An analysis of stereotype threat in African American engineering students at predominantly White, ethnically diverse, and historically Black colleges and universities

Science.gov (United States)

Sparks, David M.

The purpose of this research was to distinguish the similarities and differences in coping strategies of African American engineering students by analyzing their perceptions of stereotype threat at three academic institution types, Predominantly White Institutions (PWI), ethnically diverse, and Historically Black Colleges and Universities (HBCUs). The researcher collected demographic and survey data using the Stereotype Vulnerability Scale (SVS). The study was offered to the entire population of African American engineering students at each college using an online survey. Results were analyzed using MANOVA and Pearson's correlational statistical analyses to test the hypotheses. Findings revealed that little differences exist between students' scores on an assessment of stereotype vulnerability, with a few areas showing that HBCUs and ethnically diverse universities are doing a similar job in addressing perceptions of their African American engineering students. Finding also revealed that the percentage of African American students at a university did not correlate with the scores on the SVS accept on questions related to the personal feelings students have about their race. The strongest findings related to the differences in male and female students across the universities. African American female engineering students appeared to perceive more stereotype threat than did their male counterparts; although, this fining was not statistically significant. Overall, no statistically significant differences were found between students' perceptions of stereotype threat at the three types of universities. Future research should expand the number of survey participants at the current universities, add more HBCUs to the study population, run similar experiments in different parts of the country, compare stereotype threat in private and elite universities, use ethnically diverse universities as models for minority student development, and use new or improved survey instruments

Engineering Computer Games: A Parallel Learning Opportunity for Undergraduate Engineering and Primary (K-5 Students

Directory of Open Access Journals (Sweden)

Mark Michael Budnik

2011-04-01

Full Text Available In this paper, we present how our College of Engineering is developing a growing portfolio of engineering computer games as a parallel learning opportunity for undergraduate engineering and primary (grade K-5 students. Around the world, many schools provide secondary students (grade 6-12 with opportunities to pursue pre-engineering classes. However, by the time students reach this age, many of them have already determined their educational goals and preferred careers. Our College of Engineering is developing resources to provide primary students, still in their educational formative years, with opportunities to learn more about engineering. One of these resources is a library of engineering games targeted to the primary student population. The games are designed by sophomore students in our College of Engineering. During their Introduction to Computational Techniques course, the students use the LabVIEW environment to develop the games. This software provides a wealth of design resources for the novice programmer; using it to develop the games strengthens the undergraduates

"You Would Not Believe What I Have to Go through to Prove My Intellectual Value!" Stereotype Management among Academically Successful Black Mathematics and Engineering Students

Science.gov (United States)

McGee, Ebony O.; Martin, Danny B.

2011-01-01

Stereotype management is introduced to explain high achievement and resilience among 23 Black mathematics and engineering college students. Characterized as a tactical response to ubiquitous forms of racism and racialized experiences across school and non-school contexts, stereotype management emerged along overlapping paths of racial, gender, and…

The Effect of Visual of a Courseware towards Pre-University Students' Learning in Literature

Science.gov (United States)

Masri, Mazyrah; Wan Ahmad, Wan Fatimah; Nordin, Shahrina Md.; Sulaiman, Suziah

This paper highlights the effect of visual of a multimedia courseware, Black Cat Courseware (BC-C), developed for learning literature at a pre-university level in University Teknologi PETRONAS (UTP). The contents of the courseware are based on a Black Cat story which is covered in an English course at the university. The objective of this paper is to evaluate the usability and effectiveness of BC-C. A total of sixty foundation students were involved in the study. Quasi-experimental design was employed, forming two groups: experimental and control groups. The experimental group had to interact with BC-C as part of the learning activities while the control group used the conventional learning methods. The results indicate that the experimental group achieved a statistically significant compared to the control group in understanding the Black Cat story. The study result also proves that the effect of visual increases the students' performances in literature learning at a pre-university level.

Interests and attitudes of engineering students

Science.gov (United States)

Rutherford, Brian

2007-12-01

Engineering programs have been less successful than other professions in achieving gender equity. Analyses of gender differences in the attitudes and interests of engineering students may help illuminate ways to combat the underrepresentation of women in engineering. This study examined data collected from 863 engineering students who attended 15 American universities from fall 2005 through spring 2006 using an online survey. The survey was designed to understand the backgrounds, academic preparation, motivation, interests, and attitudes of engineering students. To determine whether males and females received different academic preparation prior to entering engineering, the survey examined participants' mathematics, science, and technical coursework taken in high school. The questions probed students' comfort and interest level in mathematics, science, and technology/engineering and investigated student interest in the three fundamental engineering activities by asking 49 design, build, and analyze questions on topics covering a variety of engineering disciplines. A combination of question formats was used including pre-categorized demographic information, 5-point Likert scales, and open-ended responses. Gender similarities and differences were identified and their implications were considered for the recruitment and retention of engineers. Female engineering students in this study were equally or better prepared than males to major in engineering based on the number and types of science and mathematics classes taken in high school. However, statistically significant gender differences were found in the attitudes and interests of engineering students. The difference in the comfort level, interest in learning, being able to demonstrate, or in performing stem skills depended on the question topic rather than gender. The areas with the highest comfort and interest level were often different for females and males. Several topics and curriculum areas of high interest to

Inquiry-Based Pre-Engineering Activities for K-4 Students

Science.gov (United States)

Perrin, Michele

2004-01-01

This paper uses inquiry-based learning to introduce primary students to the concepts and terminology found in four introductory engineering courses: Differential Equations, Circuit Analysis, Thermodynamics, and Dynamics. Simple electronic sensors coupled with everyday objects, such as a troll doll, demonstrate and reinforce the physical principles…

Elementary Students' Acquisition of Academic Vocabulary Through Engineering Design

Science.gov (United States)

Kugelmass, Rachel

This study examines how STEM (science, technology, engineering, and mathematics) inquiry-based learning through a hands-on engineering design can be beneficial in helping students acquire academic vocabulary. This research took place in a second grade dual- language classroom in a public, suburban elementary school. English language learners, students who speak Spanish at home, and native English speakers were evaluated in this study. Each day, students were presented with a general academic vocabulary focus word during an engineering design challenge. Vocabulary pre-tests and post-tests as well as observation field notes were used to evaluate the student's growth in reading and defining the focus academic vocabulary words. A quiz and KSB (knowledge and skill builder) packet were used to evaluate students' knowledge of science and math content and engineering design. The results of this study indicate that engineering design is an effective means for teaching academic vocabulary to students with varying levels of English proficiency.

The impact of taking a college pre-calculus course on students' college calculus performance

Science.gov (United States)

Sonnert, Gerhard; Sadler, Philip M.

2014-11-01

Poor performance on placement exams keeps many US students who pursue a STEM (science, technology, engineering, mathematics) career from enrolling directly in college calculus. Instead, they must take a pre-calculus course that aims to better prepare them for later calculus coursework. In the USA, enrollment in pre-calculus courses in two- and four-year colleges continues to grow, and these courses are well-populated with students who already took pre-calculus in high school. We examine student performance in college calculus, using regression discontinuity to estimate the effects of taking college pre-calculus or not, in a national US sample of 5507 students at 132 institutions. We find that students who take college pre-calculus do not earn higher calculus grades.

The landscape of PreK-12 engineering online resources for teachers: global trends

OpenAIRE

Bagiati, Aikaterini; Evangelou, Demetra; Magana, Alejandra; Kaloustian, Garene; Zhu, Jiabin; Yoon, So Yoon

2014-01-01

Background: The newly formed discipline of engineering education is addressing the need to (a) enhance STEM education for precollege students and (b) identify optimum ways to introduce engineering content starting, perhaps, from the early ages. Introducing engineering at the Prekindergarten through 12th grade (PreK-12) education level requires significant changes in teacher preparation and support. It highlights the need for developing developmentally appropriate content knowledge and ped...

A Multi-Institution Study of Student Demographics and Outcomes in Chemical Engineering

Science.gov (United States)

Lord, Susan M.; Layton, Richard A.; Ohland, Matthew W.; Brawner, Catherine E.; Long, Russell A.

2014-01-01

Using a large multi-institutional dataset, we describe demographics and outcomes for students starting in and transferring into chemical engineering (ChE). In this dataset, men outnumber women in ChE except among black students. While ChE starters graduate in ChE at rates comparable to or above their racial/ethnic population average for…

A hermeneutic phenomenological study of the experiences of female African American undergraduate engineering students at a predominantly White and an historically Black institution

Science.gov (United States)

Frillman, Sharron Ann

2011-12-01

This phenomenological study examined the experiences of twelve female African Americans enrolled as fulltime undergraduate engineering students at North Carolina Agricultural and Technical State University, an historically Black university, and seven female African Americans enrolled as undergraduate engineering students at Purdue University in West Lafayette, Indiana, a traditionally White institution. Interviews provided insights into the "lived" experiences of these young women and the factors they believe have contributed to their success in their respective engineering programs. Data analysis involved coding each participant's responses to interview questions using Atlas.ti, a powerful qualitative data analysis tool. This generated 181 codes that were further categorized into nine emergent themes, indicating the potential for extensive associations among the variables. The emergent themes are as follows: (1) Demographic information/special circumstances, (2) Personal attributes and characteristics, (3) Personal insights, (4) Sense of mission, (5) Sources of negative stress, (6) Success strategies, (7) Various forms of support, (8) Would/would not have made it to where she is now, and (9) Being African American and female in engineering. Analysis of these themes and their relationships led to the development of the Frillman Model of Emergent Themes in Female African American Engineering Students. Success. In addressing similarities and differences, three overriding theme categories emerged. These were: (1) Four personhood themes and dual social identity theme; (2) Environmental input and response theme; and (3) Outcome emergent theme of Would/Would not have made it to where she is now. Recommendations were made for future research to expand upon this exploratory study.

Racializing Experiences of Foreign-Born and Ethnically Diverse Black Male Engineering Graduate Students: Implications for Student Affairs Practice, Policy, and Research

Science.gov (United States)

Burt, Brian A.; Knight, Alexander; Robeson, Justin

2017-01-01

Despite a growing body of work on the experiences of Black collegians, the higher education knowledge base lacks scholarship focused on Black men in graduate programs who are foreign-born and/or identify ethnically as other than African American. In this article, we provide a domain-specific investigation (i.e., based on students' field of study),…

A Project-Based Engineering and Leadership Workshop for High School Students

Science.gov (United States)

Ryder, Linda Sue; Pegg, Jerine; Wood, Nathan

2012-01-01

Summer outreach programs provide pre-college participants an introduction to college life and exposure to engineering in an effort to raise the level of interest and bring more students into engineering fields. The Junior Engineering, Mathematics, and Science (JEMS) program is a project-based summer workshop in which teams of high school students…

Engaging Community College Students Using an Engineering Learning Community

Science.gov (United States)

Maccariella, James, Jr.

The study investigated whether community college engineering student success was tied to a learning community. Three separate data collection sources were utilized: surveys, interviews, and existing student records. Mann-Whitney tests were used to assess survey data, independent t-tests were used to examine pre-test data, and independent t-tests, analyses of covariance (ANCOVA), chi-square tests, and logistic regression were used to examine post-test data. The study found students that participated in the Engineering TLC program experienced a significant improvement in grade point values for one of the three post-test courses studied. In addition, the analysis revealed the odds of fall-to-spring retention were 5.02 times higher for students that participated in the Engineering TLC program, and the odds of graduating or transferring were 4.9 times higher for students that participated in the Engineering TLC program. However, when confounding variables were considered in the study (engineering major, age, Pell Grant participation, gender, ethnicity, and full-time/part-time status), the analyses revealed no significant relationship between participation in the Engineering TLC program and course success, fall-to-spring retention, and graduation/transfer. Thus, the confounding variables provided alternative explanations for results. The Engineering TLC program was also found to be effective in providing mentoring opportunities, engagement and motivation opportunities, improved self confidence, and a sense of community. It is believed the Engineering TLC program can serve as a model for other community college engineering programs, by striving to build a supportive environment, and provide guidance and encouragement throughout an engineering student's program of study.

Developing a Pre-Engineering Curriculum for 3D Printing Skills for High School Technology Education

Science.gov (United States)

Chien, Yu-Hung

2017-01-01

This study developed an integrated-STEM CO[subscript 2] dragster design course using 3D printing technology. After developing a pre-engineering curriculum, we conducted a teaching experiment to assess students' differences in creativity, race forecast accuracy, and learning performance. We compared student performance in both 3D printing and…

Robust and Fragile Mathematical Identities: A Framework for Exploring Racialized Experiences and High Achievement among Black College Students

Science.gov (United States)

McGee, Ebony O.

2015-01-01

I introduce the construct of fragile and robust identities for the purpose of exploring the experiences that influenced the mathematical and racial identities of high-achieving Black college students in mathematics and engineering. These students maintained high levels of academic achievement in these fields while enduring marginalization,…

Black, White, and Biracial Students' Engagement at Differing Institutional Types

Science.gov (United States)

Harris, Jessica C.; BrckaLorenz, Allison

2017-01-01

Within this study, the authors are interested in engagement practices for Black students, White students, and the mixed-race college student population at Historically Black Colleges and Universities (HBCUs) and non-HBCUs. The authors asked the following research questions: How does engagement compare for Black, White, and biracial students with…

Engineering education for youth: Diverse elementary school students' experiences with engineering design

Science.gov (United States)

Hegedus, Theresa

. Engineering teams required cultivation by the teacher as students negotiated spaces for collaboration through challenges of competition versus compromise; assumed versus assigned roles; management of verbal versus non-verbal communication; and shifts from teacher-as-authority-figure to peers as sources of knowledge and inspiration. The engineering design challenge provided an ideal context for broaching socio-scientific issues and attention to ethical considerations. Students made reference to their growing environmental awareness and developing moral reasoning in their definitions and reflections on green engineering. Throughout the course of the unit, successful students, struggling students, and students with uncertain trajectories established themselves as competent and efficacious engineers. Implications of the study include ways to assist teachers in recognizing and cultivating creativity and collaboration in addition to effectively incorporating socio-scientific issues as part of the engineering (and science) curriculum. I also present recommendations for promoting equity in classroom engineering, pre-service teacher initiatives, and strategies for capitalizing on the complementarity between science and engineering.

The effects of computer-aided design software on engineering students' spatial visualisation skills

Science.gov (United States)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

Preparing University Students to Lead K-12 Engineering Outreach Programmes: A Design Experiment

Science.gov (United States)

Anthony, Anika B.; Greene, Howard; Post, Paul E.; Parkhurst, Andrew; Zhan, Xi

2016-01-01

This paper describes an engineering outreach programme designed to increase the interest of under-represented youth in engineering and to disseminate pre-engineering design challenge materials to K-12 educators and volunteers. Given university students' critical role as facilitators of the outreach programme, researchers conducted a two-year…

Black Hole Astrophysics The Engine Paradigm

CERN Document Server

Meier, David L

2012-01-01

As a result of significant research over the past 20 years, black holes are now linked to some of the most spectacular and exciting phenomena in the Universe, ranging in size from those that have the same mass as stars to the super-massive objects that lie at the heart of most galaxies, including our own Milky Way. This book first introduces the properties of simple isolated holes, then adds in complications like rotation, accretion, radiation, and magnetic fields, finally arriving at a basic understanding of how these immense engines work. Black Hole Astrophysics • reviews our current knowledge of cosmic black holes and how they generate the most powerful observed pheonomena in the Universe; • highlights the latest, most up-to-date theories and discoveries in this very active area of astrophysical research; • demonstrates why we believe that black holes are responsible for important phenomena such as quasars, microquasars and gammaray bursts; • explains to the reader the nature of the violent and spe...

Unique Opportunities: Influence of Study Abroad on Black Students

Science.gov (United States)

Lee, Jasmine; Green, Qiana

2016-01-01

This research adds to the dearth of literature examining the experiences of Black students who study abroad. Additionally, this project extends the literature on the influence of diasporic travel on US Black undergraduate students. Because study abroad has positive benefits for student learning and development (Brux & Fry, 2010), targeted…

Intervention to Improve Engineering Self-Efficacy and Sense of Belonging of First-Year Engineering Students

Science.gov (United States)

Jordan, Kari L.

/her physiological state, and social persuasions, such as student-professor interaction. Increasing the awareness of a student's engineering self-efficacy could potentially improve sense of belonging and persistence for underrepresented minority students in engineering. The hypothesis of this study is that an intervention during the first semester of an incoming freshman's tenure can help improve their engineering self-efficacy, sense of belonging, and overall retention in the engineering program. This study explored the following research questions: 1. What are the differences in engineering self-efficacy, and sense of belonging for first-year underrepresented minority engineering students compared to majority students? 2. What factors or variables should be considered and/or addressed in designing an intervention to increase engineering self-efficacy and sense of belonging amongst first-year underrepresented minority engineering students? 3. Can a small intervention during the beginning of the first semester improve a student's sense of belonging, engineering self-efficacy, and student-professor interaction? Using the race, social fit, and achievement study by Walton and Cohen as a model, the author developed an intervention consisting of short compelling videos of upperclass engineering students from diverse backgrounds. In these videos, students discussed their pursuit of the engineering degree, what obstacles they faced in terms of sense of belonging and coping efficacy, and how they overcame those obstacles. Treatment groups of students watched the videos during the first few weeks of the semester, and pre and post tests were administered to measure mean gains in the student's engineering self-efficacy, sense of belonging, and other variables. The results showed that underrepresented minority students had a lower sense of belonging than whites. The intervention used in the study contributed to mean gain increases in participants' engineering self-efficacy, which could

Black Student Retention in Higher Education.

Science.gov (United States)

Lang, Marvel, Ed.; Ford, Clinita A., Ed.

This collection focuses on problems in the recruitment, enrollment and retention of Blacks in higher education in America. The following chapters are provided: "The Black Student Retention Problem in Higher Education: Some Introductory Perspectives" (Marvel Lang); "Early Acceptance and Institutional Linkages in a Model Program of Recruitment,…

Eliciting and characterizing students' mental models within the context of engineering design

Science.gov (United States)

Dankenbring, Chelsey

Recently, science education reform documents have called for the incorporation of engineering principles and practices into the K-12 science standards and curriculum. One way this has been done is through the use of engineering design tasks as a way for students to apply their scientific understandings to real-world problems. However, minimal studies have documented students' conceptions within the context of engineering design. Thus, the first chapter of this thesis outlines the steps taken to develop a draw-and-explain item that elicited students' mental models regarding the cause of the four seasons after finishing an engineering design task. Students' mental models regarding the reason for the seasons are also described. The second chapter characterizes students' conceptions regarding sun-Earth relationships, specifically the amount of daylight hours throughout the year, for students who completed either an engineering design task or more traditional learning activities. Results from these studies indicate that draw-and-explain items are an effective way of obtaining students' mental models and that students harbor a variety of alternate conceptions on astronomy related concepts within various learning contexts. Implications from this study include the need for further research regarding how engineering design is used in the classroom and how engineering design facilitates science learning. Also, professional development that allows in-service teachers to gain experience teaching engineering design is needed, as are teacher preparation programs that expose pre-service teachers to engineering design.

The Impact of Taking a College Pre-Calculus Course on Students' College Calculus Performance

Science.gov (United States)

Sonnert, Gerhard; Sadler, Philip M.

2014-01-01

Poor performance on placement exams keeps many US students who pursue a STEM (science, technology, engineering, mathematics) career from enrolling directly in college calculus. Instead, they must take a pre-calculus course that aims to better prepare them for later calculus coursework. In the USA, enrollment in pre-calculus courses in two- and…

Chemical Engineering Students: A Distinct Group among Engineers

Science.gov (United States)

Godwin, Allison; Potvin, Geoff

2013-01-01

This paper explores differences between chemical engineering students and students of other engineering disciplines, as identified by their intended college major. The data used in this analysis was taken from the nationally representative Sustainability and Gender in Engineering (SaGE) survey. Chemical engineering students differ significantly…

First year engineering students: Perceptions of engineers and engineering work amongst domestic and international students

Directory of Open Access Journals (Sweden)

Dawn Bennett

2015-03-01

Full Text Available Despite being well ahead of many other disciplines in establishing strong and evidence-based research and practice, engineering in many countries still experiences high rates of student and graduate attrition. One possible reason for this is that students enter engineering study without understanding the realities of either their degree program or engineering work, and without a sense of motivation and commitment. The research reported here aimed to extend understanding of first year engineering students’ thinking about their competencies, identity, self-efficacy, motivation, and career. The study involved over 1,100 first year engineering students enrolled in a common first year unit. Responses were coded using the Engineers Australia graduate competencies as a framework, and this paper reports findings from the most diverse cohort of students (n=260, of whom 49% were international students with English as their second language. The research identified differences between international and domestic students’ perceptions of self and of career competencies, possibly related to self-esteem. Implications include improved confidence and motivation to learn as students consider their strengths, interests and goals. Further, the research raises the need for analysis of international students’ cultural and educational background to determine how different cohorts of international students self-appraise and how they associate learning with their future careers.

Evolution of Students' Varied Conceptualizations About Socially Responsible Engineering: A Four Year Longitudinal Study.

Science.gov (United States)

Rulifson, Greg; Bielefeldt, Angela R

2018-03-20

Engineers should learn how to act on their responsibility to society during their education. At present, however, it is unknown what students think about the meaning of socially responsible engineering. This paper synthesizes 4 years of longitudinal interviews with engineering students as they progressed through college. The interviews revolved broadly around how students saw the connections between engineering and social responsibility, and what influenced these ideas. Using the Weidman Input-Environment-Output model as a framework, this research found that influences included required classes such as engineering ethics, capstone design, and some technical courses, pre-college volunteering and familial values, co-curricular groups such as Engineers Without Borders and the Society of Women Engineers, as well as professional experiences through internships. Further, some experiences such as technical courses and engineering internships contributed to confine students' understanding of an engineer's social responsibility. Overall, students who stayed in engineering tended to converge on basic responsibilities such as safety and bettering society as a whole, but tended to become less concerned with improving the lives of the marginalized and disadvantaged. Company loyalty also became important for some students. These results have valuable, transferable contributions, providing guidance to foster students' ideas on socially responsible engineering.

Engineering students' sustainability approaches

Science.gov (United States)

Haase, S.

2014-05-01

Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The empirical base of the article is a nation-wide, web-based survey sent to all newly enrolled engineering students in Denmark commencing their education in the fall term 2010. The response rate was 46%. The survey focused on a variety of different aspects of what can be conceived as sustainability. By means of cluster analysis, three engineering student approaches to sustainability are identified and described. The article provides knowledge on the different prerequisites of engineering students in relation to the role of sustainability in engineering. This information is important input to educators trying to target new engineering students and contribute to the provision of engineers equipped to meet sustainability challenges.

Political activism and mental health among Black and Latinx college students.

Science.gov (United States)

Hope, Elan C; Velez, Gabriel; Offidani-Bertrand, Carly; Keels, Micere; Durkee, Myles I

2018-01-01

The current study investigates the utility of political activism as a protective factor against experiences of racial/ethnic (R/E) discrimination that negatively affect stress, anxiety, and depressive symptoms among Black and Latinx college freshmen at predominately White institutions. Data come from the Minority College Cohort Study, a longitudinal investigation of Black and Latinx college students (N = 504; 44% Black). We conducted multiple regression analyses for each mental health indicator and tested for interaction effects. For Black and Latinx students, the relationship between R/E microaggressions and end of freshman year stress varied by political activism. For Black students, the relationship between R/E microaggressions and end of the year anxiety varied by political activism. There was a significant interaction effect for depressive symptoms among Latinx students. Political activism serves as a protective factor to mitigate the negative effect of R/E discrimination on stress and depressive symptoms for Latinx students. For Black students, higher levels of political activism may exacerbate experiences of R/E microaggressions and relate to more stress and anxiety compared with Black students who are less politically involved. Findings point to the need for a deeper understanding of phenomenological variation in experiences of microaggressions among R/E minorities and how students leverage political activism as an adaptive coping strategy to mitigate race-related stress during college. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Integration Interrupted: Tracking, Black Students, and Acting White after "Brown"

Science.gov (United States)

Tyson, Karolyn, Ed.

2011-01-01

An all-too-popular explanation for why black students aren't doing better in school is their own use of the "acting white" slur to ridicule fellow blacks for taking advanced classes, doing schoolwork, and striving to earn high grades. Carefully reconsidering how and why black students have come to equate school success with whiteness,…

First-Year Engineering Students' Portrayal of Engineering in a Proposed Museum Exhibit for Middle School Students

Science.gov (United States)

Mena, Irene B.; Diefes-Dux, Heidi A.

2012-04-01

Students' perceptions of engineering have been documented through studies involving interviews, surveys, and word associations that take a direct approach to asking students about various aspects of their understanding of engineering. Research on perceptions of engineering rarely focuses on how students would portray engineering to others. First-year engineering student teams proposed a museum exhibit, targeted to middle school students, to explore the question "What is engineering?" The proposals took the form of a poster. The overarching research question focuses on how these students would portray engineering to middle school students as seen through their museum exhibit proposals. A preliminary analysis was done on 357 posters to determine the overall engineering themes for the proposed museum exhibits. Forty of these posters were selected and, using open coding, more thoroughly analyzed to learn what artifacts/objects, concepts, and skills student teams associate with engineering. These posters were also analyzed to determine if there were any differences by gender composition of the student teams. Building, designing, and teamwork are skills the first-year engineering students link to engineering. Regarding artifacts, students mentioned those related to transportation and structures most often. All-male teams were more likely to focus on the idea of space and to mention teamwork and designing as engineering skills; equal-gender teams were more likely to focus on the multidisciplinary aspect of engineering. This analysis of student teams' proposals provides baseline data, positioning instructors to develop and assess instructional interventions that stretch students' self-exploration of engineering.

Teacher Education and Black Male Students in the United States

Directory of Open Access Journals (Sweden)

H. Richard Milner

2013-10-01

Full Text Available Teacher education programs in the United States (U.S. struggle to prepare teachers to meet the complex needs of elementary and secondary students in public schools - especially those of color, those living in poverty, and those whose first language is not English. In this article, we argue for focused attention on preparing educators to teach African American male students as these students face particular institutional challenges in successfully navigating the U.S. public school system. Drawing from the significant body of research on teacher education and teacher learning for equity and social justice, four Black teacher educators discuss challenges they have faced in classes designed to prepare teachers to teach Black male students. Through an analysis of commonalities in their experiences, they propose means for teacher educators to foster greater understandings of the heterogeneity found among Black male students so that teachers can craft more responsive and responsible educational experiences for Black males.

Selected correlates of white nursing students' attitudes toward black American patients.

Science.gov (United States)

Morgan, B S

1983-01-01

Multivariate analyses were used to examine the relationships between white nursing students' attitudes toward black American patients and variables selected within a theoretical framework of prejudice which included socialization factors and personality-based factors. The variables selected were: authoritarianism and self-esteem (personality-based factors), parents' attitudes toward black Americans, peer attitudes toward black Americans, interracial contact and socioeconomic status (socialization factors). The study also examined the differences in the relationship among white nursing students enrolled in baccalaureate degree, associate degree and diploma nursing programs. Data were collected from 201 senior nursing students enrolled in the three types of nursing programs in Rhode Island during the late fall and winter of 1979-1980. Although baccalaureate degree, associate degree and diploma students were similar in terms of peer attitudes toward black Americans, fathers' attitudes toward black Americans, self-esteem and attitudes toward black American patients, they were significantly different in terms of age, socioeconomic status, mothers' attitudes toward black Americans, interracial contact and authoritarianism. The major findings of this study indicate that the socialization explanation of prejudice is more significant than the personality-based explanation. The variables socioeconomic status, interracial contact and peer attitudes toward black Americans (all socialization variables) accounted for 22.0% of the total variance in attitudes toward black American patients for the total sample of nursing students. However, this relationship was not generalizable across the three different types of nursing programs.

ANALYSIS OF EFFECTIVENESS OF METHODOLOGICAL SYSTEM FOR PROBABILITY AND STOCHASTIC PROCESSES COMPUTER-BASED LEARNING FOR PRE-SERVICE ENGINEERS

Directory of Open Access Journals (Sweden)

E. Chumak

2015-04-01

Full Text Available The author substantiates that only methodological training systems of mathematical disciplines with implementation of information and communication technologies (ICT can meet the requirements of modern educational paradigm and make possible to increase the educational efficiency. Due to this fact, the necessity of developing the methodology of theory of probability and stochastic processes computer-based learning for pre-service engineers is underlined in the paper. The results of the experimental study for analysis of the efficiency of methodological system of theory of probability and stochastic processes computer-based learning for pre-service engineers are shown. The analysis includes three main stages: ascertaining, searching and forming. The key criteria of the efficiency of designed methodological system are the level of probabilistic and stochastic skills of students and their learning motivation. The effect of implementing the methodological system of probability theory and stochastic processes computer-based learning on the level of students’ IT literacy is shown in the paper. The expanding of the range of objectives of ICT applying by students is described by author. The level of formation of students’ learning motivation on the ascertaining and forming stages of the experiment is analyzed. The level of intrinsic learning motivation for pre-service engineers is defined on these stages of the experiment. For this purpose, the methodology of testing the students’ learning motivation in the chosen specialty is presented in the paper. The increasing of intrinsic learning motivation of the experimental group students (E group against the control group students (C group is demonstrated.

Development of a pre-ignition submodel for hydrogen engines

Energy Technology Data Exchange (ETDEWEB)

Al-Baghdadi, Sadiq [University of Babylon (Iraq). Dept. of Mechanical Engineering

2005-10-15

In hydrogen-fuelled spark ignition engine applications, the onset of pre-ignition remains one of the prime limitations that needs to be addressed to avoid its incidence and achieve superior performance. This paper describes a new pre-ignition submodel for engine modelling codes. The effects of changes in key operating variables, such as compression ratio, spark timing, intake pressure, and temperature on pre-ignition limiting equivalence ratios are established both analytically and experimentally. With the established pre-ignition model, it is possible not only to investigate whether pre-ignition is observed with changing operating and design parameters, but also to evaluate those parameters' effects on the maximum possible pre-ignition intensity. (author)

Elementary students' engagement in failure-prone engineering design tasks

Science.gov (United States)

Andrews, Chelsea Joy

Although engineering education has been practiced at the undergraduate level for over a century, only fairly recently has the field broadened to include the elementary level; the pre-college division of the American Society of Engineering Education was established in 2003. As a result, while recent education standards require engineering in elementary schools, current studies are still filling in basic research on how best to design and implement elementary engineering activities. One area in need of investigation is how students engage with physical failure in design tasks. In this dissertation, I explore how upper elementary students engage in failure-prone engineering design tasks in an out-of-school environment. In a series of three empirical case studies, I look closely at how students evaluate failed tests and decide on changes to their design constructions, how their reasoning evolves as they repeatedly encounter physical failure, and how students and facilitators co-construct testing norms where repetitive failure is manageable. I also briefly investigate how students' engagement differs in a task that features near-immediate success. By closely examining student groups' discourse and their interactions with their design constructions, I found that these students: are able to engage in iteration and see failure-as-feedback with minimal externally-imposed structure; seem to be designing in a more sophisticated manner, attending to multiple causal factors, after experiencing repetitive failure; and are able to manage the stress and frustration of repetitive failure, provided the co-constructed testing norms of the workshop environment are supportive of failure management. These results have both pedagogical implications, in terms of how to create and facilitate design tasks, and methodological implications--namely, I highlight the particular insights afforded by a case study approach for analyzing engagement in design tasks.

Self-Assessment and Reflection in a 1st Semester Course for Software Engineering Students

Science.gov (United States)

Nielsen, Jacob; Majgaard, Gunver; Sørensen, Erik

2013-01-01

How can student self-assessment be used as a tool and become beneficial for both lecturers and students? We used a simple self-assessment tool for pre- and post-testing on a first-semester engineering course. The students graded their knowledge on human-computer interaction based on their ability to understand and explain specific concepts. The…

Colleges Try New Techniques in Fierce Competition for Black Students.

Science.gov (United States)

Collison, Michele N-K

1987-01-01

Many institutions have stepped up their efforts to recruit talented black students. Dartmouth's weekend, called "Experience Dartmouth," has become one of its most successful recruitment tools. Weekends planned by undergraduate students and increased involvement of black alumni are described. (MLW)

Black Students in Protest: A Study of the Origins of the Black Student Movement. The Arnold and Caroline Rose Monograph Series in Sociology.

Science.gov (United States)

Orum, Anthony M.

The present study is a sociological rather than an historical treatment of the role of black college students in the civil rights movement. We will determine the characteristic motivation of the typical black student protestor as well as the social and economic conditions that provoked him to protest. The data for our analysis will consist…

Teaching Engineering Students Team Work

Science.gov (United States)

Levi, Daniel

1998-01-01

The purpose of this manual is to provide professor's in engineering classes which the background necessary to use student team projects effectively. This manual describes some of the characteristics of student teams and how to use them in class. It provides a set of class activities and films which can be used to introduce and support student teams. Finally, a set of teaching modules used in freshmen, sophomore, and senior aeronautical engineering classes are presented. This manual was developed as part of a NASA sponsored project to improve the undergraduate education of aeronautical engineers. The project has helped to purchase a set of team work films which can be checked out from Cal Poly's Learning Resources Center in the Kennedy Library. Research for this project has included literature reviews on team work and cooperative learning; interviews, observations, and surveys of Cal Poly students from Industrial and Manufacturing Engineering, Aeronautical Engineering and Psychology; participation in the Aeronautical Engineering senior design lab; and interviews with engineering faculty. In addition to this faculty manual, there is a student team work manual which has been designed to help engineering students work better in teams.

Why Not Academia?--The Streamlined Career Choice Process of Black African Women Engineers: A Grounded Theory Study

Science.gov (United States)

Mlambo, Yeukai Angela

2017-01-01

Black African women are grossly underrepresented as academic staff in engineering programs at South African universities. The problem is exacerbated at historically White institutions (HWI) where Black women are simply absent as engineering research and teaching staff. The absence of Black African women in the academy occurs despite Black African…

Empathy among students in engineering programmes

Science.gov (United States)

Rasoal, Chato; Danielsson, Henrik; Jungert, Tomas

2012-10-01

Engineers face challenges when they are to manage project groups and be leaders for organisations because such positions demand skills in social competence and empathy. Previous studies have shown that engineers have low degrees of social competence skills. In this study, the level of empathy as measured by the four subscales of the Interpersonal Reactivity Index, perspective taking, fantasy, empathic distress and empathic concern, among engineering students was compared to students in health care profession programmes. Participants were undergraduate students at Linköping University, 365 students from four different health care profession programmes and 115 students from two different engineering programmes. When the empathy measures were corrected for effects of sex, engineering students from one of the programmes had lower empathy than psychology and social worker students on the fantasy and perspective-taking subscales. These results raise questions regarding opportunities for engineering students to develop their empathic abilities. It is important that engineering students acquire both theoretical and practical knowledge and skills regarding empathy.

