Integrated Biosphere Simulator Model (IBIS), Version 2.5

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: The Integrated Biosphere Simulator (or IBIS) is designed to be a comprehensive model of the terrestrial biosphere. Tthe model represents a wide range of...

Use of midlatitude soil moisture and meteorological observations to validate soil moisture simulations with biosphere and bucket models

Science.gov (United States)

Robock, Alan; Vinnikov, Konstantin YA.; Schlosser, C. Adam; Speranskaya, Nina A.; Xue, Yongkang

1995-01-01

Soil moisture observations in sites with natural vegetation were made for several decades in the former Soviet Union at hundreds of stations. In this paper, the authors use data from six of these stations from different climatic regimes, along with ancillary meteorological and actinometric data, to demonstrate a method to validate soil moisture simulations with biosphere and bucket models. Some early and current general circulation models (GCMs) use bucket models for soil hydrology calculations. More recently, the Simple Biosphere Model (SiB) was developed to incorporate the effects of vegetation on fluxes of moisture, momentum, and energy at the earth's surface into soil hydrology models. Until now, the bucket and SiB have been verified by comparison with actual soil moisture data only on a limited basis. In this study, a Simplified SiB (SSiB) soil hydrology model and a 15-cm bucket model are forced by observed meteorological and actinometric data every 3 h for 6-yr simulations at the six stations. The model calculations of soil moisture are compared to observations of soil moisture, literally 'ground truth,' snow cover, surface albedo, and net radiation, and with each other. For three of the stations, the SSiB and 15-cm bucket models produce good simulations of seasonal cycles and interannual variations of soil moisture. For the other three stations, there are large errors in the simulations by both models. Inconsistencies in specification of field capacity may be partly responsible. There is no evidence that the SSiB simulations are superior in simulating soil moisture variations. In fact, the models are quite similar since SSiB implicitly has a bucket embedded in it. One of the main differences between the models is in the treatment of runoff due to melting snow in the spring -- SSiB incorrectly puts all the snowmelt into runoff. While producing similar soil moisture simulations, the models produce very different surface latent and sensible heat fluxes, which

The Impact of Prior Biosphere Models in the Inversion of Global Terrestrial CO2 Fluxes by Assimilating OCO-2 Retrievals

Science.gov (United States)

Philip, Sajeev; Johnson, Matthew S.

2018-01-01

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emissions and biospheric fluxes. The processes controlling terrestrial biosphere-atmosphere carbon exchange are currently not fully understood, resulting in terrestrial biospheric models having significant differences in the quantification of biospheric CO2 fluxes. Atmospheric transport models assimilating measured (in situ or space-borne) CO2 concentrations to estimate "top-down" fluxes, generally use these biospheric CO2 fluxes as a priori information. Most of the flux inversion estimates result in substantially different spatio-temporal posteriori estimates of regional and global biospheric CO2 fluxes. The Orbiting Carbon Observatory 2 (OCO-2) satellite mission dedicated to accurately measure column CO2 (XCO2) allows for an improved understanding of global biospheric CO2 fluxes. OCO-2 provides much-needed CO2 observations in data-limited regions facilitating better global and regional estimates of "top-down" CO2 fluxes through inversion model simulations. The specific objectives of our research are to: 1) conduct GEOS-Chem 4D-Var assimilation of OCO-2 observations, using several state-of-the-science biospheric CO2 flux models as a priori information, to better constrain terrestrial CO2 fluxes, and 2) quantify the impact of different biospheric model prior fluxes on OCO-2-assimilated a posteriori CO2 flux estimates. Here we present our assessment of the importance of these a priori fluxes by conducting Observing System Simulation Experiments (OSSE) using simulated OCO-2 observations with known "true" fluxes.

Superconducting state in (W, Ta)5SiB2

Science.gov (United States)

Fukuma, M.; Kawashima, K.; Akimitsu, J.

We characterize the superconducting state in a boro-silicide (W, Ta)5SiB2, with Tc of 6.5 K by means of magnetization, electrical resistivity, and specific heat measurements. As x increased, the transition temperature Tc abruptly enhances from 5.8 to 6.5 K. The magnetization versus magnetic field (M-H) curve indicated that (W, Ta)5SiB2 was a conventional type-II superconductor. The estimated lower critical field Hc1(0) and upper critical field Hc2(T) are about 121 Oe and 14.7 kOe, respectively. The penetration depth λ(0) and coherence length ξ(0) are calculated to be approximately 369 and 14.9 nm, respectively, using Ginzburg-Landau (GL) equations. Specific heat data shows the superconductivity in W4.5Ta0.5SiB2 belongs to a week-coupling BCS superconductor. Finally, we discuss the increasing of Tc in of (W, Ta)5SiB2 system.

Characteristics of the Receptor for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M.A.; Rautenstrauch, K.R.

2003-01-01

biosphere model and are reflected in the TSPA through the biosphere dose conversion factors (BDCFs). The analysis was performed in accordance with the TWP (BSC 2003). This analysis supports the treatment of fourteen features, events, and processes (FEPs) applicable to the reference biosphere (DTN: MO0303SEPFEPS2.000) and addressed in the biosphere model (BSC 2003). The treatment of these FEPs in the biosphere model is described in the ''Biosphere Model Report'' (BSC 2003, Section 6.2). The parameters developed in this report and the related FEPs are listed in Table 1-1

Biospheric theory and report on overall Biosphere 2 design and performance.

Science.gov (United States)

Allen, J

1997-01-01

This article reviews the structural complexity of Biospheres as well as Vernadsky's two laws of biospherics generalized into laws of thermodynamics. The history of designing and building apparatuses to test biospheric hypothesis are summarized: Drs. Shepelev and Gitelson's experiments in Russia, and Space Biospheres Ventures' 10,974 ft3 Test Module and 3.15-acre Biosphere 2 systems. Critical parameters in building Biosphere 2 are outlined: species lists, state descriptors, ecosystems, key variables, closure, and the necessity of observer-managers. Some results of the 2-year Mission One experiment in Biosphere 2 are summarized: human health, light-CO2 coupling, food production, redundancy in maintenance. Change made to the Biosphere 2 system after the first 2-year mission and before the start-up of the second mission are listed. As well, the future of artificial biospheres is considered.

Characteristics of the Receptor for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek; K.R. Rautenstrauch

2003-06-27

developed in this report support the biosphere model and are reflected in the TSPA through the biosphere dose conversion factors (BDCFs). The analysis was performed in accordance with the TWP (BSC 2003). This analysis supports the treatment of fourteen features, events, and processes (FEPs) applicable to the reference biosphere (DTN: MO0303SEPFEPS2.000) and addressed in the biosphere model (BSC 2003). The treatment of these FEPs in the biosphere model is described in the ''Biosphere Model Report'' (BSC 2003, Section 6.2). The parameters developed in this report and the related FEPs are listed in Table 1-1.

Environmental Transport Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-06-27

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699

Environmental Transport Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M. A.

2003-01-01

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699], Section 6.2). Parameter values

Work in support of biosphere assessments for solid radioactive waste disposal. 2. biosphere FEP list and biosphere modelling

Energy Technology Data Exchange (ETDEWEB)

Egan, M J; Maul, P R; Watkins, B M; Venter, A [QuantiSci Ltd., Henley-on-Thames (United Kingdom)

2001-10-01

In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB's post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent biosphere in preparation for the examination of the revised SFR safety case. This report documents the model development that has been undertaken by QuantiSci using the Amber computer code.

Work in support of biosphere assessments for solid radioactive waste disposal. 2. biosphere FEP list and biosphere modelling

International Nuclear Information System (INIS)

Egan, M.J.; Maul, P.R.; Watkins, B.M.; Venter, A.

2001-10-01

In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB's post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent biosphere in preparation for the examination of the revised SFR safety case. This report documents the model development that has been undertaken by QuantiSci using the Amber computer code

Improving the Amazonian Hydrologic Cycle in a Coupled Land-Atmosphere, Single Column Model

Science.gov (United States)

Harper, A. B.; Denning, S.; Baker, I.; Prihodko, L.; Branson, M.

2006-12-01

We have coupled a land-surface model, the Simple Biosphere Model (SiB3), to a single column of the Colorado State University General Circulation Model (CSU-GCM) in the Amazon River Basin. This is a preliminary step in the broader goal of improved simulation of Basin-wide hydrology. A previous version of the coupled model (SiB2) showed drought and catastrophic dieback of the Amazon rain forest. SiB3 includes updated soil hydrology and root physiology. Our test area for the coupled single column model is near Santarem, Brazil, where measurements from the km 83 flux tower in the Tapajos National Forest can be used to evaluate model output. The model was run for 2001 using NCEP2 Reanalysis as driver data. Preliminary results show that the updated biosphere model coupled to the GCM produces improved simulations of the seasonal cycle of surface water balance and precipitation. Comparisons of the diurnal and seasonal cycles of surface fluxes are also being made.

Work in support of biosphere assessments for solid radioactive waste disposal. 2. biosphere FEP list and biosphere modelling

Energy Technology Data Exchange (ETDEWEB)

Egan, M.J.; Maul, P.R.; Watkins, B.M.; Venter, A. [QuantiSci Ltd., Henley-on-Thames (United Kingdom)

2001-10-01

In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB's post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent biosphere in preparation for the examination of the revised SFR safety case. This report documents the model development that has been undertaken by QuantiSci using the Amber computer code.

A terrestrial biosphere model optimized to atmospheric CO2 concentration and above ground woody biomass

Science.gov (United States)

Saito, M.; Ito, A.; Maksyutov, S. S.

2013-12-01

This study documents an optimization of a prognostic biosphere model (VISIT; Vegetation Integrative Similator for Trace gases) to observations of atmospheric CO2 concentration and above ground woody biomass by using a Bayesian inversion method combined with an atmospheric tracer transport model (NIES-TM; National Institute for Environmental Studies / Frontier Research Center for Global Change (NIES/FRCGC) off-line global atmospheric tracer transport model). The assimilated observations include 74 station records of surface atmospheric CO2 concentration and aggregated grid data sets of above ground woody biomass (AGB) and net primary productivity (NPP) over the globe. Both the biosphere model and the atmospheric transport model are used at a horizontal resolution of 2.5 deg x 2.5 deg grid with temporal resolutions of a day and an hour, respectively. The atmospheric transport model simulates atmospheric CO2 concentration with nine vertical levels using daily net ecosystem CO2 exchange rate (NEE) from the biosphere model, oceanic CO2 flux, and fossil fuel emission inventory. The models are driven by meteorological data from JRA-25 (Japanese 25-year ReAnalysis) and JCDAS (JMA Climate Data Assimilation System). Statistically optimum physiological parameters in the biosphere model are found by iterative minimization of the corresponding Bayesian cost function. We select thirteen physiological parameter with high sensitivity to NEE, NPP, and AGB for the minimization. Given the optimized physiological parameters, the model shows error reductions in seasonal variation of the CO2 concentrations especially in the northern hemisphere due to abundant observation stations, while errors remain at a few stations that are located in coastal coastal area and stations in the southern hemisphere. The model also produces moderate estimates of the mean magnitudes and probability distributions in AGB and NPP for each biome. However, the model fails in the simulation of the terrestrial

Biosphere modeling for HLW disposal in Japan

International Nuclear Information System (INIS)

Naito, Morimasa

2001-01-01

Concept of Reference Biosphere is defined by 'the set of assumptions and hypotheses that is necessary to provide a consistent basis for calculations of the radiological impact arising from long-term releases of repository-derived radionuclides into the biosphere'. Geological environment and biosphere interface (GBI) is the place having the high probability of introduction of radioactive nuclides to biosphere by groundwater. Reference biosphere methodology, GBI, basic models, assessment context, assumptions concerning the surface environment for the biosphere assessment, nuclides migration process, interaction matrix showing radionuclide transport pathways for biosphere modeling, conceptual model for exposure modes and pathways for each exposure group in the biosphere assessment are explained. Response of the biosphere assessment model is steady, unit flux input (1 Bq/y) of different nuclides (farming exposure group). The dose per unit input of agriculture group is 1 to 3 figures larger than that of other two fisheries groups in the case of river and coastal environment except Po-210. We can calculate easily the dose by determining the dose conversion factors derived from different GBI models. Comparison of flux to dose conversion factors derived from different GBI models is effective to know the properties of each model, process and importance of data. (S.Y.)

The Legacy of Biosphere 2 for Biospherics and Closed Ecological System Research

Science.gov (United States)

Allen, J.; Alling, A.; Nelson, M.

The unprecedented challenges of creating Biosphere 2, the world's first laboratory for biospherics, the study of global ecology and long-term closed ecological system dynamics led to breakthrough developments in many fields, and a deeper understanding of the opportunities and difficulties of material closure. This paper will review these accomplishments and challenges, citing some of the key research accomplishments and publications which have resulted from the experiments in Biosphere 2. Engineering accomplishments included development of a technique for variable volume to deal with pressure differences between the facility and outside environment, developing methods of leak detection and sealing, and achieving new standards of closure, with an annual atmospheric leakrate of less than 10%, or less than 300 ppm per day. This degree of closure permitted detailed tracking of carbon dioxide, oxygen, and trace gases such as nitrous oxide and ethylene over the seasonal variability of two years. Full closure also necessitated developing new approaches and technologies for complete air, water, and wastewater recycle and reuse within the facility. The development of a soil-based highly productive agricultural system was a first in closed ecological systems, and much was learned about managing a wide variety of crops using non-chemical means of pest and disease control. Closed ecological systems have different temporal b ogeochemical cycling and ranges ofi atmospheric components because of their smaller reservoirs of air, water and soil, and higher concentration of biomass, and Biosphere 2 provided detailed examination and modeling of these accelerated cycles over a period of closure which measured in years. Medical research inside Biosphere 2 included the effects on humans of lowered oxygen: the discovery that human productivity can be maintained down to 15% oxygen could lead to major economies on the design of space stations and planetary/lunar settlements. The improved

Modeling the global society-biosphere-climate system : Part 2: Computed scenarios

NARCIS (Netherlands)

Alcamo, J.; Van Den Born, G.J.; Bouwman, A.F.; De Haan, B.J.; Klein Goldewijk, K.; Klepper, O.; Krabec, J.; Leemans, R.; Olivier, J.G.J.; Toet, A.M.C.; De Vries, H.J.M.; Van Der Woerd, H.J.

1994-01-01

This paper presents scenarios computed with IMAGE 2.0, an integrated model of the global environment and climate change. Results are presented for selected aspects of the society-biosphere-climate system including primary energy consumption, emissions of various greenhouse gases, atmospheric

Optimization of a prognostic biosphere model for terrestrial biomass and atmospheric CO2 variability

International Nuclear Information System (INIS)

Saito, M.; Ito, A.; Maksyutov, S.

2014-01-01

This study investigates the capacity of a prognostic biosphere model to simulate global variability in atmospheric CO 2 concentrations and vegetation carbon dynamics under current environmental conditions. Global data sets of atmospheric CO 2 concentrations, above-ground biomass (AGB), and net primary productivity (NPP) in terrestrial vegetation were assimilated into the biosphere model using an inverse modeling method combined with an atmospheric transport model. In this process, the optimal physiological parameters of the biosphere model were estimated by minimizing the misfit between observed and modeled values, and parameters were generated to characterize various biome types. Results obtained using the model with the optimized parameters correspond to the observed seasonal variations in CO 2 concentration and their annual amplitudes in both the Northern and Southern Hemispheres. In simulating the mean annual AGB and NPP, the model shows improvements in estimating the mean magnitudes and probability distributions for each biome, as compared with results obtained using prior simulation parameters. However, the model is less efficient in its simulation of AGB for forest type biomes. This misfit suggests that more accurate values of input parameters, specifically, grid mean AGB values and seasonal variabilities in physiological parameters, are required to improve the performance of the simulation model. (authors)

Environmental Transport Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573])

Environmental Transport Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-10

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis

The legacy of Biosphere 2 for the study of biospherics and closed ecological systems.

Science.gov (United States)

Allen, J P; Nelson, M; Alling, A

2003-01-01

The unprecedented challenges of creating Biosphere 2, the world's first laboratory for biospherics, the study of global ecology and long-term closed ecological system dynamics, led to breakthrough developments in many fields, and a deeper understanding of the opportunities and difficulties of material closure. This paper will review accomplishments and challenges, citing some of the key research findings and publications that have resulted from the experiments in Biosphere 2. Engineering accomplishments included development of a technique for variable volume to deal with pressure differences between the facility and outside environment, developing methods of atmospheric leak detection and sealing, while achieving new standards of closure, with an annual atmospheric leakrate of less than 10%, or less than 300 ppm per day. This degree of closure permitted detailed tracking of carbon dioxide, oxygen, and trace gases such as nitrous oxide and ethylene over the seasonal variability of two years. Full closure also necessitated developing new approaches and technologies for complete air, water, and wastewater recycle and reuse within the facility. The development of a soil-based highly productive agricultural system was a first in closed ecological systems, and much was learned about managing a wide variety of crops using non-chemical means of pest and disease control. Closed ecological systems have different temporal biogeochemical cycling and ranges of atmospheric components because of their smaller reservoirs of air, water and soil, and higher concentration of biomass, and Biosphere 2 provided detailed examination and modeling of these accelerated cycles over a period of closure which measured in years. Medical research inside Biosphere 2 included the effects on humans of lowered oxygen: the discovery that human productivity can be maintained with good health with lowered atmospheric oxygen levels could lead to major economies on the design of space stations and

The legacy of biosphere 2 for the study of biospherics and closed ecological systems

Science.gov (United States)

Allen, J. P.; Nelson, M.; Alling, A.

The unprecedented challenges of creating Biosphere 2, the world's first laboratory for biospherics, the study of global ecology and long-term closed ecological system dynamics, led to breakthrough developments in many fields, and a deeper understanding of the opportunities and difficulties of material closure. This paper will review accomplishments and challenges, citing some of the key research findings and publications that have resulted from the experiments in Biosphere 2. Engineering accomplishments included development of a technique for variable volume to deal with pressure differences between the facility and outside environment, developing methods of atmospheric leak detection and sealing, while achieving new standards of closure, with an annual atmospheric leakrate of less than 10%, or less than 300 ppm per day. This degree of closure permitted detailed tracking of carbon dioxide, oxygen, and trice gases such as nitrous oxide and ethylene over the seasonal variability of two years. Full closure also necessitated developing new approaches and technologies for complete air, water, and wastewater recycle and reuse within the facility. The development of a soil-based highly productive agricultural system was a first in closed ecological systems, and much was learned about managing a wide variety of crops using non-chemical means of pest and disease control. Closed ecological systems have different temporal biogeochemical cycling and ranges of atmospheric components because of their smaller reservoirs of air, water and soil, and higher concentration of biomass, and Biosphere 2 provided detailed examination and modeling of these accelerated cycles over a period of closure which measured in years. Medical research inside Biosphere 2 included the effects on humans of lowered oxygen: the discovery that human productivity can be maintained with good health with lowered atmospheric oxygen levels could lead to major economies on the design of space stations and

Soil-Related Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Smith, A. J.

2004-01-01

analysis revises the previous version with the same name (BSC 2003 [DIRS 161239]), which was itself a revision of one titled ''Evaluate Soil/Radionuclide Removal by Erosion and Leaching'' (CRWMS M and O 2001 [DIRS 152517]). In Revision 00 of this report, the data generated were fixed values (i.e., taking no account of uncertainty and variability). Revision 01 (BSC 2003 [DIRS 161239]) incorporated uncertainty and variability into the values for the bulk density, elemental partition coefficients, average annual loss of soil from erosion, resuspension enhancement factor, and field capacity water content. The current revision of this document improves the transparency and traceability of the products without changing the details of the analysis. This analysis report supports the treatment of six of the features, events, and processes (FEPs) applicable to the Yucca Mountain reference biosphere (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The use of the more recent FEP list in DTN: MO0407SEPFEPLA.000 [DIRS 170760] represents a deviation from the detail provided in the TWP (BSC 2004 [DIRS 169573]), which referenced a previous version of the FEP list. The parameters developed in this report support treatment of these six FEPs addressed in the biosphere model that are listed in Table 1-1. Inclusion and treatment of FEPs in the biosphere model is described in the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460], Section 6.2)

Inhalation Exposure Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

K. Rautenstrauch

2004-09-10

This analysis is one of 10 reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. Inhalation Exposure Input Parameters for the Biosphere Model is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the Technical Work Plan for Biosphere Modeling and Expert Support (BSC 2004 [DIRS 169573]). This analysis report defines and justifies values of mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception.

Inhalation Exposure Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

K. Rautenstrauch

2004-01-01

This analysis is one of 10 reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. Inhalation Exposure Input Parameters for the Biosphere Model is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the Technical Work Plan for Biosphere Modeling and Expert Support (BSC 2004 [DIRS 169573]). This analysis report defines and justifies values of mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception

Inhalation Exposure Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2006-06-05

This analysis is one of the technical reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), referred to in this report as the biosphere model. ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. ''Inhalation Exposure Input Parameters for the Biosphere Model'' is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1 (based on BSC 2006 [DIRS 176938]). This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and how this analysis report contributes to biosphere modeling. This analysis report defines and justifies values of atmospheric mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of the biosphere model to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception. This

Inhalation Exposure Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek

2006-01-01

This analysis is one of the technical reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), referred to in this report as the biosphere model. ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. ''Inhalation Exposure Input Parameters for the Biosphere Model'' is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1 (based on BSC 2006 [DIRS 176938]). This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and how this analysis report contributes to biosphere modeling. This analysis report defines and justifies values of atmospheric mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of the biosphere model to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception. This report is concerned primarily with the

Biosphere models for deep waste disposal

International Nuclear Information System (INIS)

Olyslaegers, G.

2005-01-01

The management of the radioactive waste requires the implementation of disposal systems that ensure an adequate degree of isolation of the radioactivity from man and the environment. Because there are still a lot of uncertainties and a lack of consensus with respect to the importance of the exposure pathways of man, a project BioMoSA (Biosphere Models for Safety Assessment) was elaborated in the Fifth Framework Programme of EURATOM). It aimed at improving the scientific basis for the application of biosphere models in the framework of long-term safety studies for radioactive waste disposal facilities. The section radiological evaluations of SCK-CEN took part in the BioMoSA project. n the BioMoSA project, the reference biosphere methodology developed in the IAEA programme BIOMASS (Biosphere Modelling and Assessment methods) is implemented). We used this methodology in order to increase the transparency of biosphere modelling; t evaluate the importance of the different radionuclides and pathways, and to enhance public confidence in the assessment of potential radiological dose to population groups far into the future. Five European locations, covering a wide range of environmental and agricultural conditions are described and characterised. Each participant developed a specific biosphere model for their site. In order to achieve a consistency in this model derivation, a staged approach has been followed. Successively the biosphere is described and conceptual, mathematical and numerical models are constructed. For each of the locations site-specific parameters are selected. In the project, we had the specific task to make a comparison between the model results generated by the different participants. Results from these studies are presented and discussed

Soil-Related Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

A. J. Smith

2004-09-09

was defined as AP-SIII.9Q, ''Scientific Analyses''. This analysis revises the previous version with the same name (BSC 2003 [DIRS 161239]), which was itself a revision of one titled ''Evaluate Soil/Radionuclide Removal by Erosion and Leaching'' (CRWMS M&O 2001 [DIRS 152517]). In Revision 00 of this report, the data generated were fixed values (i.e., taking no account of uncertainty and variability). Revision 01 (BSC 2003 [DIRS 161239]) incorporated uncertainty and variability into the values for the bulk density, elemental partition coefficients, average annual loss of soil from erosion, resuspension enhancement factor, and field capacity water content. The current revision of this document improves the transparency and traceability of the products without changing the details of the analysis. This analysis report supports the treatment of six of the features, events, and processes (FEPs) applicable to the Yucca Mountain reference biosphere (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The use of the more recent FEP list in DTN: MO0407SEPFEPLA.000 [DIRS 170760] represents a deviation from the detail provided in the TWP (BSC 2004 [DIRS 169573]), which referenced a previous version of the FEP list. The parameters developed in this report support treatment of these six FEPs addressed in the biosphere model that are listed in Table 1-1. Inclusion and treatment of FEPs in the biosphere model is described in the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460], Section 6.2).

Alternative biosphere modeling for safety assessment of HLW disposal taking account of geosphere-biosphere interface of marine environment

International Nuclear Information System (INIS)

Kato, Tomoko; Ishiguro, Katsuhiko; Naito, Morimasa; Ikeda, Takao; Little, Richard

2001-03-01

In the safety assessment of a high-level radioactive waste (HLW) disposal system, it is required to estimate radiological impacts on future human beings arising from potential radionuclide releases from a deep repository into the surface environment. In order to estimated the impacts, a biosphere model is developed by reasonably assuming radionuclide migration processes in the surface environment and relevant human lifestyles. It is important to modify the present biosphere models or to develop alternative biosphere models applying the biosphere models according to quality and quantify of the information acquired through the siting process for constructing the repository. In this study, alternative biosphere models were developed taking geosphere-biosphere interface of marine environment into account. Moreover, the flux to dose conversion factors calculated by these alternative biosphere models was compared with those by the present basic biosphere models. (author)

Characteristics of the Receptor for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek; K. Rautenstrauch

2004-01-01

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 156605], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 156605]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with AP-SIII.9Q, ''Scientific Analyses'', and the technical work plan (BSC 2004 [DIRS 169573])

Biosphere2 and Earthbuzz

Science.gov (United States)

Washburne, J. C.

2009-12-01

In an attempt to reach a broader audience, Biosphere 2, near Tucson, AZ, is participating in a network of science centers thanks to new funding through the Science Museum of Minnesota (SMM) and the National Center for Earth System Dynamics (NCED). Each of these centers will be tied together through an Earthbuzz kiosk, basically a networked web site that allows visitors to learn more about the work of leading local scientists in a very personal and captivating format. Content is currently being developed by Biosphere 2 researchers, staff, and graduate students that range from a public question and answer forum called “Scientist on the Spot” to science blogs by Biosphere 2 Fellows. It is hoped that this project will help educate the public about the Anthropocene, that is, the current geologic period that is so greatly affected by humankind’s impact on the health of the planet. Biosphere 2 provides a unique location to engage the public in this conversation for several reasons. First, no other destination on Earth gives the public such a physical immersion into what climate change might mean as does Biosphere 2. On the regular walking tour, visitors are guided through scaled down versions of an African savannah, a semi-arid thorn scrub, a coastal fog desert and a tropical rainforest. Digital displays of temperature and humidity confirm what your body is feeling - conditions ranging from desert aridity to tropical humidity. As one passes through the biomes of Biosphere 2, climate change is a whole body experience. Second, Biosphere 2 is also an active ecological research site - part of a unique network of sites run by the University of Arizona that allow scientists to study ecosystem processes across a range of scales - from microscopic root studies to studies encompassing large watersheds. In particular, a group of researchers is studying why large stands of pinion-juniper forests across the southwest have died in recent years. Biosphere2’s role in this

In vivo pharmacological characterization of (+/-)-4-[2-(1-methyl-2-pyrrolidinyl)ethyl]thiophenol hydrochloride (SIB-1553A), a novel cholinergic ligand: microdialysis studies.

Science.gov (United States)

Rao, Tadimeti S; Reid, Richard T; Correa, Lucia D; Santori, Emily M; Gardner, Michael F; Sacaan, Aida I; Lorrain, Daniel; Vernier, Jean-Michel

2003-10-03

SIB-1553A ((+/-)-4-[2-(1-methyl-2-pyrrolidinyl)ethyl]thiophenol HCl) is a neuronal nicotinic acetylcholine receptor (nAChR) ligand which is active in rodent and primate models of cognition. In functional assays, SIB-1553A exhibits marked subtype selectivity for nAChRs as compared to nicotine. In addition SIB-1553A also exhibits affinities to histaminergic (H3) and serotonergic (5-HT1 and 5HT2) receptors and sigma binding sites. In the present investigation, we characterized SIB-1553A-induced neurotransmitter release in vivo. Following subcutaneous injection (s.c., 10 mg/kg), SIB-1553A rapidly entered the brain achieving concentration of approximately 20 microM 15 min post-injection and was eliminated from plasma with a terminal half-life of approximately 32 min. In freely moving rats, SIB-1553A (1-40 mg/kg, s.c.), markedly increased ACh release in the hippocampus and prefrontal cortex. In both regions, the magnitude of SIB-1553A-induced ACh release was greater than that seen with the prototypical nAChR agonist, nicotine (0.4 mg/kg, s.c.). Both isomers of SIB-1553A induced similar levels of increase in hippocampal ACh release. Increased hippocampal ACh release was also observed following oral administration of SIB-1553A (40 mg/kg) or after local perfusion into the hippocampus (1 mM). SIB-1553A-induced hippocampal ACh release was significantly attenuated by two nAChR antagonists, mecamylamine (MEC) and dihydro-beta-erythroidine (DHbetaE), and by the dopamine (DA) (D1) antagonist, SCH-23390, arguing that ACh release, in part, involves activation of nAChRs and a permissive DA synapse. In contrast to its robust effects on ACh release, SIB-1553A (40 mg/kg, s.c.) modestly increased striatal DA release (approximately 180% of baseline). Due to the proposed role of cholinergic pathways in learning and memory, the neurochemical profile of SIB-1553A suggests a potential for it to treat cognitive dysfunction.

Inhalation Exposure Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. A. Wasiolek

2003-01-01

This analysis is one of the nine reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2003a) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents a set of input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for a Yucca Mountain repository. This report, ''Inhalation Exposure Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003b). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available at that time. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this analysis report. This analysis report defines and justifies values of mass loading, which is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Measurements of mass loading are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air surrounding crops and concentrations in air inhaled by a receptor. Concentrations in air to which the

Characteristics of the Receptor for the Biosphere Model

International Nuclear Information System (INIS)

M.A. Wasiolek

2005-01-01

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2005 [DIRS 172782]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 173164], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 173164]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with LP-SIII.9Q-BSC, ''Scientific Analyses'', and the technical work plan (BSC 2005 [DIRS 172782]). The scope of the revision was

'Reference Biospheres' for solid radioactive waste disposal. Report of BIOMASS Theme 1 of the BIOsphere Modelling and ASSessment (BIOMASS) Programme. Part of the IAEA Co-ordinated Research Project on Biosphere Modelling and Assessment (BIOMASS)

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The IAEA Programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in Vienna in October 1996. The programme was concerned with developing and improving capabilities to predict the transfer of radionuclides in the environment. The programme had three themes: Theme 1: Radioactive Waste Disposal. The objective was to develop the concept of a standard or reference biosphere for application to the assessment of the long-term safety of repositories for radioactive waste. Under the general heading of 'Reference Biospheres', six Task Groups were established: Task Group 1: Principles for the Definition of Critical and Other Exposure Groups. Task Group 2: Principles for the Application of Data to Assessment Models. Task Group 3: Consideration of Alternative Assessment Contexts. Task Group 4: Biosphere System Identification and Justification. Task Group 5: Biosphere System Descriptions. Task Group 6: Model Development. Theme 2: Environmental Releases. BIOMASS provided an international forum for activities aimed at increasing the confidence in methods and models for the assessment of radiation exposure related to environmental releases. Two Working Groups addressed issues concerned with the reconstruction of radiation doses received by people from past releases of radionuclides to the environment and the evaluation of the efficacy of remedial measures. Theme 3: Biosphere Processes. The aim of this Theme was to improve capabilities for modelling the transfer of radionuclides in particular parts of the biosphere identified as being of potential radiological significance and where there were gaps in modelling approaches. This topic was explored using a range of methods including reviews of the literature, model inter-comparison exercises and, where possible, model testing against independent sources of data. Three Working Groups were established to examine the modelling of: (1) long term tritium dispersion in the environment; (2) radionuclide uptake by fruits; and (3

Characteristics of the Receptor for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek; K. Rautenstrauch

2004-09-09

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 156605], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 156605]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with AP-SIII.9Q, ''Scientific Analyses'', and the technical work

Soil-related Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

A. J. Smith

2003-01-01

This analysis is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003 [163602]). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. ''The Biosphere Model Report'' (BSC 2003 [160699]) describes in detail the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis was to develop the biosphere model parameters needed to evaluate doses from pathways associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation and ash

Inhalation Exposure Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-09-24

This analysis is one of the nine reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2003a) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents a set of input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for a Yucca Mountain repository. This report, ''Inhalation Exposure Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003b). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available at that time. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this analysis report. This analysis report defines and justifies values of mass loading, which is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Measurements of mass loading are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air surrounding crops and concentrations in air

In vitro pharmacological characterization of (+/-)-4-[2-(1-methyl-2-pyrrolidinyl)ethyl]thio]phenol hydrochloride (SIB-1553A), a nicotinic acetylcholine receptor ligand.

Science.gov (United States)

Rao, Tadimeti S; Adams, Pamala B; Correa, Lucia D; Santori, Emily M; Sacaan, Aida I; Reid, Richard T; Suto, Carla M; Vernier, Jean Michel

2003-08-15

SIB-1553A ((+/-)-4-[2-(1-methyl-2-pyrrolidinyl)ethyl]thio]phenol HCl) is a neuronal nicotinic acetylcholine receptor (nAChR) ligand which displaced the binding of [3H]nicotine (NIC) to the rat brain nAChRs with an IC(50) value of 110 nM with no appreciable affinity to the alpha7 nAhRs. SIB-1553A showed modest affinity for histaminergic (H3) and serotonergic (5-HT1 and 5-HT2) receptors, and sigma binding sites. In calcium flux assays, SIB-1553A (0.1-5 microM), in contrast to nicotine, showed a greater selectivity for beta4-subunit containing recombinant hnAChRs (alpha2beta4, alpha3beta4 and alpha4beta4) vs. beta2-subunit containing nAChRs (alpha4beta2 and alpha3beta2) both in terms of efficacy and potency. While NIC (10-30 microM) and epibatidine (0.01-0.1 microM) fully activated human muscle-type AChRs expressed by RD cell line, SIB-1553A was virtually ineffective for up to >100 microM and elicited less than 10% of the response due to suberyldicholine. SIB-1553A (< or =30 microM) evoked [3H]DA release from striatum, olfactory tubercles and prefrontal cortex (PFC), and [3H]NE release from hippocampus and PFC, and this evoked release was sensitive to mecamylamine (MEC). SIB-1553A-evoked neurotransmitter release exhibited region- and transmitter-specific antagonism by dehydro-beta-erythroidine (DHbetaE). SIB-1553A was less efficacious than NIC at evoking [3H]NE from the rat hippocampus and antagonized NIC response upon co-application implying partial agonist properties. SIB-1553A did not evoke basal [3H]ACh release from the rat striatum or hippocampus, but attenuated NMDA-evoked [3H]ACh release from the rat striatum. SIB-1553A did not inhibit rat brain cholinesterase for up to 1 mM. Multiple receptor affinities and release of several neurotransmitters may underlie the cognitive-enhancing effects of SIB-1553A documented in rodent and primate models.

Agricultural and Environmental Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Kaylie Rasmuson; Kurt Rautenstrauch

2003-01-01

This analysis is one of nine technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. It documents input parameters for the biosphere model, and supports the use of the model to develop Biosphere Dose Conversion Factors (BDCF). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in the biosphere Technical Work Plan (TWP, BSC 2003a). It should be noted that some documents identified in Figure 1-1 may be under development and therefore not available at the time this document is issued. The ''Biosphere Model Report'' (BSC 2003b) describes the ERMYN and its input parameters. This analysis report, ANL-MGR-MD-000006, ''Agricultural and Environmental Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. This report defines and justifies values for twelve parameters required in the biosphere model. These parameters are related to use of contaminated groundwater to grow crops. The parameter values recommended in this report are used in the soil, plant, and carbon-14 submodels of the ERMYN

Characteristics of the Receptor for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek

2005-04-05

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2005 [DIRS 172782]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 173164], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 173164]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with LP-SIII.9Q-BSC, ''Scientific Analyses'', and the technical work

Biosphere 2: The True Story.

Science.gov (United States)

O'Keeffe, Michael

1992-01-01

Discusses the history and current developments of the Biosphere 2 Project, a prototype for enclosed self-sustaining structures for space colonization built in the Arizona Desert. Biosphere 2 was created to educate and provide solutions to environmental problems and revenue from research. (MCO)

Agricultural and Environmental Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

K. Rasmuson; K. Rautenstrauch

2004-09-14

This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters.

Agricultural and Environmental Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

K. Rasmuson; K. Rautenstrauch

2004-01-01

This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters

Agricultural and Environmental Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

Kaylie Rasmuson; Kurt Rautenstrauch

2003-06-20

This analysis is one of nine technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. It documents input parameters for the biosphere model, and supports the use of the model to develop Biosphere Dose Conversion Factors (BDCF). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in the biosphere Technical Work Plan (TWP, BSC 2003a). It should be noted that some documents identified in Figure 1-1 may be under development and therefore not available at the time this document is issued. The ''Biosphere Model Report'' (BSC 2003b) describes the ERMYN and its input parameters. This analysis report, ANL-MGR-MD-000006, ''Agricultural and Environmental Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. This report defines and justifies values for twelve parameters required in the biosphere model. These parameters are related to use of contaminated groundwater to grow crops. The parameter values recommended in this report are used in the soil, plant, and carbon-14 submodels of the ERMYN.

Synthesis of Mo5SiB2 based nanocomposites by mechanical alloying and subsequent heat treatment

International Nuclear Information System (INIS)

Abbasi, A.R.; Shamanian, M.

2011-01-01

Research highlights: → α-Mo-Mo 5 SiB 2 nanocomposite was produced after 20 h milling of Mo-Si-B powders. → Heat treatment of 5 h MAed powders led to the formation of boride phases. → Heat treatment of 10 h MAed powders led to the formation of Mo 5 SiB 2 phase. → By increasing heat treatment time, quantity of Mo 5 SiB 2 phase increased. → 5 h heat treatment of 20 h MAed powders led to the formation of Mo 5 SiB 2 -based composite. - Abstract: In this study, systematic investigations were conducted on the synthesis of Mo 5 SiB 2 -based alloy by mechanical alloying and subsequent heat treatment. In this regard, Mo-12.5 mol% Si-25 mol% B powder mixture was milled for different times. Then, the mechanically alloyed powders were heat treated at 1373 K for 1 h. The phase transitions and microstructural evolutions of powder particles during mechanical alloying and heat treatment were studied by X-ray diffractometry and scanning electron microscopy. The results showed that the phase evolutions during mechanical alloying and subsequent heat treatment are strongly dependent on milling time. After 10 h of milling, a Mo solid solution was formed, but, no intermetallic phases were detected at this stage. However, an α-Mo-Mo 5 SiB 2 nanocomposite was formed after 20 h of milling. After heat treatment of 5 h mechanically alloyed powders, small amounts of MoB and Mo 2 B were detected and α-Mo-MoB-Mo 2 B composite was produced. On the other hand, heat treatment of 10 h and 20 h mechanically alloyed powders led to the formation of an α-Mo-Mo 5 SiB 2 -MoSi 2 -Mo 3 Si composite. At this point, there is a critical milling time (10 h) for the formation of Mo 5 SiB 2 phase after heat treatment wherein below that time, boride phase and after that time, Mo 5 SiB 2 phase are formed. In the case of 20 h mechanically alloyed powders, by increasing heat treatment time, not only the quantity of α-Mo was reduced and the quantity of Mo 5 SiB 2 was increased, but also new boride

A Biosphere model for use in SITE-94

International Nuclear Information System (INIS)

Barrdahl, R.

1996-08-01

A simple biosphere model has been designed for use in the SKI Project SITE-94 related to a hypothetical repository for spent nuclear fuel on the island of Aespoe. The model provides results in terms of radiation dose per 1 Bq/year, unless otherwise indicated, and results will thus have to be scaled with actual flux of radionuclides per year entering the primary biosphere recipients. The model does not include radioactive decay as there is assumed no delay in the model system, except for where explicitly mentioned. Specifically, no radioactive transitions resulting in daughter nuclides are considered. Calculated yearly individual and population committed (50 years) radiation doses to man are expressed as mSv/h, under the assumption of a flux of one Bq/year into the primary biosphere recipient. Calculated radiation doses resulting from the present biosphere model are hypothetical, and should under no circumstances be considered as real. Neither should they be used as quantitative information for decision purposes. The biosphere model is of a rough and primitive character and its precision, relative to the real biosphere in the surroundings of Aespoe is envisaged to be several orders of magnitude. 8 refs

Natural releases from contaminated groundwater, Example Reference Biosphere 2B

Energy Technology Data Exchange (ETDEWEB)

Simon, I. [CIEMAT/PIRA, Avda Complutense 22, 28040 Madrid (Spain)]. E-mail: isc@csn.es; Naito, M. [Nuclear Waste Management Organization of Japan (NUMO), 4-1-23 Shiba, Minato-ku, Tokyo, 108-0014 (Japan); Thorne, M.C. [Mike Thorne and Associates Limited, Abbotsleigh, Kebroyd Mount, Ripponden, Halifax, West Yorkshire HX6 3JA (United Kingdom); Walke, R. [Enviros QuantiSci, Building D5, Culham Science Centre, Culham, Oxfordshire OX14 3DB (United Kingdom)

2005-07-01

Safety assessment is a tool which, by means of an iterative procedure, allows the evaluation of the performance of a disposal system and its potential impact on human health and the environment. Radionuclides from a deep geological disposal facility may not reach the surface environment until many tens of thousands of years after closure of the facility. The BIOMASS Programme on BIOsphere Modelling and ASSessment developed Examples of 'Reference Biospheres' to illustrate the use of the methodology and to demonstrate how biosphere models can be developed and justified as being fit for purpose. The practical examples are also intended to be useful in their own right. The Example Reference Biosphere 2B presented here involves the consideration of alternative types of geosphere-biosphere interfaces and calculation of doses to members of hypothetical exposure groups arising from a wide range of exposure pathways within agricultural and semi-natural environments, but without allowing for evolution of the corresponding biosphere system. The example presented can be used as a generic analysis in some situations although it was developed around a relatively specific conceptual model. It should be a useful practical example, but the above numerical results are not intended to be understood as prescribed biosphere 'conversion factors'.

Natural releases from contaminated groundwater, Example Reference Biosphere 2B

International Nuclear Information System (INIS)

Simon, I.; Naito, M.; Thorne, M.C.; Walke, R.

2005-01-01

Safety assessment is a tool which, by means of an iterative procedure, allows the evaluation of the performance of a disposal system and its potential impact on human health and the environment. Radionuclides from a deep geological disposal facility may not reach the surface environment until many tens of thousands of years after closure of the facility. The BIOMASS Programme on BIOsphere Modelling and ASSessment developed Examples of 'Reference Biospheres' to illustrate the use of the methodology and to demonstrate how biosphere models can be developed and justified as being fit for purpose. The practical examples are also intended to be useful in their own right. The Example Reference Biosphere 2B presented here involves the consideration of alternative types of geosphere-biosphere interfaces and calculation of doses to members of hypothetical exposure groups arising from a wide range of exposure pathways within agricultural and semi-natural environments, but without allowing for evolution of the corresponding biosphere system. The example presented can be used as a generic analysis in some situations although it was developed around a relatively specific conceptual model. It should be a useful practical example, but the above numerical results are not intended to be understood as prescribed biosphere 'conversion factors'

WEB-DHM: A distributed biosphere hydrological model developed by coupling a simple biosphere scheme with a hillslope hydrological model

Science.gov (United States)

The coupling of land surface models and hydrological models potentially improves the land surface representation, benefiting both the streamflow prediction capabilities as well as providing improved estimates of water and energy fluxes into the atmosphere. In this study, the simple biosphere model 2...

Biosphere models for safety assesment of radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Proehl, G; Olyslaegers, G; Zeevaert, T [SCK/CEN, Mol (Belgium); Kanyar, B [University of Veszprem (Hungary). Dept. of Radiochemistry; Pinedo, P; Simon, I [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT), Madrid (Spain); Bergstroem, U; Hallberg, B [Studsvik Ecosafe, Nykoeping (Sweden); Mobbs, S; Chen, Q; Kowe, R [NRPB, Chilton, Didcot (United Kingdom)

2004-07-01

The aim of the BioMoSA project has been to contribute in the confidence building of biosphere models, for application in performance assessments of radioactive waste disposal. The detailed objectives of this project are: development and test of practical biosphere models for application in long-term safety studies of radioactive waste disposal to different European locations, identification of features, events and processes that need to be modelled on a site-specific rather than on a generic base, comparison of the results and quantification of the variability of site-specific models developed according to the reference biosphere methodology, development of a generic biosphere tool for application in long term safety studies, comparison of results from site-specific models to those from generic one, Identification of possibilities and limitations for the application of the generic biosphere model. (orig.)

Biosphere models for safety assessment of radioactive waste disposal

International Nuclear Information System (INIS)

Proehl, G.; Olyslaegers, G.; Zeevaert, T.; Kanyar, B.; Bergstroem, U.; Hallberg, B.; Mobbs, S.; Chen, Q.; Kowe, R.

