WorldWideScience

Sample records for biology technical progress

  1. Molecular biological enhancement of coal biodesulfurization. Ninth quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Baker, B.; Palmer, D.T.; Fry, I.J.; Tranuero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravanty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1991-09-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotropic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  2. Molecular biological enhancement of coal desulfurization. Eleventh quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D. Jr.; Baker, B.; Palmer, D.T.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravarty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1991-03-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of the organism; transfer this pathway into a fast-growing chemolithotrophic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  3. Molecular biological enhancement of coal biodesulfurization. Tenth quarterly technical progress report, [September--December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D.; Baker, B.; Palmer, D.T.; Fry, I.J.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravanty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1991-12-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The specific technical objectives of the project are to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotrophic bacterium; and conduct a batch-mode optimization/analysis of scale-up variables.

  4. Molecular biological enhancement of coal biodesulfurization. Fourth quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Fry, I.; Wyza, R.E.; Palmer, D.T.; Zupancic, T.J.; Conkle, H.N.

    1990-06-14

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotropic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  5. Molecular biological enhancement of coal biodesulfurization. Eleventh quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D. Jr.; Baker, B.; Palmer, D.T.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravarty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1992-03-13

    The objective of this project is to produce one or more microorganisms capable of the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: (1) clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; (2) return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; (3) transfer this pathway into a fast-growing chemolithotrophic bacterium; (4) conduct a batch-mode optimization/analysis of scale-up variables. By letter of September 3, 1991, from the Project Manager at Department of Energy, Pittsburgh Energy Technology Center, these objectives of this project were redirected toward finding and developing suitable vectors for Thiobacillus strains. All work on bacterial strains from Lehigh University was terminated since they did not contain desulfurization traits represented by the ``4S`` pathway.

  6. Quarterly Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Ayman I. Hawari

    2002-12-30

    This report presents the progress made during the first quarter of phase 2 for the project entitled ''Development and Validation of Thermal Neutron Scattering Laws from Applications and Safety Implications in Generation IV Reactor Designs.'' (B204) THIS IS NOT A FINAL REPORT

  7. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This report summarizes experimental and theoretical work in basic nuclear physics carried out between October 1, 1995, the closing of our last Progress Report, and September 30, 1996 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contracts DE-FG03-93ER-40774 and DE-FG03-95ER-40913 with the United States Department of Energy. The experimental contract supports broadly-based experimental research in intermediate energy nuclear physics. This report includes results from studies of Elementary Systems involving the study of the structure of the nucleon via polarized high-energy positron scattering (the HERMES experiment) and lower energy pion scattering from both polarized and unpolarized nucleon targets. Results from pion- and kaon-induced reactions in a variety of nuclear systems are reported under the section heading Meson Reactions; the impact of these and other results on understanding the nucleus is presented in the Nuclear Structure section. In addition, new results from scattering of high-energy electrons (from CEBAF/TJNAF) and pions (from KEK) from a broad range of nuclei are reported in the section on Incoherent Reactions. Finally, the development and performance of detectors produced by the laboratory are described in the section titled Instrumentation.

  8. Technical progress report of biological research on the volcanic island, Surtsey, and environment for the year 1975

    Energy Technology Data Exchange (ETDEWEB)

    Fridriksson, S.

    1975-01-01

    The study involves terrestrial biological research on the volcanic island, Surtsey, off the coast of Iceland and the neighboring islands and environs of the Westman Islands, which are situated on the mid-Atlantic Ridge.

  9. Technical progress report of biological research on the Volcanic Island Surtsey and its environs for the period 1965--1978

    Energy Technology Data Exchange (ETDEWEB)

    Fridriksson, S.

    1978-01-01

    Progress is reported on the following research projects: changes in shoreline and surface of the island due to volcanic activity; colonization of microorganisms, algae, lichens, and vascular plants; introduction of insects and other arthropods by wind, water, and man; transport of invertebrates to the island by flotsam of the sea; species and nesting habits of birds on the island; behavior of seals on beaches of the island; and future trends of Surtsey ecosystems. (HLW)

  10. Molluscs and echinoderms aquaculture: biological aspects, current status, technical progress and future perspectives for the most promising species in Italy

    Directory of Open Access Journals (Sweden)

    Antonio Pais

    2012-10-01

    Full Text Available Shellfish aquaculture is a widespread activity in the Italian peninsula. However, only two bivalve species are mainly cultured along the coastline of that country: the Mediterranean mussel Mytilus galloprovincialis and the Manila clam Venerupis philippinarum (Ruditapes philippinarum. By contrast, just a few other mollusc species of commercial interest are scarcely reared at a small-scale level. After analysing the current status of Italian shellfish production, this paper reports and discusses the potential for culturing several different invertebrate species [i.e., the European flat oyster Ostrea edulis, the grooved carpet shell Venerupis decussata (Ruditapes decussatus, the razor clams Ensis minor and Solen marginatus, the cephalopod Octopus vulgaris, and the purple sea urchin Paracentrotus lividus] in this country. In addition, a detailed overview of the progress made in aquacultural techniques for these species in the Mediterranean basin is presented, highlighting the most relevant bottlenecks and the way forward to shift from the experimental to the aquaculture phase. Finally, an outlook of the main economic and environmental benefits arising from these shellfish culture practices is also given.

  11. Synthetic biology and the technicity of biofuels.

    Science.gov (United States)

    Mackenzie, Adrian

    2013-06-01

    The principal existing real-world application of synthetic biology is biofuels. Several 'next generation biofuel' companies-Synthetic Genomics, Amyris and Joule Unlimited Technologies-claim to be using synthetic biology to make biofuels. The irony of this is that highly advanced science and engineering serves the very mundane and familiar realm of transport. Despite their rather prosaic nature, biofuels could offer an interesting way to highlight the novelty of synthetic biology from several angles at once. Drawing on the French philosopher of technology and biology Gilbert Simondon, we can understand biofuels as technical objects whose genesis involves processes of concretisation that negotiate between heterogeneous geographical, biological, technical, scientific and commercial realities. Simondon's notion of technicity, the degree of concretisation of a technical object, usefully conceptualises this relationality. Viewed in terms of technicity, we might understand better how technical entities, elements, and ensembles are coming into being in the name of synthetic biology. The broader argument here is that when we seek to identify the newness of disciplines, their newness might be less epistemic and more logistic. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  12. Technical progress in pipeline design and construction

    Energy Technology Data Exchange (ETDEWEB)

    Hausken, K.B.

    1995-12-31

    This paper considers the technical progress in offshore pipeline construction with limitation to some general subjects covering pipeline design, installation and start-up. In future the use of limit state pipeline design philosophy, may be implemented as an alternative to the stress based design commonly used to day giving a potential for further optimisation of the pipeline design and consequently reduction of the initial investment. Comprehensive research and development efforts in Norway in the second half of the 1970`s, made it technically feasible to cross the deep water Norwegian Trench in the 1980`s. In addition, the development of several offshore pipeline systems until to day including gas distribution systems to the European continent, have brought Norway to the forefront of technical expertise

  13. Preliminary study of the behavioral and biological effects of high intensity 60 Hz electric fields. Quarterly technical progress report, No. 1. [Development and testing of experimental protocols and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The major objective of this preliminary study is to develop and thoroughly test the experimental protocols and apparatus, which are planned for a major study of the behavioral and biological effects of high intensity 60 Hz electric fields. The behavior of baboons will be observed before, during, and after exposure to 60 Hz electric fields at a maximum intensity of 60 kV/m. Both individual performance (operant conditioning) and social behavior will be examined. The preliminary study will differ from the planned major study as follows: subjects will be used as their own controls; a smaller number of subjects will be run; field intensity will not be varied; the electric field should be non-uniform; the preliminary study exposure facility will be basically an outdoor facility; to avoid deterioration of plastic materials, the high intensity fields will not be turned on during or just after rainfall; and in the preliminary study the biological work will be restricted to the clinical determination of the health of subjects before and after exposure. The present report is the first of three quarterly technical progress reports. It covers approximately the first two and one-half months of activity and, therefore, consists primarily of plans. The report addresses four major areas: the high intensity field exposure facility; the field measurement instrumentation; the operation conditioning equipment; and experimental methods including experimental design and data analysis.

  14. Technical Progresses of Novel Simultaneous Biological Sulfide and Nitrate Removal%新型生物脱氮除硫工艺研究进展

    Institute of Scientific and Technical Information of China (English)

    蔡靖; 郑平

    2011-01-01

    Some bacteria such as Thiobacillus denitrificans can use sulfide as electron donor and nitrate as electron acceptor. Based on the biological reaction, the simultaneous biological sulfide and nitrate removal process has been developed recently, which can accomplish desulfurization and denitrification at the same time. This paper discussed the development, mechanism and key influencing factors of the simultaneous biological sulfide and nitrate removal process, in order to promote its application and extention.%同步生物脱氮除硫过程是以硫化物为电子供体、硝酸盐为电子受体的生物反应,以此为基础研发的新型生物脱氮除硫工艺,可实现对氮硫两种污染物的同时去除,在环境工程上具有重大应用价值.本文综述了同步生物脱氮除硫工艺的发展概况、原理及其主要影响因素,并展望了该工艺的应用前景.

  15. Preliminary study of the behavioral and biological effects of high intensity 60 HZ electric fields. Interim technical progress report No. 4

    Energy Technology Data Exchange (ETDEWEB)

    Feldstone, C.; Spiegel, R.J.; Winters, W.; Polonis, J.J.

    1980-03-01

    Progress is reported in studies of the effects of high intensity 60 Hz electric fields on baboon behavior - both individual performance (operant conditioning) and natural (social) behavior. The result of the study should be either a clear indication of the electric field intensity which produces deleterious effects in the baboon or an indication that the highest field intensity of practical interest (analogous to the highest intensity that can be encountered by man under power lines) produces no deleterious effects. The generalization of results to man will be futher aided by the development of models relating the physical effects of electric fields on man to the physical effects on the baboon. (LCL)

  16. Technical progress report of biological research on the Volcanic Island Surtsey and environment for the year 1976. [Recovery of terrestrial ecosystem on volcanic island following volcano eruption

    Energy Technology Data Exchange (ETDEWEB)

    Fridriksson, S.

    1976-01-01

    The study involves the terrestrial biological research on the volcanic island, Surtsey, off the coast of Iceland and the neighbouring islands and environs of the Westman Islands, which are situated on the Mid-Atlantic Ridge. An eruption of the volcano in 1973 is studied. The topographical changes on Surtsey were studied in August 1976. It is evident that the southwestern side is constantly being eroded and that the island decreases in area of some 7.5 hectares per year. Results are reported from studies of microorganisms, algae, lichens, moss, vascular plants, insects, birds, and soil, and the nitrogen cycle. Emphasis was placed on revegetation and recolonization of plants, insects, and sea birds.

  17. Preliminary study of the behavioral and biological effects of high-intensity 60-Hz electric fields. Quarterly technical progress report No. 3

    Energy Technology Data Exchange (ETDEWEB)

    Feldstone, C.S.

    1979-02-01

    This preliminary study develops and thoroughly tests the experimental protocols and apparatus that are planned for a major study of the behavioral and biological effects of high-intensity 60-Hz electric fields. The behavior of baboons will be observed before, during, and after exposure to the field at maximum intensity of 60 kV/m. Both individual performance (operant conditioning) and social behavior will be examined. The present report covers Week 25 through Week 36 of the project. Construction of the facility was nearly completed, the preliminary training of the individual behavior animals was brought close to completion, and the two sets of social animals were allowed to adapt to each other and to their environment. The report addresses the following major areas: the high-voltage exposure facility; the electric-field-probe accuracy; the holding cages for social-behavior subjects; the preliminary shaping facility; the shaping procedures; and the social-behavior subjects.

  18. Sludge Treatment Evaluation: 1992 Technical progress

    Energy Technology Data Exchange (ETDEWEB)

    Silva, L J; Felmy, A R; Ding, E R

    1993-01-01

    This report documents Fiscal Year 1992 technical progress on the Sludge Treatment Evaluation Task, which is being conducted by Pacific Northwest Laboratory. The objective of this task is to develop a capability to predict the performance of pretreatment processes for mixed radioactive and hazardous waste stored at Hanford and other US Department of Energy (DOE) sites. Significant cost savings can be achieved if radionuclides and other undesirable constituents can be effectively separated from the bulk waste prior to final treatment and disposal. This work is initially focused on chemical equilibrium prediction of water washing and acid or base dissolution of Hanford single-shell tank (SST) sludges, but may also be applied to other steps in pretreatment processes or to other wastes. Although SST wastes contain many chemical species, there are relatively few constituents -- Na, Al, NO[sub 3], NO[sub 2], PO[sub 4], SO[sub 4], and F -- contained in the majority of the waste. These constituents comprise 86% and 74% of samples from B-110 and U-110 SSTS, respectively. The major radionuclides of interest (Cs, Sr, Tc, U) are present in the sludge in small molal quantities. For these constituents, and other important components that are present in small molal quantities, the specific ion-interaction terms used in the Pitzer or NRTL equations may be assumed to be zero for a first approximation. Model development can also be accelerated by considering only the acid or base conditions that apply for the key pretreatment steps. This significantly reduces the number of chemical species and chemical reactions that need to be considered. Therefore, significant progress can be made by developing all the specific ion interactions for a base model and an acid dissolution model.

  19. [Analogies and analogy research in technical biology and bionics].

    Science.gov (United States)

    Nachtigall, Werner

    2010-01-01

    The procedural approaches of Technical Biology and Bionics are characterized, and analogy research is identified as their common basis. The actual creative aspect in bionical research lies in recognizing and exploiting technically oriented analogies underlying a specific biological prototype to indicate a specific technical application.

  20. Works Technical Department progress report, March 1961

    Energy Technology Data Exchange (ETDEWEB)

    None

    1961-04-19

    This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  1. Discovering biological progression underlying microarray samples.

    Directory of Open Access Journals (Sweden)

    Peng Qiu

    2011-04-01

    Full Text Available In biological systems that undergo processes such as differentiation, a clear concept of progression exists. We present a novel computational approach, called Sample Progression Discovery (SPD, to discover patterns of biological progression underlying microarray gene expression data. SPD assumes that individual samples of a microarray dataset are related by an unknown biological process (i.e., differentiation, development, cell cycle, disease progression, and that each sample represents one unknown point along the progression of that process. SPD aims to organize the samples in a manner that reveals the underlying progression and to simultaneously identify subsets of genes that are responsible for that progression. We demonstrate the performance of SPD on a variety of microarray datasets that were generated by sampling a biological process at different points along its progression, without providing SPD any information of the underlying process. When applied to a cell cycle time series microarray dataset, SPD was not provided any prior knowledge of samples' time order or of which genes are cell-cycle regulated, yet SPD recovered the correct time order and identified many genes that have been associated with the cell cycle. When applied to B-cell differentiation data, SPD recovered the correct order of stages of normal B-cell differentiation and the linkage between preB-ALL tumor cells with their cell origin preB. When applied to mouse embryonic stem cell differentiation data, SPD uncovered a landscape of ESC differentiation into various lineages and genes that represent both generic and lineage specific processes. When applied to a prostate cancer microarray dataset, SPD identified gene modules that reflect a progression consistent with disease stages. SPD may be best viewed as a novel tool for synthesizing biological hypotheses because it provides a likely biological progression underlying a microarray dataset and, perhaps more importantly, the

  2. Solar thermal power systems. Annual technical progress report, FY 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    A technical progress report on the DOE Solar Thermal Power Systems Program is given. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the prior to FY 1978 is given; the significant achievements and real progress of each project during FY 1978 are described; and future project activities as well as anticipated significant achievements for each project are forecast. (WHK)

  3. Solar lease grant program. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Progress on a lease program for the installation of a solar water heater with no installation charge is reported. Information on the announcement of the program, the selection of participants, the contractural agreement, progress on installation of equipment, monitoring, and evaluation is summarized. The status of the budget concerned with the program is announced. Forms used for applications for the program and an announcement from Resource Alternatives for Cilco customers are presented.

  4. Technical progress and its factors in Russia’s economy

    Directory of Open Access Journals (Sweden)

    Simon György Jr.

    2010-01-01

    Full Text Available In this paper long-term growth in Russia’s economy is viewed in the context of technical progress, based on both neoclassical and endogenous theories. The dynamics of economic growth with some aspects of catch-up development are examined, as well as capital deepening. TFP is quantified in terms of both output and productivity increases to reveal the leading role of embodied technical progress in productivity growth. An endogenous growth model helped to discern three complex factors of technical progress in the Russian economy, to which at the macro level a factor related to natural wealth (oil and gas resources was added. This enabled the author to conclude that the most important macroeconomic factor of Russia’s technical progress in the half century from the early 1960s to the late 2000s was its immobile component. At the manufacturing level the situation was more complicated, as the initial leadership of creative technical progress was superseded by the dominance of the mobile factor. The collapse of the Soviet Union made the Russian economy more service-oriented and radically changed the conditions of economic modernization, in which technology transfer ensured by FDI began to play a more prominent part, particularly after the default of 1998.

  5. Final Technical Progress Report NANOSTRUCTURED MAGNETIC MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    Charles M. Falco

    2012-09-13

    This report describes progress made during the final phase of our DOE-funded program on Nanostructured Magnetic Materials. This period was quite productive, resulting in the submission of three papers and presentation of three talks at international conferences and three seminars at research institutions. Our DOE-funded research efforts were directed toward studies of magnetism at surfaces and interfaces in high-quality, well-characterized materials prepared by Molecular Beam Epitaxy (MBE) and sputtering. We have an exceptionally well-equipped laboratory for these studies, with: Thin film preparation equipment; Characterization equipment; Equipment to study magnetic properties of surfaces and ultra-thin magnetic films and interfaces in multi-layers and superlattices.

  6. Technical Entrepreneurship and Technological Progress in Developing Countries.

    Science.gov (United States)

    Quevedo-Procel, Jose

    This paper describes the Mexican economic environment in terms of general economic conditions from the 1940s to the present, the role of science and technology in industrial progress, and the promotion and support of small companies. The technical entrepreneur is identified as the missing link that would play an important part in the technological…

  7. Plan and Design Meticulously and Promoting Technical Progress

    Institute of Scientific and Technical Information of China (English)

    Miao Chengwu

    1994-01-01

    @@ Plan and design is the key link in captial construction, and the soul of engineering construction. China Petroleum Planning & Engineering Institute (CPPEI) is one of the main undertakers for planning and designing of petroleum industry,the only leading multi-functional institute with the first class design certificate. Now it has been an organization under the China National Petroleum Corporation(CNPC)for making development strategy planning, project evaluations and technical consulting, drawing up project development plan and providing technical recommendations. It can complete plan and design for the oil and gas field facilities, pipeline construction,petroleum relinery and petro-chemical industry engineering at home and abroad. It is also a center of servicing for new technical development and scientific research. Since CPPEI was established in 1978,it has meticulously conducted on planning and designing for the technical progress of petroleum engineering.

  8. Progress in nemertean biology: development and phylogeny.

    Science.gov (United States)

    Turbeville, J M

    2002-07-01

    This paper reviews progress in developmental biology and phylogeny of the Nemertea, a common but poorly studied spiralian taxon of considerable ecological and evolutionary significance. Analyses of reproductive biology (including calcium dynamics during fertilization and oocyte maturation), larval morphology and development and developmental genetics have significantly extended our knowledge of spiralian developmental biology. Developmental genetics studies have in addition provided characters useful for reconstructing metazoan phylogeny. Reinvestigation of the cell lineage of Cerebratulus lacteus using fluorescent tracers revealed that endomesoderm forms from the 4d cell as in other spiralians and that ectomesoderm is derived from the 3a and 3b cells as in annelids, echiurans and molluscs. Studies examining blastomere specification show that cell fates are established precociously in direct developers and later in indirect developers. Morphological characters used to estimate the phylogenetic position of nemerteans are critically re-evaluated, and cladistic analyses of morphology reveal that conflicting hypotheses of nemertean relationships result because of different provisional homology statements. Analyses that include disputed homology statements (1, gliointerstitial cell system 2, coelomic circulatory system) suggest that nemerteans form the sister taxon to the coelomate spiralian taxa rather than the sister taxon to Platyhelminthes. Analyses of small subunit rRNA (18S rDNA) sequences alone or in combination with morphological characters support the inclusion of the nemerteans in a spiralian coelomate clade nested within a more inclusive lophotrochozoan clade. Ongoing evaluation of nemertean relationships with mitochondrial gene rearrangements and other molecular characters is discussed.

  9. Swallowable Wireless Capsule Endoscopy: Progress and Technical Challenges

    Directory of Open Access Journals (Sweden)

    Guobing Pan

    2012-01-01

    Full Text Available Wireless capsule endoscopy (WCE offers a feasible noninvasive way to detect the whole gastrointestinal (GI tract and revolutionizes the diagnosis technology. However, compared with wired endoscopies, the limited working time, the low frame rate, and the low image resolution limit the wider application. The progress of this new technology is reviewed in this paper, and the evolution tendencies are analyzed to be high image resolution, high frame rate, and long working time. Unfortunately, the power supply of capsule endoscope (CE is the bottleneck. Wireless power transmission (WPT is the promising solution to this problem, but is also the technical challenge. Active CE is another tendency and will be the next geneion of the WCE. Nevertheless, it will not come true shortly, unless the practical locomotion mechanism of the active CE in GI tract is achieved. The locomotion mechanism is the other technical challenge, besides the challenge of WPT. The progress about the WPT and the active capsule technology is reviewed.

  10. Wave basin model tests of technical-biological bank protection

    Science.gov (United States)

    Eisenmann, J.

    2012-04-01

    Sloped embankments of inland waterways are usually protected from erosion and other negative im-pacts of ship-induced hydraulic loads by technical revetments consisting of riprap. Concerning the dimensioning of such bank protection there are several design rules available, e.g. the "Principles for the Design of Bank and Bottom Protection for Inland Waterways" or the Code of Practice "Use of Standard Construction Methods for Bank and Bottom Protection on Waterways" issued by the BAW (Federal Waterways Engineering and Research Institute). Since the European Water Framework Directive has been put into action special emphasis was put on natural banks. Therefore the application of technical-biological bank protection is favoured. Currently design principles for technical-biological bank protection on inland waterways are missing. The existing experiences mainly refer to flowing waters with no or low ship-induced hydraulic loads on the banks. Since 2004 the Federal Waterways Engineering and Research Institute has been tracking the re-search and development project "Alternative Technical-Biological Bank Protection on Inland Water-ways" in company with the Federal Institute of Hydrology. The investigation to date includes the ex-amination of waterway sections where technical- biological bank protection is applied locally. For the development of design rules for technical-biological bank protection investigations shall be carried out in a next step, considering the mechanics and resilience of technical-biological bank protection with special attention to ship-induced hydraulic loads. The presentation gives a short introduction into hydraulic loads at inland waterways and their bank protection. More in detail model tests of a willow brush mattress as a technical-biological bank protec-tion in a wave basin are explained. Within the scope of these tests the brush mattresses were ex-posed to wave impacts to determine their resilience towards hydraulic loads. Since the

  11. Biology Division progress report, October 1, 1984-September 30, 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    The body of this report provides summaries of the aims, scope and progress of the research by groups of investigators in the Division during the period of October 1, 1984, through September 30, 1985. At the end of each summary is a list of publications covering the same period. For convenience, the summaries are assembled under Sections in accordance with the current organizational structure of the Biology Division; each Section begins with an overview. It will be apparent, however, tha crosscurrents run throughout the Division and that the various programs support and interact with each other. In addition, this report includes information on the Division's educational activities, Advisory Committee, seminar program, and international interactions, as well as extramural activities of staff members, abstracts for technical meetings, and funding and personnel levels.

  12. Technical suitability mapping of feedstocks for biological hydrogen production

    NARCIS (Netherlands)

    Panagiotopoulos, I.A.; Karaoglanoglou, L.S.; Koullas, D.P.; Bakker, R.R.; Claassen, P.A.M.; Koukios, E.G.

    2015-01-01

    The objective of this work was to map and compare the technical suitability of different raw materials for biological hydrogen production. Our model was based on hydrogen yield potential, sugar mobilization efficiency, fermentability and coproduct yield and value. The suitability of the studied r

  13. Solar thermal power systems. Annual technical progress report, FY 1979

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Gerald W.

    1980-06-01

    The Solar Thermal Power Systems Program is the key element in the national effort to establish solar thermal conversion technologies within the major sectors of the national energy market. It provides for the development of concentrating mirror/lens heat collection and conversion technologies for both central and dispersed receiver applications to produce electricity, provide heat at its point of use in industrial processes, provide heat and electricity in combination for industrial, commercial, and residential needs, and ultimately, drive processes for production of liquid and gaseous fuels. This report is the second Annual Technical Progress Report for the Solar Thermal Power Systems Program and is structured according to the organization of the Solar Thermal Power Systems Program on September 30, 1979. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the Solar Thermal Power Systems Program, a brief history, the significant achievements and real progress during FY 1979, also future project activities as well as anticipated significant achievements are forecast. (WHK)

  14. International Linear Collider-A Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Elsen, Eckhard; /DESY; Harrison, Mike; /Brookhaven; Hesla, Leah; /Fermilab; Ross, Marc; /Fermilab; Royole-Degieux, Perrine; /Paris, IN2P3; Takahashi, Rika; /KEK, Tsukuba; Walker, Nicholas; /DESY; Warmbein, Barbara; /DESY; Yamamoto, Akira; /KEK, Tsukuba; Yokoya, Kaoru; /KEK, Tsukuba; Zhang, Min; /Beijing, Inst. High Energy Phys.

    2011-11-04

    The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

  15. [Progress in synthetic biology of "973 Funding Program" in China].

    Science.gov (United States)

    Chen, Guoqiang; Wang, Ying

    2015-06-01

    This paper reviews progresses made in China from 2011 in areas of "Synthetic Biology" supported by State Basic Research 973 Program. Till the end of 2014, 9 "synthetic biology" projects have been initiated with emphasis on "microbial manufactures" with the 973 Funding Program. Combined with the very recent launch of one project on "mammalian cell synthetic biology" and another on "plant synthetic biology", Chinese "synthetic biology" research reflects its focus on "manufactures" while not giving up efforts on "synthetic biology" of complex systems.

  16. Environmental Research Division technical progress report, January 1984-December 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    Technical progress in the various research and assessment activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1984 to 1985. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Environmental Impacts, Fundamental Molecular Physics and Chemistry, and Waste Management Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter.

  17. [Research progress of cardiac systems biology].

    Science.gov (United States)

    Wang, Juan; Shang, Tong

    2009-04-01

    Systems Biology is one of the most widely discussed fields among emerging post-genomic disciplines. Medical systems biology is an important component of systems biology. The goals of medical systems biology are gaining a complete understanding of human body in normal and disease states. Driven by the great importance of cardiovascular diseases, cardiac systems biology is improving rapidly. This review provides an overview of major themes in the developing field of cardiac systems biology, including some of the high-throughput experiments and strategies used to integrate the datasets, various types of computational approaches used for developing useful quantitative models, and successful examples, future directions of cardiac systems biology.

  18. Quarterly technical progress report, February 1, 1996--April 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-28

    This report from the Amarillo National REsource Center for PLutonium provides research highlights and provides information regarding the public dissemination of information. The center is a a scientific resource for information regarding the issues of the storage, disposition, potential utilization and transport of plutonium, high explosives, and other hazardous materials generated from nuclear weapons dismantlement. The center responds to informational needs and interpretation of technical and scientific data raised by interested parties and advisory groups. Also, research efforts are carried out on remedial action programs and biological/agricultural studies.

  19. Recent progress in histochemistry and cell biology.

    Science.gov (United States)

    Hübner, Stefan; Efthymiadis, Athina

    2012-04-01

    Studies published in Histochemistry and Cell Biology in the year 2011 represent once more a manifest of established and newly sophisticated techniques being exploited to put tissue- and cell type-specific molecules into a functional context. The review is therefore the Histochemistry and Cell Biology's yearly intention to provide interested readers appropriate summaries of investigations touching the areas of tissue biology, developmental biology, the biology of the immune system, stem cell research, the biology of subcellular compartments, in order to put the message of such studies into natural scientific-/human- and also pathological-relevant correlations.

  20. Thermal energy storage technical progress report, April 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Olszewski, M.

    1993-05-01

    The Department of Energy (DOE) is supporting development of thermal energy storage (TES) as a means of efficiently coupling energy supplies to variable heating or cooling demands. Uses of TES include electrical demand-side management in buildings and industry, extending the utilization of renewable energy resources such as solar, and recovery of waste heat from periodic industrial processes. Technical progress to develop TES for specific diurnal and industrial applications under the Oak Ridge National Laboratory`s TES program from April 1992 to March 1993 is reported and covers research in the areas of low temperature sorption, thermal energy storage water heater, latent heat storage wallboard and latent/sensible heat regenerator technology development.

  1. Technical and Biological Reclamation of the Topolnica Tailing Dump

    OpenAIRE

    Dambov, Risto; Spasovski, Orce

    2009-01-01

    Flotation waste is disposed of into a canyon type of dump. Discharge has been done in layers for more than twenty-five years that has led to the present state of the tailing dump. Flotation of copper ore is one of the production process in the Buchim Copper Mine which seriously disturbs the surrounding land. The drastic disturbance has severely changed the chemical and physical properties of the dump which entails the need for reclamation of the newly created surrounding. Technical and biolog...

  2. Biology Division progress report, June 1, 1980-July 31, 1982

    Energy Technology Data Exchange (ETDEWEB)

    1982-12-01

    Highlights of progress for the period June 1980 through July 1982 are summarized. Discussions of projects are presented under the following headings: molecular and cellular sciences; cellular and comparative mutagenesis; mammalian genetics and teratology; toxicology; and carcinogenesis. In addition this report includes an outline of educational activities. Separate abstracts have been prepared for individual technical reports for inclusion in the Energy Data Base. (RJC)

  3. [Progress in research on the biological reason of male homosexuality].

    Science.gov (United States)

    Yu, Wei; Feng, Tie-jian

    2012-04-01

    Male homosexuality is a complex phenomenon which is universal and with unknown causes. Researchers believe that both biological and environmental factors have played a role in its pathogenesis. Researches focusing on genetics, neurobiology, development and endocrinology have made certain progress. In this paper, we have reviewed the biological causes of male homosexuality, which may provide clues for further research in this field.

  4. Modern problems of technical progress and methodological support in medicine

    Science.gov (United States)

    Novyc'kyy, Victor V.; Lushchyk, Ulyana B.

    2001-06-01

    A rapid development of modern computer technologies gave a powerful incentive to technical progress as a whole and to medical equipment in particular. A range of medical diagnostic computer-based systems has recently appeared. There are various fields these techniques are used in: roentgenology, ultrasound diagnostic, neurophysiology, angiology etc. The advantages of the use of computer interface are undoubted: it gives possibility to enhance the functioning of the system itself, speed up all technological processes, carry out a reliable and easy archivation and exchange the information obtained. But the most important advantage of using PC in diagnostic system lies in an unlimited freedom of use mathematical algorithms and flexible mathematical models for processing information obtained. On the other hand, the absence of clinical techniques for interpretation of the data obtained is an obstacle to the use of software at its full potential. As a result, a close connection of a scientific development of hardware with high-informative techniques for clinical interpretation of the instrumental data obtained has become topical as never before. We see an optimal solution in introducing the interpretation patterns in conjunction with purely numerical computations into mathematical simulations.

  5. FY 1992 work plan and technical progress reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-11-01

    The Desert Research Institute (DRI) is a division of the University of Nevada System devoted to multidisciplinary scientific research. For more than 25 years, DRI has conducted research for the US Department of Energy`s Nevada Field Office (DOE/NV) in support of operations at the Nevada Test Site (NTS). During that time, the research program has grown from an early focus on hydrologic studies to include the areas of geology, archaeology, environmental compliance and monitoring, statistics, database management, public education, and community relations. The range of DRI`s activities has also expanded to include a considerable amount of management and administrative support in addition to scientific investigations. DRI`s work plan for FY 1992 reflects a changing emphasis in DOE/NV activities from nuclear weapons testing to environmental restoration and monitoring. Most of the environmental projects from FY 1991 are continuing, and several new projects have been added to the Environmental Compliance Program. The Office of Technology Development Program, created during FY 1991, also includes a number of environmental projects. This document contains the FY 1992 work plan and quarterly technical progress reports for each DRI project.

  6. Effect of biologic agents on radiographic progression of rheumatoid arthritis

    Directory of Open Access Journals (Sweden)

    Gabriel J Tobón

    2010-08-01

    Full Text Available Gabriel J Tobón1, Alain Saraux1,2, Valérie Devauchelle-Pensec1,21Immunology Laboratory, Morvan Hospital, Université de Bretagne Occidentale, Brest, France; 2Rheumatology Unit, Hôpital de la Cavale Blanche, CHU Brest, FranceAbstract: The treatment of rheumatoid arthritis (RA has benefited over the last few years from the introduction of biologic agents whose development was based on new insights into the immunological factors involved in the pathogenesis of RA and the development of joint damage. These biological agents have been proven effective in RA patients with inadequate responses to synthetic disease-modifying antirheumatic drugs (DMARDs. Preventing joint damage is now the primary goal of RA treatment, and guidelines exist for the follow-up of joint abnormalities. Most biologic agents produced high clinical and radiological response rates in patients with established or recent-onset RA. Thus, for the first time, obtaining a remission is a reasonable treatment goal in RA patients. Factors that are crucial to joint damage control are: early initiation of DMARDs, use of intensive treatments including biological agents, and close monitoring of clinical disease activity and radiographic progression. However, some patients remain unresponsive to all available treatments and continue to experience joint damage progression. A major objective now is to identify patients at high risk for severe joint damage, in order to tailor the treatment regimen to their specific needs.Keywords: rheumatoid arthritis, radiographic progression, biologics

  7. Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

    Energy Technology Data Exchange (ETDEWEB)

    Ulm, Franz-Josef

    2000-03-31

    OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

  8. Responsive copolymers for enhanced petroleum recovery. Quarterly technical progress report, December 22, 1993--March 21, 1994

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, C.; Hester, R.

    1994-06-01

    The overall goal of this research is the development of advanced water-soluble copolymers for use in enhanced oil recovery. This report summarizes technical progress for the following tasks: advanced copolymer synthesis; and characterization of molecular structure of copolymers.

  9. Verification of Steelmaking Slags Iron Content Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang

    2006-10-04

    The steel industry in the United States generates about 30 million tons of by-products each year, including 6 million tons of desulfurization and BOF/BOP slag. The recycling of BF (blast furnace) slag has made significant progress in past years with much of the material being utilized as construction aggregate and in cementitious applications. However, the recycling of desulfurization and BOF/BOP slags still faces many technical, economic, and environmental challenges. Previous efforts have focused on in-plant recycling of the by-products, achieving only limited success. As a result, large amounts of by-products of various qualities have been stockpiled at steel mills or disposed into landfills. After more than 50 years of stockpiling and landfilling, available mill site space has diminished and environmental constraints have increased. The prospect of conventionally landfilling of the material is a high cost option, a waste of true national resources, and an eternal material liability issue. The research effort has demonstrated that major inroads have been made in establishing the viability of recycling and reuse of the steelmaking slags. The research identified key components in the slags, developed technologies to separate the iron units and produce marketable products from the separation processes. Three products are generated from the technology developed in this research, including a high grade iron product containing about 90%Fe, a medium grade iron product containing about 60% Fe, and a low grade iron product containing less than 10% Fe. The high grade iron product contains primarily metallic iron and can be marketed as a replacement of pig iron or DRI (Direct Reduced Iron) for steel mills. The medium grade iron product contains both iron oxide and metallic iron and can be utilized as a substitute for the iron ore in the blast furnace. The low grade iron product is rich in calcium, magnesium and iron oxides and silicates. It has a sufficient lime value and

  10. Verification of Steelmaking Slags Iron Content Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang

    2006-10-04

    The steel industry in the United States generates about 30 million tons of by-products each year, including 6 million tons of desulfurization and BOF/BOP slag. The recycling of BF (blast furnace) slag has made significant progress in past years with much of the material being utilized as construction aggregate and in cementitious applications. However, the recycling of desulfurization and BOF/BOP slags still faces many technical, economic, and environmental challenges. Previous efforts have focused on in-plant recycling of the by-products, achieving only limited success. As a result, large amounts of by-products of various qualities have been stockpiled at steel mills or disposed into landfills. After more than 50 years of stockpiling and landfilling, available mill site space has diminished and environmental constraints have increased. The prospect of conventionally landfilling of the material is a high cost option, a waste of true national resources, and an eternal material liability issue. The research effort has demonstrated that major inroads have been made in establishing the viability of recycling and reuse of the steelmaking slags. The research identified key components in the slags, developed technologies to separate the iron units and produce marketable products from the separation processes. Three products are generated from the technology developed in this research, including a high grade iron product containing about 90%Fe, a medium grade iron product containing about 60% Fe, and a low grade iron product containing less than 10% Fe. The high grade iron product contains primarily metallic iron and can be marketed as a replacement of pig iron or DRI (Direct Reduced Iron) for steel mills. The medium grade iron product contains both iron oxide and metallic iron and can be utilized as a substitute for the iron ore in the blast furnace. The low grade iron product is rich in calcium, magnesium and iron oxides and silicates. It has a sufficient lime value and

  11. Technical progress of nuclear energy: economic and environmental prospects

    Energy Technology Data Exchange (ETDEWEB)

    Naudet, G.

    1994-12-31

    This document deals with three different aspects of the nuclear energy: first the operating and economic performances of nuclear power plants in the world, the French nuclear competitiveness. Then, the technical and economic perspectives about reactors and fuels cycle and the advantages towards atmospheric pollution are discussed to favour a new worldwide nuclear development. (TEC). 8 refs., 4 figs., 6 tabs.

  12. Evaporation by mechanical vapor recompression. Technical progress report, September 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, C.H.; Coury, G.E.

    1979-01-01

    Progress to date in the development of a study of the application of the technologies of mechanical vapor recompression and falling film evaporators as applied to the beet sugar industry is reported. Progress is reported in the following areas: technical literature search and plant visitations of existing applications of VR/FFE.

