WorldWideScience

Sample records for biomedical technology innovation

  1. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  2. Teaching biomedical technology innovation as a discipline.

    Science.gov (United States)

    Yock, Paul G; Brinton, Todd J; Zenios, Stefanos A

    2011-07-20

    Recently, universities in the United States and abroad have developed dedicated educational programs in life science technology innovation. Here, we discuss the two major streams of educational theory and practice that have informed these programs: design thinking and entrepreneurship education. We make the case that the process of innovation for new medical technologies (medtech) is different from that for biopharmaceuticals and outline the challenges and opportunities associated with developing a discipline of medtech innovation.

  3. Technology Transfer and the Innovative Process in Biomedical ...

    African Journals Online (AJOL)

    ... de recherche, de même que les réunions et les conférences. Les scientifiques des pays en voie de développement sont, à différents niveaux, impliqués dans le processus de transfert de technologies. Au cours de l'exécution des activités dessus mentionnés, il peut y avoir l'un ou l'autre élément d'innovation qui intervient ...

  4. Innovations in Biomedical Engineering 2016

    CERN Document Server

    Tkacz, Ewaryst; Paszenda, Zbigniew; Piętka, Ewa

    2017-01-01

    This book presents the proceedings of the “Innovations in Biomedical Engineering IBE’2016” Conference held on October 16–18, 2016 in Poland, discussing recent research on innovations in biomedical engineering. The past decade has seen the dynamic development of more and more sophisticated technologies, including biotechnologies, and more general technologies applied in the area of life sciences. As such the book covers the broadest possible spectrum of subjects related to biomedical engineering innovations. Divided into four parts, it presents state-of-the-art achievements in: • engineering of biomaterials, • modelling and simulations in biomechanics, • informatics in medicine • signal analysis The book helps bridge the gap between technological and methodological engineering achievements on the one hand and clinical requirements in the three major areas diagnosis, therapy and rehabilitation on the other.

  5. Outcomes from a postgraduate biomedical technology innovation training program: the first 12 years of Stanford Biodesign.

    Science.gov (United States)

    Brinton, Todd J; Kurihara, Christine Q; Camarillo, David B; Pietzsch, Jan B; Gorodsky, Julian; Zenios, Stefanos A; Doshi, Rajiv; Shen, Christopher; Kumar, Uday N; Mairal, Anurag; Watkins, Jay; Popp, Richard L; Wang, Paul J; Makower, Josh; Krummel, Thomas M; Yock, Paul G

    2013-09-01

    The Stanford Biodesign Program began in 2001 with a mission of helping to train leaders in biomedical technology innovation. A key feature of the program is a full-time postgraduate fellowship where multidisciplinary teams undergo a process of sourcing clinical needs, inventing solutions and planning for implementation of a business strategy. The program places a priority on needs identification, a formal process of selecting, researching and characterizing needs before beginning the process of inventing. Fellows and students from the program have gone on to careers that emphasize technology innovation across industry and academia. Biodesign trainees have started 26 companies within the program that have raised over $200 million and led to the creation of over 500 new jobs. More importantly, although most of these technologies are still at a very early stage, several projects have received regulatory approval and so far more than 150,000 patients have been treated by technologies invented by our trainees. This paper reviews the initial outcomes of the program and discusses lessons learned and future directions in terms of training priorities.

  6. Innovation strategy management survey of the Chilean biomedical industry. Assessment of windows of opportunities to reduce technological gaps.

    Science.gov (United States)

    Bas, Tomas Gabriel; Oliu, Carolina Alejandra

    2018-04-01

    The convergence of different theories (ie, catch-up effect and windows of opportunities) allows for the interpretation of different "technological innovation gaps" in Chile's biomedical industry. It is common knowledge that Chile has always had an economy almost exclusively based on services, commodities, and mainly in the exploitation of natural resources with low value added. The literature confirms that countries that concentrate their economies on the knowledge, research, development, and commercialization of technology and innovation have a better and more stable growth rate in the medium and long run. The "Asian Tigers" are a good example of this. Analyzing the technological gaps that affect the Chilean biomedical industry, it is possible to find windows of opportunities to catch up. This could allow the country to take its knowledge, skills, and capabilities further, thus enabling Chile to not just depend on its unpredictable natural resources. For the first time, a quantitative diagnosis of the Chilean biomedical industry was made. This study considered the Chilean biomedical industry and its innovation and entrepreneurship environment, taking into account its productive capacities and its potential to make progress in technological innovation and, as a result, dramatically reducing technological gaps through windows of opportunities. Copyright © 2018 John Wiley & Sons, Ltd.

  7. Integrated Biomaterials for Biomedical Technology

    CERN Document Server

    Ramalingam, Murugan; Ramakrishna, Seeram; Kobayashi, Hisatoshi

    2012-01-01

    This cutting edge book provides all the important aspects dealing with the basic science involved in materials in biomedical technology, especially structure and properties, techniques and technological innovations in material processing and characterizations, as well as the applications. The volume consists of 12 chapters written by acknowledged experts of the biomaterials field and covers a wide range of topics and applications.

  8. Technology transfer from biomedical research to clinical practice: measuring innovation performance.

    Science.gov (United States)

    Balas, E Andrew; Elkin, Peter L

    2013-12-01

    Studies documented 17 years of transfer time from clinical trials to practice of care. Launched in 2002, the National Institutes of Health (NIH) translational research initiative needs to develop metrics for impact assessment. A recent White House report highlighted that research and development productivity is declining as a result of increased research spending while the new drugs output is flat. The goal of this study was to develop an expanded model of research-based innovation and performance thresholds of transfer from research to practice. Models for transfer of research to practice have been collected and reviewed. Subsequently, innovation pathways have been specified based on common characteristics. An integrated, intellectual property transfer model is described. The central but often disregarded role of research innovation disclosure is highlighted. Measures of research transfer and milestones of progress have been identified based on the Association of University Technology Managers 2012 performance reports. Numeric milestones of technology transfer are recommended at threshold (top 50%), target (top 25%), and stretch goal (top 10%) performance levels. Transfer measures and corresponding target levels include research spending to disclosure (0.81), patents to start-up (>0.1), patents to licenses (>2.25), and average per license income (>$48,000). Several limitations of measurement are described. Academic institutions should take strategic steps to bring innovation to the center of scholarly discussions. Research on research, particularly on pathways to disclosures, is needed to improve R&D productivity. Researchers should be informed about the technology transfer performance of their institution and regulations should better support innovators.

  9. Innovative technology through selective laser sintering in mechatronics, biomedical engineering and industry

    Directory of Open Access Journals (Sweden)

    Gheorghe Ion GHEORGHE

    2011-03-01

    Full Text Available A new technology, using new materials specially designed for complex geometries,extensively used in research-development and innovation area will be presented in this paper. Evenhighly complex geometries are created directly from 3D CAD data, fully automatically, in just a fewhours and without any tooling. It is a net-shape process, producing parts with high accuracy anddetail resolution, good surface quality and excellent mechanical properties.

  10. Developing biomedical devices design, innovation and protection

    CERN Document Server

    Andreoni, Giuseppe; Colombo, Barbara

    2013-01-01

    During the past two decades incredible progress has been achieved in the instruments and devices used in the biomedical field. This progress stems from continuous scientific research that has taken advantage of many findings and advances in technology made available by universities and industry. Innovation is the key word, and in this context legal protection and intellectual property rights (IPR) are of crucial importance. This book provides students and practitioners with the fundamentals for designing biomedical devices and explains basic design principles. Furthermore, as an aid to the dev

  11. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  12. Innovations in biomedical nanoengineering: nanowell array biosensor

    Science.gov (United States)

    Seo, YoungTae; Jeong, Sunil; Lee, JuKyung; Choi, Hak Soo; Kim, Jonghan; Lee, HeaYeon

    2018-04-01

    Nanostructured biosensors have pioneered biomedical engineering by providing highly sensitive analyses of biomolecules. The nanowell array (NWA)-based biosensing platform is particularly innovative, where the small size of NWs within the array permits extremely profound sensing of a small quantity of biomolecules. Undoubtedly, the NWA geometry of a gently-sloped vertical wall is critical for selective docking of specific proteins without capillary resistances, and nanoprocessing has contributed to the fabrication of NWA electrodes on gold substrate such as molding process, e-beam lithography, and krypton-fluoride (KrF) stepper semiconductor method. The Lee group at the Mara Nanotech has established this NW-based biosensing technology during the past two decades by engineering highly sensitive electrochemical sensors and providing a broad range of detection methods from large molecules (e.g., cells or proteins) to small molecules (e.g., DNA and RNA). Nanosized gold dots in the NWA enhance the detection of electrochemical biosensing to the range of zeptomoles in precision against the complementary target DNA molecules. In this review, we discuss recent innovations in biomedical nanoengineering with a specific focus on novel NWA-based biosensors. We also describe our continuous efforts in achieving a label-free detection without non-specific binding while maintaining the activity and stability of immobilized biomolecules. This research can lay the foundation of a new platform for biomedical nanoengineering systems.

  13. Technological Innovations from NASA

    Science.gov (United States)

    Pellis, Neal R.

    2006-01-01

    The challenge of human space exploration places demands on technology that push concepts and development to the leading edge. In biotechnology and biomedical equipment development, NASA science has been the seed for numerous innovations, many of which are in the commercial arena. The biotechnology effort has led to rational drug design, analytical equipment, and cell culture and tissue engineering strategies. Biomedical research and development has resulted in medical devices that enable diagnosis and treatment advances. NASA Biomedical developments are exemplified in the new laser light scattering analysis for cataracts, the axial flow left ventricular-assist device, non contact electrocardiography, and the guidance system for LASIK surgery. Many more developments are in progress. NASA will continue to advance technologies, incorporating new approaches from basic and applied research, nanotechnology, computational modeling, and database analyses.

  14. Canadian cardiac surgeons' perspectives on biomedical innovation.

    Science.gov (United States)

    Snyman, Gretchen; Tucker, Joseph E L; Cimini, Massimo; Narine, Kishan; Fedak, Paul W M

    2012-01-01

    Barriers to successful innovation can be identified and potentially addressed by exploring the perspectives of key stakeholders in the innovation process. Cardiac surgeons in Canada were surveyed for personal perspectives on biomedical innovation. Quantitative data was obtained by questionnaire and qualitative data via interviews with selected survey participants. Surgeons were asked to self-identify into 1 of 3 categories: "innovator," "early adopter," or "late adopter," and data were compared between groups. Most surgeons viewed innovation favourably and this effect was consistent irrespective of perceived level of innovativeness. Key barriers to the innovation pathway were identified: (1) support from colleagues and institutions; (2) Canada's health system; (3) sufficient investment capital; and (4) the culture of innovation within the local environment. Knowledge of the innovation process was perceived differently based on self-reported innovativeness. The majority of surgeons did not perceive themselves as having the necessary knowledge and skills to effectively translate innovative ideas to clinical practice. In general, responses indicate support for implementation of leadership and training programs focusing on the innovation process in an effort to prepare surgeons and enhance their ability to successfully innovate and translate new therapies. The perspectives of cardiac surgeons provide an intriguing portal into the challenges and opportunities for healthcare innovation in Canada. Copyright © 2012 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

  15. Biomedical engineering: A platform for research and innovation in ultrasound

    Science.gov (United States)

    Holland, Christy K.

    2004-05-01

    An undergraduate or graduate degree in biomedical engineering prepares students to solve problems at the interface between engineering and medicine. Biomedical engineering encompasses evolving areas such as advanced medical imaging for diagnosis and treatment of disease, tissue engineering for designing and manufacturing biological implants for damaged or diseased tissues and organs, and bioinformatics for determining which genes play a major role in health and disease. Biomedical engineering academic programs produce graduates with the ability to pursue successful careers in the biomedical device industry or to obtain advanced degrees leading to careers in biomedical engineering research, medicine, law or business. Biomedical engineering majors take courses in biology, anatomy, physics, chemistry, engineering, mathematics and medical product design and value life-long learning. Students learn to work effectively in interdisciplinary teams comprised of individuals with diverse social, cultural and technical backgrounds. Biomedical engineering is becoming increasingly important in imaging and image-guided research. Some examples of innovative ultrasound technology under development are ultrasound devices to accelerate the dissolution of blood clots, advanced surgical instruments with ultrasound guidance and ultrasound contrast agents for targeted drug delivery. Biomedical engineering is a great career choice for technically minded individuals who endeavor to work on applied problems that are medically relevant.

  16. Advances in electronic-nose technologies developed for biomedical applications

    Science.gov (United States)

    Dan Wilson; Manuela. Baietto

    2011-01-01

    The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and...

  17. Biomedical engineering frontier research and converging technologies

    CERN Document Server

    Jun, Ho-Wook; Shin, Jennifer; Lee, SangHoon

    2016-01-01

    This book provides readers with an integrative overview of the latest research and developments in the broad field of biomedical engineering. Each of the chapters offers a timely review written by leading biomedical engineers and aims at showing how the convergence of scientific and engineering fields with medicine has created a new basis for practically solving problems concerning human health, wellbeing and disease. While some of the latest frontiers of biomedicine, such as neuroscience and regenerative medicine, are becoming increasingly dependent on new ideas and tools from other disciplines, the paradigm shift caused by technological innovations in the fields of information science, nanotechnology, and robotics is opening new opportunities in healthcare, besides dramatically changing the ways we actually practice science. At the same time, a new generation of engineers, fluent in many different scientific “languages,” is creating entirely new fields of research that approach the “old” questions f...

  18. NIH/NSF accelerate biomedical research innovations

    Science.gov (United States)

    A collaboration between the National Science Foundation and the National Institutes of Health will give NIH-funded researchers training to help them evaluate their scientific discoveries for commercial potential, with the aim of accelerating biomedical in

  19. Launching technological innovations

    DEFF Research Database (Denmark)

    Talke, Katrin; Salomo, Søren

    2009-01-01

    have received less attention. This study considers the interdependencies between strategic, internally and externally, directed tactical launch activities and investigates both direct and indirect performance effects. The analysis is based upon data from 113 technological innovations launched...

  20. Advances in electronic-nose technologies developed for biomedical applications.

    Science.gov (United States)

    Wilson, Alphus D; Baietto, Manuela

    2011-01-01

    The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry.

  1. Advances in Electronic-Nose Technologies Developed for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Alphus D. Wilson

    2011-01-01

    Full Text Available The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry.

  2. Applications of computational intelligence in biomedical technology

    CERN Document Server

    Majernik, Jaroslav; Pancerz, Krzysztof; Zaitseva, Elena

    2016-01-01

    This book presents latest results and selected applications of Computational Intelligence in Biomedical Technologies. Most of contributions deal with problems of Biomedical and Medical Informatics, ranging from theoretical considerations to practical applications. Various aspects of development methods and algorithms in Biomedical and Medical Informatics as well as Algorithms for medical image processing, modeling methods are discussed. Individual contributions also cover medical decision making support, estimation of risks of treatments, reliability of medical systems, problems of practical clinical applications and many other topics  This book is intended for scientists interested in problems of Biomedical Technologies, for researchers and academic staff, for all dealing with Biomedical and Medical Informatics, as well as PhD students. Useful information is offered also to IT companies, developers of equipment and/or software for medicine and medical professionals.  .

  3. Biomedical applications using low temperature plasma technology

    International Nuclear Information System (INIS)

    Dai Xiujuan; Jiang Nan

    2006-01-01

    Low temperature plasma technology and biomedicine are two different subjects, but the combination of the two may play a critical role in modern science and technology. The 21 st century is believed to be a biotechnology century. Plasma technology is becoming a widely used platform for the fabrication of biomaterials and biomedical devices. In this paper some of the technologies used for material surface modification are briefly introduced. Some biomedical applications using plasma technology are described, followed by suggestions as to how a bridge between plasma technology and biomedicine can be built. A pulsed plasma technique that is used for surface functionalization is discussed in detail as an example of this kind of bridge or combination. Finally, it is pointed out that the combination of biomedical and plasma technology will be an important development for revolutionary 21st century technologies that requires different experts from different fields to work together. (authors)

  4. Biomedical sensor technologies on the platform of mobile phones

    Science.gov (United States)

    Liu, Lin; Liu, Jing

    2011-06-01

    Biomedical sensors have been widely used in various areas of biomedical practices, which play an important role in disease detection, diagnosis, monitoring, treatment, health management, and so on. However, most of them and their related platforms are generally not easily accessible or just too expensive or complicated to be kept at home. As an alternative, new technologies enabled from the mobile phones are gradually changing such situations. As can be freely available to almost everyone, mobile phone offers a unique way to improve the conventional medical care through combining with various biomedical sensors. Moreover, the established systems will be both convenient and low cost. In this paper, we present an overview on the state-of-art biomedical sensors, giving a brief introduction of the fundamental principles and showing several new examples or concepts in the area. The focus was particularly put on interpreting the technical strategies to innovate the biomedical sensor technologies based on the platform of mobile phones. Some challenging issues, including feasibility, usability, security, and effectiveness, were discussed. With the help of electrical and mechanical technologies, it is expected that a full combination between the biomedical sensors and mobile phones will bring a bright future for the coming pervasive medical care.

  5. Biomedical Optical Imaging Technologies Design and Applications

    CERN Document Server

    2013-01-01

    This book provides an introduction to design of biomedical optical imaging technologies and their applications. The main topics include: fluorescence imaging, confocal imaging, micro-endoscope, polarization imaging, hyperspectral imaging, OCT imaging, multimodal imaging and spectroscopic systems. Each chapter is written by the world leaders of the respective fields, and will cover: principles and limitations of optical imaging technology, system design and practical implementation for one or two specific applications, including design guidelines, system configuration, optical design, component requirements and selection, system optimization and design examples, recent advances and applications in biomedical researches and clinical imaging. This book serves as a reference for students and researchers in optics and biomedical engineering.

  6. Interdisciplinary innovations in biomedical and health informatics graduate education.

    Science.gov (United States)

    Demiris, G

    2007-01-01

    Biomedical and health informatics (BHI) is a rapidly growing domain that relies on the active collaboration with diverse disciplines and professions. Educational initiatives in BHI need to prepare students with skills and competencies that will allow them to function within and even facilitate interdisciplinary teams (IDT). This paper describes an interdisciplinary educational approach introduced into a BHI graduate curriculum that aims to prepare informatics researchers to lead IDT research. A case study of the "gerontechnology" research track is presented which highlights how the curriculum fosters collaboration with and understanding of the disciplines of Nursing, Engineering, Computer Science, and Health Administration. Gerontechnology is a new interdisciplinary field that focuses on the use of technology to support aging. Its aim is to explore innovative ways to use information technology and develop systems that support independency and increase quality of life for senior citizens. As a result of a large research group that explores "smart home" technologies and the use of information technology, we integrated this new domain into the curriculum providing a platform for computer scientists, engineers, nurses and physicians to explore challenges and opportunities with our informatics students and faculty. The interdisciplinary educational model provides an opportunity for health informatics students to acquire the skills for communication and collaboration with other disciplines. Numerous graduate and postgraduate students have already participated in this initiative. The evaluation model of this approach is presented. Interdisciplinary educational models are required for health informatics graduate education. Such models need to be innovative and reflect the needs and trends in the domains of health care and information technology.

  7. National Strategies for Technological Innovation

    Science.gov (United States)

    Rossini, Frederick; Bozeman, Barry

    1977-01-01

    Considers the implications of the technological innovation literature for possible national strategies for innovation. Sketches highly generalized innovation strategies for nations at various levels of technological development. (Author/IRT)

  8. Biomedical device innovation methodology: applications in biophotonics

    Science.gov (United States)

    Beswick, Daniel M.; Kaushik, Arjun; Beinart, Dylan; McGarry, Sarah; Yew, Ming Khoon; Kennedy, Brendan F.; Maria, Peter Luke Santa

    2018-02-01

    The process of medical device innovation involves an iterative method that focuses on designing innovative, device-oriented solutions that address unmet clinical needs. This process has been applied to the field of biophotonics with many notable successes. Device innovation begins with identifying an unmet clinical need and evaluating this need through a variety of lenses, including currently existing solutions for the need, stakeholders who are interested in the need, and the market that will support an innovative solution. Only once the clinical need is understood in detail can the invention process begin. The ideation phase often involves multiple levels of brainstorming and prototyping with the aim of addressing technical and clinical questions early and in a cost-efficient manner. Once potential solutions are found, they are tested against a number of known translational factors, including intellectual property, regulatory, and reimbursement landscapes. Only when the solution matches the clinical need, the next phase of building a "to market" strategy should begin. Most aspects of the innovation process can be conducted relatively quickly and without significant capital expense. This white paper focuses on key points of the medical device innovation method and how the field of biophotonics has been applied within this framework to generate clinical and commercial success.

  9. Technology, Innovation and Knowledge

    DEFF Research Database (Denmark)

    Andersson, Ulf; Dasi, Angels; Mudambi, Ram

    2016-01-01

    The relevance of ideas is at the core of the IB field and has been captured in concepts like technology, innovation and knowledge. While these concepts have evolved over the last decades, the point that the ideas and the international connectivity are central for IB remains genuine. This paper...... is an attempt to take stock of the evolution of the concepts technology, innovation and knowledge in IB literature along the past five decades with a particular focus on the role of the Columbia Journal of World Business (CJWB) and the Journal of World Business (JWB) in this evolution. Likewise, our objective...

  10. The impact of biomedical innovation on longevity and health

    Directory of Open Access Journals (Sweden)

    Frank R Lichtenberg

    2015-03-01

    Full Text Available Many authors have expressed the view that a substantial portion of recent gains in longevity and health is due to biomedical research and innovation. This article describes the methodologies and findings of a number of studies based on observational data that have sought to measure the impact of biomedical innovation on the longevity and health of Americans and other populations during recent decades. Most of these studies have examined the impact of innovation in pharmaceuticals, the most research-intensive medical good or service. Two measures of medical innovation that have been used are the mean vintage of the medical goods or procedures used by an individual or population, and the number of distinct products (e.g. drugs available for treating a condition. Longevity (e.g. time till death is the health outcome that has been analyzed the most, but several studies have studied the impact of medical (i.e. pharmaceutical innovation on the ability of people to work or engage in activities of daily living. Some studies have been based on cross-sectional patient-level data. Others have been based on longitudinal, region-level data; they have investigated whether regions (e.g. states undergoing more rapid medical innovation have exhibited larger improvements in health. And some studies have been based on longitudinal, disease-level data; they have investigated whether the medical conditions undergoing more rapid innovation have exhibited larger gains in health outcomes. Innovation related to some specific major diseases (e.g. cardiovascular disease and cancer has been investigated, but the overall impact of innovation related to other major diseases (e.g. diabetes has not.These studies provide considerable support for the hypothesis that a substantial portion of recent gains in longevity and health is due to biomedical research and innovation. It would be desirable to apply these methods to data from developing countries.

  11. 2006 Campus Technology Innovators

    Science.gov (United States)

    Campus Technology, 2006

    2006-01-01

    This article features the winners of this year's "Campus Technology Innovator" competition. The winners are: (1) Drexel University, Pennsylvania (outsourcing); (2) Darton College, Georgia (3D); (3) Minnesota State Colleges and Universities (ePortfolios); (4) University of Michigan (the Web); (5) University of Tennessee College of…

  12. Physician entrepreneur: lessons learned in raising capital for biomedical innovation.

    Science.gov (United States)

    Soleimani, Farzad; Kharabi, Darius G

    2010-04-01

    The funding landscape for medical devices is becoming increasingly difficult and complex. The purpose of this article is to provide the physician entrepreneur with a review of the main sources of capital available to fund the development and commercialization of biomedical innovations, and to highlight some of the important nuances of these funding sources that the physician entrepreneur should consider. The article examines the benefits and drawbacks of funding from venture capital firms, grants, friends and family, angel investors, incubators and industry partners from the perspective of the physician entrepreneur, and provides some key points to consider when selecting and working with an investor. The article's recommendations include: in selecting an investor, seek those whose investment thesis, areas of expertise and desired company stage (early vs. late) match the technology and the objectives of the company. In negotiating with an investor, an effective way to increase the company's valuation is to bring multiple bidders to the table. In working with an investor, respect junior staff members as much as senior partners and be wary of conflicts of interest with venture capital entrepreneurs-in-residence. There are both advantages and disadvantages to each of the funding sources examined here, and the choice of a funding partner depends significantly on the stage of development (in both corporate and technology) of the physician entrepreneur's venture and the role that the physician entrepreneur desires to play in it.

  13. Introduction to biomedical engineering technology

    CERN Document Server

    Street, Laurence J

    2011-01-01

    IntroductionHistory of Medical DevicesThe Role of Biomedical Engineering Technologists in Health CareCharacteristics of Human Anatomy and Physiology That Relate to Medical DevicesSummaryQuestionsDiagnostic Devices: Part OnePhysiological Monitoring SystemsThe HeartSummaryQuestionsDiagnostic Devices: Part TwoCirculatory System and BloodRespiratory SystemNervous SystemSummaryQuestionsDiagnostic Devices: Part ThreeDigestive SystemSensory OrgansReproductionSkin, Bone, Muscle, MiscellaneousChapter SummaryQuestionsDiagnostic ImagingIntroductionX-RaysMagnetic Resonance Imaging ScannersPositron Emissio

  14. Crowdsourcing biomedical research: leveraging communities as innovation engines.

    Science.gov (United States)

    Saez-Rodriguez, Julio; Costello, James C; Friend, Stephen H; Kellen, Michael R; Mangravite, Lara; Meyer, Pablo; Norman, Thea; Stolovitzky, Gustavo

    2016-07-15

    The generation of large-scale biomedical data is creating unprecedented opportunities for basic and translational science. Typically, the data producers perform initial analyses, but it is very likely that the most informative methods may reside with other groups. Crowdsourcing the analysis of complex and massive data has emerged as a framework to find robust methodologies. When the crowdsourcing is done in the form of collaborative scientific competitions, known as Challenges, the validation of the methods is inherently addressed. Challenges also encourage open innovation, create collaborative communities to solve diverse and important biomedical problems, and foster the creation and dissemination of well-curated data repositories.

  15. Strategy of technology and innovation

    International Nuclear Information System (INIS)

    Kim, Yeon Min

    1998-10-01

    This book introduces strategy of technology and innovation which includes design and development of strategy of technology, performance of strategy of technology and building and practice of strategy of development. The contents of this book are form of industrial innovation, act in strategy, advantage of technical innovation, new perspective of studying and innovation, alliance with competitor, cost of transmission and innovation, learning cycle of new product and power of consistency of product.

  16. Biomedical technology prosperity game{trademark}

    Energy Technology Data Exchange (ETDEWEB)

    Berman, M.; Boyack, K.W.; Wesenberg, D.L.

    1996-07-01

    Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Biomedical Technology Prosperity Game{trademark} conducted under the sponsorship of Sandia National Laboratories, the Defense Advanced Research Projects Agency, and the Koop Foundation, Inc. Players were drawn from all stakeholders involved in biomedical technologies including patients, hospitals, doctors, insurance companies, legislators, suppliers/manufacturers, regulators, funding organizations, universities/laboratories, and the legal profession. The primary objectives of this game were to: (1) Identify advanced/critical technology issues that affect the cost and quality of health care. (2) Explore the development, patenting, manufacturing and licensing of needed technologies that would decrease costs while maintaining or improving quality. (3) Identify policy and regulatory changes that would reduce costs and improve quality and timeliness of health care delivery. (4) Identify and apply existing resources and facilities to develop and implement improved technologies and policies. (5) Begin to develop Biomedical Technology Roadmaps for industry and government cooperation. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning biomedical issues. Significant progress was made in the roadmapping of key areas in the biomedical technology field.

  17. Innovative technology demonstration

    International Nuclear Information System (INIS)

    Anderson, D.B.; Luttrell, S.P.; Hartley, J.N.; Hinchee, R.

    1992-04-01

    The Innovative Technology Demonstration (ITD) program at Tinker Air Force Base (TAFB), Oklahoma City, Oklahoma, will demonstrate the overall utility and effectiveness of innovative technologies for site characterization, monitoring, and remediation of selected contaminated test sites. The current demonstration test sites include a CERCLA site on the NPL list, located under a building (Building 3001) that houses a large active industrial complex used for rebuilding military aircraft, and a site beneath and surrounding an abandoned underground tank vault used for storage of jet fuels and solvents. The site under Building 3001 (the NW Test Site) is contaminated with TCE and Cr +6 ; the site with the fuel storage vault (the SW Tanks Site) is contaminated with fuels, BTEX and TCE. These sites and others have been identified for cleanup under the Air Force's Installation Restoration Program (IRP). This document describes the demonstrations that have been conducted or are planned for the TAFB

  18. Smart space technology innovations

    CERN Document Server

    Chen, Mu-Yen

    2013-01-01

    Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

  19. Branching innovation, recombinant innovation, and endogenous technological transitions

    NARCIS (Netherlands)

    Frenken, K.; Izquierdo, L.; Zeppini, P.

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  20. Innovative technology demonstrations

    International Nuclear Information System (INIS)

    Anderson, D.B.; Luttrell, S.P.; Hartley, J.N.

    1992-08-01

    Environmental Management Operations (EMO) is conducting an Innovative Technology Demonstration Program for Tinker Air Force Base (TAFB). Several innovative technologies are being demonstrated to address specific problems associated with remediating two contaminated test sites at the base. Cone penetrometer testing (CPT) is a form of testing that can rapidly characterize a site. This technology was selected to evaluate its applicability in the tight clay soils and consolidated sandstone sediments found at TAFB. Directionally drilled horizontal wells was selected as a method that may be effective in accessing contamination beneath Building 3001 without disrupting the mission of the building, and in enhancing the extraction of contamination both in ground water and in soil. A soil gas extraction (SGE) demonstration, also known as soil vapor extraction, will evaluate the effectiveness of SGE in remediating fuels and TCE contamination contained in the tight clay soil formations surrounding the abandoned underground fuel storage vault located at the SW Tanks Site. In situ sensors have recently received much acclaim as a technology that can be effective in remediating hazardous waste sites. Sensors can be useful for determining real-time, in situ contaminant concentrations during the remediation process for performance monitoring and in providing feedback for controlling the remediation process. Following the SGE demonstration, the SGE system and SW Tanks test site will be modified to demonstrate bioremediation as an effective means of degrading the remaining contaminants in situ. The bioremediation demonstration will evaluate a bioventing process in which the naturally occurring consortium of soil bacteria will be stimulated to aerobically degrade soil contaminants, including fuel and TCE, in situ

  1. International Conference for Innovation in Biomedical Engineering and Life Sciences

    CERN Document Server

    Usman, Juliana; Mohktar, Mas; Ahmad, Mohd

    2016-01-01

    This volumes presents the proceedings of ICIBEL 2015, organized by the Centre for Innovation in Medical Engineering (CIME) under Innovative Technology Research Cluster, University of Malaya. It was held in Kuala Lumpur, Malaysia, from 6-8 December 2015. The ICIBEL 2015 conference promotes the latest researches and developments related to the integration of the Engineering technology in medical fields and life sciences. This includes the latest innovations, research trends and concerns, challenges and adopted solution in the field of medical engineering and life sciences. .

  2. Innovative technology demonstrations

    International Nuclear Information System (INIS)

    Anderson, D.B.; Hartley, J.N.; Luttrell, S.P.

    1992-04-01

    Currently, several innovative technologies are being demonstrated at Tinker Air Force Base (TAFB) to address specific problems associated with remediating two contaminated test sites at the base. Cone penetrometer testing (CPT) is a form of testing that can rapidly characterize a site. This technology was selected to evaluate its applicability in the tight clay soils and consolidated sandstone sediments found at TAFB. Directionally drilled horizontal wells have been successfully installed at the US Department of Energy's (DOE) Savannah River Site to test new methods of in situ remediation of soils and ground water. This emerging technology was selected as a method that may be effective in accessing contamination beneath Building 3001 without disrupting the mission of the building, and in enhancing the extraction of contamination both in ground water and in soil. A soil gas extraction (SGE) demonstration, also known as soil vapor extraction, will evaluate the effectiveness of SGE in remediating fuels and TCE contamination contained in the tight clay soil formations surrounding the abandoned underground fuel storage vault located at the SW Tanks Site. In situ sensors have recently received much acclaim as a technology that can be effective in remediating hazardous waste sites. Sensors can be useful for determining real-time, in situ contaminant concentrations during the remediation process for performance monitoring and in providing feedback for controlling the remediation process. A demonstration of two in situ sensor systems capable of providing real-time data on contamination levels will be conducted and evaluated concurrently with the SGE demonstration activities. Following the SGE demonstration, the SGE system and SW Tanks test site will be modified to demonstrate bioremediation as an effective means of degrading the remaining contaminants in situ

  3. Innovative Separations Technologies

    Energy Technology Data Exchange (ETDEWEB)

    J. Tripp; N. Soelberg; R. Wigeland

    2011-05-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  4. Innovative Separations Technologies

    International Nuclear Information System (INIS)

    Tripp, J.; Soelberg, N.; Wigeland, R.

    2011-01-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR and D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  5. Blockchain distributed ledger technologies for biomedical and health care applications.

    Science.gov (United States)

    Kuo, Tsung-Ting; Kim, Hyeon-Eui; Ohno-Machado, Lucila

    2017-11-01

    To introduce blockchain technologies, including their benefits, pitfalls, and the latest applications, to the biomedical and health care domains. Biomedical and health care informatics researchers who would like to learn about blockchain technologies and their applications in the biomedical/health care domains. The covered topics include: (1) introduction to the famous Bitcoin crypto-currency and the underlying blockchain technology; (2) features of blockchain; (3) review of alternative blockchain technologies; (4) emerging nonfinancial distributed ledger technologies and applications; (5) benefits of blockchain for biomedical/health care applications when compared to traditional distributed databases; (6) overview of the latest biomedical/health care applications of blockchain technologies; and (7) discussion of the potential challenges and proposed solutions of adopting blockchain technologies in biomedical/health care domains. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  6. Recombinant innovation and endogenous technological transitions

    NARCIS (Netherlands)

    Frenken, K.; Izquierdo, L.R.; Zeppini, P.

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  7. INNOVATIVE TECHNOLOGY VERIFICATION REPORT " ...

    Science.gov (United States)

    The RemediAidTm Total Petroleum Hydrocarbon Starter Kit (RemediAidTm kit) developed by CHEMetries, Inc. (CHEMetrics), and AZUR Environmental Ltd was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose of the demonstration was to collect reliable performance and cost data for the RemediAid Tm kit and six other field measurement devices for total petroleum hydrocarbons (TPH) in soil. In addition to assessing ease of device operation, the key objectives of the demonstration included determining the (1) method detection limit, (2) accuracy and precision, (3) effects of interferents and soil moisture content on TPH measurement, (4) sample throughput, and (5) TPH measurement costs for each device. The demonstration involved analysis of both performance evaluation samples and environmental samples collected in five areas contaminated with gasoline, diesel, lubricating oil, or other petroleum products. The performance and cost results for a given field measurement device were compared to those for an off-site laboratory reference method,

  8. Innovation in nuclear technology

    International Nuclear Information System (INIS)

    Bertel, E.

    2007-01-01

    Innovation has been a driving force for the success of nuclear energy and remains essential for its future. For the continued safe and economically effective operation and maintenance of existing nuclear systems, and to meet the goals set out by projects aiming at designing and implementing advanced systems for the future, efficient innovation systems are needed. Consequently, analysing innovation systems is essential to understand their characteristics and enhance their performance in the nuclear sector. Lessons learnt from innovation programmes that have already been completed can help enhance the effectiveness of future programmes. The analysis of past experience provides a means for identifying causes of failure as well as best practices. Although national and local conditions are important factors, the main drivers for the success of innovative endeavors are common to all countries. Cooperation and coordination among the various actors are major elements promoting success. All interested stakeholders, including research organisations, industrial actors, regulators and civil society, have a role to play in supporting the success of innovation, but governments are an essential trigger, especially for projects with long durations and very ambitious objectives. Governments have a major role to play in promoting innovation because they are responsible for the overall national energy policy which sets the stage for the eventual deployment of innovative products and processes. Moreover, only governments can create the stable legal and regulatory framework favourable to the undertaking and successful completion of innovation programmes. International organisations such as the NEA may help enhance the effectiveness of national policies and innovation programmes by providing a forum for exchanging information, facilitating multilateral collaboration and joint endeavors, and offering technical support for the management of innovative programmes

  9. Technology Development and Innovation | Wind | NREL

    Science.gov (United States)

    Technology Development and Innovation Technology Development and Innovation Technology Development Technology Center (NWTC) supports efforts to reduce bird and bat fatalities at wind energy projects and photo of wind turbines at the National Wind Technology Center. Wildlife technology research and

  10. Technological literacy and innovation education

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    Lately, in Denmark and internationally, there has been an increased focus on welfare technology and innovation. The Danish healthcare system is being fundamentally restructured and re-formed, the health professions are dealing with increased speed on the introductions of new political strategies...... on innovation education and educational activities fostering technological literacy. While focus on technological literacy has often (historically) taken a functionalist direction, and mainly been related to ICT and development of non- vocational curricula, more recent developments of approaches...... to technological literacy emphasizes profession oriented relational technological literacy. Furthermore, new definitions of 21st century competencies and skills emphasize creative learning and innovation skills and competencies as central ingredients in the 21st century labor market, and call for innovation...

  11. Indigenous Technological Innovation : Capability and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Indigenous Technological Innovation : Capability and Competitiveness in China's ... IDRC and key partners will showcase critical work on adaptation and ... Call for new OWSD Fellowships for Early Career Women Scientists now open.

  12. European innovation and technology development

    International Nuclear Information System (INIS)

    Johnson, R.W.

    1991-01-01

    The promotion of technological innovation by European national governments and the EC in pursuit of both increased recovery and the anchoring of technology in supply, manufacturing and service sector companies has been a feature of the strategic involvement by European states in exploration and production research and development. This paper summaries past trends in this activity and reviews the targets for future industry innovation which will enable European (primarily the North Sea) production to be sustained for a further generation

  13. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    Hvelplund, Frede Kloster; Lund, Henrik; Sukkumnoed, Decharut

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  14. Technological Innovations in Forensic Genetics

    DEFF Research Database (Denmark)

    Wienroth, Matthias; Morling, Niels; Williams, Robin

    2014-01-01

    This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology...... expectations, social identities, and legal institutions. It also considers how imagined and actual uses of forensic genetic technologies are entangled with assertions about social order, affirmations of common values and civil rights, and promises about security and justice. Our comments seek to encourage...

  15. Group Innovation Ability of Agricultural Technological Innovation Strategic Alliance

    Institute of Scientific and Technical Information of China (English)

    Chishun; MA; Jintian; YU

    2013-01-01

    Agricultural technological innovation strategic alliance, as an important form of strategic alliance, has steadily strengthened the collaborative management among organizations and raised competitive power with the backing of improved group innovation ability. This article studies innovation ability from individual innovation ability to the group innovation ability. Firstly, basic connotation of group innovation ability is to be concluded through the comparison of individual and group innovation ability. Secondly, evaluation index system is to be established based on the influencing factors of the group innovation ability of agricultural technological innovation strategic alliance and evaluation is based on three dimensions, namely organization technological innovation ability, alliance collaborative innovation ability as well as innovation environment. Furthermore, basic methods for promoting the group innovation ability of alliance are to be proposed.

  16. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  17. Innovate or imitate? Behavioural technological change

    NARCIS (Netherlands)

    Hommes, C.; Zeppini, P.

    2013-01-01

    We propose a behavioural model of technological change with evolutionary switching between boundedly rational costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic

  18. Innovate or imitate? Behavioural technological change

    NARCIS (Netherlands)

    Hommes, C.; Zeppini, P.

    2014-01-01

    We propose a behavioural model of technological change with evolutionary switching between costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic substitutes and

  19. Innovative technologies in primary school

    Directory of Open Access Journals (Sweden)

    Lyzentsova L.A.

    2017-01-01

    Full Text Available this article describes innovative technologies during the classes in elementary school. The author has noted that the introduction of new technology promotes the development of education and the student's desire to learn and fosters independence, initiative and tolerance.

