WorldWideScience

Sample records for black box software

  1. Black-Box Fuzzing of the REDHAWK Software Communications Architecture

    OpenAIRE

    Sayed, Shereef

    2015-01-01

    As the complexity of software increases, so does the complexity of software testing. This challenge is especially true for modern military communications as radio functionality becomes more digital than analog. The Software Communications Architecture was introduced to manage the increased complexity of software radios. But the challenge of testing software radios still remains. A common methodology of software testing is the unit test. However, unit testing of software assumes that the ...

  2. The BOXES Methodology Black Box Dynamic Control

    CERN Document Server

    Russell, David W

    2012-01-01

    Robust control mechanisms customarily require knowledge of the system’s describing equations which may be of the high order differential type.  In order to produce these equations, mathematical models can often be derived and correlated with measured dynamic behavior.  There are two flaws in this approach one is the level of inexactness introduced by linearizations and the other when no model is apparent.  Several years ago a new genre of control systems came to light that are much less dependent on differential models such as fuzzy logic and genetic algorithms. Both of these soft computing solutions require quite considerable a priori system knowledge to create a control scheme and sometimes complicated training program before they can be implemented in a real world dynamic system. Michie and Chambers’ BOXES methodology created a black box system that was designed to control a mechanically unstable system with very little a priori system knowledge, linearization or approximation.  All the method need...

  3. Repackaging SRS Black Box TRU Waste

    International Nuclear Information System (INIS)

    Swale, D. J.; Stone, K.A.; Milner, T. N.

    2006-01-01

    Historically, large items of TRU Waste, which were too large to be packaged in drums for disposal have been packaged in various sizes of custom made plywood boxes at the Savannah River Site (SRS), for many years. These boxes were subsequently packaged into large steel ''Black Boxes'' for storage at SRS, pending availability of Characterization and Certification capability, to facilitate disposal of larger items of TRU Waste. There are approximately 107 Black Boxes in inventory at SRS, each measuring some 18' x 12' x 7', and weighing up to 45,000 lbs. These Black Boxes have been stored since the early 1980s. The project to repackage this waste into Standard Large Boxes (SLBs), Standard Waste Boxes (SWB) and Ten Drum Overpacks (TDOP), for subsequent characterization and WIPP disposal, commenced in FY04. To date, 10 Black Boxes have been repackaged, resulting in 40 SLB-2's, and 37 B25 overpack boxes, these B25's will be overpacked in SLB-2's prior to shipping to WIPP. This paper will describe experience to date from this project

  4. Black-Box Search by Unbiased Variation

    DEFF Research Database (Denmark)

    Lehre, Per Kristian; Witt, Carsten

    2012-01-01

    The complexity theory for black-box algorithms, introduced by Droste, Jansen, and Wegener (Theory Comput. Syst. 39:525–544, 2006), describes common limits on the efficiency of a broad class of randomised search heuristics. There is an obvious trade-off between the generality of the black-box model...... and the strength of the bounds that can be proven in such a model. In particular, the original black-box model provides for well-known benchmark problems relatively small lower bounds, which seem unrealistic in certain cases and are typically not met by popular search heuristics.In this paper, we introduce a more...... restricted black-box model for optimisation of pseudo-Boolean functions which we claim captures the working principles of many randomised search heuristics including simulated annealing, evolutionary algorithms, randomised local search, and others. The key concept worked out is an unbiased variation operator...

  5. Fatal exit the automotive black box debate

    CERN Document Server

    Kowalick, Tom

    2005-01-01

    "Fatal Exit: The Automotive Black Box Debate cuts through thirty years of political wrangling and institutional biases to provide an argument for the Motor Vehicle Event Data Recorder (MVEDR). This automotive equivalent of an airplane's flight recorder or black box is intended to solve the mysteries of car crashes and improve the safety of our roads. The reader is taken inside the automotive industry and the government highway safety establishment to foster an understanding of the politics and the positions on all sides of this safety debate. The author takes an unbiased approach, chronologically presenting each argument and uncovering the agendas and mandates of each of the stakeholders." "This publication is essential reading for all consumers who need to have their voices heard on this critical issue, as well as for attorneys, public safety advocates, public policy administrators, engineers, automotive professionals, journalists, and insurance executives."--Jacket.

  6. Hairy black holes in a box

    Energy Technology Data Exchange (ETDEWEB)

    Basu, Pallab [International Center for Theoretical Sciences,IISc Campus, Bangalore 560012 (India); Krishnan, Chethan; Subramanian, P.N. Bala [Center for High Energy Physics, Indian Institute of Science,Bangalore 560012 (India)

    2016-11-08

    We do a systematic study of the phases of gravity coupled to an electromagnetic field and charged scalar in flat space, with box boundary conditions. The scalar-less box has previously been investigated by Braden, Brown, Whiting and York (and others) before AdS/CFT and we elaborate and extend their results in a language more familiar from holography. The phase diagram of the system is analogous to that of AdS black holes, but we emphasize the differences and explain their origin. Once the scalar is added, we show that the system admits both boson stars as well as hairy black holes as solutions, providing yet another way to evade flat space no-hair theorems. Furthermore both these solutions can exist as stable phases in regions of the phase diagram. The final picture of the phases that emerges is strikingly similar to that found recently for holographic superconductors in global AdS, http://arxiv.org/abs/1602.07211. Our construction lays bare certain previously unnoticed subtleties associated to the definition quasi-local charges for gravitating scalar fields in finite regions.

  7. Comparative Human and Automatic Evaluation of Glass-Box and Black-Box Approaches to Interactive Translation Prediction

    Directory of Open Access Journals (Sweden)

    Torregrosa Daniel

    2017-06-01

    Full Text Available Interactive translation prediction (ITP is a modality of computer-aided translation that assists professional translators by offering context-based computer-generated continuation suggestions as they type. While most state-of-the-art ITP systems follow a glass-box approach, meaning that they are tightly coupled to an adapted machine translation system, a black-box approach which does not need access to the inner workings of the bilingual resources used to generate the suggestions has been recently proposed in the literature: this new approach allows new sources of bilingual information to be included almost seamlessly. In this paper, we compare for the first time the glass-box and the black-box approaches by means of an automatic evaluation of translation tasks between related languages such as English–Spanish and unrelated ones such as Arabic–English and English–Chinese, showing that, with our setup, 20%–50% of keystrokes could be saved using either method and that the black-box approach outperformed the glass-box one in five out of six scenarios operating under similar conditions. We also performed a preliminary human evaluation of English to Spanish translation for both approaches. On average, the evaluators saved 10% keystrokes and were 4% faster with the black-box approach, and saved 15% keystrokes and were 12% slower with the glass-box one; but they could have saved 51% and 69% keystrokes respectively if they had used all the compatible suggestions. Users felt the suggestions helped them to translate faster and easier. All the tools used to perform the evaluation are available as free/open–source software.

  8. Optimal Black-Box Secret Sharing over Arbitrary Abelian Groups

    DEFF Research Database (Denmark)

    Cramer, Ronald; Fehr, Serge

    2002-01-01

    are defined over ℤ and are designed independently of the group G from which the secret and the shares are sampled. This means that perfect completeness and perfect privacy are guaranteed regardless of which group G is chosen. We define the black-box secret sharing problem as the problem of devising....... A recent example is secure general multi-party computation over black-box rings. In 1994 Desmedt and Frankel have proposed an elegant approach to the black-box secret sharing problem based in part on polynomial interpolation over cyclotomic number fields. For arbitrary given T t,n with 0

  9. Faster Black-Box Algorithms Through Higher Arity Operators

    DEFF Research Database (Denmark)

    Doerr, Benjamin; Johannsen, Daniel; Kötzing, Timo

    2011-01-01

    We extend the work of Lehre and Witt (GECCO 2010) on the unbiased black-box model by considering higher arity variation operators. In particular, we show that already for binary operators the black-box complexity of LeadingOnes drops from (n2) for unary operators to O(n log n). For OneMax, the (n...... log n) unary black-box complexity drops to O(n) in the binary case. For k-ary operators, k n, the OneMax-complexity further decreases to O(n= log k)....

  10. Software sensors based on the grey-box modelling approach

    DEFF Research Database (Denmark)

    Carstensen, J.; Harremoës, P.; Strube, Rune

    1996-01-01

    In recent years the grey-box modelling approach has been applied to wastewater transportation and treatment Grey-box models are characterized by the combination of deterministic and stochastic terms to form a model where all the parameters are statistically identifiable from the on......-line measurements. With respect to the development of software sensors, the grey-box models possess two important features. Firstly, the on-line measurements can be filtered according to the grey-box model in order to remove noise deriving from the measuring equipment and controlling devices. Secondly, the grey......-box models may contain terms which can be estimated on-line by use of the models and measurements. In this paper, it is demonstrated that many storage basins in sewer systems can be used as an on-line flow measurement provided that the basin is monitored on-line with a level transmitter and that a grey...

  11. Efficient approximation of black-box functions and Pareto sets

    NARCIS (Netherlands)

    Rennen, G.

    2009-01-01

    In the case of time-consuming simulation models or other so-called black-box functions, we determine a metamodel which approximates the relation between the input- and output-variables of the simulation model. To solve multi-objective optimization problems, we approximate the Pareto set, i.e. the

  12. Reconciling White-Box and Black-Box Perspectives on Behavioral Self-adaptation

    DEFF Research Database (Denmark)

    Bruni, Roberto; Corradini, Andrea; Gadducci, Fabio

    2015-01-01

    This paper proposes to reconcile two perspectives on behavioral adaptation commonly taken at different stages of the engineering of autonomic computing systems. Requirements engineering activities often take a black-box perspective: A system is considered to be adaptive with respect to an environ...

  13. Black Box Traceable Ciphertext Policy Attribute-Based Encryption Scheme

    Directory of Open Access Journals (Sweden)

    Xingbing Fu

    2015-08-01

    Full Text Available In the existing attribute-based encryption (ABE scheme, the authority (i.e., private key generator (PKG is able to calculate and issue any user’s private key, which makes it completely trusted, which severely influences the applications of the ABE scheme. To mitigate this problem, we propose the black box traceable ciphertext policy attribute-based encryption (T-CP-ABE scheme in which if the PKG re-distributes the users’ private keys for malicious uses, it might be caught and sued. We provide a construction to realize the T-CP-ABE scheme in a black box model. Our scheme is based on the decisional bilinear Diffie-Hellman (DBDH assumption in the standard model. In our scheme, we employ a pair (ID, S to identify a user, where ID denotes the identity of a user and S denotes the attribute set associated with her.

  14. THE USE OF EVENT DATA RECORDER (EDR – BLACK BOX

    Directory of Open Access Journals (Sweden)

    Gabriel Nowacki

    2014-03-01

    Full Text Available The paper refers to the registration of road events by a modern device called EDR – black box for all types of the motor vehicles. The device records data concerning vehicle’s technical condition, the way it was driven and RTS. The recorder may be used in private and commercial cars, taxies, buses and trucks. The recorder may serve the purpose of a neutral witness for the police, courts and insurance firms, for which it will facilitate making the reconstruction of the road accidents events and will provide a proof for those who caused them. The device will bring efficient driving, which will significantly contribute to decreasing the number of road accidents and limiting the environmental pollution. In the end in the last year German parliament backed a proposal to the European Commission to put black boxes, which gather information from vehicles involved in accidents, in all the new cars from 2015 on.

  15. Introducing Elitist Black-Box Models: When Does Elitist Selection Weaken the Performance of Evolutionary Algorithms?

    OpenAIRE

    Doerr, Carola; Lengler, Johannes

    2015-01-01

    Black-box complexity theory provides lower bounds for the runtime of black-box optimizers like evolutionary algorithms and serves as an inspiration for the design of new genetic algorithms. Several black-box models covering different classes of algorithms exist, each highlighting a different aspect of the algorithms under considerations. In this work we add to the existing black-box notions a new \\emph{elitist black-box model}, in which algorithms are required to base all decisions solely on ...

  16. SSL/TLS Vulnerability Detection Using Black Box Approach

    Science.gov (United States)

    Gunawan, D.; Sitorus, E. H.; Rahmat, R. F.; Hizriadi, A.

    2018-03-01

    Socket Secure Layer (SSL) and Transport Layer Security (TLS) are cryptographic protocols that provide data encryption to secure the communication over a network. However, in some cases, there are vulnerability found in the implementation of SSL/TLS because of weak cipher key, certificate validation error or session handling error. One of the most vulnerable SSL/TLS bugs is heartbleed. As the security is essential in data communication, this research aims to build a scanner that detect the SSL/TLS vulnerability by using black box approach. This research will focus on heartbleed case. In addition, this research also gathers information about existing SSL in the server. The black box approach is used to test the output of a system without knowing the process inside the system itself. For testing purpose, this research scanned websites and found that some of the websites still have SSL/TLS vulnerability. Thus, the black box approach can be used to detect the vulnerability without considering the source code and the process inside the application.

  17. Vehicle Plate Detection in Car Black Box Video

    Directory of Open Access Journals (Sweden)

    Dongjin Park

    2017-01-01

    Full Text Available Internet services that share vehicle black box videos need a way to obfuscate license plates in uploaded videos because of privacy issues. Thus, plate detection is one of the critical functions that such services rely on. Even though various types of detection methods are available, they are not suitable for black box videos because no assumption about size, number of plates, and lighting conditions can be made. We propose a method to detect Korean vehicle plates from black box videos. It works in two stages: the first stage aims to locate a set of candidate plate regions and the second stage identifies only actual plates from candidates by using a support vector machine classifier. The first stage consists of five sequential substeps. At first, it produces candidate regions by combining single character areas and then eliminates candidate regions that fail to meet plate conditions through the remaining substeps. For the second stage, we propose a feature vector that captures the characteristics of plates in texture and color. For performance evaluation, we compiled our dataset which contains 2,627 positive and negative images. The evaluation results show that the proposed method improves accuracy and sensitivity by at least 5% and is 30 times faster compared with an existing method.

  18. Software Estimation Demystifying the Black Art

    CERN Document Server

    McConnell, Steve

    2009-01-01

    Often referred to as the "black art" because of its complexity and uncertainty, software estimation is not as difficult or puzzling as people think. In fact, generating accurate estimates is straightforward-once you understand the art of creating them. In his highly anticipated book, acclaimed author Steve McConnell unravels the mystery to successful software estimation-distilling academic information and real-world experience into a practical guide for working software professionals. Instead of arcane treatises and rigid modeling techniques, this guide highlights a proven set of procedures,

  19. Features for Exploiting Black-Box Optimization Problem Structure

    DEFF Research Database (Denmark)

    Tierney, Kevin; Malitsky, Yuri; Abell, Tinus

    2013-01-01

    Black-box optimization (BBO) problems arise in numerous scientic and engineering applications and are characterized by compu- tationally intensive objective functions, which severely limit the number of evaluations that can be performed. We present a robust set of features that analyze the tness...... landscape of BBO problems and show how an algorithm portfolio approach can exploit these general, problem indepen- dent features and outperform the utilization of any single minimization search strategy. We test our methodology on data from the GECCO Workshop on BBO Benchmarking 2012, which contains 21...

  20. VBSM: VCC-Based Black Box Service Model with Enhanced Data Integrity

    Directory of Open Access Journals (Sweden)

    Won Min Kang

    2014-10-01

    Full Text Available Recently, intelligent transport systems have been applied to vehicle cloud environments. Such technology is especially useful for the systematic management of road traffic. Moreover, automobiles are increasingly equipped with a black box for accident prevention and preservation of evidence. Vehicle black boxes have become mandatory because black box images and voice data have served as forensic evidence in courts. However, the data from black boxes can be forged or modified by man-in-the-middle (MITM attacks and message hijacking. In this paper, we propose a vehicle cloud computing-based black box service model that can provide integrity for black box data through digital signatures in vehicle cloud computing (VCC environments. Our proposed model protects against MITM attacks and message hijacking using only a hash value and digital signature. Moreover, a mirroring technique (RAID 1 provides backup and recovery to protect the data from a traffic accident.

  1. Pothole Detection System Using a Black-box Camera

    Directory of Open Access Journals (Sweden)

    Youngtae Jo

    2015-11-01

    Full Text Available Aging roads and poor road-maintenance systems result a large number of potholes, whose numbers increase over time. Potholes jeopardize road safety and transportation efficiency. Moreover, they are often a contributing factor to car accidents. To address the problems associated with potholes, the locations and size of potholes must be determined quickly. Sophisticated road-maintenance strategies can be developed using a pothole database, which requires a specific pothole-detection system that can collect pothole information at low cost and over a wide area. However, pothole repair has long relied on manual detection efforts. Recent automatic detection systems, such as those based on vibrations or laser scanning, are insufficient to detect potholes correctly and inexpensively owing to the unstable detection of vibration-based methods and high costs of laser scanning-based methods. Thus, in this paper, we introduce a new pothole-detection system using a commercial black-box camera. The proposed system detects potholes over a wide area and at low cost. We have developed a novel pothole-detection algorithm specifically designed to work with the embedded computing environments of black-box cameras. Experimental results are presented with our proposed system, showing that potholes can be detected accurately in real-time.

  2. Black-box solvers for partial differential equations

    International Nuclear Information System (INIS)

    Weiss, R.; Schoenauer, W.

    1993-01-01

    The design principles of the black-box solvers FIDISOL/CADSOL and VECFEM are presented for the solution of system of elliptic and parabolic partial differential equations by the finite difference and the finite element method. Special focus is directed to a high flexibility of the programs in order to solve a large range of problems. The solvers use state-of-the-art algorithms and are adapted to advanced computer architectures in order to achieve a high performance. As quality control an error estimate is implemented. The resulting numerical problems focus in the iterative linear solvers. It is a real challenge to select robust and efficient iterative solvers for an extremely wide class of problems. The strong relation between application problem and mathematical problems is pointed out. (orig.)

  3. Motivating crowding theory - opening the black box of intrinsic motivation

    DEFF Research Database (Denmark)

    Jacobsen, Christian Bøtcher

    2010-01-01

    Public employees work for many other reasons than because they are paid for it. In other words, intrinsic motivation is an important determinant for their performance. Nonetheless, public sector organizations increasingly rely on extrinsic motivation factors such as monetary incentives to motivate...... employees. Motivation crowding theory claims that this may be at the expense of intrinsic motivation, if the extrinsic motivation factor is perceived to be controlling. On the other hand, intrinsic motivation will be enhanced (crowded in), if the extrinsic motivation factor is perceived to be supportive....... Studies have found support for the motivation crowding claim, but have neglected intrinsic motivation. This study opens the black box of intrinsic motivation and finds a meaningful distinction between task motivation and public service motivation. Among 2,772 physiotherapists in the Danish public sector...

  4. Opening the black box of quality improvement collaboratives: An Actor-Network theory approach

    NARCIS (Netherlands)

    T. Broer (Tineke); A.P. Nieboer (Anna); R.A. Bal (Roland)

    2010-01-01

    textabstractBackground. Quality improvement collaboratives are often labeled as black boxes because effect studies usually do not describe exactly how the results were obtained. In this article we propose a way of opening such a black box, by taking up a dynamic perspective based on Actor-Network

  5. Prescriber compliance with black box warnings in older adult patients.

    Science.gov (United States)

    Ricci, Judith R; Coulen, Charmaine; Berger, Jan E; Moore, Marsha C; McQueen, Angela; Jan, Saira A

    2009-11-01

    Patients prescribed medications with US Food and Drug Administration-issued black box warnings (BBWs) warrant additional vigilance by prescribers because these drugs can cause serious adverse drug events. Seniors are at greater risk for adverse drug events due to increased medication burden and greater health vulnerability. To improve our understanding of the prescribing and patient-monitoring practices of physicians prescribing medications with a BBW to patients age >or=65 years in an ambulatory care setting. A retrospective cohort study of administrative pharmacy and medical claims identified 58,190 patients age >or=65 years in the Horizon Blue Cross Blue Shield of New Jersey beneficiary population with >or=1 claim for >or=1 of the 8 targeted medications between January 1, 2005, and December 31, 2005. Medications included carbamazepine, amiodarone, ketoconazole, loop diuretics, methotrexate, cyclosporine, metformin and combinations, and cilostazol. Patients were followed 12 months from the index prescription date to evaluate prescriber compliance with BBWs using operationalized definitions of compliance. Patients prescribed drugs with a drug-laboratory warning had lower rates of prescriber BBW compliance (0.7%-24.9%) than patients prescribed drugs with a drug-disease warning (84.7%-90.2%). Administrative claims analysis identified low rates of prescriber compliance with BBWs in managing patients age >or=65 years. Claims analysis may be a cost-effective strategy to monitor prescriber compliance with BBWs in older patients at higher risk.

  6. Different black box warning labeling for same-class drugs.

    Science.gov (United States)

    Panagiotou, Orestis A; Contopoulos-Ioannidis, Despina G; Papanikolaou, Panagiotis N; Ntzani, Evangelia E; Ioannidis, John P A

    2011-06-01

    Black box warnings (BBWs) are the strongest medication-related safety warnings in a drug's labeling information and highlight major risks. Absence of a BBW or asynchronous addition of a BBW among same-class drugs could have major implications. We identified the 20 top-selling drugs in 2008 (10 with BBWs and 10 without BBWs on their label) that belonged to different drug classes. We collected labeling information on all drugs belonging in these 20 classes, and recorded differences in the presence and timing of acquisition of BBWs for same-class drugs. Across the 20 evaluated drug classes, we identified 176 different agents, of which 7 had been withdrawn for safety reasons. The reasons for the withdrawals became BBWs in other same-class agents only in two of the seven cases. Differences were identified in 9 of the 20 classes corresponding to 15 BBWs that were not present in all drugs of the same class. The information for 10 of the 15 different BBWs were included in the labels of same-class drugs as simple warnings or text, while it was absent entirely in 5 BBWs. The median interval from the time the BBW had appeared in another drug of the same class was 66 months. Differences in BBW labeling in same-class drugs are common and shape impressions about the safety of similar agents. BBW labeling needs to become more systematic.

  7. Video otoscopy: bringing otoscopy out of the "black box".

    Science.gov (United States)

    Jones, Woodson Scott

    2006-11-01

    Several billion dollars are spent each year on otitis media, a diagnosis for which educational approaches and diagnostic skills are suboptimal. The Center for Disease Control has identified improvement in otoscopy skills as a key intervention to curb inappropriate antibiotic usage. Educators are looking for interventions to both improve and assess otoscopy skills. Video otoscopy (VO) uses endoscopic technology to project the image of the ear onto a monitor for all to see, offering unexplored educational opportunity. The objective of this study is to perform an evaluation of VO systems in medical education from a review of the literature and hands-on experience of available technology. The evaluation will focus on the technical acceptability (user requirements), clinical appropriateness (validity, reliability, feasibility), operational effectiveness (training requirements and implementation), and equipment selection. The technical requirements in pediatric education exceed those available in some VO systems, specifically pneumatic capability, sophisticated cameras and optics, and pediatric-sized ear speculums. VO images are comparable to the conventional otoscopic and otomicroscopic examinations. VO is feasible in a primary care setting and can be integrated into resident and medical student education. The technology in VO systems is changing rapidly, necessitating comparison of systems before equipment is purchased. VO is technically acceptable, clinically appropriate and can be integrated into the otoscopic education of residents and medical students. VO provides an opportunity to bring the pediatric ear examination out of the "black box," potentially improving diagnostic skills, quality of care, and reducing antibiotic overuse.

  8. The Advanced Laboratory: beyond the ``black box'' to real physics

    Science.gov (United States)

    Zimmerman, George; Sulak, Lawrence

    2008-04-01

    The balance between theory and experiment in present physics curricula is too heavily weighted towards theory. Our physics majors do not realize that ``truth in physics'' depends either on experimental verification of theoretical predictions or on serendipitous discovery. Nor do they appreciate that most theories originate to explain experimental facts. They regard instruments as ``black boxes'' (although usually they are painted a different color). The Advanced Laboratory is essentially the only place in the curriculum where students confront the link between theory and experiment. In this age of disposing of (rather than repairing) equipment, Advanced Lab gives students insight into the inner workings of instruments and essential hands-on skills exploiting them: soldering wires, transferring cryo liquids, achieving high vacuum, acquiring reliable data, evaluating errors, fitting data, and drafting a PRL. Students learn techniques critical to several branches of physics, leading to different experimental approaches in their eventual work. If a student pursues theory, AdLab teaches her how to evaluate experiments, experimentalists, and their data. The basic skills learned, and the resulting understanding of physics, will be illustrated with the experiment on the Quantum Hall Effect from our AdLab.

  9. Colouring in the "black-box": Alternative renderings of scientific visualisations in two comic book cosmologies.

    Science.gov (United States)

    Locke, Simon

    2013-04-01

    Two somewhat contrasting views of public uses of scientific visualisations argue that they are "black-boxed" with meaning given by the scientific community or they are "polysemic" with meaning given by the context of presentation. This paper argues that whether they are treated as black-boxed or not and in what manner this is done is itself part of the meaning given by context. Thus, "black-boxing" is done not only by scientists but also by members of the public. The argument is illustrated by reference to two recent comic books, Dave Sim's Cerebus and Alan Moore's Promethea, in which the authors present cosmological visions of the universe using scientific visualisations to create a sense of realism. From analysis of their use of images of planet Earth and the human foetus it is argued that, although the images are black-boxed, the authors re-work them aesthetically to suit their specific moral and cosmological views.

  10. Beyond Black Boxes: bringing transparency and aesthetics back to scientific investigation

    Directory of Open Access Journals (Sweden)

    Robbie Berg

    2002-01-01

    Full Text Available This article describes two years of work done under the project "Beyond Black Boxes" (BBB, which focuses on developing new computational tools and design materials that enable students to create, modify and customize their scientific instruments.

  11. Implementing Black Box Warnings (BBWs) in Health Information Systems

    Science.gov (United States)

    Ikezuagu, M.; Yang, E.; Daghstani, A.; Kaelber, D. C.

    2012-01-01

    Objective To develop a practical approach for implementing clinical decision support (CDS) for medication black box warnings (BBWs) into health information systems (HIS). Methods We reviewed all existing medication BBWs and organized them into a taxonomy that identifies opportunities and challenges for implementing CDS for BBWs into HIS. Results Of the over 400 BBWs that currently exist, they can be organized into 4 categories with 9 sub-categories based on the types of information contained in the BBWs, who should be notified, and potential actions to that could be taken by the person receiving the BBW. Informatics oriented categories and sub-categories of BBWs include – interactions (13%) (drug-drug (4%) and drug-diagnosis (9%)), testing (21%) (baseline (9%) and on-going (12%)), notifications (29%) (drug prescribers (7%), drug dispensers (2%), drug administrators (9%), patients (10%), and third parties (1%)), and non-actionable (37%). This categorization helps identify BBWs for which CDS can be easily implemented into HIS today (such as drug-drug interaction BBWs), those that cannot be easily implemented into HIS today (such as non-actionable BBWs), and those where advanced and/or integrated HIS need to be in place to implement CDS for BBWs (such a drug dispensers BBWs). Conclusions HIS have the potential to improve patient safety by implementing CDS for BBWs. A key to building CDS for BBWs into HIS is developing a taxonomy to serve as an organizing roadmap for implementation. The informatics oriented BBWs taxonomy presented here identified types of BBWs in which CDS can be implemented easily into HIS currently (a minority of the BBWs) and those types of BBWs where CDS cannot be easily implemented today (a majority of BBWs). PMID:23616904

  12. Bayesian molecular dating: opening up the black box.

    Science.gov (United States)

    Bromham, Lindell; Duchêne, Sebastián; Hua, Xia; Ritchie, Andrew M; Duchêne, David A; Ho, Simon Y W

    2018-05-01

    Molecular dating analyses allow evolutionary timescales to be estimated from genetic data, offering an unprecedented capacity for investigating the evolutionary past of all species. These methods require us to make assumptions about the relationship between genetic change and evolutionary time, often referred to as a 'molecular clock'. Although initially regarded with scepticism, molecular dating has now been adopted in many areas of biology. This broad uptake has been due partly to the development of Bayesian methods that allow complex aspects of molecular evolution, such as variation in rates of change across lineages, to be taken into account. But in order to do this, Bayesian dating methods rely on a range of assumptions about the evolutionary process, which vary in their degree of biological realism and empirical support. These assumptions can have substantial impacts on the estimates produced by molecular dating analyses. The aim of this review is to open the 'black box' of Bayesian molecular dating and have a look at the machinery inside. We explain the components of these dating methods, the important decisions that researchers must make in their analyses, and the factors that need to be considered when interpreting results. We illustrate the effects that the choices of different models and priors can have on the outcome of the analysis, and suggest ways to explore these impacts. We describe some major research directions that may improve the reliability of Bayesian dating. The goal of our review is to help researchers to make informed choices when using Bayesian phylogenetic methods to estimate evolutionary rates and timescales. © 2017 Cambridge Philosophical Society.

  13. Nine optical black-box experiments for lower-secondary students

    Science.gov (United States)

    Rode, Henning; Friege, Gunnar

    2017-05-01

    In this paper a sequence of nine, easy to manufacture optical black-box experiments with increasing levels of difficulty, and supportive frameworks for physics classes are introduced. They have been evaluated in a lower-secondary school at the end of optics lessons. A black-box is a kind of experimental task where the inner structure is not visible to the experimenter. Using mirrors, beam-splitters, and blockers in a black-box to manipulate the light beam’s direction through this specific experiment, students are instructed to vary input and observe the output of light to get an idea of the possible inner structure. The presented sequence of black-box experiments requires a basic knowledge of the linear propagation of light and is suitable for beginner physics. Furthermore a framework for concrete implementation to physics classes is given, which covers suitable structure of class, examples for helpful worksheets, and authentic students’ solutions. The difficulty of the specific black-box experiments is given by the students’ success within observing input-output correlation and conclusion of an inner structure. The experiments’ implementation to physics classes may cover elaboration, practice, and aspects of the nature of science even in a beginner’s class. Evaluation has been conducted with students of young age (11-12 years old), however they are suitable for older students also. Although dealing with a time extensive sequence of experiments, students showed a high level of motivation throughout. Overall, implementing this sequence of black-box experiments is seen as valuable and helpful for physics classes.

  14. myBlackBox: Blackbox Mobile Cloud Systems for Personalized Unusual Event Detection

    Directory of Open Access Journals (Sweden)

    Junho Ahn

    2016-05-01

    Full Text Available We demonstrate the feasibility of constructing a novel and practical real-world mobile cloud system, called myBlackBox, that efficiently fuses multimodal smartphone sensor data to identify and log unusual personal events in mobile users’ daily lives. The system incorporates a hybrid architectural design that combines unsupervised classification of audio, accelerometer and location data with supervised joint fusion classification to achieve high accuracy, customization, convenience and scalability. We show the feasibility of myBlackBox by implementing and evaluating this end-to-end system that combines Android smartphones with cloud servers, deployed for 15 users over a one-month period.

  15. Unprivileged Black-Box Detection of User-space Keyloggers

    NARCIS (Netherlands)

    Ortolani, S.; Giuffrida, C.; Crispo, B.

    2012-01-01

    Software keyloggers are a fast growing class of invasive software often used to harvest confidential information. One of the main reasons for this rapid growth is the possibility for unprivileged programs running in user space to eavesdrop and record all the keystrokes typed by the users of a

  16. Opening the Black Box: Strategies for Increased User Involvement in Existing Algorithm Implementations.

    Science.gov (United States)

    Mühlbacher, Thomas; Piringer, Harald; Gratzl, Samuel; Sedlmair, Michael; Streit, Marc

    2014-12-01

    An increasing number of interactive visualization tools stress the integration with computational software like MATLAB and R to access a variety of proven algorithms. In many cases, however, the algorithms are used as black boxes that run to completion in isolation which contradicts the needs of interactive data exploration. This paper structures, formalizes, and discusses possibilities to enable user involvement in ongoing computations. Based on a structured characterization of needs regarding intermediate feedback and control, the main contribution is a formalization and comparison of strategies for achieving user involvement for algorithms with different characteristics. In the context of integration, we describe considerations for implementing these strategies either as part of the visualization tool or as part of the algorithm, and we identify requirements and guidelines for the design of algorithmic APIs. To assess the practical applicability, we provide a survey of frequently used algorithm implementations within R regarding the fulfillment of these guidelines. While echoing previous calls for analysis modules which support data exploration more directly, we conclude that a range of pragmatic options for enabling user involvement in ongoing computations exists on both the visualization and algorithm side and should be used.

  17. 76 FR 16350 - Medical Devices; Ovarian Adnexal Mass Assessment Score Test System; Labeling; Black Box Restrictions

    Science.gov (United States)

    2011-03-23

    ... a risk identified in the special controls guidance document must be in a black box and must appear... (special controls). DATES: Submit either electronic or written comments by May 23, 2011. ADDRESSES: You may... gynecologic oncologist for surgery. B. Identified Risk to Health The ovarian adnexal mass assessment score...

  18. 76 FR 82129 - Medical Devices; Ovarian Adnexal Mass Assessment Score Test System; Labeling; Black Box Restrictions

    Science.gov (United States)

    2011-12-30

    ... identified in the special controls guidance document must be in a black box and must appear in all labeling... clinical and radiological evaluation, to augment the identification of patients whose gynecologic surgery... special control the guidance entitled ``Class II Special Controls Guidance Document: Ovarian Adnexal Mass...

  19. Black-Box Optimization for Buildings and Its Enhancement by Advanced Communication Infrastructure

    Czech Academy of Sciences Publication Activity Database

    Macek, Karel; Rojíček, J.; Kontes, G.; Rovas, D. V.

    2013-01-01

    Roč. 1, č. 5 (2013), s. 53-64 ISSN 2255-2863 R&D Projects: GA ČR GA13-13502S Institutional support: RVO:67985556 Keywords : Evolutionary algorithms * Black box modeling * Simplification * Refining * HVAC * Load shedding * Communication infrastructure Subject RIV: BC - Control Systems Theory http://library.utia.cas.cz/separaty/2014/AS/macek-0423196.pdf

  20. The Solow residual as a black box: attemps at integrating business cycle and growth theories

    NARCIS (Netherlands)

    Mata, T.; Louçã, F.

    2009-01-01

    Robert Solow's "Technical Change and the Aggregate Production Function" (1957) has had an enduring influence on macroeconomics. In this article, we examine the history of fluctuations in growth theory through the story of the "Solow residual" as a "black box." We show that after Solow's seminal

  1. Inside the Black Box: Tracking Decision-Making in an Action Research Study

    Science.gov (United States)

    Smith, Cathryn

    2017-01-01

    Action research has been described as "designing the plane while flying it" (Herr & Anderson, 2005, p. 69). A black box documented the researcher's decisions while facilitating leadership development sessions with teacher leaders. Ten process folio steps informed the study through six iterations. Planning steps included a design…

  2. Black Box Thinking: Analysis of a Service Outsourcing Case in Insurance

    Science.gov (United States)

    Witman, Paul D.; Njunge, Christopher

    2016-01-01

    Often, users of information systems (both automated and manual) must analyze those systems in a "black box" fashion, without being able to see the internals of how the system is supposed to work. In this case of business process outsourcing, an insurance industry customer encounters an ongoing stream of customer service issues, with both…

  3. A diary study to open up the black box of overtime work among university faculty members

    NARCIS (Netherlands)

    Beckers, D.G.J.; Hooff, M.L.M. van; Linden, D. van der; Kompier, M.A.J.; Taris, T.W.; Geurts, S.A.E.

    2008-01-01

    Objectives: This study aimed at opening up the black box of overtime work among university faculty members by providing information on (i) when faculty members work overtime, (ii) what activities are undertaken during overtime, and (iii) how overtime is experienced. Methods: Data were collected

  4. A diary study to open up the black box of overtime work among university faculty members

    NARCIS (Netherlands)

    Beckers, D.G.J.; Hooff, M.L.M. van; Linden, D. van der; Kompier, M.A.J.; Taris, T.W.; Geurts, S.A.E.

    2008-01-01

    Objectives - This study aimed at opening up the black box of overtime work among university faculty members by providing information on (i) when faculty members work overtime, (ii) what activities are undertaken during overtime, and (iii) how overtime is experienced. Methods - Data were collected

  5. Prediction of ionizing radiation effects in integrated circuits using black-box models

    International Nuclear Information System (INIS)

    Williamson, P.W.

    1976-10-01

    A method is described which allows general black-box modelling of integrated circuits as distinct from the existing method of deriving the radiation induced response of the model from actual terminal measurements on the device during irradiation. Both digital and linear circuits are discussed. (author)

  6. Upon opening the black box of participatory design and finding it filled with ethics

    NARCIS (Netherlands)

    Steen, M.G.D.

    2011-01-01

    In this essay, I bring together Participatory Design's (PD) tradition of critical reflection on one's own practices, and Science and Technology Studies' focus on specific activities ('opening the black box'), in order to explore the ethics of PD. Three different forms of ethics—ethics-of-theother,

  7. IT Decision Making in German Hospitals - Do CEOs Open the Black Box?

    Science.gov (United States)

    Thye, Johannes; Hübner, Ursula; Hüsers, Jens; Babitsch, Birgit

    2017-01-01

    Health IT and communication systems are indispensable in German hospitals for clinical as well as administrative process support. However, IT is often regarded as a "black box" for hospital CEOs. Thus, the question arises how can CEOs decide if they do not know what is in the box? In order to answer this question, half-structured interviews with 14 German hospital CEOs were conducted. They revealed three principle decision processes: the supported decision, the joint decision and the corporate level decision. In all cases, the hospital CEO and the CIO interacted to reach the final decision, most strongly in the joint decision mode and least strongly in the corporate decision mode. Only the joint decision mode definitely forced the CEO to open the "black box" of IT. In the era of digitalisation, however, CEOs must develop better competencies to decide over complex matters.

  8. Black, grey and white-box approaches to understanding catchment-wide hydrologic connectivity

    Science.gov (United States)

    Ali, G. A.; Roy, A. G.

    2009-12-01

    Connectivity is associated with nonlinear hydrological responses as it is believed to lead to drastic changes in the delivery of stormwater to the stream. Quantitative evidence of connectivity is therefore needed if the concept is to serve as a diagnostic tool for hydrologic behaviours. Recent publications advocate that geostatistical connectivity is a universal measure as it transcends catchment idiosyncracies and allows for the detection of transitions and thresholds in flow processes. Yet, the geostatistical framework failed to reflect threshold change in runoff response in a temperate humid forested catchment (Mont St-Hilaire, Quebec). In this study based on a forested catchment from the Canadian Shield (St-Hippolyte, Quebec), we use three types of hydrological data analysis in searching for evidence of connectivity: (1) statistical classification techniques applied to meteorological records and storm hydrographs; (2) end-member mixing computations performed on stream and source areas geochemistry; and (3) catchment-wide multiple-depths soil moisture data subjected to pattern analysis. These methods correspond respectively to black, grey and white-box approaches towards understanding connectivity. Since the methods can be discriminated by accessibility, physical basis, robustness and spatial discretization, results obtained are compared to assess catchment behavior and prediction uncertainty. The black-box approach reveals that catchment responses, labeled as low/high magnitude and slow/quick timing, can be predicted from meteorological thresholds. It yields indirect evidence of connectivity by suggesting that a relationship between response types and antecedent conditions can be found if assumed nonlinear. The grey-box approach is helpful in identifying time-variable contributing sources to streamflow. Intermediate discharge levels are fed by an enhanced near-surface riparian-stream connection, while both riparian and hillslope areas produce overland flow when

  9. Urban transport sustainability indicators: Application of Multi-View Black-Box (MVBB) framework

    OpenAIRE

    Hippu Salk Kristle Nathan; B. Sudhakara Reddy

    2011-01-01

    In a recent work Nathan and Reddy (2011a) have proposed a Multi-view Black-box (MVBB) framework for development of sustainable development indicators (SDIs) for an urban setup. The framework is flexible to be applied to any domain or sector of urban system. In this paper the proposed MVBB framework is applied for transportation sector of Mumbai city. The paper begins with a discussion on transportation sector and its unsustainability links and trends. It outlines the concept of sustainable tr...

  10. Thermal performances of a "black box" heat exchanger in district heating system

    Science.gov (United States)

    Genić, Srbislav B.; Jaćimović, Branislav M.; Milovančević, Uroš M.; Ivošević, Miloš M.; Otović, Milena M.; Antić, Milan I.

    2018-03-01

    The procedure for field testing of plate heat exchanger, considered as a black box, is presented in the paper. After the field measurements have been conducted, simple but unambiguous procedure has been used to establish heat performance parameters including the heat duty and fouling factor. Advantage of hereby presented method is that it can be used for analysis of any other similar heat transfer equipment.

  11. An assessment of Pakistani pharmacy and medical students’ knowledge of black box warnings

    OpenAIRE

    Murtaza,G.; Khan,S.A.; Murtaza (Junior),G.; Javed,K.; Akram,F.; Hamid,A.A.; Hussain,I.

    2014-01-01

    Food and Drug Administration delivers the black box warnings (BBW) which should appear on the leaflets of medicines for patient awareness and the prescription of drugs indicating its highly fatal adverse effects to human body. The aim of this study was to assess the knowledge of Pakistani pharmacy and medical students about BBW. A questionnaire containing contents about BBW was given to the 1st, 2nd and 3rd professional year pharmacy and medical students from different pharmacy and medical in...

  12. Design and Development of Black Box for Analyzing Accidents in Indian Railways

    Directory of Open Access Journals (Sweden)

    Alka DUBEY

    2010-03-01

    Full Text Available Black box also known as engine data recorder (EDR is a device for recording and analyzing train engine status for generation a report and analyzing train accidents. EDR is an application of embedded systems based on sensors, microcontroller, memory, serial interface and display unit. In the present paper designing of EDR with their technical specifications is provided. There railway electric engine WAP-7 is used in present study.

  13. Estimation parameters and black box model of a brushless DC motor

    Directory of Open Access Journals (Sweden)

    José A. Becerra-Vargas

    2014-08-01

    Full Text Available The modeling of a process or a plant is vital for the design of its control system, since it allows predicting its dynamic and behavior under different circumstances, inputs, disturbances and noise. The main objective of this work is to identify which model is best for a permanent magnet brushless DC specific motor. For this, the mathematical model of a DC motor brushless PW16D, manufactured by Golden Motor, is presented and compared with its black box model; both are derived from experimental data. These data, the average applied voltage and the angular velocity, are acquired by a data acquisition card and imported to the computer. The constants of the mathematical model are estimated by a curve fitting algorithm based on non-linear least squares and pattern search using computational tool. To estimate the mathematical model constants by non-linear least square and search pattern, a goodness of fit of 84.88% and 80.48% respectively was obtained. The goodness of fit obtained by the black box model was 87.72%. The mathematical model presented slightly lower goodness of fit, but allowed to analyze the behavior of variables of interest such as the power consumption and the torque applied to the motor. Because of this, it is concluded that the mathematical model obtained by experimental data of the brushless motor PW16D, is better than its black box model.

  14. Finding External Indicators of Load on a Web Server via Analysis of Black-Box Performance Measurements

    Science.gov (United States)

    Chiarini, Marc A.

    2010-01-01

    Traditional methods for system performance analysis have long relied on a mix of queuing theory, detailed system knowledge, intuition, and trial-and-error. These approaches often require construction of incomplete gray-box models that can be costly to build and difficult to scale or generalize. In this thesis, we present a black-box analysis…

  15. Recognition and Knowledge of Medications with Black Box Warnings Among Pediatricians and Emergency Physicians.

    Science.gov (United States)

    Smollin, Craig Geoffrey; Fu, Jonathan; Levin, Ross

    2016-06-01

    "Boxed warnings" (BW), sometimes referred to as "black box warnings," are the most serious level of warning provided by the Food and Drug Administration (FDA). We aimed to assess physician awareness and knowledge of BW, and to gain a better understanding of where physicians obtain information about serious adverse drug reactions for commonly prescribed medications. A cross-sectional survey instrument was administered to emergency medicine (EM) and pediatrician (Peds) attending and resident physicians. The main outcome measures were physician performance in identifying medications with and without black box warnings and the content of the warnings. The survey response rate was 81/198 (41 %). Respondents correctly identified medications with BW only 36.3 % of the time, but were able to correctly identify medications without such warnings 83.8 % of the time. Attending physicians were better able to identify medications with or without BW when compared with residents (p < 0.05). Among residents, there was a statistically significant increase in the ability to identify medications with or without BW with increasing year of training (p < 0.01). Correct identification of the content of BW was low in both groups (13.3 %). Only 19/50 (37 %) EM physicians and 16/31 (52 %) Peds reported that they consider BW when prescribing medications. 23/81 (29 %) respondents indicated that they did not stay current or had no method of staying current with black box information. EM and Peds attending and resident physicians at a single institution had limited ability to identify medications containing BW or the content of such warnings. A significant number reported that they did not stay current or had no consistent method for staying current with BW.