  13. Biology Division progress report, October 1, 1993--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This Progress Report summarizes the research endeavors of the Biology Division of the Oak Ridge National Laboratory during the period October 1, 1993, through September 30, 1995. The report is structured to provide descriptions of current activities and accomplishments in each of the Division`s major organizational units. Lists of information to convey the entire scope of the Division`s activities are compiled at the end of the report. Attention is focused on the following research activities: molecular, cellular, and cancer biology; mammalian genetics and development; genome mapping program; and educational activities.

  14. Biology Division progress report, October 1, 1991--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hartman, F.C.; Cook, J.S.

    1993-10-01

    This Progress Report summarizes the research endeavors of the Biology Division of the Oak Ridge National Laboratory during the period October 1, 1991, through September 30, 1993. The report is structured to provide descriptions of current activities and accomplishments in each of the Division`s major organizational units. Lists of information to convey the entire scope of the Division`s activities are compiled at the end of the report.

  15. LANL technical progress update for US HJPRR working group

    Energy Technology Data Exchange (ETDEWEB)

    Dombrowski, David E [Los Alamos National Laboratory

    2011-01-06

    The outline of this presentation is: (1) Collaboration on Master Alloy Melting; (2) Data for Safety Analysis, (3) HIP can development status, (4) Bond strength quality, (5) Plasma spraying results, and (6) Bare Rolling Larger Rolling Ingots. Significant near term progress has been made in five areas: (1) Collaboration on Master Alloy Melting; (2) HIP can development status; (3) Bond strength quality; (4) Plasma spraying results; and (5) Bare Rolling Larger Rolling Ingots. Significant progress is expected in the next month on several important areas: (1) Intrinsic bond strength of plasma sprayed Zr (2) Advanced Cleaning; (3) Residual Stress Collaboration with INL; and (4) Cost Metric Assessment.

  16. Molecular biological enhancement of coal biodesulfurization. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D. Jr.; Baker, B.; Palmer, D.T.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravarty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1992-10-08

    Progress is reported in understanding Thiobacillus molecular biology, specifically in the area of vector development. At the initiation of this program, the basic elements needed for performing genetic engineering in T. ferrooxidans were either not yet developed. Improved techniques are described which will make it easier to construct and analyze the genetic structure and metabolism of recombinant T. ferrooxidans. The metabolism of the model organic sulfur compound dibenzothiophene (DBT) by certain heterotrophic bacteria was confirmed and characterized. Techniques were developed to analyze the metabolites of DBT, so that individual 4S pathway metabolites could be distinguished. These techniques are expected to be valuable when engineering organic sulfur metabolism in Thiobacillus. Strain isolation techniques were used to develop pure cultures of T. ferrooxidans seven of which were assessed as potential recombinant hosts. The mixotrophic strain T. coprinus was also characterized for potential use as an electroporation host. A family of related Thiobacillus plasmids was discovered in the seven strains of P. ferrooxidans mentioned above. One of these plasmids, pTFI91, was cloned into a pUC-based plasmid vector, allowing it to propagate in E. coli. A key portion of the cloned plasmid was sequenced. This segment, which is conserved in all of the related plasmids characterized, contains the vegetative origin of DNA replication, and fortuitously, a novel insertion sequence, designated IS3091. The sequence of the DNA origin revealed that these Thiobacillus plasmids represent a unique class of replicons not previously described. The potentially useful insertion sequence IS3091 was identified as a new member of a previously undefined family of insertion sequences which include the E. coli element IS30.

  17. Technical progress report, 1 April-30 June 1981

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    This report describes the technical accomplishments during the quarter ending June 1981, on the commercial nuclear waste management programs under the direction of the Office of Nuclear Waste Isolation (ONWI). The ONWI program is organized into 8 tasks entitled: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. Principal investigators in each of these areas have submitted summaries of quarterly highlights for inclusion in this report. Separate abstracts have been prepared for 5 of these tasks for inclusion in the Energy Data Base. (DMC)

  18. Environmental Research Division technical progress report: January 1986--October 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    Technical process in the various research activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1986-1987. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Fundamental Molecular Physics and Chemistry, and Organic Geochemistry and Environmental Instrumentation Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter. Individual projects under each division are processed separately for the data bases.

  19. Solar hot water space heating system. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Van Dam, T

    1979-08-13

    A retrofit solar heating system was installed on Madison Hall at Jordan College, Cedar Springs, Michigan. The system provides heating and domestic water preheating for a campus dormitory. Freeze protection is provided by a draindown system. The building and solar system, construction progress, and design changes are described. Included in appendices are: condensate trap design, structural analysis, pictures of installation, operating instructions, maintenance instructions, and as-built drawings. (MHR)

  20. C-Mod Collaboration Informal Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth W. Gentle

    2007-12-31

    The aims of the collaboration have not changed. A specific list of tasks was agreed upon during the Fall of 2006 in preparation for the 2007 C-Mod campaign by Earl Marmar, Head of the Alcator Project, Kenneth Gentle, Principal Investigator, and William Rowan, Collaboration Coordinator with the facilitation of Adam Rosenberg (DOE grant monitor for the collaboration). The activities follow the list of tasks and are discussed in this progress report.

  1. Monthly technical progress report, January 1, 1996 - January 28, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-24

    This is the January 1996 progress report contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities, Cassini RTG Program. Included are discussions on the status of: (1) spacecraft integration and support, (2) engineering support, (3) safety, (4) qualified unicouple production, (5) ETG fabrication, Assembly, and Test, (6) ground support equipment, (7) RTG shipping and launch support, (8) designs, reviews, and mission applications, (9) project management, and (10) CAGO acquisition.

  2. Proteomic analysis of mitochondria: biological and clinical progresses in cancer.

    Science.gov (United States)

    Wang, Yang; Zhang, Jing; Li, Bin; He, Qing-Yu

    2017-10-01

    Mitochondria play important roles in regulating multiple biological processes and signalling pathways in eukaryotic cells, and mitochondrial dysfunction may result in a wide range of serious diseases, including cancer. With improvements in the identification of mitochondrial proteins, mitochondrial proteomics has made great achievements. In particular, this approach has been widely used to compare tumour cells at different stages of malignancy. Therefore, there is an urgent need to identify and characterize the function of mitochondrial proteins in cancer progression and to determine the involved mechanisms. Areas covered: We provide an overview of recent progress related to mitochondrial proteomics in cancer and the application of comparative mitochondrial proteomics in various biological processes, including apoptosis, necroptosis, autophagy and metastasis, as well as clinical progress in cancer. Proteomics-related reports were found using PubMed and Google Scholar databases. Expert commentary: Understanding both post-translational modification and post-translational processing is important in the comprehensive characterization of protein function. The application of comparative mitochondrial proteomics to investigate clinical samples and cancer cells will contribute to our understanding of the molecular interplay of mitochondrial proteins in the development of cancer. This approach will mine more biomarkers for diagnosis and prognosis and improve therapeutic outcomes among cancer patients.

  3. Technical Progress Has Positive,Differentiated Effects on Energy Efficiency of Chinese Industries

    Institute of Scientific and Technical Information of China (English)

    李廉水; 周勇

    2007-01-01

    The rebound effects of technological advancement on energy consumption make it very complicated to measure the impact of technological advancement on energy efficiency.This article,taking 35 industries as samples,utilizes the non-parameter DEA-Malmquist productivity approach to subcategorise technological advancement into three parts:science-technological(sci-tech)progress,pure technical efficiency and efficiency of scale.The panel technique is then used to work out each subcategory’s contribution to energy efficiency individually.Findings show that technological efficiency (calculated by multiplying the results of pure technical efficiency and scale efficiency)is the principal factor in the improvement of energy efficiency while the contribution from sci-tech progress is comparatively less.Overtime,however,the effect of sci-tech progress is gradually heightened while the effect of technical efficiency slowly diminishes.

  4. Electronic refrigerant leak detector. Quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Talamas, E. Jr.

    1998-10-15

    The project comprises three main tasks. They are (1) Develop, design, and fabricate sensors, (2) Develop, design, and fabricate test instruments, (3) Testing and data analysis. The milestone includes 17 sub-tasks for the 52-weeks project period, starting on May 1, 1998 and ending on April 30, 1999. As stated in the Application for Federal Assistance, Micronic intended to relocate to a new office by June of 1998. This decision was delayed, since the first partial payment was transferred on August 12, 1998. Micronic plans to relocate this November. A second Provisional Application for a US patent has been filed. Progress made during this period is reported.

  5. Quarterly technical progress report, April-June 1982

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-04-01

    Progress reports are presented for the following tasks: (1) preparation of low-rank coals; application of liquefaction processes to low-rank coals; (2) slagging fixed-bed gasification; (3) atmospheric fluidized-bed combustion of low-rank coal; (4) ash fouling and combustion modification for low-rank coal; (5) combined flue gas cleanup/simultaneous SO/sub x/-NO/sub x/ control; (6) particulate control and hydrocarbons and trace element emissions from low-rank coals; (7) waste characterization and disposal; and (9) exploratory research.

  6. Biology Division. Progress report, August 1, 1982-September 30, 1983

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    The Biology Division is the component of the Oak Ridge National Laboratory that investigates the potential adverse health effects of energy-related substances. The body of this report provides summaries of the aims, scope and progress of the research of groups of investigators in the Division during the period of August 1, 1982, through September 30, 1983. At the end of each summary is a list of publications covering the same period (published or accepted for publication). For convenience, the summaries are assembled under Sections in accordance with the current organizational structure of the Biology Division; each Section begins with an overview. It will be apparent, however, that currents run throughout the Division and that the various programs support and interact with each other.

  7. Texas Experimental Tokamak. Technical progress report, April 1990--April 1993

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, A.J.

    1993-04-01

    This progress report covers the period from November 1, 1990 to April 30, 1993. During that period, TEXT was operated as a circular tokamak with a material limiter. It was devoted to the study of basic plasma physics, in particular to study of fluctuations, turbulence, and transport. The purpose is to operate and maintain TEXT Upgrade as a complete facility for applied tokamak physics, specifically to conduct a research program under the following main headings: (1) to elucidate the mechanisms of working gas, impurity, and thermal transport in tokamaks, in particular to understand the role of turbulence; (2) to study physics of the edge plasma, in particular the turbulence; (3) to study the physics or resonant magnetic fields (ergodic magnetic divertors, intra island pumping); and (4) to study the physics of electron cyclotron heating (ECRH). Results of studies in each of these areas are reported.

  8. TECHNICAL TRAINING SEMINAR: High Temperature Superconductors: Progress and Issues

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Monday 24 June from 14:30 to 15:30 - Training Centre Auditorium - bldg. 593-11 High Temperature Superconductors: Progress and Issues Prof. Jan Evetts / UNIVERSITY OF CAMBRIDGE, Department of Materials Science and Metallurgy, UK Grappling with grain boundaries: Current transport processes in granular High Temperature Superconductors (HTS) The development of High Temperature Superconductors, seen from a materials scientist's point of view, is relevant to the superconductivity community at CERN: their possible high current applications can include high performance magnets for future accelerators. There is an urgent need to develop a quantitative description of HTS conductors in terms of their complex anisotropy, inhomogeneity and dimensionality. This is essential both for the practical specification of a conductor and for charting routes to conductor optimisation. The critical current, the n-value, dissipation and quenching characteristics are amongst most important parameters that make up an engineering specifi...

  9. Texas Experimental Tokamak, a plasma research facility: Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, A.J.

    1995-08-01

    In the year just past, the authors made major progress in understanding turbulence and transport in both core and edge. Development of the capability for turbulence measurements throughout the poloidal cross section and intelligent consideration of the observed asymmetries, played a critical role in this work. In their confinement studies, a limited plasma with strong, H-mode-like characteristics serendipitously appeared and received extensive study though a diverted H-mode remains elusive. In the plasma edge, they appear to be close to isolating a turbulence drive mechanism. These are major advances of benefit to the community at large, and they followed from incremental improvements in diagnostics, in the interpretation of the diagnostics, and in TEXT itself. Their general philosophy is that the understanding of plasma physics must be part of any intelligent fusion program, and that basic experimental research is the most important part of any such program. The work here demonstrates a continuing dedication to the problems of plasma transport which continue to plague the community and are an impediment to the design of future devices. They expect to show here that they approach this problem consistently, systematically, and effectively.

  10. Technical Division quarterly progress report, January 1--March 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Slansky, C.M. (ed.)

    1977-05-01

    Progress is reported in three categories: Fuel Cycle Research and Development, special materials production, and projects supporting energy development. Results are presented on the fluidized-bed calcination of high-level radioactive waste from the reprocessing of spent commercial nuclear fuel, on the post treatment of the calcine, and on the removal of actinide elements from the waste prior to calcination. Other projects include the development of storage technology for /sup 85/Kr waste; a study of the hydrogen mordenite catalyzed reaction between NO/sub x/ and NH/sub 3/; the adsorption and storage of /sup 129/I on silver exchanged mordenite; physical properties, materials of construction, and unit operations studies on the evaporation of high-level waste; the behavior of volatile radionuclides during the combustion of HTGR graphite-based fuel; and the use of fission product ruthenium in age-dating uranium ore bodies. The long-term management of defense waste from the ICPP covers post-calcination treatment of ICPP calcined waste. Improvements are reported on the Fluorinel head end process for Zircaloy-clad fuels. Studies are included on nuclear materials security; application of a liquid-solid fluidized-bed heat exchanger to the recovery of geothermal heat; inplant reactor source term measurements; burnup methods for fast breeder reactor fuels; research on analytical methods; and the behavior of environmental species of iodine.

  11. Technical Assistance Paper: Third-Grade Student Progression. DPS: 2013-56

    Science.gov (United States)

    Florida Department of Education, 2013

    2013-01-01

    The purpose of this Technical Assistance Paper (TAP) is to provide school districts with updates and changes relative to third-grade student progression policies, including information on alternative assessments, promotion criteria and resources. This paper provides: (1) General Information; (2) Student Portfolios for Third-Grade Students; (3)…

  12. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1--July 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    Progress is reported on research projects related to the following: Electronic resource library; Environment, safety, and health; Communication, education, training, and community involvement; Nuclear and other materials; and Reporting, evaluation, monitoring, and administration. Technical studies investigate remedial action of high explosives-contaminated lands, radioactive waste management, nondestructive assay methods, and plutonium processing, handling, and storage.

  13. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT MAY 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astley, E. R.; Cabell, C. P.

    1969-06-06

    This report was prepared by Battelle-Northwest under Contract No. AT(45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during May 1969 .

  14. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT SEPTEMBER 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astely, E. R.; Cabell, C. P.

    1969-10-07

    This report was prepared by Battelle-Northwest under Contract No. AT(45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during September 1969.

  15. Technical Adequacy and Acceptability of Curriculum-Based Measurement and the Measures of Academic Progress

    Science.gov (United States)

    January, Stacy-Ann A.; Ardoin, Scott P.

    2015-01-01

    Curriculum-based measurement in reading (CBM-R) and the Measures of Academic Progress (MAP) are assessment tools widely employed for universal screening in schools. Although a large body of research supports the validity of CBM-R, limited empirical evidence exists supporting the technical adequacy of MAP or the acceptability of either measure for…

  16. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT FEBRUARY 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astley, E. R.

    1969-03-07

    This report was prepared by Battelle-Northwest under Contract No. AT (45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during February 1969.

  17. Cassini RTG Program. Monthly technical progress report, 27 November--31 December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-24

    This monthly technical progress report provided information on the following tasks: spacecraft integration and liaison; engineering support; safety analysis; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, and reliability, and contractor acquired government owned (CAGO) property acquisition.

  18. Development of superior asphalt recycling agency: Phase 1, Technical feasibility. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bullin, J.A.; Glover, C.J.; Davison, R.R.; Lin, Moon-Sun; Chaffin, J.; Liu, Meng; Eckhardt, C.

    1996-04-01

    About every 12 years, asphalt roads must be reworked, and this is usually done by placing thick layers (hot-mix overlays) of new material on top of failed material, resulting in considerable waste of material and use of new asphalt binder. A good recycling agent is needed, not only to reduce the viscosity of the aged material but also to restore compatibility. Objective is to establish the technical feasibility (Phase I) of determining the specifications and operating parameters for producing high quality recycling agents which will allow most/all the old asphalt-based road material to be recycled. It is expected that supercritical fractionation can be used. The advanced road aging simulation procedure will be used to study aging of blends of old asphalt and recycling agents.

  19. Professional technical support services for the Mining Equipment Test Facility. First annual technical progress report, April 14-September 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Garson, R C

    1981-10-01

    The Department of Energy recently began the operation of its Mining Equipment Test Facility. One component at that facility is the highly sophisticated Mine Roof Simulator (MRS) for research and development of roof support equipment. Because of its previous experience, the University of Pittsburgh was contracted to assist the Facilities Manager by providing professional technical support services, principally for the MRS. This technical progress report briefly describes the services provided during the reporting period and planned for the next period. No significant technical disclosures of interest to those not associated with the MRS are contained herein. One of the four units of the US government-owned METF is the Mine Roof Simulator. This unique $10 million test facility was designed to simulate underground mine roof loads and motions. The MRS is a hybrid, analog-digital, computer-controlled, closed-loop, electro-hydraulic, research device capable of applying either loads or displacements in the vertical and one horizontal axis. Its vertical capacity of 3,000,000 pounds can be applied over its 20 by 20 foot active test area. The horizontal load capacity is 1,600,000 pounds. It can simulate coal seam heights of up to 16 feet. Automatic data acquisition and real time display are provided. The most modern, sophisticated technology was used in its design and construction.

  20. PREFACE: Scientific and Technical Challenges in the Well Drilling Progress

    Science.gov (United States)

    2015-02-01

    departments - Technologies in Mineral Exploration and Technologies in Mineral Exploration were merged into one department. In 2003 the newly merged Department of Drilling was established within the Institute of Petroleum Engineering, now the Institute of Natural Resources and is located in Building № 6 where it began its life. During these 60 years more than 3000 specialists have graduated the Department of Drilling, many whom are highly-qualified and dedicated professionals. There is no doubt that this Conference involved comprehensive advanced engineering problems in drilling and issues on relevant personnel training. It is extremely important to understand how the 60-year progress and contribution in the field of drilling has left its trace in the history of this Department; and, that, now, it is necessary to move further and seek new and new horizons in drilling.

  1. Correction of technical bias in clinical microarray data improves concordance with known biological information

    DEFF Research Database (Denmark)

    Eklund, Aron Charles; Szallasi, Zoltan Imre

    2008-01-01

    The performance of gene expression microarrays has been well characterized using controlled reference samples, but the performance on clinical samples remains less clear. We identified sources of technical bias affecting many genes in concert, thus causing spurious correlations in clinical data...... sets and false associations between genes and clinical variables. We developed a method to correct for technical bias in clinical microarray data, which increased concordance with known biological relationships in multiple data sets....

  2. Appraisement on Contributive Ratio of Scientific and Technical Progresses in Milk Productive Enterprises by Model C2GS2

    Institute of Scientific and Technical Information of China (English)

    SUN Futian; SUN Liqun; YANG Guanglin

    2008-01-01

    Scientific and technical progress has been the driving forces of enterprises development. Milk productive enterprises are developing faster and growing better. It is very important to measure the contributive ratio of scientific and technical progress in milk productive enterprises. And the appraisement could help to develop milk productive enterprises. The model C2GS2 was established to appraise the contributive ratio of scientific and technical progress in milk productive enterprises in the research. And the appraisement on the contributive ratio of scientific and technical progress in milk productive enterprises was made by the model. In the results of appraisement, science and technology play a main role in milk productive enterprises. It is shown that our milk productive enterprises are developed by scientific and technical progress while not by input of productive factors.

  3. From Mephistopheles to Isaiah: Jacques Loeb, technical biology and war.

    Science.gov (United States)

    Fangerau, Heiner

    2009-04-01

    In 1917, the German-American scientist Jacques Loeb (1859-1924) published a short essay, entitled 'Biology and War', that summarized his disagreement with World War I. He was deeply saddened by the break-up of the international scientific community as a consequence of the actions of bellicose politicians. These actions were in direct opposition to his efforts to promote social reform, mechanistic biology and scientific internationalism. The aim of this paper is to examine Loeb's activities aimed at these efforts before, during and after the war. It attempts to explain how Loeb's scientific work was formed, what was special about it and why it was both successful and attacked. Particular emphasis is placed on how Loeb reacted to the War and the subsequent forced disintegration of his international scientific network. Loeb's attempts to integrate his interpretation of biology into post-war Europe's approach to the life sciences is analysed in connection with his social commitment. It is argued that his emigration to the USA, the circumstances of World War I, the reaction of his German colleagues to it and the demolition of the international scientific community changed: (1) Loeb's feelings towards his old home; (2) the direction of his scientific endeavours; and (3) his engagement in science politics. His correspondence with eminent scientists from all over the world serves as a key to Loeb's efforts in the context of the social elements of scientific networks and perceptions.

  4. Examining the Technical Adequacy of Second-Grade Reading Comprehension Measures in a Progress Monitoring Assessment System. Technical Report # 08-08

    Science.gov (United States)

    Alonzo, Julie; Liu, Kimy; Tindal, Gerald

    2008-01-01

    This technical report describes the development of reading comprehension assessments designed for use as progress monitoring measures appropriate for 2nd Grade students. The creation, piloting, and technical adequacy of the measures are presented. The following are appended: (1) Item Specifications for MC [Multiple Choice] Comprehension - Passage…

  5. Division of Biological and Medical Research annual technical report 1982

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.W. (ed.)

    1983-05-01

    This report summarizes research during 1982 in the Division of Biological and Medical Research, Argonne National Laboratory. Studies in Carcinogenesis address mechanisms of chemical and radiation carcinogenesis including the processes of tumor initiation and promotion. The studies employ rat liver and mouse skin models as well as human rodent cell culture systems. The use of liposomes for metal mobilization is also explored. Low Level Radiation studies include delineation of the hematopoietic and other responses of dogs to continuous low level gamma irradiation, comparison of lifetime effects in mice of low level neutron and gamma irradiation, and study of the genetic effects of high LET radiation. Molecular Biology research develops two-dimensional electrophoresis systems for diagnosis and detection of cancer and other diseases. Fundamental structural and biophysical investigations of immunoglobulins and other key proteins are included, as are studies of cell growth, and of molecular and cellular effects of solar uv light. Research in Toxicology uses cellular, physiological, whole animal, and chronobiological end points and chemical separations to elucidate mechanisms and evaluate hazards of coal conversion by-products, actinides, and toxic metals. The final sections cover support facilities, educational activities, seminars, staff talks, staff, and funding agencies.

  6. Division of Biological and Medical Research annual technical report, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.W. (ed.)

    1982-06-01

    This report summarizes research during 1981 in the Division of Biological and Medical Research, Argonne National Laboratory. Studies in Low Level Radiation include comparison of lifetime effects in mice of low level neutron and gamma irradiation, delineation of the responses of dogs to continuous low level gamma irradiation, elucidation of mechanisms of radiation damage and repair in mammalian cells, and study of the genetic effects of high LET radiations. Carcinogenesis research addresses mechanisms of tumor initiation and promotion in rat liver, chemical carcinogenesis in cultured mammalian cells, and molecular and genetic mechanisms of chemical and ultraviolet mutagenesis in bacteria. Research in Toxicology uses a variety of cellular, whole animal, and chronobiological end points, chemical separations, and statistical models to evaluate the hazards and mechanisms of actions of metals, coal gasification by products, and other energy-related pollutants. Human Protein Index studies develop two-dimensional electrophoresis systems for diagnosis and detection of cancer and other disease. Biophysics research includes fundamental structural and biophysical investigations of immunoglobulins and key biological molecules using NMR, crystallographic, and x-ray and neutron small-angle scattering techniques. The final sections cover support facilities, educational activities, seminars, staff talks, staff, and funding agencies.

  7. Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 4

    Energy Technology Data Exchange (ETDEWEB)

    Ulm, Franz-Josef

    2000-06-30

    OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 4. The analysis of the effect of cracks on the acceleration of the calcium leaching process of cement-based materials has been pursued. During the last period (Technical Progress Report No 3), we have introduced a modeling accounting for the high diffusivity of fractures in comparison with the weak solid material diffusivity. It has been shown through dimensional and asymptotic analysis that small fractures do not significantly accelerate the material aging process. This important result for the overall structural aging kinetics of containment structure has been developed in a paper submitted to the international journal ''Transport in Porous Media''.

  8. Cassini RTG Program monthly technical progress report, July 28--August 24, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-24

    The technical progress achieved during this period is described. This report is organized by program task structure: (1) spacecraft and integration liaison; (2) engineering support; (3) safety; (4) qualified unicouple production; (5) ETG fabrication, assembly, and test; (6) ground support equipment (GSE); (7) RTG shipping and launch support; (8) designs, reviews, and mission applications; (9) project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and (10) CAGO acquisition (capital funds).

  9. Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Reports on a quarterly basis. This report comprises the first Quarterly Technical Progress Report for Year 2 of the Agreement. This report reflects the progress and/or efforts performed on the sixteen (16) technical projects encompassed by the Year 2 Agreement for the period of January 1 through March 31, 1994. In situ bioremediation of chlorinated organic solvents; Microbial enrichment for enhancing in-situ biodegradation of hazardous organic wastes; Treatment of volatile organic compounds (VOCs) using biofilters; Drain-enhanced soil flushing (DESF) for organic contaminants removal; Chemical destruction of chlorinated organic compounds; Remediation of hazardous sites with steam reforming; Soil decontamination with a packed flotation column; Use of granular activated carbon columns for the simultaneous removal of organics, heavy metals, and radionuclides; Monolayer and multilayer self-assembled polyion films for gas-phase chemical sensors; Compact mercuric iodide detector technology development; Evaluation of IR and mass spectrometric techniques for on-site monitoring of volatile organic compounds; A systematic database of the state of hazardous waste clean-up technologies; Dust control methods for insitu nuclear and hazardous waste handling; Winfield Lock and Dam remediation; and Socio-economic assessment of alternative environmental restoration technologies.

  10. TERTIARY ECONOMIC ACTIVITIES UNDER THE IMPACT OF SCIENTIFIC AND TECHNICAL PROGRESS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    PAUL-BOGDAN ZAMFIR

    2015-06-01

    Full Text Available The scientific and technical progress put its mark in a different manner on all activities that occur within contemporary economy and it was present in the entire evolution of human society, but its implications and effects were never so strong and extensive. There is no area of activity in which progress not to interfere, both as important mutations that they are happening in the all area of production factors, as well as the place and role of the human factor in the deployment of production processes. In the current period the progress has exceeded certain human limits, operating in other areas which until more now it seems unattainable by the achievements of new technology. In this paradigm are successfully integrated tertiary activities in which the scientific and technical progress entered with great difficulty.Nowadays we are witnessing spectacular evolutions whether we talk about movement of goods, education, research, health, transportation, arts and culture, etc. The purpose of this paper is to determine the degree in which scientific and technical progress. In this paper we proposed to determine the level in which the scientific and technical progress, had a decisive impact on the development of the tertiary sector in general and in Romania in particular , we shall specify which are the economic tertiary activities that adapt fast to new changes occurred in the system of informational society. In this context we have to mention the systems of intelligent transport, electronic governance, medical system based on ICT online educational systems, as a possible response of the tertiary sector to the adaptation of technological progress benefits. In the first part of this paper we focused on the conceptual delimitation of scientific concepts at which we refer often such as: technological progress and innovative services which inevitably determine the evolution of tertiary sector under the impact of new modern technologies. On this background

  11. Stem cells - biological update and cell therapy progress.

    Science.gov (United States)

    Girlovanu, Mihai; Susman, Sergiu; Soritau, Olga; Rus-Ciuca, Dan; Melincovici, Carmen; Constantin, Anne-Marie; Mihu, Carmen Mihaela

    2015-01-01

    In recent years, the advances in stem cell research have suggested that the human body may have a higher plasticity than it was originally expected. Until now, four categories of stem cells were isolated and cultured in vivo: embryonic stem cells, fetal stem cells, adult stem cells and induced pluripotent stem cells (hiPSCs). Although multiple studies were published, several issues concerning the stem cells are still debated, such as: the molecular mechanisms of differentiation, the methods to prevent teratoma formation or the ethical and religious issues regarding especially the embryonic stem cell research. The direct differentiation of stem cells into specialized cells: cardiac myocytes, neural cells, pancreatic islets cells, may represent an option in treating incurable diseases such as: neurodegenerative diseases, type I diabetes, hematologic or cardiac diseases. Nevertheless, stem cell-based therapies, based on stem cell transplantation, remain mainly at the experimental stages and their major limitation is the development of teratoma and cancer after transplantation. The induced pluripotent stem cells (hiPSCs) represent a prime candidate for future cell therapy research because of their significant self-renewal and differentiation potential and the lack of ethical issues. This article presents an overview of the biological advances in the study of stem cells and the current progress made in the field of regenerative medicine.

  12. Biological Therapies for Rheumatoid Arthritis : Progress to Date

    NARCIS (Netherlands)

    Malviya, Gaurav; Salemi, Simonetta; Lagana, Bruno; Diamanti, Andrea Picchianti; D'Amelio, Raffaele; Signore, Alberto

    2013-01-01

    Biologic drugs for the management of rheumatoid arthritis (RA) have revolutionized the therapeutic armamentarium with the development of several novel monoclonal antibodies, which include murine, chimeric, humanized, fully human antibodies and fusion proteins. These biologics bind to their targets w

  13. Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This reports reports the progress/efforts performed on six technical projects: 1. systematic assessment of the state of hazardous waste clean-up technologies; 2. site remediation technologies (SRT):drain- enhanced soil flushing for organic contaminants removal; 3. SRT: in situ bio-remediation of organic contaminants; 4. excavation systems for hazardous waste sites: dust control methods for in-situ nuclear waste handling; 5. chemical destruction of polychlorinated biphenyls; and 6. development of organic sensors: monolayer and multilayer self-assembled films for chemical sensors.

  14. Kaldor’s ‘technical progress function’ and Verdoorn’s law revisited

    OpenAIRE

    McCombie, John S. L.; Spreafico, Marta R. M.

    2015-01-01

    This is the accepted manuscript of a paper published in the Cambridge Journal of Economics (McCombie JSL, Spreafico MRM, Cambridge Journal of Economics, 2015, doi:10.1093/cje/bev030). The final version is available at http://dx.doi.org/10.1093/cje/bev030 Kaldor put forward his technical progress function as an alternative to the neoclassical aggregate production function. It is shown that Verdoorn?s law is its empirical counterpart, although allowing for increasing returns to scale. Howeve...

  15. Monthly technical progress report, 29 January 1996--25 Februray 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This report discusses the technical progress made on the radioisotope thermoelectric generators and ancillary activities for the Cassini space probe mission to the planet Saturn. The probe is designated for launch in October of 1997. This report covers the project reporting period from 29 January 1996 through 25 February 1996. The report is organized by program task structure and includes activities for: spacecraft integration and liason; engineering support; safety; qualified unicouple production; ETG fabrication, assembly, and testing; RTG shipping and launch support; designs, reviews and mission applications; quality assurance, reliability and contract changes; and CAGO acquisition.

  16. Volatiles combustion in fluidized beds. [Quarterly] technical progress report, 4 December 1994--4 March 1995

    Energy Technology Data Exchange (ETDEWEB)

    Pendergrass II, R.A.; Mansker, L.D.; Hesketh, R.P.

    1995-08-01

    The goal of this project is to investigate the conditions in which volatiles will bum within both the dense and freeboard regions of fluidized beds. Experiments using a fluidized bed operated at incipient fluidization are being conducted to characterize the effect of particle surface area, initial fuel concentration, and particle type on the inhibition of volatiles within a fluidized bed. The work conducted during the period 4 December, 1994 through, 3 March 1995 is presented in this technical progress report. The research consists of the application of a detailed chemical kinetics model for propane combustion and planned improvements in the experimental system.

  17. Research Progression on Biological Mechanism of Post-stroke Depression

    Institute of Scientific and Technical Information of China (English)

    Lin Facai; Huang Dehong

    2014-01-01

    The biological mechanism of post-stroke depression (PSD) is still unclear. However, there are two hypothesises including primary endogenous mechanism and reactive mechanism. This study mainly reviewed the biological mechanism of PSD from the aspects of neuroanatomy, neurotransmitter, neuroendocrinology, inlfammatory response, neurtrophin and neuropeptide.

  18. Biological therapies for rheumatoid arthritis: progress to date.

    Science.gov (United States)

    Malviya, Gaurav; Salemi, Simonetta; Laganà, Bruno; Diamanti, Andrea Picchianti; D'Amelio, Raffaele; Signore, Alberto

    2013-08-01

    Biologic drugs for the management of rheumatoid arthritis (RA) have revolutionized the therapeutic armamentarium with the development of several novel monoclonal antibodies, which include murine, chimeric, humanized, fully human antibodies and fusion proteins. These biologics bind to their targets with high affinity and specificity. Since 1998, nine different biologics have been approved by the US Food and Drug Administration (FDA) and European Medicines Agency (EMA) for the treatment of RA, and several others are in different stages of clinical trials. This field is in continuous evolution and new biologics are tested every year. Therefore a precise analysis is required in order to have a detailed and updated state of the art of this field. In this review, our main aim is to analyse all available biological therapies that are FDA and EMA approved for the treatment of RA and also those that are in clinical trials for the management of RA patients.

  19. Advancement of flash hydrogasification. Quarterly technical progress report, January-March 1984

    Energy Technology Data Exchange (ETDEWEB)

    Falk, A.Y.

    1984-06-25

    This first quarterly report documents technical progress during the period 31 December 1983 through 30 March 1984. The technical effort is 17 months in duration and is divided into two major technical tasks: Task VII, Hardware Fabrication and PDU Modifications, and Task VIII, Performance Testing. The design of test hardware and process development unit modifications had been previously completed as part of Task VI of the current contract. Task VII involves the fabrication of test hardware and modification of an existing 1-ton/h hydroliquefaction PDU at Rockwell's facilities for use as a hydrogasifier test facility. During this report period, fabrication of the test hardware and modifications to the PDU were initiated. Test hardware fabrication is now approximately 80% complete and should be completed by the end of May 1984. PDU modifications are progressing well and should be completed by the end of June 1984. The completed test hardware fabrication and PDU modifications will allow the conduct of short duration (1 to 2 h) hydrogasification tests along with preburner assembly performance evaluation tests in order to fulfill the test program objectives. Separate supplies of hydrogen, oxygen, methane, carbon monoxide, and water (for steam generation) are provided for this purpose. The modified facility is designed to accommodate both 10- and 20-ft-long hydrogasifier reactors so that residence times will be in the range of 2 to 6 s when coal is fed at a nominal 1/2 ton/h into reactors at 1000 psia pressure. Provisions are being made for real-time analysis of the product gases using an on-line gas chromatograph system. Test planning was the only Task VIII effort active during this report period. An initial (preliminary) test matrix has been defined. Preparation of a data analysis plan is underway, and data reduction programs are being programmed. 17 references, 25 figures, 6 tables.

  20. Bio-logic builder: a non-technical tool for building dynamical, qualitative models.

    Directory of Open Access Journals (Sweden)

    Tomáš Helikar

    Full Text Available Computational modeling of biological processes is a promising tool in biomedical research. While a large part of its potential lies in the ability to integrate it with laboratory research, modeling currently generally requires a high degree of training in mathematics and/or computer science. To help address this issue, we have developed a web-based tool, Bio-Logic Builder, that enables laboratory scientists to define mathematical representations (based on a discrete formalism of biological regulatory mechanisms in a modular and non-technical fashion. As part of the user interface, generalized "bio-logic" modules have been defined to provide users with the building blocks for many biological processes. To build/modify computational models, experimentalists provide purely qualitative information about a particular regulatory mechanisms as is generally found in the laboratory. The Bio-Logic Builder subsequently converts the provided information into a mathematical representation described with Boolean expressions/rules. We used this tool to build a number of dynamical models, including a 130-protein large-scale model of signal transduction with over 800 interactions, influenza A replication cycle with 127 species and 200+ interactions, and mammalian and budding yeast cell cycles. We also show that any and all qualitative regulatory mechanisms can be built using this tool.

  1. Recent progress in biological activities of synthesized phenothiazines.

    Science.gov (United States)

    Pluta, Krystian; Morak-Młodawska, Beata; Jeleń, Małgorzata

    2011-08-01

    This review summarizes recent medicinal chemistry investigations in vitro and in vivo in search for new phenothiazines of promising biological activities. New phenothiazine derivatives (over 50 main structures) contain dialkylaminoalkyl, cycloaminoalkyl and aminoalkyl substituents and their acyl and sulfonyl derivatives, and other substituents with varied the monocyclic (pyrazole, thiazole, oxadiazole, thiadiazole, tetrazole) and bicyclic (quinolizine, pyrazolopyrimidine, thiazolopyridine, azabicyclononane and spiro[chromanpyrimidine] heterocycles linked directly or via the alkyl chain with the thiazine nitrogen atom or with the benzene ring. The modifications of the tricyclic ring system with the bicyclic homoaromatic ring (naphthalene) and monocyclic and bicyclic azine rings (pyridine, pyrimidine, pyrazine and quinoline) led to compounds of significant biological activities. Recently obtained phenothiazines exhibit promising antibacterial, antifungal, anticancer, antiviral, anti-inflammatory, antimalarial, antifilarial, trypanocidal, anticonvulsant, analgesic, immunosuppressive and multidrug resistance reversal properties. These activities were the results of the actions of phenothiazines on biological systems via the interaction of the pharmacophoric substituent (in some cases of strict length), via the interaction of the multicyclic ring system (π-π interaction, intercalation in DNA) and via the lipophilic character allowing the penetration through the biological membranes. The activities were examined by using various biological systems such as cell lines, bacteria, viruses, parasites, laboratory mice, rats and rabbits, and monolayer and bilayer membranes. Some mechanisms of the actions are discussed. This review shows current tendency in the phenothiazine synthesis (without synthetic routes) and reveals the phenothiazine core to be very potent pharmacophoric moiety which can be a rich source of new compounds having desirable biological activities.