  20. Innovative technologies in business hotels

    Directory of Open Access Journals (Sweden)

    Анастасия Игоревна Сидоренко

    2015-10-01

    Full Text Available The article analyzes the state and prospects of development of the hotel industry sector in Ukraine, aimed at a business audience that is constantly increasing; the need for the development and implementation of innovative technologies in a business hotel, because in the long term they will provide improving the service levels, the occupancy rate of the hotel rooms and competitiveness. An expediency of introducing innovative wireless LED lighting system in the rooms of business hotels is proved

  1. Science, Technology, and Innovation Policy

    DEFF Research Database (Denmark)

    Lundvall, Bengt-Åke; Borrás, Susana

    2005-01-01

    This chapter is about what governments have done and could do to promote the production, diffusion, and use of scientific and technical knowledge in order to realize national objectives. We begin the chapter with "story-telling" based on sketchy historical facts. The aim of  the two stories...... is to illustrate that innovation policy covers a wide set of issues that have been on the agenda far back in history while still remaining important today. We move on to sketch the history of innovation policy, splitting it up into the three ideal types: science, technology, and innovation policy. We use OECD...

  2. Technology transfer and innovation

    International Nuclear Information System (INIS)

    Ashworth, Graham; Thornton, Anna

    1987-01-01

    The aims of the conference were advice, assistance and action for all those with technology to licence or inventions to patent, and for people seeking financial help and advice. There was a free exchange of ideas and information. Of the forty or so papers collected together, many are concerned with the financial aspects of new ventures, others look at technology transfer from academic institutes and schemes which support technological problems. One paper on fast reactor collaboration in Europe, is indexed separately. (U.K.)

  3. Innovative Technologies in Transportation

    Science.gov (United States)

    2004-12-01

    An historical overview of the transportation infrastructure of the United States and Texas is provided. Data for trends in transportation is analyzed and projections for the future are postulated. A survey of current technologies in transportation is...

  4. An information technology emphasis in biomedical informatics education.

    Science.gov (United States)

    Kane, Michael D; Brewer, Jeffrey L

    2007-02-01

    Unprecedented growth in the interdisciplinary domain of biomedical informatics reflects the recent advancements in genomic sequence availability, high-content biotechnology screening systems, as well as the expectations of computational biology to command a leading role in drug discovery and disease characterization. These forces have moved much of life sciences research almost completely into the computational domain. Importantly, educational training in biomedical informatics has been limited to students enrolled in the life sciences curricula, yet much of the skills needed to succeed in biomedical informatics involve or augment training in information technology curricula. This manuscript describes the methods and rationale for training students enrolled in information technology curricula in the field of biomedical informatics, which augments the existing information technology curriculum and provides training on specific subjects in Biomedical Informatics not emphasized in bioinformatics courses offered in life science programs, and does not require prerequisite courses in the life sciences.

  5. Technological Innovation in Primary Education

    Directory of Open Access Journals (Sweden)

    Luisana Sleny López Alvarado

    2018-05-01

    Full Text Available The purpose of this essay is to reflect on technological innovation in Primary Education. In this idea, information processing was used to support the analysis of the theoretical approaches related to the relevance of education that is based on a significant pedagogical practice capable of developing the capacities and interests, so that they can appropriate the global and local content in the vision of access to information, considering social opportunities. The restructuring to which education has been subjected has been influenced by advances in science, technology and the demands of a complex, dynamic and uncertain society in the processes of educational innovation, which involves the introduction of something new in education. the educational system, modifying its teaching-learning structures through the incorporation of Information and Communication Technologies (ICT in the curricular design of primary education in its intention to train for incursion into science and technology from use of a wide range of didactic resources that lead to pedagogical innovation. It was concluded that technological innovation in the educational praxis of primary education, requires in addition to the vocation of service, to study the new didactic paradigms to display their reflective capacity and assume the commitment to acquire digital literacy to assume the requirements of a knowledge society which is increasingly globalized.

  6. Retail innovation technologies

    Directory of Open Access Journals (Sweden)

    Vasile Dinu

    2015-05-01

    Full Text Available Commerce, as an important industry of any national economy, is a socially important complex of activities, which has to correspond to the general level of development and civilization of the community it serves. Considering this, the essential priorities commercial activity will turn to are represented by the increased power that consumers get through better informing, the assurance of a better connection between retail and innovation, more equitable and sustainable commercial relationships along the purchase chain, the improvement of retail services accessibility, the creation of a better work environment through the better correlation between employers’ needs and employers’ competences. Retail is permanently adapting to the changing market conditions, remaining a high competitive sector. Modern buyer is hurried, more mobile, better informed; more concerned about health, environment, comfort and aesthetics issues, more demanding in terms of quality and level of customization. Population migration, urbanization, and ageing, its absolute decrease, the average households size reduction, are all demographic trends to which retail must provide an appropriate answer. Retail businesses operating costs tend to increase, while buyers are warier under the impact of the global financial crisis, which will put additional pressure on profit margins.

  7. Innovation investment area: Technology summary

    International Nuclear Information System (INIS)

    1994-03-01

    The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation

  8. Innovation investment area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  9. [Innovative technology and blood safety].

    Science.gov (United States)

    Begue, S; Morel, P; Djoudi, R

    2016-11-01

    If technological innovations are not enough alone to improve blood safety, their contributions for several decades in blood transfusion are major. The improvement of blood donation (new apheresis devices, RFID) or blood components (additive solutions, pathogen reduction technology, automated processing of platelets concentrates) or manufacturing process of these products (by automated processing of whole blood), all these steps where technological innovations were implemented, lead us to better traceability, more efficient processes, quality improvement of blood products and therefore increased blood safety for blood donors and patients. If we are on the threshold of a great change with the progress of pathogen reduction technology (for whole blood and red blood cells), we hope to see production of ex vivo red blood cells or platelets who are real and who open new conceptual paths on blood safety. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  10. Business Models and Technological Innovation

    OpenAIRE

    Baden-Fuller, Charles; Haefliger, Stefan

    2013-01-01

    Business models are fundamentally linked with technological innovation, yet the business model construct is essentially separable from technology. We define the business model as a system that solves the problem of identifying who is (or are) the customer(s), engaging with their needs, delivering satisfaction, and monetizing the value. The framework depicts the business model system as a model containing cause and effect relationships, and it provides a basis for classification. We formulate ...

  11. Governing Science, Technology and Innovation:

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2007-01-01

    Abstract: As an object of public management, Science, Technology and Innovation (STI) is characterised by a high level of uncertainty and complexity. The paper argues that to cope with the phenomenon of STI as a coherent area of policy formulation and regulation, a balancing of rational-, reflexi...

  12. Innovative Technologies in Science Teaching

    Science.gov (United States)

    Guerra, Cecilia; Pombo, Lucia; Moreira, Antonio

    2011-01-01

    Technology plays a crucial role in pupils' and primary teachers' lives nowadays and its use can facilitate change towards an innovative school environment. The internet, for example, can act as a platform to foster science teaching and offers a variety of opportunities for effective science learning and engaging and motivating children. But…

  13. The normative dimensions of extending the human lifespan by age-related biomedical innovations.

    Science.gov (United States)

    Ehni, Hans-Joerg; Marckmann, Georg

    2008-10-01

    The current normative debate on age-related biomedical innovations and the extension of the human lifespan has important shortcomings. Mainly, the complexity of the different normative dimensions relevant for ethical and/or juridicial norms is not fully developed and the normative quality of teleological and deontological arguments is not properly distinguished. This article addresses some of these shortcomings and develops the outline of a more comprehensive normative framework covering all relevant dimensions. Such a frame necessarily has to include conceptions of a good life on the individual and societal levels. Furthermore, as a third dimension, a model for the access to and the just distribution of age-related biomedical innovations and technologies extending the human lifespan will be developed. It is argued that such a model has to include the different levels of the general philosophical theories of distributive justice, including social rights and theories of just health care. Furthermore, it has to show how these theories can be applied to the problem area of aging and extending the human lifespan.

  14. Global Health Innovation Technology Models

    Directory of Open Access Journals (Sweden)

    Kimberly Harding

    2016-04-01

    Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innova‐ tion for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utiliz‐ ing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to acceler‐ ate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

  15. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    Management of innovation is an important issue for firms and being good at this may be the deciding difference between death and survival. This paper ar-gues, based on 12 case studies, that new technology influence the innovative ca-pability of firms and disturbingly the process appears...... not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...

  16. Innovation in nuclear energy technology

    International Nuclear Information System (INIS)

    Dujardin, Th.; Bertel, E.; Kwang Seok, Lee; Foskolos, K.

    2007-01-01

    Innovation has been a driving force for the success of nuclear energy and remains essential for its sustainable future. Many research and development programmes focus on enhancing the performance of power plants in operation, current fuel design and characteristics, and fuel cycle processes used in existing facilities. Generally performed under the leadership of the industry. Some innovation programmes focus on evolutionary reactors and fuel cycles, derived from systems of the current generation. Such programmes aim at achieving significant improvements, in the field of economics or resource management for example, in the medium term. Often, they are undertaken by the industry with some governmental support as they require basic research together with technological development and adaptation. Finally, large programmes, often undertaken in an international, intergovernmental framework are devoted to design and development of a new generation of systems meeting the goals of sustainable development in the long term. Driving forces for nuclear innovation vary depending on the target technology, the national framework and the international context surrounding the research programme. However, all driving factors can be grouped in three categories: market drivers, political drivers and technology drivers. Globally, innovation in the nuclear energy sector is a success story but is a lengthy process that requires careful planning and adequate funding to produce successful outcomes

  17. Energy, environment and technological innovation

    Directory of Open Access Journals (Sweden)

    Fernando José Pereira da Costa

    2015-08-01

    Full Text Available The development problems can not be addressed without taking account of the environmental and energy issues, as well as the intimate relationship and the intense interaction between the two. In fact, the energy issue can not be analyzed separately from environmental issues, nor the advances in technological innovation, integrating dynamic-systemic way and so positioning address the issue of the development model to set the bulge the transition process experienced by the world since the seventies of the twentieth century. This transition, in turn, implies the passage of Paradigm of Fossil Fuels to Renewable Energy also called the Paradigm of renewable sources of energy, not just holding the energy problem, but towards to environmental and technological components. It is within this relatively slow and long process, instigator of high levels of volatility, turbulence inducing and motor of technological innovation, which is (re raises the question of the development model that defines how a new model/style development.

  18. Environmental regulation and technological innovation

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, A.E. [Carnegie Mellon Electricity Industry Center, Pittsburg, PA (United States)

    2002-07-01

    Government policies are a major factor in the determination of structural conditions of competition. The innovative activity comprises the following: invention, adoption, and diffusion. Invention involves research and development activities such as patenting, research and development budgets. The adoption phase is concerned with deployment. As for the diffusion phase, it involves commercialization, and scale-economies. The process of introducing new technologies that are adopted by small numbers of customers in a niche market was explained. Once costs are lowered through experience gained in designing, manufacturing and servicing the new technology, mew applications generally lead to larger markets. Environmental technologies have no early adopters, implying that governments have an important role to play. However, commercial processes are not normally as well known to government as it is to the private sector. The electoral cycle also interferes with long term research and development efforts for technological clusters. A look at sulphur dioxide control at United States power plants illustrated the problem. The author then explained the reasons behind low allowance prices. Low-sulphur western coal was rendered economic in large areas of the United States by rail deregulation. Electricity restructuring was also a factor. The author indicated that binding government regulation must come before adoption and diffusion of emission controls. A summary of recent research was provided, in which the author stated that no single policy instrument was likely to properly stimulate innovative activity. In those cases where both supply and demand are stimulated by government, the technological innovation is greatest. Stringent regulations induce innovation, as do greater flexibility and greater regulatory certainty. Knowledge transfer within the industry is vital. 8 refs., 3 figs.

  19. The Management of Innovation and Technology

    DEFF Research Database (Denmark)

    Howells, John

    in innovation - The reciprocal relationship between intellectual property law and technological innovation. - The role of technological skills and regimes of technological education in innovation. - An introduction to the role of the state in maintaining the innovative capacity of the private sector....... of the reality of taking decisions on innovation. The chapters cover: - The social context for individual acts of creative insight - The development of the technology-market relationship - The management of R&D and technological standards - Technological competition - The role of institutions of finance...

  20. Composite science and technology innovation index

    International Nuclear Information System (INIS)

    2011-02-01

    This book reports the composite science and technology innovation index with the purpose, process, conception and, the method of evaluation. It also indicates the result of composite science and technology innovation index in 2010, which itemizes the result according to resource, activity network, environment and outcome. The last part records analysis of science and technology innovation in Korea and development plan with various analysis.

  1. Handbook on advanced design and manufacturing technologies for biomedical devices

    CERN Document Server

    2013-01-01

    The last decades have seen remarkable advances in computer-aided design, engineering and manufacturing technologies, multi-variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and resu...

  2. Evolving technologies drive the new roles of Biomedical Engineering.

    Science.gov (United States)

    Frisch, P H; St Germain, J; Lui, W

    2008-01-01

    Rapidly changing technology coupled with the financial impact of organized health care, has required hospital Biomedical Engineering organizations to augment their traditional operational and business models to increase their role in developing enhanced clinical applications utilizing new and evolving technologies. The deployment of these technology based applications has required Biomedical Engineering organizations to re-organize to optimize the manner in which they provide and manage services. Memorial Sloan-Kettering Cancer Center has implemented a strategy to explore evolving technologies integrating them into enhanced clinical applications while optimally utilizing the expertise of the traditional Biomedical Engineering component (Clinical Engineering) to provide expanded support in technology / equipment management, device repair, preventive maintenance and integration with legacy clinical systems. Specifically, Biomedical Engineering is an integral component of the Medical Physics Department which provides comprehensive and integrated support to the Center in advanced physical, technical and engineering technology. This organizational structure emphasizes the integration and collaboration between a spectrum of technical expertise for clinical support and equipment management roles. The high cost of clinical equipment purchases coupled with the increasing cost of service has driven equipment management responsibilities to include significant business and financial aspects to provide a cost effective service model. This case study details the dynamics of these expanded roles, future initiatives and benefits for Biomedical Engineering and Memorial Sloan Kettering Cancer Center.

  3. Technology Licensing and Firm Innovation

    DEFF Research Database (Denmark)

    Moreira, Solon

    acquisition. The findings indicate that technology licensing is positively related to the number of inventions produced by the licensee in the years subsequent to the licensing deal. Subsequently, I investigate the moderating effect that organizational slack and myopia have on this main relationship....... The findings also suggest that high levels of Organizational Slack (available financial resources) strengthen the positive effect of licensing on innovation. However, higher levels of Organizational Myopia (the extent to which a firm draws on its own knowledge) can decrease the main effect of licensing....

  4. State strategies of governance in biomedical innovation: aligning conceptual approaches for understanding 'Rising Powers' in the global context

    Directory of Open Access Journals (Sweden)

    Faulkner Alex

    2011-02-01

    Full Text Available Abstract Background 'Innovation' has become a policy focus in its own right in many states as they compete to position themselves in the emerging knowledge economies. Innovation in biomedicine is a global enterprise in which 'Rising Power' states figure prominently, and which undoubtedly will re-shape health systems and health economies globally. Scientific and technological innovation processes and policies raise difficult issues in the domains of science/technology, civil society, and the economic and healthcare marketplace. The production of knowledge in these fields is complex, uncertain, inter-disciplinary and inter-institutional, and subject to a continuing political struggle for advantage. As part of this struggle, a wide variety of issues - regulation, intellectual property, ethics, scientific boundaries, healthcare market formation - are raised and policy agendas negotiated. Methods A range of social science disciplines and approaches have conceptualised such innovation processes. Against a background of concepts such as the competition state and the developmental state, and national innovation systems, we give an overview of a range of approaches that have potential for advancing understanding of governance of global life science and biomedical innovation, with special reference to the 'Rising Powers', in order to examine convergences and divergences between them. Conceptual approaches that we focus on include those drawn from political science/political economy, sociology of technology; Innovation Studies and Science & Technology Studies. The paper is part of a project supported by the UK ESRC's Rising Powers programme. Results We show convergences and complementarities between the approaches discussed, and argue that the role of the national state itself has become relatively neglected in much of the relevant theorising. Conclusions We conclude that an approach is required that enables innovation and governance to be seen as 'co

  5. State strategies of governance in biomedical innovation: aligning conceptual approaches for understanding 'Rising Powers' in the global context

    Science.gov (United States)

    2011-01-01

    Background 'Innovation' has become a policy focus in its own right in many states as they compete to position themselves in the emerging knowledge economies. Innovation in biomedicine is a global enterprise in which 'Rising Power' states figure prominently, and which undoubtedly will re-shape health systems and health economies globally. Scientific and technological innovation processes and policies raise difficult issues in the domains of science/technology, civil society, and the economic and healthcare marketplace. The production of knowledge in these fields is complex, uncertain, inter-disciplinary and inter-institutional, and subject to a continuing political struggle for advantage. As part of this struggle, a wide variety of issues - regulation, intellectual property, ethics, scientific boundaries, healthcare market formation - are raised and policy agendas negotiated. Methods A range of social science disciplines and approaches have conceptualised such innovation processes. Against a background of concepts such as the competition state and the developmental state, and national innovation systems, we give an overview of a range of approaches that have potential for advancing understanding of governance of global life science and biomedical innovation, with special reference to the 'Rising Powers', in order to examine convergences and divergences between them. Conceptual approaches that we focus on include those drawn from political science/political economy, sociology of technology; Innovation Studies and Science & Technology Studies. The paper is part of a project supported by the UK ESRC's Rising Powers programme. Results We show convergences and complementarities between the approaches discussed, and argue that the role of the national state itself has become relatively neglected in much of the relevant theorising. Conclusions We conclude that an approach is required that enables innovation and governance to be seen as 'co-producing' each other in a multi

  6. The Kyoto mechanisms and technological innovation

    DEFF Research Database (Denmark)

    Lund, Henrik

    2006-01-01

    Climate change response, including the implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. Based on the Danish case, this paper evaluates the type of technological change necessary. During a period of 30 years, Denmark...... countries. Consequently, the innovative technological development has changed. This paper evaluates the character of such change and makes preliminary recommendations for policies to encourage the use of the Kyoto Mechanisms as an acceleration of the necessary technological innovation....

  7. Managing Innovation and Change for Instructional Technology.

    Science.gov (United States)

    Holznagel, Donald C.

    1991-01-01

    Introduces the term "orgware" and reviews the literature on managing technological innovation in instructional settings. Six areas of management concern are described, and advice on managing innovation and change is provided. (11 references) (GLR)

  8. Innovative technologies for soil cleanup

    International Nuclear Information System (INIS)

    Yow, J.L. Jr.

    1992-09-01

    These notes provide a broad overview of current developments in innovative technologies for soil cleanup. In this context, soil cleanup technologies include site remediation methods that deal primarily with the vadose zone and with relatively shallow, near-surface contamination of soil or rock materials. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in soil cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the sits-specific technical challenges presented by each sold contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After cataloging a representative selection of these technologies, one of the new technologies, Dynamic Underground Stripping, is discussed in more detail to highlight a promising soil cleanup technology that is now being field tested

  9. Innovative technologies for groundwater cleanup

    International Nuclear Information System (INIS)

    Yow, J.L. Jr.

    1992-09-01

    These notes provide a broad overview of current developments in innovative technologies for groundwater cleanup. In this context, groundwater cleanup technologies include site remediation methods that deal with contaminants in ground water or that may move from the vadose zone into ground water. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in groundwater cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the site-specific technical challenges presented by each groundwater contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After reviewing a representative selection of these technologies, one of the new technologies, the Microbial Filter method, is discussed in more detail to highlight a promising in situ groundwater cleanup technology that is now being readied for field testing

  10. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  11. Making technological innovation work for sustainable development

    OpenAIRE

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.; Clark, William C.

    2016-01-01

    Sustainable development requires harnessing technological innovation to improve human well-being in current and future generations. However, poor, marginalized, and unborn populations too often lack the economic or political power to shape innovation processes to meet their needs. Issues arise at all stages of innovation, from invention of a technology through its selection, production, adaptation, adoption, and retirement. Three insights should inform efforts to intervene in innovation syste...

  12. Technological Innovation, R & D Activities and Innovation System Between Organizations

    Directory of Open Access Journals (Sweden)

    Jonas Pedro Fabris

    2015-08-01

    Full Text Available This theoretical paper aimed to explicit, through the rescue of theoretical assumptions, the innovation, the innovation system, and the research and development (R & D activities. The innovation, especially technological innovation, is now seen as essential in differentiation strategies, competitiveness and growth in a greater number of businesses. Innovation is not only the result of financial investments by companies. For it to exist, it is necessary the existence of innovative capacity that should be present at all stages of the innovation process, and a favorable institutional environment and, increasingly, of specific incentive policies. That is, there are internal and external factors to companies and other institutions involved in the process. Innovation systems were discovered to resolve the variations in the degree of competitiveness of different economies and, above all, in relation to the technological performance and the ability to innovate these economies face the growing importance of international markets for high-tech products. Thus, it was found that successful innovators are not successful just because of their personal qualities and actions but as a result of their interaction with research and innovation systems that inhabit the quality of such systems.

  13. A Global Biomedical R&D Fund and Mechanism for Innovations of Public Health Importance

    OpenAIRE

    Balasegaram, Manica; Brechot, Christian; Farrar, Jeremy; Heymann, David; Ganguly, Nirmal; Khor, Martin; Levy, Yves; Matsoso, Precious; Minghui, Ren; Pecoul, Bernard; Peilong, Liu; Tanner, Marcel; Røttingen, John-Arne

    2015-01-01

    Anti-microbial resistance, emerging infectious diseases, and neglected diseases are all important public health concerns and priorities with serious market failures, deficits, and identified needs in biomedical innovation. It is important to reconcile, rather than fragment, the needs of these three priority areas by considering an umbrella framework for specifically financing and coordinating research and development (R&D) that delivers innovation while securing patient access. A sizeab...

  14. Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

    Directory of Open Access Journals (Sweden)

    Jana Filová

    2015-12-01

    Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

  15. Game-like Technology Innovation Education

    DEFF Research Database (Denmark)

    Magnussen, Rikke

    2011-01-01

    scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...

  16. Digital Technologies as Education Innovation at Universities

    Science.gov (United States)

    Kryukov, Vladimir; Gorin, Alexey

    2017-01-01

    This paper analyses the use of digital technology-based education innovations in higher education. It demonstrated that extensive implementation of digital technologies in universities is the main factor conditioning the acceleration of innovative changes in educational processes, while digital technologies themselves become one of the key…

  17. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  18. Sol-gel technology for biomedical engineering

    International Nuclear Information System (INIS)

    Podbielska, H.; Ulatowska-Jarza, A.

    2005-01-01

    Sol-gel derived silica possess many promising features, including low-temperature preparation procedure, porosity, chemical and physical stability. Applications exploiting porous materials to encapsulate sensor molecules, enzymes and many other compounds, are developing rapidly. In this paper some potential applications, with emphasis on biomedical and environmental ones, are reviewed. The material preparation procedure is described and practical remarks on silica-based sol-gels are included. It is reported that sol-gels with entrapped various molecules may be used in construction of implants and coatings with bioactive properties. It is shown how to exploit the sol-gel production route for construction of sol-gel coated fiberoptic applicators for laser therapy. The applications of bioactive materials are discussed, as well. It is demonstrated that it is possible to immobilize photosensitive compounds in sol-gel matrix without loosing their photoactivity. Some examples of sol-gel based biosensors are demonstrated, as well, showing their potential for detecting various gases, toxic substances, acidity, humidity, enzymes and biologically active agents. (authors)

  19. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  20. An Overview of SBIR Phase 2 Physical Sciences and Biomedical Technologies in Space

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2015-01-01

    Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing areas in physical sciences and biomedical technologies in space, which is one of six core competencies at NASA Glenn Research Center. There are twenty two technologies featured with emphasis on a wide spectrum of applications such as reusable handheld electrolyte, sensor for bone markers, wideband single crystal transducer, mini treadmill for musculoskeletal, and much more. Each article in this report describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

  1. Unmet needs: relevance to medical technology innovation?

    Science.gov (United States)

    McCarthy, Avril D; Sproson, Lise; Wells, Oliver; Tindale, Wendy

    2014-01-01

    This paper describes and discusses the role of unmet needs in the innovation of new medical technologies using the National Institute for Health Research Devices for Dignity (D4D) Healthcare Technology Co-operative as a case study. It defines an unmet need, providing a spectrum of classification and discusses the benefits and the challenges of identifying unmet need and its influence on the innovation process. The process by which D4D has captured and utilized unmet needs to drive technology innovation is discussed and examples given. It concludes by arguing that, despite the challenges, defining and reviewing unmet need is a fundamental factor in the success of medical technology innovation.

  2. Additive Manufacturing Technology for Biomedical Components: A review

    Science.gov (United States)

    Aimi Zaharin, Haizum; Rani, Ahmad Majdi Abdul; Lenggo Ginta, Turnad; Azam, Farooq I.

    2018-03-01

    Over the last decades, additive manufacturing has shown potential application in ranging fields. No longer a prototyping technology, it is now being utilised as a manufacturing technology for giant industries such as the automotive, aircraft and recently in the medical industry. It is a very successful method that provides health-care solution in biomedical sectors by producing patient-specific prosthetics, improve tissues engineering and facilitate pre-operating session. This paper thus presents a brief overview of the most commercially important additive manufacturing technologies, which is currently available for fabricating biomedical components such as Stereolithography (SLA), Selective Laser Sintering (SLS), Selective Laser Melting (SLM), Fused Deposition Modelling (FDM) and Electron Beam Melting (EBM). It introduces the basic principles of the main process, highlights some of the beneficial applications in medical industry and the current limitation of applied technology.

  3. Innovative strategies in teaching of biomedical sciences to health ...

    African Journals Online (AJOL)

    Recently, innovative methods of enabling the students to acquire the knowledge and skills have been evolved, and include student-centered and problem-based learning strategies, among others. These are strategies in which the student is taught how to learn for him/her self and then becomes responsible for his/her own ...

  4. Citation algorithms for identifying research milestones driving biomedical innovation

    NARCIS (Netherlands)

    Comins, J.A.; Leydesdorff, L.

    Scientific activity plays a major role in innovation for biomedicine and healthcare. For instance, fundamental research on disease pathologies and mechanisms can generate potential targets for drug therapy. This co-evolution is punctuated by papers which provide new perspectives and open new

  5. Technology and Innovation Management in Higher Education

    DEFF Research Database (Denmark)

    Morales, Antonio Adrián Arciénaga; Nielsen, Janni; Bacarini, Hernán Alberto

    2018-01-01

    different ways to obtain a panoply of competencies to identify technology and innovation management issues at individual business and regional level, particularly for small-and-medium-sized enterprises (SMEs). The model addresses innovation challenges related to new innovative relationships and product...

  6. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  7. Nanotechnologies, technologies converging and potential biomedical applications

    International Nuclear Information System (INIS)

    Capuano, Vincenzo

    2005-01-01

    The applications of nanotechnology to biology and medicine appear really promising far diagnostics, for various therapeutic approaches and in medical instrumentations. The growing synergism among nanotechnology, biotechnology, information technology and cognitive sciences, their convergence (NBIC) from the nano scale, could involve on next decades great changes in medicine, from a reactive to a predictive and preventive approach. It is expected that NBIC converging technologies could achieve tremendous improvements in human abilities and enhance societal achievements. It appears therefore necessary a careful assessment of related social and ethical implications, in the framework of a constant dialogue between science and society [it

  8. Game-like Technology Innovation Education

    DEFF Research Database (Denmark)

    Magnussen, Rikke

    2011-01-01

      The aim of this paper is to discuss the first results and methodological challenges and perspectives of designing game-inspired scenarios for implementation of innovation processes into schools' science education. This paper comprises and report on a case study of a game-inspired innovation...... scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...... presented, along with discussions of the future of development of these educational spaces....

  9. Enacting Risk in Independent Technological Innovation

    DEFF Research Database (Denmark)

    Berglund, Henrik; Hellström, Tomas

    2002-01-01

    The present study aims at investigating the role of risk in the activity of independent technological venturing. Altogether, 12 deep-interviews were conducted with technological entrepreneurs, who had taken part in the inventive, developmental and the commercialisation phases of a technology......-based innovation process. The interviews revealed a number of enactment approaches through which these innovators encountered and affected (dealt with or transformed) risk within the innovation process. Factors thus developed from the empirical material included human capital, pace and priority, the world moves...... for the benefit of innovation management....

  10. Making technological innovation work for sustainable development.

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

    2016-08-30

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

  11. Making technological innovation work for sustainable development

    Science.gov (United States)

    Anadon, Laura Diaz; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.

    2016-01-01

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset. PMID:27519800

  12. Solar Preheated Ventilation - Innovative Solar Technology

    National Research Council Canada - National Science Library

    Gaberson, Howard

    1999-01-01

    .... This innovative technology applies to both new construction or rehabilitation projects. This TDS introduces this low maintenance solar technology for consideration in all future industrial ventilation or HVAC projects...

  13. Radiation processing technology for preparation of fine shaped biomedical materials

    Energy Technology Data Exchange (ETDEWEB)

    Kumakura, M.; Yoshida, M.; Asano, M. (Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment); Yamanaka, H. (Gunma Univ., Maebashi (Japan). School of Medicine)

    1992-06-01

    Radiation processing technology for the preparation of fine shaped biomedical materials was studied from the aspect of a development of the technology and its application. Electron beam irradiation technology was applied to the preparation of fine shaped biomedical materials such as thin polymer films in diagnosis, in which enzyme and antibody were used as a bioactive substance. Electron beam cast-polymerization and electron beam repeat surface-polymerization, that are surface irradiation techniques of homogeneous hydrophilic monomer solution containing enzymes made it possible to form the immobilized antibody films. In this technique, the films with various thicknesses (50-500 [mu]m) were obtained by regulating the electron beam energy. The thin polymer films immobilizing anti-[alpha]-fetoprotein were evaluated from the aspect of immunoagents for diagnosis of liver cancer. (Author).

  14. [Flexible print circuit technology application in biomedical engineering].

    Science.gov (United States)

    Jiang, Lihua; Cao, Yi; Zheng, Xiaolin

    2013-06-01

    Flexible print circuit (FPC) technology has been widely applied in variety of electric circuits with high precision due to its advantages, such as low-cost, high specific fabrication ability, and good flexibility, etc. Recently, this technology has also been used in biomedical engineering, especially in the development of microfluidic chip and microelectrode array. The high specific fabrication can help making microelectrode and other micro-structure equipment. And good flexibility allows the micro devices based on FPC technique to be easily packaged with other parts. In addition, it also reduces the damage of microelectrodes to the tissue. In this paper, the application of FPC technology in biomedical engineering is introduced. Moreover, the important parameters of FPC technique and the development trend of prosperous applications is also discussed.

  15. Technology and Innovation in Adult Learning

    Science.gov (United States)

    King, Kathy P.

    2017-01-01

    "Technology and Innovation in Adult Learning" introduces educators and students to the intersection of adult learning and the growing technological revolution. Written by an internationally recognized expert in the field, this book explores the theory, research, and practice driving innovation in both adult learning and learning…

  16. Studying Innovation Technologies in Modern Education

    Science.gov (United States)

    Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

    2016-01-01

    In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

  17. The relevance of Heidegger's philosophy of technology for biomedical ethics.

    Science.gov (United States)

    Svenaeus, Fredrik

    2013-02-01

    Heidegger's thoughts on modern technology have received much attention in many disciplines and fields, but, with a few exceptions, the influence has been sparse in biomedical ethics. The reason for this might be that Heidegger's position has been misinterpreted as being generally hostile towards modern science and technology, and the fact that Heidegger himself never subjected medical technologies to scrutiny but was concerned rather with industrial technology and information technology. In this paper, Heidegger's philosophy of modern technology is introduced and then brought to bear on medical technology. Its main relevance for biomedical ethics is found to be that the field needs to focus upon epistemological and ontological questions in the philosophy of medicine related to the structure and goal of medical practice. Heidegger's philosophy can help us to see how the scientific attitude in medicine must always be balanced by and integrated into a phenomenological way of understanding the life-world concerns of patients. The difference between the scientific and the phenomenological method in medicine is articulated by Heidegger as two different ways of studying the human body: as biological organism and as lived body. Medicine needs to acknowledge the priority of the lived body in addressing health as a way of being-in-the-world and not as the absence of disease only. A critical development of Heidegger's position can provide us with a criterion for distinguishing the uses of medical technologies that are compatible with such an endeavor from the technological projects that are not.

  18. GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

  19. Rethinking the Market - Technology Relationship for Innovation

    DEFF Research Database (Denmark)

    Howells, John

    This paper revisits the 'what causes innovation - market pull or technology push?' debate to argue that the conceptualisation is flawed and that the firm is the only 'agent' capable of innovative action. The paper differentiates between 'use', 'need' and 'intended use' to obtain greater precision...... with respect to the technology-market matching process that is fundamental to innovation. The validity of the approach is demonstrated through empirical examples. These examples also show the value of distinguishing between two types of market concept used by the innovating firm. These are the 'reference...... market' which is a traded product that is a principal source of 'use' ideas for the mental construction of the 'innovation market' concept. It is the latter that can be thought to guide the construction of innovative production technology....

  20. Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

    Institute of Scientific and Technical Information of China (English)

    Yinxing Hong; Yao Lu; Jianghuai Zheng

    2017-01-01

    In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

  1. Bioactive materials for biomedical applications using sol-gel technology

    International Nuclear Information System (INIS)

    Gupta, Radha; Kumar, Ashok

    2008-01-01

    This review paper focuses on the sol-gel technology that has been applied in many of the potential research areas and highlights the importance of sol-gel technology for preparing bioactive materials for biomedical applications. The versatility of sol-gel chemistry enables us to manipulate the characteristics of material required for particular applications. Sol-gel derived materials have proved to be good biomaterials for coating films and for the construction of super-paramagnetic nanoparticles, bioactive glasses and fiberoptic applicators for various biomedical applications. The introduction of the sol-gel route in a conventional method of preparing implants improves the mechanical strength, biocompatibility and bioactivity of scaffolds and prevents corrosion of metallic implants. The use of organically modified silanes (ORMOSILS) yields flexible and bioactive materials for soft and hard tissue replacement. A novel approach of nitric-oxide-releasing sol-gels as antibacterial coatings for reducing the infection around orthopedic implants has also been discussed

  2. Innovative Silicon Microgrippers for Biomedical Applications: Design, Mechanical Simulation and Evaluation of Protein Fouling

    Directory of Open Access Journals (Sweden)

    Cristina Potrich

    2018-03-01

    Full Text Available The demand of miniaturized, accurate and robust micro-tools for minimally invasive surgery or in general for micro-manipulation, has grown tremendously in recent years. To meet this need, a new-concept comb-driven microgripper was designed and fabricated. Two microgripper prototypes differing for both the number of links and the number of conjugate surface flexure hinges are presented. Their design takes advantage of an innovative concept based on the pseudo-rigid body model, while the study of microgripper mechanical potentialities in different configurations is supported by finite elements’ simulations. These microgrippers, realized by the deep reactive-ion etching technology, are intended as micro-tools for tissue or cell manipulation and for minimally invasive surgery; therefore, their biocompatibility in terms of protein fouling was assessed. Serum albumin dissolved in phosphate buffer was selected to mimic the physiological environment and its adsorption on microgrippers was measured. The presented microgrippers demonstrated having great potential as biomedical tools, showing a modest propensity to adsorb proteins, independently from the protein concentration and time of incubation.

  3. Education and research in biomedical engineering of the Budapest University of Technology and Economics.

    Science.gov (United States)

    Benyó, Z

    2006-03-01

    Biomedical Engineering is a relatively new interdisciplinary science. This review paper presents the biomedical engineering activity, which is carried out at the Budapest University of Technology and Economics (BUTE) and its partner institutions. In the first parts the main goals and the curriculum of the Biomedical Engineering Education Program is presented. The second part of the paper summarizes the most important biomedical engineering researches most of them carried out in the Biomedical Engineering Laboratory of BUTE.

  4. Innovative technology summary report: Innovative grouting and retrieval

    International Nuclear Information System (INIS)

    1998-10-01

    Innovative grouting and retrieval (IGR) technology provides an innovative and cost-effective approach for full-pit and hot-spot retrieval of buried transuranic (TRU) waste sites and in situ disposal of buried waste with improved confinement. Innovative grouting technology: minimizes spreading of contamination by agglomerating the soil particles containing plutonium/americium particulates into nonaerosolizable particles; minimizes worker risks and exposure; is more effective in controlling the spread of contamination than common mining practices such as directed air flow, misting, and fixant sprays; eliminates further treatment because the grouted, rubberized waste is ready for shipment to the Waste Isolation Pilot Project (WIPP); reduces capital expenditures, operating costs, and containment structure requirements; and is an estimated five times faster than the baseline technology of removal, packaging, and storage

  5. INNOVATION TRENDS ON INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Radu CURETEANU

    2010-12-01

    Full Text Available The importance of innovation was long underestimated in service activities. In contrast to the radical innovations vital to growth in manufacturing sectors, innovations in services and tourism were secondary and capital-scarce, and for this reason they were excluded from the scope of government interest and action. It is interesting to note that the discourse changed with the emergence of new information and communication technologies, which have been especially influential in the realm of tourism.

  6. Game-Like Technology Innovation Education

    Science.gov (United States)

    Magnussen, Rikke

    2011-01-01

    This paper examines the methodological challenges and perspectives of designing game-like scenarios for the implementation of innovation processes in school science education. This paper presents a design-based research study of a game-like innovation scenario designed for technology education for Danish public school students aged 13-15. Students…

  7. Technological innovations: from bench to bedside.

    Science.gov (United States)

    Robert, Glenn

    2009-09-01

    The NHS is perceived to be slower than other healthcare systems in adopting innovative technologies that can deliver patient benefits. This article summarises what is known about the role of nurses in assimilating such innovations into clinical care, and outlines the challenges facing nurse leaders.

  8. MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

  9. Regulatory barriers to hazardous waste technology innovation

    International Nuclear Information System (INIS)

    Kuusinen, T.L.; Siegel, M.R.

    1991-02-01

    The primary federal regulatory programs that influence the development of new technology for hazardous waste are the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA, also commonly known as Superfund). Two important aspects of RCRA that can create barriers to hazardous waste technology innovation are technology-based waste pre-treatment standards and a cumbersome permitting program. By choosing a technology-based approach to the RCRA land disposal restrictions program, the US Environmental Protection Agency (EPA) has simultaneously created tremendous demand for the technologies specified in its regulations, while at the same time significantly reduced incentives for technology innovation that might have otherwise existed. Also, the RCRA hazardous waste permitting process can take years and cost hundreds of thousands of dollars. The natural tendency of permit writers to be cautious of unproven (i.e., innovative) technology also can create a barrier to deployment of new technologies. EPA has created several permitting innovations, however, to attempt to mitigate this latter barrier. Understanding the constraints of these permitting innovations can be important to the success of hazardous waste technology development programs. 3 refs

  10. Pathways to Inclusive Development through Innovation, Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Technology and innovation can drive economic growth, help solve social and ... capacities within developing countries to create inclusive growth and poverty ... science, population and public health, and health systems research relevant to the ...

  11. Water Technology Innovation: 10 Market Opportunities

    Science.gov (United States)

    The Water Technology Innovation Blueprint offers an overview of market opportunities that include conserving and recovering energy, recovering nutrients, improving water infrastructure, reducing costs for water monitoring, and improving water quality.

  12. Delivering construction projects using innovative building technologies

    CSIR Research Space (South Africa)

    Ampofo-Anti, Naalamkai

    2017-07-01

    Full Text Available . Figure 1: IBT delivery flowchart Proceedings 11th Built Environment Conference 6 th August – 8 th August 2017 Delivering construction projects using innovative building technologies Durban, South Africa 5. REFERENCES Ampofo-Anti, N...

  13. Introduction to Innovative Food Processing and Technology

    OpenAIRE

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  14. Technological Innovation Capabilities and Firm Performance

    OpenAIRE

    Richard C.M. Yam; William Lo; Esther P.Y. Tang; Antonio; K.W. Lau

    2010-01-01

    Technological innovation capability (TIC) is defined as a comprehensive set of characteristics of a firm that facilities and supports its technological innovation strategies. An audit to evaluate the TICs of a firm may trigger improvement in its future practices. Such an audit can be used by the firm for self assessment or third-party independent assessment to identify problems of its capability status. This paper attempts to develop such an auditing framework that can...

