75 FR 59041 - Migratory Bird Hunting; Migratory Bird Hunting Regulations on Certain Federal Indian Reservations...

Science.gov (United States)

2010-09-24

... or more on the economy or adversely affect an economic sector, productivity, jobs, the environment... annual effect on the economy of $100 million or more. However, because this rule establishes hunting..., Arizona (Tribal Members and Nontribal Hunters). Doves Season Dates: Open September 1 through 15, 2010...

78 FR 21199 - Migratory Bird Hunting; Proposed 2013-14 Migratory Game Bird Hunting Regulations (Preliminary...

Science.gov (United States)

2013-04-09

..., Mississippi, Central, and Pacific) has a Flyway Council, a formal organization generally composed of one... Hunting Regulations (Preliminary) in this document. We published definitions of waterfowl flyways and... process must allow for public participation and an open exchange of ideas. We have developed this rule in...

78 FR 52337 - Migratory Bird Hunting; Proposed Frameworks for Late-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2013-08-22

... selection of the appropriate hunting regulations. Status of Geese and Swans We provide information on the... in the June 14, 2013, Federal Register. D. Special Seasons/Species Management iii. Black Ducks... the International Black Duck AHM Strategy for 2013-14. Service Response: Last year, we adopted the...

78 FR 58123 - Migratory Bird Hunting; Final Frameworks for Late-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2013-09-20

... we may be approaching the limits of social acceptance for the use of hunting to control the number of... Regulatory Flexibility Act section below). This analysis estimated consumer surplus for three alternatives... Alternative 3, with an estimated consumer surplus across all flyways of $317.8-$416.8 million. We also chose...

77 FR 42919 - Migratory Bird Hunting; Proposed Frameworks for Early-Season Migratory Bird Hunting Regulations...

Science.gov (United States)

2012-07-20

... (canvasbacks, pintails, black ducks, and scaup), those strategies will again be used for the 2012-13 hunting... (e.g., tundra swans, some sandhill crane populations), the Service determines the amount of harvest... Vol. 77 Friday, No. 140 July 20, 2012 Part V Department of the Interior Fish and Wildlife Service...

76 FR 44729 - Migratory Bird Hunting; Proposed Frameworks for Early-Season Migratory Bird Hunting Regulations...

Science.gov (United States)

2011-07-26

...- 2010 average (3.4 0.03 million). As expected, residual water from summer 2010 precipitation remained in... preliminary 2010 Migratory Bird Harvest Information Program (HIP) estimate of harvest was 84,900 birds. In... trend in the population indices between 1966 and 2010. According to HIP surveys, the preliminary harvest...

77 FR 58443 - Migratory Bird Hunting; Final Frameworks for Late-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2012-09-20

... to move toward a more holistic and uniform approach to Canada goose harvest management across the... selections to: Chief, Division of Migratory Bird Management, U.S. Fish and Wildlife Service, ms MBSP-4107... address above, or from the Division of Migratory Bird Management's Web site at http://www.fws.gov...

75 FR 47681 - Migratory Bird Hunting; Proposed Migratory Bird Hunting Regulations on Certain Federal Indian...

Science.gov (United States)

2010-08-06

... million). Residual water remains in the Parklands and these were classified as fair to good. Most of the... stabilized at around 100,000 birds; the preliminary 2009 Migratory Bird Harvest Information Program (HIP... and 2009. According to HIP surveys, the preliminary harvest estimate for 2009 was 66,100 white-winged...

Lead shot from hunting as a source of lead in human blood

International Nuclear Information System (INIS)

Johansen, Poul; Pedersen, Henning Sloth; Asmund, Gert; Riget, Frank

2006-01-01

This study investigates the relationship between the intake of birds hunted with lead shot and the lead concentration in human blood. Fifty adult men from Nuuk, Greenland took part in the study. From September 2003 to June 2004 they regularly gave blood samples and recorded how many birds they ate. We found a clear relationship between the number of bird meals and blood lead and also a clear seasonal variation. The concentration was highest in mid-winter when bird consumption is at its highest. Blood lead was low (15 μg/L, mean concentration) among the participants reporting not eating birds. Among those reporting to eat birds regularly, blood lead was significantly higher, up to 128 μg/L (mean concentration). Concentrations depended on the frequency of bird meals: the more the bird meals, the higher the resulting blood lead. This clear relationship points to lead shot as the dominating lead source to people in Greenland. - Birds hunted with lead shot and consumed are a source of lead in human blood

Lead shot from hunting as a source of lead in human blood

Energy Technology Data Exchange (ETDEWEB)

Johansen, Poul [National Environmental Research Institute, Frederiksborgvej 399, DK-4000 Roskilde (Denmark)]. E-mail: poj@dmu.dk; Pedersen, Henning Sloth [Primary Health Care Center, DK-3900 Nuuk (Greenland); Asmund, Gert [National Environmental Research Institute, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Riget, Frank [National Environmental Research Institute, Frederiksborgvej 399, DK-4000 Roskilde (Denmark)

2006-07-15

This study investigates the relationship between the intake of birds hunted with lead shot and the lead concentration in human blood. Fifty adult men from Nuuk, Greenland took part in the study. From September 2003 to June 2004 they regularly gave blood samples and recorded how many birds they ate. We found a clear relationship between the number of bird meals and blood lead and also a clear seasonal variation. The concentration was highest in mid-winter when bird consumption is at its highest. Blood lead was low (15 {mu}g/L, mean concentration) among the participants reporting not eating birds. Among those reporting to eat birds regularly, blood lead was significantly higher, up to 128 {mu}g/L (mean concentration). Concentrations depended on the frequency of bird meals: the more the bird meals, the higher the resulting blood lead. This clear relationship points to lead shot as the dominating lead source to people in Greenland. - Birds hunted with lead shot and consumed are a source of lead in human blood.

Palestine Saw-scaled Vipers hunt disadvantaged avian migrants.

Science.gov (United States)

Yosef, Reuven; Zduniak, Piotr

2015-11-01

The selection of an ambush-cum-foraging site and proper prey are indispensable for maintaining an adequate energy intake by sit-and-wait predators to optimize survival and future fitness. This is important for snakes, where an ambush site has suitable ambience. We studied the foraging strategy of the Palestine Saw-scaled Viper (Echis coloratus) at an avian migratory stopover site. Following initial observations, we hypothesized that vipers are able to discern the body mass of a perched bird and hunt accordingly. We implemented an experiment where vipers chose between four groups of migratory Blackcaps with different body mass. Prey choice by vipers of both age classes was not random and adults focused on Blackcaps with the lightest body mass. Juveniles displayed a variability of prey choice but selected mainly birds from the lightest categories. We concluded that Saw-scaled Vipers hunt prey based on thermal cues; juveniles practice on different prey groups prior to perfecting their foraging techniques i.e., hunting is a learned process; and that they prefer birds with the lowest body mass. The last because Blackcaps, when on migration, save energy by entering a state of deep torpor in which they sacrifice their vigilance capabilities. Copyright © 2015 Elsevier B.V. All rights reserved.

Minerals on postage stamps: A mix of art, history, economics and geography

Science.gov (United States)

Glover, Paul

2010-05-01

Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

50 CFR 32.3 - What are the procedures for publication of refuge-specific hunting regulations?

Science.gov (United States)

2010-10-01

... and publication of the opening of a wildlife refuge area to migratory game bird, upland game or big game hunting. (b) Refuge-specific hunting regulations may contain the following items: (1) Wildlife... FISHING General Provisions § 32.3 What are the procedures for publication of refuge-specific hunting...

50 CFR 20.62 - Importation of birds of another.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Importation of birds of another. 20.62... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Importations § 20.62 Importation of birds of another. No person shall import migratory game birds belonging to another person. ...

50 CFR 32.2 - What are the requirements for hunting on areas of the National Wildlife Refuge System?

Science.gov (United States)

2010-10-01

... migratory game bird, upland game, and big game hunting appear in §§ 32.20 through 32.72. (g) The use of any... HUNTING AND FISHING General Provisions § 32.2 What are the requirements for hunting on areas of the...

77 FR 53117 - Migratory Bird Hunting; Final Frameworks for Early-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2012-08-30

...- tailed pigeons. 16. Mourning Doves Council Recommendations: The Atlantic and Mississippi Flyway Councils... of mourning doves, resulting in a 70-day season and 15-bird daily bag limit. The daily bag limit could be composed of mourning doves and white-winged doves, singly or in combination. The Mississippi...

50 CFR 20.42 - Transportation of birds of another.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Transportation of birds of another. 20.42... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Transportation Within the United States § 20.42 Transportation of birds of another. No person shall transport migratory game birds belonging to another person...

78 FR 58233 - Migratory Bird Hunting; Migratory Bird Hunting Regulations on Certain Federal Indian Reservations...

Science.gov (United States)

2013-09-23

... a primary emphasis on such species as mourning and white-winged dove. Late seasons begin about... migratory bird surveys and assigned the following OMB control numbers: 1018-0010--Mourning Dove Call Count... bag limit is 10 mourning or white-winged doves, singly, or in the aggregate. For the late season, the...

50 CFR 20.37 - Custody of birds of another.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Custody of birds of another. 20.37 Section... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Possession § 20.37 Custody of birds of another. No person shall receive or have in custody any migratory game birds belonging to another person unless such...

78 FR 45375 - Migratory Bird Hunting; Proposed Frameworks for Early-Season Migratory Bird Hunting Regulations...

Science.gov (United States)

2013-07-26

... heard per route from the Mourning Dove Call-count Survey (CCS), doves seen per route from the CCS, birds... recovery and harvest data. Harvest and hunter participation are estimated from the HIP. The CCS-heard data... management units. Over the long term, trends based on CCS-heard and CCS-seen data were consistent in the CMU...

50 CFR 20.40 - Gift of migratory game birds.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Gift of migratory game birds. 20.40... (CONTINUED) TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Possession § 20.40 Gift of migratory game birds. No...

50 CFR 20.25 - Wanton waste of migratory game birds.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Wanton waste of migratory game birds. 20... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Taking § 20.25 Wanton waste of migratory game birds. No person shall kill or cripple any migratory game bird pursuant to this part without...

Songbirds and Birds of Prey, Unit 6, Colorado Division of Wildlife.

Science.gov (United States)

Hooper, Jon K.; Smith, Dwight R.

This booklet on songbirds and birds of prey is part of a series developed to encourage youth to pursue environmental projects. The manual explains bird anatomy and physiology, bird watching, types of feeders and shelter, and bird identification. Descriptions of feeding, hunting, and nesting habits are given for many species of birds. Also,…

An application and extension of the constraints–effects–mitigation model to Minnesota waterfowl hunting

Science.gov (United States)

Schroeder, Susan A.; Fulton, David C.; Lawrence, Jeffrey S.; Cordts, Steven D.

2012-01-01

This study extends modeling work on the leisure constraint negotiation process from physically active leisure and celebrity fandom to hunting. We test a model derived from the constraints–effects–mitigation model of leisure participation. The model is examined in the context of continued Minnesota waterfowl hunting among a sample of Minnesota residents who purchased a North Dakota waterfowl stamp. Results are from a mail survey conducted in 2006. In our modeling, successful constraint negotiation fully mediated the constraints–participation relationship, while involvement had both direct and indirect effects on participation. Hunter motivation was positively related to involvement. Results advance understanding of the relationships among factors that influence leisure participation, and suggest that constraint negotiation may differ among recreation activities with different participant profiles.

Olfaction in bird dogs during hunting.

Science.gov (United States)

Steen, J B; Mohus, I; Kvesetberg, T; Walløe, L

1996-05-01

The ability to catch scent continuously while running, which may be an essential skill for many animals of prey, requires that ambient air flows inward through the nose also during expiration. In this study on bird dogs, the direction of air flow was detected by measuring the temperature in the air inside the nostril. While resting, nose ventilation was synchronous with lung ventilation. While searching for ground scent, the dog was sniffing at a frequency of up to 200 s-1, a strategy which may create turbulence in the nasal passages and thereby enhance transport of scent molecules to the receptors in the ethmoidal cavity. When the bird dog was searching for game while running with its head high against the wind, it maintained a continuous inward air stream through the nose for up to 40s spanning at least 30 respiratory cycles. We suggest that expiratory gas flowing at high velocity from the trachea to the mouth cavity creates a lower pressure than in the nose thus causing an inward air stream through the nose during expiration by a Bernoulli effect.

ANCIENT BREAD STAMPS FROM JORDAN

OpenAIRE

Kakish, Randa

2014-01-01

Marking bread was an old practice performed in different parts of the old world. It was done for religious, magical, economic and identification purposes. Bread stamps differ from other groups of stamps. Accordingly, the aim of this article is to identify such stamps, displayed or stored, in a number of Jordanian Archaeological Museums. A col-lection of twelve ancient bread stamps were identified and studied. Two of the stamps were of unknown provenance while the others came from al-Shuneh, D...

Avian influenza prevalence among hunter-harvested birds in a remote Canadian First Nation community.

Science.gov (United States)

Liberda, Eric N; Meldrum, Richard; Charania, Nadia A; Davey, Robert; Tsuji, Leonard Js

2017-01-01

Avian influenza virus (AIV) prevalence has been associated with wild game and other bird species. The contamination of these birds may pose a greater risk to those who regularly hunt and consumed infected species. Due to resident concerns communicated by local Band Council, hunter-harvested birds from a remote First Nation community in subArctic Ontario, Canada were assessed for AIV. Hunters, and especially those who live a subsistence lifestyle, are at higher risk of AIV exposure due to their increased contact with wild birds, which represent an important part of their diet. Cloacal swabs from 304 harvested game birds representing several species of wild birds commonly hunted and consumed in this First Nation community were analyzed for AIV using real-time reverse transcription polymerase chain reaction. Subtyping was performed using reverse transcription polymerase chain reaction. Sequences were assembled using Lasergene, and the sequences were compared to Genbank. In total, 16 of the 304 cloacal swab samples were positive for AIV. Of the 16 positive samples, 12 were found in mallard ducks, 3 were found in snow geese (wavies), and 1 positive sample was found in partridge. The AIV samples were subtyped, when possible, and found to be positive for the low pathogenic avian influenza virus subtypes H3 and H4. No samples were positive for subtypes of human concern, namely H5 and H7. This work represents the first AIV monitoring program results of hunter-harvested birds in a remote subsistence First Nation community. Community-level surveillance of AIV in remote subsistence hunting communities may help to identify future risks, while educating those who may have the highest exposure about proper handling of hunted birds. Ultimately, only low pathogenic strains of AIV were found, but monitoring should be continued and expanded to safeguard those with the highest exposure risk to AIV.

Quantifying the scale and socioeconomic drivers of bird hunting in Central African forest communities

NARCIS (Netherlands)

Whytock, Robin C.; Morgan, Bethan J.; Awa, Taku; Bekokon, Zacharie; Abwe, Ekwoge A.; Buij, Ralph; Virani, Munir; Vickery, Juliet A.; Bunnefeld, Nils

2018-01-01

Global biodiversity is threatened by unsustainable exploitation for subsistence and commerce, and tropical forests are facing a hunting crisis. In Central African forests, hunting pressure has been quantified by monitoring changes in the abundance of affected species and by studying wild meat

Hunting or habitat? Drivers of waterbird abundance and community structure in agricultural wetlands of southern India.

Science.gov (United States)

Ramachandran, Ramesh; Kumar, Ajith; Gopi Sundar, Kolla S; Bhalla, Ravinder Singh

2017-09-01

The relative impacts of hunting and habitat on waterbird community were studied in agricultural wetlands of southern India. We surveyed wetlands to document waterbird community, and interviewed hunters to document hunting intensity, targeted species, and the motivations for hunting. Our results show that hunting leads to drastic declines in waterbird diversity and numbers, and skew the community towards smaller species. Hunting intensity, water spread, and vegetation cover were the three most important determinants of waterbird abundance and community structure. Species richness, density of piscivorous species, and medium-sized species (31-65 cm) were most affected by hunting. Out of 53 species recorded, 47 were hunted, with a preference for larger birds. Although illegal, hunting has increased in recent years and is driven by market demand. This challenges the widely held belief that waterbird hunting in India is a low intensity, subsistence activity, and undermines the importance of agricultural wetlands in waterbird conservation.

Rapid thermal processing by stamping

Science.gov (United States)

Stradins, Pauls; Wang, Qi

2013-03-05

A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

Lead Poisoning in Wild Birds

Science.gov (United States)

Lahner, Lesanna L.; Franson, J. Christian

2009-01-01

Lead in its various forms has been used for thousands of years, originally in cooking utensils and glazes and more recently in many industrial and commercial applications. However, lead is a potent, potentially deadly toxin that damages many organs in the body and can affect all animals, including humans. By the mid 1990s, lead had been removed from many products in the United States, such as paint and fuel, but it is still commonly used in ammunition for hunting upland game birds, small mammals, and large game animals, as well as in fishing tackle. Wild birds, such as mourning doves, bald eagles, California condors, and loons, can die from the ingestion of one lead shot, bullet fragment, or sinker. According to a recent study on loon mortality, nearly half of adult loons found sick or dead during the breeding season in New England were diagnosed with confirmed or suspected lead poisoning from ingestion of lead fishing weights. Recent regulations in some states have restricted the use of lead ammunition on certain upland game hunting areas, as well as lead fishing tackle in areas frequented by common loons and trumpeter swans. A variety of alternatives to lead are available for use in hunting, shooting sports, and fishing activities.

Evolutions of Advanced Stamping CAE -- Technology Adventures and Business Impact on Automotive Dies and Stamping

International Nuclear Information System (INIS)

Wang Chuantao

2005-01-01

In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness) (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines) (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping

Evolutions of Advanced Stamping CAE — Technology Adventures and Business Impact on Automotive Dies and Stamping

Science.gov (United States)

Wang, Chuantao (C. T.)

2005-08-01

In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness), (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines), (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping.

Stamp Verification for Automated Document Authentication

DEFF Research Database (Denmark)

Micenková, Barbora; van Beusekom, Joost; Shafait, Faisal

Stamps, along with signatures, can be considered as the most widely used extrinsic security feature in paper documents. In contrast to signatures, however, for stamps little work has been done to automatically verify their authenticity. In this paper, an approach for verification of color stamps ...... and copied stamps. Sensitivity and specificity of up to 95% could be obtained on a data set that is publicly available....

Non-random foraging in certain bird pests of field crops

Indian Academy of Sciences (India)

tribpo

a parakeet harvests less food and invests more time on vigilance. Feeding ... avoid it, can affect the time and energy budget of a feeding bird (Bertram 1980; ... Price P W 1975 Insect ecology (New York: John Wiley). Rudebeck G 1951 The choice of prey and modes of hunting of predatory birds with special reference.

50 CFR 20.109 - Extended seasons, limits, and hours for taking migratory game birds by falconry.

Science.gov (United States)

2010-10-01

... taking migratory game birds by falconry. 20.109 Section 20.109 Wildlife and Fisheries UNITED STATES FISH..., PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING... taking migratory game birds by falconry. This section provides annual regulations by which falconers may...

Usage and Recall of the Food Stamp Office Resource Kit (FSORK) by Food Stamp Applicants in 4 California Counties

Science.gov (United States)

Ghirardelli, Alyssa; Linares, Amanda; Fong, Amy

2011-01-01

Objective: To evaluate recall and usage of the Food Stamp Office Resource Kit (FSORK), a set of nutrition education materials designed for use in food stamp offices. Design: Client intercept exit surveys, an environmental scan, and individual observations of clients in the food stamp office. Setting: Four food stamp offices in California.…

Identifying key conservation threats to Alpine birds through expert knowledge

Science.gov (United States)

Pedrini, Paolo; Brambilla, Mattia; Rolando, Antonio; Girardello, Marco

2016-01-01

Alpine biodiversity is subject to a range of increasing threats, but the scarcity of data for many taxa means that it is difficult to assess the level and likely future impact of a given threat. Expert opinion can be a useful tool to address knowledge gaps in the absence of adequate data. Experts with experience in Alpine ecology were approached to rank threat levels for 69 Alpine bird species over the next 50 years for the whole European Alps in relation to ten categories: land abandonment, climate change, renewable energy, fire, forestry practices, grazing practices, hunting, leisure, mining and urbanization. There was a high degree of concordance in ranking of perceived threats among experts for most threat categories. The major overall perceived threats to Alpine birds identified through expert knowledge were land abandonment, urbanization, leisure and forestry, although other perceived threats were ranked highly for particular species groups (renewable energy and hunting for raptors, hunting for gamebirds). For groups of species defined according to their breeding habitat, open habitat species and treeline species were perceived as the most threatened. A spatial risk assessment tool based on summed scores for the whole community showed threat levels were highest for bird communities of the northern and western Alps. Development of the approaches given in this paper, including addressing biases in the selection of experts and adopting a more detailed ranking procedure, could prove useful in the future in identifying future threats, and in carrying out risk assessments based on levels of threat to the whole bird community. PMID:26966659

Identifying key conservation threats to Alpine birds through expert knowledge

Directory of Open Access Journals (Sweden)

Dan E. Chamberlain

2016-02-01

Full Text Available Alpine biodiversity is subject to a range of increasing threats, but the scarcity of data for many taxa means that it is difficult to assess the level and likely future impact of a given threat. Expert opinion can be a useful tool to address knowledge gaps in the absence of adequate data. Experts with experience in Alpine ecology were approached to rank threat levels for 69 Alpine bird species over the next 50 years for the whole European Alps in relation to ten categories: land abandonment, climate change, renewable energy, fire, forestry practices, grazing practices, hunting, leisure, mining and urbanization. There was a high degree of concordance in ranking of perceived threats among experts for most threat categories. The major overall perceived threats to Alpine birds identified through expert knowledge were land abandonment, urbanization, leisure and forestry, although other perceived threats were ranked highly for particular species groups (renewable energy and hunting for raptors, hunting for gamebirds. For groups of species defined according to their breeding habitat, open habitat species and treeline species were perceived as the most threatened. A spatial risk assessment tool based on summed scores for the whole community showed threat levels were highest for bird communities of the northern and western Alps. Development of the approaches given in this paper, including addressing biases in the selection of experts and adopting a more detailed ranking procedure, could prove useful in the future in identifying future threats, and in carrying out risk assessments based on levels of threat to the whole bird community.

E-Commerce-Objected E-Stamp Systems

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

Boosting e-stamp's advantages are conduced to promote logistics to go forward and help postal departments to improve the quality of service, many other businesses add-valued can be developed in e-stamp systems. This paper analyzeds, designs e-commerce-objected e-stamp system, and discusseds crucial technologies involved in detail.

Fabrication of Nanoimprint stamps for photonic crystals

International Nuclear Information System (INIS)

Kouba, J; Kubenz, M; Mai, A; Ropers, G; Eberhardt, W; Loechel, B

2006-01-01

We report on fabrication of nanoimprint stamps for fabrication of two dimensional photonic crystals in visible range of spectra. Nanoimprint stamps made of silicon and/or nickel were successfully fabricated using electron beam lithography and advanced dry etching techniques. The quality of the stamps was evaluated using scanning electron microscopy. The fabricated stamps were also evaluated by imprinting them into suitable polymer materials

50 CFR 10.13 - List of Migratory Birds.

Science.gov (United States)

2010-10-01

... Protection of Migratory Birds, August 16, 1916, United States-Great Britain (on behalf of Canada), 39 Stat..., Gallinago stenura Swinhoe's, Gallinago megala Wilson's, Gallinago delicata (the “common” snipe hunted in..., Spizella pusilla Five-striped, Aimophila quinquestriata Fox, Passerella iliaca Golden-crowned, Zonotrichia...

Hunting pressure on cracids (Cracidae: Aves in forest concessions in Peru

Directory of Open Access Journals (Sweden)

Javier Barrio

2011-08-01

Full Text Available The impact of timber exploitation on biodiversity is usually increased by hunting in the exploited area. Proper forest management practices on areas under commercial exploitation minimize hunting and damage to the forest. Large species of Cracidae, the most endangered family of birds in the Neotropics, are among the first to be affected in a Neotropical forest damaged by timber-extraction activities, and where at least moderate hunting occurs. Herein an assessment of cracids is carried out in three areas with selective logging in Peru in 2004 and 2005, is used to evaluate hunting pressure. Tree inventory trails were used as transects, and density was calculated using the line transect methodology. Four species of cracids were evaluated, and density was calculated for three of them. The area with lower hunting pressure, Maderyja, showed higher cracid diversity and was the only with the presence of razor-billed curassows (Mitu tuberosum and blue-throated pining-guans (Pipile cumanensis, two sought-after prey species. Areas where hunting intensity is higher had lower cracid diversity. The density of the M. tuberosum was high in Maderyja: 11.3 ind/km2 (95% CI: 7.4 – 17.3 ind/km2. In contrast, Spix’s guan (Penelope jacquacu did not show a marked difference among areas, unless compared to heavily hunted sites. The higher diversity of cracids and the density found for razor-billed curassows suggests Maderyja had low hunting pressure in the past and is properly managed towards wildlife. Currently, the Peruvian Amazon is being opened for forestry concessions and hydrocarbons exploitation and proper management towards wildlife is necessary to guarantee the conservation of susceptible taxa such as cracids.

Wind power and bird kills

International Nuclear Information System (INIS)

Raynolds, M.

1998-01-01

The accidental killing of birds by wind generators, and design improvements in the towers that support the turbines that might cut down on the bird killings were discussed. The first problem for the industry began in the late 1980s when the California Energy Commission reported as many as 160 birds (the majority being raptors, including the protected golden eagle) killed in one year in the vicinity of wind power plants. The key factor identified was the design of the towers as birds of prey are attracted to lattice towers as a place to hunt from. Tubular towers do not provide a place for the birds to perch, therefore they reduce the potential for bird strikes. Bird strikes also have been reported in Spain and the siting of the towers have been considered as the principal cause of the bird strikes. In view of these incidents, the wind power industry is developing standards for studying the potential of bird strikes and is continuing to study bird behaviour leading to collisions, the impact of topography, cumulative impacts and new techniques to reduce bird strikes. Despite the reported incidents, the risk of bird strikes by wind turbines, compared to other threats to birds such as pollution, oil spills, and other threats from fossil and nuclear fuels, is considered to be negligible. With continuing efforts to minimize incidents by proper design and siting, wind power can continue to grow as an environmentally sound and efficient source of energy

Wind power and bird kills

Energy Technology Data Exchange (ETDEWEB)

Raynolds, M.

1998-12-01

The accidental killing of birds by wind generators, and design improvements in the towers that support the turbines that might cut down on the bird killings were discussed. The first problem for the industry began in the late 1980s when the California Energy Commission reported as many as 160 birds (the majority being raptors, including the protected golden eagle) killed in one year in the vicinity of wind power plants. The key factor identified was the design of the towers as birds of prey are attracted to lattice towers as a place to hunt from. Tubular towers do not provide a place for the birds to perch, therefore they reduce the potential for bird strikes. Bird strikes also have been reported in Spain and the siting of the towers have been considered as the principal cause of the bird strikes. In view of these incidents, the wind power industry is developing standards for studying the potential of bird strikes and is continuing to study bird behaviour leading to collisions, the impact of topography, cumulative impacts and new techniques to reduce bird strikes. Despite the reported incidents, the risk of bird strikes by wind turbines, compared to other threats to birds such as pollution, oil spills, and other threats from fossil and nuclear fuels, is considered to be negligible. With continuing efforts to minimize incidents by proper design and siting, wind power can continue to grow as an environmentally sound and efficient source of energy.

Surveillance for Avian Influenza Viruses in Wild Birds in Denmark and Greenland, 2007–10

DEFF Research Database (Denmark)

Hjulsager, Charlotte Kristiane; Breum, Solvej Østergaard; Trebbien, Ramona

2012-01-01

healthy live birds in waterfowl reservoirs and along migratory flyways, birds living in proximity to domestic poultry, and hunted game birds. Dead birds were sampled by oropharyngeal swabbing. Healthy live wild birds were captured with nets, traps, or by hand and were sampled by swabbing...... America via Greenland and vice versa. In Denmark, the screenings for AI showed LPAI viruses to be naturally occurring in the wild bird population, particularly in waterfowl. The occurrence of AI viruses in the wild bird population may pose a risk for AI infections in Danish poultry....

Stamping through astronomy

CERN Document Server

Dicati, Renato

2013-01-01

Stamps and other postal documents are an attractive vehicle for presenting astronomy and its development. Written with expertise and great enthusiasm, this unique book offers a historical and philatelic survey of astronomy and some related topics on space exploration. It contains more than 1300 color reproductions of stamps relating to the history of astronomy, ranging from the earliest observations of the sky to modern research conducted with satellites and space probes. Featured are the astronomers and astrophysicists who contributed to this marvelous story – not only Ptolemy, Copernicus, Kepler, Newton, Herschel, and Einstein but also hundreds of other minor protagonists who played an important role in the development of this, the most ancient yet the most modern of all the sciences. The book also examines in depth the diverse areas which have contributed to the history of astronomy, including the instrumentation, the theories, and the observations. Many stamps illustrate the beauty and the mystery of ce...

Stamp in honour of CERN

CERN Multimedia

1966-01-01

21 February 1966. The Swiss post office issued a stamp in CERN's honour. This stamp showed the flags of the thirteen Member States at the time arranged in the geometrical outline of Switzerland against a background of a track photograph.

Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

International Nuclear Information System (INIS)

Li, Xiaodong; Chang, Ying; Wang, Cunyu; Hu, Ping; Dong, Han

2017-01-01

The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M s temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

Energy Technology Data Exchange (ETDEWEB)

Li, Xiaodong [School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 (China); Chang, Ying, E-mail: yingc@dlut.edu.cn [School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 (China); Wang, Cunyu [East China Branch of Central Iron & Steel Research Institute (CISRI), Beijing 100081 (China); Hu, Ping [School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 (China); Dong, Han [East China Branch of Central Iron & Steel Research Institute (CISRI), Beijing 100081 (China)

2017-01-02

The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M{sub s} temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

Birds from the Old East Slavic settlement Stadnyky 11th century

OpenAIRE

Gorobets, L. V.; Bondarchuk, O. A.; Zarutska, V. V.; Горобець, Л. В.; Бондарчук, О. А.; Заруцька, В. В.

2014-01-01

The work presents the results of the analysis of a species diversity of the Old East Slavic settlement Stadnyky. The majority of hunted birds belong to the group Anseriformes (at least 45 % of the minimum possible number of individuals). Among other groups, Black Grouse is the dominant (8,33 %). Among the remains found there one can name some rare types of the West Polessye: Gavia arctica, Aythya nyroca. We have drawn the conclusions about the significant role of autumn hunting of...

Sulforaphane inhibits osteoclast differentiation by suppressing the cell-cell fusion molecules DC-STAMP and OC-STAMP

International Nuclear Information System (INIS)

Takagi, Tomohiro; Inoue, Hirofumi; Takahashi, Nobuyuki; Katsumata-Tsuboi, Rie; Uehara, Mariko

2017-01-01

Sulforaphane (SFN), a kind of isothiocyanate, is derived from broccoli sprouts. It has anti-tumor, anti-inflammatory, and anti-oxidation activity. The molecular function of SFN in the inhibition of osteoclast differentiation is not well-documented. In this study, we assessed the effect of SFN on osteoclast differentiation in vitro. SFN inhibited osteoclast differentiation in both bone marrow cells and RAW264.7 cells. Key molecules involved in the inhibitory effects of SFN on osteoclast differentiation were determined using a microarray analysis, which showed that SFN inhibits osteoclast-associated genes, such as osteoclast-associated receptor (OSCAR), nuclear factor of activated T cells cytoplasmic-1, tartrate-resistant acid phosphatase, and cathepsin K. Moreover, the mRNA expression levels of the cell-cell fusion molecules dendritic cell specific transmembrane protein (DC-STAMP) and osteoclast stimulatory transmembrane protein (OC-STAMP) were strongly suppressed in cells treated with SFN. Furthermore, SFN increased the phosphorylation of signal transducer and activator of transcription 1 (STAT1), a regulator of macrophage and osteoclast cell fusion. Thus, our data suggested that SFN significantly inhibits the cell-cell fusion molecules DC-STAMP and OC-STAMP by inducing the phosphorylation of STAT1 (Tyr701), which might be regulated by interactions with OSCAR. - Highlights: • Sulforaphane inhibited osteoclast differentiation and osteoclast cell-fusion. • Sulforaphane suppressed not only NFATc1, but also cell-cell fusion molecules, DC-STAMP and OC-STAMP. • Sulforaphane decreased multinucleated osteoclasts, whereas increased mono-nucleated osteoclasts. • Sulforaphane inhibits the cell-cell fusion by inducing the phosphorylation of STAT1 (Tyr701).

STAMP alters the growth of transformed and ovarian cancer cells

International Nuclear Information System (INIS)

He, Yuanzheng; Blackford, John A Jr; Kohn, Elise C; Simons, S Stoney Jr

2010-01-01

Steroid receptors play major roles in the development, differentiation, and homeostasis of normal and malignant tissue. STAMP is a novel coregulator that not only enhances the ability of p160 coactivator family members TIF2 and SRC-1 to increase gene induction by many of the classical steroid receptors but also modulates the potency (or EC 50 ) of agonists and the partial agonist activity of antisteroids. These modulatory activities of STAMP are not limited to gene induction but are also observed for receptor-mediated gene repression. However, a physiological role for STAMP remains unclear. The growth rate of HEK293 cells stably transfected with STAMP plasmid and overexpressing STAMP protein is found to be decreased. We therefore asked whether different STAMP levels might also contribute to the abnormal growth rates of cancer cells. Panels of different stage human cancers were screened for altered levels of STAMP mRNA. Those cancers with the greatest apparent changes in STAMP mRNA were pursued in cultured cancer cell lines. Higher levels of STAMP are shown to have the physiologically relevant function of reducing the growth of HEK293 cells but, unexpectedly, in a steroid-independent manner. STAMP expression was examined in eight human cancer panels. More extensive studies of ovarian cancers suggested the presence of higher levels of STAMP mRNA. Lowering STAMP mRNA levels with siRNAs alters the proliferation of several ovarian cancer tissue culture lines in a cell line-specific manner. This cell line-specific effect of STAMP is not unique and is also seen for the conventional effects of STAMP on glucocorticoid receptor-regulated gene transactivation. This study indicates that a physiological function of STAMP in several settings is to modify cell growth rates in a manner that can be independent of steroid hormones. Studies with eleven tissue culture cell lines of ovarian cancer revealed a cell line-dependent effect of reduced STAMP mRNA on cell growth rates. This

Wildlife uses and hunting patterns in rural communities of the Yucatan Peninsula, Mexico.

Science.gov (United States)

Santos-Fita, Dídac; Naranjo, Eduardo J; Rangel-Salazar, José Luis

2012-10-02

Subsistence hunting is a traditional practice providing food and many other goods for households in the Yucatan Peninsula, southeast Mexico. Economic, demographic, and cultural change in this region drive wildlife habitat loss and local extinctions. Improving our understanding about current practices of wildlife use may support better management strategies for conserving game species and their habitat. We aimed to evaluate if wildlife use remained relevant for the subsistence of rural residents of the Yucatan Peninsula, as well as if local hunting practices were related to environmental, geographical, and cultural factors. Fieldwork was done between March 2010 and March 2011. Information was obtained through conversations, interviews, and participant observation. Record forms allowed recording animals hunted, biomass extracted, distance intervals to hunting sites, habitat types and seasonality of wildlife harvests. Data were analyzed using one-way Analysis of Variance, and Generalized Linear Models. Forty-six terrestrial vertebrate species were used for obtaining food, medicine, tools, adornments, pets, ritual objects, and for sale and mitigating damage. We recorded 968 animals taken in 664 successful hunting events. The Great Curassow, Ocellated Turkey, paca, white-tailed deer, and collared peccary were the top harvested species, providing 80.7% of biomass (10,190 kg). The numbers of animals hunted and biomass extracted declined as hunting distances increased from villages. Average per capita consumption was 4.65 ± 2.7 kg/person/year. Hunting frequencies were similar in forested and agricultural areas. Wildlife use, hunting patterns, and technologies observed in our study sites were similar to those recorded in previous studies for rural Mayan and mestizo communities in the Yucatan Peninsula and other Neotropical sites. The most heavily hunted species were those providing more products and by-products for residents. Large birds such as the Great Curassow and

Wildlife uses and hunting patterns in rural communities of the Yucatan Peninsula, Mexico

Directory of Open Access Journals (Sweden)

Santos-Fita Dídac

2012-10-01

-products for residents. Large birds such as the Great Curassow and the Ocellated Turkey were extremely important for local hunters, representing around 40% of total prey taken. Final considerations Our results suggest that hunting is frequent in our study areas. Low human densities allow low hunting pressure on most game species and favor conservation of the tropical forest. We suggest that co-management may help regulating hunting, prioritizing cultural practices of sustainable use and conservation for benefiting local users and animal populations.

Impact of estuarine pollution on birds

Science.gov (United States)

Blus, L.J.; Wiemeyer, Stanley N.; Kerwin, J.A.; Stendell, R.C.; Ohlendorf, H.M.; Stickel, L.F.

1977-01-01

Pollution of estuaries affects bird populations indirectly through changes in habitat and food supply. The multi-factor pollution of Chesapeake Bay has resulted in diminution of submerged aquatic plants and consequent change in food habits of the canvasback duck. Although dredge-spoil operations can improve wildlife habitat, they often result in its demise. Pollution of estuaries also affects birds directly, through chemical toxication, which may result in outright mortality or in reproductive impairment. Lead from industrial sources and roadways enters the estuaries and is accumulated in tissues of birds. Lead pellets deposited in estuaries as a result of hunting are consumed by ducks with sufficient frequency .to result m large annual die-offs from lead poisoning. Fish in certain areas, usually near industrial sources, may contain levels of mercury high enough to be hazardous to birds that consume them. Other heavy metals are present in estuarine birds, but their significance is poorly known. Oil exerts lethal or sublethal effects on birds by oiling their feathers, oiling eggs and young by contaminated parents, and by ingestion of oil-contaminated food. Organochlorine chemicals, of both agricultural and industrial origin, travel through the food chains and reach harmful levels in susceptible species of birds in certain estuarine ecosystems. Both outright mortality and reproductive impairment have occurred.

Hot stamping advanced manufacturing technology of lightweight car body

CERN Document Server

Hu, Ping; He, Bin

2017-01-01

This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers...

Influence of prepreg characteristics on stamp consolidation

Science.gov (United States)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2017-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and partial preconsolidation. This partial preconsolidation makes the influence of prepreg more critical compared to conventional preconsolidation methods which provide full preconsolidation. This paper aims to highlight consolidation challenges that can appear when stamp forming blanks manufactured by automated lay-up. Important prepreg characteristics were identified based on an experimental study where a comparison was made between various prepreg in their as-received, deconsolidated and stamp consolidated state. It was found that adding up small thickness variations across the width of a prepreg when stacking plies into a blank by automated lay-up can cause non-uniform consolidation. Additionally, deconsolidation of the prepreg does not seem to obstruct interlaminar bonding, while intralaminar voids initially present in a prepreg cannot be removed during stamp forming. An additional preconsolidation step after automated lay-up seems necessary to remove blank thickness variations and intralaminar voids for the current prepregs. Eliminating this process step and the successful combination of rapid automated lay-up and stamp forming requires prepregs which are void-free and have less thickness variation.

Ex-Post : The Investment Performance of Collectible Stamps

NARCIS (Netherlands)

Dimson, E.; Spaenjers, C.

2009-01-01

This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

High risk of lead contamination for scavengers in an area with high moose hunting success.

Science.gov (United States)

Legagneux, Pierre; Suffice, Pauline; Messier, Jean-Sébastien; Lelievre, Frédérick; Tremblay, Junior A; Maisonneuve, Charles; Saint-Louis, Richard; Bêty, Joël

2014-01-01

Top predators and scavengers are vulnerable to pollutants, particularly those accumulated along the food chain. Lead accumulation can induce severe disorders and alter survival both in mammals (including humans) and in birds. A potential source of lead poisoning in wild animals, and especially in scavengers, results from the consumption of ammunition residues in the tissues of big game killed by hunters. For two consecutive years we quantified the level lead exposure in individuals of a sentinel scavenger species, the common raven (Corvus corax), captured during the moose (Alces alces) hunting season in eastern Quebec, Canada. The source of the lead contamination was also determined using stable isotope analyses. Finally, we identified the different scavenger species that could potentially be exposed to lead by installing automatic cameras targeting moose gut piles. Blood lead concentration in ravens increased over time, indicating lead accumulation over the moose-hunting season. Using a contamination threshold of 100 µg x L(-1), more than 50% of individuals were lead-contaminated during the moose hunting period. Lead concentration was twice as high in one year compared to the other, matching the number of rifle-shot moose in the area. Non-contaminated birds exhibited no ammunition isotope signatures. The isotope signature of the lead detected in contaminated ravens tended towards the signature from lead ammunition. We also found that black bears (Ursus americanus), golden eagles and bald eagles (Aquila chrysaetos and Haliaeetus leucocephalus, two species of conservation concern) scavenged heavily on moose viscera left by hunters. Our unequivocal results agree with other studies and further motivate the use of non-toxic ammunition for big game hunting.

High risk of lead contamination for scavengers in an area with high moose hunting success.

Directory of Open Access Journals (Sweden)

Pierre Legagneux

Full Text Available Top predators and scavengers are vulnerable to pollutants, particularly those accumulated along the food chain. Lead accumulation can induce severe disorders and alter survival both in mammals (including humans and in birds. A potential source of lead poisoning in wild animals, and especially in scavengers, results from the consumption of ammunition residues in the tissues of big game killed by hunters. For two consecutive years we quantified the level lead exposure in individuals of a sentinel scavenger species, the common raven (Corvus corax, captured during the moose (Alces alces hunting season in eastern Quebec, Canada. The source of the lead contamination was also determined using stable isotope analyses. Finally, we identified the different scavenger species that could potentially be exposed to lead by installing automatic cameras targeting moose gut piles. Blood lead concentration in ravens increased over time, indicating lead accumulation over the moose-hunting season. Using a contamination threshold of 100 µg x L(-1, more than 50% of individuals were lead-contaminated during the moose hunting period. Lead concentration was twice as high in one year compared to the other, matching the number of rifle-shot moose in the area. Non-contaminated birds exhibited no ammunition isotope signatures. The isotope signature of the lead detected in contaminated ravens tended towards the signature from lead ammunition. We also found that black bears (Ursus americanus, golden eagles and bald eagles (Aquila chrysaetos and Haliaeetus leucocephalus, two species of conservation concern scavenged heavily on moose viscera left by hunters. Our unequivocal results agree with other studies and further motivate the use of non-toxic ammunition for big game hunting.

Tribological Behavior of Laser Textured Hot Stamping Dies

Directory of Open Access Journals (Sweden)

Andre Shihomatsu

2016-01-01

Full Text Available Hot stamping of high strength steels has been continuously developed in the automotive industry to improve mechanical properties and surface quality of stamped components. One of the main challenges faced by researchers and technicians is to improve stamping dies lifetime by reducing the wear caused by high pressures and temperatures present during the process. This paper analyzes the laser texturing of hot stamping dies and discusses how different surfaces textures influence the lubrication and wear mechanisms. To this purpose, experimental tests and numerical simulation were carried out to define the die region to be texturized and to characterize the textured surface topography before and after hot stamping tests with a 3D surface profilometer and scanning electron microscopy. Results showed that laser texturing influences the lubrication at the interface die-hot sheet and improves die lifetime. In this work, the best texture presented dimples with the highest diameter, depth, and spacing, with the surface topography and dimples morphology practically preserved after the hot stamping tests.

The effect of cushion-ram pulsation on hot stamping

Science.gov (United States)

Landgrebe, Dirk; Rautenstrauch, Anja; Kunke, Andreas; Polster, Stefan; Kriechenbauer, Sebastian; Mauermann, Reinhard

2016-10-01

Hot stamping is an important technology for manufacturing high-strength components. This technology offers the possibility to achieve significant weight reductions. In this study, cushion-ram pulsation (CRP), a new technology for hot stamping on servo-screw presses, was investigated and applied for hot stamping. Compared to a conventional process, the tests yielded a significantly higher drawing depth. In this paper, the CRP technology and the first test results with hot stamping were described in comparison to the conventional process.