  16. Effect of image capture device on the accuracy of black-box printer models

    Science.gov (United States)

    Youn, Jason; Sun, Jian; Ju, Yanling; Kashti, Tamar; Frank, Tal; Kella, Dror; Fischer, Mani; Ulichney, Robert; Adams, Guy; Allebach, Jan

    2014-01-01

    In the process of electrophotograpic (EP) printing, the deposition of toner to the printer-addressable pixel is greatly influenced by the neighboring pixels of the digital halftone. To account for these effects, printer models can either be embedded in the halftoning algorithm, or used to predict the printed halftone image at the input to an algorithm that is used to assess print quality. Most recently,1 we developed a series of six new models to accurately account for local neighborhood effects and the influence of a 45 x 45 neighborhood of pixels on the central printer-addressable pixel. We refer to all these models as black-box models, since they are based solely on measuring what is on the printed page, and do not incorporate any information about the marking process itself. In this paper, we will compare black-box models developed with three different capture devices: an Epson Expression 10000XL (Epson America, Inc., Long Beach, CA, USA) flatbed scanner operated at 2400 dpi with an active field of view of 309.88 mm x 436.88 mm, a QEA PIAS-II (QEA, Inc., Billerica, MA, USA) camera with resolution 7663.4 dpi and a field of view of 2.4 mm x 3.2 mm, and Dr. CID, a 1:1 magnification 3.35 micron true resolution Dyson Relay lens-based 3 Mpixel USB CMOS imaging device2 with resolution 7946.8 dpi and a field of view of 4.91 mm 6.55 mm developed at Hewlett-Packard Laboratories { Bristol. Our target printer is an HP Indigo 5000 Digital Press (HP Indigo, Ness Ziona, Israel). In this paper, we will compare the accuracy of the black-box model predictions of print microstructure using models trained from images captured with these three devices.

  17. Unlocking the black box: line managers and HRM performance in a call centre context

    OpenAIRE

    Harney, Brian; Jordan, Claire

    2008-01-01

    Purpose – The purpose of this paper is to show the way to unlock the black box of HRM and performance linkages by exploring one of the key variables that mediates the link, namely whether line managers can stimulate improvements in firm performance by eliciting appropriate employee outcomes in a call centre context. Design/methodology/approach – The research draws on Purcell's "People-Performance Model" as a sensitising framework to inform an in-depth case study of a call centre. This pro...

  18. Are the program packages for molecular structure calculations really black boxes?

    Directory of Open Access Journals (Sweden)

    ANA MRAKOVIC

    2007-12-01

    Full Text Available In this communication it is shown that the widely held opinion that compact program packages for quantum–mechanical calculations of molecular structure can safely be used as black boxes is completely wrong. In order to illustrate this, the results of computations of equilibrium bond lengths, vibrational frequencies and dissociation energies for all homonuclear diatomic molecules involving the atoms from the first two rows of the Periodic Table, performed using the Gaussian program package are presented. It is demonstrated that the sensible use of the program requires a solid knowledge of quantum chemistry.

  19. Chips in black boxes? Convenience life span, parafood, brandwidth, families, and co-creation.

    Science.gov (United States)

    Jacobs, Marc

    2015-11-01

    Any consumer who opens a bag of potato or corn chips (or crisps in the UK) knows there is no time to waste to enjoy or share them. The convenience life span of chips is limited: it is the shelf or storage life and a very limited time once outside the bag. Many technologies converge to generate the desired effect as a black box, not only of the packaging but also of the chips themselves. The concept of paratext can be applied to printed messages on the package, including the brand name and other texts like advertising (epitexts), which can be expanded into the concept of parafood. These concepts help to discuss technological developments and interpret why this has recently become a negotiation zone for co-creation (see the Do us a flavor campaigns). They are symptoms of changing relations between production, research and development, marketing, and consumption. This paper pays special attention to back stories, underdog brand biographies and narratives about origin. The concept of brandwidth is introduced to sensitize about the limits of combining different stories about chips. A recent brand biography, a family history and a cookery book are used to discuss the phenomenon of cooking with Fritos. Together with the concepts of parafood, brandwidth and black boxes, more reflection and dialogue about the role of history and heritage in marketing put new challenging perspectives on the agenda. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Opening the black box of quality improvement collaboratives: an Actor-Network theory approach

    Directory of Open Access Journals (Sweden)

    Broer Tineke

    2010-09-01

    Full Text Available Abstract Background Quality improvement collaboratives are often labeled as black boxes because effect studies usually do not describe exactly how the results were obtained. In this article we propose a way of opening such a black box, by taking up a dynamic perspective based on Actor-Network Theory. We thereby analyze how the problematisation process and the measurement practices are constructed. Findings from this analysis may have consequences for future evaluation studies of collaboratives. Methods In an ethnographic design we probed two projects within a larger quality improvement collaborative on long term mental health care and care for the intellectually disabled. Ethnographic observations were made at nine national conferences. Furthermore we conducted six case studies involving participating teams. Additionally, we interviewed the two program leaders of the overall projects. Results In one project the problematisation seemed to undergo a shift of focus away from the one suggested by the project leaders. In the other we observed multiple roles of the measurement instrument used. The instrument did not only measure effects of the improvement actions but also changed these actions and affected the actors involved. Conclusions Effectiveness statistics ideally should be complemented with an analysis of the construction of the collaborative and the improvement practices. Effect studies of collaboratives could benefit from a mixed methods research design that combines quantitative and qualitative methods.

  1. Strategies for the prescription of psychotropic drugs with black box warnings.

    Science.gov (United States)

    Stevens, Jonathan R; Jarrahzadeh, Tiana; Brendel, Rebecca Weintraub; Stern, Theodore A

    2014-01-01

    The Black Box Warning (BBW) is the Food and Drug Administration's highest level of drug warning. It signifies that a medication has serious (or potentially life-threatening) side effects and is prominently displayed on a medication's package insert. It literally consists of the medication warning and is surrounded by a bold black border. This article aims to review data related to BBWs on psychotropic medications currently used in clinical practice, with special attention to clinical situations and questions relevant to consultation-liaison psychiatrists. We review 3 clinical advisories or BBWs for psychotropic medications (i.e., antidepressant medication and suicidality in the pediatric population, stimulant medication and sudden death in the pediatric population, and antipsychotic medication and increased mortality in the elderly) and discuss the effect they have had on prescribing practices. We provide a table of current BBWs relevant to psychotropic medications. BBWs can have unintended and far-reaching consequences, albeit with a limited ability to target specific populations and practice patterns. Although it is critical for clinicians to be aware of these serious potential side effects and to inform patients about these warnings, medications with boxed warnings remain Food and Drug Administration-approved and may have critically important therapeutic roles. © 2014 Published by Academy of Psychosomatic Medicine on behalf of Academy of Psychosomatic Medicine.

  2. Performance improvement CME in psychiatry: implementing black box warning informed consent

    Directory of Open Access Journals (Sweden)

    David Mintz

    2014-06-01

    Full Text Available Objective. Performance improvement continuing medical education (PI CME is a recent educational methodology designed better to link educational content and outcomes in the context of limitations in the effectiveness of traditional CME. This study examines the ease of use and effectiveness of psychiatric CME in a small hospital. Methods. All staff psychopharmacologists assessed their performance in providing informed consent of black box risks of prescribed psychiatric medications in a 3-month period. Staff were educated regarding black box risks of all commonly prescribed psychiatric medications, and their performance in the following quarter was reassessed. Significance of change following the educational intervention at 3 and 6 months was determined by Chi square analysis. Results. PI CME was clearly successful in supporting behaviour change, χ2(1, N=60 =20.86, p=0.000, far outstripping traditional CME efforts. Changes in behaviour persisted over time, χ2(1, N=61=4.04, p=0.044. This PI CME event received the highest possible rating by CME participants, and took few staff resources to implement. Conclusions. PI CME is an educational technology that can be carried out, without significant burdens to participants or educators, in psychiatric departments of small hospitals. PI CME can be much more effective than traditional CME in bringing about desired behaviour change in psychiatrist behaviours. Hospital-based PI CME may have other benefits, such as meeting criteria for Maintenance of Certification.

  3. Ten years after the FDA black box warning for antidepressant drugs: a critical narrative review

    Directory of Open Access Journals (Sweden)

    Juan Carlos Martínez-Aguayo

    2016-06-01

    Full Text Available ABSTRACT Background The United States Food and Drug Administration (FDA has warned about the increased suicidality risk associated with the use of selective serotonin reuptake inhibitors (SSRI and venlafaxine in children and adolescents. Objectives To critically appraise the available evidence supporting the FDA Black box warning concerning to the use of antidepressants in child and adolescents. Methods A critical review of articles in Medline/PubMed and SciELO databases regarding the FDA Black box warning for antidepressants, and the impact of FDA warnings on antidepressant prescriptions and suicide rates. Results The warning was based on surveys that did not report either cases of suicide nor a significant difference supporting an increased suicidality rate. The concept was defined in an ambiguous way and there is currently more available evidence to support such definition. The use of SSRI and venlafaxine has been associated to lower suicidality rates, but the prescription fall due to the warning increased suicide rates. Discussion Suicidality is an inherent feature of depressive disorders so it would be desirable to consider how much of the phenomenon may be attributed to antidepressants per se. It would be appropriate to consider that suicide rates might increase also as a consequence of the warning.

  4. Perancangan Prototipe Receiver Beacon Black Box Locator Acoustic 37,5 kHz Pingers

    Directory of Open Access Journals (Sweden)

    RUSTAMAJI RUSTAMAJI

    2016-02-01

    Full Text Available ABSTRAK Ketika suatu pesawat terbang mengalami kecelakaan terjatuh ke dalam air, maka lokasi keberadaannya dapat dideteksi oleh alat yang disebut receiver beacon black box locator acoustic (pingers receiver. Pingers receiver berfungsi untuk menerima sinyal dengan frekuensi 37,5 kHz ± 1 kHz dari pingers transmitter atau Underwater Locator Beacon (ULB yang berada pada black box pesawat. Dalam penelitian ini dibuat perancangan pingers receiver yang tersusun dari rangkaian Band Pass Filter (BPF, detektor selubung, penguat audio, dan loud speaker. Frekuensi sinyal 37,5 kHz ± 1 kHz yang dikirim oleh pingers transmitter akan diterima oleh pingers receiver, dimana tahap pertama melewati rangkaian Band Pass Filter (BPF selanjutnya sinyal akan dideteksi oleh detektor selubung untuk mengambil kembali sinyal informasi yang berupa sinyal pulsa dengan lebar pulsa 10 milidetik dan interval 1 detik sebagai sinyal pingers yang nantinya mampu didengar oleh telinga manusia. Berdasarkan perancangan yang telah dibuat, output sinyal yang dihasilkan oleh prototipe pingers receiver tersebut memiliki lebar pulsa 14 milidetik dengan interval 1 detik. Kata kunci: pingers receiver, band pass filter (BPF, detektor selubung, loud speaker. ABSTRACT When an aircraft caught in an accident and crashes into the water, its location can be detected using a device called a receiver beacon black box locator acoustic (pingers receiver. The pingers receiver functioned as a reciever signal with 37,5 kHz ± 1 kHz frequency from trnasmitter pingers or Underwater Locator Beacon (ULB which is on air plane black blox. In this research made design pingers receiver composed of a series of  Band Pass Filter (BPF, envelope detector, audio amplifier, and loud speaker. The signal of 37,5 kHz ± 1 kHz  frequency sent by pingers transmitter will bereceived by pingers receiver, after which the signal will be processed by the Band Pass Filter (BPF circuit before being detected by envelope detector

  5. Acting on black box warnings requires a GRADE evidence table and an implementation guide: the case of teriparatide.

    Science.gov (United States)

    Elraiyah, Tarig; Gionfriddo, Michael R; Murad, Mohammad Hassan

    2015-06-01

    To assess how well do the black box warnings present and communicate evidence in a way that is consistent with evidence-based patient-centered practice, through evaluating the boxed warning on teriparatide-induced osteosarcoma. We critically appraised teriparatide black box warning for osteosarcoma by reviewing human and animal studies that were used as basis for the warning. We also evaluated the quality of the evidence using the Grading of Recommendations Assessment, Development and Evaluation framework. We found that this warning was based on very low-quality evidence that was derived primarily from animal studies. The quality of evidence was rated down because of high risk of bias in addition to inconsistency, indirectness, and imprecision of the estimates. The warning does not provide sufficient guidance for practice like an implementation tool or an evidence profile to clarify the limitations of the evidence. Black box warning for teriparatide-associated osteosarcoma does not explicitly present the quality of evidence, and therefore, it could be of limited use in evidence-based practice. We propose that black box warnings should include an evidence profile and an implementation guide to be more useful in evidence-based patient-centered practice. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Opening the Black Box of Electronic Health: Collecting, Analyzing, and Interpreting Log Data.

    Science.gov (United States)

    Sieverink, Floor; Kelders, Saskia; Poel, Mannes; van Gemert-Pijnen, Lisette

    2017-08-07

    In electronic health (eHealth) research, limited insight has been obtained on process outcomes or how the use of technology has contributed to the users' ability to have a healthier life, improved well-being, or activate new attitudes in their daily tasks. As a result, eHealth is often perceived as a black box. To open this black box of eHealth, methodologies must extend beyond the classic effect evaluations. The analyses of log data (anonymous records of real-time actions performed by each user) can provide continuous and objective insights into the actual usage of the technology. However, the possibilities of log data in eHealth research have not been exploited to their fullest extent. The aim of this paper is to describe how log data can be used to improve the evaluation and understand the use of eHealth technology with a broader approach than only descriptive statistics. This paper serves as a starting point for using log data analysis in eHealth research. Here, we describe what log data is and provide an overview of research questions to evaluate the system, the context, the users of a technology, as well as the underpinning theoretical constructs. We also explain the requirements for log data, the starting points for the data preparation, and methods for data collection. Finally, we describe methods for data analysis and draw a conclusion regarding the importance of the results for both scientific and practical applications. The analysis of log data can be of great value for opening the black box of eHealth. A deliberate log data analysis can give new insights into how the usage of the technology contributes to found effects and can thereby help to improve the persuasiveness and effectiveness of eHealth technology and the underpinning behavioral models. ©Floor Sieverink, Saskia Kelders, Mannes Poel, Lisette van Gemert-Pijnen. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 07.08.2017.

  7. Black-box Brain Experiments, Causal Mathematical Logic, and the Thermodynamics of Intelligence

    Science.gov (United States)

    Pissanetzky, Sergio; Lanzalaco, Felix

    2013-12-01

    Awareness of the possible existence of a yet-unknown principle of Physics that explains cognition and intelligence does exist in several projects of emulation, simulation, and replication of the human brain currently under way. Brain simulation projects define their success partly in terms of the emergence of non-explicitly programmed biophysical signals such as self-oscillation and spreading cortical waves. We propose that a recently discovered theory of Physics known as Causal Mathematical Logic (CML) that links intelligence with causality and entropy and explains intelligent behavior from first principles, is the missing link. We further propose the theory as a roadway to understanding more complex biophysical signals, and to explain the set of intelligence principles. The new theory applies to information considered as an entity by itself. The theory proposes that any device that processes information and exhibits intelligence must satisfy certain theoretical conditions irrespective of the substrate where it is being processed. The substrate can be the human brain, a part of it, a worm's brain, a motor protein that self-locomotes in response to its environment, a computer. Here, we propose to extend the causal theory to systems in Neuroscience, because of its ability to model complex systems without heuristic approximations, and to predict emerging signals of intelligence directly from the models. The theory predicts the existence of a large number of observables (or "signals"), all of which emerge and can be directly and mathematically calculated from non-explicitly programmed detailed causal models. This approach is aiming for a universal and predictive language for Neuroscience and AGI based on causality and entropy, detailed enough to describe the finest structures and signals of the brain, yet general enough to accommodate the versatility and wholeness of intelligence. Experiments are focused on a black-box as one of the devices described above of which

  8. The effects of massive graviton on the equilibrium between the black hole and radiation gas in an isolated box

    Directory of Open Access Journals (Sweden)

    Ya-Peng Hu

    2017-09-01

    Full Text Available It is well known that the black hole can have temperature and radiate the particles with black body spectrum, i.e. Hawking radiation. Therefore, if the black hole is surrounded by an isolated box, there is a thermal equilibrium between the black hole and radiation gas. A simple case considering the thermal equilibrium between the Schwarzschild black hole and radiation gas in an isolated box has been well investigated previously in detail, i.e. taking the conservation of energy and principle of maximal entropy for the isolated system into account. In this paper, following the above spirit, the effects of massive graviton on the thermal equilibrium will be investigated. For the gravity with massive graviton, we will use the de Rham–Gabadadze–Tolley (dRGT massive gravity which has been proven to be ghost free. Because the graviton mass depends on two parameters in the dRGT massive gravity, here we just investigate two simple cases related to the two parameters, respectively. Our results show that in the first case the massive graviton can suppress or increase the condensation of black hole in the radiation gas although the T–E diagram is similar as the Schwarzschild black hole case. For the second case, a new T–E diagram has been obtained. Moreover, an interesting and important prediction is that the condensation of black hole just increases from the zero radius of horizon in this case, which is very different from the Schwarzschild black hole case.

  9. Stochastic Simulation of Integrated Circuits with Nonlinear Black-Box Components via Augmented Deterministic Equivalents

    Directory of Open Access Journals (Sweden)

    MANFREDI, P.

    2014-11-01

    Full Text Available This paper extends recent literature results concerning the statistical simulation of circuits affected by random electrical parameters by means of the polynomial chaos framework. With respect to previous implementations, based on the generation and simulation of augmented and deterministic circuit equivalents, the modeling is extended to generic and ?black-box? multi-terminal nonlinear subcircuits describing complex devices, like those found in integrated circuits. Moreover, based on recently-published works in this field, a more effective approach to generate the deterministic circuit equivalents is implemented, thus yielding more compact and efficient models for nonlinear components. The approach is fully compatible with commercial (e.g., SPICE-type circuit simulators and is thoroughly validated through the statistical analysis of a realistic interconnect structure with a 16-bit memory chip. The accuracy and the comparison against previous approaches are also carefully established.

  10. Black-Box Accumulation: Collecting Incentives in a Privacy-Preserving Way

    Directory of Open Access Journals (Sweden)

    Jager Tibor

    2016-07-01

    Full Text Available We formalize and construct black-box accumulation (BBA, a useful building block for numerous important user-centric protocols including loyalty systems, refund systems, and incentive systems (as, e.g., employed in participatory sensing and vehicle-to-grid scenarios. A core requirement all these systems share is a mechanism to let users collect and sum up values (call it incentives, bonus points, reputation points, etc. issued by some other parties in a privacy-preserving way such that curious operators may not be able to link the different transactions of a user. At the same time, a group of malicious users may not be able to cheat the system by pretending to have collected a higher amount than what was actually issued to them.

  11. Separating the early universe from the late universe: Cosmological parameter estimation beyond the black box

    International Nuclear Information System (INIS)

    Tegmark, Max; Zaldarriaga, Matias

    2002-01-01

    We present a method for measuring the cosmic matter budget without assumptions about speculative early Universe physics, and for measuring the primordial power spectrum P * (k) nonparametrically, either by combining CMB and LSS information or by using CMB polarization. Our method complements currently fashionable 'black box' cosmological parameter analysis, constraining cosmological models in a more physically intuitive fashion by mapping measurements of CMB, weak lensing and cluster abundance into k space, where they can be directly compared with each other and with galaxy and Lyα forest clustering. Including the new CBI results, we find that CMB measurements of P(k) overlap with those from 2dF galaxy clustering by over an order of magnitude in scale, and even overlap with weak lensing measurements. We describe how our approach can be used to raise the ambition level beyond cosmological parameter fitting as data improves, testing rather than assuming the underlying physics

  12. Surgical videos for accident analysis, performance improvement, and complication prevention: time for a surgical black box?

    Science.gov (United States)

    Gambadauro, Pietro; Magos, Adam

    2012-03-01

    Conventional audit of surgical records through review of surgical results provides useful knowledge but hardly helps identify the technical reasons lying behind specific outcomes or complications. Surgical teams not only need to know that a complication might happen but also how and when it is most likely to happen. Functional awareness is therefore needed to prevent complications, know how to deal with them, and improve overall surgical performance. The authors wish to argue that the systematic recording and reviewing of surgical videos, a "surgical black box," might improve surgical care, help prevent complications, and allow accident analysis. A possible strategy to test this hypothesis is presented and discussed. Recording and reviewing surgical interventions, apart from helping us achieve functional awareness and increasing the safety profile of our performance, allows us also to effectively share our experience with colleagues. The authors believe that those potential implications make this hypothesis worth testing.

  13. Opening the black box of ethics policy work: evaluating a covert practice.

    Science.gov (United States)

    Frolic, Andrea; Drolet, Katherine; Bryanton, Kim; Caron, Carole; Cupido, Cynthia; Flaherty, Barb; Fung, Sylvia; McCall, Lori

    2012-01-01

    Hospital ethics committees (HECs) and ethicists generally describe themselves as engaged in four domains of practice: case consultation, research, education, and policy work. Despite the increasing attention to quality indicators, practice standards, and evaluation methods for the other domains, comparatively little is known or published about the policy work of HECs or ethicists. This article attempts to open the "black box" of this health care ethics practice by providing two detailed case examples of ethics policy reviews. We also describe the development and application of an evaluation strategy to assess the quality of ethics policy review work, and to enable continuous improvement of ethics policy review processes. Given the potential for policy work to impact entire patient populations and organizational systems, it is imperative that HECs and ethicists develop clearer roles, responsibilities, procedural standards, and evaluation methods to ensure the delivery of consistent, relevant, and high-quality ethics policy reviews.

  14. Interpreting Black-Box Classifiers Using Instance-Level Visual Explanations

    Energy Technology Data Exchange (ETDEWEB)

    Tamagnini, Paolo; Krause, Josua W.; Dasgupta, Aritra; Bertini, Enrico

    2017-05-14

    To realize the full potential of machine learning in diverse real- world domains, it is necessary for model predictions to be readily interpretable and actionable for the human in the loop. Analysts, who are the users but not the developers of machine learning models, often do not trust a model because of the lack of transparency in associating predictions with the underlying data space. To address this problem, we propose Rivelo, a visual analytic interface that enables analysts to understand the causes behind predictions of binary classifiers by interactively exploring a set of instance-level explanations. These explanations are model-agnostic, treating a model as a black box, and they help analysts in interactively probing the high-dimensional binary data space for detecting features relevant to predictions. We demonstrate the utility of the interface with a case study analyzing a random forest model on the sentiment of Yelp reviews about doctors.

  15. Impact of implementing alerts about medication black-box warnings in electronic health records.

    Science.gov (United States)

    Yu, Donghui Tony; Seger, Diane L; Lasser, Karen E; Karson, Andrew S; Fiskio, Julie M; Seger, Andrew C; Bates, David W

    2011-02-01

    The Food and Drug Administration issues black-box warnings (BBWs) regarding medications with serious risks, yet physician adherence to the warnings is low. We evaluated the impact of delivering BBW-based alerts about drug-drug, drug-disease, and drug-laboratory interactions for prescription medications in outpatients in an electronic health record with clinical decision support. We compared the frequency of non-adherence to all BBWs about drug-drug, drug-disease, and drug-laboratory interactions for 30 drugs/drug classes, and by individual drugs/drug groups with BBWs between the pre- and post-intervention periods. We used multivariate analysis to identify independent risk factors for non-adherence to BBWs. There was a slightly higher frequency of non-adherence to BBWs after the intervention (4.8% vs. 5.1%, p=0.045). In multivariate analyses, after adjustment for patient and provider characteristics and site of care, medications prescribed during the pre-intervention period were less likely to violate BBWs compared to those prescribed during the post-intervention period (OR 0.67, 95% CI, 0.47-0.96). However, black-box warning violations did decrease after the intervention for BBWs about drug-drug interactions (6.1% vs. 1.8%, p<0.0001) and drug-pregnancy interactions (5.1% vs. 3.6%, p=0.01). Ambulatory care computerized order entry with prescribing alerts about BBWs did not improve clinicians' overall adherence to BBWs, though it did improve adherence for specific clinically important subcategories. Copyright © 2010 John Wiley & Sons, Ltd.

  16. The black box in somatization: unexplained physical symptoms, culture, and narratives of trauma.

    Science.gov (United States)

    Waitzkin, H; Magaña, H

    1997-09-01

    Stimulated by our clinical work with patients who manifest unexplained "somatoform" symptoms in the primary care setting, this article addresses a theoretical black box in our understanding of somatization: how does culture mediate severe stress to produce symptoms that cannot be explained by the presence of physical illness? Despite various problems in his explanation of hysteria, Freud broke new ground by emphasizing narratives of traumatic experiences in the development and treatment of unexplained physical symptoms. Except in anthropologically oriented cultural psychiatry, contemporary psychiatry has traveled away from a focus on narrative in the study of somatization. On the other hand, recent interest in narrative has spread across many intellectual disciplines, including the humanities and literary criticism, psychology, history, anthropology, and sociology. We operationally define narratives as attempts at storytelling that portray the interrelationships among physical symptoms and the psychologic, social, or cultural context of these symptoms. Regarding somatization and trauma, we focus on the ways that narrative integrates the cultural context with traumatic life events. In explaining the black box, we postulate that extreme stress (torture, rape, witnessing deaths of relatives, forced migration, etc.) is processed psychologically as a terrible, largely incoherent narrative of events too awful to hold in consciousness. Culture patterns the psychologic and somatic expression of the terrible narrative. Methodologically, we have developed some techniques for eliciting narratives of severe stress and somatic symptoms, which we illustrate with observations from an ongoing research project. In designing interventions to improve the care of somatizing patients, we are focusing on the creation of social situations where patients may feel empowered to express more coherent narratives of their prior traumatic experiences.

  17. New and incremental FDA black box warnings from 2008 to 2015.

    Science.gov (United States)

    Solotke, Michael T; Dhruva, Sanket S; Downing, Nicholas S; Shah, Nilay D; Ross, Joseph S

    2018-02-01

    The boxed warning (also known as 'black box warning [BBW]') is one of the strongest drug safety actions that the U.S. Food & Drug Administration (FDA) can implement, and often warns of serious risks. The objective of this study was to comprehensively characterize BBWs issued for drugs after FDA approval. We identified all post-marketing BBWs from January 2008 through June 2015 listed on FDA's MedWatch and Drug Safety Communications websites. We used each drug's prescribing information to classify its BBW as new, major update to a preexisting BBW, or minor update. We then characterized these BBWs with respect to pre-specified BBW-specific and drug-specific features. There were 111 BBWs issued to drugs on the US market, of which 29% (n = 32) were new BBWs, 32% (n = 35) were major updates, and 40% (n = 44) were minor updates. New BBWs and major updates were most commonly issued for death (51%) and cardiovascular risk (27%). The new BBWs and major updates impacted 200 drug formulations over the study period, of which 64% were expected to be used chronically and 58% had available alternatives without a BBW. New BBWs and incremental updates to existing BBWs are frequently added to drug labels after regulatory approval.

  18. The electronic view box: a software tool for radiation therapy treatment verification

    International Nuclear Information System (INIS)

    Bosch, Walter R.; Low, Daniel A.; Gerber, Russell L.; Michalski, Jeff M.; Graham, Mary V.; Perez, Carlos A.; Harms, William B.; Purdy, James A.

    1995-01-01

    Purpose: We have developed a software tool for interactively verifying treatment plan implementation. The Electronic View Box (EVB) tool copies the paradigm of current practice but does so electronically. A portal image (online portal image or digitized port film) is displayed side by side with a prescription image (digitized simulator film or digitally reconstructed radiograph). The user can measure distances between features in prescription and portal images and 'write' on the display, either to approve the image or to indicate required corrective actions. The EVB tool also provides several features not available in conventional verification practice using a light box. Methods and Materials: The EVB tool has been written in ANSI C using the X window system. The tool makes use of the Virtual Machine Platform and Foundation Library specifications of the NCI-sponsored Radiation Therapy Planning Tools Collaborative Working Group for portability into an arbitrary treatment planning system that conforms to these specifications. The present EVB tool is based on an earlier Verification Image Review tool, but with a substantial redesign of the user interface. A graphical user interface prototyping system was used in iteratively refining the tool layout to allow rapid modifications of the interface in response to user comments. Results: Features of the EVB tool include 1) hierarchical selection of digital portal images based on physician name, patient name, and field identifier; 2) side-by-side presentation of prescription and portal images at equal magnification and orientation, and with independent grayscale controls; 3) 'trace' facility for outlining anatomical structures; 4) 'ruler' facility for measuring distances; 5) zoomed display of corresponding regions in both images; 6) image contrast enhancement; and 7) communication of portal image evaluation results (approval, block modification, repeat image acquisition, etc.). Conclusion: The EVB tool facilitates the rapid

  19. Prompt gamma activation analysis and time of flight neutron diffraction on 'black boxes' in the 'Ancient Charm' project

    International Nuclear Information System (INIS)

    Kasztovszky, Zs.; Kis, Z.; Belgya, T.; Kirfel, A.; Biro, K.T.

    2008-01-01

    The aim of the 'Ancient Charm' project is combining neutron tomography, prompt gamma activation analysis, time of flight neutron diffraction and neutron resonance transmission to generate elemental, and phase compositions of complex museum objects in 3D. To develop a protocol for such investigations, complex test samples were constructed and then analyzed by each method. The 'black boxes' are sealed iron and aluminum walled cubes, containing 2D or 3D arrangements of materials relevant for the compositions of archaeological samples. The experimental results obtained from bulk PGAA at BNC and TOF-ND at ISIS on two selected boxes are reported. (author)

  20. Beyond opening up the black box: Investigating the role of algorithmic systems in Wikipedian organizational culture

    Directory of Open Access Journals (Sweden)

    R Stuart Geiger

    2017-09-01

    Full Text Available Scholars and practitioners across domains are increasingly concerned with algorithmic transparency and opacity, interrogating the values and assumptions embedded in automated, black-boxed systems, particularly in user-generated content platforms. I report from an ethnography of infrastructure in Wikipedia to discuss an often understudied aspect of this topic: the local, contextual, learned expertise involved in participating in a highly automated social–technical environment. Today, the organizational culture of Wikipedia is deeply intertwined with various data-driven algorithmic systems, which Wikipedians rely on to help manage and govern the “anyone can edit” encyclopedia at a massive scale. These bots, scripts, tools, plugins, and dashboards make Wikipedia more efficient for those who know how to work with them, but like all organizational culture, newcomers must learn them if they want to fully participate. I illustrate how cultural and organizational expertise is enacted around algorithmic agents by discussing two autoethnographic vignettes, which relate my personal experience as a veteran in Wikipedia. I present thick descriptions of how governance and gatekeeping practices are articulated through and in alignment with these automated infrastructures. Over the past 15 years, Wikipedian veterans and administrators have made specific decisions to support administrative and editorial workflows with automation in particular ways and not others. I use these cases of Wikipedia’s bot-supported bureaucracy to discuss several issues in the fields of critical algorithms studies; critical data studies; and fairness, accountability, and transparency in machine learning—most principally arguing that scholarship and practice must go beyond trying to “open up the black box” of such systems and also examine sociocultural processes like newcomer socialization.

  1. The molybdenum blue reaction for the determination of orthophosphate revisited: Opening the black box

    Energy Technology Data Exchange (ETDEWEB)

    Nagul, Edward A. [School of Chemistry, The University of Melbourne, Victoria 3010 (Australia); Centre for Aquatic Pollution Identification and Management (CAPIM), The University of Melbourne, Victoria 3010 (Australia); McKelvie, Ian D. [School of Chemistry, The University of Melbourne, Victoria 3010 (Australia); School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL48AA (United Kingdom); Worsfold, Paul [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL48AA (United Kingdom); Kolev, Spas D., E-mail: s.kolev@unimelb.edu.au [School of Chemistry, The University of Melbourne, Victoria 3010 (Australia); Centre for Aquatic Pollution Identification and Management (CAPIM), The University of Melbourne, Victoria 3010 (Australia)

    2015-08-26

    The molybdenum blue reaction, used predominantly for the determination of orthophosphate in environmental waters, has been perpetually modified and re-optimised over the years, but this important reaction in analytical chemistry is usually treated as something of a 'black box' in the analytical literature. A large number of papers describe a wide variety of reaction conditions and apparently different products (as determined by UV–visible spectroscopy) but a discussion of the chemistry underlying this behaviour is often addressed superficially or not at all. This review aims to rationalise the findings of the many 'optimised' molybdenum blue methods in the literature, mainly for environmental waters, in terms of the underlying polyoxometallate chemistry and offers suggestions for the further enhancement of this time-honoured analytical reaction. - Highlights: • Molybdenum blue chemistry for orthophosphate determination is discussed. • The choice of reductant determines the blue product(s) obtained. • Mechanisms are described for various additive and subtractive interferents. • The choice of strong mineral acid for the reaction should be considered. • Detailed recommendations are made for method optimisation.

  2. Black-Box Optimization for Buildings and Its Enhancement by Advanced Communication Infrastructure

    Directory of Open Access Journals (Sweden)

    Dimitrios V. ROVAS

    2013-08-01

    Full Text Available The solution of repeated fixed-horizon trajectory optimization problems of processes that are either too difficult or too complex to be described by physics-based models can pose formidable challenges. Very often, soft-computing methods   e.g. black-box modeling and evolutionary optimization   are used. These approaches are ineffective or even computationally intractable for searching high-dimensional parameter spaces. In this paper, a structured iterative process is described for addressing such problems: the starting point is a simple parameterization of the trajectory starting with a reduced number of parameters; after selection of values for these parameters so that this simpler problem is covered satisfactorily, a refinement procedure increases the number of parameters and the optimization is repeated. This continuous parameter refinement and optimization process can yield effective solutions after only a few iterations. To illustrate the applicability of the proposed approach we investigate the problem of dynamic optimization of the operation of HVAC (heating, ventilation, and air conditioning systems, and illustrative simulation results are presented. Finally, the development of advanced communication and interoperability components is described, addressing the problem of how the proposed algorithm could be deployed in realistic contexts.

  3. Perspectives on the policy 'black box': a comparative case study of orthopaedics services in England.

    Science.gov (United States)

    McLeod, Hugh; Millar, Ross; Goodwin, Nick; Powell, Martin

    2014-10-01

    There has been much recent debate on the impact of competition on the English National Health Service (NHS). However, studies have tended to view competition in isolation and are controversial. This study examines the impact of programme theories associated with the health system reforms, which sought to move from a dominant target-led 'central control' programme theory, to one based on 'market forces', on orthopaedics across six case-study local health economies. It draws on a realistic evaluation approach to open up the policy 'black box' across different contexts using a mixed methods approach: analysis of 152 interviews with key informants and analysis of waiting times and admissions. We find that the urban health economies were more successful in reaching the access targets than the rural health economies, although the gap in performance closed over time. Most interviewees were aware of the policies to increase choice and competition, but their role appeared comparatively weak. Local commissioners' ability to influence demand appeared limited with providers' incentives dominating service delivery. Looking forward, it is clear that the role of competition in the NHS has to be considered alongside, rather than in isolation from, other policy mechanisms.

  4. More black box to explore: how quality improvement collaboratives shape practice change.

    Science.gov (United States)

    Shaw, Eric K; Chase, Sabrina M; Howard, Jenna; Nutting, Paul A; Crabtree, Benjamin F

    2012-01-01

    Quality improvement collaboratives (QICs) are used extensively to promote quality improvement in health care. Evidence of their effectiveness is limited, prompting calls to "open up the black box" to better understand how and why such collaboratives work. We selected a cohort of 5 primary care practices that participated in a 6-month intervention study aimed at improving colorectal cancer screening rates. Using an immersion/crystallization technique, we analyzed qualitative data that included audio recordings and field notes of QICs and practice-based team meetings. Three themes emerged from our analysis: (1) practice staff became empowered through and drew on the QICs to advance change efforts in the face of leader/physician resistance; (2) a mix of content and media in the QIC program was important for reaching all participants; (3) resources offered at the QIC did little to spur practice change efforts. QICs offer a potentially powerful way of disseminating health care innovations through enhanced strategies for learning and change. Creating collaborative environments in which diverse participants learn, listen, reflect, and share together can enable them to take back to their own organizations key messages and change strategies that benefit them the most.

  5. An adaptive metamodel-based global optimization algorithm for black-box type problems

    Science.gov (United States)

    Jie, Haoxiang; Wu, Yizhong; Ding, Jianwan

    2015-11-01

    In this article, an adaptive metamodel-based global optimization (AMGO) algorithm is presented to solve unconstrained black-box problems. In the AMGO algorithm, a type of hybrid model composed of kriging and augmented radial basis function (RBF) is used as the surrogate model. The weight factors of hybrid model are adaptively selected in the optimization process. To balance the local and global search, a sub-optimization problem is constructed during each iteration to determine the new iterative points. As numerical experiments, six standard two-dimensional test functions are selected to show the distributions of iterative points. The AMGO algorithm is also tested on seven well-known benchmark optimization problems and contrasted with three representative metamodel-based optimization methods: efficient global optimization (EGO), GutmannRBF and hybrid and adaptive metamodel (HAM). The test results demonstrate the efficiency and robustness of the proposed method. The AMGO algorithm is finally applied to the structural design of the import and export chamber of a cycloid gear pump, achieving satisfactory results.

  6. Inside the black box: Modeling "Life Writing" for lifelong health and well being.

    Science.gov (United States)

    Sabir, Myra; Johnson, Margaret A

    2018-02-13

    We articulate the lifespan theory of change by which an attachment-focused integrative reminiscence intervention, "Life Writing", is expected to interrupt the continuing problem of insecure attachment in adults and reverse associated reduced health and well-being outcomes. Based on preliminary studies and previous research, Life Writing is expected to foster earned-secure attachment in adults who work through subjective memories of unresolved attachment trauma. Roughly two decades of research on integrative reminiscence interventions like Life Writing show their consistent and wide-ranging positive impact. However, the bulk of this research demonstrates that such programs work, without also clarifying how they work, leaving unanswered questions as to how change occurs and how benefits might continue to accrue to participants through the lifespan. This represents what are known as "black box" effects. A program and evaluation planning tool, The Netway, was used to 1) identify hypothesized links between program inputs, activities, outputs, outcomes, and long-term impacts; 2) to clarify the underlying assumptions related to the program's success; and 3) to consider the appropriate contexts for the program. The logic model presented here articulates the hypothesized causal pathway from insecure to earned-secure attachment, in preparation for rigorous empirical tests of the program's lifespan theory of change. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Gene expression profiling--Opening the black box of plant ecosystem responses to global change

    Energy Technology Data Exchange (ETDEWEB)

    Leakey, A.D.B.; Ainsworth, E.A.; Bernard, S.M.; Markelz, R.J.C.; Ort, D.R.; Placella, S.A.P.; Rogers, A.; Smith, M.D.; Sudderth, E.A.; Weston, D.J.; Wullschleger, S.D.; Yuan, S.

    2009-11-01

    The use of genomic techniques to address ecological questions is emerging as the field of genomic ecology. Experimentation under environmentally realistic conditions to investigate the molecular response of plants to meaningful changes in growth conditions and ecological interactions is the defining feature of genomic ecology. Since the impact of global change factors on plant performance are mediated by direct effects at the molecular, biochemical and physiological scales, gene expression analysis promises important advances in understanding factors that have previously been consigned to the 'black box' of unknown mechanism. Various tools and approaches are available for assessing gene expression in model and non-model species as part of global change biology studies. Each approach has its own unique advantages and constraints. A first generation of genomic ecology studies in managed ecosystems and mesocosms have provided a testbed for the approach and have begun to reveal how the experimental design and data analysis of gene expression studies can be tailored for use in an ecological context.

  8. Study on the applicability of instrumental measures for black-box evaluation of static feedback control in hearing aids.

    Science.gov (United States)

    Madhu, N; Wouters, J; Spriet, A; Bisitz, T; Hohmann, V; Moonen, M

    2011-08-01

    Presented is a report on black-box evaluation of feedback control systems for commercial hearing aids. The aim of the study is to examine the ability of existing instrumental measures to quantify the performance of the feedback control system in black-box settings and on realistic signals, when more than one element of the signal processing chain may be active (compression, noise suppression, microphone directionality, etc.). The evaluation is carried out on 6 different hearing aids and for 10 measures. Thereby it is possible to see which measure is best suited to measuring which specific characteristic of the feedback control system, and serves as a beginning for conducting perceptual tests. The study uses static (but variable) feedback paths and is based on signals recorded from the in-ear microphone of an artificial head, on which the hearing instruments are mounted.

  9. Opening the black box of collaborative writing: experiences from a teamwork-based course in industrial management

    Directory of Open Access Journals (Sweden)

    Lars Uppvall

    Full Text Available Abstract In this paper we discuss the introduction of collaborative writing (CW tools in a course designed with learning activities based on problem-based learning (PBL, authentic case methodology, and teamwork. We argue that CW is a vital, but poorly understood, part of teamwork, and a black-box activity. Our ambition is to open the black box of CW and discuss how CW concepts can enrich teamwork activities. We build on our students’ reflections on challenges linked to CW in a teamwork setting. In total the data consisted of 77 individual reflection papers, which were analyzed using constructs from prior literature on CW. Our results show that our students actively used CW tools and strategies and that CW had a large impact—and, in fact, enhanced teamwork management. The CW tools also helped in creating sustainable teamwork in the sense that they enhanced the three criterions of team performance: productivity, cohesion, and learning.

  10. Generic Black-Box End-to-End Attack Against State of the Art API Call Based Malware Classifiers

    OpenAIRE

    Rosenberg, Ishai; Shabtai, Asaf; Rokach, Lior; Elovici, Yuval

    2017-01-01

    In this paper, we present a black-box attack against API call based machine learning malware classifiers, focusing on generating adversarial sequences combining API calls and static features (e.g., printable strings) that will be misclassified by the classifier without affecting the malware functionality. We show that this attack is effective against many classifiers due to the transferability principle between RNN variants, feed forward DNNs, and traditional machine learning classifiers such...

  11. FDA drug prescribing warnings: is the black box half empty or half full?

    Science.gov (United States)

    Wagner, Anita K; Chan, K Arnold; Dashevsky, Inna; Raebel, Marsha A; Andrade, Susan E; Lafata, Jennifer Elston; Davis, Robert L; Gurwitz, Jerry H; Soumerai, Stephen B; Platt, Richard

    2006-06-01

    Black box warnings (BBWs) are the Food and Drug Administration's (FDA) strongest labeling requirements for high-risk medicines. It is unknown how frequently physicians prescribe BBW drugs and whether they do so in compliance with the warnings. The purpose of the present study was to assess the frequency of use of BBW medications in ambulatory care and prescribing compliance with BBW recommendations. This retrospective study used automated claims data of 929 958 enrollees in 10 geographically diverse health plans in the United States to estimate frequency of use in ambulatory care of 216 BBW drugs/drug groups between 1/1/99 and 31/6/01. We assessed dispensing compliance with the BBW requirements for selected drugs. During a 30-month period, more than 40% of enrollees received at least one medication that carried a BBW that could potentially apply to them. We found few instances of prescribing during pregnancy of BBW drugs absolutely contra-indicated in pregnancy. There was almost no co-prescribing of contra-indicated drugs with the two QT-interval-prolonging BBW drugs evaluated. Most non-compliance occurred with recommendations for baseline laboratory monitoring (49.6% of all therapy initiations that should have been accompanied by baseline laboratory monitoring were not). Many individuals receive drugs considered to carry the potential for serious risk. For some of these drugs, use is largely consistent with their BBW, while for others it is not. Since it will not be possible to avoid certain drug- associated risks, it will be important to develop effective methods to use BBWs and other methods to minimize risks.

  12. Implementing Black Box Warnings (BBWs) in Health Information Systems: An Organizing Taxonomy Identifying Opportunities and Challenges.

