WorldWideScience

Sample records for biosystems engineering research

  1. The Kernel Estimation in Biosystems Engineering

    Directory of Open Access Journals (Sweden)

    Esperanza Ayuga Téllez

    2008-04-01

    Full Text Available In many fields of biosystems engineering, it is common to find works in which statistical information is analysed that violates the basic hypotheses necessary for the conventional forecasting methods. For those situations, it is necessary to find alternative methods that allow the statistical analysis considering those infringements. Non-parametric function estimation includes methods that fit a target function locally, using data from a small neighbourhood of the point. Weak assumptions, such as continuity and differentiability of the target function, are rather used than "a priori" assumption of the global target function shape (e.g., linear or quadratic. In this paper a few basic rules of decision are enunciated, for the application of the non-parametric estimation method. These statistical rules set up the first step to build an interface usermethod for the consistent application of kernel estimation for not expert users. To reach this aim, univariate and multivariate estimation methods and density function were analysed, as well as regression estimators. In some cases the models to be applied in different situations, based on simulations, were defined. Different biosystems engineering applications of the kernel estimation are also analysed in this review.

  2. Third cycle university studies in Europe in the field of agricultural engineering and in the emerging discipline of biosystems engineering.

    Science.gov (United States)

    Ayuga, F; Briassoulis, D; Aguado, P; Farkas, I; Griepentrog, H; Lorencowicz, E

    2010-01-01

    The main objectives of European Thematic Network entitled 'Education and Research in Agricultural for Biosystems Engineering in Europe (ERABEE-TN)' is to initiate and contribute to the structural development and the assurance of the quality assessment of the emerging discipline of Biosystems Engineering in Europe. ERABEE is co-financed by the European Community in the framework of the LLP Programme. The partnership consists of 35 participants from 27 Erasmus countries, out of which 33 are Higher Education Area Institutions (EDU) and 2 are Student Associations (ASS). 13 Erasmus participants (e.g. Thematic Networks, Professional Associations, and Institutions from Brazil, Croatia, Russia and Serbia) are also involved in the Thematic Network through synergies. To date, very few Biosystems Engineering programs exist in Europe and those that are initiated are at a very primitive stage of development. The innovative and novel goal of the Thematic Network is to promote this critical transition, which requires major restructuring in Europe, exploiting along this direction the outcomes accomplished by its predecessor; the USAEE-TN (University Studies in Agricultural Engineering in Europe). It also aims at enhancing the compatibility among the new programmes of Biosystems Engineering, aiding their recognition and accreditation at European and International level and facilitating greater mobility of skilled personnel, researchers and students. One of the technical objectives of ERABEE is dealing with mapping and promoting the third cycle studies (including European PhDs) and supporting the integration of research at the 1st and 2nd cycle regarding European Biosystems Engineering university studies. During the winter 2008 - spring 2009 period, members of ERABEE conducted a survey on the contemporary status of doctoral studies in Europe, and on a possible scheme for promotion of cooperation and synergies in the framework of the third cycle of studies and the European Doctorate

  3. Abstracts of the 17. world congress of the International Commission of Agriculture and Biosystems Engineering (CIGR) : sustainable biosystems through engineering

    Energy Technology Data Exchange (ETDEWEB)

    Savoie, P.; Villeneuve, J.; Morisette, R. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada). Soils and Crops Research and Development Centre] (eds.)

    2010-07-01

    This international conference provided a forum to discuss methods to produce agricultural products more efficiently through improvements in engineering and technology. It was attended by engineers and scientists working from different perspectives on biosystems. Beyond food, farms and forests can provide fibre, bio-products and renewable energy. Seven sections of CIGR were organized in the following technical sessions: (1) land and water engineering, (2) farm buildings, equipment, structures and environment, (3) equipment engineering for plants, (4) energy in agriculture, (5) management, ergonomics and systems engineering, (6) post harvest technology and process engineering, and (7) information systems. The Canadian Society of Bioengineering (CSBE) merged its technical program within the 7 sections of CIGR. Four other groups also held their activities during the conference. The American Society of Agricultural and Biological Engineers (ASABE) organized its 9th international drainage symposium and the American Ecological Engineering Society (AEES) held its 10th annual meeting. The International Network for Information Technology in Agriculture (INFITA), and the 8th world congress on computers in agriculture also joined CIGR 2010.

  4. Electro-Quasistatic Simulations in Bio-Systems Engineering and Medical Engineering

    Directory of Open Access Journals (Sweden)

    U. van Rienen

    2005-01-01

    Full Text Available Slowly varying electromagnetic fields play a key role in various applications in bio-systems and medical engineering. Examples are the electric activity of neurons on neurochips used as biosensors, the stimulating electric fields of implanted electrodes used for deep brain stimulation in patients with Morbus Parkinson and the stimulation of the auditory nerves in deaf patients, respectively. In order to simulate the neuronal activity on a chip it is necessary to couple Maxwell's and Hodgkin-Huxley's equations. First numerical results for a neuron coupling to a single electrode are presented. They show a promising qualitative agreement with the experimentally recorded signals. Further, simulations are presented on electrodes for deep brain stimulation in animal experiments where the question of electrode ageing and energy deposition in the surrounding tissue are of major interest. As a last example, electric simulations for a simple cochlea model are presented comparing the field in the skull bones for different electrode types and stimulations in different positions.

  5. ¿Do Mountain Microorganisms (MM Really Work as a Biofertilization Strategy? A Biosystems Engineering Approach

    Directory of Open Access Journals (Sweden)

    Steven Umaña

    2017-06-01

    Full Text Available The use of microorganisms for engineering applications, in particular from a context of tropical biosystems engineering, has been useful to quantify important variables that are needed to understand the dynamics of edaphic systems in these areas. The current study is framed within those efforts and has been designed to document the potential of mountain microorganisms for soil biofertilization activities by using a standard experiment with two short-cycle plants. For that, an experiment including three biofertilization irrigation treatments, associated with three retention times in a bioreactor, were selected and compared with a control that was irrigated only with water. After harvesting, a series of biological, chemical, structural, and agronomic tests were conducted on both the soil and the cultivated plants to determine potential differences in the effect of the experimental treatments. Results indicated that a bioreactor retention time, close to two weeks, was the best treatment in terms of positive and significant impact on the biological activity, soil chemical properties, and quality of crops. Such significant differences seem to be related with a more active soil biosystem for the associated treatment. This demonstrates that biofertilization with mountain microorganisms works; but it also suggests that a series of engineering parameters should be studied to optimize such low cost and sustainable fertilization method.

  6. BioSystems

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NCBI BioSystems Database provides integrated access to biological systems and their component genes, proteins, and small molecules, as well as literature...

  7. Fiscal 1997 industrial technology R and D project. Research report on development of use technology of bio- resources such as complex biosystem (Development of use and production technologies of complex biosystems); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This project aims to establish production technology of functional substances, oil degradation and purification technology, and use technology of unused oil fraction through development of cultivation control technology of complex biosystems. For functional material production technology, as functional substances some specific marine bacteria inhibitors, antibreeding substances of microalgae, and UV absorption substances were isolated. The productivity of korormicin as specific inhibitor against marine bacteria was improved considerably by cultivation method. For research on molecular genetic analysis technology, a new identification technology and a simple automatic analysis system of microeucaryotes using genes were developed. For global environment purification technology such as efficient degradation of pollutants, study was made on cultivation control technology of phenol- degrading consortia, population dynamics of oil-degrading microbial consortia and a restoration method of oil pollution by complex biosystem at lower temperature, and the demonstration experiment of oil degradation were carried out. (NEDO)

  8. Microfluidics for food, agriculture and biosystems industries.

    Science.gov (United States)

    Neethirajan, Suresh; Kobayashi, Isao; Nakajima, Mitsutoshi; Wu, Dan; Nandagopal, Saravanan; Lin, Francis

    2011-05-07

    Microfluidics, a rapidly emerging enabling technology has the potential to revolutionize food, agriculture and biosystems industries. Examples of potential applications of microfluidics in food industry include nano-particle encapsulation of fish oil, monitoring pathogens and toxins in food and water supplies, micro-nano-filtration for improving food quality, detection of antibiotics in dairy food products, and generation of novel food structures. In addition, microfluidics enables applications in agriculture and animal sciences such as nutrients monitoring and plant cells sorting for improving crop quality and production, effective delivery of biopesticides, simplified in vitro fertilization for animal breeding, animal health monitoring, vaccination and therapeutics. Lastly, microfluidics provides new approaches for bioenergy research. This paper synthesizes information of selected microfluidics-based applications for food, agriculture and biosystems industries. © The Royal Society of Chemistry 2011

  9. Education of indoor enviromental engineering technology

    Czech Academy of Sciences Publication Activity Database

    Kic, P.; Zajíček, Milan

    2011-01-01

    Roč. 9, Spec. 1 (2011), s. 83-90 ISSN 1406-894X. [Biosystems Engineering 2011. Tartu, 12.05.2011-13.05.2011] Institutional research plan: CEZ:AV0Z10750506 Keywords : Biosystems engineering * indoor environment * study * programs Subject RIV: AM - Education http://library.utia.cas.cz/separaty/2011/VS/zajicek- education of indoor enviromental engineering technology .pdf

  10. Ice Engineering Research Area

    Data.gov (United States)

    Federal Laboratory Consortium — Refrigerated Physical Modeling of Waterways in a Controlled EnvironmentThe Research Area in the Ice Engineering Facility at the Cold Regions Research and Engineering...

  11. Greenhouse gas (GHG) emission in organic farming. Approximate quantification of its generation at the organic garden of the School of Agricultural, Food and Biosystems Engineering (ETSIAAB) in the Technical University of Madrid (UPM)

    Science.gov (United States)

    Campos, Jorge; Barbado, Elena; Maldonado, Mariano; Andreu, Gemma; López de Fuentes, Pilar

    2016-04-01

    As it well-known, agricultural soil fertilization increases the rate of greenhouse gas (GHG) emission production such as CO2, CH4 and N2O. Participation share of this activity on the climate change is currently under study, as well as the mitigation possibilities. In this context, we considered that it would be interesting to know how this share is in the case of organic farming. In relation to this, a field experiment was carried out at the organic garden of the School of Agricultural, Food and Biosystems Engineering (ETSIAAB) in the Technical University of Madrid (UPM). The orchard included different management growing areas, corresponding to different schools of organic farming. Soil and gas samples were taken from these different sites. Gas samples were collected throughout the growing season from an accumulated atmosphere inside static chambers inserted into the soil. Then, these samples were carried to the laboratory and there analyzed. The results obtained allow knowing approximately how ecological fertilization contributes to air pollution due to greenhouse gases.

  12. Designing requirements engineering research

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Heerkens, Johannes M.G.

    2007-01-01

    Engineering sciences study different topics than natural sciences, and utility is an essential factor in choosing engineering research problems. But despite these differences, research methods for the engineering sciences are no different than research methods for any other kind of science. At most

  13. Teaching engineering design research

    DEFF Research Database (Denmark)

    Blessing, Lucienne; Andreasen, Mogens Myrup

    2005-01-01

    to improve design for centuries, it was not until well in the second half of the 20th century that engineering design became a research topic (see pahl and Beitz (1996), Heymann (2004) for historical overviews). Engineering research, such as research into thermodynamics, mechanics and materials, has a much......The importance og engineering design as an industrial activity, and the increasingly complex and dynamic context in which it takes place, has led to the wish to improve the effectiveness and efficiency of engineering design in practice as well as in education. Although attempts have been made...... by PhD students. This has created the demand for a clear, efficient way of learning the crafmanship of doing design research, a demand which is in strong contrast to the state of design research in general. This article reflects the authors' efforts in running a summer school om engineering design...

  14. Engine Research Center: Advanced Diesel Engine Research

    National Research Council Canada - National Science Library

    Corradini, M

    1999-01-01

    .... Fundamental projects addressing continued development of advanced multidimensional modeling, advanced diagnostic development, experimental investigation of fluid mechanic mixing phenomena and engine...

  15. Engine Environment Research Facility (EERF)

    Data.gov (United States)

    Federal Laboratory Consortium — Description: This facility supports research and development testing of the behavior of turbine engine lubricants, fuels and sensors in an actual engine environment....

  16. Materials Engineering Research Facility (MERF)

    Data.gov (United States)

    Federal Laboratory Consortium — Argonne?s Materials Engineering Research Facility (MERF) enables engineers to develop manufacturing processes for producing advanced battery materials in sufficient...

  17. Empirical Research In Engineering Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2007-01-01

    Increasingly engineering design research involves the use of empirical studies that are conducted within an industrial environment [Ahmed, 2001; Court 1995; Hales 1987]. Research into the use of information by designers or understanding how engineers build up experience are examples of research...... of research issues. This paper describes case studies of empirical research carried out within industry in engineering design focusing upon information, knowledge and experience in engineering design. The paper describes the research methods employed, their suitability for the particular research aims...

  18. Global Journal of Engineering Research

    African Journals Online (AJOL)

    The Global Journal of Engineering Research is aimed at promoting research in all areas of Engineering Research including Mechanical, Civil, Electrical, Chemical, Electronics, Geological etc. Visit the Global Journal Series website here: http://www.globaljournalseries.com/ ...

  19. Registering plant dysfunction in artificial biosystems through fluorescence imaging technique

    Science.gov (United States)

    Nikolova, Alexandra; Krumov, Alexandar; Vassilev, Vesselin

    Humanity ambitions in space exploration and long-term men-operated space missions evoke an increasing interest to artificial ecosystem researches. Advanced studies of plant biosystems provoke development of new innovative technologies for plant cultivation in man-made environment. Closed ecosystems of different types and structure are now used for space horticulture, cultivation of genetically modified species, bio-products for pharmacies and industry etc. New technologies are required to monitor and control basic parameters of future bioregenerative life support system, especially of plants photosynthetic activity as the most fundamental biological process. Authors propose a conception for a non-invasive control of plant physiological status in closed biosystem through spatial registration of chlorophyll fluorescence. This approach allows an early detection of stress impact on plants, reveal the dynamic and direction of the negative influence and the level of plant stress. Technical requirements for obtaining plant fluorescence images are examined in close relation with plant illumination conditions. Problems related with optimised plant illumination are discussed. Examples of fluorescence images of healthy and stressed plants demonstrate the sensibility and rapidity of signal changes caused by plant dysfunction. Proposed conception could be used for developing new technical solutions in autocontrolled bio-support systems, based on real time analysis of fluorescence images.

  20. Spin label EPR-based characterization of biosystem complexity

    NARCIS (Netherlands)

    Strancar, J.; Koklic, T.; Arsov, Z.; Filipic, B.; Stopar, D.; Hemminga, M.A.

    2005-01-01

    Following the widely spread EPR spin-label applications for biosystem characterization, a novel approach is proposed for EPR-based characterization of biosystem complexity. Hereto a computational method based on a hybrid evolutionary optimization (HEO) is introduced. The enormous volume of

  1. Phenomena of synchronized response in biosystems and the possible mechanism.

    Science.gov (United States)

    Xu, Jingjing; Yang, Fan; Han, Danhong; Xu, Shengyong

    2018-02-05

    Phenomena of synchronized response is common among organs, tissues and cells in biosystems. We have analyzed and discussed three examples of synchronization in biosystems, including the direction-changing movement of paramecia, the prey behavior of flytraps, and the simultaneous discharge of electric eels. These phenomena and discussions support an electrical communication mechanism that in biosystems, the electrical signals are mainly soliton-like electromagnetic pulses, which are generated by the transient transmembrane ionic current through the ion channels and propagate along the dielectric membrane-based softmaterial waveguide network to complete synchronized responses. This transmission model implies that a uniform electrical communication mechanism might have been naturally developed in biosystem. Copyright © 2018 Elsevier Inc. All rights reserved.

  2. Research advances in industrial engineering

    CERN Document Server

    2015-01-01

    This book provides discussions and the exchange of information on principles, strategies, models, techniques, methodologies and applications of industrial engineering. It communicates the latest developments and research activity on industrial engineering and is useful for all those interested in the technological challenges in the field.

  3. Engineering Multiphysics Research

    Directory of Open Access Journals (Sweden)

    Tom Eppes

    2011-05-01

    Full Text Available This paper describes an engineering undergraduate course that covers the methods and techniques of multiphysics modeling. Students become active participants in analysis and discovery by being challenged to solve a sequence of problems related to high priority technology areas. Projects range from power systems and thermal control of habitats to autonomous flight systems and harsh environment electronics. Working in a cooperative learning environment, teams encounter a series of assignments that build on existing skills while gradually expanding their knowledge and expertise in disciplines outside of their own. This project-based approach employs a scaffolding structure with assignments organized in progressively challenging modules supported by mentoring. Each project begins with a problem definition which requires consideration of factors and influences beyond a single discipline. Solution development then moves to setting material properties, boundary constraints and including the necessary physics engines. For many students, this is the first in depth exposure to problems with specialized terminologies, driving equations and limiting conditions. Lastly, solving and post processing are addressed exploring steady state, time-variant, frequency response, optimization and sensitivity methods. The paper discusses the teaching and learning strategies, course structure, outcome assessment and project examples.

  4. Chemical engineering research

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Results of research are reported on hydrodynamics and mass transfer in three-phase fluidized beds. In hydrogen permeation-oxidation studies it was found that at 300 to 500 0 C, and 10-6 oxygen pressure, stainless steel oxidizes 40 to 50 percent of the permeating deuterium. Methods of preparing less than 10-μ sorbent particles were studied using erbium oxide. Adiabatic graphite oxidation studies demonstrated that burning rates are mass transfer controlled, and that the product gas temperature can be controlled by adjusting the recycle gas rate. Apparatus was assembled for evaluation of a perfusion-impactor to remove solid or liquid particles from gas streams. In studies of continuous chromatography the separation of Blue Dextran and CoCl 2 on Spandex G-10 resin was demonstrated

  5. Pedagogical Training and Research in Engineering Education

    Science.gov (United States)

    Wankat, Phillip C.

    2008-01-01

    Ferment in engineering has focused increased attention on undergraduate engineering education, and has clarified the need for rigorous research in engineering education. This need has spawned the new research field of Engineering Education and greatly increased interest in earning Ph.D. degrees based on rigorous engineering education research.…

  6. Engineering research, development and technology

    International Nuclear Information System (INIS)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report

  7. MIT Space Engineering Research Center

    Science.gov (United States)

    Crawley, Edward F.; Miller, David W.

    1990-01-01

    The Space Engineering Research Center (SERC) at MIT, started in Jul. 1988, has completed two years of research. The Center is approaching the operational phase of its first testbed, is midway through the construction of a second testbed, and is in the design phase of a third. We presently have seven participating faculty, four participating staff members, ten graduate students, and numerous undergraduates. This report reviews the testbed programs, individual graduate research, other SERC activities not funded by the Center, interaction with non-MIT organizations, and SERC milestones. Published papers made possible by SERC funding are included at the end of the report.

  8. Global Journal of Engineering Research: Contact

    African Journals Online (AJOL)

    Global Journal of Engineering Research. ... Global Journal of Engineering Research: Contact. Journal Home > About the Journal > Global Journal of Engineering Research: Contact. Log in or Register to get access to full text ... Mailing Address. Department of Petroleum Engineering University of Harcourt NIGERIA ...

  9. Production of biofuels and biochemicals by in vitro synthetic biosystems: Opportunities and challenges.

    Science.gov (United States)

    Zhang, Yi-Heng Percival

    2015-11-15

    The largest obstacle to the cost-competitive production of low-value and high-impact biofuels and biochemicals (called biocommodities) is high production costs catalyzed by microbes due to their inherent weaknesses, such as low product yield, slow reaction rate, high separation cost, intolerance to toxic products, and so on. This predominant whole-cell platform suffers from a mismatch between the primary goal of living microbes - cell proliferation and the desired biomanufacturing goal - desired products (not cell mass most times). In vitro synthetic biosystems consist of numerous enzymes as building bricks, enzyme complexes as building modules, and/or (biomimetic) coenzymes, which are assembled into synthetic enzymatic pathways for implementing complicated bioreactions. They emerge as an alternative solution for accomplishing a desired biotransformation without concerns of cell proliferation, complicated cellular regulation, and side-product formation. In addition to the most important advantage - high product yield, in vitro synthetic biosystems feature several other biomanufacturing advantages, such as fast reaction rate, easy product separation, open process control, broad reaction condition, tolerance to toxic substrates or products, and so on. In this perspective review, the general design rules of in vitro synthetic pathways are presented with eight supporting examples: hydrogen, n-butanol, isobutanol, electricity, starch, lactate,1,3-propanediol, and poly-3-hydroxylbutyrate. Also, a detailed economic analysis for enzymatic hydrogen production from carbohydrates is presented to illustrate some advantages of this system and the remaining challenges. Great market potentials will motivate worldwide efforts from multiple disciplines (i.e., chemistry, biology and engineering) to address the remaining obstacles pertaining to cost and stability of enzymes and coenzymes, standardized building parts and modules, biomimetic coenzymes, biosystem optimization, and scale

  10. FY2012 Engineering Research & Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Monya

    2014-07-22

    This report documents engineering research, development, and technology advancements performed by LLNL during fiscal year 2012 in the following areas: computational engineering, engineering information systems, micro/nano-devices and structures, and measurement technologies.

  11. A framework for systems engineering research

    CSIR Research Space (South Africa)

    Erasmus, L

    2013-08-01

    Full Text Available This presentation discusses a framework which is proposed to perform systems engineering research within South Africa and the necessity for hybrid research methods in systems engineering....

  12. Journal of Civil Engineering Research and Practice

    African Journals Online (AJOL)

    The Journal of Civil Engineering Research and Practice aims to publish original research papers of high standard, containing material of significant contribution to civil engineering, with emphasis being placed on material that is applicable to the solution of practical problems.

  13. Small-Engine Research Laboratory (SERL)

    Data.gov (United States)

    Federal Laboratory Consortium — Description: The Small-Engine Research Laboratory (SERL) is a facility designed to conduct experimental small-scale propulsion and power generation systems research....

  14. Feminist Methodologies and Engineering Education Research

    Science.gov (United States)

    Beddoes, Kacey

    2013-01-01

    This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

  15. Modern mechanical engineering research, development and education

    CERN Document Server

    2014-01-01

    This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

  16. Stirling Laboratory Research Engine: Preprototype configuration report

    Science.gov (United States)

    Hoehn, F. W.

    1982-02-01

    The concept of a simple Stirling research engine that could be used by industrial, university, and government laboratories was studied. The conceptual and final designs, hardware fabrication and the experimental validation of a preprototype stirling laboratory research engine (SLRE) were completed. Also completed was a task to identify the potential markets for research engines of this type. An analytical effort was conducted to provide a stirling cycle computer model. The versatile engine is a horizontally opposed, two piston, single acting stirling engine with a split crankshaft drive mechanism; special instrumentation is installed at all component interfaces. Results of a thermodynamic energy balance for the system are reported. Also included are the engine performance results obtained over a range of speeds, working pressures, phase angles and gas temperatures. The potential for a stirling research engine to support the laboratory requirements of educators and researchers was demonstrated.

  17. Earthquake engineering research program in Chile

    Science.gov (United States)

    Saragoni, G. R.

    1982-01-01

    Earthquake engineering research in Chile has been carried out for more than 30 years. Systematic research is done at the university of Chile in Santiago. Other universities such as the Catholic University, university of Concepcion, and the Federico Santa Maria Technical University have begun to teach and conduct research in earthquake engineering in recent years. 

  18. Framework for systems engineering research

    CSIR Research Space (South Africa)

    Erasmus, L

    2013-08-01

    Full Text Available Issues (Doeben- Henisch, Bauer-Wersing, Erasmus, Schrader & Wagner)  A Theory for the Systems Engineering Process (Erasmus & Doeben-Henisch 2011)  A Theory for Systems Engineering Management (Erasmus & Doeben-Henisch 2011) Classification of Systems...., “Interdisciplinary Engineering of Intelligent Systems. Some Methodological Issues”, in Advances in Modeling Adaptive and Cognitive Systems, Angelo Loula and João Queiroz, eds. pp. 17-30, 2008. E-book at: http://www2.uefs.br/graco/amacs/ Erasmus, L.D., Doeben...

  19. Engineering and Applied Science, Recent Research Reports.

    Science.gov (United States)

    National Science Foundation, Washington, DC. Directorate of Engineering and Applied Science.

    This collection contains abstracts of technical reports and journal articles resulting from research funded by the National Science Foundation. Included in the collection are abstracts arranged in several categories: (1) electrical, computer, and systems engineering; (2) civil and mechanical engineering; (3) applied research; (4) problem-focused…

  20. NASA Propulsion Engineering Research Center, volume 2

    Science.gov (United States)

    1993-01-01

    On 8-9 Sep. 1993, the Propulsion Engineering Research Center (PERC) at The Pennsylvania State University held its Fifth Annual Symposium. PERC was initiated in 1988 by a grant from the NASA Office of Aeronautics and Space Technology as a part of the University Space Engineering Research Center (USERC) program; the purpose of the USERC program is to replenish and enhance the capabilities of our Nation's engineering community to meet its future space technology needs. The Centers are designed to advance the state-of-the-art in key space-related engineering disciplines and to promote and support engineering education for the next generation of engineers for the national space program and related commercial space endeavors. Research on the following areas was initiated: liquid, solid, and hybrid chemical propulsion, nuclear propulsion, electrical propulsion, and advanced propulsion concepts.

  1. Research Trends with Cross Tabulation Search Engine

    Science.gov (United States)

    Yin, Chengjiu; Hirokawa, Sachio; Yau, Jane Yin-Kim; Hashimoto, Kiyota; Tabata, Yoshiyuki; Nakatoh, Tetsuya

    2013-01-01

    To help researchers in building a knowledge foundation of their research fields which could be a time-consuming process, the authors have developed a Cross Tabulation Search Engine (CTSE). Its purpose is to assist researchers in 1) conducting research surveys, 2) efficiently and effectively retrieving information (such as important researchers,…

  2. A Bibliometric Analysis of Climate Engineering Research

    Science.gov (United States)

    Belter, C. W.; Seidel, D. J.

    2013-12-01

    The past five years have seen a dramatic increase in the number of media and scientific publications on the topic of climate engineering, or geoengineering, and some scientists are increasingly calling for more research on climate engineering as a possible supplement to climate change mitigation and adaptation strategies. In this context, understanding the current state of climate engineering research can help inform policy discussions and guide future research directions. Bibliometric analysis - the quantitative analysis of publications - is particularly applicable to fields with large bodies of literature that are difficult to summarize by traditional review methods. The multidisciplinary nature of the published literature on climate engineering makes it an ideal candidate for bibliometric analysis. Publications on climate engineering are found to be relatively recent (more than half of all articles during 1988-2011 were published since 2008), include a higher than average percentage of non-research articles (30% compared with 8-15% in related scientific disciplines), and be predominately produced by countries located in the Northern Hemisphere and speaking English. The majority of this literature focuses on land-based methods of carbon sequestration, ocean iron fertilization, and solar radiation management and is produced with little collaboration among research groups. This study provides a summary of existing publications on climate engineering, a perspective on the scientific underpinnings of the global dialogue on climate engineering, and a baseline for quantitatively monitoring the development of climate engineering research in the future.

  3. Alternative Fuels DISI Engine Research ? Autoignition Metrics.

    Energy Technology Data Exchange (ETDEWEB)

    Sjoberg, Carl Magnus Goran [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vuilleumier, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-02-01

    Improved engine efficiency is required to comply with future fuel economy standards. Alternative fuels have the potential to enable more efficient engines while addressing concerns about energy security. This project contributes to the science base needed by industry to develop highly efficient direct injection spark igniton (DISI) engines that also beneficially exploit the different properties of alternative fuels. Here, the emphasis is on quantifying autoignition behavior for a range of spark-ignited engine conditions, including directly injected boosted conditions. The efficiency of stoichiometrically operated spark ignition engines is often limited by fuel-oxidizer end-gas autoignition, which can result in engine knock. A fuel’s knock resistance is assessed empirically by the Research Octane Number (RON) and Motor Octane Number (MON) tests. By clarifying how these two tests relate to the autoignition behavior of conventional and alternative fuel formulations, fuel design guidelines for enhanced engine efficiency can be developed.

  4. Is Engineering Design Disappearing from Design Research?

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Howard, Thomas J.

    2011-01-01

    Most systems and products need to be engineered during their design, based upon scientific insight into principles, mechanisms, materials and production pos-sibilities, leading to reliability, durability and value for the user. Despite the central importance and design’s crucial dependency...... on engineer-ing, we observe a declining focus on engineering design in design research, articu-lated in the composition of contributions to Design Society conferences. Engineer-ing design relates closely to the ‘materialisation’ of products and systems, i.e. the embodiment and detailing. The role of clever...... materialisation is enormous where poor engineering will often manifest in a multitude of consequences for down-stream activities. In this article we will draw a picture of what happens in the embodiment phase of designing, try to create an overview of current understandings and sum up the challenges of proper...

  5. Domain Engineering - A Software Engineering discipline in Need of Research

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2000-01-01

    , and these again seem more stable than software designs. Thus, almost like the universal laws of physics, it pays off to first develop theories of domains. But domain engineering, as in fact also requirements engineering, really is in need of thoroughly researched development principles, techniques and tools....... The aim of this paper is to advocate: that researchers study these development method components, and that universities focus their education on basing well-nigh any course on the use of formal techniques: Specification and verification, and that software engineers take heed: Start applying formal......Before software can be developed its requirements must be stated. Before requirements can be expressed the application domain must be understood. In this paper we outline some of the basic facets of domain engineering. Domains seem, it is our experience, far more stable than computing requirements...

  6. Domain Engineering, A Software Engineering Discipline in Need of Research

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2000-01-01

    Before software can be developed its requirements must be stated. Before requirements can be expressed the application domain must be understood. In this paper we outline some of the basic facets of domain engineering. Domains seem, it is our experience, far more stable than computing requirements......, and these again seem more stable than software designs. Thus, almost like the universal laws of physics, it pays off to first develop theories of domains. But domain engineering, as in fact also requirements engineering, really is in need of thoroughly researched development principles, techniques and tools....... The aim of this paper is to advocate: that researchers study these development method components, and that universities focus their education on basing well-nigh any course on the use of formal techniques: Specification and verification, and that software engineers take heed: Start applying formal...

  7. Summaries of FY 1994 engineering research

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report documents the Basic Energy Sciences Engineering Research Program for fiscal year 1994; it provides a summary of each of the program projects in addition to a brief program overview. The report is intended to provide staff of Congressional committees, other executive departments, and other DOE offices with substantive program information so as to facilitate governmental overview and coordination of Federal research programs. Of equal importance, its availability facilitates communication of program information to interested research engineers and scientists.

  8. Summaries of FY 1994 engineering research

    International Nuclear Information System (INIS)

    1994-12-01

    This report documents the Basic Energy Sciences Engineering Research Program for fiscal year 1994; it provides a summary of each of the program projects in addition to a brief program overview. The report is intended to provide staff of Congressional committees, other executive departments, and other DOE offices with substantive program information so as to facilitate governmental overview and coordination of Federal research programs. Of equal importance, its availability facilitates communication of program information to interested research engineers and scientists

  9. Ten recommendations for software engineering in research.

    Science.gov (United States)

    Hastings, Janna; Haug, Kenneth; Steinbeck, Christoph

    2014-01-01

    Research in the context of data-driven science requires a backbone of well-written software, but scientific researchers are typically not trained at length in software engineering, the principles for creating better software products. To address this gap, in particular for young researchers new to programming, we give ten recommendations to ensure the usability, sustainability and practicality of research software.

  10. Mechanical Engineering Department engineering research: Annual report, FY 1986

    International Nuclear Information System (INIS)

    Denney, R.M.; Essary, K.L.; Genin, M.S.; Highstone, H.H.; Hymer, J.D.; Taft, S.O.

    1986-12-01

    This report provides information on the five areas of research interest in LLNL's Mechanical Engineering Department. In Computer Code Development, a solid geometric modeling program is described. In Dynamic Systems and Control, structure control and structure dynamics are discussed. Fabrication technology involves machine cutting, interferometry, and automated optical component manufacturing. Materials engineering reports on composite material research and measurement of molten metal surface properties. In Nondestructive Evaluation, NMR, CAT, and ultrasound machines are applied to manufacturing processes. A model for underground collapse is developed. Finally, an alternative heat exchanger is investigated for use in a fusion power plant. Separate abstracts were prepared for each of the 13 reports in this publication

  11. Innovation and Research on Engineering Education

    DEFF Research Database (Denmark)

    de Graaff, Erik; Kolmos, Anette

    2014-01-01

    is obsolete by the time the enter practice. Recognition of these issues has recently resulted in worldwide increase of attention for innovation of engineering education. This chapter presents a brief outline of the traditions in higher engineering education culminating in the stage of research and development......Our Western society depends strongly on continuous technological innovation. Engineers, the designers of the future technology need extensive competencies to face the challenge of dealing with ever increasing complexity. In some areas more than half the knowledge they learn in University...... in the last century. Next, the recent revival of engineering education research is described, contrasting the developments in the USA with Europe and the rest of the world. The efforts in the USA appear to follow Boyer’s concept scholarship of teaching, and aim for the establishment of engineering education...

  12. Cryogenics Research and Engineering Experience

    Science.gov (United States)

    Toro Medina, Jaime A.

    2013-01-01

    Energy efficient storage, transfer and use of cryogens and cryogenic propellants on Earth and in space have a direct impact on NASA, government and commercial programs. Research and development on thermal insulation, propellant servicing, cryogenic components, material properties and sensing technologies provides industry, government and research institutions with the cross-cutting technologies to manage low-temperature applications. Under the direction of the Cryogenic Testing Lab at Kennedy Space Center, the work experience acquired allowed me to perform research, testing, design and analysis of current and future cryogenic technologies to be applied in several projects.

  13. Summaries of FY 1991 engineering research

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This report documents the BES Engineering Research Program for fiscal year 1991; it provides a summary for each of the program projects in addition to a brief program overview. The report is intended to provide staff of Congressional committees, other executive departments, and other DOE offices with substantive program information so as to facilitate governmental overview and coordination of Federal research programs. Of equal importance, its availability facilitates communication of program information to interested research engineers and scientists. The organizational chart for the DOE Office of Energy Research (OER) delineates the six Divisions within the OER Office of Basic Energy Sciences (BES). Each BES Division administers basic, mission oriented research programs in the area indicated by its title. The BES Engineering Research Program is one such program; it is administered by the Engineering and Geosciences Division of BES. In preparing this report we asked the principal investigators to submit summaries for their projects that were specifically applicable to fiscal year 1991. Major topics covered include fluid mechanics, fracture mechanics, chemical engineering and mechanical engineering.

  14. Detonation Engine Research Facility (DERF)

    Data.gov (United States)

    Federal Laboratory Consortium — Description: This facility is configured to safely conduct experimental pressuregain combustion research. The DERF is capable of supporting up to 60,000 lbf thrust...

  15. Electronics engineering research proposals for FY78

    International Nuclear Information System (INIS)

    Cleland, L.L.; Ekstrom, M.P.; Miller, E.K.

    1977-01-01

    Since most of the Electronics Engineering Research expenditures are in the Engineering Research Division (ERD), the two are inseparable when discussing plans. A reorganization of ERD aimed at further expanding LLL capabilities and being more responsive to LLL needs is now complete. Six discipline related groups constitute the research elements in ERD. Three groups remained unchanged, one group was modified slightly, two groups were added, and one group was dissolved. The technical activities of each of the six research-oriented groups within ERD are reported

  16. Biomedical engineering for health research and development.

    Science.gov (United States)

    Zhang, X-Y

    2015-01-01

    Biomedical engineering is a new area of research in medicine and biology, providing new concepts and designs for the diagnosis, treatment and prevention of various diseases. There are several types of biomedical engineering, such as tissue, genetic, neural and stem cells, as well as chemical and clinical engineering for health care. Many electronic and magnetic methods and equipments are used for the biomedical engineering such as Computed Tomography (CT) scans, Magnetic Resonance Imaging (MRI) scans, Electroencephalography (EEG), Ultrasound and regenerative medicine and stem cell cultures, preparations of artificial cells and organs, such as pancreas, urinary bladders, liver cells, and fibroblasts cells of foreskin and others. The principle of tissue engineering is described with various types of cells used for tissue engineering purposes. The use of several medical devices and bionics are mentioned with scaffold, cells and tissue cultures and various materials are used for biomedical engineering. The use of biomedical engineering methods is very important for the human health, and research and development of diseases. The bioreactors and preparations of artificial cells or tissues and organs are described here.

  17. Reengineering Biomedical Translational Research with Engineering Ethics.

    Science.gov (United States)

    Sunderland, Mary E; Nayak, Rahul Uday

    2015-08-01

    It is widely accepted that translational research practitioners need to acquire special skills and knowledge that will enable them to anticipate, analyze, and manage a range of ethical issues. While there is a small but growing literature that addresses the ethics of translational research, there is a dearth of scholarship regarding how this might apply to engineers. In this paper we examine engineers as key translators and argue that they are well positioned to ask transformative ethical questions. Asking engineers to both broaden and deepen their consideration of ethics in their work, however, requires a shift in the way ethics is often portrayed and perceived in science and engineering communities. Rather than interpreting ethics as a roadblock to the success of translational research, we suggest that engineers should be encouraged to ask questions about the socio-ethical dimensions of their work. This requires expanding the conceptual framework of engineering beyond its traditional focus on "how" and "what" questions to also include "why" and "who" questions to facilitate the gathering of normative, socially-situated information. Empowering engineers to ask "why" and "who" questions should spur the development of technologies and practices that contribute to improving health outcomes.

  18. FY08 Engineering Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; McNichols, D

    2009-02-24

    This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technology development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

  19. Tracking Engineering Education Research and Development

    Directory of Open Access Journals (Sweden)

    Bill Williams

    2012-04-01

    Full Text Available In recent years, bibliometric analysis of publications has been receiving growing attention in engineering education research as an approach that can bring a number of benefits. In this paper two such forms, taxonomical analysis and citation analysis, are applied to papers from the first 2011 number of IEEE Transactions on Education (21 papers and from the two 2011 numbers of the ASEE-published Advances in Engineering Education (22 papers. In the former approach, seven taxonomical dimensions are used to characterize the papers and in the second the references cited in the 43 papers were studied so as to analyze how the researchers were informed by previous studies.The results suggest that the silo effect identified by Wankat for disciplinary engineering education journals in 2009 was still apparent in the IEEE Transactions on Education in 2011. The Advances in Engineering Education papers show a wide range of cited references, including reference disciplines outside of engineering education, and this suggests that research published there is likely to be informed by a broad range of previous studies which may be interpreted as a sign of a growing maturity of engineering education as a research discipline.

  20. Nanoscale Science, Engineering and Technology Research Directions

    Energy Technology Data Exchange (ETDEWEB)

    Lowndes, D. H.; Alivisatos, A. P.; Alper, M.; Averback, R. S.; Jacob Barhen, J.; Eastman, J. A.; Imre, D.; Lowndes, D. H.; McNulty, I.; Michalske, T. A.; Ho, K-M; Nozik, A. J.; Russell, T. P.; Valentin, R. A.; Welch, D. O.; Barhen, J.; Agnew, S. R.; Bellon, P.; Blair, J.; Boatner, L. A.; Braiman, Y.; Budai, J. D.; Crabtree, G. W.; Feldman, L. C.; Flynn, C. P.; Geohegan, D. B.; George, E. P.; Greenbaum, E.; Grigoropoulos, C.; Haynes, T. E.; Heberlein, J.; Hichman, J.; Holland, O. W.; Honda, S.; Horton, J. A.; Hu, M. Z.-C.; Jesson, D. E.; Joy, D. C.; Krauss, A.; Kwok, W.-K.; Larson, B. C.; Larson, D. J.; Likharev, K.; Liu, C. T.; Majumdar, A.; Maziasz, P. J.; Meldrum, A.; Miller, J. C.; Modine, F. A.; Pennycook, S. J.; Pharr, G. M.; Phillpot, S.; Price, D. L.; Protopopescu, V.; Poker, D. B.; Pui, D.; Ramsey, J. M.; Rao, N.; Reichl, L.; Roberto, J.; Saboungi, M-L; Simpson, M.; Strieffer, S.; Thundat, T.; Wambsganss, M.; Wendleken, J.; White, C. W.; Wilemski, G.; Withrow, S. P.; Wolf, D.; Zhu, J. H.; Zuhr, R. A.; Zunger, A.; Lowe, S.

    1999-01-01

    This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry.

  1. A Research Agenda for Security Engineering

    Directory of Open Access Journals (Sweden)

    Rich Goyette

    2013-08-01

    Full Text Available Despite nearly 30 years of research and application, the practice of information system security engineering has not yet begun to exhibit the traits of a rigorous scientific discipline. As cyberadversaries have become more mature, sophisticated, and disciplined in their tradecraft, the science of security engineering has not kept pace. The evidence of the erosion of our digital security – upon which society is increasingly dependent – appears in the news almost daily. In this article, we outline a research agenda designed to begin addressing this deficit and to move information system security engineering toward a mature engineering discipline. Our experience suggests that there are two key areas in which this movement should begin. First, a threat model that is actionable from the perspectives of risk management and security engineering should be developed. Second, a practical and relevant security-measurement framework should be developed to adequately inform security-engineering and risk-management processes. Advances in these areas will particularly benefit business/government risk assessors as well as security engineers performing security design work, leading to more accurate, meaningful, and quantitative risk analyses and more consistent and coherent security design decisions. Threat modelling and security measurement are challenging activities to get right – especially when they need to be applied in a general context. However, these are decisive starting points because they constitute the foundation of a scientific security-engineering practice. Addressing these challenges will require stronger and more coherent integration between the sub-disciplines of risk assessment and security engineering, including new tools to facilitate that integration. More generally, changes will be required in the way security engineering is both taught and practiced to take into account the holistic approach necessary from a mature, scientific

  2. Biomedical engineering frontier research and converging technologies

    CERN Document Server

    Jun, Ho-Wook; Shin, Jennifer; Lee, SangHoon

    2016-01-01

    This book provides readers with an integrative overview of the latest research and developments in the broad field of biomedical engineering. Each of the chapters offers a timely review written by leading biomedical engineers and aims at showing how the convergence of scientific and engineering fields with medicine has created a new basis for practically solving problems concerning human health, wellbeing and disease. While some of the latest frontiers of biomedicine, such as neuroscience and regenerative medicine, are becoming increasingly dependent on new ideas and tools from other disciplines, the paradigm shift caused by technological innovations in the fields of information science, nanotechnology, and robotics is opening new opportunities in healthcare, besides dramatically changing the ways we actually practice science. At the same time, a new generation of engineers, fluent in many different scientific “languages,” is creating entirely new fields of research that approach the “old” questions f...

  3. Council of Energy Engineering Research. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, Richard J.

    2003-08-22

    The Engineering Research Program, a component program of the DOE Office of Basic Energy Sciences (BES), was established in 1979 to aid in resolving the numerous engineering issues arising from efforts to meet U.S. energy needs. The major product of the program became part of the body of knowledge and data upon which the applied energy technologies are founded; the product is knowledge relevant to energy exploration, production, conversion and use.

  4. Electronics Engineering Research. Final report, FY 1979

    International Nuclear Information System (INIS)

    Weissenberger, S.

    1980-01-01

    Accomplishments in Electronics Engineering Research (EER) during FY79 spanned a broad range of technologies, from high-speed microelectronics to digital image enhancement; from underground probing with electromagnetic waves to detecting neutrons with a small solid-state device; and from computer systems to aid engineers, to software tools to aid programmers. This report describes the overall EER program and its objectives, summarizes progress made in FY79, and outlines plans for FY80

  5. Electronics Engineering Research. Final report, FY 1979

    Energy Technology Data Exchange (ETDEWEB)

    Weissenberger, S. (ed.)

    1980-01-01

    Accomplishments in Electronics Engineering Research (EER) during FY79 spanned a broad range of technologies, from high-speed microelectronics to digital image enhancement; from underground probing with electromagnetic waves to detecting neutrons with a small solid-state device; and from computer systems to aid engineers, to software tools to aid programmers. This report describes the overall EER program and its objectives, summarizes progress made in FY79, and outlines plans for FY80.

  6. Aircraft Turbine Engine Control Research at NASA Glenn Research Center

    Science.gov (United States)

    Garg, Sanjay

    2014-01-01

    This lecture will provide an overview of the aircraft turbine engine control research at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC). A brief introduction to the engine control problem is first provided with a description of the current state-of-the-art control law structure. A historical aspect of engine control development since the 1940s is then provided with a special emphasis on the contributions of GRC. The traditional engine control problem has been to provide a means to safely transition the engine from one steady-state operating point to another based on the pilot throttle inputs. With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch (CDB) at GRC is leading and participating in various projects in partnership with other organizations within GRC and across NASA, other government agencies, the U.S. aerospace industry, and academia to develop advanced propulsion controls and diagnostics technologies that will help meet the challenging goals of NASA programs under the Aeronautics Research Mission. The second part of the lecture provides an overview of the various CDB technology development activities in aircraft engine control and diagnostics, both current and some accomplished in the recent past. The motivation for each of the research efforts, the research approach, technical challenges and the key progress to date are summarized. The technologies to be discussed include system level engine control concepts, gas path diagnostics, active component control, and distributed engine control architecture. The lecture will end with a futuristic perspective of how the various current technology developments will lead to an Intelligent and Autonomous Propulsion System requiring none to very minimum pilot interface

  7. Mechanical Engineering Department engineering research: Annual report, FY 1986

    Energy Technology Data Exchange (ETDEWEB)

    Denney, R.M.; Essary, K.L.; Genin, M.S.; Highstone, H.H.; Hymer, J.D.; Taft, S.O. (eds.)

    1986-12-01

    This report provides information on the five areas of research interest in LLNL's Mechanical Engineering Department. In Computer Code Development, a solid geometric modeling program is described. In Dynamic Systems and Control, structure control and structure dynamics are discussed. Fabrication technology involves machine cutting, interferometry, and automated optical component manufacturing. Materials engineering reports on composite material research and measurement of molten metal surface properties. In Nondestructive Evaluation, NMR, CAT, and ultrasound machines are applied to manufacturing processes. A model for underground collapse is developed. Finally, an alternative heat exchanger is investigated for use in a fusion power plant. Separate abstracts were prepared for each of the 13 reports in this publication. (JDH)

  8. Summaries of FY 1993 Engineering Research

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This report documents the BES Engineering Research Program for fiscal year 1993; it provides a summary for each of the program projects in addition to a brief program overview. The report is intended to provide staff of Congressional committees, other executive departments, and other DOE offices with substantive program information so as to facilitate governmental overview and coordination of Federal research programs. Of equal importance, its availability facilitates communication of program information to interested research engineers and scientists. The organizational chart for the DOE Office of Energy Research (OER) on the next page delineates the six Divisions within the OER Office of Basic Energy Sciences (BES). Each BES Division administers basic, mission oriented research programs in the area indicated by its title. The BES Engineering Research Program is one such program; it is administered by the Engineering and Geosciences Division of BES. In preparing this report we asked the principal investigators to submit summaries for their projects that were specifically applicable to fiscal year 1993. The summaries received have been edited if necessary.