Nine optical black-box experiments for lower-secondary students

Science.gov (United States)

Rode, Henning; Friege, Gunnar

2017-05-01

In this paper a sequence of nine, easy to manufacture optical black-box experiments with increasing levels of difficulty, and supportive frameworks for physics classes are introduced. They have been evaluated in a lower-secondary school at the end of optics lessons. A black-box is a kind of experimental task where the inner structure is not visible to the experimenter. Using mirrors, beam-splitters, and blockers in a black-box to manipulate the light beam’s direction through this specific experiment, students are instructed to vary input and observe the output of light to get an idea of the possible inner structure. The presented sequence of black-box experiments requires a basic knowledge of the linear propagation of light and is suitable for beginner physics. Furthermore a framework for concrete implementation to physics classes is given, which covers suitable structure of class, examples for helpful worksheets, and authentic students’ solutions. The difficulty of the specific black-box experiments is given by the students’ success within observing input-output correlation and conclusion of an inner structure. The experiments’ implementation to physics classes may cover elaboration, practice, and aspects of the nature of science even in a beginner’s class. Evaluation has been conducted with students of young age (11-12 years old), however they are suitable for older students also. Although dealing with a time extensive sequence of experiments, students showed a high level of motivation throughout. Overall, implementing this sequence of black-box experiments is seen as valuable and helpful for physics classes.

Coming to UCT: Black Students, Transformation and Discourses of Race

Science.gov (United States)

Kessi, Shose; Cornell, Josephine

2015-01-01

Since the dismantling of apartheid in South Africa, increasing numbers of black students have been enrolling at historically whites-only universities. This situation has been paralleled by a resurgence of racialising discourses that represent black students as lacking in competencies, lowering academic standards and undeserving of their places at…

Designed by Engineers: An analysis of interactionaries with engineering students

Directory of Open Access Journals (Sweden)

Henrik Artman

2014-12-01

Full Text Available The aim of this study is to describe and analyze learning taking place in a collaborative design exercise involving engineering students. The students perform a time-constrained, open-ended, complex interaction design task, an “interactionary”. A multimodal learning perspective is used. We have performed detailed analyses of video recordings of the engineering students, including classifying aspects of interaction. Our results show that the engineering students carry out and articulate their design work using a technology-centred approach and focus more on the function of their designs than on aspects of interaction. The engineering students mainly make use of ephemeral communication strategies (gestures and speech rather than sketching in physical materials. We conclude that the interactionary may be an educational format that can help engineering students learn the messiness of design work. We further identify several constraints to the engineering students’ design learning and propose useful interventions that a teacher could make during an interactionary. We especially emphasize interventions that help engineering students-retain aspects of human-centered design throughout the design process. This study partially replicates a previous study which involved interaction design students.

External Labor Markets and the Distribution of Black Scientists and Engineers in Academia.

Science.gov (United States)

Kulis, Stephen; Shaw, Heather; Chong, Yinong

2000-01-01

Analyzes data from the 1989 Survey of Doctorate Recipients to evaluate racial segmentation of the academic labor market along geographic and disciplinary lines. Finds that black faculty in the sciences and engineering are found disproportionately in southern, historically black institutions; areas with sizable black populations; and, independent…

The First Year of College: Understanding Student Persistence in Engineering

Science.gov (United States)

Hayden, Marina Calvet

This research study aimed to expand our understanding of the factors that influence student persistence in engineering. The unique experiences of engineering students were examined as they transitioned into and navigated their first year of college at a public research university in California. Most students provided similar responses with respect to the way they experienced the transition to college and social life. There was, however, wide student response variation regarding their experience of academic life and academic policies, as well as in their level of pre-college academic preparation and financial circumstances. One key finding was that students' experiences during the first year of college varied widely based on the extent to which they had acquired organizational and learning skills prior to college. The study used a mixed methods approach. Quantitative and qualitative data were collected through an online survey and one-on-one interviews conducted with freshman students near the end of their first year of college. The theoretical foundations of this study included Astin's Theory of Student Involvement and Tinto's Theory of Student Departure. The design of the study was guided by these theories which emphasize the critical importance of student involvement with the academic and social aspects of college during the first year of college.

Technology Education Benefits from the Inclusion of Pre-Engineering Education

Science.gov (United States)

Rogers, Steve; Rogers, George E.

2005-01-01

Technology education is being taught today in almost every high school and middle school in America. Over 1000 technology education departments are now including pre-engineering education in their programs. According to these authors, the time has come for the profession to agree that including pre-engineering education in technology education…

Exact solutions for shells collapsing towards a pre-existing black hole

International Nuclear Information System (INIS)

Liu Yuan; Zhang Shuangnan

2009-01-01

The gravitational collapse of a star is an important issue both for general relativity and astrophysics, which is related to the well-known 'frozen star' paradox. This paradox has been discussed intensively and seems to have been solved in the comoving-like coordinates. However, to a real astrophysical observer within a finite time, this problem should be discussed in the point of view of the distant rest-observer, which is the main purpose of this Letter. Following the seminal work of Oppenheimer and Snyder (1939), we present the exact solution for one or two dust shells collapsing towards a pre-existing black hole. We find that the metric of the inner region of the shell is time-dependent and the clock inside the shell becomes slower as the shell collapses towards the pre-existing black hole. This means the inner region of the shell is influenced by the property of the shell, which is contrary to the result in Newtonian theory. It does not contradict the Birkhoff's theorem, since in our case we cannot arbitrarily select the clock inside the shell in order to ensure the continuity of the metric. This result in principle may be tested experimentally if a beam of light travels across the shell, which will take a longer time than without the shell. It can be considered as the generalized Shapiro effect, because this effect is due to the mass outside, but not inside as the case of the standard Shapiro effect. We also found that in real astrophysical settings matter can indeed cross a black hole's horizon according to the clock of an external observer and will not accumulate around the event horizon of a black hole, i.e., no 'frozen star' is formed for an external observer as matter falls towards a black hole. Therefore, we predict that only gravitational wave radiation can be produced in the final stage of the merging process of two coalescing black holes. Our results also indicate that for the clock of an external observer, matter, after crossing the event horizon

Science Outside the Lab: Helping Graduate Students in Science and Engineering Understand the Complexities of Science Policy.

Science.gov (United States)

Bernstein, Michael J; Reifschneider, Kiera; Bennett, Ira; Wetmore, Jameson M

2017-06-01

Helping scientists and engineers challenge received assumptions about how science, engineering, and society relate is a critical cornerstone for macroethics education. Scientific and engineering research are frequently framed as first steps of a value-free linear model that inexorably leads to societal benefit. Social studies of science and assessments of scientific and engineering research speak to the need for a more critical approach to the noble intentions underlying these assumptions. "Science Outside the Lab" is a program designed to help early-career scientists and engineers understand the complexities of science and engineering policy. Assessment of the program entailed a pre-, post-, and 1 year follow up survey to gauge student perspectives on relationships between science and society, as well as a pre-post concept map exercise to elicit student conceptualizations of science policy. Students leave Science Outside the Lab with greater humility about the role of scientific expertise in science and engineering policy; greater skepticism toward linear notions of scientific advances benefiting society; a deeper, more nuanced understanding of the actors involved in shaping science policy; and a continued appreciation of the contributions of science and engineering to society. The study presents an efficacious program that helps scientists and engineers make inroads into macroethical debates, reframe the ways in which they think about values of science and engineering in society, and more thoughtfully engage with critical mediators of science and society relationships: policy makers and policy processes.

The Factor Structure of the Vocational Preference Inventory for Black and White College Students

Science.gov (United States)

Yom, B. Lee; And Others

1975-01-01

In the present study, the Vocational Preference Inventory scores for a group of black students and white students were factor analyzed and the black structure was rotated to correspond to the white structure. The correspondence between the variables for black and white students was found to be very similar. (Author)

Perceptions of Financial Aid: Black Students at a Predominantly White Institution

Science.gov (United States)

Tichavakunda, Antar A.

2017-01-01

This study provides qualitative context for statistics concerning Black college students and financial aid. Using the financial nexus model as a framework, this research draws upon interviews with 29 Black juniors and seniors at a selective, -private, and predominantly White university. The data suggest that students -generally exhibited high…

Predicting the academic performance of Asian, black, and Hispanic optometry students.

Science.gov (United States)

Kegel-Flom, P

1990-03-01

As optometry schools receive increasing numbers of Asian, Black, and Hispanic applications, it is appropriate for us to ask whether minority students differ in meaningful ways from nonminority students in measures used in admissions, and whether these variables have differential validity in predicting their achievement in optometry school. This study compares Asian, Black, Hispanic, and nonminority students at entry to the University of Houston College of Optometry (UHCO) from 1981 through 1986 and tests the validity of admissions indices to predict optometry grades, academic dropout, and high-level achievement for these ethnic groups. Although preoptometry grade point average (GPA) was the best predictor of optometry grades for all students, measures of verbal ability were additional predictors for Asian students and, for Black and Hispanic students, ability in study/reading and math were predictors. In addition, personality inventory measures and ratings of the competitiveness of the undergraduate institution were important in differentiating minority academic dropouts from retained students. Suggestions are made for optometry college programs which will enhance the probability of success for minority students.

Montessori Public School Pre-K Programs and the School Readiness of Low-Income Black and Latino Children.

Science.gov (United States)

Ansari, Arya; Winsler, Adam

2014-11-01

Within the United States, there are a variety of early education models and curricula aimed at promoting young children's pre-academic, social, and behavioral skills. This study, using data from the Miami School Readiness Project (MSRP; Winsler et al., 2008, 2012), examined the school readiness gains of low-income Latino ( n = 7,045) and Black children ( n = 6,700) enrolled in two different types of Title-1 public school pre-K programs: those in programs using the Montessori curricula and those in more conventional programs using the High/Scope curricula with a literacy supplement. Parents and teachers reported on children's socio-emotional and behavioral skills with the Devereux Early Childhood Assessment (DECA), while children's pre-academic skills (cognitive, motor, and language) were assessed directly with the Learning Accomplishment Profile Diagnostic (LAP-D) at the beginning and end of their four-year-old pre-K year. All children, regardless of curricula, demonstrated gains across pre-academic, socio-emotional, and behavioral skills throughout the pre-K year; however, all children did not benefit equally from Montessori programs. Latino children in Montessori programs began the year at most risk in pre-academic and behavioral skills, yet exhibited the greatest gains across these domains and ended the year scoring above national averages. Conversely, Black children exhibited healthy gains in Montessori, but demonstrated slightly greater gains when attending more conventional pre-K programs. Findings have implications for tailoring early childhood education programs for Latino and Black children from low-income communities.

Heat engines for dilatonic Born-Infeld black holes

Energy Technology Data Exchange (ETDEWEB)

Bhamidipati, Chandrasekhar; Yerra, Pavan Kumar [Indian Institute of Technology Bhubaneswar, School of Basic Sciences, Bhubaneswar (India)

2017-08-15

In the context of dilaton coupled Einstein gravity with a negative cosmological constant and a Born-Infeld field, we study heat engines where a charged black hole is the working substance. Using the existence of a notion of thermodynamic mass and volume (which depend on the dilaton coupling), the mechanical work takes place via the pdV terms present in the first law of extended gravitational thermodynamics. The efficiency is analyzed as a function of dilaton and Born-Infeld couplings, and the results are compared with analogous computations in the related conformal solutions in the Brans-Dicke-Born-Infeld theory and black holes in anti-de Sitter space-time. (orig.)

Increased Pre- and Post-Meal Free Fatty Acid Levels in Black, Obese Adolescents.

Science.gov (United States)

Cazeau, Rachel-Marie; Rauch, Lindsey; Huang, Hong; Bauer, John A; Hoffman, Robert P

2016-09-01

Black adolescents are at increased risk of cardiometabolic disease but have lower fasting triglyceride, which is usually associated with decreased risk. No one has studied racial differences in triglycerides or free fatty acids (FFAs) after a high-fat meal. Oral glucose tolerance testing was used to assess insulin secretion, sensitivity, and disposition index (DI). Endothelial function, triglycerides, FFA, c-reactive protein, interleukin 6 (IL6), and adiponectin were measured both pre- and 3 hr postprandially (McDonald's Big Breakfast(®) and 12 ounce Sprite(®)) in obese adolescents (10-13 years, 9 black and 7 white). Endothelial function was assessed using reactive hyperemic changes in forearm vascular resistance (FVR). Oral glucose tolerance test (OGTT) showed no difference in insulin sensitivity, but blacks tended to have (P = 0.08) higher insulin secretion and had increased DI (P = 0.003). After a high-fat meal, triglycerides increased in both groups (P < 0.001), tended to be lower in blacks compared with whites preprandially (64 ± 33 mg/dL vs 110 ± 80, P = 0.064), and was lower postprandially (112 ± 63 vs 188 ± 112, P = 0.039). Pre- and postprandial FFA (Black: 0.58 ± 0.15 and 0.39 ± 0.18 vs. white: 0.44 ± 0.14 and 0.26 ± 0.06, P = 0.020) and adiponectin (P = 0.002) were increased in blacks. FFA decreased in both groups postprandially (P = 0.002). IL6 increased after the meal (P = 0.022). Endothelial function decreased postprandially (P < 0.02), but this was due to a decrease in preocclusion FVR. These results indicate that differences in fat metabolism are present in both black and white obese adolescents. How these differences explain higher rates of cardiometabolic disease in blacks is unclear.

Promoting the Academic Engagement and Success of Black Male Student-Athletes

Science.gov (United States)

Harris, Paul C.; Hines, Erik M.; Kelly, Darren D.; Williams, Derick J.; Bagley, Bethany

2014-01-01

The goal of this study was to provide a qualitative look at the factors associated with the academic engagement and success of Black male student-athletes in high school. The research team employed a thematic analysis to examine semi-structured interviews conducted with two successful Black male student-athletes, along with their principal,…

Computer vision syndrome and associated factors among medical and engineering students in chennai.

Science.gov (United States)

Logaraj, M; Madhupriya, V; Hegde, Sk

2014-03-01

Almost all institutions, colleges, universities and homes today were using computer regularly. Very little research has been carried out on Indian users especially among college students the effects of computer use on the eye and vision related problems. The aim of this study was to assess the prevalence of computer vision syndrome (CVS) among medical and engineering students and the factors associated with the same. A cross-sectional study was conducted among medical and engineering college students of a University situated in the suburban area of Chennai. Students who used computer in the month preceding the date of study were included in the study. The participants were surveyed using pre-tested structured questionnaire. Among engineering students, the prevalence of CVS was found to be 81.9% (176/215) while among medical students; it was found to be 78.6% (158/201). A significantly higher proportion of engineering students 40.9% (88/215) used computers for 4-6 h/day as compared to medical students 10% (20/201) (P medical students. Students who used computer for 4-6 h were at significantly higher risk of developing redness (OR = 1.2, 95% CI = 1.0-3.1,P = 0.04), burning sensation (OR = 2.1,95% CI = 1.3-3.1, P computer for less than 4 h. Significant correlation was found between increased hours of computer use and the symptoms redness, burning sensation, blurred vision and dry eyes. The present study revealed that more than three-fourth of the students complained of any one of the symptoms of CVS while working on the computer.

Creativity among Geomatical Engineering Students

Science.gov (United States)

Keh, Lim Keng; Ismail, Zaleha; Yusof, Yudariah Mohammad

2017-01-01

This research aims to find out the creativity among the geomatical engineering students. 96 geomatical engineering students participated in the research. They were divided into 24 groups of 4 students. Each group were asked to solve a real world problem collaboratively with their creative thinking. Their works were collected and then analysed as…

Modeling student success in engineering education

Science.gov (United States)

Jin, Qu

In order for the United States to maintain its global competitiveness, the long-term success of our engineering students in specific courses, programs, and colleges is now, more than ever, an extremely high priority. Numerous studies have focused on factors that impact student success, namely academic performance, retention, and/or graduation. However, there are only a limited number of works that have systematically developed models to investigate important factors and to predict student success in engineering. Therefore, this research presents three separate but highly connected investigations to address this gap. The first investigation involves explaining and predicting engineering students' success in Calculus I courses using statistical models. The participants were more than 4000 first-year engineering students (cohort years 2004 - 2008) who enrolled in Calculus I courses during the first semester in a large Midwestern university. Predictions from statistical models were proposed to be used to place engineering students into calculus courses. The success rates were improved by 12% in Calculus IA using predictions from models developed over traditional placement method. The results showed that these statistical models provided a more accurate calculus placement method than traditional placement methods and help improve success rates in those courses. In the second investigation, multi-outcome and single-outcome neural network models were designed to understand and to predict first-year retention and first-year GPA of engineering students. The participants were more than 3000 first year engineering students (cohort years 2004 - 2005) enrolled in a large Midwestern university. The independent variables include both high school academic performance factors and affective factors measured prior to entry. The prediction performances of the multi-outcome and single-outcome models were comparable. The ability to predict cumulative GPA at the end of an engineering

Impact of an Engineering Case Study in a High School Pre-Engineering Course

Science.gov (United States)

Rutz, Eugene; Shafer, Michelle

2011-01-01

Students at an all-girls high school who were enrolled in an introduction to engineering course were presented an engineering case study to determine if the case study affected their attitudes toward engineering and their abilities to solve engineering problems. A case study on power plants was implemented during a unit on electrical engineering.…

Romanticism and Eroticism among Black and White College Students.

Science.gov (United States)

Houston, Lawrence N.

1981-01-01

A questionnaire was administered to 1,142 Black and White university students of both sexes in an effort to determine the relationship between eroticism, romanticism and sexual identity. Results indicated that males were more erotic, females more romantic, and that the discrepancy was greater for Blacks than for Whites. (Author/CM)

Developing a Vision of Pre-College Engineering Education

Science.gov (United States)

Marshall, Jill A.; Berland, Leema K.

2012-01-01

We report the results of a study focused on identifying and articulating an ''epistemic foundation'' underlying a pre-collegiate focus on engineering. We do so in the context of UTeach"Engineering" (UTE), a program supported in part by funding by the National Science Foundation and designed to develop a model approach to address the…

Communication Needs of Thai Civil Engineering Students

Science.gov (United States)

Kaewpet, Chamnong

2009-01-01

This article reports on an examination of the communication needs of a group of Thai civil engineering students. Twenty-five stakeholders helped identify the communication needs of the students by participating in individual interviews. These included employers, civil engineers, civil engineering lecturers, ex-civil engineering students of the…

USSTRIDE program is associated with competitive Black and Latino student applicants to medical school

OpenAIRE

Campbell, Kendall M.; Berne-Anderson, Thesla; Wang, Aihua; Dormeus, Guy; Rodríguez, José E.

2014-01-01

Purpose: We compared MCAT scores, grade point averages (GPAs), and medical school acceptance rates of Black and Latino students in an outreach program called Undergraduate Science Students Together Reaching Instructional Diversity and Excellence (USSTRIDE) to non-USSTRIDE students. We hypothesized that Black and Latino participants in USSTRIDE had higher acceptance rates to medical school, higher MCAT scores, and college GPAs when compared to other Black and Latino medical school applicants f...

Understanding Black Male Student Athletes' Experiences at a Historically Black College/University: A Mixed Methods Approach

Science.gov (United States)

Cooper, Joseph N.; Hall, Jori

2016-01-01

The purpose of this article is to describe how a mixed methods approach was employed to acquire a better understanding of Black male student athletes' experiences at a historically Black college/university in the southeastern United States. A concurrent triangulation design was incorporated to allow different data sources to be collected and…

The Effectiveness of Entrepreneurship Teaching Materials for Engineering Students at Faculty of Engineering of Universitas Negeri Semarang

Directory of Open Access Journals (Sweden)

Rina Rachmawati

2016-12-01

Full Text Available This research aims to test the effectiveness of entrepreneurship teaching materials for students majoring on Family Wealth Education Department at Faculty of Engineering, Universtas Negeri Semarang. Entrepreneurship teaching materials were developed by researchers by using ADDIE model, and the research only focused on the effectiveness of entrepreneurship teaching materials. It was a quasi-experimental study with a before-after or one group pretest-posttest technique. The research was conducted for 4th semester students of Family Wealth Education Department who studied entrepreneurship subject. In the experimental group, students were taught by teaching materials which were developed by the references of entrepreneurship subject on Higher Education and also was adapted by the conditions of students. Data were collected by using test, questionnaires and learning observation sheets. To test the hypothesis, it used paired t-test analysis and gain-score testing to measure the effectiveness of teaching materials in supporting the Entrepreneurship subject at Family Wealth Education Department of Faculty of Engineering. Findings  show that the entrepreneurship teaching materials are effective and the results of other analysis show that students’ scores are increased from pre-test to post-test who were taught with Entrepreneurship teaching materials.

Female and male Hispanic students majoring in science or engineering: Their stories describing their educational journeys

Science.gov (United States)

Brown, Susan Wightman

National statistics clearly demonstrate an underrepresentation of minorities in the fields of science and engineering. Blacks, Hispanics, American Indians, and Asians do not typically choose science or engineering as their college major; therefore, there is a very small representation of these minorities in the science and engineering labor force. The decision not to major in science and engineering may begin as soon as the child can begin to recognize role models in the media. News stories, magazine articles, television programs, teachers, parents, administrators, and other agencies have painted the picture of a scientist or engineer as being dominantly a White male. Schools have continued society's portrayal by using curriculum, textbooks, role models, instructional strategies, and counseling that continues to encourage the White male to succeed in science and engineering, but discourages the minority students, male and female, from succeeding in these fields. In this qualitative study, 22 Hispanic students, 12 female and 10 male, who are majoring in science or engineering, were interviewed using Seidman's in-depth interviewing technique. These students were shadowed in their college science or engineering classes; their high school and college transcripts were analyzed; and, a focus group was brought together at the end of the interviewing process in order to allow interaction between the participants. The goal was to explore the educational journeys of the 22 Hispanic students. What made a difference in the journeys of these 22 students so that they could succeed in majors that have historically discouraged minority students? Seven themes emerged: family support, honors program, challenging and interactive curriculum, college preparation in high school courses, caring and kind teachers, small class size, and small communities. Gender comparison of the educational journeys documents these differences between the females and males: college preparation, mentoring

Navigating Transitions: Challenges for Engineering Students

Science.gov (United States)

Moore-Russo, Deborah; Wilsey, Jillian N.; Parthum, Michael J., Sr.; Lewis, Kemper

2017-01-01

As college students enter engineering, they face challenges when they navigate across various transitions. These challenges impact whether a student can successfully adapt to the rigorous curricular requirements of an engineering degree and to the norms and expectations that are particular to engineering. This article focuses on the transitions…

Setting the stage for medieval plague: Pre-black death trends in survival and mortality.

Science.gov (United States)

DeWitte, Sharon N

2015-11-01

The 14(th) -century Black Death was one of the most devastating epidemics in human history, killing tens of millions of people in a short period of time. It is not clear why mortality rates during the epidemic were so high. One possibility is that the affected human populations were particularly stressed in the 14(th) century, perhaps as a result of repeated famines in areas such as England. This project examines survival and mortality in two pre-Black Death time periods, 11-12(th) centuries vs 13(th) century CE, to determine if demographic conditions were deteriorating before the epidemic occurred. This study is done using a sample of individuals from several London cemeteries that have been dated, in whole or in part, either to the 11-12(th) centuries (n = 339) or 13(th) century (n = 258). Temporal trends in survivorship and mortality are assessed via Kaplan-Meier survival analysis and by modeling time period as a covariate affecting the Gompertz hazard of adult mortality. The age-at-death distributions from the two pre-Black Death time periods are significantly different, with fewer older adults in 13(th) century. The results of Kaplan-Meier survival analysis indicate reductions in survival before the Black Death, with significantly lower survival in the 13(th) century (Mantel Cox p < 0.001). Last, hazard analysis reveals increases in mortality rates before the Black Death. Together, these results suggest that health in general was declining in the 13(th) century, and this might have led to high mortality during the Black Death. This highlights the importance of considering human context to understand disease in past and living human populations. © 2015 Wiley Periodicals, Inc.

Effect of an Engineering Camp on Students' Perceptions of Engineering and Technology

Science.gov (United States)

Hammack, Rebekah; Ivey, Toni A.; Utley, Juliana; High, Karen A.

2015-01-01

Students' knowledge about a profession influences their future decisions about careers. Research indicates that students tend to hold stereotypical views of engineers, which would hinder engineering as a career choice. The purpose of this study was to measure how participating in a week long engineering summer camp affected middle school students'…

Retaining minorities in engineering: Assessment of a program prototype

Science.gov (United States)

Good, Jennifer Marie (Phillips)

Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation

FEATURES OF FOREIGN STUDENTS PRE-UNIVERSITY MATHEMATICAL TRAINING

Directory of Open Access Journals (Sweden)

Наталья Александровна Пыхтина

2017-12-01

Full Text Available The aim of improving the international competitiveness of the higher education Russian system at the global level by increasing the number of foreign students leads to the fact, that pre-university training is becoming essential for next years at higher educational programmes.Pre-university mathematical training of international students contributes to the scientific style formation of speech skills, which is so useful in higher educational institute. This article highlights some of the features of foreign students pre-university mathematical training.Design of “Mathematics” course methodical ware for preparatory departments of higher educational institutions is an important element of the educational process. Features of mathematics teaching are shown by the example of such important for foreign students pre-university mathematical training branch of mathematics like the set theory.The article also gives consideration to such aspects of mathematics teaching for foreign students as the inclusion of text mathematical problems in the “Mathematics” course programme for helping to achieve lexical skills and abilities, as well as the organization of individual work of the students with the use of information and communication technologies.The paper refers to the collection of exercises and tasks for the “Mathematics” course for foreign citizens studying at the preparatory departments of higher educational institutions, it additionally gives the themes of the course.

Promoting Diversity in STEM through Active Recruiting and Mentoring: The Pre-Major in Astronomy Program (Pre-MAP) at the University of Washington

Science.gov (United States)

Schwieterman, Edward; Binder, Breanna; Tremmel, Michael; Garofali, Kristen; Agol, Eric; Meadows, Victoria

2015-11-01

The Pre-Major in Astronomy Program (Pre-MAP) is a research and mentoring program for underclassmen and transfer students offered by the University of Washington Astronomy Department since 2005. The primary goal of Pre-MAP is to recruit and retain students from groups traditionally underrepresented in science, technology, engineering, and mathematics (STEM) through early exposure to research. The Pre-MAP seminar is the core component of the program and offers instruction in computing skills, data manipulation, science writing, statistical analysis, and scientific speaking and presentation skills. Students choose research projects proposed by faculty, post-docs and graduate students in areas related to astrophysics, planetary science, and astrobiology. Pre-MAP has been successful in retaining underrepresented students in STEM fields relative to the broader UW population, and we've found these students are more likely to graduate and excel academically than their peers. As of spring 2015, more than one hundred students have taken the Pre-MAP seminar, and both internal and external evaluations have shown that all groups of participating students report an increased interest in astronomy and science careers at the end of the seminar. Several former Pre-MAP students have obtained or are pursuing doctoral and master’s degrees in STEM fields; many more work at NASA centers, teaching colleges, or as engineers or data analysts. Pre- MAP student research has produced dozens of publications in peer-reviewed research journals. This talk will provide an overview of the program: the structure of the seminar, examples of projects completed by students, cohort-building activities outside the seminar, funding sources, recruitment strategies, and the aggregate demographic and achievement data of our students. It is our hope that similar programs may be adopted successfully at other institutions.

Enhancement of quality in chemical inquiry by pre-university students.

NARCIS (Netherlands)

van Rens, L.; Pilot, A.; van Dijk, H.

2005-01-01

Our pre-university chemistry students face problems achieving sufficient quality in chemical inquiry. To try to enhance the quality of student performance in chemical inquiry, Dutch pre-university chemistry students (age 17) carried out an authentic research project on 'Diffusion of ions in

Enhancement of quality in chemical inquiry by pre-university students

NARCIS (Netherlands)

van Rens, L.; Pilot, A.; van Dijk, H.

2004-01-01

Our pre-university chemistry students face problems achieving sufficient quality in chemical inquiry. To try to enhance the quality of student performance in chemical inquiry, Dutch pre-university chemistry students (age 17) carried out an authentic research project on 'Diffusion of ions in

Know Your Role: Black College Students, Racial Identity, and Performance

Science.gov (United States)

Stewart, Dafina-Lazarus

2015-01-01

This article is a report of a critical constructivist study of racial identity and performance among 13 Black, traditional-age students enrolled at three different colleges, two historically Black and one predominantly White. The study's approach understood identity to be socially constructed and reliant upon community affirmation and validation.…

Paired peer learning through engineering education outreach

Science.gov (United States)

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

Effects of dark energy on the efficiency of charged AdS black holes as heat engines

Energy Technology Data Exchange (ETDEWEB)

Liu, Hang [Nankai University, School of Physics, Tianjin (China); Meng, Xin-He [Nankai University, School of Physics, Tianjin (China); Chinese Academy of Science, State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Beijing (China)

2017-08-15

In this paper, we study the heat engine where a charged AdS black hole surrounded by dark energy is the working substance and the mechanical work is done via the PdV term in the first law of black hole thermodynamics in the extended phase space. We first investigate the effects of a kind of dark energy (quintessence field in this paper) on the efficiency of the RN-AdS black holes as the heat engine defined as a rectangular closed path in the P-V plane. We get the exact efficiency formula and find that the quintessence field can improve the heat engine efficiency, which will increase as the field density ρ{sub q} grows. At some fixed parameters, we find that a larger volume difference between the smaller black holes(V{sub 1}) and the bigger black holes(V{sub 2}) will lead to a lower efficiency, while the bigger pressure difference P{sub 1} - P{sub 4} will make the efficiency higher, but it is always smaller than 1 and will never be beyond the Carnot efficiency, which is the maximum value of the efficiency constrained by thermodynamics laws; this is consistent to the heat engine in traditional thermodynamics. After making some special choices for the thermodynamical quantities, we find that the increase of the electric charge Q and the normalization factor a can also promote the heat engine efficiency, which would infinitely approach the Carnot limit when Q or a goes to infinity. (orig.)

From Bystander to Upstander Teacher for Gifted Black Students Accused of Acting White

Science.gov (United States)

Grantham, Tarek C.; Biddle, Winfred H.

2014-01-01

Gifted Black students experience many barriers that contribute to their under-representation in gifted and advanced programs. One of the greatest negative influences comes from peer accusations of acting White that undermine gifted and high-achieving Black students' academic motivation and their interest in challenging courses and programs.…

Barriers to student success in engineering education

Science.gov (United States)

Boles, Wageeh; Whelan, Karen

2017-07-01

In the UK, the USA and Australia, there have been calls for an increase in the number of engineering graduates to meet the needs of current global challenges. Universities around the world have been grappling with how to both attract more engineering students and to then retain them. Attrition from engineering programmes is disturbingly high. This paper reports on an element of research undertaken through an Australian Learning and Teaching Council-funded Fellowship that investigated the factors leading to student attrition in engineering programmes, by identifying barriers to student success. Here, we contrast a review of the literature related to student barriers and success with student perceptions, gathered through a series of focus groups and interviews at three Australian universities. We also present recommendations for action to try to remove barriers to student success.

A unicorn's tale: Examining the experiences of Black women in engineering industry

OpenAIRE

Ross, Monique S

2016-01-01

Black women have recently been identified as the most educated demographic in the United States, and yet they are grossly underrepresented in engineering. They comprise 6.4 % of the U.S. population and only 0.72 % of engineering industry. Meanwhile, engineers have been identified as the key to the United States’ ability to maintain its prominence and leadership in a competitive global economy due to their contribution to maintaining and improving our infrastructures and standard of living. Th...

Accuracy of Black and White College Students' In-Group and Out-Group Stereotypes.

Science.gov (United States)

Ryan, Carey S.

1996-01-01

Examined accuracy of black and of white students' in-group and out-group stereotypes by comparing judgments of stereotypicality and dispersion of black and of white first-year college students (N=100) with stereotypicality and dispersion of self-ratings provided by random samples of group members. Consistent with social identity theory,…

Willingness to Participate in Organ Donation among Black Seventh-Day Adventist College Students

Science.gov (United States)

Cort, Malcolm; Cort, David

2008-01-01

Objective and Participants: The authors studied a group of black and white Seventh-Day Adventist (SDA) college students (N = 334) to compare the power of religious socialization with racial socialization. Methods: The authors compared the levels of willingness to donate organs between black and nonblack students in an availability sample. Results:…

Inequality in education and quotas for black students in universities

Directory of Open Access Journals (Sweden)

Eunice R. Durham

Full Text Available This article discusses the proposed definition of quotas for black students in universities in view of the widespread inequalities in the Brazilian educational system. The author defends that the proposed measure would lead to limitations and distortions, for it is based on rigid, artificial categories, in sharp contrast with the country's ethnic heterogeneity, and fails to consider key factors in the schooling experience of afro-descendants. The study of statistical series has shown that in spite of the progress made, there is still a great educational gap dividing white students from black and mulatto students. This led the author to conclude that public initiatives geared to reinforcing basic skills would constitute a more effective affirmative action than the establishment of quotas.

"It's Like Power to Move": Black Students' Psychosocial Experiences in Black Studies Courses at a Predominantly White Institution

Science.gov (United States)

Chapman-Hilliard, Collette; Beasley, Samuel T.

2018-01-01

This study examined Black students' experiences in culture-centered courses that focused on the historical and contemporary experiences of Blacks in America and across the African diaspora. Using a qualitative approach, the authors investigated the perceptions of how Black Studies courses shaped the psychosocial experiences and identity…

Engineering students and their entrepreneurial intentions

Directory of Open Access Journals (Sweden)

Filipa Dionísio Vieira

2014-02-01

Full Text Available Promoting entrepreneurship is a key opportunity in the current environment, and engineering have recognized this criticism by including in their curricula basic financial disciplines. Given the current economic situation, provide the future engineer with concepts and techniques to move from knowledge to action, can improve the value perception of entrepreneurship as an alternative to employability on behalf of others. The aim of this paper is to present the preliminary results of the ENGEmpreende survey developed to measure the perceived attitudes and values of entrepreneurship by engineering students. Our sample involves 387 students of engineering courses from University of Minho. Portuguese engineering students report good levels of thoughts about entrepreneurship. Our study also found that their entrepreneurship predisposition has dependency relationships with gender, thoughts about entrepreneurship and entrepreneurial activities. The results of the perceived image of the entrepreneur suggest that students recognize the positive image of the entrepreneur in society, but have doubts about what is best: entrepreneur or employee in a large company? As perceived barriers, engineering students perceive as difficult to find a business idea or access to bank loans. Students’ perceived skills and competence suggest a perceived high adaptability, perseverance, technical confidence and orientation to results. The results of ENGEmpreende survey give an additional contribution to the theme of engineering entrepreneurship intentions through the identification of entrepreneurship predisposition, attitude to self-employment, entrepreneurial image, barriers to entrepreneurship, risk perception and technical confidence.

Improving retention and graduation rates for black students in nursing education: a developmental model.

Science.gov (United States)

Jones, S H

1992-01-01

High attrition rates among black students are a significant factor in the decline in graduation rates from nursing programs. Nursing education needs a program to address problems of anger, frustration, and loneliness and to develop the black student as a whole person.

Shaking up Pre-Calculus: Incorporating Engineering into K-12 Curricula

Science.gov (United States)

Sabo, Chelsea; Burrows, Andrea; Childers, Lois

2014-01-01

Projects highlighting Science, Technology, Engineering, and Mathematics (STEM) education in high schools have promoted student interest in engineering-related fields and enhanced student understanding of mathematics and science concepts. The Science and Technology Enhancement Program (Project STEP), funded by a NSF GK-12 grant at the University of…

University Experiences and Women Engineering Student Persistence

Science.gov (United States)

Ayers, LoAnn Debra Gienger

Riverside University (a pseudonym), like many universities, has not significantly increased the number of women who graduate with bachelor's degrees in engineering. The purpose of the study is to understand how the university experiences of women students influence the decision to persist in an undergraduate engineering degree and to understand the role of self-perception in how the students perceive experiences as supporting or hindering their persistence in the major. Archival data, documents and artifacts, observations, individual interviews, and a focus group with women engineering students provide insights into students' perceived barriers and supports of student success. Analysis of the data results in two major themes. First, students' self-confidence and self-efficacy influence how women assimilate university experiences as either supportive or diminishing of academic success. Second, university policies and practices shape the campus environment within which student experiences are formed and influence a student's level of institutional, academic, and social integration. The results of the study indicate opportunities for university leadership to enhance strategies that positively shape students' institutional, academic and social integration as precursors toward increasing the number of women students who successfully complete undergraduate engineering degrees at Riverside University. Future research is indicated to better understand how gender and gender identity intersects with other demographic factors, such as socio-economic status, immigration status, and life stage (e.g., traditional versus non-traditional students), to support or deter the persistence of engineering students to degree completion.