    Science.gov (United States)

    Ikezuagu, M; Yang, E; Daghstani, A; Kaelber, D C

    2012-01-01

    To develop a practical approach for implementing clinical decision support (CDS) for medication black box warnings (BBWs) into health information systems (HIS). We reviewed all existing medication BBWs and organized them into a taxonomy that identifies opportunities and challenges for implementing CDS for BBWs into HIS. Of the over 400 BBWs that currently exist, they can be organized into 4 categories with 9 sub-categories based on the types of information contained in the BBWs, who should be notified, and potential actions to that could be taken by the person receiving the BBW. Informatics oriented categories and sub-categories of BBWs include - interactions (13%) (drug-drug (4%) and drug-diagnosis (9%)), testing (21%) (baseline (9%) and on-going (12%)), notifications (29%) (drug prescribers (7%), drug dispensers (2%), drug administrators (9%), patients (10%), and third parties (1%)), and non-actionable (37%). This categorization helps identify BBWs for which CDS can be easily implemented into HIS today (such as drug-drug interaction BBWs), those that cannot be easily implemented into HIS today (such as non-actionable BBWs), and those where advanced and/or integrated HIS need to be in place to implement CDS for BBWs (such a drug dispensers BBWs). HIS have the potential to improve patient safety by implementing CDS for BBWs. A key to building CDS for BBWs into HIS is developing a taxonomy to serve as an organizing roadmap for implementation. The informatics oriented BBWs taxonomy presented here identified types of BBWs in which CDS can be implemented easily into HIS currently (a minority of the BBWs) and those types of BBWs where CDS cannot be easily implemented today (a majority of BBWs).

  13. Simulation-based training for thoracoscopic lobectomy: a randomized controlled trial: virtual-reality versus black-box simulation.

    Science.gov (United States)

    Jensen, Katrine; Ringsted, Charlotte; Hansen, Henrik Jessen; Petersen, René Horsleben; Konge, Lars

    2014-06-01

    Video-assisted thoracic surgery is gradually replacing conventional open thoracotomy as the method of choice for the treatment of early-stage non-small cell lung cancers, and thoracic surgical trainees must learn and master this technique. Simulation-based training could help trainees overcome the first part of the learning curve, but no virtual-reality simulators for thoracoscopy are commercially available. This study aimed to investigate whether training on a laparoscopic simulator enables trainees to perform a thoracoscopic lobectomy. Twenty-eight surgical residents were randomized to either virtual-reality training on a nephrectomy module or traditional black-box simulator training. After a retention period they performed a thoracoscopic lobectomy on a porcine model and their performance was scored using a previously validated assessment tool. The groups did not differ in age or gender. All participants were able to complete the lobectomy. The performance of the black-box group was significantly faster during the test scenario than the virtual-reality group: 26.6 min (SD 6.7 min) versus 32.7 min (SD 7.5 min). No difference existed between the two groups when comparing bleeding and anatomical and non-anatomical errors. Simulation-based training and targeted instructions enabled the trainees to perform a simulated thoracoscopic lobectomy. Traditional black-box training was more effective than virtual-reality laparoscopy training. Thus, a dedicated simulator for thoracoscopy should be available before establishing systematic virtual-reality training programs for trainees in thoracic surgery.

  14. Paediatric Patient Safety and the Need for Aviation Black Box Thinking to Learn From and Prevent Medication Errors.

    Science.gov (United States)

    Huynh, Chi; Wong, Ian C K; Correa-West, Jo; Terry, David; McCarthy, Suzanne

    2017-04-01

    Since the publication of To Err Is Human: Building a Safer Health System in 1999, there has been much research conducted into the epidemiology, nature and causes of medication errors in children, from prescribing and supply to administration. It is reassuring to see growing evidence of improving medication safety in children; however, based on media reports, it can be seen that serious and fatal medication errors still occur. This critical opinion article examines the problem of medication errors in children and provides recommendations for research, training of healthcare professionals and a culture shift towards dealing with medication errors. There are three factors that we need to consider to unravel what is missing and why fatal medication errors still occur. (1) Who is involved and affected by the medication error? (2) What factors hinder staff and organisations from learning from mistakes? Does the fear of litigation and criminal charges deter healthcare professionals from voluntarily reporting medication errors? (3) What are the educational needs required to prevent medication errors? It is important to educate future healthcare professionals about medication errors and human factors to prevent these from happening. Further research is required to apply aviation's 'black box' principles in healthcare to record and learn from near misses and errors to prevent future events. There is an urgent need for the black box investigations to be published and made public for the benefit of other organisations that may have similar potential risks for adverse events. International sharing of investigations and learning is also needed.

  15. Using Minitab-Box Benken Software to Optimize the Induction Heating Process

    Directory of Open Access Journals (Sweden)

    LEUCA Teodor

    2014-05-01

    Full Text Available This paper presents aspects on finding some optimal dependence between the inductor input parameters (frequency, air gap and current density and its output parameters (spacing, power density, heating time. It also shows the results of coupling the numerical modeling of the inductive heating process, using Flux 2D, with a numerical model of optimization, using Minitab software.

  16. Embedded Information Systems Technology Support (EISTS). Task Order 0006: Vulnerability Path Analysis and Demonstration (VPAD). Volume 2 - White Box Definitions of Software Fault Patterns

    Science.gov (United States)

    2011-12-01

    SFP # Software Fault Clusters Primary Secondary # of CWEs Primary CWE Totals Pattern...Condition Available? White- Box CWE SFP # Software Fault Clusters Primary Secondary # of CWEs Primary CWE Totals Pattern & Condition...Available? White- Box CWE SFP # 632 310 36 o o o o o o o o o o o o o o o o o o o o o o any o o o o o o o o o o o o o o o o o o o o o o o

  17. Opening the black box of eHealth: Collecting, analyzing, and interpreting log data

    NARCIS (Netherlands)

    Sieverink, Floor; Kelders, Saskia Marion; Poel, Mannes; van Gemert-Pijnen, Julia E.W.C.

    Background: In eHealth research, limited insights have been obtained on process outcomes or how the use of technology has contributed to the users’ ability to have a healthier life, improved wellbeing, or activate new attitudes in their daily tasks. As a result, eHealth is often perceived as a black

  18. Unpainting the black box : exploring mechanisms and practices of start-up incubators

    NARCIS (Netherlands)

    van Weele, M.A.

    2016-01-01

    Although incubators have become one of the most prominent instruments to stimulate the emergence and growth of start-ups, questions are being raised about their effectiveness. One major obstacle to evaluate the effectiveness of incubators is that the incubator remains a ‘black box’: the extant

  19. How is the Customer Contributor and Interpreter of Value? : Opening the Black Box of the linkages between value creation and experience

    NARCIS (Netherlands)

    Sahhar, Y.; Loohuis, R.P.A.

    2017-01-01

    Purpose – The purpose of this paper is to open up the black box of the link between value experience and value creation through a phenomenological lens. We aim to explore distinct linkages between these two concepts and attempt to investigate what constitutes these linkages and how they relate to

  20. Open the "Black Box" Creativity and Innovation: A Study of Activities in R&D Departments. Some Prospects for Engineering Education

    Science.gov (United States)

    Millet, Charlyne; Oget, David; Cavallucci, Denis

    2017-01-01

    Innovation is a key component to the success and longevity of companies. Our research opens the "black box" of creativity and innovation in R&D teams. We argue that understanding the nature of R&D projects in terms of creativity/innovation, efficiency/inefficiency, is important for designing education policies and improving…

  1. Soft sensors with white- and black-box approaches for a wastewater treatment process

    Directory of Open Access Journals (Sweden)

    D. Zyngier

    2000-12-01

    Full Text Available The increasing degradation of water resources makes it necessary to monitor and control process variables that may disturb the environment, but which may be very difficult to measure directly, either because there are no physical sensors available, or because these are too expensive. In this work, two soft sensors are proposed for monitoring concentrations of nitrate (NO and ammonium (NH ions, and of carbonaceous matter (CM during nitrification of wastewater. One of them is based on reintegration of a process model to estimate NO and NH and on a feedforward neural network to estimate CM. The other estimator is based on Stacked Neural Networks (SNN, an approach that provides the predictor with robustness. After simulation, both soft sensors were implemented in an experimental unit using FIX MMI (Intellution, Inc automation software as an interface between the process and MATLAB 5.1 (The Mathworks Inc. software.

  2. Beyond the black box: drug- and device-associated hypersensitivity events

    Directory of Open Access Journals (Sweden)

    Charles L Bennett

    2010-02-01

    Full Text Available Charles L Bennett1,2, Olatokunbo S Adegboro2, Elizabeth A Calhoun2, Dennis Raisch3,41Jesse Brown VA Medical Center, Chicago, IL, USA; 2University of Illinois School of Public Health, Chicago, IL, USA; 3University of New Mexico College of Pharmacy, Albuquerque, NM, USA; 4Veteran Affairs Cooperative Studies Program, Clinical Research Pharmacy, Albuquerque, NM, USABackground: Drug- and device-associated hypersensitivity reactions are serious toxicities that can result in respiratory failure or acute cardiac ischemic events, or even severe hypersensitivity syndromes such as Stevens–Johnson syndrome. These toxicities are usually poorly described in the “black box” warnings section of the product labels.Methods: Adverse event reports contained in databases maintained by the Project on Medical Research on Adverse Drug Events and Reports (Med-RADAR, product labels, safety advisories disseminated by pharmaceutical manufacturers, the Food and Drug Administration (FDA, and the Centers for Disease Control and Prevention (CDC were reviewed.Results: Adverse event reports identified three health care workers who developed nevirapineassociated Stevens–Johnson syndrome following occupational exposure to HIV-infected blood or blood products; four persons with localized hypersensitivity and fatal cardiac events associated with rapamycin- or paclitaxel-coated coronary artery stent placements; and six persons with breast cancer who developed severe or fatal anaphylaxis after receiving adjuvant chemotherapy with Cremophor-EL containing paclitaxel. Safety advisories from the FDA, CDC, and the relevant pharmaceutical manufacturers were ambiguous in their description in “black box” warning sections of package inserts describing these serious and potentially fatal toxicities. Conclusion: Improvements are needed in pharmacovigilance and subsequent dissemination of safety advisories for drug/device-associated hypersensitivity reactions.Keywords: adverse events

  3. Opening the black box: lessons learned from an interdisciplinary inquiry into the learning-based contents of brain injury rehabilitation.

    Science.gov (United States)

    Hart, Tessa; Ferraro, Mary; Myers, Robin; Ellis, Colin A

    2014-01-01

    This article describes challenges encountered and lessons learned in an effort to explore the black box of rehabilitation. A multidisciplinary team created detailed, mutually exclusive operational definitions for the contents of learning-based treatments administered in a brain injury unit. The function and activity levels of the International Classification of Functioning, Disability and Health were used to organize content definitions, which included examples of therapy activities and therapist behaviors, such as cues. Pairs of trained coders independently identified defined learning episodes within each minute of 128 videotaped physical, occupational, or speech therapy sessions. Interrater agreement was generally acceptable and did not vary by discipline of session, discipline of coder, or whether coders were clinically trained. Disagreements typically involved the threshold for determining that a learning episode had occurred, or deciding between function and activity codes where the surface content of the sessions were similar. The focus on individual therapy sessions allowed for rich qualitative detail, but a less granular analysis will be necessary for comprehensive efforts to characterize the contents of therapy. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  4. Impact of FDA Black Box Warning on Psychotropic Drug Use in Noninstitutionalized Elderly Patients Diagnosed With Dementia: A Retrospective Study.

    Science.gov (United States)

    Singh, Rakesh R; Nayak, Rajesh

    2016-10-01

    The study seeks to investigate the impact of Food and Drug Administration's black box warning (BBW) on the use of atypical antipsychotics (AAP) and nonantipsychotic psychotropic alternatives in noninstitutionalized elderly population diagnosed with dementia. The Medical Expenditure Panel Survey (2004 through 2007) was utilized as the data source. Medication use in elderly patients (≥65 years) was defined as taking at least 1 medication for dementia. We performed a statistical comparison of prewarning (2004-2005) and postwarning (2006-2007) periods with respect to AAP and nonantipsychotic psychotropic use to examine the impact of labeling changes. A bivariate analysis did not yield statistically significant change in either the AAP or nonantipsychotic psychotropic use, pre- versus postwarning. However, multivariate logistic-regression analyses revealed greater odds for antidementia (odds ratio [OR] = 1.976, P = .0195) and benzodiazepine (OR = 3.046, P = .0227) medication use in postwarning period compared to the prewarning period. The regulatory warnings and labeling changes regarding off-label use of AAPs in dementia treatment showed minimal impact on their actual use in noninstitutionalized populations. A corresponding increase in the use of nonantipsychotic psychotropics explains that BBW might have resulted in a compensatory shift in favor of benzodiazepines and antidementia medications. Additional research should be conducted to examine the long-term impact of BBW on antipsychotic prescribing changes. © The Author(s) 2015.

  5. White Anglo-Saxon hopes and black Americans' Atlantic dreams: Jack Johnson and the British boxing colour bar.

    Science.gov (United States)

    Runstedtler, Theresa

    2010-01-01

    This article examines the controversy surrounding Jack Johnson's proposed world heavyweight title fight against the British champion Bombardier Billy Wells in London (1911). In juxtaposing African Americans' often glowing discussions of European tolerance with the actual white resistance the black champion faced in Britain, including the Home Office's eventual prohibition of the match, the article explores the period's transnational discourses of race and citizenship. Indeed, as white sportsmen on both sides of the Atlantic joined together in their search for a "White Hope" to unseat Johnson, the boxing ring became an important cultural arena for interracial debates over the political and social divisions between white citizens and nonwhite subjects. Although African Americans had high hopes for their hero's European sojourn, the British backlash against the Johnson-Wells match underscored the fact that their local experiences of racial oppression were just one facet of a much broader global problem. At the same time, the proposed prizefight also made the specter of interracial conflict in the colonies all the more tangible in the British capital, provoking public discussions about the merits of U.S. racial segregation, along with the need for white Anglo-Saxon solidarity around the world. Thus, this article not only exposes the underlying connections between American Jim Crow and the racialized fault lines of British imperialism, but it also traces the "tense and tender ties" linking U.S. and African American history with the new imperial history and postcolonial studies.

  6. Injury severity analysis in taxi-pedestrian crashes: An application of reconstructed crash data using a vehicle black box.

    Science.gov (United States)

    Chung, Younshik

    2018-02-01

    In-vehicle recording devices have enabled recent changes in methodological paradigms for traffic safety research. Such devices include event data recorders (EDRs), vehicle black boxes (VBBs), and various sensors used in naturalistic driving studies (NDSs). These technologies may help improve the validity of models used to assess impacts on traffic safety. The objective of this study is to analyze the injury severity in taxi-pedestrian crashes using the accurate crash data from VBBs, such as the time-to-collision (TTC), speed, angle, and region of the crash. VBB data from a two-year period (2010-2011) were collected from taxis operating in Incheon, South Korea. An ordered probit model was then applied to analyze the injury severity in crashes. Five variables were found to have a greater effect on injury severity: crash speed, crashes in no-median sections, crashes where the secondary impact object of pedestrians was the crash vehicle, crashes where the third impact object of pedestrians was another moving vehicle, and crashes where the third impact region of pedestrians was their head. However, injuries were less severe in crashes where the first impact region on the pedestrian was their leg, crashes with the car moving in a straight line, and crashes involving junior high school students. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Canada’s Equalization Formula: Peering Inside the Black Box.. and Beyond

    Directory of Open Access Journals (Sweden)

    Jim Feehan

    2014-09-01

    category in the formula that calculates equalization. They should go in the business income tax category, just as do the earnings of other commercial Crown corporations and taxes paid by private businesses. Going beyond the formula, it is time to re-consider the practice of exempting commercial Crown corporations from corporate income taxation. A more fundamental and long-recognized problem is the incentive for provinces receiving equalization payments to underprice the water-rental rates they charge for hydro production. Lowering water-rental rates has the effect of reducing provincial hydro revenues, which can entitle those provinces to larger equalization payments, while benefitting residents with cheaper hydro rates. Looked at empirically, “have-not” provinces do charge lower average rates for hydro than do “have” provinces, lending credence to the criticism that non-recipient provinces subsidize cheaper energy for residents of recipient provinces. The increased development of competitive North American wholesale electricity markets in recent decades has made it more feasible to assess what a fair market price for water-rental rates could be. Updating the equalization formula to consider not water-rental revenue, but water-rental fiscal capacity, should be the highest priority of all in reforming Canada’s equalization formula to align it more closely to the principles behind its creation. It is also time to include municipal government revenues from user fees in the formula. Those revenues are significant and it makes little sense to exclude them when municipal property tax revenues are included. Equalization is not out of control but reform is needed. Action on these fronts should be the priorities. These insidethe-box issues should be resolved before going beyond and considering the more complex task of extending the formula to account for provincial governments’ different expenditure needs and costs.

  8. Breaking Open the Black Box: Isolating the Most Potent Features of a Web and Mobile Phone-Based Intervention for Depression, Anxiety, and Stress

    OpenAIRE

    Whitton, Alexis E; Proudfoot, Judith; Clarke, Janine; Birch, Mary-Rose; Parker, Gordon; Manicavasagar, Vijaya; Hadzi-Pavlovic, Dusan

    2015-01-01

    Background Internet-delivered mental health (eMental Health) interventions produce treatment effects similar to those observed in face-to-face treatment. However, there is a large degree of variation in treatment effects observed from program to program, and eMental Health interventions remain somewhat of a black box in terms of the mechanisms by which they exert their therapeutic benefit. Trials of eMental Health interventions typically use large sample sizes and therefore provide an ideal c...

  9. Unpacking the Black Box: Applications and Considerations for Using GPS Devices in Sport.

    Science.gov (United States)

    Malone, James J; Lovell, Ric; Varley, Matthew C; Coutts, Aaron J

    2017-04-01

    Athlete-tracking devices that include global positioning system (GPS) and microelectrical mechanical system (MEMS) components are now commonplace in sport research and practice. These devices provide large amounts of data that are used to inform decision making on athlete training and performance. However, the data obtained from these devices are often provided without clear explanation of how these metrics are obtained. At present, there is no clear consensus regarding how these data should be handled and reported in a sport context. Therefore, the aim of this review was to examine the factors that affect the data produced by these athlete-tracking devices and to provide guidelines for collecting, processing, and reporting of data. Many factors including device sampling rate, positioning and fitting of devices, satellite signal, and data-filtering methods can affect the measures obtained from GPS and MEMS devices. Therefore researchers are encouraged to report device brand/model, sampling frequency, number of satellites, horizontal dilution of precision, and software/firmware versions in any published research. In addition, details of inclusion/exclusion criteria for data obtained from these devices are also recommended. Considerations for the application of speed zones to evaluate the magnitude and distribution of different locomotor activities recorded by GPS are also presented, alongside recommendations for both industry practice and future research directions. Through a standard approach to data collection and procedure reporting, researchers and practitioners will be able to make more confident comparisons from their data, which will improve the understanding and impact these devices can have on athlete performance.

  10. How accurate is accident data in road safety research? An application of vehicle black box data regarding pedestrian-to-taxi accidents in Korea.

    Science.gov (United States)

    Chung, Younshik; Chang, IlJoon

    2015-11-01

    Recently, the introduction of vehicle black box systems or in-vehicle video event data recorders enables the driver to use the system to collect more accurate crash information such as location, time, and situation at the pre-crash and crash moment, which can be analyzed to find the crash causal factors more accurately. This study presents the vehicle black box system in brief and its application status in Korea. Based on the crash data obtained from the vehicle black box system, this study analyzes the accuracy of the crash data collected from existing road crash data recording method, which has been recorded by police officers based on accident parties' statements or eyewitness's account. The analysis results show that the crash data observed by the existing method have an average of 84.48m of spatial difference and standard deviation of 157.75m as well as average 29.05min of temporal error and standard deviation of 19.24min. Additionally, the average and standard deviation of crash speed errors were found to be 9.03km/h and 7.21km/h, respectively. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Opening the black box of transfer systems in public sector health services in a Western state in India.

    Science.gov (United States)

    Purohit, Bhaskar; Martineau, Tim; Sheikh, Kabir

    2016-08-22

    Limited research on Posting and Transfer (P&T) policies and systems in the public sector health services and the reluctance for an open debate on the issue makes P&T as a black box. Limited research on P&T in India suggests that P&T policies and systems are either non-existent, weak, poorly implemented or characterized by corruption. Hence the current study aimed at opening the "black box" of P&T systems in public sector health services in India by assessing the implementation gaps between P&T policies and their actual implementation. This was a qualitative study carried out in Department of Health, in a Western State in India. To understand the extant P&T policies, a systems map was first developed with the help of document review and Key Informant (KI) Interviews. Next systems audit was carried out to assess the actual implementation of transfer policies by interviewing Medical Officers (MOs), the group mainly affected by the P&T policies. Job histories were constructed from the interviews to understand transfer processes like frequencies of transfers and to assess if transfer rules were adhered. The analysis is based on a synthesis of document review, 19 in-depth interviews with MOs working with state health department and five in-depth interviews with Key Informants (KIs). Framework analysis approach was used to analyze data using NVIVO. The state has a generic transfer guideline applicable to all government officers but there is no specific transfer policy or guideline for government health personnel. The generic transfer guidelines are weakly implemented indicating a significant gap between policy and actual implementation. The formal transfer guidelines are undermined by a parallel system in which desirable posts are attained, retained or sometimes given up by the use of political connections and money. MOs' experiences of transfers were marked by perceptions of unfairness and irregularities reflected through interviews as well as the job histories. The

  12. The First Derivative of an Exponential Function with the "White Box/Black Box" Didactical Principle and Observations with GeoGebra

    Science.gov (United States)

    Budinski, Natalija; Subramaniam, Stephanie

    2013-01-01

    This paper shows how GeoGebra--a dynamic mathematics software--can be used to experiment, visualize and connect various concepts such as function, first derivative, slope, and tangent line. Students were given an assignment to determine the first derivative of the exponential function that they solved while experimenting with GeoGebra. GeoGebra…

  13. Opening the black-box of person-centred care: An arts-informed narrative inquiry into mental health education and practice.

    Science.gov (United States)

    Schwind, Jasna K; Lindsay, Gail M; Coffey, Sue; Morrison, Debbie; Mildon, Barb

    2014-08-01

    Nursing education has a history of encouraging students to know their patients and to negotiate the in-between of art/science, person/profession, and intuition/evidence. Nurse-teachers know that students may abandon some values and practices when they encounter practice environments that are complex and have competing agendas. We are concerned that nursing knowledge is black-boxed, invisible and taken-for-granted, in healthcare settings. Our research explores how nursing students and nurses are constructing and enacting person-centred care in mental health education and practice. We want to understand the nursing standpoint on this significant ontological issue and to make nursing knowledge construction and utilization visible; illuminating how person-centred theory emerges from practice. The process involved four 3-hour group meetings and an individual follow-up telephone conversation. Students and nurses met at a tertiary-care mental health organization. Fourteen nurses (Registered Nurses and Registered Practical Nurses) and nursing students (Bachelor of Science in Nursing and Practical Nursing) participated in our inquiry. We used arts-informed narrative inquiry to explore experience through the arts such as metaphor, collage, poems, letters, and group conversations. The black-box is opened as the inquiry reveals how nursing knowledge is constructed, assumptions are challenged and new practices emerge. Our research is significant for education and for practice and is transferable to other populations and settings. Nurses are affirmed in person-centred values and practices that include partnership with those in their care, role modeling for colleagues and mentoring students and new nurses. Students participate in transferring their learning from school to practice, in the company of experienced colleagues; together they open the black-box to show how nurses conceptualize and enact person-centred care. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. A Model for Assessing the Liability of Seemingly Correct Software

    Science.gov (United States)

    Voas, Jeffrey M.; Voas, Larry K.; Miller, Keith W.

    1991-01-01

    Current research on software reliability does not lend itself to quantitatively assessing the risk posed by a piece of life-critical software. Black-box software reliability models are too general and make too many assumptions to be applied confidently to assessing the risk of life-critical software. We present a model for assessing the risk caused by a piece of software; this model combines software testing results and Hamlet's probable correctness model. We show how this model can assess software risk for those who insure against a loss that can occur if life-critical software fails.

  15. Prediction of black box warning by mining patterns of Convergent Focus Shift in clinical trial study populations using linked public data.

    Science.gov (United States)

    Ma, Handong; Weng, Chunhua

    2016-04-01

    To link public data resources for predicting post-marketing drug safety label changes by analyzing the Convergent Focus Shift patterns among drug testing trials. We identified 256 top-selling prescription drugs between 2003 and 2013 and divided them into 83 BBW drugs (drugs with at least one black box warning label) and 173 ROBUST drugs (drugs without any black box warning label) based on their FDA black box warning (BBW) records. We retrieved 7499 clinical trials that each had at least one of these drugs for intervention from the ClinicalTrials.gov. We stratified all the trials by pre-marketing or post-marketing status, study phase, and study start date. For each trial, we retrieved drug and disease concepts from clinical trial summaries to model its study population using medParser and SNOMED-CT. Convergent Focus Shift (CFS) pattern was calculated and used to assess the temporal changes in study populations from pre-marketing to post-marketing trials for each drug. Then we selected 68 candidate drugs, 18 with BBW warning and 50 without, that each had at least nine pre-marketing trials and nine post-marketing trials for predictive modeling. A random forest predictive model was developed to predict BBW acquisition incidents based on CFS patterns among these drugs. Pre- and post-marketing trials of BBW and ROBUST drugs were compared to look for their differences in CFS patterns. Among the 18 BBW drugs, we consistently observed that the post-marketing trials focused more on recruiting patients with medical conditions previously unconsidered in the pre-marketing trials. In contrast, among the 50 ROBUST drugs, the post-marketing trials involved a variety of medications for testing their associations with target intervention(s). We found it feasible to predict BBW acquisitions using different CFS patterns between the two groups of drugs. Our random forest predictor achieved an AUC of 0.77. We also demonstrated the feasibility of the predictor for identifying long

  16. Analyser Framework to Verify Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2009-01-01

    Full Text Available Today, it is important for software companies to build software systems in a short time-interval, to reduce costs and to have a good market position. Therefore well organized and systematic development approaches are required. Reusing software components, which are well tested, can be a good solution to develop software applications in effective manner. The reuse of software components is less expensive and less time consuming than a development from scratch. But it is dangerous to think that software components can be match together without any problems. Software components itself are well tested, of course, but even if they composed together problems occur. Most problems are based on interaction respectively communication. Avoiding such errors a framework has to be developed for analysing software components. That framework determines the compatibility of corresponding software components. The promising approach discussed here, presents a novel technique for analysing software components by applying an Abstract Syntax Language Tree (ASLT. A supportive environment will be designed that checks the compatibility of black-box software components. This article is concerned to the question how can be coupled software components verified by using an analyzer framework and determines the usage of the ASLT. Black-box Software Components and Abstract Syntax Language Tree are the basis for developing the proposed framework and are discussed here to provide the background knowledge. The practical implementation of this framework is discussed and shows the result by using a test environment.

  17. PENGEMBANGAN DAN PERANCANGAN TEMPAT TIDUR BAYI (BABY BOX YANG ERGONOMIS MENGGUNAKAN SOFTWARE AUTOCAD DENGA PENDEKATAN DATA ANTROPOMETRI

    Directory of Open Access Journals (Sweden)

    Agung Kristanto

    2011-07-01

    Full Text Available Dengan semakin majunya sistem informasi diluar maupun didalamnegeri, Kini masyarakat lebih memperhatikan atau tertarik pada produk-produk yang dihasilkan harus lebih mempunyai nilai ringkas atau flexibledan tentunya sesuai dengan harga dari produk tersebut, Hal ini menjadisebuah acuan bagi pengembang inovasi produk yang mementingkankeinginan masyarakat untuk mendapatkan kekuatan dari kalangan konsumen,Dengan mempertimbangkan usulan dari para orang tua maka penulismencoba menawarkan prototype tempat tidur balita yang sesuai dengandimensi antropometri tubuh bayi di Indonesia. Dengan maksud tempat tidurbayi tersebut mampu memberikan kenyamanan dan keamanan bagi bayi,khususnya kepuasan bagi para orang tua dalam mengasuh atau memfasilitasianaknya. Metodologi penelitian dilakukan dengan penggalian data dariresponden menggunakan metode Quality Funcion Deployment (QFD untukmengetahui keinginan dari konsumen, serta data antropometri untukmengetahui persentil dari ukuran yang diperlukan untuk merancang TempatTidur Bayi (Baby Box yang sesuai dengan dimensi tubuh bayi di Indonesia.Hasil penelitian ini dapat diketahui atribut-atribut tempat tidur bayi yangsesuai dengan keinginan pelanggan meliputi : Tempat tidur mampu menahanberat dan gerakan bayi, Dilengkapi dengan kain tile pelindung dari gigitannyamuk, Adanya rak tempat untuk menyimpan pakaian bayi, Warna tempattidur yang cerah, Adanya kantong tas sehingga mudah dibawa. Ukurantempat tidur bayi dikembangkan berdasarkan penerapan data antropometridengan menggunakan persentil 5-th dan 95-th sehingga diperoleh ukurantinggi tempat tidur bayi adalah 80cm, panjang 110 cm, dan lebar 80cm.

  18. PENGEMBANGAN DAN PERANCANGAN TEMPAT TIDUR BAYI (BABY BOX YANG ERGONOMIS MENGGUNAKAN SOFTWARE AUTOCAD DENGA PENDEKATAN DATA ANTROPOMETRI

    Directory of Open Access Journals (Sweden)

    Agung Kristanto

    2011-01-01

    Full Text Available Dengan semakin majunya sistem informasi diluar maupun didalamnegeri, Kini masyarakat lebih memperhatikan atau tertarik pada produk-produk yang dihasilkan harus lebih mempunyai nilai ringkas atau flexibledan tentunya sesuai dengan harga dari produk tersebut, Hal ini menjadisebuah acuan bagi pengembang inovasi produk yang mementingkankeinginan masyarakat untuk mendapatkan kekuatan dari kalangan konsumen,Dengan mempertimbangkan usulan dari para orang tua maka penulismencoba menawarkan prototype tempat tidur balita yang sesuai dengandimensi antropometri tubuh bayi di Indonesia. Dengan maksud tempat tidurbayi tersebut mampu memberikan kenyamanan dan keamanan bagi bayi,khususnya kepuasan bagi para orang tua dalam mengasuh atau memfasilitasianaknya. Metodologi penelitian dilakukan dengan penggalian data dariresponden menggunakan metode Quality Funcion Deployment (QFD untukmengetahui keinginan dari konsumen, serta data antropometri untukmengetahui persentil dari ukuran yang diperlukan untuk merancang TempatTidur Bayi (Baby Box yang sesuai dengan dimensi tubuh bayi di Indonesia.Hasil penelitian ini dapat diketahui atribut-atribut tempat tidur bayi yangsesuai dengan keinginan pelanggan meliputi : Tempat tidur mampu menahanberat dan gerakan bayi, Dilengkapi dengan kain tile pelindung dari gigitannyamuk, Adanya rak tempat untuk menyimpan pakaian bayi, Warna tempattidur yang cerah, Adanya kantong tas sehingga mudah dibawa. Ukurantempat tidur bayi dikembangkan berdasarkan penerapan data antropometridengan menggunakan persentil 5-th dan 95-th sehingga diperoleh ukurantinggi tempat tidur bayi adalah 80cm, panjang 110 cm, dan lebar 80cm. 

  19. Exploring the use of grounded theory as a methodological approach to examine the 'black box' of network leadership in the national quality forum.

    Science.gov (United States)

    Hoflund, A Bryce

    2013-01-01

    This paper describes how grounded theory was used to investigate the "black box" of network leadership in the creation of the National Quality Forum. Scholars are beginning to recognize the importance of network organizations and are in the embryonic stages of collecting and analyzing data about network leadership processes. Grounded theory, with its focus on deriving theory from empirical data, offers researchers a distinctive way of studying little-known phenomena and is therefore well suited to exploring network leadership processes. Specifically, this paper provides an overview of grounded theory, a discussion of the appropriateness of grounded theory to investigating network phenomena, a description of how the research was conducted, and a discussion of the limitations and lessons learned from using this approach.

  20. Sequential Convex Programming for Power Set-point Optimization in a Wind Farm using Black-box Models, Simple Turbine Interactions, and Integer Variables

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Jørgensen, John Bagterp

    2012-01-01

    We consider the optimization of power set-points to a large number of wind turbines arranged within close vicinity of each other in a wind farm. The goal is to maximize the total electric power extracted from the wind, taking the wake effects that couple the individual turbines in the farm...... describing the turbulent wind fields’ propagation through the farm are included in a highly detailed black-box model, numerical results for any given values of the parameter sets can easily be evaluated. However, analytic expressions for model representation in the optimization algorithms might be hard...... convex approximation and compare with mixed-integer optimization tools. We demonstrate the method on a verified model and for various sizes and configurations of the wind farm. For all tested scenarios we observe a distribution of the power set-points which is at least as good as, and in many cases...

  1. Cheap but accurate calculation of chemical reaction rate constants from ab initio data, via system-specific, black-box force fields.

    Science.gov (United States)

    Steffen, Julien; Hartke, Bernd

    2017-10-28

    Building on the recently published quantum-mechanically derived force field (QMDFF) and its empirical valence bond extension, EVB-QMDFF, it is now possible to generate a reliable potential energy surface for any given elementary reaction step in an essentially black box manner. This requires a limited and pre-defined set of reference data near the reaction path and generates an accurate approximation of the reference potential energy surface, on and off the reaction path. This intermediate representation can be used to generate reaction rate data, with far better accuracy and reliability than with traditional approaches based on transition state theory (TST) or variational extensions thereof (VTST), even if those include sophisticated tunneling corrections. However, the additional expense at the reference level remains very modest. We demonstrate all this for three arbitrarily chosen example reactions.

  2. PENGEMBANGAN DAN PERANCANGAN TEMPAT TIDUR BAYI (BABY BOX YANG ERGONOMIS MENGGUNAKAN SOFTWARE AUTOCAD DENGA PENDEKATAN DATA ANTROPOMETRI

    Directory of Open Access Journals (Sweden)

    Agung Kristanto

    2013-04-01

    Full Text Available Dengan semakin majunya sistem informasi diluar maupun didalam negeri, Kini masyarakat lebih memperhatikan atau tertarik pada produk-produk yang dihasilkan harus lebih mempunyai nilai ringkas atau  flexibledan tentunya sesuai dengan harga dari produk tersebut, Hal ini  menjadi sebuah acuan bagi pengembang inovasi produk yang mementingkan keinginan masyarakat untuk mendapatkan kekuatan dari kalangan konsumen, Dengan mempertimbangkan usulan dari para orang tua maka penulis mencoba menawarkan prototype tempat tidur balita  yang sesuai dengan dimensi antropometri tubuh bayi di Indonesia. Dengan maksud tempat tidur bayi tersebut mampu memberikan kenyamanan dan keamanan bagi bayi, khususnya kepuasan bagi para orang tua dalam mengasuh atau memfasilitasi anaknya.  Metodologi penelitian dilakukan dengan penggalian data dari responden menggunakan metode  Quality Funcion Deployment  (QFD untuk mengetahui keinginan dari konsumen, serta data antropometri untuk mengetahui persentil dari ukuran yang diperlukan untuk merancang Tempat Tidur  Bayi (Baby Box yang sesuai dengan dimensi tubuh bayi di Indonesia. Hasil penelitian ini dapat diketahui atribut-atribut tempat tidur bayi yang sesuai dengan keinginan pelanggan meliputi : Tempat tidur mampu menahan berat dan gerakan bayi, Dilengkapi dengan kain tile pelindung dari gigitan nyamuk, Adanya rak tempat untuk menyimpan pakaian bayi, Warna tempat tidur yang cerah, Adanya kantong tas sehingga mudah dibawa. Ukuran tempat tidur bayi dikembangkan berdasarkan penerapan data antropometri dengan menggunakan persentil 5-th dan 95-th sehingga diperoleh ukuran tinggi tempat tidur bayi adalah 80cm, panjang 110 cm, dan lebar 80cm.

  3. The Chemical Engineer's Toolbox: A Glass Box Approach to Numerical Problem Solving

    Science.gov (United States)

    Coronell, Daniel G.; Hariri, M. Hossein

    2009-01-01

    Computer programming in undergraduate engineering education all too often begins and ends with the freshman programming course. Improvements in computer technology and curriculum revision have improved this situation, but often at the expense of the students' learning due to the use of commercial "black box" software. This paper describes the…

  4. PERFORMANCE EVALUATION OF 3D MODELING SOFTWARE FOR UAV PHOTOGRAMMETRY

    OpenAIRE

    H. Yanagi; H. Yanagi; H. Chikatsu

    2016-01-01

    UAV (Unmanned Aerial Vehicle) photogrammetry, which combines UAV and freely available internet-based 3D modeling software, is widely used as a low-cost and user-friendly photogrammetry technique in the fields such as remote sensing and geosciences. In UAV photogrammetry, only the platform used in conventional aerial photogrammetry is changed. Consequently, 3D modeling software contributes significantly to its expansion. However, the algorithms of the 3D modelling software are black box algori...

  5. Software testability and its application to avionic software

    Science.gov (United States)

    Voas, Jeffrey M.; Miller, Keith W.; Payne, Jeffery E.

    1993-01-01

    Randomly generated black-box testing is an established yet controversial method of estimating software reliability. Unfortunately, as software applications have required higher reliabilities, practical difficulties with black-box testing have become increasingly problematic. These practical problems are particularly acute in life-critical avionics software, where requirements of 10 exp -7 failures per hour of system reliability can translate into a probability of failure (POF) of perhaps 10 exp -9 or less for each individual execution of the software. This paper describes the application of one type of testability analysis called 'sensitivity analysis' to B-737 avionics software; one application of sensitivity analysis is to quantify whether software testing is capable of detecting faults in a particular program and thus whether we can be confident that a tested program is not hiding faults. We so 80 by finding the testabilities of the individual statements of the program, and then use those statement testabilities to find the testabilities of the functions and modules. For the B-737 system we analyzed, we were able to isolate those functions that are more prone to hide errors during system/reliability testing.

  6. A Major Step in Opening the Black Box of High-Molecular-Weight Dissolved Organic Nitrogen by Isotopic Labeling of Synechococcus and Multibond Two-Dimensional NMR.

    Science.gov (United States)

    Cao, Xiaoyan; Mulholland, Margaret R; Helms, John R; Bernhardt, Peter W; Duan, Pu; Mao, Jingdong; Schmidt-Rohr, Klaus

    2017-11-21

    Dissolved organic nitrogen (DON) comprises the largest pool of fixed N in the surface ocean, yet its composition has remained poorly constrained. Knowledge of the chemical composition of this nitrogen pool is crucial for understanding its biogeochemical function and reactivity in the environment. Previous work has suggested that high-molecular-weight (high-MW) DON exists only in two closely related forms, the secondary amides of peptides and of N-acetylated hexose sugars. Here, we demonstrate that the chemical structures of high-MW DON may be much more diverse than previously thought. We couple isotopic labeling of cyanobacterially derived dissolved organic matter with advanced two-dimensional NMR spectroscopy to open the "black box" of uncharacterized high-MW DON. Using multibond NMR correlations, we have identified novel N-methyl-containing amines and amides, primary amides, and novel N-acetylated sugars, which together account for nearly 50% of cyanobacterially derived high-MW DON. This study reveals unprecedented compositional details of the previously uncharacterized DON pool and outlines the means to further advance our understanding of this biogeochemically and globally important reservoir of organic nitrogen.

  7. Differences in physicians' self-reported knowledge of, attitudes toward, and responses to the black box warning on long-acting beta-agonists.

    Science.gov (United States)

    Karpel, Jill P; Peters, Jay I; Szema, Anthony M; Smith, Brad; Anderson, Paula J

    2009-10-01

    Inhaled corticosteroids and long-acting beta-agonists (LABAs) are recommended for treating moderate to severe persistent asthma. The Food and Drug Administration has issued a black box warning (BBW) for LABAs. To investigate physician knowledge of the BBW and its effect on the practice of specialists (pulmonologists and allergists) and primary care physicians (PCPs) (internists and family physicians). A total of 1,107 physicians responded to a questionnaire to determine their awareness of the BBW and whether it changed their practice. The group comprised 429 pulmonologists (38.8%), 395 allergists (35.7%), 141 internists (12.7%), 132 family physicians (11.9%), and 10 pediatricians (0.9%). Comparing specialists with PCPs, there was approximately a 10% difference in the rate of knowledge concerning the BBW (99.0% vs 90.8%, P BBW compared with 52.9% of family physicians and 40.3% of internists. Twice as many PCPs vs specialists agreed with the warning (45.6% vs 24.2%, P BBW for LABAs, there was a difference in how specialists and PCPs approached it and altered their prescribing habits.

  8. Virtual Box

    DEFF Research Database (Denmark)

    Davis, Hilary; Skov, Mikael B.; Stougaard, Malthe

    2007-01-01

    . This paper reports on the design, implementation and initial evaluation of Virtual Box. Virtual Box attempts to create a physical and engaging context in order to support reciprocal interactions with expressive content. An implemented version of Virtual Box is evaluated in a location-aware environment...

  9. Opening the Black Box of Financial AI with CLEAR-Trade: A CLass-Enhanced Attentive Response Approach for Explaining and Visualizing Deep Learning-Driven Stock Market Prediction

    OpenAIRE

    Kumar, Devinder; Taylor, Graham W; Wong, Alexander

    2017-01-01

    Deep learning has been shown to outperform traditional machine learning algorithms across a wide range of problem domains. However, current deep learning algorithms have been criticized as uninterpretable "black-boxes" which cannot explain their decision making processes. This is a major shortcoming that prevents the widespread application of deep learning to domains with regulatory processes such as finance. As such, industries such as finance have to rely on traditional models like decision...

  10. Bento Boxes

    Science.gov (United States)

    Hasio, Cindy

    2010-01-01

    Bento boxes are common objects in Japanese culture, designed to hold enough lunch for one person. They have individual compartments and sometimes multiple tiers for rice, vegetables, and other side dishes. They are made of materials ranging from wood, cloth, aluminum, or plastic. In general, the greater the number of foods, the better the box is…

  11. Broken links and black boxes

    DEFF Research Database (Denmark)

    Sindbæk, Søren Michael

    2013-01-01

    Long-distance communication has emerged as a particular focus for archaeological exploration using network theory, analysis, and modelling. Initial attempts to adapt methods from social network analysis to archaeological data have, however, struggled to produce decisive results. This paper argues...

  12. Unpacking the Black Box: A Formative Research Approach to the Development of Theory-Driven, Evidence-Based, and Culturally Safe Text Messages in Mobile Health Interventions.

    Science.gov (United States)

    Maar, Marion A; Yeates, Karen; Toth, Zsolt; Barron, Marcia; Boesch, Lisa; Hua-Stewart, Diane; Liu, Peter; Perkins, Nancy; Sleeth, Jessica; Wabano, Mary Jo; Williamson, Pamela; Tobe, Sheldon W

    2016-01-22

    evidence-based text message created by researchers and the message received by the recipient in mobile health interventions. These discrepancies were primarily generated by six mediators of meaning in SMS messages: (1) negative or non-affirming framing of advocacies, (2) fear- or stress-inducing content, (3) oppressive or authoritarian content, (4) incongruity with cultural and traditional practices, (5) disconnect with the reality of the social determinants of health and the diversity of cultures within a population, and (6) lack of clarity and/or practicality of content. These 6 mediators of meaning provide the basis for sound strategies for message development because they impact directly on the target populations' capability, opportunity, and motivation for behavior change. The quality of text messages impacts significantly on the effectiveness of a mobile health intervention. Our research underscores the urgent need for interventions to incorporate and evaluate the quality of SMS messages and to examine the mediators of meaning within each targeted cultural and demographic group. Reporting on this aspect of mobile health intervention research will allow researchers to move away from the current black box of SMS text message development, thus improving the transparency of the process as well as the quality of the outcomes.

  13. Breaking Open the Black Box: Isolating the Most Potent Features of a Web and Mobile Phone-Based Intervention for Depression, Anxiety, and Stress.