  9. Summaries of FY 1996 engineering research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report documents the Basic Energy Sciences (BES) Engineering Research Program for fiscal year 1996; it provides a summary for each of the program projects in addition to a brief program overview. The report is intended to provide staff of Congressional committees, other executive departments, and other DOE offices with substantive program information so as to facilitate governmental overview and coordination of Federal research programs. Of equal importance, its availability facilitates communication of program information to interested research engineers and scientists. Each BES Division administers basic, mission oriented research programs in the area indicated by its title. The BES Engineering Research Program is one such program; it is administered by the Engineering and Geosciences Division of BES. In preparing this report the principal investigators were asked to submit summaries for their projects that were specifically applicable to fiscal year 1996. The summaries received have been edited if necessary, but the press for timely publication made it impractical to have the investigators review and approve the revised summaries prior to publication. For more information about a given project, it is suggested that the investigators be contacted directly.

  10. Using ethnographic methods in software engineering research

    DEFF Research Database (Denmark)

    Sharp, Helen, C.; Dittrich, Yvonne; De Souza, Cleidson

    2010-01-01

    This tutorial provides an overview of the role of ethnography in Software Engineering research. It describes the use of ethnographic methods as a means to provide an in-depth understanding of the socio-technological realities surrounding everyday software development practice. The knowledge gained...... can be used to improve processes, methods and tools as well as develop observed industrial practices. The tutorial begins with a brief historical account of ethnography in the fields of Software Engineering, CSCW, Information Systems and other related areas. This sets the stage for a more in......-depth discussion of methods for data collection and analysis used in ethnographic studies. It then describes how these methods can be and have been used by software engineering researchers to understand developers' work practices, to inform the development of processes, methods and tools and to evaluate...

  11. An initial bibliometric analysis and mapping of systems engineering research

    CSIR Research Space (South Africa)

    Oosthuizen, Rudolph

    2016-07-01

    Full Text Available Systems engineering is still a growing field that depends on continuous research to develop and mature. Research in systems engineering is difficult and the classic approaches for other engineering disciplines may not be sufficient. Additional...

  12. Engineering sciences research highlights. Fiscal year 1983

    International Nuclear Information System (INIS)

    Tucker, E.F.; Dobratz, B.

    1984-05-01

    The Laboratory's overall mission is sixfold. We are charged with developing nuclear warheads for defense, technology for arms control, and new concepts for defense against nuclear attack; with supporting programs for both nonnuclear defense and energy research and development; and with advancing our knowledge of science and technology so that we can respond to other national needs. Major programs in support of this mission involve nuclear weapons, energy, environmental science, and basic research. Specific areas of investigation include the design, development, and testing of nuclear weapons; nuclear safeguards and security; inertial and magnetic fusion and nuclear, solar, fossil, and geothermal energy; and basic research in physics, chemistry, mathematics, engineering, and the computer and life sciences. With the staff and facilities maintained for these and other programs, the Laboratory can respond to specific national needs in virtually all areas of the physical and life sciences. Within the Laboratory's organization, most technical research activities are carried out in three directorates: Engineering Sciences; Physics and Mathematics; and Chemistry, Earth and Life Sciences. The activities highlighted here are examples of unclassified work carried out in the seven divisions that made up the Engineering Sciences Directorate at the end of fiscal year 1983. Brief descriptions of these divisions' goals and capabilities and summaries of selected projects illustrate the diversity of talent, expertise, and facilities maintained within the Engineering Sciences Directorate

  13. Engineering Education in Research-Intensive Universities

    Science.gov (United States)

    Alpay, E.; Jones, M. E.

    2012-01-01

    The strengths and weaknesses of engineering education in research-intensive institutions are reported and key areas for developmental focus identified. The work is based on a questionnaire and session summaries used during a two-day international conference held at Imperial College London. The findings highlight several common concerns, such as…

  14. Evaluation of Research in Engineering Science in Norway

    DEFF Research Database (Denmark)

    Van Brussel, Hendrik Van Brussel; Lindberg, Bengt; Cederwall, Klas

    This report presents the conclusions of Panel 1: Construction engineering, Production and Operation. The Research Council of Norway (NFR) appointed three expert panels to evaluate Research in Engineering Science in Norway .......This report presents the conclusions of Panel 1: Construction engineering, Production and Operation. The Research Council of Norway (NFR) appointed three expert panels to evaluate Research in Engineering Science in Norway ....

  15. Proceedings of the 8. International Symposium on Microbial Ecology : microbial biosystems : new frontiers

    International Nuclear Information System (INIS)

    Bell, C.R.; Brylinsky, M.; Johnson-Green, P.

    2000-01-01

    A wide range of disciplines were presented at this conference which reflected the importance of microbial ecology and provided an understanding of the factors that determine the growth and activities of microorganisms. The conference attracted 1444 delegates from 54 countries. The research emerging from the rapidly expanding frontier of microbial ecosystems was presented in 62 oral presentation and 817 poster presentations. The two volumes of these proceedings presented a total of 27 areas in microbial ecology, some of which included terrestrial biosystems, aquatic, estuarine, surface and subsurface microbial ecology. Other topics included bioremediation, microbial ecology in industry and microbial ecology of oil fields. Some of the papers highlighted the research that is underway to determine the feasibility of using microorganisms for enhanced oil recovery (EOR). Research has shown that microbial EOR can increase production at lower costs than conventional oil recovery. The use of bacteria has also proven to be a feasible treatment method in the biodegradation of hydrocarbons associated with oil spills. refs., tabs., figs

  16. Original Research Original Research

    African Journals Online (AJOL)

    RAGHAVENDRA

    University of Ilorin, PMB .2 Department of Mechanical Engineering, Facu. PMB 1515, Ilo. Abstract ... ltural and Biosystems Engineering, Faculty of Engineering and Technology. University of Ilorin, PMB 1515, Ilorin, Kwara State, ... food, agricultural and other biological materials important when dealing with stress distribution ...

  17. Final Report: Performance Engineering Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

    2014-10-27

    This document is a final report about the work performed for cooperative agreement DE-FC02-06ER25764, the Rice University effort of Performance Engineering Research Institute (PERI). PERI was an Enabling Technologies Institute of the Scientific Discovery through Advanced Computing (SciDAC-2) program supported by the Department of Energy's Office of Science Advanced Scientific Computing Research (ASCR) program. The PERI effort at Rice University focused on (1) research and development of tools for measurement and analysis of application program performance, and (2) engagement with SciDAC-2 application teams.

  18. Converging clinical and engineering research on neurorehabilitation

    CERN Document Server

    Torricelli, Diego; Pajaro, Marta

    2013-01-01

    Restoring human motor and cognitive function has been a fascinating research area during the last century. Interfacing the human nervous system with electro-mechanical rehabilitation machines is facing its crucial passage from research to clinical practice, enhancing the potentiality of therapists, clinicians and researchers to rehabilitate, diagnose and generate knowledge. The 2012 International Conference on Neurorehabilitation (ICNR2012, www.icnr2012.org) brings together researchers and students from the fields of Clinical Rehabilitation, Applied Neurophysiology and Biomedical Engineering, covering a wide range of research topics:   · Clinical Impact of Technology · Brain-Computer Interface in Rehabilitation · Neuromotor & Neurosensory modeling and processing · Biomechanics in Rehabilitation · Neural Prostheses in Rehabilitation · Neuro-Robotics in Rehabilitation · Neuromodulation   This Proceedings book includes general contributions from oral and poster sessions, as well as from special sess...

  19. 77 FR 52701 - Board on Coastal Engineering Research

    Science.gov (United States)

    2012-08-30

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting.... Army Engineer Research and Development Center, Waterways Experiment Station, 3909 Halls Ferry Road...

  20. COLLABORATION IN SOUTH AFRICAN ENGINEERING RESEARCH

    Directory of Open Access Journals (Sweden)

    R. Sooryamoorthy

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: The production of scientific publications in engineering in South Africa has expanded over the last three decades. Because engineering is an important science, this expansion has implications for the growth and development of the economy. Drawing on a sample range of years of the publications stored in the ISI Web of Knowledge, the engineering publications of South Africans for a 30-year period from 1975-2005 are analysed. This analysis shows that the production of scientific publications in engineering by South African researchers has increased during the analysed period; that the number of researchers per publication has grown; that the number of countries collaborating with South Africa has increased; and that the number of sole-authored papers has decreased. Domestic collaboration (between researchers within South Africa has decreased, while international collaboration has grown considerably. The key objective of the paper is to find out whether the production of publications is related to the level of collaboration, and to see how collaboration can be regressed from other known variables. It is clear from the study that collaboration is a decisive factor in the production of scientific publications in engineering in South Africa.

    AFRIKAANSE OPSOMMING Die produksie van wetenskaplike publikasies in ingenieurswese in Suid-Afrika het oor die afgelope drie dekades toegeneem. Aangesien ingenieurswese ‘n belangrike wetenskap is, beïnvloed dié toename die groei en ontwikkeling van die ekonomie. Deur na ‘n monster van voormalige publikasies op die “ISI Web of Science” te kyk, is die publikasies in ingenieurswese deur Suid-Afrikaners oor ‘n 30 jaar periode van 1975-2005 geanaliseer. Die analise toon dat die produksie van wetenskaplike publikasies in ingenieurswese deur Suid-Afrikaanse navorsers toegeneem het oor dié tydperk; dat die aantal navorsers per publikasie gegroei het; dat daar ‘n toename was in die

  1. Summaries of FY 1997 engineering research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This report documents the Basic Energy Sciences (BES) Engineering Research Program for fiscal year 1997, it provides a summary for each of the program projects in addition to a brief program overview. The report is intended to provide staff of Congressional committees, other executive departments, and other DOE offices with substantive program information so as to facilitate governmental overview and coordination of Federal research programs. Of equal importance, its availability facilitates communication of program information to interested research engineers and scientists. The individual project summaries follow the program overview. The summaries are ordered alphabetically by name of institution; the table of contents lists all the institutions at which projects were sponsored in fiscal year 1997. Each project entry begins with an institutional-departmental heading. The names of investigators are listed immediately below the title. The funding level for fiscal year 1997 appears to the right of address. The summary description of the project completes the entry. A separate index of Principal Investigators includes phone number, fax number and e-main address, where available.

  2. Screening candidate systems engineers: a research design

    CSIR Research Space (South Africa)

    Goncalves, DP

    2009-07-01

    Full Text Available engineering screening methodology that could be used to screen potential systems engineers. According to their design, this can be achieved by defining a system engineering profile according to specific psychological attributes, and using this profile...

  3. Drastic reformation of Electrical and Electronics Engineering Laboratory(Researches)

    OpenAIRE

    青柳, 稔; Minoru, Aoyagi

    2016-01-01

    The Department of Electrical and Electronic Engineering opened in 1978, as the Department of Electrical Engineering. In 1987, the Department of Electrical Engineering was renamed the Department of Electrical and Electronic Engineering. The Department of Electrical and Electronic Engineering has conducted basic educations and studies on electric and electronic engineering. In this paper, I will introduce an overview of recent researches and educations of the Department of Ele ctrical and Elect...

  4. Research and development in power plant engineering

    International Nuclear Information System (INIS)

    Riedle, K.; Taud, R.

    2001-01-01

    Research and development are a bridge for visions that are escorted to a successful market introduction. Also in power plant engineering, research and development are a lever with which the product power plant, its technology and processes can be adapted to the quickly changing future market. In the overview given by this paper, therefore at first the development boosters and targets are outlined from the viewpoint of the market; then the available technology portfolio is addressed in a concise way. Targets for the development can be seen from the support programmes of the governments. Before a preview is given, some development topics from the point of view of the manufacturer are introduced. (orig.) [de

  5. 77 FR 14462 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2012-03-09

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development.... Name: Research, Engineering & Development Advisory Committee. Time and Date: April 18, 2012--9:30 a.m...

  6. 78 FR 47049 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-08-02

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development...; 5 U.S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and.... Name: Research, Engineering & Development Advisory Committee. Time and Date: September 18--8:30 a.m. to...

  7. 77 FR 54648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2012-09-05

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. TIME AND DATE: September 26, 2012--9 a.m. to 4 p.m...

  8. 76 FR 12404 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-03-07

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. Time and Date: April 20, 2011--9:30 a.m. to 4 p.m...

  9. 75 FR 14243 - Research, Engineering And Development Advisory Committee

    Science.gov (United States)

    2010-03-24

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering And Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. Time and Date: April 21, 2010--9 a.m. to 5 p.m...

  10. 76 FR 44648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-07-26

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development.... Name: Research, Engineering & Development Advisory Committee. Time and Date: September 21, 2011--9 a.m...

  11. 78 FR 16357 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-03-14

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development... hereby given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: April 24--8:30 a.m. to 4...

  12. NASA Research Bearing on Jet Engine Reliability

    Science.gov (United States)

    Mason, S. S.; Ault, G. M.; Pinkel, B.

    1959-01-01

    Turbojet engine reliability has long been an intense interest to the military users of this type of aircraft propulsion. With the recent inauguration of commercial jet transport this subject has assumed a new dimension of importance. In January l96 the Lewis Research Center of the NASA (then the MACA) published the results of an extensive study on the factors that affect the opera- center dot tional reliability of turbojet engines (ref. 1). At that time the report was classified Confidential. In July l98 this report was declassified. It is thus appropriate at this time to present some of the highlights of the studies described in the NASA report. In no way is it intended to outline the complete contents of the report; rather it is hoped to direct attention to it among those who are center dot directly concerned with this problem. Since the publication of our study over three years ago, the NASA has completed a number of additional investigations that bear significantly on this center dot subject. A second object of this paper, therefore, is to summarize the results of these recent studies and to interpret their significance in relation to turbojet operational reliability.

  13. Engineered cell lines for fish health research.

    Science.gov (United States)

    Collet, Bertrand; Collins, Catherine; Lester, Katherine

    2018-03-01

    As fish farming continues to increase worldwide, the related research areas of fish disease and immunology are also expanding, aided by the revolution in access to genomic information and molecular technology. The genomes of most fish species of economic importance are now available and annotation based on sequence homology with characterised genomes is underway. However, while useful, functional homology is more difficult to determine, there being a lack of widely distributed and well characterised reagents such as monoclonal antibodies, traditionally used in mammalian studies, to help with confirming functions and cellular interactions of fish molecules. In this context, fish cell lines and the possibility of their genetic engineering offer good prospects for studying functional genomics with respect to fish diseases. In this review, we will give an overview of available permanently genetically engineered fish cell lines, as cell-based reporter systems or platforms for expression of endogenous immune or pathogen genes, to investigate interactions and function. The advantages of such systems and the technical challenge for their development will be discussed. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  14. Armstrong Flight Research Center Research Technology and Engineering Report 2015

    Science.gov (United States)

    Voracek, David F.

    2016-01-01

    I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

  15. The Atlantic rift in Engineering Education Research Methodology

    DEFF Research Database (Denmark)

    de Graaff, Erik

    2015-01-01

    engineering. A revival of engineering education research started in the USA around the turn of the century. Building on the concept of ‘scholarship of teaching’, engineers were challenged to investigate their own role as educators. Since these researchers have their academic background mostly in engineering...... and science, they tend to aim for ‘rigorous research’ according to the natural sciences. Worldwide the engineering education community has recognized the need to blend both the social sciences research approach and rigorous research. This paper explores the variation in research methods used by researchers...... publishing in the European Journal of Engineering Education, aiming to identify a shift in methods used for engineering education research....

  16. UPS fellowships support creative engineering research

    OpenAIRE

    Crumbley, Liz

    2007-01-01

    A new $40,000 grant marks the 11th anniversary of support from the United Parcel Service (UPS) Foundation for doctoral fellowships in the Human Factors and Safety Engineering Graduate Program in the Grado Department of Industrial and Systems Engineering (ISE) in the College of Engineering.

  17. Biomedical engineering research at DOE national labs

    International Nuclear Information System (INIS)

    None

    1999-01-01

    Biomedical Engineering is the application of principles of physics, chemistry, nd engineering to problems of human health. The National Laboratories of the U.S. Department of Energy have been leaders in this scientific field since 1947. This inventory of their biomedical engineering projects was compiled in January 1999

  18. Human subject research for engineers a practical guide

    CERN Document Server

    de Winter, Joost C F

    2017-01-01

    This Brief introduces engineers to the main principles in ethics, research design, statistics, and publishing of human subject research. In recent years, engineering has become strongly connected to disciplines such as biology, medicine, and psychology. Often, engineers (and engineering students) are expected to perform human subject research. Typical human subject research topics conducted by engineers include human-computer interaction (e.g., evaluating the usability of software), exoskeletons, virtual reality, teleoperation, modelling of human behaviour and decision making (often within the framework of ‘big data’ research), product evaluation, biometrics, behavioural tracking (e.g., of work and travel patterns, or mobile phone use), transport and planning (e.g., an analysis of flows or safety issues), etc. Thus, it can be said that knowledge on how to do human subject research is indispensable for a substantial portion of engineers. Engineers are generally well trained in calculus and mechanics, but m...

  19. Engineering Research Division publication report, calendar year 1980

    Energy Technology Data Exchange (ETDEWEB)

    Miller, E.K.; Livingston, P.L.; Rae, D.C. (eds.)

    1980-06-01

    Each year the Engineering Research Division of the Electronics Engineering Department at Lawrence Livermore Laboratory has issued an internal report listing all formal publications produced by the Division during the calendar year. Abstracts of 1980 reports are presented.

  20. Engineering Research Division publication report, calendar year 1980

    International Nuclear Information System (INIS)

    Miller, E.K.; Livingston, P.L.; Rae, D.C.

    1980-06-01

    Each year the Engineering Research Division of the Electronics Engineering Department at Lawrence Livermore Laboratory has issued an internal report listing all formal publications produced by the Division during the calendar year. Abstracts of 1980 reports are presented

  1. Extending Engineering Practice Research with Shared Qualitative Data

    Science.gov (United States)

    Trevelyan, James

    2016-01-01

    Research on engineering practice is scarce and sharing of qualitative research data can reduce the effort required for an aspiring researcher to obtain enough data from engineering workplaces to draw generalizable conclusions, both qualitative and quantitative. This paper describes how a large shareable qualitative data set on engineering…

  2. Journal of Civil Engineering Research and Practice

    African Journals Online (AJOL)

    CMAC-engine”, a blended scheme of Ant Colony Optimization (ACO) and Cost Minimization (CM) algorithms. The feasibility of CMAC-engine is numerically experimented by solving a standard 25-bar space truss in the field of structural engineering ...

  3. Process Systems Engineering Education: Learning by Research

    Science.gov (United States)

    Abbas, A.; Alhammadi, H. Y.; Romagnoli, J. A.

    2009-01-01

    In this paper, we discuss our approach in teaching the final-year course Process Systems Engineering. Students are given ownership of the course by transferring to them the responsibility of learning. A project-based group environment stimulates learning while solving a real engineering problem. We discuss postgraduate student involvement and how…

  4. The Atlantic rift in Engineering Education Research Methodology

    DEFF Research Database (Denmark)

    de Graaff, Erik

    2015-01-01

    In Europe educational research branched off from social sciences during the sixties of the last century. Combining theories and methods from pedagogy, sociology and psychology researchers explored the different fields of education, ranging from kindergarten till higher education including...... engineering. A revival of engineering education research started in the USA around the turn of the century. Building on the concept of ‘scholarship of teaching’, engineers were challenged to investigate their own role as educators. Since these researchers have their academic background mostly in engineering...... and science, they tend to aim for ‘rigorous research’ according to the natural sciences. Worldwide the engineering education community has recognized the need to blend both the social sciences research approach and rigorous research. This paper explores the variation in research methods used by researchers...

  5. Engineering Research, Development and Technology, FY95: Thrust area report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  6. 75 FR 62113 - Board on Coastal Engineering Research

    Science.gov (United States)

    2010-10-07

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting... Experiment Station, 3909 Halls Ferry Road, Vicksburg, MS 39180-6199. SUPPLEMENTARY INFORMATION: The Board...

  7. 78 FR 13030 - Board on Coastal Engineering Research

    Science.gov (United States)

    2013-02-26

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting..., 1261 Duck Road, Kitty Hawk, NC 27949. Time: 8:30 a.m. to 4:30 p.m. (March 18, 2013). 8:30 a.m. to 11:30...

  8. 76 FR 37084 - Board on Coastal Engineering Research

    Science.gov (United States)

    2011-06-24

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting: July... and Development Center, Waterways Experiment Station, 3909 Halls Ferry Road, Vicksburg, MS 39180-6199...

  9. 77 FR 3240 - Board on Coastal Engineering Research

    Science.gov (United States)

    2012-01-23

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. DATES: Date of Meeting: February 7-8, 2012. Place: Hearing Room, Kingman Building, 7701 Telegraph Road, Alexandria, VA...

  10. The Use of Web Search Engines in Information Science Research.

    Science.gov (United States)

    Bar-Ilan, Judit

    2004-01-01

    Reviews the literature on the use of Web search engines in information science research, including: ways users interact with Web search engines; social aspects of searching; structure and dynamic nature of the Web; link analysis; other bibliometric applications; characterizing information on the Web; search engine evaluation and improvement; and…

  11. Engineer Research and Development Center's Materials Testing Center (MTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Engineer Research and Development Center's Materials Testing Center (MTC) is committed to quality testing and inspection services that are delivered on time and...

  12. Environmental, Health, and Safety Research Needs for Engineered Nanoscale Materials

    National Research Council Canada - National Science Library

    Alderson, Norris; Alexander, Catherine; Merzbacher, Celia; Chernicoff, William; Middendorf, Paul; Beck, Nancy; Chow, Flora; Poster, Dianne; Danello, Mary Ann; Barrera, Enriqueta

    2006-01-01

    ...) research and information needs related to understanding and management of potential risks of engineered nanoscale materials that may be used, for example, in commercial or consumer products, medical...

  13. Engineering education research in European Journal of Engineering Education and Journal of Engineering Education: citation and reference discipline analysis

    Science.gov (United States)

    Wankat, Phillip C.; Williams, Bill; Neto, Pedro

    2014-01-01

    The authors, citations and content of European Journal of Engineering Education (EJEE) and Journal of Engineering Education (JEE) in 1973 (JEE, 1975 EJEE), 1983, 1993, 2003, and available 2013 issues were analysed. Both journals transitioned from house organs to become engineering education research (EER) journals, although JEE transitioned first. In this process the number of citations rose, particularly of education and psychology sources; the percentage of research articles increased markedly as did the number of reference disciplines. The number of papers per issue, the number of single author papers, and the citations of science and engineering sources decreased. EJEE has a very broad geographic spread of authors while JEE authors are mainly US based. A 'silo' mentality where general engineering education researchers do not communicate with EER researchers in different engineering disciplines is evident. There is some danger that EER may develop into a silo that does not communicate with technically oriented engineering professors.

  14. International Conference on Research and Innovations in Mechanical Engineering

    CERN Document Server

    Singh, Paramjit; Singh, Harwinder; Brar, Gurinder

    2014-01-01

    This book comprises the proceedings of International Conference on Research and Innovations in Mechanical Engineering (ICRIME 2013) organized by Guru Nanak Dev Engineering College, Ludhiana with support from AICTE, TEQIP, DST and PTU, Jalandhar. This international conference served as a premier forum for communication of new advances and research results in the fields of mechanical engineering. The proceedings reflect the conference’s emphasis on strong methodological approaches and focus on applications within the domain of mechanical engineering. The contents of this volume aim to highlight new theoretical and experimental findings in the fields of mechanical engineering and closely related fields, including interdisciplinary fields such as robotics and mechatronics.

  15. Professional ethics in biomedical engineering practice and research.

    Science.gov (United States)

    Monzon, Jorge E; Monzon-Wyngaard, Alvaro

    2008-01-01

    This paper discusses some guidelines for use with the accepted fundamental canons of ethics for engineers. We present some rules of practice and professional obligations emerging from these canons. Basic recommendations for engineers dissenting on ethical grounds are also presented. Ethical issues relating to Biomedical Engineering research are illustrated. We mention some cases that could be used to further understanding the ethical implications of biomedical engineering practice.

  16. A research agenda for academic petroleum engineering programs. [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Calhoun, J.C. Jr.

    1990-03-31

    The development of a research agenda should be a direct way of portraying the scope of petroleum engineering, of identifying the critical technological issues faced by the profession,of elucidating the gaps between the existing research resources and the needs. and of outlining a program of research through which the petroleum engineering departments can be collectively of maximum service. Such an agenda would be of value to the profession of petroleum engineering, to industry and to government agencies, as well as to the faculty and students of the petroleum engineering departments. The purposes of the activity that led to this report, therefore, were to develop a statement to serve as a beginning research agenda for the petroleum engineering academic community; to bring together representatives of the petroleum engineering academic community to recognize the importance of developing a consensus posture with respect to research; and to provide a document that will assist in portraying to industry, government agencies and others the problems and needs of the petroleum engineering departments for conducting research. Contents of this report include; introduction; the background; the scope of petroleum engineering research; priority research topics and technological issues; non-technological research issues; and conclusions and recommendations.

  17. A research agenda for academic petroleum engineering programs

    Energy Technology Data Exchange (ETDEWEB)

    Calhoun, J.C. Jr.

    1990-03-31

    The development of a research agenda should be a direct way of portraying the scope of petroleum engineering, of identifying the critical technological issues faced by the profession,of elucidating the gaps between the existing research resources and the needs. and of outlining a program of research through which the petroleum engineering departments can be collectively of maximum service. Such an agenda would be of value to the profession of petroleum engineering, to industry and to government agencies, as well as to the faculty and students of the petroleum engineering departments. The purposes of the activity that led to this report, therefore, were to develop a statement to serve as a beginning research agenda for the petroleum engineering academic community; to bring together representatives of the petroleum engineering academic community to recognize the importance of developing a consensus posture with respect to research; and to provide a document that will assist in portraying to industry, government agencies and others the problems and needs of the petroleum engineering departments for conducting research. Contents of this report include; introduction; the background; the scope of petroleum engineering research; priority research topics and technological issues; non-technological research issues; and conclusions and recommendations.

  18. Ethical Considerations in Tissue Engineering Research: Case Studies in Translation

    Science.gov (United States)

    Baker, Hannah B.; McQuilling, John P.

    2016-01-01

    Tissue engineering research is a complex process that requires investigators to focus on the relationship between their research and anticipated gains in both knowledge and treatment improvements. The ethical considerations arising from tissue engineering research are similarly complex when addressing the translational progression from bench to bedside, and investigators in the field of tissue engineering act as moral agents at each step of their research along the translational pathway, from early benchwork and preclinical studies to clinical research. This review highlights the ethical considerations and challenges at each stage of research, by comparing issues surrounding two translational tissue engineering technologies: the bioartificial pancreas and a tissue engineered skeletal muscle construct. We present relevant ethical issues and questions to consider at each step along the translational pathway, from the basic science bench to preclinical research to first-in-human clinical trials. Topics at the bench level include maintaining data integrity, appropriate reporting and dissemination of results, and ensuring that studies are designed to yield results suitable for advancing research. Topics in preclinical research include the principle of “modest translational distance” and appropriate animal models. Topics in clinical research include key issues that arise in early-stage clinical trials, including selection of patient-subjects, disclosure of uncertainty, and defining success. The comparison of these two technologies and their ethical issues brings to light many challenges for translational tissue engineering research and provides guidance for investigators engaged in development of any tissue engineering technology. PMID:26282436

  19. Interdisciplinary Research for Engineering Skills Development Interdisciplinary Research for Engineering Skills Development

    Directory of Open Access Journals (Sweden)

    Angel E. González-Lizardo

    2012-02-01

    Full Text Available Este trabajo reporta los resultados de una experiencia interdisciplinaria de investigaciónpara estudiantes de ingeniería, en el Laboratorio de Ingeniería de Plasma (PEL por sussiglas en inglés de la Universidad Politécnica de Puerto Rico (UPPR. Los rasgos fuertes de esta experiencia y su relación con los resultados esperados por la Junta de Acreditación para Ingeniería y Tecnología (ABET por sus siglas en inglés son destacados, y una descripción cualitativa de los resultados en términos de la ejecución de los estudiantes durante la experiencia y después de ella. Se presenta un ejemplo de las diferentes actividades realizadas por un equipo de estudiantes subgraduados y su relación con los resultados esperados por ABET. La experiencia de investigación en el PEL provee a los estudiantes con una oportunidad única para practicar la ingeniería antes de su graduación, a través de problemas reales, innovación, colaboración con otras instituciones, y presentación de su trabajo a audiencias de científicos e ingenieros. This work reports the results of an ad hoc interdisciplinary research experience for undergraduate engineering students at the Plasma Engineering Laboratory (PEL of the Polytechnic University of Puerto Rico (PUPR. The strong features of this experience and their relationship with Accreditation Board for Engineering and Technology (ABET outcomes are pointed out, and a qualitative description of the results is discussed, in terms of the performance of the students during the experience and after it. An example of the different activities performed by a team of undergraduate students, and their relationship with the ABET outcomes is presented. The undergraduate research at the PEL provides the students with a unique opportunity to practice engineering before graduation through real life problems, innovation, collaboration with other institutions, and presentation of their work for engineering and scientific audiences.

  20. Engineers are from Mars and educators are from Venus: Research ...

    African Journals Online (AJOL)

    This article reports on a research project that investigated the supervisory practices in Masters level interdisciplinary research projects that were undertaken in engineering education. The projects usually entailed an interdisciplinary thesis that addressed an educational issue within a specific engineering discipline, such as ...

  1. Journal of Civil Engineering Research and Practice: Submissions

    African Journals Online (AJOL)

    Author Guidelines. AIMS AND SCOPE The Journal of Civil Engineering Research and Practice aims to publish original research papers of high standard, containing material of broad interest and of significant contribution to civil engineering, with emphasis being placed on material that is applicable to the solution of ...

  2. Optimization of In-Cylinder Pressure Filter for Engine Research

    Science.gov (United States)

    2017-06-01

    ARL-TR-8034 ● JUN 2017 US Army Research Laboratory Optimization of In-Cylinder Pressure Filter for Engine Research by Kenneth...Destroy this report when it is no longer needed. Do not return it to the originator. ARL-TR-8034 ● JUN 2017 US Army Research ...Laboratory Optimization of In-Cylinder Pressure Filter for Engine Research by Kenneth S Kim, Michael T Szedlmayer, Kurt M Kruger, and Chol-Bum M

  3. Research regarding reverse engineering for aircraft components

    Directory of Open Access Journals (Sweden)

    Udroiu Razvan

    2017-01-01

    Full Text Available Reverse engineering is a useful technique used in manufacturing and design process of new components. In aerospace industry new components can be developed, based on existing components without technical Computer Aided Design (CAD data, in order to reduce the development cycle of new products. This paper proposes a methodology wherein the CAD model of turbine blade can be build using computer aided reverse engineering technique utilising a 5 axis Coordinate Measuring Machine (CMM. The proposed methodology uses a scanning strategy by features, followed by a design methodology for 3D modelling of complex shapes.

  4. Researches on direct injection in internal-combustion engines

    Science.gov (United States)

    Tuscher, Jean E

    1941-01-01

    These researches present a solution for reducing the fatigue of the Diesel engine by permitting the preservation of its components and, at the same time, raising its specific horsepower to a par with that of carburetor engines, while maintaining for the Diesel engine its perogative of burning heavy fuel under optimum economical conditions. The feeding of Diesel engines by injection pumps actuated by engine compression achieves the required high speeds of injection readily and permits rigorous control of the combustible charge introduced into each cylinder and of the peak pressure in the resultant cycle.

  5. Status of Research in Biomedical Engineering 1968.

    Science.gov (United States)

    National Inst. of General Medical Sciences (NIH), Bethesda, MD.

    This status report is divided into eight sections. The first four represent the classical engineering or building aspects of bioengineering and deal with biomedical instrumentation, prosthetics, man-machine systems and computer and information systems. The next three sections are related to the scientific, intellectual and academic influence of…

  6. Recent Approaches in Tooth Engineering Research

    Czech Academy of Sciences Publication Activity Database

    Švandová, Eva; Veselá, Barbora; Křivánek, J.; Hampl, A.; Matalová, Eva

    2014-01-01

    Roč. 60, Suppl 1 (2014), s. 21-29 ISSN 0015-5500 R&D Projects: GA ČR GAP304/11/1418; GA MZd(CZ) NT11420 Institutional support: RVO:67985904 Keywords : engineering * tooth * stem cells * culture techniques Subject RIV: EA - Cell Biology Impact factor: 1.000, year: 2014

  7. Data integration, systems approach and multilevel description of complex biosystems

    Science.gov (United States)

    Hernández-Lemus, Enrique

    2013-12-01

    Recent years have witnessed the development of new quantitative approaches and theoretical tenets in the biological sciences. The advent of high throughput experiments in genomics, proteomics and electrophysiology (to cite just a few examples) have provided the researchers with unprecedented amounts of data to be analyzed. Large datasets, however can not provide the means to achieve a complete understanding of the underlying biological phenomena, unless they are supplied with a solid theoretical framework and with proper analytical tools. It is now widely accepted that by using and extending some of the paradigmatic principles of what has been called complex systems theory, some degree of advance in this direction can be attained. We will be presenting ways in which by using data integration techniques (linear, non-linear, combinatorial, graphical), multidimensional-multilevel descriptions (multifractal modeling, dimensionality reduction, computational learning), as well as an approach based in systems theory (interaction maps, probabilistic graphical models, non-equilibrium physics) have allowed us to better understand some problems in the interface of Statistical Physics and Computational Biology.

  8. Off reactor testings. Technological engineering applicative research

    International Nuclear Information System (INIS)

    Doca, Cezar

    2001-01-01

    By the end of year 2000 over 400 nuclear electro-power units were operating world wide, summing up a 350,000 MW total capacity, with a total production of 2,300 TWh, representing 16% of the world's electricity production. Other 36 units, totalizing 28,000 MW, were in construction, while a manifest orientation towards nuclear power development was observed in principal Asian countries like China, India, Japan and Korea. In the same world's trend one find also Romania, the Cernavoda NPP Unit 1 generating electrical energy into the national system beginning with 2 December 1996. Recently, the commercial contract was completed for finishing the Cernavoda NPP Unit 2 and launching it into operation by the end of year 2004. An important role in developing the activity of research and technological engineering, as technical support for manufacturing the CANDU type nuclear fuel and supplying with equipment the Cernavoda units, was played by the Division 7 TAR of the INR Pitesti. Qualification testings were conducted for: - off-reactor CANDU type nuclear fuel; - FARE tools, pressure regulators, explosion proof panels; channel shutting, as well as functional testing for spare pushing facility as a first step in the frame of the qualification tests for the charging/discharging machine (MID) 4 and 5 endings. Testing facilities are described, as well as high pressure hot/cool loops, measuring chains, all of them fulfilling the requirements of quality assurance. The nuclear fuel off-reactor tests were carried out to determine: strength; endurance; impact, pressure fall and wear resistance. For Cernavoda NPP equipment testings were carried out for: the explosion proof panels, pressure regulators, behaviour to vibration and wear of the steam generation tubings, effects of vibration upon different electronic component, channel shutting (for Cernavoda Unit 2), MID operating at 300 and 500 cycles. A number of R and D programs were conducted in the frame of division 7 TAR of INR

  9. Energy engineering: Student-researcher collaboration

    DEFF Research Database (Denmark)

    Leban, Krisztina Monika; Ritchie, Ewen; Beckowska, Patrycja Maria

    2013-01-01

    This article reports on cooperation methods between researchers and students at different levels. Levels included in this work are BSc, MSc and PhD student levels. At Aalborg University, Department of Energy Technology education and research are closely linked. The relationship between student......-student; student-researcher and researcher -researcher is analyzed. The problems of work division, synchronization, transportation, storing and dissemination are disused. The importance of a proper work method and collaboration between researchers at different levels is underlined. As a case study, a research...

  10. Research Skills Enhancement in Future Mechanical Engineers

    Directory of Open Access Journals (Sweden)

    Jorge Lino Alves

    2011-04-01

    Full Text Available Nowadays, the Web is a common tool for students searching information about the subjects taught in the different university courses. Although this is a good tool for the first rapid knowledge, a deeper study is usually demanded.

    After many years of teaching a course about ceramic and composite materials in the Integrated Master in Mechanical Engineering of Faculty of Engineering of University of Porto, Portugal, the authors used the Bologna reformulation of the mechanical engineering course to introduce new teaching methodologies based on a project based learning methodology.

    One of the main innovations is a practical work that comprises the study of a recent ceramic scientific paper, using all the actual available tools, elaboration of a scientific report, work presentation and participation in a debate.

    With this innovative teaching method the enrolment of the students was enhanced with a better knowledge about the ceramics subject and the skills related with the CDIO competences.

    This paper presents the reasons for this implementation and explains the teaching methodology adopted as well as the changes obtained in the students’ final results.

  11. Thrust Area Report, Engineering Research, Development and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  12. Decoupled control for internal combustion engines research test beds

    OpenAIRE

    López Hincapié, José David; Espinosa Oviedo, Jairo José; Agudelo Santamaría, John Ramiro

    2011-01-01

    This article presents a solid and robust automation model which has been developed and implemented in two different research engine test beds which were instrumented, one for diesel and the other one for spark ignition engines. The model, programmed in Matlab, is based on transfer functions with a decoupled (two single input single output systems) independent proportional and integral action controller that allows setting the desired engine speed and torque under stationary operation conditio...

  13. Biomedical engineering: A platform for research and innovation in ultrasound

    Science.gov (United States)

    Holland, Christy K.

    2004-05-01

    An undergraduate or graduate degree in biomedical engineering prepares students to solve problems at the interface between engineering and medicine. Biomedical engineering encompasses evolving areas such as advanced medical imaging for diagnosis and treatment of disease, tissue engineering for designing and manufacturing biological implants for damaged or diseased tissues and organs, and bioinformatics for determining which genes play a major role in health and disease. Biomedical engineering academic programs produce graduates with the ability to pursue successful careers in the biomedical device industry or to obtain advanced degrees leading to careers in biomedical engineering research, medicine, law or business. Biomedical engineering majors take courses in biology, anatomy, physics, chemistry, engineering, mathematics and medical product design and value life-long learning. Students learn to work effectively in interdisciplinary teams comprised of individuals with diverse social, cultural and technical backgrounds. Biomedical engineering is becoming increasingly important in imaging and image-guided research. Some examples of innovative ultrasound technology under development are ultrasound devices to accelerate the dissolution of blood clots, advanced surgical instruments with ultrasound guidance and ultrasound contrast agents for targeted drug delivery. Biomedical engineering is a great career choice for technically minded individuals who endeavor to work on applied problems that are medically relevant.

  14. Undergraduate research internships to support exploratory research in transportation engineering : project final report, Sept. 2008.

    Science.gov (United States)

    2008-09-01

    The Case Western Reserve University Department of Civil Engineering is in the process of expanding its teaching and research activities, Transportation Engineering as part of its initiative in the overall area of Infrastructure Performance and Reliab...

  15. Natural Sciences and Engineering Research Council | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ca/index_eng.asp. International Research Initiative on Adaptation to Climate Change. The International Research Initiative on Adaptation to Climate Change aims to help vulnerable populations in Canada and in developing countries adapt to ...

  16. FOSER - Future of Software Engineering Research

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The 2010 Report of the Presidents Council of Advisors on Science and Technology PCAST, entitled ?Designing a Digital Future: Federally Funded Research and...

  17. Artificial Sight Basic Research, Biomedical Engineering, and Clinical Advances

    CERN Document Server

    Humayun, Mark S; Chader, Gerald; Greenbaum, Elias

    2008-01-01

    Artificial sight is a frontier area of modern ophthalmology combining the multidisciplinary skills of surgical ophthalmology, biomedical engineering, biological physics, and psychophysical testing. Many scientific, engineering, and surgical challenges must be surmounted before widespread practical applications can be realized. The goal of Artificial Sight is to summarize the state-of-the-art research in this exciting area, and to describe some of the current approaches and initiatives that may help patients in a clinical setting. The Editors are active researchers in the fields of artificial sight, biomedical engineering and biological physics. They have received numerous professional awards and recognition for their work. The artificial sight team at the Doheny Eye Institute, led by Dr. Mark Humayun, is a world leader in this area of biomedical engineering and clinical research. Key Features Introduces and assesses the state of the art for a broad audience of biomedical engineers, biophysicists, and clinical...

  18. 2007 Plant Metabolic Engineering Gordon Conference and Graduate Research Seminar

    Energy Technology Data Exchange (ETDEWEB)

    Erich Grotewold

    2008-09-15

    Plant Metabolic Engineering is an emerging field that integrates a diverse range of disciplines including plant genetics, genomics, biochemistry, chemistry and cell biology. The Gordon-Kenan Graduate Research Seminar (GRS) in Plant Metabolic Engineering was initiated to provide a unique opportunity for future researcher leaders to present their work in this field. It also creates an environment allowing for peer-review and critical assessment of work without the intimidation usually associated with the presence of senior investigators. The GRS immediately precedes the Plant Metabolic Engineering Gordon Research Conference and will be for and by graduate students and post-docs, with the assistance of the organizers listed.

  19. FY10 Engineering Innovations, Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

    2011-01-11

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

  20. Career Pathways of Science, Engineering and Technology Research Postgraduates

    Science.gov (United States)

    Giles, Marnie; Ski, Chantal; Vrdoljak, Davorin

    2009-01-01

    Suitably qualified scientists and engineers are essential for research and development, innovation and, in turn, the growth of the economy. Science, engineering and technology skills are therefore necessary for Australia to remain competitive in a global market. This article reports findings from a nationwide study investigating the career…

  1. Case Study Research in Software Engineering Guidelines and Examples

    CERN Document Server

    Runeson, Per; Rainer, Austen; Regnell, Bjorn

    2012-01-01

    Based on their own experiences of in-depth case studies of software projects in international corporations, in this book the authors present detailed practical guidelines on the preparation, conduct, design and reporting of case studies of software engineering.  This is the first software engineering specific book on the case study research method.

  2. The research and practice of spacecraft software engineering

    Science.gov (United States)

    Chen, Chengxin; Wang, Jinghua; Xu, Xiaoguang

    2017-06-01

    In order to ensure the safety and reliability of spacecraft software products, it is necessary to execute engineering management. Firstly, the paper introduces the problems of unsystematic planning, uncertain classified management and uncontinuous improved mechanism in domestic and foreign spacecraft software engineering management. Then, it proposes a solution for software engineering management based on system-integrated ideology in the perspective of spacecraft system. Finally, a application result of spacecraft is given as an example. The research can provides a reference for executing spacecraft software engineering management and improving software product quality.

  3. Summaries of FY 1995 engineering research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The individual engineering project summaries follow the program overview. The summaries are ordered alphabetically by name of institution and so the table of contents lists all the institutions at which projects were sponsored in fiscal year 1995. Each project entry begins with an institutional-departmental heading. The names of investigators are listed immediately below the title. The funding level for fiscal year 1995 appears to the right of title; it is followed by the budget activity number. These numbers categorize the projects for budgetary purposes and the categories are described in the budget number index. A separate index of Principal Investigators includes phone number, fax number and e-mail address, where available. The fiscal year in which either the project began or was renewed and the anticipated duration in years are indicated respectively by the first two and last digits of the sequence directly below the budget activity number. The summary description of the project completes the entry.

  4. Tissue Engineering Organs for Space Biology Research

    Science.gov (United States)

    Vandenburgh, H. H.; Shansky, J.; DelTatto, M.; Lee, P.; Meir, J.

    1999-01-01

    Long-term manned space flight requires a better understanding of skeletal muscle atrophy resulting from microgravity. Atrophy most likely results from changes at both the systemic level (e.g. decreased circulating growth hormone, increased circulating glucocorticoids) and locally (e.g. decreased myofiber resting tension). Differentiated skeletal myofibers in tissue culture have provided a model system over the last decade for gaining a better understanding of the interactions of exogenous growth factors, endogenous growth factors, and muscle fiber tension in regulating protein turnover rates and muscle cell growth. Tissue engineering these cells into three dimensional bioartificial muscle (BAM) constructs has allowed us to extend their use to Space flight studies for the potential future development of countermeasures.

  5. Data-driven engineering design research: Opportunities using open data

    DEFF Research Database (Denmark)

    Parraguez Ruiz, Pedro; Maier, Anja

    2017-01-01

    the already available and continuously growing body of open data sources to create opportunities for research in Engineering Design. Insights are illustrated by an examination of two examples: a study of open source software repositories and an analysis of open business registries in the cleantech industry....... We conclude with a discussion about the limitations, challenges and risks of using open data in Engineering Design research and practice....

  6. Research of oxyhydrogen gas mixture influence upon diesel engine performance

    Directory of Open Access Journals (Sweden)

    Dimitrov Evgeni

    2017-01-01

    Full Text Available The paper presents the results from testing a Volkswagen 1.9 D diesel engine on a test bench to work on gas-diesel cycle with oxyhydrogen gas mixture. Experimental research is done to show the impact of oxyhydrogen gas mixture on engine consumption and environmental indexes such as: fuel and specific fuel consumption; carbon monoxide; carbon dioxide; oxides of nitrogen; smoke emissions. The oxyhydrogen gas mixture delivered to the engine intake manifold with constant flow rate. The results are obtained under research contract № 6524-4/2016.

  7. The Effectiveness Of Physics Based Research In Learning Engineering Physics

    OpenAIRE

    -, Usmeldi

    2015-01-01

    This research aims to know the effect of implementation the research based learning to master properly physics concepts and students' generic ability. This research used experiment method with pretest-posttest group control design. The results of this research were the research based learning was effective to improving students' mastery of physics concepts and it was also developing the students' generic ability. The recommendation suggested to lecturer of engineering physics is implementing ...

  8. Research Group Introduction : Mechanical Control Engineering Laboratory, Mechanical Engineering Department, Shibaura Institute of Technology

    Science.gov (United States)

    内村, 裕

    Mechanical Control Engineering Laboratory focuses on the control theory and implementation for the robotic applications. The research themes include network based tele-operation, mobile robots control for network relay, autonomous outdoor mobile robot and biped robot.

  9. Review of research on simulation engineering in FY2007

    International Nuclear Information System (INIS)

    2009-02-01

    Research on simulation engineering for nuclear applications, based on the plan for meeting the mid-term goal of the Japan Atomic Energy Agency', has been performed at Center for Computational Science and e-Systems, Japan Atomic Energy Agency (CCSE/JAEA). CCSE established the committee consisting outside experts and authorities which does research evaluation and advices for the assistance of the research and development. This report summarizes the result of the evaluation by the committee on the research on simulation engineering performed at CCSE/JAEA in FY2007. (author)

  10. Re-Educating Jet-Engine-Researchers to Stay Relevant

    Science.gov (United States)

    Gal-Or, Benjamin

    2016-06-01

    To stay relevantly supported, jet-engine researchers, designers and operators should follow changing uses of small and large jet engines, especially those anticipated to be used by/in the next generation, JET-ENGINE-STEERED ("JES") fleets of jet drones but fewer, JES-Stealth-Fighter/Strike Aircraft. In addition, some diminishing returns from isolated, non-integrating, jet-engine component studies, vs. relevant, supersonic, shock waves control in fluidic-JES-side-effects on compressor stall dynamics within Integrated Propulsion Flight Control ("IPFC"), and/or mechanical JES, constitute key relevant methods that currently move to China, India, South Korea and Japan. The central roles of the jet engine as primary or backup flight controller also constitute key relevant issues, especially under post stall conditions involving induced engine-stress while participating in crash prevention or minimal path-time maneuvers to target. And when proper instructors are absent, self-study of the JES-STVS REVOLUTION is an updating must, where STVS stands for wing-engine-airframe-integrated, embedded stealthy-jet-engine-inlets, restructured engines inside Stealth, Tailless, canard-less, Thrust Vectoring IFPC Systems. Anti-terror and Airliners Super-Flight-Safety are anticipated to overcome US legislation red-tape that obstructs JES-add-on-emergency-kits-use.