Drivers of bushmeat hunting and perceptions of zoonoses in Nigerian hunting communities.

Directory of Open Access Journals (Sweden)

Sagan Friant

2015-05-01

Full Text Available Bushmeat hunting threatens biodiversity and increases the risk of zoonotic pathogen transmission. Nevertheless, limited information exists on patterns of contact with wildlife in communities that practice bushmeat hunting, especially with respect to social drivers of hunting behavior. We used interview responses from hunters and non-hunters in rural hunting communities in Nigeria to: 1 quantify contact rates with wildlife, 2 identify specific hunting behaviors that increase frequency of contact, 3 identify socioeconomic factors that predispose individuals to hunt, and 4 measure perceptions of risk. Participants engaged in a variety of behaviors that increased contact with wild animals, including: butchering to sell (37%, being injured (14%, using body parts for traditional medicine (19%, collecting carcasses found in forests and/or farms (18%, and keeping as pets (16%. Hunters came into contact with wildlife significantly more than non-hunters, even through non-hunting exposure pathways. Participants reported hunting rodents (95%, ungulates (93%, carnivores (93%, primates (87%, and bats (42%, among other prey. Reported hunting frequencies within taxonomic groups of prey were different for different hunting behaviors. Young age, lower education level, larger household size, having a father who hunts, and cultural group were all associated with becoming a hunter. Fifty-five percent of respondents were aware that they could contract diseases from wild animals, but only 26% of these individuals reported taking protective measures. Overall, hunters in this setting frequently contact a diversity of prey in risky ways, and the decision to become a hunter stems from family tradition, modified by economic necessity. Conservation and public health interventions in such settings may be most efficient when they capitalize on local knowledge and target root socio-economic and cultural drivers that lead to hunting behavior. Importantly, interventions that

Health care of hunting dogs

OpenAIRE

Spasojević-Kosić, Ljubica; Savić, Sara

2013-01-01

There are two basic aspects of hunting dog’s health care: infectious diseases of hunting dogs and dog’s hunting performance. Concerning infectious diseases of hunting dogs, special attention is paid to public health, preventing possible dangers that could possibly arise. On the other hand, hunting performance of dogs depends on their nutrition. A complete analysis of hunting dogs’ health care in our country requires an assessment of awareness level in hunte...

27 CFR 479.87 - Cancellation of stamp.

Science.gov (United States)

2010-04-01

... OTHER FIREARMS Transfer Tax Application and Order for Transfer of Firearm § 479.87 Cancellation of stamp. The method of cancellation of the stamp required by this subpart as prescribed in § 479.67 shall be used. Exemptions Relating to Transfers of Firearms ...

Influence of Prepreg Characteristics on Stamp Consolidation

NARCIS (Netherlands)

Slange, T.K.; Warnet, L.L.; Grouve, W.J.B.; Akkerman, R.

2017-01-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and

Analysis of alternative technologies stamping compressor blades of marine engines

Directory of Open Access Journals (Sweden)

Олександр Сергійович Аніщенко

2015-10-01

Full Text Available The author has made an analysis of several technologies stamping forgings compressor blades from titanium alloy ВT3-1. These technologies use different types of forming equipment: crank hot press, high-speed hammers, screw presses with hydraulic drive (SPHD, as well as isothermal forging hydraulic press. He pointed out the main advantages and disadvantages of the technology, noting that high-speed punching in the shipbuilding industry of Ukraine is not used for the manufacture of forgings blades. The article contains an economic analysis of the cost of forgings blades, which are made on four technologies: punching and calibration to crank hot press, stamping and calibration to press for isothermal forging, stamping and calibration on SPHD-press, stamping on SPHD-press and calibration to press for isothermal forging. The author has identified the effective use of these technologies. He showed that the use of SPHD-presses and hydraulic presses for isothermal forging reduces the cost of forging on the average 12% in comparison with the technology at the crank hot stamping press, increases the utilization of metal 1,3-1,5 times more, reduces power consumption 1,05-3,0 times less and complexity of manufacturing 1,8-4,2 times. However SPHD-press increases capital investment in the organization of stamping technology 2,6-5,3 times more and depreciation 2-4 times. Isothermal forging technology requires the cost of the stamps in 1,4-2,0 times higher than stamps for crank presses. The author argues that stamping forging blades technology improvement should be implemented saving basic materials first of all. Efficiency of isothermal stamping and calibration will be the higher, the more geometric dimensions of stamped forgings are

HUNT: Scavenger Hunt with Augmented Reality

Directory of Open Access Journals (Sweden)

Yan Lu

2015-04-01

Full Text Available This project shows a creative approach to the familiar scavenger hunt game. It involved the implementation of an iPhone application, HUNT, with Augmented Reality (AR capability for the users to play the game as well as an administrative website that game organizers can use to create and make available games for users to play. Using the HUNT mobile app, users will first make a selection from a list of games, and they will then be shown a list of objects that they must seek. Once the user finds a correct object and scans it with the built-in camera on the smartphone, the application will attempt to verify if it is the correct object and then display associated multi-media AR content that may include images and videos overlaid on top of real world views. HUNT not only provides entertaining activities within an environment that players can explore, but the AR contents can serve as an educational tool. The project is designed to increase user involvement by using a familiar and enjoyable game as a basis and adding an educational dimension by incorporating AR technology and engaging and interactive multimedia to provide users with facts about the objects that they have located

DC-STAMP Is an Osteoclast Fusogen Engaged in Periodontal Bone Resorption.

Science.gov (United States)

Wisitrasameewong, W; Kajiya, M; Movila, A; Rittling, S; Ishii, T; Suzuki, M; Matsuda, S; Mazda, Y; Torruella, M R; Azuma, M M; Egashira, K; Freire, M O; Sasaki, H; Wang, C Y; Han, X; Taubman, M A; Kawai, T

2017-06-01

Dendritic cell-specific transmembrane protein (DC-STAMP) plays a key role in the induction of osteoclast (OC) cell fusion, as well as DC-mediated immune regulation. While DC-STAMP gene expression is upregulated in the gingival tissue with periodontitis, its pathophysiological roles in periodontitis remain unclear. To evaluate the effects of DC-STAMP in periodontitis, anti-DC-STAMP-monoclonal antibody (mAb) was tested in a mouse model of ligature-induced periodontitis ( n = 6-7/group) where Pasteurella pneumotropica ( Pp)-reactive immune response activated T cells to produce receptor activator of nuclear factor kappa-B ligand (RANKL), which, in turn, promotes the periodontal bone loss via upregulation of osteoclastogenesis. DC-STAMP was expressed on the cell surface of mature multinuclear OCs, as well as immature mononuclear OCs, in primary cultures of RANKL-stimulated bone marrow cells. Anti-DC-STAMP-mAb suppressed the emergence of large, but not small, multinuclear OCs, suggesting that DC-STAMP is engaged in the late stage of cell fusion. Anti-DC-STAMP-mAb also inhibited pit formation caused by RANKL-stimulated bone marrow cells. Attachment of ligature to a second maxillary molar induced DC-STAMP messenger RNA and protein, along with elevated tartrate-resistant acid phosphatase-positive (TRAP+) OCs and alveolar bone loss. As we expected, systemic administration of anti-DC-STAMP-mAb downregulated the ligature-induced alveolar bone loss. Importantly, local injection of anti-DC-STAMP-mAb also suppressed alveolar bone loss and reduced the total number of multinucleated TRAP+ cells in mice that received ligature attachment. Attachment of ligature induced significantly elevated tumor necrosis factor-α, interleukin-1β, and RANKL in the gingival tissue compared with the control site without ligature ( P < 0.05), which was unaffected by local injection with either anti-DC-STAMP-mAb or control-mAb. Neither in vivo anti- Pp IgG antibody nor in vitro anti- Pp T

Development of Methods and Equipment for Sheet Stamping

Science.gov (United States)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

How Do Stamp Duties Affect the Housing Market?

OpenAIRE

Davidoff, Ian; Leigh, Andrew

2013-01-01

Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

Postage stamps: A convergence of metallurgy, art, and history

Science.gov (United States)

Habashi, Fathi

2002-04-01

Postage stamps have been used around the world to commemorate, in miniature, significant events and people, including those of importance in the history of metals and mineral production. From the presence of gold artifacts in an ancient Egyptian tomb to the role of uranium in nuclear power, stamps have captured the evolution of metallurgical processes. This article highlights some of those stamps.

Birdlime in Western Myanmar: Preparation, Use, and Conservation Implications for an Endemic Bird

Directory of Open Access Journals (Sweden)

Steven G. Platt

2012-12-01

Full Text Available Birdlimes are adhesive entangling compounds that passively capture birds by binding them to a substrate and rendering flight feathers useless. We investigated birdlime use among indigenous Chin hunters during a wildlife survey of Natma Taung National Park (NTNP in western Myanmar (May-June 2011. We found that birdlime is prepared from the sap of various banyan trees (Ficus spp. collected during the annual dry season (December-May. Birdlime is prepared by boiling sap to remove water, and the finished product is a readily malleable and extremely adhesive compound known locally as nghet phan te kaw (“bird glue”. Hunters employ four principal strategies when using birdlime: 1 limed sticks are placed at waterholes and springs; 2 limed sticks are placed in fruiting trees or nocturnal roost sites; 3 limed sticks are positioned at prominent vantage points and hunters mimic vocalizations to attract birds; 4 small insects (possibly termites are affixed to a limed pole and serve as bait to attract birds. Large numbers (>200 of birds can reportedly be captured during a single day by hunters using birdlime. At least 186 (63.9% of 291 species of birds occurring in Natma Taung National Park are thought to be vulnerable to this non-selective hunting strategy. The endangered white-browed nuthatch (Sitta victoriae Rippon Sittidae, a poorly-studied endemic species restricted to high elevation Oak-Rhododendron forest in NTNP, is vulnerable to birdliming, although the impact of hunting on populations remains unclear. We recommend that future investigations determine the sustainability of the Chin bird harvest by relating hunter off-take to recruitment and survivorship of nuthatches. If conservation action is deemed prudent, management plans should be developed in close collaboration with local Chin communities.

Fast thermal nanoimprint lithography by a stamp with integrated heater

DEFF Research Database (Denmark)

Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

2008-01-01

We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

Patterning of polymers: precise channel stamping by optimizing wetting properties

International Nuclear Information System (INIS)

Seemann, Ralf; Kramer, Edward J; Lange, Frederick F

2004-01-01

Channel stamping is a soft lithography technique that can be used to fabricate small structures of polymeric materials. This technique is cheap and easy but a considerable drawback is the fact that reproduction of the patterns of the stamp is often imprecise due to the wetting properties of liquid and stamp. In this paper, we report on experiments that reveal the parameters governing the behaviour of liquids in grooves and on edges. Optimizing these parameters leads to better-quality channel-stamped structures and enables the design of sophisticated structured polymeric materials, allowing channels as small as about 100 nm to be fabricated. Moreover, we show that it is even possible to build up a freestanding three-dimensional structure by stamping line patterns on top of each other

78 FR 10201 - Proposed Information Collection; Electronic Duck Stamp Program

Science.gov (United States)

2013-02-13

..., Interior. ACTION: Notice; request for comments. SUMMARY: We (U.S. Fish and Wildlife Service) will ask the... refuges where admission is charged. Duck Stamps and products that bear stamp images are also popular... fee the State will charge for issuance of an electronic stamp. Description of the process the State...

SPS commemorative stamp

CERN Multimedia

1977-01-01

The turn on of the SPS was commemorated in France by the issue of a CERN stamp. The date of issue, 22 Octber 1976, coincided with the first tests of the beam line taking particles to experiments in the West Hall. (CERN Courier 1976 p. 382)

Bird banding and climate change: can we make a difference?

Science.gov (United States)

C. John Ralph; Jared D. Wolfe

2014-01-01

So how does your banding effort fit into the new paradigm of climate science? A little background: many bird populations underwent mass declines during the 19th century from a variety of causes including hunting and habitat change. Current human-induced climate change represents a new and fast-acting pressure that is inherently more difficult to curtail and may drive...

Wildlife Hunting in Eastern Mongolia: Economic and Demographic Factors Influencing Hunting Behavior of Herding Households

Directory of Open Access Journals (Sweden)

Kirk A. Olson

2017-10-01

Full Text Available Much of Mongolia’s rangelands are under state control and managed via traditional land use practices and are habitat for numerous wildlife species harvested for their meat and fur. Political and economic transformations that have been occurring since the early 1990’s continues to affect all aspects of Mongolian society. To cope during periods of economic hardship, many turned to harvesting wildlife resources for income and subsistence and this resulted in precipitous declines of some populations, marmots for example. Interviews with herding households in Mongolia’s eastern steppe region were conducted to better determine how wildlife resources (Mongolian gazelle, Siberian marmot, red foxes, corsac foxes, and gray wolf are utilized and valued by herding families. Hunting, carried out by 65% of interviewees, returned an average of $103±172 dollars per household. The number of individuals hunted of any particular species during the previous year ranged widely - 46% of households hunted an average of 8±9 Mongolian gazelles (the equivalent of a small cow, 31% hunted 5±5 corsac foxes, 29% hunted 42±47 marmots, 22% hunted 3±3 red foxes, and 17% hunted 3±2 gray wolves. Differences in mean annual income between hunting and non-hunting households were similar ($1,292±1,132 vs. $1,080±1,196 however the median difference was greater ($1,009 vs $749. However, non-hunting households owned significantly more livestock than hunting households (168±183 vs. 93±92 Livestock Units, and the proportion of hunting households living below the poverty line was higher. Households that were larger or had few numbers of livestock were more likely to engage in hunting than smaller households with more livestock. Household and livestock variables were also significant predictors of a households likelihood of hunting Mongolian gazelle, Siberian marmot, and corsac fox, but not for red fox or gray wolf. Wildlife management policies will likely receive greater

High human exposure to lead through consumption of birds hunted with lead shot

International Nuclear Information System (INIS)

Johansen, P.; Asmund, G.; Riget, F.

2004-01-01

Lead shot contaminates the edible parts of birds so that tolerable human lead intake is exceeded. - We assess lead contamination of Greenland seabirds killed with lead shot having studied thick-billed murre and common eider, the two most important species in the diet. The lead concentration is very high in meat of eiders killed with lead shot (mean 6.1 μg/g-wet wt, 95% CL 2.1-12). This level is about 44 times higher than in drowned eiders and eight times higher than in shot murres. Analyzing whole breasts instead of sub-samples reveals about seven times higher lead levels in birds' meat. We conclude that in some cases the lead intake by Greenland bird eaters will largely exceed the FAO/WHO tolerable lead intake guideline and that lead shot is a more important source of lead in the diet than previously estimated

Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

OpenAIRE

Wood, Gavin A.

1994-01-01

The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

Ramsay Hunt syndrome

Science.gov (United States)

Hunt syndrome; Herpes zoster oticus; Geniculate ganglion zoster; Geniculate herpes; Herpetic geniculate ganglionitis ... The varicella-zoster virus that causes Ramsay Hunt syndrome is the same virus that causes chickenpox and ...

Digital time stamping system based on open source technologies.

Science.gov (United States)

Miskinis, Rimantas; Smirnov, Dmitrij; Urba, Emilis; Burokas, Andrius; Malysko, Bogdan; Laud, Peeter; Zuliani, Francesco

2010-03-01

A digital time stamping system based on open source technologies (LINUX-UBUNTU, OpenTSA, OpenSSL, MySQL) is described in detail, including all important testing results. The system, called BALTICTIME, was developed under a project sponsored by the European Commission under the Program FP 6. It was designed to meet the requirements posed to the systems of legal and accountable time stamping and to be applicable to the hardware commonly used by the national time metrology laboratories. The BALTICTIME system is intended for the use of governmental and other institutions as well as personal bodies. Testing results demonstrate that the time stamps issued to the user by BALTICTIME and saved in BALTICTIME's archives (which implies that the time stamps are accountable) meet all the regulatory requirements. Moreover, the BALTICTIME in its present implementation is able to issue more than 10 digital time stamps per second. The system can be enhanced if needed. The test version of the BALTICTIME service is free and available at http://baltictime. pfi.lt:8080/btws/ and http://baltictime.lnmc.lv:8080/btws/.

"Freshwater killer whales": beaching behavior of an alien fish to hunt land birds.

Directory of Open Access Journals (Sweden)

Julien Cucherousset

Full Text Available The behavioral strategies developed by predators to capture and kill their prey are fascinating, notably for predators that forage for prey at, or beyond, the boundaries of their ecosystem. We report here the occurrence of a beaching behavior used by an alien and large-bodied freshwater predatory fish (Silurus glanis to capture birds on land (i.e. pigeons, Columbia livia. Among a total of 45 beaching behaviors observed and filmed, 28% were successful in bird capture. Stable isotope analyses (δ(13C and δ(15N of predators and their putative prey revealed a highly variable dietary contribution of land birds among individuals. Since this extreme behavior has not been reported in the native range of the species, our results suggest that some individuals in introduced predator populations may adapt their behavior to forage on novel prey in new environments, leading to behavioral and trophic specialization to actively cross the water-land interface.

A compact system for large-area thermal nanoimprint lithography using smart stamps

DEFF Research Database (Denmark)

Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

2008-01-01

We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure...... for successful imprint is reduced. Additionally, the stamp is capable of performing controlled demolding after imprint. Due to the complexity of the stamp, a compact and cost-effective imprint apparatus can be constructed. The design and fabrication of the advanced stamp as well as the simple imprint equipment...

Campylobacter jejuni and Campylobacter coli in wild birds on Danish livestock farms

DEFF Research Database (Denmark)

Hald, Birthe; Skov, Marianne Nielsine; Nielsen, Eva Møller

2016-01-01

. The farm environment provides attractive foraging and breeding habitats for some bird species reported to carry thermophilic Campylobacter spp. We investigated the Campylobacter spp. carriage rates in 52 wild bird species present on 12 Danish farms, sampled during a winter and a summer season, in order...... feeding on a diet of animal or mixed animal and vegetable origin, foraging on the ground and vegetation in close proximity to livestock stables were more likely to carry Campylobacter spp. in both summer (P birds foraging further away from the farm or in the air. Age...... food of animal or mixed animal and vegetable origin and foraging on the ground close to livestock were more likely to carry Campylobacter spp. than those foraging further away or hunting in the air. These findings suggest that wild birds may play a role in sustaining the epidemiology of Campylobacter...

Dodo-Bird or Dressing Up the Pig and the Politics of Psychotherapy: A Reply to Vandenberghe and de Sousa (2005)

Science.gov (United States)

Cautilli, Joseph

2006-01-01

It is fitting that the concept of all having one and having prizes is attributed to the Dodo-Bird. The dodo was a flightless bird. In shape and form it was similar to the modern turkey. The dodo was native to Mauritius, where it lived for thousands of years before domestic animals brought to Mauritius hunted it to extinction. The last live…

Programming the BasicStamp : using MacBS2

NARCIS (Netherlands)

Djajadiningrat, J.P.; Stienstra, M.

2004-01-01

This article explains how to program a BasicStamp microcontroller using a Macintosh. It takes an absolute beginner's perspective and talks you through the whole process including how to hook up a programmer board, how to write some programs in the BasisStamp language PBASIC, and how to do some

Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

Energy Technology Data Exchange (ETDEWEB)

Meng Fantao; Chu Jinkui [Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, 116024 Dalian (China); Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak [Obducat AB, SE-20125 Malmoe (Sweden); Maximov, Ivan; Montelius, Lars; Xu, H Q [Division of Solid State Physics, Lund University, Box 118, S-22100 Lund (Sweden); Nilsson, Lars, E-mail: ivan.maximov@ftf.lth.se [Department of Food Technology, Engineering and Nutrition, Lund University, Box 117, S-22100 Lund (Sweden)

2011-05-06

Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

Energy Technology Data Exchange (ETDEWEB)

Choi, So Young; Kim, Jong Do [Korea Maritime and Ocean University, Busan (Korea, Republic of); Kim, Jong Su [Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

2015-01-15

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

International Nuclear Information System (INIS)

Choi, So Young; Kim, Jong Do; Kim, Jong Su

2015-01-01

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained

Stamp Detection in Color Document Images

DEFF Research Database (Denmark)

Micenkova, Barbora; van Beusekom, Joost

2011-01-01

, moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

Hunting, Exotic Carnivores, and Habitat Loss: Anthropogenic Effects on a Native Carnivore Community, Madagascar.

Science.gov (United States)

Farris, Zach J; Golden, Christopher D; Karpanty, Sarah; Murphy, Asia; Stauffer, Dean; Ratelolahy, Felix; Andrianjakarivelo, Vonjy; Holmes, Christopher M; Kelly, Marcella J

2015-01-01

The wide-ranging, cumulative, negative effects of anthropogenic disturbance, including habitat degradation, exotic species, and hunting, on native wildlife has been well documented across a range of habitats worldwide with carnivores potentially being the most vulnerable due to their more extinction prone characteristics. Investigating the effects of anthropogenic pressures on sympatric carnivores is needed to improve our ability to develop targeted, effective management plans for carnivore conservation worldwide. Utilizing photographic, line-transect, and habitat sampling, as well as landscape analyses and village-based bushmeat hunting surveys, we provide the first investigation of how multiple forms of habitat degradation (fragmentation, exotic carnivores, human encroachment, and hunting) affect carnivore occupancy across Madagascar's largest protected area: the Masoala-Makira landscape. We found that as degradation increased, native carnivore occupancy and encounter rates decreased while exotic carnivore occupancy and encounter rates increased. Feral cats (Felis species) and domestic dogs (Canis familiaris) had higher occupancy than half of the native carnivore species across Madagascar's largest protected landscape. Bird and small mammal encounter rates were negatively associated with exotic carnivore occupancy, but positively associated with the occupancy of four native carnivore species. Spotted fanaloka (Fossa fossana) occupancy was constrained by the presence of exotic feral cats and exotic small Indian civet (Viverricula indica). Hunting was intense across the four study sites where hunting was studied, with the highest rates for the small Indian civet (mean=90 individuals consumed/year), the ring-tailed vontsira (Galidia elegans) (mean=58 consumed/year), and the fosa (Cryptoprocta ferox) (mean=31 consumed/year). Our modeling results suggest hunters target intact forest where carnivore occupancy, abundance, and species richness, are highest. These various

Hunting, Exotic Carnivores, and Habitat Loss: Anthropogenic Effects on a Native Carnivore Community, Madagascar.

Directory of Open Access Journals (Sweden)

Zach J Farris

Full Text Available The wide-ranging, cumulative, negative effects of anthropogenic disturbance, including habitat degradation, exotic species, and hunting, on native wildlife has been well documented across a range of habitats worldwide with carnivores potentially being the most vulnerable due to their more extinction prone characteristics. Investigating the effects of anthropogenic pressures on sympatric carnivores is needed to improve our ability to develop targeted, effective management plans for carnivore conservation worldwide. Utilizing photographic, line-transect, and habitat sampling, as well as landscape analyses and village-based bushmeat hunting surveys, we provide the first investigation of how multiple forms of habitat degradation (fragmentation, exotic carnivores, human encroachment, and hunting affect carnivore occupancy across Madagascar's largest protected area: the Masoala-Makira landscape. We found that as degradation increased, native carnivore occupancy and encounter rates decreased while exotic carnivore occupancy and encounter rates increased. Feral cats (Felis species and domestic dogs (Canis familiaris had higher occupancy than half of the native carnivore species across Madagascar's largest protected landscape. Bird and small mammal encounter rates were negatively associated with exotic carnivore occupancy, but positively associated with the occupancy of four native carnivore species. Spotted fanaloka (Fossa fossana occupancy was constrained by the presence of exotic feral cats and exotic small Indian civet (Viverricula indica. Hunting was intense across the four study sites where hunting was studied, with the highest rates for the small Indian civet (mean=90 individuals consumed/year, the ring-tailed vontsira (Galidia elegans (mean=58 consumed/year, and the fosa (Cryptoprocta ferox (mean=31 consumed/year. Our modeling results suggest hunters target intact forest where carnivore occupancy, abundance, and species richness, are highest

Hunting, Exotic Carnivores, and Habitat Loss: Anthropogenic Effects on a Native Carnivore Community, Madagascar

Science.gov (United States)

Farris, Zach J.; Golden, Christopher D.; Karpanty, Sarah; Murphy, Asia; Stauffer, Dean; Ratelolahy, Felix; Andrianjakarivelo, Vonjy; Holmes, Christopher M.; Kelly, Marcella J.

2015-01-01

The wide-ranging, cumulative, negative effects of anthropogenic disturbance, including habitat degradation, exotic species, and hunting, on native wildlife has been well documented across a range of habitats worldwide with carnivores potentially being the most vulnerable due to their more extinction prone characteristics. Investigating the effects of anthropogenic pressures on sympatric carnivores is needed to improve our ability to develop targeted, effective management plans for carnivore conservation worldwide. Utilizing photographic, line-transect, and habitat sampling, as well as landscape analyses and village-based bushmeat hunting surveys, we provide the first investigation of how multiple forms of habitat degradation (fragmentation, exotic carnivores, human encroachment, and hunting) affect carnivore occupancy across Madagascar’s largest protected area: the Masoala-Makira landscape. We found that as degradation increased, native carnivore occupancy and encounter rates decreased while exotic carnivore occupancy and encounter rates increased. Feral cats (Felis species) and domestic dogs (Canis familiaris) had higher occupancy than half of the native carnivore species across Madagascar’s largest protected landscape. Bird and small mammal encounter rates were negatively associated with exotic carnivore occupancy, but positively associated with the occupancy of four native carnivore species. Spotted fanaloka (Fossa fossana) occupancy was constrained by the presence of exotic feral cats and exotic small Indian civet (Viverricula indica). Hunting was intense across the four study sites where hunting was studied, with the highest rates for the small Indian civet (x¯ = 90 individuals consumed/year), the ring-tailed vontsira (Galidia elegans) (x¯ = 58 consumed/year), and the fosa (Cryptoprocta ferox) (x¯ = 31 consumed/year). Our modeling results suggest hunters target intact forest where carnivore occupancy, abundance, and species richness, are

Wolves on the hunt: The behavior of wolves hunting wild prey

Science.gov (United States)

Mech, L. David; Smith, Douglas W.; MacNulty, Daniel R.

2015-01-01

The interactions between apex predators and their prey are some of the most awesome and meaningful in nature—displays of strength, endurance, and a deep coevolutionary history. And there is perhaps no apex predator more impressive and important in its hunting—or more infamous, more misjudged—than the wolf. Because of wolves’ habitat, speed, and general success at evading humans, researchers have faced great obstacles in studying their natural hunting behaviors. The first book to focus explicitly on wolf hunting of wild prey, Wolves on the Hunt seeks to fill these gaps in our knowledge and understanding. Combining behavioral data, thousands of hours of original field observations, research in the literature, a wealth of illustrations, and—in the e-book edition and online—video segments from cinematographer Robert K. Landis, the authors create a compelling and complex picture of these hunters. The wolf is indeed an adept killer, able to take down prey much larger than itself. While adapted to hunt primarily hoofed animals, a wolf—or especially a pack of wolves—can kill individuals of just about any species. But even as wolves help drive the underlying rhythms of the ecosystems they inhabit, their evolutionary prowess comes at a cost: wolves spend one-third of their time hunting—the most time consuming of all wolf activities—and success at the hunt only comes through traveling long distances, persisting in the face of regular failure, detecting and taking advantage of deficiencies in the physical condition of individual prey, and through ceaseless trial and error, all while risking injury or death. By describing and analyzing the behaviors wolves use to hunt and kill various wild prey—including deer, moose, caribou, elk, Dall sheep, mountain goats, bison, musk oxen, arctic hares, beavers, and others—Wolves on the Hunt provides a revelatory portrait of one of nature’s greatest hunters.

Bird on the wire: Landscape planning considering costs and benefits for bird populations coexisting with power lines.

Science.gov (United States)

D'Amico, Marcello; Catry, Inês; Martins, Ricardo C; Ascensão, Fernando; Barrientos, Rafael; Moreira, Francisco

2018-02-24

Power-line grids are increasingly expanding worldwide, as well as their negative impacts on avifauna, namely the direct mortality through collision and electrocution, the reduction of breeding performance, and the barrier effect. On the other hand, some bird species can apparently benefit from the presence of power lines, for example perching for hunting purposes or nesting on electricity towers. In this perspective essay, we reviewed the scientific literature on both costs and benefits for avifauna coexisting with power lines. Overall, we detected a generalized lack of studies focusing on these costs or benefits at a population level. We suggest that a switch in research approach to a larger spatio-temporal scale would greatly improve our knowledge about the actual effects of power lines on bird populations. This research approach would facilitate suitable landscape planning encompassing both mitigation of costs and promotion of benefits for bird populations coexisting with power lines. For example, the strategic route planning of electricity infrastructures would limit collision risk or barrier effects for threatened bird populations. Concurrently, this strategic route planning would promote the range expansion of threatened populations of other bird species, by providing nesting structures in treeless but potentially suitable landscapes. We suggest establishing a collaborative dialogue among the scientific community, governments, and electricity companies, with the aim to produce a win-win scenario in which both biodiversity conservation and infrastructure development are integrated in a common strategy.

Mourning dove hunting regulation strategy based on annual harvest statistics and banding data

Science.gov (United States)

Otis, D.L.

2006-01-01

Although managers should strive to base game bird harvest management strategies on mechanistic population models, monitoring programs required to build and continuously update these models may not be in place. Alternatively, If estimates of total harvest and harvest rates are available, then population estimates derived from these harvest data can serve as the basis for making hunting regulation decisions based on population growth rates derived from these estimates. I present a statistically rigorous approach for regulation decision-making using a hypothesis-testing framework and an assumed framework of 3 hunting regulation alternatives. I illustrate and evaluate the technique with historical data on the mid-continent mallard (Anas platyrhynchos) population. I evaluate the statistical properties of the hypothesis-testing framework using the best available data on mourning doves (Zenaida macroura). I use these results to discuss practical implementation of the technique as an interim harvest strategy for mourning doves until reliable mechanistic population models and associated monitoring programs are developed.

76 FR 54657 - Migratory Bird Hunting; Early Seasons and Bag and Possession Limits for Certain Migratory Game...

Science.gov (United States)

2011-09-01

... Migratory Game Birds in the Contiguous United States, Alaska, Hawaii, Puerto Rico, and the Virgin Islands... Bag and Possession Limits for Certain Migratory Game Birds in the Contiguous United States, Alaska...; migratory game birds in Alaska, Hawaii, Puerto Rico, and the Virgin Islands; and some extended falconry...

Time Stamp Synchronization of PEFP Distributed Control Systems

International Nuclear Information System (INIS)

Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

2010-01-01

Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

78 FR 53199 - Migratory Bird Hunting; Early Seasons and Bag and Possession Limits for Certain Migratory Game...

Science.gov (United States)

2013-08-28

... Migratory Game Birds in the Contiguous United States, Alaska, Hawaii, Puerto Rico, and the Virgin Islands... Seasons and Bag and Possession Limits for Certain Migratory Game Birds in the Contiguous United States... seasons; migratory game birds in Alaska, Hawaii, Puerto Rico, and the Virgin Islands; youth waterfowl day...

77 FR 53751 - Migratory Bird Hunting; Early Seasons and Bag and Possession Limits for Certain Migratory Game...

Science.gov (United States)

2012-08-31

... Migratory Game Birds in the Contiguous United States, Alaska, Hawaii, Puerto Rico, and the Virgin Islands... Seasons and Bag and Possession Limits for Certain Migratory Game Birds in the Contiguous United States... seasons; migratory game birds in Alaska, Hawaii, Puerto Rico, and the Virgin Islands; youth waterfowl day...

Direct stamping of silver nanoparticles toward residue-free thick electrode

Directory of Open Access Journals (Sweden)

Jiseok Kim, Kevin Wubs, Byeong-Soo Bae and Woo Soo Kim

2012-01-01

Full Text Available Direct stamping of functional materials has been developed for cost-effective and process-effective manufacturing of nano/micro patterns. However, there remain several challenging issues like the perfect removal of the residual layer and realization of high aspect ratio. We have demonstrated facile fabrication of flexible strain sensors that have microscale thick interdigitated capacitors with no residual layer by a simple direct stamping with silver nanoparticles (AgNPs. Polyurethane (PU prepolymer was utilized as an adhesive layer to transfer AgNPs more efficiently during the separation step of the flexible stamp from directly stamped AgNPs. Scanning electron microscopy images and energy dispersive x-ray spectroscopy analysis revealed residue-free transfer of microscale thick interdigitated electrodes onto two different flexible substrates (elastomeric and brittle for the application to highly sensitive strain sensors.

Consumer Profile Of Hunting Tourism

Directory of Open Access Journals (Sweden)

Diana Marin

2015-05-01

Full Text Available Knowing the profileof hunting tourism consumers is particularly useful to the administrators ofhunting funds or natural parks, and of travel agencies that develop huntingtourism products for the hunting of large game for trophy, of small game asrecreational activity and also for the experienced hunting tourists who loveadventure and hunting with traditional weapons. The motivation for huntingconsists in the existing fauna in a certain area, but there are also cultural,historical reasons or spending time in the middle of nature. Consumers ofhunting tourism have a wide range of ages: hunting tourists prefer watching theanimals in their natural habitat and are less adventure-oriented, unlike trophyhunting tourists who are self-contended, travel much and wish to know thehistory, the culture and the behaviour of animals in protected areas. Theyprefer special accommodation and transport conditions and rely on largeincomes: they wish to get the rarest trophies to display back home as a symbolof their hunting skills and courage

A compact system for large-area thermal nanoimprint lithography using smart stamps

International Nuclear Information System (INIS)

Pedersen, R H; Hansen, O; Kristensen, A

2008-01-01

We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure for successful imprint is reduced. Additionally, the stamp is capable of performing controlled demolding after imprint. Due to the complexity of the stamp, a compact and cost-effective imprint apparatus can be constructed. The design and fabrication of the advanced stamp as well as the simple imprint equipment is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for µm-scale features is demonstrated

Functions and values of hunting and its management in Spain: scientific studies on the hunting community

Directory of Open Access Journals (Sweden)

Miguel Delibes-Mateos

2018-01-01

Full Text Available We summarize information provided by some recent scientific studies in relation to the opinions, views and attitudes of Spanish hunters regarding hunting and its management. In particular, we discuss the different functions (economic, ecological and social that hunters attribute to hunting, as well as their moral judgements associated with the different motives for hunting. In addition, we explore how hunters value different game management tools (including predator control, releases of farm-reared animals and the regulation of hunting pressure, and we discuss how such valuations affect their decision-making. Finally, we assess potential future trends of hunting, as expressed by the hunters themselves.

X-ray investigations of lead shot pellets in the tissues of various species of birds found dead in Northern Germany

International Nuclear Information System (INIS)

Averbeck, C.; Kempen, E.; Petermann, S.; Prueter, J.; Vaur, G.; Visse, C.

1990-01-01

Within the period 1985-1988 467 specimens of dead or moribund birds including 51 species were collected in northern Germany, and x-rayed to ascertain lead pellet damage. In 15.8% of the cases evidence of lead bullets was found in the tissues. In over 80% of the cases lead pellets were found, and in 11 (14.9%) of the animals air rifle ammunition was discovered. Along with wood cock, greylag geese, and eider ducks several species of sea gulls were especially affected. The exact causes of death of the lead damaged birds could usually not be determined. The problems with lead pellet ammunition are presented and a legally designated maximum shooting distance is recommended. The replacement of lead pellets with small caliber ammunition for hunting from blinds is also discussed. Bullets are considered more effective for the hunting of knob-billed swans

Hunting for Conservation? The Re-introduction of Sport Hunting in Uganda Examined

NARCIS (Netherlands)

Ochieng, A.; Ahebwa, W.M.; Visseren-Hamakers, I.J.

2015-01-01

Uganda reintroduced sport hunting in 2001. The policy was piloted around Lake Mburo National Park and later replicated around other protected areas. This chapter analyses the development, implementation and impact of sport hunting policy in Uganda. We do so through literature review, document

Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

Science.gov (United States)

Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

2015-05-29

Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

Botanical Scavenger Hunt

Science.gov (United States)

Walker-Livingston, Wendy

2009-01-01

Why not combine the use of technology with the excitement of a scavenger hunt that moves middle-level students out into the "wilds" of their school campus to classify plants? In the lesson plan described here, students embark on a botanical scavenger hunt and then document their findings using a digital camera. This project was designed to allow…

Stamp duties in Indian states - a case for reform

OpenAIRE

Alm, James; Annez, Patricia; Modi, Arbind

2004-01-01

The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

Directory of Open Access Journals (Sweden)

CARAUS MADALINA

2015-12-01

Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

Application of Modified Digital Halftoning Techniques to Data Hiding in Personalized Stamps

Institute of Scientific and Technical Information of China (English)

Hsi-Chun Wang; Chi-Ming Lian; Pei-Chi Hsiao

2004-01-01

The objective of this research is to embed information in personalized stamps by modified digital halftoning techniques. The displaced and deformed halftone dots are used to encode data in the personalized stamps. Hidden information can be retrieved by either an optical decoder or digital image processing techniques.The results show that personalized stamps with value-added features like data hiding or digital watermarking can be successfully implemented.

Biological and societal dimensions of lead poisoning in birds in the USA

Science.gov (United States)

Friend, Milton; Franson, J. Christian; Anderson, William L.

2008-01-01

The ingestion of spent lead shot was known to cause mortality in wild waterfowl in the US a century before the implementation of nontoxic shot regulations began in 1972. The biological foundation for this transition was strongly supported by both field observations and structured scientific investigations. Despite the overwhelming evidence, various societal factors forestalled the full transition to nontoxic shot for waterfowl hunting until 1991. Now, nearly 20 years later, these same factors weigh heavily in current debates about nontoxic shot requirements for hunting other game birds, requiring nontoxic bullets for big game hunting in California Condor range and for restricting the use of small lead sinkers and jig heads for sport-fishing. As with waterfowl, a strong science-based foundation is requisite for further transitions to nontoxic ammunition and fishing weights. Our experiences have taught us that the societal aspects of this transition are as important as the biological components and must be adequately addressed before alternatives to toxic lead ammunition, fishing weights, and other materials will be accepted as an investment in wildlife conservation.

Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

Science.gov (United States)

Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

2017-12-01

LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

Hunting, law enforcement, and African primate conservation.

Science.gov (United States)

N'Goran, Paul K; Boesch, Christophe; Mundry, Roger; N'Goran, Eliezer K; Herbinger, Ilka; Yapi, Fabrice A; Kühl, Hjalmar S

2012-06-01

Primates are regularly hunted for bushmeat in tropical forests, and systematic ecological monitoring can help determine the effect hunting has on these and other hunted species. Monitoring can also be used to inform law enforcement and managers of where hunting is concentrated. We evaluated the effects of law enforcement informed by monitoring data on density and spatial distribution of 8 monkey species in Taï National Park, Côte d'Ivoire. We conducted intensive surveys of monkeys and looked for signs of human activity throughout the park. We also gathered information on the activities of law-enforcement personnel related to hunting and evaluated the relative effects of hunting, forest cover and proximity to rivers, and conservation effort on primate distribution and density. The effects of hunting on monkeys varied among species. Red colobus monkeys (Procolobus badius) were most affected and Campbell's monkeys (Cercopithecus campbelli) were least affected by hunting. Density of monkeys irrespective of species was up to 100 times higher near a research station and tourism site in the southwestern section of the park, where there is little hunting, than in the southeastern part of the park. The results of our monitoring guided law-enforcement patrols toward zones with the most hunting activity. Such systematic coordination of ecological monitoring and law enforcement may be applicable at other sites. ©2012 Society for Conservation Biology.

27 CFR 70.332 - Unauthorized use or sale of stamps.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

Science.gov (United States)

Wang, Yuhuang [Evanston, IL; Hauge, Robert H [Houston, TX; Schmidt, Howard K [Houston, TX; Kim, Myung Jong [Houston, TX; Kittrell, W Carter [Houston, TX

2009-09-08

The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

Directory of Open Access Journals (Sweden)

Juergen Brugger

2013-10-01

Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

A hedonic analysis of the complex hunting experience

DEFF Research Database (Denmark)

Lundhede, Thomas; Jacobsen, Jette Bredahl; Thorsen, Bo Jellesmark

2015-01-01

In Denmark, the right to hunt is vested with the land owner but can be transferred to others and is traded on a well-established market. The dominant form of hunting leases is time limited contract transferring the hunting rights on a piece of land to one or more persons. We analyze this market...... for hunting leases using the hedonic method on a rich set of data obtained from Danish hunters. We hypothesize and show that the price of a hunting lease reflects that hunting is a composite experience; and also reflects aspects relating to the landowners cost of leasing out hunting. Thus, the value...

Is recreational hunting important for landscape multi-functionality?

DEFF Research Database (Denmark)

Lund, Jens Friis; Jensen, Frank Søndergaard

2017-01-01

Recreational hunting may be important to the shaping of the agricultural landscape. Land owners who hunt or lease out hunting rights have an incentive to promote landscapes that contain wildlife biotopes, which may serve wider societal values, such as landscape aesthetics, biodiversity, and prese......Recreational hunting may be important to the shaping of the agricultural landscape. Land owners who hunt or lease out hunting rights have an incentive to promote landscapes that contain wildlife biotopes, which may serve wider societal values, such as landscape aesthetics, biodiversity......, and preservation of valued and/or threatened animal and plant species. Recreational hunting may thus contribute to preserve and enhance landscape multifunctionality. Yet, little is known about the importance of hunting interests in motivating such landscape management. In this article, we seek to shed light...

Stamping the Earth from space

CERN Document Server

Dicati, Renato

2017-01-01

This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

POLYELECTROLYTE MULTILAYER STAMPING IN AQUEOUS PHASE AND NON-CONTACT MODE

Science.gov (United States)

Mehrotra, Sumit; Lee, Ilsoon; Liu, Chun; Chan, Christina

2011-01-01

Polyelectrolyte multilayer (PEM) transfer printing has been previously achieved by stamping under dry conditions. Here, we show for the first time, that PEM can be transferred from a stamp to the base substrate under aqueous conditions whereby the two surfaces are in a non-contact mode. Degradable multilayers of (PAA/PEG)10.5 followed by non-degradable multilayers of (PDAC/SPS)80.5 were fabricated under acidic pH conditions on either PDMS or glass (stamp), and subsequently transferred over top of another multilayer prepared on a different substrate (base substrate), with a spacing of ~ 200 μm between the stamping surface and the base substrate. This multilayer transfer was performed under physiological pH conditions. This process is referred to herein as non-contact, aqueous-phase multilayer (NAM) transfer. NAM transfer can be useful for applications such as fabricating three-dimensional (3-D) cellular scaffolds. We attempted to create a 3-D cellular scaffold using NAM transfer, and characterized the scaffolds with conventional and fluorescence microscopy. PMID:21860540

Hunting for the optimal hunt

DEFF Research Database (Denmark)

Jensen, Gitte Høj; Madsen, Jesper; Wisz, Mary

the hunting season. To test that the geese did not leave because of a lack of food the field status in both areas was classified and density of waste grain was counted on stubble fields before, during and after the geese had left the area. The experiment is carried out in close collaboration with researchers...

Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

Science.gov (United States)

Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

2018-01-01

The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

Cheetah do not abandon hunts because they overheat

Science.gov (United States)

Hetem, Robyn S.; Mitchell, Duncan; de Witt, Brenda A.; Fick, Linda G.; Meyer, Leith C. R.; Maloney, Shane K.; Fuller, Andrea

2013-01-01

Hunting cheetah reportedly store metabolic heat during the chase and abandon chases because they overheat. Using biologging to remotely measure the body temperature (every minute) and locomotor activity (every 5 min) of four free-living cheetah, hunting spontaneously, we found that cheetah abandoned hunts, but not because they overheated. Body temperature averaged 38.4°C when the chase was terminated. Storage of metabolic heat did not compromise hunts. The increase in body temperature following a successful hunt was double that of an unsuccessful hunt (1.3°C ± 0.2°C versus 0.5°C ± 0.1°C), even though the level of activity during the hunts was similar. We propose that the increase in body temperature following a successful hunt is a stress hyperthermia, rather than an exercise-induced hyperthermia. PMID:23883578

Cheetah do not abandon hunts because they overheat.