  15. Efficiency of innovative technology in construction industry

    Science.gov (United States)

    Stverkova, H.; Vaclavik, V.

    2017-10-01

    The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

  16. The Kyoto Mechanisms and Technological Innovation

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    Climate change response, including implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. One of the important agreements in several declarations, including the Kyoto protocol, has been to promote and coordinate...... the collaboration between the countries in the necessary technological development. The paper encourage that the Kyoto mechanisms will be used for acceleration of the necessary technical innovation in Denmark....

  17. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  18. Indigenous Technological Innovation : Capability and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... as determined by a Steering Committee of experts drawn from government agencies, universities and research institutions all over the country. It is expected to generate a body of evidence that will aid Chinese policymakers to develop and implement effective policies for enhancing indigenous innovations in the west.

  19. Governance and commercialization of technological innovation

    International Nuclear Information System (INIS)

    Fidanza, Andrea

    2015-01-01

    Technological innovation is not only a direct result of the economic resources allocated to research and development activities. It is also the result of the creation and organization of a complex innovation system that aims to involve different actors and stake holders along a process based on different stages ranging from scientific discovery to technological maturity. Risk and funds sharing between public and private sectors is a key element for the transition of a technology towards its commercialization, without which the innovation process is likely to remain trapped in the so-called “Valley of death” of a technology. Overcoming this barrier request a process based on three pillars: research, demonstration and production of a specific technology [it

  20. River Protection Project Technology and Innovation Roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

    2017-08-14

    The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

  1. Innovation diffusion, technological convergence and economic growth

    OpenAIRE

    R. Andergassen; F. Nardini; M. Ricottilli

    2013-01-01

    The paper investigates the mechanics through which novel technological principles are developed and diffused throughout an economy consisting of a technologically heterogeneous ensemble of firms. In the model entrepreneurs invest in the discovery and in the diffusion of a technological principle and their profit flow depends on how many firms adopt the innovation and on how long it takes other entrepreneurs to improve it. We show that technological convergence emerges from the competition amo...

  2. Using qualitative research methods in biomedical innovation: the case of cultured red blood cells for transfusion.

    Science.gov (United States)

    Lyall, Catherine; King, Emma

    2016-05-11

    Qualitative research has a key role to play in biomedical innovation projects. This article focuses on the appropriate use of robust social science methodologies (primarily focus group studies) for identifying the public's willingness and preference for emerging medical technologies. Our study was part of the BloodPharma project (now known as the Novosang project) to deliver industrially generated red blood cells for transfusion. Previous work on blood substitutes shows that the public prefers donated human blood. However, no research has been conducted concerning attitudes to stem cell derived red blood cells. Qualitative research methods including interviews and focus groups provide the methodological context for this paper. Focus groups were used to elicit views from sub-sections of the UK population about the potential use of such cultured red blood cells. We reflect on the appropriateness of that methodology in the context of the BloodPharma project. Findings are in the form of lessons transferable to other interdisciplinary, science-led teams about what a social science dimension can bring; why qualitative research should be included; and how it can be used effectively. Qualitative data collection offers the strength of exploring ambivalence and investigating the reasons for views, but not necessarily their prevalence in wider society. The inherent value of a qualitative method, such as focus groups, therefore lies in its ability to uncover new information. This contrasts with a quantitative approach to simply 'measuring' public opinion on a topic about which participants may have little prior knowledge. We discuss a number of challenges including: appropriate roles for embedded social scientists and the intricacies of doing upstream engagement as well as some of the design issues and limitations associated with the focus group method.

  3. Technological innovation in neurosurgery: a quantitative study.

    Science.gov (United States)

    Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

    2015-07-01

    Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

  4. Innovating beyond Technology : Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

    NARCIS (Netherlands)

    C.V. Heij (Kevin)

    2015-01-01

    textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several

  5. Nano technologies, technologies converging and potential biomedical applications

    International Nuclear Information System (INIS)

    Capuano, V.

    2005-01-01

    The applications of nano technology to biology and medicine appear really promising for diagnostics, for various therapeutic approaches and in medical instrumentations. The growing synergism among nano technology, biotechnology, information technology and cognitive sciences, their convergence (NBIC) from the nano scale, could involve on next decades great changes in medicine, from a reactive to a predictive and preventive approach. It is expected that NBIC converging technologies could achieve tremendous improvements in human abilities and enhance societal achievement of related social and ethical implications, in the framework of a constant dialogue between science and society [it

  6. Review of spectral imaging technology in biomedical engineering: achievements and challenges.

    Science.gov (United States)

    Li, Qingli; He, Xiaofu; Wang, Yiting; Liu, Hongying; Xu, Dongrong; Guo, Fangmin

    2013-10-01

    Spectral imaging is a technology that integrates conventional imaging and spectroscopy to get both spatial and spectral information from an object. Although this technology was originally developed for remote sensing, it has been extended to the biomedical engineering field as a powerful analytical tool for biological and biomedical research. This review introduces the basics of spectral imaging, imaging methods, current equipment, and recent advances in biomedical applications. The performance and analytical capabilities of spectral imaging systems for biological and biomedical imaging are discussed. In particular, the current achievements and limitations of this technology in biomedical engineering are presented. The benefits and development trends of biomedical spectral imaging are highlighted to provide the reader with an insight into the current technological advances and its potential for biomedical research.

  7. Technology Integration and Innovation during Reflective Teaching

    Science.gov (United States)

    Baporikar, Neeta

    2016-01-01

    With emerging innovations, the use of technology tools to make learning process effective is foreseeable. Hence, appropriate incorporation of technology can make a valuable contribution to the learning and undoubtedly reflection is core to learning. With today's twenty-first century learners, it is important that educators advocate integrating…

  8. Mozambique Science, Technology and Innovation Review | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project aims to strengthen the capacity of the Mozambique Ministry of Science and Technology (MOST) to govern the country's science, technology and innovation (STI) system, and of researchers and policymakers to conduct systematic reviews of STI policy implementation. It will do so by supporting a review of the ...

  9. Key Issues in Global Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Roberto Sbragia

    2012-04-01

    Full Text Available This article aimed to identify those issues that were present in global technological innovation projects carried out by Brazilian multinational companies and which performance criterions these undertakings met. We investigated 36 global technological innovation projects from Brazilian multinational enterprises through a web-survey. Findings show that these companies went beyond the traditional iron triangle to evaluate their technological efforts and considered additional performance dimensions such as customer satisfaction, business results, and preparation for the future. Results also show high degree of presence for issues emerging from the industry, moderate degree of presence for issues emerging from both the project and R&D activities, and low degree of presence for issues emerging from the headquarters, the subsidiaries, and the external environment. Further research is needed to find out if and how these issues influenced the performance of the global technological innovation projects studied.DOI:10.5585/gep.v3i1.72

  10. The Kyoto mechanisms and technological innovation

    International Nuclear Information System (INIS)

    Lund, Henrik

    2006-01-01

    Climate change response, including the implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. Based on the Danish case, this paper evaluates the type of technological change necessary. During a period of 30 years, Denmark managed to stabilize primary energy supply, and CO 2 emissions decreased by 10%, during a period of 20 years. However, after the introduction of the Kyoto Mechanisms, Denmark has changed its strategy. Instead of continuing the domestic CO 2 emission controls, Denmark plans to buy CO 2 reductions in other countries. Consequently, the innovative technological development has changed. This paper evaluates the character of such change and makes preliminary recommendations for policies to encourage the use of the Kyoto Mechanisms as an acceleration of the necessary technological innovation. (author)

  11. On transferring the grid technology to the biomedical community.

    Science.gov (United States)

    Mohammed, Yassene; Sax, Ulrich; Dickmann, Frank; Lippert, Joerg; Solodenko, Juri; von Voigt, Gabriele; Smith, Matthew; Rienhoff, Otto

    2010-01-01

    Natural scientists such as physicists pioneered the sharing of computing resources, which resulted in the Grid. The inter domain transfer process of this technology has been an intuitive process. Some difficulties facing the life science community can be understood using the Bozeman's "Effectiveness Model of Technology Transfer". Bozeman's and classical technology transfer approaches deal with technologies that have achieved certain stability. Grid and Cloud solutions are technologies that are still in flux. We illustrate how Grid computing creates new difficulties for the technology transfer process that are not considered in Bozeman's model. We show why the success of health Grids should be measured by the qualified scientific human capital and opportunities created, and not primarily by the market impact. With two examples we show how the Grid technology transfer theory corresponds to the reality. We conclude with recommendations that can help improve the adoption of Grid solutions into the biomedical community. These results give a more concise explanation of the difficulties most life science IT projects are facing in the late funding periods, and show some leveraging steps which can help to overcome the "vale of tears".

  12. Aerospace Technology Innovation. Volume 9

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor)

    2001-01-01

    Commercializing technology is a daunting task. Of every 11 new product ideas, only one will successfully make it to the marketplace. Fully 46% of new product investment becomes sunk in cost. Yet, a few good companies consistently attain an 80% technology commercialization success rate and have lead the way in establishing best practices. The NASA Incubator program consists of nine incubators, each residing near a NASA research center. The purpose of the incubators is to use the best practices is to use the best practices of technology commercialization to help early stage businesses successfully launch new products that incorporate NASA technology.

  13. The technological innovation case of the KAERI

    International Nuclear Information System (INIS)

    Choi, J. I.; Jang, S. K.; Hong, K. P.; Lee, E. S.

    2008-01-01

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge

  14. Indigenous knowledges driving technological innovation

    Science.gov (United States)

    Lilian Alessa; Carlos Andrade; Phil Cash Cash; Christian P. Giardina; Matt Hamabata; Craig Hammer; Kai Henifin; Lee Joachim; Jay T. Johnson; Kekuhi Kealiikanakaoleohaililani; Deanna Kingston; Andrew Kliskey; Renee Pualani Louis; Amanda Lynch; Daryn McKenny; Chels Marshall; Mere Roberts; Taupouri Tangaro; Jyl Wheaton-Abraham; Everett. Wingert

    2011-01-01

    This policy brief explores the use and expands the conversation on the ability of geospatial technologies to represent Indigenous cultural knowledge. Indigenous peoples' use of geospatial technologies has already proven to be a critical step for protecting tribal self-determination. However, the ontological frameworks and techniques of Western geospatial...

  15. Competitive edge through technological innovation

    International Nuclear Information System (INIS)

    Gottlieb, M.

    1997-01-01

    The vital role of advanced technology in natural gas cost reduction has been described. Among advanced technologies, seismic, drilling and fracturing technologies have been singled out as being the most important. Access to new supply frontiers (aided by the application of advanced technology), and more effective business strategies were considered as the other most influential factors in efficiently exploiting oil and gas resources. In view of predictions of substantially increased demand, advanced technology is poised to be even more important in the future. With this as background, an examination of the level of investment for the development of advanced technology revealed that energy industry R and D expenditures were lowest among industries in the U.S. (only 0.7 per cent of sales). It was concluded that notwithstanding industry's ability to improve output per R and D dollar invested, the achievement of the necessary technological advancements is a strategic imperative for both the industry and the U.S. as a whole. As far as the industry is concerned, its ability to maintain a competitive edge over competing energy forms, will be determined largely on the basis of its willingness to invest in future advanced technology development. 2 refs., 14 figs

  16. Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

    NARCIS (Netherlands)

    Kieft, A.C.

    2017-01-01

    The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS

  17. Art technologies as possible propulsars in technological innovation

    DEFF Research Database (Denmark)

    Jørgensen, Lars Botin

    2003-01-01

    kind. This discussion, of general character, constitutes the initial part of this paper. Then it briefly looks into the final terms of the papertitle and try to relate to the diffuse and discussed technological innovation. Both aspects – art and technology and technological innovation – will be dealt...... with from a historical/hermeneutic and social constructivist point of view, as the paper moves from a general principal level to a more specific, exemplary level, where three different art technologies are presented as possible propulsars in technological innovation.......Art and technology has, as the German philosopher Martin Heidegger points out, the same etymological root. A thorough investigation of the relationship between art and technology will show how this same root has manifested itself in different times and spaces bringing results of the most variegated...

  18. Open Innovation and Technology Maturity Analysis

    Science.gov (United States)

    2007-09-11

    INFOLOGIC Inc. All rights reserved. Innovation Management Model  Product: Technology-heavy (e.g: Airplane, iPod) OR Service-heavy (e.g: Starbucks ...System, eBay)  Process: Any critical business process to ensure the success of product (e.g: iTune for iPod, Marketing and Supply Chain Management...Integration and Voice of the Customer Voice of the Customer Integration M A T U R I T Y VALUE Radical Innovation Evolutionary Innovation INCREMENTAL

  19. fastPACE Train-the-Trainer: A scalable new educational program to accelerate training in biomedical innovation, entrepreneurship, and commercialization.

    Science.gov (United States)

    Servoss, Jonathan; Chang, Connie; Fay, Jonathan; Lota, Kanchan Sehgal; Mashour, George A; Ward, Kevin R

    2017-10-01

    The Institute of Medicine recommended the advance of innovation and entrepreneurship training programs within the Clinical & Translational Science Award (CTSA) program; however, there remains a gap in adoption by CTSA institutes. The University of Michigan's Michigan Institute for Clinical & Health Research and Fast Forward Medical Innovation (FFMI) partnered to develop a pilot program designed to teach CTSA hubs how to implement innovation and entrepreneurship programs at their home institutions. The program provided a 2-day onsite training experience combined with observation of an ongoing course focused on providing biomedical innovation, commercialization and entrepreneurial training to a medical academician audience (FFMI fast PACE). All 9 participating CTSA institutes reported a greater connection to biomedical research commercialization resources. Six launched their own version of the FFMI fast PACE course or modified existing programs. Two reported greater collaboration with their technology transfer offices. The FFMI fast PACE course and training program may be suitable for CTSA hubs looking to enhance innovation and entrepreneurship within their institutions and across their innovation ecosystems.

  20. Achievements of Theoretical Research on Chinese Technological Innovation

    Directory of Open Access Journals (Sweden)

    Wang Hanxi

    2017-01-01

    Full Text Available Using the CNKI database as the sample source, we investigated the makeup of current research results on Chinese technological innovation, and found that the study of Chinese technological innovation consists of nine directions - underlying principles of innovation behavior, concepts of innovation cognition, methods of innovation, behavior of innovation subjects, structure of innovation mediators, innovation capacity, public service system of innovation, policy support system of innovation, and cultural environment of innovation, as well as several issues of innovation, including its behavior mechanism, operational mechanism, work mechanism, modes of implementation, modes of mathematical representation, modes of physical representation, modes of behavioral representation, modes of performance representation, modes of function realization, modes of structure realization, modes of workflow realization, modes of carrier realization, etc. Such a scattered makeup requires us to formulate the system of Chinese technological innovation achievements from the perspective of philosophy of science. This will be an important mission in the study of Chinese technological innovation.

  1. Cost savings through innovative technologies

    International Nuclear Information System (INIS)

    Lankford, J.M.; Jackson, J.P.

    1995-01-01

    Newly developed technologies can and already are saving money. Other technologies under development will provide solutions to problems which are currently impossible or too expensive to address, and still others will offer alternative strategies where baseline approaches are not acceptable to the public. All of these options will be considered as the nation decides what it wishes to accomplish, and fund, to clean up the nuclear weapons complex

  2. Technological Innovation for China’s Logistics Industry

    Directory of Open Access Journals (Sweden)

    Chieh-Yu Lin

    2008-01-01

    Full Text Available China’s logistics industry has started to pay attention to adopt more efficient logistics technologies to provide better services for their customers. This paper employes the questionnaire survey to study the factors influencing the adoption of technological innovations by logistics service providers in China as well as the influences of technological innovation on supply chain performance. Technological innovations are categorized into data acquisition technologies, information technologies, warehousing technologies, and transportation technologies. The results show that the adoption of technological innovations is significantly influenced by technological, organizational and environmental factors, and adopting innovative technologies will increase supply chain performance for the logistics industry in China.

  3. Cone penetrometer: Innovative technology summary report

    International Nuclear Information System (INIS)

    1996-04-01

    Cone penetrometer technology (CPT) provides cost-effective, real-time data for use in the characterization of the subsurface. Recent innovations in this baseline technology allow for improved access to the subsurface for environmental restoration applications. The technology has been improved by both industry and government agencies and is constantly advancing due to research efforts. The U.S. Department of Energy (DOE) Office of Science and Technology (formerly Technology Development) has contributed significantly to these efforts. This report focuses on the advancements made in conjunction with DOE's support but recognizes Department of Defense (DOD) and industry efforts

  4. Innovative Technology Development Program. Final summary report

    International Nuclear Information System (INIS)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program. The plan is part of the DOE's program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE's clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process

  5. The role of innovative remediation technologies

    International Nuclear Information System (INIS)

    Doesburg, J.M.

    1992-05-01

    There are currently over 1200 sites on the US Superfund's National Priorities List (NPL) of hazardous waste sites, and there are over 30, 000 sites listed by the Comprehensive Environmental Responsibility, Compensation and Liability Information System (CERCLIS). The traditional approach to remediating sites in the US has been to remove the material and place it in a secure landfill, or in the case of groundwater, pump and treat the effluent. These technologies have proven to be very expensive and don't really fix the problem. The waste is just moved from one place to another. In recent years, however, alternative and innovative technologies have been increasingly used in the US to replace the traditional approaches. This paper will focus on just such innovative remediation technologies in the US, looking at the regulatory drivers, the emerging technologies, some of the problems in deploying technologies, and a case study

  6. Technological Innovation – A Route Towards Sustainability

    Directory of Open Access Journals (Sweden)

    Gráinne Kavanagh

    2012-06-01

    Full Text Available The sustainability of small and medium-sized enterprises (SMEs  is constantly challenged on today’s dynamic operating environment. Evolving regulatory trends, difficult economic conditions, and diminishing natural resources, pose serious questions for all players across the food system. Technological innovation, as a means of ensuring future sustainability in the same in the face of such challenges, has been the focus of significant government investment in Ireland. This paper, aims to facilitate a greater understanding of the motivations and barriers influencing the decision by food SMEs to invest in technological innovation emanating from research conducted in publicly‐funded research institutes.

  7. Innovative Technology in Engineering Education.

    Science.gov (United States)

    Fishwick, Wilfred

    1991-01-01

    Discusses the impact that computer-assisted technologies, including applications to software, video recordings, and satellite broadcasts, have had upon the conventions and procedures within engineering education. Calls for the complete utilization of such devices through their appropriate integration into updated education activities effectively…

  8. Collective intelligence for translational medicine: Crowdsourcing insights and innovation from an interdisciplinary biomedical research community.

    Science.gov (United States)

    Budge, Eleanor Jane; Tsoti, Sandra Maria; Howgate, Daniel James; Sivakumar, Shivan; Jalali, Morteza

    2015-01-01

    Translational medicine bridges the gap between discoveries in biomedical science and their safe and effective clinical application. Despite the gross opportunity afforded by modern research for unparalleled advances in this field, the process of translation remains protracted. Efforts to expedite science translation have included the facilitation of interdisciplinary collaboration within both academic and clinical environments in order to generate integrated working platforms fuelling the sharing of knowledge, expertise, and tools to align biomedical research with clinical need. However, barriers to scientific translation remain, and further progress is urgently required. Collective intelligence and crowdsourcing applications offer the potential for global online networks, allowing connection and collaboration between a wide variety of fields. This would drive the alignment of biomedical science with biotechnology, clinical need, and patient experience, in order to deliver evidence-based innovation which can revolutionize medical care worldwide. Here we discuss the critical steps towards implementing collective intelligence in translational medicine using the experience of those in other fields of science and public health.

  9. Combining the technological innovation systems framework with the entrepreneurs’ perspective on innovation

    NARCIS (Netherlands)

    Planko, Julia; Cramer, Jacqueline; Hekkert, Marko P.; Chappin, Maryse M H

    2017-01-01

    For their technological sustainability innovations to become successful, entrepreneurs can strategically shape the technological field in which they are involved. The technological innovation systems (TISs) literature has generated valuable insights into the processes which need to be stimulated for

  10. Policies for the Energy Technology Innovation System (ETIS)

    NARCIS (Netherlands)

    Grubler, A.; Aguayo, F.; Gallagher, K.; Hekkert, M.P.; Jiang, K.; Mytelka, L.; Neij, L.; Nemet, G.; Wilson, C.

    2012-01-01

    Innovation and technological change are integral to the energy system transformations described in the Global Energy Assessment (GEA) pathways. Energy technology innovations range from incremental improvements to radical breakthroughs and from technologies and infrastructure to social institutions

  11. Manufacturing Innovation and Technological Superiority

    Science.gov (United States)

    2016-09-01

    The technologies of interest are deter- mined by an expert interagency body with industry input. Focus areas include lightweight alloys, digitization...35—Northrop Grumman and BAE—are all making investments that will reduce government cost and achieve a higher return for the industry participants...all the equipment that we acquired to test once the wall came down and the Russians were desper- ate for any source of cash . The other was at the

  12. Innovative Technology Summary Report (ITSR)

    International Nuclear Information System (INIS)

    1999-01-01

    This section summarizes the demonstration of an Infrared-based Non-Intrusive Liquid Level Detection Technology (NLLDT) at the 221-U Facility located within the Hanford site. This demonstration was conducted by Infrared, Inc. of Reno Nevada in conjunction with Bechtel Hanford Inc. (Environmental Restoration Contractor) and DOE Engineers. The Infrared Imaging System demonstrated by Infrared, Inc. provides an attractive alternative to the baseline technology which employs mechanical methods of opening vessels to detect liquid level. An Infrared Imaging Systems is able to exploit the variations in physical properties of tanks, vessels and piping systems and the enclosed liquid and air to produce clearly defined locations of liquids, if they exist. For decontamination and commissioning (D and D) projects, the use of the NLLDT System to detect liquids in vessels eliminates the need to physically open and inspect these vessels. Risks to workers associated with gaining access to these type objects and the possible exposure to radioactive or contaminated materials can nearly be eliminated. This demonstration was conducted with the goal of characterizing a number of target vessels located on the deck of the 221 U Facility. This technology is suitable for DOE nuclear facilities D and D sites or similar public or commercial sites that must be decontaminated

  13. User driven innovation in mobile technologies?

    DEFF Research Database (Denmark)

    Larsen, Casper Schultz; Koch, Christian

    2007-01-01

    by systems already in function. Stories of prior business successes can be an important tool to ensure further innovative investments since lack of enterprise strategies is often an obstacle for innovation, especially user driven. Both small and large software houses develops dedicated software for coupling...... technology systems relying on the concept of affordance. This paper examines how innovation processes mediate between user orientations and technology offers. There is a great potential for mobile handheld ICT-systems to support numerous work processes in the AEC-industry and this can be substantiated...... site practises, and headquarters - inspired by specific user needs for optimizing work processes. The most important mechanisms evoked for creating the mediating found in the paper are ‘hybrids’ where professionals from AEC establishes a software house, developing ICT-products for specific on...

  14. Centrifugal shot blasting. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-07-01

    At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer

  15. Emerging technologies, innovative teachers and moral cohesion

    CSIR Research Space (South Africa)

    Batchelor, J

    2012-05-01

    Full Text Available efficacy when they engage with emerging technologies. The concept of moral cohesion is further expanded and forms the main focus of this article. Keywords: emerging technologies, innovative teachers, moral cohesion, pedagogies, ethics, teacher.... African Renaissance and teacher disposition is identified as the strongest drivers. Teacher training forms the link between the strong drivers and the outcomes manifest as Stewardship and ethical considerations. 3.2 Professional Burden The theme...

  16. Health, Work Intensity, and Technological Innovations

    OpenAIRE

    Raouf Boucekkine; Natali Hritonenko; Yuri Yatsenko

    2013-01-01

    Work significantly affects human life and health. Overworking may decrease the quality of life and cause direct economic losses. Technological innovations encourage modernization of firms' capital and improve labor productivity in the workplace. The paper investigates the optimal individual choice of work intensity under improving technology embodied in new equipment leading to shorter lifetime of capital goods (obsolescence). The balanced growth trajectories are analyzed in this context to f...

  17. Technology innovation, human resources and dysfunctional integration

    DEFF Research Database (Denmark)

    Madsen, Arne Stjernholm; Ulhøi, John Parm

    2005-01-01

    (Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self...

  18. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  19. Motivating Instructors through Innovative Technology and Pedagogy

    Science.gov (United States)

    Weber, Nicole L.; Barth, Dylan J.

    2016-01-01

    Members of the UWM CETL online and blended faculty development team share innovative technological and pedagogical strategies that they currently utilize to motivate and assist instructors in developing courses for the online or blended environments, and they discuss the lessons learned from incorporating active learning, open content, bring your…

  20. The technological innovation case of the KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J. I. [Habat Univ., Daejeon (Korea, Republic of); Jang, S. K. [Sungkonghoe Univ., Seoul (Korea, Republic of); Hong, K. P. [Baekseok Univ., Chunan (Korea, Republic of); Lee, E. S. [National Fusion Research Institue, Daejeon (Korea, Republic of)

    2008-01-15

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge.

  1. Technology for Innovation in Radiation Oncology

    Energy Technology Data Exchange (ETDEWEB)

    Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Martel, Mary K., E-mail: mmartel@mdanderson.org [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Jaffray, David A. [Departments of Radiation Oncology and Medical Biophysics, Princess Margaret Hospital, Toronto, Ontario (Canada); Benedict, Stanley H. [Department of Radiation Oncology, University of California – Davis Cancer Center, Sacramento, California (United States); Hahn, Stephen M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Berbeco, Ross [Department of Radiation Oncology, Brigham and Women' s Hospital, Boston, Massachusetts (United States); Deye, James [Radiation Research Programs, National Cancer Institute, Bethesda, Maryland (United States); Jeraj, Robert [Department of Medical Physics, University of Wisconsin, Madison, Wisconsin (United States); Kavanagh, Brian [Department of Radiation Oncology, University of Colorado, Aurora, Colorado (United States); Krishnan, Sunil [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Lee, Nancy [Department of Radiation Oncology, Memorial Sloan Kettering Cancer Center, New York, New York (United States); Low, Daniel A. [Department of Radiation Oncology, University of California – Los Angeles, Los Angeles, California (United States); Mankoff, David [Department of Radiology, University of Washington Medical School, Seattle, Washington (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina Hospitals, Chapel Hill, North Carolina (United States); Ollendorf, Daniel [Institute for Clinical and Economic Review, Boston, Massachusetts (United States); and others

    2015-11-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

  2. Technology for Innovation in Radiation Oncology.

    Science.gov (United States)

    Chetty, Indrin J; Martel, Mary K; Jaffray, David A; Benedict, Stanley H; Hahn, Stephen M; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A; Mankoff, David; Marks, Lawrence B; Ollendorf, Daniel; Paganetti, Harald; Ross, Brian; Siochi, Ramon Alfredo C; Timmerman, Robert D; Wong, John W

    2015-11-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled "Technology for Innovation in Radiation Oncology," which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Technology for Innovation in Radiation Oncology

    International Nuclear Information System (INIS)

    Chetty, Indrin J.; Martel, Mary K.; Jaffray, David A.; Benedict, Stanley H.; Hahn, Stephen M.; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A.; Mankoff, David; Marks, Lawrence B.; Ollendorf, Daniel

    2015-01-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

  4. Research on process management of nuclear power technological innovation

    International Nuclear Information System (INIS)

    Yang Hua; Zhou Yu

    2005-01-01

    Different from the other technological innovation processes, the technological innovation process of nuclear power engineering project is influenced deeply by the extensive environmental factors, the technological innovation of nuclear power engineering project needs to make an effort to reduce environmental uncertainty. This paper had described the mechanism of connection technological innovation process of nuclear power engineering project with environmental factors, and issued a feasible method based on model of bargaining to incorporate technological innovation process management of nuclear power engineering project with environmental factors. This method has realistic meanings to guide the technological innovation of nuclear power engineering project. (authors)

  5. Work and technological innovation in organic agriculture.

    Science.gov (United States)

    Tereso, M J A; Abrahão, R F; Gemma, S F B; Montedo, U B; Menegon, N L; Guarneti, J E; Ribeiro, I A V

    2012-01-01

    Organic agriculture is a sustainable cultivation ecologically, economically and socially. Several researches in organic agriculture have been made from technical perspectives, economic traits or related to ecological aspects. There are practically no investigations into the nature of the technology used in organic agriculture, especially from an ergonomic perspective. From the activity analysis, this study aimed to map the technology used in the production of organic vegetables. Properties producing organic vegetables were selected representing the State of São Paulo. It was applied an instrument (questionnaire and semi-structured interview) with their managers and it was made visual records to identify adaptations, innovations and technological demands that simultaneously minimize the workload and the difficulties in performing the tasks and increase work productivity. For some of the technological innovations a digital scanner was used to generate a virtual solid model to facilitate its redesign and virtual prototyping. The main results show that organic farmers have little technology in product form. The main innovations that enable competitive advantage or allow higher labor productivity occur in the form of processes, organization and marketing.

  6. Quantitative Analysis of Technological Innovation in Urology.

    Science.gov (United States)

    Bhatt, Nikita R; Davis, Niall F; Dalton, David M; McDermott, Ted; Flynn, Robert J; Thomas, Arun Z; Manecksha, Rustom P

    2018-01-01

    To assess major areas of technological innovation in urology in the last 20 years using patent and publication data. Patent and MEDLINE databases were searched between 1980 and 2012 electronically using the terms urology OR urological OR urologist AND "surgeon" OR "surgical" OR "surgery". The patent codes obtained were grouped in technology clusters, further analyzed with individual searches, and growth curves were plotted. Growth rates and patterns were analyzed, and patents were correlated with publications as a measure of scientific support and of clinical adoption. The initial search revealed 417 patents and 20,314 publications. The top 5 technology clusters in descending order were surgical instruments including urinary catheters, minimally invasive surgery (MIS), lasers, robotic surgery, and image guidance. MIS and robotic surgery were the most emergent clusters in the last 5 years. Publication and patent growth rates were closely correlated (Pearson coefficient 0.78, P innovation and adoption into clinical practice. Patent metrics identify emergent technological innovations and such trends are valuable to understand progress in the field of urology. New surgical technologies like robotic surgery and MIS showed exponential growth in the last decade with good scientific vigilance. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Innovations in Balloon Catheter Technology in Rhinology.

    Science.gov (United States)

    D'Anza, Brian; Sindwani, Raj; Woodard, Troy D

    2017-06-01

    Since being introduced more than 10 years ago, balloon catheter technology (BCT) has undergone several generations of innovations. From construction to utilization, there has been a myriad of advancements in balloon technology. The ergonomics of the balloon dilation systems have improved with a focus on limiting the extra assembly. "Hybrid" BCT procedures have shown promise in mucosal preservation, including treating isolated complex frontal disease. Multiple randomized clinical trials report improved long-term outcomes in stand-alone BCT, including in-office use. The ever-expanding technological innovations ensure BCT will be a key component in the armamentarium of the modern sinus surgeon. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Kazakhstan innovation projects in nuclear technologies field

    International Nuclear Information System (INIS)

    Shkol'nik, V.S.; Tukhvatulin, Sh.T.

    2005-01-01

    At present in the Republic of Kazakhstan in preparation and realization stage there are several innovation projects related with use of advanced nuclear technologies. Projects are as follows: 'Implementation of Kazakhstan thermonuclear reactor tokamak (KTM)'; 'Implementation at the L.N. Gumilev Eurasian National University the inter-disciplinary research complex on the heavy ions accelerator base'; 'Development of the Technological Park 'Nuclear Technologies Center in Kurchatov city'; 'Development the first in the Central-Asian region Center of Nuclear Medicine and Biophysics'. The initiator and principal operator of these projects is the National Nuclear Center of the Republic of Kazakhstan

  9. Disruptive Innovation in Air Measurement Technology: Reality ...

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innovation for the air pollution measurement field. The intended audience is primarily those with experience in air pollution measurement methods, but much of the talk is accessible to the general public. This is a keynote presentation on emerging air monitoring technology, to be provided at the AWMA measurements conference in March, 2016.

  10. Technology Transmission Across National Innovation Systems

    DEFF Research Database (Denmark)

    Haakonsson, Stine Jessen; Slepniov, Dmitrij

    This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

  11. Technology Transmission Across National Innovation Systems

    DEFF Research Database (Denmark)

    Haakonsson, Stine Jessen; Slepniov, Dmitrij

    2018-01-01

    This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

  12. Grounding the Innovation of Future Technologies

    Directory of Open Access Journals (Sweden)

    Antti Oulasvirta

    2005-01-01

    Full Text Available Mobile and ubiquitous technologies can potentially change the role of information and communication technology in human lives. Empirical, human-centered approaches are emerging as an alternative to technology-driven approaches in the innovation of these technologies. Three necessary empirical stages, intertwined with analytical ones and with each informing and grounding the succeeding stages, are analyzed. First, needfinding is utilized to discover societal and individual demands for technology. Second, observational and experimental studies examine the social and cognitive preconditions for interaction. From these two steps, a hypothesis is formulated regarding how technology will change existing practices. Finally, this hypothesis, embodied in the design of a prototype, is tested in a field trial. Four design cases illustrate the value of empirical grounding.

  13. Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

    OpenAIRE

    Kieft, A.C.

    2017-01-01

    The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS theoretical framework that facilitates the identification of inhibiting problems and the formulation of interventions. Theoretical adaptations and extensions are proposed and their merits subsequent...

  14. Which One Triggers the Other? Technological or Social Innovation

    Science.gov (United States)

    Bulut, Cagri; Eren, Hakan; Halac, Duygu Seckin

    2013-01-01

    The term "innovation" has sometimes been used as a synonym for technological innovation until the concept of "social innovation" attracted academic attention. Since then, these two types of innovation have been investigated individually. It can be claimed that, despite the great importance of social innovation studies,…

  15. Sources of innovation in agricultural technology

    Energy Technology Data Exchange (ETDEWEB)

    Biggs, S D; Clay, E J

    1981-04-01

    This paper focuses attention on environmental and biological characteristics of agriculture which shape the process of technical innovation. The interaction of natural selection and human purposive selection and experimentation is shown to result in a continuous process of innovation placing farmers in the informal R and D systems as well as scientists in formal R and D systems in an innovative treadmill. The importance and limitations of informal R and D are reviewed. A discussion of the characteristics and potential of formal R and D systems leads to the identification of some major problems of policy inherent in, and specific to, the organization and management of agricultural research resources. These include: genetic vulnerability, choices between environmentally specific or widely adapted technologies, the location of research activity, the linkages between agricultural producers and scientists, and methods for maintaining and strengthening informal R and D systems. 58 references, 2 figures.

  16. The Center for Environmental Technology Innovative Technology Screening Process

    International Nuclear Information System (INIS)

    Bertrand, C.M.

    1995-02-01

    The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

  17. Innovative sport technology through cross-disciplinary research ...

    African Journals Online (AJOL)

    Innovative sport technology through cross-disciplinary research: Future of sport ... South African Journal for Research in Sport, Physical Education and Recreation ... of the advantages and disadvantages of innovative sport technology brought ...

  18. Current practice of public involvement activities in biomedical research and innovation: a systematic qualitative review.

    Science.gov (United States)

    Lander, Jonas; Hainz, Tobias; Hirschberg, Irene; Strech, Daniel

    2014-01-01

    A recent report from the British Nuffield Council on Bioethics associated 'emerging biotechnologies' with a threefold challenge: 1) uncertainty about outcomes, 2) diverse public views on the values and implications attached to biotechnologies and 3) the possibility of creating radical changes regarding societal relations and practices. To address these challenges, leading international institutions stress the need for public involvement activities (PIAs). The objective of this study was to assess the state of PIA reports in the field of biomedical research. PIA reports were identified via a systematic literature search. Thematic text analysis was employed for data extraction. After filtering, 35 public consultation and 11 public participation studies were included in this review. Analysis and synthesis of all 46 PIA studies resulted in 6 distinguishable PIA objectives and 37 corresponding PIA methods. Reports of outcome translation and PIA evaluation were found in 9 and 10 studies respectively (20% and 22%). The paper presents qualitative details. The state of PIAs on biomedical research and innovation is characterized by a broad range of methods and awkward variation in the wording of objectives. Better comparability of PIAs might improve the translation of PIA findings into further policy development. PIA-specific reporting guidelines would help in this regard. The modest level of translation efforts is another pointer to the "deliberation to policy gap". The results of this review could inform the design of new PIAs and future efforts to improve PIA comparability and outcome translation.

  19. Do Public Involvement Activities in Biomedical Research and Innovation Recruit Representatively? A Systematic Qualitative Review.

    Science.gov (United States)

    Lander, Jonas; Hainz, Tobias; Hirschberg, Irene; Bossert, Sabine; Strech, Daniel

    2016-01-01

    Public involvement activities (PIAs) may contribute to the governance of ethically challenging biomedical research and innovation by informing, consulting with and engaging the public in developments and decision-making processes. For PIAs to capture a population's preferences (e.g. on issues in whole genome sequencing, biobanks or genome editing), a central methodological requirement is to involve a sufficiently representative subgroup of the general public. While the existing literature focusses on theoretical and normative aspects of 'representation', this study assesses empirically how such considerations are implemented in practice. It evaluates how PIA reports describe representation objectives, the recruitment process and levels of representation achieved. PIA reports were included from a systematic literature search if they directly reported a PIA conducted in a relevant discipline such as genomics, biobanks, biotechnology or others. PIA reports were analyzed with thematic text analysis. The text analysis was guided by an assessment matrix based on PIA-specific guidelines and frameworks. We included 46 relevant reports, most focusing on issues in genomics. 27 reports (59%) explicitly described representation objectives, though mostly without adjusting eligibility criteria and recruiting methods to the specific objective. 11 reports (24%) explicitly reported to have achieved the intended representation; the rest either reported failure or were silent on this issue. Representation of study samples in PIAs in biomedical research and innovation is currently not reported systematically. Improved reporting on representation would not only improve the validity and value of PIAs, but could also contribute to PIA results being used more often in relevant policy and decision-making processes. © 2016 S. Karger AG, Basel.

  20. Science, Technology and Innovation Policy Research Organization

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce financement contribuera à renforcer le rôle de la Science, Technology and Innovation Policy Research Organization (STIPRO) en tant qu'organisme crédible de recherche sur les politiques publiques en Tanzanie, en améliorant sa capacité à fournir des recherches de qualité supérieure, influentes et utiles en matière de ...

  1. Technological Innovation and Strategic Human Resource Management: Developing a Theory.

    Science.gov (United States)

    Gattiker, Urs E.

    Technological innovation affects the structure and content of jobs. Research indicates that there is a need for a theory of technological innovation and strategic human resource management considering several factors, such as an employee's beliefs about the effect of technological innovations on the quality of work life and work content.…

  2. Innovations in food technology for health.

    Science.gov (United States)

    Hsieh, Yun-Hwa Peggy; Ofori, Jack Appiah

    2007-01-01

    Modern nutritional science is providing ever more information on the functions and mechanisms of specific food components in health promotion and/or disease prevention. In response to demands from increasingly health conscious consumers, the global trend is for food industries to translate nutritional information into consumer reality by developing food products that provide not only superior sensory appeal but also nutritional and health benefits. Today's busy life styles are also driving the development of healthy convenience foods. Recent innovations in food technologies have led to the use of many traditional technologies, such as fermentation, extraction, encapsulation, fat replacement, and enzyme technology, to produce new health food ingredients, reduce or remove undesirable food components, add specific nutrient or functional ingredients, modify food compositions, mask undesirable flavors or stabilize ingredients. Modern biotechnology has even revolutionized the way foods are created. Recent discoveries in gene science are making it possible to manipulate the components in natural foods. In combination with biofermentation, desirable natural compounds can now be produced in large amounts at a low cost and with little environmental impact. Nanotechnology is also beginning to find potential applications in the area of food and agriculture. Although the use of new technologies in the production of health foods is often a cause for concern, the possibility that innovative food technology will allow us to produce a wide variety of food with enhanced flavor and texture, while at the same time conferring multiple health benefits on the consumer, is very exciting.