  11. Chemical Engineering Division research highlights, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Burris, L.; Webster, D. S.; Barney, D. L.; Cafasso, F. A.; Steindler, M. J.

    1980-06-01

    In 1979, CEN conducted research and development in the following areas: (1) high-temperature, rechargeable lithium/iron sulfide batteries for electric vehicles and electric utility load leveling; (2) ambient-temperature batteries - improved lead-acid, nickel/zinc, and nickel/iron - for electric vehicles; (3) molten carbonate fuel cells for use by electric utilities; (4) coal technology - mainly fluidized-bed combustion of coal in the presence of SO/sub 2/ sorbent of limestone; (5) heat- and seed- recovery technology for open-cycle magnetohydrodynamic systems; (6) solar energy collectors and thermal energy storage; (7) fast breeder reactor chemistry research - chemical support of reactor safety studies, chemistry of irradiated fuels, and sodium technology; (8) fuel cycle technology - reprocessing of nuclear fuels, management of nuclear wastes, geologic migration studies, and proof-of-breeding studies for the Light Water Breeder Reactor; (9) magnetic fusion research - lithium processing technology and materials research; and (10) basic energy sciences - homogeneous catalysis, thermodynamics of inorganic and organic materials, environmental chemistry, electrochemistry, and physical properties of salt vapors. Separate abstracts were prepared for each of these areas.

  12. Global Journal of Engineering Research: Advanced Search

    African Journals Online (AJOL)

    Search tips: Search terms are case-insensitive; Common words are ignored; By default only articles containing all terms in the query are returned (i.e., AND is implied); Combine multiple words with OR to find articles containing either term; e.g., education OR research; Use parentheses to create more complex queries; e.g., ...

  13. Chemical Engineering Division research highlights, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-08-01

    Separate abstracts are included for sections with information on lithium/metal sulfide batteries; electrochemical energy development; advanced fuel cell development; utilization of coal; magnetohydrodynamics technology; LMFBR and GCFR support work; fuel cycle studies; fusion reactor research; solar energy development; and basic energy science.

  14. Review of research on simulation engineering in FY2009

    International Nuclear Information System (INIS)

    2011-03-01

    Research on simulation engineering for nuclear applications, based on 'the plan for meeting the mid-term goal of the Japan Atomic Energy Agency', has been performed at Center for Computational Science and e-Systems, Japan Atomic Energy Agency (CCSE/JAEA). CCSE established the committee consisting outside experts and authorities which does research evaluation and advices for the assistance of the research and development. This report summarizes results of the evaluation by the committee on the followings. (1) Research and development on simulation engineering performed at CCSE/JAEA in FY2009. (2) Research and development on simulation engineering performed at CCSE/JAEA in the period of the midterm plan (October 1st, 2005 - March 31st, 2010). (author)

  15. The Phenomenon of Research and Development Method in Research of Software Engineering

    Directory of Open Access Journals (Sweden)

    Mufadhol Mufadhol

    2017-06-01

    Full Text Available Progress of science and technology is very influential to development of software engineering. Communication between software developers and prospective users of software engineering by prototype system is very important in the development of software engineering. Research and Development method in research of software engineering is very suitable be used because supports the existence of such communications. But it is found there are several research that use this method with not perfect or not completed, so research results produced less fit with purpose. This paper will be explain how to used the stages must be carried out in research of software engineering with the method of research and development, in order to make the research more be effectively and efficiently as well as software development efforts that simultaneously accompanied by the validation effort for the results to be achieved in accordance with the expected goals.

  16. Impacting Society through Engineering Design Research

    DEFF Research Database (Denmark)

    Howard, Thomas J.

    2011-01-01

    Following the recent ICED11 conference in Copenhagen, Thomas Howard, ICED11 Assistant Chair and Ass. Professor at DTU has written a reflection on design research and design practice, suggesting that in addition to benefiting society through the improved understanding of methods of and approaches...... to design, the academic design community should through design practice produce empowering products which address societal needs unbound by the necessity for profit....

  17. [Research progress of cell sheet technology in oral tissue engineering].

    Science.gov (United States)

    Liu, Ying; Wang, Daqing; Mo, Jinlong; Li, Binzhong

    2014-09-01

    Cell sheet technology (CST) demonstrates the innovation and advantage by overcoming some immanent shortcomings of traditional tissue engineering. To review the research progress of CST in oral tissue engineering. The related home and abroad literature about CST and its application in stomatology was extensively reviewed and analyzed. Compared to the traditional tissue engineering technology, CST has the features of high seeding density, abundant matrix, good biological compatibility, and perfect operability, which can improve the survival rate of cell transplantation and promote functional reconstruction. It is reported that CST has been successfully used in the following fields, repair and reconstruction of periodontium, soft tissues of oral mucosa, and bones in maxillofacial region. With the development of CST and combined with the traditional tissue engineering technologies, it will promote the tissue engineering further progress in stomatology.

  18. Engineering education research: Impacts of an international network of female engineers on the persistence of Liberian undergraduate women studying engineering

    Science.gov (United States)

    Rimer, Sara; Reddivari, Sahithya; Cotel, Aline

    2015-11-01

    As international efforts to educate and empower women continue to rise, engineering educators are in a unique position to be a part of these efforts by encouraging and supporting women across the world at the university level through STEM education and outreach. For the past two years, the University of Michigan has been a part of a grassroots effort to encourage and support the persistence of engineering female students at University of Liberia. This effort has led to the implementation of a leadership camp this past August for Liberian engineering undergraduate women, meant to: (i) to empower engineering students with the skills, support, and inspiration necessary to become successful and well-rounded engineering professionals in a global engineering market; and (ii) to strengthen the community of Liberian female engineers by building cross-cultural partnerships among students resulting in a international network of women engineers. This session will present qualitative research findings on the impact of this grassroots effort on Liberian female students? persistence in engineering, and the future directions of this work.

  19. Journal of Civil Engineering Research and Practice: Editorial Policies

    African Journals Online (AJOL)

    The Journal of Civil Engineering Research and Practice aims to publish original research papers of high standard, containing material of significant contribution to civil ... Editor-in-Chief communicates review reports to authors, and each paper is accepted or rejected based on at least two concurring review reports ...

  20. Engineering research, development and technology: Thrust area report FY 91

    International Nuclear Information System (INIS)

    1991-01-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence, Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) conduct high quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. The thrust area leader is also responsible for carrying out the work that follows from the Engineering Research, Development, and Technology Program so that the results can be applied as early as possible to the needs of LLNL programs. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year, 1991. Its intent is to provide timely summaries of objectives, theories, methods, and results

  1. Annual report of Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo, fiscal year 1996

    International Nuclear Information System (INIS)

    1997-08-01

    This report summarizes research and educational activities, operation status of the research facilities of the Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo on fiscal year 1996. This facility has four major research facilities such as fast neutron source reactor 'Yayoi', electron Linac, fundamental experiment facility for nuclear fusion reactor blanket design and high fluence irradiation facility(HIT). Education and research activities are conducted in a wide fields of nuclear engineering using these facilities. The former two facilities are available for various studies by universities all over Japan, facility for nuclear fusion reactor blanket design is utilized for research within the Faculty of Engineering and HIT is used for the research within the University of Tokyo. The facility established a plan to reorganized into a nation wide research collaboration center in fiscal year 1995 and after further discussion of a future program it is decided to hold 'Nuclear energy symposium' periodically after fiscal year 1997 as a part of the activity for appealing the research results to the public. (G.K.)

  2. The Engine Performance of a Diesel Engine and the Research of the Effect of Fuel Additives on Engine Oil and Engine Parts

    OpenAIRE

    Hanbey HAZAR; İlker TEMIZER

    2012-01-01

    In this study, the development of properties of diesel fuel, and the effect of methanol fuel on engine performance and on engine parts have been researched. For this purpose, this study consists of the analyses respectively in that organometal MnO2 synthesis, fuel analysis, engine tests involving the values of the engine performance and the effect of methanol used in this study on engine lubricating oil have been examined. Experiments have been made by adding methanol into 1 liter fuel in the...

  3. General aviation internal combustion engine research programs at NASA-Lewis Research Center

    Science.gov (United States)

    Willis, E. A.

    1978-01-01

    An update is presented of non-turbine general aviation engine programs underway at the NASA-Lewis Research Center in Cleveland, Ohio. The program encompasses conventional, lightweight diesel and rotary engines. Its three major thrusts are: (a) reduced SFC's; (b) improved fuels tolerance; and (c) reducing emissions. Current and planned future programs in such areas as lean operation, improved fuel management, advanced cooling techniques and advanced engine concepts, are described. These are expected to lay the technology base, by the mid to late 1980's, for engines whose life cycle fuel costs are 30 to 50% lower than today's conventional engines.

  4. Engineering Design Thinking and Information Gathering. Final Report. Research in Engineering and Technology Education

    Science.gov (United States)

    Mentzer, Nathan

    2011-01-01

    The objective of this research was to explore the relationship between information access and design solution quality of high school students presented with an engineering design problem. This objective is encompassed in the research question driving this inquiry: How does information access impact the design process? This question has emerged in…

  5. The Rücker-Markov invariants of complex Bio-Systems: applications in Parasitology and Neuroinformatics.

    Science.gov (United States)

    González-Díaz, Humberto; Riera-Fernández, Pablo; Pazos, Alejandro; Munteanu, Cristian R

    2013-03-01

    Rücker's walk count (WC) indices are well-known topological indices (TIs) used in Chemoinformatics to quantify the molecular structure of drugs represented by a graph in Quantitative structure-activity/property relationship (QSAR/QSPR) studies. In this work, we introduce for the first time the higher-order (kth order) analogues (WCk) of these indices using Markov chains. In addition, we report new QSPR models for large complex networks of different Bio-Systems useful in Parasitology and Neuroinformatics. The new type of QSPR models can be used for model checking to calculate numerical scores S(Lij) for links Lij (checking or re-evaluation of network connectivity) in large networks of all these fields. The method may be summarized as follows: (i) first, the WCk(j) values are calculated for all jth nodes in a complex network already created; (ii) A linear discriminant analysis (LDA) is used to seek a linear equation that discriminates connected or linked (Lij=1) pairs of nodes experimentally confirmed from non-linked ones (Lij=0); (iii) The new model is validated with external series of pairs of nodes; (iv) The equation obtained is used to re-evaluate the connectivity quality of the network, connecting/disconnecting nodes based on the quality scores calculated with the new connectivity function. The linear QSPR models obtained yielded the following results in terms of overall test accuracy for re-construction of complex networks of different Bio-Systems: parasite-host networks (93.14%), NW Spain fasciolosis spreading networks (71.42/70.18%) and CoCoMac Brain Cortex co-activation network (86.40%). Thus, this work can contribute to the computational re-evaluation or model checking of connectivity (collation) in complex systems of any science field. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  6. Performance Engineering Research Center and RECOVERY. Performance Engineering Research Institution SciDAC-e Augmentation. Performance enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Hollingsworth, Jeffrey K. [Univ. of Maryland, College Park, MD (United States)

    2015-10-12

    This project concentrated on various ways to improve the measurement and tuning large-scale parallel applications. This project was supplement to the project DE-FC0206ER25763 (“Performance Engineering Research Center”). The research conducted during this project is summarized in this report. The complete details of the work are available in the ten publications listed at the end of the report. It also supported the Ph.D. studies of three students and one research scientist.

  7. Engineering research, development and technology. Thrust area report, FY93

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

  8. Formulating a Concept Base for Secondary Level Engineering: A Review and Synthesis. Research in Engineering and Technology Education

    Science.gov (United States)

    Custer, Rodney L.; Daugherty, Jenny L.; Meyer, Joseph P.

    2009-01-01

    The purpose of the study was to identify and refine a conceptual foundation for secondary school engineering education. Specifically, this study sought to address the following research questions: (1) What engineering concepts are present in literature related to the nature and philosophy of engineering?; (2) What engineering concepts are embedded…

  9. Molecular research and genetic engineering of resistance to ...

    African Journals Online (AJOL)

    This paper reviews the recent research progress on genetic methods of resistance, the status and existing problems, traditional breeding, the main resistance mechanism, molecular markers and genetic engineering of resistance genes. It is hoped that new breeding methods and new varieties resistant to Verticillium wilt will ...

  10. Plant cell engineering: current research, application and future prospects

    International Nuclear Information System (INIS)

    Wang Xunqing; Liu Luxiang

    2008-01-01

    This paper reviewed the current status of basic research in plant cell engineering, highlighted the application of embryo culture, double haploid (DH) technology, protoplast culture and somatic hybridization, somaclonal variation, rapid propagation, and bio-products production of plant-origin, and t he prospects. (authors)

  11. Analysis and development of research lines in Industrial Engineering

    OpenAIRE

    Del Carpio Gallegos, Javier

    2014-01-01

    This article shows the process by which developed and analyzed the research in the Faculty of Engineering of San Marcos.  El presente artículo muestra el proceso mediante el cual se desarrollaron y analizaron las líneas de investigación en la Facultad de Ingeniería Industrial de la UNMSM.

  12. ChE Undergraduate Research Projects in Biomedical Engineering.

    Science.gov (United States)

    Stroeve, Pieter

    1981-01-01

    Describes an undergraduate research program in biomedical engineering at the State University of New York at Buffalo. Includes goals and faculty comments on the program. Indicates that 58 percent of projects conducted between 1976 and 1980 have been presented at meetings or published. (SK)

  13. Directions in engineering research: an assessment of opportunities and needs

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council

    1987-01-01

    ... Commission on Engineering and Technical Systems National Research Council Washington, D.C. NATIONAL ACADEMY PRESS Washington, D.C. 1987 i Copyrightthe cannot be not from book, paper however, version for formatting, original authoritative the typesetting-specific the as from created publication files XML from other this and of recomposed styles, v...

  14. NTRCI Legacy Engine Research and Development Project Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith-Holbert, Connie [National Transportation Research Center, Inc., Knoxville, TN (United States); Petrolino, Joseph [National Transportation Research Center, Inc., Knoxville, TN (United States); Watkins, Bart [Power Source Technologies Inc., Corvallis, OR (United States); Irick, David [Power Source Technologies Inc., Corvallis, OR (United States)

    2011-12-31

    The Legacy engine is a completely new design, transitional diesel engine, replacing the reciprocating engine with a rotary engine. The Legacy engine offers significant advances over conventional internal combustion engines in 1) power to weight ratio; 2) multiple fuel acceptance; 3) fuel economy; and 4) environmental compliance. These advances are achieved through a combination of innovative design geometry, rotary motion, aspiration simplicity, and manufacturing/part simplicity. The key technical challenge to the Legacy engine's commercialization, and the focus of this project, was the development of a viable roton tip seal. The PST concept for the roton tip seal was developed into a manufacturable design. The design was evaluated using a custom designed and fabricated seal test fixture and further refined. This design was incorporated into the GEN2.5A prototype and tested for achievable compression pressure. The Decision Point at the end of Phase 1 of the project (described below) was to further optimize the existing tip seal design. Enhancements to the tip seal design were incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Compression pressures adequate for compression ignition of diesel fuel were achieved, although not consistently in all combustion volumes. The variation in compression pressures was characterized versus design features. As the roton tip seal performance was improved, results pointed toward inadequate performance of the housing side seals. Enhancement of the housing side seal system was accomplished using a custom designed side seal test fixture. The design enhancements developed with the test fixture were also incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Finally, to simplify the requirements for the roton tip seals and to enhance the introduction and combustion of fuel, a flush-mount fuel injector

  15. Global Relevance of Translational Research in Engineering and Project Management

    Directory of Open Access Journals (Sweden)

    Kriengsak Panuwatwanich

    2016-07-01

    Full Text Available In this issue of the EPPM journal, we include five interesting papers reporting on the research undertaken within the contexts of five different countries: Italy, Norway, Saudi Arabia, Romania and Iran. These papers address various key issues in engineering and project management, including green building rating system, agile project management, construction delays, awarding process of public construction projects and Building Information Modelling (BIM. A good mixture of both quantitative and qualitative research methods is also worth noting in this issue.

  16. DATA MANAGEMENT PLANNING IN ENGINEERING DESIGN AND MANUFACTURING RESEARCH

    DEFF Research Database (Denmark)

    Darlington, Mansur; Howard, Thomas J.; Ball, Alex

    2011-01-01

    There is a growing interest in maximizing the value of research data through their sharing and re-use. This desire is hampered by the prevailing culture in data management during the research activity which largely ignores the potential for re-use, and by a lack of understanding of the character...... of research data and of the barriers to and opportunities for their re-use. The work reported here characterizes engineering design and manufacture research data and explores the context of their development and current management. Insights from the work have resulted in the authors proposing a number of new...... approaches and tools which provide the basis for better management practice....

  17. Current and Future Research Directions in Requirements Engineering

    Science.gov (United States)

    Cheng, Betty H. C.; Atlee, Joanne M.

    In this paper, we review current requirements engineering (RE) research and identify future research directions suggested by emerging software needs. First, we overview the state of the art in RE research. The research is considered with respect to technologies developed to address specific requirements tasks, such as elicitation, modeling, and analysis. Such a review enables us to identify mature areas of research, as well as areas that warrant further investigation. Next, we review several strategies for performing and extending RE research results, to help delineate the scope of future research directions. Finally, we highlight what we consider to be the “hot” current and future research topics, which aim to address RE needs for emerging systems of the future.

  18. Towards a portal and search engine to facilitate academic and research collaboration in engineering and education

    Science.gov (United States)

    Bonilla Villarreal, Isaura Nathaly

    While international academic and research collaborations are of great importance at this time, it is not easy to find researchers in the engineering field that publish in languages other than English. Because of this disconnect, there exists a need for a portal to find Who's Who in Engineering Education in the Americas. The objective of this thesis is to built an object-oriented architecture for this proposed portal. The Unified Modeling Language (UML) model developed in this thesis incorporates the basic structure of a social network for academic purposes. Reverse engineering of three social networks portals yielded important aspects of their structures that have been incorporated in the proposed UML model. Furthermore, the present work includes a pattern for academic social networks..

  19. Use of university research reactors to teach control engineering

    International Nuclear Information System (INIS)

    Bernard, J.A.

    1991-01-01

    University research reactors (URRs) have provided generations of students with the opportunity to receive instruction and do hands-on work in reactor dynamics, neutron scattering, health physics, and neutron activation analysis. Given that many URRs are currently converting to programmable control systems, the opportunity now exists to provide a similar learning experience to those studying systems control engineering. That possibility is examined here with emphasis on the need for the inclusion of experiment in control engineering curricula, the type of activities that could be performed, and safety considerations

  20. Japan Atomic Energy Research Institute, Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    1979-09-01

    Research activities in the Division of Reactor Engineering in fiscal 1978 are described. Works of the Division are development of multi-purpose Very High Temperature Gas Cooled Reactor, fusion reactor engineering, and development of Liquid Metal Fast Breeder Reactor for Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology, and Committees on Reactor Physics and in Decommissioning of Nuclear Facilities. (author)

  1. Annual report of the CTR Blanket Engineering research facility in 1994

    International Nuclear Information System (INIS)

    1995-09-01

    This is an annual report of the studies on Controlled Thermo-nuclear Reactor(CTR) Blanket Engineering which have been carried out in the Faculty of Engineering, the University of Tokyo, in FY 1994. This research facility on the CTR Blanket Engineering is located in the Nuclear Engineering Research Laboratory, the Tokai-mura branch of the Faculty of Engineering. (author)

  2. Annual report of the CTR Blanket Engineering research facility in 1996

    International Nuclear Information System (INIS)

    1998-02-01

    This is an annual report of the studies on Controlled Thermo-nuclear Reactor (CTR) Blanket Engineering which have been carried out in the Faculty of Engineering, the University of Tokyo, in FY 1996. This research facility on the CTR Blanket Engineering is located in the Nuclear Engineering Research Laboratory, the Tokai-mura branch of the Faculty of Engineering. (J.P.N.)

  3. Annual report of the CTR Blanket Engineering research facility in 1992

    International Nuclear Information System (INIS)

    1993-08-01

    This is an annual report of the studies on Controlled Thermo-nuclear Reactor (CTR) Blanket Engineering which have been carried out in the Faculty of Engineering, the University of Tokyo, in FY 1992. This research facility on the CTR Blanket Engineering is located in the Nuclear Engineering Research Laboratory, the Tokai-mura branch of the Faculty of Engineering. (J.P.N.)

  4. Linking First-Year and Senior Engineering Design Teams: Engaging Early Academic Career Students in Engineering Design

    Science.gov (United States)

    Fox, Garey A.; Weckler, Paul; Thomas, Dan

    2015-01-01

    In Biosystems Engineering at Oklahoma State University, senior design is a two semester course in which students work on real-world projects provided by clients. First-year (freshmen and trans­fer) students enroll in an introductory engineering course. Historically, these students worked on a team-based analysis project, and the engineering design…

  5. Research on the Fault Coefficient in Complex Electrical Engineering

    Directory of Open Access Journals (Sweden)

    Yi Sun

    2015-08-01

    Full Text Available Fault detection and isolation in a complex system are research hotspots and frontier problems in the reliability engineering field. Fault identification can be regarded as a procedure of excavating key characteristics from massive failure data, then classifying and identifying fault samples. In this paper, based on the fundamental of feature extraction about the fault coefficient, we will discuss the fault coefficient feature in complex electrical engineering in detail. For general fault types in a complex power system, even if there is a strong white Gaussian stochastic interference, the fault coefficient feature is still accurate and reliable. The results about comparative analysis of noise influence will also demonstrate the strong anti-interference ability and great redundancy of the fault coefficient feature in complex electrical engineering.

  6. Nuclear science and engineering education at a university research reactor

    International Nuclear Information System (INIS)

    Loveland, W.

    1990-01-01

    The research and teaching operations of the Nuclear Chemistry Division of the Dept. of Chemistry and the Dept. of Nuclear Engineering are housed at the Oregon State University Radiation Center. This facility which includes a 1.1 MW TRIGA reactor was used for 53 classes from a number of different academic departments last year. About one-half of these classes used the reactor and ∼25% of the reactor's 45 hour week was devoted to teaching. Descriptions will be given of reactor-oriented instructional programs in nuclear engineering, radiation health and nuclear chemistry. In nuclear chemistry, classes in (a) nuclear chemistry for nuclear engineers, (b) radiotracer methods, (c) elementary and advanced activation analysis, and (d) advanced nuclear instrumentation will be described in detail. The use of the facility to promote general nuclear literacy among college students, high school and grade school students and the general population will also be covered

  7. Research reactor usage at the Idaho National Engineering Laboratory in support of university research and education

    International Nuclear Information System (INIS)

    Woodall, D.M.; Dolan, T.J.; Stephens, A.G.

    1990-01-01

    The Idaho National Engineering Laboratory is a US Department of Energy laboratory which has a substantial history of research and development in nuclear reactor technologies. There are a number of available nuclear reactor facilities which have been incorporated into the research and training needs of university nuclear engineering programs. This paper addresses the utilization of the Advanced Reactivity Measurement Facility (ARMF) and the Coupled Fast Reactivity Measurement Facility (CFRMF) for thesis and dissertation research in the PhD program in Nuclear Science and Engineering by the University of Idaho and Idaho State University. Other reactors at the INEL are also being used by various members of the academic community for thesis and dissertation research, as well as for research to advance the state of knowledge in innovative nuclear technologies, with the EBR-II facility playing an essential role in liquid metal breeder reactor research. 3 refs

  8. Towards Multi-Method Research Approach in Empirical Software Engineering

    Science.gov (United States)

    Mandić, Vladimir; Markkula, Jouni; Oivo, Markku

    This paper presents results of a literature analysis on Empirical Research Approaches in Software Engineering (SE). The analysis explores reasons why traditional methods, such as statistical hypothesis testing and experiment replication are weakly utilized in the field of SE. It appears that basic assumptions and preconditions of the traditional methods are contradicting the actual situation in the SE. Furthermore, we have identified main issues that should be considered by the researcher when selecting the research approach. In virtue of reasons for weak utilization of traditional methods we propose stronger use of Multi-Method approach with Pragmatism as the philosophical standpoint.

  9. NASA Space Engineering Research Center for VLSI systems design

    Science.gov (United States)

    1991-01-01

    This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

  10. Characterization of binding and mobility of metals and xenobiotics in continuous flow and soil biosystems

    International Nuclear Information System (INIS)

    Sunovska, A.

    2016-01-01

    The main aim of the dissertation thesis was to contribute to development of analytical tools and approaches application in characterization of binding and mobility of heavy metals and organic compounds (xenobiotics) in continuous flow and soil biosystems. Within the solution of this aim, a wide range of analytical methods (gamma-spectrometry, UV-VIS spectrophotometry, AAS, X-ray fluorescence spectrometry, ion chromatography, and stripping volt-amperometry) and approaches (mathematical modelling - methods of nonlinear regression and in silico prediction modelling; chemometrics and statistical analysis of the data; single-step extraction methods, and lysimetry) were applied. In the first step of thesis solution, alternative sorbents of biological origin (biomass of microalgae, freshwater mosses, and waste biomass of hop) were obtained and physico-chemically characterized mainly in order to prediction of sorption capacities of Cd and synthetic dyes thioflavine T (TT), malachite green (MG) or methylene blue (MB) removal from single component or binary aqueous solutions and under conditions of batch or continuous flow systems. For these purposes, mathematical models of adsorption isotherms and models originated from chromatographic separation methods by application of methods of nonlinear regression analysis were used. In the second part of the work, methods of multivariate analysis in the evaluation of processes of synthetic dyes TT and MB binding in terms of the finding of relationships between sorption-desorption variables describing the stability of the bond and parameters defining the physic-chemical properties of river sediments and the environment of real or model waters were applied. In the last part of the work, a special laboratory lysimeter system was designed and applied within the soil biosystem defined by: soil additive (SA) derived from sewage sludge representing the source of microelements Zn and Cu <-> agriculturally used soil <-> soil solution <-> root

  11. Experimental researches about the influence of the additives for engine oils upon the work of the engine

    International Nuclear Information System (INIS)

    Dimitrovski, Mile; Mucevski, Kiril

    2003-01-01

    In this paper an attempt to get some cognitions about the influence of the additives for engine oils upon the working parameters of the internal combustion engines is made. During the experimental researches the changes of the basic parameters which determine the work of the engine, such as: the pressure of compression, the noise, the vibrations, the friction of the engine mechanism, the internal cleanliness of the engine and similar, were observed. It was conclude that the use of additives into the engine oil resulted with smoother work of the engine and cleaner exhausted as well. (Author)

  12. Component-Based Engineering of Knowledge-Enabled Systems: Research Vision and Strategy

    National Research Council Canada - National Science Library

    Goodburn, D

    2001-01-01

    ...'. The Software Systems Engineering (SSE) group of ITD is currently conducting research into new software engineering principles and practices, collectively referred to as component-based software...

  13. Global network on engineering education research and expertise in PBL

    DEFF Research Database (Denmark)

    Enemark, Stig; Kolmos, Anette; Moesby, Egon

    2006-01-01

    The UCPBL Centre for Problem Based Learning is based at Aalborg University, Denmark, known world-wide for its successful educational approach based on problem oriented project work. Due to more than 30 years of experience in utilizing PBL-learning principles in Engineering Education, an increasin....... This involves considerations concerning what is engineering education research – and how do we promote research based staff and educational development........ UCPBL Centre for Problem Based Learning is currently involved in a number of projects world wide focusing on institutional change toward a more student centred, project organized, and problem based approach to learning. The Centre is also establishing a UCPBL Global Network on Problem Based Learning...

  14. Global Relevance of Translational Research in Engineering and Project Management

    OpenAIRE

    Kriengsak Panuwatwanich

    2016-01-01

    In this issue of the EPPM journal, we include five interesting papers reporting on the research undertaken within the contexts of five different countries: Italy, Norway, Saudi Arabia, Romania and Iran. These papers address various key issues in engineering and project management, including green building rating system, agile project management, construction delays, awarding process of public construction projects and Building Information Modelling (BIM). A good mixture of both quantitative a...

  15. FY2011 Engineering Innovations, Research, and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Kip [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, Harry E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Poyneer, Lisa A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shusteff, Maxim [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Spadaccini, Christopher M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hopkins, Jonathan B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bernier, Joel V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); King, Michael J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Puso, Michael A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Weisgraber, Todd H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Goldstein, Noah C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sales, Ana Paula De Oliveira [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dehlinger, Dietrich A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotovsky, Jack [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kuntz, Joshua D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Voss, Lars F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wheeler, Elizabeth K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chang, John T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lehman, Sean K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vernon, Stephen P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tang, Vincent [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-04-24

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory’s Engineering Directorate for FY2011. These efforts exemplify Engineering’s nearly 60-year history of developing and applying the technology innovations needed for the Laboratory’s national security missions, and embody Engineering’s mission to “Enable program success today and ensure the Laboratory’s vitality tomorrow.

  16. Biomedical engineering education in developing countries: research synthesis.

    Science.gov (United States)

    Douglas, Tania S

    2011-01-01

    Biomedical engineering (BME) contributes to development through improving human health. This paper examines BME education to address the needs of developing countries. Components of different BME programs described in the literature are synthesized to represent what has been proposed or implemented for the production of graduates able to address health problems in a manner suited to the local environment in which they occur. Published research on BME education is reviewed with reference to problem context, interventions and their mechanisms, and intended outcomes.

  17. Collaboration in Research and Engineering for Advanced Technology.

    Energy Technology Data Exchange (ETDEWEB)

    Vrieling, P. Douglas [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2016-01-01

    SNL/CA proposes the Collaboration in Research and Engineering for Advanced Technology and Education (CREATE) facility to support customer-driven national security mission requirements while demonstrating a fiscally responsible approach to cost-control. SNL/CA realizes that due to the current backlog of capital projects in NNSA that following the normal Line Item process to procure capital funding is unlikely and therefore SNL/CA will be looking at all options including Alternative Financing.

  18. Compilation of contract research for the Materials Engineering Branch, Division of Engineering: Annual report for FY 1987

    International Nuclear Information System (INIS)

    1988-06-01

    This compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators, nondestructive examination of primary components, and in safety research for decommissioning and decontamination, on-site storage, and engineered safety features. This report, covering research conducted during Fiscal Year 1987 is the sixth volume of the series of NUREG-0975, ''Compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering.''

  19. Characterizing interdisciplinarity of researchers and research topics using web search engines.

    Science.gov (United States)

    Sayama, Hiroki; Akaishi, Jin

    2012-01-01

    Researchers' networks have been subject to active modeling and analysis. Earlier literature mostly focused on citation or co-authorship networks reconstructed from annotated scientific publication databases, which have several limitations. Recently, general-purpose web search engines have also been utilized to collect information about social networks. Here we reconstructed, using web search engines, a network representing the relatedness of researchers to their peers as well as to various research topics. Relatedness between researchers and research topics was characterized by visibility boost-increase of a researcher's visibility by focusing on a particular topic. It was observed that researchers who had high visibility boosts by the same research topic tended to be close to each other in their network. We calculated correlations between visibility boosts by research topics and researchers' interdisciplinarity at the individual level (diversity of topics related to the researcher) and at the social level (his/her centrality in the researchers' network). We found that visibility boosts by certain research topics were positively correlated with researchers' individual-level interdisciplinarity despite their negative correlations with the general popularity of researchers. It was also found that visibility boosts by network-related topics had positive correlations with researchers' social-level interdisciplinarity. Research topics' correlations with researchers' individual- and social-level interdisciplinarities were found to be nearly independent from each other. These findings suggest that the notion of "interdisciplinarity" of a researcher should be understood as a multi-dimensional concept that should be evaluated using multiple assessment means.

  20. Landfill gas distribution at the base of passive methane oxidation biosystems: Transient state analysis of several configurations.

    Science.gov (United States)

    Ahoughalandari, Bahar; Cabral, Alexandre R

    2017-11-01

    The design process of passive methane oxidation biosystems needs to include design criteria that account for the effect of unsaturated hydraulic behavior on landfill gas migration, in particular, restrictions to landfill gas flow due to the capillary barrier effect, which can greatly affect methane oxidation rates. This paper reports the results of numerical simulations performed to assess the landfill gas flow behavior of several passive methane oxidation biosystems. The concepts of these biosystems were inspired by selected configurations found in the technical literature. We adopted the length of unrestricted gas migration (LUGM) as the main design criterion in this assessment. LUGM is defined as the length along the interface between the methane oxidation and gas distribution layers, where the pores of the methane oxidation layer material can be considered blocked for all practical purposes. High values of LUGM indicate that landfill gas can flow easily across this interface. Low values of LUGM indicate greater chances of having preferential upward flow and, consequently, finding hotspots on the surface. Deficient designs may result in the occurrence of hotspots. One of the designs evaluated included an alternative to a concept recently proposed where the interface between the methane oxidation and gas distribution layers was jagged (in the form of a see-saw). The idea behind this ingenious concept is to prevent blockage of air-filled pores in the upper areas of the jagged segments. The results of the simulations revealed the extent of the capability of the different scenarios to provide unrestricted and conveniently distributed upward landfill gas flow. They also stress the importance of incorporating an appropriate design criterion in the selection of the methane oxidation layer materials and the geometrical form of passive biosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Research advances on tissue-engineered corneal endothelial cells transplantation

    Directory of Open Access Journals (Sweden)

    Si-Jie Zhao

    2015-02-01

    Full Text Available Due to the serious shortage of donor cornea materials and the donor limit, clinical popularization of penetrating keratoplasty is severely restricted. It is a hot spot of current research that applying tissue engineering in vitro to culture corneal endothelial cells(CECwith high density, regular hexagonal shape and healthy endothelial function. In this article, we reviewed the latest progress in the study of source of CEC seeder cells, selection of cultivating carries, type of CEC transplantation and immune mechanism that summarized the current research problems and made a prospect to the future.

  2. Active learning about research methodology in engineering education

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    Research methodology and theory of science have become important teaching subjects en engineering education as well as in higher education in general. This is rooted in the transition to a knowledge society. Today, it is argued by many that we are well on the way to an era beyond modernity...... and the sort of industrial economy that came with it. Whatever else the new era brings – the globalization of risks, environmental problems, new technologies, etc. – knowledge and the ability to seek, produce, apply and transform knowledge is of huge importance. However, research methodology and theory...

  3. Eco-innovation: The opportunities for engineering design research

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.

    2014-01-01

    Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that gi...... a flavour of the key trends and interesting topics that are emerging from the eco-innovation body of knowledge. We conclude by suggesting 10 areas where we see potential for the engineering design research community to contribute to the advancement of eco-innovation....

  4. NASA-HBCU Space Science and Engineering Research Forum Proceedings

    International Nuclear Information System (INIS)

    Sanders, Y.D.; Freeman, Y.B.; George, M.C.

    1989-01-01

    The proceedings of the Historically Black Colleges and Universities (HBCU) forum are presented. A wide range of research topics from plant science to space science and related academic areas was covered. The sessions were divided into the following subject areas: Life science; Mathematical modeling, image processing, pattern recognition, and algorithms; Microgravity processing, space utilization and application; Physical science and chemistry; Research and training programs; Space science (astronomy, planetary science, asteroids, moon); Space technology (engineering, structures and systems for application in space); Space technology (physics of materials and systems for space applications); and Technology (materials, techniques, measurements)

  5. From biomedical-engineering research to clinical application and industrialization

    Science.gov (United States)

    Taguchi, Tetsushi; Aoyagi, Takao

    2012-12-01

    The rising costs and aging of the population due to a low birth rate negatively affect the healthcare system in Japan. In 2011, the Council for Science and Technology Policy released the 4th Japan's Science and Technology Basic Policy Report from 2011 to 2015. This report includes two major innovations, 'Life Innovation' and 'Green Innovation', to promote economic growth. Biomedical engineering research is part of 'Life Innovation' and its outcomes are required to maintain people's mental and physical health. It has already resulted in numerous biomedical products, and new ones should be developed using nanotechnology-based concepts. The combination of accumulated knowledge and experience, and 'nanoarchitechtonics' will result in novel, well-designed functional biomaterials. This focus issue contains three reviews and 19 original papers on various biomedical topics, including biomaterials, drug-delivery systems, tissue engineering and diagnostics. We hope that it demonstrates the importance of collaboration among scientists, engineers and clinicians, and will contribute to the further development of biomedical engineering.

  6. Investigational research on eco-smart engines; Eco-smart engine no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated the trend of research on eco-smart engines into which optimization function of engine performance, high environmental-adaptability, etc. are integrated. The investigation was made in Japan and abroad on technologies of combustion, structure/material, control, design/analysis, systematization, etc. In case of Japan, specifications were established for three types of engines, subsonic, supersonic and hypersonic aircraft, and the research subjects to fulfil the specifications were extracted. In case of the U.S. and Europe, the survey was made of combustion, materials, noise, design concept, control, etc. Important subjects are selected in priority order. Namely, for the enhancement of efficiency, the following were taken up: three-dimensional fiber-reinforced large-size light-weight structure application technology, heat-resistant advanced-material structure damage-tolerant design technology, pseudo-vesicular structure transpiration cooling technology, etc. For the reduction of NOx emission, the paper took up technologies of environmentally optimization combustion, AI combustion control, and non-cooling combustor liner application. For the noise reduction, technologies of new inclination hole orientation noise absorbing structure material application, super noise control, and innovative CFD utilization low noise aerodynamics. Moreover, the results of fiscal 1997 were outlined to indicate the research in the next fiscal year. 14 figs., 10 tabs.

  7. Formation of research group for standard nuclear engineering software development

    International Nuclear Information System (INIS)

    Okajima, Shigeaki; Sakamoto, Yukio

    2011-01-01

    JAEA has set up a new research group for Standard Nuclear Engineering Software Development in the Nuclear Science and Engineering Directorate in April, 2011. The paper introduces the aim and role of this new group in the computer simulation technology important in nuclear science and industrial development. Hitherto, they made efforts mainly to develop new computer codes and database in Japan. The new group is expected to maintain and modify the developed codes and database in accordance to the users needs. Evaluated Nuclear Data Library, Monte Carlo N-Particle Transport Code System, Evaluated Actinide Data, Heavy Ion Transport code System, Monte Carlo Codes for Neutron and Photon Transport Calculation and others are included for explanation. (S. Ohno)

  8. Engineering Research Division report on reports calendar year 1978

    International Nuclear Information System (INIS)

    Lorton, M.E.

    1979-01-01

    Each year the Engineering Research Division of the Electronics Engineering Department has issued an internal report listing of all formal publications produced by the division during the calendar year. The report for 1978 is being issued in two sections (the second section has been expanded from the former format due to a change in collection of information implemented during the calendar year 1978). The first section (covering January 1978 through June 1978) lists the titles, report numbers, authors, dates, an author index, and, when applicable, conferences or journals to which the paper was submitted. The second section (covering July 1978 through December 1978) provides, in addition to the above information, abstracts for each paper, and an appendix with keywords. Future publication reports will include abstracts and a keyword appendix for all reports. It is expected that the new format will make the publication report a more useful document

  9. NATO Advanced Research Workshop on Molecular Engineering for Advanced Materials

    CERN Document Server

    Schaumburg, Kjeld

    1995-01-01

    An important aspect of molecular engineering is the `property directed' synthesis of large molecules and molecular assemblies. Synthetic expertise has advanced to a state which allows the assembly of supramolecules containing thousands of atoms using a `construction kit' of molecular building blocks. Expansion in the field is driven by the appearance of new building blocks and by an improved understanding of the rules for joining them in the design of nanometer-sized devices. Another aspect is the transition from supramolecules to materials. At present no single molecule (however large) has been demonstrated to function as a device, but this appears to be only a matter of time. In all of this research, which has a strongly multidisciplinary character, both existing and yet to be developed analytical techniques are and will remain indispensable. All this and more is discussed in Molecular Engineering for Advanced Materials, which provides a masterly and up to date summary of one of the most challenging researc...

  10. Compilation of contract research for the Materials Engineering Branch, Division of Engineering

    International Nuclear Information System (INIS)

    1991-03-01

    This compilation of annual reports for FY 1990 by contractors to the Materials Engineering Branch of the Nuclear Regulatory Commission Office of Research concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators, and nondestructive examination of primary system components. Separate abstracts have been prepared for each of the reports which are divided into the following categories: (1) vessel and piping fracture mechanics (including irradiation embrittlement); (2) pressure vessel surveillance dosimetry; (3) steam generators, aging, and environmental cracking; and (4) nondestructive examination techniques

  11. XVI 'Jacques-Louis Lions' Spanish-French School on Numerical Simulation in Physics and Engineering

    CERN Document Server

    Roldán, Teo; Torrens, Juan

    2016-01-01

    This book presents lecture notes from the XVI ‘Jacques-Louis Lions’ Spanish-French School on Numerical Simulation in Physics and Engineering, held in Pamplona (Navarra, Spain) in September 2014. The subjects covered include: numerical analysis of isogeometric methods, convolution quadrature for wave simulations, mathematical methods in image processing and computer vision, modeling and optimization techniques in food processes, bio-processes and bio-systems, and GPU computing for numerical simulation. The book is highly recommended to graduate students in Engineering or Science who want to focus on numerical simulation, either as a research topic or in the field of industrial applications. It can also benefit senior researchers and technicians working in industry who are interested in the use of state-of-the-art numerical techniques in the fields addressed here. Moreover, the book can be used as a textbook for master courses in Mathematics, Physics, or Engineering.

  12. An Engineering Research Program for High School Science Teachers: Year Two Changes and Results

    Science.gov (United States)

    DeJong, Brian P.; Yelamarthi, Kumar; Kaya, Tolga

    2016-01-01

    The research experiences for teachers program at Central Michigan University was initiated to team in-service and pre-service teachers with undergraduate engineering students and engineering faculty, in an engineering research setting. During the six-week program, teachers learn engineering concepts and develop high-school instructional material…

  13. Peer review, basic research, and engineering: Defining a role for QA professionals in basic research environments

    Energy Technology Data Exchange (ETDEWEB)

    Bodnarczuk, M.

    1989-02-01

    Within the context of doing basic research, this paper seeks to answer four major questions: (1) What is the authority structure of science. (2) What is peer review. (3) Where is the interface between basic physics research and standard engineering. and (4) Given the conclusions to the first three questions, what is the role of the QA professional in a basic research environment like Fermilab. 23 refs.

  14. Eco-innovation: The opportunities for engineering design research

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.

    2014-01-01

    Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that gi...... a flavour of the key trends and interesting topics that are emerging from the eco-innovation body of knowledge. We conclude by suggesting 10 areas where we see potential for the engineering design research community to contribute to the advancement of eco-innovation.......Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that give...

  15. Nuclear engineering aspects of glioma BNCT research in Italy

    International Nuclear Information System (INIS)

    Curzio, G.; Mazzini, M.

    1998-01-01

    A research project on Boron Neutron Capture Therapy (BNCZ) of gliomas has been set up in Italy, with the participation of Departments of Oncology and Mechanical and Nuclear Construction (DCMN) of the University of Pisa, as well as the Neuroscience and Physics Departments of the Universities of Roma. The specific objective of DCMN Research Unit is the study of the physical-engineering aspects related to BNCT. The paper outlines the research lines in progress at DCMN: Monte Carlo calculations of neutron dose distribution for BNCT treatment planning; measurements of neutron fluxes, spectra and doses by neutron detectors specifically set up; design of modifications to the nuclear reactors of ENEA Casaccia Center. In particular, the paper emphasizes the most original contributions on dosimetric aspects, both from informatic and experimental points of view.(author)

  16. Integrating Global Hydrology Into Graduate Engineering Education and Research

    Science.gov (United States)

    Griffis, V. W.

    2007-12-01

    Worldwide, polluted water affects the health of 1.2 billion people and contributes to the death of 15 million children under five every year. In addition poor environmental quality contributes to 25 per cent of all preventable ill health in the world. To address some of these problems, at the 2002 World Summit on Sustainable Development, the world community set the goal of halving, by the year 2015, the proportion of people without access to safe drinking water and basic sanitation. Solving sanitation and water resource management problems in any part of the world presents an interdisciplinary, complex challenge. However, when we attempt to solve these problems in an international context, our technical approaches must be tempered with cultural sensitivity and extraordinary management strategies. To meet this challenge, Michigan Tech has developed a unique global partnership with the U.S. Peace Corps to address our acknowledgement of the importance of placing engineering solutions in a global context. The program has graduated 30 students. Program enrollment is now over 30 and over 20 countries have hosted our students. The objective of this presentation is to demonstrate how this unique partnership can be integrated with graduate engineering education and research and also show how such a program may attract a more diverse student population into engineering. All graduate students enrolled in our Master's International Program in Civil and Environmental Engineering must complete specific coursework requirements before departing for their international experience. In CE5993 (Field Engineering in the Developing World) students learn to apply concepts of sustainable development and appropriate technology in the developing world. In FW5770 (Rural Community Development Planning and Analysis) students learn how one involves a community in the decision making process. A common theme in both courses is the role of woman in successful development projects. Technical

  17. Annual report of Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo, fiscal year 1994

    International Nuclear Information System (INIS)

    1995-08-01

    This annual report is the summary of the research and education activities, the state of operating research facilities and others in fiscal year 1994 in this Research Laboratory. In this Research Laboratory, there are four main installations, namely the fast neutron source reactor 'Yayoi', the electron linear accelerator, the basic experiment facility for the design of nuclear fusion reactor blanket and the heavy irradiation research facility. The former two are put to the joint utilization by all Japanese universities, the blanket is to that within Faculty of Engineering, and the HIT is to that within this university. The fast neutron science research facility, the installation of which was approved in 1993 as the ancillary equipment of the Yayoi, has been put to the joint utilization for all Japan, and achieved good results. In this report, the management and operation of these main installations, research activities, the publication of research papers,graduation and degree theses, the publication of research papers, graduation and degree theses, the events in the Laboratory for one year, the list of the visitors to the Laboratory, the list of the records of official trips to foreign countries and others, and the list of UTNL reports are described. (K.I.)

  18. Enabling Arctic Research Through Science and Engineering Partnerships

    Science.gov (United States)

    Kendall, E. A.; Valentic, T. A.; Stehle, R. H.