    Science.gov (United States)

    Whitton, Alexis E; Proudfoot, Judith; Clarke, Janine; Birch, Mary-Rose; Parker, Gordon; Manicavasagar, Vijaya; Hadzi-Pavlovic, Dusan

    2015-01-01

    Internet-delivered mental health (eMental Health) interventions produce treatment effects similar to those observed in face-to-face treatment. However, there is a large degree of variation in treatment effects observed from program to program, and eMental Health interventions remain somewhat of a black box in terms of the mechanisms by which they exert their therapeutic benefit. Trials of eMental Health interventions typically use large sample sizes and therefore provide an ideal context within which to systematically investigate the therapeutic benefit of specific program features. Furthermore, the growth and impact of mobile phone technology within eMental Health interventions provides an opportunity to examine associations between symptom improvement and the use of program features delivered across computer and mobile phone platforms. The objective of this study was to identify the patterns of program usage associated with treatment outcome in a randomized controlled trial (RCT) of a fully automated, mobile phone- and Web-based self-help program, "myCompass", for individuals with mild-to-moderate symptoms of depression, anxiety, and/or stress. The core features of the program include interactive psychotherapy modules, a symptom tracking feature, short motivational messages, symptom tracking reminders, and a diary, with many of these features accessible via both computer and mobile phone. Patterns of program usage were recorded for 231 participants with mild-to-moderate depression, anxiety, and/or stress, and who were randomly allocated to receive access to myCompass for seven weeks during the RCT. Depression, anxiety, stress, and functional impairment were examined at baseline and at eight weeks. Log data indicated that the most commonly used components were the short motivational messages (used by 68.4%, 158/231 of participants) and the symptom tracking feature (used by 61.5%, 142/231 of participants). Further, after controlling for baseline symptom severity

  14. Glove box

    International Nuclear Information System (INIS)

    Morita, Atsushi

    1990-01-01

    Wire rope earthquake proof supports having sufficient vibration transmitting and attenuating property are disposed between a fixed floor and the bottom of a glove box in order to improve earthquake proofness of the glove box. The vertical weight of the glove box is supported by support legs slidable on the surface of the fixed floor. The wire rope earthquake-proof supports when undergoing a load, cause stretching and rolling against the external force such as earthquakes, and provide flexible spring support and cause a great damping due to friction with strands. Further, the vertical weight is always supported by the support legs and, when a horizontal weight is applied, the glove box slides on the fixed floor freely with slidable members. In this way, stress concentration generated at joint portions of columns and beams can be moderated greatly and earthquake proofness can be improved. Further, quality control and maintenance for the device is almost unnecessary owing to excellent fatigue-resistant characteristics of the wire rope earthquake proof supports. (N.H.)

  15. Glove boxes

    International Nuclear Information System (INIS)

    Eisert, G.A.

    1979-01-01

    An arrangement for effecting access for performing work within a glove box comprises an elongate arm-length impermeable flexible sleeve, a fitting having an aperture therethrough, adapted to be secured in sealing relation in a port, in a wall of the glove box, the fitting including an outwardly extending lip having at least one continuous groove extending around its outer periphery, one end of the sleeve extending through the aperture in fitting and being folded back against the outer periphery of the lip, a resilient fastening ring securing the sleeve in sealing engagement in the groove, clamping means securing the sleeves to the lip and a glove secured in sealing relation via a bushing to the other end of the sleeve. (author)

  16. Non-existence of isometry-invariant Hadamard states for a Kruskal black hole in a box and for massless fields on 1+1 Minkowski spacetime with a uniformly accelerating mirror

    Science.gov (United States)

    Kay, Bernard S.; Lupo, Umberto

    2016-11-01

    We conjecture that (when the notion of Hadamard state is suitably adapted to spacetimes with timelike boundaries) there is no isometry-invariant Hadamard state for the massive or massless covariant Klein-Gordon equation defined on the region of the Kruskal spacetime to the left of a surface of constant Schwarzschild radius in the right Schwarzschild wedge when Dirichlet boundary conditions are put on that surface. We also prove that, with a suitable definition for ‘boost-invariant Hadamard state’ (which we call ‘strongly boost-invariant globally Hadamard’) which takes into account both the existence of the timelike boundary and the special infra-red pathology of massless fields in 1+1 dimensions, there is no such state for the massless wave equation on the region of 1+1 Minkowski space to the left of an eternally uniformly accelerating mirror—with Dirichlet boundary conditions at the mirror. We argue that this result is significant because, as we point out, such a state does exist if there is also a symmetrically placed decelerating mirror in the left wedge (and the region to the left of this mirror is excluded from the spacetime). We expect a similar existence result to hold for Kruskal when there are symmetrically placed spherical boxes in both right and left Schwarzschild wedges. Our Kruskal no-go conjecture raises basic questions about the nature of the black holes in boxes considered in black hole thermodynamics. If true, it would lend further support to the conclusion of Kay (2015 Gen. Relativ. Gravit. 47 1-27) that the nearest thing to a description of a black hole in equilibrium in a box in terms of a classical spacetime with quantum fields propagating on it has, for the classical spacetime, the exterior Schwarzschild solution, with the classical spacetime picture breaking down near the horizon. Appendix B to the paper points out the existence of, and partially fills, a gap in the proofs of the theorems in Kay and Wald (1991 Phys. Rep. 207 49-136).

  17. Using Mathematical Software to Introduce Fourier Transforms in Physical Chemistry to Develop Improved Understanding of Their Applications in Analytical Chemistry

    Science.gov (United States)

    Miller, Tierney C.; Richardson, John N.; Kegerreis, Jeb S.

    2016-01-01

    This manuscript presents an exercise that utilizes mathematical software to explore Fourier transforms in the context of model quantum mechanical systems, thus providing a deeper mathematical understanding of relevant information often introduced and treated as a "black-box" in analytical chemistry courses. The exercise is given to…

  18. "I Have Goals to Prove All Those People Wrong and Not Fit into Any One of Those Boxes": Paths of Resistance to Stereotypes among Black Adolescent Males

    Science.gov (United States)

    Rogers, Leoandra Onnie; Way, Niobe

    2016-01-01

    Adolescents form their identities by both accommodating (endorsing) and resisting (challenging) cultural stereotypes. Most research on Black males focuses on how they accommodate to negative stereotypes (e.g., delinquency, aggression), but a growing literature emphasizes how youth resist stereotypes. Semi-structured interviews were analyzed to…

  19. Black Willow

    Science.gov (United States)

    R. M. Krinard

    1980-01-01

    Black willow and other species of Salix together comprise a majority of the stocking. Cottonwood is the chief associate, particularly in the early stages, but green ash, sycamore, pecan, persimmon, waterlocust, American elm, baldcypress, red maple, sugarberry, box-elder, and in some areas, silver maple are invaders preceding the next successional stage.

  20. The future of grey-box fuzzing

    OpenAIRE

    Hjelt, Isak

    2017-01-01

    Society are becoming more dependent on software, and more artifacts are being connected to the Internet each day [31]. This makes the work of tracking down vulnerabilities in software a moral obligation for software developers. Since manual testing is expensive [7], automated bug finding techniques are attractive within the quality assurance field, since it can save companies a lot of money. This thesis summarizes the research of an automated bug finding technique called grey-box fuzzing, wit...

  1. Performance Evaluation of 3d Modeling Software for Uav Photogrammetry

    Science.gov (United States)

    Yanagi, H.; Chikatsu, H.

    2016-06-01

    UAV (Unmanned Aerial Vehicle) photogrammetry, which combines UAV and freely available internet-based 3D modeling software, is widely used as a low-cost and user-friendly photogrammetry technique in the fields such as remote sensing and geosciences. In UAV photogrammetry, only the platform used in conventional aerial photogrammetry is changed. Consequently, 3D modeling software contributes significantly to its expansion. However, the algorithms of the 3D modelling software are black box algorithms. As a result, only a few studies have been able to evaluate their accuracy using 3D coordinate check points. With this motive, Smart3DCapture and Pix4Dmapper were downloaded from the Internet and commercial software PhotoScan was also employed; investigations were performed in this paper using check points and images obtained from UAV.

  2. PERFORMANCE EVALUATION OF 3D MODELING SOFTWARE FOR UAV PHOTOGRAMMETRY

    Directory of Open Access Journals (Sweden)

    H. Yanagi

    2016-06-01

    Full Text Available UAV (Unmanned Aerial Vehicle photogrammetry, which combines UAV and freely available internet-based 3D modeling software, is widely used as a low-cost and user-friendly photogrammetry technique in the fields such as remote sensing and geosciences. In UAV photogrammetry, only the platform used in conventional aerial photogrammetry is changed. Consequently, 3D modeling software contributes significantly to its expansion. However, the algorithms of the 3D modelling software are black box algorithms. As a result, only a few studies have been able to evaluate their accuracy using 3D coordinate check points. With this motive, Smart3DCapture and Pix4Dmapper were downloaded from the Internet and commercial software PhotoScan was also employed; investigations were performed in this paper using check points and images obtained from UAV.

  3. Laryngeal (Voice Box) Cancer

    Science.gov (United States)

    ... ENTCareers Marketplace Find an ENT Doctor Near You Voice Box (Laryngeal) Cancer Voice Box (Laryngeal) Cancer Patient Health Information News media ... laryngeal cancer can be severe with respect to voice, breathing, or swallowing. It is fundamentally a preventable ...

  4. Shaping 3-D boxes

    DEFF Research Database (Denmark)

    Stenholt, Rasmus; Madsen, Claus B.

    2011-01-01

    Enabling users to shape 3-D boxes in immersive virtual environments is a non-trivial problem. In this paper, a new family of techniques for creating rectangular boxes of arbitrary position, orientation, and size is presented and evaluated. These new techniques are based solely on position data......F) docking experiment against an existing technique, which requires the user to perform the rotation and scaling of the box explicitly. The precision of the users' box construction is evaluated by a novel error metric measuring the difference between two boxes. The results of the experiment strongly indicate...

  5. Inner Market as a "Black Box"

    OpenAIRE

    Ari Belenkiy

    2001-01-01

    Each market has its singular characteristic. Its inner structure is directly responsible for the observed distributions of returns though this fact is widely overlooked. Big orders lead to doubling the tails. The behavior of a market maker with many or few ``friends'' who can reliably loan money or stock to him is quite different from the one without. After representing the inner market ``case'' we suggest how to analyze its structure.

  6. Opening the Black Box of Intermediation

    DEFF Research Database (Denmark)

    Nowinska, Agnieszka

    ) and at the interfirm level (between partners and within alliances and associations).The tentative results show that both of these levels are important in defining the intermediating firms' business models and in answering their environmental threats and in building up competitive advantage. The paper ends with a short......This paper attempts to answer how external environmental factors affect intermediating firms within the maritime industry - the middlemen that plays a very important role in the sector. The category encompasses firms such as liner and port agencies, freight forwarders and shipbrokers, who link......, by its global character and by volatility. As such, the industry offers an interesting and generalizable environment for research. Moreover, the choice of the middleman, an intermediary in the value chain, as the object of study, offers additional insights into the complex industry and value chain...

  7. Black-Box Superconducting Circuit Quantization

    Science.gov (United States)

    Nigg, Simon E.; Paik, Hanhee; Vlastakis, Brian; Kirchmair, Gerhard; Shankar, S.; Frunzio, Luigi; Devoret, M. H.; Schoelkopf, R. J.; Girvin, S. M.

    2012-06-01

    We present a semiclassical method for determining the effective low-energy quantum Hamiltonian of weakly anharmonic superconducting circuits containing mesoscopic Josephson junctions coupled to electromagnetic environments made of an arbitrary combination of distributed and lumped elements. A convenient basis, capturing the multimode physics, is given by the quantized eigenmodes of the linearized circuit and is fully determined by a classical linear response function. The method is used to calculate numerically the low-energy spectrum of a 3D transmon system, and quantitative agreement with measurements is found.

  8. Inside the black box: technology and economics

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, N.

    1982-01-01

    The author shows how specific features of individual technologies have shaped a number of variables of concern to economists: the rate of productivity improvement, the nature of the learning process underlying technological change itself, the speed of technology transfer, and the effectiveness of government policies that are intended to influence technologies in particular ways. The separate chapters reflect a primary concern with some of the distinctive aspects of industrial technologies in the 20th Century, such as the increasing reliance upon science, but also the considerable subtlety and complexity of the dialectic between science and technology. Other concerns include the rapid growth in the development cost associated with new technologies as well as the difficulty of predicting the eventual performance characteristics of newly emerging technologies. 447 footnotes and references, 4 figures, 11 tables

  9. Black box avatakse tantsuga / Aime Jõgi

    Index Scriptorium Estoniae

    Jõgi, Aime, 1958-

    1999-01-01

    Viljandi Kultuurikolledzhi musta lae, seinte ja põrandaga saal avatakse 23. sept. Eesti Suvetantsu Kompanii etendusega "Ehitusplats! Hoia sissepääs vaba!", lavastanud Berliini koreograaf Thomas Lehmen

  10. Opening the Black Box of Intermediation

    DEFF Research Database (Denmark)

    Nowinska, Agnieszka

    shipping companies with customers, regulatory authorities and suppliers. So far only fragmented information is available on the general value creation strategies of these intermediaries and their behaviour towards the environmental pressures, with the main contributions stressing competitive pressures...... and demanding customers. The aim of this paper is to use empirical research to increase our knowledge of this topic. The maritime industry is an example of a highly dynamic sector within which the premium for efficiency erodes fast. It is characterized by the complexity of its operations and its value chain...

  11. Integration testing through reusing representative unit test cases for high-confidence medical software.

    Science.gov (United States)

    Shin, Youngsul; Choi, Yunja; Lee, Woo Jin

    2013-06-01

    As medical software is getting larger-sized, complex, and connected with other devices, finding faults in integrated software modules gets more difficult and time consuming. Existing integration testing typically takes a black-box approach, which treats the target software as a black box and selects test cases without considering internal behavior of each software module. Though it could be cost-effective, this black-box approach cannot thoroughly test interaction behavior among integrated modules and might leave critical faults undetected, which should not happen in safety-critical systems such as medical software. This work anticipates that information on internal behavior is necessary even for integration testing to define thorough test cases for critical software and proposes a new integration testing method by reusing test cases used for unit testing. The goal is to provide a cost-effective method to detect subtle interaction faults at the integration testing phase by reusing the knowledge obtained from unit testing phase. The suggested approach notes that the test cases for the unit testing include knowledge on internal behavior of each unit and extracts test cases for the integration testing from the test cases for the unit testing for a given test criteria. The extracted representative test cases are connected with functions under test using the state domain and a single test sequence to cover the test cases is produced. By means of reusing unit test cases, the tester has effective test cases to examine diverse execution paths and find interaction faults without analyzing complex modules. The produced test sequence can have test coverage as high as the unit testing coverage and its length is close to the length of optimal test sequences. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. FRAMES Software System: Linking to the Statistical Package R

    Energy Technology Data Exchange (ETDEWEB)

    Castleton, Karl J.; Whelan, Gene; Hoopes, Bonnie L.

    2006-12-11

    This document provides requirements, design, data-file specifications, test plan, and Quality Assurance/Quality Control protocol for the linkage between the statistical package R and the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Versions 1.x and 2.0. The requirements identify the attributes of the system. The design describes how the system will be structured to meet those requirements. The specification presents the specific modifications to FRAMES to meet the requirements and design. The test plan confirms that the basic functionality listed in the requirements (black box testing) actually functions as designed, and QA/QC confirms that the software meets the client’s needs.

  13. Using Fuzzy Logic Techniques for Assertion-Based Software Testing Metrics.

    Science.gov (United States)

    Alakeel, Ali M

    2015-01-01

    Software testing is a very labor intensive and costly task. Therefore, many software testing techniques to automate the process of software testing have been reported in the literature. Assertion-Based automated software testing has been shown to be effective in detecting program faults as compared to traditional black-box and white-box software testing methods. However, the applicability of this approach in the presence of large numbers of assertions may be very costly. Therefore, software developers need assistance while making decision to apply Assertion-Based testing in order for them to get the benefits of this approach at an acceptable level of costs. In this paper, we present an Assertion-Based testing metrics technique that is based on fuzzy logic. The main goal of the proposed technique is to enhance the performance of Assertion-Based software testing in the presence of large numbers of assertions. To evaluate the proposed technique, an experimental study was performed in which the proposed technique is applied on programs with assertions. The result of this experiment shows that the effectiveness and performance of Assertion-Based software testing have improved when applying the proposed testing metrics technique.

  14. Thinking outside the Box

    Science.gov (United States)

    Fanshawe, Simon; Sriskandarajah, Dhananjayan

    2010-01-01

    Britain is not only more diverse than ever before, but that diversity itself is growing more diverse. Britain's simplistic "tick-box" approach to identity is in danger of inhibiting the very equality it seeks to promote. To question the tick-box is not to accuse local authorities of "political correctness gone mad". The notion…

  15. ALUMINUM BOX BUNDLING PRESS

    Directory of Open Access Journals (Sweden)

    Iosif DUMITRESCU

    2015-05-01

    Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

  16. Reviews Book: Enjoyable Physics Equipment: SEP Colorimeter Box Book: Pursuing Power and Light Equipment: SEP Bottle Rocket Launcher Equipment: Sciencescope GLE Datalogger Equipment: EDU Logger Book: Physics of Sailing Book: The Lightness of Being Software: Logotron Insight iLog Studio iPhone Apps Lecture: 2010 IOP Schools and Colleges Lecture Web Watch

    Science.gov (United States)

    2010-09-01

    WE RECOMMEND Enjoyable Physics Mechanics book makes learning more fun SEP Colorimeter Box A useful and inexpensive colorimeter for the classroom Pursuing Power and Light Account of the development of science in the 19th centuary SEP Bottle Rocket Launcher An excellent resource for teaching about projectiles GLE Datalogger GPS software is combined with a datalogger EDU Logger Remote datalogger has greater sensing abilities Logotron Insight iLog Studio Software enables datlogging, data analysis and modelling iPhone Apps Mobile phone games aid study of gravity WORTH A LOOK Physics of Sailing Book journeys through the importance of physics in sailing The Lightness of Being Study of what the world is made from LECTURE The 2010 IOP Schools and Colleges Lecture presents the physics of fusion WEB WATCH Planet Scicast pushes boundaries of pupil creativity

  17. Glove box shield

    Science.gov (United States)

    Brackenbush, L.W.; Hoenes, G.R.

    A shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user wthdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  18. Gray-box modelling approach for description of storage tunnel

    DEFF Research Database (Denmark)

    Harremoës, Poul; Carstensen, Jacob

    1999-01-01

    The dynamics of a storage tunnel is examined using a model based on on-line measured data and a combination of simple deterministic and black-box stochastic elements. This approach, called gray-box modeling, is a new promising methodology for giving an on-line state description of sewer systems. ...... in a SCADA system because the most important information on the specific system is provided on-line...

  19. Voice box (image)

    Science.gov (United States)

    The larynx, or voice box, is located in the neck and performs several important functions in the body. The larynx is involved in swallowing, breathing, and voice production. Sound is produced when the air which ...

  20. The POWHEG-BOX

    OpenAIRE

    Oleari, Carlo

    2010-01-01

    We review the key features of POWHEG, a method for interfacing parton-shower Monte Carlo generators to fixed next-to-leading order QCD computations. We describe a recently introduced framework, the POWHEG-BOX, that allows the automatic POWHEG implementation of any given NLO calculation. We present a few results for Higgs boson production via vector boson fusion and Z + 1 jet production, both processes available in the POWHEG-BOX.

  1. Boxes and Shelves

    OpenAIRE

    Hughes, Dean

    2008-01-01

    The Boxes and Shelves series from 2008 are are all made from the backing card from discarded writing pads. Boxes and Shelves extended my investigation of quotidian materials and their relationship to the origins of creative toil. Since 1996 my research has sought to identify and locate instances where the 'unmeasurable' meets the measurable. I have consistently employed a range of utilitarian materials such as bus seats, bus tickets, puddles, A4 writing paper, to present a series of 'problem ...

  2. A Method to Select Test Input Cases for Safety-critical Software

    International Nuclear Information System (INIS)

    Kim, Heeeun; Kang, Hyungook; Son, Hanseong

    2013-01-01

    This paper proposes a new testing methodology for effective and realistic quantification of RPS software failure probability. Software failure probability quantification is important factor in digital system safety assessment. In this study, the method for software test case generation is briefly described. The test cases generated by this method reflect the characteristics of safety-critical software and past inputs. Furthermore, the number of test cases can be reduced, but it is possible to perform exhaustive test. Aspect of software also can be reflected as failure data, so the final failure data can include the failure of software itself and external influences. Software reliability is generally accepted as the key factor in software quality since it quantifies software failures which can make a powerful system inoperative. In the KNITS (Korea Nuclear Instrumentation and Control Systems) project, the software for the fully digitalized reactor protection system (RPS) was developed under a strict procedure including unit testing and coverage measurement. Black box testing is one type of Verification and validation (V and V), in which given input values are entered and the resulting output values are compared against the expected output values. Programmable logic controllers (PLCs) were used in implementing critical systems and function block diagram (FBD) is a commonly used implementation language for PLC

  3. Music Software for Special Needs.

    Science.gov (United States)

    McCord, Kimberly

    2001-01-01

    Discusses the use of computer software for students with special needs in the music classroom. Focuses on software programs that are appropriate for children with special needs such as: "Musicshop,""Band-in-a-Box,""Rock Rap'n Roll,""Music Mania,""Music Ace" and "Music Ace 2," and "Children's Songbook." (CMK)

  4. Software Unit Testing during the Development of Digital Reactor Protection System of HTR-PM

    International Nuclear Information System (INIS)

    Guo Chao; Xiong Huasheng; Li Duo; Zhou Shuqiao; Li Jianghai

    2014-01-01

    Reactor Protection System (RPS) of High Temperature Gas-Cooled Reactor - Pebble bed Module (HTR-PM) is the first digital RPS designed and to be operated in the Nuclear Power Plant (NPP) of China, and its development process has receives a lot of concerns around the world. As a 1E-level safety system, the RPS has to be designed and developed following a series of nuclear laws and technical disciplines including software verification and validation (software V&V). Software V&V process demonstrates whether all stages during the software development are performed correctly, completely, accurately, and consistently, and the results of each stage are testable. Software testing is one of the most significant and time-consuming effort during software V&V. In this paper, we give a comprehensive introduction to the software unit testing during the development of RPS in HTR-PM. We first introduce the objective of the testing for our project in the aspects of static testing, black-box testing, and white-box testing. Then the testing techniques, including static testing and dynamic testing, are explained, and the testing strategy we employed is also introduced. We then introduce the principles of three kinds of coverage criteria we used including statement coverage, branch coverage, and the modified condition/decision coverage. As a 1E-level safety software, testing coverage needs to be up to 100% mandatorily. Then we talk the details of safety software testing during software development in HTR-PM, including the organization, methods and tools, testing stages, and testing report. The test result and experiences are shared and finally we draw a conclusion for the unit testing process. The introduction of this paper can contribute to improve the process of unit testing and software development for other digital instrumentation and control systems in NPPs. (author)

  5. Seismic stability of a standalone glove box structure

    International Nuclear Information System (INIS)

    Saraswat, A.; Reddy, G.R.; Ghosh, S.; Ghosh, A.K.; Kumar, Arun

    2014-01-01

    Highlights: • Glove box is a leak tight, safety related structure used for handling radiotoxic materials. • To study the seismic performance of a freestanding glove box, extensive shake table testing has been carried out. • Glove box maintained structural integrity and leak tightness up to design basis earthquake loading. • Detailed three-dimensional finite element model of the structure is developed and analyzed by using direct time integration methods. • Simplified numerical method is proposed and successfully applied, to quickly estimate sliding displacement and determine upper bounds for it. - Abstract: In a nuclear fuel cycle facility, radiotoxic materials are being handled in freestanding leak tight enclosures called glove boxes (GBs). These glove boxes act as a primary confinement for the radiotoxic materials. Glove boxes are designed as per codal requirements for class I component. They are designed to withstand extreme level of earthquake loading with a return period of 10,000 years. To evaluate seismic performance of the glove box, there is a need to check the stability (sliding and overturning), structural integrity (stresses and strains) and leak tightness under earthquake loading. Extensive shake table experiments were conducted on a single standalone glove box. Actual laboratory conditions were simulated during testing to check the response. After extensive shake table testing, glove box structure was also analyzed using finite element (FE) software. Detailed three-dimensional model of glove box structure was developed and analyzed using nonlinear time history method. It was observed that finite element methods could be utilized to accurately predict dynamic response of glove box structure. This paper discusses the details and results of shake table testing and methodology used for modelling and analysing freestanding glove box structure under seismic loading. In addition, simplified numerical procedure, developed using energy conservation

  6. Seismic stability of a standalone glove box structure

    Energy Technology Data Exchange (ETDEWEB)

    Saraswat, A., E-mail: anupams@barc.gov.in [Bhabha Atomic Research Centre, Mumbai (India); Reddy, G.R. [Bhabha Atomic Research Centre, Mumbai (India); Ghosh, S. [Indian Institute of Technology Bombay, Mumbai (India); Ghosh, A.K.; Kumar, Arun [Bhabha Atomic Research Centre, Mumbai (India)

    2014-09-15

    Highlights: • Glove box is a leak tight, safety related structure used for handling radiotoxic materials. • To study the seismic performance of a freestanding glove box, extensive shake table testing has been carried out. • Glove box maintained structural integrity and leak tightness up to design basis earthquake loading. • Detailed three-dimensional finite element model of the structure is developed and analyzed by using direct time integration methods. • Simplified numerical method is proposed and successfully applied, to quickly estimate sliding displacement and determine upper bounds for it. - Abstract: In a nuclear fuel cycle facility, radiotoxic materials are being handled in freestanding leak tight enclosures called glove boxes (GBs). These glove boxes act as a primary confinement for the radiotoxic materials. Glove boxes are designed as per codal requirements for class I component. They are designed to withstand extreme level of earthquake loading with a return period of 10,000 years. To evaluate seismic performance of the glove box, there is a need to check the stability (sliding and overturning), structural integrity (stresses and strains) and leak tightness under earthquake loading. Extensive shake table experiments were conducted on a single standalone glove box. Actual laboratory conditions were simulated during testing to check the response. After extensive shake table testing, glove box structure was also analyzed using finite element (FE) software. Detailed three-dimensional model of glove box structure was developed and analyzed using nonlinear time history method. It was observed that finite element methods could be utilized to accurately predict dynamic response of glove box structure. This paper discusses the details and results of shake table testing and methodology used for modelling and analysing freestanding glove box structure under seismic loading. In addition, simplified numerical procedure, developed using energy conservation

  7. Monitoring Instrument for X-Ray Box

    CERN Document Server

    Cifuentes Ospina, Alberto; Kuehn, Susanne; Schaepe, Steffen; CERN. Geneva. EP Department

    2017-01-01

    A humidity and temperature readout instrument has been designed and implemented in order to monitor the X-Ray Box used for testing the silicon detectors prototypes of the ITk. The sensors are connected to an Arduino Mega board equipped with 16 analog inputs and a serial port to a computer. A user-friendly software has been also designed in order to give an easy access to all measurements.

  8. Channel box compression device

    International Nuclear Information System (INIS)

    Nakamizo, Hiroshi; Tanaka, Yuki.

    1996-01-01

    The device of the present invention reduces the volume of spent fuel channel boxes of power plant facilities to eliminate secondary wastes, suppress generation of radiation sources and improve storage space efficiency. The device has a box-like shape. A support frame is disposed on the lateral side of the box for supporting spent channel boxes. A horizontal transferring unit and a vertical transferring compression unit driven by a driving mechanism are disposed in the support frame. Further, the compression unit may have a rotational compression roller so as to move freely in the transferring unit. In addition, the transferring unit and the driving mechanism may be disposed outside of pool water. With such a constitution, since spent channel boxes are compressed and bent by horizontal movement of the transferring unit and the vertical movement of the compression unit, no cut pieces or cut powders are generated. Further, if the transferring unit and the driving mechanism are disposed outside of the pool water, it is not necessary to make them waterproof, which facilitates the maintenance. (I.S.)

  9. 78 FR 41174 - Self-Regulatory Organizations; BOX Options Exchange LLC; Notice of Filing and Immediate...

    Science.gov (United States)

    2013-07-09

    ... Trade Management Software (``TMS'') Fee under Section V.B. The Exchange proposes to rename Section V.A... Exchange is proposing to remove Section V.B. ``Back Office Trade Management Software (``TMS'')'' from the Fee Schedule. The TMS Software is optional software to which BOX Participants may subscribe in order...

  10. Application of software quality assurance methods in validation and maintenance of reactor analysis computer codes

    International Nuclear Information System (INIS)

    Reznik, L.

    1994-01-01

    Various computer codes employed at Israel Electricity Company for preliminary reactor design analysis and fuel cycle scoping calculations have been often subject to program source modifications. Although most changes were due to computer or operating system compatibility problems, a number of significant modifications were due to model improvement and enhancements of algorithm efficiency and accuracy. With growing acceptance of software quality assurance requirements and methods, a program of implementing extensive testing of modified software has been adopted within the regular maintenance activities. In this work survey has been performed of various software quality assurance methods of software testing which belong mainly to the two major categories of implementation ('white box') and specification-based ('black box') testing. The results of this survey exhibits a clear preference of specification-based testing. In particular the equivalence class partitioning method and the boundary value method have been selected as especially suitable functional methods for testing reactor analysis codes.A separate study of software quality assurance methods and techniques has been performed in this work objective to establish appropriate pre-test software specification methods. Two methods of software analysis and specification have been selected as the most suitable for this purpose: The method of data flow diagrams has been shown to be particularly valuable for performing the functional/procedural software specification while the entities - relationship diagrams has been approved to be efficient for specifying software data/information domain. Feasibility of these two methods has been analyzed in particular for software uncertainty analysis and overall code accuracy estimation. (author). 14 refs

  11. Opto-Box

    CERN Document Server

    Bertsche, David; The ATLAS collaboration; Welch, Steven; Smith, Dale Shane; Che, Siinn; Gan, K.K.; Boyd, George Russell Jr

    2015-01-01

    The opto-box is a custom mini-crate for housing optical modules, which process and transfer optoelectronic data. The system tightly integrates electrical, mechanical, and thermal functionality into a small package of size 35x10x8 cm^3. Special attention was given to ensure proper shielding, grounding, cooling, high reliability, and environmental tolerance. The custom modules, which incorporate Application Specific Integrated Circuits (ASICs), were developed through a cycle of rigorous testing and redesign. In total, fourteen opto-boxes have been installed and loaded with modules on the ATLAS detector. They are currently in operation as part of the LHC run 2 data read-out chain.

  12. Teaching with Box Tops.

    Science.gov (United States)

    Raiser, Lynne; D'Zamko, Mary Elizabeth

    1984-01-01

    Using environmental materials (such as the phone book and placemats from fast food restaurants) can be a motivating way to teach learning disabled students skills and concepts, as shown in an approach to reading, math, science and nutrition, and social studies instruction using a JELL-O brand gelatin box. (CL)

  13. Glove box posting system

    International Nuclear Information System (INIS)

    McIntosh, A.E.

    1981-01-01

    A system for posting objects into closed containers, such as glove boxes, is described in which the bag used, preferably made of plastic, does not have to be fitted and sealed by the operator during each posting operation. (U.K.)

  14. Many-box locality

    Science.gov (United States)

    Zhou, Yuqian; Cai, Yu; Bancal, Jean-Daniel; Gao, Fei; Scarani, Valerio

    2017-11-01

    There is an ongoing search for a physical or operational definition for quantum mechanics. Several informational principles have been proposed which are satisfied by a theory less restrictive than quantum mechanics. Here, we introduce the principle of "many-box locality," which is a refined version of the previously proposed "macroscopic locality." These principles are based on coarse graining the statistics of several copies of a given box. The set of behaviors satisfying many-box locality for N boxes is denoted LNM B. We study these sets in the bipartite scenario with two binary measurements, in relation with the sets Q and Q1 +A B of quantum and "almost quantum" correlations, respectively. We find that the LNM B sets are, in general, not convex. For unbiased marginals, by working in the Fourier space we can prove analytically that LNM B⊈Q for any finite N , while L∞M B=Q . Then, with suitably developed numerical tools, we find an example of a point that belongs to L16M B but not to Q1 +A B. Among the problems that remain open is whether Q ⊂L∞M B .

  15. Mystery Box Marvels

    Science.gov (United States)

    Santos, Joel; Centurio, Tina

    2012-01-01

    What happens in the first week of school could very well set the stage for the rest of the school year. Setting high standards for science activities based in inquiry can start on the first day of science class and develop as the year unfolds. With the use of simple, readily available, inexpensive materials, an efficient mystery box lesson can be…

  16. IN-A-BOX

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 7; Issue 2. Claude Elwood Shannon. Priti Shankar. Article-in-a-Box Volume 7 Issue 2 February 2002 pp 2-3 ... Author Affiliations. Priti Shankar1. Department of Computer Science & Automation, Indian Institute of Science, Bangalore 560 012, India.

  17. IN-A-BOX

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 12. Vikram A Sarabhai. Mrinalini Sarabhai. Article-in-a-Box Volume 6 Issue 12 December 2001 pp 5-7. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/006/12/0005-0007. Author Affiliations. Mrinalini ...

  18. Internal structure of black holes

    International Nuclear Information System (INIS)

    Cvetic, Mirjam

    2013-01-01

    Full text: We review recent progress that sheds light on the internal structure of general black holes. We first summarize properties of general multi-charged rotating black holes both in four and five dimensions. We show that the asymptotic boundary conditions of these general asymptotically flat black holes can be modified such that a conformal symmetry emerges. These subtracted geometries preserve the thermodynamic properties of the original black holes and are of the Lifshitz type, thus describing 'a black hole in the asymptotically conical box'. Recent efforts employ solution generating techniques to construct interpolating geometries between the original black hole and their subtracted geometries. Upon lift to one dimension higher, these geometries lift to AdS 3 times a sphere, and thus provide a microscopic interpretation of the black hole entropy in terms of dual two-dimensional conformal field theory. (author)

  19. Black to Black

    DEFF Research Database (Denmark)

    Langkjær, Michael Alexander

    2012-01-01

    Pop musicians performing in black stage costume take advantage of cultural traditions relating to matters black. Stylistically, black is a paradoxical color: although a symbol of melancholy, pessimism, and renunciation, black also expresses minimalist modernity and signifies exclusivity (as is hi...... suggested that appreciation of the highly personal motives of both Siouxsie Sioux and Janelle Monáe in wearing black may be achieved via analogies with the minimalist sublime of American artists Frank Stella’s and Ad Reinhardt’s black canvasses.......Pop musicians performing in black stage costume take advantage of cultural traditions relating to matters black. Stylistically, black is a paradoxical color: although a symbol of melancholy, pessimism, and renunciation, black also expresses minimalist modernity and signifies exclusivity (as...... is hinted by Rudyard Kipling’s illustration of ‘The [Black] Cat That Walked by Himself’ in his classic children’s tale). It was well understood by uniformed Anarchists, Fascists and the SS that there is an assertive presence connected with the black-clad figure. The paradox of black’s abstract elegance...

  20. Opto-Box

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00377159; The ATLAS collaboration

    2015-01-01

    The opto-box is a custom mini-crate for housing optical modules, which process and transfer optoelectronic data. Many novel solutions were developed for the custom design and manufacturing. The system tightly integrates electrical, mechanical, and thermal functionality into a small package of size 35x10x8 cm$^{3}$. Special attention was given to ensure proper shielding, grounding, cooling, high reliability, and environmental tolerance. The custom modules, which incorporate Application Specific Integrated Circuits (ASICs), were developed through a cycle of rigorous testing and redesign. In total, fourteen opto-boxes have been installed and loaded with modules on the ATLAS detector. They are currently in operation as part of the LHC run 2 data read-out chain.

  1. Boxed Permutation Pattern Matching

    DEFF Research Database (Denmark)

    Amit, Mika; Bille, Philip; Cording, Patrick Hagge

    2016-01-01

    the goal is to only find the boxed subsequences of T that are order-isomorphic to P. This problem was introduced by Bruner and Lackner who showed that it can be solved in O(n3) time. Cho et al. [CPM 2015] gave an O(n2m) time algorithm and improved it to O(n2 logm). In this paper we present a solution...

  2. The Box Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactor...... description of this momentum flow. The Box Method is a practical method for the description of an Air Terminal Device which will save grid points and ensure the right level of the momentum flow....

  3. Reliable software systems via chains of object models with provably correct behavior

    International Nuclear Information System (INIS)

    Yakhnis, A.; Yakhnis, V.

    1996-01-01

    This work addresses specification and design of reliable safety-critical systems, such as nuclear reactor control systems. Reliability concerns are addressed in complimentary fashion by different fields. Reliability engineers build software reliability models, etc. Safety engineers focus on prevention of potential harmful effects of systems on environment. Software/hardware correctness engineers focus on production of reliable systems on the basis of mathematical proofs. The authors think that correctness may be a crucial guiding issue in the development of reliable safety-critical systems. However, purely formal approaches are not adequate for the task, because they neglect the connection with the informal customer requirements. They alleviate that as follows. First, on the basis of the requirements, they build a model of the system interactions with the environment, where the system is viewed as a black box. They will provide foundations for automated tools which will (a) demonstrate to the customer that all of the scenarios of system behavior are presented in the model, (b) uncover scenarios not present in the requirements, and (c) uncover inconsistent scenarios. The developers will work with the customer until the black box model will not possess scenarios (b) and (c) above. Second, the authors will build a chain of several increasingly detailed models, where the first model is the black box model and the last model serves to automatically generated proved executable code. The behavior of each model will be proved to conform to the behavior of the previous one. They build each model as a cluster of interactive concurrent objects, thus they allow both top-down and bottom-up development

  4. Outside the box

    International Nuclear Information System (INIS)

    Pichon, Max

    2011-01-01

    Full text: Queensland-based Hydrasyst wants to take its motto of 'Do more with less' into the greywater sector with a new water recycling and energy recovery technology launched in November, called The Grey Box. The company is initially targeting large industrial laundries as they are major generators of greywater and heavy energy users, but it has ambitions well beyond that. The average commercial laundry consumes 1-5ML of water a week, using about 16 litres for every 1kg of clothing washed. Hydrasyst director Stephen Balemi said The Grey Box can slash the volume by 80 per cent. While he was reluctant to disclose too much technical detail, he claimed it is the only technology serving the $1 billion a year laundry sector that combines microfiltration / ultrafiltration membrane technology and energy reduction components. The heart of the system is a ceramic hollow fibre membrane. Balemi said it produces higher filtrate quality than competitors, meaning the recycled water can be reused more often, and can process feed water of up to 70°C compared to typical ultrafiltration membranes that cap out at about 38°C. This means the recycled water can be reused at higher temperatures, with the heat in it recovered by a precise steam heater built into The Grey Box. “As an overall measure, it saves 80 per cent of the water that is processed and saves 20 per cent of the energy,” Balemi said. Four systems have already been installed, with one going into a large commercial laundry in south Queensland and another to AMP's state-of-the-art 6 Green Star building in Brisbane. “We can modify them slightly to suit the industry, depending on the quality of raw water they are trying to recycle and also depending on the size of the project,,” said Balemi. Where many organisations build systems to specification, The Grey Box is offered in three standard sizes: the HY20 (20kL per day, based on a 10 hour day), HY80 (80kL per day) and HY130 (130kL per day). They can

  5. Test procedure for boxed waste assay system

    International Nuclear Information System (INIS)

    Wachter, J.

    1994-01-01

    This document, prepared by Los Alamos National Laboratory's NMT-4 group, details the test methodology and requirements for Acceptance/Qualification testing of a Boxed Waste Assay System (BWAS) designed and constructed by Pajarito Scientific Corporation. Testing of the BWAS at the Plutonium Facility (TA55) at Los Alamos National Laboratory will be performed to ascertain system adherence to procurement specification requirements. The test program shall include demonstration of conveyor handling capabilities, gamma ray energy analysis, and imaging passive/active neutron accuracy and sensitivity. Integral to these functions is the system's embedded operating and data reduction software

  6. 46 CFR 111.81-1 - Outlet boxes and junction boxes; general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Outlet boxes and junction boxes; general. 111.81-1... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Outlet Boxes and Junction Boxes § 111.81-1 Outlet boxes and junction boxes; general. (a) The requirements of this subpart apply to each outlet box used with a lighting...

  7. The Classroom Animal: Box Turtles.

    Science.gov (United States)

    Kramer, David C.

    1986-01-01

    Provides basic information on the anatomy, physiology, behaviors, and distribution patterns of the box turtle. Offers suggestions for the turtle's care and maintenance in a classroom environment. (ML)

  8. Acsys in a box

    International Nuclear Information System (INIS)

    Briegel, C.; Finstrom, D.; Hendricks, B.; King, C.; Lackey, S.; Neswold, R.; Nicklaus, D.; Patrick, J.; Petrov, A.; Rechenmacher, R.; Schumann, C.; Smedinghoff, J.

    2012-01-01

    The Accelerator Control System (ACSYS) at Fermilab has evolved to enable this relatively large control system to be encapsulated into a 'box' such as a laptop. The goal was to provide a platform isolated from the 'online' control system. This platform can be used internally for making major upgrades and modifications without impacting operations. It also provides a stand-alone environment for research and development including a turnkey control system for collaborators. Over time, the code base running on Scientific Linux has enabled all the salient features of the Fermilab's control system to be captured in an off-the-shelf laptop. The anticipated additional benefits of packaging the system include improved maintenance, reliability, documentation, and future enhancements. (authors)

  9. ACYSYS in a box

    Energy Technology Data Exchange (ETDEWEB)

    Briegel, C.; Finstrom, D.; Hendricks, B.; King, C.; Lackey, S.; Neswold, R.; Nicklaus, D.; Patrick, J.; Petrov, A.; Rechenmacher, R.; Schumann, C.; /Fermilab

    2011-11-01

    The Accelerator Control System at Fermilab has evolved to enable this relatively large control system to be encapsulated into a 'box' such as a laptop. The goal was to provide a platform isolated from the 'online' control system. This platform can be used internally for making major upgrades and modifications without impacting operations. It also provides a standalone environment for research and development including a turnkey control system for collaborators. Over time, the code base running on Scientific Linux has enabled all the salient features of the Fermilab's control system to be captured in an off-the-shelf laptop. The anticipated additional benefits of packaging the system include improved maintenance, reliability, documentation, and future enhancements.

  10. Fault Localization Method by Partitioning Memory Using Memory Map and the Stack for Automotive ECU Software Testing

    Directory of Open Access Journals (Sweden)

    Kwanhyo Kim

    2016-09-01

    Full Text Available Recently, the usage of the automotive Electronic Control Unit (ECU and its software in cars is increasing. Therefore, as the functional complexity of such software increases, so does the likelihood of software-related faults. Therefore, it is important to ensure the reliability of ECU software in order to ensure automobile safety. For this reason, systematic testing methods are required that can guarantee software quality. However, it is difficult to locate a fault during testing with the current ECU development system because a tester performs the black-box testing using a Hardware-in-the-Loop (HiL simulator. Consequently, developers consume a large amount of money and time for debugging because they perform debugging without any information about the location of the fault. In this paper, we propose a method for localizing the fault utilizing memory information during black-box testing. This is likely to be of use to developers who debug automotive software. In order to observe whether symbols stored in the memory have been updated, the memory is partitioned by a memory map and the stack, thus the fault candidate region is reduced. A memory map method has the advantage of being able to finely partition the memory, and the stack method can partition the memory without a memory map. We validated these methods by applying these to HiL testing of the ECU for a body control system. The preliminary results indicate that a memory map and the stack reduce the possible fault locations to 22% and 19% of the updated memory, respectively.

  11. What Makes a Better Box?

    Science.gov (United States)

    Moyer, Richard; Everett, Susan

    2010-01-01

    Every morning, many Americans start their day with a bowl of cereal. Some spend time while they eat breakfast reading the back of the cereal box, but few consider its size, shape, and construction, or realize that it was designed by an engineer. This article describes a lesson in which students design, build, and critique cereal boxes. The lesson…

  12. Spirit Boxes: Expressions of Culture.

    Science.gov (United States)

    DeMuro, Ted

    1984-01-01

    After studying the culture and art of the ancient civilizations of South America, Mesopotamia, Greece, and Egypt, secondary level art students made spirit boxes as expressions of the various cultures. How to make the boxes and how to prepare the face molds are described. (RM)

  13. Unconventional Bearing Capacity Analysis and Optimization of Multicell Box Girders

    Directory of Open Access Journals (Sweden)

    Jovan Tepic

    2014-01-01

    Full Text Available This study deals with unconventional bearing capacity analysis and the procedure of optimizing a two-cell box girder. The generalized model which enables the local stress-strain analysis of multicell girders was developed based on the principle of cross-sectional decomposition. The applied methodology is verified using the experimental data (Djelosevic et al., 2012 for traditionally formed box girders. The qualitative and quantitative evaluation of results obtained for the two-cell box girder is realized based on comparative analysis using the finite element method (FEM and the ANSYS v12 software. The deflection function obtained by analytical and numerical methods was found consistent provided that the maximum deviation does not exceed 4%. Multicell box girders are rationally designed support structures characterized by much lower susceptibility of their cross-sectional elements to buckling and higher specific capacity than traditionally formed box girders. The developed local stress model is applied for optimizing the cross section of a two-cell box carrier. The author points to the advantages of implementing the model of local stresses in the optimization process and concludes that the technological reserve of bearing capacity amounts to 20% at the same girder weight and constant load conditions.

  14. Well-Defined Coverage Metrics for the Glass Box Test

    OpenAIRE

    Schmidberger, Rainer

    2014-01-01

    Part 2: Tools and Frameworks; International audience; The Glass Box Test (GBT), also known as White Box Test or Structural Test, shows which parts of the program under test have, or have not, been executed. Many GBT tools are available for almost any programming language. Industry standards for safety-critical software require a very high or even complete coverage. At first glance, the GBT seems to be a well-established and mature testing technique that is based on standardized metrics. But o...