2004-01-01

The aim of the BioMoSA project has been to contribute in the confidence building of biosphere models, for application in performance assessments of radioactive waste disposal. The detailed objectives of this project are: development and test of practical biosphere models for application in long-term safety studies of radioactive waste disposal to different European locations, identification of features, events and processes that need to be modelled on a site-specific rather than on a generic base, comparison of the results and quantification of the variability of site-specific models developed according to the reference biosphere methodology, development of a generic biosphere tool for application in long term safety studies, comparison of results from site-specific models to those from generic one, Identification of possibilities and limitations for the application of the generic biosphere model. (orig.)

Chapter 2. Radionuclides in the biosphere

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with role of radionuclides in the biosphere. Chapter consists of next parts: (1) Natural radionuclides in biosphere; (2) Man-made radionuclides in the biosphere; (3) Ecologically important radionuclides; (4) Natural background; (5) Radiotoxicity and (6) Paths of transfer of radionuclides from the source to human

Characterizing biospheric carbon balance using CO2 observations from the OCO-2 satellite

Directory of Open Access Journals (Sweden)

S. M. Miller

2018-05-01

Full Text Available NASA's Orbiting Carbon Observatory 2 (OCO-2 satellite launched in summer of 2014. Its observations could allow scientists to constrain CO2 fluxes across regions or continents that were previously difficult to monitor. This study explores an initial step toward that goal; we evaluate the extent to which current OCO-2 observations can detect patterns in biospheric CO2 fluxes and constrain monthly CO2 budgets. Our goal is to guide top-down, inverse modeling studies and identify areas for future improvement. We find that uncertainties and biases in the individual OCO-2 observations are comparable to the atmospheric signal from biospheric fluxes, particularly during Northern Hemisphere winter when biospheric fluxes are small. A series of top-down experiments indicate how these errors affect our ability to constrain monthly biospheric CO2 budgets. We are able to constrain budgets for between two and four global regions using OCO-2 observations, depending on the month, and we can constrain CO2 budgets at the regional level (i.e., smaller than seven global biomes in only a handful of cases (16 % of all regions and months. The potential of the OCO-2 observations, however, is greater than these results might imply. A set of synthetic data experiments suggests that retrieval errors have a salient effect. Advances in retrieval algorithms and to a lesser extent atmospheric transport modeling will improve the results. In the interim, top-down studies that use current satellite observations are best-equipped to constrain the biospheric carbon balance across only continental or hemispheric regions.

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek; P. Rogers

2004-10-27

The purpose of this analysis report is to evaluate and document the inclusion or exclusion of biosphere features, events, and processes (FEPs) with respect to modeling used to support the total system performance assessment (TSPA) for the license application (LA). A screening decision, either ''Included'' or ''Excluded'', is given for each FEP along with the corresponding technical basis for the excluded FEPs and the descriptions of how the included FEPs were incorporated in the biosphere model. This information is required by the U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report concern characteristics of the reference biosphere, the receptor, and the environmental transport and receptor exposure pathways for the groundwater and volcanic ash exposure scenarios considered in biosphere modeling. This revision provides the summary of the implementation of included FEPs in TSPA-LA, (i.e., how the FEP is included); for excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). This report is one of the 10 documents constituting the biosphere model documentation suite. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling. The ''Biosphere Model Report'' describes in detail the biosphere conceptual model and mathematical model. The input parameter reports shown to the right of the ''Biosphere Model Report'' contain detailed descriptions of the model input parameters and their development. Outputs from these six reports are used in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis and Disruptive Event Biosphere Dose Conversion Factor Analysis

"Biospheric medicine" as viewed from the two-year first closure of Biosphere 2.

Science.gov (United States)

Walford, R L; Bechtel, R; MacCallum, T; Paglia, D E; Weber, L J

1996-07-01

Biosphere 2 is a 3.15-acre, 7-million ft. enclosed ecological space near Tucson, AZ. It contains five wilderness and two domestic biomes (rain forest, savanna, desert, ocean, marsh; agricultural station, living quarters), an original introduction of 3,800 species (approximately 20% extinctions have occurred), and a large basement "technosphere." Sealed inside Biosphere 2 in September 1991, four women and four men, including two of the authors, maintained themselves and the various systems for 2 yr, the longest-sustained "isolated confined environment" period on record. MMPI psychological profile scores for Biosphere 2 crewmembers correlated closely with those reported for astronauts and shuttle applicants. Major medical problems encountered during the 2 yr included adaptation to a low-calorie (1800-2200 kcal.d-1 per person) but otherwise nutritionally adequate diet, with substantial weight loss (18% for men, 10% for women), and a declining oxygen atmosphere (down to 14.2%). Life in a miniworld such as Biosphere 2 may differ substantially from life in a space station or temporary planetary base. These differences include multiple, shifting, sometimes opposing post-launch objectives; complete self-sustenance with recycling of virtually all materials within a highly complex biologic system; retooling of some areas of practical medicine; an attention to "culture" as a social dynamic and how that may influence crew and leadership selection in a societal rather than a quasi-military community. Assuming that long-term planetary colonies must be largely self-sustaining (due to costs of supply over great distances), they must of necessity approach the condition of biospheres. Subject to chaos dynamic (nonlinear dynamic) perturbations, the behavior of complex biospheres will be inherently non-predictable--as opposed to the linear dynamic situation of most space missions--and will require of the inhabitants, including the medical team, a wide range of coping abilities. Under

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

International Nuclear Information System (INIS)

J. J. Tappen

2003-01-01

The purpose of this revision of ''Evaluation of the Applicability of Biosphere-Related Features, Events, and Processes (FEPs)'' (BSC 2001) is to document the screening analysis of biosphere-related primary FEPs, as identified in ''The Development of Information Catalogued in REV00 of the YMP FEP Database'' (Freeze et al. 2001), in accordance with the requirements of the final U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR Part 63. This database is referred to as the Yucca Mountain Project (YMP) FEP Database throughout this document. Those biosphere-related primary FEPs that are screened as applicable will be used to develop the conceptual model portion of the biosphere model, which will in turn be used to develop the mathematical model portion of the biosphere model. As part of this revision, any reference to the screening guidance or criteria provided either by Dyer (1999) or by the proposed NRC regulations at 64 FR 8640 has been removed. The title of this revision has been changed to more accurately reflect the purpose of the analyses. In addition, this revision will address Item Numbers 19, 20, 21, 25, and 26 from Attachment 2 of ''U.S. Nuclear Regulatory Commission/U.S. Department of Energy Technical Exchange and Management Meeting on Total System Performance Assessment and Integration (August 6 through 10, 2001)'' (Reamer 2001). This Scientific Analysis Report (SAR) does not support the current revision to the YMP FEP Database (Freeze et al. 2001). Subsequent to the release of the YMP FEP Database (Freeze et al. 2001), a series of reviews was conducted on both the FEP processes used to support Total System Performance Assessment for Site Recommendation and to develop the YMP FEP Database. In response to observations and comments from these reviews, particularly the NRC/DOE TSPA Technical Exchange in August 2001 (Reamer 2001), several Key Technical Issue (KTI) Agreements were developed. ''The Enhanced Plan for Features, Events and Processes

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

J. J. Tappen

2003-02-16

The purpose of this revision of ''Evaluation of the Applicability of Biosphere-Related Features, Events, and Processes (FEPs)'' (BSC 2001) is to document the screening analysis of biosphere-related primary FEPs, as identified in ''The Development of Information Catalogued in REV00 of the YMP FEP Database'' (Freeze et al. 2001), in accordance with the requirements of the final U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR Part 63. This database is referred to as the Yucca Mountain Project (YMP) FEP Database throughout this document. Those biosphere-related primary FEPs that are screened as applicable will be used to develop the conceptual model portion of the biosphere model, which will in turn be used to develop the mathematical model portion of the biosphere model. As part of this revision, any reference to the screening guidance or criteria provided either by Dyer (1999) or by the proposed NRC regulations at 64 FR 8640 has been removed. The title of this revision has been changed to more accurately reflect the purpose of the analyses. In addition, this revision will address Item Numbers 19, 20, 21, 25, and 26 from Attachment 2 of ''U.S. Nuclear Regulatory Commission/U.S. Department of Energy Technical Exchange and Management Meeting on Total System Performance Assessment and Integration (August 6 through 10, 2001)'' (Reamer 2001). This Scientific Analysis Report (SAR) does not support the current revision to the YMP FEP Database (Freeze et al. 2001). Subsequent to the release of the YMP FEP Database (Freeze et al. 2001), a series of reviews was conducted on both the FEP processes used to support Total System Performance Assessment for Site Recommendation and to develop the YMP FEP Database. In response to observations and comments from these reviews, particularly the NRC/DOE TSPA Technical Exchange in August 2001 (Reamer 2001), several Key Technical Issue (KTI) Agreements were developed

[Reliability and validity of the Severe Impairment Battery, short form (SIB-s), in patients with dementia in Spain].

Science.gov (United States)

Cruz-Orduña, Isabel; Agüera-Ortiz, Luis F; Montorio-Cerrato, Ignacio; León-Salas, Beatriz; Valle de Juan, M Cristina; Martínez-Martín, Pablo

2015-01-01

People with progressive dementia evolve into a state where traditional neuropsychological tests are not effective. Severe Impairment Battery (SIB) and short form (SIB-s) were developed for evaluating the cognitive status in patients with severe dementia. To evaluate the psychometric attributes of the SIB-s in patients with severe dementia. 127 institutionalized patients (female: 86.6%; mean age: 82.6 ± 7.5 years-old) with dementia were assessed with the SIB-s, the Global Deterioration Scale (GDS), Mini-Mental State Examination (MMSE), Severe Mini-Mental State Examination (sMMSE), Barthel Index and FAST. SIB-s acceptability, reliability, validity and precision were analyzed. The mean total score for scale was 19.1 ± 15.34 (range: 0-48). Floor effect was 18.1%, only marginally higher than the desirable 15%. Factor analysis identified a single factor explaining 68% of the total variance of the scale. Cronbach's alpha coefficient was 0.96 and the item-total corrected correlation ranged from 0.27 to 0.83. The item homogeneity value was 0.43. Test-retest and inter-rater reliability for the total score was satisfactory (ICC: 0.96 and 0.95, respectively). The SIB-s showed moderate correlation with functional dependency scales (Barthel Index: 0.48, FAST: -0.74). Standard error of measurement was 3.07 for the total score. The SIB-s is a reliable and valid instrument for evaluating patients with severe dementia in the Spanish population of relatively brief instruments.

A comparison between the example reference biosphere model ERB 2B and a process-based model: simulation of a natural release scenario.

Science.gov (United States)

Almahayni, T

2014-12-01

The BIOMASS methodology was developed with the objective of constructing defensible assessment biospheres for assessing potential radiological impacts of radioactive waste repositories. To this end, a set of Example Reference Biospheres were developed to demonstrate the use of the methodology and to provide an international point of reference. In this paper, the performance of the Example Reference Biosphere model ERB 2B associated with the natural release scenario, discharge of contaminated groundwater to the surface environment, was evaluated by comparing its long-term projections of radionuclide dynamics and distribution in a soil-plant system to those of a process-based, transient advection-dispersion model (AD). The models were parametrised with data characteristic of a typical rainfed winter wheat crop grown on a sandy loam soil under temperate climate conditions. Three safety-relevant radionuclides, (99)Tc, (129)I and (237)Np with different degree of sorption were selected for the study. Although the models were driven by the same hydraulic (soil moisture content and water fluxes) and radiological (Kds) input data, their projections were remarkably different. On one hand, both models were able to capture short and long-term variation in activity concentration in the subsoil compartment. On the other hand, the Reference Biosphere model did not project any radionuclide accumulation in the topsoil and crop compartments. This behaviour would underestimate the radiological exposure under natural release scenarios. The results highlight the potential role deep roots play in soil-to-plant transfer under a natural release scenario where radionuclides are released into the subsoil. When considering the relative activity and root depth profiles within the soil column, much of the radioactivity was taken up into the crop from the subsoil compartment. Further improvements were suggested to address the limitations of the Reference Biosphere model presented in this paper

Radioecological modelling of the biosphere as illustrated by the example of the model area Oberbauenstock

International Nuclear Information System (INIS)

Boehringer, J.; Fritschi, M.; Schwanner, I.; Resele, G.

1986-06-01

The biosphere model is the final link in the chain of radionuclide transport models used for radiation dose calculations for nuclear waste repositories. The dispersion of radionuclides from a low and intermediate level waste repository in the biosphere and their uptake by man through food pathways is investigated with a compartment model. The relevant biosphere parameters were based on the model site at Oberbauenstock and compiled as a model data set for further use in the biosphere modelling. Nuclide concentrations in the biosphere compartments and foodstuffs as well as annual individual radiation doses are calculated with the computer program BIOSPH. The present report contains a description of the model area and its subdivision into 4 compartments, a compilation of the relevant parameters and the simplifying assumptions that have been made, discussion of mathematical modelling of nuclide transport in the biosphere and of the calculation of the individual radiation doses, a technical description of the computer program BIOSPH and a detailed presentation of the results from the model calculations. (author)

Biosphere modelling for the assessment of radioactive waste repositories; the development of a common basis by the BIOMOVS II reference biospheres working group

International Nuclear Information System (INIS)

Dorp, F. van; Egan, M.; Kessler, J.H.; Nilsson, S.; Pinedo, P.; Smith, G.; Torres, C.

1998-01-01

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: (a) potential release occurs in the distant future, (b) reliable predictions of human behaviour at the time of release are impracticable, and (c) the biosphere is not considered to be a barrier as the geosphere and the engineered barriers. For these and other reasons, differences have arisen in the approaches to biosphere modelling for repository dose and risk assessment. The BIOMOVS II Reference Biospheres Working Group has developed (a) a recommended methodology for biosphere model development, (b) a structured list of features, events and processes (FEPs) which the model should describe, and (c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have laid the basis for considerable harmonisation in approaches to biosphere modelling of long term radionuclide releases. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

The water cycle in closed ecological systems: Perspectives from the Biosphere 2 and Laboratory Biosphere systems

Science.gov (United States)

Nelson, Mark; Dempster, W. F.; Allen, J. P.

2009-12-01

To achieve sustainable, healthy closed ecological systems requires solutions to challenges of closing the water cycle - recycling wastewater/irrigation water/soil medium leachate and evaporated water and supplying water of required quality as needed for different needs within the facility. Engineering Biosphere 2, the first multi-biome closed ecological system within a total airtight footprint of 12,700 m 2 with a combined volume of 200,000 m 3 with a total water capacity of some 6 × 10 6 L of water was especially challenging because it included human inhabitants, their agricultural and technical systems, as well as five analogue ecosystems ranging from rainforest to desert, freshwater ecologies to saltwater systems like mangrove and mini-ocean coral reef ecosystems. By contrast, the Laboratory Biosphere - a small (40 m 3 volume) soil-based plant growth facility with a footprint of 15 m 2 - is a very simplified system, but with similar challenges re salinity management and provision of water quality suitable for plant growth. In Biosphere 2, water needs included supplying potable water for people and domestic animals, irrigation water for a wide variety of food crops, and recycling and recovering soil nutrients from wastewater. In the wilderness biomes, providing adequately low salinity freshwater terrestrial ecosystems and maintaining appropriate salinity and pH in aquatic/marine ecosystems were challenges. The largest reservoirs in Biosphere 2 were the ocean/marsh with some 4 × 10 6 L, soil with 1 to 2 × 10 6 l, primary storage tank with 0 to 8 × 10 5 L and storage tanks for condensate and soil leachate collection and mixing tanks with a capacity of 1.6 × 10 5 L to supply irrigation for farm and wilderness ecosystems. Other reservoirs were far smaller - humidity in the atmosphere (2 × 10 3 L), streams in the rainforest and savannah, and seasonal pools in the desert were orders of magnitude smaller (8 × 10 4 L). Key technologies included condensation from

Biosphere modeling in waste disposal safety assessments -- An example using the terrestrial-aquatic model of the environment

International Nuclear Information System (INIS)

Klos, R.A.

1998-01-01

Geological disposal of radioactive wastes is intended to provide long-term isolation of potentially harmful radionuclides from the human environment and the biosphere. The long timescales involved pose unique problems for biosphere modeling because there are considerable uncertainties regarding the state of the biosphere into which releases might ultimately occur. The key to representing the biosphere in long-timescale assessments is the flexibility with which those aspects of the biosphere that are of relevance to dose calculations are represented, and this comes from the way in which key biosphere features, events, and processes are represented in model codes. How this is done in contemporary assessments is illustrated by the Terrestrial-Aquatic Model of the Environment (TAME), an advanced biosphere model for waste disposal assessments recently developed in Switzerland. A numerical example of the release of radionuclides from a subterranean source to an inland valley biosphere is used to illustrate how biosphere modeling is carried out and the practical ways in which meaningful quantitative results can be achieved. The results emphasize the potential for accumulation of radionuclides in the biosphere over long timescales and also illustrate the role of parameter values in such modeling

Exploring global carbon turnover and radiocarbon cycling in terrestrial biosphere models

Science.gov (United States)

Graven, H. D.; Warren, H.

2017-12-01

The uptake of carbon into terrestrial ecosystems through net primary productivity (NPP) and the turnover of that carbon through various pathways are the fundamental drivers of changing carbon stocks on land, in addition to human-induced and natural disturbances. Terrestrial biosphere models use different formulations for carbon uptake and release, resulting in a range of values in NPP of 40-70 PgC/yr and biomass turnover times of about 25-40 years for the preindustrial period in current-generation models from CMIP5. Biases in carbon uptake and turnover impact simulated carbon uptake and storage in the historical period and later in the century under changing climate and CO2 concentration, however evaluating global-scale NPP and carbon turnover is challenging. Scaling up of plot-scale measurements involves uncertainty due to the large heterogeneity across ecosystems and biomass types, some of which are not well-observed. We are developing the modelling of radiocarbon in terrestrial biosphere models, with a particular focus on decadal 14C dynamics after the nuclear weapons testing in the 1950s-60s, including the impact of carbon flux trends and variability on 14C cycling. We use an estimate of the total inventory of excess 14C in the biosphere constructed by Naegler and Levin (2009) using a 14C budget approach incorporating estimates of total 14C produced by the weapons tests and atmospheric and oceanic 14C observations. By simulating radiocarbon in simple biosphere box models using carbon fluxes from the CMIP5 models, we find that carbon turnover is too rapid in many of the simple models - the models appear to take up too much 14C and release it too quickly. Therefore many CMIP5 models may also simulate carbon turnover that is too rapid. A caveat is that the simple box models we use may not adequately represent carbon dynamics in the full-scale models. Explicit simulation of radiocarbon in terrestrial biosphere models would allow more robust evaluation of biosphere

Biosphere modelling for the assessment of radioactive waste repositories: the development of a common basis by the BIOMOVS II working group on reference biospheres

International Nuclear Information System (INIS)

VanDorp, F.

1996-01-01

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: a) potential release occurs in the distant future, b) reliable predictions of human behaviour at the time of release are impracticable, and c) the biosphere is not considered to be a barrier. For these and other reasons, many unexplained differences have arisen in the approaches to biosphere modelling. The BIOMOVS II Working Group on Reference Biospheres has developed a) a recommended methodology for biosphere model development, b) a structured electronic list of features, events and processes (FEPs), and c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have achieved considerable harmonisation in approaches to biosphere modelling. (author)

A Biosphere Assessment: Influence due to Geosphere-Biosphere Interfaces

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo

2009-01-01

models it is necessary to treat properly all the relevant FEPs and scenarios associated with the organically coupled chain between the modeling schemes of groundwater flow and nuclide transport in the geosphere and biosphere. Since the first development of a biosphere assessment model and the implemented codes, ACBIO and ACBIO2, which has more complex modeling scheme than its predecessor, based on BIOMASS methodology by utilizing AMBER for the purpose of evaluating dose rate to individual due to the long-term release of nuclides from the HLW or LILW repositories, a couple of their successors have been further developed and finally migrated to GoldSim scheme which is more flexible to adopt complex nuclide behaviors between the geosphere and the biosphere than AMBER based ACBIOs and then currently is being implemented into a GoldSim total system performance assessment programs which is being developed for the total safety assessment of the radioactive waste repository. To show its practicability and usability as well as to see the importance of GBIs, a quantified influence of the biosphere assessment has been investigated for varying GBI schemes through this study. To this end, among a few other possibilities, two cases having a different GBI scheme, the first one of which is 'Aquifer-only' GBI and the other one is 'Allpossible GBIs', they have been evaluated and compared with each other. Two plots for the calculated results are represented where peak dose conversion factors only for farming exposure group due to 38 nuclides are shown. Which represents the case of 'Aquifer- GBI' only, some discrepancy is found for such selected nuclides as 79 Se and 135 Cs between the cases of 'existence of a well' through which groundwater in the aquifer is drawn for the farming usage. However, unlike the farming exposure group no other two exposure groups, freshwater exposure and marine water exposure groups, seem to be free from the same scheme. However, all the exposure groups are

Biosphere 2 test module experimentation program

Science.gov (United States)

Alling, Abigail; Leigh, Linda S.; Maccallum, Taber; Alvarez-Romo, Norberto

1990-01-01

The Biosphere 2 Test Module is a facility which has the capability to do either short or long term closures: five month closures with plants were conducted. Also conducted were investigations of specific problems, such as trace gas purification by bioregenerative systems by in-putting a fixed concentration of a gas and observing its uptake over time. In other Test Module experiments, the concentration of one gas was changed to observe what effects this has on other gases present or on the system. The science of biospherics which encompasses the study of closed biological systems provides an opening into the future in space as well as in the Earth's biosphere.

An overview of biosphere modelling for the assessment of solid waste disposal

International Nuclear Information System (INIS)

Smith, G.M.

1990-01-01

The purpose of this paper is to discuss the role of biosphere modelling in relation to the overall assessment of disposal of solid radioactive waste. Model structure and data requirements are strongly influenced by a number of basic factors. Firstly, the alternative forms of safety criteria and regulatory requirements imply different end-points for biosphere models. Secondly, alternative disposal concepts can influence the significance of the biosphere as a barrier or diluting/concentrating feature affecting exposure of man. Thirdly, the range of different possibilities for release to the biosphere, including releases following intrusion, is very extensive. The requirements and state of development of biosphere models are discussed in relation to these factors along with methods being adopted to provide some expression of confidence in model results. 37 refs

Improvement of biosphere assessment methodology for performance assessment of geological disposal facility. 2

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

2002-02-01

This report contains results on study of Geosphere-Biosphere Interface (GBI), development of biosphere assessment model for gaseous and volatile radionuclides, review of biosphere assessment and research on safety indicators. Regarding study of Geosphere-Biosphere Interface (GBI), FEP database for the Geosphere-Biosphere Transitions Zone (GBTZ) were compiled. Furthermore, release scenarios were identified from the FEP database, and review of conservativeness and robustness of the conceptual and mathematical models developed previously by JNC were undertaken. Regarding development of biosphere assessment model for gaseous and volatile radionuclides, the conceptual and mathematical models were developed, and it was confirmed that the impact of the exposure pathway regarding gas release to flux-to-dose conversion factor is small. Regarding review of biosphere assessment data, the parameters which were used on JNC second progress report were reviewed and classified using the biosphere data protocol categories. Furthermore, the data for key parameter (important but poorly characterized parameters) were revised. Regarding research on safety indicator, some kinds of safety indicators, especially for the non-radioactive contaminant and for the non-human biota, are reviewed. (author)

Analysis specifications for the CC3 biosphere model biotrac

Energy Technology Data Exchange (ETDEWEB)

Szekely, J G; Wojciechowski, L C; Stephens, M E; Halliday, H A

1994-12-01

The CC3 (Canadian Concept, generation 3) model BIOTRAC (Biosphere Transport and Consequences) describes the movement in the biosphere of releases from an underground disposal vault, and the consequent radiological dose to a reference individual. Concentrations of toxic substances in different parts of the biosphere are also calculated. BIOTRAC was created specifically for the postclosure analyses of the Environmental Impact Statement that AECL is preparing on the concept for disposal of Canada`s nuclear fuel waste. The model relies on certain assumptions and constraints on the system, which are described by Davis et al. Accordingly, great care must be exercised if BIOTRAC is used for any other purpose.

SITE-94, Biosphere Model for SKI Project on the island of Aspro

International Nuclear Information System (INIS)

Barrdahl, Runo Alfons Gunnar

2003-01-01

1 - Description of program or function: A simple biosphere model has been designed for use in the SKI project related to a hypothetical repository for spent nuclear fuel on the island of Aspro near Oskarshamn in Southern Sweden. Project SITE-94 studies the safety aspects of this hypothetical repository. Any weakness in repository performance will reveal itself as a leakage of radionuclides out of the repository, and finally into the biosphere where man and nature are at risk of being exposed. Thus, as the final link in estimating such leakage, a biosphere model will provide an estimate of resulting radiation impact on man and nature. 2 - Methods: The present biosphere model involves a stationary scenario (Reference Scenario) and a climate evolution and geological scenario (Central Scenario). The stationary and time evolution scenarios contain as primary recipients a well and the bay of Borholm, i.e., the waters surrounding the island of Aspo. The time evolution scenario additionally incorporates as primary recipients a waste sample from intrusion and, in a remote future time, the Baltic Sea. Transport of radionuclides within the model system is assumed to be essentially immediate, except for in sediment subject to land rise. Except for this pathway, radioactive decay is therefore not included at all in the model. Land rise sediment is modeled to be subject to radioactive decay from the time the sediment no longer constitutes sea bottom until the desired time point of the model. Correction for radioactive decay is thus generally supposed to be made outside the biosphere model. Unless otherwise indicated, yearly individual and population committed (50 years) radiation doses to man are considered, and all scenarios involve a constant flux of 1 Bq/y of each radionuclide considered into the respective primary recipient. Nominal values of radionuclide flux will finally be multiplied with the radiation dose per one Bq per year resulting from the model in order to obtain

Disruptive Event Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-07-21

the biosphere. The biosphere process model for this scenario uses the surface deposition of contaminated ash as the source of radionuclides in the biosphere. The initial atmospheric transport and dispersion of the ash as well as its subsequent redistribution by fluvial and aeolian processes are not addressed within the biosphere model. The analysis was performed in accordance with the TWP (BSC 2003 [DIRS 163602]). The biosphere model considers features, events, and processes (FEPs) applicable to the Yucca Mountain biosphere (DTN: MO0303SEPFEPS2.000 [DIRS 162452]). The disposition of these FEPs in the TSPA is through the BDCFs which are the direct input to the TSPA model. The disposition of the included FEPs within the biosphere model is documented in the ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]). Specifically, the consideration of the included FEPs in the conceptual model is shown in Table 6.2-1, relationships among the biosphere-related FEPs, the biosphere conceptual model, and the exposure scenarios are more fully examined in Section 6.3, and the disposition of the included FEPs within the mathematical model, and their relationship to the model equations and input parameters is presented in Table 6.7-1 of the ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]). In addition to producing the BDCFs for the volcanic ash exposure scenario, this analysis develops the values of dose factors for calculation of inhalation exposure during a volcanic eruption. The FEPs that were considered in the development of dose factors are listed in Table 1-1. The disposition of these FEPs in TSPA is through the dose factors that are the input to the TSPA model.

Disruptive Event Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M. A. Wasiolek

2003-01-01

model for this scenario uses the surface deposition of contaminated ash as the source of radionuclides in the biosphere. The initial atmospheric transport and dispersion of the ash as well as its subsequent redistribution by fluvial and aeolian processes are not addressed within the biosphere model. The analysis was performed in accordance with the TWP (BSC 2003 [DIRS 163602]). The biosphere model considers features, events, and processes (FEPs) applicable to the Yucca Mountain biosphere (DTN: MO0303SEPFEPS2.000 [DIRS 162452]). The disposition of these FEPs in the TSPA is through the BDCFs which are the direct input to the TSPA model. The disposition of the included FEPs within the biosphere model is documented in the ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]). Specifically, the consideration of the included FEPs in the conceptual model is shown in Table 6.2-1, relationships among the biosphere-related FEPs, the biosphere conceptual model, and the exposure scenarios are more fully examined in Section 6.3, and the disposition of the included FEPs within the mathematical model, and their relationship to the model equations and input parameters is presented in Table 6.7-1 of the ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]). In addition to producing the BDCFs for the volcanic ash exposure scenario, this analysis develops the values of dose factors for calculation of inhalation exposure during a volcanic eruption. The FEPs that were considered in the development of dose factors are listed in Table 1-1. The disposition of these FEPs in TSPA is through the dose factors that are the input to the TSPA model

A GoldSim Based Biosphere Assessment Model for a HLW Repository

International Nuclear Information System (INIS)

Lee, Youn-Myoung; Hwang, Yong-Soo; Kang, Chul-Hyung

2007-01-01

To demonstrate the performance of a repository, the dose exposure to a human being due to nuclide releases from a repository should be evaluated and the results compared to the dose limit presented by the regulatory bodies. To evaluate a dose rate to an individual due to a long-term release of nuclides from a HLW repository, biosphere assessment models and their implemented codes such as ACBIO1 and ACBIO2 have been developed with the aid of AMBER during the last few years. BIOMASS methodology has been adopted for a HLW repository currently being considered in Korea, which has a similar concept to the Swedish KBS-3 HLW repository. Recently, not just only for verifying the purpose for biosphere assessment models but also for varying the possible alternatives to assess the consequences in a biosphere due to a HLW repository, another version of the assessment modesl has been newly developed in the frame of development programs for a total system performance assessment modeling tool by utilizing GoldSim. Through a current study, GoldSim approach for a biosphere modeling is introduced. Unlike AMBER by which a compartment scheme can be rather simply constructed with an appropriate transition rate between compartments, GoldSim was designed to facilitate the object-oriented modules by which specific models can be addressed in an additional manner, like solving jig saw puzzles

A biosphere model for use in the SKI Project SITE-94

International Nuclear Information System (INIS)

Barrdahl, R.A.G.

1995-04-01

A simple biosphere model has been designed for use in the SKI Project SITE-94 related to a hypothetical repository for spent nuclear fuel on the island of Aespoe near Oskarshamn in southern Sweden. The model provides results in terms of radiation dose per Bq/y, unless otherwise indicated, and results will thus have to be scaled with actual flux of radionuclides per year entering the primary biosphere recipients. The model does not include radioactive decay as there is assumed no delay in the model system, except for where explicitly mentioned. Specifically, no radioactive transitions resulting in daughter nuclides are considered. Calculated yearly individual and population committed (50 years) radiation doses to man are expressed in terms of Sv/y and radiation dose rates to fish are expressed as mSv/h. Calculated radiation doses resulting from the present biosphere model are hypothetical, and should under no circumstances be considered as real. Neither should they be used as quantitative information for decision purposes. The biosphere model is of a rough and primitive character and its precision, relative to the real biosphere in the surroundings of Aespoe is envisaged to be several orders of magnitude

Simulation of carbon isotope discrimination of the terrestrial biosphere

Science.gov (United States)

Suits, N. S.; Denning, A. S.; Berry, J. A.; Still, C. J.; Kaduk, J.; Miller, J. B.; Baker, I. T.

2005-03-01

We introduce a multistage model of carbon isotope discrimination during C3 photosynthesis and global maps of C3/C4 plant ratios to an ecophysiological model of the terrestrial biosphere (SiB2) in order to predict the carbon isotope ratios of terrestrial plant carbon globally at a 1° resolution. The model is driven by observed meteorology from the European Centre for Medium-Range Weather Forecasts (ECMWF), constrained by satellite-derived Normalized Difference Vegetation Index (NDVI) and run for the years 1983-1993. Modeled mean annual C3 discrimination during this period is 19.2‰; total mean annual discrimination by the terrestrial biosphere (C3 and C4 plants) is 15.9‰. We test simulation results in three ways. First, we compare the modeled response of C3 discrimination to changes in physiological stress, including daily variations in vapor pressure deficit (vpd) and monthly variations in precipitation, to observed changes in discrimination inferred from Keeling plot intercepts. Second, we compare mean δ13C ratios from selected biomes (Broadleaf, Temperate Broadleaf, Temperate Conifer, and Boreal) to the observed values from Keeling plots at these biomes. Third, we compare simulated zonal δ13C ratios in the Northern Hemisphere (20°N to 60°N) to values predicted from high-frequency variations in measured atmospheric CO2 and δ13C from terrestrially dominated sites within the NOAA-Globalview flask network. The modeled response to changes in vapor pressure deficit compares favorably to observations. Simulated discrimination in tropical forests of the Amazon basin is less sensitive to changes in monthly precipitation than is suggested by some observations. Mean model δ13C ratios for Broadleaf, Temperate Broadleaf, Temperate Conifer, and Boreal biomes compare well with the few measurements available; however, there is more variability in observations than in the simulation, and modeled δ13C values for tropical forests are heavy relative to observations

Models for dose assessments. Modules for various biosphere types

Energy Technology Data Exchange (ETDEWEB)

Bergstroem, U.; Nordlinder, S.; Aggeryd, I. [Studsvik Eco and Safety AB, Nykoeping (Sweden)

1999-12-01

The main objective of this study was to provide a basis for illustrations of yearly dose rates to the most exposed individual from hypothetical leakages of radionuclides from a deep bedrock repository for spent nuclear fuel and other radioactive waste. The results of this study will be used in the safety assessment SR 97 and in a study on the design and long-term safety for a repository planned to contain long-lived low and intermediate level waste. The repositories will be designed to isolate the radionuclides for several hundred thousands of years. In the SR 97 study, however, hypothetical scenarios for leakage are postulated. Radionuclides are hence assumed to be transported in the geosphere by groundwater, and probably discharge into the biosphere. This may occur in several types of ecosystems. A number of categories of such ecosystems were identified, and turnover of radionuclides was modelled separately for each ecosystem. Previous studies had focused on generic models for wells, lakes and coastal areas. These models were, in this study, developed further to use site-specific data. In addition, flows of groundwater, containing radionuclides, to agricultural land and peat bogs were considered. All these categories are referred to as modules in this report. The forest ecosystems were not included, due to a general lack of knowledge of biospheric processes in connection with discharge of groundwater in forested areas. Examples of each type of module were run with the assumption of a continuous annual release into the biosphere of 1 Bq for each radionuclide during 10 000 years. The results are presented as ecosystem specific dose conversion factors (EDFs) for each nuclide at the year 10 000, assuming stationary ecosystems and prevailing living conditions and habits. All calculations were performed with uncertainty analyses included. Simplifications and assumptions in the modelling of biospheric processes are discussed. The use of modules may be seen as a step

Models for dose assessments. Modules for various biosphere types

International Nuclear Information System (INIS)

Bergstroem, U.; Nordlinder, S.; Aggeryd, I.

1999-12-01

The main objective of this study was to provide a basis for illustrations of yearly dose rates to the most exposed individual from hypothetical leakages of radionuclides from a deep bedrock repository for spent nuclear fuel and other radioactive waste. The results of this study will be used in the safety assessment SR 97 and in a study on the design and long-term safety for a repository planned to contain long-lived low and intermediate level waste. The repositories will be designed to isolate the radionuclides for several hundred thousands of years. In the SR 97 study, however, hypothetical scenarios for leakage are postulated. Radionuclides are hence assumed to be transported in the geosphere by groundwater, and probably discharge into the biosphere. This may occur in several types of ecosystems. A number of categories of such ecosystems were identified, and turnover of radionuclides was modelled separately for each ecosystem. Previous studies had focused on generic models for wells, lakes and coastal areas. These models were, in this study, developed further to use site-specific data. In addition, flows of groundwater, containing radionuclides, to agricultural land and peat bogs were considered. All these categories are referred to as modules in this report. The forest ecosystems were not included, due to a general lack of knowledge of biospheric processes in connection with discharge of groundwater in forested areas. Examples of each type of module were run with the assumption of a continuous annual release into the biosphere of 1 Bq for each radionuclide during 10 000 years. The results are presented as ecosystem specific dose conversion factors (EDFs) for each nuclide at the year 10 000, assuming stationary ecosystems and prevailing living conditions and habits. All calculations were performed with uncertainty analyses included. Simplifications and assumptions in the modelling of biospheric processes are discussed. The use of modules may be seen as a step

Application of a generic biosphere model for dose assessments to five European sites

International Nuclear Information System (INIS)

Chen, Q; Kowe, R; Mobbs, S F; Proehl, G; Olyslaegers, G; Zeevaert, T; Kanyar, B; Pinedo, P; Simon, I; Bergstroem, U; Hallberg, B; Jones, J A; Oatway, W B; Watson, S J

2006-01-01

The BIOMOSA (BIOsphere MOdels for Safety Assessment of radioactive waste disposal) project was part of the EC fifth framework research programme. The main goal of this project was to improve the scientific basis for the application of biosphere models in the framework of long-term safety studies of radioactive waste disposal facilities and to enhance the confidence in using biosphere models for performance assessments. The study focused on the development and application of a generic biosphere tool BIOGEM (BIOsphere GEneric Model) using the IAEA BIOMASS reference biosphere methodology, and the comparison between BIOGEM and five site-specific biosphere models. The site-specific models and the generic model were applied to five typical locations in Europe, resulting in estimates of the annual effective individual doses to the critical groups and the ranking of the importance of the exposure pathways for each of the sites. Uncertainty in the results was also estimated by means of stochastic calculations based on variation of the site-specific parameter values. This paper describes the generic model and the deterministic and stochastic results obtained when it was applied to the five sites. Details of the site-specific models and the corresponding results are described in two companion papers. This paper also presents a comparison of the results between the generic model and site-specific models. In general, there was an acceptable agreement of the BIOGEM for both the deterministic and stochastic results with the results from the site-specific models

Biosphere transport of radionuclides. First modelling by using a selected example

International Nuclear Information System (INIS)

Bundi, A.

1984-12-01

The dispersion of radionuclides in the biosphere and their uptake by man via various nutritional pathways is studied using a compartment model. The sample environment is the area of the lower Limmat and Aare valleys. General considerations of the compartmental description of the biosphere are made. The problem of the description of surface features, in particular soil, sediment and water, is studied in detail using the code BIOPATH. This study is intended to be an example of how a model of the biosphere could be constructed. It is shown that this is a reasonable model to calculate the spreading of radionuclides in the biosphere and that it indicates the relative significance of individual compartments, pathways and radionuclides. Calculated values of doses to man, however, should not be used as reference data for safety analyses. (author)

Post-closure biosphere assessment modelling: comparison of complex and more stylised approaches.

Science.gov (United States)

Walke, Russell C; Kirchner, Gerald; Xu, Shulan; Dverstorp, Björn

2015-10-01

Geological disposal facilities are the preferred option for high-level radioactive waste, due to their potential to provide isolation from the surface environment (biosphere) on very long timescales. Assessments need to strike a balance between stylised models and more complex approaches that draw more extensively on site-specific information. This paper explores the relative merits of complex versus more stylised biosphere models in the context of a site-specific assessment. The more complex biosphere modelling approach was developed by the Swedish Nuclear Fuel and Waste Management Co (SKB) for the Formark candidate site for a spent nuclear fuel repository in Sweden. SKB's approach is built on a landscape development model, whereby radionuclide releases to distinct hydrological basins/sub-catchments (termed 'objects') are represented as they evolve through land rise and climate change. Each of seventeen of these objects is represented with more than 80 site specific parameters, with about 22 that are time-dependent and result in over 5000 input values per object. The more stylised biosphere models developed for this study represent releases to individual ecosystems without environmental change and include the most plausible transport processes. In the context of regulatory review of the landscape modelling approach adopted in the SR-Site assessment in Sweden, the more stylised representation has helped to build understanding in the more complex modelling approaches by providing bounding results, checking the reasonableness of the more complex modelling, highlighting uncertainties introduced through conceptual assumptions and helping to quantify the conservatisms involved. The more stylised biosphere models are also shown capable of reproducing the results of more complex approaches. A major recommendation is that biosphere assessments need to justify the degree of complexity in modelling approaches as well as simplifying and conservative assumptions. In light of

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M. A.

2003-01-01

The purpose of this report is to document the evaluation of biosphere features, events, and processes (FEPs) that relate to the license application (LA) process as required by the U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The evaluation determines whether specific biosphere-related FEPs should be included or excluded from consideration in the Total System Performance Assessment (TSPA). This analysis documents the technical basis for screening decisions as required at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. For FEPs that are included in the TSPA, this analysis provides a TSPA disposition, which summarizes how the FEP has been included and addressed in the TSPA model, and cites the analysis reports and model reports that provide the technical basis and description of its disposition. For FEPs that are excluded from the TSPA, this analysis report provides a screening argument, which identifies the basis for the screening decision (i.e., low probability, low consequence, or by regulation) and discusses the technical basis that supports that decision. In cases, where a FEP covers multiple technical areas and is shared with other FEP analysis reports, this analysis may provide only a partial technical basis for the screening of the FEP. The full technical basis for these shared FEPs is addressed collectively by all FEP analysis reports that cover technical disciplines sharing a FEP. FEPs must be included in the TSPA unless they can be excluded by low probability, low consequence, or regulation. A FEP can be excluded from the TSPA by low probability per 10 CFR 63.114(d) [DIRS 156605], by showing that it has less than one chance in 10,000 of occurring over 10,000 years (or an approximately equivalent annualized probability of 10 -8 ). A FEP can be excluded from the TSPA by low consequence per 10 CFR 63.114 (e or f) [DIRS 156605], by showing that omitting the FEP would not significantly change the magnitude and

Improvement of biosphere assessment methodology for performance assessment of geological disposal facility. 2. Outline

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

2002-02-01

This report contains results on study of Geosphere-Biosphere Interface (GBI), development of biosphere assessment model for gaseous and volatile radionuclides, review of biosphere assessment and research on safety indicators. Regarding study of Geosphere-Biosphere Interface (GBI), FEP database for the Geosphere-Biosphere Transitions Zone (GBTZ) were compiled. Furthermore, release scenarios were identified from the FEP database, and review of conservativeness and robustness of the conceptual and mathematical models developed previously by JNC were undertaken. Regarding development of biosphere assessment model for gaseous and volatile radionuclides, the conceptual and mathematical models were developed, and it was confirmed that the impact of the exposure pathway regarding gas release to flux-to-dose conversion factor is small. Regarding review of biosphere assessment data, the parameters which were used on JNC second progress report were reviewed and classified using the biosphere data protocol categories. Furthermore, the data for key parameter (important but poorly characterized parameters) were revised. Regarding research on safety indicator, some kinds of safety indicators, especially for the non-radioactive contaminant and for the non-human biota, are reviewed. (author)

Analysis specifications for the CC3 biosphere model BIOTRAC

International Nuclear Information System (INIS)

Szekely, J.G.; Wojciechowski, L.C.; Stephens, M.E.; Halliday, H.A.

1994-12-01

AECL Research is assessing a concept for disposing of Canada's nuclear fuel waste in a vault deep in plutonic rock of the Canadian Shield. A computer program called the Systems Variability Analysis Code (SYVAC) has been developed as an analytical tool for the postclosure (long-term) assessment of the concept. SYVAC3, the third generation of the code, is an executive program that directs repeated simulation of the disposal system to take into account parameter variation. For the postclosure assessment, the system model, CC3 (Canadian Concept, generation 3), was developed to describe a hypothetical disposal system that includes a disposal vault, the local geosphere and the biosphere in the vicinity of any discharge zones. BIOTRAC (BIOsphere TRansport And Consequences) is the biosphere model in the CC3 system model. The specifications for BIOTRAC, which were developed over a period of seven years, were subjected to numerous walkthrough examinations by the Biosphere Model Working Group to ensure that the intent of the model developers would be correctly specified for transformation into FORTRAN code. The FORTRAN version of BIOTRAC was written from interim versions of these specifications. Improvements to the code are based on revised versions of these specifications. The specifications consist of a data dictionary; sets of synopses, data flow diagrams and mini specs for the component models of BIOTRAC (surface water, soil, atmosphere, and food chain and dose); and supporting calculations (interface to the geosphere, consequences, and mass balance). (author). 20 refs., tabs., figs

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-10-09

The purpose of this report is to document the evaluation of biosphere features, events, and processes (FEPs) that relate to the license application (LA) process as required by the U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The evaluation determines whether specific biosphere-related FEPs should be included or excluded from consideration in the Total System Performance Assessment (TSPA). This analysis documents the technical basis for screening decisions as required at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. For FEPs that are included in the TSPA, this analysis provides a TSPA disposition, which summarizes how the FEP has been included and addressed in the TSPA model, and cites the analysis reports and model reports that provide the technical basis and description of its disposition. For FEPs that are excluded from the TSPA, this analysis report provides a screening argument, which identifies the basis for the screening decision (i.e., low probability, low consequence, or by regulation) and discusses the technical basis that supports that decision. In cases, where a FEP covers multiple technical areas and is shared with other FEP analysis reports, this analysis may provide only a partial technical basis for the screening of the FEP. The full technical basis for these shared FEPs is addressed collectively by all FEP analysis reports that cover technical disciplines sharing a FEP. FEPs must be included in the TSPA unless they can be excluded by low probability, low consequence, or regulation. A FEP can be excluded from the TSPA by low probability per 10 CFR 63.114(d) [DIRS 156605], by showing that it has less than one chance in 10,000 of occurring over 10,000 years (or an approximately equivalent annualized probability of 10{sup -8}). A FEP can be excluded from the TSPA by low consequence per 10 CFR 63.114 (e or f) [DIRS 156605], by showing that omitting the FEP would not significantly change the magnitude and

The status of world biosphere modelling for waste disposal assessments following BIOMOVS II

International Nuclear Information System (INIS)

Klos, R.; Reid, J.A.K.; Santucci, P.; Bergstrom, U.