Engineering Students' Sustainability Approaches

Science.gov (United States)

Haase, S.

2014-01-01

Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The…

The use of engineering design scenarios to assess student knowledge of global, societal, economic, and environmental contexts

Science.gov (United States)

McKenna, Ann F.; Hynes, Morgan M.; Johnson, Amy M.; Carberry, Adam R.

2016-07-01

Product archaeology as an educational approach asks engineering students to consider and explore the broader societal and global impacts of a product's manufacturing, distribution, use, and disposal on people, economics, and the environment. This study examined the impact of product archaeology in a project-based engineering design course on student attitudes and perceptions about engineering and abilities to extend and refine knowledge about broader contexts. Two design scenarios were created: one related to dental hygiene and one related to vaccination delivery. Design scenarios were used to (1) assess knowledge of broader contexts, and (2) test variability of student responses across different contextual situations. Results from pre- to post-surveying revealed improved student perceptions of knowledge of broader contexts. Significant differences were observed between the two design scenarios. The findings support the assumption that different design scenarios elicit consideration of different contexts and design scenarios can be constructed to target specific contextual considerations.

Current Students | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Admissions - Undergraduate Students | College of Engineering & Applied

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Student Organizations | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Transfer Students | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Pre-Service Teachers’ Responses to Student Behavior in a Mixed-Reality Environment

Directory of Open Access Journals (Sweden)

Jillian Black

2016-02-01

Full Text Available This study examined whether student gender and the type of student misbehavior affected the classroom management techniques of pre-service teachers. Participants were pre-service teachers who interacted with avatar students controlled by an actor in a mixed-reality environment. Avatar students’ behaviors were systematically coded along with their gender. Pre-service teachers’ responses were organized into four categories: coercion, retreatism, normative, and remunerative. Pre-service teachers’ use of proximity and tone of voice were also recorded. Data were analyzed using chi-square and ANOVA tests. Significant differences in pre-service teacher responses were found for type of avatar student misbehavior but not avatar student gender. Results and implications for future research are discussed.

USSTRIDE program is associated with competitive Black and Latino student applicants to medical school

Directory of Open Access Journals (Sweden)

Kendall M. Campbell

2014-05-01

Full Text Available Purpose: We compared MCAT scores, grade point averages (GPAs, and medical school acceptance rates of Black and Latino students in an outreach program called Undergraduate Science Students Together Reaching Instructional Diversity and Excellence (USSTRIDE to non-USSTRIDE students. We hypothesized that Black and Latino participants in USSTRIDE had higher acceptance rates to medical school, higher MCAT scores, and college GPAs when compared to other Black and Latino medical school applicants from our institution. Methods: The academic performance (GPAs and MCAT scores and acceptance and matriculation rate data on all Black and Latino Florida State University applicants to any medical school from 2008 to 2012 were collected from the AIS/AMCAS database and separated into two comparison groups (USSTRIDE vs. Non-USSTRIDE. Independent sample T-tests and chi-square analysis, Cohen's D test, and odds ratios were determined. Results: Average science GPA was 3.47 for USSTRIDE students (n=55 and 3.45 for non-USSTRIDE students (n=137, p=0.68, d=0.0652. Average cumulative GPA was 3.57 for USSTRIDE students and 3.54 for non-USSTRIDE students (p=0.45, d=0.121. Average MCAT score was 23 for USSTRIDE students and 25 for non-USSTRIDE students (p=0.02, d=0.378. Twenty-three percent of accepted USSTRIDE students and 29% of accepted non-USSTRIDE students had multiple acceptances (p=0.483, OR 1.38, 95% CI 0.52–3.88. Forty-nine percent of non-USSTRIDE students and 75% of USSTRIDE students matriculated in medical school (p=0.001, OR 3.13 95% CI 1.51–6.74. About 78.6% of USSTRIDE students matriculated at FSU's medical school compared to 36.2% of non-USSTRIDE students (p<0.01. Conclusions: USSTRIDE and non-USSTRIDE students had similar science and cumulative GPAs. USSTRIDE students' MCAT scores were lower but acceptance rates to medical school were higher. Participation in USSTRIDE is associated with increased acceptance rates for Black and Latino students to our

Perceptions of Engineering students, lecturers and academic ...

African Journals Online (AJOL)

Perceptions of Engineering students, lecturers and academic development practitioners about academic development classes at a university of technology. ... development, engineering education, scaffolding, self-regulated learning, students ...

Black African Immigrant College Students' Perceptions of Belonging at a Predominately White Institution

Science.gov (United States)

Stebleton, Michael J.; Aleixo, Marina B.

2016-01-01

A growing number of college-age Blacks in the United States are Black African immigrants. Using a constructivist grounded theory approach, the researchers interviewed 12 undergraduate Black African immigrant college students attending a predominately White institution (PWI) about their experiences and perceptions of belonging. Findings suggest…

USSTRIDE program is associated with competitive Black and Latino student applicants to medical school.

Science.gov (United States)

Campbell, Kendall M; Berne-Anderson, Thesla; Wang, Aihua; Dormeus, Guy; Rodríguez, José E

2014-01-01

We compared MCAT scores, grade point averages (GPAs), and medical school acceptance rates of Black and Latino students in an outreach program called Undergraduate Science Students Together Reaching Instructional Diversity and Excellence (USSTRIDE) to non-USSTRIDE students. We hypothesized that Black and Latino participants in USSTRIDE had higher acceptance rates to medical school, higher MCAT scores, and college GPAs when compared to other Black and Latino medical school applicants from our institution. The academic performance (GPAs and MCAT scores) and acceptance and matriculation rate data on all Black and Latino Florida State University applicants to any medical school from 2008 to 2012 were collected from the AIS/AMCAS database and separated into two comparison groups (USSTRIDE vs. Non-USSTRIDE). Independent sample T-tests and chi-square analysis, Cohen's D test, and odds ratios were determined. Average science GPA was 3.47 for USSTRIDE students (n=55) and 3.45 for non-USSTRIDE students (n=137, p=0.68, d=0.0652). Average cumulative GPA was 3.57 for USSTRIDE students and 3.54 for non-USSTRIDE students (p=0.45, d=0.121). Average MCAT score was 23 for USSTRIDE students and 25 for non-USSTRIDE students (p=0.02, d=0.378). Twenty-three percent of accepted USSTRIDE students and 29% of accepted non-USSTRIDE students had multiple acceptances (p=0.483, OR 1.38, 95% CI 0.52-3.88). Forty-nine percent of non-USSTRIDE students and 75% of USSTRIDE students matriculated in medical school (p=0.001, OR 3.13 95% CI 1.51-6.74). About 78.6% of USSTRIDE students matriculated at FSU's medical school compared to 36.2% of non-USSTRIDE students (pLatino students to our medical school. This finding is true for other medical schools as USSTRIDE students are as likely as non-USSTRIDE students to have multiple acceptances.

Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

Science.gov (United States)

Tang, Xiaofeng

Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

Inequality in Black and White High School Students' Perceptions of School Support: An Examination of Race in Context.

Science.gov (United States)

Bottiani, Jessika H; Bradshaw, Catherine P; Mendelson, Tamar

2016-06-01

Supportive relationships with adults at school are critical to student engagement in adolescence. Additional research is needed to understand how students' racial backgrounds interact with the school context to shape their perceptions of school support. This study employed multilevel, latent variable methods with a sample of Black and White students (N = 19,726, 35.8 % Black, 49.9 % male, mean age = 15.9) in 58 high schools to explore variation in perceived caring, equity, and high expectations by student race, school diversity, and socioeconomic context. The results indicated that Black students perceived less caring and equity relative to White students overall, and that equity and high expectations were lower in diverse schools for both Black and White students. Nonetheless, racial disparities were attenuated in more diverse schools. The findings point to the need for intervention to improve perceptions of school support for Black youth and for all students in lower income and more diverse schools.

Teaching ethics to engineers: ethical decision making parallels the engineering design process.

Science.gov (United States)

Bero, Bridget; Kuhlman, Alana

2011-09-01

In order to fulfill ABET requirements, Northern Arizona University's Civil and Environmental engineering programs incorporate professional ethics in several of its engineering courses. This paper discusses an ethics module in a 3rd year engineering design course that focuses on the design process and technical writing. Engineering students early in their student careers generally possess good black/white critical thinking skills on technical issues. Engineering design is the first time students are exposed to "grey" or multiple possible solution technical problems. To identify and solve these problems, the engineering design process is used. Ethical problems are also "grey" problems and present similar challenges to students. Students need a practical tool for solving these ethical problems. The step-wise engineering design process was used as a model to demonstrate a similar process for ethical situations. The ethical decision making process of Martin and Schinzinger was adapted for parallelism to the design process and presented to students as a step-wise technique for identification of the pertinent ethical issues, relevant moral theories, possible outcomes and a final decision. Students had greatest difficulty identifying the broader, global issues presented in an ethical situation, but by the end of the module, were better able to not only identify the broader issues, but also to more comprehensively assess specific issues, generate solutions and a desired response to the issue.

Vignettes of scholars: A case study of black male students at a STEM early college high school

Science.gov (United States)

Adams, Tempestt Richardson

Ensuring students graduate high school ready to enter college or the workforce has become a prime focus within secondary education. High school graduates are often ill-prepared for college-level work and often have to register for remedial courses before they can take standard college level courses (Southern Regional Education Board, 2010). Serving as both a solution to this concern and an alternative to traditional high schools, early college high schools were created to focus on increasing the number of students graduating from high school and enrolling in college. Early college high schools seek to serve students who have traditionally underperformed in school and those who are underrepresented in higher education including students of color, first-generation college students, students from low socioeconomic backgrounds, and English language learners (Barnett, Bucceri, Hindo, Kim, 2013; "Overview & FAQS," 2013). In efforts to learn more about how early colleges are meeting the needs of students, this dissertation examines the experiences, identity construction, and perceptions of Black male students at a science, technology, engineering, and mathematics (STEM) based early college high school. Using a qualitative case study design, participants were eight Black male upperclassmen enrolled in a STEM early college high school, located on the campus of a four-year university. Data was collected through focus groups and individual interviews and data was analyzed thematically. Findings suggest students in this study have largely positive experiences at their early college high school. Despite some challenges, the early college high school environment helps facilitate scholar identities, and the STEM focus of the school helps students learn more about their strengths and weaknesses. The implications of the research, recommendations for educational stakeholders, and recommendations for future research are discussed.

Modeling Environmental Literacy of Malaysian Pre-University Students

Science.gov (United States)

Shamuganathan, Sheila; Karpudewan, Mageswary

2015-01-01

In this study attempt was made to model the environmental literacy of Malaysian pre-university students enrolled in a matriculation college. Students enrolled in the matriculation colleges in Malaysia are the top notch students in the country. Environmental literacy of this group is perceived important because in the future these students will be…

Improving the Climate for LGBTQ Students at an Historically Black University

Science.gov (United States)

Lewis, Marilyn W.; Ericksen, Kirsten S.

2016-01-01

African American lesbian, gay, bisexual, transgender, and queer (LGBTQ) students attending an Historically Black College or University (HBCU) may experience bullying. Using snowball sampling, the authors recruited six LGBTQ students for a focus group to learn how they perceived their HBCU campus atmosphere toward LGBTQ students. Thirty faculty…

Software Engineering Frameworks: Textbooks vs. Student Perceptions

Science.gov (United States)

McMaster, Kirby; Hadfield, Steven; Wolthuis, Stuart; Sambasivam, Samuel

2012-01-01

This research examines the frameworks used by Computer Science and Information Systems students at the conclusion of their first semester of study of Software Engineering. A questionnaire listing 64 Software Engineering concepts was given to students upon completion of their first Software Engineering course. This survey was given to samples of…

First-year engineering students' views of the nature of engineering: implications for engineering programmes

Science.gov (United States)

Karataş, F. Ö.; Bodner, G. M.; Unal, Suat

2016-01-01

A study was conducted on the views of the nature of engineering held by 114 first-year engineering majors; the study built on prior work on views of the nature of science held by students, their instructors, and the general public. Open-coding analysis of responses to a 12-item questionnaire suggested that the participants held tacit beliefs that engineering (1) involves problem solving; (2) is a form of applied science; (3) involves the design of artefacts or systems; (4) is subject to various constraints; and (5) requires teamwork. These beliefs, however, were often unsophisticated, and significant aspects of the field of engineering as described in the literature on engineering practices were missing from the student responses. The results of this study are important because students' beliefs have a strong influence on what they value in a classroom situation, what they attend to in class, and how they choose to study for a course.

Grouped to Achieve: Are There Benefits to Assigning Students to Heterogeneous Cooperative Learning Groups Based on Pre-Test Scores?

Science.gov (United States)

Werth, Arman Karl

Cooperative learning has been one of the most widely used instructional practices around the world since the early 1980's. Small learning groups have been in existence since the beginning of the human race. These groups have grown in their variance and complexity overtime. Classrooms are getting more diverse every year and instructors need a way to take advantage of this diversity to improve learning. The purpose of this study was to see if heterogeneous cooperative learning groups based on student achievement can be used as a differentiated instructional strategy to increase students' ability to demonstrate knowledge of science concepts and ability to do engineering design. This study includes two different groups made up of two different middle school science classrooms of 25-30 students. These students were given an engineering design problem to solve within cooperative learning groups. One class was put into heterogeneous cooperative learning groups based on student's pre-test scores. The other class was grouped based on random assignment. The study measured the difference between each class's pre-post gains, student's responses to a group interaction form and interview questions addressing their perceptions of the makeup of their groups. The findings of the study were that there was no significant difference between learning gains for the treatment and comparison groups. There was a significant difference between the treatment and comparison groups in student perceptions of their group's ability to stay on task and manage their time efficiently. Both the comparison and treatment groups had a positive perception of the composition of their cooperative learning groups.

Overweight and Physical Inactivity Among African American Students at a Historically Black University.

Science.gov (United States)

Sa, Jaesin; Heimdal, James; Sbrocco, Tracy; Seo, Dong-Chul; Nelson, Beatrice

2016-02-01

Little is known about correlates of overweight, obesity, and physical inactivity among African American students at historically Black colleges and universities. To assess overweight, obesity, and physical inactivity among African American college students at a historically Black university in Maryland in the USA. Data were collected from 268 African American college students in 2013. Data were analyzed with percentage difference z-tests, chi-square tests, and multiple logistic regression. Cross-sectional survey (student response rate = 49.9%). The overweight/obesity rate of participants was 47.5%, which was higher than that of the U.S. college student population overall (34.1%) and a representative sample of African American college students (38.3%). When age and sex were controlled, a family history of obesity, skipping breakfast, drinking caffeinated drinks, lower family income, and smoking a pipe, cigars, or cigarettes daily were significant correlates of overweight (obesity included). The percentage of physical inactivity was 68.3, and physical inactivity was higher among women and overweight or obese students. Given the high overweight and obesity prevalence among African American college students, historically Black colleges and universities in the USA should increase health promotion efforts targeting weight-related behaviors, particularly physical activity. Copyright © 2016. Published by Elsevier Inc.

Black generation Y students' perceptions of national sport celebrity ...

African Journals Online (AJOL)

African Journal for Physical Activity and Health Sciences ... Black generation Y students' perceptions of national sport celebrity endorsers as role models ... at tertiary institutions constitute a particularly attractive target market to marketers given ...

Predicting stress in pre-registration nursing students.

Science.gov (United States)

Pryjmachuk, Steven; Richards, David A

2007-02-01

To determine which variables from a pool of potential predictors predict General Health Questionnaire 'caseness' in pre-registration nursing students. Cross-sectional survey, utilizing self-report measures of sources of stress, stress (psychological distress) and coping, together with pertinent demographic measures such as sex, ethnicity, educational programme and nursing specialty being pursued, and age, social class and highest qualifications on entry to the programme. Questionnaire packs were distributed to all pre-registration nursing students (N=1,362) in a large English university. Completed packs were coded, entered into statistical software and subjected to a series of logistic regression analyses. Of the questionnaire packs 1,005 (74%) were returned, of which up to 973 were available for the regression analyses undertaken. Four logistic regression models were considered and, on the principle of parsimony, a single model was chosen for discussion. This model suggested that the key predictors of caseness in the population studied were self-report of pressure, whether or not respondents had children (specifically, whether these children were pre-school or school-age), scores on a 'personal problems' scale and the type of coping employed. The overall caseness rate among the population was around one-third. Since self-report and personal, rather than academic, concerns predict stress, personal teachers need to play a key role in supporting students through 'active listening', especially when students self-report high levels of stress and where personal/social problems are evident. The work-life balance of students, especially those with child-care responsibilities, should be a central tenet in curriculum design in nurse education (and, indeed, the education of other professional and occupational groups). There may be some benefit in offering stress management (coping skills) training to nursing students and, indeed, students of other disciplines.

Rising Tide II: Do Black Students Benefit as Grad Rates Increase?

Science.gov (United States)

Nichols, Andrew Howard; Eberle-Sudré, Kimberlee; Welch, Meredith

2016-01-01

"Rising Tide II: Do Black Students Benefit as Grad Rates Increase?" looks at a decade of graduation rates for African American students at four-year, public institutions that improved student success during the past decade. It shows that while a majority (almost 70 percent) of institutions we examined improved graduation rates for black…

Educating the engineers of 2020: An outcomes-based typology of engineering undergraduates

Science.gov (United States)

Knight, David B.

Members of government and industry have called for greater emphasis within U.S. colleges and universities on producing engineers who can enter and advance a more competitive, globally connected workforce. Looking toward this future, engineers will need to exhibit strong analytical skills as in the past, but they also will need to be proficient in a cadre of new abilities to compete. This study examines, in combination, an array of knowledge and skills aligned with the National Academy of Engineering's "engineer of 2020." The study has two major goals. The first is to develop a typology of engineering students based on the learning outcomes associated with the engineer of E2020. The second is to understand the educational experiences that distinguish these groups of students who resemble, more or less, the engineer of 2020. This approach acknowledges that engineering graduates need a complex skill set to succeed in the new global economy; it is the combination of skills associated with the engineer of 2020, not the individual skills in isolation, which will ensure graduates can respond to workforce needs of the future. To date, research on student outcomes has studied learning outcomes independent of one another rather than investigating student learning holistically. The study uses student data from the Prototype to production: Processes and conditions for preparing the Engineer of 2020 study, sponsored by the National Science Foundation (NSF EEC-0550608). Engineering students from a nationally representative sample of engineering programs in the United States answered a survey that collected information on their pre-college academic preparation and sociodemographic characteristics, their curricular and co-curricular experiences in their engineering programs, and their self-ratings of their engineering-related competencies. Only data on engineering students in their senior year (n=2,422) were utilized in analyses. Analyses were conducted in multiple phases for each

Key Concepts for and Assessment of an Undergraduate Class that Engages Engineering Students in Climate Change Grand Challenge

Science.gov (United States)

Powers, S. E.; DeWaters, J.; Dhaniyala, S.

2015-12-01

Engineers must take a leading role in addressing the challenges of mitigating climate change and adapting to the inevitable changes that our world is facing. Yet climate change classes targeting engineering students are scarce. Technical education must focus on the problem formulation and solutions that consider multiple, complex interactions between engineered systems and the Earth's climate system and recognize that transformation raises societal challenges, including trade-offs among benefits, costs, and risks. Moreover, improving engineering students' climate science literacy will require strategies that also inspire students' motivation to work toward their solution. A climate science course for engineers has been taught 5 semesters as part of a NASA Innovations in Climate Education program grant (NNXlOAB57A). The basic premise of this project was that effective instruction must incorporate scientifically-based knowledge and observations and foster critical thinking, problem solving, and decision-making skills. Lecture, in-class cooperative and computer-based learning and a semester project provide the basis for engaging students in evaluating effective mitigation and adaptation solutions. Policy and social issues are integrated throughout many of the units. The objective of this presentation is to highlight the content and pedagogical approach used in this class that helped to contribute to significant gains in engineering students' climate literacy and critical thinking competencies. A total of 89 students fully participated in a pre/post climate literacy questionnaire. As a whole, students demonstrated significant gains in climate-related content knowledge (pproblem statements and solutions in a manner that incorporated a multidimensional systems perspective. These skills are sometimes foreign to technically focused, number crunching engineering students, but are critical for using their engineering skills and profession to address climate change mitigation

Mathematics for engineering

CERN Document Server

Bolton, W

2012-01-01

Mathematics for Engineering has been carefully designed to provide a maths course for a wide ability range, and does not go beyond the requirements of Advanced GNVQ. It is an ideal text for any pre-degree engineering course where students require revision of the basics and plenty of practice work. Bill Bolton introduces the key concepts through examples set firmly in engineering contexts, which students will find relevant and motivating. The second edition has been carefully matched to the Curriculum 2000 Advanced GNVQ units:

Health risk behaviors of black male college students: seat belt use, smoking, and obesity status.

Science.gov (United States)

Ajibade, Phoebe Butler

2010-01-01

This paper examined health behaviors (seatbelt use, tobacco use, and obesity status) of 127 black male college students using data obtained from the National College Health Risk Behavior Survey. The majority of the participants were freshmen and sophomores (70%), full time students (95%), and lived on campus (85%). The results indicated that black males often failed to use seatbelts while riding as a passenger (69%) or driving (48%). Although 15% of the students smoked, 1/3 of the smokers began smoking during college. Approximately 50% of the students were overweight or obese; among students attempting to lose weight, exercise versus nutrient intake was used as a means to lose weight. The study recommendations included the need to increase educational efforts to alert black males to their risks for a premature death, and to provide programming/mentoring initiatives to assist males in dealing with stress and discrimination that may impact their health-related decision making. The implications of this study suggest that even educated black males are at risk for premature disease and disability as a result of their health behaviors.

EXPLORING THE PROBLEMS FACED BY TECHNICAL SCHOOL STUDENTS IN LEARNING ENGINEERING COURSES

Directory of Open Access Journals (Sweden)

RAMLEE MUSTAPHA

2014-12-01

Full Text Available The teaching of engineering courses is relatively challenging due to the nature of the courses that are perceived as “difficult courses” by a number of students. Thus, the purpose of this action research was to explore the problems faced by electrical and electronic engineering (PKEE students studying a difficult topic–transistor. This research was also aimed at identifying the students’ attitude towards Problem-based Learning (PBL. Literature has shown that PBL could enhance students’ understanding and make the learning more meaningful. The theoretical framework of this study was based on Kemmis and Mc Taggart model. Cooperative learning method was also utilised in this study consisted of Jigsaw technique in the first and second rounds of the study. In the final round, the discussion method was used. In an action research design, a classroom is a usual research site. Thus, an engineering class of 30 Form 5 students in a Technical School was selected. The PBL method was applied in the class for a nine-week duration. Empirical data were gathered from peer assessment, observation, and pre- and post-tests. The data were described descriptively using frequency, mean and standard deviation. The main results show that the students were more interactive and their post-test result shows significant increases. In terms of the attitude towards PBL, the participants rated PBL highly. The participants also assert that the main benefits of PBL include enhancing their collaborative and problem-solving skills.

Morphology and Optical Properties of Black-Carbon Particles Relevant to Engine Emissions

Science.gov (United States)

Michelsen, H. A.; Bambha, R.; Dansson, M. A.; Schrader, P. E.

2013-12-01

Black-carbon particles are believed to have a large influence on climate through direct radiative forcing, reduction of surface albedo of snow and ice in the cryosphere, and interaction with clouds. The optical properties and morphology of atmospheric particles containing black carbon are uncertain, and characterization of black carbon resulting from engines emissions is needed. Refractory black-carbon particles found in the atmosphere are often coated with unburned fuel, sulfuric acid, water, ash, and other combustion by-products and atmospheric constituents. Coatings can alter the optical and physical properties of the particles and therefore change their optical properties and cloud interactions. Details of particle morphology and coating state can also have important effects on the interpretation of optical diagnostics. A more complete understanding of how coatings affect extinction, absorption, and incandescence measurements is needed before these techniques can be applied reliably to a wide range of particles. We have investigated the effects of coatings on the optical and physical properties of combustion-generated black-carbon particles using a range of standard particle diagnostics, extinction, and time-resolved laser-induced incandescence (LII) measurements. Particles were generated in a co-flow diffusion flame, extracted, cooled, and coated with oleic acid. The diffusion flame produces highly dendritic soot aggregates with similar properties to those produced in diesel engines, diffusion flames, and most natural combustion processes. A thermodenuder was used to remove the coating. A scanning mobility particle sizer (SMPS) was used to monitor aggregate sizes; a centrifugal particle mass analyzer (CPMA) was used to measure coating mass fractions, and transmission electron microscopy (TEM) was used to characterize particle morphologies. The results demonstrate important differences in optical measurements between coated and uncoated particles.

The impact of project-based learning on improving student learning outcomes of sustainability concepts in transportation engineering courses

Science.gov (United States)

Fini, Elham H.; Awadallah, Faisal; Parast, Mahour M.; Abu-Lebdeh, Taher

2018-05-01

This paper describes an intervention to enhance students' learning by involving students in brainstorming activities about sustainability concepts and their implications in transportation engineering. The paper discusses the process of incorporating the intervention into a transportation course, as well as the impact of this intervention on students' learning outcomes. To evaluate and compare students' learning as a result of the intervention, the Laboratory for Innovative Technology and Engineering Education survey instrument was used. The survey instrument includes five constructs: higher-order cognitive skills, self-efficacy, ease of learning subject matter, teamwork, and communication skills. Pre- and post-intervention surveys of student learning outcomes were conducted to determine the effectiveness of the intervention on enhancing students' learning outcomes. The results show that the implementation of the intervention significantly improved higher-order cognitive skills, self-efficacy, teamwork, and communication skills. Involving students in brainstorming activities related to sustainability concepts and their implications in transportation proved to be an effective teaching and learning strategy.

The status and challenges of Industrial Engineering in South Africa

Directory of Open Access Journals (Sweden)

Schutte, Cornelius S. L.

2016-05-01

Full Text Available The industrial engineering discipline in South Africa is examined by introducing the context of the discipline and by revisiting its history. The drivers influencing the context and future of industrial engineering in South Africa are also considered, and the discipline is analysed in terms of the following aspects: university qualifications, employment in industry sectors, race and gender profiles, use and competence in industry, and income profiles. The analysis is based on a recent survey sent to practising industrial engineers, on membership data from the Southern African Institute for Industrial Engineering (SAIIE, and on two internal SAIIE investigations. The study concludes that the success of transformation, particularly in terms of race, has been limited. The results also indicate that there are an almost equal number of black and white industrial engineers, yet the majority of black industrial engineers have technical qualifications, while the majority of white industrial engineers have academic qualifications. The results indicate that this limits the use of black industrial engineers in industry and, consequently, the success of their careers. This in turn means that there are fewer black role models to attract young black students to the discipline. Some preliminary opportunities to unlock the increased transformation of the profession are identified.

Admissions - Graduate Students | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Undergraduate Engineers and Teachers: Can Students Be Both?

OpenAIRE

Zarske, Malinda S; Vadeen, Maia L; Tsai, Janet Y; Sullivan, Jacquelyn F; Carlson, Denise W

2017-01-01

Today’s college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of engineering undergraduate students at the University of Colorado Boulder in November 2012 indicated a desire by students to simultaneously pursue secondary ...

Introducing systems engineering to industrial design engineering students with hands-on experience

NARCIS (Netherlands)

Bonnema, Gerrit Maarten; Lutters-Weustink, Ilanit F.; van Houten, Frederikus J.A.M.; Selvaraj, H.; Muthukumar, V.

2005-01-01

The article presents an innovative educational project to introduce systems engineering to third year students in industrial design engineering at the University of Twente. In a short period the students are confronted with new technology, namely sensors and actuators. They have to apply this

Student science enrichment training program. Progress report, June 1, 1991--May 31, 1992

Energy Technology Data Exchange (ETDEWEB)

Sandhu, S.S.

1992-04-21

Historically Black Colleges and Universities wing of the United States Department of Energy (DOE) provided funds to Claflin College, Orangeburg, S.C. To conduct a student Science Enrichment Training Program for a period of six weeks during 1991 summer. Thirty participants were selected from a pool of applicants, generated by the High School Seniors and Juniors and the Freshmen class of 1990-1991 at Claflin College. The program primarily focused on high ability students, with potential for Science, Mathematics and Engineering Careers. The major objectives of the program were W to increase the pool of well qualified college entering minority students who will elect to go in Physical Sciences and Engineering and (II) to increase the enrollment in Chemistry and Preprofessional-Pre-Med, Pre-Dent, etc.-majors at Claflin College by including the Claflin students to participate in summer academic program. The summer academic program consisted of Chemistry and Computer Science training. The program placed emphasis upon laboratory experience and research. Visits to Scientific and Industrial laboratories were arranged. Guest speakers which were drawn from academia, industry and several federal agencies, addressed the participants on the future role of Science in the industrial growth of United States of America. The guest speakers also acted as role models for the participants. Several videos and films, emphasizing the role of Science in human life, were also screened.

An Exploratory Survey of Student Perspectives Regarding Search Engines

Science.gov (United States)

Alshare, Khaled; Miller, Don; Wenger, James

2005-01-01

This study explored college students' perceptions regarding their use of search engines. The main objective was to determine how frequently students used various search engines, whether advanced search features were used, and how many search engines were used. Various factors that might influence student responses were examined. Results showed…

Biomedical and Biochemical Engineering for K-12 Students

Science.gov (United States)

Madihally, Sundararajan V.; Maase, Eric L.

2006-01-01

REACH (Reaching Engineering and Architectural Career Heights) is a weeklong summer academy outreach program for high school students interested in engineering, architecture, or technology. Through module-­based instruction, students are introduced to various engineering fields. This report describes one of the modules focused on introducing…

Role of Pre-Course Student Characteristics on Student Learning in Interactive Teaching Environments

Science.gov (United States)

Miller, Kelly Anne

The goal of this dissertation is to broaden our understanding of interactive teaching strategies, in the context of the introductory physics classroom at the undergraduate level. The dissertation is divided into four main projects, each of which investigates a specific aspect of teaching physics interactively. All four projects look towards improving the effectiveness of interactive teaching by understanding how pre-course student characteristics affect the way students learn interactively. We first discuss lecture demonstrations in the context of an interactive classroom using Peer Instruction. We study the role of predictions in conceptual learning. We examine how students' predictions affect what they report having seen during a demonstration. We also examine how student predictions affect what they recall as the outcome of the demonstration at the end of the semester. We then analyze student response patterns to conceptual questions posed during Peer Instruction. We look at the relationship between a student's tendency to switch their answer and pre-course student characteristics like science self-efficacy. Next we elucidate response timing to conceptual questions posed over the course of the semester, in two introductory physics classes taught using Peer Instruction. We look at the relationship between student response times and student characteristics like pre-course physics knowledge, science self-efficacy and gender. We study response times as a way of gaining insight into students thinking in Peer Instruction environments as well as to improve the implementation of Peer Instruction. Finally, we present work on the role of NB, an online collaborative textbook annotation tool, in a flipped, project based, physics class. We analyze the relationship between students' level of online engagement and traditional learning metrics to understand the effectiveness of NB in the context of flipped classrooms. We also report the results of experiments conducted to

An HBCU-Based Educational Approach for Black College Student Success: Toward a Framework with Implications for All Institutions

Science.gov (United States)

Arroyo, Andrew T.; Gasman, Marybeth

2014-01-01

This conceptual study builds an institution-focused, non-Eurocentric, theoretical framework of black college student success. Specifically, the study synthesizes the relevant empirical research on the contributions historically black colleges and universities (HBCUs) have made for black student success, leading to an original model that all…

High School Student Modeling in the Engineering Design Process

Science.gov (United States)

Mentzer, Nathan; Huffman, Tanner; Thayer, Hilde

2014-01-01

A diverse group of 20 high school students from four states in the US were individually provided with an engineering design challenge. Students chosen were in capstone engineering courses and had taken multiple engineering courses. As students considered the problem and developed a solution, observational data were recorded and artifacts…

Empowering Engineering Students through Employability Skills

Directory of Open Access Journals (Sweden)

Urvashi Kaushal

2016-12-01

Full Text Available A professional course like engineering strives to get maximum number of its students placed through campus interviews. While communication skills have been added in all the engineering courses with the aim to improve their performance in placement, the syllabus mostly concentrates on the development of four language skills. The students are not made aware of the employability skills and their significance. the increasing competition makes it imperative that apart from a regular degree certain skills are required by engineers. Industries while advertising for various posts even mention essential skills required along with the essential qualification. However skills and the significance of skills while applying for jobs or while facing interviews is a topic which is rarely given consideration while preparing for job interviews or while entering the job market. This paper intends to enlist the importance of skills and why students need to be aware of the skills they possess and how they can work on packaging their candidature around a few skills.  Different profession requires different skills and if students identify their skills or acquire certain skills they can unquestionably have an added advantage in the interview and placement. Hence, this paper intends to enlist the skills, the importance of skills, ways to create awareness of individual skills specifically in engineering students who will step into the industry in near future.

Comparison of cross culture engineering ethics training using the simulator for engineering ethics education.

Science.gov (United States)

Chung, Christopher

2015-04-01

This paper describes the use and analysis of the Simulator for Engineering Ethics Education (SEEE) to perform cross culture engineering ethics training and analysis. Details describing the first generation and second generation development of the SEEE are published in Chung and Alfred, Science and Engineering Ethics, vol. 15, 2009 and Alfred and Chung, Science and Engineering Ethics, vol. 18, 2012. In this effort, a group of far eastern educated students operated the simulator in the instructional, training, scenario, and evaluation modes. The pre and post treatment performance of these students were compared to U.S. Educated students. Analysis of the performance indicated that the far eastern educated student increased their level of knowledge 23.7 percent while U.S. educated students increased their level of knowledge by 39.3 percent.

Pre-clinical medical student experience in a pediatric pulmonary clinic

Directory of Open Access Journals (Sweden)

Thomas G. Saba

2015-11-01

Full Text Available Objective: Our objective was to evaluate the educational value of introducing pre-clinical medical students to pediatric patients and their families in a subspecialty clinic setting. Methods: First- and second-year medical students at the University of Michigan seeking clinical experience outside of the classroom attended an outpatient pediatric pulmonary clinic. Evaluation of the experience consisted of pre- and post-clinic student surveys and post-clinic parent surveys with statements employing a four-point Likert scale as well as open-ended questions. Results: Twenty-eight first-year students, 6 second-year students, and 33 parents participated in the study. Post-clinic statement scores significantly increased for statements addressing empathic attitudes, confidence communicating with children and families, comfort in the clinical environment, and social awareness. Scores did not change for statements addressing motivation, a sense of team membership, or confidence with career goals. Students achieved their goals of gaining experience interacting with patients, learning about pulmonary diseases, and observing clinic workflow. Parents felt that they contributed to student education and were not inconvenienced. Conclusions: Students identified several educational benefits of exposure to a single pediatric pulmonary clinic. Patients and families were not inconvenienced by the participation of a student. Additional studies are warranted to further investigate the value of this model of pre-clinical medical student exposure to subspecialty pediatrics.

