of Colletotrichum spp. from diseased strawberry fruit and crowns were evaluated to determine their genetic diversity and the etiology of the diseases. Isolates were identified to species using polymerase chain reaction primers for a ribosomal internal transcribed spacer region and their pathogenicity was evaluated in bioassays. Isolates were scored for variation at 40 putative genetic loci with random amplified polymorphic DNA and microsatellite markers. Only C. acutatum was recovered from diseased fruit. Nearly all isolates from crowns were C. gloeosporioides. In crown bioassays, only isolates of C. gloeosporioides from strawberry caused collapse and death of plants. A dendrogram generated from the genetic analysis identified several primary lineages. One lineage included isolates of C. acutatum from fruit and was characterized by low diversity. Another lineage included isolates of C. gloeosporioides from crowns and was highly polymorphic. The isolates from strawberry formed distinctive clusters separate from citrus isolates. Evaluation of linkage disequilibrium among polymorphic loci in isolates of C. gloeosporioides from crowns revealed a low level of disequilibrium as would be expected in sexually recombining populations. These results suggest that epidemics of crown rot are caused by Glomerella cingulata (anamorph C. gloeosporioides) and that epidemics of fruit rot are caused by C. acutatum.

  14. Changes of mercury contamination in red-crowned cranes, Grus japonensis, in East Hokkaido, Japan.

    Science.gov (United States)

    Teraoka, Hiroki; Tagami, Yukari; Kudo, Moe; Miura, Yoshiaki; Okamoto, Erika; Matsumoto, Fumio; Koga, Kimiya; Uebayashi, Akiko; Shimura, Ryoji; Inoue, Masako; Momose, Kunikazu; Masatomi, Hiroyuki; Kitazawa, Takio; Hiraga, Takeo; Subramanian, Annamalai

    2012-07-01

    Red-crowned cranes (Grus japonensis) are native to eastern Hokkaido (island population), in contrast to the mainland, which migrates between the Amur River basin and eastern China-Korea peninsula. During the 1990s we found that Red-crowned cranes in Hokkaido were highly contaminated with mercury: however, the source was unknown. We investigated the time trend of mercury contamination in Red-crowned cranes. Total mercury levels in the livers and kidneys from cranes dead in the 2000s were lower than those dead in the 1990s. Feather is a major pathway of mercury excretion for many bird species and is used as an indicator of blood mercury level during feather growth. As internal organs from the specimens collected before 1988 were not available, we analyzed the flight feather shavings from stuffed Red-crowned cranes dead in 1959-1987 and found that the mercury level of feathers from cranes dead in the 1960s and 1970s was not more than those from the cranes dead in the 2000s. These results suggest that mercury contamination in Red-crowned cranes in Hokkaido decreased temporally during the 1990s-2000s. This indicates the possible occurrence of some mercury pollution in Red-crowned cranes' habitat in this region in the 1990s or before.

  15. In vitro analysis of the marginal adaptation and discrepancy of stainless steel crowns

    Science.gov (United States)

    Mulder, Riaan; Medhat, Rasha; Mohamed, Nadia

    2018-01-01

    Abstract Aim: The purpose of the study was to assess the marginal adaptation and discrepancy of SSC’s. Differences in adaptation and discrepancy between the four surfaces (mesial, lingual, distal, and buccal) were evaluated. Methods: The placement of stainless steel crowns were completed on a phantom head in accordance with the clinical technique. The ideal tooth preparation was made and this ‘master tooth’ duplicated to achieve a sample size of 15. The stainless steel crowns were placed, trimmed, and cemented as per the clinical technique. The cemented stainless crowns were analyzed under 100× stereomicroscope magnification. The marginal adaptation and discrepancy of each specimen was measured every 2 µm. Results: All the specimens showed marginal adaptation and discrepancy. The lingual margin had a significantly better adaptation (p steel crown adaptation and discrepancy is an essential clinical step. PMID:29536024

  16. 78 FR 63559 - Order of Suspension of Trading; In The Matter of Crown Alliance Capital Limited

    Science.gov (United States)

    2013-10-24

    ... Alliance Capital Limited (``Crown Alliance''), quoted under the ticker symbol CACL, because of questions regarding the accuracy of assertions in Crown Alliance's public filings concerning the company's assets and... of Crown Alliance Capital Limited October 22, 2013. It appears to the Securities and Exchange...

  17. The observer's year 366 nights in the universe

    CERN Document Server

    Moore, Patrick

    2005-01-01

    This is a night by night account of the stars. For every night of the year Sir Patrick Moore gives the reader details of interesting objects that can be seen from earth. It is a book for people with a wide interest in astronomy, those who may not have specialised in a specific area of astronomy and wish to expand their knowledge in all areas. This second edition is updated for astronomical events through until 2010.

  18. Complexation between Methyl Viologen (Paraquat) Bis(Hexafluorophosphate) and Dibenzo[24]Crown-8 Revisited

    DEFF Research Database (Denmark)

    Gasa, Travis B.; Spruell, Jason M.; Dichtel, William R.

    2009-01-01

    Paraquat bis(hexafluorophosphate) undergoes stepwise dissociation in acetone. All three species - the neutral molecule, and the mono- and dications - are represented significantly under the experimental conditions typically used in host-guest binding studies. Paraquat forms at least four host...... toward dibenzo[24]crown-8. Thus, the relative abundance of neutral, singly, and doubly charged pseudorotaxanes is identical to the relative abundance of neutral, singly, and doubly charged paraquat unbound with respect to the crown ether in acetone. In the specific case of paraquat/dibenzo[24]crown-8...

  19. Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

    Directory of Open Access Journals (Sweden)

    Vivekanandan Ramkumar

    2012-01-01

    Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

  20. Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

    Science.gov (United States)

    Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

    2012-08-01

    To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman-Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

  1. Jupiter Night and Day

    Science.gov (United States)

    2001-01-01

    Day and night side narrow angle images taken on January 1, 2001 illustrating storms visible on the day side which are the sources of visible lightning when viewed on the night side. The images have been enhanced in contrast. Note the two day-side occurrences of high clouds, in the upper and lower parts of the image, are coincident with lightning storms seen on the darkside. The storms occur at 34.5 degrees and 23.5 degrees North latitude, within one degree of the latitudes at which similar lightning features were detected by the Galileo spacecraft. The images were taken at different times. The storms' longitudinal separation changes from one image to the next because the winds carrying them blow at different speeds at the two latitudes.

  2. Travelers In The Night

    Science.gov (United States)

    Grauer, Albert D.

    2014-11-01

    Travelers In The Night is an engaging and informative series of two minute radio programs about asteroids, comets, spacecraft, and other objects in space. The pieces are evergreen in that they are current but not dated. They are published on the Public Radio Exchange and carried by a number of radio stations. For teachers, students, and kids of all ages, the script for each piece and the start of a path for further inquiry can be found on the website travelersinthenight.org . The Travelers InThe Night Pieces are written and produced by an observing member of the Catalina Sky Survey Team at the University of Arizona. DPS members are encouraged to submit program ideas which can be developed to feature their research efforts.

  3. Modelling Black Carbon concentrations in two busy street canyons in Brussels using CANSBC

    Science.gov (United States)

    Brasseur, O.; Declerck, P.; Heene, B.; Vanderstraeten, P.

    2015-01-01

    This paper focused on modelling Black Carbon (BC) concentrations in two busy street canyons, the Crown and Belliard Street in Brussels. The used original Operational Street Pollution Model was adapted to BC by eliminating the chemical module and is noted here as CANSBC. Model validations were performed using temporal BC data from the fixed measurement network in Brussels. Subsequently, BC emissions were adjusted so that simulated BC concentrations equalled the observed ones, averaged over the whole period of simulation. Direct validations were performed for the Crown Street, while BC model calculations for the Belliard Street were validated indirectly using the linear relationship between BC and NOx. Concerning the Crown Street, simulated and observed half-hourly BC concentrations correlated well (r = 0.74) for the period from July 1st, 2011 till June 30th, 2013. In particular, CANSBC performed very well to simulate the monthly and diurnal evolutions of averaged BC concentrations, as well as the difference between weekdays and weekends. This means that the model correctly handled the meteorological conditions as well as the variation in traffic emissions. Considering dispersion, it should however be noted that BC concentrations are better simulated under stable than under unstable conditions. Even if the correlation on half-hourly NOx concentrations was slightly lower (r = 0.60) than the one of BC, indirect validations of CANSBC for the Belliard Street yielded comparable results and conclusions as described above for the Crown Street. Based on our results, it can be stated that CANSBC is suitable to accurately simulate BC concentrations in the street canyons of Brussels, under the following conditions: (i) accurate vehicle counting data is available to correctly estimate traffic emissions, and (ii) vehicle speeds are measured in order to improve emission estimates and to take into account the impact of the turbulence generated by moving vehicles on the local

  4. CROWN: A service grid middleware with trust management mechanism

    Institute of Scientific and Technical Information of China (English)

    HUAI Jinpeng; HU Chunming; LI Jianxin; SUN Hailong; WO Tianyu

    2006-01-01

    Based on a proposed Web service-based grid architecture, a service grid middleware system called CROWN is designed in this paper. As the two kernel points of the middleware, the overlay-based distributed grid resource management mechanism is proposed, and the policy-based distributed access control mechanism with the capability of automatic negotiation of the access control policy and trust management and negotiation is also discussed in this paper. Experience of CROWN testbed deployment and application development shows that the middleware can support the typical scenarios such as computing-intensive applications, data-intensive applications and mass information processing applications.

  5. [Night work, shift work: Breast cancer risk factor?].

    Science.gov (United States)

    Benabu, J-C; Stoll, F; Gonzalez, M; Mathelin, C

    2015-12-01

    The aim of this review was to determine the link between night/shift work and breast cancer. The analysed articles were taken from the PUBMED database between 1996 and 2015. The keywords used were "breast cancer risk", "night work" and "shift work". In total, 25 articles were selected. Night/shift workers are more at risk to develop a breast cancer (relative risk (RR) between 1.09; 95% CI: 1.02-1.20 and 1.48; 95% CI: 1.36-1.61 in the meta-analyses). However, this risk is not found by some cohort and case-control studies. The circadian rhythm disruption, responsible of disorderliness of melatonin secretion, could be one of the mechanisms involved in the increase of that risk. Hormonal status of night/shift workers, their geographic origin, their lifestyle and their vitamin D deficiency appear as other mechanisms potentially responsible for increased risk of cancer in this professional population. Moreover, a dose-effect connection may exist, with an increase of the risk with the number of years of night/shift work. Night/shift work is associated with a moderate increased risk of breast cancer, especially among women who worked over 20 years. Recommendations concerning the breast monitoring in this population could be diffused. The benefit of melatonin supplementation remains to be assessed. Copyright © 2015. Published by Elsevier SAS.

  6. Behavioral management of night eating disorders

    Directory of Open Access Journals (Sweden)

    Berner LA

    2013-03-01

    Full Text Available Laura A Berner,1 Kelly C Allison2 1Department of Psychology, Drexel University, 2Department of Psychiatry, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USA Abstract: Night eating syndrome (NES is a form of disordered eating associated with evening hyperphagia (overeating at night and nocturnal ingestions (waking at night to eat. As with other forms of disordered eating, cognitive and behavioral treatment modalities may be effective in reducing NES symptoms. This review presents evidence for a variety of behavioral treatment approaches, including behavioral therapy, phototherapy, behavioral weight loss treatment, and cognitive-behavioral therapy. A more detailed overview of cognitive-behavioral therapy for NES is provided. All of these studies have been case studies or included small samples, and all but one have been uncontrolled, but the outcomes of many of these approaches are promising. Larger randomized controlled trials are warranted to advance NES treatment literature. With the inclusion of NES in the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5 as a “Feeding or Eating Disorder Not Elsewhere Classified,” more sophisticated, empirically-supported, behaviorally-based treatment approaches are much needed. Keywords: night eating syndrome, cognitive-behavioral treatment, phototherapy, behavioral weight loss, behavior therapy

  7. Descriptive statistics of tree crown condition in the Southern United States and impacts on data analysis and interpretation

    Science.gov (United States)

    KaDonna C. Randolph

    2006-01-01

    The U.S. Department of Agriculture Forest Service, Forest Inventory and Analysis Program (FIA) utilizes visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes and discusses distributions of three FIA crown condition indicators (crown density, crown dieback, and foliage transparency) for trees in the Southern...

  8. Supportive leadership in Swedish community night nursing.

    Science.gov (United States)

    Gustafsson, Christine; Fagerberg, Ingegerd; Asp, Margareta

    2010-10-01

    The aim of the present study was to examine the support night nurses' give to staff in community night nursing. Studies have shown that support given to staff is one of night registered nurses' (RNs') experiences of the meaning of caring. This support, that community RNs display for staff in night-time care, is sparsely described. All community night-duty nurses in a medium-sized municipal in Sweden participated in the present study. Thematic content analysis was used to analyse data from observations. The support given by RNs to staff is described using three themes: (1) a conditional supporting stance, (2) preparing propitious conditions for caring and (3) confidence in the abilities of individual staff members and adaptation to their individual needs. The results reveal that RNs consider support to staff in terms of nursing leadership. Out of 'concern for the staff' the RNs try to be there for them, which corresponds to nursing leadership. Such concern also arises from the RNs' awareness that by giving support to staff this affects the staffs' caring for older people. The current municipal social care organization of community nursing of older people in which RNs have extensive responsibilities with insufficient control, is a working condition with a risk for decreased quality of care and a high risk for work-related stress syndrome. © 2010 The Authors. Journal compilation © 2010 Blackwell Publishing Ltd.

  9. The feast "STAR NIGHT 2009" in Shumen, Bulgaria

    Science.gov (United States)

    Kyurkchieva, Diana P.

    Information about the preparation and realization of the attractive program for the "Star Night" on September 25, 2009, in Shumen, is presented. Its goal is popularization of the European initiative "Research Night" in Bulgaria.

  10. Heart rate variability changes in physicians working on night call.

    Science.gov (United States)

    Malmberg, Birgitta; Persson, Roger; Flisberg, Per; Ørbaek, Palle

    2011-03-01

    Adverse effects by night-call duty have become an important occupational health issue. The aim of this study was to investigate whether the heart rate variability (HRV) differed during recovery from day work and night-call duty between distinct physician specialities. We studied the impact of a 16-h night-call duty on autonomic balance, measured by HRV, among two physician groups differing with respect to having to deal with life-threatening conditions while on call. Nineteen anaesthesiologists (ANEST) and 16 paediatricians and ear, nose and throat surgeons (PENT) were monitored by ambulatory digital Holter electrocardiogram (ECG). Heart rate variability was analysed between 21:00 and 22:00 after an ordinary workday, on night call and in the evening post-call. Absolute and normalized high-frequency power (HF, HFnu) were the main outcome variables, expressing parasympathetic influence on the heart. ANEST had lower HF power than PENT while on night call and post-daytime work (p work compared with post-night-call duty (p balance and did not differ between specialities. However, the less dynamic HRV after daytime work and during night-call duty in the ANEST group may indicate a higher physiological stress level. These results may contribute to the improvement of night-call schedules within the health care sector.

  11. Stability constants for some divalent metal ion/crown ether complexes in methanol determined by polarography and conductometry

    NARCIS (Netherlands)

    Chen, L.; Bos, M.; Grootenhuis, P.D.J.; Christenhusz, A.; Hoogendam, E.; Reinhoudt, David; van der Linden, W.E.

    1987-01-01

    Stability constants in methanol at 25.0°C were evaluated for the complexes of the divalent cations Ca2+, Ni2+, Zn2+, Pb2+, Mg2+, Co2+ and Cu2+ with the macrocyclic polyethers 15-crown-5 (15C5), 18-crown-6 (18C6), dicyclohexyl-18-crown-6 (DC18C6) and dibenzo-24-crown-8 (DB24C8). The log K values of

  12. In vitro evaluation of the marginal fit of different all-ceramic crowns

    Directory of Open Access Journals (Sweden)

    Munir Tolga Yucel

    2013-09-01

    Conclusion: In-Ceram all-ceramic crowns showed the largest marginal gap, and Celay crowns showed the smallest marginal gap in both die groups. The marginal discrepancies found in this study were all within the clinically acceptable standard of 120 μm.

  13. Crown-root morphology of lower incisors in patients with class III malocclusion.

    Science.gov (United States)

    Wang, Bo; Shen, Guofang; Fang, Bing; Zhang, Li

    2012-07-01

    The purpose of this study was to investigate the crown-root morphology of lower incisors in patients with class III malocclusion using cone-beam computed tomography. Cone-beam computed tomography images were analyzed from 53 adult class I patients (group 1), 37 preadolescent class III patients (group 2), and 66 adult class III patients (group 3) comprising 3 divisions (divisions 1, 2, and 3 corresponded to mild, moderate, and severe class III malocclusions). The size and crown-root angulations of lower incisors in different groups and divisions were statistically appraised with group 1 used as the control group. No significant differences were found for the size of lower incisors among different groups and divisions (P > 0.05). Compared with group 1, the crown-root angulations of lower incisors in groups 2 and 3 were significantly larger (P lower incisors of division 3 rather than divisions 2 and 3 exhibited larger crown-root angulations (P lower incisors in class III patients during orthodontic and orthognathic treatment, especially in severe ones.