1996-01-01

Biosphere modelling for radioactive waste disposal assessments faces unique problems. Models for such applications tend to be quite distinct from other similar environmental assessment tools. Over the past few years, two of the Working Groups in the second international biosphere model validation study (BIOMOVS II) have been considering the special requirements for such models. The BIOMOVS II Reference Biospheres Working Group has concentrated on the elaboration of the methodology for the definition of models for such assessments. lie Complementary Studies Working Group has dealt with how the Features, Events and Processes (FEPS) included in the participating models are represented, in the context of the representation of a temperate inland biosphere. The aim of Complementary Studies was to move forward from the first phase of BIOMOVS, with the analysis going further and deeper into principles on which the participating models are based. Ten of the leading models from around the world have participated in the Complementary Studies model intercomparison exercise. This paper presents some key findings using the international biosphere FEP-list produced by the Reference Biospheres Working Group as a framework for discussing the current state-of-the-art. Common features of the models as well as reasons for the model differences are discussed. Areas where the international community could benefit from a harmonisation of approaches are also identified, setting out possible future requirements and developments. In the Complementary Studies intercomparison, the hypothetical release of radionuclides to an inland valley biosphere was considered. The radionuclides considered in the study were selected because of their relevance for underground repositories for long-lived radioactive wastes and because their individual properties made them suitable probes for many of the important Features, Events and Processes (FEPS) in long timescale biosphere modelling. The data

Multi-model analysis of terrestrial carbon cycles in Japan: reducing uncertainties in model outputs among different terrestrial biosphere models using flux observations

Science.gov (United States)

Ichii, K.; Suzuki, T.; Kato, T.; Ito, A.; Hajima, T.; Ueyama, M.; Sasai, T.; Hirata, R.; Saigusa, N.; Ohtani, Y.; Takagi, K.

2009-08-01

Terrestrial biosphere models show large uncertainties when simulating carbon and water cycles, and reducing these uncertainties is a priority for developing more accurate estimates of both terrestrial ecosystem statuses and future climate changes. To reduce uncertainties and improve the understanding of these carbon budgets, we investigated the ability of flux datasets to improve model simulations and reduce variabilities among multi-model outputs of terrestrial biosphere models in Japan. Using 9 terrestrial biosphere models (Support Vector Machine-based regressions, TOPS, CASA, VISIT, Biome-BGC, DAYCENT, SEIB, LPJ, and TRIFFID), we conducted two simulations: (1) point simulations at four flux sites in Japan and (2) spatial simulations for Japan with a default model (based on original settings) and an improved model (based on calibration using flux observations). Generally, models using default model settings showed large deviations in model outputs from observation with large model-by-model variability. However, after we calibrated the model parameters using flux observations (GPP, RE and NEP), most models successfully simulated seasonal variations in the carbon cycle, with less variability among models. We also found that interannual variations in the carbon cycle are mostly consistent among models and observations. Spatial analysis also showed a large reduction in the variability among model outputs, and model calibration using flux observations significantly improved the model outputs. These results show that to reduce uncertainties among terrestrial biosphere models, we need to conduct careful validation and calibration with available flux observations. Flux observation data significantly improved terrestrial biosphere models, not only on a point scale but also on spatial scales.

Data management at Biosphere 2 center

Science.gov (United States)

McCreary, Leone F.

1997-01-01

Throughout the history of Biosphere 2, the collecting and recording of biological data has been sporadic. Currently no active effort to administer and record regular biological surveys is being made. Also, there is no central location, such as an on-site data library, where all records from various studies have been archived. As a research institute, good, complete data records are at the core of all Biosphere 2's scientific endeavors. It is therefore imperative that an effective data management system be implemented within the management and research departments as soon as possible. Establishing this system would require three general phases: (1) Design/implement a new archiving/management program (including storage, cataloging and retrieval systems); (2) Organize and input baseline and intermediate data from existing archives; and (3) Maintain records by inputting new data.

Use of contaminated well water, example reference biospheres 1 and 2A

International Nuclear Information System (INIS)

Santucci, P.; Kontic, B.; Coughtrey, P.; McKenney, C.; Smith, G.

2005-01-01

The BIOMASS programme's Theme 1 evaluated a number of scenarios, which assisted in the development of practical guidance. A total of four Example Reference Biospheres were fully developed, with the assumptions, data, and models thoroughly documented. These Examples display both the practicality and the transparency available through the use of the Reference Biosphere Methodology. While the methodology is designed to promote transparency and traceability, proper documentation and justification is still the responsibility of the user. The Examples can also be used as generic analyses in some situations. Although it is anticipated that each of the Reference Biospheres explored within BIOMASS Theme 1 should be a useful practical example, the quantitative results of the model calculations are not intended to be understood as prescribed biosphere 'conversion factors'. In choosing to implement an Example, careful consideration would need to be given to their relevance (including associated data) to the particular assessment context at hand. In general, the more complex the model is, the more limited applicability it has for generic purposes. For example, ERB1A (direct use of well water for drinking) can be used straightforwardly, with minor or no adjustments, at a number of generic sites. Example 2A, however, for which climatic conditions and agricultural practices need to be specified, would need to be implemented for each specific situation

Group dynamics challenges: Insights from Biosphere 2 experiments

Science.gov (United States)

Nelson, Mark; Gray, Kathelin; Allen, John P.

2015-07-01

Successfully managing group dynamics of small, physically isolated groups is vital for long duration space exploration/habitation and for terrestrial CELSS (Controlled Environmental Life Support System) facilities with human participants. Biosphere 2 had important differences and shares some key commonalities with both Antarctic and space environments. There were a multitude of stress factors during the first two year closure experiment as well as mitigating factors. A helpful tool used at Biosphere 2 was the work of W.R. Bion who identified two competing modalities of behavior in small groups. Task-oriented groups are governed by conscious acceptance of goals, reality-thinking in relation to time and resources, and intelligent management of challenges. The opposing unconscious mode, the "basic-assumption" ("group animal") group, manifests through Dependency/Kill the Leader, Fight/Flight and Pairing. These unconscious dynamics undermine and can defeat the task group's goal. The biospherians experienced some dynamics seen in other isolated teams: factions developing reflecting personal chemistry and disagreements on overall mission procedures. These conflicts were exacerbated by external power struggles which enlisted support of those inside. Nevertheless, the crew evolved a coherent, creative life style to deal with some of the deprivations of isolation. The experience of the first two year closure of Biosphere 2 vividly illustrates both vicissitudes and management of group dynamics. The crew overrode inevitable frictions to creatively manage both operational and research demands and opportunities of the facility, thus staying 'on task' in Bion's group dynamics terminology. The understanding that Biosphere 2 was their life support system may also have helped the mission to succeed. Insights from the Biosphere 2 experience can help space and remote missions cope successfully with the inherent challenges of small, isolated crews.

Group dynamics challenges: Insights from Biosphere 2 experiments.

Science.gov (United States)

Nelson, Mark; Gray, Kathelin; Allen, John P

2015-07-01

Successfully managing group dynamics of small, physically isolated groups is vital for long duration space exploration/habitation and for terrestrial CELSS (Controlled Environmental Life Support System) facilities with human participants. Biosphere 2 had important differences and shares some key commonalities with both Antarctic and space environments. There were a multitude of stress factors during the first two year closure experiment as well as mitigating factors. A helpful tool used at Biosphere 2 was the work of W.R. Bion who identified two competing modalities of behavior in small groups. Task-oriented groups are governed by conscious acceptance of goals, reality-thinking in relation to time and resources, and intelligent management of challenges. The opposing unconscious mode, the "basic-assumption" ("group animal") group, manifests through Dependency/Kill the Leader, Fight/Flight and Pairing. These unconscious dynamics undermine and can defeat the task group's goal. The biospherians experienced some dynamics seen in other isolated teams: factions developing reflecting personal chemistry and disagreements on overall mission procedures. These conflicts were exacerbated by external power struggles which enlisted support of those inside. Nevertheless, the crew evolved a coherent, creative life style to deal with some of the deprivations of isolation. The experience of the first two year closure of Biosphere 2 vividly illustrates both vicissitudes and management of group dynamics. The crew overrode inevitable frictions to creatively manage both operational and research demands and opportunities of the facility, thus staying 'on task' in Bion's group dynamics terminology. The understanding that Biosphere 2 was their life support system may also have helped the mission to succeed. Insights from the Biosphere 2 experience can help space and remote missions cope successfully with the inherent challenges of small, isolated crews. Copyright © 2015 The Committee on

Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

International Nuclear Information System (INIS)

Klos, Richard; Wilmot, Roger

2002-09-01

The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference between

Biosphere model for assessing doses from nuclear waste disposal

International Nuclear Information System (INIS)

Zach, R.; Amiro, B.D.; Davis, P.A.; Sheppard, S.C.; Szekeley, J.G.

1994-01-01

The biosphere model, BIOTRAC, for predicting long term nuclide concentrations and radiological doses from Canada's nuclear fuel waste disposal concept of a vault deep in plutonic rock of the Canadian Shield is presented. This generic, boreal zone biosphere model is based on scenario analysis and systems variability analysis using Monte Carlo simulation techniques. Conservatism is used to bridge uncertainties, even though this creates a small amount of extra nuclide mass. Environmental change over the very long assessment period is mainly handled through distributed parameter values. The dose receptors are a critical group of humans and four generic non-human target organisms. BIOTRAC includes six integrated submodels and it interfaces smoothly with a geosphere model. This interface includes a bedrock well. The geosphere model defines the discharge zones of deep groundwater where nuclides released from the vault enter the biosphere occupied by the dose receptors. The size of one of these zones is reduced when water is withdrawn from the bedrock well. Sensitivity analysis indicates 129 I is by far the most important radionuclide. Results also show bedrock-well water leads to higher doses to man than lake water, but the former doses decrease with the size of the critical group. Under comparable circumstances, doses to the non-human biota are greater than those for man

Disruptive Event Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-08

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2004 [DIRS 169671]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis''. The objective of this

Disruptive Event Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2004 [DIRS 169671]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis''. The objective of this analysis was to develop the BDCFs for the volcanic ash

DISRUPTIVE EVENT BIOSPHERE DOSE CONVERSION FACTOR ANALYSIS

International Nuclear Information System (INIS)

M.A. Wasiolek

2005-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The Biosphere Model Report (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis'' (Figure 1-1). The objective of this analysis was to develop the BDCFs for the volcanic

Post-closure biosphere assessment modelling: comparison of complex and more stylised approaches

Energy Technology Data Exchange (ETDEWEB)

Walke, Russell C. [Quintessa Limited, The Hub, 14 Station Road, Henley-on-Thames (United Kingdom); Kirchner, Gerald [University of Hamburg, ZNF, Beim Schlump 83, 20144 Hamburg (Germany); Xu, Shulan; Dverstorp, Bjoern [Swedish Radiation Safety Authority, SE-171 16 Stockholm (Sweden)

2014-07-01

Geological facilities are the preferred option for disposal of high-level radioactive waste, due to their potential to provide isolation from the surface environment (biosphere) on very long time scales. Safety cases developed in support of geological disposal include assessment of potential impacts on humans and wildlife in order to demonstrate compliance with regulatory criteria. As disposal programmes move from site-independent/generic assessments through site selection to applications for construction/operation and closure, the degree of understanding of the present-day site increases, together with increased site-specific information. Assessments need to strike a balance between simple models and more complex approaches that draw more extensively on this site-specific information. This paper explores the relative merits of complex versus more stylised biosphere models in the context of a site-specific assessment. The complex biosphere model was developed by the Swedish Nuclear Fuel and Waste Management Co (SKB) for the Formark candidate site for a spent nuclear fuel repository in Sweden. SKB's model is built on a landscape evolution model, whereby radionuclide releases to distinct hydrological basins/sub-catchments (termed 'objects') are represented as they evolve through land rise and climate change. The site is located on the Baltic coast with a terrestrial landscape including lakes, mires, forest and agriculture. The land at the site is projected to continue to rise due to post-glacial uplift leading to ecosystem transitions in excess of ten thousand years. The simple biosphere models developed for this study include the most plausible transport processes and represent various types of ecosystem. The complex biosphere models adopt a relatively coarse representation of the near-surface strata, which is shown to be conservative, but also to under-estimate the time scale required for potential doses to reach equilibrium with radionuclide fluxes

BIOSPHERE MODELING AT YUCCA MOUNTAIN, NEVADA

International Nuclear Information System (INIS)

NING LIU; JEFFERY, J.; TAPPEN, DE WU; CHAO-HSIUNG TUNG

1998-01-01

The objectives of the biosphere modeling efforts are to assess how radionuclides potentially released from the proposed repository could be transported through a variety of environmental media. The study of these transport mechanisms, referred to as pathways, is critical in calculating the potential radiation dose to man. Since most of the existing and pending regulations applicable to the Project are radiation dose based standards, the biosphere modeling effort will provide crucial technical input to support the Viability Assessment (VA), the Working Draft of License Application (WDLA), and the Environmental Impact Statement (EIS). In 1982, the Nuclear Waste Policy Act (NWPA) was enacted into law. This federal law, which was amended in 1987, addresses the national issue of geologic disposal of high-level nuclear waste generated by commercial nuclear power plants, as well as defense programs during the past few decades. As required by the law, the Department of Energy (DOE) is conducting a site characterization project at Yucca Mountain, Nevada, approximately 100 miles northwest of Las Vegas, Nevada, to determine if the site is suitable for the nation's first high-level nuclear waste repository

Analysis of Critical Issues in Biosphere Assessment Modelling and Site Investigation

Energy Technology Data Exchange (ETDEWEB)

Egan, M.J.; Thorne, M.C.; Little, R.H.; Pasco, R.F. [Quintessa Limited, Henley-on-Thames (United Kingdom)

2003-07-01

The aim of this document is to present a critical review of issues concerned with the treatment of the biosphere and geosphere-biosphere interface in long-term performance assessment studies for nuclear waste disposal in Sweden. The review covers three main areas of investigation: a review of SKB's plans for undertaking site investigations at candidate locations for the development of a deep geological repository for spent fuel; identification of critical uncertainties associated with SKB's treatment of the geosphere-biosphere interface in recent performance assessments; and a preliminary modelling investigation of the significance of features, events and processes in the near-surface environment in terms of their effect on the accumulation and redistribution of radionuclides at the geosphere-biosphere interface. Overall, SKB's proposals for site investigations are considered to be comprehensive and, if they can be carried out to the specification presented, will constitute a benchmark that other waste management organisations will have to work hard to emulate. The main concern is that expertise for undertaking the investigations and reporting the results could be stretched very thin. The authors have also identified weaknesses in the documentation concerning the collection of evidence for environmental change and on developing scenarios for future environmental change. A fundamental assumption adopted in the renewed assessment of the SFR 1 repository, which is not discussed or justified in any of the documentation that has been reviewed, is that radionuclides enter the water column of the coastal and lake models directly, without passing first through the bed sediments. The modelling study reported herein suggests that SKB's models are robust to range of alternative conceptual descriptions relating to the geosphere-biosphere interface. There are however situations, in which contaminated groundwater is released via sediment rather than directly

Analysis of Critical Issues in Biosphere Assessment Modelling and Site Investigation

International Nuclear Information System (INIS)

Egan, M.J.; Thorne, M.C.; Little, R.H.; Pasco, R.F.

2003-07-01

The aim of this document is to present a critical review of issues concerned with the treatment of the biosphere and geosphere-biosphere interface in long-term performance assessment studies for nuclear waste disposal in Sweden. The review covers three main areas of investigation: a review of SKB's plans for undertaking site investigations at candidate locations for the development of a deep geological repository for spent fuel; identification of critical uncertainties associated with SKB's treatment of the geosphere-biosphere interface in recent performance assessments; and a preliminary modelling investigation of the significance of features, events and processes in the near-surface environment in terms of their effect on the accumulation and redistribution of radionuclides at the geosphere-biosphere interface. Overall, SKB's proposals for site investigations are considered to be comprehensive and, if they can be carried out to the specification presented, will constitute a benchmark that other waste management organisations will have to work hard to emulate. The main concern is that expertise for undertaking the investigations and reporting the results could be stretched very thin. The authors have also identified weaknesses in the documentation concerning the collection of evidence for environmental change and on developing scenarios for future environmental change. A fundamental assumption adopted in the renewed assessment of the SFR 1 repository, which is not discussed or justified in any of the documentation that has been reviewed, is that radionuclides enter the water column of the coastal and lake models directly, without passing first through the bed sediments. The modelling study reported herein suggests that SKB's models are robust to range of alternative conceptual descriptions relating to the geosphere-biosphere interface. There are however situations, in which contaminated groundwater is released via sediment rather than directly to the water column

Linkage analysis in nuclear families. 2: Relationship between affected sib-pair tests and lod score analysis.

Science.gov (United States)

Knapp, M; Seuchter, S A; Baur, M P

1994-01-01

It is believed that the main advantage of affected sib-pair tests is that their application requires no information about the underlying genetic mechanism of the disease. However, here it is proved that the mean test, which can be considered the most prominent of the affected sib-pair tests, is equivalent to lod score analysis for an assumed recessive mode of inheritance, irrespective of the true mode of the disease. Further relationships of certain sib-pair tests and lod score analysis under specific assumed genetic modes are investigated.

The Biosphere International Peer Review

International Nuclear Information System (INIS)

Van Luik, Abraham

2002-01-01

Abe van Luik (US DOE- YM, USA), ended the presentation by giving feedback from the IAEA peer review on the biosphere modelling strategy developed by the DOE Yucca Mountain Site Characterisation Office (YMSCO). This review was based on available international standards and guidance. The peer review team was constituted of both experts from regulatory and waste management organisations and national advisory committees. The implementation of the review consisted of an examination of biosphere reports mainly regarding the modelling and question and answer exchanges. The final report was submitted in April 2000. It contained twenty-three recommendations within two broad classifications; one concerning the regulatory framework, the other one regarding the framework to increase stakeholders' confidence in modelling. The three main categories of recommendations were outlined, namely (i) the DOE' s Biosphere assessment Approach, (ii) the definition of the biosphere system, and (iii) the model development, data and results. Regarding in particular the treatment of the uncertainties in the biosphere, it was viewed as a key issue during the review and thus it will be re-evaluated in the future performance assessment. The summary highlighted most of the recommendations received are to be acted on, and are to be included in the License Application plan for biosphere modelling

Biosphere modelling for safety assessment of geological disposal taking account of denudation of contaminated soils. Research document

International Nuclear Information System (INIS)

Kato, Tomoko

2003-03-01

Biosphere models for safety assessment of geological disposal have been developed on the assumption that the repository-derived radionuclides reach surface environment by groundwater. In the modelling, river, deep well and marine have been considered as geosphere-biosphere (GBIs) and some Japanese-specific ''reference biospheres'' have been developed using an approach consistent with the BIOMOVS II/BIOMASS Reference Biosphere Methodology. In this study, it is assumed that the repository-derived radionuclide would reach surface environment in the form of solid phase by uplift and erosion of contaminated soil and sediment. The radionuclides entered into the surface environment by these processes could be distributed between solid and liquid phases and could spread within the biosphere via solid phase and also liquid phase. Based on these concepts, biosphere model that considers variably saturated zone under surface soil (VSZ) as a GBI was developed for calculating the flux-to-dose conversion factors of three exposure groups (farming, freshwater fishing, marine fishing) based on the Reference Biosphere Methodology. The flux-to-dose conversion factors for faming exposure group were the highest, and ''inhalation of dust'', external irradiation from soil'' and ''ingestion of soil'' were the dominant exposure pathways for most of radionuclides considered in this model. It is impossible to compare the flux-to-dose conversion factors calculated by the biosphere model in this study with those calculated by the biosphere models developed in the previous studies because the migration processes considered when the radionuclides entered the surface environment through the aquifer are different among the models; i.e. it has been assumed that the repository-derived radionuclides entered the GBIs such as river, deep well and marine via groundwater without dilution and retardation at the aquifer in the previous biosphere models. Consequently, it must be modelled the migration of

Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Klos, Richard; Wilmot, Roger [Galson Sciences Ltd (United Kingdom)

2002-09-01

The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference

The SIB Swiss Institute of Bioinformatics' resources: focus on curated databases

OpenAIRE

Bultet, Lisandra Aguilar; Aguilar Rodriguez, Jose; Ahrens, Christian H; Ahrne, Erik Lennart; Ai, Ni; Aimo, Lucila; Akalin, Altuna; Aleksiev, Tyanko; Alocci, Davide; Altenhoff, Adrian; Alves, Isabel; Ambrosini, Giovanna; Pedone, Pascale Anderle; Angelina, Paolo; Anisimova, Maria

2016-01-01

The SIB Swiss Institute of Bioinformatics (www.isb-sib.ch) provides world-class bioinformatics databases, software tools, services and training to the international life science community in academia and industry. These solutions allow life scientists to turn the exponentially growing amount of data into knowledge. Here, we provide an overview of SIB's resources and competence areas, with a strong focus on curated databases and SIB's most popular and widely used resources. In particular, SIB'...

Identification of Mendelian inconsistencies between SNP and pedigree information of sibs

Directory of Open Access Journals (Sweden)

Calus Mario PL

2011-10-01

Full Text Available Abstract Background Using SNP genotypes to apply genomic selection in breeding programs is becoming common practice. Tools to edit and check the quality of genotype data are required. Checking for Mendelian inconsistencies makes it possible to identify animals for which pedigree information and genotype information are not in agreement. Methods Straightforward tests to detect Mendelian inconsistencies exist that count the number of opposing homozygous marker (e.g. SNP genotypes between parent and offspring (PAR-OFF. Here, we develop two tests to identify Mendelian inconsistencies between sibs. The first test counts SNP with opposing homozygous genotypes between sib pairs (SIBCOUNT. The second test compares pedigree and SNP-based relationships (SIBREL. All tests iteratively remove animals based on decreasing numbers of inconsistent parents and offspring or sibs. The PAR-OFF test, followed by either SIB test, was applied to a dataset comprising 2,078 genotyped cows and 211 genotyped sires. Theoretical expectations for distributions of test statistics of all three tests were calculated and compared to empirically derived values. Type I and II error rates were calculated after applying the tests to the edited data, while Mendelian inconsistencies were introduced by permuting pedigree against genotype data for various proportions of animals. Results Both SIB tests identified animal pairs for which pedigree and genomic relationships could be considered as inconsistent by visual inspection of a scatter plot of pairwise pedigree and SNP-based relationships. After removal of 235 animals with the PAR-OFF test, SIBCOUNT (SIBREL identified 18 (22 additional inconsistent animals. Seventeen animals were identified by both methods. The numbers of incorrectly deleted animals (Type I error, were equally low for both methods, while the numbers of incorrectly non-deleted animals (Type II error, were considerably higher for SIBREL compared to SIBCOUNT. Conclusions

Causes and timing of future biosphere extinctions

Directory of Open Access Journals (Sweden)

S. Franck

2006-01-01

Full Text Available We present a minimal model for the global carbon cycle of the Earth containing the reservoirs mantle, ocean floor, continental crust, biosphere, and the kerogen, as well as the combined ocean and atmosphere reservoir. The model is specified by introducing three different types of biosphere: procaryotes, eucaryotes, and complex multicellular life. During the entire existence of the biosphere procaryotes are always present. 2 Gyr ago eucaryotic life first appears. The emergence of complex multicellular life is connected with an explosive increase in biomass and a strong decrease in Cambrian global surface temperature at about 0.54 Gyr ago. In the long-term future the three types of biosphere will die out in reverse sequence of their appearance. We show that there is no evidence for an implosion-like extinction in contrast to the Cambrian explosion. In dependence of their temperature tolerance complex multicellular life and eucaryotes become extinct in about 0.8–1.2 Gyr and 1.3–1.5 Gyr, respectively. The ultimate life span of the biosphere is defined by the extinction of procaryotes in about 1.6 Gyr.

NACP Site: Terrestrial Biosphere Model Output Data in Original Format

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set contains the original model output data submissions from the 24 terrestrial biosphere models (TBM) that participated in the North American...

NACP Site: Terrestrial Biosphere Model Output Data in Original Format

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains the original model output data submissions from the 24 terrestrial biosphere models (TBM) that participated in the North American Carbon...

The landscape-scale radionuclide transport model used in Posiva biosphere assessment 2012

Energy Technology Data Exchange (ETDEWEB)

Broed, R. [Facilia A (Finland); Hjerpe, T. [Facilia AB (Finland); Ikonen, A.T.K. [Environmental Research and Assessment EnviroCase, Ltd. (Finland)

2014-07-01

Construction of a deep geological repository for spent nuclear fuel in the Olkiluoto Island on the south-western coast of Finland is under preparation. This work presents the reference landscape-scale model for radionuclide fate and transport in the biosphere that was implemented as a part of the safety case underpinning the nuclear construction license of the repository in 2012. The model was implemented with a large number of biosphere objects, covering any radiologically significant areas of the site and downstream locations, in order to account for the uncertainty in the geosphere release location. One important factor considered is the effect of land uplift, which has the consequence that the modelled landscape evolves with time, i.e. new land areas is continuously emerging from the sea and by overgrowth of lakes, and the modelled biosphere objects can change their biotope and composition over time. For example, a biosphere object that initially represents a part of the coast, can due to the land uplift eventually represent a lake. This lake might then at a later stage have dried up and formed a wetland that eventually is turned into a cropland. This means that the ecosystem-specific model parts used in one biosphere object, the related model parameters, and the available exposure pathways vary with time. A time-period of 10,000 years is simulated, with the assumption that a single spent fuel disposal canister initially fails its containment functions. The resulting activity concentrations in the environmental media that are produced by the simulation with the landscape model are used to estimate the doses to members of the public and dose-rates to non-human biota inhabiting the modelled region. In this work the focus is on the reference case model which represents a defective canister in a deposition hole that is cautiously selected, leading to geosphere releases just north of the current northern shoreline, but also a brief overview of two alternative models

Comparison of biospheric models of radionuclides transfer

International Nuclear Information System (INIS)

Garcia-Olivares, A.; Carrasco, E.

1992-01-01

The international BIOMOVS A4 exercise has made possible that a set of biospheric transfer models could predict the daily radionuclide concentration in soils, forage and some animal products (cow milk and beef) after the Chernobyl accident. The aim was to compare these predictions with experimental results in 13 locations around the world. The data provided were essentially the daily air contamination and precipitation and some site-dependent parameters. It was a blind test, the locations and experimental measures were not revealed in advance. Twenty-three models (quasi-steady state and time-dependent models) were involved in the study. In this paper an explicit criterion has been used in order to select the models that better fitted the experimental results. In nine selected locations a comparative analysis between these models has been carried out for obtaining the structural and parametric coincidences that could explain their relatively good performance. The first evidence obtained has been that a wide set of models were able to predict the order of magnitude of the nuclides time-integrated concentrations in several important biospheric comportments. But only a few models, all of them with a 'dynamical' structure, fitted the daily behavior with the reasonable agreement. The dynamical structure of the five most successful models at predicting for Caesium 137 (CIRCLE, ECOSYS, PATHWAY, PRYMA and RAGTIME) shows some common patterns that may be relevant for a better modelling of nuclear accident scenarios. (author)

Sensitivity properties of a biosphere model based on BATS and a statistical-dynamical climate model

Energy Technology Data Exchange (ETDEWEB)

Zhang, T. (Yale Univ., New Haven, CT (United States))

1994-06-01

A biosphere model based on the Biosphere-Atmosphere Transfer Scheme (BATS) and the Saltzman-Vernekar (SV) statistical-dynamical climate model is developed. Some equations of BATS are adopted either intact or with modifications, some are conceptually modified, and still others are replaced with equations of the SV model. The model is designed so that it can be run independently as long as the parameters related to the physiology and physiognomy of the vegetation, the atmospheric conditions, solar radiation, and soil conditions are given. With this stand-alone biosphere model, a series of sensitivity investigations, particularly the model sensitivity to fractional area of vegetation cover, soil surface water availability, and solar radiation for different types of vegetation, were conducted as a first step. These numerical experiments indicate that the presence of a vegetation cover greatly enhances the exchanges of momentum, water vapor, and energy between the atmosphere and the surface of the earth. An interesting result is that a dense and thick vegetation cover tends to serve as an environment conditioner or, more specifically, a thermostat and a humidistat, since the soil surface temperature, foliage temperature, and temperature and vapor pressure of air within the foliage are practically insensitive to variation of soil surface water availability and even solar radiation within a wide range. An attempt is also made to simulate the gradual deterioration of environment accompanying gradual degradation of a tropical forest to grasslands. Comparison with field data shows that this model can realistically simulate the land surface processes involving biospheric variations. 46 refs., 10 figs., 6 tabs.

Radioactive waste disposal assessment - overview of biosphere processes and models

International Nuclear Information System (INIS)

Coughtrey, P.J.

1992-09-01

This report provides an overview of biosphere processes and models in the general context of the radiological assessment of radioactive waste disposal as a basis for HMIP's response to biosphere aspects of Nirex's submissions for disposal of radioactive wastes in a purpose-built repository at Sellafield, Cumbria. The overview takes into account published information from the UK as available from Nirex's safety and assessment research programme and HMIP's disposal assessment programme, as well as that available from studies in the UK and elsewhere. (Author)

Nominal Performance Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M.A. Wasiolek

2005-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standards. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis'' (Figure 1-1). The objectives of this analysis are to develop BDCFs for the

Interim report on reference biospheres for radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Dorp, F. van [NAGRA (Switzerland)] [and others

1994-10-01

significant effect on biosphere modelling, for normal and accidental releases from nuclear installations, and also for waste disposal. For example, increased attention is being given to natural and semi-natural environments. Against this background, the primary objective of the BIOMOVS II Reference Biospheres Working Group is to establish a consensus on the development and application of a Reference Biosphere approach to the evaluation of long-term radiological consequences of solid radioactive waste disposal systems. The Working Group is expecting to provide: 1. A recommended methodology for biosphere analysis within the assessment of radioactive waste disposal, which is consistent for different types of radioactive waste and disposal concepts. This should include the justification, arguments and documentation for all the steps in the recommended methodology. A preliminary illustration of the approach is shown in the figure opposite. 2. An internationally developed and structured list of Features, Events and Processes (FEPs), which can be used to support the development of biosphere models for specific assessments. 3. Example(s) of how to apply the methodology. If these examples are developed in a suitably generic assessment context, they can be defined as generic 'Reference Biospheres' and their applicability and limitations should be identified. Such 'Reference Biospheres' could then be used e.g: (a) for generic site independent evaluation of disposal plans; (b) to provide sets of factors to convert geosphere release into doses or risks; (c) as 'stylised biospheres' (which might be defined as a biosphere which contains only the most essential FEPs); (d) as benchmarks for comparisons with other assessments, and (e) as sources of detailed information on biosphere modelling for waste disposal assessments. In order to complete an assessment of a particular site, there will not only be a need to take account of site specific issues, such as the

Interim report on reference biospheres for radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Dorp, F van [NAGRA (Switzerland); and others

1994-10-01

significant effect on biosphere modelling, for normal and accidental releases from nuclear installations, and also for waste disposal. For example, increased attention is being given to natural and semi-natural environments. Against this background, the primary objective of the BIOMOVS II Reference Biospheres Working Group is to establish a consensus on the development and application of a Reference Biosphere approach to the evaluation of long-term radiological consequences of solid radioactive waste disposal systems. The Working Group is expecting to provide: 1. A recommended methodology for biosphere analysis within the assessment of radioactive waste disposal, which is consistent for different types of radioactive waste and disposal concepts. This should include the justification, arguments and documentation for all the steps in the recommended methodology. A preliminary illustration of the approach is shown in the figure opposite. 2. An internationally developed and structured list of Features, Events and Processes (FEPs), which can be used to support the development of biosphere models for specific assessments. 3. Example(s) of how to apply the methodology. If these examples are developed in a suitably generic assessment context, they can be defined as generic 'Reference Biospheres' and their applicability and limitations should be identified. Such 'Reference Biospheres' could then be used e.g: (a) for generic site independent evaluation of disposal plans; (b) to provide sets of factors to convert geosphere release into doses or risks; (c) as 'stylised biospheres' (which might be defined as a biosphere which contains only the most essential FEPs); (d) as benchmarks for comparisons with other assessments, and (e) as sources of detailed information on biosphere modelling for waste disposal assessments. In order to complete an assessment of a particular site, there will not only be a need to take account of site specific issues, such as the geosphere-biosphere interface and

NACP Regional: Original Observation Data and Biosphere and Inverse Model Outputs

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains the originally-submitted observation measurement data, terrestrial biosphere model output data, and inverse model simulations that various...

NACP Regional: Original Observation Data and Biosphere and Inverse Model Outputs

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set contains the originally-submitted observation measurement data, terrestrial biosphere model output data, and inverse model simulations that...

On the CO2 exchange between the atmosphere and the biosphere: the role of synoptic and mesoscale processes

International Nuclear Information System (INIS)

Chan, Douglas; Higuchi, Kaz; Shashkov, Alexander; Worthy, Douglas; Liu, Jane; Chen Jing; Yuen Chiu Wai

2004-01-01

Estimating global carbon fluxes by inverting atmospheric CO 2 through the use of atmospheric transport models has shown the importance of the covariance between biospheric fluxes and atmospheric transport on the carbon budget. This covariance or coupling occurs on many time scales. This study examines the coupling of the biosphere and the atmosphere on the meso- and synoptic scales using a coupled atmosphere-biosphere regional model covering Canada. The results are compared with surface and light aircraft measurement campaigns at two boreal forest sites in Canada. Associated with cold and warm frontal features, the model results showed that the biospheric fluxes are strongly coupled to the atmosphere through radiative forcing. The presence of cloud near frontal regions usually results in reduced photosynthetic uptake, producing CO 2 concentration gradients across the frontal regions on the order of 10 parts per million (ppm). Away from the frontal region, the biosphere is coupled to the mesoscale variations in similar ways, resulting in mesoscale variations in CO 2 concentrations of about 5 ppm. The CO 2 field is also coupled strongly to the atmospheric dynamics. In the presence of frontal circulation, the CO 2 near the surface can be transported to the mid to upper troposphere. Mesoscale circulation also plays a significant part in transporting the CO 2 from the planetary boundary layer (PBL) to the mid-troposphere. In the absence of significant mesoscale or synoptic scale circulation, the CO 2 in the PBL has minimal exchange with the free troposphere, leading to strong gradients across the top of the PBL. We speculate that the ubiquity of the common synoptic and mesoscale processes in the atmosphere may contribute significantly to the rectifier effect and hence CO 2 inversion calculations

Sequential optimization of a terrestrial biosphere model constrained by multiple satellite based products

Science.gov (United States)

Ichii, K.; Kondo, M.; Wang, W.; Hashimoto, H.; Nemani, R. R.

2012-12-01

Various satellite-based spatial products such as evapotranspiration (ET) and gross primary productivity (GPP) are now produced by integration of ground and satellite observations. Effective use of these multiple satellite-based products in terrestrial biosphere models is an important step toward better understanding of terrestrial carbon and water cycles. However, due to the complexity of terrestrial biosphere models with large number of model parameters, the application of these spatial data sets in terrestrial biosphere models is difficult. In this study, we established an effective but simple framework to refine a terrestrial biosphere model, Biome-BGC, using multiple satellite-based products as constraints. We tested the framework in the monsoon Asia region covered by AsiaFlux observations. The framework is based on the hierarchical analysis (Wang et al. 2009) with model parameter optimization constrained by satellite-based spatial data. The Biome-BGC model is separated into several tiers to minimize the freedom of model parameter selections and maximize the independency from the whole model. For example, the snow sub-model is first optimized using MODIS snow cover product, followed by soil water sub-model optimized by satellite-based ET (estimated by an empirical upscaling method; Support Vector Regression (SVR) method; Yang et al. 2007), photosynthesis model optimized by satellite-based GPP (based on SVR method), and respiration and residual carbon cycle models optimized by biomass data. As a result of initial assessment, we found that most of default sub-models (e.g. snow, water cycle and carbon cycle) showed large deviations from remote sensing observations. However, these biases were removed by applying the proposed framework. For example, gross primary productivities were initially underestimated in boreal and temperate forest and overestimated in tropical forests. However, the parameter optimization scheme successfully reduced these biases. Our analysis

The PSACOIN level 1B exercise: A probabilistic code intercomparison involving a four compartment biosphere model

International Nuclear Information System (INIS)

Klos, R.A.; Sinclair, J.E.; Torres, C.; Mobbs, S.F.; Galson, D.A.

1991-01-01

The probabilistic Systems Assessment Code (PSAC) User Group of the OECD Nuclear Energy Agency has organised a series of code intercomparison studies of relevance to the performance assessment of underground repositories for radioactive wastes - known collectively by the name PSACOIN. The latest of these to be undertaken is designated PSACOIN Level 1b, and the case specification provides a complete assessment model of the behaviour of radionuclides following release into the biosphere. PSACOIN Level 1b differs from other biosphere oriented intercomparison exercises in that individual dose is the end point of the calculations as opposed to any other intermediate quantity. The PSACOIN Level 1b case specification describes a simple source term which is used to simulate the release of activity to the biosphere from certain types of near surface waste repository, the transport of radionuclides through the biosphere and their eventual uptake by humankind. The biosphere sub model comprises 4 compartments representing top and deep soil layers, river water and river sediment. The transport of radionuclides between the physical compartments is described by ten transfer coefficients and doses to humankind arise from the simultaneous consumption of water, fish, meat, milk, and grain as well as from dust inhalation and external γ-irradiation. The parameters of the exposure pathway sub model are chosen to be representative of an individual living in a small agrarian community. (13 refs., 3 figs., 2 tabs.)

Overview of the development of a biosphere modelling capability for UK DoE (HMIP)

International Nuclear Information System (INIS)

Nancarrow, D.J.; Ashton, J.; Little, R.H.

1990-01-01

A programme of research has been funded, since 1982, by the United Kingdom Department of the Environment (Her Majesty's Inspectorate of Pollution, HMIP), to develop a procedure for post-closure radiological assessment of underground disposal facilities for low and intermediate level radioactive wastes. It is conventional to regard the disposal system as comprising the engineered barriers of the repository, the geological setting which provides natural barriers to migration, and the surface environment or biosphere. The requirement of a biosphere submodel, therefore, is to provide estimates, for given radionuclide inputs, of the dose or probability distribution function of dose to a maximally exposed individual as a function of time. This paper describes the development of the capability for biosphere modelling for HMIP in the context of the development of other assessment procedures. 11 refs., 3 figs., 2 tabs

Nominal Performance Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek

2005-04-28

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standards. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis

Interim report on reference biospheres for radioactive waste disposal

International Nuclear Information System (INIS)

Dorp, F. van

1994-10-01

significant effect on biosphere modelling, for normal and accidental releases from nuclear installations, and also for waste disposal. For example, increased attention is being given to natural and semi-natural environments. Against this background, the primary objective of the BIOMOVS II Reference Biospheres Working Group is to establish a consensus on the development and application of a Reference Biosphere approach to the evaluation of long-term radiological consequences of solid radioactive waste disposal systems. The Working Group is expecting to provide: 1. A recommended methodology for biosphere analysis within the assessment of radioactive waste disposal, which is consistent for different types of radioactive waste and disposal concepts. This should include the justification, arguments and documentation for all the steps in the recommended methodology. A preliminary illustration of the approach is shown in the figure opposite. 2. An internationally developed and structured list of Features, Events and Processes (FEPs), which can be used to support the development of biosphere models for specific assessments. 3. Example(s) of how to apply the methodology. If these examples are developed in a suitably generic assessment context, they can be defined as generic 'Reference Biospheres' and their applicability and limitations should be identified. Such 'Reference Biospheres' could then be used e.g: a) for generic site independent evaluation of disposal plans; b) to provide sets of factors to convert geosphere release into doses or risks; c) as 'stylised biospheres' (which might be defined as a biosphere which contains only the most essential FEPs); d) as benchmarks for comparisons with other assessments, and e) as sources of detailed information on biosphere modelling for waste disposal assessments. In order to complete an assessment of a particular site, there will not only be a need to take account of site specific issues, such as the geosphere-biosphere interface and the

Short description of the BIOS-model, and selection of biosphere parameters to be used in radionuclide transport and dose

International Nuclear Information System (INIS)

Jong, E.J. de; Koester, H.W.; Vries, W.J. de.

1990-02-01

In the framework of the PACOMA-project (Performance assessment of confinements for medium and alpha waste), initiated by the European Commission, possible future radiation doses, due to contamination of the biosphere by radionuclides originating from radioactive waste disposed in salt-formations, were calculated. In all cases considered radionuclides coming out of the geosphere enter a river. For the biosphere calculations the BIOS-model, developed by the NRPB in England, is used. A short description of the model, as well as of the adjustments made at the RIVM to calculate the total individual and collective doses and the subdoses of different exposure pathways is given. The values of biosphere parameters selected for the model are presented, together with the literature consulted. (author). 17 refs., 3 figs.; 2 tabs

Nominal Performance Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek

2003-07-25

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standard. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports (BSC 2003 [DIRS 160964]; BSC 2003 [DIRS 160965]; BSC 2003 [DIRS 160976]; BSC 2003 [DIRS 161239]; BSC 2003 [DIRS 161241]) contain detailed description of the model input parameters. This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. The objectives of this analysis are to develop BDCFs and conversion factors for the TSPA. The BDCFs will be used in performance assessment for calculating annual doses for a given concentration of radionuclides in groundwater. The conversion factors will be used for calculating gross alpha particle activity in groundwater and the annual dose from beta- and photon-emitting radionuclides.

Modeling the impact of climate change in Germany with biosphere models for long-term safety assessment of nuclear waste repositories

International Nuclear Information System (INIS)

Staudt, C.; Semiochkina, N.; Kaiser, J.C.; Pröhl, G.

2013-01-01

Biosphere models are used to evaluate the exposure of populations to radionuclides from a deep geological repository. Since the time frame for assessments of long-time disposal safety is 1 million years, potential future climate changes need to be accounted for. Potential future climate conditions were defined for northern Germany according to model results from the BIOCLIM project. Nine present day reference climate regions were defined to cover those future climate conditions. A biosphere model was developed according to the BIOMASS methodology of the IAEA and model parameters were adjusted to the conditions at the reference climate regions. The model includes exposure pathways common to those reference climate regions in a stylized biosphere and relevant to the exposure of a hypothetical self-sustaining population at the site of potential radionuclide contamination from a deep geological repository. The end points of the model are Biosphere Dose Conversion factors (BDCF) for a range of radionuclides and scenarios normalized for a constant radionuclide concentration in near-surface groundwater. Model results suggest an increased exposure of in dry climate regions with a high impact of drinking water consumption rates and the amount of irrigation water used for agriculture. - Highlights: ► We model Biosphere Dose Conversion Factors for a representative group exposed to radionuclides from a waste repository. ► The BDCF are modeled for different soil types. ► One model is used for the assessment of the influence of climate change during the disposal time frame.

Nominal Performance Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-08

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standard. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. The objectives of this analysis are to develop BDCFs for the groundwater exposure scenario for the three climate states considered in the TSPA-LA as well as conversion factors for evaluating compliance with the groundwater protection standard. The BDCFs will be used in performance assessment for calculating all-pathway annual doses for a given concentration of radionuclides in groundwater. The conversion factors will be used for calculating gross alpha particle

Nominal Performance Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standard. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. The objectives of this analysis are to develop BDCFs for the groundwater exposure scenario for the three climate states considered in the TSPA-LA as well as conversion factors for evaluating compliance with the groundwater protection standard. The BDCFs will be used in performance assessment for calculating all-pathway annual doses for a given concentration of radionuclides in groundwater. The conversion factors will be used for calculating gross alpha particle activity in groundwater and the annual dose

Transport of radionuclides in the biosphere

International Nuclear Information System (INIS)

Bundi, A.

1983-10-01

The dispersion of radionuclides in the biosphere and their uptake by man via various nutritional pathways is studied using a compartment model. The sample environment is the area of the lower Limmat and Aare valleys. General considerations of the compartmental description of the biosphere are made. The problem of the description of surface features, in particular soil, sediment and water, is studied in detail using the code BIOPATH. This study is intended to be an example of how a model of the biosphere could be constructed. It is shown that this is a reasonable model to calculate the spreading of radionuclides in the biosphere and that it indicates the relative significance of individual compartments, pathways and radionuclides. Calculated values of dose committment, however, should not be used as reference data for safety analyses. (Auth.)

Exchange Processes at Geosphere-Biosphere Interface

International Nuclear Information System (INIS)

Worman, A.; Sjogren, B.; Dverstorp, B.; Xu, S.