  3. Emerging Technological Risk Underpinning the Risk of Technology Innovation

    CERN Document Server

    Anderson, Stuart

    2012-01-01

    Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

  4. Essays on Energy Technology Innovation Policy

    Science.gov (United States)

    Chan, Gabriel Angelo Sherak

    Motivated by global climate change, enhancing innovation systems for energy technologies is seen as one of the largest public policy challenges of the near future. The role of policy in enhancing energy innovation systems takes several forms: public provision of research and develop funding, facilitating the private sector's capability to develop new technologies, and creating incentives for private actors to adopt innovative and appropriate technologies. This dissertation explores research questions that span this range of policies to develop insights in how energy technology innovation policy can be reformed in the face of climate change. The first chapter of this dissertation explores how decision making to allocate public research and development funding could be improved through the integration of expert technology forecasts. I present a framework to evaluate and optimize the U.S. Department of Energy's research and development portfolio of applied energy projects, accounting for spillovers from technical complimentary and competition for the same market share. This project integrates one of the largest and most comprehensive sets of expert elicitations on energy technologies (Anadon et al., 2014b) in a benefit evaluation framework. This work entailed developing a new method for probability distribution sampling that accommodates the information that can be provided by expert elicitations. The results of this project show that public research and development in energy storage and solar photovoltaic technologies has the greatest marginal returns to economic surplus, but the methodology developed in this chapter is broadly applicable to other public and private R&D-sponsoring organizations. The second chapter of this dissertation explores how policies to transfer technologies from federally funded research laboratories to commercialization partners, largely private firms, create knowledge spillovers that lead to further innovation. In this chapter, I study the U

  5. Biomedical engineering principles of modern cochlear implants and recent surgical innovations.

    Science.gov (United States)

    Eshraghi, Adrien A; Gupta, Chhavi; Ozdamar, Ozcan; Balkany, Thomas J; Truy, Eric; Nazarian, Ronen

    2012-11-01

    This review covers the most recent clinical and surgical advances made in the development and application of cochlear implants (CIs). In recent years, dramatic progress has been made in both clinical and basic science aspect of cochlear implantation. Today's modern CI uses multi-channel electrodes with highly miniaturized powerful digital processing chips. This review article describes the function of various components of the modern multi-channel CIs. A selection of the most recent clinical and surgical innovations is presented. This includes the preliminary results with electro-acoustic stimulation or hybrid devices and ongoing basic science research that is focused on the preservation of residual hearing post-implantation. The result of an original device that uses a binaural stimulation mode with a single implanted receiver/stimulator is also presented. The benefit and surgical design of a temporalis pocket technique for the implant's receiver stimulator is discussed. Advances in biomedical engineering and surgical innovations that lead to an increasingly favorable clinical outcome and to an expansion of the indication of CI surgery are presented and discussed. Copyright © 2012 Wiley Periodicals, Inc.

  6. Model for acquiring innovative waste immobilization technologies

    International Nuclear Information System (INIS)

    Dole, L.R.; Singh, S.P.N.

    1988-01-01

    The US Department of Energy's (DOE's) Oak Ridge Operations (ORO) has established the Waste Management Technology Center (WMTC) at Oak Ridge National Laboratory to assist in meeting the environmental requirements for federal facilities as stated in the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The WMTC will bring innovative mixed chemical and radioactive waste treatment and site closure technologies to bear on the many mixed chemical and radioactive waste problems at the DOE-ORO facilities located in Tennessee, Kentucky, and Ohio. The WMTC seeks innovative technologies through a phased procurement cycle that encourages the teaming of emerging technologies with experienced contractors in order to comply with on-site requirements of DOE orders concerning protection of the environment. This three-phase procurement cycle includes: (1) a feasibility study and implementation plan, (2) an on-site pilot demonstration, and (3) full-scale implementation. This paper describes the statements of work for some related demonstrations and remedial actions

  7. Innovative technologies for in-situ remediation

    International Nuclear Information System (INIS)

    Ragaini, R.; Aines, R.; Knapp, R.; Matthews, S.; Yow, J.

    1994-06-01

    LLNL is developing several innovative remediation technologies as long-term improvements to the current pump and treat approaches to cleaning up contaminated soils and groundwater. These technologies include dynamic underground stripping, in-situ microbial filters, and remediation using bremsstrahlung radiation. Concentrated underground organic contaminant plumes are one of the most prevalent groundwater contamination sources. The solvent or fuel can percolate deep into the earth, often into water-bearing regions. Collecting as a separate, liquid organic phase called dense non-aqueous-phase liquids (DNAPLs), or light NAPLs (LNAPLs), these contaminants provide a source term that continuously compromises surrounding groundwater. This type of spill is one of the most difficult environmental problems to remediate. Attempts to remove such material requires a huge amount of water which must be washed through the system to clean it, requiring decades. Traditional pump and treat approaches have not been successful. LLNL has developed several innovative technologies to clean up NAPL contamination. Detailed descriptions of these technologies are given

  8. Developing innovative environmental technologies for DOE needs

    International Nuclear Information System (INIS)

    Devgun, J.S.; Sewell, I.O.; DeGregory, J.

    1995-01-01

    Environmental restoration and waste management activities at US Department of Energy (DOE) facilities are diverse and complex. Contamination at DOE sites and facilities includes radionuclides, chlorinated hydrocarbons, volatile organic compounds, non-aqueous phase liquids, and heavy metals, among others. Soil and groundwater contamination are major areas of concern and DOE has focused very significant efforts in these areas. Relevant technology development activities are being conducted at DOE's own national laboratories, as well as through collaborative efforts with other federal agencies and the private sector. These activities span research and development (R ampersand D) of new concepts and techniques to demonstration and commercialization of mature technologies. Since 1990, DOE has also supported R ampersand D of innovative technologies through interagency agreements with US Environmental Protection Agency (EPA), US Department of Defense, the National Science Foundation, and others

  9. Combining expedited cleanup with innovative technology demonstrations

    International Nuclear Information System (INIS)

    Hagood, M.C.; Rohay, V.J.; Valcich, P.J.; Brouns, T.M.; Cameron, R.J.

    1993-04-01

    A Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) expedited response action (ERA) has been initiated at the Hanford Site, Washington, for the removal of carbon tetrachloride from contaminated soils to mitigate further contamination of the groundwater. Soil vapor extraction with aboveground collection and treatment was chosen as the preferred remedial technology for the first phase of the ERA. At the same time, innovative technology demonstrations are being conducted in coordination with the ERA to determine the viability of emerging technologies that can be used to characterize, remediate, and monitor carbon tetrachloride and cocontaminants. The overall goal is to improve the performance and decrease the costs of carbon tetrachloride remediation while maintaining a safe working environment

  10. Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

    CERN Document Server

    Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

    2016-01-01

    This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

  11. Technology innovation in an integrated energy economy

    International Nuclear Information System (INIS)

    Isaacs, E.

    2006-01-01

    A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs

  12. New Technologies, Old Habits: Automation without Innovation

    Directory of Open Access Journals (Sweden)

    José Osvaldo De Sordi

    2012-01-01

    Full Text Available This research investigated the underuse of technological tools by innovative organizations which are acknowledged for their use of and familiarity with new technologies. The research conducted an analysis of 58 institutional repositories (IRs out of 43 educational and research institutions which are internationally renowned for excellence. The core aspect of the analysis was the use of IRs for publishing and dealing with evidence in order to legitimize and add value to scientific research. The following items were analyzed: (a the logical structuring of scientific communication published in the IRs; (b the metadata which describe scientific communication based on the terms of the DCMI protocol used; (c the availability of software functions which facilitate the queries and publication of evidences. Results show that the introduction of IRs did not add value to the quality of research in terms of associating and publishing evidence that could back them up. A strong tendency to replicate the traditional library model of physical collections was observed. It was concluded that merely possessing good technological tools is not sufficient for fostering innovation and strategic gains in organizations, even if their implementation takes place in highly promising and favorable environments.

  13. Technology innovation in an integrated energy economy

    Energy Technology Data Exchange (ETDEWEB)

    Isaacs, E. [Alberta Energy Research Inst., Edmonton, AB (Canada)

    2006-07-01

    A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs.

  14. Innovating Education and Educating for Innovation: The Power of Digital Technologies and Skills

    Science.gov (United States)

    OECD Publishing, 2016

    2016-01-01

    OECD's Innovation Strategy calls upon all sectors in the economy and society to innovate in order to foster productivity, growth and well-being. Education systems are critically important for innovation through the development of skills that nurture new ideas and technologies. However, whereas digital technologies are profoundly changing the way…

  15. Steam vacuum cleaning. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. The baseline technology currently used for washing debris is a high-pressure water cleaning (HPWC) system. The system used at the FEMP is the Hotsy reg-sign Model 550B HPWC. Although the HPWC technology has functioned satisfactorily, improvements are being sought in areas related to reduced liquid waste volume, increased productivity, increased washing effectiveness, and decreased airborne contamination. An innovative technology that offers potential improvements in these areas is a steam vacuum cleaning (SVC) system that integrates high-pressure steam cleaning with a vacuum recovery sub-system that simultaneously collects dislodged contaminants thereby reducing airborne contamination. The SVC system selected for demonstration at the FEMP was the Kelly trademark Decontamination System shown. This report provides comparative performance and cost analyses between the Hotsy HPWC system and the Kelly Decontamination System. Both technologies were demonstrated at the FEMP site located at Fernald, Ohio from July 29, 1996 through August 15, 1996. The demonstrations were conducted at the FEMP Plant 1 as part of the LSTD project sponsored by the Deactivation and Decommissioning Focus Area (DDFA) of the US DOE's Office of Science and Technology

  16. Non-invasive biomedical research and diagnostics enabled by innovative compact lasers

    Science.gov (United States)

    Litvinova, Karina S.; Rafailov, Ilya E.; Dunaev, Andrey V.; Sokolovski, Sergei G.; Rafailov, Edik U.

    2017-11-01

    For over half a century, laser technology has undergone a technological revolution. These technologies, particularly semiconductor lasers, are employed in a myriad of fields. Optical medical diagnostics, one of the emerging areas of laser application, are on the forefront of application around the world. Optical methods of non- or minimally invasive bio-tissue investigation offer significant advantages over alternative methods, including rapid real-time measurement, non-invasiveness and high resolution (guaranteeing the safety of a patient). These advantages demonstrate the growing success of such techniques. In this review, we will outline the recent status of laser technology applied in the biomedical field, focusing on the various available approaches, particularly utilising compact semiconductor lasers. We will further consider the advancement and integration of several complimentary biophotonic techniques into single multimodal devices, the potential impact of such devices and their future applications. Based on our own studies, we will also cover the simultaneous collection of physiological data with the aid a multifunctional diagnostics system, concentrating on the optimisation of the new technology towards a clinical application. Such data is invaluable for developing algorithms capable of delivering consistent, reliable and meaningful diagnostic information, which can ultimately be employed for the early diagnosis of disease conditions in individuals from around the world.

  17. Software engineering technology innovation: Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, H.T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  18. Software engineering technology innovation - Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  19. Innovation in Construction: Learning Processes in implementing new Technologies

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is concerned with the question: How do construction firms implement new technology on construction projects? A model of the implementation process is presented based on a review of the construction innovation literature, innovation theory, and organisational learning theories....

  20. Information and Communication Technologies Innovations conference

    CERN Document Server

    Kocarev, Ljupco

    2012-01-01

    Information and Communication Technologies has enlarged its horizon and it is practiced under multidisciplinary contexts that introduce new challenges to theoretical and technical approaches. The most critical benefit of introducing new ICT technologies in our real world living are the new ways of working that the online world makes possible. Complexity, uncertainty and scaling issues of real world problems as well as natural phenomena in ecology, medicine and biology demanding ICT assistance create challenging application domains for artificial intelligence, decision support and intelligence systems, wireless sensor networks, pervasive and ubiquitous computing, multimedia information systems, data management systems, internet and web applications and services, computer networks, security and cryptography, distributed systems, GRID and cloud computing. This book offers a collection of papers presented at the Third International Conference on ICT Innovations held in September 2011, in Skopje, Macedonia. The co...

  1. The Opportunities and Challenges of Persuasive Technology in Creating Sustainable Innovation and Business Model Innovation

    DEFF Research Database (Denmark)

    Aagaard, Annabeth; Lindgren, Peter

    2015-01-01

    The opportunities of persuasive technology in facilitating sustainable innovation and business model innovation have been witnessed continuously during the last decade. The unique ability of persuasive technology in interacting and mediating across users, customers, decisions makers and other...... stakeholders provides access to core knowledge about behavior and opportunities to influence and even change their behavior in a positive and more sustainable manner. Sustainable innovation and business model innovation is gaining more and more competitive leverage due to customer requirements, the growing...

  2. Progress in JT-60 innovative technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-09-01

    This review report provides the synthetic archives of innovative technologies in 20-year facility developments for the large tokamak experimental device JT-60, first founded as the major magnetic fusion device in the Second Basic Program for Fusion Research and Development of Japan. Manufacture of JT-60 was started in 1978, and the first plasma was achieved on April 8, 1985. In 1989-1991, the vacuum vessel and poloidal field coils were entirely reconfigured to improve the plasma performance. The major original mission of the JT-60 project, a breakeven condition for a D-T equivalent plasma, was finally attained in 1996. After this, JT-60, as a leading device for magnetic fusion research in the world, continues to challenge many experimental issues, which has been achieved by collaboration of innovative facility developments and experimental improvements. In addition, at this time to start the ITER construction phase in 2005, this review is expected to contribute the construction and operation activities for the next generation tokamak by providing the basic ideas in facility developments. We classified a tremendous number of development items into the selected sections for this review. Since the authors have been in charge of each development activity of their own, the contents are full of essential stories, points, and keywords in spite of its compact handbook size. We believe this review could provide highly sophisticated, informative ideas matured in JT-60 technological developments. (author)

  3. National Innovation System and Disruptive Innovations in Synthetic Rubber and Tire Technology

    Directory of Open Access Journals (Sweden)

    Ray R. Gehani

    2008-01-01

    Full Text Available The current models of National Innovation Systems (NIS are based on interactions and learning across three institutions: government, university and industry. This empirical study of the evolution of innovations in rubber and tire technologies such as the collaborative innovative suppliers (of raw materials and human capital and disruptive rival innovators to the traditional tri-helical model of National Innovation System. This was empirically examined for the evolution of rubber and tire technology and the rise and decline of its innovative region: the Rubber Capital of the World in Akron, Ohio.

  4. Developing technology intelligence strategy to access knowledge of innovation clusters.

    OpenAIRE

    Rani Jeanne Dang; Letizia Mortara; Ruth Thomson; Tim Minshall

    2010-01-01

    Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic capture and delivery of infor...

  5. Biomedical informatics and the convergence of Nano-Bio-Info-Cogno (NBIC) technologies.

    Science.gov (United States)

    Martin-Sanchez, F; Maojo, V

    2009-01-01

    To analyze the role that biomedical informatics could play in the application of the NBIC Converging Technologies in the medical field and raise awareness of these new areas throughout the Biomedical Informatics community. Review of the literature and analysis of the reference documents in this domain from the biomedical informatics perspective. Detailing existing developments showing that partial convergence of technologies have already yielded relevant results in biomedicine (such as bioinformatics or biochips). Input from current projects in which the authors are involved is also used. Information processing is a key issue in enabling the convergence of NBIC technologies. Researchers in biomedical informatics are in a privileged position to participate and actively develop this new scientific direction. The experience of biomedical informaticians in five decades of research in the medical area and their involvement in the completion of the Human and other genome projects will help them participate in a similar role for the development of applications of converging technologies -particularly in nanomedicine. The proposed convergence will bring bridges between traditional disciplines. Particular attention should be placed on the ethical, legal, and social issues raised by the NBIC convergence. These technologies provide new directions for research and education in Biomedical Informatics placing a greater emphasis in multidisciplinary approaches.

  6. 75 FR 3948 - Big Sky Energy Corp., Biomedical Waste Systems, Inc., Biometrics Security Technology, Inc...

    Science.gov (United States)

    2010-01-25

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Big Sky Energy Corp., Biomedical Waste Systems, Inc., Biometrics Security Technology, Inc., Biosys, Inc., Bolder Technologies Corp., Boyds Wheels, Inc... securities of Biometrics Security Technology, Inc. because it has not filed any periodic reports since...

  7. Technological economics: innovation, project management, and technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, F R

    1981-06-01

    The relationship between economics and technology, as well as their interaction in production, productivity, project management, and in technology transfer processes are reviewed. Over the last two decades there has been an increasing interest by economists in the technologist's view of technical change and its mechanisms. The author looks at the zone between technology and economics, the technological economics, and discusses the theory of innovation recently sketched out by Nelson and Winter. The relevance to project management and technology transfer of contemporary writing by economists leads to the view that there are welcome signs of a convergence of the conceptual models now emerging and the practical problems of technology management and movement. Economists now seem more willing to come to terms with technology than technologists with economics. The economic significance of the multitudes of technically unglamorous activities in development work is seriously neglected as a result of over-emphasis on the spectacular technological break. If economic elegance were to be admitted to the criteria of success, one might get a significant improvement in the engineering of technological change. 29 references, 4 figure.

  8. Information technology, innovation and supply chain structure

    NARCIS (Netherlands)

    Stroeken, J.H.M.

    2000-01-01

    The link between IT, innovation and supply chain structure is central here. This article is divided into three parts. First, a theoretical analysis of the role of IT in innovation processes. Actually, it involves the total innovation of the supply chain, not merely logistic innovation. The

  9. Innovation, Diffusion, and Regulation in Energy Technologies

    Science.gov (United States)

    Fetter, Theodore Robert

    The innovation and diffusion of new technologies is one of the central concerns of economics. New inventions or technological combinations do not spring fully formed into the world; as firms encounter and learn about new technologies they experiment, refine, and learn about them, improving productivity (and sometimes earning economic rents). Understanding the processes by which firms learn, and how these processes interact with regulations, is fundamental to understanding the emergence of new technologies, their contribution to growth, and the interaction of innovation and regulation. This dissertation addresses how firms learn and respond to regulations in the context of emerging technologies. Within this framework, I address several questions. When production inputs are socially controversial, do firms respond to disclosure laws by voluntarily constraining their inputs? Do these public disclosure laws facilitate knowledge transmission across firms, and if so, what are the implications for public welfare - for instance, do the gains from trade outweigh any effects of reduced incentives for innovation? I study these questions in the context of hydraulic fracturing, though the results offer insight for more general settings. Panning out to a much broader view, I also explore how energy-related technologies - in both generation and consumption - diffuse across national boundaries over time, and whether innovation and diffusion of energy-efficient technologies has led to more or less energy-efficient economic growth. In my first paper, I contribute to improved understanding of the conditions in which information-based regulations, which are increasingly common in multiple policy domains, decrease externalities such as environmental pollution. Specifically, I test whether information disclosure regulations applied to hydraulic fracturing chemicals caused firms to decrease their use of toxic inputs. Prior to these mandatory disclosure laws, some operators voluntarily

  10. Sectoral Systems and Innovation and Technology Policy

    Directory of Open Access Journals (Sweden)

    Franco Malerba

    2003-01-01

    Full Text Available Este artigo usa o conceito de sistema setorial de inovações que permite a utilização de uma visão multidimensional integrada e dinâmica da inovação em seus setores. Sistemas setoriais apresentam três dimensões que afetam tanto a geração e adoção de novas tecnologias quanto a organização da inovação e produção nos seguintes níveis setoriais: conhecimento, atores e redes e instituições. O artigo discute o escopo conceitual dos sistemas setoriais, apresenta cinco análises de setores principais e examina suas tendências principais, seus desafios e suas transformações. O artigo também oferece uma análise sobre implicações políticas públicas e sugestões do ponto de vista do sistema setorial de inovações.This paper uses the concept of sectoral system of innovation which aims to provide a multidimensional, integrated and dynamic view of innovation in sectors. Sectoral systems have three dimensions that affect the generation and adoption of new technologies and the organization of innovation and production at the sectoral level: knowledge (and the related boundaries, actors and networks, and institutions. The paper discusses the conceptual framework of sectoral systems, presents five main sectoral systems and examines their major trends, challenges and transformation. The paper then examines which are the main policy implications and indications in a sectoral system perspective.

  11. Reputation for technological innovation: Does it actually cohere with innovative activity?

    Directory of Open Access Journals (Sweden)

    Patrick J. Höflinger

    2018-01-01

    Full Text Available Firms strategically promote, foster and pursue a reputation for technological innovation. Yet, present research did not examine whether such perception actually coheres with innovative activity itself. Previous studies in this field often relied solely on tangible products/product introductions, hence we apply multiple proxies based on a firm's intangible innovative performance to examine the influences on reputation for technological innovation. Using patent, financial and consumer data our Poisson regression analyzes 65 international firms which have been nominated by 231 consumers. We apply time-series and likewise cross-sectional data for our interdisciplinary analysis. Our findings demonstrate that innovative performance (citation intensity is linked to reputation for technological innovation. Counter-intuitively, our results provide evidence that marketing intensity negatively influences a reputation for technological innovation. From the results, we conclude that innovative performance may be associated with a reputation for technological innovation. Actual technological advancement attracts attention from consumers that cannot be purchased with greater marketing investments. This implies that consumers appreciate the costly and uncertain R&D efforts and value those firms that constantly offer innovation. As a theoretical implication, the consideration of intangible inputs for reputation research is an important contribution for a holistic understanding. The results represent essential strategic information for innovation and marketing functions, where both divisions need to align their activities and investments.

  12. Information and Innovation Management within Information Technology Enterprises

    OpenAIRE

    Geoff D. Skinner

    2010-01-01

    Australia, while being a large and eager consumer of innovative and cutting edge Information and Communication Technologies (ICT), continues to struggle to remain a leader in Technological Innovation. This paper has two main contributions to address certain aspects of this complex issue. The first being the current findings of an ongoing research project on Information and Innovation Management in the Australian Information and Communication Technologies (ICT) sector. The...

  13. The development strategy of financial and innovative technologies

    OpenAIRE

    R.V. Lavrov

    2013-01-01

    The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always asso...

  14. Quantification of Technology Innovation Usinga Risk-Based Framework

    OpenAIRE

    Gerard E. Sleefe

    2010-01-01

    There is significant interest in achieving technology innovation through new product development activities. It is recognized, however, that traditional project management practices focused only on performance, cost, and schedule attributes, can often lead to risk mitigation strategies that limit new technology innovation. In this paper, a new approach is proposed for formally managing and quantifying technology innovation. This approach uses a risk-based framework that s...

  15. Raman probe. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-07-01

    The Raman probe is deployed in high-level waste tanks with the cone penetrometer (CPT). These technologies are engineered and optimized to work together. All of the hardware is radiation hardened, designed for and tested in the high-radiation, highly caustic chemical environment of US Department of Energy's (DOE's) waste storage tanks. When deployed in tanks, the system is useful for rapidly assessing the species and concentrations of organic-bearing tank wastes. The CPT was originally developed for geological and groundwater applications, with sensors that measure physical parameters such as soil moisture, temperature, and pH. When deployed, it is hydraulically forced directly into the ground rather than using boring techniques utilized by rotary drilling systems. There is a separate Innovative Technology Summary Report for the CPT, so this report will focus on the changes made specifically to support the Raman probe. The most significant changes involve adapting the Raman probe for in-tank and subsurface field use and developing meaningful real-time data analysis. Testing of the complete LLNL system was conducted in a hot cell in the 222-S Laboratory at the Hanford site in summer 1997. Both instruments were tested in situ on solvent-contaminated soils (TCE and PCE) at the Savannah River Site in February and June 1998. This report describes the technology, its performance, its uses, cost, regulatory and policy issues, and lessons learned

  16. Understanding energy technology developments from an innovation system perspective

    Energy Technology Data Exchange (ETDEWEB)

    Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

    2007-05-15

    With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

  17. Innovation Value of Information Technology: Impact of Information Technology--Intensity on Innovation Capability and Firm Performance

    Science.gov (United States)

    Ramamani, Mahesh Kumar

    2010-01-01

    Though information technology adoptions have been always referred to as innovations in firms, much of the business value literature has concentrated on the tangible and immediately measurable impacts of information technology (IT) adoptions. This study aims to explore the impact of information technology investments on the innovativeness of a…

  18. Towards a synergic innovation management model: the interplay of market, technology, and management innovations

    Directory of Open Access Journals (Sweden)

    Leonard Tchuta

    2017-03-01

    Full Text Available This paper outlines a model of firm innovation management known as the synergic innovation management model. Building on the theory of dynamic capabilities and core competence, the paper suggest three capabilities of firms namely market, technology, management capabilities that drive firms’ innovations. The combination of these three capabilities creates a unique configuration for a firm known as the firm’s core competence that informs the firm's strategic decisions. The synergic innovation management model guides firm in the simultaneous exploration of market, technology, and management innovations required for sustainable business. The paper concludes with limitations of the model and suggestions for further research.

  19. Copper Cable Recycling Technology. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

  20. Innovation Environment in Small Technology-Based Companies

    OpenAIRE

    Gonçalves Silveira Fiates, Gabriela; Azevedo Fiates, José Eduardo; Ribeiro Serra, Fernando A; Portugal Ferreira, Manuel

    2010-01-01

    Innovation has been identified as a strategy to achieve competitive advantage, particularly in contexts of change and especially for technology-based companies – TBCs. Although the adoption of innovation strategies is not easy, small companies have an organizational environment more conducive to innovation. This article examines how managers and employees of small TBCs perceive aspects of the internal environment of innovation in the organization (culture, organizational structure, personnel ...

  1. Venture Leaders Prize for innovative technology projects

    CERN Multimedia

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  2. Biomedical technology transfer: Bioinstrumentation for cardiology, neurology, and the circulatory system

    Science.gov (United States)

    1976-01-01

    Developments in applying aerospace medical technology to the design and production of medical equipment and instrumentation are reported. Projects described include intercranial pressure transducers, leg negative pressure devices, a synthetic speech prosthesis for victims of cerebral palsy, and a Doppler blood flow instrument. Commercialization activities for disseminating and utilizing NASA technology, and new biomedical problem areas are discussed.

  3. Teaching Innovation in High School Technology Classes

    Science.gov (United States)

    Wright, Geoffrey A.; Skaggs, Paul; West, Richard E.

    2013-01-01

    Innovation is central to modern industry. It can and should be taught in schools. Not only does providing students a background in innovation benefit them later in life and industry, but it also promotes and further develops their critical thinking and collaboration skills. Despite the need for innovation, many have struggled with how to teach it.…

  4. Green technology innovation in a developing country

    Science.gov (United States)

    Treesubsuntorn, Chairat; Dolphen, Rujira; Dhurakit, Prapai; Siswanto, Dian; Thiravetyan, Paitip

    2017-11-01

    into plants can enhance airborne pollutant removal. From this research, an indoor air phytoremediation system was developed in order to reduce CO2 emissions with high VOC removal efficiency. The high cost of technology transfer is a major problem, especially in developing countries, and green technology research and innovation can overcome this problem along with efficient allocation of resources and technologies.

  5. From translational research to open technology innovation systems.

    Science.gov (United States)

    Savory, Clive; Fortune, Joyce

    2015-01-01

    The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

  6. SUBSURFACE VOLATIZATION AND VENTILATION SYSTEM (SVVS) - INNOVATIVE TECHNOLOGY REPORT

    Science.gov (United States)

    This report summarizes the findings associated with a Demonstration Test of Environmental Improvement Technologies’ (EIT) Subsurface Volatilization and Ventilation System (SVVS) process. The technology was evaluated under the EPA Superfund Innovative Technology Evaluation (SITE) ...

  7. Seeds of Innovation: Three Years of the Technology Innovation Challenge Grant Program.

    Science.gov (United States)

    Harris, Larry A.

    This publication describes the 62 projects that received 5-year Technology Innovation Challenge Grants beginning in 1995, 1996, and 1997, with reviews of the projects occurring in late 1999 and early 2000. Part 1 of the report describes the Technology Innovation Challenge Grant (TICG) program and its importance. Part 2 contains the project…

  8. The Impact of Technological and Non-Technological Innovations on Firm Growth

    OpenAIRE

    Ali-Yrkkö, Jyrki; Martikainen, Olli

    2008-01-01

    This study investigates the relationship between innovations and firm growth, based on the data of Finnish firms operating in the software industry. We find that in terms of turnover and employment, firms with only technological innovations do not grow more rapidly than other firms. However, firm growth is positively associated with the combination of technological and non-technological innovations.

  9. Challenges to the Indicators on Science, Technology and Innovation Development

    OpenAIRE

    Chobanova, Rossitsa

    2006-01-01

    The paper attempts to define the challenges to the indicators on science, technology and innovation development which result from the contemporary dynamics of the global knowledge based economy progress and the pursued challenges of identification of the specific national priority dimensions for public funding research and innovation projects on the case of Bulgaria. It is argued that recent the most widespread methodologies of positioning science, technology and innovation indicators do not ...

  10. The Impact of Postgraduate Health Technology Innovation Training: Outcomes of the Stanford Biodesign Fellowship.

    Science.gov (United States)

    Wall, James; Hellman, Eva; Denend, Lyn; Rait, Douglas; Venook, Ross; Lucian, Linda; Azagury, Dan; Yock, Paul G; Brinton, Todd J

    2017-05-01

    Stanford Biodesign launched its Innovation Fellowship in 2001 as a first-of-its kind postgraduate training experience for teaching biomedical technology innovators a need-driven process for developing medical technologies and delivering them to patients. Since then, many design-oriented educational programs have been initiated, yet the impact of this type of training remains poorly understood. This study measures the career focus, leadership trajectory, and productivity of 114 Biodesign Innovation Fellowship alumni based on survey data and public career information. It also compares alumni on certain publicly available metrics to finalists interviewed but not selected. Overall, 60% of alumni are employed in health technology in contrast to 35% of finalists interviewed but not selected. On leadership, 72% of alumni hold managerial or higher positions compared to 48% of the finalist group. A total of 67% of alumni reported that the fellowship had been "extremely beneficial" on their careers. As a measure of technology translation, more than 440,000 patients have been reached with technologies developed directly out of the Biodesign Innovation Fellowship, with another 1,000,000+ aided by solutions initiated by alumni after their training. This study suggests a positive impact of the fellowship program on the career focus, leadership, and productivity of its alumni.

  11. Innovative and basic researches for high temperature technologies at HTTR

    International Nuclear Information System (INIS)

    Shiozawa, Shusaku

    1995-01-01

    The HTTR is the first HTGR which is under construction at JAERI. The objectives of the HTTR are to establish basic technologies for HTGRs, to upgrade technologies for HTGRs and to conduct innovative and basic researches for high temperature technologies. The first two are concerned with HTGR developments. The last one is not necessarily for HTGR developments, but for future innovative researches which are expected to be applied to various technologies. (author)

  12. Does Your Department Have a Technology Innovation Strategy?

    Science.gov (United States)

    Felkey, Bill G; Fox, Brent I

    2016-11-01

    There are ways to facilitate the successful implementation of technological innovations. These are especially important in a time of rapid development of new tools to support safe and effective medication therapy. This installment addresses some of the key components of a successful technology innovation strategy.

  13. Innovation of Energy Technologies: the role of taxes

    OpenAIRE

    Copenhagen Economics

    2011-01-01

    The study deals with the links between energy taxation and innovation and presents also new empirical evidence on the impact of energy taxes on patenting activities related to energy technologies. The study suggests that while taxation is a very effective driver of innovation, it can be usefully complemented with other public policy tools, such as public research grants and other technology policies.

  14. School-based data and management of technological innovations in ...

    African Journals Online (AJOL)

    School-based data and management of technological innovations in public secondary schools in Cross River State. ... Global Journal of Educational Research ... Result indicated that: there is no significant positive relationship between school-based data and principals management of technological innovation.

  15. Climatic shocks associate with innovation in science and technology

    NARCIS (Netherlands)

    C.K.W. de Dreu (Carsten); Dijk, M.A. (Mathijs) van

    2018-01-01

    textabstractHuman history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of

  16. 2010 Strategic national plan of Science Technology and Innovation PENCTI

    International Nuclear Information System (INIS)

    2010-07-01

    The document presents the national strategic plan for Science Technology and Innovation, its history, premises, conceptual framework, the starting situation, guiding principles, strategic objectives and priority area such as new energy sources to diversify the national energy matrix, environment environment and preservation of natural resources, governance and private management with increasing levels of dependency with the development of strategic technology knowledge and innovation

  17. Technological Innovation and Cooperation for Foreign Information Access Program

    Science.gov (United States)

    Office of Postsecondary Education, US Department of Education, 2012

    2012-01-01

    The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

  18. Modern technologies for retinal scanning and imaging: an introduction for the biomedical engineer

    Science.gov (United States)

    2014-01-01

    This review article is meant to help biomedical engineers and nonphysical scientists better understand the principles of, and the main trends in modern scanning and imaging modalities used in ophthalmology. It is intended to ease the communication between physicists, medical doctors and engineers, and hopefully encourage “classical” biomedical engineers to generate new ideas and to initiate projects in an area which has traditionally been dominated by optical physics. Most of the methods involved are applicable to other areas of biomedical optics and optoelectronics, such as microscopic imaging, spectroscopy, spectral imaging, opto-acoustic tomography, fluorescence imaging etc., all of which are with potential biomedical application. Although all described methods are novel and important, the emphasis of this review has been placed on three technologies introduced in the 1990’s and still undergoing vigorous development: Confocal Scanning Laser Ophthalmoscopy, Optical Coherence Tomography, and polarization-sensitive retinal scanning. PMID:24779618

  19. Innovative technologies for Faraday shield cooling

    International Nuclear Information System (INIS)

    Rosenfeld, J.H.; Lindemuth, J.E.; North, M.T.; Goulding, R.H.

    1995-01-01

    Alternative advanced technologies are being evaluated for use in cooling the Faraday shields used for protection of ion cyclotron range of frequencies (ICR) antennae in Tokamaks. Two approaches currently under evaluation include heat pipe cooling and gas cooling. A Monel/water heat pipe cooled Faraday shield has been successfully demonstrated. Heat pipe cooling offers the advantage of reducing the amount of water discharged into the Tokamak in the event of a tube weld failure. The device was recently tested on an antenna at Oak Ridge National Laboratory. The heat pipe design uses inclined water heat pipes with warm water condensers located outside of the plasma chamber. This approach can passively remove absorbed heat fluxes in excess of 200 W/cm 2 ;. Helium-cooled Faraday shields are also being evaluated. This approach offers the advantage of no liquid discharge into the Tokamak in the event of a tube failure. Innovative internal cooling structures based on porous metal cooling are being used to develop a helium-cooled Faraday shield structure. This approach can dissipate the high heat fluxes typical of Faraday shield applications while minimizing the required helium blower power. Preliminary analysis shows that nominal helium flow and pressure drop can sufficiently cool a Faraday shield in typical applications. Plans are in progress to fabricate and test prototype hardware based on this approach

  20. Innovation in mathematics education: beyond the technology

    Directory of Open Access Journals (Sweden)

    Salvador Llinares

    2013-06-01

    Full Text Available Relationships between mathematical competence and mathematics teaching innovation do emerge the need for new practices of mathematics teaching. One of the aspects of this new practice is the interaction patterns in the classroom characterizing the mathematical discourse. From these perspectives, the relation between innovation and new mathematics practices defines different contexts for professional development of mathematics teacher.

  1. Bringing to Market Technological Innovation: What Distinguishes Success from Failure

    OpenAIRE

    Frattini, Federico; Massis, Alfredo De; Chiesa, Vittorio; Cassia, Lucio; Campopiano, Giovanna

    2012-01-01

    Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners' literature has not, so far, developed a clear understanding of the factors that distinguish a...

  2. Elucidate Innovation Performance of Technology-driven Mergers and Acquisitions

    Energy Technology Data Exchange (ETDEWEB)

    Huang, L.; Wang, K.; Yu, H.; Shang, L.; Mitkova, L.

    2016-07-01

    The importance and value of Mergers and Acquisitions (M&As) have increased with the expectancy to obtain key technology capabilities and rapid impact on innovation. This article develops an original analytical framework to elucidate the impact of the technology and product relatedness (similarity/complementarity) of the Technology-driven M&A’ partners on post-innovation performance. We present results drawing on a multiple case studies of Chinese High-Tech firms from three industries. (Author)

  3. The role of technological innovation in sustainable economic development

    OpenAIRE

    Andreea Constantinescu; Simona Frone

    2014-01-01

    As in science an accurate picture of present is highlighted from a future outlook, we should recognize the crucial role of new technologies and innovation to improve knowledge in this field. They may give guarantee of sustainable economic development, provided prioritization of research in some fields such as: information technology and communication, resource depletion and climate change. Technological innovation becomes support of all strategies and policies aimed at ensuring sustainable ec...

  4. Innovative developments in uranium separation and concentration technology abroad

    International Nuclear Information System (INIS)

    Liang Jinlong; Zhou Mingsheng; Fang Wei; Sun Yuxiang

    2014-01-01

    Significance of deeply study the innovative developments in Uranium separation and concentration technology abroad was discussed. Development history and innovativeness of eight species of key equipments for separation and concentration were summarized for the first time. Principle and application of seven Uranium separation and concentration technology were analyzed systematically. It is expounded in the paper that high parameter, intelligent and low carbon were three development trends of Uranium separation and concentration technology. (authors)

  5. Climatic shocks associate with innovation in science and technology.

    Science.gov (United States)

    De Dreu, Carsten K W; van Dijk, Mathijs A

    2018-01-01

    Human history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of the rise and fall in rates of discovery and innovation remain poorly understood, they may reflect adaptive responses to exogenously emerging threats and pressures. Here we examined this possibility by fitting annual rates of scientific discovery and technological innovation to climatic variability and its associated economic pressures and resource scarcity. In time-series data from Europe (1500-1900CE), we indeed found that rates of innovation are higher during prolonged periods of cold (versus warm) surface temperature and during the presence (versus absence) of volcanic dust veils. This negative temperature-innovation link was confirmed in annual time-series for France, Germany, and the United Kingdom (1901-1965CE). Combined, across almost 500 years and over 5,000 documented innovations and discoveries, a 0.5°C increase in temperature associates with a sizable 0.30-0.60 standard deviation decrease in innovation. Results were robust to controlling for fluctuations in population size. Furthermore, and consistent with economic theory and micro-level data on group innovation, path analyses revealed that the relation between harsher climatic conditions between 1500-1900CE and more innovation is mediated by climate-induced economic pressures and resource scarcity.

  6. Frozen soil barrier technology. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    The technology of using refrigeration to freeze soils has been employed in large-scale engineering projects for a number of years. This technology bonds soils to give load-bearing strength during construction; to seal tunnels, mine shafts, and other subsurface structures against flooding from groundwater; and to stabilize soils during excavation. Examples of modern applications include several large subway, highway, and water supply tunnels. Ground freezing to form subsurface frozen soil barriers is an innovative technology designed to contain hazardous and radioactive contaminants in soils and groundwater. Frozen soil barriers that provide complete containment (open-quotes Vclose quotesconfiguration) are formed by drilling and installing refrigerant piping (on 8-ft centers) horizontally at approximately 45 degrees angles for sides and vertically for ends and then recirculating an environmentally safe refrigerant solution through the piping to freeze the soil porewater. Freeze plants are used to keep the containment structure at subfreezing temperatures. A full-scale containment structure was demonstrated from May 12 to October 10, 1994, at a nonhazardous site on SEG property on Gallaher Road, Oak Ridge, Tennessee

  7. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    International Nuclear Information System (INIS)

    Brockbank, B.R.

    1995-03-01

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

  8. Innovative technologies for sustainable electrical grids

    International Nuclear Information System (INIS)

    Pagana-Hammer, B.

    2016-01-01

    This year's Energy Day is under the motto "Innovative Technologies for Sustainable Energy Networks". According to the ideas of the European Commission, a sustainable, secure, efficient, affordable and competitive energy supply with particular attention to the limitation of greenhouse gas emissions is to be created. In future, energy should flow freely through Europe without technical barriers in an integrated internal market. For the power supply, this means a renewal and consolidation of the 50-year-old and largely isolated national distribution networks. In addition, the decentralized power plants, which are often remote from the consumers and dependent on the whims of the sun or the wind, are also to be integrated into this network. The fact that electricity can only be saved insufficiently is a further hurdle. In this light, the target of a minimum degree of synchronisation in the European grid of 10% to 2020 and 15% to 2030 seems ambitious. According to the European Commission, the construction of new infrastructure is to be given priority, but there are considerable difficulties with implementation. In addition to the technical barriers, the barriers to the expansion of the energy market and the protracted licensing procedures, the lack of confidence on the part of the citizens question the realization of the plans for a European Supergrid. Today's event attempts to illuminate the large-scale technical possibilities for the exchange of fluctuating renewable energies over long distances as well as the regional grids, which are of interest to the private consumer. The question of the sustainability and expediency of the planned European internal electricity market completes the 2016 Energy Day program. (rössner) [de

  9. 30years of DXA technology innovations.