Science.gov (United States)

Hetem, Robyn S; Mitchell, Duncan; de Witt, Brenda A; Fick, Linda G; Meyer, Leith C R; Maloney, Shane K; Fuller, Andrea

2013-10-23

Hunting cheetah reportedly store metabolic heat during the chase and abandon chases because they overheat. Using biologging to remotely measure the body temperature (every minute) and locomotor activity (every 5 min) of four free-living cheetah, hunting spontaneously, we found that cheetah abandoned hunts, but not because they overheated. Body temperature averaged 38.4°C when the chase was terminated. Storage of metabolic heat did not compromise hunts. The increase in body temperature following a successful hunt was double that of an unsuccessful hunt (1.3°C ± 0.2°C versus 0.5°C ± 0.1°C), even though the level of activity during the hunts was similar. We propose that the increase in body temperature following a successful hunt is a stress hyperthermia, rather than an exercise-induced hyperthermia.

The Quabbin controlled deer hunt 1991 - 2001: limitations of a controlled hunt

Science.gov (United States)

Beth E. Cohen; David K. Loomis

2003-01-01

The Quabbin Reservoir, built in the 1930's as a water supply for Boston, is an unfiltered source of water. The agency responsible for managing the reservoir wants it to remain unfiltered. As a result, human activity is kept to a minimum, including (until recently) a prohibition on hunting. The lack of natural predators and the ban on recreational hunting allowed...

Bifunctional, Chemically Patterned Flat Stamps for Microcontact Printing of Polar Inks

NARCIS (Netherlands)

Duan, X.; Sadhu, V.B.; Perl, A.; Péter, M.; Reinhoudt, David; Huskens, Jurriaan

2008-01-01

Different methods to create chemically patterned, flat PDMS stamps with two different chemical functionalities were compared. The best method for making such stamps, functionalized with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFDTS) and 3-(aminopropyl)triethoxysilane (APTS), appeared to be full

Hunting for Ecological Learning

Science.gov (United States)

Pontius, Joel B.; Greenwood, David A.; Ryan, Jessica L.; Greenwood, Eli A.

2013-01-01

Considering (a) the many potential connections between hunting, culture, and environmental thought, (b) how much hunters have contributed to the conservation movement and to the protection of a viable land base, and (c) renewed interest in hunting as part of the wider movement toward eating local, non-industrialized food, we seek to bring hunting…

Hunting with lead: association between blood lead levels and wild game consumption.

Science.gov (United States)

Iqbal, Shahed; Blumenthal, Wendy; Kennedy, Chinaro; Yip, Fuyuen Y; Pickard, Stephen; Flanders, W Dana; Loringer, Kelly; Kruger, Kirby; Caldwell, Kathleen L; Jean Brown, Mary

2009-11-01

Wild game hunting is a popular activity in many regions of the United States. Recently, the presence of lead fragments in wild game meat, presumably from the bullets or shot used for hunting, has raised concerns about health risks from meat consumption. This study examined the association between blood lead levels (PbB) and wild game consumption. We recruited 742 participants, aged 2-92 years, from six North Dakota cities. Blood lead samples were collected from 736 persons. Information on socio-demographic background, housing, lead exposure source, and types of wild game consumption (i.e., venison, other game such as moose, birds) was also collected. Generalized estimating equations (GEE) were used to determine the association between PbB and wild game consumption. Most participants reported consuming wild game (80.8%) obtained from hunting (98.8%). The geometric mean PbB were 1.27 and 0.84 microg/dl among persons who did and did not consume wild game, respectively. After adjusting for potential confounders, persons who consumed wild game had 0.30 microg/dl (95% confidence interval: 0.16-0.44 microg/dl) higher PbB than persons who did not. For all game types, recent (game consumption was associated with higher PbB. PbB was also higher among those who consumed a larger serving size (> or = 2 oz vs. game' consumption only. Participants who consumed wild game had higher PbB than those who did not consume wild game. Careful review of butchering practices and monitoring of meat-packing processes may decrease lead exposure from wild game consumption.

41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

Investigating Rates of Hunting and Survival in Declining European Lapwing Populations.

Directory of Open Access Journals (Sweden)

Guillaume Souchay

Full Text Available Understanding effects of harvest on population dynamics is of major interest, especially for declining species. European lapwing Vanellus vanellus populations increased from the 1960s until the 1980s and declined strongly thereafter. About 400,000 lapwings are harvested annually and it is thus of high conservation relevance to assess whether hunting was a main cause for the observed changes in lapwing population trends. We developed a multi-event cause-specific mortality model which we applied to a long-term ring-recovery data set (1960-2010 of > 360,000 records to estimate survival and cause-specific mortalities. We found no temporal change in survival over the last 50 years for first-year (FY and older birds (after first-year; AFY originating from different ringing areas. Mean survival was high, around 0.60 and 0.80 for FY and AFY individuals, respectively. The proportion of total mortality due to hunting was <0.10 over the study period and the estimated proportion of harvested individuals (kill rate was <0.05 in each year. Our result of constant survival indicates that demographic processes other than survival were responsible for the pronounced change in lapwing population trends in the 1980s. Our findings lend support to the hypothesis that hunting was not a significant contributor to the large-scale decline of lapwing populations. To halt the ongoing decline of European lapwing populations management should focus on life history stages other than survival (e.g. productivity. Further analyses are required to investigate the contribution of other demographic rates to the decline of lapwings and to identify the most efficient conservation actions.

Rgyas bzang Tibetan Tribe Hunting Lore

OpenAIRE

Bkra shis dpal 'bar

2011-01-01

The Yul shul (Yushu) Rgyas bzang Tribe historically possessed a rich hunting tradition. Wildlife was hunted for food and other animal products. By 2007, hunting culture had diminished due to improvements in living conditions, wildlife protection laws, greater state control of wildlife product skin market and gun ownership, animal diseases, and the absence of such wildlife as wild yaks in local areas.

Dark or short nights: differential latitudinal constraints in nestling provisioning patterns of a nocturnally hunting bird species.

Directory of Open Access Journals (Sweden)

Markéta Zárybnická

Full Text Available In diurnal bird species, individuals breeding at high latitudes have larger broods than at lower latitudes, which has been linked to differences in the daily time available for foraging. However, it remains unclear how latitude is linked with parental investment in nocturnal species. Here, we investigate nestling provisioning rates of male Tengmalm's owls in two populations at different latitudes (Czech Republic 50 °N; Finland 63 °N with the help of cameras integrated into nest boxes. Clutch sizes were smaller in the Czech population (CZ: 5.1 ± 0.1; FIN: 6.6 ± 0.1, but given the higher nestling mortality in the Finnish population, the number of fledglings did not differ between the two populations (CZ: 3.5 ± 0.3; FIN: 3.9 ± 0.2. Nestling provisioning patterns varied within days, over the reproductive season and between the two sites. Males delivered most food at dusk and dawn, having peak delivery rates at sun angles of -11° to -15° at both sites, and males increased the prey delivery rates with higher nestling requirements. Given the longer nights during summer in the Czech Republic compared to Finland, Czech males only showed a small shift in their delivery peak during the night from -17° in April to -14° in July. In contrast, Finnish males shifted their peak of prey delivery from -11° in April to -1° in July. Consequently, Czech males had a longer hunting time per night around midsummer when feeding young (360 min than Finnish males (270 min. This suggests that nocturnal owl species in northern populations are constrained by the short nights during the breeding season, which can limit the number of young they can raise. Moreover, owls in northern populations are additionally constrained through the unpredictable changes in food availability between years, and both these factors are likely to influence the reproductive investment between populations.

Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

Science.gov (United States)

Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

2016-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

Time-stamping system for nuclear physics experiments at RIKEN RIBF

International Nuclear Information System (INIS)

Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

2015-01-01

A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

Comparison between Laser and Stamping without Die (SWD for Micro Tapered Hole Forming

Directory of Open Access Journals (Sweden)

Yung-Chou Hung

2016-03-01

Full Text Available The forming of a micro tapered hole is based on nanosecond pulsed laser processing, which conforms to fast processing time and high throughput; however, the microhole quality should be improved. Micro stamping is a technology providing high precise size and speed. The greatest difficulty in forming a microhole by micro stamping is the precision alignment of the punch head to the lower die. In order to overcome the difficulty, we proposed a concept of stamping without die (SWD. Without a lower die, the tapered punch head was directly applied to the workpiece for micro stamping, and a thicker workpiece surrounding the punching area provides a better support to the stamping process. Thus, a successful forming of micro tapered holes is completed. The micro tapered hole depth is 300 μm, and the maximum ratio of inlet to outlet diameter is 18:1. In order to reduce the number of experiments, the finite element analysis software DEFORM-3D was used for forming analysis. The simulation forecast result was compared with the experimental processing, which was well validated. Under different experimental parameters of laser energy and defocusing distance, drilling results by two methods show that the microhole quality by stamping process is better than by laser processing.

Characteristic Evaluation of Organic Light-Emitting Diodes Prepared with Stamp Printing Technique

Directory of Open Access Journals (Sweden)

Apisit Chittawanij

2017-01-01

Full Text Available We have reported on a stamp printing technique that uses PET release film as a printing stamp to deposit TPBi thin film served as the electron transport layer of the organic light-emitting diodes. TPBi thin film was printed with a good uniformity and resolution. Effect of deposition conditions on optical and electrical properties and surface roughness of TPBi thin film have been studied under spectroscopy and atomic force microscopy, respectively. It is found that characteristic of TPBi thin film is improved via controlled stamp temperature and time. Since TPBi thin film exhibits the surface morphology comparable to that of conventional spin-coating thin film, our findings suggest that PET release film-based stamp printing approach is possible to use as an alternative deposition of the organic thin film as compared with a traditional one.

50 CFR 32.71 - United States Unincorporated Pacific Insular Possessions.

Science.gov (United States)

2010-10-01

.... Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting. [Reserved] D. Sport Fishing. [Reserved] Midway Atoll National Wildlife Refuge A. Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting. [Reserved] D. Sport Fishing. [Reserved...

Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

Directory of Open Access Journals (Sweden)

Liu Xiaochuan

2015-01-01

Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

50 CFR 32.69 - Wisconsin.

Science.gov (United States)

2010-10-01

... Refuge A. Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting... are 12-15 years of age, and by permit. C. Big Game Hunting. We allow hunting of white-tailed deer on... fishing. Leopold Wetland Management District A. Migratory Game Bird Hunting. We allow hunting of migratory...

Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

Directory of Open Access Journals (Sweden)

Ji Kang

2016-01-01

Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

A rapid co-culture stamping device for studying intercellular communication

Science.gov (United States)

Hassanzadeh-Barforoushi, Amin; Shemesh, Jonathan; Farbehi, Nona; Asadnia, Mohsen; Yeoh, Guan Heng; Harvey, Richard P.; Nordon, Robert E.; Warkiani, Majid Ebrahimi

2016-10-01

Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two adherent cell lines with well-defined interlacing configurations to study cell-cell interactions. We demonstrate post-stamping cell viability of >95%, the stamping of multiple adherent cell types, and the ability to control the seeded cell density. We also show viability, proliferation and migration of cultured cells, enabling analysis of co-culture boundary conditions on cell fate. We also developed an in-vitro model of endothelial and cardiac stem cell interactions, which are thought to regulate coronary repair after myocardial injury. The stamp is fabricated using microfabrication techniques, is operated with a lab pipettor and uses very low reagent volumes of 20 μl with cell injection efficiency of >70%. This easy-to-use device provides a general strategy for micro-patterning of multiple cell types and will be important for studying cell-cell interactions in a multitude of applications.

Wildlife reserves, populations, and hunting outcome with smart wildlife

DEFF Research Database (Denmark)

Jensen, Frank; Jacobsen, Jette Bredahl; Strange, Niels

2014-01-01

We consider a hunting area and a wildlife reserve and answer the question: How does clever migration decision affect the social optimal and the private optimal hunting levels and population stocks? We analyze this in a model allowing for two-way migration between hunting and reserve areas, where...... the populations’ migration decisions depend on both hunting pressure and relative population densities. In the social optimum a pure stress effect on the behavior of smart wildlife exists. This implies that the population level in the wildlife reserve tends to increase and the population level in the hunting area...... and hunting levels tend to decrease. On the other hand, the effect on stock tends to reduce the population in the wildlife reserve and increase the population in the hunting area and thereby also increase hunting. In the case of the private optimum, open-access is assumed and we find that the same qualitative...

Place Of Hunting Tourism In The Structure Of Modern Tourism Types

Directory of Open Access Journals (Sweden)

Ioan Petroman

2015-10-01

Full Text Available From an economic and socialpoint of view, hunting tourism has two sub-categories: resident hunting andtourism hunting (for the travellers who travel long distances to participate inhunting. Tourism hunting covers six types of tourism: subsistence indigenoushunting, traditional hunting, commercial hunting, recreational-sport hunting,integrated hunting, and optimum level game maintenance hunting. Huntingtourists should be classified into three distinct categories: large gamehunting tourists (for whom what matters is adventure and trophies, small gamehunting tourists (interested in the hunting experience, and experiencedhunting tourists (characterised by the use of frontal charge guns or arrowshooting. Hunting tourism can be considered a sub-category of nature tourismbecause it contributes to the preservation of area biodiversity, of culturaltourism as educational, cultural activity, and of sustainable tourism inprotected areas (ecotourism whose hunting tourism sub-category is trophyhunting

AHP 35: Tibetan Marmot Hunting

Directory of Open Access Journals (Sweden)

Sangs rgyas bkra shis སངས་རྒྱས་བཀྲ་ཤིས།

2015-02-01

Full Text Available This paper focuses on the hunting, cooking, and eating of marmots among pastoralists in Gcan tsha thang (Jianzhatan Township, Gcan tsha (Jianzha County, Mtsho sngon (Qinghai Province, PR China. Folklore positing a connection between humans and marmots is discussed and Sangs rgyas bkra shis provides a story about local marmot hunters and gives accounts from his paternal grandmother (Pa 10 skyid, b. 1941 about marmot hunting in 1958. A conclusion suggests directions for future research. Accounts of marmot hunting and marmot product use from Yul shul (Yushu and Dkar mdzes (Ganzi Tibetan autonomous prefectures, a map of Mtsho sngon, and six photographs provide further detail.

A novel hunting accident. Discharge of a firearm by a hunting dog.

Science.gov (United States)

Baker, A M; Keller, G; Garcia, D

2001-09-01

The authors report the case of a 21-year-old man who was killed while duck hunting when a shotgun accidentally discharged, shooting him in the head. The loaded weapon, which had been lying on the ground with the safety off and the muzzle pointed toward a river a few feet away, discharged when a hunting dog stepped on the trigger. Scene investigation confirmed that the victim had been standing in the river, planting decoys, with his head approximately level with the adjacent bank. Autopsy examination and ballistic testing confirmed a range of fire consistent with the witness' statements. Examination of the weapon in question documented a light trigger pull but no mechanical defects. The authors review the epidemiology and causality of hunting accidents and discuss the various safety rules that were violated in this highly unusual case. The importance of a complete death investigation, including autopsy, when dealing with a firearm death is emphasized.

Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

International Nuclear Information System (INIS)

Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

2016-01-01

In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

Science.gov (United States)

Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

2016-02-01

In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

Directory of Open Access Journals (Sweden)

Asiyeh Amouei

2018-02-01

Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

Science.gov (United States)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

Mourning dove population trend estimates from Call-Count and North American Breeding Bird Surveys

Science.gov (United States)

Sauer, J.R.; Dolton, D.D.; Droege, S.

1994-01-01

The mourning dove (Zenaida macroura) Callcount Survey and the North American Breeding Bird Survey provide information on population trends of mourning doves throughout the continental United States. Because surveys are an integral part of the development of hunting regulations, a need exists to determine which survey provides precise information. We estimated population trends from 1966 to 1988 by state and dove management unit, and assessed the relative efficiency of each survey. Estimates of population trend differ (P lt 0.05) between surveys in 11 of 48 states; 9 of 11 states with divergent results occur in the Eastern Management Unit. Differences were probably a consequence of smaller sample sizes in the Callcount Survey. The Breeding Bird Survey generally provided trend estimates with smaller variances than did the Callcount Survey. Although the Callcount Survey probably provides more withinroute accuracy because of survey methods and timing, the Breeding Bird Survey has a larger sample size of survey routes and greater consistency of coverage in the Eastern Unit.

DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

Directory of Open Access Journals (Sweden)

Rudi Kurniawan Arief

2017-12-01

Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

Tolosa-Hunt Syndrome in Double-Hit Lymphoma

Directory of Open Access Journals (Sweden)

Prakash Peddi

2015-01-01

Full Text Available Tolosa-Hunt syndrome (THS is a painful condition characterized by hemicranial pain, retroorbital pain, loss of vision, oculomotor nerve paralysis, and sensory loss in distribution of ophthalmic and maxillary division of trigeminal nerve. Lymphomas rarely involve cavernous sinus and simulate Tolosa-Hunt syndrome. Here we present a first case of double-hit B cell lymphoma (DHL relapsing and masquerading as Tolosa-Hunt syndrome. The neurological findings were explained by a lymphomatous infiltration of the right Gasserian ganglion which preceded systemic relapse. As part of this report, the diagnostic criteria for Tolosa-Hunt syndrome and double-hit lymphoma are reviewed and updated treatment recommendations are presented.

Determination of Proper Austenitization Temperatures for Hot Stamping of AISI 4140 Steel

Science.gov (United States)

Samadian, Pedram; Parsa, Mohammad Habibi; Shakeri, Amid

2014-04-01

High strength steels are desirable materials for use in automobile bodies in order to reduce vehicle weight and increase the safety of car passengers, but steel grades with high strength commonly show poor formability. Recently, steels with controlled microstructures and compositions are used to gain adequate strength after hot stamping while maintaining good formability during processing. In this study, microstructure evolutions and changes in mechanical properties of AISI 4140 steel sheets resulting from the hot stamping process at different austenitization temperatures were investigated. To determine the proper austenitization temperatures, the results were compared with those of the cold-worked and cold-worked plus quench-tempered specimens. Comparisons showed that the austenitization temperatures of 1000 and 1100 °C are proper for hot stamping of 3-mm-thick AISI 4140 steel sheets due to the resultant martensitic microstructure which led to the yield and ultimate tensile strength of 1.3 and 2.1 GPa, respectively. Such conditions resulted in more favorable simultaneous strength and elongation than those of hot-stamped conventional boron steels.

Deforestation and hunting effects on wildlife across Amazonian indigenous lands

Directory of Open Access Journals (Sweden)

Pedro de Araujo Lima. Constantino

2016-06-01

Full Text Available Deforestation and hunting are main wildlife threats in Amazonia, affecting the ecosystem and dwellers that rely on game meat. Data from 9109 hunted animals from 35 villages of 8 Pano indigenous lands in Brazilian Amazonia were used to build 4 indicators of wildlife status based on ecological models and to analyze the effects of deforestation, hunting pressure, and socioeconomic aspects on wildlife variation. Although variation in wildlife status indicated depletion in certain locations, hunters from most villages continued to hunt their preferred game after decades of intensive hunting. Indigenous hunting resulted in local depletion of species because of the dispersal of animals away from the source of hunting. This local effect can be explained by the permanent hunting of wildlife in the region, the behavior of Pano hunters, and the design and scale of this study analysis. Regionally, however, deforestation and associated factors are the cause of reduced population density and hunting success, extirpating sensitive species. Roads exacerbated hunting effects through disturbance, encroachment, and provision of access to livestock meat at markets. To avoid local depletion, indigenous people must review their subsistence hunting practices, whereas to achieve regional wildlife conservation and to maintain indigenous societies in Amazonia, wildlife habitat loss should be limited.

Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

Directory of Open Access Journals (Sweden)

Nosova Ekaterina

2017-01-01

Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

Science.gov (United States)

Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

2017-12-01

Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

27 CFR 46.116 - Issuance, distribution, and examination of special tax stamps.

Science.gov (United States)

2010-04-01

... multiple locations, TTB will send to the taxpayer's principal place of business (or principal office in the... attachment to TTB Form 5630.5t required by § 46.101(b)(2). (b) Distribution of special tax stamps for... for each location listed on the attachment to TTB Form 5630.5t and that the information on each stamp...

Kinetic and kinematic analysis of stamping impacts during simulated rucking in rugby union.

Science.gov (United States)

Oudshoorn, Bodil Y; Driscoll, Heather F; Dunn, Marcus; James, David

2018-04-01

Laceration injuries account for up to 23% of injuries in rugby union. They are frequently caused by studded footwear as a result of a player stamping onto another player during the ruck. Little is known about the kinetics and kinematics of rugby stamping impacts; current test methods assessing laceration injury risk of stud designs therefore lack informed test parameters. In this study, twelve participants stamped on an anthropomorphic test device in a one-on-one simulated ruck setting. Velocity and inclination angle of the foot prior to impact was determined from high-speed video footage. Total stamping force and individual stud force were measured using pressure sensors. Mean foot inbound velocity was 4.3 m ∙ s -1 (range 2.1-6.3 m ∙ s -1 ). Mean peak total force was 1246 N and mean peak stud force was 214 N. The total mean effective mass during stamping was 6.6 kg (range: 1.6-13.5 kg) and stud effective mass was 1.2 kg (range: 0.5-2.9 kg). These results provide representative test parameters for mechanical test devices designed to assess laceration injury risk of studded footwear for rugby union.

A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

Science.gov (United States)

Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

2011-08-01

Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

MAP SERVICES FOR MANAGEMENT OF HUNTING ORGANIZATIONS (THE CASE OF HUNTING ORGANIZATION “MEDVEDICA”

Directory of Open Access Journals (Sweden)

S. A. Zaichenko

2013-01-01

Full Text Available The current state map support of the system of hunting management requires updating an information database and the creation of new schemes of hunting organization. In this case the beneficial is using of satellite imagery data for the mapping and also for important environmental research. Presentation of the results in the form of Internet web services provides broad benefits to the paper version of the maps.

Foraging behavior of selected insectivorous birds in Cauvery Delta region of Nagapattinam District, Tamil Nadu, India

Directory of Open Access Journals (Sweden)

S. Asokan

2010-02-01

Full Text Available This paper reports the foraging behavior of five insectivorous birds, namely White-breasted Kingfisher Halcyon smyrnensis, Small Bee-eater Merops orientalis, Indian Roller Coracias benghalensis, Common Myna Acridotheres tristis and Black Drongo Dicrurus macrocercus in Nagapattinam District of Tamil Nadu, India. The birds used a variety of perch types for hunting insect prey; in general the electric power line was a common perch type used by all species except the Common Myna. The perching and foraging height used by birds were classified into 3 meter categories, up to 12m. Aerial feeding or hawking in Bee-eaters and ground feeding in Common Mynas were major feeding techniques, recorded 68% and 86% of the time respectively. The other three species used gleaning as a feeding technique. The highest niche overlap was recorded between Indian Rollers and Black Drongos and between White-breasted Kingfishers and Indian Rollers.

Characterization of thermoplastic composites for hot stamp forming

NARCIS (Netherlands)

Rietman, Bert; Grouve, Wouter; Akkerman, Remko

2014-01-01

This paper describes state-of-the-art characterization methods for thermoplastic composites at high processing temperature and provides a few examples of application in simulations of the hot stamp forming process.

Ethical aspects of hunting tourism in Serbia

OpenAIRE

Prentović Risto

2013-01-01

The aim of this paper is to examine contemporary moral controversies about hunting tourism in Serbia in the context of defined value orientations and norms of ethics of hunting tourism, as a branch of applied ethics. On the one hand, this paper summarizes conceptual definitions and specificities of hunting tourism, as a special form of tourism, and the crucial value postulates derived from the assumptions of the concept of sustainable development and biodiv...

Fabrication of Ni stamp with high aspect ratio, two-leveled, cylindrical microstructures using dry etching and electroplating

DEFF Research Database (Denmark)

Petersen, Ritika Singh; Keller, Stephan Sylvest; Hansen, Ole

2015-01-01

obtained by defining a reservoir and a separating trench with different depths of 85 and 125 μm, respectively, in a single embossing step. The fabrication of the required two leveled stamp is done using a modified DEEMO (dry etching, electroplating and molding) process. Dry etching using the Bosch process...... and electroplating are optimized to obtain a stamp with smooth stamp surfaces and a positive sidewall profile. Using this stamp, hot embossing is performed successfully with excellent yield and high replication fidelity....

Identity-driven differences in stakeholder concerns about hunting wolves.

Science.gov (United States)

Lute, Michelle L; Bump, Adam; Gore, Meredith L

2014-01-01

Whereas past wolf management in the United States was restricted to recovery, managers must now contend with publicly contentious post-recovery issues including regulated hunting seasons. Understanding stakeholder concerns associated with hunting can inform stakeholder engagement, communication, and policy development and evaluation. Social identity theory (SIT) has been used to understand how groups interact, why they conflict, and how collaboration may be achieved. Applying SIT to stakeholder conflicts about wolf hunting may help delineate groups according to their concern about, support for or opposition to the policy choice of hunting wolves. Our objective was to assess concerns about hunting as a tool to resolve conflict in Michigan, using SIT as a framework. We used a mixed-modal sampling approach (e.g., paper, Internet) with wolf hunting-related public meeting participants in March 2013. Survey questions focused on 12 concerns previously identified as associated with hunting as a management tool to resolve conflict. Respondents (n  =  666) cared greatly about wolves but were divided over hunting wolves. Wolf conflicts, use of science in policy decisions, and maintaining a wolf population were the highest ranked concerns. Principle components analysis reduced concerns into three factors that explained 50.7% of total variance; concerns crystallized over justifications for hunting. General linear models revealed a lack of geographic influence on care, fear and support for hunting related to wolves. These findings challenge assumptions about regional differences and suggest a strong role for social identity in driving dichotomized public perceptions in wildlife management.

A Case of Ramsay Hunt Syndrome with Atypical Presentation

Directory of Open Access Journals (Sweden)

Kamil KAYAYURT

2014-09-01

Full Text Available SUMMARY: Ramsay Hunt syndrome is a rare complication of herpes zoster which results from the reactivation of the latent varicella-zoster virus in the geniculate ganglion. Although facial nerve is the most common affected nerve in Ramsay Hunt syndrome, other cranial and cervical nerves can also be affected. We present an atypical case of Ramsay Hunt syndrome in a 42-year-old male, with cervical nerve involvement. As spontaneous recovery rate in Ramsay Hunt syndrome is low, early diagnosis and treatment plays a key role in full recovery of paralysis. ÖZET: Ramsay Hunt sendromu, varisella-zoster virüsün latent olarak kaldığı genikulat ganglionda aktifleşmesiyle oluşan herpes zosterin nadir bir komplikasyonudur. Ramsay Hunt sendromunda fasiyal sinir en sık etkilenen sinir olmasına rağmen diğer kraniyal sinirler ve servikal sinirler de tutulabilir. Bu yazıda, 42 yaşındaki erkek hastada servikal tutulumun da eşlik ettiği atipik bir Ramsay Hunt sedromu olgusu sunuldu. Ramsay Hunt sedromunda spontan iyileşme oranları düşük olduğundan bu hastaların tanılarının erken dönemde konması ve tedavilerinin hemen başlanması paralizinin tam olarak iyileşmesinde kilit role sahiptir. Key words: Facial palsy, Ramsay Hunt syndrome, varicella-zoster virus, Anahtar sözcükler: Fasiyal paralizi, Ramsay Hunt sendromu, varisella-zoster virüs

Identity-driven differences in stakeholder concerns about hunting wolves.

Directory of Open Access Journals (Sweden)

Michelle L Lute

Full Text Available Whereas past wolf management in the United States was restricted to recovery, managers must now contend with publicly contentious post-recovery issues including regulated hunting seasons. Understanding stakeholder concerns associated with hunting can inform stakeholder engagement, communication, and policy development and evaluation. Social identity theory (SIT has been used to understand how groups interact, why they conflict, and how collaboration may be achieved. Applying SIT to stakeholder conflicts about wolf hunting may help delineate groups according to their concern about, support for or opposition to the policy choice of hunting wolves. Our objective was to assess concerns about hunting as a tool to resolve conflict in Michigan, using SIT as a framework. We used a mixed-modal sampling approach (e.g., paper, Internet with wolf hunting-related public meeting participants in March 2013. Survey questions focused on 12 concerns previously identified as associated with hunting as a management tool to resolve conflict. Respondents (n  =  666 cared greatly about wolves but were divided over hunting wolves. Wolf conflicts, use of science in policy decisions, and maintaining a wolf population were the highest ranked concerns. Principle components analysis reduced concerns into three factors that explained 50.7% of total variance; concerns crystallized over justifications for hunting. General linear models revealed a lack of geographic influence on care, fear and support for hunting related to wolves. These findings challenge assumptions about regional differences and suggest a strong role for social identity in driving dichotomized public perceptions in wildlife management.

Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach

Directory of Open Access Journals (Sweden)

Tao Lin

2014-06-01

Full Text Available Hot stamping tools with cooling systems are the key facilities for hot stamping process of Ultrahigh strength steels (UHSS in automotive industry. Hot stamping tools have significant influence on the final microstructure and properties of the hot stamped parts. In serials production, the tools should be rapidly cooled by cooling water. Hence, design of hot stamping tools with cooling systems is important not only for workpieces of good quality but also for the tools with good cooling performance and long life. In this paper, a new multifield simulation method was proposed for the design of hot stamping tools with cooling system. The deformation of the tools was also analyzed by this method. Based on MpCCI (Mesh-based parallel Code Coupling Interface, thermal-fluid simulation and thermal-fluid-mechanical coupled simulation were performed. Subsequently, the geometrical parameters of the cooling system are investigated for the design. The results show that, both the distance between the ducts and the distance between the ducts and the tools loaded contour have significant influence on the quenching effect. And better quenching effect can be achieved with the shorter distance from the tool surface and with smaller distance between ducts. It is also shown that, thermal expansion is the main reason for deformation of the hot forming tools, which causes the distortion of the cooling ducts, and the stress concentration at corner of the ducts.

Bear-baiting may exacerbate wolf-hunting dog conflict.

Science.gov (United States)

Bump, Joseph K; Murawski, Chelsea M; Kartano, Linda M; Beyer, Dean E; Roell, Brian J

2013-01-01

The influence of policy on the incidence of human-wildlife conflict can be complex and not entirely anticipated. Policies for managing bear hunter success and depredation on hunting dogs by wolves represent an important case because with increasing wolves, depredations are expected to increase. This case is challenging because compensation for wolf depredation on hunting dogs as compared to livestock is less common and more likely to be opposed. Therefore, actions that minimize the likelihood of such conflicts are a conservation need. We used data from two US states with similar wolf populations but markedly different wolf/hunting dog depredation patterns to examine the influence of bear hunting regulations, bear hunter to wolf ratios, hunter method, and hunter effort on wolf depredation trends. Results indicated that the ratio of bear hunting permits sold per wolf, and hunter method are important factors affecting wolf depredation trends in the Upper Great Lakes region, but strong differences exist between Michigan and Wisconsin related in part to the timing and duration of bear-baiting (i.e., free feeding). The probability that a wolf depredated a bear-hunting dog increases with the duration of bear-baiting, resulting in a relative risk of depredation 2.12-7.22× greater in Wisconsin than Michigan. The net effect of compensation for hunting dog depredation in Wisconsin may also contribute to the difference between states. These results identified a potential tradeoff between bear hunting success and wolf/bear-hunting dog conflict. These results indicate that management options to minimize conflict exist, such as adjusting baiting regulations. If reducing depredations is an important goal, this analysis indicates that actions aside from (or in addition to) reducing wolf abundance might achieve that goal. This study also stresses the need to better understand the relationship among baiting practices, the effect of compensation on hunter behavior, and depredation

Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012

Directory of Open Access Journals (Sweden)

Joseph G.L. Lee

2017-12-01

Full Text Available Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties from June–October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s (<1%. However, a substantial minority of cigarette packs had damaged tax stamps (13%. This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser. Keywords: Taxes, Smoking, Tobacco products, Government regulation, Government

Walk-In Hunting Access (WIHA) Fall 2010

Data.gov (United States)

Kansas Data Access and Support Center — This shapefile represents the private lands leased by the Kansas Department of Wildlife and Parks for fall 2010 public hunting access through the Walk-In Hunting...

Walk-In Hunting Access (WIHA) Fall 2009

Data.gov (United States)

Kansas Data Access and Support Center — This shapefile represents the private lands leased by the Kansas Department of Wildlife and Parks for fall 2009 public hunting access through the Walk-In Hunting...

Walk-In Hunting Access (WIHA) Fall 2008

Data.gov (United States)

Kansas Data Access and Support Center — This shapefile represents the private lands leased by the Kansas Department of Wildlife and Parks for fall 2008 public hunting access through the Walk-In Hunting...

Hunting promotes sexual conflict in brown bears.

Science.gov (United States)

Gosselin, Jacinthe; Leclerc, Martin; Zedrosser, Andreas; Steyaert, Sam M J G; Swenson, Jon E; Pelletier, Fanie

2017-01-01

The removal of individuals through hunting can destabilize social structure, potentially affecting population dynamics. Although previous studies have shown that hunting can indirectly reduce juvenile survival through increased sexually selected infanticide (SSI), very little is known about the spatiotemporal effects of male hunting on juvenile survival. Using detailed individual monitoring of a hunted population of brown bears (Ursus arctos) in Sweden (1991-2011), we assessed the spatiotemporal effect of male removal on cub survival. We modelled cub survival before, during and after the mating season. We used three proxies to evaluate spatial and temporal variation in male turnover; distance and timing of the closest male killed and number of males that died around a female's home range centre. Male removal decreased cub survival only during the mating season, as expected in seasonal breeders with SSI. Cub survival increased with distance to the closest male killed within the previous 1·5 years, and it was lower when the closest male killed was removed 1·5 instead of 0·5 year earlier. We did not detect an effect of the number of males killed. Our results support the hypothesis that social restructuring due to hunting can reduce recruitment and suggest that the distribution of the male deaths might be more important than the overall number of males that die. As the removal of individuals through hunting is typically not homogenously distributed across the landscape, spatial heterogeneity in hunting pressure may cause source-sink dynamics, with lower recruitment in areas of high human-induced mortality. © 2016 The Authors. Journal of Animal Ecology published by John Wiley & Sons Ltd on behalf of British Ecological Society.

Soil Temperature and Moisture Profile (STAMP) System Handbook

Energy Technology Data Exchange (ETDEWEB)

Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-11-01

The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

Effects of surface coating on weld growth of resistance spot-welded hot-stamped boron steels

International Nuclear Information System (INIS)

Ji, Chang Wook; Lee, Hyun Ju; Kim, Yang Do; Jo, Il Guk; Choi, Il Dong; Park, Yeong Do

2014-01-01

Aluminum-silicon-based and zinc-based metallic coatings have been widely used for hot-stamped boron steel in automotive applications. In this study, resistance spot weldability was explored by investigating the effects of the properties of metallic coating layers on heat development and nugget growth during resistance spot welding. In the case of the aluminum-silicon-coated hot-stamped boron steel, the intermetallic coating transformed into a liquid film that covered the faying interface. A wide, weldable current range was obtained with slow heat development because of low contact resistance and large current passage. In the case of the zinc-coated hot-stamped boron steel, a buildup of liquid and vapor formation under large vapor pressure was observed at the faying interface because of the high contact resistance and low vaporization temperature of the intermetallic layers. With rapid heat development, the current passage was narrow because of the limited continuous layer at the faying interface. A more significant change in nugget growth was observed in the zinc coated hot-stamped boron steel than in the aluminum-silicon-coated hot-stamped boron steel.

Lead from hunting activities and its potential environmental threat to wildlife in a protected wetland in Yucatan, Mexico.

Science.gov (United States)

Arcega-Cabrera, Flor; Noreña-Barroso, Elsa; Oceguera-Vargas, Ismael

2014-02-01

This study provides insights into the status of lead in the protected wetland of El Palmar, located on the northwestern littoral of the Yucatan Peninsula. This reserve is ecologically and economically important because it provides feeding and breeding habitats for many species, as well as being an ecotourism destination (especially for bird watching). Although it is a protected area, duck species are heavily hunted within the reserve during the winter. As a result, animals feeding or living in sediments could be exposed to anthropogenic lead. Total lead and its geochemical fractionated forms were measured in sediment cores from six selected sites in "El Palmar" wetland, during pre- and post-hunting seasons, to approximate the potential environmental threat (especially for benthonic living/feeding organisms). Anthropogenic lead concentrations detected in soil cores ranged from below the minimum infaunal community effect level (30.24 μg g(-1)) during the pre-hunting season, to bordering the probable infaunal community effect level (112.18 μg g(-1)) during the post-hunting season, according to SquiiRTs NOAA guidelines. Yet, these results were lower than expected based on the intensity of hunting. Consequently, this article explores the possibility that the lower than expected lead concentration in sediments results from (1) degradation of shot and transformation to soluble or particulate forms; or (2) ingestion of lead shot by benthic and other lacustrine species living in the protected area. Geochemical fractionation of lead demonstrated that in the top 6 cm of the soil column at heavily active hunting sites (EP5 and EP6), lead was associated with the lithogenic fraction (average 45 percent) and with the organic fraction (average 20 percent). Bioavailable lead (sum of lead adsorbed to the carbonates, Fe/Mn oxyhydroxides and organic fractions) in sediments was lower than 50 percent for the heavily active hunting areas and higher for the rest of the sites

Hunting and fishing trends in the U.S.

Science.gov (United States)

J. John Charbonneau; James R. Lyons

1980-01-01

Trends in hunting and fishing participation are evaluated on the basis of responses to a telephone survey of the U.S. population conducted as a part of the 1975 National Hunting and Fishing Survey. Probability of participation in hunting and fishing is a function of the respondent's age, sex, income, place of residence, and a number of supply characteristics. The...

AHP 10: Rgyas bzang Tibetan Tribe Hunting Lore

OpenAIRE

Bkra shis dpal 'bar བཀྲ་ཤིས་དཔལ་འབར།

2011-01-01

The Yul shul (Yushu) ngas bzang Tribe historically possessed a rich hunting tradition. Wildlife was hunted for food and other animal products. By 2007, hunting culture had diminished due to improvements in living conditions, wildlife protection laws, greater state control of wildlife product skin market and gun ownership, animal diseases, and the absence of such wildlife as wild yaks in local areas.

STAMP model and its application prospect in DCS safety analysis of nuclear power plant

International Nuclear Information System (INIS)

Yang Xiaohua; Liu Jie; Liu Zhaohui; Liu Hua; Yu Tonglan

2013-01-01

The application of DCS (Digit Control System) is a certain trend for the development of nuclear power. DCS not only improves the control capability of nuclear power system, but also increases the complexity of the system. Traditional safety analysis techniques based on event-chain model are facing challenges. In order to improve the safety performance of nuclear power DCS, the latest research achievement in the field of safety engineering should be focused, studied and applied into nuclear power safety. This paper introduces a new safety analysis model named STAMP (Systems-Theoretic Accident Modeling and Processes) based on the system theory, analyzes its advantages and disadvantages compared with the traditional ones, and explains the basic steps of STPA (STAMP-Based Hazard Analysis) technology. Finally, according to the application status of STAMP at home and abroad, it prospects the development of STAMP in China's nuclear power safety. (authors)

Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

CERN Document Server

Lim, Yongseob; Ulsoy, A Galip

2014-01-01

Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

The hunting season’s over

CERN Document Server

2014-01-01

Hundreds of Internet users from across the globe have been scouring the Computer Centre for LEGO figurines in recent weeks (see here). The time has come to announce the results…   We’ve received nearly 5,000 screen-shots, the precious trophies gleaned from hours of virtual scavenging through the CERN Computing Centre, and we’re pleased to see our hunt raised so much interest. Unfortunately, rules being rules, we have to choose the two winners by drawing lots, so prizes will be winging their way to… Sarah Charley (CERN) Stefan Hayes We kindly thank everyone who took part in the hunt with so much gusto and hope you all had as much fun as we did! You can discover all the figurines here: http://lego-scavenger-hunt.web.cern.ch/ The CERN Bulletin team

Americans with Disabilities Act Scavenger Hunt

Science.gov (United States)

Ramsey, Ursula

2018-01-01

This article describes a scavenger hunt for Business Law students. Specifically, students compete in this scavenger hunt to identify accessible design features on campus to undergird their study of Title III of the Americans with Disabilities Act (ADA). Title III of the ADA prohibits public accommodations from discriminating on the basis of…

Sustainability and Long Term-Tenure: Lion Trophy Hunting in Tanzania.

Directory of Open Access Journals (Sweden)

Henry Brink

Full Text Available It is argued that trophy hunting of large, charismatic mammal species can have considerable conservation benefits but only if undertaken sustainably. Social-ecological theory suggests such sustainability only results from developing governance systems that balance financial and biological requirements. Here we use lion (Panthera leo trophy hunting data from Tanzania to investigate how resource ownership patterns influence hunting revenue and offtake levels. Tanzania contains up to half of the global population of free-ranging lions and is also the main location for lion trophy hunting in Africa. However, there are concerns that current hunting levels are unsustainable. The lion hunting industry in Tanzania is run by the private sector, although the government leases each hunting block to companies, enforces hunting regulation, and allocates them a species-specific annual quota per block. The length of these leases varies and theories surrounding property rights and tenure suggest hunting levels would be less sustainable in blocks experiencing a high turnover of short-term leases. We explored this issue using lion data collected from 1996 to 2008 in the Selous Game Reserve (SGR, the most important trophy hunting destination in Tanzania. We found that blocks in SGR with the highest lion hunting offtake were also those that experienced the steepest declines in trophy offtake. In addition, we found this high hunting offtake and the resultant offtake decline tended to be in blocks under short-term tenure. In contrast, lion hunting levels in blocks under long-term tenure matched more closely the recommended sustainable offtake of 0.92 lions per 1000 km2. However, annual financial returns were higher from blocks under short-term tenure, providing $133 per km2 of government revenue as compared to $62 per km2 from long-term tenure blocks. Our results provide evidence for the importance of property rights in conservation, and support calls for an overhaul

Sustainability and Long Term-Tenure: Lion Trophy Hunting in Tanzania.

Science.gov (United States)

Brink, Henry; Smith, Robert J; Skinner, Kirsten; Leader-Williams, Nigel

2016-01-01

It is argued that trophy hunting of large, charismatic mammal species can have considerable conservation benefits but only if undertaken sustainably. Social-ecological theory suggests such sustainability only results from developing governance systems that balance financial and biological requirements. Here we use lion (Panthera leo) trophy hunting data from Tanzania to investigate how resource ownership patterns influence hunting revenue and offtake levels. Tanzania contains up to half of the global population of free-ranging lions and is also the main location for lion trophy hunting in Africa. However, there are concerns that current hunting levels are unsustainable. The lion hunting industry in Tanzania is run by the private sector, although the government leases each hunting block to companies, enforces hunting regulation, and allocates them a species-specific annual quota per block. The length of these leases varies and theories surrounding property rights and tenure suggest hunting levels would be less sustainable in blocks experiencing a high turnover of short-term leases. We explored this issue using lion data collected from 1996 to 2008 in the Selous Game Reserve (SGR), the most important trophy hunting destination in Tanzania. We found that blocks in SGR with the highest lion hunting offtake were also those that experienced the steepest declines in trophy offtake. In addition, we found this high hunting offtake and the resultant offtake decline tended to be in blocks under short-term tenure. In contrast, lion hunting levels in blocks under long-term tenure matched more closely the recommended sustainable offtake of 0.92 lions per 1000 km2. However, annual financial returns were higher from blocks under short-term tenure, providing $133 per km2 of government revenue as compared to $62 per km2 from long-term tenure blocks. Our results provide evidence for the importance of property rights in conservation, and support calls for an overhaul of the system in

AHP 10: Rgyas bzang Tibetan Tribe Hunting Lore

Directory of Open Access Journals (Sweden)

Bkra shis dpal 'bar བཀྲ་ཤིས་དཔལ་འབར།

2011-06-01

Full Text Available The Yul shul (Yushu ngas bzang Tribe historically possessed a rich hunting tradition. Wildlife was hunted for food and other animal products. By 2007, hunting culture had diminished due to improvements in living conditions, wildlife protection laws, greater state control of wildlife product skin market and gun ownership, animal diseases, and the absence of such wildlife as wild yaks in local areas.

Bear-baiting may exacerbate wolf-hunting dog conflict.

