Good laboratory practices guarantee biosafety in the Sierra Leone-China friendship biosafety laboratory

OpenAIRE

Wang, Qin; Zhou, Wei-Min; Zhang, Yong; Wang, Huan-Yu; Du, Hai-Jun; Nie, Kai; Song, Jing-Dong; Xiao, Kang; Lei, Wen-Wen; Guo, Jian-Qiang; Wei, He-Jiang; Cai, Kun; Wang, Yan-Hai; Wu, Jiang; Kamara, Gerard

2016-01-01

Background The outbreak of Ebola virus disease (EVD) in West Africa between 2014 and 2015 was the largest EDV epidemic since the identification of Ebola virus (EBOV) in 1976, and the countries most strongly affected were Sierra Leone, Guinea, and Liberia. Findings The Sierra Leone-China Friendship Biological Safety Laboratory (SLE-CHN Biosafety Lab), a fixed Biosafety Level 3 laboratory in the capital city of Sierra Leone, was established by the Chinese government and has been active in EBOV ...

Biosafety in the Laboratory: Prudent Practices for the Handling and Disposal of Infectious Materials

Science.gov (United States)

1989-03-01

psittacosis, lymphogranuloma animal disease diagnostic laboratory). Biosafety Level venereum (LGV), and trachoma are documented APPENDIX A I11 hazards and...127 see also Facilities Lymphogranuloma venereum , 110-111 Laboratory practices academic laboratories, 68-69 M Biosafety Level 1, 90 Biosafety Level

Biosafety and Biosecurity in European Containment Level 3 Laboratories: Focus on French Recent Progress and Essential Requirements

OpenAIRE

Boris Pastorino; Boris Pastorino; Xavier de Lamballerie; Xavier de Lamballerie; Rémi Charrel; Rémi Charrel

2017-01-01

Even if European Union (EU) Member States are obliged to implement EU Directives 2000/54/EC on the protection of workers from risks related to exposure to biological agents at work, national biosafety regulations and practices varied from country to country. In fact, EU legislation on biological agents and genetically modified microorganisms is often not specific enough to ensure harmonization leading to difficulties in implementation for most laboratories. In the same way, biosecurity is a r...

Laboratory biorisk management biosafety and biosecurity

CERN Document Server

Salerno, Reynolds M

2015-01-01

Over the past two decades bioscience facilities worldwide have experienced multiple safety and security incidents, including many notable incidents at so-called ""sophisticated facilities"" in North America and Western Europe. This demonstrates that a system based solely on biosafety levels and security regulations may not be sufficient.Setting the stage for a substantively different approach for managing the risks of working with biological agents in laboratories, Laboratory Biorisk Management: Biosafety and Biosecurity introduces the concept of biorisk management-a new paradigm that encompas

International Society for Analytical Cytology biosafety standard for sorting of unfixed cells.

Science.gov (United States)

Schmid, Ingrid; Lambert, Claude; Ambrozak, David; Marti, Gerald E; Moss, Delynn M; Perfetto, Stephen P

2007-06-01

Cell sorting of viable biological specimens has become very prevalent in laboratories involved in basic and clinical research. As these samples can contain infectious agents, precautions to protect instrument operators and the environment from hazards arising from the use of sorters are paramount. To this end the International Society of Analytical Cytology (ISAC) took a lead in establishing biosafety guidelines for sorting of unfixed cells (Schmid et al., Cytometry 1997;28:99-117). During the time period these recommendations have been available, they have become recognized worldwide as the standard practices and safety precautions for laboratories performing viable cell sorting experiments. However, the field of cytometry has progressed since 1997, and the document requires an update. Initially, suggestions about the document format and content were discussed among members of the ISAC Biosafety Committee and were incorporated into a draft version that was sent to all committee members for review. Comments were collected, carefully considered, and incorporated as appropriate into a draft document that was posted on the ISAC web site to invite comments from the flow cytometry community at large. The revised document was then submitted to ISAC Council for review. Simultaneously, further comments were sought from newly-appointed ISAC Biosafety committee members. This safety standard for performing viable cell sorting experiments was recently generated. The document contains background information on the biohazard potential of sorting and the hazard classification of infectious agents as well as recommendations on (1) sample handling, (2) operator training and personal protection, (3) laboratory design, (4) cell sorter set-up, maintenance, and decontamination, and (5) testing the instrument for the efficiency of aerosol containment. This standard constitutes an updated and expanded revision of the 1997 biosafety guideline document. It is intended to provide

Assessment of biosafety precautions in Khartoum state diagnostic laboratories, Sudan.

Science.gov (United States)

Elduma, Adel Hussein

2012-01-01

This study was conducted to evaluate the biosafety precautions that applied by diagnostic laboratories in Khartoum state, 2009. A total number of 190 laboratories were surveyed about their compliance with standard biosafety precautions. These laboratories included 51 (27%) laboratories from government, 75 (39%) from private sectors and 64 (34%) laboratories belong to organization providing health care services. The study found that 32 (16.8%) of laboratories appointed biosafety officers. Only, ten (5.2%) participated in training about response to fire emergency, and 28 (14.7%) reported the laboratory accident occurred during work. 45 (23.7%) laboratories had a written standard operation procedures (SOPs), and 35 (18.4%) had written procedures for the lean-up of spills. Moreover, biosafety cabinet was found in 11 (5.8%) laboratories, autoclave in 28 (14.7%) and incinerator in only two (1.1%) laboratories. Sharp disposable containers were found in 84 (44.2%). Fire alarm system was found in 2 (1.1%) laboratories, fire extinguisher in 39 (20.5%) laboratories, and fire emergency exit found in 14 (7.4%) laboratories. Furthermore, 19 (10%) laboratories had a hepatitis B virus vaccination programme, 5 (6.2%) applied BCG vaccine, and 2 (1.1%0) vaccinated the staff against influenza. The study concluded that the standards biosafety precautions adopted by the diagnostic laboratories in Khartoum state was very low. Further, the laboratory personnel awareness towards biosafety principles implementation was very low too.

Prospecting for Microelement Function and Biosafety Assessment of Transgenic Cereal Plants

Directory of Open Access Journals (Sweden)

Xiaofen Yu

2018-03-01

Full Text Available Microelement contents and metabolism are vitally important for cereal plant growth and development as well as end-use properties. While minerals phytotoxicity harms plants, microelement deficiency also affects human health. Genetic engineering provides a promising way to solve these problems. As plants vary in abilities to uptake, transport, and accumulate minerals, and the key enzymes acting on that process is primarily presented in this review. Subsequently, microelement function and biosafety assessment of transgenic cereal plants have become a key issue to be addressed. Progress in genetic engineering of cereal plants has been made with the introduction of quality, high-yield, and resistant genes since the first transgenic rice, corn, and wheat were born in 1988, 1990, and 1992, respectively. As the biosafety issue of transgenic cereal plants has now risen to be a top concern, many studies on transgenic biosafety have been carried out. Transgenic cereal biosafety issues mainly include two subjects, environmental friendliness and end-use safety. Different levels of gene confirmation, genomics, proteomics, metabolomics and nutritiomics, absorption, metabolism, and function have been investigated. Also, the different levels of microelement contents have been measured in transgenic plants. Based on the motivation of the requested biosafety, systematic designs, and analysis of transgenic cereal are also presented in this review paper.

Prospecting for Microelement Function and Biosafety Assessment of Transgenic Cereal Plants.

Science.gov (United States)

Yu, Xiaofen; Luo, Qingchen; Huang, Kaixun; Yang, Guangxiao; He, Guangyuan

2018-01-01

Microelement contents and metabolism are vitally important for cereal plant growth and development as well as end-use properties. While minerals phytotoxicity harms plants, microelement deficiency also affects human health. Genetic engineering provides a promising way to solve these problems. As plants vary in abilities to uptake, transport, and accumulate minerals, and the key enzymes acting on that process is primarily presented in this review. Subsequently, microelement function and biosafety assessment of transgenic cereal plants have become a key issue to be addressed. Progress in genetic engineering of cereal plants has been made with the introduction of quality, high-yield, and resistant genes since the first transgenic rice, corn, and wheat were born in 1988, 1990, and 1992, respectively. As the biosafety issue of transgenic cereal plants has now risen to be a top concern, many studies on transgenic biosafety have been carried out. Transgenic cereal biosafety issues mainly include two subjects, environmental friendliness and end-use safety. Different levels of gene confirmation, genomics, proteomics, metabolomics and nutritiomics, absorption, metabolism, and function have been investigated. Also, the different levels of microelement contents have been measured in transgenic plants. Based on the motivation of the requested biosafety, systematic designs, and analysis of transgenic cereal are also presented in this review paper.

Assessment of biosafety precautions in Khartoum state diagnostic ...

African Journals Online (AJOL)

Background: This study was conducted to evaluate the biosafety precautions that applied by diagnostic laboratories in Khartoum state, 2009. Methods: A total number of 190 laboratories were surveyed about ... Sharp disposable containers were found in 84 (44.2%). Fire alarm system was found in 2 (1.1%) laboratories, fire ...

Framework for leadership and training of Biosafety Level 4 laboratory workers.

Science.gov (United States)

Le Duc, James W; Anderson, Kevin; Bloom, Marshall E; Estep, James E; Feldmann, Heinz; Geisbert, Joan B; Geisbert, Thomas W; Hensley, Lisa; Holbrook, Michael; Jahrling, Peter B; Ksiazek, Thomas G; Korch, George; Patterson, Jean; Skvorak, John P; Weingartl, Hana

2008-11-01

Construction of several new Biosafety Level 4 (BSL-4) laboratories and expansion of existing operations have created an increased international demand for well-trained staff and facility leaders. Directors of most North American BSL-4 laboratories met and agreed upon a framework for leadership and training of biocontainment research and operations staff. They agreed on essential preparation and training that includes theoretical consideration of biocontainment principles, practical hands-on training, and mentored on-the-job experiences relevant to positional responsibilities as essential preparation before a person's independent access to a BSL-4 facility. They also agreed that the BSL-4 laboratory director is the key person most responsible for ensuring that staff members are appropriately prepared for BSL-4 operations. Although standardized certification of training does not formally exist, the directors agreed that facility-specific, time-limited documentation to recognize specific skills and experiences of trained persons is needed.

Biosafety Risk Assessment Methodology

Energy Technology Data Exchange (ETDEWEB)

Caskey, Susan Adele [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Gaudioso, Jennifer M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Salerno, Reynolds Mathewson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Wagner, Stefan M. [Public Health Agency of Canada, Winnipeg, MB (Canada). Canadian Science Centre for Human and Animal Health (CSCHAH); Shigematsu, Mika [National Inst. of Infectious Diseases (NIID), Tokyo (Japan); Risi, George [Infectious Disease Specialists, P.C, Missoula, MT (United States); Kozlovac, Joe [US Dept. of Agriculture (USDA)., Beltsville, MD (United States); Halkjaer-Knudsen, Vibeke [Statens Serum Inst., Copenhagen (Denmark); Prat, Esmeralda [Bayer CropScience, Monheim am Rhein (Germany)

2010-10-01

Laboratories that work with biological agents need to manage their safety risks to persons working the laboratories and the human and animal community in the surrounding areas. Biosafety guidance defines a wide variety of biosafety risk mitigation measures, which include measures which fall under the following categories: engineering controls, procedural and administrative controls, and the use of personal protective equipment; the determination of which mitigation measures should be used to address the specific laboratory risks are dependent upon a risk assessment. Ideally, a risk assessment should be conducted in a manner which is standardized and systematic which allows it to be repeatable and comparable. A risk assessment should clearly define the risk being assessed and avoid over complication.

Toward a workable biosafety system for regulating genetically modified organisms in Ethiopia: balancing conservation and competitiveness.

Science.gov (United States)

Abraham, Adane

2013-01-01

On September 9, 2009, Ethiopia enacted a highly restrictive biosafety law firmly based on precautionary principles as a foundation for its GMO regulation system. Its drafting process, led by the country's Environmental Protection Authority, was judged as biased, focusing only on protecting the environment from perceived risks, giving little attention to potential benefits of GMOs. Many of its provisions are very stringent, exceeding those of Cartagena Protocol on Biosafety, while others cannot be fulfilled by applicants, collectively rendering the emerged biosafety system unworkable. These provisions include requirements for advance informed agreement and rigorous socioeconomic assessment in risk evaluation for all GMO transactions, including contained research use-which requires the head of the competent national authority of the exporting country to take full responsibility for GMO-related information provided-and stringent labeling, insurance and monitoring requirements for all GMO activities. Furthermore, there is no provision to establish an independent national biosafety decision-making body(ies). As a result, foreign technology owners that provide highly demanded technologies like Bt cotton declined to work with Ethiopia. There is a fear that the emerged biosafety system might also continue to suppress domestic genetic engineering research and development. Thus, to benefit from GMOs, Ethiopia has to revise its biosafety system, primarily by making changes to some provisions of the law in a way that balances its diverse interests of conserving biodiversity, protecting the environment and enhancing competition in agricultural and other economic sectors.

Genetically modified crops: detection strategies and biosafety issues.

Science.gov (United States)

Kamle, Suchitra; Ali, Sher

2013-06-15

Genetically modified (GM) crops are increasingly gaining acceptance but concurrently consumers' concerns are also increasing. The introduction of Bacillus thuringiensis (Bt) genes into the plants has raised issues related to its risk assessment and biosafety. The International Regulations and the Codex guidelines regulate the biosafety requirements of the GM crops. In addition, these bodies synergize and harmonize the ethical issues related to the release and use of GM products. The labeling of GM crops and their products are mandatory if the genetically modified organism (GMO) content exceeds the levels of a recommended threshold. The new and upcoming GM crops carrying multiple stacked traits likely to be commercialized soon warrant sensitive detection methods both at the DNA and protein levels. Therefore, traceability of the transgene and its protein expression in GM crops is an important issue that needs to be addressed on a priority basis. The advancement in the area of molecular biology has made available several bioanalytical options for the detection of GM crops based on DNA and protein markers. Since the insertion of a gene into the host genome may even cause copy number variation, this may be uncovered using real time PCR. Besides, assessing the exact number of mRNA transcripts of a gene, correlation between the template activity and expressed protein may be established. Here, we present an overview on the production of GM crops, their acceptabilities, detection strategies, biosafety issues and potential impact on society. Further, overall future prospects are also highlighted. Copyright © 2013 Elsevier B.V. All rights reserved.

Biosafety and biosecurity in veterinary laboratories

Energy Technology Data Exchange (ETDEWEB)

Finley, Melissa R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Astuto-Gribble, Lisa M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brass, Van Hildren [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-08-01

Here, with recent outbreaks of MERS-Cov, Anthrax, Nipah, and Highly Pathogenic Avian Influenza, much emphasis has been placed on rapid identification of infectious agents globally. As a result, laboratories are building capacity, conducting more advanced and sophisticated research, increasing laboratory staff, and establishing collections of dangerous pathogens in an attempt to reduce the impact of infectious disease outbreaks and characterize disease causing agents. With this expansion, the global laboratory community has started to focus on laboratory biosafety and biosecurity to prevent the accidental and/or intent ional release o f these agents. Laboratory biosafety and biosecurity systems are used around the world to help mit igate the risks posed by dangerous pathogens in the laboratory. Veterinary laboratories carry unique responsibilities to workers and communities to safely and securely handle disease causing microorganisms. Many microorganisms studied in veterinary laboratories not only infect animals, but also have the potential to infect humans. This paper will discuss the fundamentals of laboratory biosafety and biosecurity.

Integration of Biosafety into Core Facility Management

OpenAIRE

Fontes, Benjamin

2013-01-01

This presentation will discuss the implementation of biosafety policies for small, medium and large core laboratories with primary shared objectives of ensuring the control of biohazards to protect core facility operators and assure conformity with applicable state and federal policies, standards and guidelines. Of paramount importance is the educational process to inform core laboratories of biosafety principles and policies and to illustrate the technology and process pathways of the core l...

Biosafety initiatives in BMENA region: identification of gaps and advances

Directory of Open Access Journals (Sweden)

Erum eKhan

2016-03-01

Full Text Available AbstractIntroduction: The objectives of this study were to identify and assess the impact of capacity-building biosafety initiatives and programs that have taken place in the broader Middle East and north Africa (BMENA region between 2001-13, to highlight gaps that require further development, and to suggest sustainable ways to build cooperative regional biosafety opportunities. Methods: A cross sectional study was conducted with two aspects 1 thorough desktop review of literature for all biosafety / biosecurity related activities in the study countries such as seminars, conferences, workshops, policy documents, technology transfer, sustained scientific endeavours between countries etc.; and 2 an online survey of scientists in countries in the region to get first-hand information about biosafety and biosecurity initiatives and gaps in their country. Results: A total of 1832 initiatives of biosafety / biosecurity were recorded from 97 web-links,70.68% (n=1295 initiatives were focused on raising general awareness among the scientific community about biosafety/biosecurity/biocontainment. The most frequent areas of interest were biorisk management in biomedical and biotechnology laboratories 13% (n=239, followed by Living Modified Organisms (LMO’s 9.17% (n=168. Hands-on training accounted for 2.67% (n=49 of initiatives. On line survey results confirmed desktop review findings, however the response rate was 11%.

Biosafety Initiatives in BMENA Region: Identification of Gaps and Advances.

Science.gov (United States)

Khan, Erum; Ahmed, Nayla; Temsamani, Khalid R; El-Gendy, Atef; Cohen, Murray; Hasan, Ariba; Gastfriend, Hilliard; Cole, Jennifer

2016-01-01

The objectives of this study were to identify and assess the impact of capacity-building biosafety initiatives and programs that have taken place in the broader Middle East and North Africa (BMENA) region between 2001 and 2013, to highlight gaps that require further development, and to suggest sustainable ways to build cooperative regional biosafety opportunities. A cross-sectional study was conducted with two aspects (1) thorough desktop review of literature for all biosafety/biosecurity-related activities in the study countries, such as seminars, conferences, workshops, policy documents, technology transfer, sustained scientific endeavors between countries, etc. and (2) an online survey of scientists in countries in the region to get first-hand information about biosafety and biosecurity initiatives and gaps in their country. A total of 1832 initiatives of biosafety/biosecurity were recorded from 97 web links; 70.68% (n = 1295) initiatives were focused on raising general awareness among the scientific community about biosafety/biosecurity/biocontainment. The most frequent areas of interest were biorisk management in biomedical and biotechnology laboratories 13% (n = 239), followed by living modified organisms (LMOs) 9.17% (n = 168). Hands-on training accounted for 2.67% (n = 49) of initiatives. Online survey results confirmed desktop review findings; however, the response rate was 11%.

Progress and Challenges for Implementation of the Common Market for Eastern and Southern Africa Policy on Biotechnology and Biosafety

Science.gov (United States)

Waithaka, Michael; Belay, Getachew; Kyotalimye, Miriam; Karembu, Margaret

2015-01-01

In 2001, the Meeting of the COMESA Ministers of Agriculture raised concerns that proliferation of genetically modified organisms (GMOs) could impact significantly on trade and food security in the region. This triggered studies on a regional approach to biotechnology and biosafety policy in Eastern and Southern Africa. The studies and stakeholder consultations revealed that farm incomes would increase if they switched from conventional varieties of cotton and maize to genetically modified (GM) counterparts. Commercial risks associated with exports to GM sensitive destinations, e.g., EU were negligible. Intra-regional trade would be affected since exports of GM sensitive commodities, such as maize, cotton, and soya bean, mainly go to other African countries. These findings justified the need to consider a regional approach to biosafety and led to the drafting of a regional policy in 2009. The draft policies were discussed in regional and national workshops between 2010 and 2012 for wider ownership. The workshops involved key stakeholders including ministries of agriculture, trade, environment, national biosafety focal points, biosafety competent authorities, academia, seed traders, millers, the media, food relief agencies, the industry, civil society, competent authorities, and political opinion leaders. The COMESA Council of Ministers in February 2014 adopted the COMESA policy on biotechnology and biosafety that takes into account the sovereign right of each member state. Key provisions of the policy include recognition of the benefits and risks associated with GMOs; establishment of a regional-level biosafety risk-assessment system; national-level final decision, and capacity building assistance to member states. The policies are the first regional effort in Africa to develop a coordinated mechanism for handling biosafety issues related to GMO use. A regional approach to biotechnology and biosafety is expected to foster inter-country cooperation through the

Progress and Challenges for Implementation of the Common Market for Eastern and Southern Africa Policy on Biotechnology and Biosafety.

Science.gov (United States)

Waithaka, Michael; Belay, Getachew; Kyotalimye, Miriam; Karembu, Margaret

2015-01-01

In 2001, the Meeting of the COMESA Ministers of Agriculture raised concerns that proliferation of genetically modified organisms (GMOs) could impact significantly on trade and food security in the region. This triggered studies on a regional approach to biotechnology and biosafety policy in Eastern and Southern Africa. The studies and stakeholder consultations revealed that farm incomes would increase if they switched from conventional varieties of cotton and maize to genetically modified (GM) counterparts. Commercial risks associated with exports to GM sensitive destinations, e.g., EU were negligible. Intra-regional trade would be affected since exports of GM sensitive commodities, such as maize, cotton, and soya bean, mainly go to other African countries. These findings justified the need to consider a regional approach to biosafety and led to the drafting of a regional policy in 2009. The draft policies were discussed in regional and national workshops between 2010 and 2012 for wider ownership. The workshops involved key stakeholders including ministries of agriculture, trade, environment, national biosafety focal points, biosafety competent authorities, academia, seed traders, millers, the media, food relief agencies, the industry, civil society, competent authorities, and political opinion leaders. The COMESA Council of Ministers in February 2014 adopted the COMESA policy on biotechnology and biosafety that takes into account the sovereign right of each member state. Key provisions of the policy include recognition of the benefits and risks associated with GMOs; establishment of a regional-level biosafety risk-assessment system; national-level final decision, and capacity building assistance to member states. The policies are the first regional effort in Africa to develop a coordinated mechanism for handling biosafety issues related to GMO use. A regional approach to biotechnology and biosafety is expected to foster inter-country cooperation through the

Biosafety Education and Training Programs for Ukrainian Microbiologists

International Nuclear Information System (INIS)

Pushkina, V.; Volyansky, A.; Popova, N.

2007-01-01

In the period of the Soviet Union Ukrainian Mechnikov Anti-Plaque Research Institute was one of the main bases of centralized training for laboratory diagnosis of especially dangerous infections. Not only specialists, but medical technicians were obligatory trained. In training programs special attention was paid to the safety regime in accurate work out of practical manipulations in investigational classical methods (cultivating technique, pipeting, animals' infection and dissection, etc.), protective clothes usage, anti-epidemic measures use at different accidents. This approach gave effective results not only in laboratories but also during field work (natural plaque foci investigations, etc.) and at emergencies. Recently in world practice to increase the level of biosafety technical equipment and devices are developed and used very intensively. During training maximal time is paid to their mastering. At such training biosafety practically depends on safe and reliable work of engineer-technical systems. At present in Ukrainian Anti-Plaque Institute with the support of Canadian Government Training Centre on biosafety and biodefense for specialists of Ukraine and FSU countries is being organized. Teaching programs will include complex study of hand manipulations and modern technical means knowledge. To our mind such initial training had to be available for all specialists of BSL 1-2 microbiological laboratories of any subordination. For this goal all kinds of programs will be developed. Such complex approach will promote to decrease biological risks in microbiological laboratories and prevent infectious agents import from working territories.(author)

International Society for the Advancement of Cytometry cell sorter biosafety standards.

Science.gov (United States)

Holmes, Kevin L; Fontes, Benjamin; Hogarth, Philip; Konz, Richard; Monard, Simon; Pletcher, Charles H; Wadley, Robert B; Schmid, Ingrid; Perfetto, Stephen P

2014-05-01

Flow cytometric cell sorting of biological specimens has become prevalent in basic and clinical research laboratories. These specimens may contain known or unknown infectious agents, necessitating precautions to protect instrument operators and the environment from biohazards arising from the use of sorters. To this end the International Society of Analytical Cytology (ISAC) was proactive in establishing biosafety guidelines in 1997 (Schmid et al., Cytometry 1997;28:99-117) and subsequently published revised biosafety standards for cell sorting of unfixed samples in 2007 (Schmid et al., Cytometry Part A J Int Soc Anal Cytol 2007;71A:414-437). Since their publication, these documents have become recognized worldwide as the standard of practice and safety precautions for laboratories performing cell sorting experiments. However, the field of cytometry has progressed since 2007, and the document requires an update. The new Standards provides guidance: (1) for laboratory design for cell sorter laboratories; (2) for the creation of laboratory or instrument specific Standard Operating Procedures (SOP); and (3) on procedures for the safe operation of cell sorters, including personal protective equipment (PPE) and validation of aerosol containment. Published © 2014 Wiley Periodicals Inc.

Laboratory biosafety manual

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

This book is in three sections; basic standards of laboratory design and equipment; procedures for safe laboratory practice; and the selection and use of essential biosafety equipment. The intention is that the guidance given in the book should have a broad basis and international application, and that it should be a source from which manuals applicable to local and special conditions can be usefully derived.

Progress and Challenges for the Implementation of the Common Market for Eastern and Southern Africa (COMESA Policy on Biotechnology and Biosafety

Directory of Open Access Journals (Sweden)

Michael eWaithaka

2015-07-01

Full Text Available In 2001, the Meeting of the COMESA Ministers of Agriculture raised concerns that proliferation of genetically modified organisms (GMOs could impact significantly on trade and food security in the region. This triggered studies on a regional approach to biotechnology and biosafety policy in Eastern and Southern Africa. The studies and stakeholder consultations revealed that farm incomes would increase if they switched from conventional varieties of cotton and maize to GM counterparts. Commercial risks associated with exports to GM sensitive destinations e.g., EU were negligible. Intra-regional trade would be affected since exports of GM sensitive commodities such as maize, cotton and soya bean mainly go to other African countries. These findings justified the need to consider a regional approach to biosafety and led to the drafting of a regional policy in 2009. The draft policies were discussed in regional and national workshops between 2010 and 2012 for wider ownership. The workshops involved key stakeholders including ministries of agriculture, trade, environment, national biosafety focal points, biosafety competent authorities, academia, seed traders, millers, the media, food relief agencies, the industry, civil society, competent authorities and political opinion leaders. The COMESA Council of Ministers in February 2014 adopted the COMESA policy on biotechnology and biosafety that takes into account the sovereign right of each member state. Key provisions of the policy include: recognition both to the benefits and risks associated with GMOs; establishment of regional-level biosafety risk assessment system; national level final decision, and capacity building assistance to member states. The policies are the first regional effort in Africa to develop a coordinated mechanism for handling biosafety issues related to GMO use. Regional approach to biosafety is expected to foster inter-country cooperation through the sharing of knowledge, expertise

Biosafety level-2 laboratory diagnosis of Zaire Ebola virus disease imported from Liberia to Nigeria

Directory of Open Access Journals (Sweden)

Olumuyiwa B. Salu

2016-10-01

Full Text Available Introduction: Global travel is an efficient route of transmission for highly infectious pathogens and increases the chances of such pathogens moving from high disease-endemic areas to new regions. We describe the rapid and safe identification of the first imported case of Ebola virus disease in a traveler to Lagos, Nigeria, using conventional reverse transcription polymerase chain reaction (RT-PCR in a biosafety level (BSL-2 facility. Case presentation: On 20 July 2014, a traveler arrived from Liberia at Lagos International Airport and was admitted to a private hospital in Lagos, with clinical suspicion of Ebola virus disease. Methodology and Outcome: Blood and urine specimens were collected, transported to the Virology Unit Laboratory at the College of Medicine, University of Lagos, and processed under stringent biosafety conditions for viral RNA extraction. RT-PCR was set-up to query the Ebola, Lassa and Dengue fever viruses. Amplicons for pan-filoviruses were detected as 300 bp bands on a 1.5% agarose gel image; there were no detectable bands for Lassa and Dengue viral RNA. Nucleotide BLAST and phylogenetic analysis of sequence data of the RNA-dependent RNA polymerase (L gene confirmed the sequence to be Zaire ebolavirus (EBOV/Hsap/ NGA/2014/LIB-NIG 01072014; Genbank: KM251803.1. Conclusion: Our BSL-2 facility in Lagos, Nigeria, was able to safely detect Ebola virus disease using molecular techniques, supporting the reliability of molecular detection of highly infectious viral pathogens under stringent safety guidelines in BSL-2 laboratories. This is a significant lesson for the many under-facilitated laboratories in resource-limited settings, as is predominantly found in sub-Saharan Africa.

Experiences from the implementation of a biosafety system in Slovenia.

Science.gov (United States)

Milavec, Mojca; Racman, Darja Stanic

2007-09-01

The development and implementation of an effective national biosafety system is important for several key reasons: to ensure safe access to products of modern biotechnology, to build public confidence, to encourage the growth of domestic modern biotechnology, and to comply with international standards and agreements. There is no single best approach in the development and implementation of a national biosafety system and each country is faced with unique challenges. Slovenia is a small country and a new EU Member State. However, it has developed and implemented an efficient national biosafety system. The key elements of this system are administrative procedure, risk assessment, enforcement, and public participation and information.

The Role of Trust Building in the Development of Biosafety Regulations in Kenya - Comment

Directory of Open Access Journals (Sweden)

Justin Mabeya, Peter A. Singer and Obidimma C. Ezezika

2010-09-01

Full Text Available The potential of biotechnology to contribute to the reduction of hunger, malnutrition and poverty in Africa can only be realised with the presence of biosafety legislation. Recently, Kenya enacted the Biosafety Act 2008 after more than six years of stakeholder engagement with farmers, academicians, researchers, members of the community, funders, regulators, and private sector players. In this article, we highlight the challenges and importance of trust among stakeholders in the development and implementation of biosafety legislation in Kenya . We show how open stewardship by government, time investment, consensus building and sustained stakeholder engagement could be key aspects in building trust among stakeholders in the development of national biosafety regulations. Through our analyses of the process of development of Kenya biosafety regulations, we provide a set of guidelines that could help other African countries develop and improve stakeholder trust in developing biosafety regulations.

Biosafety capacity building: experiences and challenges from a distance learning approach.

Science.gov (United States)

Pertry, Ine; Sabbadini, Silvia; Goormachtig, Sofie; Lokko, Yvonne; Gheysen, Godelieve; Burssens, Sylvia; Mezzetti, Bruno

2014-01-25

Biotechnology is revolutionizing industrial and agricultural practice as the number of commercial biotechnology products is increasing each year. Simultaneously, several regulatory approaches are put into place to allow technological advancement while preserving public health and the environment. Developing and/or emerging countries often face major barriers to access biotechnologies and biotechnology derived products as they frequently lack the institutional capacities and professional competence in exercising regulatory oversight. To address this need, intensive biosafety capacity building is required. Different training approaches can be used to train individuals in biosafety ranging from long-term leading to a postgraduate certificate or a Masters degree, to short term courses. In this paper, we discuss the applicability of a different approach to biosafety capacity building based on a distance e-learning system, the UNIDO e-Biosafety program that has been annually organized at the Marche Polytechnic University (MPU) in Italy and Ghent University (UGent) in Belgium since 2006. Even though there are some challenges, we can conclude based on our experience that distance learning in combination with on-campus tuition is amendable for biosafety capacity building. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

Can post-eradication laboratory containment of wild polioviruses be achieved?

Science.gov (United States)

Dowdle, Walter R.; Gary, Howard E.; Sanders, Raymond; van Loon, Anton M.

2002-01-01

The purpose of containment is to prevent reintroduction of wild polioviruses from laboratories into polio-free communities. In order to achieve global commitment to laboratory containment the rationale should be clear and compelling; the biosafety levels should be justified by the risks; and the objectives should be realistic. Absolute containment can never be assured. Questions of intentional or unintentional non-compliance can never be wholly eliminated. Effective laboratory containment is, however, a realistic goal. Prevention of virus transmission through contaminated laboratory materials is addressed by WHO standards for biosafety. The principal challenge is to prevent transmission through unrecognized infectious laboratory workers. Such transmission is possible only if the following conditions occur: infectious and potentially infectious materials carrying wild poliovirus are present in the laboratory concerned; a laboratory operation exposes a worker to poliovirus; a worker is susceptible to an infection that results in the shedding of poliovirus; and the community is susceptible to poliovirus infections. At present it is difficult to envisage the elimination of any of these conditions. However, the risks of the first three can be greatly reduced so as to create a formidable barrier against poliovirus transmission to the community. Final biosafety recommendations must await post-eradication immunization policies adopted by the international community. PMID:12075368

Laboratory biosafety for handling emerging viruses

Directory of Open Access Journals (Sweden)

I. Made Artika

2017-05-01

Full Text Available Emerging viruses are viruses whose occurrence has risen within the past twenty years, or whose presence is likely to increase in the near future. Diseases caused by emerging viruses are a major threat to global public health. In spite of greater awareness of safety and containment procedures, the handling of pathogenic viruses remains a likely source of infection, and mortality, among laboratory workers. There is a steady increase in both the number of laboratories and scientist handling emerging viruses for diagnostics and research. The potential for harm associated to work with these infectious agents can be minimized through the application of sound biosafety concepts and practices. The main factors to the prevention of laboratory-acquired infection are well-trained personnel who are knowledgable and biohazard aware, who are perceptive of the various ways of transmission, and who are professional in safe laboratory practice management. In addition, we should emphasize that appropriate facilities, practices and procedures are to be used by the laboratory workers for the handling of emerging viruses in a safe and secure manner. This review is aimed at providing researchers and laboratory personnel with basic biosafety principles to protect themselves from exposure to emerging viruses while working in the laboratory. This paper focuses on what emerging viruses are, why emerging viruses can cause laboratory-acquired infection, how to assess the risk of working with emerging viruses, and how laboratory-acquired infection can be prevented. Control measures used in the laboratory designed as such that they protect workers from emerging viruses and safeguard the public through the safe disposal of infectious wastes are also addressed.

[Biosafety and biosecurity in the medical laboratory. Update and trends].

Science.gov (United States)

Ionescu, G; Neguţ, M; Combiescu, A A

2007-01-01

Biosafety includes the protective measures against the risks of contamination with pathogen germs in the laboratories that handle pathogens, or stock or manipulate potentially contaminated products, or perform microbiological tests for medical or scientific research purposes, as well as the means of protecting the environment and the human collectivities against hazard contaminations that have as starting point these laboratories. Besides, lately, a new notion emerged, that of biosecurity, which refers to the sum of measures designed to protect workers, environment and population against the loss, theft, use and release in the environment of pathogenic biological agents. The work overviews the present concerns for the regulation of these two notions and the way in which a system for the management of the biological risks in a laboratory that handles pathogens should be documented and implemented. The need for the continuous professional training of the staff and for the establishment of individual and collective responsibilities for preventing biosafety incidents and trespassing biosecurity rules are as well emphasized. The main biosafety measures are pointed out and a series of considerations regarding biosafety and bioterrorism in correlation with the medical laboratory are as well mentioned.

Assessment of biosafety precautions in Khartoum state diagnostic laboratories, Sudan

OpenAIRE

Elduma, Adel Hussein

2012-01-01

Background This study was conducted to evaluate the biosafety precautions that applied by diagnostic laboratories in Khartoum state, 2009. Methods A total number of 190 laboratories were surveyed about their compliance with standard biosafety precautions. These laboratories included 51 (27%) laboratories from government, 75 (39%) from private sectors and 64 (34%) laboratories belong to organization providing health care services. Results The study found that 32 (16.8%) of laboratories appoint...

[Education on biosafety and bioethics: necessary articulation in biotechnology].

Science.gov (United States)

Bonis, Marcos De; Costa, Marco Antonio Ferreira da

2009-01-01

Science education has been discussed in some segments of the society and, international organizations have encouraged nations to invest in this strategic area. In this context, education in bioethics and biosafety explores a rich content on prevention, standards and ethical principles which serve to guide the paths track by biotechnology. The recovery of bioethics and biosafety, as part of an educational policy scientific, effective and consistent, can stimulate the formation of individuals with a scientific and citizen awareness, in a position to participate on ethical and technological issues produced by biotechnology.

State-of-the-Art in Biosafety and Biosecurity in European Countries

OpenAIRE

Bielecka, Anna; Mohammadi, Ali Akbar

2014-01-01

The terms biosafety and biosecurity are widely used in different concepts and refer not only to protection of human beings and their surrounding environment against hazardous biological agent, but also to global disarmament of weapons of mass destruction. As a result, the biosafety and biosecurity issues should be considered interdisciplinary based on multilateral agreements against proliferation of biological weapons, public health and environmental protection. This publication presents info...

Re-Engineering Biosafety Regulations In India: Towards a Critique of Policy, Law and Prescriptions

Directory of Open Access Journals (Sweden)

A. Damodaran

2005-06-01

Full Text Available This article surveys the structure and essence of India’s biosafety regulations from an evolutionary perspective. After detailing the processes associated with the biosafety law and guidelines in the country, this article looks critically at recent efforts to re-engineer the regulations. It is argued that India’s biosafety regulations should move towards a more inclusive approach, which will facilitate transparent and informed decision-making, based on stakeholder-convergence. It is also suggested that the entire spectrum of laws and regulations that have a direct or indirect bearing on biosafety in India, need to be explored so that greater coherence could be secured in the management of biotechnology products that are sensitive to the environment. Drawing from the experience of the Bt cotton case, the article advocates a greater role for civil society and grassroots organizations.

Marburg biosafety and biosecurity scale (MBBS): a framework for risk assessment and risk communication.

Science.gov (United States)

Dickmann, Petra; Apfel, Franklin; Biedenkopf, Nadine; Eickmann, Markus; Becker, Stephan

2015-01-01

Current risk assessment and risk communication of biosafety and biosecurity concerns lack a convenient metric and conceptual framework. The absence of such a systematic tool makes communication more difficult and can lead to ambiguous public perception of and response to laboratory biosafety incidents and biosecurity threats. A new 7-category scoring scale is proposed for incidents and situations in laboratories related to the handling of human and animal pathogens. The scale aims to help clarify risk categories, facilitate coordination and communication, and improve public understanding of risk related to biosafety and biosecurity.

Biosafety regulatory regimes in East and Central Africa

African Journals Online (AJOL)

IDDA

countries covered in this study are Tanzania, Kenya, Uganda, Rwanda, ... A critical look is given to the existing biosafety frameworks, pinpointing their weaknesses and giving suggestions on what could be done to address the shortfalls.

Biosafety Management of Genetically Modified Crops (China) | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Biosafety Management of Genetically Modified Crops (China). Since 1990, China's ... Country(s). China, Far East Asia, Central Asia, South Asia ... Call for new OWSD Fellowships for Early Career Women Scientists now open. In partnership ...

Laboratory-associated infections and biosafety.

OpenAIRE

Sewell, D L

1995-01-01

An estimated 500,000 laboratory workers in the United States are at risk of exposure to infectious agents that cause disease ranging from inapparent to life-threatening infections, but the precise risk to a given worker unknown. The emergence of human immunodeficiency virus and hantavirus, the continuing problem of hepatitis B virus, and the reemergence of Mycobacterium tuberculosis have renewed interest in biosafety for the employees of laboratories and health care facilities. This review ex...

State-of-the-art in biosafety and biosecurity in European countries.

Science.gov (United States)

Bielecka, Anna; Mohammadi, Ali Akbar

2014-06-01

The terms biosafety and biosecurity are widely used in different concepts and refer not only to protection of human beings and their surrounding environment against hazardous biological agent, but also to global disarmament of weapons of mass destruction. As a result, the biosafety and biosecurity issues should be considered interdisciplinary based on multilateral agreements against proliferation of biological weapons, public health and environmental protection. This publication presents information on both, international and national biosafety and biosecurity legislation. Status of national implementation of the Biological and Toxin Weapons Convention, penalization issues and measures to account for and secure production, use, storage of particularly dangerous pathogens or activities involving humans, plants and animals where infection may pose a risk have been analyzed. Safety and security measures in laboratories have been studied. Moreover, dual-use technology and measures of secure transport of biohazard materials have been also taken into account. In addition, genetic engineering regulations, biosecurity activities in laboratories and code of conducts have been investigated, as well.

Biosafety- A Regulatory Primer for DOE/NNSA Sites

Energy Technology Data Exchange (ETDEWEB)

Siegel, Dina Mary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-05-04

The objectives of a biological safety program, and this are to ensure that work with biological materials are conducted in compliance with applicable biosafety standards and ensure that protection of workers, facilities, the public, and the environment.

A Security plan for LMOs - concentrated on environmental policy of Biosafety Protocol

Energy Technology Data Exchange (ETDEWEB)

Park, Yong Ha [Korea Environment Institute, Seoul (Korea)

1998-12-01

Biotechnology industry in Korea is raised by the national support. Also, Korea imports 70% of entire agricultural products. Considering the present situation in Korea, signing a Biosafety Protocol is necessary to prevent harm by LMOs and to protect associated biotechnological industry. Therefore, the problems on signing Biosafety Protocol were analyzed and the environmental policy to be pursued was proposed. This study result will be a cornerstone to prepare a definite environmental policy by government. 54 refs., 7 figs., 27 tabs.

The need for biosafety regulation in developing countries: Benefits ...

African Journals Online (AJOL)

Jane

2011-09-30

Sep 30, 2011 ... Key words: Biotechnology, biosafety, developing countries, benefits, risks and controversies. ... biotechnology concerns relate more to human health and ..... animals in laboratory, when they are tested outdoors, and when they ...

A survey of Asian life scientists :the state of biosciences, laboratory biosecurity, and biosafety in Asia.

Energy Technology Data Exchange (ETDEWEB)

Gaudioso, Jennifer Marie

2006-02-01

Over 300 Asian life scientists were surveyed to provide insight into work with infectious agents. This report provides the reader with a more complete understanding of the current practices employed to study infectious agents by laboratories located in Asian countries--segmented by level of biotechnology sophistication. The respondents have a variety of research objectives and study over 60 different pathogens and toxins. Many of the respondents indicated that their work was hampered by lack of adequate resources and the difficulty of accessing critical resources. The survey results also demonstrate that there appears to be better awareness of laboratory biosafety issues compared to laboratory biosecurity. Perhaps not surprisingly, many of these researchers work with pathogens and toxins under less stringent laboratory biosafety and biosecurity conditions than would be typical for laboratories in the West.

Biosafety regulations in Brazil | Sampaio | African Crop Science ...

African Journals Online (AJOL)

Journal Home > Vol 3, No 3 (1995) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Biosafety regulations in Brazil. MJA Sampaio. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL ...

Thermal inactivation of avian viral and bacterial pathogens in an effluent treatment system within a biosafety level 2 and 3 enhanced facility

Science.gov (United States)

Avian influenza (AI) virus, avian paramyxovirus Type 1 (APMV-1 or Newcastle disease virus [NDV]), reovirus, rotavirus, turkey astrovirus (TAstV), avian metapneumovirus (aMPV), Marek’s disease virus (MDV-1), avian parvovirus (ChPV) and Salmonella enterica serovar Enteritidis are significant biosafety...

[Knowledge and adherence to bio-safety measures and biological accidents by nursing students during their clinical practice].

Science.gov (United States)

Merino-de la Hoz, Felicitas; Durá-Ros, María Jesús; Rodríguez-Martín, Elías; González-Gómez, Silvia; Mariano López-López, Luis; Abajas-Bustillo, Rebeca; de la Horra-Gutiérrez, Inmaculada

2010-01-01

To identify the degree of knowledge and performance of bio-safety measures by nursing students and knowing the type of biological accidents suffered during their clinical practice. A cross-sectional study was conducted on the students of three Nursing courses held in May of 2008. Data was collected by an anonymous self-administered questionnaire, with a return of 54%. A total of 97% of students seemed to know the standard biosafety measures, and all of them (100%) stated that those measures must be applied to every patient. However, the reality of clinical practice shows that biosafety measures are only partially applied. An average of 60.2% implement the personal hygiene measures, 66.1% use physical barriers, and 44% use sharp materials safely. Around 32.25% of the students have suffered some biological accident, with a greater incidence in the second year: administering injections (24%), drawing blood samples with Venojet needles (18%) and recapping used needles (17%). The high level of knowledge shown by the students on standard precautions is not always shown in clinical practice. There are significant deficiencies in student safety practices: recapping of used needles continues to be one of the most common risk practices carried out. Copyright (c) 2009 Elsevier España, S.L. All rights reserved.

Towards a Sustainable Wild Poliovirus Containment Strategy in ...

African Journals Online (AJOL)

Appropriate bio-safety containment and restricted access to stored materials containing WPV at the Virology Laboratory in Lusaka is a major step in the eradication of poliomyelitis in Zambia. Containment of these infectious materials will be particularly important in the post oral polio vaccination cessation era as there will be ...

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 1. Biosafety Level 4 Suit Laboratory Suite Entry and Exit Procedures.

Science.gov (United States)

Janosko, Krisztina; Holbrook, Michael R; Adams, Ricky; Barr, Jason; Bollinger, Laura; Newton, Je T'aime; Ntiforo, Corrie; Coe, Linda; Wada, Jiro; Pusl, Daniela; Jahrling, Peter B; Kuhn, Jens H; Lackemeyer, Matthew G

2016-10-03

Biosafety level 4 (BSL-4) suit laboratories are specifically designed to study high-consequence pathogens for which neither infection prophylaxes nor treatment options exist. The hallmarks of these laboratories are: custom-designed airtight doors, dedicated supply and exhaust airflow systems, a negative-pressure environment, and mandatory use of positive-pressure ("space") suits. The risk for laboratory specialists working with highly pathogenic agents is minimized through rigorous training and adherence to stringent safety protocols and standard operating procedures. Researchers perform the majority of their work in BSL-2 laboratories and switch to BSL-4 suit laboratories when work with a high-consequence pathogen is required. Collaborators and scientists considering BSL-4 projects should be aware of the challenges associated with BSL-4 research both in terms of experimental technical limitations in BSL-4 laboratory space and the increased duration of such experiments. Tasks such as entering and exiting the BSL-4 suit laboratories are considerably more complex and time-consuming compared to BSL-2 and BSL-3 laboratories. The focus of this particular article is to address basic biosafety concerns and describe the entrance and exit procedures for the BSL-4 laboratory at the NIH/NIAID Integrated Research Facility at Fort Detrick. Such procedures include checking external systems that support the BSL-4 laboratory, and inspecting and donning positive-pressure suits, entering the laboratory, moving through air pressure-resistant doors, and connecting to air-supply hoses. We will also discuss moving within and exiting the BSL-4 suit laboratories, including using the chemical shower and removing and storing positive-pressure suits.

Biosafety and Biosecurity: A Relative Risk-Based Framework for Safer, More Secure, and Sustainable Laboratory Capacity Building.

Science.gov (United States)

Dickmann, Petra; Sheeley, Heather; Lightfoot, Nigel

2015-01-01

Laboratory capacity building is characterized by a paradox between endemicity and resources: countries with high endemicity of pathogenic agents often have low and intermittent resources (water, electricity) and capacities (laboratories, trained staff, adequate regulations). Meanwhile, countries with low endemicity of pathogenic agents often have high-containment facilities with costly infrastructure and maintenance governed by regulations. The common practice of exporting high biocontainment facilities and standards is not sustainable and concerns about biosafety and biosecurity require careful consideration. A group at Chatham House developed a draft conceptual framework for safer, more secure, and sustainable laboratory capacity building. The draft generic framework is guided by the phrase "LOCAL - PEOPLE - MAKE SENSE" that represents three major principles: capacity building according to local needs (local) with an emphasis on relationship and trust building (people) and continuous outcome and impact measurement (make sense). This draft generic framework can serve as a blueprint for international policy decision-making on improving biosafety and biosecurity in laboratory capacity building, but requires more testing and detailing development.

Biosafety and Biosecurity: A relative risk-based framework for safer, more secure and sustainable laboratory capacity building

Directory of Open Access Journals (Sweden)

Petra eDickmann

2015-10-01

Full Text Available Background: Laboratory capacity building is characterized by a paradox between endemicity and resources: Countries with high endemicity of pathogenic agents often have low and intermittent resources (water, electricity and capacities (laboratories, trained staff, adequate regulations. Meanwhile, countries with low endemicity of pathogenic agents often have high containment facilities with costly infrastructure and maintenance governed by regulations. The common practice of exporting high biocontainment facilities and standards is not sustainable and concerns about biosafety and biosecurity require careful consideration. Methods: A group at Chatham House developed a draft conceptual framework for safer, more secure and sustainable laboratory capacity building. Results: The draft generic framework is guided by the phrase ‘LOCAL – PEOPLE – MAKE SENSE’ that represents three major principles: capacity building according to local needs (local with an emphasis on relationship and trust-building (people and continuous outcome and impact measurement (make sense. Conclusions: This draft generic framework can serve as a blueprint for international policy decision-making on improving biosafety and biosecurity in laboratory capacity building, but requires more testing and detailing development.

[Dimensional analysis of the concept of biosafety due to bioterrorism].

Science.gov (United States)

Bernard, Laurence; Shaha, Maya

2014-03-01

In recent years with the strengthening of the discourse surrounding the biological risk of bioterrorist nature, the concept of biosafety emerged gradually. A dimensional analysis was used to contextualize the concept. Initially, biosafety was essentially a technical term related to the risks of contamination in laboratories or food industry and then be used to protect biodiversity against the spread of genetically modified organisms (GMOs) into the environment. Now, it is increasingly used in reference to the prevention and infections control, even though its use remains marginal. However, biosecurity may be defined as the security of life and therefore affect the safety devices participating in the government of bodies and power over life. A more critical approach including social and political dimensions within a Foucauldian perspective is needed to expand the scope of the biosecurity concept up to biological hazards constructs.

Genome-wide siRNA Screening at Biosafety Level 4 Reveals a Crucial Role for Fibrillarin in Henipavirus Infection.

Directory of Open Access Journals (Sweden)

Celine Deffrasnes

2016-03-01

Full Text Available Hendra and Nipah viruses (genus Henipavirus, family Paramyxoviridae are highly pathogenic bat-borne viruses. The need for high biocontainment when studying henipaviruses has hindered the development of therapeutics and knowledge of the viral infection cycle. We have performed a genome-wide siRNA screen at biosafety level 4 that identified 585 human proteins required for henipavirus infection. The host protein with the largest impact was fibrillarin, a nucleolar methyltransferase that was also required by measles, mumps and respiratory syncytial viruses for infection. While not required for cell entry, henipavirus RNA and protein syntheses were greatly impaired in cells lacking fibrillarin, indicating a crucial role in the RNA replication phase of infection. During infection, the Hendra virus matrix protein co-localized with fibrillarin in cell nucleoli, and co-associated as a complex in pulldown studies, while its nuclear import was unaffected in fibrillarin-depleted cells. Mutagenesis studies showed that the methyltransferase activity of fibrillarin was required for henipavirus infection, suggesting that this enzyme could be targeted therapeutically to combat henipavirus infections.

Public submissions on the Uganda national biotechnology and biosafety bill, 2012 reveal consensus for Uganda legislators to pass the bill

Directory of Open Access Journals (Sweden)

Clet Wandui Masiga

2015-10-01

Full Text Available The Cartagena Protocol on Biosafety to the Convention on Biological Diversity is an internationally binding instrument addressing issues of biosafety. Biosafety refers to the need to protect human health and the environment from the possible adverse effects of the products of modern biotechnology. Accordingly all countries to the convention are required to put in place regulatory mechanisms to enhance the safety of biotechnology in the context of the Convention’s overall goal of reducing all potential threats to biological diversity, while taking into account the risks to human health. Therefore each country party to the convention has its own procedures to enact laws to guide the safe use of biotechnology. In Uganda the process involves the drafting of the bill by the first parliamentary counsel, approval by cabinet, first reading at the parliament, committal to the responsible parliamentary sessional committee, tabling of the bill for public hearing, consultations, and final approval. In Uganda, the Committee on Science and Technology is responsible for the Biosafety Bill. In March 2013, the Committee tabled the bill for public hearing and submissions from public institutions. There were comments supporting the passage of the Bill and comments in objection.The reasons for objection are mainly due to precaution, speculation, lack of knowledge about biotechnology and biosafety, and alleged influence from biosafety entrepreneurs. This article reviews these public views, revealing controversy and possible consensus to pass the bill.

[Biosafety provision on handling pathogenic biological agents on the concept of biorisk assessment and management].

Science.gov (United States)

Dobrokhotskiĭ, O N; Kolombet, L V

2010-01-01

The paper shows it urgent to realize the concept of biological risk assessment and management on handling pathogenic biological agents (PBA). It gives a number of objective reasons that impede development of a methodology to assess laboratory biological risks. A concept of continuous improvement (a process approach) is proposed for use as a biorisk management tool for biosafety assurance when handling PBA. It is demonstrated that development of international cooperation urgently requires that national concepts and standards be harmonized with international regulatory documents on biosafety assurance on handling PBA.

A Curriculum-Based Approach to Teaching Biosafety Through eLearning.

Science.gov (United States)

Ndolo, Dennis O; Wach, Michael; Rüdelsheim, Patrick; Craig, Wendy

2018-01-01

Anyone working in biosafety capacity enhancement faces the challenge of ensuring that the impact of a capacity enhancing activity continues and becomes sustainable beyond the depletion of funding. Many training efforts face the limitation of one-off events: they only reach those people present at the time. It becomes incumbent upon the trainees to pass on the training to colleagues as best they can, whilst the demand for the training never appears to diminish. However, beyond the initial effort to establish the basic content, repeating capacity enhancement events in different locations is usually not economically feasible. Also, the lack of infrastructure and other resources needed to support a robust training programme hinder operationalizing a "train-the-trainer" approach to biosafety training. One way to address these challenges is through the use of eLearning modules that can be delivered online, globally, continuously, at low cost, and on an as-needed basis to multiple audiences. Once the modules are developed and peer-reviewed, they can be maintained on a remote server and made available to various audiences through a password-protected portal that delivers the programme content, administers preliminary and final exams, and provides the administrative infrastructure to register users and track their progress through the modules. Crucial to the implementation of such an eLearning programme is an approach in which the modules are intentionally developed together as a cohesive curriculum. Once developed, such a curriculum can be released as a stand-alone programme for the training of governmental risk assessors and regulators or used as accredited components in post-graduate degree programmes in biosafety, at minimal cost to the government or university. Examples from the portfolio of eLearning modules developed by the International Centre for Genetic Engineering and Biotechnology (ICGEB) are provided to demonstrate these key features.

The Programs for Strengthening Biosafety and Biosecurity in Georgia

International Nuclear Information System (INIS)

Kutateladze, M.

2007-01-01

The difficulties connected with the political changes due to the breakdown of Soviet system caused serious problems in biosafety and security in Georgia. During last 10-12 years, lack of state financing caused destruction of the systems of biosafety in the relevant Institutions - the system became formal and completely damaged. The program for prevention of biological weapons (BW) proliferation operates in Georgia since 2002. The agreement between United States and Georgia covers several issues, including prevention the proliferation of biological weapons technology, pathogenic strains and their expertise at the source. Department of Defense of the USA supports the country to consolidate especially dangerous pathogens (EDPs) into safe and secure central reference laboratories, improve our capabilities to detect and respond to disease outbreaks caused by the EDP, integrate Georgian scientists into the international scientific community and eliminate BW infrastructure and technology. Elimination of BW infrastructure includes dismantle and elimination of biological threat agent materials, dual-use equipment and associated infrastructure. Biosecurity and Biosafety involve implementation of technical enhancements to meet and maintain US standards, create a personal reliability program to reduce the release of pathogens and secure a safer working environment for personnel. Currently, two projects are funded through the Cooperative Biological Research (CBR) in Georgia - to study the ecology, biodiversity, genetic clustering and virulence of Yersinia pestis and Vibrio spp. These projects are performed at the National Center for Disease Control and Medical statistics (NCDC) and G. Eliava Institute of Bacteriophages, Microbiology and Virology. These projects are carried out due to the fruitful collaboration between Georgian and American scientists. Threat Agent Detection and Response (TADR) system provides enhanced reporting, detection and response for human and animal EDPs

Mesoporous Silica and Organosilica Nanoparticles: Physical Chemistry, Biosafety, Delivery Strategies, and Biomedical Applications

KAUST Repository

Croissant, Jonas G.; Fatieiev, Yevhen; Almalik, Abdulaziz; Khashab, Niveen M.

2017-01-01

organosilica, and fully hybridized organosilica (periodic mesoporous organosilicas) governs not only the physico-chemical properties but also the biosafety of the nanoparticles. The impact of the hybridization on the biocompatibility, protein corona

Estimates and implications of the costs of compliance with biosafety regulations in developing countries.

Science.gov (United States)

Falck-Zepeda, Jose; Yorobe, Jose; Husin, Bahagiawati Amir; Manalo, Abraham; Lokollo, Erna; Ramon, Godfrey; Zambrano, Patricia; Sutrisno

2012-01-01

Estimating the cost of compliance with biosafety regulations is important as it helps developers focus their investments in producer development. We provide estimates for the cost of compliance for a set of technologies in Indonesia, the Philippines and other countries. These costs vary from US $100,000 to 1.7 million. These are estimates of regulatory costs and do not include product development or deployment costs. Cost estimates need to be compared with potential gains when the technology is introduced in these countries and the gains in knowledge accumulate during the biosafety assessment process. Although the cost of compliance is important, time delays and uncertainty are even more important and may have an adverse impact on innovations reaching farmers.

Establishment of Biosafety Level-3 (BSL-3 laboratory: Important criteria to consider while designing, constructing, commissioning & operating the facility in Indian setting

Directory of Open Access Journals (Sweden)

Devendra T Mourya

2014-01-01

This article describes the major steps involved in the process of construction of a BSL-3 laboratory in Indian settings, from freezing the concept of proposal to operationalization phase. The key to success of this kind of project is strong institutional commitment to biosafety norms, adequate fund availability, careful planning and designing, hiring good construction agency, monitoring by experienced consultancy agency and involvement of scientific and engineering personnel with biocontainment experience in the process.

Lessons to be Learned from Recent Biosafety Incidents in the United States.

Science.gov (United States)

Weiss, Shay; Yitzhaki, Shmuel; Shapira, Shmuel C

2015-05-01

During recent months, the Centers for Disease Control and Prevention (CDC) announced the occurrence of three major biosafety incidents, raising serious concern about biosafety and biosecurity guideline implementation in the most prestigious agencies in the United States: the CDC, the National Institutes of Health (NIH) and the Federal Drug Administration (FDA). These lapses included: a) the mishandling of Bacillus anthracis spores potentially exposing dozens of employees to anthrax; b) the shipment of low pathogenic influenza virus unknowingly cross-contaminated with a highly pathogenic strain; and c) an inventory lapse of hundreds of samples of biological agents, including six vials of variola virus kept in a cold storage room for decades, unnoticed. In this review we present the published data on these events, report the CDC inquiry's main findings, and discuss the key lessons to be learnt to ensure safer scientific practice in biomedical and microbiological service and research laboratories.

Biosafety considerations for selectable and scorable markers used in cassava (Manihot esculenta Crantz) biotechnology.

Science.gov (United States)

Petersen, William; Umbeck, Paul; Hokanson, Karen; Halsey, Mark

2005-01-01

Cassava is an important subsistence crop grown only in the tropics, and represents a major source of calories for many people in developing countries. Improvements in the areas of resistance to insects and viral diseases, enhanced nutritional qualities, reduced cyanogenic content and modified starch characteristics are urgently needed. Traditional breeding is hampered by the nature of the crop, which has a high degree of heterozygosity, irregular flowering, and poor seed set. Biotechnology has the potential to enhance crop improvement efforts, and genetic engineering techniques for cassava have thus been developed over the past decade. Selectable and scorable markers are critical to efficient transformation technology, and must be evaluated for biosafety, as well as efficiency and cost-effectiveness. In order to facilitate research planning and regulatory submission, the literature on biosafety aspects of the selectable and scorable markers currently used in cassava biotechnology is surveyed. The source, mode of action and current use of each marker gene is described. The potential for toxicity, allergenicity, pleiotropic effects, horizontal gene transfer, and the impact of these on food or feed safety and environmental safety is evaluated. Based on extensive information, the selectable marker genes nptII, hpt, bar/pat, and manA, and the scorable marker gene uidA, all have little risk in terms of biosafety. These appear to represent the safest options for use in cassava biotechnology available at this time.

Challenges and Practices in Building and Implementing Biosafety and Biosecurity Programs to Enable Basic and Translational Research with Select Agents.