  14. Effect of the shades of background substructures on the overall color of zirconia-based all-ceramic crowns

    Science.gov (United States)

    Tulapornchai, Chantana; Mamani, Jatuphol; Kamchatphai, Wannaporn; Thongpun, Noparat

    2013-01-01

    PURPOSE The objective of this study was to determine the effect of the color of a background substructure on the overall color of a zirconia-based all-ceramic crown. MATERIALS AND METHODS Twenty one posterior zirconia crowns were made for twenty subjects. Seven premolar crowns and six molar crowns were cemented onto abutments with metal post and core in the first and second group. In the third group, eight molar crowns were cemented onto abutments with a prefabricated post and composite core build-up. The color measurements of all-ceramic crowns were made before try-in, before and after cementation. A repeated measure ANOVA was used for a statistical analysis of a color change of all-ceramic crowns at α=.05. Twenty four zirconia specimens, with different core thicknesses (0.4-1 mm) were also prepared to obtain the contrast ratio of zirconia materials after veneering. RESULTS L*, a*, and b* values of all-ceramic crowns cemented either on a metal cast post and core or on a prefabricated post did not show significant changes (P>.05). However, the slight color changes of zirconia crowns were detected and represented by ΔE*ab values, ranging from 1.2 to 3.1. The contrast ratios of zirconia specimens were 0.92-0.95 after veneering. CONCLUSION No significant differences were observed between the L*, a*, and b* values of zirconia crowns cemented either on a metal cast post and core or a prefabricated post and composite core. However, the color of a background substructure could affect the overall color of posterior zirconia restorations with clinically recommended core thickness according to ΔE*ab values. PMID:24049574

  15. Comparison of Amount of Primary Tooth Reduction Required for Anterior and Posterior Zirconia and Stainless Steel Crowns.

    Science.gov (United States)

    Clark, Larkin; Wells, Martha H; Harris, Edward F; Lou, Jennifer

    2016-01-01

    To determine if aggressiveness of primary tooth preparation varied among different brands of zirconia and stainless steel (SSC) crowns. One hundred primary typodont teeth were divided into five groups (10 posterior and 10 anterior) and assigned to: Cheng Crowns (CC); EZ Pedo (EZP); Kinder Krowns (KKZ); NuSmile (NSZ); and SSC. Teeth were prepared, and assigned crowns were fitted. Teeth were weighed prior to and after preparation. Weight changes served as a surrogate measure of tooth reduction. Analysis of variance showed a significant difference in tooth reduction among brand/type for both the anterior and posterior. Tukey's honest significant difference test (HSD), when applied to anterior data, revealed that SSCs required significantly less tooth removal compared to the composite of the four zirconia brands, which showed no significant difference among them. Tukey's HSD test, applied to posterior data, revealed that CC required significantly greater removal of crown structure, while EZP, KKZ, and NSZ were statistically equivalent, and SSCs required significantly less removal. Zirconia crowns required more tooth reduction than stainless steel crowns for primary anterior and posterior teeth. Tooth reduction for anterior zirconia crowns was equivalent among brands. For posterior teeth, reduction for three brands (EZ Pedo, Kinder Krowns, NuSmile) did not differ, while Cheng Crowns required more reduction.

  16. Greyish shadow on the labial gingival margin after insertion porcelain fused to metal crown on anterior teeth

    Directory of Open Access Journals (Sweden)

    Ike Damayanti Habar

    2016-06-01

    Full Text Available The crown is the type of restoration that replaces lost tooth structure caused by caries, trauma, or other causes which aims to restore comfort, function and patient confidence. Porcelain fused to metal restorationis an option that dominate the aesthetic restoration crown sand fixed prosthesisover the last 50 years. Porcelain fused to metal crown, consists of porcelain layer bonded to a thin cast metal coping that fits over the tooth preparation. Such a restoration combines the strength  and accurate fit of a cast metal crown with  the cosmetic effect of a porcelain crown. In some cases, it looks greyish shadow on the labial gingival margin after insertion porcelain fused to metal crowns on anterior teeth that can not be hidden even if the placement of the edge in subgingival. The purpose of this case report is to determine the cause of a greyish shadow on the labial gingival margin after insertion porcelain fused to metal crowns on anterior teeth and how to prevent a greyish shadow very disturbing aesthetics of the patient.

  17. Distribution of Lepidopteran Larvae on Norway Spruce: Effects of Slope and Crown Aspect.

    Science.gov (United States)

    Kulfan, Ján; Dvořáčková, Katarína; Zach, Peter; Parák, Michal; Svitok, Marek

    2016-04-01

    Lepidoptera associated with Norway spruce, Picea abies (L.) Karsten, play important roles in ecosystem processes, acting as plant pests, prey for predators, and hosts for parasites and parasitoids. Their distribution patterns in spruce crowns and forests are only poorly understood. We examined how slope and crown aspect affect the occurrence and abundance of moth larvae on solitary spruce trees in a montane region in Central Europe. Moth larvae were collected from southern and northern crowns of trees growing on south- and north-facing slopes (four treatments) using emergence boxes at the end of winter and by the beating method during the growing season. Species responses to slope and crown aspect were not uniform. Treatment effects on moth larvae were stronger in the winter than during the growing season. In winter, the abundance of bud-boring larvae was significantly higher in northern than in southern crowns regardless of the slope aspect, while both slope and aspect had marginally significant effects on abundance of miners. During the growing season, the occurrence of free-living larvae was similar among treatments. Emergence boxes and beating spruce branches are complementary techniques providing valuable insights into the assemblage structure of moth larvae on Norway spruce. Due to the uneven distribution of larvae detected in this study, we recommend adoption of a protocol that explicitly includes sampling of trees from contrasting slopes and branches from contrasting crown aspect in all seasons. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Marginal Fit of Lithium Disilicate Crowns Fabricated Using Conventional and Digital Methodology: A Three-Dimensional Analysis.

    Science.gov (United States)

    Mostafa, Nezrine Z; Ruse, N Dorin; Ford, Nancy L; Carvalho, Ricardo M; Wyatt, Chris C L

    2018-02-01

    To compare the marginal fit of lithium disilicate (LD) crowns fabricated with digital impression and manufacturing (DD), digital impression and traditional pressed manufacturing (DP), and traditional impression and manufacturing (TP). Tooth #15 was prepared for all-ceramic crowns on an ivorine typodont. There were 45 LD crowns fabricated using three techniques: DD, DP, and TP. Microcomputed tomography (micro-CT) was used to assess the 2D and 3D marginal fit of crowns in all three groups. The 2D vertical marginal gap (MG) measurements were done at 20 systematically selected points/crown, while the 3D measurements represented the 3D volume of the gap measured circumferentially at the crown margin. Frequencies of different marginal discrepancies were also recorded, including overextension (OE), underextension (UE), and marginal chipping. Crowns with vertical MG > 120 μm at more than five points were considered unacceptable and were rejected. The results were analyzed by one-way ANOVA with Scheffe post hoc test (α = 0.05). DD crowns demonstrated significantly smaller mean vertical MG (33.3 ± 19.99 μm) compared to DP (54.08 ± 32.34 μm) and TP (51.88 ± 35.34 μm) crowns. Similarly, MG volume was significantly lower in the DD group (3.32 ± 0.58 mm 3 ) compared to TP group (4.16 ± 0.59 mm 3 ). The mean MG volume for the DP group (3.55 ± 0.78 mm 3 ) was not significantly different from the other groups. The occurrence of underextension error was higher in DP (6.25%) and TP (5.4%) than in DD (0.33%) group, while overextension was more frequent in DD (37.67%) than in TP (28.85%) and DP (18.75%) groups. Overall, 4 out of 45 crowns fabricated were deemed unacceptable based on the vertical MG measurements (three in TP group and one in DP group; all crowns in DD group were deemed acceptable). The results suggested that digital impression and CAD/CAM technology is a suitable, better alternative to traditional impression and manufacturing. © 2017 by the American College

  19. Study on toxicity mutation of crown-vetch induced by radiation

    International Nuclear Information System (INIS)

    Yi Huying; Yu Hongbin; Ma Jianzong

    1992-01-01

    The suckers of Germany crown-vetch were irradiated by 60 Co gamma ray and fast neutron. The toxicity mutation frequency and genetic stability of crown-vetch were studied. The various toxicity mutants were found in M 1 . Most of the toxicity mutants was unstable in M 2 , Stable mutant was very few (about 2.0-12.9%). β-nitropropionic acid in the low toxicity mutants selected was 31.7-39.8 mg/g. Genetic characteristics of low toxicity mutants were stable in M 3 -M 5

  20. Paraphoma crown rot of pyrethrum (Tanacetum cinerariifolium)

    NARCIS (Netherlands)

    Moslemi, Azin; Ades, Peter Kevin; Groom, Tim; Crous, Pedro; Nicolas, Marc Edward; Taylor, Paul William James

    2016-01-01

    Pyrethrum (Tanacetum cinerariifolium) is commercially cultivated for the extraction of natural pyrethrin insecticides from the oil glands inside seeds. Yield-decline has caused significant yield losses in Tasmania during the last decade. A new pathogen of pyrethrum causing crown rot and reduced

  1. Crown releasing of red maple poles to shorten high-quality sawlog rotations

    Science.gov (United States)

    Gayne G. Erdmann; Ralph M., Jr. Peterson; Robert R. Orberg

    1985-01-01

    The effects of six crown-release treatments on growth and bole quality development of 54-year-old dominant, codominant, and intermediate red maples (Acer rubrum L.) were evaluated on a good red maple site (site index = 19.3 mat 50 years) in upper Michigan. Results showed that crown release stimulated the growth of dominants, codominants, and strong...

  2. Night Terrors (For Parents)

    Science.gov (United States)

    ... you tried. A night terror is a sleep disruption that seems similar to a nightmare , but is ... to: reduce your child's stress create a bedtime routine that's simple and relaxing make sure your child ...

  3. Patient Handoffs: Is Cross Cover or Night Shift Better?

    Science.gov (United States)

    Higgins, Alanna; Brannen, Melissa L; Heiman, Heather L; Adler, Mark D

    2017-06-01

    Studies show singular handoffs between health care providers to be risky. Few describe sequential handoffs or compare handoffs from different provider types. We investigated the transfer of information across 2 handoffs using a piloted survey instrument. We compared cross-cover (every fourth night call) with dedicated night-shift residents. Surveys assessing provider knowledge of hospitalized patients were administered to pediatric residents. Primary teams were surveyed about their handoff upon completion of daytime coverage of a patient. Night-shift or cross-covering residents were surveyed about their handoff of the same patient upon completion of overnight coverage. Pediatric hospitalists rated the consistency of information between the surveys. Absolute difference was calculated between the 2 providers' rating of a patient's (a) complexity and (b) illness severity. Scores were compared across provider type. Fifty-nine complete handoff pairs were obtained. Fourteen and 45 handoff surveys were completed by a cross-covering and a night-shift provider, respectively. There was no significant difference in information consistency between primary and night-shift (median, 4.0; interquartile range [IQR], 3-4) versus primary and cross-covering providers (median, 4.0; IQR, 3-4). There was no significant difference in median patient complexity ratings (night shift, 3.0; IQR, 1-5, versus cross cover, 3.5; IQR, 1-5) or illness severity ratings (night shift, 2.0; IQR, 1-4, versus cross-cover, 3.0; IQR, 1-6) when comparing provider types giving a handoff. We did not find a difference in physicians' transfer of information during 2 handoffs among providers taking traditional call or on night shift. Development of tools to measure handoff consistency is needed.

  4. Night shift fatigue among anaesthesia trainees at a major metropolitan teaching hospital.

    Science.gov (United States)

    Lancman, B M

    2016-05-01

    Night shifts expose anaesthesia trainees to the risk of fatigue and, potentially, fatigue-related performance impairment. This study examined the workload, fatigue and coping strategies of anaesthesia trainees during night shifts. A blinded survey-based study was undertaken at a major single centre metropolitan teaching hospital in Australia. All ten anaesthesia trainees who worked night shifts participated. The survey collected data on duration of night shifts, workload, and sleep patterns. Fatigue was assessed using the Karolinska Sleepiness Scale (KSS). There were 93 night shifts generating data out of a potential 165. Trainees tended to sleep an increasing amount before their shift as the nights progressed from 1 to 5. Night 1 was identified as an 'at risk' night due to the amount of time spent awake before arriving at work (32% awake for U+003E8 hours); on all other nights trainees were most likely to have slept 6-8 hours. The KSS demonstrated an increase in sleepiness of 3 to 4 points on the scale from commencement to conclusion of a night shift. The Night 1 conclusion sleepiness was markedly worse than any other night with 42% falling into an 'at-risk' category. The findings demonstrate fatigue and inadequate sleep in anaesthesia trainees during night shifts in a major metropolitan teaching hospital. The data obtained may help administrators prepare safer rosters, and junior staff develop improved strategies to reduce the likelihood of fatigue.

  5. Laser all-ceramic crown removal and pulpal temperature--a laboratory proof-of-principle study.

    Science.gov (United States)

    Rechmann, P; Buu, N C H; Rechmann, B M T; Finzen, F C

    2015-11-01

    The objective of this proof-of-principle laboratory pilot study was to evaluate the temperature increase in the pulp chamber in a worst case scenario during Er:YAG laser debonding of all-ceramic crowns. Twenty extracted molars were prepared to receive all-ceramic IPS E.max CAD full contour crowns. The crowns were bonded to the teeth with Ivoclar Multilink Automix. Times for laser debonding and temperature rise in the pulp chamber using micro-thermocouples were measured. The Er:YAG was used with 560 mJ/pulse. The irradiation was applied at a distance of 5 mm from the crown surface. Additional air-water spray for cooling was utilized. Each all-ceramic crown was successfully laser debonded with an average debonding time of 135 ± 35 s. No crown fractured, and no damage to the underlying dentin was detected. The bonding cement deteriorated, but no carbonization at the dentin/cement interface occurred. The temperature rise in the pulp chamber averaged 5.4° ± 2.2 °C. During 8 out of the 20 crown removals, the temperature rise exceeded 5.5 °C, lasting 5 to 43 s (average 18.8 ± 11.6 s). A temperature rise of 11.5 °C occurred only once, while seven times the temperature rise was limited to 6.8 ± 0.5 °C. Temperature rises above 5.5 °C occurred only when the laser was applied from one side and additional cooling from the side opposite the irradiation. Er:YAG laser energy can successfully be used to efficiently debond all-ceramic crowns from natural teeth. Temperature rises exceeding 5.5 °C only occur when an additional air/water cooling from a dental syringe is inaccurately directed. To avoid possible thermal damage and to allow further heat diffusion, clinically temperature-reduced water might be applied.

  6. Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

    Science.gov (United States)

    Yang, Xin; Lv, Pin; Liu, Yihong; Si, Wenjie; Feng, Hailan

    2015-01-01

    In this study, the accuracy (precision and trueness) of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1) To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D) comparison. Root mean square (RMS) and color-coded difference images were offered. (2) To assess trueness, micro computed tomography (micro-CT) was used to get the reference model (REF). Deviations between REF and repeated scan models (from (1)) were calculated. (3) To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing. PMID:28793417

  7. Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

    Directory of Open Access Journals (Sweden)

    Xin Yang

    2015-06-01

    Full Text Available In this study, the accuracy (precision and trueness of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1 To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D comparison. Root mean square (RMS and color-coded difference images were offered. (2 To assess trueness, micro computed tomography (micro-CT was used to get the reference model (REF. Deviations between REF and repeated scan models (from (1 were calculated. (3 To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing.

  8. Black to Black

    DEFF Research Database (Denmark)

    Langkjær, Michael Alexander

    2012-01-01

    Pop musicians performing in black stage costume take advantage of cultural traditions relating to matters black. Stylistically, black is a paradoxical color: although a symbol of melancholy, pessimism, and renunciation, black also expresses minimalist modernity and signifies exclusivity (as is hi...

  9. Artificial light at night alters trophic interactions of intertidal invertebrates.

    Science.gov (United States)

    Underwood, Charlotte N; Davies, Thomas W; Queirós, Ana M

    2017-07-01

    Despite being globally widespread in coastal regions, the impacts of light pollution on intertidal ecosystems has received little attention. Intertidal species exhibit many night-time-dependent ecological strategies, including feeding, reproduction, orientation and predator avoidance, which are likely negatively affected by shifting light regimes, as has been observed in terrestrial and aquatic taxa. Coastal lighting may shape intertidal communities through its influence on the nocturnal foraging activity of dogwhelks (Nucella lapillus), a widespread predatory mollusc that structures biodiversity in temperate rocky shores. In the laboratory, we investigated whether the basal and foraging activity of this predator was affected by exposure to night-time lighting both in the presence and absence of olfactory predator cues (Carcinus maenas, common shore crab). Assessments of dogwhelks' behavioural responses to night-time white LED lighting were performed on individuals that had been acclimated to night-time white LED lighting conditions for 16 days and individuals that had not previously been exposed to artificial light at night. Dogwhelks acclimated to night-time lighting exhibited natural refuge-seeking behaviour less often compared to control animals, but were more likely to respond to and handle prey irrespective of whether olfactory predator cues were present. These responses suggest night-time lighting likely increased the energetic demand of dogwhelks through stress, encouraging foraging whenever food was available, regardless of potential danger. Contrastingly, whelks not acclimated under night-time lighting were more likely to respond to the presence of prey under artificial light at night when olfactory predator cues were present, indicating an opportunistic shift towards the use of visual instead of olfactory cues in risk evaluation. These results demonstrate that artificial night-time lighting influences the behaviour of intertidal fauna such that the

  10. Night shift work and prolactin as a breast cancer risk factor

    Directory of Open Access Journals (Sweden)

    Agnieszka Bukowska

    2013-04-01

    Full Text Available Prolactin - a hormone secreted in a circadian rhythm acts as a regulator of growth and development of the mammary glands. It has been observed that working at night increases breast cancer risk in women. Night shift work, probably carcinogenic to humans (Group 2A IARC, can disrupt a circadian rhythm, and thus potentially alter the rhythm of prolactin secretion. The aim of our work was to review epidemiological evidence on the association between prolactin and the risk of breast cancer and the influence of work at night on prolactin secretion. Search was done in the Medline database by keywords (shift work, work at night, risk of breast cancer and prolactin. The increased proliferation of breast cells activated by prolactin can promote the development of cancer. The results of the largest epidemiological prospective studies suggest the association between prolactin levels and the risk of breast cancer in women. So far, only seven studies have investigated the association between work at night and prolactin secretion. In three studies lower concentrations of prolactin have been observed in night shift workers. No relationship between the night shift work duration and prolactin level in women have been reported. Night shift work can modify the profile of prolactin secretion in night workers, probably decreasing the secretion of this hormone at night. It is therefore unlikely that prolactin plays an important role in the development of breast cancer in women working at night. This conclusion is based on the results of a few epidemiological studies. Med Pr 2013;64(2:245–257

  11. Sign of the day-night asymmetry for solar neutrinos

    International Nuclear Information System (INIS)

    Chiang, Cheng-Wei; Wolfenstein, Lincoln

    2001-01-01

    A qualitative understanding of the day-night asymmetry for solar neutrinos is provided. The greater night flux in ν e is seen to be a consequence of the fact that the matter effect in the Sun and that in the Earth have the same sign. It is shown in the adiabatic approximation for the Sun and constant density for the Earth that, for all values of the mixing angle θ V between 0 and π/2, the night flux of neutrinos is greater than the day flux. Only for small values of θ V where the adiabatic approximation badly fails does the sign of the day-night asymmetry reverse

  12. Passive Cooling of buildings by night-time ventilation

    DEFF Research Database (Denmark)

    Artmann, Nikolai; Manz, Heinrich; Heiselberg, Per

    coefficients below about 4 W/m2K. Heat transfer during night-time ventilation in case of mixing and displacement ventilation was investigated in a full scale test room at Aalborg University. In the experiments the temperature efficiency of the ventilation was determined. Based on the previous re-sults a method...... are still hesitant to apply passive cooling techniques. As night-time ventilation is highly dependent on climatic conditions, a method for quantifying the climatic cooling potential was developed and the impact of climate warming was investigated. Although a clear decrease was found, significant potential...... will remain, especially if night-time ventilation is applied in combination with other cooling methods. Building energy simulations showed that the performance of night-time ventilation is also affected by the heat transfer at internal room surfaces, as the cooling effect is very limited for heat transfer...