Directory of Open Access Journals (Sweden)

Joseph K Bump

Full Text Available BACKGROUND: The influence of policy on the incidence of human-wildlife conflict can be complex and not entirely anticipated. Policies for managing bear hunter success and depredation on hunting dogs by wolves represent an important case because with increasing wolves, depredations are expected to increase. This case is challenging because compensation for wolf depredation on hunting dogs as compared to livestock is less common and more likely to be opposed. Therefore, actions that minimize the likelihood of such conflicts are a conservation need. METHODOLOGY/PRINCIPAL FINDINGS: We used data from two US states with similar wolf populations but markedly different wolf/hunting dog depredation patterns to examine the influence of bear hunting regulations, bear hunter to wolf ratios, hunter method, and hunter effort on wolf depredation trends. Results indicated that the ratio of bear hunting permits sold per wolf, and hunter method are important factors affecting wolf depredation trends in the Upper Great Lakes region, but strong differences exist between Michigan and Wisconsin related in part to the timing and duration of bear-baiting (i.e., free feeding. The probability that a wolf depredated a bear-hunting dog increases with the duration of bear-baiting, resulting in a relative risk of depredation 2.12-7.22× greater in Wisconsin than Michigan. The net effect of compensation for hunting dog depredation in Wisconsin may also contribute to the difference between states. CONCLUSIONS/SIGNIFICANCE: These results identified a potential tradeoff between bear hunting success and wolf/bear-hunting dog conflict. These results indicate that management options to minimize conflict exist, such as adjusting baiting regulations. If reducing depredations is an important goal, this analysis indicates that actions aside from (or in addition to reducing wolf abundance might achieve that goal. This study also stresses the need to better understand the relationship

Birds of a central São Paulo woodlot: 1. Censuses 1982-2000

Directory of Open Access Journals (Sweden)

E. O. WILLIS

Full Text Available Some 263 birds were recorded near and in a 230-ha patch of semideciduous forest in cane fields of central São Paulo, Brazil. Subtracting 67 open-area species, 22 of marshes or creeks, 10 vagrants and 12 recorded later, 152 forest and border species were recorded in 1982-86, much like what was observed in a similar woodlot near Campinas. Both woodlots lost species gradually over the years. Some birds avoided hard cane-field edges, preferring soft bushy edges. Of open-area species, 22 seemed to have disappeared by 1997 due to earlier high El Niño rains or rare permanently open habitats in the sugar cane; 17 new species were mostly nocturnal ones not noted earlier, or occasional visitors. Forest and borders lost 31 species, gaining five of dry regions and one winter visitor. Several migrants from the south appeared only in wet years before recent greenhouse effects, some resident birds were hunted, and canopy hummingbirds were perhaps still present. Dry-forest travel-prone or "metapopulational" species moved their centers of distribution, partly concealing loss of moist-forest diversity.

The Significance of Hunting : "The Bear" and "Delta Autumn"

OpenAIRE

海上, 順代; Nobuyo", "Unagami

2011-01-01

The aim of this paper is to discuss the significance of hunting in "The Bear" and "Delta Autumn", the fifth and sixth stories in William Faulkner‟s Go Down, Moses (1942). In this paper, I would like to show that hunting plays an important role in Faulkner's Southern society, referring to the studies of Maria Mies, a German sociologist. In her view, hunting is useful to a patriarchal society, which strictly distinguishes men from women. As a part of a social system, hunting succeeds in g...

Locomotion dynamics of hunting in wild cheetahs.

Science.gov (United States)

Wilson, A M; Lowe, J C; Roskilly, K; Hudson, P E; Golabek, K A; McNutt, J W

2013-06-13

Although the cheetah is recognised as the fastest land animal, little is known about other aspects of its notable athleticism, particularly when hunting in the wild. Here we describe and use a new tracking collar of our own design, containing a combination of Global Positioning System (GPS) and inertial measurement units, to capture the locomotor dynamics and outcome of 367 predominantly hunting runs of five wild cheetahs in Botswana. A remarkable top speed of 25.9 m s(-1) (58 m.p.h. or 93 km h(-1)) was recorded, but most cheetah hunts involved only moderate speeds. We recorded some of the highest measured values for lateral and forward acceleration, deceleration and body-mass-specific power for any terrestrial mammal. To our knowledge, this is the first detailed locomotor information on the hunting dynamics of a large cursorial predator in its natural habitat.

Trophy Hunting, Conservation, and Rural Development in Zimbabwe: Issues, Options, and Implications

Directory of Open Access Journals (Sweden)

Victor K. Muposhi

2016-01-01

Full Text Available Trophy hunting has potential to support conservation financing and contribute towards rural development. We conducted a systematic review of the Zimbabwean trophy hunting perspective spanning from pre-1890 to 2015, by examining the following: (1 evolution of legal instruments, administration, and governance of trophy hunting, (2 significance of trophy hunting in conservation financing and rural development, and (3 key challenges, emerging issues in trophy hunting industry, and future interventions. Our review shows that (i there has been a constant evolution in the policies related to trophy hunting and conservation in Zimbabwe as driven by local and international needs; (ii trophy hunting providing incentives for wildlife conservation (e.g., law enforcement and habitat protection and rural communities’ development. Emerging issues that may affect trophy hunting include illegal hunting, inadequate monitoring systems, and hunting bans. We conclude that trophy hunting is still relevant in wildlife conservation and rural communities’ development especially in developing economies where conservation financing is inadequate due to fiscal constraints. We recommend the promotion of net conservation benefits for positive conservation efforts and use of wildlife conservation credits for the opportunity costs associated with reducing trophy hunting off-take levels and promoting nonconsumptive wildlife use options.

Ramsay Hunt syndrome with severe dysphagia.

Science.gov (United States)

Coleman, Crystal; Fozo, Michael; Rubin, Adam

2012-01-01

Ramsay Hunt syndrome, first described by J. Ramsay Hunt in 1907, encompassed the symptoms of otalgia, erythematous vesicular rash on the auricle, and facial paralysis. Although rare, in some cases, the varicella zoster virus responsible for the illness can also be associated with involvement of cranial nerves III-XII, cervical nerves, aseptic meningitis, and the syndrome of inappropriate secretion of antidiuretic hormone. We present a case of a patient with clinical evidence of Ramsay Hunt syndrome involving the cranial nerves V, VII, VIII, X, and, possibly, XII. Pharyngeal wall and vocal fold paralysis, and severely reduced laryngeal elevation, resulted in such significant dysphagia that percutaneous endoscopic gastrostomy tube placement was required. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Trophy Hunting and Trophy Size in Ugalla Game Reserve, Western ...

African Journals Online (AJOL)

Trophy Hunting and Trophy Size in Ugalla Game Reserve, Western Tanzania. ... hunted in the Ugalla Game Reserve (UGR) of western Tanzania, in relation to hunting success (animals shot species-1 quota-1). ... AJOL African Journals Online.

EFFECTS OF EBT CUSTOMER SERVICE WAIVERS ON FOOD STAMP RECIPIENTS: EXECUTIVE SUMMARY

OpenAIRE

Kirlin, John A.; Logan, Christopher

2002-01-01

Most State agencies are now using electronic benefits transfer (EBT) systems to issue food stamp benefits. To promote operational efficiency, some States have received waivers of certain rules governing EBT use. An exploratory study was conducted to ascertain the effects of these waivers on food stamp recipients. The results show that two of the waivers-those allowing recipients to select their own personal identification numbers and to receive EBT training by mail rather than in person-cause...

Anuniatiq (Hunting).

Science.gov (United States)

Cleveland, Truman

This elementary language text, designed for children in bilingual Inupiat-English programs in the Alaskan villages of Ambler, Kobuk, Kiana, Noorvik, and Shungnak, contains fourteen passages about hunting in Alaska. Each page of text is illustrated with a black-and-white drawing. The English equivalent is given at the back and is not included in…

The Information Literacy of Survey Mark Hunting: A Dialogue

Directory of Open Access Journals (Sweden)

Jennifer Galas

2016-11-01

Full Text Available In Brief: This article makes connections between the ACRL Framework for Information Literacy for Higher Education and the activity of survey mark hunting. After a brief review of the literature related to geographic information systems (GIS, information literacy, and gamification of learning, the authors enter into a dialogue in which they discover and describe the various ways information literacy is both required by and developed through the recreational activity of survey mark hunting. Through their dialogue they found that the activity of survey mark hunting relies on the construction of both information and its authority in ways contextualized within the communities that participate; that survey mark hunting is a conversation that builds on the past, where lived experience counts as evidence; and, that survey mark hunting is both a metaphor and embodied enactment of information literacy.

Stamp design effect on 100 nm feature size for 8 inch NanoImprint lithography

International Nuclear Information System (INIS)

Landis, S; Chaix, N; Gourgon, C; Perret, C; Leveder, T

2006-01-01

Sub-100 nm resolution on a 200 mm silicon stamp has been hot embossed into commercial Sumitomo NEB 22 resist. A single pattern, exposed with electron beam lithography, has been considered to define the stamp and thus make it possible to point out the impact of stamp design on the printing. These results may be considered as a first attempt to define rules to solve the proximity printing effects (PPEs). Moreover, a large range of initial resist thickness, from 56 to 506 nm, has been spin coated to assess the effect of polymer flow properties for the stamp cavity filling and the printed defects. A detailed analysis of the printed resist in dense hole patterns showed that the application volume conservation is enough to calculate the residual layer thickness as the height of the printed resist feature. Good accordance has been obtained between the theoretical approach and experimental results. Moreover, the impact of the pattern symmetry breakdown on mould deformation is clearly shown in this paper in the printed areas as well as in the unprinted areas

Stamping of Thin-Walled Structural Components with Magnesium Alloy AZ31 Sheets

International Nuclear Information System (INIS)

Chen, F.-K.; Chang, C.-K.

2005-01-01

In the present study, the stamping process for manufacturing cell phone cases with magnesium alloy AZ31 sheets was studied using both the experimental approach and the finite element analysis. In order to determine the proper forming temperature and set up a fracture criterion, tensile tests and forming limit tests were first conducted to obtain the mechanical behaviors of AZ31 sheets at various elevated temperatures. The mechanical properties of Z31 sheets obtained from the experiments were then adopted in the finite element analysis to investigate the effects of the process parameters on the formability of the stamping process of cell phone cases. The finite element simulation results revealed that both the fracture and wrinkle defects could not be eliminated at the same time by adjusting blank-holder force or blank size. A drawbead design was then performed using the finite element simulations to determine the size and the location of drawbead required to suppress the wrinkle defect. An optimum stamping process, including die geometry, forming temperature, and blank dimension, was then determined for manufacturing the cell phone cases. The finite element analysis was validated by the good agreement between the simulation results and the experimental data. It confirms that the cell phone cases can be produced with magnesium alloy AZ31 sheet by the stamping process at elevated temperatures

Hunting with lead ammunition is not sustainable: European perspectives.

Science.gov (United States)

Kanstrup, Niels; Swift, John; Stroud, David A; Lewis, Melissa

2018-03-12

Much evidence demonstrates the adverse effects of lead ammunition on wildlife, their habitats and human health, and confirms that the use of such ammunition has no place within sustainable hunting. We identify the provisions that define sustainable hunting according to European law and international treaties, together with their guidance documents. We accept the substantial evidence for lead's actual and potential effects on wildlife, habitats and health as persuasive and assess how these effects relate to stated provisions for sustainability and hunting. We evaluate how continued use of lead ammunition negatively affects international efforts to halt loss of biodiversity, sustain wildlife populations and conserve their habitats. We highlight the indiscriminate and avoidable health and welfare impacts for large numbers of exposed wild animals as ethically unsustainable. In societal terms, continued use of lead ammunition undermines public perceptions of hunting. Given the existence of acceptable, non-toxic alternatives for lead ammunition, we conclude that hunting with lead ammunition cannot be justified under established principles of public/international policy and is not sustainable. Changing from lead ammunition to non-toxic alternatives will bring significant nature conservation and human health gains, and from the hunter's perspective will enhance societal acceptance of hunting. Change will create opportunities for improved constructive dialogue between hunting stakeholders and others engaged with enhancing biodiversity and nature conservation objectives.

Ethical acceptability of recreational hunting - does the motive of the hunter matter?

DEFF Research Database (Denmark)

Gamborg, Christian; Jensen, Frank Søndergaard; Sandøe, Peter

2016-01-01

Recreational hunting can be a way of taking responsibility for acquiring one’s own meat. However, many recreational hunters focus instead on hunting as a hobby or sport. This distinction, between two rather different motives for hunting, is relevant to the activity’s moral justifiability. The pub......Recreational hunting can be a way of taking responsibility for acquiring one’s own meat. However, many recreational hunters focus instead on hunting as a hobby or sport. This distinction, between two rather different motives for hunting, is relevant to the activity’s moral justifiability...

MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

Science.gov (United States)

Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

2014-01-01

It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

Science.gov (United States)

Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

2013-12-01

It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

International Nuclear Information System (INIS)

Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

2012-01-01

We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

9 CFR 93.104 - Certificate for pet birds, commercial birds, zoological birds, and research birds.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Certificate for pet birds, commercial birds, zoological birds, and research birds. 93.104 Section 93.104 Animals and Animal Products ANIMAL... (INCLUDING POULTRY) AND ANIMAL PRODUCTS IMPORTATION OF CERTAIN ANIMALS, BIRDS, FISH, AND POULTRY, AND CERTAIN...

Effect of British hunting ban on fox numbers.

Science.gov (United States)

Baker, Philip J; Harris, Stephen; Webbon, Charlotte C

2002-09-05

Pressure to ban the hunting of foxes with hounds in Britain has fuelled debate about its contribution to the control of fox populations. We took advantage of a nationwide one-year ban on fox-hunting during the outbreak of foot-and-mouth disease (FMD) in 2001 to examine this issue and found that the ban had no measurable impact on fox numbers in randomly selected areas. Our results argue against suggestions that fox populations would increase markedly in the event of a permanent ban on hunting.

The importance of hunting and hunting grounds for big and small game for tourism development in the basin of Crna Reka the Republic of Macedonia

OpenAIRE

Koteski, Cane; Jakovlev, Zlatko; Mitreva, Elizabeta; Angelkova, Tanja; Kitanov, Vladimir

2012-01-01

To show the hunting and hunting grounds for big and small game, the structure of the areas of certain hunting, fishing, fishing water objects, fish species, fishponds up to 20 years shown by municipalities and individual farms with ponds in the basin of Crna Reka.

49 CFR 238.119 - Rim-stamped straight-plate wheels.

Science.gov (United States)

2010-10-01

... input to the wheel during braking. (b) A rim-stamped straight-plate wheel shall not be used as a... that is periodically tread-braked for a short duration by automatic circuitry for the sole purpose of...

Virginia ESI: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for wading birds, shorebirds, waterfowl, raptors, diving birds, pelagic birds, passerine birds, and gulls...

Imprints of the Neolithic mind – clay stamps from the Republic of Macedonia

Directory of Open Access Journals (Sweden)

Goce Naumov

2008-12-01

Full Text Available The presence and unusual structure of clay stamps found in Neolithic settlements often give rise to multiple interpretations to define their character. The small dimensions and specific shape of the stamps suggests that these portable objects were important in the social relations and visual communication between members within the same community and, possibly, more distant communities. The definite patterns distinguishe their function in maintaining the visual traditions of the populations inhabiting southeastern Europe. They had an important role in building the Neolithic image modularity, so that they fitted into the comprehensive decorative structure of Neolithic iconography, and the patterns present on the stamps are related to several aspects of Neolithic material culture from the Balkans and Anatolia. This homogeneity of patterns indicates that they were actively included in the transposition of cognition into visual metaphors.

Selected radionuclides and heavy metals in skeletons of birds of prey from eastern Poland

International Nuclear Information System (INIS)

Komosa, A.; Chibowski, S.; Solecki, J.; Orzel, J.; Kitowski, I.; Rozanski, P.

2009-01-01

Results of determination of 137 Cs, 90 Sr, 40 K, 239+240 Pu, and heavy metals: Mn, Zn, Pb, Cd, Ni, Cr, Co, and Cu in skeletons of 15 species of birds of prey from Eastern Poland were presented. The greatest amounts of 137 Cs and 90 Sr (70 Bq/kg and 33 Bq/kg, respectively) were found in rough-legged buzzards (Buteo lagopus), winter visitors, coming from former soviet nuclear test places. Concentrations of 239+240 Pu in raptors were negligible, only lesser-spotted eagles (Aquila pomarina) revealed slightly higher values. Median concentrations of 137 Cs and 90 Sr in raptors which feed predominantly on small mammals were higher in comparison to concentrations found in other ones preferring different trophy. The most noticeable was a very high lead concentration (reaching above 600 mg/kg) in birds which utilize un-retrieved hunting casualties as their prey. (author)

Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

Science.gov (United States)

Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

2017-04-01

The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

Spatial and temporal variation in marine birds in the north Gulf of Alaska: The value of marine bird monitoring within Gulf Watch Alaska

Science.gov (United States)

Kuletz, Kathy J.; Esler, Daniel N.

2015-01-01

lingering oil, varied widely among species (see Esler et al., this report). Research and monitoring directed at documenting the timelines and mechanisms of wildlife recovery following the Exxon Valdez oil spill led to an unprecedented understanding of oil spill effects on marine birds, as well as previously unknown information about marine bird ecology in the northern GOA. Quantifying effects of anthropogenic influences requires an understanding of variation in marine bird abundance, distribution, and productivity, in relation to naturally occurring dynamics in marine environments continued marine bird work as part of Gulf Watch Alaska will facilitate this. In addition to their value as indicators of marine conditions and anthropogenic influences, marine birds are protected under the Migratory Bird Treaty Act and are managed by the U.S. Fish and Wildlife Service (USFWS). Marine birds have high societal value from a wide variety of interests (e.g., tourism, bird watching, hunting, mythology), and are an important source of subsistence foods in Alaska (Naves and Braem 2014). Because of the conservation interest in marine birds, as well as their value for indicating the status of marine ecosystems, monitoring of marine birds is an important component of many ocean monitoring programs, including Gulf Watch Alaska.

Environmental status of the Lake Michigan region. Volume 14. Birds of the Lake Michigan drainage basin

Energy Technology Data Exchange (ETDEWEB)

Wallace, G.J.

1977-07-01

This report characterizes the bird life found in 100 counties of the four states peripheral to Lake Michigan. It discusses major habitats (the Lake Michigan shoreline, inland lakes, rivers and streams, marshes, fields and open spaces, and woodlots) and associates specific birds with habitats according to preferences for space and food. It also discusses the special attributes of state parks and lakeshores, refuges and sanctuaries, and other special areas which are attractive to avifauna. Patterns of historical occurrence and abundance, and the influence of pesticides and pollution, disease, and hunting pressure are explored to place present occurrence in a modern perspective. Migration patterns are discussed to explain increases and decreases which occur in nonresident avifauna of the Basin. The distribution and habits of birds that occur regularly in the Basin are described in an annotated list; a more complete list is presented in a table which encapsulates data for rapid and convenient reference. Separate sections deal with extinct, extirpated, and introduced species, and with endangered, threatened, and declining species.

Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

Science.gov (United States)

Gundersen, Craig; Kreider, Brent

2008-01-01

Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

45 CFR 205.25 - Eligibility of supplemental security income beneficiaries for food stamps or surplus commodities.

Science.gov (United States)

2010-10-01

... beneficiaries for food stamps or surplus commodities. 205.25 Section 205.25 Public Welfare Regulations Relating....25 Eligibility of supplemental security income beneficiaries for food stamps or surplus commodities... XVI of the Social Security Act, the State agency shall make the following determinations: (1) The...

The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

Directory of Open Access Journals (Sweden)

Kaadyr-ool A. Bicheldey

2016-09-01

Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

Yield from an intensively hunted population of eastern fox squirrels

Science.gov (United States)

James S. Jordan; James S. Jordan

1971-01-01

Rates at which Eastern fox squirrels (Sciurus niger) are exploited in areas open to public hunting may be useful guides for designing fall hunting seasons that are biologically defensible. However, there is a question whether the harvest of fox squirrels by public hunting will even occasionally be great enough to challenge the limit allowed by the best designed...

Modeling the impacts of hunting on the population dynamics of red howler monkeys (Alouatta seniculus)

Science.gov (United States)

Wiederholt, Ruscena; Fernandez-Duque, Eduardo; Diefenbach, Duane R.; Rudran, Rasanayagam

2010-01-01

Overexploitation of wildlife populations occurs across the humid tropics and is a significant threat to the long-term survival of large-bodied primates. To investigate the impacts of hunting on primates and ways to mitigate them, we developed a spatially explicit, individual-based model for a landscape that included hunted and un-hunted areas. We used the large-bodied neotropical red howler monkey (Alouatta seniculus) as our case study species because its life history characteristics make it vulnerable to hunting. We modeled the influence of different rates of harvest and proportions of landscape dedicated to un-hunted reserves on population persistence, population size, social dynamics, and hunting yields of red howler monkeys. In most scenarios, the un-hunted populations maintained a constant density regardless of hunting pressure elsewhere, and allowed the overall population to persist. Therefore, the overall population was quite resilient to extinction; only in scenarios without any un-hunted areas did the population go extinct. However, the total and hunted populations did experience large declines over 100 years under moderate and high hunting pressure. In addition, when reserve area decreased, population losses and losses per unit area increased disproportionately. Furthermore, hunting disrupted the social structure of troops. The number of male turnovers and infanticides increased in hunted populations, while birth rates decreased and exacerbated population losses due to hunting. Finally, our results indicated that when more than 55% of the landscape was harvested at high (30%) rates, hunting yields, as measured by kilograms of biomass, were less than those obtained from moderate harvest rates. Additionally, hunting yields, expressed as the number of individuals hunted/year/km2, increased in proximity to un-hunted areas, and suggested that dispersal from un-hunted areas may have contributed to hunting sustainability. These results indicate that un-hunted

Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

Directory of Open Access Journals (Sweden)

Tadas Limba

2012-12-01

Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

Directory of Open Access Journals (Sweden)

Tadas Limba

2013-02-01

Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

Sustainable use of forest and hunting resources

Directory of Open Access Journals (Sweden)

Danilović Milorad

2014-01-01

Full Text Available This paper presents the issue of the use of forest and hunting resources in Serbia, with special emphasis on their sustainability. The use of modern technological solutions in terms of sustainable use of forest and hunting resources should be seen through an analysis and evaluation of environmental impacts. The existing machinery used in Serbian forestry cannot respond to the current demands of forestry production. However, the current unfavourable conditions can be significantly improved with appropriate measures. The planning of a network of roads including a number of factors that directly and indirectly affect sustainable use is of great importance for the development of forestry and hunting. Wood biomass in Serbian forests should be used in the manner and to the extent that ensures the sustainability of ecosystems and the production of large quantities of energy. In recent years, non-timber forest products have gained importance, so that the income generated from their use is growing. The impact of newly adopted laws and bylaws in the field of forestry, hunting and the protection of nature and environment will depend primarily on their application, control, execution and possible amendments and adjustments.

African wildlife conservation and the evolution of hunting institutions

Science.gov (United States)

't Sas-Rolfes, Michael

2017-11-01

Hunting regulation presents a significant challenge for contemporary global conservation governance. Motivated by various incentives, hunters may act legally or illegally, for or against the interests of conservation. Hunter incentives are shaped by the interactions between unevenly evolving formal and informal institutions, embedded in socio-ecological systems. To work effectively for conservation, regulatory interventions must take these evolving institutional interactions into account. Drawing on analytical tools from evolutionary institutional economics, this article examines the trajectory of African hunting regulation and its consequences. Concepts of institutional dynamics, fit, scale, and interplay are applied to case studies of rhinoceros and lion hunting to highlight issues of significance to conservation outcomes. These include important links between different forms of hunting and dynamic interplay with institutions of trade. The case studies reveal that inappropriate formal regulatory approaches may be undermined by adaptive informal market responses. Poorly regulated hunting may lead to calls for stricter regulations or bans, but such legal restrictions may in turn perversely lead to more intensified and organised illegal hunting activity, further undermining conservation objectives. I conclude by offering insights and recommendations to guide more effective future regulatory interventions and priorities for further research. Specifically, I advocate approaches that move beyond simplistic regulatory interventions toward more complex, but supportive, institutional arrangements that align formal and informal institutions through inclusive stakeholder engagement.

Assessing the sustainability of African lion trophy hunting, with recommendations for policy.

Science.gov (United States)

Creel, Scott; M'soka, Jassiel; Dröge, Egil; Rosenblatt, Eli; Becker, Matthew S; Matandiko, Wigganson; Simpamba, Twakundine

2016-10-01

While trophy hunting provides revenue for conservation, it must be carefully managed to avoid negative population impacts, particularly for long-lived species with low natural mortality rates. Trophy hunting has had negative effects on lion populations throughout Africa, and the species serves as an important case study to consider the balance of costs and benefits, and to consider the effectiveness of alternative strategies to conserve exploited species. Age-restricted harvesting is widely recommended to mitigate negative effects of lion hunting, but this recommendation was based on a population model parameterized with data from a well-protected and growing lion population. Here, we used demographic data from lions subject to more typical conditions, including source-sink dynamics between a protected National Park and adjacent hunting areas in Zambia's Luangwa Valley, to develop a stochastic population projection model and evaluate alternative harvest scenarios. Hunting resulted in population declines over a 25-yr period for all continuous harvest strategies, with large declines for quotas >1 lion/concession (~0.5 lion/1,000 km 2 ) and hunting of males younger than seven years. A strategy that combined periods of recovery, an age limit of ≥7 yr, and a maximum quota of ~0.5 lions shot/1,000 km 2 yielded a risk of extirpation lion trophy hunting with a combination of regulations. To implement sustainable trophy hunting while maintaining revenue for conservation of hunting areas, our results suggest that hunting fees must increase as a consequence of diminished supply. These findings are broadly applicable to hunted lion populations throughout Africa and to inform global efforts to conserve exploited carnivore populations. © 2016 by the Ecological Society of America.

Effect of hunting awareness on wild game meat purchase behavior

Directory of Open Access Journals (Sweden)

Maria Elena Marescotti

2018-06-01

Full Text Available Although wild game meat constitutes a sustainable and healthy alternative to conventional meat and hunting contributes to the control of game populations, international studies on consumer attitudes towards this type of meat are still limited and no previous research has been focused on the Italian population. For the development of successful marketing strategies and/or public policy intervention, the knowledge of consumers’ purchase behavior is a key factor. Among all the determinants that can influence the behavior of consumers of hunted wild game meat (i.e. animal welfare, sustainability, ecological food choice, product safety, nutritional quality, the consumers’ awareness of hunting activity and their perceptions of wild game meat assume a crucial role. Accordingly, in this paper an online survey on a sample of 741 Italian meat consumers has been conducted to investigate the relationship between consumers’ purchase behavior and their awareness of hunted game meat and hunting practices (chi-square test, F-test. Statistically significant differences were found among segments of consumers with different levels of wild game meat consumption frequency. The analysis shows that, as expected, the highest consumption level of wild game meat relates to the highest level of general awareness of wild game meat and hunting practices. Our findings are in line with previous literature, that links positive behaviors of consumers towards wild game meat and hunting to familiarity and experience with hunting and hunters. Nonetheless, the present study provides a deeper understanding of the Italian consumers’ attitudes and perceptions of wild game meat and could suggests policy guidelines for the development of future targeted marketing strategies.

Old World frog and bird vocalizations contain prominent ultrasonic harmonics

Science.gov (United States)

Narins, Peter M.; Feng, Albert S.; Lin, Wenyu; Schnitzler, Hans-Ulrich; Denzinger, Annette; Suthers, Roderick A.; Xu, Chunhe

2004-02-01

Several groups of mammals such as bats, dolphins and whales are known to produce ultrasonic signals which are used for navigation and hunting by means of echolocation, as well as for communication. In contrast, frogs and birds produce sounds during night- and day-time hours that are audible to humans; their sounds are so pervasive that together with those of insects, they are considered the primary sounds of nature. Here we show that an Old World frog (Amolops tormotus) and an oscine songbird (Abroscopus albogularis) living near noisy streams reliably produce acoustic signals that contain prominent ultrasonic harmonics. Our findings provide the first evidence that anurans and passerines are capable of generating tonal ultrasonic call components and should stimulate the quest for additional ultrasonic species.

Solid-state superionic stamping with silver iodide-silver metaphosphate glass

International Nuclear Information System (INIS)

Jacobs, K E; Hsu, K H; Han, X; Azeredo, B P; Ferreira, P M; Kumar, A; Fang, N X

2011-01-01

This paper demonstrates and analyzes the new use of the glassy solid electrolyte AgI-AgPO 3 for direct nanopatterning of thin silver films with feature resolutions of 30 nm. AgI-AgPO 3 has a high room temperature ionic conductivity with Ag + as the mobile ion, leading to silver etch/patterning rates of up to 20 nm s -1 at an applied bias of 300 mV. The glass can be melt-processed at temperatures below 200 deg. C, providing a facile and economical pathway for creating large area stamps, including the 25 mm 2 stamps shown in this study. Further, the glass is sufficiently transparent to permit integration with existing tools such as aligners and imprint tools, enabling high overlay registration accuracy and facilitating insertion into multi-step fabrication recipes.

Small forest holdings could be combined for hunting leases

Science.gov (United States)

John J. Stransky; Lowell K. Halls

1969-01-01

Most forest land acreage in the South is in small holdings. Much-needed hunting land, and income for rural landowners, could be provided by combining small forest holdings into large units and teasing the hunting rights.

76 FR 59304 - 2011-2012 Refuge-Specific Hunting and Sport Fishing Regulations; Correction

Science.gov (United States)

2011-09-26

..., upland game hunting, big game hunting, and sport fishing for the 2011-2012 season. Inadvertently, this...-0038; 93270-1265-0000-4A] RIN 1018-AX54 2011-2012 Refuge-Specific Hunting and Sport Fishing Regulations... our regulations concerning hunting and sport fishing programs at national wildlife refuges...

Failure Mechanisms of the Protective Coatings for the Hot Stamping Applications

Science.gov (United States)

Zhao, Chen

In the present study, four different nitriding techniques were carried on the ductile irons NAAMS-D6510 and cast steels NAAMS-S0050A, which are widely used stamping die materials; duplex treatments (PVD CrN coating+nitriding) were carried on H13 steels, which are common inserts for the hot stamping dies. Inclined impact-sliding wear tests were performed on the nitriding cases under simulated stamping conditions. Surface profilometer, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to investigate the wear and failure mechanisms of the protective coatings. It was found that the nitrided ductile iron samples performed better than the nitrided cast steel specimens. High temperature inclined impact-sliding wear tests were carried out on the CrN coatings. It was found that the coating performed better at elevated temperature. XPS analysis indicated the top surface layer (about 3-4nm) of the coating was oxidized at 400 °C and formed a Cr2O3 protective film. The in-situ formation of the thin Cr2O3 protective layer likely led to the change of wear mechanisms from severe adhesive failure to mild abrasive wear.

Martensitic microstructural transformations from the hot stamping, quenching and partitioning process

International Nuclear Information System (INIS)

Liu Heping; Jin Xuejun; Dong Han; Shi Jie

2011-01-01

Hot stamping, which combines forming and quenching in one process, produces high strength steels with limited ductility because the quenching is uncontrolled. A new processing technique has been proposed in which the hot stamping step is followed by a controlled quenching and partitioning process, producing a microstructure containing retained austenite and martensite. To investigate this microstructure, specimens were heated at a rate of 10 deg. C/s to the austenitizing temperature of 900 deg. C, held for 5 min to eliminate thermal gradients, and cooled at a rate of 50 deg. C/s to a quenching temperature of 300 deg. C, which is between the martensite start temperature and the martensite finish temperatures. The resulting microstructure was examined using optical microscope, scanning electron microscopy and transmission electron microscopy. The material produced contains irregular, fragmented martensite plates, a result of the improved strength of the austenite phase and the constraints imposed by a high dislocation density. - Research Highlights: → A novel heat treatment of advanced high strength steels is proposed. → The processing technique is hot stamping plus quenching and partitioning process. → The material produced contains irregular, fragmented martensite plates. → The reason is strength of austenite phase and constraint of dislocation density.

Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao, Jian; Chen, Wei; Xia, Z. Cedric

2005-01-01

Sheet metal stamping processes have been widely implemented in many industries due to its repeatability and productivity. In general, the simulations for a sheet metal forming process involve nonlinearity, complex material behavior and tool-material interaction. Instabilities in terms of tearing and wrinkling are major concerns in many sheet metal stamping processes. In this work, a sheet metal stamping process of a mild steel for a wheelhouse used in automobile industry is studied by using an explicit nonlinear finite element code and incorporating failure analysis (tearing and wrinkling) and design under uncertainty. Margins of tearing and wrinkling are quantitatively defined via stress-based criteria for system-level design. The forming process utilizes drawbeads instead of using the blank holder force to restrain the blank. The main parameters of interest in this work are friction conditions, drawbead configurations, sheet metal properties, and numerical errors. A robust design model is created to conduct a probabilistic design, which is made possible for this complex engineering process via an efficient uncertainty propagation technique. The method called the weighted three-point-based method estimates the statistical characteristics (mean and variance) of the responses of interest (margins of failures), and provide a systematic approach in designing a sheet metal forming process under the framework of design under uncertainty

Alabama ESI: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for wading birds, shorebirds, waterfowl, raptors, diving birds, seabirds, passerine birds, gulls, and terns...

Maryland ESI: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for wading birds, shorebirds, waterfowl, raptors, diving birds, seabirds, passerine birds, and gulls and...

Sustainable use of forest and hunting resources

OpenAIRE

Danilović Milorad; Gačić Dragan

2014-01-01

This paper presents the issue of the use of forest and hunting resources in Serbia, with special emphasis on their sustainability. The use of modern technological solutions in terms of sustainable use of forest and hunting resources should be seen through an analysis and evaluation of environmental impacts. The existing machinery used in Serbian forestry cannot respond to the current demands of forestry production. However, the current unfavourable conditio...

Big game hunting practices, meanings, motivations and constraints: a survey of Oregon big game hunters

Science.gov (United States)

Suresh K. Shrestha; Robert C. Burns

2012-01-01

We conducted a self-administered mail survey in September 2009 with randomly selected Oregon hunters who had purchased big game hunting licenses/tags for the 2008 hunting season. Survey questions explored hunting practices, the meanings of and motivations for big game hunting, the constraints to big game hunting participation, and the effects of age, years of hunting...

Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

Science.gov (United States)

Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

2015-01-01

Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

Game consumption and attitudes to hunting in the Netherlands ...

African Journals Online (AJOL)

Game consumption and attitudes to hunting in the Netherlands. ... share of this game. Anti-hunting activism is a potential threat for the supply of game and therefore, to this part of restaurant business. ... AJOL African Journals Online. HOW TO ...

Complementary benefits of tourism and hunting to communal conservancies in Namibia.

Science.gov (United States)

Naidoo, Robin; Weaver, L Chris; Diggle, Richard W; Matongo, Greenwell; Stuart-Hill, Greg; Thouless, Chris

2016-06-01

Tourism and hunting both generate substantial revenues for communities and private operators in Africa, but few studies have quantitatively examined the trade-offs and synergies that may result from these two activities. We evaluated financial and in-kind benefit streams from tourism and hunting on 77 communal conservancies in Namibia from 1998 to 2013, where community-based wildlife conservation has been promoted as a land-use that complements traditional subsistence agriculture. We used data collected annually for all communal conservancies to characterize whether benefits were derived from hunting or tourism. We classified these benefits into 3 broad classes and examined how benefits flowed to stakeholders within communities under the status quo and under a simulated ban on hunting. Across all conservancies, total benefits from hunting and tourism increased at roughly the same rate, although conservancies typically started generating benefits from hunting within 3 years of formation as opposed to after 6 years for tourism. Disaggregation of data revealed that the main benefits from hunting were income for conservancy management and food in the form of meat for the community at large. The majority of tourism benefits were salaried jobs at lodges. A simulated ban on trophy hunting significantly reduced the number of conservancies that could cover their operating costs, whereas eliminating income from tourism did not have as severe an effect. Given that the benefits generated from hunting and tourism typically begin at different times in a conservancy's life-span (earlier vs. later, respectively) and flow to different segments of local communities, these 2 activities together may provide the greatest incentives for conservation on communal lands in Namibia. A singular focus on either hunting or tourism would reduce the value of wildlife as a competitive land-use option and have grave repercussions for the viability of community-based conservation efforts in Namibia

Development and introduction of stamping technique for large-size laterals of NPP pipelines

International Nuclear Information System (INIS)

Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

1984-01-01

The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

Road networks predict human influence on Amazonian bird communities.

Science.gov (United States)

Ahmed, Sadia E; Lees, Alexander C; Moura, Nárgila G; Gardner, Toby A; Barlow, Jos; Ferreira, Joice; Ewers, Robert M

2014-11-22

Road building can lead to significant deleterious impacts on biodiversity, varying from direct road-kill mortality and direct habitat loss associated with road construction, to more subtle indirect impacts from edge effects and fragmentation. However, little work has been done to evaluate the specific effects of road networks and biodiversity loss beyond the more generalized effects of habitat loss. Here, we compared forest bird species richness and composition in the municipalities of Santarém and Belterra in Pará state, eastern Brazilian Amazon, with a road network metric called 'roadless volume (RV)' at the scale of small hydrological catchments (averaging 3721 ha). We found a significant positive relationship between RV and both forest bird richness and the average number of unique species (species represented by a single record) recorded at each site. Forest bird community composition was also significantly affected by RV. Moreover, there was no significant correlation between RV and forest cover, suggesting that road networks may impact biodiversity independently of changes in forest cover. However, variance partitioning analysis indicated that RV has partially independent and therefore additive effects, suggesting that RV and forest cover are best used in a complementary manner to investigate changes in biodiversity. Road impacts on avian species richness and composition independent of habitat loss may result from road-dependent habitat disturbance and fragmentation effects that are not captured by total percentage habitat cover, such as selective logging, fire, hunting, traffic disturbance, edge effects and road-induced fragmentation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Road networks predict human influence on Amazonian bird communities

Science.gov (United States)

Ahmed, Sadia E.; Lees, Alexander C.; Moura, Nárgila G.; Gardner, Toby A.; Barlow, Jos; Ferreira, Joice; Ewers, Robert M.

2014-01-01

Road building can lead to significant deleterious impacts on biodiversity, varying from direct road-kill mortality and direct habitat loss associated with road construction, to more subtle indirect impacts from edge effects and fragmentation. However, little work has been done to evaluate the specific effects of road networks and biodiversity loss beyond the more generalized effects of habitat loss. Here, we compared forest bird species richness and composition in the municipalities of Santarém and Belterra in Pará state, eastern Brazilian Amazon, with a road network metric called ‘roadless volume (RV)’ at the scale of small hydrological catchments (averaging 3721 ha). We found a significant positive relationship between RV and both forest bird richness and the average number of unique species (species represented by a single record) recorded at each site. Forest bird community composition was also significantly affected by RV. Moreover, there was no significant correlation between RV and forest cover, suggesting that road networks may impact biodiversity independently of changes in forest cover. However, variance partitioning analysis indicated that RV has partially independent and therefore additive effects, suggesting that RV and forest cover are best used in a complementary manner to investigate changes in biodiversity. Road impacts on avian species richness and composition independent of habitat loss may result from road-dependent habitat disturbance and fragmentation effects that are not captured by total percentage habitat cover, such as selective logging, fire, hunting, traffic disturbance, edge effects and road-induced fragmentation. PMID:25274363

Lionfish predators use flared fin displays to initiate cooperative hunting.

Science.gov (United States)

Lönnstedt, Oona M; Ferrari, Maud C O; Chivers, Douglas P

2014-06-01

Despite considerable study, mystery surrounds the use of signals that initiate cooperative hunting in animals. Using a labyrinth test chamber, we examined whether a lionfish, Dendrochirus zebra, would initiate cooperative hunts with piscine partners. We found that D. zebra uses a stereotyped flared fin display to alert conspecific and heterospecific lionfish species Pterois antennata to the presence of prey. Per capita success rate was significantly higher for cooperative hunters when compared with solitary ones, with hunt responders assisting hunt initiators in cornering the prey using their large extended pectoral fins. The initiators would most often take the first strike at the group of prey, but both hunters would then alternate striking at the remaining prey. Results suggest that the cooperative communication signal may be characteristic to the lionfish family, as interspecific hunters were equally coordinated and successful as intraspecific hunters. Our findings emphasize the complexity of collaborative foraging behaviours in lionfish; the turn-taking in strikes suggests that individuals do not solely try to maximize their own hunting success: instead they equally share the resources between themselves. Communicative group hunting has enabled Pteroine fish to function as highly efficient predators. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

A framework for development of an intelligent system for design and manufacturing of stamping dies

International Nuclear Information System (INIS)

Hussein, H M A; Kumar, S

2014-01-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

A framework for development of an intelligent system for design and manufacturing of stamping dies

Science.gov (United States)

Hussein, H. M. A.; Kumar, S.

2014-07-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

International Nuclear Information System (INIS)

Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

2013-01-01

The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

Participatory epidemiology at the neotropics: study of diseases of backyard livestock and description of hunting patterns in Uaxactún, Maya Reserve Biosphere, Guatemala.

Science.gov (United States)

Mérida Ruíz, Samuel Alberto; Guerra Centeno, Dennis Sigfried; Bailey Leonardo, Edgar Leonel; Rohn, Karl; Kösters, Sarah; Kreienbrock, Lothar

2016-04-07

The intention of the following study was to describe the interrelationship between villagers, domestic animals and wildlife at the Community Forestry Concession of Uaxactún, Guatemala by means of participatory epidemiological methods. The main focus was generating information regarding different livestock diseases considered important by villagers and their relevance, as well as obtaining knowledge concerning hunting activities and cooking methods to gain a better understanding of the interrelationship of people and animals and the diseases of their animals. For poultry, an overall prevalence of 41% of Newcastle disease was found by means of the ELISA test by antibody detection, chicken being the most affected species in the village. No samples were positive to avian influenza with the HI test. No virus was isolated by means of the tracheal or cloaca swabbing of ducks. All species could be hunted by chance at any time of the year. There was a difference in species hunted between seasons, peccaries being more frequently hunted during the dry season and in contrast, deer and wild avian during the rainy season. Villagers did not consume any raw meat. The cooking methods depended on the species. Stewing was the most favoured method for peccaries, wild birds, tepezcuintle and domestic poultry, whereas grilling was preferable for deer, roasting for armadillos and marinating for pork. According to the generated information, the most important domestic livestock species in the village are chickens and pigs, chickens being the most affected by diseases. No evident health problems on pigs were observed in this study. Hunting was shown as an activity enhanced by poverty and the lack of employment opportunities in the village and was mostly directed at larger species such as deer and peccaries. From the viewpoint of a transmission of zoonoses from animals to humans cooking methods mostly reflected a protective factor as no raw meat was eaten, stews and broths being the most

Hunting camp. River Murray

OpenAIRE

? Bayliss, Charles, 1850-1897, photographer

2003-01-01

200 x 149 mm. A good photograph showing a group of aborigines (in European clothes) with two hunting dogs, holding spears and standing in front of rough wooden cabins; with the river in the background. Photograph unknown, possible Charles Bayliss.

Hunting the mysterious Higgs

CERN Multimedia

Parker, Andy

1996-01-01

The Higgs boson is the most mysterious of all the fundamental particles. It accounts for how other particles acquired mass just after the beginning of the Universe. LEP-2 and the LHC at CERN will hunt it down between them

78 FR 78275 - Migratory Bird Hunting; Revision of Language for Approval of Nontoxic Shot for Use in Waterfowl...

Science.gov (United States)

2013-12-26

... on March 4, 2013 (78 FR 14060). We received eight comments or sets of comments on the proposed rule... all birds to determine any gross and/or microscopic pathological conditions. (x) Weigh all recovered...

Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

International Nuclear Information System (INIS)

Park, Jongho; Kim, Beomjoon

2016-01-01

Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

Treatment of Ramsay Hunt Syndrome

OpenAIRE

J Gordon Millichap

1997-01-01

The effect of acyclovir-prednisone treatment in 80 patients with Ramsay Hunt syndrome was analyzed retrospectively at the Department of Otolaryngology, Ehime University School of Medicine, Ehime, Japan.

design and development of a soap stamping and tableting machine

African Journals Online (AJOL)

2012-07-02

Jul 2, 2012 ... for these two operations. The manual ... chine, the cutting and stamping operations were done at different .... slack side belt tensions Tj were determined as 131.66N and 162.71N for the .... vironmental Management, Vol. 6, No.