    2014-12-01

    Under an Arctic Research Support and Logistics contract from NSF (GEO/PLR), SRI International, as part of the CH2M HILL Polar Services (CPS) program, forms partnerships with Arctic research teams to provide data transfer, remote operations, and safety/operations communications. This teamwork is integral to the success of real-time science results and often allows for unmanned operations which are both cost-effective and safer. The CPS program utilizes a variety of communications networks, services and technologies to support researchers and instruments throughout the Arctic, including Iridium, VSAT, Inmarsat BGAN, HughesNet, TeleGreenland, radios, and personal locator beacons. Program-wide IT and communications limitations are due to the broad categories of bandwidth, availability, and power. At these sites it is essential to conserve bandwidth and power through using efficient software, coding and scheduling techniques. There are interesting new products and services on the horizon that the program may be able to take advantage of in the future such as Iridium NEXT, Inmarsat Xpress, and Omnispace mobile satellite services. Additionally, there are engineering and computer software opportunities to develop more efficient products. We will present an overview of science/engineering partnerships formed by the CPS program, discuss current limitations and identify future technological possibilities that could further advance Arctic science goals.

  19. Toward ethical norms and institutions for climate engineering research

    International Nuclear Information System (INIS)

    Morrow, David R; Kopp, Robert E; Oppenheimer, Michael

    2009-01-01

    Climate engineering (CE), the intentional modification of the climate in order to reduce the effects of increasing greenhouse gas concentrations, is sometimes touted as a potential response to climate change. Increasing interest in the topic has led to proposals for empirical tests of hypothesized CE techniques, which raise serious ethical concerns. We propose three ethical guidelines for CE researchers, derived from the ethics literature on research with human and animal subjects, applicable in the event that CE research progresses beyond computer modeling. The Principle of Respect requires that the scientific community secure the global public's consent, voiced through their governmental representatives, before beginning any empirical research. The Principle of Beneficence and Justice requires that researchers strive for a favorable risk-benefit ratio and a fair distribution of risks and anticipated benefits, all while protecting the basic rights of affected individuals. Finally, the Minimization Principle requires that researchers minimize the extent and intensity of each experiment by ensuring that no experiments last longer, cover a greater geographical extent, or have a greater impact on the climate, ecosystem, or human welfare than is necessary to test the specific hypotheses in question. Field experiments that might affect humans or ecosystems in significant ways should not proceed until a full discussion of the ethics of CE research occurs and appropriate institutions for regulating such experiments are established.

  20. Toward ethical norms and institutions for climate engineering research

    Science.gov (United States)

    Morrow, David R.; Kopp, Robert E.; Oppenheimer, Michael

    2009-10-01

    Climate engineering (CE), the intentional modification of the climate in order to reduce the effects of increasing greenhouse gas concentrations, is sometimes touted as a potential response to climate change. Increasing interest in the topic has led to proposals for empirical tests of hypothesized CE techniques, which raise serious ethical concerns. We propose three ethical guidelines for CE researchers, derived from the ethics literature on research with human and animal subjects, applicable in the event that CE research progresses beyond computer modeling. The Principle of Respect requires that the scientific community secure the global public's consent, voiced through their governmental representatives, before beginning any empirical research. The Principle of Beneficence and Justice requires that researchers strive for a favorable risk-benefit ratio and a fair distribution of risks and anticipated benefits, all while protecting the basic rights of affected individuals. Finally, the Minimization Principle requires that researchers minimize the extent and intensity of each experiment by ensuring that no experiments last longer, cover a greater geographical extent, or have a greater impact on the climate, ecosystem, or human welfare than is necessary to test the specific hypotheses in question. Field experiments that might affect humans or ecosystems in significant ways should not proceed until a full discussion of the ethics of CE research occurs and appropriate institutions for regulating such experiments are established.

  1. Research and engineering assessment of biological solubilization of phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, R.D.; McIlwain, M.E.; Losinski, S.J.; Taylor, D.D.

    1993-03-01

    This research and engineering assessment examined a microbial phosphate solubilization process as a method of recovering phosphate from phosphorus containing ore compared to the existing wet acid and electric arc methods. A total of 860 microbial isolates, collected from a range of natural environments were tested for their ability to solubilize phosphate from rock phosphate. A bacterium (Pseudomonas cepacia) was selected for extensive characterization and evaluation of the mechanism of phosphate solubilization and of process engineering parameters necessary to recover phosphate from rock phosphate. These studies found that concentration of hydrogen ion and production of organic acids arising from oxidation of the carbon source facilitated microbial solubilization of both pure chemical insoluble phosphate compounds and phosphate rock. Genetic studies found that phosphate solubilization was linked to an enzyme system (glucose dehydrogenase). Process-related studies found that a critical solids density of 1% by weight (ore to liquid) was necessary for optimal solubilization. An engineering analysis evaluated the cost and energy requirements for a 2 million ton per year sized plant, whose size was selected to be comparable to existing wet acid plants.

  2. Organic Rankine cycle - review and research directions in engine applications

    Science.gov (United States)

    Panesar, Angad

    2017-11-01

    Waste heat to power conversion using Organic Rankine Cycles (ORC) is expected to play an important role in CO2 reductions from diesel engines. Firstly, a review of automotive ORCs is presented focusing on the pure working fluids, thermal architectures and expanders. The discussion includes, but is not limited to: R245fa, ethanol and water as fluids; series, parallel and cascade as architectures; dry saturated, superheated and supercritical as expansion conditions; and scroll, radial turbine and piston as expansion machines. Secondly, research direction in versatile expander and holistic architecture (NOx + CO2) are proposed. Benefits of using the proposed unconventional approaches are quantified using Ricardo Wave and Aspen HYSYS for diesel engine and ORC modelling. Results indicate that, the implementation of versatile piston expander tolerant to two-phase and using cyclopentane can potentially increase the highway drive cycle power by 8%. Furthermore, holistic architecture offering complete utilisation of charge air and exhaust recirculation heat increased the performance noticeably to 5% of engine power at the design point condition.

  3. Nuclear Explosion Monitoring Research and Engineering Program - Strategic Plan

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Leslie A. [DOE/NNSA

    2004-09-01

    The Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Nuclear Explosion Monitoring Research and Engineering (NEM R&E) Program is dedicated to providing knowledge, technical expertise, and products to US agencies responsible for monitoring nuclear explosions in all environments and is successful in turning scientific breakthroughs into tools for use by operational monitoring agencies. To effectively address the rapidly evolving state of affairs, the NNSA NEM R&E program is structured around three program elements described within this strategic plan: Integration of New Monitoring Assets, Advanced Event Characterization, and Next-Generation Monitoring Systems. How the Program fits into the National effort and historical accomplishments are also addressed.

  4. STUDY OF TRENDS AND PERSPECTIVES OF INDUSTRIAL ENGINEERING RESEARCH

    Directory of Open Access Journals (Sweden)

    H. Dastkhan

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Industrial engineering is an engineering discipline which, because of its multi-disciplinary nature, has played an important role in the development and optimization of different systems at macro and micro levels. In this paper, the results of a research to study the position and trend of Industrial Engineering research in recent years are described. The data from a sample of 7 114 IE-related articles from international journals during the last 27 years were used for the analysis. The results showed that the development of IE in many countries has a strong correlation with their industrial and economic development. However, IE research topics are spreading in other management and engineering departments and so there is a need to redefine the discipline and its specific areas of interest. According to the prediction made using time series analysis, the most favorite fields of IE research in future will be on subjects related to information technology, intelligent systems, optimization, quality, and supply chain management.

    AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is 'n ingenieursdissipline wat vanweë die multi-dissiplinêre aard daarvan 'n belangrike rol gespeel het in die optimisering van verskillende sisteme op makroen mikrovlak. Hierdie artikel hou die resultate voor van 'n navorsingsprojek wat onderneem is om die posisie en rigting van Bedryfsingenieursnavorsing in onlangse jare te bepaal. Die data van 'n monster van 7 114 Bedryfsingenieursverwante artikels wat verskyn het in internasionale joernale oor die afgelope 27 jaar is gebruik vir die ontleding. Die resultate toon dat die groei van Bedryfsingenieurswese in verskeie lande sterk korreleer met industriële en ekonomiese ontwikkeling. Tog blyk dit dat die navorsingsonderwerpe van Bedryfsingenieurswese sprei na ander bestuurs- en ingenieursdepartemente en dus bestaan daar ‘n nodigheid om die dissipline en die spesifieke belangstellingsvelde te herdefinieer

  5. Semiotic Engineering Methods for Scientific Research in HCI

    CERN Document Server

    Sieckenius de Souza, Clarisse

    2009-01-01

    Semiotic engineering was originally proposed as a semiotic approach to designing user interface languages. Over the years, with research done at the Department of Informatics of the Pontifical Catholic University of Rio de Janeiro, it evolved into a semiotic theory of human-computer interaction (HCI). It views HCI as computer-mediated communication between designers and users at interaction time. The system speaks for its designers in various types of conversations specified at design time. These conversations communicate the designers' understanding of who the users are, what they know the us

  6. Compilation of contract research for the Materials Engineering Branch, Division of Engineering: Annual report for FY 1988

    International Nuclear Information System (INIS)

    1989-05-01

    This compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators, nondestructive examination of primary components, and in safety research for decommissioning and decontamination, on-site storage and engineered safety features. The Materials Engineering Branch assembles abbreviated reports from all the branch contractors and publishes them in a single annual report as soon after the end of the year as possible so that the information developed throughout the year can be promptly used in the safety-regulatory process. This report, covering research conducted during Fiscal Year 1988 is the seventh volume of the series of NUREG-0975, ''Compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering.'' Individual projects are processed separately for the data bases

  7. Genetically engineered mouse models in oncology research and cancer medicine.

    Science.gov (United States)

    Kersten, Kelly; de Visser, Karin E; van Miltenburg, Martine H; Jonkers, Jos

    2017-02-01

    Genetically engineered mouse models (GEMMs) have contributed significantly to the field of cancer research. In contrast to cancer cell inoculation models, GEMMs develop de novo tumors in a natural immune-proficient microenvironment. Tumors arising in advanced GEMMs closely mimic the histopathological and molecular features of their human counterparts, display genetic heterogeneity, and are able to spontaneously progress toward metastatic disease. As such, GEMMs are generally superior to cancer cell inoculation models, which show no or limited heterogeneity and are often metastatic from the start. Given that GEMMs capture both tumor cell-intrinsic and cell-extrinsic factors that drive de novo tumor initiation and progression toward metastatic disease, these models are indispensable for preclinical research. GEMMs have successfully been used to validate candidate cancer genes and drug targets, assess therapy efficacy, dissect the impact of the tumor microenvironment, and evaluate mechanisms of drug resistance. In vivo validation of candidate cancer genes and therapeutic targets is further accelerated by recent advances in genetic engineering that enable fast-track generation and fine-tuning of GEMMs to more closely resemble human patients. In addition, aligning preclinical tumor intervention studies in advanced GEMMs with clinical studies in patients is expected to accelerate the development of novel therapeutic strategies and their translation into the clinic. © 2016 The Authors. Published under the terms of the CC BY 4.0 license.

  8. 75 FR 48411 - Research, Engineering and Development Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-08-10

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development.... 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development (R, E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: September...

  9. 34 CFR 350.30 - What requirements must a Rehabilitation Engineering Research Center meet?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false What requirements must a Rehabilitation Engineering... DISABILITY AND REHABILITATION RESEARCH PROJECTS AND CENTERS PROGRAM What Rehabilitation Engineering Research Centers Does the Secretary Assist? § 350.30 What requirements must a Rehabilitation Engineering Research...

  10. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1985. Volume 4

    International Nuclear Information System (INIS)

    1986-03-01

    The compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1985, is the fourth volume of the series of NUREG-0975, Compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  11. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1984. Volume 3

    International Nuclear Information System (INIS)

    1985-04-01

    This compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievments in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1984, is the third volume of the series of NUREG-0975, compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  12. Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research: scientific and cultural exchange in undergraduate engineering.

    Science.gov (United States)

    Wisneski, Andrew D; Huang, Lixia; Hong, Bo; Wang, Xiaoqin

    2011-01-01

    A model for an international undergraduate biomedical engineering research exchange program is outlined. In 2008, the Johns Hopkins University in collaboration with Tsinghua University in Beijing, China established the Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research. Undergraduate biomedical engineering students from both universities are offered the opportunity to participate in research at the overseas institution. Programs such as these will not only provide research experiences for undergraduates but valuable cultural exchange and enrichment as well. Currently, strict course scheduling and rigorous curricula in most biomedical engineering programs may present obstacles for students to partake in study abroad opportunities. Universities are encouraged to harbor abroad opportunities for undergraduate engineering students, for which this particular program can serve as a model.

  13. I'm Graduating This Year! So What IS an Engineer Anyway? Research Brief

    Science.gov (United States)

    Matusovich, Holly; Streveler, Ruth; Miller, Ron; Olds, Barbara

    2009-01-01

    It is often assumed that graduating engineering students readily envision what it means to be an engineer and what type of work they will be doing as engineers in the future. How can one know if this is true? This research begins to answer these questions by aiming to understand undergraduate engineering students' perceptions of themselves as…

  14. Enabling personalized implant and controllable biosystem development through 3D printing.

    Science.gov (United States)

    Nagarajan, Neerajha; Dupret-Bories, Agnes; Karabulut, Erdem; Zorlutuna, Pinar; Vrana, Nihal Engin

    The impact of additive manufacturing in our lives has been increasing constantly. One of the frontiers in this change is the medical devices. 3D printing technologies not only enable the personalization of implantable devices with respect to patient-specific anatomy, pathology and biomechanical properties but they also provide new opportunities in related areas such as surgical education, minimally invasive diagnosis, medical research and disease models. In this review, we cover the recent clinical applications of 3D printing with a particular focus on implantable devices. The current technical bottlenecks in 3D printing in view of the needs in clinical applications are explained and recent advances to overcome these challenges are presented. 3D printing with cells (bioprinting); an exciting subfield of 3D printing, is covered in the context of tissue engineering and regenerative medicine and current developments in bioinks are discussed. Also emerging applications of bioprinting beyond health, such as biorobotics and soft robotics, are introduced. As the technical challenges related to printing rate, precision and cost are steadily being solved, it can be envisioned that 3D printers will become common on-site instruments in medical practice with the possibility of custom-made, on-demand implants and, eventually, tissue engineered organs with active parts developed with biorobotics techniques. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. Researching new social (political movements as protagonists of social engineering

    Directory of Open Access Journals (Sweden)

    Šuvaković Uroš V.

    2014-01-01

    Full Text Available The article is a retrospective of the theoretical research of the sociologist Slobodan Antonic dedicated to evolution and strengthening of two important social (political movements: radical-feminist and -LGBT. Contesting the scientific-methodological basis of theories that 'explain' them, the author emphasizes the importance of the neoliberal ideological platform on which these theories and derived movements are based. At the same time, numerous dangers that social engineering for which their members plead for are pointed out. Regardless the radical changes of social consciousness, social values and power relations in the contemporary society for which these movements plead for, they actually represent pro-systematic movements that help in preservation of neoliberal capitalism with their demands.

  16. Machine learning, medical diagnosis, and biomedical engineering research - commentary.

    Science.gov (United States)

    Foster, Kenneth R; Koprowski, Robert; Skufca, Joseph D

    2014-07-05

    A large number of papers are appearing in the biomedical engineering literature that describe the use of machine learning techniques to develop classifiers for detection or diagnosis of disease. However, the usefulness of this approach in developing clinically validated diagnostic techniques so far has been limited and the methods are prone to overfitting and other problems which may not be immediately apparent to the investigators. This commentary is intended to help sensitize investigators as well as readers and reviewers of papers to some potential pitfalls in the development of classifiers, and suggests steps that researchers can take to help avoid these problems. Building classifiers should be viewed not simply as an add-on statistical analysis, but as part and parcel of the experimental process. Validation of classifiers for diagnostic applications should be considered as part of a much larger process of establishing the clinical validity of the diagnostic technique.

  17. Research Prototype: Automated Analysis of Scientific and Engineering Semantics

    Science.gov (United States)

    Stewart, Mark E. M.; Follen, Greg (Technical Monitor)

    2001-01-01

    Physical and mathematical formulae and concepts are fundamental elements of scientific and engineering software. These classical equations and methods are time tested, universally accepted, and relatively unambiguous. The existence of this classical ontology suggests an ideal problem for automated comprehension. This problem is further motivated by the pervasive use of scientific code and high code development costs. To investigate code comprehension in this classical knowledge domain, a research prototype has been developed. The prototype incorporates scientific domain knowledge to recognize code properties (including units, physical, and mathematical quantity). Also, the procedure implements programming language semantics to propagate these properties through the code. This prototype's ability to elucidate code and detect errors will be demonstrated with state of the art scientific codes.

  18. Molecularly Engineered Energy Materials, an Energy Frontier Research Center

    Energy Technology Data Exchange (ETDEWEB)

    Ozolins, Vidvuds [Univ. of California, Los Angeles, CA (United States). Materials Science and Engineering Dept.

    2016-09-28

    Molecularly Engineered Energy Materials (MEEM) was established as an interdisciplinary cutting-edge UCLA-based research center uniquely equipped to attack the challenge of rationally designing, synthesizing and testing revolutionary new energy materials. Our mission was to achieve transformational improvements in the performance of materials via controlling the nano-and mesoscale structure using selectively designed, earth-abundant, inexpensive molecular building blocks. MEEM has focused on materials that are inherently abundant, can be easily assembled from intelligently designed building blocks (molecules, nanoparticles), and have the potential to deliver transformative economic benefits in comparison with the current crystalline-and polycrystalline-based energy technologies. MEEM addressed basic science issues related to the fundamental mechanisms of carrier generation, energy conversion, as well as transport and storage of charge and mass in tunable, architectonically complex materials. Fundamental understanding of these processes will enable rational design, efficient synthesis and effective deployment of novel three-dimensional material architectures for energy applications. Three interrelated research directions were initially identified where these novel architectures hold great promise for high-reward research: solar energy generation, electrochemical energy storage, and materials for CO2 capture. Of these, the first two remained throughout the project performance period, while carbon capture was been phased out in consultation and with approval from BES program manager.

  19. POLLUTION PREVENTION RESEARCH ONGOING - EPA'S RISK REDUCTION ENGINEERING LABORATORY

    Science.gov (United States)

    The mission of the Risk Reduction Engineering Laboratory is to advance the understanding, development and application of engineering solutions for the prevention or reduction of risks from environmental contamination. This mission is accomplished through basic and applied researc...

  20. Assessment report of research and development activities. Activity: 'Nuclear science and engineering research' (Interim report)

    International Nuclear Information System (INIS)

    2013-11-01

    Japan Atomic Energy Agency (hereinafter referred to as 'JAEA') consults an assessment committee, 'Evaluation Committee of Research Activities for Nuclear Science and Engineering' (hereinafter referred to as 'Committee') for interim assessment of 'Nuclear Science and Engineering,' in accordance with 'General Guideline for the Evaluation of Government Research and Development (R and D) Activities' by Cabinet Office, Government of Japan, 'Guideline for Evaluation of R and D in Ministry of Education, Culture, Sports, Science and Technology' and 'Regulation on Conduct for Evaluation of R and D Activities' by the JAEA. In response to the JAEA's request, the Committee assessed the research program of the Nuclear Science and Engineering Directorate (hereinafter referred to as 'NSED') and Center for Computational Science and e-Systems (hereinafter referred to as 'CCSE') during the period of about four years from September 2008 to September 2012. The Committee evaluated the management and research activities of the NSED and the CCSE based on explanatory documents prepared by the NSED and the CCSE, and oral presentations with questions-and-answers by unit managers etc. A CD-ROM is attached as an appendix. (J.P.N.)

  1. 76 FR 46359 - Announcing the Nineteenth Public Meeting of the Crash Injury Research and Engineering Network...

    Science.gov (United States)

    2011-08-02

    ... Research and Engineering Network (CIREN) AGENCY: National Highway Traffic Safety Administration (NHTSA... members of the Crash Injury Research and Engineering Network. CIREN is a collaborative effort to conduct... computer network. The current CIREN model utilizes two types of centers, medical and engineering. Medical...

  2. Courseware Engineering Outlined: An Overview of Some Research Issues.

    Science.gov (United States)

    De Diana, Italo; van Schaik, Paul

    1993-01-01

    Defines courseware engineering (CE) and discusses how it differs from software engineering. Topics addressed include the goals of courseware engineering; a classification of tasks; costs; aspects of knowledge representation; the structure of knowledge in CE; processes in knowledge acquisition; and knowledge base validation. (Contains 48…

  3. Education and research in biomedical engineering of the Budapest University of Technology and Economics.

    Science.gov (United States)

    Benyó, Z

    2006-03-01

    Biomedical Engineering is a relatively new interdisciplinary science. This review paper presents the biomedical engineering activity, which is carried out at the Budapest University of Technology and Economics (BUTE) and its partner institutions. In the first parts the main goals and the curriculum of the Biomedical Engineering Education Program is presented. The second part of the paper summarizes the most important biomedical engineering researches most of them carried out in the Biomedical Engineering Laboratory of BUTE.

  4. Researching primary engineering education: UK perspectives, an exploratory study

    Science.gov (United States)

    Clark, Robin; Andrews, Jane

    2010-10-01

    This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

  5. A systematic literature review of resilience engineering: Research areas and a research agenda proposal

    International Nuclear Information System (INIS)

    Righi, Angela Weber; Saurin, Tarcisio Abreu; Wachs, Priscila

    2015-01-01

    Resilience engineering (RE) has been advocated as a new safety management paradigm, compatible with the nature of complex socio-technical systems. This study aims to identify the research areas and to propose a research agenda for RE, based on a systematic literature review that encompasses 237 studies from 2006 to 2014. Six research areas are identified: theory of RE; identification and classification of resilience; safety management tools; analysis of accidents; risk assessment; and training. The area “theory of RE” accounted for 52% of the studies, and it indicates that research has emphasized the description of how resilient performance occurs. The proposal for a research agenda is focused on: refining key constructs; positioning RE in relation to other theories; exploring other research strategies in addition to case-based studies; investigating barriers for implementing RE; and balancing the importance on describing and understanding resilience with the emphasis on the design of resilient systems, and the evaluation of these designs. - Highlights: • Six research areas on RE are identified. • A research agenda for RE is proposed. • RE research is mostly descriptive and based on case studies. • Design science is suggested as a research strategy for RE. • Five domains account for 75% of the reviewed studies

  6. Main research activities at the Institute of Energy Process Engineering Research Centre Juelich Germany

    International Nuclear Information System (INIS)

    Achenbach, E.

    1995-06-01

    This report summarizes four lectures been held during the author's seven-week stay at the Department of High Temperature Engineering in the period from February 2nd to March 23rd in 1995 under the JAERI foreign researcher inviting program. Though the Institute of Energy Process Engineering(IEV) in the Research Centre Juelich(KFA), has recently changed the subject of research from nuclear technology of high-temperature gas-cooled reactors(HTGRs) to fuel cell technology, there are many common items of research. In particular, the following topics presented in the lectures are of mutual interest: 1)Methane-steam reforming used at JAERI as HTGR heat utilization system and applied at KFA to internal reforming in the high temperature Solid Oxide Fuel Cell(SOFC), 2)Technology and modeling of high temperature electrolysis at JAERI as the inverse process of the SOFC developed at KFA, 3)Flow simulation of branched systems treated at JAERI for the development of high temperature heat exchangers and performed at KFA with respect to the SOFC manifold system, 4)Fundamental aspects of heat and mass transfer. The report should help to create a basis of discussing the above mentioned problems and to stimulate the research work at JAERI. (author)

  7. A Review of Research on Bird Impacting on Jet Engines

    Science.gov (United States)

    Jin, Yuecheng

    2018-03-01

    Bird strikes can lead to permanent deformations, sudden decrease of thrust, even engine failure during the flight. Bird strikes on rotating blades can also cause slices of birds hitting other parts which may lead to greater damages. Bird strikes cannot be completely avoided. However, reduction of bird impacting on jet engines can be achieved by suitable design and manufacturing, through the mathematical modelling, simulation analysis and practical experiment of jet engines.

  8. Crash Injury Research and Engineering Network (CIREN) - CIREN data files

    Data.gov (United States)

    Department of Transportation — The CIREN process combines prospective data collection with professional multidisciplinary analysis of medical and engineering evidence to determine injury causation...

  9. Summary of entire research achievements of creative engineering research program on nuclear fuel cycle

    International Nuclear Information System (INIS)

    Takenaka, Shingo; Ikegami, Tetsuo

    2008-03-01

    Creative Engineering Research Program on Nuclear Fuel Cycle (former In-house Innovative Research Encouraging Program) was implemented from FY 2001 to FY 2007 in order to support such in-house researches that create innovative new concepts and aim technical break-through. Totally 37 applications have been received and 14 research themes have been accepted and been performed in this program. As for the research achievements of the 14 research themes, first author papers accepted by scientific journals and by science councils were 47 and 32, respectively, and oral presentations at scientific societies were 99. Furthermore, interpretive articles for scientific journals, requested lectures, patents, and prize winnings were 13, 30, 8, and 3, respectively. Consequently, it can be evaluated that the research achievements resulted from this program are generally in high level and that the expectations, at the starting point of this program, to activate the innovative research activities have been accomplished. In this report, the final reports of the 14 research themes together with the outline of this program are included. (author)

  10. A Unified Checklist for Observational and Experimental Research in Software Engineering (Version 1)

    NARCIS (Netherlands)

    Wieringa, Roelf J.

    2012-01-01

    Current checklists for empirical software engineering cover either experimental research or case study research but ignore the many commonalities that exist across all kinds of empirical research. Identifying these commonalities, and explaining why they exist, would enhance our understanding of

  11. Centre for Engineering Research Inc. - 1995 annual report

    International Nuclear Information System (INIS)

    Rubuliak, S.; Bridges, L.

    1995-01-01

    Highlights of some of C-FER's research projects in the energy industry were presented. Accomplishments in 1995 were underscored by tangible results creating value through engineering innovation, realizing strategic advantages, and enhancing system safety and reliability. Among the projects described was the success of the first field test of an AQWANOT (trademark) prototype for downhole separation of water and oil. The test demonstrated the feasibility of combining hydrocyclones and a modified multi-stream downhole pump for simultaneous oil production, downhole water separation and same-well reinjection of 'produced' water. The technology has potential in offshore prospects, as well as for natural gas producers. C-FER's software entitled PIRAMID (pipeline risk analysis for maintenance and inspection decisions) quantifies the impact of in-line inspections on the probability of line failure due to metal loss by corrosion and uses the information to optimize tool selection, defect repair criteria and inspection intervals. C-FER's special environments laboratory (SEL), a facility for tests requiring safe containment of toxic and flammable gases and explosions, was described. A financial summary of the company's operations was included. tabs., figs

  12. Glass-based integrated optical splitters: engineering oriented research

    Science.gov (United States)

    Hao, Yinlei; Zheng, Weiwei; Yang, Jianyi; Jiang, Xiaoqing; Wang, Minghua

    2010-10-01

    Optical splitter is one of most typical device heavily demanded in implementation of Fiber To The Home (FTTH) system. Due to its compatibility with optical fibers, low propagation loss, flexibility, and most distinguishingly, potentially costeffectiveness, glass-based integrated optical splitters made by ion-exchange technology promise to be very attractive in application of optical communication networks. Aiming at integrated optical splitters applied in optical communication network, glass ion-exchange waveguide process is developed, which includes two steps: thermal salts ion-exchange and field-assisted ion-diffusion. By this process, high performance optical splitters are fabricated in specially melted glass substrate. Main performance parameters of these splitters, including maximum insertion loss (IL), polarization dependence loss (PDL), and IL uniformity are all in accordance with corresponding specifications in generic requirements for optic branching components (GR-1209-CORE). In this paper, glass based integrated optical splitters manufacturing is demonstrated, after which, engineering-oriented research work results on glass-based optical splitter are presented.

  13. Biomedical Engineering Bionanosystems Research at Louisiana Tech University

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, James; Lvov, Yuri; Hegab, Hisham; Snow, Dale; Wilson, Chester; McDonald, John; Walker, Lynn; Pratt, Jon; Davis, Despina; Agarwal, Mangilal; DeCoster, Mark; Feng, June; Que, Long; O' Neal, Chad; Guilbeau, Eric; Zivanovic, Sandra; Dobbins, Tabbetha; Gold, Scott; Mainardi, Daniela; Gowda, Shathabish; Napper, Stan

    2010-03-25

    The nature of this project is to equip and support research in nanoengineered systems for biomedical, bioenvironmental, and bioenergy applications. Funds provided by the Department of Energy (DoE) under this Congressional Directive were used to support two ongoing research projects at Louisiana Tech University in biomedical, bioenvironmental, and bioenergy applications. Two major projects (Enzyme Immobilization for Large Scale Reactors to Reduce Cellulosic Ethanol Costs, and Nanocatalysts for Coal and Biomass Conversion to Diesel Fuel) and to fund three to five additional seed projects were funded using the project budget. The project funds also allowed the purchase and repair of sophisticated research equipment that will support continued research in these areas for many years to come. Project funds also supported faculty, graduate students, and undergraduate students, contributing to the development of a technically sophisticated work force in the region and the State. Descriptions of the technical accomplishments for each funded project are provided. Biofuels are an important part of the solution for sustainable transportation fuel and energy production for the future. Unfortunately, the country's appetite for fuel cannot be satisfied with traditional sugar crops such as sugar cane or corn. Emerging technologies are allowing cellulosic biomass (wood, grass, stalks, etc.) to also be converted into ethanol. Cellulosic ethanol does not compete with food production and it has the potential to decrease greenhouse gas (GHG) emissions by 86% versus current fossil fuels (current techniques for corn ethanol only reduce greenhouse gases by 19%). Because of these advantages, the federal government has made cellulosic ethanol a high priority. The Energy Independence and Security Act of 2007 (EISA) requires a minimum production of at least 16 billion gallons of cellulosic ethanol by 2022. Indeed, the Obama administration has signaled an ambitious commitment of achieving

  14. A Research Program on Artificial Intelligence in Process Engineering.

    Science.gov (United States)

    Stephanopoulos, George

    1986-01-01

    Discusses the use of artificial intelligence systems in process engineering. Describes a new program at the Massachusetts Institute of Technology which attempts to advance process engineering through technological advances in the areas of artificial intelligence and computers. Identifies the program's hardware facilities, software support,…

  15. The Future for Industrial Engineers: Education and Research Opportunities

    Science.gov (United States)

    Mummolo, Giovanni

    2007-01-01

    EU graduation and the recruitment of industrial engineers (IEs) have been investigated. An increasing demand is observed for graduates in almost all industrial engineering (IE) subjects. The labour market in the EU is evolving towards the service sector even if manufacturing still represents a significant share of both IE employment and gross…

  16. Research and Practice of Active Learning in Engineering Education

    NARCIS (Netherlands)

    Graaf, de Erik; Saunders-Smits, Gillian; Nieweg, Michael

    2005-01-01

    Since 2001, the international network Active Learning in Engineering education (ALE) organized a series of international workshops on innovation of engineering education. The papers in this book are selected to reflect the state of the art, based on contributions to the 2005 ALE workshop in Holland.

  17. Research on the Undergraduate Financial Engineering Education in China

    Science.gov (United States)

    Ma, Haiyong; Zhang, Weiwei

    2011-01-01

    The rapid development of modern economy has put forward higher requirements for financial engineering education. This paper analyzes the status and problems in undergraduate financial engineering education in china, such as indistinct training objective, rigid curriculum structure, and superficial teaching methods, etc. and puts forward…

  18. Study on engineering technologies in the Mizunami Underground Research Laboratory. FY 2009-2010 (Contract research)

    International Nuclear Information System (INIS)

    Ijiri, Yuji; Noda, Masaru; Nobuto, Jun; Matsui, Hiroya; Mikake, Shinichiro; Hashizume, Shigeru

    2014-03-01

    As Mizunami Underground Research Laboratory project, research on engineering technology at a deep underground has been carried out in order to establish the technological basis. The research is mainly aimed in four categories: “Development of design and construction planning technology”, “Development of construction technology”, “Development of countermeasure technology” and “Development of technology for security”. In the Construction Phase (Phase 2) of the MIU plan, these four categorized researches on engineering technology were examed based on the data obtained during construction. Following are the details of the research activities performed in each category. Regarding “Development of design and construction planning technology”, design validation using the data obtained during the excavation down through granite to GL-460m, evaluation of the pilot borehole investigation conducted at the Main and Ventilation shafts and the pilot borehole investigation plan below GL-500m, validity assessment of the risk management method using its prototype focused on the large scale underground development project, and social risk measurement and management of the MIU using case study were performed. As for “Development of construction technology”, as quality control management, evaluation of the technique applied for the execution management and examination focused on the liner concrete, also estimation of the short step method adopted for the shaft excavation based on the actual construction cycle time were conducted, and then excavation schedule down to GL-1000m was predicted based on the actual excavation progress. As for “Development of countermeasure technology”, countermeasure method adopted for groundwater inflow around GL-400m in the Ventilation shaft was evaluated and grouting plan below GL-500m was presented. And for “Development of technology for security”, from the point of view of long term maintenance including the safety

  19. Compilation of contract research for the Chemical Engineering Branch, Division of Engineering Technology. Annual report for FY 1985

    International Nuclear Information System (INIS)

    1986-07-01

    This compilation of annual research reports by the contractors to the Chemical Engineering Branch, DET, is published to disseminate information from ongoing programs and covers research conducted during fiscal year 1985. The programs covered in this document include research on: (1) engineered safety feature (ESF) system effectiveness in terms of fission product retention under severe accident conditions; (2) effectiveness and safety aspects of selected decontamination methods; (3) decontamination impacts on solidification and waste disposal; (4) evaluation of nuclear facility decommissioning projects and concepts, and (5) operational schemes to prevent or mitigate the effects of hydrogen combustion during LWR accidents

  20. Software Engineering Research/Developer Collaborations (C104)

    Science.gov (United States)

    Shell, Elaine; Shull, Forrest

    2005-01-01

    The goal of this collaboration was to produce Flight Software Branch (FSB) process standards for software inspections which could be used across three new missions within the FSB. The standard was developed by Dr. Forrest Shull (Fraunhofer Center for Experimental Software Engineering, Maryland) using the Perspective-Based Inspection approach, (PBI research has been funded by SARP) , then tested on a pilot Branch project. Because the short time scale of the collaboration ruled out a quantitative evaluation, it would be decided whether the standard was suitable for roll-out to other Branch projects based on a qualitative measure: whether the standard received high ratings from Branch personnel as to usability and overall satisfaction. The project used for piloting the Perspective-Based Inspection approach was a multi-mission framework designed for reuse. This was a good choice because key representatives from the three new missions would be involved in the inspections. The perspective-based approach was applied to produce inspection procedures tailored for the specific quality needs of the branch. The technical information to do so was largely drawn through a series of interviews with Branch personnel. The framework team used the procedures to review requirements. The inspections were useful for indicating that a restructuring of the requirements document was needed, which led to changes in the development project plan. The standard was sent out to other Branch personnel for review. Branch personnel were very positive. However, important changes were identified because the perspective of Attitude Control System (ACS) developers had not been adequately represented, a result of the specific personnel interviewed. The net result is that with some further work to incorporate the ACS perspective, and in synchrony with the roll out of independent Branch standards, the PBI approach will be implemented in the FSB. Also, the project intends to continue its collaboration with

  1. Integrated tokamak modeling: when physics informs engineering and research planning

    Science.gov (United States)

    Poli, Francesca

    2017-10-01

    Simulations that integrate virtually all the relevant engineering and physics aspects of a real tokamak experiment are a power tool for experimental interpretation, model validation and planning for both present and future devices. This tutorial will guide through the building blocks of an ``integrated'' tokamak simulation, such as magnetic flux diffusion, thermal, momentum and particle transport, external heating and current drive sources, wall particle sources and sinks. Emphasis is given to the connection and interplay between external actuators and plasma response, between the slow time scales of the current diffusion and the fast time scales of transport, and how reduced and high-fidelity models can contribute to simulate a whole device. To illustrate the potential and limitations of integrated tokamak modeling for discharge prediction, a helium plasma scenario for the ITER pre-nuclear phase is taken as an example. This scenario presents challenges because it requires core-edge integration and advanced models for interaction between waves and fast-ions, which are subject to a limited experimental database for validation and guidance. Starting from a scenario obtained by re-scaling parameters from the demonstration inductive ``ITER baseline'', it is shown how self-consistent simulations that encompass both core and edge plasma regions, as well as high-fidelity heating and current drive source models are needed to set constraints on the density, magnetic field and heating scheme. This tutorial aims at demonstrating how integrated modeling, when used with adequate level of criticism, can not only support design of operational scenarios, but also help to asses the limitations and gaps in the available models, thus indicating where improved modeling tools are required and how present experiments can help their validation and inform research planning. Work supported by DOE under DE-AC02-09CH1146.

  2. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of complex biosystem analyzing technology; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The aim is to utilize the sophisticated functions of complex biosystems. In the research and development of technologies for effectively utilizing unexploited resources and substances such as seeweeds and algae, seaweeds are added to seawater to turn into a microbial suspension after the passage of two weeks, the suspension is next scattered on a carageenan culture medium, and then carageenan decomposing microbes are obtained. In the research and development of technologies for utilizing microbe/fauna-flora complex systems, technologies for exploring and analyzing microbes are studied. For this purpose, 48 kinds of sponges and 300 kinds of bacteria symbiotic with the sponges are sampled in Malaysia. Out of them, 15 exhibit enzyme inhibition and Artemia salina lethality activities. In the development of technologies for analyzing the functions of microbes engaged in the production of useful resources and substances for animals and plants, 150 kinds of micro-algae are subjected to screening using protease and chitinase inhibiting activities as the indexes, and it is found that an extract of Isochrysis galbana displays an intense inhibitory activity. The alga is cultured in quantities, the active component is isolated from 20g of dried alga, and its constitution is determined. (NEDO)

  3. Protein sequence analysis using Hewlett-Packard biphasic sequencing cartridges in an applied biosystems 473A protein sequencer.

    Science.gov (United States)

    Tang, S; Mozdzanowski, J; Anumula, K R

    1999-01-01

    Protein sequence analysis using an adsorptive biphasic sequencing cartridge, a set of two coupled columns introduced by Hewlett-Packard for protein sequencing by Edman degradation, in an Applied Biosystems 473A protein sequencer has been demonstrated. Samples containing salts, detergents, excipients, etc. (e.g., formulated protein drugs) can be easily analyzed using the ABI sequencer. Simple modifications to the ABI sequencer to accommodate the cartridge extend its utility in the analysis of difficult samples. The ABI sequencer solvents and reagents were compatible with the HP cartridge for sequencing. Sequence information up to ten residues can be easily generated by this nonoptimized procedure, and it is sufficient for identifying proteins by database search and for preparing a DNA probe for cloning novel proteins.

  4. Reforestation of tropical forest. ; Restoration of mangrove forest biosystem. Nettairin no saisei. ; Mangrove rin no seitaikei shufuku

    Energy Technology Data Exchange (ETDEWEB)

    Komiyama, A. (Gifu Univ., Gifu (Japan). Faculty of Aguriculture)

    1992-10-01

    Mangrove is the general term for more than 50 kinds of trees if limited to representative kinds only. Those tree groups form frameworks of the biosystem, creating various dwellings inside for various kinds of biota. Mangrove forests can be considered as an interacting system to work closely with water and plants. A type of industrial use of mangrove forests is harvesting of pulp wood, but the largest scale type of application is charcoal making. 90% of mangrove wood is used for charcoal making in Thailand for domestic use as well as for exporting. Charcoal making is considered to be an important industry for acquiring cash. The amount of mangrove wood used at charcoal making plants is estimated from 37 to 78 thousand m[sup 3] per year. The planned deforestation is undoubtedly excessive. If such a state of usage should continue for a long time, mangrove forests will be exhausted and will be disappeared. 14 refs., 2 figs., 1 tab.

  5. Engineering Cardiac Muscle Tissue: A Maturating Field of Research.

    Science.gov (United States)

    Weinberger, Florian; Mannhardt, Ingra; Eschenhagen, Thomas

    2017-04-28

    Twenty years after the initial description of a tissue engineered construct, 3-dimensional human cardiac tissues of different kinds are now generated routinely in many laboratories. Advances in stem cell biology and engineering allow for the generation of constructs that come close to recapitulating the complex structure of heart muscle and might, therefore, be amenable to industrial (eg, drug screening) and clinical (eg, cardiac repair) applications. Whether the more physiological structure of 3-dimensional constructs provides a relevant advantage over standard 2-dimensional cell culture has yet to be shown in head-to-head-comparisons. The present article gives an overview on current strategies of cardiac tissue engineering with a focus on different hydrogel methods and discusses perspectives and challenges for necessary steps toward the real-life application of cardiac tissue engineering for disease modeling, drug development, and cardiac repair. © 2017 American Heart Association, Inc.

  6. NASA Systems Engineering Research Consortium: Defining the Path to Elegance in Systems

    Science.gov (United States)

    Watson, Michael D.; Farrington, Phillip A.

    2016-01-01

    The NASA Systems Engineering Research Consortium was formed at the end of 2010 to study the approaches to producing elegant systems on a consistent basis. This has been a transformative study looking at the engineering and organizational basis of systems engineering. The consortium has engaged in a variety of research topics to determine the path to elegant systems. In the second year of the consortium, a systems engineering framework emerged which structured the approach to systems engineering and guided our research. This led in the third year to set of systems engineering postulates that the consortium is continuing to refine. The consortium has conducted several research projects that have contributed significantly to the understanding of systems engineering. The consortium has surveyed the application of the NASA 17 systems engineering processes, explored the physics and statistics of systems integration, and considered organizational aspects of systems engineering discipline integration. The systems integration methods have included system energy analysis, Akaike Information Criteria (AIC), State Variable Analysis, Multidisciplinary Coupling Analysis (MCA), Multidisciplinary Design Optimization (MDO), System Cost Modeling, System Robustness, and Value Modeling. Organizational studies have included the variability of processes in change evaluations, margin management within the organization, information theory of board structures, social categorization of unintended consequences, and initial looks at applying cognitive science to systems engineering. Consortium members have also studied the bidirectional influence of policy and law with systems engineering.

  7. Polar Seismic TETwalker: Integrating Engineering Teaching and Research

    Science.gov (United States)

    Gifford, C. M.; Ruiz, I.; Carmichael, B. L.; Wade, U. B.; Agah, A.

    2007-12-01

    .g., broadband seismometer) and other structures of the node-and-strut TETwalker robot architecture. It is planned to take the design models and construct a physical prototype for future testing in Greenland and Antarctica. This work involved three undergraduate students from underrepresented groups as part of the CReSIS Summer REU program, aimed at involving these groups in science and engineering research.

  8. Engineered nanomaterials: toward effective safety management in research laboratories.

    Science.gov (United States)

    Groso, Amela; Petri-Fink, Alke; Rothen-Rutishauser, Barbara; Hofmann, Heinrich; Meyer, Thierry

    2016-03-15

    It is still unknown which types of nanomaterials and associated doses represent an actual danger to humans and environment. Meanwhile, there is consensus on applying the precautionary principle to these novel materials until more information is available. To deal with the rapid evolution of research, including the fast turnover of collaborators, a user-friendly and easy-to-apply risk assessment tool offering adequate preventive and protective measures has to be provided. Based on new information concerning the hazards of engineered nanomaterials, we improved a previously developed risk assessment tool by following a simple scheme to gain in efficiency. In the first step, using a logical decision tree, one of the three hazard levels, from H1 to H3, is assigned to the nanomaterial. Using a combination of decision trees and matrices, the second step links the hazard with the emission and exposure potential to assign one of the three nanorisk levels (Nano 3 highest risk; Nano 1 lowest risk) to the activity. These operations are repeated at each process step, leading to the laboratory classification. The third step provides detailed preventive and protective measures for the determined level of nanorisk. We developed an adapted simple and intuitive method for nanomaterial risk management in research laboratories. It allows classifying the nanoactivities into three levels, additionally proposing concrete preventive and protective measures and associated actions. This method is a valuable tool for all the participants in nanomaterial safety. The users experience an essential learning opportunity and increase their safety awareness. Laboratory managers have a reliable tool to obtain an overview of the operations involving nanomaterials in their laboratories; this is essential, as they are responsible for the employee safety, but are sometimes unaware of the works performed. Bringing this risk to a three-band scale (like other types of risks such as biological, radiation

  9. Paper in architecture: Research by design, engineering and prototyping

    Directory of Open Access Journals (Sweden)

    Jerzy F. Latka

    2017-11-01

    in terms of architecture, its material properties were researched on a micro, meso and macro level. This research of the possible applications of paper in architecture was informed by two main research questions: What is paper and to what extent can it be used in architecture? What is the most suitable way to use paper in emergency architecture? To answer the first research question, fundamental and material research on paper and paper products had to be conducted. The composition of the material, production methods and properties of paper were researched. Then paper products with the potential to be used in architecture were examined. The history of the development of paper and its influence on civilisation helped the author gain a better understanding of the nature of this material, which we encounter in our lives every day. Research on objects for everyday use, furniture, pavilions and architecture realised in the last 150 years allowed the author to distinguish various types of paper design and paper architecture. Analysis of realised buildings in which paper products were used as structural elements and parts of the building envelope resulted in a wide array of possible solutions. Structural systems, types of connections between the various elements, impregnation methods and the functionalities and lifespan of different types of buildings were systematised. The knowledge thus collected allowed the author to conduct a further exploration of paper architecture in the form of designs and prototypes. To answer the second research question, the analysed case studies were translated into designs and prototypes of emergency shelters. During the research-by-design, engineering and prototyping phases, more than a dozen prototypes were built. The prototypes differed in terms of structural systems, used materials, connections between structural elements, impregnation methods, functionality and types of building. The three versions of the Transportable Emergency Cardboard

  10. 34 CFR 350.33 - What cooperation requirements must a Rehabilitation Engineering Research Center meet?

    Science.gov (United States)

    2010-07-01

    ... Engineering Research Centers Does the Secretary Assist? § 350.33 What cooperation requirements must a... 34 Education 2 2010-07-01 2010-07-01 false What cooperation requirements must a Rehabilitation Engineering Research Center meet? 350.33 Section 350.33 Education Regulations of the Offices of the Department...

  11. The Contribution of Qualitative Research Towards the Issues Affecting Female Undergraduate Engineering Students

    Science.gov (United States)

    Duggan, Louise Maria

    2015-01-01

    This article explores the use of qualitative research methods towards our understanding of the issues affecting female undergraduate engineers. As outlined in this article female engineering students face many challenges during their undergraduate studies. Qualitative research methods provide an opportunity to gain a deeper understanding of the…

  12. [Research progress of genetic engineering on medicinal plants].

    Science.gov (United States)

    Teng, Zhong-qiu; Shen, Ye

    2015-02-01

    The application of genetic engineering technology in modern agriculture shows its outstanding role in dealing with food shortage. Traditional medicinal plant cultivation and collection have also faced with challenges, such as lack of resources, deterioration of environment, germplasm of recession and a series of problems. Genetic engineering can be used to improve the disease resistance, insect resistance, herbicides resistant ability of medicinal plant, also can improve the medicinal plant yield and increase the content of active substances in medicinal plants. Thus, the potent biotechnology can play an important role in protection and large area planting of medicinal plants. In the development of medicinal plant genetic engineering, the safety of transgenic medicinal plants should also be paid attention to. A set of scientific safety evaluation and judgment standard which is suitable for transgenic medicinal plants should be established based on the recognition of the particularity of medicinal plants.