  13. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling.

    Science.gov (United States)

    Syrek, Andreas; Reich, Gunnar; Ranftl, Dieter; Klein, Christoph; Cerny, Barbara; Brodesser, Jutta

    2010-07-01

    The aim of the present study was to compare the fit of all-ceramic crowns fabricated from intraoral digital impressions with the fit of all-ceramic crowns fabricated from silicone impressions. Twenty patients agreed to take part in the study to receive two Lava crowns each for the same preparation. One crown was fabricated from intraoral scans using the Lava Chairside Oral Scanner (Lava C.O.S.), and the other crown from a two-step silicone impression. Prior to cementation the fit of both crowns was clinically evaluated by two calibrated and blinded examiners; the marginal fit was also scored from replicas. Data from the replica scores were analysed by Anderson-Darling test, Levene's test and Mann-Whitney test. All tests were performed with alpha-level of 0.05. Median marginal gap in the conventional impression group was 71microm (Q1:45microm; Q3:98microm), and in the digital impression group 49microm (Q1:32microm; Q3:65microm). Mann-Whitney test revealed a significant difference between the groups (pdigitally fabricated crowns. 1. Crowns from intraoral scans revealed significantly better marginal fit than crowns from silicone impressions. 2. Marginal discrepancies in both groups were within the limits of clinical acceptability. 3. Crowns from intraoral scans tended to show better interproximal contact area quality. 4. Crowns from both groups performed equally well with regard to occlusion. Copyright 2010 Elsevier Ltd. All rights reserved.

  14. Comparative analysis of intraoral radiographs with variation of tube angulation to detect insufficient crown margins.

    Science.gov (United States)

    Sailer, Benjamin F; Geibel, Margrit-Ann

    2013-01-01

    Variations in angulation of the x-ray tube affect the appearance of insufficient approximal crown margins on intraoral radiographs. This study examines the impact of such angular variation on the assessment of digital radiographs using three different X-ray tubes--Heliodent DS (Sirona), Gendex Expert DC (KaVo Dental) and Focus (KaVo Dental)--as well as the Gendex Visualix eHD CCD sensor (KaVo Dental). The test specimens, crowned teeth 46 from two mandibles provided by the Institute of Anatomy and Cell Biology, were examined with each tube. The results indicate great differences in the angles indicative of insufficient crown margins on X-ray images. Because of beam divergence and the crown marginal gap, the length and width of which frequently varies, it is difficult to infer any optimum angle from the data. This leads to the conclusion that at present, it is not possible to establish ideal angles for visualization of insufficient approximal crown margins.

  15. Digital evaluation of absolute marginal discrepancy: A comparison of ceramic crowns fabricated with conventional and digital techniques.

    Science.gov (United States)

    Liang, Shanshan; Yuan, Fusong; Luo, Xu; Yu, Zhuoren; Tang, Zhihui

    2018-04-05

    Marginal discrepancy is key to evaluating the accuracy of fixed dental prostheses. An improved method of evaluating marginal discrepancy is needed. The purpose of this in vitro study was to evaluate the absolute marginal discrepancy of ceramic crowns fabricated using conventional and digital methods with a digital method for the quantitative evaluation of absolute marginal discrepancy. The novel method was based on 3-dimensional scanning, iterative closest point registration techniques, and reverse engineering theory. Six standard tooth preparations for the right maxillary central incisor, right maxillary second premolar, right maxillary second molar, left mandibular lateral incisor, left mandibular first premolar, and left mandibular first molar were selected. Ten conventional ceramic crowns and 10 CEREC crowns were fabricated for each tooth preparation. A dental cast scanner was used to obtain 3-dimensional data of the preparations and ceramic crowns, and the data were compared with the "virtual seating" iterative closest point technique. Reverse engineering software used edge sharpening and other functional modules to extract the margins of the preparations and crowns. Finally, quantitative evaluation of the absolute marginal discrepancy of the ceramic crowns was obtained from the 2-dimensional cross-sectional straight-line distance between points on the margin of the ceramic crowns and the standard preparations based on the circumferential function module along the long axis. The absolute marginal discrepancy of the ceramic crowns fabricated using conventional methods was 115 ±15.2 μm, and 110 ±14.3 μm for those fabricated using the digital technique was. ANOVA showed no statistical difference between the 2 methods or among ceramic crowns for different teeth (P>.05). The digital quantitative evaluation method for the absolute marginal discrepancy of ceramic crowns was established. The evaluations determined that the absolute marginal discrepancies were

  16. Relationship of night and shift work with weight change and lifestyle behaviors.

    OpenAIRE

    Bekkers, M.B.M; Koppes, L.L.J.; Rodenburg, W.; Steeg, H. van; Proper, K.I.

    2015-01-01

    Objective: To prospectively study the association of night and shift work with weight change and lifestyle behaviors. Methods: Workers participating in the Netherlands Working Conditions Cohort Study (2008 and 2009) (N = 5951) reported night and shift work, weight and height. Groups included stable night or shift work, from day work to night or shift work, from night or shift work to day work, and no night or shift work in 2008 and 2009. Regression analyses were used to study association chan...

  17. Management of crown-of-thorns sea star (

    NARCIS (Netherlands)

    Bos, A.R.; Gumanao, G.S.; Mueller, B.; Saceda-Cardoza, M.M.E.

    2013-01-01

    Removals of crown-of-thorns sea stars (Acanthaster planci L) are crucial initiatives in limiting the damage to coral reefs during outbreaks, but have often been unable to control the populations. We hypothesized that reef topography and exact timing of removals (before reproduction) determine their

  18. Needle-Age Related Variability in Nitrogen, Mobile Carbohydrates, and δ13C within Pinus koraiensis Tree Crowns

    Science.gov (United States)

    Yan, Cai-Feng; Han, Shi-Jie; Zhou, Yu-Mei; Wang, Cun-Guo; Dai, Guan-Hua; Xiao, Wen-Fa; Li, Mai-He

    2012-01-01

    For both ecologists and physiologists, foliar physioecology as a function of spatially and temporally variable environmental factors such as sunlight exposure within a tree crown is important for understanding whole tree physiology and for predicting ecosystem carbon balance and productivity. Hence, we studied concentrations of nitrogen (N), non-structural carbohydrates (NSC = soluble sugars + starch), and δ13C in different-aged needles within Pinus koraiensis tree crowns, to understand the needle age- and crown position-related physiology, in order to test the hypothesis that concentrations of N, NSC, and δ13C are needle-age and crown position dependent (more light, more photosynthesis affecting N, NSC, and δ13C), and to develop an accurate sampling strategy. The present study indicated that the 1-yr-old needles had significantly higher concentration levels of mobile carbohydrates (both on a mass and an area basis) and Narea (on an area basis), as well as NSC-N ratios, but significantly lower levels of Nmass (on a mass basis) concentration and specific leaf area (SLA), compared to the current-year needles. Azimuthal (south-facing vs. north-facing crown side) effects were found to be significant on starch [both on a mass (STmass) and an area basis (STarea)], δ13C values, and Narea, with higher levels in needles on the S-facing crown side than the N-facing crown side. Needle Nmass concentrations significantly decreased but needle STmass, STarea, and δ13C values significantly increased with increasing vertical crown levels. Our results suggest that the sun-exposed crown position related to photosynthetic activity and water availability affects starch accumulation and carbon isotope discrimination. Needle age associated with physiological activity plays an important role in determining carbon and nitrogen physiology. The present study indicates that across-scale sampling needs to carefully select tissue samples with equal age from a comparable crown position

  19. Night eating and weight change in middle-aged men and women

    DEFF Research Database (Denmark)

    Andersen, Gregers Stig; Stunkard, Albert J.; Sørensen, Thorkild I.A.

    2004-01-01

    -94 too. Subjects working night shifts were excluded. MEASUREMENTS: Night eating in 1987-88, 5-y preceding and 6-y subsequent weight change. RESULTS: In total, 9.0% women and 7.4% men reported 'getting up at night to eat'. Obese women with night eating experienced an average 6-y weight gain of 5.2 kg (P=0...

  20. Selective crystallization of cations with crown ethers; Selektive Kristallisation von Kationen mit Kronenethern

    Energy Technology Data Exchange (ETDEWEB)

    Heffels, Dennis Egidius

    2014-07-04

    The aim of this work was to study the selectivity and preferences of the incorporation of differently sized cations in the cavities of various crown ethers and the characterization of the resulting compounds. The coordination preferences of crown ethers with different cavities have long been known, and the impact of other effects on the structure formation have increasingly become the focus of attention. In this work a comparative overview of the coordination preferences depending on various factors was undertaken. The focus was mainly on the variation of the cavity of the crown ether in the presence of differently sized cations. In addition, the effects of the solvent and differently coordinating anions have been investigated. Within the framework of this work, basic coordination preferences could be detected with rare earth nitrates, which are affected particularly by the choice of the solvent. The formation of different types of structures could be controlled by varying the conditions such that the incorporation of the cation in the cavity of the crown ether was influenced and the formation of a particular type of structure can be influenced partly by the choice of solvent. In this case no direct preferences for the incorporation into the cavity of the crown ether in relation to the cation size were observed for rare earth cations. However, the coordination of the crown ether leads in each case - for lanthanides - to rather high coordination numbers. A total of five new rare earth complexes and two structural variants could be observed with crown ethers. In the study of the selectivity of the incorporation into the cavity, known structures were also reproduced and further structures were characterized but the crystal structures not entirely solved. With the use of monovalent cations such as potassium, lithium or silver a total of nine new compounds could be synthesized, while no clear preferences for the incorporation of certain cations were detected. The

  1. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns.

    Science.gov (United States)

    Sulaiman, F; Chai, J; Jameson, L M; Wozniak, W T

    1997-01-01

    The in vitro marginal fit of three all-ceramic crown systems (In-Ceram, Procera, and IPS Empress) was compared. All crown systems were significantly different from each other at P = 0.05. In-Ceram exhibited the greatest marginal discrepancy (161 microns), followed by Procera (83 microns), and IPS Empress (63 microns). There were no significant differences among the various stages of the crown fabrication: core fabrication, porcelain veneering, and glazing. The facial and lingual margins exhibited significantly larger marginal discrepancies than the mesial and distal margins.

  2. Night Shift Work and Its Health Effects on Nurses.

    Science.gov (United States)

    Books, Candie; Coody, Leon C; Kauffman, Ryan; Abraham, Sam

    The purpose of this research was to study night shift work and its health effects on nurses. This was a quantitative study using descriptive design; it also incorporated three qualitative open-ended questions to complement the study. The data were collected using Survey Monkey, with an Internet-based confidential data collection tool. The population of relevance to this study was nurses employed in hospital settings in the United States. E-mail addresses and Facebook were used to recruit participants. Results indicated that there is an increased risk of sleep deprivation, family stressors, and mood changes because of working the night shift. Rotating shifts were mentioned as a major concern for night shift nurses. Respondents agreed that complaints about fatigue and fatigue-related illnesses in night shift workers were ignored. There was also a general perception among nurses working the night shift that sleep deprivation leads to negative health consequences including obesity; however, they were not as high a concern as rotating shifts or fatigue.

  3. A benchmark study for the crown-type splashing dynamics of one- and two-component droplet wall-film interactions

    Science.gov (United States)

    Geppert, A.; Terzis, A.; Lamanna, G.; Marengo, M.; Weigand, B.

    2017-12-01

    The present paper investigates experimentally the impact dynamics of crown-type splashing for miscible two- and one-component droplet wall-film interactions over a range of Weber numbers and dimensionless film thicknesses. The splashing outcome is parametrised in terms of a set of quantifiable parameters, such as crown height, top and base diameter, wall inclination, number of fingers, and secondary droplet properties. The results show that the outcome of a splashing event is not affected by the choice of similar or dissimilar fluids, provided the dimensionless film thickness is larger than 0.1. Below this threshold, distinctive features of two-component interactions appear, such as hole formation and crown bottom breakdown. The observation of different crown shapes (e.g. V-shaped, cylindrical, and truncated-cone) confirms that vorticity production induces changes in the crown wall inclination, thus affecting the evolution of the crown height and top diameter. The evolution of the crown base diameter, instead, is mainly dependent on the relative importance of liquid inertia and viscous losses in the wall-film. The maximum number of liquid fingers decreases with increasing wall, film thickness, due to the enhanced attenuation of the effect of surface properties on the fingering process. The formation of secondary droplets is also affected by changes in the crown wall inclination. In particular, for truncated-cone shapes the occurrence of crown rim contraction induces a large scatter in the secondary droplet properties. Consequently, empirical models for the maximum number and mean diameter of the secondary droplets are derived for V-shaped crowns, as observed for the hexadecane-Hyspin interactions.

  4. Aesthetic treatment on anterior teeth crown fracture caused by dental trauma

    Directory of Open Access Journals (Sweden)

    Nanik Zubaidah

    2012-12-01

    Full Text Available Background: Complicated crown fracture is a tooth fracture that involve enamel, dentine and pulp. The incidence of complicated crown fracture ranges from 2% to 13% of all dental injuries and the most commonly involved teeth are the maxillary central incisors. Various treatment modalities are available depending on the clinical, physiological and radiographic examination of the involved teeth. Purpose: The aim of this case report is to present the management of crown fractures with pulpal exposure caused by traumatic injury, through endorestoration approach to reconstruct the shape and function of the teeth. Case: A 17 years old male with complicated crown fractures of anterior teeth #11 #21 and #22. The patient wish for aesthetic dental treatment in both of its form and function. Case management: Crown fractures of anterior teeth with exposed pulp caused by traumatic injury were reconstructed by endorestoration approach. The endodontic treatment with post and core insertion in the root canal which will increase its retention and porcelain fused to metal crown which will aesthetically recover its original form and function. After restoration the patient feel very glad and confident with the result. Conclusion: Endorestoration treatment on anterior teeth with complicated crown fractures and exposed pulp is able to recover the normal form, function and dental aesthetic in accordance with stomatognatic system and self confidence.Latar belakang: Fraktur mahkota kompleks (complicated adalah fraktur pada mahkota gigi yang melibatkan enamel, dentin dan pulpa. Kejadian dari fraktur mahkota kompleks bervariasi antara 2-13% dari semua trauma gigi dan sebagian besar gigi yang terkena adalah gigi insisif pertama rahang atas. Berbagai macam cara perawatan yang dilakukan tergantung pada hasil pemeriksaan klinis, psikologis dan radiografis dari gigi yang terkena. Tujuan: Laporan kasus ini menjelaskan penatalaksanaan fraktur mahkota gigi dengan pulpa terbuka

  5. Effect of crown-to-implant ratio on peri-implant stress: a finite element analysis.

    Science.gov (United States)

    Verri, Fellippo Ramos; Batista, Victor Eduardo de Souza; Santiago, Joel Ferreira; Almeida, Daniel Augusto de Faria; Pellizzer, Eduardo Piza

    2014-12-01

    The aim of this study was to evaluate stress distribution in the fixation screws and bone tissue around implants in single-implant supported prostheses with crowns of different heights (10, 12.5, 15 mm - crown-to-implant ratio 1:1, 1.25:1, 1.5:1, respectively). It was designed using three 3-D models. Each model was developed with a mandibular segment of bone block including an internal hexagon implant supporting a screw-retained, single metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm with crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. The applied forces were 200N (axial) and 100 N (oblique). The increase of crown height showed differences with the oblique load in some situations. By von Mises' criterion, a high stress area was concentrated at the implant/fixation screw and abutment/implant interfaces at crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. Using the maximum principal criteria, the buccal regions showed higher traction stress intensity, whereas the distal regions showed the largest compressive stress in all models. The increase of C/I ratio must be carefully evaluated by the dentist since the increase of this C/I ratio is proportional to the increase of average stress for both screw fixation (C/I 1:1 to 1:1.25 ratio=30.1% and C/I 1:1 to 1:1.5 ratio=46.3%) and bone tissue (C/I 1:1 to 1:1.25 ratio=30% and C/I 1:1 to 1:1.5 ratio=51.5%). Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Relationship of night and shift work with weight change and lifestyle behaviors.