Science.gov (United States)

Jonsson, Colleen B; Cole, Kelly Stefano; Roy, Chad J; Perlin, David S; Byrne, Gerald

2013-04-29

Select agent research in the United States must meet federally-mandated biological surety guidelines and rules which are comprised of two main components: biosecurity and biosafety. Biosecurity is the process employed for ensuring biological agents are properly safeguarded against theft, loss, diversion, unauthorized access or use/release. Biosafety is those processes that ensure that operations with such agents are conducted in a safe, secure and reliable manner. As such, a biological surety program is generally concerned with biological agents that present high risk for adverse medical and/or agricultural consequences upon release outside of proper containment. The U.S. Regional and National Biocontainment Laboratories (RBL, NBL) represent expertise in this type of research, and are actively engaged in the development of programs to address these critical needs and federal requirements. While this comprises an ongoing activity for the RBLs, NBLs and other facilities that handle select agents as new guidelines and regulations are implemented, the present article is written with the goal of presenting a simplified yet comprehensive review of these requirements. Herein, we discuss the requirements and the various activities that the RBL/NBL programs have implemented to achieve these metrics set forth by various agencies within the U.S. Federal government.

The influence of the Cartagena Protocol on Biosafety: Comparing Mexico, China and South Africa..

NARCIS (Netherlands)

Gupta, A.; Falkner, R.

2006-01-01

This paper analyzes how the Cartagena Protocol on Biosafety, a global regime governing trade in genetically modified organisms (GMOs), is influencing agricultural biotechnology policy choices in developing countries/emerging economies. Through empirical analysis of Mexico, China and South Africa, we

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

Investigation on Live Pig Insurance and Ill Dead Pig Biosafety Disposal in Xinzheng,Henan Province%河南新郑市的生猪保险联动

Institute of Scientific and Technical Information of China (English)

刘炜; 张代宝; 贾松涛; 赵立军; 周婷婷

2014-01-01

Dead pig biosafety disposal is related to public health,food safety and sustainable and health development of animal husbandry. In order to make clear the situation of pig farming,dead pig biosafety disposal,live pig insur-ance and quarantine supervision in Xinzheng City,Henan Province,investigations were carried out on biosafety dis-posal and live pig insurance. The achievements and problems were analyzed,and suggestions were proposed on dead pig biosafety disposal.%文章介绍了河南新郑市推行生猪保险与病死猪无害化处理联动的情况和成效。针对这一工作存在的问题提出了建立联动机制的建议。

Biossegurança em fonoaudiologia Biosafety in Speech, Language and Hearing Sciences

Directory of Open Access Journals (Sweden)

Marcela do Amaral de Albuquerque

2013-01-01

indicating its performance. The percentage value of each questionnaire could vary from 0 to 100%, and the greater the percentage obtained, the more knowledge and applicability of standards of biosafety professionals in the clinical routine. Tracks were taken (0-25%, (26-50%, (51-75% and (76-100% to distinguish the level of knowledge and application of precautionary measures by the participants. RESULTS: of one hundred speech therapists assessed by the questionnaires (100%, 1% obtained the percentage in the range (0 to 25%, 45% (26 to 50%, between 50% (51 to 75% and 4% (76 to 100%. CONCLUSION: the most of the professionals who participated knows and applies biosafety measures.

Mesoporous Silica and Organosilica Nanoparticles: Physical Chemistry, Biosafety, Delivery Strategies, and Biomedical Applications

KAUST Repository

Croissant, Jonas G.

2017-11-30

Predetermining the physico-chemical properties, biosafety, and stimuli-responsiveness of nanomaterials in biological environments is essential for safe and effective biomedical applications. At the forefront of biomedical research, mesoporous silica nanoparticles and mesoporous organosilica nanoparticles are increasingly investigated to predict their biological outcome by materials design. In this review, it is first chronicled that how the nanomaterial design of pure silica, partially hybridized organosilica, and fully hybridized organosilica (periodic mesoporous organosilicas) governs not only the physico-chemical properties but also the biosafety of the nanoparticles. The impact of the hybridization on the biocompatibility, protein corona, biodistribution, biodegradability, and clearance of the silica-based particles is described. Then, the influence of the surface engineering, the framework hybridization, as well as the morphology of the particles, on the ability to load and controllably deliver drugs under internal biological stimuli (e.g., pH, redox, enzymes) and external noninvasive stimuli (e.g., light, magnetic, ultrasound) are presented. To conclude, trends in the biomedical applications of silica and organosilica nanovectors are delineated, such as unconventional bioimaging techniques, large cargo delivery, combination therapy, gaseous molecule delivery, antimicrobial protection, and Alzheimer\\'s disease therapy.

The Bioethics and Biosafety technosciences and transcendence of limits

International Nuclear Information System (INIS)

Newton, Aquiles von Zuben

2008-01-01

Bioethics as a cultural phenomenon is nowadays presented as a paradigmatic locus of reflection, critical analysis, inquiries and debates about ethical problems and moral dilemmas provoked by scientific researches in the field of Biotechnology, with its innovations and applications. Humanity, since the middle of X X Th Century, lives under uncertainty and fear. Bioethics responds to the need of a ethical reflection which follows such inquiries and technological applications. One of the subjects of Bioethics is the biosafety, which deals with biohazards. In this process, there is a privileged place many questions such as technological evaluation, risk management and, in a special way, the precautionary principle. This study focus on these questions

Biosafety assessment protocols for new organisms in New Zealand: Can they apply internationally to emerging technologies?

International Nuclear Information System (INIS)

Barratt, B.I.P.; Moeed, A.; Malone, L.A.

2006-01-01

An analysis of established biosafety protocols for release into the environment of exotic plants and biological control agents for weeds and arthropod pests has been carried out to determine whether such protocols can be applied to relatively new and emerging technologies intended for the primary production industries, such as transgenic plants. Example case studies are described to indicate the scope of issues considered by regulators who make decisions on new organism releases. No transgenic plants have been released to date in New Zealand, but two field test approvals are described as examples. An analysis of the biosafety protocols has shown that, while many of the risk criteria considered for decision-making by regulators are similar for all new organisms, a case-by-case examination of risks and potential impacts is required in order to fully assess risk. The value of post-release monitoring and validation of decisions made by regulators is emphasised

Case studies on the use of biotechnologies and on biosafety provisions in four African countries.

Science.gov (United States)

Black, Robert; Fava, Fabio; Mattei, Niccolo; Robert, Vincent; Seal, Susan; Verdier, Valerie

2011-12-20

This review is based on a study commissioned by the European Commission on the evaluation of scientific, technical and institutional challenges, priorities and bottlenecks for biotechnologies and regional harmonisation of biosafety in Africa. Biotechnology was considered within four domains: agricultural biotechnologies ('Green'), industrial biotechnologies and biotechnologies for environmental remediation ('White'), biotechnologies in aquaculture ('Blue') and biotechnologies for healthcare ('Red'). An important consideration was the decline in partnerships between the EU and developing countries because of the original public antipathy to some green biotechnologies, particularly genetically modified organisms (GMOs) and food from GM crops in Europe. The study focus reported here was West Africa (Ghana, Senegal, Mali and Burkina Faso). The overall conclusion was that whereas high-quality research was proceeding in the countries visited, funding is not sustained and there is little evidence of practical application of biotechnology and benefit to farmers and the wider community. Research and development that was being carried out on genetically modified crop varieties was concentrating on improving food security and therefore unlikely to have significant impact on EU markets and consumers. However, there is much non-controversial green biotechnology such as molecular diagnostics for plant and animal disease and marker-assisted selection for breeding that has great potential application. Regarding white biotechnology, it is currently occupying only a very small industrial niche in West Africa, basically in the sole sector of the production of liquid biofuels (i.e., bio-ethanol) from indigenous and locally planted biomass (very often non-food crops). The presence of diffused small-scale fish production is the basis to develop and apply new (Blue) aquaculture technologies and, where the research conditions and the production sector can permit, to increase this type of

Biosafety decisions and perceived commercial risks: The role of GM-free private standards

OpenAIRE

Gruère, Guillaume; Sengupta, Debdatta

2009-01-01

"We herein investigate the observed discrepancy between real and perceived commercial risks associated with the use of genetically modified (GM) products in developing countries. We focus particularly on the effects of GM-free private standards set up by food companies in Europe and other countries on biotechnology and biosafety policy decisions in food-exporting developing countries. Based on field visits made to South Africa, Namibia, and Kenya in June 2007, and secondary information from t...

New International Initiatives on Enhancement of Biosafety and Biosecurity Regulations for Laboratories Handling Infectious Agents

International Nuclear Information System (INIS)

Netesov, S. V.; Drozdov, I. G.

2007-01-01

Before we entered the era of antibiotics, development of antiseptics rules and reliable water purification systems the infectious pathogens had played a major role in morbidity and mortality of global human population. The advances in revealing the nature of dangerous infections and studying their causative agents during the recent years have led not only to big progress in their control but also to the study of their potential as weapons. During the last fifty years, several attempts have been made to use them for criminal or terrorist purposes that demonstrated that even primitively organized terrorist attacks may lead to quite significant consequences. The October 2001 events showed that bioterrorism attacks may be prepared, probably, as a result of theft of the pathogen from a lab. All this led to the revision and radical improvement of current national rules and international recommendations in the field of handling, storage and transportation of infectious agents. As a result, during the past two years these rules have been significantly revised by both the World Health Organization and some countries. However, their harmonization of is still far from what is desired. Therefore, biosafety professionals in some countries, including those of the European Union, are establishing professional biosafety associations. In addition, new initiatives are being proposed to develop internationally harmonized biosecurity rules to govern dangerous pathogens handling and storage. The most important of them are as follows: 1. Development, under the auspices of WHO, of new recommendations concerning a set of requirements to provide physical security of both biological agents and laboratories involved in research on extremely hazardous infections; 2. Enhacement, under the auspices of WHO, of current international recommendations on inventory procedures and regulations, inventory monitoring, and transportation of specimens and strains of extremely hazardous infections; 3

Biosafety management and commercial use of genetically modified crops in China.

Science.gov (United States)

Li, Yunhe; Peng, Yufa; Hallerman, Eric M; Wu, Kongming

2014-04-01

As a developing country with relatively limited arable land, China is making great efforts for development and use of genetically modified (GM) crops to boost agricultural productivity. Many GM crop varieties have been developed in China in recent years; in particular, China is playing a leading role in development of insect-resistant GM rice lines. To ensure the safe use of GM crops, biosafety risk assessments are required as an important part of the regulatory oversight of such products. With over 20 years of nationwide promotion of agricultural biotechnology, a relatively well-developed regulatory system for risk assessment and management of GM plants has been developed that establishes a firm basis for safe use of GM crops. So far, a total of seven GM crops involving ten events have been approved for commercial planting, and 5 GM crops with a total of 37 events have been approved for import as processing material in China. However, currently only insect-resistant Bt cotton and disease-resistant papaya have been commercially planted on a large scale. The planting of Bt cotton and disease-resistant papaya have provided efficient protection against cotton bollworms and Papaya ringspot virus (PRSV), respectively. As a consequence, chemical application to these crops has been significantly reduced, enhancing farm income while reducing human and non-target organism exposure to toxic chemicals. This article provides useful information for the colleagues, in particular for them whose mother tongue is not Chinese, to clearly understand the biosafety regulation and commercial use of genetically modified crops in China.

Biosafety preclinical trials of xenogenic, Allogeniec and autologous progenitor cells from fat tissue

OpenAIRE

Melikhova, Vs; Saburina, I.; Repin, V.; Novikova, N.; Murashev, A.; Orlov, A.

2008-01-01

Due to wide spread of new methods of regenerative medicine on basis of stem cells it has become increasingly necessary to establish standards of techniques using them. Preclinical trial of a new technology after receiving preliminary experiment results is a primary stage of its adoption. We carried out the experiments to assess biosafety of autogenous, allergenic and xenogeneic cultures of human and rat cells in models under standard preclinical experiments conditions used in a presentday pha...

Air flow optimization for energy efficient blower of biosafety cabinet class II A2

Science.gov (United States)

Ibrahim, M. D.; Mohtar, M. Z.; Alias, A. A.; Wong, L. K.; Yunos, Y. S.; Rahman, M. R. A.; Zulkharnain, A.; Tan, C. S.; Thayan, R.

2017-04-01

An energy efficient Biosafety Cabinet (BSC) has become a big challenge for manufacturers to develop BSC with the highest level of protection. The objective of research is to increase air flow velocity discharge from centrifugal blower. An aerodynamic duct shape inspired by the shape of Peregrine Falcon’s wing during diving flight is added to the end of the centrifugal blower. Investigation of air movement is determined by computational fluid dynamics (CFD) simulation. The results showed that air velocity can be increased by double compared to typical manufactured BSC and no air recirculation. As conclusion, a novel design of aerodynamic duct shape successfully developed and proved that air velocity can be increase naturally with same impeller speed. It can contribute in increasing energy efficiency of the centrifugal blower. It is vital to BSC manufacturer and can be apply to Heating, Air Ventilation and Air Conditioning (HVAC) industries.

The ethics of biosafety considerations in gain-of-function research resulting in the creation of potential pandemic pathogens.

Science.gov (United States)

Evans, Nicholas Greig; Lipsitch, Marc; Levinson, Meira

2015-11-01

This paper proposes an ethical framework for evaluating biosafety risks of gain-of-function (GOF) experiments that create novel strains of influenza expected to be virulent and transmissible in humans, so-called potential pandemic pathogens (PPPs). Such research raises ethical concerns because of the risk that accidental release from a laboratory could lead to extensive or even global spread of a virulent pathogen. Biomedical research ethics has focused largely on human subjects research, while biosafety concerns about accidental infections, seen largely as a problem of occupational health, have been ignored. GOF/PPP research is an example of a small but important class of research where biosafety risks threaten public health, well beyond the small number of persons conducting the research.We argue that bioethical principles that ordinarily apply only to human subjects research should also apply to research that threatens public health, even if, as in GOF/PPP studies, the research involves no human subjects. Specifically we highlight the Nuremberg Code's requirements of 'fruitful results for the good of society, unprocurable by other methods', and proportionality of risk and humanitarian benefit, as broad ethical principles that recur in later documents on research ethics and should also apply to certain types of research not involving human subjects. We address several potential objections to this view, and conclude with recommendations for bringing these ethical considerations into policy development. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Materials for high-level waste containment

International Nuclear Information System (INIS)

Marsh, G.P.

1982-01-01

The function of the high-level radioactive waste container in storage and of a container/overpack combination in disposal is considered. The consequent properties required from potential fabrication materials are discussed. The strategy adopted in selecting containment materials and the experimental programme underway to evaluate them are described. (U.K.)

[Labeling of food containing genetically modified organisms: international policies and Brazilian legislation].

Science.gov (United States)

Costa, Thadeu Estevam Moreira Maramaldo; Marin, Victor Augustus

2011-08-01

The increase in surface area planted with genetically modified crops, with the subsequent transfer of such crops into the general environment for commercial trade, has raised questions about the safety of these products. The introduction of the Cartagena Protocol on Biosafety has led to the need to produce information and ensure training in this area for the implementation of policies on biosafety and for decision-making on the part of governments at the national, regional and international level. This article presents two main standpoints regarding the labeling of GM products (one adopted by the United States and the other by the European Union), as well as the position adopted by Brazil and its current legislation on labeling and commercial release of genetically modified (GM) products.

Biosafety: degree of importance in the point of view of undergraduate dental students from Univille

OpenAIRE

Maria Dalva de S. SCHROEDER; Constanza MARIN; Fabio MIRI

2010-01-01

Introduction and objective: This study evaluated the degree ofimportance regarding biosafety in the point of view of undergraduatedental students from the University of the Region of Joinville– Univille. Material and methods: The sample was composed of142 undergraduate dental students from first to fifth year, who wereasked to sign the term of free and clarified assent in order to answera questionnaire with 13 closed-ended and 2 open-ended questionsregarding dental clinical practice and conce...

Multipurpose container for low-level radioactive waste

International Nuclear Information System (INIS)

Anderson, R.T.; Pearson, S.D.

1993-01-01

A method is described for disposing of low-level radioactive waste, comprising the steps of (a) introducing the waste into a multipurpose container, the multipurpose container comprising a polymeric inner container disposed within a concrete outer shell, the shape of the inner container conforming substantially to the shape of the outer shell's inner surface, (b) transporting the waste in the same multipurpose container to a storage location, and (c) storing the container at the storage location

Biosafety considerations of RNAi-mediated virus resistance in fruit-tree cultivars and in rootstock.

Science.gov (United States)

Lemgo, Godwin Nana Yaw; Sabbadini, Silvia; Pandolfini, Tiziana; Mezzetti, Bruno

2013-12-01

A major application of RNA interference (RNAi) is envisaged for the production of virus-resistant transgenic plants. For fruit trees, this remains the most, if not the only, viable option for the control of plant viral disease outbreaks in cultivated orchards, due to the difficulties associated with the use of traditional and conventional disease-control measures. The use of RNAi might provide an additional benefit for woody crops if silenced rootstock can efficiently transmit the silencing signal to non-transformed scions, as has already been demonstrated in herbaceous plants. This would provide a great opportunity to produce non-transgenic fruit from transgenic rootstock. In this review, we scrutinise some of the concerns that might arise with the use of RNAi for engineering virus-resistant plants, and we speculate that this virus resistance has fewer biosafety concerns. This is mainly because RNAi-eliciting constructs only express small RNA molecules rather than proteins, and because this technology can be applied using plant rootstock that can confer virus resistance to the scion, leaving the scion untransformed. We discuss the main biosafety concerns related to the release of new types of virus-resistant plants and the risk assessment approaches in the application of existing regulatory systems (in particular, those of the European Union, the USA, and Canada) for the evaluation and approval of RNAi-mediated virus-resistant plants, either as transgenic varieties or as plant virus resistance induced by transgenic rootstock.

Guidelines for safe work practices in human and animal medical diagnostic laboratories. Recommendations of a CDC-convened, Biosafety Blue Ribbon Panel.

Science.gov (United States)

Miller, J Michael; Astles, Rex; Baszler, Timothy; Chapin, Kimberle; Carey, Roberta; Garcia, Lynne; Gray, Larry; Larone, Davise; Pentella, Michael; Pollock, Anne; Shapiro, Daniel S; Weirich, Elizabeth; Wiedbrauk, Danny

2012-01-06

Prevention of injuries and occupational infections in U.S. laboratories has been a concern for many years. CDC and the National Institutes of Health addressed the topic in their publication Biosafety in Microbiological and Biomedical Laboratories, now in its 5th edition (BMBL-5). BMBL-5, however, was not designed to address the day-to-day operations of diagnostic laboratories in human and animal medicine. In 2008, CDC convened a Blue Ribbon Panel of laboratory representatives from a variety of agencies, laboratory organizations, and facilities to review laboratory biosafety in diagnostic laboratories. The members of this panel recommended that biosafety guidelines be developed to address the unique operational needs of the diagnostic laboratory community and that they be science based and made available broadly. These guidelines promote a culture of safety and include recommendations that supplement BMBL-5 by addressing the unique needs of the diagnostic laboratory. They are not requirements but recommendations that represent current science and sound judgment that can foster a safe working environment for all laboratorians. Throughout these guidelines, quality laboratory science is reinforced by a common-sense approach to biosafety in day-to-day activities. Because many of the same diagnostic techniques are used in human and animal diagnostic laboratories, the text is presented with this in mind. All functions of the human and animal diagnostic laboratory--microbiology, chemistry, hematology, and pathology with autopsy and necropsy guidance--are addressed. A specific section for veterinary diagnostic laboratories addresses the veterinary issues not shared by other human laboratory departments. Recommendations for all laboratories include use of Class IIA2 biological safety cabinets that are inspected annually; frequent hand washing; use of appropriate disinfectants, including 1:10 dilutions of household bleach; dependence on risk assessments for many activities

Alternative containers for low-level wastes containing large amounts of tritium

International Nuclear Information System (INIS)

Gause, E.P.; Lee, B.S.; MacKenzie, D.R.; Wiswall, R. Jr.

1984-11-01

High-activity tritiated waste generated in the United States is mainly composed of tritium gas and tritium-contaminated organic solvents sorbed onto Speedi-Dri which are packaged in small glass bulbs. Low-activity waste consists of solidified and adsorbed liquids. In this report, current packages for high-activity gaseous and low-activity adsorbed liquid wastes are emphasized with regard to containment potential. Containers for low-level radioactive waste containing large amounts of tritium need to be developed. An integrity may be threatened by: physical degradation due to soil corrosion, gas pressure build-up (due to radiolysis and/or biodegradation), rapid permeation of tritium through the container, and corrosion from container contents. Literature available on these points is summarized in this report. 136 references, 20 figures, 40 tables

In-house PCR with DNA extracted directly from positive slides to confirm or exclude the diagnosis of tuberculosis: focus on biosafety.

Science.gov (United States)

de Almeida, Isabela Neves; Aleixo, Agdemir Valéria; Carvalho, Wânia da Silva; de Miranda, Silvana Spindola

2015-01-01

The possibility to obtain DNA from smears is a valuable alternative to remedy the lack of samples when they are totally used for bacilloscopy; this technique solves the biosafety problem related to a possible accident with the transportation of flasks containing potentially transmissible clinical samples. Hence, the purpose of this study was to utilize the insertion sequence IS6110 for amplification of DNA from a smear-positive sample for tuberculosis (TB) diagnosis. Among the 52 positive bacilloscopies, sensitivity, specificity, positive predictive value and negative predictive value were 52.3%, 100%, 100% and 89.7%, respectively whereas accuracy was 90.7%. The IS6110-based PCR for TB diagnosis developed in DNA extracted from a positive smear is a fast, simple, specific, and safe method. Copyright © 2014 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

PIC-container for containment and disposal of low and intermediate level radioactive wastes

International Nuclear Information System (INIS)

Araki, Kunio; Shinji, Yoshimasa; Maki, Yasuro; Ishizaki, Kanjiro; Minegishi, Keiichi; Sudoh, Giichi.

1981-03-01

Steel fiber reinforced polymer-impregnated concrete (SFPIC) has been investigated for low and intermediate level radioactive waste containers. The present study has been carried out by the following stages. A) Preliminary evaluation: 60 L size container for cold and hot tests. B) Evaluation of size effect: 200 L size container for cold tests. The 60 L and 200 L containers were designed as pressure-container (without equalizer) for 500 kg/cm 2 and 700 kg/cm 2 . Polymerization of impregnated methylmethacrylate monomer for stage-A and B were performed by 60 Co-γ ray radiation and thermal catalytic polymerization, respectively. Under the loading of 500 kg/cm 2 and 700 kg/cm 2 -outside hydraulic pressure, these containers were kept in their good condition. The observed maximum strains were about 1380 x 10 -6 and 3950 x 10 -6 at the outside central position of container body for circumferential direction of the 60 L and 200 L container, respectively. An accelerated leaching test was performed by charging the concentrate of the liquid radioactive waste from JMTR in JAERI into the container. Although they were immersed in deionized water for 400 days, nuclides were not leached from the container. From results of various tests, it was evaluated that the SFPIC-container was suitable for containment and disposal of low and intermediate level radioactive wastes. There was not any great difference between the two size containers for the physical and chemical properties except in their preparation process. (author)

Analysis of the economic impact of environmental biosafety works projects in healthcare centres in extremadura (spain)

OpenAIRE

García Sanz-Calcedo, Justo; Monzón-González, Pedro

2014-01-01

The aim of this paper is to analyze the results obtained in the methodological application of techniques aimed at the maintenance of environmental biosafety in works of reform and expansion of healthcare centres in Extremadura, Spain during 2004-2010, assessing the costs of its implementation and contrasting if the use of a BSA project in phase of works affects the probability of nosocomial infection and the conditions of health and safety. The average investment accounted for a cost of 5.5 €...

Green conversion of graphene oxide to graphene nanosheets and its biosafety study.

Directory of Open Access Journals (Sweden)

Adhiraj Dasgupta

Full Text Available Chemical reduction of graphene oxide (GO to graphene employs the use of toxic and environmentally harmful reducing agents, hindering mass production of graphene which is of tremendous technological importance. In this study we report a green approach to the synthesis of graphene, bio-reduced by crude polysaccharide. The polysaccharide reduces exfoliated GO to graphene at room temperature in an aqueous medium. Transmission electron microscopy image provides clear evidence for the formation of few layer graphene. Characterization of the resulting polysaccharide reduced GO by Raman spectroscopy, Fourier transform infrared spectroscopy and Energy dispersive X-ray analysis confirms reduction of GO to graphene. We also investigated the degree of biosafety of the reduced GO and found it to be safe under 100 μg/ml.

Levels of Internationalization in the Container Shipping Industry

DEFF Research Database (Denmark)

Gadhia, Hitesh Kumar; Kotzab, Herbert; Prockl, Günter

2011-01-01

This paper examines the internationalization level of the world’s largest container shipping companies by examining their port networks. The results of our analysis show that only three of the nineteen companies could be considered as being truly ‘International’ and service the ‘lion’s share......’ of the major and minor ports distributed across the globe. The port networks of the other companies in our survey, whilst having individualized features, shared common characteristics. Guided by the ‘Uppsala Model of Incremental Internationalization’ (Johanson and Vahlne, 1977), we were able to identify four...... internationalization levels of a container shipping company that are indicated by their port network. We argue that the port network plays an additional role as it contributes to the internationalization level of the container shipping companies. This is important because the internationalization level affects...

Defense High Level Waste Disposal Container System Description Document

International Nuclear Information System (INIS)

Pettit, N. E.

2001-01-01

The Defense High Level Waste Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the accesses using a rail mounted transporter, and emplaced in emplacement drifts. The defense high level waste (HLW) disposal container provides long-term confinement of the commercial HLW and defense HLW (including immobilized plutonium waste forms [IPWF]) placed within disposable canisters, and withstands the loading, transfer, emplacement, and retrieval loads and environments. US Department of Energy (DOE)-owned spent nuclear fuel (SNF) in disposable canisters may also be placed in a defense HLW disposal container along with commercial HLW waste forms, which is known as co-disposal. The Defense High Level Waste Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container/waste package maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual canister temperatures after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Defense HLW disposal containers for HLW disposal will hold up to five HLW canisters. Defense HLW disposal containers for co-disposal will hold up to five HLW canisters arranged in a ring and one DOE SNF canister inserted in the center and/or one or more DOE SNF canisters displacing a HLW canister in the ring. Defense HLW disposal containers also will hold two Multi-Canister Overpacks (MCOs) and two HLW canisters in one disposal container. The disposal container will include outer and inner cylinders, outer and inner cylinder lids, and may include a canister guide. An exterior label will provide a means by

The biosafety of X-ray in bed

International Nuclear Information System (INIS)

Costa, A.S.; Vinco, Y.C.; Machado, C.P.

2015-01-01

This work aims to raise awareness on biosafety that the professional radiology needs to develop, for their own protection as well as the patient in bed during the examination of the X-ray. Assess why the use of many artifacts and discuss their safe use, the conditions necessary for operating activities that employ radioactive and radiological techniques are adopted for the benefit of society. Taking also into account the protection of workers, the public, and the patient environment. This study aims to evaluate the knowledge of technical professionals working in the field-performing x -rays in bed, currently academic course in radiology technologist. The results obtained show that 67 % of technicians, technologists’ future, use the personal protective equipment, and 25 % sometimes and never use 8 %, 92 %. Answered that in the period that is being performed on X -ray examination bed, but there are others bedridden in the same environment, with 88 % of patients in bed in bed not receive personal protective equipment nor collective protection equipment. Thus, we conclude that most technicians have cognition existing risks, so the individual protection measures are being carried out, but not by all. What still leaves to be desired is the protection of the patient in bed. These professionals need to be encouraged to study, so that we have trained professionals and holders of knowledge, enabling the improvement in labor and protection of professional and patient. (author)

Regulatory and biosafety issues in relation to transgenic animals in food and agriculture, feeds containing genetically modified organisms (GMO) and veterinary biologics

International Nuclear Information System (INIS)

Kochhar, H.P.S.; Gifford, G.A.; Kahn, S.

2005-01-01

Development of an effective regulatory system for genetically engineered animals and their products has been the subject of increasing discussion among researchers, industry and policy developers, as well as the public. Since transgenesis and cloning are relatively new scientific techniques, transgenic animals are new organisms for which there is limited information. The issues associated with the regulation and biosafety of transgenic animals pertain to environmental impact, human food safety, animal health and welfare, trade and ethics. To regulate this new and powerful technology predicated on limited background information is a challenge not only for the regulators, but also for the developers of such animals, who strive to prove that the animals are safe and merit bio-equivalency to their conventional counterparts. In principle, an effective regulatory sieve should permit safe products while forming a formidable barrier for those assessed of posing an unacceptable risk. Adoption of transgenic technology for use in agriculture will depend upon various factors that range from perceived benefits for humans and animals, to safe propagation, animal welfare considerations and integrity of species, as well as effects on bio-diversity. A regulatory framework designed to address the concerns connected with the environmental release of transgenic animals needs to also take into account the ability of genetically modified animals to survive and compete with conventional populations. Regulatory initiatives for biotechnology-derived animals and their products should ensure high standards for human and animal health; a sound scientific basis for evaluation; transparency and public involvement; and maintenance of genetic diversity. Feeds obtained by use of biotechnology have to be evaluated for animal and human safety by using parameters that define their molecular characterization, nutritional qualities and toxicological aspects, while veterinary biologics derived from

South African Ebola diagnostic response in Sierra Leone: A modular high biosafety field laboratory.

Directory of Open Access Journals (Sweden)

Janusz T Paweska

2017-06-01

Full Text Available In August 2014, the National Institute for Communicable Diseases (NICD in South Africa established a modular high-biosafety field Ebola diagnostic laboratory (SA FEDL near Freetown, Sierra Leone in response to the rapidly increasing number of Ebola virus disease (EVD cases.The SA FEDL operated in the Western Area of Sierra Leone, which remained a "hotspot" of the EVD epidemic for months. The FEDL was the only diagnostic capacity available to respond to the overwhelming demand for rapid EVD laboratory diagnosis for several weeks in the initial stages of the EVD crisis in the capital of Sierra Leone. Furthermore, the NICD set out to establish local capacity amongst Sierra Leonean nationals in all aspects of the FEDL functions from the outset. This led to the successful hand-over of the FEDL to the Sierra Leone Ministry of Health and Sanitation in March 2015. Between 25 August 2014 and 22 June 2016, the laboratory tested 11,250 specimens mostly from the Western Urban and Western Rural regions of Sierra Leone, of which 2,379 (21.14% tested positive for Ebola virus RNA.The bio-safety standards and the portability of the SA FEDL, offered a cost-effective and practical alternative for the rapid deployment of a field-operated high biocontainment facility. The SA FEDL teams demonstrated that it is highly beneficial to train the national staff in the course of formidable disease outbreak and accomplished their full integration into all operational and diagnostic aspects of the laboratory. This initiative contributed to the international efforts in bringing the EVD outbreak under control in Sierra Leone, as well as capacitating local African scientists and technologists to respond to diagnostic needs that might be required in future outbreaks of highly contagious pathogens.

South African Ebola diagnostic response in Sierra Leone: A modular high biosafety field laboratory.

Science.gov (United States)

Paweska, Janusz T; Jansen van Vuren, Petrus; Meier, Gunther H; le Roux, Chantel; Conteh, Ousman S; Kemp, Alan; Fourie, Cardia; Naidoo, Prabha; Naicker, Serisha; Ohaebosim, Phumza; Storm, Nadia; Hellferscee, Orienka; Ming Sun, Lisa K; Mogodi, Busisiwe; Prabdial-Sing, Nishi; du Plessis, Desiree; Greyling, Deidre; Loubser, Shayne; Goosen, Mark; McCulloch, Stewart D; Scott, Terence P; Moerdyk, Alexandra; Dlamini, Wesley; Konneh, Kelfala; Kamara, Idrissa L; Sowa, Dauda; Sorie, Samuel; Kargbo, Brima; Madhi, Shabir A

2017-06-01

In August 2014, the National Institute for Communicable Diseases (NICD) in South Africa established a modular high-biosafety field Ebola diagnostic laboratory (SA FEDL) near Freetown, Sierra Leone in response to the rapidly increasing number of Ebola virus disease (EVD) cases. The SA FEDL operated in the Western Area of Sierra Leone, which remained a "hotspot" of the EVD epidemic for months. The FEDL was the only diagnostic capacity available to respond to the overwhelming demand for rapid EVD laboratory diagnosis for several weeks in the initial stages of the EVD crisis in the capital of Sierra Leone. Furthermore, the NICD set out to establish local capacity amongst Sierra Leonean nationals in all aspects of the FEDL functions from the outset. This led to the successful hand-over of the FEDL to the Sierra Leone Ministry of Health and Sanitation in March 2015. Between 25 August 2014 and 22 June 2016, the laboratory tested 11,250 specimens mostly from the Western Urban and Western Rural regions of Sierra Leone, of which 2,379 (21.14%) tested positive for Ebola virus RNA. The bio-safety standards and the portability of the SA FEDL, offered a cost-effective and practical alternative for the rapid deployment of a field-operated high biocontainment facility. The SA FEDL teams demonstrated that it is highly beneficial to train the national staff in the course of formidable disease outbreak and accomplished their full integration into all operational and diagnostic aspects of the laboratory. This initiative contributed to the international efforts in bringing the EVD outbreak under control in Sierra Leone, as well as capacitating local African scientists and technologists to respond to diagnostic needs that might be required in future outbreaks of highly contagious pathogens.

Evaluation on biosafety in long-term administration, teratogenicity and local toxicity of developed product

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung-Ho; Kim, Jong-Chun; Kim, Se-Ra; Lee, Hae-Jun; Lee, Jin-Hee [Chonnam Nat. Univ., Gwangju (Korea, Republic of)

2006-01-15

We performed this study to determine biosafety of developed product in long-term administration and teratogenicity and local toxicity (skin and eye) of developed product (HemoHIM and HemoTonic). It is suggested that long-term administration with the developed products may not exert considerable side effects. It is concluded that the administration of HemoHIM or HemoTonic does not inflict any adverse effect on fetuses of pregnant mice. HemoHIM and HemoTonic could be considered as a no irritating materials to the skin and eye of the test animals. These results indicated that HemoHIM and HemoTonic might be a useful functional food, especially since it is a relatively nontoxic natural product.

Evaluation on biosafety in long-term administration, teratogenicity and local toxicity of developed product

International Nuclear Information System (INIS)

Kim, Sung-Ho; Kim, Jong-Chun; Kim, Se-Ra; Lee, Hae-Jun; Lee, Jin-Hee

2006-01-01

We performed this study to determine biosafety of developed product in long-term administration and teratogenicity and local toxicity (skin and eye) of developed product (HemoHIM and HemoTonic). It is suggested that long-term administration with the developed products may not exert considerable side effects. It is concluded that the administration of HemoHIM or HemoTonic does not inflict any adverse effect on fetuses of pregnant mice. HemoHIM and HemoTonic could be considered as a no irritating materials to the skin and eye of the test animals. These results indicated that HemoHIM and HemoTonic might be a useful functional food, especially since it is a relatively nontoxic natural product

Float level switch for a nuclear power plant containment vessel

International Nuclear Information System (INIS)

Powell, J.G.

1993-01-01

This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel. 1 figures

Float level switch for a nuclear power plant containment vessel

Science.gov (United States)

Powell, James G.

1993-01-01

This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel.

Developing biosafety risk hypotheses for invertebrates exposed to GM plants using conceptual food webs: a case study with elevated triacylglyceride levels in ryegrass.

Science.gov (United States)

Barratt, Barbara I P; Todd, Jacqui H; Burgess, Elisabeth P J; Malone, Louise A

2010-01-01

Regulators are acutely aware of the need for meaningful risk assessments to support decisions on the safety of GM crops to non-target invertebrates in determining their suitability for field release. We describe a process for developing appropriate, testable risk hypotheses for invertebrates in agroecosystems that might be exposed to plants developed by GM and future novel technologies. An existing model (PRONTI) generates a ranked list of invertebrate species for biosafety testing by accessing a database of biological, ecological and food web information about species which occur in cropping environments and their potential interactions with a particular stressor (Eco Invertebase). Our objective in this contribution is to explore and further utilise these resources to assist in the process of problem formulation by identifying potentially significant effects of the stressor on the invertebrate community and the ecosystem services they provide. We propose that for high ranking species, a conceptual food web using information in Eco Invertebase is constructed, and using an accepted regulatory risk analysis framework, the likelihood of risk, and magnitude of impact for each link in the food web is evaluated. Using as filters only those risks evaluated as likely to extremely likely, and the magnitude of an effect being considered as moderate to massive, the most significant potential effects can be identified. A stepwise approach is suggested to develop a sequence of appropriate tests. The GM ryegrass plant used as the "stressor" in this study has been modified to increase triacylglyceride levels in foliage by 100% to increase the metabolisable energy content of forage for grazing animals. The high-ranking "test" species chosen to illustrate the concept are New Zealand native species Wiseana cervinata (Walker) (Lepidoptera: Hepialidae), Persectania aversa (Walker) (Lepidoptera: Noctuidae), and the self-introduced grey field slug, Deroceras reticulatum (Müller). �

A container for storage and disposal of low-level waste

International Nuclear Information System (INIS)

Fish, R.L.; Butler, B.D.

1989-01-01

A unique concept for corrosion-resistant containers for storing and disposing of low-level radioactive, mixed and toxic wastes has been developed. The strength and low cost of carbon steel has been combined with the corrosion and abrasion resistance of a proprietary combination of polymers to provide an inexpensive alternative to currently available waste containers. The initial development effort has focused on a 55-gallon container, the B and W ECOSAFE-55 tm . However, Babcock and Wilcox (B and W) can develop a family of ECOSAFE waste containers using this technology to accommodate user-preferred configurations and volumes. The containers will be capable of accepting a wide range of low-level radioactive (LLRW) and industrial waste forms. Basic engineering design analyses and functional tests were performed to show compliance of the container with transportation functional requirements. These tests and analyses, along with chemical resistance tests, qualify the container for use in storing a wide range of radioactive and chemical wastes. For the container to be licensed for use as a high-integrity container in shallow land, low-level radioactive waste burial facilities, the Nuclear Regulatory Commission requires certain tests and analyses to demonstrate that container gross physical properties and identity can be maintained for 300 years. This paper describes the container concept in generic terms and provides information on the initial, ECOSAFE-55 container design, testing and engineering analysis efforts

Cermets for high level waste containment

International Nuclear Information System (INIS)

Aaron, W.S.; Quinby, T.C.; Kobisk, E.H.

1978-01-01

Cermet materials are currently under investigation as an alternate for the primary containment of high level wastes. The cermet in this study is an iron--nickel base metal matrix containing uniformly dispersed, micron-size fission product oxides, aluminosilicates, and titanates. Cermets possess high thermal conductivity, and typical waste loading of 70 wt % with volume reduction factors of 2 to 200 and low processing volatility losses have been realized. Preliminary leach studies indicate a leach resistance comparable to other candidate waste forms; however, more quantitative data are required. Actual waste studies have begun on NFS Acid Thorex, SRP dried sludge and fresh, unneutralized SRP process wastes

Development of an eco-friendly mosquitocidal agent from Alangium salvifolium against the dengue vector Aedes aegypti and its biosafety on the aquatic predator.

Science.gov (United States)

Thanigaivel, Annamalai; Vasantha-Srinivasan, Prabhakaran; Edwin, Edward-Sam; Ponsankar, Athirstam; Selin-Rani, Selvaraj; Chellappandian, Muthiah; Kalaivani, Kandaswamy; Senthil-Nathan, Sengottayan; Benelli, Giovanni

2018-04-01

Plant extracts with their enriched chemical constituents have established potential alternative mosquito control agents. In this research, we developed an eco-friendly mosquitocidal agent from Alangium salvifolium leaves against the dengue and Zika virus vector Aedes aegypti and we investigated its biosafety on the mosquito aquatic predator Toxorhynchites splendens. Results showed that the methanolic extract of A. salvifolium leaves was composed by eight main compounds, with major peak area for hexadecenoic acid (21.74%). LC 50 and LC 90 values calculated on Ae. aegypti fourth instar larvae were 104.80 and 269.15 ppm respectively. The methanolic extract tested at 100 ppm decreased the α-β carboxylesterase and SOD ratio significantly and upregulated the GST and CYP450 level. The A. salvifolium methanolic extract displayed significant repellent and adulticidal activity at 100 and 400 ppm respectively. The treatment with 100 ppm of the methanolic extract led to 210 min of protection from Ae. aegypti bites. Four hundred parts per million of the extract showed 98% adult mortality within 30 min from the treatment. Lastly, biosafety assays on the mosquito aquatic predator Tx. splendens showed that the toxicity of the A. salvifolium extract was significantly lower if compared to the cypermethrin-based treatments. The methanolic extract of A. salvifolium showed a maximum of 47.3% mortality rate at the concentration of 1000 ppm, while 0.7 ppm of cypermethrin achieved 91.3% mortality rate on Tx. splendens. Overall, our study enhances basic knowledge on how to improve natural larvicidal agents against dengue and Zika virus mosquito vector with harmless responses on non-target aquatic predators.

Alternatives for high-level waste forms, containers, and container processing systems

International Nuclear Information System (INIS)

Crawford, T.W.

1995-01-01

This study evaluates alternatives for high-level waste forms, containers, container processing systems, and onsite interim storage. Glass waste forms considered are cullet, marbles, gems, and monolithic glass. Small and large containers configured with several combinations of overpack confinement and shield casks are evaluated for these waste forms. Onsite interim storage concepts including canister storage building, bore holes, and storage pad were configured with various glass forms and canister alternatives. All favorable options include the monolithic glass production process as the waste form. Of the favorable options the unshielded 4- and 7-canister overpack options have the greatest technical assurance associated with their design concepts due to their process packaging and storage methods. These canisters are 0.68 m and 0.54 m in diameter respectively and 4.57 m tall. Life-cycle costs are not a discriminating factor in most cases, varying typically less than 15 percent

A universal next generation sequencing protocol to generate non-infectious barcoded cDNA libraries from high containment RNA viruses

Science.gov (United States)

Several biosafety level (BSL)-3/4 pathogens are high consequence, single-stranded RNA viruses and their genomes, when introduced into permissive cells, are infectious. Moreover many of these viruses are Select Agents (SAs), and their genomes are also considered SAs. For this reason cDNAs and/or th...

A Review of Laboratory-Acquired Infections in the Asia-Pacific: Understanding Risk and the Need for Improved Biosafety for Veterinary and Zoonotic Diseases

Directory of Open Access Journals (Sweden)

Jarunee Siengsanan-Lamont

2018-03-01

Full Text Available A rapid review was performed to determine (1 the number and causes of reported laboratory-acquired infections (LAI in the Asia-Pacific region; (2 their significance and threat to the community; (3 the primary risk factors associated with LAIs; (4 the consequences in the event of a LAI or pathogen escape; and (5 to make general recommendations regarding biosafety practices for diagnosis and research in the Asia-Pacific region. A search for LAI and zoonoses in the Asia-Pacific region using online search engines revealed a relatively low number of reports. Only 27 LAI reports were published between 1982 and 2016. The most common pathogens associated with LAIs were dengue virus, Arthroderma spp., Brucella spp., Mycobacterium spp., Rickettsia spp., and Shigella spp. Seventy-eight percent (21 out of 27 LAI reports occurred in high-income countries (i.e., Australia, Japan, South Korea, Singapore, and Taiwan where laboratories were likely to comply with international biosafety standards. Two upper-middle income countries (China (2, and Malaysia (2 and one lower-middle income country (India (2 reported LAI incidents. The majority of the reports (fifty-two percent (14/27 of LAIs occurred in research laboratories. Five LAI reports were from clinical or diagnostic laboratories that are considered at the frontier for zoonotic disease detection. Governments and laboratories in the Asia-Pacific region should be encouraged to report LAI cases as it provides a useful tool to monitor unintended release of zoonotic pathogens and to further improve laboratory biosafety. Non-reporting of LAI events could pose a risk of disease transmission from infected laboratory staff to communities and the environment. The international community has an important and continuing role to play in supporting laboratories in the Asia-Pacific region to ensure that they maintain the safe working environment for the staff and their families, and the wider community.

DESIGN ANALYSIS FOR THE DEFENSE HIGH-LEVEL WASTE DISPOSAL CONTAINER

International Nuclear Information System (INIS)

Radulesscu, G.; Tang, J.S.

2000-01-01

The purpose of ''Design Analysis for the Defense High-Level Waste Disposal Container'' analysis is to technically define the defense high-level waste (DHLW) disposal container/waste package using the Waste Package Department's (WPD) design methods, as documented in ''Waste Package Design Methodology Report'' (CRWMS M andO [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000a). The DHLW disposal container is intended for disposal of commercial high-level waste (HLW) and DHLW (including immobilized plutonium waste forms), placed within disposable canisters. The U.S. Department of Energy (DOE)-managed spent nuclear fuel (SNF) in disposable canisters may also be placed in a DHLW disposal container along with HLW forms. The objective of this analysis is to demonstrate that the DHLW disposal container/waste package satisfies the project requirements, as embodied in Defense High Level Waste Disposal Container System Description Document (SDD) (CRWMS M andO 1999a), and additional criteria, as identified in Waste Package Design Sensitivity Report (CRWMS M andQ 2000b, Table 4). The analysis briefly describes the analytical methods appropriate for the design of the DHLW disposal contained waste package, and summarizes the results of the calculations that illustrate the analytical methods. However, the analysis is limited to the calculations selected for the DHLW disposal container in support of the Site Recommendation (SR) (CRWMS M andO 2000b, Section 7). The scope of this analysis is restricted to the design of the codisposal waste package of the Savannah River Site (SRS) DHLW glass canisters and the Training, Research, Isotopes General Atomics (TRIGA) SNF loaded in a short 18-in.-outer diameter (OD) DOE standardized SNF canister. This waste package is representative of the waste packages that consist of the DHLW disposal container, the DHLW/HLW glass canisters, and the DOE-managed SNF in disposable canisters. The intended use of this

DESIGN ANALYSIS FOR THE DEFENSE HIGH-LEVEL WASTE DISPOSAL CONTAINER

Energy Technology Data Exchange (ETDEWEB)

G. Radulesscu; J.S. Tang

2000-06-07

The purpose of ''Design Analysis for the Defense High-Level Waste Disposal Container'' analysis is to technically define the defense high-level waste (DHLW) disposal container/waste package using the Waste Package Department's (WPD) design methods, as documented in ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000a). The DHLW disposal container is intended for disposal of commercial high-level waste (HLW) and DHLW (including immobilized plutonium waste forms), placed within disposable canisters. The U.S. Department of Energy (DOE)-managed spent nuclear fuel (SNF) in disposable canisters may also be placed in a DHLW disposal container along with HLW forms. The objective of this analysis is to demonstrate that the DHLW disposal container/waste package satisfies the project requirements, as embodied in Defense High Level Waste Disposal Container System Description Document (SDD) (CRWMS M&O 1999a), and additional criteria, as identified in Waste Package Design Sensitivity Report (CRWMS M&Q 2000b, Table 4). The analysis briefly describes the analytical methods appropriate for the design of the DHLW disposal contained waste package, and summarizes the results of the calculations that illustrate the analytical methods. However, the analysis is limited to the calculations selected for the DHLW disposal container in support of the Site Recommendation (SR) (CRWMS M&O 2000b, Section 7). The scope of this analysis is restricted to the design of the codisposal waste package of the Savannah River Site (SRS) DHLW glass canisters and the Training, Research, Isotopes General Atomics (TRIGA) SNF loaded in a short 18-in.-outer diameter (OD) DOE standardized SNF canister. This waste package is representative of the waste packages that consist of the DHLW disposal container, the DHLW/HLW glass canisters, and the DOE-managed SNF in disposable

Biosafety of the Novel Vancomycin-loaded Bone-like Hydroxyapatite/Poly-amino Acid Bony Scaffold

Directory of Open Access Journals (Sweden)

Zhi-Dong Cao

2016-01-01

Full Text Available Background: Recently, local sustained-release antibiotics systems have been developed because they can increase local foci of concentrated antibiotics without increasing the plasma concentration, and thereby effectively decrease any systemic toxicity and side effects. A vancomycin-loaded bone-like hydroxyapatite/poly-amino acid (V-BHA/PAA bony scaffold was successfully fabricated with vancomycin-loaded poly lactic-co-glycolic acid microspheres and BHA/PAA, which was demonstrated to exhibit both porosity and perfect biodegradability. The aim of this study was to systematically evaluate the biosafety of this novel scaffold by conducting toxicity tests in vitro and in vivo. Methods: According to the ISO rules for medical implant biosafety, for in vitro tests, the scaffold was incubated with L929 fibroblasts or rabbit noncoagulant blood, with simultaneous creation of positive control and negative control groups. The growth condition of L929 cells and hemolytic ratio were respectively evaluated after various incubation periods. For in vivo tests, a chronic osteomyelitis model involving the right proximal tibia of New Zealand white rabbits was established. After bacterial identification, the drug-loaded scaffold, drug-unloaded BHA/PAA, and poly (methyl methacrylate were implanted, and a blank control group was also set up. Subsequently, the in vivo blood drug concentrations were measured, and the kidney and liver functions were evaluated. Results: In the in vitro tests, the cytotoxicity grades of V-BHA/PAA and BHA/PAA-based on the relative growth rate were all below 1. The hemolysis ratios of V-BHA/PAA and BHA/PAA were 2.27% and 1.42%, respectively, both below 5%. In the in vivo tests, the blood concentration of vancomycin after implantation of V-BHA/PAA was measured at far below its toxic concentration (60 mg/L, and the function and histomorphology of the liver and kidney were all normal. Conclusion: According to ISO standards, the V-BHA/PAA scaffold

Defense High Level Waste Disposal Container System Description Document

International Nuclear Information System (INIS)

2000-01-01

The Defense High Level Waste Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the accesses using a rail mounted transporter, and emplaced in emplacement drifts. The defense high level waste (HLW) disposal container provides long-term confinement of the commercial HLW and defense HLW (including immobilized plutonium waste forms (IPWF)) placed within disposable canisters, and withstands the loading, transfer, emplacement, and retrieval loads and environments. U.S. Department of Energy (DOE)-owned spent nuclear fuel (SNF) in disposable canisters may also be placed in a defense HLW disposal container along with commercial HLW waste forms, which is known as 'co-disposal'. The Defense High Level Waste Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container/waste package maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual canister temperatures after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Defense HLW disposal containers for HLW disposal will hold up to five HLW canisters. Defense HLW disposal containers for co-disposal will hold up to five HLW canisters arranged in a ring and one DOE SNF canister in the ring. Defense HLW disposal containers also will hold two Multi-Canister Overpacks (MCOs) and two HLW canisters in one disposal container. The disposal container will include outer and inner cylinders, outer and inner cylinder lids, and may include a canister guide. An exterior label will provide a means by which to identify the disposal container and its contents. Different materials

Assessing biosafety of GM plants containing lectins

DEFF Research Database (Denmark)

Poulsen, Morten; Pedersen, Jan W.

2010-01-01

insects. However, since the cry genes are not active against all insects, e.g. sap-sucking insects, other genes coding for proteins such as lectins show promise of complementing the cry genes for insect resistance. As with other novel plants, lectin-expressing plants will need to be assessed...... for their potential risks to human and animal health and the environment. The expressed lectin protein should be assessed on its own for potential toxicity and allergenicity as for any other new protein. Although not many lectins have been thoroughly tested for their toxicity, our evaluation suggests that most...... of the lectins that are potentially useful for insect resistance will pose no health risk in genetically modified (GM) plants. Since some lectins are known for their toxicity to humans, the insertion of lectin genes in food crop plants will have to be assessed carefully. It is expected that in some cases...

Novel GMO-Based Vaccines against Tuberculosis: State of the Art and Biosafety Considerations.

Science.gov (United States)

Leunda, Amaya; Baldo, Aline; Goossens, Martine; Huygen, Kris; Herman, Philippe; Romano, Marta

2014-06-16

Novel efficient vaccines are needed to control tuberculosis (TB), a major cause of morbidity and mortality worldwide. Several TB vaccine candidates are currently in clinical and preclinical development. They fall into two categories, the one of candidates designed as a replacement of the Bacille Calmette Guérin (BCG) to be administered to infants and the one of sub-unit vaccines designed as booster vaccines. The latter are designed as vaccines that will be administered to individuals already vaccinated with BCG (or in the future with a BCG replacement vaccine). In this review we provide up to date information on novel tuberculosis (TB) vaccines in development focusing on the risk assessment of candidates composed of genetically modified organisms (GMO) which are currently evaluated in clinical trials. Indeed, these vaccines administered to volunteers raise biosafety concerns with respect to human health and the environment that need to be assessed and managed.

Serum aluminium levels in glue-sniffer adolescent and in glue containers.

Science.gov (United States)

Akay, Cemal; Kalman, Süleyman; Dündaröz, Ruşen; Sayal, Ahmet; Aydin, Ahmet; Ozkan, Yalçin; Gül, Hüsamettin

2008-05-01

Glue sniffing is a serious medical problem among teenagers. Various chemical substances such as toluene and benzene containing glues have been reported to be toxic. It has been demonstrated that some toxic metals such as lead are elevated in the blood of solvent-addicted patients. Whereas aluminium is an element that has toxic effects on neurological, hematopoetic system and bone metabolism. We want to determine the serum levels of aluminium in glue-sniffer adolescents in comparison with healthy subjects. In addition, we compared aluminium levels of different commercial glue preparations (i.e. metal and plastic containers), to determine which type of container is better for less aluminium toxicity. We measured serum levels of aluminium in 37 glue-sniffer and 37 healthy subjects using atomic absorption spectrophotometry. The average duration of glue-sniffer was 3.8 +/- 0.8 years. We also measured aluminium levels of 10 commercial glue preparations that seven of them with metal and three with plastic containers. We found that serum levels of aluminium were 63.29 +/- 13.20 ng/ml and 36.7 +/- 8.60 ng/ml in glue-sniffer and in control subjects, respectively (P sniffers, it may be a good step to market of glue preparations in plastic instead of metal containers.

The 10th International Symposium on the Biosafety of Genetically Modified Organisms (ISBGMO), Wellington, New Zealand, November 2008.

Science.gov (United States)

Sweet, Jeremy

2009-01-01

The Symposium consisted of eight sessions of oral presentations as well as various workshops and poster sessions. This report reviews the presentations in the following sessions and discusses the main conclusions and issues arising from each session: Session 1: Biosafety - experience and results Session 2: Introgression, invasion and fitness Session 3: Biotic and abiotic stress resistance Session 4: GM animals Session 5: Effects of GM crops on soil ecosystems Session 7: Biocontainment methods Session 8: Post market environmental monitoring Abstracts of the presentations in these sessions are available at: http://www.isbgmo.info/assets_/isbgmo_symposium_handbook.pdf.

System for indicating the level of material in a container

International Nuclear Information System (INIS)

Erb, T.L.

1980-01-01

In a radiation detecting system for controlling the level of material in a container, the first counter accumulates pulses generated by a geiger tube at a rate related to the level of material and a second counter accumulates clock pulses. A race condition is established between a NAND circuit indicating that the first counter has reached a predetermined total, and a NAND circuit indicating that the second counter has reached a second predetermined total representing a fixed counting interval. The first NAND circuit to respond to its predetermined total actuates a circuit to reset both counters and, if indicative of the material level being below a predetermined minimum, actuates an alarm or operates a control circuit to add material to the container. In the example shown, an additional NAND circuit responds to a different count in the first counter which count in the same time interval corresponds to a higher level, and when material is being added to the container, the race condition is between two NAND circuits. The effect of this is to provide a hysteresis effect preventing the circuit from 'hunting' around one level of material. (author)

Next generation inactivated polio vaccine manufacturing to support post polio-eradication biosafety goals.

Directory of Open Access Journals (Sweden)

Yvonne E Thomassen

Full Text Available Worldwide efforts to eradicate polio caused a tipping point in polio vaccination strategies. A switch from the oral polio vaccine, which can cause circulating and virulent vaccine derived polioviruses, to inactivated polio vaccines (IPV is scheduled. Moreover, a manufacturing process, using attenuated virus strains instead of wild-type polioviruses, is demanded to enhance worldwide production of IPV, especially in low- and middle income countries. Therefore, development of an IPV from attenuated (Sabin poliovirus strains (sIPV was pursued. Starting from the current IPV production process based on wild type Salk strains, adaptations, such as lower virus cultivation temperature, were implemented. sIPV was produced at industrial scale followed by formulation of both plain and aluminium adjuvanted sIPV. The final products met the quality criteria, were immunogenic in rats, showed no toxicity in rabbits and could be released for testing in the clinic. Concluding, sIPV was developed to manufacturing scale. The technology can be transferred worldwide to support post polio-eradication biosafety goals.

Novel GMO-Based Vaccines against Tuberculosis: State of the Art and Biosafety Considerations

Science.gov (United States)

Leunda, Amaya; Baldo, Aline; Goossens, Martine; Huygen, Kris; Herman, Philippe; Romano, Marta

2014-01-01

Novel efficient vaccines are needed to control tuberculosis (TB), a major cause of morbidity and mortality worldwide. Several TB vaccine candidates are currently in clinical and preclinical development. They fall into two categories, the one of candidates designed as a replacement of the Bacille Calmette Guérin (BCG) to be administered to infants and the one of sub-unit vaccines designed as booster vaccines. The latter are designed as vaccines that will be administered to individuals already vaccinated with BCG (or in the future with a BCG replacement vaccine). In this review we provide up to date information on novel tuberculosis (TB) vaccines in development focusing on the risk assessment of candidates composed of genetically modified organisms (GMO) which are currently evaluated in clinical trials. Indeed, these vaccines administered to volunteers raise biosafety concerns with respect to human health and the environment that need to be assessed and managed. PMID:26344627

Novel GMO-Based Vaccines against Tuberculosis: State of the Art and Biosafety Considerations

Directory of Open Access Journals (Sweden)

Amaya Leunda

2014-06-01

Full Text Available Novel efficient vaccines are needed to control tuberculosis (TB, a major cause of morbidity and mortality worldwide. Several TB vaccine candidates are currently in clinical and preclinical development. They fall into two categories, the one of candidates designed as a replacement of the Bacille Calmette Guérin (BCG to be administered to infants and the one of sub-unit vaccines designed as booster vaccines. The latter are designed as vaccines that will be administered to individuals already vaccinated with BCG (or in the future with a BCG replacement vaccine. In this review we provide up to date information on novel tuberculosis (TB vaccines in development focusing on the risk assessment of candidates composed of genetically modified organisms (GMO which are currently evaluated in clinical trials. Indeed, these vaccines administered to volunteers raise biosafety concerns with respect to human health and the environment that need to be assessed and managed.

CRISPR/Cas9 in insects: Applications, best practices and biosafety concerns.

Science.gov (United States)

Taning, Clauvis Nji Tizi; Van Eynde, Benigna; Yu, Na; Ma, Sanyuan; Smagghe, Guy

2017-04-01

Discovered as a bacterial adaptive immune system, CRISPR/Cas9 (clustered, regularly interspaced, short palindromic repeat/CRISPR associated) is being developed as an attractive tool in genome editing. Due to its high specificity and applicability, CRISPR/Cas9-mediated gene editing has been employed in a multitude of organisms and cells, including insects, for not only fundamental research such as gene function studies, but also applied research such as modification of organisms of economic importance. Despite the rapid increase in the use of CRISPR in insect genome editing, results still differ from each study, principally due to existing differences in experimental parameters, such as the Cas9 and guide RNA form, the delivery method, the target gene and off-target effects. Here, we review current reports on the successes of CRISPR/Cas9 applications in diverse insects and insect cells. We furthermore summarize several best practices to give a useful checklist of CRISPR/Cas9 experimental setup in insects for beginners. Lastly, we discuss the biosafety concerns related to the release of CRISPR/Cas9-edited insects into the environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Radiation levels on empty cylinders containing heel material

Energy Technology Data Exchange (ETDEWEB)

Shockley, C.W. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

1991-12-31

Empty UF{sub 6} cylinders containing heel material were found to emit radiation levels in excess of 200 mr/hr, the maximum amount stated in ORO-651. The radiation levels were as high as 335 mr/hr for thick wall (48X and 48Y) cylinders and 1050 mr/hr for thin wall (48G and 48H) cylinders. The high readings were found only on the bottom of the cylinders. These radiation levels exceeded the maximum levels established in DOT 49 CFR, Part 173.441 for shipment of cylinders. Holding periods of four weeks for thick-wall cylinders and ten weeks for thin-wall cylinders were established to allow the radiation levels to decay prior to shipment.