A case study of non-traditional students re-entry into college physics and engineering

Science.gov (United States)

Langton, Stewart Gordon

Two groups of students in introductory physics courses of an Access Program for engineering technologies were the subjects of this study. Students with a wide range of academic histories and abilities were enrolled in the program; many of the students were re-entry and academically unprepared for post-secondary education. Five years of historical data were evaluated to use as a benchmark for revised instruction. Data were gathered to describe the pre-course academic state of the students and their academic progress during two physics courses. Additional information was used to search for factors that might constrain academic success and as feedback for the instructional methods. The data were interpreted to regulate constructivist design features for the physics courses. The Engineering Technology Access Program was introduced to meet the demand from non-traditional students for admission to two-year engineering' technology programs, but who did not meet normal academic requirements. The duration of the Access Program was two terms for electronic and computer engineering students and three terms for civil and mechanical engineering students. The sequence of mathematics and physics courses was different for the two groups. The Civil/Mechanical students enrolled in their first mathematics course before undertaking their first physics course. The first mathematics and physics courses for the Electronics students were concurrent. Academic success in the two groups was affected by this difference. Over a five-year period the success rate of students graduating with a technology diploma was approximately twenty-five percent. Results from this study indicate that it was possible to reduce the very high attrition in the combined Access/Technology Programs. While the success rate for the Electronics students increased to 38% the rate for the Civil/Mechanical students increased dramatically to 77%. It is likely that several factors, related to the extra term in the Access

Sleep disorders in high school and pre-university students

OpenAIRE

Célia R.S. Rocha; Sueli Rossini; Rubens Reimão

2010-01-01

Adolescence is a period in which youngsters have to make choices such as applying for university. The selection process is competitive, and it brings distress and anxiety, risk factors for the appearance of sleep disorders. Objective: To verify the occurrence of sleep disorders in third-year high school and pre-university students. Method: This cross-sectional descriptive study comprised a sample of 529 students (M=241, F=288) from three public schools, four private schools and two pre-univer...

Engineering Self-Efficacy Contributing to the Academic Performance of AMAIUB Engineering Students: A Qualitative Investigation

Science.gov (United States)

Aleta, Beda T.

2016-01-01

This research study aims to determine the factors of engineering skills self- efficacy sources contributing on the academic performance of AMAIUB engineering students. Thus, a better measure of engineering self-efficacy is needed to adequately assess engineering students' beliefs in their capabilities to perform tasks in their engineering…

Black Undergraduate Students Attitude toward Counseling and Counselor Preference

Science.gov (United States)

Duncan, Lonnie E.; Johnson, Darrell

2007-01-01

A help seeking survey and measures of socioeconomic status, cultural mistrust, and African Self-consciousness were administered to 315 Black college students to study attitudes toward counseling and counselor preference. Multiple Regression analysis indicated that gender, cultural mistrust, and socioeconomic status were statistically significant…

Students' Perceptions of Entrepreneurship at a Historically Black University in Central Mississippi

Science.gov (United States)

Curry, Mercidee

2012-01-01

The purpose of this study was to examine students' perceptions of entrepreneurship at a historically black university in central Mississippi. The study examined five areas of students' perceptions: entrepreneurship, an entrepreneur, entrepreneurial opportunities, entrepreneurship education, and entrepreneurship and technology, and demographic…

Exploring the relationship between time management skills and the academic achievement of African engineering students - a case study

Science.gov (United States)

Swart, Arthur James; Lombard, Kobus; de Jager, Henk

2010-03-01

Poor academic success by African engineering students is currently experienced in many higher educational institutions, contributing to lower financial subsidies by local governments. One of the contributing factors to this low academic success may be the poor time management skills of these students. This article endeavours to explore this relationship by means of a theoretical literature review and an empirical study. Numerous studies have been conducted in this regard, but with mixed results. The case study of this article involves a design module termed Design Projects III, where the empirical study incorporated an ex post facto study involving a pre-experimental/exploratory design using descriptive statistics. The results of this study were applied to various tests, which indicated no statistically significant relationship between time management skills and the academic achievement of African engineering students.

Evaluation of Methods for the Determination of Black Carbon Emissions from an Aircraft Gas Turbine Engine

Science.gov (United States)

The emissions from aircraft gas turbine engines consist of nanometer size black carbon (BC) particles plus gas-phase sulfur and organic compounds which undergo gas-to-particle conversion downstream of the engine as the plume cools and dilutes. In this study, four BC measurement ...

Appraising Capacity Building among Engineering Students in ...

African Journals Online (AJOL)

The results showed that 66.9% of the respondents had passion for their choice of engineering courses. Out of 110 students that had access to computer system, about 87.4% had related engineering application software on their personal computer while only 76.2% could use them proficiently. Based on the students' ...

Black Students' Recollections of Pathways to Resilience: Lessons for School Psychologists

Science.gov (United States)

Theron, Linda C.

2013-01-01

Drawing on narrative data from a multiple case study, I recount the life stories of two resilient Black South African university students to theorize about the processes that encouraged these students, familiar with penury and parental illiteracy, to resile. I aimed to uncover lessons for school psychologists about resilience, and their role in…

Young, Gifted, and Black: Promoting High Achievement among African-American Students.

Science.gov (United States)

Perry, Theresa; Steele, Claude; Hilliard, Asa G., III

In three linked but separate essays, this book explores how African-American students experience school in a society that has historically devalued their intellectual abilities. It calls for a new understanding of the unique obstacles black students face in American schools and points to a variety of educational practices that can mitigate those…

Language Learning Motivation among Malaysian Pre-University Students

Science.gov (United States)

Muftah, Muneera; Rafik-Galea, Shameem

2013-01-01

The study describes and examines Malaysian pre-university students' integrative and instrumental motivation toward learning English language. In this study, 182 non-English major students in one of the Malaysian public universities are selected to fill out a questionnaire reflecting their attitudes and motivation towards learning English. The…

Impacts of Innovativeness and Attitude on Entrepreneurial Intention: Among Engineering and Non-Engineering Students

Science.gov (United States)

Law, Kris M. Y.; Breznik, Kristijan

2017-01-01

This study attempted to explore the impacts of attitudinal antecedents on students' entrepreneurial intention. Comparisons between students of engineering and non-engineering backgrounds and gender groups were made. Total of 998 students from universities in Hong Kong were surveyed, leading to a number of highlights in the study. First, it is…

An index-based approach to assessing recalcitrance and soil carbon sequestration potential of engineered black carbons (biochars).

Science.gov (United States)

Harvey, Omar R; Kuo, Li-Jung; Zimmerman, Andrew R; Louchouarn, Patrick; Amonette, James E; Herbert, Bruce E

2012-02-07

The ability of engineered black carbons (or biochars) to resist abiotic and, or biotic degradation (herein referred to as recalcitrance) is crucial to their successful deployment as a soil carbon sequestration strategy. A new recalcitrance index, the R(50), for assessing biochar quality for carbon sequestration is proposed. The R(50) is based on the relative thermal stability of a given biochar to that of graphite and was developed and evaluated with a variety of biochars (n = 59), and soot-like black carbons. Comparison of R(50), with biochar physicochemical properties and biochar-C mineralization revealed the existence of a quantifiable relationship between R(50) and biochar recalcitrance. As presented here, the R(50) is immediately applicable to pre-land application screening of biochars into Class A (R(50) ≥ 0.70), Class B (0.50 ≤ R(50) carbon sequestration classes. Class A and Class C biochars would have carbon sequestration potential comparable to soot/graphite and uncharred plant biomass, respectively, whereas Class B biochars would have intermediate carbon sequestration potential. We believe that the coupling of the R(50), to an index-based degradation, and an economic model could provide a suitable framework in which to comprehensively assess soil carbon sequestration in biochars.

Beyond Blackboards: Engaging Underserved Middle School Students in Engineering.

Science.gov (United States)

Blanchard, Sarah; Judy, Justina; Muller, Chandra; Crawford, Richard H; Petrosino, Anthony J; White, Christina K; Lin, Fu-An; Wood, Kristin L

Beyond Blackboards is an inquiry-centered, after-school program designed to enhance middle school students' engagement with engineering through design-based experiences focused on the 21 st Century Engineering Challenges. Set within a predominantly low-income, majority-minority community, our study aims to investigate the impact of Beyond Blackboards on students' interest in and understanding of engineering, as well as their ability to align their educational and career plans. We compare participants' and nonparticipants' questionnaire responses before the implementation and at the end of the program's first academic year. Statistically significant findings indicate a school-wide increase in students' interest in engineering careers, supporting a shift in school culture. However, only program participants showed increased enjoyment of design-based strategies, understanding of what engineers do, and awareness of the steps for preparing for an engineering career. These quantitative findings are supported by qualitative evidence from participant focus groups highlighting the importance of mentors in shaping students' awareness of opportunities within engineering.

Creating meaningful learning experiences: Understanding students' perspectives of engineering design

Science.gov (United States)

Aleong, Richard James Chung Mun

There is a societal need for design education to prepare holistic engineers with the knowledge, skills, and attitudes to innovate and compete globally. Design skills are paramount to the espoused values of higher education, as institutions of higher learning strive to develop in students the cognitive abilities of critical thinking, problem solving, and creativity. To meet these interests from industry and academia, it is important to advance the teaching and learning of engineering design. This research aims to understand how engineering students learn and think about design, as a way for engineering educators to optimize instructional practice and curriculum development. Qualitative research methodology was used to investigate the meaning that engineering students' ascribe to engineering design. The recruitment of participants and corresponding collection of data occurred in two phases using two different data collection techniques. The first phase involved the distribution of a one-time online questionnaire to all first year, third year, and fourth year undergraduate engineering students at three Canadian Universities. After the questionnaire, students were asked if they would be willing to participate in the second phase of data collection consisting of a personal interview. A total of ten students participated in interviews. Qualitative data analysis procedures were conducted on students' responses from the questionnaire and interviews. The data analysis process consisted of two phases: a descriptive phase to code and categorize the data, followed by an interpretative phase to generate further meaning and relationships. The research findings present a conceptual understanding of students' descriptions about engineering design, structured within two educational orientations: a learning studies orientation and a curriculum studies orientation. The learning studies orientation captured three themes of students' understanding of engineering design: awareness

Learning style preferences among pre-clinical medical students

Directory of Open Access Journals (Sweden)

Aye Aye Mon

2014-02-01

Full Text Available Generally, different students employ different learning styles dur-ing their studies and medical students are exposed to diverse methods of teaching. Therefore, understanding students’ learning style preference is an important consideration for a high quality and effective teaching and learning process.The aim of the study was to study the variation of learning styles among pre-clinical medical students of SEGi University, Malaysia. A cross-sectional study was performed by using VARK (Visual, Audio, Reading and Kinaesthetic questionnaire version 7.2 to assess the learning style preference of 98 (n=98 pre-clinical medical students in SEGi University. The questionnaire consists of 16 items which identify four different learning styles: visual, aural, reading/writing and kin-esthetic. Descriptive statistics were used to identify the learning styles of students. 61 students preferred multimodal as their learning style, out of which 43 (70% of them were female stu-dents and 18 (30% were male students. 37 students preferred unimodal as their learning style out of which 22 (59% of them were female students and 15 (41% were male students. In addi-tion, female students had more diverse preferences than male students by having 10 out of the other 11 possible combinations in multimodal learning style of preference, whereas the male stu-dents only had 5 out of the 11 combinations. In this study, there was no significant gender difference in the percentages of males and female students who preferred unimodal and multimodal styles of information presentation (P= 0.263; α=0.05. To con-clude, the majority of students of both genders had chosen quad-modal as their learning style preference. The results of this study can provide useful information for improving the quality of the teaching and learning experiences of students.

Linking First-Year and Senior Engineering Design Teams: Engaging Early Academic Career Students in Engineering Design

Science.gov (United States)

Fox, Garey A.; Weckler, Paul; Thomas, Dan

2015-01-01

In Biosystems Engineering at Oklahoma State University, senior design is a two semester course in which students work on real-world projects provided by clients. First-year (freshmen and trans­fer) students enroll in an introductory engineering course. Historically, these students worked on a team-based analysis project, and the engineering design…

Comprehensive Training of Engineering Students through Continuing Education

Directory of Open Access Journals (Sweden)

Miguel Reynoso Flores

2014-01-01

Full Text Available This paper addresses a priority for student training in general and particularly for future engineers. Although this issue has been frequently addressed in recent years, proposals are still insufficient for engineering students. This paper is aimed at theoretically and empirically demonstrating the potential of continuing education as one of the key areas that engineering schools have for the comprehensive training of students. Preliminary results of a research project commissioned by the School of Mechanical and Electrical Engineering (Facultad de Ingeniería Mecánica y Electrica-FIME of Universidad Autónoma de Nuevo León, Mexico, are presented to respond to the need to improve the learning process of students with a comprehensive approach. The research justification and some of the results obtained in the exploratory phase are also described.

Digital Games, Gender and Learning in Engineering: Do Females Benefit as Much as Males?

Science.gov (United States)

Joiner, Richard; Iacovides, Jo; Owen, Martin; Gavin, Carl; Clibbery, Stephen; Darling, Jos; Drew, Ben

2011-04-01

The aim of this paper was to explore whether there is a gender difference in the beneficial effects of Racing Academy, which is a video game used to support undergraduate students learning of Mechanical Engineering. One hundred and thirty-eight undergraduate students (15 females and 123 males) participated in the study. The students completed a pre-test a week before they started using Racing Academy. The pre-test consisted of a test of students' knowledge of engineering, and a measure of students' motivation towards studying engineering. A week after using Racing Academy the students completed a post-test which was identical to the pre-test, except it also included a measure of how frequently they used Racing Academy and how motivating the students found playing Racing Academy. We found that after playing Racing Academy the students learnt more about engineering and there was no gender difference in the beneficial effect of Racing Academy, however there is some evidence that, female students found Racing Academy more motivating than male students. The implications for the use and design of video games for supporting learning for both males and females are discussed.

Pre-Columbian agricultural landscapes, ecosystem engineers, and self-organized patchiness in Amazonia.

Science.gov (United States)

McKey, Doyle; Rostain, Stéphen; Iriarte, José; Glaser, Bruno; Birk, Jago Jonathan; Holst, Irene; Renard, Delphine

2010-04-27

The scale and nature of pre-Columbian human impacts in Amazonia are currently hotly debated. Whereas pre-Columbian people dramatically changed the distribution and abundance of species and habitats in some parts of Amazonia, their impact in other parts is less clear. Pioneer research asked whether their effects reached even further, changing how ecosystems function, but few in-depth studies have examined mechanisms underpinning the resilience of these modifications. Combining archeology, archeobotany, paleoecology, soil science, ecology, and aerial imagery, we show that pre-Columbian farmers of the Guianas coast constructed large raised-field complexes, growing on them crops including maize, manioc, and squash. Farmers created physical and biogeochemical heterogeneity in flat, marshy environments by constructing raised fields. When these fields were later abandoned, the mosaic of well-drained islands in the flooded matrix set in motion self-organizing processes driven by ecosystem engineers (ants, termites, earthworms, and woody plants) that occur preferentially on abandoned raised fields. Today, feedbacks generated by these ecosystem engineers maintain the human-initiated concentration of resources in these structures. Engineer organisms transport materials to abandoned raised fields and modify the structure and composition of their soils, reducing erodibility. The profound alteration of ecosystem functioning in these landscapes coconstructed by humans and nature has important implications for understanding Amazonian history and biodiversity. Furthermore, these landscapes show how sustainability of food-production systems can be enhanced by engineering into them follows that maintain ecosystem services and biodiversity. Like anthropogenic dark earths in forested Amazonia, these self-organizing ecosystems illustrate the ecological complexity of the legacy of pre-Columbian land use.

Diesel Technology: Engines. [Teacher and Student Editions.

Science.gov (United States)

Barbieri, Dave; Miller, Roger; Kellum, Mary

Competency-based teacher and student materials on diesel engines are provided for a diesel technology curriculum. Seventeen units of instruction cover the following topics: introduction to engine principles and procedures; engine systems and components; fuel systems; engine diagnosis and maintenance. The materials are based on the…

Choosing STEM College Majors: Exploring the Role of Pre-College Engineering Courses

Science.gov (United States)

Phelps, L. Allen; Camburn, Eric M.; Min, Sookweon

2018-01-01

Despite the recent policy proclamations urging state and local educators to implement integrated science, technology, engineering, and mathematics (STEM) curricula, relatively little is known about the role and impact of pre-college engineering courses within these initiatives. When combined with appropriate mathematics and science courses, high…

Lubricant induced pre-ignition in an optical spark-ignition engine

OpenAIRE

Dingle, Simon Frederick

2014-01-01

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London This work focuses on the introduction of lubricant into the combustion chamber and the effect that this has on pre-ignition. Apparently for the first time, the work presented provides detailed full-bore optical data for lubricant induced pre-ignition and improves understanding of the super-knock phenomena that affects modern downsized gasoline engines. A new single-cylinder optical r...

Exploring the Perceptions of HBCU Student Affairs Practitioners toward the Racial Diversification of Black Colleges

Science.gov (United States)

Palmer, Robert T.; Arroyo, Andrew T.; Maramba, Dina C.

2018-01-01

While research has shown that the racial diversity of historically Black colleges and universities (HBCUs) is increasing, literature suggests that some stakeholders at HBCUs feel the diversification of Black colleges could change their culture, which some see as vital for promoting the success of Black students. Given this, the following study…

Transition from high schools to engineering education

DEFF Research Database (Denmark)

Kolmos, Anette; Holgaard, Jette Egelund; Clausen, Nicolaj Riise

2017-01-01

Pre-university engineering education has received increasing attention to attract more students to engineering and make them better prepared to enter engineering studies at university level. Denmark is one of the countries that offer established high school curriculum that makes engineering...... the core identity of the school. In a longitudinal research project, the cohort of all Danish engineering students who were enrolled in 2010 has been followed. This study takes a quantitative approach to highlight the differences in preparedness for engineering students who have a background...... themselves as being better prepared in relation to the conduct of experiments, engineering analysis and tolls, as well as in relation to process competences as design, problem solving and teamwork. The students from the profession-oriented high schools also find themselves better prepared in relation...

The Structural Relationship between Out-of-School Time Enrichment and Black Student Participation in Advanced Science

Science.gov (United States)

Young, Jamaal; Young, Jemimah

2018-01-01

The researchers tested a model of the structural relationship between Black student engagement in out-of-school time (OST) science enrichment and participation in advanced science courses in high school. The participants in the sample were Black students (N = 3,173) who participated in the High School Longitudinal Study of 2009/2012. The student…

Analysis of pre-heated fuel combustion and heat-emission dynamics in a diesel engine

Science.gov (United States)

Plotnikov, S. A.; Kartashevich, A. N.; Buzikov, S. V.

2018-01-01

The article explores the feasibility of diesel fuel pre-heating. The research goal was to obtain and analyze the performance diagrams of a diesel engine fed with pre-heated fuel. The engine was tested in two modes: at rated RPMs and at maximum torque. To process the diagrams the authors used technique developed by the Central Diesel Research Institute (CDRI). The diesel engine’s heat emission curves were obtained. The authors concluded that fuel pre-heating shortened the initial phase of the combustion process and moderated the loads, thus making it possible to boost a diesel engine’s mean effective pressure.

Behavior of Engineering Students in Kuwait University

OpenAIRE

M. A. Al-Ajmi; R. S. Al-Kandari

2015-01-01

This initial study is concerned with the behavior of engineering students in Kuwait University which became a concern due to the global issues of education in all levels. A survey has been conducted to identify academic and societal issues affecting the engineering student performance. The study is drawing major conclusions with regard to private tutoring and the online availability of textbooks’ solution manuals.

The Rise of Student-to-Student Learning: Youth-led Programs Impacting Engineering Education Globally

Directory of Open Access Journals (Sweden)

Julian O'Shea

2011-07-01

Full Text Available Around the globe, students and young engineers are playing an increasing role in the coordination and delivery of engineering education programs. Many youth-led initiatives are now conducted with students involved in all aspects of their creation, organisation and delivery. This trend presents an exciting opportunity for the education of engineering students, both those involved in delivery of the courses and for participants. This paper profiles four leading youth-led engineering education programs and analyses their structure and growth in recent years. Profiled are initiatives coordinated by Engineers Without Borders – Australia (EWB-A; the Board of European Students of Technology (BEST; the Electrical Engineering Students’ European Association (EESTEC; and the Student Platform for Engineering Education Development (SPEED. Each case study includes a brief history of the organisation, program overview, growth analysis and future projections. The common features amongst these programs were analysed, as were the aspects which made them distinct from traditional university offerings. Key findings about the initiatives include: an international focus; the mixture of formal learning and social aspects; an integral role of volunteers within the organisation; the use of residential programs; and the role of internal professional development of committee members and volunteers. Additionally, this paper outlines the benefits for universities and provides a guide for how engineering faculties can support and nurture these initiatives and effectively create partnerships.

Engineering Students' Views of Corporate Social Responsibility: A Case Study from Petroleum Engineering.

Science.gov (United States)

Smith, Jessica M; McClelland, Carrie J; Smith, Nicole M

2017-12-01

The mining and energy industries present unique challenges to engineers, who must navigate sometimes competing responsibilities and codes of conduct, such as personal senses of right and wrong, professional ethics codes, and their employers' corporate social responsibility (CSR) policies. Corporate social responsibility (CSR) is the current dominant framework used by industry to conceptualize firms' responsibilities to their stakeholders, yet has it plays a relatively minor role in engineering ethics education. In this article, we report on an interdisciplinary pedagogical intervention in a petroleum engineering seminar that sought to better prepare engineering undergraduate students to critically appraise the strengths and limitations of CSR as an approach to reconciling the interests of industry and communities. We find that as a result of the curricular interventions, engineering students were able to expand their knowledge of the social, rather than simply environmental and economic dimensions of CSR. They remained hesitant, however, in identifying the links between those social aspects of CSR and their actual engineering work. The study suggests that CSR may be a fruitful arena from which to illustrate the profoundly sociotechnical dimensions of the engineering challenges relevant to students' future careers.

Expose Mechanical Engineering Students to Biomechanics Topics

Science.gov (United States)

Shen, Hui

2011-01-01

To adapt the focus of engineering education to emerging new industries and technologies nationwide and in the local area, a biomechanics module has been developed and incorporated into a mechanical engineering technical elective course to expose mechanical engineering students at ONU (Ohio Northern University) to the biomedical engineering topics.…

Student Learning in Competence-Based Pre-Vocational Secondary Education.

NARCIS (Netherlands)

Dr P.J. Teune; P. den Brok; prof dr Douwe Beijaard; Dr. M. Koopman

2009-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n=719; 14 schools). Student preferences for certain types of goals and information processing

Fewer Resources, More Debt: Loan Debt Burdens Students at Historically Black Colleges and Universities

Science.gov (United States)

Saunders, Katherine M.; Williams, Krystal L.; Smith, Cheryl L.

2016-01-01

Student loans have become an increasingly important way for students and their families to pay for college, but for students at historically black colleges and universities (HBCUs), student loan debt is a substantial burden. Students who attend these institutions--many of whom are low-income and first-generation--must borrow at higher rates and,…

Black American College Students Report Higher Memory of Love for Mothers in Childhood Than White Students.

Science.gov (United States)

Patihis, Lawrence; Jackson, Corai E; Diaz, Jonathan C; Stepanova, Elena V; Herrera, Mario E

2018-01-01

Cultural differences between Black and White individuals in the South are connected to the inequitable history of the United States. We wondered if these cultural differences would translate to a particularly precious aspect of life: memories of love felt in childhood toward one's parents. Some past studies have shown that Whites score higher on parental attachment measures to parents than Blacks, while other studies show no significant differences. However, no previous study has ever measured memory of feelings of love in relation to differences between ethnicities. In this study, Black ( n = 124) and White ( n = 125) undergraduates self-reported the strength and frequency of their past feelings of love toward their mother and father in first, sixth, and ninth grade as well as their current feelings of love. Results suggested that Black students reported feeling more love for their mothers in first, sixth, and ninth grades compared to White students. These findings were not explained when we statistically adjusted for age, gender, socioeconomic status, education levels, income, number of years spent living with mother or father, stress, or personality. Therefore, this relationship may be explained by unmeasured or unmeasurable cultural differences. The direction of this effect was in the opposite direction from what we expected based on past attachment research. Given the inequities in U.S. history and the current discussions around ethnicity and race in the United States, the finding that Blacks reported higher remembered feelings of love for their mothers in childhood is intriguing and worthy of dissemination and discussion.

Social identities and racial integration in historically white universities: A literature review of the experiences of black students

Directory of Open Access Journals (Sweden)

Sandiso Bazana

2017-11-01

Full Text Available South African government has been promulgating pieces of legislation aimed at ensuring racial integration, especially in higher education, and indirectly enforcing acculturation in historically white universities. Studies have proven that institutional cultures in historically white universities alienate and exclude black students’ identities. These students’ sense of social identity, which includes culture, heritage, language and traditions, and consequently self-esteem and self-concept, is altered in these institutions. Research has been scant regarding the shape and form that black students’ identity assumes when they get to these spaces. Using Tajfel and Turner’s (1979 social identity theory and Berry’s (2005 theory of acculturation, this article explores the experiences of black students in negotiating their social identities in historically white universities. Evoking Steve Biko’s analysis of ‘artificial integration’ (1986, we hope to illustrate how the ‘integration’ narrative sought to discard the identity of black students and psychologically enforce a simulation of black students into white-established identities. The study has implications for policy development as we hope to sensitise theoretically the historically white universities to, apart from mere opening of spaces of learning, understand the social identity challenges of black students in these institutions.

Selected engagement factors and academic learning outcomes of undergraduate engineering students

Science.gov (United States)

Justice, Patricia J.

The concept of student engagement and its relationship to successful student performance and learning outcomes has a long history in higher education (Kuh, 2007). Attention to faculty and student engagement has only recently become of interest to the engineering education community. This interest can be attributed to long-standing research by George Kuh's, National Survey of Student Engagement (NSSE) at the Indiana University Center for Postsecondary Research. In addition, research projects sponsored by the National Science Foundation, the Academic Pathway Study (APS) at the Center for the Advancement of Engineering Education (CAEE) and the Center for the Advancement of Scholarship on Engineering Education (CASEE), Measuring Student and Faculty Engagement in Engineering Education, at the National Academy of Engineering. These research studies utilized the framework and data from the Engineering Change study by the Center for the Study of Higher Education, Pennsylvania State, that evaluated the impact of the new Accreditation Board of Engineering and Technology (ABET) EC2000 "3a through k" criteria identify 11 learning outcomes expected of engineering graduates. The purpose of this study was to explore the extent selected engagement factors of 1. institution, 2. social, 3. cognitive, 4. finance, and 5. technology influence undergraduate engineering students and quality student learning outcomes. Through the descriptive statistical analysis indicates that there maybe problems in the engineering program. This researcher would have expected at least 50% of the students to fall in the Strongly Agree and Agree categories. The data indicated that the there maybe problems in the engineering program problems in the data. The problems found ranked in this order: 1). Dissatisfaction with faculty instruction methods and quality of instruction and not a clear understanding of engineering majors , 2). inadequate Engineering faculty and advisors availability especially applicable

Pre-Clinical Medical Students' Exposure to and Attitudes Toward Pharmaceutical Industry Marketing.

Science.gov (United States)

Fein, Eric H; Vermillion, Michelle L; Uijtdehaage, Sebastian H J

2007-12-01

Background - Recent studies have examined the exposures and attitudes of physicians and third- and fourth-year medical students toward pharmaceutical industry marketing, but fewer studies have addressed these topics among pre-clinical medical students. Thus, the purpose of this study was to assess pre-clinical students' level of exposure to the pharmaceutical industry and their attitudes toward marketing. Method - First and second-year medical students at UCLA completed a 40-item survey based on previous studies. Results - Over three quarters of pre-clinical students (78.5% or 226 of 288) responded to the survey. Exposure to pharmaceutical industry marketing started very early in medical school. Most second-year students (77%) had received gifts including drug samples after three semesters. Most felt that this would not affect their future prescribing behavior. Conclusions - These findings and findings from related studies, coupled with the students' desire to learn more about the issue, suggest that an early educational intervention addressing this topic may be warranted in American medical schools.

Low Graduation Rates among Historically Black Colleges and Universities (HBCU) Student Athletes

Science.gov (United States)

Parker, Alvin D.

2017-01-01

A review of literature reveals that there is a dearth of research examining the low graduation rates among student-athletes at historically Black colleges and universities (HBCU's). By comparison, there has been numerous studies that have examined the African American student-athlete attending predominately White institutions (PWI's). The…

An Effective Industry-Based Mentoring Approach for the Recruitment of Women and Minorities in Engineering

Science.gov (United States)

Ilumoka, Abby; Milanovic, Ivana; Grant, Natalie

2017-01-01

This article reflects upon an investigative study of the powerful impact that mentoring partnerships have on pre-college students and young engineering professionals in Hartford, CT. It was found that these partnerships can provide very strong foundations for a diverse pre-college student engineering pipeline that includes significant numbers of…

46 CFR 166.10 - Course of study for engineering students.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Course of study for engineering students. 166.10 Section... AND APPROVAL OF NAUTICAL SCHOOL SHIPS § 166.10 Course of study for engineering students. The course of study for engineering students shall include (a) all the instruction necessary to fully equip the...

Hip-Hop's Influence on the Identity Development of Black Female College Students: A Literature Review

Science.gov (United States)

Henry, Wilma J.; West, Nicole M.; Jackson, Andrea

2010-01-01

This article explores unique issues regarding the effects of hip-hop culture on the identity development of young Black female college students. Through the lenses of womanist and Black feminist perspectives, the intersecting impact of race and gender are reviewed within the context of the competing influences of hip-hop on Black female identity.…

Investigation of students' experiences of gendered cultures in engineering workplaces

Science.gov (United States)

Male, Sally A.; Gardner, Anne; Figueroa, Eugenia; Bennett, Dawn

2018-05-01

Women remain severely under-represented in engineering in Australia as in all Western countries. This limits the pool of talent, standpoints and approaches within the profession. Furthermore, this under-representation equates to restriction of the benefits of being an engineer mainly to men. Gendered workplace experiences have been found to contribute to women leaving the profession. In this study we explore students' experiences of gendered cultures in engineering workplaces, using interviews with a purposive sample of 13 students (4 male) recruited following a previous survey. Although the overall experience of workplace learning is positive for many students, male and female engineering students reported experiences consistent with masculine cultures. Educators and employers must proactively lead improvements to the culture in engineering workplaces, prepare students for gendered workplaces and support students to reflect during and after workplace experiences. The experiences presented here could be adapted to enhance inclusivity training.

The Complex Dynamics of Student Engagement in Novel Engineering Design Activities

Science.gov (United States)

McCormick, Mary

In engineering design, making sense of "messy," design situations is at the heart of the discipline (Schon, 1983); engineers in practice bring structure to design situations by organizing, negotiating, and coordinating multiple aspects (Bucciarelli, 1994; Stevens, Johri, & O'Connor, 2014). In classroom settings, however, students are more often given well-defined, content-focused engineering tasks (Jonassen, 2014). These tasks are based on the assumption that elementary students are unable to grapple with the complexity or open-endedness of engineering design (Crismond & Adams, 2012). The data I present in this dissertation suggest the opposite. I show that students are not only able to make sense of, or frame (Goffman, 1974), complex design situations, but that their framings dynamically involve their nascent abilities for engineering design. The context of this work is Novel Engineering, a larger research project that explores using children's literature as an access point for engineering design. Novel Engineering activities are inherently messy: there are characters with needs, settings with implicit constraints, and rich design situations. In a series of three studies, I show how students' framings of Novel Engineering design activities involve their reasoning and acting as beginning engineers. In the first study, I show two students whose caring for the story characters contributes to their stability in framing the task: they identify the needs of their fictional clients and iteratively design a solution to meet their clients' needs. In the second, I show how students' shifting and negotiating framings influence their engineering assumptions and evaluation criteria. In the third, I show how students' coordinating framings involve navigating a design process to meet clients' needs, classroom expectations, and technical requirements. Collectively, these studies contribute to literature by documenting students' productive beginnings in engineering design. The

Effect of diesel pre-injection timing on combustion and emission characteristics of compression ignited natural gas engine

International Nuclear Information System (INIS)

Xu, Min; Cheng, Wei; Zhang, Hongfei; An, Tao; Zhang, Shaohua

2016-01-01

Highlights: • Pre-injection timing on combustion and emission of CING engine are studied. • Closely pre-injection operations leads to increase of combustion intensity. • Early pre-injection operations leads to lower combustion intensity. • Early pre-injection modes provide better NO x emission. - Abstract: Pre-injection strategy is considered to be one of the most important ways to improve diesel engine performance, emission and combustion. It is the same important factor in pilot diesel compression ignition natural gas (CING) engine. In this study, effects of pre-injection timing on combustion and emission performances were experimentally studied in a CING engine which was modified from a turbocharged six-cylinder diesel engine. The experiments were conducted at constant speed of 1400 rpm and different engine loads with a constant fuel injection pressure of 1100 bar. Main injection timing was fixed at 10 °CA BTDC in the advance process of pre-injection timing. The cylinder pressure, heart release rate (HRR), pressure rise rate (PRR), start of combustion (SOC) and coefficient of variation (COV IMEP ), as well as NO x , HC and CO emissions were analyzed. The results indicated that closely pre-injection operations lead to the advance of SOC which intensified combustion of in-cylinder mixture, thereby resulting in higher cylinder pressure, HRR and PRR, as well higher NO x emissions and lower HC and CO emissions. However, early pre-injection operations lead to lower cylinder pressure, HRR and PRR due to decreasing in combustion intensity. Pre-injection timing of 70 °CA BTDC is a conversion point in which influence of pre-injection fuel on ignition and combustion of natural gas nearly disappeared and lowest NO x emission could be obtained. Compared with single injection ignition mode, NO x emissions at the conversion point were reduced by 33%, 38% and 7% at engine load of 38%, 60% and 80% respectively. This is important for the conditions that ignition fuel

The Relationship between Identity-Related Constructs and Positive Mental Health in Black College Students

Science.gov (United States)

Mushonga, Dawnsha R.

2017-01-01

This cross-sectional, exploratory study examined positive mental health (PMH) in 156 Black college students, ages 18-25, attending Historically Black Colleges and Universities (HBCUs) and Predominantly White Institutions (PWIs). In addition, identity-related constructs such as spirituality, self-esteem, social support, life satisfaction, racial…

Perceived Advantages and Disadvantages of Using Pre-Exposure Prophylaxis (PrEP) among Sexually Active Black Women

Science.gov (United States)

Bond, Keosha T.; Gunn, Alana J.

2017-01-01

Knowledge of pre-exposure prophylaxis (PrEP) continues to remain scarce among Black women who are disproportionally affected by HIV in the United States. A thematic analysis of open-ended questions from a sample of Black women (n=119) who completed a mix-methods, online, e-health study was conducted to examine the perceived advantages and disadvantages of using PrEP. Being a female controlled method, empowerment, option for women with risky sex partners, and serodiscordant couples were advantages described. Disadvantages of PrEP were identified as the complexity of the choice, encouragement of sex with risky partners, increased burden, promotion of unprotected sex, and newness of the drug. PMID:28725660

Hope and Life Satisfaction in Black College Students Coping with Race-Related Stress

Science.gov (United States)

Danoff-Burg, Sharon; Prelow, Hazel M.; Swenson, Rebecca R.