  2. Power systems development facility. Quarterly technical progress report, January 1, 1994--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This quarterly technical progress report summarizes work completed during the last quarter of the Second Budget Period, January 1 through March 31, 1994, entitled {open_quotes}Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.{close_quotes} The objective of this project is to evaluate hot gas particulate control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

  3. Quarterly technical progress report, October-December 1982 on Energy Conversion Research and Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    In this quarterly technical progress report, UTSI reports on the continued design work for the low mass flow train superheater. The detailed design of this component continued and the overall arrangement drawing for the superheater and air heater was finalized. The air heater procurement reached the point of contract award, but the actual purchase order award was held up pending receipt of additional funding from the Department of Energy. Testing activity reported includes two additional tests in the LMF1C series, which concludes this test series. Test data are presented, along with preliminary analyses for the combustor, nozzle, diagnostic channel, diffuser, radiant furnace/secondary combustor and Materials Test Module. In addition to the nitrogen oxide test measurements, corrosion and erosion rates for the boiler tube specimens and the materials test module are reported.

  4. MHD Integrated Topping Cycle Project. Seventeenth quarterly technical progress report, August 1, 1991--October 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  5. MHD air heater technology development. Annual technical progress report, January 1, 1980-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    Progress on the technology development of the directly-fired high temperature air heater (HTAH) for MHD power plants is described in detail. The objective of task 1 is to continue development of ceramic materials technology for the directly-fired HTAH. The objectives of task 2 are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. The objectives of task 3 are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. (WHK)

  6. Solar heating and hot water system for the central administrative office facility. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-01

    Progress on the solar heating and hot water system for the central administrative office facility of the Lincoln Housing Authority, Lincoln, NE is covered. An acceptance test plan is presented and the results of the test are tabulated. A complete blueprint of the system as built is provided. The monitoring system is drawn and settings and installation are described. An operation and maintenance manual discusses procedures for start up, shut down and seasonal changeover and include a valve list and pictures and specifications of components and materials used. Photographs of the final installation are included, and technical data and performance data are given. Finally, there is a brief description of system design and operation and a discussion of major maintenance problems encountered and their solutions. (LEW)

  7. Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-15

    The principal objective of the work is to identify an economically viable alternative to the existing method of meeting the energy requirements of citrus fruit processing that will substantially reduce the overall energy usage of citrus processing plants. The components which will make up the alternative systems include: evaporators, dryers, refrigeration units, heat pumps, heat engines, heat exchangers, thermal storage units, and ancillary components. These components will be used to form the five operational units of the citrus processing plant. These operational units are: evaporation, drying, refrigeration, pasteurizing and canning, and the plant electrical load that consists of operations such as conveying and juice extraction. The five operational units are then interrelated to varying degrees with respect to energy exchange to form different types of alternative systems. The approach, work plan, and progress of technical work are summarized. (MCW)

  8. Redwood Community Action Agency: Technical progress report, 3rd quarter, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    Since the second quarter, at which time venture feasibility activities were well underway by Redwood Community Action Agency (RCAA) to develop a shared-savings energy business plan, significant progress has been made. Nearly all consultant reports on the technical feasibility analysis have been completed, initial market research has begun and capitalization strategy has been investigated. Additionally, RCAA received an award of a substantial grant from the California Dept. of Economic Opportunity to develop a series of business ventures with a consortium of Northern California community providers. Fifteen thousand dollars of equity capital has been allocated for the energy-related business venture being investigated under this grant. If all plans go as anticipated, this money, combined with agency unrestricted funds, will provide the initial seed capital for the venture.

  9. Sonic enhanced ash agglomeration and sulfur capture. Technical progress report: January 1993--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This 15th Quarterly Technical Progress Report presents the results of work accomplished during the period January 4, 193 through March 28, 1993 under Contract No. DE-AC21-88MC26288 entitled {open_quotes}Sonic Enhanced Ash Agglomeration and Sulfur Capture.{close_quotes} The fundamental studies conducted by West Virginia University and Pennsylvania State University are provided in subsections of this report. Shakedown testing continued through this period resulting in a series of required modifications for the coal-feed system, coal injector, installation of a water-cooling jacket at the bottom of the agglomeration chamber, and finally, the installation of an additional flow sensor and rate meter. Coal-fired bimodal tests were initiated at the end of the period. The unit was run at 2 atm pressure for 3 hours with steady-state operation for 2 hours. Then, the pressure was increased to 3 atm with steady-state operation for 2 hours.

  10. Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-15

    The Sunkist Citrus Plant in Ontario, California, processes about 6 million pounds of citrus fruit per day to make products which include frozen concentrated juice; chilled, pasteurized, natural strength juice; molasses from peel; dried meal from peel; pectin; citrus oil; and bioflavonoids. The energy intensive operations at the plant include concentration, drying, and refrigeration. The objective of the two-year two-phase project is to identify an economically viable alternative to the existing method of meeting energy requirements. Progress on the technical work of Phase I is reported. The following are summarized: requirements (energy price projection, atmospheric emission requirements, citrus juice quality constraints, economic evaluations); characterization (basic citrus processing operations, energy consumption and fruit processed vs time, identification and measurement of energy uses, energy balance for a typical citrus juice evaporator); and thermodynamic analysis (heat pump model, thermal evaporator, and co-generation model).

  11. Spray forming -- Aluminum: Third annual report (Phase 2). Technical progress -- Summary

    Energy Technology Data Exchange (ETDEWEB)

    Kozarek, R.L.

    1998-04-20

    Commercial production of aluminum sheet and plate by spray atomization and deposition is a potentially attractive manufacturing alternative to conventional ingot metallurgy/hot-milling and to continuous casting processes because of reduced energy requirements and reduced cost. To realize the full potential of the technology, the Aluminum Company of America (Alcoa), under contract by the US Department of Energy, is investigating currently available state-of-the-art atomization devices to develop nozzle design concepts whose spray characteristics are tailored for continuous sheet production. This third technical progress report will summarize research and development work conducted during the period 1997 October through 1998 March. Included are the latest optimization work on the Alcoa III nozzle, results of spray forming runs with 6111 aluminum alloy and preliminary rolling trials of 6111 deposits.

  12. Bio-Logic Builder: A Non-Technical Tool for Building Dynamical, Qualitative Models

    Science.gov (United States)

    Helikar, Tomáš; Kowal, Bryan; Madrahimov, Alex; Shrestha, Manish; Pedersen, Jay; Limbu, Kahani; Thapa, Ishwor; Rowley, Thaine; Satalkar, Rahul; Kochi, Naomi; Konvalina, John; Rogers, Jim A.

    2012-01-01

    Computational modeling of biological processes is a promising tool in biomedical research. While a large part of its potential lies in the ability to integrate it with laboratory research, modeling currently generally requires a high degree of training in mathematics and/or computer science. To help address this issue, we have developed a web-based tool, Bio-Logic Builder, that enables laboratory scientists to define mathematical representations (based on a discrete formalism) of biological regulatory mechanisms in a modular and non-technical fashion. As part of the user interface, generalized “bio-logic” modules have been defined to provide users with the building blocks for many biological processes. To build/modify computational models, experimentalists provide purely qualitative information about a particular regulatory mechanisms as is generally found in the laboratory. The Bio-Logic Builder subsequently converts the provided information into a mathematical representation described with Boolean expressions/rules. We used this tool to build a number of dynamical models, including a 130-protein large-scale model of signal transduction with over 800 interactions, influenza A replication cycle with 127 species and 200+ interactions, and mammalian and budding yeast cell cycles. We also show that any and all qualitative regulatory mechanisms can be built using this tool. PMID:23082121

  13. Dissecting Biology of Solid Tumour: The Microenvironment and Cancer Progression

    OpenAIRE

    2013-01-01

    Focus on cancer therapy is experiencing a major paradigm shift from ways of attacking tumor cells to a strategy for specifically targeting the tumor microenvironment (TME). This approach requires a comprehensive understanding of roles of each component of the tumor environment. A description of the tumor microenvironment and its impact on tumor progression is presented here. Available studies indicate that both tumor/epithelial and stroma characteristics play important roles in cancer progres...

  14. Concept of Biological Progress and Information as Indication and Measure of Ontic Growth

    Directory of Open Access Journals (Sweden)

    Tonci Kokic

    2004-12-01

    Full Text Available The history of the idea of biological progress shows that it is not a selfexplanatory category, so a clear definition is required. Biological progress exists if: (1 “more progressive” is defined as “more complex” – in that case evolution is synonymous with progress, i.e. development from simple to complex, from homogeneous to heterogeneous; (2 we perceive the expression “more progressive” as more successful in relation to the environment, in these terms some groups in the history of life were more progressive because/so that they survived, while others were retrogressive or less progressive because/so that they died out; on the other hand, within their ecological niches, certain forms of life (species are perfectly adapted to their environment as long as it is stable (along these lines, mammals are no more progressive than bacteria; (3 we take the span or reach of a potential adaptation of populations as a measure (in which case differences exist. However, there is no active, innovative problem solving in relation to the environment either with plants or animals – only the variability mechanism / selection is in place, automatism, instinct. In the light of the above-mentioned biological criteria, man is the most complex living creature by his constitution (central nervous system, he is the least dependent on the environment and can be innovative in relation to the environment. Man is the only living creature capable of establishing an active relationship with the environment through his special tool – culture. Considering the level of organization and quantity of information, the mammal genome is more progressive than the bacterium genome, while the human genome comprises most information which makes man the most progressive living thing. We can talk about biological progress if we define progressiveness as advancement toward complexity of organisation, but sometimes the simplification of structure enables survival. It seems

  15. MHD Integrated Topping Cycle Project. Fourteenth quarterly technical progress report, November 1, 1990-- January 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  16. [Experience of the development special medical technical laboratory for studies of effects caused by potent electromagnetic radiation in biologic objects].

    Science.gov (United States)

    Gorodetsky, B N; Kalyada, T V; Petrov, S V

    2015-01-01

    This article covers topics of creating special medical technical laboratory for medial and biologic studies concerning influence of potent high-frequency elecromagnetic radiation on various biologic objects. The authors gave example of such laboratory, described its construction features, purpose and main characteristics of the included devices.

  17. Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bender, W.

    2013-01-01

    Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

  18. Molecular biological determinations of meningioma progression and recurrence.

    Directory of Open Access Journals (Sweden)

    Stefan Linsler

    Full Text Available Meningiomas are tumors that arise from the coverings of the brain or spinal cord. 5% of the cases turn into malignant forms with aggressive clinical behavior and increased risk of tumor recurrence. One hundred and five patients with meningiomas were operated by open surgery. To investigate predictors of meningioma recurrence in total 124 samples of 105 patients were investigated by iFISH. Dual-probe hybridization was performed to access chromosomal alterations of chromosomes 1p-, 9p- and 22q. Additionally, methylation of TIMP3 and p16 was analyzed with MS-PCR. Of the 105 investigated tumors 59.1% (62/105 were WHO grade I, 33.3% (35/105 were WHO grade II and 7.7% (8/105 were anaplastic meningiomas (grade III, respectively. The histopathological data correlates with the recurrence rate of the investigated meningiomas. Hypermethylation of TIMP3 was detected in 13.3% of all meningiomas: 10.9% in WHO grade I meningiomas, 25.0% in grade II and 14.3% in grade III meningiomas, respectively. No correlation of TIMP3 hypermethylation with tumor recurrence or WHO grade (p = 0.2 was observed. Interestingly, deletion of 1p36 emerged as a significant predictor of shorter overall survival (log rank test, p<0.001, whereas TIMP3 promoter methylation had no significant effect on overall survival (log rank test, p = 0.799. The results of the current study support the finding that the deletion of chromosome 1p is an independent marker of meningioma recurrence and progression (p = 0.0097. Therefore the measurement of genetic aberrations in meningiomas allows in a combined histological approach a more precise assessment of the prognosis of meningiomas than histopathology alone.

  19. Technical Progress of Rubber Additives%橡胶助剂技术进展

    Institute of Scientific and Technical Information of China (English)

    齐琳; 梁诚

    2013-01-01

    In this review, the development and application of rubber additives are presented, including antioxidant 4030, antioxidant 4050, accelerator TBSI and TBZTD, anti-reversion agent Perkalink900, peptizer, homogenizing agent and resorcinol resin. The technical progress of production processes of several rubber additives is reviewed, for example, 4-aminodiphenylamine from nitrobenzene, antioxidant DTPD from mixed amine, and thiazole accelerators through clean process. The growth of China rubber additive industry relies strongly on continuous technological innovation.%介绍防老剂4030和4050等防护体系助剂,促进剂TBSI和TBZTD、抗硫化返原剂Perkalink900等硫化体系助剂,以及塑解剂、均匀剂、间苯二酚树脂等加工助剂的开发和应用。综述对氨基二苯胺硝基苯法工艺、混合胺合成防老剂DTPD工艺、噻唑类促进剂清洁工艺等进展。我国橡胶助剂工业应不断科技创新,才能够做大做强。

  20. MHD Integrated Topping Cycle Project. Sixteenth quarterly technical progress report, May 1991--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990`s, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  1. MHD air heater development technology. Technical progress report, April 1, 1980-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    Technology development for the directly-fired high temperature air heater (HTAH) for MHD power plants is described. Work is being done under three tasks as described in the following. (1) materials selection, evaluation, and development: The objective of this task is to continue development of ceramic materials technology for the directly-fired HTAH. The scope of the work will include compilation of materials data, materials selection for testing and design studies, materials property determination, liaison with refractory manufacturers and other organizations to encourage development of materials and fabrication technology, establishment of preliminary HTAH material specifications, analyses of test materials, and development of criteria for thermal stress limits for crack-tolerant refractory materials. (2) operability, performance, and materials testing: The objectives of this task are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. (3) full-scale design concepts: The objectives of this task are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. Progress is described. (WHK)

  2. Advanced Coal Conversion Process Demonstration Project. Technical progress report, January 1, 1993--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from January 1, 1993, through December 31, 1993. This project demonstrates an advanced, thermal, coal drying process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low- rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal{reg_sign} process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal processing, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal. Rosebud SynCoal Partnership`s ACCP Demonstration Facility entered Phase III, Demonstration Operation, in April 1992 and operated in an extended startup mode through August 10, 1993, when the facility became commercial. Rosebud SynCoal Partnership instituted an aggressive program to overcome startup obstacles and now focuses on supplying product coal to customers. Significant accomplishments in the history of the SynCoal{reg_sign} process development are shown in Appendix A.

  3. PFBC HGCU Test Facility. Technical progress report No. 24, Third quarter, CY 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This is the twenty-fourth and final Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the work completed during the Third Quarter of CY 1995. All activity this quarter was directed toward the completion of the program final report. A draft copy of the final report was forwarded to DOE during this quarter, and DOE submitted their comments on the report to AEPSC. DOE requested that Westinghouse write an appendix to the report covering the performance of the fail-safe regenerator devices during Tad operation, and Westinghouse subsequently prepared the appendix. Additional DOE comments were incorporated into the report, and it will be issued in camera-ready form by the end of October, 1995, which is the program end date. Appendix 1 presents the results of filter candle posttest examination by Westinghouse performed on selected filter candles following final shutdown of the system.

  4. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, April 1--June 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Brandes, S.D.; Lancet, M.S.; Robbins, G.A.; Winschel, R.A.; Burke, F.P.

    1992-11-01

    This is the eleventh Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Major topics reported are: (1) The results of a study designed to determine the effects of the conditions employed at the Wilsonville slurry preheater vessel on coal conversion is described. (2) Stable carbon isotope ratios were determined and used to source the carbon of three product samples from Period 49 of UOP bench-scale coprocessing Run 37. The results from this coprocessing run agree with the general trends observed in other coprocessing runs that we have studied. (3) Microautoclave tests and chemical analyses were performed to ``calibrate`` the reactivity of the standard coal used for determining donor solvent quality of process oils in this contract. (4) Several aspects of Wilsonville Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) resid conversion kinetics were investigated; results are presented. Error limits associated with calculations of deactivation rate constants previously reported for Runs 258 and 261 are revised and discussed. A new procedure is described that relates the conversions of 850{degrees}F{sup +} , 1050{degrees}F{sup +}, and 850 {times} 1050{degrees}F material. Resid conversions and kinetic constants previously reported for Run 260 were incorrect; corrected data and discussion are found in Appendix I of this report.

  5. Jointly sponsored research program quarterly technical progress report, January--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    Progress reports are presented for the following tasks: Development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation, and product market study; impact of leachate from clean coal technology waste on the stability of clay liners; investigation of coprocessing of heavy oil, automobile shredder residue, and coal; injection into coal seams for simultaneous CO{sub 2} mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC coke process; chemical sensor and field screening technology development; demonstration of the Koppelman ``Series C`` Power River Basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid-state NMR analysis and interpretation of naturally and artificially matured kerogens; Crow{trademark} field demonstration with Bell Lumber and Pole; ``B`` series pilot plant tests; and in-situ treatment of manufactured gas plant contaminated soils demonstration program.

  6. Critical contributions in MHD power generation. Quarterly technical progress report, December 1, 1977-February 28, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1978-03-01

    Research and development in open-cycle coal-fired MHD power generation is described. The scope and objectives of the MIT program are: (1) establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) develop combustion data pertinent to the design of MHD combustors; (4) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (5) establish the operating characteristics of an MHD disk generator; (6) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) integrate the engineering data and design criteria, as applicable, which are developed in the listed tasks into a model of the MHD channel; (8) participate in the US/USSR Cooperative Program in MHD Power Generation; and (9) participate in technical support of the DOE MHD Project Office. Progress in each of these areas is reported. (WHK)

  7. Critical contributions in MHD power generation. Quarterly technical progress report, September 1--November 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1977-12-01

    Research and development in open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology (MIT) is summarized. Progress is reported on the following tasks: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) develop combustion data pertinent to the design of MHD combustors; this work is intended to determine the combustion characteristics of selected coal feedstock in terms of devolatilization kinetics, char characteristics, and combustion gas chemistry; (4) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (5) establish the operating characteristics of an MHD disk generator; (6) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel; (8) participate in technical support of the DOE MHD Project Office.

  8. Technical Progress of Domestic Iron & Steel Industry and Its Influence on the Development of Refractories

    Institute of Scientific and Technical Information of China (English)

    XINGShouwei; LIUJiehua

    2001-01-01

    The quick increase of domestic iron and steel output,the great improvement of steel quality and variety,the improtation of advanced equipment and the diminution and elimination of some backward technology and facilities have brought about great influence on the development of refracetories.In order to meet the technical progress of iron and steel industry,domestic refractories industry has,in the last industry,domestic refractories industry has,in the last decades ,concentrated its efforts on the development and production of new Sialon bonded SiC bricks and micropore carbon blocks for giant blast furnaces;new refractories for coke oven and non-coke iron making furnaces;MgO-C bricks for converters and electric conductive refractories for UHP EAF;refractories for slag splashing technology;and the highy technology-intensive refractories for continuous casting facilities.The paper reviews the great change occurred in the industries of iron-and steel-making and refratories during the last decaldes.

  9. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, January 1--March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Robbins, G.A.; Brandes, S.D.; Winschel, R.A.; Burke, F.P.

    1992-08-01

    This is the tenth Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Process oils from Wilsonville Run 262 were analyzed to provide information on process performance. Run 262 was operated from July 10 through September 30, 1991, in the thermal/catalytic Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) configuration with ash recycle. The feed coal was Black Thunder Mine subbituminous coal. The high/low temperature sequence was used. Each reactor was operated at 50% of the available reactor volume. The interstage separator was in use throughout the run. The second-stage reactor was charged with aged Criterion 324 catalyst (Ni/Mo on 1/16 inch alumina extrudate support). Slurry catalysts and sulfiding agent were fed to the first-stage reactor. Molyvan L is an organometallic compound which contains 8.1% Mo, and is commercially available as an oil-soluble lubricant additive. It was used in Run 262 as a dispersed hydrogenation catalyst precursor, primarily to alleviate deposition problems which plagued past runs with Black Thunder coal. One test was made with little supported catalyst in the second stage. The role of phenolic groups in donor solvent properties was examined. In this study, four samples from direct liquefaction process oils were subjected to O-methylation of the phenolic groups, followed by chemical analysis and solvent quality testing.

  10. MHD Integrated Topping Cycle Project. Sixteenth quarterly technical progress report, May 1991--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990`s, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  11. Effect of biologic therapy on radiological progression in rheumatoid arthritis: what does it add to methotrexate?

    Directory of Open Access Journals (Sweden)

    Jones G

    2012-07-01

    Full Text Available Graeme Jones, Erica Darian-Smith, Michael Kwok, Tania WinzenbergMenzies Research Institute, University of Tasmania, Tasmania, AustraliaAbstract: There have been substantial advances in the treatment of rheumatoid arthritis in recent years. Traditional disease-modifying antirheumatic drugs (DMARDs have been shown to have small effects on the progression of radiographic damage. This quantitative overview summarizes the evidence for biologic DMARDS and radiographic damage either alone or in combination with methotrexate. Two outcomes were used (standardized mean difference and odds of progression. A total of 21 trials were identified of which 18 had useable data. For biologic monotherapy, tocilizumab, adalimumab, and etanercept were significantly better than methotrexate, with tocilizumab ranking first in both outcomes while golimumab was ineffective in both outcomes. For a biologic in combination with methotrexate compared with methotrexate alone, most therapies studied (etanercept, adalimumab, infliximab, certolizumab, tocilizumab, and rituximab were effective at slowing X-ray progression using either outcome, with infliximab ranking first in both outcomes. The exceptions to this were golimumab (no effect on standardized mean difference and abatacept (no effect on odds of progression. This effect was additional to methotrexate; thus, the overall benefit is moderate to large in magnitude, which is clearly of major clinical significance for sufferers of rheumatoid arthritis and supports the use of biologic DMARDs in those with a poor disease prognosis.Keywords: rheumatoid, trials, meta-analysis, radiographs, biologic, disease-modifying antirheumatic drugs, DMARDs

  12. PFBC HGCU test facility technical progress report. First Quarter, CY 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This is the eighteenth Technical Progress Report submitted in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. During this quarter, the Tidd Hot Gas Clean Up System operated for 835 hours during six separate test runs. The system was starting into a seventh run at the end of the quarter. Highlights of this period are summarized below: the longest run during the quarter was approximately 333 hours; filter pressure drop was stable during all test runs this quarter using spoiling air to the primary cyclone upstream of the Advanced Particle Filter (APF); the tempering air system was commissioned this quarter which enabled the unit to operate at full load conditions while limiting the gas temperature in the APF to 1,400 F; during a portion of the one run, the tempering air was removed and the filter operated without problems up to 1,450 F; ash sampling was performed by Battelle personnel upstream and downstream of the APF and ash loading and particle size distribution data were obtained, a summary report is included; a hot area on the APF head was successfully repaired in service; a hot spot on the top of an expansion joint was successfully repaired by drilling holes from the inside of the pipe and pumping in refractory insulation; a corrosion inspection program for the HGCU system was issued giving recommendations for points to inspect; filter internal inspections following test runs 13 and 17 revealed a light coating (up to 1/4 inch thick) of residual ash on the candles and some ash bridging between the dust sheds and inner rows of candles. Data from these inspections are included with this report.

  13. Power systems development facility. Quarterly technical progress report, July 1--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This quarterly technical progress report summarizes work completed during the Second Quarter of the Second Budget Period, July 1 through September 30, 1993, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scaleup of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. Hot Gas Cleanup Units to mate to all gas streams; Combustion Gas Turbine; and Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility.

  14. Advanced Coal Conversion Process Demonstration Project. Final technical progress report, January 1, 1995--December 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from January 1, 1995 through December 31, 1995. This project demonstrates an advanced, thermal, coal upgrading process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal Process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal upgrading, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal. The SynCoal Process enhances low-rank, western coals, usually with a moisture content of 25 to 55 percent, sulfur content of 0.5 to 1.5 percent, and heating value of 5,5000 to 9,000 British thermal units per pound (Btu/lb), by producing a stable, upgraded, coal product with a moisture content as low as 1 percent, sulfur content as low as 0.3 percent, and heating value up to 12,000 Btu/lb. During this reporting period, the primary focus for the ACCP Demonstration Project team was to expand SynCoal market awareness and acceptability for both the products and the technology. The ACCP Project team continued to focus on improving the operation, developing commercial markets, and improving the SynCoal products as well as the product`s acceptance.

  15. Instrumentation of dynamic gas pulse loading system. Technical progress report, first quarter 1992

    Energy Technology Data Exchange (ETDEWEB)

    Mohaupt, H.

    1992-04-14

    The overall goal of this work is to further develop and field test a system of stimulating oil and gas wells, which increases the effective radius of the well bore so that more oil can flow into it, by recording pressure during the gas generation phase in real time so that fractures can be induced more predictably in the producing formation. Task 1: Complete the laboratory studies currently underway with the prototype model of the instrumentation currently being studied. Task 2: Perform field tests of the model in the Taft/Bakersfield area, utilizing operations closest to the engineers working on the project, and optimize the unit for various conditions encountered there. Task 3: Perform field test of the model in DGPL jobs which are scheduled in the mid-continent area, and optimize the unit for downhole conditions encountered there. Task 4: Analyze and summarize the results achieved during the complete test series, documenting the steps for usage of downhole instrumentation in the field, and compile data specifying use of the technology by others. Task 5: Prepare final report for DOE, and include also a report on the field tests completed. Describe and estimate the probability of the technology being commercialized and in what time span. The project has made substantial technical progress, though we are running about a month behind schedule. Expenditures are in line with the schedule. Increased widespread interest in the use of DGPL stimulation has kept us very busy. The computer modeling and test instrumentation developed under this program is already being applied to commercial operations.

  16. Critical contributions in MHD power generation. Quarterly technical progress report, December 1, 1976--February 28, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1977-08-01

    Research progress in open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology (MIT) is reported. The scope and objectives of the MIT program are to: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) establish basic mechanical properties to guide detail design and fabrication of high field strength superconducting magnets for MHD applications; (3) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (4) develop combustion data pertinent to the design of MHD combustors; (5) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (6) establish the operating characteristics of an MHD disk generator; (7) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (8) integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel; (9) Participate in technical support of the ERDA MHD Project Office; (10) participate in the US/USSR Cooperative Program in MHD Power Generation. (11) During the summer of 1976, a short-term task in U-25 electrode screening was temporarily added to the scope of the contract. This effort involved screening tests, in the MIT MHD simulation facility of electrode modules and configurations intended for tests in the Soviet U-25 generator.

  17. Development of a solar desiccant dehumidifier. Volume 1. Summary. Volume 2. Detailed technical information. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Gunderson, M.E.; Hwang, K.C.; Railing, S.M.

    1978-03-31

    Research and development work aimed at the development of a solar desiccant dehumidifier is described in detail. The system features a rotary bed of granular silica gel and a rotary regenerator. The dehumidifier can be used for air conditioning through adiabatic saturation of the process airstream. Detailed technical information is presented in the appendices: (A) management, (B) review of the literature: state-of-the-art survey and SERI meeting, (C) review of the literature: adsorbent survey, (D) design requirements and evaluation criteria, (E) design requirements and evaluation criteria, single-family house model, (F) design requirements and evaluation criteria, economic model, (G) design requirements and evaluation criteria: conventional system models for comparison, (H) candidate cooling subsystems, (I) subsystem computer model, (J) subsystem performance map, and (K) subsystem preliminary design. (WHK)

  18. Savannah River Plant, Works Technical Department monthly progress report for March 1956

    Energy Technology Data Exchange (ETDEWEB)

    None

    1956-04-18

    This document details activities of the Works Technical Department during the month of March 1956. It covers reactor technology, separations technology, engineering assistance and heavy water technology.

  19. Reconstructing the Temporal Progression of Biological Data using Cluster Spanning Trees.

    Science.gov (United States)

    Eshleman, Ryan; Singh, Rahul

    2017-02-09

    Identifying the temporal progression of a set of biological samples is crucial for comprehending the dynamics of the underlying molecular interactions. It is often also a basic step in data denoising and synchronization. Finally, identifying the progression order is crucial for problems like cell lineage identification, disease progression, tumor classification, and epidemiology and thus impacts the spectrum of disciplines spanning basic biology, drug discovery, and public health. Current methods that attempt solving this problem face difficulty when it is necessary to factor-in complex relationships within the data such as grouping, partial ordering or bifurcating or multifurcating progressions. We propose the notion of Cluster Spanning Trees (CST) that can model both linear as well as the aforementioned complex progression relationships in temporally evolving data. Through a number of experimental investigations involving synthetic data sets as well as datasets from the cell cycle, cellular differentiation, phenotypic screening, and genetic variation, we show that the proposed CST approach outperforms existing methods in reconstructing the temporal progression of the data.

  20. Hydrogen production by supercritical water gasification of biomass. Phase 1 -- Technical and business feasibility study, technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The nine-month Phase 1 feasibility study was directed toward the application of supercritical water gasification (SCWG) for the economical production and end use of hydrogen from renewable energy sources such as sewage sludge, pulp waste, agricultural wastes, and ultimately the combustible portion of municipal solid waste. Unique in comparison to other gasifier systems, the properties of supercritical water (SCW) are ideal for processing biowastes with high moisture content or contain toxic or hazardous contaminants. During Phase I, an end-to-end SCWG system was evaluated. A range of process options was initially considered for each of the key subsystems. This was followed by tests of sewage sludge feed preparation, pumping and gasification in the SCW pilot plant facility. Based on the initial process review and successful pilot-scale testing, engineering evaluations were performed that defined a baseline system for the production, storage and end use of hydrogen. The results compare favorably with alternative biomass gasifiers currently being developed. The results were then discussed with regional wastewater treatment facility operators to gain their perspective on the proposed commercial SCWG systems and to help define the potential market. Finally, the technical and business plans were developed based on perceived market needs and the projected capital and operating costs of SCWG units. The result is a three-year plan for further development, culminating in a follow-on demonstration test of a 5 MT/day system at a local wastewater treatment plant.

  1. Hydrogen production by supercritical water gasification of biomass. Phase 1 -- Technical and business feasibility study, technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The nine-month Phase 1 feasibility study was directed toward the application of supercritical water gasification (SCWG) for the economical production and end use of hydrogen from renewable energy sources such as sewage sludge, pulp waste, agricultural wastes, and ultimately the combustible portion of municipal solid waste. Unique in comparison to other gasifier systems, the properties of supercritical water (SCW) are ideal for processing biowastes with high moisture content or contain toxic or hazardous contaminants. During Phase I, an end-to-end SCWG system was evaluated. A range of process options was initially considered for each of the key subsystems. This was followed by tests of sewage sludge feed preparation, pumping and gasification in the SCW pilot plant facility. Based on the initial process review and successful pilot-scale testing, engineering evaluations were performed that defined a baseline system for the production, storage and end use of hydrogen. The results compare favorably with alternative biomass gasifiers currently being developed. The results were then discussed with regional wastewater treatment facility operators to gain their perspective on the proposed commercial SCWG systems and to help define the potential market. Finally, the technical and business plans were developed based on perceived market needs and the projected capital and operating costs of SCWG units. The result is a three-year plan for further development, culminating in a follow-on demonstration test of a 5 MT/day system at a local wastewater treatment plant.

  2. Progress towards the Conventionon Biological Diversity terrestrial2010 and marine 2012 targets forprotected area coverage

    DEFF Research Database (Denmark)

    Coad, Lauren; Burgess, Neil David; Fish, Lucy

    2010-01-01

    Protected area coverage targets set by the Convention on Biological Diversity (CBD) for both terrestrial and marine environments provide a major incentive for governments to review and upgrade their protected area systems. Assessing progress towards these targets will form an important component...... of the work of the Xth CBD Conference of Parties meeting to be held in Japan in 2010. The World Database on Protected Areas (WDPA) is the largest assembly of data on the world's terrestrial and marine protected areas and, as such, represents a fundamental tool in tracking progress towards protected area...

  3. Learning Progressions: Tools for Assessment and Instruction for All Learners. Technical Report #1307

    Science.gov (United States)

    Sáez, Leilani; Lai, Cheng-Fei; Tindal, Gerald

    2013-01-01

    Conceptually, learning progressions hold promise for improving assessment and instruction by precisely outlining what students know and don't know at particular stages of knowledge and skill development. Based upon a synthesis of the literature, a rationale for the use of learning progressions maps to clarify how learning progresses in…

  4. Nuclear Physics Laboratory, University of Colorado technical progress report, 1976 and proposal for continuation of contract

    Energy Technology Data Exchange (ETDEWEB)

    1976-11-01

    This report summarizes the work carried out at the Nuclear Physics Laboratory of the University of Colorado during the period November 1, 1975 to November 1, 1976. The low energy nuclear physics section is dominated by light-ion reaction studies which span a wide range. These include both two-neutron and two-proton transfer reactions, charge exchange and inelastic scattering, as well as single nucleon transfer reactions. The nuclei studied vary widely in their mass and characteristics. These reaction studies have been aided by the multi-use scattering chamber which now allows the energy-loss-spectrometer beam preparation system (beam swinger) to shift from charged particle studies to neutron time-of-flight studies with a minimum loss of time. The intermediate energy section reflects the increase in activity accompanying the arrival of LAMPF data and the initiation of (p,d) studies at the Indiana separated-sector cyclotron. The nucleon removal results provided by the ..pi.. beam at EPICS previous to completion of the spectrometer have shown that nuclear effects dominate this process, so that the widely used free interaction picture is inadequate. The section entitled ''Other Activities'' reveals continuing activities in new applications of nuclear techniques to problems in medicine and biology. Reactions important to astrophysics continue to be investigated and our trace-element program remains at a high level of activity. The theoretical section reports new progress in understanding magnitudes of two-step reactions by inclusion of finite-range effects. A new finite-range program which is fast and economical has been completed. Intermediate energy results include calculations of ..pi..-..gamma.. angular correlations, low energy ..pi..-nucleus interactions, as well as (p,d) and nucleon scattering calculations for intermediate energies.

  5. Progress towards the Conventionon Biological Diversity terrestrial2010 and marine 2012 targets forprotected area coverage

    DEFF Research Database (Denmark)

    Coad, Lauren; Burgess, Neil David; Fish, Lucy

    2010-01-01

    coverage targets. National protected areas data from the WDPA have been used to measure progress in protected areas coverage at global, regional and national scale. The mean protected area coverage per nation was 12.2% for terrestrial area, and only 5.1% for near-shore marine area. Variation in protected......Protected area coverage targets set by the Convention on Biological Diversity (CBD) for both terrestrial and marine environments provide a major incentive for governments to review and upgrade their protected area systems. Assessing progress towards these targets will form an important component...... of the work of the Xth CBD Conference of Parties meeting to be held in Japan in 2010. The World Database on Protected Areas (WDPA) is the largest assembly of data on the world's terrestrial and marine protected areas and, as such, represents a fundamental tool in tracking progress towards protected area...

  6. Predictors for the progression of cervical lesion in rheumatoid arthritis under the treatment of biological agents.

    Science.gov (United States)

    Kaito, Takashi; Ohshima, Shirou; Fujiwara, Hiroyasu; Makino, Takahiro; Yonenobu, Kazuo

    2013-12-15

    Retrospective cohort analysis. To clarify the effect of biological agents (BAs) on the development and progression of cervical lesions in patients with rheumatoid arthritis (RA) and to identify biomarkers that accurately predict disease progression. The introduction of BAs changed the paradigm of RA treatment. However, their effects on cervical lesions in patients with RA have not been studied. Ninety-one subjects who had received BAs for 2 years or more were enrolled. Mean radiographical interval was 3.9 years. Disease activity was evaluated by disease activity score-C-reactive protein levels, and matrix metalloproteinase-3 levels. Cervical lesions were defined as an atlantodental interval more than 3 mm for atlantoaxial subluxation (AAS), Ranawat value less than 13 mm for vertical subluxation (VS), and anterior or posterior listhesis more than 2 mm for subaxial subluxation. Disease progression was defined radiographically as an increase in the atlantodental interval more than 2 mm for AAS, a decrease in both Ranawat and Redlund-Johnell values more than 2 mm for VS, and an increase in listhesis more than 2 mm for subaxial subluxation. We used multivariate regression techniques to assess predictors of disease progression. Baseline radiographical evaluation showed no pre-existing cervical lesion in 44 patients, AAS in 29, and VS in 18. Radiological progression occurred in 7% patients without baseline lesions, 79% in the AAS group, and 72% in the VS group. The incidence of progression was significantly lower in patients without lesions at baseline. Multivariate regression analysis demonstrated pre-existing cervical lesions, disease activity score-C-reactive protein levels at baseline and metalloproteinase-3 levels at final visit as good predictors of RA progression. BAs prevented de novo cervical lesions in patients with RA but failed to control progression in patients with pre-existing cervical lesions. Disease activity score-C-reactive protein levels at baseline

  7. Variation of Phenolic Content in Globe Artichoke in Relation to Biological, Technical and Environmental Factors

    Directory of Open Access Journals (Sweden)

    Giovanni Mauromicale

    2011-02-01

    Full Text Available In Italy, globe artichoke production is prevailingly concentrated in the South and islands, where it provides an important contribution to the agricultural economy. In recent years, there has been a renewed interest in this crop as a promising source of polyphenols, a heterogeneous class of secondary metabolites characterized by various healthy properties well-documented in literature. The phenolic fraction, present in the different artichoke plant parts, varies widely in relation to biotic and abiotic factors. Therefore, the present study aimed at evaluating the variation of phenolic content in globe artichoke in relation to biological, technical and environmental factors. Two field-experiments were carried out in Sicily (South Italy in two representative cultivation areas, in order to examine the effects of genotype, head fraction, season conditions, planting density and arrangement on the globe artichoke phenolic concentration. Both the total polyphenols and the individual phenolic compounds detected were notably genotype- dependent. Particularly, the high level of caffeoylquinic acids (chlorogenic acid, among others and apigenin 7- O-glucuronide, reported respectively by “Violetto di Sicilia” and “Romanesco clone C3”, could be used to encourage globe artichoke fresh consumption. Total polyphenols content also resulted more abundant in specific accumulation sites within the inflorescence, such as the floral stem and receptacle, and for most of genotypes it decreased during the second year in response to the different meteorological conditions. Additionally, total polyphenols content significantly and linearly increased as plant density increased from 1.0 to 1.8 plant m-2 and it significantly increased by 13% passing from single to twin rows plant arrangement.