2004-01-01

The radioecological models included in performance assessments to date by the Swedish nuclear industry for existing and planned nuclear waste repositories do not explicitly represent the transport of radionuclides from bedrock into the near-surface geological environment. It has been argued that bypassing the transition zone from the bedrock to the quarternary deposits and the biosphere (the geosphere-biosphere interface, GBI) leads to conservative estimates of estimated doses and risk. This study demonstrates that this may not always be true. The study is based on an integrated model representation of a release of radionuclides from a hypothetical repository, transport through the crystalline bedrock and the near-surface deposits to the biosphere. A three-dimensional flow model is developed, which has a fairly accurate description of both surface and groundwater hydrology and is coupled to radioecological models. The development has great significance for estimation of flow field at the repository level as well as for estimation of transport pathways and residence time distributions for radionuclides. The modelling approach is based on the characterisation of radionuclide residence times in the bedrock and the quaternary deposits, as well as the distribution of radionuclides in ecosystems. Simulation examples are presented to illustrate the relative importance of transport processes in the quaternary sediments and the hydraulic interaction between the bedrock, quaternary deposits and various ecosystems. The modelling results show that, in many cases, taking into account the biosphere-geosphere interface leads to a delay of radionuclide arrival to the biosphere. For other conditions, the more precise prediction of radionuclide ex-filtration locations in the biosphere can result in higher environmental concentrations compared with estimates based on diluting radionuclide in a large area. An improved representation of these processes will enhance our understanding of

Coupling a groundwater model with a land surface model to improve water and energy cycle simulation

Directory of Open Access Journals (Sweden)

W. Tian

2012-12-01

Full Text Available Water and energy cycles interact, making these two processes closely related. Land surface models (LSMs can describe the water and energy cycles on the land surface, but their description of the subsurface water processes is oversimplified, and lateral groundwater flow is ignored. Groundwater models (GWMs describe the dynamic movement of the subsurface water well, but they cannot depict the physical mechanisms of the evapotranspiration (ET process in detail. In this study, a coupled model of groundwater flow with a simple biosphere (GWSiB is developed based on the full coupling of a typical land surface model (SiB2 and a 3-D variably saturated groundwater model (AquiferFlow. In this coupled model, the infiltration, ET and energy transfer are simulated by SiB2 using the soil moisture results from the groundwater flow model. The infiltration and ET results are applied iteratively to drive the groundwater flow model. After the coupled model is built, a sensitivity test is first performed, and the effect of the groundwater depth and the hydraulic conductivity parameters on the ET are analyzed. The coupled model is then validated using measurements from two stations located in shallow and deep groundwater depth zones. Finally, the coupled model is applied to data from the middle reach of the Heihe River basin in the northwest of China to test the regional simulation capabilities of the model.

Biospheric feedback effects in a synchronously coupled model of human and Earth systems

Energy Technology Data Exchange (ETDEWEB)

Thornton, Peter E.; Calvin, Katherine V.; Jones, Andrew D.; Di Vittorio, Alan; Bond-Lamberty, Benjamin; Chini, Louise M.; Shi, Xiaoying; Mao, Jiafu; Collins, William D.; Edmonds, James A.; Thomson, Allison M.; Truesdale, John E.; Craig, Anthony P.; Branstetter, M.; Hurtt, George C.

2017-06-12

Fossil fuel combustion and land-use change are the first and second largest contributors to industrial-era increases in atmospheric carbon dioxide concentration, which is itself the largest driver of present-day climate change1. Projections of fossil fuel consumption and land-use change are thus fundamental inputs for coupled Earth system models (ESM) used to estimate the physical and biological consequences of future climate system forcing2,3. While empirical datasets are available to inform historical analyses4,5, assessments of future climate change have relied on projections of energy and land use based on energy economic models, constrained using historical and present-day data and forced with assumptions about future policy, land-use patterns, and socio-economic development trajectories6. Here we show that the influence of biospheric change – the integrated effect of climatic, ecological, and geochemical processes – on land ecosystems has a significant impact on energy, agriculture, and land-use projections for the 21st century. Such feedbacks have been ignored in previous ESM studies of future climate. We find that synchronous exposure of land ecosystem productivity in the economic system to biospheric change as it develops in an ESM results in a 10% reduction of land area used for crop cultivation; increased managed forest area and land carbon; a 15-20% decrease in global crop price; and a 17% reduction in fossil fuel emissions for a low-mid range forcing scenario7. These simulation results demonstrate that biospheric change can significantly alter primary human system forcings to the climate system. This synchronous two-way coupling approach removes inconsistencies in description of climate change between human and biosphere components of the coupled model, mitigating a major source of uncertainty identified in assessments of future climate projections8-10.

Earth's early biosphere

Science.gov (United States)

Des Marais, D. J.

1998-01-01

Understanding our own early biosphere is essential to our search for life elsewhere, because life arose on Earth very early and rocky planets shared similar early histories. The biosphere arose before 3.8 Ga ago, was exclusively unicellular and was dominated by hyperthermophiles that utilized chemical sources of energy and employed a range of metabolic pathways for CO2 assimilation. Photosynthesis also arose very early. Oxygenic photosynthesis arose later but still prior to 2.7 Ga. The transition toward the modern global environment was paced by a decline in volcanic and hydrothermal activity. These developments allowed atmospheric O2 levels to increase. The O2 increase created new niches for aerobic life, most notably the more advanced Eukarya that eventually spawned the megascopic fauna and flora of our modern biosphere.

Biosphere 2: a prototype project for a permanent and evolving life system for Mars base.

Science.gov (United States)

Nelson, M; Allen, J P; Dempster, W F

1992-01-01

As part of the ground-based preparation for creating long-term life systems needed for space habitation and settlement, Space Biospheres Ventures (SBV) is undertaking the Biosphere 2 project near Oracle, Arizona. Biosphere 2, currently under construction, is scheduled to commence its operations in 1991 with a two-year closure period with a crew of eight people. Biosphere 2 is a facility which will be essentialy materially-closed to exchange with the outside environment. It is open to information and energy flow. Biosphere 2 is designed to achieve a complex life-support system by the integration of seven areas or "biomes"--rainforest, savannah, desert, marsh, ocean, intensive agriculture and human habitat. Unique bioregenerative technologies, such as soil bed reactors for air purification, aquatic waste processing systems, real-time analytic systems and complex computer monitoring and control systems are being developed for the Biosphere 2 project. Its operation should afford valuable insight into the functioning of complex life systems necessary for long-term habitation in space. It will serve as an experimental ground-based prototype and testbed for the stable, permanent life systems needed for human exploration of Mars.

Predicting ecosystem dynamics at regional scales: an evaluation of a terrestrial biosphere model for the forests of northeastern North America.

Science.gov (United States)

Medvigy, David; Moorcroft, Paul R

2012-01-19

Terrestrial biosphere models are important tools for diagnosing both the current state of the terrestrial carbon cycle and forecasting terrestrial ecosystem responses to global change. While there are a number of ongoing assessments of the short-term predictive capabilities of terrestrial biosphere models using flux-tower measurements, to date there have been relatively few assessments of their ability to predict longer term, decadal-scale biomass dynamics. Here, we present the results of a regional-scale evaluation of the Ecosystem Demography version 2 (ED2)-structured terrestrial biosphere model, evaluating the model's predictions against forest inventory measurements for the northeast USA and Quebec from 1985 to 1995. Simulations were conducted using a default parametrization, which used parameter values from the literature, and a constrained model parametrization, which had been developed by constraining the model's predictions against 2 years of measurements from a single site, Harvard Forest (42.5° N, 72.1° W). The analysis shows that the constrained model parametrization offered marked improvements over the default model formulation, capturing large-scale variation in patterns of biomass dynamics despite marked differences in climate forcing, land-use history and species-composition across the region. These results imply that data-constrained parametrizations of structured biosphere models such as ED2 can be successfully used for regional-scale ecosystem prediction and forecasting. We also assess the model's ability to capture sub-grid scale heterogeneity in the dynamics of biomass growth and mortality of different sizes and types of trees, and then discuss the implications of these analyses for further reducing the remaining biases in the model's predictions.

Testing of environmental transfer models using Chernobyl fallout data from the Iput River catchment area, Bryansk Region, Russian Federation. Report of the Dose Reconstruction Working Group of BIOMASS Theme 2. Part of the IAEA Co-ordinated Research Project on Biosphere Modelling and Assessment (BIOMASS)

International Nuclear Information System (INIS)

2003-04-01

The IAEA Programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in Vienna in October 1996. The programme was concerned with developing and improving capabilities to predict the transfer of radionuclides in the environment. The programme had three themes: Theme 1: Radioactive Waste Disposal. The objective was to develop the concept of a standard or reference biosphere for application to the assessment of the long term safety of repositories for radioactive waste. Under the general heading of 'Reference Biospheres', six Task Groups were established: Task Group 1: Principles for the Definition of Critical and Other Exposure Groups. Task Group 2: Principles for the Application of Data to Assessment Models. Task Group 3: Consideration of Alternative Assessment Contexts. Task Group 4: Biosphere System Identification and Justification. Task Group 5: Biosphere System Descriptions. Task Group 6: Model Development. Theme 2: Environmental Releases. BIOMASS provided an international forum for activities aimed at increasing the confidence in methods and models for the assessment of radiation exposure related to environmental releases. Two working groups addressed issues concerned with the reconstruction of radiation doses received by people from past releases of radionuclides to the environment and the evaluation of the efficacy of remedial measures. Theme 3: Biosphere Processes. The aim of this theme was to improve capabilities for modelling the transfer of radionuclides in particular parts of the biosphere identified as being of potential radiological significance and where there were gaps in modelling approaches. This topic was explored using a range of methods including reviews of the literature, model inter-comparison exercises and, where possible, model testing against independent sources of data. Three working groups were established to examine the modelling of: (1) long term tritium dispersion in the environment; (2) radionuclide uptake by fruits; and (3

The life span of the biosphere revisited

Science.gov (United States)

Caldeira, Ken; Kasting, James F.

1992-01-01

How much longer the biosphere can survive on earth is reexamined using a more elaborate model than that of Lovelock and Whitfield (1982). The model includes a more accurate treatment of the greenhouse effect of CO2, a biologically mediated weathering parametrization, and the realization that C4 photosynthesis can persist to much lower concentrations of atmospheric CO2. It is found that a C4-plant-based biosphere could survive for at least another 0.9 Gyr to 1.5 Gyr after the present time, depending respectively on whether CO2 or temperature is the limiting factor. Within an additional 1 Gyr, earth may lose water to space, thereby following the path of Venus.

Developpement of a GoldSim Biosphere Model, Evaluation, and Its Verification

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo

2009-12-01

For the purpose of evaluating dose rate to individual due to long-term release of nuclides from the repository for an HLW or a pyroprocessing repository, a biosphere assessment model and the implemented program based on BIOMASS methodology have been developed by utilizing GoldSim, a general model developing tool. To show its practicability and usability as well as to see the sensitivity of parametric and scenario variations to the annual exposure, some probabilistic calculations are made and investigated. For the cases when changing the exposure groups and associated GBIs as well as varying selected input values, all of which seem important for the biosphere evaluation, dose rate per nuclide release rate is probabilistically calculated and analyzed. A series of comparison studies with JAEA, Japan have been also carried out to verify the model

A comparative Study between GoldSim and AMBER Based Biosphere Assessment Models for an HLW Repository

International Nuclear Information System (INIS)

Lee, Youn-Myoung; Hwang, Yong-Soo

2007-01-01

To demonstrate the performance of a repository, the dose exposure rate to human being due to long-term nuclide releases from a high-level waste repository (HLW) should be evaluated and the results compared to the dose limit presented by the regulatory bodies. To evaluate such a dose rate to an individual, biosphere assessment models have been developed and implemented for a practical calculation with the aid of such commercial tools as AMBER and GoldSim, both of which are capable of probabilistic and deterministic calculation. AMBER is a general purpose compartment modeling tool and GoldSim is another multipurpose simulation tool for dynamically modeling complex systems, supporting a higher graphical user interface than AMBER and a postprocessing feature. And also unlike AMBER, any kind of compartment scheme can be rather simply constructed with an appropriate transition rate between compartments, GoldSim is designed to facilitate the object-oriented modules to address any specialized programs, similar to solving jig saw puzzles. During the last couple of years a compartment modeling approach for a biosphere has been mainly carried out with AMBER in KAERI in order to conservatively or rather roughly provide dose conversion factors to get the final exposure rate due to a nuclide flux into biosphere over various geosphere-biosphere interfaces (GBIs) calculated through nuclide transport modules. This caused a necessity for a newly devised biosphere model that could be coupled to a nuclide transport model with less conservatism in the frame of the development of a total system performance assessment modeling tool, which could be successfully done with the aid of GoldSim. Therefore, through the current study, some comparison results of the AMBER and the GoldSim approaches for the same case of a biosphere modeling without any consideration of geosphere transport are introduced by extending a previous study

Association study of 25 type 2 diabetes related Loci with measures of obesity in Indian sib pairs.

Science.gov (United States)

Gupta, Vipin; Vinay, Donipadi Guru; Sovio, Ulla; Rafiq, Sajjad; Kranthi Kumar, Madamchetty Venkata; Janipalli, Charles Spurgeon; Evans, David; Mani, Kulathu Radha; Sandeep, Madana Narasimha; Taylor, Amy; Kinra, Sanjay; Sullivan, Ruth; Bowen, Liza; Timpson, Nicholas; Smith, George Davey; Dudbridge, Frank; Prabhakaran, Dorairaj; Ben-Shlomo, Yoav; Reddy, Kolli Srinath; Ebrahim, Shah; Chandak, Giriraj Ratan

2013-01-01

Obesity is an established risk factor for type 2 diabetes (T2D) and they are metabolically related through the mechanism of insulin resistance. In order to explore how common genetic variants associated with T2D correlate with body mass index (BMI), we examined the influence of 25 T2D associated loci on obesity risk. We used 5056 individuals (2528 sib-pairs) recruited in Indian Migration Study and conducted within sib-pair analysis for six obesity phenotypes. We found associations of variants in CXCR4 (rs932206) and HHEX (rs5015480) with higher body mass index (BMI) (β=0.13, p=0.001) and (β=0.09, p=0.002), respectively and weight (β=0.13, p=0.001) and (β=0.09, p=0.001), respectively. CXCR4 variant was also strongly associated with body fat (β=0.10, p=0.0004). In addition, we demonstrated associations of CXCR4 and HHEX with overweight/obesity (OR=1.6, p=0.003) and (OR=1.4, p=0.002), respectively, in 1333 sib-pairs (2666 individuals). We observed marginal evidence of associations between variants at six loci (TCF7L2, NGN3, FOXA2, LOC646279, FLJ39370 and THADA) and waist hip ratio (WHR), BMI and/or overweight which needs to be validated in larger set of samples. All the above findings were independent of daily energy consumption and physical activity level. The risk score estimates based on eight significant loci (including nominal associations) showed associations with WHR and body fat which were independent of BMI. In summary, we establish the role of T2D associated loci in influencing the measures of obesity in Indian population, suggesting common underlying pathophysiology across populations.

Association study of 25 type 2 diabetes related Loci with measures of obesity in Indian sib pairs.

Directory of Open Access Journals (Sweden)

Vipin Gupta

Full Text Available Obesity is an established risk factor for type 2 diabetes (T2D and they are metabolically related through the mechanism of insulin resistance. In order to explore how common genetic variants associated with T2D correlate with body mass index (BMI, we examined the influence of 25 T2D associated loci on obesity risk. We used 5056 individuals (2528 sib-pairs recruited in Indian Migration Study and conducted within sib-pair analysis for six obesity phenotypes. We found associations of variants in CXCR4 (rs932206 and HHEX (rs5015480 with higher body mass index (BMI (β=0.13, p=0.001 and (β=0.09, p=0.002, respectively and weight (β=0.13, p=0.001 and (β=0.09, p=0.001, respectively. CXCR4 variant was also strongly associated with body fat (β=0.10, p=0.0004. In addition, we demonstrated associations of CXCR4 and HHEX with overweight/obesity (OR=1.6, p=0.003 and (OR=1.4, p=0.002, respectively, in 1333 sib-pairs (2666 individuals. We observed marginal evidence of associations between variants at six loci (TCF7L2, NGN3, FOXA2, LOC646279, FLJ39370 and THADA and waist hip ratio (WHR, BMI and/or overweight which needs to be validated in larger set of samples. All the above findings were independent of daily energy consumption and physical activity level. The risk score estimates based on eight significant loci (including nominal associations showed associations with WHR and body fat which were independent of BMI. In summary, we establish the role of T2D associated loci in influencing the measures of obesity in Indian population, suggesting common underlying pathophysiology across populations.

Direct Self-Injurious Behavior (D-SIB and Life Events among Vocational School and High School Students

Directory of Open Access Journals (Sweden)

Lili O. Horváth

2018-05-01

Full Text Available Although several studies have recently assessed direct self-injurious behavior (D-SIB among adolescents, it is still understudied in adolescents attending vocational schools: an educational setting generally associated with lower socioeconomic status. After extending the “Saving and Empowering Young Lives in Europe” (SEYLE project to a vocational school population, we examined their D-SIB and life event characteristics compared to the high school population. SEYLE’s Hungarian randomly selected high school sample (N = 995 was completed with a randomly selected vocational school sample (N = 140 in Budapest, Hungary. Participants aged 14–17 years completed the SEYLE project’s self-administered questionnaires. D-SIB lifetime prevalence was significantly higher (29.4% in the vocational school group compared to the high school group (17.2% (Χ2(1 = 12.231, p< 0.001. D-SIB was associated with suicidal ideation in the vocational school group. Different life events were more frequent in the high school than in the vocational school group, and associations between D-SIB and life events differed in the vocational school group compared to the high school group. In conclusion, vocational school students are a vulnerable population with a higher prevalence of D-SIB compared to high school students. Life events and their association with D-SIB also differ in vocational school students compared to high school students. Taking all these into account might contribute to prevention/intervention designed for this population.

Radioactive waste management. International projects on biosphere modelling

International Nuclear Information System (INIS)

Carboneras, P.; Cancio, D.

1993-01-01

The paper presents a general overview and discussion on the state of art concerning the biospheric transfer and accumulation of contaminants. A special emphasis is given to the progress achieved in the field of radioactive contaminants and particularly to those implied in radioactive waste disposal. The objectives and advances of the international projects BIOMOVS and VAMP on validation of model predictions are also described. (Author)

Application of biosphere models in the Biomosa project: a comparative assessment of five European radioactive waste disposal sites

International Nuclear Information System (INIS)

Kowe, R.; Mobbs, S.; Proehl, G.; Bergstrom, U.; Kanyar, B.; Olyslaegers, G.; Zeevaert, T.; Simon, I.

2004-01-01

The BIOMOSA (Biosphere Models for Safety Assessment of Radioactive Waste Disposal) project is a part of the EC fifth framework research programme. The main goal of this project is the improvement of the scientific basis for the application of biosphere models in the framework of long-term safety studies of radioactive waste disposal facilities. Furthermore, the outcome of the project will provide operators and regulatory bodies with guidelines for performance assessments of repository systems. The study focuses on the development and application of site-specific models and a generic biosphere tool BIOGEM (Biosphere Generic Model), using the experience from the national programmes and the IAEA BIOMASS reference biosphere methodology. The models were applied to 5 typical locations in the EU, resulting in estimates of the annual individual doses to the critical groups and the ranking of the importance of the pathways for each of the sites. The results of the site-specific and generic models were then compared. In all cases the doses calculated by the generic model were less than the doses obtained from the site-specific models. Uncertainty in the results was estimated by means of stochastic calculations which allow a comparison of the overall model uncertainty with the variability across the different sites considered. (author)

Post-closure performance assessment treatment of the biosphere

Energy Technology Data Exchange (ETDEWEB)

Broderick, M A [UK Nirex Ltd., Harwell, Oxfordshire (United Kingdom); Egan, M J [AEA Technology, Risley, Cheshire (United Kingdom); Thorne, M C [Electrowatt, Horsham, Sussex (United Kingdom); Williams, J A [AEA Technology, Risley, Cheshire (United Kingdom)

1996-07-01

The Nirex strategy for radioactive waste disposal is based on a system of engineered and natural barriers, providing long-term isolation of the waste from those parts of the environment that are in contact with or readily available for use by humans (i.e. the biosphere). Even so, there remains the possibility that, on a timescale of thousands to tens of thousands of years, small quantities of poorly-sorbed, long-lived radionuclides may be released from the engineered disposal system, ultimately to emerge into the biosphere. Biosphere models are used in post-closure performance assessments to quantify the competing effects of dilution and accumulation processes on radionuclide concentrations in the accessible environment. Understanding biosphere processes and their time dependence is necessary not only to determine the radiological impact of possible future releases, but also to characterise the dynamics of transport in groundwater and the location, duration and extent of any such releases. Nirex is developing a new biosphere model for use in post-closure radiological assessments for the proposed Sellafield repository. A compartment modelling approach has been adopted, as in studies performed previously, but the system will be dynamic, allowing changes with time in both the properties of compartments and the transfers between compartments. The transport model considers both mass transport within the biosphere and the migration of radionuclides, thereby ensuring that a self-consistent description of the biosphere, in a spatially-extensive domain is maintained. The above approach is designed to link the assessment models used by the Nirex assessment team more closely into the Nirex biosphere research programme than has hitherto been possible with time-invariant assessment models. (author)

Post-closure performance assessment treatment of the biosphere

International Nuclear Information System (INIS)

Broderick, M.A.; Egan, M.J.; Thorne, M.C.; Williams, J.A.

1996-01-01

The Nirex strategy for radioactive waste disposal is based on a system of engineered and natural barriers, providing long-term isolation of the waste from those parts of the environment that are in contact with or readily available for use by humans (i.e. the biosphere). Even so, there remains the possibility that, on a timescale of thousands to tens of thousands of years, small quantities of poorly-sorbed, long-lived radionuclides may be released from the engineered disposal system, ultimately to emerge into the biosphere. Biosphere models are used in post-closure performance assessments to quantify the competing effects of dilution and accumulation processes on radionuclide concentrations in the accessible environment. Understanding biosphere processes and their time dependence is necessary not only to determine the radiological impact of possible future releases, but also to characterise the dynamics of transport in groundwater and the location, duration and extent of any such releases. Nirex is developing a new biosphere model for use in post-closure radiological assessments for the proposed Sellafield repository. A compartment modelling approach has been adopted, as in studies performed previously, but the system will be dynamic, allowing changes with time in both the properties of compartments and the transfers between compartments. The transport model considers both mass transport within the biosphere and the migration of radionuclides, thereby ensuring that a self-consistent description of the biosphere, in a spatially-extensive domain is maintained. The above approach is designed to link the assessment models used by the Nirex assessment team more closely into the Nirex biosphere research programme than has hitherto been possible with time-invariant assessment models. (author)

Modeling the impact of climate change in Germany with biosphere models for long-term safety assessment of nuclear waste repositories.

Science.gov (United States)

Staudt, C; Semiochkina, N; Kaiser, J C; Pröhl, G

2013-01-01

Biosphere models are used to evaluate the exposure of populations to radionuclides from a deep geological repository. Since the time frame for assessments of long-time disposal safety is 1 million years, potential future climate changes need to be accounted for. Potential future climate conditions were defined for northern Germany according to model results from the BIOCLIM project. Nine present day reference climate regions were defined to cover those future climate conditions. A biosphere model was developed according to the BIOMASS methodology of the IAEA and model parameters were adjusted to the conditions at the reference climate regions. The model includes exposure pathways common to those reference climate regions in a stylized biosphere and relevant to the exposure of a hypothetical self-sustaining population at the site of potential radionuclide contamination from a deep geological repository. The end points of the model are Biosphere Dose Conversion factors (BDCF) for a range of radionuclides and scenarios normalized for a constant radionuclide concentration in near-surface groundwater. Model results suggest an increased exposure of in dry climate regions with a high impact of drinking water consumption rates and the amount of irrigation water used for agriculture. Copyright © 2012 Elsevier Ltd. All rights reserved.

Testing of environmental transfer models using data from the atmospheric release of Iodine-131 from the Hanford site, USA, in 1963. Report of the Dose Reconstruction Working Group of the Biosphere Modelling and Assessment (BIOMASS) Programme, Theme 2

International Nuclear Information System (INIS)

2003-03-01

The IAEA Programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in Vienna in October 1996. The programme was concerned with developing and improving capabilities to predict the transfer of radionuclides in the environment. The programme had three themes: Theme 1: Radioactive Waste Disposal. The objective was to develop the concept of a standard or reference biosphere for application to the assessment of the long term safety of repositories for radioactive waste. Theme 2: Environmental Releases. BIOMASS provided an international forum for activities aimed at increasing the confidence in methods and models for the assessment of radiation exposure related to environmental releases. Two Working Groups addressed issues concerned with the reconstruction of radiation doses received by people from past releases of radionuclides to the environment and the evaluation of the efficacy of remedial measures. Theme 3: Biosphere Processes. The aim of this Theme was to improve capabilities for modelling the transfer of radionuclides in particular parts of the biosphere identified as being of potential radiological significance and where there were gaps in modelling approaches. This topic was explored using a range of methods including reviews of the literature, model inter-comparison exercises and, where possible, model testing against independent sources of data. Three Working Groups were established to examine the modelling of: (1) long term tritium dispersion in the environment; (2) radionuclide uptake by fruits; and (3) radionuclide migration and accumulation in forest ecosystems. This report describes results of the studies undertaken by the Dose Reconstruction Working Group under Theme 2

Terrestrial biosphere models underestimate photosynthetic capacity and CO2 assimilation in the Arctic.

Science.gov (United States)

Rogers, Alistair; Serbin, Shawn P; Ely, Kim S; Sloan, Victoria L; Wullschleger, Stan D

2017-12-01

Terrestrial biosphere models (TBMs) are highly sensitive to model representation of photosynthesis, in particular the parameters maximum carboxylation rate and maximum electron transport rate at 25°C (V c,max.25 and J max.25 , respectively). Many TBMs do not include representation of Arctic plants, and those that do rely on understanding and parameterization from temperate species. We measured photosynthetic CO 2 response curves and leaf nitrogen (N) content in species representing the dominant vascular plant functional types found on the coastal tundra near Barrow, Alaska. The activation energies associated with the temperature response functions of V c,max and J max were 17% lower than commonly used values. When scaled to 25°C, V c,max.25 and J max.25 were two- to five-fold higher than the values used to parameterize current TBMs. This high photosynthetic capacity was attributable to a high leaf N content and the high fraction of N invested in Rubisco. Leaf-level modeling demonstrated that current parameterization of TBMs resulted in a two-fold underestimation of the capacity for leaf-level CO 2 assimilation in Arctic vegetation. This study highlights the poor representation of Arctic photosynthesis in TBMs, and provides the critical data necessary to improve our ability to project the response of the Arctic to global environmental change. No claim to original US Government works. New Phytologist © 2017 New Phytologist Trust.

Biomedical program at Space Biospheres Ventures

Science.gov (United States)

Walford, Roy

1990-01-01

There are many similarities and some important differences between potential health problems of Biosphere 2 and those of which might be anticipated for a space station or a major outpost on Mars. The demands of time, expense, and equipment would not readily allow medical evacuation from deep space for a serious illness or major trauma, whereas personnel can easily be evacuated from Biosphere 2 if necessary. Treatment facilities can be somewhat less inclusive, since distance would not compel the undertaking of heroic measures or highly complicated surgical procedures on site, and with personnel not fully trained for these procedures. The similarities are given between medical requirements of Biosphere 2 and the complex closed ecological systems of biospheres in space or on Mars. The major problems common to all these would seem to be trauma, infection, and toxicity. It is planned that minor and moderate degrees of trauma, including debridement and suturing of wounds, x ray study of fractures, will be done within Biosphere 2. Bacteriologic and fungal infections, and possibly allergies to pollen or spores are expected to be the commonest medical problem within Biosphere 2.

Sib-recruitment for studying migration and its impact on obesity and diabetes

Directory of Open Access Journals (Sweden)

Prabhakaran Dorairaj

2006-03-01

Full Text Available Abstract Background Urban-rural comparisons are of limited relevance in examining the effects of urban migration in developing countries where urbanisation is due to growth of existing urban populations, expansion of urban boundaries, and rural in-migration. Cultural, genetic and life-style backgrounds of migrants and host populations further limit the value of rural-urban comparisons. Therefore we evaluated a sib-comparison design intended to overcome the limitations of urban-rural comparisons. Methods Using the framework of a current cardiovascular risk factor screening study conducted in Indian factories, we recruited the non-migrant rural sibs of migrant urban factory workers and the urban sibs of non-migrant factory workers. The response rate, completed interviews and examinations conducted were assessed. Adequacy of generic food frequency questionnaires and WHO quality of life questionnaire were assessed. Results All the urban factory workers and spouses approached agreed to be interviewed. Of the 697 participants interviewed, 293 (42% had at least one rural dwelling sibling. Twenty (22% siblings lived further than 100 km from the study site. An additional 21 urban siblings of non-migrant factory workers were also investigated to test the logistics of this element of the study. Obesity (BMI >25 kg/m2 was more common in rural sibs than urban factory workers (age adjusted prevalence: 21.1% (17.1 to 25.0 vs. 16.1% (11.9, 20.3. Diabetes prevalence (fasting plasma glucose greater than 126 mg/dl was higher than expected (age-adjusted prevalence: 12.5% (22 out of 93 in urban migrants and 4.5% (8 out of 90 in rural non-migrant sibs. Conclusion The sib-comparison design is robust and has been adopted in the main study. It is possible that simple urban-rural study designs under-estimate the true differences in diabetes risk between migrants and non-migrants.

Biosphere 2: A prototype project for a permanent and evolving life system for Mars base

Science.gov (United States)

Nelson, Mark; Allen, John P.; Dempster, William F.

As part of the ground-based preparation for creating long-term life systems needed for space habitation and settlement, Space Biopsheres Ventures (SBV) is undertaking the Biosphere 2 project near Oracle, Arizona. Biosphere 2, currently under construction, is scheduled to commence its operations in 1991 with a two-year closure period with a crew of eight people. Biosphere 2 is a facility which will be essentially materially-closed to exchange with the outside environment. It is open to information and energy flow. Biosphere 2 is designed to achieve a complex life-support system by the integration of seven areas or ``biomes'' - rainforest, savannah, desert, marsh, ocean, intensive agriculture and human habitat. Unique bioregenerative technologies, such as soil bed reactors for air purification, aquatic waste processing systems, real-time analytic systems and complex computer monitoring and control systems are being developed for the Biosphere 2 project. Its operation should afford valuable insight into the functioning of complex life systems necessary for long-term habitation in space. It will serve as an experimental ground-based prototype and testbed for the stable, permanent life systems needed for human exploration of Mars.

Biosphere conceptual model development in the frame of Baita Bihor repository safety project

International Nuclear Information System (INIS)

Paunescu, N.; Margineanu, R.; Ene, D.

2002-01-01

The topic of this paper is the development of the biosphere model in the frame of the preliminary performance assessment of the Romanian National L and ILW repository, Baita-Bihor. The work presents the actual understanding of the radionuclide pathways through the repository adjacent area and their conceptualization, collection of required data, implementation of model and preliminary calculation results. The model takes into consideration a leaching scenario from the near field and the transport of radionuclides by river water. The critical group is a small community of inhabitants relying on the local resources, which constitutes an agriculture community 'small farm system'. On the basis of the defined specifications (biosphere equations and data), application of model and dose rate estimates were performed by the ABRICOT code. (author)

Methane Production and Transport within the Marsh Biome of Biosphere 2

Science.gov (United States)

Molnar, Jennifer; Goodridge, Kelven

1997-01-01

In recent decades, the concentration of methane in the earth's atmosphere increased 1-2% annually. It's rate of increases, combined with methane's effectiveness as a greenhouse gas, has led to an intensive research effort to determine the sources and sinks of the gas in the environment. Biosphere 2 offers a unique opportunity to contribute to the effort because it lacks a major photochemical sink present in the Earth's atmosphere. Researchers can therefore concentrate on biological processes involved in methane cycles. Wetlands are a large source of atmospheric methane, due to anoxic conditions in the sediments and the abundance of organic materials. In order to determine if these conditions in Biosphere 2 also promote methane production, this study looked for the fluxes of methane and methods of transport of the gas from from the water and sediments to the atmosphere in the Marsh Biome. Fluxes of methane from the sediments and waters were measured using static chambers, peepers, and leaf bags. Fluxes and vertical profiles of methane in the sediments show that substantial amounts of methane are being produced in the marsh and are being transported into the Biosphere 2 environment.

Nanocrystallization in amorphous Fe40Ni40(Si+B)19Mo1-2 ribbons

International Nuclear Information System (INIS)

Saiseng, S.; Winotai, P.; Nilpairuch, S.; Limsuwan, P.; Tang, I.M.

2004-01-01

Cut Fe 40 Ni 40 (Si+B) 19 Mo 1-2 ribbons were annealed for 2 h at various temperatures between 350 deg. C and 600 deg. C. XRD and Mossbauer effect spectroscopy (ME) measurements were then performed on all of the ribbons. The magnetic properties of several ribbons were measured using a vibrating sample magnetometer (VSM). A differential thermal analysis scan (over the range 20-800 deg. C) of the as-cast ribbon showed two phase transitions; the first at 454 deg. C and the second at 525 deg. C. Both the XRD and ME spectra of the as cast, the 350 deg. C and 400 deg. C annealed ribbons showed that they were amorphous. The ME spectra of the 450 deg. C, 475 deg. C and 500 deg. C annealed ribbons showed that these ribbons contained α-Fe, α-Fe(Si) and t-Fe 2 B nanocrystallites. For the ribbons annealed above 550 deg. C, crystallites of t-Fe 2 B, t-Fe 3 B, t-Fe 5 SiB 2 and FCC-FeNi appeared, with the α-Fe and α-Fe(Si) crystallites disappearing. The sextets of all of the Fe compounds appeared in the ME spectra of the 525 deg. C annealed ribbon. The VSM measurements supported the picture of a two-stage phase transitions; amorphous phase→a nanocrystalline phase (Fe-containing nanocrystallites in an amorphous matrix) at 454 deg. C and then a second transition, the nanocrystalline phase→a disordered alloy containing Fe-B and Fe-Ni crystallites at 525 deg. C

Effects of (+/-)-4-[[2-(1-methyl-2-pyrrolidinyl)ethyl]thio]phenol hydrochloride (SIB-1553A), a selective ligand for nicotinic acetylcholine receptors, in tests of visual attention and distractibility in rats and monkeys.

Science.gov (United States)

Terry, A V; Risbrough, V B; Buccafusco, J J; Menzaghi, F

2002-04-01

Nicotine, a nonselective ligand for nicotinic acetylcholine receptors (nAChRs), has been shown to improve attention and reduce distractibility in humans. Although the numerous side effects induced by nicotine prevent its use as a therapeutic agent, it is hypothesized that subtype-selective nAChR ligands may offer a potential therapeutic benefit to humans with attention deficits. In this study, we evaluated the attention-enhancing properties of (+/-)-4-[[2-(1-methyl-2-pyrrolidinyl)ethyl]thio]phenol hydrochloride (SIB-1553A), a ligand selective for neuronal nAChRs with predominant activity at the human beta 4 subtype. SIB-1553A was evaluated in a test of attention (i.e., five-choice serial reaction time task or SRTT) and distractibility (i.e., delayed matching to sample task with distractor or DMTS-D) in adult rats and monkeys, respectively. SIB-1553A did not improve SRTT performance in normal rats, but reversed deficits induced by the N-methyl-D-aspartate (NMDA) antagonist dizocilpine. In the DMTS-D, SIB-1553A improved accuracy across several doses at the short delay intervals, which were affected most by distracting stimuli in adult monkeys. Subsequent testing with optimal doses for each monkey was also associated with significant improvements in DMTS-D accuracy at short delays, indicating the reproducibility of the drug effect. In both species, SIB-1553A had no significant effects on latencies for sample or choice selection and was not associated with adverse effects at efficacious doses. Although it remains to be further demonstrated, SIB-1553A may act through combined nicotinic and non-nicotinic mechanisms. Collectively, the present data suggest that in specific conditions SIB-1553A may improve certain aspects of attentional function in young adult rats and nonhuman primates without adverse side effects.

Preliminary Feasibility Study of a Hybrid Solar and Modular Pumped Storage Hydro System at Biosphere 2

Energy Technology Data Exchange (ETDEWEB)

Lansey, Kevin [Univ. of Arizona, Tucson, AZ (United States); Hortsman, Chris [Univ. of Arizona, Tucson, AZ (United States)

2016-10-01

In this study, the preliminary feasibility of a hybrid solar and modular pumped storage system designed for high energy independence at Biosphere 2 is assessed. The system consists of an array of solar PV panels that generate electricity during the day to power both Biosphere 2 and a pump that sends water through a pipe to a tank at a high elevation. When solar power is not available, the water is released back down the pipe towards a tank at a lower elevation, where it passes through a hydraulic water turbine to generate hydroelectricity to power Biosphere 2. The hybrid system is sized to generate and store enough energy to enable Biosphere 2 to operate without a grid interconnection on an average day.

Integrating Biodiversity into Biosphere-Atmosphere Interactions Using Individual-Based Models (IBM)

Science.gov (United States)

Wang, B.; Shugart, H. H., Jr.; Lerdau, M.

2017-12-01

A key component regulating complex, nonlinear, and dynamic biosphere-atmosphere interactions is the inherent diversity of biological systems. The model frameworks currently widely used, i.e., Plant Functional Type models) do not even begin to capture the metabolic and taxonomic diversity found in many terrestrial systems. We propose that a transition from PFT-based to individual-based modeling approaches (hereafter referred to as IBM) is essential for integrating biodiversity into research on biosphere-atmosphere interactions. The proposal emerges from our studying the interactions of forests with atmospheric processes in the context of climate change using an individual-based forest volatile organic compounds model, UVAFME-VOC. This individual-based model can explicitly simulate VOC emissions based on an explicit modelling of forest dynamics by computing the growth, death, and regeneration of each individual tree of different species and their competition for light, moisture, and nutrient, from which system-level VOC emissions are simulated by explicitly computing and summing up each individual's emissions. We found that elevated O3 significantly altered the forest dynamics by favoring species that are O3-resistant, which, meanwhile, are producers of isoprene. Such compositional changes, on the one hand, resulted in unsuppressed forest productivity and carbon stock because of the compensation by O3-resistant species. On the other hand, with more isoprene produced arising from increased producers, a possible positive feedback loop between tropospheric O3 and forest thereby emerged. We also found that climate warming will not always stimulate isoprene emissions because warming simultaneously reduces isoprene emissions by causing a decline in the abundance of isoprene-emitting species. These results suggest that species diversity is of great significance and that individual-based modelling strategies should be applied in studying biosphere-atmosphere interactions.

Safety case for the disposal of spent nuclear fuel at Olkiluoto. Surface and near-surface hydrological modelling in the biosphere assessment BSA-2012

International Nuclear Information System (INIS)

Karvonen, T.

2013-05-01

The Finnish nuclear waste disposal company, Posiva Oy, is planning an underground repository for spent nuclear fuel to be constructed on the island of Olkiluoto on the south-west coast of Finland. This study is part of the biosphere assessment (BSA-2012) within the safety case for the repository. The surface hydrological modelling described in this report is aimed at providing link between radionuclide transport in the geosphere and in the biosphere systems. The SVAT-model and Olkiluoto site scale surface hydrological model were calibrated and validated in the present day conditions using the input data provided by the Olkiluoto Monitoring Programme (OMO). During the next 10 000 years the terrain and ecosystem development is to a large extent driven by the postglacial crustal uplift. UNTAMO is a GIS toolbox developed for simulating land-uplift driven or other changes in the biosphere. All the spatial and temporal input data (excluding meteorological data) needed in the surface hydrological modelling were provided by the UNTAMO toolbox. The specific outputs given by UNTAMO toolbox are time-dependent evolution of the biosphere objects. They are continuous and sufficiently homogeneous sub-areas of the modelled area that could potentially receive radionuclides released from the repository. Possible ecosystem types for biosphere objects are coast, lake, river, forest, cropland, pasture and wetland. The primary goal of this study was to compute vertical and horizontal water fluxes in the biosphere objects. These data will be used in the biosphere radionuclide transport calculations. The method adopted here is based on calculating average vertical and horizontal fluxes for biosphere objects from the results of the full 3D-model. It was not necessary to develop any simplified hydrological model for the biosphere objects. This report includes modelling results from for the Reference Case (present day climate) and Terr M axAgri Case (maximum extent of agricultural areas and

Regionally strong feedbacks between the atmosphere and terrestrial biosphere

Science.gov (United States)

Green, Julia K.; Konings, Alexandra G.; Alemohammad, Seyed Hamed; Berry, Joseph; Entekhabi, Dara; Kolassa, Jana; Lee, Jung-Eun; Gentine, Pierre

2017-06-01

The terrestrial biosphere and atmosphere interact through a series of feedback loops. Variability in terrestrial vegetation growth and phenology can modulate fluxes of water and energy to the atmosphere, and thus affect the climatic conditions that in turn regulate vegetation dynamics. Here we analyse satellite observations of solar-induced fluorescence, precipitation, and radiation using a multivariate statistical technique. We find that biosphere-atmosphere feedbacks are globally widespread and regionally strong: they explain up to 30% of precipitation and surface radiation variance in regions where feedbacks occur. Substantial biosphere-precipitation feedbacks are often found in regions that are transitional between energy and water limitation, such as semi-arid or monsoonal regions. Substantial biosphere-radiation feedbacks are often present in several moderately wet regions and in the Mediterranean, where precipitation and radiation increase vegetation growth. Enhancement of latent and sensible heat transfer from vegetation accompanies this growth, which increases boundary layer height and convection, affecting cloudiness, and consequently incident surface radiation. Enhanced evapotranspiration can increase moist convection, leading to increased precipitation. Earth system models underestimate these precipitation and radiation feedbacks mainly because they underestimate the biosphere response to radiation and water availability. We conclude that biosphere-atmosphere feedbacks cluster in specific climatic regions that help determine the net CO2 balance of the biosphere.

Synthesis and preliminary biodistribution studies of [131I]SIB-PEG4-CHC in tumor-bearing mice

International Nuclear Information System (INIS)

Xiaobei Zheng; Jing Yang; Xiaojiang Duan; Tingting Niu; Wangsuo Wu; Jianjun Wang; Feng Dong

2011-01-01

This work reports the synthesis and preliminary biodistribution results of [ 131 I]SIB-PEG 4 -CHC in tumor-bearing mice. The tributylstannyl precursor ATE-PEG 4 -CHC was synthesized by conjugation of ATE to amino pegylated colchicine NH 2 -PEG 4 -CHC. [ 131 I]SIB-PEG 4 -CHC was radiosynthesized by electrophilic destannylation of the precursor with a yield of ∼44%. The radiochemical purity (RCP) appeared to be >95% by a Sep-Pak cartridge purification. [ 131 I]SIB-PEG 4 -CHC was lipophilic and was stable at room temperature. Biodistribution studies in tumor-bearing mice showed that [ 131 I]SIB-PEG 4 -CHC cleared from background rapidly, and didn't deiodinate in vivo. However, the poor tumor localization excluded it from further investigations as a tumor-targeted radiopharmaceuticals. (author)

Biosphere modelling for dose assessments of radioactive waste repositories. Final report

International Nuclear Information System (INIS)

Klos, R.