2004-01-01

This exploratory study examined the effects of hope and coping with race-related stress on life satisfaction in Black college students. Findings indicated that students with high hope had greater coping efficacy and used more problem-focused coping than students with low hope. Neither coping nor hope had a direct effect on life satisfaction.…

Development of concept-based physiology lessons for biomedical engineering undergraduate students.

Science.gov (United States)

Nelson, Regina K; Chesler, Naomi C; Strang, Kevin T

2013-06-01

Physiology is a core requirement in the undergraduate biomedical engineering curriculum. In one or two introductory physiology courses, engineering students must learn physiology sufficiently to support learning in their subsequent engineering courses and careers. As preparation for future learning, physiology instruction centered on concepts may help engineering students to further develop their physiology and biomedical engineering knowledge. Following the Backward Design instructional model, a series of seven concept-based lessons was developed for undergraduate engineering students. These online lessons were created as prerequisite physiology training to prepare students to engage in a collaborative engineering challenge activity. This work is presented as an example of how to convert standard, organ system-based physiology content into concept-based content lessons.

An Australian study of possible selves perceived by undergraduate engineering students

Science.gov (United States)

Bennett, Dawn; Male, Sally A.

2017-11-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their engineering fears, expectations, and aspirations. The findings revealed many students to have a poor understanding of the realities of engineering work. Moreover, perceived gaps between self-efficacy and the requirements of engineering work appeared to be motivating if students deemed it possible to reduce the gap, but demotivating if they identified a characteristic over which there was perceived to be no control. The study suggests that these engineering students needed more opportunities to explore both the roles of engineers and their own possible selves. Overall, the findings indicate that higher education students may need encouragement and support to explore potential future roles, and they strengthen calls for further research in this area.

Weight and health status of black female students | Steyn | South ...

African Journals Online (AJOL)

Objective. To examine black female students for the occurrence of risk factors associated with chronic diseas~s of lifestyle, namely obesity, hypertension, nicotine usage, dyslipidaemia and compromised mental health (depression). Design. A cross-sectional analytical study design was used. All participants were examined ...

Exploring the experiences of female students in introductory project-based engineering courses at two- and four-year institutions

Science.gov (United States)

Swan, Amy K.

2011-12-01

This qualitative study explored the experiential and contextual factors that shaped female students' pathways into introductory project-based engineering classes at two community colleges and one four-year institution, as well as female students' experiences within and outside of these classes. The study was framed by Social Cognitive Career Theory (SCCT) (Lent, Brown & Hackett, 1996) and Bronfenbrenner's (1979) ecological systems theory. Findings were based on analyses of data gathered through multiple methods: observations; individual interviews with female students; focus group interviews with project teams; and document collection. The findings of this study revealed that while positive experiences with math or science were a likely pre-cursor to engineering interest, experiential learning appeared to be a more powerful force in fostering students' engineering interest. Specifically, participants developed an interest in engineering through academic, professional, and extracurricular engineering- and design-related activities that familiarized them with the tasks and skills involved in engineering work and helped them develop a sense of selfefficacy with regard to this work. Interest and self-efficacy, in turn, played a role in students' postsecondary educational decision-making processes, as did contextual factors including families and finances. This study's findings also showed that participants' project teams were a critically important microsystem within participants' ecological environments. Within this sometimes "chilly" microsystem, female students negotiated intrateam processes, which were in some cases affected by gender norms. Intrateam processes that influenced female students' project-based learning experiences included: interpersonal dynamics; leadership; and division of labor. This study also identified several ways in which the lived experiences of participants at the community colleges were different from, or similar to, those of participants

Formula Student as Part of a Mechanical Engineering Curriculum

Science.gov (United States)

Davies, Huw Charles

2013-01-01

Formula Student (FS) is a multi-university student design competition managed by the UK Institution of Mechanical Engineers. Students are required to demonstrate and prove their creativity and engineering skills through the design, manufacture and financing of a small formula style race car. This paper seeks to explore the educational value that…

MULTIDISCIPLINARY PROJECTS FOR SECOND YEAR CHEMICAL AND MECHANICAL ENGINEERING STUDENTS

Directory of Open Access Journals (Sweden)

MARWAN M. SHAMEL

2013-04-01

Full Text Available In the second semester of the second year of a Mechanical Engineering course, students are supposed to take a Module Outside the Main Discipline (MOMD. This module is chosen to be “Product Design Exercise” a module that is offered to Chemical Engineering students at the same stage. The aim was to expose students from both disciplines to an environment in which they are encouraged to interact with and engage team members with a relatively different background. The students were divided into eight groups all comprised of Chemical and Mechanical Engineering students, and they were offered different open-ended projects that were selected to exploit the knowledge developed by the students thus far and they were slightly skewed towards Chemical Engineering. The students demonstrated a high level of cooperation and motivation throughout the period of the project. Effective communication and closing of knowledge gaps were prevalent. At the end of the project period, students produced a journal paper in lieu of the project report.

Cognitive abilities of Emirati and German engineering university students.

Science.gov (United States)

Rindermann, Heiner; Baumeister, Antonia E E; Gröper, Anne

2014-03-01

According to human capital theory, individual competences and personality attributes are relevant for individual productivity and income. Within human capital, intelligence is crucial. To study engineering and work successfully as an engineer, high cognitive abilities are necessary, especially for work in research and development. In a study of 30 German and 30 Emirati engineering students (mean age: 22 years), both groups were tested with mathematical and figural intelligence scales (CogAT). German engineering students achieved a mean IQ of 116, and Emirati students 104 (in converted UK norms). In both groups male students achieved better results than females (2 to 4 IQ point difference). The results are compared with those from PISA and TIMSS. The possible causes of these results, their consequences and strategies for improvement are discussed.

The Relationship of Assertiveness and the Academic Success of Black Students in Predominantly White Institutions of Higher Education.

Science.gov (United States)

Spaights, Ernest; And Others

1987-01-01

Investigated relationship among nonacademic factors and retention of Black students at predominantly White universities. Examined assertiveness as measured by the College Self Expression Scale, cumulative grade point average, and retention of 119 Black college students. While nonsignificant findings prevailed when total sample was analyzed, trends…

Black and african students: individuals present, absent voices

Directory of Open Access Journals (Sweden)

Roseane Maria de Amorim

2015-08-01

Full Text Available This paper aims to describe and analyze some data from an extension project and research titled “The narratives of the self and the effects of affirmative action policies to black students who need of affirmative action and Africans." We have as central issues of our work the following questions: What do the students who need of affirmative action and not unitholders know about the quotas? What do the various African groups who are at university know about the quotas and their experience as a student in the Alagoas’ State? In methodological terms, we use some procedures and instruments of action research to raise our diagnostic procedures and social intervention. It is concluded after investigation that the affirmative action policies in college should be the subject of constant debate whether in academia or in society. There is ignorance on the part of students who need of affirmative action, not unitholders and africans student about the racial quotas, the policies of affirmative action and the collective human rights achievements and socio-historical character.

Relationship of academic success of medical students with motivation and pre-admission grades.

Science.gov (United States)

Luqman, Muhammad

2013-01-01

To determine predictive validity of pre-admission scores of medical students, evaluate correlation between level of motivation and later on academic success in a medical college. Analytical study. Foundation University Medical College, Islamabad, from June to August 2011. A non-probability convenience sampling of students of 1st to final year MBBS classes was done after obtaining informed consent. These students filled out 'Strength of Motivation for Medical School' (SMMS) questionnaire. The data of pre-admission grades of these students along with academic success in college according to examination results in different years were collected. The correlation between the pre-admission grades and score of SMMS questionnaire with their academic success in medical college was found by applying Pearson co-efficient of correlation in order to determine the predictive validity. Only 46% students revealed strong motivation. A significant, moderate correlation was found between preadmission scores and academic success in 1st year modular examination (0.52) which became weaker in various professional examinations in higher classes. However, no significant correlation was observed between motivation and academic success of medical students in college. Selecting medical students by pre-admission scores or motivation level alone may not be desirable. A combination of measures of cognitive ability criteria (FSc/pre-admission test scores) and non-cognitive skills (personality traits) is recommended to be employed with the use of right tools for selection of students in medical schools.

Intrinsic Motivation, Self-Perception, and Their Effects on Black Urban Elementary Students.

Science.gov (United States)

Marchant, Gregory J.

This study examined the effects of specific motivational dimensions and self-perceptions of a group of 47 urban black fourth and fifth grade students on attendance and academic achievement. Each student's responses to a measure of intrinsic and extrinsic motivation and a self-perception inventory were compared to each other and to his or her…

International express student's book : pre-intermediate

CERN Document Server

Taylor, Liz

1996-01-01

The New Edition of International Express Pre-Intermediate retains all the keys features of this popular and successel four-level course. It combines engaging, up-to-date topics with a time-efficient and student-centred approach to language work, and clearly focused activities that reflect learner's real communicative needs - the ideal course for professional adults who use English for work, travel, and socializing.

Differences in Persistence and Graduation Rates of Black Students in Texas Community Colleges: A Multiyear, Statewide Study

Science.gov (United States)

Moss, Sheldon

2017-01-01

Purpose: The purpose of this journal-ready dissertation was to examine the 1-year and 2-year persistence rates of Black students in Texas community colleges for the 2007-2008 through the 2014-2015 academic years. Specifically, the relationship of the 1-year and 2-year persistence rates for Black students as a function of their institutional status…

The Doctorate Production and Baccalaureate Origins of African Americans in the Sciences and Engineering.

Science.gov (United States)

Solorzano, Daniel G.

1995-01-01

Reviews the status of black doctorate production from U.S. universities during the 1980s, updating baseline information and examining the baccalaureate origins of African American doctorates. Black students continue to be underrepresented, especially in science and engineering, and gender differences persist. The role of historically black…

Pre-University Chemistry Students in a Mimicked Scholarly Peer Review

Science.gov (United States)

van Rens, Lisette; Hermarij, Philip; Pilot, Albert; Beishuizen, Jos; Hofman, Herman; Wal, Marjolein

2014-01-01

Peer review is a significant component in scientific research. Introducing peer review into inquiry processes may be regarded as an aim to develop student understanding regarding quality in inquiries. This study examines student understanding in inquiry peer reviews among pre-university chemistry students, aged 16-17, when they enact a design of a…

Humanitarian Aspirations of Engineering Students: Differences between Disciplines and Institutions

Directory of Open Access Journals (Sweden)

Angela R. Bielefeldt

2016-03-01

Full Text Available This study explored the aspirations of undergraduate engineering students in regard to helping others, examining potential differences between disciplines and institutions. Over 1900 undergraduate students from 17 U.S. universities responded to a survey in spring 2014. In open-ended responses, 15.5% of the students included some form of helping people and/or the world as one of the factors that motivated them to select their engineering major; for 6.7% of the students this was the primary or only motivating factor listed. Helping as a motivation was not equally prevalent among different engineering disciplines, being much more common among students majoring in biomedical, environmental, materials, and civil and less common in computer and aerospace. Different disciplines also varied in the priority for helping people relative to other future job factors - highest in chemical/biological, moderate in civil and related majors, and lowest among electrical/computer and mechanical. Institutional differences were found in the extent to which students indicated an importance that their career would help people and the extent to which an ability to help others was a central message in their major. The results indicate the percentages of engineering students who are most likely to embrace humanitarian engineering; fostering these aspirations in students could help with attraction and retention.

Empowering Engineering Students through Employability Skills

Science.gov (United States)

Kaushal, Urvashi

2016-01-01

A professional course program like engineering strives to get the maximum number of its students placed through campus interviews. While communication skills have been added in all the engineering courses with the aim to improve their performance in placement, the syllabus mostly concentrates on the development of four language skills. The…

Fostering Passion among First Year Engineering Students

Science.gov (United States)

Mazumder, Quamrul H.

2010-01-01

Engineering is a complex field of study. Declining enrollment in engineering programs in the United States is of concern and understanding the various factors that contribute to this decline is in order. Fostering a higher level of student engagement with the content may foster passion towards engineering which could increase academic competency…

Success in Undergraduate Engineering Programs: A Comparative Analysis by Race and Gender

Science.gov (United States)

Lord, Susan

2010-03-01

Interest in increasing the number of engineering graduates in the United States and promoting gender equality and diversification of the profession has encouraged considerable research on women and minorities in engineering programs. Drawing on a framework of intersectionality theory, this work recognizes that women of different ethnic backgrounds warrant disaggregated analysis because they do not necessarily share a common experience in engineering education. Using a longitudinal, comprehensive data set of more than 79,000 students who matriculated in engineering at nine universities in the Southeastern United States, this research examines how the six-year graduation rates of engineering students vary by disaggregated combinations of gender and race/ethnicity. Contrary to the popular opinion that women drop out of engineering at higher rates, our results show that Asian, Black, Hispanic, Native American, and White women who matriculate in engineering are as likely as men to graduate in engineering in six years. In fact, Asian, Black, Hispanic, and Native American women engineering matriculants graduate at higher rates than men and there is a small difference for white students. 54 percent of White women engineering matriculants graduate in six-years compared with 53 percent of white men. For male and female engineering matriculants of all races, the most likely destination six years after entering college is graduation within engineering. This work underscores the importance of research disaggregated by race and gender and points to the critical need for more recruitment of women into engineering as the low representation of women in engineering education is primarily a reflection of their low representation at matriculation.

Is It a Different World? Providing a Holistic Understanding of the Experiences and Perceptions of Non-Black Students at Historically Black Colleges and Universities

Science.gov (United States)

Arroyo, Andrew T.; Palmer, Robert T.; Maramba, Dina C.

2016-01-01

This qualitative study contributes an original holistic understanding of the perceptions and experiences of non-Black students (e.g., Asian American, Latino, and White) as they matriculate into historically Black colleges and universities (HBCUs), persist to graduation, and reflect on their experiences as graduates at HBCUs. Findings from this…

Promoting Inclusivity in STEM through Active Recruiting and Mentoring: The Pre-Major in Astronomy Program (Pre-MAP) at the University of Washington

Science.gov (United States)

Schwieterman, Edward; Binder, Breanna A.; Pre-Major in Astronomy Program

2016-01-01

The Pre-Major in Astronomy Program (Pre-MAP) is a research and mentoring program for entering undergraduate students offered by the University of Washington Astronomy Department since 2005. The primary goal of Pre-MAP is to recruit and retain students from groups traditionally underrepresented in science, technology, engineering, and mathematics (STEM) through early exposure to guided research projects. The Pre-MAP seminar is the core component of the program and offers instruction in computing skills, data manipulation, science writing, statistical analysis, and scientific speaking and presentation skills. Students choose research projects proposed by faculty, post-docs and graduate students in areas related to astrophysics, planetary science, and astrobiology. Pre-MAP has been successful in retaining underrepresented students in STEM fields relative to the broader UW population, and we've found these students are more likely to graduate and excel academically than their peers. As of fall 2015, more than one hundred students have taken the Pre-MAP seminar, and both internal and external evaluations have shown that all groups of participating students report an increased interest in astronomy and science careers at the end of the seminar. This talk will provide an overview of the program and the structure of the core seminar. In particular, the talk will focus on additions and revisions to the seminar course over the last few years, such as the introduction of a public speaking coach, career and internship modules, and the formalization of external lab tours.

FIRST Robotics as a model for experiential problem-based learning: A comparison of student attitudes and interests in science, mathematics, engineering, and technology

Science.gov (United States)

Griffith, Donald Sanford, Jr.

2005-07-01

This research study was undertaken to examine potential relationships between high school students' attitudes and interests in science, mathematics, engineering, and technology, and their participation in the FIRST Robotics Competition six-week challenge to design, and build a robot. High school students' gender and race, in relationship to students' interest in the aforementioned topics was also examined in this study. A convenience sample of 727 South Carolina public high school students agreed to participate in the study. Data were collected using pre-and post-survey questionnaires. Student participants completed pre-survey questionnaires at the onset of the 2005 FIRST Robotics Competition Kick-off, concurrent with the beginning of the second semester of the 2004--2005 school year. Participants completed post-survey questionnaires after six-weeks, the period of time allocated for teams to design, build, and ship their 2005 FIRST Robotics Competition robot. Data analyzed was collected from the group of students participating in FIRST Robotics (treatment), the experimental group, and the group of students who are not participating in FIRST Robotics (control). Findings reported that the pre- and post-survey questionnaire responses regarding attitudinal change were not significantly different in either the experimental or control group. High pre-survey dependent variable scores provided by students in the FIRST group did not allow for significant gain in each of the seven-attitudinal categories. Findings also indicated that there were significant attitudinal differences between students in the experimental group (FIRST), and students the control group (SMET) pre- and post-survey responses. Students in the FIRST group had statistically significant higher attitude means than students in the SMET group on both pre- and post-surveys in the seven-attitudinal categories. The frequency for responses to each question in the three interest categories on the pre- and post

Institutional factors that affect black South African students' perceptions of early childhood teacher education

Directory of Open Access Journals (Sweden)

M G Steyn

2014-03-01

Full Text Available Black students account for over 72% of enrolments in higher education, but only a small percentage of them choose Early Childhood Education (ECE as a field of study and complete the qualification. The purpose of this study was to examine, from the perspective of black ECE students, why so few of them enrol in this particular programme at a historically white university. Through a qualitative, case study approach the reasons for the low enrolment and completion rates were investigated. Participants mentioned that recruitment for this programme, particularly in rural areas should be improved. They also pointed out the higher prestige of other career options, the linguistic challenges they face, the cost of university education and early teacher education in particular, as well as access to transport and resources as barriers to recruitment and retention. Their recommendations for higher enrolment rates included the use of black students to recruit in rural and in township areas, increased funding for bursaries, and more culturally sensitive pedagogies in early childhood teacher education.

University of Colorado CubeSat Student Projects as Successful Model for Teaching Students about Engineering Practices

Science.gov (United States)

Palo, S. E.; Li, X.; Woods, T. N.; Kohnert, R.

2014-12-01

There is a long history of cooperation between students at the University of Colorado, Boulder and professional engineers and scientists at LASP, which has led to many successful space missions with direct student involvement. The recent student-led missions include the Student Nitric Oxide Explorer (SNOE, 1998 - 2002), the Student Dust Counter (SDC) on New Horizons (2006 - present), the Colorado Student Space Weather Experiment (CSSWE), being a very successful NSF CubeSat that launched in September 2012, and the NASA Miniature X-ray Solar Spectrometer (MinXSS) CubeSat (launch will be in early 2015). Students are involved in all aspects of the design, and they experience the full scope of the mission process from concept, to fabrication and test, and mission operations. A significant part of the student involvement in the CubeSat projects is gained by using the CubeSat development as a focal point for an existing two-semester course sequence in CU's Aerospace Engineering Sciences (AES) Department: the Space Hardware Design section of Graduate Projects I & II (ASEN 5018 & ASEN 6028). The goal of these courses is to teach graduate students how to design and build systems using a requirement-based approach and fundamental systems engineering practices. The two-semester sequence takes teams of about 15 students from requirements definition and preliminary design through manufacturing, integration, and testing. In addition to the design process, students learn key professional skills such as working effectively in groups, finding solutions to open-ended problems, and actually building a system to their own set of specifications. The partnership between AES and LASP allows us to include engineering professionals in the mix, thus more effectively training science and engineering students for future roles in the civilian or commercial space industry. The mentoring process with LASP engineers helps to mitigate risk of the inexperience of the students and ensures consistent

Math Achievement Trajectories among Black Male Students in the Elementary- and Middle-School Years

Science.gov (United States)

Zilanawala, Afshin; Martin, Margary; Noguera, Pedro A.; Mincy, Ronald B.

2018-01-01

In this article, we analyze the variation in math achievement trajectories of Black male students to understand the different ways these students successfully or unsuccessfully navigate schools and the school characteristics that are associated with their trajectories. Using longitudinal student-level data from a large urban US city (n = 7,039),…

SECONDARY WASTE/ETF (EFFLUENT TREATMENT FACILITY) PRELIMINARY PRE-CONCEPTUAL ENGINEERING STUDY

International Nuclear Information System (INIS)

May, T.H.; Gehner, P.D.; Stegen, Gary; Hymas, Jay; Pajunen, A.L.; Sexton, Rich; Ramsey, Amy

2009-01-01

This pre-conceptual engineering study is intended to assist in supporting the critical decision (CD) 0 milestone by providing a basis for the justification of mission need (JMN) for the handling and disposal of liquid effluents. The ETF baseline strategy, to accommodate (WTP) requirements, calls for a solidification treatment unit (STU) to be added to the ETF to provide the needed additional processing capability. This STU is to process the ETF evaporator concentrate into a cement-based waste form. The cementitious waste will be cast into blocks for curing, storage, and disposal. Tis pre-conceptual engineering study explores this baseline strategy, in addition to other potential alternatives, for meeting the ETF future mission needs. Within each reviewed case study, a technical and facility description is outlined, along with a preliminary cost analysis and the associated risks and benefits.

Engineers' Responsibilities for Global Electronic Waste: Exploring Engineering Student Writing Through a Care Ethics Lens.

Science.gov (United States)

Campbell, Ryan C; Wilson, Denise

2017-04-01

This paper provides an empirically informed perspective on the notion of responsibility using an ethical framework that has received little attention in the engineering-related literature to date: ethics of care. In this work, we ground conceptual explorations of engineering responsibility in empirical findings from engineering student's writing on the human health and environmental impacts of "backyard" electronic waste recycling/disposal. Our findings, from a purposefully diverse sample of engineering students in an introductory electrical engineering course, indicate that most of these engineers of tomorrow associated engineers with responsibility for the electronic waste (e-waste) problem in some way. However, a number of responses suggested attempts to deflect responsibility away from engineers towards, for example, the government or the companies for whom engineers work. Still other students associated both engineers and non-engineers with responsibility, demonstrating the distributed/collective nature of responsibility that will be required to achieve a solution to the global problem of excessive e-waste. Building upon one element of a framework for care ethics adopted from the wider literature, these empirical findings are used to facilitate a preliminary, conceptual exploration of care-ethical responsibility within the context of engineering and e-waste recycling/disposal. The objective of this exploration is to provide a first step toward understanding how care-ethical responsibility applies to engineering. We also hope to seed dialogue within the engineering community about its ethical responsibilities on the issue. We conclude the paper with a discussion of its implications for engineering education and engineering ethics that suggests changes for educational policy and the practice of engineering.

Teaching Engineering students to "Think thief"

NARCIS (Netherlands)

Hartel, Pieter H.; Junger, Marianne

We report on an educational experiment where information technology students were encouraged to think out of the box about the dark side of information technology. Instead of taking the usual point of view of the engineer we challenged the students to take the point of view of the motivated

Students' perceptions of the relevance of mathematics in engineering

Science.gov (United States)

Flegg, Jennifer; Mallet, Dann; Lupton, Mandy

2012-09-01

In this article, we report on the findings of an exploratory study into the experience of students as they learn first year engineering mathematics. Here we define engineering as the application of mathematics and sciences to the building and design of projects for the use of society [M. Kirschenman and B. Brenner, Education for Civil Engineering: A Profession of Practice, Leader. Manag. Eng. 10 (2010), p. 54]. Qualitative and quantitative data on students' views of the relevance of their mathematics study to their engineering studies and future careers in engineering was collected. The students described using a range of mathematics techniques (mathematics skills developed, mathematics concepts applied to engineering and skills developed relevant for engineering) for various usages (as a subject of study, a tool for other subjects or a tool for real world problems). We found a number of themes relating to the design of engineering mathematics curriculum emerged from the data. These included the relevance of mathematics within different engineering majors, the relevance of mathematics to future studies, the relevance of learning mathematical rigour and the effectiveness of problem-solving tasks in conveying the relevance of mathematics more effectively than other forms of assessment. We make recommendations for the design of engineering mathematics curriculum based on our findings.

Carbon black vs. black carbon and other airborne materials containing elemental carbon: Physical and chemical distinctions

International Nuclear Information System (INIS)

Long, Christopher M.; Nascarella, Marc A.; Valberg, Peter A.

2013-01-01

Airborne particles containing elemental carbon (EC) are currently at the forefront of scientific and regulatory scrutiny, including black carbon, carbon black, and engineered carbon-based nanomaterials, e.g., carbon nanotubes, fullerenes, and graphene. Scientists and regulators sometimes group these EC-containing particles together, for example, interchangeably using the terms carbon black and black carbon despite one being a manufactured product with well-controlled properties and the other being an undesired, incomplete-combustion byproduct with diverse properties. In this critical review, we synthesize information on the contrasting properties of EC-containing particles in order to highlight significant differences that can affect hazard potential. We demonstrate why carbon black should not be considered a model particle representative of either combustion soots or engineered carbon-based nanomaterials. Overall, scientific studies need to distinguish these highly different EC-containing particles with care and precision so as to forestall unwarranted extrapolation of properties, hazard potential, and study conclusions from one material to another. -- Highlights: •Major classes of elemental carbon-containing particles have distinct properties. •Despite similar names, carbon black should not be confused with black carbon. •Carbon black is distinguished by a high EC content and well-controlled properties. •Black carbon particles are characterized by their heterogenous properties. •Carbon black is not a model particle representative of engineered nanomaterials. -- This review demonstrates the significant physical and chemical distinctions between elemental carbon-containing particles e.g., carbon black, black carbon, and engineered nanomaterials

Engineering Education and Students' Challenges: Strategies toward Enhancing the Educational Environment in Engineering Colleges

Science.gov (United States)

Alkandari, Nabila Y.

2014-01-01

The main goal of this research is to gain an understanding of the challenges which have to be confronted by the engineering students at the College of Engineering and Petroleum at Kuwait University. The college has a large number of students, of which three hundred and eighty five were selected on a random basis for study purposes. The results…

Effects of Engineering Design-Based Science on Elementary School Science Students' Engineering Identity Development across Gender and Grade

Science.gov (United States)

Capobianco, Brenda M.; Yu, Ji H.; French, Brian F.

2015-04-01

The integration of engineering concepts and practices into elementary science education has become an emerging concern for science educators and practitioners, alike. Moreover, how children, specifically preadolescents (grades 1-5), engage in engineering design-based learning activities may help science educators and researchers learn more about children's earliest identification with engineering. The purpose of this study was to examine the extent to which engineering identity differed among preadolescents across gender and grade, when exposing students to engineering design-based science learning activities. Five hundred fifty preadolescent participants completed the Engineering Identity Development Scale (EIDS), a recently developed measure with validity evidence that characterizes children's conceptions of engineering and potential career aspirations. Data analyses of variance among four factors (i.e., gender, grade, and group) indicated that elementary school students who engaged in the engineering design-based science learning activities demonstrated greater improvements on the EIDS subscales compared to those in the comparison group. Specifically, students in the lower grade levels showed substantial increases, while students in the higher grade levels showed decreases. Girls, regardless of grade level and participation in the engineering learning activities, showed higher scores in the academic subscale compared to boys. These findings suggest that the integration of engineering practices in the science classroom as early as grade one shows potential in fostering and sustaining student interest, participation, and self-concept in engineering and science.

UAF Space Systems Engineering Program: Engaging Students through an Apprenticeship Model

Science.gov (United States)

Thorsen, D.

2017-12-01

Learning by doing has been the mantra of engineering education for decades, however, the constraints of semester length courses limits the types and size of experiences that can be offered to students. The Space Systems Engineering Program (SSEP) at the University of Alaska Fairbanks provides interdisciplinary engineering and science students with hands-on experience in all aspects of space systems engineering through a design, build, launch paradigm applied to balloon and rocket payloads and small satellites. The program is structured using an apprenticeship model such that students, freshmen through graduate, can participate in multi-year projects thereby gaining experiences appropriate to their level in college. Students enter the lab in a trainee position and receive training on lab processes and design software. Depending on the student's interests they learn how to use specific lab equipment and software design tools. Trainees provide support engineering under guidance of an upper classman. As the students' progress in their degree program and gain more expertise, they typically become part of a specific subsystem team, where they receive additional training in developing design documents and in writing requirements and test documents, and direct their efforts to meeting specific objectives. By the time the student reaches their senior year, they have acquired the leadership role for a specific subsystem and/or a general leadership role in the lab. If students stay to pursue graduate degrees, they assume the responsibility of training and mentoring other undergraduates in their areas of expertise. Throughout the program upper class students mentor the newer students. The Space Systems Engineering Program strives to reinforce a student's degree program through these large scale projects that place engineering in context.

Building a more diverse biomedical engineering workforce: Biomedical engineering at the university of the district of Columbia, a historically black college & university.

Science.gov (United States)

Thompson, Lara A; Adebayo, A Segun; Nian Zhang; Haghani, Sasan; Dowell, Kathleen; Shetty, Devdas

2016-08-01

Biomedical Engineering (BME) is a new, multidisciplinary, and rapidly growing field, however, the BME Workforce suffers from limited ethnic and gender diversity. Despite the demand and growth of this new field due to its public health importance, only 4 out of the 107 Historically Black Colleges and Universities (HBCUs) nationwide offers a Bachelor's of Science (B.S.) in Bio-Engineering related fields. In order to contribute to a growing BME Workforce, HBCUs need to react and offer more degree-programs relevant to BME. At the University of the District of Columbia (UDC), an HBCU and the District's only public institution for higher learning, we have recently established a new, degree program: Bachelor of Science in Biomedical Engineering (B.S. in BME) full-board approved in Fall 2014, with program activities initiated in Fall 2015. The educational goal of this program is to enhance the quality and diversity of the BME Workforce via student professional development, new and relevant BME courses, and BME scholarly activities (e.g., guest lectures and journal club sessions), ultimately to increase the number of ethnic minorities pursuing careers and degrees in BME. Through our program activities, we are aiming to meet the nation's demand to contribute to a diverse BME workforce, directed towards solving problems in human health. A secondary, but related goal, is to increase the diversity of STEM-related fields. This paper summarizes our initial, but encouraging, BME activity-related findings. However, this study will be longitudinal (on a multiple year time period) to observe the true outcomes of our initiative.

Engineering for All: A Middle School Program to Introduce Students to Engineering as a Potential Social Good

Science.gov (United States)

Hacker, Michael; Crismond, David; Hecht, Deborah; Lomask, Michal

2017-01-01

This article is the first of a two-part series about Engineering for All (EfA), a $1.7M National Science Foundation-funded project, which introduces middle school students to engineering, not only as a career path, but as an endeavor with potential for doing social good. Engineering for All opens students' eyes to the role engineers play in…

Pre-university Chemistry Students in a Mimicked Scholarly Peer Review

NARCIS (Netherlands)

van Rens, L.; Hermarij, P.; Pilot, A.; Beishuizen, J.J.; Hofman, H.; van der Wal, M.

2014-01-01

Peer review is a significant component in scientific research. Introducing peer review into inquiry processes may be regarded as an aim to develop student understanding regarding quality in inquiries. This study examines student understanding in inquiry peer reviews among pre-university chemistry

Student-driven courses on the social and ecological responsibilities of engineers : commentary on "student-inspired activities for the teaching and learning of engineering ethics".

Science.gov (United States)

Baier, André

2013-12-01

A group of engineering students at the Technical University of Berlin, Germany, designed a course on engineering ethics. The core element of the developed Blue Engineering course are self-contained teaching-units, "building blocks". These building blocks typically cover one complex topic and make use of various teaching methods using moderators who lead discussions, rather than experts who lecture. Consequently, the students themselves started to offer the credited course to their fellow students who take an active role in further developing the course themselves.

Student involvement as a vehicle for empowerment: a case study of the student platform for engineering education development

KAUST Repository

Delaine, David A.

2010-08-01

This paper examines the mission, structure and outputs of one organisation, the Student Platform for Engineering Education Development (SPEED), as a case study for how student-led organisations can use student involvement to promote and sustain student self-efficacy in an academic field. SPEED attracts young people to engineering through student participation in engineering education (EE). SPEED is a global, non-profit student organisation that functions as an interdisciplinary network to diversify dialogue, stimulate change and impact the development of EE and its effect on society. SPEED is directly attracting young people to engineering in various ways: the organisation of its keynote event, the Global Student Forum; facilitating interactions between globally minded, socially inclined engineers with aspirations to change the world; and through the global dissemination of SPEED\\'s work and practices through broad and relevant channels. Short-term outcomes are highlighted here. This case study can serve as a model for student engagement and involvement in other disciplines. © 2010 SEFI.

Modeling Student Success in Engineering Education

Science.gov (United States)

Jin, Qu

2013-01-01

In order for the United States to maintain its global competitiveness, the long-term success of our engineering students in specific courses, programs, and colleges is now, more than ever, an extremely high priority. Numerous studies have focused on factors that impact student success, namely academic performance, retention, and/or graduation.…

Motivating students in engineering & ICT education

NARCIS (Netherlands)

Ir. Peter van Kollenburg; Ir. Dick van Schenk Brill

2009-01-01

We found out that 25 % of our students came to study at the Electrical & Electronic Engineering department (E&E) because they were active (as a hobby) in music. Because of this the E&E department offers their students to work in video and audio themes in all projects of their education. From our

Photonics education development for electrical engineering students

Science.gov (United States)

Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

2017-08-01

We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

Impact of distributed virtual reality on engineering knowledge retention and student engagement

Science.gov (United States)

Sulbaran, Tulio Alberto

Engineering Education is facing many problems, one of which is poor knowledge retention among engineering students. This problem affects the Architecture, Engineering, and Construction (A/E/C) industry, because students are unprepared for many necessary job skills. This problem of poor knowledge retention is caused by many factors, one of which is the mismatch between student learning preferences and the media used to teach engineering. The purpose of this research is to assess the impact of Distributed Virtual Reality (DVR) as an engineering teaching tool. The implementation of DVR addresses the issue of poor knowledge retention by impacting the mismatch between learning and teaching style in the visual versus verbal spectrum. Using as a point of departure three knowledge domain areas (Learning and Instruction, Distributed Virtual Reality and Crane Selection as Part of Crane Lift Planning), a DVR engineering teaching tool is developed, deployed and assessed in engineering classrooms. The statistical analysis of the data indicates that: (1) most engineering students are visual learners; (2) most students would like more classes using DVR; (3) engineering students find DVR more engaging than traditional learning methods; (4) most students find the responsiveness of the DVR environments to be either good or very good; (5) all students are able to interact with DVR and most of the students found it easy or very easy to navigate (without previous formal training in how to use DVR); (6) students' knowledge regarding the subject (crane selection) is higher after the experiment; and, (7) students' using different instructional media do not demonstrate statistical difference in knowledge retained after the experiment. This inter-disciplinary research offers opportunities for direct and immediate application in education, research, and industry, due to the fact that the instructional module developed (on crane selection as part of construction crane lift planning) can be

Emotional intelligence increases over time: A longitudinal study of Australian pre-registration nursing students.