A Container-based Trusted Multi-level Security Mechanism

Directory of Open Access Journals (Sweden)

Li Xiao-Yong

2017-01-01

Full Text Available Multi-level security mechanism has been widely applied in the military, government, defense and other domains in which information is required to be divided by security-level. Through this type of security mechanism, users at different security levels are provided with information at corresponding security levels. Traditional multi-level security mechanism which depends on the safety of operating system finally proved to be not practical. We propose a container-based trusted multi-level security mechanism in this paper to improve the applicability of the multi-level mechanism. It guarantees multi-level security of the system through a set of multi-level security policy rules and trusted techniques. The technical feasibility and application scenarios are also discussed. The ease of realization, strong practical significance and low cost of our method will largely expand the application of multi-level security mechanism in real life.

Effect of levulose containing sweets on blood and salivary glucose levels.

Science.gov (United States)

Subramaniam, Priya; K L, Girish Babu; Gona, Harsha

2015-06-01

It is common that many diabetic patients crave for sweets which are normally prohibited. To satisfy their desire to have sweets, alternative sweeteners have been introduced to provide sweetness to some items of their diabetic diet. To (1) assess the effect of sweets containing levulose on glucose levels in blood and saliva, and (2) compare it with effect of sweets containing sucrose on blood and saliva levels of glucose. The study consisted of 20 healthy participants, aged 17-20 years. Two sweet preparations of 36 g each were selected for the study. One preparation was sweetened with levulose (diabetic sweet; Group I) and the other with sucrose (regular sweet; Group II). Blood sugar and salivary glucose levels were estimated before and after the consumption of diabetic and regular sweets. The mean increase in salivary glucose level was lower in Group I than in Group II. Similarly, increase in blood glucose levels in Group I was lower and highly significant. In comparison with regular sweets, consumption of levulose containing sweet resulted in significantly lower blood and salivary glucose levels.

Medidas de bioseguridad adoptadas en el manejo con materiales biológicos en Laboratorios Liorad Biosafety measures adopted in Liorad Laboratories for handling biological materials

Directory of Open Access Journals (Sweden)

Nancy Burguet Lago

2013-03-01

Full Text Available Introducción: el trabajo con microorganismos puede conllevar a riesgos tanto para el personal que trabaja con los mismos como para el medio ambiente. La existencia de laboratorios de seguridad biológica y la implementación de medidas en la manipulación de los agentes biológicos minimizan el riesgo. Objetivo: evaluar las medidas de bioseguridad adoptadas en el manejo con materiales biológicos en Laboratorios Liorad. Métodos: empleo de una lista de chequeo y análisis de los resultados a través de una Matriz DAFO para valorar si el diseño de la instalación cumple con la bioseguridad. Además establecer un sistema documental para la manipulación de microorganismos y la confección de un plan de capacitación para el personal que trabaja en el laboratorio de control microbiológico. Resultados: la lista de chequeo permitió identificar como principal debilidad el no disponer de un doble pasillo para el traslado del material limpio y sucio. Como fortalezas, cumplir con las prácticas y procesamientos adecuados y el contar con equipos de seguridad biológica. El sistema documental incorporó a los procedimientos establecidos para la manipulación, un acápite referido a la «Peligrosidad y Medidas de Seguridad». El programa de capacitación desarrollado permitió proveer conocimientos específicos referidos a esta temática. Conclusión: las medidas adoptadas en el laboratorio permiten plantear que de manera general se cumplen los requisitos establecidos en materia de Bioseguridad para el trabajo con microorganismos.Introduction: working with microorganisms can lead to risks for both the staff at work and the environment. The existence of biosafety labs and implementation of measures in the handling of biological agents minimize the risk. Objetive: to evaluate biosecurity measures taken in handling biological materials at Liorad Laboratories. Methods: using a checklist and analysis of results through a SWOT Matrix to assess whether the

A estruturação do Programa de Capacitação Profissional de Biossegurança no contexto do Projeto de Modernização da Gestão Científica do Instituto Oswaldo Cruz Development of a Biosafety Training Program aligned with the Scientific Management Modernization Project of the Oswaldo Cruz Institute

Directory of Open Access Journals (Sweden)

Maria Eveline de Castro Pereira

2010-06-01

Scientific Management Modernization Project of IOC. The program, including the "Biosafety Course in Biomedical Research Laboratory", was structured according to the planning-development-evaluation cycle. Initially, for the diagnosis cycle, the IOC laboratories representatives answered a questionnaire that showed that both professional categories (middle and higher levels were interested in participating in BTP and mentioned, as preferential themes, biosafety and good laboratory practices. In the planning phase it was defined that BTP would be divided into two projects (Good Laboratory Practices in Public Health for middle level professionals and Biosafety Course in Biomedical Research Laboratories for higher level professionals. During the development phase of the Biosafety Course, the following modules were chosen: introduction, chemical, physical and biological risks, quality management and animal experimentation. Thus, in the period from 2006 to 2008, 315 professionals were trained and the respective evaluations were performed according to David Kirkpatrick's model. The first level of evaluation, called reaction, showed that 54.03% of the professionals said that the course was excellent, 39.59% classified the course as good and 6.38% as regular or did not express any opinion. For learning evaluation, pre and post-tests were carried out in each module. All the modules showed an increase in the grades of the post-test when compared to the pre-test. The results pointed to strategies that should be followed in order to improve this biosafety continuing education model.

Indonesian perceptions on the implementation of the chemical weapons convention in relation with biosecurity and biosafety

International Nuclear Information System (INIS)

Isroil, S.

2009-01-01

April 29, 2007 was marked the 10 year anniversary of the Chemical Weapons Convention (CWC) entry into force and the creation of the OPCW. Many nations throughout the last year were celebrated its commemoration. Compared to the Biological Weapons Convention (BWC) which is now entering the 33rd year of its entry into force, the progress of CWC is running far beyond that convention because CWC is considered the most complete convention which is equipped with a comprehensive verification system. In contrast, up till now there is no formal verification regime to monitor compliance of the BWC. So the national legislation as well as biosafety and biosecurity procedures will be the best regime to prohibit the misuse of biological agents. To some extent, the strategy and method on implementing the provision of CWC are coincident with biosecurity and biosafety procedure due to their dual use characteristics. Concerning CWC, Indonesia which was ratified it in 30 September 1998 has always active in any multilateral meeting and as well as national activities on prohibiting the misuse of chemical weapons. Several courses have also been done in cooperation with OPCW such as Development of Response System Against Chemical Weapons, Basic Training Course for Response Team, National Industry Awareness Workshop, Advance Training for Response Team, National Emergency Response Workshop, as well as setting up 20 sets of individual protective equipment. There have already 7 inspections done by OPCW in Indonesia during 2004-2007 which proved that there were no indications of misuse of chemical processes and its facilities for hostile purposes. However, it does not mean that there is no threat from the possible misuse of chemical and biological agents due to its dual use characteristics. Learnt from Indonesian experiences, there are several constraints on implementing the CWC as well as biosafety and biosecurity. First is the different perception on the biological and chemical threats. For

Newly developed chitosan-silver hybrid nanoparticles: biosafety and apoptosis induction in HepG2 cells

International Nuclear Information System (INIS)

El-Sherbiny, Ibrahim M.; Salih, Ehab; Yassin, Abdelrahman M.; Hafez, Elsayed E.

2016-01-01

The present study reports the biosafety assessment, the exact molecular effects, and apoptosis induction of newly developed chitosan-silver hybrid nanoparticles (Cs–Ag NPs) in HepG2 cells. The investigated hybrid NPs were green synthesized using Cs/grape leaves aqueous extract (Cs/GLE) or Cs/GLE NPs as reducing and stabilizing agents. The successful formation of Cs/GLE NPs and Cs–Ag hybrid NPs has been confirmed by UV–Vis spectrophotometry, FTIR spectroscopy, XRD, and HRTEM. From the TEM analysis, the prepared Cs/GLE NPs are uniform and spherical with an average size of 150 nm, and the AgNPs (5–10 nm) were formed mainly on their surface. The UV–Vis spectra of Cs–Ag NPs showed a surface plasmon resonance (SPR) peak at about 450 nm confirming their formation. The synthesized Cs–Ag NPs were found to be crystalline as shown by XRD patterns with fcc phase oriented along the (111), (200), (220), and (311) planes. The cytotoxicity patterns, the antiproliferative activities, and the possible mechanisms of anticancer activity at molecular level of the newly developed Cs–Ag hybrid NPs were investigated. Cytotoxicity patterns of all the preparations demonstrated that the nontoxic treatment concentrations are ranged from 0.39 to 50 %, and many of the newly prepared Cs–Ag hybrid NPs showed high anticancer activities against HpG2 cells, and induced cellular apoptosis by downregulating BCL2 gene and upregulating P53.Graphical Abstract

Newly developed chitosan-silver hybrid nanoparticles: biosafety and apoptosis induction in HepG2 cells

Energy Technology Data Exchange (ETDEWEB)

El-Sherbiny, Ibrahim M., E-mail: ielsherbiny@Zewailcity.edu.eg; Salih, Ehab [Zewail City of Science and Technology, Center for Materials Science (Egypt); Yassin, Abdelrahman M. [Genetic Engineering and Biotechnology Research Institute, City of Scientific Research and Technology Applications, Biopharmaceutical Product Research Department (Egypt); Hafez, Elsayed E. [City of Scientific Research and Technology Applications, Plant Protection and Biomolecular Diagnosis Department (Egypt)

2016-07-15

The present study reports the biosafety assessment, the exact molecular effects, and apoptosis induction of newly developed chitosan-silver hybrid nanoparticles (Cs–Ag NPs) in HepG2 cells. The investigated hybrid NPs were green synthesized using Cs/grape leaves aqueous extract (Cs/GLE) or Cs/GLE NPs as reducing and stabilizing agents. The successful formation of Cs/GLE NPs and Cs–Ag hybrid NPs has been confirmed by UV–Vis spectrophotometry, FTIR spectroscopy, XRD, and HRTEM. From the TEM analysis, the prepared Cs/GLE NPs are uniform and spherical with an average size of 150 nm, and the AgNPs (5–10 nm) were formed mainly on their surface. The UV–Vis spectra of Cs–Ag NPs showed a surface plasmon resonance (SPR) peak at about 450 nm confirming their formation. The synthesized Cs–Ag NPs were found to be crystalline as shown by XRD patterns with fcc phase oriented along the (111), (200), (220), and (311) planes. The cytotoxicity patterns, the antiproliferative activities, and the possible mechanisms of anticancer activity at molecular level of the newly developed Cs–Ag hybrid NPs were investigated. Cytotoxicity patterns of all the preparations demonstrated that the nontoxic treatment concentrations are ranged from 0.39 to 50 %, and many of the newly prepared Cs–Ag hybrid NPs showed high anticancer activities against HpG2 cells, and induced cellular apoptosis by downregulating BCL2 gene and upregulating P53.Graphical Abstract.

CT findings of a unicameral calcaneal bone cyst containing a fluid-fluid level.

Science.gov (United States)

Gallagher, Thomas A; Lim-Dunham, Jennifer E; Vade, Aruna

2007-03-01

Calcaneal unicameral bone cysts often contain fluid, but rarely contain fluid-fluid levels. We present a case focusing on the CT findings of a large calcaneal bone cyst with a fluid-fluid level and a review of the literature.

Evaluating the efficacy of hydrogen peroxide vapour against foot-and-mouth disease virus within a BSL4 biosafety facility.

Science.gov (United States)

Petit, B M; Almeida, F C; Uchiyama, T R; Lopes, F O C; Tino, K H; Chewins, J

2017-10-01

An evaluation was made of the efficacy of 35% hydrogen peroxide vapour (HPV) against foot-and-mouth disease virus (FMDV) in a biosafety facility. Biological indicators (BIs) were produced using three serotypes of FMDV, all with a titre of ≥10 6 TCID 50 per ml. Fifteen BIs of each serotype were distributed across five locations, throughout a 30-m 3 airlock chamber, producing a total of 45 BIs. Thirty-five percent HPV was generated and applied using a Bioquell vaporization module located in the centre of the chamber. After a dwell period of 40 min, the HPV was removed via the enclosures air handling system and the BIs were collected. The surfaces of the BIs were recovered into Glasgow's modified Eagle's medium (GMEM), cultivated in BHK21 Cl13 cell culture and analysed for evidence of cytopathic effect (CPE). No CPE was detected in any BI sample. Positive controls showed CPE. The experimentation shows that FMDV is susceptible to HPV decontamination and presents a potential alternative to formaldehyde. Foot-and-mouth disease virus (FMDV) is an important pathogen in terms of biosafety due to its infectious nature and wide range of host animals, such as cattle, sheep, goats and pigs. Outbreaks of FMDV can have a severe impact on livestock production, causing morbidity, mortality, reduced yields and trade embargoes. Laboratories studying FMDV must possess BSL4 robust bio-decontamination methods to prevent inadvertent release. Formaldehyde has been the primary agent for environmental decontamination, but its designation as a human carcinogen has led to a search for alternatives. This study shows 35% hydrogen peroxide vapour has the potential to be a rapid, effective, residue-free alternative. © 2017 The Society for Applied Microbiology.

Genomic misconception: a fresh look at the biosafety of transgenic and conventional crops. A plea for a process agnostic regulation.

Science.gov (United States)

Ammann, Klaus

2014-01-25

The regulation of genetically engineered crops, in Europe and within the legislation of the Cartagena biosafety protocol is built on false premises: The claim was (and unfortunately still is) that there is a basic difference between conventional and transgenic crops, this despite the fact that this has been rejected on scientifically solid grounds since many years. This contribution collects some major arguments for a fresh look at regulation of transgenic crops, they are in their molecular processes of creation not basically different from conventional crops, which are based in their breeding methods on natural, sometimes enhanced mutation. But the fascination and euphoria of the discoveries in molecular biology and the new perspectives in plant breeding in the sixties and seventies led to the wrong focus on transgenic plants alone. In a collective framing process the initial biosafety debates focused on the novelty of the process of transgenesis. When early debates on the risk assessment merged into legislative decisions, this wrong focus on transgenesis alone seemed uncontested. The process-focused view was also fostered by a conglomerate of concerned scientists and biotechnology companies, both with a vested interest to at least tolerate the rise of the safety threshold to secure research money and to discourage competitors of all kinds. Policy minded people and opponent activists without deeper insight in the molecular science agreed to those efforts without much resistance. It is interesting to realize, that the focus on processes was uncontested by a majority of regulators, this despite of serious early warnings from important authorities in science, mainly of US origin. It is time to change the regulation of genetically modified (GM) crops toward a more science based process-agnostic legislation. Although this article concentrates on the critique of the process-oriented regulation, including some details about the history behind, there should be no

Containers for packaging of solid and intermediate level radioactive wastes

International Nuclear Information System (INIS)

1993-01-01

Low and intermediate level radioactive wastes are generated at all stages in the nuclear fuel cycle and also from the medical, industrial and research applications of radiation. These wastes can potentially present risks to health and the environment if they are not managed adequately. Their effective management will require the wastes to be safely stored, transported and ultimately disposed of. The waste container, which may be defined as any vessel, drum or box, made from metals, concrete, polymers or composite materials, in which the waste form is placed for interim storage, for transport and/or for final disposal, is an integral part of the whole package for the management of low and intermediate level wastes. It has key roles to play in several stages of the waste management process, starting from the storage of raw wastes and ending with the disposal of conditioned wastes. This report provides an overview of the various roles that a container may play and the factors that are important in each of these roles. This report has two main objectives. The first is to review the main requirements for the design of waste containers. The second is to provide advice on the design, fabrication and handling of different types of containers used in the management of low and intermediate level radioactive solid wastes. Recommendations for design and testing are given, based on the extensive experience available worldwide in waste management. This report is not intended to have any regulatory status or objectives. 56 refs, 16 figs, 10 tabs

Agrobacterium-mediated gene transfer in plants and biosafety considerations.

Science.gov (United States)

Mehrotra, Shweta; Goyal, Vinod

2012-12-01

Agrobacterium, the natures' genetic engineer, has been used as a vector to create transgenic plants. Agrobacterium-mediated gene transfer in plants is a highly efficient transformation process which is governed by various factors including genotype of the host plant, explant, vector, plasmid, bacterial strain, composition of culture medium, tissue damage, and temperature of co-cultivation. Agrobacterium has been successfully used to transform various economically and horticulturally important monocot and dicot species by standard tissue culture and in planta transformation techniques like floral or seedling infilteration, apical meristem transformation, and the pistil drip methods. Monocots have been comparatively difficult to transform by Agrobacterium. However, successful transformations have been reported in the last few years based on the adjustment of the parameters that govern the responses of monocots to Agrobacterium. A novel Agrobacterium transferred DNA-derived nanocomplex method has been developed which will be highly valuable for plant biology and biotechnology. Agrobacterium-mediated genetic transformation is known to be the preferred method of creating transgenic plants from a commercial and biosafety perspective. Agrobacterium-mediated gene transfer predominantly results in the integration of foreign genes at a single locus in the host plant, without associated vector backbone and is also known to produce marker free plants, which are the prerequisites for commercialization of transgenic crops. Research in Agrobacterium-mediated transformation can provide new and novel insights into the understanding of the regulatory process controlling molecular, cellular, biochemical, physiological, and developmental processes occurring during Agrobacterium-mediated transformation and also into a wide range of aspects on biological safety of transgenic crops to improve crop production to meet the demands of ever-growing world's population.

Immobilization of INEL low-level radioactive wastes in ceramic containment materials

International Nuclear Information System (INIS)

Seymour, W.C.; Kelsey, P.V.

1978-11-01

INEL low-level radioactive wastes have an overall chemical composition that lends itself to self-containment in a ceramic-based material. Fewer chemical additives would be needed to process the wastes than to process high-level wastes or use a mixture containment method. The resulting forms of waste material could include a basalt-type glass or glass ceramic and a ceramic-type brick. Expected leach resistance is discussed in relationshp to data found in the literature for these materials and appears encouraging. An overview of possible processing steps for the ceramic materials is presented

Recommendations for Laboratory Containment and Management of Gene Drive Systems in Arthropods.

Science.gov (United States)

Benedict, Mark Q; Burt, Austin; Capurro, Margareth L; De Barro, Paul; Handler, Alfred M; Hayes, Keith R; Marshall, John M; Tabachnick, Walter J; Adelman, Zach N

2018-01-01

Versatile molecular tools for creating driving transgenes and other invasive genetic factors present regulatory, ethical, and environmental challenges that should be addressed to ensure their safe use. In this article, we discuss driving transgenes and invasive genetic factors that can potentially spread after their introduction into a small proportion of individuals in a population. The potential of invasive genetic factors to increase their number in natural populations presents challenges that require additional safety measures not provided by previous recommendations regarding accidental release of arthropods. In addition to providing physical containment, invasive genetic factors require greater attention to strain management, including their distribution and identity confirmation. In this study, we focus on insects containing such factors with recommendations for investigators who are creating them, institutional biosafety committees charged with ensuring safety, funding agencies providing support, those managing insectaries handling these materials who are responsible for containment, and other persons who will be receiving insects-transgenic or not-from these facilities. We give specific examples of efforts to modify mosquitoes for mosquito-borne disease control, but similar considerations are relevant to other arthropods that are important to human health, the environment, and agriculture.

Influence of Herbal Complexes Containing Licorice on Potassium Levels: A Retrospective Study

Directory of Open Access Journals (Sweden)

WooSang Jung

2014-01-01

Full Text Available To observe the influence of these complexes on potassium levels in a clinical setting, we investigated the influence of herbal complexes containing licorice on potassium levels. We retrospectively examined the medical records of patients treated with herbal complexes containing licorice from January 1, 2010, to December 31, 2010. We recorded the changes in the levels of potassium, creatinine, and blood urea nitrogen and examined the differences between before and after herbal complexes intake using a paired t-test. In addition, we investigated the prevalence of hypokalemia among these patients and reviewed such patients. We identified 360 patients who did not show significant changes in the levels of potassium and creatinine (P=0.815, 0.289. We observed hypokalemia in 6 patients. However, in 5 patients, the hypokalemia did not appear to be related to the licorice. Thus, we could suggest that herbal complexes containing licorice do not significantly influence the potassium levels in routine clinical herbal therapies. However, we propose that follow-up examination for potassium levels is required to prevent any unpredictable side effects of administration of licorice in routine herbal medicine care.

Entomotoxicity and biosafety assessment of PEGylated acephate nanoparticles: a biologically safe alternative to neurotoxic pesticides.

Science.gov (United States)

Pradhan, Saheli; Roy, Indrani; Lodh, Gopal; Patra, Prasun; Choudhury, Samrat Roy; Samanta, Arunava; Goswami, Arunava

2013-01-01

This is a report of an experimental study on a nanoencapsulation of the organophosphate acephate. Acephate was encapsulated in polyethylene glycol, using a simple, easy-to-replicate method that required no special equipment or conditions. The nanoencapsulation (nanoacephate) was characterized and its bioefficacy as compared to the regular commercial acephate was tested. The biosafety of the new compound was also tested on a murine model. Our new nanoencapsulation scored over the regular variety on all counts. It was found to successfully incorporate the active pesticidal component, acephate and this compound retained greater functional integrity over time as a nanoencapsulation. It was significantly more efficacious than the regular variety. It was biosafe when tested on murine model. We have reason to believe that this nanoencapsulation would allow the use of an organophosphate in a more targeted manner, thereby making it a cost-effective and eco-friendly alternative to the regular variety in use now.

Princípios de biossegurança aplicados aos laboratórios de ensino universitário de microbiologia e parasitologia Principles of biosafety applied to microbiology and parasitology laboratories in universities

Directory of Open Access Journals (Sweden)

Luis Antônio Sangioni

2013-01-01

well as able to practice them properly to ensure the safety of all professionals, academics and the environment. This article compiles the main aspects related to the principles of biosafety, risk classification of biological agents and levels of biocontainment, and addresses the issues regarding safety equipment and good laboratory practices applied to the teaching laboratories in microbiology and parasitology.

Safety (management and technology). Reality of biosafety technology; Anzen (manejimento to tekunoroji). Baio/sefuti gijutsu no jissai

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, H. [Chiyoda Technoace Co. Ltd., Yokohama (Japan)

1994-08-05

Biosafety, in other words, biohazard countermeasure is to prevent biological disasters, in particular, hazards caused by microbes infecting human beings or things, and they are roughly classified into two kinds. One is a disaster of infection via pathogenic microbes originally existing in the nature or allergens and toxins which microbes produce. The other is a potential, unknown hazards in the field of so-called biotechnology such as gene recombination technology. This paper describes the features of microbe pollution and measures against biohazard. The basis of the biohazard countermeasures is isolation from microbe pollution, and in reality confinement of microbes. As to methods for confining microbes, in addition to physical confinement, there is a biological confinement method using a host-vector system which is hard to exist in conditions other than special incubating conditions in recombination DNA experiments. 3 refs., 3 figs., 2 tabs.

Heat transfer effects in vertically emplaced high level nuclear waste container

International Nuclear Information System (INIS)

Moujaes, S.F.; Lei, Y.M.

1994-01-01

Modeling free convection heat transfer in an cylindrical annular enclosure is still an active area of research and an important problem to be addressed in the high level nuclear waste repository. For the vertically emplaced waste container, the air gap which is between the container shell and the rock borehole, have an important role of dissipating heat to surrounding rack. These waste containers are vertically emplaced in the borehole 300 meters below ground, and in a horizontal grid of 30 x 8 meters apart. The borehole will be capped after the container emplacement. The expected initial heat generated is between 3--4.74 kW per container depending on the type of waste. The goal of this study is to use a computer simulation model to find the borehole wall, air-gap and the container outer wall temperature distributions

Requirements for facilities transferring or receiving select agents. Final rule.

Science.gov (United States)

2001-08-31

CDC administers regulations that govern the transfer of certain biological agents and toxins ("select agents"). These regulations require entities that transfer or receive select agents to register with CDC and comply with biosafety standards contained in the Third Edition of the CDC/NIH publication "Biosafety in Microbiological and Biomedical Laboratories ("BMBL")." On October 28,1999, CDC published a Notice of Proposed Rulemaking ("NPRM") seeking both to revise the biosafety standards facilities must follow when handling select agents and to provide new biosecurity standards for such facilities. These new standards are contained in the Fourth Edition of BMBL, which the NPRM proposed to incorporate by reference, thereby replacing the Third Edition. No comments were received in response to this proposal. CDC is therefore amending its regulations to incorporate the Fourth Edition.

[Mobile laboratories for rapid deployment and their contribution to the containment of emerging diseases in Sub-Saharan Africa, illustrated by the example of Ebola virus disease].

Science.gov (United States)

Diers, J; Kouriba, B; Ladan Fofana, L; Fleischmann, E; Starke, M; Diallo, S; Babin, F-X; von Bonin, J; Wölfel, R

2015-01-01

The Ebola virus, which became a global health concern in 2014, is an example of an emerging pathogen. Ebola virus disease can only be diagnosed in biosafety level 3 and 4 laboratories, which provide the security required to avoid exposure of both the staff and the environment to the pathogen. These laboratories are often far from the site of outbreaks, which may occur in rural areas or border regions (when the disease is imported from a neighboring country). Rapidly deployable laboratory units can bring the diagnosis closer to the outbreak site and thus significantly shorten the time to delivery of results, thus facilitating epidemic containment. Here we report our experience from the first months of implementation in Mali of a mobile laboratory unit of the same type as the European mobile labs and we describe the workflow in the laboratory as well as the training of its Malian staff. Based on our experience and the reports of other projects, we propose a framework in which these mobile laboratory units can strengthen epidemiological surveillance and contribute to containing outbreaks of emerging diseases in sub-Saharan Africa.

Feasibility of establishing a biosafety level 3 tuberculosis culture laboratory of acceptable quality standards in a resource-limited setting: an experience from Uganda.

Science.gov (United States)

Ssengooba, Willy; Gelderbloem, Sebastian J; Mboowa, Gerald; Wajja, Anne; Namaganda, Carolyn; Musoke, Philippa; Mayanja-Kizza, Harriet; Joloba, Moses Lutaakome

2015-01-15

Despite the recent innovations in tuberculosis (TB) and multi-drug resistant TB (MDR-TB) diagnosis, culture remains vital for difficult-to-diagnose patients, baseline and end-point determination for novel vaccines and drug trials. Herein, we share our experience of establishing a BSL-3 culture facility in Uganda as well as 3-years performance indicators and post-TB vaccine trials (pioneer) and funding experience of sustaining such a facility. Between September 2008 and April 2009, the laboratory was set-up with financial support from external partners. After an initial procedure validation phase in parallel with the National TB Reference Laboratory (NTRL) and legal approvals, the laboratory registered for external quality assessment (EQA) from the NTRL, WHO, National Health Laboratories Services (NHLS), and the College of American Pathologists (CAP). The laboratory also instituted a functional quality management system (QMS). Pioneer funding ended in 2012 and the laboratory remained in self-sustainability mode. The laboratory achieved internationally acceptable standards in both structural and biosafety requirements. Of the 14 patient samples analyzed in the procedural validation phase, agreement for all tests with NTRL was 90% (P 80% in all years from NTRL, CAP, and NHLS, and culture was 100% for CAP panels and above regional average scores for all years with NHLS. Quarterly DST scores from WHO-EQA ranged from 78% to 100% in 2010, 80% to 100% in 2011, and 90 to 100% in 2012. From our experience, it is feasible to set-up a BSL-3 TB culture laboratory with acceptable quality performance standards in resource-limited countries. With the demonstrated quality of work, the laboratory attracted more research groups and post-pioneer funding, which helped to ensure sustainability. The high skilled experts in this research laboratory also continue to provide an excellent resource for the needed national discussion of the laboratory and quality management systems.

Properties of slag concrete for low-level waste containment

International Nuclear Information System (INIS)

Langton, C.A.; Wong, P.B.

1991-01-01

Ground granulated blast furnace slag was incorporated in the concrete mix used for construction of low-level radioactive waste disposal vaults. The vaults were constructed as six 100 x 100 x 25 ft cells with each cell sharing internal walls with the two adjacent cells. The vaults were designed to contain a low-level radioactive wasteform called saltstone and to isolate the saltstone from the environment until the landfill is closed. Closure involves backfilling with native soil, installation of clay cap, and run-off control. The design criteria for the slag-substituted concrete included compressive strength, 4000 psi after 28 days; slump, 6 inch; permeability, less than 10 -7 cm/sec; and effective nitrate, chromium and technetium diffusivities of 10 -8 , 10 -12 and 10 -12 cm 2 /sec, respectively. The reducing capacity of the slag resulted in chemically reducing Cr +6 to Cr +3 and Tc +7 to Tc +4 and subsequent precipitation of the respective hydroxides in the alkaline pore solution. Consequently, the concrete vault enhances containment of otherwise mobile waste ions and contributes to the overall protection of the groundwater at the disposal site

'Becquerel screening' device to automatically measure activity level of contaminated soil in flexible containers

International Nuclear Information System (INIS)

Okada, Hisashi; Yamaguchi, Yoshihisa; Yamamoto, Shuji

2014-01-01

Contaminated soil and incineration ash collected during offsite decontamination work following the accident at the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. is being stored in flexible containers. These containers are managed taking their activity level into account in accordance with the Decontamination Guidelines issued by the Ministry of the Environment. Toshiba has developed the 'Becquerel Screening' device that can automatically measure the activity level of the contents of each flexible container simply by placing the container on a palette, without the need to take samples for analysis from the container. The Becquerel Screening device is expected to contribute not only to improved operational efficiency but also to reduced exposure of operators to radiation, because it eliminates the need for direct contact with contaminated soil and ash. (author)

Nematode 18S rRNA gene is a reliable tool for environmental biosafety assessment of transgenic banana in confined field trials.

Science.gov (United States)

Nakacwa, R; Kiggundu, A; Talwana, H; Namaganda, J; Lilley, C; Tushemereirwe, W; Atkinson, H

2013-10-01

Information on relatedness in nematodes is commonly obtained by DNA sequencing of the ribosomal internal transcribed spacer region. However, the level of diversity at this locus is often insufficient for reliable species differentiation. Recent findings suggest that the sequences of a fragment of the small subunit nuclear ribosomal DNA (18S rRNA or SSU), identify genera of soil nematodes and can also distinguish between species in some cases. A database of soil nematode genera in a Ugandan soil was developed using 18S rRNA sequences of individual nematodes from a GM banana confined field trial site at the National Agricultural Research Laboratories, Kawanda in Uganda. The trial was planted to evaluate transgenic bananas for resistance to black Sigatoka disease. Search for relatedness of the sequences gained with entries in a public genomic database identified a range of 20 different genera and sometimes distinguished species. Molecular markers were designed from the sequence information to underpin nematode faunal analysis. This approach provides bio-indicators for disturbance of the soil environment and the condition of the soil food web. It is being developed to support environmental biosafety analysis by detecting any perturbance by transgenic banana or other GM crops on the soil environment.

Corrosion models for predictions of performance of high-level radioactive-waste containers

Energy Technology Data Exchange (ETDEWEB)

Farmer, J.C.; McCright, R.D. [Lawrence Livermore National Lab., CA (United States); Gdowski, G.E. [KMI Energy Services, Livermore, CA (United States)

1991-11-01

The present plan for disposal of high-level radioactive waste in the US is to seal it in containers before emplacement in a geologic repository. A proposed site at Yucca Mountain, Nevada, is being evaluated for its suitability as a geologic repository. The containers will probably be made of either an austenitic or a copper-based alloy. Models of alloy degradation are being used to predict the long-term performance of the containers under repository conditions. The models are of uniform oxidation and corrosion, localized corrosion, and stress corrosion cracking, and are applicable to worst-case scenarios of container degradation. This paper reviews several of the models.

Mobile/Modular BSL-4 Facilities for Meeting Restricted Earth Return Containment Requirements

Science.gov (United States)

Calaway, M. J.; McCubbin, F. M.; Allton, J. H.; Zeigler, R. A.; Pace, L. F.

2017-01-01

NASA robotic sample return missions designated Category V Restricted Earth Return by the NASA Planetary Protection Office require sample containment and biohazard testing in a receiving laboratory as directed by NASA Procedural Requirement (NPR) 8020.12D - ensuring the preservation and protection of Earth and the sample. Currently, NPR 8020.12D classifies Restricted Earth Return for robotic sample return missions from Mars, Europa, and Enceladus with the caveat that future proposed mission locations could be added or restrictions lifted on a case by case basis as scientific knowledge and understanding of biohazards progresses. Since the 1960s, sample containment from an unknown extraterrestrial biohazard have been related to the highest containment standards and protocols known to modern science. Today, Biosafety Level (BSL) 4 standards and protocols are used to study the most dangerous high-risk diseases and unknown biological agents on Earth. Over 30 BSL-4 facilities have been constructed worldwide with 12 residing in the United States; of theses, 8 are operational. In the last two decades, these brick and mortar facilities have cost in the hundreds of millions of dollars dependent on the facility requirements and size. Previous mission concept studies for constructing a NASA sample receiving facility with an integrated BSL-4 quarantine and biohazard testing facility have also been estimated in the hundreds of millions of dollars. As an alternative option, we have recently conducted an initial trade study for constructing a mobile and/or modular sample containment laboratory that would meet all BSL-4 and planetary protection standards and protocols at a faction of the cost. Mobile and modular BSL-2 and 3 facilities have been successfully constructed and deployed world-wide for government testing of pathogens and pharmaceutical production. Our study showed that a modular BSL-4 construction could result in approximately 90% cost reduction when compared to

《卡塔赫纳生物安全议定书》与WTO规则冲突研究%Study on Conflicts between the Cartagena Protocol on Biosafety and WTO Rules

Institute of Scientific and Technical Information of China (English)

陈海君

2005-01-01

In the late thirty years biotechnology, with transgenic technology as its core，has been developed rapidly and applied in fields such as agriculture and medicine with great achievements， which has caused profound impacts on society and economy, However because of scientific uncertainties of influences of transgenrc technology and derived products on human, plant and animal life and health as well as the environment,biosafety。i.e management of biotechnology so as to minimize its potential risks to the environment and human health, has become an issue with increasing concern of the internatronal community，In this context, negotiation of an international treaty was initiated in 1996 and the Cartagena Protocol on Biosafety was adopted in January 2000 and came into effect in September 2003 ,As the first international treaty containing direct stipulations on living modified organisms (LMOs) trade, the Protocol encountered divergence and controversy in the negotiation process, After adoption of the Protocol, compatibility of its provisions with those set in the WTO agreements has turned into a hot issue for dispute in the international forum。

Monitoring of abdominal Staphylococcus aureus infection using magnetic resonance imaging

DEFF Research Database (Denmark)

Kromrey, M L; Göhler, A; Friedrich, N

2017-01-01

To establish a routine workflow for in vivo magnetic resonance imaging (MRI) of mice infected with bacterial biosafety level 2 pathogens and to generate a mouse model for systemic infection with Staphylococcus aureus suitable for monitoring by MRI. A self-contained acrylic glass animal bed...... complying with biosafety level 2 requirements was constructed. After intravenous infection with 10(5) colony-forming units (CFU) (n = 3), 10(6) CFU (n = 11) or 10(7) CFU (n = 6) of S. aureus strain Newman, female Balb/c mice were whole-body scanned by 7T MRI. Abdominal infections such as abscesses were...... visualized using a standard T2-weighted scan. Infection monitoring was performed for each animal by measurements at 1, 3, and 7 days after infection. Intravenous pathogen application led to a dose-dependent decrease in survival probability (p = 0.03). In the group with the highest infectious dose the 7-day...

Hospital seguro frente aos desastres: uma reflexão sobre biossegurança e arquitetura Hospitals safe from disasters: a reflection on architecture and biosafety

Directory of Open Access Journals (Sweden)

Lucia Cristina de Paiva Saba

2012-02-01

Full Text Available Um dos maiores desafios da sociedade atual é o enfrentamento das adversidades causadas pelos desastres. Os estabelecimentos de saúde, principalmente os hospitais, são considerados essenciais nessas situações. Este trabalho discute os princípios da arquitetura do hospital seguro frente aos desastres, como propõem a Organização Mundial da Saúde e a Organização Pan-Americana da Saúde. Projetar um hospital seguro exige ações multidisciplinares, com envolvimento de administradores, arquitetos, engenheiros, médicos e enfermeiros. O planejamento de cada hospital pressupõe uma análise de riscos e aspectos de segurança específicos. Também é importante agregar a biossegurança ao conceito de hospital seguro. O equilíbrio entre aspectos arquitetônicos e biossegurança permite a compreensão dos riscos associados ao trabalho, facilitando o dimensionamento de espaços para suportar as ações de resposta frente às emergências. Em suma, a programação de um hospital seguro requer uma síntese de conhecimentos que relacionam diversos saberes, entre eles os da biossegurança e da arquitetura hospitalar. Esses princípios devem embasar as indagações sobre o hospital seguro e o planejamento de projetos arquitetônicos com foco na manutenção das instalações em capacidade máxima mesmo diante de situações adversas.One of the biggest challenges in today’s society is facing adversity caused by disasters. Health facilities, especially hospitals, are considered essential in these situations. This article discusses the principles of architectural design of hospitals safe from disasters, as proposed by the World Health Organization and the Pan American Health Organization. Designing a safe hospital requires multidisciplinary efforts, involving administrators, architects, engineers, physicians, and nurses. The planning of each hospital demands the analysis of specific risks and safety concerns. The concept of biosafety should also be

Heat transfer effects in vertically emplaced high level nuclear waste container

International Nuclear Information System (INIS)

Moujaes, S.F.; Lei, Y.M.

1994-01-01

Modeling free convection heat transfer in a cylindrical annular enclosure is still an active area of research and an important problem to be addressed in the high level nuclear waste repository. For the vertically emplaced waste container, the air gap which is between the container shell and the rock borehole, have an important role of dissipating heat to surrounding rock. These waste containers are vertically emplaced in the borehole 300 meters just below ground, and in a horizontal grid of 30 x 8 meters apart. The borehole will be capped after the container emplacement. The expected initial heat generated is between 3-4.74 kW per container depending on the type of waste. The goal of this study is to use a computer simulation model to find the borehole wall, air-gap and the container outer wall temperature distributions. The borehole wall temperature history has been found in the previous study, and was estimated to reach a maximum temperature of about 218 degrees C after 18 years from the emplacement. The temperature history of the rock surface is then used for the air-gap simulation. The problem includes convection and radiation heat transfer in a vertical enclosure. This paper will present the results of the convection in the air-gap over one thousand years after the containers' emplacement. During this long simulation period it was also observed that a multi-cellular air flow pattern can be generated in the air gap

Salt removal from tanks containing high-level radioactive waste

International Nuclear Information System (INIS)

Kiser, D.L.

1981-01-01

At the Savannah River Plant (SRP), there are 23 waste storage tanks containing high-level radioactive wastes that are to be retired. These tanks contain about 23 million liters of salt and about 10 million liters of sludge, that are to be relocated to new Type III, fully stress-relieved tanks with complete secondary containment. About 19 million liters of salt cake are to be dissolved. Steam jet circulators were originally proposed for the salt dissolution program. However, use of steam jet circulators raised the temperature of the tank contents and caused operating problems. These included increased corrosion risk and required long cooldown periods prior to transfer. Alternative dissolution concepts were investigated. Examination of mechanisms affecting salt dissolution showed that the ability of fresh water to contact the cake surface was the most significant factor influencing dissolution rate. Density driven and mechanical agitation techniques were developed on a bench scale and then were demonstrated in an actual waste tank. Actual waste tank demonstrations were in good agreement with bench-scale experiments at 1/85 scale. The density driven method utilizes simple equipment, but leaves a cake heel in the tank and is hindered by the presence of sludge or Zeolite in the salt cake. Mechanical agitation overcomes the problems found with both steam jet circulators and the density driven technique and is the best method for future waste tank salt removal

Defense Laboratory Enterprise

Science.gov (United States)

2011-07-01

NSWC - Corona Division Corona , CA 53 NSWC - Crane Division Crane, IN 55 NSWC - Dahlgren Division Dahlgren, VA 57 NSWC - Naval Explosive Ordnance...Invention • HemCon Chitosan Dressing – 2004 Army Greatest Invention • Combat Application Tourniquet ( CAT ) – 2005 Army Greatest Invention • Damage...laboratory within DoD with the capability to study highly hazardous viruses requiring maximum containment at Biosafety Level 4 (BSL-4). While the

Viability testing of material derived from Mycobacterium tuberculosis prior to removal from a containment level-III laboratory as part of a Laboratory Risk Assessment Program.

Science.gov (United States)

Blackwood, Kym S; Burdz, Tamara V; Turenne, Christine Y; Sharma, Meenu K; Kabani, Amin M; Wolfe, Joyce N

2005-01-24

In the field of clinical mycobacteriology, Mycobacterium tuberculosis (MTB) can be a difficult organism to manipulate due to the restrictive environment of a containment level 3 (CL3) laboratory. Tests for rapid diagnostic work involving smears and molecular methods do not require CL3 practices after the organism has been rendered non-viable. While it has been assumed that after organism deactivation these techniques can be performed outside of a CL3, no conclusive study has consistently confirmed that the organisms are noninfectious after the theoretical 'deactivation' steps. Previous studies have shown that initial steps (such as heating/chemical fixation) may not consistently kill MTB organisms. An inclusive viability study (n = 226) was undertaken to determine at which point handling of culture extraction materials does not necessitate a CL3 environment. Four different laboratory protocols tested for viability included: standard DNA extractions for IS6110 fingerprinting, crude DNA preparations for PCR by boiling and mechanical lysis, protein extractions, and smear preparations. For each protocol, laboratory staff planted a proportion of the resulting material to Bactec 12B medium that was observed for growth for 8 weeks. Of the 208 isolates initially tested, 21 samples grew within the 8-week period. Sixteen (7.7%) of these yielded positive results for MTB that included samples of: deactivated culture resuspensions exposed to 80 degrees C for 20 minutes, smear preparations and protein extractions. Test procedures were consequently modified and tested again (n = 18), resulting in 0% viability. This study demonstrates that it cannot be assumed that conventional practices (i.e. smear preparation) or extraction techniques render the organism non-viable. All methodologies, new and existing, should be examined by individual laboratories to validate the safe removal of material derived from MTB to the outside of a CL3 laboratory. This process is vital to establish in

Viability testing of material derived from Mycobacterium tuberculosis prior to removal from a Containment Level-III Laboratory as part of a Laboratory Risk Assessment Program

Directory of Open Access Journals (Sweden)

Kabani Amin M

2005-01-01

Full Text Available Abstract Background In the field of clinical mycobacteriology, Mycobacterium tuberculosis (MTB can be a difficult organism to manipulate due to the restrictive environment of a containment level 3 (CL3 laboratory. Tests for rapid diagnostic work involving smears and molecular methods do not require CL3 practices after the organism has been rendered non-viable. While it has been assumed that after organism deactivation these techniques can be performed outside of a CL3, no conclusive study has consistently confirmed that the organisms are noninfectious after the theoretical 'deactivation' steps. Previous studies have shown that initial steps (such as heating /chemical fixation may not consistently kill MTB organisms. Methods An inclusive viability study (n = 226 was undertaken to determine at which point handling of culture extraction materials does not necessitate a CL3 environment. Four different laboratory protocols tested for viability included: standard DNA extractions for IS6110 fingerprinting, crude DNA preparations for PCR by boiling and mechanical lysis, protein extractions, and smear preparations. For each protocol, laboratory staff planted a proportion of the resulting material to Bactec 12B medium that was observed for growth for 8 weeks. Results Of the 208 isolates initially tested, 21 samples grew within the 8-week period. Sixteen (7.7% of these yielded positive results for MTB that included samples of: deactivated culture resuspensions exposed to 80°C for 20 minutes, smear preparations and protein extractions. Test procedures were consequently modified and tested again (n = 18, resulting in 0% viability. Conclusions This study demonstrates that it cannot be assumed that conventional practices (i.e. smear preparation or extraction techniques render the organism non-viable. All methodologies, new and existing, should be examined by individual laboratories to validate the safe removal of material derived from MTB to the outside of a

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Bullen, D.B.; Gdowski, G.E.; Weiss, H.

1988-06-01

Three copper-based alloys, CDA 102 (oxygen-free copper), CDA 613 (Cu-7Al), and CDA 715 (Cu-30Ni), are being considered along with three austenitic candidates as possible materials for fabrication of containers for disposal of high-level radioactive waste. The waste will include spent fuel assemblies from reactors as well as high-level reprocessing wastes in borosilicate glass and will be sent to the prospective repository at Yucca Mountain, Nevada, for disposal. The containers must maintain mechanical integrity for 50 yr after emplacement to allow for retrieval of waste during the preclosure phase of repository operation. Containment is required to be substantially complete for up to 300 to 1000 yr. During the early period, the containers will be exposed to high temperatures and high gamma radiation fields from the decay of high-level waste. The final closure joint will be critical to the integrity of the containers. This volume surveys the available data on the metallurgy of the copper-based candidate alloys and the welding techniques employed to join these materials. The focus of this volume is on the methods applicable to remote-handling procedures in a hot-cell environment with limited possibility of postweld heat treatment. The three copper-based candidates are ranked on the basis of the various closure techniques. On the basis of considerations regarding welding, the following ranking is proposed for the copper-based alloys: CDA 715 (best) > CDA 102 > CDA 613 (worst). 49 refs., 15 figs., 1 tab

Design study on containers for geological disposal of high-level radioactive waste

International Nuclear Information System (INIS)

Arup, O.

1985-01-01

A study has been made of the requirements and design features for containers to isolate vitrified high-level radioactive waste from the environment for a period of 500 to 1000 years. The requirements for handling, storing and transporting containers have been identified following a study of disposal operations, and the pressures and temperatures which may possibly be experienced in clay, granite and salt formations have been estimated. A range of possible container designs have been proposed to satisfy the requirements of each of the disposal environments. Alternative design concepts in corrosion resistant or corrosion allowance material have been suggested. Some resist pressure by using a structural shell leaving the contents unstressed whereas others transmit loads to their contents. Potentially suitable container shell materials have been selected following a review of corrosion studies and although metals have not been specified in detail, titanium alloys and low carbon steels are thought to be appropriate for corrosion resistant and corrosion allowance designs respectively. Performance requirements for container filler materials have been identified and candidate materials assessed. However, no entirely suitable materials have been found and further research is required in this area. A preliminary container stress analysis has shown the importance of thermal modelling and that if lead is used as a filler it dominates the stress response of the container. Possible methods of manufacturing disposal containers have been assessed and found to be generally feasible although filling operations and container closure could be difficult

78 FR 110 - Supplemental Record of Decision; Final Supplementary Risk Assessment for the Boston University...

Science.gov (United States)

2013-01-02

..., questions were raised specifically about the potential risks of the biosafety level 4 (BSL-4) laboratory. To... epidemiology, risk assessment, environmental justice, risk communications, biosafety, and infectious disease... functional personal protective equipment, and standard operating procedures were not taken into account in...

Greater-than-Class C low-level radioactive waste shipping package/container identification and requirements study. National Low-Level Waste Management Program

Energy Technology Data Exchange (ETDEWEB)

Tyacke, M.

1993-08-01

This report identifies a variety of shipping packages (also referred to as casks) and waste containers currently available or being developed that could be used for greater-than-Class C (GTCC) low-level waste (LLW). Since GTCC LLW varies greatly in size, shape, and activity levels, the casks and waste containers that could be used range in size from small, to accommodate a single sealed radiation source, to very large-capacity casks/canisters used to transport or dry-store highly radioactive spent fuel. In some cases, the waste containers may serve directly as shipping packages, while in other cases, the containers would need to be placed in a transport cask. For the purpose of this report, it is assumed that the generator is responsible for transporting the waste to a Department of Energy (DOE) storage, treatment, or disposal facility. Unless DOE establishes specific acceptance criteria, the receiving facility would need the capability to accept any of the casks and waste containers identified in this report. In identifying potential casks and waste containers, no consideration was given to their adequacy relative to handling, storage, treatment, and disposal. Those considerations must be addressed separately as the capabilities of the receiving facility and the handling requirements and operations are better understood.

Plasma levels of selenium-containing proteins in Inuit adults from Nunavik.

Science.gov (United States)

Achouba, Adel; Dumas, Pierre; Ouellet, Nathalie; Lemire, Mélanie; Ayotte, Pierre

2016-11-01

Selenium (Se) is highly abundant in marine foods traditionally consumed by Inuit of Nunavik (Northern Quebec, Canada) and accordingly, their Se intake is among the highest in the world. However, little is known regarding the biological implications of this high Se status in this Arctic indigenous population. We used a method combining affinity chromatography and inductively coupled plasma-mass spectrometry with quantification by post-column isotope dilution to determine total Se levels and concentrations of Se-containing proteins in archived plasma samples of Inuit adults who participated to the 2004 Nunavik Inuit Health Survey (N = 852). Amounts of mercury (Hg) associated with Se-containing proteins were also quantified. Results show that glutathione peroxidase 3 (GPx3), selenoprotein P (SelP) and selenoalbumin (SeAlb) represented respectively 25%, 52% and 23% of total plasma Se concentrations. In addition, small amounts of Hg co-eluted with each Se-containing protein and up to 50% of plasma Hg was associated to SelP. Total plasma Se concentrations (median = 139 μg L− 1; interquartile range (IQR) = 22.7 μg L− 1) were markedly lower and less variable than whole blood Se concentration (median = 261 μg L− 1, IQR = 166 μg L− 1). A non linear relation was observed between whole blood Se and plasma Se levels, with plasma Se concentrations leveling off at approximately 200 μg L− 1, whereas 16% and 3% of individuals exhibited whole blood concentrations higher than 500 μg L− 1 and 1000 μg L− 1, respectively. In contrast, a linear relationship was previously reported in communities consuming Brazil nuts which are rich Se, mainly present as selenomethionine. This suggests that a different selenocompound, possibly selenoneine, is present in the Arctic marine food chain and accumulates in the blood cellular fraction of Inuit.

Model for analyzing demand for low-level waste transport containers - regionalized and non-regionalized scenarios

International Nuclear Information System (INIS)

Nelson, A.J.; Rose, K.

1982-01-01

Certain types of low-level radioactive waste (LLW) must be shipped in expensive special containers. It is therefore desirable to keep container utilization high. There must be a stock of containers sufficient to ship waste in a timely fashion, but one does not want to have containers sitting idle a significant fraction of the time. A computerized discrete event network model has been developed and is described in this report. The model allows an analyst to determine the effects of varying the increase in LLW, establishment of regional disposal, etc. on requirements for shipping containers

Biosafety Assessment of Microbial Strains Used in Biotechnology According to Their Taxonomy

Directory of Open Access Journals (Sweden)

Natalia I. Sheina

2017-03-01

Full Text Available A great variety of biotechnological products are now widely used in different ways in agriculture, medicine, food manufacturing and other areas of our life. Industrialized societies now more than ever depend on the use of genetically engineered products, with many of them synthesized using recombinant strains of microorganisms. There is an opinion that microbial strains used in biotechnology are potentially harmful for human health and the environment. Similar to many other countries, we have enacted environmental legislation in an effort to balance the risks and benefits of using biotechnological strains. Although environmental monitoring rules focus mainly on safety assessments of chemicals, the biosafety assessment of microbial strains used in biotechnology is a very important issue as well. This article summarizes 15 years of research on the biotechnological strains of microbes widely used as producers of various biological substances for industrial purposes, and their environmental and biotechnological applications. In our survey, we tried to evaluate possible adverse effects (general toxicity and damage to the immune system, potential sensitizing effects, and damage to normal microbiota caused by these microbes. It was shown that microscopical fungi of genera Aspergillus, Penicillium and Candida, and some gram-negative bacteria can affect the immune system and disrupt the normal balance of microbial flora of the intestinal tract in rats. The actinomycetes are less dangerous in that they cause fewer side effects. The investigation data obtained can be used to develop safety and hygienic standards for industrial microbes that will help decrease or minimize the occupational risk of infection or damage to the immune system when working with biotechnological strains of microbes.

Cost savings associated with landfilling wastes containing very low levels of uranium

International Nuclear Information System (INIS)

Boggs, C.J.; Shaddoan, W.T.

1996-01-01

The Paducah Gaseous Diffusion Plant (PGDP) has operated captive landfills (both residential and construction/demolition debris) in accordance with the Commonwealth of Kentucky regulations since the early 1980s. Typical waste streams allowed in these landfills include nonhazardous industrial and municipal solid waste (such as paper, plastic, cardboard, cafeteria waste, clothing, wood, asbestos, fly ash, metals, and construction debris). In July 1992, the U.S. Environmental Protection Agency issued new requirements for the disposal of sanitary wastes in a open-quotes contained landfill.close quotes These requirements were promulgated in the 401 Kentucky Administrative Record Chapters 47 and 48 that became effective 30 June 1995. The requirements for a new contained landfill include a synthetic liner made of high-density polyethylene in addition to the traditional 1-meter (3-foot) clay liner and a leachate collection system. A new landfill at Paducah would accept waste streams similar to those that have been accepted in the past. The permit for the previously existing landfills did not include radioactivity limits; instead, these levels were administratively controlled. Typically, if radioactivity was detected above background levels, the waste was classified as low-level waste (LLW), which would be sent off-site for disposal

Justification for Selecting Level A vs. Level B Personal Protective Equipment to Remediate a Room Containing Concentrated Acids, Bases and Radiological Constituents

International Nuclear Information System (INIS)

Hylko, J. M.; Thompson, A. L.; Walter, J. F.; Deecke, T. A.

2002-01-01

Selecting the appropriate personal protective equipment (PPE) is based on providing an adequate level of employee protection relative to the task-specific conditions and hazards. PPE is categorized into four ensembles, based on the degree of protection afforded; e.g., Levels A (most restrictive), B, C, and D (least restrictive). What is often overlooked in preparing an ensemble is that the PPE itself can create significant worker hazards; i.e., the greater the level of PPE, the greater the associated risks. Furthermore, there is confusion as to whether a more ''conservative approach'' should always be taken since Level B provides the same level of respiratory protection as Level A but less skin protection. This paper summarizes the Occupational Safety and Health Administration regulations addressing Level A versus Level B, and provides justification for selecting Level B over Level A without under-protecting the employee during a particular remediation scenario. The scenario consisted of an entry team performing (1) an initial entry into a room containing concentrated acids (e.g., hydrofluoric acid), bases, and radiological constituents; (2) sampling and characterizing container contents; and (3) retrieving characterized containers. The invasive nature of the hydrofluoric acid sampling and characterization scenario created a high potential for splash, immersion, and exposure to hazardous vapors, requiring additional skin protection. The hazards associated with this scenario and the chemical nature of hydrofluoric acid provided qualitative evidence to justify Level A. Once the hydrofluoric acid was removed from the room, PPE performance was evaluated against the remaining chemical inventory. If chemical breakthrough from direct contact was not expected to occur and instrument readings confirmed the absence of any hazardous vapors, additional skin protection afforded by wearing a vapor-tight, totally-encapsulated suit was not required. Therefore, PPE performance and

High level waste containing granules coated and embedded in metal as an alternative to HLW glasses

International Nuclear Information System (INIS)

Neumann, W.

1980-01-01

Simulated high level waste containing granules were overcoated with pyrocarbon or nickel respectively. The coatings were performed by the use of chemical vapour deposition in a fluidized bed. The coated granules were embedded in an aluminium-silicon-alloy to improve the dissipation of radiation induced heat. The metal-granules-composites obtained were of improved product stability related to the high level waste containing glasses. (orig.) [de

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Gdowski, G.E.; Bullen, D.B.

1988-08-01

Three copper-based alloys and three iron- to nickel-based austenitic alloys are being considered as possible materials for fabrication of containers for disposal of high-level radioactive waste. This waste will include spent fuel assemblies from reactors as well as high-level waste in borosilicate glass and will be sent to the prospective site at Yucca Mountain, Nevada, for disposal. The containers must maintain substantially complete containment for at least 300 yr and perhaps as long as 1000 yr. During the first 50 yr after emplacement, they must be retrievable from the disposal site. Shortly after the containers are emplaced in the repository, they will be exposed to high temperatures and high gamma radiation fields from the decay of the high-level waste. This volume surveys the available data on oxidation and corrosion of the iron- to nickel-based austenitic materials (Types 304L and 316L stainless steels and Alloy 825) and the copper-based alloy materials [CDA 102 (oxygen-free copper), CDA 613 (Cu-7Al), and CDA 715 (Cu-30Ni)], which are the present candidates for fabrication of the containers. Studies that provided a large amount of data are highlighted, and those areas in which little data exists are identified. Examples of successful applications of these materials are given. On the basis of resistance to oxidation and general corrosion, the austenitic materials are ranked as follows: Alloy 825 (best), Type 316L stainless steel, and then Type 304L stainless steel (worst). For the copper-based materials, the ranking is as follows: CDA 715 and CDA 613 (both best), and CDA 102 (worst). 110 refs., 30 figs., 13 tabs

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

Energy Technology Data Exchange (ETDEWEB)

Gdowski, G.E.; Bullen, D.B. (Science and Engineering Associates, Inc., Pleasanton, CA (USA))

1988-08-01

Three copper-based alloys and three iron- to nickel-based austenitic alloys are being considered as possible materials for fabrication of containers for disposal of high-level radioactive waste. This waste will include spent fuel assemblies from reactors as well as high-level waste in borosilicate glass and will be sent to the prospective site at Yucca Mountain, Nevada, for disposal. The containers must maintain substantially complete containment for at least 300 yr and perhaps as long as 1000 yr. During the first 50 yr after emplacement, they must be retrievable from the disposal site. Shortly after the containers are emplaced in the repository, they will be exposed to high temperatures and high gamma radiation fields from the decay of the high-level waste. This volume surveys the available data on oxidation and corrosion of the iron- to nickel-based austenitic materials (Types 304L and 316L stainless steels and Alloy 825) and the copper-based alloy materials (CDA 102 (oxygen-free copper), CDA 613 (Cu-7Al), and CDA 715 (Cu-30Ni)), which are the present candidates for fabrication of the containers. Studies that provided a large amount of data are highlighted, and those areas in which little data exists are identified. Examples of successful applications of these materials are given. On the basis of resistance to oxidation and general corrosion, the austenitic materials are ranked as follows: Alloy 825 (best), Type 316L stainless steel, and then Type 304L stainless steel (worst). For the copper-based materials, the ranking is as follows: CDA 715 and CDA 613 (both best), and CDA 102 (worst). 110 refs., 30 figs., 13 tabs.

Educação em biossegurança e bioética: articulação necessária em biotecnologia Education on biosafety and bioethics: necessary articulation in biotechnology

Directory of Open Access Journals (Sweden)

Marcos De Bonis

2009-12-01

Full Text Available A educação científica tem sido debatida em alguns segmentos da sociedade e organizações internacionais têm estimulado as nações a investirem nessa área tão estratégica. Nesse contexto, a educação em biossegurança e bioética explora um conteúdo rico em prevenção, normas e princípios éticos, que servem para nortear os caminhos trilhados pela biotecnologia. A valorização da biossegurança e da bioética como parte de uma política educacional científica, efetiva e consistente, pode estimular a formação de indivíduos com uma consciência científica e cidadã, em condições de participar das questões de natureza ética e tecnológica produzidas pela biotecnologia.Science education has been discussed in some segments of the society and, international organizations have encouraged nations to invest in this strategic area. In this context, education in bioethics and biosafety explores a rich content on prevention, standards and ethical principles which serve to guide the paths track by biotechnology. The recovery of bioethics and biosafety, as part of an educational policy scientific, effective and consistent, can stimulate the formation of individuals with a scientific and citizen awareness, in a position to participate on ethical and technological issues produced by biotechnology.

Experiments on container materials for Swiss high-level waste disposal projects. Part 2

International Nuclear Information System (INIS)

Simpson, J.P.