    Science.gov (United States)

    Bekkers, Marga B M; Koppes, Lando L J; Rodenburg, Wendy; van Steeg, Harry; Proper, Karin I

    2015-04-01

    To prospectively study the association of night and shift work with weight change and lifestyle behaviors. Workers participating in the Netherlands Working Conditions Cohort Study (2008 and 2009) (N = 5951) reported night and shift work, weight and height. Groups included stable night or shift work, from day work to night or shift work, from night or shift work to day work, and no night or shift work in 2008 and 2009. Regression analyses were used to study association changes in night and shift work with weight change and changes in lifestyle behaviors. A larger weight change was seen in normal-weight workers changing from day to shift work (β = 0.93%; 95% confidence interval, 0.01 to 1.85) compared with stable no shift workers. No further associations of night and shift work with weight change were observed, neither in normal-weight, overweight, and obese workers. Despite the fact that starting night or shift work is associated with some unhealthy lifestyle habits, this study did not confirm a positive association of night and shift work with weight change over 1 year, except for normal-weight workers moving from day to shift work.

  7. Nonelective surgery at night and in-hospital mortality

    DEFF Research Database (Denmark)

    van Zaane, Bas; van Klei, Wilton A; Buhre, Wolfgang F

    2015-01-01

    BACKGROUND: Evidence suggests that sleep deprivation associated with night-time working may adversely affect performance resulting in a reduction in the safety of surgery and anaesthesia. OBJECTIVE: Our primary objective was to evaluate an association between nonelective night-time surgery and in...

  8. Increased and mistimed sex hormone production in night shift workers.

    Science.gov (United States)

    Papantoniou, Kyriaki; Pozo, Oscar J; Espinosa, Ana; Marcos, Josep; Castaño-Vinyals, Gemma; Basagaña, Xavier; Juanola Pagès, Elena; Mirabent, Joan; Martín, Jordi; Such Faro, Patricia; Gascó Aparici, Amparo; Middleton, Benita; Skene, Debra J; Kogevinas, Manolis

    2015-05-01

    Night shift work has been associated with an increased risk for breast and prostate cancer. The effect of circadian disruption on sex steroid production is a possible underlying mechanism, underinvestigated in humans. We have assessed daily rhythms of sex hormones and melatonin in night and day shift workers of both sexes. We recruited 75 night and 42 day workers, ages 22 to 64 years, in different working settings. Participants collected urine samples from all voids over 24 hours on a working day. Urinary concentrations of 16 sex steroid hormones and metabolites (estrogens, progestagens, and androgens) and 6-sulfatoxymelatonin were measured in all samples. Mean levels and peak time of total and individual metabolite production were compared between night and day workers. Night workers had higher levels of total progestagens [geometric mean ratio (GMR) 1.65; 95% confidence intervals (CI), 1.17-2.32] and androgens (GMR: 1.44; 95% CI, 1.03-2.00), compared with day workers, after adjusting for potential confounders. The increased sex hormone levels among night shift workers were not related to the observed suppression of 6-sulfatoxymelatonin. Peak time of androgens was significantly later among night workers, compared with day workers (testosterone: 12:14 hours; 10:06-14:48 vs. 08:35 hours; 06:52-10:46). We found increased levels of progestagens and androgens as well as delayed peak androgen production in night shift workers compared with day workers. The increase and mistiming of sex hormone production may explain part of the increased risk for hormone-related cancers observed in night shift workers. ©2015 American Association for Cancer Research.

  9. Students' educational experiences and interaction with residents on night shifts.

    Science.gov (United States)

    Schiller, Jocelyn; Sokoloff, Max; Tendhar, Chosang; Schmidt, John; Christner, Jennifer

    2017-08-01

    The purpose of this mixed-methods study was to investigate whether increased night shifts for students on paediatric rotations had any negative impact on their overall quality of educational experiences in light of the implementation of duty-hour restrictions. Both quantitative and qualitative data were collected from 30 students on paediatric rotations during the academic year 2011/12. Students completed two questionnaires, one in response to their experiences during the day shifts and another in response to their experiences during the night shifts. Only 25 cases were retained for the final analyses. The non-parametric Wilcoxon signed-rank test was used to analyse the quantitative data, and constant comparative thematic analyses, as described by Creswell, were used to analyse the qualitative data. [Do] increased nights shifts for students … [have] any negative impact on their overall quality of educational experiences[?] RESULTS: The results indicated that students' perceived quality of experiences during the night shifts was greater, compared with their day shifts. Students reported having more time to socialise during the night shifts. They further reported that informal ways of learning, such as impromptu teaching and spontaneous discussions on clinical problems, were more beneficial, and these often occurred in abundance during the night shifts as opposed to the scheduled didactic teaching sessions that occur during the day shifts. This study documented many unanticipated benefits of night shifts. The feeling of cohesiveness of the night team deserves further exploration, as this can be linked to better performance outcomes. More consideration should be given to implementing night shifts as a regular feature of clerkships. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

  10. Measured energy savings from using night temperature setback

    International Nuclear Information System (INIS)

    Szydlowski, R.F.; Wrench, L.E.; O'Neill, P.J.

    1993-01-01

    The measured energy savings resulting from using night temperature setback in typical light-construction wooden office buildings was determined. Researchers installed monitoring equipment in a six-building sample of two-story wooden buildings at Fort Devens, Massachusetts. Data obtained during both single-setting and night-setback operating modes were used to develop models of each building's heat consumption as a function of the difference between inside and outside temperature. These models were used to estimate seasonal savings that could be obtained from the use of night-setback thermostat control. The measured savings in heating energy from using night temperature setback for the six Fort Devens buildings ranged from 14% to 25%; the mean savings was 19.2%. Based on an energy cost of $0.65/therm of natural gas, the estimated average cost savings of using automatic setback thermostats in these buildings is $780 per year per building

  11. 18F-fluorination by crown ether-metal fluoride

    International Nuclear Information System (INIS)

    Irie, T.; Fukushi, K.; Ido, T.; Kasida, Y.; Nozaki, T.

    1982-01-01

    18 F-Fluorination by ''naked'' 18 F - anion produced by complexing anhydrous K 18 F, which was prepared from aqueous 18 F, with 18 -Crown-6 was described for preparing 18 F-21-fluoroprogesterone. In order to find out optimum conditions in this labelling method, various factors were investigated such as the solubility of KF in organic solvents containing 18 -Crown-6 and its reactivity for the nucleophilic displacement of 21-mesylate of progesterone. Chloroform was a good solvent in solubilization of KF and its reactivity. Problems in this labelling procedure were also examined, such as a supporter for transferring the labelled anhydrous K 18 F and reaction vessels. Use of a Teflon reaction vessel resulted in a good radiochemical yield based on the starting activity of $ 18 water. (author)

  12. Influence of ionizing radiation and 12-crown-4 on coagulation system components of rat blood

    International Nuclear Information System (INIS)

    Kratenko, R.Yi.

    2006-01-01

    The influence of 12-crown-4 and ionizing radiation on some components of blood coagulation system: Ca 2+ contents and prostaglandin concentrations in the blood serum, and erythrocyte contents in the blood plasma are studied. The influence of 12-crown-4 and ionizing radiation increases the coagulational properties of erythrocytes. The synergism of ionizing irradiation and 12-crown-4 influence blood coagulation process points out at the occurrence of radiomimetic properties of the latter

  13. Effect of electrostatic interaction on thermochemical behavior of 12-crown-4 ether in various polar solvents

    International Nuclear Information System (INIS)

    Barannikov, Vladimir P.; Guseynov, Sabir S.; Vyugin, Anatoliy I.

    2010-01-01

    The enthalpies of solution of 12-crown-4 ether have been measured in chloroform, ethyl acetate, acetone, pyridine, acetonitrile and methanol at 298.15 K. The values of enthalpy of solvation and solute-solvent interaction were determined from the obtained results and similar literature data for 12-crown-4 in solvents of various polarities. It was shown that the certain correlation is observed between the enthalpy of solute-solvent interaction and the squared dipole moment of the solvent molecules for solutions in tetrachlormethane, ethyl acetate, pyridine, acetonitrile, DMF, DMSO and propylene carbonate. This means that the electrostatic interaction of 12-crown-4 with polar solvent molecules contributes significantly to the exothermic effect of solvation. The understated negative value was found for the enthalpy of interaction of 12-crown-4 with acetone that can be connected with domination of low polar conformer of the crown ether in acetone medium. The most negative values of enthalpy of solvation are observed for solutions in chloroform and water because of hydrogen bonding between O-atoms of crown ether and molecules of the indicated solvents. This effect is not observed for methanol. The negative coefficient of pairwise solute-solute interaction in methanol indicates that the effects of solvophobic solute-solute interaction and H-bonding of the ether molecule with chain associates of methanol are not evinced in the thermochemical behavior of 12-crown-4.

  14. Occupational history of night shift work and Parkinson's disease in Denmark

    DEFF Research Database (Denmark)

    Schernhammer, Eva S; Lassen, Christina F; Kenborg, Line

    2015-01-01

    OBJECTIVES: We investigated whether working night shifts was associated with the risk of Parkinson's disease (PD). METHODS: Between January 2008 and December 2010, we recruited 1808 patients with a confirmed diagnosis of idiopathic PD from Denmark and 1876 population controls matched by year...... shift work and PD [odds ratio (OR) for any type of night work (ie, either permanent or rotating night work) 1.01, 95% confidence interval (95% CI) 0.86-1.21]. Compared with persons who never worked night shifts, risks of those with longer durations of night work did not appear to differ (OR ....95, 95% CI 0.75-1.19, OR 10-19 years= 1.09, 95% CI 0.77-1.53, OR ≥20 years=1.05, 95% CI 0.81-1.37, P for trend=0.23). Associations were similar among men and women. CONCLUSIONS: These data suggest that working night shifts is not associated with PD or that low tolerance for night shift work is an early...

  15. Partial molar volumes of organic solutes in water. XXVI. 15-Crown-5 and 18-crown-6 ethers at temperatures (298 to 573) K and pressures up to 30 MPa

    International Nuclear Information System (INIS)

    Cibulka, Ivan

    2015-01-01

    Highlights: • Density data were obtained in the range T from (298 to 573) K and p up to 30 MPa. • Standard molar volumes of two crown ethers in water are presented. • Group contribution method was designed to estimate standard molar volumes of cyclic ethers. - Abstract: Densities of dilute aqueous solutions of two cyclic ethers, viz. 15-crown-5 and 18-crown-6, measured over the temperature range from (298 to 573) K and at pressures up to 30 MPa using an automated flow vibrating-tube densimeter are reported. Standard molar volumes were evaluated from the measured data. Present data were combined with those obtained previously for several cyclic ethers and predictions of standard molar volumes based on group contribution approach were tested and analysed

  16. The confusing array of tooth-colored crowns.

    Science.gov (United States)

    Christensen, Gordon J

    2003-09-01

    The venerable PFM crown or fixed prosthesis still dominates the tooth-colored restoration market. However, use of PFMs is declining slightly, as the many new all-ceramic and resin-based composite crowns and fixed-prosthesis products flood the market. Several situations may indicate the use of materials other than PFM. They include patients requiring a high level of esthetic acceptability, patients with proven or perceived allergies to the metals used in dentistry and bruxing or clenching patients with metal allergies or desire to eliminate metal from their mouths. PFM restorations have been proven during 40 years of successful use. They provide acceptable esthetics for most situations, minimal fracture during service, proven ability to serve in multiple-unit situations and excellent fit, and the profession has detailed knowledge of these restorations' advantages, disadvantages and physical characteristics. PFM restorations have only a few well-known negative characteristics. Be cautious as you elect to move from the reliability and positive history of PFM to relatively unknown types of restorations.

  17. Assessment of crown fire initiation and spread models in Mediterranean conifer forests by using data from field and laboratory experiments

    Energy Technology Data Exchange (ETDEWEB)

    Rodríguez y Silva, F.; Guijarro, M.; Madrigal, J.; Jiménez, E.; Molina, J.R.; Hernando, C.; Vélez, R.; Vega, J.A.

    2017-11-01

    Aims of study: To conduct the first full-scale crown fire experiment carried out in a Mediterranean conifer stand in Spain; to use different data sources to assess crown fire initiation and spread models, and to evaluate the role of convection in crown fire initiation. Area of study: The Sierra Morena mountains (Coordinates ETRS89 30N: X: 284793-285038; Y: 4218650-4218766), southern Spain, and the outdoor facilities of the Lourizán Forest Research Centre, northwestern Spain. Material and methods: The full-scale crown fire experiment was conducted in a young Pinus pinea stand. Field data were compared with data predicted using the most used crown fire spread models. A small-scale experiment was developed with Pinus pinaster trees to evaluate the role of convection in crown fire initiation. Mass loss calorimeter tests were conducted with P. pinea needles to estimate residence time of the flame, which was used to validate the crown fire spread model. Main results: The commonly used crown fire models underestimated the crown fire spread rate observed in the full-scale experiment, but the proposed new integrated approach yielded better fits. Without wind-forced convection, tree crowns did not ignite until flames from an intense surface fire contacted tree foliage. Bench-scale tests based on radiation heat flux therefore offer a limited insight to full-scale phenomena. Research highlights: Existing crown fire behaviour models may underestimate the rate of spread of crown fires in many Mediterranean ecosystems. New bench-scale methods based on flame buoyancy and more crown field experiments allowing detailed measurements of fire behaviour are needed.

  18. Assessment of crown fire initiation and spread models in Mediterranean conifer forests by using data from field and laboratory experiments

    International Nuclear Information System (INIS)

    Rodríguez y Silva, F.; Guijarro, M.; Madrigal, J.; Jiménez, E.; Molina, J.R.; Hernando, C.; Vélez, R.; Vega, J.A.

    2017-01-01

    Aims of study: To conduct the first full-scale crown fire experiment carried out in a Mediterranean conifer stand in Spain; to use different data sources to assess crown fire initiation and spread models, and to evaluate the role of convection in crown fire initiation. Area of study: The Sierra Morena mountains (Coordinates ETRS89 30N: X: 284793-285038; Y: 4218650-4218766), southern Spain, and the outdoor facilities of the Lourizán Forest Research Centre, northwestern Spain. Material and methods: The full-scale crown fire experiment was conducted in a young Pinus pinea stand. Field data were compared with data predicted using the most used crown fire spread models. A small-scale experiment was developed with Pinus pinaster trees to evaluate the role of convection in crown fire initiation. Mass loss calorimeter tests were conducted with P. pinea needles to estimate residence time of the flame, which was used to validate the crown fire spread model. Main results: The commonly used crown fire models underestimated the crown fire spread rate observed in the full-scale experiment, but the proposed new integrated approach yielded better fits. Without wind-forced convection, tree crowns did not ignite until flames from an intense surface fire contacted tree foliage. Bench-scale tests based on radiation heat flux therefore offer a limited insight to full-scale phenomena. Research highlights: Existing crown fire behaviour models may underestimate the rate of spread of crown fires in many Mediterranean ecosystems. New bench-scale methods based on flame buoyancy and more crown field experiments allowing detailed measurements of fire behaviour are needed.

  19. Transmission electron microscopical study of teenage crown dentin on the nanometer scale

    Energy Technology Data Exchange (ETDEWEB)

    Panfilov, Peter, E-mail: peter.panfilov@urfu.ru [Ural Federal University, Ekaterinburg (Russian Federation); Kabanova, Anna [Ural Federal University, Ekaterinburg (Russian Federation); Guo, Jinming; Zhang, Zaoli [Erich Schmid Institute for Materials Science, Austrian Academy of Sciences, Leoben (Austria)

    2017-02-01

    Statement of significance: This is the first transmission electron microscopic study of teenage crown dentin on the nanometer scale. Samples for TEM were prepared by mechanical thinning and chemical polishing that allowed obtaining the electron transparent foils. It was firstly shown that human dentin possesses the layered morphology: the layers are oriented normally to the main axis of a tooth and have the thickness of ~ 50 nm. HA inorganic phase of teenage crown dentin is in the amorphous state. The cellular structure, which was formed from collagen fibers (diameter is ~ 5 nm), are observed near DEJ region in teenage dentin, whereas bioorganic phase of teenage crown dentin near the pulp camera does not contain the collagen fibers. Cracks in dentin thin foils have sharp tips, but big angles of opening (~ 30{sup °}) with plastic zone ahead crack tip. It means that young crown human dentin exhibits ductile or viscous-elastic fracture behavior on the nanometer scale. - Highlights: • Dentin has layered morphology. • Mineral component of dentin is in amorphous state. • Collagen fibers form cellular structure in dentin. • Cracks in dentin behave by elastic-plastic manner.

  20. Transmission electron microscopical study of teenage crown dentin on the nanometer scale

    International Nuclear Information System (INIS)

    Panfilov, Peter; Kabanova, Anna; Guo, Jinming; Zhang, Zaoli

    2017-01-01

    Statement of significance: This is the first transmission electron microscopic study of teenage crown dentin on the nanometer scale. Samples for TEM were prepared by mechanical thinning and chemical polishing that allowed obtaining the electron transparent foils. It was firstly shown that human dentin possesses the layered morphology: the layers are oriented normally to the main axis of a tooth and have the thickness of ~ 50 nm. HA inorganic phase of teenage crown dentin is in the amorphous state. The cellular structure, which was formed from collagen fibers (diameter is ~ 5 nm), are observed near DEJ region in teenage dentin, whereas bioorganic phase of teenage crown dentin near the pulp camera does not contain the collagen fibers. Cracks in dentin thin foils have sharp tips, but big angles of opening (~ 30 ° ) with plastic zone ahead crack tip. It means that young crown human dentin exhibits ductile or viscous-elastic fracture behavior on the nanometer scale. - Highlights: • Dentin has layered morphology. • Mineral component of dentin is in amorphous state. • Collagen fibers form cellular structure in dentin. • Cracks in dentin behave by elastic-plastic manner.