Science.gov (United States)

Foster, Kim; Fethney, Judith; McKenzie, Heather; Fisher, Murray; Harkness, Emily; Kozlowski, Desirée

2017-08-01

Emotional intelligence (EI) has been associated with positive outcomes for nursing students. Higher EI is associated with personal wellbeing and stress management, higher academic performance, stronger nursing leadership and practice performance, and greater patient safety. While there is an increasing body of evidence on nursing students' EI, there is minimal evidence on EI over time during pre-registration programs. To measure EI in pre-registration nursing students from program commencement to conclusion to ascertain EI over time and examine the relationship between EI and academic performance. Longitudinal repeated measures study between March 2010-February 2013 at a metropolitan university in Australia. 111 nursing students (74.8% female) contributed data on at least two occasions. Participants were enrolled in a pre-registration Master of Nursing degree. Half the cohort (55.0%) comprised Graduate Entry students who completed the course in two years full time. The other 45% were enrolled in an undergraduate degree in arts, science or health science, combined with the same pre-registration Master of Nursing Degree. These students completed their Combined Degree program in four years full time. Participants had a mean age of 24.7years (SD=7.36). EI was measured for commencing students (T1) using the Assessing Emotions Scale (AES), then a further three times: end of first year (T2; 9 months follow up); beginning of second year (12 months follow up; T3) and end of the program (T4; 24/36 months follow up). Students' EI was found to increase across the program; one subscale of EI (managing others' emotions) was related to higher academic performance; and there was a significant increase in the Utilising Emotions subscale scores over time. Pre-registration nurse education contributes to strengthening students' EI over time. Specific EI education scaffolded throughout programs is recommended in pre-registration curricula. Copyright © 2017. Published by Elsevier Ltd.

First-Year University Science and Engineering Students' Understanding of Plagiarism

Science.gov (United States)

Yeo, Shelley

2007-01-01

This paper is a case study of first-year science and engineering students' understandings of plagiarism. Students were surveyed for their views on scenarios illustrating instances of plagiarism in the context of the academic work and assessment of science and engineering students. The aim was to explore their understandings of plagiarism and their…

What Ideas Do Students Associate with "Biotechnology" and "Genetic Engineering"?

Science.gov (United States)

Hill, Ruaraidh; Stanisstreet, Martin; Boyes, Edward

2000-01-01

Explores the ideas that students aged 16-19 associate with the terms 'biotechnology' and 'genetic engineering'. Indicates that some students see biotechnology as risky whereas genetic engineering was described as ethically wrong. (Author/ASK)

"Soft-Engineering" Students Learning Math during Project Work on Optical Illusions

DEFF Research Database (Denmark)

Timcenko, Olga; Triantafyllou, Evangelia

2015-01-01

Media Technology is a study line between engineering, art and humanities, situated at Faculty of Engineering and Science of Aalborg University. Although formally students of engineering, Media Technology students show even greater difficulties with entry-level mathematical knowledge than typical ...

Tough or Tender: (Dis)Similarities in White College Students' Perceptions of Black and White Women

Science.gov (United States)

Donovan, Roxanne A.

2011-01-01

Although intersectional theory and empirical evidence suggest that race impacts how women are perceived, there is a dearth of research on how the dominant culture stereotypes Black women compared to White women. The current study addresses this gap using an intersectional framework to investigate White college students' stereotypes of Black and…

Using Pre-Assessment and In-Class Questions to Change Student Understanding of Molecular Movements

Directory of Open Access Journals (Sweden)

Jia Shi

2017-05-01

Full Text Available Understanding how different types of molecules move through cell membranes is a fundamental part of cell biology. To identify and address student misconceptions surrounding molecular movement through cell membranes, we surveyed student understanding on this topic using pre-class questions, in-class clicker questions, and subsequent exam questions in a large introductory biology course. Common misconceptions identified in student responses to the pre-class assessment questions were used to generate distractors for clicker questions. Two-tier diagnostic clicker questions were used to probe incoming common student misconceptions (first tier and their reasoning (second tier. Two subsequent lectures with assessment clicker questions were used to help students construct a new framework to understand molecular movement through cell membranes. Comparison of pre-assessment and post-assessment (exam performance showed dramatic improvement in students’ understanding of molecular movement: student answers to exam questions were 74.6% correct with correct reasoning while only 1.3% of the student answers were correct with correct reasoning on the pre-class assessment. Our results show that students’ conceptual understanding of molecular movement through cell membranes progressively increases through discussions of a series of clicker questions and suggest that this clicker-based teaching strategy was highly effective in correcting common student misconceptions on this topic.

Providing Co-Curricular Support: A Multi-Case Study of Engineering Student Support Centers

Science.gov (United States)

Lee, Walter C., Jr.

2015-01-01

In response to the student retention and diversity issues that have been persistent in undergraduate engineering education, many colleges have developed Engineering Student Support Centers (ESSCs) such as Minority Engineering Programs (MEPs) and Women in Engineering Programs (WEPs). ESSCs provide underrepresented students with co-curricular…

Multivariate Analysis of Students' Performance in Math Courses and Specific Engineering Courses

OpenAIRE

H. Naccache; R. Hleiss

2016-01-01

The aim of this research is to study the relationship between the performance of engineering students in different math courses and their performance in specific engineering courses. The considered courses are taken mainly by engineering students during the first two years of their major. Several factors are being studied, such as gender and final grades in the math and specific engineering courses. Participants of this study comprised a sample of more than thousands of engineering students a...

Discovery Camp Excites Students about Engineering and Technology Careers

Science.gov (United States)

Massiha, G. H.

2011-01-01

In the United States and elsewhere, there is a dramatic shortage of engineers and technologists. And, unfortunately, these professions often suffer from a lack of awareness among K-12 students. Clearly, educators need to show students the very exciting and lucrative aspects of these fields. Engineering and technology are consistently listed by…

Patent Information Use in Engineering Technology Design: An Analysis of Student Work

Science.gov (United States)

Phillips, Margaret; Zwicky, Dave

2017-01-01

How might engineering technology students make use of patent information in the engineering design process? Librarians analyzed team project reports and personal reflections created by students in an undergraduate mechanical engineering technology design course, revealing that the students used patents to consider the patentability of their ideas,…

The First Year of College: Understanding Student Persistence in Engineering

OpenAIRE

Hayden, Marina Calvet

2017-01-01

This research study aimed to expand our understanding of the factors that influence student persistence in engineering. The unique experiences of engineering students were examined as they transitioned into and navigated their first year of college at a public research university in California. Most students provided similar responses with respect to the way they experienced the transition to college and social life. There was, however, wide student response variation regarding their experien...

Predicting Pre-Service Teachers' Intention of Implementing Peer Assessment for Low-Achieving Students

Science.gov (United States)

Yim, Su Yon; Cho, Young Hoan

2016-01-01

Despite the benefits of peer assessment, many teachers are not willing to implement it, particularly for low-achieving students. This study used the theory of planned behaviour to predict pre-service teachers' intention to use peer assessment for low-achieving students. A total of 229 pre-service teachers in Singapore participated in the survey…

Engineering Students: Enhancing Employability Skills through PBL

Science.gov (United States)

H, Othman; Mat Daud K., A.; U, Ewon; Salleh B, Mohd; Omar N., H.; Baser J, Abd; Ismail M., E.; A, Sulaiman

2017-05-01

As a developing country, Malaysia faces challenging tasks to develop her economy just like many other countries. Nowadays, change involves many aspects like the economy from agriculture to manufacturing, technology from modern to more advanced ones; mindset from traditional to advanced and so on. Previous studies show that one of the major issues facing local graduates is the lack of employability skills. This problem concerns not only the government but undergraduates and institutions alike. From the pedagogical aspect, one of the more effective ways to improve this is through instructional delivery and in this case the use of Problem-based Learning (PBL). The need to adopt PBL should involved applied subjects undertaken by engineering students. Studies have shown that the use of PBL has been proven to make learning more attractive and effective. In this research, we studied the effectiveness of PBL towards enhancing employability skills among engineering undergraduates. This study adopted a combination of qualitative and quantitative approaches. Data was collected using documents analysis. Student samples comprised manufacturing engineering undergraduates from public institutions of higher learning in Malaysia. The results show that student’s employability skills can be enhanced using PBL. In addition, students become more competitive towards making them more relevance with the needs of the industry with regard to employability skills. In conclusion, PBL is a very effective catalyst towards raising the employability skills among engineering undergraduates and should be adopted in all engineering education.

Misconceptions About Sound Among Engineering Students

Science.gov (United States)

Pejuan, Arcadi; Bohigas, Xavier; Jaén, Xavier; Periago, Cristina

2012-12-01

Our first objective was to detect misconceptions about the microscopic nature of sound among senior university students enrolled in different engineering programmes (from chemistry to telecommunications). We sought to determine how these misconceptions are expressed (qualitative aspect) and, only very secondarily, to gain a general idea of the extent to which they are held (quantitative aspect). Our second objective was to explore other misconceptions about wave aspects of sound. We have also considered the degree of consistency in the model of sound used by each student. Forty students answered a questionnaire including open-ended questions. Based on their free, spontaneous answers, the main results were as follows: a large majority of students answered most of the questions regarding the microscopic model of sound according to the scientifically accepted model; however, only a small number answered consistently. The main model misconception found was the notion that sound is propagated through the travelling of air particles, even in solids. Misconceptions and mental-model inconsistencies tended to depend on the engineering programme in which the student was enrolled. However, students in general were inconsistent also in applying their model of sound to individual sound properties. The main conclusion is that our students have not truly internalised the scientifically accepted model that they have allegedly learnt. This implies a need to design learning activities that take these findings into account in order to be truly efficient.

A Critical Race Case Analysis of Black Undergraduate Student Success at an Urban University

Science.gov (United States)

Harper, Shaun R.; Smith, Edward J.; Davis, Charles H. F., III

2018-01-01

Presented in this article is a case study of Black students' enrollment, persistence, and graduation at Cityville University, an urban commuter institution. We combine quantitative data from the University's Office of Institutional Research and the U.S. Department of Education with qualitative insights gathered in interviews with students,…

Racial Microaggressions among Asian American and Latino/a Students at a Historically Black University

Science.gov (United States)

Palmer, Robert T.; Maramba, Dina C.

2015-01-01

Research illustrates that the enrollments of Asian American and Latino/a students are increasing at historically Black colleges and universities (HBCUs). Nevertheless, research on how these students experience the institutional climates of HBCUs is nonexistent; hence, we sought to explore the college-choice process and perceptions of campus…

A community-based, interdisciplinary rehabilitation engineering course.

Science.gov (United States)

Lundy, Mary; Aceros, Juan

2016-08-01

A novel, community-based course was created through collaboration between the School of Engineering and the Physical Therapy program at the University of North Florida. This course offers a hands-on, interdisciplinary training experience for undergraduate engineering students through team-based design projects where engineering students are partnered with physical therapy students. Students learn the process of design, fabrication and testing of low-tech and high-tech rehabilitation technology for children with disabilities, and are exposed to a clinical experience under the guidance of licensed therapists. This course was taught in two consecutive years and pre-test/post-test data evaluating the impact of this interprofessional education experience on the students is presented using the Public Service Motivation Scale, Civic Actions Scale, Civic Attitudes Scale, and the Interprofessional Socialization and Valuing Scale.

Creativity Development for Engineering Students

DEFF Research Database (Denmark)

Zhou, Chunfang; Holgaard, Jette Egelund; Kolmos, Anette

2010-01-01

In this paper we outline two approaches to enhance creative skills in a PBL environment at Aalborg University, Denmark. The two strategies are respectively characterized by 1) integrating creativity training into curriculum and 2) introducing real life engineering projects for students. Two cases...

Report on student participants at the 2003 Annual Meeting of the National Society of Black Physicists

Energy Technology Data Exchange (ETDEWEB)

Julius Dollison, Michael Neuchatz

2003-07-01

The first meeting of African American physicists was held in 1973 at Fisk University in Nashville, Tennessee, with around 50 Black physicists in attendance. In 1977, this organization was formally established as the National Society of Black Physicists (NSBP) out of a need to address many concerns of African American physicists. During the ensuing years the Conference began to grow and was hosted by different institutions at various geographic locations. This year, the 2003 Annual Conference of the National Society of Black Physicists and Black Physics Students was hosted by Spelman College in Atlanta, Georgia during the weekend of February 12th-15th, 2003. This Conference brought together over 500 African American physics students and working physicists. Also attending were corporate and graduate school recruiters, administrators, professional society representatives and others concerned with the small representation of minorities in the field of physics. The organizers of the Conference contracted with the Statistical Research Center of the American Institute of Physics to conduct a formal evaluative study of the meeting, resulting in this report. The evaluation questionnaire was designed by the organizers of the NSBP conference with input from the Statistical Research Center's staff. It included questions on the students' backgrounds and demographic characteristics, physics research experience, career goals, challenges faced in their academic pursuits, and ratings of various aspects of the conference. The questionnaire was distributed at the conference when the students signed in. Of the 330 students who were registered, roughly 304 attended and were given the four-page questionnaire to complete. Responses were collected on the last night of the conference, with 172 (approximately 57%) returning completed questionnaires. This low response rate could be attributed in part to the fact that respondents were asked to provide possibly sensitive personal

The Application of Problem-Based Learning in Mechanical Engineering

Science.gov (United States)

Putra, Z. A.; Dewi, M.

2018-02-01

The course of Technology and Material Testing prepare students with the ability to do a variety of material testing in the study of mechanical engineering. Students find it difficult to understand the materials to make them unable to carry out the material testing in accordance with the purpose of study. This happens because they knowledge is not adequately supported by the competence to find and construct learning experience. In this study, quasy experiment research method with pre-post-test with control group design was used. The subjects of the study were students divided in two groups; control and experiment with twenty-two students in each group. Study result: their grades showed no difference in between the pre-test or post-test in control group, but the difference in grade existed between the pre-test and post-test in experiment group. Yet, there is no significant difference in the study result on both groups. The researcher recommend that it is necessary to develop Problem-Based Learning that suits need analysis on D3 Program for Mechanical Engineering Department at the State University of Padang, to ensure the compatibility between Model of Study and problems and need. This study aims to analyze how Problem-Based Learning effects on the course of Technology and Material Testing for the students of D3 Program of Mechanical Engineering of the State University of Padang.

Native American Indian Successes in Natural Resources, Science and Engineering: PreK through Ph.D.

Science.gov (United States)

Bolman, J. R.

2005-12-01

We are living in a definite time of change. Distinct changes are being experienced in our most sacred and natural environments. This is especially true on Native lands. Native people have lived for millennia in distinct and unique ways. The knowledge of balancing the needs of people with the needs of our natural environments is paramount in all tribal societies. This inherent knowledge has become the foundation on which to build a "blended" contemporary understanding of western science. The Dakota's and Northern California have recognized the critical need in understanding successful tribal strategies to engage educational systems (K-12 and higher education), to bring to prominence the professional development opportunities forged through working with tribal peoples and ensure the growth of Native people in STEM (Science, Technology, Engineering and Mathematics) professions. The presentation will highlight: 1) current philosophies on building a STEM Native workforce; 2) successful educational programs/activities in PreK-Ph.D. systems; 3) current Native professionals, their research and tribal applicability; and 4) forwarding thinking for creating sustainable environmental and social infrastructures for all people. South Dakota School of Mines and Technology (SDSM&T) and Humboldt State University (HSU) have been recognized nationally for their partnerships with Native communities. SDSM&T has set record numbers for graduating Native students in science and engineering. SDSM&T had 27 graduates in five years (2000-2005) and hosted more than 1000+ Native students for programs and activities. Humboldt State University is the only university in the CSU system with a program focusing specifically on Natives in natural resources, science and engineering as well as a Native American Studies degree. Both universities have designed programs to meet current needs and address challenging issues in Earth, Wind, Fire and Water. The programs are funded through NASA, NSF, NIH and

Supporting Students' Preparation for the Viva: Their Pre-Conceptions and Implications for Practice

Science.gov (United States)

Wellington, Jerry

2010-01-01

There has been relatively little research on the pre-conceptions of doctoral students about the final examination, the viva voce and hence there is a shortage of evidence to underpin activities designed to prepare them for this experience. The present paper, which is based upon data from a wide range of focus groups of pre-viva students, seeks to…

Low (linear) teacher effect on student achievement in pre-academic physics education

NARCIS (Netherlands)

Cottaar - Haverkorn van Rijsewijk, A.

2012-01-01

This study investigates the effect of physics education on students' achievement in a large-scale quantitative study of pre-academic high school students throughout the Netherlands. Two aspects of teacher characteristics as perceived by their students are included: their pleasantness principally

Adaptation of abbreviated mathematics anxiety rating scale for engineering students

Science.gov (United States)

Nordin, Sayed Kushairi Sayed; Samat, Khairul Fadzli; Sultan, Al Amin Mohamed; Halim, Bushra Abdul; Ismail, Siti Fatimah; Mafazi, Nurul Wirdah

2015-05-01

Mathematics is an essential and fundamental tool used by engineers to analyse and solve problems in their field. Due to this, most engineering education programs involve a concentration of study in mathematics courses whereby engineering students have to take mathematics courses such as numerical methods, differential equations and calculus in the first two years and continue to do so until the completion of the sequence. However, the students struggled and had difficulties in learning courses that require mathematical abilities. Hence, this study presents the factors that caused mathematics anxiety among engineering students using Abbreviated Mathematics Anxiety Rating Scale (AMARS) through 95 students of Universiti Teknikal Malaysia Melaka (UTeM). From 25 items in AMARS, principal component analysis (PCA) suggested that there are four mathematics anxiety factors, namely experiences of learning mathematics, cognitive skills, mathematics evaluation anxiety and students' perception on mathematics. Minitab 16 software was used to analyse the nonparametric statistics. Kruskal-Wallis Test indicated that there is a significant difference in the experience of learning mathematics and mathematics evaluation anxiety among races. The Chi-Square Test of Independence revealed that the experience of learning mathematics, cognitive skills and mathematics evaluation anxiety depend on the results of their SPM additional mathematics. Based on this study, it is recommended to address the anxiety problems among engineering students at the early stage of studying in the university. Thus, lecturers should play their part by ensuring a positive classroom environment which encourages students to study mathematics without fear.

"Dirt Cheap" Project Teaches Soils Engineering

Science.gov (United States)

Roman, Harry T.

2010-01-01

This article describes a soil-testing activity that enables students to learn some interesting and useful things about how soil behaves under varied conditions. It offers a great way to give them a practical pre-engineering experience and will show them how engineers think about construction and how local soils influence building design. The…

"STEMulating" success factors: An investigation of the academic talents of successful Black male college graduates from STEM programs

Science.gov (United States)

Hendricks, Jill T.

This phenomenological research study explored the contributing factors experienced by Black males that epitomized their academic success in a STEM (Science, Technology, Engineering, and Mathematics) area of study. During this investigative project, eleven Black male students were interviewed to determine how they were able to successfully navigate and complete a STEM degree. The data was collected through a qualitative inquiry, which involved interviewing students and collecting the data and organizing their perspectives into common themes. The principal findings in this study suggest that Black males can excel when primary influential people establish high expectations and believe and encourage Black males to succeed by providing the essential educational support models requisite to warrant success; the Black male maintains and affirms a self-assured self-worth in himself; the Black male is exposed to these fields and professions early on in their educational quest to enable them to witness first hand powerful and productive opportunities and pathways to academic success; exposure to other Black successful male role models who can mentor and show positive proof that with effort, these fields can become a reality; increase in academic motivation and recommendations from educators and counselors who direct and guide students into and away from these rigorous career fields. An analysis of the students' individual stories gave a revealing look into the pathways of their consciousness, emotional growth, and perspectives about being a successful STEM major. This kind of insight can be a constructive diagnostic tool for students, educators, counselors, and administrators who want to motivate and influence future students to major in STEM fields of study.

Completion of an Online Library Module Improves Engineering Student Performance on Information Literacy Skills Tests

Directory of Open Access Journals (Sweden)

Rachel E. Scott

2016-12-01

Full Text Available A Review of: Zhang, Q., Goodman, M., & Xie, S. (2015. Integrating library instruction into the Course Management System for a first-year engineering class: An evidence-based study measuring the effectiveness of blended learning on students’ information literacy levels. College & Research Libraries, 76(7, 934-958. http://dx.doi.org/10.5860/crl.76.7.934 Objective – To assess the efficacy of an online library module and of blended learning methods on students’ information literacy skills. Design – Multi-modal, pre- and posttests, survey questionnaire, and focus groups. Setting – Public research university in London, Ontario, Canada. Subjects – First-year engineering students. Methods – Of 413 students enrolled in Engineering Science (ES 1050, 252 volunteered to participate in the study. Participants were asked to complete the online module, a pretest, a posttest, an online follow-up survey, and to take part in a focus group. Researchers generated a pretest and a posttest, each comprised of 15 questions:; multiple choice, true or false, and matching questions which tested students’ general and engineering-specific information literacy skills. The pretest and posttest had different, but similarly challenging, questions to ensure that students involved in the study would not have an advantage over those who had opted out. While all components of the study were voluntary, the posttest was a graded course assignment. In-person tutorials were offered on 4 occasions, with only 15 students participating. Both tutorial and module content were designed to cover all questions and competencies tested in the pretest and the posttest, including Boolean operators, peer review, identifying plagiarism, engineering standards, engineering handbooks, search strategies, patents, article citations, identifying reliable sources, and how to read journal articles. The posttest survey was delivered in the CMS immediately after the posttest was completed. It

Improving motivation and engagement in core engineering courses with student teams

Science.gov (United States)

Trenshaw, Kathryn Faye

Team-based projects are common in capstone engineering design courses and increasingly common in first-year engineering programs. Despite high enrollments and budget cutbacks affecting many programs, second- and third-year students can also benefit from team-based project experiences, which motivate them to succeed in engineering and prepare them for a globally competitive workforce. My dissertation research demonstrates that team design projects can be incorporated into the curricula of engineering departments, and these projects result in positive affective outcomes for students. Using ABET outcomes and Self Determination Theory (SDT) as the background for my studies, I investigated students' confidence, motivation, and sense of community after experiencing team design projects in two different engineering departments at a large public institution. In the first study, I used a sequential mixed methods approach with a primary quantitative phase followed by an explanatory qualitative phase to evaluate a chemical engineering program that integrated team design projects throughout the curriculum. The evaluation methods included a survey based on desired ABET outcomes for students and focus groups to expand on the quantitative results. Students reported increased confidence in their design, teamwork, and communication skills after completing the projects. In my second and third studies, I used qualitative interviews based on SDT to explore student motivation in an electrical and computer engineering course redesigned to support students' intrinsic motivation to learn. SDT states that intrinsic motivation to learn is supported by increasing students' sense of autonomy, competence, and relatedness in regard to their learning. Using both narrative inquiry and phenomenological methodologies, I analyzed data from interviews of students for mentions of autonomy, competence, and relatedness as well as course events that were critical in changing students' motivation

Physical Activity Behaviors of Students of a Rural Historically Black College

Science.gov (United States)

Kemper, Karen A.; Welsh, Ralph S.

2010-01-01

Physical activity can have a positive impact on health disparities among African Americans. Objective: In this study, we assessed physical activity behaviors and correlates of students of a Historically Black College. Methods: In September 2004, an online survey and pedometers were used to measure physical activity behavior and correlates.…

The Humanistic Side of Engineering: Considering Social Science and Humanities Dimensions of Engineering in Education and Research

Science.gov (United States)

Hynes, Morgan; Swenson, Jessica

2013-01-01

Mathematics and science knowledge/skills are most commonly associated with engineering's pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the…

Student employment and study effort for engineering students

DEFF Research Database (Denmark)

Clemmensen, Line Katrine Harder; Harder, D. E.

2015-01-01

more than those in studies from e.g. UK and US [3, 4, 5]. A similar trend was seen in a study from Norway [6]. Government financial support seems to limit the amount of hours spent on paid work but not the percentage of students who take on paid work. Thus, full-time studies with benefits of increased...... capabilities and experience gained through employment could be aided by proper policies. Additionally, one of the highest impacts on study activity was the perceived study environment. As the engineering students have four hours per week of interaction with an instructor for each five ECTS...... to answer if the full-time student is under demise in these settings as opposed to settings without financial support [1, 2]. The research consisted of a web-based survey amongst all students at the Technical University of Denmark (DTU). The students in this survey had fewer employment hours and studied...

Assessment of the knowledge and attitudes regarding HIV/AIDS among pre-clinical medical students in Israel

Science.gov (United States)

2014-01-01

Background Today’s medical students are the future physicians of people living with HIV/AIDS (PLWHA). It is therefore essential that medical students possess the appropriate knowledge and attitudes regarding PLWHA. This study aims to evaluate knowledge and attitudes of pre-clinical Israeli medical students and to assess whether their knowledge and attitudes change throughout their pre-clinical studies. Methods A cross-sectional study was conducted among all pre-clinical medical students from the four medical schools in Israel during the academic year of 2010/2011 (a total of 1,470 students). A self-administered questionnaire was distributed. The questionnaire sought student responses pertaining to knowledge of HIV transmission and non-transmission routes, basic knowledge of HIV/AIDS treatment and attitudes towards HIV/AIDS. Results The study’s response rate was 62.24 percent. Knowledge among pre-clinical medical students was generally high and showed a statistically significant improvement as students progressed through their pre-clinical studies. However, there were some misconceptions, mostly regarding HIV transmission via breastfeeding and knowledge of HIV prevention after exposure to the virus. Students’ attitudes were found to include stigmatizing notions. Furthermore, the majority of medical students correlated HIV with shame and fear. In addition, students’ attitudes toward HIV testing and providing confidential medical information were contradictory to health laws, protocols and guidelines. Overall, no positive changes in students’ attitudes were observed during the pre-clinical years of medical school. Conclusion The knowledge of pre-clinical medical students in Israel is generally high, although there are some knowledge inadequacies that require more emphasis in the curricula of the medical schools. Contrary to HIV-related knowledge, medical students’ attitudes are unaffected by their progression through medical school. Therefore, medical

Changing the Engineering Student Culture with Respect to Academic Integrity and Ethics.

Science.gov (United States)

VanDeGrift, Tammy; Dillon, Heather; Camp, Loreal

2017-08-01

Engineers create airplanes, buildings, medical devices, and software, amongst many other things. Engineers abide by a professional code of ethics to uphold people's safety and the reputation of the profession. Likewise, students abide by a code of academic integrity while learning the knowledge and necessary skills to prepare them for the engineering and computing professions. This paper reports on studies designed to improve the engineering student culture with respect to academic integrity and ethics. To understand the existing culture at a university in the USA, a survey based on a national survey about cheating was administered to students. The incidences of self-reported cheating and incidences of not reporting others who cheat show the culture is similar to other institutions. Two interventions were designed and tested in an introduction to an engineering course: two case studies that students discussed in teams and the whole class, and a letter of recommendation assignment in which students wrote about themselves (character, strengths, examples of ethical decisions) three years into the future. Students were surveyed after the two interventions. Results show that first-year engineering students appreciate having a code of academic integrity and they want to earn their degree without cheating, yet less than half of the students would report on another cheating student. The letter of recommendation assignment had some impact on getting students to think about ethics, their character, and their actions. Future work in changing the student culture will continue in both a top-down (course interventions) and bottom-up (student-driven interventions) manner.

The engineering capstone course fundamentals for students and instructors

CERN Document Server

Hoffman, Harvey F

2014-01-01

This essential book takes students and instructors through steps undertaken in a start-to-finish engineering project as conceived and presented in the engineering capstone course. The learning experience follows an industry model to prepare students to recognize a need for a product or service and work in a team; identify competition, patent overlap, and necessary resources; generate a project proposal that accounts for business issues; prepare a design, develop and fabricate the product or service; develop a test plan to evaluate the product or service; and prepare and deliver a final report and presentation. Throughout the book, students are asked to examine the business viability of the project. The Engineering Capstone Course: Fundamentals for Students and Instructors emphasizes that a design must meet a set of realistic technical specifications and constraints, including examination of attendant economics, environmental needs, sustainability, manufacturability, health and safety, governmental regulations...

Factors affecting the matriculation of African American undergraduate students in science, mathematics, engineering, and technology

Science.gov (United States)

Hall, Alfred L., II

Previous research studies indicated that African Americans remain severely underrepresented in the field of science, mathematics, engineering, and technology (SMET), making up only 3% of that workforce, while representing 11.1% of all professional and related workers and 12.6% of the general population. As this country moves towards a more culturally diverse population, then representation of African Americans in SMET-related fields must be addressed in order to ensure our nation's competitiveness in a global market. This research study analyzed characteristics of African American undergraduate SMET majors participating in the Alliance for Minority Participation (AMP) program in six different states located in the Southeast region of the United States. These states consisted of Alabama, Florida, Georgia, Mississippi, North Carolina, and South Carolina. AMP program participants completed a survey questionnaire, which collected information about potential factors that could affect their matriculation in SMET programs of studies at their respective institutions. Follow-up interviews and focus group sessions were also conducted with AMP participants to provide supplemental information to the survey data. The results of student responses were analyzed according to the type of institution the students attended (Historically Black College or University and Majority White Institution) as well as by the statewide Alliance program in which the students were involved. The students responded to survey questions that asked for their reasons for majoring in their field of study, their level of satisfaction with their institution, their impressions of student support programs and persons, their impressions of faculty and advisors, their reasons for thinking of switching majors, and their level of high school preparation. Statistical analyses of the student responses found that African American AMP students attending Historically Black Colleges and Universities differed from those

Sifting for Success: A Grounded Theory Approach to Sponsorship of Black Student Academic Success

Science.gov (United States)

Powell, Shameka N.

2015-01-01

Numerous findings and theories have been used to make sense of African Americans students' educational successes and experiences. Along those lines, the purpose of this study is to generate a theoretical framework of sponsorship that is grounded in Black students' educational experiences. Sponsorship is taken to be the process through which agents…

Evolving social responsibility understandings, motivations, and career goals of undergraduate students initially pursuing engineering degrees

Science.gov (United States)

Rulifson, Gregory A.

Engineers impact the lives of every person every day, and need to have a strong sense of social responsibility. Understanding what students think about social responsibility in engineering and their futures is very important. Further, by identifying influences that change these ideas and shape their conceptualizations, we can intervene to help prepare students for their responsibilities as part of the profession in the future. This thesis presents the experiences, in their own words, of 34 students who started in engineering. The study is composed of three parts: (i) engineering students' ideas about socially responsible engineering and what influenced these ideas, (ii) how students see themselves as future socially responsible engineers and how this idea changes over their first three years of college, and (iii) what social responsibility-related reasons students who leave engineering have for choosing a new major. Results show that students are complicated and have varied paths through and out of engineering studies. Students came up with their own ideas about socially responsible engineering that converged over the years on legal and safety related aspects of the profession. Relatedly, students identified with the engineering profession through internships and engineering courses, and rarely described socially responsible aspirations that could be accomplished with engineering. More often, those students who desired to help the disadvantaged through their engineering work left engineering. Their choice to leave was a combination of an unsupportive climate, disinterest in their classes, and a desire to combine their personal and professional social responsibility ambitions. If we want engineering students to push the engineering profession forward to be more socially responsible, we can identify the effective influences and develop a curriculum that encourages critical thinking about the social context and impacts of engineering. Additionally, a social

Learning processes of students in competence based pre-vocational secondary education

NARCIS (Netherlands)

Koopman, M.; Teune, P.J.; Beijaard, D.; Brok, den P.J.

2009-01-01

The purpose of this study was to validate a causal and hierarchical model to elaborate on the relation between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education-students. This model can be used to describe students'

Learning processes of students in competence-based pre-vocational secondary education

NARCIS (Netherlands)

prof dr Douwe Beijaard; Dr. M. Koopman; P. den Brok; Dr P.J. Teune

2008-01-01

The purpose of this study was to validate a causal and hierarchical model that describes the relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education-students (n=719; 14 schools). Preferences of students for

Exploring pre-service science teachers' pedagogical capacity for formative assessment through analyses of student answers

Science.gov (United States)

Aydeniz, Mehmet; Dogan, Alev

2016-05-01

Background: There has been an increasing emphasis on empowering pre-service and in-service science teachers to attend student reasoning and use formative assessments to guide student learning in recent years. Purpose: The purpose of this study was to explore pre-service science teachers' pedagogical capacity for formative assessment. Sample: This study took place in Turkey. The participants include 53 pre-service science teachers in their final year of schooling. All but two of the participants are female. Design and methods: We used a mixed-methods methodology in pursing this inquiry. Participants analyzed 28 responses to seven two-tiered questions given by four students of different ability levels. We explored their ability to identify the strengths and weaknesses in students' answers. We paid particular attention to the things that the pre-service science teachers noticed in students' explanations, the types of inferences they made about students' conceptual understanding, and the affordances of pedagogical decisions they made. Results: The results show that the majority of participants made an evaluative judgment (i.e. the answer is correct or incorrect) in their analyses of students' answers. Similarly, the majority of the participants recognized the type of mistake that the students made. However, they failed to successfully elaborate on fallacies, limitations, or strengths in student reasoning. We also asked the participants to make pedagogical decisions related to what needs to be done next in order to help the students to achieve academic objectives. Results show that 8% of the recommended instructional strategies were of no affordance, 64% of low-affordance, and 28% were of high affordance in terms of helping students achieve the academic objectives. Conclusion: If our goal is to improve pre-service science teachers' noticing skills, and the affordance of feedback that they provide, engaging them in activities that asks them to attend to students' ideas

Research of the pre-launch powered lubrication device of major parts of the engine D-240

Science.gov (United States)

Korchuganova, M.; Syrbakov, A.; Tkachev, A.; Zorina, T.

2015-09-01

In the publication, the issues have been considered concerning combustion engine start wear of mobile machines in case of outside storage in the conditions of low environmental temperature. Based on the analysis of existing methods and constructions of powered lubrication devices for contact surfaces of engines, a design of a combined device has been suggested which unites the functions of hydraulic and heat accumulators. On the basis of the elaborated design, preparatory tests have been conducted in order to evaluate the effectiveness of pre-start oil circulation in the engine D-240, as well as the effectiveness rate of thermoinsulation and the heating device of the hydraulic accumulator. The findings of the survey have shown that the pre-start powered lubrication device for major parts of the engine is effective.

Oxford engineering students to study new solutions for vacuum chambers

CERN Multimedia

Department of Engineering Science - University of Oxford

2012-01-01

In April, eleven engineering science students in their third year at Oxford University were invited here to present their design ideas for new vacuum chamber materials to be used in accelerators. We publish below an abstract of the article that the University of Oxford featured on its website.   The 11 Oxford students who worked at CERN on alternatives to beryllium in vacuum chambers. (Photo courtesy of the Department of Engineering Science, University of Oxford.) Engineering Science students invited to design for CERN’s Large Hadron Collider In April, eleven Engineering Science students in their third year were invited to the CERN laboratory in Geneva to present their ideas for new vacuum chamber designs for the experiments of the Large Hadron Collider (LHC). Their design objectives were to propose alternatives to beryllium – the material used for some of the existing experimental vacuum chambers. Beryllium (chemical element with the symbol Be and atomic number 4) is to...

SUCCESS FRAMEWORK FOR TEACHING ERGONOMICS TO ENGINEERING STUDENTS

Directory of Open Access Journals (Sweden)

MUSHTAK AL-ATABI

2013-04-01

Full Text Available Taylor's University School of Engineering (Malaysia is a project-based-learning school that puts a conscious effort to educate engineers on the importance of applying ergonomic principles at the conceiving and designing stages of a product life cycle. This paper reports on an innovative approach to teaching ergonomics using the SUCCESS framework (Simple, Unexpected, Credible, Concrete, Emotions, Story, and Simulation. This teaching technique was adopted to engage the hearts and minds of the students and get them to embrace ergonomics as an important skill for engineers. Comparing students’ module evaluation and feedback, both before and after the adoption of the SUCCESS framework showed that students enjoyed the new approach of teaching and found it more fulfilling.

Minority Student Enrollments in Higher Education: A Guide to Institutions with Highest Percent of Asian, Black, Hispanic, and Native American Students.

Science.gov (United States)

Garrett Park Press, MD.