1996-09-01

The aims of the Complementary Studies Working Group were: to investigate and explain differences which exist between contemporary models with respect to how, for a given test case, they represent the modelled Features, Events and Processes (FEPs) and how the nature of these representations affects the calculational end-points; to determine the most appropriate ways of representing key FEPs; to identify where knowledge needs to be improved to give better representations of these key FEPs in the future and where simplifications of existing formulations might be possible; to show that the modelling undertaken is suitable for purpose, in that it is robust and that it is unlikely that the radiological consequences calculated by the models would be underestimated (so that any conservative bias in the models is justified); to build confidence in the available modelling tools; to extend the work undertaken in the first phase of BIOMOVS to include consideration of radiological dose. Ten modelling groups from Western Europe and Canada have participated, revealing a variety of representations of radionuclide transport processes and techniques for calculating dose. The exercise has focused on the ways in which key FEPs are represented with the intention of determining the robustness or otherwise of existing representations. This has been achieved by applying a well defined dataset representative of a Central European inland valley. Human habits and lifestyle are chosen to be representative of a subsistence agricultural community. Climatic conditions are those of the present day. Many of the conclusions have relevance beyond the immediate concerns of the Central European biospheres and, although care should be exercised when terms of reference differ greatly from the system detailed here, much has been learned which has wider applicability. The exercise has successfully compared not only the behaviour of biosphere models for waste disposal assessments, but has also provided the

Biosphere modelling for dose assessments of radioactive waste repositories. Final report

Energy Technology Data Exchange (ETDEWEB)

Klos, R. [Paul Scherrer Inst., Wuerenlingen (Switzerland)] [and others

1996-09-01

The aims of the Complementary Studies Working Group were: to investigate and explain differences which exist between contemporary models with respect to how, for a given test case, they represent the modelled Features, Events and Processes (FEPs) and how the nature of these representations affects the calculational end-points; to determine the most appropriate ways of representing key FEPs; to identify where knowledge needs to be improved to give better representations of these key FEPs in the future and where simplifications of existing formulations might be possible; to show that the modelling undertaken is suitable for purpose, in that it is robust and that it is unlikely that the radiological consequences calculated by the models would be underestimated (so that any conservative bias in the models is justified); to build confidence in the available modelling tools; to extend the work undertaken in the first phase of BIOMOVS to include consideration of radiological dose. Ten modelling groups from Western Europe and Canada have participated, revealing a variety of representations of radionuclide transport processes and techniques for calculating dose. The exercise has focused on the ways in which key FEPs are represented with the intention of determining the robustness or otherwise of existing representations. This has been achieved by applying a well defined dataset representative of a Central European inland valley. Human habits and lifestyle are chosen to be representative of a subsistence agricultural community. Climatic conditions are those of the present day. Many of the conclusions have relevance beyond the immediate concerns of the Central European biospheres and, although care should be exercised when terms of reference differ greatly from the system detailed here, much has been learned which has wider applicability. The exercise has successfully compared not only the behaviour of biosphere models for waste disposal assessments, but has also provided the

The Biosphere: A Decadal Vision

Science.gov (United States)

Peterson, David L.; Curran, Paul J.; Mlynzcak, Marty; Miller, Richard

2003-01-01

This paper focuses on biosphere-climate interactions including the influences of human activities. Recognizing this is only one aspect of biospheric processes, this places an emphasis of those biogeochemical processes that have a profound effect on numerous other aspects of the biosphere and the services it provides, services which are critical to sustaining life on Earth. And, the paper will focus on the various scientific aspects of assessing the availability of fresh water, including its sensitivity to climate variance and land use changes. Finally, this paper hopes to emphasize the potential role that greatly expanded space observations and interactive modeling can play in developing our understanding of Earth and its the living systems.

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Tappen, J. J.; Wasiolek, M. A.; Wu, D. W.; Schmitt, J. F.; Smith, A. J.

2002-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Jeff Tappen; M.A. Wasiolek; D.W. Wu; J.F. Schmitt

2001-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Positive allosteric modulation of the human metabotropic glutamate receptor 4 (hmGluR4) by SIB-1893 and MPEP

DEFF Research Database (Denmark)

Mathiesen, Jesper Mosolff; Svendsen, Nannette; Bräuner-Osborne, Hans

2003-01-01

We have identified 2-methyl-6-(2-phenylethenyl)pyridine (SIB-1893) and 2-methyl-6-phenylethynyl pyridine hydrochloride (MPEP) as positive allosteric modulators for the hmGluR4. SIB-1893 and MPEP enhanced the potency and efficacy of L-2-amino-4-phophonobutyrate (L-AP4) in guanosine 5'-O-(3-[(35)S...

Biosphere dose conversion Factor Importance and Sensitivity Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This report presents importance and sensitivity analysis for the environmental radiation model for Yucca Mountain, Nevada (ERMYN). ERMYN is a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis concerns the output of the model, biosphere dose conversion factors (BDCFs) for the groundwater, and the volcanic ash exposure scenarios. It identifies important processes and parameters that influence the BDCF values and distributions, enhances understanding of the relative importance of the physical and environmental processes on the outcome of the biosphere model, includes a detailed pathway analysis for key radionuclides, and evaluates the appropriateness of selected parameter values that are not site-specific or have large uncertainty

Reviewing Biosphere Reserves globally: effective conservation action or bureaucratic label?

Science.gov (United States)

Coetzer, Kaera L; Witkowski, Edward T F; Erasmus, Barend F N

2014-02-01

The Biosphere Reserve (BR) model of UNESCO's Man and the Biosphere Programme reflects a shift towards more accountable conservation. Biosphere Reserves attempt to reconcile environmental protection with sustainable development; they explicitly acknowledge humans, and human interests in the conservation landscape while still maintaining the ecological values of existing protected areas. Conceptually, this model is attractive, with 610 sites currently designated globally. Yet the practical reality of implementing dual 'conservation' and 'development' goals is challenging, with few examples successfully conforming to the model's full criteria. Here, we review the history of Biosphere Reserves from first inception in 1974 to the current status quo, and examine the suitability of the designation as an effective conservation model. We track the spatial expansion of Biosphere Reserves globally, assessing the influence of the Statutory Framework of the World Network of Biosphere Reserves and Seville strategy in 1995, when the BR concept refocused its core objectives on sustainable development. We use a comprehensive range of case studies to discuss conformity to the Programme, the social and ecological consequences associated with implementation of the designation, and challenges in aligning conservation and development. Given that the 'Biosphere Reserve' label is a relatively unknown designation in the public arena, this review also provides details on popularising the Biosphere Reserve brand, as well as prospects for further research, currently unexploited, but implicit in the designation. © 2013 The Authors. Biological Reviews © 2013 Cambridge Philosophical Society.

Radiological risk assessment and biosphere modelling for radioactive waste disposal in Switzerland.

Science.gov (United States)

Brennwald, M S; van Dorp, F

2009-12-01

Long-term safety assessments for geological disposal of radioactive waste in Switzerland involve the demonstration that the annual radiation dose to humans due to the potential release of radionuclides from the waste repository into the biosphere will not exceed the regulatory limit of 0.1 mSv. Here, we describe the simple but robust approach used by Nagra (Swiss National Cooperative for the Disposal of Radioactive Waste) to quantify the dose to humans as a result to time-dependent release of radionuclides from the geosphere into the biosphere. The model calculates the concentrations of radionuclides in different terrestrial and aquatic compartments of the surface environment. The fluxes of water and solids within the environment are the drivers for the exchange of radionuclides between these compartments. The calculated radionuclide concentrations in the biosphere are then used to estimate the radiation doses to humans due to various exposure paths (e.g. ingestion of radionuclides via drinking water and food, inhalation of radionuclides, external irradiation from radionuclides in soils). In this paper we also discuss recent new achievements and planned future work.

Posiva biosphere assessment: Revised structure and status 2006

International Nuclear Information System (INIS)

Ikonen, A.

2006-12-01

Posiva's Safety Case is organised into a portfolio consisting of ten main component reports of which the Biosphere Assessment is one. To better facilitate the iterative assessment process by different task groups, the Biosphere Assessment is now organised into a sub-portfolio having folders for reports on specific topics: Site and evolution describes the past, present and future conditions of the surface system of the Olkiluoto site; Biosphere processes contain descriptions of processes prevailing at the site now and in future; Module Descriptions document the radionuclide transport models; Biosphere Assessment Data reports the parameter data used in the assessment with full references to their origin; Cases and variants provide mainly the simulated concentrations in the environmental media as a part of the actual assessment; Exposures of total environment draw conclusions on the dose and effect implications on the basis of the concentrations provided in Cases and variants. Finally, the biosphere assessment is consolidated in the summary report providing the needed high-level information to the main Safety Case and referring to the individual background reports for the details. In addition to the specific folders of the Biosphere Assessment Portfolio, there are also a number of overlapping issues to be considered throughout the assessment. Most important of those are the handling of the geosphere-biosphere interface and the future human activities, and the thorough knowledge quality assessment, the last of which provides tools to evaluate the overall uncertainty and consistency of and confidence to the assessment. In this report, the current strategy of modelling the different aspects of the biosphere from the site investigations to the doses is discussed, and the Biosphere Assessment Portfolio is introduced. Requirements and recommendations are given to the individual folders and/or reports to steer the extensive biosphere modelling and assessment work towards a

BIOPROTA Key Issues in Biosphere Aspects of Assessment of the Long-term Impact of Contaminant Releases Associated with Radioactive Waste Management. Theme 2: Task 7: Modelling Processes in the Geosphere Biosphere Interface Zone

International Nuclear Information System (INIS)

Pinedo, P.; Smith, G.; Aguero, A.; Albrecht, A.; Bath, A.; Benhabderrahmane, H.; Van Dorp, F.; Kautsky, U.; Klos, R.; Laciok, A.; Milodowski, T.; Selroos, J.O.; Simon, I.; Texier, D.; Thorne, M.; Willans, M.

2005-01-01

This document reports on BIOPROTA Theme 2, task 7 which investigated modelling processes in the geosphere- biosphere interface zone (GBIZ) during performance assessments. Modelling issues in the treatment of the GBIZ are identified. A large proportion of the identified issues concern modelling radionuclide behaviour in near surface aquifers which are subject to relatively high gradients in chemical and other conditions. Other key issues concern transfer of radionuclides through the unsaturated zone above aquifers, bearing in mind the scope for erosion and variations in the level of the phreatic surface and also the consideration of environmental change. A number of research areas are highlighted that are aimed at addressing each of the identified issues in the treatment of GBIZ. These include (i) Developing of a current statement of continuing problems, and hence clarify and justify the need to do more; (ii) Conducting a review of site investigations as they have been done already, and determine whether they meet performance assessment requirements; (iii) Identifying scenarios and FEPs considered in current treatments; and, (iv) Conducting source-pathway-receptor analysis to demonstrate comprehensiveness of the overall scenario identification process. The objectives of these activities would be to determine the potential to reduce uncertainties and/or conservative assumptions in assessment of radionuclide transfer from the geosphere to biosphere domains, taking account of environmental change; and to develop guidance on site-characterisation needs at different types of site, as regards the near-surface features. (Author) 23 refs

BIOPROTA Key Issues in Biosphere Aspects of Assessment of the Long-term Impact of Contaminant Releases Associated with Radioactive Waste Management Theme 2: Task 7:Modelling Processes in the Geosphere Biosphere Interface Zone

Energy Technology Data Exchange (ETDEWEB)

Pinedo, P.; Smith, G.; Aguero, A.; Albrecht, A.; Bath, A.; Benhabderrahmane, H.; Van Dorp, F.; Kautsky, U.; Klos, R.; Laciok, A.; Milodowski, T.; Selroos, J.O.; Simon, I.; Texier, D.; Thorne, M.; Willans, M.

2005-07-01

This document reports on BIOPROTA Theme 2, task 7 which investigated modelling processes in the geosphere- biosphere interface zone (GBIZ) during performance assessments. Modelling issues in the treatment of the GBIZ are identified. A large proportion of the identified issues concern modelling radionuclide behaviour in near surface aquifers which are subject to relatively high gradients in chemical and other conditions. Other key issues concern transfer of radionuclides through the unsaturated zone above aquifers, bearing in mind the scope for erosion and variations in the level of the phreatic surface and also the consideration of environmental change. A number of research areas are highlighted that are aimed at addressing each of the identified issues in the treatment of GBIZ. These include (i) Developing of a current statement of continuing problems, and hence clarify and justify the need to do more; (ii) Conducting a review of site investigations as they have been done already, and determine whether they meet performance assessment requirements; (iii) Identifying scenarios and FEPs considered in current treatments; and, (iv) Conducting source-pathway-receptor analysis to demonstrate comprehensiveness of the overall scenario identification process. The objectives of these activities would be to determine the potential to reduce uncertainties and/or conservative assumptions in assessment of radionuclide transfer from the geosphere to biosphere domains, taking account of environmental change; and to develop guidance on site-characterisation needs at different types of site, as regards the near-surface features. (Author) 23 refs.

TRAC-PF1/MOD1 independent assessment: Semiscale Mod-2A intermediate break test S-IB-3

International Nuclear Information System (INIS)

Kmetyk, L.N.

1986-02-01

The TRAC-PF1/MOD1 independent assessment project at Sandia National Laboratories is part of an overall effort funded by the NRC to determine the ability of various system codes to predict the detailed thermal/hydraulic response of light water reactors during accident and off-normal conditions. The TRAC code is being assessed at SNLA against test data from various integral and separate effects test facilities. As part of this assessment matrix, an intermediate break test (S-IB-3), performed at the Semiscale Mod-2A facility, has been analyzed. Using an input model with a 3-D VESSEL component, the vessel and downcomer inventories during 3-IB-3 were generally well predicted, but the core heatup was underpredicted compared to data. An equivalent calculation with an all 1-D input model ran about twice as fast as our basecase analysis using a 3-D VESSEL in the input model, but the results of the two calculations diverged significantly for many parameters of interest, with the 3-D VESSEL model results in better agreement with data. 22 refs., 100 figs

Database description for the biosphere code BIOMOD

International Nuclear Information System (INIS)

Kane, P.; Thorne, M.C.; Coughtrey, P.J.

1983-03-01

The development of a biosphere model for use in comparative radiological assessments of UK low and intermediate level waste repositories is discussed. The nature, content and sources of data contained in the four files that comprise the database for the biosphere code BIOMOD are described. (author)

Biosphere science news roundup. The Center for Biospheric Education and Research

Science.gov (United States)

Cotten, J H

1994-01-01

The Center for Biospheric Education and Research (CBER) is an exciting and truly unique addition to The Huntsville-Madison County Botanical Garden. The mission of CBER is to increase the knowledge and understanding of closed ecological life support systems, including both natural and man-made biospheres. Its primary emphasis will be on the Earth biosphere with particular attention to the role of plants in maintaining a balanced environment. Secondary emphasis will be on the space station and lunar habitation biospheres, both of which employ plants for environmental control, food, and aesthetics. CBER will serve as a catalyst providing both a forum and a facility for research, education, and display of methodologies and technologies relevant to the creation and maintenance of such biospheric systems.

SIB-1553A, (+/-)-4-[[2-(1-methyl-2-pyrrolidinyl)ethyl]thio]phenol hydrochloride, a subtype-selective ligand for nicotinic acetylcholine receptors with putative cognitive-enhancing properties: effects on working and reference memory performances in aged rodents and nonhuman primates.

Science.gov (United States)

Bontempi, B; Whelan, K T; Risbrough, V B; Rao, T S; Buccafusco, J J; Lloyd, G K; Menzaghi, F

2001-10-01

Preclinical and clinical data have suggested the potential use of nicotinic acetylcholine receptor (nAChR) ligands for treating cognitive dysfunction associated with neurodegenerative diseases, such as Alzheimer's disease. SIB-1553A, (+/-)-4-[[2-(1-methyl-2-pyrrolidinyl)ethyl]thio]phenol hydrochloride, a novel nAChR ligand with predominant agonist subtype selectivity for beta4 subunit-containing human neuronal nAChRs, was tested in a variety of cognitive paradigms in aged rodents and nonhuman primates after acute and repeated administration. Subcutaneous administration of SIB-1553A improved delayed nonmatching to place performance in aged mice. In aged rhesus monkeys, intramuscular and oral administration of SIB-1553A improved choice accuracy in a delayed matching to sample task. SIB-1553A improved performances in these spatial and nonspatial working memory tasks but was less effective at improving performances in spatial reference memory tasks (i.e., aged rodents exposed to a discrimination task in a T-maze or trained to locate a hidden platform in a water maze). These data suggest that SIB-1553A has a predominant effect on attention/working memory processes. SIB-1553A also induced the release of acetylcholine in the hippocampus of aged rats and was equally effective whether administered acutely or repeatedly (6 weeks of daily subcutaneous administration). Thus, rats repeatedly treated with SIB-1553A exhibit neither tolerance nor sensitization to the effects of the compound. The SIB-1553A-induced cognitive improvement may be in part related to an increase in cholinergic function. The present study provides additional support for the use of subtype-selective nAChR ligands as a potential therapy for the symptomatic treatment of specific cognitive deficits (such as attention/working memory deficits) associated with aging and neurological diseases.

Transport in biosphere of radionuclides released from finally disposed nuclear waste - background information for transport and dose model

International Nuclear Information System (INIS)

Hulmi, R.; Savolainen, I.

1981-07-01

An outline is made about the biosphere transport and dose models employed in the estimation of doses due to releases from finally disposed nuclear waste. The models often divide into two parts; the first one describes the transport of radionuclides in those parts of biosphere where the time scale is large (e.g. soil, sea and sea sediment), the second part of the model describes the transport of nuclides in the systems where the time scale is small (e.g. food chains, plants and animals). The description of biosphere conditions includes remarkable uncertainty due to the complexity of the biosphere and its ecosystems. Therefore studies of scenario type are recommended: some values of parametres describing the conditions are assumed, and the consequences are estimated by using these values. The effect of uncertainty in various factors on the uncertainty of final results should be investigated with the employment of alternative scenarios and parametric sensitivity studies. In addition to the ordinary results, intermediate results should be presented. A proposal for the structure of a transport and dose program based on dynamic linear compartment model is presented and mathematical solution alternatives are studied also

Biosphere assessment for high-level radioactive waste disposal: modelling experiences and discussion on key parameters by sensitivity analysis in JNC

International Nuclear Information System (INIS)

Kato, Tomoko; Makino, Hitoshi; Uchida, Masahiro; Suzuki, Yuji

2004-01-01

In the safety assessment of the deep geological disposal system of the high-level radioactive waste (HLW), biosphere assessment is often necessary to estimate future radiological impacts on human beings (e.g. radiation dose). In order to estimate the dose, the surface environment (biosphere) into which future releases of radionuclides might occur and the associated future human behaviour needs to be considered. However, for a deep repository, such releases might not occur for many thousands of years after disposal. Over such timescales, it is impossible to predict with any certainty how the biosphere and human behaviour will evolve. To avoid endless speculation aimed at reducing such uncertainty, the 'Reference Biospheres' concept has been developed for use in the safety assessment of HLW disposal. As the aim of the safety assessment with a hypothetical HLW disposal system by JNC was to demonstrate the technical feasibility and reliability of the Japanese disposal concept for a range of geological and surface environments, some biosphere models were developed using the 'Reference Biospheres' concept and the BIOMASS Methodology. These models have been used to derive factors to convert the radionuclide flux from a geosphere to a biosphere into a dose (flux to dose conversion factors). Moreover, sensitivity analysis for parameters in the biosphere models was performed to evaluate and understand the relative importance of parameters. It was concluded that transport parameters in the surface environments, annual amount of food consumption, distribution coefficients on soils and sediments, transfer coefficients of radionuclides to animal products and concentration ratios for marine organisms would have larger influence on the flux to dose conversion factors than any other parameters. (author)

Achondroplasia in sibs of normal parents.

OpenAIRE

Philip, N; Auger, M; Mattei, J F; Giraud, F

1988-01-01

A new case of recurrent achondroplasia in sibs of normal parents is reported. Two sisters and a half sister were affected. Various mechanisms can be postulated to account for unexpected recurrence of achondroplasia in the same sibship. Germinal mosaicism and unstable premutation are discussed here.

Past and Future of the Anthropogenic Biosphere

Science.gov (United States)

Ellis, E. C.

2010-12-01

Human populations and their use of land have now transformed most of the terrestrial biosphere into anthropogenic biomes (anthromes). As anthromes have emerged as the dominant global forms of ecological pattern and process, human interactions with terrestrial ecosystems have become a key earth system process, determining the structure and functioning of the biosphere. This presentation explores Ester Boserup’s land use intensification theories as models for understanding the emergence and dynamics of anthromes and their ecological processes, including their biogeochemistry and community structure, from the mostly wild biosphere of the Holocene to the primarily anthropogenic biosphere of the present and future. Existing global models and data for human population growth and land use over the Holocene differ in their portrayal of the global transition to a mostly anthropogenic biosphere. Yet there is little doubt that human populations have continued to grow over the long term and that anthromes have been increasingly important global ecological systems for millennia. This is conclusive evidence that human interactions with ecosystems can be sustained over the long-term, albeit under conditions that may no longer be realizable by either Earth or human systems. The classic Malthusian paradigm, in which human population growth outstrips natural resources leading to population collapse is unsupported by historical observations at global scale. Boserupian intensification is the better model, providing a robust theoretical foundation in which socio-ecological systems evolve as human populations increase, towards increasingly efficient use of limiting natural resources and enhanced production of anthropogenic ecological services such as food. This is not a story of technical advance, but rather of the forced adoption of ever more energy-intensive technical solutions in support of ever increasing population demands. And it does explain historical changes in the biosphere

The Biosphere.

Science.gov (United States)

Cloud, Preston

1983-01-01

Discusses the earth's biosphere, considering how the microbial, animal and plant life (which make up the biosphere) are sustained by the earth's lithosphere, hydrosphere, and atmosphere. Also considers how these three earth features have powerfully shaped the evolution of these organisms. (JN)

A model of accumulation of radionuclides in biosphere originating from groundwater contamination

International Nuclear Information System (INIS)

Gaerdenaes, Annemieke; Jansson, Per-Erik; Karlberg, Louise

2006-03-01

The objective of this study is to introduce a module in CoupModel describing the transport and accumulation in the biosphere of a radionuclide originating from a ground water contamination. Two model approaches describing the plant uptake of a radionuclide were included, namely passive and active uptake. Passive uptake means in this study that the root uptake rate of a radionuclide is governed by water uptake. Normal mechanism for the passive water uptake is the convective flux of water from the soil to the plant. An example of element taken up passively is Ca. Active plant uptake is in this model defined as the root uptake rate of a radionuclide that is governed by carbon assimilation i.e. photosynthesis and plant growth. The actively taken up element can for example be an element essential to plant, but not available in high enough concentration by passive uptake alone, like the major nutrients N and P or an element that very well resembles a plant nutrient, like Cs resembles K. Active uptake of trace element may occur alone or in addition to passive uptake. Normal mechanism for the active uptake is molecular diffusion from the soil solution to the roots or via any other organism living in symbiosis with the roots like the mycorrhiza. Also a model approach describing adsorption was introduced. CoupModel dynamically couples and simulates the flows of water, heat, carbon and nitrogen in the soil/plant/atmosphere system. Any number of plants may be defined and are divided into roots, leaves, stem and grain. The soil is considered in one vertical profile that may be represented into a maximum of 100 layers. The model is the windows-successor and integrated version of the DOS-models SOIL and SOILN, which have been widely used on different ecosystems and climate regions during 25 years time period. To this soil/plant/atmosphere model were introduced a module describing accumulation of a radionuclide in the biosphere originating from groundwater contamination. The

A model of accumulation of radionuclides in biosphere originating from groundwater contamination

Energy Technology Data Exchange (ETDEWEB)

Gaerdenaes, Annemieke [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Soil Sciences; Jansson, Per-Erik; Karlberg, Louise [Royal Inst. of Technology, Stockholm (Sweden). Dept. Land and Water Resources

2006-03-15

The objective of this study is to introduce a module in CoupModel describing the transport and accumulation in the biosphere of a radionuclide originating from a ground water contamination. Two model approaches describing the plant uptake of a radionuclide were included, namely passive and active uptake. Passive uptake means in this study that the root uptake rate of a radionuclide is governed by water uptake. Normal mechanism for the passive water uptake is the convective flux of water from the soil to the plant. An example of element taken up passively is Ca. Active plant uptake is in this model defined as the root uptake rate of a radionuclide that is governed by carbon assimilation i.e. photosynthesis and plant growth. The actively taken up element can for example be an element essential to plant, but not available in high enough concentration by passive uptake alone, like the major nutrients N and P or an element that very well resembles a plant nutrient, like Cs resembles K. Active uptake of trace element may occur alone or in addition to passive uptake. Normal mechanism for the active uptake is molecular diffusion from the soil solution to the roots or via any other organism living in symbiosis with the roots like the mycorrhiza. Also a model approach describing adsorption was introduced. CoupModel dynamically couples and simulates the flows of water, heat, carbon and nitrogen in the soil/plant/atmosphere system. Any number of plants may be defined and are divided into roots, leaves, stem and grain. The soil is considered in one vertical profile that may be represented into a maximum of 100 layers. The model is the windows-successor and integrated version of the DOS-models SOIL and SOILN, which have been widely used on different ecosystems and climate regions during 25 years time period. To this soil/plant/atmosphere model were introduced a module describing accumulation of a radionuclide in the biosphere originating from groundwater contamination. The

Two sibs who are double heterozygotes for achondroplasia and pseudoachondroplastic dysplasia.

Science.gov (United States)

Woods, C G; Rogers, J G; Mayne, V

1994-01-01

We report a family in which two sibs have both achondroplasia and pseudoachondroplastic dysplasia. The mother has achondroplasia and the father has pseudoachondroplastic dysplasia, which he had inherited from his father. Both children appeared typical of achondroplasia at birth. By 1 1/2 years they had developed a fixed lumbar kyphosis with gibbus and had additional x ray changes unusual for just achondroplasia and suggestive of pseudoachondroplastic dysplasia. Subsequently both children have shown characteristic features of both conditions and have grown less well than expected for achondroplasia. Radiographs show the striking synergistic effects of the two conditions. MRI in both sibs confirmed brain stem compression at the foramen magnum. This may be an important complication and should be actively sought in any double heterozygote. Images PMID:7966194

Supporting NEESPI with Data Services - The SIB-ESS-C e-Infrastructure

Science.gov (United States)

Gerlach, R.; Schmullius, C.; Frotscher, K.

2009-04-01

Data discovery and retrieval is commonly among the first steps performed for any Earth science study. The way scientific data is searched and accessed has changed significantly over the past two decades. Especially the development of the World Wide Web and the technologies that evolved along shortened the data discovery and data exchange process. On the other hand the amount of data collected and distributed by earth scientists has increased exponentially requiring new concepts for data management and sharing. One such concept to meet the demand is to build up Spatial Data Infrastructures (SDI) or e-Infrastructures. These infrastructures usually contain components for data discovery allowing users (or other systems) to query a catalogue or registry and retrieve metadata information on available data holdings and services. Data access is typically granted using FTP/HTTP protocols or, more advanced, through Web Services. A Service Oriented Architecture (SOA) approach based on standardized services enables users to benefit from interoperability among different systems and to integrate distributed services into their application. The Siberian Earth System Science Cluster (SIB-ESS-C) being established at the University of Jena (Germany) is such a spatial data infrastructure following these principles and implementing standards published by the Open Geospatial Consortium (OGC) and the International Organization for Standardization (ISO). The prime objective is to provide researchers with focus on Siberia with the technical means for data discovery, data access, data publication and data analysis. The region of interest covers the entire Asian part of the Russian Federation from the Ural to the Pacific Ocean including the Ob-, Lena- and Yenissey river catchments. The aim of SIB-ESS-C is to provide a comprehensive set of data products for Earth system science in this region. Although SIB-ESS-C will be equipped with processing capabilities for in-house data generation

Achondroplasia in sibs of normal parents.

Science.gov (United States)

Philip, N; Auger, M; Mattei, J F; Giraud, F

1988-01-01

A new case of recurrent achondroplasia in sibs of normal parents is reported. Two sisters and a half sister were affected. Various mechanisms can be postulated to account for unexpected recurrence of achondroplasia in the same sibship. Germinal mosaicism and unstable premutation are discussed here. Images PMID:3236371

Carbon-14 in the biosphere: Modeling and supporting research for the Canadian Nuclear Fuel Waste Management program

International Nuclear Information System (INIS)

Sheppard, S.C.; Amiro, B.D.; Sheppard, M.I.; Stephenson, M.; Zach, R.; Bird, G.A.

1994-01-01

Carbon-14 stands apart from most of the radionuclides present in nuclear fuel waste for several reasons. It has a relatively long radiological half-life and low retardation by granitic geological media so that 14 C is superceded only by 36 Cl and 129 I in potential release to the biosphere from unprocessed used fuel. In the biosphere, its importance continues because it is readily incorporated into the carbon compounds of life. Much of the behavior of 14 C in the biosphere can be conceptualized as isotopic exchange, where the 14 C mixes with 12 C from the biosphere. However, because of lack of data, the authors model the behavior of 14 C only partly as isotopic exchange, with most of the calculations relying on compartment transfer models. The authors experimental work has shown that soil-to-plant transfer may be dominated by the soil-atmosphere-plant pathway. Gaseous loss of 14 C from soils and lakes is significant. However, recalcitrant forms may persist in soils and sediments for long time periods. The impact of these forms is expected to be relatively low because their bioavailability is correspondingly low. Future research should be directed to support full modeling of 14 C as a series of isotopic exchange processes

Biospheric feedback effects in a synchronously coupled model of human and Earth systems

Science.gov (United States)

Thornton, P. E.; Calvin, K. V.; Jones, A. D.; Di Vittorio, A. V.; Bond-Lamberty, B. P.; Chini, L. P.; Shi, X.; Mao, J.; Collins, W. D.; Edmonds, J.; Hurtt, G. C.

2017-12-01

Fossil fuel combustion and land-use change are the two largest contributors to industrial-era increases in atmospheric CO2 concentration. Projections of these are thus fundamental inputs for coupled Earth system models (ESMs) used to estimate the physical and biological consequences of future climate system forcing. While historical datasets are available to inform past and current climate analyses, assessments of future climate change have relied on projections of energy and land use from energy economic models, constrained by assumptions about future policy, land-use patterns, and socio-economic development trajectories. In this work we show that the climatic impacts on land ecosystems drives significant feedbacks in energy, agriculture, land-use, and carbon cycle projections for the 21st century. We find that exposure of human appropriated land ecosystem productivity to biospheric change results in reductions of land area used for crops; increases in managed forest area and carbon stocks; decreases in global crop prices; and reduction in fossil fuel emissions for a low-mid range forcing scenario. Land ecosystem response to increased carbon dioxide concentration, increased anthropogenic nitrogen deposition, and changes in temperature and precipitation all play a role. The feedbacks between climate-induced biospheric change and human system forcings to the climate system demonstrated in this work are handled inconsistently, or excluded altogether, in the one-way asynchronous coupling of energy economic models to ESMs used to date.

The Middle Miocene climate as modelled in an atmosphere-ocean-biosphere model

Directory of Open Access Journals (Sweden)

M. Krapp

2011-11-01

Full Text Available We present simulations with a coupled atmosphere-ocean-biosphere model for the Middle Miocene 15 million years ago. The model is insofar more consistent than previous models because it captures the essential interactions between ocean and atmosphere and between atmosphere and vegetation. The Middle Miocene topography, which alters both large-scale ocean and atmospheric circulations, causes a global warming of 0.7 K compared to present day. Higher than present-day CO₂ levels of 480 and 720 ppm cause a global warming of 2.8 and 4.9 K. The associated water vapour feedback enhances the greenhouse effect which leads to a polar amplification of the warming. These results suggest that higher than present-day CO₂ levels are necessary to drive the warm Middle Miocene climate, also because the dynamic vegetation model simulates a denser vegetation which is in line with fossil records. However, we do not find a flatter than present-day equator-to-pole temperature gradient as has been suggested by marine and terrestrial proxies. Instead, a compensation between atmospheric and ocean heat transport counteracts the flattening of the temperature gradient. The acclaimed role of the large-scale ocean circulation in redistributing heat cannot be supported by our results. Including full ocean dynamics, therefore, does not solve the problem of the flat temperature gradient during the Middle Miocene.

Soil-to-Plant Concentration Ratios for Assessing Food Chain Pathways in Biosphere Models

Energy Technology Data Exchange (ETDEWEB)

Napier, Bruce A.; Fellows, Robert J.; Krupka, Kenneth M.

2007-10-01

This report describes work performed for the U.S. Nuclear Regulatory Commission’s project Assessment of Food Chain Pathway Parameters in Biosphere Models, which was established to assess and evaluate a number of key parameters used in the food-chain models used in performance assessments of radioactive waste disposal facilities. Section 2 of this report summarizes characteristics of samples of soils and groundwater from three geographical regions of the United States, the Southeast, Northwest, and Southwest, and analyses performed to characterize their physical and chemical properties. Because the uptake and behavior of radionuclides in plant roots, plant leaves, and animal products depends on the chemistry of the water and soil coming in contact with plants and animals, water and soil samples collected from these regions of the United States were used in experiments at Pacific Northwest National Laboratory to determine radionuclide soil-to-plant concentration ratios. Crops and forage used in the experiments were grown in the soils, and long-lived radionuclides introduced into the groundwater provide the contaminated water used to water the grown plants. The radionuclides evaluated include 99Tc, 238Pu, and 241Am. Plant varieties include alfalfa, corn, onion, and potato. The radionuclide uptake results from this research study show how regional variations in water quality and soil chemistry affect radionuclide uptake. Section 3 summarizes the procedures and results of the uptake experiments, and relates the soil-to-plant uptake factors derived. In Section 4, the results found in this study are compared with similar values found in the biosphere modeling literature; the study’s results are generally in line with current literature, but soil- and plant-specific differences are noticeable. This food-chain pathway data may be used by the NRC staff to assess dose to persons in the reference biosphere (e.g., persons who live and work in an area potentially affected by

Solid phase evolution in the Biosphere 2 hillslope experiment as predicted by modeling of hydrologic and geochemical fluxes

Directory of Open Access Journals (Sweden)

K. Dontsova

2009-12-01

Full Text Available A reactive transport geochemical modeling study was conducted to help predict the mineral transformations occurring over a ten year time-scale that are expected to impact soil hydraulic properties in the Biosphere 2 (B2 synthetic hillslope experiment. The modeling sought to predict the rate and extent of weathering of a granular basalt (selected for hillslope construction as a function of climatic drivers, and to assess the feedback effects of such weathering processes on the hydraulic properties of the hillslope. Flow vectors were imported from HYDRUS into a reactive transport code, CrunchFlow2007, which was then used to model mineral weathering coupled to reactive solute transport. Associated particle size evolution was translated into changes in saturated hydraulic conductivity using Rosetta software. We found that flow characteristics, including velocity and saturation, strongly influenced the predicted extent of incongruent mineral weathering and neo-phase precipitation on the hillslope. Results were also highly sensitive to specific surface areas of the soil media, consistent with surface reaction controls on dissolution. Effects of fluid flow on weathering resulted in significant differences in the prediction of soil particle size distributions, which should feedback to alter hillslope hydraulic conductivities.

Inter-annual variability of the atmospheric carbon dioxide concentrations as simulated with global terrestrial biosphere models and an atmospheric transport model

Energy Technology Data Exchange (ETDEWEB)

Fujita, Daisuke; Saeki, Tazu; Nakazawa, Takakiyo [Tohoku Univ., Sendai (Japan). Center for Atmospheric and Oceanic Studies; Ishizawa, Misa; Maksyutov, Shamil [Inst. for Global Change Research, Yokohama (Japan). Frontier Research System for Global Change; Thornton, Peter E. [National Center for Atmospheric Research, Boulder, CO (United States). Climate and Global Dynamics Div.

2003-04-01

Seasonal and inter-annual variations of atmospheric CO{sub 2} for the period from 1961 to 1997 have been simulated using a global tracer transport model driven by a new version of the Biome BioGeochemical Cycle model (Biome-BGC). Biome-BGC was forced by daily temperature and precipitation from the NCEP reanalysis dataset, and the calculated monthly-averaged CO{sub 2} fluxes were used as input to the global transport model. Results from an inter-comparison with the Carnegie-Ames-Stanford Approach model (CASA) and the Simulation model of Carbon CYCLE in Land Ecosystems (Sim-CYCLE) model are also reported. The phase of the seasonal cycle in the Northern Hemisphere was reproduced generally well by Biome-BGC, although the amplitude was smaller compared to the observations and to the other biosphere models. The CO{sub 2} time series simulated by Biome-BGC were compared to the global CO{sub 2} concentration anomalies from the observations at Mauna Loa and the South Pole. The modeled concentration anomalies matched the phase of the inter-annual variations in the atmospheric CO{sub 2} observations; however, the modeled amplitude was lower than the observed value in several cases. The result suggests that a significant part of the inter-annual variability in the global carbon cycle can be accounted for by the terrestrial biosphere models. Simulations performed with another climate-based model, Sim-CYCLE, produced a larger amplitude of inter-annual variability in atmospheric CO{sub 2}, making the amplitude closer to the observed range, but with a more visible phase mismatch in a number of time periods. This may indicate the need to increase the Biome-BGC model sensitivity to seasonal and inter-annual changes in temperature and precipitation.

Inter-annual variability of the atmospheric carbon dioxide concentrations as simulated with global terrestrial biosphere models and an atmospheric transport model

International Nuclear Information System (INIS)

Fujita, Daisuke; Saeki, Tazu; Nakazawa, Takakiyo; Ishizawa, Misa; Maksyutov, Shamil; Thornton, Peter E.

2003-01-01

Seasonal and inter-annual variations of atmospheric CO 2 for the period from 1961 to 1997 have been simulated using a global tracer transport model driven by a new version of the Biome BioGeochemical Cycle model (Biome-BGC). Biome-BGC was forced by daily temperature and precipitation from the NCEP reanalysis dataset, and the calculated monthly-averaged CO 2 fluxes were used as input to the global transport model. Results from an inter-comparison with the Carnegie-Ames-Stanford Approach model (CASA) and the Simulation model of Carbon CYCLE in Land Ecosystems (Sim-CYCLE) model are also reported. The phase of the seasonal cycle in the Northern Hemisphere was reproduced generally well by Biome-BGC, although the amplitude was smaller compared to the observations and to the other biosphere models. The CO 2 time series simulated by Biome-BGC were compared to the global CO 2 concentration anomalies from the observations at Mauna Loa and the South Pole. The modeled concentration anomalies matched the phase of the inter-annual variations in the atmospheric CO 2 observations; however, the modeled amplitude was lower than the observed value in several cases. The result suggests that a significant part of the inter-annual variability in the global carbon cycle can be accounted for by the terrestrial biosphere models. Simulations performed with another climate-based model, Sim-CYCLE, produced a larger amplitude of inter-annual variability in atmospheric CO 2 , making the amplitude closer to the observed range, but with a more visible phase mismatch in a number of time periods. This may indicate the need to increase the Biome-BGC model sensitivity to seasonal and inter-annual changes in temperature and precipitation

Root structural and functional dynamics in terrestrial biosphere models--evaluation and recommendations.

Science.gov (United States)

Warren, Jeffrey M; Hanson, Paul J; Iversen, Colleen M; Kumar, Jitendra; Walker, Anthony P; Wullschleger, Stan D

2015-01-01

There is wide breadth of root function within ecosystems that should be considered when modeling the terrestrial biosphere. Root structure and function are closely associated with control of plant water and nutrient uptake from the soil, plant carbon (C) assimilation, partitioning and release to the soils, and control of biogeochemical cycles through interactions within the rhizosphere. Root function is extremely dynamic and dependent on internal plant signals, root traits and morphology, and the physical, chemical and biotic soil environment. While plant roots have significant structural and functional plasticity to changing environmental conditions, their dynamics are noticeably absent from the land component of process-based Earth system models used to simulate global biogeochemical cycling. Their dynamic representation in large-scale models should improve model veracity. Here, we describe current root inclusion in models across scales, ranging from mechanistic processes of single roots to parameterized root processes operating at the landscape scale. With this foundation we discuss how existing and future root functional knowledge, new data compilation efforts, and novel modeling platforms can be leveraged to enhance root functionality in large-scale terrestrial biosphere models by improving parameterization within models, and introducing new components such as dynamic root distribution and root functional traits linked to resource extraction. No claim to original US Government works. New Phytologist © 2014 New Phytologist Trust.

Simultaneous integrated boost intensity-modulated radiotherapy (SIB-IMRT) in nasopharyngeal cancer

Energy Technology Data Exchange (ETDEWEB)

Studer, Gabriela [Dept. of Radiation Oncology, Univ. Hospital, Zurich (Switzerland); Peponi, Evangelia; Glanzmann, Christoph; Kunz, Guntram; Renner, Christoph; Tomuschat, Katja

2010-03-15

Purpose: To assess the efficacy and safety of using simultaneous integrated boost intensity-modulated radiotherapy (SIB-IMRT) to treat nasopharyngeal cancer (NPC) in a Caucasian cohort. Outcome was analyzed with respect to dose-volume histogram (DVH) values. Patients and Methods: Between 03/2002 and 01/2008, 39 NPC patients underwent SIB-IMRT (37 Caucasians; 31 males; mean age 53 years [16-78 years]). 41% presented with WHO (World Health Organization) type 1 unfavorable histology, 85% with stage III/IV disease. 19 patients had total gross tumor volume (GTV) 16-70 cm{sup 3} (mean 36 cm{sup 3}), while 16 had GTV > 70 cm{sup 3} (73-217 cm{sup 3}; mean 115 cm{sup 3}). All patients with stage II-IV disease received concomitant cisplatin. The prescribed SIB dose delivered to the planning target volume (PTV) was 70 Gy (2.00 Gy/fraction) in 17, 69.6 Gy (2.11 Gy/fraction) in 19, and 66 Gy (2.20 Gy/fraction) in three patients. Results: 3-year local relapse-free, nodal relapse-free, distant metastases-free, disease-free rates and overall survival were 86%, 89%, 85%, 72%, and 85% (median follow-up 30 months [8-71 months]). Histology was a significant prognostic factor concerning overall survival, with worst prognosis in WHO type 1 compared to type 2/3 (75% vs. 93%; p = 0.03). There was a trend in favor of WHO type 2/3 regarding local control (74% vs. 94%; p = 0.052). The PTV DVHs showed a slight left shift compared to reported series. Three patients developed grade 3 late effects (xerostomia [n=2], dysphagia [n=1], hearing loss [n=1]). Conclusion: In comparison with predominantly Asian NPC IMRT series in the literature, chemo-IMRT in the own Caucasian cohort, characterized by less radioresponsive WHO type 1, was equally effective. Treatment tolerance was excellent. (orig.)

Biosphere Reserve for All: Potentials for Involving Underrepresented Age Groups in the Development of a Biosphere Reserve through Intergenerational Practice.

Science.gov (United States)

Mitrofanenko, Tamara; Snajdr, Julia; Muhar, Andreas; Penker, Marianne; Schauppenlehner-Kloyber, Elisabeth

2018-05-22

Stakeholder participation is of high importance in UNESCO biosphere reserves as model regions for sustainable development; however, certain groups remain underrepresented. The paper proposes Intergenerational Practice (IP) as a means of involving youth and elderly women and explores its options and barriers, using the example of the Salzburger Lungau and Kärntner Nockberge Biosphere Reserve in Austria. Case study analysis is used involving mixed methods. The results reveal obstacles and motivations to participating in biosphere reserve implementation and intergenerational activities for the youth and the elderly women and imply that much potential for IP exists in the biosphere reserve region. The authors propose suitable solutions from the intergenerational field to overcome identified participation obstacles and suggest benefits of incorporating IP as a management tool into biosphere reserve activities. Suggestions for future research include evaluating applications of IP in the context of protected areas, testing of methods used in other contexts, and contribution to theory development.

System Interconnect Bus (SIB) compatible multi crate CAMAC Controller (CC)

International Nuclear Information System (INIS)

Jha, K.; Borkar, S.P.; Ghodgaonkar, M.D.; D'Costa, C.

2001-01-01

This paper describes design of SIB compatible crate controller with PC interface. SIB is a general-purpose parallel 1/O interface bus used for connecting multi crate system with single PC-interface. The crate controller comprises of a dedicated PC-AT add-on SIB interface card and two width CAMAC module designed to work at station 24 and station 25 of CAMAC crate. PC Interface card (SIBINT) is used for communication between PC/AT host computer and CAMAC Crates. The controller module incorporates a set of registers, logic to generate CAMAC data way timing. Transmission protocol used is RS485 standard. This controller is used for multiple CAMAC crates system, interfaced to PC, using a 60 core twisted pair flat ribbon cable. The crate controller is developed for use in process control, general-purpose data acquisition and control system and laboratory automation. Sustained data transfer rate achieved by controller is 115 Kword/sec each word being 32 bits in length. (author)

Tropical rainforest biome of Biosphere 2. Structure, composition and results of the first 2 years of operation

Energy Technology Data Exchange (ETDEWEB)

Leigh, Linda S. [Systems Ecology and Energy Analysis Program, Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL (United States); Burgess, Tony; Marino, Bruno D.V.; Wei, Yong Dan [Biosphere 2 Center, Inc. P.O. Box 689, Oracle, AZ (United States)

1999-06-01

The tropical rainforest biome in the Biosphere 2 mesocosm was managed with rainfall and temperature conditions to simulate a natural rainforest typical of the new world tropics. The establishment of the biome was based on the introduction of excessive numbers of species allowing self-organization of an ecologically unique rainforest. Over 282 species of plants from rainforest areas were planted within the topographically diverse rainforest biome (area of 1900 m{sup 2}, volume of 35,000 m{sup 3}), just before the Biosphere 2 closure in 1991. Approximately 61% of these species survived when counted in 1993, representing a plant species richness reduction to 172 species in 0.19 hectare. Rank order graphs show that a high diversity community resulted not unlike insular rainforests. The plants of the rainforest mesocosm, however, grew under anomalous conditions of soil (amended desert grassland soil), atmospheric composition (CO{sub 2} up to 4500 ppm by volume (ppmv)) and rainwater composition (high salinity and nutrients). Stem growth rates of a dominant canopy tree, Cecropia, were up to four times higher but had reduced diameter at breast height compared to natural counterparts. Human intervention in plant succession was also an important factor in shaping the ecology of the rainforest biome of Biosphere 2

A qualitative reasoning model of algal bloom in the Danube Delta Biosphere Reserve (DDBR)

NARCIS (Netherlands)

Cioaca, E.; Linnebank, F.E.; Bredeweg, B.; Salles, P.