  1. Train-the-Trainer Video on the Deliberate Night Attack

    National Research Council Canada - National Science Library

    Dyer, Jean

    1998-01-01

    .... Night and day photography illustrate the training sequence needed to master the individual and buddy team skills, battle drills, and situational training exercises that support the night attack...

  2. Occupational history of night shift work and Parkinson's disease in Denmark.

    Science.gov (United States)

    Schernhammer, Eva S; Lassen, Christina F; Kenborg, Line; Ritz, Beate; Olsen, Jørgen H; Hansen, Johnni

    2015-07-01

    We investigated whether working night shifts was associated with the risk of Parkinson's disease (PD). Between January 2008 and December 2010, we recruited 1808 patients with a confirmed diagnosis of idiopathic PD from Denmark and 1876 population controls matched by year of birth and gender. Information on lifelong occupational history, including information on night work, smoking, caffeine and alcohol consumption habits, and family history of PD was collected through structured telephone interviews. Overall, there was no association between a history of night shift work and PD [odds ratio (OR) for any type of night work (ie, either permanent or rotating night work) 1.01, 95% confidence interval (95% CI) 0.86-1.21]. Compared with persons who never worked night shifts, risks of those with longer durations of night work did not appear to differ (OR <10 years=0.95, 95% CI 0.75-1.19, OR 10-19 years= 1.09, 95% CI 0.77-1.53, OR ≥20 years=1.05, 95% CI 0.81-1.37, P for trend=0.23). Associations were similar among men and women. These data suggest that working night shifts is not associated with PD or that low tolerance for night shift work is an early marker of PD. Due to the novel and exploratory nature of these findings, confirmation is needed.

  3. Childhood night terrors and sleepwalking: diagnosis and treatment

    Directory of Open Access Journals (Sweden)

    Sachin Ratan Gedam

    2017-12-01

    Full Text Available Night terrors and sleepwalking are arousal disorders that occur during the first third of night. Combined existence of sleep disorders are rare phenomenon and found to be associated with behavioural and emotional problems. It becomes difficult to diagnose among sleep disorders and epilepsy is an important differential diagnosis. Management with combined approach of pharmacotherapy and psychological counselling is safe and effective. Here, we present a case of night terrors and sleepwalking to highlight the importance of diagnosis and treatment in this condition. To conclude, all medical professionals need to be aware of different parasomnias and its treatment options.

  4. Ready to crown

    LENUS (Irish Health Repository)

    McReynolds, David

    2017-04-01

    When multiple teeth or localised segments of the mouth require crowns, the restorative interventions involved can be psychologically and physically demanding for the operator, patient and dental technician alike.1,2 It is important that all parties involved in restorations of this nature hold a shared understanding of the expected outcome of treatment, with a realistic, common end goal in mind right from the very beginning. Such clarity of thought and communication is key to avoiding biological, mechanical and aesthetic failures in the planning and execution of advanced restorative treatments. Biomechanically stable and aesthetically pleasing provisional restorations are an essential aspect of treatment, which allow teeth to be prepared and provisionalised over multiple appointments within the comfort zone of the operator and patient.3

  5. Radiosensitivity and recovery of tree crowns in a gamma-irradiated northern forest community

    International Nuclear Information System (INIS)

    Buech, R.R.

    1977-01-01

    Crown mortality was observed on 13 tree species in a gamma-irradiated forest community located near Rhinelander, Wis. Observations at the end of the first (1973) and second (1974) postirradiation growing seasons are presented for each species. Crown mortality was most severe during 1973 for Acer rubrum, A. saccharum, Ostrya virginiana, Populus tremuloides, Prunus serotina, Quercus rubra, and Ulmus americana. For some species, however, crown mortality was most severe during 1974. These were Betula alleghaniensis, B. papyrifera, Tilia americana, and possibly Fraxinus americana and F. nigra. These differences in year of primary response are explained on the basis of bud differentiation and mortality. The most resistant species were A. saccharum, O. virginiana, and Populus tremuloides, and the most sensitive were T. americana and U. americana. Others were intermediate in sensitivity. Taken collectively, exposures less than 2 or 3 kr did not seriously affect crowns of most species, whereas exposures exceeding about 40 kr were lethal to the crowns of all tree species. The observed zonation of tree mortality closely approximated predictions published by others except for underestimating the resistance of A. saccharum and overestimating the resistance of T. americana, F. americana, and Prunus serotina. Not surprisingly, the tree stratum of the northern forest community was found to be more radiosensitive than lichen, grassland, or herbaceous communities in other irradiation studies

  6. Separation of americium (III) and strontium (II) using TEHDGA and 18-crown-6

    Energy Technology Data Exchange (ETDEWEB)

    Sinharoy, Prithwish; Khan, Pasupati Nath; Nair, Deepika; Jagasia, Poonam; Dhami, P.S.; Kaushik, C.P.; Banerjee, Kalyan [Bhabha Atomic Research Centre, Mumbai (India). Nuclear Recycle Group; Anitha, M. [Bhabha Atomic Research Centre, Mumbai (India). Rare Earth Development Section; Sharma, J.N. [Bhabha Atomic Research Centre, Mumbai (India). Process Development Div.

    2017-06-01

    This work describes extraction of Am(III) and Sr(II) together with tetra(2-ethylhexyl) diglycolamide (TEHDGA) and selective back-extraction of strontium with a strontium complexant, 18-crown-6, leading to their separation from each other. 0.3 M TEHDGA+5% isodecyl alcohol/n-dodecane was used to extract Am(III) and Sr(II) from 4 M nitric acid into organic phase with very high D (D{sub Am}=1000, D{sub Sr}=22) and 0.1 M 18-crown-6 dissolved in 4 M nitric acid is used for selective stripping of Sr(II) from loaded extract phase. Am(III) left in the extract phase was then stripped with 0.01 M nitric acid. Stripping of Sr(II) was found to increase with increase in 18-crown-6 concentration, at 0.1 M 18-crown-6 dissolved in 4 M nitric acid, 83% of the loaded strontium (D{sub Sr}=0.20) was back-extracted in a single contact while loss of Am(III) was 0.8% (D{sub Am}=122.45). Stoichiometry limit of 1:1 was observed between strontium and 18-crown-6. Strontium was precipitated and separated from the complexant by Na{sub 2}SO{sub 4} or Na{sub 2}CO{sub 3}. This process was tested with simulated solution of high level waste and found suitable for quantitative recovery of strontium with high purity.

  7. [A ten-year clinical study of cracked teeth restored with glass ceramic crowns].

    Science.gov (United States)

    Luo, X P; Yuan, Y; Shi, Y J; Qian, D D

    2016-10-09

    Objective: To evaluate the clinic performance of high strength glass ceramic crowns for the painful cracked teeth during a 10-year observation period. Methods: Forty-two posterior teeth from 36 patients were diagnosed as having a crack, biting painful and sensitivity to cold were selected in the Department of Prosthodontic, Institute and Hospital of Stomatology, Nanjing University Medical School. The lost-wax hot pressed glass ceramic crowns were bonded on the minimally invasive prepared teeth by modern adhesive technology. Patients were interviewed and went through clinic examination after one week, one month, and every six months. Results: The effectiveness of 42 glass ceramic crowns for cracked teeth was evaluated for a mean observation time over 10-year. At the first week, 29(81%) patients were free of pain, three still had sensitivity to cold and chewing pain, three still had sensitivity to cold, one had painful to cold and hot. After one month, two patients still had chewing pain, and one tooth needed endodontic treatment after six months. In 10 years, 2(5%) all ceramic crowns were broken, the other 40 restorations kept good clinical performances with a 10-year survival rate of 95%. Conclusions: The high strength glass ceramic crowns are very effective and successful in treating the cracked teeth and then keep the good mastication function and appearance.

  8. Fit of lithium disilicate crowns fabricated from conventional and digital impressions assessed with micro-CT.

    Science.gov (United States)

    Kim, Jae-Hyun; Jeong, Ji-Hye; Lee, Jin-Han; Cho, Hye-Won

    2016-10-01

    Although the number of lithium disilicate crowns fabricated with computer-aided design and computer-aided manufacturing (CAD-CAM) technology has increased, the accuracy of the prostheses produced by using digital pathways remains unknown. The purpose of this in vitro study was to compare marginal and internal discrepancies of lithium disilicate crowns fabricated from digital and conventional impressions. A typodont mandibular first molar was prepared for a lithium disilicate crown, and 20 duplicate dies were fabricated by milling poly(methyl methacrylate) resin blocks from laboratory scans. Four groups of 5 lithium disilicate crowns each were created by using a CS3500 (Carestream Dental) intraoral digital impression; Trios (3shape) intraoral digital impression; Ceramill Map400 (Amann Girrbach) extraoral digital impression; and a heat-press technique as a control group. All of the IPS e.max CAD (Ivoclar Vivadent AG) crowns were produced using a 5-axis milling engine (Ceramill Motion2). The lithium disilicate crowns were cemented with zinc phosphate cement under finger pressure. Marginal and internal discrepancies were measured using micro-computed tomography (SkyScan1172). One-way ANOVAs with the Tukey honest significant differences test were used for statistical analysis of the data (α=.05). The mean marginal discrepancies of CS3500 lithium disilicate crowns were 129.6 μm, 200.9 μm for Ceramill Map400, and 207.8 μm 176.1 μm for the heat-press technique; and the internal discrepancy volumes for CS3500 were 25.3 mm 3 , 40.7 mm 3 for Trios, 29.1 mm 3 for Ceramill Map400, and 29.1 and 31.4 mm 3 for the heat-press technique. The CS3500 group showed a significantly better marginal discrepancy than the other 3 groups and a smaller internal discrepancy volume than the Trios group (Pdigital impressions, whereas no differences were found between IPS e.max CAD crowns produced from an extraoral digital impression and IPS e.max Press crowns produced using a heat

  9. A night sky model.

    Science.gov (United States)

    Erpylev, N. P.; Smirnov, M. A.; Bagrov, A. V.

    A night sky model is proposed. It includes different components of light polution, such as solar twilight, moon scattered light, zodiacal light, Milky Way, air glow and artificial light pollution. The model is designed for calculating the efficiency of astronomical installations.

  10. Light at Night Markup Language (LANML): XML Technology for Light at Night Monitoring Data

    Science.gov (United States)

    Craine, B. L.; Craine, E. R.; Craine, E. M.; Crawford, D. L.

    2013-05-01

    Light at Night Markup Language (LANML) is a standard, based upon XML, useful in acquiring, validating, transporting, archiving and analyzing multi-dimensional light at night (LAN) datasets of any size. The LANML standard can accommodate a variety of measurement scenarios including single spot measures, static time-series, web based monitoring networks, mobile measurements, and airborne measurements. LANML is human-readable, machine-readable, and does not require a dedicated parser. In addition LANML is flexible; ensuring future extensions of the format will remain backward compatible with analysis software. The XML technology is at the heart of communicating over the internet and can be equally useful at the desktop level, making this standard particularly attractive for web based applications, educational outreach and efficient collaboration between research groups.

  11. Evolution of the ATLAS Nightly Build System

    International Nuclear Information System (INIS)

    Undrus, A

    2012-01-01

    The ATLAS Nightly Build System is a major component in the ATLAS collaborative software organization, validation, and code approval scheme. For over 10 years of development it has evolved into a factory for automatic release production and grid distribution. The 50 multi-platform branches of ATLAS releases provide vast opportunities for testing new packages, verification of patches to existing software, and migration to new platforms and compilers for ATLAS code that currently contains 2200 packages with 4 million C++ and 1.4 million python scripting lines written by about 1000 developers. Recent development was focused on the integration of ATLAS Nightly Build and Installation systems. The nightly releases are distributed and validated and some are transformed into stable releases used for data processing worldwide. The ATLAS Nightly System is managed by the NICOS control tool on a computing farm with 50 powerful multiprocessor nodes. NICOS provides the fully automated framework for the release builds, testing, and creation of distribution kits. The ATN testing framework of the Nightly System runs unit and integration tests in parallel suites, fully utilizing the resources of multi-core machines, and provides the first results even before compilations complete. The NICOS error detection system is based on several techniques and classifies the compilation and test errors according to their severity. It is periodically tuned to place greater emphasis on certain software defects by highlighting the problems on NICOS web pages and sending automatic e-mail notifications to responsible developers. These and other recent developments will be presented and future plans will be described.

  12. Rhizoctonia crown and root rot disease nursery

    Science.gov (United States)

    The BSDF cooperative CRR Eastern Evaluation Nursery Rhizoctonia crown and root rot Evaluation Nursery in 2016 was a randomized complete-block design with five replications in 15 feet long, one-row plots (20 in row spacing), at the Saginaw Valley Research and Education Center near Frankenmuth, MI. F...

  13. Fracture resistance of aluminium oxide and lithium disilicate-based crowns using different luting cements: an in vitro study.

    Science.gov (United States)

    Al-Wahadni, Ahed M; Hussey, David L; Grey, Nicholas; Hatamleh, Muhanad M

    2009-03-01

    The aim of this study was to investigate the fracture resistance of two types of ceramic crowns cemented with two different cements. Forty premolar crowns were fabricated using lithium-disilicate (IPS Empress-2) and glass-infiltrated aluminium-oxide (In-Ceram) ceramic systems. The crowns were divided into four groups (n=10) with Group 1 (IPS Empress-2) and Group 2 (In-Ceram) cemented with glass ionomer cement. Group 3 (IPS Empress-2) and Group 4 (In-Ceram) were cemented with resin cement. Crowns were tested in a universal testing machine at a compressive-load speed of 10 mm/min. Fracture modes were grouped into five categories. One way analysis of variance (ANOVA) and Bonferroni post-hoc tests were used to detect statistical significances (p0.05) on fracture resistance within each ceramic system tested. In-Ceram crowns cemented with either glass ionomer or resin cements exhibited a statistically significantly higher fracture-resistance than IPS Empress-2 crowns (pEmpress-2 and In-Ceram crowns was not affected by the type of cement used for luting. Both In-Ceram and IPS Empress-2 crowns can be successfully luted with the cements tested with In-Ceram exhibiting higher fracture resistance than IPS Empress-2.

  14. Composite Bonding to Stainless Steel Crowns Using a New Universal Bonding and Single-Bottle Systems

    OpenAIRE

    Mohammad Ali Hattan; Sharat Chandra Pani; Mohammad AlOmari

    2013-01-01

    Aim. The aim of this study is to evaluate the shear bond strength of nanocomposite to stainless steel crowns using a new universal bonding system. Material and Methods. Eighty (80) stainless steel crowns (SSCs) were divided into four groups (20 each). Packable nanocomposite was bonded to the lingual surface of the crowns in the following methods: Group A without adhesive (control group), Group B using a new universal adhesive system (Scotchbond Universal Adhesive, 3M ESPE, Seefeld, Germany), ...

  15. Fatigue resistance of 2 different CAD/CAM glass-ceramic materials used for single-tooth implant crowns.

    Science.gov (United States)

    Çavuşoğlu, Yeliz; Sahin, Erdal; Gürbüz, Riza; Akça, Kivanç

    2011-10-01

    To evaluate the fatigue resistance of 2 different CAD/CAM in-office monoceramic materials with single-tooth implant-supported crowns in functional area. A metal experimental model with a dental implant was designed to receive in-office CAD/CAM-generated monoceramic crowns. Laterally positioned axial dynamic loading of 300 N at 2 Hz was applied to implant-supported crowns machined from 2 different glass materials for 100,000 cycle. Failures in terms of fracture, crack formation, and chipping were macroscopically recorded and microscopically evaluated. Four of 10 aluminasilicate glass-ceramic crowns fractured at early loading cycles, the rest completed loading with a visible crack formation. Crack formation was recorded for 2 of 10 leucite glass-ceramic crowns. Others completed test without visible damage but fractured upon removal. Lack in chemical adhesion between titanium abutment and dental cement likely reduces the fatigue resistance of machinable glass-ceramic materials. However, relatively better fractural strength of leucite glass-ceramics could be taken into consideration. Accordingly, progress on developmental changes in filler composition of glass-ceramics may be promising. Machinable glass-ceramics do not possess sufficient fatigue resistance for single-tooth implant crowns in functional area.

  16. Design algorithm for generatrix profile of cylindrical crowned rollers

    Directory of Open Access Journals (Sweden)

    Creţu Spiridon

    2017-01-01

    Full Text Available The cross-section of roller profile controls the pressure distribution in the contact area and radically affects the roller bearings basic dynamic load rating and rating lives. Today the most used roller profiles are the logarithmic profile and cylindrical-crowned (ZB profile. The logarithmic profile has a continuous evolution with no discontinuities till the intersection with the end fillet while ZB profile has two more discontinuities at the intersections points between the crowning circle and straight line generatrix. Using a semianalytical method, a numerical study has been carried out to find the optimum ZB profile for rollers incorporated in cylindrical rollers bearings. The basic reference rating life (L10_r has been used as optimization criterion.

  17. Crown ether complexes of actinide elements. An X-ray study of the conformational change of the crown ether within the UO/sub 2/(NO/sub 3/)/sub 2/(H/sub 2/O)/sub 2/(18-crown-6) molecule

    Energy Technology Data Exchange (ETDEWEB)

    Bombieri, G; De Paoli, G [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi; Immirzi, A

    1978-01-01

    Uranyl nitrate dihydrate-18-crown-6 crystallizes in the triclinic system with a = 9.072(3), b = 9.144(3), c = 8.323(3) A; ..cap alpha.. = 64.53(10)/sup 0/, ..beta.. = 104.23(10)/sup 0/, ..gamma.. = 110.72(10)/sup 0/, space group P1. Its structure has been determined from three dimensional X-ray data collected with an automatic diffractometer at room temperature and refined with full matrix methods to the final conventional R value = 0.038. The uranyl group does not enter into the 18-crown-6 cavity, but presents the usual hexacoordination in the equatorial plane where two water molecules and the bidentate nitrato groups are coordinated trans to each other. The whole structure is constituted by neutral UO/sub 2/(NO/sub 3/)/sub 2/(H/sub 2/O)/sub 2/ units alternated with 18-crown-6 molecules and linked together in infinite chains developing along (001) through a hydrogen bonding system. The cyclic ether assumes two statistically non-equivalent sites in the crystal (occupancy factor 0.7 and 0.3 respectively) related to each other by a 180/sup 0/ rotation about 0(7)...0(7') axis.