This resource guide provides data on minorities enrolled in 500 colleges and universities. Descriptions of each institution are followed by total student enrollment and the percentage of students from four minority groups: Asian, Black, Hispanic, and Native American. The types of academic programs offered by the institution are illustrated by…

Examining the Effectiveness of Pre-Reading Strategies on Saudi EFL College Students' Reading Comprehension

Science.gov (United States)

Al Rasheed, Hana S. S.

2014-01-01

Reading comprehension is a key issue in learning English as a foreign language, and it is critical that teachers utilize pre-reading strategies in reading classes in order to help students enhance their comprehension. The present study investigates the effectiveness of two pre-reading strategies on EFL students' performance in reading…

A Summer Leadership Development Program for Chemical Engineering Students

Science.gov (United States)

Simpson, Annie E.; Evans, Greg J.; Reeve, Doug

2012-01-01

The Engineering Leaders of Tomorrow Program (LOT) is a comprehensive curricular, co-curricular, extra-curricular leadership development initiative for engineering students. LOT envisions: "an engineering education that is a life-long foundation for transformational leaders and outstanding citizens." Academic courses, co-curricular certificate…

A Phenomenographic Investigation of the Ways Engineering Students Experience Innovation

Science.gov (United States)

Fila, Nicholas David

Innovation has become an important phenomenon in engineering and engineering education. By developing novel, feasible, viable, and valued solutions to complex technical and human problems, engineers support the economic competitiveness of organizations, make a difference in the lives of users and other stakeholders, drive societal and scientific progress, and obtain key personal benefits. Innovation is also a complex phenomenon. It occurs across a variety of contexts and domains, encompasses numerous phases and activities, and requires unique competency profiles. Despite this complexity, many studies in engineering education focus on specific aspects (e.g., engineering students' abilities to generate original concepts during idea generation), and we still know little about the variety of ways engineering students approach and understand innovation. This study addresses that gap by asking: 1. What are the qualitatively different ways engineering students experience innovation during their engineering projects? 2. What are the structural relationships between the ways engineering students experience innovation? This study utilized phenomenography, a qualitative research method, to explore the above research questions. Thirty-three engineering students were recruited to ensure thorough coverage along four factors suggested by the literature to support differences related to innovation: engineering project experience, academic major, year in school, and gender. Each participant completed a 1-2 hour, semi-structured interview that focused on experiences with and conceptions of innovation. Whole transcripts were analyzed using an eight-stage, iterative, and comparative approach meant to identify a limited number of categories of description (composite ways of experiencing innovation comprised of the experiences of several participants), and the structural relationships between these categories. Phenomenographic analysis revealed eight categories of description that were

Ain't I Black Too: Counterstories of Black Atheists in College

Science.gov (United States)

Snipes, Jeremy T.

2017-01-01

Increasingly Black college students are identifying as atheist, however few empirical studies in higher education and student affairs are exploring the phenomenon. This dissertation examines the question, "How do Black atheist understand their identity in college?" Using Higginbotham's Politics of Respectability and tenants of Critical…

Results of Summer Enrichment Program to Promote High School Students' Interest in Engineering

Science.gov (United States)

Hart, Brenda; McAnulty, Kate

2014-01-01

For more than thirty years, personnel from the University of Louisville J.B. Speed School of Engineering have presented a summer program targeting high school students historically underrepresented in engineering fields. INSPIRE provides these students with an introduction to careers in engineering and assists the students in planning their…

Reading Achievement and In-Grade Retention Rate Differentials for Mexican-American and Black Students in Selected States of the Southwest.

Science.gov (United States)

Casavantes, Edward Joseph

Two sets of data from the U.S. Commission on Civil Rights' Mexican American Education Study were selected for analysis in the areas of (1) comparative reading achievement rates of Mexican Americans and black students; and (2) differential in-grade retention rates of Anglo, Mexican American, and black students. Two separate issues were examined.…

Students' explanations in complex learning of disciplinary programming

Science.gov (United States)

Vieira, Camilo

Computational Science and Engineering (CSE) has been denominated as the third pillar of science and as a set of important skills to solve the problems of a global society. Along with the theoretical and the experimental approaches, computation offers a third alternative to solve complex problems that require processing large amounts of data, or representing complex phenomena that are not easy to experiment with. Despite the relevance of CSE, current professionals and scientists are not well prepared to take advantage of this set of tools and methods. Computation is usually taught in an isolated way from engineering disciplines, and therefore, engineers do not know how to exploit CSE affordances. This dissertation intends to introduce computational tools and methods contextualized within the Materials Science and Engineering curriculum. Considering that learning how to program is a complex task, the dissertation explores effective pedagogical practices that can support student disciplinary and computational learning. Two case studies will be evaluated to identify the characteristics of effective worked examples in the context of CSE. Specifically, this dissertation explores students explanations of these worked examples in two engineering courses with different levels of transparency: a programming course in materials science and engineering glass box and a thermodynamics course involving computational representations black box. Results from this study suggest that students benefit in different ways from writing in-code comments. These benefits include but are not limited to: connecting xv individual lines of code to the overall problem, getting familiar with the syntax, learning effective algorithm design strategies, and connecting computation with their discipline. Students in the glass box context generate higher quality explanations than students in the black box context. These explanations are related to students prior experiences. Specifically, students with

Linking Engineering and Medical Training: A USC program seeks to introduce medical and engineering students to medical device development.

Science.gov (United States)

Tolomiczenko, George; Sanger, Terry

2015-01-01

Medical students are attracted by the prospect of a meaningful addition to their clinical work. Engineering students are excited by a unique opportunity to learn directly alongside their medical student peers. For both, as well as the scientific community at large, the boutique program at the University of Southern California (USC) linking engineering and medical training at the graduate level is instructive of a new way of approaching engineering education that can potentially provide benefits to both students and society. Students who have grown up in an era of ?mass customization? in the retail and service industries can enjoy that same degree of flexibility also in the realm of education. At the same time, society gains engineers who have developed an increased empathy and awareness of the clinical contexts in which their innovations will be implemented.

Engineers as Information Processors: A Survey of US Aerospace Engineering Faculty and Students.

Science.gov (United States)

Holland, Maurita Peterson; And Others

1991-01-01

Reports on survey results from 275 faculty and 640 students, predominantly in the aerospace engineering field, concerning their behaviors about the appropriation and dissemination of information. Indicates that, as information processors, aerospace faculty and students are "information naive." Raises questions about the efficacy of…

Campus Climate and the Underrepresented Minority Engineering Student Experience: A Critical Race Study

Science.gov (United States)

Mayes, Terrance

In the current technological era, the number of minorities in science, technology, engineering, and mathematics (STEM) is a crucial factor in predetermining the economic growth of the United States. Since the minority population is growing at much faster rates than the non-minority population, the lack of proportionate production of minority engineers poses a threat to the United States' ability to remain a global competitor in technological innovation. Sixty-three per cent (63%) of undergraduate students who enter engineering majors continue on to graduate in that major. The graduation rate, however, for African-American, Hispanic, and Native-American students in engineering is significantly lower at 39%. As this group represents only a small fraction of the annual student enrollment, engineering programs are graduating these minority groups at rates that are greatly disproportionate to United States demographics. Therefore, researchers are thoroughly investigating certain initiatives that promote academic success among underrepresented minority students in engineering. Colleges and universities have attempted to address the growing achievement gap between underrepresented minority and non-minority engineering students, predominately through various deficit-based interventions, focusing on the student's flaws and problems. As the pipeline for minorities in engineering continues to narrow, it begs the question of whether institutions are focusing on the right solutions to the problem. Critical Race Theory scholars argue that colleges and universities must address institutional climate issues around students, such as racism, microaggressions, and marginalization, before members of oppressed groups can truly succeed. This dissertation explored the unique experiences of underrepresented minority engineering students in a predominately White and Asian campus.

Engineering design: A cognitive process approach

Science.gov (United States)

Strimel, Greg Joseph

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. Therefore, Research Objective 1 was to identify the fundamental cognitive processes students use to design, construct, and evaluate operational solutions to engineering design problems. Research Objective 2 was to determine identifiers within student cognitive processes for monitoring aptitude to successfully design, construct, and evaluate technological solutions. Lastly, Research Objective 3 was to create a conceptual technological and engineering problem-solving model integrating student cognitive processes for the improved development of problem-solving abilities. The methodology of this study included multiple forms of data collection. The participants were first given a survey to determine their prior experience with engineering and to provide a description of the subjects being studied. The participants were then presented an engineering design challenge to solve individually. While they completed the challenge, the participants verbalized their thoughts using an established "think aloud" method. These verbalizations were captured along with participant observational recordings using point-of-view camera technology. Additionally, the participant design journals, design artifacts, solution effectiveness data, and teacher evaluations were collected for analysis to help achieve the

Taub–Bolt heat engines

Science.gov (United States)

Johnson, Clifford V.

2018-02-01

It is shown that aspects of the extended thermodynamic properties of the Taub–Bolt–AdS spacetime in four dimensions are similar to those of the Schwarzschild–AdS black hole. In a high temperature expansion, the equations of state begin to deviate only at next-to-subleading orders. By analogy with what has been done for black holes, Taub–Bolt’s thermodynamic equations are used to define holographic heat engines, the first examples of gravitational heat engines defined using a spacetime that is not a black hole. As a further comparison, the Taub–Bolt engine efficiency is computed for two special kinds of engine cycle and compared to the results for analogous Schwarzschild black hole engine cycles.

Perceived Advantages and Disadvantages of Using Pre-Exposure Prophylaxis (PrEP) among Sexually Active Black Women: An Exploratory Study.

Science.gov (United States)

Bond, Keosha T; Gunn, Alana J

2016-01-01

Knowledge of pre-exposure prophylaxis (PrEP) continues to remain scarce among Black women who are disproportionally affected by HIV in the United States. A thematic analysis of open-ended questions from a sample of Black women (n=119) who completed a mix-methods, online, e-health study was conducted to examine the perceived advantages and disadvantages of using PrEP. Being a female controlled method, empowerment, option for women with risky sex partners, and serodiscordant couples were advantages described. Disadvantages of PrEP were identified as the complexity of the choice, encouragement of sex with risky partners, increased burden, promotion of unprotected sex, and newness of the drug.

What Do Final Year Engineering Students Know about Sustainable Development?

Science.gov (United States)

Nicolaou, I.; Conlon, E.

2012-01-01

This paper presents data from a project that aims to determine the level of knowledge and understanding of engineering students about sustainable development (SD). The data derive from a survey completed by final year engineering students in three Irish Higher Education Institutions. This paper is part of a larger study that examines the…

Teaching electronics to first-year non-electrical engineering students

OpenAIRE

Dahnoun, Naim

2017-01-01

Teaching electronics is not only for electrical and electronics students but also for mechanical, aerospace, engineering design, civil and engineering mathematics programmes, which are likely to have electronics units as part of their curriculum. To teach electronics for these non-electronic programmes is very challenging in many aspects. First, the electronics unit has to satisfy the learning outcomes for each programme. Second, the student's motivation is normally very low since electronics...

Houston Pre-Freshman Enrichment Program (Houston PREP). Final report, June 9, 1997--July 25, 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

The 1997 Houston Pre-Freshman Enrichment Program (PREP) was conducted at the campus of the University of Houston-Downtown from June 9 to July 25, 1997. Program participants were recruited from the Greater Houston Area. All participants were identified as high-achieving students with an interest in learning about the engineering and science professions. The goal of the program was to better prepare our pre-college youth prior to entering college as mathematics, science and engineering majors. The program participants were middle school and high school students from the Aldine, Alief, Channel View, Clear Creek, Cypress-Fairbanks, Fort Bend, Galena Park, Houston, Humble, Katy, Klein, North Forest, Pasadena, Private, and Spring Branch Independent School Districts. Of the 194 students starting the program, 165 students were from economically and socially disadvantage groups under-represented in the engineering and science professions, and 118 of the 194 were women. Our First Year group for 1997 composed of 96% minority and women students. Second and Third Year students combined were 96% minority or women. With financial support from the Center for Computational Sciences and Advanced Distributed Simulation, the Fourth Year Program was added to PREP this year. Twelve students completed the program (83% minority or women).

Attitudes towards Communication Skills among Engineering Students

Science.gov (United States)

Kovac, Mirjana M.; Sirkovic, N.

2017-01-01

Good communication skills are of utmost importance in the education of engineering students. It is necessary to promote not only their education, but also to prepare them for the demanding and competitive job market. The purpose of this study was to compare the attitudes towards communication skills after formal instruction between the students of…

A Novel Strategy to Engineer Pre-Vascularized Full-Length Dental Pulp-like Tissue Constructs.

Science.gov (United States)

Athirasala, Avathamsa; Lins, Fernanda; Tahayeri, Anthony; Hinds, Monica; Smith, Anthony J; Sedgley, Christine; Ferracane, Jack; Bertassoni, Luiz E

2017-06-12

The requirement for immediate vascularization of engineered dental pulp poses a major hurdle towards successful implementation of pulp regeneration as an effective therapeutic strategy for root canal therapy, especially in adult teeth. Here, we demonstrate a novel strategy to engineer pre-vascularized, cell-laden hydrogel pulp-like tissue constructs in full-length root canals for dental pulp regeneration. We utilized gelatin methacryloyl (GelMA) hydrogels with tunable physical and mechanical properties to determine the microenvironmental conditions (microstructure, degradation, swelling and elastic modulus) that enhanced viability, spreading and proliferation of encapsulated odontoblast-like cells (OD21), and the formation of endothelial monolayers by endothelial colony forming cells (ECFCs). GelMA hydrogels with higher polymer concentration (15% w/v) and stiffness enhanced OD21 cell viability, spreading and proliferation, as well as endothelial cell spreading and monolayer formation. We then fabricated pre-vascularized, full-length, dental pulp-like tissue constructs by dispensing OD21 cell-laden GelMA hydrogel prepolymer in root canals of extracted teeth and fabricating 500 µm channels throughout the root canals. ECFCs seeded into the microchannels successfully formed monolayers and underwent angiogenic sprouting within 7 days in culture. In summary, the proposed approach is a simple and effective strategy for engineering of pre-vascularized dental pulp constructs offering potentially beneficial translational outcomes.

Language Aspects of Engineering Students' View of Entropy

Science.gov (United States)

Haglund, Jesper; Andersson, Staffan; Elmgren, Maja

2016-01-01

Entropy is a central concept in thermodynamics, but has been found to be challenging to students due to its abstract nature and the fact that it is not part of students' everyday language. Interviews with three pairs of engineering students (N = 6) were conducted and video recorded regarding their interpretation and use of the entropy concept, one…

Academic Attitudes and Psychological Well-Being of Black American Psychology Graduate Students

Science.gov (United States)

Uqdah, Aesha L.; Tyler, Kenneth M.; DeLoach, Chante

2009-01-01

The goal of this study is to explore the relationships between academic self-concept, perception of competency in related domains, and academic motivation (intrinsic, extrinsic, and amotivation), and reported anxiety and depression among Black American psychology graduate students. The major research question asks whether there is a relationship…

Differences in Chemical Engineering Student-Faculty Interactions by Student Age and Experience at a Large, Public, Research University

Science.gov (United States)

Ciston, Shannon; Sehgal, Sanya; Mikel, Tressa; Carnasciali, Maria-Isabel

2018-01-01

Adult undergraduate students aged 25+ in engineering disciplines are an important demographic bringing a wealth of life experience to the classroom. This study uses qualitative data drawn from semi-structured interviews with two groups of undergraduate chemical engineering students at a large, public research university: adult students with…

Attitudes of Pre-Clinical and Clinical Medical Students to Psychiatry ...

African Journals Online (AJOL)

Attitudes of Pre-Clinical and Clinical Medical Students to Psychiatry. ... Nigerian Hospital Practice ... Abstract. Medical training provides an environment in which proper and professional attitudes towards psychiatric patients can be acquired.

Susceptibilities from a black hole engineered EoS with a critical point

International Nuclear Information System (INIS)

Portillo, Israel

2017-01-01

Currently at the Beam Energy Scan at RHIC experimental efforts are being made to find the QCD critical point. On the theoretical side, the behavior of higher-order susceptibilities of the net-baryon charge from Lattice QCD at µ B = 0 may allow us to estimate the position of the critical point in the QCD phase diagram. However, even if the series expansion continues to higher-orders, there is always the possibility to miss the critical point behavior due to truncation errors. An alternative approach is to use a black hole engineered holographic model, which displays a critical point at large densities and matches lattice susceptibilities at µB = 0. Using the thermodynamic data from this black hole model, we obtain the freeze-out points extracted from the net-protons distribution measured at STAR and explore higher order fluctuations at the lowest energies at the beam energy scan to investigate signatures of the critical point. (paper)

MODERN OR TRADITIONAL TEACHING STRATEGY IN LEARNING ENGINEERING MATHEMATICS COURSE

Directory of Open Access Journals (Sweden)

N. RAZALI

2016-11-01

Full Text Available First-year engineering students of the Faculty of Engineering and Built Environment, UKM are in the process of transition in the way they learn mathematics from pre-university level to the undergraduate level. It is essential for good engineers to have the ability to unfold mathematical problems in an efficient way. Thus, this research is done to investigate students preference in learning KKKQ1123 Engineering Mathematics I (Vector Calculus (VC course; either individually or in a team; using modern (e-learning or traditional (cooperative-learning teaching strategy. Questionnaires are given to the first year Chemical and Process Engineering students from academic year 2015/2016 and the results were analysed. Based on the finding, the students believed that the physical educators or teachers play an important role and that they have slightest preference in the traditional teaching strategy to learn engineering mathematics course.

Pre-college education

Science.gov (United States)

Stein, Sylvia

1990-01-01

Pre-college education efforts are many and varied, involving the teachers, students, parents, museums, and youth groups. However, it is necessary to reach out to school administration at all levels if teachers are to be innovative in their approaches. This introductory meeting clearly indicated that more interaction between the participants would be profitable. It is clear that the science pipeline leading from kindergarten to college entry needs to be filled with students. What is not clear is how we can do it. The plethora of projects being pursued by the NASA Space Grant College Fellowship (NSGC) programs to accomplish that goal are heartening and exciting. However, this large gamut of programs may also indicate how new we are in this game and how little anyone knows about creating a pre-college interest in science and engineering. In a way, it resembles the situation of the common cold--there is no known cure yet, so there are many so-called remedies. Unfortunately, the time we had together was entirely too short to address the evaluation situation, so that we can in the future zero in on the most effective approaches. This report is a summary of the many ways the different NSGC' s are approaching pre-college education and a list of suggestions.

The Intersection of Gender and Race: Exploring Chemical Engineering Students' Attitudes

Science.gov (United States)

Goodwin, Allison; Verdín, Dina; Kirn, Adam; Satterfield, Derrick

2018-01-01

We surveyed 342 first-year engineering students at four U.S. institutions interested in a chemical engineering career about their feelings of belonging in engineering, motivation, and STEM identities. We compared these students by both gender and race/ethnicity on these attitudinal factors. We found several significant differences in…

Influencing Student Beliefs about the Role of the Civil Engineer in Society

Science.gov (United States)

Nesbit, Susan E.; Sianchuk, Robert; Aleksejuniene, Jolanta; Kindiak, Rebecca

2012-01-01

This study suggests that community service learning experiences facilitate the reconstruction of civil engineering student beliefs about both the type of work performed by civil engineers and the broad impact of civil engineering knowledge. Further, the service learning experiences highlight for students 1) the importance of relationships between…

Gauging Workplace Readiness: Assessing the Information Needs of Engineering Co-op Students

Science.gov (United States)

Jeffryes, Jon; Lafferty, Meghan

2012-01-01

Librarians at the Science and Engineering Library at the University of Minnesota surveyed engineering students participating in a work placement as part of the cooperative education program. The survey asked about students' on-the-job information usage, comfort level accessing different types of engineering literature, and experience learning to…

Pre-Service Science Teachers' PCK: Inconsistency of Pre-Service Teachers' Predictions and Student Learning Difficulties in Newton's Third Law

Science.gov (United States)

Zhou, Shaona; Wang, Yanlin; Zhang, Chunbin

2016-01-01

There is widespread agreement that science learning always builds upon students' existing ideas and that science teachers should possess knowledge of learners. This study aims at investigating pre-service science teachers' knowledge of student misconceptions and difficulties, a crucial component of PCK, on Newton's Third Law. A questionnaire was…

Then and Now: Black Boycott in Waterloo.

Science.gov (United States)

Anderson, Ruth B.

1983-01-01

Discusses events following the desegregation of Waterloo, Iowa, schools. Describes the 1978 Black boycott of Hoover Junior High, which led to improvements in the treatment of Black students. Lists administrative responses to each Black grievance, and presents interviews with ten Black students three years after the boycott. (KH)

The Influence of Toy Design Activities on Middle School Students' Understanding of the Engineering Design Processes

Science.gov (United States)

Zhou, Ninger; Pereira, Nielsen L.; George, Tarun Thomas; Alperovich, Jeffrey; Booth, Joran; Chandrasegaran, Senthil; Tew, Jeffrey David; Kulkarni, Devadatta M.; Ramani, Karthik

2017-10-01

The societal demand for inspiring and engaging science, technology, engineering, and mathematics (STEM) students and preparing our workforce for the emerging creative economy has necessitated developing students' self-efficacy and understanding of engineering design processes from as early as elementary school levels. Hands-on engineering design activities have shown the potential to promote middle school students' self-efficacy and understanding of engineering design processes. However, traditional classrooms often lack hands-on engineering design experiences, leaving students unprepared to solve real-world design problems. In this study, we introduce the framework of a toy design workshop and investigate the influence of the workshop activities on students' understanding of and self-efficacy beliefs in engineering design. Using a mixed method approach, we conducted quantitative analyses to show changes in students' engineering design self-efficacy and qualitative analyses to identify students' understanding of the engineering design processes. Findings show that among the 24 participants, there is a significant increase in students' self-efficacy beliefs after attending the workshop. We also identified major themes such as design goals and prototyping in students' understanding of engineering design processes. This research provides insights into the key elements of middle school students' engineering design learning and the benefits of engaging middle school students in hands-on toy design workshops.

Students' Attitudes and Enrollment Trends in Physics and Engineering

Science.gov (United States)

Banjong, Delphine

Science, Technology, Engineering, and Mathematics (STEM) fields are critical for meeting ever-increasing demands in the U.S. for STEM and related skills, and for ensuring the global competitiveness of the United States in technological advancement and scientific innovation. Nonetheless, few U.S. students consider a STEM degree after high school and fewer STEM students end up graduating with a STEM degree. In 2012, the United States ranked 35th in math and 27th in science out of 64 participating countries in the Program for International Student Assessment (PISA), sponsored by the Organization for Economic Cooperation and Development (OECD). Considering the significant role physics and engineering play in technological advancement, this work investigates the attitudes of students and recent enrollment trends in these important subject areas.

An exploration of students' perceptions and attitudes towards creativity in engineering education

Science.gov (United States)

Waller, David R.

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged

Engineering Student's Ethical Awareness and Behavior: A New Motivational Model.

Science.gov (United States)

Bairaktarova, Diana; Woodcock, Anna

2017-08-01

Professional communities are experiencing scandals involving unethical and illegal practices daily. Yet it should not take a national major structure failure to highlight the importance of ethical awareness and behavior, or the need for the development and practice of ethical behavior in engineering students. Development of ethical behavior skills in future engineers is a key competency for engineering schools as ethical behavior is a part of the professional identity and practice of engineers. While engineering educators have somewhat established instructional methods to teach engineering ethics, they still rely heavily on teaching ethical awareness, and pay little attention to how well ethical awareness predicts ethical behavior. However the ability to exercise ethical judgement does not mean that students are ethically educated or likely to behave in an ethical manner. This paper argues measuring ethical judgment is insufficient for evaluating the teaching of engineering ethics, because ethical awareness has not been demonstrated to translate into ethical behavior. The focus of this paper is to propose a model that correlates with both, ethical awareness and ethical behavior. This model integrates the theory of planned behavior, person and thing orientation, and spheres of control. Applying this model will allow educators to build confidence and trust in their students' ability to build a professional identity and be prepared for the engineering profession and practice.

Mimewrighting: Preparing Students for the Real World of Science, Technology, Engineering, and Math

Science.gov (United States)

Shope, R. E.

2013-12-01

READING, WRITING, & ENACTING SCIENTIFIC & TECHNICAL LITERATURE: Mimewrighting applies the art of mime as an interpretive springboard to integrate conceptual understanding across all content areas. Mimewrighting guides students to read and express complex ideas in carefully crafted movement integrations, mediating experience, so that students obtain an intuitive grasp of difficult and abstract ideas. THE PROBLEM: Reading science writing presents obstacles for middle and high school students, to the point that many students are turned OFF to science altogether. A typical science abstract, written for colleagues, is as densely packed with concept-laden words as a black hole is densely packed with matter- and just as mysterious. What reads to a science colleague as a richly crafted paragraph, from which a myriad of elegantly interrelated concepts can unfold to point to the significance and context of the study at hand, reads as jabberwocky nonsense to the uninitiated student. So, how do we turn such kids (and teachers) back ON to the inquiry-driven desire to seek out challenging and educative experiences? How do we step up to the national challenge to prepare ALL students adequately for the REAL-WORLD demands of science, technology, engineering, math, (STEM) and communications? How do we help kids read, write, and understand scientific and technical literature? AN UNCONVENTIONAL ANSWER: Mimewrighting applies the classic art of mime to unpack the meaning of science writing. We help students view the text as sequences of action, scenarios that can be enacted theatrically for understanding. HOW DOES IT WORK? READ ALOUD, MIME ALONG: It's as simple as read aloud and mime along. And as complex, in that it requires taking the time to acknowledge each concept packed into the passage. Three opening sentences might involve twenty minutes of mimewrighting activity to ensure that students apprehend the patterns, perceive the relationships, and comprehend the dynamics of such a

The Humanistic Side of Engineering: Considering Social Science and Humanities Dimensions of Engineering in Education and Research

OpenAIRE

Hynes, Morgan; Swenson, Jessica

2013-01-01

Mathematics and science knowledge/skills are most commonly associated with engineering’s pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the humanistic side of engineering with illustrative examples of what appealing to the humanistic side of engineering can look like in a classroom setting, a...

Undergraduate Engineers and Teachers: Can Students Be Both?

Science.gov (United States)

Zarske, Malinda S.; Vadeen, Maia L.; Tsai, Janet Y.; Sullivan, Jacquelyn F.; Carlson, Denise W.

2017-01-01

Today's college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of…

Teaching Process Engineering Principles Using an Ice Cream Maker

Science.gov (United States)

Kaletunc, Gonul; Duemmel, Kevin; Gecik, Christopher

2007-01-01

The ice cream laboratory experiment is designed to illustrate and promote discussion of several engineering and science topics including material and energy balances, heat transfer, freezing, mass transfer, mixing, viscosity, and freezing point depression in a sophomore level engineering class. A pre-lab assignment requires the students to develop…

Engineering Ethics : The Second Report on Student Awareness and Course Methodology

Science.gov (United States)

Abe, Takao; Hachimori, Akira; Honywood, Michael

This paper is the second one detailing the findings of a questionnaire survey administered to gauge respondents' awareness of engineering ethics. The survey was carried out with the cooperation of Japanese, South Korean, and Chinese universities as well as a number of Japanese corporations. Our findings indicate that while students and company employees alike generally exhibit an appetite for learning about engineering ethics, South Korean and Chinese students have adopted a posture that is more conducive to such study than their Japanese counterparts. We also discovered a number of other differences rooted in students' nationality. Engineering ethics content seems to receive little attention in corporate training programs. Small and medium size companies in particular may not be addressing questions of engineering ethics in an aggressive manner.

CONCEPT AND MODELS FOR EVALUATION OF BLACK AND WHITE SMOKE COMPONENTS IN DIESEL ENGINE EXHAUST

Directory of Open Access Journals (Sweden)

Igor BLYANKINSHTEIN

2017-09-01

Full Text Available A method for measuring exhaust smoke opacity has been developed, which allows estimating the differentiated components forming black exhaust and those forming white smoke. The method is based on video recording and special software for processing the video recording data. The flow of the diesel exhaust gas is visualised using the digital camera, against the background of the screen, on a cut of an exhaust pipe, and with sufficient illumination of the area. The screen represents standards of whiteness and blackness. The content of the black components (soot is determined by the degree of blackening of the white standard in the frames of the video, and the content of whitish components (unburned fuel and oil, etc. is determined by the degree of whitening of black standard on the frames of the video. The paper describes the principle and the results of testing the proposed method of measuring exhaust smoke opacity. We present an algorithm for the frame-by-frame analysis of the video sequence, and static and dynamic mathematical models of exhaust opacity, measured under free-acceleration of a diesel engine.

A Study to Investigate the Consumer Behavior and Cultural Dimensions of Engineering Students in Pakistan

Directory of Open Access Journals (Sweden)

FARYAL SALMAN SALMAN

2016-10-01

Full Text Available The current study compares consumer behavior and Cultural Orientations between engineering and non-engineering students in Pakistan. Engineering students by virtue of their academic background are considered to have more technical know-how, more cognitive skills and can easily learn and adopt a new technology as compared to students from a non-engineering background. Furthermore the researchers were interested to find out that how the thinking skills and choice making of engineering students differ from other students and ultimately effects their consumer behavior and Cultural Dimensions. For this purpose three consumer behavior variables have been selected that are Customer Satisfaction, Customer Loyalty and Customer Switching. Cultural Dimensions are measured using the model proposed by Geert Hofstede. Two technologically sophisticated services are used in this study that is Mobile Phone and Debit Cards. The target population of the study consisted of 5000 students of which approximately 500 respondents were from various engineering universities in Pakistan. The comparison of consumer behavior and Cultural Dimensions differences was made through two group?s Discriminant Analysis. Differences in behavior and Cultural Dimensions have been reported among the engineering versus non-engineering students. Mobile Phone services satisfaction and loyalty were high among nonengineering students whereas engineering student?s registered higher satisfaction and loyalty in Debit Card services. Another interesting finding is difference in switching behavior. In case of both the servicesengineering students reported a higher mean score for switching. Score for Cultural Dimensions were also different among the two students type; whereby mean score for Masculinity

An Engineering Research Program for High School Science Teachers: Year Two Changes and Results

Science.gov (United States)

DeJong, Brian P.; Yelamarthi, Kumar; Kaya, Tolga

2016-01-01

The research experiences for teachers program at Central Michigan University was initiated to team in-service and pre-service teachers with undergraduate engineering students and engineering faculty, in an engineering research setting. During the six-week program, teachers learn engineering concepts and develop high-school instructional material…

Assessing students' performance in software requirements engineering education using scoring rubrics

Science.gov (United States)

Mkpojiogu, Emmanuel O. C.; Hussain, Azham

2017-10-01

The study investigates how helpful the use of scoring rubrics is, in the performance assessment of software requirements engineering students and whether its use can lead to students' performance improvement in the development of software requirements artifacts and models. Scoring rubrics were used by two instructors to assess the cognitive performance of a student in the design and development of software requirements artifacts. The study results indicate that the use of scoring rubrics is very helpful in objectively assessing the performance of software requirements or software engineering students. Furthermore, the results revealed that the use of scoring rubrics can also produce a good achievement assessments direction showing whether a student is either improving or not in a repeated or iterative assessment. In a nutshell, its use leads to the performance improvement of students. The results provided some insights for further investigation and will be beneficial to researchers, requirements engineers, system designers, developers and project managers.

Cross-Cultural Communication Training for Students in Multidisciplinary Research Area of Biomedical Engineering

Directory of Open Access Journals (Sweden)

Shigehiro Hashimoto

2014-08-01

Full Text Available Biomedical Engineering makes multidisciplinary research area, which includes biology, medicine, engineering and others. Communication training is important for students, who have a potential to develop Biomedical Engineering. Communication is not easy in a multidisciplinary research area, because each area has its own background of thinking. Because each nation has its own background of culture, on the other hand, international communication is not easy, either. A cross-cultural student program has been designed for communication training in the multidisciplinary research area. Students from a variety of backgrounds of research area and culture have joined in the program: mechanical engineering, material science, environmental engineering, science of nursing, dentist, pharmacy, electronics, and so on. The program works well for communication training in the multidisciplinary research area of biomedical engineering. Foreign language and digital data give students chance to study several things: how to make communication precisely, how to quote previous data. The experience in the program helps students not only understand new idea in the laboratory visit, but also make a presentation in the international research conference. The program relates to author's several experiences: the student internship abroad, the cross-cultural student camp, multi PhD theses, various affiliations, and the creation of the interdisciplinary department.

The Achievement Gap: Factors That Influenced the Achievement of Successful Black Students

Science.gov (United States)

Morton, Kwame R., Sr.

2011-01-01

The academic underperformance of Black students when compared to their White peers has confounded educators nationwide. This discrepancy in academic performance commonly referred to as the achievement gap has become a national crisis which has led to one of the most significant educational reforms undertaken in the United States of America in the…

An Arts-Based Instructional Model for Student Creativity in Engineering Design

Directory of Open Access Journals (Sweden)

Brian Laduca

2017-02-01

Full Text Available Over the past twenty years, nearly all job growth in the United States has emerged from new companies and organizations with assumedly innovative products, services, and practices. Yet, the nurturing of student creative thinking and problem solving is infrequent in engineering education. Inherent to developing these creativity skills and attributes is the need to be exposed to difference — in people and environment. Engineering education rarely offers such opportunities. Additionally, engineering students are rarely presented opportunities to develop designs responding to real human problems. This paper puts forth a new instructional model to address these needs by utilizing arts processes and practices as catalysts for both creativity development in students and transdisciplinary collaboration on problems addressing deep human needs. This model is premised on the substantiated role of the arts in developing creativity and growing understanding of the human condition. This art-based instructional model was piloted as exploratory pedagogical research during the summers of 2015 and 2016 as a partnership between the Arts Nexus (IAN and the School of Engineering at the University of Dayton. In each year, this program supported twelve student interns from engineering, business, science, the arts, and the humanities to develop innovative technologies and services meeting client needs. Student growth in creative problem-solving and transdisciplinary collaboration, as well as the success of the completed innovation technology prototype were assessed by the project mentors and participating students via survey evaluations and narrative responses. The assessment results revealed substantial student growth in student creativity and transdisciplinary collaboration and a remarkably strong evaluation of the success of the students’ innovations. Also realized for all students was a transformation in their perception of their place in the world as

CROSSECTIONAL STUDY OF PREVALENCE OF DYSMENORRHEA AND PRE MENSTRUAL SYNDROME IN COLLEGE STUDENTS

Directory of Open Access Journals (Sweden)

Joylene Diana

2015-07-01

Full Text Available Dysmenorrhea or pain during menstruation is the most common gynaecological complaint among adolescents and college students. A good majority of patients with dysmenorrhea also experience pre - menstrual symptoms ( PMS . The objective of this cross s ectional study was to assess prevalence of dysmennorhea , PMS , college absenteeism and knowledge attitudes and practices relating to the same among college going students between the age of 18 to 26 years. METHODS: A cross s ectional analysis of a total of 420 students using questionnaires related to dysmenorrhea was done . The questionnaire dealt with the regularity of menstrual cycles , occurrence of dysmenorrhea , college absenteeism , premenstrual symptoms and lifestyle attributes of the students. RESULTS: The prevalence of dysmenorrhea of varying degrees was found to be as high as 97 percent . Dysmennorhea was seen in 45.8 percent of students with regular cycles and 97.7 percent of students with irregular cycles. 47.5 percentage of students missed their college working days due to menstruation related complaints. Among the students who had pre - menstrual syndrome , majority of them revealed life style attributes like eating fast food and also consuming over the counter pain medicines. Also psychological and emotional changes were commonly seen during the premenstrual phase. CONCLUSION: This study showed that though dysmennorhea of varying degrees is widely prevalent among college going students , the prevalence of pre - menstrual syndrome was higher. The study suggests that adequate counseling and education about menstrual symptoms and abuse of OTC analgesics if made a part of college curriculum as well as lifestyle modifications could come a long way in helping to alleviate the problems college students face due to dysmennorhea and PMS.