"Bird Song Metronomics": Isochronous Organization of Zebra Finch Song Rhythm.

Science.gov (United States)

Norton, Philipp; Scharff, Constance

2016-01-01

The human capacity for speech and vocal music depends on vocal imitation. Songbirds, in contrast to non-human primates, share this vocal production learning with humans. The process through which birds and humans learn many of their vocalizations as well as the underlying neural system exhibit a number of striking parallels and have been widely researched. In contrast, rhythm, a key feature of language, and music, has received surprisingly little attention in songbirds. Investigating temporal periodicity in bird song has the potential to inform the relationship between neural mechanisms and behavioral output and can also provide insight into the biology and evolution of musicality. Here we present a method to analyze birdsong for an underlying rhythmic regularity. Using the intervals from one note onset to the next as input, we found for each bird an isochronous sequence of time stamps, a "signal-derived pulse," or pulse(S), of which a subset aligned with all note onsets of the bird's song. Fourier analysis corroborated these results. To determine whether this finding was just a byproduct of the duration of notes and intervals typical for zebra finches but not dependent on the individual duration of elements and the sequence in which they are sung, we compared natural songs to models of artificial songs. Note onsets of natural song deviated from the pulse(S) significantly less than those of artificial songs with randomized note and gap durations. Thus, male zebra finch song has the regularity required for a listener to extract a perceived pulse (pulse(P)), as yet untested. Strikingly, in our study, pulses(S) that best fit note onsets often also coincided with the transitions between sub-note elements within complex notes, corresponding to neuromuscular gestures. Gesture durations often equaled one or more pulse(S) periods. This suggests that gesture duration constitutes the basic element of the temporal hierarchy of zebra finch song rhythm, an interesting parallel

Application of the anthropogenic allee effect model to trophy hunting as a conservation tool.

Science.gov (United States)

Harris, Richard B; Cooney, Rosie; Leader-Williams, Nigel

2013-10-01

Trophy hunting can provide economic incentives to conserve wild species, but it can also involve risk when rare species are hunted. The anthropogenic Allee effect (AAE) is a conceptual model that seeks to explain how rarity may spread the seeds of further endangerment. The AAE model has increasingly been invoked in the context of trophy hunting, increasing concerns that such hunting may undermine rather than enhance conservation efforts. We question the appropriateness of uncritically applying the AAE model to trophy hunting for 4 reasons. First, the AAE assumes an open-access resource, which is a poor characterization of most trophy-hunting programs and obscures the potential for state, communal, or private-property use rights to generate positive incentives for conservation. Second, study results that show the price of hunting increases as the rarity of the animal increases are insufficient to indicate the presence of AAE. Third, AAE ignores the existence of biological and behavioral factors operating in most trophy-hunting contexts that tend to regulate the effect of hunting. We argue that site-specific data, rather than aggregated hunting statistics, are required to demonstrate that patterns of unsustainable exploitation can be well explained by an AAE model. Instead, we suggest that conservation managers seeking to investigate and identify constraints that limit the potential conservation role of trophy hunting, should focus on the critical governance characteristics that shape the potential conservation role of trophy hunting, such as corruption, insecure property rights, and inadequate sharing of benefits with local people. © 2013 Society for Conservation Biology.

Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

Science.gov (United States)

National Women's History Project, Windsor, CA.

This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

Draw-in Map - A Road Map for Simulation-Guided Die Tryout and Stamping Process Control

International Nuclear Information System (INIS)

Wang Chuantao; Zhang, Jimmy J.; Goan, Norman

2005-01-01

Sheet metal forming is a displacement or draw-in controlled manufacturing process in which a flat blank is drawn into die cavity to form an automotive body panel. Draw-in amount is the single most important stamping manufacturing index that controls all forming characteristics (strains, stresses, thinning, etc.), stamping failures (splits, wrinkles, surface distortion, etc.) and line die operations and automations. Draw-in Map is engineered for math-based die developments via advanced stamping simulation technology. Then the Draw-in Map is provided to die makers in plants as a road map for math-guided die tryout in which the die tryout workers follow the engineered tryout conditions and matches the engineered draw-in amount so that the tryout time and cost are greatly reduced, and quality is ensured. The Map can also be used as a math-based trouble-shooting tool to identify the causes of formability problems in stamping production. The engineered Draw-in Map has been applied to all draw die tryout for all GM vehicle programs since 1998. A minimum 50% reduction in both lead-time and cost and significant improvement in panel quality in tryout have been reported. This paper presents the concept and process to apply the engineered Draw-in Map in die tryout

Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates

Energy Technology Data Exchange (ETDEWEB)

Dundar, F. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); Department of Materials Science and Engineering, Gebze Institute of Technology (Turkey); Dur, Ender; Koc, M. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); Mahabunphachai, S. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); National Metal and Materials Technology Center (MTEC), Pathumthani (Thailand)

2010-06-01

Metallic bipolar plates have several advantages over bipolar plates made from graphite and composites due to their high conductivity, low material and production costs. Moreover, thin bipolar plates are possible with metallic alloys, and hence low fuel cell stack volume and mass are. Among existing fabrication methods for metallic bipolar plates, stamping and hydroforming are seen as prominent approaches for mass production scales. In this study, the effects of important process parameters of these manufacturing processes on the corrosion resistance of metallic bipolar plates made of SS304 were investigated. Specifically, the effects of punch speed, pressure rate, stamping force and hydroforming pressure were studied as they were considered to inevitably affect the bipolar plate micro-channel dimensions, surface topography, and hence the corrosion resistance. Corrosion resistance under real fuel cell conditions was examined using both potentiodynamic and potentiostatic experiments. The majority of the results exhibited a reduction in the corrosion resistance for both stamped and hydroformed plates when compared with non-deformed blank plates of SS304. In addition, it was observed that there exist an optimal process window for punch speed in stamping and the pressure rate in hydroforming to achieve improved corrosion resistance at a faster production rate. (author)

50 CFR 32.46 - Nebraska.

Science.gov (United States)

2010-10-01

... Hunting. [Reserved] C. Big Game Hunting. We allow hunting of white-tailed deer in accordance with State.... Otherwise hunters must remove them from the refuge and properly dispose of them. C. Big Game Hunting. We.... Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting. [Reserved] D...

50 CFR 32.54 - Ohio.

Science.gov (United States)

2010-10-01

... Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting. [Reserved] D.... [Reserved] C. Big Game Hunting. We allow hunting of white-tailed deer on designated areas of the refuge in... WILDLIFE REFUGE SYSTEM HUNTING AND FISHING Refuge-Specific Regulations for Hunting and Fishing § 32.54 Ohio...

American Society of Mechanical Engineers' N stamp requirements

International Nuclear Information System (INIS)

Row, P.D.

1977-01-01

Incorporated with ASME Section III, Nuclear Power Plant Components, is an Appendix on Quality Assurance Systems which includes provision for ASME surveys. Manufacturers and installers passing the survey successfully receive an N Symbol Stamp and an ASME Certificate of Authorization. An outline is given of the prerequisites for a survey to be scheduled and of the requirements and procedures adopted by the survey team. (U.K.)

Hunting for Knowledge: Using a Scavenger Hunt to Orient Graduate Veterinary Students

Science.gov (United States)

Pike, Caitlin; Alpi, Kristine M.

2015-01-01

Active participation in orientation is hoped to increase understanding and use of library resources and services beyond the effect of tours or welcome lectures. Timed scavenger hunts have been used to orient undergraduate and medical students to academic libraries. This report describes the planning, execution, and evaluation of an untimed…

Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

Science.gov (United States)

Lin, Wenhu; Li, Fang; Wu, Dongsheng; Chen, Xiaoguan; Hua, Xueming; Pan, Hua

2018-03-01

22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

CERN Multimedia

Patrice Loiez

2004-01-01

'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

Semi-Commercial and Traditional Hunting of Baar Tribe in Riung, Flores, East Nusa Tenggara

Directory of Open Access Journals (Sweden)

Kayat Kayat

2017-01-01

Hunting is one of the aspects that influence number of wild animals. The article aims at describing semi-comercial and traditional hunting concept of Baar Tribe in East Nusa Tenggara as an alternative for wild animal conservation.  The data collection methods are guided interview, in-depth interview and participant observation. The findings show that in the semi-comercial and traditional hunting concept of Baar Tribe in East Nusa Tenggara, traditional wisdom is represented by hunting techniques and equipments. It is likely that rapid semi-commercial hunting conducted by certain members of Baar tribe causes sharp decline in the population of wild animals. On the other hand, annual traditional hunting which strictly follows traditional code of conduct can maintain Timor deer population in Timor. Keywords: hunting, population, semi-commercial, traditional, Timor deer

Columbia River ESI: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for wading birds, shorebirds, waterfowl, diving birds, seabirds, passerine birds, gulls, and terns in...

Characterization of the interfacial heat transfer coefficient for hot stamping processes

Science.gov (United States)

Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

2016-08-01

In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

Hunted woolly monkeys (Lagothrix poeppigii show threat-sensitive responses to human presence.

Directory of Open Access Journals (Sweden)

Sarah Papworth

Full Text Available Responding only to individuals of a predator species which display threatening behaviour allows prey species to minimise energy expenditure and other costs of predator avoidance, such as disruption of feeding. The threat sensitivity hypothesis predicts such behaviour in prey species. If hunted animals are unable to distinguish dangerous humans from non-dangerous humans, human hunting is likely to have a greater effect on prey populations as all human encounters should lead to predator avoidance, increasing stress and creating opportunity costs for exploited populations. We test the threat sensitivity hypothesis in wild Poeppigi's woolly monkeys (Lagothrix poeppigii in Yasuní National Park, Ecuador, by presenting human models engaging in one of three behaviours "hunting", "gathering" or "researching". These experiments were conducted at two sites with differing hunting pressures. Visibility, movement and vocalisations were recorded and results from two sites showed that groups changed their behaviours after being exposed to humans, and did so in different ways depending on the behaviour of the human model. Results at the site with higher hunting pressure were consistent with predictions based on the threat sensitivity hypothesis. Although results at the site with lower hunting pressure were not consistent with the results at the site with higher hunting pressure, groups at this site also showed differential responses to different human behaviours. These results provide evidence of threat-sensitive predator avoidance in hunted primates, which may allow them to conserve both time and energy when encountering humans which pose no threat.

50 CFR 32.41 - Michigan.

Science.gov (United States)

2010-10-01

.... Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting. Hunting of... to State regulation. B. Upland Game Hunting. Hunting is pursuant to State regulation. C. Big Game... season. 2. We only allow hunting of snowshoe hare on Unit A from December 1 through March 31. C. Big Game...

26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

Science.gov (United States)

2010-04-01

..., transfers, takes or gives in exchange, or pledges or gives in pledge, except as authorized in the Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

Directory of Open Access Journals (Sweden)

M. Kumar

2017-01-01

Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

Risk and ethical concerns of hunting male elephant: behavioural and physiological assays of the remaining elephants.

Directory of Open Access Journals (Sweden)

Tarryne Burke

Full Text Available BACKGROUND: Hunting of male African elephants may pose ethical and risk concerns, particularly given their status as a charismatic species of high touristic value, yet which are capable of both killing people and damaging infrastructure. METHODOLOGY/PRINCIPAL FINDINGS: We quantified the effect of hunts of male elephants on (1 risk of attack or damage (11 hunts, and (2 behavioural (movement dynamics and physiological (stress hormone metabolite concentrations responses (4 hunts in Pilanesberg National Park. For eleven hunts, there were no subsequent attacks on people or infrastructure, and elephants did not break out of the fenced reserve. For three focal hunts, there was an initial flight response by bulls present at the hunting site, but their movements stabilised the day after the hunt event. Animals not present at the hunt (both bulls and herds did not show movement responses. Physiologically, hunting elephant bulls increased faecal stress hormone levels (corticosterone metabolites in both those bulls that were present at the hunts (for up to four days post-hunt and in the broader bull and breeding herd population (for up to one month post-hunt. CONCLUSIONS/SIGNIFICANCE: As all responses were relatively minor, hunting male elephants is ethically acceptable when considering effects on the remaining elephant population; however bulls should be hunted when alone. Hunting is feasible in relatively small enclosed reserves without major risk of attack, damage, or breakout. Physiological stress assays were more effective than behavioural responses in detecting effects of human intervention. Similar studies should evaluate intervention consequences, inform and improve best practice, and should be widely applied by management agencies.

Toward a new understanding of the links between poverty and illegal wildlife hunting.

Science.gov (United States)

Duffy, Rosaleen; St John, Freya A V; Büscher, Bram; Brockington, Dan

2016-02-01

Conservation organizations have increasingly raised concerns about escalating rates of illegal hunting and trade in wildlife. Previous studies have concluded that people hunt illegally because they are financially poor or lack alternative livelihood strategies. However, there has been little attempt to develop a richer understanding of the motivations behind contemporary illegal wildlife hunting. As a first step, we reviewed the academic and policy literatures on poaching and illegal wildlife use and considered the meanings of poverty and the relative importance of structure and individual agency. We placed motivations for illegal wildlife hunting within the context of the complex history of how wildlife laws were initially designed and enforced to indicate how hunting practices by specific communities were criminalized. We also considered the nature of poverty and the reasons for economic deprivation in particular communities to indicate how particular understandings of poverty as material deprivation ultimately shape approaches to illegal wildlife hunting. We found there is a need for a much better understanding of what poverty is and what motivates people to hunt illegally. © 2015 Society for Conservation Biology.

The thrill of the chase: uncovering illegal sport hunting in Brazil through YouTube™ posts

Directory of Open Access Journals (Sweden)

Hani R. El Bizri

2015-09-01

Full Text Available The impacts of unregulated sport hunting can severely affect populations of target game species. Because hunting in Brazil is limited by law, obtaining data on illegal sport hunting in this country is challenging. We used an unusual online resource, YouTube™, to detect the occurrence of sport hunting in Brazil, measure the impacts of the activity on the main Brazilian game species and biomes, evaluate the opinions of hunters and internet users on sport hunting, and discuss the need for policy interventions in wildlife conservation in this country. We found 383 videos related to Brazilian sport hunting on YouTube™, accounting for more than 15 million views. Most videos were produced in the Cerrado (Brazilian savannah and approximately 70% of them depicted events of pursuit and killing of wild animals, especially lowland pacas (Cuniculus paca and armadillos (Family Dasypodidae. Videos were posted primarily in July and December, coinciding with the two main Brazilian vacation periods. Furthermore, the shotguns identified on videos show that sport hunters expend large sums of money to undertake their hunts. These results indicate that Brazilian sport hunters are possibly wealthier urban residents who travel to rural areas to hunt, contrasting with previous hunting studies in the country. Most viewers declared themselves in favor of sport hunting in comments (n = 2893 and ratings (n = 36,570 of the videos. Discussions generated by comments suggest that Brazilian sport hunters employ several informal management strategies to maintain game species stocks for future hunting and intensely question the restrictions of Brazilian environmental policies. Our results demonstrate that solutions are needed for the regulation of sport hunting in Brazil. Government actions, whether to increase surveillance or legalize hunting programs, should take into account the opinions of sport hunters and their perceptions on hunting dynamics to support effective policy

A Geospatial Scavenger Hunt

Science.gov (United States)

Martinez, Adriana E.; Williams, Nikki A.; Metoyer, Sandra K.; Morris, Jennifer N.; Berhane, Stephen A.

2009-01-01

With the use of technology such as Global Positioning System (GPS) units and Google Earth for a simple-machine scavenger hunt, you will transform a standard identification activity into an exciting learning experience that motivates students, incorporates practical skills in technology, and enhances students' spatial-thinking skills. In the…

Neanderthal use of fish, mammals, birds, starchy plants and wood 125-250,000 years ago.

Directory of Open Access Journals (Sweden)

Bruce L Hardy

Full Text Available Neanderthals are most often portrayed as big game hunters who derived the vast majority of their diet from large terrestrial herbivores while birds, fish and plants are seen as relatively unimportant or beyond the capabilities of Neanderthals. Although evidence for exploitation of other resources (small mammals, birds, fish, shellfish, and plants has been found at certain Neanderthal sites, these are typically dismissed as unusual exceptions. The general view suggests that Neanderthal diet may broaden with time, but that this only occurs sometime after 50,000 years ago. We present evidence, in the form of lithic residue and use-wear analyses, for an example of a broad-based subsistence for Neanderthals at the site of Payre, Ardèche, France (beginning of MIS 5/end of MIS 6 to beginning of MIS 7/end of MIS 8; approximately 125-250,000 years ago. In addition to large terrestrial herbivores, Neanderthals at Payre also exploited starchy plants, birds, and fish. These results demonstrate a varied subsistence already in place with early Neanderthals and suggest that our ideas of Neanderthal subsistence are biased by our dependence on the zooarchaeological record and a deep-seated intellectual emphasis on big game hunting.

78 FR 14060 - Migratory Bird Hunting; Revision of Language for Approval of Nontoxic Shot for Use in Waterfowl...

Science.gov (United States)

2013-03-04

... birds to determine any pathological conditions. (3) Test analyses. (i) Analyze mortality among the... at a location where the mean monthly low temperature during December through March is between 20 and... determine any pathological conditions associated with their deaths. (C) Test analyses. (1) Analyze mortality...

Nanostructured submicron block copolymer dots by sacrificial stamping: a potential preconcentration platform for locally resolved sensing, chemistry and cellular interactions

OpenAIRE

Hou, Peilong; Han, Weijia; Philippi, Michael; Schäfer, Helmut; Steinhart, Martin

2018-01-01

Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the block copolymer polystyrene-block-poly(2-pyridine) (PS-b-P2VP), we deposited arrays of nanostructured submicron PS-b-P2VP dots with heights of about 100 nm onto silicon wafers and glass slides. The sacrificial PS-b-P2VP stamps were topographically patterned w...

Size Effect Studies on Tensile Tests for Hot Stamping Steel

Science.gov (United States)

Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

2018-02-01

Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

Experimental Validation for Hot Stamping Process by Using Taguchi Method

Science.gov (United States)

Fawzi Zamri, Mohd; Lim, Syh Kai; Razlan Yusoff, Ahmad

2016-02-01

Due to the demand for reduction in gas emissions, energy saving and producing safer vehicles has driven the development of Ultra High Strength Steel (UHSS) material. To strengthen UHSS material such as boron steel, it needed to undergo a process of hot stamping for heating at certain temperature and time. In this paper, Taguchi method is applied to determine the appropriate parameter of thickness, heating temperature and heating time to achieve optimum strength of boron steel. The experiment is conducted by using flat square shape of hot stamping tool with tensile dog bone as a blank product. Then, the value of tensile strength and hardness is measured as response. The results showed that the lower thickness, higher heating temperature and heating time give the higher strength and hardness for the final product. In conclusion, boron steel blank are able to achieve up to 1200 MPa tensile strength and 650 HV of hardness.

Hunting and hallucinogens: The use psychoactive and other plants to improve the hunting ability of dogs.

Science.gov (United States)

Bennett, Bradley C; Alarcón, Rocío

2015-08-02

Cultures throughout the world give plants to their dogs in order to improve hunting success. These practices are best developed in lowland Ecuador and Peru. There is no experimental evidence for the efficacy of these practices nor critical reviews that consider possible pharmacological effects on dogs based on the chemistry of the ethnoverterinary plants. This review has three specific aims: (1) determine what plants the Ecuadorian Shuar and Quichua give to dogs to improve their hunting abilities, (2) determine what plants other cultures give to dogs for the same purpose, and (3) assess the possible pharmacological basis for the use of these plants, particularly the psychoactive ones. We gathered Shuar (Province of Morona-Santiago) and Quichua (Napo and Orellano Provinces) data from our previous publications and field notes. All specimens were vouchered and deposited in QCNE with duplicates sent to NY and MO. Data presented from other cultures derived from published studies on ethnoveterinary medicine. Species names were updated, when necessary, and family assignments follow APG III (Angiosperm Phylogeny Group, 2009. An update of the Angiosperm Phylogeny Group classification for the orders and families of flowering plants: APG III. Bot. J. Linn. Soc. 161, 105-121). Chemical data were found using PubMed and SciFinder. The Shuar and Quichua of Ecuador use at least 22 species for ethnoveterinary purposes, including all but one of their principal hallucinogens. Literature surveys identified 43 species used in other cultures to improve hunting ability. No published studies have examined the pharmacological active of these plant species in dogs. We, thus, combined phytochemical data with the ethnobotanical reports of each plant and then classified each species into a likely pharmacological category: depuratives/deodorant, olfactory sensitizer, ophthalmic, or psychoactive. The use of psychoactive substances to improve a dog׳s hunting ability seems counterintuitive, yet

Deer hunting and television: are tv shows creating expectations among deer hunters?

Science.gov (United States)

Joshua D. Agee; Craig A. Miller

2009-01-01

Throughout the past two decades new media outlets emphasizing trophy deer hunting have come to dominate hunting culture. Using data collected through a mail survey of Illinois deer hunters (n = 2,683, 78.5-percent response), we tested two hypotheses to determine factors that contribute to preference for hunting trophy deer. In particular, we examined the relationship...

Differences between Pygmy and Non-Pygmy Hunting in Congo Basin Forests.

Directory of Open Access Journals (Sweden)

John E Fa

Full Text Available We use data on game harvest from 60 Pygmy and non-Pygmy settlements in the Congo Basin forests to examine whether hunting patterns and prey profiles differ between the two hunter groups. For each group, we calculate hunted animal numbers and biomass available per inhabitant, P, per year (harvest rates and killed per hunter, H, per year (extraction rates. We assess the impact of hunting of both hunter groups from estimates of numbers and biomass of prey species killed per square kilometre, and by examining the proportion of hunted taxa of low, medium and high population growth rates as a measure of their vulnerability to overhunting. We then map harvested biomass (kg-1P-1Yr-1 of bushmeat by Pygmies and non-Pygmies throughout the Congo Basin. Hunting patterns differ between Pygmies and non-Pygmies; Pygmies take larger and different prey and non-Pygmies sell more for profit. We show that non-Pygmies have a potentially more severe impact on prey populations than Pygmies. This is because non-Pygmies hunt a wider range of species, and twice as many animals are taken per square kilometre. Moreover, in non-Pygmy settlements there was a larger proportion of game taken of low population growth rate. Our harvest map shows that the non-Pygmy population may be responsible for 27 times more animals harvested than the Pygmy population. Such differences indicate that the intense competition that may arise from the more widespread commercial hunting by non-Pygmies is a far more important constraint and source of conflict than are protected areas.

Sport hunting, predator control and conservation of large carnivores.

Directory of Open Access Journals (Sweden)

Craig Packer

Full Text Available Sport hunting has provided important economic incentives for conserving large predators since the early 1970's, but wildlife managers also face substantial pressure to reduce depredation. Sport hunting is an inherently risky strategy for controlling predators as carnivore populations are difficult to monitor and some species show a propensity for infanticide that is exacerbated by removing adult males. Simulation models predict population declines from even moderate levels of hunting in infanticidal species, and harvest data suggest that African countries and U.S. states with the highest intensity of sport hunting have shown the steepest population declines in African lions and cougars over the past 25 yrs. Similar effects in African leopards may have been masked by mesopredator release owing to declines in sympatric lion populations, whereas there is no evidence of overhunting in non-infanticidal populations of American black bears. Effective conservation of these animals will require new harvest strategies and improved monitoring to counter demands for predator control by livestock producers and local communities.

Morgan, Prof. Thomas Hunt

Indian Academy of Sciences (India)

Home; Fellowship. Fellow Profile. Elected: 1939 Honorary. Morgan, Prof. Thomas Hunt Nobel Laureate (Medicine) - 1933. Date of birth: 25 September 1866. Date of death: 4 December 1945. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th ...

“Bird Song Metronomics”: Isochronous Organization of Zebra Finch Song Rhythm

Science.gov (United States)

Norton, Philipp; Scharff, Constance

2016-01-01

The human capacity for speech and vocal music depends on vocal imitation. Songbirds, in contrast to non-human primates, share this vocal production learning with humans. The process through which birds and humans learn many of their vocalizations as well as the underlying neural system exhibit a number of striking parallels and have been widely researched. In contrast, rhythm, a key feature of language, and music, has received surprisingly little attention in songbirds. Investigating temporal periodicity in bird song has the potential to inform the relationship between neural mechanisms and behavioral output and can also provide insight into the biology and evolution of musicality. Here we present a method to analyze birdsong for an underlying rhythmic regularity. Using the intervals from one note onset to the next as input, we found for each bird an isochronous sequence of time stamps, a “signal-derived pulse,” or pulseS, of which a subset aligned with all note onsets of the bird's song. Fourier analysis corroborated these results. To determine whether this finding was just a byproduct of the duration of notes and intervals typical for zebra finches but not dependent on the individual duration of elements and the sequence in which they are sung, we compared natural songs to models of artificial songs. Note onsets of natural song deviated from the pulseS significantly less than those of artificial songs with randomized note and gap durations. Thus, male zebra finch song has the regularity required for a listener to extract a perceived pulse (pulseP), as yet untested. Strikingly, in our study, pulsesS that best fit note onsets often also coincided with the transitions between sub-note elements within complex notes, corresponding to neuromuscular gestures. Gesture durations often equaled one or more pulseS periods. This suggests that gesture duration constitutes the basic element of the temporal hierarchy of zebra finch song rhythm, an interesting parallel to the

Stamping, Clapping and Chanting: An Ancient Learning Pathway?

Directory of Open Access Journals (Sweden)

Marion M. Long

2006-04-01

Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

Prediction of Proper Temperatures for the Hot Stamping Process Based on the Kinetics Models

Science.gov (United States)

Samadian, P.; Parsa, M. H.; Mirzadeh, H.

2015-02-01

Nowadays, the application of kinetics models for predicting microstructures of steels subjected to thermo-mechanical treatments has increased to minimize direct experimentation, which is costly and time consuming. In the current work, the final microstructures of AISI 4140 steel sheets after the hot stamping process were predicted using the Kirkaldy and Li kinetics models combined with new thermodynamically based models in order for the determination of the appropriate process temperatures. In this way, the effect of deformation during hot stamping on the Ae3, Acm, and Ae1 temperatures was considered, and then the equilibrium volume fractions of phases at different temperatures were calculated. Moreover, the ferrite transformation rate equations of the Kirkaldy and Li models were modified by a term proposed by Åkerström to consider the influence of plastic deformation. Results showed that the modified Kirkaldy model is satisfactory for the determination of appropriate austenitization temperatures for the hot stamping process of AISI 4140 steel sheets because of agreeable microstructure predictions in comparison with the experimental observations.

Time stamp technique using a nuclear emulsion multi-stage shifter for gamma-ray telescope

International Nuclear Information System (INIS)

Takahashi, Satoru; Aoki, Shigeki; Rokujo, Hiroki; Hamada, Kaname; Komatsu, Masahiro; Morishima, Kunihiro; Nakamura, Mitsuhiro; Nakano, Toshiyuki; Niwa, Kimio; Sato, Osamu; Yoshioka, Teppei; Kodama, Koichi

2010-01-01

Nuclear emulsion has a potential use as a gamma-ray telescope with high angular resolution. For this application it is necessary to know the time when each track was recorded in the emulsion. In previous experiments using nuclear emulsion, various efforts were used to associate time to nuclear emulsion tracks and to improve the time resolution. Using a high speed readout system for nuclear emulsion together with a clock-based multi-stage emulsion shifter, we invented a technique to give a time-stamp to emulsion tracks and greatly improve the time resolution. A test experiment with a 2-stage shifter was used to demonstrate the principle of multi-stage shifting, and we achieved a time resolution 1.5 s for 12.1 h (about 1 part in 29 000) with the time stamp reliability 97% and the time stamp efficiency 98%. This multi-stage shifter can achieve the time resolution required for a gamma-ray telescope and can also be applied to another cosmic ray observations and accelerator experiments using nuclear emulsion.

A 9,000-year-old caribou hunting structure beneath Lake Huron.

Science.gov (United States)

O'Shea, John M; Lemke, Ashley K; Sonnenburg, Elizabeth P; Reynolds, Robert G; Abbott, Brian D

2014-05-13

Some of the most pivotal questions in human history necessitate the investigation of archaeological sites that are now under water. Nine thousand years ago, the Alpena-Amberley Ridge (AAR) beneath modern Lake Huron was a dry land corridor that connected northeast Michigan to southern Ontario. The newly discovered Drop 45 Drive Lane is the most complex hunting structure found to date beneath the Great Lakes. The site and its associated artifacts provide unprecedented insight into the social and seasonal organization of prehistoric caribou hunting. When combined with environmental and simulation studies, it is suggested that distinctly different seasonal strategies were used by early hunters on the AAR, with autumn hunting being carried out by small groups, and spring hunts being conducted by larger groups of cooperating hunters.

Analyses of four centuries of bounty hunting on seals in Zeeland, SW-Netherlands

OpenAIRE

Vooys, de, C.G.N.; Brasseur, S.M.J.M.; Meer, van der, J.; Reijnders, P.J.H.

2012-01-01

For centuries, bounty hunts for seals (Phoca vitulina) were conducted in the Province of Zeeland (SWNetherlands).Records of bounties paid for seals hunted in that area have been archived by the province of Zeelandfrom the 16th until the 20th century. These hunting records were used to reconstruct the numbers of seals caughteach year in order to subsequently investigate the effect of social and historical events on the hunt. Based on thetype of records we discerned three periods in the bounty ...

50 CFR 32.47 - Nevada.

Science.gov (United States)

2010-10-01

... conditions: 1. Conditions A3 and A4 apply. 2. We only allow hunting on designated days. C. Big Game Hunting. [Reserved] D. Sport Fishing. [Reserved] Desert National Wildlife Refuge A. Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game Hunting. Hunting of bighorn sheep is permitted on...

Thresher sharks use tail-slaps as a hunting strategy.

Science.gov (United States)

Oliver, Simon P; Turner, John R; Gann, Klemens; Silvosa, Medel; D'Urban Jackson, Tim

2013-01-01

The hunting strategies of pelagic thresher sharks (Alopias pelagicus) were investigated at Pescador Island in the Philippines. It has long been suspected that thresher sharks hunt with their scythe-like tails but the kinematics associated with the behaviour in the wild are poorly understood. From 61 observations recorded by handheld underwater video camera between June and October 2010, 25 thresher shark shunting events were analysed. Thresher sharks employed tail-slaps to debilitate sardines at all times of day. Hunting events comprised preparation, strike, wind-down recovery and prey item collection phases, which occurred sequentially. Preparation phases were significantly longer than the others, presumably to enable a shark to windup a tail-slap. Tail-slaps were initiated by an adduction of the pectoral fins, a manoeuvre that changed a thresher shark's pitch promoting its posterior region to lift rapidly, and stall its approach. Tail-slaps occurred with such force that they may have caused dissolved gas to diffuse out of the water column forming bubbles. Thresher sharks were able to consume more than one sardine at a time, suggesting that tail-slapping is an effective foraging strategy for hunting schooling prey. Pelagic thresher sharks appear to pursue sardines opportunistically by day and night, which may make them vulnerable to fisheries. Alopiids possess specialist pectoral and caudal fins that are likely to have evolved, at least in part, for tail-slapping. The evidence is now clear; thresher sharks really do hunt with their tails.

Conservation status and recovery strategies for endemic Hawaiian birds

Science.gov (United States)

Banko, Paul C.; David, Reginald E.; Jacobi, James D.; Banko, Winston E.

2001-01-01

of birds initially increase slowly even when habitat conditions are favorable. Consequently, even as habitat conditions begin to improve, small populations may disappear unless they are supplemented directly. Hawaiian bird conservation is also affected by social and legal factors, including hunting alien game species, commercial land use practices, and lawsuits and policies concerning endangered species and critical habitat. Influenced by this mixture of conflicting and competing issues, Hawaiian bird recovery programs range from management of single species and some components of their habitats to limited forms of community or ecosystem management. Although the effectiveness of most programs is difficult to evaluate because of monitoring limitations, several programs exemplify species and community management. Programs primarily intended to recover single species include Hawaiian Goose or Nene (Branta sandvicensis), Hawaiian Crow or ‘Alala (Corvus hawaiiensis), and Palila (Loxioides bailleui). Programs attempting to manage entire communities of forest birds include Hakalau Forest National Wildlife Refuge and Hawai‘i Volcanoes National Park on Hawai‘i, and Waikamoi Preserve, Hanawi Natural Area Reserve, and Haleakala National Park on Maui.

Ethnozoological Study of Native Birds and Mammals Associated to Fruit Orchards of Zacualpan de Amilpas, Morelos, México

Directory of Open Access Journals (Sweden)

Alejandro García-Flores

2017-06-01

Full Text Available This research is an ethnozoologic study based on the analysis of the traditional knowledge that the autochthonous inhabitants of the community of Zacualpan de Amilpas, Morelos, Mexico, have in what refers to the native birds and mammals associated with groves. The methodology was applied in four stages: contact with the pertinent authorities, identification of key informants, grove survey, interviewing and sampling to observe and corroborate the species identified by the informants. Thus, 34 bird common names pertaining to 26 species, 6 orders and 15 families were registered. Passeriformes was the order with the highest species number, and Tyrannidae and Icteridae were the most representative families. For mammals, 16 common names were recognized pertaining to 18 species, 6 orders and 10 families; the order Carnivora and the family Mephitidae had the largest species number. The use values registered were: alimentary, medicinal, ornamental and as good-luck charms. Species are hunted using shotguns and slingshots. Community members recognize three environmental services (seed dispersion, insect predation and pollination that 16 species carry out. We conclude that the reassessment of local traditional knowledge is important for the use, management and conservation of birds and mammals associated with traditional groves.

The Relationships between Morphological Characteristics and Foraging Behavior in Four Selected Species of Shorebirds and Water Birds Utilizing Tropical Mudflats

Directory of Open Access Journals (Sweden)

Nor Atiqah Norazlimi

2015-01-01

Full Text Available A study was conducted to investigate the relationship between the physical morphology of shorebirds and water birds (i.e., Lesser adjutant (Leptoptilos javanicus, Common redshank (Tringa totanus, Whimbrel (Numenius phaeopus, and Little heron (Butorides striata and their foraging behavior in the mudflats area of Selangor, Peninsular Malaysia, from August 2013 to July 2014 by using direct observation techniques (using binoculars and a video recorder. The actively foraging bird species were watched, and their foraging activities were recorded for at least 30 seconds for up to a maximum of five minutes. A Spearman Rank Correlation highlighted a significant relationship between bill size and foraging time (R=0.443, p<0.05, bill size and prey size (R=-0.052, p<0.05, bill size and probing depth (R=0.42, p=0.003, and leg length and water/mud depth (R=0.706, p<0.005. A Kruskal-Wallis Analysis showed a significant difference between average estimates of real probing depth of the birds (mm and species (H=15.96, p=0.0012. Three foraging techniques were recorded: pause-travel, visual-feeding, and tactile-hunting. Thus, morphological characteristics of bird do influence their foraging behavior and strategies used when foraging.

Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

International Nuclear Information System (INIS)

Zhang Fengxiang; Low, Hong Yee

2008-01-01

Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

Analyses of four centuries of bounty hunting on seals in Zeeland, SW-Netherlands

NARCIS (Netherlands)

de Vooijs, K.G.N.; Brasseur, S.M.J.M.; van der Meer, J.; Reijnders, P.J.H.

2012-01-01

For centuries, bounty hunts for seals (Phoca vitulina) were conducted in the Province of Zeeland (SWNetherlands).Records of bounties paid for seals hunted in that area have been archived by the province of Zeelandfrom the 16th until the 20th century. These hunting records were used to reconstruct

Stochastic analysis and robust optimization for a deck lid inner panel stamping

International Nuclear Information System (INIS)

Hou, Bo; Wang, Wurong; Li, Shuhui; Lin, Zhongqin; Xia, Z. Cedric

2010-01-01

FE-simulation and optimization are widely used in the stamping process to improve design quality and shorten development cycle. However, the current simulation and optimization may lead to non-robust results due to not considering the variation of material and process parameters. In this study, a novel stochastic analysis and robust optimization approach is proposed to improve the stamping robustness, where the uncertainties are involved to reflect manufacturing reality. A meta-model based stochastic analysis method is developed, where FE-simulation, uniform design and response surface methodology (RSM) are used to construct meta-model, based on which Monte-Carlo simulation is performed to predict the influence of input parameters variation on the final product quality. By applying the stochastic analysis, uniform design and RSM, the mean and the standard deviation (SD) of product quality are calculated as functions of the controllable process parameters. The robust optimization model composed of mean and SD is constructed and solved, the result of which is compared with the deterministic one to show its advantages. It is demonstrated that the product quality variations are reduced significantly, and quality targets (reject rate) are achieved under the robust optimal solution. The developed approach offers rapid and reliable results for engineers to deal with potential stamping problems during the early phase of product and tooling design, saving more time and resources.

Causal Analysis to a Subway Accident: A Comparison of STAMP and RAIB

Directory of Open Access Journals (Sweden)

Zhou Yao

2018-01-01

Full Text Available Accident investigation and analysis after the accident, vital to prevent the occurrence of similar accident and improve the safety of the system. Different methods led to a different understanding of the accident. In this paper, a subway accident was analysed with a systemic accident analysis model – STAMP (System-Theoretic Accident Modelling and Processes. The hierarchical safety control structure was obtained, and the system-level safety constraints were obtained, controllers of the physical layer were analysed one by one, and put forward the relevant safety requirements and constraints, the dynamic analysis of the structure of the safety control is carried out, and the targeted recommendations are pointed out. In comparison with the analysis results obtained by the Rail Accident Investigation Branch (RAIB. Some useful findings have been concluded. STAMP treats safety as a control problem and reduces or eliminates causes of the accident from the controlling perspective. Whereas RAIB obtains causes of the accident by analysing the sequence of events related to the accident and reasons of these events, then chooses one(or moreevent(s as the immediate cause and some of the key events as causal factors. RAIB analysis is based on the sequential event models, but STAMP analysis provides us with a holistic, dynamic way to control system to maintain safety.

Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

International Nuclear Information System (INIS)

Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

2015-01-01

This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

Energy Technology Data Exchange (ETDEWEB)

Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

2015-07-01

This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

Cross-Validation of Survival Bump Hunting by Recursive Peeling Methods.

Science.gov (United States)

Dazard, Jean-Eudes; Choe, Michael; LeBlanc, Michael; Rao, J Sunil

2014-08-01

We introduce a survival/risk bump hunting framework to build a bump hunting model with a possibly censored time-to-event type of response and to validate model estimates. First, we describe the use of adequate survival peeling criteria to build a survival/risk bump hunting model based on recursive peeling methods. Our method called "Patient Recursive Survival Peeling" is a rule-induction method that makes use of specific peeling criteria such as hazard ratio or log-rank statistics. Second, to validate our model estimates and improve survival prediction accuracy, we describe a resampling-based validation technique specifically designed for the joint task of decision rule making by recursive peeling (i.e. decision-box) and survival estimation. This alternative technique, called "combined" cross-validation is done by combining test samples over the cross-validation loops, a design allowing for bump hunting by recursive peeling in a survival setting. We provide empirical results showing the importance of cross-validation and replication.

Hunting, Livelihoods and Declining Wildlife in the Hponkanrazi Wildlife Sanctuary, North Myanmar

Science.gov (United States)

Rao, Madhu; Htun, Saw; Zaw, Than; Myint, Than

2010-08-01

The Hponkanrazi Wildlife Sanctuary, North Myanmar and three contiguous protected areas, comprise some of the largest expanses of natural forest remaining in the region. Demand for wildlife products has resulted in unsustainable exploitation of commercially valuable species resulting in local extirpation of vulnerable species. Camera trap, track and sign, and questionnaire-based surveys were used to examine (a) wildlife species targeted by hunters, (b) the importance of wild meat for household consumption, and (c) the significance of hunting as a livelihood activity for resident villages. Certain commercially valuable species highly preferred by hunters were either completely absent from hunt records (tiger, musk deer and otter) or infrequently obtained during actual hunts (bear, pangolin). Species obtained by hunters were commonly occurring species such as muntjacs with low commercial value and not highly preferred by hunters. Fifty eight percent of respondents ( n = 84) indicated trade, 27% listed subsistence use and 14% listed human-wildlife conflict as the main reason for hunting ( n = 84). Average amount of wild meat consumed per month is not significantly higher during the hunting season compared to the planting season (paired t-test, P > 0.05). Throughout the year, the average amount of fish consumed per month was higher than livestock or wild meat (Friedman test, P < 0.0001). Hunting is driven largely by trade and wild meat, while not a critical source of food for a large number of families could potentially be an important, indirect source of access to food for hunting families. Findings and trends from this study are potentially useful in helping design effective conservation strategies to address globally prevalent problems of declining wildlife populations and dependent human communities. The study provides recommendations to reduce illegal hunting and protect vulnerable species by strengthening park management through enforcement, increasing the

Subsistence Hunting on a Pioneer Front of Amazonia: Case of Uruará

Directory of Open Access Journals (Sweden)

T. Bonaudo

2001-03-01

Full Text Available Although prohibited, hunting is widely practiced by rural populations settled along the Transamazon Highway. A diagnostic of subsistence hunting was conducted in 1997 in the Uruará district of Brazil. Beat, hide and trap were the three main hunting techniques, and each one targeted a specific type of game. Although these techniques were rudimentary, 62% of the hunts were successful. Hunters kept their movements within five kilometers at most from their homes, thus covering an 80 km² area. The number of species caught was low: pacas (Agouti paca, deer (Mazama sp. and collared peccaries (Tayassu tajacu provided more than 70% of game meat. The red mazama (Mazama americana, the favorite species, and the paca underwent the highest hunting pressure. In addition to social and ludic roles, hunting had a real nutritional value. Mean daily game meat consumption ranged from 36 to 45.9 g per person (i.e. 13.1–16.7 kg per person per year, depending on the origin of the hunters (urban or rural, respectively. Game hunting did not seem to be the main factor for loss of biodiversity, which might rather result from the transformation of the forest ecosystem into agricultural zones: the habitats were parceled out, generating a reduction in the biodiversity. Community management of wildlife and development of new activities such as breeding of wild animals could help preserve natural resources.

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Directory of Open Access Journals (Sweden)

Aizawa Tatsuhiko

2016-01-01

Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

Provisioning of game meat to rural communities as a benefit of sport hunting in Zambia.

Directory of Open Access Journals (Sweden)

Paula A White

Full Text Available Sport hunting has reportedly multiple benefits to economies and local communities; however, few of these benefits have been quantified. As part of their lease agreements with the Zambia Wildlife Authority, sport hunting operators in Zambia are required to provide annually to local communities free of charge i.e., provision a percentage of the meat obtained through sport hunting. We characterized provisioning of game meat to rural communities by the sport hunting industry in Zambia for three game management areas (GMAs during 2004-2011. Rural communities located within GMAs where sport hunting occurred received on average > 6,000 kgs per GMA of fresh game meat annually from hunting operators. To assess hunting industry compliance, we also compared the amount of meat expected as per the lease agreements versus observed amounts of meat provisioned from three GMAs during 2007-2009. In seven of eight annual comparisons of these GMAs, provisioning of meat exceeded what was required in the lease agreements. Provisioning occurred throughout the hunting season and peaked during the end of the dry season (September-October coincident with when rural Zambians are most likely to encounter food shortages. We extrapolated our results across all GMAs and estimated 129,771 kgs of fresh game meat provisioned annually by the sport hunting industry to rural communities in Zambia at an approximate value for the meat alone of >US$600,000 exclusive of distribution costs. During the hunting moratorium (2013-2014, this supply of meat has halted, likely adversely affecting rural communities previously reliant on this food source. Proposed alternatives to sport hunting should consider protein provisioning in addition to other benefits (e.g., employment, community pledges, anti-poaching funds that rural Zambian communities receive from the sport hunting industry.

Provisioning of game meat to rural communities as a benefit of sport hunting in Zambia.