  18. Light at Night and Breast Cancer Risk Among California Teachers

    Science.gov (United States)

    Hurley, Susan; Goldberg, Debbie; Nelson, David; Hertz, Andrew; Horn-Ross, Pamela L.; Bernstein, Leslie; Reynolds, Peggy

    2014-01-01

    Background There is convincing evidence that circadian disruption mediated by exposure to light at night promotes mammary carcinogenesis in rodents. The role that light at night plays in human breast cancer etiology remains unknown. We evaluated the relationship between estimates of indoor and outdoor light at night and the risk of breast cancer among members of the California Teachers Study. Methods Indoor light-at-night estimates were based on questionnaire data regarding sleep habits and use of night time lighting while sleeping. Estimates of outdoor light at night were derived from imagery data obtained from the U.S. Defense Meteorological Satellite Program assigned to geocoded addresses of study participants. Analyses were conducted among 106,731 California Teachers Study members who lived in California, had no prior history of breast cancer, and provided information on lighting while sleeping. 5,095 cases of invasive breast cancer diagnosed 1995–2010 were identified via linkage to the California Cancer Registry. We used age-stratified Cox proportional hazard models to calculate hazard ratios (HRs) with 95% confidence intervals (CIs), adjusting for breast cancer risk factors and neighborhood urbanization and socioeconomic class. Results An increased risk was found for women living in areas with the highest quintile of outdoor light at night exposure estimates (HR=1.12 [95% CI=1.00 – 1.26], test for trend, P=0.06). While more pronounced among premenopausal women (HR=1.34 [95% CI=1.07 – 1.69], test for trend, P=0.04), the associations did not differ statistically by menopausal status (test for interaction, P=0.34). Conclusions Women living in areas with high levels of ambient light at night may be at an increased risk of breast cancer. Future studies that integrate quantitative measurements of indoor and outdoor light at night are warranted. PMID:25061924

  19. Modelling available crown fuel for Pinus pinaster Ait. stands in the "Cazorla, Segura and Las Villas Natural Park" (Spain).

    Science.gov (United States)

    Molina, Juan Ramón; Rodríguez y Silva, Francisco; Mérida, Enrique; Herrera, Miguel Ángel

    2014-11-01

    One of the main limiting aspects in the application of crown fire models at landscape scale has been the uncertainty derived to describe canopy fuel stratum. Available crown fuel and canopy bulk density are essential in order to simulate crown fire behaviour and are of potential use in the evaluation of silvicultural treatments. Currently, the more accurate approach to estimate these parameters is to develop allometric models from common stand inventory data. In this sense, maritime pine (Pinus pinaster Aiton) trees were destructively sampled in the South of the Iberian Peninsula, covering natural and artificial stands. Crown fine fuel was separated into size classes and allometric equations that estimate crown fuel load by biomass fractions were developed. Available crown fuel was determined according to the fuel load differences between un-burned and burned trees with similar characteristics. Taking our destructive post-fire inventory into account, available crown fuel was estimated as the sum of needles biomass, 87.63% of the twigs biomass and 62.79% of the fine branches biomass. In spite of the differences between natural and artificial stands, generic models explained 82% (needles biomass), 89% (crown fuel), 92% (available crown fuel) and 94% (canopy bulk density) of the observed variation. Inclusion of the fitted models in fire management decision-making can provide a decision support system for assessing the potential crown fire of different silvicultural alternatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Sleep and recovery in physicians on night call: a longitudinal field study

    Directory of Open Access Journals (Sweden)

    Malmberg Birgitta

    2010-08-01

    Full Text Available Abstract Background It is well known that physicians' night-call duty may cause impaired performance and adverse effects on subjective health, but there is limited knowledge about effects on sleep duration and recovery time. In recent years occupational stress and impaired well-being among anaesthesiologists have been frequently reported for in the scientific literature. Given their main focus on handling patients with life-threatening conditions, when on call, one might expect sleep and recovery to be negatively affected by work, especially in this specialist group. The aim of the present study was to examine whether a 16-hour night-call schedule allowed for sufficient recovery in anaesthesiologists compared with other physician specialists handling less life-threatening conditions, when on call. Methods Sleep, monitored by actigraphy and Karolinska Sleep Diary/Sleepiness Scale on one night after daytime work, one night call, the following first and second nights post-call, and a Saturday night, was compared between 15 anaesthesiologists and 17 paediatricians and ear, nose, and throat surgeons. Results Recovery patterns over the days after night call did not differ between groups, but between days. Mean night sleep for all physicians was 3 hours when on call, 7 h both nights post-call and Saturday, and 6 h after daytime work (p Conclusions Despite considerable sleep loss during work on night call, and unexpectedly short sleep after ordinary day work, the physicians' self-reports indicate full recovery after two nights' sleep. We conclude that these 16-hour night duties were compatible with a short-term recovery in both physician groups, but the limited sleep duration in general still implies a long-term health concern. These results may contribute to the establishment of safe working hours for night-call duty in physicians and other health-care workers.

  1. FEM and Von Mises Analysis on Prosthetic Crowns Structural Elements: Evaluation of Different Applied Materials.

    Science.gov (United States)

    Bramanti, Ennio; Cervino, Gabriele; Lauritano, Floriana; Fiorillo, Luca; D'Amico, Cesare; Sambataro, Sergio; Denaro, Deborah; Famà, Fausto; Ierardo, Gaetano; Polimeni, Antonella; Cicciù, Marco

    2017-01-01

    The aim of this paper is to underline the mechanical properties of dental single crown prosthodontics materials in order to differentiate the possibility of using each material for typical clinical condition and masticatory load. Objective of the investigation is to highlight the stress distribution over different common dental crowns by using computer-aided design software and a three-dimensional virtual model. By using engineering systems of analyses like FEM and Von Mises investigations it has been highlighted the strength over simulated lower first premolar crowns made by chrome cobalt alloy, golden alloy, dental resin, and zirconia. The prosthodontics crown models have been created and put on simulated chewing stresses. The three-dimensional models were subjected to axial and oblique forces and both guaranteed expected results over simulated masticatory cycle. Dental resin presented the low value of fracture while high values have been recorded for the metal alloy and zirconia. Clinicians should choose the better prosthetic solution for the teeth they want to restore and replace. Both prosthetic dental crowns offer long-term success if applied following the manufacture guide limitations and suggestions.

  2. OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies

    Science.gov (United States)

    Gabor, A.; Jivanescu, A.; Zaharia, C.; Hategan, S.; Topala, F. I.; Levai, C. M.; Negrutiu, M. L.; Sinescu, C.; Duma, V.-F.; Bradu, A.; Podoleanu, A. Gh.

    2016-03-01

    Digital impressions were introduced to overcome some of the obstacles due to traditional impression materials and techniques. The aim of this in vitro study is to compare the accuracy of all ceramic crowns obtained with digital impression and CAD-CAM technology with the accuracy of those obtained with conventional impression techniques. Two groups of 10 crowns each have been considered. The digital data obtained from Group 1 have been processed and the all-ceramic crowns were milled with a CAD/CAM technology (CEREC MCX, Sirona). The all ceramic crowns in Group 2 were obtained with the classical technique of pressing (emax, Ivoclar, Vivadent). The evaluation of the marginal adaptation was performed with Time Domain Optical Coherence Tomography (TD OCT), working at a wavelength of 1300 nm. Tri-dimensional (3D) reconstructions of the selected areas were obtained. Based on the findings in this study, one may conclude that the marginal accuracy of all ceramic crowns fabricated with digital impression and the CAD/CAM technique is superior to the conventional impression technique.

  3. Post and core build-ups in crown and bridge abutments: Bio-mechanical advantages and disadvantages.

    Science.gov (United States)

    Mamoun, John

    2017-06-01

    Dentists often place post and core buildups on endodontically treated abutments for crown and bridge restorations. This article analyzes the bio-mechanical purposes, advantages and disadvantages of placing a core or a post and core in an endodontically treated tooth and reviews literature on post and core biomechanics. The author assesses the scientific rationale of the claim that the main purpose of a post is to retain a core, or the claim that posts weaken teeth. More likely, the main function of a post is to help prevent the abutment, on which a crown is cemented, from fracturing such that the abutment separates from the tooth root, at a fracture plane that is located approximately and theoretically at the level of the crown (or ferrule) margin. A post essentially improves the ferrule effect that is provided by the partial fixed denture prosthesis. This paper also explores the difference between bio-mechanical failures of crowns caused by lack of retention or excess taper, versus failures due to a sub-optimal ferrule effect in crown and bridge prostheses.

  4. Selectivity in stripping of alkali-metal cations from crown ether carboxylate complexes

    International Nuclear Information System (INIS)

    Bartsch, R.A.; Walkowiak, W.; Robison, T.W.

    1992-01-01

    To probe the effect of structural variations within the ionophore upon the efficiency and selectivity of solvent extraction, a variety of crown ether carboxylic acids and phosphonic acid monoesters have been synthesized. In other studies the influence of the organic diluent upon extraction efficiency and selectivity has been probed for such proton-ionizable crown ethers. In the present investigation, attention is focused upon selectivity in the stripping step. Although the efficiency of metal ion stripping is often examined in solvent extraction studies, the selectivity of competitive metal ion release under different conditions is much less frequently considered. In this study, competitive stripping of metal ions from chloroform solutions of five-alkali-metal crown ether carboxylates by varying concentrations of aqueous hydrochloric acid is examined. Alkali metals used were Li, Na, K, Rb, and Cs

  5. Simplified cementation of lithium disilicate crowns: Retention with various adhesive resin cement combinations.

    Science.gov (United States)

    Johnson, Glen H; Lepe, Xavier; Patterson, Amanda; Schäfer, Oliver

    2017-09-27

    A composite resin cement and matching self-etch adhesive was developed to simplify the dependable retention of lithium disilicate crowns. The efficacy of this new system is unknown. The purpose of this in vitro study was to determine whether lithium disilicate crowns cemented with a new composite resin and adhesive system and 2 other popular systems provide clinically acceptable crown retention after long-term aging with monthly thermocycling. Extracted human molars were prepared with a flat occlusal surface, 20-degree convergence, and 4 mm axial length. The axio-occlusal line angle was slightly rounded. The preparation surface area was determined by optical scanning and the analysis of the standard tessellation language (STL) files. The specimens were distributed into 3 cement groups (n=12) to obtain equal mean surface areas. Lithium disilicate crowns (IPS e.max Press) were fabricated for each preparation, etched with 9.5% hydrofluoric acid for 15 seconds, and cleaned. Cement systems were RelyX Ultimate with Scotch Bond Universal (3M Dental Products); Monobond S, Multilink Automix with Multilink Primer A and B (Ivoclar Vivadent AG); and NX3 Nexus with OptiBond XTR (Kerr Corp). Each adhesive provided self-etching of the dentin. Before cementation, the prepared specimens were stored in 35°C water. A force of 196 N was used to cement the crowns, and the specimens were polymerized in a 35°C oven at 100% humidity. After 24 hours of storage at 100% humidity, the cemented crowns were thermocycled (5°C to 55°C) for 5000 cycles each month for 6 months. The crowns were removed axially at 0.5 mm/min. The removal force was recorded and the dislodgement stress calculated using the preparation surface area. The type of cement failure was recorded, and the data were analyzed by 1-way ANOVA and the chi-square test (α=.05) after the equality of variances had been assessed with the Levene test. The Levene test was nonsignificant (P=.936). The ANOVA revealed the mean removal

  6. An in vitro evaluation of the integrity of stainless steel crown margins cemented with different luting agents.

    Science.gov (United States)

    Ettinger, R L; Kambhu, P P; Asmussen, C M; Damiano, P C

    1998-01-01

    The elderly population is retaining more teeth which require extensive restorations. The purpose of this study was to identify a luting agent which had the least marginal breakdown when used with stainless steel crowns. Thirty-six caries-free molars were selected, prepared for stainless steel crowns, and embedded in acrylic to support the crown and tooth. The crowns (Unitek/3M) were cemented with 4 different luting agents: (A) Fleck's Cement, (B) Ketac-Cem, (C) All-Bond C & B Cement, and (D) Panavia EX Cement. All the restored teeth were thermocycled and divided into 3 experimental groups. Twelve teeth were stained. The remaining teeth were occlusally loaded and stained. The remaining 12 teeth were thermocycled and stained again. The stainless steel crowns were then sectioned and photographed at 7.5x mag. The dye penetration was evaluated by measurement of the percentage of dye penetration from the crown margin to the cusp tip on each side. Statistical analysis found that the least dye penetration was with All-Bond C & B Cement (p = 0.0001). The most extensive penetration was observed in Ketac-Cem Occlusal loading was a significant factor (p = 0.0001) increasing the dye penetration, but the crown-tooth gap was not.

  7. Evaluation of effectiveness of cement removal from implant-retained crowns using a proposed circular crisscross flossing technique.

    Science.gov (United States)

    Ferreira, Cimara Fortes; Shafter, Mohamed Amer; Jain, Vinay; Wicks, Russel Anthony; Linder, Erno; Ledo, Carlos Alberto da Silva

    2018-02-13

    Extruded cement during dental implant crown cementation may cause peri-implant diseases if not removed adequately. Evaluate the efficiency of removal of cement after cementation of implant crowns using an experimental "circular crisscross flossing technique (CCCFT) flossing technique, compared to the conventional "C" shape flossing technique (CSFT). Twenty-four patients rendered 29 experimental and 29 control crowns. Prefabricated abutments were secured to the implant with the margins at least 1 mm subgingivally. The abutments were scanned using CADCAM technology and Emax crowns were fabricated in duplicates. Each crown was cemented separately and excess cement was removed using the CSFT and the CCFT techniques. After completion of cementation was completed, the screw access holes were accessed and the crown was unscrewed along with the abutment. The samples were disinfected using 70% ethanol for 10 minutes. Crowns were divided into 4 parts using a marker in order to facilitate measurement data collection. Vertical and horizontal measurements were made for extruded cement for each control and experimental groups by means of a digital microscope. One-hundred and seventeen measurements were made for each group. Mann-Whitney test was applied to verify statistical significance between the groups. The CCFT showed a highly statistically significant result (104.8 ± 13.66, pcrowns cementation when compared with the CSFT.

  8. Built historiography in Glasgow’s New Gorbals – the Crown Street Regeneration Project

    Directory of Open Access Journals (Sweden)

    Florian Urban

    2011-12-01

    Full Text Available In 2000, the Crown Street redevelopment in Glasgow’s New Gorbals was completed after a master plan by Piers Gough of the London firm CZWG. Built on symbolically contested grounds that were previously occupied by the Gorbals tenements (1870s-1960s and the high-rise Hutchesontown flats (1960s-1990s, the new development is a textbook example of neo-traditional design. This article looks at the Crown Street redevelopment as a form of built historiography that inscribes a harmonized account of the past into the urban fabric. Like a written narrative, plan and buildings convey a historic narrative through tropes and character types. The historiographic dimension of the Crown Street redevelopment works on three levels. There is the site, which in various moments in the twentieth century came to signify the urban ‘other’ – the city’s underbelly of crime, plight, and misery – and which, as a result of both gentrification and architectural redesign, is now apparently pacified. There are carefully chosen historic references such as tenement façades, bay windows, underpasses, courtyards, and rues corridors, which communicate certain conceptions about recent history. And there is a municipal strategy for Glasgow’s economic revival, of which the re-writing of history is a part, and which, among others, makes use of the Crown Street redevelopment’s architectural imagery. On all three levels the Crown Street redevelopment reconciles conflicting perspectives: on the one hand a break almost as comprehensive as the modernist upheaval, which involved complete redesign and exchange of the population, and on the other hand the conception of historical continuity and long-lasting community life. Conveying a historical image cleared of ambiguities and imperfections, the Crown Street redevelopment thus communicates a message of both renewal and permanence.

  9. Crown-level tree species classification from AISA hyperspectral imagery using an innovative pixel-weighting approach

    Science.gov (United States)

    Liu, Haijian; Wu, Changshan

    2018-06-01

    Crown-level tree species classification is a challenging task due to the spectral similarity among different tree species. Shadow, underlying objects, and other materials within a crown may decrease the purity of extracted crown spectra and further reduce classification accuracy. To address this problem, an innovative pixel-weighting approach was developed for tree species classification at the crown level. The method utilized high density discrete LiDAR data for individual tree delineation and Airborne Imaging Spectrometer for Applications (AISA) hyperspectral imagery for pure crown-scale spectra extraction. Specifically, three steps were included: 1) individual tree identification using LiDAR data, 2) pixel-weighted representative crown spectra calculation using hyperspectral imagery, with which pixel-based illuminated-leaf fractions estimated using a linear spectral mixture analysis (LSMA) were employed as weighted factors, and 3) representative spectra based tree species classification was performed through applying a support vector machine (SVM) approach. Analysis of results suggests that the developed pixel-weighting approach (OA = 82.12%, Kc = 0.74) performed better than treetop-based (OA = 70.86%, Kc = 0.58) and pixel-majority methods (OA = 72.26, Kc = 0.62) in terms of classification accuracy. McNemar tests indicated the differences in accuracy between pixel-weighting and treetop-based approaches as well as that between pixel-weighting and pixel-majority approaches were statistically significant.

  10. The effects of hot nights on mortality in Barcelona, Spain

    Science.gov (United States)

    Royé, D.