1984-12-01

The present concept for final disposal of high-level waste in Switzerland consists of a repository at a depth of 1000 to 1500 m in the crystalline bedrock of northern Switzerland. The waste will be placed in a container which is required to function as a high integrity barrier for at least 1000 years. This report is the second of a set of two dealing with the evaluation of potential materials for such containers. Four materials were identified for further evaluation in the first of these reports; they were cast steel, nodular cast iron, copper and Ti-Code 12. It was concluded that some testing was needed, in particular with respect to corrosion, in order to confirm these materials as candidate container materials. The experimental programme included: 1) corrosion tests on copper under gamma radiation; 2) immersion corrosion tests on the four candidate materials including welded specimens; 3) corrosion testing of the four materials in saturated bentonite; 4) constant strain rate testing of Ti-Code 12 and copper at 80 degrees C; 5) the behaviour of copper, Ti-Code 12 and Zircaloy-2 when immersed in liquid lead; 6) corrosion potential and galvanic current measurements on several material pairs. The standard test medium was natural mineral water from the Bad Saeckingen source. This water has a total dissolved solids content of approx. 3200 mg/l, about 1600 mg/l as chloride. The oxygen level was defined as 0.1 μg/g. In certain cases this medium was modified in order to test under more severe conditions. The results of the corrosion tests confirm in general the evaluation in the first part of the report. All of the materials are suitable for high-level waste containers: cast steel, nodular cast iron and copper as single layer containers, and Ti-Code 12 as an outer corrosion resistant layer. Copper could also be used under an outer steel layer, where it could arrest local penetration

Effect of Refiner Addition Level on Zirconium-Containing Aluminium Alloys

International Nuclear Information System (INIS)

Jaradeh, M M R; Carlberg, T

2012-01-01

It is well known that in aluminium alloys containing Zr, grain refiner additions do not function as desired, producing an effect often referred to as nuclei poisoning. This paper investigates the structure of direct chill-cast ingots of commercial AA3003 aluminium alloys, with and without Zr, at various addition levels of Al5Ti1B master alloy. In Bridgman experiments simulating ingot solidification, Zr-containing alloys were studied after the addition of various amounts of Ti. It could be demonstrated, in both ingot casting and simulation experiments, that Zr poisoning can be compensated for by adding more Ti and/or Al5Ti1B. The results confirm better refinement behaviour with the addition of Ti + B than of only Ti. The various combinations of Zr and Ti also influenced the formation of AlFeMn phases, and the precipitation of large Al 6 (Mn,Fe) particles was revealed. AlZrTiSi intermetallic compounds were also detected.

Effect of Refiner Addition Level on Zirconium-Containing Aluminium Alloys

Science.gov (United States)

Jaradeh, M. M. R.; Carlberg, T.

2012-01-01

It is well known that in aluminium alloys containing Zr, grain refiner additions do not function as desired, producing an effect often referred to as nuclei poisoning. This paper investigates the structure of direct chill-cast ingots of commercial AA3003 aluminium alloys, with and without Zr, at various addition levels of Al5Ti1B master alloy. In Bridgman experiments simulating ingot solidification, Zr-containing alloys were studied after the addition of various amounts of Ti. It could be demonstrated, in both ingot casting and simulation experiments, that Zr poisoning can be compensated for by adding more Ti and/or Al5Ti1B. The results confirm better refinement behaviour with the addition of Ti + B than of only Ti. The various combinations of Zr and Ti also influenced the formation of AlFeMn phases, and the precipitation of large Al6(Mn,Fe) particles was revealed. AlZrTiSi intermetallic compounds were also detected.

Cost estimate of high-level radioactive waste containers for the Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Russell, E.W.; Clarke, W. [Lawrence Livermore National Lab., CA (United States); Domian, H.A. [Babcock and Wilcox Co., Lynchburg, VA (United States); Madson, A.A. [Kaiser Engineers California Corp., Oakland, CA (United States)

1991-08-01

This report summarizes the bottoms-up cost estimates for fabrication of high-level radioactive waste disposal containers based on the Site Characterization Plan Conceptual Design (SCP-CD). These estimates were acquired by Babcock and Wilcox (B&S) under sub-contract to Lawrence Livermore National Laboratory (LLNL) for the Yucca Mountain Site Characterization Project (YMP). The estimates were obtained for two leading container candidate materials (Alloy 825 and CDA 715), and from other three vendors who were selected from a list of twenty solicited. Three types of container designs were analyzed that represent containers for spent fuel, and for vitrified high-level waste (HLW). The container internal structures were assumed to be AISI-304 stainless steel in all cases, with an annual production rate of 750 containers. Subjective techniques were used for estimating QA/QC costs based on vendor experience and the specifications derived for the LLNL-YMP Quality Assurance program. In addition, an independent QA/QC analysis is reported which was prepared by Kasier Engineering. Based on the cost estimates developed, LLNL recommends that values of $825K and $62K be used for the 1991 TSLCC for the spent fuel and HLW containers, respectively. These numbers represent the most conservative among the three vendors, and are for the high-nickel anstenitic steel (Alloy 825). 6 refs., 7 figs.

Cost estimate of high-level radioactive waste containers for the Yucca Mountain Site Characterization Project

International Nuclear Information System (INIS)

Russell, E.W.; Clarke, W.; Domian, H.A.; Madson, A.A.

1991-08-01

This report summarizes the bottoms-up cost estimates for fabrication of high-level radioactive waste disposal containers based on the Site Characterization Plan Conceptual Design (SCP-CD). These estimates were acquired by Babcock and Wilcox (B ampersand S) under sub-contract to Lawrence Livermore National Laboratory (LLNL) for the Yucca Mountain Site Characterization Project (YMP). The estimates were obtained for two leading container candidate materials (Alloy 825 and CDA 715), and from other three vendors who were selected from a list of twenty solicited. Three types of container designs were analyzed that represent containers for spent fuel, and for vitrified high-level waste (HLW). The container internal structures were assumed to be AISI-304 stainless steel in all cases, with an annual production rate of 750 containers. Subjective techniques were used for estimating QA/QC costs based on vendor experience and the specifications derived for the LLNL-YMP Quality Assurance program. In addition, an independent QA/QC analysis is reported which was prepared by Kasier Engineering. Based on the cost estimates developed, LLNL recommends that values of $825K and $62K be used for the 1991 TSLCC for the spent fuel and HLW containers, respectively. These numbers represent the most conservative among the three vendors, and are for the high-nickel anstenitic steel (Alloy 825). 6 refs., 7 figs

Greater-than-Class C low-level radioactive waste shipping package/container identification and requirements study

International Nuclear Information System (INIS)

Tyacke, M.

1993-08-01

This report identifies a variety of shipping packages (also referred to as casks) and waste containers currently available or being developed that could be used for greater-than-Class C (GTCC) low-level waste (LLW). Since GTCC LLW varies greatly in size, shape, and activity levels, the casks and waste containers that could be used range in size from small, to accommodate a single sealed radiation source, to very large-capacity casks/canisters used to transport or dry-store highly radioactive spent fuel. In some cases, the waste containers may serve directly as shipping packages, while in other cases, the containers would need to be placed in a transport cask. For the purpose of this report, it is assumed that the generator is responsible for transporting the waste to a Department of Energy (DOE) storage, treatment, or disposal facility. Unless DOE establishes specific acceptance criteria, the receiving facility would need the capability to accept any of the casks and waste containers identified in this report. In identifying potential casks and waste containers, no consideration was given to their adequacy relative to handling, storage, treatment, and disposal. Those considerations must be addressed separately as the capabilities of the receiving facility and the handling requirements and operations are better understood

The biosafety of X-ray in bed; A biosseguranca dos raios-X no leito

Energy Technology Data Exchange (ETDEWEB)

Costa, A.S.; Vinco, Y.C.; Machado, C.P., E-mail: yasmin_claise@hotmail.com [Unigrancapital, Cidade Grande, MS (Brazil)

2015-07-01

This work aims to raise awareness on biosafety that the professional radiology needs to develop, for their own protection as well as the patient in bed during the examination of the X-ray. Assess why the use of many artifacts and discuss their safe use, the conditions necessary for operating activities that employ radioactive and radiological techniques are adopted for the benefit of society. Taking also into account the protection of workers, the public, and the patient environment. This study aims to evaluate the knowledge of technical professionals working in the field-performing x -rays in bed, currently academic course in radiology technologist. The results obtained show that 67 % of technicians, technologists’ future, use the personal protective equipment, and 25 % sometimes and never use 8 %, 92 %. Answered that in the period that is being performed on X -ray examination bed, but there are others bedridden in the same environment, with 88 % of patients in bed in bed not receive personal protective equipment nor collective protection equipment. Thus, we conclude that most technicians have cognition existing risks, so the individual protection measures are being carried out, but not by all. What still leaves to be desired is the protection of the patient in bed. These professionals need to be encouraged to study, so that we have trained professionals and holders of knowledge, enabling the improvement in labor and protection of professional and patient. (author)

Laboratory diagnosis of Ebola virus disease and corresponding biosafety considerations in the China Ebola Treatment Center.

Science.gov (United States)

Huang, Qing; Fu, Wei-Ling; You, Jian-Ping; Mao, Qing

2016-10-01

Ebola virus disease (EVD), caused by Ebola virus (EBOV), is a potent acute infectious disease with a high case-fatality rate. Etiological and serological EBOV detection methods, including techniques that involve the detection of the viral genome, virus-specific antigens and anti-virus antibodies, are standard laboratory diagnostic tests that facilitate confirmation or exclusion of EBOV infection. In addition, routine blood tests, liver and kidney function tests, electrolytes and coagulation tests and other diagnostic examinations are important for the clinical diagnosis and treatment of EVD. Because of the viral load in body fluids and secretions from EVD patients, all body fluids are highly contagious. As a result, biosafety control measures during the collection, transport and testing of clinical specimens obtained from individuals scheduled to undergo EBOV infection testing (including suspected, probable and confirmed cases) are crucial. This report has been generated following extensive work experience in the China Ebola Treatment Center (ETC) in Liberia and incorporates important information pertaining to relevant diagnostic standards, clinical significance, operational procedures, safety controls and other issues related to laboratory testing of EVD. Relevant opinions and suggestions are presented in this report to provide contextual awareness associated with the development of standards and/or guidelines related to EVD laboratory testing.

A preliminary assessment of the assignment of Intermediate Level Waste streams to designs of transport containers

International Nuclear Information System (INIS)

Mairs, J.H.

1984-08-01

This paper considers the assignment of ILW to designs of transport container. Estimates are made of the radiation levels penetrating the transport containers and assesses the duration of any storage required prior to transportation. (author)

The structural integrity of high level waste containers for deep disposal

International Nuclear Information System (INIS)

Keer, T.J.; Martindale, N.J.; Haijtink, B.

1990-01-01

Most countries with a nuclear power program are developing plans to dispose of high level waste in deep geological repositories. These facilities are typically in the range 500-1000m below ground. Although long term safety analyses mainly rely on the isolation function of the geological barrier, for the medium term (between 500 and 1000 years) a barrier such as a container (overpack) may play an important role. This paper addresses the mechanical/structural behavior of these structures under extreme geological pressures. The work described in the paper was conducted within the COMPAS project (Container Mechanical Performance Assessment) funded by the Commission of the European Communities and the United Kingdom Department of the Environment. The work was aimed at predicting the modes of failure and failure pressures which characterize the heavy, thick walled mild steel containers which might be considered for the disposal of vitrified waste. The work involved a considerable amount of analytical work, using 3-D non-linear finite element techniques, coupled with a large parallel program of experimental work. The experimental work consisted of a number of scale model tests in which the response of the containers was examined under external pressures as high as 120MPa. Extensive strain-gauge instrumentation was used to record the behavior of the models as they were driven to collapse. A number of comparative computer calculations were carried out by organizations from various European countries. Correlations were established between experimental and analytical data and guidelines regarding the choice of suitable software were established. The work concluded with a full 3-D simulation of the behavior of a container under long-term disposal conditions. In this analysis, non-linearities due to geological effects and material/geometry effects in the container were properly accounted for. 6 refs., 9 figs., 4 tabs

Ensino de Biossegurança na Graduação em Enfermagem: uma revisão da literatura Enseñanza de Bioseguridad en la Graduación de Enfermería: una revisión de la literatura The teaching of Biosafety in Nursing Undergraduation: a literature review

Directory of Open Access Journals (Sweden)

Andréia de Carvalho Andrade

2007-10-01

Full Text Available Trata-se de um estudo que realizou um levantamento da produção científica em enfermagem referente ao ensino de biossegurança com o objetivo de investigar o contexto em que se deram e conhecer o conteúdo das publicações acerca do ensino de biossegurança na graduação em enfermagem. Foram analisados artigos de periódicos encontrados na consulta às bases de dados LILACS, SciELO, MEDLINE, BDENF, DEDALUS e PERIENF, identificando 26 artigos. Os resultados encontrados proporcionaram a formação e discussão das categorias: "Bases ideológicas e teóricas", "Abordagem histórica de biossegurança", "Riscos ocupacionais e AIDS" e "Educação em biossegurança na formação". Conclui-se que o número de artigos é pequeno, principalmente artigos enfocando educação em biossegurança, mas houve uma evolução deste conteúdo nos últimos anos.Se trata de un estudio que realizá un levantamiento de la produccion científica en enfermería referente o la enseñanza de bioseguridad con el objetivo de investigar el contexto en que se dieron y conocer el contenido de las publicacions acerca de la ensenonze de bioseguridad em la graduación de enfermería. Fueron analizados artículos de periódicos encontrados em la consulta de bases de datos LILACS, SciELO, MEDLINE, BDENF, DEDALUS y PERIENF, identificando 26 artículos. Los resultados encontrados proporcionaron la formacíon y discusión de las categorías: "Bases ideológicas y teóricas", "Abordaje histórica de bioseguridad", "Riesgos ocupacionales y SIDA" y "Educación en bioseguridad en la formación". Se concluye que el número de artículos es pequeno, principalmente artículos que enfocan educación en bioseguridad, pero hubo una evolución de este contenido en los últimos años.It's a study that made a scientific production survey in nursing regarding to biosafety teaching aiming to investigate its context and discover the content of publishing on biosafety teaching in the nursing

Do optimally ripe blackberries contain the highest levels of metabolites?

Science.gov (United States)

Mikulic-Petkovsek, Maja; Koron, Darinka; Zorenc, Zala; Veberic, Robert

2017-01-15

Five blackberry cultivars were selected for the study ('Chester Thornless', 'Cacanska Bestrna', 'Loch Ness', 'Smoothstem' and 'Thornfree') and harvested at three different maturity stages (under-, optimal- and over-ripe). Optimally ripe and over-ripe blackberries contained significantly higher levels of total sugars compared to under-ripe fruit. 'Loch Ness' cultivar was characterized by 2.2-2.6-fold higher levels of total sugars than other cultivars and consequently, the highest sugar/acids ratio. 'Chester Thornless' stands out as the cultivar with the highest level of vitamin C in under-ripe (125.87mgkg(-1)) and optimally mature fruit (127.66mgkg(-1)). Maturity stage significantly affected the accumulation of phenolic compounds. The content of total anthocyanins increased for 43% at optimal maturity stage and cinnamic acid derivatives for 57% compared to under-ripe fruit. Over-ripe blackberries were distinguished by the highest content of total phenolics (1251-2115mg GAE kg(-1) FW) and greatest FRAP values (25.9-43.2mM TE kg(-1) FW). Copyright © 2016 Elsevier Ltd. All rights reserved.

Use of PSA Level 2 analysis for improving containment performance. Report of a technical committee meeting

International Nuclear Information System (INIS)

1998-03-01

In order to discuss and exchange experience on different aspects of methods associated with Level 2 PSA and its applications for improving containment performance, the IAEA held a Technical Committee meeting in Vienna in December 1996. The meeting, which was attended by 26 participants from 20 Member States, provided a broad forum for discussion. The meeting addressed the issues related to the actual performance of Level 2 PSA studies as well as the insights gained from applications to improve containment performance. Particular attention was given to studies and applications for WWER type reactors, for which Level 2 work is still in its early stages, and for channel type reactors where modelling of accident progression is complex and significantly different from vessel type light water reactors. This TECDOC contains the papers presented at the meeting and the results of extensive discussions which were held in specific working groups

Corrosion susceptibility of steel drums containing cemented intermediate level nuclear wastes

Science.gov (United States)

Duffó, Gustavo S.; Farina, Silvia B.; Schulz, Fátima M.; Marotta, Francesca

2010-10-01

Cementation processes are used as immobilization techniques for low or intermediate level radioactive waste for economical and safety reasons and for being a simple operation. In particular, ion-exchange resins commonly used for purification of radioactive liquid waste from nuclear reactors are immobilized before being stored to improve the leach resistance of the waste matrix and to maintain mechanical stability. Combustible solid radioactive waste can be incinerated and the resulting ashes can also be immobilized before storage. The immobilized resins and ashes are then contained in steel drums that may undergo corrosion depending on the presence of certain contaminants. The work described in this paper was aimed at evaluating the corrosion susceptibility of steel drums in contact with cemented ion-exchange resins and incineration ashes containing different concentrations of aggressive species (mostly chloride and sulphate ions). A special type of specimen was designed to simulate the cemented waste in the drum. The evolution of the corrosion potential and the corrosion current density of the steel, as well as the electrical resistivity of the matrix were monitored over a time period of 1 year. The results show the deleterious effect of chloride on the expected lifespan of the waste containers.

Corrosion susceptibility of steel drums containing cemented intermediate level nuclear wastes

International Nuclear Information System (INIS)

Duffo, Gustavo S.; Farina, Silvia B.; Schulz, Fatima M.; Marotta, Francesca

2010-01-01

Cementation processes are used as immobilization techniques for low or intermediate level radioactive waste for economical and safety reasons and for being a simple operation. In particular, ion-exchange resins commonly used for purification of radioactive liquid waste from nuclear reactors are immobilized before being stored to improve the leach resistance of the waste matrix and to maintain mechanical stability. Combustible solid radioactive waste can be incinerated and the resulting ashes can also be immobilized before storage. The immobilized resins and ashes are then contained in steel drums that may undergo corrosion depending on the presence of certain contaminants. The work described in this paper was aimed at evaluating the corrosion susceptibility of steel drums in contact with cemented ion-exchange resins and incineration ashes containing different concentrations of aggressive species (mostly chloride and sulphate ions). A special type of specimen was designed to simulate the cemented waste in the drum. The evolution of the corrosion potential and the corrosion current density of the steel, as well as the electrical resistivity of the matrix were monitored over a time period of 1 year. The results show the deleterious effect of chloride on the expected lifespan of the waste containers.

A importância da abordagem contextual no ensino de biossegurança The importance of the contextual approach in the teaching of biosafety

Directory of Open Access Journals (Sweden)

Maria Eveline de Castro Pereira

2012-06-01

Full Text Available A biossegurança é um campo do conhecimento que insere questões voltadas para organismos geneticamente modificados e relacionadas à proteção social e ocupacional do trabalhador. O seu processo educativo visa à formação de um agente participativo-transformador e, portanto, deve ultrapassar a simples ideia da normalização. Dessa forma, é importante contextualizar a biossegurança dentro de uma estratégia de ensino construtivista com a identificação dos seus conceitos estruturantes - risco, perigo e acidente - que permitam ao indivíduo compreender como o risco é percebido na sociedade e enfocado na academia para, em seguida, agregar múltiplas competências e enfrentá-lo. Conhecer como as relações de trabalho-saúde, suas implicações e impactos vem sendo construídas ao longo do tempo, pode formar um cidadão mais crítico e preparado para participar das decisões de ordem político-social que podem influenciar o seu futuro.Biosafety is a field of knowledge that raises questions geared to genetically modified organisms that are linked to social and job-related employee protection. The educational process involves seeking to create a participative and transforming agent and must therefore transcend the simple concept of teaching. Thus, it is important to contextualize biosafety within a constructive teaching strategy by identification of its core concepts - risk, hazard and accident - which allows each individual to understand how risk is perceived within society and dealt with in academia in order to add multiple skills to tackle the situation. Understanding how the relationship between work and health and its consequences and effects are constructed over the course of time, makes it possible to train more critical and well prepared citizens to participate in decisions of a political and social nature that can influence their future.

The Welding Effect on Mechanical Strength of Low Level Radioactive Waste Drum Container

International Nuclear Information System (INIS)

Aisyah; Herlan Martono

2007-01-01

The treatment of compactable low level solid waste was started by compaction of 100 liter drum containing the waste using 600 kN hydraulic press in 200 liters drum. The 200 liter drum of waste container containing of compacted waste then immobilized with cement and stored in interm storage. The 200 liter drum of waste container made of carbon steel material to comply with a good mechanical strength request in order to be able to retain the waste content for long period. Welding is a one step in a waste drum container fabrication process that has an opportunity in decreasing these mechanical strength. The research is carried out by welding the waste drum container material sample by electric arc welding. Mechanical strength test carried out by measuring the tensile strength by using the tensile strength machine, hardness test by using Vickers hardness test and microstructure observation by using the optic microscope. The result shows that the welding cause the microstructure changes, its meaning of forming ferro oxide phase on welding area that leads to the brittle material, so that the mechanical strength has a decreasing slightly. Nevertheless the decreasing of mechanical strength is still in the range of safety limit. (author)

Experiments on container materials for Swiss high-level waste disposal projects. Part IV

International Nuclear Information System (INIS)

Simpson, J.P.

1989-12-01

One concept for final disposal of high-level waste in switzerland consists of a repository at a depth of 1000 to 1500 m in the crystalline bedrock of Northern Switzerland. The waste will be placed in a container which will be required to function as a high integrity barrier for at least 100 years. This report is the fourth and last in the current series dealing with the evaluation of potential materials for such containers. Four materials were identified for further evaluation in the first of these reports: cast steel, nodular cast iron, copper and Ti-Code 12. This report deals with the problem of demonstrating that cast steel containers will not fail by stress corrosion cracking and with the problem of hydrogen produced by the reduction of water. The experimental results on pre-cracked specimens revealed no susceptibility of cast steel to stress corrosion cracking under model repository conditions. No crack growth was detected on compact DCB specimens exposed in aerobic and anaerobic groundwaters at 80 and 140 o C for 16-24 months. Cast steel remains a candidate material for high-level waste containers. As expected from thermodynamic considerations no hydrogen could be detected from copper immersed in model groundwaters at 50 o C. Hydrogen is evolved from corroding steel under anaerobic conditions. Hydrogen evolution due to corrosion of iron or steel in waste repositories has to be considered in any safety analysis; the amounts produced can be significant. Evidence todate suggests that both cast steel and copper are suitable container materials. Because the corrosion behaviour of both materials is sensitive to service conditions, in particular length of the aerobic phase, groundwater chemistry and temperature, further testing should be undertaken when a specific site has been identified. (author) 9 tabs., 11 figs., 25 refs

Harmonized biosafety regulations are key to trust building in regional agbiotech partnerships: the case of the Bt cotton project in East Africa

Directory of Open Access Journals (Sweden)

Ezezika Obidimma C

2012-11-01

Full Text Available Abstract Background The Bacillus thuringiensis (Bt cotton public-private partnership (PPP project in East Africa was designed to gather baseline data on the effect of Bt cotton on biodiversity and the possibility of gene flow to wild cotton varieties. The results of the project are intended to be useful for Kenya, Uganda, and Tanzania when applying for biosafety approvals. Using the backdrop of the different biosafety regulations in the three countries, we investigate the role of trust in the Bt cotton partnership in East Africa. Methods Data were collected by reviewing relevant project documents and peer-reviewed articles on Bt cotton in Tanzania, Kenya and Uganda; conducting face-to-face interviews with key informants of the project; and conducting direct observations of the project. Data were analyzed based on recurring and emergent themes to create a comprehensive narrative on how trust is understood and built among the partners and with the community. Results We identified three factors that posed challenges to building trust in the Bt cotton project in East Africa: different regulatory regimes among the three countries; structural and management differences among the three partner institutions; and poor public awareness of GM crops and negative perceptions of the private sector. The structural and management differences were said to be addressed through joint planning, harmonization of research protocols, and management practices, while poor public awareness of GM crops and negative perceptions of the private sector were said to be addressed through open communication, sharing of resources, direct stakeholder engagement and awareness creation. The regulatory differences remained outside the scope of the project. Conclusions To improve the effectiveness of agbiotech PPPs, there is first a need for a regulatory regime that is acceptable to both the public and private sector partners. Second, early and continuous joint planning; sharing of

Studies of corrosion in metallic container for storage of high level radioactive wastes

International Nuclear Information System (INIS)

Azkarate, I.; Madina, V.; Insausti, M.

1999-01-01

The metallic container is one of the most important barriers that, along with engineered and natural barriers, will isolate high level nuclear waste in saline and granite geological formations from the geosphere. However, general and localized corrosion modes such as stress corrosion cracking (SCC), pitting, crevice corrosion and hydrogen damage can be active under disposal conditions, so the corrosion behaviour of the metal container material must be carefully studied. Several metals and their alloys have been proposed for the fabrication of nuclear waste containers including carbon steels, stainless steels, titanium and titanium alloys and copper and copper-base alloys. Carbon steels and copper alloys are considered for the two rock formations, titanium is considered for salt environments and the stainless steel only in the case of a granite formation. (Author)

Electrochemical probing of high-level radioactive waste tanks containing washed sludge and precipitates

International Nuclear Information System (INIS)

Bickford, D.F.; Congdon, J.W.; Oblath, S.B.

1986-12-01

At the US Department of Energy's Savannah River Plant, corrosion of carbon steel storage tanks containing alkaline, high-level radioactive waste is controlled by specification of limits on waste composition and temperature. Processes for the preparation of waste for final disposal will result in waste with low corrosion inhibitor concentrations and, in some cases, high aromatic organic concentrations, neither of which are characteristic of previous operations. Laboratory tests, conducted to determine minimum corrosion inhibitor levels indicated pitting of carbon steel near the waterline for proposed storage conditions. In situ electrochemical measurements of full-scale radioactive process demonstrations have been conducted to assess the validity of laboratory tests. Probes included pH, Eh (potential relative to a standard hydrogen electrode), tank potential, and alloy coupons. In situ results are compared to those of the laboratory tests, with particular regard given to simulated solution composition. Transition metal hydroxide sludge contains strong passivating species for carbon steel. Washed precipitate contains organic species that lower solution pH and tend to reduce passivating films, requiring higher inhibitor concentrations than the 0.01 molar nitrite required for reactor fuel reprocessing wastes. Periodic agitation, to keep the organic phase suspended, or cathodic protection are possible alternatives to higher nitrite inhibitor concentrations

National Biocontainment Training Center

Science.gov (United States)

2015-02-01

BSL3 didactic BSL3 practical 1 1 Central Public Health Laboratory Ministry of Health and Population, Cairo, Egypt World Health Organization...courses taken. As expected the number of trainees follows the normal biosafety level pyramid with a large amount of BSL-2 trainees and then fewer as the...Distribution of trainees based on the courses taken. As expected the number of trainees follows the normal biosafety level pyramid with a large

Lead-iron phosphate glass as a containment medium for the disposal of high-level nuclear wastes

Science.gov (United States)

Boatner, L.A.; Sales, B.C.

1984-04-11

Disclosed are lead-iron phosphate glasses containing a high level of Fe/sub 2/O/sub 3/ for use as a storage medium for high-level radioactive nuclear waste. By combining lead-iron phosphate glass with various types of simulated high-level nuclear waste

Increase the Visibility of Microbial Growth in a Winogradsky Column by Substituting Diatomaceous Earth for Sediment

Directory of Open Access Journals (Sweden)

Thomas G. Benoit

2015-02-01

Full Text Available The difficulty students have seeing the color associated with microbial growth in a traditional Winogradsky column can be overcome by substituting diatomaceous earth (DE for sediment. Microbial growth in a DE column is visible from the early stages of ecological succession and the colors produced appear more vibrant. A flat-sided tissue culture flask can be used as a column container to provide a large surface area for observation. The enhanced visual experience provided by a DE column increases student engagement and learning. Editor's Note:The ASM advocates that students must successfully demonstrate the ability to explain and practice safe laboratory techniques. For more information, read the laboratory safety section of the ASM Curriculum Recommendations: Introductory Course in Microbiology and the Guidelines for Biosafety in Teaching Laboratories, available at www.asm.org. The Editors of JMBE recommend that adopters of the protocols included in this article follow a minimum of Biosafety Level 1 practices.

CLASSIFICATION OF THE MGR DEFENSE HIGH-LEVEL WASTE DISPOSAL CONTAINER SYSTEM

International Nuclear Information System (INIS)

J.A. Ziegler

1999-01-01

The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) defense high-level waste disposal container system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333PY ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Bullen, D.B.; Gdowski, G.E.

1988-08-01

Three copper-based alloys and three iron- to nickel-based austenitic alloys are being considered as possible materials for fabrication of high-level radioactive-waste disposal containers. The waste will include spent fuel assemblies from reactors as well as high-level waste in borosilicate glass and will be sent to the prospective site at Yucca Mountain, Nevada, for disposal. The copper-based alloy materials are CDA 102 (oxygen-free copper), CDA 613 (Cu-7Al), and CDA 715 (Cu-30Ni). The austenitic materials are Types 304L and 316L stainless steels and Alloy 825. The waste-package containers must maintain substantially complete containment for at least 300 yr and perhaps as long as 1000 yr, and they must be retrievable from the disposal site during the first 50 yr after emplacement. The containers will be exposed to high temperatures and high gamma radiation fields from the decay of high-level waste. This volume surveys the available data on the phase stability of both groups of candidate alloys. The austenitic alloys are reviewed in terms of the physical metallurgy of the iron-chromium-nickel system, martensite transformations, carbide formation, and intermetallic-phase precipitation. The copper-based alloys are reviewed in terms of their phase equilibria and the possibility of precipitation of the minor alloying constituents. For the austenitic materials, the ranking based on phase stability is: Alloy 825 (best), Type 316L stainless steel, and then Type 304L stainless steel (worst). For the copper-based materials, the ranking is: CDA 102 (oxygen-free copper) (best), and then both CDA 715 and CDA 613. 75 refs., 24 figs., 6 tabs

Water Level Flux in Household Containers in Vietnam - A Key Determinant of Aedes aegypti Population Dynamics

Science.gov (United States)

Jeffery, Jason A. L.; Clements, Archie C. A.; Nguyen, Yen Thi; Nguyen, Le Hoang; Tran, Son Hai; Le, Nghia Trung; Vu, Nam Sinh; Ryan, Peter A.; Kay, Brian H.

2012-01-01

We examined changes in the abundance of immature Aedes aegypti at the household and water storage container level during the dry-season (June-July, 2008) in Tri Nguyen village, central Vietnam. We conducted quantitative immature mosquito surveys of 171 containers in the same 41 households, with replacement of samples, every two days during a 29-day period. We developed multi-level mixed effects regression models to investigate container and household variability in pupal abundance. The percentage of houses that were positive for I/II instars, III/IV instars and pupae during any one survey ranged from 19.5–43.9%, 48.8–75.6% and 17.1–53.7%, respectively. The mean numbers of Ae. aegypti pupae per house ranged between 1.9–12.6 over the study period. Estimates of absolute pupal abundance were highly variable over the 29-day period despite relatively stable weather conditions. Most variability in pupal abundance occurred at the container rather than the household level. A key determinant of Ae. aegypti production was the frequent filling of the containers with water, which caused asynchronous hatching of Ae. aegypti eggs and development of cohorts of immatures. We calculated the probability of the water volume of a large container (>500L) increasing or decreasing by ≥20% to be 0.05 and 0.07 per day, respectively, and for small containers (<500L) to be 0.11 and 0.13 per day, respectively. These human water-management behaviors are important determinants of Ae. aegypti production during the dry season. This has implications for choosing a suitable Wolbachia strain for release as it appears that prolonged egg desiccation does not occur in this village. PMID:22911683

Seismic test for safety evaluation of low level radioactive wastes containers

International Nuclear Information System (INIS)

Ohoka, Makoto; Horikiri, Morito

1998-08-01

Seismic safety of three-piled container system used in Tokai reprocessing center was confirmed by seismic test and computational analysis. Two types of container were evaluated, for low level noninflammable radioactive solid wastes, and for used filters wrapped by large plastic bags. Seismic integrity of three-piled containers was confirmed by evaluating response characteristics such as acceleration and displacement under the design earthquake condition S1, which is the maximum earthquake expected at the stored site during the storage time. Computational dynamic analysis was also performed, and several conclusions described below were made. (1) Response characteristics of the bottom board and the side board were different. The number of pile did not affect the response characteristics of the bottom board of each container. They behaved as a rigid body. (2) The response of the side board was larger than that of the bottom board. (3) The response depended on the direction in each board, either side or bottom. The response acceleration became larger to the seismic wave perpendicular to the plane which has the entrance for fork lift and the radioactive warning mark. (4) The maximum horizontal response displacement under the S1 seismic wave was approximately 10 mm. It is so small that it does not affect the seismic safety. (5) The stoppers to prevent fall down had no influence to the response acceleration. (6) There was no fall down to the S1 seismic wave and 2 times of S1 seismic wave, which was the maximum input condition of the test. (7) The response of the bottom board of the containers, which are main elements of fall down, had good agreements both in the test and in the computational analysis. (author)

Corrosion behaviour of container materials for geological disposal of high level radioactive waste

International Nuclear Information System (INIS)

Accary, A.

1985-01-01

The disposal of high level radioactive waste in geological formations, based on the multibarrier concept, may include the use of a container as one of the engineered barriers. In this report the requirements imposed on this container and the possible degradation processes are reviewed. Further on an overview is given of the research being carried out by various research centres in the European Community on the assessment of the corrosion behaviour of candidate container materials. The results obtained on a number of materials under various testing conditions are summarized and evaluated. As a result, three promising materials have been selected for a detailed joint testing programme. It concerns two highly corrosion resistant alloys, resp. Ti-Pd (0.2 Pd%) and Hastelloy C4 and one consumable material namely a low carbon steel. Finally the possibilities of modelling the corrosion phenomena are discussed

The effect of fibre amount, energy level and viscosity of beverages containing oat fibre supplement on perceived satiety

DEFF Research Database (Denmark)

Lyly, Marika; Ohls, Nora; Lähteenmäki, Liisa

2010-01-01

at different dietary fibre (DF) concentrations, energy levels and viscosity levels. Design: A total of 29 healthy volunteers, age 1939, mean BMI 23.2 kg/m2 participated in this study. Measurement of subjective perceptions (satiety, fullness, hunger, desire to eat something/the sample food and thirst......) was performed during a 180-min period after ingestion of the sample. There were altogether six samples: two beverages without fibre at energy levels 700 and 1,400 kJ; two beverages containing 5 or 10 g oat DF (2.5 and 5 g oat b-glucan, respectively) at energy level 700 kJ, one beverage containing 10 g oat DF/1......,400 kJ and one beverage containing 10 g enzymatically treated oat DF with low viscosity at energy level 700 kJ. Each beverage portion weighted 300 g. The order of the samples was randomised for each subject and evaluated during six separate days. The results are reported in three sets of samples: 'fibre...

MODELING THE CORROSION OF HIGH-LEVEL WASTE CONTAINERS CAM-CRM INTERFACE

International Nuclear Information System (INIS)

JOSEPH C. FARMER, PETER J. BEDROSSIAN, R. DANIEL MCCRIGHT

1998-01-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological repository at Yucca Mountain, Nevada is a two-layer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as carbon steel or Monel400. Initially, the containers will be hot and dry due to the heat generated by radioactive decay. However, the temperature will eventually drop to levels where both humid air and aqueous phase corrosion will be possible. As the outer barrier is penetrated, uniform corrosion of the CRM will be possible in exfoliated areas. The possibility for crevice formation between the CAM and CRM will also exist. In the case of either Alloy 625 or C-22, a crevice will have to form before significant penetration of the CRM can occur. Crevice corrosion of the CRMs has been well documented. Lillard and Scully have induced crevice corrosion in Alloy 625 during exposure to artificial sea water. Jones and Wilde have prepared simulated crevice solutions of FeCl 2 , NiCl 2 and CrCl 3 , and measured substantial pH suppression. Asphahani measured the dissolution rates of Alloys 625 and C-22 in such artificial crevice solutions at various temperatures. Others have observed no significant localized attack in less severe environments

Inactivation of RNA Viruses by Gamma Irradiation: A Study on Mitigating Factors

Directory of Open Access Journals (Sweden)

Adam J. Hume

2016-07-01

Full Text Available Effective inactivation of biosafety level 4 (BSL-4 pathogens is vital in order to study these agents safely. Gamma irradiation is a commonly used method for the inactivation of BSL-4 viruses, which among other advantages, facilitates the study of inactivated yet morphologically intact virions. The reported values for susceptibility of viruses to inactivation by gamma irradiation are sometimes inconsistent, likely due to differences in experimental protocols. We analyzed the effects of common sample attributes on the inactivation of a recombinant vesicular stomatitis virus expressing the Zaire ebolavirus glycoprotein and green fluorescent protein. Using this surrogate virus, we found that sample volume and protein content of the sample modulated viral inactivation by gamma irradiation but that air volume within the sample container and the addition of external disinfectant surrounding the sample did not. These data identify several factors which alter viral susceptibility to inactivation and highlight the usefulness of lower biosafety level surrogate viruses for such studies. Our results underscore the need to validate inactivation protocols of BSL-4 pathogens using “worst-case scenario” procedures to ensure complete sample inactivation.

Selection of candidate canister materials for high-level nuclear waste containment in a tuff repository

International Nuclear Information System (INIS)

McCright, R.D.; Weiss, H.; Juhas, M.C.; Logan, R.W.

1983-11-01

A repository located at Yucca Mountain at the Nevada Test Site is a potential site for permanent geological disposal of high-level nuclear waste. The repository can be located in a horizon in welded tuff, a volcanic rock, which is above the static water level at this site. The environmental conditions in this unsaturated zone are expected to be air and water vapor dominated for much of the containment period. Type 304L stainless steel is the reference material for fabricating canisters to contain the solid high-level wastes. Alternative stainless alloys are considered because of possible susceptibility of 304L to localized and stress forms of corrosion. For the reprocessed glass wastes, the canisters serve as the recipient for pouring the glass with the result that a sensitized microstructure may develop because of the times at elevated temperatures. Corrosion testing of the reference and alternative materials has begun in tuff-conditioned water and steam environments. 21 references, 8 figures, 8 tables

Containing and discarding method for radiation contaminated materials and radiation contaminated material containing composite member

International Nuclear Information System (INIS)

Akagawa, Katsuhiko.

1995-01-01

A container for high level radiation contaminated materials is loaded in an outer container in a state of forming a gap between the outer container and a container wall, low level radiation contaminated materials are filled to the gap between the container of the radiation contaminated materials and the container wall, and then the outer container is sealed. In addition, the thickness of the layer of the low level radiation contaminated materials is made substantially uniform. Then, since radiation rays from the container of the radiation contaminated materials are decayed by the layer of the low level radiation contaminated materials at the periphery of the container and the level of the radiation rays emitted from the outer container is extremely reduced than in a case where the entire amount of high level radiation contaminated materials are filled, the level is suppressed to an extent somewhat higher than the level in the case where the entire amount of the low level radiation contaminated materials are filled. Accordingly, the management corresponds to that for the low level radiation contaminated materials, and the steps for the management and the entire volume thereof are reduced than in a case where the high level radiation contaminated materials and the low level radiation contaminated materials are sealed separately. (N.H.)

Hydraulic containment of low-level radioactive waste disposal sites: [Final technical report

International Nuclear Information System (INIS)

Ostendorf, D.W.; Noss, R.R.; Miller, A.B.; Phillips, H.S.

1987-01-01

This document describes the use of impermeable barriers for the containment of liquid radioactive wastes at low-level radioactive waste disposal sites. Included are a review of existing barrier systems, assessments of laboratory and field data, and simulations of system performance under humid and arid conditions. Alternatives are identified as the most promising of the existing systems based on retention of irradiated water, field installation feasibility, and response to aggressive permeation. In decreasing order of preference, the favored systems are asphalt slurry, high density polyethylene synthetic liner, polyvinyl chloride synthetic liner, lean portland cement concrete, and compacted bentonite liner. It should be stressed that all five of these alternatives effectively retain irradiated water in the humid and arid simulations. Recommendations on the design and operation of the hydraulic containment system and suggestions on avenues for future research are included. 102 refs., 27 figs., 23 tabs

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 3. Aerobiology.

Science.gov (United States)

Bohannon, J Kyle; Janosko, Krisztina; Holbrook, Michael R; Barr, Jason; Pusl, Daniela; Bollinger, Laura; Coe, Linda; Hensley, Lisa E; Jahrling, Peter B; Wada, Jiro; Kuhn, Jens H; Lackemeyer, Matthew G

2016-10-03

Aerosol or inhalational studies of high-consequence pathogens have recently been increasing in number due to the perceived threat of intentional aerosol releases or unexpected natural aerosol transmission. Specific laboratories designed to perform these experiments require tremendous engineering controls to provide a safe and secure working environment and constant systems maintenance to sustain functionality. Class III biosafety cabinets, also referred to as gloveboxes, are gas-tight enclosures with non-opening windows. These cabinets are maintained under negative pressure by double high-efficiency-particulate-air (HEPA)-filtered exhaust systems and are the ideal primary containment for housing aerosolization equipment. A well planned workflow between staff members within high containment from, for instance, an animal biosafety level-4 (ABSL-4) suit laboratory to the ABSL-4 cabinet laboratory is a crucial component for successful experimentation. For smooth study execution, establishing a communication network, moving equipment and subjects, and setting up and placing equipment, requires staff members to meticulously plan procedures prior to study initiation. Here, we provide an overview and a visual representation of how aerobiology research is conducted at the National Institutes of Health, National Institute of Allergy and Infectious Diseases Integrated Research Facility at Fort Detrick, Maryland, USA, within an ABSL-4 environment.

Basic approach to the disposal of low level radioactive waste generated from nuclear reactors containing comparatively high radioactivity

International Nuclear Information System (INIS)

Moriyama, Yoshinori

1998-01-01

Low level radioactive wastes (LLW) generated from nuclear reactors are classified into three categories: LLW containing comparatively high radioactivity; low level radioactive waste; very low level radioactive waste. Spent control rods, part of ion exchange resin and parts of core internals are examples of LLW containing comparatively high radioactivity. The Advisory Committee of Atomic Energy Commission published the report 'Basic Approach to the Disposal of LLW from Nuclear Reactors Containing Comparatively High Radioactivity' in October 1998. The main points of the proposed concept of disposal are as follows: dispose of underground deep enough not be disturb common land use (e.g. 50 to 100 m deep); dispose of underground where radionuclides migrate very slowly; dispose of with artificial engineered barrier which has the same function as the concrete pit; control human activities such as land use of disposal site for a few hundreds years. (author)

Containment structure optimization

International Nuclear Information System (INIS)

Putman, S.; Walser, A.

1979-01-01

The major design features investigated are: dome shape, the prestress level provided to counteract accident pressure, the effect of diameter variation, and the design pressure used to size the containment. The optimum dome shape and optimum prestress level are used to investigate the effect of variations in diameter and design pressure on containment cost. The containment internal diameter is fixed at 150 feet for investigation of dome shape, prestress level and design prestress. A hemispherical dome containment with a prestress level of 1.25 P/sub a/ is recommended regardless of design pressure selected. A design pressure of 60 psi is recommended. No significant cost penalty is associated with diameter variation in the range of 145 to 155 feet

Problems in the design and specification of containers for vitrified high-level liquid waste

International Nuclear Information System (INIS)

Corbet, A.D.W.; Hall, G.G.; Spiller, G.T.

1976-01-01

In the United Kingdom the growing problem of ensuring the safe storage of high-level liquid waste over long time scales has led to a policy for implementing solidification. A brief description is given of the HARVEST vitrification process, which is essentially a scaled-up version of the FINGAL process with increased throughput. The functional requirements of the container are considered. It must be made of a material which can be fabricated to a high standard. Diameters up to 600 mm for right circular cylindrical containers and 1200 mm for annular containers are contemplated. Computer aids for axisymmetric and three-dimensional heat transfer and stress analysis are identified. One example is given of the thermal profile for the cylindrical container in the furnace and another example for the annular container following an accident condition. Measured values are given for high temperature oxidation, emissivity and the short-term creep strength of various alloys. Corrosion in fresh water and sea water over long time periods and leaching of partially exposed solid waste are discussed and a conceptual package for sea bed disposal is described. The relative merits of the different methods of manufacture are pointed out and the paper concludes that HK-40 or better INCOLOY alloy 800L are suitable materials of construction. (author)

A Biosafety Level 2 Virology Lab for Biotechnology Undergraduates

Science.gov (United States)

Matza-Porges, Sigal; Nathan, Dafna

2017-01-01

Medical, industrial, and basic research relies heavily on the use of viruses and vectors. Therefore, it is important that bioscience undergraduates learn the practicalities of handling viruses. Teaching practical virology in a student laboratory setup presents safety challenges, however. The aim of this article is to describe the design and…

Chemical durability of borosilicate glasses containing simulated high-level nuclear wastes, 1

International Nuclear Information System (INIS)

Hara, Shigeo; Terai, Ryohei; Yamanaka, Hiroshi

1983-01-01

The Soxhlet-type leaching test apparatus has been developed to evaluate the chemical durability of some borosilicate glasses containing simulated High-Level nuclear Wastes, HLW. After the leaching over the temperature range of 50 0 -95 0 C, the weight loss of specimens with time was determined on both the samples of blocks and grains, and various components dissolved into water were analyzed by atomic absorption and colorimetry technique. It was found that Soxhlet-type test method was more useful than JIS test method, because the specimens in Soxhlet type apparatus were forced always to react with pure water and the mechanism of leaching could be evaluate accurately. The chemical durability of commercial glasses decreases generally with increasing of alkali contents in glasses. In the case of these borosilicate glasses containing HLW, however, the leachability was apparently independent on the alkali contents because of the complexity of these glass compositions. The variation of leaching rate with temperature suggests that dissolution mechanism changes with temperature. (author)

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 2. General Practices.

Science.gov (United States)

Mazur, Steven; Holbrook, Michael R; Burdette, Tracey; Joselyn, Nicole; Barr, Jason; Pusl, Daniela; Bollinger, Laura; Coe, Linda; Jahrling, Peter B; Lackemeyer, Matthew G; Wada, Jiro; Kuhn, Jens H; Janosko, Krisztina

2016-10-03

Work in a biosafety level 4 (BSL-4) containment laboratory requires time and great attention to detail. The same work that is done in a BSL-2 laboratory with non-high-consequence pathogens will take significantly longer in a BSL-4 setting. This increased time requirement is due to a multitude of factors that are aimed at protecting the researcher from laboratory-acquired infections, the work environment from potential contamination and the local community from possible release of high-consequence pathogens. Inside the laboratory, movement is restricted due to air hoses attached to the mandatory full-body safety suits. In addition, disinfection of every item that is removed from Class II biosafety cabinets (BSCs) is required. Laboratory specialists must be trained in the practices of the BSL-4 laboratory and must show high proficiency in the skills they are performing. The focus of this article is to outline proper procedures and techniques to ensure laboratory biosafety and experimental accuracy using a standard viral plaque assay as an example procedure. In particular, proper techniques to work safely in a BSL-4 environment when performing an experiment will be visually emphasized. These techniques include: setting up a Class II BSC for experiments, proper cleaning of the Class II BSC when finished working, waste management and safe disposal of waste generated inside a BSL-4 laboratory, and the removal of inactivated samples from inside a BSL-4 laboratory to the BSL-2 laboratory.

Serum PCB levels and congener profiles among teachers in PCB-containing schools: a pilot study

Science.gov (United States)

2011-01-01

Background PCB contamination in the built environment may result from the release of PCBs from building materials. The significance of this contamination as a pathway of human exposure is not well-characterized, however. This research compared the serum PCB concentrations, and congener profiles between 18 teachers in PCB-containing schools and referent populations. Methods Blood samples from 18 teachers in PCB-containing schools were analyzed for 57 PCB congeners. Serum PCB concentrations and congener patterns were compared between the teachers, to the 2003-4 NHANES (National Health and Nutrition Examination Survey) data, and to data from 358 Greater Boston area men. Results Teachers at one school had higher levels of lighter (PCB 6-74) congeners compared to teachers from other schools. PCB congener 47 contributed substantially to these elevated levels. Older teachers (ages 50-64) from all schools had higher total (sum of 33 congeners) serum PCB concentrations than age-comparable NHANES reference values. Comparing the teachers to the referent population of men from the Greater Boston area (all under age 51), no difference in total serum PCB levels was observed between the referents and teachers up to 50 years age. However, the teachers had significantly elevated serum concentrations of lighter congeners (PCB 6-74). This difference was confirmed by comparing the congener-specific ratios between groups, and principal component analysis showed that the relative contribution of lighter congeners differed between the teachers and the referents. Conclusions These findings suggest that the teachers in the PCB-containing buildings had higher serum levels of lighter PCB congeners (PCB 6-74) than the referent populations. Examination of the patterns, as well as concentrations of individual PCB congeners in serum is essential to investigating the contributions from potential environmental sources of PCB exposure. PMID:21668970

Occupational HIV Infection in a Research Laboratory With Unknown Mode of Transmission: A Case Report.

Science.gov (United States)

Soria, Alessandro; Alteri, Claudia; Scarlatti, Gabriella; Bertoli, Ada; Tolazzi, Monica; Balestra, Emanuela; Bellocchi, Maria Concetta; Continenza, Fabio; Carioti, Luca; Biasin, Mara; Trabattoni, Daria; Bandera, Alessandra; Ceccherini-Silberstein, Francesca; Perno, Carlo Federico; Gori, Andrea

2017-03-15

A laboratory worker was infected with human immunodeficiency virus (HIV) type 1 in a biosafety level 2 containment facility, without any apparent breach. Through full-genome sequencing and phylogenetic analyses, we could identify the source of infection in a replication-competent clone that unknowingly contaminated a safe experiment. Mode of transmission remains unclear. Caution is warranted when handling HIV-derived constructs. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Research

African Journals Online (AJOL)

raoul

2012-02-03

Feb 3, 2012 ... Biosafety is described as a safe method for managing infectious agents in laboratory environment where they are handled and maintained. .... screw caped container and bottles are so important to safe work area. Although ...

Selection criteria for container materials at the proposed Yucca Mountain high level nuclear waste repository

International Nuclear Information System (INIS)

Halsey, W.G.

1989-11-01

A geological repository has been proposed for the permanent disposal of the nation's high level nuclear waste at Yucca Mountain in the Nevada desert. The containers for this waste must remain intact for the unprecedented service lifetime of 1000 years. A combination of engineering, regulatory, and licensing requirements complicate the container material selection. In parallel to gathering information regarding the Yucca Mountain service environment and material performance data, a set of selection criteria have been established which compare candidate materials to the performance requirements, and allow a quantitative comparison of candidates. These criteria assign relative weighting to varied topic areas such as mechanical properties, corrosion resistance, fabricability, and cost. Considering the long service life of the waste containers, it is not surprising that the corrosion behavior of the material is a dominant factor. 7 refs

Covering Note for INTER-ACADEMY REPORT ON GM CROPS ...

Indian Academy of Sciences (India)

insa

the Minister of Science for Environment & Forests early this year on commercialisation of Bt brinjal (Ref. .... contained field trials and multi-location research trials as well as bio-safety. A Monitoring ..... This should include qualitative as well as.

Fabrication and closure development of corrosion resistant containers for Nevada's Yucca Mountain high-level nuclear waste repository

International Nuclear Information System (INIS)

Russell, E.W.; Nelson, T.A.; Domian, H.A.; LaCount, D.F.; Robitz, E.S.; Stein, K.O.

1989-11-01

US Congress and the President have determined that the Yucca Mountain site in Nevada is to be characterized to determine its suitability for construction of the first US high-level nuclear waste repository. Work in connection with this site is carried out within the Yucca Mountain Project (YMP). Lawrence Livermore National Laboratory (LLNL) has the responsibility for designing, developing, and projecting the performance of the waste package for the permanent storage of high-level nuclear waste. Babcock ampersand Wilcox (B ampersand W) is involved with the YMP as a subcontractor to LLNL. B ampersand W's role is to recommend and demonstrate a method for fabricating the metallic waste container and a method for performing the final closure of the container after it has been filled with waste. Various fabrication and closure methods are under consideration for the production of containers. This paper presents progress to date in identifying and evaluating the candidate manufacturing processes. 2 refs., 2 figs., 4 tabs

Corrosion of container materials for disposal of high-level radioactive wastes

Energy Technology Data Exchange (ETDEWEB)

Chun, K.S.; Park, H.S.; Yeon, J.W.; Ha, Y.K. [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-01-01

In the corrosion aspect of container for the deep geological disposal of high-level radioactive waste, disposal concepts and the related container materials, which have been developed by advanced countries, have been reviewed. The disposal circumstances could be divided into the saturated and the unsaturated zones. The candidate materials in the countries, which consider the disposal in the unsaturated zone, are the corrosion resistant materials such as supper alloys and stainless steels, but those in the saturated zone is cupper, one of the corrosion allowable materials. By the results of the pitting corrosion test of sensitized stainless steels (such as 304, 304L, 316 and 316L), pitting potential is decreased with the degree of sensitization and the pitting corrosion resistance of 316L is higher than others. And so, the long-term corrosion experiment with 316L stainless steel specimens, sebsitized and non-sensitized, under the compacted bentonite and synthetic granitic groundwater has been being carried out. The results from the experiment for 12 months indicate that no evidence of pitting corrosion of the specimens has been observed but the crevice corrosion has occurred on the sensitized specimens even for 3 months. (author). 33 refs., 19 figs., 10 tabs.

Implementation of a personnel reliability program as a facilitator of biosafety and biosecurity culture in BSL-3 and BSL-4 laboratories.

Science.gov (United States)

Higgins, Jacki J; Weaver, Patrick; Fitch, J Patrick; Johnson, Barbara; Pearl, R Marene

2013-06-01

In late 2010, the National Biodefense Analysis and Countermeasures Center (NBACC) implemented a Personnel Reliability Program (PRP) with the goal of enabling active participation by its staff to drive and improve the biosafety and biosecurity culture at the organization. A philosophical keystone for accomplishment of NBACC's scientific mission is simultaneous excellence in operations and outreach. Its personnel reliability program builds on this approach to: (1) enable and support a culture of responsibility based on human performance principles, (2) maintain compliance with regulations, and (3) address the risk associated with the insider threat. Recently, the Code of Federal Regulations (CFR) governing use and possession of biological select agents and toxins (BSAT) was amended to require a pre-access suitability assessment and ongoing evaluation for staff accessing Tier 1 BSAT. These 2 new requirements are in addition to the already required Federal Bureau of Investigation (FBI) Security Risk Assessment (SRA). Two years prior to the release of these guidelines, NBACC developed its PRP to supplement the SRA requirement as a means to empower personnel and foster an operational environment where any and all work with BSAT is conducted in a safe, secure, and reliable manner.

40 CFR 63.922 - Standards-Container Level 1 controls.

Science.gov (United States)

2010-07-01

... (DOT) regulations on packaging hazardous materials for transportation as specified in paragraph (f) of... on a roll-off box) or may be an integral part of the container structural design (e.g., a bulk cargo...) of this section, containers shall be used that meet the applicable U.S. DOT regulations on packaging...

Modeling the corrosion of high-level waste containers: CAM-CRM interface

International Nuclear Information System (INIS)

Farmer, J.C.; Bedrossian, P.J.; McCright, R.D.

1998-06-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological respository at Yucca Mountain, Nevada is a two-layer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 825, 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as A516 or Monel 400. At the present time, Alloy C-22 and A516 are favored. This publication addresses the development of models to account for corrosion of Alloy C-22 surfaces exposed directly to the Near Field Environmental (NFE), as well as to the exacerbated conditions in the CAM-CRM crevice

Study on the design and manufacturing requirements of container for low level radioactive solid waste form KRR decommissioning

International Nuclear Information System (INIS)

Lee, D. K.; Kim, H. R.; Park, S. K.; Jung, K. H.; Jung, W. S.; Jung, K. J.

2000-01-01

The design requirement and manufacturing criteria have been proposed on the container for the storage and transportation of low level radioactive solid waste from decommissioning of KRR 1 and 2. The structure analysis was carried out based on the design criteria, and the safety of the container was assessed. The ISO container with its capacity of 4m 3 was selected for the radioactive solid waste storage. The proposed container was satisfied the criteria of ISO 1496/1 and the packaging standard of atomic energy act. manufacturing and test standards of IAEA were also applied to the container. Stress distribution and deformation were analyzed under given condition using ANSYS code, and the maximum stress was verified to be within yield stress without any structural deformation. From the results of lifting tests, it was verified that the container was safe

Maternal educational level and preschool children's consumption of high-calorie snacks and sugar-containing beverages: mediation by the family food environment.

Science.gov (United States)

Wijtzes, Anne I; Jansen, Wilma; Jansen, Pauline W; Jaddoe, Vincent W V; Hofman, Albert; Raat, Hein

2013-11-01

To examine the associations between maternal educational level and preschoolers' consumption of high-calorie snacks and sugar-containing beverages, and to assess the mediating effects of variables relating to the family food environment. We analyzed data from 2814 native Dutch preschoolers enrolled in a birth cohort study in Rotterdam (the Netherlands), between 2002 and 2006. Logistic regression models were used to calculate odds ratios of snacking ≥ 2 times/day and consuming sugar-containing beverages ≥ 3 glasses/day for children of mothers with low, mid-low, and mid-high educational levels (reference group: high educational level), before and after adjustment for mediators. Children of low and mid-low educated mothers were significantly more likely to consume excessive amounts of high-calorie snacks and sugar-containing beverages compared with children of high educated mothers, with the highest odds in children of low educated mothers (OR: 2.44; 95% CI: 1.84, 3.23 and OR: 2.46; 95% CI: 1.87, 3.24 respectively). Parental feeding practices, parental consumption of sugar-containing beverages, and children's television time partly explained these associations. Maternal educational level is inversely related to preschoolers' consumption of high-calorie snacks and sugar-containing beverages. Targeting the family food environment may be an effective way of reducing educational inequalities in children's unhealthy dietary behaviors. © 2013.

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

Energy Technology Data Exchange (ETDEWEB)

Strum, M.J.; Weiss, H.; Farmer, J.C. (Lawrence Livermore National Lab., CA (USA)); Bullen, D.B. (Science and Engineering Associates, Inc., Pleasanton, CA (USA))

1988-06-01

This volume surveys the effects of welding on the degradation modes of three austenitic alloys: Types 304L and 316L stainless steels and Alloy 825. These materials are candidates for the fabrication of containers for the long-term storage of high-level nuclear waste. The metallurgical characteristics of fusion welds are reviewed here and related to potential degradation modes of the containers. Three specific areas are discussed in depth: (1) decreased resistance to corrosion in the forms of preferential corrosion, sensitization, and susceptibility to stress corrosion cracking, (2) hot cracking in the heat-affected zone and the weld zone, and (3) formation of intermetallic phases. The austenitic alloys are ranked as follows in terms of overall weldability: Alloy 825 (best) > Type 316L stainless steel > Type 304L stainless steel (worst). 108 refs., 31 figs., 7 tabs.

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Strum, M.J.; Weiss, H.; Farmer, J.C.; Bullen, D.B.

1988-06-01

This volume surveys the effects of welding on the degradation modes of three austenitic alloys: Types 304L and 316L stainless steels and Alloy 825. These materials are candidates for the fabrication of containers for the long-term storage of high-level nuclear waste. The metallurgical characteristics of fusion welds are reviewed here and related to potential degradation modes of the containers. Three specific areas are discussed in depth: (1) decreased resistance to corrosion in the forms of preferential corrosion, sensitization, and susceptibility to stress corrosion cracking, (2) hot cracking in the heat-affected zone and the weld zone, and (3) formation of intermetallic phases. The austenitic alloys are ranked as follows in terms of overall weldability: Alloy 825 (best) > Type 316L stainless steel > Type 304L stainless steel (worst). 108 refs., 31 figs., 7 tabs

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

Energy Technology Data Exchange (ETDEWEB)

Farmer, J.C.; Van Konynenburg, R.A.; McCright, R.D. (Lawrence Livermore National Lab., CA (USA)); Bullen, D.B. (Science and Engineering Associates, Inc., Pleasanton, CA (USA))

1988-04-01

Three iron- to nickel-based austenitic alloys (Types 304L and 316L stainless steels and Alloy 825) are being considered as candidate materials for the fabrication of high-level radioactive-waste containers. Waste will include fuel assemblies from reactors as well as high-level waste in borosilicate glass forms, and will be sent to the prospective repository at Yucca Mountain, Nevada. The decay of radionuclides in the repository will result in the generation of substantial heat and in fluences of gamma radiation. Container materials may undergo any of several modes of degradation in this environment, including atmospheric oxidation; uniform aqueous phase corrosion; pitting; crevice corrosion; sensitization and intergranular stress corrosion cracking (IGSCC); and transgranular stress corrosion cracking (TGSCC). This report is an analysis of data relevant to the pitting, crevice corrosion, and stress corrosion cracking (SCC) of the three austenitic candidate alloys. The candidates are compared in terms of their susceptibilities to these forms of corrosion. Although all three candidates have demonstrated pitting and crevice corrosion in chloride-containing environments, Alloy 825 has the greatest resistance to these types of localized corrosion (LC); such resistance is important because pits can penetrate the metal and serve as crack initiation sites. Both Types 304L and 316L stainless steels are susceptible to SCC in acidic chloride media. In contrast, SCC has not been documented in Alloy 825 under comparable conditions. Gamma radiation has been found to enhance SCC in Types 304 and 304L stainless steels, but it has no detectable effect on the resistance of Alloy 825 to SCC. Furthermore, while the effects of microbiologically induced corrosion have been observed for 300-series stainless steels, nickel-based alloys such as Alloy 825 seem to be immune to such problems. 211 refs., 49 figs., 10 tabs.