  8. Savannah River Ecology Laboratory, Annual Technical Progress Report of Ecological Research, June 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Paul M. Bertsch, (Director)

    2002-06-30

    The Savannah River Ecology Laboratory (SREL) is a research unit of The University of Georgia (UGA) and has been conducting ecological research on the Savannah River Site (SRS) near Aiken, South Carolina for 50 years. The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts fundamental and applied ecological research, as well as education and outreach programs, under a Cooperative Agreement with the U.S. Department of Energy (DOE). The Laboratory's research mission during the 2002 fiscal year was fulfilled with the publication of 76 journal articles and book chapters by faculty, technical staff, students, and visiting scientists. An additional 50 journal articles have been submitted or are in press. Other noteworthy events took place as faculty members, staff, and graduate students received awards. These are described in the section titled Special Accomplishments of Faculty, Staff, Students, and Administration on page 51. Notable scientific accomplishments include work conducted on contaminant transport, stable isotopes, sandhills ecology, and phytoremediation: (1) A collaborative study between Dr. Tom Hinton at SREL and scientists at SRTC demonstrated the feasibility of using illite clay to sequester 137Cs in sediments along the P and R reactor cooling canal system, where approximately 3,000 acres of land are contaminated. Overall, the study showed significant decreases in cesium concentrations and bioavailability following the addition of illite with no sign of harm to the ecosystem. While the cesium remains sequestered from the biosphere, its radioactivity decays and the process progresses from contaminant immobilization to remediation. (2) SREL's stable isotope laboratory is now fully functional. Stable isotope distributions in nature can provide important insights into many historical and current environmental processes. Dr. Christopher Romanek is leading SREL's research

  9. Technical Stability and Biological Variability in MicroRNAs from Dried Blood Spots: A Lung Cancer Therapy-Monitoring Showcase.

    Science.gov (United States)

    Kahraman, Mustafa; Laufer, Thomas; Backes, Christina; Schrörs, Hannah; Fehlmann, Tobias; Ludwig, Nicole; Kohlhaas, Jochen; Meese, Eckart; Wehler, Thomas; Bals, Robert; Keller, Andreas

    2017-09-01

    Different work flows have been proposed to use miRNAs as blood-borne biomarkers. In particular, the method used for collecting blood from patients can considerably influence the diagnostic results. We explored whether dried blood spots (DBSs) facilitate stable miRNA measurements and compared its technical stability with biological variability. First, we tested the stability of DBS samples by generating from 1 person 18 whole-genome-wide miRNA profiles of DBS samples that were exposed to different temperature and humidity conditions. Second, we investigated technical reproducibility by performing 7 replicates of DBS again from 1 person. Third, we investigated DBS samples from 53 patients with lung cancer undergoing different therapies. Across these 3 stages, 108 genome-wide miRNA profiles from DBS were generated and evaluated biostatistically. In the stability analysis, we observed that temperature and humidity had an overall limited influence on the miRNomes (average correlation between the different conditions of 0.993). Usage of a silica gel slightly diminished DBS' technical reproducibility. The 7 technical replicates had an average correlation of 0.996. The correlation with whole-blood PAXGene miRNomes of the same individual was remarkable (correlation of 0.88). Finally, evaluation of the samples from the 53 patients with lung cancer exposed to different therapies showed that the biological variations exceeded the technical variability significantly (P technical variations significantly. DBS-based miRNA profiles will potentially further the translational character of miRNA biomarker studies. © 2017 American Association for Clinical Chemistry.

  10. Proceedings of the technical review on advances in geothermal reservoir technology---Research in progress

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, M.J. (ed.)

    1988-09-01

    This proceedings contains 20 technical papers and abstracts describing most of the research activities funded by the Department of Energy (DOE's) Geothermal Reservoir Technology Program, which is under the management of Marshall Reed. The meeting was organized in response to several requests made by geothermal industry representatives who wanted to learn more about technical details of the projects supported by the DOE program. Also, this gives them an opportunity to personally discuss research topics with colleagues in the national laboratories and universities.

  11. NRL Technical Year End Progress Report for MCSC PM-ICE FY11 SOW Tasks 1 and 2 - Hearing Loss

    Science.gov (United States)

    2012-05-18

    2 — Hearing Loss Research May 18, 2012 Approved for public release; distribution is unlimited. Peter C. HerdiC James W. mCmaHon daniel l. amon...Technical Year End Progress Report for MCSC PM-ICE FY11 SOW Tasks 1 and 2 — Hearing Loss Research Peter C. Herdic, James W. McMahon, Daniel L. Amon...deemed relevant to the warfighter. 18-05-2012 Memorandum Report Hearing loss Human ear Small weapons fire Shooter’s notch Program Manager, Infantry Combat

  12. Novel bimetallic dispersed catalysts for temperature-programmed coal liquefaction. Technical progress report, July--September 1996

    Energy Technology Data Exchange (ETDEWEB)

    Yoneyama, Yoshiharu; Wei, B.; Reddy, K.M.; Song, C.; Schobert, H.H.

    1997-01-01

    This quarterly report describes recent work on two related subjects: (1) effect of dispersed molybdenum catalyst precursor and the influence of water addition on C-O bond cleavage, aromatic hydrogenation and hydrodeoxygenation under coal liquefaction conditions, and (2) the effect of dispersed molybdenum catalyst precursor on the molecular weight reduction and desulfurization of petroleum resids related to coal/petroleum resids coprocessing. Technical progress on the C-O bond cleavage of 2,2{prime}-dinaphthyl ether and high temperature simulated distillation GC and HDS study on catalytic upgrading of atmospheric and vacuum resids.

  13. THE OPTIMAL ALLOCATION ABOUT CAPITAL AND LABOR IN THE ECONOMIC GROWTH WITH AN ENDOGENOUS TECHNICAL PROGRESS MODEL

    Institute of Scientific and Technical Information of China (English)

    刘金山; 李楚霖; 胡适耕

    2002-01-01

    In this paper, the balanced economic growth path was considered in a new growth model with endogenous technical progress. It is not only obtained the optimal allocation about capital and labor between a goods-producing sector and a R&D Sector,but also the optimal value of saving rates. By discussing the effect of parameters, it are also got the following results: When the rate of time preference (discount factor) rising, the fractions of Capital and labor in the goods-producing sector will increase , the fractions in R&D sector and the saving rates will decrease; When the population grows rapidly, the result will be contrary.

  14. Progress of biological invasions research in China over the last decade

    Directory of Open Access Journals (Sweden)

    Chengjen Shih

    2012-09-01

    Full Text Available As one of the five major global environmental problems, invasive species have posed serious threats to native ecosystems, public health, and regional economies. Although much progress has been madein the field of biological invasions research in China over the last decade, there are still large knowledge gaps. This paper reviews progress in the field of biological invasions research since 2000 as it relates to China, covering the diversity, colonization and immigration patterns of invasive species, mechanisms and ecological effects of biological invasions, and management and control of invasive species. In China, 529 invasive alien species have been identified, which originated primarily from South and North America, and the major taxa included terrestrial plants, terrestrial invertebrates, and microorganisms. We found a higher prevalence of invasive species in the eastern and southern provinces, compared to the western and northern provinces in China. This pattern is likely due to the differences in the level of economic development and environmental suitability between the two regions. Moreover, with further economic development, China may face more serious biological invasions in the future. These invasions of alien species are largely the combined results of the interactions between the intrinsic traits of these species along with resource opportunities and disturbances by human beings. Many mechanisms are responsible for successful invasionsof alien species, but phenotypic plasticity, adaptive evolution, enemy release, interspecific mutualism or commensalism, and new allelochemicals may be primary causative factors. Biological invasions in China have caused serious impacts on native ecosystems, including biodiversity and ecosystem services, alteration of biogeochemical cycles, threats to agricultural and forestry production, traffic and shipping, environmental safety, and public facilities. China has also made progress in the detection and

  15. Index to Nuclear Safety: a technical progress review by chrology, permuted title, and author, Volume 11(1) through Volume 20(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W B; Passiakos, M

    1980-06-01

    This index to Nuclear Safety, a bimonthly technical progress review, covers articles published in Nuclear Safety, Volume II, No. 1 (January-February 1970), through Volume 20, No. 6 (November-December 1979). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 600 technical articles published in Nuclear Safety in the last ten years are listed in this index.

  16. An up to 7-Year Retrospective Analysis of Biologic and Technical Complication With the All-on-4 Concept.

    Science.gov (United States)

    Tallarico, Marco; Canullo, Luigi; Pisano, Milena; Peñarrocha-Oltra, David; Peñarrocha-Diago, Miguel; Meloni, Silvio Mario

    2016-06-01

    The aim of this study was to evaluate retrospectively biologic and technical complications as well as clinical and radiographic outcomes of patients treated with 4 implants according to the All-on-4 protocol and followed up to 7 years of function. Data from 56 consecutive patients presenting complete edentulous jaw, aged 18 years or older, treated between January 2008 and December 2013, were evaluated. The outcomes were implant and prosthetic survival and success rates, any complications, and marginal bone loss (MBL). Two-hundred twenty-four implants were placed in 56 patients. During the entire follow-up, 1 maxillary implant but no prosthesis failed during the healing process. Fourteen patients experienced 1 complication each (10 technical, 4 biologic). The overall implant and prosthetic success rate was 98.2% and 82.1%, respectively. All complications were considered as minor and successfully resolved chairside. A mean MBL of 1.30 ± 0.63 mm was observed at the last follow-up. Statistically significant difference was found for postextractive implants (0.79 ± 0.26) vs implants placed in healed sites (1.03 ± 0.46; P = 0.024). Within the limits of the present study, the All-on-4 concept may be a valuable surgical and prosthetic option for the treatment of complete edentulous jaws. However, minor technical and biologic complications can occur. Further long-term prospective data with primary outcomes focused on success rates are needed.

  17. Technical progress report for the quarter 1 October-31 December 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This report describes the technical accomplishments on the commercial nuclear waste management programs and on the geologic disposal of nuclear wastes. The program is organized into eight tasks: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. (DLC)

  18. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    Science.gov (United States)

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  19. Atmospheric Effects of Nuclear Energy Centers (AENEC) Program. Annual technical progress report, July 1975--September 1976

    Energy Technology Data Exchange (ETDEWEB)

    Patrinos, A. A.; Hoffman, H. W. [comps.

    1977-04-01

    The Technical Memorandum contains information of a preliminary nature from the six participants of the Program describing their activities and presenting the results obtained during the reporting period. The birth of the Program, its definition and evolution are described, and a complete breakdown of responsibilities and tasks assigned to the six AENEC participants is presented.

  20. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    Science.gov (United States)

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  1. Space Power MHD (magnetohydrodynamic) System: Third quarterly technical progress report, 1 November 1987-31 January 1988

    Energy Technology Data Exchange (ETDEWEB)

    1988-03-15

    This progress report of the Space Power MHD System project presents the accomplishments during 1 November 1987 through 31 January 1988. The scope of work covered encompasses the definition of an MHD power system conceptual design and development plan (Task 1). Progress included the following: Subcontracts were issued to the MIT Plasma Fusion Center and the Westinghouse R and D Center. The performance of the 100 MW 500 sec. power system was optimized and the design concept finalized, including mass and energy balances. Mass and cost estimates were prepared. A design review was held at DOE/PETC. This also included the review of the technical issues definition and of the R and D Plan. Following the review, a final iteration on the conceptual design was initiated. Formulation of the R and D Plan was continued. Preparation of the Task 1 R and D Report was initiated. 12 figs.

  2. Measurements of scattering processes in negative ion - atom collisions. Technical progress report - year 1, April 1, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1995-12-01

    This Technical Progress Report describes the progress made on the research objectives during the past twelve months. The objective of this research project is to provide absolute cross section measurements of various scattering processes which occur in negative ion collisions with atomic (specifically, noble gas and atomic hydrogen) targets at intermediate energies. These processes include: elastic scattering, single- and double-electron detachment, and target-inelastic processes of excitation and ionization. Total cross sections for single- and double-electron detachment were recently published in Physical Review A from this research project. The researchers were successful this past year in acquiring the first cross section measurements of target excitation for H{sup -} impact on helium target atoms.

  3. The combined application of biological therapy and methotrexate in case of escape phenomenon progressing

    Directory of Open Access Journals (Sweden)

    Ponich E.S.

    2015-09-01

    Full Text Available Aim: the study of the efficacy of methotrexate in patients with the "escape effect" during the ustekinumab therapy. Materials and Methods. The results of methotrexate at a dose of 15-20mg/week in treatment of 4 patients receiving biologic and developed "escape effect". Ustekinumab is used as a hypodermic injection at a dose of 45 mg for a body weight of a patient no more than 100 kg, and 90 mg of body weight over 100 kg, at the zero week, the 4th week and then every 12 weeks. Patients control meets the standard management of patients in biological therapy. Results. The study shows that in the case of the resistance progressing when applying preparations of biological therapy, methotrexate is useful at a dose of 15-20mg/week for up to 6 months. The combined use of biologic therapy and methotrexate in the treatment of patients with psoriasis vulgaris, "escape effect" contributes to the marked regression of clinical symptoms and allows to control the process long enough, which is confirmed by the dynamics of the index PASI, BRS and DLQI. The combined method is highly safe, as evidenced by the lack of inhibition of hematopoiesis, the normal level of hepatic transaminases and serum creatinine, which greatly improves patient compliance in this type of therapy. Conclusion. The article presents the data of the combined application of biological medication therapy (ustekinumab and methotrexate for the treatment of patients with the common form of psoriasis vulgaris. In the case of the development of resistance of biological therapy recommended the appointment of methotrexate. The combined use of methotrexate and biologic therapy in the treatment of patients with psoriasis vulgaris contributes to marked regression of clinical symptoms and allows to control the process for a long time.

  4. University of Florida, University research program in robotics. Annual technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Crane, C.D. III; Tulenko, J.S.

    1994-05-01

    Progress is reported in the areas of environmental hardening, database, world modeling, vision, man-machine interface, advanced liquid metal reactor inspection robot, and articulated transporter/manipulator system (ATMS) development.

  5. Information and Communications Technical Support Services to the Office of Environment, Safety, and Health. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-01

    Progress is reported on the following tasks: development of safety publications, conference support, planning and reporting, MORT A/I video, print products, special graphics, and SAFE software development.

  6. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1, 1997--July 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Progress summaries are provided from the Amarillo National Center for Plutonium. Programs include the plutonium information resource center, environment, public health, and safety, education and training, nuclear and other material studies.

  7. Biomimetic bio-inspired biomorph sustainable? An attempt to classify and clarify biology-derived technical developments.

    Science.gov (United States)

    Speck, Olga; Speck, David; Horn, Rafael; Gantner, Johannes; Sedlbauer, Klaus Peter

    2017-01-24

    Over the last few decades, the systematic approach of knowledge transfer from biological concept generators to technical applications has received increasing attention, particularly because marketable bio-derived developments are often described as sustainable. The objective of this paper is to rationalize and refine the discussion about bio-derived developments also with respect to sustainability by taking descriptive, normative and emotional aspects into consideration. In the framework of supervised learning, a dataset of 70 biology-derived and technology-derived developments characterised by 9 different attributes together with their respective values and assigned to one of 17 classes was created. On the basis of the dataset a decision tree was generated which can be used as a straightforward classification tool to identify biology-derived and technology-derived developments. The validation of the applied learning procedure achieved an average accuracy of 90.0%. Additional extraordinary qualities of technical applications are generally discussed by means of selected biology-derived and technology-derived examples with reference to normative (contribution to sustainability) and emotional aspects (aesthetics and symbolic character). In the context of a case study from the building sector, all aspects are critically discussed.

  8. Analysis of biological and technical variability in gene expression assays from formalin-fixed paraffin-embedded classical Hodgkin lymphomas.

    Science.gov (United States)

    Vera-Lozada, Gabriela; Scholl, Vanesa; Barros, Mário Henrique M; Sisti, Davide; Guescini, Michele; Stocchi, Vilberto; Stefanoff, Claudio Gustavo; Hassan, Rocio

    2014-12-01

    Formalin-fixed paraffin-embedded (FFPE) tissues are invaluable sources of biological material for research and diagnostic purposes. In this study, we aimed to identify biological and technical variability in RT-qPCR TaqMan® assays performed with FFPE-RNA from lymph nodes of classical Hodgkin lymphoma samples. An ANOVA-nested 6-level design was employed to evaluate BCL2, CASP3, IRF4, LYZ and STAT1 gene expression. The most variable genes were CASP3 (low expression) and LYZ (high expression). Total variability decreased after normalization for all genes, except by LYZ. Genes with moderate and low expression were identified and suffered more the effects of the technical manipulation than high-expression genes. Pre-amplification was shown to introduce significant technical variability, which was partially alleviated by lowering to a half the amount of input RNA. Ct and Cy0 quantification methods, based on cycle-threshold and the kinetic of amplification curves, respectively, were compared. Cy0 method resulted in higher quantification values, leading to the decrease of total variability in CASP3 and LYZ genes. The mean individual noise was 0.45 (0.31 to 0.61 SD), indicating a variation of gene expression over ~1.5 folds from one case to another. We showed that total variability in RT-qPCR from FFPE-RNA is not higher than that reported for fresh complex tissues, and identified gene-, and expression level-sources of biological and technical variability, which can allow better strategies for designing RT-qPCR assays from highly degraded and inhibited samples. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Technical variability is greater than biological variability in a microarray experiment but both are outweighed by changes induced by stimulation.

    Directory of Open Access Journals (Sweden)

    Penelope A Bryant

    Full Text Available INTRODUCTION: A central issue in the design of microarray-based analysis of global gene expression is that variability resulting from experimental processes may obscure changes resulting from the effect being investigated. This study quantified the variability in gene expression at each level of a typical in vitro stimulation experiment using human peripheral blood mononuclear cells (PBMC. The primary objective was to determine the magnitude of biological and technical variability relative to the effect being investigated, namely gene expression changes resulting from stimulation with lipopolysaccharide (LPS. METHODS AND RESULTS: Human PBMC were stimulated in vitro with LPS, with replication at 5 levels: 5 subjects each on 2 separate days with technical replication of LPS stimulation, amplification and hybridisation. RNA from samples stimulated with LPS and unstimulated samples were hybridised against common reference RNA on oligonucleotide microarrays. There was a closer correlation in gene expression between replicate hybridisations (0.86-0.93 than between different subjects (0.66-0.78. Deconstruction of the variability at each level of the experimental process showed that technical variability (standard deviation (SD 0.16 was greater than biological variability (SD 0.06, although both were low (SD<0.1 for all individual components. There was variability in gene expression both at baseline and after stimulation with LPS and proportion of cell subsets in PBMC was likely partly responsible for this. However, gene expression changes after stimulation with LPS were much greater than the variability from any source, either individually or combined. CONCLUSIONS: Variability in gene expression was very low and likely to improve further as technical advances are made. The finding that stimulation with LPS has a markedly greater effect on gene expression than the degree of variability provides confidence that microarray-based studies can be used to

  10. Experimental Program Final Technical Progress Report: 15 February 2007 to 30 September 2012

    Energy Technology Data Exchange (ETDEWEB)

    Kinney, Edward R. [University of Colorado, Boulder, CO

    2014-09-12

    This is the final technical report of the grant DE-FG02-04ER41301 to the University of Colorado at Boulder entitled "Intermediate Energy Nuclear Physics" and describes the results of our funded activities during the period 15 February 2007 to 30 September 2012. These activities were primarily carried out at Fermilab, RHIC, and the German lab DESY. Significant advances in these experiments were carried out by members of the Colorado group and are described in detail.

  11. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2012

    OpenAIRE

    2013-01-01

    The programme of the Research Unit of the Fusion Association Euratom – DTU, Technical University of Denmark covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology ther...

  12. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2013

    OpenAIRE

    2014-01-01

    The programme of the Research Unit of the Fusion Association Euratom – DTU, Technical University of Denmark covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomsonscattering. Within fusion technology there...

  13. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2011

    OpenAIRE

    2012-01-01

    The programme of the Research Unit of the Fusion Association Euratom – DTU, Technical University of Denmark (until 31-12- 2011: Association Euratom – Risø DTU) covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collecti...

  14. Biological effects of high strength electric fields. Second interim progress report, September 1976--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, R.D.; Kaune, W.T.

    1977-05-01

    This report describes progress made on the Project during the period of September 9, 1976 to March 31, 1977 towards the determination of the biological effects of high strength electric fields on small laboratory animals. The efforts to date can be divided into five categories: (1) the design, construction, and testing of a prototype and special studies exposure system; (2) the design and construction of exposure systems for rats and mice; (3) dosimetry; (4) experiments to determine the maximum field strength which does not produce corona discharge, ozone formation, shocks to the animal, hair stimulation, or a behavioral preference by rats to avoid exposure to the field; and (5) preparations for the biological screening experiments.

  15. The acquisition of dangerous biological materials: Technical facts sheets to assist risk assessments of 46 potential BW agents

    Energy Technology Data Exchange (ETDEWEB)

    Aceto, Donato Gonzalo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Astuto-Gribble, Lisa M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gaudioso, Jennifer M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2007-11-01

    Numerous terrorist organizations have openly expressed interest in producing and deploying biological weapons. However, a limiting factor for many terrorists has been the acquisition of dangerous biological agents, as evidenced by the very few successful instances of biological weapons use compared to the number of documented hoaxes. Biological agents vary greatly in their ability to cause loss of life and economic damage. Some agents, if released properly, can kill many people and cause an extensive number of secondary infections; other agents will sicken only a small number of people for a short period of time. Consequently, several biological agents can potentially be used to perpetrate a bioterrorism attack but few are likely capable of causing a high consequence event. It is crucial, from a US national security perspective, to more deeply understand the likelihood that terrorist organizations can acquire the range of these agents. Few studies have attempted to comprehensively compile the technical information directly relevant to the acquisition of dangerous bacteria, viruses and toxins. In this report, technical fact sheets were assembled for 46 potentially dangerous biological agents. Much of the information was taken from various research sources which could ultimately and significantly expedite and improve bioterrorism threat assessments. By systematically examining a number of specific agent characteristics included in these fact sheets, it may be possible to detect, target, and implement measures to thwart future terrorist acquisition attempts. In addition, the information in these fact sheets may be used as a tool to help laboratories gain a rudimentary understanding of how attractive a method laboratory theft is relative to other potential acquisition modes.

  16. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, November 1, 1997--January 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report provides information on projects conducted by the Amarillo National Resource Center for Plutonium, a consortium of Texas A&M University, Texas Tech University, and the University of Texas. Progress is reported for four major areas: (1) plutonium information resource; (2) environmental, safety, and health; (3) communication, education, training, and community involvement; and (4) nuclear and other material studies. Environmental, safety, and health projects reported include a number of studies on high explosives. Progress reported for nuclear material studies includes storage and waste disposal investigations.

  17. Instrumentation and process control for fossil demonstration plants. Quarterly technical progress report, January--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L.G.; O' Fallon, N.M.

    1977-09-01

    Progress during the quarter of January through March 1977 on ANL 189a 49622R2, Instrumentation and Process Control for Fossil Demonstration Plants (FDP) is reported. Work has been performed on updating the study of the state-of-the-art of instrumentation for Fossil Demonstration Plants (FDP), on development of mass-flow and other on-line instruments for FDP, process control analysis for FDP, and organization of a symposium on instrumentation and control for FDP. Progress in these areas is described.

  18. Savannah River Ecology Laboratory annual technical progress report of ecological research, period ending July 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Vaitkus, M.R.; Wein, G.R. [eds.; Johnson, G.

    1993-11-01

    This progress report gives an overview of research programs at the Savannah River Site. Topics include; environmental operations support, wood stork foraging and breeding, defense waste processing, environmental stresses, alterations in the environment due to pollutants, wetland ecology, biodiversity, pond drawdown studies, and environmental toxicology.

  19. [Radioisotope thermoelectric generators and ancillary activities]. Monthly technical progress report, 1 April--28 April 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Tehnical progress achieved during this period on radioisotope thermoelectric generators is described under the following tasks: engineering support, safety analysis, qualified unicouple fabrication, ETG fabrication/assembly/test, RTG shipping/launch support, design/review/mission applications, and project management/quality assurance/reliability.

  20. Electrostatic beneficiation of coal. Quarterly technical progress report, April 1, 1996--June 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Mazumder, M.K.; Lindquist, D.; Tennal, K.B.

    1996-07-01

    Progress reports are presented for the following: modification to the electrostatic separator; review of DOE specifications for minimum beneficiation and calculations of grinding requirements based on washability; two-pass beneficiation; analysis of different sieve fractions; measurement of charge to mass ratio as a function of height of deposition; and charging of coal against different materials.

  1. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  2. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1975--30 June 1976

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, R. G.

    1976-01-01

    Progress is reported in the following areas of research: interactions of dissolved organic matter with inorganic nutrient cycling; regulation of the photosynthetic and decompositional metabolism of micro- and macroflora; regulatory mechanisms of growth and rates of carbon cycling; and fate of detrital dissolved and particulate organic matter. (HLW)

  3. Great Basin paleoenvironmental studies project; Technical progress report: First quarter (January--August 1993)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Project goals, project tasks, progress on tasks, and problems encountered are described and discussed for each of the studies that make up the Great Basin Paleoenvironmental Studies Project for Yucca Mountain. These studies are: Paleobotany, Paleofauna, Geomorphology, and Transportation. Budget summaries are also given for each of the studies and for the overall project.

  4. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  5. Energy conservation in citrus processing. Technical progress report No. 2, April 1, 1980-February 28, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Leo, M.A.; Lari, R.I.; Moore, N.R.; Broussard, M.R.; Gyamfi, M.

    1981-03-15

    Systems that reduce energy usage and are economically viable in the citrus fruit processing industry are identified. The preliminary results of Phase I are presented. Alternative systems to be considered are classified and denoted as central, modular, integrated, and combined. Progress is reported on the central and modular systems. (MCW)

  6. Review of technical program and progress. LBL geothermal exploration technology development program, FY 1982

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, N.E.

    1982-01-01

    The objectives, method of approach, main program elements, and progress through FY 1982 for Geothermal Exploration Technology Program at LBL are reviewed. Current tasks include controlled-source electromagnetic research, seismological research, magnetotelluric research, and electromagnetic technique evaluation and numerical modeling.

  7. [Tampa Electric Company IGCC project]. Final public design report; Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This final Public Design Report (PDR) provides completed design information about Tampa Electric Company`s Polk Power Station Unit No. 1, which will demonstrate in a commercial 250 MW unit the operating parameters and benefits of the integration of oxygen-blown, entrained-flow coal gasification with advanced combined cycle technology. Pending development of technically and commercially viable sorbent for the Hot Gas Cleanup System, the HGCU also is demonstrated. The report is organized under the following sections: design basis description; plant descriptions; plant systems; project costs and schedule; heat and material balances; general arrangement drawings; equipment list; and miscellaneous drawings.

  8. "Optimal design and routing of power lines; ecological, technical and economic perspectives” (OPTIPOL). Progress Report 2009

    OpenAIRE

    Bevanger, Kjetil Modolv; Bartzke, Gundula; Brøseth, Henrik; Gjershaug, Jan Ove; Hanssen, Frank Ole; Jacobsen, Karl Otto; Kvaløy, Pål; May, Roelof Frans; Nygård, Torgeir; Pedersen, Hans-Christian; Reitan, Ole; Refsnæs, Steinar; Stokke, Sigbjørn; Vang, Roald

    2009-01-01

    From 2009 inclusive, NINA has received economic support for research on power lines and wildlife from the Norwegian Research Council (NFR) through the RENERGI Programme. The project is named “Optimal design and routing of power lines; ecological, technical and eco-nomic perspectives” (OPTIPOL). It is scheduled for 5 years (2009-1013) and is part of the ac-tivities within CEDREN, i.e. the Centre for environmental design of renewable energy (cf. http://www.cedren.no). With a grid close to 200 0...

  9. New infrared photon absorption processes. Final technical progress report, August 1, 1988--February 1, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Bayfield, J.E.

    1993-05-01

    The fast ionization of atoms by very short laser pulses, and its possible suppression at extreme pulse intensities, is an active new field of investigation at present. Described is an investigation of whether past techniques for infrared laser multiphoton ionization of excited hydrogen atoms and of one-dimensional microwave ionization of highly excited hydrogen atoms can be combined and extended to address the new issues. Although technically difficult and requiring further improvement of apparatus, intense-field infrared laser experiments on excited hydrogen atoms are possible and can directly test theoretical and numerical results.

  10. Franck-Condon-like Progressions in Infrared Spectra of Biological Molecules.

    Science.gov (United States)

    Zabuga, Aleksandra V; Kamrath, Michael Z; Rizzo, Thomas R

    2015-10-22

    Infrared spectra in the NH stretch region are often used for structure determination of gas-phase biological molecules. Vibrational couplings complicate the structure determination process by giving rise to additional vibrational bands along with the expected fundamental transitions. We present an example of a strong anharmonic coupling in a biological molecule, Ac-Phe-Ala-LysH(+), which causes the appearance of long vibrational progressions in the infrared spectrum. By analyzing the spectra of the ground and the electronically excited state, we determined that the coupling occurs between the NH stretch (ωNH) and a low-frequency torsion of the phenyl ring (ωτ). We describe the vibrational progressions using a Born-Oppenheimer-like separation of the high-frequency stretch and low-frequency torsion with a quartic Taylor expansion for the potential energy surface that accounts for the equilibrium distance and frequency change of the torsional vibration upon the NH stretch excitation. We also demonstrate that small conformational changes in the peptide are sufficient to break this coupling.

  11. Measurements of scattering processes in negative ion-atom collisions. Technical progress report, 1 September 1992--31 August 1993

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1993-05-01

    This Technical Progress Report describes the progress made on the research objectives during the past twelve months. This research project is designed to provide measurements of various scattering processes which occur in H{sup {minus}} collisions with atomic (specifically, noble gas and atomic hydrogen) targets at intermediate energies. These processes include elastic scattering, single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H{sup {minus}} is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements in progress will provide either experimentally determined cross sections or set upper limits to those cross sections. In either case, these measurements will be stringent tests of our understanding in energetic negative ion - atom collisions. In addition secondary negative particle emission yields for H{sup 0} on Cu in the 3 to 50 keV range are shown.

  12. Measurements of scattering processes in negative ion-atom collisions. Technical progress report, 1 September 1991--31 August 1992

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1992-04-01

    This Technical Progress Report describes the progress made on the research objectives during the past twelve months. This research project is designed to provide measurements of various scattering processes which occur in H{sup {minus}} collisions with atomic (specifically, noble gas and atomic hydrogen) targets at intermediate energies. These processes include: elastic scattering,single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H{sup {minus}} is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements in progress will provide either experimentally-determined cross sections or set upper limits to those cross sections. In either case, these measurements will be stringent tests of our understanding in energetic negative ion-atom collisions. This series of experiments required the construction of a new facility and the initial ion beam was accelerated through the apparatus in April 1991.

  13. Recent Progress on Systems and Synthetic Biology Approaches to Engineer Fungi As Microbial Cell Factories.

    Science.gov (United States)

    Amores, Gerardo Ruiz; Guazzaroni, María-Eugenia; Arruda, Letícia Magalhães; Silva-Rocha, Rafael

    2016-04-01

    Filamentous fungi are remarkable organisms naturally specialized in deconstructing plant biomass and this feature has a tremendous potential for biofuel production from renewable sources. The past decades have been marked by a remarkable progress in the genetic engineering of fungi to generate industry-compatible strains needed for some biotech applications. In this sense, progress in this field has been marked by the utilization of high-throughput techniques to gain deep understanding of the molecular machinery controlling the physiology of these organisms, starting thus the Systems Biology era of fungi. Additionally, genetic engineering has been extensively applied to modify wellcharacterized promoters in order to construct new expression systems with enhanced performance under the conditions of interest. In this review, we discuss some aspects related to significant progress in the understating and engineering of fungi for biotechnological applications, with special focus on the construction of synthetic promoters and circuits in organisms relevant for industry. Different engineering approaches are shown, and their potential and limitations for the construction of complex synthetic circuits in these organisms are examined. Finally, we discuss the impact of engineered promoter architecture in the single-cell behavior of the system, an often-neglected relationship with a tremendous impact in the final performance of the process of interest. We expect to provide here some new directions to drive future research directed to the construction of high-performance, engineered fungal strains working as microbial cell factories.

  14. Field-simulation analysis for disposal of liquefaction solid waste. Third quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1982-08-27

    The tasks to be performed in this study are: (1) review applicable RCRA documents; (2) select waste and site-related parameters of interest; (3) compare and recommend leachate test methods; (4) review predictive simulation models and select one or more for further development; (5) identify required field verification data; and (6) develop a field monitoring program to obtain these data. This report represents the third quarterly progress report and contains the text prepared to date under Task 4.

  15. U.C. Davis high energy particle physics research: Technical progress report -- 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    Summaries of progress made for this period is given for each of the following areas: (1) Task A--Experiment, H1 detector at DESY; (2) Task C--Experiment, AMY detector at KEK; (3) Task D--Experiment, fixed target detectors at Fermilab; (4) Task F--Experiment, PEP detector at SLAC and pixel detector; (5) Task B--Theory, particle physics; and (6) Task E--Theory, particle physics.

  16. Using chemical biology to assess and modulate mitochondria: progress and challenges

    Science.gov (United States)

    Murphy, Michael P.

    2017-01-01

    Our understanding of the role of mitochondria in biomedical sciences has expanded considerably over the past decade. In addition to their well-known metabolic roles, mitochondrial are also central to signalling for various processes through the generation of signals such as ROS and metabolites that affect cellular homeostasis, as well as other processes such as cell death and inflammation. Thus, mitochondrial function and dysfunction are central to the health and fate of the cell. Consequently, there is considerable interest in better understanding and assessing the many roles of mitochondria. Furthermore, there is also a growing realization that mitochondrial are a promising drug target in a wide range of pathologies. The application of interdisciplinary approaches at the interface between chemistry and biology are opening up new opportunities to understand mitochondrial function and in assessing the role of the organelle in biology. This work and the experience thus gained are leading to the development of new classes of therapies. Here, we overview the progress that has been made to date on exploring the chemical biology of the organelle and then focus on future challenges and opportunities that face this rapidly developing field. PMID:28382206

  17. Association Euratom - Risoe National Laboratory, Technical Univ. of Denmark. Annual progress report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Michelsen, P.K.; Korsholm, S.B.; Rasmussen, J.J. (eds.)

    2008-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology on investigations of radiation damage of fusion reactor materials have been phased out during 2007. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2007. (Author)

  18. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2008

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2009-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. New activities in technology related to development of high temperature superconductors have been initiated in 2008. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2008. (Author)

  19. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2010

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2011-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Other activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2010. (Author)

  20. Redwood Community Action Agency: Technical progress report, 4th quarter, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    Redwood Community Action Agency (RCAA) has been developing a business plan for a shared-savings energy business under this grant since January, 1986. At this time RCAA is nearing completion of the research activities, although a 90 day no-cost extension has been requested and received to complete activities on this grant. All consultant reports on the technical feasibility analysis and market research activities have been completed at this time. Fifteen thousand dollars of equity capital has been allocated for the business venture being investigated under this grant through an equity grant from the California Department of Economic Opportunity. This money, combined with agency unrestricted funds, will provide the initial seed capital for the venture.

  1. The Progression of Podcasting/Vodcasting in a Technical Physics Class

    Science.gov (United States)

    Glanville, Y. J.

    2010-11-01

    Technology such as Microsoft PowerPoint presentations, clickers, podcasting, and learning management suites is becoming prevalent in classrooms. Instructors are using these media in both large lecture hall settings and small classrooms with just a handful of students. Traditionally, each of these media is instructor driven. For instance, podcasting (audio recordings) provided my technical physics course with supplemental notes to accompany a traditional algebra-based physics lecture. Podcasting is an ideal tool for this mode of instruction, but podcasting/vodcasting is also an ideal technique for student projects and student-driven learning. I present here the various podcasting/vodcasting projects my students and I have undertaken over the last few years.

  2. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2010-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2009. (Author)

  3. West Hackberry Tertiary Project. Quarterly technical progress report, September 3, 1993--December 3, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Fassihi, M.R.; Gillham, T.H.

    1993-11-30

    The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoirs for the project are the Camerina C- 1,2,3 Sands located on the west flank of West Hackberry Field in Cameron Parish, Louisiana. If successful, this project win demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomical.

  4. West Hackberry Tertiary Project. Quarterly technical progress report, March 3, 1993--June 3, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Gillham, T.H.

    1994-09-01

    The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility of combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoir for the project is the Camerina C-1,2,3 Sand located on the West Flank of West Hackberry Field in Cameron Parish, Louisiana. This reservoir has been unitized and is designated as the WH Cam C RI SU. If successful, this project will demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomic.

  5. Neutron scatter studies of chromatin structures related to functions. Technical progress report, November 1, 1991--May 15, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, E.M.

    1992-06-01

    We have made considerable progress in chromatin reconstitution with very lysine rich histone H1/H5 and in understanding the dynamics of nucleosomes. A ferromagnetic fluid was developed to align biological molecules for structural studies using small-angle-neutron-scattering. We have also identified and characterized in intrinsically bent DNA region flaking the RNA polymerase I binding site of the ribosomal RNA gene in Physarum Polycephalum. Finally projects in progress are in the areas of studying the interactions of histone H4 amino-terminus peptide 1-23 and acetylated 1-23 peptide with DNA using thermal denaturation; study of GGAAT repeats found in human centromeres using high resolution Nuclear Magnetic Resonance and nuclease sentivity assay; and the role of histones and other sperm specific proteins with sperm chromatin.

  6. Neutron scatter studies of chromatin structures related to functions. Technical progress report, November 1, 1991--May 15, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, E.M.

    1992-11-01

    Despite of setbacks in the lack of neutrons for the proposed We have made considerable progress in chromatin reconstitution with the VLR histone H1/H5 and in understanding the dynamics of nucleosomes. A ferromagnetic fluid was developed to align biological molecules for structural studies using small-angle-neutron-scattering. We have also identified and characterized an intrinsically bent DNA region flanking the RNA polymerase I binding site of the ribosomal RNA gene in Physarum Polycephalum. Finally projects in progress are in the areas of studying the interatctions of histone H4 amino-terminus peptide 1-23 and acetylated 1-23 peptide with DNA using thermal denaturation; study of GGAAT repeats found in human centromeres using high resolution Nuclear magnetic Resonance and nuclease sentivity assay; and the role of histones and other sperm specific proteins with sperm chromatin.