  15. Influence of dimension box differences and time differences during operations of red box for motorcycles at signalized intersection

    Science.gov (United States)

    Mulyadi, Agah Muhammad

    2017-11-01

    Performance of signalized intersection has declined due to a large number of motorcycles. The number of motorcycles reached 98.2 million units and the composition of motorcycles has reached around 81.7% of the total composition of vehicles in Indonesia (AISI, 2017). To solve that problem, the red box for motorcycles are provided at the signalized intersection. Red box for the motorcycle at signalized intersections was developed from the concept of Advance Stop Line (ASL) for bicycles. The Red Box was developed to split the queue between motorcycles and other vehicles when waiting at red light. This paper aims to evaluate the influence of the red box dimension and red time operation differences. The survey was conducted as many as 30 cycles of traffic signals per day. The data were analyzed using software IBM SPSS Statistics 20 by using Analysis of Variance (ANOVA) to obtain p-value (significant). The analysis shows that there are insignificant influences between the occupancy rates to the dimension of Red Box. Furthermore, that there is a significant difference that shows the dependency of only motorcycles in the Red Box Area towards red time operation.

  16. Thinking Inside the Box

    International Nuclear Information System (INIS)

    Boeheim, Charles T.

    2007-01-01

    In early 2007, SLAC was faced with a shortage of both electrical power and cooling in the main computer building, at the same time that the BaBar collaboration needed a new cluster of 250 batch machines installed. A number of different options were explored for the expansion. Provision of additional electrical power to the building was estimated to take one to two years, and cost several million dollars; additional cooling was even worse. Space in a Silicon Valley co-location facilities was reasonable on a one-year timescale, but broke even in costs by the end of three years, and were more expensive after that. There were also unresolved questions about the affects of additional latency from an offsite compute cluster to the onsite disk servers. The option of converting existing experimental hall space into computer space was estimated at one year, with uncertain availability. An option to aggressively replace several existing clusters with more power-efficient equipment was studied closely, but was disruptive to continued operations, expensive, and didn't provide any additional headroom. Finally, the installation of a Sun Project Blackbox (PBB) unit was selected as providing the capacity on a timescale of six months for a reasonable cost with minimal disruption to service. SLAC obtained and installed a beta unit and have been running it in production since September 2007. The experiences described are with the Early Access version of the PBB. The production version of the box has engineering changes based in part on our experiences

  17. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  18. Automatic Generation of Basis Component Path Coverage for Software Architecture Testing

    OpenAIRE

    Lijun Lun; Shaoting Wang; Xin Chi; Hui Xu

    2017-01-01

    Architecture-centric development is one of the most promising methods for improving software quality, reducing software cost and raising software productivity. Software architecture research not only focuses on the design phase, but also covers every phase of software life cycle. Software architecture has characteristics different from traditional software, conventional testing methods do not apply directly to software architecture. Basis path testing is a very simple and efficient white-box ...

  19. Learning Intelligent Dialogs for Bounding Box Annotation

    OpenAIRE

    Konyushkova, Ksenia; Uijlings, Jasper; Lampert, Christoph; Ferrari, Vittorio

    2017-01-01

    We introduce Intelligent Annotation Dialogs for bounding box annotation. We train an agent to automatically choose a sequence of actions for a human annotator to produce a bounding box in a minimal amount of time. Specifically, we consider two actions: box verification [37], where the annotator verifies a box generated by an object detector, and manual box drawing. We explore two kinds of agents, one based on predicting the probability that a box will be positively verified, and the other bas...

  20. Microclimate boxes for panel paintings

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1998-01-01

    The use of microclimate boxes to protect vulnerable panel paintings is, therefore, not a new phenomenon of the past two or three decades. Rather, it has been a concern for conservators and curators to protect these objects of art at home and in transit since the end of the nineteenth century....... The increased number of travelling exhibitions in recent years has heightened the need to protect paintings during circulation (Thomson 1961; Mecklenburg 1991). The use and design of microclimate boxes have been evolving since 1892. These boxes may be divided into three broad groups: those using an active...

  1. Tensile strength and the mining of black holes.

    Science.gov (United States)

    Brown, Adam R

    2013-11-22

    There are a number of important thought experiments that involve raising and lowering boxes full of radiation in the vicinity of black hole horizons. This Letter looks at the limitations placed on these thought experiments by the null energy condition, which imposes a fundamental bound on the tensile-strength-to-weight ratio of the materials involved, makes it impossible to build a box near the horizon that is wider than a single wavelength of the Hawking quanta, and puts a severe constraint on the operation of "space elevators" near black holes. In particular, it is shown that proposals for mining black holes by lowering boxes near the horizon, collecting some Hawking radiation, and dragging it out to infinity cannot proceed nearly as rapidly as has previously been claimed. As a consequence of this limitation, the boxes and all the moving parts are superfluous and black holes can be destroyed equally rapidly by threading the horizon with strings.

  2. Black holes

    International Nuclear Information System (INIS)

    Feast, M.W.

    1981-01-01

    This article deals with two questions, namely whether it is possible for black holes to exist, and if the answer is yes, whether we have found any yet. In deciding whether black holes can exist or not the central role in the shaping of our universe played by the forse of gravity is discussed, and in deciding whether we are likely to find black holes in the universe the author looks at the way stars evolve, as well as white dwarfs and neutron stars. He also discusses the problem how to detect a black hole, possible black holes, a southern black hole, massive black holes, as well as why black holes are studied

  3. DIRECT KICKS IN BOXING

    Directory of Open Access Journals (Sweden)

    Izet Kahrović

    2009-11-01

    Full Text Available Hit directly, giving any impact maximum muscle strength is skill, and it is neces- sary to the exercise and learning to make it perfect. Training begins with oral statement, so that students get to know with the techni- que that works. After oral exposure, it is necessary to create a good notion on technology that is adopted. The best way for the creation of good notion is a good demonstration. In direct training kicks in the box, you need patience and gradualness and there- fore uses a large number of additional exercises. In their work with beginners, in the first class, individual elements of technology, and also direct blow, it is necessary to separate the parts and run them on multiple commands, to later come to the confluence in one command. Direct wounds, with left and right hand, can be run from the towns, on the head and body, from the movement, to step forward, step back and step aside, the remedy to the left and right side. Left direct is taking out from a running protrusion hands, but kick, which is a pro- duct of the system, ankle-knee-pelvis and shoulder forward horizontaly. Set at the time of stripes, body weight over the left leg. Right direct from the place, starting ekscentrical reflecsive impuls of a extensor muscle in ankle, knee and joint of a hip.This kind of a sud- den movement is running simultaneously with the rotation of the body around vertical (longitudinal axis, with the transfer body weight on the left leg. Further movement to the hand which serves as a lever, which is transmitted through the power stroke

  4. Article-in-a-Box

    Indian Academy of Sciences (India)

    Volume 1 Issue 5 May 1996 pp 2-2 Article-in-a-Box. Chief Editor's column / The First Electronic Computer · V Rajaraman · More Details Fulltext PDF. Volume 1 Issue 6 June 1996 pp 2-4 Article-in-a-Box. Konrad Lorenz · Raghavendra Gadagkar · More Details Fulltext PDF. Volume 1 Issue 8 August 1996 pp 3-4 Article-in-a- ...

  5. Fuel element box inspection device

    International Nuclear Information System (INIS)

    Ortmayer, R.M.; Pick, W.

    1985-01-01

    The invention concerns a device for inspecting the outer geometry of a long fuel element box by measuring the surface contours over its longitudinal crossection and along its length by sensors. These are kept in a sledge which can be moved along the fuel element guide in a slot guide. The measurement signals reach an evaluation device outside the longitudinal box. (orig./HP) [de

  6. SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

    Directory of Open Access Journals (Sweden)

    Nur Aini Rakhmawati

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

  7. Black Alcoholism.

    Science.gov (United States)

    Watts, Thomas D.; Wright, Roosevelt

    1988-01-01

    Examines some aspects of the problem of alcoholism among Blacks, asserting that Black alcoholism can best be considered in an ecological, environmental, sociocultural, and public health context. Notes need for further research on alcoholism among Blacks and for action to reduce the problem of Black alcoholism. (NB)

  8. Black Culture

    Science.gov (United States)

    Brown, Angela Khristin

    2013-01-01

    The migration of blacks in North America through slavery became united. The population of blacks passed down a tradition of artist through art to native born citizens. The art tradition involved telling stories to each generation in black families. The black culture elevated by tradition created hope to determine their personal freedom to escape…

  9. Software Metrics and Software Metrology

    CERN Document Server

    Abran, Alain

    2010-01-01

    Most of the software measures currently proposed to the industry bring few real benefits to either software managers or developers. This book looks at the classical metrology concepts from science and engineering, using them as criteria to propose an approach to analyze the design of current software measures and then design new software measures (illustrated with the design of a software measure that has been adopted as an ISO measurement standard). The book includes several case studies analyzing strengths and weaknesses of some of the software measures most often quoted. It is meant for sof

  10. Forever software

    NARCIS (Netherlands)

    Rensink, Arend; Margaria, Tiziana; Steffen, Bernhard

    2014-01-01

    Any attempt to explain software engineering to a lay audience soon falls back on analogy: building software is like building a bridge, a car, a television set. A large part of the established practice within software engineering is also based on this premise. However, the analogy is false in some

  11. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  12. First-aid boxes - Reminder

    CERN Multimedia

    GS Department

    2010-01-01

    With a view to ensuring optimum use of the first-aid boxes on the CERN site, we should like to remind you of various changes introduced in March 2009: The TSO of the buildings concerned is responsible for the first-aid boxes, including checking their contents.   First-aid boxes may be restocked ONLY at the CERN stores (SCEM No. 54.99.80). This is no longer possible at the Infirmary. The associated cost is charged to the Departments.   First-aid boxes should be used only for mild injuries. All other cases should be referred to the Medical Service Infirmary (Bldg. 57 – ground-floor, tel. 73802) between 8.00 a.m. and 5.30 p.m. or to the Fire and Rescue Service (tel. 74444). N.B.: This information does not apply to the red emergency first-aid boxes in the underground areas or to the emergency kits for use in the event of being splashed with hydrofluoric acid.

  13. Box graphs and resolutions I

    Directory of Open Access Journals (Sweden)

    Andreas P. Braun

    2016-04-01

    Full Text Available Box graphs succinctly and comprehensively characterize singular fibers of elliptic fibrations in codimension two and three, as well as flop transitions connecting these, in terms of representation theoretic data. We develop a framework that provides a systematic map between a box graph and a crepant algebraic resolution of the singular elliptic fibration, thus allowing an explicit construction of the fibers from a singular Weierstrass or Tate model. The key tool is what we call a fiber face diagram, which shows the relevant information of a (partial toric triangulation and allows the inclusion of more general algebraic blowups. We shown that each such diagram defines a sequence of weighted algebraic blowups, thus providing a realization of the fiber defined by the box graph in terms of an explicit resolution. We show this correspondence explicitly for the case of SU(5 by providing a map between box graphs and fiber faces, and thereby a sequence of algebraic resolutions of the Tate model, which realizes each of the box graphs.

  14. Decontamination of TRU glove boxes

    International Nuclear Information System (INIS)

    Crawford, J.H.

    1978-03-01

    Two glove boxes that had been used for work with transuranic nuclides (TRU) for about 12 years were decontaminated in a test program to collect data for developing a decontamination facility for large equipment highly contaminated with alpha emitters. A simple chemical technique consisting of a cycle of water flushes and alkaline permanganate and oxalic acid washes was used for both boxes. The test showed that glove boxes and similar equipment that are grossly contaminated with transuranic nuclides can be decontaminated to the current DIE nonretrievable disposal guide of <10 nCi TRU/g with a moderate amount of decontamination solution and manpower. Decontamination of the first box from an estimated 1.3 Ci to about 5 mCi (6 nCi/g) required 1.3 gallons of decontamination solution and 0.03 man-hour of work for each square foot of surface area. The second box was decontaminated from an estimated 3.4 Ci to about 2.8 mCi (4.2 nCi/g) using 0.9 gallon of decontamination solution and 0.02 man-hour for each square foot of surface area. Further reductions in contamination were achieved by repetitive decontamination cycles, but the effectiveness of the technique decreased sharply after the initial cycle

  15. Evolution of Black-Box Models Based on Volterra Series

    Directory of Open Access Journals (Sweden)

    Daniel D. Silveira

    2015-01-01

    Full Text Available This paper presents a historical review of the many behavioral models actually used to model radio frequency power amplifiers and a new classification of these behavioral models. It also discusses the evolution of these models, from a single polynomial to multirate Volterra models, presenting equations and estimation methods. New trends in RF power amplifier behavioral modeling are suggested.

  16. Intellectual Capital and Innovative Work Behaviour: Opening the Black Box

    OpenAIRE

    Mura, Matteo; Lettieri, Emanuele; Spiller, Nicola; Radaelli, Giovanni

    2012-01-01

    Continuous improvement initiatives have proliferated among manufacturing and services organizations. In this context, knowledge has been claimed to play a key role, as a significant antecedent of an organization’s ability to continuously improve its performance. At the same time, attempts to implement knowledge management initiatives prove fruitless if employees are not fully motivated and engaged, and our present understanding of how to promote and facilitate such behaviours remains limited....

  17. Business Paradoxes, Black Boxes, and Big Data: Beyond Organizational Ambidexterity

    DEFF Research Database (Denmark)

    Bøe-Lillegraven, Tor

    This is a study of the conflicts involved when firms try to do new things. Try too little, and you risk being left behind as new competition realigns the playing field around you. Try hard, and you risk cannibalizing and slowly eroding away your legacy business. This story has been told in many...... forms. The focus of this thesis is ambidexterity - the ability for a firm to exploit mature skills and existing business paradigms while simultaneously exploring technological innovations and new market opportunities. This study sets out to obtain a multilevel understanding of the individual, firm...

  18. Iron Homeostasis in Peripheral Nervous System, Still a Black Box?

    Science.gov (United States)

    Taveggia, Carla

    2014-01-01

    Abstract Significance: Iron is the most abundant transition metal in biology and an essential cofactor for many cellular enzymes. Iron homeostasis impairment is also a component of peripheral neuropathies. Recent Advances: During the past years, much effort has been paid to understand the molecular mechanism involved in maintaining systemic iron homeostasis in mammals. This has been stimulated by the evidence that iron dyshomeostasis is an initial cause of several disorders, including genetic and sporadic neurodegenerative disorders. Critical Issues: However, very little has been done to investigate the physiological role of iron in peripheral nervous system (PNS), despite the development of suitable cellular and animal models. Future Directions: To stimulate research on iron metabolism and peripheral neuropathy, we provide a summary of the knowledge on iron homeostasis in the PNS, on its transport across the blood–nerve barrier, its involvement in myelination, and we identify unresolved questions. Furthermore, we comment on the role of iron in iron-related disorder with peripheral component, in demyelinating and metabolic peripheral neuropathies. Antioxid. Redox Signal. 21, 634–648. PMID:24409826

  19. Illuminating the Black Box of Entrepreneurship Education Programs

    Science.gov (United States)

    Maritz, Alex; Brown, Christopher R.

    2013-01-01

    Purpose: The aim of this paper is to explore the components of entrepreneurship education programs (EEPs) and their interrelationships to develop a conceptual framework through which entrepreneurship education may be contextually evaluated and developed. Design/methodology/approach: The paper presents an extensive literature review of the…

  20. Opening the "black box" of current creativity research

    DEFF Research Database (Denmark)

    Hoffmann Birk, Rasmus; Ernø, Steffen

    This presentation aims to problematise the ways in which creativity is defined and measured in recent studies on the topic. For this purpose, we analyzed 58 articles on creativity, selected from within the sub-fields of neuropsychology, psychometrics and developmental psychology published from 2009......-2012. The sub-fields were chosen because of their prominence in psychological research and research on creativity. The articles were procured from the PsycINFO database, with selection criteria being that they must be peer-reviewed and empirical studies. Typical definitions of creativity were "novelty plus...... value" or none at all. Creativity was mostly measured with different types of divergent thinking tests. There appears to be a lack of deeper theoretical and methodological discussions of creativity in the literature, which creates a disconnection between definitions, methodologies and the interpretation...

  1. Opening the black box: the patient mix of GP trainees

    NARCIS (Netherlands)

    de Jong, Jip; Visser, Mechteld R. M.; Mohrs, Jacob; Wieringa-de Waard, Margreet

    2011-01-01

    The variety of health problems (patient mix) that medical trainees encounter is presumed to be sufficient to master the required competencies. To describe the patient mix of GP trainees, to study differences in patient mix between first-year and third-year GP trainees, and to investigate differences

  2. Opening the black box: understanding cross-media effects

    NARCIS (Netherlands)

    Voorveld, H.A.M.; Neijens, P.C.; Smit, E.G.

    2011-01-01

    Despite their popularity, the reasons why cross-media campaigns are more successful than single medium campaigns are still unknown. Therefore, the aim of this study is (a) to investigate which psychological processes are present when people are exposed to cross-media campaigns, and (b) to examine to

  3. Technology for noninvasive mechanical ventilation: looking into the black box

    Directory of Open Access Journals (Sweden)

    Ramon Farré

    2016-03-01

    Full Text Available Current devices for providing noninvasive respiratory support contain sensors and built-in intelligence for automatically modifying ventilation according to the patient's needs. These devices, including automatic continuous positive airway pressure devices and noninvasive ventilators, are technologically complex and offer a considerable number of different modes of ventilation and setting options, the details of which are sometimes difficult to capture by the user. Therefore, better predicting and interpreting the actual performance of these ventilation devices in clinical application requires understanding their functioning principles and assessing their performance under well controlled bench test conditions with simulated patients. This concise review presents an updated perspective of the theoretical basis of intelligent continuous positive airway pressure and noninvasive ventilation devices, and of the tools available for assessing how these devices respond under specific ventilation phenotypes in patients requiring breathing support.

  4. Transportation in Laboratory Rats : Effects of a Black Box

    NARCIS (Netherlands)

    Arts, J.W.M.

    2016-01-01

    Laboratory Animal Science is a multidisciplinary science contributing to the humane use and care of animals and to the quality of animal experiments. Animal staff, researchers and regulators strive continuously to improving welfare of animals used in research. Transportation of small laboratory

  5. Opening the psychological black box in genetic counseling

    NARCIS (Netherlands)

    Vos, Joël

    2011-01-01

    Women from families in which many individuals have developed breast and/or ovarian cancer may request for DNA-testing. A DNA-test result may disclose their own risks to develop cancer (again), their relatives’ risks and subsequent options for medical surveillance. This thesis describes several

  6. Opening the black box of QS World University Rankings

    OpenAIRE

    Mu-Hsuan Huang

    2012-01-01

    In the era of globalization, the trend of university rankings gradually shifts from country-wide analyses to world-wide analyses. Relatively high analytical weightings on reputational surveys have led Quacquarelli Symonds (QS) World University Rankings to criticisms over the years. This study provides a comprehensive discussion of the indicators and weightings adopted in the QS survey. The article discusses several debates stirred in the academia on QS. Debates on this ranking system are pres...

  7. Illuminating the Black Box of Entrepreneurship Education Programmes: Part 2

    Science.gov (United States)

    Maritz, Alex

    2017-01-01

    Purpose: The purpose of this paper is to provide a justified, legitimate and validated model on entrepreneurship education programmes (EEPs), by combining recent research and scholarship in leading edge entrepreneurship education (EE). Design/methodology/approach: A systematic literature review of recent EE research and scholarship is followed by…

  8. Opening the Black Box of Social Cognitive Mapping

    Science.gov (United States)

    Neal, Zachary P.; Neal, Jennifer Watling

    2013-01-01

    This article provides Zachary P. Neal and Jennifer Watling Neal's response to Thomas W. Farmer and Hongling Xie's commentary on Neal and Neal's "Multiple Meanings of Peer Groups in Social Cognitive Mapping." Neal and Neal assert that many of Farmer and Xie's comments highlight the motivation behind their original…

  9. Black-box optimization benchmarking of PRCGA on noisy testbed ...

    African Journals Online (AJOL)

    Journal of Computer Science and Its Application. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 20, No 2 (2013) >. Log in or Register to get access to full text downloads.

  10. Unraveling the Black Box of New Venture Team Processes

    DEFF Research Database (Denmark)

    Bjørnåli, Ekaterina S.; Knockaert, Mirjam; Foss, Nicolai Juul

    2017-01-01

    This chapter argues that new venture team (NVT) processes are relatively ill-understood in the entrepreneurship literature, and describes various theoretical and empirical research avenues that may be pursued in order to improve our understanding of these processes. It then focuses on the widely ...

  11. What's in the black box of arthritis rehabilitation?

    DEFF Research Database (Denmark)

    Grotle, Margreth; Klokkerud, Mari; Kjeken, Ingvild

    2013-01-01

    Background: In evaluating complex interventions, it is a challenge for researchers to provide transparent reporting of the intervention content with sufficient detail and clarity such that effects can be compared across studies or countries. Objective: To describe and compare the content of curre...

  12. Unlocking the black box: teaching mathematical modeling with popular culture.

    Science.gov (United States)

    Lofgren, Eric T

    2016-10-01

    Mathematical modeling is an important tool in biological research, allowing for the synthesis of results from many studies into an understanding of a system. Despite this, the need for extensive subject matter knowledge and complex mathematics often leaves modeling as an esoteric subspecialty. A 2-fold approach can be used to make modeling more approachable for students and those interested in obtaining a functional knowledge of modeling. The first is the use of a popular culture disease system-a zombie epidemic-to allow for exploration of the concepts of modeling using a flexible framework. The second is the use of available interactive and non-calculus-based tools to allow students to work with and implement models to cement their understanding. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Distributed R and D. Inside the Black Box

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard

    2006-01-01

    During the last few decades business R and D has changed from beeing an in-house activity to beeing an activty offshored, outsourced or made as joint venture with other other companies or R and D institutions. Gerybadze and Reger has in an article (Recent Changes in the Management of Innovation...... and refocusing of activities. In the paper analysis has been made from about 15 Danish R and D intensive companies. In two pharmaceutical companies research activities have been moved to China in one case as offshoring and in another as a joint venture. In one case some clinical tests have been moved to India...

  14. Identifying competencies of boxing coaches

    Directory of Open Access Journals (Sweden)

    Ioannis Tasiopoulos

    2014-10-01

    Full Text Available The purpose of this study was to find out the management skills required by boxing coaches to administrate their clubs. For the purposes of this study a scale was constructed which was answered by 98 boxing coaches. Explanatory factor analysis revealed seven factors: Communication-public relations (5 items, event management (4 items, management techniques (4 items, new technologies (4 items, prevention-safety (2 items, sport (5 items and sports facilities (2 items. The Cronbach of the scale was 0.85. The five competencies that rated by the coaches were: Supervisors of the area of training, maintaining excellent communication with athletes, using new technologies (e-mail, internet, handling disciplinary matters, accidents, complaints and reports on some sporting games and promoted harmony among athletes. We concluded that boxing coaches understand that the competencies required for meeting their obligations, were related to sports, prevention, safety and communications-public relations.

  15. Software Licensing

    OpenAIRE

    Nygrýnová, Dominika

    2014-01-01

    Summary: Software Licensing The thesis deals with different practical aspects of commercial software licensing from the perspective of the Czech legal system. The focus is put on software license agreement as the most important legal instrument granting rights of use for computer programs. The thesis opens with a summary of Czech legislation in force in this area in the context of European community law and international law. The legislation in effect is largely governed by the Copyright Act....

  16. Parametric Design and Rapid Prototyping of Installation Box for Vehicle Terminal PCB

    Directory of Open Access Journals (Sweden)

    Wang Xingxing

    2016-01-01

    Full Text Available Installation box for vehicle terminal PCB (Printed Circuit Board was took as research object, which is encountered in the process of project developing. Vehicle terminal PCB in actual development process was set as an example, point cloud data were acquired by three coordinate measuring method; Imageware software was used to reconstruct the vehicle terminal PCB model, basic size parameters of vehicle terminal PCB can be got and then design parameters of installation box for vehicle terminal PCB can be determined. Design of the installation box for vehicle terminal PCB was completed based on Solidworks software, then 3D modeling and 2D drawing of installation box for vehicle terminal PCB was gained. Up Plus 2 rapid prototype machine was used to manufacture installation box for vehicle terminal PCB rapidly based on 3D printing technology, then prototype of installation box for vehicle terminal PCB was obtained. It is of certain engineering significant for single (small amount manufacturing of installation box for general PCB.

  17. Glove boxes and similar containments

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    According to the present invention a glove box or similar containment is provided with an exhaust system including a vortex amplifier venting into the system, the vortex amplifier also having its main inlet in fluid flow connection with the containment and a control inlet in fluid flow connection with the atmosphere outside the containment. (U.S.)

  18. The Bird Box Survey Project

    Science.gov (United States)

    Willis, Patrick

    2014-01-01

    When high school students are asked what's the best part of science class, many will say it's the field trips. Students enjoy engaging in authentic, community-based science outside the classroom. To capitalize on this, Patrick Willis created the Bird Box Survey Project for his introductory field biology class. The project takes students…

  19. On the Dirichlet's Box Principle

    Science.gov (United States)

    Poon, Kin-Keung; Shiu, Wai-Chee

    2008-01-01

    In this note, we will focus on several applications on the Dirichlet's box principle in Discrete Mathematics lesson and number theory lesson. In addition, the main result is an innovative game on a triangular board developed by the authors. The game has been used in teaching and learning mathematics in Discrete Mathematics and some high schools in…

  20. The CCP14 project: software for x-ray diffraction analysts

    International Nuclear Information System (INIS)

    Cranswick, L.

    2002-01-01

    Full text: The primary role of the UK EPSRC funded Collaborative Computational Project No 14 for Single Crystal and Powder Diffraction (CCP14) is to provide freely available crystallographic software to academics and students. While the CCP14 routinely concentrates on crystallographic applications (crystal structure solution and structure refinement), there is still a variety of software useful and freely available to X-ray analysts. As it is routinely important for X-ray analysts to keep up to date with effective new methods and time saving improvements, this presentation will concentrate on techniques relevant to most X-ray analysts - from data conversion to unit cell refinement to quantitative analysis and some structure refinement tools. Emphasis will also be put on the fact that crystallographic and powder diffraction programs are best not used as a black box. While point and click software tools are available, it can be very important to understand the theory behind what they are doing. Mentioned software can be downloaded via the CCP14 website in the UK (www.ccp14.ac.uk/mirror/), with full regional mirrors in the USA, Canada and Australia. Copyright (2002) Australian X-ray Analytical Association Inc

  1. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  2. Black-hole universe: time evolution.

    Science.gov (United States)

    Yoo, Chul-Moon; Okawa, Hirotada; Nakao, Ken-ichi

    2013-10-18

    Time evolution of a black hole lattice toy model universe is simulated. The vacuum Einstein equations in a cubic box with a black hole at the origin are numerically solved with periodic boundary conditions on all pairs of faces opposite to each other. Defining effective scale factors by using the area of a surface and the length of an edge of the cubic box, we compare them with that in the Einstein-de Sitter universe. It is found that the behavior of the effective scale factors is well approximated by that in the Einstein-de Sitter universe. In our model, if the box size is sufficiently larger than the horizon radius, local inhomogeneities do not significantly affect the global expansion law of the Universe even though the inhomogeneity is extremely nonlinear.

  3. Evaluation of bike boxes at signalized intersections.

    Science.gov (United States)

    Dill, Jennifer; Monsere, Christopher M; McNeil, Nathan

    2012-01-01

    This paper presents a before-after study of bike boxes at 10 signalized intersections in Portland, Oregon. The bike boxes, also known as advanced stop lines or advanced stop boxes, were installed to increase visibility of cyclists and reduce conflicts between motor vehicles and cyclists, particularly in potential "right-hook" situations. Before and after video were analyzed for seven intersections with green bike boxes, three intersections with uncolored bike boxes, and two control intersections. User perceptions were measured through surveys of cyclists passing through five of the bike box intersections and of motorists working downtown, where the boxes were concentrated. Both the observations and survey of motorists found a high rate of compliance and understanding of the markings. Overall, 73% of the stopping motor vehicles did not encroach at all into the bike box. Both motor vehicle and bicycle encroachment in the pedestrian crosswalk fell significantly at the bike box locations compared to the control intersections. The bike boxes had mixed effects on the motorists' encroachment in the bicycle lane. The number of observed conflicts at the bike box locations decreased, while the total number of cyclists and motor vehicles turning right increased. Negative-binomial models based upon the data predict fewer conflicts with the boxes, particularly as right-turning motor vehicle volumes increase. Observations of yielding behavior at two bike box and one control intersection found an improvement in motorists yielding to cyclists at the bike box locations. Differences in the traffic volumes and location contexts make firm conclusions about the effects of green coloring of the boxes difficult. Higher shares of surveyed motorists felt that the bike boxes made driving safer rather than more dangerous, even when the sample was narrowed to respondents who were not also cyclists. Over three-quarters of the surveyed cyclists thought that the boxes made the intersection safer

  4. ePMV embeds molecular modeling into professional animation software environments.

    Science.gov (United States)

    Johnson, Graham T; Autin, Ludovic; Goodsell, David S; Sanner, Michel F; Olson, Arthur J

    2011-03-09

    Increasingly complex research has made it more difficult to prepare data for publication, education, and outreach. Many scientists must also wade through black-box code to interface computational algorithms from diverse sources to supplement their bench work. To reduce these barriers we have developed an open-source plug-in, embedded Python Molecular Viewer (ePMV), that runs molecular modeling software directly inside of professional 3D animation applications (hosts) to provide simultaneous access to the capabilities of these newly connected systems. Uniting host and scientific algorithms into a single interface allows users from varied backgrounds to assemble professional quality visuals and to perform computational experiments with relative ease. By enabling easy exchange of algorithms, ePMV can facilitate interdisciplinary research, smooth communication between broadly diverse specialties, and provide a common platform to frame and visualize the increasingly detailed intersection(s) of cellular and molecular biology. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. On testing of functionally equivalent components of fault-tolerant software

    Science.gov (United States)

    Vouk, Mladen A.; Helsabeck, Michael L.; Tai, Kuo-Chung; Mcallister, David F.

    1986-01-01

    Six functionally equivalent programs were tested with specification based random and extremal/special value (ESV) test cases. Statement and branch coverage were used to measure and compare the attained testing effectiveness. It was observed that both measures reached a nearly steady state value after 25 to 75 random test cases. Coverage saturation curves appear to follow an exponential growth model. However, the steady state values for branch coverage of different components, but the same input cases, differed by as much as 22 percent. The effect is the result of the differences in the detailed structure of the components. Improvement in coverage provided by the random test data, after the ESV cases were executed, was only about 1 percent. Results indicate that extensive random testing can be a process of diminishing returns, and that in the FTS context functional ('black box') testing can provide a very uneven execution coverage of the functionally equivalent software, and therefore should be supplemented by structure based testing.

  6. An Evaluation of Output Quality of Machine Translation (Padideh Software vs. Google Translate

    Directory of Open Access Journals (Sweden)

    Haniyeh Sadeghi Azer

    2015-08-01

    Full Text Available This study aims to evaluate the translation quality of two machine translation systems in translating six different text-types, from English to Persian. The evaluation was based on criteria proposed by Van Slype (1979. The proposed model for evaluation is a black-box type, comparative and adequacy-oriented evaluation. To conduct the evaluation, a questionnaire was assigned to end-users to evaluate the outputs to examine and determine, if the machine-generated translations are intelligible and acceptable from their point of view and which one of the machine-generated translations produced by Padideh software and Google Translate is more acceptable and useful from the end-users point of view. The findings indicate that, the machine-generated translations are intelligible and acceptable in translating certain text-types, for end-users and Google Translate is more acceptable from end-users point of view. Keywords: Machine Translation, Machine Translation Evaluation, Translation Quality

  7. 77 FR 20808 - Black Bear Hydro Partners, LLC; Notice of Application Accepted for Filing, Ready for...

    Science.gov (United States)

    2012-04-06

    ... March 14, 2012. d. Applicant: Black Bear Hydro Partners, LLC. e. Name of Projects: Orono Project 2710.... 791a-825r. h. Applicant Contact: Mr. Scott D. Hall, Black Bear Hydro Partners, LLC, P.O. Box 276... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project Nos. 2710-057; 2712-074] Black...

  8. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  9. The Heuristic Interpretation of Box Plots

    Science.gov (United States)

    Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

  10. Software Reviews.

    Science.gov (United States)

    McGrath, Diane

    1990-01-01

    Reviews two programs: (1) "The Weather Machine" on understanding weather and weather forecasting and (2) "The Mystery of the Hotel Victoria" on problem solving in mathematics. Presents the descriptions, advantages, and weaknesses of the software. (YP)

  11. Software Reviews.

    Science.gov (United States)

    Miller, Anne, Ed.; Radziemski, Cathy, Ed.

    1988-01-01

    Three pieces of computer software are described and reviewed: HyperCard, to build and use varied applications; Iggy's Gnees, for problem solving with shapes in grades kindergarten-two; and Algebra Shop, for practicing skills and problem solving. (MNS)

  12. Software Reviews.

    Science.gov (United States)

    Slatta, Richard W. And Others

    1987-01-01

    Describes a variety of computer software. Subjects reviewed include history simulations and wordprocessing programs. Some of the eleven packages reviewed are Thog, North Utilities, HBJ Writer, Textra, Pro-cite, and Simulation Construction Kit. (BSR)

  13. Software Reviews.

    Science.gov (United States)

    Wulfson, Stephen, Ed.

    1990-01-01

    Reviewed are six computer software packages including "Lunar Greenhouse,""Dyno-Quest,""How Weather Works,""Animal Trackers,""Personal Science Laboratory," and "The Skeletal and Muscular Systems." Availability, functional, and hardware requirements are discussed. (CW)

  14. Software Reviews.

    Science.gov (United States)

    Dwyer, Donna; And Others

    1989-01-01

    Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

  15. Water box for steam generator

    International Nuclear Information System (INIS)

    Lecomte, Robert; Viaud, Michel.

    1975-01-01

    This invention relates to a water box for connecting an assembly composed of a vertical steam generator and a vertical pump to the vessel of the nuclear reactor, the assembly forming the primary cooling system of a pressurised water reactor. This invention makes it easy to dismantle the pump on the water box without significant loss of water in the primary cooling system of the reactor and particularly without it being necessary to drain the water contained in the steam generator beforehand. It makes it possible to shorten the time required for dismantling the primary pump in order to service or repair it and makes dismantling safer in that the dismantling does not involve draining the steam generator and therefore the critical storage of a large amount of cooling water that has been in contact with the fuel assemblies of the nuclear reactor core [fr

  16. Personal Learning Environments in Black and White

    OpenAIRE

    Kalz, Marco

    2010-01-01

    Kalz, M. (2010, 22 January). Personal Learning Environments in Black and White. Presentation provided during the workshop "Informal Learning and the use of social software in veterinary medicine" of the Noviceproject (http://www.noviceproject.eu), Utrecht, The Netherlands.

  17. Autoantibodies to box A of high mobility group box 1 in systemic lupus erythematosus

    NARCIS (Netherlands)

    Schaper, F.; de Leeuw, K.; Horst, G.; Maas, F.; Bootsma, H.; Heeringa, P.; Limburg, P. C.; Westra, J.

    Autoantibodies to nuclear structures are a hallmark of systemic lupus erythematosus (SLE), including autoantibodies to nuclear protein high mobility group box 1 (HMGB1). HMGB1 consists of three separate domains: box A, box B and an acidic tail. Recombinant box A acts as a competitive antagonist for

  18. Autoantibodies to box A of high mobility group box 1 in systemic lupus erythematosus

    NARCIS (Netherlands)

    Schaper, F.; Leeuw, K. de; Horst, G. ter; Maas, F.; Bootsma, H.; Heeringa, P.; Limburg, P.C.; Westra, J.

    2017-01-01

    Autoantibodies to nuclear structures are a hallmark of systemic lupus erythematosus (SLE), including autoantibodies to nuclear protein high mobility group box 1 (HMGB1). HMGB1 consists of three separate domains: box A, box B and an acidic tail. Recombinant box A acts as a competitive antagonist for

  19. Box-shaped halophilic bacteria.

    OpenAIRE

    Javor, B; Requadt, C; Stoeckenius, W

    1982-01-01

    Three morphologically similar strains of halophilic, box-shaped procaryotes have been isolated from brines collected in the Sinai, Baja California (Mexico), and southern California (United States). Although the isolates in their morphology resemble Walsby's square bacteria, which are a dominant morphological type in the Red Sea and Baja California brines, they are probably not identical to them. The cells show the general characteristics of extreme halophiles and archaebacteria. They contain ...

  20. Software Innovation

    DEFF Research Database (Denmark)

    Rose, Jeremy

      Innovation is the forgotten key to modern systems development - the element that defines the enterprising engineer, the thriving software firm and the cutting edge software application.  Traditional forms of technical education pay little attention to creativity - often encouraging overly ratio...... out the new field of software innovation. It organizes the existing scientific research into eight simple heuristics - guiding principles for organizing a system developer's work-life so that it focuses on innovation.......  Innovation is the forgotten key to modern systems development - the element that defines the enterprising engineer, the thriving software firm and the cutting edge software application.  Traditional forms of technical education pay little attention to creativity - often encouraging overly...... rationalistic ways of thinking which stifle the ability to innovate. Professional software developers are often drowned in commercial drudgery and overwhelmed by work pressure and deadlines. The topic that will both ensure success in the market and revitalize their work lives is never addressed. This book sets...

  1. The Planck-LFI Radiometer Electronics Box Assembly

    International Nuclear Information System (INIS)

    Herreros, J M; Gomez, M F; Rebolo, R; Chulani, H; Rubino-Martin, J A; Hildebrandt, S R; Bersanelli, M; Franceschet, C; Butler, R C; Miccolis, M; Pena, A; Pereira, M; Torrero, F; Lopez, M; Alcala, C

    2009-01-01

    The Radiometer Electronics Box Assembly (REBA) is the control and data processing on board computer of the Low Frequency Instrument (LFI) of the Planck mission (ESA). The REBA was designed and built incorporating state of the art processors, communication interfaces and real time operating system software in order to meet the scientific performance of the LFI. We present a technical summary of the REBA, including a physical, functional, electrical, mechanical and thermal description. Aspects of the design and development, the assembly, the integration and the verification of the equipment are provided. A brief description of the LFI on board software is given including the Low-Level Software and the main functionalities and architecture of the Application Software. The compressor module, which has been developed as an independent product, later integrated in the application, is also described in this paper. Two identical engineering models EM and AVM, the engineering qualification model EQM, the flight model FM and flight spare have been manufactured and tested. Low-level and Application software have been developed. Verification activities demonstrated that the REBA hardware and software fulfil all the specifications and perform as required for flight operation.

  2. Speech to Text Software Evaluation Report

    CERN Document Server

    Martins Santo, Ana Luisa

    2017-01-01

    This document compares out-of-box performance of three commercially available speech recognition software: Vocapia VoxSigma TM , Google Cloud Speech, and Lime- craft Transcriber. It is defined a set of evaluation criteria and test methods for speech recognition softwares. The evaluation of these softwares in noisy environments are also included for the testing purposes. Recognition accuracy was compared using noisy environments and languages. Testing in ”ideal” non-noisy environment of a quiet room has been also performed for comparison.

  3. Black Culture

    Directory of Open Access Journals (Sweden)

    Angela Khristin Brown

    2013-07-01

    Full Text Available The migration of blacks in North America through slavery became united.  The population of blacks past downs a tradition of artist through art to native born citizens. The art tradition involved telling stories to each generation in black families. The black culture elevated by tradition created hope to determine their personal freedom to escape from poverty of enslavement and to establish a way of life through tradition. A way of personal freedoms was through getting a good education that lead to a better foundation and a better way of life.

  4. Software reengineering

    Science.gov (United States)

    Fridge, Ernest M., III

    1991-01-01

    Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

  5. Broadband set-top box using MAP-CA processor

    Science.gov (United States)

    Bush, John E.; Lee, Woobin; Basoglu, Chris

    2001-12-01

    Advances in broadband access are expected to exert a profound impact in our everyday life. It will be the key to the digital convergence of communication, computer and consumer equipment. A common thread that facilitates this convergence comprises digital media and Internet. To address this market, Equator Technologies, Inc., is developing the Dolphin broadband set-top box reference platform using its MAP-CA Broadband Signal ProcessorT chip. The Dolphin reference platform is a universal media platform for display and presentation of digital contents on end-user entertainment systems. The objective of the Dolphin reference platform is to provide a complete set-top box system based on the MAP-CA processor. It includes all the necessary hardware and software components for the emerging broadcast and the broadband digital media market based on IP protocols. Such reference design requires a broadband Internet access and high-performance digital signal processing. By using the MAP-CA processor, the Dolphin reference platform is completely programmable, allowing various codecs to be implemented in software, such as MPEG-2, MPEG-4, H.263 and proprietary codecs. The software implementation also enables field upgrades to keep pace with evolving technology and industry demands.

  6. GREEN SUPERCOMPUTING IN A DESKTOP BOX

    Energy Technology Data Exchange (ETDEWEB)

    HSU, CHUNG-HSING [Los Alamos National Laboratory; FENG, WU-CHUN [NON LANL; CHING, AVERY [NON LANL

    2007-01-17

    The computer workstation, introduced by Sun Microsystems in 1982, was the tool of choice for scientists and engineers as an interactive computing environment for the development of scientific codes. However, by the mid-1990s, the performance of workstations began to lag behind high-end commodity PCs. This, coupled with the disappearance of BSD-based operating systems in workstations and the emergence of Linux as an open-source operating system for PCs, arguably led to the demise of the workstation as we knew it. Around the same time, computational scientists started to leverage PCs running Linux to create a commodity-based (Beowulf) cluster that provided dedicated computer cycles, i.e., supercomputing for the rest of us, as a cost-effective alternative to large supercomputers, i.e., supercomputing for the few. However, as the cluster movement has matured, with respect to cluster hardware and open-source software, these clusters have become much more like their large-scale supercomputing brethren - a shared (and power-hungry) datacenter resource that must reside in a machine-cooled room in order to operate properly. Consequently, the above observations, when coupled with the ever-increasing performance gap between the PC and cluster supercomputer, provide the motivation for a 'green' desktop supercomputer - a turnkey solution that provides an interactive and parallel computing environment with the approximate form factor of a Sun SPARCstation 1 'pizza box' workstation. In this paper, they present the hardware and software architecture of such a solution as well as its prowess as a developmental platform for parallel codes. In short, imagine a 12-node personal desktop supercomputer that achieves 14 Gflops on Linpack but sips only 185 watts of power at load, resulting in a performance-power ratio that is over 300% better than their reference SMP platform.

  7. MIAWARE Software

    DEFF Research Database (Denmark)

    Wilkowski, Bartlomiej; Pereira, Oscar N. M.; Dias, Paulo

    2008-01-01

    This article presents MIAWARE, a software for Medical Image Analysis With Automated Reporting Engine, which was designed and developed for doctor/radiologist assistance. It allows to analyze an image stack from computed axial tomography scan of lungs (thorax) and, at the same time, to mark all...... is automatically generated. Furthermore, MIAWARE software is accompanied with an intelligent search engine for medical reports, based on the relations between parts of the lungs. A logical structure of the lungs is introduced to the search algorithm through the specially developed ontology. As a result...... pathologies on images and report their characteristics. The reporting process is normalized - radiologists cannot describe pathological changes with their own words, but can only use some terms from a specific vocabulary set provided by the software. Consequently, a normalized radiological report...

  8. Boxes of Model Building and Visualization.

    Science.gov (United States)

    Turk, Dušan

    2017-01-01

    Macromolecular crystallography and electron microscopy (single-particle and in situ tomography) are merging into a single approach used by the two coalescing scientific communities. The merger is a consequence of technical developments that enabled determination of atomic structures of macromolecules by electron microscopy. Technological progress in experimental methods of macromolecular structure determination, computer hardware, and software changed and continues to change the nature of model building and visualization of molecular structures. However, the increase in automation and availability of structure validation are reducing interactive manual model building to fiddling with details. On the other hand, interactive modeling tools increasingly rely on search and complex energy calculation procedures, which make manually driven changes in geometry increasingly powerful and at the same time less demanding. Thus, the need for accurate manual positioning of a model is decreasing. The user's push only needs to be sufficient to bring the model within the increasing convergence radius of the computing tools. It seems that we can now better than ever determine an average single structure. The tools work better, requirements for engagement of human brain are lowered, and the frontier of intellectual and scientific challenges has moved on. The quest for resolution of new challenges requires out-of-the-box thinking. A few issues such as model bias and correctness of structure, ongoing developments in parameters defining geometric restraints, limitations of the ideal average single structure, and limitations of Bragg spot data are discussed here, together with the challenges that lie ahead.