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Farmer, J.C.; Van Konynenburg, R.A.; McCright, R.D.; Bullen, D.B.

1988-04-01

Three iron- to nickel-based austenitic alloys (Types 304L and 316L stainless steels and Alloy 825) are being considered as candidate materials for the fabrication of high-level radioactive-waste containers. Waste will include fuel assemblies from reactors as well as high-level waste in borosilicate glass forms, and will be sent to the prospective repository at Yucca Mountain, Nevada. The decay of radionuclides in the repository will result in the generation of substantial heat and in fluences of gamma radiation. Container materials may undergo any of several modes of degradation in this environment, including atmospheric oxidation; uniform aqueous phase corrosion; pitting; crevice corrosion; sensitization and intergranular stress corrosion cracking (IGSCC); and transgranular stress corrosion cracking (TGSCC). This report is an analysis of data relevant to the pitting, crevice corrosion, and stress corrosion cracking (SCC) of the three austenitic candidate alloys. The candidates are compared in terms of their susceptibilities to these forms of corrosion. Although all three candidates have demonstrated pitting and crevice corrosion in chloride-containing environments, Alloy 825 has the greatest resistance to these types of localized corrosion (LC); such resistance is important because pits can penetrate the metal and serve as crack initiation sites. Both Types 304L and 316L stainless steels are susceptible to SCC in acidic chloride media. In contrast, SCC has not been documented in Alloy 825 under comparable conditions. Gamma radiation has been found to enhance SCC in Types 304 and 304L stainless steels, but it has no detectable effect on the resistance of Alloy 825 to SCC. Furthermore, while the effects of microbiologically induced corrosion have been observed for 300-series stainless steels, nickel-based alloys such as Alloy 825 seem to be immune to such problems. 211 refs., 49 figs., 10 tabs

A biosafety evaluation of synchrotron radiation X-ray to skin and bone marrow: single dose irradiation study of rats and macaques.

Science.gov (United States)

Lu, Yifan; Tang, Guanghui; Lin, Hui; Lin, Xiaojie; Jiang, Lu; Yang, Guo-Yuan; Wang, Yongting

2017-06-01

Very limited experimental data is available regarding the safe dosages related to synchrotron radiation (SR) procedures. We used young rats and macaques to address bone marrow and skin tolerance to various doses of synchrotron radiation. Rats were subjected to 0, 0.5, 2.5, 5, 25 or 100 Gy local SR X-ray irradiation at left hind limb. Rat blood samples were analyzed at 2-90 days after irradiation. The SR X-ray irradiated skin and tibia were sectioned for morphological examination. For non-human primate study, three male macaques were subjected to 0.5 or 2.5 Gy SR X-ray on crus. Skin responses of macaques were observed. All rats that received SR X-ray irradiation doses greater than 2.5 Gy experienced hair loss and bone-growth inhibition, which were accompanied by decreased number of follicles, thickened epidermal layer, and decreased density of bone marrow cells (p X-ray but showed significant hair loss when the dose was raised above 2.5 Gy. The safety threshold doses of SR X-ray for rat skin, bone marrow and macaque skin are between 0.5 and 2.5 Gy. Our study provided essential information regarding the biosafety of SR X-ray irradiation.

IMPROVEMENTS IN CONTAINER MANAGEMENT OF TRANSURANIC (TRU) AND LOW LEVEL RADIOACTIVE WASTE STORED AT THE CENTRAL WASTE COMPLEX (CWC) AT HANFORD

International Nuclear Information System (INIS)

UYTIOCO EM

2007-01-01

The Central Waste Complex (CWC) is the interim storage facility for Resource Conservation and Recovery Act (RCRA) mixed waste, transuranic waste, transuranic mixed waste, low-level and low-level mixed radioactive waste at the Department of Energy's (DOE'S) Hanford Site. The majority of the waste stored at the facility is retrieved from the low-level burial grounds in the 200 West Area at the Site, with minor quantities of newly generated waste from on-site and off-site waste generators. The CWC comprises 18 storage buildings that house 13,000 containers. Each waste container within the facility is scanned into its location by building, module, tier and position and the information is stored in a site-wide database. As waste is retrieved from the burial grounds, a preliminary non-destructive assay is performed to determine if the waste is transuranic (TRU) or low-level waste (LLW) and subsequently shipped to the CWC. In general, the TRU and LLW waste containers are stored in separate locations within the CWC, but the final disposition of each waste container is not known upon receipt. The final disposition of each waste container is determined by the appropriate program as process knowledge is applied and characterization data becomes available. Waste containers are stored within the CWC based on their physical chemical and radiological hazards. Further segregation within each building is done by container size (55-gallon, 85-gallon, Standard Waste Box) and waste stream. Due to this waste storage scheme, assembling waste containers for shipment out of the CWC has been time consuming and labor intensive. Qualitatively, the ratio of containers moved to containers in the outgoing shipment has been excessively high, which correlates to additional worker exposure, shipment delays, and operational inefficiencies. These inefficiencies impacted the LLW Program's ability to meet commitments established by the Tri-Party Agreement, an agreement between the State of Washington

76 FR 63891 - Foreign Quarantine; Etiological Agents, Hosts, and Vectors

Science.gov (United States)

2011-10-14

... applicants possess written biosafety plans and already follow standard biosafety practices and procedures... CFR 71.54 A. Section Heading & Definitions B. Biosafety and Inspection Provisions [[Page 63892

A container for containing and protecting a radioactive substance

International Nuclear Information System (INIS)

1974-01-01

The invention relates to a container adapted to contain and protect a radio-active substance. That container comprises a heat sensitive device for automatically (and, preferably, sealingly) enclosing and protecting the radio-active substance, should room temperature reach a predetermined level. Thus, the radio-active substance cannot escape in case of fire. Preferably, a bolt is also provided, capable of being actuated at a temperature slightly above the temperature actuating the protective device so as to maintain the radioactive substance protected. This can be applied to containers containing a radio-active substance such as polonium 210 [fr

Electrochemical probing of high-level radioactive waste tanks containing washed sludge and precipitates

International Nuclear Information System (INIS)

Bickford, D.F.; Congdon, J.W.; Oblath, S.B.

1987-01-01

At the U.S. Department of Energy's Savannah River Plant, corrosion of carbon steel storage tanks containing alkaline, high-level radioactive waste is controlled by specification of limits on waste composition and temperature. Processes for the preparation of waste for final disposal will result in waste with low corrosion inhibitor concentrations and, in some cases, high aromatic organic concentrations, neither of which are characteristic of previous operations. Laboratory tests, conducted to determine minimum corrosion inhibitor levels indicated pitting of carbon steel near the waterline for proposed storage conditions. In situ electrochemical measurements of full-scale radioactive process demonstrations have been conducted to assess the validity of laboratory tests. Probes included pH, Eh (potential relative to a standard hydrogen electrode), tank potential, and alloy coupons. In situ results are compared to those of the laboratory tests, with particular regard given to simulated solution composition

Design study on containers for geological disposal of high-level radioactive waste. Phase 2

International Nuclear Information System (INIS)

1986-01-01

This study has considered the feasibility of three designs for containers which would isolate the waste from the environment for a minimum period of 500 to 1000 years. The candidate container designs were taken from the results of a previous study by Ove Arup and Partners (1985) and were developed as the study progressed. Their major features can be summarized as follows: Type A: A thin-walled corrosion-resistant metal shell filled with lead or cement grout. Type B: An unfilled thick-walled carbon steel shell. Type C: an unfilled carbon steel shell plated externally with corrosion-resistant metal. Reference repository conditions in clay, granite and salt, reference disposal operations and metals corrosion data have been taken from various European Community radioactive waste management research and engineering projects. The study concludes that design types A and B are feasible in manufacturing terms but design Type C is not. Furthermore, a titanium-palladium alloy is considered the most suitable metal for Type A container shells and lead is the preferred filler. The analysis shows that design Types A and B both have adequate resistance to pressure and temperature loadings and both would resist accidental impact damage when upright. A reduction in waste heat output at disposal would lower the stress levels in Type A containers but would have virtually no effect on Type B. There is insufficient data to compare the relative costs and benefits of design Types A and B. In conclusion design Types A and B are both considered feasible but Type A would require more development than Type B. In both cases further research is needed to confirm the long-term corrosion performance of the candidate materials. It is recommended that model containers should be produced to demonstrate the proposed methods of manufacture and that they should be tested to validate the analytical techniques used

Repeated intraperitoneal injections of liposomes containing phosphatidic acid and cardiolipin reduce amyloid-β levels in APP/PS1 transgenic mice

DEFF Research Database (Denmark)

Ordóñez-Gutiérrez, Lara; Re, Francesca; Bereczki, Erika

2015-01-01

, it was hypothesized that shifting this equilibrium towards the blood by enhancing peripheral clearance might reduce Aβ levels in the brain: the 'sink effect'. We tested this hypothesis by intraperitoneally injecting APP/PS1 transgenic mice with small unilamellar vesicles containing either phosphatidic acid...... Aβ may be therapeutically relevant in AD. FROM THE CLINICAL EDITOR: Intraperitoneal injection of small unilamellar vesicles containing phosphatidic acid or cardiolipin significantly reduced the amount of amyloid-beta (Aß) peptide in the plasma in a rodent model. Brain levels of Aß were also affected...

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Farmer, J.C.; Van Konynenburg, R.A.; McCright, R.D.; Gdowski, G.E.

1988-06-01

Three copper-based alloys, CDA 102 (oxygen-free, high-purity copper), CDA 613 (aluminum bronze), and CDA 715 (Cu-30Ni), are candidates for the fabrication of high-level radioactive-waste disposal containers. Waste will include spent fuel assemblies from reactors as well as borosilicate glass, and will be sent to the prospective repository site at Yucca Mountain in Nye County, Nevada. The decay of radionuclides will result in the generation of substantial heat and in fluxes of gamma radiation outside the containers. In this environment, container materials might degrade by atmospheric oxidation, general aqueous phase corrosion, localized corrosion (LC), and stress corrosion cracking (SCC). This volume is a critical survey of available data on pitting and crevice corrosion of the copper-based candidates. Pitting and crevice corrosion are two of the most common forms of LC of these materials. Data on the SCC of these alloys is surveyed in Volume 4. Pitting usually occurs in water that contains low concentrations of bicarbonate and chloride anions, such as water from Well J-13 at the Nevada Test Site. Consequently, this mode of degradation might occur in the repository environment. Though few quantitative data on LC were found, a tentative ranking based on pitting corrosion, local dealloying, crevice corrosion, and biofouling is presented. CDA 102 performs well in the categories of pitting corrosion, local dealloying, and biofouling, but susceptibility to crevice corrosion diminishes its attractiveness as a candidate. The cupronickel alloy, CDA 715, probably has the best overall resistance to such localized forms of attack. 123 refs., 11 figs., 3 tabs

U.S. Army Medical Research Institute of Infectious Diseases

Science.gov (United States)

... members from biological threats. Our specialized capabilities include Biosafety Level 3 and Level 4 laboratories, world-class ... for the Department of Defense, we set the standard for identification of biological agents. Our customers in ...

Progress in the assessment of the corrosion of low and intermediate level waste containers under repository conditions

International Nuclear Information System (INIS)

Marsh, G.P.

1988-08-01

This report describes the methodology which has been developed to assess the long term corrosion of carbon steel and austenitic stainless steel containers for LLW and ILW under repository conditions. In the case of carbon steel the objective is to estimate the metal thickness required as a corrosion allowance in order to attain a container life of up to 300 years. With the stainless steel the aim is to prove their corrosion resistance over the same life-span. Results are reported which given confidence that both classes of steel may be used to produce containers which will last beyond 300 years. Furthermore the level of confidence in this prediction is expected to be increased by the corrosion data which will be obtained in the final year of the current research programme. (author)

Evaluation of dynamic compaction of low level waste burial trenches containing B-25 boxes

International Nuclear Information System (INIS)

McMullin, S.R.

1994-01-01

The Savannah River Site, owned by the US Department of Energy, is preparing to close an additional 13.8 ha of burial grounds under the Resource Conservation Recovery Act. In preparation for this closure, the dynamic compaction facility was designed and constructed to address unresolved design issues. Among these issues is the evaluation of the ability for dynamic compaction to consolidate buried low level waste containers. A model burial trench containing simulated clean wastes was dynamically compacted, after which the materials were excavated and compaction quantified. The test determined that under existing success criteria, the bottom tier of stacked B-25 boxes were not being consolidated. A quasi-structural layer was formed midway through the stacked boxes, which absorbed the compactive energy. Resulting from these observations and the data collected, a new success criterion is recommended which depends on the relative displacement per drop. The test successfully demonstrated that dynamic compaction will consolidate buried metal boxes

Corrosion considerations of high-nickel alloys and titanium alloys for high-level radioactive waste disposal containers

International Nuclear Information System (INIS)

Gdowski, G.E.; McCright, R.D.

1991-07-01

Corrosion resistant materials are being considered for the metallic barrier of the Yucca Mountain Project's high-level radioactive waste disposal containers. High nickel alloys and titanium alloys have good corrosion resistance properties and are considered good candidates for the metallic barrier. The localized corrosion phenomena, pitting and crevice corrosion, are considered as potentially limiting for the barrier lifetime. An understanding of the mechanisms of localized corrosion of how various parameters affect it will be necessary for adequate performance assessments of candidate container materials. Examples of some of the concerns involving candidate container materials. Examples of some of the concerns of involving localized corrosion are discussed. The effects of various parameters, such as temperature and concentration of halide species, on localized corrosion are given. In addition concerns about aging of the protective oxide layer in the expected service temperature range (50 to 250 degrees C) are presented. Also some mechanistic considerations of localized corrosion are given. 31 refs., 1 tab

Laboratory performance testing of an extruded bitumen containing a surrogate, sodium nitrate-based, low-level aqueous waste

International Nuclear Information System (INIS)

Mattus, A.J.; Kaczmarsky, M.M.

1986-01-01

Laboratory results of a comprehensive, regulatory performance test program, utilizing an extruded bitumen and a surrogate, sodium nitrate-based waste, have been compiled at the Oak Ridge National Laboratory (ORNL). Using a 53 millimeter, Werner and Pfleiderer extruder, operated by personnel of WasteChem Corporation of Paramus, New Jersey, laboratory-scale, molded samples of type three, air blown bitumen were prepared for laboratory performance testing. A surrogate, low-level, mixed liquid waste, formulated to represent an actual on-site waste at ORNL, containing about 30 wt % sodium nitrate, in addition to eight heavy metals, cold cesium and strontium was utilized. Samples tested contained three levels of waste loading: that is, forty, fifty and sixty wt % salt. Performance test results include the ninety day ANS 16.1 leach test, with leach indices reported for all cations and anions, in addition to the EP Toxicity test, at all levels of waste loading. Additionally, test results presented also include the unconfined compressive strength and surface morphology utilizing scanning electron microscopy. Data presented include correlations between waste form loading and test results, in addition to their relationship to regulatory performance requirements

Enzymatic activity of fungi isolated from crops

Directory of Open Access Journals (Sweden)

Wioletta A. Żukiewicz-Sobczak

2016-12-01

Full Text Available Aim: To detect and assess the activity of extracellular hydrolytic enzymes and to find differences in enzymograms between fungi isolated from wheat and rye samples and grown on Czapek-Dox Broth and Sabouraud Dextrose Broth enriched with cereal (wheat or rye. Isolated strains were also classified in the scale of biosafety levels (BSL. Material and methods: The study used 23 strains of fungi cultured from samples of wheat and rye (grain, grain dust obtained during threshing and soil collected in the Lublin region (eastern Poland. API ZYM test (bioMérieux was carried out according to the manufacturer’s instructions. Classification of BSL (Biosafety levels was based on the current literature. Results : High enzymatic activity was found in strains cultured in media containing 1% of wheat grain ( Bipolaris holmi, Penicillium decumbens and with an addition of 1% of rye grain ( Cladosporium herbarum, Aspergillus versicolor, Alternaria alternata . The total number of enzymes varied depending on the type of media, and in most cases it was higher in the culture where an addition of cereal grains was used. Conclusions : Isolated strains of fungi reveal differences in the profiles of the enzyme assay. It can be assumed that the substrate enriched in grains stimulate the higher activity of mold enzymes. Key words: enzymatic activity, mold fungi, zymogram, biohazards.

Lead iron phosphate glass as a containment medium for disposal of high-level nuclear waste

International Nuclear Information System (INIS)

Boatner, L.A.; Sales, B.C.

1989-01-01

This patent describes lead-iron phosphate glasses containing a high level of Fe 2 O 3 for use as a storage medium for high-level radioactive nuclear waste. By combining lead-iron phosphate glass with various types of simulated high-level nuclear waste, a highly corrosion resistant, homogeneous, easily processed glass can be formed. For corroding solutions at 90 0 C, with solution pH values in the range between 5 and 9, the corrosion rate of the lead-iron phosphate nuclear waste glass is at least 10 2 to 10 3 times lower than the corrosion rate of a comparable borosilicate nuclear waste glass. The presence of Fe 2 O 3 in forming the lead-iron phosphate glass is critical. The lead-iron phosphate waste glasses can be prepared with minimal modification of the technology developed for processing borosilicate glass nuclear wasteforms

Biosafety Procedure for Safe Handling of Genetically Modified Plant Materials in Bio Design Facility

International Nuclear Information System (INIS)

Zaiton Ahmad; Shuhaimi Shamsudin; Mohamed Najli Mohamed Yasin; Affrida Abu Hassan; Mohd Zaid Hassan; Rusli Ibrahim

2015-01-01

Bio Design Facility is the specifically designed glass house for propagation, screening and analysis of high quality plant varieties developed through biotechnology or a combination of nuclear technology and biotechnology. High quality plant varieties especially genetically modified plants (GMO) require a special glass house facility for propagation and screening to isolate them from cross-pollinating with wild type varieties in surrounding ecosystem, and for carrying out evaluation of possible risks of the plants to human, animal and environment before they are proven safe for field trials or commercial release. This facility which was developed under the Ninth Malaysia Plan is classified as the Plant Containment Level 2 and is compliance with the bio safety regulations and guidance for the safe release of GMO according to Malaysian Bio safety Act 2007. Bio Design Facility is fully operational since 2010 and in 2012, it has also been certified as the glass house for post-entry quarantine by The Department of Agriculture. This paper summarizes the bio safety procedure for a safe, controlled and contained growing and evaluation of GMO in Bio Design Facility. This procedure covers the physical (containment and equipment's) and operational (including responsibility, code of practice, growing, decontamination and disposal of plant materials, emergency and contingency plan) aspects of the facility. (author)

Inadvertent presence of genetically modified elements in maize food ...

African Journals Online (AJOL)

Kenya has a biosafety law and has tested genetically modified (GM) maize under confinement and containment, but has neither released nor commercialized any GM crop. This study assessed various maize food products from the Kenyan farms and markets for the inadvertent presence of GMOs. It assessed the possibility ...

Bioseguridad en instalaciones médicas de atención primaria y secundaria Biosafety in the primary and secondary health care facilities

Directory of Open Access Journals (Sweden)

María del Carmen Pérez Cueto

2007-03-01

Full Text Available Debido a la emergencia y reemergencia de agentes infecciosos en los últimos años se procesan a diario en los laboratorios clínicos y de microbiología de salud gran número de muestras de material infeccioso que pueden ser peligrosas para el personal de los laboratorios, para otros trabajadores y para la comunidad. Es por ello que resulta importante capacitar al personal en materia de bioseguridad, para que las personas expuestas conozcan los riesgos a que están sometidas, los medios de protección a usar, y qué hacer en caso de accidente. En encuesta realizada a trabajadores de laboratorios se ha detectado escasa cultura en este tema, y los accidentes registrados con más frecuencia fueron: el derrame de material infeccioso, la rotura de tubos con cultivo y los pinchazos con agujas de jeringas. Resulta de interés realizar capacitación en cascada según el nivel de los trabajadores, e incluir a los directivos de las unidades, que son los máximos responsables de la seguridad biológica en estas.Due to the emergence and reemergence of infectious agents in the last years, a great number of samples of infectious material that may be dangerous for the lab personnel, for other workers, and for the community, are processed daily in the clinical and microbiological labs. That's why, it is important to train the personnel in the biosafety topic, so that those who are exposed know the risks, the protection means they should use, and what to do if an accident occurs. In a survey done among lab workers, it was detected little culture on this topic, and the most frequent accidents were: the spilling of infectious material, the breaking of test tubes with culture, and the pricks with syringe needles. A cascade training, according the level of the workers, including the managers that are the most responsible for the biological safety, is necessary.

75 FR 23223 - Multi-Agency Informational Meeting Concerning Compliance With the Federal Select Agent Program...

Science.gov (United States)

2010-05-03

... specific regulatory guidance and information on standards concerning biosafety and biosecurity issues... discussed include entity registration, security risk assessments, biosafety requirements, and security..., biosafety requirements, and security measures are among the issues that will be discussed. All attendees...

Update on ASME rules for spent nuclear fuel and high level radioactive material and waste storage containments

International Nuclear Information System (INIS)

Ralph S. Hill III; Foster, G.M.

2005-01-01

In 2004, a new Code Case, N-717, of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (Code) was published. The Code Case provides rules for construction of containments used for storage of spent nuclear fuel and high level radioactive material and waste. The Code Case has been incorporated into Section III of the Code as Division 3, Subsection WC, Class SC Storage Containments, and will be published in the 2005 Addenda. This paper provides an informative background and insight for these rules to provide Owners, regulators, designers, and fabricators with a more comprehensive understanding of the technical basis for these rules. (authors)

76 FR 14896 - Multi-Agency Informational Meeting Concerning Compliance With the Federal Select Agent Program...

Science.gov (United States)

2011-03-18

... specific regulatory guidance and information on standards concerning biosafety and biosecurity issues... assessments, biosafety requirements, and security measures. DATES: The meeting will be held on May 10, 2011... meeting to address questions and concerns. Entity registration, security risk assessments, biosafety...

Modeling pitting corrosion damage of high-level radioactive-waste containers, with emphasis on the stochastic approach

Energy Technology Data Exchange (ETDEWEB)

Henshall, G.A.; Halsey, W.G.; Clarke, W.L.; McCright, R.D.

1993-01-01

Recent efforts to identify methods of modeling pitting corrosion damage of high-level radioactive-waste containers are described. The need to develop models that can provide information useful to higher level system performance assessment models is emphasized, and examples of how this could be accomplished are described. Work to date has focused upon physically-based phenomenological stochastic models of pit initiation and growth. These models may provide a way to distill information from mechanistic theories in a way that provides the necessary information to the less detailed performance assessment models. Monte Carlo implementations of the stochastic theory have resulted in simulations that are, at least qualitatively, consistent with a wide variety of experimental data. The effects of environment on pitting corrosion have been included in the model using a set of simple phenomenological equations relating the parameters of the stochastic model to key environmental variables. The results suggest that stochastic models might be useful for extrapolating accelerated test data and for predicting the effects of changes in the environment on pit initiation and growth. Preliminary ideas for integrating pitting models with performance assessment models are discussed. These ideas include improving the concept of container ``failure``, and the use of ``rules-of-thumb`` to take information from the detailed process models and provide it to the higher level system and subsystem models. Finally, directions for future work are described, with emphasis on additional experimental work since it is an integral part of the modeling process.

Modeling pitting corrosion damage of high-level radioactive-waste containers, with emphasis on the stochastic approach

International Nuclear Information System (INIS)

Henshall, G.A.; Halsey, W.G.; Clarke, W.L.; McCright, R.D.

1993-01-01

Recent efforts to identify methods of modeling pitting corrosion damage of high-level radioactive-waste containers are described. The need to develop models that can provide information useful to higher level system performance assessment models is emphasized, and examples of how this could be accomplished are described. Work to date has focused upon physically-based phenomenological stochastic models of pit initiation and growth. These models may provide a way to distill information from mechanistic theories in a way that provides the necessary information to the less detailed performance assessment models. Monte Carlo implementations of the stochastic theory have resulted in simulations that are, at least qualitatively, consistent with a wide variety of experimental data. The effects of environment on pitting corrosion have been included in the model using a set of simple phenomenological equations relating the parameters of the stochastic model to key environmental variables. The results suggest that stochastic models might be useful for extrapolating accelerated test data and for predicting the effects of changes in the environment on pit initiation and growth. Preliminary ideas for integrating pitting models with performance assessment models are discussed. These ideas include improving the concept of container ''failure'', and the use of ''rules-of-thumb'' to take information from the detailed process models and provide it to the higher level system and subsystem models. Finally, directions for future work are described, with emphasis on additional experimental work since it is an integral part of the modeling process

Reactor container

International Nuclear Information System (INIS)

Kato, Masami; Nishio, Masahide.

1987-01-01

Purpose: To prevent the rupture of the dry well even when the melted reactor core drops into a reactor pedestal cavity. Constitution: In a reactor container in which a dry well disposed above the reactor pedestal cavity for containing the reactor pressure vessel and a torus type suppression chamber for containing pressure suppression water are connected with each other, the pedestal cavity and the suppression chamber are disposed such that the flow level of the pedestal cavity is lower than the level of the pressure suppression water. Further, a pressure suppression water introduction pipeway for introducing the pressure suppression water into the reactor pedestal cavity is disposed by way of an ON-OFF valve. In case if the melted reactor core should fall into the pedestal cavity, the ON-OFF valve for the pressure suppression water introduction pipeway is opened to introduce the pressure suppression water in the suppression chamber into the pedestal cavity to cool the melted reactor core. (Ikeda, J.)

The use of repassivation potential in predicting the performance of high-level nuclear waste container materials

International Nuclear Information System (INIS)

Sridhar, N.; Dunn, D.; Cragnolino, G.

1995-01-01

Localized corrosion in aqueous environments forms an important bounding condition for the performance assessment of high-level waste (HLW) container materials. A predictive methodology using repassivation potential is examined in this paper. It is shown, based on long-term (continuing for over 11 months) testing of alloy 825, that repassivation potential of deep pits or crevices is a conservative and robust parameter for the prediction of localized corrosion. In contrast, initiation potentials measured by short-term tests are non-conservative and highly sensitive to several surface and environmental factors. Corrosion data from various field tests and plant equipment performance are analyzed in terms of the applicability of repassivation potential. The applicability of repassivation potential for predicting the occurrence of stress corrosion cracking (SCC) and intergranular corrosion in chloride containing environments is also examined

[Viral biosafety, biosecurity, and bioterrorism].

Science.gov (United States)

Garin, D

2010-02-01

Intentional release of infectious agents has always been considered as a possible weapon. Today this risk has expanded from use for wartime mass destruction to small-scale terrorist acts. Viruses, some of tropical origin, constitute a special biological hazard for several reasons: great infectious potential, adaptability to the host, difficulty for diagnosis in the hospital, and absence of specific treatment for the main agents involved. Handling of the dangerous biological agents requires special biocontainment laboratories equipped and classified according to increasing risk up to level 4. This article discusses the modalities of classification.

Microbial Observatory (ISS-MO): Study of BSL-2 bacterial isolates from the International Space Station

Data.gov (United States)

National Aeronautics and Space Administration — In an on-going Microbial Observatory experimental investigation on the International Space Station (ISS) multiple bacterial isolates of Biosafety Level 2 (BSL-2)...

Performance of juvenile mojarra supplied with feed containing varying levels of crude protein

Directory of Open Access Journals (Sweden)

Ricardo Henrique Bastos de Souza

2016-04-01

Full Text Available ABSTRACT The growth of the Brazilian aquaculture has stimulated the development of the productive chain of native species, including marine environment. The objective of this study was to evaluate the growth performance of juvenile mojarra fish (Diapterus rhombeus fed diets containing different concentrations of crude protein (32, 36, 40 and 44 g 100 g-1. The 80 juvenile mojarra (7.2±1.5 g were kept in 16 circular tanks (150 L. The study design used was completely randomized with four treatments and four repetitions. The fish were fed four times a day. At the end of the experiment (60 days the final weight, feed intake, weight gain (WG, feed:gain ratio (FGR, protein efficiency rate (PER, energy efficiency rate, specific growth, survival rate and, body composition were evaluated. It was verified significant effect of protein level on the WG, with the best value at the level of 38.20 g 100 g-1 of crude protein. For FGR, the best estimated value occurred with 38.06 g 100 g-1 of crude protein, similar to that reported for the PER (38.91 g 100 g-1. The other performance parameters and body composition were not influenced by crude protein levels. Diet crude protein concentrations between 38.06 and 38.91 g 100 g-1 provide the best performance indices for juvenile mojarra.

Assessment of the Biodegradability of Containers for Low and Intermediate Level Nuclear Waste

International Nuclear Information System (INIS)

Zlobenko, B.P.

2013-01-01

Concrete and reinforced concrete are widely used as engineered barriers (containers) for radioactive waste disposal facilities due to their isolating ability, mechanical stability and low cost. Several types of protective reinforced concrete containers for low and intermediate level waste have been designed in Ukraine. Evaluation of these containers for microbial stability is required according to NRC of Ukraine Regulation No.306.608-96. The research was therefore aimed at studying the degradation of the cement material due to microbiological interaction and the possibility of biodegraded cement as an ideal environment for the growth of other microorganisms under waste disposal conditions to satisfy the regulatory requirements. Results from this study indicated that Aspergillus niger induced gluconic and oxalic acids that dissolve portlandite (with a low leaching of calcium) after one year of contact time. This resulted in an increase in porosity, loss in tensile strength biomechanically deteriorated and cracking. XRD analysis identified crystalline precipitates within the biomass on the concrete surface as calcium oxalate dehydrate (weddellite) and calcium oxalate monohydrate (whewellite). The mechanism regarding of the microbiological interaction on the concrete surface can be summarized as follows: Phase 1: Fungi accumulate on the surface of the concrete, thereby degrading the concrete surface by biochemical and biomechanical interactions. When this effect is in the presence of air with available carbon dioxide, the micro fungi reduces the pH of the concrete from >13 to 8.5. During this phase no accumulation were observed in sections where granite aggregates are present. Phase 2: After reducing the pH of the concrete paste during phase 1, and provided that sufficient nutrients, moisture and oxygen are present sulphur oxidizing bacteria start to accumulate on the concrete surface. The result form this study therefore concluded that fungal biogeochemical activity

Testicular histology and blood testosterone levels of male rabbit after given concentrated diets containing calliandra leaf meal and pineapple peels

Science.gov (United States)

Setyawati, I.; Ermayanti, N. G. A. M.; Suarni, N. M. R.; Narayani, I.; Suaskara, I. B. M.

2018-03-01

Calliandra calothyrsus Meissn is one of a highly protein source of forage, however, it is not widely used for non ruminant feed because it contains antinutritional substances in the form of condensed tannin. Tannin can bind proteins, this tannin-protein complexes are difficult to be digested in the gastrointestinal tract, then will be defecated outside the body. To optimize the utilization of calliandra in the diet, pineapple peels were added as a source of protease (bromelain). Beside of waste utilization, it is expected that bromelain can degrade the tannin-protein complexes thereby reducing the negative effects of tannins. This research is a feeding experiment on male rabbit (Lepus sp), five weeks old. The diet formulation is prepared according to the standardized diet of the local rabbit. This experiment used a Completely Randomized Design (CRD) with four treatments i.e. control group which were only given commercial feed (R0), commercial feed contained 15% of Calliandra leaf meal and 30% of pineapple peel (R1), commercial feed contained 30% of Calliandra leaf meal and 30% of pineapple peel (R2), and commercial feed contained 45% of Calliandra and 30% of pineapple peel (R3). The treatment was done for three months. The results of this study on the reproduction of male rabbits showed that the increase of calliandra leaf meal level in a diet containing 30% of pineapple peels affected the testicular histology, and also decreased the diameter of seminiferous tubule and blood testosterone levels of male rabbits.

Multiphoton tomography of intratissue tattoo nanoparticles

Science.gov (United States)

König, Karsten

2012-02-01

Most of today's intratissue tattoo pigments are unknown nanoparticles. So far, there was no real control of their use due to the absence of regulations. Some of the tattoo pigments contain carcinogenic amines e.g. azo pigment Red 22. Nowadays, the European Union starts to control the administration of tattoo pigments. There is an interest to obtain information on the intratissue distribution, their interaction with living cells and the extracellular matrix, and the mechanisms behind laser tattoo removal. Multiphoton tomographs are novel biosafety and imaging tools that can provide such information non-invasively and without further labeling. When using the spectral FLIM module, spatially-resolved emission spectra, excitation spectra, and fluorescence lifetimes can pr provided. Multiphoton tomographs are used by all major cosmetic comapanies to test the biosafety of sunscreen nanoparticles.

Short-term effect of chewing gums containing probiotic Lactobacillus reuteri on the levels of inflammatory mediators in gingival crevicular fluid

DEFF Research Database (Denmark)

Twetman, Svante; Derawi, Bilal; Keller, Mette

2009-01-01

OBJECTIVE: To investigate the effect of a chewing gum containing probiotic bacteria on gingival inflammation and the levels of selected inflammatory mediators in gingival crevicular fluid (GCF). MATERIAL AND METHODS: Forty-two healthy adults with moderate levels of gingival inflammation entered...... a double-blind placebo-controlled study design. The subjects were randomly assigned to one of three parallel arms: Group A/P was given one active and one placebo gum daily, Group A/A received two active chewing gums, and Group P/P two placebo gums. The chewing gums contained two strains of Lactobacillus...... reuteri: ATCC 55730 and ATCC PTA 5289 (1 x 10(8) CFU/gum, respectively). The subjects were instructed to chew the gums for 10 min over the course of 2 weeks. Bleeding on probing (BOP) and GCF sampling were conducted at baseline and after 1, 2 and 4 weeks. The levels of IL-1beta, TNF-alpha, IL-6, IL-8...

Irradiation induced defects containing oxygen atoms in germanium crystal as studied by deep level transient spectroscopy

International Nuclear Information System (INIS)

Fukuoka, Noboru; Kambe, Yoshiyuki; Saito, Haruo; Matsuda, Koji.

1984-05-01

Deep level transient spectroscopy was applied to the electron trapping levels which are associated with the irradiation induced lattice defects in germanium crystals. The germanium crystals used in the study were doped with oxygen, antimony or arsenic and the defects were formed by electron irradiation of 1.5MeV or 10MeV. The nature of so called ''thermal defect'' formed by heat treatment at about 670K was also studied. The trapping levels at Esub(c)-0.13eV, Esub(c)-0.25eV and Esub(c)-0.29eV were found to be associated with defects containing oxygen atoms. From the experimental results the Esub(c)-0.25eV level was attributed to the germanium A-center (interstitial oxygen atom-vacancy pair). Another defect associated with the 715cm -1 infrared absorption band was found to have a trapping level at the same position at Esub(c)-0.25eV. The Esub(c)-0.23eV and Esub(c)-0.1eV levels were revealed to be associated with thermal donors formed by heat treatment at about 670K. Additional two peaks (levels) were observed in the DLTS spectrum. The annealing behavior of the levels suggests that the thermal donors originate from not a single type but several types of defects. (author)

Studies of Corrosion Resistant Materials Being Considered for High-Level Nuclear Waste Containment in Yucca Mountain Relevant Environments

International Nuclear Information System (INIS)

McCright, R.D.; Ilevbare, G.; Estill, J.; Rebak, R.

2001-01-01

Containment of spent nuclear fuel and vitrified forms of high level nuclear waste require use of materials that are highly corrosion resistant to all of the anticipated environmental scenarios that can occur in a geological repository. Ni-Cr-Mo Alloy 22 (UNS N60622) is proposed for the corrosion resistant outer barrier of a two-layer waste package container at the potential repository site at Yucca Mountain. A range of water compositions that may contact the outer barrier is under consideration, and a testing program is underway to characterize the forms of corrosion and to quantify the corrosion rates. Results from the testing support models for long term prediction of the performance of the container. Results obtained to date indicate a very low general corrosion rate for Alloy 22 and very high resistance to all forms of localized and environmentally assisted cracking in environments tested to date

Physical and chemical characterization of borosilicate glasses containing Hanford high-level wastes

International Nuclear Information System (INIS)

Kupfer, M.J.; Palmer, R.A.

1980-10-01

Scouting studies are being performed to develop and evaluate silicate glass forms for immobilization of Hanford high-level wastes. Detailed knowledge of the physical and chemical properties of these glasses is required to assess their suitability for long-term storage or disposal. Some key properties to be considered in selecting a glass waste form include leach resistance, resistance to radiation, microstructure (includes devitrification behavior or crystallinity), homogeneity, viscosity, electrical resistivity, mechanical ruggedness, thermal expansion, thermal conductivity, density, softening point, annealing point, strain point, glass transformation temperature, and refractive index. Other properties that are important during processing of the glass include volatilization of glass and waste components, and corrosivity of the glass on melter components. Experimental procedures used to characterize silicate waste glass forms and typical properties of selected glass compositions containing simulated Hanford sludge and residual liquid wastes are presented. A discussion of the significance and use of each measured property is also presented

A biossegurança ocupacional na perspectiva do estudante de enfermagem | Occupational biosafety from the perspective of nursing students

Directory of Open Access Journals (Sweden)

Rosane Teresinha Fontana

2017-05-01

Full Text Available Trata-se de uma pesquisa descritiva que teve como objetivo investigar as não conformidades quanto à biossegurança cometidas pelos profissionais de saúde durante o cuidado, sob a perspectiva do estudante de enfermagem. A coleta de dados foi feita por meio de um questionário autoaplicável junto a 80 estudantes, que foram analisados mediante análise temática. O estudo respeitou os preceitos éticos envolvidos com a pesquisa em seres humanos. A não conformidade prevalente refere-se à negligência quanto ao uso de Equipamentos de Proteção Individual pelos trabalhadores, justificada pela falta de tempo, sobrecarga e desconhecimento do trabalhador. Para melhorar este cenário, os acadêmicos sugeriram educação permanente em saúde. Pode-se inferir que a educação pode ser uma estratégia para a cultura de segurança do usuário e do trabalhador. =================================== This is a descriptive research that aimed to investigate the non-conformities regarding biosafety, committed by health professionals during service delivery, from the perspective of nursing students. Data collection was done through a self-administered questionnaire with 80 students-, and were analyzed through thematic analysis. The study respected the ethical precepts related to human research. The prevalent non-compliance refers to workers’ negligence to use Individual Protection Equipment by, justified by their lack of time, overload and lack of knowledge. Academics suggested permanent health education as a way of improving this scenario. It can be inferred that education can be a strategy for the safety culture of both the user and the worker.

A special issue on reviews in biomedical applications of nanomaterials, tissue engineering, stem cells, bioimaging, and toxicity.

Science.gov (United States)

Nalwa, Hari Singh

2014-10-01

This second special issue of the Journal of Biomedical Nanotechnology in a series contains another 30 state-of-the-art reviews focused on the biomedical applications of nanomaterials, biosensors, bone tissue engineering, MRI and bioimaging, single-cell detection, stem cells, endothelial progenitor cells, toxicity and biosafety of nanodrugs, nanoparticle-based new therapeutic approaches for cancer, hepatic and cardiovascular disease.

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Farmer, J.C.; Van Konynenburg, R.A.; McCright, R.D.; Gdowski, G.E.

1988-05-01

Three copper-based alloys --- CDA 102 (OFHC copper), CDA 613 (aluminum bronze), and CDA 715 (Cu-30Ni) --- are being considered as possible materials for the fabrication of high-level radioactive-waste disposal containers. Waste will include fuel assemblies from reactors as well as borosilicate glass forms, and will be sent to the prospective repository at Yucca Mountain, Nevada, for emplacement. The three copper-based alloys discussed here are being considered in addition to the iron- to nickel-based austenitic materials discussed in Volume 3. The decay of radionuclides will result in substantial heat generation and in fluxes of gamma radiation. In this environment, container materials may degrade by atmospheric oxidation, uniform aqueous phase corrosion, pitting, crevice corrosion, transgranular stress corrosion cracking (TGSCC) in tarnishing environments, or intergranular stress corrosion cracking (IGSCC) in nontarnishing environments. This report is a critical survey of available data on the stress corrosion cracking (SCC) of the three copper-based alloys. The requisite conditions for TGSCC and IGSCC include combinations of stress, oxygen, ammonia or nitrite, and water. Note that nitrite is generated by gamma radiolysis of moisture films in air but that ammonia is not. TGSCC has been observed in CDA 102 and CDA 613 exposed to moist ammonia-containing environments whereas SCC has not been documented for CDA 715 under similar conditions. SCC is also promoted in copper by nitrite ions. Furthermore, phosphorus-deoxidized copper is unusually susceptible to embrittlement in such environments. The presence of tin in CDA 613 prevents IGSCC. It is believed that tin segregates to grain boundaries, where it oxidizes very slowly, thereby inhibiting the oxidation of aluminum. 117 refs., 27 figs., 9 tabs

Biochemical process of low level radioactive liquid simulation waste containing detergent

International Nuclear Information System (INIS)

Kundari, Noor Anis; Putra, Sugili; Mukaromah, Umi

2015-01-01

Research of biochemical process of low level radioactive liquid waste containing detergent has been done. Thse organic liquid wastes are generated in nuclear facilities such as from laundry. The wastes that are cotegorized as hazard and poison materials are also radioactive. It must be treated properly by detoxification of the hazard and decontamination of the radionuclides to ensure that the disposal of the waste meets the requirement of standard quality of water. This research was intended to determine decontamination factor and separation efficiensies, its kinetics law, and to produce a supernatant that ensured the environmental quality standard. The radioactive element in the waste was thorium with activity of 5.10 −5 Ci/m 3 . The radioactive liquid waste which were generated in simulation plant contains detergents that was further processed by aerobic biochemical process using SGB 103 bacteria in a batch reactor equipped with aerators. Two different concentration of samples were processed and analyzed for 212 hours and 183 hours respectively at a room temperature. The product of this process is a liquid phase called as supernatant and solid phase material called sludge. The chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solid (SS), and its alpha activity were analyzed. The results show that the decontamination factor and the separation efficiency of the lower concentration samples are higher compared to the samples with high concentration. Regarding the decontamination factor, the result for 212 hours processing of waste with detergent concentration of 1.496 g/L was 3.496 times, whereas at the detergent concentration of 0.748 g/L was 15.305 times for 183 hours processing. In case of the separation efficiency, the results for both samples were 71.396% and 93.465% respectively. The Bacterial growth kinetics equation follow Monod’s model and the decreasing of COD and BOD were first order with the rate constant of 0.01 hour −1

Biochemical process of low level radioactive liquid simulation waste containing detergent

Energy Technology Data Exchange (ETDEWEB)

Kundari, Noor Anis, E-mail: nooranis@batan.go.id; Putra, Sugili; Mukaromah, Umi [Sekolah Tinggi Teknologi Nuklir – Badan Tenaga Nuklir Nasional Jl. Babarsari P.O. BOX 6101 YKBB Yogyakarta 55281 Telp : (0274) 48085, 489716, Fax : (0274) 489715 (Indonesia)

2015-12-29

Research of biochemical process of low level radioactive liquid waste containing detergent has been done. Thse organic liquid wastes are generated in nuclear facilities such as from laundry. The wastes that are cotegorized as hazard and poison materials are also radioactive. It must be treated properly by detoxification of the hazard and decontamination of the radionuclides to ensure that the disposal of the waste meets the requirement of standard quality of water. This research was intended to determine decontamination factor and separation efficiensies, its kinetics law, and to produce a supernatant that ensured the environmental quality standard. The radioactive element in the waste was thorium with activity of 5.10{sup −5} Ci/m{sup 3}. The radioactive liquid waste which were generated in simulation plant contains detergents that was further processed by aerobic biochemical process using SGB 103 bacteria in a batch reactor equipped with aerators. Two different concentration of samples were processed and analyzed for 212 hours and 183 hours respectively at a room temperature. The product of this process is a liquid phase called as supernatant and solid phase material called sludge. The chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solid (SS), and its alpha activity were analyzed. The results show that the decontamination factor and the separation efficiency of the lower concentration samples are higher compared to the samples with high concentration. Regarding the decontamination factor, the result for 212 hours processing of waste with detergent concentration of 1.496 g/L was 3.496 times, whereas at the detergent concentration of 0.748 g/L was 15.305 times for 183 hours processing. In case of the separation efficiency, the results for both samples were 71.396% and 93.465% respectively. The Bacterial growth kinetics equation follow Monod’s model and the decreasing of COD and BOD were first order with the rate constant of 0

Biochemical process of low level radioactive liquid simulation waste containing detergent

Science.gov (United States)

Kundari, Noor Anis; Putra, Sugili; Mukaromah, Umi

2015-12-01

Research of biochemical process of low level radioactive liquid waste containing detergent has been done. Thse organic liquid wastes are generated in nuclear facilities such as from laundry. The wastes that are cotegorized as hazard and poison materials are also radioactive. It must be treated properly by detoxification of the hazard and decontamination of the radionuclides to ensure that the disposal of the waste meets the requirement of standard quality of water. This research was intended to determine decontamination factor and separation efficiensies, its kinetics law, and to produce a supernatant that ensured the environmental quality standard. The radioactive element in the waste was thorium with activity of 5.10-5 Ci/m3. The radioactive liquid waste which were generated in simulation plant contains detergents that was further processed by aerobic biochemical process using SGB 103 bacteria in a batch reactor equipped with aerators. Two different concentration of samples were processed and analyzed for 212 hours and 183 hours respectively at a room temperature. The product of this process is a liquid phase called as supernatant and solid phase material called sludge. The chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solid (SS), and its alpha activity were analyzed. The results show that the decontamination factor and the separation efficiency of the lower concentration samples are higher compared to the samples with high concentration. Regarding the decontamination factor, the result for 212 hours processing of waste with detergent concentration of 1.496 g/L was 3.496 times, whereas at the detergent concentration of 0.748 g/L was 15.305 times for 183 hours processing. In case of the separation efficiency, the results for both samples were 71.396% and 93.465% respectively. The Bacterial growth kinetics equation follow Monod's model and the decreasing of COD and BOD were first order with the rate constant of 0.01 hour-1.

Evolution of the Lunar Receiving Laboratory to the Astromaterial Sample Curation Facility: Technical Tensions Between Containment and Cleanliness, Between Particulate and Organic Cleanliness

Science.gov (United States)

Allton, J. H.; Zeigler, R. A.; Calaway, M. J.

2016-01-01

The Lunar Receiving Laboratory (LRL) was planned and constructed in the 1960s to support the Apollo program in the context of landing on the Moon and safely returning humans. The enduring science return from that effort is a result of careful curation of planetary materials. Technical decisions for the first facility included sample handling environment (vacuum vs inert gas), and instruments for making basic sample assessment, but the most difficult decision, and most visible, was stringent biosafety vs ultra-clean sample handling. Biosafety required handling of samples in negative pressure gloveboxes and rooms for containment and use of sterilizing protocols and animal/plant models for hazard assessment. Ultra-clean sample handling worked best in positive pressure nitrogen environment gloveboxes in positive pressure rooms, using cleanable tools of tightly controlled composition. The requirements for these two objectives were so different, that the solution was to design and build a new facility for specific purpose of preserving the scientific integrity of the samples. The resulting Lunar Curatorial Facility was designed and constructed, from 1972-1979, with advice and oversight by a very active committee comprised of lunar sample scientists. The high precision analyses required for planetary science are enabled by stringent contamination control of trace elements in the materials and protocols of construction (e.g., trace element screening for paint and flooring materials) and the equipment used in sample handling and storage. As other astromaterials, especially small particles and atoms, were added to the collections curated, the technical tension between particulate cleanliness and organic cleanliness was addressed in more detail. Techniques for minimizing particulate contamination in sample handling environments use high efficiency air filtering techniques typically requiring organic sealants which offgas. Protocols for reducing adventitious carbon on sample

Fire Blight Control: The Struggle Goes On. A Comparison of Different Fire Blight Control Methods in Switzerland with Respect to Biosafety, Efficacy and Durability.

Science.gov (United States)

Gusberti, Michele; Klemm, Urs; Meier, Matthias S; Maurhofer, Monika; Hunger-Glaser, Isabel

2015-09-11

Fire blight (FB), caused by Erwinia amylovora, is one of the most important pome fruit pathogens worldwide. To control this devastating disease, various chemical and biological treatments are commonly applied in Switzerland, but they fail to keep the infection at an acceptable level in years of heavy disease pressure. The Swiss authorities therefore currently allow the controlled use of the antibiotic streptomycin against FB in years that are predicted to have heavy infection periods, but only one treatment per season is permitted. Another strategy for controlling Erwinia is to breed resistant/tolerant apple cultivars. One way of accelerating the breeding process is to obtain resistant cultivars by inserting one or several major resistance genes, using genetic engineering. To date, no study summarizing the impact of different FB control measures on the environment and on human health has been performed. This study consequently aims to compare different disease-control measures (biological control, chemical control, control by antibiotics and by resistant/tolerant apple cultivars obtained through conventional or molecular breeding) applied against E. amylovora, considering different protection goals (protection of human health, environment, agricultural diversity and economic interest), with special emphasis on biosafety aspects. Information on each FB control measure in relation to the specified protection goal was assessed by literature searches and by interviews with experts. Based on our results it can be concluded that the FB control measures currently applied in Switzerland are safe for consumers, workers and the environment. However, there are several gaps in our knowledge of the human health and environmental impacts analyzed: data are missing (1) on long term studies on the efficacy of most of the analyzed FB control measures; (2) on the safety of operators handling streptomycin; (3) on residue analyses of Equisetum plant extract, the copper and aluminum

Fire Blight Control: The Struggle Goes On. A Comparison of Different Fire Blight Control Methods in Switzerland with Respect to Biosafety, Efficacy and Durability

Directory of Open Access Journals (Sweden)

Michele Gusberti

2015-09-01

Full Text Available Fire blight (FB, caused by Erwinia amylovora, is one of the most important pome fruit pathogens worldwide. To control this devastating disease, various chemical and biological treatments are commonly applied in Switzerland, but they fail to keep the infection at an acceptable level in years of heavy disease pressure. The Swiss authorities therefore currently allow the controlled use of the antibiotic streptomycin against FB in years that are predicted to have heavy infection periods, but only one treatment per season is permitted. Another strategy for controlling Erwinia is to breed resistant/tolerant apple cultivars. One way of accelerating the breeding process is to obtain resistant cultivars by inserting one or several major resistance genes, using genetic engineering. To date, no study summarizing the impact of different FB control measures on the environment and on human health has been performed. This study consequently aims to compare different disease-control measures (biological control, chemical control, control by antibiotics and by resistant/tolerant apple cultivars obtained through conventional or molecular breeding applied against E. amylovora, considering different protection goals (protection of human health, environment, agricultural diversity and economic interest, with special emphasis on biosafety aspects. Information on each FB control measure in relation to the specified protection goal was assessed by literature searches and by interviews with experts. Based on our results it can be concluded that the FB control measures currently applied in Switzerland are safe for consumers, workers and the environment. However, there are several gaps in our knowledge of the human health and environmental impacts analyzed: data are missing (1 on long term studies on the efficacy of most of the analyzed FB control measures; (2 on the safety of operators handling streptomycin; (3 on residue analyses of Equisetum plant extract, the copper

Evaluation of LLNL BSL-3 Maximum Credible Event Potential Consequence to the General Population and Surrounding Environment

Energy Technology Data Exchange (ETDEWEB)

Johnson, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2010-08-16

The purpose of this evaluation is to establish reproducibility of the analysis and consequence results to the general population and surrounding environment in the LLNL Biosafety Level 3 Facility Environmental Assessment (LLNL 2008).

78 FR 9828 - Establishment of User Fees for Filovirus Testing of Nonhuman Primate Liver Samples

Science.gov (United States)

2013-02-12

... specifically for a ``filovirus testing facility'' because laboratories, especially the Biosafety Level 4 (BSL-4... a price that may be below standard commercial market fees, or free. The fee HHS/CDC intends to...

Bioavailability of cyanide after consumption of a single meal of foods containing high levels of cyanogenic glycosides: a crossover study in humans.

Science.gov (United States)

Abraham, Klaus; Buhrke, Thorsten; Lampen, Alfonso

2016-03-01

The acute toxicity of cyanide is determined by its peak levels reached in the body. Compared to the ingestion of free cyanide, lower peak levels may be expected after consumption of foods containing cyanogenic glycosides with the same equivalent dose of cyanide. This is due to possible delayed and/or incomplete release of cyanide from the cyanogenic glycosides depending on many factors. Data on bioavailability of cyanide after consumption of foods containing high levels of cyanogenic glycosides as presented herein were necessary to allow a meaningful risk assessment for these foods. A crossover study was carried out in 12 healthy adults who consumed persipan paste (equivalent total cyanide: 68 mg/kg), linseed (220 mg/kg), bitter apricot kernels (about 3250 mg/kg), and fresh cassava roots (76-150 mg/kg), with each "meal" containing equivalents of 6.8 mg cyanide. Cyanide levels were determined in whole blood using a GC-MS method with K(13)C(15)N as internal standard. Mean levels of cyanide at the different time points were highest after consumption of cassava (15.4 µM, after 37.5 min) and bitter apricot kernels (14.3 µM, after 20 min), followed by linseed (5.7 µM, after 40 min) and 100 g persipan (1.3 µM, after 105 min). The double dose of 13.6 mg cyanide eaten with 200 g persipan paste resulted in a mean peak level of 2.9 µM (after 150 min). An acute reference dose of 0.075 mg/kg body weight was derived being valid for a single application/meal of cyanides or hydrocyanic acid as well as of unprocessed foods with cyanogenic glycosides also containing the accompanying intact β-glucosidase. For some of these foods, this approach may be overly conservative due to delayed release of cyanide, as demonstrated for linseed. In case of missing or inactivated β-glucosidase, the hazard potential is much lower.

Carryover of maduramicin from feed containing cross-contamination levels into eggs of laying hens.

Science.gov (United States)

Bodi, Dorina; Fry, Hildburg; Schafft, Helmut; Lahrssen-Wiederholt, Monika; Preiss-Weigert, Angelika

2012-07-18

Maduramicin is a coccidiostat authorized as feed additive in the European Union for chickens and turkeys for fattening but not for laying hens, considering the risk of residues in eggs. The unavoidable cross-contamination of non-target feed with coccidiostats is regulated by Commission Directive 2009/8/EC and resulting carry-over in food by Commission Regulation (EC) No. 124/2009. To verify the compliance of the maximum levels for maduramicin in feed (50 μg/kg) and eggs (2 μg/kg), the carry-over from feed into eggs was investigated. Diets containing 10, 30, and 50 μg of maduramicin/kg of feed were fed to laying hens. Feed, egg white, and yolk were analyzed by LC-MS/MS. Maduramicin residues were only detected in in egg yolk. Feeding the 10 μg/kg maduramicin diet resulted in maduramicin concentrations up to 2.5 μg/kg in whole eggs, already exceeding the maximum level. A carry-over rate of 8% maduramicin from feed into eggs was calculated.

Resource Conservation and Recovery Act closure plan for the Intermediate-Level Transuranic Storage Facility mixed waste container storage units

International Nuclear Information System (INIS)

Nolte, E.P.; Spry, M.J.; Stanisich, S.N.

1992-11-01

This document describes the proposed plan for clean closure of the Intermediate-Level Transuranic Storage Facility mixed waste container storage units at the Idaho National Engineering Laboratory in accordance with the Resource Conservation and Recovery Act closure requirements. Descriptions of the location, size, capacity, history, and current status of the units are included. The units will be closed by removing waste containers in storage, and decontamination structures and equipment that may have contacted waste. Sufficient sampling and documentation of all activities will be performed to demonstrate clean closure. A tentative schedule is provided in the form of a milestone chart

Development of a composite polyethylene--fiberglass-reinforced-plastic high-integrity container for disposal of low-level radioactive waste

International Nuclear Information System (INIS)

Lowenberg, H.; Shaw, M.D.

1989-01-01

This paper reports on a program to develop a high-integrity container (HIC) for handling, transportation, and disposal of low-level radioactive wastes. The HIC, made of a composite material, consists of an inner layer of polyethylene bonded to an outer casing of fiberglass-reinforced plastic. Preliminary handmade prototype units containing about 0.22 m 3 , called HIC-7, have been fabricated and exposed to some of the U.S. Nuclear Regulatory Commission (NRC) and state tests. The HICs withstood over twice the external pressure from maximum burial conditions and twice the Type A package internal pressure requirements. In addition, freedrops on compacted soil and an unyielding surface showed no deleterious effects

Treatment of low level radioactive liquid waste containing appreciable concentration of TBP degraded products.

Science.gov (United States)

Valsala, T P; Sonavane, M S; Kore, S G; Sonar, N L; De, Vaishali; Raghavendra, Y; Chattopadyaya, S; Dani, U; Kulkarni, Y; Changrani, R D

2011-11-30

The acidic and alkaline low level radioactive liquid waste (LLW) generated during the concentration of high level radioactive liquid waste (HLW) prior to vitrification and ion exchange treatment of intermediate level radioactive liquid waste (ILW), respectively are decontaminated by chemical co-precipitation before discharge to the environment. LLW stream generated from the ion exchange treatment of ILW contained high concentrations of carbonates, tributyl phosphate (TBP) degraded products and problematic radio nuclides like (106)Ru and (99)Tc. Presence of TBP degraded products was interfering with the co-precipitation process. In view of this a modified chemical treatment scheme was formulated for the treatment of this waste stream. By mixing the acidic LLW and alkaline LLW, the carbonates in the alkaline LLW were destroyed and the TBP degraded products got separated as a layer at the top of the vessel. By making use of the modified co-precipitation process the effluent stream (1-2 μCi/L) became dischargeable to the environment after appropriate dilution. Based on the lab scale studies about 250 m(3) of LLW was treated in the plant. The higher activity of the TBP degraded products separated was due to short lived (90)Y isotope. The cement waste product prepared using the TBP degraded product was having good chemical durability and compressive strength. Copyright © 2011 Elsevier B.V. All rights reserved.

Effect of dietary calcium level and source on mineral utilisation by piglets fed diets containing exogenous phytase.

Science.gov (United States)

Schlegel, P; Gutzwiller, A

2017-10-01

Calcium and phosphorus are essential minerals, closely linked in digestive processes and metabolism. With widespread use of low P diets containing exogenous phytase, the optimal dietary Ca level was verified. The 40-day study evaluated the effects of Ca level (4, 7 and 10 g/kg diet) and Ca source (Ca from CaCO 3 and from Lithothamnium calcareum) on mineral utilisation in 72 piglets (7.9 ± 1.0 kg BW) fed an exogenous phytase containing diet with 2.9 g digestible P/kg. Measured parameters were growth performance, stomach mineral solubility, bone breaking strength and urinary, serum and bone mineral concentration. The apparent total tract digestibility of minerals was also assessed in the two diets with 7 g Ca/kg, using 12 additional pigs. Regardless of Ca source, increasing dietary Ca impaired feed conversion ratio, increased urinary pH, increased serum and urinary Ca, decreased serum and urinary P, decreased serum Mg and increased urinary Mg, increased serum AP activity, decreased bone Mg increased bone Zn. Bone breaking strength was improved with 7 compared to 4 g Ca/kg. Compared to CaCO 3 , Ca from Lithothamnium calcareum increased serum Mg and with, 10 g Ca/kg, it limited body weight gain. The dose response of Ca in a diet with 2.9 g digestible P/kg and including exogenous phytase indicated that: (i) a low dietary Ca was beneficial for piglet growth, but was limiting the metabolic use of P; (ii) a high dietary Ca level impaired P utilisation; (iii) the optimal P utilisation and bone breaking strength was obtained with a dietary Ca-to-digestible P ratio of 2.1 to 2.4:1; (iv). Increasing dietary Ca reduced Mg utilisation, but not Zn status, when fed at adequate level. Finally, Ca from Lithothamnium calcareum had similar effects on Ca and P metabolism as CaCO 3 , but impaired growth when fed at the highest inclusion level. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

Physicochemical evaluation of sheep milk yogurts containing different levels of inulin.