    2017-12-01

    Heat-related effects on mortality have been widely analyzed using maximum and minimum temperatures as exposure variables. Nevertheless, the main focus is usually on the former with the minimum temperature being limited in use as far as human health effects are concerned. Therefore, new thermal indices were used in this research to describe the duration of night hours with air temperatures higher than the 95% percentile of the minimum temperature (hot night hours) and intensity as the summation of these air temperatures in degrees (hot night degrees). An exposure-response relationship between mortality due to natural, respiratory, and cardiovascular causes and summer night temperatures was assessed using data from the Barcelona region between 2003 and 2013. The non-linear relationship between the exposure and response variables was modeled using a distributed lag non-linear model. The estimated associations for both exposure variables and mortality shows a relationship with high and medium values that persist significantly up to a lag of 1-2 days. In mortality due to natural causes, an increase of 1.1% per 10% (CI95% 0.6-1.5) for hot night hours and 5.8% per each 10° (CI95% 3.5-8.2%) for hot night degrees is observed. The effects of hot night hours reach their maximum with 100% and lead to an increase by 9.2% (CI95% 5.3-13.1%). The hourly description of night heat effects reduced to a single indicator in duration and intensity is a new approach and shows a different perspective and significant heat-related effects on human health.

  11. An alternative method for estimating crown characteristics of urban trees using digital photographs

    Science.gov (United States)

    Matthew F. Winn; Philip A. Araman

    2012-01-01

    The USDA Forest Service Forest Inventory and Analysis (FIA) program has concluded that statewide urban forest inventories are feasible based on a series of pilot studies initiated in 2001. However, much of the tree crown data collected during inventories are based on visual inspection and therefore highly subjective. In order to objectively determine the crown...

  12. Prospective assessment of CAD/CAM zirconia abutment and lithium disilicate crown restorations: 2.4 year results.

    Science.gov (United States)

    Cooper, Lyndon F; Stanford, Clark; Feine, Jocelyne; McGuire, Michael

    2016-07-01

    Single-tooth implant restorations are commonly used to replace anterior maxillary teeth. The esthetic, functional, and biologic outcomes are, in part, a function of the abutment and crown. The purpose of this clinical study was to describe the implant, abutment, and crown survival and complication rates for CAD/CAM zirconia abutment and lithium disilicate crown restorations for single-tooth implants. As part of a broader prospective investigation that enrolled and treated 141 participants comparing tissue responses at the conical interface (CI; AstraTech OsseoSpeed), flat-to-flat interface (FI; NobelSpeedy), and platform-switch interface (PS; NanoTite Certain Prevail) of single-tooth implants, computer-aided design and computer-aided manufacturing (CAD/CAM) zirconia abutments (ATLANTIS Abutment) and cemented lithium disilicate (e.max) crowns were used in the restoration of all implants. After 2.4 years in function (3 years after implant placement), the implant, abutment, and crown of 110 participants were evaluated. Technical and biologic complications were recorded. Demographic results were tabulated as percentages with mean values and standard deviations. Abutment survival was calculated with the Kaplan-Meier method. After 2.4 years, no abutments or crowns had been lost. Abutment complications (screw loosening, screw fracture, fracture) were absent for all 3 implant groups. Crown complications were limited to 2 crowns debonding and 1 with excess cement (2.5%). Five biological complications (4.0%) were recorded. The overall complication rate was 6.5%. CAD/CAM zirconia abutments restored with cemented lithium disilicate crowns demonstrated high survival on 3 different implant-abutment interface designs. No abutment or abutment screw fracture occurred. The technical complications observed after 2.4 years were minor and reversible. The use of CAD/CAM zirconia abutments with cemented lithium disilicate crowns is associated with high technical and biologic success at 2

  13. INVIS : Integrated night vision surveillance and observation system

    NARCIS (Netherlands)

    Toet, A.; Hogervorst, M.A.; Dijk, J.; Son, R. van

    2010-01-01

    We present the design and first field trial results of the all-day all-weather INVIS Integrated Night Vision surveillance and observation System. The INVIS augments a dynamic three-band false-color nightvision image with synthetic 3D imagery in a real-time display. The night vision sensor suite

  14. Retention of metal-ceramic crowns with contemporary dental cements.

    Science.gov (United States)

    Johnson, Glen H; Lepe, Xavier; Zhang, Hai; Wataha, John C

    2009-09-01

    New types of crown and bridge cement are in use by practitioners, and independent studies are needed to assess their effectiveness. The authors conducted a study in three parts (study A, study B, and study C) and to determine how well these new cements retain metal-ceramic crowns. The authors prepared teeth with a 20-degree taper and a 4-millimeter length. They cast high-noble metal-ceramic copings, then fitted and cemented them with a force of 196 newtons. The types of cements they used were zinc phosphate, resin-modified glass ionomer, conventional resin and self-adhesive modified resin. They thermally cycled the cemented copings, then removed them. They recorded the removal force and calculated the stress of dislodgment by using the surface area of each preparation. They used a single-factor analysis of variance to analyze the data (alpha = .05). The mean stresses necessary to remove crowns, in megapascals, were 8.0 for RelyX Luting (3M ESPE, St. Paul, Minn.), 7.3 for RelyX Unicem (3M ESPE), 5.7 for Panavia F (Kuraray America, New York) and 4.0 for Fuji Plus (GC America, Alsip, Ill.) in study A; 8.1 for RelyX Luting, 2.6 for RelyX Luting Plus (3M ESPE) and 2.8 for Fuji CEM (GC America) in study B; and 4.9 for Maxcem (Kerr, Orange, Calif.), 4.0 for BisCem (Bisco, Schaumburg, Ill.), 3.7 for RelyX Unicem Clicker (3M ESPE), 2.9 for iCEM (Heraeus Kulzer, Armonk, N.Y.) and 2.3 for Fleck's Zinc Cement (Keystone Industries, Cherry Hill, N.J.) in study C. Powder-liquid versions of new cements were significantly more retentive than were paste-paste versions of the same cements. The mean value of crown removal stress for the new self-adhesive modified-resin cements varied appreciably among the four cements tested. All cements retained castings as well as or better than did zinc phosphate cement. Powder-liquid versions of cements, although less convenient to mix, may be a better clinical choice when crown retention is an issue. All cements tested will retain castings

  15. Dim Light at Night Increases Body Mass of Female Mice

    OpenAIRE

    Aubrecht, Taryn G.; Jenkins, Richelle; Nelson, Randy J.

    2014-01-01

    During the past century the prevalence of light at night has increased in parallel with obesity rates. Dim light at night (dLAN) increases body mass in male mice. However, the effects of light at night on female body mass remain unspecified. Thus, female mice were exposed to a standard light/dark (LD; 16h light at ~150 lux/8h dark at ~0 lux) cycle or to light/dim light at night (dLAN; 16h light at ~150 lux/8h dim light at ~5 lux) cycles for six weeks. Females exposed to dLAN increased the rat...

  16. A biological approach to crown fracture: Fracture reattachment - A report of two cases

    Directory of Open Access Journals (Sweden)

    K Vijayaprabha

    2012-01-01

    Full Text Available The development of adhesive dentistry has allowed dentists to use the patient′s own fragment to restore the fractured tooth, which is considered to be the most conservative method of treatment of crown fracture allowing restoration of original dental anatomy, thus rehabilitating function and esthetics in a short time by preserving dental tissues. The tooth fragment reattachment is preferred over full coverage crowns or composite resin restoration because it conserves sound tooth structure, and is more esthetic, maintaining the original anatomy and translucency, and the rate of incisal wear also matches that of original tooth structure. Presented here is a report of two cases of crown fracture managed by reattachment procedures.

  17. Night work and BMI: is it related to on-shift napping?

    Science.gov (United States)

    Silva-Costa, Aline; Griep, Rosane Härter; Rotenberg, Lúcia

    2017-11-17

    On-shift napping can benefit night workers regarding sleep loss, synchronization of circadian rhythms, and alertness. However, few studies on napping can be found in the literature focused on possible health benefits. This cross-sectional study has investigated the role of on-shift napping on the association between night work and BMI in 409 night-shift nursing professionals. The number of working nights and the years of exposure to night work were significantly associated with increased BMI levels among non-nappers, but not among nappers. Results suggest a benefit of napping for weight gain, thus subsidizing occupational health policies on the regulation of on-shift napping among nursing workers.

  18. 18F-fluorination by crown ether-metal fluoride

    International Nuclear Information System (INIS)

    Irie, T.; Fukushi, K.; Ido, T.; Kasida, Y.; Nozaki, T.

    1984-01-01

    For non-carrier-added 18 F-labeling of organic compounds, details were studied concerning the previously developed KF-crown ether method. In the modified method, a minute amount of KOH instead of carrier KF is added for the preparation of the anhydrous 18 F from aqueous carrier-free 18 F. The following factors were examined in order to determine optimum conditions for the preparation of the anhydrous non-carrier-added 18 F and the labeling synthesis with it: effects of the vessel on the evaporation of the 18 F-KOH solution and the amount of added KOH for the conversion of aqueous 18 F to anhydrous 18 F, the solubilized activity of the 18 F obtained by the evaporation in organic solutions containing 18-Crown-6 and the labeling reaction, as exemplified by the synthesis of 21-fluoroprogesterone. (author)

  19. Twelfth night of 1917 and the Moscow art theatre Twelfth night of 1917 and the Moscow art theatre

    Directory of Open Access Journals (Sweden)

    Arkady Ostrovsky

    2008-04-01

    Full Text Available On 15 September, 1917, in a letter to Nemirovich-Danchenko, Stanislavsky renounced the stage of the Moscow Art Theatre: I cannot think about any other roles, because I will never be able to do anything, at least in the Moscow Art Theatre. Maybe in some other area or some other place I will be able to rise. Of course I do not mean in other theatres, but in the studios. Othello — free!...1 After the tragedy Stanislavsky had endured with Selo Stepanchikovo, he threw himself into Studio work. He started rehearsing Twelfth Night, a play he had put on at the Society of Art and Literature in 1897. The Studio production of Twelfth Night was played on 25 December 1917, two months to the day after the Revolution. A few months later, Nikolai Efros published a book about the First Studio. It was dedicated to The Cricket on the Hearth but the words Efros used to describe the atmosphere in which Dickens’s production had opened were equally suitable for Twelfth Night: ‘You remember what sort of days those were? On 15 September, 1917, in a letter to Nemirovich-Danchenko, Stanislavsky renounced the stage of the Moscow Art Theatre: I cannot think about any other roles, because I will never be able to do anything, at least in the Moscow Art Theatre. Maybe in some other area or some other place I will be able to rise. Of course I do not mean in other theatres, but in the studios. Othello — free!...1 After the tragedy Stanislavsky had endured with Selo Stepanchikovo, he threw himself into Studio work. He started rehearsing Twelfth Night, a play he had put on at the Society of Art and Literature in 1897. The Studio production of Twelfth Night was played on 25 December 1917, two months to the day after the Revolution. A few months later, Nikolai Efros published a book about the First Studio. It was dedicated to The Cricket on the Hearth but the words Efros used to describe the atmosphere in which Dickens’s production had opened

  20. [Survival rate of IPS-Empress 2 all-ceramic crowns and bridges: three year's results].

    Science.gov (United States)

    Zimmer, Doris; Gerds, Thomas; Strub, Jörg R

    2004-01-01

    The objective of this prospective clinical study was to calculate the survival rate of IPS-Empress2 crowns and fixed partial dentures (FPD) over a three-year period. In 43 patients 27 IPS-Empress2 crowns and 31 fixed partial dentures were adhesively luted. Crowns were placed on premolars and molars and FPDs were inserted in the anterior and premolar area. Abutments were prepared with a circular 1.2 mm wide shoulder. The clinical follow-up examination took place after 6, 12, 24, 36 and 48 months. After a mean of 38 months, the survival rate (Kaplan-Meier) of all-ceramic crowns was 100% and of the three unit FDP 72.4%. There were a total of six complete failures which occurred only with the three-unit IPS-Empress2 FPDs. Three FPDs exhibited fractures of the framework for which the manufacturer's instructions of connector-dimension was not satisfied, and one FPD exhibited an irreparable incomplete veneer fracture. Further two FPDs showed biological failures. The accuracy of fit and esthetics were clinically satisfactory. The three-year results showed the IPS-Empress2-ceramic as an adequate all-ceramic material for single crowns. The use for FPD needs further critical consideration.

  1. Cooling of the Building Structure by Night-time Ventilation

    DEFF Research Database (Denmark)

    Artmann, Nikolai

    In modern, extensively glazed office buildings, due to high solar and internal loads and increased comfort expectations, air conditioning is increasingly applied even in moderate and cold climates, like in Central and Northern Europe. Particularly in these cases, night-time ventilation is often......, without considering any building-specific parameters. A method for quantifying the climatic cooling potential (CCP) was developed based on degree-hours of the difference between building and external air temperature. Applying this method to climatic data of 259 stations shows very high night cooling...... potential over the whole of Northern Europe and still significant potential in Central, Eastern and even some regions of Southern Europe. However, due to the inherent stochastic properties of weather patterns, series of warmer nights can occur at some locations, where passive cooling by night...

  2. Management of complicated crown-root fracture in central incisors using intentional replantation with 180° rotation: A case report

    Directory of Open Access Journals (Sweden)

    Reyhaneh Faghihian

    2017-01-01

    Full Text Available Introduction: Complicated crown-root fractures are rare and their treatment is complex. Numerous methods such as crown lengthening and orthodontic or surgical extrusion have been described for the treatment of crown-root fracture. The aim of this study was to report managing complicated crown-root fracture using intentional replantation with 180° rotation. Case report: This case report demonstrates successful management of complicated crown-root fracture in central incisor of a 10-year-old boy using intentional replantation with 180° rotation. Discussion: At 18-month follow-up, the replanted tooth revealed normal function with no obvious resorption.

  3. Is global warming mostly at night?

    International Nuclear Information System (INIS)

    Kukla, G.; Quayle, R.G.; Karl, T.

    1994-01-01

    The release of greenhouse gases is expected to lead to substantial future warming. The global mean temperature has indeed risen in recent decades. The causes of the observed warming, and its relation to the greenhouse gas buildup are, however, still debated. One important aspect of the observed temperature change relates to its asymmetry during the day and night. The day-night temperature difference over land in North America, most of Eurasia, Oceania, and portions of Africa and Australia shows a decrease since about 1950. The changes of the daily mean temperature in these areas are principally due to the rising night or early morning temperature, and are accompanied by increasing cloudiness. Their results support the notion that the increase of cloud cover, possibly due to industrial sulfur emissions, mitigates the greenhouse warming. The causes of the changing diurnal temperature range and of the increasing cloudiness will have to be clarified and the future SO 2 emissions reliably projected before any trustworthy prediction of future climates can be made. 37 refs., 7 figs., 2 tabs

  4. Persepsi Wisatawan Terhadap Night Life Attraction

    Directory of Open Access Journals (Sweden)

    Hary Hermawan

    2017-04-01

    ABSTRACT Cabaret is a term performances of music, comedy, dance, drama, and other special mix of art perfomed by men who dressed in women (ladyboy on stage. Cabaret performances in Oyot Godhong Restaurant intended as new tourist attraction that is expected to increase the interest of tourists to visit Malioboro in Yogyakarta, especially to Oyot Godhong Restaurants. Based descriptive study shows that the characteristics travelers who viewed Kabaret show is very diverse, each of which has perceptions and motivations are different. Cabaret performances have qualified to become the cultural attractions are staged at night (night atraction in the city of Yogyakarta. Based on traveler perception indicates that the cabaret performances have beauty or aesthetics, uniqueness, and values that match the criteria criteria of the standard as a tourist attraction. Performances Cabaret in Oyot Godhong Restaurants able to increase the sale value. Oyot Godhong Restaurants previously only form of tourism facilities (amenities, but is now a restaurant that has a tourist attraction (atraction.   Keywords: Cabaret show, night life attractions, tourism attraction, tourists perception, tourism marketing

  5. Do Wild Great Tits Avoid Exposure to Light at Night?

    Directory of Open Access Journals (Sweden)

    Maaike de Jong

    Full Text Available Studies of wild populations have provided important insights into the effects of artificial light at night on organisms, populations and ecosystems. However, in most studies the exact amount of light at night individuals are exposed to remains unknown. Individuals can potentially control their nighttime light exposure by seeking dark spots within illuminated areas. This uncertainty makes it difficult to attribute effects to a direct effect of light at night, or to indirect effects, e.g., via an effect of light at night on food availability. In this study, we aim to quantify the nocturnal light exposure of wild birds in a previously dark forest-edge habitat, experimentally illuminated with three different colors of street lighting, in comparison to a dark control. During two consecutive breeding seasons, we deployed male great tits (Parus major with a light logger measuring light intensity every five minutes over a 24h period. We found that three males from pairs breeding in brightly illuminated nest boxes close to green and red lamp posts, were not exposed to more artificial light at night than males from pairs breeding further away. This suggests, based on our limited sample size, that these males could have been avoiding light at night by choosing a roosting place with a reduced light intensity. Therefore, effects of light at night previously reported for this species in our experimental set-up might be indirect. In contrast to urban areas where light is omnipresent, bird species in non-urban areas may evade exposure to nocturnal artificial light, thereby avoiding direct consequences of light at night.