Science.gov (United States)

White, Paula A; Belant, Jerrold L

2015-01-01

Sport hunting has reportedly multiple benefits to economies and local communities; however, few of these benefits have been quantified. As part of their lease agreements with the Zambia Wildlife Authority, sport hunting operators in Zambia are required to provide annually to local communities free of charge i.e., provision a percentage of the meat obtained through sport hunting. We characterized provisioning of game meat to rural communities by the sport hunting industry in Zambia for three game management areas (GMAs) during 2004-2011. Rural communities located within GMAs where sport hunting occurred received on average > 6,000 kgs per GMA of fresh game meat annually from hunting operators. To assess hunting industry compliance, we also compared the amount of meat expected as per the lease agreements versus observed amounts of meat provisioned from three GMAs during 2007-2009. In seven of eight annual comparisons of these GMAs, provisioning of meat exceeded what was required in the lease agreements. Provisioning occurred throughout the hunting season and peaked during the end of the dry season (September-October) coincident with when rural Zambians are most likely to encounter food shortages. We extrapolated our results across all GMAs and estimated 129,771 kgs of fresh game meat provisioned annually by the sport hunting industry to rural communities in Zambia at an approximate value for the meat alone of >US$600,000 exclusive of distribution costs. During the hunting moratorium (2013-2014), this supply of meat has halted, likely adversely affecting rural communities previously reliant on this food source. Proposed alternatives to sport hunting should consider protein provisioning in addition to other benefits (e.g., employment, community pledges, anti-poaching funds) that rural Zambian communities receive from the sport hunting industry.

Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

International Nuclear Information System (INIS)

Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

2007-01-01

It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

50 CFR 32.40 - Massachusetts.

Science.gov (United States)

2010-10-01

.... [Reserved] C. Big Game Hunting. [Reserved] D. Sport Fishing. We allow fishing in designated areas of the...] C. Big Game Hunting. We allow archery hunting of whitetail deer on designated areas of the refuge in... Wildlife Refuge A. Migratory Game Bird Hunting. [Reserved] B. Upland Game Hunting. [Reserved] C. Big Game...

Hunting and fishing settlements in Upernavik district of Northern Greenland

DEFF Research Database (Denmark)

Hendriksen, Kåre; Jørgensen, Ulrik

2015-01-01

Inuit in the Upernavik district of Northern Greenland has in generations used the winter sea ice as the basis for the essential hunting of seals, white- and narwhales. Since the late 1980’ies hunting has been combined with increasing fishery of Greenland halibut during summer from dinghies and in...

Orbital phlebography in patients with Tolosa-Hunt's syndrome in comparison with normal subjects

International Nuclear Information System (INIS)

Hannerz, J.; Ericson, K.; Bergstrand, G.; Karolinska Sjukhuset, Stockholm

1984-01-01

Orbital phlebography has been reported to be pathologic in some patients with Tolosa-Hunt's syndrome (recurrent painful ophthalmoplegia). A systematic study of the phlebographic findings in Tolosa-Hunt's syndrome in comparison with a normal material seems not to have been performed. In this investigation, orbital phlebography was performed in 19 patients with Tolosa-Hunt's syndrome and in a reference group of 23 persons without the disease. In 13 of 19 patients (68%) with Tolosa-Hunt's syndrome, the phlebography was pathologic (narrowing or occlusion of particularly the third segment of the superior ophthalmic vein, partial occlusion of the cavernous sinus). Orbital phlebography was normal in all but one of the subjects in the reference group. The medical history of this subject in retrospect revealed symptoms other than painful ophthalmoplegia commonly found in patients with Tolosa-Hunt's syndrome, suggesting that he suffered from a variant of the disease causing the syndrome. In one patient with recurrent painful ophthalmoplegia a biopsy from an eye muscle showed venous vasculitis, probably indicating the basic pathology behind the phlebographic changes in patients with Tolosa-Hunt's syndrome. (orig.)

The Importance of Hunting and Hunting Areas for Big and Small Game (Food) for the Tourism Development in the Crna River Basin in the Republic of Macedonia

OpenAIRE

Koteski, Cane; Josheski, Dushko; Jakovlev, Zlatko; Bardarova, Snezana; Serafimova, Mimoza

2014-01-01

The Crna River is a river in the Republic of Macedonia, right tributary to Vardar. Its source is in the mountains of Western Macedonia, west of Krusevo. It flows through the village of Sopotnica, and southwards through the plains east of Bitola. The name means “black river” in Macedonian, which is translation for its former Thracian name. The purpose of this paper is to show the hunting and hunting areas for big and small Game (food), the structure of the areas of certain hunting, fi...

Birds from the Old East Slavic settlement “Igren 8” (12th–13th century AD; Ukraine

Directory of Open Access Journals (Sweden)

L. V. Gorobets

2014-04-01

Full Text Available The work presents the results of the analysis of a species diversity of the Old East Slavic settlement “Igren 8”(Dnipropetrovsk, Ukraine. The settlement occupied the area of nearly 15 hawhich was relatively large for this region. In Medieval period around the mouths of tributaries to the delta of the Dnieperdense forests were located, although the region is located in the south forest-steppe zone and the steppe zone. The majority of hunted birds belong to the group Anatidae (at least 72% of the minimum possible number of individuals. Poultry played the minor role in the diet of the residents of the medieval settlement “Igren 8”. We have drawn the conclusion about birds from “Igren 8”inhabiting water with thickets of the hygrophyte vegetation on the periphery. Nowadays, there are many embryophytes such as Phragmites australis, Typha spp., Glyceria maxima, Acorus calamus and others in these places. Hygrophytes covering of reservoirs is typically less than 20%.

Seabird tissue archival and monitoring project: Egg collections and analytical results 1999-2002

Science.gov (United States)

Vander Pol, Stacy S.; Christopher, Steven J.; Roseneau, David G.; Becker, Paul R.; Day, Russel D.; Kucklick, John R.; Pugh, Rebecca S.; Simac, Kristin S.; Weston-York, Geoff

2003-01-01

In 1998, the U.S. Geological Survey Biological Resources Division (USGS-BRD), the U.S. Fish and Wildlife Service (USFWS) Alaska Maritime National Wildlife Refuge (AMNWR), and the National Institute of Standards and Technology (NIST) began the Seabird Tissue Archival and Monitoring Project (STAMP) to collect and cryogenically bank tissues from seabirds in Alaska for future retrospective analysis of anthropogenic contaminants. The approach of STAMP was similar to that of the Alaska Marine Mammal Tissue Archival Project (AMMTAP). AMMTAP was started in 1987 by NIST and the National Oceanic and Atmospheric Administration (NOAA) as part of the Outer Continental Shelf Environmental Assessment Program sponsored by the Minerals Management Service. Presently sponsored by the USGS-BRD, AMMTAP continues its work as part of a larger national program, the Marine Mammal Health and Stranding Response Program. AMMTAP developed carefully designed sampling and specimen banking protocols. Since 1987, AMMTAP has collected tissues from marine mammals taken in Alaska Native subsistence hunts and has cryogenically banked these tissues at the NIST National Biomonitoring Specimen Bank (NBSB). Through its own analytical work and working in partnership with other researchers both within and outside Alaska, AMMTAP has helped to develop a substantial database on contaminants in Alaska marine mammals. In contrast, data and information is limited on contaminants in Alaska seabirds, which are similar to marine mammals in that they feed near the top of the food chain and have the potential for accumulating anthropogenic contaminants. During its early planning stages, STAMP managers identified the seabird egg as the first tissue of choice for study by the project. There is a relatively long history of using bird eggs for environmental monitoring and for investigating the health status of bird populations. Since 1998, protocols for collecting and processing eggs, and cryogenically banking egg samples

The Bird.

Science.gov (United States)

Hannon, Jean

2001-01-01

Students use a dead bird to learn about bird life, anatomy, and death. Students examine a bird body and discuss what happened to the bird. Uses outdoor education as a resource for learning about animals. (SAH)

Game statistics for the island of Olkiluoto in 2013-2014

International Nuclear Information System (INIS)

Niemi, M.; Nieminen, M.

2015-05-01

The game statistics for the island of Olkiluoto were updated in the summer 2014 and compared with earlier statistics. In addition, the estimated biomass of hunted animals was calculated. The reported game bag and population size estimates are based on the annual action report of local hunting club (Olkiluodon Metsaestysseura ry) and interviews of hunting club's secretary. No moose or deer inventories were made in the winter 2013-2014. The moose population has been a slightly increasing when comparing the previous year; there were 4-6 individuals on the island after hunting season. The number of moose varies because they tend to move between the island and mainland. Winter 2013-2014 was relatively easy for white-tailed deer and roe deer but the predation caused by lynxes inhibits the increase of populations. However, the current amount of lynxes on the island is unknown because the lack of snow in the winter 2013-2014. In the summer of 2014, there were several lynx observations. The number of hunted raccoon dogs was almost four times as large as in the previous year; altogether 26 individuals were killed. There were no noticeable changes in the number of other hunted small or medium-sized predators. American minks were not killed at all. The total number of hunted hares decreased from eleven to seven. Once again, mallard was the most common hunted bird species followed by hooded crow. Other bird species hunted were wood pigeon, herring gull, hazel grouse, wigeon, teal and common pochard. The total biomass hunted was approximately 1 225 kilos (1 170 for mammals and 55 for birds) which was 305 kilos more than in the previous year. The biomass destined to human consumption (i.e. game meat) was approximately 415 kilos (400 kilos for mammals, 15 for birds). (orig.)

Game statistics for the island of Olkiluoto in 2013-2014

Energy Technology Data Exchange (ETDEWEB)

Niemi, M.; Nieminen, M. [Faunatica Oy, Espoo (Finland)

2015-05-15

The game statistics for the island of Olkiluoto were updated in the summer 2014 and compared with earlier statistics. In addition, the estimated biomass of hunted animals was calculated. The reported game bag and population size estimates are based on the annual action report of local hunting club (Olkiluodon Metsaestysseura ry) and interviews of hunting club's secretary. No moose or deer inventories were made in the winter 2013-2014. The moose population has been a slightly increasing when comparing the previous year; there were 4-6 individuals on the island after hunting season. The number of moose varies because they tend to move between the island and mainland. Winter 2013-2014 was relatively easy for white-tailed deer and roe deer but the predation caused by lynxes inhibits the increase of populations. However, the current amount of lynxes on the island is unknown because the lack of snow in the winter 2013-2014. In the summer of 2014, there were several lynx observations. The number of hunted raccoon dogs was almost four times as large as in the previous year; altogether 26 individuals were killed. There were no noticeable changes in the number of other hunted small or medium-sized predators. American minks were not killed at all. The total number of hunted hares decreased from eleven to seven. Once again, mallard was the most common hunted bird species followed by hooded crow. Other bird species hunted were wood pigeon, herring gull, hazel grouse, wigeon, teal and common pochard. The total biomass hunted was approximately 1 225 kilos (1 170 for mammals and 55 for birds) which was 305 kilos more than in the previous year. The biomass destined to human consumption (i.e. game meat) was approximately 415 kilos (400 kilos for mammals, 15 for birds). (orig.)

Nonlinear effects of group size on the success of wolves hunting elk

Science.gov (United States)

MacNulty, Daniel R.; Smith, Douglas W.; Mech, L. David; Vucetich, John A.; Packer, Craig

2012-01-01

Despite the popular view that social predators live in groups because group hunting facilitates prey capture, the apparent tendency for hunting success to peak at small group sizes suggests that the formation of large groups is unrelated to prey capture. Few empirical studies, however, have tested for nonlinear relationships between hunting success and group size, and none have demonstrated why success trails off after peaking. Here, we use a unique dataset of observations of individually known wolves (Canis lupus) hunting elk (Cervus elaphus) in Yellowstone National Park to show that the relationship between success and group size is indeed nonlinear and that individuals withholding effort (free riding) is why success does not increase across large group sizes. Beyond 4 wolves, hunting success leveled off, and individual performance (a measure of effort) decreased for reasons unrelated to interference from inept hunters, individual age, or size. But performance did drop faster among wolves with an incentive to hold back, i.e., nonbreeders with no dependent offspring, those performing dangerous predatory tasks, i.e., grabbing and restraining prey, and those in groups of proficient hunters. These results suggest that decreasing performance was free riding and that was why success leveled off in groups with >4 wolves that had superficially appeared to be cooperating. This is the first direct evidence that nonlinear trends in group hunting success reflect a switch from cooperation to free riding. It also highlights how hunting success per se is unlikely to promote formation and maintenance of large groups.

50 CFR 32.27 - Delaware.

Science.gov (United States)

2010-10-01

... in the field. C. Big Game Hunting. We allow hunting of turkey and deer on designated areas of the.... D. Sport Fishing. [Reserved] Prime Hook National Wildlife Refuge A. Migratory Game Bird Hunting. We... manager. C. Big Game Hunting. We allow hunting of white-tailed deer on designated areas of the refuge in...

Embargo on Lion Hunting Trophies from West Africa: An Effective Measure or a Threat to Lion Conservation?

Science.gov (United States)

Bouché, Philippe; Crosmary, William; Kafando, Pierre; Doamba, Benoit; Kidjo, Ferdinand Claude; Vermeulen, Cédric; Chardonnet, Philippe

2016-01-01

The W-Arly-Pendjari (WAP) ecosystem, shared among Benin, Burkina Faso and Niger, represents the last lion stronghold of West Africa. To assess the impact of trophy hunting on lion populations in hunting areas of the WAP, we analyzed trends in harvest rates from 1999 to 2014. We also investigated whether the hunting areas with higher initial hunting intensity experienced steeper declines in lion harvest between 1999 and 2014, and whether lion densities in hunting areas were lower than in national parks. Lion harvest rate remained overall constant in the WAP. At initial hunting intensities below 1.5 lions/1000km2, most hunting areas experienced an increase in lion harvest rate, although that increase was of lower magnitude for hunting areas with higher initial hunting intensity. The proportion of hunting areas that experienced a decline in lion harvest rate increased at initial hunting intensities above 1.5 lions/1000km2. In 2014, the lion population of the WAP was estimated with a spoor count at 418 (230-648) adults and sub-adult individuals, comparable to the 311 (123-498) individuals estimated in the previous 2012 spoor survey. We found no significant lion spoor density differences between national parks and hunting areas. Hunting areas with higher mean harvest rates did not have lower lion densities. The ratio of large adult males, females and sub-adults was similar between the national parks and the hunting areas. These results suggested that the lion population was not significantly affected by hunting in the WAP. We concluded that a quota of 1 lion/1000km2 would be sustainable for the WAP. Based on our results, an import embargo on lion trophies from the WAP would not be justified. It could ruin the incentive of local actors to conserve lions in hunting areas, and lead to a drastic reduction of lion range in West Africa.

Disruption of Ttll5/stamp gene (tubulin tyrosine ligase-like protein 5/SRC-1 and TIF2-associated modulatory protein gene) in male mice causes sperm malformation and infertility.

Science.gov (United States)

Lee, Geun-Shik; He, Yuanzheng; Dougherty, Edward J; Jimenez-Movilla, Maria; Avella, Matteo; Grullon, Sean; Sharlin, David S; Guo, Chunhua; Blackford, John A; Awasthi, Smita; Zhang, Zhenhuan; Armstrong, Stephen P; London, Edra C; Chen, Weiping; Dean, Jurrien; Simons, S Stoney

2013-05-24

TTLL5/STAMP (tubulin tyrosine ligase-like family member 5) has multiple activities in cells. TTLL5 is one of 13 TTLLs, has polyglutamylation activity, augments the activity of p160 coactivators (SRC-1 and TIF2) in glucocorticoid receptor-regulated gene induction and repression, and displays steroid-independent growth activity with several cell types. To examine TTLL5/STAMP functions in whole animals, mice were prepared with an internal deletion that eliminated several activities of the Stamp gene. This mutation causes both reduced levels of STAMP mRNA and C-terminal truncation of STAMP protein. Homozygous targeted mutant (Stamp(tm/tm)) mice appear normal except for marked decreases in male fertility associated with defects in progressive sperm motility. Abnormal axonemal structures with loss of tubulin doublets occur in most Stamp(tm/tm) sperm tails in conjunction with substantial reduction in α-tubulin polyglutamylation, which closely correlates with the reduction in mutant STAMP mRNA. The axonemes in other structures appear unaffected. There is no obvious change in the organs for sperm development of WT versus Stamp(tm/tm) males despite the levels of WT STAMP mRNA in testes being 20-fold higher than in any other organ examined. This defect in male fertility is unrelated to other Ttll genes or 24 genes previously identified as important for sperm function. Thus, STAMP appears to participate in a unique, tissue-selective TTLL-mediated pathway for α-tubulin polyglutamylation that is required for sperm maturation and motility and may be relevant for male fertility.

Tolosa-Hunt syndrome: MRI appearances

International Nuclear Information System (INIS)

Jain, R.; Sawhney, S.; Koul, R. L.; Chand, P.

2008-01-01

Full text: A review of MRI findings in seven patients with Tolosa-Hunt syndrome was carried out. Seven patients presented with unilateral painful ophthalmoplegia. Magnetic resonance imaging studies were carried out to evaluate the cavernous sinuses and orbits. Coronal fast spin-echo T 2 -weighted images and fat-saturated T 1 -weighted coronal and transverse images with and without contrast enhancement were obtained for the cavernous sinuses and orbits. All patients showed focal-enhancing masses expanding the ipsilateral cavernous sinus. In one patient the mass was extending to the orbital apex and intraorbital. All patients recovered on corticosteroid therapy and resolution of the masses was documented on follow-up MRI studies in five patients. One patient had a relapse of symptoms after discontinuing therapy. Magnetic resonance imaging studies of the cavernous sinus and orbital apex show high sensitivity for the detection and follow up of inflammatory mass lesions in Tolosa-Hunt syndrome. Magnetic resonance imaging should be the initial screening study in these patients.

Effects of trophy hunting on lion and leopard populations in Tanzania.

Science.gov (United States)

Packer, C; Brink, H; Kissui, B M; Maliti, H; Kushnir, H; Caro, T

2011-02-01

Tanzania holds most of the remaining large populations of African lions (Panthera leo) and has extensive areas of leopard habitat (Panthera pardus), and both species are subjected to sizable harvests by sport hunters. As a first step toward establishing sustainable management strategies, we analyzed harvest trends for lions and leopards across Tanzania's 300,000 km(2) of hunting blocks. We summarize lion population trends in protected areas where lion abundance has been directly measured and data on the frequency of lion attacks on humans in high-conflict agricultural areas. We place these findings in context of the rapidly growing human population in rural Tanzania and the concomitant effects of habitat loss, human-wildlife conflict, and cultural practices. Lion harvests declined by 50% across Tanzania between 1996 and 2008, and hunting areas with the highest initial harvests suffered the steepest declines. Although each part of the country is subject to some form of anthropogenic impact from local people, the intensity of trophy hunting was the only significant factor in a statistical analysis of lion harvest trends. Although leopard harvests were more stable, regions outside the Selous Game Reserve with the highest initial leopard harvests again showed the steepest declines. Our quantitative analyses suggest that annual hunting quotas be limited to 0.5 lions and 1.0 leopard/1000 km(2) of hunting area, except hunting blocks in the Selous Game Reserve, where harvests should be limited to 1.0 lion and 3.0 leopards/1000 km(2) . ©2010 Society for Conservation Biology.

Elk and mule deer responses to variation in hunting pressure.

Science.gov (United States)

Bruce K. Johnson; Alan A. Ager; James H. Noyes; Norm. Cimon

2004-01-01

Hunting can exert a variety of effects on both targeted and nontargeted ungulates, and animals either run or hide in response to hunting pressure. If animals successfully elude hunters by running, the energetic cost may deplete fat reserves needed for survival during winter in temperate regions. If animals successfully elude hunters by hiding, there may be an energetic...

Estimation of Correlation between the Number of Individuals and Biogenic Capacity of the Hunting Terrain 56, Forest District Lunca Timişului, for 13 Hunting Species in 2006-2010 Period

Directory of Open Access Journals (Sweden)

Dorel Dronca

2011-05-01

Full Text Available Integration of the Romania in the UE, is imposing a special attention to hunting animals populations. The aim of the present paper was to study the quantitative evolution of the hunting population for the 13th species, in the period 2006-2010, in the hunting terrain 56 Chevereş, from Forest Domain – Lunca Timişului, with a total surface of 9109ha. After the observations were performed, the present paper is stating that on this hunting ground had no good correlation between the number of individuals and the biogenic capacity of the hunting fond at the following species: Red Deer (Cervus elaphus L., Fallow Deer (Dama dama L, Roe Deer (Caproleus Caproleus L., Wild hog (Sus scrofa L., European hare (Lepus europaeus P., in turn at the rest of the studied species the correlation is good. For the species in regress the observations are recommending the following with attention of the natural selection and the improvement of the artificial selection.

Coastal Resources Atlas: Long Island: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for wading birds, shorebirds, waterfowl, raptors, diving birds, seabirds, passerine birds, and gulls and...

The trophy hunting of African lions: scale, current management practices and factors undermining sustainability.

Science.gov (United States)

Lindsey, Peter Andrew; Balme, Guy Andrew; Funston, Paul; Henschel, Philipp; Hunter, Luke; Madzikanda, Hilary; Midlane, Neil; Nyirenda, Vincent

2013-01-01

The trophy hunting of lions Panthera leo is contentious due to uncertainty concerning conservation impacts and because of highly polarised opinions about the practice. African lions are hunted across at least ~558,000 km(2), which comprises 27-32% of the lion range in countries where trophy hunting of the species is permitted. Consequently, trophy hunting has potential to impart significant positive or negative impacts on lions. Several studies have demonstrated that excessive trophy harvests have driven lion population declines. There have been several attempts by protectionist non-governmental organisations to reduce or preclude trophy hunting via restrictions on the import and export of lion trophies. We document the management of lion hunting in Africa and highlight challenges which need addressing to achieve sustainability. Problems include: unscientific bases for quota setting; excessive quotas and off-takes in some countries; fixed quotas which encourage over-harvest; and lack of restrictions on the age of lions that can be hunted. Key interventions needed to make lion hunting more sustainable, include implementation of: enforced age restrictions; improved trophy monitoring; adaptive management of quotas and a minimum length of lion hunts of at least 21 days. Some range states have made important steps towards implementing such improved management and off-takes have fallen steeply in recent years. For example age restrictions have been introduced in Tanzania and in Niassa in Mozambique, and are being considered for Benin and Zimbabwe, several states have reduced quotas, and Zimbabwe is implementing trophy monitoring. However, further reforms are needed to ensure sustainability and reduce conservation problems associated with the practice while allowing retention of associated financial incentives for conservation.

The trophy hunting of African lions: scale, current management practices and factors undermining sustainability.

Directory of Open Access Journals (Sweden)

Peter Andrew Lindsey

Full Text Available The trophy hunting of lions Panthera leo is contentious due to uncertainty concerning conservation impacts and because of highly polarised opinions about the practice. African lions are hunted across at least ~558,000 km(2, which comprises 27-32% of the lion range in countries where trophy hunting of the species is permitted. Consequently, trophy hunting has potential to impart significant positive or negative impacts on lions. Several studies have demonstrated that excessive trophy harvests have driven lion population declines. There have been several attempts by protectionist non-governmental organisations to reduce or preclude trophy hunting via restrictions on the import and export of lion trophies. We document the management of lion hunting in Africa and highlight challenges which need addressing to achieve sustainability. Problems include: unscientific bases for quota setting; excessive quotas and off-takes in some countries; fixed quotas which encourage over-harvest; and lack of restrictions on the age of lions that can be hunted. Key interventions needed to make lion hunting more sustainable, include implementation of: enforced age restrictions; improved trophy monitoring; adaptive management of quotas and a minimum length of lion hunts of at least 21 days. Some range states have made important steps towards implementing such improved management and off-takes have fallen steeply in recent years. For example age restrictions have been introduced in Tanzania and in Niassa in Mozambique, and are being considered for Benin and Zimbabwe, several states have reduced quotas, and Zimbabwe is implementing trophy monitoring. However, further reforms are needed to ensure sustainability and reduce conservation problems associated with the practice while allowing retention of associated financial incentives for conservation.

Studying the Solar System Can Be More than Just "Stamp Collecting"

Science.gov (United States)

LoPresto, Michael C.

2017-01-01

While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

How much land is needed for feral pig hunting in Hawai'i?

Science.gov (United States)

Hess, Steven C.; Jacobi, James D.

2014-01-01

Hunting is often considered to be incompatible with conservation of native biota and watershed functions in Hawai'i. Management actions for conservation generally exclude large non-native mammals from natural areas, thereby reducing the amount of land area available for hunting activities and the maintenance of sustainable game populations. An approach which may be useful in addressing the necessary minimum amount of land area allocated for hunting in Hawai'i is to determine the amount of land area necessary for sustaining populations of hunted animals to meet current levels harvested by the public. We ask: What is the total amount of land necessary to provide sustained-yield hunting of game meat for food at the current harvest level on Hawai'i Island if only feral pigs (Sus scrofa) were to be harvested? We used a simplistic analysis to estimate that 1 317.6 km2-1 651.4 km2 would be necessary to produce 187 333.6 kg of feral pig meat annually based on the range of dressed weight per whole pig, the proportion of a pig population that can be sustainably removed annually, and the density of pig populations in the wild. This amount of area comprises 12.6-15.8% of the total land area of Hawai'i Island, but more likely represents 27.6-43.5% of areas that may be compatible with sustained-yield hunting.

Influence of group size on the success of wolves hunting bison.

Science.gov (United States)

MacNulty, Daniel R; Tallian, Aimee; Stahler, Daniel R; Smith, Douglas W

2014-01-01

An intriguing aspect of social foraging behaviour is that large groups are often no better at capturing prey than are small groups, a pattern that has been attributed to diminished cooperation (i.e., free riding) in large groups. Although this suggests the formation of large groups is unrelated to prey capture, little is known about cooperation in large groups that hunt hard-to-catch prey. Here, we used direct observations of Yellowstone wolves (Canis lupus) hunting their most formidable prey, bison (Bison bison), to test the hypothesis that large groups are more cooperative when hunting difficult prey. We quantified the relationship between capture success and wolf group size, and compared it to previously reported results for Yellowstone wolves hunting elk (Cervus elaphus), a prey that was, on average, 3 times easier to capture than bison. Whereas improvement in elk capture success levelled off at 2-6 wolves, bison capture success levelled off at 9-13 wolves with evidence that it continued to increase beyond 13 wolves. These results are consistent with the hypothesis that hunters in large groups are more cooperative when hunting more formidable prey. Improved ability to capture formidable prey could therefore promote the formation and maintenance of large predator groups, particularly among predators that specialize on such prey.

Influence of group size on the success of wolves hunting bison.

Directory of Open Access Journals (Sweden)

Daniel R MacNulty

Full Text Available An intriguing aspect of social foraging behaviour is that large groups are often no better at capturing prey than are small groups, a pattern that has been attributed to diminished cooperation (i.e., free riding in large groups. Although this suggests the formation of large groups is unrelated to prey capture, little is known about cooperation in large groups that hunt hard-to-catch prey. Here, we used direct observations of Yellowstone wolves (Canis lupus hunting their most formidable prey, bison (Bison bison, to test the hypothesis that large groups are more cooperative when hunting difficult prey. We quantified the relationship between capture success and wolf group size, and compared it to previously reported results for Yellowstone wolves hunting elk (Cervus elaphus, a prey that was, on average, 3 times easier to capture than bison. Whereas improvement in elk capture success levelled off at 2-6 wolves, bison capture success levelled off at 9-13 wolves with evidence that it continued to increase beyond 13 wolves. These results are consistent with the hypothesis that hunters in large groups are more cooperative when hunting more formidable prey. Improved ability to capture formidable prey could therefore promote the formation and maintenance of large predator groups, particularly among predators that specialize on such prey.

Correlation and persistence of hunting and logging impacts on tropical rainforest mammals.

Science.gov (United States)

Brodie, Jedediah F; Giordano, Anthony J; Zipkin, Elise F; Bernard, Henry; Mohd-Azlan, Jayasilan; Ambu, Laurentius

2015-02-01

Humans influence tropical rainforest animals directly via exploitation and indirectly via habitat disturbance. Bushmeat hunting and logging occur extensively in tropical forests and have large effects on particular species. But how they alter animal diversity across landscape scales and whether their impacts are correlated across species remain less known. We used spatially widespread measurements of mammal occurrence across Malaysian Borneo and recently developed multispecies hierarchical models to assess the species richness of medium- to large-bodied terrestrial mammals while accounting for imperfect detection of all species. Hunting was associated with 31% lower species richness. Moreover, hunting remained high even where richness was very low, highlighting that hunting pressure persisted even in chronically overhunted areas. Newly logged sites had 11% lower species richness than unlogged sites, but sites logged >10 years previously had richness levels similar to those in old-growth forest. Hunting was a more serious long-term threat than logging for 91% of primate and ungulate species. Hunting and logging impacts across species were not correlated across taxa. Negative impacts of hunting were the greatest for common mammalian species, but commonness versus rarity was not related to species-specific impacts of logging. Direct human impacts appeared highly persistent and lead to defaunation of certain areas. These impacts were particularly severe for species of ecological importance as seed dispersers and herbivores. Indirect impacts were also strong but appeared to attenuate more rapidly than previously thought. The lack of correlation between direct and indirect impacts across species highlights that multifaceted conservation strategies may be needed for mammal conservation in tropical rainforests, Earth's most biodiverse ecosystems. © 2014 Society for Conservation Biology.

STAMPS: development and verification of swallowing kinematic analysis software.

Science.gov (United States)

Lee, Woo Hyung; Chun, Changmook; Seo, Han Gil; Lee, Seung Hak; Oh, Byung-Mo

2017-10-17

Swallowing impairment is a common complication in various geriatric and neurodegenerative diseases. Swallowing kinematic analysis is essential to quantitatively evaluate the swallowing motion of the oropharyngeal structures. This study aims to develop a novel swallowing kinematic analysis software, called spatio-temporal analyzer for motion and physiologic study (STAMPS), and verify its validity and reliability. STAMPS was developed in MATLAB, which is one of the most popular platforms for biomedical analysis. This software was constructed to acquire, process, and analyze the data of swallowing motion. The target of swallowing structures includes bony structures (hyoid bone, mandible, maxilla, and cervical vertebral bodies), cartilages (epiglottis and arytenoid), soft tissues (larynx and upper esophageal sphincter), and food bolus. Numerous functions are available for the spatiotemporal parameters of the swallowing structures. Testing for validity and reliability was performed in 10 dysphagia patients with diverse etiologies and using the instrumental swallowing model which was designed to mimic the motion of the hyoid bone and the epiglottis. The intra- and inter-rater reliability tests showed excellent agreement for displacement and moderate to excellent agreement for velocity. The Pearson correlation coefficients between the measured and instrumental reference values were nearly 1.00 (P software is expected to be useful for researchers who are interested in the swallowing motion analysis.

Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

International Nuclear Information System (INIS)

Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

2007-01-01

Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

Determination of Unit Pressure Force in Material Volume in the Course of Refractory Stamping Press Moulding

Directory of Open Access Journals (Sweden)

Orłowicz A.W.

2016-06-01

Full Text Available The paper presents results of assessment of the unit pressure force within the refractory material volume in the course press-moulding of stampings for refractory precast shapes. The force was evaluated with the use of physical simulation of deformation undergone by lead balls placed in the raw refractory mass subjected to pressing in a metal die. To determine the value of unit pressure force applied to the aggregate grains in the course of stamping press-moulding, physical model of deformation of a sphere induced by the uniaxial stress state was used.

Drivers of change in hunter offtake and hunting strategies in Sendje, Equatorial Guinea.

Science.gov (United States)

Gill, David J C; Fa, John E; Rowcliffe, J Marcus; Kümpel, Noëlle F

2012-12-01

Economic development in Africa is expected to increase levels of bushmeat hunting through rising demand for meat and improved transport infrastructure. However, few studies have tracked long-term changes in hunter behavior as a means of testing this prediction. We evaluated changes in hunter behavior in a rural community in Equatorial Guinea over a period of rapid national economic growth, during which time road access to the regional capital greatly improved. We conducted offtake surveys (Supporting Information) over 3 7-week periods at the same time of year in 1998, 2003, and 2010 and conducted hunter and household interviews (Supporting Information) in 2003 and 2010. We tested whether relations existed among catch, hunting effort, hunting strategy, and income earned through hunting and other livelihoods in 2003 and 2010. Although village offtake increased from 1775 kg in 1998 to 4172 kg in 2003, it decreased in 2010 to 1361 kg. Aggregate catch per unit effort (i.e., number of carcasses caught per hunter and per trap) decreased from 2003 to 2010, and the majority of hunters reported a decrease in abundance of local fauna. Although these results are indicative of unsustainable hunting, cumulative changes in offtake and catch per unit effort were driven by a contraction in the total area hunted following an out-migration of 29 of the village's hunters, most of whom left to gain employment in the construction industry, after 2003. Hunters operating in both 2003 and 2010 hunted closer to the village because an increased abundance of elephants posed a danger and because they desired to earn income through other activities. Our study provides an example of national economic development contributing to a reduction in the intensity and extent of hunting. ©2012 Society for Conservation Biology.

Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

NARCIS (Netherlands)

Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

2007-01-01

The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

Economic Impact of Hunting Expenditures on Southern U.S.

OpenAIRE

Poudel, Jagdish; Munn, Ian A.; Henderson, James E.

2013-01-01

Hunting, fishing and wildlife-associated recreation expenditures have played an important role in the U.S economy and help promote conservation and environmental goals. The 2006 U.S Fish and Wildlife Service (USFWS) survey reported 87.5 million people aged 16 and above participated in wildlife-associated recreation activities, spending $122.4 billion on trips and equipment. This spending is a 13 percent increase since 2001. The recently released 2011 National Survey of Fishing, Hunting and Wi...

Cost-benefit analysis of providing a special subsistence allowance to military personnel who qualify for food stamps

OpenAIRE

Becker, Curtis A., Jr.

2000-01-01

Approved for public release, distribution is unlimited Recent reports cite that military Food Stamp Program beneficiaries may range from 6,400 to 20,000. The need for food stamps has been attributed to several factors, one of which is the perceived military "pay gap". Although, significant strides have been made in recent years to improve quality of life for our service men and women and their families, the military pay system tends to lag behind the civilian employment cost growth index. ...

Sustainability and comanagement of subsistence hunting in an indigenous reserve in Guyana.

Science.gov (United States)

Shaffer, Christopher A; Milstein, Marissa S; Yukuma, Charakura; Marawanaru, Elisha; Suse, Phillip

2017-10-01

Although hunting is a key component of subsistence strategies of many Amazonians, it is also one of the greatest threats to wildlife. Because indigenous reserves comprise over 20% of Amazonia, effective conservation often requires that conservation professionals work closely with indigenous groups to manage resource use. We used hunter-generated harvesting data in spatially explicit biodemographic models to assess the sustainability of subsistence hunting of indigenous Waiwai in Guyana. We collected data through a hunter self-monitoring program, systematic follows of hunters, and semistructured interviews. We used these data to predict future densities of 2 indicator species, spider monkeys (Ateles paniscus) and bearded sakis (Chiropotes sagulatus), under different scenarios of human population expansion and changing hunting technology. We used encounter rates from transect surveys and hunter catch-per-unit effort (CPUE) to validate model predictions. Paca (Cuniculus paca) (198 /year), Currosaw (Crax alector) (168), and spider monkey (117) were the most frequently harvested species. Predicted densities of spider monkeys were statistically indistinguishable from empirically derived transect data (Kolmogorov-Smirnov D = 0.67, p = 0.759) and CPUE (D = 0.32, p = 1.000), demonstrating the robustness of model predictions. Ateles paniscus and C. sagulatus were predicted to be extirpated from <13% of the Waiwai reserve in 20 years, even under the most intensive hunting scenarios. Our results suggest Waiwai hunting is currently sustainable, primarily due to their low population density and use of bow and arrow. Continual monitoring is necessary, however, particularly if human population increases are accompanied by a switch to shotgun-only hunting. We suggest that hunter self-monitoring and biodemographic modeling can be used effectively in a comanagement approach in which indigenous parabiologists continuously provide hunting data that is then used to update model

Hunting Intensity in the Suhuma Forest Reserve in the Sefwi Wiawso ...

African Journals Online (AJOL)

Hunting intensity in the Suhuma Forest Reserve (SFR) in the Sefwi Wiawso District of the Western Region of Ghana has been investigated. The methodology involved the recording of signs of hunting activity using linetransects, and interviews with hunters. A total of 157 spent cartridges, 21 wire snares, presence of 17 ...

Energy cost and return for hunting in African wild dogs and cheetahs.

Science.gov (United States)

Hubel, Tatjana Y; Myatt, Julia P; Jordan, Neil R; Dewhirst, Oliver P; McNutt, J Weldon; Wilson, Alan M

2016-03-29

African wild dogs (Lycaon pictus) are reported to hunt with energetically costly long chase distances. We used high-resolution GPS and inertial technology to record 1,119 high-speed chases of all members of a pack of six adult African wild dogs in northern Botswana. Dogs performed multiple short, high-speed, mostly unsuccessful chases to capture prey, while cheetahs (Acinonyx jubatus) undertook even shorter, higher-speed hunts. We used an energy balance model to show that the energy return from group hunting and feeding substantially outweighs the cost of multiple short chases, which indicates that African wild dogs are more energetically robust than previously believed. Comparison with cheetah illustrates the trade-off between sheer athleticism and high individual kill rate characteristic of cheetahs, and the energetic robustness of frequent opportunistic group hunting and feeding by African wild dogs.

Exploitation of Hunting and Fishing Tourism in Galați County, Romania

Directory of Open Access Journals (Sweden)

Camară Gabriel

2016-10-01

Full Text Available Galați county is a geographical area that is less valued in terms of tourism, but which benefits by a natural tourism potential. The aim of this study is to identify the potential and the activities of the hunting and fishing tourism. Exploitation of hunting and fishing activities in touristic aim is only partial because of the lack of touristic infrastructure and the lack of collaboration with various travel agencies from this branch of tourism. Proposals that would help the future development and improvement of tourism activity are from “wildlife watching tourism” domain: capturing images with the camera, observing the behavior of hunting species without affecting them, providing information for those interested in the hunting behavior and life fauna, creating a wildlife museum and last but not least, upgrading the transport infrastructure.

Energy cost and return for hunting in African wild dogs and cheetahs

Science.gov (United States)

Hubel, Tatjana Y.; Myatt, Julia P.; Jordan, Neil R.; Dewhirst, Oliver P.; McNutt, J. Weldon; Wilson, Alan M.

2016-01-01

African wild dogs (Lycaon pictus) are reported to hunt with energetically costly long chase distances. We used high-resolution GPS and inertial technology to record 1,119 high-speed chases of all members of a pack of six adult African wild dogs in northern Botswana. Dogs performed multiple short, high-speed, mostly unsuccessful chases to capture prey, while cheetahs (Acinonyx jubatus) undertook even shorter, higher-speed hunts. We used an energy balance model to show that the energy return from group hunting and feeding substantially outweighs the cost of multiple short chases, which indicates that African wild dogs are more energetically robust than previously believed. Comparison with cheetah illustrates the trade-off between sheer athleticism and high individual kill rate characteristic of cheetahs, and the energetic robustness of frequent opportunistic group hunting and feeding by African wild dogs. PMID:27023457

Economic assessment of wild bird mortality induced by the use of lead gunshot in European wetlands.

Science.gov (United States)

Andreotti, Alessandro; Guberti, Vittorio; Nardelli, Riccardo; Pirrello, Simone; Serra, Lorenzo; Volponi, Stefano; Green, Rhys E

2018-01-01

In European wetlands, at least 40 bird species are exposed to the risk of lead poisoning caused by ingestion of spent lead gunshot. Adopting a methodology developed in North America, we estimated that about 700,000 individuals of 16 waterbird species die annually in the European Union (EU) (6.1% of the wintering population) and one million in whole Europe (7.0%) due to acute effects of lead poisoning. Furthermore, threefold more birds suffer sub-lethal effects. We assessed the economic loss due to this lead-induced mortality of these 16 species by calculating the costs of replacing lethally poisoned wild birds by releasing captive-bred ones. We assessed the cost of buying captive-bred waterbirds for release from market surveys and calculated how many captive-bred birds would have to be released to compensate for the loss, taking into account the high mortality rate of captive birds (72.7%) in the months following release into the wild. Following this approach, the annual cost of waterbird mortality induced by lead shot ingestion is estimated at 105 million euros per year in the EU countries and 142 million euros in the whole of Europe. An alternative method, based upon lost opportunities for hunting caused by deaths due to lead poisoning, gave similar results of 129 million euros per year in the EU countries and 185 million euros per year in the whole of Europe. For several reasons these figures should be regarded as conservative. Inclusion of deaths of species for which there were insufficient data and delayed deaths caused indirectly by lead poisoning and effects on reproduction would probably increase the estimated losses substantially. Nevertheless, our results suggest that the benefits of a restriction on the use of lead gunshot over wetlands could exceed the cost of adapting to non-lead ammunition. Copyright © 2017 Elsevier B.V. All rights reserved.

Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

International Nuclear Information System (INIS)

Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

2014-01-01

With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

Hunting, Sale, and Consumption of Bushmeat Killed by Lead-Based Ammunition in Benin

Directory of Open Access Journals (Sweden)

Shukrullah Ahmadi

2018-06-01

Full Text Available Human consumption of animal meat killed by lead ammunition has been reported as a risk factor for elevated blood lead levels. However, little is known about how meat killed by lead ammunition is hunted, prepared, sold, and consumed. We explored the process from hunting to consumption within communities in Benin from the perspective of preventive measures. We conducted 38 semi-structured interviews with hunters (n = 9 and sellers (n = 8 of bushmeat and families (n = 21 as consumers of bushmeat killed by lead ammunition. Data were transcribed, translated, and coded for analysis. We conducted content analysis to identify and describe key themes and processes from hunting to consumption. Many hunters (n = 7/9 used lead-based ammunition. After the meat is hunted, market sellers often buy it directly from the hunters. Amongst the hunters and sellers, few (n = 4/17 acknowledged removing the meat impacted by lead shot prior to sale. Many families (n = 15/21 mentioned consumption of the hunted bushmeat. The meat is cooked before sharing with children. Many families (n = 19/21 mentioned they look for the remains of the lead shot or remove the meat impacted by the shot. The finding suggests that hunting, sale, and consumption of bushmeat killed by lead ammunition are well-known practices in Allada, Benin. The bushmeat often hunted illegally with lead shot is sold in the markets and eventually consumed by families who attempt to clean the meat impacted by the lead shot before cooking it.

Chaos and crises in a model for cooperative hunting: a symbolic dynamics approach.

Science.gov (United States)

Duarte, Jorge; Januário, Cristina; Martins, Nuno; Sardanyés, Josep

2009-12-01

In this work we investigate the population dynamics of cooperative hunting extending the McCann and Yodzis model for a three-species food chain system with a predator, a prey, and a resource species. The new model considers that a given fraction sigma of predators cooperates in prey's hunting, while the rest of the population 1-sigma hunts without cooperation. We use the theory of symbolic dynamics to study the topological entropy and the parameter space ordering of the kneading sequences associated with one-dimensional maps that reproduce significant aspects of the dynamics of the species under several degrees of cooperative hunting. Our model also allows us to investigate the so-called deterministic extinction via chaotic crisis and transient chaos in the framework of cooperative hunting. The symbolic sequences allow us to identify a critical boundary in the parameter spaces (K,C(0)) and (K,sigma) which separates two scenarios: (i) all-species coexistence and (ii) predator's extinction via chaotic crisis. We show that the crisis value of the carrying capacity K(c) decreases at increasing sigma, indicating that predator's populations with high degree of cooperative hunting are more sensitive to the chaotic crises. We also show that the control method of Dhamala and Lai [Phys. Rev. E 59, 1646 (1999)] can sustain the chaotic behavior after the crisis for systems with cooperative hunting. We finally analyze and quantify the inner structure of the target regions obtained with this control method for wider parameter values beyond the crisis, showing a power law dependence of the extinction transients on such critical parameters.