Science.gov (United States)

Balthazar, C F; Conte Júnior, C A; Moraes, J; Costa, M P; Raices, R S L; Franco, R M; Cruz, A G; Silva, A C O

2016-06-01

The present study aimed to evaluate the physicochemical parameters of sheep milk yogurt smoothies (SMY) containing inulin at different levels (0, 2, 4, and 6%). Titratable acidity and pH, yogurt bacteria counts, fatty acids profile, and healthy lipid indices were evaluated during 28 d of refrigerated storage. As expected for yogurts, Streptococcus thermophilus counts decreased 1 to 3 log cycles and Lactobacillus delbrueckii ssp. bulgaricus counts decreased 1 to 2 cycles from d 1 to 28. The protective effect of inulin on bacteria survival and viability in the food matrix was not verified in the prebiotic SMY during storage, regardless of inulin level. Although lower post-acidification was observed in prebiotic SMY due to inulin addition, no changes were verified in short-chain fatty acids (SCFA) or polyunsaturated fatty acids (PUFA). In contrast, an increase in medium- and long-chain fatty acids (MCFA and LCFA) and monounsaturated fatty acids (MUFA) was observed during storage in all SMY. The most significant levels of fatty acids in SMY were oleic acid, followed by palmitic and myristic acids. A high positive correlation between conjugated linoleic acid (CLA) and oleic acid (r=0.978) was observed. The cis-9,trans-11 CLA isomer represented approximately 78% of total PUFA and 2% of total fatty acids, whereas α-linoleic acid comprised about 22% PUFA and 1% of total fatty acids in SMY. The fatty acid changes during storage were associated with the metabolic activity of the starter bacteria, especially for oleic acid and cis-9,trans-11 CLA isomer. Thus, the SMY represented a great source of these compounds. We observed that inulin levels did not affect fatty acids. A nonsignificant decrease in atherogenic index was observed during storage in all SMY, and a positive correlation (r=0.973) was found between atherogenic index and thrombogenic index of SMY. High correlations were observed between lauric and myristic acids and saturated fatty acids (r=0.907 and r=0

Effect of pipe rupture loads inside containment in the break exclusionary piping outside containment

International Nuclear Information System (INIS)

Weiss, G.

1987-01-01

The plant design for protection against piping failures outside containment should make sure that fluid system piping in containment penetration areas are designed to meet the break exclusionary provisions contained in the BTP MEB 3-1. According to these provisions, following a piping failure (main steam line) inside containment, the part of the flued head connected to the piping outside containment, should not exceed the ASME Code stress limits for the appropriate load combinations. A finite element analysis has been performed to evaluate the stress level in this area. (orig./HP)

Development of integrated mechanistically-based degradation-mode models for performance assessment of high-level waste containers

International Nuclear Information System (INIS)

Farmer, J. C.

1998-01-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological repository at Yucca Mountain, Nevada is a two-tayer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 825, 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as A516 Gr 55 or Monel 400. At the present time, Alloy C- 22 and A516 Gr 55 are favored

Development of integraded mechanistically-based degradation-mode models for performance assessment of high-level waste containers

Energy Technology Data Exchange (ETDEWEB)

Farmer, J. C., LLNL

1998-06-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological repository at Yucca Mountain, Nevada is a two-tayer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 825, 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as A516 Gr 55 or Monel 400. At the present time, Alloy C- 22 and A516 Gr 55 are favored.

Crevice corrosion ampersand pitting of high-level waste containers: integration of deterministic ampersand probabilistic models

International Nuclear Information System (INIS)

Farmer, J.C.; McCright, R.D.

1997-01-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological repository at Yucca Mountain, Nevada is a two-layer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as carbon steel or Monel 400. An integrated predictive model is being developed to account for the effects of localized environmental conditions in the CRM-CAM crevice on the initiation and propagation of pits through the CRM

CREVICE CORROSION and PITTING OF HIGH-LEVEL WASTE CONTAINERS: INTEGRATION OF DETERMINISTIC and PROBABILISTIC MODELS

International Nuclear Information System (INIS)

JOSEPH C. FARMER AND R. DANIEL MCCRIGHT

1997-01-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological repository at Yucca Mountain, Nevada is a two-layer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as carbon steel or Monel 400. An integrated predictive model is being developed to account for the effects of localized environmental conditions in the CRM-CAM crevice on the initiation and propagation of pits through the CRM

The development of technologies for the long-term containment of low-level radioactive and hazardous wastes into geologic formations

International Nuclear Information System (INIS)

Lomenick, T.F.

1990-01-01

In the humid eastern half of the country, the disposal of low-level radioactive wastes has evolved from the use of shallow, sanitary landfill type, excavations to current plans for the complete containment of long half-life radionuclides in large-diameter boreholes and other excavations in the deeper subsurface. In general, the aim of current procedures and regulations is to prevent the migration of contaminants into groundwaters. For the short half-life materials, burials may be accommodated in lined and capped trenches along with ''tumulus'' or concrete encased structures that would ensure containment for a few tens of years to perhaps several hundreds of years. The greatest interest though is planned where new and emerging technologies are being developed to emplace special and long half-life wastes into geologic formations at moderate to deep depths for complete containment for periods of thousands of years. 7 refs., 2 figs

Nuclear waste storage container with metal matrix

Science.gov (United States)

Sump, Kenneth R.

1978-01-01

The invention relates to a storage container for high-level waste having a metal matrix for the high-level waste, thereby providing greater impact strength for the waste container and increasing heat transfer properties.

Nuclear waste storage container with metal matrix

International Nuclear Information System (INIS)

Sump, K.R.

1978-01-01

The invention relates to a storage container for high-level waste having a metal matrix for the high-level waste, thereby providing greater impact strength for the waste container and increasing heat transfer properties

Reactor containment

International Nuclear Information System (INIS)

Kawabe, Ryuhei; Yamaki, Rika.

1990-01-01

A water vessel is disposed and the gas phase portion of the water vessel is connected to a reactor container by a pipeline having a valve disposed at the midway thereof. A pipe in communication with external air is extended upwardly from the liquid phase portion to a considerable height so as to resist against the back pressure by a waterhead in the pipeline. Accordingly, when the pressure in the container is reduced to a negative level, air passes through the pipeline and uprises through the liquid phase portion in the water vessel in the form of bubbles and then flows into the reactor container. When the pressure inside of the reactor goes higher, since the liquid surface in the water vessel is forced down, water is pushed up into the pipeline. Since the waterhead pressure of a column of water in the pipeline and the pressure of the reactor container are well-balanced, gases in the reactor container are not leaked to the outside. Further, in a case if a great positive pressure is formed in the reactor container, the inner pressure overcomes the waterhead of the column of water, so that the gases containing radioactive aerosol uprise in the pipeline. Since water and the gases flow being in contact with each other, this can provide the effect of removing aerosol. (T.M.)

Structural and Functional Studies on the Fusion and Attachment Envelope Glycoproteins of Nipah Virus and Hendra Virus

National Research Council Canada - National Science Library

Bossart, Katharine

2003-01-01

Nipah virus (NiV) and Hendra (HeV) virus are emerging, biosafety level 4 paramyxoviruses responsible for fatal zoonotic infections of humans from pigs and horses, respectively, and are the prototypic members of a new Paramyxovirinae...

Technical studying on design and manufacturing of the container for low level radioactive solid waste from the KRR 1 and 2 decommissioning

International Nuclear Information System (INIS)

Park, Seung Kook; Chung, Un Soo; Yang, Sung Hong; Lee, Dong Gyu; Jung Ki Jung

2000-12-01

The design requirement and manufacturing criteria have been proposed on the container for the package, storage and transportation of low level radioactive solid waste from decommissioning of KRR 1 and 2. The structure analysis was carried out based on the design criteria, and the safety of the container was assessed. The container with its capacity of 4m 3 was selected for the radioactive solid waste storage. The proposed container was satisfied the criteria of ISO 1496/1 and the packaging standard of Atomic Energy Act. Manufacturing and testing standards of IAEA were also applied to the container. Stress distribution and deformation were analyzed under given condition using ANSYS code, and the maximum stress was verified to be within the yield stress without any structural deformation. From the results of lifting tests which were lifting from the four top corner fittings and fork-lift pockets, it was verified that this container was safe

High integrity container evaluation for solid waste disposal burial containers

International Nuclear Information System (INIS)

Josephson, W.S.

1996-01-01

In order to provide radioactive waste disposal practices with the greatest measure of public protection, Solid Waste Disposal (SWD) adopted the Nuclear Regulatory Commission (NRC) requirement to stabilize high specific activity radioactive waste prior to disposal. Under NRC guidelines, stability may be provided by several mechanisms, one of which is by placing the waste in a high integrity container (HIC). During the implementation process, SWD found that commercially-available HICs could not accommodate the varied nature of weapons complex waste, and in response developed a number of disposal containers to function as HICs. This document summarizes the evaluation of various containers that can be used for the disposal of Category 3 waste in the Low Level Burial Grounds. These containers include the VECTRA reinforced concrete HIC, reinforced concrete culvert, and the reinforced concrete vault. This evaluation provides justification for the use of these containers and identifies the conditions for use of each

Avian influenza surveillance with FTA cards: field methods, biosafety, and transportation issues solved.

Science.gov (United States)

Kraus, Robert H S; van Hooft, Pim; Waldenström, Jonas; Latorre-Margalef, Neus; Ydenberg, Ronald C; Prins, Herbert H T

2011-08-02

Avian Influenza Viruses (AIVs) infect many mammals, including humans(1). These AIVs are diverse in their natural hosts, harboring almost all possible viral subtypes(2). Human pandemics of flu originally stem from AIVs(3). Many fatal human cases during the H5N1 outbreaks in recent years were reported. Lately, a new AIV related strain swept through the human population, causing the 'swine flu epidemic'(4). Although human trading and transportation activity seems to be responsible for the spread of highly pathogenic strains(5), dispersal can also partly be attributed to wild birds(6, 7). However, the actual reservoir of all AIV strains is wild birds. In reaction to this and in face of severe commercial losses in the poultry industry, large surveillance programs have been implemented globally to collect information on the ecology of AIVs, and to install early warning systems to detect certain highly pathogenic strains(8-12). Traditional virological methods require viruses to be intact and cultivated before analysis. This necessitates strict cold chains with deep freezers and heavy biosafety procedures to be in place during transport. Long-term surveillance is therefore usually restricted to a few field stations close to well equipped laboratories. Remote areas cannot be sampled unless logistically cumbersome procedures are implemented. These problems have been recognised(13, 14) and the use of alternative storage and transport strategies investigated (alcohols or guanidine)(15-17). Recently, Kraus et al.(18) introduced a method to collect, store and transport AIV samples, based on a special filter paper. FTA cards(19) preserve RNA on a dry storage basis(20) and render pathogens inactive upon contact(21). This study showed that FTA cards can be used to detect AIV RNA in reverse-transcription PCR and that the resulting cDNA could be sequenced and virus genes and determined. In the study of Kraus et al.(18) a laboratory isolate of AIV was used, and samples were handled

Characterization of cement and bitumen waste forms containing simulated low-level waste incinerator ash

International Nuclear Information System (INIS)

Westsik, J.H. Jr.

1984-08-01

Incinerator ash from the combustion of general trash and ion exchange resins was immobilized in cement and bitumen. Tests were conducted on the resulting waste forms to provide a data base for the acceptability of actual low-level waste forms. The testing was done in accordance with the US Nuclear Regulatory Commission Technical Position on Waste Form. Bitumen had a measured compressive strength of 130 psi and a leachability index of 13 as measured with the ANS 16.1 leach test procedure. Cement demonstrated a compressive strength of 1400 psi and a leachability index of 7. Both waste forms easily exceed the minimum compressive strength of 50 psi and leachability index of 6 specified in the Technical Position. Irradiation to 10 8 Rad and exposure to 31 thermal cycles ranging from +60 0 ) to -30 0 C did not significantly impact these properties. Neither waste form supported bacterial or fungal growth as measured with ASTM G21 and G22 procedures. However, there is some indication of biodegradation due to co-metabolic processes. Concentration of organic complexants in leachates of the ash, cement and bitumen were too low to significantly affect the release of radionuclides from the waste forms. Neither bitumen nor cement containing incinerator ash caused any corrosion or degradation of potential container materials including steel, polyethylene and fiberglass. However, moist ash did cause corrosion of the steel

Biosafety assessment of transgenic Bt cotton on model animals

Directory of Open Access Journals (Sweden)

Sadia Bano

2016-05-01

Full Text Available Abstract Background: To know the effects of transgenic crops on soil microorganisms, animals and other expected hazards due to the introduction of GM crops into the environment is critical both scientifically and environmentally. The work was conducted to study the effect of insecticidal Bt protein on Rats and Earthworms. Methods: For this purpose, animals like rat and soil organisms like Earthworm were selected. Rats were selected on the basis of its 95% homology on genomic, cellular and enzymatic level with human while earthworm were preferred on the basis of their direct contact with soil to evaluate the impact of Bt (Cry1AC crop field soil on earthworm, secreted by root exudates of Bt cotton. Several physical, molecular, biochemical and histological analyses were performed on both Rats/Earthworms fed on standard diet (control group as well containing Bt protein (experimental group. Results: Molecular analyses such as immune Dot blot, SDS-PAGE, ELISA and PCR, confirmed the absence of Cry1Ac protein in blood and urine samples of rats, which were fed with Bt protein in their diet. Furthermore, histological studies showed that there was no difference in cellular architecture in liver, heart, kidney and intestine of Bt and non-Bt diet fed rats. To see the effect of Bt on earthworm two different groups were studied, one with transgenic plant field soil supplemented with grinded leaves of cotton and second group with non-Bt field soil. Conclusions: No lethal effects of transgenic Bt protein on the survival of earthworm and rats were observed. Bradford assay, Dipstick assay ELISA demonstrated the absence of Cry1Ac protein in the mid-gut epithelial tissue of earthworm. The results of present study will be helpful in successful deployment and commercial release of genetically modified crop in Pakistan.

Corrosion of steel drums containing simulated radioactive waste of low and intermediate level

International Nuclear Information System (INIS)

Farina, S.B.; Schulz Rodríguez, F.; Duffó, G.S.

2013-01-01

Ion-exchange resins are frequently used during the operation of nuclear power plants and constitute radioactive waste of low and intermediate level. For the final disposal inside the repository the resins are immobilized by cementation and placed inside steel drums. The eventful contamination of the resins with aggressive species may cause corrosion problems to the drums. In order to assess the incidence of this phenomenon and to estimate the lifespan of the steel drums, in the present work, the corrosion susceptibility of steel drums in contact with cemented ion-exchange resins contaminated with different aggressive species was studied. The aggressive species studied were chloride ions (main ionic species of concern) and sulphate ions (produced during radiolysis of the cationic exchange-resins after cementation). The corrosion rate of the steel was monitored over a time period of 900 days and a chemical and morphological analysis of the corrosion products formed on the steel in each condition was performed. When applying the results obtained in the present work to estimate the corrosion depth of the drums containing the cemented radioactive waste after a period of 300 years (foreseen durability of the Low and Intermediate Level Radioactive Waste facility in Argentina), it was found that in the most unfavourable case (high chloride contamination), the corrosion penetration will be considerably lower than the thickness of the wall of the steel drums. (author)

Reactor container

International Nuclear Information System (INIS)

Shibata, Satoru; Kawashima, Hiroaki

1984-01-01

Purpose: To optimize the temperature distribution of the reactor container so as to moderate the thermal stress distribution on the reactor wall of LMFBR type reactor. Constitution: A good heat conductor (made of Al or Cu) is appended on the outer side of the reactor container wall from below the liquid level to the lower face of a deck plate. Further, heat insulators are disposed to the outside of the good heat conductor. Furthermore, a gas-cooling duct is circumferentially disposed at the contact portion between the good heat conductor and the deck plate around the reactor container. This enables to flow the cold heat from the liquid metal rapidly through the good heat conductor to the cooling duct and allows to maintain the temperature distribution on the reactor wall substantially linear even with the abrupt temperature change in the liquid metal. Further, by appending the good heat conductor covered with inactive metals not only on the outer side but also on the inside of the reactor wall to introduce the heat near the liquid level to the upper portion and escape the same to the cooling layer below the roof slab, the effect can be improved further. (Ikeda, J.)

Radioactive wastes processing and disposing container

International Nuclear Information System (INIS)

Wada, Jiro; Kato, Hiroaki.

1987-01-01

Purpose: To obtain a processing and disposing container at low level radioactive wastes, excellent in corrosion and water resistance, as well as impact shock resistance for the retrieval storage over a long period of time. Constitution: The container is constituted with sands and pebbles as aggregates and glass fiber-added unsaturated polyester resins as binders. The container may entirely be formed with such material or only the entire inner surface may be formed with the material as liners. A container having excellent resistance to water, chemicals, freezing or melting, whether impact shock, etc. can be obtained, thereby enabling retrieval storage for radioactive wastes at the optimum low level. (Takahashi, M.)

High polymer composites for containers for the long-term storage of spent nuclear fuel and high level radioactive waste

International Nuclear Information System (INIS)

Bonin, H.W.; Vui, V.T.; Legault, J.-F.

1997-01-01

sufficiently shielded from the radiations emitted by the spent nuclear fuel or other high level radioactive waste, this material may well be an interesting candidate for this application. More recent work at RMC on the effects of radiations on PEEK has demonstrated that this polymer thermoplastic material was even superior to epoxies under radiation environments. Part of this research concentrated on the estimation of the doses accumulated in the container wall over the years using three basic models for the container: one without filling material, one with glass beads as proposed by AECL, and one using thorium dioxide (ThO 2 ) as filling material. This choice is based on the excellent physical and chemical properties of this compound (resistance to corrosion in particular) and to the expected low cost since thorium is usually discarded in the tailings of uranium mine concentrating plants. The dose calculations were carried out using the Microshield software and showed that both the epoxy and the PEEK could maintain structural integrity provided that they are shielded sufficiently against the radiations emitted by the high level radioactive waste. This research investigated also the resistance to the mechanical forces to which the container walls would be submitted in the underground vaults and it was concluded that these materials displayed sufficient mechanical strength for such application. It is permitted the identification of several aspects of the design of the storage containers that needed closer investigation. (author)

Corrosion of Alloy 690 process pot by sulfate containing high level radioactive waste at feed stage

International Nuclear Information System (INIS)

Sengupta, P.; Soudamini, N.; Kaushik, C.P.; Jagannath; Mishra, R.K.; Kale, G.B.; Raj, K.; Das, D.; Sharma, B.P.

2008-01-01

Prolonged exposure of Alloy 690 process pot to sulfate containing high level radioactive waste leads to (a) depletion of Cr from the alloy, (b) intergranular attack and (c) building up of Cr 2 O 3 -Ni 2 O 3 -Fe 2 O 3 mixed oxide surface layer containing Na and Cs sulfate precipitates. Time dependence of material loss from Alloy 690 is found to follow a linear relationship of the type Δw (material loss) = -7.05 + 0.05t. Corrosion rate calculated for 2400 h exposure is 3.66 mpy. Cr and Ni leach rates obtained for the same sample are 1.61 g m -2 d -1 and 2.52 g m -2 d -1 , respectively. Ni leach rates followed a linear time dependence relationship of the type dNL Ni /dt (leach rate) = -0.09 + 0.027t, whereas Cr leach rates obeyed a non-linear relationship of the type dNL Cr /dt (leach rate) = 0.241 + 0.027t - 1.33 x 10 -4 t 1/2

Aluminium oxide containers for the final disposal of high-level radioactive wastes

International Nuclear Information System (INIS)

Anon.

1984-03-01

The report presents a highly radioactive waste container concept based on the use of hot isostatically pressed aluminium oxide. The container is made of two cylindrical parts closed each at one end, which are sealed by means of a gold diffusion weld after introduction of the vitrified waste package. It is shown that the corrosion rate of the alumina material under conditions similar to those expected in Switzerland will most probably be less than 0.15 mm in 1000 years. The design consists of a cylinder about 2 m in length and 0.7 m in outer diameter, with hemispherical ends, ensuring that no tensional stress is present when the container is subjected to an external uniform pressure. The seal is positioned in the cylindrical part of the container, 150 mm away from the hemispherical end; in this way the stresses in the seal due to end effects and local bending can be made sufficiently small. A stress analysis shows that for such a design a wall thickness of 60 mm is sufficient to fulfill the requirements of the stress and stability criteria even with the use of a very high safety factor, for an external pressure of 300 bar, corresponding to a repository depth of 1200 m. For the protection of the personnel during the transport operations in the repository a metallic, temporary transport overpack is necessary; this overpack also protects the container against shocks. (author)

Topical treatment with coenzyme Q10-containing formulas improves skin's Q10 level and provides antioxidative effects.

Science.gov (United States)

Knott, Anja; Achterberg, Volker; Smuda, Christoph; Mielke, Heiko; Sperling, Gabi; Dunckelmann, Katja; Vogelsang, Alexandra; Krüger, Andrea; Schwengler, Helge; Behtash, Mojgan; Kristof, Sonja; Diekmann, Heike; Eisenberg, Tanya; Berroth, Andreas; Hildebrand, Janosch; Siegner, Ralf; Winnefeld, Marc; Teuber, Frank; Fey, Sven; Möbius, Janne; Retzer, Dana; Burkhardt, Thorsten; Lüttke, Juliane; Blatt, Thomas

2015-01-01

Ubiquinone (coenzyme Q10, Q10) represents an endogenously synthesized lipid-soluble antioxidant which is crucial for cellular energy production but is diminished with age and under the influence of external stress factors in human skin. Here, it is shown that topical Q10 treatment is beneficial with regard to effective Q10 replenishment, augmentation of cellular energy metabolism, and antioxidant effects. Application of Q10-containing formulas significantly increased the levels of this quinone on the skin surface. In the deeper layers of the epidermis the ubiquinone level was significantly augmented indicating effective supplementation. Concurrent elevation of ubiquinol levels suggested metabolic transformation of ubiquinone resulting from increased energy metabolism. Incubation of cultured human keratinocytes with Q10 concentrations equivalent to treated skin showed a significant augmentation of energy metabolism. Moreover, the results demonstrated that stressed skin benefits from the topical Q10 treatment by reduction of free radicals and an increase in antioxidant capacity. © 2015 International Union of Biochemistry and Molecular Biology.

Decay calculations on medium-level and actinide-containing wastes from the LWR fuel cycle. Pt. 2

International Nuclear Information System (INIS)

Haug, H.O.

1981-12-01

1. The radiotoxicity index as inherent property of the radionuclide inventory was calculated for medium-level and actinide-containing wastes. The calculations were based on the annual limits of intake of the German Radiation Protection Ordinance as well as the new values of annual limits of intake from ICRP-30. The latter imply a higher rating of the toxicity of transuranium nuclides and a lower rating of Sr-90, Tc-99, and Ra-226. Thus, the annual radiotoxicity index is controlled by the transuranics after 10 to 100 years. 2. From the comparison of the radiotoxicity index of conditional and packed wastes with the same volume of uranium ore, it was evaluated that the relative radiotoxicity of the medium-level wastes decreases below the level of pitchblende after less than 100 years and below a 3% uranium ore after less than 2000 of decay. However, based on ICRP-30, the relative radiotoxicity index decreases below the level of pitchblende after 1000 years and decays to the level of the 3% uranium ore at about 10 5 years. 3. The comparison of the radiotoxicity concentration of the total disposal layer with a uranium ore deposit shows that the radiotoxicity concentration based on ICRP-30 of the self-heating wastes placed in single boreholes decays within 2000 years (high level waste within 3000 years) below the level of a uranium ore deposit of 0.2% uranium. The radiotoxicity concentration of the medium-level process waste and the alpha-waste disposed off in disposal chambers decreases to the level of a uranium ore deposit with 0.4 to 6% uranium after about 10 4 years, and 1% after about 10 5 years. (orig./HP) [de

Stress corrosion cracking tests on high-level-waste container materials in simulated tuff repository environments

International Nuclear Information System (INIS)

Abraham, T.; Jain, H.; Soo, P.

1986-06-01

Types 304L, 316L, and 321 austenitic stainless steel and Incoloy 825 are being considered as candidate container materials for emplacing high-level waste in a tuff repository. The stress corrosion cracking susceptibility of these materials under simulated tuff repository conditions was evaluated by using the notched C-ring method. The tests were conducted in boiling synthetic groundwater as well as in the steam/air phase above the boiling solutions. All specimens were in contact with crushed Topopah Spring tuff. The investigation showed that microcracks are frequently observed after testing as a result of stress corrosion cracking or intergranular attack. Results showing changes in water chemistry during test are also presented

Development of integrated mechanistically-based degradation-mode models for performance assessment of high-level waste containers

International Nuclear Information System (INIS)

Bedrossian, P; Estill, J; Farmer, J; Hopper, R; Horn, J; Huang, J S; McCright, D; Roy, A; Wang, F; Wilfinger, K

1999-01-01

A key component of the Engineered Barrier System (EBS) being designed for containment of spent-fuel and high-level waste at the proposed geological repository at Yucca Mountain, Nevada is a two-layer canister. In this particular design, the inner barrier is made of a corrosion resistant material (CRM) such as Alloy 825, 625 or C-22, while the outer barrier is made of a corrosion-allowance material (CAM) such as A516 Gr 55, a carbon steel, or Monel 400. At the present time, Alloy C-22 and A516 G4 55 are favored

Ebola virus RNA editing depends on the primary editing site sequence and an upstream secondary structure.

Directory of Open Access Journals (Sweden)

Masfique Mehedi

Full Text Available Ebolavirus (EBOV, the causative agent of a severe hemorrhagic fever and a biosafety level 4 pathogen, increases its genome coding capacity by producing multiple transcripts encoding for structural and nonstructural glycoproteins from a single gene. This is achieved through RNA editing, during which non-template adenosine residues are incorporated into the EBOV mRNAs at an editing site encoding for 7 adenosine residues. However, the mechanism of EBOV RNA editing is currently not understood. In this study, we report for the first time that minigenomes containing the glycoprotein gene editing site can undergo RNA editing, thereby eliminating the requirement for a biosafety level 4 laboratory to study EBOV RNA editing. Using a newly developed dual-reporter minigenome, we have characterized the mechanism of EBOV RNA editing, and have identified cis-acting sequences that are required for editing, located between 9 nt upstream and 9 nt downstream of the editing site. Moreover, we show that a secondary structure in the upstream cis-acting sequence plays an important role in RNA editing. EBOV RNA editing is glycoprotein gene-specific, as a stretch encoding for 7 adenosine residues located in the viral polymerase gene did not serve as an editing site, most likely due to an absence of the necessary cis-acting sequences. Finally, the EBOV protein VP30 was identified as a trans-acting factor for RNA editing, constituting a novel function for this protein. Overall, our results provide novel insights into the RNA editing mechanism of EBOV, further understanding of which might result in novel intervention strategies against this viral pathogen.

Ebola virus RNA editing depends on the primary editing site sequence and an upstream secondary structure.

Science.gov (United States)

Mehedi, Masfique; Hoenen, Thomas; Robertson, Shelly; Ricklefs, Stacy; Dolan, Michael A; Taylor, Travis; Falzarano, Darryl; Ebihara, Hideki; Porcella, Stephen F; Feldmann, Heinz

2013-01-01

Ebolavirus (EBOV), the causative agent of a severe hemorrhagic fever and a biosafety level 4 pathogen, increases its genome coding capacity by producing multiple transcripts encoding for structural and nonstructural glycoproteins from a single gene. This is achieved through RNA editing, during which non-template adenosine residues are incorporated into the EBOV mRNAs at an editing site encoding for 7 adenosine residues. However, the mechanism of EBOV RNA editing is currently not understood. In this study, we report for the first time that minigenomes containing the glycoprotein gene editing site can undergo RNA editing, thereby eliminating the requirement for a biosafety level 4 laboratory to study EBOV RNA editing. Using a newly developed dual-reporter minigenome, we have characterized the mechanism of EBOV RNA editing, and have identified cis-acting sequences that are required for editing, located between 9 nt upstream and 9 nt downstream of the editing site. Moreover, we show that a secondary structure in the upstream cis-acting sequence plays an important role in RNA editing. EBOV RNA editing is glycoprotein gene-specific, as a stretch encoding for 7 adenosine residues located in the viral polymerase gene did not serve as an editing site, most likely due to an absence of the necessary cis-acting sequences. Finally, the EBOV protein VP30 was identified as a trans-acting factor for RNA editing, constituting a novel function for this protein. Overall, our results provide novel insights into the RNA editing mechanism of EBOV, further understanding of which might result in novel intervention strategies against this viral pathogen.

Survey of degradation modes of candidate materials for high-level radioactive-waste disposal containers

International Nuclear Information System (INIS)

Farmer, J.C.; McCright, R.D.; Kass, J.N.

1988-06-01

Three iron- to nickel-based austenitic alloys and three copper-based alloys are being considered as candidate materials for the fabrication of high-level radioactive-waste disposal containers. The austenitic alloys are Types 304L and 316L stainless steels and the high-nickel material Alloy 825. The copper-based alloys are CDA 102 (oxygen-free copper), CDA 613 (Cu-7Al), and CDA 715 (Cu-30Ni). Waste in the forms of both spent fuel assemblies from reactors and borosilicate glass will be sent to the prospective repository at Yucca Mountain, Nevada. The decay of radionuclides will result in the generation of substantial heat and gamma radiation. Container materials may undergo any of several modes of degradation in this environment, including undesirable phase transformations due to a lack of phase stability; atmospheric oxidation; general aqueous corrosion; pitting; crevice corrosion; intergranular stress corrosion cracking; and transgranular stress corrosion cracking. Problems specific to welds, such as hot cracking, may also occur. A survey of the literature has been prepared as part of the process of selecting, from among the candidates, a material that is adequate for repository conditions. The modes of degradation are discussed in detail in the survey to determine which apply to the candidate alloys and the extent to which they may actually occur. The eight volumes of the survey are summarized in Sections 1 through 8 of this overview. The conclusions drawn from the survey are also given in this overview

Simplified dynamic buckling assessment of steel containments

International Nuclear Information System (INIS)

Farrar, C.R.; Duffey, T.A.; Renick, D.H.

1993-01-01

A simplified, three-degree-of-freedom analytical procedure for performing a response spectrum buckling analysis of a thin containment shell is developed. Two numerical examples with R/t values which bound many existing steel containments are used to illustrate the procedure. The role of damping on incipient buckling acceleration level is evaluated for a regulatory seismic spectrum using the two numerical examples. The zero-period acceleration level that causes incipient buckling in either of the two containments increases 31% when damping is increased from 1% to 4% of critical. Comparisons with finite element results on incipient buckling levels are favorable

Interactions between proteins and carbon-based nanoparticles: exploring the origin of nanotoxicity at the molecular level.

Science.gov (United States)

Zuo, Guanghong; Kang, Seung-Gu; Xiu, Peng; Zhao, Yuliang; Zhou, Ruhong

2013-05-27

The widespread application of nanomaterials has spurred an interest in the study of interactions between nanoparticles and proteins due to the biosafety concerns of these nanomaterials. In this review, a summary is presented of some of the recent studies on this important subject, especially on the interactions of proteins with carbon nanotubes (CNTs) and metallofullerenols. Two potential molecular mechanisms have been proposed for CNTs' inhibition of protein functions. The driving forces of CNTs' adsorption onto proteins are found to be mainly hydrophobic interactions and the so-called π-π stacking between CNTs' carbon rings and proteins' aromatic residues. However, there is also recent evidence showing that endohedral metallofullerenol Gd@C82 (OH)22 can be used to inhibit tumor growth, thus acting as a potential nanomedicine. These recent findings have provided a better understanding of nanotoxicity at the molecular level and also suggested therapeutic potential by using nanoparticles' cytotoxicity against cancer cells. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Correlation between levels of conflict and containment on acute psychiatric wards: the city-128 study.

Science.gov (United States)

Bowers, Len; Stewart, Duncan; Papadopoulos, Chris; Iennaco, Joanne DeSanto

2013-05-01

OBJECTIVE Attainment of safe, calm inpatient psychiatric wards that are conducive to positive therapeutic care is crucial. On such wards, rates of coerced medication, seclusion, manual restraint and other types of containment are comparatively low, and, usually, rates of conflict-for example, aggression, substance use, and absconding-are also low. Sometimes, however, wards maintain low rates of containment even when conflict rates are high. This study investigated wards with the counterintuitive combination of low containment and high conflict or high containment and low conflict. METHODS The authors conducted a secondary analysis of cross-sectional data collected from 136 acute psychiatric wards across England in 2004-2005. The wards were categorized into four groups on the basis of median splits of containment and conflict rates: high conflict and high containment, high conflict and low containment, low conflict and low containment, and low conflict and high containment. Features significantly associated with these ward types were identified. RESULTS Among the variables significantly associated with the various typologies, some-for example, environmental quality-were changeable, and others-such as social deprivation of the area served-were fixed. High-conflict, low-containment wards had higher rates of male staff and lower-quality environments than other wards. Low-conflict, high-containment wards had higher numbers of beds. High-conflict, high-containment wards utilized more temporary staff as well as more unqualified staff. No overall differences were associated with low-conflict, low-containment wards. CONCLUSIONS Wards can make positive changes to achieve a low-containment, nonpunitive culture, even when rates of patient conflict are high.

The Convergence of High-Consequence Livestock and Human Pathogen Research and Development: A Paradox of Zoonotic Disease

Directory of Open Access Journals (Sweden)

Julia M. Michelotti

2018-05-01

Full Text Available The World Health Organization (WHO estimates that zoonotic diseases transmitted from animals to humans account for 75 percent of new and emerging infectious diseases. Globally, high-consequence pathogens that impact livestock and have the potential for human transmission create research paradoxes and operational challenges for the high-containment laboratories that conduct work with them. These specialized facilities are required for conducting all phases of research on high-consequence pathogens (basic, applied, and translational with an emphasis on both the generation of fundamental knowledge and product development. To achieve this research mission, a highly-trained workforce is required and flexible operational methods are needed. In addition, working with certain pathogens requires compliance with regulations such as the Centers for Disease Control (CDC and the U.S. Department of Agriculture (USDA Select Agent regulations, which adds to the operational burden. The vast experience from the existing studies at Plum Island Animal Disease Center, other U.S. laboratories, and those in Europe and Australia with biosafety level 4 (BSL-4 facilities designed for large animals, clearly demonstrates the valuable contribution this capability brings to the efforts to detect, prepare, prevent and respond to livestock and potential zoonotic threats. To raise awareness of these challenges, which include biosafety and biosecurity issues, we held a workshop at the 2018 American Society for Microbiology (ASM Biothreats conference to further discuss the topic with invited experts and audience participants. The workshop covered the subjects of research funding and metrics, economic sustainment of drug and vaccine development pipelines, workforce turnover, and the challenges of maintaining operational readiness of high containment laboratories.

Lead iron phosphate glass as a containment medium for disposal of high-level nuclear waste

Science.gov (United States)

Boatner, Lynn A.; Sales, Brian C.

1989-01-01

Lead-iron phosphate glasses containing a high level of Fe.sub.2 O.sub.3 for use as a storage medium for high-level radioactive nuclear waste. By combining lead-iron phosphate glass with various types of simulated high-level nuclear waste, a highly corrosion resistant, homogeneous, easily processed glass can be formed. For corroding solutions at 90.degree. C., with solution pH values in the range between 5 and 9, the corrosion rate of the lead-iron phosphate nuclear waste glass is at least 10.sup.2 to 10.sup.3 times lower than the corrosion rate of a comparable borosilicate nuclear waste glass. The presence of Fe.sub.2 O.sub.3 in forming the lead-iron phosphate glass is critical. Lead-iron phosphate nuclear waste glass can be prepared at temperatures as low as 800.degree. C., since they exhibit very low melt viscosities in the 800.degree. to 1050.degree. C. temperature range. These waste-loaded glasses do not readily devitrify at temperatures as high as 550.degree. C. and are not adversely affected by large doses of gamma radiation in H.sub.2 O at 135.degree. C. The lead-iron phosphate waste glasses can be prepared with minimal modification of the technology developed for processing borosilicate glass nuclear wasteforms.

Settlement behavior of the container for high-level nuclear waste disposal. Centrifuge model tests and proposal for simple evaluation method for settlement behavior

International Nuclear Information System (INIS)

Nakamura, Kunihiko; Tanaka, Yukihisa

2004-01-01

In Japan, bentonite will be used as buffer materials in high-level nuclear waste disposal. In the softened buffer material with the infiltration of various properties of under ground water, if the container deeply sinks, the decrease of the thickness of the buffer materials may lose the required abilities. Therefore, it is very important to consider settlement of container. In this study, influences of distilled water and artificial seawater on the settlement of the container were investigated and a simple evaluation method for settlement of the container was proposed. The following findings were obtained from this study. (1) Under the distilled water, amount of settlement decreases exponentially as dry density becomes larger. (2) While the amount of settlement of container under the 10% artificial seawater was almost equal to the one in the distilled water, the container was floating under the 100% artificial seawater. (3) The simple evaluation method for settlement of container was proposed based on the diffuse double layer theory, and the effectiveness of the proposed method was demonstrated by the results of several experiments. (author)

Factors influencing biosafety level and lai among the staff of medical laboratories

Directory of Open Access Journals (Sweden)

Anna Kozajda

2013-08-01

Full Text Available Background: The aim of the study was to assess the biological risks of medical laboratory employees with particular focus on laboratory acquired infection (LAI, activities having the greatest risk, accidents with biological material, post exposure procedure, preventive measures and workers' knowledge about biological exposure. Materials and Methods: The study involved 9 laboratories. A questionnaire survey was attended by 123 employees and 9 heads of these units with the use of two questionnaires for laboratory workers and the managers. Results: 32.5% of the respondents (40 persons had an accident at least once. Needlestick or a broken glass injury covered 18.7% respondents (23 persons, while splashing the skin, mucous membranes or conjunctivae related to 22.8% (28 persons. Among the employees who had an accident, only 45% of the respondents (18 persons reported this to the manager. Microbes dominant in the biological material were known only to 57 respondents (46.3%, less than half could correctly give an example of a disease (57 persons, 46.3%. More than half of the respondents admitted that they do not know all of the possible routes of infection while working in the laboratory (68 persons, 55.3%. Conclusions: In the study population, a high incidence of accidents was observed, usually during blood sampling and transfer of biological material. Condition of the workers' equipment with personal protective measures and laboratory facilities in devices to reduce the risk of infection and procedures for handling the potentially infectious material should be considered as insufficient. Lack of basic knowledge of the employees about biohazards at workplaces was shown. Med Pr 2013;64(4:473–486

Factors influencing biosafety level and LAI among the staff of medical laboratories.

Science.gov (United States)

Kozajda, Anna; Bródka, Karolina; Szadkowska-Stańczyk, Irena

2013-01-01

The aim of the study was to assess the biological risks of medical laboratory employees with particular focus on laboratory acquired infection (LAI), activities having the greatest risk, accidents with biological material, post exposure procedure, preventive measures and workers' knowledge about biological exposure. The study involved 9 laboratories. A questionnaire survey was attended by 123 employees and 9 heads of these units with the use of two questionnaires for laboratory workers and the managers. 32.5% of the respondents (40 persons) had an accident at least once. Needlestick or a broken glass injury covered 18.7% respondents (23 persons), while splashing the skin, mucous membranes or conjunctivae related to 22.8% (28 persons). Among the employees who had an accident, only 45% of the respondents (18 persons) reported this to the manager. Microbes dominant in the biological material were known only to 57 respondents (46.3%), less than half could correctly give an example of a disease (57 persons, 46.3%). More than half of the respondents admitted that they do not know all of the possible routes of infection while working in the laboratory (68 persons, 55.3%). In the study population, a high incidence of accidents was observed, usually during blood sampling and transfer of biological material. Condition of the workers' equipment with personal protective measures and laboratory facilities in devices to reduce the risk of infection and procedures for handling the potentially infectious material should be considered as insufficient. Lack of basic knowledge of the employees about biohazards at workplaces was shown.

Factors influencing biosafety level and lai among the staff of medical laboratories

OpenAIRE

Anna Kozajda; Karolina Bródka; Irena Szadkowska-Stańczyk

2013-01-01

Background: The aim of the study was to assess the biological risks of medical laboratory employees with particular focus on laboratory acquired infection (LAI), activities having the greatest risk, accidents with biological material, post exposure procedure, preventive measures and workers' knowledge about biological exposure. Materials and Methods: The study involved 9 laboratories. A questionnaire survey was attended by 123 employees and 9 heads of these units with the use of two questionn...

Emergency reactor container cooling facility

International Nuclear Information System (INIS)

Suzuki, Hiroaki; Matsumoto, Tomoyuki.

1992-01-01

The present invention concerns an emergency cooling facility for a nuclear reactor container having a pressure suppression chamber, in which water in the suppression chamber is effectively used for cooling the reactor container. That is, the lower portion of a water pool in the pressure suppression chamber and the inside of the reactor container are connected by a pipeline. The lower end of the pipeline and a pressurized incombustible gas tank disposed to the outside of the reactor container are connected by a pipeline by way of valves. Then, when the temperature of the lower end of the pressure vessel exceeds a predetermined value, the valves are opened. If the valves are opened, the incombustible gas flows into the lower end of the pipeline connecting the lower portion of the water pool in the pressure suppression chamber and the inside of the reactor container. Since the inside of the pipeline is a two phase flow comprising a mixture of a gas phase and a liquid phase, the average density is decreased. Therefore, the water level of the two phase flow is risen by the level difference between the inside and the outside of the pipeline and, finally, the two phase mixture is released into the reactor container. As a result, the reactor container can be cooled by water in the suppression chamber by a static means without requiring pumps. (I.S.)

Radioactive waste sealing container

International Nuclear Information System (INIS)

Tozawa, S.; Kitamura, T.; Sugimoto, S.

1984-01-01

A low- to medium-level radioactive waste sealing container is constructed by depositing a foundation coating consisting essentially of zinc, cadmium or a zinc-aluminum alloy over a steel base, then coating an organic synthetic resin paint containing a metal phosphate over the foundation coating, and thereafter coating an acryl resin, epoxy resin, and/or polyurethane paint. The sealing container can consist of a main container body, a lid placed over the main body, and fixing members for clamping and fixing the lid to the main body. Each fixing member may consist of a material obtained by depositing a coating consisting essentially of cadmium or a zinc-aluminum alloy over a steel base

Effects of graded levels of tannin-containing tropical tree leaves on in vitro rumen fermentation, total protozoa and methane production.

Science.gov (United States)

Bhatta, R; Saravanan, M; Baruah, L; Prasad, C S

2015-03-01

This study was carried out to determine the effect of graded levels of tannin-containing tropical tree leaves, Autocarpus integrifolis, Azardirachta indica and Ficus bengalensis, on the in vitro rumen fermentation pattern, total protozoa and methane suppression in order to establish the optimum dose of these leaves for inclusion in the ruminant diets. The air-dried and ground samples of Au. integrifolis, Az. indica and Ficus bengalensis were subjected to in vitro incubation using 30 ml buffered rumen fluid at 0, 2.5, 5.0, 10.0, 15.0, 20.0, 25.0 and 30.0% (dry matter refers to moisture-free basis) of a total mixed ration (TMR: refers to mixture of roughage and concentrate containing cereals and oil cakes) devoid of tannin. The TMR for the experimental incubation was prepared by mixing 40 parts of ground Elusine coracana straw as roughage source with 60 parts of concentrate mixture. The leaves contained an average 130 g kg(-1) CP with 7·0 MJ of ME kg(-1) DM. The average neutral detergent fibre (NDF) content was content also showed similar trend. However, condensed tannin (CT) was highest in F. bengalensis (260) followed by Au. integrifolis (186) and Az. indica (138). There was significant (P 5.0%) reduced TVFA concentration. Protozoa (cells per mL) were similar at all levels of inclusion with Au. integrifolis, but reduced in case of F. bengalensis and Az. indica. As the level of tannin increased in the incubation medium, there was a linear reduction in methane concentration. Highest methane reduction (%) was recorded in incubations supplemented with Az. indica (61.5) followed by F. bengalensis (46.8) and Au. integrifolis (30.3). It was established from this study that tropical leaves of F. bengalensis, Au. integrifolis and Az. indica suppress methanogenesis. Ficus bengalensis, Au. integrifolis and Az. indica leaves are of interest in the enteric methane ameliorative strategies. Total mixed ration containing 10-15% ground F. bengalensis or Au. integrifolis or Az

Rotulagem de alimentos que contém Organismos Geneticamente Modificados: políticas internacionais e Legislação no Brasil Labeling of food containing Genetically Modified Organisms: international policies and Brazilian legislation

Directory of Open Access Journals (Sweden)

Thadeu Estevam Moreira Maramaldo Costa

2011-08-01

Full Text Available O crescimento da área de superfície plantada com as culturas geneticamente modificadas, com a consequente liberação dessas lavouras para o ambiente e para a comercialização, levantou questionamentos sobre a segurança destes produtos. A entrada em vigor do Protocolo de Cartagena sobre Biossegurança , fez com que houvesse a necessidade de aquisição de informações e capacitação nesta área para a implementação de políticas de biossegurança e para tomadas de decisões por partes dos governos em níveis nacionais, regionais e internacionais. O presente artigo apresenta as duas principais vertentes políticas sobre rotulagem de produtos geneticamente modificados (uma adotada pelos Estados Unidos da América e outra pela União Europeia, assim como a posição adotada pelo Brasil e sua atual legislação acerca de rotulagem e liberação comercial de produtos geneticamente modificados (GM.The increase in surface area planted with genetically modified crops, with the subsequent transfer of such crops into the general environment for commercial trade, has raised questions about the safety of these products. The introduction of the Cartagena Protocol on Biosafety has led to the need to produce information and ensure training in this area for the implementation of policies on biosafety and for decision-making on the part of governments at the national, regional and international level. This article presents two main standpoints regarding the labeling of GM products (one adopted by the United States and the other by the European Union, as well as the position adopted by Brazil and its current legislation on labeling and commercial release of genetically modified (GM products.

Properties and solubility of chrome in iron alumina phosphate glasses containing high level nuclear waste

International Nuclear Information System (INIS)

Huang, W.; Day, D.E.; Ray, C.S.; Kim, C.W.; Reis, S.T.D.

2004-01-01

Chemical durability, glass formation tendency, and other properties of iron alumina phosphate glasses containing 70 wt% of a simulated high level nuclear waste (HLW), doped with different amounts of Cr 2 O 3 , have been investigated. All of the iron alumina phosphate glasses had an outstanding chemical durability as measured by their small dissolution rate (1 . 10 -9 g/(cm 2 . min)) in deionized water at 90 C for 128 d, their low normalized mass release as determined by the product consistency test (PCT) and a barely measurable corrosion rate of 2 . d) after 7 d at 200 C by the vapor hydration test (VHT). The solubility limit for Cr 2 O 3 in the iron phosphate melts was estimated at 4.1 wt%, but all of the as-annealed melts contained a few percent of crystalline Cr 2 O 3 that had no apparent effect on the chemical durability. The chemical durability was unchanged after deliberate crystallization, 48 h at 650 C. These iron phosphate waste forms, with a waste loading of at least 70 wt%, can be readily melted in commercial refractory crucibles at 1250 C for 2 to 4 h, are resistant to crystallization, meet all current US Department of Energy requirements for chemical durability, and have a solubility limit for Cr 2 O 3 which is at least three times larger than that for borosilicate glasses. (orig.)

A Study on the Model of Detecting the Liquid Level of Sealed Containers Based on Kirchhoff Approximation Theory.

Science.gov (United States)

Zhang, Bin; Song, Wen-Ai; Wei, Yue-Juan; Zhang, Dong-Song; Liu, Wen-Yi

2017-06-15

By simulating the sound field of a round piston transducer with the Kirchhoff integral theorem and analyzing the shape of ultrasound beams and propagation characteristics in a metal container wall, this study presents a model for calculating the echo sound pressure by using the Kirchhoff paraxial approximation theory, based on which and according to different ultrasonic impedance between gas and liquid media, a method for detecting the liquid level from outside of sealed containers is proposed. Then, the proposed method is evaluated through two groups of experiments. In the first group, three kinds of liquid media with different ultrasonic impedance are used as detected objects; the echo sound pressure is calculated by using the proposed model under conditions of four sets of different wall thicknesses. The changing characteristics of the echo sound pressure in the entire detection process are analyzed, and the effects of different ultrasonic impedance of liquids on the echo sound pressure are compared. In the second group, taking water as an example, two transducers with different radii are selected to measure the liquid level under four sets of wall thickness. Combining with sound field characteristics, the influence of different size transducers on the pressure calculation and detection resolution are discussed and analyzed. Finally, the experimental results indicate that measurement uncertainly is better than ±5 mm, which meets the industrial inspection requirements.

A Study on the Model of Detecting the Liquid Level of Sealed Containers Based on Kirchhoff Approximation Theory

Directory of Open Access Journals (Sweden)

Bin Zhang

2017-06-01

Full Text Available By simulating the sound field of a round piston transducer with the Kirchhoff integral theorem and analyzing the shape of ultrasound beams and propagation characteristics in a metal container wall, this study presents a model for calculating the echo sound pressure by using the Kirchhoff paraxial approximation theory, based on which and according to different ultrasonic impedance between gas and liquid media, a method for detecting the liquid level from outside of sealed containers is proposed. Then, the proposed method is evaluated through two groups of experiments. In the first group, three kinds of liquid media with different ultrasonic impedance are used as detected objects; the echo sound pressure is calculated by using the proposed model under conditions of four sets of different wall thicknesses. The changing characteristics of the echo sound pressure in the entire detection process are analyzed, and the effects of different ultrasonic impedance of liquids on the echo sound pressure are compared. In the second group, taking water as an example, two transducers with different radii are selected to measure the liquid level under four sets of wall thickness. Combining with sound field characteristics, the influence of different size transducers on the pressure calculation and detection resolution are discussed and analyzed. Finally, the experimental results indicate that measurement uncertainly is better than ±5 mm, which meets the industrial inspection requirements.

biosafety regulations

African Journals Online (AJOL)

Modern biotechnology will provide important tools for developing countries seeking to gain benefits from ..... several conferences in Latin America that have difficulties in successful transfer of the technology .... innovation in biotechnology.

Biosecurity through Public Health System Design.

Energy Technology Data Exchange (ETDEWEB)

Beyeler, Walter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finley, Patrick D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Arndt, William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walser, Alex Christian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mitchell, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-11-01

We applied modeling and simulation to examine the real-world tradeoffs between developingcountry public-health improvement and the need to improve the identification, tracking, and security of agents with bio-weapons potential. Traditionally, the international community has applied facility-focused strategies for improving biosecurity and biosafety. This work examines how system-level assessments and improvements can foster biosecurity and biosafety. We modeled medical laboratory resources and capabilities to identify scenarios where biosurveillance goals are transparently aligned with public health needs, and resource are distributed in a way that maximizes their ability to serve patients while minimizing security a nd safety risks. Our modeling platform simulates key processes involved in healthcare system operation, such as sample collection, transport, and analysis at medical laboratories. The research reported here extends the prior art by provided two key compone nts for comparative performance assessment: a model of patient interaction dynamics, and the capability to perform uncertainty quantification. In addition, we have outlined a process for incorporating quantitative biosecurity and biosafety risk measures. Two test problems were used to exercise these research products examine (a) Systemic effects of technological innovation and (b) Right -sizing of laboratory networks.

Standard practice for cell sorting in a BSL-3 facility.

Science.gov (United States)

Perfetto, Stephen P; Ambrozak, David R; Nguyen, Richard; Roederer, Mario; Koup, Richard A; Holmes, Kevin L

2011-01-01

Over the past decade, there has been a rapid growth in the number of BSL-3 and BSL-4 laboratories in the USA and an increase in demand for infectious cell sorting in BSL-3 laboratories. In 2007, the International Society for Advancement of Cytometry (ISAC) Biosafety Committee published standards for the sorting of unfixed cells and is an important resource for biosafety procedures when performing infectious cell sorting. Following a careful risk assessment, if it is determined that a cell sorter must be located within a BSL-3 laboratory, there are a variety of factors to be considered prior to the establishment of the laboratory. This chapter outlines procedures for infectious cell sorting in a BSL-3 environment to facilitate the establishment and safe operation of a BSL-3 cell sorting laboratory. Subjects covered include containment verification, remote operation, disinfection, personal protective equipment (PPE), and instrument-specific modifications for enhanced aerosol evacuation.

THE END OF TRANSGENIC FOOD LABELING AND THE RIGHT TO INFORMATION CONSERVED BY THE CONSUMER DEFENSE CODE IN THE LIGHT OF THE FEDERAL CONSTITUTION OF 1988

Directory of Open Access Journals (Sweden)

Ingrid Lima Barbosa

2018-03-01

Full Text Available Bill No. 4.148/08 intends to eliminate the requirement for the “T” symbol in the packaging of products containing more than one percent of GMOs in its composition, due to the alleged negative charge that it presents, going against what is advocated by the Biosafety Law, the Consumer Defense Code, as well as the Federal Constitution. Thus, the objective is to analyze the consequences to consumers, in case the bill is eventually sanctioned, as well as if there is an affront to the fundamental precepts listed in the Magna Carta and other legal diplomas, through the inductive method of research supported by the bibliographic collection available. It was concluded that, in addition to confronting the provisions of the Consumer Defense Code, there is also a violation of the Cartagena Protocol on Biosafety, as well as the material unconstitutionality of Bill No. 4.148/08, resulting from the affront to articles 5, XIV and XXXII, and 170, V of the Constitution.

Reduction in oxidative stress levels in the colonic mucosa without fecal stream after the application of enemas containing aqueous Ilex paraguariensis extract.

Science.gov (United States)

Cunha, Fernando Lorenzetti da; Silva, Camila Morais Gonçalves da; Almeida, Marcos Gonçalves de; Lameiro, Thais Miguel do Monte; Marques, Letícia Helena Souza; Margarido, Nelson Fontana; Martinez, Carlos Augusto Real

2011-08-01

To evaluate the antioxidant effects of enemas containing aqueous extract of Ilex paraguariensis, comparing segments with and without fecal stream and correlating the segments with the duration of intervention. Twenty-six Wistar rats were subjected to a diversion of the fecal stream in the left colon by a proximal colostomy and distal mucosal fistula. The rats were distributed randomly into two experimental groups of 13 animals each based on the time of sacrifice after surgical procedure (two or four weeks). Each group was then divided into two experimental subgroups that received either second daily enemas containing 0.9% saline solution or aqueous extract of Ilex paraguariensis at 0.2g/100g. Colitis was diagnosed by histopathological analysis and the detection of oxidative tissue damage by measuring the levels of malondialdehyde. The Mann-Whitney test was used to compare the tissue levels of malondialdehyde between colon segments with and without fecal stream in each experimental group, and the Kruskal-Wallis test was used to verify the variance between the levels of oxidative stress according the duration of the irrigation; both tests determined significance at 5% (pirrigation were 0.05±0.006 and 0.06±0.006, and 0.05± 0.03 and 0.08 ±0.02, respectively. The malondialdehyde levels in the animals irrigated with Ilex paraguariensis with and without fecal stream after two and four weeks of irrigation were 0.010±0.002 and 0.02±0.004, and 0.03±0.007 and 0.04±0.01, respectively. After two and four weeks of intervention, the levels of malondialdehyde were lower in the animals irrigated with Ilex paraguariensis regardless of the time of irrigation (p=0.0001 and p=0.002, respectively). The daily rectal application of enemas containing aqueous extract of Ilex paraguariensis decreases oxidative tissue damage in the colon without fecal stream regardless of the time of irrigation.

Negative impact of laws regarding biosecurity and bioterrorism on real diseases

NARCIS (Netherlands)

Wurtz, N.; Grobusch, M. P.; Raoult, D.

2014-01-01

Research on highly pathogenic microorganisms in biosafety level 3 and 4 laboratories is very important for human public health, as it provides opportunities for the development of vaccines and novel therapeutics as well as diagnostic methods to prevent epidemics. However, in recent years, after the

Policies and regulations in Mexico with regard to genetic technology and food security

OpenAIRE

Colmenarez Ortiz, Claudia; Ortiz Garcia, Sol

2016-01-01

In 1988 the first application for field trials of a GMO was formally received in Mexico. Since then a Biosafety law, few bylaws and national official standards were enacted in order to regulate the safe use of GMOs and to evaluate, control and avoid adverse effects to human health and the environment. The Law on Biosafety of Genetically Modified Organisms was enacted in 2005 in order to comply with international obligations derived from the Cartagena Protocol on Biosafety signed by Mexico in ...

Restraint stress in lactating mice alters the levels of sulfur-containing amino acids in milk.

Science.gov (United States)

Nishigawa, Takuma; Nagamachi, Satsuki; Ikeda, Hiromi; Chowdhury, Vishwajit S; Furuse, Mitsuhiro

2018-03-30

It is well known that maternal stress during the gestation and lactation periods induces abnormal behavior in the offspring and causes a lowering of the offspring's body weight. Various causes of maternal stress during the lactation period, relating to, for example, maternal nutritional status and reduced maternal care, have been considered. However, little is known about the effects on milk of maternal stress during the lactation period. The current study aimed to determine whether free amino acids, with special reference to sulfur-containing amino acids in milk, are altered by restraint stress in lactating mice. The dams in the stress group were restrained for 30 min at postnatal days 2, 4, 6, 8, 10 and 12. Restraint stress caused a reduction in the body weight of lactating mice. The concentration of taurine and cystathionine in milk was significantly higher in the stress group, though stress did not alter their concentration in maternal plasma. The ratio of taurine concentration in milk to its concentration in maternal plasma was significantly higher in the stress group, suggesting that stress promoted taurine transportation into milk. Furthermore, taurine concentration in milk was positively correlated with corticosterone levels in plasma. In conclusion, restraint stress in lactating mice caused the changes in the metabolism and in the transportation of sulfur-containing amino acids and resulted in higher taurine concentration in milk. Taurine concentration in milk could also be a good parameter for determining stress status in dams.

Seismic damage assessment of reinforced concrete containment structures

International Nuclear Information System (INIS)

Cho, HoHyun; Koh, Hyun-Moo; Hyun, Chang-Hun; Kim, Moon-Soo; Shin, Hyun Mock

2003-01-01

This paper presents a procedure for assessing seismic damage of concrete containment structures using the nonlinear time-history numerical analysis. For this purpose, two kinds of damage index are introduced at finite element and structural levels. Nonlinear finite element analysis for the containment structure applies PSC shell elements using a layered approach leading to damage indices at finite element and structural levels, which are then used to assess the seismic damage of the containment structure. As an example of such seismic damage assessment, seismic damages of the containment structure of Wolsong I nuclear power plant in Korea are evaluated against 30 artificial earthquakes generated with a wide range of PGA according to US NRC regulatory guide 1.60. Structural responses and corresponding damage index according to the level of PGA and nonlinearity are investigated. It is also shown that the containment structure behaves elastically for earthquakes corresponding to or lower than DBE. (author)

Containers and overpacks for high-level radioactive waste in deep geological disposal. Conditions: French Corrosion Programme

International Nuclear Information System (INIS)

Crusset, D.; Plas, F.; Santarini, G.

2003-01-01

Within the framework of the act of French law dated 31 December, 1991, ANDRA (National Radioactive Waste Management Agency) is responsible for conducting the feasibility study on disposal of reversible and irreversible high-level or long-life radioactive waste in deep geological formations. Consequently, ANDRA is carrying out research on corrosion of the metallic materials envisaged for the possible construction of overpacks for vitrified waste packages or containers for spent nuclear fuel. Low-alloy or unalloyed steels and the passive alloys (Fe-Ni-Cr-Mo) constitute the two families of materials studied and ANDRA has set up a research programme in partnership with other research organisations. The 'broad outlines' of the programme, which includes experimental and modelling operations, are presented. (authors)

Nucleic Acid Amplification as used in the Diagnosis and ...

African Journals Online (AJOL)

Nucleic Acid Amplification as used in the Diagnosis and Management of Viral Diseases: A Review. ... Bayero Journal of Pure and Applied Sciences ... are highly unculturable, fastidious or hazardous to the laboratory personnel and diagnosis depends on serological methods or culture in an expensive bio-safety level.