  9. Software engineering

    CERN Document Server

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  10. Black Cohosh

    Science.gov (United States)

    ... who have had hormone-sensitive conditions such as breast cancer or for pregnant women or nursing mothers. Black cohosh should not be confused with blue cohosh (Caulophyllum thalictroides) , which has different effects and may not be safe. Black cohosh has ...

  11. Solving the software protection problem with intrinsic personal physical unclonable functions.

    Energy Technology Data Exchange (ETDEWEB)

    Nithyanand, Rishab (Stony Brook University, Stony Brook, NY); Sion, Radu (Stony Brook University, Stony Brook, NY)

    2011-09-01

    Physical Unclonable Functions (PUFs) or Physical One Way Functions (P-OWFs) are physical systems whose responses to input stimuli (i.e., challenges) are easy to measure (within reasonable error bounds) but hard to clone. The unclonability property comes from the accepted hardness of replicating the multitude of characteristics introduced during the manufacturing process. This makes PUFs useful for solving problems such as device authentication, software protection, licensing, and certified execution. In this paper, we focus on the effectiveness of PUFs for software protection in offline settings. We first argue that traditional (black-box) PUFs are not useful for protecting software in settings where communication with a vendor's server or third party network device is infeasible or impossible. Instead, we argue that Intrinsic PUFs are needed to solve the above mentioned problems because they are intrinsically involved in processing the information that is to be protected. Finally, we describe how sources of randomness in any computing device can be used for creating intrinsic-personal-PUFs (IP-PUF) and present experimental results in using standard off-the-shelf computers as IP-PUFs.

  12. Voronoi Diagrams Without Bounding Boxes

    Science.gov (United States)

    Sang, E. T. K.

    2015-10-01

    We present a technique for presenting geographic data in Voronoi diagrams without having to specify a bounding box. The method restricts Voronoi cells to points within a user-defined distance of the data points. The mathematical foundation of the approach is presented as well. The cell clipping method is particularly useful for presenting geographic data that is spread in an irregular way over a map, as for example the Dutch dialect data displayed in Figure 2. The automatic generation of reasonable cell boundaries also makes redundant a frequently used solution to this problem that requires data owners to specify region boundaries, as in Goebl (2010) and Nerbonne et al (2011).

  13. Hot cells and glove boxes

    International Nuclear Information System (INIS)

    1992-05-01

    Hot cells and glove boxes have been designed and developed to conduct operations involving radioactive materials which require some degree of manipulation. Glove boxes were developed to manipulate alpha emitters. As their name indicates, these are airtight boxes usually constructed with transparent, see-through walls. Operations are conducted inside by means of gloves or mechanic manipulators. These boxes are also used for biological-protection purposes, e.g., manipulation of viruses or similar applications. Basically, hot cells are used for: - radioisotope fractionning and purification; - post-irradiation studies, and - tests or sundry operations involving radiological or biological protection. These shielded cells are constructed on a supporting structure made out of steel and antimonious Pb bricks with airtight inner enclosures and lead-glass windows. Operations are conducted by means of remote telemanipulators. Airtight enclosures are made out of a stainless steel structure forming an Omega-shaped profile on the openings which are fitted with acrylic panels. Tight-proof insulation is achieved by means of appropriate joints placed between the structure and acrylic plates. Electric passage ducts for fluids or electrical conductors also preserve absolute hermeticity. The partition enclosures are placed on supporting tables made out of normalized sections and steel plates. If needed, enclosures, may be removed and replaced by others. For materials-transference purposes, these cells are provided with shielded doors, air-tight doors and a connecting duct between the tight-proof enclosures with a guillotine-type gate and a pneumatic remote-control coupling/uncoupling system. Each work post is provided with an operations console and a control cabinet with depression indicating manometers, input inlet valves and electrical interconnecting boards. A desk-type console centralizes operation commands which will take place inside the enclosures. Appropriate lighting has been

  14. Geochemical Evaluation of black shales from the deposit Nizna Slana, lower paleozoic, Western Carpatians

    International Nuclear Information System (INIS)

    Turanova, L.; Turan, J.; Khun, M.

    1996-01-01

    Black shales from the deposit Nizna Slana and its immediate surroundings can be divided into black shales ss, carbonate black shales and siliceous black shales on the basis of chemical composition. Basic statistical characteristics of main and trace elements, as well as content of organic carbon, are evaluated and compared in this paper, either numerically, or graphically using the box-and whisker diagrams (median, 25 % percentile, 75 % percentile, total extent). (authors)

  15. Software Reviews.

    Science.gov (United States)

    Science Software Quarterly, 1984

    1984-01-01

    Provides extensive reviews of computer software, examining documentation, ease of use, performance, error handling, special features, and system requirements. Includes statistics, problem-solving (TK Solver), label printing, database management, experimental psychology, Encyclopedia Britannica biology, and DNA-sequencing programs. A program for…

  16. Educational Software.

    Science.gov (United States)

    Northwest Regional Educational Lab., Portland, OR.

    The third session of IT@EDU98 consisted of five papers on educational software and was chaired by Tran Van Hao (University of Education, Ho Chi Minh City, Vietnam). "Courseware Engineering" (Nguyen Thanh Son, Ngo Ngoc Bao Tran, Quan Thanh Tho, Nguyen Hong Lam) briefly describes the use of courseware. "Machine Discovery Theorems in Geometry: A…

  17. Box graphs and singular fibers

    International Nuclear Information System (INIS)

    Hayashi, Hirotaka; Lawrie, Craig; Morrison, David R.; Schäfer-Nameki, Sakura

    2014-01-01

    We determine the higher codimension fibers of elliptically fibered Calabi-Yau fourfolds with section by studying the three-dimensional N=2 supersymmetric gauge theory with matter which describes the low energy effective theory of M-theory compactified on the associated Weierstrass model, a singular model of the fourfold. Each phase of the Coulomb branch of this theory corresponds to a particular resolution of the Weierstrass model, and we show that these have a concise description in terms of decorated box graphs based on the representation graph of the matter multiplets, or alternatively by a class of convex paths on said graph. Transitions between phases have a simple interpretation as “flopping' of the path, and in the geometry correspond to actual flop transitions. This description of the phases enables us to enumerate and determine the entire network between them, with various matter representations for all reductive Lie groups. Furthermore, we observe that each network of phases carries the structure of a (quasi-)minuscule representation of a specific Lie algebra. Interpreted from a geometric point of view, this analysis determines the generators of the cone of effective curves as well as the network of flop transitions between crepant resolutions of singular elliptic Calabi-Yau fourfolds. From the box graphs we determine all fiber types in codimensions two and three, and we find new, non-Kodaira, fiber types for E 6 , E 7 and E 8

  18. Lessons from the light-cone box

    CERN Document Server

    Leibbrandt, G

    2000-01-01

    Working in the noncovariant light-cone gauge, we discuss the explicit computation of the 1PI four-point function ("box diagram") in Yang- Mills theory. The complete box diagram which consists of 16 box subdiagrams, 8 lynx subdiagrams and 4 fish subdiagrams, yields both local and nonlocal UV divergent terms. The nonlocal terms are consistent with gauge symmetry and correspond to a nonlocal renormalization of the wave function. (14 refs).

  19. The three-box paradox revisited

    International Nuclear Information System (INIS)

    Ravon, Tamar; Vaidman, Lev

    2007-01-01

    The classical three-box paradox of Kirkpatrick (2003 J. Phys. A: Math. Gen. 36 4891) is compared to the original quantum three-box paradox of Aharonov and Vaidman (1991 J. Phys. A: Math. Gen. 24 2315). It is argued that the quantum three-box experiment is a 'quantum paradox' in the sense that it is an example of a classical task which cannot be accomplished using classical means, but can be accomplished using quantum devices. It is shown that Kirkpatrick's card game is analogous to a different game with a particle in three boxes which does not contain paradoxical features

  20. Software preservation

    Directory of Open Access Journals (Sweden)

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  1. IMPROVED, FAVORABLE FOR ENVIRONMENT POLYURETHANE COLD-BOX-PROCESS (COLD BOX «HUTTENES-ALBERTUS» .

    Directory of Open Access Journals (Sweden)

    A. Sergini

    2005-01-01

    Full Text Available The results of the laboratory and industrial investigations, the purpose of which is improvement of the classical Cold-box-process, i.e. the process of the slugs hardening in cold boxes, are presented.

  2. Establishing software quality assurance

    International Nuclear Information System (INIS)

    Malsbury, J.

    1983-01-01

    This paper is concerned with four questions about establishing software QA: What is software QA. Why have software QA. What is the role of software QA. What is necessary to ensure the success of software QA

  3. Black Tea

    Science.gov (United States)

    ... leaves of the same plant, has some different properties. Black tea is used for improving mental alertness ... that slow blood clotting include aspirin, clopidogrel (Plavix), diclofenac (Voltaren, Cataflam, others), ibuprofen (Advil, Motrin, others), naproxen ( ...

  4. VORONOI DIAGRAMS WITHOUT BOUNDING BOXES

    Directory of Open Access Journals (Sweden)

    E. T. K. Sang

    2015-10-01

    Full Text Available We present a technique for presenting geographic data in Voronoi diagrams without having to specify a bounding box. The method restricts Voronoi cells to points within a user-defined distance of the data points. The mathematical foundation of the approach is presented as well. The cell clipping method is particularly useful for presenting geographic data that is spread in an irregular way over a map, as for example the Dutch dialect data displayed in Figure 2. The automatic generation of reasonable cell boundaries also makes redundant a frequently used solution to this problem that requires data owners to specify region boundaries, as in Goebl (2010 and Nerbonne et al (2011.

  5. Technology as the Crayon Box.

    Science.gov (United States)

    Garcia, Lilia

    2000-01-01

    While arts facilities should be equipped with computers, color scanners, MIDI (Musical Instrument Digital Interface) labs, connective video cameras, and appropriate software, music rooms still need pianos and visual art rooms need traditional art supplies. Dade County (Florida) Schools's pilot teacher assistance projects and arts-centered schools…

  6. Simplified method for the transverse bending analysis of twin celled concrete box girder bridges

    Science.gov (United States)

    Chithra, J.; Nagarajan, Praveen; S, Sajith A.

    2018-03-01

    Box girder bridges are one of the best options for bridges with span more than 25 m. For the study of these bridges, three-dimensional finite element analysis is the best suited method. However, performing three-dimensional analysis for routine design is difficult as well as time consuming. Also, software used for the three-dimensional analysis are very expensive. Hence designers resort to simplified analysis for predicting longitudinal and transverse bending moments. Among the many analytical methods used to find the transverse bending moments, SFA is the simplest and widely used in design offices. Results from simplified frame analysis can be used for the preliminary analysis of the concrete box girder bridges.From the review of literatures, it is found that majority of the work done using SFA is restricted to the analysis of single cell box girder bridges. Not much work has been done on the analysis multi-cell concrete box girder bridges. In this present study, a double cell concrete box girder bridge is chosen. The bridge is modelled using three- dimensional finite element software and the results are then compared with the simplified frame analysis. The study mainly focuses on establishing correction factors for transverse bending moment values obtained from SFA.

  7. Electrical requirements for unshielded glove boxes

    International Nuclear Information System (INIS)

    1978-02-01

    The specification relates to the general design and installation of electrical services required in unshielded glove boxes in which atmospheres of air, argon or nitrogen etc. may exist either temporarily or permanently. The specification does not apply to electrical services for glove boxes with flammable explosive atmospheres. (author)

  8. A boxing procedure for corrected cast impressions.

    Science.gov (United States)

    Ansari, I H

    1994-01-01

    This new method for boxing a corrected cast impression for a distal extension removable partial denture improves the procedure. The framework with its impression is seated on the remainder of the cast after anatomic ridges have been removed and luted with sticky wax, and the assembly is inserted into a previously formed thermoplastic box and poured to make a new corrected cast.

  9. Learning Photogrammetry with Interactive Software Tool PhoX

    Directory of Open Access Journals (Sweden)

    T. Luhmann

    2016-06-01

    Full Text Available Photogrammetry is a complex topic in high-level university teaching, especially in the fields of geodesy, geoinformatics and metrology where high quality results are demanded. In addition, more and more black-box solutions for 3D image processing and point cloud generation are available that generate nice results easily, e.g. by structure-from-motion approaches. Within this context, the classical approach of teaching photogrammetry (e.g. focusing on aerial stereophotogrammetry has to be reformed in order to educate students and professionals with new topics and provide them with more information behind the scene. Since around 20 years photogrammetry courses at the Jade University of Applied Sciences in Oldenburg, Germany, include the use of digital photogrammetry software that provide individual exercises, deep analysis of calculation results and a wide range of visualization tools for almost all standard tasks in photogrammetry. During the last years the software package PhoX has been developed that is part of a new didactic concept in photogrammetry and related subjects. It also serves as analysis tool in recent research projects. PhoX consists of a project-oriented data structure for images, image data, measured points and features and 3D objects. It allows for almost all basic photogrammetric measurement tools, image processing, calculation methods, graphical analysis functions, simulations and much more. Students use the program in order to conduct predefined exercises where they have the opportunity to analyse results in a high level of detail. This includes the analysis of statistical quality parameters but also the meaning of transformation parameters, rotation matrices, calibration and orientation data. As one specific advantage, PhoX allows for the interactive modification of single parameters and the direct view of the resulting effect in image or object space.

  10. 49 CFR 178.515 - Standards for reconstituted wood boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for reconstituted wood boxes. 178.515... wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements for reconstituted wood boxes are as follows: (1) The walls of boxes must be made of water...

  11. North American box turtles: A natural history

    Science.gov (United States)

    Dodd, C. Kenneth

    2002-01-01

    Once a familiar backyard visitor in many parts of the United States and Mexico, the box turtle is losing the battle against extinction. In North American Box Turtles, C. Kenneth Dodd, Jr., has written the first book-length natural history of the twelve species and subspecies of this endangered animal. This volume includes comprehensive information on the species’ evolution, behavior, courtship and reproduction, habitat use, diet, population structure, systematics, and disease. Special features include color photos of all species, subspecies, and their habitats; a simple identification guide to both living and fossil species; and a summary of information on fossil Terrapene and Native uses of box turtles. End-of-chapter sections highlight future research directions, including the need for long-term monitoring and observation of box turtles within their natural habitat and conservation applications. A glossary and a bibliography of literature on box turtles accompany the text.

  12. Probe and Sensors Development for Level Measurement of Fats, Oils and Grease in Grease Boxes

    Directory of Open Access Journals (Sweden)

    José Faria

    2016-09-01

    Full Text Available The wide spread of food outlets has become an environmental and sanitation infrastructure problem, due to Fats, Oils and Grease (FOG. A grease box is used at the industrials facilities to collect the FOG, in a specific time window, while its quality is good for recycling (e.g., biodiesel and it is economically valuable. After this period, it will be disposed at a cost. For the proper management of the grease boxes, it is necessary to know the quantity of FOG inside the boxes, which is a major problem, as the boxes are sealed and permanently filled with water. The lack of homogeneity of the FOG renders it not detectable by current probes for level detection in liquids. In this article, the design, development and testing of a set of probes for FOG level measurement, based on the principles used in sensors for the detection of liquids inside containers, is described. The most suitable probe, based on the capacitance principle, together with the necessary hardware and software modules for data acquisition and transmission, was developed and tested. After the development phase, the probe was integrated on a metropolitan system for FOG collection and grease box management in partnership with a grease box management company.

  13. Software system safety

    Science.gov (United States)

    Uber, James G.

    1988-01-01

    Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

  14. Analisis Penyerapan Energi Crash Box Pola Origami pada Pengujian Frontal Impact Posisi Angular Frontal

    Directory of Open Access Journals (Sweden)

    Redi Bintarto

    2017-05-01

    Full Text Available In the car, the body structure is designed in such a way so as to transfer and absorb energy. This serves to minimize the result of this accident related to kinetic energy. This needs a system to absorb the kinetic energy maximally, so as a result of a frontal collision events that can be reduced optimally and kinetic energy can be absorbed by a front body structure. Devices used for absorbing kinetic energy in the car is usually called a crash box, which is located between the main structure and bumper. Crash Box generally tubular thin shaped. It has been a lot of research about the crash box. In this study using crash box origami patterns and using methods taguchi orthogonal array L9 (34. AA7003-T7 aluminum material modeled as bilinear isotropic hardening, the loading method is Frontal Impact Frontal Angular Position with impact angles of 5, 15 and 30 degree by using the finite element software simulation methods. The simulation results showed that the crash box in the lowest possible energy absorption were happened at crash box with 5 degree, with 683 153 Joule energy absorbsion. The highest result was happened to crash box number 5 with the results of 3,140.778 Joule. Lowest absorption on impact of 15 degree and 30 degree were happened to crash box number 1 and number 3 with a value of 245 685 Joule and 174 845 Joule, while the highest absorption at mumber 3 with each value 1,708.521 Joule and 1,750.872 Joule.

  15. Modeling Lolium perenne L. roots in the presence of empirical black holes

    Science.gov (United States)

    Plant root models are designed for understanding structural or functional aspects of root systems. When a process is not thoroughly understood, a black box object is used. However, when a process exists but empirical data do not indicate its existence, you have a black hole. The object of this re...

  16. Increasing the realism of a laparoscopic box trainer: a simple, inexpensive method.

    Science.gov (United States)

    Hull, Louise; Kassab, Eva; Arora, Sonal; Kneebone, Roger

    2010-01-01

    Simulation-based training in medical education is increasing. Realism is an integral element of creating an engaging, effective training environment. Although physical trainers offer a low-cost alternative to expensive virtual reality (VR) simulators, many lack in realism. The aim of this research was to enhance the realism of a laparoscopic box trainer by using a simple, inexpensive method. Digital images of the abdominal cavity were captured from a VR simulator. The images were printed onto a laminated card that lined the bottom and sides of the box-trainer cavity. The standard black neoprene material that encloses the abdominal cavity was replaced with a skin-colored silicon model. The realism of the modified box trainer was assessed by surgeons, using quantitative and qualitative methodologies. Results suggest that the modified box trainer was more realistic than a standard box trainer alone. Incorporating this technique in the training of laparoscopic skills is an inexpensive means of emulating surgical reality that may enhance the engagement of the learner in simulation.

  17. ADFNE: Open source software for discrete fracture network engineering, two and three dimensional applications

    Science.gov (United States)

    Fadakar Alghalandis, Younes

    2017-05-01

    Rapidly growing topic, the discrete fracture network engineering (DFNE), has already attracted many talents from diverse disciplines in academia and industry around the world to challenge difficult problems related to mining, geothermal, civil, oil and gas, water and many other projects. Although, there are few commercial software capable of providing some useful functionalities fundamental for DFNE, their costs, closed code (black box) distributions and hence limited programmability and tractability encouraged us to respond to this rising demand with a new solution. This paper introduces an open source comprehensive software package for stochastic modeling of fracture networks in two- and three-dimension in discrete formulation. Functionalities included are geometric modeling (e.g., complex polygonal fracture faces, and utilizing directional statistics), simulations, characterizations (e.g., intersection, clustering and connectivity analyses) and applications (e.g., fluid flow). The package is completely written in Matlab scripting language. Significant efforts have been made to bring maximum flexibility to the functions in order to solve problems in both two- and three-dimensions in an easy and united way that is suitable for beginners, advanced and experienced users.

  18. A Theoretical Analysis: Physical Unclonable Functions and The Software Protection Problem

    Energy Technology Data Exchange (ETDEWEB)

    Nithyanand, Rishab [Stony Brook Univ., NY (United States); Solis, John H. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2011-09-01

    Physical Unclonable Functions (PUFs) or Physical One Way Functions (P-OWFs) are physical systems whose responses to input stimuli (i.e., challenges) are easy to measure (within reasonable error bounds) but hard to clone. This property of unclonability is due to the accepted hardness of replicating the multitude of uncontrollable manufacturing characteristics and makes PUFs useful in solving problems such as device authentication, software protection, licensing, and certified execution. In this paper, we focus on the effectiveness of PUFs for software protection and show that traditional non-computational (black-box) PUFs cannot solve the problem against real world adversaries in offline settings. Our contributions are the following: We provide two real world adversary models (weak and strong variants) and present definitions for security against the adversaries. We continue by proposing schemes secure against the weak adversary and show that no scheme is secure against a strong adversary without the use of trusted hardware. Finally, we present a protection scheme secure against strong adversaries based on trusted hardware.

  19. MADS-box gene evolution - structure and transcription patterns

    DEFF Research Database (Denmark)

    Johansen, Bo; Pedersen, Louise Buchholt; Skipper, Martin

    2002-01-01

    Mads-box genes, ABC model, Evolution, Phylogeny, Transcription patterns, Gene structure, Conserved motifs......Mads-box genes, ABC model, Evolution, Phylogeny, Transcription patterns, Gene structure, Conserved motifs...

  20. Counseling Blacks

    Science.gov (United States)

    Vontress, Clemmont E.

    1970-01-01

    Blacks have developed unique environmental perceptions, values, and attitudes, making it difficult for counselors to establish and maintain positive rapport. This article examines attitudinal ingredients posited by Carl Rogers for relevance to this problem, and suggests in-service training to help counselors and other professionals relate…

  1. Black Psyllium

    Science.gov (United States)

    ... by mouth for up to 6 weeks reduces blood sugar in people with type 2 diabetes. Cancer. Diarrhea. Irritable bowel syndrome (IBS). Other conditions. ... with the dose. Diabetes: Black psyllium can lower blood sugar levels ... with type 2 diabetes by slowing down absorption of carbohydrates. Monitor blood ...

  2. The AirQuality SenseBox

    Science.gov (United States)

    Demuth, Dustin; Nuest, Daniel; Bröring, Arne; Pebesma, Edzer

    2013-04-01

    In the past year, a group of open hardware enthusiasts and citizen scientists had large success in the crowd-funding of an open hardware-based sensor platform for air quality monitoring, called the Air Quality Egg. Via the kickstarter platform, the group was able to collect triple the amount of money than needed to fulfill their goals. Data generated by the Air Quality Egg is pushed to the data logging platform cosm.com, which makes the devices a part of the Internet of Things. The project aims at increasing the participation of citizens in the collection of data, the development of sensors, the operation of sensor stations, and, as data on cosm is publicly available, the sharing, visualization and analysis of data. Air Quality Eggs can measure NO2 and CO concentrations, as well as relative humidity and temperature. The chosen sensors are low-cost and have limited precision and accurracy. The Air Quality Egg consists of a stationary outdoor and a stationary indoor unit. Each outdoor unit will wirelessly transmit air quality measurements to the indoor unit, which forwards the data to cosm. Most recent versions of the Air Quality Egg allow a rough calibration of the gas sensors and on-the-fly conversion from raw sensor readings (impedance) to meaningful air quality data expressed in units of parts per billion. Data generated by these low-cost platforms are not intended to replace well-calibrated official monitoring stations, but rather augment the density of the total monitoring network with citizen sensors. To improve the usability of the Air Quality Egg, we present a new and more advanced concept, called the AirQuality SenseBox. We made the outdoor platform more autonomous and location-aware by adding solarpanels and rechargeable batteries as a power source. The AirQuality SenseBox knows its own position from a GPS device attached to the platform. As a mobile sensor platform, it can for instance be attached to vehicles. A low-cost and low-power wireless chipset

  3. Black hole astrophysics

    International Nuclear Information System (INIS)

    Blandford, R.D.; Thorne, K.S.

    1979-01-01

    Following an introductory section, the subject is discussed under the headings: on the character of research in black hole astrophysics; isolated holes produced by collapse of normal stars; black holes in binary systems; black holes in globular clusters; black holes in quasars and active galactic nuclei; primordial black holes; concluding remarks on the present state of research in black hole astrophysics. (U.K.)

  4. Quantum black holes

    CERN Document Server

    Calmet, Xavier; Winstanley, Elizabeth

    2014-01-01

    Written by foremost experts, this short book gives a clear description of the physics of quantum black holes. The reader will learn about quantum black holes in four and higher dimensions, primordial black holes, the production of black holes in high energy particle collisions, Hawking radiation, black holes in models of low scale quantum gravity and quantum gravitational aspects of black holes.

  5. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  6. Packing a cake into a box

    KAUST Repository

    Skopenkov, Mikhail

    2011-05-01

    Given a triangular cake and a box in the shape of its mirror image, how can the cake be cut into a minimal number of pieces so that it can be put into the box? The cake has icing, so we are not allowed to put it into the box upside down. V. G. Boltyansky asked this question in 1977 and showed that three pieces always suffice. In this paper we provide examples of cakes that cannot be cut into two pieces to be put into the box. This shows that three is the answer to Boltyansky\\'s question. We also give examples of cakes which can be cut into two pieces. © THE MATHEMATICAL ASSOCIATION OF AMERICA.

  7. Spacer for supporting fuel element boxes

    International Nuclear Information System (INIS)

    Wild, E.

    1979-01-01

    A spacer plate unit arranged externally on each side and at a predetermined level of a polygonal fuel element box for mutually supporting, with respect to one another, a plurality of the fuel element boxes forming a fuel element bundle, is formed of a first and a second spacer plate part each having the same length and the same width and being constituted of unlike first and second materials, respectively. The first and second spacer plate parts of the several spacer plate units situated at the predetermined level are arranged in an alternating continuous series when viewed in the peripheral direction of the fuel element box, so that any two spacer plate units belonging to face-to-face oriented sides of two adjoining fuel element boxes in the fuel element bundle define interfaces of unlike materials

  8. Glove boxes. Dimensions and requirements. Draft

    International Nuclear Information System (INIS)

    1985-07-01

    The standard is to be applied to work done in glove-boxes, whereby either the personnel need to be protected from the damaging effects of the materials being handled, or the materials from the effects of the environment. It is to be applied to glove-boxes in which substances are handled which emit ionising radiation (radioactive substances). This norm is not restricted to glove-boxes in which processes are carried out on a technique scale. In accordance with this norm, only those pressures and temperatures are allowed to be present in the glove-boxes, that do not offer significantly from the work areas. Alongside the stipulations of this standard regard is also always to be taken of the regulations in the radiation protection ordinance. (orig./HP) [de

  9. Cosmetic Foot Surgery: Fashion's Pandora's Box

    Science.gov (United States)

    ... A A A | Print | Share Cosmetic Foot Surgery: Fashion’s Pandora’s Box? Foot and ankle surgeons warn against ... a "face lift" and fit them into high-fashion shoes. But physician members of the American College ...

  10. ENERGY STAR Certified Set Top Boxes

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 5.1 ENERGY STAR Program Requirements for Set-top Boxes that are effective as of January...

  11. A Lithium Vapor Box Divertor Similarity Experiment

    Science.gov (United States)

    Cohen, Robert A.; Emdee, Eric D.; Goldston, Robert J.; Jaworski, Michael A.; Schwartz, Jacob A.

    2017-10-01

    A lithium vapor box divertor offers an alternate means of managing the extreme power density of divertor plasmas by leveraging gaseous lithium to volumetrically extract power. The vapor box divertor is a baffled slot with liquid lithium coated walls held at temperatures which increase toward the divertor floor. The resulting vapor pressure differential drives gaseous lithium from hotter chambers into cooler ones, where the lithium condenses and returns. A similarity experiment was devised to investigate the advantages offered by a vapor box divertor design. We discuss the design, construction, and early findings of the vapor box divertor experiment including vapor can construction, power transfer calculations, joint integrity tests, and thermocouple data logging. Heat redistribution of an incident plasma-based heat flux from a typical linear plasma device is also presented. This work supported by DOE Contract No. DE-AC02-09CH11466 and The Princeton Environmental Institute.

  12. Weld Residual Stress in Corner Boxing Joints

    OpenAIRE

    Kazuyoshi, Matsuoka; Tokuharu, Yoshii; Ship Research Institute, Ministry of Transport; Ship Research Institute, Ministry of Transport

    1998-01-01

    Fatigue damage often occurs in corner boxing welded joints because of stress concentration and residual stress. The hot spot stress approach is applicable to stress concentration. However, the number of suitable methods for estimating residual stress in welded joints is limited. The purpose of this paper is to clarify the residual stress in corner boxing joints. The method of estimating residual stresses based on the inherent stress technique is presented. Residual stress measurements are per...

  13. CSciBox: An Intelligent Assistant for Dating Ice and Sediment Cores

    Science.gov (United States)

    Finlinson, K.; Bradley, E.; White, J. W. C.; Anderson, K. A.; Marchitto, T. M., Jr.; de Vesine, L. R.; Jones, T. R.; Lindsay, C. M.; Israelsen, B.

    2015-12-01

    CSciBox is an integrated software system for the construction and evaluation of age models of paleo-environmental archives. It incorporates a number of data-processing and visualization facilities, ranging from simple interpolation to reservoir-age correction and 14C calibration via the Calib algorithm, as well as a number of firn and ice-flow models. It employs modern database technology to store paleoclimate proxy data and analysis results in an easily accessible and searchable form, and offers the user access to those data and computational elements via a modern graphical user interface (GUI). In the case of truly large data or computations, CSciBox is parallelizable across modern multi-core processors, or clusters, or even the cloud. The code is open source and freely available on github, as are one-click installers for various versions of Windows and Mac OSX. The system's architecture allows users to incorporate their own software in the form of computational components that can be built smoothly into CSciBox workflows, taking advantage of CSciBox's GUI, data importing facilities, and plotting capabilities. To date, BACON and StratiCounter have been integrated into CSciBox as embedded components. The user can manipulate and compose all of these tools and facilities as she sees fit. Alternatively, she can employ CSciBox's automated reasoning engine, which uses artificial intelligence techniques to explore the gamut of age models and cross-dating scenarios automatically. The automated reasoning engine captures the knowledge of expert geoscientists, and can output a description of its reasoning.

  14. HYDROGEN AND VOC RETENTION IN WASTE BOXES

    Energy Technology Data Exchange (ETDEWEB)

    PACE ME; MARUSICH RM

    2008-11-21

    The Hanford Waste Management Project Master Documented Safety Analysis (MDSA) (HNF-14741, 2003) identifies derived safety controls to prevent or mitigate the risks of a single-container deflagration during operations requiring moving, venting or opening transuranic (TRU)-waste containers. The issue is whether these safety controls are necessary for operations involving TRU-waste boxes that are being retrieved from burial at the Hanford Site. This paper investigates the potential for a deflagration hazard within these boxes and whether safety controls identified for drum deflagration hazards should be applied to operations involving these boxes. The study evaluates the accumulation of hydrogen and VOCs within the waste box and the transport of these gases and vapors out of the waste box. To perform the analysis, there were numerous and major assumptions made regarding the generation rate and the transport pathway dimensions and their number. Since there is little actual data with regards to these assumptions, analyses of three potential configurations were performed to obtain some indication of the bounds of the issue (the concentration of hydrogen or flammable VOCs within a waste box). A brief description of each of the three cases along with the results of the analysis is summarized.

  15. The software life cycle

    CERN Document Server

    Ince, Darrel

    1990-01-01

    The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

  16. A resting box for outdoor sampling of adult Anopheles arabiensis in rice irrigation schemes of lower Moshi, northern Tanzania

    Directory of Open Access Journals (Sweden)

    Msangi Shandala

    2009-04-01

    Full Text Available Abstract Background Malaria vector sampling is the best method for understanding the vector dynamics and infectivity; thus, disease transmission seasonality can be established. There is a need to protecting humans involved in the sampling of disease vectors during surveillance or in control programmes. In this study, human landing catch, two cow odour baited resting boxes and an unbaited resting box were evaluated as vector sampling tools in an area with a high proportion of Anopheles arabiensis, as the major malaria vector. Methods Three resting boxes were evaluated against human landing catch. Two were baited with cow odour, while the third was unbaited. The inner parts of the boxes were covered with black cloth materials. Experiments were arranged in latin-square design. Boxes were set in the evening and left undisturbed; mosquitoes were collected at 06:00 am the next morning, while human landing catch was done overnight. Results A total of 9,558 An. arabiensis mosquitoes were collected. 17.5% (N = 1668 were collected in resting box baited with cow body odour, 42.5% (N = 4060 in resting box baited with cow urine, 15.1% (N = 1444 in unbaited resting box and 24.9% (N = 2386 were collected by human landing catch technique. In analysis, the house positions had no effect on the density of mosquitoes caught (DF = 3, F = 0.753, P = 0.387; the sampling technique had significant impact on the caught mosquitoes densities (DF = 3, F 37. 944, P Conclusion Odour-baited resting boxes have shown the possibility of replacing the existing traditional method (human landing catch for sampling malaria vectors in areas with a high proportion of An. arabiensis as malaria vectors. Further evaluations of fermented urine and longevity of the urine odour still need to be investigated.

  17. Response of steel box columns in fire conditions

    Directory of Open Access Journals (Sweden)

    Mahmood Yahyai

    2017-05-01

    Full Text Available Effect of elevated temperatures on the mechanical properties of steel, brings the importance of investigating the effect of fire on the steel structures anxiously. Columns, as the main load-carrying part of a structure, can be highly vulnerable to the fire. In this study, the behavior of steel gravity columns with box cross section exposed to fire has been investigated. These kinds of columns are widely used in common steel structures design in Iran. In current study, the behavior of such columns in fire conditions is investigated through the finite element method. To perform this, the finite element model of a steel column which has been previously tested under fire condition, was prepared. Experimental loading and boundary conditions were considered in the model and was analyzed. Results were validated by experimental data and various specimens of gravity box columns were designed according to the Iran’s steel buildings code, and modeled and analyzed using Abaqus software. The effect of width to thickness ratio of column plates, the load ratio and slenderness on the ultimate strength of the column was investigated, and the endurance time was estimated under ISO 834 standard fire curve. The results revealed that an increase in width to thickness ratio and load ratio leads to reduction of endurance time and the effect of width to thickness ratio on the ultimate strength of the column decreases with temperature increase.

  18. LIGO Finds Lightest Black-Hole Binary

    Science.gov (United States)

    Kohler, Susanna

    2017-11-01

    Wednesdayevening the Laser Interferometer Gravitational-wave Observatory (LIGO) collaboration quietly mentioned that theyd found gravitational waves from yet another black-hole binary back in June. This casual announcement reveals what is so far the lightest pair of black holes weve watched merge opening the door for comparisons to the black holes weve detected by electromagnetic means.A Routine DetectionThe chirp signal of GW170608 detected by LIGO Hanford and LIGO Livingston. [LIGO collaboration 2017]After the fanfare of the previous four black-hole-binary merger announcements over the past year and a half as well as the announcement of the one neutron-star binary merger in August GW170608 marks our entry into the era in which gravitational-wave detections are officially routine.GW170608, a gravitational-wave signal from the merger of two black holes roughly a billion light-years away, was detected in June of this year. This detection occurred after wed already found gravitational waves from several black-hole binaries with the two LIGO detectors in the U.S., but before the Virgo interferometer came online in Europe and increased the joint ability of the detectors to localize sources.Mass estimates for the two components of GW170608 using different models. [LIGO collaboration 2017]Overall, GW170608 is fairly unremarkable: it was detected by both LIGO Hanford and LIGO Livingston some 7 ms apart, and the signal looks not unlike those of the previous LIGO detections. But because were still in the early days of gravitational-wave astronomy, every discovery is still remarkable in some way! GW170608 stands out as being the lightest pair of black holes weve yet to see merge, with component masses before the merger estimated at 12 and 7 times the mass of the Sun.Why Size MattersWith the exception of GW151226, the gravitational-wave signal discovered on Boxing Day last year, all of the black holes that have been discovered by LIGO/Virgo have been quite large: the masses

  19. 49 CFR 230.101 - Steam locomotive driving journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive driving journal boxes. 230.101... Locomotives and Tenders Running Gear § 230.101 Steam locomotive driving journal boxes. (a) Driving journal boxes. Driving journal boxes shall be maintained in a safe and suitable condition for service. Not more...

  20. 49 CFR 178.517 - Standards for plastic boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for plastic boxes. 178.517 Section 178... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.517 Standards for plastic boxes. (a) The following are identification codes for plastic boxes: (1) 4H1 for an expanded plastic box; and (2) 4H2 for a...

  1. Binary black holes on a budget: simulations using workstations

    International Nuclear Information System (INIS)

    Marronetti, Pedro; Tichy, Wolfgang; Bruegmann, Bernd; Gonzalez, Jose; Hannam, Mark; Husa, Sascha; Sperhake, Ulrich

    2007-01-01

    Binary black hole simulations have traditionally been computationally very expensive: current simulations are performed in supercomputers involving dozens if not hundreds of processors, thus systematic studies of the parameter space of binary black hole encounters still seem prohibitive with current technology. Here we show how the multi-layered refinement level code BAM can be used on dual processor workstations to simulate certain binary black hole systems. BAM, based on the moving punctures method, provides grid structures composed of boxes of increasing resolution near the centre of the grid. In the case of binaries, the highest resolution boxes are placed around each black hole and they track them in their orbits until the final merger when a single set of levels surrounds the black hole remnant. This is particularly useful when simulating spinning black holes since the gravitational fields gradients are larger. We present simulations of binaries with equal mass black holes with spins parallel to the binary axis and intrinsic magnitude of S/m 2 = 0.75. Our results compare favourably to those of previous simulations of this particular system. We show that the moving punctures method produces stable simulations at maximum spatial resolutions up to M/160 and for durations of up to the equivalent of 20 orbital periods

  2. ROS-TMS and Big Sensor Box: Platforms for Informationally Structured Environment

    OpenAIRE

    倉爪, 亮; ユンソク, ピョ; 辻, 徳生; 河村, 晃宏

    2017-01-01

    This paper proposes new software and hardware platforms for an informationally structured environment named ROS-TMS and Big Sensor Box. We started the development of a management system for an informationally structured environment named TMS (Town Management System) in Robot Town Project in 2005. Since then we are continuing our efforts for the improvement of the performance and the enhancement of the functions of the TMS. Recently, we launched a new version of TMS named ROS-TMS, which resolv...

  3. Technology in the Piano Lab: Band-in-a-Box--An Interview with E.J. Choe

    Science.gov (United States)

    Nardo, Rachel; Choe, E. J.

    2010-01-01

    This article presents an interview with E.J. Choe, director of the Music Academy at Indiana University-Purdue University Indianapolis, on how she became involved in the use of technology to teach piano and how the software program Band-in-a-Box has helped her in teaching her students. Choe shares that instead of sitting at a grand piano in her…

  4. Speeding up development activities in student projects with time boxing and scrum

    DEFF Research Database (Denmark)

    Ovesen, Nis; Eriksen, Kaare; Tollestrup, Christian

    2011-01-01

    This research project investigates how procedures from agile software development can be of benefit to development activities in projects of design engineering students. The agile methods Scrum and Time boxing are evaluated through a student workshop focusing on near-future concepts for design...... and awareness of methodical efficiency of the student teams. It is therefore further argued that these methods are both applicable and useful to none-software projects, and that they may correspond to a general tendency of a faster pace in product development within the markets of lifestyle products....

  5. Software attribute visualization for high integrity software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1998-03-01

    This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

  6. COMPUTER MODEL AND SIMULATION OF A GLOVE BOX PROCESS

    International Nuclear Information System (INIS)

    Foster, C.

    2001-01-01

    The development of facilities to deal with the disposition of nuclear materials at an acceptable level of Occupational Radiation Exposure (ORE) is a significant issue facing the nuclear community. One solution is to minimize the worker's exposure though the use of automated systems. However, the adoption of automated systems for these tasks is hampered by the challenging requirements that these systems must meet in order to be cost effective solutions in the hazardous nuclear materials processing environment. Retrofitting current glove box technologies with automation systems represents potential near-term technology that can be applied to reduce worker ORE associated with work in nuclear materials processing facilities. Successful deployment of automation systems for these applications requires the development of testing and deployment strategies to ensure the highest level of safety and effectiveness. Historically, safety tests are conducted with glove box mock-ups around the finished design. This late detection of problems leads to expensive redesigns and costly deployment delays. With wide spread availability of computers and cost effective simulation software it is possible to discover and fix problems early in the design stages. Computer simulators can easily create a complete model of the system allowing a safe medium for testing potential failures and design shortcomings. The majority of design specification is now done on computer and moving that information to a model is relatively straightforward. With a complete model and results from a Failure Mode Effect Analysis (FMEA), redesigns can be worked early. Additional issues such as user accessibility, component replacement, and alignment problems can be tackled early in the virtual environment provided by computer simulation. In this case, a commercial simulation package is used to simulate a lathe process operation at the Los Alamos National Laboratory (LANL). The Lathe process operation is indicative of

  7. Developing Computer Software for Use in the Speech/Comunications Classroom.

    Science.gov (United States)

    Krauss, Beatrice J.

    Appropriate software can turn the microcomputer from the dumb box into a teaching tool. One resource for finding appropriate software is the organization Edunet. It allows the user to access the mainframe of 18 major universities and has developed a communications network with 130 colleges. It also handles billing, does periodic software…

  8. Changes in position and quality of preferred nest box: effects on nest box use by laying hens

    DEFF Research Database (Denmark)

    Riber, Anja Brinch; Nielsen, Birte L.

    2013-01-01

    Using laying hens, we investigated whether position of a nest box, both within the pen and relative to other nest boxes, influenced the preference for a nest box, and how a sudden and marked change to the preferred box influenced the use of nest boxes by the hens. Groups (n=12) of 15 Isa Warren...... hens were housed in pens, each with five identical nest boxes in different positions: Two single (in a corner or not) and a triplet of nest boxes (one of which in a corner). The use of nest boxes was determined by the number of eggs laid daily in each box. Three experiments, each lasting 10 days, were...... carried out. First, the undisturbed use of each of the nest box types was investigated, and a strong preference (Peggs laid there. Second, each of the hen groups was moved to another pen allocated at random, and where...

  9. Black holes

    International Nuclear Information System (INIS)

    Carter, B.

    1980-01-01

    In years 1920 as a result of quantum mechanics principles governing the structure of ordinary matter, a sudden importance for a problem raised a long time ago by Laplace: what happens when a massive body becomes so dense that even light cannot escape from its gravitational field. It is difficult to conceive how could be avoided in the actual universe the accumulation of important masses of cold matter having been submitted to gravitational breaking down followed by the formation of what is called to day a black hole [fr

  10. Reliability of software

    International Nuclear Information System (INIS)

    Kopetz, H.

    1980-01-01

    Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

  11. Controlling Software Piracy.

    Science.gov (United States)

    King, Albert S.

    1992-01-01

    Explains what software manufacturers are doing to combat software piracy, recommends how managers should deal with this problem, and provides a role-playing exercise to help students understand the issues in software piracy. (SR)

  12. Advances in the theory of box integrals

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, David H.; Borwein, J.M.; Crandall, R.E.

    2009-06-25

    Box integrals - expectations <|{rvec r}|{sup s}> or <|{rvec r}-{rvec q}|{sup s}> over the unit n-cube (or n-box) - have over three decades been occasionally given closed forms for isolated n,s. By employing experimental mathematics together with a new, global analytic strategy, we prove that for n {le} 4 dimensions the box integrals are for any integer s hypergeometrically closed in a sense we clarify herein. For n = 5 dimensions, we show that a single unresolved integral we call K{sub 5} stands in the way of such hyperclosure proofs. We supply a compendium of exemplary closed forms that naturally arise algorithmically from this theory.

  13. Grey Box Modelling of Hydrological Systems

    DEFF Research Database (Denmark)

    Thordarson, Fannar Ørn

    The main topic of the thesis is grey box modelling of hydrologic systems, as well as formulation and assessment of their embedded uncertainties. Grey box model is a combination of a white box model, a physically-based model that is traditionally formulated using deterministic ordinary differential...... the lack of fit in state space formulation, and further support decisions for a model expansion. By using stochastic differential equations to formulate the dynamics of the hydrological system, either the complexity of the model can be increased by including the necessary hydrological processes...... in the model, or formulation of process noise can be considered so that it meets the physical limits of the hydrological system and give an adequate description of the embedded uncertainty in model structure. The thesis consists of two parts: a summary report and a part which contains six scientific papers...