2009-01-01

This paper presents a Qualitative Reasoning model of the algal bloom phenomenon and its effects in the Danube Delta Biosphere Reserve (DDBR) in Romania. Qualitative Reasoning models represent processes and their cause-effect relationships in a flexible and conceptually rich manner and as such can be

A multi-model assessment of terrestrial biosphere model data needs

Science.gov (United States)

Gardella, A.; Cowdery, E.; De Kauwe, M. G.; Desai, A. R.; Duveneck, M.; Fer, I.; Fisher, R.; Knox, R. G.; Kooper, R.; LeBauer, D.; McCabe, T.; Minunno, F.; Raiho, A.; Serbin, S.; Shiklomanov, A. N.; Thomas, A.; Walker, A.; Dietze, M.

2017-12-01

Terrestrial biosphere models provide us with the means to simulate the impacts of climate change and their uncertainties. Going beyond direct observation and experimentation, models synthesize our current understanding of ecosystem processes and can give us insight on data needed to constrain model parameters. In previous work, we leveraged the Predictive Ecosystem Analyzer (PEcAn) to assess the contribution of different parameters to the uncertainty of the Ecosystem Demography model v2 (ED) model outputs across various North American biomes (Dietze et al., JGR-G, 2014). While this analysis identified key research priorities, the extent to which these priorities were model- and/or biome-specific was unclear. Furthermore, because the analysis only studied one model, we were unable to comment on the effect of variability in model structure to overall predictive uncertainty. Here, we expand this analysis to all biomes globally and a wide sample of models that vary in complexity: BioCro, CABLE, CLM, DALEC, ED2, FATES, G'DAY, JULES, LANDIS, LINKAGES, LPJ-GUESS, MAESPA, PRELES, SDGVM, SIPNET, and TEM. Prior to performing uncertainty analyses, model parameter uncertainties were assessed by assimilating all available trait data from the combination of the BETYdb and TRY trait databases, using an updated multivariate version of PEcAn's Hierarchical Bayesian meta-analysis. Next, sensitivity analyses were performed for all models across a range of sites globally to assess sensitivities for a range of different outputs (GPP, ET, SH, Ra, NPP, Rh, NEE, LAI) at multiple time scales from the sub-annual to the decadal. Finally, parameter uncertainties and model sensitivities were combined to evaluate the fractional contribution of each parameter to the predictive uncertainty for a specific variable at a specific site and timescale. Facilitated by PEcAn's automated workflows, this analysis represents the broadest assessment of the sensitivities and uncertainties in terrestrial

Posiva's Strategy for Biosphere Studies

International Nuclear Information System (INIS)

Hautojaervi, Aimo; Vieno, Timo

2002-01-01

Aimo Hautojaervi (Posiva, Finland) explained that Posiva follows the regulation from authorities that will be published soon on the STUK Web site in an English version. As an example, he said that a dose constraint of 0.1 mSv/a must be considered for several thousand years and release rate constraint for the long term. The values for these constraints were given by STUK and Posiva needs to demonstrate compliance. Posiva welcomes the regulator's clear requirements and guidance in the field of biosphere analyses. Moreover, Aimo Hautojaervi presented the planned future work that will be carried out by Posiva. As well as carrying out biosphere modelling for potential recipients at Olkiluoto, Posiva will conduct biosphere analyses for wells, lakes, seas, etc., and further evaluate human actions and develop biosphere models in close cooperation with SKB. Posiva is also actively seeking international cooperation in these new researches fields, for example within IAEA. Two potentially problematic radionuclides were also mentioned: C-14 and Radon plus decay products. These two radionuclides will be studied in depth in the future Posiva research and development programme

Gaian bottlenecks and planetary habitability maintained by evolving model biospheres: the ExoGaia model

Science.gov (United States)

Nicholson, Arwen E.; Wilkinson, David M.; Williams, Hywel T. P.; Lenton, Timothy M.

2018-06-01

The search for habitable exoplanets inspires the question - how do habitable planets form? Planet habitability models traditionally focus on abiotic processes and neglect a biotic response to changing conditions on an inhabited planet. The Gaia hypothesis postulates that life influences the Earth's feedback mechanisms to form a self-regulating system, and hence that life can maintain habitable conditions on its host planet. If life has a strong influence, it will have a role in determining a planet's habitability over time. We present the ExoGaia model - a model of simple `planets' host to evolving microbial biospheres. Microbes interact with their host planet via consumption and excretion of atmospheric chemicals. Model planets orbit a `star' that provides incoming radiation, and atmospheric chemicals have either an albedo or a heat-trapping property. Planetary temperatures can therefore be altered by microbes via their metabolisms. We seed multiple model planets with life while their atmospheres are still forming and find that the microbial biospheres are, under suitable conditions, generally able to prevent the host planets from reaching inhospitable temperatures, as would happen on a lifeless planet. We find that the underlying geochemistry plays a strong role in determining long-term habitability prospects of a planet. We find five distinct classes of model planets, including clear examples of `Gaian bottlenecks' - a phenomenon whereby life either rapidly goes extinct leaving an inhospitable planet or survives indefinitely maintaining planetary habitability. These results suggest that life might play a crucial role in determining the long-term habitability of planets.

Power of non-parametric linkage analysis in mapping genes contributing to human longevity in long-lived sib-pairs

DEFF Research Database (Denmark)

Tan, Qihua; Zhao, J H; Iachine, I

2004-01-01

This report investigates the power issue in applying the non-parametric linkage analysis of affected sib-pairs (ASP) [Kruglyak and Lander, 1995: Am J Hum Genet 57:439-454] to localize genes that contribute to human longevity using long-lived sib-pairs. Data were simulated by introducing a recently...... developed statistical model for measuring marker-longevity associations [Yashin et al., 1999: Am J Hum Genet 65:1178-1193], enabling direct power comparison between linkage and association approaches. The non-parametric linkage (NPL) scores estimated in the region harboring the causal allele are evaluated...... in case of a dominant effect. Although the power issue may depend heavily on the true genetic nature in maintaining survival, our study suggests that results from small-scale sib-pair investigations should be referred with caution, given the complexity of human longevity....

Biosphere modelling for the safety assessment of high-level radioactive waste disposal in the Japanese H12 assessment

International Nuclear Information System (INIS)

Kato, Tomoko; Suzuki, Yuji; Ishiguro, Katsuhiko; Naito, Morimasa; Ishiguro, Katsuhiko; Ikeda, Takao; Little, Richard H.; Smith, Graham M.

2002-01-01

JNC has an on-going programme of research and development relating to the safety assessment of the deep geological disposal system of high-level radioactive waste (HLW). In the safety assessment of a HLW disposal system, it is often necessary to estimate future radiological impacts on human beings (e.g. radiation dose). In order to estimate dose, consideration needs to be given to the surface environment (biosphere) into which future releases of radionuclides might occur and to the associated future human behaviour. However, for a deep repository, such releases might not occur for many thousands of years after disposal. Over such timescales, it is not possible to predict with any certainty how the biosphere and human behaviour will evolve. To avoid endless speculation aimed at reducing such uncertainty, the reference biosphere le concept has been developed for use in the safety assessment of HLW disposal. The Reference Biospheres Methodology was originally developed by the BIOMOVS II Reference Biospheres Working Group and subsequently enhanced within Theme 1 of the BIOMASS programme. As the aim of the H12 assessment with a hypothetical HLW disposal system was to demonstrate the technical feasibility and reliability of the Japanese disposal concept for a range of geological and surface environments, some assessment specific reference biospheres were developed for the biosphere modelling in the H12 assessment using an approach consistent with the BIOMOVS II/BIOMASS approach. They have been used to derive factors to convert the radionuclide flux from a geosphere to a biosphere into a dose. The influx to dose conversion factor also have been derived for a range of different geosphere-biosphere interfaces (well, river and marine) and potential exposure groups (farming, freshwater-fishing and marine-fishing). This paper summarises the approach used for the derivation of the influx to dose conversion factor also for the range of geosphere-biosphere interfaces and

Spanish methodological approach for biosphere assessment of radioactive waste disposal

International Nuclear Information System (INIS)

Agueero, A.; Pinedo, P.; Cancio, D.; Simon, I.; Moraleda, M.; Perez-Sanchez, D.; Trueba, C.

2007-01-01

The development of radioactive waste disposal facilities requires implementation of measures that will afford protection of human health and the environment over a specific temporal frame that depends on the characteristics of the wastes. The repository design is based on a multi-barrier system: (i) the near-field or engineered barrier, (ii) far-field or geological barrier and (iii) the biosphere system. Here, the focus is on the analysis of this last system, the biosphere. A description is provided of conceptual developments, methodological aspects and software tools used to develop the Biosphere Assessment Methodology in the context of high-level waste (HLW) disposal facilities in Spain. This methodology is based on the BIOMASS 'Reference Biospheres Methodology' and provides a logical and systematic approach with supplementary documentation that helps to support the decisions necessary for model development. It follows a five-stage approach, such that a coherent biosphere system description and the corresponding conceptual, mathematical and numerical models can be built. A discussion on the improvements implemented through application of the methodology to case studies in international and national projects is included. Some facets of this methodological approach still require further consideration, principally an enhanced integration of climatology, geography and ecology into models considering evolution of the environment, some aspects of the interface between the geosphere and biosphere, and an accurate quantification of environmental change processes and rates

Spanish methodological approach for biosphere assessment of radioactive waste disposal.

Science.gov (United States)

Agüero, A; Pinedo, P; Cancio, D; Simón, I; Moraleda, M; Pérez-Sánchez, D; Trueba, C

2007-10-01

The development of radioactive waste disposal facilities requires implementation of measures that will afford protection of human health and the environment over a specific temporal frame that depends on the characteristics of the wastes. The repository design is based on a multi-barrier system: (i) the near-field or engineered barrier, (ii) far-field or geological barrier and (iii) the biosphere system. Here, the focus is on the analysis of this last system, the biosphere. A description is provided of conceptual developments, methodological aspects and software tools used to develop the Biosphere Assessment Methodology in the context of high-level waste (HLW) disposal facilities in Spain. This methodology is based on the BIOMASS "Reference Biospheres Methodology" and provides a logical and systematic approach with supplementary documentation that helps to support the decisions necessary for model development. It follows a five-stage approach, such that a coherent biosphere system description and the corresponding conceptual, mathematical and numerical models can be built. A discussion on the improvements implemented through application of the methodology to case studies in international and national projects is included. Some facets of this methodological approach still require further consideration, principally an enhanced integration of climatology, geography and ecology into models considering evolution of the environment, some aspects of the interface between the geosphere and biosphere, and an accurate quantification of environmental change processes and rates.

Application of the Biosphere Assessment Methodology to the ENRESA, 1997 Performance and Safety Assessment

International Nuclear Information System (INIS)

Pinedo, P.; Simon, I.; Aguero, A.

1998-01-01

For several years CIEMAT has been developing for ENRESA knowledge and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water bodies or soils). The model development also includes evaluation of radiological impacts arising from the resulting distribution of radionuclides in the biosphere. In 1996, a Methodology to analyse the biosphere in this context proposed to ENRESA. The level of development of the different aspects proposed within the Methodology was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects like the procedure for conceptual model development and the description of biosphere system representatives of the long term needed further developments. At present, the International Atomic Energy Agency (IAEA) Programme on Biosphere Modelling and Assessment (BIOMASS) in collaboration with several national organizations, ENRESA and CIEMAT among them, is working to complete and augment the Reference Biosphere Methodology and to produce some practical descriptions of Reference Systems. The overall purpose of this document is to apply the Methodology, taking account of on-going developments in biosphere modelling, to the last performance assessment (PA) exercise made by ENRESA (ENRESA, 1997), using from it the general and particular information about the assessment context, radionuclide information, geosphere and geobiosphere interface data. There are three particular objectives to this work: (a) to determine the practicability of the Methodology in an application to a realistic assessment situation, (b) To compare and contrast previous biosphere modelling in HLW PA and, (c) to test software development related with data management and modelling. (Author) 42 refs

Application of alternative models to identify QTL for growth traits in an F2 Duroc x Pietrain pig resource population

Directory of Open Access Journals (Sweden)

Rumph Janice M

2010-11-01

Full Text Available Abstract Background A variety of analysis approaches have been applied to detect quantitative trait loci (QTL in experimental populations. The initial genome scan of our Duroc x Pietrain F2 resource population included 510 F2 animals genotyped with 124 microsatellite markers and analyzed using a line-cross model. For the second scan, 20 additional markers on 9 chromosomes were genotyped for 954 F2 animals and 20 markers used in the first scan were genotyped for 444 additional F2 animals. Three least-squares Mendelian models for QTL analysis were applied for the second scan: a line-cross model, a half-sib model, and a combined line-cross and half-sib model. Results In total, 26 QTL using the line-cross model, 12 QTL using the half-sib model and 3 additional QTL using the combined line-cross and half-sib model were detected for growth traits with a 5% false discovery rate (FDR significance level. In the line-cross analysis, highly significant QTL for fat deposition at 10-, 13-, 16-, 19-, and 22-wk of age were detected on SSC6. In the half-sib analysis, a QTL for loin muscle area at 19-wk of age was detected on SSC7 and QTL for 10th-rib backfat at 19- and 22-wk of age were detected on SSC15. Conclusions Additional markers and animals contributed to reduce the confidence intervals and increase the test statistics for QTL detection. Different models allowed detection of new QTL which indicated differing frequencies for alternative alleles in parental breeds.

Biosphere modeling for safety assessment to high-level radioactive waste geological disposal. Application of reference biosphere methodology to safety assesment of geological disposal

International Nuclear Information System (INIS)

Baba, Tomoko; Ishihara, Yoshinao; Ishiguro, Katsuhiko; Suzuki, Yuji; Naito, Morimasa

2000-01-01

In the safety assessment of a high-level radioactive waste disposal system, it is required to estimate future radiological impacts on human beings. Consideration of living habits and the human environment in the future involves a large degree of uncertainty. To avoid endless speculation aimed at reducing such uncertainty, an approach is applied for identifying and justifying a 'reference biosphere' for use in safety assessment in Japan. considering a wide range of Japanese geological environments, saline specific reference biospheres' were developed using an approach consistent with the BIOMOVS II reference biosphere methodology. (author)

On the uncertainty of phenological responses to climate change, and implications for a terrestrial biosphere model

Directory of Open Access Journals (Sweden)

M. Migliavacca

2012-06-01

Full Text Available Phenology, the timing of recurring life cycle events, controls numerous land surface feedbacks to the climate system through the regulation of exchanges of carbon, water and energy between the biosphere and atmosphere.

Terrestrial biosphere models, however, are known to have systematic errors in the simulation of spring phenology, which potentially could propagate to uncertainty in modeled responses to future climate change. Here, we used the Harvard Forest phenology record to investigate and characterize sources of uncertainty in predicting phenology, and the subsequent impacts on model forecasts of carbon and water cycling. Using a model-data fusion approach, we combined information from 20 yr of phenological observations of 11 North American woody species, with 12 leaf bud-burst models that varied in complexity.

Akaike's Information Criterion indicated support for spring warming models with photoperiod limitations and, to a lesser extent, models that included chilling requirements.

We assessed three different sources of uncertainty in phenological forecasts: parameter uncertainty, model uncertainty, and driver uncertainty. The latter was characterized running the models to 2099 using 2 different IPCC climate scenarios (A1fi vs. B1, i.e. high CO₂ emissions vs. low CO₂ emissions scenario. Parameter uncertainty was the smallest (average 95% Confidence Interval – CI: 2.4 days century⁻¹ for scenario B1 and 4.5 days century⁻¹ for A1fi, whereas driver uncertainty was the largest (up to 8.4 days century⁻¹ in the simulated trends. The uncertainty related to model structure is also large and the predicted bud-burst trends as well as the shape of the smoothed projections varied among models (±7.7 days century⁻¹ for A1fi, ±3.6 days century⁻¹ for B1. The forecast sensitivity of bud-burst to temperature (i.e. days bud-burst advanced per

Challenging terrestrial biosphere models with data from the long-term multifactor Prairie Heating and CO2 Enrichment experiment.

Science.gov (United States)

De Kauwe, Martin G; Medlyn, Belinda E; Walker, Anthony P; Zaehle, Sönke; Asao, Shinichi; Guenet, Bertrand; Harper, Anna B; Hickler, Thomas; Jain, Atul K; Luo, Yiqi; Lu, Xingjie; Luus, Kristina; Parton, William J; Shu, Shijie; Wang, Ying-Ping; Werner, Christian; Xia, Jianyang; Pendall, Elise; Morgan, Jack A; Ryan, Edmund M; Carrillo, Yolima; Dijkstra, Feike A; Zelikova, Tamara J; Norby, Richard J

2017-09-01

Multifactor experiments are often advocated as important for advancing terrestrial biosphere models (TBMs), yet to date, such models have only been tested against single-factor experiments. We applied 10 TBMs to the multifactor Prairie Heating and CO 2 Enrichment (PHACE) experiment in Wyoming, USA. Our goals were to investigate how multifactor experiments can be used to constrain models and to identify a road map for model improvement. We found models performed poorly in ambient conditions; there was a wide spread in simulated above-ground net primary productivity (range: 31-390 g C m -2  yr -1 ). Comparison with data highlighted model failures particularly with respect to carbon allocation, phenology, and the impact of water stress on phenology. Performance against the observations from single-factors treatments was also relatively poor. In addition, similar responses were predicted for different reasons across models: there were large differences among models in sensitivity to water stress and, among the N cycle models, N availability during the experiment. Models were also unable to capture observed treatment effects on phenology: they overestimated the effect of warming on leaf onset and did not allow CO 2 -induced water savings to extend the growing season length. Observed interactive (CO 2  × warming) treatment effects were subtle and contingent on water stress, phenology, and species composition. As the models did not correctly represent these processes under ambient and single-factor conditions, little extra information was gained by comparing model predictions against interactive responses. We outline a series of key areas in which this and future experiments could be used to improve model predictions of grassland responses to global change. © 2017 John Wiley & Sons Ltd.

SibRank: Signed bipartite network analysis for neighbor-based collaborative ranking

Science.gov (United States)

Shams, Bita; Haratizadeh, Saman

2016-09-01

Collaborative ranking is an emerging field of recommender systems that utilizes users' preference data rather than rating values. Unfortunately, neighbor-based collaborative ranking has gained little attention despite its more flexibility and justifiability. This paper proposes a novel framework, called SibRank that seeks to improve the state of the art neighbor-based collaborative ranking methods. SibRank represents users' preferences as a signed bipartite network, and finds similar users, through a novel personalized ranking algorithm in signed networks.

Summary of the IAEA's BIOMASS reference biosphere methodology for Environment Agency staff

International Nuclear Information System (INIS)

Coughtrey, P.

2001-01-01

The International Atomic Energy Agency (IAEA) programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in October 1996, and will complete during 2001. The BIOMASS programme aimed to develop and apply a methodology for defining biospheres for practical radiological assessment of releases from radioactive waste disposal. This report provides a summary description of the BIOMASS methodology. The BIOMASS methodology has been developed through international collaboration and represents a major milestone in biosphere modelling. It provides an approach supported by a wide range of developers, regulators, biosphere experts and safety assessment specialists. The Environment Agency participated actively in the BIOMASS programme

Strategies for implementing genomic selection in family-based aquaculture breeding schemes: double haploid sib test populations

Directory of Open Access Journals (Sweden)

Nirea Kahsay G

2012-10-01

Full Text Available Abstract Background Simulation studies have shown that accuracy and genetic gain are increased in genomic selection schemes compared to traditional aquaculture sib-based schemes. In genomic selection, accuracy of selection can be maximized by increasing the precision of the estimation of SNP effects and by maximizing the relationships between test sibs and candidate sibs. Another means of increasing the accuracy of the estimation of SNP effects is to create individuals in the test population with extreme genotypes. The latter approach was studied here with creation of double haploids and use of non-random mating designs. Methods Six alternative breeding schemes were simulated in which the design of the test population was varied: test sibs inherited maternal (Mat, paternal (Pat or a mixture of maternal and paternal (MatPat double haploid genomes or test sibs were obtained by maximum coancestry mating (MaxC, minimum coancestry mating (MinC, or random (RAND mating. Three thousand test sibs and 3000 candidate sibs were genotyped. The test sibs were recorded for a trait that could not be measured on the candidates and were used to estimate SNP effects. Selection was done by truncation on genome-wide estimated breeding values and 100 individuals were selected as parents each generation, equally divided between both sexes. Results Results showed a 7 to 19% increase in selection accuracy and a 6 to 22% increase in genetic gain in the MatPat scheme compared to the RAND scheme. These increases were greater with lower heritabilities. Among all other scenarios, i.e. Mat, Pat, MaxC, and MinC, no substantial differences in selection accuracy and genetic gain were observed. Conclusions In conclusion, a test population designed with a mixture of paternal and maternal double haploids, i.e. the MatPat scheme, increases substantially the accuracy of selection and genetic gain. This will be particularly interesting for traits that cannot be recorded on the

Assessing filtering of mountaintop CO2 mole fractions for application to inverse models of biosphere-atmosphere carbon exchange

Directory of Open Access Journals (Sweden)

S. L. Heck

2012-02-01

Full Text Available There is a widely recognized need to improve our understanding of biosphere-atmosphere carbon exchanges in areas of complex terrain including the United States Mountain West. CO2 fluxes over mountainous terrain are often difficult to measure due to unusual and complicated influences associated with atmospheric transport. Consequently, deriving regional fluxes in mountain regions with carbon cycle inversion of atmospheric CO2 mole fraction is sensitive to filtering of observations to those that can be represented at the transport model resolution. Using five years of CO2 mole fraction observations from the Regional Atmospheric Continuous CO2 Network in the Rocky Mountains (Rocky RACCOON, five statistical filters are used to investigate a range of approaches for identifying regionally representative CO2 mole fractions. Test results from three filters indicate that subsets based on short-term variance and local CO2 gradients across tower inlet heights retain nine-tenths of the total observations and are able to define representative diel variability and seasonal cycles even for difficult-to-model sites where the influence of local fluxes is much larger than regional mole fraction variations. Test results from two other filters that consider measurements from previous and following days using spline fitting or sliding windows are overly selective. Case study examples showed that these windowing-filters rejected measurements representing synoptic changes in CO2, which suggests that they are not well suited to filtering continental CO2 measurements. We present a novel CO2 lapse rate filter that uses CO2 differences between levels in the model atmosphere to select subsets of site measurements that are representative on model scales. Our new filtering techniques provide guidance for novel approaches to assimilating mountain-top CO2 mole fractions in carbon cycle inverse models.

Short-term carbon partitioning fertilizer responses vary among two full-sib loblolly pine clones

Science.gov (United States)

Jeremy P. Stovall; John R. Seiler; Thomas R. Fox

2012-01-01

We investigated the effects of fertilizer application on the partitioning of gross primary productivity (GPP) between contrasting full-sib clones of Pinus taeda (L.). Our objective was to determine if fertilizer growth responses resulted from similar short-term changes to partitioning. A modeling approach incorporating respiratory carbon (C) fluxes,...

Power of QTL detection by either fixed or random models in half-sib designs

Directory of Open Access Journals (Sweden)

Schaeffer Lawrence R

2005-11-01

Full Text Available Abstract The aim of this study was to compare the variance component approach for QTL linkage mapping in half-sib designs to the simple regression method. Empirical power was determined by Monte Carlo simulation in granddaughter designs. The factors studied (base values in parentheses included the number of sires (5 and sons per sire (80, ratio of QTL variance to total genetic variance (λ = 0.1, marker spacing (10 cM, and QTL allele frequency (0.5. A single bi-allelic QTL and six equally spaced markers with six alleles each were simulated. Empirical power using the regression method was 0.80, 0.92 and 0.98 for 5, 10, and 20 sires, respectively, versus 0.88, 0.98 and 0.99 using the variance component method. Power was 0.74, 0.80, 0.93, and 0.95 using regression versus 0.77, 0.88, 0.94, and 0.97 using the variance component method for QTL variance ratios (λ of 0.05, 0.1, 0.2, and 0.3, respectively. Power was 0.79, 0.85, 0.80 and 0.87 using regression versus 0.80, 0.86, 0.88, and 0.85 using the variance component method for QTL allele frequencies of 0.1, 0.3, 0.5, and 0.8, respectively. The log10 of type I error profiles were quite flat at close marker spacing (1 cM, confirming the inability to fine-map QTL by linkage analysis in half-sib designs. The variance component method showed slightly more potential than the regression method in QTL mapping.

Progeny-testing of full-sibs IBD in a SSC2 QTL region highlights epistatic interactions for fatness traits in pigs

Directory of Open Access Journals (Sweden)

Iannuccelli Nathalie

2011-10-01

Full Text Available Abstract Background Many QTL have been detected in pigs, but very few of them have been fine-mapped up to the causal mutation. On SSC2, the IGF2-intron3-G3072A mutation has been described as the causative polymorphism for a QTL underlying muscle mass and backfat deposition, but further studies have demonstrated that at least one additional QTL should segregate downstream of this mutation. A marker-assisted backcrossing design was set up in order to confirm the segregation of this second locus, reduce its confidence interval and better understand its mode of segregation. Results Five recombinant full-sibs, with genotype G/G at the IGF2 mutation, were progeny-tested. Only two of them displayed significant QTL for fatness traits although four inherited the same paternal and maternal chromosomes, thus exhibiting the same haplotypic contrast in the QTL region. The hypothesis of an interaction with another region in the genome was proposed to explain these discrepancies and after a genome scan, four different regions were retained as potential interacting regions with the SSC2 QTL. A candidate interacting region on SSC13 was confirmed by the analysis of an F2 pedigree, and in the backcross pedigree one haplotype in this region was found to mask the SSC2 QTL effect. Conclusions Assuming the hypothesis of interactions with other chromosomal regions, the QTL could be unambiguously mapped to a 30 cM region delimited by recombination points. The marker-assisted backcrossing design was successfully used to confirm the segregation of a QTL on SSC2 and, because full-sibs that inherited the same alleles from their two parents were analysed, the detection of epistatic interactions could be performed between alleles and not between breeds as usually done with the traditional Line-Cross model. Additional analyses of other recombinant sires should provide more information to further improve the fine-mapping of this locus, and confirm or deny the interaction

Site and Regional Data for Biosphere Assessment BSA-2009 Supplement to Olkiluoto Biosphere Description 2009

International Nuclear Information System (INIS)

Aro, L.; Haapanen, R.; Puhakka, L.; Hjerpe, T.; Kirkkala, T.; Koivunen, S.; Lahdenperae, A.-M.; Salo, T.; Ikonen, A.T.K.; Helin, J.

2010-06-01

The safety case for a spent nuclear fuel repository at Olkiluoto includes a computational safety assessment. A site-specific biosphere assessment is an integral part of them both. In 2009 an assessment was conducted to demonstrate preparedness to apply for construction license to the repository in 2012. As a part of the biosphere assessment, the present conditions at the site are described in Olkiluoto biosphere description report for an analogue of the future conditions being simulated in the safety assessment. This report is a supplement to the biosphere description report of 2009 and documents the site and regional data used in the biosphere assessment 'BSA-2009' with respective rationales. (orig.)

User's guide to the biosphere code ECOS

International Nuclear Information System (INIS)

Kane, P.; Thorne, M.C.

1984-10-01

This report constitutes the user's guide to the biosphere model ECOS and provides a detailed description of the processes modelled and mathematical formulations used. The FORTRAN code ECOS is an equilibrium-type compartmental biosphere code. ECOS was designed with the objective of producing a general but comprehensive code for use in the assessment of the radiological impact of unspecified geological repositories for radioactive waste. ECOS transforms the rate of release of activity from the geosphere to the rate of accumulation of weighted committed effective dose equivalent (dose). Both maximum individual dose (critical group dose) and collective dose rates may be computed. (author)

Safety case for the disposal of spent nuclear fuel at Olkiluoto. Data basis for the Biosphere Assessment BSA-2012. Part 1-2, Appendices

International Nuclear Information System (INIS)

2014-01-01

The purpose of the report is to document and justify the input data used in the models of the biosphere assessment. Methodology similar to that presented in the Models and Data for the Repository System report has been followed. After more introductory parts, chapter 3 lays the foundation of data selection by describing typical properties of the soil and sediment types and biotopes, and summarises the representative plants and animals selected in the Biosphere Description report. The conceptual models on pools and fluxes of elements in the ecosystems are presented in chapter 4. These, together with the more qualitative descriptions of the succession lines in the Biosphere Description report, are simplified into the actual assessment models (summarised in chapter 5) in an iterative manner. Chapter 6 briefly presents the scenarios and calculation cases of the biosphere assessment, detailed in the Formulation of Radionuclide Releases Scenarios report. The account of the actual input data to the assessment models begins in chapter 7 with the data needed to identify the biotopes and compartments common to all assessment models. Chapters 8 to 13, grouped by the sub-models, address the input data to the terrain and ecosystems development modelling (detailed in the Terrain and Ecosystems Development Modelling report), and chapter 14 those to the surface and near-surface hydrological model (the Surface and Near-Surface Hydrological Modelling report). Chapters 15 to 18 address the data to the radionuclide transport modelling in the biosphere, and chapter 19 those needed for the dose assessment for humans (the Biosphere Radionuclide Transport and Dose Assessment report). Finally, before conclusions in chapter 21, the input data specific to the dose assessment for plants and animals (the Dose Assessment for the Plants and Animals report) are addressed in chapter 20. However, several parameters are common to the assessment models and are presented in connection to the model

Safety case for the disposal of spent nuclear fuel at Olkiluoto. Data basis for the Biosphere Assessment BSA-2012. Part 1-2, Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-01-15

The purpose of the report is to document and justify the input data used in the models of the biosphere assessment. Methodology similar to that presented in the Models and Data for the Repository System report has been followed. After more introductory parts, chapter 3 lays the foundation of data selection by describing typical properties of the soil and sediment types and biotopes, and summarises the representative plants and animals selected in the Biosphere Description report. The conceptual models on pools and fluxes of elements in the ecosystems are presented in chapter 4. These, together with the more qualitative descriptions of the succession lines in the Biosphere Description report, are simplified into the actual assessment models (summarised in chapter 5) in an iterative manner. Chapter 6 briefly presents the scenarios and calculation cases of the biosphere assessment, detailed in the Formulation of Radionuclide Releases Scenarios report. The account of the actual input data to the assessment models begins in chapter 7 with the data needed to identify the biotopes and compartments common to all assessment models. Chapters 8 to 13, grouped by the sub-models, address the input data to the terrain and ecosystems development modelling (detailed in the Terrain and Ecosystems Development Modelling report), and chapter 14 those to the surface and near-surface hydrological model (the Surface and Near-Surface Hydrological Modelling report). Chapters 15 to 18 address the data to the radionuclide transport modelling in the biosphere, and chapter 19 those needed for the dose assessment for humans (the Biosphere Radionuclide Transport and Dose Assessment report). Finally, before conclusions in chapter 21, the input data specific to the dose assessment for plants and animals (the Dose Assessment for the Plants and Animals report) are addressed in chapter 20. However, several parameters are common to the assessment models and are presented in connection to the model

Biosphere reserves: Attributes for success.

Science.gov (United States)

Van Cuong, Chu; Dart, Peter; Hockings, Marc

2017-03-01

Biosphere reserves established under the UNESCO Man and the Biosphere Program aim to harmonise biodiversity conservation and sustainable development. Concerns over the extent to which the reserve network was living up to this ideal led to the development of a new strategy in 1995 (the Seville Strategy) to enhance the operation of the network of reserves. An evaluation of effectiveness of management of the biosphere reserve network was called for as part of this strategy. Expert opinion was assembled through a Delphi Process to identify successful and less successful reserves and investigate common factors influencing success or failure. Ninety biosphere reserves including sixty successful and thirty less successful reserves in 42 countries across all five Man and the Biosphere Program regions were identified. Most successful sites are the post-Seville generation while the majority of unsuccessful sites are pre-Seville that are managed as national parks and have not been amended to conform to the characteristics that are meant to define a biosphere reserve. Stakeholder participation and collaboration, governance, finance and resources, management, and awareness and communication are the most influential factors in the success or failure of the biosphere reserves. For success, the biosphere reserve concept needs to be clearly understood and applied through landscape zoning. Designated reserves then need a management system with inclusive good governance, strong participation and collaboration, adequate finance and human resource allocation and stable and responsible management and implementation. All rather obvious but it is difficult to achieve without commitment to the biosphere reserve concept by the governance authorities. Copyright © 2016 Elsevier Ltd. All rights reserved.

A global model of carbon, nitrogen and phosphorus cycles for the terrestrial biosphere

Directory of Open Access Journals (Sweden)

Y. P. Wang

2010-07-01

Full Text Available Carbon storage by many terrestrial ecosystems can be limited by nutrients, predominantly nitrogen (N and phosphorus (P, in addition to other environmental constraints, water, light and temperature. However the spatial distribution and the extent of both N and P limitation at the global scale have not been quantified. Here we have developed a global model of carbon (C, nitrogen (N and phosphorus (P cycles for the terrestrial biosphere. Model estimates of steady state C and N pool sizes and major fluxes between plant, litter and soil pools, under present climate conditions, agree well with various independent estimates. The total amount of C in the terrestrial biosphere is 2767 Gt C, and the C fractions in plant, litter and soil organic matter are 19%, 4% and 77%. The total amount of N is 135 Gt N, with about 94% stored in the soil, 5% in the plant live biomass, and 1% in litter. We found that the estimates of total soil P and its partitioning into different pools in soil are quite sensitive to biochemical P mineralization. The total amount of P (plant biomass, litter and soil excluding occluded P in soil is 17 Gt P in the terrestrial biosphere, 33% of which is stored in the soil organic matter if biochemical P mineralization is modelled, or 31 Gt P with 67% in soil organic matter otherwise.

This model was used to derive the global distribution and uncertainty of N or P limitation on the productivity of terrestrial ecosystems at steady state under present conditions. Our model estimates that the net primary productivity of most tropical evergreen broadleaf forests and tropical savannahs is reduced by about 20% on average by P limitation, and most of the remaining biomes are N limited; N limitation is strongest in high latitude deciduous needle leaf forests, and reduces its net primary productivity by up to 40% under present conditions.

B33C-0612: Evaluation of Simulated Biospheric Carbon Dioxide Fluxes and Atmospheric Concentrations Using Global in Situ Observations

Science.gov (United States)

Philip, Sajeev; Johnson, Matthew S.; Potter, Christopher S.; Genovese, Vanessa

2016-01-01

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emission sources and biospheric sources/sinks. Global biospheric fluxes of CO2 are controlled by complex processes facilitating the exchange of carbon between terrestrial ecosystems and the atmosphere. These processes which play a key role in these terrestrial ecosystem-atmosphere carbon exchanges are currently not fully understood, resulting in large uncertainties in the quantification of biospheric CO2 fluxes. Current models with these inherent deficiencies have difficulties simulating the global carbon cycle with high accuracy. We are developing a new modeling platform, GEOS-Chem-CASA by integrating the year-specific NASA-CASA (National Aeronautics and Space Administration - Carnegie Ames Stanford Approach) biosphere model with the GEOS-Chem (Goddard Earth Observation System-Chemistry) chemical transport model to improve the simulation of atmosphere-terrestrial ecosystem carbon exchange. We use NASA-CASA to explicitly represent the exchange of CO2 between terrestrial ecosystem and atmosphere by replacing the baseline GEOS-Chem land net CO2 flux and forest biomass burning CO2 emissions. We will present the estimation and evaluation of these "bottom-up" land CO2 fluxes, simulated atmospheric mixing ratios, and forest disturbance changes over the last decade. In addition, we will present our initial comparison of atmospheric column-mean dry air mole fraction of CO2 predicted by the model and those retrieved from NASA's OCO-2 (Orbiting Carbon Observatory-2) satellite instrument and model-predicted surface CO2 mixing ratios with global in situ observations. This evaluation is the first step necessary for our future work planned to constrain the estimates of biospheric carbon fluxes through "top-down" inverse modeling, which will improve our understanding of the processes controlling atmosphere-terrestrial ecosystem greenhouse gas exchanges, especially over regions which lack in

Simulating the 2012 High Plains Drought Using Three Single Column Models (SCM)

Science.gov (United States)

Medina, I. D.; Baker, I. T.; Denning, S.; Dazlich, D. A.

2015-12-01

The impact of changes in the frequency and severity of drought on fresh water sustainability is a great concern for many regions of the world. One such location is the High Plains, where the local economy is primarily driven by fresh water withdrawals from the Ogallala Aquifer, which accounts for approximately 30% of total irrigation withdrawals from all U.S. aquifers combined. Modeling studies that focus on the feedback mechanisms that control the climate and eco-hydrology during times of drought are limited, and have used conventional General Circulation Models (GCMs) with grid length scales ranging from one hundred to several hundred kilometers. Additionally, these models utilize crude statistical parameterizations of cloud processes for estimating sub-grid fluxes of heat and moisture and have a poor representation of land surface heterogeneity. For this research, we focus on the 2012 High Plains drought and perform numerical simulations using three single column model (SCM) versions of BUGS5 (Colorado State University (CSU) GCM coupled to the Simple Biosphere Model (SiB3)). In the first version of BUGS5, the model is used in its standard bulk setting (single atmospheric column coupled to a single instance of SiB3), secondly, the Super-Parameterized Community Atmospheric Model (SP-CAM), a cloud resolving model (CRM) (CRM consists of 32 atmospheric columns), replaces the single CSU GCM atmospheric parameterization and is coupled to a single instance of SiB3, and for the third version of BUGS5, an instance of SiB3 is coupled to each CRM column of the SP-CAM (32 CRM columns coupled to 32 instances of SiB3). To assess the physical realism of the land-atmosphere feedbacks simulated by all three versions of BUGS5, differences in simulated energy and moisture fluxes are computed between the 2011 and 2012 period and are compared to those calculated using observational data from the AmeriFlux Tower Network for the same period at the ARM Site in Lamont, OK. This research

10 CFR 63.305 - Required characteristics of the reference biosphere.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Required characteristics of the reference biosphere. 63... Standards § 63.305 Required characteristics of the reference biosphere. (a) Features, events, and processes that describe the reference biosphere must be consistent with present knowledge of the conditions in...

Dose assessment considering evolution of the biosphere

International Nuclear Information System (INIS)

Karlsson, Sara; Bergstroem, Ulla

2002-01-01

Swedish Nuclear Fuel and Waste Management AB (SKB) is presently updating the safety assessment for SFR (Final repository for radioactive operational waste) in Sweden. The bio-spheric part of the analysis is performed by Studsvik Eco and Safety AB. According to the regulations the safety of the repository has to be accounted for different possible courses of the development of the biosphere. A number of studies have been carried out during the past years to investigate and document the biosphere in the area surrounding the repository. Modelling of shore-level displacement by land uplift, coastal water exchange and sedimentation have provided data for prediction of the evolution of the area. The prediction is done without considering a future change in climatic conditions. The results from this study show that accumulation of radionuclides in sediments is an important process to simulate when performing dose assessments covering biosphere evolution. The dose calculated for the first years of the period with agricultural use of the contaminated sediments may be severely underestimated in a scenario with large accumulation in coastal and lake stages. (LN)

Modelling the environmental transport of tritium in the vicinity of long term atmospheric and sub-surface sources. Report of the Tritium Working Group of the Biosphere Modelling and Assessment (BIOMASS) Programme, Theme 3

International Nuclear Information System (INIS)

2003-03-01

The IAEA Programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in Vienna in October 1996. The programme was concerned with developing and improving capabilities to predict the transfer of radionuclides in the environment. The programme had three themes: Theme 1: Radioactive Waste Disposal. The objective was to develop the concept of a standard or reference biosphere for application to the assessment of the long term safety of repositories for radioactive waste. Theme 2: Environmental Releases. BIOMASS provided an international forum for activities aimed at increasing the confidence in methods and models for the assessment of radiation exposure related to environmental releases. Two Working Groups addressed issues concerned with the reconstruction of radiation doses received by people from past releases of radionuclides to the environment and the evaluation of the efficacy of remedial measures. Theme 3: Biosphere Processes. The aim of this Theme was to improve capabilities for modelling the transfer of radionuclides in particular parts of the biosphere identified as being of potential radiological significance and where there were gaps in modelling approaches. This topic was explored using a range of methods including reviews of the literature, model inter-comparison exercises and, where possible, model testing against independent sources of data. Three Working Groups were established to examine the modelling of: (1) long term tritium dispersion in the environment; (2) radionuclide uptake by fruits; and (3) radionuclide migration and accumulation in forest ecosystems. This report describes results of the studies undertaken by the Tritium Working Group under Theme 3. It discusses the six model test exercises (three model-model intercomparisons and three model-data exercises) and the twenty-month field sampling programme undertaken to investigate the environmental transport of tritium in the vicinity of long term atmospheric and sub-surface sources

The biosphere: current status

International Nuclear Information System (INIS)

Thorne, M.C.

1988-06-01

This paper outlines the biosphere models and data required to assess the post-closure radiological impact of deep geological repositories for low and intermediate level radioactive wastes. It then goes on to show how these requirements are being met either within the Nirex Safety Assessment Research Programme or from other research programmes. (Author)

Illstrative probabilistic biosphere model for Yucca Mountain individual risk calculations

International Nuclear Information System (INIS)

Wilems, R.E.

1994-01-01

The proposed EPA Standards for the disposal of spent fuel, high-level and transuranic radioactive waste prescribe future biosphere--one in which no sustained human activity occurs inside the controlled zone, yet sustained use of groundwater occurs just outside the controlled zone boundary. Performance assessments have generally assumed a person at this location extracts all his water needs directly from the projected contaminated plume for all of his life. Dose to this maximally-exposed individual is too conservative a measure of performance for a nuclear waste repository and does not reflect the isolation characteristics of a site. A better measure is individual risk in which uncertainties in biosphere characteristics for the longer periods of performance, for a site like Yucca Mountain only those characteristics associated with well water scenarios need be prescribed. Such a prescription of the biosphere is appropriate because the goal of the regulations is to provide indicators of future performance so the regulators can make a responsible decision regarding reasonable assurance of public health and safety

Reference biospheres for the long term safety assessment of radioactive waste disposal facilities

International Nuclear Information System (INIS)

Crossland, I.G.; Torres, C.

2002-01-01

Regulatory guidance on the safety assessment of radioactive waste disposals usually requires the consequences of any radionuclide releases to be considered in terms of their potential impact on human health. This requires consideration of the prevailing biosphere and the habits of the potentially exposed humans within it. However, it could take many thousands of years for migrating radionuclides to reach the surface environment. In these circumstances, an assessment model that was based on the present-day biosphere could be inappropriate while future biospheres would be unpredictable. These and other considerations suggest that a standardised, or reference biosphere, approach may be useful. Theme 1 of the IAEA BIOMASS project was established to develop the concept of reference biospheres into a practical system that can be applied to the assessment of the long term safety of geological disposal facilities for radioactive waste. The technical phase of the project lasted for four years until November 2000 and brought together disparate interests from many countries including waste disposal agencies, regulators and technical experts. Building on the experience from earlier BIOMOVS projects, a methodology was constructed for the logical and defensible construction of mathematical biosphere models that can be used in the total system performance assessment of radioactive waste disposal. The methodology was then further developed through the creation of a series of BIOMASS Example Reference Biospheres ('Examples'). These are stylised biosphere models that, in addition to illustrating the methodology, are intended to be useful assessment tools in their own right. (author)

Methodology for biosphere analysis in high level waste disposal. Application to the Mediterranean system

International Nuclear Information System (INIS)

Pinedo, P.; Simon, I.; Aguero, A.; Cancio, D.