High polymer-based composites for the fabrication of containers for the long-term storage or disposal of high-level radioactive waste

Energy Technology Data Exchange (ETDEWEB)

Miedema, I.; Bonin, H.W.; Bui, V.T. [Royal Military College of Canada, Dept. of Chemistry and Chemical Engineering, Kingston, Ontario (Canada)

2002-07-01

This study considers the application of PEEK and continuous graphite fibre composite as the principal component in a high level nuclear waste disposal container. The ultimate radioactive environment to which the containers will be exposed has been simulated using a SLOWPOKE-2 research nuclear reactor and a specialized heated irradiation chamber. Doses of up to 1 MGy were given to samples in combination with elevated temperatures (15{sup o}C to 75{sup o}C), which induced mechanical and chemical changes in the material. Mechanically, the composite and virgin polymer samples were minimally affected, rarely deviating beyond one standard deviation of the properties of unirradiated samples. Molecularly, crosslinking between adjacent polymer chains in the amorphous region is the primary observed phenomenon as a consequence of the radiation treatment. This effect is diminished with the application of heat during irradiation. Slight changes in crystallinity were also noted through molecular rearrangement, beginning with slight increases at lower radiation doses, and then minor decreases are noted with larger doses ({approx}10{sup 6} Gy). It is also shown in this study that the rate of radiation effects that is typical in this polymer is dependent on the temperature of irradiation. The results confirm that polymer-based composite materials, such as the PEEK/graphite fibre material studied here, are excellent candidates for the fabrication of the containers for the disposal of high-level radioactive waste. (author)

Brewing for Students: An Inquiry-Based Microbiology Lab

Directory of Open Access Journals (Sweden)

Brian K. Sato

2015-08-01

Full Text Available In an effort to improve and assess student learning, there has been a push to increase the incorporation of discovery-driven modules and those that contain real-world relevance into laboratory curricula. To further this effort, we have developed, implemented, and assessed an undergraduate microbiology laboratory experiment that requires students to use the scientific method while brewing beer. The experiment allows students to brew their own beer and characterize it based on taste, alcohol content, calorie content, pH, and standard reference method. In addition, we assessed whether students were capable of achieving the module learning objectives through a pre-/posttest, student self-evaluation, exam-embedded questions, and an associated worksheet. These objectives included describing the role of the brewing ingredients and predicting how altering the ingredients would affect the characteristics of the beer, amongst others. By completing this experimental module, students accomplished the module objectives, had greater interest in brewing, and were more likely to view beer in scientific terms. Editor's Note:The ASM advocates that students must successfully demonstrate the ability to explain and practice safe laboratory techniques. For more information, read the laboratory safety section of the ASM Curriculum Recommendations: Introductory Course in Microbiology and the Guidelines for Biosafety in Teaching Laboratories, available at www.asm.org. The Editors of JMBE recommend that adopters of the protocols included in this article follow a minimum of Biosafety Level 1 practices.

Negative impact of laws regarding biosecurity and bioterrorism on real diseases.

Science.gov (United States)

Wurtz, N; Grobusch, M P; Raoult, D

2014-06-01

Research on highly pathogenic microorganisms in biosafety level 3 and 4 laboratories is very important for human public health, as it provides opportunities for the development of vaccines and novel therapeutics as well as diagnostic methods to prevent epidemics. However, in recent years, after the anthrax and World Trade Center attacks in 2001 in the USA, the threat of bioterrorism has grown for both the public and the authorities. As a result, technical and physical containment measures and biosafety and biosecurity practices have been implemented in laboratories handling these dangerous pathogens. Working with selected biological agents and toxins is now highly regulated, owing to their potential to pose a threat to public health and safety, despite the fact that the anthrax attack was found to be the result of a lack of security at a US Army laboratory. Thus, these added regulations have been associated with a large amount of fruitless investment. Herein, we describe the limitations of research in these facilities, and the multiple consequences of the increased regulations. These limitations have seriously negatively impacted on the number of collaborations, the size of research projects, and, more generally, scientific research on microbial pathogens. Clearly, the actual number of known victims and fatalities caused by the intentional use of microorganisms has been negligible as compared with those caused by naturally acquired human infections. © 2014 The Authors Clinical Microbiology and Infection © 2014 European Society of Clinical Microbiology and Infectious Diseases.

40 CFR 725.235 - Conditions of exemption for activities conducted inside a structure.

Science.gov (United States)

2010-07-01

... experiments subject to Institutional Biosafety Committee review, or notification simultaneous with initiation of the experiment, the information submitted for review or notification, along with standard... experiments exempt from Institutional Biosafety Committee review or notification simultaneous with initiation...

Igloo containment system for improvised explosive devices

International Nuclear Information System (INIS)

Dyckes, G.W.

1980-09-01

A method for containing or partially containing the blast and dispersal of radioactive particulate from improvised explosive devices is described. The containment system is restricted to devices located in fairly open areas at ground level, e.g., devices concealed in trucks, vans, transportainers, or small buildings which are accessible from all sides

Modelling global container freight transport demand

NARCIS (Netherlands)

Tavasszy, L.A.; Ivanova, O.; Halim, R.A.

2015-01-01

The objective of this chapter is to discuss methods and techniques for a quantitative and descriptive analysis of future container transport demand at a global level. Information on future container transport flows is useful for various purposes. It is instrumental for the assessment of returns of

Thermoelectric cooling container for medical applications

Energy Technology Data Exchange (ETDEWEB)

Aivazov, A A; Shtern, Y I; Budaguan, B G; Makhrachev, K B; Pastor, M

1997-07-01

In this work the thermoelectric cooling container for storing and transportation of the medicine, particularly for insulin, is discussed. In the working volume the temperature is supported on the level of +4 C. The container can work in two operating conditions: with the power supply and without the power supply. Two removable blocks are used for this purpose. One block (thermoelectric) is used for the work with the power supply and another (passive)-for the work without power supply. The thermoelectric block has a 12V power supply, which is used in the automobiles, yachts and other kinds of transport. The temperature in the working volume is supported by the use of the Peltier effect. An electronic device is used in this block and stabilizes temperature on the level of +4 C and indicates information about working conditions. The thermoelectric container has a power supply block for work at 220(110)V. The working temperature in the container can be maintained in the absence of the power supply. In this case the necessary temperature conditions are supported by melting of the crystallized salt. For this purpose the container has a hermetic volume containing this salt and contacting with the working volume.

Vitrification of high level nuclear waste inside ambient temperature disposal containers using inductive heating: The SMILE system

International Nuclear Information System (INIS)

Powell, J.; Reich, M.; Barletta, R.

1996-01-01

A new approach, termed SMILE (Small Module Inductively Loaded Energy), for the vitrification of high level nuclear wastes (HLW) is described. Present vitrification systems liquefy the HLW solids and associated frit material in large high temperature melters. The molten mix is then poured into small (∼1 m 3 ) disposal canisters, where it solidifies and cools. SMILE eliminates the separate, large high temperature melter. Instead, the BLW solids and frit melt inside the final disposal containers, using inductive heating. The contents then solidify and cool in place. The SMILE modules and the inductive heating process are designed so that the outer stainless can of the module remains at near ambient temperature during the process cycle. Module dimensions are similar to those of present disposal containers. The can is thermally insulated from the high temperature inner container by a thin layer of refractory alumina firebricks. The inner container is a graphite crucible lined with a dense alumina refractory that holds the HLW and fiit materials. After the SMILE module is loaded with a slurry of HLW and frit solids, an external multi-turn coil is energized with 30-cycle AC current. The enclosing external coil is the primary of a power transformer, with the graphite crucible acting as a single turn ''secondary.'' The induced current in the ''secondary'' heats the graphite, which in turn heats the HLW and frit materials. The first stage of the heating process is carried out at an intermediate temperature to drive off remnant liquid water and water of hydration, which takes about 1 day. The small fill/vent tube to the module is then sealed off and the interior temperature raised to the vitrification range, i.e., ∼1200C. Liquefaction is complete after approximately 1 day. The inductive heating then ceases and the module slowly loses heat to the environment, allowing the molten material to solidify and cool down to ambient temperature

Containment vessel construction for nuclear power reactors

International Nuclear Information System (INIS)

Sulzer, H.D.; Coletti, J.L.

1975-01-01

A nuclear containment vessel houses an inner reactor housing structure whose outer wall is closely spaced from the inner wall of the containment vessel. The inner reactor housing structure is divided by an intermediate floor providing an upper chamber for housing the reactor and associated steam generators and a lower chamber directly therebeneath containing a pressure suppression pool. Communication between the upper chamber and the pressure suppression pool is established by conduits extending through the intermediate floor which terminate beneath the level of the pressure suppression pool and by inlet openings in the reactor housing wall beneath the level of the pressure suppression pool which communicate with the annulus formed between the outer wall of the reactor housing structure and the inner wall of the containment vessel. (Official Gazette)

Corrosion on reinforced concrete structures. An application for the intermediate level radioactive waste container

International Nuclear Information System (INIS)

Arva, Alejandro; Alvarez, Marta G.; Duffo, Gustavo S.

2003-01-01

The behavior of steel reinforcement bars (rebars) for a high performance reinforced concrete made of sulfate resistant portland cement was evaluated from the rebars corrosion point of view. The results from the present work will be used to evaluate the materials properties to be used in the construction of the intermediate level radioactive waste disposal containers. The study is carried out evaluating the incidence of chloride and sulfate ions, as well as, concrete carbonation in the rebar corrosion process. The electrochemical parameters that characterize the corrosion process (corrosion potential [E corr ], polarisation resistance [Rp] and concrete electrical resistivity [ρ]) were monitored on specially designed reinforced concrete specimens. The results up to date (about 1000 days of exposure) reveal that the concrete under study provides to the steel reinforcement bars of a passive state against corrosion under the test conditions. An increasing tendency as a function of time of ρ is observed that corroborates the continuous curing process of concrete. The chloride and carbonation diffusion coefficients were also determined, and their values are comparable with those of high quality concrete. (author)

Fatty acid profile in meat of culling ewes in different feedlot periods fed diets containing levels of inclusion of linseed

Directory of Open Access Journals (Sweden)

Ana Claudia Radis

2016-09-01

Full Text Available Linseed plays an important role in animal nutrition as it contains long-chain fatty acids in its composition, which, once absorbed, are incorporated into meat and milk. For evaluate the concentration of fatty acids in the Longissimus dorsi muscle of culling ewes fed diets containing levels of inclusion of linseed, 88 culling ewes were used with an average initial body weight of 37.65 ± 6.98 kg were distributed in a completely randomized design with 12 treatments. Treatments consisted of the interaction between levels of linseed (0, 5, 10, and 15% and days in feedlot (30, 45, and 60. The most present fatty acids in the composition of the muscle L. dorsi were palmitic (27.32 g 100 g-1 and stearic (17.77 g 100 g-1. Saturated acids remained at low levels as the animals were fed greater levels of linseed, demonstrating the importance of introducing quality foods in animal feeding. Oleic acid was the most present monounsaturated fatty acid, with 40 g 100 g-1. Palmitoleic and elaidic fatty acids increased linearly as the linseed inclusion in the diet was increased. Polyunsaturated acids increased with the presence of linseed in the diet. For the linolenic acid (C18: 3n3, the best result was with inclusion of 10% of linseed in the total diet. All groups of animals that received linseed obtained better n6:n3 ratios, which varied from 1.81 to 4.14. The higher CLA values obtained in this study are related to the higher amounts of inclusion of linseed in the sheep diet, varying from 1.15 to 5.72 g 100 g-1. It is recommended culling ewes supplemented with inclusion of 10% linseed, for 60 days in feedlot, because they comprise a larger number of favorable traits regarding to the profile fatty acids of Longissimus dorsi.

Isolation of Campylobacter spp and Escherichia coli 0157: H7 from ...

African Journals Online (AJOL)

Objectives: To determine the biosafety of a free range indigenous chicken value chain with reference to zoonotic bacteria, Campylobacter spp and Escherichia coli 0157: H7. Design: cross-sectional sampling of chickens and chicken meat carcasses at farm and market level. Setting: Makueni and Nairobi Counties. Subjects: ...

77 FR 6971 - Establishment of User Fees for Filovirus Testing of Nonhuman Primate Liver Samples

Science.gov (United States)

2012-02-10

... Director on March 15, 1990, that they must comply with specific isolation and quarantine standards under 42... biosafety level 4 laboratory (BSL-4). A BSL-4 laboratory is also required during part of the testing... and supervisory costs; and the costs of enforcement, collection, research, establishment of standards...

Polymeric radioactive waste disposal containers: an investigation into the application of polymers vice metals to house low and intermediate level radioactive waste

International Nuclear Information System (INIS)

Walker, M.W.; Bonin, H.W.; Bui, V.T.

2001-01-01

The research carried out in Canada in the design of containers for the disposal of radioactive waste has focussed on spent nuclear fuel, even though the quantities of other currently stored radioactive wastes are substantially greater. Research carried out at the Royal Military College of Canada on the effects of mixed fields of radiation on high polymer adhesives and composite materials has shown that some polymers are quite resistant to radiation and could well serve in the fabrication of radioactive waste disposal containers. The purpose of this research was to determine if thermoplastic polymers could be used as superior materials to replace metals in the application of low and intermediate level radioactive waste disposal containers. Polymers have the advantage that they do not corrode like metals. The experimental methods, used in this research, focused on the effects of radiation on the properties of the materials. Polypropylene, Nylon 66, Polycarbonate, and Polyurethane, with and without glass fibre reinforcement, were studied. The method involved irradiating injection moulded tensile test bars with the SLOWPOKE-2 reactor to accumulate doses ranging from 0.5 to 3.0 MGy. To determine the effects of the various doses on the materials, density, tensile, differential scanning calorimetry, and scanning electron microscopy tests were run. For each polymer, the test methods supported predominant crosslinking of polymeric chains severed by radiation. This was evident from observed changes in the mechanical and chemical properties of the polymers, typical of crosslinking. The mechanical changes included an overall increase in density, an increase in Young's modulus, a decrease in strain at break, and only minor changes in strength. The chemical changes included differences in chemical transition temperatures characteristic of radiation damage. The test methods also evidenced minor radiation degradation at the fibre/matrix interfaces in the glass fibre reinforced

[Establishment of Quality Control System of Nucleic Acid Detection for Ebola Virus in Sierra Leone-China Friendship Biological Safety Laboratory].

Science.gov (United States)

Wang, Qin; Zhang, Yong; Nie, Kai; Wang, Huanyu; Du, Haijun; Song, Jingdong; Xiao, Kang; Lei, Wenwen; Guo, Jianqiang; Wei, Hejiang; Cai, Kun; Wang, Yanhai; Wu, Jiang; Gerald, Bangura; Kamara, Idrissa Laybohr; Liang, Mifang; Wu, Guizhen; Dong, Xiaoping

2016-03-01

The quality control process throughout the Ebola virus nucleic acid detection in Sierra Leone-China Friendship Biological Safety Laboratory (SLE-CHN Biosafety Lab) was described in detail, in order to comprehensively display the scientific, rigorous, accurate and efficient practice in detection of Ebola virus of first batch detection team in SLE-CHN Biosafety Lab. Firstly, the key points of laboratory quality control system was described, including the managements and organizing, quality control documents and information management, instrument, reagents and supplies, assessment, facilities design and space allocation, laboratory maintenance and biosecurity. Secondly, the application of quality control methods in the whole process of the Ebola virus detection, including before the test, during the test and after the test, was analyzed. The excellent and professional laboratory staffs, the implementation of humanized management are the cornerstone of the success; High-level biological safety protection is the premise for effective quality control and completion of Ebola virus detection tasks. And professional logistics is prerequisite for launching the laboratory diagnosis of Ebola virus. The establishment and running of SLE-CHN Biosafety Lab has landmark significance for the friendship between Sierra Leone and China, and the lab becomes the most important base for Ebola virus laboratory testing in Sierra Leone.

Mechanical properties of ductile cast iron and cast steel for intermediate level waste transport containers

International Nuclear Information System (INIS)

Gray, I.L.S.; Sievwright, R.W.T.; Egid, B.; Ajayi, F.; Donelan, P.

1994-01-01

UK Nirex Ltd is developing Type B re-usable shielded transport containers (RSTCs) in a range of shielding thicknesses to transport intermediate level radioactive waste (ILW) to a deep repository. The designs are of an essentially monolithic construction and rely principally on the plastic flow of their material to absorb the energies involved in impact events. Nirex has investigated the feasibility of manufacturing the RSTCs from ductile cast iron (DCI) or cast steel instead of from forgings, since this would bring advantages of reduced manufacturing time and costs. However, cast materials are perceived to lack toughness and ductility and it is necessary to show that sufficient fracture toughness can be obtained to preclude brittle failure modes, particularly at low temperatures. The mechanical testing carried out as part of that programme is described. It shows how the measured properties have been used to demonstrate avoidance of brittle fracture and provide input to computer modelling of the drop tests. (author)

Biorisk Assessment of Medical Diagnostic Laboratories in Nigeria

Directory of Open Access Journals (Sweden)

Bankole Henry Oladeinde

2013-06-01

Conclusion: In all laboratories (public and private surveyed, marked deficiencies were observed in the area of administrative control responsible for implementing biosafety. Increased emphasis on provision of biosafety devices and compliance with standard codes of practices issued by relevant authorities is strongly advocated.

78 FR 22552 - Agency Forms Undergoing Paperwork Reduction Act Review

Science.gov (United States)

2013-04-16

... Form with a Participant Biosafety Compliance Letter of Agreement; (c) revision of the Pre-shipment... the development of practice standards. Participants in this program include domestic clinical and... response (in respondent hours) Domestic Laboratory Participant Biosafety 93 2 5/60 Compliance Letter of...

The current status of the debate on socio-economic regulatory assessments: positions and policies in Canada, the USA, the EU and developing countries

NARCIS (Netherlands)

Falck-Zepeda, J.; Wesseler, J.H.H.; Smyth, S.

2013-01-01

Article 26.1 of the Cartagena Protocol on Biosafety has the option of considering socio-economic issues in biosafety regulatory approval processes related to genetically engineered organisms. National laws and regulations in some countries have already defined positions and may have enacted policies

The effects of four hypocaloric diets containing different levels of sucrose or high fructose corn syrup on weight loss and related parameters

Science.gov (United States)

2012-01-01

Background The replacement of sucrose with HFCS in food products has been suggested as playing a role in the development of obesity as a public health issue. The objective of this study was to examine the effects of four equally hypocaloric diets containing different levels of sucrose or high fructose corn syrup (HFCS). Methods This was a randomized, prospective, double blind trial, with overweight/obese participants measured for body composition and blood chemistry before and after the completion of 12 weeks following a hypocaloric diet. The average caloric deficit achieved on the hypocaloric diets was 309 kcal. Results Reductions were observed in all measures of adiposity including body mass, BMI,% body fat, waist circumference and fat mass for all four hypocaloric groups, as well as reductions in the exercise only group for body mass, BMI and waist circumference. Conclusions Similar decreases in weight and indices of adiposity are observed when overweight or obese individuals are fed hypocaloric diets containing levels of sucrose or high fructose corn syrup typically consumed by adults in the United States. PMID:22866961

The effects of four hypocaloric diets containing different levels of sucrose or high fructose corn syrup on weight loss and related parameters

Directory of Open Access Journals (Sweden)

Lowndes Joshua

2012-08-01

Full Text Available Abstract Background The replacement of sucrose with HFCS in food products has been suggested as playing a role in the development of obesity as a public health issue. The objective of this study was to examine the effects of four equally hypocaloric diets containing different levels of sucrose or high fructose corn syrup (HFCS. Methods This was a randomized, prospective, double blind trial, with overweight/obese participants measured for body composition and blood chemistry before and after the completion of 12 weeks following a hypocaloric diet. The average caloric deficit achieved on the hypocaloric diets was 309 kcal. Results Reductions were observed in all measures of adiposity including body mass, BMI,% body fat, waist circumference and fat mass for all four hypocaloric groups, as well as reductions in the exercise only group for body mass, BMI and waist circumference. Conclusions Similar decreases in weight and indices of adiposity are observed when overweight or obese individuals are fed hypocaloric diets containing levels of sucrose or high fructose corn syrup typically consumed by adults in the United States.

The effects of four hypocaloric diets containing different levels of sucrose or high fructose corn syrup on weight loss and related parameters.

Science.gov (United States)

Lowndes, Joshua; Kawiecki, Diana; Pardo, Sabrina; Nguyen, Von; Melanson, Kathleen J; Yu, Zhiping; Rippe, James M

2012-08-06

The replacement of sucrose with HFCS in food products has been suggested as playing a role in the development of obesity as a public health issue. The objective of this study was to examine the effects of four equally hypocaloric diets containing different levels of sucrose or high fructose corn syrup (HFCS). This was a randomized, prospective, double blind trial, with overweight/obese participants measured for body composition and blood chemistry before and after the completion of 12 weeks following a hypocaloric diet. The average caloric deficit achieved on the hypocaloric diets was 309 kcal. Reductions were observed in all measures of adiposity including body mass, BMI,% body fat, waist circumference and fat mass for all four hypocaloric groups, as well as reductions in the exercise only group for body mass, BMI and waist circumference. Similar decreases in weight and indices of adiposity are observed when overweight or obese individuals are fed hypocaloric diets containing levels of sucrose or high fructose corn syrup typically consumed by adults in the United States.

Shade periodicity affects growth of container grown dogwoods

Science.gov (United States)

Container-grown dogwoods rank third in the US in nursery sales of ornamental trees. However, Dogwoods are a challenging crop to produce in container culture, especially when bare root liners are used as the initial transplant into containers due unacceptable levels of mortality and poor growth. This...

Evaluation of the Impact That PARs Have on the Hydrogen Risk in the Reactor Containment: Methodology and Application to PSA Level 2

Directory of Open Access Journals (Sweden)

Ahmed Bentaib

2010-01-01

Full Text Available This paper presents a methodology and its application to a Level 2 Probabilistic Safety Assessment (PSA-2, to evaluate the impact of the Passive Autocatalytic Recombiners (PARs on the hydrogen risk in the reactor containment in case of a severe accident. Among the whole set of accidental scenarios calculated in the framework of the PSA-2, nine have been selected as representative in terms of the in-vessel hydrogen production rate and in-vessel total produced hydrogen mass. Five complementary scenarios have been added as representative of the core reflooding situations. For this set of selected scenarios the evolution of the conditions in the containment (i.e., pressure, temperature, and composition during the in-vessel phase of the accident has been evaluated by means of a lumped parameter approach. The use of spray systems in the containment has also been considered as well as the presence of recombiners. Moreover, the ignition by recombiners of the flammable atmosphere has been considered.

Discovery of Host Factors and Pathways Utilized in Hantaviral Infection

Science.gov (United States)

2016-09-01

Unclassified 19 19b. TELEPHONE NUMBER (include area code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 W81XWH-14-1-0204 1...glycoproteins but are safer and can therefore be handled in lower biosafety levels. Although we developed them to facilitate genetic screening, these

76 FR 17617 - Multi-Agency Informational Meeting Concerning Compliance With the Federal Select Agent Program...

Science.gov (United States)

2011-03-30

... assessments, biosafety requirements, and security measures. DATES: The meeting will be held on May 10, 2011...) and other interested individuals to obtain specific regulatory guidance and information on standards concerning biosafety and biosecurity issues related to the Federal Select Agent Program. CDC, APHIS, and FBI...

Activation of functional α7-containing nAChRs in hippocampal CA1 pyramidal neurons by physiological levels of choline in the presence of PNU-120596.

Directory of Open Access Journals (Sweden)

Bopanna I Kalappa

2010-11-01

Full Text Available The level of expression of functional α7-containing nicotinic acetylcholine receptors (nAChRs in hippocampal CA1 pyramidal neurons is believed to be very low compared to hippocampal CA1 interneurons, and for many years this expression was largely overlooked. However, high densities of expression of functional α7-containing nAChRs in CA1 pyramidal neurons may not be necessary for triggering important cellular and network functions, especially if activation of α7-containing nAChRs occurs in the presence of positive allosteric modulators such as PNU-120596.An approach previously developed for α7-containing nAChRs expressed in tuberomammillary neurons was applied to investigate functional CA1 pyramidal α7-containing nAChRs using rat coronal hippocampal slices and patch-clamp electrophysiology. The majority (∼71% of tested CA1 pyramidal neurons expressed low densities of functional α7-containing nAChRs as evidenced by small whole-cell responses to choline, a selective endogenous agonist of α7 nAChRs. These responses were potentiated by PNU-120596, a novel positive allosteric modulator of α7 nAChRs. The density of functional α7-containing nAChRs expressed in CA1 pyramidal neurons (and thus, the normalized net effect of activation, i.e., response net charge per unit of membrane capacitance per unit of time was estimated to be ∼5% of the density observed in CA1 interneurons. The results of this study demonstrate that despite low levels of expression of functional pyramidal α7-containing nAChRs, physiological levels of choline (∼10 µM are sufficient to activate these receptors and transiently depolarize and even excite CA1 pyramidal neurons in the presence of PNU-120596. The observed effects are possible because in the presence of 10 µM choline and 1-5 µM PNU-120596, a single opening of an individual pyramidal α7-containing nAChR ion channel appears to transiently depolarize (∼4 mV the entire pyramidal neuron and occasionally

Effects of crystallization on thermal properties and chemical durability of the glasses containing simulated high level radioactive wastes

International Nuclear Information System (INIS)

Kawamoto, Takamichi; Terai, Ryohei; Hara, Shigeo

1978-01-01

In order to improve the thermodynamic stability of the glasses containing high level radioactive wastes, the conversion to glass-ceramics by the heat-treatment was carried out with two kinds of glasses, and the change of thermal properties and chemical durability by crystallization was investigated. One of the glasses has a composition of SiO 2 -Al 2 O 3 -ZnO-TiO 2 system, and another one has a composition which could grow the nephelite crystals from Na 2 O in wastes and Al 2 O 3 and SiO 2 added as glass-forming materials. Transition and yield points shifted to higher temperatures by the conversion and the glass-ceramics were found to be more stable than the original glasses. The glass-ceramics of the composition of SiO 2 -Al 2 O 3 -ZnO-TiO 2 showed poor durability, whereas the chemical durability of the glass-ceramics containing nephelite crystals was considerably improved. In the latter case, improvement of the durability is attributable to that some parts of glass are converted to nephelite crystals and the crystals are more durable than glass under most conditions. (auth.)

Nuclear reactor containing facility

International Nuclear Information System (INIS)

Hidaka, Masataka; Murase, Michio.

1994-01-01

In a reactor containing facility, a condensation means is disposed above the water level of a cooling water pool to condensate steams of the cooling water pool, and return the condensated water to the cooling water pool. Upon occurrence of a pipeline rupture accident, steams generated by after-heat of a reactor core are caused to flow into a bent tube, blown from the exit of the bent tube into a suppression pool and condensated in a suppression pool water, thereby suppressing the pressure in the reactor container. Cooling water in the cooling water pool is boiled by heat conduction due to the condensation of steams, then the steams are exhausted to the outside of the reactor container to remove the heat of the reactor container to the outside of the reactor. In addition, since cooling water is supplied to the cooling water pool quasi-permanently by gravity as a natural force, the reactor container can be cooled by the cooling water pool for a long period of time. Since the condensation means is constituted with a closed loop and interrupted from the outside, radioactive materials are never released to the outside. (N.H.)

Preparation of Orally Disintegrating Tablets Containing Powdered Tea Leaves with Enriched Levels of Bioactive Compounds by Means of Microwave Irradiation Technique.

Science.gov (United States)

Tanaka, Hironori; Iwao, Yasunori; Izumikawa, Masahiro; Sano, Syusuke; Ishida, Hitoshi; Noguchi, Shuji; Itai, Shigeru

2016-01-01

In the present study, a microwave treatment process has been applied to prepare orally disintegrating tablets (ODTs) containing powdered tea leaves with enriched levels of the anti-inflammatory compounds such as chafuroside A (CFA) and chafuroside B (CFB). The use of distilled water as the adsorbed and granulation solvents in this preparation process afforded tablets with a long disintegration time (more than 120 s). The CFA and CFB contents of these tablets did not also change after 4 min of microwave irradiation due to the tablet temperature, which only increased to 100°C. In contrast, the tablet temperature increased up to 140°C after 3 min of microwave irradiation when a 1.68 M Na2HPO4 solution instead of distilled water. Notably, the disintegration time of these tablets was considerably improved (less than 20 s) compared with the microwave-untreated tablets, and there were 7- and 11-fold increases in their CFA and CFB contents. In addition, the operational conditions for the preparation of the tablets were optimized by face-centered composite design based on the following criteria: tablet hardness greater than 13 N, disintegration time less than 30 s and friability less than 0.5%. The requirements translated into X1 (the amount of granulation solvent), X2 (tableting pressure) and X3 (content of the powdered tea leaves) values of 45%, 0.43 kN and 32%, respectively, and the ODTs containing powdered tea leaves prepared under these optimized conditions were found to show excellent tablet properties and contain enriched levels of CFA and CFB.

Development of a pyro-partitioning process for long-lived radioactive nuclides. Process test for pretreatment of simulated high-level waste containing uranium

International Nuclear Information System (INIS)

Kurata, Masateru; Hijikata, Takatoshi; Kinoshita, Kensuke; Inoue, Tadashi

2000-01-01

A pyro-partitioning process developed at CRIEPI requires a pre-treatment process to convert high-level liquid waste to chloride. A combination process of denitration and chlorination has been developed for this purpose. Continuous process tests using simulated high-level waste were performed to certify the applicability of the process. Test results indicated a successful material balance sufficient for satisfying pyro-partitioning process criteria. In the present study, process tests using simulated high-level waste containing uranium were also carried out to prove that the pre-treatment process is feasible for uranium. The results indicated that uranium can be converted to chloride appropriate for the pyro-partitioning process. The material balance obtained from the tests is to be used to revise the process flow diagram. (author)

Tiltmeter leveling mechanism

Science.gov (United States)

Hunter, Steven L.; Boro, Carl O.; Farris, Alvis

2002-01-01

A tiltmeter device having a pair of orthogonally disposed tilt sensors that are levelable within an inner housing containing the sensors. An outer housing can be rotated to level at least one of the sensor pair while the inner housing can be rotated to level the other sensor of the pair. The sensors are typically rotated up to about plus or minus 100 degrees. The device is effective for measuring tilts in a wide range of angles of inclination of wells and can be employed to level a platform containing a third sensor.

Biossegurança e a dimensão subjetiva do trabalho e do risco Biosafety and the subjective dimension of work and risk

Directory of Open Access Journals (Sweden)

Marli B. M. de Albuquerque Navarro

2009-01-01

Full Text Available O artigo discute as possibilidades do campo reflexivo que se abre para a biossegurança, utilizando como ponto de partida interpretações de análises que abordam o mundo do trabalho, considerando as relações entre labor e subjetividade. Enfoca a dinâmica do trabalho, valorizando a questão da subjetividade como elemento de possibilidade criativa e inovadora no mundo do trabalho, analisando a articulação entre o pensamento com várias habilidades, incluindo a precisão dos gestos, o engajamento do corpo, a mobilização da inteligência, a capacidade de refletir, de interpretar e de reagir às situações, apresentando a plenitude do sentir associado ao pensar, como estímulo ao processo de criar, de inventar, contexto onde podemos identificar plenamente a dinâmica da atividade laboratorial e sua relação com a construção e a superação dos contextos de risco.This paper discusses the possibilities of the reflective field that opens for biosafety, using as a starting point interpretations of analyses that address the world of work, considering the relationship between labor and subjectivity. It focuses on the work dynamics, highlighting the issue of subjectivity as creative and innovative opportunity in the world of work, examining the relation among thought with several skills, including the accuracy of gestures, the engagement of the body, the mobilization of intelligence, the ability to reflect, to interpret and to react to situations, with full feeling associated with thinking, stimulating the process of creation, invention, where we can fully identify the dynamics of laboratory activity and its relation with the construction and overcoming of risk contexts.

Agar Plates Made from Common Supermarket Substances and Bacillus subtilis Natto as an Inexpensive Approach to Microbiology Education

Directory of Open Access Journals (Sweden)

Franz-Josef Scharfenberg

2015-08-01

Full Text Available To address the possible limitations that financial restrictions may have on students’ independent experimentation at school, we developed and implemented an inexpensive approach for basic microbiology education. We describe four nutrient agars consisting only of everyday substances available from the supermarket or online that we developed to replace standard agars and specific agars. Additionally, we selected Bacillus subtilis natto as an example of a pure-culture species. Our tip first reports the four supermarket-substance agar variants; second, it suggests utilizing them to introduce basic microbiological techniques; and third, it introduces B. subtilis natto in the context of the antibacterial effects of antibiotics as well as of supermarket products which students can bring to class from home. We implemented our approach in microbiology education at school as well as in pre-service teacher education and in in-service teacher professional development courses at our university. Finally, our paper provides worksheets for all the experiments. Editor's Note:The ASM advocates that students must successfully demonstrate the ability to explain and practice safe laboratory techniques. For more information, read the laboratory safety section of the ASM Curriculum Recommendations: Introductory Course in Microbiology and the Guidelines for Biosafety in Teaching Laboratories, available at www.asm.org. The Editors of JMBE recommend that adopters of the protocols included in this article follow a minimum of Biosafety Level 1 practices. If the soil plates described in the activity are opened, a minimum of Biosafety Level 2 is required.

Survey of hepatitis B and C infection control: procedures at manicure and pedicure facilities in São Paulo, Brazil

Directory of Open Access Journals (Sweden)

Andréia Cristine Deneluz Schunck de Oliveira

Full Text Available Bleeding due to the habit of removing the cuticles of the finger and toes nails, without appropriate sterilization of instruments can be an important factor of contamination by hepatitis B and C viruses. The objectives of this study were to verify the use of standards on biosafety in the routine work of manicurists and/or pedicurists located in São Paulo, Brazil; know the level of information they have about ways of transmission and prevention of hepatitis B and C; evaluate the degree of risk perception for accidental exposure to infectious agents; and to estimate the prevalence of serological markers of hepatitis B and C among them. This was descriptive, cross-sectional study that included a random sample of 100 manicurists and/or pedicurists working in beauty salons. We administered a questionnaire to obtain personal information about the characteristics of the participants, collected blood for hepatitis B and C serology and assessed the working environment. Adherence to the professional standards on biosafety has been inadequate, and we noted that only 5% used disposable gloves, none washed their hands, 93% did not previously cleaned their working material and only 7% used disposable materials. A low level of knowledge about the routes of transmission, prevention, standards of biosafety, and risk perception of the infectious agents in their professional activity was observed. One out of ten interviewed manicurist and/or pedicurist had serological markers of hepatitis B or C, with 8% of hepatitis B and 2% of hepatitis C

42 CFR 73.15 - Training.

Science.gov (United States)

2010-10-01

... provide information and training on biosafety and security to each individual with access approval from... entity must provide information and training on biosafety and security to each individual not approved... provided under the OSHA Bloodborne Pathogen Standard set forth at 29 CFR 1910.1030. (b) Refresher training...

Localized corrosion and stress corrosion cracking of candidate materials for high-level radioactive waste disposal containers in U.S

International Nuclear Information System (INIS)

Farmer, J.C.; McCright, R.D.

1989-01-01

Three ion-based to nickel-based austenitic alloys and three copper-based alloys are being considered in the United States as candidate materials for the fabrication of high-level radioactive waste containers. The austenitic alloys are Types 304L and 316L stainless steels as well as the high-nickel material Alloy 825. The copper-based alloys are CDA 102 (oxygen-free copper) CDA 613 (Cu7Al), and CDA 715 (Cu-30Ni). Waste in the forms of spent fuel assemblies from reactors and borosilicate glass will be sent to a proposed repository at Yucca Mountain, Nevada. The decay of radionuclides will result in the generation of substantial heat and in gamma radiation. Container materials may undergo any of several modes of degradation in this environment, including: undesirable phase transformations due to a lack of phase stability; atmospheric oxidation; general aqueous corrosion; pitting; crevice corrosion; intergranular stress corrosion cracking (IGSCC); and transgranular stress corrosion cracking (TGSCC). This paper is an analysis of data from the literature relevant to the pitting, crevice corrosion, and stress corrosion cracking (SCC) of these alloys

Analyses of containment structures with corrosion damage

International Nuclear Information System (INIS)

Cherry, J.L.

1997-01-01

Corrosion damage that has been found in a number of nuclear power plant containment structures can degrade the pressure capacity of the vessel. This has prompted concerns regarding the capacity of corroded containments to withstand accident loadings. To address these concerns, finite element analyses have been performed for a typical PWR Ice Condenser containment structure. Using ABAQUS, the pressure capacity was calculated for a typical vessel with no corrosion damage. Multiple analyses were then performed with the location of the corrosion and the amount of corrosion varied in each analysis. Using a strain-based failure criterion, a open-quotes lower boundclose quotes, open-quotes best estimateclose quotes, and open-quotes upper boundclose quotes failure level was predicted for each case. These limits were established by: determining the amount of variability that exists in material properties of typical containments, estimating the amount of uncertainty associated with the level of modeling detail and modeling assumptions, and estimating the effect of corrosion on the material properties

Development of an elution device for ViroCap virus filters.

Science.gov (United States)

Fagnant, Christine Susan; Toles, Matthew; Zhou, Nicolette Angela; Powell, Jacob; Adolphsen, John; Guan, Yifei; Ockerman, Byron; Shirai, Jeffry Hiroshi; Boyle, David S; Novosselov, Igor; Meschke, John Scott

2017-10-19

Environmental surveillance of waterborne pathogens is vital for monitoring the spread of diseases, and electropositive filters are frequently used for sampling wastewater and wastewater-impacted surface water. Viruses adsorbed to electropositive filters require elution prior to detection or quantification. Elution is typically facilitated by a peristaltic pump, although this requires a significant startup cost and does not include biosafety or cross-contamination considerations. These factors may pose a barrier for low-resource laboratories that aim to conduct environmental surveillance of viruses. The objective of this study was to develop a biologically enclosed, manually powered, low-cost device for effectively eluting from electropositive ViroCap™ virus filters. The elution device described here utilizes a non-electric bilge pump, instead of an electric peristaltic pump or a positive pressure vessel. The elution device also fully encloses liquids and aerosols that could contain biological organisms, thereby increasing biosafety. Moreover, all elution device components that are used in the biosafety cabinet are autoclavable, reducing cross-contamination potential. This device reduces costs of materials while maintaining convenience in terms of size and weight. With this new device, there is little sample volume loss due to device inefficiency, similar virus yields were demonstrated during seeded studies with poliovirus type 1, and the time to elute filters is similar to that required with the peristaltic pump. The efforts described here resulted in a novel, low-cost, manually powered elution device that can facilitate environmental surveillance of pathogens through effective virus recovery from ViroCap filters while maintaining the potential for adaptability to other cartridge filters.

Polymeric radioactive waste disposal containers: an investigation into the application of polymers vice metals to house low and intermediate level radioactive waste

Energy Technology Data Exchange (ETDEWEB)

Walker, M.W.; Bonin, H.W.; Bui, V.T. [Royal Military College of Canada, Kingston, Ontario (Canada)

2001-07-01

The research carried out in Canada in the design of containers for the disposal of radioactive waste has focussed on spent nuclear fuel, even though the quantities of other currently stored radioactive wastes are substantially greater. Research carried out at the Royal Military College of Canada on the effects of mixed fields of radiation on high polymer adhesives and composite materials has shown that some polymers are quite resistant to radiation and could well serve in the fabrication of radioactive waste disposal containers. The purpose of this research was to determine if thermoplastic polymers could be used as superior materials to replace metals in the application of low and intermediate level radioactive waste disposal containers. Polymers have the advantage that they do not corrode like metals. The experimental methods, used in this research, focused on the effects of radiation on the properties of the materials. Polypropylene, Nylon 66, Polycarbonate, and Polyurethane, with and without glass fibre reinforcement, were studied. The method involved irradiating injection moulded tensile test bars with the SLOWPOKE-2 reactor to accumulate doses ranging from 0.5 to 3.0 MGy. To determine the effects of the various doses on the materials, density, tensile, differential scanning calorimetry, and scanning electron microscopy tests were run. For each polymer, the test methods supported predominant crosslinking of polymeric chains severed by radiation. This was evident from observed changes in the mechanical and chemical properties of the polymers, typical of crosslinking. The mechanical changes included an overall increase in density, an increase in Young's modulus, a decrease in strain at break, and only minor changes in strength. The chemical changes included differences in chemical transition temperatures characteristic of radiation damage. The test methods also evidenced minor radiation degradation at the fibre/matrix interfaces in the glass fibre

Protecting against failure by brittle fracture in ferritic steel shipping containers

International Nuclear Information System (INIS)

Schwartz, M.W.; Langland, R.T.

1983-01-01

The possible use of ferritic steels for the containment structure of shipping casks has motivated the development of criteria for assuring the integrity of these casks under both normal and hypothetical accident conditions specified in Part 71 of the Code of Federal Regulations. The US Nuclear Regulatory Commission Regulation Guide 7.6 provides design criteria for preventing ductile failure steel shipping containers. The research described in this paper deals with criteria for preventing brittle fracture of ferritic steel shipping containers. Initially guidelines were developed for ferritic steel up to four inches thick (I). This was followed by an investigation of various criteria that might be used for monolithic thick walled casks greater than four inches thick (2). Three categories of safety are identified in the design of shipping containers. Category I, the highest level of safety, is appropriate for containment systems for spent nuclear fuel and high level waste transport packaging. In Category I, containers are designed to the highest level of safety and brittle fracture is essentially not possible. Categories II and III represent levels of safety commensurate with the consequences of release of lower levels of radioactivity. In these latter categories, consideration of factors contributing to brittle fracture, good engineering practice, and careful selection of material make brittle fracture unlikely under environmental conditions encountered during shipping. This paper will deal primarily with Category I containers. The guidelines for Category II and III containers are fully described elsewhere. 5 references, 10 figures, 3 tables

The Treatment of Low Level Radioactive Liquid Waste Containing Detergent by Biological Activated Sludge Process

International Nuclear Information System (INIS)

Zainus Salimin

2002-01-01

The treatment of low level radioactive liquid waste containing persil detergent from laundry operation of contaminated clothes by activated sludge process has been done, for alternative process replacing the existing treatment by evaporation. The detergent concentration in water solution from laundry operation is 14.96 g/l. After rinsing operation of clothes and mixing of laundry water solution with another liquid waste, the waste water solution contains about ≤ 1.496 g/l of detergent and 10 -3 Ci/m 3 of Cs-137 activity. The simulation waste having equivalent activity of Cs-137 10 -3 Ci/m 3 , detergent content (X) 1.496, 0.748, 0.374, 0.187, 0.1496 and 0.094 g/l on BOD value respectively 186, 115, 71, 48, 19, and 16 ppm was processed by activated sludge in reactor of 18.6 l capacity on ambient temperature. It is used Super Growth Bacteria (SGB) 102 and SGB 104, nitrogen and phosphor nutrition, and aeration. The result show that bacteria of SGB 102 and SGB 104 were able to degrade the persil detergent for attaining standard quality of water release category B in which BOD values 6 ppm. It was need 30 hours for X ≤ 0.187 g/l, 50 hours for 0.187 < X ≤ 0.374 g/l, 75 hours for 0.374 < X ≤ 0.748, and 100 hours for 0.748 < X ≤ 1.496 g/l. On the initial period the bacteria of SGB 104 interact most quickly to degrade the detergent comparing SGB 102. Biochemical oxidation process decontaminate the solution on the decontamination factor of 350, Cs-137 be concentrate in sludge by complexing with the bacteria wall until the activity of solution be become very low. (author)

42 CFR 9.9 - Facility staffing.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Facility staffing. 9.9 Section 9.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS STANDARDS OF CARE FOR... Biosafety Officer must have experience in developing and monitoring biohazards and dealing with biosafety...

Growth performance of native goats fed diets containing different levels of energy

Directory of Open Access Journals (Sweden)

Lígia Maria Gomes Barreto

2012-03-01

Full Text Available Castrated male goats (n = 40 of the Moxotó (n = 20 and Canindé (n = 20 breeds with an average weight of 15.3 kg were studied to determine intake, nutrient digestibility and weight gain for two diets with different energy levels. The experiment utilized a 2 × 2 factorial arrangement (two breeds and two diets, in which goats were randomly allocated. A diet of low energy density and a forage:concentrate ratio of 70:30 was utilized along with a diet of high energy density and a forage:concentrate ratio of 35:64. To determine the nutrient intake and digestibility, at the end of the experiment, goats were kept in metabolism cages for a period of 15 days. Weighing of the goats was conducted weekly over a period of 90 days. The goats that were fed a diet of high energy density displayed significantly increased consumption of metabolic fractions, with the exception of dry matter and neutral detergent fiber, when compared with those fed a diet of low energy density. The lack of difference in dry matter and neutral detergent fiber intake indicated that goats have a high digestive capacity for the diet containing a greater quantity of Maniçoba hay. Weight gain was significantly greater for those on the diet of greater energy density. Among the breeds, Canindé goats recorded the highest average consumption and weight gain. Coefficients of digestibility were significantly greater for the more energy dense diet, with no difference between breeds. Regardless of diet, the Canindé breed shows greater weight gain than the Moxotó breed.

Innovative farmers and regulatory gatekeepers: Genetically modified crops regulation and adoption in developing countries.

Science.gov (United States)

Sinebo, Woldeyesus; Maredia, Karim

2016-01-02

The regulation of genetically modified (GM) crops is a topical issue in agriculture and environment over the past 2 decades. The objective of this paper is to recount regulatory and adoption practices in some developing countries that have successfully adopted GM crops so that aspiring countries may draw useful lessons and best practices for their biosafatey regulatory regimes. The first 11 mega-GM crops growing countries each with an area of more than one million hectares in 2014 were examined. Only five out of the 11 countries had smooth and orderly adoption of these crops as per the regulatory requirement of each country. In the remaining 6 countries (all developing countries), GM crops were either introduced across borders without official authorization, released prior to regulatory approval or unapproved seeds were sold along with the approved ones in violation to the existing regulations. Rapid expansion of transgenic crops over the past 2 decades in the developing world was a result of an intense desire by farmers to adopt these crops irrespective of regulatory roadblocks. Lack of workable biosafety regulatory system and political will to support GM crops encouraged unauthorized access to GM crop varieties. In certain cases, unregulated access in turn appeared to result in the adoption of substandard or spurious technology which undermined performance and productivity. An optimal interaction among the national agricultural innovation systems, biosafety regulatory bodies, biotech companies and high level policy makers is vital in making a workable regulated progress in the adoption of GM crops. Factoring forgone opportunities to farmers to benefit from GM crops arising from overregulation into biosafety risk analysis and decision making is suggested. Building functional biosafety regulatory systems that balances the needs of farmers to access and utilize the GM technology with the regulatory imperatives to ensure adequate safety to the environment and human

GMOMETHODS: the European Union database of reference methods for GMO analysis.

Science.gov (United States)

Bonfini, Laura; Van den Bulcke, Marc H; Mazzara, Marco; Ben, Enrico; Patak, Alexandre

2012-01-01

In order to provide reliable and harmonized information on methods for GMO (genetically modified organism) analysis we have published a database called "GMOMETHODS" that supplies information on PCR assays validated according to the principles and requirements of ISO 5725 and/or the International Union of Pure and Applied Chemistry protocol. In addition, the database contains methods that have been verified by the European Union Reference Laboratory for Genetically Modified Food and Feed in the context of compliance with an European Union legislative act. The web application provides search capabilities to retrieve primers and probes sequence information on the available methods. It further supplies core data required by analytical labs to carry out GM tests and comprises information on the applied reference material and plasmid standards. The GMOMETHODS database currently contains 118 different PCR methods allowing identification of 51 single GM events and 18 taxon-specific genes in a sample. It also provides screening assays for detection of eight different genetic elements commonly used for the development of GMOs. The application is referred to by the Biosafety Clearing House, a global mechanism set up by the Cartagena Protocol on Biosafety to facilitate the exchange of information on Living Modified Organisms. The publication of the GMOMETHODS database can be considered an important step toward worldwide standardization and harmonization in GMO analysis.

Optimization of Paclitaxel Containing pH-Sensitive Liposomes By 3 Factor, 3 Level Box-Behnken Design.

Science.gov (United States)

Rane, Smita; Prabhakar, Bala

2013-07-01

The aim of this study was to investigate the combined influence of 3 independent variables in the preparation of paclitaxel containing pH-sensitive liposomes. A 3 factor, 3 levels Box-Behnken design was used to derive a second order polynomial equation and construct contour plots to predict responses. The independent variables selected were molar ratio phosphatidylcholine:diolylphosphatidylethanolamine (X1), molar concentration of cholesterylhemisuccinate (X2), and amount of drug (X3). Fifteen batches were prepared by thin film hydration method and evaluated for percent drug entrapment, vesicle size, and pH sensitivity. The transformed values of the independent variables and the percent drug entrapment were subjected to multiple regression to establish full model second order polynomial equation. F was calculated to confirm the omission of insignificant terms from the full model equation to derive a reduced model polynomial equation to predict the dependent variables. Contour plots were constructed to show the effects of X1, X2, and X3 on the percent drug entrapment. A model was validated for accurate prediction of the percent drug entrapment by performing checkpoint analysis. The computer optimization process and contour plots predicted the levels of independent variables X1, X2, and X3 (0.99, -0.06, 0, respectively), for maximized response of percent drug entrapment with constraints on vesicle size and pH sensitivity.

Containment structure tendon investigation

International Nuclear Information System (INIS)

Fulton, J.F.; Murray, K.H.

1983-01-01

The paper describes an investigation into the possible causes of lower-than-predicted tendon forces which were measured during past tendon surveillances for a concrete containment. The containment is post tensioned by vertical tendons which are anchored into a rock foundation. The tendons were originally stressed in 1969, and lift-off tests were performed on six occasions subsequent to this date over a period of 11 years. The tendon forces measured in these tests were generally lower than predicted, and by 1979 the prestress level in the containment was only marginally above the design requirement. The tendons were retensioned in 1980, and by this time an investigation into the possible causes was underway. Potential causes investigated include the rock anchors and surrounding rock, elastomeric pad creep, wire stresses, thermal effects, stressing equipment and lift-off procedures, and wire stress relaxation. The investigation activities included stress relaxation testing of wires pulled from actual tendons. The stress relaxation test program included wire specimens at several different temperature and initial stress levels and the effect of a varying temperature history on the stress relaxation property of the wires. For purpose of future force predictions of the retensioned tendons, the test program included tests to determine the effect on stress relaxation due to restressing the wires after they had relaxed for 1000 hours and 10,000 hours. (orig./GL)

Passive heat removal from containment

International Nuclear Information System (INIS)

Gou, P.F.; Townsend, H.E.

1990-01-01

This patent describes a heat removal system for removing heat from a containment of a nuclear reactor. It comprises: a sealed suppression chamber in the containment; means for venting steam from the nuclear reactor into the suppression chamber upon occurrence of an event requiring dissipation of heat from the nuclear reactor. The suppression chamber containing a quantity of water; the suppression chamber having a gas-containing space above the water; a heat exchanger disposed within the gas-containing space of the suppression chamber; the heat exchanger including an enclosed structure for holding a heat-exchange fluid; means for metering a supply of heat-exchange fluid to the heat exchanger to maintain a predetermined level thereof in the enclosed structure. The heat-exchange fluid boiling in the heat exchanger in consequence of heat transfer thereto from steam present in the suppression chamber; means for separating a heat-exchange fluid vapor in the heat exchanger from the heat-exchange fluid; and means for discharging the vapor immediately following its separation from heat-exchange fluid directly from the heat exchanger to a location exterior of the containment, whereby heat is discharged from the suppression chamber, and the containment is maintained at a temperature and pressure below its design value

EVALUACIÓN DE LA IMPORTANCIA DE LA PRÁCTICA DE BIOSEGURIDAD EN PROGRAMAS DE PREGRADO Y POSGRADO EN LA UNIVERSIDAD FEDERAL DE RIO DE JANEIRO Y OTRAS UNIVERSIDADES BRASILEÑAS

Directory of Open Access Journals (Sweden)

Roberta Busnardo

2013-01-01

Full Text Available This study aimed to investigate aspects related to biosafety, in an academic context, in Brazilian universities. Biosecurity is directly related to the control and minimization of risks, which must be considered by the students in the laboratory practices. The methodology applied involved a search for specific web sites giving an overview of biosafety in Brazilian undergraduate and postgraduate. As a conclusion of the work, it was noticed the absence of biosafety issues in the curricula of undergraduate and postgraduate; these mostly lie in the area of law that owed legislation, it is one of the first points when the topic studied is underexplored.

77 FR 7109 - Establishment of User Fees for Filovirus Testing of Nonhuman Primate Liver Samples

Science.gov (United States)

2012-02-10

... quarantine standards under 42 CFR part 71 for continued registration as an importer of NHPs (2). On March 23... reagents requires a biosafety level 4 laboratory (BSL-4). A BSL- 4 laboratory is also required during part..., establishment of standards, and regulation. Full costs are determined based on the best available records of the...

Author: OJ Lim Tung TRANSBOUNDARY MOVEMENTS OF ...

African Journals Online (AJOL)

10332324

commodities from the advance informed agreement (AIA) procedure and a saving clause so that the biosafety protocol would not undermine the application of trade agreements. The European. Union (EU) was in ... of the world and regional instruments20 use the term "GMOs" and their biosafety frameworks cover not only ...

A non-commercial approach for the generation of transgenic Leishmania tarentolae and its application in antileishmanial drug discovery.

Science.gov (United States)

Pineda, Tatiana; Valencia, Yesenia; Flórez, María F; Pulido, Sergio A; Vélez, Iván D; Robledo, Sara M

2016-08-01

Leishmaniasis is a parasitic infection caused by several species of the genus Leishmania that is considered as a neglected disease. Drug development process requires a robust and updated high-throughput technology to the evaluation of candidate compounds that imply the manipulation of the pathogenic species of the parasite in the laboratory. Therefore, it is restricted to trained personal and level II biosafety environments. However, it has been established the utility of Leishmania tarentolae as a model for in vitro screening of antileishmanial agents without the necessity of level II biosafety setups. In parallel the transfection of Leishmania parasites with reporter genes as the eGFP using non-commercial integration vectors like the pIRmcs3(-) has proved to be a powerful tool for the implementation of semi automatized high-throughput platforms for the evaluation of antileishmanial compounds. Here we report the generation of a new L. tarentolae strain overexpressing the eGFP gene harboured by the non-commercial vector pIR3(-). We also demonstrate its utility for the semi-automatized screening of antileshmanial compounds in intracellular forms of the L. tarentolae parasite.

Method of processing nitrate-containing radioactive liquid wastes

International Nuclear Information System (INIS)

Ogawa, Norito; Nagase, Kiyoharu; Otsuka, Katsuyuki; Ouchi, Jin.

1983-01-01

Purpose: To efficiently concentrate nitrate-containing low level radioactive liquid wastes by electrolytically dialyzing radioactive liquid wastes to decompose the nitrate salt by using an electrolytic cell comprising three chambers having ion exchange membranes and anodes made of special materials. Method: Nitrate-containing low level radioactive liquid wastes are supplied to and electrolytically dialyzed in a central chamber of an electrolytic cell comprising three chambers having cationic exchange membranes and anionic exchange membranes made of flouro-polymer as partition membranes, whereby the nitrate is decomposed to form nitric acid in the anode chamber and alkali hydroxide compound or ammonium hydroxide in the cathode chamber, as well as concentrate the radioactive substance in the central chamber. Coated metals of at least one type of platinum metal is used as the anode for the electrolytic cell. This enables efficient industrial concentration of nitrate-containing low level radioactive liquid wastes. (Yoshihara, H.)

Characterization of borosilicate glasses containing simulated high-level radioactive wastes from PNC

International Nuclear Information System (INIS)

Terai, R.; Eguchi, K.; Yamanaka, H.

1979-01-01

The characterization of borosilicate glasses containing simulated HLW from PNC has been carried out. Phase separation of molybdates, volatilization, viscosity, electrical resistivity, thermal conductivity, elastic modulus, chemical durability, and devitrification of these glasses have been measured, and the suitability of the glasses for the vitrified solidification processes is discussed from the viewpoint of safety

Canada's Global Partnership Program

International Nuclear Information System (INIS)

Ellis, M.

2007-01-01

Curbing the proliferation of biological weapons (BW) is an essential element of the Global Partnership Against the Spread of Weapons and Materials of Mass Destruction. At the Kananaskis Summit in June 2002, G8 Leaders committed to prevent terrorists, or those that harbour them, from acquiring or developing biological weapons and related materials, equipment and technology. To this end, Canada's Global Partnership Program is investing heavily in biological non-proliferation activities in countries of the former Soviet Union. A comprehensive strategy has been developed to help improve biological safety (biosafety) and biological security (biosecurity) with provision for addressing dual-use concerns. Raising awareness and creating a self-sustaining culture of biosecurity is a key driver of the program. Through this strategy, Canada is assisting various FSU countries to: develop and implement effective and practical biosafety/biosecurity standards and guidelines; establish national and/or regional biosafety associations; develop and deliver effective biosafety and biosecurity training; put in place enhanced physical security measures and equipment. In addition to biosafety and biosecurity, the GPP supports a broad range of Biological Non-Proliferation projects and initiatives, including dozens of projects aimed at redirecting former biological weapons scientists. To date, most of these activities have been supported through Canada's contribution to the International Science and Technology Center (ISTC) and the Science and Technology Centre Ukraine (STCU).(author)

Disposal of high level and intermediate level radioactive wastes

International Nuclear Information System (INIS)

Flowers, R.H.

1991-01-01

The waste products from the nuclear industry are relatively small in volume. Apart from a few minor gaseous and liquid waste streams, containing readily dispersible elements of low radiotoxicity, all these products are processed into stable solid packages for disposal in underground repositories. Because the volumes are small, and because radioactive wastes are latecomers on the industrial scene, a whole new industry with a world-wide technological infrastructure has grown up alongside the nuclear power industry to carry out the waste processing and disposal to very high standards. Some of the technical approaches used, and the Regulatory controls which have been developed, will undoubtedly find application in the future to the management of non-radioactive toxic wastes. The repository site outlined would contain even high-level radioactive wastes and spent fuels being contained without significant radiation dose rates to the public. Water pathway dose rates are likely to be lowest for vitrified high-level wastes with spent PWR fuel and intermediate level wastes being somewhat higher. (author)

Development on design methodology of PWR passive containment system

International Nuclear Information System (INIS)

Lee, Seong Wook

1998-02-01

The containment is the most important barrier against the release of radioactive materials into the environment during accident conditions of nuclear power plants. Therefore the development of a reliable containment cooling system is one of key areas in advanced reactor development. To enhance the safety of the containment system, many new containment system designs have been proposed and developed in the world. Several passive containment cooling system (PCCS) concepts for both steel and concrete containment systems are overviewed and assessed comparatively. Major concepts considered are: (a) the spray of water on the outer surface of a steel containment from an elevated tank, (b) an external moat for a steel containment, (c) a suppression pool for a concrete containment, and (d) combination of the internal spray and internal or external condensers for a concrete containment. Emphasis is given to the heat removal principles, the required heat transfer area, system complexity and operational reliability. As one of conceptual design steps of containment, a methodology based on scaling principles is proposed to determine the containment size according to the power level. The AP600 containment system is selected as the reference containment to which the scaling laws are applied. Governing equations of containment pressure are set up in consideration of containment behavior in accident conditions. Then, the dimensionless numbers, which characterize the containment phenomena, are derived for the blowdown dominant and decay heat dominant stage, respectively. The important phenomena in blowdown stage are mass and energy sources and their absorption in containment atmosphere or containment structure, while heat transfer to the outer environment becomes important in decay heat stage. Based on their similarity between the prototype and the model, the containment sizes are determined for higher power levels and are compared with the SPWR containment design values available

Method of vitrificating fine-containing liquid waste

International Nuclear Information System (INIS)

Hagiwara, Minoru; Matsunaka, Kazuhisa.

1989-01-01

This invention concerns a vitrificating method of liquid wastes containing fines (metal powder discharged upon cutting fuel cans) used in a process for treating high level radioactive liquid wastes or a process for treating liquid wastes from nuclear power plants. Liquid wastes containing fines, slurries, etc. are filtered by a filter vessel comprising glass fibers. The fines are supplied as they are to a glass melting furnace placed in the vessel. Filterates formed upon filteration are mixed with other high level radioactive wastes and supplied together with starting glass material to the glass melting furnace. Since the fine-containing liquid wastes are processed separately from high radioactive liquid wastes, clogging of pipeways, etc. can be avoided, supply to the melting furnace is facilitated and the operation efficiency of the vitrification process can be improved. (I.N.)

Biosafety of Prions.

Science.gov (United States)

Bistaffa, Edoardo; Rossi, Martina; De Luca, Chiara M G; Moda, Fabio

2017-01-01

Prions are the infectious agents that cause devastating and untreatable disorders known as Transmissible Spongiform Encephalopathies (TSEs). The pathologic events and the infectious nature of these transmissible agents are not completely understood yet. Due to the difficulties in inactivating prions, working with them requires specific recommendations and precautions. Moreover, with the advent of innovative technologies, such as the Protein Misfolding Cyclic Amplification (PMCA) and the Real Time Quaking-Induced Conversion (RT-QuIC), prions could be amplified in vitro and the infectious features of the amplified products need to be carefully assessed. © 2017 Elsevier Inc. All rights reserved.