  13. An Engineering Approach to Management of Occupational and Community Noise Exposure at NASA Lewis Research Center

    Science.gov (United States)

    Cooper, Beth A.

    1997-01-01

    Workplace and environmental noise issues at NASA Lewis Research Center are effectively managed via a three-part program that addresses hearing conservation, community noise control, and noise control engineering. The Lewis Research Center Noise Exposure Management Program seeks to limit employee noise exposure and maintain community acceptance for critical research while actively pursuing engineered controls for noise generated by more than 100 separate research facilities and the associated services required for their operation.

  14. Software Engineering Research/Developer Collaborations in 2005

    Science.gov (United States)

    Pressburger, Tom

    2006-01-01

    In CY 2005, three collaborations between software engineering technology providers and NASA software development personnel deployed three software engineering technologies on NASA development projects (a different technology on each project). The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report. Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Also included is an acronym list.

  15. Biomedical engineering - A means to add new dimension to medicine and research

    Science.gov (United States)

    Doerr, D. F.

    1992-01-01

    Biomedical engineering is an evolving science that seeks to insert technically oriented and trained personnel to assist medical professionals in solving technological problems in the pursuit of innovations in the delivery of health care. Consequently, engineering solutions are brought to bear on problems that previously were outside the training of physicians and beyond the understanding or appreciation of the conventionally educated electrical or mechanical engineers. This physician/scientist/engineer team has a capability to extend medicine and research far beyond the capability of a single entity operating alone. How biomedical engineering has added a new dimension to medical science at the Kennedy Space Center is described.

  16. Validation of the Applied Biosystems 7500 Fast Instrument for Detection of Listeria Species with the SureTect Listeria Species PCR Assay.

    Science.gov (United States)

    Cloke, Jonathan; Arizanova, Julia; Crabtree, David; Simpson, Helen; Evans, Katharine; Vaahtoranta, Laura; Palomäki, Jukka-Pekka; Artimo, Paulus; Huang, Feng; Liikanen, Maria; Koskela, Suvi; Chen, Yi

    2016-01-01

    The Thermo Scientific™ SureTect™ Listeria species Real-Time PCR Assay was certified during 2013 by the AOAC Research Institute (RI) Performance Tested Methods(SM) program as a rapid method for the detection of Listeria species from a wide range of food matrixes and surface samples. A method modification study was conducted in 2015 to extend the matrix claims of the product to a wider range of food matrixes. This report details the method modification study undertaken to extend the use of this PCR kit to the Applied Biosystems™ 7500 Fast PCR Instrument and Applied Biosystems RapidFinder™ Express 2.0 software allowing use of the assay on a 96-well format PCR cycler in addition to the current workflow, using the 24-well Thermo Scientific PikoReal™ PCR Instrument and Thermo Scientific SureTect software. The method modification study presented in this report was assessed by the AOAC-RI as being a level 2 method modification study, necessitating a method developer study on a representative range of food matrixes covering raw ground turkey, 2% fat pasteurized milk, and bagged lettuce as well as stainless steel surface samples. All testing was conducted in comparison to the reference method detailed in International Organization for Standardization (ISO) 6579:2002. No significant difference by probability of detection statistical analysis was found between the SureTect Listeria species PCR Assay or the ISO reference method methods for any of the three food matrixes and the surface samples analyzed during the study.

  17. Acoustic emission testing: basics for research, applications in civil engineering

    National Research Council Canada - National Science Library

    Grosse, Christian U; Ohtsu, Masayasu

    2008-01-01

    ... methods observing a materials surface. There are many reports on successful AE applications in engineering at a broad variety of materials, material compositions and structures. Applications to many different materials are addressed in this book, but the success of these applications does not necessarily mean that the AET is easy to be applied....

  18. Solar Climate Engineering and Intellectual Property : Toward a Research Commons

    NARCIS (Netherlands)

    Reynolds, Jesse; Contreras, Jorge L; Sarnoff, Joshua D

    2017-01-01

    Climate change is one of the greatest challenges confronting society today. Solar climate engineering (SCE) has the potential to reduce climate risks substantially. This controversial technology would make the earth more reflective in order to counteract global warming. The science of SCE is still

  19. Summary of Research 2000: Department of Electrical and Computer Engineering

    Science.gov (United States)

    2001-12-01

    Luiz Alberto Lisoba da Silva Cardoso-Lieutenant Commander, Brazilian Navy B.S.E.E., Military Institute of Engineering, 1985 M.S.E.E., Catholic...CONSTRAINTS Marcio Moreira da Silva-Lieutenant Commander, Brazilian Navy B.S., Escola Naval, 1985 B.S.E.E., Universidade de Slo Paulo, December 1991 M.S.E.E

  20. Climate engineering research : A precautionary response to climate change?

    NARCIS (Netherlands)

    Reynolds, J.L.; Fleurke, F.M.

    2013-01-01

    In the face of dire forecasts for anthropogenic climate change, climate engineering is increasingly discussed as a possible additional set of responses to reduce climate change’s threat. These proposals have been controversial, in part because they – like climate change itself – pose uncertain risks

  1. Biomedical Engineering: A Compendium of Research Training Programs.

    Science.gov (United States)

    National Inst. of General Medical Sciences (NIH), Bethesda, MD.

    This document was prepared to provide a comprehensive view of the programs in biomedical engineering in existence in 1969. These programs are supported by the National Institute of General Medical Sciences and are located at 18 universities. This compendium provides information as to the intent and content of these programs from data provided by…

  2. Abstracts of the 10th Conference of the Italian Society of Agricultural Engineering

    Directory of Open Access Journals (Sweden)

    Danilo Monarca

    2013-09-01

    Full Text Available it is my pleasure to welcome you to the 10th AIIA Conference: “AIIA13 – Horizons in agricultural, forestry and biosystems engineering”, and to welcome you to Viterbo. For the first time the AIIA conference will be held in English. The purpose of this choice is to involve academics and researchers coming from other nations. This conference will then be a unique opportunity for scientists, researchers, experts, students and people representing the business world to show, share and discuss the results of their researches. Another goal of this conference is the promotion of the cooperation and networking in the field of Biosystems Engineering, also trying to include the business world in it. By doing that, we will be able to take on the new challenge of Horizon 2020, the new European Framework Programme. This programme attributes a capital and fundamental role to research and innovation, seen as important means to guarantee an intelligent, sustainable and comprehensive growth to Europe. Horizon 2020 is articulated on 3 strategic objectives 1 Excellent science, intended to secure Europe’s leadership in science worldwide. 2 Industrial Leadership , aimed at supporting research and innovation of European industry, with a strong focus on industrial technologies and investments for SMEs, 3 Societal challenges , aimed at tackling major global challenges in the following areas: health, demographic change and wellbeing, food security, sustainable agriculture, secure, clean and efficient energy, smart, green and integrated transport, climate action, resource efficiency and raw materials, inclusive, innovative and secure societies. In all these fields Agricultural, Forestry and Biosystems Engineering in the coming years will have a major role. I conclude by saying that AIIA13 is also an opportunity to know the Tuscia, a still intact territory, in which culture and respect for the land, innovation and tradition come together in a truly original model of

  3. Conflict Management in Collaborative Engineering Design: Basic Research in Fundamental Theory, Modeling Framework, and Computer Support for Collaborative Engineering Activities

    Science.gov (United States)

    2002-01-01

    was done by The IMPACT Research Laboratory, School of Engineering, Univer- sity of Southern California (USC) under Contract No. DACA -88-96-D-0003...knowledge-bases are involved, and group design becomes a necessity since no one individual has the knowledge (and often, even the awareness), and/or

  4. Visually Augmented Analysis of Socio-Technical Networks in Engineering Systems Design Research

    DEFF Research Database (Denmark)

    Storga, M.; Stankovic, T.; Cash, Philip

    2013-01-01

    /service-system (PSS) life cycle) may be applied in engineering design research. Network thinking of the kind described in this paper could be fundamental for developing new and effective techniques for solving the problems in the engineering design research related to the interpretation of the huge amount of data...... captured during experiments and observations that are more and more used as a main research method. Case studies that are presented illustrate also the significance of the network based research approach in providing insight into ways of improving the design process for complex engineering systems......., but only fairly recently has the study of networks in general become a major topic of research in complex engineering systems. The research reported in this paper is discussing how the visually augmented analysis of complex socio-networks (networks of people and technology engaged in a product...

  5. Ice Crystal Icing Engine Testing in the NASA Glenn Research Center's Propulsion Systems Laboratory: Altitude Investigation

    Science.gov (United States)

    Oliver, Michael J.

    2014-01-01

    The National Aeronautics and Space Administration (NASA) conducted a full scale ice crystal icing turbofan engine test using an obsolete Allied Signal ALF502-R5 engine in the Propulsion Systems Laboratory (PSL) at NASA Glenn Research Center. The test article used was the exact engine that experienced a loss of power event after the ingestion of ice crystals while operating at high altitude during a 1997 Honeywell flight test campaign investigating the turbofan engine ice crystal icing phenomena. The test plan included test points conducted at the known flight test campaign field event pressure altitude and at various pressure altitudes ranging from low to high throughout the engine operating envelope. The test article experienced a loss of power event at each of the altitudes tested. For each pressure altitude test point conducted the ambient static temperature was predicted using a NASA engine icing risk computer model for the given ambient static pressure while maintaining the engine speed.

  6. Software Engineering Research/Developer Collaborations in 2004 (C104)

    Science.gov (United States)

    Pressburger, Tom; Markosian, Lawrance

    2005-01-01

    In 2004, six collaborations between software engineering technology providers and NASA software development personnel deployed a total of five software engineering technologies (for references, see Section 7.2) on the NASA projects. The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report (for references, see Section 7.1). Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Section 6 lists the acronyms used in this report.

  7. Research perspectives in hydraulics and water resources engineering

    National Research Council Canada - National Science Library

    Rama Prasad, Indian Institute of Science, Bangalore; Vedula, S

    2002-01-01

    ... were taken up. The Section grew into a full fledged department, which was rechristened as the Department of Civil Engineering in 1972. In recognition of the excellence in its performance, the Department has been designated as a Centre for Advanced Studies by the University Grants Commission. The Department celebrated the Golden Jubilee during the year July 2000-July 2001 with a variety of academic activities including special lectures, workshops and an international conference. As part of the cele...

  8. CRISPR Genome Engineering for Human Pluripotent Stem Cell Research.

    Science.gov (United States)

    Chaterji, Somali; Ahn, Eun Hyun; Kim, Deok-Ho

    2017-01-01

    The emergence of targeted and efficient genome editing technologies, such as repurposed bacterial programmable nucleases (e.g., CRISPR-Cas systems), has abetted the development of cell engineering approaches. Lessons learned from the development of RNA-interference (RNA-i) therapies can spur the translation of genome editing, such as those enabling the translation of human pluripotent stem cell engineering. In this review, we discuss the opportunities and the challenges of repurposing bacterial nucleases for genome editing, while appreciating their roles, primarily at the epigenomic granularity. First, we discuss the evolution of high-precision, genome editing technologies, highlighting CRISPR-Cas9. They exist in the form of programmable nucleases, engineered with sequence-specific localizing domains, and with the ability to revolutionize human stem cell technologies through precision targeting with greater on-target activities. Next, we highlight the major challenges that need to be met prior to bench-to-bedside translation, often learning from the path-to-clinic of complementary technologies, such as RNA-i. Finally, we suggest potential bioinformatics developments and CRISPR delivery vehicles that can be deployed to circumvent some of the challenges confronting genome editing technologies en route to the clinic.

  9. FY2015 Annual Report for Alternative Fuels DISI Engine Research.

    Energy Technology Data Exchange (ETDEWEB)

    Sjöberg, Carl-Magnus G. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2016-01-01

    Climate change and the need to secure energy supplies are two reasons for a growing interest in engine efficiency and alternative fuels. This project contributes to the science-base needed by industry to develop highly efficient DISI engines that also beneficially exploit the different properties of alternative fuels. Our emphasis is on lean operation, which can provide higher efficiencies than traditional non-dilute stoichiometric operation. Since lean operation can lead to issues with ignition stability, slow flame propagation and low combustion efficiency, we focus on techniques that can overcome these challenges. Specifically, fuel stratification is used to ensure ignition and completeness of combustion but has soot- and NOx- emissions challenges. For ultralean well-mixed operation, turbulent deflagration can be combined with controlled end-gas auto-ignition to render mixed-mode combustion that facilitates high combustion efficiency. However, the response of both combustion and exhaust emissions to these techniques depends on the fuel properties. Therefore, to achieve optimal fuel-economy gains, the engine combustion-control strategies must be adapted to the fuel being utilized.

  10. The role of genetically-engineered pigs in xenotransplantation research

    Science.gov (United States)

    Cooper, David K.C.; Ekser, Burcin; Ramsoondar, Jagdeece; Phelps, Carol; Ayares, David

    2015-01-01

    There is a critical shortage in the number of deceased human organs that become available for purposes of clinical transplantation. This problem might be resolved by the transplantation or organs from pigs genetically-engineered to protect them from the human immune response. The pathobiological barriers to successful pig organ transplantation in primates include activation of the innate and adaptive immune systems, coagulation dysregulation, and inflammation. Genetic engineering of the pig as an organ source has increased the survival of the transplanted pig heart, kidney, islet and corneal graft in nonhuman primates (NHP) from minutes to months or occasionally years. Genetic engineering may also contribute to any physiological barriers that might be identified as well as to reducing the risks of transfer of a potentially infectious micro-organism with the organ. There are now an estimated 40 or more genetic alterations that have been carried out in pigs, with some pigs expressing 5 or 6 manipulations. With the new technology now available, it will become increasingly common for a pig to express even more genetic manipulations, and these could be tested in the pig-to-NHP models to assess their efficacy and benefit. It is therefore likely that clinical trials of pig kidney, heart, and islet transplantation will become feasible in the near future. PMID:26365762

  11. Research report 1987-1989: Environmental Quality Laboratory and Environmental Engineering Science, W. M. Keck Laboratories

    OpenAIRE

    Brooks, Norman H.

    1990-01-01

    This research biennial report for 1987-89 covers the activities of both the Environmental Engineering Science program and the Environmental Quality Laboratory for the period October 1987-November 1989. Environmental Engineering Science is the degree-granting academic program housed in the Keck Laboratories, with associated research projects. The Environmental Quality Laboratory is a research center focusing on large scale problems of environmental quality and natural resources. All the facult...

  12. Impact of Commercial Search Engines and International Databases on Engineering Teaching and Research

    Science.gov (United States)

    Chanson, Hubert

    2007-01-01

    For the last three decades, the engineering higher education and professional environments have been completely transformed by the "electronic/digital information revolution" that has included the introduction of personal computer, the development of email and world wide web, and broadband Internet connections at home. Herein the writer compares…

  13. THE MODEL OF FORMATION OF RESEARCH COMPETENCE OF FUTURE SOFTWARE ENGINEERS

    Directory of Open Access Journals (Sweden)

    N. Osipova

    2014-06-01

    Full Text Available The article analyzes the practical experience, theoretical and methodological backgrounds toformation of research competence of future software engineers. Also in this article we defined the content, structure, criteria and indicators of research competence of future software engineers and characterized levels of the formedness of research competence of futuresoftware engineers and explained main phases of its formation. In consideration of the specificity of formation of research competence of software engineers, job market requirements and social order much attention in article is paid to student participation in research projects of the Chair, particularly in international projects and projects commissioned by the Ministry of Education and Science of Ukraine. The important factor of effective formation of research competence of future software engineers is student's work on chair of scientific schools, their training in IT companies and IT departments of higher education institutions and other educational establishments, including abroad. Also we pay attention to the need of group work of participants of the educational process that can beprovided with their participation in scientific problem groups, scientific schools, work on joint research projects. The conducted research confirms the effectiveness of implementation of the proposed model offormation of research competence of future software engineers.

  14. Learning to become graduate students: Japanese women's experience in the research unit in engineering

    Science.gov (United States)

    Hosaka, Masako

    2010-12-01

    Based on the analysis of 16 interviews with women first-year master's students at two national engineering schools in Japan, this article examines the socialisation role of compulsory undergraduate research experience in Japanese women's decisions to pursue graduate education and choices of the programme. The findings suggest that research experiences in a small independent research unit within the major department convinced Japanese women engineering students of their academic and social success as graduate students in the current environment. Although participants generally adapted themselves to the research unit through their research, there is a variation in the degree to which they were smoothly integrated into the research unit, reflecting organisational and individual differences.

  15. General aviation internal-combustion engine research programs at NASA-Lewis Research Center

    Science.gov (United States)

    Willis, E. A.

    1978-01-01

    An update is presented of non-turbine general aviation engine programs. The program encompasses conventional, lightweight diesel and rotary engines. It's three major thrusts are: (1) reduced SFC's; (2) improved fuels tolerance; and (3) reduced emissions. Current and planned future programs in such areas as lean operation, improved fuel management, advanced cooling techniques and advanced engine concepts, are described. These are expected to lay the technology base, by the mid to latter 1980's, for engines whose life cycle fuel costs are 30 to 50% lower than today's conventional engines.

  16. Ab initio O(N) elongation-counterpoise method for BSSE-corrected interaction energy analyses in biosystems

    Energy Technology Data Exchange (ETDEWEB)

    Orimoto, Yuuichi; Xie, Peng; Liu, Kai [Department of Material Sciences, Faculty of Engineering Sciences, Kyushu University, 6-1 Kasuga-Park, Fukuoka 816-8580 (Japan); Yamamoto, Ryohei [Department of Molecular and Material Sciences, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 6-1 Kasuga-Park, Fukuoka 816-8580 (Japan); Imamura, Akira [Hiroshima Kokusai Gakuin University, 6-20-1 Nakano, Aki-ku, Hiroshima 739-0321 (Japan); Aoki, Yuriko, E-mail: aoki.yuriko.397@m.kyushu-u.ac.jp [Department of Material Sciences, Faculty of Engineering Sciences, Kyushu University, 6-1 Kasuga-Park, Fukuoka 816-8580 (Japan); Japan Science and Technology Agency, CREST, 4-1-8 Hon-chou, Kawaguchi, Saitama 332-0012 (Japan)

    2015-03-14

    An Elongation-counterpoise (ELG-CP) method was developed for performing accurate and efficient interaction energy analysis and correcting the basis set superposition error (BSSE) in biosystems. The method was achieved by combining our developed ab initio O(N) elongation method with the conventional counterpoise method proposed for solving the BSSE problem. As a test, the ELG-CP method was applied to the analysis of the DNAs’ inter-strands interaction energies with respect to the alkylation-induced base pair mismatch phenomenon that causes a transition from G⋯C to A⋯T. It was found that the ELG-CP method showed high efficiency (nearly linear-scaling) and high accuracy with a negligibly small energy error in the total energy calculations (in the order of 10{sup −7}–10{sup −8} hartree/atom) as compared with the conventional method during the counterpoise treatment. Furthermore, the magnitude of the BSSE was found to be ca. −290 kcal/mol for the calculation of a DNA model with 21 base pairs. This emphasizes the importance of BSSE correction when a limited size basis set is used to study the DNA models and compare small energy differences between them. In this work, we quantitatively estimated the inter-strands interaction energy for each possible step in the transition process from G⋯C to A⋯T by the ELG-CP method. It was found that the base pair replacement in the process only affects the interaction energy for a limited area around the mismatch position with a few adjacent base pairs. From the interaction energy point of view, our results showed that a base pair sliding mechanism possibly occurs after the alkylation of guanine to gain the maximum possible number of hydrogen bonds between the bases. In addition, the steps leading to the A⋯T replacement accompanied with replications were found to be unfavorable processes corresponding to ca. 10 kcal/mol loss in stabilization energy. The present study indicated that the ELG-CP method is promising for

  17. Building Infrastructure for Preservation and Publication of Earthquake Engineering Research Data

    Directory of Open Access Journals (Sweden)

    Stanislav Pejša

    2014-10-01

    Full Text Available The objective of this paper is to showcase the progress of the earthquake engineering community during a decade-long effort supported by the National Science Foundation in the George E. Brown Jr., Network for Earthquake Engineering Simulation (NEES. During the four years that NEES network operations have been headquartered at Purdue University, the NEEScomm management team has facilitated an unprecedented cultural change in the ways research is performed in earthquake engineering. NEES has not only played a major role in advancing the cyberinfrastructure required for transformative engineering research, but NEES research outcomes are making an impact by contributing to safer structures throughout the USA and abroad. This paper reflects on some of the developments and initiatives that helped instil change in the ways that the earthquake engineering and tsunami community share and reuse data and collaborate in general.

  18. Tissue engineering research in developing countries, the significant and differences as compared to the developed countries.

    Science.gov (United States)

    Aminuddin, B S; Ruszymah, B H I

    2008-07-01

    The emergence of tissue engineering and stem cell research has created a tremendous response amongst scientist in Malaysia. However, despite the enthusiastic to embark on the research we have to carefully divert the research towards our needs. This is due to our responsibility to address the mounting problem of communicable diseases here and a very limited funding. As commercialization is a key objective the combination of products towards treating or diagnosing communicable and non-communicable diseases in the developing country is another important factor. The discussion here is mainly on the evolution of tissue engineering in Malaysia and taking a model of tissue engineering in otolaryngology.

  19. Three dimensions of learning: experiential activity for engineering innovation education and research

    Science.gov (United States)

    Killen, Catherine P.

    2015-09-01

    This paper outlines a novel approach to engineering education research that provides three dimensions of learning through an experiential class activity. A simulated decision activity brought current research into the classroom, explored the effect of experiential activity on learning outcomes and contributed to the research on innovation decision making. The 'decision task' was undertaken by more than 480 engineering students. It increased their reported measures of learning and retention by an average of 0.66 on a five-point Likert scale, and revealed positive correlations between attention, enjoyment, ongoing interest and learning and retention. The study also contributed to innovation management research by revealing the influence of different data visualisation methods on decision quality, providing an example of research-integrated education that forms part of the research process. Such a dovetailing of different research studies demonstrates how engineering educators can enhance educational impact while multiplying the outcomes from their research efforts.

  20. Research on Five Stakeholders & Five Relationships of Higher Engineering Education in China

    OpenAIRE

    Guangshe Jia; Chengbin Xiao

    2009-01-01

    With the development of globalization, higher engineering education has been on the rise which includes five Stakeholders and five relationships. This paper will discuss five relations of higher engineering education: teaching, research and social services, professional education and humanity education, ability education and knowledge education, theoretical teaching and practical teaching, development of education and development of national and regional economy. Among them, teaching, researc...

  1. The Use of Motivation Theory in Engineering Education Research: A Systematic Review of Literature

    Science.gov (United States)

    Brown, Philip R.; McCord, Rachel E.; Matusovich, Holly M.; Kajfez, Rachel L.

    2015-01-01

    Motivation is frequently studied in the context of engineering education. However, the use of the term motivation can be inconsistent, both in how clearly it is defined and in how it is implemented in research designs and practice. This systematic literature review investigates the use of motivation across recent engineering education…

  2. Supporting collaboration in interdisciplinary research of water–energy–food nexus by means of ontology engineering

    Directory of Open Access Journals (Sweden)

    Terukazu Kumazawa

    2017-06-01

    The introduction of ontology engineering approach will enable us to share a common language and a common theoretical basis. But the development of the new method based on ontology engineering is necessary. For example, knowledge structuring according to each perspective of researchers and simple figure accompanied with a reasoned argument in the background are the directions of tool development.

  3. FY2011 Annual Progress Report for Advanced Combustion Engine Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-12-01

    Annual Progress Report for the Advanced Combustion Engine Research and Development (R&D) subprogram supporting the mission of the Vehicle Technologies Program by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that meet future federal emissions regulations.

  4. Linking Civil Engineering Education And Research With Industry (Session Keynote)

    DEFF Research Database (Denmark)

    Virdi, Kuldeep

    Linking engineering education with industry has been a basic aim of educators almost from the beginning of modern degree programmes. In the USA, reference is often made to ‘co-operative education’, where students spend periods in industry within the duration of their stay in a university. Indeed...... City University is regarded as a pioneer of sandwich education, another name for co-operative education, in the UK. The paper examines various factors and constraints which relate to successful integration of education and practice within a degree programme. The paper covers the role of professional...

  5. NASA Engine Icing Research Overview: Aeronautics Evaluation and Test Capabilities (AETC) Project

    Science.gov (United States)

    Veres, Joseph P.

    2015-01-01

    The occurrence of ice accretion within commercial high bypass aircraft turbine engines has been reported by airlines under certain atmospheric conditions. Engine anomalies have taken place at high altitudes that have been attributed to ice crystal ingestion by the engine. The ice crystals can result in degraded engine performance, loss of thrust control, compressor surge or stall, and flameout of the combustor. The Aviation Safety Program at NASA has taken on the technical challenge of a turbofan engine icing caused by ice crystals which can exist in high altitude convective clouds. The NASA engine icing project consists of an integrated approach with four concurrent and ongoing research elements, each of which feeds critical information to the next element. The project objective is to gain understanding of high altitude ice crystals by developing knowledge bases and test facilities for testing full engines and engine components. The first element is to utilize a highly instrumented aircraft to characterize the high altitude convective cloud environment. The second element is the enhancement of the Propulsion Systems Laboratory altitude test facility for gas turbine engines to include the addition of an ice crystal cloud. The third element is basic research of the fundamental physics associated with ice crystal ice accretion. The fourth and final element is the development of computational tools with the goal of simulating the effects of ice crystal ingestion on compressor and gas turbine engine performance. The NASA goal is to provide knowledge to the engine and aircraft manufacturing communities to help mitigate, or eliminate turbofan engine interruptions, engine damage, and failures due to ice crystal ingestion.

  6. A review of internal combustion engine combustion chamber process studies at NASA Lewis Research Center

    Science.gov (United States)

    Schock, H. J.

    1984-01-01

    The performance of internal combustion stratified-charge engines is highly dependent on the in-cylinder fuel-air mixing processes occurring in these engines. Current research concerning the in-cylinder airflow characteristics of rotary and piston engines is presented. Results showing the output of multidimensional models, laser velocimetry measurements and the application of a holographic optical element are described. Models which simulate the four-stroke cycle and seal dynamics of rotary engines are also discussed. Previously announced in STAR as N84-24999

  7. Research in progress at the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1987-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, and computer science during the period April 1, 1987 through October 1, 1987.

  8. [Research Conducted at the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1997-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period 1 Oct. 1996 - 31 Mar. 1997.

  9. Summaries of the Idaho National Engineering Laboratory Radioecology and Ecology Program research projects

    International Nuclear Information System (INIS)

    Markham, O.D.

    1987-06-01

    This report provides summaries of individual research projects conducted by the Idaho National Engineering Laboratory Radioecology and Ecology Program. Summaries include projects in various stages, from those that are just beginning, to projects that are in the final publication stage

  10. Research on the actual condition on the licensed chief engineers of radiation

    International Nuclear Information System (INIS)

    1976-01-01

    A research on the actual condition on the licensed chief engineers of radiation was performed on October, 1975. Question cards were sent to 2915 facilities in Japan, and answers came back from 2850 facilities. Answers report the size of each facility, number of employee, number of chief engineers in charge, age of chief engineers, appointment authority, responsibility, improvement of working condition of chief engineer, and assistant officer for chief engineer. The number of worker is 62,456 in 2,769 facilities. The number of chief engineer in charge is 3,286 containing 579 doctor and/or dentist. The age of chief in 80 percent facilities is above 31. System of management of radiation safety was also investigated. (Kato, T.)

  11. High-throughput analysis using AmpFlSTR® Identifiler® with the Applied Biosystems 3500xl Genetic Analyser.

    Science.gov (United States)

    Kirkham, Amanda; Haley, John; Haile, Yordina; Grout, Andrea; Kimpton, Colin; Al-Marzouqi, Ahmed; Gill, Peter

    2013-01-01

    High throughput analysis of buccal scrape reference samples using the Identifiler system on the Applied Biosystems 3500xl Genetic Analyser is described. This platform is much more sensitive than previous platforms, e.g. 3130xl. The range of signal detection is also much greater and this means that the system is more tolerant to a wide range of input template concentrations. DNA quantity is not a limiting factor in the analysis of buccal scrapes, hence the entire analytical procedure (process) was designed around a target input of 1.5ng, to minimise low level DNA profiles and associated events of allele dropout. A universal stochastic threshold/limit of detection (LOD) of 300relative fluorescent units (rfu) was applied across all loci. This level is twice that of comparable systems such as SGM Plus analysed on 3130xl instruments. After analysis of dropout probabilities, heterozygous balance, drop-in and stutter characteristics, rule-sets were programmed into the FSS i-cubed software. The process has a success rate >95%. No discordances or mis-designations occurred when applied to a validation set of more than 1000 samples. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  12. Operational safety related human engineering research in Finland

    International Nuclear Information System (INIS)

    Haapanen, P.; Wahlstroem, B.

    1984-01-01

    Human errors contribute considerably to the total risk of the nuclear power plants as was clearly demonstrated at the TMI-accident in 1979. This fact was recognized early in Finland and a comprehensive research program was established in the second half of the 1970s. This paper gives a short description of some research projects in this program. (author)

  13. Frontiers in chemical engineering: research needs and opportunities

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Physical Sciences, Mathematics, and Applications; Division on Engineering and Physical Sciences; National Research Council

    1988-01-01

    ...: Research Needs and Opportunities Board on Chemical Sciences and Technology Commission on Physical Sciences, Mathematics, and Resources National Research Council NATIONAL ACADEMY PRESS Washington, D.C. 1988 i Copyrighttrue Please breaks inserted. are Page files. accidentally typesetting been have may original from the errors not typographic original ret...

  14. Systems Engineering-Based Tool for Identifying Critical Research Systems

    Science.gov (United States)

    Abbott, Rodman P.; Stracener, Jerrell

    2016-01-01

    This study investigates the relationship between the designated research project system independent variables of Labor, Travel, Equipment, and Contract total annual costs and the dependent variables of both the associated matching research project total annual academic publication output and thesis/dissertation number output. The Mahalanobis…

  15. Call for expressions of interest: Strengthening engineering research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    cgu

    2017-08-14

    Aug 14, 2017 ... a range of public and private stakeholders to propose novel ways of delivering quality and relevant training .... expertise in funding leading-edge research and supporting individual and organizational capacity-building ... research (e.g., the World Bank's African Centres of Excellence programmes).

  16. Science Teachers' Misconceptions in Science and Engineering Distinctions: Reflections on Modern Research Examples

    Science.gov (United States)

    Antink-Meyer, Allison; Meyer, Daniel Z.

    2016-10-01

    The aim of this exploratory study was to learn about the misconceptions that may arise for elementary and high school science teachers in their reflections on science and engineering practice. Using readings and videos of real science and engineering work, teachers' reflections were used to uncover the underpinnings of their understandings. This knowledge ultimately provides information about supporting professional development (PD) for science teachers' knowledge of engineering. Six science teachers (two elementary and four high school teachers) participated in the study as part of an online PD experience. Cunningham and Carlsen's (Journal of Science Teacher Education 25:197-210, 2014) relative emphases of science and engineering practices were used to frame the design of PD activities and the analyses of teachers' views. Analyses suggest misconceptions within the eight practices of science and engineering from the US Next Generation Science Standards in four areas. These are that: (1) the nature of the practices in both science and engineering research is determined by the long-term implications of the research regardless of the nature of the immediate work, (2) engineering and science are hierarchical, (3) creativity is inappropriate, and (4) research outcomes cannot be processes. We discuss the nature of these understandings among participants and the implications for engineering education PD for science teachers.

  17. Research Update: Phonon engineering of nanocrystalline silicon thermoelectrics

    Directory of Open Access Journals (Sweden)

    Junichiro Shiomi

    2016-10-01

    Full Text Available Nanocrystalline silicon thermoelectrics can be a solution to improve the cost-effectiveness of thermoelectric technology from both material and integration viewpoints. While their figure-of-merit is still developing, recent advances in theoretical/numerical calculations, property measurements, and structural synthesis/fabrication have opened up possibilities to develop the materials based on fundamental physics of phonon transport. Here, this is demonstrated by reviewing a series of works on nanocrystalline silicon materials using calculations of multiscale phonon transport, measurements of interfacial heat conduction, and synthesis from nanoparticles. Integration of these approaches allows us to engineer phonon transport to improve the thermoelectric performance by introducing local silicon-oxide structures.

  18. Heat Extraction Project, geothermal reservoir engineering research at Stanford

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, P.

    1989-01-01

    The main objective of the SGP Heat Extraction Project is to provide a means for estimating the thermal behavior of geothermal fluids produced from fractured hydrothermal resources. The methods are based on estimated thermal properties of the reservoir components, reservoir management planning of production and reinjection, and the mixing of reservoir fluids: geothermal, resource fluid cooled by drawdown and infiltrating groundwater, and reinjected recharge heated by sweep flow through the reservoir formation. Several reports and publications, listed in Appendix A, describe the development of the analytical methods which were part of five Engineer and PhD dissertations, and the results from many applications of the methods to achieve the project objectives. The Heat Extraction Project is to evaluate the thermal properties of fractured geothermal resource and forecasted effects of reinjection recharge into operating reservoirs.

  19. Systematic literature reviews in software engineering: preliminary results from interviews with researchers

    OpenAIRE

    Ali Babar, Muhammad; Zhang, He

    2009-01-01

    peer-reviewed Systematic Literature Reviews (SLRs) have been gaining significant attention from software engineering researchers since 2004. Several researchers have reported their experiences of and lessons learned from applying systematic reviews to different subject matters in software engineering. However, there has been no attempt at independently exploring experiences and perceptions of the practitioners of systematic reviews in order to gain an in-depth understanding of various aspe...

  20. Progress in research and regulatory development by the Materials Engineering Branch, RES Engineering Division

    International Nuclear Information System (INIS)

    Serpan, C.Z. Jr.

    1988-01-01

    Much activity has been underway In NRC this past year on definition of aging Issues for nuclear power plants that will be applicable to the regulatory considerations of applications for license renewals following the Initial 40-year operating period. The Materials Engineering Branch has been reviewing its program to assure that aging Issues are prominent, and to identify regulatory documents that will have to be validated or revised to provide a proper basis for license renewal safety evaluation. A report on the branch plan for aging and needs for extended life review is under preparation and should be available early in 1988

  1. Physical chemistry research for engineering and applied sciences

    CERN Document Server

    Pearce, Eli M; Pethrick, Richard A; Zaikov, Gennady E

    2015-01-01

    PrefaceRegularity of Oxidation of Waste Fibrous and Film Materials of Polyethylene and Polypropylene: A Research Note; M. V. Bazunova, S. V. Kolesov, R. F. Tukhvatullin, E. I. Kulish, G. E. ZaikovA Research Note on Creation of ?arbon-Polymer Nanocomposites with Polyethylene as a Binder; Sergei V. Kolesov, Marina V. Bazunova, Elena I. Kulish, Denis R. Valiev, and Gennady E. ZaikovA Research Note on the Influence of Hybrid Antioxidants Ichphans on the Structure of Liposome Lipid Bilayer; E. Yu. Parshina, L. Ya. Gendel', and A. B. RubinDynamically Vulcanized Thermoelastoplastics Based on Butadien

  2. Experiences with project-oriented research in graduate engineering education

    International Nuclear Information System (INIS)

    Miley, G.H.

    1976-01-01

    Two examples of project-oriented research that involve the conceptual design of fusion systems are described. One of these projects involved close collaboration with workers in a national laboratory while the second was formally organized as a cooperative effort with two other laboratories. An important educational aspect of such research is that the students are involved in a design team composed of both students and professionals facing a realistic problem. In retrospect, it appears that both students and faculty profited from the experience. Several students have taken jobs in related areas, and additional research has resulted at the University from new insight gained during the projects

  3. Report 1986/1987. Department of Nuclear Engineering and Applied Research

    International Nuclear Information System (INIS)

    1989-01-01

    The objective of the Department of Applied Research is to carry out research on fields of physics, materials sciences, chemistry and engineering. Some branches of research can be mentioned: high Tc superconductors, hydrogen storage in metallic hydrides, extractive metallurgy of strategic minerals and others. In the first case, both the Development Division and the Thermodynamics group in the Metallurgy Division, have actively participated [es

  4. Cognitive Mapping Techniques: Implications for Research in Engineering and Technology Education

    Science.gov (United States)

    Dixon, Raymond A.; Lammi, Matthew

    2014-01-01

    The primary goal of this paper is to present the theoretical basis and application of two types of cognitive maps, concept map and mind map, and explain how they can be used by educational researchers in engineering design research. Cognitive mapping techniques can be useful to researchers as they study students' problem solving strategies…

  5. Three Dimensions of Learning: Experiential Activity for Engineering Innovation Education and Research

    Science.gov (United States)

    Killen, Catherine P.

    2015-01-01

    This paper outlines a novel approach to engineering education research that provides three dimensions of learning through an experiential class activity. A simulated decision activity brought current research into the classroom, explored the effect of experiential activity on learning outcomes and contributed to the research on innovation decision…

  6. Some research advances in computer graphics that will enhance applications to engineering design

    Science.gov (United States)

    Allan, J. J., III

    1975-01-01

    Research in man/machine interactions and graphics hardware/software that will enhance applications to engineering design was described. Research aspects of executive systems, command languages, and networking used in the computer applications laboratory are mentioned. Finally, a few areas where little or no research is being done were identified.

  7. Cross-Cultural Communication Training for Students in Multidisciplinary Research Area of Biomedical Engineering

    Directory of Open Access Journals (Sweden)

    Shigehiro Hashimoto

    2014-08-01

    Full Text Available Biomedical Engineering makes multidisciplinary research area, which includes biology, medicine, engineering and others. Communication training is important for students, who have a potential to develop Biomedical Engineering. Communication is not easy in a multidisciplinary research area, because each area has its own background of thinking. Because each nation has its own background of culture, on the other hand, international communication is not easy, either. A cross-cultural student program has been designed for communication training in the multidisciplinary research area. Students from a variety of backgrounds of research area and culture have joined in the program: mechanical engineering, material science, environmental engineering, science of nursing, dentist, pharmacy, electronics, and so on. The program works well for communication training in the multidisciplinary research area of biomedical engineering. Foreign language and digital data give students chance to study several things: how to make communication precisely, how to quote previous data. The experience in the program helps students not only understand new idea in the laboratory visit, but also make a presentation in the international research conference. The program relates to author's several experiences: the student internship abroad, the cross-cultural student camp, multi PhD theses, various affiliations, and the creation of the interdisciplinary department.

  8. Annual report of Nuclear Engineering Research Laboratory, University of Tokyo in fiscal 1992

    International Nuclear Information System (INIS)

    1993-07-01

    In this annual report, the activities of education and research, the state of operation of research facilities and others in Nuclear Engineering Research Laboratory, University of Tokyo in fiscal year 1992 are summarized. In this Laboratory, there are four large research facilities, that are, the fast neutron source reactor 'Yayoi', the electron beam linac, the nuclear fusion reactor blanket experiment facility and the heavy irradiation research facility. Those are used for carrying out education and research in the wide fields of nuclear engineering, and are offered also for joint utilization. The results of research by using respective research facilities have been summarized in separate reports. The course of the management and operation of each research facility is described, and the research activities, the theses for doctorate and graduation these of teachers, personnel and graduate students in the Laboratory are summarized. (J.P.N.)

  9. Protocol, Engineering Research Center, University of California, Santa Barbara

    National Research Council Canada - National Science Library

    Melliar-Smith, P. M

    2005-01-01

    .... More specifically, the research has focused on: (1) the design and evaluation of protocols for real-time performance, fault tolerance and security, as well as protocols for mobile wireless environments; (2...

  10. Applying Web-Based Tools for Research, Engineering, and Operations

    Science.gov (United States)

    Ivancic, William D.

    2011-01-01

    Personnel in the NASA Glenn Research Center Network and Architectures branch have performed a variety of research related to space-based sensor webs, network centric operations, security and delay tolerant networking (DTN). Quality documentation and communications, real-time monitoring and information dissemination are critical in order to perform quality research while maintaining low cost and utilizing multiple remote systems. This has been accomplished using a variety of Internet technologies often operating simultaneously. This paper describes important features of various technologies and provides a number of real-world examples of how combining Internet technologies can enable a virtual team to act efficiently as one unit to perform advanced research in operational systems. Finally, real and potential abuses of power and manipulation of information and information access is addressed.

  11. MaTech - the BMFT ''new materials'' materials research program - 1994 annual report about new materials for innovative information technology, energy technology, traffic engineering, medical engineering and production engineering applications, and about general materials research and new fields

    International Nuclear Information System (INIS)

    Lillack, D.; Gilbert, I.; Runte, S.

    1995-01-01

    This annual report gives a survey of projects supported within the framework of the Matfo and Ma-Tech programs. These projects focus on research into materials for innovative: 1. information technology, 2. energy technology, 3. traffic engineering, 4. medical engineering, and 5. production engineering applications and on 6. general materials research and new fields. The descriptions of individual projects indicate project goals and work schedules, names of important sub-contractors, and total costs and the funds contributed by BMFT. Information added in an annex includes inter alia a list of publications, lectures, contracts, or patents resulting from project activities in the year 1994. (MM) [de

  12. Organizational Influences on Interdisciplinary Interactions during Research and Design of Large-Scale Complex Engineered Systems

    Science.gov (United States)

    McGowan, Anna-Maria R.; Seifert, Colleen M.; Papalambros, Panos Y.

    2012-01-01

    The design of large-scale complex engineered systems (LaCES) such as an aircraft is inherently interdisciplinary. Multiple engineering disciplines, drawing from a team of hundreds to thousands of engineers and scientists, are woven together throughout the research, development, and systems engineering processes to realize one system. Though research and development (R&D) is typically focused in single disciplines, the interdependencies involved in LaCES require interdisciplinary R&D efforts. This study investigates the interdisciplinary interactions that take place during the R&D and early conceptual design phases in the design of LaCES. Our theoretical framework is informed by both engineering practices and social science research on complex organizations. This paper provides preliminary perspective on some of the organizational influences on interdisciplinary interactions based on organization theory (specifically sensemaking), data from a survey of LaCES experts, and the authors experience in the research and design. The analysis reveals couplings between the engineered system and the organization that creates it. Survey respondents noted the importance of interdisciplinary interactions and their significant benefit to the engineered system, such as innovation and problem mitigation. Substantial obstacles to interdisciplinarity are uncovered beyond engineering that include communication and organizational challenges. Addressing these challenges may ultimately foster greater efficiencies in the design and development of LaCES and improved system performance by assisting with the collective integration of interdependent knowledge bases early in the R&D effort. This research suggests that organizational and human dynamics heavily influence and even constrain the engineering effort for large-scale complex systems.

  13. CAD, 3D modeling, engineering analysis, and prototype experimentation industrial and research applications

    CERN Document Server

    Zheng Li, Jeremy

    2015-01-01

    This succinct book focuses on computer aided design (CAD), 3-D modeling, and engineering analysis and the ways they can be applied effectively in research and industrial sectors including aerospace, defense, automotive, and consumer products. These efficient tools, deployed for R&D in the laboratory and the field, perform efficiently three-dimensional modeling of finished products, render complex geometrical product designs, facilitate structural analysis and optimal product design, produce graphic and engineering drawings, and generate production documentation. Written with an eye toward green energy installations and novel manufacturing facilities, this concise volume enables scientific researchers and engineering professionals to learn design techniques, control existing and complex issues, proficiently use CAD tools, visualize technical fundamentals, and gain analytic and technical skills. This book also: ·       Equips practitioners and researchers to handle powerful tools for engineering desi...

  14. GLOBAL JOURNAL OF ENGINEERING RESEARCH VOL 11, NO

    African Journals Online (AJOL)

    Engr. Ushie

    The output power of the constructed device was found to be 290 ... medical equipment and industrial research laboratories ... regulation. This happens in unregulated power supplies where the output voltage is never constant. It changes with supply voltage or load resistance. Hence, the purpose of voltage regulator circuit is ...

  15. Strengthening engineering research and training in Africa | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC seeks to bridge the gap between the supply of, and demand for, research and training in applied science fields to support direct applications to socioeconomic ... Dans le dernier numéro du bulletin de BRAS, lisez un message d'adieu de Simon Carter, directeur régional du bureau du CRDI en Afrique subsaharienne.

  16. Systems Engineering Research Needs and Workforce Development Assessment

    Science.gov (United States)

    2018-01-31

    Machine Learning ................................................................. 9 Cluster 2: MBSE, Decision Making and Integration...research objective are also highlighted: 1. Knowledge, Data and Machine Learning a) AI/Machine Learning ; b) Data Analytics c) Data/Complexity d...System Trust e) System Testing Python scripts using open source packages for Natural Language Processing was the tool chosen for analyzing the

  17. Genetic engineering of plants: agricultural research opportunities and policy concerns

    National Research Council Canada - National Science Library

    National Research Council Staff; National Research Council; Agriculture Board of National Research Council; National Academy of Sciences

    1984-01-01

    ... National Research Council NATIONAL ACADEMY PRESS Washington, D.C. 1984 i Copyrightthe true use are Please breaks Page inserted. accidentally typesetting been have may original the from errors not the retained, typographic book, paper some original from created cannot however, be files XML from recomposed formatting, been typesetting-specific work has original o...

  18. Strengthening engineering research and training in Africa | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC seeks to bridge the gap between the supply of, and demand for, research and training in applied science fields to support direct applications to socioeconomic development at the regional and national scales. This call for proposals challenges universities as well as public and private stakeholders to develop and ...

  19. Journal of Civil Engineering Research and Practice: Advanced Search

    African Journals Online (AJOL)

    Search tips: Search terms are case-insensitive; Common words are ignored; By default only articles containing all terms in the query are returned (i.e., AND is implied); Combine multiple words with OR to find articles containing either term; e.g., education OR research; Use parentheses to create more complex queries; e.g., ...