Women Engineering Transfer Students: The Community College Experience

Science.gov (United States)

Patterson, Susan J.

2011-01-01

An interpretative philosophical framework was applied to a case study to document the particular experiences and perspectives of ten women engineering transfer students who once attended a community college and are currently enrolled in one of two university professional engineering programs. This study is important because women still do not earn…

Ethnic Comparisons in HIV Testing Attitudes, HIV Testing, and Predictors of HIV Testing Among Black and White College Students.

Science.gov (United States)

Moore, Melanie P; Javier, Sarah J; Abrams, Jasmine A; McGann, Amanda Wattenmaker; Belgrave, Faye Z

2017-08-01

This study's primary aim was to examine ethnic differences in predictors of HIV testing among Black and White college students. We also examined ethnic differences in sexual risk behaviors and attitudes toward the importance of HIV testing. An analytic sample of 126 Black and 617 White undergraduatestudents aged 18-24 were analyzed for a subset of responses on the American College Health Association-National College Health Assessment II (ACHA-NCHA II) (2012) pertaining to HIV testing, attitudes about the importance of HIV testing, and sexual risk behaviors. Predictors of HIV testing behavior were analyzed using logistic regression. t tests and chi-square tests were performed to access differences in HIV test history, testing attitudes, and sexual risk behaviors. Black students had more positive attitudes toward testing and were more likely to have been tested for HIV compared to White students. A greater number of sexual partners and more positive HIV testing attitudes were significant predictors of HIV testing among White students, whereas relationship status predicted testing among Black students. Older age and history of ever having sex were significant predictors of HIV testing for both groups. There were no significant differences between groups in number of sexual partners or self-reports in history of sexual experience (oral, vaginal, or anal). Factors that influence HIV testing may differ across racial/ethnic groups. Findings support the need to consider racial/ethnic differences in predictors of HIV testing during the development and tailoring of HIV testing prevention initiatives targeting college students.

Sleep disorders in high school and pre-university students.

Science.gov (United States)

Rocha, Célia R S; Rossini, Sueli; Reimão, Rubens

2010-12-01

Adolescence is a period in which youngsters have to make choices such as applying for university. The selection process is competitive, and it brings distress and anxiety, risk factors for the appearance of sleep disorders. To verify the occurrence of sleep disorders in third-year high school and pre-university students. This cross-sectional descriptive study comprised a sample of 529 students (M=241, F=288) from three public schools, four private schools and two pre-university courses - a middle-class neighborhood in the city of São Paulo - aged between 16 and 19 years old. We used the Pittsburgh Sleep Quality Index (PSQI) - a standardized questionnaire. The participants (52.9%) took about 30 minutes to fall asleep, with an average of 306.4 minutes asleep, moderate daytime sleepiness (n=243, 45.9%) and indisposition (n=402, 75.9%) to develop the activities. The scores (M and F) were similar regarding problems that affect sleep. The investigated population showed sleep disorders and poor sleep quality.

Willingness to use pre-exposure prophylaxis among Black and White men who have sex with men in Atlanta, Georgia.

Science.gov (United States)

Rolle, Charlotte-Paige; Rosenberg, Eli S; Luisi, Nicole; Grey, Jeremy; Sanchez, Travis; Del Rio, Carlos; Peterson, John L; Frew, Paula M; Sullivan, Patrick S; Kelley, Colleen F

2017-08-01

PrEP willingness may be different among black and white men who have sex with men (MSM) given known disparities in HIV incidence, sociodemographic factors, and healthcare access between these groups. We surveyed 482 black and white HIV-negative MSM in Atlanta, GA about their willingness to use pre-exposure prophylaxis (PrEP) and facilitators and barriers to PrEP willingness. Overall, 45% (215/482) of men indicated interest in using PrEP. Engaging in recent unprotected anal intercourse (UAI) was the only factor significantly associated with PrEP willingness in multivariate analyses (OR 1.73, 95% CI 1.13, 2.65). Willing men identified "extra protection" against HIV as the most common reason for interest in using PrEP, whereas unwilling men most commonly cited not wanting to take medication daily, and this reason was more common among white MSM (42.3% of white MSM vs. 28.9% of black MSM, p = 0.04). Most men indicated willingness to use PrEP if cost was <50 dollars/month; however, more black MSM indicated willingness to use PrEP only if cost were free (17.9% of white MSM vs. 25.9% of black MSM, p = 0.03). Overall, these data are useful to scale up PrEP interventions targeting at-risk MSM in Atlanta and highlight the need for implementation of low cost-programs, which will be especially important for black MSM.

Predictive validity of pre-admission assessments on medical student performance.

Science.gov (United States)

Dabaliz, Al-Awwab; Kaadan, Samy; Dabbagh, M Marwan; Barakat, Abdulaziz; Shareef, Mohammad Abrar; Al-Tannir, Mohamad; Obeidat, Akef; Mohamed, Ayman

2017-11-24

To examine the predictive validity of pre-admission variables on students' performance in a medical school in Saudi Arabia. In this retrospective study, we collected admission and college performance data for 737 students in preclinical and clinical years. Data included high school scores and other standardized test scores, such as those of the National Achievement Test and the General Aptitude Test. Additionally, we included the scores of the Test of English as a Foreign Language (TOEFL) and the International English Language Testing System (IELTS) exams. Those datasets were then compared with college performance indicators, namely the cumulative Grade Point Average (cGPA) and progress test, using multivariate linear regression analysis. In preclinical years, both the National Achievement Test (p=0.04, B=0.08) and TOEFL (p=0.017, B=0.01) scores were positive predictors of cGPA, whereas the General Aptitude Test (p=0.048, B=-0.05) negatively predicted cGPA. Moreover, none of the pre-admission variables were predictive of progress test performance in the same group. On the other hand, none of the pre-admission variables were predictive of cGPA in clinical years. Overall, cGPA strongly predict-ed students' progress test performance (p<0.001 and B=19.02). Only the National Achievement Test and TOEFL significantly predicted performance in preclinical years. However, these variables do not predict progress test performance, meaning that they do not predict the functional knowledge reflected in the progress test. We report various strengths and deficiencies in the current medical college admission criteria, and call for employing more sensitive and valid ones that predict student performance and functional knowledge, especially in the clinical years.

A course for developing interprofessional skills in pre-professional honor students using humanities and media.

Science.gov (United States)

Poirier, Therese I; Stamper-Carr, Connie; Newman, Kate

2017-09-01

To design and implement an undergraduate honors course for pre-health professional students that develops interpersonal skills through use of a variety of humanities. A three credit hour course in an honors seminar sequence was developed by pharmacy practice faculty and with input from faculty in mass communications, philosophy, applied communication studies and history. The course utilized a variety of media such as literature, film, and podcasts to foster student discussion about a variety of health-related topics. Topics included public health, stigmatization, portrayals of health care providers, patient experiences, health care ethics, aging, and death and dying. Students were assessed using pre-class assignments and reflective writings as well as a formal written and oral presentation on a selected health-related book. A quasi-experimental design was used to assess the impact of the course on desired course outcomes. The first course offering was to 22 undergraduate pre-health professional honors students. Pre- and post-course surveys on students' perceptions and students' reflective writings revealed achievement of desired course outcomes. Post-course evaluations also revealed positive perceptions about the course. The design of this course provided an outlet for students to read and enjoy various forms of media, while also meeting its goal of exposing students to a variety of humanities. The course allowed students to think critically about various health care issues, and to begin to develop interpersonal skills. The course could be adapted for pharmacy by developing affective domains of the Accreditation Council for Pharmacy Education (ACPE) Standards. Copyright © 2017 Elsevier Inc. All rights reserved.

Engineering Students' Conceptions of Entrepreneurial Learning as Part of Their Education

Science.gov (United States)

Täks, Marge; Tynjälä, Päivi; Kukemelk, Hasso

2016-01-01

The purpose of this study was to examine what kinds of conceptions of entrepreneurial learning engineering students expressed in an entrepreneurship course integrated in their study programme. The data were collected during an entrepreneurship course in Estonia that was organised for fourth-year engineering students, using video-recorded group…

Appropriate Programs for Foreign Students in U.S. Chemical Engineering Curricula.

Science.gov (United States)

Findley, M. E.

Chemical engineers in developing countries may need abilities in a number of diverse areas including management, planning, chemistry, equipment, processes, politics, and improvisation. Chemical engineering programs for foreign students can be arranged by informed advisers with student input for inclusion of some of these areas in addition to…

An intercept study to measure the extent to which New Zealand university students pre-game.

Science.gov (United States)

Riordan, Benjamin C; Conner, Tamlin S; Flett, Jayde A M; Droste, Nic; Cody, Louise; Brookie, Kate L; Riordan, Jessica K; Scarf, Damian

2018-02-01

We aimed to quantify the degree to which students pre-gamed in New Zealand, using self-report and breathalysers. A total of 569 New Zealand undergraduate students were interviewed (men = 45.2%; first year = 81.4%) entering three university-run concerts. We asked participants to report how many drinks they had consumed, their self-reported intoxication and the duration of their pre-gaming session. We then recorded participants' Breath Alcohol Concentration (BrAC; µg/L) and the time they arrived at the event. The number of participants who reported consuming alcohol before the event was 504 (88.6%) and the number of standard drinks consumed was high (M=6.9; median=6.0). A total of 237 (41.7%) participants could not have their BrAC recorded due to having consumed alcohol ≤10 minutes before the interview. The remaining 332 participants (57.3%) recorded a mean BrAC of 288.8µg/L (median=280.0 µg/L). Gender, off-campus accommodation, length of pre-gaming drinking session, and time of arrival at the event were all associated with increased pre-gaming. Conclusion and implications for public health: Pre-gaming was the norm for students. Universities must take pre-gaming into account; policy implications include earlier start times of events and limiting students' access to alcohol prior to events. © 2017 The Authors.

Improving innovation and multidisciplinary competences among bachelor of engineering students

DEFF Research Database (Denmark)

Løje, Hanne; Andersson, Pernille Hammar; Grex, Sara

2017-01-01

within Engineering Education. Furthermore, there is also a demand for the graduates to be able to work multidisciplinary and to be able to use generic skills in their work. In this paper, the research question is how to enhance innovation and multidisciplinary competences of engineering students......From society and industry, there are increasing requirements for skilled and well-educated engineers who can develop new solutions through innovation and this have pushed universities to meet these requirements by having an increasing focus on developing innovation and entrepreneurship programmes......? This is a central question in order to educate engineers that can create sustainable solutions for the environment, for products and to secure future workplaces. In this paper, a new mandatory course for Bachelor of Engineering students at the Technical University of Denmark (DTU) "Innovation Pilot...

Assessing Students' Motivation to Engage in Sustainable Engineering

Science.gov (United States)

McCormick, Mary; Bielefeldt, Angela R.; Swan, Christopher W.; Paterson, Kurtis G.

2015-01-01

Purpose: The purpose of this study was to design an assessment instrument to evaluate students' attitudes toward sustainable engineering (SE). Factors that impact SE beliefs could then be explored. Design/methodology/approach: Using the definition of sustainability from the Brundtland report and expectancy value theory, students' sentiment toward…

Students' Perceptions of a Highly Controversial yet Keystone Species, the Black-Tailed Prairie Dog: A Case Study

Science.gov (United States)

Fox-Parrish, Lynne; Jurin, Richard R.

2008-01-01

The authors used a case-study methodology to explore the perceptions of 30 9th-grade biology students relative to black-tailed prairie dogs. The case study, which involved classroom- and field-based experiences that focused on black-tailed prairie dogs, revealed 3 major themes: apathy, egocentrism, and naive conceptions. The authors had hoped that…

Student-inspired activities for the teaching and learning of engineering ethics.

Science.gov (United States)

Alpay, E

2013-12-01

Ethics teaching in engineering can be problematic because of student perceptions of its subjective, ambiguous and philosophical content. The use of discipline-specific case studies has helped to address such perceptions, as has practical decision making and problem solving approaches based on some ethical frameworks. However, a need exists for a wider range of creative methods in ethics education to help complement the variety of activities and learning experiences within the engineering curriculum. In this work, a novel approach is presented in which first-year undergraduate students are responsible for proposing ethics education activities of relevance to their peers and discipline area. The students are prepared for the task through a short introduction on engineering ethics, whereby generic frameworks for moral and professional conduct are discussed, and discipline and student-relevance contexts provided. The approach has been used in four departments of engineering at Imperial College London, and has led to the generation of many creative ideas for wider student engagement in ethics awareness, reflection and understanding. The paper presents information on the premise of the introductory sessions for supporting the design task, and an evaluation of the student experience of the course and task work. Examples of proposals are given to demonstrate the value of such an approach to teachers, and ultimately to the learning experiences of the students themselves.

The Spaces between Us: A Queer?Intersectional Analysis of the Narratives of Black Gay International Students

Science.gov (United States)

Hubain, Bryan S.

2017-01-01

The experiences of international students along the lines of race and ethnicity, sexuality, gender, and nationality are virtually unknown. This study utilizes experience-centered narrative inquiry to explore the experiences of Black gay international students, and how they are racialized and sexualized in American higher education. Using a Queer…

The Use of Pre-Recorded Lectures on Student Performance in Physiology

Science.gov (United States)

Hadgu, Rim Mekonnen; Huynh, Sophia Hoang-Vy; Gopalan, Chaya

2016-01-01

There has been an increase in reliance on pre-recorded lectures (PRL) as a source of learning in place of live-lectures (LL) in higher education today but whether PRL can effectively replace LL remains unknown. We tested how students performed in the exam questions when PRL replaced LL. While PRL+ group included those students who watched the…

Stereotype Threat: A Qualitative Study of the Challenges Facing Female Undergraduate Engineering Students

Science.gov (United States)

Entsminger, J. R., II

From a sociocultural point of view, this qualitative case study explored how upper-level, female undergraduate engineering students perceived the possibility of or experience with stereotype threat as shaping their experiences. The study also investigated how these students explained their reasons for choosing their engineering major, the challenges they encountered in the major, and their reasons for persevering in spite of those challenges. Using Steele and Aronson's (1995) stereotype threat theory as a framework, and considering the documented underrepresentation of females in engineering, the study sought to examine how stereotype threat shaped the experiences of these students and if stereotype threat could be considered a valid reason for the underrepresentation. The study was conducted at a large, four-year public university. First, students in the College of Engineering and Engineering Technology completed the Participant Screening Survey. Based on responses from the survey, six female engineering students from the college were identified and invited to participate in the study. The participants came from the following majors: Electrical Engineering, Industrial and Systems Engineering, and Mechanical Engineering. After receiving the study consent letter and agreeing to participate, the students were involved in a 90-minute focus group meeting, a 45-minute one-on-one interview, and a 30-minute follow-up interview. After conducting the data collection methods, the data were then transcribed, analyzed, and coded for theme development. The themes that emerged coincided with each research question. The themes highlighted the complex interactions and experiences shared by the female engineering majors. The female students were enveloped in an environment where there existed an increased risk for activating stereotype threat. In addition, the female students described feeling pushed to prove to themselves and to others that the negative stereotype that 'females

Mathematics Education for Engineering Technology Students – A Bridge Too Far?

Directory of Open Access Journals (Sweden)

Noraishiyah Abdullah

2013-03-01

Full Text Available Trying to decide what is best suited for someone or something is an ever enduring task let alone trying to prepare students with the right engineering mind. So ‘how do you build an engineer?’ if that is the right word. What is the right ingredient? Mathematics has been said as the most important foundation in engineers’ life. Curriculum has been developed and reviewed over the years to meet this target. This work explores how much or lack of it has the curriculum prepares the future technologist to face the world of engineering technology as far as mathematics is concerned. Analysis of mathematics lectures, interviews of engineering technologist students and engineering technology subject lecturer is undertaken. Understand what each contributes help in understanding the picture that the current education is painting. Based on the theory of learning, APOS theory helps in explaining how students bridge their knowledge of mathematics when it comes to solving engineering technology problems. The question is, is it a bridge too far? 

Shedding light on the subject: introduction to illumination engineering and design for multidiscipline engineering students

Science.gov (United States)

Ronen, Ram S.; Smith, R. Frank

1995-10-01

Educating engineers and architects in Illumination Engineering and related subjects has become a very important field and a very satisfying and rewarding one. Main reasons include the need to significantly conserve lighting energy and meet government regulations while supplying appropriate light levels and achieving aesthetical requirements. The proliferation of new lamps, luminaries and lighting controllers many of which are 'energy savers' also helps a trend to seek help from lighting engineers when designing new commercial and residential buildings. That trend is believed to continue and grow as benefits become attractive and new government conservation regulations take affect. To make things even better one notices that Engineering and Science students in most disciplines make excellent candidates for Illumination Engineers because of their background and teaching them can move ahead at a brisk pace and be a rewarding experience nevertheless. In the past two years, Cal Poly Pomona College of Engineering has been the beneficiary of a DOE/California grant. Its purpose was to precipitate and oversee light curricula in various California community colleges and also develop and launch an Illumination Engineering minor at Cal Poly University. Both objectives have successfully been met. Numerous community colleges throughout California developed and are offering a sequence of six lighting courses leading to a certificate; the first graduating class is now coming out of both Cypress and Consumnes Community Colleges. At Cal Poly University a four course/laboratory sequence leading to a minor in Illumination Engineering (ILE) is now offered to upper division students in the College of Engineering, College of Science and College of Architecture and Design. The ILE sequence will briefly be described. The first course, Introduction to Illumination Engineering and its laboratory are described in more detail alter. Various methods of instruction including lectures, self work

COMPETENCE CRITERIA OF TEACHERS AT BLENDED LEARNING OF ENGINEERING STUDENTS

Directory of Open Access Journals (Sweden)

Kateryna A. Ivanova

2017-09-01

Full Text Available The work is devoted to the definition of competence criteria of teachers in the mixed (hybrid education of engineering students. The study was conducted based on generalization of known competence criteria of teachers of traditional education and analysis of publications of domestic and foreign authors devoted to the problems of mixed education. The competence criteria of the teachers in mixed training of engineering students were proposed, an expert evaluation of the importance of each criterion was conducted using the non-parametric Friedman criterion. 27 criteria which are most significant for assessing the competence of teachers in the mixed education of engineering students were identified. Taking into account the specificity of the teacher's work in mixed education, the singled out competence criteria were divided into three subgroups.

Effects of Students' Pre- and Post-Laboratory Concept Maps on Students' Attitudes toward Chemistry Laboratory in University General Chemistry

Science.gov (United States)

Kilic, Ziya; Kaya, Osman Nafiz; Dogan, Alev

2004-01-01

The purpose of this study was to investigate the effects of scientific discussions based on student-constructed pre- and post-laboratory concept maps on students' attitudes toward chemistry laboratory in the university general chemistry. As part of instruction, during the first four laboratory sessions, students were taught how to construct and…

Energizing Engineering Students with Hydrogen Fuel Cell Project

Science.gov (United States)

Cannell, Nori; Zavaleta, Dan

2010-01-01

At Desert Vista High School, near Phoenix, Arizona, Perkins Innovation Grant funding is being used to fund a program that is helping to prepare students for careers in engineering by giving them hands-on experience in areas like hydrogen generation and fuel cell utilization. As one enters Dan Zavaleta's automotive and engineering classroom and lab…

Perception of Leadership in Electrical Engineering Students, UTHM

Science.gov (United States)

Saari, Farrah Atikah Binti; Ghani, Nor Aslasiah Binti

2015-01-01

Demand for graduates with leadership skills more in priority to meet the needs of human resources. Hence, this study was undertaken to investigate the level of leadership skills among students in Electrical Engineering at University Tun Hussein Onn Malaysia. Descriptive study carried out to evaluate student leadership. The study sample consisted…

Undergraduate engineering students' attitudes and perceptions towards `professional ethics' course: a case study of India

Science.gov (United States)

Sethy, Satya Sundar

2017-11-01

'Professional Ethics' has been offered as a compulsory course to undergraduate engineering students in a premier engineering institution of India. It was noticed that students' perceptions and attitudes were frivolous and ornamental towards this course. Course instructors and institution authorities were motivated to find out the factors contributing to this awkwardness. For this purpose, a questionnaire was prepared and administrated to 336 students registered for the July-November 2014 semester. The study found two factors contributing to students' indifference towards the Professional Ethics course. First, most of the students did not have self-interest to join the engineering programme, and while pursuing their study, they decided to switch to a different field upon completion of their engineering study. Second, students who desired to be engineers in their future believed that engineering code of ethics is not really referred to in most of the engineering jobs, and therefore Professional Ethics course is only meant for classroom discussions.

Racial/Ethnic Differences in the Educational Expectations of Adolescents: Does Pursuing Higher Education Mean Something Different to Latino Students Compared to White and Black Students?

Science.gov (United States)

Turcios-Cotto, Viana Y.; Milan, Stephanie

2012-01-01

There are striking disparities in the academic achievement of American youth, with Latino students being a particularly vulnerable population. Adolescents’ academic expectations have been shown to predict educational outcomes, and thus are an important factor in understanding educational disparities. This article examines racial/ethnic differences in the future expectations of adolescents, with a particular focus on how expectations about higher education may differ in frequency and meaning for Latino youth. Participants included 375 urban ninth-grade students (49% Latino, 23% White, 22% Black, and 6% other; 51% female) who gave written descriptions of how they pictured their lives in five years. Responses were subsequently coded for content and themes. Results demonstrate that Latino youth were less likely to picture themselves attending college when compared to Black and White youth, and more likely to hold social goals, such as starting their own family. Ethnic/racial differences also were found in the themes present in responses, with Latino and Black students more likely than White students to describe individuation and materialistic goals, and to give more unrealistic responses. For Latino youth only, higher education goals were associated significantly with individuation themes. In addition, for Latino youth, adolescents who wished to pursue higher education reported more depressive symptoms and emotional distress than those who did not picture going to college, whereas the opposite pattern was evident for Black and White youth. These differences may reflect cultural values, such as familismo. Practice implications include the importance of culturally tailoring programs aimed at promoting higher education. PMID:23111844

Racial/Ethnic differences in the educational expectations of adolescents: does pursuing higher education mean something different to latino students compared to white and black students?

Science.gov (United States)

Turcios-Cotto, Viana Y; Milan, Stephanie

2013-09-01

There are striking disparities in the academic achievement of American youth, with Latino students being a particularly vulnerable population. Adolescents' academic expectations have been shown to predict educational outcomes, and thus are an important factor in understanding educational disparities. This article examines racial/ethnic differences in the future expectations of adolescents, with a particular focus on how expectations about higher education may differ in frequency and meaning for Latino youth. Participants included 375 urban ninth-grade students (49 % Latino, 23 % White, 22 % Black, and 6 % other; 51 % female) who gave written descriptions of how they pictured their lives in 5 years. Responses were subsequently coded for content and themes. Results demonstrate that Latino youth were less likely to picture themselves attending college when compared to Black and White youth, and more likely to hold social goals, such as starting their own family. Ethnic/racial differences also were found in the themes present in responses, with Latino and Black students more likely than White students to describe individuation and materialistic goals, and to give more unrealistic responses. For Latino youth only, higher education goals were associated significantly with individuation themes. In addition, for Latino youth, adolescents who wished to pursue higher education reported more depressive symptoms and emotional distress than those who did not picture going to college, whereas the opposite pattern was evident for Black and White youth. These differences may reflect cultural values, such as familismo. Practice implications include the importance of culturally tailoring programs aimed at promoting higher education.

Study Strategies for Engineering Students at DTU

DEFF Research Database (Denmark)

Christensen, Hans Peter

2002-01-01

The study strategies of first year Master students are investigated at DTU fall 1999 - spring 2002. The results show that the students study less than their teachers expect. And they spend most time on activities not leading to deep understanding and engineering competencies. The students spend...... almost half of their study time on theoretical calculations and only little on authentic problems. They attend many lectures but read very little. This may be a reasonable response to the teaching and examination they encounter; but not with respect to learning. Changing the teaching structure at DTU has...

`Human nature': Chemical engineering students' ideas about human relationships with the natural world

Science.gov (United States)

Goldman, Daphne; Ben-Zvi Assaraf, Orit; Shemesh, Julia

2014-05-01

While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The study was conducted with 247 3rd-4th year chemical engineering students in Israeli Universities. It employed the New Ecological Paradigm (NEP)-questionnaire to which students added written explanations. Quantitative analysis of NEP-scale results shows that the students demonstrated moderately ecocentric orientation. Explanations to the NEP-items reveal diverse, ambivalent ideas regarding the notions embodied in the NEP, strong scientific orientation and reliance on technology for addressing environmental challenges. Endorsing sustainability implies that today's engineers be equipped with an ecological perspective. The capacity of Higher Education to enable engineers to develop dispositions about human-nature interrelationships requires adaptation of curricula towards multidisciplinary, integrative learning addressing social-political-economic-ethical perspectives, and implementing critical-thinking within the socio-scientific issues pedagogical approach.

Improvement of Engineering Students' Communication Skills in English through Extensive Reading

Science.gov (United States)

Nishizawa, Hitoshi; Yoshioka, Takayoshi; Itoh, Kazuaki

The students' communication skills in English have improved after introducing Extensive Reading courses into the curriculum of Electrical and Electronic Engineering Department. The students' average TOEIC scores, which used to be far lower than the ones of students in other educational institutions, have increased in recent two years. The students who used to avoid learning English have welcomed extensive reading of graded readers for foreign learners and books for native children of English. This is because the extensive reading causes less stress and it is enjoyable. The students who have read more than 0.2 million words of English texts have faster reading speed and more confidence in reading. They seem to change their reading style from English-to-Japanese translation (and comprehension in Japanese) to direct comprehension in English. Their listening comprehension is also improved. Extensive reading is an effective educational method to improve English communication skills of engineering students, and it also becomes a useful method of continuous education for engineers in need of improving their skills.

Navigating the science, technology, engineering, and mathematics pipeline: How social capital impacts the educational attainment of college-bound female students

Science.gov (United States)

Lee, Rebecca Elizabeth

Despite the proliferation of women in higher education and the workforce, they have yet to achieve parity with men in many of the science, technology, engineering, and math (STEM) majors and careers. The gap is even greater in the representation of women from lower socioeconomic backgrounds. This study examined pre-college intervention strategies provided by the University of Southern California's Math, Engineering, Science Achievement (MESA) program, as well as the relationships and experiences that contributed to the success of underrepresented female high school students in the STEM pipeline. A social capital framework provided the backdrop to the study. This qualitative study takes an ethnographic approach, incorporating 11 interviews, 42 hours of observation, and document analysis to address the research questions: How does involvement in the MESA program impact female students' decisions to pursue a mathematics or science major in college? What is the role of significant others in supporting and encouraging student success? The findings revealed a continuous cycle of support for these students. The cycle started in the home environment, where parents were integral in the early influence on the students' decisions to pursue higher education. Relationships with teachers, counselors, and peers provided critical networks of support in helping these students to achieve their academic goals. Participation in the MESA program empowered the students and provided additional connections to knowledge-based resources. This study highlights the interplay among family, school, and the MESA program in the overall support of underrepresented female students in the STEM pipeline.

Women Students in Engineering in Mexico: Exploring Responses to Gender Differences

Science.gov (United States)

García Villa, Carmen; González y González, Elsa M.

2014-01-01

The percentage of women students in engineering in Mexico is still low compared to the percentage of women enrolled in higher education institutions in the country, which has achieved parity with male enrollment. It is thus important to understand how gender can shape the experiences of female college students in engineering programs, which was…

Preparing and Supporting Black Students to Enroll and Achieve in Advanced Mathematics Classes in Middle School: A Case Study

Science.gov (United States)

Cobbs, Joyce Bernice

2014-01-01

The literature on minority student achievement indicates that Black students are underrepresented in advanced mathematics courses. Advanced mathematics courses offer students the opportunity to engage with challenging curricula, experience rigorous instruction, and interact with quality teachers. The middle school years are particularly…

Engineering Students as Science Teachers: A Case Study on Students' Motivation

Directory of Open Access Journals (Sweden)

Aharon Gero

2014-06-01

Full Text Available The program "Educational Clinic" was recently developed and implemented at the Technion – Israel Institute of Technology. This one year program is designed to train engineering students as teaching assistants in high schools in order to help high school pupils with mathematics and science. The study described in this paper tracked changes in students' motivation to participate in the program throughout the year. Data was collected by questionnaires and interviews. The findings reveal that alongside a fixed high level of extrinsic motivational factors, which reflect student satisfaction of improving their teaching skills, a considerable increase was found in the level of intrinsic motivational factors, which express the students' interest in the program.

Examining the relationship of ethnicity, gender and social cognitive factors with the academic achievement of first-year engineering students

Science.gov (United States)

Carr, Bruce Henry

The purpose of the study was to examine the relationships of social cognitive factors and their influence on the academic performance of first-year engineering students. The nine social cognitive variables identified were under the groupings of personal support, occupational self-efficacy, academic self-efficacy, vocational interests, coping, encouragement, discouragement, outcome expectations, and perceived stress. The primary student participants in this study were first-year engineering students from underrepresented groups which include African American, Hispanic American students and women. With this in mind, the researcher sought to examine the interactive influence of race/ethnicity and gender based on the aforementioned social cognitive factors. Differences in academic performance (university GPA of first-year undergraduate engineering students) were analyzed by ethnicity and gender. There was a main effect for ethnicity only. Gender was found not to be significant. Hispanics were not found to be significantly different in their GPAs than Whites but Blacks were found to have lower GPAs than Whites. Also, Pearson correlation coefficients were used to examine the relationship between and among the nine identified social cognitive variables. The data from the analysis uncovered ten significant correlations which were as follows: occupational self-efficacy and academic self-efficacy, occupational self-efficacy and vocational interest, occupational self-efficacy and perceived stress, academic self-efficacy and encouragement, academic self-efficacy and outcome expectations, academic self-efficacy and perceived stress, vocational interest and outcome expectations, discouragement and encouragement, coping and perceived stress, outcome expectations and perceived stress. Next, a Pearson correlation coefficient was utilized to examine the relationship between academic performance (college GPA) of first-year undergraduate engineering students and the nine identified

Career development in Bioengineering/Biomedical Engineering: a student's roadmap.

Science.gov (United States)

Abu-Faraj, Ziad O

2008-01-01

Bioengineering/biomedical engineering education has progressed since the late 1950s and is still evolving in leading academic institutions worldwide. Today, Bioengineering/Biomedical Engineering is acclaimed as one of the most reputable fields within the global arena, and will likely be the catalyst for any future breakthroughs in Medicine and Biology. This paper provides a set of strategies and recommendations to be pursued by individuals aiming at planning and developing careers in this field. The paper targets the international student contemplating bioengineering/biomedical engineering as a career, with an underlying emphasis on the student within developing and transitional countries where career guidance is found deficient. The paper also provides a comprehensive definition of the field and an enumeration of its subdivisions.

Engineering surveying theory and examination problems for students

CERN Document Server

Schofield, W

2013-01-01

Engineering Surveying: Theory and Examination Problems for Students, Volume 1, Third Edition discusses topics concerning engineering surveying techniques and instrumentations. The book is comprised of eight chapters that cover several concerns in engineering survey. Chapter 1 discusses the basic concepts of surveying. Chapter 2 deals with simple and precise leveling, while Chapter 3 covers earthworks. The book also talks about the theodolite and its applications, and then discusses optical distance measurement. Curves, underground and hydrographic surveying, and aspects of dimensional control

Learning English: Experiences and Needs of Saudi Engineering Students

Science.gov (United States)

Unruh, Susan; Obeidat, Fayiz

2015-01-01

In this qualitative study, Saudi engineering students talk openly of their experiences learning English in the Kingdom of Saudi Arabia (KSA) and as university students in the United States (US). These students reported that they learned only the basics of vocabulary and grammar in KSA. Consequently, they came to the US with few English skills. In…

A Novel Approach to Physiology Education for Biomedical Engineering Students

Science.gov (United States)

DiCecco, J.; Wu, J.; Kuwasawa, K.; Sun, Y.

2007-01-01

It is challenging for biomedical engineering programs to incorporate an indepth study of the systemic interdependence of cells, tissues, and organs into the rigorous mathematical curriculum that is the cornerstone of engineering education. To be sure, many biomedical engineering programs require their students to enroll in anatomy and physiology…

Development of Analytical Thinking Ability and Attitudes towards Science Learning of Grade-11 Students through Science Technology Engineering and Mathematics (STEM Education) in the Study of Stoichiometry

Science.gov (United States)

Chonkaew, Patcharee; Sukhummek, Boonnak; Faikhamta, Chatree

2016-01-01

The purpose of this study was to investigate the analytical thinking abilities and attitudes towards science learning of grade-11 students through science, technology, engineering, and mathematics (STEM) education integrated with a problem-based learning in the study of stoichiometry. The research tools consisted of a pre- and post-analytical…

Preparing students for workplace learning in higher engineering education

NARCIS (Netherlands)

Dehing, A.J.M.

2012-01-01

Student preparation for professional practice is an important course aim in the education of engineers by the universities of applied sciences (Geurts & Meijers, 2004; Sheppard, et al., 2008; Sullivan & Rosin, 2008). Since the start of the professional engineering schools at the beginning of the

Senior Level Administrators and HBCUs: The Role of Support for Black Women’s Success in STEM

Directory of Open Access Journals (Sweden)

Amanda Washington Lockett

2018-04-01

Full Text Available While it is important for college and university senior administrators to embrace the traditional roles of their administrative positions, senior administrators’ interactions with students also shape institutional culture, students’ engagement, and ultimately play a role in students’ motivation to succeed. This engagement is especially evident in the Historically Black College and University (HBCU context as senior administrators’ engagement with students can directly or indirectly affect how students perceive themselves and their ability to succeed. This article aims to illuminate the role that HBCU senior level administrators play in students’ motivation toward success. We also highlight the notion that senior level administrators’ role in organizational culture ultimately led historically-disempowered Black women students toward success in even the most historically inaccessible pathways in the science, technology, engineering, and math (STEM fields. The study used semi-structured interviews with 71 Black women STEM students across 10 HBCUs and asked questions to better understand how events in their lives and on their campuses shaped their choice to pursue and persist through a STEM degree program. The study found that the women were highly motivated by their HBCUs’ family-like community of support. Integral to this article, this support was not confined to professors and peers, but extended to senior administrators. We conclude that Black women STEM students’ perception of their ability to succeed and their motivation is influenced by the institutions’ senior administration.

Innovation Pilot – to Improve Innovation Competences of Engineering Students

DEFF Research Database (Denmark)

Løje, Hanne; Grex, Sara

2017-01-01

In the future, there will be increasing demands for skilled and well-educated engineers who are capable of developing new solutions through innovation and can work in multidisciplinary teams. Therefore the universities are developing innovation and entrepreneurship programs to improve...... the innovation competences of the engineering students to meet this demand. In this paper, we will discuss how to improve innovation competences of engineering students and describe how it is done in a newly developed course at the Technical University of Denmark (DTU). The aim of the course is to strengthened...... innovation skills in addition to personal and interpersonal skills. This is done in close collaboration with companies. The outline for the course is that the students work in multidisciplinary teams with specific challenges offered by the companies. The main findings so far show the importance of the use...