Signal peptide-CUB-EGF domain-containing protein 1 (SCUBE1) levels in patients with overt and subclinical hyperthyroidism: effects of treatment.

Science.gov (United States)

Erem, Cihangir; Civan, Nadim; Coskun, Hulya; Mentese, Ahmet; Suleyman, Akile Karacin; Altay, Diler Us; Akgul, Zeynep; Deger, Orhan

2016-06-01

Signal peptide-CUB-EGF domain-containing protein 1 (SCUBE1) has been shown to increase in parallel with platelet activation in acute ischaemic and thrombotic diseases. There has been no study evaluating SCUBE1 levels in patients with overt hyperthyroidism (OHyper) and subclinical hyperthyroidism (SHyper), conditions which are known to show impairment of both endothelial and platelet function. This study sought to evaluate SCUBE1 concentrations in patients with SHyper and OHyper, and assessed the effects of antithyroid drug (ATD) therapy on circulating SCUBE1 levels. Forty-five untreated patients with OHyper, 20 untreated patients with SHyper and 30 age- and sex-matched healthy controls were prospectively included in the study. Biochemical and hormonal parameters were evaluated in all patients before and after treatment. Compared with the control subjects, SCUBE1 levels were significantly increased in patients with SHyper and OHyper (P hyperthyroidism, especially in the subclinical period. © 2015 John Wiley & Sons Ltd.

Options for management of containment integrity during severe accident in Indian PHWR

International Nuclear Information System (INIS)

Sharma, Sanjeev Kr.; Bhartia, D.K.; Mohan, N.; Nair, Suma R.

2015-01-01

Severe accident progressions have the potential to raise the containment pressure beyond the design pressure of the structure. Although the load withstanding capability of the containment structure has been assessed to be substantially higher than the design pressure of the structure (typically 2 times of design pressure), it is possible that a few components of Containment System may degrade leading to excessive release of radioactive fission gases at ground level. Additionally, possible cracks in the concrete of the containment at high pressure may aggravate the release at ground level. Over and above, maintaining high containment pressure high for a longer period increases the ground level release due to leakage from the containment, which effect on dose might be high. For maintaining the Integrity of the Containment, containment pressure can be reduced by either energy management system such as removing the heat from the calandria vault (CVWC) water by using CV water heat exchanger intermittently or reliving the containment atmosphere either through Primary Containment Controlled Discharge (PCCD) or Containment Filtered Venting System (CFVS). Further, it is necessary that these provisions must be initiated below design pressure. This paper presents the analysis for the containment depressurization by using CVWC system restored, manual opening of (PCCD) line and operation of CFVS during the progressions of the accident

Biological Terrorism: US Policies to Reduce Global Biothreats

Science.gov (United States)

2008-09-01

program for pro- jects that advance BEP objectives. Global Cooperation to develop bio- safety and pathogen security stan- dards that are consistent with...security. The Organization for Economic Cooperation and Development ( OECD ) has recently developed voluntary biosecurity guidelines for implementation...Abbreviations AG Australia Group BEP Biosecurity Engagement Program BSL Biosafety level BWC Biological Weapons Convention BWC-ISU Biological Weapons

Clinical Characterization of Aerosolized Francisella tularensis Infection in Cynomolgus macaques

Science.gov (United States)

2016-11-21

All airflows, environmental monitoring, and system balancing were configured, controlled, and recorded through the institute standard automated...were used as a baseline to fit an autoregressive integrated moving average (ARIMA) model. Temperature elevations exceeding three standard deviations...supervision of a pathologist board certified by the American College of Veterinary Pathologist in a biosafety level (BSL) 3 necropsy facility. Tissues

Protective containment behaviour under exceeded design loads

International Nuclear Information System (INIS)

Holub, I.; Stepan, J.; Maly, J.; Schererova, K.

2003-01-01

The contribution describes the calculation results of the behaviour of containment structure if loaded in excess of its design load. The Temelin NPP comprises two WWER 1000 blocks and containment consists of a pre-stressed reinforced concrete structure with a system of unbonded cables. The objective of the calculations was to determine the level of load caused by the internal pressure and temperature at which the containment protective function would fail. In the first step, the maximum overpressure was determined, which may be transferred by the containment structure. In further steps analyses were made of various combinations of simultaneous pressure and temperature loads. The contribution presents relevant calculation results, including the evaluation of containment structure behaviour including liner under loads that exceed its design parameters. (author)

Reactor container facility

International Nuclear Information System (INIS)

Saito, Takashi; Nagasaka, Hideo.

1990-01-01

A dry-well pool for spontaneously circulating stored pool water and a suppression pool for flooding a pressure vessel by feeding water, when required, to a flooding gap by means of spontaneous falling upto the flooding position, thereby flooding the pressure vessel are contained at the inside of a reactor container. Thus, when loss of coolant accidents such as caused by main pipe rupture accidents should happen, pool water in the suppression pool is supplied to the flooding gap by spontaneously falling. Further, if the flooding water uprises exceeding a predetermined level, the flooding gap is in communication with the dry-well pool at the upper and the lower portions respectively. Accordingly, flooding water at high temperature heated by the after-heat of the reactor core is returned again into the flooding gap to cool the reactor core repeatedly. (T.M.)

Waste container and method for containing waste

International Nuclear Information System (INIS)

Ono, Akira; Matsushita, Mitsuhiro; Doi, Makoto; Nakatani, Seiichi.

1990-01-01

In a waste container, water-proof membranes and rare earth element layers are formed on the inner surface of a steel plate concrete container in which steel plates are embedded. Further, rear earth element detectors are disposed each from the inner side of the steel plate concrete container by way of a pressure pipe to the outer side of the container. As a method for actually containing wastes, when a plurality of vessels in which wastes are fixed are collectively enhoused to the waste container, cussioning materials are attached to the inner surface of the container and wastes fixing containers are stacked successively in a plurality of rows in a bag made of elastic materials. Subsequently, fixing materials are filled and tightly sealed in the waste container. When the waste container thus constituted is buried underground, even if it should be deformed to cause intrusion of rain water to the inside of the container, the rare earth elements in the container dissolved in the rain water can be detected by the detectors, the containers are exchanged before the rain water intruding to the inner side is leached to the surrounding ground, to previously prevent the leakage of radioactive nuclides. (K.M.)

Agricultural Production. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed to deal with…

The Roadmap: Future Opportunities for Bioengagement in the MENA Region

Science.gov (United States)

2013-12-01

research to improving biosafety and biosecurity training of laboratory staff, enhancing physical security of research and diagnostic facilities, and...enhancing laboratory and institutional capacity to address biological risks according to international standards ; or building scientific capacity...outbreaks. BEP often supports scientific exchanges to enhance laboratory biosafety and biosecurity training; it could enrich its efforts by

Remotely controlled large container disposal methodology

International Nuclear Information System (INIS)

Amir, S.J.

1994-09-01

Remotely Handled Large Containers (RHLC), also called drag-off boxes, have been used at the Hanford Site since the 1940s to dispose of large pieces of radioactively contaminated equipment. These containers are typically large steel-reinforced concrete boxes, which weigh as much as 40 tons. Because large quantities of high-dose waste can produce radiation levels as high as 200 mrem/hour at 200 ft, the containers are remotely handled (either lifted off the railcar by crane or dragged off with a cable). Many of the existing containers do not meet existing structural and safety design criteria and some of the transportation requirements. The drag-off method of pulling the box off the railcar using a cable and a tractor is also not considered a safe operation, especially in view of past mishaps

Seismic Level 2 PSA

International Nuclear Information System (INIS)

Dirksen, Gerben; Pellissetti, Manuel; Duncan-Whiteman, Paul

2014-01-01

For most external events, the calculation of the core damage frequency (CDF) in Level 1 PSA is sufficient to be able to show that the contribution of the event to the plant risk is negligible. However, it is not sufficient to compare the CDF due to the external event to the total plant CDF; instead the Level 1 PSA result for the event should be compared to the large early release frequency (LERF), or alternatively arguments should be given why the CDF from the external event will not contribute mostly to LERF. For seismic events in particular, it can often not be easily excluded that sequences leading to core damage would not also result in LERF. Since the confinement function is one of the most essential functions for Level 2 PSA, special care must be taken of the containment penetrations. For example systems with containment penetrations that are normally closed during operation or are designed to withstand more than the maximum containment pressure are normally screened out in the Level 2 PSA for the containment isolation function, however the possibility of LOCA in such systems due to an earthquake may nevertheless lead to containment bypass. Additionally, the functionality of passive features may be compromised in case of a beyond design earthquake. In the present paper, we present crucial ingredients of a methodology for a Level 2 seismic PSA. This methodology consists of the following steps: Extension of the seismic equipment list (SEL) to include Level 2 PSA relevant systems (e.g. containment isolation system, features for core melt stabilization, hydrogen mitigation systems), Determination of the systems within the existing SEL with increased demands in case of severe accidents, Determination of essential components for which a dedicated fragility analysis needs to be performed. (author)

Fabrication development for high-level nuclear waste containers for the tuff repository

International Nuclear Information System (INIS)

Domian, H.A.; Holbrook, R.L.; LaCount, D.F.; Babcock and Wilcox Co., Alliance, OH

1990-09-01

This final report completes Phase 1 of an engineering study of potential manufacturing processes for the fabrication of containers for the long-term storage of nuclear waste. An extensive literature and industry review was conducted to identify and characterize various processes. A technical specification was prepared using the American Society of Mechanical Engineers Boiler ampersand Pressure Vessel Code (ASME BPVC) to develop the requirements. A complex weighting and evaluation system was devised as a preliminary method to assess the processes. The system takes into account the likelihood and severity of each possible failure mechanism in service and the effects of various processes on the microstructural features. It is concluded that an integral, seamless lower unit of the container made by back extrusion has potential performance advantages but is also very high in cost. A welded construction offers lower cost and may be adequate for the application. Recommendations are made for the processes to be further evaluated in the next phase when mock-up trials will be conducted to address key concerns with various processes and materials before selecting a primary manufacturing process. 43 refs., 26 figs., 34 tabs

INFLUÊNCIA DOS GRUPOS DE PRESSÃO NO PROCESSO DE ELABORAÇÃO DA LEI DE BIOSSEGURANÇA E SEUS DESDOBRAMENTOS

Directory of Open Access Journals (Sweden)

Alexandre Augusto Alves Guedes

2017-01-01

Full Text Available This article analyzes the acting of Favorable and Contraries Pressure Groups for diffusion of Genetically Modified Organisms (GMOs in the process of elaboration and discussion of Biosafety Law (Law 11.105/05 at the National Congress. It is argued the role played by each of these groups to the Theory of Groups. We are presented the favorable and contrary Pressure Groups as well as the participation of other stakeholders in the process. Subsequently, it's presented how the development of preparation process and voting of the Biosafety Law occurred, as well as the participation of pressure groups in such process. Groups gains and losses are pointed out in the ten years of existence of the law and it is concluded that despite the shocks between them have been important to balance the text of Law, with both having their main demands attended, Favorable Groups obtained, along these ten years, large domination in the approval of their claims in the Commission's guidelines of the National Biosafety Technical Commission (CTNBio without any major intervention by the National Biosafety Council (CNBS.

Gas-permeable ethylene bags for the small scale cultivation of highly pathogenic avian influenza H5N1 and other viruses in embryonated chicken eggs

Directory of Open Access Journals (Sweden)

McCurdy Kimberly S

2010-01-01

Full Text Available Abstract Background Embryonated chicken eggs (ECE are sometimes used for the primary isolation or passage of influenza viruses, other viruses, and certain bacteria. For small-scale experiments with pathogens that must be studied in biosafety level three (BSL3 facilities, inoculated ECE are sometimes manipulated and maintained in small egg incubators within a biosafety cabinet (BSC. To simplify the clean up and decontamination of an egg incubator in case of egg breakage, we explored whether ethylene breather bags could be used to encase ECE inoculated with pathogens. This concept was tested by determining embryo survival and examining virus yields in bagged ECE. Results Virus yields acceptable for many applications were attained when influenza-, alpha-, flavi-, canine distemper-, and mousepox viruses were propagated in ECE sealed within ethylene breather bags. Conclusions For many small-scale applications, ethylene breather bags can be used to encase ECE inoculated with various viruses.

A Review of Removable Surface Contamination on Radioactive Materials Transportation Containers

Energy Technology Data Exchange (ETDEWEB)

Kennedy, Jr, W. E.; Watson, E. C.; Murphy, D. W.; Harrer, B. J.; Harty, R.; Aldrich, J. M.

1981-05-01

This report contains the results of a study sponsored by the U.S. Nuclear Regulatory Commission (NRC) of removable surface contamination on radioactive materials transportation containers. The purpose of the study is to provide information to the NRC during their review of existing regulations. Data was obtained from both industry and literature on three major topics: 1) radiation doses, 2) economic costs, and 3) contamination frequencies. Containers for four categories of radioactive materials are considered including radiopharmaceuticals, industrial sources, nuclear fuel cycle materials, and low-level radioactive waste. Assumptions made in this study use current information to obtain realistic yet conservative estimates of radiation dose and economic costs. Collective and individual radiation doses are presented for each container category on a per container basis. Total doses, to workers and the public, are also presented for spent fuel cask and low-level waste drum decontamination. Estimates of the additional economic costs incurred by lowering current limits by factors of 10 and 100 are presented. Current contamination levels for each category of container are estimated from the data collected. The information contained in this report is designed to be useful to the NRC in preparing their recommendations for new regulations.

Biossegurança: conhecimento e adesão pelos profissionais do corpo de bombeiros militar de Minas Gerais Bioseguridad: conocimiento y adhesión en el cuerpo de bomberos militar de Minas Gerais, uno estudio transversal Biosafety: knowledge and compliance by fire military brigade of Minas Gerais

Directory of Open Access Journals (Sweden)

Adriana Cristina de Oliveira

2013-03-01

como intención provocar la reflexión de los profesionales y de las instituciones responsables, cuanto a la revisión de la propuesta relacionada con la formación de estos trabajadores en bioseguridad y salud ocupacional.It was aimed to identify knowledge and adherence of biosafety recommendations by military Firefighters of Minas Gerais from a city in the metropolitan area of Belo Horizonte, Minas Gerais. A cross-sectional study of quantitative approach was held. The study instrument was a structured questionnaire that included questions about knowledge and attitudes related to biosafety, complicating factors for adherence to standard precautions and incidence of accidents involving biological materials. It was demonstrated knowledge about hand hygiene recommendation in 84,8%, 69,7% didn't know the way of alcohol 70% action. The scrubs were cited as the most difficult personal protective equipment to be used. The militaries haven't had any accident with biological material, similar data to other from literature. It is intended to provoke reflection of the professionals in the area and institutions responsible about the reassessment of the proposal related to the formation of these workers in biosafety and occupational health.

Seismic transient analysis of a containment vessel with penetrations

International Nuclear Information System (INIS)

Dahlke, H.J.; Weiner, E.O.

1979-12-01

A linear transient analysis of the FFTF containment vessel was conducted with STAGS to justify the load levels used for the seismic qualification testing of the heating and ventiliation valve operators. The modeling consists of a thin axisymmetric shell for the containment vessel with four penetrations characterized by linear and rotational inertias as well as attachment characteristics to the shell. Motions considered are horizontal, rocking and vertical input to the base, and the solution is carried out by direct integration. Results show that the test levels and the approximate analyses considered are conservative. Response spectra for some containment vessel penetrations applicable to the model are presented

Humidity control device in a reactor container

International Nuclear Information System (INIS)

Aizawa, Motohiro; Igarashi, Hiroo; Osumi, Katsumi; Kimura, Takashi.

1986-01-01

Purpose: To provide a device capable of maintaining the inside of a container under high humidity circumstantial conditions causing less atmospheric corrosions, in order to prevent injuries due to atmospheric corrosions to smaller diameter stainless steel pipeways in the reactor container. Constitution: Stress corrosion cracks (SCC) to the smaller diameter stainless steel pipeways are caused dependent on the relative humidity and it is effective as the countermeasure against SCC to maintain the relative humidity at a low level less than 30 % or high level greater than 60 %. Based on the above findings, a humidity control device is disposed so as to maintain the relative humidity for the atmosphere within a reactor core on a higher humidity region. The device is adapted such that recycling gas in the dry-well coolant circuit is passed through an orifice to atomize the water introduced from feedwater pipe and introduce into a reactor core or such that the recycling gases in the dry-well cooling circuit are bubbled into water to remove chlorine gas in the reactor container gas thereby increasing the humidity in the reactor container. (Kamimura, M.)

The effects of four hypocaloric diets containing different levels of sucrose or high fructose corn syrup on weight loss and related parameters

OpenAIRE

Lowndes, Joshua; Kawiecki, Diana; Pardo, Sabrina; Nguyen, Von; Melanson, Kathleen J; Yu, Zhiping; Rippe, James M

2012-01-01

Abstract Background The replacement of sucrose with HFCS in food products has been suggested as playing a role in the development of obesity as a public health issue. The objective of this study was to examine the effects of four equally hypocaloric diets containing different levels of sucrose or high fructose corn syrup (HFCS). Methods This was a randomized, prospective, double blind trial, with overweight/obese participants measured for body composition and blood chemistry before and after ...

Corrosion issues in high-level nuclear waste containers

Science.gov (United States)

Asl, Samin Sharifi

In this dissertation different aspects of corrosion and electrochemistry of copper, candidate canister material in Scandinavian high-level nuclear waste disposal program, including the thermodynamics and kinetics of the reactions that are predicted to occur in the practical system have been studied. A comprehensive thermodynamic study of copper in contact with granitic groundwater of the type and composition that is expected in the Forsmark repository in Sweden has been performed. Our primary objective was to ascertain whether copper would exist in the thermodynamically immune state in the repository, in which case corrosion could not occur and the issue of corrosion in the assessment of the storage technology would be moot. In spite of the fact that metallic copper has been found to exist for geological times in granitic geological formations, copper is well-known to be activated from the immune state to corrode by specific species that may exist in the environment. The principal activator of copper is known to be sulfur in its various forms, including sulfide (H2S, HS-, S2-), polysulfide (H2Sx, HSx -, Sx 2-), poly sulfur thiosulfate ( SxO3 2-), and polythionates (SxO6 2-). A comprehensive study of this aspect of copper chemistry has never been reported, and yet an understanding of this issue is vital for assessing whether copper is a suitable material for fabricating canisters for the disposal of HLNW. Our study identifies and explores those species that activate copper; these species include sulfur-containing entities as well as other, non-sulfur species that may be present in the repository. The effects of temperature, solution pH, and hydrogen pressure on the kinetics of the hydrogen electrode reaction (HER) on copper in borate buffer solution have been studied by means of steady-state polarization measurements, including electrochemical impedance spectroscopy (EIS). In order to obtain electrokinetic parameters, such as the exchange current density and the

Secondary Containers and Service Containers for Pesticides

Science.gov (United States)

Secondary containers and service containers are used by pesticide applicators in the process of applying a pesticide. EPA does not require secondary containers or service containers to be labeled or to meet particular construction standards. Learn more.

Agricultural Production. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with agricultural production. SMAT materials…

A simple procedure to analyze positions of interest in infectious cell cultures by correlative light and electron microscopy.

Science.gov (United States)

Madela, Kazimierz; Banhart, Sebastian; Zimmermann, Anja; Piesker, Janett; Bannert, Norbert; Laue, Michael

2014-01-01

Plastic cell culture dishes that contain a thin bottom of highest optical quality including an imprinted finder grid (μ-Dish Grid-500) are optimally suited for routine correlative light and electron microscopy using chemical fixation. Such dishes allow high-resolution fluorescence and bright-field imaging using fixed and living cells and are compatible with standard protocols for scanning and transmission electron microscopy. Ease of use during cell culture and imaging, as well as a tight cover render the dishes particularly suitable for working with infectious organisms up to the highest biosafety level. Detailed protocols are provided and demonstrated by showing two examples: monitoring the production of virus-like particles of the Human Endogenous Retrovirus HERV-K(HML-2) by HeLa cells and investigation of Rab11-positive membrane-compartments of HeLa cells after infection with Chlamydia trachomatis. © 2014 Elsevier Inc. All rights reserved.

CASTOR registered HAW28M - a high heat load cask for transport and storage of vitrified high level waste containers

International Nuclear Information System (INIS)

Vossnacke, A.; Klein, K.; Kuehne, B.

2004-01-01

Within the German return programme for vitrified high level waste (HLW) from reprocessing at COGEMA and BNFL up to now 39 casks loaded with 28 containers each were transported back to Germany and are stored in the Interim Storage Facility Gorleben (TBL-G) for up to 40 years. For transport and storage in all but one case the GNB casks CASTOR registered HAW 20/28 CG have been used. This cask type is designed to accommodate 20 or 28 HLW containers with a total thermal power of 45 kW maximum. In the near future, among the high level waste, which has to be returned to Germany, there will be an increasing number of containers of which the heat capacity and radioactive inventory will exceed the technical limits of the CASTOR registered HAW 20/28 CG. Therefore GNB has started the development of a new cask generation, named CASTOR registered HAW28M, meeting these future requirements. The CASTOR registered HAW28M is especially developed for the transport of vitrified residues from France and Great Britain to Germany. It complies with the international regulations for type B packages according to IAEA (International Atomic Energy Agency). It is thus guaranteed that even in case of any accident the cask body and the lid system remain functional and the safe confinement of the radioactive contents remains intact during transport. The CASTOR registered HAW28M fulfills not only the requirements for transport but also the acceptance criteria of interim storage: radiation shielding, heat dissipation, safe confinement under both normal and hypothetical accident conditions. Storage buildings such as the TBL-G simply support the safety functions of the cask. The challenge for the development results from higher requirements of the technical specification, particularly related to fuel which is reprocessed. As a consequence of the reprocessing of fuel with increased enrichment and burn up, higher heat capacity and sophisticated shielding measures have to be considered. For the CASTOR

Corrosion Resistance of Murataite-Based Ceramics Containing Simulated Actinide/Rare Earth Fraction of High Level Waste

International Nuclear Information System (INIS)

Stefanovsky, S.V.; Varlakova, G.A.; Burlaka, O.A.; Stefanovsky, O.I.; Nikonov, B.S.; Yudintsev, S.V.

2009-01-01

Two samples of murataite-based ceramics containing simulated Actinide/Rare Earth (An/RE) fraction of high level waste (HLW) produced by a cold crucible inductive melting (CCIM) were tested using a single-pass-flow-through (SPFT) procedure. As-prepared and leached samples were examined by X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive system (SEM/EDS). The as-prepared ceramics were composed of murataite, perovskite and crichtonite as well as minor zirconolite and rutile (in one sample). Elemental concentrations at pH=2 and T=90 deg. C were measured and leach rates were calculated. Perovskite concentrating Ca and Ce-group REs (La, Ce, Pr, Nd) was found to be the lowest durable phase. Leach rates of Ca and Ce-group REs (Ce, Nd) from the sample with higher perovskite content were found to be higher than those of U and Zr by one to three orders of magnitude. Elemental leach rates from the ceramic with lower perovskite content are lower by up to 10 times. (authors)

Action plan for response to abnormal conditions in Hanford high level radioactive liquid waste storage tanks containing flammable gases

International Nuclear Information System (INIS)

Sherwood, D.J.

1994-03-01

Radioactive liquid waste tends to produce hydrogen as a result of the interaction of gamma radiation and water. In tanks containing organic chelating agents, additional hydrogen gas as well as nitrous oxide and ammonia can be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site, contain waste that retains the gases produced in them until large quantities are released rapidly to the tank vapor space. Tanks filled to near capacity have relatively little vapor space; therefore, if the waste suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture may result. The most notable waste tank with a flammable gas problem is tank 241-SY-101. Waste in this tank has occasionally released enough flammable gas to burn if an ignition source had been present inside of the tank. Several other waste tanks exhibit similar behavior to a lesser magnitude. Administrative controls have been developed to assure that these Flammable Gas Watch List tanks are safely maintained. Responses have also been developed for off-normal conditions which might develop in these tanks. In addition, scientific and engineering studies are underway to further understand and mitigate the behavior of the Flammable Gas Watch List tanks

Triage and management of accidental laboratory exposures to biosafety level-3 and -4 agents.

Science.gov (United States)

Jahrling, Peter; Rodak, Colleen; Bray, Mike; Davey, Richard T

2009-06-01

The recent expansion of biocontainment laboratory capacity in the United States has drawn attention to the possibility of occupational exposures to BSL-3 and -4 agents and has prompted a reassessment of medical management procedures and facilities to deal with these contingencies. A workshop hosted by the National Interagency Biodefense Campus was held in October 2007 and was attended by representatives of all existing and planned BSL-4 research facilities in the U.S. and Canada. This report summarizes important points of discussion and recommendations for future coordinated action, including guidelines for the engineering and operational controls appropriate for a hospital care and isolation unit. Recommendations pertained to initial management of exposures (ie, immediate treatment of penetrating injuries, reporting of exposures, initial evaluation, and triage). Isolation and medical care in a referral hospital (including minimum standards for isolation units), staff recruitment and training, and community outreach also were addressed. Workshop participants agreed that any unit designated for the isolation and treatment of laboratory employees accidentally infected with a BSL-3 or -4 pathogen should be designed to maximize the efficacy of patient care while minimizing the risk of transmission of infection. Further, participants concurred that there is no medically based rationale for building care and isolation units to standards approximating a BSL-4 laboratory. Instead, laboratory workers accidentally exposed to pathogens should be cared for in hospital isolation suites staffed by highly trained professionals following strict infection control procedures.

Exterior and interior physical quality of egg of laying hens fed diets containing different dietary purslane levels

Science.gov (United States)

Kartikasari, L. R.; Hertanto, B. S.; Pranoto, D.; Salim, W. N.; Nuhriawangsa, A. M. P.

2017-04-01

Purslane is considered a rich vegetable source of alpha-linolenic acid, beta-carotene and various antioxidants. The objective of the study was to investigate the effect of different dietary levels of purslane meal (Portulaca oleracea) in the diets of laying hens on physical quality of eggs. A total of 125 Hy-Line Brown hens (54 weeks old) were placed at individual cages and assigned to five dietary treatments. The diets were supplemented with 0, 2, 4, 6 and 8% purslane meal. Laying hens were fed for 5 weeks after a typical period of adaptation (7 days). Water and feed were provided ad libitum. A total of 25 egg samples of day 28 and day 35 (n = 5 egg yolks for each treatment) were collected to analyse exterior and interior physical quality of eggs. The data were analysed using ANOVA. Differences between treatment means were further analysed using Duncan’s New Multiple Range Test. Results showed that feeding different purslane meal levels in the diets improved egg weight, yolk weight, albumen weight and yolk colour. The highest intensity of yolk colour was obtained with the diet containing 8% purslane meal. However, dietary treatments did not affect egg index, albumen index, yolk index, shell weight, shell thickness and Haugh Unit. It is concluded that including purslane meal to laying hen diets increases the physical qualities of the eggs.

Laboratory corrosion tests on candidate high-level waste container materials: Results from the Belgian programme

International Nuclear Information System (INIS)

Druyts, F.; Kursten, B.; Iseghem, P. Van

2004-01-01

The Belgian SAFIR-2 concept foresees the geological disposal of conditioned high-level radioactive waste in stainless steel containers and overpacks placed in a concrete gallery backfilled with Boom clay or a bentonite-type backfill. In addition to earlier in situ experiments, we used a laboratory approach to investigate the corrosion properties of selected stainless steels in Boom clay and bentonite environments. In the SAFIR-2 concept, AISI 316L hMo is the main candidate overpack material. As an alternative, we also investigated the higher alloyed stainless steel UHB 904L. Our study focused on localised corrosion and in particular pitting. We used cyclic potentiodynamic polarisation measurements to determine the pit nucleation potential E NP and the protection potential E PP . The evolution of the corrosion potential with time was determined by monitoring the open circuit potential in synthetic clay-water over extended periods. In this paper we present and discuss some results from our laboratory programme, focusing on long-term interactions between the stainless steel overpack and the backfill materials. We describe in particular the influence of chloride and thio-sulphate ions on the pitting corrosion behaviour. The results show that, under geochemical conditions typical for geological disposal, i.e. [Cl-] ∼ 30 mg/L for a Boom clay backfill and [Cl-] ∼ 90 mg/L for a bentonite backfill, neither AISI 316L hMo nor UHB 904L is expected to present pitting problems. An important factor in the long-term prediction of the corrosion behaviour however, is the robustness of the model for the evolution of the geochemistry of the backfill. Indeed, at chloride levels higher than 1000 mg/L, we predict pitting corrosion for AISI 316L hMo. (authors)

Sequencing two cooperating automated stacking cranes in a container terminal

NARCIS (Netherlands)

Vis, I.F.A.; Carlo, H.J.

2010-01-01

The containerized trade market is growing rapidly with the uprising of the Far East. Container ports worldwide should be responsive by developing tools to handle these massive volumes of containers in order to retain their level of competitiveness. One of the areas in a container terminal that is

Endothelial dysfunction in high fructose containing diet fed rats: Increased nitric oxide and decreased endothelin-1 levels in liver tissue

Directory of Open Access Journals (Sweden)

Zeki Arı

2010-09-01

Full Text Available Objectives: Dietary high fructose consumption which is closely associated with endothelial dysfunction via insulin re-sistance has recently increased in developed countries. Insulin resistance has a promoter effect on many metabolic disorders such as syndrome X, polycystic ovary syndrome, Type 2 diabetes mellitus etc. Our aim in this study is to understand the impact of increased fructose intake on metabolisms of glucose, insulin and endothelial dysfunction by measuring nitric oxide (NO and endothelin-1 (ET-1 levels in hepatic tissue which is crucial in fructose metabolism.Materials and Methods: We designed an animal study to understand increased fructose intake on hepatic endothe-lium. Twenty adult male albino rats were divided into two groups; the study group (group 1, n=10 received isocaloric fructose enriched diet (fructose-fed rats, containing 18.3% protein, 60.3% fructose and 5.2% fat while the control group received purified regular chow (group 2, n=10 for 2 weeks. After feeding period, blood and hepatic tissue samples were collected and glucose, insulin, NO and ET-1 levels were analysed.Results: We found increased fasting glucose and insulin levels and impaired glucose tolerance in fructose fed rats. Higher NO and lower ET–1 levels were also detected in hepatic tissue samples of the group 1.Conclusion: Increased fructose consumption has deleterious effects on glucose tolerance, insulin resistance and may cause to endothelial dysfunction.

Farmers as Employers. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of farmers as employers: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication and numeracy skills…

Effects of Yogurt Containing Fermented Pepper Juice on the Body Fat and Cholesterol Level in High Fat and High Cholesterol Diet Fed Rat.

Science.gov (United States)

Yeon, Su-Jung; Hong, Go-Eun; Kim, Chang-Kyu; Park, Woo Joon; Kim, Soo-Ki; Lee, Chi-Ho

2015-01-01

This experiment investigated whether yogurt containing fermented pepper juice (FPJY) affects cholesterol level in high fat and high cholesterol diet (HFCD) fed rat. Twenty five Sprague-Dawley male rats of 7 wk were divided into 5 groups, and fed following diets for 9 wk; CON (control diet), HFCD (HFCD), PY (HFCD supplemented with 2% of plain yogurt), LFY (HFCD supplemented with 2% of FPJY), and HFY (HFCD supplemented with 5% of FPJY). In the LFY group, hepatic total lipid level decreased significantly compared to the HFCD group (p0.05). In HFY group, body weight and hepatic total lipid level significantly decreased over the HFCD group (p0.05). Liver weight decreased as FPJY content was increased. Results suggested FPJY would inhibit organ hypertrophy and accumulation of body fat, hepatic lipid, and cholesterol in HFCD fed rat.

STEM VQ Method, Using Scanning Transmission Electron Microscopy (STEM) for Accurate Virus Quantification

Science.gov (United States)

2017-02-02

WEEV in Ontario, Canada in 194126. This virus has a passage history including both animals and cell culture. Biosafety level (BSL-)-3 laboratory...Agarose-Based Plaque Assay Each virus stock was quantitated by standard agarose-based plaque assay23...samples used here were well prepared and the standard macro was used. As we have developed this method we have observed that while inferior

Antenna design for mobile devices

CERN Document Server

Zhang, Zhijun

2017-01-01

- Integrates state-of-the-art technologies with a special section for step-by-step antenna design - Features up-to-date bio-safety and electromagnetic compatibility regulation compliance and latest standards - Newly updated with MIMO antenna design, measurements and requirements - Accessible to readers of many levels, from introductory to specialist - Written by a practicing expert who has hired and trained numerous engineers

The Design of Cooling System Model on The AP1000 Containment

International Nuclear Information System (INIS)

Daddy Setyawan; Yerri Noer Kartiko; Aryadi Suwono; Ari Darmawan Pasek; Nathanael P Tandian; Efrizon Umar

2009-01-01

The policy of national energy leads to the utilization of new energy as nuclear energy, and also contains some efforts to increase reactor safety and optimizing in the design of safety system component such as passive cooling system on reactor containment tank. Because of this, the assessment of safety level to passive safety system needs to be made. To increase the understanding it, the design of cooling system model on containment tank should be done to get safety level on cooling system in the AP1000 containment. To reach the similar model with reality and inexpensive cost, we should make assessment about similarity and dimensionless number. While the heat transfer of air natural circulation and water spray cooling system are a result of gravity approach, we can calculate Grashof modification number and Reynolds number respectively. By this approach, we have a factor of forty for laboratory model. From this model, we hope that we get characteristic correlation to heat transfer on the containment of AP1000 for both air natural circulation and water spray result from gravity. Finally, we can assess the safety level of passive cooling system on the AP1000 containment. (author)

Fructose containing sugars do not raise blood pressure or uric acid at normal levels of human consumption.

Science.gov (United States)

Angelopoulos, Theodore J; Lowndes, Joshua; Sinnett, Stephanie; Rippe, James M

2015-02-01

The impact of fructose, commonly consumed with sugars by humans, on blood pressure and uric acid has yet to be defined. A total of 267 weight-stable participants drank sugar-sweetened milk every day for 10 weeks as part of their usual, mixed-nutrient diet. Groups 1 and 2 had 9% estimated caloric intake from fructose or glucose, respectively, added to milk. Groups 3 and 4 had 18% of estimated caloric intake from high fructose corn syrup or sucrose, respectively, added to the milk. Blood pressure and uric acid were determined prior to and after the 10-week intervention. There was no effect of sugar type on either blood pressure or uric acid (interaction P>.05), and a significant time effect for blood pressure was noted (Pfructose at the 50th percentile level, whether consumed as pure fructose or with fructose-glucose-containing sugars, does not promote hyperuricemia or increase blood pressure. © 2014 Wiley Periodicals, Inc.

Analysis of Weld Fabrication Flaws in High-Level Radioactive Waste Disposal Containers: Experiences from the US Programme

International Nuclear Information System (INIS)

Bullen, Daniel; Apted, Mick

2002-11-01

The purpose of this report is to examine key issues regarding the fabrication, closure and defect detection in canisters for radioactive waste disposal in a deep geological repository. As a preliminary step, a review is made of the closure-weld design and non-destructive evaluation (NDE) of the closure seal for the US high-level waste repository programme. This includes statistical analysis of the data obtained by NDE and identification of key areas of investigation where additional data are required. Information from other industrial experiences on closure and flaw detection of metal containers is also reviewed. The canister material and closure methods for the US programme and industrial activities reviewed here differ from those of SKB's KBS-3 reference design. The issues and approaches to issue resolution identified from the US programme and industrial analogues, however, can provide an initial basis for preparing for independent review of SKB's canister closure plans and encapsulation facility

Databases on biotechnology and biosafety of GMOs.

Science.gov (United States)

Degrassi, Giuliano; Alexandrova, Nevena; Ripandelli, Decio

2003-01-01

Due to the involvement of scientific, industrial, commercial and public sectors of society, the complexity of the issues concerning the safety of genetically modified organisms (GMOs) for the environment, agriculture, and human and animal health calls for a wide coverage of information. Accordingly, development of the field of biotechnology, along with concerns related to the fate of released GMOs, has led to a rapid development of tools for disseminating such information. As a result, there is a growing number of databases aimed at collecting and storing information related to GMOs. Most of the sites deal with information on environmental releases, field trials, transgenes and related sequences, regulations and legislation, risk assessment documents, and literature. Databases are mainly established and managed by scientific, national or international authorities, and are addressed towards scientists, government officials, policy makers, consumers, farmers, environmental groups and civil society representatives. This complexity can lead to an overlapping of information. The purpose of the present review is to analyse the relevant databases currently available on the web, providing comments on their vastly different information and on the structure of the sites pertaining to different users. A preliminary overview on the development of these sites during the last decade, at both the national and international level, is also provided.

Commercial disposal of high integrity containers (HICs) containing EPICOR-II prefilters from Three Mile Island: Reflections and projections

International Nuclear Information System (INIS)

McConnell, J.W. Jr.; Schmitt, R.C.

1986-09-01

The processes of loading, transporting, and commerically disposing of 46 EPICOR-II prefilters, each contained in a High Integrity Container (HIC), are described. Also described are participation of the regulatory agencies and industrial organizations in combining their efforts to accomplish this task. The significant aspect of the task was that the commerical disposal involved the first-of-a-kind production use of a reinforced concrete HIC at the US Ecology, Inc., facility in the State of Washington. The same type of container probably can be used in below- or above-ground disposal of other types of high specific activity, low-level nuclear wastes. 14 refs., 4 figs

High-throughput screening of a diversity collection using biodefense category A and B priority pathogens.

Science.gov (United States)

Barrow, Esther W; Clinkenbeard, Patricia A; Duncan-Decocq, Rebecca A; Perteet, Rachel F; Hill, Kimberly D; Bourne, Philip C; Valderas, Michelle W; Bourne, Christina R; Clarkson, Nicole L; Clinkenbeard, Kenneth D; Barrow, William W

2012-08-01

One of the objectives of the National Institutes of Allergy and Infectious Diseases (NIAID) Biodefense Program is to identify or develop broad-spectrum antimicrobials for use against bioterrorism pathogens and emerging infectious agents. As a part of that program, our institution has screened the 10 000-compound MyriaScreen Diversity Collection of high-purity druglike compounds against three NIAID category A and one category B priority pathogens in an effort to identify potential compound classes for further drug development. The effective use of a Clinical and Laboratory Standards Institute-based high-throughput screening (HTS) 96-well-based format allowed for the identification of 49 compounds that had in vitro activity against all four pathogens with minimum inhibitory concentration values of ≤16 µg/mL. Adaptation of the HTS process was necessary to conduct the work in higher-level containment, in this case, biosafety level 3. Examination of chemical scaffolds shared by some of the 49 compounds and assessment of available chemical databases indicates that several may represent broad-spectrum antimicrobials whose activity is based on novel mechanisms of action.

Corrosion susceptibility of steel drums to be used as containers for intermediate level nuclear waste

International Nuclear Information System (INIS)

Farina, S.; Schulz Rodriguez, F.; Duffo, G.

2013-01-01

The present work is a study of the corrosion susceptibility of steel drums in contact with cemented ion-exchange resins contaminated with different types and concentrations of aggressive species. A special type of specimen was manufactured to simulate the cemented ion-exchange resins in the drum. The evolution of the corrosion potential and the corrosion rate of the steel, as well as the electrical resistivity of the matrix were monitored over a time period of 900 days. The aggressive species studied were chloride ions (the main ionic species of concern) and sulphate ions (produced during radiolysis of the cationic exchange-resins after cementation). The work was complemented with an analysis of the corrosion products formed on the steel in each condition, as well as the morphology of the corrosion products. When applying the results obtained in the present work to estimate the corrosion depth of the steel drums containing the cemented radioactive waste after a period of 300 years (foreseen durability of the Intermediate Level Radioactive Waste facility in Argentina), it is found that in the most unfavourable case (high chloride contamination), the corrosion penetration will be considerably lower than the thickness of the wall of the steel drums. (authors)

Container crane for sea freight containers

NARCIS (Netherlands)

Luttekes, E.; Rijsenbrij, J.C.

2001-01-01

The invention relates to a container crane for loading and unloading seaborne containers. The container crane comprises a bridge girder (7), a jib (8), at least two crabs (11, 12) which can travel along the said bridge girder and/or jib and are provided with hoist means for lifting and lowering the

FAUST/CONTAIN; FAUST/CONTAIN

Energy Technology Data Exchange (ETDEWEB)

Cherdron, W.; Minges, J.; Sauter, H.; Schuetz, W.

1995-08-01

The FAUNA facility has been restructured after completion of the sodium fire experiments. It is now serving LWR research, cf. report II on program no. 32.21.02 concerning steam explosions. The CONTAIN code system for computing the thermodynamic, aerosol and radiological phenomena in a containment under severe accident conditions is being developed with a new to fission product release and transport. (orig.)

Effectiveness of containment sprays in containment management

International Nuclear Information System (INIS)

Nourbakhsh, H.P.; Perez, S.E.; Lehner, J.R.

1993-05-01

A limited study has been performed assessing the effectiveness of containment sprays-to mitigate particular challenges which may occur during a severe accident. Certain aspects of three specific topics related to using sprays under severe accident conditions were investigated. The first was the effectiveness of sprays connected to an alternate water supple and pumping source because the actual containment spray pumps are inoperable. This situation could occur during a station blackout. The second topic concerned the adverse as well as beneficial effects of using containment sprays during severe accident scenario where the containment atmosphere contains substantial quantities of hydrogen along with steam. The third topic was the feasibility of using containment sprays to moderate the consequences of DCH

APR1400 Containment Simulation with CONTAIN code

Energy Technology Data Exchange (ETDEWEB)

Hwang, Moon Kyu; Chung, Bub Dong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2010-05-15

The more realistic containment pressure variation predicted by the CONTAIN code through the coupled analysis during a large break loss of coolant accident in the nuclear power plant is expected to provide more accurate prediction for the plant behavior than a standalone MARS-KS calculation. The input deck has been generated based on the already available ARP- 1400 input for CONTEMPT code. Similarly to the CONTEMPT input deck, a simple two-cell model was adopted to model the containment behavior, one cell for the containment inner volume and another cell for the environment condition. The developed input for the CONTAIN code is to be eventually applied for the coupled code calculation of MARS-KS/CONTAIN

APR1400 Containment Simulation with CONTAIN code

International Nuclear Information System (INIS)

Hwang, Moon Kyu; Chung, Bub Dong

2010-01-01

The more realistic containment pressure variation predicted by the CONTAIN code through the coupled analysis during a large break loss of coolant accident in the nuclear power plant is expected to provide more accurate prediction for the plant behavior than a standalone MARS-KS calculation. The input deck has been generated based on the already available ARP- 1400 input for CONTEMPT code. Similarly to the CONTEMPT input deck, a simple two-cell model was adopted to model the containment behavior, one cell for the containment inner volume and another cell for the environment condition. The developed input for the CONTAIN code is to be eventually applied for the coupled code calculation of MARS-KS/CONTAIN

Plutonium accident resistant container project

International Nuclear Information System (INIS)

Andersen, J.A.

1978-05-01

The PARC (plutonium accident resistant container) project resulted in the design, development, and certification testing of a crashworthy air-transportable plutonium package (shipping container) for certification by the USNRC. This PAT-1 (plutonium air transportable) package survives a very severe sequential test program of impact, crush, puncture, slash, burn, and water immersion. There is also an individual hydrostatic pressure test. The package has a payload mass capacity of 2 kg of PuO2 and a thermal capacity of 25 watts. The design rationale for very high energy absorption (impact, crush, puncture, and slash protection) with residual high-level fire protection, resulted in a reasonalby small air-transportable package, advancing the packaging state-of-art. Optimization design iterations were utilized in the areas of impact energy absorption and stress and thermal analysis. Package test results are presented in relation to radioactive materials containment acceptance criteria, shielding and criticality standards

Risk of pneumonia with budesonide-containing treatments in COPD: an individual patient-level pooled analysis of interventional studies.

Science.gov (United States)

Hollis, Sally; Jorup, Carin; Lythgoe, Dan; Martensson, Gunnar; Regnell, Pontus; Eckerwall, Göran

2017-01-01

Concerns have been raised that treatment of COPD with inhaled corticosteroids may increase pneumonia risk. Responding to a request from the European Medicines Agency Pharmacovigilance Risk Assessment Committee, a pooled analysis of interventional studies compared pneumonia risk with inhaled budesonide-containing versus non-budesonide-containing treatments and the impact of other clinically relevant factors. AstraZeneca-sponsored, parallel-group, double-blind, randomized controlled trials meeting the following criteria were included: >8 weeks' duration; ≥60 patients with COPD; inhaled budesonide treatment arm (budesonide/formoterol or budesonide); and non-budesonide-containing comparator arm (formoterol or placebo). Primary and secondary outcomes were time to first pneumonia treatment-emergent serious adverse event (TESAE) and treatment-emergent adverse event (TEAEs), respectively, analyzed using Cox regression models stratified by study. Eleven studies were identified; 10,570 out of 10,574 randomized patients receiving ≥1 dose of study treatment were included for safety analysis (budesonide-containing, n=5,750; non-budesonide-containing, n=4,820). Maximum exposure to treatment was 48 months. The overall pooled hazard ratio (HR), comparing budesonide versus non-budesonide-containing treatments, was 1.15 for pneumonia TESAEs (95% confidence interval [CI]: 0.83, 1.57) and 1.13 for pneumonia TEAEs (95% CI: 0.94, 1.36). The annual incidence of pneumonia TESAEs was 1.9% and 1.5% for budesonide-containing and non-budesonide-containing treatments, respectively. Comparing budesonide/formoterol with non-budesonide-containing treatment, the HRs for pneumonia TESAEs and TEAEs were 1.00 (95% CI: 0.69, 1.44) and 1.21 (95% CI: 0.93, 1.57), respectively. For budesonide versus placebo, HRs were 1.57 for pneumonia TESAEs (95% CI: 0.90, 2.74) and 1.07 for pneumonia TEAEs (95% CI: 0.83, 1.38). This pooled analysis found no statistically significant increase in overall risk for

Towards a More Reliable and Available Docker-based Container Cloud

OpenAIRE

Verma, Mudit; Dhawan, Mohan

2017-01-01

Operating System-level virtualization technology, or containers as they are commonly known, represents the next generation of light-weight virtualization, and is primarily represented by Docker. However, Docker's current design does not complement the SLAs from Docker-based container cloud offerings promising both reliability and high availability. The tight coupling between the containers and the Docker daemon proves fatal for the containers' uptime during daemon's unavailability due to eith...

Prenatal Experiences of Containment in the Light of Bion's Model of Container/Contained

Science.gov (United States)

Maiello, Suzanne

2012-01-01

This paper explores the idea of possible proto-experiences of the prenatal child in the context of Bion's model of container/contained. The physical configuration of the embryo/foetus contained in the maternal uterus represents the starting point for an enquiry into the unborn child's possible experiences of its state of being contained in a…

Continuous containment monitoring with containment pressure fluctuation

International Nuclear Information System (INIS)

Dick, J.E.

1996-01-01

The monitoring of the integrity of containments particularly but not exclusively for nuclear plants is dealt with in this invention. While this application is primarily concerned with containment monitoring in the context of the single unit design, it is expected that the concepts presented will be universally applicable to any containment design, including containments for non-nuclear applications such as biological laboratories. The nuclear industry has long been interested in a means of monitoring containment integrity on a continuous basis, that is, while the reactor is operating normally. 12 refs., 2 figs

Evaluation of disposal site geochemical performance using a containment factor

International Nuclear Information System (INIS)

Lerman, A.; Domenico, P.A.; Bartlett, J.W.

1988-01-01

The containment factor is a measure of retention by geologic setting of wastes released from a repository. The factor is alternatively defined either in terms of several measurable hydrological and geochemical parameters, or in terms of amounts of waste components that may be released to the geologic setting and, subsequently, to the environment. Containment factors for individual waste components in a given geologic setting are functions of groundwater to rock volume ratios, sorption or exchange characteristics of the rocks, and containment time to groundwater travel time ratios. For high-level radioactive wastes, containment factors based on the NRC and EPA limit values for cumulative releases from waste and to the environment provide a measure of the geochemical performance of the geologic setting in tuff, basalt, and salt. The containment factor values for individual nuclides from high-level wastes indicate that for some of the nuclides containment may be achieved by groundwater travel time along. For other nuclides, additional performance functions need to be allocated to geochemical retention by such processes as sorption, ion-exchange or precipitation

Influence of Nano-HA Coated Bone Collagen to Acrylic (Polymethylmethacrylate Bone Cement on Mechanical Properties and Bioactivity.

Directory of Open Access Journals (Sweden)

Tao Li

Full Text Available This research investigated the mechanical properties and bioactivity of polymethylmethacrylate (PMMA bone cement after addition of the nano-hydroxyapatite(HA coated bone collagen (mineralized collagen, MC.The MC in different proportions were added to the PMMA bone cement to detect the compressive strength, compression modulus, coagulation properties and biosafety. The MC-PMMA was embedded into rabbits and co-cultured with MG 63 cells to exam bone tissue compatibility and gene expression of osteogenesis.15.0%(wt impregnated MC-PMMA significantly lowered compressive modulus while little affected compressive strength and solidification. MC-PMMA bone cement was biologically safe and indicated excellent bone tissue compatibility. The bone-cement interface crosslinking was significantly higher in MC-PMMA than control after 6 months implantation in the femur of rabbits. The genes of osteogenesis exhibited significantly higher expression level in MC-PMMA.MC-PMMA presented perfect mechanical properties, good biosafety and excellent biocompatibility with bone tissues, which has profoundly clinical values.

Occupational Health and Safety. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed…

Farm Management and Leadership. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in farm management and leadership: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner with the reading, writing, and spoken communication skills needed to deal with…

Report on container technology for the ATLAS TDAQ system

CERN Document Server

Gadirov, Hamid

2016-01-01

My summer student project "Container technology for the Upgrade of the ATLAS Trigger and Data Acquisition (TDAQ) system" focused on the research of container-based (operating system-level) virtualization for TDAQ software. Several tests were performed on Docker platform, all of them showed compatibility for TDAQ software.

Construction and Quality Analysis of Transgenic Rehmannia glutinosa Containing TMV and CMV Coat Protein

Directory of Open Access Journals (Sweden)

Zhongqiu Teng

2016-08-01

Full Text Available Plant viruses, especially tobacco mosaic virus (TMV and cucumber mosaic virus (CMV are serious threats to Rehmannia glutinosa which is a “top grade” herb in China. In the present study, TMV- and CMV-resistant Rehmannia glutinosa Libosch. plants were constructed by transforming the protein (CP genes of TMV and CMV into Rehmannia glutinosa via a modified procedure of Agrobacterium tumefaciens-mediated transformation. Integration and expression of TMV CP and CMV CP transgenes in 2 lines, LBA-1 and LBA-2, were confirmed by PCR, Southern blot and RT-PCR. Both LBA-1 and LBA-2 were resistant to infection of homologous TMV and CMV strains. The quality of transgenic Rehmanniae Radix was evaluated based on fingerprint analysis and components quantitative analysis comparing with control root tubes. These results showed that chemical composition of transgenic Rehmanniae Radix were similar to non-transgenic ones, which demonstrated that the medical quality and biosafety of transgenic Rehmanniae Radix were equivalent to non-transgenic material when consumed as traditional Chinese medicinal (TCM.

Farmers as Employers. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of farmers as employers: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with employment of agriculture…

The probability of containment failure by direct containment heating in Zion. Supplement 1

International Nuclear Information System (INIS)

Pilch, M.M.; Allen, M.D.; Stamps, D.W.; Tadios, E.L.; Knudson, D.L.

1994-12-01

Supplement 1 of NUREG/CR-6075 brings to closure the DCH issue for the Zion plant. It includes the documentation of the peer review process for NUREG/CR-6075, the assessments of four new splinter scenarios defined in working group meetings, and modeling enhancements recommended by the working groups. In the four new scenarios, consistency of the initial conditions has been implemented by using insights from systems-level codes. SCDAP/RELAP5 was used to analyze three short-term station blackout cases with Different lead rates. In all three case, the hot leg or surge line failed well before the lower head and thus the primary system depressurized to a point where DCH was no longer considered a threat. However, these calculations were continued to lower head failure in order to gain insights that were useful in establishing the initial and boundary conditions. The most useful insights are that the RCS pressure is-low at vessel breach metallic blockages in the core region do not melt and relocate into the lower plenum, and melting of upper plenum steel is correlated with hot leg failure. THE SCDAP/RELAP output was used as input to CONTAIN to assess the containment conditions at vessel breach. The containment-side conditions predicted by CONTAIN are similar to those originally specified in NUREG/CR-6075

Development of a metallic high integrity container

International Nuclear Information System (INIS)

Haelsig, R.T.

1986-01-01

Nuclear Packaging, a Pacific Nuclear Company, developed a metallic high integrity container (HIC) for the burial of low level radioactive waste. This class of container has received the most extensive review of any burial container licensed in the United States. It is also the first container that has been licensed to meet the requirements of Nuclear Regulatory Commission Regulations 10CFR61. The design and subsequent review considered 300 years corrosion at a depth of 55 feet with no degradation of container structural integrity. The design also included a technical requirement that the container possess a positive vent that would exclude moisture. The alloy that was selected, allows for significant flexibility in container size and configuration which is essential to accommodating the various waste forms. This allowed the development of containers in various sizes and with a variety of closures, that accommodate the internal dimensions of various shipping shields and help minimize radiation exposure during packaging operations. The material used in the metallic container is high corrosion resistant which reduces the need for strict chemical controls at the waste generating facility. This acts to ease the operational requirements in the treatment of several waste streams. The design result is a family of metallic High Integrity Containers (HIC)s that meet all the performance criteria imposed by the regulations, as well as provide a disposable waste container with good transportation efficiency and minimum operational constraints

Plutonium accident resistant container project

International Nuclear Information System (INIS)

Andersen, J.A.

1978-09-01

The PARC (plutonium accident resistant container) project resulted in the design, development, and certification testing of a crashworthy air-transportable plutonium package (shipping container) for certification by the USNRC (Nuclear Regulatory Commission). This PAT-1 (plutonium air transportable) package survives a very severe sequential test program of impact, crush, puncture, slash, burn, and water immersion. There is also an individual hydrostatic pressure test. The package has a payload mass capacity of 2 kg of PuO 2 and a thermal capacity of 25 watts. The design rationale for very high energy absorption (impact, crush, puncture, and slash protection) with residual high-level fire protection, resulted in a reasonably small air-transportable package, advancing the packaging state-of-art. Optimization design iterations were utilized in the areas of impact energy absorption and stress and thermal analysis. Package test results are presented in relation to radioactive materials containment acceptance criteria, shielding and criticality standards

Structural optimization of reinforced concrete container for radioactive wastes

International Nuclear Information System (INIS)

Tamura, M.

1984-01-01

A structural optimization study of reinforced concrete container for transportation and disposal of the low level radioactive waste generated in Brazilian nuclear power plants. The code requires the structural integrity of these containers when subjected to fall from specified height, avoiding environmental contamination. The structural optimization allows material and transportation cost reduction by container wall thickness reduction. The structural analysis is performed by tridimensional mathematical model using finite element method. (Author) [pt

Enhancement of high density polyethylene high integrity containers at a low level radioactive waste disposal site

International Nuclear Information System (INIS)

Sauer, R.E.; Wong, O.P.

1989-01-01

High integrity containers (HIC) made of high density polyethylene (HDPE) have been used for disposal in South Carolina since the late seventies. With the recent definitive position taken by the NRC on the suitability of these containers for disposal, alternative means of assuring the structural integrity of the containers for the long term became necessary. The authors' company has developed an utilized reinforced concrete caissons at the Hanford, Washington site as an additional barrier and structural element to assure the long term high integrity function of the current HDPE HIC's also known as Poly HIC's on the market. This paper outlines the background of the HIC's in question, the NRC positions and ruling, and presents technical bases for the applicability of appropriately designed concrete overpacks to augment the structural integrity of HIC's

CASTOR {sup registered} HAW28M - a high heat load cask for transport and storage of vitrified high level waste containers

Energy Technology Data Exchange (ETDEWEB)

Vossnacke, A.; Klein, K.; Kuehne, B. [GNS Gesellschaft fuer Nuklear-Service mbH/GNB, Essen (Germany)

2004-07-01

Within the German return programme for vitrified high level waste (HLW) from reprocessing at COGEMA and BNFL up to now 39 casks loaded with 28 containers each were transported back to Germany and are stored in the Interim Storage Facility Gorleben (TBL-G) for up to 40 years. For transport and storage in all but one case the GNB casks CASTOR {sup registered} HAW 20/28 CG have been used. This cask type is designed to accommodate 20 or 28 HLW containers with a total thermal power of 45 kW maximum. In the near future, among the high level waste, which has to be returned to Germany, there will be an increasing number of containers of which the heat capacity and radioactive inventory will exceed the technical limits of the CASTOR {sup registered} HAW 20/28 CG. Therefore GNB has started the development of a new cask generation, named CASTOR {sup registered} HAW28M, meeting these future requirements. The CASTOR {sup registered} HAW28M is especially developed for the transport of vitrified residues from France and Great Britain to Germany. It complies with the international regulations for type B packages according to IAEA (International Atomic Energy Agency). It is thus guaranteed that even in case of any accident the cask body and the lid system remain functional and the safe confinement of the radioactive contents remains intact during transport. The CASTOR {sup registered} HAW28M fulfills not only the requirements for transport but also the acceptance criteria of interim storage: radiation shielding, heat dissipation, safe confinement under both normal and hypothetical accident conditions. Storage buildings such as the TBL-G simply support the safety functions of the cask. The challenge for the development results from higher requirements of the technical specification, particularly related to fuel which is reprocessed. As a consequence of the reprocessing of fuel with increased enrichment and burn up, higher heat capacity and sophisticated shielding measures have to be

Container for liquid metal

International Nuclear Information System (INIS)

Abe, Yoshihito; Imazu, Takayuki; Ueda, Sabuo; Ueya, Katsumi.

1980-01-01

Purpose: To arrange a vapor trapping member of a specific structure at the inlet part of a cylindrical gap formed by the inner peripheral surface of the circular opening of a container and the outer peripheral surface of a rotary plug thereby to prevent ingress of vapor in the upper part of the cylindrical gap for a long period of time. Constitution: A sealing material receiving tray is fitted to the container side of the inlet part of a cylindrical gap, and a partition plate is fitted to the rotary plug side. The tray is filled with a sealing material consisting of a large number of steel balls, mesh wire gages and the like, and the partition plate is placed in the tray thereby to carry out sealing of the container. Liquid metal vapor evaporating from the liquid level of the liquid metal adheres to the sealing material to fill the gap, and therefore ingress of vapor to the upper part of the cylindrical gap is prevented, and there is no possibility of causing seal cutting due to the use for a long period. (Sekiya, K.)

Containment

International Nuclear Information System (INIS)

Anon.

1987-01-01

The primary mission of the Containment Group is to ensure that underground nuclear tests are satisfactorily contained. The main goal is the development of sound technical bases for containment-related methodology. Major areas of activity include siting, geologic description, emplacement hole stemming, and phenomenological predictions. Performance results of sanded gypsum concrete plugs on the Jefferson, Panamint, Cornucopia, Labquark, and Bodie events are given. Activities are also described in the following areas: computational capabilities site description, predictive modeling, and cavity-pressure measurement. Containment publications are listed. 8 references

40 CFR 191.13 - Containment requirements.

Science.gov (United States)

2010-07-01

... requirements. (a) Disposal systems for spent nuclear fuel or high-level or transuranic radioactive wastes shall... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Containment requirements. 191.13 Section 191.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION...

Vitamin B12-Containing Plant Food Sources for Vegetarians

Science.gov (United States)

Watanabe, Fumio; Yabuta, Yukinori; Bito, Tomohiro; Teng, Fei

2014-01-01

The usual dietary sources of Vitamin B12 are animal-derived foods, although a few plant-based foods contain substantial amounts of Vitamin B12. To prevent Vitamin B12 deficiency in high-risk populations such as vegetarians, it is necessary to identify plant-derived foods that contain high levels of Vitamin B12. A survey of naturally occurring plant-derived food sources with high Vitamin B12 contents suggested that dried purple laver (nori) is the most suitable Vitamin B12 source presently available for vegetarians. Furthermore, dried purple laver also contains high levels of other nutrients that are lacking in vegetarian diets, such as iron and n-3 polyunsaturated fatty acids. Dried purple laver is a natural plant product and it is suitable for most people in various vegetarian groups. PMID:24803097

Vitamin B12-Containing Plant Food Sources for Vegetarians