2000-01-01

For several years CIEMAT has been developing for ENRESA a conceptual approach and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water bodies or soils). The model development also includes evaluation of radiological impacts arising from the resulting distribution of radionuclides in the biosphere. At the time when the methodology was proposed, the level of development of the different aspects proposed within it was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects, like the procedure for conceptual model development and the description of biosphere systems representatives of the long term needed further developments. The developments have been performed in parallel to international projects, within which there were and are an active participation, mainly, the BIOphere Models Validation Study (BIOMOVS II) international Project, within which it was developed the so called Reference Biosphere Methodology and, the International Atomic Energy Agency (IAEA) Programme on BIOsphere Modelling and ASSessment methods (BIOMASS), that is under development at present. The methodology been made takes account of these international developments. The purpose of the work summarised herein is the application of the methodology to the 1997 performance assessment (PA) exercise made by ENRESA, using from it the general and particular information about the assessment context, the source term, and the geo-biosphere interface data. (author)

An improved land biosphere module for use in the DCESS Earth system model (version 1.1 with application to the last glacial termination

Directory of Open Access Journals (Sweden)

R. Eichinger

2017-09-01

Full Text Available Interactions between the land biosphere and the atmosphere play an important role for the Earth's carbon cycle and thus should be considered in studies of global carbon cycling and climate. Simple approaches are a useful first step in this direction but may not be applicable for certain climatic conditions. To improve the ability of the reduced-complexity Danish Center for Earth System Science (DCESS Earth system model DCESS to address cold climate conditions, we reformulated the model's land biosphere module by extending it to include three dynamically varying vegetation zones as well as a permafrost component. The vegetation zones are formulated by emulating the behaviour of a complex land biosphere model. We show that with the new module, the size and timing of carbon exchanges between atmosphere and land are represented more realistically in cooling and warming experiments. In particular, we use the new module to address carbon cycling and climate change across the last glacial transition. Within the constraints provided by various proxy data records, we tune the DCESS model to a Last Glacial Maximum state and then conduct transient sensitivity experiments across the transition under the application of explicit transition functions for high-latitude ocean exchange, atmospheric dust, and the land ice sheet extent. We compare simulated time evolutions of global mean temperature, pCO2, atmospheric and oceanic carbon isotopes as well as ocean dissolved oxygen concentrations with proxy data records. In this way we estimate the importance of different processes across the transition with emphasis on the role of land biosphere variations and show that carbon outgassing from permafrost and uptake of carbon by the land biosphere broadly compensate for each other during the temperature rise of the early last deglaciation.

The biosphere at Laxemar. Data, assumptions and models used in the SR-Can assessment

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern [eds.

2006-10-15

This is essentially a compilation of a variety of reports concerning the site investigations, the research activities and information derived from other sources important for the safety assessment. The main objective is to present prerequisites, methods and data used, in the biosphere modelling for the safety assessment SR-Can at the Laxemar site. A major part of the report focuses on how site-specific data are used, recalculated or modified in order to be applicable in the safety assessment context; and the methods and sub-models that are the basis for the biosphere modelling. Furthermore, the assumptions made as to the future states of surface ecosystems are mainly presented in this report. A similar report is provided for the Forsmark area. This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. A central tool in the work is the description of the topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary in collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis.

The biosphere at Laxemar. Data, assumptions and models used in the SR-Can assessment

International Nuclear Information System (INIS)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern

2006-10-01

This is essentially a compilation of a variety of reports concerning the site investigations, the research activities and information derived from other sources important for the safety assessment. The main objective is to present prerequisites, methods and data used, in the biosphere modelling for the safety assessment SR-Can at the Laxemar site. A major part of the report focuses on how site-specific data are used, recalculated or modified in order to be applicable in the safety assessment context; and the methods and sub-models that are the basis for the biosphere modelling. Furthermore, the assumptions made as to the future states of surface ecosystems are mainly presented in this report. A similar report is provided for the Forsmark area. This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. A central tool in the work is the description of the topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary in collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis

Psychometric appraisal of the Scale for Interpersonal Behavior (SIB) in France.

Science.gov (United States)

Bouvard, M; Arrindell, W A; Guérin, J; Bouchard, C; Rion, A C; Ducottet, E; Séchaud, M; Mollard, E; Grillet, P R; Dang, C; Cottraux, J

1999-08-01

The present study was carried out in France to evaluate the reliability and validity of the Scale for Interpersonal Behavior (SIB), a multidimensional measure of difficulty and distress in assertiveness that was originally developed in The Netherlands. This appraisal was conducted with a clinical sample (N = 166) and a general population sample (N = 150). The clinical series comprised 115 patients with social phobia and 51 patients with personality disorder, 28 of whom were of the avoidant type. Support was found for internal consistency and test-retest reliability of the French SIB. Compared to controls, both social phobics and patients with an avoidant personality disorder had significantly lower mean scores on all performance scales and significantly higher ones on all distress scales, with the social phobics occupying a position in between. Findings in relation to convergent and divergent validity were quite satisfactory. Sensitivity of the French SIB for detecting change was demonstrated in a subgroup of the clinical Ss who had undergone 15 sessions of cognitive-behavioral group therapy for underassertiveness.

Gene expression in the deep biosphere.

Science.gov (United States)

Orsi, William D; Edgcomb, Virginia P; Christman, Glenn D; Biddle, Jennifer F

2013-07-11

Scientific ocean drilling has revealed a deep biosphere of widespread microbial life in sub-seafloor sediment. Microbial metabolism in the marine subsurface probably has an important role in global biogeochemical cycles, but deep biosphere activities are not well understood. Here we describe and analyse the first sub-seafloor metatranscriptomes from anaerobic Peru Margin sediment up to 159 metres below the sea floor, represented by over 1 billion complementary DNA (cDNA) sequence reads. Anaerobic metabolism of amino acids, carbohydrates and lipids seem to be the dominant metabolic processes, and profiles of dissimilatory sulfite reductase (dsr) transcripts are consistent with pore-water sulphate concentration profiles. Moreover, transcripts involved in cell division increase as a function of microbial cell concentration, indicating that increases in sub-seafloor microbial abundance are a function of cell division across all three domains of life. These data support calculations and models of sub-seafloor microbial metabolism and represent the first holistic picture of deep biosphere activities.

It's the Biosphere, Stupid!

OpenAIRE

Cairns, John

2007-01-01

The biosphere is humankind s life support system and the source of the resources that drive exponential growth. Without the biospheric life support system functioning in a way that is favorable to humans, humankind could face extinctions.

A Better Representation of European Croplands into a Global Biosphere Model

Science.gov (United States)

Gervois, S.; de Noblet, N.; Viovy, N.; Ciais, P.; Brisson, N.; Seguin, B.

2002-12-01

Croplands cover a quarter of Europe's surface (about an hundred million hectares), their impact on carbon and water fluxes must therefore be estimated. Global biosphere models such as ORCHIDEE (http://www.ipsl.jussieu.fr/~ssipsl/) were conceived to simulate natural ecosystems only, so croplands are often described as grasslands. Not only cropland productivity depends on climate and soil conditions but also on irrigations, fertilisers impact, date of sowing... In addition crop species are usually selected genetically to shorten and accelerate their growth. Agronomic models such as STICS (Brisson et al. 1998) give a more realistic picture of croplands as they are especially designed to account for this human forcing. On the other hand they can be used at the local scale only. First we evaluate the ability of the two models to reproduce the seasonal behaviour the leaf area index (LAI), the aerial biomass, and the exchanges of water vapour and CO2 with the atmosphere. For that we compare the model outputs with measurements performed at five sites that are representative of most common European crops (wheat, corn, soybean). As expected the agronomic STICS better behaves than the generic model ORCHIDEE in representing the seasonal cycle of the above variables. In order to get a realistic representation of croplands areas at the regional scale, we decided to couple ORCHIDEE with STICS. First we present the main steps of the coupling procedure. The principle consists in forcing ORCHIDEE with five more realistic outputs of STICS: LAI, date of harvest, nitrogen stress, root profile, and vegetation height. On the other hand, ORCHIDEE computes its own carbon and water balance. The allocation scheme was also modified in ORCHIDEE in order to conserve the coherence between LAI and leaf biomass, and we added a harvest module into ORCHIDEE. The coupled model was validated against carbon and water fluxes observed respectively at two fields (wheat and corn) in the US. We also

Characterization of yields for Pinus taeda genotypes at the half-sib, full-sib, and varietal levels of genetic improvement at two planting densities at age 5 in the upper coastal plain of Georgia

Science.gov (United States)

Derek Dougherty; Michael Kane; Robert Teskey; Richard Daniels; Jeff Wright

2012-01-01

Seedling deployment options for the establishment of operational Pinus taeda plantations in the Southeastern U.S. now include half-sib families, full-sib crosses, and varietals. In 2005, a study to evaluate the effects of genotype and density on yield and quality was established on a moderately well-drained upland site in the Upper Coastal Plain in...

Estimation of Pre-industrial Nitrous Oxide Emission from the Terrestrial Biosphere

Science.gov (United States)

Xu, R.; Tian, H.; Lu, C.; Zhang, B.; Pan, S.; Yang, J.

2015-12-01

Nitrous oxide (N2O) is currently the third most important greenhouse gases (GHG) after methane (CH4) and carbon dioxide (CO2). Global N2O emission increased substantially primarily due to reactive nitrogen (N) enrichment through fossil fuel combustion, fertilizer production, and legume crop cultivation etc. In order to understand how climate system is perturbed by anthropogenic N2O emissions from the terrestrial biosphere, it is necessary to better estimate the pre-industrial N2O emissions. Previous estimations of natural N2O emissions from the terrestrial biosphere range from 3.3-9.0 Tg N2O-N yr-1. This large uncertainty in the estimation of pre-industrial N2O emissions from the terrestrial biosphere may be caused by uncertainty associated with key parameters such as maximum nitrification and denitrification rates, half-saturation coefficients of soil ammonium and nitrate, N fixation rate, and maximum N uptake rate. In addition to the large estimation range, previous studies did not provide an estimate on preindustrial N2O emissions at regional and biome levels. In this study, we applied a process-based coupled biogeochemical model to estimate the magnitude and spatial patterns of pre-industrial N2O fluxes at biome and continental scales as driven by multiple input data, including pre-industrial climate data, atmospheric CO2 concentration, N deposition, N fixation, and land cover types and distributions. Uncertainty associated with key parameters is also evaluated. Finally, we generate sector-based estimates of pre-industrial N2O emission, which provides a reference for assessing the climate forcing of anthropogenic N2O emission from the land biosphere.

Factual biosphere database for Dounreay and the surrounding area

International Nuclear Information System (INIS)

Broderick, M.A.

1991-12-01

This report documents from open published sources a factual database appropriate to the Dounreay region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Dounreay area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author)

Factual biosphere database for Dounreay and the surrounding area

Energy Technology Data Exchange (ETDEWEB)

Broderick, M A [ANS Consultants Ltd., Epsom (United Kingdom)

1991-12-01

This report documents from open published sources a factual database appropriate to the Dounreay region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Dounreay area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author).

Factual biosphere database for Sellafield and the surrounding area

Energy Technology Data Exchange (ETDEWEB)

Broderick, M A [ANS Consultants Ltd., Epsom (United Kingdom)

1991-12-01

This report documents from open published sources a factual database appropriate to the Sellafield region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Sellafield area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author).

Factual biosphere database for Sellafield and the surrounding area

International Nuclear Information System (INIS)

Broderick, M.A.

1991-12-01

This report documents from open published sources a factual database appropriate to the Sellafield region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Sellafield area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author)

Biosphere Modeling for the Dose Assessment of a HLW Repository: Development of ACBIO

Energy Technology Data Exchange (ETDEWEB)

Lee, Youn Myoung; Hwang, Yong Soo; Kang, Chul Hyung

2006-01-15

For the purpose of evaluating a dose rate to an individual due to a long-term release of nuclides from a HLW repository, a biosphere assessment model and an implemented code, ACBIO, based on the BIOMASS methodology have been developed by utilizing AMBER, a general compartment modeling tool. To demonstrate its practicability and usability as well as to observe the sensitivity of the compartment scheme, the concentration, the activity in the compartments as well as the annual flux between the compartments at their peak values, were calculated and investigated. For each case when changing the structure of the compartments and GBIs as well as varying selected input Kd values, all of which seem very important among the others, the dose rate per nuclide release rate is calculated separately and analyzed. From the maximum dose rates, the flux to dose conversion factors for each nuclide were derived, which are used for converting the nuclide release rate appearing from the geosphere through various GBIs to dose rates (Sv/y) for an individual in a critical group. It has also been observed that the compartment scheme, the identification of a possible exposure group and the GBIs could all be highly sensitive to the final consequences in a biosphere modeling.

Biosphere Modeling for the Dose Assessment of a HLW Repository: Development of ACBIO

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo; Kang, Chul Hyung

2006-01-01

For the purpose of evaluating a dose rate to an individual due to a long-term release of nuclides from a HLW repository, a biosphere assessment model and an implemented code, ACBIO, based on the BIOMASS methodology have been developed by utilizing AMBER, a general compartment modeling tool. To demonstrate its practicability and usability as well as to observe the sensitivity of the compartment scheme, the concentration, the activity in the compartments as well as the annual flux between the compartments at their peak values, were calculated and investigated. For each case when changing the structure of the compartments and GBIs as well as varying selected input Kd values, all of which seem very important among the others, the dose rate per nuclide release rate is calculated separately and analyzed. From the maximum dose rates, the flux to dose conversion factors for each nuclide were derived, which are used for converting the nuclide release rate appearing from the geosphere through various GBIs to dose rates (Sv/y) for an individual in a critical group. It has also been observed that the compartment scheme, the identification of a possible exposure group and the GBIs could all be highly sensitive to the final consequences in a biosphere modeling

Biosphere II: engineering of manned, closed ecological systems.

Science.gov (United States)

Dempster, W F

1991-01-01

Space Biospheres and Ventures, a private, for-profit firm, has undertaken a major research and development project in the study of biospheres, with the objective of creating and producing biospheres. Biosphere II-scheduled for completion in March 1991-will be essentially isolated from the existing biosphere by a closed structure, composed of components derived from the existing biosphere. Like the biosphere of the Earth, Biosphere II will be essentially closed to exchanges of material or living organisms with the surrounding environment and open to energy and information exchanges. Also, like the biosphere of the Earth, Biosphere II will contain five kingdoms of life, a variety of ecosystems, plus humankind, culture, and technics. The system is designed to be complex, stable and evolving throughout its intended 100-year lifespan, rather than static. Biosphere II will cover approximately 1.3 hectare and contain 200,000 m3 in volume, with seven major biomes: tropical rainforest, tropical savannah, marsh, marine, desert, intensive agriculture, and human habitat. An interdisciplinary team of leading scientific, ecological, management, architectural, and engineering consultants have been contracted by Space Biospheres Ventures for the project. Potential applications for biospheric systems include scientific and ecological management research, refuges for endangered species, and life habitats for manned stations on spacecraft or other planets.

Studying biosphere-atmosphere exchange of CO2 through Carbon-13 stable isotopes

NARCIS (Netherlands)

Velde, van der I.R.

2015-01-01

Summary Thesis ‘Studying biosphere-atmosphere exchange of CO2 through

carbon-13 stable isotopes’

Ivar van der Velde

Making predictions of future climate is difficult, mainly due to large uncertainties in the carbon cycle. The rate at which carbon is stored in the oceans and

Sensitivity study of land biosphere CO2 exchange through an atmospheric tracer transport model using satellite-derived vegetation index data

International Nuclear Information System (INIS)

Knorr, W.; Heimann, M.

1994-01-01

We develop a simple, globally uniform model of CO 2 exchange between the atmosphere and the terrestrial biosphere by coupling the model with a three-dimensional atmospheric tracer transport model using observed winds, and checking results against observed concentrations of CO 2 at various monitoring sites. CO 2 fluxes are derived from observed greenness using satellite-derived Global Vegetation Index data, combined with observations of temperature, radiation, and precipitation. We explore a range of CO 2 flux formulations together with some modifications of the modelled atmospheric transport. We find that while some formulations can be excluded, it cannot be decided whether or not to make CO 2 uptake and release dependent on water stress. It appears that the seasonality of net CO 2 fluxes in the tropics, which would be expected to be driven by water availability, is small and is therefore not visible in the seasonal cycle of atmospheric CO 2 . The latter is dominated largely by northern temperate and boreal vegetation, where seasonality is mostly temperature determined. We find some evidence that there is still considerable CO 2 release from soils during northern-hemisphere winter. An exponential air temperature dependence of soil release with a Q 10 of 1.5 is found to be most appropriate, with no cutoff at low freezing temperatures. This result is independent of the year from which observed winds were taken. This is remarkable insofar as year-to-year changes in modelled CO 2 concentrations caused by changes in the wind data clearly outweigh those caused by year-to-year variability in the climate and vegetation index data. (orig.)

An extensive phase space for the potential martian biosphere.

Science.gov (United States)

Jones, Eriita G; Lineweaver, Charles H; Clarke, Jonathan D

2011-12-01

We present a comprehensive model of martian pressure-temperature (P-T) phase space and compare it with that of Earth. Martian P-T conditions compatible with liquid water extend to a depth of ∼310 km. We use our phase space model of Mars and of terrestrial life to estimate the depths and extent of the water on Mars that is habitable for terrestrial life. We find an extensive overlap between inhabited terrestrial phase space and martian phase space. The lower martian surface temperatures and shallower martian geotherm suggest that, if there is a hot deep biosphere on Mars, it could extend 7 times deeper than the ∼5 km depth of the hot deep terrestrial biosphere in the crust inhabited by hyperthermophilic chemolithotrophs. This corresponds to ∼3.2% of the volume of present-day Mars being potentially habitable for terrestrial-like life.

Variability and budget of CO2 in Europe: analysis of the CAATER airborne campaigns - Part 2: Comparison of CO2 vertical variability and fluxes between observations and a modeling framework

International Nuclear Information System (INIS)

Xueref-Remy, I.; Bousquet, P.; Rivier, L.; Ciais, P.; Carouge, C.

2011-01-01

Our ability to predict future climate change relies on our understanding of current and future CO 2 fluxes, particularly on a regional scale (100-1000 km). CO 2 regional sources and sinks are still poorly understood. Inverse transport modeling, a method often used to quantify these fluxes, relies on atmospheric CO 2 measurements. One of the main challenges for the transport models used in the inversions is to properly reproduce CO 2 vertical gradients between the boundary layer and the free troposphere, as these gradients impact on the partitioning of the calculated fluxes between the different model regions. Vertical CO 2 profiles are very well suited to assess the performances of the models. In this paper, we conduct a comparison between observed and modeled CO 2 profiles recorded during two CAATER campaigns that occurred in May 2001 and October 2002 over Western Europe, as described in a companion paper. We test different combinations between a global transport model (LMDZt), a mesoscale transport model (CHIMERE), and different sets of biospheric fluxes, all chosen with a diurnal cycle (CASA, SiB2 and ORCHIDEE). The vertical profile comparison shows that: 1) in most cases the influence of the biospheric flux is small but sometimes not negligible, ORCHIDEE giving the best results in the present study; 2) LMDZt is most of the time too diffuse, as it simulates a too high boundary layer height; 3) CHIMERE better reproduces the observed gradients between the boundary layer and the free troposphere, but is sometimes too variable and gives rise to incoherent structures. We conclude there is a need for more vertical profiles to conduct further studies to improve the parameterization of vertical transport in the models used for CO 2 flux inversions. Furthermore, we use a modeling method to quantify CO 2 fluxes at the regional scale from a chosen observing point, coupling influence functions from the transport model LMDZt (that works quite well at the synoptic scale) with

Anthropogenic transformation of the terrestrial biosphere.

Science.gov (United States)

Ellis, Erle C

2011-03-13

Human populations and their use of land have transformed most of the terrestrial biosphere into anthropogenic biomes (anthromes), causing a variety of novel ecological patterns and processes to emerge. To assess whether human populations and their use of land have directly altered the terrestrial biosphere sufficiently to indicate that the Earth system has entered a new geological epoch, spatially explicit global estimates of human populations and their use of land were analysed across the Holocene for their potential to induce irreversible novel transformation of the terrestrial biosphere. Human alteration of the terrestrial biosphere has been significant for more than 8000 years. However, only in the past century has the majority of the terrestrial biosphere been transformed into intensively used anthromes with predominantly novel anthropogenic ecological processes. At present, even were human populations to decline substantially or use of land become far more efficient, the current global extent, duration, type and intensity of human transformation of ecosystems have already irreversibly altered the terrestrial biosphere at levels sufficient to leave an unambiguous geological record differing substantially from that of the Holocene or any prior epoch. It remains to be seen whether the anthropogenic biosphere will be sustained and continue to evolve.

The past, present and future supernova threat to Earth's biosphere

Science.gov (United States)

Beech, Martin

2011-12-01

A brief review of the threat posed to Earth's biosphere via near-by supernova detonations is presented. The expected radiation dosage, cosmic ray flux and expanding blast wave collision effects are considered, and it is argued that a typical supernova must be closer than ˜10-pc before any appreciable and potentially harmful atmosphere/biosphere effects are likely to occur. In contrast, the critical distance for Gamma-ray bursts is of order 1-kpc. In spite of the high energy effects potentially involved, the geological record provides no clear-cut evidence for any historic supernova induced mass extinctions and/or strong climate change episodes. This, however, is mostly a reflection of their being numerous possible (terrestrial and astronomical) forcing mechanisms acting upon the biosphere and the difficulty of distinguishing between competing scenarios. Key to resolving this situation, it is suggested, is the development of supernova specific extinction and climate change linked ecological models. Moving to the future, we estimate that over the remaining lifetime of the biosphere (˜2 Gyr) the Earth might experience 1 GRB and 20 supernova detonations within their respective harmful threat ranges. There are currently at least 12 potential pre-supernova systems within 1-kpc of the Sun. Of these systems IK Pegasi is the closest Type Ia pre-supernova candidate and Betelgeuse is the closest potential Type II supernova candidate. We review in some detail the past, present and future behavior of these two systems. Developing a detailed evolutionary model we find that IK Pegasi will likely not detonate until some 1.9 billion years hence, and that it affords absolutely no threat to Earth's biosphere. Betelgeuse is the closest, reasonably well understood, pre-supernova candidate to the Sun at the present epoch, and may undergo detonation any time within the next several million years. The stand-off distance of Betelgeuse at the time of its detonation is estimated to fall

A summary of biospheric research 1975-1997

Energy Technology Data Exchange (ETDEWEB)

Edlund, O.; Bergstroem, U.; Hallberg, B.; Karlsson, Sara [Studsvik Eco and Safety AB, Nykoeping (Sweden)

1999-12-01

The aim of this study is to present a summary of the work performed within the frame of SKB's biosphere programme during 1975 - 1997. The studies focused on field studies and theoretical model development. Important problems identified during this time period are pointed out. Summaries of the biospheric parts of the safety analyses performed since 1977 are given. Models are described as well as basic assumptions. Already the first analysis had an overall approach including dispersion from local to global zones with multiple exposure pathways. Compartment models have been used whereby the rate constants in the first assessments were mostly based on observed redistribution of radionuclides in nature. During the years emphasis has been laid on the description of processes mathematically and additional processes have been included in the models. In general, standard biospheres with constant environmental conditions were applied with focus on releases of radionuclides to wells, lakes and coastal areas. Drinking water has shown to be an important exposure pathway but not always the dominant one. Some screening calculations performed showed that peat bogs may be important recipients when doses to humans are concerned. The field studies initially focused on the naturally existing isotopes of U and Ra. A lot of studies were performed to gain data concerning the levels of these radionuclides in soils and waters. The studies also obtained information about back-ground values and the distribution between various biospheric components which was used to support model assumptions. A special sampling programme with the purpose to outline influence of drying up of lakes on the dose to individuals of critical group was also performed. The dose calculations showed that the doses could increase two orders of magnitude for immobile elements when the lake had dried up. Investigations of the natural abundance of radionuclides in soil and flora were performed later. After the

A summary of biospheric research 1975-1997

International Nuclear Information System (INIS)

Edlund, O.; Bergstroem, U.; Hallberg, B.; Karlsson, Sara

1999-12-01

The aim of this study is to present a summary of the work performed within the frame of SKB's biosphere programme during 1975 - 1997. The studies focused on field studies and theoretical model development. Important problems identified during this time period are pointed out. Summaries of the biospheric parts of the safety analyses performed since 1977 are given. Models are described as well as basic assumptions. Already the first analysis had an overall approach including dispersion from local to global zones with multiple exposure pathways. Compartment models have been used whereby the rate constants in the first assessments were mostly based on observed redistribution of radionuclides in nature. During the years emphasis has been laid on the description of processes mathematically and additional processes have been included in the models. In general, standard biospheres with constant environmental conditions were applied with focus on releases of radionuclides to wells, lakes and coastal areas. Drinking water has shown to be an important exposure pathway but not always the dominant one. Some screening calculations performed showed that peat bogs may be important recipients when doses to humans are concerned. The field studies initially focused on the naturally existing isotopes of U and Ra. A lot of studies were performed to gain data concerning the levels of these radionuclides in soils and waters. The studies also obtained information about back-ground values and the distribution between various biospheric components which was used to support model assumptions. A special sampling programme with the purpose to outline influence of drying up of lakes on the dose to individuals of critical group was also performed. The dose calculations showed that the doses could increase two orders of magnitude for immobile elements when the lake had dried up. Investigations of the natural abundance of radionuclides in soil and flora were performed later. After the Chernobyl

Preindustrial nitrous oxide emissions from the land biosphere estimated by using a global biogeochemistry model

Science.gov (United States)

Xu, Rongting; Tian, Hanqin; Lu, Chaoqun; Pan, Shufen; Chen, Jian; Yang, Jia; Zhang, Bowen

2017-07-01

To accurately assess how increased global nitrous oxide (N2O) emission has affected the climate system requires a robust estimation of the preindustrial N2O emissions since only the difference between current and preindustrial emissions represents net drivers of anthropogenic climate change. However, large uncertainty exists in previous estimates of preindustrial N2O emissions from the land biosphere, while preindustrial N2O emissions on the finer scales, such as regional, biome, or sector scales, have not been well quantified yet. In this study, we applied a process-based Dynamic Land Ecosystem Model (DLEM) to estimate the magnitude and spatial patterns of preindustrial N2O fluxes at the biome, continental, and global level as driven by multiple environmental factors. Uncertainties associated with key parameters were also evaluated. Our study indicates that the mean of the preindustrial N2O emission was approximately 6.20 Tg N yr-1, with an uncertainty range of 4.76 to 8.13 Tg N yr-1. The estimated N2O emission varied significantly at spatial and biome levels. South America, Africa, and Southern Asia accounted for 34.12, 23.85, and 18.93 %, respectively, together contributing 76.90 % of global total emission. The tropics were identified as the major source of N2O released into the atmosphere, accounting for 64.66 % of the total emission. Our multi-scale estimates provide a robust reference for assessing the climate forcing of anthropogenic N2O emission from the land biosphere

Preindustrial nitrous oxide emissions from the land biosphere estimated by using a global biogeochemistry model

Directory of Open Access Journals (Sweden)

R. Xu

2017-07-01

Full Text Available To accurately assess how increased global nitrous oxide (N2O emission has affected the climate system requires a robust estimation of the preindustrial N2O emissions since only the difference between current and preindustrial emissions represents net drivers of anthropogenic climate change. However, large uncertainty exists in previous estimates of preindustrial N2O emissions from the land biosphere, while preindustrial N2O emissions on the finer scales, such as regional, biome, or sector scales, have not been well quantified yet. In this study, we applied a process-based Dynamic Land Ecosystem Model (DLEM to estimate the magnitude and spatial patterns of preindustrial N2O fluxes at the biome, continental, and global level as driven by multiple environmental factors. Uncertainties associated with key parameters were also evaluated. Our study indicates that the mean of the preindustrial N2O emission was approximately 6.20 Tg N yr−1, with an uncertainty range of 4.76 to 8.13 Tg N yr−1. The estimated N2O emission varied significantly at spatial and biome levels. South America, Africa, and Southern Asia accounted for 34.12, 23.85, and 18.93 %, respectively, together contributing 76.90 % of global total emission. The tropics were identified as the major source of N2O released into the atmosphere, accounting for 64.66 % of the total emission. Our multi-scale estimates provide a robust reference for assessing the climate forcing of anthropogenic N2O emission from the land biosphere

Methodology for the biosphere evaluation during the RRAA management. Application for the Mediterranean system

International Nuclear Information System (INIS)

Pinedo, P.; Simon, I.; Aguero, A.

1998-01-01

For several years CIEMAT has been developing for ENRESA knowledge and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water impacts arising from the resulting distribution of radionuclides in the biosphere. In 1996, a Methodology to analyse the biosphere in the context of high level waste repositories was proposed to ENRESA, where the issues mentioned above were considered and treated. The level of development of the different aspects proposed within the Methodology was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects like the procedure for conceptual model development using the RES matrix and the description of biosphere systems representatives of the long term needed further developments. These own methodological developments have been developed in parallel with similar international developments within which there were and are an active participation, the BIOMOVS II international Project, finalized in 1996 and where it was developed the so called Reference Biosphere Methodology and, the International Atomic Energy Agency (IAEA) Programme on Biosphere Modelling and Assessment (BIOMASS), that is developed at present in collaboration with several national organizations, ENRESA and CIEMAT among them. The work described here takes account of these international developments. The overall purpose of this work is to apply the Methodology, to the last performance assessment (PA) exercise made by ENRESA, using form it the general and particular information about the assessment context, the source term, and the geo-biosphere interface data. (Author) 6 refs

A dosimetric comparison of 3D-CRT, IMRT, and static tomotherapy with an SIB for large and small breast volumes

Energy Technology Data Exchange (ETDEWEB)

Michalski, Andrea [Department of Health Science (MRS), The University of Sydney, Lidcombe, New South Wales (Australia); Central Coast Cancer Centre, Gosford Hospital, Gosford, New South Wales (Australia); Atyeo, John, E-mail: john.atyeo@sydney.edu.au [Department of Health Science (MRS), The University of Sydney, Lidcombe, New South Wales (Australia); Cox, Jennifer [Department of Health Science (MRS), The University of Sydney, Lidcombe, New South Wales (Australia); Department of Radiation Oncology, Royal North Shore Hospital, St Leonards, New South Wales (Australia); Rinks, Marianne [Department of Health Science (MRS), The University of Sydney, Lidcombe, New South Wales (Australia); Radiation Oncology, Cancer Services, Illawarra Shoalhaven Local Health District, Wollongong, New South Wales (Australia); Morgia, Marita; Lamoury, Gillian [Department of Radiation Oncology, Royal North Shore Hospital, St Leonards, New South Wales (Australia)

2014-07-01

Radiation therapy to the breast is a complex task, with many different techniques that can be employed to ensure adequate dose target coverage while minimizing doses to the organs at risk. This study compares the dose planning outcomes of 3 radiation treatment modalities, 3 dimensional conformal radiation therapy (3D-CRT), intensity-modulated radiation therapy (IMRT), and static tomotherapy, for left-sided whole-breast radiation treatment with a simultaneous integrated boost (SIB). Overall, 20 patients with left-sided breast cancer were separated into 2 cohorts, small and large, based on breast volume. Dose plans were produced for each patient using 3D-CRT, IMRT, and static tomotherapy. All patients were prescribed a dose of 45 Gy in 20 fractions to the breast with an SIB of 56 Gy in 20 fractions to the tumor bed and normalized so that D{sub 98%} > 95% of the prescription dose. Dosimetric comparisons were made between the 3 modalities and the interaction of patient size. All 3 modalities offered adequate planning target volume (PTV) coverage with D{sub 98%} > 95% and D{sub 2%} < 107%. Static tomotherapy offered significantly improved (p = 0.006) dose homogeneity to the PTV{sub boost} {sub eval} (0.079 ± 0.011) and breast minus the SIB volume (Breast{sub SIB}) (p < 0.001, 0.15 ± 0.03) compared with the PTV{sub boost} {sub eval} (0.085 ± 0.008, 0.088 ± 0.12) and Breast{sub SIB} (0.22 ± 0.05, 0.23 ± 0.03) for IMRT and 3D-CRT, respectively. Static tomotherapy also offered statistically significant reductions (p < 0.001) in doses to the ipsilateral lung mean dose of 6.79 ± 2.11 Gy compared with 7.75 ± 2.54 Gy and 8.29 ± 2.76 Gy for IMRT and 3D-CRT, respectively, and significantly (p < 0.001) reduced heart doses (mean = 2.83 ± 1.26 Gy) compared to both IMRT and 3D-CRT (mean = 3.70 ± 1.44 Gy and 3.91 ± 1.58 Gy). Static tomotherapy is the dosimetrically superior modality for the whole breast with an SIB compared with IMRT and 3D-CRT. IMRT is superior to 3D

Building capital through bioregional planning and biosphere reserves

Directory of Open Access Journals (Sweden)

David Brunckhorst

2001-02-01

Full Text Available ABSTRACT: The need to implement innovative approaches to sustainability is now more critical than ever. This discussion draws on parts of the puzzle that must be assembled to achieve integrated, cross-tenure and jurisdictional management of whole regions and their peoples for a sustainable future. A regional, landscape ecology approach helps us to move on from theory and historical lessons to boldly design and adaptively develop novel on-ground models. To take an entirely different approach from conventional thinking, I draw from Common Property Resource (CPR theory and experience, together with practical experience from the Bookmark Biosphere project. The characteristics of successful enduring Common Property regimes are identified and discussed in light of critical needs to maintain and restore social and ecological capital. I then highlight the concepts and logistical objectives behind the 30-year-old UNESCO Biosphere Reserve Program, which appears to have great potential as an operational framework within which these changes can be made. The Biosphere Reserve Program is maturing through integration of cultural needs and aspirations for quality of life, while conserving natural values and ecosystem processes. In particular, progress is being made through bioregional planning and management incorporating a variety of IUCN protected area types with novel, sustainable, resource-use diversification. The novel arrangements, experience and lessons from one developing model, Bookmark Biosphere Reserve in South Australia, are described as an example. I wish to encourage more models like the Bookmark experiment to evolve through even greater creativity and engagement with public and private partners. On-ground models that demonstrate innovative alternative land use management in the rangelands or integration across the coastal-marine interface are especially needed.

Variability and budget of CO2 in Europe: analysis of the CAATER airborne campaigns – Part 2: Comparison of CO2 vertical variability and fluxes between observations and a modeling framework

Directory of Open Access Journals (Sweden)

P. Ciais

2011-06-01

Full Text Available Our ability to predict future climate change relies on our understanding of current and future CO2 fluxes, particularly on a regional scale (100–1000 km. CO2 regional sources and sinks are still poorly understood. Inverse transport modeling, a method often used to quantify these fluxes, relies on atmospheric CO2 measurements. One of the main challenges for the transport models used in the inversions is to properly reproduce CO2 vertical gradients between the boundary layer and the free troposphere, as these gradients impact on the partitioning of the calculated fluxes between the different model regions. Vertical CO2 profiles are very well suited to assess the performances of the models. In this paper, we conduct a comparison between observed and modeled CO2 profiles recorded during two CAATER campaigns that occurred in May 2001 and October 2002 over Western Europe, as described in a companion paper. We test different combinations between a global transport model (LMDZt, a mesoscale transport model (CHIMERE, and different sets of biospheric fluxes, all chosen with a diurnal cycle (CASA, SiB2 and ORCHIDEE. The vertical profile comparison shows that: 1 in most cases the influence of the biospheric flux is small but sometimes not negligible, ORCHIDEE giving the best results in the present study; 2 LMDZt is most of the time too diffuse, as it simulates a too high boundary layer height; 3 CHIMERE better reproduces the observed gradients between the boundary layer and the free troposphere, but is sometimes too variable and gives rise to incoherent structures. We conclude there is a need for more vertical profiles to conduct further studies to improve the parameterization of vertical transport in the models used for CO2 flux inversions. Furthermore, we use a modeling method to quantify CO2 fluxes at the regional scale from a chosen observing point, coupling influence functions from the transport model LMDZt (that works quite well at the synoptic

Database for radionuclide transport in the biosphere

International Nuclear Information System (INIS)

Jiskra, J.

1985-01-01

The biosphere model is the final link in the chain of radionuclide transport models, used for radiation dose calculations from high level waste repositories. This report presents the data needed for biosphere calculations and discusses them where necessary. The first part is dedicated to the nuclide specific parameters like distribution coefficients (water - soil), concentration ratios (soil - plant) and distribution factors (for milk, meat etc.) which are reported in the literature. The second part contains the choice of regions, their division into compartments and the discussion of nutritional habits for man and animals. At the end a theoretical population for each region is estimated based on the consumption rates and on the yield of agricultural products, assuming an autonomous nutrition. (Auth.)

Association analysis of 31 common polymorphisms with type 2 diabetes and its related traits in Indian sib pairs.

Science.gov (United States)

Gupta, V; Vinay, D G; Rafiq, S; Kranthikumar, M V; Janipalli, C S; Giambartolomei, C; Evans, D M; Mani, K R; Sandeep, M N; Taylor, A E; Kinra, S; Sullivan, R M; Bowen, L; Timpson, N J; Smith, G D; Dudbridge, F; Prabhakaran, D; Ben-Shlomo, Y; Reddy, K S; Ebrahim, S; Chandak, G R

2012-02-01

Evaluation of the association of 31 common single nucleotide polymorphisms (SNPs) with fasting glucose, fasting insulin, HOMA-beta cell function (HOMA-β), HOMA-insulin resistance (HOMA-IR) and type 2 diabetes in the Indian population. We genotyped 3,089 sib pairs recruited in the Indian Migration Study from four cities in India (Lucknow, Nagpur, Hyderabad and Bangalore) for 31 SNPs in 24 genes previously associated with type 2 diabetes in European populations. We conducted within-sib-pair analysis for type 2 diabetes and its related quantitative traits. The risk-allele frequencies of all the SNPs were comparable with those reported in western populations. We demonstrated significant associations of CXCR4 (rs932206), CDKAL1 (rs7756992) and TCF7L2 (rs7903146, rs12255372) with fasting glucose, with β values of 0.007 (p = 0.05), 0.01 (p = 0.01), 0.007 (p = 0.05), 0.01 (p = 0.003) and 0.08 (p = 0.01), respectively. Variants in NOTCH2 (rs10923931), TCF-2 (also known as HNF1B) (rs757210), ADAM30 (rs2641348) and CDKN2A/B (rs10811661) significantly predicted fasting insulin, with β values of -0.06 (p = 0.04), 0.05 (p = 0.05), -0.08 (p = 0.01) and -0.08 (p = 0.02), respectively. For HOMA-IR, we detected associations with TCF-2, ADAM30 and CDKN2A/B, with β values of 0.05 (p = 0.04), -0.07 (p = 0.03) and -0.08 (p = 0.02), respectively. We also found significant associations of ADAM30 (β = -0.05; p = 0.01) and CDKN2A/B (β = -0.05; p = 0.03) with HOMA-β. THADA variant (rs7578597) was associated with type 2 diabetes (OR 1.5; 95% CI 1.04, 2.22; p = 0.03). We validated the association of seven established loci with intermediate traits related to type 2 diabetes in an Indian population using a design resistant to population stratification.

Models of radionuclide distribution in the biosphere for radioactive waste storage safety assessment, collection of data and calculation of the biosphere dose conversion factors. Research report

International Nuclear Information System (INIS)

Landa, Jiri

2008-12-01

The core of the report is structured as follows: The biosphere dose conversion factor (BDCF); Foreign approaches (Sweden - SKB, USA - YMP, BIOPROTA); Definition and conversion factors for activity; Effective dose rate calculation (ingestion, inhalation, external irradiation); Analysis of the activity of the surface compartment, i.e. soil; Basic conceptual models of ecosystems; BDCF calculation/determination; and Systemization of the literature. (P.A.)

Olkiluoto biosphere description 2006

International Nuclear Information System (INIS)

Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

2007-02-01

This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

Atmospheric dynamics and bioregenerative technologies in a soil-based ecological life support system: Initial results from biosphere 2

Science.gov (United States)

Nelson, M.; Dempster, W.; Alvarez-Romo, N.; MacCallum, T.

1994-11-01

Biosphere 2 is the first man-made, soil-based, bioregenerative life support system to be developed and tested. The utilization and amendment of local space resources, e.g. martian soil or lunar regolith, for agricultural and other purposes will be necesary if we are to minimize the requirement for Earth materials in the creation of long-term off-planet bases and habitations. Several of the roles soil plays in Biosphere 2 are 1) for air purification 2) as a key component in created wetland systems to recycle human and animal wastes and 3) as nutrient base for a sustainable agricultural cropping program. Initial results from the Biosphere 2 closure experiment are presented. These include the accelerated cycling rates due to small reservoir sizes, strong diurnal and seasonal fluxes in atmospheric CO2, an unexpected and continuing decline in atmospheric oxygen, overall maintenance of low levels of trace gases, recycling of waste waters through biological regeneration systems, and operation of an agriculture designed to provide diverse and nutritionally adequate diets for the crew members.

Atmospheric dynamics and bioregenerative technologies in a soil-based ecological life support system: initial results from Biosphere 2.

Science.gov (United States)

Nelson, M; Dempster, W; Alvarez-Romo, N; MacCallum, T

1994-11-01

Biosphere 2 is the first man-made, soil-based, bioregenerative life support system to be developed and tested. The utilization and amendment of local space resources, e.g. martian soil or lunar regolith, for agricultural and other purposes will be necessary if we are to minimize the requirement for Earth materials in the creation of long-term off-planet bases and habitations. Several of the roles soil plays in Biosphere 2 are 1) for air purification 2) as a key component in created wetland systems to recycle human and animal wastes and 3) as nutrient base for a sustainable agricultural cropping program. Initial results from the Biosphere 2 closure experiment are presented. These include the accelerated cycling rates due to small reservoir sizes, strong diurnal and seasonal fluxes in atmospheric CO2, an unexpected and continuing decline in atmospheric oxygen, overall maintenance of low levels of trace gases, recycling of waste waters through biological regeneration systems, and operation of an agriculture designed to provide diverse and nutritionally adequate diets for the crew members.

Some viewpoints on reference biospheres in Finnish performance assessments

International Nuclear Information System (INIS)

Rasilainen, K.; Kattilakoski, E.; Suolanen, V.; Vieno, T.; Vuori, S.

2002-01-01

Viewpoints are presented concerning biosphere studies in performance assessments of nuclear waste disposal. The points are based on experiences from several Finnish performance assessments. The latest performance assessment for spent fuel disposal, TILA-99, was considered in the Decision in Principle process for the site selection of the repository. The points given are also based on experiences from participation in international projects dealing with biosphere modelling, for instance BIOMOVS and BIOMASS. (author)

Two sibs who are double heterozygotes for achondroplasia and pseudoachondroplastic dysplasia.

OpenAIRE

Woods, C G; Rogers, J G; Mayne, V

1994-01-01

We report a family in which two sibs have both achondroplasia and pseudoachondroplastic dysplasia. The mother has achondroplasia and the father has pseudoachondroplastic dysplasia, which he had inherited from his father. Both children appeared typical of achondroplasia at birth. By 1 1/2 years they had developed a fixed lumbar kyphosis with gibbus and had additional x ray changes unusual for just achondroplasia and suggestive of pseudoachondroplastic dysplasia. Subsequently both children have...

Pharmaceutical Residues Affecting the UNESCO Biosphere Reserve Kristianstads Vattenrike Wetlands

DEFF Research Database (Denmark)

Björklund, Erland; Svahn, Ola; Bak, Søren Alex

2016-01-01

This study is the first to investigate the pharmaceutical burden from point sources affecting the UNESCO Biosphere Reserve Kristianstads Vattenrike, Sweden. The investigated Biosphere Reserve is a >1000 km(2) wetland system with inflows from lakes, rivers, leachate from landfill, and wastewater......-treatment plants (WWTPs). We analysed influent and treated wastewater, leachate water, lake, river, and wetland water alongside sediment for six model pharmaceuticals. The two WWTPs investigated released pharmaceutical residues at levels close to those previously observed in Swedish monitoring exercises. Compound......-dependent WWTP removal efficiencies ranging from 12 to 100 % for bendroflumethiazide, oxazepam, atenolol, carbamazepine, and diclofenac were observed. Surface-water concentrations in the most affected lake were ≥100 ng/L for the various pharmaceuticals with atenolol showing the highest levels (>300 ng...

The biosphere rules.

Science.gov (United States)

Unruh, Gregory C

2008-02-01

Sustainability, defined by natural scientists as the capacity of healthy ecosystems to function indefinitely, has become a clarion call for business. Leading companies have taken high-profile steps toward achieving it: Wal-Mart, for example, with its efforts to reduce packaging waste, and Nike, which has removed toxic chemicals from its shoes. But, says Unruh, the director of Thunderbird's Lincoln Center for Ethics in Global Management, sustainability is more than an endless journey of incremental steps. It is a destination, for which the biosphere of planet Earth--refined through billions of years of trial and error--is a perfect model. Unruh distills some lessons from the biosphere into three rules: Use a parsimonious palette. Managers can rethink their sourcing strategies and dramatically simplify the number and types of materials their companies use in production, making recycling cost-effective. After the furniture manufacturer Herman Miller discovered that its leading desk chair had 200 components made from more than 800 chemical compounds, it designed an award-winning successor whose far more limited materials palette is 96% recyclable. Cycle up, virtuously. Manufacturers should design recovery value into their products at the outset. Shaw Industries, for example, recycles the nylon fiber from its worn-out carpet into brand-new carpet tile. Exploit the power of platforms. Platform design in industry tends to occur at the component level--but the materials in those components constitute a more fundamental platform. Patagonia, by recycling Capilene brand performance underwear, has achieved energy costs 76% below those for virgin sourcing. Biosphere rules can teach companies how to build ecologically friendly products that both reduce manufacturing costs and prove highly attractive to consumers. And managers need not wait for a green technological revolution to implement them.