  7. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1977-02-23

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication.

  8. Photophysics and chemistry at PAH compounds. Progress and proposed technical program

    Energy Technology Data Exchange (ETDEWEB)

    Pope, M.; Geacintov, N.E.

    1984-01-01

    The work can be divided into four main areas that represent the evolution of biological and material damage from radiation and environmental impacts. The four areas are as follows: Part I deals with early events in radiation absorption in polycyclic aromatic hydrocarbons (PAH) that precedes chemical changes. The major components in this phase are electronically excited states, such as excitons and charge carriers. This includes theoretical and experimental studies; in some cases, the model compounds used are not PAH compounds, but are molecular solids that exhibit properties that should also exist in the PAH compounds. In Part II, we discuss particulate photophysics in which our photoemission studies play a major role. Here too, there are fundamental theoretical and experimental aspects. In Part III, we discuss the chemical reactions produced by the interaction of electronically excited states of PAH compounds with aqueous systems, and in Part IV, we discuss the reactions of PAH compounds and their derivatives that precede biological damage in living systems. As mentioned in our previous report, all of the above are relevant to an understanding of the mechanism of environmentally induced damage to living systems, either by radiation or by the products of combustion. In addition, some possible strategies for breaking the chain that leads to biological damage flow from our results.

  9. Engineering support services for the DOE/GRI coal gasification research program. Quarterly technical progress report, January-March 1982

    Energy Technology Data Exchange (ETDEWEB)

    Bostwick, L.E.; Ethridge, T.R.; Starr, D.W.; Koneru, P.B.; Hubbard, D.A.; Shah, K.V.; Smith, M.R.; Ward, W.E.; Wong, E.W.

    1982-05-01

    Kellogg continued to actively monitor operations at BI-GAS, Westinghouse and IGT (for peat gasification). Pilot plant/PDU test runs which were monitored and reported included BI-GAS Tests G-18, G-18A and G-18B; Westinghouse PDU Test TP-032-1 and CFSF Test TP-M003; and Peatgas Pilot Plant Test No. 5. Kellogg also monitored winterization/maintenance activities at BI-GAS and Westinghouse and precommissioning of the IGT Wet Carbonization PDU. The final report on the Hygas Data Base Evaluation was issued, while final revisions were completed for the reports concerning PDU data base evaluations of Peatgas and single-stage peat gasification. Efforts toward completion of the brochure describing the DOE/GRI Joint Program proceeded. Normal MPC activities continued. Several technical progress reports were issued during this quarter.

  10. Advanced coal conversion process demonstration. Technical progress report for the period July 1, 1995--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from July 1, 1995 through September 30, 1995. The ACCP Demonstration Project is a US Department of Energy (DOE) Clean Coal Technology Project. This project demonstrates an advanced, thermal, coal upgrading process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal upgrading, the cola is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal.

  11. Management of dry flue gas desulfurization by-products in underground mines. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Dutta, D.; Esling, S. [and others

    1995-07-01

    On September 30, 1993, the U.S. Department of Energy-Morgantown Energy Technology Center and Southern Illinois University at Carbondale (SIUC) entered into a cooperative research agreement entitled {open_quotes}Management of Dry Flue Gas Desulfurization By-Products in Underground Mines{close_quotes} (DE-FC21-93MC30252). Under the agreement Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues in abandoned coal mines, and will assess the environmental impact of such underground residues placement. Previous quarterly Technical Progress Reports have set forth the specific objectives of the program, and a discussion of these is not repeated here. Rather, this report discusses the technical progress made during the period April 1 - June 30, 1995. A final topical report on the SEEC, Inc. demonstration of its technology for the transporting of coal combustion residues was completed during the quarter, although final printing of the report was accomplished early in July, 1995. The SEEC technology involves the use of Collapsible Intermodal Containers (CIC`s) developed by SEEC, and the transportation of such containers - filled with fly ash or other coal combustion residues - on rail coal cars or other transportation means. Copies of the final topical report, entitled {open_quotes}The Development and Testing of Collapsible Intermodal Containers for the Handling and Transport of Coal Combustion Residues{close_quotes} were furnished to the Morgantown Energy Technology Center. The Rapid Aging Test colums were placed in operation during the quarter. This test is to determine the long-term reaction of both the pneumatic and hydraulic mixtures to brine as a leaching material, and simulates the conditions that will be encountered in the actual underground placement of the coal combustion residues mixtures. The tests will continue for about one year.

  12. Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Ben Poulter; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

    2006-06-30

    The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.

  13. Base program on energy related research. Quarterly technical progress report, February--April 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    Progress reports are briefly described for the following areas of research: oil and gas; advanced systems applications; environmental technologies; and applied energy science. Oil and gas research includes: CROW {sup TM} process modeling; and miscible-immiscible gas injection processes. Advanced systems applications covers: development and optimization of a process for the production of a premium sold fuel from western US coals; development of an on-line alkali monitoring probe; optimization of the recycle oil process for eastern oil shale; and process support and development. Environmental technologies has solid waste management; and remediation of contaminated soils.

  14. Fusion programs in applied plasma physics. Technical progress report, July 11, 1992--May 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This report summarizes the progress made in theoretical and experimental research funded by US Department of Energy Grant No. DE-FG03-92ER54150, during the period July 11, 1992 through May 31, 1993. Four main tasks are reported: applied plasma physics theory, alpha particle diagnostic, edge and current density diagnostic, and plasma rotation drive. The report also discusses the research plans for the theory and experimental programs for the next grant year. Reports and publications supported by the grant during this period are listed in the final section.

  15. Decontamination Systems Information and Research Program. Quarterly technical progress report, July 1--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    Progress reports are presented for the following projects: systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies--drain-enhanced soil flushing (DESF) for organic contaminants removal; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors--monolayer and multilayer self-assembled films for chemical sensors; Winfield Lock and Dam remediation; Winfield cleanup survey; assessment of technologies for hazardous waste site remediation--non-treatment technologies and pilot scale test facility implementation; assessment of environmental remediation storage technology; assessment of environmental remediation excavation technology; assessment of environmental remediation monitoring technology; and remediation of hazardous sites with steam reforming.

  16. GPHS-RTGs in support of the Cassini RTG Program. Semi annual technical progress report, September 26, 1994--April 2, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-20

    The technical progress achieved during the period 26 September 1994 through 2 April 1995 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described herein. Monthly technical activity for the period 27 February 1995 through 2 April 1995 is included in this progress report. The report addresses tasks, including: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; ETG Fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and CAGO acquisition (capital funds).

  17. Silicon ribbon growth by a capillary action shaping technique. Quarterly technical progress report No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

    1975-01-01

    Progress during the second quarter of the contractual effort is described. The work performed related mainly to ribbon growth by a capillary action shaping technique and to ribbon characterization. Actual progress in the crystal growth area includes the evaluation of 10 potential die materials other than carbon and the process development for 25-mm-wide ribon. From the die study it is concluded that boron carbide, silicon carbide, and silicon nitride may warrant further investigation as die materials. Process development for 25-mm ribbon growth resulted in ribbons of superior surface quality. Potential ribbongrowth problems encountered and discussed include a boron doping anomaly and frozen-in stresses in ribbons. The characterization effort concentrated on the development of a solar-cell process to be used for ribbon characterization. Material requirements and detailed process procedures are given. Solar cells fabricated by this process are compared with commercially available solar cells and compare favorably. A transmission electron microscopy study of planar boundaries frequently observed in ribbon crystals is reported. (auth)

  18. Review of Chemical, Biological, Radiological, and Nuclear (CBRN) Terminology in Technical Guide 316 (TG 316) and Allied Medical Publication 8(C) (AMedP-8(C))

    Science.gov (United States)

    2013-05-01

    Guide 316 Supplement G1: Preliminary biological military exposure guidelines for aerosolized Staphylococcal Enterotoxin B (SEB), (Aberdeen Proving...Phase I preliminary BMEGs are completed for anthrax, plague, tularemia, ricin, and Staphylococcal Enterotoxin B (SEB). The Phase II process has been...USAPHC. Technical Guide 316 Supplement G1: Preliminary biological military exposure guidelines for aerosolized Staphylococcal Enterotoxin B (SEB

  19. Savannah River Ecology Laboratory. Annual technical progress report of ecological research

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.H.

    1996-07-31

    The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA). The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts basic and applied ecological research, as well as education and outreach programs, under a contract with the U.S. Department of Energy (DOE) at the Savannah River Site (SRS) near Aiken, South Carolina. Significant accomplishments were made during the past year in the areas of research, education and service. The Laboratory`s research mission was fulfilled with the publication of two books and 143 journal articles and book chapters by faculty, technical and students, and visiting scientists. An additional three books and about 80 journal articles currently are in press. Faculty, technician and students presented 193 lectures, scientific presentations, and posters to colleges and universities, including minority institutions. Dr. J Vaun McArthur organized and conducted the Third Annual SREL Symposium on the Environment: New Concepts in Strewn Ecology: An Integrative Approach. Dr. Michael Newman conducted a 5-day course titled Quantitative Methods in Ecotoxicology, and Dr. Brian Teppen of The Advanced Analytical Center for Environmental Sciences (AACES) taught a 3-day short course titled Introduction to Molecular Modeling of Environmental Systems. Dr. I. Lehr Brisbin co-hosted a meeting of the Crocodile Special Interest Group. Dr. Rebecca Sharitz attended four symposia in Japan during May and June 1996 and conducted meetings of the Executive Committee and Board of the International Association for Ecology (ENTECOL).

  20. Pulverized coal firing of aluminum melting furnaces. First annual technical progress report, May 1978-June 1979

    Energy Technology Data Exchange (ETDEWEB)

    West, C.E.; Hines, J.E.; Stewart, D.L. Jr.; Yu, H.

    1979-10-01

    The ultimate objective of this program is the commercial demonstration of an efficient, environmentally acceptable coal firing process suitable for implementation on melting furnaces throughout the aluminum industry. To achieve this goal, the program has been divided into two phases. Phase I has begun with the design and construction of a 350 lb/h (coal) staged slagging cyclone combustor (SSCC) attached to a 7-ft dia aluminum melting ladle furnace. Process development will culminate with a 1000 pph prototype SSCC firing a 40,000 lb capacity open hearth melting furnace at the Alcoa Laboratories. Phase II implementation is currently planned for Alcoa's Lafayette, IN, Works, where two of the ingot plant's five open hearth melting furnaces will be converted to utilize coal. In addition to confirmation of data gathered in Phase I, the effect of extended production schedule operation on equipment and efficiencies will be determined. This work would begin in 1982 pursuant to technical and economic evaluation of the process development at that time. A major design subcontract for assistance in the design of the SSCC is 80% completed.

  1. Fundamental Technical Elements of Freeze-fracture/Freeze-etch in Biological Electron Microscopy

    Science.gov (United States)

    Freeze-fracture/freeze-etch describes a process whereby specimens, typically biological or nanomaterial in nature, are frozen, fractured, and replicated to generate a carbon/platinum "cast" intended for examination by transmission electron microscopy. Specimens are subjected to u...

  2. Fundamental Technical Elements of Freeze-fracture/Freeze-etch in Biological Electron Microscopy

    Science.gov (United States)

    Freeze-fracture/freeze-etch describes a process whereby specimens, typically biological or nanomaterial in nature, are frozen, fractured, and replicated to generate a carbon/platinum "cast" intended for examination by transmission electron microscopy. Specimens are subjected to u...

  3. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1976--30 June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, R.G.

    1977-01-01

    Progress is reported on investigations on the qualitative and quantitative cycling of particulate and dissolved organic matter within lakes and their drainage basins. Interactions of dissolved organic matter with inorganic nutrient cycling and regulation of the photosynthetic and decompositional metabolism of micro- and macroflora remain the focal point of these studies. Major efforts were directed towards the sources fates, pathways, and interactions of dissolved organic matter in inorganic chemical cycling; allochthonous sources, metabolism en route, and inputs to the lake systems of increasing stages of eutrophication; and the relationships of these compounds to the nutrient physiology and metabolism of phytoplankton, sessile algae, macrophytes, and bacterial populations. Results of studies carried out in a freshwater lake in Michigan (Lawrence Lake) are reported. 165 references.

  4. New imaging systems in nuclear medicine. Technical progress report, October 1, 1976--May 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Brownell, G.L.

    1977-01-01

    Work carried out on the development of instrumentation and techniques for positron scintigraphy is discussed. Progress in positron imaging instrumentation and applications is detailed. The assembly and initial evaluation of the new multicrystal positron camera, PC-II, has been completed. Images have been obtained in both two and three-dimensions which demonstrate the basic physical properties of the instrument. Successful measurements using transverse section imaging have been carried out on animals and human volunteers. Physiological investigation using PC-II is proceeding. A flexible and accurate computer program has been developed for transverse section reconstruction of data acquired by PC-II. This program makes it possible to reconstruct both the activity distribution and the distribution of absorption. The program has been developed in such a way that it can handle variations in the data collection procedure. Clinical studies using PC-I and PC-II are being carried on in areas of heart, lung and brain.

  5. [Geothermal system temperature-depth database and model for data analysis]. 5. quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Blackwell, D.D.

    1998-04-25

    During this first quarter of the second year of the contract activity has involved several different tasks. The author has continued to work on three tasks most intensively during this quarter: the task of implementing the data base for geothermal system temperature-depth, the maintenance of the WWW site with the heat flow and gradient data base, and finally the development of a modeling capability for analysis of the geothermal system exploration data. The author has completed the task of developing a data base template for geothermal system temperature-depth data that can be used in conjunction with the regional data base that he had already developed and is now implementing it. Progress is described.

  6. Instrumentation and process control for fossil demonstration plants. Annual technical progress report, October 1976--September 1977

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L. G.; O' Fallon, N. M.

    1977-10-01

    Progress on Instrumentation and Process Control for Fossil Demonstration Plants (FDP) is reported. Work has been performed on updating the study of the state-of-the-art of instrumentation for FDP, development of mass-flow and other on-line instruments for FDP, process control analysis for FDP, and organization of a symposium on instrumentation and control for FDP. A Solids/Gas Flow Test Facility (S/GFTF) under construction for instrument development, testing, evaluation, and calibration is described. The development work for several mass-flow and other on-line instruments is described: acoustic flowmeter, capacitive density flowmeter, neutron activation flowmeter, gamma ray correlation flowmeter, optical flowmeter, composition analysis system, and capacitive liquid interface level meter.

  7. Waste Isolation Safety Assessment Program. Technical progress report for FY-1978

    Energy Technology Data Exchange (ETDEWEB)

    Brandstetter, A.; Harwell, M.A.; Howes, B.W.; Benson, G.L.; Bradley, D.J.; Raymond, J.R.; Serne, R.J.; Schilling, A.H.

    1979-07-01

    Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE) is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of making those analyses. Progress on the following tasks is reported: release scenario analysis, waste form release rate analysis, release consequence analysis, sorption-desorption analysis, and societal acceptance analysis. (DC)

  8. Methane from biomass and waste. Annual report for 1984. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, W.H.

    1985-01-01

    The report summarizes the research conducted in several projects by a wide array of faculty at the University of Florida, researching the production of methane from biomass and waste. Growth and yield data on a wide variety of plant species and varieties in eight plant resource groups are reported on promising species selected from extensive screening trials of over 150 species. Focused intensive research results are summarized for water hyacinth and Napier grass--model species showing yields in excess of 20 dry tons/acre/year. Over 1000 samples were bioassayed for methane yields and the variables affecting conversion to methane were defined. Methanogenesis results covering the spectrum from factors of cellular biology to operating parameters for large digesters. Results emphasize the multiphase Anaerobic Digestion System (MADS) an innovative design that employs leached/packed beds. A comprehensive information management system and an integrated methane form biomass system model (BIOMET) used for research evaluation and program management are described.

  9. Innovative Clean Coal Technology (ICCT). Technical progress report, first quarter, 1993, January 1993--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal-fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels; (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}; and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. The demonstration will be performed at Gulf Power Company`s Plant Crist Unit No. 5 (75 NM capacity) near Pensacola, Florida. The project will be funded by the U.S. Department of Energy (DOE), Southern Company Services, Inc. (SCS on behalf of the entire Southern electric system), the Electric Power Research Institute (EPRI), and Ontario Hydro. SCS is the participant responsible for managing all aspects of this project.

  10. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Progress report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, K.; Bartzke, G.; Broeseth, H.; Gjershaug, J.O.; Hanssen, F.; Jacobsen, K.-O.; Kvaloey, P.; May, R.; Nygaard, T.; Pedersen, H.C.; Reitan, O.; Refsnaes, S.; Stokke, S.; Vang, R.

    2009-12-15

    From 2009 inclusive, NINA has received economic support for research on power lines and wildlife from the Norwegian Research Council (NFR) through the RENERGI Programme. The project is named 'Optimal design and routing of power lines; ecological, technical and economic perspectives' (OPTIPOL). It is scheduled for 5 years (2009-1013) and is part of the activities within CEDREN, i.e. the Centre for environmental design of renewable energy (cf. http://www.cedren.no). With a grid close to 200 000 km overhead power-lines, the associated rights-of-way (ROW) affect huge land areas in Norway. The overall goal is to develop predict-ing tools for optimal routing of power lines from an environmental perspective and assess technical and economic solutions to minimize conflicts with wildlife and habitat conservation. Thus, the OPTIPOL rationale is based on the belief that the negative effects of electricity transmission and distribution can be reduced with respect to birds and mammals. OPTIPOL has several ambitious objectives, and is divided into sub-projects and specific tasks. From the first of November a PhD-student became part of the project, a position that will be held for 4 years. The main objective of the PhD-activities will be to assess how and why different wildlife species use deforested areas below power lines, evaluate possible positive and negative effects of power-line ROWs, and assess the possibilities for quality improvement. Another part of the project is dedicated the effects of linear structures on movement patterns and distribution in the landscape in native deer species. Here we will examine how different spatial scales influence the processes that guide movement patterns, and responses to linear structures. Another focus will be small game species, with mountain hare, capercaillie, black grouse and hazel grouse as model species. The main objective will be to assess the impact of transforming ROW habitats into attractive small-game foraging

  11. Development and application of photosensitive device systems to studies of biological and organic materials. Progress report, January 1, 1993--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Gruner, S.M.; Reynolds, G.T.

    1993-09-14

    This progress report summarizes results, as of August, 1993, for DOE grant DE-FG-02-76ER60522 during the fiscal period 1/1/93 to 12/31/93, which is the first year of a 3-year grant cycle. The overall goals of the grant are to develop advanced x-ray detector technologies, especially as applicable for biological and materials research at the national laboratories, and to train graduate and post-doctoral students on the use of these technologies via the performance of original biological and materials research. As summarized below, there has been good progress toward achieving the research goals of the original 3-year proposal; in consequence, the research plan and the total budget for the rest of 1993 and beyond is still well described by the original proposal. Accomplishments since the last progress report include: (A) A 1k x 1k fiber optically coupled CCD detector was assembled, tested at CHESS and is slated for extended user trials this Fall. A 2k x 2k CCD detector is being assembled for permanent installation at CHESS. (B) X-ray detector phosphors, calibration techniques, and system software have been developed. (C) The design of a Pixel Array Detector, a collaborative project with the Advanced Photon Source, has been initiated. (D) The properties of biomembrane lipids under extremes of pressure have been investigated. High pressure instrumentation and techniques have been developed. (E) The physics of mesophase formation in biomembrane lipid, surfactant, and polymeric systems have been studied. This includes study of the interaction of membrane proteins with elastically strained lipid bilayers. (G) Work has been initiated on the use of thermal diffuse scatter from proteins as a probe of protein dynamics. (H) Studies on luminescent phenomena have been reported. Since the last progress report (dated 15 May 1992), this work has resulted in 10 published papers, 7 abstracts, 1 Ph.D. thesis and 1 technical report.

  12. Supramolecular structures for photochemical energy conversion. Technical progress report, 1993--1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    This research project is concerned with the design, synthesis and study by photochemical and spectroscopic methods of complex molecular devices that mimic some important aspects of photosynthetic electron and energy transfer. Properly engineered molecules of this type can functionally mimic photosynthetic light harvesting (singlet-singlet energy transfer between chromophores), photoprotection from light-initiated singlet oxygen damage (triplet-triplet energy transfer from chlorophylls to carotenoid polyenes), and, most importantly, photoinduced multistep electron transfer to generate charge-separated states that preserve some of the photon energy as chemical potential. During the last three years, progress has been made on several fronts, all of which are related to the overall goal. A biomimetic system based on carotenoid-porphyrin-quinone triads has been constructed that demonstrates photoinduced transmembrane charge separation which in turn drives transmembrane proton transfer. Another investigation has focused on the use of proton transfer reactions to stabilize the initial products of photoinduced electron transfer and thereby increase the yield of long-lived charge separation. A third study has investigated the influence of rigid molecular geometries and short donor-acceptor separations on photoinduced electron transfer reactions. Finally, generation and quenching of singlet molecular oxygen by chlorophyll aggregates has been studied. All four studies are described and results are discussed.

  13. Advanced thermally stable jet fuels: Technical progress report, July 1994--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Boehman, A.; Coleman, M.M.

    1994-07-01

    There are five tasks within this project on thermally stable coal-based jet fuels. Progress on each of the tasks is described. Task 1, Investigation of the quantitative degradation chemistry of fuels, has 3 subtasks which are described: Pyrolysis of n-alkylbenzenes; Thermal decomposition of n-tetradecane in near-critical region; and Re-examining the effects of reactant and inert gas pressure on tetradecane pyrolysis--Effect of cold volume in batch reactor. Under Task 2, Investigation of incipient deposition, the subtask reported is Uncertainty analysis on growth and deposition of particles during heating of coal-derived aviation gas turbine fuels; under Task 3, Investigation of the quantitative degradation chemistry of fuels, is subtask, Effects of high surface area activated carbon and decalin on thermal degradation of jet A-1 fuel and n-dodecane; under Task 4, Coal-based fuel stabilization studies, is subtask, Screening potential jet fuel stabilizers using the model compound dodecane; and under Task 5, Exploratory studies on the direct conversion of coal to high quality jet fuels, is subtask, Shape-selective naphthalene hydrogenation for production of thermally stable jet fuels. 25 refs., 64 figs., 22 tabs.

  14. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1977--30 June 1978

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, R.G.

    1978-01-01

    Interactions of dissolved organic matter with inorganic nutrient cycling and regulation of the photosynthetic and decompositional metabolism of micro- and macroflora remains the focal point of these studies. Major efforts are directed towards the sources, fates, pathways, and interactions of dissolved organic matter in inorganic chemical cycling; allochthonous sources, metabolism en route, and inputs to the lake systems of increasing stages of eutrophication; and the relationships of these compounds to the nutrient physiology and metabolism of phytoplankton, sessile algae, macrophytes, and bacterial populations of the littoral zones and wetlands of the drainage basin. Analyses of regulatory mechanisms of growth and rates of carbon cycling center on evaluation of quantitative control interactions among the microflora of the pelagial zones of seversal lakes of progressively greater eutrophy, littoral photosynthetic producer-decomposer complex, and allochthonous inorganic--organic influxes and their biotic processing. The underlying thesis is that quantification of the dynamic carbon fluxes among these components and their rate control mechanisms by physical and chemical factors are fundamental to elucidation of the rate functions of lake eutrophication.

  15. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1978--30 Jun 1979

    Energy Technology Data Exchange (ETDEWEB)

    Wenzel, R.G.

    1979-01-01

    Progress is reported in continuing investigations focused on integrated studies of the qualitative and quantitative cycling and metabolism of particulate and dissolved organic carbon in lakes and their inflow sources (surface and subsurface). Emphasis is placed on the sources, fates, and interactions of dissolved and particulate organic matter in relation to: (a) inorganic chemical cycling, (b) allochthonous loading to the lake system, and (c) the coupled nutrient physiology and metabolism of phytoplankton, bacterial populations, macrophytes, and attendant sessile algal-bacterial communities. Regulatory mechanisms of growth and rates of carbon and nutrient cycling are being evaluated among the (a) inorganic-organic influxes of allochthonous sources as they are controlled by wetland-littoral communities, (b) the littoral photosynthetic producer-decomposer complex, and (c) the microflora of the pelagial zone. Quantification of carbon fluxes among these components and control mechanisms is fundamental to elucidation of the rate functions of lake eutrophication. The integrated studies addressing these multifacted objectives are summarized in three summary diagrams.

  16. Technical progress report during Phase 1 of the continuous fiber ceramic composites program

    Energy Technology Data Exchange (ETDEWEB)

    Richerson, D.W.

    1994-03-15

    United States industry has a critical need for materials that are lightweight, strong, tough, corrosion resistant and capable of performing at high temperatures; such materials will enable substantial increase in energy efficiency and reduction in emissions of pollutants. Continuous fiber ceramic composites (CFCCs) are an emerging class of materials which have the potential for the desired combination of properties to meet the industrial needs. A $10 billion annual market has been estimated for CFCC products by the year 2010, which equates to over 100,000 industrial sector jobs. The CFCC program began in the spring of 1992 as a three-phase 10-year effort to assess potential applications of CFCC materials, develop the necessary supporting technologies to design, analyze and test CFCC materials, conduct materials and process development guided by the applications assessment input, fabricate test samples and representative components to evaluate CFCC material capabilities under application conditions, and analyze scaleability and manufacturability plus demonstrate pilot-scale production engineering. DOE awarded 10 Phase I cooperative agreements to industry-lead teams plus identified generic supporting technology projects. This document highlights the broad progress and accomplishments on these contracts and support technology projects during Phase I.

  17. Biomass power for rural development. Technical progress report, April 1, 1997--June 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, E.

    1997-08-01

    Detailed task progress reports and schedules are provided for the DOE/USDA sponsored Biomass Power for Rural Development project. The focus of the project is on developing commercial energy crops for power generation by the year 2000. The New York based Salix Consortium project is a multi-partner endeavor, implemented in three stages. Phase-I, Final Design and Project Development, will conclude with the preparation of construction and/or operating permits, feedstock production plans, and contracts ready for signature. Field trials of willow (Salix) have been initiated at several locations in New York (Tully, Lockport, King Ferry, La Fayette, Massena, and Himrod) and co-firing tests are underway at Greenidge Station (NYSEG) and Dunkirk Station (NMPC). Phase-H of the project will focus on scale-up of willow crop acreage, construction of co-firing facilities at Dunkirk Station (NMPC), and final modifications for Greenidge Station. Cofiring willow is also under consideration for GPU`s Seward Station where testing is under way. There will be an evaluation of the energy crop as part of the gasification trials occurring at BED`s McNeill power station. Phase-III will represent fullscale commercialization of the energy crop and power generation on a sustainable basis.

  18. MHD Coal Fired Flow Facility. Quarterly technical progress report, July-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Altstatt, M. C.; Attig, R. C.; Brosnan, D. A.

    1980-11-01

    Significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Energy Conversion Facility (ECF) are described. On Task 1, the first phase of the downstream quench system was completed. On Task 2, all three combustor sections were completed, hydrotested, ASME code stamped, and delivered to UTSI. The nozzle was also delivered. Fabrication of support stands and cooling water manifolds for the combustor and vitiation heater were completed, heat transfer and thermal stress analysis, along with design development, were conducted on the generator and radiant furnace and secondary combustor installation progressed as planned. Under Task 3 an Elemental Analyzer and Atomic Absorption Spectrophotometer/Graphite Furnace were received and installed, sites were prepared for two air monitoring stations, phytoplankton analysis began, and foliage and soil sampling was conducted using all study plots. Some 288 soil samples were combined to make 72 samples which were analyzed. Also, approval was granted to dispose of MHD flyash and slag at the Franklin County landfill. Task 4 effort consisted of completing all component test plans, and establishing the capability of displaying experimental data in graphical format. Under Task 7, a preliminary testing program for critical monitoring of the local current and voltage non-uniformities in the generator electrodes was outlined, electrode metal wear characteristics were documented, boron nitride/refrasil composite interelectrode sealing was improved, and several refractories for downstream MHD applications were evaluated with promising results.

  19. Critical contributions in MHD power generation. Quarterly technical progress report, June 1--August 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1977-10-01

    Current research and development in open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology is presented. Progress is reported on the following tasks: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) Parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) Develop combustion data pertinent to the design of MHD combustors; this work is intended to determine the combustion characteristics of selected coal feed stock in terms of devolatilization kinetics, char characteristics, and combustion gas chemistry; (4) Establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (5) Establish the operating characteristics of an MHD disk generator; (6) Continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) Integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel.

  20. Critical contributions in MHD power generation. Quarterly technical progress report, June 1--August 31, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1976-10-01

    Research progress on open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology is detailed. Work is reported in the following areas: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) develop combustion data pertinent to the design of MHD combustors; (4) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; (5) establish the operating characteristics of an MHD disk generator; (6) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel; (8) U-25 electrode screening tests.

  1. Great Basin paleoenvironmental studies project; Technical progress report, second quarter, September--November, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Progress is described in the four tasks associated with this project. Task 1, Paleobotanical studies in the Great Basin, has as its objective the reconstruction of the response of vegetation to climate in order to identify periods of mesic climate at Yucca Mountain during the last 20,000 to 50,000 years. Past extremes in infiltration rates are expected to serve as estimates of climate that may be expected during the next 10,000 years at Yucca Mtn. Task 2, Paleofaunas, will construct a history of Great Basin vertebrates that will provide empirical evidence of past environmental and climatic conditions. The objective of Task 3, Geomorphology, is to document the responses of surficial processes and landforms to the climatic changes documented by studies of packrat middens, pollen, and faunal distributions. The goal of Task 4, Transportation, is to compare the results from three models that have been suggested as appropriate for evaluating flood flows on alluvial fans with the results obtained from the traditional one-dimensional, stochastic model used in previous research for Yucca Mountain. This research looked at three alluvial fans with rail transportation alignments crossing them.

  2. Capillary electrokinetic separations with optical detection. Technical progress report, February 1, 1993--January 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Sepaniak, M.J.

    1993-10-01

    This program seeks the development of capillary electrokinetic separation techniques and associated optical methods of detection. Fundamental studies of pertinent separation and band broadening mechanisms are being conducted, with the emphasis on understanding systems that include highly-ordered assemblies as running buffer additives. The additives include cyclodextrins, affinity reagents, and soluble (entangled) polymers and are employed with capillary electrophoresis, CE and/or micellar electrokinetic capillary chromatography, MECC modes of separation. The utility of molecular modeling techniques for predicting the effects of highly ordered assemblies on the retention behavior of isomeric compounds is under investigation. The feasibility of performing separations using a non-aqueous solvent/fullerene electrochromatographic system is being explored. The analytical methodologies associated with these capillary separation techniques are being advanced through the development of retention programming instumentation/techniques and new strategies for performing optical detection. The advantages of laser fluorimetry are extended through the inclusion of fluorogenic, reagents in the running buffer. These reagents include oligonucleotide intercalation reagents for detecting DNA fragments. Chemiluminescence detection using post-capillary reactors/flow cells is also in progress. Successful development of these separation and detection systems will fill current voids in the capabilities of capillary separation techniques.

  3. Advanced converter technology. Technical progress report, May 23, 1979-May 22, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Banic, C. V.; Eckhouse, S. A.; Kornbrust, F. J.; Lipman, K.; Peterson, J. L.; Rosati, R. W.

    1980-01-01

    The overall objective of this program is to define an advanced converter system employing 1980's technology in all subsystem and component areas for use in electrochemical energy storage systems. Additional experimental effort will validate elements of the advanced commutation circuitry on a full-scale breadboard basis. Improved models of battery electrical characteristics are beng defined and experimental apparatus is being designed to measure these characteristics and to enable better definition of the battery-power conditioner interface. Improvement of energy-storage system performance through modification of battery converter characteristics will also be investigated. During this first year of the contract, a new more advanced concept for power conditioning based on a concept defined by United Technologies Corporation for fuel cell use was evaluated. This high switching frequency concept has the potential for significantly reducing the size and cost of battery plant power conditioners. As a result, the Department of Energy authorized redirection of the program to first evaluate this new concept and then to reorient the program to adopt this concept as the primary one. Progress is reported. (WHK)

  4. Solvent refined coal (SRC) process. Quarterly technical progress report, January 1980-March 1980. [In process streams

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This report summarizes the progress of the Solvent Refined Coal (SRC) project at the SRC Pilot Plant in Fort Lewis, Wahsington, and the Process Development Unit (P-99) in Harmarville, Pennsylvania. After the remaining runs of the slurry preheater survey test program were completed January 14, the Fort Lewis Pilot Plant was shut down to inspect Slurry Preheater B and to insulate the coil for future testing at higher rates of heat flux. Radiographic inspection of the coil showed that the welds at the pressure taps and the immersion thermowells did not meet design specifications. Slurry Preheater A was used during the first 12 days of February while weld repairs and modifications to Slurry Preheater B were completed. Two attempts to complete a material balance run on Powhatan No. 6 Mine coal were attempted but neither was successful. Slurry Preheater B was in service the remainder of the quarter. The start of a series of runs at higher heat flux was delayed because of plugging in both the slurry and the hydrogen flow metering systems. Three baseline runs and three slurry runs of the high heat flux program were completed before the plant was shut down March 12 for repair of the Inert Gas Unit. Attempts to complete a fourth slurry run at high heat flux were unsuccessful because of problems with the coal feed handling and the vortex mix systems. Process Development Unit (P-99) completed three of the four runs designed to study the effect of dissolver L/D ratio. The fourth was under way at the end of the period. SRC yield correlations have been developed that include coal properties as independent variables. A preliminary ranking of coals according to their reactivity in PDU P-99 has been made. Techniques for studying coking phenomenona are now in place.

  5. Advanced thermally stable jet fuels: Technical progress report, October 1994--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Boehman, A.; Coleman, M.M.

    1995-02-01

    There are five tasks within this project on thermally stable coal-based jet fuels. Progress on each of the tasks is described. Task 1, Investigation of the quantitative degradation chemistry of fuels, has 5 subtasks which are described: Literature review on thermal stability of jet fuels; Pyrolytic and catalytic reactions of potential endothermic fuels: cis- and trans-decalin; Use of site specific {sup 13}C-labeling to examine the thermal stressing of 1-phenylhexane: A case study for the determination of reaction kinetics in complex fuel mixtures versus model compound studies; Estimation of critical temperatures of jet fuels; and Surface effects on deposit formation in a flow reactor system. Under Task 2, Investigation of incipient deposition, the subtask reported is Uncertainty analysis on growth and deposition of particles during heating of coal-derived aviation gas turbine fuels; under Task 3, Characterization of solid gums, sediments, and carbonaceous deposits, is subtask, Studies of surface chemistry of PX-21 activated carbon during thermal degradation of jet A-1 fuel and n-dodecane; under Task 4, Coal-based fuel stabilization studies, is subtask, Exploratory screening and development potential of jet fuel thermal stabilizers over 400 C; and under Task 5, Exploratory studies on the direct conversion of coal to high quality jet fuels, are 4 subtasks: Novel approaches to low-severity coal liquefaction and coal/resid co-processing using water and dispersed catalysts; Shape-selective naphthalene hydrogenation for production of thermally stable jet fuels; Design of a batch mode and a continuous mode three-phase reactor system for the liquefaction of coal and upgrading of coal liquids; and Exploratory studies on coal liquids upgrading using mesopores molecular sieve catalysts. 136 refs., 69 figs., 24 tabs.

  6. Methyl chloride via oxyhydrochlorination of methane. Quarterly technical progress report No. 7, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The purpose of this contract is to develop a process for converting light alkane gases to methyl chloride via oxyhydrochlorination using highly selective, stable catalysts in fixed-bed reactors designed to remove the large amount of heat generated, so as to control the reaction temperature. Further, the objective is to obtain the engineering data base necessary for developing a commercially feasible process and to evaluate the economics of the process. Several key technology areas were evaluated this quarter. The catalyst definition effort focused on the determination of the role of the Li and La promoters that have been found to be useful in enhancing Cu based oxyhydrochlorination of methane catalysts. Initial experiments show that the La acts to provide a much more active catalyst than the Cu only case. The role of the Li is ambiguous at this point. The Li enhances the stability of the La promoted catalyst, but gives only marginal improvement by itself This work will be continued, with additional emphasis on the analysis of the catalysts to determine the structural role that the promoters may play. The separation unit operation definition made significant progress by demonstrating in a laboratory system that a process solvent may be used to remove the product CH{sub 3}Cl from the reactor effluent stream. To date the data has been qualitative, but clear. Work will continue to gather the information possible in the laboratory to help with PDU design. An extensive amount of testing was performed on the chosen process solvent, Multitherm. A comprehensive review of all the thermal testing and associated FTIR, UV/VIS, and physical property testing is included in this report. This work shows that Multitherm should give the desired stability and solubility that are necessary to make the separation unit operation successful.

  7. Directional backlight liquid crystal autostereoscopic display: technical challenges, research progress, and prospect (Conference Presentation)

    Science.gov (United States)

    Fan, Hang; Li, Kunyang; Zhou, Yangui; Liang, Haowen; Wang, Jiahui; Zhou, Jianying

    2016-09-01

    Recent upsurge on virtual and augmented realities (VR and AR) has re-ignited the interest to the immerse display technology. The VR/AR technology based on stereoscopic display is believed in its early stage as glasses-free, or autostereoscopic display, will be ultimately adopted for the viewing convenience, visual comfort and for the multi-viewer purposes. On the other hand, autostereoscopic display has not yet received positive market response for the past years neither with stereoscopic displays using shutter or polarized glasses. We shall present the analysis on the real-world applications, rigid user demand, the drawbacks to the existing barrier- and lenticular lens-based LCD autostereoscopy. We shall emphasize the emerging autostereoscopic display, and notably on directional backlight LCD technology using a hybrid spatial- and temporal-control scenario. We report the numerical simulation of a display system using Monte-Carlo ray-tracing method with the human retina as the real image receiver. The system performance is optimized using newly developed figure of merit for system design. The reduced crosstalk in an autostereoscopic system, the enhanced display quality, including the high resolution received by the retina, the display homogeneity without Moiré- and defect-pattern, will be highlighted. Recent research progress including a novel scheme for diffraction-free backlight illumination, the expanded viewing zone for autostereoscopic display, and the novel Fresnel lens array to achieve a near perfect display in 2D/3D mode will be introduced. The experimental demonstration will be presented to the autostereoscopic display with the highest resolution, low crosstalk, Moiré- and defect- pattern free.