A burial with a stamp seal depicting a Bes-like figure from Abusir

Czech Academy of Sciences Publication Activity Database

Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

2015-01-01

Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

Hunting Motifs in Situla Art

Directory of Open Access Journals (Sweden)

Andrej Preložnik

2013-07-01

Full Text Available Situla art developed as an echo of the toreutic style which had spread from the Near East through the Phoenicians, Greeks and Etruscans as far as the Veneti, Raeti, Histri, and their eastern neighbours in the region of Dolenjska (Lower Carniola. An Early Iron Age phenomenon (c. 600—300 BC, it rep- resents the major and most arresting form of the contemporary visual arts in an area stretching from the foot of the Apennines in the south to the Drava and Sava rivers in the east. Indeed, individual pieces have found their way across the Alpine passes and all the way north to the Danube. In the world and art of the situlae, a prominent role is accorded to ani- mals. They are displayed in numerous representations of human activities on artefacts crafted in the classic situla style – that is, between the late 6th  and early 5th centuries BC – as passive participants (e.g. in pageants or in harness or as an active element of the situla narrative. The most typical example of the latter is the hunting scene. Today we know at least four objects decorat- ed exclusively with hunting themes, and a number of situlae and other larger vessels where hunting scenes are embedded in composite narratives. All this suggests a popularity unparallelled by any other genre. Clearly recognisable are various hunting techniques and weapons, each associated with a particu- lar type of game (Fig. 1. The chase of a stag with javelin, horse and hound is depicted on the long- familiar and repeatedly published fibula of Zagorje (Fig. 2. It displays a hound mauling the stag’s back and a hunter on horseback pursuing a hind, her neck already pierced by the javelin. To judge by the (so far unnoticed shaft end un- der the stag’s muzzle, the hunter would have been brandishing a second jave- lin as well, like the warrior of the Vače fibula or the rider of the Nesactium situla, presumably himself a hunter. Many parallels to his motif are known from Greece, Etruria, and

Were human babies used as bait in crocodile hunts in colonial Sri Lanka?

Directory of Open Access Journals (Sweden)

Anslem de Silva

2015-01-01

Full Text Available Use of live animals as bait is not an uncommon practice in hunting worldwide.  However, some curious accounts of the use of human babies as bait to lure crocodiles in sport hunting exist on the island of Sri Lanka, where sport hunting was common during the British colonial period.  Herein we compile the available records, review other records of the practice, and discuss the likelihood of the exercise actually having taken place. 

Quantifying lion (Panthera leo) demographic response following a three-year moratorium on trophy hunting.

Science.gov (United States)

Mweetwa, Thandiwe; Christianson, David; Becker, Matt; Creel, Scott; Rosenblatt, Elias; Merkle, Johnathan; Dröge, Egil; Mwape, Henry; Masonde, Jones; Simpamba, Twakundine

2018-01-01

Factors that limit African lion populations are manifold and well-recognized, but their relative demographic effects remain poorly understood, particularly trophy hunting near protected areas. We identified and monitored 386 individual lions within and around South Luangwa National Park, Zambia, for five years (2008-2012) with trophy hunting and for three additional years (2013-2015) during a hunting moratorium. We used these data with mark-resight models to estimate the effects of hunting on lion survival, recruitment, and abundance. The best survival models, accounting for imperfect detection, revealed strong positive effects of the moratorium, with survival increasing by 17.1 and 14.0 percentage points in subadult and adult males, respectively. Smaller effects on adult female survival and positive effects on cub survival were also detected. The sex-ratio of cubs shifted from unbiased during trophy-hunting to female-biased during the moratorium. Closed mark-recapture models revealed a large increase in lion abundance during the hunting moratorium, from 116 lions in 2012 immediately preceding the moratorium to 209 lions in the last year of the moratorium. More cubs were produced each year of the moratorium than in any year with trophy hunting. Lion demographics shifted from a male-depleted population consisting mostly of adult (≥4 years) females to a younger population with more (>29%) adult males. These data show that the three-year moratorium was effective at growing the Luangwa lion population and increasing the number of adult males. The results suggest that moratoria may be an effective tool for improving the sustainability of lion trophy hunting, particularly where systematic monitoring, conservative quotas, and age-based harvesting are difficult to enforce.

Over, under, or about right: misperceptions of body weight among food stamp participants.

Science.gov (United States)

Ver Ploeg, Michele L; Chang, Hung-Hao; Lin, Biing-Hwan

2008-09-01

The purpose of this research was to investigate the associations between misperception of body weight and sociodemographic factors such as food stamp participation status, income, education, and race/ethnicity. National Health and Nutrition Examination Survey (NHANES) data from 1999-2004 and multivariate logistic regression are used to estimate how sociodemographic factors are associated with (i) the probability that overweight adults misperceive themselves as healthy weight; (ii) the probability that healthy-weight adults misperceive themselves as underweight; and (iii) the probability that healthy-weight adults misperceive themselves as overweight. NHANES data are representative of the US civilian noninstitutionalized population. The analysis included 4,362 men and 4,057 women. BMI derived from measured weight and height was used to classify individuals as healthy weight or overweight. These classifications were compared with self-reported categorical weight status. We find that differences across sociodemographic characteristics in the propensity to underestimate or overestimate weight status were more pronounced for women than for men. Overweight female food stamp participants were more likely to underestimate weight status than income-eligible nonparticipants. Among healthy-weight and overweight women, non-Hispanic black and Mexican-American women, and women with less education were more likely to underestimate actual weight status. We found few differences across sociodemographic characteristics for men. Misperceptions of weight are common among both overweight and healthy-weight individuals and vary across socioeconomic and demographic groups. The nutrition education component of the Food Stamp Program could increase awareness of healthy body weight among participants.

“Redneck, Barbaric, Cashed up Bogan? I Don’t Think So”: Hunting and Nature in Australia

Directory of Open Access Journals (Sweden)

Michael Adams

2013-05-01

Full Text Available Hunting is a controversial activity in Australia, and much debated in international research. Positions range from ‘the first hunters were the first humans’ to the ‘meat is murder’ argument. There is, however, very little research on non-Indigenous hunting in Australia, particularly on the social aspects, but also on biological and ecological issues. In contrast to a general lack of research on non-Indigenous hunting, there is extensive literature on Indigenous hunting. This paper reviews initial research exploring hunting participation and motivation in Australia, as a window into further understanding connections between humans, non-humans and place. My focus is on an analysis of hunting as cultural involvement in nature. Is it a cruel, archaic and redundant practice; or a respectful relationship between and among humans and non- humans which can reorient us to our emerging recombinant ecologies?

The magnitude and selectivity of natural and multiple anthropogenic mortality causes in hunted brown bears.

Science.gov (United States)

Bischof, Richard; Swenson, Jon E; Yoccoz, Nigel G; Mysterud, Atle; Gimenez, Olivier

2009-05-01

1. The population dynamic and evolutionary effects of harvesting are receiving growing attention among biologists. Cause-specific estimates of mortality are necessary to determine and compare the magnitude and selectivity of hunting and other types of mortalities. In addition to the logistic and financial constraints on longitudinal studies, they are complicated by the fact that nonhunting mortality in managed populations usually consists of a mix of natural and human-caused factors. 2. We used multistate capture-recapture (MCR) models to estimate cause-specific survival of brown bears (Ursus arctos) in two subpopulations in Sweden over a 23-year period. In our analysis, we distinguished between legal hunting and other sources of mortality, such as intraspecific predation, accidents, poaching, and damage control removals. We also tested whether a strong increase in harvest quotas after 1997 in one of the subpopulations affected vulnerability to legal hunting. 3. Although only a fraction of mortalities other than legal hunting could be considered natural, this group of causes showed a general pattern of demographic selectivity expected from natural mortality regimes in populations of long-lived species, namely greater vulnerability of young animals. On the other hand, demographic effects on hunting vulnerability were weak and inconsistent. Our findings support the assumption that hunting and other mortalities were additive. 4. As expected, an increase in hunting pressure coincided with a correspondingly large increase in vulnerability to hunting in the affected subpopulation. Because even unbiased harvest can lead to selective pressures on life-history traits, such as size at primiparity, increasing harvest quotas may not only affect population growth directly, but could also alter optimal life-history strategies in brown bears and other carnivores. 5. Legal hunting is the most conveniently assessed and the most easily managed cause of mortality in many wild

Mammal Hunting in the Special Use Zone and Buffer Tingo Maria National Park, Huánuco, Peru

Directory of Open Access Journals (Sweden)

Fiorella Nasha Gonzales Guillén

2014-12-01

Full Text Available Between the months of August to November 2011 were conducted 42 semi-structured interviews to assess the hunting of mammals in areas of special purpose (ZUE and buffer (ZA National Park Tingo María surveys. The results indicate that 43% of the population practiced hunting as a secondary activity, the main smallholder agriculture. The methodology used for hunting are the "tramperas" while the hunting is often 2-3 times a month. Hunting is more common after the wet season, it is selective and responds to the taste of meat that an economic need. Among the most hunted mammals include agouti Dasyprocta sp. and picuro Cuniculus paca, while animals higher biomass as the peccary Pecari tajacu are rare in the area, so it is recommended to increase the control of hunting of vulnerable species in the villages which are inside and in the vicinity of the Park.

Surrogate hosts: Hunting dogs and recolonizing grey wolves share their endoparasites

Directory of Open Access Journals (Sweden)

Ines Lesniak

2017-12-01

Full Text Available Understanding how closely related wildlife species and their domesticated counterparts exchange or share parasites, or replace each other in parasite life cycles, is of great interest to veterinary and human public health, and wildlife ecology. Grey wolves (Canis lupus host and spread endoparasites that can either directly infect canid conspecifics or their prey serving as intermediate hosts of indirectly transmitted species. The wolf recolonization of Central Europe represents an opportunity to study parasite transmission dynamics between wildlife and domestic species for cases when a definitive host returns after local extinction – a situation equivalent to a ‘removal experiment’.Here we investigate whether the re–appearance of wolves has increased parasite pressure on hunting dogs – a group of companion animals of particular interest as they have a similar diet to wolves and flush wolf habitats when hunting. We compared prevalence (P and species richness (SR of helminths and the protozoan Sarcocystis to determine whether they were higher in hunting dogs from wolf areas (ndogs = 49 than a control area (ndogs = 29 without wolves. Of particular interest were S. grueneri and S. taeniata, known as ‘wolf specialists’.Five helminth and 11 Sarcocystis species were identified, of which all helminths and eight Sarcocystis species were shared between dogs and wolves. Overall prevalence and species richness of helminths (P:38.5% vs. 24.1%; SRmean:0.4 vs. 0.3 species and Sarcocystis (P:63.3% vs. 65.5%, SRmean:2.1 vs. 1.8 species did not differ between study sites. However, hunting dogs were significantly more likely to be infected with S. grueneri in wolf areas (P:45.2% vs. 10.5%; p = 0.035. The findings suggest that wolves indirectly increase S. grueneri infection risk for hunting dogs since cervids are intermediate hosts and occasionally fed to dogs. Furthermore, a periodic anthelminthic treatment of hunting dogs may be an

The hunt for axions

International Nuclear Information System (INIS)

Ringwald, Andreas

2015-06-01

Many theoretically well-motivated extensions of the Standard Model of particle physics predict the existence of the axion and further ultralight axion-like particles. They may constitute the mysterious dark matter in the universe and solve some puzzles in stellar and high-energy astrophysics. There are new, relatively small experiments around the globe, which started to hunt for these elusive particles and complement the accelerator based search for physics beyond the Standard Model.

The hunt for axions

Energy Technology Data Exchange (ETDEWEB)

Ringwald, Andreas

2015-06-15

Many theoretically well-motivated extensions of the Standard Model of particle physics predict the existence of the axion and further ultralight axion-like particles. They may constitute the mysterious dark matter in the universe and solve some puzzles in stellar and high-energy astrophysics. There are new, relatively small experiments around the globe, which started to hunt for these elusive particles and complement the accelerator based search for physics beyond the Standard Model.

The significance of African lions for the financial viability of trophy hunting and the maintenance of wild land.

Science.gov (United States)

Lindsey, Peter Andrew; Balme, Guy Andrew; Booth, Vernon Richard; Midlane, Neil

2012-01-01

Recent studies indicate that trophy hunting is impacting negatively on some lion populations, notably in Tanzania. In 2004 there was a proposal to list lions on CITES Appendix I and in 2011 animal-welfare groups petitioned the United States government to list lions as endangered under their Endangered Species Act. Such listings would likely curtail the trophy hunting of lions by limiting the import of lion trophies. Concurrent efforts are underway to encourage the European Union to ban lion trophy imports. We assessed the significance of lions to the financial viability of trophy hunting across five countries to help determine the financial impact and advisability of the proposed trade restrictions. Lion hunts attract the highest mean prices (US$24,000-US$71,000) of all trophy species. Lions generate 5-17% of gross trophy hunting income on national levels, the proportional significance highest in Mozambique, Tanzania, and Zambia. If lion hunting was effectively precluded, trophy hunting could potentially become financially unviable across at least 59,538 km(2) that could result in a concomitant loss of habitat. However, the loss of lion hunting could have other potentially broader negative impacts including reduction of competitiveness of wildlife-based land uses relative to ecologically unfavourable alternatives. Restrictions on lion hunting may also reduce tolerance for the species among communities where local people benefit from trophy hunting, and may reduce funds available for anti-poaching. If lion off-takes were reduced to recommended maximums (0.5/1000 km(2)), the loss of viability and reduction in profitability would be much lower than if lion hunting was stopped altogether (7,005 km(2)). We recommend that interventions focus on reducing off-takes to sustainable levels, implementing age-based regulations and improving governance of trophy hunting. Such measures could ensure sustainability, while retaining incentives for the conservation of lions and their

Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

Science.gov (United States)

Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

2017-09-01

The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

Walk-In Hunting Access (WIHA) Fall 2011

Data.gov (United States)

Kansas Data Access and Support Center — This shapefile represents the private lands leased by the Kansas Department of Wildlife, Parks and Tourism (KDWPT) for fall 2011 public hunting access through the...

Synchrony in hunting bags: reaction on climatic and human induced changes?

Science.gov (United States)

Hagen, Robert; Heurich, Marco; Kröschel, Max; Herdtfelder, Micha

2014-01-15

Human induced land use changes negatively impact the viability of many wildlife species through habitat modifications and mortality, while some species seem to benefit from it. Roe deer (Capreolus capreolus), a wide spread ungulate increased both its abundance and range throughout Europe. This pattern is also reflected in the increasing hunting bags over the last 40 years. Such a development raises questions about the relationship between human hunting and population dynamics and, in particular, about the potential of human hunting to control related populations. We analysed and reconstructed annual hunting bags of roe deer for three federal states of northern Germany, Brandenburg, Lower Saxony and Mecklenburg West Pomerania for the years 1972 to 2011. Since 1992 the hunting bags from these three states are significantly higher than those reported for the years 1972-1991. Our reconstruction takes into consideration effects of climate variability, expressed by inter-annual changes in the North Atlantic Oscillation and impacts from rapeseed and wheat cultivation. We found that severe winters, which are indicated by negative values of the North Atlantic Oscillation during the months December-March, directly, or with a time lag of two years affect the number of deer shot. In contrast, an increase in the area used for rapeseed cultivation coincides with higher numbers of roe deer shot, with respect to the overall mean value. Consequently, we recommend that wildlife management addresses changes in large scale processes including land use pattern and climate variability. © 2013.

Prevalence of intestinal parasites in shelter and hunting dogs in Catalonia, Northeastern Spain.

Science.gov (United States)

Ortuño, Anna; Scorza, Valeria; Castellà, Joaquim; Lappin, Mike

2014-03-01

To compare the prevalence of intestinal parasites in shelter and hunting dogs in Catalonia, Northeastern Spain, fresh faecal samples from 81 shelter dogs and 88 hunting dogs were collected and analysed by faecal flotation. The overall prevalence of intestinal parasites was 71.6% in each population. In the shelter dog group, 67.9% of dogs were positive for intestinal protozoa and 9.8% were positive for helminths. In the hunting dog group, 20.4% of dogs were positive for intestinal protozoa and 63.6% were positive for helminths. A subset of Giardia-positive samples was evaluated by PCR; Giardia assemblages C or D were detected. These results suggest that comprehensive parasite control measures should be implemented in both shelter and hunting dogs in Catalonia. Copyright © 2013 Elsevier Ltd. All rights reserved.

Seasonal biotic and abiotic factors affecting hunting strategy in free-living Saharan sand vipers, Cerastes vipera.

Science.gov (United States)

Horesh, Sefi J A; Sivan, Jaim; Rosenstrauch, Avi; Tesler, Itay; Degen, A Allan; Kam, Michael

2017-02-01

Sit-and-wait ambushing and active hunting are two strategies used by predators to capture prey. In snakes, hunting strategy is conserved phylogenetically; most species employ only one strategy. Active hunters encounter and capture more prey but invest more energy in hunting and have higher risks of being predated. This trade-off is important to small predators. The small Cerastes vipera employs both modes of hunting, which is unlike most viperids which use only sit-and wait ambushing. This species hibernates in October and emerges in April. Energy intake should be high prior to hibernation to overcome the non-feeding hibernation period and for reproduction on their emergence. We predicted that more individuals would hunt actively towards hibernation and an abiotic factor would trigger this response. Furthermore, since more energy is required for active hunting, we predicted that snakes in good body condition would use active hunting to a greater extent than snakes in poor body condition. To test our predictions, we tracked free-living snakes year round and determined their hunting strategy, estimated their body condition index (BCI), and calculated circannual parameters of day length as environmental cues known to affect animal behaviour. Two novel findings emerged in this study, namely, hunting strategy was affected significantly by 1) the circannual change in day length and 2) by BCI. The proportion of active hunters increased from 5% in April to over 30% in October and BCI of active foragers was higher than that of sit-and-wait foragers and, therefore, our predictions were supported. The entrainment between the proportion of active hunting and the abiotic factor is indicative of an adaptive function for choosing a hunting strategy. A trend was evident among life stages. When all life stages were present (September-October), the proportion of active foragers increased with age: 0.0% among neonates, 18.2% among juveniles and 31.4% among adults. We concluded that

Differential wolf-pack-size persistence and the role of risk when hunting dangerous prey

Science.gov (United States)

Barber-Meyer, Shannon M.; Mech, L. David; Newton, Wesley E.; Borg, Bridget

2016-01-01

Risk to predators hunting dangerous prey is an emerging area of research and could account for possible persistent differences in gray wolf (Canis lupus) pack sizes. We documented significant differences in long-term wolf-pack-size averages and variation in the Superior National Forest (SNF), Denali National Park and Preserve, Yellowstone National Park, and Yukon, Canada (pwolves’ risk when hunting primary prey, for those packs (N=3) hunting moose (Alces americanus) were significantly larger than those (N=10) hunting white-tailed deer (Odocoileus virginianus) (F1,8=16.50, p=0.004). Our data support the hypothesis that differential pack-size persistence may be perpetuated by differences in primary prey riskiness to wolves, and we highlight two important extensions of this idea: (1) the potential for wolves to provision and defend injured packmates from other wolves and (2) the importance of less-risky, buffer prey to pack-size persistence and year-to-year variation. Risk to predators hunting dangerous prey is an emerging area of research and could account for possible persistent differences in gray wolf (Canis lupus) pack sizes. We documented significant differences in long-term wolf-pack-size averages and variation in the Superior National Forest (SNF), Denali National Park and Preserve, Yellowstone National Park, and Yukon, Canada (pwolves’ risk when hunting primary prey, for those packs (N=3) hunting moose (Alces americanus) were significantly larger than those (N=10) hunting white-tailed deer (Odocoileus virginianus) (F1,8=16.50, p=0.004). Our data support the hypothesis that differential pack-size persistence may be perpetuated by differences in primary prey riskiness to wolves, and we highlight two important extensions of this idea: (1) the potential for wolves to provision and defend injured packmates from other wolves and (2) the importance of less-risky, buffer prey to pack-size persistence and year-to-year variation.

Wildlife reserves, populations and hunting outcome with smart wildlife

DEFF Research Database (Denmark)

Jensen, Frank; Jacobsen, Jette Bredahl; Thorsen, Bo Jellesmark

2014-01-01

reach ambiguous results when comparing a situation with and without stress effects. A pure stress effect implies that the population level in a wildlife reserve increase and the population level in the hunting area decrease in optimum. However, this change in optimal population levels increase migration...... from the wildlife reserve to the hunting area in the social optimum. The total effect is, therefore, ambiguous. For the private optimum open-access is assumed and exactly the same results arise as in the social optimum when comparing a situation with and without stress effects....

Chronic Granulomatous Tolosa-Hunt Syndrome (Case Report

Directory of Open Access Journals (Sweden)

Dewa Purwa Samatra

2016-04-01

Full Text Available Background: Tolosa-Hunt syndrome is a rare case, characterized by tenderness, persistent around the affected eye and ophthalmoplegia /paresis caused by granulomatous inflammation in the cavernous sinus region, supra orbital or orbital fissure. Although spontaneous remission may occur, even corticosteroid therapy has a very satisfactory effect. However, relapse can occur after remission. We report a case of granulomatous Tolosa-Hunt syndrome in women aged 47 years who suffer from recurrent Tolosa-Hunt syndrome attacks for 4 years on his left eye, there was a significant recovery after receiving steroid therapy. Case:  We report A 47 years old with recurrent pain in the left eye since 4 years, pain episode duration of 1-2 weeks, accompanied by double vision when having long or short distance viewing, and when climbing stairs. The patient left eye was protruded with blurred vision and difficulty in distinguishing green color. Left eye examination vision 1/300, green color discromatopsia, normal funduscopic, ptosis, with paresis eye movement toward the superior, inferior, nasal and temporal. C-reactive protein and erythrocyte sedimentation rate were slightly elevated. ANA test was positive. In visual evoked potential, it showed latency elongation of the left face. Head MRI with contrast showed a isointense protrusion on the left cavernous sinus in axial cuts in T1 and T2. Head MRI T1 with contrast on coronal, axial cuts showed the appearance of convex lesions around the left cavernous sinus that enhanced with contrast. Conclusions: The result was clinically and radiographically diagnosed as Tolosa-Hunt Syndrome (THS. Therefore, 10 mg dexamethasone therapy, 4 times a day for 3 days was lowered to three times on day 4, 2 times on the fifth day and one time at day 6. The patient showed clinical improvement. The patient continued 48 mg oral methylprednisolone therapy up to 3 weeks which then gradually decreased and planned head MRI 3 months later.

Climate change and the increasing impact of polar bears on bird populations

Directory of Open Access Journals (Sweden)

Jouke eProp

2015-03-01

Full Text Available The Arctic is becoming warmer at a high rate, and contractions in the extent of sea ice are currently changing the habitats of marine top-predators dependent on ice. Polar bears (Ursus maritimus depend on sea ice for hunting seals. For these top-predators, longer ice-free seasons are hypothesized to force the bears to hunt for alternative terrestrial food, such as eggs from colonial breeding birds. We analyzed time-series of polar bear observations at four locations on Spitsbergen (Svalbard and one in east Greenland. Summer occurrence of polar bears, measured as the probability of encountering bears and the number of days with bear presence, has increased significantly from the 1970/80s to the present. The shifts in polar bear occurrence coincided with trends for shorter sea ice seasons and less sea ice during the spring in the study area. This resulted in a strong inverse relationship between the probability of bear encounters on land and the length of the sea ice season. Within ten years after their first appearance on land, polar bears had advanced their arrival dates by almost 30 days. Direct observations of nest predation showed that polar bears may severely affect reproductive success of the barnacle goose (Branta leucopsis, common eider (Somateria mollissima and glaucous gull (Larus hyperboreus. Nest predation was strongest in years when the polar bears arrived well before hatch, with more than 90% of all nests being predated. The results are similar to findings from Canada, and large-scale processes, such as climate and subsequent habitat changes, are pinpointed as the most likely drivers in various parts of the Arctic. We suggest that the increasing, earlier appearance of bears on land in summer reflects behavioral adaptations by a small segment of the population to cope with a reduced hunting range on sea ice. This exemplifies how behavioral adaptations may contribute to the cascading effects of climate change.

Varicella-Zoster Virus and Ramsay Hunt Syndrome

OpenAIRE

J Gordon Millichap

2000-01-01

Fifty two children, aged 2 to 15 years, diagnosed with Ramsay Hunt syndrome (RHS) in a 20 year period between 1976 and 1996 are reported from the Facial Nerve Clinic, Ehime University Hospital, Japan.

Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

Science.gov (United States)

Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

2002-01-01

The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

Geo-spatial aspects of acceptance of illegal hunting of large carnivores in Scandinavia.

Science.gov (United States)

Gangaas, Kristin E; Kaltenborn, Bjørn P; Andreassen, Harry P

2013-01-01

Human-carnivore conflicts are complex and are influenced by: the spatial distribution of the conflict species; the organisation and intensity of management measures such as zoning; historical experience with wildlife; land use patterns; and local cultural traditions. We have used a geographically stratified sampling of social values and attitudes to provide a novel perspective to the human - wildlife conflict. We have focused on acceptance by and disagreements between residents (measured as Potential Conflict Index; PCI) towards illegal hunting of four species of large carnivores (bear, lynx, wolf, wolverine). The study is based on surveys of residents in every municipality in Sweden and Norway who were asked their opinion on illegal hunting. Our results show how certain social values are associated with acceptance of poaching, and how these values differ geographically independent of carnivore abundance. Our approach differs from traditional survey designs, which are often biased towards urban areas. Although these traditional designs intend to be representative of a region (i.e. a random sample from a country), they tend to receive relatively few respondents from rural areas that experience the majority of conflict with carnivores. Acceptance of poaching differed significantly between Norway (12.7-15.7% of respondents) and Sweden (3.3-4.1% of respondents). We found the highest acceptance of illegal hunting in rural areas with free-ranging sheep and strong hunting traditions. Disagreements between residents (as measured by PCI) were highest in areas with intermediate population density. There was no correlation between carnivore density and either acceptance of illegal hunting or PCI. A strong positive correlation between acceptance of illegal hunting and PCI showed that areas with high acceptance of illegal hunting are areas with high potential conflict between people. Our results show that spatially-stratified surveys are required to reveal the large scale

Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

International Nuclear Information System (INIS)

Veit, R.; Kolleck, R.; Hofmann, H.; Sikora, S.

2011-01-01

Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating.In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

Vestibular Restoration and Adaptation in Vestibular Neuritis and Ramsay Hunt Syndrome With Vertigo.

Science.gov (United States)

Martin-Sanz, Eduardo; Rueda, Almudena; Esteban-Sanchez, Jonathan; Yanes, Joaquin; Rey-Martinez, Jorge; Sanz-Fernandez, Ricardo

2017-08-01

To evaluate vestibular restoration and the evolution of the compensatory saccades in acute severe inflammatory vestibular nerve paralysis, including vestibular neuritis and Ramsay Hunt syndrome with vertigo. Prospective. Tertiary referral center. Vestibular neuritis (n = 18) and Ramsay Hunt syndrome patients with vertigo (n = 13) were enrolled. After treatment with oral corticosteroids, patients were followed up for 6 months. Functional recovery of the facial nerve was scored according to the House-Brackman grading system. Caloric and video head impulse tests were performed in every patient at the time of enrolment. Subsequently, successive video head impulse test (vHIT) exploration was performed at the 1, 3, and 6-month follow-up. Eighteen patients with vestibular neuritis and 13 with Ramsay Hunt syndrome and associated vertigo were included. Vestibular function was significantly worse in patients with Ramsay Hunt syndrome than in those with vestibular neuritis. Similar compensatory saccades velocity and latency values were observed in both groups, in both the caloric and initial vHIT tests. Successive vHIT results showed a significantly higher vestibulo-ocular reflex gain recovery in vestibular neuritis patients than in Ramsay Hunt syndrome patients. A significantly faster reduction in the latency, velocity, and organization of the compensatory saccades was observed in neuritis than in Ramsay Hunt syndrome patients. In addition to the recovery of the vestibulo-ocular reflex, the reduction of latency, velocity and the organization of compensatory saccades play a role in vestibular compensation.

Studies on the finite element simulation in sheet metal stamping processes

Science.gov (United States)

Huang, Ying

The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

Sexual dimorphism in relation to big-game hunting and economy in modern human populations.

Science.gov (United States)

Collier, S

1993-08-01

Postcranial skeletal data from two recent Eskimo populations are used to test David Frayer's model of sexual dimorphism reduction in Europe between the Upper Paleolithic and Mesolithic. Frayer argued that a change from big-game hunting and adoption of new technology in the Mesolithic reduced selection for large body size in males and led to a reduction in skeletal sexual dimorphism. Though aspects of Frayer's work have been criticized in the literature, the association of big-game hunting and high sexual dimorphism is untested. This study employs univariate and multivariate analysis to test that association by examining sexual dimorphism of cranial and postcranial bones of two recent Alaskan Eskimo populations, one being big-game (whale and other large marine mammal) hunting people, and the second being salmon fishing, riverine people. While big-game hunting influences skeletal robusticity, it cannot be said to lead to greater sexual dimorphism generally. The two populations had different relative sexual dimorphism levels for different parts of the body. Notably, the big-game hunting (whaling) Eskimos had the lower multivariate dimorphism in the humerus, which could be expected to be the structure under greatest exertion by such hunting in males. While the exertions of the whale hunting economic activities led to high skeletal robusticity, as predicted by Frayer's model, this was true of the females as well as the males, resulting in low sexual dimorphism in some features. Females are half the sexual dimorphism equation, and they cannot be seen as constants in any model of economic behavior.

An allometric approach to quantify the extinction vulnerability of birds and mammals.

Science.gov (United States)

Hilbers, J P; Schipper, A M; Hendriks, A J; Verones, F; Pereira, H M; Huijbregts, M A J

2016-03-01

Methods to quantify the vulnerability of species to extinction are typically limited by the availability of species-specific input data pertaining to life-history characteristics and population dynamics. This lack of data hampers global biodiversity assessments and conservation planning. Here, we developed a new framework that systematically quantifies extinction risk based on allometric relationships between various wildlife demographic parameters and body size. These allometric relationships have a solid theoretical and ecological foundation. Extinction risk indicators included are (1) the probability of extinction, (2) the mean time to extinction, and (3) the critical patch size. We applied our framework to assess the global extinction vulnerability of terrestrial carnivorous and non-carnivorous birds and mammals. Irrespective of the indicator used, large-bodied species were found to be more vulnerable to extinction than their smaller counterparts. The patterns with body size were confirmed for all species groups by a comparison with IUCN data on the proportion of extant threatened species: the models correctly predicted a multimodal distribution with body size for carnivorous birds and a monotonic distribution for mammals and non-carnivorous birds. Carnivorous mammals were found to have higher extinction risks than non-carnivores, while birds were more prone to extinction than mammals. These results are explained by the allometric relationships, predicting the vulnerable species groups to have lower intrinsic population growth rates, smaller population sizes, lower carrying capacities, or larger dispersal distances, which, in turn, increase the importance of losses due to environmental stochastic effects and dispersal activities. Our study is the first to integrate population viability analysis and allometry into a novel, process-based framework that is able to quantify extinction risk of a large number of species without requiring data-intensive, species

The bird species of Kumasir lake (Kahramanmaras-Turkey) and a view of environmental ethics on sustainable wetland management.

Science.gov (United States)

Inac, S; Gorucu, O; Pinar, A H

2008-05-01

Kumasir lake is located next to towns of Donuklu and Fatih, nine km west of Kahramanmaras city center the region of east Mediterranean, Turkey This lake is of crucial importance from the point of native and immigrant birds. We located 17 birdspecies in this area during our observations carried out in the spring and autumn of 2005-2006. These were Ciconia ciconia L., Anas platyrhynchos L., Accipiter nisus L., Accipiter brevipes L., Fulica atra L., Columba palumbus L., Merops apiaster L., Upupa epops L., Alauda arvensis L., Motacilla flava L., Turdus merula L., Acrocephalus scirpaceus L., Regulus regulus L., Garrulus glandarius L., Corvus corax L., Fringilla coelebs L., Hirundo rustica L.. Among observed 17 species; 6 of them were immigrant and remaining 11 of them were native birds. Kumasir lake is surrounded by wetland of Amik and Gavur lake. Since it was greatly dried, it was transformed to farmland. Consequently the birds lost most of theirnests and settlements. However not taken in the care of environmental ethic values, the wastewaters of the villages drain to lake reservoir; herbicides and insecticides used for agriculture are polluting the water reeds have been burned, the lake's reeds are getting dry by the irrigation for the farmland. So, the wetland ecosystem is being affected negatively by these factors. On the other hand, the birds are exposed to illegal and unlawful hunting. For this reasons, this lake must be taken into a management regime of sustainable wetland (protection profiting balance) and used techniques of participation planning via the process of sustainable natural resources and planning.

Oil and gas development influences big-game hunting in Wyoming

Science.gov (United States)

Dorning, Monica; Garman, Steven L.; Diffendorfer, James E.; Semmens, Darius J.; Hawbaker, Todd J.; Bagstad, Kenneth J.

2017-01-01

Development from extracting oil and gas resources can have unintended effects on multiple ecosystem functions, with cascading effects on wildlife, ecosystem services, and local economies. Big-game hunting opportunities may be closely related to these effects, but empirical analyses of impacts of energy development on hunting are limited. We examined the influence of oil and gas development density on harvest efficiency, or harvest per unit of hunter effort, within all hunt areas in Wyoming, USA, from 2008 to 2014 for 3 big-game species: elk (Cervus canadensis), mule deer (Odocoileus hemionus), and pronghorn (Antilocapra americana). Using harvest/hunter day as the response variable, we compared linear mixed-effects models for each species that included total well density (i.e., all wells constructed up to the year of record), active well density (i.e., only those wells currently producing oil or gas in that year), or neither as a predictor variable. We used well densities as indicators of development in the absence of data specifying the locations of other oil and gas infrastructure (e.g., roads, well pads). Models also accounted for the fixed effects of road density, hunter density, proportion of the area that is public land with unrestricted hunter access, proportion of the area that is forested, year of observation, and random effects of variation among hunt areas nested within associated game herd units. Presence of oil and gas wells had a positive influence on harvest efficiency for elk and mule deer. Although there was no overall effect to pronghorn, there was a negative influence of wells on juvenile pronghorn harvest efficiency. Changes in harvest efficiency due to expanding oil and gas development could alter the time spent hunting by hunters and their chances of harvesting an animal. This could have subsequent impacts on hunter satisfaction, game populations, and economic revenue generated from recreational hunters.

Ramsay Hunt syndrome in a child – case report

Directory of Open Access Journals (Sweden)

Joanna Grabowska

2016-12-01

Full Text Available Introduction. Ramsay Hunt syndrome is a rare disease characterized by complications of herpes zoster oticus. This syndrome is defined by characteristic skin lesions with paresis of the facial and/or vestibulocochlear nerve. Objective. To present a case of a 14-year-old child with Ramsay Hunt syndrome. Case report . A 14-year-old patient was admitted to the Department of Dermatology due to vesicular lesions in the left auricular region. On medical examination, insufficiency of the left eyelid, asymmetry of the facial lines, drooping of the left corner of the mouth, and smoothing of the forehead were observed. According to the House-Brackmann scale, the patient had paresis (grade IV of the facial nerve. The patient was treated with intravenous acyclovir, antibiotics and anti-inflammatory drugs. Supplementation with vitamin B and rehabilitation procedures were also introduced. Conclusions . Ramsay Hunt syndrome is very rare in the pediatric population. It requires interdisciplinary cooperation between doctors. The presented case confirms the validity of therapy with acyclovir and prednisone and rehabilitation.

The significance of African lions for the financial viability of trophy hunting and the maintenance of wild land.

Directory of Open Access Journals (Sweden)

Peter Andrew Lindsey

Full Text Available Recent studies indicate that trophy hunting is impacting negatively on some lion populations, notably in Tanzania. In 2004 there was a proposal to list lions on CITES Appendix I and in 2011 animal-welfare groups petitioned the United States government to list lions as endangered under their Endangered Species Act. Such listings would likely curtail the trophy hunting of lions by limiting the import of lion trophies. Concurrent efforts are underway to encourage the European Union to ban lion trophy imports. We assessed the significance of lions to the financial viability of trophy hunting across five countries to help determine the financial impact and advisability of the proposed trade restrictions. Lion hunts attract the highest mean prices (US$24,000-US$71,000 of all trophy species. Lions generate 5-17% of gross trophy hunting income on national levels, the proportional significance highest in Mozambique, Tanzania, and Zambia. If lion hunting was effectively precluded, trophy hunting could potentially become financially unviable across at least 59,538 km(2 that could result in a concomitant loss of habitat. However, the loss of lion hunting could have other potentially broader negative impacts including reduction of competitiveness of wildlife-based land uses relative to ecologically unfavourable alternatives. Restrictions on lion hunting may also reduce tolerance for the species among communities where local people benefit from trophy hunting, and may reduce funds available for anti-poaching. If lion off-takes were reduced to recommended maximums (0.5/1000 km(2, the loss of viability and reduction in profitability would be much lower than if lion hunting was stopped altogether (7,005 km(2. We recommend that interventions focus on reducing off-takes to sustainable levels, implementing age-based regulations and improving governance of trophy hunting. Such measures could ensure sustainability, while retaining incentives for the conservation of

Toward a new understanding of the links between poverty and illegal wildlife hunting

NARCIS (Netherlands)

Duffy, Rosaleen; St John, Freya A.V.; Büscher, Bram; Brockington, Dan

2016-01-01

Conservation organizations have increasingly raised concerns about escalating rates of illegal hunting and trade in wildlife. Previous studies have concluded that people hunt illegally because they are financially poor or lack alternative livelihood strategies. However, there has been little

Hunting The Ghost Gun: An Analysis Of The U.S. Army Infantry Rifle

Science.gov (United States)

2016-03-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA JOINT APPLIED PROJECT HUNTING THE GHOST GUN : AN ANALYSIS OF THE U.S. ARMY......LEFT BLANK iii Approved for public release; distribution is unlimited HUNTING THE GHOST GUN : AN ANALYSIS OF THE U.S. ARMY INFANTRY

Hunting the Shadow, Catching the Light

DEFF Research Database (Denmark)

Toft, Anne Elisabeth; Nielsen, Torben

2009-01-01

From 28 October to 6 November 2009 twenty-one 3rd year students in interior design from Central Academy of Fine Arts (CAFA), School of Architecture, Beijing participated in the workshop Hunting the Shadow - Catching the Light. The workshop was conceived and led by the Danish architects Torben Nie...

Guam and the Northern Mariana Islands ESI: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for pelagic birds, shorebirds, wading birds, waterfowl, gulls, terns, and passerine birds in Guam and the...

HABITAT DAN PERILAKU ELANG JAWA (Nisaetus bartelsi DI SPTN 1 TEGALDLIMO TAMAN NASIONAL ALAS PURWO, JAWA TIMUR

Directory of Open Access Journals (Sweden)

Desy Natalia Sitorus

2017-05-01

Full Text Available Javan Hawk-eagle (Nisaetus bartelsi considered as endangered species by IUCN redlist 2015 and protected species by Government Regulation No.7/1999. Alas Purwo National Park (APNP is a conservation area and its one of the natural habitat of Javan Hawk-eagle distribution (endemic species of java. The study was aimed to analysis its habitat and the behavior. Purposive sampling was used on focused observation area base on direct contex with the bird. The habitat analysis was approach with vagetation analysis dan habitat used method. Focal animal sampling used as approach describe to know the daily activities. The result showed that the bird used of natural lowland forest as main habitat and the bird distibute as equal (focused at natural lowland forest. Characteristic of sheltering site of the bird using tree in A strata and B strata, which have horizontal and strong enough branch. The javan hawk-eagle choising at emergent tree for the nesting site, with characteristic of emergent tree, with crown not so dense of the leaf and the position of the tree close to hunting area. Characteristic of hunting areas of the bird is natural lowland forest with diverse and abundant of preys. The bird like preys on mammals such as giant squirrel and bird such as red jungle fowl. The behavior was most often observed was resting in natural lowland forest with five times encounter (58,06%. But the bird also done activities of preening and observing surrounding to focus on seaching food. Hunting activity was observed used perch hunting in natural low land forest in APNP. Keywords: APNP, habitat, javan hawk-eagle

Large carnivores response to recreational big game hunting along the Yellowstone National Park and Absaroka-Beartooth Wilderness boundary

Science.gov (United States)

Ruth, T.E.; Smith, D.W.; Haroldson, M.A.; Buotte, P.C.; Schwartz, C.C.; Quigley, H.B.; Cherry, S.; Tyres, D.; Frey, K.

2003-01-01

The Greater Yellowstone Ecosystem contains the rare combination of an intact guild of native large carnivores, their prey, and differing land management policies (National Park versus National Forest; no hunting versus hunting). Concurrent field studies on large carnivores allowed us to investigate activities of humans and carnivores on Yellowstone National Park's (YNP) northern boundary. Prior to and during the backcountry big-game hunting season, we monitored movements of grizzly bears (Ursus arctos), wolves (Canis lupus), and cougars (Puma concolor) on the northern boundary of YNP. Daily aerial telemetry locations (September 1999), augmented with weekly telemetry locations (August and October 1999), were obtained for 3 grizzly bears, 7 wolves in 2 groups of 1 pack, and 3 cougars in 1 family group. Grizzly bears were more likely located inside the YNP boundary during the pre-hunt period and north of the boundary once hunting began. The cougar family tended to be found outside YNP during the pre-hunt period and moved inside YNP when hunting began. Wolves did not significantly change their movement patterns during the pre-hunt and hunting periods. Qualitative information on elk (Cervus elaphus) indicated they moved into YNP once hunting started, suggesting that cougars followed living prey or responded to hunting activity, grizzly bears focused on dead prey (e.g., gut piles, crippled elk), and wolves may have taken advantage of both. Measures of association (Jacob's Index) were positive within carnivore species but inconclusive among species. Further collaborative research and the use of new technologies such as Global Positioning System (GPS) telemetry collars will advance our ability to understand these species, the carnivore community and its interactions, and human influences on carnivores.

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-04-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-06-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Cross-jurisdictional management of a trophy-hunted species.

Science.gov (United States)

Hochard, Jacob; Finnoff, David

2017-05-07

Gray wolves (Canis lupus) are managed for competing uses in the Greater Yellowstone Ecosystem (GYE). Tourism benefits Yellowstone National Park (YNP) visitors while trophy hunting benefits hunters outside of the park. We investigate the policy scope of gray wolf management across jurisdictional boundaries by incorporating three foundations of the behavioral ecology of wolves: refuge-seeking behavior, optimal foraging group size and territoriality. Tradeoffs between and within consumptive and non-consumptive human benefits and wolf population fitness and life history indicators are quantified as a set of elasticities, providing clear implications to resource managers. Our approach highlights that hunting intensity affects the provision of consumptive and non-consumptive human benefits across jurisdictional boundaries and ought to be managed accordingly. We also show that population levels are an incomplete indicator of species fitness, which may depend on how hunting policies impact underlying group ecology. Our findings suggest traditional optimization approaches to wildlife management may lead to suboptimal policy recommendations when the boundaries on the natural system are oversimplified. Highlighting the human element of wildlife management, we show that understanding tourist and hunter responses to wildlife population abundances is critical to balancing provision of consumptive and non-consumptive human uses. Copyright © 2017 Elsevier Ltd. All rights reserved.

Rhode Island, Connecticut, New York, and New Jersey ESI: BIRDS (Bird Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for wading birds, shorebirds, waterfowl, raptors, diving birds, pelagic birds, passerine birds, gulls and...

Multiple-host pathogens in domestic hunting dogs in Nicaragua's Bosawás Biosphere Reserve.

Science.gov (United States)

Fiorello, Christine V; Straub, Mary H; Schwartz, Laura M; Liu, James; Campbell, Amanda; Kownacki, Alexa K; Foley, Janet E

2017-03-01

Nicaragua's Bosawás Biosphere Reserve is a vast forested area inhabited largely by indigenous Mayangna and Miskitu people. Most Bosawás residents rely on subsistence hunting and swidden agriculture, and hunting dogs are important for finding and securing wild game. We investigated the health of hunting dogs in three communities differing in location, size, and economy. Dogs in all communities were nutritionally compromised and experienced a heavy burden of disease. Seroprevalence of canine distemper, canine parvovirus, Rickettsia rickettsii, and Leptospira spp. exceeded 50% of dogs. At least one dog was actively shedding leptospires in urine, and many dogs were anemic and/or dehydrated. These dogs interact with wildlife in the forest and humans and domestic livestock in the communities, and may therefore serve as sources of zoonotic and wildlife diseases. Bosawás represents one of the largest intact tracts of habitat for jaguars (Panthera onca) in Central America, and given that these communities are located within the forest, jaguars may be at risk from disease spillover from hunting dogs. Dog owners reported that four of 49 dogs had been attacked and killed by jaguars in the past year, and that retaliatory killing of jaguars was sometimes practiced. Disease spillover from dogs to wildlife could occur both in the course of dogs' hunting activities as well as during jaguar attacks. A better understanding of dog depredation by jaguars, pathogen exposure in jaguars, and a management strategy for the hunting dog population, are urgently needed to mitigate these dual threats to jaguars, improve the lives of hunting dogs, and safeguard the health of their owners. Copyright © 2016 Elsevier B.V. All rights reserved.

Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms

Science.gov (United States)

Dufour, Clément; Wang, Peng; Boussu, François; Soulat, Damien

2014-10-01

Forming of continuous fibre reinforcements and thermoplastic resin commingled prepregs can be performed at room temperature due to its similar textile structure. The "cool" forming stage is better controlled and more economical. The increase of temperature and the resin consolidation phases after the forming can be carried out under the isothermal condition thanks to a closed system. It can avoid the manufacturing defects easily experienced in the non-isothermal thermoforming, in particular the wrinkling [1]. Glass/Polypropylene commingled yarns have been woven inside different three-dimensional (3D) warp interlock fabrics and then formed using a double-curved shape stamping tool. The present study investigates the in-plane and through-thickness behaviour of the 3D warp interlock fibrous reinforcements during forming with a hemispherical punch. Experimental data allow analysing the forming behaviour in the warp and weft directions and on the influence of warp interlock architectures. The results point out that the layer to layer warp interlock preform has a better stamping behaviour, in particular no forming defects and good homogeneity in thickness.

50 CFR 20.73 - Violation of foreign law.

Science.gov (United States)

2010-10-01

..., any migratory bird, or any part, nest, or egg of any such bird taken, bought, sold, transported... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Federal, State, and Foreign Law § 20.73 Violation of...

Drug metabolism in birds

Science.gov (United States)

Pan, Huo Ping; Fouts, James R.

1979-01-01

Papers published over 100 years since the beginning of the scientific study of drug metabolism in birds were reviewed. Birds were found to be able to accomplish more than 20 general biotransformation reactions in both functionalization and conjugation. Chickens were the primary subject of study but over 30 species of birds were used. Large species differences in drug metabolism exist between birds and mammals as well as between various birds, these differences were mostly quantitative. Qualitative differences were rare. On the whole, drug metabolism studies in birds have been neglected as compared with similar studies on insects and mammals. The uniqueness of birds and the advantages of using birds in drug metabolism studies are discussed. Possible future studies of drug metabolism in birds are recommended.

Collision sensitive niche profile of the worst affected bird-groups at wind turbine structures in the Federal State of Brandenburg, Germany.

Science.gov (United States)

Bose, Anushika; Dürr, Tobias; Klenke, Reinhard A; Henle, Klaus

2018-02-28

Biodiversity-related impacts at wind energy facilities have increasingly become a cause of conservation concern, central issue being the collision of birds. Utilizing spatial information of their carcass detections at wind turbines (WTs), we quantified the detections in relation to the metric distances of the respective turbines to different land-use types. We used ecological niche factor analysis (ENFA) to identify combinations of land-use distances with respect to the spatial allocation of WTs that led to higher proportions of collisions among the worst affected bird-groups: Buntings, Crows, Larks, Pigeons and Raptors. We also assessed their respective similarities to the collision phenomenon by checking for overlaps amongst their distance combinations. Crows and Larks showed the narrowest "collision sensitive niche"; a part of ecological niche under higher risk of collisions with turbines, followed by that of Buntings and Pigeons. Raptors had the broadest niche showing significant overlaps with the collision sensitive niches of the other groups. This can probably be attributed to their larger home range combined with their hunting affinities to open landscapes. Identification of collision sensitive niches could be a powerful tool for landscape planning; helping avoid regions with higher risks of collisions for turbine allocations and thus protecting sensitive bird populations.

The comparison of two continuum damage mechanics-based material models for formability prediction of AA6082 under hot stamping conditions

Science.gov (United States)

Shao, Z.; Li, N.; Lin, J.

2017-09-01

The hot stamping and cold die quenching process has experienced tremendous development in order to obtain shapes of structural components with great complexity in automotive applications. Prediction of the formability of a metal sheet is significant for practical applications of forming components in the automotive industry. Since microstructural evolution in an alloy at elevated temperature has a large effect on formability, continuum damage mechanics (CDM)-based material models can be used to characterise the behaviour of metals when a forming process is conducted at elevated temperatures. In this paper, two sets of unified multi-axial constitutive equations based on material’s stress states and strain states, respectively, were calibrated and used to effectively predict the thermo-mechanical response and forming limits of alloys under complex hot stamping conditions. In order to determine and calibrate the two material models, formability tests of AA6082 using a developed novel biaxial testing system were conducted at various temperatures and strain rates under hot stamping conditions. The determined unified constitutive equations from experimental data are presented in this paper. It is found that both of the stress-state based and strain-state based material models can predict the formability of AA6082 under hot stamping conditions.

Ben Franklin, America’s Postage Stamp Star — on the Wane?

Directory of Open Access Journals (Sweden)

François Brunet

2010-01-01

Full Text Available This paper is an assessment of Ben Franklin’s evolving figure in U.S. postage stamps, focusing especially on the contrast between the 2006 tercentennial Franklin 4-stamp panel, a rather high-brow representation of Franklin as an intellectual, and his traditional image as a homely, common face. The singular history of U.S. postage stamps, with their innovative choice of historical figures as subject matter and their broader emphasis on commemoration, is briefly summarized. The evolution of the Franklin figure — the most common postal image, along with George Washington — is then detailed, showing how the traditional image prevailed until the 1950s, before being progressively displaced by a more cultural and, lately, intellectual image of the nation’s “electrizer”.Cet article vise à interpréter l’évolution de la figure de Benjamin Franklin dans les timbres-poste des Etats-Unis, en se fondant notamment sur le contraste entre le bloc de quatre timbres émis lors du tricentenaire en 2006, qui représente Franklin dans les différents métiers d’un intellectuel des Lumières, et son image traditionnelle d’Américain simple et moyen. On retrace tout d’abord l’histoire singulière des timbres américains, caractérisée par le choix innovant de figures historiques comme sujets et plus généralement par la prééminence de la fonction commémorative. Puis on étudie en détail l’évolution de la figure de Franklin — sujet le plus fréquent des timbres américains avec George Washington — en montrant que l’image traditionnelle s’est perpétuée jusqu’aux années 1950, avant de céder progressivement à une image plus culturelle et, récemment, plus intellectuelle.

Influence of temperature and friction on the 22MnB5 formability under hot stamping conditions

Science.gov (United States)

Venturato, G.; Ghiotti, A.; Bruschi, S.

2018-05-01

The need to increase the safety and decrease the weight of the car body-in-white has determined the success of the direct hot stamping process as a primary technology for the automotive sector. Thanks to this process, parts with high strength-to-weight ratio can be obtained along with high stiffness and increase of the crashworthiness properties. Moreover, the thinner metal sheets used to manufacture the pieces lead to a decrease of the total weight of the car body-in-white, with a consequent reduction of the CO2 emissions. The direct hot stamping process is becoming the key to obtain pieces with high mechanical properties, thanks to the quenching stage that allows the manufacture of complex shapes characterized by a fully martensitic structure, thanks to the forming stage at elevated temperature and subsequent hardening inside the cooled dies. The aim of this paper is the investigation of the influence that the forming temperature may have on the formability of 22MnB5 steel sheets, commonly used in the hot stamping process of automotive components. Nakajima tests were carried out at different temperatures and the Forming Limit Diagrams (FLDs) at rupture were obtained and analysed. The temperature influenced both the major and the minor strain at which the sheet failed, indicating that not only the formability increased at increasing temperature, but there was also a modification of the strain path, which means a modification of the strain states through which the part passes during the deformation process. Moreover, the influence of friction is studied using a model developed in the LS-Dyna FEM environment. The obtained data are of great importance for an accurate calibration of Finite Element (FE) models of the hot stamping of real components in order to get optimal process parameters to obtain defects-free pieces.

CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

OpenAIRE

Pasquale Russo Spena

2017-01-01

This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

How Does Cultural Change Affect Indigenous Peoples' Hunting Activity? An Empirical Study Among the Tsimane' in the Bolivian Amazon

Directory of Open Access Journals (Sweden)

Ana Catarina Luz

2015-01-01

Full Text Available Wildlife hunting is an important economic activity that contributes to the subsistence of indigenous peoples and the maintenance of their cultural identity. Changes in indigenous peoples' ways of life affect the way they manage the ecosystems and resources around them, including wildlife populations. This paper explores the relationship between cultural change, or detachment from traditional culture, and hunting behaviour among the Tsimane', an indigenous group in the Bolivian Amazon. We interviewed 344 hunters in 39 villages to estimate their hunting activity and the degree of cultural change among them. We used multilevel analyses to assess the relationships between three different proxies for cultural change at the individual level (schooling, visits to a market town, and detachment from tradition, and the following two independent variables: 1 probability of engaging in hunting (i.e., hunting activity and 2 hunting efficiency with catch per unit effort (CPUE. We found a statistically significant negative association between schooling and hunting activity. Hunting efficiency (CPUE biomass/km was positively associated with visits to a market town, when holding other co-variates in the model constant. Other than biophysical factors, such as game abundance, hunting is also conditioned by social factors (e.g., schooling that shape the hunters' cultural system and impel them to engage in hunting or deter them from doing so.

75 FR 32872 - Migratory Bird Hunting; Supplemental Proposals for Migratory Game Bird Hunting Regulations for...

Science.gov (United States)

2010-06-10

... Council: July 23-24, Radisson Admiral Semmes Hotel, Mobile, AL. Central Flyway Council: July 21-23... under Executive Order 12866. OMB bases its determination of regulatory significance upon the following... analysis was prepared for the 2008-09 season. This analysis was based on data from the 2006 National...

78 FR 52657 - Migratory Bird Hunting; Final Frameworks for Early-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2013-08-23

... into account the zones of temperature and the distribution, abundance, economic value, breeding habits....105 to allow the shooting of crippled waterfowl from a motorboat under power in New Jersey, North...

75 FR 58249 - Migratory Bird Hunting; Final Frameworks for Late-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2010-09-23

... experiment indicate that the percentage of migrant geese harvested in the 6-county region surrounding Terre... unacceptable harvest of non-target populations during the special season (60 FR 45020). Because the Terre Haute... late season to continue in the Terre Haute region on an experimental basis until the status of...

75 FR 52873 - Migratory Bird Hunting; Final Frameworks for Early-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2010-08-30

... would be to summarize historical analyses and dialogue regarding the issue of early-season teal harvest.... Definitions Dark geese: Canada geese, white-fronted geese, brant (except in Alaska, California, Oregon...

78 FR 35844 - Migratory Bird Hunting; Supplemental Proposals for Migratory Game Bird Hunting Regulations for...

Science.gov (United States)

2013-06-14

..., Puerto Rico, and the Virgin Islands. The Committee will also develop regulations recommendations for September waterfowl seasons in designated States, special sea duck seasons in the Atlantic Flyway, and... usually commence at 8 a.m. on the days indicated. Atlantic Flyway Council: July 18-19, Mystic Hilton...

76 FR 58681 - Migratory Bird Hunting; Final Frameworks for Late-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2011-09-21

..., has determined that this rule will not unduly burden the judicial system and that it meets the... another individual, and may not be sold, bartered, traded, or otherwise provided to another person. If the...

77 FR 23093 - Migratory Bird Hunting; Proposed 2012-13 Migratory Game Bird Hunting Regulations (Preliminary...

Science.gov (United States)

2012-04-17

... ``the zones of temperature and to the distribution, abundance, economic value, breeding habits, and... perceived changes, and the absence of adequate experimental controls. Consequently, we established... splits, to hunter recruitment, retention, and/or satisfaction are equivocal or lacking. In the face of...

76 FR 36508 - Migratory Bird Hunting; Supplemental Proposals for Migratory Game Bird Hunting Regulations for...

Science.gov (United States)

2011-06-22

..., Newport, RI. Mississippi Flyway Council: July 22-23, Crowne Plaza, Little Rock, AR. Central Flyway Council... with two splits or four zones) for use during the 2011-12 regulations cycle season (see the April 8... configurations through the 2012 regulations cycle. The Central and Pacific Flyway Councils recommended extending...

77 FR 54451 - Migratory Bird Hunting; Migratory Bird Hunting Regulations on Certain Federal Indian Reservations...

Science.gov (United States)

2012-09-05

... year and have a primary emphasis on such species as mourning and white-winged doves. Late seasons begin..., daily bag limit is 10 mourning or white-winged doves, singly, or in the aggregate. For the late season, the daily bag limit is 10 mourning doves. Possession limits are twice the daily bag limits after the...

77 FR 58657 - Migratory Bird Hunting; Migratory Bird Hunting Regulations on Certain Federal Indian Reservations...

Science.gov (United States)

2012-09-21

..., early seasons begin during September each year and have a primary emphasis on such species as mourning..., mourning doves, white-winged doves, white-tipped doves, and band-tailed pigeons; and the status and harvest...: For the early season, daily bag limit is 10 mourning or white-winged doves, singly, or in the...

78 FR 47135 - Migratory Bird Hunting; Proposed Migratory Bird Hunting Regulations on Certain Federal Indian...

Science.gov (United States)

2013-08-02

... commonly include such species as American woodcock, sandhill cranes, mourning doves, and white-winged doves... begin September 1 and end September 15, 2013. Daily bag limits would be 10 mourning or white-winged... December 23, 2013. The daily bag limit would be 10 mourning doves. The possession limit would be twice the...

75 FR 53774 - Migratory Bird Hunting; Migratory Bird Hunting Regulations on Certain Federal Indian Reservations...

Science.gov (United States)

2010-09-01

.... The American black duck (Anas rubripes) estimate was similar to the 2009 estimate and 7 percent below... the 2009 estimate of 10.3 0.9 million. Status of Geese and Swans We provide information on the... black ducks, 3 wood ducks, 3 redheads, and 6 mallards (only 3 of which may be hens). The possession...

76 FR 54051 - Migratory Bird Hunting; Final Frameworks for Early-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2011-08-30

... season dates, shooting hours, and daily bag and possession limits for the 2011-12 season. These... weekend, holidays, or other non-school days when youth hunters would have the maximum opportunity to... hunters would encounter whooping cranes. Kentucky has also opted to delay legal shooting hours until...

77 FR 49867 - Migratory Bird Hunting; Proposed Frameworks for Late-Season Migratory Bird Hunting Regulations

Science.gov (United States)

2012-08-17

... toward a more holistic and uniform approach to Canada goose harvest management across the Flyway and are... Management, U.S. Fish and Wildlife Service, 4401 N. Fairfax Drive, MS 2042-PDM, Arlington, VA 22203. We will.... Regulatory Alternatives C. Zones and Split Seasons D. Special Seasons/Species Management i. September Teal...

77 FR 49679 - Migratory Bird Hunting; Proposed Migratory Bird Hunting Regulations on Certain Federal Indian...

Science.gov (United States)

2012-08-16

... (for the 1836 Treaty area in Michigan). Member Tribes of the Task Force are: the Bad River Band of the... the distribution, abundance, economic value, breeding habits, and times and lines of flight of...

76 FR 48693 - Migratory Bird Hunting; Proposed Migratory Bird Hunting Regulations on Certain Federal Indian...

Science.gov (United States)

2011-08-08

... 1836 Treaty area). Member Tribes of the Task Force are: the Bad River Band of the Lake Superior Tribe... regard for the zones of temperature and for the distribution, abundance, economic value, breeding habits...

Tribological behavior of a new green industrial lubricant for stamping operations - Application to Stainless Steels

Science.gov (United States)

Buteri, A.; Borgeot, M.; Roizard, X.; Lallemand, F.; Melot, J.-M.; Morand, L.

2016-11-01

Thanks to a fruitful collaboration between different academic and industrial research entities, a new green lubricant solution AFULudine has been developed for stamping operations in substitution to the usual mineral oils, with the idea and the wish to combine different essential properties such as a low environmental impact and ease-of-use according to the market needs and the more and more restrictive environmental legislation (e.g. REACH). Based on the Self-Assembled-Monolayer (SAM) principle and so, on a perfect control of the chemical reaction between the solution and the substrate (grafting of molecules onto the surface), AFULudine offers an efficient technical answer for improving stamping processes. The present study, focused on stainless steel stampings (comparison between a 441-1.4509 grade and a 304-1.4301 grade), investigates the performances of this new green industrial lubricant at different levels: from laboratory tests to industrial conditions through the production of hundreds of parts. Additional results coming from tests made on a rotational pin- on-disk tribometer will allow us to appreciate and retrieve more local information about the tribofilm creation during sliding. Moreover, the comparison with different mineral oils currently used at industrial scale, will strengthen the AFULudine performances. Indeed, this new solution usually outperforms a majority of such oils whatever their viscosity and their own composition: formulation, content of extreme pressure additives (Cl, S, P)...

Lead pollution from waterfowl hunting in wetlands and rice fields in Argentina.

Science.gov (United States)

Romano, Marcelo; Ferreyra, Hebe; Ferreyroa, Gisele; Molina, Fernando V; Caselli, Andrea; Barberis, Ignacio; Beldoménico, Pablo; Uhart, Marcela

2016-03-01

The pollution of wetlands by lead derived from waterfowl hunting with lead shot was investigated. We determined soil pellet density and Pb concentration in soil, water and vegetation in natural wetlands and rice fields in central-eastern Santa Fe province, Argentina. Pellet density varied greatly among hunting sites (between 5.5-141 pellets/m(2)) and pellets were present in some control sites. Soil Pb concentration in most hunting sites (approximately 10-20 mg kg(-1)) was not much higher than in control sites (~5-10 mg kg(-1)), with the exception of the site with highest pellet density, which also had a high Pb soil concentration. In water, on the other hand, Pb concentration was similar in all sites (~4-7 μg L(-1)), both control and hunting, and higher than reference values for aquatic media. Lead was also present in vegetation, including grasses and rice crops, in almost all cases. Most soil-collection sites were slightly acidic, and were frequently flooded. These results strongly suggest that metallic Pb from spent shot is oxidized and dissolved due to wetland conditions. Thus, the pollutant is readily mobilized and distributed across all wetland areas, effectively homogenizing its concentration in locations with and without hunting activities. The replacement of lead by nontoxic materials in pellets appears to be the only effective way to prevent Pb pollution in wetlands. Copyright © 2015 Elsevier B.V. All rights reserved.

Disruption of Ttll5/Stamp Gene (Tubulin Tyrosine Ligase-like Protein 5/SRC-1 and TIF2-associated Modulatory Protein Gene) in Male Mice Causes Sperm Malformation and Infertility*

Science.gov (United States)

Lee, Geun-Shik; He, Yuanzheng; Dougherty, Edward J.; Jimenez-Movilla, Maria; Avella, Matteo; Grullon, Sean; Sharlin, David S.; Guo, Chunhua; Blackford, John A.; Awasthi, Smita; Zhang, Zhenhuan; Armstrong, Stephen P.; London, Edra C.; Chen, Weiping; Dean, Jurrien; Simons, S. Stoney

2013-01-01

TTLL5/STAMP (tubulin tyrosine ligase-like family member 5) has multiple activities in cells. TTLL5 is one of 13 TTLLs, has polyglutamylation activity, augments the activity of p160 coactivators (SRC-1 and TIF2) in glucocorticoid receptor-regulated gene induction and repression, and displays steroid-independent growth activity with several cell types. To examine TTLL5/STAMP functions in whole animals, mice were prepared with an internal deletion that eliminated several activities of the Stamp gene. This mutation causes both reduced levels of STAMP mRNA and C-terminal truncation of STAMP protein. Homozygous targeted mutant (Stamptm/tm) mice appear normal except for marked decreases in male fertility associated with defects in progressive sperm motility. Abnormal axonemal structures with loss of tubulin doublets occur in most Stamptm/tm sperm tails in conjunction with substantial reduction in α-tubulin polyglutamylation, which closely correlates with the reduction in mutant STAMP mRNA. The axonemes in other structures appear unaffected. There is no obvious change in the organs for sperm development of WT versus Stamptm/tm males despite the levels of WT STAMP mRNA in testes being 20-fold higher than in any other organ examined. This defect in male fertility is unrelated to other Ttll genes or 24 genes previously identified as important for sperm function. Thus, STAMP appears to participate in a unique, tissue-selective TTLL-mediated pathway for α-tubulin polyglutamylation that is required for sperm maturation and motility and may be relevant for male fertility. PMID:23558686

Extent and ecological consequences of hunting in Central African rainforests in the twenty-first century.

Science.gov (United States)

Abernethy, K A; Coad, L; Taylor, G; Lee, M E; Maisels, F

2013-01-01

Humans have hunted wildlife in Central Africa for millennia. Today, however, many species are being rapidly extirpated and sanctuaries for wildlife are dwindling. Almost all Central Africa's forests are now accessible to hunters. Drastic declines of large mammals have been caused in the past 20 years by the commercial trade for meat or ivory. We review a growing body of empirical data which shows that trophic webs are significantly disrupted in the region, with knock-on effects for other ecological functions, including seed dispersal and forest regeneration. Plausible scenarios for land-use change indicate that increasing extraction pressure on Central African forests is likely to usher in new worker populations and to intensify the hunting impacts and trophic cascade disruption already in progress, unless serious efforts are made for hunting regulation. The profound ecological changes initiated by hunting will not mitigate and may even exacerbate the predicted effects of climate change for the region. We hypothesize that, in the near future, the trophic changes brought about by hunting will have a larger and more rapid impact on Central African rainforest structure and function than the direct impacts of climate change on the vegetation. Immediate hunting regulation is vital for the survival of the Central African rainforest ecosystem.

Line Transect Surveys Underdetect Terrestrial Mammals: Implications for the Sustainability of Subsistence Hunting

Science.gov (United States)

Levi, Taal; Oliveira, Luiz F. B.; Luzar, Jeffrey B.; Overman, Han; Read, Jane M.

2016-01-01

Conservation of Neotropical game species must take into account the livelihood and food security needs of local human populations. Hunting management decisions should therefore rely on abundance and distribution data that are as representative as possible of true population sizes and dynamics. We simultaneously applied a commonly used encounter-based method and an infrequently used sign-based method to estimate hunted vertebrate abundance in a 48,000-km2 indigenous landscape in southern Guyana. Diurnal direct encounter data collected during three years along 216, four-kilometer -long transects consistently under-detected many diurnal and nocturnal mammal species readily detected through sign. Of 32 species analyzed, 31 were detected by both methods; however, encounters did not detect one and under-detected another 12 of the most heavily hunted species relative to sign, while sign under-detected 12 never or rarely collected species relative to encounters. The six most important game animals in the region, all ungulates, were not encountered at 11–40% of village and control sites or on 29–72% of transects where they were detected by sign. Using the sign methodology, we find that tapirs, one of the terrestrial vertebrates considered most sensitive to overexploitation, are present at many sites where they were never visually detected during distance sampling. We find that this is true for many other species as well. These high rates of under-detection suggest that behavioral changes in hunted populations may affect apparent occurrence and abundance of these populations. Accumulation curves (detection of species on transects) were much steeper for sign for 12 of 16 hunted species than for encounters, but that pattern was reversed for 12 of 16 species unhunted in our area. We conclude that collection of sign data is an efficient and effective method of monitoring hunted vertebrate populations that complements encounter and camera-trapping methods in areas impacted by

Academic training: The Hunt for the Higgs Particle

CERN Multimedia

2007-01-01

2006-2007 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 27, 28 February, 1st March, from 11:00 to 12:00 Main Auditorium, bldg. 500 The Hunt for the Higgs Particle F. ZWIRNER, University and INFN, Padova, Italy With the advent of the LHC, the hunt for the Higgs boson is entering its crucial phase. These three lectures will review: the Higgs mechanism; its implementation in the minimal Standard Model; possible alternatives with and without elementary scalar fields; the presently available information on electroweak gauge symmetry breaking and the Higgs particle; the properties of the Higgs boson(s) in the Standard Model and its supersymmetric extensions; the strategies for direct searches at colliders, with emphasis on the LHC, and comments on the possible scenarios that may emerge.

Authentication, Time-Stamping and Digital Signatures

Science.gov (United States)

Levine, Judah

1996-01-01

Time and frequency data are often transmitted over public packet-switched networks, and the use of this mode of distribution is likely to increase in the near future as high-speed logical circuits transmitted via networks replace point-to-point physical circuits. ALthough these networks have many technical advantages, they are susceptible to evesdropping, spoofing, and the alteration of messages enroute using techniques that are relatively simple to implement and quite difficult to detect. I will discuss a number of solutions to these problems, including the authentication mechanism used in the Network Time Protocol (NTP) and the more general technique of signing time-stamps using public key cryptography. This public key method can also be used to implement the digital analog of a Notary Public, and I will discuss how such a system could be realized on a public network such as the Internet.

CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

Directory of Open Access Journals (Sweden)

Pasquale Russo Spena

2017-10-01

Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

Using Scavenger Hunts to Familiarize Students with Scientific Journal Articles.

Science.gov (United States)

Lijek, Rebeccah S; Fankhauser, Sarah C

2016-03-01

Primary scientific literature can be difficult to navigate for anyone unfamiliar with its foreign, formal structure. We sought to create a fun, easy learning tool to help familiarize students of all ages with the structure of a scientific article. Our main learning objective was for the student to realize that science writing is formulaic-that specific information is found in predictable locations within an article-and that, with an understanding of the formula, anyone can comfortably navigate any journal article and accurately predict what to expect to find in each section. To this end, we designed a Journal Article Scavenger Hunt that requires the user to find and identify a series of commonplace features of a primary research article. The scavenger hunt activity is quick and easy to implement, and is adaptable to various ages and settings, including the classroom, lab, and at outreach events. The questions in the scavenger hunt can be scaled in difficulty and specificity to suit the instructor's needs. Over many years of using this activity, we have received positive feedback from students of all ages, from elementary school students to lay adult-learners as well as science teachers themselves. By making the unknown seem predictable and approachable, the scavenger hunt helps a variety of audiences feel more comfortable with science and more confident in their ability to engage directly with the scientific literature. Journal of Microbiology & Biology Education.

Birds of Sabaki Birds of Sabaki

African Journals Online (AJOL)

CJ

2005-02-25

Feb 25, 2005 ... covers approximately 250ha.The area encompassed by this study extends from Mambrui to the north, the sea to the east, the opposite bank of the estuary to the south and the Sabaki bridge and Malindi-Garsen road to the west. The area is defined as an Important Bird Area(IBA) by BirdLife International in ...

Geocaching: Finding Mathematics in a Global Treasure Hunt

Science.gov (United States)

Bragg, Leicha A.

2014-01-01

If you love taking mathematics lessons outdoors, then you will love this article. Leicha Bragg describes geocaching, which combines technology, treasure hunting and mathematics, and results in purposeful, authentic and engaging mathematics.

Can Food Stamps Do More to Improve Food Choices? An Economic Perspective--Making Healthy Food Choices Easier: Ideas From Behavioral Economics

OpenAIRE

Mancino, Lisa; Andrews, Margaret S.

2007-01-01

With obesity the most prevalent nutrition problem facing Americans at all economic levels, promoting diets that provide adequate nutrition without too many calories has become an important objective for the Food Stamp Program. Findings from behavioral economics suggest innovative, low-cost ways to improve the diet quality of food stamp participants without restricting their freedom of choice. Unlike more traditional economic interventions, such as changing prices or banning specific foods, th...

Plant-Fungus Marriages

Indian Academy of Sciences (India)

Every plant requires mineral elements for growth. A mnemonic ... lar coils. More commonly, the hypha forms highly branched, .... stamps on the edible and poisonous mushrooms (Figure 2). One of the ... but these days dogs are used for truffle. 'hunting' . .... example is a non-chlorophyllous plant known as Indian pipe or.

50 CFR 20.72 - Violation of State law.

Science.gov (United States)

2010-10-01

... export any migratory bird, or any part, nest, or egg of any such bird, in violation of any applicable law... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Federal, State, and Foreign Law § 20.72 Violation of...

50 CFR 20.71 - Violation of Federal law.

Science.gov (United States)

2010-10-01

... export any migratory bird, or any part, nest, or egg of any such bird, in violation of any act of... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Federal, State, and Foreign Law § 20.71 Violation of...

Extracting Hot spots of Topics from Time Stamped Documents

Science.gov (United States)

Chen, Wei; Chundi, Parvathi

2011-01-01

Identifying time periods with a burst of activities related to a topic has been an important problem in analyzing time-stamped documents. In this paper, we propose an approach to extract a hot spot of a given topic in a time-stamped document set. Topics can be basic, containing a simple list of keywords, or complex. Logical relationships such as and, or, and not are used to build complex topics from basic topics. A concept of presence measure of a topic based on fuzzy set theory is introduced to compute the amount of information related to the topic in the document set. Each interval in the time period of the document set is associated with a numeric value which we call the discrepancy score. A high discrepancy score indicates that the documents in the time interval are more focused on the topic than those outside of the time interval. A hot spot of a given topic is defined as a time interval with the highest discrepancy score. We first describe a naive implementation for extracting hot spots. We then construct an algorithm called EHE (Efficient Hot Spot Extraction) using several efficient strategies to improve performance. We also introduce the notion of a topic DAG to facilitate an efficient computation of presence measures of complex topics. The proposed approach is illustrated by several experiments on a subset of the TDT-Pilot Corpus and DBLP conference data set. The experiments show that the proposed EHE algorithm significantly outperforms the naive one, and the extracted hot spots of given topics are meaningful. PMID:21765568

Brown bear-human interactions associated with deer hunting on Kodiak Island

Science.gov (United States)

Barnes, Victor G.

1994-01-01

I compared distribution and range of brown bears (Ursus arctos middendorffi) with temporal and spatial distribution of Sitka black-tailed deer (Odocoileus hemionus sitkensis) hunting activity on westside Kodiak Island, Alaska, to examine impacts of deer hunting on bears. Mean number of bears that annually ranged ≤5 km from the coast, >5 km inland from the coast, or in both areas was 10, 8, and 11, respectively. Bears that exclusively or seasonally occupied the coast zone were usually classed as having moderate or high potential to interact with hunters because most hunter access and effort (>95%) was via the coast. Bears that ranged exclusively inland were considered unlikely to encounter hunters. Animals that ranged in both zones often (39%) moved inland during fall (Oct-Dec) and most bears (70%) denned in the inland zone. Females that denned near the coast entered dens later (x̄ = 22 Nov) than females that denned inland (x̄ = 12 Nov). Two radio-collared bears were known to raid deer-hunting camps and 9 other marked bears were observed by hunters or were located bear during their hunt. Seven to 21% of the respondents reported having a threatening encounter with a bear and 5-26% reported losing deer meat to bears. Human-induced mortality to radio-collared bears occurred more often near the coast (5) than inland (3); 7 bears were harvested by sport hunters and 1 was killed (nonsport) in a Native village. Deer hunters killed 2 unmarked females in defense of life or property situations in the study area. High bear densities and concentrated deer-hunting activity combine to make conflicts unavoidable. Adverse impacts to bears can be minimized by maintaining low levels of human activity in inland areas and improving hunter awareness of bear ecology and behavior.

Avian influenza virus risk assessment in falconry

Directory of Open Access Journals (Sweden)

Lüschow Dörte

2011-04-01

Full Text Available Abstract Background There is a continuing threat of human infections with avian influenza viruses (AIV. In this regard falconers might be a potential risk group because they have close contact to their hunting birds (raptors such as falcons and hawks as well as their avian prey such as gulls and ducks. Both (hunting birds and prey birds seem to be highly susceptible to some AIV strains, especially H5N1. We therefore conducted a field study to investigate AIV infections in falconers, their falconry birds as well as prey birds. Findings During 2 hunting seasons (2006/2007 and 2007/2008 falconers took tracheal and cloacal swabs from 1080 prey birds that were captured by their falconry birds (n = 54 in Germany. AIV-RNA of subtypes H6, H9, or H13 was detected in swabs of 4.1% of gulls (n = 74 and 3.8% of ducks (n = 53 using RT-PCR. The remaining 953 sampled prey birds and all falconry birds were negative. Blood samples of the falconry birds tested negative for AIV specific antibodies. Serum samples from all 43 falconers reacted positive in influenza A virus-specific ELISA, but remained negative using microneutralisation test against subtypes H5 and H7 and haemagglutination inhibition test against subtypes H6, H9 and H13. Conclusion Although we were able to detect AIV-RNA in samples from prey birds, the corresponding falconry birds and falconers did not become infected. Currently falconers do not seem to carry a high risk for getting infected with AIV through handling their falconry birds and their prey.

American Indians, hunting and fishing rates, risk, and the Idaho National Engineering and Environmental Laboratory

International Nuclear Information System (INIS)

Burger, J.

1999-01-01

Hunting, fishing, and recreational rates of 276 American Indians attending a festival at Fort Hall, near the Idaho National Engineering and Environmental Laboratory (INEEL), were examined. Nearly half of the sample lived on the Fort Hall Reservation, and half were American Indians from elsewhere in the western United States. An additional 44 White people attending the festival were also interviewed. The hypothesis that there are differences in hunting, fishing, and recreational rates as a function of tribal affiliation, educational level, gender, and age was examined. Information on hunting and fishing rates are central for understanding potential exposure scenarios for American Indians if the Department of Energy's INEEL lands are ever opened to public access, and the data are important because of the existence of tribal treaties that govern the legal and cultural rights of the Shoshone-Bannock regarding INEEL lands. Variations in hunting, fishing, and photography rates were explained by tribal affiliation (except fishing), gender, age, and schooling. Hunting rates were significantly higher for Indians (both those living on Fort Hall and others) than Whites. Men engaged in significantly higher rates of outdoor activities than women (except for photography). Potential and current hunting and fishing on and adjacent to INEEL was more similar among the local Whites and Fort Hall Indians than between these two groups and other American Indians

Birds and music

Directory of Open Access Journals (Sweden)

L Amini

2009-03-01

Through research in old mythological narrations, and literary texts, one could assume an intrinsic relationship between music and such sweet-singing mythological birds as phoenix, sphinx, Song-song, holy birds like Kership-tah, and other birds including swan and ring dove.

Child witch hunts in contemporary Ghana.

Science.gov (United States)

Adinkrah, Mensah

2011-09-01

The persecution of children as witches has received widespread reportage in the international mass media. In recent years, hundreds of children have been killed, maimed and abandoned across Africa based on individual and village-level accusations of witchcraft. Despite the media focus, to date, very little systematic study has investigated the phenomenon. In this case study, the persecution of child witches in Ghana is studied to explore the nature and patterns of witch hunts against children in the West African nation. There are no reliable national data on child abuse related to witchcraft accusations in Ghana. For this study, 13 cases of child witch hunts appearing in the local media during 1994-2009 were analyzed. Case summaries were constructed for each incident to help identify the socio-demographic characteristics of assailants and victims, victim-offender relationships, the methods of attacks, the spatial characteristics, as well as the motivations for the attacks. Children branded as witches ranged in age from 1-month-old to 17-years-old, were primarily from poor backgrounds, and lived in rural areas of the country. Accusations of witchcraft and witch assaults were lodged by close family members often through the encouragement of, or in concert with Christian clergymen and fetish priests. Accused witches were physically brutalized, tortured, neglected, and in two cases, murdered. For school-aged children, imputations of witchcraft contributed to stigmatization in both the community and at school, resulting in dropping out. The most frequently expressed reason for persecution of the child was suspicion that the child had used witchcraft to cause the death or illness of family relations or someone in the community. Another reason was suspicion that the child was responsible for the business failure or financial difficulties of a perceived victim. The results of this research are consistent with findings in the witchcraft literature suggesting that seemingly

Guanaco traces and hunting strategies at Alto Patache North Chilean fog oasis

Science.gov (United States)

Larrain, H.; Cereceda, P.; Pérez, L.

2010-07-01

1. In foregoing Fog Conferences, some of us have made explicit the rich botanic and faunistic inventory to be found at this Chilean Fog site. This was specially apparent under strong ENSO conditions, as it happened in 1997/98 in the area. Among the mammal biggest species represented, the guanaco (Lama guanicoe Müller) merits special mention. Clear traces of their presence and eventual hunting and slaughtering by primitive populations have survived until present times. Among them, the myriads of guanaco trails still covering practically all the slopes along the foggy area, close to the sea, and their wollowing and defecating places are found. Also, although less studied, plant eating traces left behind by roaming camelids can be seen. 2. Guanaco hunting traces still visible at Alto Patache can be portrayed differently through : A) Analysis of lithic artifacts used as arms in hunting operations; B) Botanic response to animal attack; C) Examination of topographic traits used by primitive man in guanaco hunting strategies. A. Hundreds of lithic instruments made of stone, were abandoned by hunters in situ, some of them were intact, some fragmented, which would demonstrate a direct relationship with hunting and slaughtering, and also their elaboration in workshops at place. Lithic points, scrapers and knives were found at places specially apt for hunting or slaughtering activities. Total isolation of the mountain fog site previous to our arrival in 1996, favoured their conservation at place. B. Careful observation of some local plants showed clear traces of guanaco feeding habits. As a proof thereof, old cactus of the species Eulychnia iquiquensis show in their basal portions clear signals in the forms of scars, caused by the eating by guanacos. Guanaco faeces were found at the foot of Ephedra plants. Many dead Stipa ichu plants (Gramineae), in different areas of the oasis provide evidence of cutting close to their basis, caused by sharp guanaco tooth under severe food

The role of hunting in village livelihoods in the Ashanti region, Ghana

Directory of Open Access Journals (Sweden)

D Crookes

2014-05-01

Full Text Available The article describes the results of two surveys conducted in six villages in the Ashanti region of Ghana.  The first was undertaken in August 2002 and the second during July 2004.  A total of 468 hunters and non-hunters were surveyed using targeted and systematic interviewing techniques.  The results indicate that hunting is an important contributor to total income in the villages, particularly for poorer households.  We find some evidence that hunting increases during lean periods, especially for hunters in the household survey.  Distance to Kumasi is a significant determinant of the number of animals sold on the market, and also influences the type of gear used for hunting.  Compliance with wildlife laws, notably species restrictions and the closed season is low, particularly amongst professional hunters.

A Path-Independent Forming Limit Criterion for Stamping Simulations

International Nuclear Information System (INIS)

Zhu Xinhai; Chappuis, Laurent; Xia, Z. Cedric

2005-01-01

Forming Limit Diagram (FLD) has been proved to be a powerful tool for assessing necking failures in sheet metal forming analysis for majority of stamping operations over the last three decades. However, experimental evidence and theoretical analysis suggest that its applications are limited to linear or almost linear strain paths during its deformation history. Abrupt changes or even gradual deviations from linear strain-paths will shift forming limit curves from their original values, a situation that occurs in vast majority of sequential stamping operations such as where the drawing process is followed by flanging and re-strike processes. Various forming limit models have been put forward recently to provide remedies for the problem, noticeably stress-based and strain gradient-based forming limit criteria. This study presents an alternative path-independent forming limit criterion. Instead of traditional Forming Limit Diagrams (FLD) which are constructed in terms of major - minor principal strains throughout deformation history, the new criterion defines a critical effective strain ε-bar* as the limit strain for necking, and it is shown that ε-bar* can be expressed as a function of current strain rate state and material work hardening properties, without the need of explicitly considering strain-path effects. It is given by ε-bar* = f(β, k, n) where β = (dε 2 /dε 1 ) at current deformation state, and k and n are material strain hardening parameters if a power law is assumed. The analysis is built upon previous work by Storen and Rice [1975] and Zhu et al [2002] with the incorporation of anisotropic yield models such as Hill'48 for quadratic orthotropic yield and Hill'79 for non-quadratic orthotropic yield. Effects of anisotropic parameters such as R-values and exponent n-values on necking are investigated in detail for a variety of strain paths. Results predicted according to current analysis are compared against experimental data gathered from literature

Scavenger hunt in the CERN Computing Centre

CERN Multimedia

CERN Bulletin

2013-01-01

Hidden among the racks of servers and disks in the CERN Computing Centre, you’ll find Hawaiian dancers, space aliens, gorillas… all LEGO® figurines! These characters were placed about the Centre for the arrival of Google’s Street View team for the world to discover.   PLEASE NOTE THAT THE COMPETITION IS OVER. ONLY FOR REFERENCE, HERE IS THE ORIGINAL ARTICLE. We’re pleased to announce our first global scavenger hunt! Spot three LEGO® figurines using Google’s Street View and you’ll be entered to win a gift of your choice from our CERN Gift Guide. A LEGO® figurine in the CERN Computing Centre, as seen on Google Street View. Here are the details: Find at least three LEGO® figurines hidden around the CERN Computing Centre using Google Street View.   Take screencaps of the figurines and e-mail the pictures to TreasureHunt-ComputingCentre@cern.ch. This email is no longer active.   The...

Influence of Group Size on the Success of Wolves Hunting Bison

OpenAIRE

MacNulty, Daniel R.; Tallian, Aimee; Stahler, Daniel R.; Smith, Douglas W.

2014-01-01

An intriguing aspect of social foraging behaviour is that large groups are often no better at capturing prey than are small groups, a pattern that has been attributed to diminished cooperation (i.e., free riding) in large groups. Although this suggests the formation of large groups is unrelated to prey capture, little is known about cooperation in large groups that hunt hard-to-catch prey. Here, we used direct observations of Yellowstone wolves (Canis lupus) hunting their most formidable prey...

Organic thin film transistors and polymer light-emitting diodes patterned by polymer inking and stamping

International Nuclear Information System (INIS)

Li Dawen; Guo, L Jay

2008-01-01

To fully realize the advantages of organic flexible electronics, patterning is very important. In this paper we show that a purely additive patterning technique, termed polymer inking and stamping, can be used to pattern conductive polymer PEDOT and fabricate sub-micron channel length organic thin film transistors. In addition, we applied the technique to transfer a stack of metal/conjugated polymer in one step and fabricated working polymer light-emitting devices. Based on the polymer inking and stamping technique, a roll-to-roll printing for high throughput fabrication has been demonstrated. We investigated and explained the mechanism of this process based on the interfacial energy consideration and by using the finite element analysis. This technique can be further extended to transfer more complex stacked layer structures, which may benefit the research on patterning on flexible substrates

Adhesive foot pads: an adaptation to climbing? An ecological survey in hunting spiders.

Science.gov (United States)

Wolff, Jonas O; Gorb, Stanislav N

2015-02-01

Hairy pads relying on dry adhesion are fascinating structures that convergently evolved among spiders and lizards. Numerous studies underline the functional aspects leading to their strong adhesion to smooth surfaces, but rarely has their role been studied in the context of natural habitats and surfaces that animals are faced with. In hunting spiders, the hairy foot pads (claw tufts) underneath the paired claws are assumed to be an adaptation to a climbing lifestyle, particularly on smooth plant surfaces. However, surfaces that are too smooth for claws to generate a sufficient grip are rather rare in natural habitats and above-ground habitats are occupied by hunting spiders both with and without claw tufts. In this study we estimated the proportion of claw tuft-bearing hunting spiders (ct+ ratio) among microhabitat-specific assemblages by conducting both a field study and a meta-analysis approach. The effect of surface characteristics, structure fragmentation and altitude of the microhabitat niche on the ct+ ratio was analyzed. We hypothesized that the ct+ ratio will be higher in (i) hunting spider assemblages obtained from microhabitats above the ground than from those at the ground and (ii) in hunting spider assemblages obtained from microhabitats with smoother surfaces (tree foliage) than those with rougher surfaces (barks, stones), and lower in (iii) hunting spider assemblages obtained from microhabitats with more fragmented structures (small leaves) than in those with comparable but less fragmented structures (large leaves). We found the ct+ ratio to be significantly affected by the microhabitat's distance from the ground, whereas surface characteristics and fragmentation of the substrates were of minor importance. This suggests that claw tufts are highly beneficial when the microhabitat's height exceeds a value where the additional pad-related costs are exceeded by the costs of dropping. We assume the benefit to be mainly due to gaining a high safety factor

STRATEGI KOMUNIKASI PEMASARAN EKOWISATA PADA DESTINASI WISATA DOLPHIN HUNTING LOVINA