  20. Rural bioenergy: innovative integrated biosystem design for fuel and food from agrowastes

    Energy Technology Data Exchange (ETDEWEB)

    Selvam, Pagandai V. Pannir; Santiago, Brunno Henrique de S. [Universidade Federal de Alagoas (UFAL), Maceio, AL (Brazil)], email: pannirbr@gmail.com; Almeida, Louizy Minora C.A. de; Israel, Samy B.S. [Universidade Federal do Rio Grande do Norte (DEQ/CT/UFRN), Natal, RN (Brazil). Centro de Tecnologia. Dept. de Engenharia Quimica

    2008-07-01

    Brazil is the leader known for its ethanol biofuel development, but also for biomass charcoal, yet lacks in clean rural biofuel production. This paper deals with the system design for sustainable rural projects developments based on the the bioenergy production from biomass wastes using Innovative process equipment design and the process optimization. With the economic objective towards sustainable clean small scale rural energy production, and also the co-production of hot, cold thermal energy, at first, several preliminary projects had been developed and analysed. Then, a detailed project engineering and the results on economical viability were obtained. The dynamic material, energy and cash flow models of the complex integrated food processing and small scale energy productions, were at first constructed using excel electronic spread sheet for Windows. Computer aided system for process modeling and simulation using SUPERPRO, Intelligent Inc. Economic feasibilities studies using genetics algorithms are under developments. The preliminary analysis of cost and investments of the the integrated biomass utilisation projects which are included for this study are: biological aerobic treatment process, methane gas production using anaerobic digestion process, aerobic composting, drying of tropical fruits, effluent treatments, biogas and syngas production as well as cogeneration of energy production for drying and cooling using biogas. These models allowed us the identification of tech economical and scale up problems. The results obtained with several preliminary project development with few case studies are reported for integrated project developments for fuel and food using process and cost simulation models. Several economic problems related with implementation of the small scale rural energy system for sustained local developments based on tropical fruit producing rural areas are analysed and a concept of the integrated bio system for micro enterprise has been

  1. PERSPECTIVE: Translational neural engineering: multiple perspectives on bringing benchtop research into the clinical domain

    Science.gov (United States)

    Rousche, Patrick; Schneeweis, David M.; Perreault, Eric J.; Jensen, Winnie

    2008-03-01

    A half-day forum to address a wide range of issues related to translational neural engineering was conducted at the annual meeting of the Biomedical Engineering Society. Successful practitioners of translational neural engineering from academics, clinical medicine and industry were invited to share a diversity of perspectives and experiences on the translational process. The forum was targeted towards traditional academic researchers who may be interested in the expanded funding opportunities available for translational research that emphasizes product commercialization and clinical implementation. The seminar was funded by the NIH with support from the Rehabilitation Institute of Chicago. We report here a summary of the speaker viewpoints with particular focus on extracting successful strategies for engaging in or conducting translational neural engineering research. Daryl Kipke, PhD, (Department of Biomedical Engineering at the University of Michigan) and Molly Shoichet, PhD, (Department of Chemical Engineering at the University of Toronto) gave details of their extensive experience with product commercialization while holding primary appointments in academic departments. They both encouraged strong clinical input at very early stages of research. Neurosurgeon Fady Charbel, MD, (Department of Neurosurgery at the University of Illinois at Chicago) discussed his role in product commercialization as a clinician. Todd Kuiken, MD, PhD, (Director of the Neural Engineering for Artificial Limbs at the Rehabilitation Institute of Chicago, affiliated with Northwestern University) also a clinician, described a model of translational engineering that emphasized the development of clinically relevant technology, without a strong commercialization imperative. The clinicians emphasized the importance of communicating effectively with engineers. Representing commercial neural engineering was Doug Sheffield, PhD, (Director of New Technology at Vertis Neuroscience, Inc.) who

  2. Compilation of reports from research supported by the Materials Engineering Branch, Division of Engineering: 1991--1993. Volume 2

    International Nuclear Information System (INIS)

    Hiser, A.L.

    1994-06-01

    Since 1965, the Materials Engineering Branch, Division of Engineering, of the Nuclear Regulatory Commission's Office of Nuclear Regulatory Research, and its predecessors dating back to the Atomic Energy Commission (AEC), has sponsored research programs concerning the integrity of the primary system pressure boundary of light water reactors. The components of concern in these research programs have included the reactor pressure vessel (RPV), steam generators, and the piping. These research programs have covered a broad range of topics, including fracture mechanics analysis and experimental work for RPV and piping applications, inspection method development and qualification, and evaluation of irradiation effects to RPV steels. This report provides as complete a listing as practical of formal technical reports submitted to the NRC by the investigators working on these research programs. This listing includes topical, final and progress reports, and is segmented by topic area. In many cases a report will cover several topics (such as in the case of progress reports of multi-faceted programs), but is listed under only one topic. Therefore, in searching for reports on a specific topic, other related topic areas should be checked also. The separate volumes of this report cover the following periods: Volume 1: 1965--1990 and Volume 2: 1991--1993

  3. Compilation of reports from research supported by the Materials Engineering Branch, Division of Engineering: 1965--1990

    International Nuclear Information System (INIS)

    Hiser, A.L.

    1991-05-01

    Since 1965, the Materials Engineering Branch, Division of Engineering, of the Nuclear Regulatory Commission's Office of Nuclear Regulatory Research, and its predecessors dating back to the Atomic Energy Commission (AEC), has sponsored research programs concerning the integrity of the primary system pressure boundary of light water reactors. The components of concern in these research programs have included the reactor pressure vessel (RPV), steam generators, and the piping. These research programs have covered a broad range of topics, including fracture mechanics analysis and experimental work for RPV and piping applications, inspection method development and qualification, and evaluation of irradiation effects to RPV steels. This report provides as complete a listing as practical of formal technical reports submitted to the NRC by the investigators working on these research programs. This listing includes topical, final and progress reports, and is segmented by topic area. In many cases a report will cover several topics (such as in the case of progress reports of multi-faceted programs), but is listed under only one topic. Therefore, in searching for reports on a specific topic, other related topic areas should be checked also

  4. Lightweight Portable Plasma Medical Device - Plasma Engineering Research Laboratory

    Science.gov (United States)

    2013-10-01

    sensors namely NOXCANg and Testo 350 M/XL gas analyzers. C. Bacterial sample preparation and plasma treatment procedure Bacterial samples of S...the pneumococcus, otitis media (OM) is one of the highest prevalent pediatric diseases worldwide. 17 OM is the most frequently 52 diagnosed...Thiyagarajan (Principal), “Fundamental Research on Electrochemical Effects of Using Non-thermal Non-equilibrium Microwave Plasmas on Low-rank Coal

  5. Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1989

    International Nuclear Information System (INIS)

    1990-01-01

    This is the report of the results of research carried out by the common utilization of the reactor 'Yayoi' and an electron accelerator in the Nuclear Engineering Research Laboratory in fiscal year 1989. In fiscal year 1989, the research themes using the reactor Yayoi or related to it were 15, and those using the linear accelerator reached 12, thus the common utilization attracted the strong interest of users. The Yayoi has been operated satisfactorily without trouble. The results of the research carried out by the common utilization of the Yayoi and a linac and the reports of 12 Yayoi research meetings in fiscal year 1989 are collected. (J.P.N.)

  6. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1983. Vol.2

    International Nuclear Information System (INIS)

    1984-03-01

    This report presents summaries of the research work performed during Fiscal Year 1983 by laboratories and organizations under contracts administered by the NRC's Materials Engineering Branch, Office of Nuclear Regulatory Research. Each contractor has written a more complete and detailed annual report of their work which can be obtained by writing to NRC. The contractor reports are organized into the major areas of concern to Primary System Integrity, which is the main focus for the branch's research. These areas are: Vessel and Piping Fracture Mechanics; Pressure Vesel Surveillance Dosimetry; Steam Generators, Aging, and Environmental Cracking; and Non-Destructive Examination. The research programs reported provide information on the overall program objectives, a more limited scope of work for FY 1983, a technical description of the year's work, and a brief forecast of the plans for continuing work

  7. Establishing the Research Agenda for Increasing the Representation of Women in Engineering and Computing.

    Science.gov (United States)

    Buse, Kathleen; Hill, Catherine; Benson, Kathleen

    2017-01-01

    While there is an extensive body of research on gender equity in engineering and computing, there have been few efforts to glean insight from a dialog among experts. To encourage collaboration and to develop a shared vision of the future research agenda, a 2 day workshop of 50 scholars who work on the topic of gender in engineering and computing was held at a rural conference center. The structure of the conference and the location allowed for time to reflect, dialog, and to craft an innovative research agenda aimed at increasing the representation of women in engineering and computing. This paper has been written by the conference organizers and details the ideas and recommendations from the scholars. The result is an innovative, collaborative approach to future research that focuses on identifying effective interventions. The new approach includes the creation of partnerships with stakeholders including businesses, government agencies, non-profits and academic institutions to allow a broader voice in setting research priorities. Researchers recommend incorporating multiple disciplines and methodologies, while expanding the use of data analytics, merging and mining existing databases and creating new datasets. The future research agenda is detailed and includes studies focused on socio-cultural interventions particularly on career choice, within undergraduate and graduate programs, and for women in professional careers. The outcome is a vision for future research that can be shared with researchers, practitioners and other stakeholders that will lead to gender equity in the engineering and computing professions.

  8. Magnetohydrodynamic research in fusion blanket engineering and metallurgical processing

    International Nuclear Information System (INIS)

    Tokuhiro, A.

    1991-11-01

    A review of recent research activities in liquid metal magnetohydrodynamics (LM-MHDs) is presented in this article. Two major reserach areas are discussed. The first topic involves the thermomechanical design issues in a proposed tokamak fusion reactor. The primary concerns are in the magneto-thermal-hydraulic performance of a self-cooled liquid metal blanket. The second topic involves the application of MHD in material processing in the metallurgical and semiconductor industries. The two representative applications are electromagnetic stirring (EMS) of continuously cast steel and the Czochralski (CZ) method of crystal growth in the presence of a magnetic field. (author) 24 figs., 10 tabs., 136 refs

  9. Thermonuclear Power Engineering: 60 Years of Research. What Comes Next?

    Science.gov (United States)

    Strelkov, V. S.

    2017-12-01

    This paper summarizes results of more than half a century of research of high-temperature plasmas heated to a temperature of more than 100 million degrees (104 eV) and magnetically insulated from the walls. The energy of light-element fusion can be used for electric power generation or as a source of fissionable fuel production (development of a fusion neutron source—FNS). The main results of studies of tokamak plasmas which were obtained in the Soviet Union with the greatest degree of thermal plasma isolation among all other types of devices are presented. As a result, research programs of other countries were redirected to tokamaks. Later, on the basis of the analysis of numerous experiments, the international fusion community gradually came to an opinion that it is possible to build a tokamak (ITER) with Q > 1 (where Q is the ratio of the fusion power to the external power injected into the plasma). The ITER program objective is to achieve Q = 1-10 for a discharge time of up to 1000 s. The implementation of this goal does not solve the problem of a steadystate operation. The solution to this problem is a reliable first wall and current generation. This is a task of the next fusion power plant construction stage, called DEMO. Comparison of DEMO and FNS parameters shows that, at this development stage, the operating parameters and conditions of these devices are identical.

  10. The research on teaching reformation of photoelectric information science and engineering specialty experiments

    Science.gov (United States)

    Zhu, Zheng; Yang, Fan; Zhang, Yang; Geng, Tao; Li, Yuxiang

    2017-08-01

    This paper introduced the idea of teaching reformation of photoelectric information science and engineering specialty experiments. The teaching reformation of specialty experiments was analyzed from many aspects, such as construction of specialized laboratory, experimental methods, experiment content, experiment assessing mechanism, and so on. The teaching of specialty experiments was composed of four levels experiments: basic experiments, comprehensive and designing experiments, innovative research experiments and engineering experiments which are aiming at enterprise production. Scientific research achievements and advanced technology on photoelectric technology were brought into the teaching of specialty experiments, which will develop the students' scientific research ability and make them to be the talent suitable for photoelectric industry.

  11. Challenges and Opportunities for Establishing Design as a Research Discipline in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn

    2013-01-01

    There are a number of fields including architecture, industrial design, and urban planning and design, where design is the discipline upon which all research and teaching activities are based. In other fields such as aerospace and mechanical engineering, design is a sub-discipline with its own...... faculty, research and education communities, conferences, and journals. However, design remains an emerging sub-discipline in civil and environmental engineering – practiced, valued, and taught but not subject to rigorous academic research. This paper presents some of the challenges associated...... with the establishment of design as a research discipline within civil and environmental engineering, some of the benefits and opportunities that will come from that establishment, and some evidence for the fact that this process has already begun....

  12. Current Status and Issues of Nuclear Engineering Research and Educational Facilities in Universities

    International Nuclear Information System (INIS)

    2004-01-01

    It is important to discuss about nuclear engineering research and educational facilities in universities after new educational foundation. 12 universities investigated issues and a countermeasure of them. The results of a questionnaire survey, issues and countermeasure are shown in this paper. The questionnaire on the future nuclear researches, development of education, project, maintenance of nuclear and radioactive facilities and accelerator, control of uranium in subcritical test facilities, use of new corporation facilities, the fixed number of student, number of graduate, student experiments, themes of experiments and researches, the state of educational facilities are carried out. The results of questionnaire were summarized as followings: the fixed number of student (B/M/D) on nuclear engineering, exercise of reactor, education, themes, educational and research facilities, significance of nuclear engineering education in university and proposal. (S.Y.)

  13. Academic Identity Reconstruction: The Transition of Engineering Academics to Engineering Education Researchers

    Science.gov (United States)

    Gardner, Anne; Willey, Keith

    2018-01-01

    The field of research (FoR) that an academic participates in is both a manifestation of, and a contributor to the development of their identity. When an academic changes that FoR the question then arises as to how they reconcile this change with their identity. This paper uses the identity-trajectory framework to analyse the discourse of 19…

  14. Engineering Research and Development and Technology thrust area report FY92

    International Nuclear Information System (INIS)

    Langland, R.T.; Minichino, C.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering

  15. Engineering Research and Development and Technology thrust area report FY92

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R.T.; Minichino, C. [eds.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.

  16. Research on cylinder processes of gasoline homogenous charge compression ignition (HCCI) engine

    Science.gov (United States)

    Cofaru, Corneliu

    2017-10-01

    This paper is designed to develop a HCCI engine starting from a spark ignition engine platform. The engine test was a single cylinder, four strokes provided with carburetor. The results of experimental research on this version were used as a baseline for the next phase of the work. After that, the engine was modified for a HCCI configuration, the carburetor was replaced by a direct fuel injection system in order to control precisely the fuel mass per cycle taking into account the measured intake air-mass. To ensure that the air - fuel mixture auto ignite, the compression ratio was increased from 9.7 to 11.5. The combustion process in HCCI regime is governed by chemical kinetics of mixture of air-fuel, rein ducted or trapped exhaust gases and fresh charge. To modify the quantities of trapped burnt gases, the exchange gas system was changed from fixed timing to variable valve timing. To analyze the processes taking place in the HCCI engine and synthesizing a control system, a model of the system which takes into account the engine configuration and operational parameters are needed. The cylinder processes were simulated on virtual model. The experimental research works were focused on determining the parameters which control the combustion timing of HCCI engine to obtain the best energetic and ecologic parameters.

  17. A Report on the 40th International Symposium Actual Tasks on Agricultural Engineering, 21-24 February 2012, Opatija, Croatia

    OpenAIRE

    Silvio Kosutic; Daniele De Wrachien

    2012-01-01

    The 40th International Symposium, Actual Tasks on Agricultural Engineering, was held on 21-24 February 2012 in the “Grand Hotel Adriatic”, Opatija, in the Republic of Croatia. It was organized by the Agricultural Engineering Department of the Faculty of Agriculture of the University of Zagreb, and was supported by the Department of Agricultural Engineering of the Faculty of Agriculture of the J.J. Strossmayer University, Osijek, the Department of Bio-Systems Engineering of the Faculty of Agri...

  18. Report on the 41st International Symposium Actual Tasks on Agricultural Engineering, 19-22 February 2013, Opatija, Croatia

    OpenAIRE

    Silvio Kosutic; Daniele De Wrachien

    2013-01-01

    The 41st International Symposium Actual Tasks on Agricultural Engineering was held on 19th-22nd February 2013 in Grand Hotel Adriatic Opatija, Republic of Croatia. The principal Organiser, Agricultural Engineering Department, Faculty of Agriculture, University of Zagreb was supported by the following frameworks: Department of Agricultural Engineering, Faculty of Agriculture, University J.J. Strossmayer, Osijek; Department of Bio-systems Engineering, Faculty of Agriculture, University of Marib...

  19. Report for Working Group 1: Design Research in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Paradisi, Irene

    2013-01-01

    The first 2013 DCEE working group meeting focused on issues associated with design research in civil and environmental engineering. It addressed some of the motivation for establishing design as a research discipline in CEE and some of the challenges and outstanding questions about how to do so....

  20. A Systematic Review of Research on the Flipped Learning Method in Engineering Education

    Science.gov (United States)

    Karabulut-Ilgu, Aliye; Jaramillo Cherrez, Nadia; Jahren, Charles T.

    2018-01-01

    The purpose of this article is to describe the current state of knowledge and practice in the flipped learning approach in engineering education and to provide guidance for practitioners by critically appraising and summarizing existing research. This article is a qualitative synthesis of quantitative and qualitative research investigating the…

  1. Effects of Brief Integrated Information Literacy Education Sessions on Undergraduate Engineering Students' Interdisciplinary Research

    Science.gov (United States)

    Talikka, Marja; Soukka, Risto; Eskelinen, Harri

    2018-01-01

    Engineering students often conduct information searches without sufficient consideration of the context of their research topic. This article discusses how development of a new information literacy (IL) mindset through instruction in integrated IL education affects students' understanding of research problems and formulation of information search…

  2. Research on Channel Strategies of Modern Agricultural Engineering Demonstration Sites in Guangzhou

    OpenAIRE

    Wen-guang Liang; Chun Xie; Qian-qian Pang

    2015-01-01

    The research discusses the channel structure of modern agricultural engineering demonstration sites in Guangzhou. It analyzes the strategies of channel competition, personnel combination, transportation combination and terminal network construction. Enterprises adapt different marketing channel strategies on the basis of the type of the market. The research has made certain achievement and has certain guiding significance.

  3. Engineering and Technical Configuration Aspects of HIAPER, the new NSF/NCAR Research Aircraft

    Science.gov (United States)

    Friesen, R.; Laursen, K.

    2002-12-01

    The High-performance Instrumented Airborne Platform for Environmental Research, or HIAPER, is the new research aircraft presently being developed at the National Center for Atmospheric Research (NCAR) to serve the environmental research needs of the National Science Foundation (NSF) for the next several decades. The basic aircraft -- a Gulfstream V (G-V) business jet -- has been completed and will shortly undergo extensive modification to prepare it for future deployments in support of a variety of geosciences research missions. This presentation will focus on the many design and engineering considerations that have been made and are yet to come in converting a "green" business jet into a versatile research aircraft to serve the environmental research community. The project teams composed of engineers and scientists from NCAR and the scientific community at large are faced with trade offs involving costs of modifications, airframe structural integrity, aircraft performance (e.g. weight, drag), cabin environment, locations of inlet and sampling ports and FAA certification requirements. Many of the specific engineering specifications and modifications that have been made to date will be presented by way of engineering drawings, graphical depictions and actual photographs of the aircraft structure. Additionally, projected performance data of the modified-for-research aircraft will be presented along with some of the analyses performed to arrive at critical decisions (e.g. CFD airflow analysis). Finally, some of the details of the aircraft "infrastructure" such as signal and power wiring, generic cabin layout and data acquisition will be discussed.

  4. Tour Guide Robots: An Integrated Research and Design Platform to Prepare Engineering and Technology Students

    Science.gov (United States)

    Yelamarthi, Kumar

    2016-01-01

    Many interesting research and design questions occur at the intersections of traditional disciplines, yet most coursework and research programs for undergraduate engineering students are focused on one discipline. This leads to underutilization of the potential in better preparing students through multidisciplinary projects. Identifying this…

  5. An Experimental Evaluation of a Unified Checklist for Designing and Reporting Empirical Research in Software Engineering

    NARCIS (Netherlands)

    Condori-Fernandez, Nelly; Wieringa, Roelf J.; Daneva, Maia; Mutschler, B.B.; Pastor, Oscar

    2012-01-01

    This article reports on an experimental evaluation of a unified checklist for case study and experimental research. The checklist aims at exhibiting the underlying, shared, structure of observational and experimental research, and is based on several published checklist in software engineering and

  6. An Evaluation of a Course That Introduces Undergraduate Students to Authentic Aerospace Engineering Research

    Science.gov (United States)

    Mena, Irene B.; Schmitz, Sven; McLaughlin, Dennis

    2015-01-01

    This paper describes the implementation and assessment of an aerospace engineering course in which undergraduate students worked on research projects with graduate research mentors. The course was created using the principles from cooperative learning and project-based learning, and consisted of students working in small groups on a complex,…

  7. Various aspects of research of the SI engine with an additional expansion process

    Directory of Open Access Journals (Sweden)

    Noga Marcin

    2017-01-01

    Full Text Available The paper presents an analysis of the results of the both experimental results and theoretical works on the SI engine with additional expansion of exhaust gases, also known as five-stroke engine. The engine like this was constructed at Cracow University of Technology as a retrofitted in-line four cylinder engine in which outer cylinders (1st and 4th work as fired cylinders and inner cylinders (2nd and 3rd work as volume for the additional expansion. The aim of development of such an engine is to gain higher energy recovery ratio of the combusted fuel through the second expansion of exhaust in a separate cylinder. The operating parameters of the engine in various versions were analyzed: as naturally aspirated, supercharged using a turbocharger with a waste-gate valve and a turbocharger with variable nozzle turbine. Selected results of the indicating measurements of the engine with special emphasis on the indicated thermal efficiency were presented. The results pointed out the directions of further optimization of the engine. These results are all the more important, because according to the author’s knowledge, the research on the real object of this type are carried out in only one science center in the world besides Cracow University of Technology.

  8. Gas core nuclear thermal rocket engine research and development in the former USSR

    International Nuclear Information System (INIS)

    Koehlinger, M.W.; Bennett, R.G.; Motloch, C.G.; Gurfink, M.M.

    1992-09-01

    Beginning in 1957 and continuing into the mid 1970s, the USSR conducted an extensive investigation into the use of both solid and gas core nuclear thermal rocket engines for space missions. During this time the scientific and engineering. problems associated with the development of a solid core engine were resolved. At the same time research was undertaken on a gas core engine, and some of the basic engineering problems associated with the concept were investigated. At the conclusion of the program, the basic principles of the solid core concept were established. However, a prototype solid core engine was not built because no established mission required such an engine. For the gas core concept, some of the basic physical processes involved were studied both theoretically and experimentally. However, no simple method of conducting proof-of-principle tests in a neutron flux was devised. This report focuses primarily on the development of the. gas core concept in the former USSR. A variety of gas core engine system parameters and designs are presented, along with a summary discussion of the basic physical principles and limitations involved in their design. The parallel development of the solid core concept is briefly described to provide an overall perspective of the magnitude of the nuclear thermal propulsion program and a technical comparison with the gas core concept

  9. The laboratory test rig with miniature jet engine to research aviation fuels combustion process

    Directory of Open Access Journals (Sweden)

    Gawron Bartosz

    2015-12-01

    Full Text Available This article presents laboratory test rig with a miniature turbojet engine (MiniJETRig – Miniature Jet Engine Test Rig, that was built in the Air Force Institute of Technology. The test rig has been developed for research and development works aimed at modelling and investigating processes and phenomena occurring in full scale jet engines. In the article construction of a test rig is described, with a brief discussion on the functionality of each of its main components. Additionally examples of measurement results obtained during the realization of the initial tests have been included, presenting the capabilities of the test rig.

  10. FY2009 Annual Progress Report for Advanced Combustion Engine Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-12-01

    Fiscal Year 2009 Annual Progress Report for the Advanced Combustion Engine Research and Development (R&D) subprogram. The Advanced Combustion Engine R&D subprogram supports the mission of the VTP program by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that meet future Federal emissions regulations. Dramatically improving the efficiency of ICEs and enabling their introduction in conventional as well as hybrid electric vehicles is the most promising and cost-effective approach to increasing vehicle fuel economy over the next 30 years.

  11. Research and development needs for ITER engineering design

    International Nuclear Information System (INIS)

    Flanagan, C.; Alikaev, V.; Baker, C.

    1991-01-01

    In the series of documents that summarize the results of the Conceptual Design Activities (CDA) for the International Thermonuclear Experimental Reactor (ITER), this document describes the research and development (R and D) plans for 1991 - 1995. Part A describes the physics R and D, part B the technology R and D. The Physics R and D needs are presented in terms of task descriptions of an ITER-related R and D programme for 1991/1992 and beyond, while diagnostics R and D needs, although covered in Appendix A, are described in Part B. In Chapter II of Part A, ''ITER-related Physics R and D Needs for 91/92 and Beyond'', the following tasks are described as most crucial: (1) demonstration that (i) operation with a cold divertor plasma is possible, (ii) the peak heat flux onto the divertor plate can be kept below about 10 MW per square meter, (iii) and helium exhaust conditions allow a fractional burnup of about 3 percent or more; (2) a characterisation of disruptions that allows to specify their consequences for the plasma-facing-components, and that provides evidence that the number of disruptions expected allows acceptable plasma-facing-component lifetimes; (3) demonstration that steady-state operation in an enhanced-confinement regime and satisfactory plasma purity is possible, and provision of energy confinement scaling allowing the prediction of ITER performance; and (4) ensurance that the presence of a fast ion population does not jeopardize plasma performance in ITER. Part B, ''ITER Technology Research and Development Needs'', describes planning R and D for magnets, containment structure, assembly and maintenance, current drive and heating, plasma facing components, blanket, fuel cycle, structural materials, and diagnostics. A table of key milestones for Technology R and D is included, as well as cost estimates. Figs and tabs

  12. Are we studying what matters? Health priorities and NIH-funded biomedical engineering research.

    Science.gov (United States)

    Rubin, Jessica B; Paltiel, A David; Saltzman, W Mark

    2010-07-01

    With the founding of the National Institute of Biomedical Imaging and Bioengineering (NIBIB) in 1999, the National Institutes of Health (NIH) made explicit its dedication to expanding research in biomedical engineering. Ten years later, we sought to examine how closely federal funding for biomedical engineering aligns with U.S. health priorities. Using a publicly accessible database of research projects funded by the NIH in 2008, we identified 641 grants focused on biomedical engineering, 48% of which targeted specific diseases. Overall, we found that these disease-specific NIH-funded biomedical engineering research projects align with national health priorities, as quantified by three commonly utilized measures of disease burden: cause of death, disability-adjusted survival losses, and expenditures. However, we also found some illnesses (e.g., cancer and heart disease) for which the number of research projects funded deviated from our expectations, given their disease burden. Our findings suggest several possibilities for future studies that would serve to further inform the allocation of limited research dollars within the field of biomedical engineering.

  13. Undergraduate Research in Physics as a course for Engineering and Computer Science Majors

    Science.gov (United States)

    O'Brien, James; Rueckert, Franz; Sirokman, Greg

    2017-01-01

    Undergraduate research has become more and more integral to the functioning of higher educational institutions. At many institutions undergraduate research is conducted as capstone projects in the pure sciences, however, science faculty at some schools (including that of the authors) face the challenge of not having science majors. Even at these institutions, a select population of high achieving engineering students will often express a keen interest in conducting pure science research. Since a foray into science research provides the student the full exposure to the scientific method and scientific collaboration, the experience can be quite rewarding and beneficial to the development of the student as a professional. To this end, the authors have been working to find new contexts in which to offer research experiences to non- science majors, including a new undergraduate research class conducted by physics and chemistry faculty. An added benefit is that these courses are inherently interdisciplinary. Students in the engineering and computer science fields step into physics and chemistry labs to solve science problems, often invoking their own relevant expertise. In this paper we start by discussing the common themes and outcomes of the course. We then discuss three particular projects that were conducted with engineering students and focus on how the undergraduate research experience enhanced their already rigorous engineering curriculum.

  14. PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

    Science.gov (United States)

    Abu Bakar, Rosli

    2012-09-01

    The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our

  15. Applying system engineering methods to site characterization research for nuclear waste repositories

    International Nuclear Information System (INIS)

    Woods, T.W.

    1985-01-01

    Nuclear research and engineering projects can benefit from the use of system engineering methods. This paper is brief overview illustrating how system engineering methods could be applied in structuring a site characterization effort for a candidate nuclear waste repository. System engineering is simply an orderly process that has been widely used to transform a recognized need into a fully defined system. Such a system may be physical or abstract, natural or man-made, hardware or procedural, as is appropriate to the system's need or objective. It is a way of mentally visualizing all the constituent elements and their relationships necessary to fulfill a need, and doing so compliant with all constraining requirements attendant to that need. Such a system approach provides completeness, order, clarity, and direction. Admittedly, system engineering can be burdensome and inappropriate for those project objectives having simple and familiar solutions that are easily held and controlled mentally. However, some type of documented and structured approach is needed for those objectives that dictate extensive, unique, or complex programs, and/or creation of state-of-the-art machines and facilities. System engineering methods have been used extensively and successfully in these cases. The scientific methods has served well in ordering countless technical undertakings that address a specific question. Similarly, conventional construction and engineering job methods will continue to be quite adequate to organize routine building projects. Nuclear waste repository site characterization projects involve multiple complex research questions and regulatory requirements that interface with each other and with advanced engineering and subsurface construction techniques. There is little doubt that system engineering is an appropriate orchestrating process to structure such diverse elements into a cohesive, well defied project

  16. Challenges and Difficulties to Teaching Engineering to Generation Z: a case research

    Directory of Open Access Journals (Sweden)

    Suamit Correia Barreiro

    2017-08-01

    Full Text Available Many people from generation Z are at the beginning of their academic activities. This generation has peculiar characteristics that might be a challenge in the labor market. Thus, instructors have a great role in their preparation. However, professors might face difficulties dealing with their specific characteristics. The research aims to carry out a general survey to enable an understanding of the greater challenges and difficulties in teaching the subject of engineering to the students of Generation Z. The research method used was a case study at a University with 20 instructors from the Faculty of Engineering. The analysis revealed a great challenge in relating theoretical concepts with practical concepts. The research also showed a probable tendency of using more exhibition methods, and the low knowledge about generation Z by most instructors. This study seeks to contribute to the teaching-learning process of engineering.

  17. 11th International Conference on Software Engineering Research, Management and Applications

    CERN Document Server

    2014-01-01

    The purpose of the 11th International Conference on Software Engineering Research, Management and Applications (SERA 2013) held on August 7 - 9, 2012 in Prague, Czech Republic was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas and research results about all aspects (theory, applications and tools) of Software Engineering Research, Management and Applications, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.   The conference organizers selected 17 outstanding papers from those papers accepted for presentation at the conference in order to publish them in this volume.  The papers were chosen based on review scores submitted by members of the program committee, and further rigorous rounds of review.

  18. CenSSIS: the first year of an engineering research center for subsurface sensing and imaging

    Science.gov (United States)

    Silevitch, Michael B.

    2001-11-01

    Historically, the communities of engineers and scientists who image objects under the ground, under the ocean, inside the body, and inside the cell, have had relatively little contact, despite dealing with similar issues and often using similar mathematical models and algorithms. CenSSIS, the Center for Subsurface Sensing and Imaging Systems, is an NSF Engineering Research Center, developed to bring these seemingly disparate fields together. Conceived at Northeastern University, the Center now has four university partners, four affiliates, and a growing number of corporate and government sponsors. CenSSIS was established to solve real--world problems in these and other fields, to spark revolutionary advances by developing a unified framework for subsurface sensing and imaging systems, and to immerse students and researchers in a multi--disciplinary teaching and learning environment. Already this effort has begun to bear fruit. Here we report on the first full year of activity as an Engineering Research Center.

  19. Experimental Research in Operation Management in Engine Room by using Language Sentiment/Opinion Analysis

    Directory of Open Access Journals (Sweden)

    Dimitris Papachristos

    2014-12-01

    Full Text Available The paper argues for the necessity of a combination MMR methods (questionnaire, interview and sentiment/opinion techniques to personal satisfaction analysis at the maritime and training education and proposes a generic, but practical research approach for this purpose. The proposed approach concerns the personal satisfaction evaluation of Engine Room simulator systems and combines the speech recording (sentiment/opinion analysis for measuring emotional user responses with usability testing (SUS tool. The experimental procedure presented here is a primary effort to research the emotion analysis (satisfaction of the users-students in Engine Room Simulators. Finally, the ultimate goal of this research is to find and test the critical factors that influence the educational practice and user’s satisfaction of Engine Room Simulator Systems and the ability to conduct full-time system control by the marine crew.

  20. Guidelines for conducting and reporting case study research in software engineering

    OpenAIRE

    Runeson, Per; Höst, Martin

    2009-01-01

    Case study is a suitable research methodology for software engineering research since it studies contemporary phenomena in its natural context. However, the understanding of what constitutes a case study varies, and hence the quality of the resulting studies. This paper aims at providing an introduction to case study methodology and guidelines for researchers conducting case studies and readers studying reports of such studies. The content is based on the authors’ own experience from condu...

  1. The history and evolution of optically accessible research engines and their impact on our understanding of engine combustion

    Energy Technology Data Exchange (ETDEWEB)

    Miles, Paul C. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2015-03-01

    The development and application of optically accessible engines to further our understanding of in-cylinder combustion processes is reviewed, spanning early efforts in simplified engines to the more recent development of high-pressure, high-speed engines that retain the geometric complexities of modern production engines. Limitations of these engines with respect to the reproduction of realistic metal test engine characteristics and performance are identified, as well as methods that have been used to overcome these limitations. Finally, the role of the work performed in these engines on clarifying the fundamental physical processes governing the combustion process and on laying the foundation for predictive engine simulation is summarized.

  2. 9th International Conference on Software Engineering Research, Management and Applications(SERA 2011)

    CERN Document Server

    Software Engineering Research, Management and Applications 2011

    2012-01-01

    The purpose of the 9th International Conference on Software Engineering Research, Management and Applications(SERA 2011) held on August 10-12, 2011 in Baltimore, Maryland was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas and research results about all aspects (theory, applications and tools) of computer and information sciences, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.   The conference organizers selected 12 outstanding papers from SERA 2011, all of which you will find in this volume of Springer’s Studies in Computational Intelligence.

  3. Recent trends in superalloys research for critical aero-engine components

    Energy Technology Data Exchange (ETDEWEB)

    Remy, Luc [Mine ParisTech, CNRS UMR 7633, 91 - Evry (France). Centre des Materiaux; Guedou, Jean-Yves [Snecma Safran Group, Moissy-Cramayel (France). Materials and Processes Dept.

    2010-07-01

    This paper is a brief survey of common research activity on superalloys for aero-engines between Snecma and Mines ParisTech Centre des Materiaux during recent years. First in disks applications, the development of new powder metallurgy superalloys is shown. Then grain boundary engineering is investigated in a wrought superalloy. Secondly, design oriented research on single crystals blades is shown: a damage model for low cycle fatigue is used for life prediction when cracks initiated at casting pores. The methodology developed for assessing coating life is illustrated for thermal barrier coating deposited on AMI single crystal superalloy. (orig.)

  4. Engineering and Ecological Constraction and Mechanization, National Research University Moscow State University of Civil Engineering

    Directory of Open Access Journals (Sweden)

    Владимир Александрович Величкин

    2016-11-01

    Full Text Available The noise in the construction of an important factor. It can interfere with the transmission of information through communication channels, especially if the signals of low power and information to be transmitted over a long distance. Thus, the noise would be a great hindrance in the field of automation facilities, where no transmission of information on large and small distance not oboytis.Analiticheskoe study durations of noise emissions rather difficult. Rice was an approximate distribution of the duration of the intervals between the moments of crossing the zero level noise. Later, it has been proposed as solutions to approximate sufficiently high urovney.Pervye experimental data on the distribution of time intervals between zeros in normal noise were obtained by Campbell [1] .Nedavno published his research Bletekier [2], we obtain the distribution of noise emission duration, passed through a filter with a band transmittance 440 -10 250 MCPA levels from 0 to 1.69 .In this article made a complete study and results are provided.

  5. Research Capabilities Directed to all Electric Engineering Teachers, from an Alternative Energy Model

    Directory of Open Access Journals (Sweden)

    Víctor Hugo Ordóñez Navea

    2017-08-01

    Full Text Available The purpose of this work was to contemplate research capabilities directed to all electric engineering teachers from an alternative energy model intro the explanation of a semiconductor in the National Training Program in Electricity. Some authors, such as. Vidal (2016, Atencio (2014 y Camilo (2012 point out to technological applications with semiconductor electrical devices. In this way; a diagnostic phase is presented, held on this field research as a descriptive type about: a how to identify the necessities of alternative energies, and b The research competences in the alternatives energies of researcher from a solar cell model, to boost and innovate the academic praxis and technologic ingenuity. Themselves was applied a survey for a group of 15 teachers in the National Program of Formation in electricity to diagnose the deficiencies in the research area of alternatives energies. The process of data analysis was carried out through descriptive statistic. Later the conclusions are presented the need to generate strategies for stimulate and propose exploration of alternatives energies to the development of research competences directed to the teachers of electrical engineering for develop the research competences in the enforcement of the teachers exercise for the electric engineering, from an alternative energy model and boost the technologic research in the renewal energies field.

  6. Human Performance and Biosystems

    Science.gov (United States)

    2013-03-08

    cognitive functions, bio-molecular repair and bio- resiliency Bioenergy: • Portable H2 Fuel Generated from H2O or Cellulose : - Cheap, self...changes in molecular conformations Finger- print region Raman Rationale: Biological response to resonance-type effects from THz may have unique...model for the 3D nanostructured surface  Identifying candidates for the first enzyme-channeling pair or triad to be tested in the surface

  7. The outline report of advanced basic engineering research in the fiscal year 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The JNC has initiated the cooperation with universities and research institutes for advanced basic engineering on 1995. The number of research cooperation theme is increasing and satisfactorily improving in the forth year, 1998. The objective of this program is to promote the advanced basic engineering research with universities and research institutes in relation with the JNC's projects. The facilities and equipment of the JNC are mainly provided to the cooperation. The JNC has settled the research cooperation themes. The universities and research institute have applied to the themes with their issues, working plans and personnel. The JNC has selected the issues and personnel, and put into practice the cooperation with accepting guest staffs and/or research fellows from the universities. This report summarizes the results of the advanced basic engineering research cooperation executed in the fiscal year, 1998. The total number of issues is 34 for the 29 themes; those are categorized in to two groups. The one is related to the fast breeder reactor technologies and the other is on the environmental technologies. The 12 issues are finished in the fiscal year, 1998, in which the 9 issues are for the fast breeder reactor technologies and the 3 issues are for the environmental technologies. The themes/the issues, the host group, host key persons, university side key persons, a form of cooperation are summarized in the tables. The summary reports of research activities by the all cooperators are presented under the particular format. Those describe the total schedule, a form of cooperation, the research objective, the outline of research contents, main facilities for using, research status, research results, future schedules and bibliographies relevant to the research cooperation. The 25 tables and 158 figures are included. (Y. Tanaka)

  8. The outline report of advanced basic engineering research in the fiscal year 1998

    International Nuclear Information System (INIS)

    1999-08-01

    The JNC has initiated the cooperation with universities and research institutes for advanced basic engineering on 1995. The number of research cooperation theme is increasing and satisfactorily improving in the forth year, 1998. The objective of this program is to promote the advanced basic engineering research with universities and research institutes in relation with the JNC's projects. The facilities and equipment of the JNC are mainly provided to the cooperation. The JNC has settled the research cooperation themes. The universities and research institute have applied to the themes with their issues, working plans and personnel. The JNC has selected the issues and personnel, and put into practice the cooperation with accepting guest staffs and/or research fellows from the universities. This report summarizes the results of the advanced basic engineering research cooperation executed in the fiscal year, 1998. The total number of issues is 34 for the 29 themes; those are categorized in to two groups. The one is related to the fast breeder reactor technologies and the other is on the environmental technologies. The 12 issues are finished in the fiscal year, 1998, in which the 9 issues are for the fast breeder reactor technologies and the 3 issues are for the environmental technologies. The themes/the issues, the host group, host key persons, university side key persons, a form of cooperation are summarized in the tables. The summary reports of research activities by the all cooperators are presented under the particular format. Those describe the total schedule, a form of cooperation, the research objective, the outline of research contents, main facilities for using, research status, research results, future schedules and bibliographies relevant to the research cooperation. The 25 tables and 158 figures are included. (Y. Tanaka)

  9. On founding of the science and technology intelligence (STI) research system for the grand engineering research organization

    International Nuclear Information System (INIS)

    Li Zhimin; Tang Yong; Shi Yi; Wang Yirong

    2010-01-01

    This article discusses the science and technology intelligence (STI) research system for grand engineering research organization, and pose that this system should be composed of five elements of research category, research form, service patterns , quality control and fruit evaluation and precession with ability, and describes its definition, connotation and function for each element. research category includes strategy intelligence, technology route and develop trend, technology detail; research form has dynamic track, investigation and analysis, consult study; service patterns involve demand or induction service, independence or mutual action service; quality control and fruit evaluation should be conducted by a group of technologist and intelligence expert; precession with ability should be an organized system with good configuration and learning ability. (authors)

  10. Outline of scientific and research activities of the Faculty of Nuclear Science and Physical Engineering

    International Nuclear Information System (INIS)

    Loncar, G.

    1982-01-01

    A survey is presented of scientific and research activities carried out in the departments of the Faculty of Nuclear Science and Physical Engineering of the Czech Technical University in Prague. The first section lists the principal results achieved in the course of the 6th Five-Year Plan in Physical Electronics, Solid State Engineering, Materials Structure and Properties, Nuclear Physics, Theory and Technology of Nuclear Reactors, Dosimetry and Application of Ionizing Radiation and Nuclear Chemistry. The second part gives a summary of scientific and research work carried out in the Faculty of Nuclear Science and Physical Engineering in the 7th Five-Year Plan in all branches of science represented. The Faculty's achievements in international scientific cooperation are assessed. (author)

  11. [Metrology research on biomedical engineering publications from China in recent years].

    Science.gov (United States)

    Yu, Lu; Su, Juan; Wang, Ying; Sha, Xianzheng

    2014-12-01

    The present paper is to evaluate the scientific research level and development trends of biomedical engineering in China using metrology analysis on Chinese biomedical engineering scientific literatures. Pubmed is used to search the biomedical engineering publications in recent 5 years which are indexed by Science Citation Index, and the number and cited times of these publications and the impact factor of the journals are analyzed. The results show that comparing with the world, although the number of the publication in China has increased in recent 5 years, there is still much room for improvement. Among Chinese mainland, Hongkong and Taiwan, Chinese mainland maintains the obvious advantage in this subject, but Hongkong has the highest average cited number. Shanghai and Beijing have better research ability than other areas in Chinese mainland.

  12. The Need for Cyber-Informed Engineering Expertise for Nuclear Research Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Robert Stephen [Idaho National Laboratory

    2015-12-01

    Engineering disciplines may not currently understand or fully embrace cyber security aspects as they apply towards analysis, design, operation, and maintenance of nuclear research reactors. Research reactors include a wide range of diverse co-located facilities and designs necessary to meet specific operational research objectives. Because of the nature of research reactors (reduced thermal energy and fission product inventory), hazards and risks may not have received the same scrutiny as normally associated with power reactors. Similarly, security may not have been emphasized either. However, the lack of sound cybersecurity defenses may lead to both safety and security impacts. Risk management methodologies may not contain the foundational assumptions required to address the intelligent adversary’s capabilities in malevolent cyber attacks. Although most research reactors are old and may not have the same digital footprint as newer facilities, any digital instrument and control function must be considered as a potential attack platform that can lead to sabotage or theft of nuclear material, especially for some research reactors that store highly enriched uranium. This paper will provide a discussion about the need for cyber-informed engineering practices that include the entire engineering lifecycle. Cyber-informed engineering as referenced in this paper is the inclusion of cybersecurity aspects into the engineering process. A discussion will consider several attributes of this process evaluating the long-term goal of developing additional cyber safety basis analysis and trust principles. With a culture of free information sharing exchanges, and potentially a lack of security expertise, new risk analysis and design methodologies need to be developed to address this rapidly evolving (cyber) threatscape.

  13. Identifying and Investigating Difficult Concepts in Engineering Mechanics and Electric Circuits. Research Brief

    Science.gov (United States)

    Streveler, Ruth; Geist, Monica; Ammerman, Ravel; Sulzbach, Candace; Miller, Ronald; Olds, Barbara; Nelson, Mary

    2007-01-01

    This study extends ongoing work to identify difficult concepts in thermal and transport science and measure students' understanding of those concepts via a concept inventory. Two research questions provided the focal point: "What important concepts in electric circuits and engineering mechanics do students find difficult to learn?" and…

  14. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 9

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-03-01

    140 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  15. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 8

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-03-01

    141 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  16. On Integrating Student Empirical Software Engineering Studies with Research and Teaching Goals

    NARCIS (Netherlands)

    Galster, Matthias; Tofan, Dan; Avgeriou, Paris

    2012-01-01

    Background: Many empirical software engineering studies use students as subjects and are conducted as part of university courses. Aim: We aim at reporting our experiences with using guidelines for integrating empirical studies with our research and teaching goals. Method: We document our experience

  17. Education and Research Related to Organic Waste Management at Agricultural Engineering Schools

    Science.gov (United States)

    Soliva, Montserrat; Bernat, Carles; Gil, Emilio; Martinez, Xavier; Pujol, Miquel; Sabate, Josep; Valero, Jordi

    2007-01-01

    Purpose: The purpose of this paper is to describe the experience of the Agriculture Engineering School of Barcelona (ESAB), where undergraduate students were involved in field research experiments on organic waste use in agricultural systems. Design/methodology/approach: The paper outlines how the formation of professionals oriented to work for…

  18. Learning to Become Graduate Students: Japanese Women's Experience in the Research Unit in Engineering

    Science.gov (United States)

    Hosaka, Masako

    2010-01-01

    Based on the analysis of 16 interviews with women first-year master's students at two national engineering schools in Japan, this article examines the socialisation role of compulsory undergraduate research experience in Japanese women's decisions to pursue graduate education and choices of the programme. The findings suggest that research…

  19. Use of Research-Based Instructional Strategies in Core Chemical Engineering Courses

    Science.gov (United States)

    Prince, Michael; Borrego, Maura; Henderson, Charles; Cutler, Stephanie; Froyd, Jeff

    2013-01-01

    Traditional lecturing remains the most prevalent mode of instruction despite overwhelming research showing the increased effectiveness of many alternate instructional strategies. This study examines chemical engineering instructors' awareness and use of 12 such instructional strategies. The study also examines how chemical engineering…

  20. Fundamental Research in Engineering Education. Student Learning in Industrially Situated Virtual Laboratories

    Science.gov (United States)

    Koretsky, Milo D.; Kelly, Christine; Gummer, Edith

    2011-01-01

    The instructional design and the corresponding research on student learning of two virtual laboratories that provide an engineering task situated in an industrial context are described. In this problem-based learning environment, data are generated dynamically based on each student team's distinct choices of reactor parameters and measurements.…

  1. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 3

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-03-01

    137 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  2. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 2

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-02-01

    132 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  3. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 7

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-03-01

    139 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  4. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 5

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-03-01

    133 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  5. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 6

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-03-01

    135 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  6. Development of Chemical Engineering Course Methods Using Action Research: Case Study

    Science.gov (United States)

    Virkki-Hatakka, Terhi; Tuunila, Ritva; Nurkka, Niina

    2013-01-01

    This paper reports on the systematic development of a teaching methodology for two chemical engineering courses. The aim was to improve the quality of teaching to achieve expected learning outcomes more effectively. The development was carried out over a period of several years based on an action research methodology with data systematically…

  7. Communicology, Engineering in Social Communication and family. General notes of a research proposal

    Directory of Open Access Journals (Sweden)

    Jesús Galindo

    2014-11-01

    Full Text Available A sketch of the research project Engineering in Social Communication and Family, part of the overall research program on Engineering and Social Communicology is presented. The note focuses on the main conceptual resources used from Communicology, a methodological program note based on life stories and discourse analysis. Also an analytical note on the first results of the first phase of the overall inquiry is presented. The research project started in 2010 will finish its first phase in 2014. The general proposal is to point out that it is possible to identify general setting profiles of communication between partners and family in synthetic models of family types. With this will be possible to construct Communiconomy schemes for intervention in family historical developments from a Social Communication Engineering perspective, identifying the main problems of communication in relationships and families, and their solutions, from the point of view of Communicology, Communiconomy and Social Engineering in Communication. The research focuses on the relationships of middle class families in southern Mexico City in the last sixty years.