    Science.gov (United States)

    Glüer, Claus-C

    2017-11-01

    As the successor of Dual Photon Absorptiometry (DPA), Dual X-ray Absorptiometry (DXA) has seen 30years of continuous technological innovations. Implementation of measures for standardization and quality assurance made DXA a reliable and clinically useful approach. Its use in clinical multicenter drug studies in osteoporosis lead to general acceptance as the standard technique of bone densitometry. The limitations of DXA are well established. As a measure of areal bone mineral density (aBMD) it depends on bone size and is biased by overlaying soft tissue and calcified structures. To some extent these errors can be reduced by estimation of bone depth and/or lateral imaging. DXA based aBMD can be supplemented by additional information obtainable from DXA scans: geometric indices such as hip axis length or complex models like 2-D finite element analysis have been developed and tested. Given the drastic improvement in image quality current DXA scans can be used for Vertebral Fracture Analysis (VFA) or grading of Abdominal Aortic Calcifications. A textural measure, Trabecular Bone Score (TBS) provides independent information on fracture risk. DXA devices can also be used for assessments beyond bone density. Periprosthetic aBMD changes can be monitored to study the mechanical fitting of bone implants. Total body composition measurements are increasingly being used in studies on nutrition, obesity, and sarcopenia. 30years after its inception DXA is the undisputed standard imaging technique for the assessment of osteoporotic fracture risk with new applications beyond bone densitometry adding to its value. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Health Instruction Packages: Medical Technologies--EEG, Radiology, & Biomedical Photography.

    Science.gov (United States)

    Brittenham, Dorothea; And Others

    Text, illustrations, and exercises are utilized in this set of four learning modules to instruct medical technology students in a variety of job-related skills. The first module, "EEG Technology: Measurement Technique of the 'International 10-20 System'" by Dorothea Brittenham, describes a procedure used by electroencephalograph…

  11. The differentiated impacts of organizational innovation practices on technological innovation persistence

    OpenAIRE

    Le Bas , Christian; Mothe , Caroline; Nguyen-Thi , Thuc Uyen

    2015-01-01

    International audience; Purpose – The purpose of this paper is to test the major determinants of technological (product and process) innovation persistence and provides evidence of the significant role of organizational innovation. Design/methodology/approach – Data came from two waves of the Luxembourg Community Innovation Survey (CIS): CIS2006 for 2004-2006 and CIS2008 for 2006-2008. The longitudinal data set resulted in a final sample of 287 firms. A multinomial probit model estimates the ...

  12. The power of design product innovation in sustainable energy technologies

    CERN Document Server

    Reinders, Angele H; Brezet, Han

    2012-01-01

    The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

  13. Minimizing the cost of subsea developments through technological innovation

    International Nuclear Information System (INIS)

    Eyre, G.; Loth, B.

    1994-01-01

    The paper summarizes the results of an extensive study carried out for the UK Government. This assessed the cost and economic impact of technological innovation on subsea and floating developments in the UKCS. The study covered, innovations that could be applied to subsea developments to significantly reduce cost, including multiwell completions, composite pipelines, compartmented pipelines, pipeline specification breaking and autonomous control systems. Cost and economic models were used to assess the economic impact of technological innovation on marginal field developments. The results of these assessments were drawn up as a series of ranking lists designed to assist manufacturers and suppliers in establishing priorities for research and development funding. The study also explored the potential UKCS and World market for innovative subsea technologies and quantified the research and development required to bring key innovations into commercial use

  14. Comparing the innovation effects of support schemes for renewable electricity technologies: A function of innovation approach

    International Nuclear Information System (INIS)

    Río, Pablo del; Bleda, Mercedes

    2012-01-01

    The aim of this paper is to provide a comparative assessment of the innovation effects of instruments which support the diffusion of renewable electricity technologies with a functions-oriented technological innovation system perspective. The paper provides a link between two major streams of the literature: the functions of innovation systems and the literature on renewable electricity support schemes. We show that, when a functional perspective is adopted, feed-in tariffs are likely to be superior to other policy instruments (quotas with tradable green certificates and tendering), although they still need to be complemented with other instruments, most importantly, direct R and D support. Furthermore, those innovation effects are affected by the specific design elements of the instruments chosen. - Highlights: ► A comparison of the innovation effects of instruments for the diffusion of renewable technologies. ► A functions-oriented technological innovation system perspective. ► A link between the functions of innovation systems and the literature on renewable electricity support schemes. ► Feed-in tariffs are likely to be superior to other instruments. ► Innovation effects are affected by the specific design elements of instruments.

  15. Problems forming innovative-technological image of russian regions

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2012-06-01

    Full Text Available In this paper, actual problems of innovative-technological image as a key element of the mechanism of the healing sources of socioeconomic development of the Russian regionsare considered. The author gives an assessment of the level of differentiation of subjects of the Russian Federation on the potential for innovative development. Trends in spatial transformations of thescientific and technical and innovation capacities of the country are analyzedand reasons of low innovational activity of Russian enterprises are disclosed. Basic conditions for the success of actions to create an attractive image of innovative-technological territory are formulated. Special attention is paid to the position of regions as participants in the innovational processes, creating preconditions for creativity, harmonization of spatial priorities of innovation, technological and socio-economic development, support for the development of new high-tech industries, improvement of inter-budgetary relations. There are proved priority areas of state policy to reduce barriers to the realization of an innovative paradigm for development of Russian society and effective inclusion of local communities in the implementation of innovative changes.

  16. Biomedical Monitoring by a Novel Noncontact Radio Frequency Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — The area of Space Health and Medicine is one of the NASA's Space Technology Grand Challenges. Space is an extreme environment which is not conducive to human life....

  17. Building a Future for Technological Innovation

    Science.gov (United States)

    2010-08-17

    Higher Education 26% 27% 30% 31% 41% 46% 117% France EU-25 UK Australia Ireland S. Korea Poland 7 6 5 4 3 2 1 3%U.S.15 2010 UN Index rankings jumped...breakthroughs in health IT • Address scientific “grand challenges” Promote Competitive Markets that Spur Productive Entrepreneurship • Promote... entrepreneurship • Improve public sector innovation and support community innovation Source: http://www.whitehouse.gov/administration/eop/nec/reports

  18. Biomaterials innovation bundling technologies and life

    CERN Document Server

    Styhre, A

    2014-01-01

    Rapid advances in the life sciences means that there is now a far more detailed understanding of biological systems on the cellular, molecular and genetic levels. Sited at the intersection between the life sciences, the engineering sciences and the design sciences, innovations in the biomaterials industry are expected to garner increasing attention and play a key role in future development. This book examines the biomaterials innovations taking place in corporations and in academic research settings today.

  19. Innovation in surgical technology and techniques: Challenges and ethical issues.

    Science.gov (United States)

    Geiger, James D; Hirschl, Ronald B

    2015-06-01

    The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. ReRouting biomedical innovation: observations from a mapping of the alternative research and development (R&D) landscape.

    Science.gov (United States)

    Greenberg, Alexandra; Kiddell-Monroe, Rachel

    2016-09-14

    In recent years, the world has witnessed the tragic outcomes of multiple global health crises. From Ebola to high prices to antibiotic resistance, these events highlight the fundamental constraints of the current biomedical research and development (R&D) system in responding to patient needs globally.To mitigate this lack of responsiveness, over 100 self-identified "alternative" R&D initiatives, have emerged in the past 15 years. To begin to make sense of this panoply of initiatives working to overcome the constraints of the current system, UAEM began an extensive, though not comprehensive, mapping of the alternative biomedical R&D landscape. We developed a two phase approach: (1) an investigation, via the RE:Route Mapping, of both existing and proposed initiatives that claim to offer an alternative approach to R&D, and (2) evaluation of those initiatives to determine which are in fact achieving increased access to and innovation in medicines. Through phase 1, the RE:Route Mapping, we examined 81 initiatives that claim to redress the inequity perpetuated by the current system via one of five commonly recognized mechanisms necessary for truly alternative R&D.Preliminary analysis of phase 1 provides the following conclusions: 1. No initiative presents a completely alternative model of biomedical R&D. 2. The majority of initiatives focus on developing incentives for drug discovery. 3. The majority of initiatives focus on rare diseases or diseases of the poor and marginalized. 4. There is an increasing emphasis on the use of push, pull, pool, collaboration and open mechanisms alongside the concept of delinkage in alternative R&D. 5. There is a trend towards public funding and launching of initiatives by the Global South. Given the RE:Route Mapping's inevitable limitations and the assumptions made in its methodology, it is not intended to be the final word on a constantly evolving and complex field; however, its findings are significant. The Mapping's value lies in its

  1. Understanding University Faculty Perceptions about Innovation in Teaching and Technology

    Science.gov (United States)

    Kopcha, Theodore J.; Rieber, Lloyd P.; Walker, Brandy B.

    2016-01-01

    The purpose of this research is to understand faculty perceptions about innovation in teaching and technology in a college of education in a research-intensive university. This study was motivated by the creation of a new initiative begun in a large college of education at a Carnegie Research-Intensive university to promote innovation in teaching…

  2. Concept relation discovery and innovation enabling technology (CORDIET)

    NARCIS (Netherlands)

    Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

    2011-01-01

    Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

  3. Optical coherence tomography: technology and applications (biological and medical physics, biomedical engineering)

    CERN Document Server

    2013-01-01

    Optical coherence tomography (OCT) is the optical analog of ultrasound imaging and is emerging as a powerful imaging technique that enables non-invasive, in vivo, high resolution, cross-sectional imaging in biological tissue. This book introduces OCT technology and applications not only from an optical and technological viewpoint, but also from biomedical and clinical perspectives. The chapters are written by leading research groups, in a style comprehensible to a broad audience.

  4. The Process of Accepting Technology Innovation for Rural Teachers

    Science.gov (United States)

    Cerovski, Jeremy

    2016-01-01

    In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

  5. Applying Nano technology to Human Health: Revolution in Biomedical Sciences

    International Nuclear Information System (INIS)

    Shrivastava, S.; Dash, D.

    2009-01-01

    Recent research on bio systems at the nano scale has created one of the most dynamic science and technology domains at the confluence of physical sciences, molecular engineering, biology, biotechnology, and medicine. This domain includes better understanding of living and thinking systems, revolutionary biotechnology processes, synthesis of new drugs and their targeted delivery, regenerative medicine, necrophorum engineering, and developing a sustainable environment. Nano bio systems research is a priority in many countries and its relevance within nano technology is expected to increase in the future. The realisation that the nano scale has certain properties needed to solve important medical challenges and cater to unmet medical needs is driving nano medical research. The present review explores the significance of nano science and latest nano technologies for human health. Addressing the associated opportunities, the review also suggests how to manage far-reaching developments in these areas

  6. Cooperative technological innovation and competitiveness in the nuclear arena

    International Nuclear Information System (INIS)

    Castro Galvan, A.; Marco Pelegrin, M.; Salve Galiana, R.; Vallejo Haya, J.; Tagle Gonzalez, J. A.

    2000-01-01

    R and D and, more recently, technological innovation and its relationship with competitivity are more and more part of conferences, books, articles and political speeches and very often are the central part of them. Innovation has become fashionable and many initiatives have come out in connection with it. However, the relationship between technological innovation and competitivity are not always obvious. The current article intends to illustrate some mechanisms that link these two concepts through a specific case, DTN, that is already providing results for the Spanish nuclear industry and whose example can be extrapolated to other industrial sectors. The importance given by the nuclear to the innovation, the research and the technological development it is not new either exclusively belong to any specific organisation but makes evident the coherence between its traditional approach and the current idea of modernizing the country promoting the national technological capacity. (Author)

  7. Technology Innovation at the National Renewable Energy Laboratory (Text

    Science.gov (United States)

    the Technology Innovation at NREL video. [intro music] The video opens with a blue background and the scientific discoveries that are coming out of the lab and transfer them to industry to get products on the screen. [exit music

  8. Science, Technology, and Innovation in Chile | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Book cover Science, Technology, and Innovation in Chile ... With this in mind, and following a conversation between Canadian Prime Minister Jean Chrétien and ... Call for new OWSD Fellowships for Early Career Women Scientists now open.

  9. Technological Innovation: Concept, Process, Typology and Implications in the Economy

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2011-10-01

    Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

  10. Innovation Implementation: The Role of Technology Diffusion Agencies

    Directory of Open Access Journals (Sweden)

    Jasmin Robertson

    2008-08-01

    Full Text Available A great deal of ‘innovation failure’ can be attributed to ineffective implementation, rather than failure of the innovation itself. External agencies such as technology diffusion agencies (TDAs have been created to assist organisations to implement innovation successfully, but there has been little empirical research investigating their roles. This paper presents a longitudinal case study of failed innovation implementation, and highlights in particular the role that technology diffusion agencies can play to prevent such failure in future cases. Results indicate the importance of changes in organisational factors such as training, climate, and management support during the implementation process in predicting outcomes, and imply a role for TDAs in assisting with both technical and non-technical aspects of innovation implementation.

  11. Innovation in Australian technology 1979-1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Innovations arising from Australian research and development are reported. Two categories of submission are defined: those which are in production or use and those which have reached prototype design or pilot plant stage and appear to be of value. Innovations in the field of nuclear science are: a radon analyser, uranium tails management, technetium-99m generator, enrichment of uranium by gas ultracentrifuge, programmable radiometric assay monitor, a borehole core analyser, intrinsic germanium detector for uranium borehole logging, underground operations at a uranium mine, neutron moisture meter and apparatus for the determination of deuterium in water at natural levels. Names to whom requests for further information should be addressed are included.

  12. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  13. Innovation Environment in Small Technology-Based Companies

    Directory of Open Access Journals (Sweden)

    Gabriela Gonçalves Silveira Fiates

    2010-11-01

    Full Text Available Innovation has been identified as a strategy to achieve competitive advantage, particularly in contexts of change and especially for technology-based companies – TBCs. Although the adoption of innovation strategies is not easy, small companies have an organizational environment more conducive to innovation. This article examines how managers and employees of small TBCs perceive aspects of the internal environment of innovation in the organization (culture, organizational structure, personnel and infrastructure and their suitability for the innovation process. This is a qualitative research from a multicase study on five companies located in an incubator. Data were collected through open interviews, using a semi-structured script, with one of the managers and two employees from each company. Data were analyzed from preliminary content analysis. The results showed some discrepancies between the perceptions of managers and employees about the issues investigated and their suitability for the innovation system, as well as between reality and the theoretical basis used.

  14. Barriers and Facilitators of Collaborative Management in Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Sonia Regina Hierro Parolin

    2013-05-01

    Full Text Available Discussions about innovation tend to a more systemic and cooperative approach in which those networks focused on scientific and technological development are considered. This article aims to identify the barriers and facilitators in the collaborative management process of technological innovation projects and a study has been carried out by the cooperation action for innovation with 17 industries in Brazil. The primary evidence refers to the crucial role of project managers when leading the structural demands, and clarity on the relevance of the communication of strategic guidelines among the organizations involved for the achievement of the results in the industries.

  15. Small Business Innovation Research and Small Business Technology Transfer Programs

    Science.gov (United States)

    Garrison, Lynn; Jasper, Gwen

    2015-01-01

    The Small Business Innovation Research (SBIR)/Small Business Technology Transfer (STTR) programs fund the research, development, and demonstration of innovative technologies that fulfill NASA's needs as described in the annual Solicitations and have significant potential for successful commercialization. The only eligible participants are small business concern (SBC) with 500 or fewer employees or a nonprofit research institute such as a university or a research laboratory with ties to an SBC. These programs are potential sources of seed funding for the development of small business innovations.

  16. Hybrid laser technology for creation of doped biomedical layers

    Czech Academy of Sciences Publication Activity Database

    Jelínek, Miroslav; Bačáková, Lucie; Remsa, Jan; Kocourek, Tomáš; Mikšovský, Jan; Písařík, Petr; Vandrovcová, Marta; Filová, Elena; Kubinová, Šárka

    2016-01-01

    Roč. 4, Jan (2016), s. 98-104 ISSN 2327-6045 R&D Projects: GA ČR(CZ) GA15-05864S; GA ČR(CZ) GA15-01558S Institutional support: RVO:68378271 ; RVO:67985823 ; RVO:68378041 Keywords : hybrid laser technology * biomaterials * thin Films * doped Layers * DLC Subject RIV: BM - Solid Matter Physics ; Magnetism; JJ - Other Materials (FGU-C)

  17. Biomedical sensor for transcutaneous oxygen measurements using thick film technology

    OpenAIRE

    Lam, Yu-Zhi (Liza)

    2003-01-01

    The measurement of the partial pressure of oxygen in arterial blood is essential for the analysis of a patient's respiratory condition. There are several commercially available methods and systems to measure this parameter transcutaneously. However, they tend to be cumbersome and costly. To overcome the disadvantages presented, a new type of sensor for transcutaneous blood gas measurement was investigated, employing thick film technology, which is an excellent technique to produce sensors in ...

  18. Identifying technology innovations for marginalized smallholders-A conceptual approach.

    Science.gov (United States)

    Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

    2017-05-01

    This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

  19. Competitive intelligence information management and innovation in small technology-based companies

    Science.gov (United States)

    Tanev, Stoyan

    2007-05-01

    In this article we examine how (i) company type and (ii) the competitive intelligence information used by small technology-based companies affect their innovation performance. The focus is on the specific information types used and not on the information sources. Information topics are classified in four groups - customers (10), company (9), competitor (11) and industry (12). The sample consists of 45 small new technology-based companies, specialized suppliers, and service companies from a variety of sectors - software, photonics, telecommunications, biomedical engineering and biotech, traditional manufacturing etc. The results suggest that the total number of intelligence information topics companies use to make decisions about innovation is not associated with the number of their new products, processes, services and patents. Therefore the companies in our sample do not seem to have the resources, processes or value systems required to use different competitive intelligence information when making decisions on innovation or may rely more on their own internal logic than on external information. Companies are classified using a Pavitt-like taxonomy. Service companies are considered as a separate company type. This allows for explicitly studying both, the innovative role of new services in product driven companies, and the role of new product development in service companies.

  20. Innovations in and by nuclear technology - review and perspectives

    International Nuclear Information System (INIS)

    Barthelt, K.

    1984-01-01

    An innovative technology like nuclear technology does not make progress by itself once it has to prove its profitability. It was a long way from technical to economic perfection which took courageous managemental descisions. Since nuclear fission was discovered, its exploitation as an energy source has been perfected. Now it is not only technically safe, reliable and ecological; it has also proved to be economically efficient as compared with the competing primary energies. As with other great innovations, the innovative force of nuclear technology is characterized by two directions: its assimilating capacity and its expanding capacity. Further issues are the so-called technological spin-off of nuclear technology and the fresh impetus nuclear technology gives to other fields. Another aspect beyond technological spin-off affecting all of our society: It was the first large technology requiring risk analyses to be carried out. Discussion broke out in public on the question: ''How safe is nuclear technology''. To sum up, the basic innovation of nuclear technology is now an important economic factor. It came just in time. It is capable of providing relief to the world's energy problems. It is up to us to use it in an intelligent way in the future despite any short-breathed complaints. (orig./HSCH) [de

  1. Mastering Technologies in Design-Driven Innovation

    DEFF Research Database (Denmark)

    Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

    2010-01-01

    Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional and sem...

  2. Stochastic diffusion models for substitutable technological innovations

    NARCIS (Netherlands)

    Wang, L.; Hu, B.; Yu, X.

    2004-01-01

    Based on the analysis of firms' stochastic adoption behaviour, this paper first points out the necessity to build more practical stochastic models. And then, stochastic evolutionary models are built for substitutable innovation diffusion system. Finally, through the computer simulation of the

  3. Imagining value, imagining users: academic technology transfer for health innovation.

    Science.gov (United States)

    Miller, Fiona Alice; Sanders, Carrie B; Lehoux, Pascale

    2009-04-01

    Governments have invested heavily in the clinical and economic promise of health innovation and express increasing concern with the efficacy and efficiency of the health innovation system. In considering strategies for 'better' health innovation, policy makers and researchers have taken a particular interest in the work of universities and related public research organizations: How do these organizations identify and transfer promising innovations to market, and do these efforts make best use of public sector investments? We conducted an ethnographic study of technology transfer offices (TTOs) in Ontario and British Columbia, Canada, to consider the place of health and health system imperatives in judgments of value in early-stage health innovation. Our analysis suggests that the valuation process is poorly specified as a set of task-specific judgments. Instead, we argue that technology transfer professionals are active participants in the construction of the innovation and assign value by 'imagining' the end product in its 'context of use'. Oriented as they are to the commercialization of health technology, TTOs understand users primarily as market players. The immediate users of TTOs' efforts are commercial partners (i.e., licensees, investors) who are capable of translating current discoveries into future commodities. The ultimate end users - patients, clinicians, health systems - are the future consumers of the products to be sold. Attention to these proximate and more distal users in the valuation process is a complex and constitutive feature of the work of health technology transfer. At the same time, judgements about individual technologies are made in relation to a broader imperative through which TTOs seek to imagine and construct sustainable innovation systems. Judgments of value are rendered sensible in relation to the logic of valuation for systems of innovation that, in turn, configure users of health innovation in systemic ways.

  4. Accelerating nano-technological innovation in the Danish construction industry

    DEFF Research Database (Denmark)

    Koch, Christian; Stissing Jensen, Jens

    2007-01-01

    . The institutional features of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support "incubation rooms" or marked......  By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which...... concludes that opportunities are generally poorly appreciated by the industry and research communities alike. It is found that the construction industry is characterised by low-tech trajectories where dedicated innovation networks are often too fragile for innovations to stabilize and diffuse...

  5. How innovation commons contribute to discovering and developing new technologies

    Directory of Open Access Journals (Sweden)

    Darcy W.E. Allen

    2016-09-01

    Full Text Available In modern economics, the institutions surrounding the creation and development of new technologies are firms, markets and governments. We propose an alternative theory that locates the institutional origin of new technologies further back in the commons when self-organizing groups of technology enthusiasts develop effective governance rules to pool distributed information resources. The ‘innovation commons’ alleviates uncertainty around a nascent technology by pooling distributed information about uses, costs, problems and opportunities. While innovation commons are mostly temporary, because the resource itself – the information about opportunities – is only temporarily valuable, they are a further addition to the Pantheon of commons, and suggest that the institutions of the commons – and the common pool resource of information about applications of the technology – may be far more important in the study of innovation than previously thought.

  6. Bringing to Market Technological Innovation: What Distinguishes Success from Failure

    Directory of Open Access Journals (Sweden)

    Federico Frattini

    2012-09-01

    Full Text Available Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners’ literature has not, so far, developed a clear understanding of the factors that distinguish an effective commercialization from an unsuccessful one, especially in high-technology environments. This paper discusses the results of a research project that aimed to understand the ingredients for success in the commercialization of a technological innovation. The first stage of the research consisted of a comparative historical analysis of 18 innovations, which were commercialized in consumer high-tech markets in the last 30 years. The analysis advocates that an effective commercialization comprises three sub-strategies: Early adoption strategy, Adoption network configuration strategy and Mainstream adoption strategy, with each one characterized by a coherent set of commercialization dimensions. The relative importance of each sub-strategy in determining the innovation commercial success depends on the type of innovation that is commercialized, be it radical or incremental and discontinuous or continuous.

  7. INNOVATIVE TECHNOLOGIES OF LOGISTICAL SUPPORT OF TROOPS

    Directory of Open Access Journals (Sweden)

    S. V. Myamlin

    2017-12-01

    Full Text Available Purpose. Comprehensive and uninterrupted logistical support of troops is considered one of the main factors of successful conduct of hostilities by any state. The logistics support system, created in peacetime, is intended for use in the course of a military company. It is the link between the front and the economy of the country, and at the same time, it is one of the important factors affecting the combat operation. According to experts, changes in the geopolitical and military-strategic situation in Europe resulted also changes in the armed forces of states, including their logistical support, which is undergoing changes and is developing under the direct influence of the military strategy, the achievement of whose goals it is intended to provide. All this necessitates the search for new, more effective ways of solving logistical problems in modern combat. This is true today, including for the Armed Forces of Ukraine. Therefore, the purpose of the work is to consider and implement in practice the logistic support of the state power structures of innovations in the form of a new, improved product - the creation of modular complexes, including various block containers (kitchen-dining room, shower room, laundry, post-office, dispensary and others. They will dramatically change in the future the quality of resolving the issues of everyday life of servicemen during the performance of combat missions in emergency zones and with participation in armed conflicts. Methodology. The methodology is based on the main measures to improve the logistic support system in the near future, including the reorganization of the existing logistic support system and the creation of modular structures of forces and means that are easily adapted and subsequently targeted for specific tasks. Findings. A set of design documentation for the block - container for laundry and shower in the field is offered. Technological modules for combat (block-post, rear (kitchen

  8. Constructive philosophy of technology and responsible innovation

    NARCIS (Netherlands)

    Brey, Philip A.E.; Franssen, M.; Vermaas, P.E.; Kroes, P.; Meijers, A.W.M.

    2016-01-01

    This essay argues for a new turn after the empirical turn in the philosophy of technology: the societal turn, which is the turn from reflective philosophy of technology (academic philosophy concerned with analysis and understanding) to constructive philosophy of technology (philosophy that is

  9. Technological Innovation Management and its Role in Performance of Organizations

    Directory of Open Access Journals (Sweden)

    Laura-Diana Radu

    2012-10-01

    Full Text Available This paper aims to identify the main benefits of technological innovation in organizations and how it should be managed to ensure economic efficiency. The current level of social and economic evolution was possible only through active involvement of individuals and organizations in the innovative process. Adoption of appropriate policies and strategies at institutional, national and international level has significant impact on both the innovation process and innovation results. At company level, involvement in an innovative process depends on the financial and human resources and on the availability and interest of management and employees. The main motivating factor in adoption of technological innovation is, most often, obtaining financial benefits. This reflects itself either as a direct increase in profits, or by obtaining competitive advantage which leads, in the long run, to profits increase and achieving a favorable position on the market. Should not be neglected other motivating factors of innovation, such as compliance with environmental standards, ensuring a secure position on the market with opportunities for further expansion, reducing the cost of raw materials and / or production process, improving company image, attitude and achievements of partners in the field (competitors, suppliers, customers etc. Managers need to carefully analyze these factors and decide the manner and degree of involvement in an innovative process.

  10. A Conceptual Framework for the Alignment of Innovation and Technology

    Directory of Open Access Journals (Sweden)

    René Pellissier

    2008-08-01

    Full Text Available Historically, business institutions base their growth strategies on their research and development (R&D function. This function is fairly established and sets out to acquire new knowledge in a systematic process of research in order to produce or improve products, services or processes. In fact, innovation and research are two of the main thrusts for economic growth. Research is planned, assessed, managed and rewarded, innovation is not. However, without acknowledging and aiding the growing importance of innovation for growth in a rapidly more chaotic environment, this function is set for failure. Where research is valued, innovation is feared as radical and disruptive. Furthermore, there is little evidence in the current body literature to link them and to show how they, jointly, can add more value than separately. They remain independent entities in separate clusters of the economy. The convergence factor in research and innovation is technology (knowledge not machines. The paper explores the convergence of innovation and research from a previous paper, focusing on the development of a conceptual model in terms of the technology (or knowledge system required for the accomplishment of this convergence. In this sense, technology is defined as knowledge, tacit or explicit, in human, document or electronic format. The proposed convergence requires the use of knowledge systems to drive the innovation and research. The contribution of the paper lies in the knowledge developmental aspects of research and innovation convergence. An existing model to achieve for knowledge systems development will be reviewed and a modified version presented after careful consideration of the body literature on knowledge and innovation systems. This model incorporates aspects of knowledge management as well as innovation and research management.

  11. A dedicated fund supports technological innovation

    CERN Document Server

    Katarina Anthony

    2010-01-01

    The Knowledge and Technology Transfer (KTT) Group is calling on CERN Departments to take their technology out of the confines of the laboratory and make it ready for dissemination. For the first time, projects can apply for financial support from the newly established KTT Fund.   Scientific inquiry can lead to unexpected developments for society when researchers apply their expertise for public use. CERN actively encourages this transfer of knowledge and technology and, for the first time, has created a dedicated fund to provide financial support to projects aiming at disseminating their technologies to external audiences. CERN’s technology transfer schemes were formalised in the recent Policy on the Management of Intellectual Property in Technology Transfer, approved in March. Revenues generated by commercial exploitation will be distributed between the members of the team that developed the technology, their Department, and the KTT Fund for reinvestment in further KTT projects. &qu...

  12. Innovative technology for optical and infrared astronomy

    Science.gov (United States)

    Cunningham, Colin R.; Evans, Christopher J.; Molster, Frank; Kendrew, Sarah; Kenworthy, Matthew A.; Snik, Frans

    2012-09-01

    Advances in astronomy are often enabled by adoption of new technology. In some instances this is where the technology has been invented specifically for astronomy, but more usually it is adopted from another scientific or industrial area of application. The adoption of new technology typically occurs via one of two processes. The more usual is incremental progress by a series of small improvements, but occasionally this process is disruptive, where a new technology completely replaces an older one. One of the activities of the OPTICON Key Technology Network over the past few years has been a technology forecasting exercise. Here we report on a recent event which focused on the more radical, potentially disruptive technologies for ground-based, optical and infrared astronomy.

  13. A venture capital view of challenges, opportunities, and innovation in biomedical research.

    Science.gov (United States)

    Ratcliffe, L T

    2011-02-01

    Small biotech companies have been an important source of innovation, pipelines, and new products for the pharmaceutical industry, and are primarily financed by venture capital (VC). The significant changes happening within the VC industry have broad implications for these small companies. This includes a shift to financing later-stage programs with increasing interest in orphan or specialty indications. Nontraditional sources of capital and innovative risk-sharing structures can enable early-stage companies.

  14. Redefining responsible research and innovation for the advancement of biobanking and biomedical research.

    Science.gov (United States)

    Yu, Helen

    2016-12-01

    One of the core objectives of responsible research and innovation (RRI) is to maximize the value of publicly funded research so that it may be returned to benefit society. However, while RRI encourages innovation through societal engagement, it can give rise to complex and previously untested issues that challenge the existing legal frameworks on intellectual property (IP) and public entitlement to benefits of research. In the case of biobanking, the personal nature of human biological materials and often altruistic intention of participants to donate samples intensifies the need to adhere to RRI principles with respect to the research, development, and commercialization of innovations derived from biobanks. However, stakeholders participate and collaborate with others in the innovation process to fulfill their own agenda. Without IP to safeguard investments in R&D, stakeholders may hesitate to contribute to the translation of discoveries into innovations. To realize the public benefit objective, RRI principles must protect the interests of stakeholders involved in the translation and commercialization of knowledge. This article explores the seemingly contradictory and competing objectives of open science and commercialization and proposes a holistic innovation framework directed at improving RRI practice for positive impact on obtaining the optimal social and economic values from research.

  15. Biomimicry and the Materiality of Ecological Technology and Innovation

    NARCIS (Netherlands)

    Blok, V.

    2016-01-01

    In this paper, we reflect on the concept of nature that is presupposed in biomimetic approaches to technology and innovation. Because current practices of biomimicry presuppose a technological model of nature, it is questionable whether its claim of being a more ecosystem friendly approach to

  16. Adoption of innovative production technologies in the road construction industry

    NARCIS (Netherlands)

    Habets, M.J.M.; van der Sijde, Peter; Voordijk, Johannes T.

    2007-01-01

    New procurement methods encourage the adoption of innovative production technologies. This triggers the need for entrepreneurship in the construction industry. The purpose of this study is to provide insights into the adoption processes of a particular set of new production technologies in the Dutch

  17. ResonantSonic drilling. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    The technology of ResonantSonic drilling is described. This technique has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology uses no drilling fluids, is safe and can be used to drill slant holes

  18. Disruptive Innovation in Air Measurement Technology: Reality or Hype?

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innov...

  19. Science and Technology Innovation for the Base of the Pyramid ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Indeed, some technological advances appear to have exacerbated the gap between them. The question is, how can science and technology (S&T) innovation be brought to bear on the needs of the poor? This project will endeavor to address the development needs of the poor and excluded in six Southeast Asian countries ...

  20. The Roles of Research Universities in Indigenous National Technological Innovation

    Science.gov (United States)

    Feng, Zhuolin; Zhao, Wenhua

    2008-01-01

    The world is increasingly merged into a global market economy, and the government's intervention power in economy has rapidly given way to that of science and technology. For the world's major economic powers, indigenous technological innovation has become a national strategy for enhancing competitiveness. Investment in scientific and…

  1. Innovative technologies for recycling contaminated concrete and scrap metal

    International Nuclear Information System (INIS)

    Bossart, S.J.; Moore, J.

    1993-01-01

    Decontamination and decommissioning of US DOE's surplus facilities will generate enormous quantities of concrete and scrap metal. A solicitation was issued, seeking innovative technologies for recycling and reusing these materials. Eight proposals were selected for award. If successfully developed, these technologies will enable DOE to clean its facilities by 2019

  2. Linking unlearning with innovation through organizational memory and technology

    OpenAIRE

    Jiménez Jiménez, Daniel; Cepeda Carrión, Gabriel; Cegarra Navarro, Juan Gabriel

    2010-01-01

    While the information technologies provide organizational members with explicit concepts, such as writing instruction manuals, the ‘organizational memory’ provides individuals with tacit knowledge, such as systematic sets, routines and shared visions. This means that individuals within an organization learn by using both the organizational memory and the information technologies. They interact to reduce organizational information needs contributing to improve organizational innovativeness....

  3. Review of early assessment models of innovative medical technologies

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

    2017-01-01

    INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...

  4. Handbook of Research on Innovative Technology Integration in Higher Education

    Science.gov (United States)

    Nafukho, Fredrick Muyia, Ed.; Irby, Beverly J., Ed.

    2015-01-01

    Our increasingly globalized world is driven by shared knowledge, and nowhere is that knowledge more important than in education. Now more than ever, there is a demand for technology that will assist in the spread of knowledge through customized, self-paced, and on-demand learning. The Handbook of Research on Innovative Technology Integration in…

  5. Organisational Culture and Technology-Enhanced Innovation in Higher Education

    Science.gov (United States)

    Zhu, Chang

    2015-01-01

    Higher education institutions are evolving and technology often plays a central role in their transformations. Educational changes benefit from a supportive environment. The study examines the relationship between organisational culture and teachers' perceptions of and responses to technology-enhanced innovation among Chinese universities. A…

  6. Four Essays on Technology Licensing and Firm Innovation

    DEFF Research Database (Denmark)

    Moreira, Solon

    &D strategies. On the supply side, the existing literature has been focused on understanding how technology licensing can be used by firms as a mechanism to recover investments in innovative activities and to foster learning opportunities. On the demand side, it has been shown that licensing is an important...... source that firms can tap into to feed their internal needs for innovative knowledge. While several studies have examined technology licensing through the lens of the licensor, research on how firms rely on licensing contracts to acquire knowledge and improve their innovation performance still leaves......Licensing contracts represent one of the most widely used mechanisms to exchange technologies and transfer know-how between firms. Due to the opportunities that licensing creates for firms operating on both sides of the markets for technology, it has increasingly become an integral part of firms’ R...

  7. Utilizing technological innovations to enhance psychotherapy supervision, training, and outcomes.

    Science.gov (United States)

    Barnett, Jeffrey E

    2011-06-01

    Recent technological advances in the use of the Internet and video technologies has greatly impacted the provision of psychotherapy and other clinical services as well as how the training of psychotherapists may be conducted. When utilized appropriately these technologies may provide greater access to needed services to include treatment, consultation, supervision, and training. Specific ethical challenges and pitfalls are discussed and recommendations are made for the ethical use of these technologies. Additionally, innovative practices from the seven articles in the special section that follows are highlighted and reviewed. These articles present a number of innovations that can take psychotherapy training, research, supervision, and treatment forward toward increased effectiveness. Recommendations for integrating these innovations into ongoing practices are provided and for additional research to build on the important work of the authors in this special section are provided.

  8. KNOWLEDGE, TECHNOLOGY ADOPTION AND FINANCIAL INNOVATION

    OpenAIRE

    Ana Fernandes

    2004-01-01

    Why are new financial instruments created? This paper proposes the view that financial development arises as a response to the contractual needs of emerging technologies. Exogenous technological progress generates a demand for new financial instruments in order to share risk or overcome private information, for example. A model of the dynamics of technology adoption and the evolution of financial instruments that support such adoption is presented. Early adoption may be required for financial...

  9. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  10. Engineering innovation in healthcare: technology, ethics and persons.

    Science.gov (United States)

    Bowen, W Richard

    2011-01-01

    Engineering makes profound contributions to our health. Many of these contributions benefit whole populations, such as clean water and sewage treatment, buildings, dependable sources of energy, efficient harvesting and storage of food, and pharmaceutical manufacture. Thus, ethical assessment of these and other engineering activities has often emphasized benefits to communities. This is in contrast to medical ethics, which has tended to emphasize the individual patient affected by a doctor's actions. However technological innovation is leading to an entanglement of the activities, and hence ethical responsibilities, of healthcare professionals and engineering professionals. The article outlines three categories of innovation: assistive technologies, telehealthcare and quasi-autonomous systems. Approaches to engineering ethics are described and applied to these innovations. Such innovations raise a number of ethical opportunities and challenges, especially as the complexity of the technology increases. In particular the design and operation of the technologies require engineers to seek closer involvement with the persons benefiting from their work. Future innovation will require engineers to have a good knowledge of human biology and psychology. More particularly, healthcare engineers will need to prioritize each person's wellbeing, agency, human relationships and ecological self rather than technology, in the same way that doctors prioritize the treatment of persons rather than their diseases.

  11. Determinants of the pace of global innovation in energy technologies.

    Science.gov (United States)

    Bettencourt, Luís M A; Trancik, Jessika E; Kaur, Jasleen

    2013-01-01

    Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970-2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time.

  12. Determinants of the Pace of Global Innovation in Energy Technologies

    Science.gov (United States)

    Kaur, Jasleen

    2013-01-01

    Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970–2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time. PMID:24155867

  13. Innovative Canadian Process Technology For Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Johar, Sangat; Norton, Kevin

    2010-09-15

    The need for increasing renewable and alternative energy in the global energy mix has been well recognized by Governments and major scientific forums to reduce climate change impact for this living planet. Biodiesel has very high potential for GHG emission reduction. An innovative process developed in Canada provides solution to mitigate the feedstock, yield and quality issues impacting the industry. The Biox process uses a continuous process which reduces reaction times, provides > 99% yield of high quality biodiesel product. The process is feedstock flexible and can use cheaper higher FFA feedstock providing a sustainable approach for biodiesel production.

  14. Technological innovation: a structrational process view

    NARCIS (Netherlands)

    Fehse, K.I.A.; Wognum, P.M.

    1999-01-01

    The central aim of our research is to describe and explain how the introduction of a computer-based technology, which supports co-operative work in engineering departments, induces change processes. The employment of computer-based technologies in product development organisations to support

  15. Science, Technology, and Innovation in Chile

    International Development Research Centre (IDRC) Digital Library (Canada)

    Technology for small- and medium-scale enterprises .... The system encompasses some interactions that are cooperative, others which are competitive. ..... nature of some key, contemporary technologies, and the synergy and even fusion of .... such as the integration of science policies with economic and social policies, and ...

  16. Science, Technology, and Innovation in Chile | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Science, Technology, and Innovation in Chile présente les résultats de cette étude. Les lecteurs y trouveront une analyse détaillée des politiques sur les sciences et la technologie du Chili qui part du « système d'innovation national ». On y propose des moyens d'améliorer la coordination du secteur public, des réformes ...