  14. Space Flight Software Development Software for Intelligent System Health Management

    Science.gov (United States)

    Trevino, Luis C.; Crumbley, Tim

    2004-01-01

    The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

  15. Performance Evaluation of a Double-Glazed Box-Type Solar Oven with Reflector

    Directory of Open Access Journals (Sweden)

    Joshua Folaranmi

    2013-01-01

    Full Text Available This research paper describes the performance evaluation of a double-glazed box-type solar oven with reflector fabricated using locally available materials, compressed sawdust with binder; size of the box is 700 mm ×  700 mm × 400 mm and 10 mm thickness. The experimental solar cooker consists of an aluminium absorber plate (1 mm painted matt black and a double-glazed lid. The bottom and sides are lagged with fibreglass wool insulator, thickness = 50 mm,  W/m°C. The reflector consists of a wooden-framed commercially available specular plane mirror which is sized to form a cover for the box when not being in use. Its thermal performance was tested according to the ASAE International Test procedure and Bureau of Indian Standards (BIS for testing the thermal performance of box-type solar cooker. Thermal performance experiments were conducted in order to determine the first figure of merit (F1, the second figure of merit (F2 and standard cooking power (Ps. The obtained test results were employed to calculate the two figures of merit (F1, and F2 and the standard cooking power (P50 to be 0.11 Km2w−1, 0.31, and 23.95 W, respectively. Finally, the results illustrated that the cooker has a good reliability for cooking food and boiling water.

  16. Software Metrics: Measuring Haskell

    OpenAIRE

    Ryder, Chris; Thompson, Simon

    2005-01-01

    Software metrics have been used in software engineering as a mechanism for assessing code quality and for targeting software development activities, such as testing or refactoring, at areas of a program that will most benefit from them. Haskell has many tools for software engineering, such as testing, debugging and refactoring tools, but software metrics have mostly been neglected. The work presented in this paper identifies a collection of software metrics for use with Haskell programs. Thes...

  17. Software systems as cities

    OpenAIRE

    Wettel, Richard; Lanza, Michele

    2010-01-01

    Software understanding takes up a large share of the total cost of a software system. The high costs attributed to software understanding activities are caused by the size and complexity of software systems, by the continuous evolution that these systems are subject to, and by the lack of physical presence which makes software intangible. Reverse engineering helps practitioners deal with the intrinsic complexity of software, by providing a broad range of patterns and techniques. One of...

  18. Software Engineering Guidebook

    Science.gov (United States)

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  19. From Algorithmic Black Boxes to Adaptive White Boxes: Declarative Decision-Theoretic Ethical Programs as Codes of Ethics

    OpenAIRE

    van Otterlo, Martijn

    2017-01-01

    Ethics of algorithms is an emerging topic in various disciplines such as social science, law, and philosophy, but also artificial intelligence (AI). The value alignment problem expresses the challenge of (machine) learning values that are, in some way, aligned with human requirements or values. In this paper I argue for looking at how humans have formalized and communicated values, in professional codes of ethics, and for exploring declarative decision-theoretic ethical programs (DDTEP) to fo...

  20. Structured, Physically Inspired (Gray Box) Models Versus Black Box Modeling for Forecasting the Output Power of Photovoltaic Plants

    Czech Academy of Sciences Publication Activity Database

    Paulescu, M.; Brabec, Marek; Boata, R.; Badescu, V.

    2017-01-01

    Roč. 121, 15 February (2017), s. 792-802 ISSN 0360-5442 Grant - others:European Cooperation in Science and Technology(XE) COST ES1002 Institutional support: RVO:67985807 Keywords : photovoltaic plant * output power * forecasting * fuzzy model * generalized additive model Subject RIV: BB - Applied Statistics, Operational Research OBOR OECD: Statistics and probability Impact factor: 4.520, year: 2016

  1. Guideline for making application dossiers for novel proteins; Novel food dossiers: from black box to tool box

    NARCIS (Netherlands)

    Wagenberg, van C.P.A.; Janssens, B.; Kalk, C.; Sluis, van der A.; Noordam, M.Y.; Spiegel, van der M.

    2014-01-01

    This document describes when a new protein intended to market for human consumption is considered to be a novel food protein (novel protein) and when it is not, when an application dossier for authorisation must be made and when, in general, an application dossier for notification might be

  2. Software Intensive Systems

    National Research Council Canada - National Science Library

    Horvitz, E; Katz, D. J; Rumpf, R. L; Shrobe, H; Smith, T. B; Webber, G. E; Williamson, W. E; Winston, P. H; Wolbarsht, James L

    2006-01-01

    .... Recommend that DoN create a software acquisition specialty, mandate basic schooling for software acquisition specialists, close certain acquisition loopholes that permit poor development practices...

  3. Software Release Management

    National Research Council Canada - National Science Library

    Hoek, Andre van der; Hall, Richard S; Heimbigner, Dennis; Wolf, Alexander L

    1996-01-01

    .... Both developers and users of such software are affected by these complications. Developers need to accurately document complex and changing dependencies among the systems constituting the software...

  4. CASAS: A Smart Home in a Box.

    Science.gov (United States)

    Cook, Diane J; Crandall, Aaron S; Thomas, Brian L; Krishnan, Narayanan C

    2013-07-01

    While the potential benefits of smart home technology are widely recognized, a lightweight design is needed for the benefits to be realized at a large scale. We introduce the CASAS "smart home in a box", a lightweight smart home design that is easy to install and provides smart home capabilities out of the box with no customization or training. We discuss types of data analysis that have been performed by the CASAS group and can be pursued in the future by using this approach to designing and implementing smart home technologies.

  5. Making Blackness, Making Policy

    OpenAIRE

    Geller, Peter

    2012-01-01

    Too often the acknowledgment that race is a social construction ignores exactly how this construction occurs. By illuminating the way in which the category of blackness and black individuals are made, we can better see how race matters in America. Antidiscrimination policy, social science research, and the state's support of its citizens can all be improved by an accurate and concrete definition of blackness. Making Blackness, Making Policy argues that blackness and black people are literally...

  6. Black hole critical phenomena without black holes

    Indian Academy of Sciences (India)

    Black holes; numerical relativity; nonlinear sigma. Abstract. Studying the threshold of black hole formation via numerical evolution has led to the discovery of fascinating nonlinear phenomena. ... Theoretical and Computational Studies Group, Southampton College, Long Island University, Southampton, NY 11968, USA ...

  7. Software Testing Techniques and Strategies

    OpenAIRE

    Isha,; Sunita Sangwan

    2014-01-01

    Software testing provides a means to reduce errors, cut maintenance and overall software costs. Numerous software development and testing methodologies, tools, and techniques have emerged over the last few decades promising to enhance software quality. This paper describes Software testing, need for software testing, Software testing goals and principles. Further it describe about different Software testing techniques and different software testing strategies.

  8. Black Urine

    Directory of Open Access Journals (Sweden)

    Rahim Vakili

    2016-06-01

    Full Text Available A 2-year-old boy was born at term of healthy, non-consanguineous Iranian parents. His mother attended in the clinic with the history of sometimes discoloration of diapers after passing urine. She noticed that first at the age of one month with intensified in recent months. His Physical examination and growth parameters were normal. His mother denied taking any medication (sorbitol, nitrofurantoin, metronidazole, methocarbamol, sena and methyldopa (5. Qualitative urine examination showed dark black discoloration. By this history, alkaptonuria was the most clinical suspicious. A 24-hour-urine sample was collected and sent for quantitative measurements. The urine sample was highly positive for homogentisic acid and negative for porphyrin metabolites.

  9. Interaction Buckling Experiments of Box columns

    OpenAIRE

    永藤, 寿宮

    1988-01-01

    Box sections present very interesting properties in the field of compressed elements. The purpose of this experiment is to supply experimental data of interaction buckling (overall and local buckling). Test columns are classified into 4 types according to those columns length. Support conditions are pin-ended type by using new developed bowl shoe.

  10. Cereal Box Design: An Interdisciplinary Graphics Activity

    Science.gov (United States)

    Fitzgerald, Mike; Tsosie, Teri

    2012-01-01

    The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. Also, it lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in depth. The activity introduces a wide range of topics. They include graphic…

  11. Study of WATCH GRB error boxes

    DEFF Research Database (Denmark)

    Gorosabel, J.; Castro-Tirado, A. J.; Lund, Niels

    1995-01-01

    We have studied the first WATCH GRB Catalogue ofγ-ray Bursts in order to find correlations between WATCH GRB error boxes and a great variety of celestial objects present in 33 different catalogues. No particular class of objects has been found to be significantly correlated with the WATCH GRBs....

  12. Reflective Cracking between Precast Prestressed Box Girders

    Science.gov (United States)

    2017-06-30

    The adjacent precast prestressed concrete box-beam bridge is the bridge of choice for short and short-to-medium span bridges. This choice is because of the ease of construction, favorable span-to-depth ratios, aesthetic appeal, and high torsional sti...

  13. Statistical Software Engineering

    Science.gov (United States)

    1998-04-13

    multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

  14. Agile Software Development

    Science.gov (United States)

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  15. Ensuring Software IP Cleanliness

    Directory of Open Access Journals (Sweden)

    Mahshad Koohgoli

    2007-12-01

    Full Text Available At many points in the life of a software enterprise, determination of intellectual property (IP cleanliness becomes critical. The value of an enterprise that develops and sells software may depend on how clean the software is from the IP perspective. This article examines various methods of ensuring software IP cleanliness and discusses some of the benefits and shortcomings of current solutions.

  16. Improving Software Developer's Competence

    DEFF Research Database (Denmark)

    Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

    2002-01-01

    Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

  17. Great software debates

    CERN Document Server

    Davis, A

    2004-01-01

    The industry’s most outspoken and insightful critic explains how the software industry REALLY works. In Great Software Debates, Al Davis, shares what he has learned about the difference between the theory and the realities of business and encourages you to question and think about software engineering in ways that will help you succeed where others fail. In short, provocative essays, Davis fearlessly reveals the truth about process improvement, productivity, software quality, metrics, agile development, requirements documentation, modeling, software marketing and sales, empiricism, start-up financing, software research, requirements triage, software estimation, and entrepreneurship.

  18. Isolation and characterization of the mating type locus of Mycosphaerella fijiensis, the causal agent of black leaf streak disease of banana

    NARCIS (Netherlands)

    Conde, L.; Waalwijk, C.; Canto-Canché, B.B.; Kema, G.H.J.; Crous, P.W.; James, A.C.; Abeln, E.C.A.

    2007-01-01

    Idiomorphs mat1-1 and mat1-2 from Mycosphaerella fijiensis, the causal agent of black leaf streak disease of banana, were isolated. Degenerate oligos were used to amplify the HMG box of the mat1-2 idiomorph from M. fijiensis, showing homology with the HMG box of Mycosphaerella graminicola. Using a

  19. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  20. Views on Software Testability

    OpenAIRE

    Shimeall, Timothy; Friedman, Michael; Chilenski, John; Voas, Jeffrey

    1994-01-01

    The field of testability is an active, well-established part of engineering of modern computer systems. However, only recently have technologies for software testability began to be developed. These technologies focus on accessing the aspects of software that improve or depreciate the ease of testing. As both the size of implemented software and the amount of effort required to test that software increase, so will the important of software testability technologies in influencing the softwa...

  1. Effect of material uncertainties on dynamic response of segmental box girder bridge

    Directory of Open Access Journals (Sweden)

    Suchart Limkatanyu

    2007-11-01

    Full Text Available The main objective of this paper was to investigate the effect of material uncertainties on dynamic response of segmental box girder bridge subjected to a moving load, in this case a rapid passing trains. Literatures concerned with the design of segmental box girder bridge, the application of finite element analysis to model the segmental box girder bridge, and the minimum requirement for structural conditions of the bridge were described and discussed in detail. A series of finite element analysis was carried out using SAP2000 Nonlinear software. The effect was investigated by varying the Modulus of Elasticity by 5%, 10% and 15%. The results were then compared with the case of assumed uniform property which had already been checked for model accuracy using the Standard prEN 1991-2. The results showed that, for the uniform case, the dynamic responses of the bridge gave the highest response at the resonance speed. When considering the non-uniform material properties (non-uniform case, the effect of material uncertainties appeared to have an effect on both displacement and acceleration responses. Nonetheless, the dynamic factor provided in the design code was sufficient for designing the segmental box girder bridge with either uniform or non-uniform material properties for the train speeds considered in this study.

  2. Modelling of airflow in a closed simulation box with regard to atmospheric optical link

    Directory of Open Access Journals (Sweden)

    Hajek Lukas

    2014-03-01

    Full Text Available Article is dealing with defining of mathematical turbulent air flow numerical model in the laboratory box with help of ANSYS Fluent software application. The paper describes real measurement of parameters of mechanical turbulences created by high-speed ventilator mounted on the simulation box. The real measurement took place in two planes perpendicular to each other, input and output slot. Subsequently the simulation of mechanical air flow was performed by the help of k-ε and k-ω turbulent models. The results of individual simulations were evaluated by statistical model in the same points, planes respectively, in which the real measurement was made. Other simulation was dealing with effect of heaters inside of closed laboratory box with regards to optical beam degradation. During real measurement was performed temperature point measurement by probe placed inside of the box. The probe was recording air temperature every one second during seven minutes long measurement. The results comparison of simulated and measured data was made in the end. The maximal temperature reached approximately 50 °C in both cases. Also the air flow character in dependence on the number of hot-air extraction ventilators was monitored.

  3. Black Silicon Solar Cells with Black Ribbons

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io

    2016-01-01

    We present the combination of mask-less reactive ion etch (RIE) texturing and blackened interconnecting ribbons as a method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon made by mask-less reactive ion etching has total, average...... reflectance below 0.5% across a 156x156 mm2 silicon (Si) wafer. Black interconnecting ribbons were realized by oxidizing copper resulting in reflectance below 3% in the visible wavelength range. Screen-printed Si solar cells were realized on 156x156 mm2 black Si substrates with resulting efficiencies...... in the range 15.7-16.3%. The KOH-textured reference cell had an efficiency of 17.9%. The combination of black Si and black interconnecting ribbons may result in aesthetic, all-black panels based on conventional, front-contacted silicon solar cells....

  4. Black Silicon Solar Cells with Black Ribbons

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io

    2016-01-01

    We present the combination of mask-less reactive ion etch (RIE) texturing and blackened interconnecting ribbons as a method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon made by mask-less reactive ion etching has total, average...... in the range 15.7-16.3%. The KOH-textured reference cell had an efficiency of 17.9%. The combination of black Si and black interconnecting ribbons may result in aesthetic, all-black panels based on conventional, front-contacted silicon solar cells....... reflectance below 0.5% across a 156x156 mm2 silicon (Si) wafer. Black interconnecting ribbons were realized by oxidizing copper resulting in reflectance below 3% in the visible wavelength range. Screen-printed Si solar cells were realized on 156x156 mm2 black Si substrates with resulting efficiencies...

  5. The Box Turtle: Room with a View on Species Decline.

    Science.gov (United States)

    Belzer, Bill; Steisslinger, Mary Beth

    1999-01-01

    Surveys salient aspects of eastern box-turtle natural history. Explores the societal and ecological factors that have contributed to the decline of the box-turtle population. Contains 18 references. (WRM)

  6. A comparison of software programs to determine curie content

    International Nuclear Information System (INIS)

    Hansen, C.J.; Miller C.C.

    1995-01-01

    Commercial nuclear power plants have used various methods to determine the curie content of radwaste packages to comply with shipping and disposal regulations. Several computer software packages are available which can determine the curie content of a package based on the geometry of the package and the dose rate of the package provided a given source spectrum. This paper will compare three of the more commonly used software packages. A brief review of the selection and use of software programs at Diablo Canyon Power Plant for radwaste and radioactive material shipments will be provided. These software packages are the PAKRAD program by Bechtel (which utilizes EPRI DOSCON data), RAMSHP by WMG and MICROSHIELD by Grove Engineering. A comparison of the software packages in the calculation of curie content for a box of dry active waste and a cartridge filter will be presented. A summary of program limitations will also be provided

  7. Software Quality Assurance Metrics

    Science.gov (United States)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  8. Black holes. Chapter 6

    International Nuclear Information System (INIS)

    Penrose, R.

    1980-01-01

    Conditions for the formation of a black hole are considered, and the properties of black holes. The possibility of Cygnus X-1 as a black hole is discussed. Einstein's theory of general relativity in relation to the formation of black holes is discussed. (U.K.)

  9. Black Eye: First Aid

    Science.gov (United States)

    First aid Black eye Black eye: First aid By Mayo Clinic Staff A black eye is caused by bleeding under the skin around the eye. Most injuries that cause a ... 13, 2018 Original article: http://www.mayoclinic.org/first-aid/first-aid-black-eye/basics/ART-20056675 . Mayo ...

  10. Software Engineering Program: Software Process Improvement Guidebook

    Science.gov (United States)

    1996-01-01

    The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

  11. Software Acquisition and Software Engineering Best Practices

    National Research Council Canada - National Science Library

    Eslinger, S

    1999-01-01

    ...) of Senate Report 106-50, is given for reference in Table 1-1 of the body of this report. This paper recommends a set of software acquisition and software engineering best practices that addresses the issues raised in the Senate Report...

  12. Amalgamation of Personal Software Process in Software ...

    African Journals Online (AJOL)

    Today, concern for quality has become an international movement. Even though most industrial organizations have now adopted modern quality principles, the software community has continued to rely on testing as the principal quality management method. Different decades have different trends in software engineering.

  13. From Software Development to Software Assembly

    NARCIS (Netherlands)

    Sneed, Harry M.; Verhoef, Chris

    2016-01-01

    The lack of skilled programming personnel and the growing burden of maintaining customized software are forcing organizations to quit producing their own software. It's high time they turned to ready-made, standard components to fulfill their business requirements. Cloud services might be one way to

  14. Seal boxes from the Viminacium site

    Directory of Open Access Journals (Sweden)

    Milovanović Bebina

    2013-01-01

    Full Text Available Bronze seal boxes that had the function of holding the wax seal on the Viminacium site - Upper Moesia (Stari Kostolac, Serbia, mainly from the area of the necropolis (ten were found in the graves and ten at the cemetery between the graves. Six are from buildings that had a storage function, five are from public facilities - an amphitheatre, and only one find is from the military fort of the legion VII Claudia, which was stationed in Viminacium in the second half of the 1st century. Thirty-two seal boxes have been processed: nine whole, six with fragmented upper and lower parts, seven bases and ten covers. Seal boxes consist of two parts: the cover and the base. The cover is decorated with figural images, concentric rings and especially with applied ornaments. Some of the motifs are filled with enamel. The base always has three to five circular perforations at the bottom, the side walls are a height of 4 to 5 mm with two opposed notches or slots which are thought to have facilitated the tying of the seal box to a package or a document. The lock mechanism is operated using the hinges principle. Some specimens have a circular extension on the cover with a thorn on the bottom. This fits the hollow in the base, through which passes a thorn for the additional fixing of the cover. Based on shape and decoration, seal boxes were classified into five types: I - elliptical or oval shaped with a figural representation on the cover derived in relief; II/1 - leaf or heart-shaped with a special, riveted ornament; II/2 - leaf or heart-shaped with enamel on the cover; III/1 - circular showing a form in relief; III/2 - circular with cast concentric rings, with no enamel; III/3 - circular with concentric rings with enamel on the cover; IV - diamond shaped with enamel on the cover and V - square with enamel on the cover. The seal boxes dominate chronologically from the first half of the 2nd and throughout the 3rd century.

  15. Corrosion Evaluation of Tank 40 Leak Detection Box

    Energy Technology Data Exchange (ETDEWEB)

    Mickalonis, J.I.

    1999-07-29

    'Leak detection from the transfer lines in the tank farm has been a concern for many years because of the need to minimize exposure of personnel and contamination of the environment. The leak detection box (LDB) is one line of defense, which must be maintained to meet this objective. The evaluation of a failed LDB was one item from an action plan aimed at minimizing the degradation of LDBs. The Tank 40 LDB, which failed in service, was dug up and shipped to SRTC for evaluation. During a video inspection while in service, this LDB was found to have black tubercles on the interior, which suggested possible microbial involvement. The failure point, however, was believed to have occurred in the drain line from the transfer line jacket. Visual, metallurgical, and biological analyses were performed on the LDB. The analysis results showed that there was not any adverse microbiological growth or significant localized corrosion. The corrosion of the LDB was caused by exposure to aqueous environments and was typical of carbon steel pipes in soil environments.'

  16. Ballast system for maintaining constant pressure in a glove box

    Science.gov (United States)

    Shlichta, Paul J.

    1989-09-01

    A ballast system is disclosed for a glove box including a fixed platform on which is mounted an inflatable bag on top of which resides a cover and a weight. The variable gas volume of the inflatable bag communicates with that of the glove box via a valved tube. The weight and the gas volume are selected to maintain a relatively constant pressure in the glove box despite variations in the glove box volume while avoiding the use of complicated valving apparatus.

  17. Search for black holes

    International Nuclear Information System (INIS)

    Cherepashchuk, Anatolii M

    2003-01-01

    Methods and results of searching for stellar mass black holes in binary systems and for supermassive black holes in galactic nuclei of different types are described. As of now (June 2002), a total of 100 black hole candidates are known. All the necessary conditions Einstein's General Relativity imposes on the observational properties of black holes are satisfied for candidate objects available, thus further assuring the existence of black holes in the Universe. Prospects for obtaining sufficient criteria for reliably distinguishing candidate black holes from real black holes are discussed. (reviews of topical problems)

  18. The Design and Analysis of the Hydraulic-pressure Seal of the Engine Box

    Science.gov (United States)

    Chen, Zhenya; Shen, Xingquan; Xin, Zhijie; Guo, Tingting; Liao, Kewei

    2017-12-01

    According to the sealing requirements of engine casing, using NX software to establish three-dimensional solid model of the engine box. Designing two seals suppress schemes basing on analyzing the characteristics of the case structure, one of seal is using two pins on one side to localize, the other is using cylinder to top tight and fasten, Clarifying the reasons for the using the former scheme have a lower cost. At the same time analysesing of the forces and deformation of the former scheme using finite element analysis software and the NX software, results proved that the pressure scheme can meet the actual needs of the program. It illustrated the composition of the basic principles of manual pressure and hydraulic system, verifed the feasibility of the seal program using experiment, providing reference for the experimental program of hydrostatic pressure in the future.

  19. Cross-instrument Analysis Correlation Software

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-28

    This program has been designed to assist with the tracking of a sample from one analytical instrument to another such as SEM, microscopes, micro x-ray diffraction and other instruments where particular positions/locations on the sample are examined, photographed, etc. The software is designed to easily enter the position of fiducials and locations of interest such that in a future session in the same of different instrument the positions of interest can be re-found through using the known location fiducials in the current and reference session to transform the point into the current sessions coordinate system. The software is dialog box driven guiding the user through the necessary data entry and program choices. Information is stored in a series of text based extensible markup language (XML) files.

  20. 47 CFR 90.241 - Radio call box operations.

    Science.gov (United States)

    2010-10-01

    ... box installations in areas where such frequencies are available for fixed system use subject to the... 47 Telecommunication 5 2010-10-01 2010-10-01 false Radio call box operations. 90.241 Section 90... PRIVATE LAND MOBILE RADIO SERVICES Non-Voice and Other Specialized Operations § 90.241 Radio call box...

  1. Grey-Box Modelling of Pharmacokinetic /Pharmacodynamic Systems

    DEFF Research Database (Denmark)

    Tornøe, Christoffer Wenzel; Jacobsen, Judith L.; Pedersen, Oluf

    2004-01-01

    Grey-box pharmacokinetic/pharmacodynamic (PK/PD) modelling is presented as a promising way of modelling PK/PD systems. The concept behind grey-box modelling is based on combining physiological knowledge along with information from data in the estimation of model parameters. Grey-box modelling...

  2. 30 CFR 18.49 - Connection boxes on machines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Connection boxes on machines. 18.49 Section 18... Design Requirements § 18.49 Connection boxes on machines. Connection boxes used to facilitate replacement of cables or machine components shall be explosion-proof. Portable-cable terminals on cable reels...

  3. 31 CFR 515.326 - Custody of safe deposit boxes.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Custody of safe deposit boxes. 515... Definitions § 515.326 Custody of safe deposit boxes. Safe deposit boxes shall be deemed to be in the custody... upon the meaning of the term custody. ...

  4. 31 CFR 500.326 - Custody of safe deposit boxes.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Custody of safe deposit boxes. 500... Definitions § 500.326 Custody of safe deposit boxes. Safe deposit boxes shall be deemed to be in the custody... upon the meaning of the term custody. ...

  5. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender roller bearing journal boxes. 230.103... Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing journal boxes shall be maintained in a safe and suitable condition. ...

  6. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

  7. Using Origami Boxes to Explore Concepts of Geometry and Calculus

    Science.gov (United States)

    Wares, Arsalan

    2011-01-01

    The purpose of this classroom note is to provide an example of how a simple origami box can be used to explore important concepts of geometry and calculus. This article describes how an origami box can be folded, then it goes on to describe how its volume and surface area can be calculated. Finally, it describes how the box could be folded to…

  8. 77 FR 74513 - Folding Gift Boxes From China

    Science.gov (United States)

    2012-12-14

    ... COMMISSION Folding Gift Boxes From China Determination On the basis of the record \\1\\ developed in the... antidumping duty order on folding gift boxes from China would be likely to lead to continuation or recurrence... Commission are contained in USITC Publication 4365 (November 2012), entitled Folding Gift Boxes from China...

  9. A white box perspective on behavioural adaptation

    DEFF Research Database (Denmark)

    Bruni, Roberto; Corradini, Andrea; Gadducci, Fabio

    2015-01-01

    We present a white-box conceptual framework for adaptation developed in the context of the EU Project ASCENS coordinated by Martin Wirsing. We called it CoDA, for Control Data Adaptation, since it is based on the notion of control data. CoDA promotes a neat separation between application and adap......We present a white-box conceptual framework for adaptation developed in the context of the EU Project ASCENS coordinated by Martin Wirsing. We called it CoDA, for Control Data Adaptation, since it is based on the notion of control data. CoDA promotes a neat separation between application...... and adaptation logic through a clear identification of the set of data that is relevant for the latter. The framework provides an original perspective from which we survey a representative set of approaches to adaptation, ranging from programming languages and paradigms to computational models and architectural...

  10. The Central Nervous System of Box Jellyfish

    DEFF Research Database (Denmark)

    Garm, Anders Lydik; Ekström, Peter

    2008-01-01

    of behaviors in the box jellyfish such as obstacle avoidance and navigation. The need to process the visual information and turn it into the appropriate behavior puts strong demands on the nervous system of box jellyfish, which appears more elaborate than in other cnidarians. Here, the central part...... of this nervous system is described. Each rhopalium holds a separate part of the CNS with 1,000 nerve cells and a large amount of neuropil. The rhopalial nervous system has several subsystems defined by the anatomy, location, and immunocytochemistry of the cells. Most of the subsystems connect to one or more...... of the eye types, and it is likely that the rhopalial nervous system accounts for most of the visual processing. The major part of the CNS is made up of a ring nerve encircling the bell shaped body. The ring nerve holds around 10,000 cells and is directly connected to all four rhopalial nervous systems...

  11. Removable glove for a glove box

    International Nuclear Information System (INIS)

    Lucas, J.M.

    1982-01-01

    The glove includes one part forming a cuff and another part forming the glove. These two parts are joined in a leak-tight manner by a rigid ring. The glove part is interchangeable without breaking the seal through two neighbouring grooves formed on the ring to receive a bead made on the open end of the glove. The grooves are visible when the glove is placed outside the glove box, thereby enabling the glove part to be changed in this position [fr

  12. PCB-Based Break-Out Box

    Science.gov (United States)

    Lee, Jason H.

    2011-01-01

    Break-out boxes (BOBs) are necessary for all electrical integration/cable checkouts and troubleshooting. Because the price of a BOB is high, and no work can be done without one, often the procedure stops, simply waiting for a BOB. A less expensive BOB would take less time in the integration, testing, and troubleshooting process. The PCB-based BOB works and looks the same as a standard JPL BOB, called Gold Boxes. The only differences between the old BOB and the new PCB-based BOB is that the new one has 80 percent of its circuitry in a printed circuit board. This process reduces the time for fabrication, thus making the BOBs less expensive. Moreover, because of its unique design, the new BOBs can be easily assembled and fixed. About 80 percent of the new PCB-based BOB is in a $22 (at the time of this reporting) custom-designed, yet commercially available PCB. This device has been used successfully to verify that BOB cables were properly made. Also, upon completion, the BOB was beeped out via a multimeter to ensure that all sockets on the connectors were properly connected to the respective banana jack. When compared to the Gold Box BOBs, the new BOB has many advantages. It is much more cost efficient, it delivers equal usability at substantially lower cost of the BOB, and the Gold Box is much heavier when compared to the new BOB. The new BOB is also a bit longer and much more versatile in that connectors are easily changeable and if a banana jack is broken, it can be replaced instead of throwing away an entire BOB.

  13. Dry boxes and inert atmosphere techniques

    International Nuclear Information System (INIS)

    Bartak, D.E.

    1987-01-01

    Practitioners need to conduct experiments with molten salts in an inert atmosphere owing to the chemical reactivity of these media. Most fused salt solvent systems show reactivity to water and/or oxygen, which results in significant chemical changes in the properties of these solvents. Although several studies on the nature of an oxygen/oxide electrode in this melt have been reported, the reactions have not been fully understood because of apparent water contamination in many cases. Nitrate melt systems are also hygroscopic; for example, the LiNO 3 -KNO 3 eutectic (177 0 C) absorbs water to at least 0.2% by weight. The result is that the electrochemistry of heavier, electropositive metal ions has been significantly altered. In addition, trace amounts of water have been shown to significantly affect the oxygen-oxide redox chemistry in NaNO 3 -KNO 3 melts (250 0 C). The haloaluminates, which include AlCl 3 -NaCl (175 0 C), as well as AlCl 3 -organic salt binaries are particularly sensitive to the presence of both oxygen and moisture. Oxygen is a strong oxidant in the fused hydroxide systems with formation of superoxide ion from either oxide or water. This chapter describes general, inert atmosphere techniques which can be used by the molten salt experimentalist. Because of the limitations of volatility, vacuum manipulations are not considered. Rather, the use of glove boxes, glove bags, and inert bench-top techniques are discussed. The areas covered are: glove box and bag equipment, operation and maintenance of glove boxes and glove bags, and common operations conducted inside glove boxes

  14. An Evaluation of Output Quality of Machine Translation (Padideh Software vs. Google Translate)

    Science.gov (United States)

    Azer, Haniyeh Sadeghi; Aghayi, Mohammad Bagher

    2015-01-01

    This study aims to evaluate the translation quality of two machine translation systems in translating six different text-types, from English to Persian. The evaluation was based on criteria proposed by Van Slype (1979). The proposed model for evaluation is a black-box type, comparative and adequacy-oriented evaluation. To conduct the evaluation, a…

  15. Finite element based investigation of buckling and vibration behaviour of thin walled box beams

    Directory of Open Access Journals (Sweden)

    Ramkumar K.

    2013-12-01

    Full Text Available Thin-walled box type conventional and composite structures are having wide applications for building the structural system which are used in advanced ships, aerospace, civil, construction equipment and etc. Often these structures are subjected to vibration and buckling due to the environmental effect such as mechanical, thermal, electrical, magnetic, and acoustic or a combination of these. Also dampingmaterial and structural stiffness plays an important role for the improvement of vibration, noise control, fatigue and bulking resistance of these structures. So it is important to know the dynamic and buckling characteristics of these structures. Pre-stress in a structure affects the stiffness, which modifies the dynamic and stability characteristics of the structure. So it is also important to know the influence of pre-stress on the vibration and buckling character. In this paper, buckling and dynamic characteristics of the thin-walled box type structures are analyzed using finite element software ANSYS.

  16. Pragmatic Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan; Jensen, Rikke Hagensby

    2014-01-01

    We understand software innovation as concerned with introducing innovation into the development of software intensive systems, i.e. systems in which software development and/or integration are dominant considerations. Innovation is key in almost any strategy for competitiveness in existing markets......, for creating new markets, or for curbing rising public expenses, and software intensive systems are core elements in most such strategies. Software innovation therefore is vital for about every sector of the economy. Changes in software technologies over the last decades have opened up for experimentation......, learning, and flexibility in ongoing software projects, but how can this change be used to facilitate software innovation? How can a team systematically identify and pursue opportunities to create added value in ongoing projects? In this paper, we describe Deweyan pragmatism as the philosophical foundation...

  17. Software Engineering Improvement Plan

    Science.gov (United States)

    2006-01-01

    In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

  18. Improving Software Reliability Forecasting

    NARCIS (Netherlands)

    Burtsy, Bernard; Albeanu, Grigore; Boros, Dragos N.; Popentiu, Florin; Nicola, V.F.

    1996-01-01

    This work investigates some methods for software reliability forecasting. A supermodel is presented as a suited tool for prediction of reliability in software project development. Also, times series forecasting for cumulative interfailure time is proposed and illustrated.

  19. Spotting software errors sooner

    International Nuclear Information System (INIS)

    Munro, D.

    1989-01-01

    Static analysis is helping to identify software errors at an earlier stage and more cheaply than conventional methods of testing. RTP Software's MALPAS system also has the ability to check that a code conforms to its original specification. (author)

  20. Avionics and Software Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the AES Avionics and Software (A&S) project is to develop a reference avionics and software architecture that is based on standards and that can be...

  1. Paladin Software Support Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Paladin Software Support Environment (SSE) occupies 2,241 square-feet. It contains the hardware and software tools required to support the Paladin Automatic Fire...

  2. Software service history report

    Science.gov (United States)

    2002-01-01

    The safe and reliable operation of software within civil aviation systems and equipment has historically been assured through the application of rigorous design assurance applied during the software development process. Increasingly, manufacturers ar...

  3. [Optimization of enzymatic extraction of polysaccharide from Dendrobium officinale by box-Behnken design and response surface methodology].

    Science.gov (United States)

    Hu, Jian-mei; Li, Jing-ling; Feng, Peng; Zhang, Xiang-dong; Zhong, Ming

    2014-01-01

    To optimize the processing of enzymatic extraction of polysaccharide from Dendrobium officinale. With phenol-sulfuric acid method and the DNS determination polysaccharide, Box-Behnken response surface methodology was used to optimize different enzyme dosage, reaction temperature and reaction time by using Design-Expert 8.05 software for data analysis and processing. According to Box-Behnken response, the best extraction conditions for the polysaccharide from Dendrobium officinale were as follows: the amount of enzyme complex was 3.5 mg/mL, hydrolysis temperature was 53 degrees C, and reaction time was 70 min. In accordance with the above process, the polysaccharide yield was 16.11%. Box-Behnken response surface methodology is used to optimize the enzymatic extraction process for the polysaccharide in this study, which is effective, stable and feasible.

  4. Effectiveness of box trainers in laparoscopic training

    Directory of Open Access Journals (Sweden)

    Dhariwal Anender

    2007-01-01

    Full Text Available Rationale and Objectives: Various devices are used to aid in the education of laparoscopic skills ranging from simple box trainers to sophisticated virtual reality trainers. Virtual reality system is an advanced and effective training method, however it is yet to be adopted in India due to its cost and the advanced technology required for it. Therefore, box trainers are being used to train laparoscopic skills. Hence this study was undertaken to assess the overall effectiveness of the box-training course. Study Procedure: The study was conducted during six-day laparoscopic skills training workshops held during 2006. Twenty five surgeons; age range of 26 to 45 years, of either sex, who had not performed laparoscopic surgery before; attending the workshop were evaluated. Each participant was given a list of tasks to perform before beginning the box-training course on day one and was evaluated quantitatively by rating the successful completion of each test. Evaluation began when the subject placed the first tool into the cannula and ended with task completion. Two evaluation methods used to score the subject, including a global rating scale and a task-specific checklist. After the subject completed all sessions of the workshop, they were asked to perform the same tasks and were evaluated in the same manner. For each task completed by the subjects, the difference in the scores between the second and first runs were calculated and interpreted as an improvement as a percentage of the initial score. Statistical Analysis: Wilcoxon matched-paired signed-ranks test was applied to find out the statistical significance of the results obtained. Results: The mean percentage improvement in scores for both the tasks, using global rating scale, was 44.5% + 6.930 (Mean + SD. For task 1, using the global rating scale mean percentage improvement was 49.4% + 7.948 (Mean + SD. For task 2, mean percentage improvement using global rating scale was 39.6% + 10.4 (Mean

  5. Software engineering measurement

    CERN Document Server

    Munson, PhD, John C

    2003-01-01

    By demonstrating how to develop simple experiments for the empirical validation of theoretical research and showing how to convert measurement data into meaningful and valuable information, this text fosters more precise use of software measurement in the computer science and software engineering literature. Software Engineering Measurement shows you how to convert your measurement data to valuable information that can be used immediately for software process improvement.

  6. Agent Building Software

    Science.gov (United States)

    2000-01-01

    AgentBuilder is a software component developed under an SBIR contract between Reticular Systems, Inc., and Goddard Space Flight Center. AgentBuilder allows software developers without experience in intelligent agent technologies to easily build software applications using intelligent agents. Agents are components of software that will perform tasks automatically, with no intervention or command from a user. AgentBuilder reduces the time and cost of developing agent systems and provides a simple mechanism for implementing high-performance agent systems.

  7. Software engineer's pocket book

    CERN Document Server

    Tooley, Michael

    2013-01-01

    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and qualit

  8. Software quality challenges.

    OpenAIRE

    Fitzpatrick, Ronan; Smith, Peter; O'Shea, Brendan

    2004-01-01

    This paper sets out a number of challenges facing the software quality community. These challenges relate to the broader view of quality and the consequences for software quality definitions. These definitions are related to eight perspectives of software quality in an end-to-end product life cycle. Research and study of software quality has traditionally focused on product quality for management information systems and this paper considers the challenge of defining additional quality factors...

  9. Software verification and testing

    Science.gov (United States)

    1985-01-01

    General procedures for software verification and validation are provided as a guide for managers, programmers, and analysts involved in software development. The verification and validation procedures described are based primarily on testing techniques. Testing refers to the execution of all or part of a software system for the purpose of detecting errors. Planning, execution, and analysis of tests are outlined in this document. Code reading and static analysis techniques for software verification are also described.

  10. Software Testing Requires Variability

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2003-01-01

    Software variability is the ability of a software system or artefact to be changed, customized or configured for use in a particular context. Variability in software systems is important from a number of perspectives. Some perspectives rightly receive much attention due to their direct economic...... impact in software production. As is also apparent from the call for papers these perspectives focus on qualities such as reuse, adaptability, and maintainability....

  11. Gammasphere software development

    International Nuclear Information System (INIS)

    Piercey, R.B.

    1994-01-01

    This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information

  12. Prohibiting Headgear for Safety in Amateur Boxing? Opinion of the Canadian Boxing Community: an Online Poll.

    Science.gov (United States)

    Dickinson, Philip; Rempel, Philip

    In 2013, the Amateur International Boxing Association (AIBA) introduced a rule banning headgear for male-senior open class boxers during competition. The AIBA has defended the rule change as motivated by safety and supported by internal unpublished studies. As a result, in 2018, the AIBA plans to universally prohibit headgear in competition: for all competitors (male and female), all ages and all levels. Within Canada, this ruling has generated controversy in the boxing community, yet there has been no overall measure of opinion. To address this, we instituted a voluntary, anonymous, online open-access poll to allow members of the boxing community to express their stance on headgear use in competition. In total, 636 responses were received. A total of 71.5 % of Canadian respondents believed headgear should be mandatory at all levels. Only 5.8 % agreed that headgear should be prohibited, as planned for 2018. Estimating results on a representative breakdown of boxing membership in Canada, a similar pattern emerged, whereby 68.2 % concurred with mandatory headgear while only 4.95 % supported its prohibition. Parents of boxers were almost unanimously against banning headgear, stating they would change sports as a result. Similarly, only 1.7 % of women believed headgear should be prohibited. The consensus of the Canadian boxing community largely opposes the rule changes that the AIBA has implemented. The results highlight risks posed to the long-term viability of the sport, if significant grassroots safety concerns are disregarded.

  13. Brane world black rings

    International Nuclear Information System (INIS)

    Sahay, Anurag; Sengupta, Gautam

    2007-01-01

    Five dimensional neutral rotating black rings are described from a Randall-Sundrum brane world perspective in the bulk black string framework. To this end we consider a rotating black string extension of a five dimensional black ring into the bulk of a six dimensional Randall-Sundrum brane world with a single four brane. The bulk solution intercepts the four brane in a five dimensional black ring with the usual curvature singularity on the brane. The bulk geodesics restricted to the plane of rotation of the black ring are constructed and their projections on the four brane match with the usual black ring geodesics restricted to the same plane. The asymptotic nature of the bulk geodesics are elucidated with reference to a bulk singularity at the AdS horizon. We further discuss the description of a brane world black ring as a limit of a boosted bulk black 2 brane with periodic identification

  14. Software variability management

    NARCIS (Netherlands)

    Bosch, J; Nord, RL

    2004-01-01

    During recent years, the amount of variability that has to be supported by a software artefact is growing considerably and its management is evolving into a major challenge during development, usage, and evolution of software artefacts. Successful management of variability in software leads to

  15. Software Language Evolution

    NARCIS (Netherlands)

    Vermolen, S.D.

    2012-01-01

    Software plays a critical role in our daily life. Vast amounts of money are spent on more and more complex systems. All software, regardless if it controls a plane or the game on your phone is never finished. Software changes when it contains bugs or when new functionality is added. This process of

  16. Computer software quality assurance

    International Nuclear Information System (INIS)

    Ives, K.A.

    1986-06-01

    The author defines some criteria for the evaluation of software quality assurance elements for applicability to the regulation of the nuclear industry. The author then analyses a number of software quality assurance (SQA) standards. The major extracted SQA elements are then discussed, and finally specific software quality assurance recommendations are made for the nuclear industry

  17. Software Engineering for Portability.

    Science.gov (United States)

    Stanchev, Ivan

    1990-01-01

    Discussion of the portability of educational software focuses on the software design and development process. Topics discussed include levels of portability; the user-computer dialog; software engineering principles; design techniques for student performance records; techniques of courseware programing; and suggestions for further research and…

  18. Astronomical Software Directory Service

    Science.gov (United States)

    Hanisch, R. J.; Payne, H.; Hayes, J.

    1998-01-01

    This is the final report on the development of the Astronomical Software Directory Service (ASDS), a distributable, searchable, WWW-based database of software packages and their related documentation. ASDS provides integrated access to 56 astronomical software packages, with more than 16,000 URL's indexed for full-text searching.

  19. Software Architecture Evolution

    Science.gov (United States)

    Barnes, Jeffrey M.

    2013-01-01

    Many software systems eventually undergo changes to their basic architectural structure. Such changes may be prompted by new feature requests, new quality attribute requirements, changing technology, or other reasons. Whatever the causes, architecture evolution is commonplace in real-world software projects. Today's software architects, however,…

  20. Software Quality Assurance in Software Projects: A Study of Pakistan

    OpenAIRE

    Faisal Shafique Butt; Sundus Shaukat; M. Wasif Nisar; Ehsan Ullah Munir; Muhammad Waseem; Kashif Ayyub

    2013-01-01

    Software quality is specific property which tells what kind of standard software should have. In a software project, quality is the key factor of success and decline of software related organization. Many researches have been done regarding software quality. Software related organization follows standards introduced by Capability Maturity Model Integration (CMMI) to achieve good quality software. Quality is divided into three main layers which are Software Quality Assurance (SQA), Software Qu...

  1. Global Software Development : - Software Architecture - Organization - Communication

    OpenAIRE

    Førde, Dan Sørensen

    2003-01-01

    Our globalized world has an impact on almost any area of our lives. The globalization affecting the business running around the globe, and forces employees and managers to think of new ways of doing their business. Globalization in the software development industry increased through the 1990s and is still increasing. The Internet makes the collaboration possible and the developers do not need to be co-located to work together on a common software development project. The ...

  2. Development of a low-cost temperature data monitoring. An upgrade for hot box apparatus

    Science.gov (United States)

    de Rubeis, T.; Nardi, I.; Muttillo, M.

    2017-11-01

    The monitoring phase has gained a fundamental role in the energy efficiency evaluation of a system. Number and typology of the probes depend on the physical quantity to be monitored, and on the size and complexity of the system. Moreover, a measurement equipment should be designed to allow the employment of probes different for number and measured physical quantities. For this reason, a scalable equipment represents a good way for easily carrying out a system monitoring. Proprietary software and high costs characterize instruments of current use, thus limiting the possibilities to realize customized monitoring. In this paper, a temperature measuring instrument, conceived, designed, and realized for real time applications, is presented. The proposed system is based on digital thermometers and on open-source code. A remarkable feature of the instrument is the possibility of acquiring data from a high and variable number of probes (order of hundred), assuring flexibility of the software, since it can be programmed, and low-cost of the hardware components. The contemporary use of multiple temperature probes suggested to apply this instrument for a hot box apparatus, although the software can be set for recording different physical quantities. A hot box compliant with standard EN ISO 8990 should be equipped with several temperature probes to investigate heat exchanges of a specimen wall and thermal field of the chambers. In this work, preliminary tests have been carried out focusing only on the evaluation of the prototypal system’s performance. The tests were realized by comparing different sensors, such as thermocouples and resistance thermometers, traditionally employed in hot box experiments. A preliminary test was realized imposing a dynamic condition with a thermoelectric Peltier cell. Data obtained by digital thermometers DS18B20, compared with the ones of Pt100 probes, show a good correlation. Based on these encouraging results, a further test was carried out

  3. 49 CFR 178.512 - Standards for steel or aluminum boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for steel or aluminum boxes. 178.512... aluminum boxes. (a) The following are identification codes for steel or aluminum boxes: (1) 4A for a steel box; and (2) 4B for an aluminum box. (b) Construction requirements for steel or aluminum boxes are as...