  8. Title list of selected Soviet reports in the fields of nuclear research and nuclear engineering. 10

    International Nuclear Information System (INIS)

    Schumann, G.; Sube, R.

    1979-07-01

    142 titles of reports issued by Soviet institutes (KFTI, EFI, IAE, IFVE, ITEF, NIIAR, NIIEFA, FEI, RI, SFTI) in the fields of nuclear research and nuclear engineering have been arranged according to the INIS subject scope. The reports are available on a loan basis from ZfK Rossendorf, Information Department, Dresden

  9. Computational fluid dynamics simulation of a single cylinder research engine working with biodiesel

    Directory of Open Access Journals (Sweden)

    Moldovanu Dan

    2013-01-01

    Full Text Available The main objective of the paper is to present the results of the CFD simulation of a DI single cylinder engine using diesel, biodiesel, or different mixture proportions of diesel and biodiesel and compare the results to a test bed measurement in the same functioning point. The engine used for verifying the results of the simulation is a single cylinder research engine from AVL with an open ECU, so that the injection timings and quantities can be controlled and analyzed. In Romania, until the year 2020 all the fuel stations are obliged to have mixtures of at least 10% biodiesel in diesel [14]. The main advantages using mixtures of biofuels in diesel are: the fact that biodiesel is not harmful to the environment; in order to use biodiesel in your engine no modifications are required; the price of biodiesel is smaller than diesel and also if we compare biodiesel production to the classic petroleum based diesel production, it is more energy efficient; biodiesel assures more lubrication to the engine so the life of the engine is increased; biodiesel is a sustainable fuel; using biodiesel helps maintain the environment and it keeps the people more healthy [1-3].

  10. The Barrett Foundation: Undergraduate Research Program for Environmental Engineers and Scientists

    Science.gov (United States)

    Rizzo, D. M.; Paul, M.; Farmer, C.; Larson, P.; Matt, J.; Sentoff, K.; Vazquez-Spickers, I.; Pearce, A. R.

    2007-12-01

    A new program sponsored by The Barrett Foundation in the University of Vermont College of Engineering and Mathematical Sciences (UVM) supports undergraduate students in Environmental Engineering, Earth and Environmental Sciences to pursue independent summer research projects. The Barrett Foundation, a non-profit organization started by a UVM Engineering alum, provided a grant to support undergraduate research. Students must work with at least two different faculty advisors to develop project ideas, then independently prepare a research proposal and submit it to a faculty panel for review. The program was structured as a scholarship to foster a competitive application process. In the last three years, fourteen students have participated in the program. The 2007 Barrett Scholars projects include: - Using bacteria to change the chemistry of subsurface media to encourage calcite precipitation for soil stability and pollutant sequestration - Assessing structural weaknesses in a historic post and beam barn using accelerometers and wireless data collection equipment - Using image processing filters to 1) evaluate leaf wetness, a leading indicator of disease in crops and 2) assess the movement of contaminants through building materials. - Investigating the impact of increased water temperature on cold-water fish species in two Vermont streams. - Studying the impacts of light duty vehicle tailpipe emissions on air quality This program supports applied and interdisciplinary environmental research and introduces students to real- world engineering problems. In addition, faculty from different research focuses are presented the opportunity to establish new collaborations around campus through the interdisciplinary projects. To date, there is a successful publication record from the projects involving the Barrett scholars, including students as authors. One of the objectives of this program was to provide prestigious, competitive awards to outstanding undergraduate engineers

  11. PREFACE: 3rd International Conference of Mechanical Engineering Research (ICMER 2015)

    Science.gov (United States)

    Mamat, Riazalman; Rahman, Mustafizur; Mohd. Zuki Nik Mohamed, Nik; Che Ghani, Saiful Anwar; Harun, Wan Sharuzi Wan

    2015-12-01

    The 3rd ICMER2015 is the continuity of the NCMER2010. The year 2010 represents a significant milestone in the history for Faculty of Mechanical Engineering, Universiti Malaysia Pahang (UMP) Malaysia with the organization of the first and second national level conferences (1st and 2nd NCMER) at UMP on May 26-27 and Dec 3-4 2010. The Faculty then changed the name from National Conference on Mechanical Engineering Research (NCMER) to International Conference on Mechanical Engineering Research (ICMER) in 2011 and this year, 2015 is our 3rd ICMER. These proceedings contain the selected scientific manuscripts submitted to the conference. It is with great pleasure to welcome you to the "International Conference on Mechanical Engineering Research (ICMER2015)" that is held at Zenith Hotel, Kuantan, Malaysia. The call for papers attracted submissions of over two hundred abstracts from twelve different countries including Japan, Iran, China, Kuwait, Indonesia, Norway, Philippines, Morocco, Germany, UAE and more. The scientific papers published in these proceedings have been revised and approved by the technical committee of the 3rd ICMER2015. All of the papers exhibit clear, concise, and precise expositions that appeal to a broad international readership interested in mechanical engineering, combustion, metallurgy, materials science as well as in manufacturing and biomechanics. The reports present original ideas or results of general significance supported by clear reasoning and compelling evidence, and employ methods, theories and practices relevant to the research. The authors clearly state the questions and the significance of their research to theory and practice, describe how the research contributes to new knowledge, and provide tables and figures that meaningfully add to the narrative. In this edition of ICMER representatives attending are from academia, industry, governmental and private sectors. The plenary and invited speakers will present, discuss, promote and

  12. Selective methods for the maintainability and standardization of the engineering of a research reactor

    International Nuclear Information System (INIS)

    Rico, N.

    1999-01-01

    Full text: The main point of this work consists of a selective method for the engineering of a research reactor based on parameters, which determine a safer design, installation, operation and maintenance. The variety of tasks in a research reactor are: research, development, production of radioisotopes, etc. They are developed within the installation and the different specialties gathered for these activities. It is necessary to count on an intrinsically safe environment, from the point of view of the investigator, the operator and the maintenance personnel. In general, in both nuclear and conventional installation, independent of its size, certain investment necessities prevail, starting from its design, such as: Nuclear Security, Engineering, Versatility, Production (both for investigation and development)), Conventional Security and Physical Protection, Profitability, etc. The concepts which help us accentuate a greater benefit for the research are not found within these parameters, purpose for which this facility was created. When obtaining a simple engineering the results show an increase in security, decrease in maintenance and operative costs, less ageing and an easy operation. The plant engineering of research reactors could be titled, from the engineering and maintenance point of view, as a technological chaos. Not only for its aspect but for its physiognomy too: inaccessible to certain areas; impassable in its circulation aisles; hard to check and measure; disassemble; clean its components; thus increasing unnecessarily the personnel's exposure time. The facilities of research reactors have different disciplines used as rules for the development of the design, such as nuclear, mechanical, thermodynamical, electronic, chemical, electrical, etc. Common guide lines - from design to operation - are non-existent. This is why different manufacturers and models are found within instruments, pumps, electrical engines, illumination, etc. even when they perform

  13. Overview of the 1985 NASA Lewis Research Center SP-100 free-piston stirling engine activities

    International Nuclear Information System (INIS)

    Slaby, J.G.

    1985-01-01

    An overview of the 1985 (NASA) Lewis Research Center free-piston Stirling engine activities in support of the SP-100 Program is presented. The SP-100 program is being conducted in support of the Department of Advanced Research Projects Agency (DARPA) and the Department of Energy (DOE), and NASA. This effort is keyed on the design, fabrication, assembly, and testing of a 25 kW /SUB e/ Stirling space-power technology-feasibility demonstrator engine. Another facet of the SP-100 project covers the status of a 9000-hr goal endurance test conducted on a 2 kW /SUB e/ free-piston Stirling/ linear alternator system employing hydrostatic gas bearings. Dynamic balancing of the RE-1000 engine (a 1 kW /SUB e/ free-piston Stirling engine) using a passive dynamic absorber will be discussed along with the results of a parametric study showing the relationships of Stirling power converter specific weight and efficiency as functions of Stirling engine heater to cooler temperature ratio. Planned tests will be described covering a hydrodynamic gas bearing concept for potential SP-100 application

  14. Geo-engineering, Governance, and Social-Ecological Systems: Critical Issues and Joint Research Needs

    Directory of Open Access Journals (Sweden)

    Victor Galaz

    2012-03-01

    Full Text Available The debate about the possibilities to engineer the Earth's climate has changed drastically in the last years. Suggestions of large-scale technological interventions to combat climate change that a decade ago would have been discarded as science fiction are slowly moving into the center of international climate change discussions, research, and politics. In this article, I elaborate three joint key challenges to geo-engineering research from a resilience perspective, with a special emphasis on governance issues. First, I discuss the need to understand geo-engineering proposals from a "planetary boundaries" perspective. Second, I elaborate why the notion of Earth stewardship and geo-engineering are not necessarily in conflict, but instead could be viewed as complementary approaches. Last, I discuss the critical need to explore an institutional setting that is strong enough to weed out geo-engineering proposals that carry considerable ecological risk, but still allow for novelty, fail-safe experimentation, and continuous learning. These issues are critical for our understanding of how to effectively govern global environmental risks, complex systems, and emerging technologies in the Anthropocene.

  15. Applications of Systems Engineering to the Research, Design, and Development of Wind Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Dykes, K.; Meadows, R.; Felker, F.; Graf, P.; Hand, M.; Lunacek, M.; Michalakes, J.; Moriarty, P.; Musial, W.; Veers, P.

    2011-12-01

    This paper surveys the landscape of systems engineering methods and current wind modeling capabilities to assess the potential for development of a systems engineering to wind energy research, design, and development. Wind energy has evolved from a small industry in a few countries to a large international industry involving major organizations in the manufacturing, development, and utility sectors. Along with this growth, significant technology innovation has led to larger turbines with lower associated costs of energy and ever more complex designs for all major subsystems - from the rotor, hub, and tower to the drivetrain, electronics, and controls. However, as large-scale deployment of the technology continues and its contribution to electricity generation becomes more prominent, so have the expectations of the technology in terms of performance and cost. For the industry to become a sustainable source of electricity, innovation in wind energy technology must continue to improve performance and lower the cost of energy while supporting seamless integration of wind generation into the electric grid without significant negative impacts on local communities and environments. At the same time, issues associated with wind energy research, design, and development are noticeably increasing in complexity. The industry would benefit from an integrated approach that simultaneously addresses turbine design, plant design and development, grid interaction and operation, and mitigation of adverse community and environmental impacts. These activities must be integrated in order to meet this diverse set of goals while recognizing trade-offs that exist between them. While potential exists today to integrate across different domains within the wind energy system design process, organizational barriers such as different institutional objectives and the importance of proprietary information have previously limited a system level approach to wind energy research, design, and

  16. Report of The Science and Engineering Research Council for the year 1989-90

    International Nuclear Information System (INIS)

    1990-01-01

    This twenty-fifth anniversary issue of the Science and Engineering Research Council's (SERC) Annual Report opens by reemphasizing the continuing need to plan research expenditure on a greater than annual basis. Exciting developments in every branch and discipline continue to emerge. This year has seen advances in public relations for SERC with the plans for a science centre on the Royal Observatory, Edinburgh site, and a national essay competition for school children. (UK)

  17. Usability Evaluation of NLP-PIER: A Clinical Document Search Engine for Researchers.

    Science.gov (United States)

    Hultman, Gretchen; McEwan, Reed; Pakhomov, Serguei; Lindemann, Elizabeth; Skube, Steven; Melton, Genevieve B

    2017-01-01

    NLP-PIER (Natural Language Processing - Patient Information Extraction for Research) is a self-service platform with a search engine for clinical researchers to perform natural language processing (NLP) queries using clinical notes. We conducted user-centered testing of NLP-PIER's usability to inform future design decisions. Quantitative and qualitative data were analyzed. Our findings will be used to improve the usability of NLP-PIER.

  18. Research in progress and other activities of the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1993-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics and computer science during the period April 1, 1993 through September 30, 1993. The major categories of the current ICASE research program are: (1) applied and numerical mathematics, including numerical analysis and algorithm development; (2) theoretical and computational research in fluid mechanics in selected areas of interest to LaRC, including acoustic and combustion; (3) experimental research in transition and turbulence and aerodynamics involving LaRC facilities and scientists; and (4) computer science.

  19. Role of the chemical engineering technician in applied research related to tritium separation from aqueous effluents

    International Nuclear Information System (INIS)

    Nelson, S.D.

    1978-01-01

    Applied research and development activities related to the removal of tritium from aqueous effluent streams have presented broad opportunities to the chemical engineering technician for professional growth. Technician job activities involve operating complex analytical instrumentation and constructing, maintaining, and operating experimental electrolysis apparatus. The technician is a member of a professional team including scientific, engineering, and other technical personnel and as such is expected to exercise creative thought. Proximity of a large university and availability of formalized ''in house'' training courses provide incentives for technicians to broaden their academic base concurrent with their work involvement

  20. Report of the Science and Engineering Research Council for the year 1987-88

    International Nuclear Information System (INIS)

    1988-12-01

    The paper presents the Annual Report of the Science and Engineering Research Council (SERC), United Kingdom 1987/8. The contents contains the reports of the four Boards of the Council - the Astronomy and Planetary Science Board, the Engineering Board, the Nuclear Physics Board and the Science Board. The SERC report also contains eleven review articles on major advances in Science in recent years, including high temperature superconductivity and the supernova in the Large Magellanic Cloud, as well as details of fourteen ''highlights'' of 1987/8 including the dating of the Turin Shroud. (U.K.)

  1. Exploring a Science Teacher's Uncertainty with Integrating Engineering Design: An Action Research Study

    Science.gov (United States)

    Capobianco, Brenda M.

    2011-11-01

    This study examines a fifth grade science teacher's attempts at integrating engineering design using the construct of uncertainty. Collaborative action research served as a supportive mechanism to uncover and confront the teacher's uncertainties. Data were gathered through semi-structured interviews, reflections, classroom observations, lesson plans, and student work. Data analysis entailed the use of grounded theory. Findings from this study revealed that teaching science through engineering design is both challenging and problematic. Underpinning the teacher's pedagogical experiences was the constant force of uncertainty, in various forms, and how her sense of doubt was beneficial rather than problematic.

  2. Results and future plans for the innovative basic research on high temperature engineering

    International Nuclear Information System (INIS)

    2001-05-01

    The High Temperature Engineering Test Reactor (HTTR) is under the rise-to-power stage at the Oarai Research Establishment of Japan Atomic Energy Research Institute (JAERI). This reactor is aimed not only at establishment of the infrastructural technology on high temperature gas-cooled reactor and its upgrading, but also at promotion of the innovative basic research on high temperature engineering. The research is a series of innovative high-temperature irradiation studies, making the best use of the characteristic of the HTTR that it provides a very wide irradiation space at high temperatures. The JAERI has been conducting preliminary tests of the innovative research since 1994, in collaboration with universities and other research institutes, in the fields of 1) new materials development, 2) high temperature radiation chemistry and fusion-related research, and 3) high temperature irradiation techniques and other nuclear research. The HTTR Utilization Research Committee has been examining the results and methodology of the preliminary tests and the future plans, as well as examining the preparatory arrangements of facilities for the HTTR irradiation and post-irradiation examinations. This report presents a summary of results of the preliminary tests and preparatory arrangements for about seven years, together with an outline of the future plans. (author)

  3. Research Needs and Impacts in Predictive Simulation for Internal Combustion Engines (PreSICE)

    Energy Technology Data Exchange (ETDEWEB)

    Eckerle, Wayne [Cummins, Inc., Columbus, IN (United States); Rutland, Chris [Univ. of Wisconsin, Madison, WI (United States); Rohlfing, Eric [Dept. of Energy (DOE), Washington DC (United States). Office of Science; Singh, Gurpreet [Dept. of Energy (DOE), Washington DC (United States). Office of Energy Efficiency and Renewable Energy; McIlroy, Andrew [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2011-03-03

    This report is based on a SC/EERE Workshop to Identify Research Needs and Impacts in Predictive Simulation for Internal Combustion Engines (PreSICE), held March 3, 2011, to determine strategic focus areas that will accelerate innovation in engine design to meet national goals in transportation efficiency. The U.S. has reached a pivotal moment when pressures of energy security, climate change, and economic competitiveness converge. Oil prices remain volatile and have exceeded $100 per barrel twice in five years. At these prices, the U.S. spends $1 billion per day on imported oil to meet our energy demands. Because the transportation sector accounts for two-thirds of our petroleum use, energy security is deeply entangled with our transportation needs. At the same time, transportation produces one-quarter of the nation’s carbon dioxide output. Increasing the efficiency of internal combustion engines is a technologically proven and cost-effective approach to dramatically improving the fuel economy of the nation’s fleet of vehicles in the near- to mid-term, with the corresponding benefits of reducing our dependence on foreign oil and reducing carbon emissions. Because of their relatively low cost, high performance, and ability to utilize renewable fuels, internal combustion engines—including those in hybrid vehicles—will continue to be critical to our transportation infrastructure for decades. Achievable advances in engine technology can improve the fuel economy of automobiles by over 50% and trucks by over 30%. Achieving these goals will require the transportation sector to compress its product development cycle for cleaner, more efficient engine technologies by 50% while simultaneously exploring innovative design space. Concurrently, fuels will also be evolving, adding another layer of complexity and further highlighting the need for efficient product development cycles. Current design processes, using “build and test” prototype engineering, will not

  4. Research: Exploring the Parameters of Home Economics.

    Science.gov (United States)

    Badir, Doris R.

    1991-01-01

    This contextual model for home economics filters aspects of daily life (food, clothing, shelter, finances, and relationships) through the contexts of family ecosystems, human development, values, and environmental issues (biosystems, technology, and social systems) as a basis for research, theory, and practice. (SK)

  5. Earthquake engineering and structural dynamics studies at Bhabha Atomic Research Centre

    International Nuclear Information System (INIS)

    Reddy, G.R.; Parulekar, Y.M.; Sharma, A.; Dubey, P.N.; Vaity, K.N.; Kukreja, Mukhesh; Vaze, K.K.; Ghosh, A.K.; Kushwaha, H.S.

    2007-01-01

    Earthquake Engineering and structural Dynamics has gained the attention of many researchers throughout the world and extensive research work is performed. Linear behaviour of structures, systems and components (SSCs) subjected to earthquake/dynamic loading is clearly understood. However, nonlinear behaviour of SSCs subjected to earthquake/dynamic loading need to be understood clearly and design methods need to be validated experimentally. In view of this, three major areas in earthquake engineering and structural dynamics identified for research includes: design and development of passive devices to control the seismic/dynamic response of SSCs, nonlinear behaviour of piping systems subjected to earthquake loading and nonlinear behavior of RCC structures under seismic excitation or dynamic loading. BARC has performed extensive work and also being continued in the above-identified areas. The work performed is helping for clearer understanding of nonlinear behavior of SSCs as well as in developing new schemes, methodologies and devices to control the earthquake response of SSCs. (author)

  6. 14th International Conference on Software Engineering, Artificial Intelligence Research, Management and Applications

    CERN Document Server

    2016-01-01

    This edited book presents scientific results of the 14th International Conference on Software Engineering, Artificial Intelligence Research, Management and Applications (SERA 2016) held on June 8-10, 2016 at Towson University, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review. This publication capture...

  7. Annual report of Nuclear Engineering Research Laboratory, University of Tokyo in fiscal 1993

    International Nuclear Information System (INIS)

    1994-08-01

    In this annual report, the activities of research and education, the state of operation of research facilities and others in fiscal year 1993 are summarized. Four main research facilities are the fast neutron source reactor 'Yayoi', the electron linear accelerator, the basic experiment facility for nuclear fusion reactor blanket design and the heavy irradiation research facility. The reactor and the accelerator are for the joint utilization by all universities in Japan, the blanket is used by the Faculty of Engineering, and the HIT is for the joint utilization in University of Tokyo. In fiscal year 1993, the installation of the fast neutron science research facility was approved. In this annual report, the management and operation of the above research facilities are described, and the research activities, the theses for doctorate and graduation theses of teachers, are summarized. (K.I.)

  8. EU H2020 SERA: Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe

    Science.gov (United States)

    Giardini, Domenico; Saleh, Kauzar; SERA Consortium, the

    2017-04-01

    SERA - Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe - is a new infrastructure project awarded in the last Horizon 2020 call for Integrating Activities for Advanced Communities (INFRAIA-01-2016-2017). Building up on precursor projects like NERA, SHARE, NERIES, SERIES, etc., SERA is expected to contribute significantly to the access of data, services and research infrastructures, and to develop innovative solutions in seismology and earthquake engineering, with the overall objective of reducing the exposure to risks associated to natural and anthropogenic earthquakes. For instance, SERA will revise the European Seismic Hazard reference model for input in the current revision of the Eurocode 8 on Seismic Design of Buildings; we also foresee to develop the first comprehensive framework for seismic risk modeling at European scale, and to develop new standards for future experimental observations and instruments for earthquake engineering and seismology. To that aim, SERA is engaging 31 institutions across Europe with leading expertise in the operation of research facilities, monitoring infrastructures, data repositories and experimental facilities in the fields of seismology, anthropogenic hazards and earthquake engineering. SERA comprises 26 activities, including 5 Networking Activities (NA) to improve the availability and access of data through enhanced community coordination and pooling of resources, 6 Joint Research Activities (JRA) aimed at creating new European standards for the optimal use of the data collected by the European infrastructures, Virtual Access (VA) to the 5 main European services for seismology and engineering seismology, and Trans-national Access (TA) to 10 high-class experimental facilities for earthquake engineering and seismology in Europe. In fact, around 50% of the SERA resources will be dedicated to virtual and transnational access. SERA and EPOS (European Platform Observing System, a European Research

  9. Advanced Reciprocating Engine Systems (ARES) Research at Argonne National Laboratory. A Report

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Sreenath [Argonne National Lab. (ANL), Argonne, IL (United States); Biruduganti, Muni [Argonne National Lab. (ANL), Argonne, IL (United States); Bihari, Bipin [Argonne National Lab. (ANL), Argonne, IL (United States); Sekar, Raj [Argonne National Lab. (ANL), Argonne, IL (United States)

    2014-08-01

    The goals of these experiments were to determine the potential of employing spectral measurements to deduce combustion metrics such as HRR, combustion temperatures, and equivalence ratios in a natural gas-fired reciprocating engine. A laser-ignited, natural gas-fired single-cylinder research engine was operated at various equivalence ratios between 0.6 and 1.0, while varying the EGR levels between 0% and maximum to thereby ensure steady combustion. Crank angle-resolved spectral signatures were collected over 266-795 nm, encompassing chemiluminescence emissions from OH*, CH*, and predominantly by CO2* species. Further, laser-induced gas breakdown spectra were recorded under various engine operating conditions.

  10. The design in the quali-quantitative research in the production engineering – epistemological issues

    Directory of Open Access Journals (Sweden)

    Leonardo Ensslin

    2008-07-01

    Full Text Available The present paper intends to present a proposition of design for qualitative research applied to production engineering which contemplates material and formal elements in the investigative process, concentrating the discussion on the epistemological basis of the scientific development in the internal and external criteria of validity of the qualitative research and in the formation of the researcher as a primary and strategic element of the production process of critical and valid knowledge in this area of knowledge. Firstly the controversy between Popper and Kuhn in relation to the scientism and scientific method is presented and then later presenting the construct of the authors about this. Then the qualitative and quantitative methods are characterized, justifying the need of the predominance of the qualitative approach in some areas of production engineering. The third section is about the research project, its characteristics, its formal and material elements, and the use of internal and external validation criteria in a disciplined way, the use of the qualitative research and the formation of the researcher. Key-words: Soft Operational Research; Quali-quantitative Research, Epistemology.

  11. [Research progress of co-culture system for constructing vascularized tissue engineered bone].

    Science.gov (United States)

    Fu, Weili; Xiang, Zhou

    2014-02-01

    To review the research progress of the co-culture system for constructing vascularized tissue engineered bone. The recent literature concerning the co-culture system for constructing vascularized tissue engineered bone was reviewed, including the selection of osteogenic and endothelial lineages, the design and surface modification of scaffolds, the models and dimensions of the co-culture system, the mechanism, the culture conditions, and their application progress. The construction of vascularized tissue engineered bone is the prerequisite for their survival and further clinical application in vivo. Mesenchymal stem cells (owning the excellent osteogenic potential) and endothelial progenitor cells (capable of directional differentiation into endothelial cell) are considered as attractive cell types for the co-culture system to construct vascularized tissue engineered bone. The culture conditions need to be further optimized. Furthermore, how to achieve the clinical goals of minimal invasion and autologous transplantation also need to be further studied. The strategy of the co-culture system for constructing vascularized tissue engineered bone would have a very broad prospects for clinical application in future.

  12. Enhancing a Commercial Game Engine to Support Research on Route Realism for Synthetic Human Characters

    Directory of Open Access Journals (Sweden)

    Gregg T. Hanold

    2011-01-01

    Full Text Available Generating routes for entities in virtual environments, such as simulated vehicles or synthetic human characters, is a long-standing problem, and route planning algorithms have been developed and studied for some time. Existing route planning algorithms, including the widely used A* algorithm, are generally intended to achieve optimality in some metric, such as minimum length or minimum time. Comparatively little attention has been given to route realism, defined as the similarity of the algorithm-generated route to the route followed by real humans in the same terrain with the same constraints and goals. Commercial game engines have seen increasing use as a context for research. To study route realism in a game engine, two developments were needed: a quantitative metric for measuring route realism and a game engine able to capture route data needed to compute the realism metric. Enhancements for recording route data for both synthetic characters and human players were implemented within the Unreal Tournament 2004 game engine. A methodology for assessing the realism of routes and other behaviors using a quantitative metric was developed. The enhanced Unreal Tournament 2004 game engine and the realism assessment methodology were tested by capturing data required to calculate a metric of route realism.

  13. Usability research study of a specially engineered sonic powered toothbrush with unique sensing and control technologies.

    Science.gov (United States)

    Hunter, Gail; Burns, Laurie; Bone, Brian; Mintel, Thomas; Jimenez, Eduardo

    2012-01-01

    This paper summarizes the results of a longitudinal usability research study of a specially engineered sonic powered toothbrush with unique sensing and control technologies. The usability test was conducted with fourteen (14) consumers from the St. Louis, MO, USA area who use manual toothbrushes. The study consisted of consumers using the specially engineered sonic powered toothbrush with unique sensing and control technologies for three weeks. During the study, users participated in four toothbrush trials during weekly visits to the research facility. These trials were videotaped and were analyzed regarding brushing time, behavior, and technique. In addition, the users were required to use the toothbrush twice a day for their at-home brushing. The toothbrush had a positive impact on consumers' tooth brushing behavior. Users spent more time brushing their teeth with this toothbrush as compared to their manual toothbrush. In addition, users spent more time keeping the sonic toothbrush in the recommended angle during use. Finally, users perceived their teeth to be cleaner when using the specially engineered sonic powered toothbrush with unique sensing and control technologies. The specially engineered sonic powered toothbrush with unique sensing and control technologies left a positive impression on the users. The users perceived the toothbrush to clean their teeth better than a manual toothbrush.

  14. An Update to Space Biomedical Research: Tissue Engineering in Microgravity Bioreactors

    Directory of Open Access Journals (Sweden)

    Abolfazl Barzegari

    2012-03-01

    Full Text Available Introduction: The severe need for constructing replacement tissues in organ transplantation has necessitated the development of tissue engineering approaches and bioreactors that can bring these approaches to reality. The inherent limitations of conventional bioreactors in generating realistic tissue constructs led to the devise of the microgravity tissue engineering that uses Rotating Wall Vessel (RWV bioreactors initially developed by NASA. Methods: In this review article, we intend to highlight some major advances and accomplishments in the rapidly-growing field of tissue engineering that could not be achieved without using microgravity. Results: Research is now focused on assembly of 3 dimensional (3D tissue fragments from various cell types in human body such as chondrocytes, osteoblasts, embryonic and mesenchymal stem cells, hepatocytes and pancreas islet cells. Hepatocytes cultured under microgravity are now being used in extracorporeal bioartificial liver devices. Tissue constructs can be used not only in organ replacement therapy, but also in pharmaco-toxicology and food safety assessment. 3D models of various cancers may be used in studying cancer development and biology or in high-throughput screening of anticancer drug candidates. Finally, 3D heterogeneous assemblies from cancer/immune cells provide models for immunotherapy of cancer. Conclusion: Tissue engineering in (simulated microgravity has been one of the stunning impacts of space research on biomedical sciences and their applications on earth.

  15. The RA nuclear research reactor at VINCA Institute as an engineering and scientific challenge

    International Nuclear Information System (INIS)

    Mesarovic, M.

    1997-01-01

    The RA nuclear research at the Vinca Institute of Nuclear Sciences is the largest nuclear research facility in Yugoslavia and belongs to that generation of research reactors which have had an important contribution to nuclear technology development. As these older reactors were generally not built to specific nuclear standards, new safety systems had to be installed at the RA reactor for a renewal of its operating licence in 1984 and it was shut down, after 25 years of operation. Although all the required and several additional systems were built for the restart of the RA reactor, a disruption of foreign delivery of new control equipment caused its conversion to a 'dormant' facility, and it is still out of operation. Therefore, the future status of the RA reactor presents an engineering and scientific challenge to the engineers and scientists from Yugoslavia and other countries that may be interested to participate. To attract their attention on the subject, principal features of the RA reactor and its present status are described in detail, based on a recent engineering economic and safety evaluation. A comparative review of the world research reactors is also presented.(author)

  16. 78 FR 52605 - Announcing the Twenty First Public Meeting of the Crash Injury Research and Engineering Network...

    Science.gov (United States)

    2013-08-23

    ... Injury Research and Engineering Network (CIREN) AGENCY: National Highway Traffic Safety Administration... Meeting of members of the Crash Injury Research and Engineering Network. CIREN is a collaborative effort... linked by a computer network. The current CIREN model utilizes two types of centers, medical and...

  17. RESEARCH ARTICLE Ne2 encodes protein(s) and the altered ...

    Indian Academy of Sciences (India)

    performed by using the MASCOT search engine 2.2 (Matrix Science, Ltd.) embedded into. GPS-Explorer Software 3.6 (Applied Biosystems) on the NCBI database Viridiplantae with the following parameter settings: 100 ppm mass accuracy, trypsin cleavage one missed cleavage allowed, carbamidomethylation set as fixed ...

  18. Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1991

    International Nuclear Information System (INIS)

    1992-01-01

    This publication summarizes the results of the joint utilization of the nuclear reactor 'Yayoi' and the electron beam accelerator in the Nuclear Engineering Research Laboratory, University of Tokyo, in fiscal year 1991. The Yayoi was operated smoothly throughout the year, and the number of research themes, for which the reactor Yayoi was jointly utilized, and the related themes reached 21 cases. After the linear accelerator was reconstructed as the twin linac, the joint utilization was resumed in October, 1989, and the number of research themes, was 15 cases. In this publication, in addition to the utilization reports, also the reports of 15 cases of Yayoi Study Meetings held in fiscal year 1991 are collected. (K.I.)

  19. Interdisciplinary research and education at the biology-engineering-computer science interface: a perspective.

    Science.gov (United States)

    Tadmor, Brigitta; Tidor, Bruce

    2005-09-01

    Progress in the life sciences, including genome sequencing and high-throughput experimentation, offers an opportunity for understanding biology and medicine from a systems perspective. This 'new view', which complements the more traditional component-based approach, involves the integration of biological research with approaches from engineering disciplines and computer science. The result is more than a new set of technologies. Rather, it promises a fundamental reconceptualization of the life sciences based on the development of quantitative and predictive models to describe crucial processes. To achieve this change, learning communities are being formed at the interface of the life sciences, engineering and computer science. Through these communities, research and education will be integrated across disciplines and the challenges associated with multidisciplinary team-based science will be addressed.

  20. 10th ACIS International Conference on Software Engineering Research, Management and Applications (SERA 2012)

    CERN Document Server

    Software Engineering Research, Management and Applications 2012

    2012-01-01

    The series Studies in Computational Intelligence (SCI) publishes new developments and advances in the various areas of computational intelligence-quickly and with a high quality.  The intent is to cover the theory, applications, and design methods of computational intelligence, as embedded in the fields of engineering, computer science, physics and life science, as well as the methodologies behind them.  The series contains monographs, lecture notes and edited volumes in computational intelligence spanning the areas of neural networks, connectionist systems, genetic algorithms, evolutionary computation, artificial intelligence, cellular automata, self-organizing systems, soft computing, fuzzy systems and hybrid intelligent systems. Critical to both contributors and readers are the short publication time and world-wide distribution-this permits a rapid and broad dissemination of research results.  The purpose of the 10th International Conference on Software Engineering Research, Management and Applications(...

  1. Challenges and Difficulties to Teaching Engineering to Generation Z: a case research

    OpenAIRE

    Barreiro, Suamit Correia; Bozutti, Daniel Fernando

    2017-01-01

    Many people from generation Z are at the beginning of their academic activities. This generation has peculiar characteristics that might be a challenge in the labor market. Thus, instructors have a great role in their preparation. However, professors might face difficulties dealing with their specific characteristics. The research aims to carry out a general survey to enable an understanding of the greater challenges and difficulties in teaching the subject of engineering to the students of G...

  2. Conceptual design of a mirror reactor for a fusion engineering research facility (FERF)

    International Nuclear Information System (INIS)

    Batzer, T.H.; Burleigh, R.C.; Carlson, G.A.; Dexter, W.L.; Hamilton, G.W.; Harvey, A.R.; Hickman, R.G.; Hoffman, M.A.; Hooper, E.B. Jr.; Moir, R.W.; Nelson, R.L.; Pittenger, L.C.; Smith, B.H.; Taylor, C.E.; Werner, R.W.; Wilcox, T.P.

    1975-01-01

    A conceptual design is presented for a small mirror fusion reactor for a Fusion Engineering Research Facility (FERF). The reactor produces 3.4 MW of fusion power and a useful neutron flux of about 10 14 n.cm -2 .s -1 . Superconducting ''yin-yang'' coils are used, and the plasma is sustained by injection of energetic neutral D 0 and T 0 . Conceptual layouts are given for the reactor, its major components, and supporting facilities. (author)

  3. Priming the Innovation Pump: America Needs More Scientists, Engineers, and Basic Research

    Science.gov (United States)

    2011-01-01

    produced. In 1930, Joseph Schumpeter , an Austrian economist, first pointed out that innovation is the key to economic growth ( Schumpeter , 1930...Economic Growth, National Security PRIMING THE INNOVATION PUMP: AMERICA NEEDS MORE SCIENTISTS, ENGINEERS, AND BASIC RESEARCH Col Jason James...is continuing to lose ground in critical technology metrics. In today’s knowledge- based economy, scientific innovation is more important to U.S

  4. Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1986

    International Nuclear Information System (INIS)

    1987-01-01

    This book contains a large number of reports of studies made in 1986 through joint utilization of the nuclear reactor 'Yayoi' and electron beam type accelerator which are installed in the Nuclear engineering Research Laboratory, Faculty of Engineering, University of Tokyo. The reports presented deal with 'Behaviors of Neutrons in Fast Reactor Blanket Shield', 'Effect of Fast Neutron Radiation on Organic Materials', 'Production and Recovery of Tritium in Nuclear Fusion Reactor Blanket System', 'Bench Mark Experiment of Effect of Atmospheric Scattering of Neutron', 'Experimental Evaluation of Nuclear Heat Rate', 'Fast Neutron Shielding Experiment', 'Effect of Fast Neutron Radiation on Hot Water', 'Neutron Shielding Experiment', 'Biological and Medical Application of 'Yayoi' Neutron', 'Effect of Fission-Fusion Correlation Radiation on Semiconductors (Si, GaAs)', 'Application of Fast Neutron to Radiography Technology', 'Streaming in Offset Slit', 'Design and Evaluation of New Reactor', 'LET Effect on Organic Material', 'Handling, Separation and Recovery of Transuranium Elements', 'Reactor Operation Support System Using Knowledge Engineering Technique', 'Application of Shape Memory Alloys to Nuclear Reactor Devices', 'Numerical Simulation of Turbulent Hear Transfer', and many other studies. (Nogami, K.)

  5. A global database and "state of the field" review of research into ecosystem engineering by land animals.

    Science.gov (United States)

    Coggan, Nicole V; Hayward, Matthew W; Gibb, Heloise

    2018-02-28

    Ecosystem engineers have been widely studied for terrestrial systems, but global trends in research encompassing the range of taxa and functions have not previously been synthesised. We reviewed contemporary understanding of engineer fauna in terrestrial habitats and assessed the methods used to document patterns and processes, asking: (a) which species act as ecosystem engineers and with whom do they interact? (b) What are the impacts of ecosystem engineers in terrestrial habitats and how are they distributed? (c) What are the primary methods used to examine engineer effects and how have these developed over time? We considered the strengths, weaknesses and gaps in knowledge related to each of these questions and suggested a conceptual framework to delineate "significant impacts" of engineering interactions for all terrestrial animals. We collected peer-reviewed publications examining ecosystem engineer impacts and created a database of engineer species to assess experimental approaches and any additional covariates that influenced the magnitude of engineer impacts. One hundred and twenty-two species from 28 orders were identified as ecosystem engineers, performing five ecological functions. Burrowing mammals were the most researched group (27%). Half of all studies occurred in dry/arid habitats. Mensurative studies comparing sites with and without engineers (80%) were more common than manipulative studies (20%). These provided a broad framework for predicting engineer impacts upon abundance and species diversity. However, the roles of confounding factors, processes driving these patterns and the consequences of experimentally adjusting variables, such as engineer density, have been neglected. True spatial and temporal replication has also been limited, particularly for emerging studies of engineer reintroductions. Climate change and habitat modification will challenge the roles that engineers play in regulating ecosystems, and these will become important avenues

  6. Interdisciplinary Undergraduate Research Experiences in Geosciences for Physical Science and Engineering Students

    Science.gov (United States)

    Bililign, S.; Schimmel, K.; Lin, Y. L.; Germuth, A.

    2014-12-01

    The recruitment of undergraduate students, especially minorities, into geoscience career paths continues to be a challenge. One approach for addressing this issue involves providing geoscience research experiences. Therefore, the outcomes of an undergraduate research program (REU) focused on recruiting science (physics, mathematics, chemistry) and engineering (electrical) students for an interdisciplinary research experience in geosciences will be presented. The program design has several unique features that include: (1) projects with clear societal implications, (2) projects involve multiple faculty members (at least two) and expose students to interdisciplinary approaches and thinking, (3) partnerships between national labs and universities to provide cutting-edge research, educational, and professional development opportunities for students, (4) student engagement in the creation of personalized professional development plans, (5) combined summer and academic year research experiences. Pre- and post-assessment results, successes, and challenges will be presented.

  7. Pollution prevention for cleaner air: EPA's air and energy engineering research laboratory

    International Nuclear Information System (INIS)

    Shaver, E.M.

    1992-01-01

    The article discusses the role of EPA's Air and Energy Engineering Research Laboratory (AEERL) in pollution prevention research for cleaner air. For more than 20 years, AEERL has been conducting research to identify control approaches for the pollutants and sources which contribute to air quality problems. The Laboratory has successfully developed and demonstrated cost-effective sulfur dioxide, nitrogen oxides, and particulate control technologies for fossil fuel combustion sources. More recently, it has expanded its research activities to include indoor air quality, radon, organic control, stratospheric ozone depletion, and global warming. AEERL also develops inventories of air emissions of many types. Over the last several years, it has made substantial efforts to expand research on pollution prevention as the preferred choice for air emissions reduction

  8. New frontiers of multidisciplinary research in STEAM-H (science, technology, engineering, agriculture, mathematics, and health)

    CERN Document Server

    2014-01-01

    This highly multidisciplinary volume contains contributions from leading researchers in STEAM-H disciplines (Science, Technology, Engineering, Agriculture, Mathematics and Health). The volume explores new frontiers in multidisciplinary research, including: the mathematics of cardiac arrhythmia; brain research on working memory; penalized ordinal regression to classify melanoma skin samples; forecasting of time series data; dynamics of niche models; analysis of chemical moieties as anticancer agents; study of gene locus control regions; qualitative mathematical modelling; convex quadrics and group circle systems; remanufacturing planning and control; complexity reduction of functional differential equations; computation of viscous interfacial motion; and differentiation in human pluripotent stem cells. An extension of a seminar series at Virginia State University, the collection is intended to foster student interest and participation in interdisciplinary research, and to stimulate new research. The content wi...

  9. BIOREMEDIATION OF HAZARDOUS WASTES - RESEARCH, DEVELOPMENT AND FIELD EVALUATIONS - 1995

    Science.gov (United States)

    The proceedings of the 1995 Symposium on Bioremediation of Hazardous Wastes, hosted by the Office of Research and Development (ORD) of the EPA in Rye Brook, New York. he symposium was the eighth annual meeting for the presentation of research conducted by EPA's Biosystems Technol...

  10. The Humanistic Side of Engineering: Considering Social Science and Humanities Dimensions of Engineering in Education and Research

    OpenAIRE

    Hynes, Morgan; Swenson, Jessica

    2013-01-01

    Mathematics and science knowledge/skills are most commonly associated with engineering’s pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the humanistic side of engineering with illustrative examples of what appealing to the humanistic side of engineering can look like in a classroom setting, a...

  11. Reactor physics teaching and research in the Swiss nuclear engineering master

    International Nuclear Information System (INIS)

    Chawla, R.

    2012-01-01

    Since 2008, a Master of Science program in Nuclear Engineering (NE) has been running in Switzerland, thanks to the combined efforts of the country's key players in nuclear teaching and research, viz. the Swiss Federal Inst.s of Technology at Lausanne (EPFL) and at Zurich (ETHZ), the Paul Scherrer Inst. (PSI) at Villigen and the Swiss Nuclear Utilities (Swissnuclear). The present paper, while outlining the academic program as a whole, lays emphasis on the reactor physics teaching and research training accorded to the students in the framework of the developed curriculum. (authors)

  12. Assessment of occupational exposure to engineered nanomaterials in research laboratories using personal monitors.

    Science.gov (United States)

    Iavicoli, Ivo; Fontana, Luca; Pingue, Pasqualantonio; Todea, Ana Maria; Asbach, Christof

    2018-06-15

    Exposure assessment is a key stage in the risk assessment/management of engineered nanomaterials. Although different sampling strategies and instruments have been used to define the occupational exposure to nano-scale materials, currently there is no international consensus regarding measurement strategy, metrics and limit values. In fact, the assessment of individual exposure to engineered nanomaterials remains a critical issue despite recent innovative developments in personal monitors and samplers. Hence, we used several of these instruments to evaluate the workers' personal exposure in a large research laboratory where engineered nanomaterials are produced, handled, and characterized in order to provide input data for nanomaterial exposure assessment strategies and future epidemiological studies. The results obtained using personal monitors showed that the workplace concentrations of engineered nanomaterials (lung deposited surface area and particle number concentrations) were quite low in all the different workplaces monitored, with short spikes during the execution of some specific job tasks. The sampling strategy was been adopted on the basis of an Organisation for Economic Cooperation and Development (OECD) suggestion for a tiered approach and was found to be suitable for determining the individual exposure and for identifying possible sources of emission, even those with very low emission rates. The use of these instruments may lead to a significant improvement not only in the exposure assessment stage but, more generally, in the entire risk assessment and management process. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Generation After Next Propulsor Research: Robust Design for Embedded Engine Systems

    Science.gov (United States)

    Arend, David J.; Tillman, Gregory; O'Brien, Walter F.

    2012-01-01

    The National Aeronautics and Space Administration, United Technologies Research Center and Virginia Polytechnic and State University have contracted to pursue multi-disciplinary research into boundary layer ingesting (BLI) propulsors for generation after next environmentally responsible subsonic fixed wing aircraft. This Robust Design for Embedded Engine Systems project first conducted a high-level vehicle system study based on a large commercial transport class hybrid wing body aircraft, which determined that a 3 to 5 percent reduction in fuel burn could be achieved over a 7,500 nanometer mission. Both pylon-mounted baseline and BLI propulsion systems were based on a low-pressure-ratio fan (1.35) in an ultra-high-bypass ratio engine (16), consistent with the next generation of advanced commercial turbofans. An optimized, coupled BLI inlet and fan system was subsequently designed to achieve performance targets identified in the system study. The resulting system possesses an inlet with total pressure losses less than 0.5%, and a fan stage with an efficiency debit of less than 1.5 percent relative to the pylon-mounted, clean-inflow baseline. The subject research project has identified tools and methodologies necessary for the design of next-generation, highly-airframe-integrated propulsion systems. These tools will be validated in future large-scale testing of the BLI inlet / fan system in NASA's 8 foot x 6 foot transonic wind tunnel. In addition, fan unsteady response to screen-generated total pressure distortion is being characterized experimentally in a JT15D engine test rig. These data will document engine sensitivities to distortion magnitude and spatial distribution, providing early insight into key physical processes that will control BLI propulsor design.

  14. How Authors Did It--A Methodological Analysis of Recent Engineering Education Research Papers in the European Journal of Engineering Education

    Science.gov (United States)

    Malmi, Lauri; Adawi, Tom; Curmi, Ronald; de Graaff, Erik; Duffy, Gavin; Kautz, Christian; Kinnunen, Päivi; Williams, Bill

    2018-01-01

    We investigated research processes applied in recent publications in the "European Journal of Engineering Education" (EJEE), exploring how papers link to theoretical work and how research processes have been designed and reported. We analysed all 155 papers published in EJEE in 2009, 2010 and 2013, classifying the papers using a taxonomy…

  15. How a diverse research ecosystem has generated new rehabilitation technologies: Review of NIDILRR's Rehabilitation Engineering Research Centers.