  17. Between tradition and technological innovation: challenges to lime Heritage conservation

    Directory of Open Access Journals (Sweden)

    Marluci Menezes

    2016-01-01

    Full Text Available The aim is to discuss the relationship between traditional and scientific technological knowledge as innovative and fundamental to heritage conservation. It is argued that this innovation does not necessarily come from scientific knowledge, but potentially from a wise articulation between these two types of knowledge. This discussion starts from an already long process of reflection on lime heritage conservation, as developed in LNEC from research projects.

  18. DOE's Innovative Treatment Remediation Demonstration Program accelerating the implementation of innovative technologies

    International Nuclear Information System (INIS)

    Hightower, M.

    1995-01-01

    A program to help accelerate the adoption and implementation of new and innovative remediation technologies has been initiated by the Department of Energy's (DOE) Environmental Restoration Program Office (EM40). Developed as a Public-Private Partnership program in cooperation with the US Environmental Protection Agency's (EPA) Technology Innovation Office (TIO) and coordinated by Sandia National Laboratories, the Innovative Treatment Remediation Demonstration (ITRD) Program attempts to reduce many of the classic barriers to the use of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. In this program, DOE facilities work cooperatively with EPA, industry, national laboratories, and state and federal regulatory agencies to establish remediation demonstrations using applicable innovative technologies at their sites. Selected innovative technologies are used to remediate small, one to two acre, sites to generate the full-scale and real-world operating, treatment performance, and cost data needed to validate these technologies and gain acceptance by industry and regulatory agencies, thus accelerating their use nationwide. Each ITRD project developed at a DOE site is designed to address a typical soil or groundwater contamination issue facing both DOE and industry. This includes sites with volatile organic compound (VOC), semi-VOC, heavy metal, explosive residue, and complex or multiple constituent contamination. Projects are presently underway at three DOE facilities, while additional projects are under consideration for initiation in FY96 at several additional DOE sites. A brief overview of the ITRD Program, program plans, and the status and progress of existing ITRD projects are reviewed in this paper

  19. Technology Innovation of Power Transmission Gearing in Aviation

    Science.gov (United States)

    Handschuh, Robert F.

    2009-01-01

    An overview of rotary wing evolution and innovations over the last 20 years was presented. This overview is provided from a drive system perspective. Examples of technology innovations that have changed and advanced drive systems of rotary wing vehicles will be provided. These innovations include full 6-axis CNC gear manufacture, face gear development to aerospace standards, health and usage monitoring, and gear geometry and bearing improvements. Also, an overview of current state-of-the-art activities being conducted at NASA Glenn is presented with a short look to fixed and rotary wing aircraft and systems needed for the future.

  20. Investigating the Influence of Technology Inflows on Technology Outflows in Open Innovation Processes : A Longitudinal Analysis

    NARCIS (Netherlands)

    Sikimic, U.; Chiesa, V.; Frattini, F.; Scalera, V.G.

    2016-01-01

    The open innovation (OI) paradigm emphasizes the importance of integrating inbound and outbound flows of technology to increase a firm's innovation performance. While the synergies between technology inflows and outflows have been discussed in conceptual OI articles, the majority of empirical

  1. Effects of RFID Technology on the Logistics Innovation

    OpenAIRE

    金, 双鴿; Shuangge, JIN

    2010-01-01

    An advanced automatic identification technology based on the Radio Frequency Identification (RFID) technology has significant value for inventory systems. RFID tag is a microchip combined with an antenna in a compact package and is called also IC tag. Other benefits of using RFID include the reduction of labor costs, the simplification of business processes, and the reduction of inventory inaccuracies. This paper aims to analyse the effects of RFID technology on the logistics innovation.

  2. Quality and Innovation with Blockchain Technology

    OpenAIRE

    Benton, Morgan C.; Radziwill, Nicole M.

    2017-01-01

    In recent years, hype surrounding the proliferation of blockchain-based technology has been significant. Apart from the creation of bitcoin and other cryptocurrencies, it has been difficult to determine what practical utility might lie in the adoption of blockchain, mainly because there are so few in existence at present. Even so, interest in the technology has increased tremendously. This paper is a primer for software quality professionals. It briefly describes the history of blockchain tec...

  3. [Biomedical informatics].

    Science.gov (United States)

    Capurro, Daniel; Soto, Mauricio; Vivent, Macarena; Lopetegui, Marcelo; Herskovic, Jorge R

    2011-12-01

    Biomedical Informatics is a new discipline that arose from the need to incorporate information technologies to the generation, storage, distribution and analysis of information in the domain of biomedical sciences. This discipline comprises basic biomedical informatics, and public health informatics. The development of the discipline in Chile has been modest and most projects have originated from the interest of individual people or institutions, without a systematic and coordinated national development. Considering the unique features of health care system of our country, research in the area of biomedical informatics is becoming an imperative.

  4. Technological innovations and the rise of social inequalities in health.

    Science.gov (United States)

    Weiss, Daniel; Eikemo, Terje Andreas

    2017-11-01

    Social inequalities in health have been categorised as a human-rights issue that requires action. Unfortunately, these inequalities are on the rise in many countries, including welfare states. Various theories have been offered to explain the persistence (and rise) of these inequalities over time, including the social determinants of health and fundamental cause theory. Interestingly, the rise of modern social inequalities in health has come at a time of great technological innovation. This article addresses whether these technological innovations are significantly influencing the persistence of modern social inequalities in health. A theoretical argument is offered for this potential connection and is discussed alongside the typical social determinants of health perspective and the increasingly popular fundamental cause perspective. This is followed by a proposed research agenda for further investigation of the potential role that technological innovations may play in influencing social inequalities in health.

  5. Enhancing technological innovation in small firms: Role of collaboration

    International Nuclear Information System (INIS)

    Singh, D; Khamba, J S; Nanda, T

    2014-01-01

    Contribution of Micro-Small and Medium Enterprises (MSMEs) is highly remarkable in the overall industrial economy of the country. In recent years, the MSME sector has consistently registered higher growth rate compared to the overall industrial sector. With its agility and dynamism, the sector has shown admirable innovativeness and adaptability to survive the recent economic downturn and recession. However, MSMEs growth rate is still at low level. Therefore, it becomes essential for organizations to adopt new technologies or upgrade existing setup to meet continuously changing global market and fulfill customer needs. This paper explores the relationships between different collaboration networks and technological innovation of small firms through an extensive review of literature. The study finds that collaboration with larger enterprises, R and D institutions, universities and government agencies play a significant role in enhancing technological innovation in small firms

  6. Adding Entrepreneurship to India’s Science, Technology & Innovation Policy

    Directory of Open Access Journals (Sweden)

    Ragini Chaurasia

    2016-06-01

    Full Text Available Science, Technology & Innovation Policy (STIP is an important policy instrument particularly in the developing countries. India also has recognized the role of science, technology and innovation in development as early as 1958 but still trails behind its peer Brazil, China and the Asian tiger Singapore. Considering strong correlation between research and development investment and growth based on existing studies, this paper brings forth the present situation of India in investment and its influence on the performance of the economy vis-à-vis the three countries. This paper studies the STIP 2013 in detail and reports the contribution of the Department of Science and Technology in India. The main conclusion of this paper is the recommendation for incorporation of “entrepreneurship” in STIP based on global best practices, which can be achieved by government’s involvement as a venture capitalist to seed and support innovations, increasing transparency and incorporating entrepreneurial curriculum.

  7. Significance of promoting innovative efforts and technology transfer for industry

    Energy Technology Data Exchange (ETDEWEB)

    Rembser, J [Bundesministerium fuer Forschung und Technologie, Bonn-Bad Godesberg (Germany, F.R.)

    1978-11-01

    Technological know how and innovations will be of considerable future importance for West German industry. Changes in the reliability of sources of supply (energy, raw materials), the burden imposed on the environment by intensive industrial production and numerous private sources, and the stiffening of international competition necessitate cLoser collaboration between industry and government. Public aid in research and development efforts will assume an important role. In West Germany there is a wide variety of such governmental aids. The range extends from direct grants to enterprises for research and development work to the furnishing of advice to promote innovative efforts and technology transfer. Banks provide risk capital with governmental aid to firms trying to indroduce high-risk innovations into the market. In recent years the aim has been to provide small and medium-size firms with better access to technological know how and governmental aids.

  8. Policy and innovation: Nanoenergy technology in the USA and China

    International Nuclear Information System (INIS)

    Liu, Na; Guan, JianCheng

    2016-01-01

    The USA is a leading country while China is an up-and-coming one in nanotechnology. We carried out a cross-country comparative study on policy and innovation of the two countries in subset nanoenergy field. They both created favorable policy environments for nanotechnology involving applications of nanotechnology in the energy sector. However, Chinese policy deployments for nanotechnology lack coordinated arrangements and effective assessment mechanisms. China performs better than the USA in technological quantity, but weaker in technological influence. The USA expresses an industry-oriented model in nanoenergy technological research and development, but China exhibits a university-and-institute-oriented model. Interorganizational collaboration relationships in the two countries are both still very rare and have huge development space. They both have a long way to go in converting their technological achievements into commercial products, especially China. Finally, we provide the policy implications of this study. In particular, the Chinese government should strengthen its efforts in policies by changing the national S&T evaluation system to set up the basic idea that quality is better than quantity in order to raise the original innovation motivations of innovators. - Highlights: •We compare development status of nanoenergy technologies between China and the USA. •We mainly focus on their policies, innovation performance and pattern in nanoenergy. •Differences are observed in nanoenergy technologies developed in these two countries. •We propose their endeavor directions in nanoenergy based on this study.

  9. The Technological Innovations and Their Impact on the Economy

    Directory of Open Access Journals (Sweden)

    Mikhail Ivanovich Maslennikov

    2017-12-01

    Full Text Available Drastic and inclusive technology progress is changing the economy of Russia and foreign countries. This progress significantly impacts production forces. . This paper analyzes theoretical and applied approaches to the investigation of production forces development. I reveal the role and importance of innovations in science and technology as well as their impact on various segments of the economy. I analyze the conceptual framework used for technological shifts. The paper describes the indicators showing the level of scientific and technological potential development in various countries and regions including the Urals. I define growth areas in technology and assess their contribution to gross domestic product (GDP growth. The administrations and authorities at federal and regional levels impact the development of science, innovations, technologies and breakthrough areas. The development of these spheres leads to the increase in productivity of social activities, production and business activity. The paper reveals the impact of the technological breakthrough in such latest fields as the alternative energy sources, drones, electric car industry, storage and delivery of energy. This fields transform the economy and society. Furthermore, they change theoretical concepts of functional and institutional social structure. The development paradigm is to be modified from fuel and raw model to the innovative and technological one. The economic development and scientific and technological potential are interrelated. I discuss the reason of close attention to the development of science, technologies, innovations in the developed countries. as well as the measures to stimulate their development. The article studies the mechanism and tools of science and education funding in various regions of the world. The results of the research may be used for updating the strategy of scientific and technological development of Russia and its regions in the current

  10. FY10 Engineering Innovations, Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

    2011-01-11

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

  11. Innovative waste treatment and conditioning technologies at nuclear power plants

    International Nuclear Information System (INIS)

    2006-05-01

    The objective of this publication is to provide Member States with information on the most innovative technologies and strategies used in waste treatment and conditioning. At present, some of those technologies and strategies might not be widely implemented at nuclear power plants (NPP), but they have an important potential for their use as part of the long range NPP, utility, or national strategy. Thus, the target audience is those decision makers at the national and organizational level responsible for selecting waste processing technologies and strategies over a period of three to ten years. Countries and individual nuclear plants have limited financial resources which can be applied toward radioactive waste processing (treatment and conditioning). They are challenged to determine which of the many available technologies and strategies are best suited to meet national or local needs. This publication reduces the selection of processes for wastes generated by nuclear power plants to those technologies and strategies which are considered innovative. The report further identifies the key benefits which may derive from the adoption of those technologies, the different waste streams to which each technology is relevant, and the limitations of the technologies. The technologies and strategies identified have been evaluated to differentiate between (1) predominant technologies (those that are widely practiced in multiple countries or a large number of nuclear plants), and (2) innovative technologies (those which are not so widely used but are considered to offer benefits which make them suitable for broader application across the industry). Those which fall into the second category are the primary focus of this report. Many IAEA publications address the technical aspects of treatment and conditioning for radioactive wastes, covering research, technological advances, and safety issues. These studies and reports primarily target the research and technical staff of a

  12. New information technologies for an innovative education

    Directory of Open Access Journals (Sweden)

    Ion Smeureanu

    2011-12-01

    Full Text Available Information technology has a powerful impact on learning and the central idea of the current e-learning technologies is to provide users the ability to use and reuse of learning objects, which must be compatible with the learning management systems and with any other future technology from that field. The success of new learning technologies is related to student-centered learning approach, on skills which will be acquired as a result of learning. Their establishment is in close accordance with the didactic objectives of teaching the lessons. From informatics point of view the content to be taught in terms of components-based learning, which the existing software components are assembled into an application in such a way that they interact to get a predefined functionality. The components can react depending on the architecture where they are assembled. According to semantic model, the learning components can be assembled by manually, so as to provide a great opportunity for both students and teachers to exercise their creativity and vision. New information technologies, as component-oriented programming or service-oriented architecture, allow the easy handling and composition of learning objects even by non specialists, teachers who prepare their lessons according to their vision, or students who can practice the knowledge acquired solving the variants of problems studied.

  13. Biomedical technology

    CERN Document Server

    Wriggers, Peter

    2015-01-01

    During the last years computational methods lead to new approaches that can be applied within medical practice. Based on the tremendous advances in medical imaging and high-performance computing, virtual testing is able to help in medical decision processes or implant designs. Current challenges in medicine and engineering are related to the application of computational methods to clinical medicine and the study of biological systems at different scales. Additionally manufacturers will be able to use computational tools and methods to predict the performance of their medical devices in virtual patients. The physical and animal testing procedures could be reduced by virtual prototyping of medical devices. Here simulations can enhance the performance of alternate device designs for a range of virtual patients. This will lead to a refinement of designs and to safer products. This book summarizes different aspects of approaches to enhance function, production, initialization and complications of different types o...

  14. Competition and innovation in a technology setting software duopoly

    DEFF Research Database (Denmark)

    Bitzer, Jürgen; Schröder, Philipp

    2003-01-01

    the assumption that software producers compete in technology rather than price or quantities. The model includes the presence of technological progress and menu costs of adjusting existing software, i.e. innovation. It is found that: (i) moving from monopoly to duopoly does increase the technology level set......Recently the software industry has experienced fundamental changes in market structure through the entry of open source competitors, e.g. Linux's entry into the operating systems market. In a simple model we examine the effects of such a change in market structure from monopoly to duopoly under...... by firms in the software industry; (ii) a duopoly adjusts more readily to global technological progress than a monopolist. Furthermore, results are presented comparing open source versus for-profit firms in terms of technology levels and innovation....

  15. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  16. Innovative technologies for greenhouse gas emission reduction in steel production

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2016-01-01

    Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

  17. Innovation on Energy Power Technology (1)

    Science.gov (United States)

    Nagano, Susumu; Kakishima, Masayoshi

    After the last war, the output of single Steam Turbine Generator produced by the own technology in Japan returned to a prewar level. Electric power companies imported the large-capacity high efficiency Steam Turbine Generator from the foreign manufacturers in order to support the sudden increase of electric power demand. On the other hand, they decided to produce those in our own country to improve industrial technology. The domestic production of large-capacity 125MW Steam Turbine Generator overcome much difficulty and did much contribution for the later domestic technical progress.

  18. Information technology, knowledge processes, and innovation success

    NARCIS (Netherlands)

    Song, X.M.; Zang, F.; Bij, van der J.D.; Weggeman, M.C.D.P.

    2001-01-01

    Despite the obvious linkage between information technologies (IT) and knowledge processes and the apparent strategic importance of both, little research has done to explicitly examine how, if at all, IT and knowledge processes affect firm outcomes. The purpose of this study is to bridge this

  19. Reactor surface contamination stabilization. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-11-01

    Contaminated surfaces, such as the face of a nuclear reactor, need to be stabilized (fixed) to avoid airborne contamination during decontamination and decommissioning activities, and to prepare for interim safe storage. The traditional (baseline) method of fixing the contamination has been to spray a coating on the surfaces, but ensuring complete coverage over complex shapes, such as nozzles and hoses, is difficult. The Hanford Site C Reactor Technology Demonstration Group demonstrated innovative technologies to assess stabilization properties of various coatings and to achieve complete coverage of complex surfaces on the reactor face. This demonstration was conducted in two phases: the first phase consisted of a series of laboratory assessments of various stabilization coatings on metal coupons. For the second phase, coatings that passed the laboratory tests were applied to the front face of the C Reactor and evaluated. The baseline coating (Rust-Oleum No. 769) and one of the innovative technologies did not completely cover nozzle assemblies on the reactor face, the most critical of the second-phase evaluation criteria. However, one of the innovative coating systems, consisting of a base layer of foam covered by an outer layer of a polymeric film, was successful. The baseline technology would cost approximately 33% as much as the innovative technology cost of $64,000 to stabilize an entire reactor face (196 m 2 or 2116 ft 2 ) with 2,004 nozzle assemblies, but the baseline system failed to provide complete surface coverage

  20. Inferential statistics, power estimates, and study design formalities continue to suppress biomedical innovation

    OpenAIRE

    Kern, Scott E.

    2014-01-01

    Innovation is the direct intended product of certain styles in research, but not of others. Fundamental conflicts between descriptive vs inferential statistics, deductive vs inductive hypothesis testing, and exploratory vs pre-planned confirmatory research designs have been played out over decades, with winners and losers and consequences. Longstanding warnings from both academics and research-funding interests have failed to influence effectively the course of these battles. The NIH publicly...

  1. 76 FR 4137 - Comment Request: Innovative Technology Experiences for Students and Teachers (ITEST) Program

    Science.gov (United States)

    2011-01-24

    ... NATIONAL SCIENCE FOUNDATION Comment Request: Innovative Technology Experiences for Students and... Friday. SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students... Technology Experiences for Students and Teachers (ITEST) is a National Science Foundation program that...

  2. 77 FR 22359 - Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request

    Science.gov (United States)

    2012-04-13

    ... NATIONAL SCIENCE FOUNDATION Innovative Technology Experiences for Students and Teachers (ITEST.... SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students and Teachers... opportunities for students and teachers to learn about, experience, and use information technologies within the...

  3. [Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

    Science.gov (United States)

    Bohnet-Joschko, Sabine; Kientzler, Fionn

    2010-01-01

    Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

  4. Installation of an innovative remedial technology

    International Nuclear Information System (INIS)

    Hines, B.

    1995-01-01

    The major goal of the Lasagna trademark project was to design, construct, install, and operate an in situ remediation system in low-permeability soil. A new technology--the Lasagna process--uses electro-osmosis to move contaminated groundwater through treatment zones. The treatment zones are installed in contaminated soils, thereby forming an integrated in situ remedial process. Electro-osmosis, well known for its effectiveness and extremely low power consumption, uses a direct current to cause Groundwater to travel through low-permeability soil. When a bench-scale version of the technology was 98 percent effective in removing contamination, an actual field test was the next step. The site chosen for this first field effort was the DOE-owned Paducah Gaseous Diffusion Plant located in Paducah, Kentucky. The target contaminant for this project was trichloroethylene (TCE) because it is found at many sites across the country and is present at approximately 60 percent of DOE's sites

  5. Dynamic underground stripping. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    Dynamic Underground Stripping (DUS) is a combination of technologies targeted to remediate soil and ground water contaminated with organic compounds. DUS is effective both above and below the water table and is especially well suited for sites with interbedded sand and clay layers. The main technologies comprising DUS are steam injection at the periphery of a contaminated area to heat permeable subsurface areas, vaporize volatile compounds bound to the soil, and drive contaminants to centrally located vacuum extraction wells; electrical heating of less permeable sediments to vaporize contaminants and drive them into the steam zone; and underground imaging such as Electrical Resistance Tomography to delineate heated areas to ensure total cleanup and process control. A full-scale demonstration was conducted on a gasoline spill site at Lawrence Livermore National Laboratory in Livermore, California from November 1992 through December 1993

  6. Future Vehicle Technologies : high performance transportation innovations

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, T. [Future Vehicle Technologies Inc., Maple Ridge, BC (Canada)

    2010-07-01

    Battery management systems (BMS) were discussed in this presentation, with particular reference to the basic BMS design considerations; safety; undisclosed information about BMS; the essence of BMS; and Future Vehicle Technologies' BMS solution. Basic BMS design considerations that were presented included the balancing methodology; prismatic/cylindrical cells; cell protection; accuracy; PCB design, size and components; communications protocol; cost of manufacture; and expandability. In terms of safety, the presentation addressed lithium fires; high voltage; high voltage ground detection; crash/rollover shutdown; complete pack shutdown capability; and heat shields, casings, and impact protection. BMS bus bar engineering considerations were discussed along with good chip design. It was concluded that FVTs advantage is a unique skillset in automotive technology and the development of speed and cost effectiveness. tabs., figs.

  7. Investigation on the innovative impact hydroforming technology

    Science.gov (United States)

    Lihui, Lang; Shaohua, Wang; Chunlei, Yang

    2013-05-01

    Hydroforming has a rapid development recently which has good forming quality and less cost. However, it still cannot meet the requirements of forming complex parts with small features just like convex tables, or bars which are widely employed in automotive and aircraft industries. The impact hydroforming technology means the most features are formed by hydroforming and the small features are rapidly reshaped by high intensity impact energy in a very short time after the traditional hydroforming. The impact pressure rises to the peak in 10ms which belongs to dynamic loading. In this paper, impact hydroforming process is proposed. The generation and transmission of impact hydroforming energy and impact shock wave were studied and simulated. The deformation process of the metal disks under the dynamic impact loading condition presented impact hydroforming is an effective technology to form complex parts with small features.

  8. Business plan for a technology innovation

    OpenAIRE

    Leikas, Anniina

    2015-01-01

    The aim of this thesis was to create a business plan to understand the potential of the business idea and offer guidance when establishing a new business. The basis was to study the business environment in Finland and what factors need to considered in business planning process. Entrepreneurship is one pos-sibility for the author in the future. Large generations are retiring and the market has place for new entrepreneurs and ideas. The Technology industry is constantly evolving and new i...

  9. Converging blockchain and next-generation artificial intelligence technologies to decentralize and accelerate biomedical research and healthcare

    Science.gov (United States)

    Mamoshina, Polina; Ojomoko, Lucy; Yanovich, Yury; Ostrovski, Alex; Botezatu, Alex; Prikhodko, Pavel; Izumchenko, Eugene; Aliper, Alexander; Romantsov, Konstantin; Zhebrak, Alexander; Ogu, Iraneus Obioma; Zhavoronkov, Alex

    2018-01-01

    The increased availability of data and recent advancements in artificial intelligence present the unprecedented opportunities in healthcare and major challenges for the patients, developers, providers and regulators. The novel deep learning and transfer learning techniques are turning any data about the person into medical data transforming simple facial pictures and videos into powerful sources of data for predictive analytics. Presently, the patients do not have control over the access privileges to their medical records and remain unaware of the true value of the data they have. In this paper, we provide an overview of the next-generation artificial intelligence and blockchain technologies and present innovative solutions that may be used to accelerate the biomedical research and enable patients with new tools to control and profit from their personal data as well with the incentives to undergo constant health monitoring. We introduce new concepts to appraise and evaluate personal records, including the combination-, time- and relationship-value of the data. We also present a roadmap for a blockchain-enabled decentralized personal health data ecosystem to enable novel approaches for drug discovery, biomarker development, and preventative healthcare. A secure and transparent distributed personal data marketplace utilizing blockchain and deep learning technologies may be able to resolve the challenges faced by the regulators and return the control over personal data including medical records back to the individuals. PMID:29464026

  10. Converging blockchain and next-generation artificial intelligence technologies to decentralize and accelerate biomedical research and healthcare.

    Science.gov (United States)

    Mamoshina, Polina; Ojomoko, Lucy; Yanovich, Yury; Ostrovski, Alex; Botezatu, Alex; Prikhodko, Pavel; Izumchenko, Eugene; Aliper, Alexander; Romantsov, Konstantin; Zhebrak, Alexander; Ogu, Iraneus Obioma; Zhavoronkov, Alex

    2018-01-19

    The increased availability of data and recent advancements in artificial intelligence present the unprecedented opportunities in healthcare and major challenges for the patients, developers, providers and regulators. The novel deep learning and transfer learning techniques are turning any data about the person into medical data transforming simple facial pictures and videos into powerful sources of data for predictive analytics. Presently, the patients do not have control over the access privileges to their medical records and remain unaware of the true value of the data they have. In this paper, we provide an overview of the next-generation artificial intelligence and blockchain technologies and present innovative solutions that may be used to accelerate the biomedical research and enable patients with new tools to control and profit from their personal data as well with the incentives to undergo constant health monitoring. We introduce new concepts to appraise and evaluate personal records, including the combination-, time- and relationship-value of the data. We also present a roadmap for a blockchain-enabled decentralized personal health data ecosystem to enable novel approaches for drug discovery, biomarker development, and preventative healthcare. A secure and transparent distributed personal data marketplace utilizing blockchain and deep learning technologies may be able to resolve the challenges faced by the regulators and return the control over personal data including medical records back to the individuals.

  11. Cost and performance of innovative remediation technologies

    International Nuclear Information System (INIS)

    Cummings, J.B.; Kingscott, J.W.; Fiedler, L.D.

    1995-01-01

    The selection and use of more cost-effective remedies requires better access to data on the performance and cost of technologies used in the field. To make data more widely available, the US Environmental Protection Agency is working jointly with member agencies of the Federal Remediation Technologies Round table to publish case studies of full-scale remediation and demonstration projects. EPA, DoD, and DOE have published case studies of cleanup projects primarily consisting of bioremediation, soil vapor extraction, and thermal desorption. Within the limits of this initial data set, the paper evaluates technology performance and cost. In the analysis of cost factors, the paper shows the use of a standardized Work Breakdown Structure (WBS). Use of the WBS will be important in future reporting of completed projects to facilitate cost comparison. The paper notes the limits to normalization and thus cross-site comparison which can be achieved using the WBS. The paper identifies conclusions from initial efforts to compile cost and performance data, highlights the importance of such efforts to the overall remediation effort, and discusses future cost and performance documentation efforts

  12. Innovative technology summary report: Transportable vitrification system

    International Nuclear Information System (INIS)

    1998-09-01

    At the end of the cold war, many of the Department of Energy's (DOE's) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned

  13. The formalization of innovative processes of food technology equipment

    Directory of Open Access Journals (Sweden)

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  14. Development of Innovative Construction Technologies for ABWRs

    International Nuclear Information System (INIS)

    Yamashita, T.; Fukuda, T.; Masuda, N.

    2002-01-01

    This paper describes an effort by Tokyo Electric Power Company (TEPCO) to shorten the construction time in a drastic manner for the Advanced Boiling Water Reactors (ABWR), thereby aiming at reducing construction costs. First an outline of the actual construction records for the five BWR Units and the two ABWR Units at the Kashiwazaki-Kariwa site is introduced along with the construction methods employed for these units. There is a continued trend in the reduction of construction time from Unit 1 to 7 owing to a number of improvements made to these units, and in particular it is noteworthy that the drastic reduction was accomplished due to the change in reactor type from BWR to ABWR. Explained next is an on-going effort for the next ABWR and the following next generation of ABWRs to further shorten construction time. In this effort an emphasis is laid on the development of innovative construction methods by the adoption of steel plate/concrete composite structures (SC Structure), and the application of those structures even to containment vessel (so-called SCCV). This work is being conducted as part of TEPCO's research and development for the next generation ABWRs (ABWR II). Presently it is expected that the construction time from bedrock inspection to fuel loading could be shortened in a stepwise fashion to 38 and 31.5 months for the next ABWR and finally to 23 months for the next generation ABWR II, thus enabling a greatly reduced power generating cost and enhanced safety during construction. In addition to the above effort, a preliminary study has been performed concerning the application of base isolation systems to ABWR plants. From this study which is aimed at standardization, lowered cost and mitigation of engineering work, it was found that base isolation system effectively reduces seismic response and is instrumental in achieving the above-mentioned objectives. Therefore it can be said that the use of this system gives more freedom in selecting sites

  15. Technological innovations in forensic genetics: social, legal and ethical aspects.

    Science.gov (United States)

    Wienroth, Matthias; Morling, Niels; Williams, Robin

    2014-01-01

    This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology expectations, social identities, and legal institutions. It also considers how imagined and actual uses of forensic genetic technologies are entangled with assertions about social order, affirmations of common values and civil rights, and promises about security and justice. Our comments seek to encourage the participation of scientific actors in the development of anticipatory governance deliberations concerning the widening application of forensic genetics in an increasing number of criminal and civil jurisdictions.

  16. DYNAPHORE, INC., FORAGER SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. he technology treats contaminated groundwater, surface voters and porous waters by absorbing d...

  17. Innovation capabilities in food and beverages and technology-based innovation projects

    NARCIS (Netherlands)

    Tepic, M.; Fortuin, F.T.J.M.; Kemp, R.G.M.; Omta, S.W.F.

    2014-01-01

    Purpose - The aim of this paper is to establish the differences between the food and beverages (F&B) and technology-based industries with regards to the relation between previously identified success factors and innovation project performance. Design/methodology/approach - These differences are

  18. Social innovation to reduce the gap between innovative assistive technology and people living with dementia

    NARCIS (Netherlands)

    L. van Gastel; L. Snaphaan; MD E.J.M. Wouters; E. van der Lubbe-Verhaegh; I. Bongers

    2016-01-01

    Purpose Currently, most technology (robotics, smart homes, etc) that has been developed for the healthcare sector are difficult in use, expensive and often not affordable for individual persons in their home situation. Affordable innovations that activate people instead of taking tasks over can be a

  19. Innovative technologies for managing oil field waste

    International Nuclear Information System (INIS)

    Veil, J.A.

    2003-01-01

    Each year, the oil industry generates millions of barrels of wastes that need to be properly managed. For many years, most oil field wastes were disposed of at a significant cost. However, over the past decade, the industry has developed many processes and technologies to minimize the generation of wastes and to more safely and economically dispose of the waste that is generated. Many companies follow a three-tiered waste management approach. First, companies try to minimize waste generation when possible. Next, they try to find ways to reuse or recycle the wastes that are generated. Finally, the wastes that cannot be reused or recycled must be disposed of. Argonne National Laboratory (Argonne) has evaluated the feasibility of various oil field waste management technologies for the U.S. Department of Energy. This paper describes four of the technologies Argonne has reviewed. In the area of waste minimization, the industry has developed synthetic-based drilling muds (SBMs) that have the desired drilling properties of oil-based muds without the accompanying adverse environmental impacts. Use of SBMs avoids significant air pollution from work boats hauling offshore cuttings to shore for disposal and provides more efficient drilling than can be achieved with water-based muds. Downhole oil/water separators have been developed to separate produced water from oil at the bottom of wells. The produced water is directly injected to an underground formation without ever being lifted to the surface, thereby avoiding potential for groundwater or soil contamination. In the area of reuse/recycle, Argonne has worked with Southeastern Louisiana University and industry to develop a process to use treated drill cuttings to restore wetlands in coastal Louisiana. Finally, in an example of treatment and disposal, Argonne has conducted a series of four baseline studies to characterize the use of salt caverns for safe and economic disposal of oil field wastes.

  20. Nuclear waste transmutation and related innovative technologies

    International Nuclear Information System (INIS)

    2002-01-01

    The main topics of the summer school meeting were 1. Motivation and programs for waste transmutation: The scientific perspective roadmaps; 2. The physics and scenarios of transmutation: The physics of transmutation and adapted reactor types. Impact on the fuel cycle and possible scenarios; 3. Accelerator driven systems and components: High intensity accelerators. Spallation targets and experiments. The sub critical core safety and simulation physics experiments; 4. Technologies and materials: Specific issues related to transmutation: Dedicated fuels for transmutation. Fuel processing - the role of pyrochemistry. Materials of irradiation. Lead/lead alloys. 5. Nuclear data: The N-TOF facility. Intermediate energy data and experiments. (orig./GL)

  1. Management and innovation of small science and technology libraries

    International Nuclear Information System (INIS)

    Yang Shumei

    2014-01-01

    This paper describes the new conception of management and service of small science and technology libraries in research and development institutions (R and D institutions), in the light of characteristics of the R and D institution, this paper gives the small science and technology libraries the new and advanced knowledge of management and service. Moreover, this paper gives instructions on knowledge management and service innovation in future practice. (author)

  2. FY2011 Engineering Innovations, Research, and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Kip [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, Harry E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Poyneer, Lisa A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shusteff, Maxim [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Spadaccini, Christopher M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hopkins, Jonathan B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bernier, Joel V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); King, Michael J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Puso, Michael A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Weisgraber, Todd H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Goldstein, Noah C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sales, Ana Paula De Oliveira [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dehlinger, Dietrich A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotovsky, Jack [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kuntz, Joshua D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Voss, Lars F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wheeler, Elizabeth K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chang, John T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lehman, Sean K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vernon, Stephen P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tang, Vincent [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-04-24

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory’s Engineering Directorate for FY2011. These efforts exemplify Engineering’s nearly 60-year history of developing and applying the technology innovations needed for the Laboratory’s national security missions, and embody Engineering’s mission to “Enable program success today and ensure the Laboratory’s vitality tomorrow.

  3. Blockchain - an Innovation Technology of the Post-Industrial Economy

    OpenAIRE

    Arkhireiska Natalia V.

    2017-01-01

    The article is aimed at studying the innovation technology of the post-industrial economy - blockchain. It has been found that blockchain is a multifunctional and multi-level information technology designed to reliably account for different assets. It has been proved that the most important today is blockchain for Bitcoin. The article explores the opportunities, prospects and risks associated with investment in cryptocurrency. It has been determined that the main advantages of investment in B...

  4. Innovative Technologies for the Protection of Historical Structures against Earthquakes

    Directory of Open Access Journals (Sweden)

    Fuat Aras

    2016-01-01

    This study aims to represent innovative technologies and strategies to preserve the cultural heritage structures against earthquake effect. In particular, the application of fibre reinforced polymers and structural control systems are explained. Suitability of the strategies to architectural, historical and structural features and reversibility aspects are evaluated. As a case study the application of these strategies to a historical building in Istanbul is discussed.

  5. Reasons for adopting technological innovations reducing physical workload in bricklaying

    NARCIS (Netherlands)

    Jong, A.M. de; Vink, P.; Kroon, J.C.A. de

    2003-01-01

    In this paper the adoption of technological innovations to improve the work of bricklayers and bricklayers' assistants is evaluated. Two studies were performed among 323 subjects to determine the adoption of the working methods, the perceived workload, experiences with the working methods, and the

  6. Enhancing Teachers' Motivation to Apply Humanist Information Technology Innovations

    Science.gov (United States)

    Assor, Avi

    2009-01-01

    This article focuses on the following issue: How can we build a training and support system that would enhance the motivation and capacity of teachers for high-quality implementation of information technology innovations guided by humanist ideas? That is, a system that would not only increase teachers' motivation to apply Humanist Information…

  7. A percolation model of innovation in complex technology spaces

    NARCIS (Netherlands)

    Silverberg, G.; Verspagen, B.

    2002-01-01

    Innovations are known to arrive more highly clustered than if they were purely random, and their rate of arrival has been increasing nearly exponentially for several centuries. Their distribution of importance is highly skewed and appears to obey a power law or lognormal distribution. Technological

  8. Innovations in agriculture: strengthening resilience through science and technology?

    NARCIS (Netherlands)

    Verhoog, S.M.

    2016-01-01

    Current developments as a direct result from the (binding) Paris Agreement1, adopted at the COP 21 December 2015, seem promising since the predominant role of science, technology and innovation in achieving the SDGs. Increasing farmers’ resilience toward climate change through new approaches as

  9. Sustainable school infrastructure through effective innovative building technology selection

    CSIR Research Space (South Africa)

    Mphahlele, C

    2014-10-01

    Full Text Available The aim of the paper is to provide an overview of a model proposed for the selection Innovative Building Technologies (IBTs) and procurement of services supporting the erection of the IBTs that will ensure the construction of a sustainable school...

  10. The Technology of Forming of Innovative Content for Engineering Education

    Science.gov (United States)

    Kayumova, Lilija A.; Savva, Lubov I.; Soldatchenko, Aleksandr L.; Sirazetdinov, Rustem M.; Akhmetov, Linar G.

    2016-01-01

    The relevance of the study is conditioned by the modernization of engineering education aimed at specialists' training to solve engineering and economic problems effectively. The goal of the paper is to develop the technology of the innovative content's formation for engineering education. The leading method to the study of this problem is a…

  11. Institutional and societal innovations in information technology for developing countries

    NARCIS (Netherlands)

    James, M.J.

    2012-01-01

    Innovation in the developed countries is heavily based on R&D and is closely related to income, skills and infrastructure in those countries. Little is geared towards IT problems of poor countries. This technology does not suit the incomes, skills and so on of poor countries. Fortunately another

  12. Base technology development of new materials for FBR performance innovations

    International Nuclear Information System (INIS)

    Kano, Shigeki; Koyama, Masahiro; Nomura, Shigeo; Morikawa, Satoru; Ueno, Fumiyoshi

    1989-01-01

    This paper describes the base technology development of new materials for FBR performance innovations at the Power Reactor and Nuclear Fuel Development Corporation. The contents are as follows: (1) development of sodium and radiation resistant new materials, (2) development of high performance shielding material, (3) development of high performance control material, (4) development of new functional materials for reactor instrumentation. (author)

  13. school-based data and management of technological innovations

    African Journals Online (AJOL)

    PROF EKWUEME

    innovations in public secondary schools in Cross River State. One hypothesis ... technology go hand in hand. Advances in ... Osika E. Okon, Department of Educational Administration and Planning, University of Calabar, Calabar, .... Science teachers in 50 middle schools located in five urban districts in the United States of.

  14. Science, Technology and Innovation: Concepts, Theory and Policy

    OpenAIRE

    Zehra Taşkın; Güleda Doğan

    2016-01-01

    This study is a review of the book entitled “Science, Technology and Innovation: Concepts, Theory and Policy”. In the converging world, the book is an important contribution not only for the field of economy, but also information science which includes information-economy concepts.

  15. Financing innovative technologies in wind projects

    International Nuclear Information System (INIS)

    Vaughan, C.

    2006-01-01

    Methods of market entry and the financing of new technologies were discussed from the perspective of Clipper Windpower, a wind energy company based in the northeastern United States and Canada. Many new technology companies only consider private equity when seeking financing for new product development. However, financing for projects and products is only the first step to market entry. Wind projects are the financial equivalent of a high yield bond with mechanical risk. Many wind power projects with company equity can also be seen as a long term bond with upside in any given year. It is therefore important for wind developers to seek out strategic buyers for both product development and project development, in addition to finding sources of private equity. Clipper Windpower Inc. has developed a partnership with British Petroleum (BP), who hold an equity interest in the company. Both companies are now partnering on projects with Clipper turbines, and firm orders are in place for 2007 and 2008. As a result of the partnership, Clipper now has increased its financial strength in cash flows, balance sheets, and projected revenue. It was concluded that a successful partnership can increase the scale of wind power development, and bring financial sophistication to smaller companies with limited resources. refs., tabs., figs

  16. Expedited site characterization. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Expedited Site Characterization (ESC) has been developed, demonstrated, and deployed as a new time-saving, cost-effective approach for hazardous waste site investigations. ESC is an alternative approach that effectively shortens the length of the assessment period and may significantly reduce costs at many sites. It is not a specific technology or system but is a methodology for most effectively conducting a site characterization. The principal elements of ESC are: a field investigation conducted by an integrated team of experienced professionals working in the field at the same time, analysis, integration and initial validation of the characterization data as they are obtained in the field, and a dynamic work plan that enables the team to take advantage of new insights from recent data to adjust the work plan in the field. This report covers demonstrations that took place between 1989 and 1996. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues, and lessons learned.