  8. Technical Progress Report on Single Pass Flow Through Tests of Ceramic Waste Forms for Plutonium Immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, P; Roberts, S; Bourcier, W

    2000-12-01

    This report updates work on measurements of the dissolution rates of single-phase and multi-phase ceramic waste forms in flow-through reactors at Lawrence Livermore National Laboratory. Previous results were reported in Bourcier (1999). Two types of tests are in progress: (1) tests of baseline pyrochlore-based multiphase ceramics; and (2) tests of single-phase pyrochlore, zirconolite, and brannerite (the three phases that will contain most of the actinides). Tests of the multi-phase material are all being run at 25 C. The single-phase tests are being run at 25, 50, and 75 C. All tests are being performed at ambient pressure. The as-made bulk compositions of the ceramics are given in Table 1. The single pass flow-through test procedure [Knauss, 1986 No.140] allows the powdered ceramic to react with pH buffer solutions traveling upward vertically through the powder. Gentle rocking during the course of the experiment keeps the powder suspended and avoids clumping, and allows the system to behave as a continuously stirred reactor. For each test, a cell is loaded with approximately one gram of the appropriate size fraction of powdered ceramic and reacted with a buffer solution of the desired pH. The buffer solution compositions are given in Table 2. All the ceramics tested were cold pressed and sintered at 1350 C in air, except brannerite, which was sintered at 1350 C in a CO/CO{sub 2} gas mixture. They were then crushed, sieved, rinsed repeatedly in alcohol and distilled water, and the desired particle size fraction collected for the single pass flow-through tests (SPFT). The surface area of the ceramics measured by BET ranged from 0.1-0.35 m{sup 2}/g. The measured surface area values, average particle size, and sample weights for each ceramic test are given in the Appendices.

  9. Improved methods for water shutoff. Final technical progress report, October 1, 1997--September 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Seright, R.S.; Liang, J.T.; Schrader, R.; Hagstrom, J. II; Liu, J.; Wavrik, K.

    1998-10-01

    In the United States, more than 20 billion barrels of salt water are produced each year during oilfield operations. A tremendous economic incentive exists to reduce water production if that can be accomplished without significantly sacrificing hydrocarbon production. This three-year research project had three objectives. The first objective was to identify chemical blocking agents that will (a) during placement, flow readily through fractures without penetrating significantly into porous rock and with screening out or developing excessive pressure gradients and (b) at a predictable and controllable time, become immobile and resistant breakdown upon exposure to moderate to high pressure gradients. The second objective was to identify schemes that optimize placement of the above blocking agents. The third objective was to explain why gels and other chemical blocking agents reduce permeability to one phase (e.g., water) more than that to another phase (e.g., oil or gas). The authors also wanted to identify conditions that maximize this phenomenon. This project consisted of three tasks, each of which addressed one of the above objectives. This report describes work performed during the third and final period of the project. During this three-year project, they: (1) Developed a procedure and software for sizing gelant treatments in hydraulically fractured production wells; (2) Developed a method (based on interwell tracer results) to determine the potential for applying gel treatments in naturally fractured reservoirs; (3) Characterized gel properties during extrusion through fractures; (4) Developed a method to predict gel placement in naturally fractured reservoirs; (5) Made progress in elucidating the mechanism for why some gels can reduce permeability to water more than that to oil; (6) Demonstrated the limitations of using water/oil ratio diagnostic plots to distinguish between channeling and coning; and (7) Proposed a philosophy for diagnosing and attacking water

  10. Aligning Mathematics Assessment Standards: New Mexico and the 2009 National Assessment of Educational Progress (NAEP). REL Technical Brief. REL 2008-No. 011

    Science.gov (United States)

    Shapley, Kathy L.; Brite, Jessica

    2008-01-01

    This technical brief examines the current alignment between the New Mexico Standards Based Assessment (NMSBA) standards and the 2009 National Assessment of Educational Progress (NAEP) mathematics framework. It looks at the extent to which current state assessment standards cover the content on which 2009 NAEP assessments will be based. Applying…

  11. Savannah River Ecology Laboratory Annual Technical Progress Report of Ecological Research, June 30, 2001

    Energy Technology Data Exchange (ETDEWEB)

    Bertsch, Paul M.; Janecek, Laura; Rosier, Brenda

    2001-06-30

    The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA) and has been conducting ecological research on the Savannah River Site (SRS) in South Carolina for 50 years. The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts fundamental and applied ecological research, as well as education and outreach programs, under a Cooperative Agreement with the U.S. Department of Energy (DOE) SRS near Aiken, South Carolina. The Laboratory's research mission during the 2001 fiscal year was fulfilled with the publication of one book and 83 journal articles and book chapters by faculty, technical staff, students, and visiting scientists. An additional 77 journal articles have been submitted or are in press. Other noteworthy events took place as faculty members and graduate students received awards. These are described in the section Special Accomplishments of Faculty, Staff, Students, and Administration on page 54. Notable scientific accomplishments include work conducted on contaminant transport, global reptile decline, phytoremediation, and radioecology. Dr. Domy Adriano authored the second edition of his book ''Trace Elements in Terrestrial Environments: Biogeochemistry, Bioavailability, and Risks of Metals'', which was recently published by Springer-Verlag. The book provides a comprehensive treatment of many important aspects of trace elements in the environment. The first edition of the book, published in 1986, has become a widely acclaimed and cited reference. International attention was focused on the problem of reptile species decline with the publication of an article on this topic in the journal ''Bioscience'' in August, 2000. The article's authors included Dr. Whit Gibbons and a number of other SREL herpetologists who researched the growing worldwide problem of decline of reptile species. Factors related

  12. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Progress report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, Kjetil; Bartzke, Gundula; Broeseth, Henrik; Dahl, Espen Lie; Gjershaug, Jan Ove; Hanssen, Frank; Jacobsen, Karl-Otto; Kleven, Oddmund; Kvaloey, Paal; May, Roel; Meaas, Roger; Nygaaard, Torgeir; Resnaes, Steinar; Stokke, Sigbjoern; Thomassen, Joern

    2012-07-01

    birds in the database, compared to only 117 a year earlier. WP5 - 'A Least Cost Path (LCP) toolbox for optimal route routing of power lines', has developed an LCP-pilot to demonstrate the LCP method, based on the impact studies were undertaken prior to construction of a 420 kV transmission line in Central Norway 2005. Relevant economic, ecological and technological environment criteria based on suggestions from interested users (NGOs, government, industry, etc.), was used. LCP-pilot and a fuzzy-logic approach of this was demonstrated in the first dialogue-based workshop, 23.-24. april 2012. The seminar, which had an emphasis on criteria definitions were followed up with a working seminar that focused criterion values ??on 20 november 2012. Lecture - 'A Least Cost Path (LCP) Toolbox for Optimal Routing of Power Lines, -was presented and submitted as contributions to the conference report from 'The 10th ROW Conference' in Arizona, 'The 32nd Annual Conference of the International Association for Impact Assessment (IAIA12) ' in Porto, Portugal, and 'The ESRI European User Conference' in Oslo. WP6 - 'Birds and camouflaging of power lines', has almost completed the final report, 'Power line camouflaging. An assessment of the ecological and technical challenges'. 'Because of the budget situation in CEDREN However, completion of the report postponed until the end of April 2013. WP7 - 'Effect of line marking / modifications remedial measures against bird mortality' has almost completed the final report 'Opportunities and limitations in terms of reducing mortality in birds due to collision and electrocution.' Due to overall budget situation in CEDREN the report deferred to the end of april 2013. WP8, 'guidelines for technological solutions that may reduce mortality in birds because of the power line's', has focused topics relating to the labeling, design, insulation, camouflage and wiring. The results, which are presented in the notes and articles, will be implemented in

  13. Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

    Science.gov (United States)

    Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

    2017-01-01

    This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

  14. Historical precedence and technical requirements of biological weapons use : a threat assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Estes, Daniel P.; Vogel, Kathleen Margaret; Gaudioso, Jennifer Marie; Hickok, Lauren T.; Jung, Danielle F.; Barnett, Natalie Beth; Frerichs, Rebecca L.; Salerno, Reynolds Mathewson

    2004-05-01

    The threat from biological weapons is assessed through both a comparative historical analysis of the patterns of biological weapons use and an assessment of the technological hurdles to proliferation and use that must be overcome. The history of biological weapons is studied to learn how agents have been acquired and what types of states and substate actors have used agents. Substate actors have generally been more willing than states to use pathogens and toxins and they have focused on those agents that are more readily available. There has been an increasing trend of bioterrorism incidents over the past century, but states and substate actors have struggled with one or more of the necessary technological steps. These steps include acquisition of a suitable agent, production of an appropriate quantity and form, and effective deployment. The technological hurdles associated with the steps present a real barrier to producing a high consequence event. However, the ever increasing technological sophistication of society continually lowers the barriers, resulting in a low but increasing probability of a high consequence bioterrorism event.

  15. Relevance of the neuropeptide Y system in the biology of cancer progression.

    Science.gov (United States)

    Ruscica, M; Dozio, E; Motta, M; Magni, P

    2007-01-01

    The peptides pancreatic polypeptide (PP), peptide YY (PYY), and neuropeptide Y (NPY) share a similar structure, known as PP-fold. Within this family of peptides, NPY, a highly conserved 36-aminoacid residue peptide, is involved in the regulation of a wide range of physiological functions, such as food intake and energy metabolism, as well as in the promotion of some remarkable aspects of tumor progression, including cell proliferation, matrix invasion, metastatization, and angiogenesis. NPY exerts its biological effects through five G-protein coupled receptors, named Y1-, Y2-, Y4-, Y5-, and y6-R, which appear associated with different aspects of oncogenesis. Y1-R seems involved in the modulation of cancer cell proliferation, whereas Y2-R activation appears to promote angiogenesis. The development of NPY receptor subtype selective analogs has helped to elucidate the physiological and pathophysiological role and localization of each receptor and may contribute to a better understanding of the receptor-ligand interaction. The NPY system appears to be variously associated with specific tumors, including neural crest-derived tumors, breast and prostate cancers. In addition to NPY, PYY is also able to affect cancer cell growth in a dose-dependent manner and through Y-Rs. In conclusion, peptides of the NPY family and the related receptors play an important role in the progression of different cancer types, with some molecular specificity according to each step of this process. On this basis, future studies may be directed to the implementation of novel diagnostic and therapeutic approaches targeting this system.

  16. 钛白粉生产工艺技术进展%Technical progress of titanium dioxide manufacturing processes

    Institute of Scientific and Technical Information of China (English)

    龚家竹

    2012-01-01

    简要介绍了钛白粉全球主要生产商和市场概况、原料加工工艺技术和现有的硫酸法、氯化法钛白粉生产工艺技术;也介绍了最新工艺中钛原料富集的替代金红石工艺(REPTILE)和钛铁矿焙烧磁选分离酸回收工艺(ERMS SR),以及盐酸法的(Altair)生产工艺和碱融法的绿色生产工艺等钛白粉生产工艺技术的最新进展.%Major global producers and markets of titanium dioxide were briefly reviewed.Titanium dioxide's raw material processing techniques and existing manufacturing processes,such as sulfuric acid process and chlorination process,were introduced.Latest titanium dioxide manufacturing processes,such as REPTILE and ERMS SR,as well as the technical progress in production technology of hydrochloric acid process (Altair),and in the green production technology of alkali molten process were also introduced.

  17. Fundamental characterization of alternate fuel effects in continuous combustion systems. Summary technical progress report, August 15, 1978-January 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Blazowski, W.S.; Edelman, R.B.; Wong, E.

    1980-02-27

    The overall objective of this contract is to assist in the development of fuel-flexible combustion systems for gas turbines as well as Rankine and Stirling cycle engines. The primary emphasis of the program is on liquid hydrocarbons produced from non-petroleum resources. Fuel-flexible combustion systems will provide for more rapid transition of these alternative fuels into important future energy utilization centers (especially utility power generation with the combined cycle gas turbine). The specific technical objectives of the program are: (a) develop an improved understanding of relationships between alternative fuel properties and continuous combustion system effects, and (b) provide analytical modeling/correlation capabilities to be used as design aids for development of fuel-tolerant combustion systems. This is the second major report of the program. Key experimental findings during this reporting period concern stirred combustor soot production during operation at controlled temperature conditions, soot production as a function of combustor residence time, an improved measurement technique for total hydrocarbons and initial stirred combustor results of fuel nitrogen conversion. While the results to be presented concern a stirred combustor which utilizes premixed fuel vapor/oxidant mixtures, a new combustor which combusts liquid fuel injected into the reactor as a spray has been developed and will be described. Analytical program progress includes the development of new quasiglobal models of soot formation and assessment of needs for other submodel development.

  18. Hot gas cleanup test facility for gasification and pressurized combustion. Quarterly technical progress report, January 1--March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    This quarterly technical progress report summarizes work completed during the Sixth Quarter of the First Budget Period, January 1 through March 31, 1992, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. The major emphasis during this reporting period was expanding the test facility to address system integration issues of hot particulate removal in advanced power generation systems. The conceptual design of the facility was extended to include additional modules for the expansion of the test facility, which is referred to as the Power Systems Development Facility (PSOF). A letter agreement was negotiated between Southern Company Services (SCS) and Foster Wheeler (FW) for the conceptual design of the Advanced Pressurized Fluid-Bed Combustion (APFBC)/Topping Combustor/Gas Turbine System to be added to the facility. The expanded conceptual design also included modifications to the existing conceptual design for the Hot Gas Cleanup Test Facility (HGCTF), facility layout and balance of plant design for the PSOF. Southern Research Institute (SRI) began investigating the sampling requirements for the expanded facility and assisted SCS in contacting Particulate Control Device (PCD) vendors for additional information. SCS also contacted the Electric Power Research Institute (EPRI) and two molten carbonate fuel cell vendors for input on the fuel cell module for the PSDF.

  19. Distribution of marine birds on Georges Bank and adjacent waters. Technical progress report, 1 January--31 August 1978

    Energy Technology Data Exchange (ETDEWEB)

    Powers, K.D.

    1978-10-01

    The work accomplished during the period covered in this technical progress report demonstrates the importance, interest, and necessity of a distribution study of marine birds in the Georges Bank area on a national and international scale. Cooperation was extended by the U.S. National Marine Fisheries Service, U.S. Fish and Wildlife Service, U.S. Coast Guard, and by the Canadian Wildlife Service, Halifax, N.S., AltantNIRO, Kaliningrad, USSR, and Federal Republic of Germany. Two sampling methods, fixed-area and total bird counts, were effectively employed, which allow comparable data bases with marine bird distribution information being collected in the North Pacific, Bering and Chukchi Seas (Outer Continental Shelf Energy Assessment Program), and in the North Atlantic and Canadian Arctic (CWS and The Seabird Group). A marine bird data retrieval bank is being developed for MBO seabird data at the USFWS Migratory Bird and Habitat Research Laboratory. A food habits bibliography and prey item/bird species summary table for marine birds in the western North Atlantic has been prepared from existing literature. Unpublished NMFS data on zooplankton/ichthyoplankton, and ground fish is being made available for possible correlations in distribution of selected prey items with bird species.

  20. Developments in breeding of Agaricus bisporus var. bisporus: progress made and technical and legal hurdles to take.

    Science.gov (United States)

    Sonnenberg, Anton S M; Baars, Johan J P; Gao, Wei; Visser, Richard G F

    2017-03-01

    True breeding of button mushrooms has hardly been done in the last decades, despite this species being one of the most cultivated mushrooms worldwide. Research done in the last 20 years has identified and characterised new germplasm and improved our understanding of the genetic base for some traits. A substantial collection of wild-collected strains is now available and partly characterised for a number of important traits such as disease resistance and yield. Most of the variations found in a number of important agronomic traits have a considerable heritability and are thus useful for breeding. Genetic marker technology has also developed considerably for this mushrooms in the last decade and used to identify quantitative trait loci (QTL) for important agronomic traits. This progress has, except for one example, not resulted so far into new commercially varieties. One of the reasons lies in the typical life cycle of the button mushroom Agaricus bisporus var. bisporus which hampers breeding. Joint investment is needed to solve technical problems in breeding. Special attention is needed for the protection of new varieties. Due to its typical life cycle, it is very easy to generate so called "look-a-likes" from protected cultivars by screening fertile single spore cultures. A consensus has been reached within the mushroom (breeding) industry to consider this method as the generation of essentially derived varieties as defined in plant breeding.

  1. High octane ethers from synthesis gas-derived alcohols. Quarterly technical progress report, July--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Klier, K.; Herman, R.G.; Feeley, O.C.; Johansson, M.A.

    1993-11-01

    The objective of the proposed research is to synthesize oxygenated fuel ethers, primarily methyl isobutyl ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from coal-derived H{sub 2}/CO/CO{sub 2} synthesis via alcohol mixtures that are rich in methanol and 2-methyl-1-proanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers. Both organic and inorganic catalysts will be investigated, and the better catalysts will be subjected to long term performance studies. The project is divided into the following three tasks: (1) synthesis of high octane ethers from alcohol mixtures containing predominantly methanol and 2-methyl-1-propanol over superacid resins, (2) inorganic catalysts for the synthesis of high octane ethers form alcohols, and (3) long term performance and reaction engineering for scale-up of the alcohols-to-ether process. A summary of technical progress is provided in this report.

  2. Micropore diffusion in coal chars under reactive conditions: Quarterly technical progress report, 15 March 1987-15 June 1987

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Perkins, M.T.; Lilly, W.D.

    1987-01-01

    In this third quarterly technical progress report, we present some initial data obtained with the ''gradientless'' reactor, and explore the effects of dispersion in the reactor sampling line. In particular: the gas sampling system and the solenoid valve network have been assembled and interfaced between the 3'' Berty catalytic reactor and the mass spectrometer beam system; initial purging experiments were conducted with this system, focusing on the convoluting effects of the sampling line on time constant measurements; it was shown and concluded that for the projected operating regime, the sampling line configuration without the in-line filter should not introduce any appreciable error in the measurements; and an analysis of the dispersion effects to be expected in the sampling line has defined the useful flow rate ranges for the current system and the means by which to extend the dynamic range; e.g., by increasing the length of the small bore diameter tubing. 21 refs., 11 figs.

  3. Using progressive concept maps as a strategy for teaching and learning in teacher education in Biology

    Directory of Open Access Journals (Sweden)

    Conceição Aparecida Soares Mendonça

    2013-02-01

    Full Text Available This paper presents a study carried out with Biology teachers under training, and aimed at investigating how concept maps enabled meaningful learning. The work was motivated by the fact that future teachers presented difficulties learning various concepts. In this light, maps can be a valuable instrument for the diagnosis and assessment of learning, enabling better concept learning. Thus, during our pedagogical intervention, we have strived to identify the conceptual evolution of students, through the construction of concept maps before, during and after the study of a proposed theme. The qualitative analysis of the produced maps focused on the processes of teaching, learning and assessment. At this point, the goal was to investigate whether or not students were able to relate the concepts under study, according to the principles of progressive differentiation and integrative reconcilitation. This was done while searching for evidences of meaningful learning.The pedagogical intervention lasted for 45 hours (8 meetings, during which a Zoology topic, concept Elephants was studied at a State university of Brazil. The qualitative analysis of the maps created by the learners has shown, in 58% of the cases, that there was an evolution of the learnersʼ knowledge of the theme. Obtained results suggest that maps have an efficient functional action and help improve the professional profile under formation.

  4. Bio-electrospraying and cell electrospinning: progress and opportunities for basic biology and clinical sciences.

    Science.gov (United States)

    Poncelet, Denis; de Vos, Paul; Suter, Nicolai; Jayasinghe, Suwan N

    2012-01-11

    Engineering of functional tissues is a fascinating and fertile arena of research and development. This flourishing enterprise weaves together many areas of research to tackle the most complex question faced to date, namely how to design and reconstruct a synthetic three-dimensional fully functional tissue on demand. At present our healthcare is under threat by several social and economical issues together with those of a more scientific and clinical nature. One such issue arises from our increasing life expectancy, resulting in an ageing society. This steeply growing ageing society requires functional organotypic tissues on demand for repair, replacement, and rejuvenation (R(3) ). Several approaches are pioneered and developed to assist conventional tissue/organ transplantation. In this Progress Report, "non-contact jet-based" approaches for engineering functional tissues are introduced and bio-electrosprays and cell electrospinning, i.e., biotechniques that have demonstrated as being benign for directly handling living cells and whole organisms, are highlighted. These biotechniques possess the ability to directly handle heterogeneous cell populations as suspensions with a biopolymer and/or other micro/nanomaterials for directly forming three-dimensional functional living reconstructs. These discoveries and developments have provided a promising biotechnology platform with far-reaching ramifications for a wide range of applications in basic biological laboratories to their utility in the clinic.

  5. Progress in small-angle scattering from biological solutions at high-brilliance synchrotrons

    Directory of Open Access Journals (Sweden)

    Anne T. Tuukkanen

    2017-09-01

    Full Text Available Small-angle X-ray scattering (SAXS is an established technique that provides low-resolution structural information on macromolecular solutions. Recent decades have witnessed significant progress in both experimental facilities and in novel data-analysis approaches, making SAXS a mainstream method for structural biology. The technique is routinely applied to directly reconstruct low-resolution shapes of proteins and to generate atomistic models of macromolecular assemblies using hybrid approaches. Very importantly, SAXS is capable of yielding structural information on systems with size and conformational polydispersity, including highly flexible objects. In addition, utilizing high-flux synchrotron facilities, time-resolved SAXS allows analysis of kinetic processes over time ranges from microseconds to hours. Dedicated bioSAXS beamlines now offer fully automated data-collection and analysis pipelines, where analysis and modelling is conducted on the fly. This enables SAXS to be employed as a high-throughput method to rapidly screen various sample conditions and additives. The growing SAXS user community is supported by developments in data and model archiving and quality criteria. This review illustrates the latest developments in SAXS, in particular highlighting time-resolved applications aimed at flexible and evolving systems.

  6. [Progress in sodium channelopathies and biological functions of voltage-gated sodium channel blockers].

    Science.gov (United States)

    Wang, Hongyan; Gou, Meng; Xiao, Rong; Li, Qingwei

    2014-06-01

    Voltage-gated sodium channels (VGSCs), which are widely distributed in the excitable cells, are the primary mediators of electrical signal amplification and propagation. They play important roles in the excitative conduction of the neurons and cardiac muscle cells. The abnormalities of the structures and functions of VGSCs can change the excitability of the cells, resulting in a variety of diseases such as neuropathic pain, epilepsy and arrhythmia. At present, some voltage-gated sodium channel blockers are used for treating those diseases. In the recent years, several neurotoxins have been purified from the venom of the animals, which could inhibit the current of the voltage-gated sodium channels. Usually, these neurotoxins are compounds or small peptides that have been further designed and modified for targeted drugs of sodium channelopathies in the clinical treatment. In addition, a novel cysteine-rich secretory protein (CRBGP) has been isolated and purified from the buccal gland of the lampreys (Lampetra japonica), and it could inhibit the Na+ current of the hippocampus and dorsal root neurons for the first time. In the present study, the progress of the sodium channelopathies and the biological functions of voltage-gated sodium channel blockers are analyzed and summarized.

  7. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Passiakos, M.

    1982-06-01

    This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

  8. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1978-04-11

    This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index.

  9. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1976-04-01

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication.

  10. Constructing failure in big biology: The socio-technical anatomy of Japan's Protein 3000 Project.

    Science.gov (United States)

    Fukushima, Masato

    2016-02-01

    This study focuses on the 5-year Protein 3000 Project launched in 2002, the largest biological project in Japan. The project aimed to overcome Japan's alleged failure to contribute fully to the Human Genome Project, by determining 3000 protein structures, 30 percent of the global target. Despite its achievement of this goal, the project was fiercely criticized in various sectors of society and was often branded an awkward failure. This article tries to solve the mystery of why such failure discourse was prevalent. Three explanatory factors are offered: first, because some goals were excluded during project development, there was a dynamic of failed expectations; second, structural genomics, while promoting collaboration with the international community, became an 'anti-boundary object', only the absence of which bound heterogeneous domestic actors; third, there developed an urgent sense of international competition in order to obtain patents on such structural information.

  11. Correlation of Biological Characteristics of Smolts with Survival and Travel Time, 1987 Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Rondorf, Dennis W.; Beeman, John W.; Free, Mary E. (Seattle National Fishery Research Center, Columbia River Field Station, Cook, WA)

    1988-06-01

    The biological characteristics of smolts were examined to determine their effect on estimates of survival in the Columbia and Snake rivers. Freeze branded groups of steelhead trout (Salmo gairdneri) from Lyons Ferry State Fish Hatchery (SFH) and Wells SFH and spring chinook salmon (Oncorhynchus tshawytscha) from Winthrop National Fish Hatchery (NFH) were used to estimate survival. Past estimates of survival, using a ratio of test and control fish recaptured at McNary Dam, have resulted in estimates > 100%, presumably due to some unknown bias. Study objectives were to determine if stress and descaling, degree of smoltification, and prevalence of bacterial kidney disease (BKD) differed among test and control groups of fish, thereby biasing survival estimates. 19 refs., 20 figs., 10 tabs.

  12. Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Paul D. Ronney

    2004-08-26

    An ignition source was constructed that is capable of producing a pulsed corona discharge for the purpose of igniting mixtures in a test chamber. The corona generator can also be used as the ignition source for one cylinder on a test engine. The first tests were performed in a cylindrical shaped chamber to study the characteristics of the corona and analyze various electrode geometries. Next a test chamber was constructed that closely represented the dimensions of the combustion chamber of the test engine at USC. Combustion tests were performed in this chamber and various electrode diameters and geometries were tested. Higher peak pressures and faster pressure rise times were realized consistently in all test chambers versus standard spark plug ignition. A test engine was purchased for the project that has two spark plug ports per cylinder to The data acquisition and control system hardware for the USC engine lab was updated with new equipment. New software was also developed to perform the engine control and data acquisition functions including cylinder pressure monitoring. A ceramic corona electrode has been designed that fits in the new test engine and is capable of withstanding the pressures and temperatures encountered inside the combustion chamber. The corona ignition system was tested on the engine and an increase in both peak pressure and IMEP were seen in the initial test. There are issues that must be addressed before on-engine testing can continue such as EMF interference from the corona generator and electrical insulation on portions of the piston and cylinder head to prevent arcing. The EMF issue can be solved with proper shielding and grounding and various ceramic coatings are being researched for electrical insulation.

  13. Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang; R.C. Greenlund

    2002-12-31

    Michigan Technological University has demonstrated major inroads in establishing the viability of utilizing aluminum smelting by-product waste materials in lightweight concrete product applications. The research identified key elements of producing various forms of lightweight concrete products through utilizing various procedures and mixture components with the by-product materials. A process was developed through pilot plant testing that results in additional aluminum recovery at finer sizes, a clean returnable salt product through spray drying technology, and a low-salt-content oxide product with enough aluminum metal content that it can be used to form lightweight cementitious mixtures. Having three distinct products aids in generating favorable process economics. Revenue projections from aluminum recovery and salt recovery are enough to cover processing costs and create a cost-free oxide product to market for lightweight concrete applications. This supply side commercialization strategy offers aluminum by-product recyclers a potentially no cost product, which has been demonstrated through this project to create desirable and marketable lightweight concrete products of various forms. Environmental benefits to the public are tremendous. At best, all dross and salt cake materials have the potential to be completely recycled and utilized. At worst, disposal sites would see a reduced amount of material: a post processed oxide product with little salt and no hydrogen sulfide or ammonia gas generating capability, which, if isolated from high alkali conditions, would pose no reactivity concerns. The US aluminum industry has historically, along with the steel industry, been a leader in recycling metal. The findings from this project, increased metal recovery, improved salt recycling, and demonstrated end uses for oxide residues, will go a long way in helping the aluminum industry obtain 100% material utilization and zero discharge.

  14. Final Technical Report - Use of Systems Biology Approaches to Develop Advanced Biofuel-Synthesizing Cyanobacterial Strains

    Energy Technology Data Exchange (ETDEWEB)

    Pakrasi, Himadri [Washington Univ., St. Louis, MO (United States)

    2016-09-01

    The overall objective of this project was to use a systems biology approach to evaluate the potentials of a number of cyanobacterial strains for photobiological production of advanced biofuels and/or their chemical precursors. Cyanobacteria are oxygen evolving photosynthetic prokaryotes. Among them, certain unicellular species such as Cyanothece can also fix N2, a process that is exquisitely sensitive to oxygen. To accommodate such incompatible processes in a single cell, Cyanothece produces oxygen during the day, and creates an O2-limited intracellular environment during the night to perform O2-sensitive processes such as N2-fixation. Thus, Cyanothece cells are natural bioreactors for the storage of captured solar energy with subsequent utilization at a different time during a diurnal cycle. Our studies include the identification of a novel, fast-growing, mixotrophic, transformable cyanobacterium. This strain has been sequenced and will be made available to the community. In addition, we have developed genome-scale models for a family of cyanobacteria to assess their metabolic repertoire. Furthermore, we developed a method for rapid construction of metabolic models using multiple annotation sources and a metabolic model of a related organism. This method will allow rapid annotation and screening of potential phenotypes based on the newly available genome sequences of many organisms.

  15. Circulating nucleic acids and hemostasis: biological basis behind their relationship and technical issues in assessment.

    Science.gov (United States)

    Danese, Elisa; Montagnana, Martina; Fava, Cristiano; Guidi, Gian Cesare

    2014-10-01

    Nucleic acids (NAs) constitute the backbone of cellular life permitting conservation, transmission, and execution of genetic information. In the past few years, new unexpected functions for NAs, projecting them also beyond nuclear and cellular boundaries have been recognized: circulating cell-free nucleic acids (cfNAs), histones, DNA-histone complexes, microRNAs (miRs) may have a regulatory role in physiological and pathological processes. In particular, several lines of evidence suggest that they can constitute unconventional mediators of thrombus formation, intervening both in hemostasis and thrombosis. Furthermore, in the past decade, the possibility to detect and quantify these in plasma and/or in serum has led to their ancillary use as potential markers in various medical conditions. The use of these as markers within the fields of thrombosis and hemostasis looks promising: the potential implications include the possibility to assess patients' risk profiles for thrombotic events and the identification of more directed targets for pharmacologic intervention. The major impediment is that, to date, the methods by which NAs are explored, still largely differ between published studies and standardized procedures are still lacking. Future research should focus on the physiological mechanisms underlying the activities of such mediators in specific thrombotic conditions and on the definition of reliable methods for their quantification in biological fluids.

  16. Healy clean coal project. Quarterly technical progress report No. 16-19, October 1, 1994--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This Quarterly Technical Progress Report is required under U.S. Department of Energy (DOE) Cooperative Agreement, Section XV, {open_quotes}Reporting Requirements{close_quotes} and Attachment C, {open_quotes}Federal Assistance Reporting Checklist{close_quotes}. It covers the period of October 1, 1994 through September 30, 1995. The primary objective of the HCCP is to conduct a cost-sharing project that will demonstrate a new power plant design which features innovative integration of an advanced combustor and heat recovery system coupled with both high and low temperature emission control processes. The parties anticipate that if the demonstration project is successful, the technology could become commercialized in the near term and will be capable of (1) achieving significant reductions in the emissions of sulfur dioxide and the oxides of nitrogen from existing facilities to minimize environmental impacts such as transboundary and interstate pollution and/or (2) providing for future energy needs in an environmentally acceptable manner. The primary equipment elements comprising this new power plant design includes entrained combustion systems coupled with a boiler which will produce low NOx levels, function as a limestone calciner and first stage SO{sub 2} remover in addition to its heat recovery function; a single spray dryer absorber vessel for second stage sulfur removal; a baghouse for third stage sulfur and particulate removal; and a lime activation system which recovers unused reagent from particulate collected in the baghouse. The emission levels Of SO{sub 2}, NOx, and particulate to be demonstrated are expected to be better than the federal New Source Performance Standards (NSPS).

  17. Micropore diffusion in coal chars under reactive conditions: Quarterly technical progress report, 15 September 1986-15 December 1986

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.

    1986-01-01

    This project is concerned with the development of a new technique for measuring the rates of diffusion of gases on the microporous structure of coal chars. Mass transport in pores of molecular dimensions is known to be an activated, relatively slow process. The gasification of coal chars may be transport-limited. To correlate and predict gasification reactivity, it is quite important to know over what range of conditions such limitations may control. The initial transient behavior of a gaseous species exposed to such chars primarily reflects the transport resistance offered by the micropores. When this process is conducted using a well-defined perturbation in a mixed reactor, the diffusion step can often be separated from the subsequent reaction steps, so that measurements can be conducted under actual gasification conditions. We will apply this technique to a few well-characterized coal/carbon chars. Micropore diffusion times in these samples will be determined for various gaseous species relevant to the gasification environments. The primary variables will be temperature and degree of conversion (i.e., burn-off). Measurements will be examined with respect to changes occurring in the pore structure of the chars. In this first quarterly technical progress report, the background and objectives of the study and the requisite experimental preparations to begin the micropore diffusion studies are presented. In particular, during the reporting period: the graduate assistant on this project conducted a literature review of the general area of micropore diffusion and began to acquire the necessary background for the experimental study; the inception of a pore model was undertaken involving micropore diffusion; and the Autoclave Engineers 3'' Berty catalytic reactor has been refurbished and modified for the study. 59 refs., 2 figs.

  18. Current progress of the biological single-ion microbeam at FUDAN.

    Science.gov (United States)

    Wang, X F; Li, J Q; Wang, J Z; Zhang, J X; Liu, A; He, Z J; Zhang, W; Zhang, B; Shao, C L; Shi, L Q

    2011-08-01

    A biological microbeam for precisely positioned single-ion/single cell irradiation is built in the Institute of Modern Physics in Fudan University, Shanghai, China, based on the tandem accelerator (2 × 3MV) in the laboratory. In this paper, the developing progress of the FUDAN microbeam is reported, including the newly constructed beam line, the microbeam collimator, the ion detection system, and the cell-imaging and targeting systems. Statistical models are proposed for evaluating the spatial resolution and dosage precision of the microbeam. By taking the collimated ions as a Gaussian beam, the spatial resolution can be evaluated by the full width at half maximum of the 2-D Gaussian distribution, which is determined by fitting the proportions of peripheral pits outside specific radii in the pit clusters etched on ion track detectors to a 2-D Gaussian distribution. In the preset hitting of defined ion number, by taking the real delivered number of ions as an independent identically distributed random variable (iidrv), according to the Law of Large Numbers and Central Limit Theorem, the expected value μ and standard deviation σ of the real delivered ion number in a preset N-ion hitting can be determined by approaching the normal distribution of N (μ, σ (2)/n) with the proportions of the mean counts of pits in multiple pit clusters on ion track detectors. By the values of μ, σ and additional assumptions, statistical dosage precision evaluations can be made on the preset hitting. From the linear fit curve of μ(N) and the power function fit curve of σ(N) on different preset ion numbers, characteristic factors k, b, A, p can be extracted for a precision evaluation independent of the specific preset ion number.

  19. Somatostatin, somatostatin analogs and somatostatin receptor dynamics in the biology of cancer progression.

    Science.gov (United States)

    Ruscica, M; Arvigo, M; Steffani, L; Ferone, D; Magni, P

    2013-05-01

    The pharmacological effects (i.e., inhibition of endocrine secretion and cell proliferation) mediated by the hormone somatostatin (SRIF) are derived from its universal high-affinity binding to five different G proteincoupled receptors (GPCRs), named sst1-5. However, SRIF has a half-life of less than 3 min, whereas the available mono- and bi-specific SRIF preferential analogs show prolonged half-life and increased potency. These compounds may control tumor development, cell proliferation and metastatization by direct actions, including cell division arrest in G0/G1 phase (i.e., induction of cyclin-dependent kinase inhibitor p27(kip1) or p21(Cip1)), induction of apoptosis (i.e., induction of p53 and Bax) and suppression of cell invasion. Along with these direct actions on the biology of cancer progression, in vivo SRIF analogs may also regulate tumor growth through indirect actions, by suppressing the secretion of growth-promoting hormones and growth factors and angiogenesis. Interestingly, when ssts are co-expressed, they may interact forming homo- or heterodimers, also with other GPCRs such as type 2 dopamine receptor and the μ-opioid receptor 1, altering their original pharmacological and functional properties. Dimers can be not only constitutive, but perhaps also ligandpromoted: hence, compounds with high affinity for different ssts isoforms may be used to achieve effects elicited by specific dimers. Future developments in the knowledge of ssts dynamics upon SRIF and SRIF analogs binding in neoplastic tissues may allow the full elucidation of the pathophysiological role of this system and the exploitation of the therapeutic potential of its modulation.

  20. DOE Final Technical Report (2009-2016): "Research Projects for Interrogations of Biological Systems: Training for the Development of Novel Radiotracers"

    Energy Technology Data Exchange (ETDEWEB)

    Jurisson, Silvia [University of Missouri-Columbia; Lever, Susan [University of Missouri-Columbia; Robertson, J. David [University of Missouri-Columbia

    2016-10-04

    This is the final technical report for DOE grant DE-SC-0002040, which was entitled "Research Projects for Interrogations of Biological Systems: Training for the Development of Novel Radiotracers". Included are the students and postdoctoral fellows trained, the publications, dissertations, presentations, and other deliverables for this project.

  1. Life sciences payloads analyses and technical program planning studies. [project planning of space missions of space shuttles in aerospace medicine and space biology

    Science.gov (United States)

    1976-01-01

    Contractural requirements, project planning, equipment specifications, and technical data for space shuttle biological experiment payloads are presented. Topics discussed are: (1) urine collection and processing on the space shuttle, (2) space processing of biochemical and biomedical materials, (3) mission simulations, and (4) biomedical equipment.