Decadal trends in the seasonal-cycle amplitude of terrestrial CO2 exchange resulting from the ensemble of terrestrial biosphere models

Directory of Open Access Journals (Sweden)

Akihiko Ito

2016-05-01

Full Text Available The seasonal-cycle amplitude (SCA of the atmosphere–ecosystem carbon dioxide (CO2 exchange rate is a useful metric of the responsiveness of the terrestrial biosphere to environmental variations. It is unclear, however, what underlying mechanisms are responsible for the observed increasing trend of SCA in atmospheric CO2 concentration. Using output data from the Multi-scale Terrestrial Model Intercomparison Project (MsTMIP, we investigated how well the SCA of atmosphere–ecosystem CO2 exchange was simulated with 15 contemporary terrestrial ecosystem models during the period 1901–2010. Also, we made attempt to evaluate the contributions of potential mechanisms such as atmospheric CO2, climate, land-use, and nitrogen deposition, through factorial experiments using different combinations of forcing data. Under contemporary conditions, the simulated global-scale SCA of the cumulative net ecosystem carbon flux of most models was comparable in magnitude with the SCA of atmospheric CO2 concentrations. Results from factorial simulation experiments showed that elevated atmospheric CO2 exerted a strong influence on the seasonality amplification. When the model considered not only climate change but also land-use and atmospheric CO2 changes, the majority of the models showed amplification trends of the SCAs of photosynthesis, respiration, and net ecosystem production (+0.19 % to +0.50 % yr−1. In the case of land-use change, it was difficult to separate the contribution of agricultural management to SCA because of inadequacies in both the data and models. The simulated amplification of SCA was approximately consistent with the observational evidence of the SCA in atmospheric CO2 concentrations. Large inter-model differences remained, however, in the simulated global tendencies and spatial patterns of CO2 exchanges. Further studies are required to identify a consistent explanation for the simulated and observed amplification trends, including their

TM9/Phg1 and SadA proteins control surface expression and stability of SibA adhesion molecules in Dictyostelium.

Science.gov (United States)

Froquet, Romain; le Coadic, Marion; Perrin, Jackie; Cherix, Nathalie; Cornillon, Sophie; Cosson, Pierre

2012-02-01

TM9 proteins form a family of conserved proteins with nine transmembrane domains essential for cellular adhesion in many biological systems, but their exact role in this process remains unknown. In this study, we found that genetic inactivation of the TM9 protein Phg1A dramatically decreases the surface levels of the SibA adhesion molecule in Dictyostelium amoebae. This is due to a decrease in sibA mRNA levels, in SibA protein stability, and in SibA targeting to the cell surface. A similar phenotype was observed in cells devoid of SadA, a protein that does not belong to the TM9 family but also exhibits nine transmembrane domains and is essential for cellular adhesion. A contact site A (csA)-SibA chimeric protein comprising only the transmembrane and cytosolic domains of SibA and the extracellular domain of the Dictyostelium surface protein csA also showed reduced stability and relocalization to endocytic compartments in phg1A knockout cells. These results indicate that TM9 proteins participate in cell adhesion by controlling the levels of adhesion proteins present at the cell surface.

Developments in radiological assessment and biosphere modelling studies to support radioactive waste disposal in Spain

Energy Technology Data Exchange (ETDEWEB)

Perez-Sanchez, D. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas - CIEMAT (Spain); Thorne, M. [Mike Thorne and Associates Limited (United States)

2014-07-01

Long-term safety assessments for the disposal of radioactive waste in Spain involve the demonstration that annual radiation doses to humans due to potential releases of radionuclides from the waste disposal facility into the biosphere will satisfy the regulatory criteria. For several years, CIEMAT has been developing, for ENRESA, a conceptual approach and tool to support modelling of the migration and accumulation of radionuclides within environmental media once those radionuclides have been released to some component of the biosphere (atmosphere, water bodies or soils). The CIEMAT modelling approach calculates the concentrations of radionuclides in different components of the biosphere and then the calculated radionuclide concentrations are used to estimate the radiation doses to humans due to various exposure paths. In this paper, we not only describe the methodology and modelling approach, we also describe recent developments of that approach to better quantify the resultant doses to humans. First, we present recent developments in the mathematical model for the behaviour of {sup 79}Se and {sup 238}U-series radionuclides in soils and their uptake by plants, taking into account seasonal variations in soil hydrology in Spain. Initial studies with the model that are reported here demonstrate that it is a powerful tool for exploring the behaviour of redox-sensitive radionuclides and {sup 238}U decay chain members in soil-plant systems under different hydrological regimes. In particular, it permits studies of the degree to which secular equilibrium assumptions are appropriate when modelling the {sup 238}U decay chain. Further studies are currently being undertaken examining sensitivities of model results to input parameter values and also applying the model to sites contaminated with {sup 238}U-series radionuclides. It is anticipated that results from these studies will also be reported. A particular interest in biosphere safety assessment is how environmental

Carbon isotope discrimination of arctic and boreal biomes inferred from remote atmospheric measurements and a biosphere-atmosphere model - art. no. 1028

Energy Technology Data Exchange (ETDEWEB)

Randerson, J.T.; Still, C.J.; Balle, J.J.; Fung, I.Y.; Doney, S.C.; Tans, P.P.; Conway, T.J.; White, J.W.C.; Vaughn, B.; Suits, N.; Denning, A.S. [CALTECH, Pasadena, CA (United States). Div. of Geology & Planetary Science

2002-07-01

Estimating discrimination against C-13 during photosynthesis at landscape, regional, and biome scales is difficult because of large-scale variability in plant stress, vegetation composition, and photosynthetic pathway. The authors present estimates of C-13 discrimination for northern biomes based on a biosphere-atmosphere model and on National Oceanic and Atmospheric Administration Climate Monitoring and Diagnostics Laboratory and Institute of Arctic and Alpine Research remote flask measurements. With the inversion approach, solutions were found for three ecophysiological parameters of the northern biosphere {delta}{sup 13}C discrimination, a net primary production light use efficiency, and a temperature sensitivity of heterotrophic respiration (a Q10 factor) that provided a best fit between modeled and observed {delta}{sup 13}C and CO{sub 2}. The analysis attempted to explicitly correct for fossil fuel emissions, remote C4 ecosystem fluxes, ocean exchange, and isotopic disequilibria of terrestrial heterotrophic respiration caused by the Suess effect. A photosynthetic discrimination was obtained for arctic and boreal biomes between 19.0 and 19.6%. The inversion analysis suggests that Q10 and light use efficiency values that minimize the cost function covary. The optimal light use efficiency was 0.47 gC MJ{sup -1} photosynthetically active radiation, and the optimal Q10 value was 1.52. Fossil fuel and ocean exchange contributed proportionally more to month-to-month changes in the atmospheric growth rate of {delta}{sup 13}C and CO{sub 2} during winter months, suggesting that remote atmospheric observations during the summer may yield more precise estimates of the isotopic composition of the biosphere.

A randomized phase II/III study of adverse events between sequential (SEQ) versus simultaneous integrated boost (SIB) intensity modulated radiation therapy (IMRT) in nasopharyngeal carcinoma; preliminary result on acute adverse events.

Science.gov (United States)

Songthong, Anussara P; Kannarunimit, Danita; Chakkabat, Chakkapong; Lertbutsayanukul, Chawalit

2015-08-08

To investigate acute and late toxicities comparing sequential (SEQ-IMRT) versus simultaneous integrated boost intensity modulated radiotherapy (SIB-IMRT) in nasopharyngeal carcinoma (NPC) patients. Newly diagnosed stage I-IVB NPC patients were randomized to receive SEQ-IMRT or SIB-IMRT, with or without chemotherapy. SEQ-IMRT consisted of two sequential radiation treatment plans: 2 Gy x 25 fractions to low-risk planning target volume (PTV-LR) followed by 2 Gy x 10 fractions to high-risk planning target volume (PTV-HR). In contrast, SIB-IMRT consisted of only one treatment plan: 2.12 Gy and 1.7 Gy x 33 fractions to PTV-HR and PTV-LR, respectively. Toxicities were evaluated according to CTCAE version 4.0. Between October 2010 and November 2013, 122 eligible patients were randomized between SEQ-IMRT (54 patients) and SIB-IMRT (68 patients). With median follow-up time of 16.8 months, there was no significant difference in toxicities between the two IMRT techniques. During chemoradiation, the most common grade 3-5 acute toxicities were mucositis (15.4% vs 13.6%, SEQ vs SIB, p = 0.788) followed by dysphagia (9.6% vs 9.1%, p = 1.000) and xerostomia (9.6% vs 7.6%, p = 0.748). During the adjuvant chemotherapy period, 25.6% and 32.7% experienced grade 3 weight loss in SEQ-IMRT and SIB-IMRT (p = 0.459). One-year overall survival (OS) and progression-free survival (PFS) were 95.8% and 95.5% in SEQ-IMRT and 98% and 90.2% in SIB-IMRT, respectively (p = 0.472 for OS and 0.069 for PFS). This randomized, phase II/III trial comparing SIB-IMRT versus SEQ-IMRT in NPC showed no statistically significant difference between both IMRT techniques in terms of acute adverse events. Short-term tumor control and survival outcome were promising.

A randomized phase II/III study of adverse events between sequential (SEQ) versus simultaneous integrated boost (SIB) intensity modulated radiation therapy (IMRT) in nasopharyngeal carcinoma; preliminary result on acute adverse events

International Nuclear Information System (INIS)

Songthong, Anussara P.; Kannarunimit, Danita; Chakkabat, Chakkapong; Lertbutsayanukul, Chawalit

2015-01-01

To investigate acute and late toxicities comparing sequential (SEQ-IMRT) versus simultaneous integrated boost intensity modulated radiotherapy (SIB-IMRT) in nasopharyngeal carcinoma (NPC) patients. Newly diagnosed stage I-IVB NPC patients were randomized to receive SEQ-IMRT or SIB-IMRT, with or without chemotherapy. SEQ-IMRT consisted of two sequential radiation treatment plans: 2Gy x 25 fractions to low-risk planning target volume (PTV-LR) followed by 2Gy x 10 fractions to high-risk planning target volume (PTV-HR). In contrast, SIB-IMRT consisted of only one treatment plan: 2.12Gy and 1.7Gy x 33 fractions to PTV-HR and PTV-LR, respectively. Toxicities were evaluated according to CTCAE version 4.0. Between October 2010 and November 2013, 122 eligible patients were randomized between SEQ-IMRT (54 patients) and SIB-IMRT (68 patients). With median follow-up time of 16.8 months, there was no significant difference in toxicities between the two IMRT techniques. During chemoradiation, the most common grade 3–5 acute toxicities were mucositis (15.4 % vs 13.6 %, SEQ vs SIB, p = 0.788) followed by dysphagia (9.6 % vs 9.1 %, p = 1.000) and xerostomia (9.6 % vs 7.6 %, p = 0.748). During the adjuvant chemotherapy period, 25.6 % and 32.7 % experienced grade 3 weight loss in SEQ-IMRT and SIB-IMRT (p = 0.459). One-year overall survival (OS) and progression-free survival (PFS) were 95.8 % and 95.5 % in SEQ-IMRT and 98 % and 90.2 % in SIB-IMRT, respectively (p = 0.472 for OS and 0.069 for PFS). This randomized, phase II/III trial comparing SIB-IMRT versus SEQ-IMRT in NPC showed no statistically significant difference between both IMRT techniques in terms of acute adverse events. Short-term tumor control and survival outcome were promising

Food production and nutrition for the crew during the first 2-year closure of Biosphere 2.

Science.gov (United States)

Silverstone, S E

1997-01-01

Biosphere 2's finite natural resources: atmosphere, plants, water, and soil, and its unique increased rate of nutrient cycling, mandated a design for the agriculture that emphasized sustainability and high productivity. The results of the initial 2-year test of the agriculture system showed that it could provide a diet that was both nutritionally adequate and pleasing to the palate of the eight-member crew from September 1991 to September 1993. The agriculture design was developed from 1985 to 1991 at the Space Biospheres research greenhouses with consulting from the Institute of Ecotechnics (London) from its experiments in New Mexico, Australia, and France and the Environmental Research Laboratory (University of Arizona). During the 2-year mission this research was continued with the close collaboration of outside scientific consultants, particularly in the area of soil management and integrated pest management. The 2000-m2 cropping area provided approximately 81% of the overall nutritional needs of the crew. Initial results showed light to be the main limiting factor and the additional electric light was added after the first 2-year mission to increase the productivity for future experiments. The diet was primarily vegetarian supplemented with daily amounts of milk, and weekly meals of meat and eggs from the system's domestic goats, pigs, and chickens. Nontoxic methods of pest and disease control were used. The main pest problems were broad mite and root knot nematode. Inedible plant material, domestic animal wastes, and human waste water were successfully processed for nutrient return to the soil. Eighty-six varieties of crops were grown in Biosphere 2. Major staple crops included rice, sweet potato, beets, banana, and papaya. The African pygmy goats were the most productive of the domestic animals producing on average 1.14 kg of milk per day. The diet averaged 2200 calories, 73 g of protein, and 32 g of fat per person per day over the 2 years. The crew had a 10

Biosphere data base revision

International Nuclear Information System (INIS)

Bergstroem, U.; Andersson, K.; Sundblad, B.

1985-12-01

The turnover of long-lived radionuclides in the biosphere has been modelled some time ago and the exposure to man was calculated. The nuclides were long-lived actinides and fission products leaking from a simulated deep rock repository for spent nuclear fuel. The data base for these calculations has been updated in the present work and in addition a number of nuclides that were not included in the earlier work have been treated. (G.B.)

The biosphere today and tomorrow in the SFR area

Energy Technology Data Exchange (ETDEWEB)

Kautsky, Ulrik (ed.)

2001-06-01

This report is a compilation of the work done mainly in the SAFE project for the biosphere from about 14 reports. The SAFE project is the updated safety analysis of SFR-1, the LLW and ILW repository at Forsmark. The aim of the report is to summarize the available information about the present-day biosphere in the area surrounding SFR and to use this information, together with information about the previous development of the biosphere, to predict the future development of the area in a more comparable way than the underlying reports. The data actually used for the models have been taken from the original reports which also justify or validate the data. The report compiles information about climate, oceanography, landscape, sedimentation, shoreline displacement, marine, lake and terrestrial ecosystems.

The biosphere today and tomorrow in the SFR area

International Nuclear Information System (INIS)

Kautsky, Ulrik

2001-06-01

This report is a compilation of the work done mainly in the SAFE project for the biosphere from about 14 reports. The SAFE project is the updated safety analysis of SFR-1, the LLW and ILW repository at Forsmark. The aim of the report is to summarize the available information about the present-day biosphere in the area surrounding SFR and to use this information, together with information about the previous development of the biosphere, to predict the future development of the area in a more comparable way than the underlying reports. The data actually used for the models have been taken from the original reports which also justify or validate the data. The report compiles information about climate, oceanography, landscape, sedimentation, shoreline displacement, marine, lake and terrestrial ecosystems

Toward Reducing Uncertainties in Biospheric Carbon Uptake in the American West: An Atmospheric Perspective

Science.gov (United States)

Lin, J. C.; Stephens, B. B.; Mallia, D.; Wu, D.; Jacobson, A. R.

2015-12-01

Despite the need for an understanding of terrestrial biospheric carbon fluxes to account for carbon cycle feedbacks and predict future CO2 concentrations, knowledge of such fluxes at the regional scale remains poor. This is particularly true in mountainous areas, where lack of observations combined with difficulties in their interpretation lead to significant uncertainties. Yet mountainous regions are also where significant forest cover and biomass are found—areas that have the potential to serve as carbon sinks. In particular, understanding carbon fluxes in the American West is of critical importance for the U.S. carbon budget, as the large area and biomass indicate potential for carbon sequestration. However, disturbances such as drought, insect outbreak, and wildfires in this region can introduce significant perturbations to the carbon cycle and thereby affect the amount of carbon sequestered by vegetation in the Rockies. To date, there have been few atmospheric CO2 observations in the American Rockies due to a combination of difficulties associated with logistics and interpretation of the measurements in the midst of complex terrain. Among the few sites are those associated with NCAR's Regional Atmospheric Continuous CO2 Network in the Rocky Mountains (Rocky RACCOON). As CO2 observations in mountainous areas increase in the future, it is imperative that they can be properly interpreted to yield information about biospheric carbon fluxes. In this paper, we will present CO2 observations from RACCOON, along with atmospheric simulations that attempt to extract information about biospheric carbon fluxes in the Western U.S. from these observations. We show that atmospheric models can significantly misinterpret the CO2 observations, leading to large errors in the retrieved biospheric fluxes, due to erroneous atmospheric flows. Recommendations for ways to minimize such errors and properly link the CO2 concentrations to biospheric fluxes are discussed.

Genetic dissection of powdery mildew resistance in interspecific half-sib grapevine families using SNP-based maps.

Science.gov (United States)

Teh, Soon Li; Fresnedo-Ramírez, Jonathan; Clark, Matthew D; Gadoury, David M; Sun, Qi; Cadle-Davidson, Lance; Luby, James J

2017-01-01

Quantitative trait locus (QTL) identification in perennial fruit crops is impeded largely by their lengthy generation time, resulting in costly and labor-intensive maintenance of breeding programs. In a grapevine (genus Vitis ) breeding program, although experimental families are typically unreplicated, the genetic backgrounds may contain similar progenitors previously selected due to their contribution of favorable alleles. In this study, we investigated the utility of joint QTL identification provided by analyzing half-sib families. The genetic control of powdery mildew was studied using two half-sib F 1 families, namely GE0711/1009 (MN1264 × MN1214; N  = 147) and GE1025 (MN1264 × MN1246; N  = 125) with multiple species in their ancestry. Maternal genetic maps consisting of 1077 and 1641 single nucleotide polymorphism (SNP) markers, respectively, were constructed using a pseudo-testcross strategy. Ratings of field resistance to powdery mildew were obtained based on whole-plant evaluation of disease severity. This 2-year analysis uncovered two QTLs that were validated on a consensus map in these half-sib families with improved precision relative to the parental maps. Examination of haplotype combinations based on the two QTL regions identified strong association of haplotypes inherited from 'Seyval blanc', through MN1264, with powdery mildew resistance. This investigation also encompassed the use of microsatellite markers to establish a correlation between 206-bp (UDV-015b) and 357-bp (VViv67) fragment sizes with resistance-carrying haplotypes. Our work is one of the first reports in grapevine demonstrating the use of SNP-based maps and haplotypes for QTL identification and tagging of powdery mildew resistance in half-sib families.

Review of geosphere-biosphere interface processes and their handling in the safety case of Posiva

International Nuclear Information System (INIS)

Lahdenperae, A.-M.

2006-12-01

The report describes list of databases of the Features, Events and Processes (FEPs) on the basis of the current knowledge and ranks them for their potential importance of radionuclide transport in the Safety Case. Due to vast amount of FEPs, only those assessed as potentially significant for the geosphere-biosphere interface zone (GBIZ) are described in detail. However, for scientific understanding also general main FEPs in the GBIZ are incorporated whether they affect directly radionuclide transport or not. The geosphere-biosphere interface zone, or the boundaries between the geosphere and biosphere modelling domains of the safety assessment, has been raised to an important issue but, according to the reports, it has so far taken into account rather poorly or not at all. Thus, it is acknowledged that a genuine site-specific treatment and incorporation of (deeper) overburden and aquifers into the biosphere models are needed to cover all relevant FEPs and to treat properly the zone in the modeling chain of groundwater flow and geosphere and biosphere transport of radionuclides. The principal variability in the GBIZ, especially in the biosphere, is driven by climatic change. The change from bedrock groundwater to bioavailable region takes place without gaps in the top bedrock to the overburden. However, it is important to recognise that there are regions in GBIZ that overlap the geosphere and biosphere model domains problems envisaged with the treatment of the GBIZ are associated with defining the boundary conditions for both far field and biosphere models. The GBIZ is not a separate modelling domain and the processes and events affecting the transport of radionuclides within the GBIZ should not be considered to be unidirectional. The biosphere is a diverse system under continuous development and impossible to model accurately. Thus, some inherent uncertainty already in the conceptual level of modelling has to be accepted. In addition of needs to handle spatial and

The Earth's Biosphere

Science.gov (United States)

2002-01-01

In the last five years, scientists have been able to monitor our changing planet in ways never before possible. The Sea-viewing Wide Field-of-View Sensor (SeaWiFS), aboard the OrbView-2 satellite, has given researchers an unprecedented view of the biological engine that drives life on Earth-the countless forms of plants that cover the land and fill the oceans. 'There is no question the Earth is changing. SeaWiFS has enabled us, for the first time, to monitor the biological consequences of that change-to see how the things we do, as well as natural variability, affect the Earth's ability to support life,' said Gene Carl Feldman, SeaWiFS project manager at NASA's Goddard Space Flight Center, Greenbelt, Md. SeaWiFS data, based on continuous daily global observations, have helped scientists make a more accurate assessment of the oceans' role in the global carbon cycle. The data provide a key parameter in a number of ecological and environmental studies as well as global climate-change modeling. The images of the Earth's changing land, ocean and atmosphere from SeaWiFS have documented many previously unrecognized phenomena. The image above shows the global biosphere from June 2002 measured by SeaWiFS. Data in the oceans is chlorophyll concentration, a measure of the amount of phytoplankton (microscopic plants) living in the ocean. On land SeaWiFS measures Normalized Difference Vegetation Index, an indication of the density of plant growth. For more information and images, read: SeaWiFS Sensor Marks Five Years Documenting Earth'S Dynamic Biosphere Image courtesy SeaWiFS project and copyright Orbimage.

A new plan quality index for nasopharyngeal cancer SIB IMRT.

Science.gov (United States)

Jin, X; Yi, J; Zhou, Y; Yan, H; Han, C; Xie, C

2014-02-01

A new plan quality index integrating dosimetric and radiobiological indices was proposed to facilitate the evaluation and comparison of simultaneous integrated boost (SIB) intensity modulated radiotherapy (IMRT) plans for nasopharyngeal cancer (NPC) patients. Ten NPC patients treated by SIB-IMRT were enrolled in the study. Custom software was developed to read dose-volume histogram (DVH) curves from the treatment planning system (TPS). A plan filtering matrix was introduced to filter plans that fail to satisfy treatment protocol. Target plan quality indices and organ at risk (OAR) plan quality indices were calculated for qualified plans. A unique composite plan quality index (CPQI) was proposed based on the relative weight of these indices to evaluate and compare competing plans. Plan ranking results were compared with detailed statistical analysis, radiation oncology quality system (ROQS) scoring results and physician's evaluation results to verify the accuracy of this new plan quality index. The average CPQI values for plans with OAR priority of low, normal, high, and PTV only were 0.22 ± 0.08, 0.49 ± 0.077, 0.71 ± 0.062, and -0.21 ± 0.16, respectively. There were significant differences among these plan quality indices (One-way ANOVA test, p plans were selected. Plan filtering matrix was able to speed up the plan evaluation process. The new matrix plan quality index CPQI showed good consistence with physician ranking results. It is a promising index for NPC SIB-IMRT plan evaluation. Copyright © 2013 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

The biomass theme 1 project: Reference biospheres

International Nuclear Information System (INIS)

Crossland, I.; Torres-Vidal, C.

2000-01-01

The long-term safety of a facility for the disposal of long-lived radioactive waste would principally depend upon a combination of engineered and natural barriers which would ensure that the radioactivity was prevented from reaching the biosphere. To assess radiological safety over extended timescales requires the construction of 'assessment biospheres'. A possibility is the development of 'Reference Biospheres', a series of stylised, internationally-agreed assessment biospheres that could be used to support post-closure assessments in a wide variety of situations. Current activities in this subject area are described. (author)

The disposal of Canada's nuclear fuel waste: the biosphere model, BIOTRAC, for postclosure assessment

International Nuclear Information System (INIS)

Davis, P.A.; Zach, R.; Stephens, M.E.; Amiro, B.D.; Bird, G.A.; Reid, J.A.K.; Sheppard, M.I.; Sheppard, S.C.; Stephenson, M.

1993-01-01

The nuclear fuel waste management concept of Canada calls for disposal of the waste in a vault mined deep in plutonic rock of the Canadian Shield. The technical feasibility of this concept, and its impact on the environment and human health, will be documented in an Environmental Impact statement (EIS) by AECL. The present report is one of nine EIS primary references. The report describes the BIOTRAC model, which is used to trace nuclide movement from the geosphere through the biosphere and to calculate time-dependent environmental concentrations and radiological doses to humans and other biota for the postclosure phase. These concentrations and doses are crucial for evaluating the safety and environmental acceptability of the concept in terms of chemical and radiological toxicity. BIOTRAC was developed specifically to assess the impacts of a used-fuel disposal vault. It is a comprehensive, generic model with distributed or probabilistic parameter values to account for spatial and temporal variability and uncertainty. It is composed of four separate but closely linked submodels representing surface waters, soils, the atmosphere and the food chain. It also includes a unique model for predicting radiological doses to non-human biota, represented by generic target organisms. The mathematical formulation of each submodel is derived in detail and interpreted physically, and all the assumptions are fully evaluated and discussed. It is shown how the parameter values and distributions adopted for each submodel are derived from the available data. The interfaces between the submodels, and between BIOTRAC and the geosphere model, are presented in detail. Fluctuations in the physical state of the biosphere are accounted for through the parameter distributions. Major environmental changes, such as those caused by continental glaciation, are addressed quantitatively and through reasoned arguments, which indicate that radiological doses to humans will not increase suddenly or

Biospheres and solar system exploration

Science.gov (United States)

Paine, Thomas O.

1990-01-01

The implications of biosphere technology is briefly examined. The exploration status and prospects of each world in the solar system is briefly reviewed, including the asteroid belt, the moon, and comets. Five program elements are listed as particularly critical for future interplanetary operations during the coming extraterrestrial century. They include the following: (1) a highway to Space (earth orbits); (2) Orbital Spaceports to support spacecraft assembly, storage, repair, maintenance, refueling, launch, and recovery; (3) a Bridge Between Worlds to transport cargo and crews to the moon and beyond to Mars; (4) Prospecting and Resource Utilization Systems to map and characterize the resources of planets, moons, and asteroids; and (5) Closed Ecology Biospheres. The progress in these five field is reviewed.

Probabilistic calculations and sensitivity analysis of parameters for a reference biosphere model assessing the potential exposure of a population to radionuclides from a deep geological repository

Energy Technology Data Exchange (ETDEWEB)

Staudt, Christian; Kaiser, Jan Christian [Helmholtz Zentrum Muenchen, Institute of Radiation Protection, Munich (Germany); Proehl, Gerhard [International Atomic Energy Agency, Division of Radiation, Transport and Waste Safety, Wagramerstrasse 5, 1400 Vienna (Austria)

2014-07-01

Radioecological models are used to assess the exposure of hypothetical populations to radionuclides. Potential radionuclide sources are deep geological repositories for high level radioactive waste. Assessment time frames are long since releases from those repositories are only expected in the far future, and radionuclide migration to the geosphere biosphere interface will take additional time. Due to the long time frames, climate conditions at the repository site will change, leading to changing exposure pathways and model parameters. To identify climate dependent changes in exposure in the far field of a deep geological repository a range of reference biosphere models representing climate analogues for potential future climate states at a German site were developed. In this approach, model scenarios are developed for different contemporary climate states. It is assumed that the exposure pathways and parameters of the contemporary biosphere in the far field of the repository will change to be similar to those at the analogue sites. Since current climate models cannot predict climate developments over the assessment time frame of 1 million years, analogues for a range of realistically possible future climate conditions were selected. These climate states range from steppe to permafrost climate. As model endpoint Biosphere Dose conversion factors (BDCF) are calculated. The radionuclide specific BDCF describe the exposure of a population to radionuclides entering the biosphere in near surface ground water. The BDCF are subject to uncertainties in the exposure pathways and model parameters. In the presented work, probabilistic and sensitivity analysis was used to assess the influence of model parameter uncertainties on the BDCF and the relevance of individual parameters for the model result. This was done for the long half-live radionuclides Cs-135, I-129 and U-238. In addition to this, BDCF distributions for nine climate reference regions and several scenarios were

Community Assembly Processes of the Microbial Rare Biosphere.

Science.gov (United States)

Jia, Xiu; Dini-Andreote, Francisco; Falcão Salles, Joana

2018-03-14

Our planet teems with microorganisms that often present a skewed abundance distribution in a local community, with relatively few dominant species coexisting alongside a high number of rare species. Recent studies have demonstrated that these rare taxa serve as limitless reservoirs of genetic diversity, and perform disproportionate types of functions despite their low abundances. However, relatively little is known about the mechanisms controlling rarity and the processes promoting the development of the rare biosphere. Here, we propose the use of multivariate cut-offs to estimate rare species and phylogenetic null models applied to predefined rare taxa to disentangle the relative influences of ecoevolutionary processes mediating the assembly of the rare biosphere. Importantly, the identification of the factors controlling rare species assemblages is critical for understanding the types of rarity, how the rare biosphere is established, and how rare microorganisms fluctuate over spatiotemporal scales, thus enabling prospective predictions of ecosystem responses. Copyright © 2018 Elsevier Ltd. All rights reserved.

Safety case for the disposal of spent nuclear fuel at Olkiluoto. Terrain and ecosystems development modelling in the biosphere assessment BSA-2012

International Nuclear Information System (INIS)

2013-12-01

This report is one of the four supporting reports for the three main biosphere reports in the safety case for the disposal of spent nuclear fuel at Olkiluoto, 'TURVA-2012'. The focus of this report is to detail the scenario analysis of terrain and ecosystems development at the Olkiluoto repository site within a time frame of 10 000 years, whereas the input data to this modelling is detailed in the Data Basis report. The results are used further especially in the surface and near-surface hydrological modelling and in the biosphere radionuclide transport and dose modelling, both part of the biosphere assessment 'BSA-2012' feeding into the safety case. Based on the results of the 18 cases simulated in the scenario analysis, it can be outlined that the most significant differences in respect of the dose implications of the repository arise from the inputs and settings affecting the rate of coastline retreat (i.e. land uplift and sea level) and determining whether there are croplands or not in the area. (orig.)

The Biosphere as a Living System. On Peculiarities of the Evolutionary Process on the Biosphere Level

Directory of Open Access Journals (Sweden)

Alexej Yablokov

2016-10-01

Full Text Available The main purpose of this second essay the “biospherology” is to streamline and formalize the existing knowledge about the biosphere, to develop the theoretical basis of the theory of evolution of the biosphere. Despite the vast amount of research on ways of origin and development of life, yet there is no generally accepted theory of evolution of life on Earth, which would not only contain the phenomenology of this process, but also an understanding of the mechanism of functioning of the biosphere as a self-regulating living organism. In the first essay, the necessity of such an understanding to preserve life-supporting functions of the biosphere under increasing anthropogenic pressure. As solution it has been proposed in the form of transition to the managed (controlled evolution of the biosphere – to process of maintenance of life-supporting ability of the biosphere by management of Humankind activity. This essay is an attempt to create a consistent picture of the structure and functioning of the Earth life, the main achievements of the evolution of life, led to the almost completely closed (to the Anthropocene self-sustaining biosphere cycling of substance and energy, the growth of "sum of life" and evolve the social form of matter from biological one. The proposed view of the multidimensional picture of life on Earth consists of the determination of necessary and sufficient properties of a life matter, formulate functioning principles of the life, and determind of the different levels of organization of life. Among the main features of living: discreetness, integritiness, self-reproducibility, dissymmetriness, cooperativeness, mortality, orderness, energy saturation, informational content. Among the main principles of the functioning of the life: the unity of the biological structure (phenotype and the program for its construction (genotype, transmitted in generations; matrix way of transmission of the programs of development

Transbios - a unified model for assessment of the effect of noxious materials in ground water to the biosphere. Compilation of the model

International Nuclear Information System (INIS)

Rejlek, G.

1992-06-01

This model of radionuclide propagation in the biosphere is part of the project 'Final Deposition of Low- and Medium- active Wastes from Hospitals, University Institutes and Industry'. The six parts are: a flow-and transport model in ground water, an evaporation-transpiration model, a transfer model soil-to-plant, a water cycle- and a food chain model. Solutions are designed and peculiarities of the program are outlined. Finally the individual parts are integrated into the overall model

Radionuclide transport and dose assessment modelling in biosphere assessment 2009

International Nuclear Information System (INIS)

Hjerpe, T.; Broed, R.

2010-11-01

Following the guidelines set forth by the Ministry of Trade and Industry (now Ministry of Employment and Economy), Posiva is preparing to submit a construction license application for the final disposal spent nuclear fuel at the Olkiluoto site, Finland, by the end of the year 2012. Disposal will take place in a geological repository implemented according to the KBS-3 method. The long-term safety section supporting the license application will be based on a safety case that, according to the internationally adopted definition, will be a compilation of the evidence, analyses and arguments that quantify and substantiate the safety and the level of expert confidence in the safety of the planned repository. This report documents in detail the conceptual and mathematical models and key data used in the landscape model set-up, radionuclide transport modelling, and radiological consequences analysis applied in the 2009 biosphere assessment. Resulting environmental activity concentrations in landscape model due to constant unit geosphere release rates, and the corresponding annual doses, are also calculated and presented in this report. This provides the basis for understanding the behaviour of the applied landscape model and subsequent dose calculations. (orig.)

Radioactive iodine waste. 8. Biosphere assessment of I-129 released to deep marine seabed

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

1999-01-01

Biosphere model for I-129 repository constructed under coastal seabed was developed in this study. The result showed that dose conversion factor for the repository was much less than that of biosphere model which was developed for the river discharge case. This was due to the much amount of dilution by seawater and limited exposure pathway.(author)

In Depth Modeling of Nuclide Transport in the Geosphere and the Biosphere to Reduce Uncertainty (Final Report)

International Nuclear Information System (INIS)

Lee, Youn Myoung; Kang, Chul Kyung; Hwang, Yong Soo; Lee, Sung Ho

2010-08-01

The Korea Radioactive Waste Management Center (KRMC) is conducting a research on a step by step development of a safety case for the Gyeongju low- and intermediate-level radioactive waste repository (WNEMC; Wolseong Nuclear Environment Management Center). A modeling study and development of a methodology, by which an assessment of safety and performance for a low- and intermediate level radioactive waste (LILW) repository could be effectively made has been carried out. With normal or abnormal nuclide release cases associated with the various FEPs and scenarios involved in the performance of the proposed repository in view of nuclide transport and transfer both in geosphere and biosphere, a total system performance assessment (TSPA) program has been developed by utilizing such commercial development tool programs as GoldSim, AMBER, MASCOT-K, and TOUGH2 in Korea Atomic Energy Research Institute (KAERI) under contract with KRMC. The final project report especially deals much with a detailed conceptual modeling scheme by which a GoldSim program modules, all of which are integrated into a TSPA program template kit as well as the input data set currently available. In-depth system models that are conceptually and rather practically described and then ready for implementing into a GoldSim TSPA program are introduced with plenty of illustrative conceptual schemes and evaluations with data currently available. The GoldSim TSPA tempalte program and the AMBER biosphere tempalte program as well as the TOUGH-2 gas migration template program developed through this project are expected to be successfully applied to the post closure safety assessment required for WNEMC by the regulatory body with increased practicality and much reduced uncertainty and conservatism

Energy flows of the biosphere

Energy Technology Data Exchange (ETDEWEB)

Gorshkov, V.G.

1980-01-01

Mankind consumes more than 90% of the animal production of the world. The locking of a significant part of the biosphere energy flow onto the anthropogenic chain leads to the dislodging of natural forms of organisms of the biosphere, change of its functioning and self-regulation. For the maintenance of stable existence of a small set of cultivated plants and domestic animals not forming the complete set indispensable for reaction to the change of natural conditions, man is compelled to follow the path of auxiliary investments of energy and to compensate for the destruction of closed circulations of food substances by the flow of fertilizers extracted from natural deposits. Energy assessments show the lack of realism of many projects for increasing the global energy flow in the anthropogenic channel by increasing the full flow of energy of the biosphere. To obtain the net production of the contemporary plowed field in hotbed on the basis of hydroponics there is required 2 x 10/sup 14/ watts of additional energy. To provide for the inflow of such an amount of energy (and also vast volumes of fresh water) presents extremely complicated problems. According to the author's calculations, in a provisional conversion of all production of green plants, all gas and petroleum and edible food with an efficiency equal to 1%, it is possible to provide food reserves equal to one annual harvest of the plowed fields of the world of 2 x 10/sup 9/ tons.

Lignocellulose deconstruction in the biosphere

Energy Technology Data Exchange (ETDEWEB)

Bomble, Yannick J.; Lin, Chien-Yuan; Amore, Antonella; Wei, Hui; Holwerda, Evert K.; Ciesielski, Peter N.; Donohoe, Bryon S.; Decker, Stephen R.; Lynd, Lee R.; Himmel, Michael E.

2017-12-01

Microorganisms have evolved different and yet complementary mechanisms to degrade biomass in the biosphere. The chemical biology of lignocellulose deconstruction is a complex and intricate process that appears to vary in response to specific ecosystems. These microorganisms rely on simple to complex arrangements of glycoside hydrolases to conduct most of these polysaccharide depolymerization reactions and also, as discovered more recently, oxidative mechanisms via lytic polysaccharide monooxygenases or non-enzymatic Fenton reactions which are used to enhance deconstruction. It is now clear that these deconstruction mechanisms are often more efficient in the presence of the microorganisms. In general, a major fraction of the total plant biomass deconstruction in the biosphere results from the action of various microorganisms, primarily aerobic bacteria and fungi, as well as a variety of anaerobic bacteria. Beyond carbon recycling, specialized microorganisms interact with plants to manage nitrogen in the biosphere. Understanding the interplay between these organisms within or across ecosystems is crucial to further our grasp of chemical recycling in the biosphere and also enables optimization of the burgeoning plant-based bioeconomy.

Lignocellulose deconstruction in the biosphere.

Science.gov (United States)

Bomble, Yannick J; Lin, Chien-Yuan; Amore, Antonella; Wei, Hui; Holwerda, Evert K; Ciesielski, Peter N; Donohoe, Bryon S; Decker, Stephen R; Lynd, Lee R; Himmel, Michael E

2017-12-01

Microorganisms have evolved different and yet complementary mechanisms to degrade biomass in the biosphere. The chemical biology of lignocellulose deconstruction is a complex and intricate process that appears to vary in response to specific ecosystems. These microorganisms rely on simple to complex arrangements of glycoside hydrolases to conduct most of these polysaccharide depolymerization reactions and also, as discovered more recently, oxidative mechanisms via lytic polysaccharide monooxygenases or non-enzymatic Fenton reactions which are used to enhance deconstruction. It is now clear that these deconstruction mechanisms are often more efficient in the presence of the microorganisms. In general, a major fraction of the total plant biomass deconstruction in the biosphere results from the action of various microorganisms, primarily aerobic bacteria and fungi, as well as a variety of anaerobic bacteria. Beyond carbon recycling, specialized microorganisms interact with plants to manage nitrogen in the biosphere. Understanding the interplay between these organisms within or across ecosystems is crucial to further our grasp of chemical recycling in the biosphere and also enables optimization of the burgeoning plant-based bioeconomy. Copyright © 2017. Published by Elsevier Ltd.

Quantifying the influence of the terrestrial biosphere on glacial-interglacial climate dynamics

Science.gov (United States)

Davies-Barnard, Taraka; Ridgwell, Andy; Singarayer, Joy; Valdes, Paul

2017-10-01

The terrestrial biosphere is thought to be a key component in the climatic variability seen in the palaeo-record. It has a direct impact on surface temperature through changes in surface albedo and evapotranspiration (so-called biogeophysical effects) and, in addition, has an important indirect effect through changes in vegetation and soil carbon storage (biogeochemical effects) and hence modulates the concentrations of greenhouse gases in the atmosphere. The biogeochemical and biogeophysical effects generally have opposite signs, meaning that the terrestrial biosphere could potentially have played only a very minor role in the dynamics of the glacial-interglacial cycles of the late Quaternary. Here we use a fully coupled dynamic atmosphere-ocean-vegetation general circulation model (GCM) to generate a set of 62 equilibrium simulations spanning the last 120 kyr. The analysis of these simulations elucidates the relative importance of the biogeophysical versus biogeochemical terrestrial biosphere interactions with climate. We find that the biogeophysical effects of vegetation account for up to an additional -0.91 °C global mean cooling, with regional cooling as large as -5 °C, but with considerable variability across the glacial-interglacial cycle. By comparison, while opposite in sign, our model estimates of the biogeochemical impacts are substantially smaller in magnitude. Offline simulations show a maximum of +0.33 °C warming due to an increase of 25 ppm above our (pre-industrial) baseline atmospheric CO2 mixing ratio. In contrast to shorter (century) timescale projections of future terrestrial biosphere response where direct and indirect responses may at times cancel out, we find that the biogeophysical effects consistently and strongly dominate the biogeochemical effect over the inter-glacial cycle. On average across the period, the terrestrial biosphere has a -0.26 °C effect on temperature, with -0.58 °C at the Last Glacial Maximum. Depending on

Quantifying the influence of the terrestrial biosphere on glacial–interglacial climate dynamics

Directory of Open Access Journals (Sweden)

T. Davies-Barnard

2017-10-01

Full Text Available The terrestrial biosphere is thought to be a key component in the climatic variability seen in the palaeo-record. It has a direct impact on surface temperature through changes in surface albedo and evapotranspiration (so-called biogeophysical effects and, in addition, has an important indirect effect through changes in vegetation and soil carbon storage (biogeochemical effects and hence modulates the concentrations of greenhouse gases in the atmosphere. The biogeochemical and biogeophysical effects generally have opposite signs, meaning that the terrestrial biosphere could potentially have played only a very minor role in the dynamics of the glacial–interglacial cycles of the late Quaternary. Here we use a fully coupled dynamic atmosphere–ocean–vegetation general circulation model (GCM to generate a set of 62 equilibrium simulations spanning the last 120 kyr. The analysis of these simulations elucidates the relative importance of the biogeophysical versus biogeochemical terrestrial biosphere interactions with climate. We find that the biogeophysical effects of vegetation account for up to an additional −0.91 °C global mean cooling, with regional cooling as large as −5 °C, but with considerable variability across the glacial–interglacial cycle. By comparison, while opposite in sign, our model estimates of the biogeochemical impacts are substantially smaller in magnitude. Offline simulations show a maximum of +0.33 °C warming due to an increase of 25 ppm above our (pre-industrial baseline atmospheric CO2 mixing ratio. In contrast to shorter (century timescale projections of future terrestrial biosphere response where direct and indirect responses may at times cancel out, we find that the biogeophysical effects consistently and strongly dominate the biogeochemical effect over the inter-glacial cycle. On average across the period, the terrestrial biosphere has a −0.26 °C effect on temperature, with −0.58 °C at the

Normative studies with the Scale for Interpersonal Behaviour (SIB) : II. US students - A cross-cultural comparison with Dutch data

NARCIS (Netherlands)

Arrindell, WA; Bridges, KR; van der Ende, J; Lawrence, JSS; Gray-Shellberg, L; Harnish, R; Rogers, R; Sanderman, R; Gray, Shellberg L.

2001-01-01

The Scale for Interpersonal Behaviour (SIB), a multidimensional, self-report measure of state assertiveness, was administered to a nationwide sample of 2375 undergraduates enrolled at I I colleges and universities across the USA. The SIB was developed in the Netherlands for the independent

Implications of environmental change for biosphere modelling: work for UK Nirex Ltd

International Nuclear Information System (INIS)

Thorne, M.C.

1990-01-01

Over the timescales of interest in deep geological disposal of radioactive wastes, climate is expected to change radically, with glacial/interglacial cycling anticipated. Climatic conditions and climate change have a influence on the characteristics of the biosphere into which the radionuclides emerge and on the doses to man which may occur. The various factors involved have been taken into account in assessment studies undertaken by the Nirex Disposal Safety Assessment Team. Results from these studies illustrate the major importance of dispersion processes in the biosphere in determining individual radiation doses, and the importance of using self-consistent patterns of human behaviour appropriate to the environment under consideration. 5 refs., 1 tab

The biosphere at Forsmark. Data, assumptions and models used in the SR-Can assessment

International Nuclear Information System (INIS)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern

2006-10-01

This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. The parameters are topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary, e.g. collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis. The report presents descriptions and estimates not presented elsewhere, as well as summaries of important steps in the biosphere modelling that are presented in more detail in separate reports. The intention is to give the reader a coherent description of the steps taken to calculate doses to biota and humans, including a description of the data used, the rationale for a number of assumptions made during parameterisation, and of how the landscape context is applied in the modelling, and also to present the models used and the results obtained

The biosphere at Forsmark. Data, assumptions and models used in the SR-Can assessment

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern [eds.

2006-10-15

This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. The parameters are topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary, e.g. collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis. The report presents descriptions and estimates not presented elsewhere, as well as summaries of important steps in the biosphere modelling that are presented in more detail in separate reports. The intention is to give the reader a coherent description of the steps taken to calculate doses to biota and humans, including a description of the data used, the rationale for a number of assumptions made during parameterisation, and of how the landscape context is applied in the modelling, and also to present the models used and the results obtained.