  17. Expedited site characterization. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    Expedited Site Characterization (ESC) has been developed, demonstrated, and deployed as a new time-saving, cost-effective approach for hazardous waste site investigations. ESC is an alternative approach that effectively shortens the length of the assessment period and may significantly reduce costs at many sites. It is not a specific technology or system but is a methodology for most effectively conducting a site characterization. The principal elements of ESC are: a field investigation conducted by an integrated team of experienced professionals working in the field at the same time, analysis, integration and initial validation of the characterization data as they are obtained in the field, and a dynamic work plan that enables the team to take advantage of new insights from recent data to adjust the work plan in the field. This report covers demonstrations that took place between 1989 and 1996. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues, and lessons learned

  18. Corrosion probe. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-05-01

    Over 253 million liters of high-level waste (HLW) generated from plutonium production is stored in mild steel tanks at the Department of Energy (DOE) Hanford Site. Corrosion monitoring of double-shell storage tanks (DSTs) is currently performed at Hanford using a combination of process knowledge and tank waste sampling and analysis. Available technologies for corrosion monitoring have progressed to a point where it is feasible to monitor and control corrosion by on-line monitoring of the corrosion process and direct addition of corrosion inhibitors. The electrochemical noise (EN) technique deploys EN-based corrosion monitoring probes into storage tanks. This system is specifically designed to measure corrosion rates and detect changes in waste chemistry that trigger the onset of pitting and cracking. These on-line probes can determine whether additional corrosion inhibitor is required and, if so, provide information on an effective end point to the corrosion inhibitor addition procedure. This report describes the technology, its performance, its application, costs, regulatory and policy issues, and lessons learned

  19. A progressive review of Sandhana kalpana (Biomedical fermentation): An advanced innovative dosage form of Ayurveda

    Science.gov (United States)

    Chaudhary, Anand; Singh, Neetu; Dalvi, Madhuri; Wele, Asmita

    2011-01-01

    Sandhana kalpana (biomedical fermented formulations) are one of the best dosage forms of Ayurveda in practice since thousands of years. In order to prepare these medicaments, certain sets of conditions are prearranged, which lead to fermentation. Thus, products bequeath with self-generated ethyl alcohol, which potentiate these preparations (Asava–Arishta), pharmaceutically and therapeutically. Commonly, medicinal and commercial components of these formulations are prompting many researchers to contribute in manufacturing, quality control, safety, and efficacy of these formulations. To cope up with this, literature related to Asava–Arishta has been surveyed from the Vedic period to recent publications of Government of India, ie, Ayurvedic Formulary of India, and presented briefly here. In this review paper, we have discussed pioneering facts such as nature and amount of carbohydrate, type of containers, optimum temperature, variety and relevance of initiator of fermentation, manufacturing, regulatory rules, and business aspects of Asava-Arishta. After going through this basic information, any academician or researcher may show a way to further strengthen this dosage form. PMID:22529661

  20. Concrete shaver. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    The US Department of Energy (DOE) is in the process of decontamination and decommissioning (D and D) for many of its nuclear facilities throughout the United States. These facilities must be dismantled and the demolition waste sized into manageable pieces for handling and disposal. The facilities undergoing D and D are typically chemically and/or radiologically contaminated. To facilitate this work, DOE requires a tool capable of removing the surface of radiologically contaminated concrete floors. Operating requirements for the tool include simple and economical operation, the capability of operating in ambient temperatures from 3 C to 40 C (37 F to 104 F), and the ability to be easily decontaminated. The tool also must be safe for workers. The Marcrist Industries Limited concrete shaver is an electrically driven, self-propelled concrete and coating removal system. This technology consists of a 25-cm (10-in.)-wide diamond impregnated shaving drum powered by an electric motor and contains a vacuum port for dust extraction. The concrete shaver is ideal for use on open, flat, floor areas. The shaver may also be used on slightly curved surfaces. This shaver is self-propelled and produces a smooth, even surface with little vibration. The concrete shaver is an attractive alternative to traditional pneumatic scabbling tools, which were considered the baseline in this demonstration. The use of this tool reduces worker fatigue (compared to the baseline) due to lower vibration. The shaver is more than five times faster than the five-piston pneumatic scabbler at removing contamination from concrete. Because of this increased productivity, the shaver is 50% less costly to operate than baseline technologies. The DOE has successfully demonstrated the concrete shaver for decontaminating floors for free-release surveys prior to demolition work

  1. Technology innovation for infectious diseases in the developing world.

    Science.gov (United States)

    So, Anthony D; Ruiz-Esparza, Quentin

    2012-10-25

    Enabling innovation and access to health technologies remains a key strategy in combating infectious diseases in low- and middle-income countries (LMICs). However, a gulf between paying markets and the endemicity of such diseases has contributed to the dearth of R&D in meeting these public health needs. While the pharmaceutical industry views emerging economies as potential new markets, most of the world's poorest bottom billion now reside in middle-income countries--a fact that has complicated tiered access arrangements. However, product development partnerships--particularly those involving academic institutions and small firms--find commercial opportunities in pursuing even neglected diseases; and a growing pharmaceutical sector in BRICS countries offers hope for an indigenous base of innovation. Such innovation will be shaped by 1) access to building blocks of knowledge; 2) strategic use of intellectual property and innovative financing to meet public health goals; 3) collaborative norms of open innovation; and 4) alternative business models, some with a double bottom line. Facing such resource constraints, LMICs are poised to develop a new, more resource-effective model of innovation that holds exciting promise in meeting the needs of global health.

  2. Technology Foresight on Emerging Technologies: Implications for a National Innovation Initiative in Brazil

    Directory of Open Access Journals (Sweden)

    Maria Fatima Ludovico de Almeida

    2015-07-01

    Full Text Available Prospective studies about emerging technologies and their implications for public policy formulation indicate critical choices ranging from global to national level, even to the individual firm or institution. Emerging technologies have been shaping the future of some industries and transforming many others. In many cases, these technologies will determine the restructuring of industries as never before. Specially designed for enabling better planning and future decisions, technology foresight (TF methods are used to foresee diffusion of innovations, mapping out commercially viable roadmaps for technological development. This paper is concerned with a methodological instrument adopted in Brazil as support for building the Agenda for a National Innovation Initiative (NII, which was articulated by government, universities, R&D institutions, and private firms. It presents and discusses an integrated methodological approach for a TF study, specially designed for the purpose of this Brazilian innovation policy instrument, concerning three emerging technologies – nanotechnology, biotechnology, and information and communication technologies (ICT.

  3. 3D printing – a key technology for tailored biomedical cell culture lab ware

    Directory of Open Access Journals (Sweden)

    Schmieder Florian

    2016-09-01

    Full Text Available Today’s 3D printing technologies offer great possibilities for biomedical researchers to create their own specific laboratory equipment. With respect to the generation of ex vivo vascular perfusion systems this will enable new types of products that will embed complex 3D structures possibly coupled with cell loaded scaffolds closely reflecting the in-vivo environment. Moreover this could lead to microfluidic devices that should be available in small numbers of pieces at moderate prices. Here, we will present first results of such 3D printed cell culture systems made from plastics and show their use for scaffold based applications.

  4. Updating the biomedical engineering curriculum: Inclusion of Health Technology Assessment subjects.

    Science.gov (United States)

    Martinez Licona, Fabiola; Urbina, Edmundo Gerardo; Azpiroz-Leehan, Joaquin

    2010-01-01

    This paper describes the work being carried out at Metropolitan Autonomous University (UAM) in Mexico City with regard to the continuous evaluation and updating of the Biomedical Engineering (BME) curriculum. In particular the courses regarded as part of the BME basic branch are reduced and new sets of elective subjects are proposed in order to bring closer the research work at UAM with the subjects in the BME curriculum. Special emphasis is placed on subjects dealing with Health Technology Assessment (HTA) and Health economics, as this branch of the BME discipline is quite promising in Mexico, but there are very few professionals in the field with adequate qualifications.

  5. Science and technology of biocompatible thin films for implantable biomedical devices.

    Energy Technology Data Exchange (ETDEWEB)

    Li, W.; Kabius, B.; Auciello, O.; Materials Science Division

    2010-01-01

    This presentation focuses on reviewing research to develop two critical biocompatible film technologies to enable implantable biomedical devices, namely: (1) development of bioinert/biocompatible coatings for encapsulation of Si chips implantable in the human body (e.g., retinal prosthesis implantable in the human eye) - the coating involves a novel ultrananocrystalline diamond (UNCD) film or hybrid biocompatible oxide/UNCD layered films; and (2) development of biocompatible films with high-dielectric constant and microfabrication process to produce energy storage super-capacitors embedded in the microchip to achieve full miniaturization for implantation into the human body.

  6. Innovative forming and fabrication technologies : new opportunities.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest

  7. Teachers in school-based technology innovations : A typology of their beliefs on teaching and technology

    NARCIS (Netherlands)

    Admiraal, Wilfried; Louws, Monika; Lockhorst, Ditte; Paas, Tineke; Buynsters, Michael; Cviko, Amina; Janssen, Caressa; de Jonge, Mario; Nouwens, Suzan; Post, Lysanne S.; van der Ven, Frauke; Kester, Liesbeth

    2017-01-01

    In many innovations in technology and education in secondary schools, teachers are the crucial agents of these innovations. To select, match and support groups of teachers for particular school projects, school principals could be supported with insights into teachers’ beliefs about teaching,

  8. SRS tank closure. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-08-01

    High-level waste (HLW) tank closure technology is designed to stabilize any remaining radionuclides and hazardous constituents left in a tank after bulk waste removal. Two Savannah River Site (SRS) HLW tanks were closed after cleansing and then filling each tank with three layers of grout. The first layer consists of a chemically reducing grout. The fill material has chemical properties that retard the movement of some radionuclides and chemical constituents. A layer of controlled low-strength material (CLSM), a self-leveling fill material, is placed on top of the reducing grout. CLSM provides sufficient strength to support the overbearing weight. The final layer is a free-flowing, strong grout similar to normal concrete. After the main tank cavity is filled, risers are filled with grout, and all waste transfer piping connected to the tank is isolated. The tank ventilation system is dismantled, and the remaining systems are isolated. Equipment that remains with the tank is filled with grout. The tank and ancillary systems are left in a state requiring only limited surveillance. Administrative procedures are in place to control land use and access. DOE eventually plans to remove all of its HLW storage tanks from service. These tanks are located at SRS, Hanford, and Idaho National Engineering and Environmental Laboratory. Low-activity waste storage tanks at Oak Ridge Reservation are also scheduled for closure

  9. Innovative technology summary report: Pipe Explorertrademark system

    International Nuclear Information System (INIS)

    1996-01-01

    The Pipe Explorertrademark system, developed by Science and Engineering Associates, Inc. (SEA), under contract with the US Department of Energy (DOE) Morgantown Energy Technology Center, has been used to transport various characterizing sensors into piping systems that have been radiologically contaminated. DOE's nuclear facility decommissioning program must characterize radiological contamination inside piping systems before the pipe can be recycled, remediated, or disposed. Historically, this has been attempted using hand-held survey instrumentation, surveying only the accessible exterior portions of pipe systems. Various measuring difficulties, and in some cases, the inability to measure threshold surface contamination values and worker exposure, and physical access constraints have limited the effectiveness of traditional survey approaches. The Pipe Explorertrademark system provides a viable alternative. The heart of the system is an air-tight membrane, which is initially spooled inside a canister. The end of the membrane protrudes out of the canister and attaches to the pipe being inspected. The other end of the tubular membrane is attached to the tether and characterization tools. When the canister is pressurized, the membrane inverts and deploys inside the pipe. The characterization detector and its cabling is attached to the tethered end of the membrane. As the membrane is deployed into the pipe, the detector and its cabling is towed into the pipe inside the protective membrane; measurements are taken from within the protective membrane. Once the survey measurements are completed, the process is reversed to retrieve the characterization tools

  10. Innovation in electric power technologies in 2009

    International Nuclear Information System (INIS)

    Ohfusa, Takahiro; Hayasaka, Eiji; Ino, Hiroyuki

    2010-01-01

    This is a report of the title by Tokyo Electric Power Company, Kansai Electric Power Co., Inc, Tohoku Electric Power and other nine enterprises in Japan. The outline is as follows. Tokyo Electric Power Company stated pipe thinning by the hot water based two-phase flow testing device, development of technologies for corrosion protection of nuclear reactor using titanium oxide, evaluation of fatigue damage by EBSD, and study of duty on the nuclear power plant. Japan Atomic Power Company (JAPC) stated the mechanism of decrease in exposure dose of the primary coolant system by zinc infusion, outline of Air Operated Valve Intelligent Diagnostic Analysis System (AVIDAS) and the grand packing system, development of SAPLS, the automatic search program of fuel position for design of PWR related core, development of compact containment water reactor (CCR) and FBR cycle system, investigation of the chain destruction of active fault under consideration of dynamic interaction of active faults and decommissioning of Tokai Nuclear Power Plant. Electric Power Development Company reported construction of the Oma Nuclear Power Plant, a future nuclear plant in Oma, Aomori. The reactor will be capable of using 100% MOX fuel core (MOX-ABWR). The operation will start November 2014. (S.Y.)

  11. Using the regularities of high and critical technologies developing in innovative project management

    OpenAIRE

    S. G. Selivanov; S. V. Poezjalova; A. F. Shayhulova

    2014-01-01

    Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE) integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and con...

  12. Ricor's anniversary of 50 innovative years in cryogenic technology

    Science.gov (United States)

    Filis, Avishai; Segal, Victor; Pundak, Nachman; Bar Haim, Zvi; Danziger, Menachem

    2017-05-01

    Ricor cryogenics was founded in 1967 and since then it has focused on innovative technologies in the cryogenic field. The paper reviews the initial research and development efforts invested in various technologies that have yielded products such as Cryostats for Mossbauer Effect measurement, Liquid gas Dewar containers, Liquid helium vacuum transfer tubes, Cryosurgery and other innovative products. The major registered patents that matured to products such as a magnetic vacuum valve operator, pumped out safety valve and other innovations are reviewed here. As a result of continuous R and D investment, over the years a new generation of innovative Stirling cryogenic products has developed. This development began with massive split slip-on coolers and has progressed as far as miniature IDDCA coolers mainly for IR applications. The accumulated experience in Stirling technology is used also as a platform for developing self-contained water vapor pumps known as MicroStar and NanoStar. These products are also used in collaboration with a research institute in the field of High Temperature Superconductors. The continuous growth in the cryogenic products range and the need to meet market demands have motivated the expansion, of Ricor's manufacturing facility enabling it to become a world leader in the cryocooler field. To date Ricor has manufactured more than 120,000 cryocoolers. The actual cryogenic development efforts and challenges are also reviewed, mainly in the field of long life cryocoolers, ruggedized products, miniaturization and products for space applications.

  13. Educational innovation, learning technologies and Virtual culture potential'

    Directory of Open Access Journals (Sweden)

    David Riley

    2002-12-01

    Full Text Available Learning technologies are regularly associated with innovative teaching but will they contribute to profound innovations in education itself? This paper addresses the question by building upon Merlin.Donald's co-evolutionary theory of mind, cognition and culture. He claimed that the invention of technologies for storing and sharing external symbol systems, such as writing, gave rise to a 'theoretic culture' with rich symbolic representations and a resultant need for formal education. More recently, Shaffer and Kaput have claimed that the development of external and shared symbol-processing technologies is giving rise to an emerging 'virtual culture'. They argue that mathematics curricula are grounded in theoretic culture and should change to meet the novel demands of 'virtual culture' for symbol-processing and representational fluency. The generic character of their cultural claim is noted in this paper and it is suggested that equivalent pedagogic arguments are applicable across the educational spectrum. Hence, four general characteristics of virtual culture are proposed, against which applications of learning technologies can be evaluated for their innovative potential. Two illustrative uses of learning technologies are evaluated in terms of their 'virtual culture potential' and some anticipated questions about this approach are discussed towards the end of the paper.

  14. A survey of environmental needs and innovative technologies in Germany

    International Nuclear Information System (INIS)

    Voss, C.F.; Roberds, W.J.

    1995-05-01

    The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM's needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US

  15. Product and technology innovation: what can biomimicry inspire?

    Science.gov (United States)

    Lurie-Luke, Elena

    2014-12-01

    Biomimicry (bio- meaning life in Greek, and -mimesis, meaning to copy) is a growing field that seeks to interpolate natural biological mechanisms and structures into a wide range of applications. The rise of interest in biomimicry in recent years has provided a fertile ground for innovation. This review provides an eco-system based analysis of biomimicry inspired technology and product innovation. A multi-disciplinary framework has been developed to accomplish this analysis and the findings focus on the areas that have been most strikingly affected by the application of biomimicry and also highlight the emerging trends and opportunity areas. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. Surveillance and Measurement System (SAMS). Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for the decontamination and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology sponsors large-scale demonstration and deployment projects (LSDDPs) to identify and demonstrate technologies that will be safer and more cost-effective. At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects as well as others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased cost of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) LSDDP generated a list of need statements defining specific needs or problems where improved technologies could be incorporated into ongoing D and D tasks. Advances in characterization technologies are continuously being sought to decrease the cost of sampling and increase the speed of obtaining results. Currently it can take as long as 90 days to receive isotopic analysis of radioactive samples from laboratories on soil, liquid, and paint samples. The cost to analyze these types of samples for radionuclides is about $150 per sample. This demonstration investigated the feasibility of using the Surveillance and Measurement System (SAMS) (innovative technology) to make in situ isotopic radiation measurements in paint and soil. Sample collection and on-site laboratory analysis (baseline technology) is currently being used on D and D sampling activities. Benefits expected from using the innovative technology include: Significant decrease in time to receive results on radiological samples; Decrease in cost associated with sample collection, preparation, analysis, and disposal; Equivalent data quality to laboratory analysis; and Fewer

  17. Innovative technology summary report: Concrete grinder

    International Nuclear Information System (INIS)

    1998-09-01

    The Flex concrete grinder is a lightweight, hand-held concrete and coating removal system used for decontaminating or stripping concrete surfaces. The US Department of Energy has successfully demonstrated it for decontaminating walls and floors for free release surveys prior to demolition work. The grinder is an electric-powered tool with a vacuum port for dust extraction and a diamond grinding wheel. The grinder is suitable for flat or slightly curved surfaces and results in a smooth surface, which makes release surveys more reliable. The grinder is lightweight and produces very little vibration, thus reducing worker fatigue. The grinder is more efficient than traditional baseline, tools at removing contamination from concrete surfaces (more than four times faster than hand-held pneumatic scabbling and scaling tools). Grinder consumables (i.e., replacement diamond grinding wheel) are more expensive than the replacement carbide parts for the scaler and scabbler. However, operating costs are outweighed by the lower purchase price of the grinder (50% of the price of the baseline scaler and 8% of the price of the baseline scabbler). Overall, the concrete grinder is an attractive alternative to traditional scabbling and scaling pneumatic tools. To this end, in July 1998, the outer rod room exposed walls of the Safe Storage Enclosure (SSE), an area measuring approximately 150 m 2 , may be decontaminated with the hand-held grinder. This concrete grinder technology was demonstrated for the first time at the DOE's Hanford Site. Decontamination of a sample room walls was performed at the C Reactor to free release the walls prior to demolition. The demonstration was conducted by onsite D and D workers, who were instructed by the vendor prior to and during the demonstration

  18. Understanding the build-up of a technological innovation system around hydrogen and fuel cell technologies

    NARCIS (Netherlands)

    Suurs, R.A.A.; Hekkert, M.P.; Smits, R.E.H.M.

    2009-01-01

    This study provides insight into the development of hydrogen and fuel cell technologies in the Netherlands (1980-2007). This is done by applying a Technological Innovation System (TIS) approach. This approach takes the perspective that a technology is shaped by a surrounding network of actors,

  19. Socio-economic research for innovative energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Yuichi [Tokyo Univ., High Temperature Plasma Center, Kashiwa, Chiba (Japan); Okano, Kunihiko [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    2006-10-15

    In the 21st century global environment and energy issues become very important, and this is characterized by the long-term (in the scale of a few tens years) and world-wide issue. In addition, future prospect of these issues might be quite uncertain, and scientific prediction could be very difficult. For these issues vigorous researches and various efforts have been carried out from various aspects; e.g., world-wide discussion such as COP3 in Kyoto, promotion of the energy-saving technology and so on. Development of environment-friendly energy has been promoted, and new innovative technologies are explored. Nuclear fusion is, of course, a promising candidate. While, there might be some criticism for nuclear fusion from the socio-economic aspect; e.g., it would take long time and huge cost for the fusion reactor development. In addition, other innovative energy technologies might have their own criticism, as well. Therefore, socio-economic research might be indispensable for future energy resources. At first we have selected six items as for the characteristics, which might be important for future energy resources; i.e., energy resource, environmental load, economics, reliability/stability, flexibility on operation and safety/security. Concerning to innovative energy technologies, we have nominated seven candidates; i.e., advanced coal technology with CO2 recovery system, SOFC top combined cycle, solar power, wind power, space solar power station, advanced fission and fusion. Based on questionnaires for ordinary people and fusion scientists, we have tried to assess the fusion energy development, comparing with other innovative energy technologies. (author)

  20. SANDIA NATIONAL LABORATORIES IN SITU ELECTROKINETIC EXTRACTION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As a part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated the In-Situ Electrokinetic Extraction (ISEE) system at Sandia National Laboratories, Albuquerque, New Mexico.The SITE demonstration results show ...

  1. Study on commercial FBR concepts by combining innovative technologies

    International Nuclear Information System (INIS)

    Miura, M.; Inagaki, T.; Kuroha, M.; Hida, T.

    1992-01-01

    A study was conducted on future prospects of FBR commercialization. Targets of further improving safety and economy were set to make commercial power plants that would be superior to future LWRs. Promising innovative technologies studied domestically and overseas were extracted by evaluating prospects for commercialization, effect, and plant applicability. Several commercial plants were conceptualized by introducing such technology to large-scale and oxide-fuel reactors. Estimates of construction cost, etc., proved that the targets could be achieved. A concept of long-term technological development was synthesized. (author)

  2. Six phase soil heating. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    Six Phase Soil Heating (SPSH) was developed to remediate soils contaminated with volatile and semi-volatile organic compounds. SPSH is designed to enhance the removal of contaminates from the subsurface during soil vapor extraction. The innovation combines an emerging technology, six-phase electric heating, with a baseline technology, soil vapor extraction, to produce a more efficient in situ remediation systems for difficult soil and/or contaminate applications. This document describes the technology and reports on field demonstrations conducted at Savannah River and the Hanford Reservation

  3. The application of kaizen as a continuous technology innovation

    Directory of Open Access Journals (Sweden)

    Martynyuk A.V.

    2016-11-01

    Full Text Available this article describes the essence of technology Kaizen, which was developed in Japan to improve business processes with the aim of improving the quality of products, to improve production processes and the efficiency of management of the organization. In contrast to Western technology, Cirio, which involves the introduction of a radical innovation, technology Kaizen involves the development and implementation of small improvements on an ongoing basis, which ensures stable growth of the main processes of the company. The article presents the description and requirements of the five basic elements of the Kaizen system, and describes the activities of Kaizen teams.

  4. Accelerating innovation in information and communication technology for health.

    Science.gov (United States)

    Crean, Kevin W

    2010-02-01

    Around the world, inventors are creating novel information and communication technology applications and systems that can improve health for people in disparate settings. However, it is very difficult to find investment funding needed to create business models to expand and develop the prototype technologies. A comprehensive, long-term investment strategy for e-health and m-health is needed. The field of social entrepreneurship offers an integrated approach to develop needed investment models, so that innovations can reach more patients, more effectively. Specialized financing techniques and sustained support from investors can spur the expansion of mature technologies to larger markets, accelerating global health impacts.

  5. 78 FR 70963 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2013-11-27

    ... of the Technology and Innovation Committee (TIC) of the NASA Advisory Council (NAC). The meeting will... Propellant Storage and Transfer; and a discussion of barriers to innovation and innovation enablers. DATES... Barriers to Innovation and Innovation Enablers The meeting will be open to the public up to the seating...

  6. Technology Innovations from NASA's Next Generation Launch Technology Program

    Science.gov (United States)

    Cook, Stephen A.; Morris, Charles E. K., Jr.; Tyson, Richard W.

    2004-01-01

    NASA's Next Generation Launch Technology Program has been on the cutting edge of technology, improving the safety, affordability, and reliability of future space-launch-transportation systems. The array of projects focused on propulsion, airframe, and other vehicle systems. Achievements range from building miniature fuel/oxygen sensors to hot-firings of major rocket-engine systems as well as extreme thermo-mechanical testing of large-scale structures. Results to date have significantly advanced technology readiness for future space-launch systems using either airbreathing or rocket propulsion.

  7. In the Shadow of Schumpeter: W. Rupert Maclaurin and the Study of Technological Innovation

    Science.gov (United States)

    Godin, Benoit

    2008-01-01

    J. Schumpeter is a key figure, even a seminal one, on technological innovation. Most economists who study technological innovation refer to Schumpeter and his pioneering role in introducing innovation into economic studies. However, despite having brought forth the concept of innovation in economic theory, Schumpeter provided few if any analyses…

  8. Development models and technological innovation. A conservative revolution

    Directory of Open Access Journals (Sweden)

    Carla Gras

    2016-12-01

    Full Text Available In Argentina, innovations related to biotechnologies were rapidly adopted while initially there was an absence of a large social debate. To understand this absence, the institutional framework which legitimized technological innovations must be addressed. This framework was undoubtedly one of the conditions of success of the dissemination of the agribusiness model. It´s unfolding also evidences the restructuring of local rural dominant classes that led to the emergency of new social actors. These were the “innovators” gathered in the Argentine Association of No-Tilling Farmers (or AAPRESID.  Here, we analyze how innovations were introduced and legitimated in Argentina. In contrast to what AAPRESID has termed as a “paradigmatic revolution”, we will characterize the introduction of biotechnologies in Argentine agriculture as a “conservative revolution”.

  9. Innovation incentives or corrupt conflicts of interest? Moving beyond Jekyll and Hyde in regulating biomedical academic-industry relationships.

    Science.gov (United States)

    Taylor, Patrick L

    2013-01-01

    The most contentious, unresolved issue in biomedicine in the last twenty-five years has been how to best address compensated partnerships between academic researchers and the pharmaceutical industry. Law and policy deliberately promote these partnerships through intellectual property law, research funding programs, and drug and device approval pathways while simultaneously condemning them through conflict-of-interest (COI) regulations. These regulations have not been subjected to the close scrutiny that is typically utilized in administrative law to evaluate and improve regulatory systems. This Article suggests that the solution to this standoff in biomedical law and policy lies in an informed, empirical approach. Such an approach must both recognize such partnerships' legal and practical variations, as well as classify them based on their benefit to innovation and their harm to research biases. Ultimately, this approach must facilitate administrative reforms that would convert what is now an inherently arbitrary, yet widespread, regulatory regime into an epistemically rich mechanism for distinguishing between harmful and beneficial partnerships.

  10. Technology for 3D System Integration for Flexible Wireless Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Wen-Cheng Kuo

    2018-05-01

    Full Text Available This paper presents a new 3D bottom-up packing technology for integrating a chip, an induction coil, and interconnections for flexible wireless biomedical applications. Parylene was used as a flexible substrate for the bottom-up embedding of the chip, insulation layer, interconnection, and inductors to form a flexible wireless biomedical microsystem. The system can be implanted on or inside the human body. A 50-μm gold foil deposited through laser micromachining by using a picosecond laser was used as an inductor to yield a higher quality factor than that yielded by thickness-increasing methods such as the fold-and-bond method or thick-metal electroplating method at the operation frequency of 1 MHz. For system integration, parylene was used as a flexible substrate, and the contact pads and connections between the coil and chip were generated using gold deposition. The advantage of the proposed process can integrate the chip and coil vertically to generate a single biocompatible system in order to reduce required area. The proposed system entails the use of 3D integrated circuit packaging concepts to integrate the chip and coil. The results validated the feasibility of this technology.

  11. 3rd International Conference on Nanotechnologies and Biomedical Engineering

    CERN Document Server

    Tiginyanu, Ion

    2016-01-01

    This volume presents the proceedings of the 3rd International Conference on Nanotechnologies and Biomedical Engineering which was held on September 23-26, 2015 in Chisinau, Republic of Moldova. ICNBME-2015 continues the series of International Conferences in the field of nanotechnologies and biomedical engineering. It aims at bringing together scientists and engineers dealing with fundamental and applied research for reporting on the latest theoretical developments and applications involved in the fields. Topics include Nanotechnologies and nanomaterials Plasmonics and metamaterials Bio-micro/nano technologies Biomaterials Biosensors and sensors systems Biomedical instrumentation Biomedical signal processing Biomedical imaging and image processing Molecular, cellular and tissue engineering Clinical engineering, health technology management and assessment; Health informatics, e-health and telemedicine Biomedical engineering education Nuclear and radiation safety and security Innovations and technology transfer...

  12. Research on Upgrade Path to Technology Innovation of Resource-based SMEs in China

    Science.gov (United States)

    Jie, Xu

    2017-08-01

    Complexity, diversity and coordination are features of technology innovation of resource-based SMEs in China. This paper studies on the key factors of macro-environment, cooperation among enterprises and enterprise interior, which influence the upgrading of technology innovation of resource-based SMEs in China. This paper constructs integrated system of technology innovation to analyse the upgrade path to technology innovation of resource-based SMEs in China, so that enterprises would improve their technology innovation and get a new way to accomplish sustainable innovated development.

  13. INFORMATION TECHNOLOGY AS A DETERMINANT OF SMES COLLABORATION AND INNOVATIVENESS

    Directory of Open Access Journals (Sweden)

    Svetlana Cvetanovic

    2014-12-01

    Full Text Available Studies of small and medium-sized enterprise (SMEs development around the world show that the most significant factor for increasing their numbers and improving business success is the free enterprise, as exogenous, and innovation as an endogenous variable. At the same time, the dominant view in economic theory is that innovation is a key generator of changes for which the SMEs can be considered as a kind of metaphors for a successful business over the last twenty years in a number of economies. Arguing that cooperation between SMEs is increasingly common generic strategy of their development, the paper first explains the importance of collaboration to increase innovation and competitiveness, and then provides possible models using information technology such as Workflow Management Systems (WfMS, Service Oriented Architecture (SOA and Service-Oriented Cloud Computing Architecture (SOCCA to support the collaboration of these business entities. Solutions provided are aimed at improving the innovativeness of SMEs and fully follow the requirements of the so-called fifth-generation innovation process whose key attributes are integration and flexibility.

  14. Molecular medicine and concepts of disease: the ethical value of a conceptual analysis of merging biomedical technologies.

    NARCIS (Netherlands)

    Boenink, Marianne

    2009-01-01

    Although it is now generally acknowledged that new biomedical technologies often produce new definitions and sometimes even new concepts of disease, this observation is rarely used in research that anticipates potential ethical issues in emerging technologies. This article argues that it is useful

  15. Resource recycling as new field for innovative technologies

    Directory of Open Access Journals (Sweden)

    Kamenik L.L.

    2017-01-01

    Full Text Available This study substantiates the necessity of transition from the natural resource model of socioeconomic development towards an industrially reproducible type of raw material, which is particularly relevant in the context of the global resource crisis. The key role of innovative technologies in the solution to this problem is questioned. Theoretical and methodological principles of the modern economy functioning are examined based on the resource factor. A new concept of “resource recycling”, which reflects industrial resource recovery, is introduced. An innovative model of a resource base for economic reproduction is provided, the necessity of transition from the existing linear economic model towards a closed resource cycle model is shown, and three resource cycle models are examined in terms of their objectives, forms, and content. The major problems in the implementation of the innovative model and ways of solving them are defined, which makes it possible to reduce the risk of a resource provision crisis. The conclusion that resource recycling serves as a new sphere of innovative technologies is substantiated. The historical analogy method and the evolutionary systems approach are used.

  16. Technology innovation and entrepreneurial state: the development of China's high-speed rail industry

    NARCIS (Netherlands)

    Sun, Z.

    2015-01-01

    China proactively promotes indigenous technology innovation towards developing an innovation-based economy. This contradicts the developmental state literature that puts emphasis on technology imitation. Drawn from the strategic entrepreneurship perspective, this article explores the role of the

  17. 75 FR 24773 - Research and Innovative Technology Administration Advisory Council on Transportation Statistics...

    Science.gov (United States)

    2010-05-05

    ... DEPARTMENT OF TRANSPORTATION Bureau of Transportation Statistics Research and Innovative Technology Administration Advisory Council on Transportation Statistics; Notice of Meeting AGENCY: Research... Transportation, Research and Innovative Technology Administration, Bureau of Transportation Statistics, Attention...

  18. Utilities’ Technology Management of Smart Grid Innovation and Implementation

    DEFF Research Database (Denmark)

    Tambo, Torben

    2012-01-01

    To create sustainability in society’s energy system, power producers and consumers need smart grid technology to balance among producing and consuming units. Smart grid makes up a host of specifications, unproven products and concepts as well as a strong and dedicated innovation process for utility...... companies. Few proven concepts exist, and with the prolongation, smart grid represents an excellent case of technology management. The current study uses a series of loosely related technological studies of smart grid technologies in SME electricity companies to highlight and characterise critical issues....... Major findings are that the companies have limited capabilities in management of technology despite both strong push and pull, and they suffer from vaguely expressed objectives....

  19. Barriers to development and deployment of innovative waste minimization technologies

    International Nuclear Information System (INIS)

    Flores, E.A.; Donaghue, J.F.

    1994-08-01

    Increasing regulation and scrutiny is driving waste generators towards reducing the use of scarce natural resources and reducing or eliminating was streams. There is increasing emphasis on developing and deploying technologies that meet industry needs for recovering valuable materials in a cost-effective manner. At the Department of Energy's (DOE) Hanford Site, Battelle operates Pacific Northwest Laboratory (PNL). PNL's mission is to develop technologies to clean up the environment, and to assist industry in being competitive on a global scale. One such technology developed by PNL is the Waste Acid Detoxification and Reclamation (WADR) process. This technology recovers acids from metal-bearing spent solutions, separating out the metals (which are a valuable byproduct of the acid recycling operation) from the acids. WADR uses selective precipitation and distillation together in an innovative waste recycling technology. Selective precipitation removes the heavy metals, and vacuum distillation recovers clean acid. However, WADR and other innovative waste reduction technologies face numerous barriers to successful development and deployment in the field

  20. Technologically Reflective Individuals as Enablers of Social Innovation*

    Science.gov (United States)

    Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-01-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco‐challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy‐to‐administer multi‐item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co‐creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process. PMID:27134342

  1. Technologically Reflective Individuals as Enablers of Social Innovation.

    Science.gov (United States)

    Schweitzer, Fiona; Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-11-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco-challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy-to-administer multi-item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co-creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process.

  2. CONTEMPORARY DIGITAL TECHNOLOGIES AND INNOVATIONS IN HUMAN INTELLIGENCE

    Directory of Open Access Journals (Sweden)

    Riabtseva, N.K.

    2017-09-01

    Full Text Available New digital technologies not only “change language” (David Cristal, but also “upgrade” human intelligence making it perform new and uncommon operations. The present paper is an analysis and a survey of most prominent innovations in human intelligence, which are instigated by the latest digital information technologies. These innovations include, according to the point of view of outstanding specialists in contemporary digital technologies, such operations as multitasking, serendipity, connectivity, hypermodality, visuality, and cybersemiotic convergence of objective and virtual reality. The paper is based on the data presented in the publications of such outstanding “digital” specialists as Larry Rosen, Jay David Bolter, Steven Downes, Jay Lemke, Gunther Kress, Soren Brier, etc. In their works they particularly stress the impact of digital technologies and internet communication on all spheres of human activities, their role in the inner psychological and mental states, in professional and educational domain, as well as the importance of their investigation and a gap between the intensive development of digital technologies and their insufficient usage in scientific, didactic, social and cultural life. Special attention in the paper focuses on the tendency towards visualization in the global information flows and its role in information processing and knowledge transfer. The paper particularly stresses the fact that the impact of contemporary digital technologies on all spheres of human activities, including the intellectual one, needs further and profound investigation.

  3. Biology technology, and innovation in high school curriculum

    Directory of Open Access Journals (Sweden)

    Antonio Carlos Rodrigues de Amorim

    1998-01-01

    Full Text Available Based on frameworks that propose the contextualization of science education centered in the science/technology/ society relationships, and on the belief that the teacher has a fundamental role on the curriculum innovation processes, this paper describes and analyses different elements of the pedagogical practice of teachers of the city of Campinas/SP, in the perspective of outlining an overview regarding the already existing biology and technology relationship. It focuses in a detailed way the conceptions of the relationships between biology and technology present in the instructional materials used or produced by teachers, describing and discussing the wide range spectrum of identified possibilities. It also emphasizes the approaches to biology and technology relationships identified by interviewing the teachers, being them similar or not to those found in the instructional materials. Indicators of the existence of a problematic theory and practice association, in which the theoretical elements (science are hierarchically superior to the practical elements (technology, were detected. This kind of association should constitute a focus of attention in the construction of innovative proposals for the biology curriculum, since science classroom discussions regarding technology – in their ethical, aesthetical, epistemological, and marketing aspects – represent an important path to dimension the biological knowledge in the capitalist contemporary society.

  4. Oxide nanomaterials: synthetic developments, mechanistic studies, and technological innovations.

    Science.gov (United States)

    Patzke, Greta R; Zhou, Ying; Kontic, Roman; Conrad, Franziska

    2011-01-24

    Oxide nanomaterials are indispensable for nanotechnological innovations, because they combine an infinite variety of structural motifs and properties with manifold morphological features. Given that new oxide materials are almost reported on a daily basis, considerable synthetic and technological work remains to be done to fully exploit this ever increasing family of compounds for innovative nano-applications. This calls for reliable and scalable preparative approaches to oxide nanomaterials and their development remains a challenge for many complex nanostructured oxides. Oxide nanomaterials with special physicochemical features and unusual morphologies are still difficult to access by classic synthetic pathways. The limitless options for creating nano-oxide building blocks open up new technological perspectives with the potential to revolutionize areas ranging from data processing to biocatalysis. Oxide nanotechnology of the 21st century thus needs a strong interplay of preparative creativity, analytical skills, and new ideas for synergistic implementations. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Informing Early-Phase Technology Decisions in Paradigmatic Innovation

    DEFF Research Database (Denmark)

    Jensen, Ole Kjeldal; Ahmed-Kristensen, Saeema

    2010-01-01

    their knowledge-world in such a radical manner, they start facing problems with making efficient decisions as knowledge generated through experience is mainly useful when the future mimics the past, which is not the case for such radical changes. Therefore, a 3 year long research project within this industry has......The innovation activities of a company facing paradigmatic change with regard to both technology and business model includes taking many decisions, where the information available, as well as the decision makers’ ability to understand this information, is limited. Technology decisions in the very...... early phases of innovation have been explored in a Scandinavian energy-utilities company facing exactly these paradigmatic changes. In the company there are 5500 employees, with the major footprint in Denmark. The company has activities in the full energy value-chain including: production & trade of oil...

  6. DYNAPHORE, INC. FORAGER™ SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager™ Sponge is an open-celled cellulose sponge incorporating an amine-containing chelating polymer that selectively absorbs dissolved heavy metals from aqueous waste streams. The Developer states that the technology can be utilized to remove and concentrate heavy metals f...

  7. Innovation in concentrating solar power technologies: A study drawing on patent data

    OpenAIRE

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2010-01-01

    Better understanding the innovative process of renewable energy technologies is important for tackling climate change. Though concentrating solar power is receiving growing interest, innovation studies so far have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and solar thermal technologies. This study relies on patent data to examine international innovative activity in concentrating solar power technologies. Our uniqu...

  8. Energy, environment and technological innovation: Rome 2nd international congress

    International Nuclear Information System (INIS)

    1992-01-01

    From the three volumes containing the proceedings of the October 12-16, 1992 2nd International Congress on Energy, Environment and Technological Innovation held at the University of Rome 'La Sapienza', separate abstracts were prepared for 41 papers. The selection of papers included recent developments and research trends in the following high-tech areas: biomass plantations, wind turbines, photovoltaic power plants, solar architecture, building energy management, global warming, automobile air pollution abatement, district heating with cogeneration, and hydrogen fuels for transportation

  9. The Future: Innovative Technologies for Radioactive Waste Processing and Disposal

    International Nuclear Information System (INIS)

    Bychkov, Alexander V.