    Science.gov (United States)

    Reinkensmeyer, David J; Blackstone, Sarah; Bodine, Cathy; Brabyn, John; Brienza, David; Caves, Kevin; DeRuyter, Frank; Durfee, Edmund; Fatone, Stefania; Fernie, Geoff; Gard, Steven; Karg, Patricia; Kuiken, Todd A; Harris, Gerald F; Jones, Mike; Li, Yue; Maisel, Jordana; McCue, Michael; Meade, Michelle A; Mitchell, Helena; Mitzner, Tracy L; Patton, James L; Requejo, Philip S; Rimmer, James H; Rogers, Wendy A; Zev Rymer, W; Sanford, Jon A; Schneider, Lawrence; Sliker, Levin; Sprigle, Stephen; Steinfeld, Aaron; Steinfeld, Edward; Vanderheiden, Gregg; Winstein, Carolee; Zhang, Li-Qun; Corfman, Thomas

    2017-11-06

    Over 50 million United States citizens (1 in 6 people in the US) have a developmental, acquired, or degenerative disability. The average US citizen can expect to live 20% of his or her life with a disability. Rehabilitation technologies play a major role in improving the quality of life for people with a disability, yet widespread and highly challenging needs remain. Within the US, a major effort aimed at the creation and evaluation of rehabilitation technology has been the Rehabilitation Engineering Research Centers (RERCs) sponsored by the National Institute on Disability, Independent Living, and Rehabilitation Research. As envisioned at their conception by a panel of the National Academy of Science in 1970, these centers were intended to take a "total approach to rehabilitation", combining medicine, engineering, and related science, to improve the quality of life of individuals with a disability. Here, we review the scope, achievements, and ongoing projects of an unbiased sample of 19 currently active or recently terminated RERCs. Specifically, for each center, we briefly explain the needs it targets, summarize key historical advances, identify emerging innovations, and consider future directions. Our assessment from this review is that the RERC program indeed involves a multidisciplinary approach, with 36 professional fields involved, although 70% of research and development staff are in engineering fields, 23% in clinical fields, and only 7% in basic science fields; significantly, 11% of the professional staff have a disability related to their research. We observe that the RERC program has substantially diversified the scope of its work since the 1970's, addressing more types of disabilities using more technologies, and, in particular, often now focusing on information technologies. RERC work also now often views users as integrated into an interdependent society through technologies that both people with and without disabilities co-use (such as the internet

  16. NASA/DoD Aerospace Knowledge Diffusion Research Project. Paper 31: The information-seeking behavior of engineers

    Science.gov (United States)

    Pinelli, Thomas E.; Bishop, Ann P.; Barclay, Rebecca O.; Kennedy, John M.

    1993-01-01

    Engineers are an extraordinarily diverse group of professionals, but an attribute common to all engineers is their use of information. Engineering can be conceptualized as an information processing system that must deal with work-related uncertainty through patterns of technical communications. Throughout the process, data, information, and tacit knowledge are being acquired, produced, transferred, and utilized. While acknowledging that other models exist, we have chosen to view the information-seeking behavior of engineers within a conceptual framework of the engineer as an information processor. This article uses the chosen framework to discuss information-seeking behavior of engineers, reviewing selected literature and empirical studies from library and information science, management, communications, and sociology. The article concludes by proposing a research agenda designed to extend our current, limited knowledge of the way engineers process information.

  17. Radiation-engineered nanomaterials. The role of the IAEA in coordinating research

    International Nuclear Information System (INIS)

    Haji-Saeid, M.; Safrany, A.; Sampa, M.H. de O.; Ramamoorthy, N.

    2011-01-01

    Complete text of publication follows. Radiation technologies, already established in materials processing, have properties uniquely for the creation of new functional materials on the nanoscale, both in 'top-to-bottom' and 'bottom-up' approaches. For example, controlled radiation degradation may be used for fabrication of nanoporous and nanostructured surfaces and membranes; while radiation polymerization, crosslinking and grafting could produce functional polymeric, metallic and semiconductor nanoparticles, functional nanostructured surfaces and nanocomposites. Applications for such nanostructured materials are manifold, from 3D structures, templates for nanowire fabrication, supports for purification, and proton exchange membranes, to imaging, diagnostics, targeted drug and gene delivery, wound healing and cell sheet engineering. Considering the significant potential as well as the already demonstrated successful applications in using radiation methods for synthesis and characterization of nano-sized materials as well as the interdisciplinary nature of nanotechnology, and in order to facilitate the coordination between radiation-based research groups and nanotechnology centres, the IAEA has organized a number of consultancy meetings, training courses and workshops. Additionally, a coordinated research project entitled 'Nanoscale Radiation Engineering of Advanced Materials for Potential Biomedical applications' in progress, under which 17 IAEA Member States institutions work together to develop radiolytic methodologies for synthesis of nanoparticles and nanoporous membranes; polymeric, inorganic and hybrid nanocarriers for various healthcare applications. This presentation will describe the present activities of the IAEA and plans for future supports for fostering development and application of radiation-engineered functional nanomaterials.

  18. Research Laboratory for Engineering and Tehnology (ReLEnT)-Summer Program

    Science.gov (United States)

    Okhio, Cyril B.

    1996-01-01

    During the fiscal years 1994-1995 students at Central State University (CSU) have worked diligently under the supervision of the PI and associates to plan, design and conduct a four-week hands on summer program for high school students in grades 9 to 12. These workshops consists of experiments and computer aided design and manufacturing, designed to constructively stimulate interests in engineering and technology, and promote enrollment at CSU after they matriculate from high school. The experience gained in two years will be utilized to realize one of the deliverables for CSU engineering program during 1996. In FY-96 a new total of 30 students are now being interviewed for the 1996 program. This grant also provides resource for students enrolled in CSU's engineering program to work as undergraduate research assistants and ReLEnT tuition scholarship awards. These students are involved in the development of research, design projects, workshop procedures, laboratory exercises and seminars. Undergraduate students receiving tuition scholarships are required to maintain a cumulative grade point average of 3.0 or higher. Finally, the ReLEnT award has made it possible for CSU to acquire some experimental and CFD capability which now provides us with the opportunity to compete and respond to RFP's on a competitive basis and a timely manner.

  19. Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1983

    International Nuclear Information System (INIS)

    1984-01-01

    Much achievement was obtained also in fiscal 1983 by the common utilization of the nuclear reactor ''Yayoi'' and the linear accelerator in the Nuclear Engineering Research Laboratory, University of Tokyo. These results were summarized, and this report is published. In the utilization of the reactor ''Yayoi'', the period of operation and the maximum output were limited very much, because long cooling period is necessary to prepare for the repair of fuel cladding in the next year. Also foreign research students commonly utilized the reactor ''Yayoi''. The common utilization of the linear accelerator was begun six years ago, and now it is carried out widely and smoothly. The total number of those who commonly utilized the facilities reached 3,179. The summaries of the results of 5 on-pile researches, 17 off-pile researches, and 16 researches using the linear accelerator are collected. The committee meetings and study meetings held in fiscal 1983 are listed. The names of the members of various committees and the names of those in charge of various experiments are given. (Kako, I.)

  20. Neutron scattering for industrial and engineering research at the OPAL reactor

    International Nuclear Information System (INIS)

    Reid, Mark

    2015-01-01

    The OPAL research reactor at ANSTO has a number of neutron instruments available for science and engineering applications. The instruments have a unique non-destructive ability to determine critical aspects of a wide variety of material systems. This includes surfaces, defects, fine scale dispersions, texture and residual stresses. This information can provide a direct impact into optimization of modern manufacturing processes, improved product reliability, enhanced design performance, reduced production cost, and extended life prediction on significant engineering assets (e.g. power-station utilities, gas pipelines, aircrafts, trains, etc.). This presentation will focus on two instruments in particular: Kowari, the strain and crystallographic texture measurement system and Dingo the radiography/tomography instrument. (author)

  1. Ice Crystal Icing Engine Testing in the NASA Glenn Research Center's Propulsion Systems Laboratory (PSL): Altitude Investigation

    Science.gov (United States)

    Oliver, Michael J.

    2015-01-01

    The National Aeronautics and Space Administration conducted a full scale ice crystal icing turbofan engine test in the NASA Glenn Research Centers Propulsion Systems Laboratory (PSL) Facility in February 2013. Honeywell Engines supplied the test article, an obsolete, unmodified Lycoming ALF502-R5 turbofan engine serial number LF01 that experienced an un-commanded loss of thrust event while operating at certain high altitude ice crystal icing conditions. These known conditions were duplicated in the PSL for this testing.

  2. Climate Engineering: avoiding Pandora's box through research and governance

    Energy Technology Data Exchange (ETDEWEB)

    Honegger, Matthias; Michaelowa, Axel; Butzengeiger-Geyer, Sonja

    2011-07-01

    Emissions of greenhouse gases continue to rise, and emission reduction efforts are increasingly seen as inadequate to stay below the 2 degrees C threshold agreed internationally, but countries shy away from shouldering the burden of emissions abatement. Therefore, in the next decades an increase in meteorological extreme events is increasingly likely to trigger public pressure to find quick solutions to halt climate change. Climate engineering (CE), especially Solar Radiation Management (SRM) proposals, will be attractive in this context. But SRM could turn into a Pandora's Box if not managed carefully. A sudden political demand for implementing CE could end in disaster if pressure leads to premature deployment. It is vital to establish a solid understanding of CE with all its indirect effects as well as significant acceptance and thus legitimacy. Since for many CE options, the risks seem negatively correlated to costs, a global research coordination effort is needed that is fully transparent and avoids biases introduced by interest groups. The IPCC would be the right forum to harness this research. Research should go hand in hand with the development of new norms and international approaches in monitoring, similar to the case of nuclear weapons or terrorism. It is time for climate engineering to enter the discourse on climate change mitigation - in a research-led, transparent and conscientiously governed manner.(Author)

  3. [Research-oriented experimental course of plant cell and gene engineering for undergraduates].

    Science.gov (United States)

    Xiaofei, Lin; Rong, Zheng; Morigen, Morigen

    2015-04-01

    Research-oriented comprehensive experimental course for undergraduates is an important part for their training of innovation. We established an optional course of plant cell and gene engineering for undergraduates using our research platform. The course is designed to study the cellular and molecular basis and experimental techniques for plant tissue culture, isolation and culture of protoplast, genetic transformation, and screening and identification of transgenic plants. To develop undergraduates' ability in experimental design and operation, and inspire their interest in scientific research and innovation consciousness, we integrated experimental teaching and practice in plant genetic engineering on the tissue, cellular, and molecular levels. Students in the course practiced an experimental teaching model featured by two-week teaching of principles, independent experimental design and bench work, and ready-to-access laboratory. In this paper, we describe the contents, methods, evaluation system and a few issues to be solved in this course, as well as the general application and significance of the research-oriented experimental course in reforming undergraduates' teaching and training innovative talents.

  4. The Brazilian research and teaching center in biomedicine and aerospace biomedical engineering.

    Science.gov (United States)

    Russomano, T; Falcao, P F; Dalmarco, G; Martinelli, L; Cardoso, R; Santos, M A; Sparenberg, A

    2008-08-01

    The recent engagement of Brazil in the construction and utilization of the International Space Station has motivated several Brazilian research institutions and universities to establish study centers related to Space Sciences. The Pontificia Universidade Catolica do Rio Grande do Sul (PUCRS) is no exception. The University initiated in 1993 the first degree course training students to operate commercial aircraft in South America (the School of Aeronautical Sciences. A further step was the decision to build the first Brazilian laboratory dedicated to the conduct of experiments in ground-based microgravity simulation. Established in 1998, the Microgravity Laboratory, which was located in the Instituto de Pesquisas Cientificas e Tecnologicas (IPCT), was supported by the Schools of Medicine, Aeronautical Sciences and Electrical Engineering/Biomedical Engineering. At the end of 2006, the Microgravity Laboratory became a Center and was transferred to the School of Engineering. The principal activities of the Microgravity Centre are the development of research projects related to human physiology before, during and after ground-based microgravity simulation and parabolic flights, to aviation medicine in the 21st century and to aerospace biomedical engineering. The history of Brazilian, and why not say worldwide, space science should unquestionably go through PUCRS. As time passes, the pioneering spirit of our University in the aerospace area has become undeniable. This is due to the group of professionals, students, technicians and staff in general that have once worked or are still working in the Center of Microgravity, a group of faculty and students that excel in their undeniable technical-scientific qualifications.

  5. Notion Of Artificial Labs Slow Global Warming And Advancing Engine Studies Perspectives On A Computational Experiment On Dual-Fuel Compression-Ignition Engine Research

    Directory of Open Access Journals (Sweden)

    Tonye K. Jack

    2017-06-01

    Full Text Available To appreciate clean energy applications of the dual-fuel internal combustion engine D-FICE with pilot Diesel fuel to aid public policy formulation in terms of present and future benefits to the modern transportation stationary power and promotion of oil and gas green- drilling the brief to an engine research team was to investigate the feasible advantages of dual-fuel compression-ignition engines guided by the following concerns i Sustainable fuel and engine power delivery ii The requirements for fuel flexibility iii Low exhausts emissions and environmental pollution iv Achieving low specific fuel consumption and economy for maximum power v The comparative advantages over the conventional Diesel engines vi Thermo-economic modeling and analysis for the optimal blend as basis for a benefitcost evaluation Planned in two stages for reduced cost and fast turnaround of results - initial preliminary stage with basic simple models and advanced stage with more detailed complex modeling. The paper describes a simplified MATLAB based computational experiment predictive model for the thermodynamic combustion and engine performance analysis of dual-fuel compression-ignition engine studies operating on the theoretical limited-pressure cycle with several alternative fuel-blends. Environmental implications for extreme temperature moderation are considered by finite-time thermodynamic modeling for maximum power with predictions for pollutants formation and control by reaction rates kinetics analysis of systematic reduced plausible coupled chemistry models through the NCN reaction pathway for the gas-phase reactions classes of interest. Controllable variables for engine-out pollutants emissions reduction and in particular NOx elimination are identified. Verifications and Validations VampV through Performance Comparisons were made using a clinical approach in selection of StrokeBore ratios greater-than and equal-to one amp88051 low-to-high engine speeds and medium

  6. Co-Curricular Connections: The Role of Undergraduate Research Experiences in Promoting Engineering Students' Communication, Teamwork, and Leadership Skills

    Science.gov (United States)

    Carter, Deborah Faye; Ro, Hyun Kyoung; Alcott, Benjamin; Lattuca, Lisa R.

    2016-01-01

    This study examined the impact of undergraduate research (UR) in engineering, focusing on three particular learning outcomes: communication, teamwork, and leadership. The study included 5126 students across 31 colleges of engineering. The authors employed propensity score matching method to address the selection bias for selection into (and…

  7. Analyzing Citation and Research Collaboration Characteristics of Faculty in Aerospace, Civil and Environmental, Electrical and Computer, and Mechanical Engineering

    Science.gov (United States)

    Zhang, Li

    2018-01-01

    This article investigates citation and research collaboration habits of faculty in four engineering departments. The analysis focuses on similarities and differences among the engineering disciplines. Main differences exist in the use of conference papers and technical reports. The age of cited materials varies by discipline and by format.…

  8. Survey of French research in biological and medical engineering - aims, means, results

    International Nuclear Information System (INIS)

    Teissier, J.

    1975-01-01

    A review of the aims and means available is followed by an outline of the results of French research in biological and medical engineering. Most of the work undertaken has given very positive results from the scientific view-point, followed up by industrial applications. Scintigraphic image processing research has led to CINE 200. A study of heart output quantification in real time has produced a haemodynamic investigation system, the Sysconoram, now commercialized. The study of heart signal recording methods has led to a marketable and reliable system for the detection of pathological heart conditions. Research in neurosurgery on the use of pressure transducers in integrated technology, using a piezoelectric detector associated with a field effect amplifier, has enabled two types of extradural pressure transducer and one cervical intraventricular pressure transducer to be industrialized. Finally the study of a gamma detector combined with a light-amplifier tube has led to the development of camera giving quite exceptional results [fr

  9. Responsible innovation: a pilot study with the U.K. Engineering and Physical Sciences Research Council.

    Science.gov (United States)

    Owen, Richard; Goldberg, Nicola

    2010-11-01

    Significant time lags between the development of novel innovations (e.g., nanotechnologies), understanding of their wider impacts, and subsequent governance (e.g., regulation) have led to repeated calls for more anticipatory and adaptive approaches that promote the responsible emergence of new technologies in democratic societies. A key challenge is implementation in a pragmatic way. Results are presented of a study with the Engineering and Physical Sciences Research Council, the largest public funder of basic innovation research in the United Kingdom who, for the first time, asked applicants to submit a risk register identifying the wider potential impacts and associated risks (environment, health, societal, and ethical) of their proposed research. This focused on nanoscience for carbon capture and utilization. Risk registers were completed conservatively, with most identified impacts concerning researchers' health associated with nanoparticle synthesis, handling, and prototype device fabrication, i.e., risks that could be identified and managed with a reasonable level of certainty. Few wider environmental impacts and no future impacts on society were identified, reflecting the often uncertain and unpredictable nature of innovation. However, some applicants addressed this by including investigators with expertise beyond engineering and nanosciences supporting integrated activities that included life cycle and real-time technology assessment, which in some cases were also framed by stakeholder and/or public engagement. Proposals underpinned by a strong commitment to responsible science and innovation promoted continuous reflexivity, embedding a suite of multidisciplinary approaches around the innovation research core to support decisions modulating the trajectory of their innovation research in real-time.

  10. Risk Management in Coastal Engineering - Applied Research Projects for the German Wadden Sea

    Science.gov (United States)

    Woeffler, T.; Grimm, C.; Bachmann, D.; Jensen, J.; Mudersbach, C.; Froehle, P.; Thorenz, F.; Schuettrumpf, H.

    2012-04-01

    Several islands in the northfrisian part of the UNESCO - World Natural Heritage Wadden Sea are exposed to extreme storm surges due to climate change and sea level rise. Existing coastal protection measures in this area do not consider the future sea state and are mainly based on tradition and expert knowledge. The two projects HoRisK and ZukunftHallig (supported by the German Coastal Engineering Research Council) focus on this area and implement the requirements defined in the Directive 2007/60/EC on the assessment and management of flood risk. The main objects of the projects are the design and evaluation of new coastal protection techniques for the investigation area. With numerical simulations hydrological parameters are investigated in order to design new coastal protection- and management strategies. The decision support system PROMAIDES (Protection Measure against Inundation Decision Support) developed at the Institute of Hydraulic Engineering and Water Resources Management of the RWTH Aachen University analyzes the effects and reliability of new coastal protection techniques and evaluates inundation areas and economic damages for different hydrological boundary conditions. As a result flood risk and hazard maps are shown in this work. Furthermore sensitivity analyses expose possible variations in future storm surges and illustrate the difference in significant wave heights for varying wind climates. This risk based approach of both projects is a suitable way to ensure life for further generations on these islands under sustainable ecological und economic conditions. Acknowledgments This work was supported by the KFKI (German Coastal Engineering Research Council) and the German Federal Ministery of Education and Research (BMBF) (Project No. 03KIS094 and 03KIS078)

  11. Electronic journals: Their use by teachers/researchers of engineering and social sciences

    Science.gov (United States)

    Martins, Fernanda; Machado, Diana; Fernandes, Alberto; Ribeiro, Fernanda

    2015-02-01

    Libraries must attend the needs of their different users. Academics are usually a particular kind of users with specific needs. Universities are environments where scientific communication is essential and where electronic format of journals is becoming more and more frequently used. This way it becomes increasingly important to understand how academics from different scientific areas use the available electronic resources. The aim of this study is to better understand the existing differences among the users of electronic journals in Engineering and Social Sciences. The research undertaken was mainly focused on the study of the use of electronic journals by teachers/researchers from the Faculties of Engineering and of Arts from the University of Porto, Portugal. In this study an international survey was used in order to characterize the levels of use and access of electronic journals by these communities. The ways of seeking and using scientific information, namely in terms frequency of access, the number of articles consulted, the use of databases and the preference of publishing in electronic journals were analyzed. A set of comparisons were established and results indicate an extensive use of the electronic format, regardless the faculty. However, some differences emerge when it comes to details. Such is the case of the usage rate of reference management software which is considerably more used by Engineering academics than Social Science ones. Generally, electronic journals meeting the information needs of its users and are increasingly used as a preferred means of research. Though, some particular differences in the use of them have emerged, when comparing academics from these two faculties.

  12. Electronic journals: Their use by teachers/researchers of engineering and social sciences

    International Nuclear Information System (INIS)

    Martins, Fernanda; Machado, Diana; Fernandes, Alberto; Ribeiro, Fernanda

    2015-01-01

    Libraries must attend the needs of their different users. Academics are usually a particular kind of users with specific needs. Universities are environments where scientific communication is essential and where electronic format of journals is becoming more and more frequently used. This way it becomes increasingly important to understand how academics from different scientific areas use the available electronic resources. The aim of this study is to better understand the existing differences among the users of electronic journals in Engineering and Social Sciences. The research undertaken was mainly focused on the study of the use of electronic journals by teachers/researchers from the Faculties of Engineering and of Arts from the University of Porto, Portugal. In this study an international survey was used in order to characterize the levels of use and access of electronic journals by these communities. The ways of seeking and using scientific information, namely in terms frequency of access, the number of articles consulted, the use of databases and the preference of publishing in electronic journals were analyzed. A set of comparisons were established and results indicate an extensive use of the electronic format, regardless the faculty. However, some differences emerge when it comes to details. Such is the case of the usage rate of reference management software which is considerably more used by Engineering academics than Social Science ones. Generally, electronic journals meeting the information needs of its users and are increasingly used as a preferred means of research. Though, some particular differences in the use of them have emerged, when comparing academics from these two faculties

  13. Performance Engineering Research Institute SciDAC-2 Enabling Technologies Institute Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, Robert

    2013-04-20

    Enhancing the performance of SciDAC applications on petascale systems had high priority within DOE SC at the start of the second phase of the SciDAC program, SciDAC-2, as it continues to do so today. Achieving expected levels of performance on high-end computing (HEC) systems is growing ever more challenging due to enormous scale, increasing architectural complexity, and increasing application complexity. To address these challenges, the University of Southern California?s Information Sciences Institute organized the Performance Engineering Research Institute (PERI). PERI implemented a unified, tripartite research plan encompassing: (1) performance modeling and prediction; (2) automatic performance tuning; and (3) performance engineering of high profile applications. Within PERI, USC?s primary research activity was automatic tuning (autotuning) of scientific software. This activity was spurred by the strong user preference for automatic tools and was based on previous successful activities such as ATLAS, which automatically tuned components of the LAPACK linear algebra library, and other recent work on autotuning domain-specific libraries. Our other major component was application engagement, to which we devoted approximately 30% of our effort to work directly with SciDAC-2 applications. This report is a summary of the overall results of the USC PERI effort.

  14. Electronic Engineering Notebook: A software environment for research execution, documentation and dissemination

    Science.gov (United States)

    Moerder, Dan

    1994-01-01

    The electronic engineering notebook (EEN) consists of a free form research notebook, implemented in a commercial package for distributed hypermedia, which includes utilities for graphics capture, formatting and display of LaTex constructs, and interfaces to the host operating system. The latter capability consists of an information computer-aided software engineering (CASE) tool and a means to associate executable scripts with source objects. The EEN runs on Sun and HP workstations. The EEN, in day-to-day use can be used in much the same manner as the sort of research notes most researchers keep during development of projects. Graphics can be pasted in, equations can be entered via LaTex, etc. In addition, the fact that the EEN is hypermedia permits easy management of 'context', e.g., derivations and data can contain easily formed links to other supporting derivations and data. The CASE tool also permits development and maintenance of source code directly in the notebook, with access to its derivations and data.

  15. Design of a microprocessor-based Control, Interface and Monitoring (CIM unit for turbine engine controls research

    Science.gov (United States)

    Delaat, J. C.; Soeder, J. F.

    1983-01-01

    High speed minicomputers were used in the past to implement advanced digital control algorithms for turbine engines. These minicomputers are typically large and expensive. It is desirable for a number of reasons to use microprocessor-based systems for future controls research. They are relatively compact, inexpensive, and are representative of the hardware that would be used for actual engine-mounted controls. The Control, Interface, and Monitoring Unit (CIM) contains a microprocessor-based controls computer, necessary interface hardware and a system to monitor while it is running an engine. It is presently being used to evaluate an advanced turbofan engine control algorithm.

  16. Graduate Student Program in Materials and Engineering Research and Development for Future Accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Spentzouris, Linda [Illinois Inst. of Technology, Chicago, IL (United States)

    2016-07-07

    The objective of the proposal was to develop graduate student training in materials and engineering research relevant to the development of particle accelerators. Many components used in today's accelerators or storage rings are at the limit of performance. The path forward in many cases requires the development of new materials or fabrication techniques, or a novel engineering approach. Often, accelerator-based laboratories find it difficult to get top-level engineers or materials experts with the motivation to work on these problems. The three years of funding provided by this grant was used to support development of accelerator components through a multidisciplinary approach that cut across the disciplinary boundaries of accelerator physics, materials science, and surface chemistry. The following results were achieved: (1) significant scientific results on fabrication of novel photocathodes, (2) application of surface science and superconducting materials expertise to accelerator problems through faculty involvement, (3) development of instrumentation for fabrication and characterization of materials for accelerator components, (4) student involvement with problems at the interface of material science and accelerator physics.

  17. A Research Agenda for Identifying and Developing Required Competencies in Software Engineering

    Directory of Open Access Journals (Sweden)

    Yvonne Sedelmaier

    2013-04-01

    Full Text Available 0 0 1 130 820 Hochschule Coburg 6 1 949 14.0 96 Normal 0 21 false false false DE JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normale Tabelle"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Various issues make learning and teaching software engineering a challenge for both students and instructors. Since there are no standard curricula and no cookbook recipes for successful software engineering, it is fairly hard to figure out which specific topics and competencies should be learned or acquired by a particular group of students. Furthermore, it is not clear which particular didactic approaches might work well for a specific topic and a particular group of students. This contribution presents a research agenda that aims at identifying relevant competencies and environmental constraints as well as their effect on learning and teaching software engineering. To that end, an experimental approach will be taken. As a distinctive feature, this approach iteratively introduces additional or modified didactical methods into existing courses and carefully evaluates their appropriateness. Thus, it continuously improves these methods.

  18. Comparison of Four Search Engines and their efficacy With Emphasis on Literature Research in Addiction (Prevention and Treatment).

    Science.gov (United States)

    Samadzadeh, Gholam Reza; Rigi, Tahereh; Ganjali, Ali Reza

    2013-01-01

    Surveying valuable and most recent information from internet, has become vital for researchers and scholars, because every day, thousands and perhaps millions of scientific works are brought out as digital resources which represented by internet and researchers can't ignore this great resource to find related documents for their literature search, which may not be found in any library. With regard to variety of documents presented on the internet, search engines are one of the most effective search tools for finding information. The aim of this study is to evaluate the three criteria, recall, preciseness and importance of the four search engines which are PubMed, Science Direct, Google Scholar and federated search of Iranian National Medical Digital Library in addiction (prevention and treatment) to select the most effective search engine for offering the best literature research. This research was a cross-sectional study by which four popular search engines in medical sciences were evaluated. To select keywords, medical subject heading (Mesh) was used. We entered given keywords in the search engines and after searching, 10 first entries were evaluated. Direct observation was used as a mean for data collection and they were analyzed by descriptive statistics (number, percent number and mean) and inferential statistics, One way analysis of variance (ANOVA) and post hoc Tukey in Spss. 15 statistical software. P Value search engines had different operations with regard to the evaluated criteria. Since P Value was 0.004 search engines. PubMed, Science Direct and Google Scholar were the best in recall, preciseness and importance respectively. As literature research is one of the most important stages of research, it's better for researchers, especially Substance-Related Disorders scholars to use different search engines with the best recall, preciseness and importance in that subject field to reach desirable results while searching and they don't depend on just one

  19. Toward steadfast growth of antibiotic research in China: from natural products to engineered biosynthesis.

    Science.gov (United States)

    Kang, Qianjin; Bai, Linquan; Deng, Zixin

    2012-01-01

    Antibiotics are widely used for clinical treatment and preventing or curing diseases in agriculture. Cloning and studies of their biosynthetic gene clusters are vital for yield enhancement and engineering new derivatives with new and prominent activities. In recent years, research in this aspect is impressively active in China. This article reviews biosynthetic progress on 28 antibiotics, including polyketides, nonribosomal peptides, hybrid polyketide-nonribosomal peptides, peptidyl nucleoside, nucleoside, and others. Their biosynthetic mechanisms were disclosed, and their derivatives with new structures/activities were obtained by gene inactivation, mutasynthesis and combinatorial biosynthesis. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. The engineering project and reliability research of the safety interlock slow control system in BESIII

    International Nuclear Information System (INIS)

    Zhang Yinhong; Zhao Jingwei; Li Xiaonan; Xie Xiaoxi; Gao Cuishan; Bai Jingzhi; Chen Xihui; Min Jian; Nie Zhendong

    2008-01-01

    The new safety interlock slow control system of BESIII is designed to ensure that the BESIII interior equipments and the accelerator control center to work in coordination, and to guarantee the safety of the operating staff and all the important equipments at the same time. This paper introduces the hardware and software design of safety interlock system from the engineering requirements angle, including a detailed research on the software implementation technique of the state machine on PLC and the reliability of the system. (authors)

  1. Cell Engineering and Molecular Pharming for Biopharmaceuticals

    Science.gov (United States)

    Abdullah, M.A; Rahmah, Anisa ur; Sinskey, A.J; Rha, C.K

    2008-01-01

    Biopharmaceuticals are often produced by recombinant E. coli or mammalian cell lines. This is usually achieved by the introduction of a gene or cDNA coding for the protein of interest into a well-characterized strain of producer cells. Naturally, each recombinant production system has its own unique advantages and disadvantages. This paper examines the current practices, developments, and future trends in the production of biopharmaceuticals. Platform technologies for rapid screening and analyses of biosystems are reviewed. Strategies to improve productivity via metabolic and integrated engineering are also highlighted. PMID:19662143

  2. Integrating Human Factors Engineering and Information Processing Approaches to Facilitate Evaluations in Criminal Justice Technology Research.

    Science.gov (United States)

    Salvemini, Anthony V; Piza, Eric L; Carter, Jeremy G; Grommon, Eric L; Merritt, Nancy

    2015-06-01

    Evaluations are routinely conducted by government agencies and research organizations to assess the effectiveness of technology in criminal justice. Interdisciplinary research methods are salient to this effort. Technology evaluations are faced with a number of challenges including (1) the need to facilitate effective communication between social science researchers, technology specialists, and practitioners, (2) the need to better understand procedural and contextual aspects of a given technology, and (3) the need to generate findings that can be readily used for decision making and policy recommendations. Process and outcome evaluations of technology can be enhanced by integrating concepts from human factors engineering and information processing. This systemic approach, which focuses on the interaction between humans, technology, and information, enables researchers to better assess how a given technology is used in practice. Examples are drawn from complex technologies currently deployed within the criminal justice system where traditional evaluations have primarily focused on outcome metrics. Although this evidence-based approach has significant value, it is vulnerable to fully account for human and structural complexities that compose technology operations. Guiding principles for technology evaluations are described for identifying and defining key study metrics, facilitating communication within an interdisciplinary research team, and for understanding the interaction between users, technology, and information. The approach posited here can also enable researchers to better assess factors that may facilitate or degrade the operational impact of the technology and answer fundamental questions concerning whether the technology works as intended, at what level, and cost. © The Author(s) 2015.

  3. Ethics Education and Scientific and Engineering Research: What's Been Learned? What Should Be Done? Summary of a Workshop

    Science.gov (United States)

    Hollander, Rachelle, Ed.; Arenberg, Carol R., Ed.

    2009-01-01

    Increasing complexity and competitiveness in research environments, the prevalence of interdisciplinary and international involvement in research projects, and the close coupling of commerce and academia have created an ethically challenging environment for young scientists and engineers. For the past several decades, federal research agencies…

  4. Computer-Aided Systems Engineering for Flight Research Projects Using a Workgroup Database

    Science.gov (United States)

    Mizukami, Masahi

    2004-01-01

    An online systems engineering tool for flight research projects has been developed through the use of a workgroup database. Capabilities are implemented for typical flight research systems engineering needs in document library, configuration control, hazard analysis, hardware database, requirements management, action item tracking, project team information, and technical performance metrics. Repetitive tasks are automated to reduce workload and errors. Current data and documents are instantly available online and can be worked on collaboratively. Existing forms and conventional processes are used, rather than inventing or changing processes to fit the tool. An integrated tool set offers advantages by automatically cross-referencing data, minimizing redundant data entry, and reducing the number of programs that must be learned. With a simplified approach, significant improvements are attained over existing capabilities for minimal cost. By using a workgroup-level database platform, personnel most directly involved in the project can develop, modify, and maintain the system, thereby saving time and money. As a pilot project, the system has been used to support an in-house flight experiment. Options are proposed for developing and deploying this type of tool on a more extensive basis.

  5. Developing a framework for qualitative engineering: Research in design and analysis of complex structural systems

    Science.gov (United States)

    Franck, Bruno M.

    1990-01-01

    The research is focused on automating the evaluation of complex structural systems, whether for the design of a new system or the analysis of an existing one, by developing new structural analysis techniques based on qualitative reasoning. The problem is to identify and better understand: (1) the requirements for the automation of design, and (2) the qualitative reasoning associated with the conceptual development of a complex system. The long-term objective is to develop an integrated design-risk assessment environment for the evaluation of complex structural systems. The scope of this short presentation is to describe the design and cognition components of the research. Design has received special attention in cognitive science because it is now identified as a problem solving activity that is different from other information processing tasks (1). Before an attempt can be made to automate design, a thorough understanding of the underlying design theory and methodology is needed, since the design process is, in many cases, multi-disciplinary, complex in size and motivation, and uses various reasoning processes involving different kinds of knowledge in ways which vary from one context to another. The objective is to unify all the various types of knowledge under one framework of cognition. This presentation focuses on the cognitive science framework that we are using to represent the knowledge aspects associated with the human mind's abstraction abilities and how we apply it to the engineering knowledge and engineering reasoning in design.

  6. Experience in reactor research and development programs as educational system for thermohydraulic engineering

    International Nuclear Information System (INIS)

    Zaki, G.M.; Fikry, M.M.

    1977-01-01

    A reactor development program within a research reactor facility can be used for personnel training on the operation of power reactors and research in the different fields of nuclear science and engineering. A training program is proposed where reactor maintenance and operation, in addition to conducting development programs and executing projects, are utilized for forming specialized groups. The paper gives a short survey of a heat transfer program where out of pile and in-core studies are conducted along with two-phase flow investigations. This program covers the main requirements for WWR (water cooled and moderated reactor) power uprating and furnishes basic knowledge on power reactor thermal parameters. The major facilities for conducting similar programs devoted to education are mentioned

  7. Undergraduate Research Experiences in Geosciences for Physical Science and Engineering Students

    Science.gov (United States)

    Bililign, S.; Schimmel, K.; Lin, Y. L.; Germuth, A.

    2015-12-01

    The recruitment of undergraduate students, especially minorities, into geoscience career paths continues to be a challenge. An REU program that focused on recruiting students majoring in physical sciences and engineering from HBCU's within North Carolina started in 2012. The program offers an academic year REU for North Carolina A&T State University (NCA&T) students (8 students), summer research for non-NCA&T students (18 students), and field experiences in national labs for selected students. In this REU, the design of projects involves several faculty members (at least two from different disciplines) that expose students to interdisciplinary research approaches. The outcomes of this program, challenges, opportunities and lessons learned will be presented.

  8. Reducing the number of laboratory animals used in tissue engineering research by restricting the variety of animal models. Articular cartilage tissue engineering as a case study

    NARCIS (Netherlands)

    Vries, R.B.M. de; Buma, P.; Leenaars, M.; Ritskes-Hoitinga, M.; Gordijn, B.

    2012-01-01

    The use of laboratory animals in tissue engineering research is an important underexposed ethical issue. Several ethical questions may be raised about this use of animals. This article focuses on the possibilities of reducing the number of animals used. Given that there is considerable debate about

  9. Networking of institutions in India to promote research and education in nuclear science and engineering

    International Nuclear Information System (INIS)

    Puri, R.R.

    2007-01-01

    Full text: The Programme of Nuclear Energy and its Applications (NEA) is knowledge intensive requiring engineers and scientists having special education and training for its implementation. The paucity of manpower in managing this programme is partly due to limitations of the university system in catering to the needs of the nuclear industry. Those limitations arise due to several reasons, like, regulatory requirements which make it difficult to set up nuclear facilities in university environment, capital intensive nature of nuclear set-ups, paucity of teaching staff having hands-on experience and limited employment opportunities making nuclear option unattractive for talented youngsters. The Department of Atomic Energy of India (DAE) established in 1954 for shaping and managing the Indian NEA programme realized those limitations and opted for an in-house education and training programme leading to assured employment for young Engineering Graduates and Science Post Graduates. Called the Bhabha Atomic Research Centre (BARC) Training School Programme, it is in place since 1957. The Indian NEA programme is thus fortunate to be supported by a visionary human resource development (HRD) programme in nuclear science and technology practically right since its inception. The success of HRD programme of DAE lies in its broader outlook based on the premise that technology development and basic research go hand-in-hand. This outlook is reflected also in the way DAE has been managing the implementation of its programme in that on one hand it has set up centres for technological Research and Development and, on the other, it is providing Grant-in-Aid to several Institutes for carrying basic research. Moreover, DAE has not lost sight of the fact that success of its initiatives lies as much in the vibrant university system as in its own training and educational efforts. It has, therefore, created avenues for extra-mural funding for supporting research activities in universities in

  10. An Overview of the Literature: Research in P-12 Engineering Education

    Science.gov (United States)

    Mendoza Díaz, Noemi V.; Cox, Monica F.

    2012-01-01

    This paper presents an extensive overview of preschool to 12th grade (P-12) engineering education literature published between 2001 and 2011. Searches were conducted through education and engineering library engines and databases as well as queries in established publications in engineering education. More than 50 publications were found,…

  11. Citation Patterns of Engineering, Statistics, and Computer Science Researchers: An Internal and External Citation Analysis across Multiple Engineering Subfields

    Science.gov (United States)

    Kelly, Madeline

    2015-01-01

    This study takes a multidimensional approach to citation analysis, examining citations in multiple subfields of engineering, from both scholarly journals and doctoral dissertations. The three major goals of the study are to determine whether there are differences between citations drawn from dissertations and those drawn from journal articles; to…

  12. An alignment of the proposed research areas in a post graduate program in industrial engineering

    Directory of Open Access Journals (Sweden)

    Camila Felin Nunes

    2015-08-01

    Full Text Available Considering the organizational practices and financing of strict post-graduate studies existing in Germany this article intends to prepare an alignment proposal in the areas of research that the Postgraduate Program in Industrial Engineering from the Federal University of Santa Maria/RS (PPGEP-UFSM can adopt to stimulate regional industries to fund research on the course. Therefore, they analyzed 29 companies that are part of the Regional Development Council region and has Santa Maria/RS as county seat. Data were collected by the Registry of the Industrial Federation of Industries of Rio Grande do Sul State, Economy and Statistics Foundation and the Brazilian Institute of Geography and Statistics. To adopt a graduate of the financing model similar to that practiced in Germany, it is recommended that the PPGEP-UFSM seek greater affinity between their lines of research and production activities of regional industries. It is suggested that the program develops research in machinery compatible with that produced in the region for the production of food production technologies and also to improve the handling and processing of grain and meat, thus enabling local industries an improvement in conditions competitiveness.

  13. A critical Action Research approach to curriculum development in a laboratory-based chemical engineering course

    Science.gov (United States)

    White, Scott R.

    This dissertation is a report of an attempt to critically evaluate a novel laboratory course from within the context of a chemical engineering curriculum. The research was done in a college classroom-laboratory setting, entrenched in the everydayness of classroom activities. All of the students, instructors, and educational researchers were knowing participants in this Action Research study. The students, a mixture of juniors, seniors, & graduate students, worked together on semester-long projects in groups that were mixed by age, gender and academic level. Qualitative techniques were used to gather different forms of representations of the students and instructors' experiences. Emergent patterns from the data gave strength to emergent knowledge claims that informed the instructors and the researcher about what the students were learning about performing experimental work and communicating results with their peers and instructor. The course challenged and in some cases changed the conceptions of instruction previously held by the students and the instructors. The course did not proceed without problems, yet the majority of these problems were overcome by the design of the course. Assertions and recommendations for improvement and application to other educational contexts are suggested.

  14. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 20: Engineers as information processors: A survey of US aerospace engineering faculty and students

    Science.gov (United States)

    Holland, Maurita Peterson; Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

    1991-01-01

    U.S. aerospace engineering faculty and students were surveyed as part of the NASA/DoD Aerospace Knowledge Research Project. Faculty and students were viewed as information processors within a conceptual framework of information seeking behavior. Questionnaires were received from 275 faculty members and 640 students, which were used to determine: (1) use and importance of information sources; (2) use of specific print sources and electronic data bases; (3) use of information technology; and (4) the influence of instruction on the use of information sources and the products of faculty and students. Little evidence was found to support the belief that instruction in library or engineering information use has significant impact either on broadening the frequency or range of information products and sources used by U.S. aerospace engineering students.

  15. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 13: The information-seeking habits and practices of engineers

    Science.gov (United States)

    Pinelli, Thomas E.

    1991-01-01

    It is argued that only by maximizing the research and development process can the United States maintain and possibly capture its international competitive edge. Key to this goal is the provision of information services and products which meet the information needs of engineers. Evidence exists which indicates that traditional information services and products may, in fact, not be meeting the information needs of engineers. The primary reason for this deficiency is three fold. First, the specific information needs of engineers are neither well known nor well understood. Second, what is known about the information seeking habits and practices of engineers has not been applied to existing engineering information services. Third, the information professionals continue to over-emphasize technology instead of concentrating on the quality of the information itself and the ability of the information to meet the needs of the user.

  16. Optical rotation measurements in process control and engineering research in foods

    Energy Technology Data Exchange (ETDEWEB)

    Huerta-Ruelas, J.; Lopez-Echevarria, D.; Mendoza-Sanchez, P.; Kongraksawech, T.; Velazquez, G.; Torres, J. A.

    2008-07-01

    A system to measure optical rotation (OR) and transmitted light (TL) was built and tested by the Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada (CICATA, Mexico). A similar system was built and tested by the Food Process Engineering Group (FPEG) at Oregon State University. OR and TL values, as a function of time and sample temperature, were recorded by a data acquisition system. Sucrose (1% w/v) and distilled water were used to calibrate both instruments while sucrose solutions were used to determine sensitivity, linearity and stability. The OR of sucrose solutions was measured with less than 3% (0.03 to 20 g/100 mL) and 2% error (0.01 to 20 g/100 mL) for the FPEG and CICATA system, respectively. The instrument setup was tested at CICATA by monitoring sucrose hydrolysis and by comparing initial and final OR with published reference values. Application examples tested by FPEG were the characterization of hard candies and the fermentation monitoring of tepache, a pre hispanic alcoholic beverage consumed in Mexico and some Latin American countries. These tests confirmed the instrument versatility and the advantages of building modular units with light sources and electronic components available today at low cost. This work showed, using specific applications, that modular units for well-established optical measurements such as OR and TL could have additional applications in food process control and engineering research. (Author) 27 refs.

  17. Research-based learning for nuclear engineering education in Gadjah Mada University

    International Nuclear Information System (INIS)

    Putero, Susetyo Hario; Kusnanto; Harto, Andang Widi

    2011-01-01

    Nuclear engineering education in Gadjah Mada University has been operated since 1977 in order to prepare Indonesian people facing up nuclear era in Indonesia. Until 1995, most of the alumni work in National Nuclear Energy Board, but recently many of them have been taking advanced study abroad. To improve our quality of education, since the last 3 years Gadjah Mada University has implemented Research-Based Learning (RBL). RBL for nuclear engineering student is conducted by providing challenges to the student related to the critical issues in public acceptance of nuclear power plant (NPP) in Indonesia that is waste management. Students should join in a group to complete the assignment. Within the group, they discuss and produce new idea in order to manage radioactive waste of new generation NPP. So, they are stimulated to think the future based on the state of the art of waste technology. This method could increase student's knowledge and soft skills, simultaneously. Some students also continue to explore and to refine the task as their thesis topic. Therefore, implementation of RBL also succeeds in increasing student's efficiency study. (author)

  18. Cameco engineered tailings program: linking research with industrial processes for improved tailings performance

    International Nuclear Information System (INIS)

    Kotzer, T.; Hendry, M.J.

    2011-01-01

    The waste product from uranium mining and milling that generates the greatest public and regulatory concern is tailings. The tailings contain all of the mined material except uranium plus a host of processing reagents. These minerals and compounds have the potential to harm the local environment if not deposited in a fashion that is both geochemically and geotechnically stable. Environmental leadership impels Cameco Corporation to ensure that the methods used to dispose of tailings are at the forefront of best available technologies whereby tailings production results in a product with geotechnical and geochemical characteristics that minimize the environmental impact associated with long-term storage of this product. Cameco has developed an Engineered Tailings (ET) program to ensure optimization of long-term tailings performance and minimal impacts of elements of concern (EOCs) to the receiving environment, regardless of the ore being milled. Within this program chemical and physical performance of tailings from geochemical and geotechnical investigations and baseline environmental data, integrated with regulatory requirements and corporate commitments, will be used to evaluate and set criteria for mill- and tailings management facilities-based chemical and physical tailings characteristics, identify key knowledge gaps, prioritize areas of concern and implement appropriate responses. This paper provides an overview of the Engineered Tailings program, the research being conducted as part of the ET program, and how it links with present and future Cameco operations. (author)

  19. NATO Advanced Research Workshop on The Design of Mathematical Modelling Courses for Engineering Education

    CERN Document Server

    Moscardini, Alfredo

    1994-01-01

    As the role of the modern engineer is markedly different from that of even a decade ago, the theme of engineering mathematics educa­ tion (EME) is an important one. The need for mathematical model­ ling (MM) courses and consideration of the educational impact of computer-based technology environments merit special attention. This book contains the proceeding of the NATO Advanced Research Workshop held on this theme in July 1993. We have left the industrial age behind and have entered the in­ formation age. Computers and other emerging technologies are penetrating society in depth and gaining a strong influence in de­ termining how in future society will be organised, while the rapid change of information requires a more qualified work force. This work force is vital to high technology and economic competitive­ ness in many industrialised countries throughout the world. Within this framework, the quality of EME has become an issue. It is expected that the content of mathematics courses taught in schools o...

  20. Anomia treatment platform as behavioral engine for use in research on physiological adjuvants to neurorehabilitation.

    Science.gov (United States)

    Kendall, Diane; Raymer, Anastasia; Rose, Miranda; Gilbert, JoEllen; Gonzalez Rothi, Leslie J

    2014-01-01

    The purpose of this study was to create a "behavioral treatment engine" for future use in research on physiological adjuvants in aphasia rehabilitation. We chose the behavioral target anomia, which is a feature displayed by many persons who have aphasia. Further, we wished to saturate the treatment approach with many strategies and cues that have been empirically reported to have a positive influence on aphasia outcome, with the goal being to optimize the potential for positive response in most participants. A single-subject multiple baseline design with replication across eight participants was employed. Four men and four women, with an average age of 62 yr and an average of 63.13 mo poststroke onset, served as participants. Word-retrieval treatment was administered 3 d/wk, 1 h/d for a total of 20 treatment hours (6-7 wk). Positive acquisition effects were evident in all eight participants (d effect size [ES] = 5.40). Treatment effects were maintained 3 mo after treatment termination for five participants (d ES = 2.94). Within and across semantic category, generalization was minimal (d ES = 0.43 within and 1.09 across). This study demonstrates that this behavioral treatment engine provides a solid platform on which to base future studies whereby various treatment conditions are manipulated and pharmacologic support is added.