  2. Botanical inventory of the Rocky Flats AEC site: mapping methods and preliminary maps. Technical progress report, July 31, 1975--April 28, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Webber, P.J.; Clark, S.V.

    1976-01-01

    This Technical Progress Report represents a small but important part of the overall progress and research effort of this contract. It outlines the methods used to produce one 1:12,000 colored vegetation map of the Rocky Flats site and its surrounding area and six black and white 1:500 vegetation maps of intensively studied experimental plots. These maps are already being used by various researchers and it is appropriate that the mapping methods be detailed prior to the final contract report so that their use may be optimised. (auth)

  3. GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 1 April 1996--29 September 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-20

    This technical progress report discusses work on the Radioisotope Generators and Ancillary Activities for the Cassini spacecraft. The Cassini spacecraft is expected to launch in October 1997, and will explore Saturn and its moons. This progress report discusses issues in: spacecraft integration and liason, engineering support, safety, qualified unicouple fabrication, ETG fabrication and testing, ground support equipment, RTG shipping and launch support, designs, reviews and mission application. Safety analysis of the RTGs during reentry and launch accidents are covered. This report covers the period of April 1 to September 29, 1996.

  4. 新世纪不饱和聚酯树脂纵横谈%TECHNICAL PROGRESS OF UNSATURATED POLYESTER RESIN AT HOME AND ABROAD IN THE NEW CENTURY

    Institute of Scientific and Technical Information of China (English)

    蔡永源; 于同福

    2001-01-01

    从国内外不同视角和纵横面,阐述目前国内外不饱和聚酯树脂(UPR)高分子材料发展概况、用途分配、加工及技术进展。%The production capacity,processing technology application and technical progress of unsaturated polyester resins at home and abroad in the new century were discribed in this paper.

  5. Active sites in char gasification. Quarterly technical progress report, 1 January 1984-31 March 1984. [Polymers of phenol-formaldehyde family; chars produced from model compounds

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Suubers, E.M.; Wojtowicz, M.; Lilly, W.

    1984-05-01

    This project is concerned with the study of the nature and behavior of active sites in gasification of chars produced from synthesized model compounds, primarily of the phenol-formaldehyde family of resins. The current technical progress report presents further developments on resin synthesis and characterization and the design of a pyro-gasifier reactor for transient kinetic studies of the chars produced from the model compounds. 7 references, 12 figures, 2 tables.

  6. SynTec Final Technical Report: Synthetic biology for Tailored Enzyme cocktails

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Janine [Novozymes, Inc., Davis, CA (United States); Teter, Sarah [Novozymes, Inc., Davis, CA (United States)

    2016-06-30

    Using a novel enzyme screening method inspired by synthetic biology, Novozymes developed new technology under SynTec which allows for more rapidly tailoring of enzyme cocktails. The methodology can be applied to specific feedstocks, and or coupled to address a specific hydrolytic conversion process context. Using combinatorial high throughput screening of libraries of enzyme domains, we can quickly assess which combination of catalytic modules delivers the best performance for a specific condition. To demonstrate the effectiveness of the screening process, we measured performance of the output catalytic cocktail compared to CTec3/HTec3. SynTec benchmark cocktail - blend of Cellic® CTec3 and HTec3. The test substrate was - ammonia fiber expansion pretreated corn stover (AFEX™ PCS).CTec3/HTec3 was assayed at the optimal pH and temperature, and also in the absence of any pH adjustment. The new enzyme cocktail discovered under SynTec was assayed in the absence of any pH adjustment and at the optimal temperature. Conversion is delivered by SynTec enzyme at significant dose reduction relative to CTec3/HTec3 at the controlled pH optimum, and without titrant required to maintain pH, which delivers additional cost savings relative to current state of the art process. In this 2.5 year $4M project, the team delivered an experimental cocktail that significantly outperformed CTec3/HTec3 for a specific substrate, and for specific hydrolysis conditions. As a means of comparing performance improvement delivered per research dollar spent, we note that SynTec delivered a similar performance improvement to the previous award, in a shorter time and with fewer resources than for the previously successful DOE project DECREASE, a 3.5 year, $25M project, though this project focused on a different substrate and used different hydrolysis conditions. The newly implemented technology for rapid sourcing of new cellulases and hemicellulases from nature is an example of Novozymes

  7. SOME METHODOLOGICAL TECHNIQUES OF ACTIVATION OF THE COGNITIVE INTEREST IN BIOLOGY CLASSES OF STUDENTS OF THE MEDICAL TECHNICAL PROFILE

    Directory of Open Access Journals (Sweden)

    V. N. Baranov

    2014-01-01

    Full Text Available Research objective. Identification of possibility of the modern pedagogical receptions in development of cognitive interest in students of a medico-technical profile at biology lessons.Research techniques. The theoretical: the analysis of psychology and pedagogical and methodical literature on a research problem, the teoretiko-methodical analysis of a studied problem, development of methodical bases of its realization in biology training; approach to carrying out a lecture and practical training in biology with bionics elements. The empirical – supervision, conversation, questioning, manufacture of multimedia presentations for carrying out an interactive lecture and practical training and the analysis of results of work with them.Material and methods. Students of the 1st course being trained in the direction of preparation 201000.62 – “Biotechnical systems and technologies” (bachelor degree.Results. It is possible to carry the following to the positive moments: within interactive lecture there is a tendency to motivation change to educational activity with external on the internal; the pedagogical receptions based on interactivity, allow to keep attention of audience easier; using problem situations, it was possible to involve pupils in educational activity selectively; when using considered approach process of communication with audience gains more natural character, approaching developing relationship in teacher student system to cooperation.It is possible to carry the next moments to the negative: process of teaching becomes more intense, deman­ding from the teacher of larger concentration on a training material, and constant readiness and ability to conduct discussion; the interactive format of giving of a training material sometimes possesses smaller informational characteristics; students are not always ready to such format of educational activity that is often shown in inability to carry on the free dialogue, inability to

  8. Identification of sulfur heterocycles in coal liquids and shale oils. Technical progress report, August 1, 1980-May 1, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M. L.; Castle, R. N.

    1981-01-01

    The sulfur heterocycle separation scheme which was described in the last progress report was evaluated for quantitative recovery of individual components. The results indicate that recoveries can range from 10% to approx. 30% depending on the structure of the compound. During this period, 23 unsubstituted sulfur-containing heterocyclic ring systems were synthesized in oder to confirm GC/MS identifications and for biological testing. The four possible 3-ring heterocycles and the thirteen possible 4-ring heterocycles were tested for mutagenic activity in the histidine reversion (Ames assay) system. One of the 3-ring isomers, naphtho(1,2-b)-thiophene, and six of the 4-ring isomers induced mutations in Salmonella test strains. One of these compounds, phenanthro(3,4-b)thiophene, displayed approximately the same mutagenic activity as benzo(a)pyrene. A two-step adsorption chromatographic procedure was developed in order to fractionate synthetic fuels into various chemical-type classes for studying the relative concentrations and mutagenic activities of the various types. An SRC-II Heavy Distillate was fractionated into aliphatic hydrocarbons, polycyclic aromatic hydrocarbons, sulfur heterocycles, indoles and carbazoles, azaarenes, and amino polycyclic aromatic hydrocarbons. It was found that the amino-PAH fraction contained most of the mutagenic activity. A survey was made for compounds containing both nitrogen and sulfur heteroatoms in their structures. A number of these compounds were detected by GC using nitrogen- and sulfur-selective detection.

  9. Biological effects of high strength electric fields on small laboratory animals. Interim progress report, March 9, 1976--September 8, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, R.D.; Kaune, W.T.; Decker, J.R.; Hjeresen, D.L.

    1976-09-01

    Progress is reported on a broad and comprehensive series of biological experiments made under strictly controlled laboratory conditions to screen for possible effects of exposure to 60-Hz electric fields on small laboratory animals. Electric field strengths comparable to and exceeding those under existing and anticipated transmission line designs will be used. Dosimetry studies will complement the animal studies to establish the relationship between tissue dose and any observed biological effects. Information derived from this project will provide a better basis for evaluating potential hazards of exposure to 60-Hz electric fields and help define parameters to be studied in clinical evaluations on humans.

  10. Impact of food and fluid intake on technical and biological measurement error in body composition assessment methods in athletes.

    Science.gov (United States)

    Kerr, Ava; Slater, Gary J; Byrne, Nuala

    2017-02-01

    Two, three and four compartment (2C, 3C and 4C) models of body composition are popular methods to measure fat mass (FM) and fat-free mass (FFM) in athletes. However, the impact of food and fluid intake on measurement error has not been established. The purpose of this study was to evaluate standardised (overnight fasted, rested and hydrated) v. non-standardised (afternoon and non-fasted) presentation on technical and biological error on surface anthropometry (SA), 2C, 3C and 4C models. In thirty-two athletic males, measures of SA, dual-energy X-ray absorptiometry (DXA), bioelectrical impedance spectroscopy (BIS) and air displacement plethysmography (BOD POD) were taken to establish 2C, 3C and 4C models. Tests were conducted after an overnight fast (duplicate), about 7 h later after ad libitum food and fluid intake, and repeated 24 h later before and after ingestion of a specified meal. Magnitudes of changes in the mean and typical errors of measurement were determined. Mean change scores for non-standardised presentation and post meal tests for FM were substantially large in BIS, SA, 3C and 4C models. For FFM, mean change scores for non-standardised conditions produced large changes for BIS, 3C and 4C models, small for DXA, trivial for BOD POD and SA. Models that included a total body water (TBW) value from BIS (3C and 4C) were more sensitive to TBW changes in non-standardised conditions than 2C models. Biological error is minimised in all models with standardised presentation but DXA and BOD POD are acceptable if acute food and fluid intake remains below 500 g.

  11. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 1. Geological environment of Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 1 of the progress report, describes first in detail the role of geological environment in high-level radioactive wastes disposal, the features of Japanese geological environment, and programs to proceed the investigation in geological environment. The following chapter summarizes scientific basis for possible existence of stable geological environment, stable for a long period needed for the HLW disposal in Japan including such natural phenomena as volcano and faults. The results of the investigation of the characteristics of bed-rocks and groundwater are presented. These are important for multiple barrier system construction of deep geological disposal. The report furthermore describes the present status of technical and methodological progress in investigating geological environment and finally on the results of natural analog study in Tono uranium deposits area. (Ohno, S.)

  12. Empirical Validation of a Modern Genetics Progression Web for College Biology Students

    Science.gov (United States)

    Todd, Amber; Romine, William L.

    2017-01-01

    Research in learning progressions (LPs) has been essential towards building understanding of how students' ideas change over time. There has been little work, however, into how ideas between separate but related constructs within a multi-faceted LP relate. The purpose of this paper is to elaborate on the idea of "progression webs" to…

  13. Radiation physics, biophysics, and radiation biology. Progress report, December 1, 1993--November 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hall, E.J.; Zaider, M.

    1994-05-01

    Research at the Center for Radiological Research is a blend of physics, chemistry and biology and epitomizes the multidisciplinary approach towards understanding the mechanisms involved in the health problems resulting from human exposure to ionizing radiations. To an increasing extent, the focus of attention is on biochemistry and the application of the techniques of molecular biology to the problems of radiation biology. Research highlights from the past year are briefly described.

  14. Design, construction, operation and evaluation of a prototype culm combustion boiler/heater unit. Technical progress report, October 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-02-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis and Limited Phase II - Prototype Plant Construction during the period October 1, 1979 through December 31, 1979. The objectives of the program as well as the technical progress and problem areas encountered are presented. Progress on the components and system engineering studies is described. The Preliminary Design of Prototype Unit Topical Report was submitted. Final design activity is continuing and the progress on drawing preparation and advanced procurement activity is discussed. Based on authorization for a limited amount of Phase II activity, initial Purchase Orders were released authorizing preparation of certified drawings for fabricated equipment required to support the Phase I final design activity. The Purchase Order for site clearance and installation of boiler foundations was awarded and ground breaking ceremonies were held at the Prototype Culm Combustion Boiler site in Paxinos, Pennsylvania, on December 7, 1979.

  15. 2012 Gordon Research Conference on Cellular and Molecular Fungal Biology, Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Berman, Judith [Univ. of Minnesota, Minneapolis, MN (United States)

    2012-06-22

    The Gordon Research Conference on Cellular and Molecular Fungal Biology was held at Holderness School, Holderness New Hampshire, June 17 - 22, 2012. The 2012 Gordon Conference on Cellular and Molecular Fungal Biology (CMFB) will present the latest, cutting-edge research on the exciting and growing field of molecular and cellular aspects of fungal biology. Topics will range from yeast to filamentous fungi, from model systems to economically important organisms, and from saprophytes and commensals to pathogens of plants and animals. The CMFB conference will feature a wide range of topics including systems biology, cell biology and morphogenesis, organismal interactions, genome organisation and regulation, pathogenesis, energy metabolism, biomass production and population genomics. The Conference was well-attended with 136 participants. Gordon Research Conferences does not permit publication of meeting proceedings.

  16. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Introductory part and summaries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan and comprises seven chapters. Chapter I briefly describes the importance of HLW management in promoting nuclear energy utilization. According to the long-term program, the HLW separated from spent fuels at reprocessing plants is to be vitrified and stored for a period of 30 to 50 years to allow cooling, then be disposed of in a deep geological formation. Chapter II mainly explains the concepts of geological disposal in Japan. Chapters III to V are devoted to discussions on three important technical elements (the geological environment of Japan, engineering technology and safety assessment of the geological disposal system) which are necessary for reliable realization of the geological disposal concept. Chapter VI demonstrates the technical ground for site selection and for setup of safety standards of the disposal. Chapter VII summarizes together with plans for future research and development. (Ohno, S.)

  17. Technical Assessment: Synthetic Biology

    Science.gov (United States)

    2015-01-01

    Journal of Industrial Microbiology & Biotechnology 33, no. 1 (January 2006): 29. 13 Like specialty materials, DoD has a range of unique needs in the...developing repositories to support their biotechnology industries, but there is not currently such an organization or plan in the US. Finally, regulatory...Emerging Research Field in China.” Biotechnology Advances 29, no. 6–3 (November 2011): 804–14. doi:10.1016/j.biotechadv.2011.06.008. Ratner, Tamar, Ron

  18. Biology Division progress report, October 1, 1978-May 31, 1980. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    Separate abstracts were prepared for each of the four sections into which this progress report has been divided. The report also contains sections related to interdivision activities and educational activities. (ERB)

  19. Recent progress in development of synthetic biology platforms and metabolic engineering of Corynebacterium glutamicum.

    Science.gov (United States)

    Woo, Han Min; Park, Jin-Byung

    2014-06-20

    The paradigm of synthetic biology has been evolving, along with relevant engineering, to achieve designed bio-systems. Synthetic biology has reached the point where it is possible to develop microbial strains to produce desired chemicals. Recent advances in this field have promoted metabolic engineering of Corynebacterium glutamicum as an amino-acid producer for use in intelligent microbial-cell factories. Here, we review recent advances that address C. glutamicum as a potential model organism for synthetic biology, and evaluate their industrial applications. Finally, we highlight the perspective of developing C. glutamicum as a step toward advanced microbial-cell factories that could produce valuable chemicals from renewable resources.

  20. Recent Progress of Propolis for Its Biological and Chemical Compositions and Its Botanical Origin

    Directory of Open Access Journals (Sweden)

    Viviane Cristina Toreti

    2013-01-01

    Full Text Available Propolis is the generic name given to the product obtained from resinous substances, which is gummy and balsamic and which is collected by bees from flowers, buds, and exudates of plants. It is a popular folk medicine possessing a broad spectrum of biological activities. These biological properties are related to its chemical composition and more specifically to the phenolic compounds that vary in their structure and concentration depending on the region of production, availability of sources to collect plant resins, genetic variability of the queen bee, the technique used for production, and the season in which propolis is produced. Many scientific articles are published every year in different international journal, and several groups of researchers have focused their attention on the chemical compounds and biological activity of propolis. This paper presents a review on the publications on propolis and patents of applications and biological constituents of propolis.

  1. Great Plains Coal Gasification Project: Quarterly technical progress report, April-June 1988 (Fourth fiscal quarter, 1987-1988)

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-29

    This progress report describes the operation of the Great Plains Gasification Plant, including lignite coal production, SNG production, gas quality, by-products, and certain problems encountered. (LTN)

  2. Materials compatibility and lubricants research on CFC-refrigerant substitutes. Quarterly technical progress report, 1 October 1992--31 December 1992

    Energy Technology Data Exchange (ETDEWEB)

    Hourahan, G.C.; Szymurski, S.R.

    1993-01-01

    The materials Compatibility and Lubricants Research (MCLR) program supports critical research to accelerate the introduction of CFC-refrigerant substitutes. The MCLR program addresses refrigerant and lubricant properties and materials compatibility. The primary elements of the work include data collection and dissemination, materials compatibility testing, and methods development. The work is guided by an Advisory committee consisting of technical experts from the refrigeration and air-conditioning industry and government agencies. Under the current MCLR program the Air-Conditioning and Refrigeration Technology Institute, Inc., (ARTI) is contracting and managing multiple research projects and a data collection and dissemination effort. Preliminary results from these projects are reported in technical progress reports prepared by each researcher.

  3. Novel CXCR3/CXCR7-Directed Biological Antagonist for Inhibition of Breast Cancer Progression

    Science.gov (United States)

    2012-09-01

    the role of CXCR4 in BrCa progression. 4 Figure 2. CXCR7 (G protein-independent) cell-signaling pathways. The GPCR , CXCR7 is hypothesized to... antibody responses. Aim Two will characterize the mechanisms of mut-CXCL11-Ig that modulate BrCa progression in the presence and absence of docetaxel...and iv) Micromet. Imagestream analysis of protein expression and localization: PE/Cy5 conjugated anti-human CXCR4 antibody (clone#12G5) was purchased

  4. 动力锂电池隔膜的技术要求及研究进展%Technical Requirements of Power Lithium Battery Diaphragm and Research Progress

    Institute of Scientific and Technical Information of China (English)

    李登科; 王丹

    2014-01-01

    This artical introduced the technical requirements of power lithium battery diaphragm, focused on the research progress of nonwoven membrane at home and abroad, nano fiber membrane, PA diaphragm, organic/inorganic composite film, ceramic coating membrane and other new diaphragm.%介绍了动力锂电池对隔膜的技术要求,重点介绍国内外无纺布隔膜、纳米纤维隔膜、PA隔膜,有机/无机复合膜,陶瓷涂层隔膜等新型隔膜的研究进展。

  5. GPHS-RTGs in support of the Cassini mission. Semi annual technical progress report, 2 October 1995--31 March 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-20

    The technical progress achieved during the period 2 October 1995 through 31 March 1996 on Contract No. DE-AC03-91SF18852, Radioisotope Generators and Ancillary Activities is described herein. This report is organized by the program task structure as follows: spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; contract acquired government-owned property (CAGO) acquisition; and program calendars.

  6. Recent progress in synthetic biology for microbial production of C3-C10 alcohols

    Directory of Open Access Journals (Sweden)

    Edna N. Lamsen

    2012-06-01

    Full Text Available The growing need to address current energy and environmental problems has sparked an interest in developing improved biological methods to produce liquid fuels from renewable sources. While microbial ethanol production is well established, higher chain alcohols possess chemical properties that are more similar to gasoline. Unfortunately, these alcohols (except 1-butanol are not produced efficiently in natural microorganisms, and thus economical production in industrial volumes remains a challenge. Synthetic biology, however, offers additional tools to engineer synthetic pathways in user-friendly hosts to help increase titers and productivity of these advanced biofuels. This review concentrates on recent developments in synthetic biology to produce higher-chain alcohols as viable renewable replacements for traditional fuel.

  7. Monthly progress abstracts of general research, liquid waste disposal research and biological research for September 1949

    Energy Technology Data Exchange (ETDEWEB)

    None

    1949-11-28

    Brief descriptions of progress are given in the areas of chemistry, physics, instrumentation (calorimetry), process development (electrolysis and waste disposal), electronics (alpha counters, trigger circuits, flow counter, and sliding pulse generator), health division (distribution of polonium in tissues, fluids, and excreta), instrumentation, and process engineering.

  8. New York City School Survey 2008-2010: Assessing the Reliability and Validity of a Progress Report Measure. Technical Appendices

    Science.gov (United States)

    Nathanson, Lori; Cole, Rachel; Kemple, James J.; Lent, Jessica; McCormick, Meghan; Segeritz, Micha

    2013-01-01

    The Research Alliance for New York City Schools examined Department of Education (DOE) School Survey data from 2008-2010 to better understand the richness and complexities of the information elicited by the Survey from parents, students, and teachers. This document provides the appendices to the technical report "New York City School Survey…

  9. Design, construction, operation, and evaluation of a prototype culm-combustion boiler/heater unit. Quarterly technical progress report, October 1-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-02-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis and Phase II - Prototype Plant Construction during the period October 1, 1980 through December 31, 1980. The objectives of the program as well as the technical progress and problem areas encountered during the reporting period are presented. The final detail design effort was completed and the final design report submitted. Progress on procurement activity authorized by full Phase II release on March 20, 1980, is discussed. Following approval by DOE, a purchase order was placed with the Norflor Construction Corporation for the prototype plant construction which began in November. Construction of the access roadway installation of the electric power, sewer and water lines was completed during this reporting period. Boiler construction continued.

  10. Bench-scale testing of on-line control of column flotation using a novel analyzer. Second quarterly technical progress report, January 1, 1993--March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-16

    This document contains the second quarterly technical progress report for PTI`s Bench-Scale Testing Project of a circuit integrating PTI`s KEN-FLOTE{trademark} Column Flotation Technology and PTI`s On-Line Quality Monitor and Control System. The twelve-month project involves installation and testing of a 200--300 lb/hr. bench-scale testing circuit at PETC`s Coal Preparation Process Research Facility (CPPRF) for two bituminous coals (Upper Freeport and Pittsburgh No. 8 Seam Raw Coals). The project schedule timeline by task series for the twelve month project, as it was laid out in the initial Project Work Plan. At the present time, all tasks are progressing according to schedule with the exception of the Task 800 Circuit Testing and Sample Prep and Task 1000 Circuit Decommissioning, which have slipped approximately five weeks due to delays incurred within in the project.

  11. High-temperature-turbine technology program. Phase II. Technology test and support studies. Technical progress report, April 1, 1979-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    Work performed on the High-Temperature-Turbine Technology Program, Phase II-Technology Test and Support Studies during the period from 1 April 1979 through 30 June 1979 is summarized. Objectives of the program elements as well as technical progress and problems during this Phase II quarterly reporting period are presented. Planned progress during the next quarterly reporting period is also defined. Testing of the LP rig engine with hot gas stream particulates simulating operation on low Btu gas is described. Fabrication of components and preparation of facilities for future tests of the Turbine Spool Technology Rig are discussed together with analytical reviews. Preparation of the low Btu gas synthesizing facility is discussed. Supporting Materials and Process investigations are described.

  12. Micropore diffusion in coal chars under reactive conditions: Quarterly technical progress report, 15 December 1986-15 March 1987. [Effect of activated diffusion in small pores

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Perkins, M.T.; Lilly, W.D.

    1987-01-01

    In this second quarterly technical progress report, we present some additional developments concerning the analysis of the effect of activated micropore diffusion on gasification reactivity, and report on progress with the experimental apparatus: (1) The Autoclave Engineers 3'' Berty catalytic reactor has been reassembled and tested, and has been found to function satisfactorily. However, the mass spectrometer malfunctioned and had to be repaired. (2) The effect of sorbate partial pressure on miropore diffusion and gasification reactivity have been examined. It was found that: pressure can have a significant effect on micropore diffusivities; increasing pressure generally increases the microparticle effectiveness factor for pressures far from saturation (while the opposite is true at near-saturation conditions); and the effect of sorbate partial pressure should be considered in conducting and interpreting measurements regarding micropore diffusion. 6 refs., 1 fig., 1 tab.

  13. Quarterly Progress Report on the Biological Monitoring Program for East Fork Poplar Creek

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S.M.; Ashwood, T.L.; Cicerone, D.S.; Greeley, M.S. Jr.; Hill, W.R.; Kszos, L.A.

    1996-12-30

    In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biological Monitoring and Abatement Program ( BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Lear et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity of EFPC. These tasks are (1) toxicity monitoring, (2) biological indicator studies, (3) bioaccumulation studies, and (4) ecological surveys of the periphyton, benthic macroinvertebrate, and fish communities.

  14. [Progress in study of flavonoids from Annonaceae and biological activities of these compounds].

    Science.gov (United States)

    Hu, Chun-Mei; Wu, Jiu-Hong

    2007-05-01

    More than 50 new flavonoids derived from Annonaceae are reported in the last two decades. Many genuses in Annonaceae contain flavonoids having structural novelty and broad pharmacological activities. Due to the pharmacological interest of some of these compounds, chemical investigations on this topic have grown considerably in the decades. Here the biological activities of some of these flavonoids are also briefly discussed.

  15. The search for life's origins: Progress and future directions in planetary biology and chemical evolution

    Science.gov (United States)

    1990-01-01

    The current state is reviewed of the study of chemical evolution and planetary biology and the probable future is discussed of the field, at least for the near term. To this end, the report lists the goals and objectives of future research and makes detailed, comprehensive recommendations for accomplishing them, emphasizing those issues that were inadequately discussed in earlier Space Studies Board reports.

  16. Recent progress in a classical biological control program for olive fruit fly in California

    Science.gov (United States)

    The olive fruit fly, Bactrocera oleae (Diptera: Tephritidae), causes severe damage to olive production worldwide. Control of olive fruit fly typically relies on pesticides, and under such conditions the impact of natural enemies is relatively low. About 15 years ago, the USDA-ARS European Biologic...

  17. Search for major genes with progeny test data to accelerate the development of genetically superior loblolly pine. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-15

    This report details the progress of the three tasks of this project. The tasks are: (1) develop genetic models and analytical methods; (2) molecular confirmation of major gene segregation; and (3) develop strategies for marker-assisted breeding.

  18. Biology, Therapy and Implications of Tumor Exosomes in the Progression of Melanoma

    Directory of Open Access Journals (Sweden)

    Allison L. Isola

    2016-12-01

    Full Text Available Cancer is the second leading cause of death in the United States, and about 6% of the estimated cancer diagnoses this year will be melanoma cases. Melanomas are derived from transformation of the pigment producing cells of the skin, melanocytes. Early stage melanoma is usually curable by surgical resection, but late stage or subsequent secondary metastatic tumors are treated with some success with chemotherapies, radiation and/or immunotherapies. Most cancer patients die from metastatic disease, which is especially the case in melanoma. A better understanding of tumor metastasis will provide insights and guide rational therapeutic designs. Recently, the importance of melanoma-derived exosomes in the progression of that cancer has become more apparent, namely, their role in various stages of metastasis, including the induction of migration, invasion, primary niche manipulation, immune modulation and pre-metastatic niche formation. This review focuses on the critical roles that melanoma exosomes play in the progression of this deadly disease.

  19. Biology, Therapy and Implications of Tumor Exosomes in the Progression of Melanoma

    Science.gov (United States)

    Isola, Allison L.; Eddy, Kevinn; Chen, Suzie

    2016-01-01

    Cancer is the second leading cause of death in the United States, and about 6% of the estimated cancer diagnoses this year will be melanoma cases. Melanomas are derived from transformation of the pigment producing cells of the skin, melanocytes. Early stage melanoma is usually curable by surgical resection, but late stage or subsequent secondary metastatic tumors are treated with some success with chemotherapies, radiation and/or immunotherapies. Most cancer patients die from metastatic disease, which is especially the case in melanoma. A better understanding of tumor metastasis will provide insights and guide rational therapeutic designs. Recently, the importance of melanoma-derived exosomes in the progression of that cancer has become more apparent, namely, their role in various stages of metastasis, including the induction of migration, invasion, primary niche manipulation, immune modulation and pre-metastatic niche formation. This review focuses on the critical roles that melanoma exosomes play in the progression of this deadly disease. PMID:27941674

  20. A systematic assessment of the state of hazardous waste clean-up technologies. Quarterly technical progress report, April 1--June 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Berg, M.T.; Reed, B.E.; Gabr, M.

    1993-07-01

    West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Report for Year 1 of the Agreement. This report reflects the progress and/or efforts performed on the following nine technical projects encompassed by the Year 1 Agreement for the period of April 1 through June 30, 1993: Systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies -- drain-enhanced soil flushing (DESF) for organic contaminants removal; site remediation technologies -- in situ bioremediation of organic contaminants; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors -- monolayer and multilayer self-assembled films for chemical sensors; Winfield lock and dam remediation; Assessments of Technologies for hazardous waste site remediation -- non-treatment technologies and pilot scale test facility implementation; and remediation of hazardous sites with stream reforming.

  1. Acid test of joint technical and biological measures in slope stabilisation - Impact analysis of the heavy rainstorm event in August 2005

    Science.gov (United States)

    Graf, F.; Böll, A.

    2009-04-01

    The persisting and heavy rainstorms from 20th to 22nd August in 2005 resulted in loss of human lives and tremendous damage on infrastructure all over Switzerland. Many of the measures taken hitherto to protect against such natural hazards were stressed to their limits or even beyond due to water saturation of the soils and extreme discharges of the torrents. This particular configuration offered the possibility to investigate the reliability of technical and biological measures taken within the scope of slope stabilisation, torrent and gully control. In the context of a joint project the ancient sliding area "Schwandrübi" in Dallenwil (Switzerland) providing joint technical and biological measures was chosen to address aspects concerning the reliability of technical supporting structures, the development of biological measures in the course of time and their performance under the extreme impact as well as the effects of biological measures on the stability of slopes. During 1981 and 1982 joint technical and biological measures had been taken on a large scale with minor follow-ups shortly after to stabilise the "Schwandrübi". The underlying strategy was based on several pilot surveys as thorough soil analysis, e.g. grain size distribution and determination of the angle of internal friction (Φ') related to the porosity (n) and the dry unit weight (γ), respectively. Basically, the spatial arrangement of the gabions was in accordance with the theoretical guidelines. However, based on the angle of internal friction (Φ') determined on the loose moraine soil material, it was not possible to meet the soil mechanical criterion of inclination between the constructions in all cases. Regardless of the extreme impact during the rainstorm (~100-year event), no serious damage occurred neither on the roughly 25-year old gabions nor on the torrent control structures. The recalculated peak discharge in the outlet channel was ~60 m3s-1 superimposed by high bed load

  2. [Research progress and trend analysis of biology and chemistry of Taxus medicinal resources].

    Science.gov (United States)

    Hao, Da-Cheng; Xiao, Pei-Gen; Peng, Yong; Liu, Ming; Huo, Li

    2012-07-01

    Taxus is the source plant of anti-cancer drug paclitaxel and its biosynthetic precursor, analogs and derivatives, which has been studying for decades. There are many endemic Taxus species in China, which have been studied in the field of multiple disciplines. Based on the recent studies of the researchers, this review comments on the study of Taxus biology and chemistry. The bibliometric method is used to quantify the global scientific production of Taxus-related research, and identify patterns and tendencies of Taxus-related articles. Gaps are present in knowledge about the genomics, epigenomics, transcriptomics, proteomics, metabolomics and bioinformatics of Taxus and their endophytic fungi. Systems biology and various omics technologies will play an increasingly important role in the coming decades.

  3. (Development and applications of photosensitive device systems to biological studies). Three year progress report

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1978-01-01

    The research has been directed to the two areas of x-ray diffraction and bioluminescence, with emphasis in the area of x-ray detection. Interest in x-ray image intensification techniques for biological and medical applications is long standing, and more and more utilized each year. During the past year, as the result of publications and participation in several workshops, the demonstrated advantages of our system over fast scan TV systems and multiwire chambers have become recognized, and several groups have requested us to supply them with a similar system. This is particularly true for use at the synchrotron x-ray sources. Although in recent years less effort has been spent in bioluminescence studies, results have been numerous, both in instrumentation development and experimental results. Bioluminescence is not only of interest in itself, but is a powerful tool for nondestructive study of other biological processes.

  4. Radiation physics, biophysics, and radiation biology. Progress report, December 1, 1992--November 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hall, E.J.; Zaider, M.

    1993-05-01

    Research at the Center for Radiological Research is a multidisciplenary blend of physics, chemistry and biology aimed at understanding the mechanisms involved in the health problems resulting from human exposure to ionizing radiations. The focus is increased on biochemistry and the application of the techniques of molecular biology to the problems of radiation biology. Research highlights of the program from the past year are described. A mathematical model describing the production of single-strand and double-strand breaks in DNA as a function radiation quality has been completed. For the first time Monte Carlo techniques have been used to obtain directly the spatial distribution of DNA moieties altered by radiation. This information was obtained by including the transport codes a realistic description of the electronic structure of DNA. We have investigated structure activity relationships for the potential oncogenicity of a new generation of bioreductive drugs that function as hypoxic cytotoxins. Experimental and theoretical investigation of the inverse dose rate effect, whereby medium LET radiations actually produce an c effect when the dose is protracted, is now at a point where the basic mechanisms are reasonably understood and the complex interplay between dose, dose rate and radiation quality which is necessary for the effect to be present can now be predicted at least in vitro. In terms of early radiobiological damage, a quantitative link has been established between basic energy deposition and locally multiply damaged sites, the radiochemical precursor of DNA double strand breaks; specifically, the spatial and energy deposition requirements necessary to form LMDs have been evaluated. For the first time, a mechanically understood ``biological fingerprint`` of high-LET radiation has been established. Specifically measurement of the ratio of inter-to intra-chromosomal aberrations produces a unique signature from alpha-particles or neutrons.

  5. Biological processes in the water column of the South Atlantic Bight: Phytoplankton response. Final progress report

    Energy Technology Data Exchange (ETDEWEB)

    Verity, P.G.; Yoder, J.A.

    1992-03-10

    This study addressed shelf-wide processes and nearshore (coastal boundary zone) processes occurring in the southeastern. Coastal boundary zone (CBZ) US continental shelf dynamics involve studies of circulation and of biological and chemical transformations. Continental shelf processes affect the removal of material from the coastal boundary zone into areas where the material no longer interacts with or influences concentrations in the CBZ. The two arbitrarily separate components are, in fact, unified. The CBZ typically extends about 300 km along-shore and about 20 km offshore from its center off Savannah, Georgia, where most runoff occurs. The rates of biological and chemical transformations are controlled by proximity to the bottom and the amounts of fine suspended organic matter originating from rivers and salt marshes. Once material is removed from this zone, either by a long-shelf or cross-shelf advection to regions where the materials are no longer in contact with the bottom, the suite of factors governing the rates of chemical and biological transformations changes. The determination of contrasting rates in these two environments was one of the central focuses of the South Atlantic Bight program.

  6. Both physical exercise and progressive muscle relaxation reduce the facing-the-viewer bias in biological motion perception.

    Directory of Open Access Journals (Sweden)

    Adam Heenan

    Full Text Available Biological motion stimuli, such as orthographically projected stick figure walkers, are ambiguous about their orientation in depth. The projection of a stick figure walker oriented towards the viewer, therefore, is the same as its projection when oriented away. Even though such figures are depth-ambiguous, however, observers tend to interpret them as facing towards them more often than facing away. Some have speculated that this facing-the-viewer bias may exist for sociobiological reasons: Mistaking another human as retreating when they are actually approaching could have more severe consequences than the opposite error. Implied in this hypothesis is that the facing-towards percept of biological motion stimuli is potentially more threatening. Measures of anxiety and the facing-the-viewer bias should therefore be related, as researchers have consistently found that anxious individuals display an attentional bias towards more threatening stimuli. The goal of this study was to assess whether physical exercise (Experiment 1 or an anxiety induction/reduction task (Experiment 2 would significantly affect facing-the-viewer biases. We hypothesized that both physical exercise and progressive muscle relaxation would decrease facing-the-viewer biases for full stick figure walkers, but not for bottom- or top-half-only human stimuli, as these carry less sociobiological relevance. On the other hand, we expected that the anxiety induction task (Experiment 2 would increase facing-the-viewer biases for full stick figure walkers only. In both experiments, participants completed anxiety questionnaires, exercised on a treadmill (Experiment 1 or performed an anxiety induction/reduction task (Experiment 2, and then immediately completed a perceptual task that allowed us to assess their facing-the-viewer bias. As hypothesized, we found that physical exercise and progressive muscle relaxation reduced facing-the-viewer biases for full stick figure walkers only. Our

  7. Progress in the synthesis of heteropolyoxometalate clusters and their applications in biological treatment

    Directory of Open Access Journals (Sweden)

    YAN Yuping

    2015-04-01

    Full Text Available Due to their unique physical and chemical properties,polyoxometalates (POMs attract more and more attention in recent years.In the POM′s research field,the coordination chemistry of transition metals/ rare earth metals with POM is one of the priorities.Their complex nanoparticles with polymers (such as starch,gelatin,chitosan,etc. have some advantage such as low toxicity and high efficiency in tumor therapy.This paper reviews the progress in the synthesis and the anti-tumor study of heteropolyoxometalate clusters.

  8. Silicon ribbon growth by a capillary action shaping technique. Annual report (Quarterly technical progress report No. 9)

    Energy Technology Data Exchange (ETDEWEB)

    Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

    1977-10-01

    Progress on the technological and economical assessment of ribbon growth of silicon by a capillary action shaping technique is reported. Progress in scale-up of the process from 50 mm to 100 mm ribbon widths is presented, the use of vitreous carbon as a crucible material is analyzed, and preliminary tests of CVD Si/sub 3/N/sub 4/ as a potential die material are reported. Diffusion length measurements by SEM, equipment and procedure for defect display under MOS structure in silicon ribbon for lifetime interpretation, and an assessment of ribbon technology are discussed. (WHK)

  9. Silicon ribbon growth by a capillary action shaping technique. Annual report (Quarterly technical progress report No. 9)

    Energy Technology Data Exchange (ETDEWEB)

    Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

    1977-10-01

    Progress on the technological and economical assessment of ribbon growth of silicon by a capillary action shaping technique is reported. Progress in scale-up of the process from 50 mm to 100 mm ribbon widths is presented, the use of vitreous carbon as a crucible material is analyzed, and preliminary tests of CVD Si/sub 3/N/sub 4/ as a potential die material are reported. Diffusion length measurements by SEM, equipment and procedure for defect display under MOS structure in silicon ribbon for lifetime interpretation, and an assessment of ribbon technology are discussed. (WHK)

  10. Developing and upgrading of solar system thermal energy storage simulation models. Technical progress report, March 1, 1978-August 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, J K; von Fuchs, G F; Warren, A W; Zob, A P

    1979-07-01

    The objective of the program are: 1) collect, standardize, and link existing TES models from the literature and other STO contractors; 2) correlate TES models with available TES component test data; 3) develop streamlined versions of validated TES component models; and 4) provide DOE and industry with a competent solar TES simulation tool. Progress during the reporting period was concerned primarily with the first and second objectives. A rock bed model was evolved and analytical results were correlated with component test data, and water tank model development was continued in detail. Progress is detailed. (WHK)

  11. Sequential chemical-biological processes for the treatment of industrial wastewaters: review of recent progresses and critical assessment.