    2014-01-01

    Safe, proliferation resistant and economically efficient nuclear fuel cycles that minimize waste generation and environmental impacts are key to sustainable nuclear energy. Innovative approaches and technologies could significantly reduce the radiotoxicity, or the hazard posed by radioactive substances to humans, as well as the waste generated. Decreasing the waste volume, the heat load and the duration that the waste needs to be isolated from the biosphere will greatly simplify waste disposal concepts

  10. Doctor-Patient Knowledge Transfer: Innovative Technologies and Policy Implications

    OpenAIRE

    Sára, Zoltán; Csedő, Zoltán; Tóth, Tamás; Fejes, József; Pörzse, Gábor

    2013-01-01

    The aim of this study was to empirically investigate the barriers in doctor-patient communication and knowledge transfer and the role of innovative technologies in overcoming these barriers. We applied qualitative research methods. Our results show that patients extensively use information sources, primarily the Internet before the visits. Patients regularly apply a self-diagnosis regarding their diseases. This implies several risks as many of them are not able to properly inte...

  11. The high efficiency of innovative educational technologies

    Directory of Open Access Journals (Sweden)

    Dadyan Eh. G.

    2016-03-01

    Full Text Available student learning takes place as scheduled in the computer lab and at home on their own computers in thin client mode and cloud technologies. In line with the studied material discipline, students can take advantage of the cloud services. Attracting innovative methods has allowed roughly halved to intensify the process of learning material, boost academic performance (approximately 40–50% and dramatically improve motivation to study discipline.

  12. Innovations in precision seed drilling technology: successes or failures?

    Directory of Open Access Journals (Sweden)

    Johannes Benninger

    2016-06-01

    Full Text Available In view of the development of various technological alternatives in precision seed drilling, it has become a matter of research whether there are clear criteria for the success or failure of technological innovations. Around the turn to the 20th century, two very different precision seed drill methods were developed almost at the same time. Band seeding made it possible to achieve nearly perfect single grain sowing. For this purpose, individual, equally spaced seeds were embedded into bands of paper or cotton. In the field, these seed tapes were then unreeled from large drums. The pneumatic system proposed in 1897, by contrast, introduced grain singling using a vacuum for the first time. Although band seeding presented a satisfactory technological solution, it was never widely applied. Pneumatic systems, on the other hand, took long to catch on and only started to be successful in the late 1960s. Up to then, these innovative systems had to be considered as failures. Changing the period under review, however, may completely reverse the assessment of whether an innovation is a success or a failure.

  13. Sustainable Technology and Business Innovation Framework – A Comprehensive Approach

    Directory of Open Access Journals (Sweden)

    Maja Levi Jakšić

    2018-05-01

    Full Text Available Despite of the rising awareness of the urgency in finding more efficient and effective ways to achieve sustainable development, comprehensive and consistent meaning is still elusive both in theory and practice. The aim of this paper is to create a more structured theoretical framework related to macro and micro perspectives of sustainable development, relevant also to enhancing sustainable practices. We here propose a comprehensive framework model for structuring multiple sustainability principles and practices, detected in the literature as different sustainability categories related to both macro and micro perspectives of sustainability in the economy and society. The focus is on relevant sustainability principles of technology and business innovation in relation to basic technology and business innovation models as a contribution to less investigated theoretical aspects of sustainable business development. We developed a set of related matrices indicating the relevant roles and relationships between these principles in achieving sustainable business goals related to sustainable economy dimensions. Finally, the paper shows that the proposed Related Matrices Framework fulfils the main objective set in the initial research stages, i.e. to be of both theoretical and practical relevance. As a contribution to the theory it meets the need of building a structured, integrated, comprehensive model that serves the needs of better understanding different sustainability of macro and micro categories, indicating mutual relations and influences. In a practical sense, it can be used as a tool to support the management of change in companies oriented at achieving sustainable business goals based on sustainable technology and business innovation.

  14. Health technology assessment, value-based decision making, and innovation.

    Science.gov (United States)

    Henshall, Chris; Schuller, Tara

    2013-10-01

    Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.

  15. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  16. An innovation diffusion model for new mobile technologies acceptance

    Directory of Open Access Journals (Sweden)

    Barkoczia Nadi

    2017-01-01

    Full Text Available This paper aims to approach the diffusion model developed in 1960 by Frank Bass has been utilized to study the distribution of different types of new products and services. The Bass Model helps by describing the process in which new products are adopted in a market. This model is a useful tool for predicting the first purchase of an innovative product for which there are competing alternatives on the market. It also provides the innovator with information regarding the size of customers and the adoption time for the product. The second part of the paper is dedicated to a monographic study of specific conceptual correlations between the diffusion of technology and marketing management that emphasizes technological uncertainty and market uncertainty as major risks to innovative projects. In the final section, the results of empirical research conducted in Baia-Mare, Romania will be presented in a way that uses diffusion Bass model to estimate the adoption period for new mobile technologies.

  17. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

    Science.gov (United States)

    Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

    2016-01-01

    Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

  18. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

    Directory of Open Access Journals (Sweden)

    Mahesha M. Poojary

    2016-11-01

    Full Text Available Marine microalgae and seaweeds (microalgae represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield, selectivity (purity, high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

  19. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

    Science.gov (United States)

    Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

    2016-11-22

    Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

  20. Research on the Synergy Degree of China Yangtze River Delta Region Technology Innovation System Evolution from the Perspective of Technology Innovation Chain

    Directory of Open Access Journals (Sweden)

    Xu Bin Feng

    2014-08-01

    Full Text Available Abstract: This paper divides technology innovation system into research and development input subsystem, technology research and development subsystem and technology application subsystem from the perspective of technology innovation chain, combining with the system theory. Then selects the corresponding ordinal variables, makes an empirical analysis to the synergy degree of Yangtze River delta regional technology innovation system evolution by complex system synergy degree model which based on the data of 2002-2009. The results show that the development of synergy degree of the technology innovation system appears a rising trend and the technology application subsystem is the key factor of direction and degree of synergy development in the evolution process of regional technology innovation system in the Yangtze River Delta of China. Finally, this paper analyzes the characteristics and causes of synergy degree’s evolution, and puts forward the corresponding policy recommendations to different problems.

  1. 76 FR 80901 - National Medal of Technology and Innovation Nomination Evaluation Committee

    Science.gov (United States)

    2011-12-27

    ... Nation's highest honor for technological innovation, awarded annually by the President of the United... utilizing technological innovation and/or be familiar with the education, training, employment and... Management/Computing/IT/Manufacturing Innovation; Technological Manpower/Workforce Training/Education. Under...

  2. Technological Innovation and Climate Change: Where Does France Stand?

    International Nuclear Information System (INIS)

    Meniere, Yann; Glachant, Matthieu; Pot, Cecile; Le Blanc, Gilles; Dechezlepretre, Antoine; Carrere, Fabrice

    2013-01-01

    We analyse France's position on global warming mitigation technology. The methodology draws on a database describing all patents filed between 1980 and 2008 in 17 climate-related technological classes. France is the fifth largest innovator in the world, with 5.2 % of patented inventions, including 20 % from the public sector. More than half of French inventions are protected abroad, 1.5 times more than the global average. France's position is relatively weak in renewable energy, and strong in sectors marked by the presence of national industrial champions and public research organisations

  3. Technological Innovations and International Humanitarian Law: Challenges and Tensions

    Directory of Open Access Journals (Sweden)

    Eric Pomès

    2017-12-01

    Full Text Available In recent years, armed conflicts have changed in nature (civil war, ‘terrorism’ and the means used are increasingly technological (robotisation, cyberwar. Faced with these developments, some would claim International Humanitarian Law (IHL is outdated. While these technological innovations present new challenges in the application of IHL, it still constitutes a relevant legal framework for armed conflicts and the conduct of hostilities. Indeed, the flexibility of IHL allows it to adapt to contemporary conflicts. Therefore, this shows that the statements about its obsolescence are primarily political in nature.

  4. Complex engineering objects construction using Multi-D innovative technology

    International Nuclear Information System (INIS)

    Agafonov, Alexey

    2013-01-01

    Multi-D technology is an integrated innovative project management system for a construction of complex engineering objects based on a construction process simulation using an intellectual 3D model. Multi-D technology includes: • The unified schedule of E+P+C; • The schedule of loading of human resources, machines & mechanisms; • The budget of expenses and the income integrated with the schedule; • 3D model; • Multi-D model; • Weekly-daily tasks (with 4th level schedules); • Control system of interaction of Customer-EPC(m) company - Contractors; • Change and configuration management system

  5. The evolution of a company based on technological innovation. Gamesa

    International Nuclear Information System (INIS)

    Lopez Mielgo, N.

    2007-01-01

    This paper reviews the evolution of a company that has based its competitive strategy on technological innovation. Gamesa was established in 1976 and it has been continuously transforming its portfolio of businesses until it has become one of the main global operators in the field of wind turbine manufacturing. The firm was able to apply its technological capital in the emerging phase of the domestic wind energy industry. Once leadership in Spain was consolidated, Gamesa has developed an ambitious programme of sales and operational internationalisation, which has converted it in the number two producer of wind turbines worldwide. (Author)

  6. Innovative technologies for the remediation of transuranic- contaminated landfills

    International Nuclear Information System (INIS)

    Kostelnik, K.M.

    1995-01-01

    The US Department of Energy (DOE) has initiated a comprehensive research,development, demonstration, testing and evaluation program to provide innovative technology systems to achieve its environmental management responsibilities. The Office of Technology Development (OTD) is responsible for this research in support of the Offices of Environmental Restoration and Waste Management efforts. In fiscal year (FY) 1992 the OTD established the Buried Waste Integrated Demonstration (BWID). The BWID mission was to support the development of emerging technologies for their application to the remediation of DOE buried waste site. During FY95, the BWID program was transitioned into a larger program which will focus its attention to DOE Landfills and Contaminated Soils. There search and activities formerly referred to as the BWID will now be associated with the Transuranic-contaminated Arid Landfill Stabilization Program.(TALS). The TALS Program supports these buried waste remediation efforts by seeking out the best talent to solve the technology challenges as identified in baseline remediation strategies. Experts from throughout the DOE complex, universities, private sector, and the international community are being included in this program to solve these challenges and ensure implementation and commercialization of innovative technologies

  7. Biomedical and health informatics education and research at the Information Technology Institute in Egypt.

    Science.gov (United States)

    Hussein, R; Khalifa, A

    2011-01-01

    During the last decade, Egypt has experienced a revolution in the field of Information and Communication Technology (ICT) that has had a corresponding impact on the field of healthcare. Since 1993, the Information Technology Institute (ITI) has been leading the development of the Information Technology (IT) professional training and education in Egypt to produce top quality IT professionals who are considered now the backbone of the IT revolution in Egypt. For the past five years, ITI has been adopting the objective of building high caliber health professionals who can effectively serve the ever-growing information society. Academic links have been established with internationally renowned universities, e.g., Oregon Health and Science University (OHSU) in US, University of Leipzig in Germany, in addition those with the Egyptian Fellowship Board in order to enrich ITI Medical Informatics Education and Research. The ITI Biomedical and Health Informatics (BMHI) education and training programs target fresh graduates as well as life-long learners. Therefore, the program's learning objectives are framed within the context of the four specialization tracks: Healthcare Management (HCM), Biomedical Informatics Research (BMIR), Bioinformatics Professional (BIP), and Healthcare Professional (HCP). The ITI BMHI research projects tackle a wide-range of current challenges in this field, such as knowledge management in healthcare, providing tele-consultation services for diagnosis and treatment of infectious diseases for underserved regions in Egypt, and exploring the cultural and educational aspects of Nanoinformatics. Since 2006, ITI has been positively contributing to develop the discipline of BMHI in Egypt in order to support improved healthcare services.

  8. Innovative technologies - Antiquated procedures how do we romove the barriers?

    International Nuclear Information System (INIS)

    Holland, M.J.

    1994-01-01

    This paper share the author's perspective, based on her experience, on the procedural, regulatory, institutional, and human barriers limiting the progress and effectiveness of decision making in the Federal government's efforts to develop and demonstrate innovative environmental cleanup technologies. The author has drawn upon her experience as a facilitator for the DOIT Committee process, the EPA/Clean Sites Public/Private Partnership, private industry technology development and demonstration consortia, knowledge gained from facilitating workshops on regulatory and institutional barriers to technology development, and ten years experience as a Superfund attorney. Two main topics are covered in this paper, the first focuses on the use of group processes for decision-making and makes recommendations for improving the success of these processes. The second focus of this paper is on barriers to and solutions for successful development, demonstration, and commercialization of new environmental technologies

  9. En-Vac Robotic Wall Scabbler. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The U.S. Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in decontamination and decommissioning (D and D) of nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors Large-Scale Demonstration and Deployment Projects (LSDDP). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased cost of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) LSDDP generated a list of statements defining specific needs or problems where improved technology could be incorporated into ongoing D and D tasks. One of the stated needs was for a Robotic Wall Scabbler that would reduce costs and shorten schedules in DOE's Decommissioning Project. This demonstration investigated the associated costs and time required to remove paint from the Test Area North (TAN-607) Decontamination Shop walls by comparing the En-vac Robotic Wall Scabbler against the baseline technology. The baseline technologies consist of the Pentek Vac Pac System with the Pentek Rotopeen and Needle Gun hand-held attachments. This system only removes paint from the surface of concrete. Innovative Technology The En-vac Robotic Wall Scabbler is a remote-controlled scabbling unit with individually motor-controlled wheels that moves horizontally and vertically along floors, walls, and ceilings, adhering to the surface with the help of a high-vacuum suction created at its base (see Figures 1 and 2). The complete En-vac Blasting System consists of the En-vac robot, a recycling unit, a filter, and a vacuum unit, and uses an abrasive, steel-grit blasting technology for the scabbling process. By comparison, this

  10. International conference on innovative technologies for nuclear fuel cycles and nuclear power. Book of extended synopses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    A wide range of issues relevant to the innovative technologies for nuclear power cycle and nuclear power were addressed. The 7 sessions of the conference were entitled: (1) no title; (2) needs, prospects and challenges for innovation; (3) evolution of technical, social, economic and political conditions; (4) panel on challenges for the deployment of innovative technologies; (5) international programmes on innovative nuclear systems; (6) innovative nuclear systems and related R and D programmes; (7) concluding panel.

  11. Biomedical photonics handbook biomedical diagnostics

    CERN Document Server

    Vo-Dinh, Tuan

    2014-01-01

    Shaped by Quantum Theory, Technology, and the Genomics RevolutionThe integration of photonics, electronics, biomaterials, and nanotechnology holds great promise for the future of medicine. This topic has recently experienced an explosive growth due to the noninvasive or minimally invasive nature and the cost-effectiveness of photonic modalities in medical diagnostics and therapy. The second edition of the Biomedical Photonics Handbook presents fundamental developments as well as important applications of biomedical photonics of interest to scientists, engineers, manufacturers, teachers, studen

  12. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    International Nuclear Information System (INIS)

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

  13. The power of disruptive technological innovation: Transcatheter aortic valve implantation.

    Science.gov (United States)

    Berlin, David B; Davidson, Michael J; Schoen, Frederick J

    2015-11-01

    We sought to evaluate the principles of disruptive innovation, defined as technology innovation that fundamentally shifts performance and utility metrics, as applied to transcatheter aortic valve implantation (TAVI). In particular, we considered implantation procedure, device design, cost, and patient population. Generally cheaper and lower performing, classical disruptive innovations are first commercialized in insignificant markets, promise lower margins, and often parasitize existing usage, representing unattractive investments for established market participants. However, despite presently high unit cost, TAVI is less invasive, treats a "new," generally high risk, patient population, and is generally done by a multidisciplinary integrated heart team. Moreover, at least in the short-term TAVI has not been lower-performing than open surgical aortic valve replacement in high-risk patients. We conclude that TAVI extends the paradigm of disruptive innovation and represents an attractive commercial opportunity space. Moreover, should the long-term performance and durability of TAVI approach that of conventional prostheses, TAVI will be an increasingly attractive commercial opportunity. © 2014 Wiley Periodicals, Inc.

  14. Innovative uses of technology in online midwifery education.

    Science.gov (United States)

    Arbour, Megan W; Nypaver, Cynthia F; Wika, Judith C

    2015-01-01

    Women's health care in the United States is at a critical juncture. There is increased demand for primary care providers, including women's health specialists such as certified nurse-midwives/certified midwives, women's health nurse practitioners, and obstetrician-gynecologists, yet shortages in numbers of these providers are expected. This deficit in the number of women's health care providers could have adverse consequences for women and their newborns when women have to travel long distances to access maternity health care. Online education using innovative technologies and evidence-based teaching and learning strategies have the potential to increase the number of health care providers in several disciplines, including midwifery. This article reviews 3 innovative uses of online platforms for midwifery education: virtual classrooms, unfolding case studies, and online return demonstrations of clinical skills. These examples of innovative teaching strategies can promote critical and creative thinking and enhance competence in skills. Their use in online education can help enhance the student experience. More students, including those who live in rural and underserved regions and who otherwise might be unable to attend a traditional onsite campus, are provided the opportunity to complete quality midwifery education through online programs, which in turn may help expand the women's health care provider workforce. This article is part of a special series of articles that address midwifery innovations in clinical practice, education, interprofessional collaboration, health policy, and global health. © 2015 by the American College of Nurse-Midwives.

  15. Innovation and communicative action: health management networks and technologies.

    Science.gov (United States)

    Rivera, Francisco Javier Uribe; Artmann, Elizabeth

    2016-11-03

    This article discusses elements of a theory of innovation from the perspective of innovation networks and social construction of technology, based on Habermas' Theory of Communicative Action and authors from the Sociology of Innovation. Based on the theoretical framework of the communicative production of scientific facts, we focus on innovation management as a basic dimension that must meet some organizational and methodological requirements in order to power its results. We present and discuss instruments such as Situational Planning, Prospective Analysis, Strategic Portfolio Management, and Networks Management that can help deal with the challenge of innovation and exploration of the future. We conclude that network organizational formats centered on reflexivity of interdisciplinary groups and planning approaches that encourage innovation criteria in assessing the attractiveness of activities and that help anticipate forms of innovation through systematic prospective analysis can potentiate the process of generating innovation as a product of networks. Resumo: No artigo são discutidos elementos de uma teoria da inovação numa perspectiva de redes de inovação e de construção social da tecnologia, a partir da Teoria do Agir Comunicativo de Habermas e de autores da Sociologia da Inovação. Com base no marco teórico da produção comunicativa de fatos científicos, focamos a gestão da inovação como uma dimensão fundamental que deve contemplar alguns requisitos, tanto de natureza organizacional quanto metodológica, para potencializar seus resultados. Apresentamos e discutimos instrumentos como o Planejamento Situacional, a Análise Prospectiva, a Gestão Estratégica de Portfólios e a Gestão de Redes que podem contribuir para o desafio da inovação e exploração do futuro. Conclui-se que formas organizativas em rede, centradas na reflexividade de grupos interdisciplinares, e enfoques de planejamento que estimulem o uso de critérios de inovação na

  16. Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

    International Nuclear Information System (INIS)

    Kruse, Juergen; Wetzel, Heike; Koeln Univ.

    2014-01-01

    We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

  17. Technological innovations in the development of cardiovascular clinical information systems.

    Science.gov (United States)

    Hsieh, Nan-Chen; Chang, Chung-Yi; Lee, Kuo-Chen; Chen, Jeen-Chen; Chan, Chien-Hui

    2012-04-01

    Recent studies have shown that computerized clinical case management and decision support systems can be used to assist surgeons in the diagnosis of disease, optimize surgical operation, aid in drug therapy and decrease the cost of medical treatment. Therefore, medical informatics has become an extensive field of research and many of these approaches have demonstrated potential value for improving medical quality. The aim of this study was to develop a web-based cardiovascular clinical information system (CIS) based on innovative techniques, such as electronic medical records, electronic registries and automatic feature surveillance schemes, to provide effective tools and support for clinical care, decision-making, biomedical research and training activities. The CIS developed for this study contained monitoring, surveillance and model construction functions. The monitoring layer function provided a visual user interface. At the surveillance and model construction layers, we explored the application of model construction and intelligent prognosis to aid in making preoperative and postoperative predictions. With the use of the CIS, surgeons can provide reasonable conclusions and explanations in uncertain environments.

  18. Public participation in the evaluation of innovative environmental cleanup technology

    International Nuclear Information System (INIS)

    Peterson, T.; McCabe, G.; Serie, P.; Niesen, K.

    1994-08-01

    Technologies for remediation of contamination are urgently needed to clean up US Department of Energy (DOE) sites across the country. DOE is managing a national program to develop, demonstrate, and deploy new technologies with promise to expedite this cleanup. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is one such effort. Time and resources, however, are too limited to be invested in methods of remediation that will never be deployed because they have not been rigorously evaluated or because they face the withering opposition of stakeholders. Therefore the VOC-Arid ID is assessing technology both in terms of its technical effectiveness and its stakeholder acceptability. Only if a technology performs as required and is acceptable to regulators, users of technology, and the public will the VOC-Arid ID recommend its use. What distinguishes public involvement in the VOC-Arid ID is the direct influence stakeholders have on the design of technology demonstrations by working directly with technology developers. Stakeholders participated in defining the criteria with which innovative environmental cleanup technology is being evaluated. The integrated demonstration is committed to providing stakeholders with the information they've indicated they need to reach reasoned judgments about the use of specific cleanup technologies. A guiding principle of the VOC-Arid ID is that stakeholder participation improves the technologies being developed, enhances the acceptance of the technologies, and will lead to the broad and timely deployment of appropriate and effective methods of environmental remediation. The VOC-Arid ID has involved stakeholders from the host demonstration site, Hanford, Washington, and from other and sites where the ID technologies may be deployed

  19. Biomedical engineering and nanotechnology

    International Nuclear Information System (INIS)

    Pawar, S.H.; Khyalappa, R.J.; Yakhmi, J.V.

    2009-01-01

    This book is predominantly a compilation of papers presented in the conference which is focused on the development in biomedical materials, biomedical devises and instrumentation, biomedical effects of electromagnetic radiation, electrotherapy, radiotherapy, biosensors, biotechnology, bioengineering, tissue engineering, clinical engineering and surgical planning, medical imaging, hospital system management, biomedical education, biomedical industry and society, bioinformatics, structured nanomaterial for biomedical application, nano-composites, nano-medicine, synthesis of nanomaterial, nano science and technology development. The papers presented herein contain the scientific substance to suffice the academic directivity of the researchers from the field of biomedicine, biomedical engineering, material science and nanotechnology. Papers relevant to INIS are indexed separately

  20. Negotiating sustainable innovation? Hydrogen and fuel cell technologies in Germany

    Directory of Open Access Journals (Sweden)

    Weert Canzler

    2013-06-01

    Full Text Available Recently, the German Federal Government made the consequential decision to change its energy program. This not only as a result of the decision to shut down the existing nuclear power plants within the next few years, but also due to vital challenges like climate change and security of energy supply. The shift in the energy-technology paradigm from fossil fuel technologies to regenerative energies might appear as a merely technical process at first glance. Yet, the road to environmental sustainability is paved with economic and social stumbling blocks. The concept of sustainable development is not a blueprint for technical progress but requires deliberations on questions about innovations and governance: How do we want to live and how do we want to get there? This paper traces the negotiations of sustainable innovation on the example of hydrogen and fuel cell technologies in Germany. The institutional set up in this field is analyzed and the new organizational actors are identified. These actors attempt to inform and persuade others of the benefits of hydrogen and fuel cells in order to establish a common view that is to guide the further development. However, while they succeeded in mobilizing enough actors to launch the largest Public Private Partnership in this sector in the EU, they could not attain the leadership in the public discourse on these technologies. It seems that an attractive guiding vision of a sustainable, post-fossil energy future and a broad acceptance in daily use would have been major prerequisites for such leadership.

  1. Teaching technological innovation and entrepreneurship in polymeric biomaterials.

    Science.gov (United States)

    Washburn, Newell R

    2011-01-01

    A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students' grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. Copyright © 2010 Wiley Periodicals, Inc.

  2. Holding a candle to innovation in concentrating solar power technologies: A study drawing on patent data

    International Nuclear Information System (INIS)

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2011-01-01

    Improved understanding of the innovative pathways of renewable energy technologies is vital if we are to make the transition to a low carbon economy. This study presents new evidence on innovation and industry dynamics in concentrating solar power (CSP) technologies. Though CSP is undergoing a renaissance, existing innovation studies have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and CSP technologies. This study, based on patent data, examines the level and dynamics of innovative activity in CSP between 1978 and 2004. Our unique contribution, based on engineering expertise and detailed datawork, is a classification system mapping CSP technologies to the International Patent Classification (IPC) system. The innovation performance of CSP is found to be surprisingly weak compared to the patent boom in other green technologies. Performance was strong around 1980 before falling dramatically, and has only recently begun to show signs of recovery. Innovation and R and D are concentrated in high-tech countries; the US, Germany and Japan, which do not necessarily have high domestic CSP potential. Large CSP potential is, therefore, not a sufficient condition for innovation. Innovators must possess economic and scientific capabilities. - Research highlights: → We develop a new classification system which allows us to map innovation in CSP technologies to the International Patent Classification System. → Evidence of innovation patterns in concentrating solar power technologies is presented. → Innovation performance in CSP is surprisingly weak compared to patenting in other green technologies, despite its strong potential as a low carbon power generation technology.

  3. Technological Determinism and Permissionless Innovation as Technocratic Governing Mentalities: Psychocultural Barriers to the Democratization of Technology

    Directory of Open Access Journals (Sweden)

    Taylor Dotson

    2015-12-01

    Full Text Available Despite no shortage of thoughtful analysis concerning how to more democratically develop and assess new technologies, practical progress toward democratized innovation has been paltry. This state of affairs suggests that the barriers to such democratic ends merit more attention. Building upon calls to more seriously examine citizens’ understandings of technology as autonomous or deterministic, this paper characterizes the assumptions, beliefs, and patterns of thought undergirding technological determinism and permissionless innovation as technocratic governing mentalities. That is, they contribute to the biasing of political discourses, practices, and organizations toward non-decision making and adaptation with regards to technological change. Indeed, permissionless innovation is quickly becoming the motto of those aiming to legitimate a “hands-off” approach to the sociotechnical “disruptions” sought by Silicon Valley entrepreneurs. Moreover, this paper explores how STS, as both an academic and political endeavor, might better respond to the challenges these modes of thinking present. Drawing upon relevant work within social psychology and communications, several fruitful avenues for engaged research regarding undermining technocratic governing mentalities become apparent. Not only is there a pressing need for accessible and parsimonious counternarratives to technological determinism and permissionless innovation but also rhetorical strategies for making the democratization of technological appear continuous with aspects of status quo systems. Finally, given that technocratic governing mentalities are likely to have practical and material roots, inquiry should be directed toward understanding how different sociotechnical arrangements impact citizens’ perception of the desirability and feasibility of democratizing technology.

  4. Theoretical and technological building blocks for an innovation accelerator

    Science.gov (United States)

    van Harmelen, F.; Kampis, G.; Börner, K.; van den Besselaar, P.; Schultes, E.; Goble, C.; Groth, P.; Mons, B.; Anderson, S.; Decker, S.; Hayes, C.; Buecheler, T.; Helbing, D.

    2012-11-01

    Modern science is a main driver of technological innovation. The efficiency of the scientific system is of key importance to ensure the competitiveness of a nation or region. However, the scientific system that we use today was devised centuries ago and is inadequate for our current ICT-based society: the peer review system encourages conservatism, journal publications are monolithic and slow, data is often not available to other scientists, and the independent validation of results is limited. The resulting scientific process is hence slow and sloppy. Building on the Innovation Accelerator paper by Helbing and Balietti [1], this paper takes the initial global vision and reviews the theoretical and technological building blocks that can be used for implementing an innovation (in first place: science) accelerator platform driven by re-imagining the science system. The envisioned platform would rest on four pillars: (i) Redesign the incentive scheme to reduce behavior such as conservatism, herding and hyping; (ii) Advance scientific publications by breaking up the monolithic paper unit and introducing other building blocks such as data, tools, experiment workflows, resources; (iii) Use machine readable semantics for publications, debate structures, provenance etc. in order to include the computer as a partner in the scientific process, and (iv) Build an online platform for collaboration, including a network of trust and reputation among the different types of stakeholders in the scientific system: scientists, educators, funding agencies, policy makers, students and industrial innovators among others. Any such improvements to the scientific system must support the entire scientific process (unlike current tools that chop up the scientific process into disconnected pieces), must facilitate and encourage collaboration and interdisciplinarity (again unlike current tools), must facilitate the inclusion of intelligent computing in the scientific process, must facilitate

  5. Digital innovations and emerging technologies for enhanced recovery programmes

    DEFF Research Database (Denmark)

    Michard, F; Gan, T J; Kehlet, H

    2017-01-01

    Enhanced recovery programmes (ERPs) are increasingly used to improve post-surgical recovery. However, compliance to various components of ERPs-a key determinant of success-remains sub-optimal. Emerging technologies have the potential to help patients and caregivers to improve compliance with ERPs...... of the above-mentioned ERP elements is omitted during the surgical journey.By optimizing compliance to the multiple components of ERPs, digital innovations, non-invasive techniques and wearable sensors have the potential to magnify the clinical and economic benefits of ERPs. Among the growing number...... of technical innovations, studies are needed to clarify which tools and solutions have real clinical value and are cost-effective....

  6. Innovative applications of technology for nuclear power plant productivity improvements

    International Nuclear Information System (INIS)

    Naser, J. A.

    2012-01-01

    The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

  7. Technological innovations in tissue removal during rhinologic surgery.

    Science.gov (United States)

    Sindwani, Raj; Manz, Ryan

    2012-01-01

    The modern rhinologist has a wide variety of technological innovations at his/her disposal for the removal of soft tissue and bone during endoscopic surgery. We identified and critically evaluated four leading tissue removal technologies that have impacted, or are poised to impact, rhinological surgery. A literature review was conducted. Technological functions, strengths and limitations of microdebriders, radio frequency ablation, endoscopic drills, and ultrasonic aspirators were explored. The primary drawback of powered instruments continues to be the higher costs associated with their use, and their main advantage is the ability to accomplish multiple functions such as tissue removal, suction, and irrigation, all with one tool. The effective and safe use of any powered instrument requires an intimate understanding of its function, capabilities, and limitations. Powered instrumentation continues to play a significant and evolving role in soft tissue and bone removal during rhinologic surgery.

  8. [Technological innovations in radiation oncology require specific quality controls].

    Science.gov (United States)

    Lenaerts, E; Mathot, M

    2014-01-01

    During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

  9. Innovation, technology transfer and development: the spin-off companies

    Directory of Open Access Journals (Sweden)

    Teodoro Valente

    2014-05-01

    Full Text Available The article starts from the identification of the reasons why Italy is less prone to technology transfer than other countries, and indicates some key issues for the diffusion of technological innovations and the development of human capital. In particular, technology transfer is not a generic form of exploitation of outcome of the research, it involves specific actions that have impact on economic production, such as the patenting and the creation of new companies (spin-offs. The author discusses the various forms of spin-offs of university research, the evolution of the phenomenon in the structures of the uni- versities, the stages of development of a spin-off company and the current fund- ing arrangements and to be promoted.

  10. The private-public cooperation in innovation trough technology centres

    International Nuclear Information System (INIS)

    Callejon, M.; Barge-Gil, A.; Lopez, A.

    2007-01-01

    The Technology Centres (TCS) are important suppliers of technology for Spanish firms. The objective of this paper is to improve the knowledge about Spanish TCS. Firstly, we present the main characteristics and the evolution of the Spanish TCS. The second question examined refers to the great heterogeneity of this kind of agents. In this sense, we present a cluster analysis using two basic characteristics of the TCS: services to firms and technological strength. Thirdly, we analyze the adjustment of the TCS to the National Innovation System and their foreseeable evolution as basic agents of this system. Finally, we summarize the programs of public support for TCS started up by the Ministry of Industry, Tourism and Trade. (Author) 11 refs

  11. Business models for maximising the diffusion of technological innovations for climate-smart agriculture

    NARCIS (Netherlands)

    Long, T.B.; Blok, V.; Poldner, Kim

    2017-01-01

    r, CSA technological innovation diffusion is subject to socio-economic barriers. The success of innovations is partly dependent on the business models that are used to diffuse them. Within the context of innovations for CSA, the role that innovation providers’ business models play in the successful

  12. Renewable energy-driven innovative energy-efficient desalination technologies

    International Nuclear Information System (INIS)

    Ghaffour, Noreddine; Lattemann, Sabine; Missimer, Thomas; Ng, Kim Choon; Sinha, Shahnawaz; Amy, Gary

    2014-01-01

    Highlights: • Renewable energy-driven desalination technologies are highlighted. • Solar, geothermal, and wind energy sources were explored. • An innovative hybrid approach (combined solar–geothermal) has also been explored. • Innovative desalination technologies developed by our group are discussed. • Climate change and GHG emissions from desalination are also discussed. - Abstract: Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m 3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3–4 kW h e /m 3 ). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h e /m 3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source

  13. Strategic thinking as a tool for technological innovation in smes

    Directory of Open Access Journals (Sweden)

    Darcy Luz Mendoza

    2016-11-01

    Full Text Available The present study aims to design strategies that allow smes to watch from one strategic thinking technological innovation, in order to meet the financial core objective to grow and be competitive in the market. The article illustrates how smes can get enterprise development from a planned technological innovation from its institutional philosophy, it imposes a challenge for these companies, the establishment of an action plan and building articulated development scenarios involve and benefit all stakeholders generating competitive advantages. The study was conducted using a survey of 95 businesses in La Guajira department, having as strategy exposed by Daft (2005 who finds that competitive strategy is about being different, select a number of different activities that other been selected to offer a unique mix of value. The research results suggest that smes do not have a department that demonstrates technological structure that have made a process for the development and successful commercialization of new or improved products, either that these companies think the strategies from its institutional philosophy, putting into practice the strategic thinking.

  14. Innovative technologies for the treatment of hazardous and mixed wastes

    International Nuclear Information System (INIS)

    Eyman, L.D.; Anderson, T.D.

    1988-01-01

    The treatment, storage, and disposal of hazardous and mixed wastes incur significant costs for Department of Energy (DOE) installations. These wastes must be managed under strict environmental controls and regulations to prevent the possibility of migration of hazardous materials to the biosphere. Through the Hazardous Waste Remedial Actions Program, the DOE is seeking to develop innovative ways of improving current treatment technologies to eliminate the hazardous components of wastes, reduce waste management costs, and minimize the volume requiring disposal as hazardous or mixed waste. Sponsored projects progress from research and development to field demonstration. Among the innovative technologies under development are supercritical water oxidation of hazardous chemicals, microwave-assisted destruction of chlorinated hydrocarbons, paramagnetic separation of metals from waste, detoxification and reclamation of waste acid, nitrate destruction through calcination, treatment/disposal of reactive metals, and methodologies for encapsulation. Technologies at a demonstration phase include detoxification of mixed waste sludge, microbial degradation of polychlorinated biphenyls in soil, and the remediation process for a hydrocarbon spill. 14 refs

  15. Innovative fossil fuel fired vitrification technology for soil remediation

    International Nuclear Information System (INIS)

    1993-08-01

    Vortex has successfully completed Phase 1 of the ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation'' program with the Department of Energy (DOE) Morgantown Energy Technology Center (METC). The Combustion and Melting System (CMS) has processed 7000 pounds of material representative of contaminated soil that is found at DOE sites. The soil was spiked with Resource Conversation and Recovery Act (RCRA) metals surrogates, an organic contaminant, and a surrogate radionuclide. The samples taken during the tests confirmed that virtually all of the radionuclide was retained in the glass and that it did not leach to the environment. The organic contaminant, anthracene, was destroyed during the test with a Destruction and Removal Efficiency (DRE) of at least 99.99%. RCRA metal surrogates, that were in the vitrified product, were retained and will not leach to the environment--as confirmed by the TCLP testing. Semi-volatile RCRA metal surrogates were captured by the Air Pollution Control (APC) system, and data on the amount of metal oxide particulate and the chemical composition of the particulate were established for use in the Phase 2 APC system design. This topical report will present a summary of the activities conducted during Phase 1 of the ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation'' program. The report includes the detail technical data generated during the experimental program and the design and cost data for the preliminary Phase 2 plant

  16. Report on the Results of the 1988 Survey of Former Biomedical Engineering Technology Students. Research Report Number 56.

    Science.gov (United States)

    Livieratos, Barbara B.

    In spring 1988, a telephone survey was conducted of students who had been enrolled in Howard Community College's (HCC's) Biomedical Engineering Technology (BMET) program between 1972 and 1987. The study sought to gather information for future student recruitment and program planning efforts. Responses were obtained from 43 (35%) of a potential…

  17. Innovation in industry and the diffusion of technology.

    Science.gov (United States)

    Utterback, J M

    1974-02-15

    The varied definitions used in the sources that have been discussed make any aggregate analysis difficult. A simple three-stage analysis of flows to, from, and within the firm was used to facilitate comparisons. Even so, each of the generalizations is drawn from relatively small and unrepresentative samples. Case studies may continue to be a source of ideas and hypotheses for further research, but do not appear to offer a means for deeper understanding of the innovation process. The retrospective nature of nearly all of the sources discussed probably means that the process has been viewed as much more rational and well-ordered than it is in fact. This failing is partially overcome in firsthand accounts such as those of Suites and Bueche (63) and Frey and Goldman (64). Each of these accounts involves a successful innovation according to technical or commercial criteria, or both. However, many of the characteristics of innovations that have failed commercially (10) appear to be similar to those of successful cases. The few longitudinal studies, and studies comparing more and less successful cases, do support the main conclusions drawn above (10, 32, 38). More serious problems are raised by the distinctly nonrepresentative nature of the samples used. There are few cases (17, 33, 65) in which the contributions of more than one organization, or details of interactions over a significant period of time, are discussed. There is a wide variation in the importance of the innovations included, ranging from those affecting the economy as a whole to cases involving production in a single firm, albeit with significant commercial results (66). In addition to questions of comparability and sampling, a central problem for further research on innovation will be to devise an operational model to account for interfirm and interindustry differences. Polar definitions used in past studies, "high technology" and "mature industry," for example, are insufficient. One possibility is to use

  18. Portable x-ray fluorescence spectrometer. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    This report describes the application of portable X-ray fluorescence (XRF) spectrometry to characterize materials related to deactivation and decommissioning (D and D) of contaminated facilities. Two portable XRF instruments manufactured by TN Spectrace were used in a technology evaluation as part of the Large-Scale Demonstration Project (LSDP) held at the Chicago Pile-5 Research Reactor (CP-5) located at Argonne National Laboratory (ANL). The LSDP is sponsored by the US Department of Energy (DOE), Office of Science and Technology, Deactivation and Decommissioning Focus Are (DDFA). The objective of the LSDP is to demonstrate innovative technologies or technology applications potentially beneficial to the D and D of contaminated facilities. The portable XRF technology offers several potential benefits for rapid characterization of facility components and contaminants, including significant cost reduction, fast turnaround time,a nd virtually no secondary waste. Field work for the demonstration of the portable XRF technology was performed from August 28--September 3, 1996 and October 30--December 13, 1996

  19. [Technological convergence will quickly generate disruptive innovations in oncology].

    Science.gov (United States)

    Coucke, Ph A

    2016-06-01

    Convergence between information and communication technology and recent developments in medical care will totally change the health care sector. The way we perform diagnosis, treatment and follow-up will undergo disruptive changes in a very near future. We intend to highlight this statement by a limited selection of examples of radical innovations, especially in the field of oncology. To be totally disruptive and to illustrate the concept of "lateral power" - especially cognitive distribution - the list of references is only made up of internet links. Anyone - patients included - can easily and instantly access to this information everywhere.

  20. Innovative intelligent technology of distance learning for visually impaired people

    Science.gov (United States)

    Samigulina, Galina; Shayakhmetova, Assem; Nuysuppov, Adlet

    2017-12-01

    The aim of the study is to develop innovative intelligent technology and information systems of distance education for people with impaired vision (PIV). To solve this problem a comprehensive approach has been proposed, which consists in the aggregate of the application of artificial intelligence methods and statistical analysis. Creating an accessible learning environment, identifying the intellectual, physiological, psychophysiological characteristics of perception and information awareness by this category of people is based on cognitive approach. On the basis of fuzzy logic the individually-oriented learning path of PIV is con- structed with the aim of obtaining high-quality engineering education with modern equipment in the joint use laboratories.