  6. Evaluation of the Prevalence of Different Treatment Failure Modes after Crown Lengthening Surgical Procedures

    Directory of Open Access Journals (Sweden)

    Amirreza Babaloo

    2016-07-01

    Full Text Available Introduction: Preservation of the health of periodontium is very important for the long-term success of restored teeth and a balance should always be created between the patients’ esthetic requirements and the periodontal health. Failures of crown lengthening procedures are classified into early and late failures. The aim of this study was to evaluate the prevalence of early failures of crown leathering surgical procedures. Materials and methods: In this descriptive/cross-sectional study, 96 patients were selected from those referring to the Department of Periodontitis, Tabriz Faculty of Dentistry, who required crown lengthening procedures. The particulars of these patients were recorded in special forms and the reasons for the failure of surgical procedures were separately determined at 2- and 6-week intervals. In addition, the frequencies of the reasons for failures were determined in percentages and absolute frequencies. Data were analyzed with descriptive statistics (frequencies and percentages using SPSS 21. Statistical significance was set at P<0.05. Results: Evaluation of patients 6 weeks after surgery showed a failure rate of 14.5% for crown lengthening procedures in patients referring to the Department of Periodontics, Tabriz Faculty of Dentistry. The most common reasons for such early failures in the 6th week, in descending order, were a lack of sufficient keratinized gingiva around in tooth in question, fracture of the tooth structure after surgery, inadequate surgery (not creating a proper distance between the healthy margin and the crest and the coronal returning of the gingival tissue on the tooth. A lack of sufficient keratinized gingiva around the tooth was the most frequent reason for the early failure of crown lengthening procedure at both study intervals. Conclusion: It can be concluded from the results of the present study that during the 6th postoperative week the crown lengthening procedures exhibited a 14.5% failure rate

  7. Night work and BMI: is it related to on-shift napping?

    Directory of Open Access Journals (Sweden)

    Aline Silva-Costa

    2017-11-01

    Full Text Available ABSTRACT On-shift napping can benefit night workers regarding sleep loss, synchronization of circadian rhythms, and alertness. However, few studies on napping can be found in the literature focused on possible health benefits. This cross-sectional study has investigated the role of on-shift napping on the association between night work and BMI in 409 night-shift nursing professionals. The number of working nights and the years of exposure to night work were significantly associated with increased BMI levels among non-nappers, but not among nappers. Results suggest a benefit of napping for weight gain, thus subsidizing occupational health policies on the regulation of on-shift napping among nursing workers.

  8. A comparative study of night-time enhancement of TEC at a low latitude station on storm and quiet nights including the local time, seasonal and solar activity dependence

    Directory of Open Access Journals (Sweden)

    K. Unnikrishnan

    Full Text Available The main characteristics of night-time enhancements in TEC during magnetic storms are compared with those during quiet nights for different seasons and solar activity conditions at Palehua, a low latitude station during the period 1980–1989. We find that the mean amplitude has both a seasonal and solar activity dependence: in winter, the values are higher for weak storms as compared to those during quiet nights and increase with an increase in solar activity. In summer, the mean amplitude values during weak storms and quiet nights are almost equal. But during equinox, the mean amplitude values for quiet nights are greater than those during weak storms. The mean half-amplitude duration is higher during weak storms as compared to that during quiet nights in summer. However, during winter and equinox, the durations are almost equal for both quiet and weak storm nights. For the mean half-amplitude duration, the quiet night values for all the seasons and equinoctial weak storm values increase with an increase in solar activity. The occurrence frequency (in percent of TEC enhancement during weak storms is greater than during quiet nights for all seasons. The mean amplitude, the mean half-amplitude duration and the occurrence frequency (in percent of TEC enhancement values are higher during major storms as compared to those during quiet nights. The above parameters have their highest values during pre-midnight hours. From the data analysed, this behaviour is true in the case of major storms also.

    Key words. Ionosphere (ionospheric disturbances; plasma convection Magnetospheric physics (storms and substorms

  9. Deconstructing alcohol use on a night out in England: promotions, preloading and consumption.

    Science.gov (United States)

    McClatchley, Kirstie; Shorter, Gillian W; Chalmers, Jenny

    2014-07-01

    To examine alcohol consumed during a drinking event (a single drinking occasion) by those attending public house/on-trade establishments on nights with standard pricing and nights with promotional prices. Data (n = 425) were collected in an ecological momentary assessment over eight nights in two locations (Midlands and London) on both promotional and standard (Saturday) nights. Multiple regression was used to predict event alcohol consumption by sex, age, type of night, alcohol preloading behaviour, marital and employment status, education, Alcohol Use Disorders Identification Test alcohol consumption questions separately or total AUDIT-C and social group size. Mean (UK) units consumed were 11.8 (London) and 14.4 (Midlands). In London, consumption was similar on promotional and standard nights, but in the Midlands, standard night consumption was three units higher. Preloading was reported by 30%; more common on standard nights. Regression analyses revealed being male, preloading and past-year total AUDIT-C were associated with higher event consumption. However, when AUDIT-C questions were added separately, being a standard night was associated with increased event consumption and different AUDIT-C questions were significantly associated with event consumption in each location. Event consumption reflected heavy episodic drinking and was influenced by price. Promotional night consumption either matched standard Saturday night consumption or was slightly lower. In London, there was a significant preference for drinking at least one promotional beverage on promotional nights. On standard nights, consumption was over a wider range of venues, and preloading with off-trade alcohol was more likely. © 2014 Australasian Professional Society on Alcohol and other Drugs.

  10. Reducing the risk of sensitivity and pulpal complications after the placement of crowns and fixed partial dentures.

    Science.gov (United States)

    Brännström, M

    1996-10-01

    Sensitivity after cementation of a crown with glass-ionomer cement is often attributed to an adverse effect on the pulp by the luting agent. Most permanent restorative materials in common use today do not tend to irritate the pulp; the main cause of pulpal damage is infection, the bacteria originating in the smear layer or deep in the dental tubules, inaccessible to caries-excavating procedures. A poorly fitting provisional crown may expose cut dentin to the oral fluids, and mechanical trauma caused by frictional heat during preparation may also damage the pulp. The following precautions are recommended during precementation procedures to reduce the risk of an inflammatory response in the pulp: (1) The provisional crown should be well fitting, covering cervical dentin but not impinging on the periodontal tissues. The permanent crown should be cemented as soon as possible. (2) The superficial smear layer should be removed and the dentinal surface should be treated with an antibacterial solution before the provisional crown is placed. (3) To decrease dentinal permeability under the provisional crown, the dentinal surface should be covered with a liner that can be easily removed before final cementation. (4) to ensure optimal mircomechanical bonding, the dentinal surface should be thoroughly cleaned, and the dentin should be kept moist until cementation. (5) The occlusion should be carefully checked before cementation of the crown.

  11. White Nights rebuts Pravda claims

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that another Russo-foreign joint venture under attack in the Moscow press has denied charges of impropriety and mismanagement in its operations. The White Nights joint venture last month came under scathing attack from Moscow newspaper Pravda, which alleged the venture has reneged on its promises, is virtually bankrupt, and mistreats Russian employees. White Nights is a joint venture owned 50% by Varyeganneftegaz (VNG), a Russian oil and gas enterprise, and 50% by Salomon Inc. unit Phibro Energy Inc., Greenwich, Conn., and Anglo-Suisse (U.S.S.R.) Ltd., a subsidiary of Anglo-Suisse Inc., Houston. The venture started operations Apr. 1, 1991, with a program of workovers, redevelopment, and horizontal wells in West Varyegan and Tagrinsk oil fields in western Siberia

  12. Night eating among veterans with obesity.

    Science.gov (United States)

    Dorflinger, Lindsey M; Ruser, Christopher B; Masheb, Robin M

    2017-10-01

    The obesity rate is higher among veterans than the general population, yet few studies have examined their eating behaviors, and none have examined the presence of night eating and related comorbidities. This study examines night eating syndrome (NES) among veterans seeking weight management treatment, and relationships between NES and weight, insomnia, disordered eating, and psychological variables. The sample consisted of 110 veterans referred to a weight management program at VA Connecticut Healthcare System. More than one out of ten veterans screened positive for NES, and one-third screened positive for insomnia. Most individuals screening positive for NES also screened positive for insomnia. Night eating was associated with higher BMI, and with higher scores on measures of binge eating, emotional overeating, and eating disorder symptomatology. Veterans screening positive for NES were also significantly more likely to screen positive for depression and PTSD. When controlling for insomnia, only the relationships between night eating and binge and emotional eating remained significant. Those screening positive for PTSD were more likely to endorse needing to eat to return to sleep. Findings suggest that both NES and insomnia are common among veterans seeking weight management services, and that NES is a marker for additional disordered eating behavior, specifically binge eating and overeating in response to emotions. Additional studies are needed to further delineate the relationships among NES, insomnia, and psychological variables, as well as to examine whether specifically addressing NES within behavioral weight management interventions can improve weight outcomes and problematic eating behaviors. Published by Elsevier Ltd.

  13. "Twelfth Night" for Kids.

    Science.gov (United States)

    Burdett, Lois; Coburn, Christine

    Aimed at primary-age children, this book brings William Shakespeare's "Twelfth Night" to them, recognizing that children, properly guided, will take to Shakespeare's characters and stories like "ducks to water"; in the process they find their inner voices, they collaborate, they improvise, and they communicate. Illustrated with…

  14. Crown heights in the permanent teeth of 45,X and 45,X/46,XX females.

    Science.gov (United States)

    Pentinpuro, Raija Helena; Lähdesmäki, Raija Eliisa; Niinimaa, Ahti Olavi; Pesonen, Paula Ritva Orvokki; Alvesalo, Lassi Juhani

    2014-11-01

    Previous results regarding human sex chromosome aneuploidies have shown that the X and Y chromosomes affect tooth size and morphology. This study looked for the effect of sex chromosome deficiency on permanent tooth crown heights. The material, from the Finnish KVANTTI Research Project, consisted of 97 45,X females and 15 45,X/46,XX females. The controls were 32 sisters and 28 mothers of the 45,X females, eight sisters and two mothers of the 45,X/46,XX females and 35 female population controls. Crown heights of all the available teeth except third molars on both sides of the jaws were measured from panoramic radiographs with a digital calliper according to the defined procedure. The tooth crown heights were significantly smaller in the 45,X females than in the female population controls, except for the incisors and one canine in the maxilla, whereas the tooth crown heights of the 45,X/46,XX females were close to those of the normal control females. The differences between the 45,X and 45,X/46,XX females were statistically significant, excluding the upper incisor area and a few teeth in the mandible. The effect of the sex chromosome deficiency on permanent tooth crown height is due to the magnitude of lacking sex chromosome material. The present results regarding the 45,X females are parallel to previous findings in Turner patients regarding reduced mesiodistal and labiolingual dimensions and tooth crown heights in the permanent dentition.

  15. FEM and Von Mises Analysis on Prosthetic Crowns Structural Elements: Evaluation of Different Applied Materials

    Directory of Open Access Journals (Sweden)

    Ennio Bramanti

    2017-01-01

    Full Text Available The aim of this paper is to underline the mechanical properties of dental single crown prosthodontics materials in order to differentiate the possibility of using each material for typical clinical condition and masticatory load. Objective of the investigation is to highlight the stress distribution over different common dental crowns by using computer-aided design software and a three-dimensional virtual model. By using engineering systems of analyses like FEM and Von Mises investigations it has been highlighted the strength over simulated lower first premolar crowns made by chrome cobalt alloy, golden alloy, dental resin, and zirconia. The prosthodontics crown models have been created and put on simulated chewing stresses. The three-dimensional models were subjected to axial and oblique forces and both guaranteed expected results over simulated masticatory cycle. Dental resin presented the low value of fracture while high values have been recorded for the metal alloy and zirconia. Clinicians should choose the better prosthetic solution for the teeth they want to restore and replace. Both prosthetic dental crowns offer long-term success if applied following the manufacture guide limitations and suggestions.

  16. STRUCTURE AND THERMAL STABILITY OF THE BENZO-15-CROWN-5 WITH LANTHANUM (III BROMIDE COMPLEX

    Directory of Open Access Journals (Sweden)

    Muhammad Idiris Saleh

    2010-06-01

    Full Text Available The reaction of benzo-15-crown-5 (C14H20O5 ligand with La(NO33.7H2O in the presence of HBr has resulted in the production of an exotic sandwich complex, [LaC28H36Br4O10][3Br]. The crystal system is triclinic with space group P1, a = 12.5834(14 Å, b = 13.5816(16 Å, c = 13.8403(16 Å, a = 70.751(2°, b = 66.773(2° and g = 67.631(2°. The cation comprises of the lanthanum atom coordinated to two crowns via three oxygen atoms from each crown in a η3-sandwich fashion. The two phenyl groups of the crown are brominated. The La-OLigand bond lengths are between 2.857(7 and 2.949(7 Å. The trianion [3Br]3- is linear with Br-Br bond lengths of 2.518(2 and 2.560(2 Å respectively. The molecule is stabilized by intermolecular interactions of the type C-H...Br to form dimers and are arranged parallel to bc face.  Keywords: lanthanum, benzo-15-crown-5, hydrogen bonding, bromination, x-ray structure

  17. Crystal structures of dioxonium hexafluorotantalate and dioxonium hexafluoroniobate complexes with tetrabenzo-30-crown-10

    Energy Technology Data Exchange (ETDEWEB)

    Furmanova, N. G., E-mail: furm@ns.crys.ras.ru; Rabadanov, M. Kh.; Chernaya, T. S. [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation); Fonari, M. S., E-mail: fonari.xray@phys.asm.md; Simonov, Yu. A. [Academy of Sciences of Moldova, Institute of Applied Physics (Moldova, Republic of); Ganin, E. V., E-mail: edganin@yahoo.com [Ministry of Education and Science and National Academy of Sciences of Ukraine, Odessa State Environmental University (Ukraine); Gelmboldt, V. O., E-mail: eksvar@ukr.net [Ministry of Education and Science and National Academy of Sciences of Ukraine, Physicochemical Institute for Human and Environmental Protection (Ukraine); Grigorash, R. Ya.; Kotlyar, S. A.; Kamalov, G. L., E-mail: kamalov@ukr.net.ua [National Academy of Sciences of Ukraine, Bogatsky Physicochemical Institute (Ukraine)

    2008-03-15

    Two isostructural complexes of dioxonium [H{sub 5}O{sub 2}]{sup +} with tetrabenzo-30-crown-10 of the compositions [(tetrabenzo-30-crown-10 {center_dot} H{sub 5}O{sub 2})][TaF{sub 6}] (I) and [(tetrabenzo-30-crown-10 {center_dot} H{sub 5}O{sub 2})][NbF{sub 6}] (II) are studied using X-ray diffraction. The complexes crystallize in the monoclinic crystal system (space group C2/c, Z = 4). The unit cell parameters of these compounds are as follows: a = 15.6583(12) Angstrom-Sign , b = 15.2259(13) Angstrom-Sign , c = 16.4473(13) Angstrom-Sign , and {beta} = 99.398(6) Degree-Sign for complex I and a = 15.7117(12) Angstrom-Sign , b = 15.2785(15) Angstrom-Sign , c = 16.5247(15) Angstrom-Sign , and {beta} = 99.398(7) Degree-Sign for complex II. These complexes belong to the ionic type. The dioxonium cation [H{sub 5}O{sub 2}]{sup +} in the form of the two-unit cluster [H{sub 3}O {center_dot} H{sub 2}O]{sup +} is stabilized by the strong hydrogen bond OH Midline-Horizontal-Ellipsis O [O Midline-Horizontal-Ellipsis O, 2.353(4) Angstrom-Sign ] and encapsulated by the crown ether. Each oxygen atom of the dioxonium cation also forms two oxygen bonds O Midline-Horizontal-Ellipsis O(crown). The crown ether adopts an unusual two-level (pocket-like) conformation, which provides a complete encapsulation of the oxonium associate. The interaction of the cationic complex with the anion in the crystal occurs through contacts of the C-H Midline-Horizontal-Ellipsis F type.

  18. Monitoring Disaster-Related Power Outages Using NASA Black Marble Nighttime Light Product

    Science.gov (United States)

    Wang, Z.; Román, M. O.; Sun, Q.; Molthan, A. L.; Schultz, L. A.; Kalb, V. L.

    2018-04-01

    Timely and accurate monitoring of disruptions to the electricity grid, including the magnitude, spatial extent, timing, and duration of net power losses, is needed to improve situational awareness of disaster response and long-term recovery efforts. Satellite-derived Nighttime Lights (NTL) provide an indication of human activity patterns and have been successfully used to monitor disaster-related power outages. The global 500 m spatial resolution National Aeronautics and Space Administration (NASA) Black Marble NTL daily standard product suite (VNP46) is generated from Visible Infrared Imaging Radiometer Suite (VIIRS) Day/Night Band (DNB) onboard the NASA/National Oceanic and Atmospheric Administration (NOAA) Suomi National Polar-orbiting Partnership (Suomi- NPP) satellite, which began operations on 19 January 2012. With its improvements in product accuracy (including critical atmospheric and BRDF correction routines), the VIIRS daily Black Mable product enables systematic monitoring of outage conditions across all stages of the disaster management cycle.

  19. Delivery outcomes after day and night onset of labour.

    Science.gov (United States)

    Kanwar, Sandeep; Rabindran, Ranjit; Lindow, Stephen W

    2015-11-01

    To describe the outcome of night onset of labour as compared with the day onset of labour to investigate if labour that begins at night is more efficient. Retrospective review of labour and delivery data. A large United Kingdom maternity service. Over the period of 10 years, there were 30,022 deliveries, of which 19,842 were studied. A United Kingdom maternity department database was used to identify deliveries over a 10-year period, and the delivery outcomes were retrieved from these records. The 19,842 labours were divided into two categories: night onset (22.00-06.00 h) and day onset (10.00-18.00 h). Rates of operative intervention, augmentation, epidural usage and labour duration. A significant difference in delivery outcome was noted (P=0.004) with the night-onset labours having more normal deliveries (83.6% vs. 82.5%), fewer caesarean sections (8.7% vs. 10.1%), fewer labour augmentations with syntocinon (14.9% vs. 19.5%, Pnight-onset group and 2414 (30%) in the day-onset group (χ2=1.3, P=NS) Conclusions: Labours that start at night appear to be more efficient than labours that start during the day.

  20. Crown ratio influences allometric scaling in trees

    Science.gov (United States)

    Annikki Makela; Harry T. Valentine

    2006-01-01

    Allometric theories suggest that the size and shape of organisms follow universal rules, with a tendency toward quarter-power scaling. In woody plants, however, structure is influenced by branch death and shedding, which leads to decreasing crown ratios, accumulation of heartwood, and stem and branch tapering. This paper examines the impacts on allometric scaling of...