  4. Essence: Facilitating Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2008-01-01

      This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL) ......) – and a new method concept for software innovation – Essence – based on views, modes, and team roles. Finally, the paper reports from an early experiment using SIRL and Essence and identifies further research.......  This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL...

  5. Voice recognition software can be used for scientific articles

    DEFF Research Database (Denmark)

    Pommergaard, Hans-Christian; Huang, Chenxi; Burcharth, Jacob

    2015-01-01

    INTRODUCTION: Dictation of scientific articles has been recognised as an efficient method for producing high-quality, first article drafts. However, standardised transcription service by a secretary may not be available for all researchers and voice recognition software (VRS) may therefore...... with a median score of five (range: 3-9), which was improved with the addition of 5,000 words. CONCLUSION: The out-of-the-box performance of VRS was acceptable and improved after additional words were added. Further studies are needed to investigate the effect of additional software accuracy training....

  6. Boxing headguard performance in punch machine tests.

    Science.gov (United States)

    McIntosh, Andrew S; Patton, Declan A

    2015-09-01

    The paper presents a novel laboratory method for assessing boxing headguard impact performance. The method is applied to examine the effects of headguards on head impact dynamics and injury risk. A linear impactor was developed, and a range of impacts was delivered to an instrumented Hybrid III head and neck system both with and without an AIBA (Association Internationale de Boxe Amateur)-approved headguard. Impacts at selected speeds between 4.1 and 8.3 m/s were undertaken. The impactor mass was approximately 4 kg and an interface comprising a semirigid 'fist' with a glove was used. The peak contact forces were in the range 1.9-5.9 kN. Differences in head impact responses between the Top Ten AIBA-approved headguard and bare headform in the lateral and forehead tests were large and/or significant. In the 8.3 m/s fist-glove impacts, the mean peak resultant headform accelerations for bare headform tests was approximately 130 g compared with approximately 85 g in the forehead impacts. In the 6.85 m/s bare headform impacts, mean peak resultant angular head accelerations were in the range of 5200-5600 rad/s(2) and almost halved by the headguard. Linear and angular accelerations in 45° forehead and 60° jaw impacts were reduced by the headguard. The data support the opinion that current AIBA headguards can play an important role in reducing the risk of concussion and superficial injury in boxing competition and training. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  7. Design Research: Six Views in a Box

    DEFF Research Database (Denmark)

    2011-01-01

    ways to better understand the consequences of the disease, spread the knowledge to more people and diagnosis the disease as soon as possible. The class was partly sponsored by Johnson & Johnson, an international pharmaceutical company. The students also collaborated with the Danish Alzheimer...... Association. Future designers need competence in co-design. Just as important is the need to establish various formats for how to maintain the research results and make these a valuable asset for further inquiry. Thus, the outcome of the class is a box that can be used by Johnson & Johnson and other...

  8. Development of blanket box structure fabrication technology

    International Nuclear Information System (INIS)

    Mohri, K.; Sato, S.; Kawaguchi, I.; Sato, K.; Kuroda, T.; Hashimoto, T.; Sato, S.; Takatsu, H.

    1995-01-01

    Fabrication studies have been performed for the first wall and blanket box structure in the fusion experimental reactor designed in Japan. The hot isostatic pressing technique has been proposed as one of the most promising candidate methods for fabricating the first wall. This paper describes the trial fabrication of a half-scale mock-up for part of an outboard module near the midplane, without the internal structure of a breeding region, to investigate its feasibility and to clarify technological issues associated with the proposed fabrication technologies. (orig.)

  9. Piracy and Box Office Movie Revenues

    DEFF Research Database (Denmark)

    Peukert, Christian; Claussen, Jörg; Kretschmer, Tobias

    2017-01-01

    In this paper we evaluate the heterogeneous effects of online copyright enforcement. We ask whether the unexpected shutdown of the popular file hosting platform Megaupload had a differential effect on box office revenues of wide-release vs. niche movies. Identification comes from a comparison...... of movies that were available on Megaupload to those that were not. We show that only movies that premiere in a relatively large number of theaters benefitted from the shutdown of Megaupload. The average effect, however, is negative. We provide suggestive evidence that this result is driven by information...

  10. Keller-box method and its application

    CERN Document Server

    Prasad, Kerehalli V

    2014-01-01

    Most of the problems arising in science and engineering are nonlinear. They are inherently difficult to solve. Traditional analytical approximations are valid only for weakly nonlinear problems, and often break down for problems with strong nonlinearity. This book presents the current theoretical developments and applications of Keller-Box method to nonlinear problems. The first half of the bookaddresses basic concepts to understand the theoretical framework for the method. In the second half of the book, the authorsgive a number of examples of coupled nonlinear problems that have been solved

  11. Design Research: Six Views in a Box

    DEFF Research Database (Denmark)

    2011-01-01

    and close relations, and professional caretakers. Alzheimer's destroys brain cells, causing memory loss and problems with thinking and behavior severe enough to affect work, lifelong hobbies and social life. As Alzheimer’s is a fatal disease that affects many people, there is a strong interest in finding...... professional organizations in a user-driven approach to explore and learn what it means to identify and admit that a person has Alzheimer’s. Apart from making contributions to the common box, the students have written reports in which they reflect on their work both in relation to the design research process...

  12. Do Biomimetic Students Think Outside the Box?

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2017-01-01

    Biomimetics is a recognized method in ideation for getting access to new and – for the designer – novel knowledge, which hopefully will result in more novel and useful products. But do designers actually find new knowledge, i.e. think outside the box or do they stick to well-known biological...... phenomena? If they concentrate on animals and plants, which they beforehand have knowledge about, it could be expected that solutions will remind of what they would have found without using biomimetics. To investigate this question, the empirical results from a university course in biomimetics have been...

  13. Black hole hair removal

    International Nuclear Information System (INIS)

    Banerjee, Nabamita; Mandal, Ipsita; Sen, Ashoke

    2009-01-01

    Macroscopic entropy of an extremal black hole is expected to be determined completely by its near horizon geometry. Thus two black holes with identical near horizon geometries should have identical macroscopic entropy, and the expected equality between macroscopic and microscopic entropies will then imply that they have identical degeneracies of microstates. An apparent counterexample is provided by the 4D-5D lift relating BMPV black hole to a four dimensional black hole. The two black holes have identical near horizon geometries but different microscopic spectrum. We suggest that this discrepancy can be accounted for by black hole hair - degrees of freedom living outside the horizon and contributing to the degeneracies. We identify these degrees of freedom for both the four and the five dimensional black holes and show that after their contributions are removed from the microscopic degeneracies of the respective systems, the result for the four and five dimensional black holes match exactly.

  14. The Black Studies Boondoggle

    Science.gov (United States)

    Long, Richard A.

    1970-01-01

    Indicates tendencies dangerous to the basic purpose of Black Studies, and identifies four external challeges--imperialism, paternalism, nihilism, and materialism. An internal challenge is considered to be the use of European and Establishment constructs to analyze black reality. (DM)

  15. Black-Body Radiation

    Indian Academy of Sciences (India)

    Keywords. Black-body radiation; thermal radiation; heat; electromagnetic radiation; Stefan's Law; Stefan–Boltzmann Law; Wien's Law; Rayleigh–Jeans Law; black-body spectrum; ultraviolet catastrophe; zero point energy; photon.

  16. Box-Cox transformation on dataset from compositional studies of archaeological potteries

    International Nuclear Information System (INIS)

    Santos, J.O.; Santana Reis, Michael; Silva, J.E.

    2017-01-01

    In archaeometric data set it was verified by statistical tests that some variables almost never follow a multivariate normal distribution using logarithmic transformation or other. This work presents a multivariate Box-Cox transformation for Mardia's and Royton's tests for a data set of fifty ceramic fragments from archaeological site Justino, Xingo, Brazil, and one clay sample collected near of the site. The samples were analyzed by instrumental neutron activation analysis, INAA. The study was made using companion to applied regression package from R software and was tested by Hotelling's T 2 statistics. (author)

  17. Diversity and activity of biosurfactant-producing Pseudomonas in the rhizosphere of black pepper in Vietnam.

    Science.gov (United States)

    Tran, H; Kruijt, M; Raaijmakers, J M

    2008-03-01

    Phytophthora capsici is a major pathogen of black pepper and zoospores play an important role in the infection process. Fluorescent pseudomonads that produce biosurfactants with zoosporicidal activities were isolated from the black pepper rhizosphere in Vietnam, and their genotypic diversity and potential to control Phy. capsici root rot was determined. Biosurfactant-producing pseudomonads were genotypically and biochemically characterized by BOX-polymerase chain reaction (PCR), 16S-rDNA sequencing, reverse-phase-high-performance liquid chromatography and liquid chromatography-mass spectrometry analyses. Biosurfactant-producing fluorescent pseudomonads make up c. 1.3% of the culturable Pseudomonas population in the rhizosphere of black pepper. Although BOX-PCR revealed substantial genotypic diversity, the isolates were shown to produce the same biosurfactants and were all identified as Pseudomonas putida. When applied to black pepper stem cuttings, several of the biosurfactant-producing strains provided significant disease control. In absence of the disease, several of the bacterial strains promoted shoot and root growth of black pepper stem cuttings. Biosurfactant-producing pseudomonads indigenous to the rhizosphere of black pepper plants are genotypically diverse and provide a novel resource for the control of Phy. capsici root rot and growth promotion of black pepper stem cuttings. The results of this study provide a strong basis for further development of supplementary strategies with antagonistic bacteria to control foot and root rot of black pepper and to promote plant growth.

  18. NASA software documentation standard software engineering program

    Science.gov (United States)

    1991-01-01

    The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

  19. Science and Software

    Science.gov (United States)

    Zelt, C. A.

    2017-12-01

    Earth science attempts to understand how the earth works. This research often depends on software for modeling, processing, inverting or imaging. Freely sharing open-source software is essential to prevent reinventing the wheel and allows software to be improved and applied in ways the original author may never have envisioned. For young scientists, releasing software can increase their name ID when applying for jobs and funding, and create opportunities for collaborations when scientists who collect data want the software's creator to be involved in their project. However, we frequently hear scientists say software is a tool, it's not science. Creating software that implements a new or better way of earth modeling or geophysical processing, inverting or imaging should be viewed as earth science. Creating software for things like data visualization, format conversion, storage, or transmission, or programming to enhance computational performance, may be viewed as computer science. The former, ideally with an application to real data, can be published in earth science journals, the latter possibly in computer science journals. Citations in either case should accurately reflect the impact of the software on the community. Funding agencies need to support more software development and open-source releasing, and the community should give more high-profile awards for developing impactful open-source software. Funding support and community recognition for software development can have far reaching benefits when the software is used in foreseen and unforeseen ways, potentially for years after the original investment in the software development. For funding, an open-source release that is well documented should be required, with example input and output files. Appropriate funding will provide the incentive and time to release user-friendly software, and minimize the need for others to duplicate the effort. All funded software should be available through a single web site

  20. Dynamics of black holes

    OpenAIRE

    Hayward, Sean A.

    2008-01-01

    This is a review of current theory of black-hole dynamics, concentrating on the framework in terms of trapping horizons. Summaries are given of the history, the classical theory of black holes, the defining ideas of dynamical black holes, the basic laws, conservation laws for energy and angular momentum, other physical quantities and the limit of local equilibrium. Some new material concerns how processes such as black-hole evaporation and coalescence might be described by a single trapping h...

  1. Black holes are hot

    International Nuclear Information System (INIS)

    Gibbons, G.

    1976-01-01

    Recent work, which has been investigating the use of the concept of entropy with respect to gravitating systems, black holes and the universe as a whole, is discussed. The resulting theory of black holes assigns a finite temperature to them -about 10 -7 K for ordinary black holes of stellar mass -which is in complete agreement with thermodynamical concepts. It is also shown that black holes must continuously emit particles just like ordinary bodies which have a certain temperature. (U.K.)

  2. Monopole black hole skyrmions

    OpenAIRE

    Moss, I.G.; Shiiki, N.; Winstanley, E.

    2000-01-01

    Charged black hole solutions with pion hair are discussed. These can be\\ud used to study monopole black hole catalysis of proton decay.\\ud There also exist\\ud multi-black hole skyrmion solutions with BPS monopole behaviour.

  3. Alcoholism and Blacks.

    Science.gov (United States)

    Mosley, Bertha; And Others

    1988-01-01

    Notes that in America, knowledge base concerning alcoholism is concentrated on drinking patterns of Whites, and that Black Americans often differ in their drinking behavior, resulting in a need to clarify issues regarding alcoholism and Blacks. Provides theoretical information useful in better discerning drinking behavior of Blacks. (Author/NB)

  4. What is black hole?

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. What is black hole? Possible end phase of a star: A star is a massive, luminous ball of plasma having continuous nuclear burning. Star exhausts nuclear fuel →. White Dwarf, Neutron Star, Black Hole. Black hole's gravitational field is so powerful that even ...

  5. Genocide and Black Ecology

    Science.gov (United States)

    Sinnette, Calvin H.

    1972-01-01

    Contends that the survival of black people is in serious jeopardy as is evidenced in contemporary discussions on the worldwide plight of black people, and that an exhaustive study of the problem in its many dimensions is seriously lacking; the moral and ethical issues of genocide require examination from a black perspective. (JW)

  6. Software Defined Networking Demands on Software Technologies

    DEFF Research Database (Denmark)

    Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

    2015-01-01

    Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper......, we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges...

  7. The Design of the Orthogonal Box Cavity

    Energy Technology Data Exchange (ETDEWEB)

    Moretti, Alfred; /Fermilab

    2010-09-15

    The muon collider and/or the neutrino factory require large accelerating electric field gradients immersed in large (3 to 6 T) solenoidal magnetic fields for ionization cooling of muon beams. Our original vacuum breakdown study demonstrated a loss of achievable peak accelerating gradient in solenoidal magnetic fields by a factor 2 or greater. The Muon Collaboration has developed a theory of a method to suppress high electric field breakdown in vacuum cavities needed for a Muon collider or neutrino factory. It has been shown in our studies and by others that high gradient electric field emitted electrons (dark current) are the primary cause of breakdown. A DC magnetic field orthogonal to the RF electric accelerating field prevents dark current high field emitted electrons from traveling across the accelerating gap and then will prevent breakdown. We have decided to test this theory by building a special cavity in the shape of vacuum box. Figure 1 is a simplified view of the cavity design. The design is based on an 805 MHz WR975 waveguide cavity resonating in the TE{sub 101} mode. For the TE{sub 101} mode the resonant frequency f{sub 0} is given by the relationship f{sub 0} = c[(I/a){sup 2} + (m/b){sup 2} + (n/d){sup 2}]{sup 0.5}/2 where a and d are the lengths of the base sides and b is the height of the box in MKS units and c is the velocity of light.

  8. Flexible bulb large storage box hydrogen maser

    Science.gov (United States)

    Reinhardt, V.

    1973-01-01

    The principal limitation on the accuracy of the hydrogen maser as a primary frequency standard has been the irreproducibility of the frequency shift caused by collisions of the radiating atoms with the walls of the vessel containing them. The flexible bulb-large storage box hydrogen maser allows correction for this wall shift within a single device, sidestepping the reproducibility problem, and reducing the frequency error from the wall shift to the level imposed by the device's stability. The principles of the device are discussed including the flexible bulb technique and the complications caused by a multiple region storage bulb. The stability of the device is discussed including a comparison with an ordinary hydrogen maser. Data is presented from a working flexible bulb-large storage box hydrogen maser demonstrating the feasibility of the device and showing some of its operating characteristics. The flexibility of the device is demonstrated by showing how the device's added degrees of freedom allow measurement of parameters unmeasurable in an ordinary hydrogen maser.

  9. Black holes in binary stars

    NARCIS (Netherlands)

    Wijers, R.A.M.J.

    1996-01-01

    Introduction Distinguishing neutron stars and black holes Optical companions and dynamical masses X-ray signatures of the nature of a compact object Structure and evolution of black-hole binaries High-mass black-hole binaries Low-mass black-hole binaries Low-mass black holes Formation of black holes

  10. Social software in global software development

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Yvonne

    2010-01-01

    Social software (SoSo) is defined by Farkas as tools that (1) allow people to communicate, collaborate, and build community online (2) can be syndicated, shared, reused or remixed and (3) let people learn easily from and capitalize on the behavior and knowledge of others. [1]. SoSo include a wide...... variety of tools such as: instant messaging, internet forums, mailing lists, blogs, wikis, social network sites, social bookmarking, social libraries, virtual worlds. Though normally rather belonging to the private realm, the use of social software in corporate context has been reported, e.g. as a way...

  11. Software architecture evolution

    DEFF Research Database (Denmark)

    Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

    2008-01-01

    Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...... architecture. Following the early aspect paradigm, Tran SAT allows the software architect to design a software architecture stepwise in terms of aspects at the design stage. It realises the evolution as the weaving of new architectural aspects into an existing software architecture....

  12. Software engineering in industry

    Science.gov (United States)

    Story, C. M.

    1989-12-01

    Can software be "engineered"? Can a few people with limited resources and a negligible budget produce high quality software solutions to complex software problems? It is possible to resolve the conflict between research activities and the necessity to view software development as a means to an end rather than as an end in itself? The aim of this paper is to encourage further thought and discussion on various topics which, in the author's experience, are becoming increasingly critical in large current software production and development projects, inside and outside high energy physics (HEP). This is done by briefly exploring some of the software engineering ideas and technologies now used in the information industry, using, as a case-study, a project with many similarities to those currently under way in HEP.

  13. Software verification for nuclear industry

    International Nuclear Information System (INIS)

    Wilburn, N.P.

    1985-08-01

    Why verification of software products throughout the software life cycle is necessary is considered. Concepts of verification, software verification planning, and some verification methodologies for products generated throughout the software life cycle are then discussed

  14. A Group Action Method for Construction of Strong Substitution Box

    Science.gov (United States)

    Jamal, Sajjad Shaukat; Shah, Tariq; Attaullah, Atta

    2017-06-01

    In this paper, the method to develop cryptographically strong substitution box is presented which can be used in multimedia security and data hiding techniques. The algorithm of construction depends on the action of a projective general linear group over the set of units of the finite commutative ring. The strength of substitution box and ability to create confusion is assessed with different available analyses. Moreover, the ability of resistance against malicious attacks is also evaluated. The substitution box is examined by bit independent criterion, strict avalanche criterion, nonlinearity test, linear approximation probability test and differential approximation probability test. This substitution box is equated with well-recognized substitution boxes such as AES, Gray, APA, S8, prime of residue, Xyi and Skipjack. The comparison shows encouraging results about the strength of the proposed box. The majority logic criterion is also calculated to analyze the strength and its practical implementation.

  15. [Design and application of hand-wrist caring moxibustion box].

    Science.gov (United States)

    Gao, Xi-Yan; Wang, Xin; Xu, Cui-Xiang; Gao, Ling; Ma, Qiao-Lin

    2013-11-01

    A hand-wrist moxibustion box is designed to effectively solve difficulty to have moxibustion at handwrist joint and problem of bad moxibustion effect as well as improve heat efficiency of moxibustion. The device is consisted of a box and protective screening. The box is hollow with opening on top and bottom. A reversible cover is fixed on the top of the box and support frames are put in the inner-middle. On the side wall there is a hole that is at the same horizontal level of support frames, and horizontal protective screening is put on the bottom. The design of this moxibustion box is novel and unique, simple and reasonable, which could give moxibustion on hand and wrist at the same time. Also it is easily made with low cost, easy to use and favorable effect. It is an innovation on moxibustion box.

  16. Computer software configuration management

    International Nuclear Information System (INIS)

    Pelletier, G.

    1987-08-01

    This report reviews the basic elements of software configuration management (SCM) as defined by military and industry standards. Several software configuration management standards are evaluated given the requirements of the nuclear industry. A survey is included of available automated tools for supporting SCM activities. Some information is given on the experience of establishing and using SCM plans of other organizations that manage critical software. The report concludes with recommendations of practices that would be most appropriate for the nuclear power industry in Canada

  17. Software evolution and maintenance

    CERN Document Server

    Tripathy, Priyadarshi

    2014-01-01

    Software Evolution and Maintenance: A Practitioner's Approach is an accessible textbook for students and professionals, which collates the advances in software development and provides the most current models and techniques in maintenance.Explains two maintenance standards: IEEE/EIA 1219 and ISO/IEC14764Discusses several commercial reverse and domain engineering toolkitsSlides for instructors are available onlineInformation is based on the IEEE SWEBOK (Software Engineering Body of Knowledge)

  18. Software configuration management

    CERN Document Server

    Keyes, Jessica

    2004-01-01

    Software Configuration Management discusses the framework from a standards viewpoint, using the original DoD MIL-STD-973 and EIA-649 standards to describe the elements of configuration management within a software engineering perspective. Divided into two parts, the first section is composed of 14 chapters that explain every facet of configuration management related to software engineering. The second section consists of 25 appendices that contain many valuable real world CM templates.

  19. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  20. Software systems for astronomy

    CERN Document Server

    Conrad, Albert R

    2014-01-01

    This book covers the use and development of software for astronomy. It describes the control systems used to point the telescope and operate its cameras and spectrographs, as well as the web-based tools used to plan those observations. In addition, the book also covers the analysis and archiving of astronomical data once it has been acquired. Readers will learn about existing software tools and packages, develop their own software tools, and analyze real data sets.

  1. Software for microcircuit systems

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1978-10-01

    Modern Large Scale Integration (LSI) microcircuits are meant to be programed in order to control the function that they perform. The basics of microprograming and new microcircuits have already been discussed. In this course, the methods of developing software for these microcircuits are explored. This generally requires a package of support software in order to assemble the microprogram, and also some amount of support software to test the microprograms and to test the microprogramed circuit itself. 15 figures, 2 tables

  2. Essential software architecture

    CERN Document Server

    Gorton, Ian

    2011-01-01

    Job titles like ""Technical Architect"" and ""Chief Architect"" nowadays abound in software industry, yet many people suspect that ""architecture"" is one of the most overused and least understood terms in professional software development. Gorton's book tries to resolve this dilemma. It concisely describes the essential elements of knowledge and key skills required to be a software architect. The explanations encompass the essentials of architecture thinking, practices, and supporting technologies. They range from a general understanding of structure and quality attributes through technical i

  3. Solar Asset Management Software

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, Aaron [Ra Power Management, Inc., Oakland, CA (United States); Zviagin, George [Ra Power Management, Inc., Oakland, CA (United States)

    2016-09-30

    Ra Power Management (RPM) has developed a cloud based software platform that manages the financial and operational functions of third party financed solar projects throughout their lifecycle. RPM’s software streamlines and automates the sales, financing, and management of a portfolio of solar assets. The software helps solar developers automate the most difficult aspects of asset management, leading to increased transparency, efficiency, and reduction in human error. More importantly, our platform will help developers save money by improving their operating margins.

  4. Software evolution in prototyping

    OpenAIRE

    Berzins, V.; Qi, Lu

    1996-01-01

    This paper proposes a model of software changes for supporting the evolution of software prototypes. The software evolution steps are decomposed into primitive substeps that correspond to monotonic specification changes. This structure is used to rearrange chronological derivation sequences into structures containing only meaning-preserving changes. The authors indicate how this structure can be used to automatically combine different changes to a specification. A set of examples illustrates ...

  5. Gammasphere software development

    International Nuclear Information System (INIS)

    Piercey, R.B.

    1993-01-01

    Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere)

  6. Software engineering the current practice

    CERN Document Server

    Rajlich, Vaclav

    2011-01-01

    INTRODUCTION History of Software EngineeringSoftware PropertiesOrigins of SoftwareBirth of Software EngineeringThird Paradigm: Iterative ApproachSoftware Life Span ModelsStaged ModelVariants of Staged ModelSoftware Technologies Programming Languages and CompilersObject-Oriented TechnologyVersion Control SystemSoftware ModelsClass DiagramsUML Activity DiagramsClass Dependency Graphs and ContractsSOFTWARE CHANGEIntroduction to Software ChangeCharacteristics of Software ChangePhases of Software ChangeRequirements and Their ElicitationRequirements Analysis and Change InitiationConcepts and Concept

  7. Essence: Facilitating Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2008-01-01

      This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL......) – and a new method concept for software innovation – Essence – based on views, modes, and team roles. Finally, the paper reports from an early experiment using SIRL and Essence and identifies further research....

  8. Agile software development

    CERN Document Server

    Dingsoyr, Torgeir; Moe, Nils Brede

    2010-01-01

    Agile software development has become an umbrella term for a number of changes in how software developers plan and coordinate their work, how they communicate with customers and external stakeholders, and how software development is organized in small, medium, and large companies, from the telecom and healthcare sectors to games and interactive media. Still, after a decade of research, agile software development is the source of continued debate due to its multifaceted nature and insufficient synthesis of research results. Dingsoyr, Dyba, and Moe now present a comprehensive snapshot of the kno

  9. Software architecture 1

    CERN Document Server

    Oussalah , Mourad Chabane

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

  10. Software architecture 2

    CERN Document Server

    Oussalah, Mourad Chabanne

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

  11. Dtest Testing Software

    Science.gov (United States)

    Jain, Abhinandan; Cameron, Jonathan M.; Myint, Steven

    2013-01-01

    This software runs a suite of arbitrary software tests spanning various software languages and types of tests (unit level, system level, or file comparison tests). The dtest utility can be set to automate periodic testing of large suites of software, as well as running individual tests. It supports distributing multiple tests over multiple CPU cores, if available. The dtest tool is a utility program (written in Python) that scans through a directory (and its subdirectories) and finds all directories that match a certain pattern and then executes any tests in that directory as described in simple configuration files.

  12. Contractor Software Charges

    National Research Council Canada - National Science Library

    Granetto, Paul

    1994-01-01

    .... Examples of computer software costs that contractors charge through indirect rates are material management systems, security systems, labor accounting systems, and computer-aided design and manufacturing...

  13. Optimization of Antivirus Software

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The paper describes the main techniques used in development of computer antivirus software applications. For this particular category of software, are identified and defined optimum criteria that helps determine which solution is better and what are the objectives of the optimization process. From the general viewpoint of software optimization are presented methods and techniques that are applied at code development level. Regarding the particularities of antivirus software, the paper analyzes some of the optimization concepts applied to this category of applications

  14. Software as quality product

    International Nuclear Information System (INIS)

    Enders, A.

    1975-01-01

    In many discussions on the reliability of computer systems, software is presented as the weak link in the chain. The contribution attempts to identify the reasons for this situation as seen from the software development. The concepts correctness and reliability of programmes are explained as they are understood in the specialist discussion of today. Measures and methods are discussed which are particularly relevant as far as the obtaining of fault-free and reliable programmes is concerned. Conclusions are drawn for the user of software so that he is in the position to judge himself what can be justly expected frm the product software compared to other products. (orig./LH) [de

  15. Software quality assurance

    CERN Document Server

    Laporte, Claude Y

    2018-01-01

    This book introduces Software Quality Assurance (SQA) and provides an overview of standards used to implement SQA. It defines ways to assess the effectiveness of how one approaches software quality across key industry sectors such as telecommunications, transport, defense, and aerospace. * Includes supplementary website with an instructor's guide and solutions * Applies IEEE software standards as well as the Capability Maturity Model Integration for Development (CMMI) * Illustrates the application of software quality assurance practices through the use of practical examples, quotes from experts, and tips from the authors

  16. Decentralized Software Architecture

    National Research Council Canada - National Science Library

    Khare, Rohit

    2002-01-01

    .... While the term "decentralization" is familiar from political and economic contexts, it has been applied extensively, if indiscriminately, to describe recent trends in software architecture towards...

  17. Black hole levitron

    International Nuclear Information System (INIS)

    Arsiwalla, Xerxes D.; Verlinde, Erik P.

    2010-01-01

    We study the problem of spatially stabilizing four dimensional extremal black holes in background electric/magnetic fields. Whilst looking for stationary stable solutions describing black holes placed in external fields we find that taking a continuum limit of Denef et al.'s multicenter supersymmetric black hole solutions provides a supergravity description of such backgrounds within which a black hole can be trapped within a confined volume. This construction is realized by solving for a levitating black hole over a magnetic dipole base. We comment on how such a construction is akin to a mechanical levitron.

  18. Deep Cropping via Attention Box Prediction and Aesthetics Assessment

    OpenAIRE

    Wang, Wenguan; Shen, Jianbing

    2017-01-01

    We model the photo cropping problem as a cascade of attention box regression and aesthetic quality classification, based on deep learning. A neural network is designed that has two branches for predicting attention bounding box and analyzing aesthetics, respectively. The predicted attention box is treated as an initial crop window where a set of cropping candidates are generated around it, without missing important information. Then, aesthetics assessment is employed to select the final crop ...

  19. Grey-box modelling of pharmacokinetic/pharmacodynamic systems

    DEFF Research Database (Denmark)

    Tornøe, Christoffer Wenzel; Jacobsen, Judith L; Pedersen, Oluf

    2004-01-01

    Grey-box pharmacokinetic/pharmacodynamic (PK/PD) modelling is presented as a promising way of modelling PK/PD systems. The concept behind grey-box modelling is based on combining physiological knowledge along with information from data in the estimation of model parameters. Grey-box modelling con...... in order to describe the complicated in vivo system of insulin and glucose following an IVGTT....

  20. Construction and properties of Box-Behnken designs

    OpenAIRE

    Jo, Jinnam

    1992-01-01

    Box-Behnken designs are used to estimate parameters in a second-order response surface model (Box and Behnken, 1960). These designs are formed by combining ideas from incomplete block designs (BIBD or PBIBD) and factorial experiments, specifically 2k full or 2k-1 fractional factorials. In this dissertation, a more general mathematical formulation of the Box-Behnken method is provided, a general expression for the coefficient matrix in the least squares analysis for estimatin...

  1. Software Uncertainty in Integrated Environmental Modelling: the role of Semantics and Open Science

    Science.gov (United States)

    de Rigo, Daniele

    2013-04-01

    Computational aspects increasingly shape environmental sciences [1]. Actually, transdisciplinary modelling of complex and uncertain environmental systems is challenging computational science (CS) and also the science-policy interface [2-7]. Large spatial-scale problems falling within this category - i.e. wide-scale transdisciplinary modelling for environment (WSTMe) [8-10] - often deal with factors (a) for which deep-uncertainty [2,11-13] may prevent usual statistical analysis of modelled quantities and need different ways for providing policy-making with science-based support. Here, practical recommendations are proposed for tempering a peculiar - not infrequently underestimated - source of uncertainty. Software errors in complex WSTMe may subtly affect the outcomes with possible consequences even on collective environmental decision-making. Semantic transparency in CS [2,8,10,14,15] and free software [16,17] are discussed as possible mitigations (b) . Software uncertainty, black-boxes and free software. Integrated natural resources modelling and management (INRMM) [29] frequently exploits chains of nontrivial data-transformation models (D- TM), each of them affected by uncertainties and errors. Those D-TM chains may be packaged as monolithic specialized models, maybe only accessible as black-box executables (if accessible at all) [50]. For end-users, black-boxes merely transform inputs in the final outputs, relying on classical peer-reviewed publications for describing the internal mechanism. While software tautologically plays a vital role in CS, it is often neglected in favour of more theoretical aspects. This paradox has been provocatively described as "the invisibility of software in published science. Almost all published papers required some coding, but almost none mention software, let alone include or link to source code" [51]. Recently, this primacy of theory over reality [52-54] has been challenged by new emerging hybrid approaches [55] and by the

  2. Decision Support System for Evaluation of Gunnison River Flow Regimes With Respect To Resources of the Black Canyon of the Gunnison National Park

    Science.gov (United States)

    Auble, Gregor T.; Wondzell, Mark; Talbert, Colin

    2009-01-01

    This report describes and documents a decision support system for the Gunnison River in Black Canyon of the Gunnison National Park. It is a macro-embedded EXCEL program that calculates and displays indicators representing valued characteristics or processes in the Black Canyon based on daily flows of the Gunnison River. The program is designed to easily accept input from downloaded stream gage records or output from the RIVERWARE reservoir operations model being used for the upstream Aspinall Unit. The decision support system is structured to compare as many as eight alternative flow regimes, where each alternative is represented by a daily sequence of at least 20 calendar years of streamflow. Indicators include selected flow statistics, riparian plant community distribution, clearing of box elder by inundation and scour, several measures of sediment mobilization, trout fry habitat, and federal reserved water rights. Calculation of variables representing National Park Service federal reserved water rights requires additional secondary input files pertaining to forecast and actual basin inflows and storage levels in Blue Mesa reservoir. Example input files representing a range of situations including historical, reconstructed natural, and simulated alternative reservoir operations are provided with the software.

  3. Entropy bounds and the second law for black holes

    International Nuclear Information System (INIS)

    Bekenstein, J.D.

    1983-01-01

    A counterexample to the entropy bound proposed by Unruh and Wald and by Page is described. The bound states that the entropy S of any system with energy E and volume V cannot exceed the entropy of an equal volume and energy of unconfined thermal radiation. The bound is found to be violated by thermal field systems whose various dimensions differ by an order of magnitude or more, the violation occurring at intermediate energies. Unruh and Wald used the bound in an argument establishing the validity of the generalized second law when a box containing some entropy is lowered to near a black hole, then opened, and withdrawn open. If the box is thin in one direction, the failure of the bound for its contents makes it appear that a violation of the second law is possible. We show that, in fact, for a thin box the buoyancy effects on which Unruh and Wald's argument relies cancel out. As a result, the second law is fulfilled despite the failure of the bound. It appears from the second law that the bound must nevertheless hold when applied to box plus contents, but a direct proof of this is still lacking. We also consider the alternative entropy bound S< or =2πER/hc (2R is the largest dimension of the system) proposed earlier. For field systems it is shown to fail at very low energies, but to be valid for complete systems (i.e., box plus confined fields). Further, we show S< or =22[ER/hc is a necessary condition for fulfillment of the second law when a thin system is dropped into a black hole (even in the face of buoyancy) in the sense that if the bound failed, the law would be violated

  4. Software cost estimation

    NARCIS (Netherlands)

    Heemstra, F.J.; Heemstra, F.J.

    1993-01-01

    The paper gives an overview of the state of the art of software cost estimation (SCE). The main questions to be answered in the paper are: (1) What are the reasons for overruns of budgets and planned durations? (2) What are the prerequisites for estimating? (3) How can software development effort be

  5. UWB Tracking Software Development

    Science.gov (United States)

    Gross, Julia; Arndt, Dickey; Ngo, Phong; Phan, Chau; Dusl, John; Ni, Jianjun; Rafford, Melinda

    2006-01-01

    An Ultra-Wideband (UWB) two-cluster Angle of Arrival (AOA) tracking prototype system is currently being developed and tested at NASA Johnson Space Center for space exploration applications. This talk discusses the software development efforts for this UWB two-cluster AOA tracking system. The role the software plays in this system is to take waveform data from two UWB radio receivers as an input, feed this input into an AOA tracking algorithm, and generate the target position as an output. The architecture of the software (Input/Output Interface and Algorithm Core) will be introduced in this talk. The development of this software has three phases. In Phase I, the software is mostly Matlab driven and calls C++ socket functions to provide the communication links to the radios. This is beneficial in the early stage when it is necessary to frequently test changes in the algorithm. Phase II of the development is to have the software mostly C++ driven and call a Matlab function for the AOA tracking algorithm. This is beneficial in order to send the tracking results to other systems and also to improve the tracking update rate of the system. The third phase is part of future work and is to have the software completely C++ driven with a graphics user interface. This software design enables the fine resolution tracking of the UWB two-cluster AOA tracking system.

  6. Sustainability in Software Engineering

    NARCIS (Netherlands)

    Wolfram, N.J.E.; Lago, P.; Osborne, Francesco

    2017-01-01

    The intersection between software engineering research and issues related to sustainability and green IT has been the subject of increasing attention. In spite of that, we observe that sustainability is still not clearly defined, or understood, in the field of software engineering. This lack of

  7. Software evolution with XVCL

    DEFF Research Database (Denmark)

    Zhang, Weishan; Jarzabek, Stan; Zhang, Hongyu

    2004-01-01

    This chapter introduces software evolution with XVCL (XML-based Variant Configuration Language), which is an XML-based metaprogramming technique. As the software evolves, a large number of variants may arise, especially whtn such kinds of evolutions are related to multiple platforms as shown in our...

  8. Marketing Mix del Software.

    Directory of Open Access Journals (Sweden)

    Yudith del Carmen Rodríguez Pérez

    2006-03-01

    Por ello, en este trabajo se define el concepto de producto software, se caracteriza al mismo y se exponen sus atributos de calidad. Además, se aborda la mezcla de marketing del software necesaria y diferente a la de otros productos para que este triunfe en el mercado.

  9. ITOUGH2 software qualification

    Energy Technology Data Exchange (ETDEWEB)

    Finsterle, S.; Pruess, K.; Fraser, P.

    1996-10-01

    The purpose of this report is to provide all software baseline documents necessary for the software qualification of ITOUGH2. ITOUGH2 is a computer program providing inverse modeling capabilities for TOUGH2. TOUGH2 is a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media.

  10. Cactus: Software Priorities

    Science.gov (United States)

    Hyde, Hartley

    2009-01-01

    The early eighties saw a period of rapid change in computing and teachers lost control of how they used computers in their classrooms. Software companies produced computer tools that looked so good that teachers forgot about writing their own classroom materials and happily purchased software--that offered much more than teachers needed--from…

  11. Software engineering ethics

    Science.gov (United States)

    Bown, Rodney L.

    1991-01-01

    Software engineering ethics is reviewed. The following subject areas are covered: lack of a system viewpoint; arrogance of PC DOS software vendors; violation od upward compatibility; internet worm; internet worm revisited; student cheating and company hiring interviews; computing practitioners and the commodity market; new projects and old programming languages; schedule and budget; and recent public domain comments.

  12. Choreographies with Secure Boxes and Compromised Principals

    DEFF Research Database (Denmark)

    Carbone, Marco; Guttman, Joshua

    2009-01-01

      We equip choreography-level session descriptions with a simple abstraction of a security infrastruc- ture. Message components may be enclosed within (possibly nested) ”boxes” annotated with the intended source and destination of those components. The boxes are to be implemented with cryp......- tography. Strand spaces provide a semantics for these choreographies, in which some roles may be played by compromised principals. A skeleton is a partially ordered structure containing local behaviors (strands) executed by regular (non-compromised) principals. A skeleton is realized if it contains enough...... it embeds. Second, if no step is possible from a skeleton A, then A is DG realized. Finally, if a DG realized A′ is accessible from A, then A′ is minimal. Thus, the transition system provides a systematic way to construct the possible behaviors of the choreography, in the presence of compromised principals.  ...

  13. Software architecture evolution

    DEFF Research Database (Denmark)

    Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

    2008-01-01

    Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...

  14. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  15. Trends in software testing

    CERN Document Server

    Mohanty, J; Balakrishnan, Arunkumar

    2017-01-01

    This book is focused on the advancements in the field of software testing and the innovative practices that the industry is adopting. Considering the widely varied nature of software testing, the book addresses contemporary aspects that are important for both academia and industry. There are dedicated chapters on seamless high-efficiency frameworks, automation on regression testing, software by search, and system evolution management. There are a host of mathematical models that are promising for software quality improvement by model-based testing. There are three chapters addressing this concern. Students and researchers in particular will find these chapters useful for their mathematical strength and rigor. Other topics covered include uncertainty in testing, software security testing, testing as a service, test technical debt (or test debt), disruption caused by digital advancement (social media, cloud computing, mobile application and data analytics), and challenges and benefits of outsourcing. The book w...

  16. Software licenses: Stay honest!

    CERN Multimedia

    Computer Security Team

    2012-01-01

    Do you recall our article about copyright violation in the last issue of the CERN Bulletin, “Music, videos and the risk for CERN”? Now let’s be more precise. “Violating copyright” not only means the illegal download of music and videos, it also applies to software packages and applications.   Users must respect proprietary rights in compliance with the CERN Computing Rules (OC5). Not having legitimately obtained a program or the required licenses to run that software is not a minor offense. It violates CERN rules and puts the Organization at risk! Vendors deserve credit and compensation. Therefore, make sure that you have the right to use their software. In other words, you have bought the software via legitimate channels and use a valid and honestly obtained license. This also applies to “Shareware” and software under open licenses, which might also come with a cost. Usually, only “Freeware” is complete...

  17. Software quality in 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jones, C. [Software Productivity Research, Inc., Burlington, MA (United States)

    1997-11-01

    For many years, software quality assurance lagged behind hardware quality assurance in terms of methods, metrics, and successful results. New approaches such as Quality Function Deployment (QFD) the ISO 9000-9004 standards, the SEI maturity levels, and Total Quality Management (TQM) are starting to attract wide attention, and in some cases to bring software quality levels up to a parity with manufacturing quality levels. Since software is on the critical path for many engineered products, and for internal business systems as well, the new approaches are starting to affect global competition and attract widespread international interest. It can be hypothesized that success in mastering software quality will be a key strategy for dominating global software markets in the 21st century.

  18. Software safety hazard analysis

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    1996-02-01

    Techniques for analyzing the safety and reliability of analog-based electronic protection systems that serve to mitigate hazards in process control systems have been developed over many years, and are reasonably well understood. An example is the protection system in a nuclear power plant. The extension of these techniques to systems which include digital computers is not well developed, and there is little consensus among software engineering experts and safety experts on how to analyze such systems. One possible technique is to extend hazard analysis to include digital computer-based systems. Software is frequently overlooked during system hazard analyses, but this is unacceptable when the software is in control of a potentially hazardous operation. In such cases, hazard analysis should be extended to fully cover the software. A method for performing software hazard analysis is proposed in this paper

  19. Revisiting software ecosystems research

    DEFF Research Database (Denmark)

    Manikas, Konstantinos

    2016-01-01

    Software ecosystems’ is argued to first appear as a concept more than 10 years ago and software ecosystem research started to take off in 2010. We conduct a systematic literature study, based on the most extensive literature review in the field up to date, with two primarily aims: (a) to provide...... an updated overview of the field and (b) to document evolution in the field. In total, we analyze 231 papers from 2007 until 2014 and provide an overview of the research in software ecosystems. Our analysis reveals a field that is rapidly growing both in volume and empirical focus while becoming more mature...... from evolving. We propose means for future research and the community to address them. Finally, our analysis shapes the view of the field having evolved outside the existing definitions of software ecosystems and thus propose the update of the definition of software ecosystems....

  20. Anatomically detailed and large-scale simulations studying synapse loss and synchrony using NeuroBox

    Directory of Open Access Journals (Sweden)

    Markus eBreit

    2016-02-01

    Full Text Available The morphology of neurons and networks plays an important role in processing electrical and biochemical signals. Based on neuronal reconstructions, which are becoming abundantly available through databases such as NeuroMorpho.org, numerical simulations of Hodgkin-Huxley-type equations, coupled to biochemical models, can be performed in order to systematically investigate the influence of cellular morphology and the connectivity pattern in networks on the underlying function. Development in the area of synthetic neural network generation and morphology reconstruction from microscopy data has brought forth the software tool NeuGen. Coupling this morphology data (either from databases, synthetic or reconstruction to the simulation platform UG 4 (which harbors a neuroscientific portfolio and VRL-Studio, has brought forth the extendible toolbox NeuroBox. NeuroBox allows users to perform numerical simulations on hybrid-dimensional morphology representations. The code basis is designed in a modular way, such that e.g. new channel or synapse types can be added to the library. Workflows can be specified through scripts or through the VRL-Studio graphical workflow representation. Third-party tools, such as ImageJ, can be added to NeuroBox workflows. In this paper, NeuroBox is used to study the electrical and biochemical effects of synapse loss vs. synchrony in neurons, to investigate large morphology data sets within detailed biophysical simulations, and used to demonstrate the capability of utilizing high-performance computing infrastructure for large scale network simulations. Using new synapse distribution methods and Finite Volume based numerical solvers for compartment-type models, our results demonstrate how an increase in synaptic synchronization can compensate synapse loss at the electrical and calcium level, and how detailed neuronal morphology can be integrated in large-scale network simulations.