    Science.gov (United States)

    Guieysse, Benoit; Norvill, Zane N

    2014-02-28

    When direct wastewater biological treatment is unfeasible, a cost- and resource-efficient alternative to direct chemical treatment consists of combining biological treatment with a chemical pre-treatment aiming to convert the hazardous pollutants into more biodegradable compounds. Whereas the principles and advantages of sequential treatment have been demonstrated for a broad range of pollutants and process configurations, recent progresses (2011-present) in the field provide the basis for refining assessment of feasibility, costs, and environmental impacts. This paper thus reviews recent real wastewater demonstrations at pilot and full scale as well as new process configurations. It also discusses new insights on the potential impacts of microbial community dynamics on process feasibility, design and operation. Finally, it sheds light on a critical issue that has not yet been properly addressed in the field: integration requires complex and tailored optimization and, of paramount importance to full-scale application, is sensitive to uncertainty and variability in the inputs used for process design and operation. Future research is therefore critically needed to improve process control and better assess the real potential of sequential chemical-biological processes for industrial wastewater treatment.

  12. 合成生物学发展现状与前景%Progress and perspective of synthetic biology

    Institute of Scientific and Technical Information of China (English)

    熊燕; 陈大明; 杨琛; 赵国屏

    2011-01-01

    合成生物学是综合了科学与工程的一个崭新的生物学研究领域,为生命现象及其运动规律的解析提供了一种采用“自下而上”合成策略的正向工程学的研究思路和方法手段,在经济和社会发展中具有巨大的应用开发潜力.近年来,DNA合成与系统生物学技术的发展使生命系统复杂基因回路的设计、合成与组装逐步成为可能,并应用于生物基化学品、生物燃料、医药中间体、保健产品的生产和环境保护等领域.但是,合成生物学的研究仍然面临科学、技术和伦理的挑战,只有积极地应对这些问题,在加大研究开发支持力度的同时,做好必要的风险监管,才能真正把握合成生物学发展带来的历史机遇.%Synthetic biology is an emerging field of biological research that combines science and engineering to study the mechanism of life and for a variety of technological applications. Research in synthetic biology has primarily focused on developing an engineering dogma for bottom-up design and synthesis of biological circuits from standardized parts and modules followed by optimizing their operation on well-characterized chassis, in vivo or in vitro. Recent progress in synthetic biology, such as significant improvements in efficient DNA/gene synthesis and ever increasing knowledge of biological systems via genomic and functional genomic analysis enables scientists to design and construct increasingly complex genetic devices and circuits, to synthesize and assembly bacterial genomes, and to develop artificially modified biological systems to produce renewable chemicals, biofuels, pharmaceutical intermediates, health care products and new tools for environment protection. However, neither the scientific complexity nor the technological uncertainty of the research has been thoroughly studied. In addition, the legal and ethical concerns of its social and humanitarian impact is largely yet to be addressed. Proper

  13. Current progress in the biology of members of the Sporothrix schenckii complex following the genomic era.

    Science.gov (United States)

    Mora-Montes, Héctor M; Dantas, Alessandra da Silva; Trujillo-Esquivel, Elías; de Souza Baptista, Andrea R; Lopes-Bezerra, Leila M

    2015-09-01

    Sporotrichosis has been attributed for more than a century to one single etiological agent, Sporothrix schencki. Only eight years ago, it was described that, in fact, the disease is caused by several pathogenic cryptic species. The present review will focus on recent advances to understand the biology and virulence of epidemiologically relevant pathogenic species of the S. schenckii complex. The main subjects covered are the new clinical and epidemiological aspects including diagnostic and therapeutic challenges, the development of molecular tools, the genome database and the perspectives for study of virulence of emerging Sporothrix species.

  14. Quarterly Progress Report - Biological Monitoring Program for East Fork Poplar Creek

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S.M.; Christensen, S.W.; Greeley, M.S. jr; Hill, W.R.; McCarthy, J.F.; Peterson, M.J.; Ryon, M.G.; Smith, J.G.; Southworth, G.R.; Stewart, A.J.

    2000-07-18

    In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Loar et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity of EFPC. These tasks are (1) toxicity monitoring, (2) biological indicator studies, (3) bioaccumulation studies, and (4) ecological surveys of the periphyton, benthic macroinvertebrate, and fish communities. Monitoring is currently being conducted at five primary EFPC sites, although sites may be excluded or added depending upon the specific objectives of the various tasks. Criteria used in selecting the sites include: (1) location of sampling sites used in other studies, (2) known or suspected sources of downstream impacts, (3) proximity to U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR) boundaries, (4) concentration of mercury in the adjacent floodplain, (5) appropriate habitat distribution, and

  15. Quarterly Progress Report - Biological Monitoring Program for East Fork Poplar Creek

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S.M.; Christensen, S.W.; Greeley, M.S.jr; Hill, W.R.; McCarthy, J.F.; Peterson, M.J.; Ryon, M.G.; Smith, J.G.; Southworth, G.R.; Stewart, A.J.

    2000-10-18

    In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Loar et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity of EFPC. These tasks are (1) toxicity monitoring, (2) biological indicator studies, (3) bioaccumulation studies, and (4) ecological surveys of the periphyton, benthic macroinvertebrate, and fish communities. Monitoring is currently being conducted at five primary EFPC sites, although sites may be excluded or added depending upon the specific objectives of the various tasks. Criteria used in selecting the sites include: (1) location of sampling sites used in other studies, (2) known or suspected sources of downstream impacts, (3) proximity to U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR) boundaries, (4) concentration of mercury in the adjacent floodplain, (5) appropriate habitat distribution, and

  16. Research progress in the phytochemistry and biology of Ilex pharmaceutical resources

    Directory of Open Access Journals (Sweden)

    Dacheng Hao

    2013-02-01

    Full Text Available Ilex is a botanical source for various health-promoting and pharmaceutically active compounds that have been used in traditional Chinese medicine and food for thousands of years. Increasing interest in Ilex pharmaceutical and food resources has led to additional discoveries of terpenoids, saponins, polyphenols (especially flavonoids, glycosides, and many other compounds in various Ilex species, and to investigation of their chemotaxonomy, molecular phylogeny and pharmacology. In continuation of our studies on Ilex pharmacology and phylogeny, we review the phytochemistry, chemotaxonomy, molecular biology and phylogeny of Ilex species and their relevance to health-promotion and therapeutic efficacy. The similarity and dissimilarity between Ilex paraguariensis, the source plant of mate tea, and the source plants of large-leaved Kudingcha (e.g., Ilex kudingcha and Ilex latifolia are discussed. It is essential to utilize emerging technologies in non-Camellia tea studies to promote the sustainable utilization of Ilex resources and the identification and development of novel compounds with potential health and clinical utility. Systems biology and “-omics” technologies will play an increasingly important role in pharmaceutical and food research on the bioactive compounds of Ilex species.

  17. Reflection Imaging X-Ray Laser Microscope (RIXRALM) and its biological applications. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Suckewer, S.

    1998-07-01

    The main stimulus for the development of the proposed microscope (RIXRALM) is the possibility to view the surface and near surface structure of biological materials, such as cell membranes at much higher resolution than an optical (confocal) microscope. Although the prediction resolution of RIXRALM was lower than a Scanning Electron Microscope (SEM), the possibility to obtain images of cells (membranes) in a more natural, hydrated state and, in many cases, without staining, made the idea of a reflection X-ray microscope very attractive. The specimen can be in an H{sub 2}O saturated He atmosphere at atmospheric pressure. As the image can be obtained quickly (nsec exposure, occurring within seconds of insertion into such an environment), the cell surface can be seen in a state which is very close to its natural condition. Besides, the short exposure time eliminates the effect of motional blurring on the images. Their X-ray reflection microscope fit well in the very large gap in the size of biological objects studied in light microscopy (sub-micron size) and electron microscope (down to a few nanometers size).

  18. Design, construction, operation and evaluation of a Prototype Culm Combustion Boiler/Heater Unit. Quarterly technical progress report, October 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-02-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis and Limited Phase II - Prototype Plant Construction during the period October 1, 1979 through December 31, 1979. The objectives of the program as well as the technical progress and problem areas encountered during the reporting period are presented. Progress on the components and system engineering studies is described. The Preliminary Design of Prototype Unit Topical Report was submitted during this reporting period. Final design activity is continuing and the progress on drawing preparation and advanced procurement activity is discussed. Based on authorization for a limited amount of Phase II activity, initial purchase orders were released authorizing preparation of certified drawings for fabricated equipment required to support the Phase I final design activity. The Purchase Order for site clearance and installation of boiler foundations was awarded during this reporting period and ground breaking ceremonies were held at the Prototype Culm Combustion Boiler site in Paxinos, Pennsylvania on December 7, 1979.

  19. High temperature turbine technology program. Phase II. Technology test and support studies. Annual technical progress report, January 1, 1979-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Work performed on the High Temperature Turbine Technology Program, Phase II - Technology Test and Support Studies during the period from January 1, 1979 through December 31, 1979 is summarized. Objectives of the program elements as well as technical progress and problems encountered during this Phase II annual reporting period are presented. Progress on design, fabrication and checkout of test facilities and test rigs is described. LP turbine cascade tests were concluded. 350 hours of testing were conducted on the LP rig engine first with clean distillate fuel and then with fly ash particulates injected into the hot gas stream. Design and fabrication of the turbine spool technology rig components are described. TSTR 60/sup 0/ sector combustor rig fabrication and testing are reviewed. Progress in the design and fabrication of TSTR cascade rig components for operation on both distillate fuel and low Btu gas is described. The new coal-derived gaseous fuel synthesizing facility is reviewed. Results and future plans for the supporting metallurgical programs are discussed.

  20. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 2. Engineering technology for geological disposal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the deep geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, part 2 of the progress report, concerns engineering aspect with reference to Japanese geological disposal plan, according to which the vitrified HLW will be disposed of into a deep, stable rock mass with thick containers and surrounding buffer materials at the depth of several hundred meters. It discusses on multi-barrier systems consisting of a series of engineered and natural barriers that will isolate radioactive nuclides effectively and retard their migrations to the biosphere environment. Performance of repository components, including specifications of containers for vitrified HLW and their overpacks under design as well as buffer material such as Japanese bentonite to be placed in between are described referring also to such possible problems as corrosion arising from the supposed system. It also presents plans and designs for underground disposal facilities, and the presumed management of the underground facilities. (Ohno, S.)

  1. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 3. Safety assessment for geological disposal systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 3 of the progress report, concerns safety assessment for geological disposal systems definitely introduced in part 1 and 2 of this series and consists of 9 chapters. Chapter I concerns the methodology for safety assessment while Chapter II deals with diversity and uncertainty about the scenario, the adequate model and the required data of the systems above. Chapter III summarizes the components of the geological disposal system. Chapter IV refers to the relationship between radioactive wastes and human life through groundwater, i.e. nuclide migration. In Chapter V is made a reference case which characterizes the geological environmental data using artificial barrier specifications. (Ohno. S.)

  2. Yucca Mountain Biological Resources Monitoring Program; Progress report, October 1992--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    The US Department of Energy (DOE) is required by the Nuclear Waste Policy Act of (as amended in 1987) to study and characterize the suitability of Yucca Mountain as a potential geologic repository for high-level nuclear waste. During site characterization, the DOE will conduct a variety of geotechnical, geochemical, geological, and hydrological studies to determine the suitability of Yucca Mountain as a potential repository. To ensure that site characterization activities do not adversely affect the environment at Yucca Mountain, a program has been implemented to monitor and mitigate potential impacts and ensure activities comply with applicable environmental regulations. This report describes the activities and accomplishments of EG&G Energy Measurements, Inc. (EG&G/EM) from October 1992 through December 1993 for six program areas within the Terrestrial Ecosystem component of the environmental program for the Yucca Mountain Site Characterization Project (YMP): Site Characterization Effects, Desert Tortoises (Gopherus agassizii), Habitat Reclamation, Monitoring and Mitigation, Radiological Monitoring, and Biological Support.

  3. Quarterly Progress Report - Biological Monitoring Program for East Fork Poplar Creek

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S. M.; Christensen, S. W.; Greeley, M.S. jr; McCracken, M.K.; Peterson, M.J.; Ryon, M.G.; Smith, J.G.; Southworth G. R.; Stewart, A. J.

    2001-01-19

    In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 National Security Complex (formerly the Oak Ridge Y-12 Plant). As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Complex protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Loar et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Complex on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Complex discharges on the aquatic integrity of EFPC. These tasks are (1) toxicity monitoring, (2) biological indicator studies, (3) bioaccumulation studies, and (4) ecological surveys of the periphyton, benthic macroinvertebrate, and fish communities. Monitoring is currently being conducted at five primary EFPC sites, although sites may be excluded or added depending upon the specific objectives of the various tasks. Criteria used in selecting the sites include: (1) location of sampling sites used in other studies, (2) known or suspected sources of downstream impacts, (3) proximity to U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR) boundaries, (4) concentration of mercury in the

  4. Quarterly Progress Report - Biological Monitoring Program for East Fork Poplar Creek

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S. M.; Christensen, S. W.; Greeley, M.S. jr; McCracken, M.K.; Peterson, M.J.; Ryon, M.G.; Smith, J.G.; Southworth G. R.; Stewart, A. J.

    2001-01-19

    In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 National Security Complex (formerly the Oak Ridge Y-12 Plant). As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Complex protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Loar et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Complex on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Complex discharges on the aquatic integrity of EFPC. These tasks are (1) toxicity monitoring, (2) biological indicator studies, (3) bioaccumulation studies, and (4) ecological surveys of the periphyton, benthic macroinvertebrate, and fish communities. Monitoring is currently being conducted at five primary EFPC sites, although sites may be excluded or added depending upon the specific objectives of the various tasks. Criteria used in selecting the sites include: (1) location of sampling sites used in other studies, (2) known or suspected sources of downstream impacts, (3) proximity to U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR) boundaries, (4) concentration of mercury in the

  5. Proofs of the Technical Results Justifying a Biologically Inspired Algorithm for Reactive Navigation of Nonholonomic Robots in Maze-Like Environments

    CERN Document Server

    Matveev, Alexey S; Savkin, Andrey V

    2011-01-01

    We present technical results justifying a method for guidance of a Dubins-like vehicle with saturated control towards a target in a steady simply connected maze-like environment. The vehicle always has access to to the target relative bearing angle and the distance to the nearest point of the maze if it is within the given sensor range. The proposed control law is composed by biologically inspired reflex-level rules. Mathematically rigorous analysis of this law is provided; its convergence and performance are confirmed by computer simulations and experiments with real robots.

  6. Laboratory and project based learning in the compulsory course Biological Chemistry enhancing collaboration and technical communication between groups

    DEFF Research Database (Denmark)

    Agersø, Yvonne; Bysted, Anette; Jensen, Lars Bogø

    2011-01-01

    The aim of this paper was to describe how changes of laboratory training and project based learning were implemented in order to train the students in making a study design, basic laboratory skills, handling of data, technical communication, collaboration and presentation....

  7. Fabrication of aggregation-induced emission based fluorescent nanoparticles and their biological imaging application: recent progress and perspectives

    Directory of Open Access Journals (Sweden)

    Bin Yang

    2016-06-01

    Full Text Available Aggregation-induced emission (AIE dyes have received wide-spread concern since their inception. Several types of AIE-based fluorescent nanoparticle (FNP have been developed, and the potential applications of these FNPs have also been explored. Recent studies of AIE-based FNPs in biological areas have suggested that they show promise as bio-materials for cell imaging and other biomedical applications. This article reviews recent progress in the synthesis of AIE-based FNPs via non-covalent, covalent and novel one-pot strategies, and the subsequent cell-imaging of those AIE-based FNPs. Many successes have been achieved, and there is still plenty of space for the development of AIE-based FNPs as new bio-materials.

  8. Engineering Development of Slurry Bubble Column Reactor (SBCR) Technology: Final quarterly technical progress no. 2, 1 July - 30 September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Toseland, B.A.; Tischer, R.E.

    1997-12-31

    The major technical objectives of this program are threefold: (1) to develop the design tools and a fundamental understanding of the fluid dynamics of a slurry bubble column reactor to maximize reactor productivity, (2) to develop the mathematical reactor design models and gain an understanding of the hydrodynamic fundamentals under industrially relevant process conditions, and (3) to develop an understanding of the hydrodynamics and their interaction with the chemistries occurring in the bubble column reactor. Successful completion of these objectives will permit more efficient usage of the reactor column and tighter design criteria, increase overall reactor efficiency, and ensure a design that leads to stable reactor behavior when scaling up to large diameter reactors.

  9. Biologic

    CERN Document Server

    Kauffman, L H

    2002-01-01

    In this paper we explore the boundary between biology and the study of formal systems (logic). In the end, we arrive at a summary formalism, a chapter in "boundary mathematics" where there are not only containers but also extainers ><, entities open to interaction and distinguishing the space that they are not. The boundary algebra of containers and extainers is to biologic what boolean algebra is to classical logic. We show how this formalism encompasses significant parts of the logic of DNA replication, the Dirac formalism for quantum mechanics, formalisms for protein folding and the basic structure of the Temperley Lieb algebra at the foundations of topological invariants of knots and links.

  10. Yucca Mountain Biological Resources Monitoring Program. Progress report, January 1994--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The US Department of Energy (DOE) is required by the Nuclear Waste Policy Act of 1982 (as amended in 1987) to study and characterize the suitability of Yucca Mountain as a potential geological repository for high-level nuclear waste. During site characterization, the DOE will conduct a variety of geotechnical, geochemical, geological, and hydrological studies to determine the suitability of Yucca Mountain as a potential repository. To ensure that site characterization activities do not adversely affect the environment at Yucca Mountain, a program has been implemented to monitor and mitigate potential impacts and ensure activities comply with applicable environmental regulations. This report describes the activities and accomplishments of EG and G Energy Measurements, Inc. (EG and G/EM) from January 1994 through December 1994 for six program areas within the Terrestrial Ecosystem component of the environmental program for the Yucca Mountain Site Characterization Project (YMP): Site Characterization Effects, Desert Tortoises (Gopherus agassizii), Habitat Reclamation, Monitoring and Mitigation, Radiological Monitoring, and Biological Support.

  11. POC-scale testing of an advanced fine coal dewatering equipment/technique. Quarterly technical progress report 2, January 1995--March 1995

    Energy Technology Data Exchange (ETDEWEB)

    Groppo, J.G.; Parekh, B.K.

    1995-05-05

    Froth flotation technique is an effective and efficient process for recovering of ultra-fine (minus 74 {mu}m) clean coal. Economical dewatering of an ultra-fine clean coal product to a 20 percent level moisture will be an important step in successful implementation of the advanced cleaning processes. This project is a step in the Department of Energy`s program to show that ultra-clean coal could be effectively dewatered to 20 percent or lower moisture using either conventional or advanced dewatering techniques. The cost-sharing contract effort is for 36 months beginning September 30, 1994. This report discusses technical progress made during the quarter from January 1 to March 31, 1995.

  12. Humic substances in performance assessment of nuclear waste disposal: Actinide and iodine migration in the far-field. Second technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Buckau, G. (ed.)

    2004-07-01

    The present report describes progress within the second year of the EC-project ''Humic Substances in Performance Assessment of Nuclear Waste Disposal: Actinide and Iodine Migration in the Far-Field''. Without being a formal requirement of the commission or co-funding bodies, this report documents results in great technical detail. It is an open report and thus makes the detailed results available to a broad scientific community. The report contains an executive summary written by the coordinator. More detailed results are given as individual contributions in the form of 23 annexes. Not all results are discussed or referred to in the executive summary report and thus readers with a deeper interest also need to consult the annexes. (orig.)

  13. Increased oil production and reserves from improved completion techniques in the Bluebell Field, Uinta Basin, Utah. Seventh quarterly technical progress report, April 1, 1995--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, C.D.

    1995-09-01

    The objective of this project is to increase oil production and reserves in the Uinta Basin by demonstrating improved completion techniques. Low productivity of Uinta Basin wells is caused by gross production intervals of several thousand feet that contain perforated thief zones, water-bearing zones, and unperforated oil-bearing intervals. Geologic and engineering characterization and computer simulation of the Green River and Wasatch formations in the Bluebell field will determine reservoir heterogeneities related to fractures and depositional trends. This will be followed by drilling and recompletion of several wells to demonstrate improved completion techniques based on the reservoir characterization. Transfer of the project results will be an ongoing component of the project. Technical progress for this quarter are discussed for subsurface and engineering studies.

  14. An Investigation of the Mechanism of IGA/SCC of Alloy 600 in Corrosion Accelerating Heated Crevice Environments. Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Lumsden, Jesse

    1999-01-01

    OAK-B135 An Investigation of the Mechanism of IGA/SCC of Alloy 600 in Corrosion Accelerating Heated Crevice Environments. Technical Progress Report. This program focuses on understanding the mechanisms causing corrosion damage to steam generator tubes in a pressurized water reactor (PWR) and the effects of the proposed remedial measures. The crevice formed by the tube/tube support plate (T/TSP) intersection in a PWR steam generator is a concentration site for nonvolatile impurities (referred to as hideout) in the steam generator water. The restricted mass transport in the small crevice volume prevents the species, which concentrate during the generation of steam, from quickly dispersing into the bulk water. The concentrated solutions in crevices have been a contributing cause of several forms of corrosion of steam generator tubes including intergranular attack/stress corrosion cracking (IGA/SCC), pitting, and wastage.

  15. The main technical progress directions in air-jet engine design branch, which are worked out by the “Single theory of continuous flow propulsions”

    Directory of Open Access Journals (Sweden)

    Борис Шамшадович Мамедов

    2016-03-01

    Full Text Available The main technical progress directions in air-jet engine design branch, which are worked out by the “Single theory of continuous flow propulsions” are highlighted. They are connected with providing the fly security by air-jet engines gas-dynamic work steady increasing with full elimination zone of rigid (spring stroke in the cross section B-B of the air-jet engines, with bypass turbojet engine’s thrust increasing with simultaneously fuel consumption lowering, with inlet and outlet decibel characteristic and radial dementias lowering, with high pressure compressor’s last working wheels blades increasing, with regulating law air-jet engine’s introduction to provide maximum thrust with the purpose of flying (thrust efficiency increasing

  16. High-temperature liquid-metal technology review. A Bimonthly Technical Progress Review, Volume 7, Number 2, April 1969

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1969-04-01

    The purpose of the High-Temperature Liquid-Metal Technology Review is to provide up-to-date information on the various research and development programs in the United States in the field of high-temperature liquid-metal technology. The method is to publish reviews prepared by members of the Department of Applied Science of the Brookhaven National Laboratory on current topical and progress reports submitted by contracting organizations. When results and conclusions are reported, it is intended that the individual reviews become both summaries and critiques. Thirteen reviews are presented in this issue.

  17. [Biology of cancer cell-stroma interaction in carcinogenesis and cancer progression].

    Science.gov (United States)

    Fujita, S; Sugihara, H; Ito, R; Tsuchihashi, Y

    1984-03-01

    Cancer cells are dependent on physical and chemical supports of stroma no less than non-cancerous cells and tissues are. The role of stroma should, therefore, be important in genesis and progression of cancers growing in vivo. But this aspect underlying carcinogenesis and manifestation of human cancers has long been neglected or attracted less attention in the investigations of oncology. Focusing particular attention on parenchyma-stromal interaction in gastrointestinal mucosa, the authors have found that, quite unexpectedly, in normal gastric as well as intestinal mucosa of all the animal species so for studied, vascularity is always poorly developed in the generative cell zones. Cross-sectional area of vascular bed is markedly reduced in this zone. Application of Hagen-Poiseulle law revealed that the reduced total cross-sectional area, resulting in a rapid drop in hydrostatic pressure, creates here a situation particularly favorable for proliferating cell population. Since the transport of water soluble material together with tissue fluid through the capillary wall is driven by the hydrostatic pressure, the generative cell zones are found to be present at the site where the turnover of the material is the most active. Before the zone of the rapid pressure drop, there appears zone of relatively high intravascular hydrostatic pressure, where secretory function seems to be facilitated. This zone, as is well known, corresponds to glandular portion of the mucosa. After the zone of the rapid pressure drop (in surface of the mucosa), zone of a low intravascular hydrostatic pressure appears, where absorptive function is to be facilitated. Within such zones, in gastric mucosa surface epithelium and in intestinal mucosa absorptive villi cells are located. It is likely that architecture of gastrointestinal epithelium and vascular pattern in the stroma is closely correlated and that the former is determined, at least partly, by the latter. When human gastric mucosa shows

  18. Direct probing of chromatography columns by laser-induced fluorescence. Technical progress report, September 1, 1989--February 28, 1993

    Energy Technology Data Exchange (ETDEWEB)

    McGuffin, V.L.

    1992-12-07

    This report summarizes the progress and accomplishments of this research project from September 1, 1989 to February 28, 1993. During this period, we have accomplished all of the primary scientific objectives of the research proposal: (1) constructed and evaluated a laser-induced fluorescence detection system that allows direct examination of the chromatographic column, (2) examined nonequilibrium processes that occur upon solute injection and elution, (3) examined solute retention in liquid chromatography as a function of temperature and pressure, (4) examined solute zone dispersion in liquid chromatography as a function of temperature and pressure, and (5) developed appropriate theoretical models to describe these phenomena. In each of these studies, substantial knowledge has been gained of the fundamental processes that are responsible for chromatographic separations. In addition to these primary research objectives, we have made significant progress in three related areas: (1) examined pyrene as a fluorescent polarity probe insupercritical fluids and liquids as a function of temperature and pressure, (2) developed methods for the class-selective identification of polynuclear aromatic hydrocarbons in coal-derived fluids by microcolumn liquid chromatography with fluorescence quenching detection, and (3) developed methods for the determination of saturated and unsaturated (including omega-3) fatty acids in fish oil extracts by microcolumn liquid chromatography with laser-induced fluorescence detection. In these studies, the advanced separation and detection techniques developed in our laboratory are applied to practical problems of environmental and biomedical significance.

  19. Interdisciplinary Research and Training Program in the Plant Sciences. Technical progress report, February 1, 1991--November 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Wolk, C.P.

    1992-07-01

    Research on plants continued. Topics include: Molecular basis of symbiotic plant-microbe interations; enzymatic mechanisms and regulation of plant cell wall biosynthesis; molecular mechanisms that regulate the expression of genes in plants; resistance of plants to environmental stress; studies on hormone biosynthesis and action; plant cell wall proteins; interaction of nuclear and organelle genomes; sensor transduction in plants; molecular mechanisms of trafficking in the plant cell; regulation of lipid metabolism; molecular bases of plant disease resistance mechanisms; biochemical and molecular aspects of plant pathogenesis; developmental biology of nitrogen-fixing cyanobacteria; environmental control of plant development and its relation to plant hormones.

  20. Advanced liquefaction using coal swelling and catalyst dispersion techniques. Quarterly technical progress report, April--June 1992

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, C.W. [Auburn Univ., AL (United States); Gutterman, C. [Foster Wheeler Development Corp., Livingston, NJ (United States); Chander, S. [Pennsylvania State Univ., University Park, PA (United States)

    1992-08-26

    Research in this project centers upon developing a new approach to the direct liquefaction of coal to produce an all-distillate product slate at a sizable cost reduction over current technology. The approach integrates all aspects of the coal liquefaction process including coal selection, pretreatment, coal swelling with catalyst impregnation, coal liquefaction experimentation, product recovery with characterization, alternate bottoms processing, and a technical assessment including an economic evaluation. The project is being carried out under contract to the United States Department of Energy. On May 28, 1992, the Department of Energy authorized starting the experimental aspects of this projects; therefore, experimentation at Amoco started late in this quarterly report period. Research contracts with Auburn University, Pennsylvania State University, and Foster Wheeler Development Corporation were signed during June, 1992, so their work was just getting underway. Their work will be summarized in future quarterly reports. A set of coal samples were sent to Hazen Research for beneficiation. The samples were received and have been analyzed. The literature search covering coal swelling has been up-dated, and preliminary coal swelling experiments were carried out. Further swelling experimentation is underway. An up-date of the literature on the liquefaction of coal using dispersed catalysts is nearing completion; it will be included in the next quarterly report.

  1. Technical progress and energy substitutions in transport sector; Progres techniques et substitutions energetiques dans le secteur des transports

    Energy Technology Data Exchange (ETDEWEB)

    Florane, Philippe

    2002-11-15

    Alternative motorization technologies have been proposed in order to achieve energy diversification and a reduction in pollutant emissions. Fuel cell vehicles are, among others, at the centre of research carried out by car manufacturers and oil companies. The use of fuel cell vehicles could contribute, first, to a less stringent long-term energy dependence of oil importing countries and, second, to pollutant reduction in the transport sector. First of all, we propose the definition of 'innovation' and its treatment in the frame of mainstream economic theories. Then we proceed to a retrospective analysis of diesel motorization of the car market. In the second part of our work, we conduct a survey among French households aiming to obtain up-to-date information about their degree of acceptance of fuel cell technology. We are concerned about highlighting the determining factors of fuel cell vehicle adoption by consumers. For this, we set up a discrete choice model linking the individual decision to the whole group of technical or socio-economical factors and characteristics. Finally, we develop patterns of fuel cell equipment of passenger cars which differ according to type of vehicle and possible purchase assistance. These patterns lead us to the analysis of long-term fuel cell vehicle development on the French car market. (author)

  2. Combustion characteristics of Douglas Fir planer shavings. Technical progress report No. 4, September 16, 1977--September 15, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Junge, D.C.

    1978-12-01

    Significant quantities of wood residue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the the combustion process in industrial boilers serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. This report presents data on the combustion characteristics of Douglas Fir planer shavings. The data were obtained in a pilot scale combustion test facility at Oregon State Univerisity. Other technical reports present data on the combustion characteristics of: Douglas Fir bark, Red Alder sawdust, Red Alder bark, Ponderosa pine bark, Hemlock bark, and Eastern White Pine bark. An executive summary report is also available which compares the combustion characteristics of the various fuel species.

  3. Advanced liquefaction using coal swelling and catalyst dispersion techniques. Quarterly technical progress report No. 7, April 1993--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, C.W. [Auburn Univ., AL (United States); Chander, S. [Pennsylvania State Univ., University Park, PA (United States); Gutterman, C.

    1994-09-01

    The overall objective of this project is to develop a new approach for the direct liquefaction of coal to produce an all-distillate product slate at a sizable cost reduction over current technology. The approach integrates coal selection, pretreatment, coal swelling with catalyst impregnation, liquefaction, product recovery with characterization, alternate bottoms processing, and carrying out a technical assessment including an economic evaluation. The project is being carried out under contract to the United States Department of Energy. All three coals used in this study (Black Thunder, Burning Star bituminous, and Martin Lake lignite) are effectively swelled by a number of solvents. The most effective solvents are those having hetero-functionality. In addition, a synergistic effect has been demonstrated, in which solvent blends are more effective for coal swelling than the pure solvents alone. Therefore, it will be necessary to use only low levels of swelling agents and yet promote the impregnation of catalyst precursors. The rate of the impregnation of catalyst precursors into swollen coal increases greatly as the effectiveness of the solvent to swell the coal increases. This effect is also demonstrated by improved catalyst precursor impregnation with increased contact temperature. Laboratory- and bench-scale liquefaction experimentation is underway using swelled and catalyst impregnated coal samples. Higher coal conversions were observed for the SO{sub 2}-treated coal than the raw coal, regardless of catalyst type. Conversions of swelled coal were highest when Molyvan-L, molybdenum naphthenate, and nickel octoate, respectively, were added to the liquefaction solvent.

  4. Projects at the Western Environmental Technology Office. Quarterly technical progress report, July 1, 1995--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The goal of this project is to demonstrate the technical and economic feasibility of commercializing a biotechnology that uses plants to remediate soils, sediments, surface waters, and groundwaters contaminated by heavy metals and radionuclides. This technology, known as phytoremediation, is particularly suited to remediation of soils or water where low levels of contaminants are widespread. Project objectives are to provide an accurate estimate of the capability and rate of phytoremediation for removal of contaminants of concern from soils and groundwaters at Department of Energy (DOE) sites and to develop data suitable for engineering design and economic feasibility evaluations, including methods for destruction or final disposition of plants containing contaminants of concern. The bioremediation systems being evaluated could be less expensive than soil removal and treatment systems, given the areal extent and topography of sites under consideration and the investment of energy and money in soil-moving and -treating processes. In situ technology may receive regulatory acceptance more easily than ex situ treatments requiring excavation, processing, and replacement of surface soils. In addition, phytoremediation may be viable for cleanup of contaminated waters, either as the primary treatment or the final polishing stage, depending on the contaminant concentrations and process economics considerations.

  5. An immunochemical approach to the study of DNA damage and repair. Technical progress report, May 1, 1989--April 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, S.S. [Vermont Univ., Burlington, VT (United States). Dept. of Microbiology and Molecular Genetics; Erlanger, B.F. [Columbia Univ., New York, NY (United States). Dept. of Microbiology

    1992-05-01

    The overall objective of this project has been to develop immunochemical methods to quantitate unique DNA base damages in order to facilitate studies on radiation-induced damage production and repair. Specifically, we have been using antibodies raised to damaged bases to quantitate unique lesions in model systems in order to evaluate their potential biological consequences. Our approach has been to synthesize modified nucleotides or nucleosides, conjugate them to protein carriers, and use the conjugates as immunogens in rabbits or to prepare monoclonal antibodies. We have been studying damages that are stable radiolysis products found in X-irradiated DNA and thus of potential biological consequence. Our aim is to build an in vitro and in vivo data base on the interactions between model DNA lesions and such cellular enzymes as DNA polymerases and repair endonucleases. Initial studies have focused on pyrimidine ring saturation products (thymine glycol.and dihydrothymine), products resulting from ring fragmentation or base loss (urea, {Beta}-ureidoisobutyric acid, abasic sites), 7-hydro-8-oxopurines, and more recently, cytosine radiolysis products. These modified bases serve as useful models for examining the potential lethal and/or mutagenic (carcinogenic) effects of the products of DNA radiolysis.

  6. Low-rank coal research under the UND/DOE cooperative agreement. Quarterly technical progress report, April 1983-June 1983

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, Jr., G. A.

    1983-01-01

    Progress reports are presented for the following tasks: (1) gasification wastewater treatment and reuse; (2) fine coal cleaning; (3) coal-water slurry preparation; (4) low-rank coal liquefaction; (5) combined flue gas cleanup/simultaneous SO/sub x/-NO/sub x/ control; (6) particulate control and hydrocarbons and trace element emissions from low-rank coals; (7) waste characterization; (8) combustion research and ash fowling; (9) fluidized-bed combustion of low-rank coals; (10) ash and slag characterization; (11) organic structure of coal; (12) distribution of inorganics in low-rank coals; (13) physical properties and moisture of low-rank coals; (14) supercritical solvent extraction; and (15) pyrolysis and devolatilization.

  7. SIMS three year study on statistics and environmental factors in health. Technical progress report No. 1. [Hazards of air pollution

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    Progress is reported for the activities of the Siam Institute for mathematics and society (SIMS), Columbia University, and Stanford University. The SIMS report is concerned with the use of animal experiments in establishing tolerance limits for human exposure to environmental toxicants; valid assessment of the health consequences of occupational and other specialized toxic exposures; mathematical theories for the kinetics of carcinogenesis; data coding, storage, access, and analysis, relationship between air pollution and respiratory diseases; and air pollution assessment. The Columbia University report is concerned with development of statistical methods and models for describing the effects of the environment, measured by pollution and weather variables, on respiratory diseases. The Stanford University report is concerned with spatial distribution of air pollutants, relation of pollutant concentrations to morbidity and mortality statistics, and other topics. (HLW)

  8. High resolution, low cost solar cell contact development. Quarterly technical progress and schedule report, September 28, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Mardesich, N.

    1980-01-01

    The scope of the contract covers the development and evaluation of forming solar cell collector grid contacts by the MIDFILM process. This is a proprietary process developed by the Ferro Corporation which is a subcontractor for the program. The MIDFILM process attains line resolution characteristics of photoresist methods with processing related to screen printing. The surface to be processed is first coated with a thin layer of photoresist material. Upon exposure to ultraviolet light through a suitable mask, the resist in the non-pattern area cross-links and becomes hard. The unexposed pattern areas remain tacky. The conductor material is applied in the form of a dry mixture of metal and frit particles which adhere to the tacky pattern area. The assemblage is then fired to ash the photopolymer and sinter the fritted conductor powder. Effort was concentrated during this period on the establishment, optimization and identification of problem areas of the MIDFILM process. Progress is reported. (WHK)

  9. Technical progress report for the Magnetohydrodynamics Coal-Fired Flow Facility: October 1, 1992--December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    Progress is reported on a multitask contract to develop technology for steam bottoming cycle of a Combined Cycle MHD Steam Power Plant. The report describes a 314 hour proof-of-concept (POC) test completed during the quarter. Results include secondary combustion and effect of potassium on the light-off temperature, fouling of heat transfer surfaces, particulate clean-up device performance and advanced diagnostic system performance. Test results on ceramic materials and tubes directed toward the development of a high temperature recuperative air heater are summarized. Results of data analysis of previous tests that are reported include the continuing analysis of tube materials that were exposed to 1500 and 2000 hours of eastern coal fired operation during the previously completed 2000 hour POC test series on eastern, high sulfur coal.

  10. Measurements of scattering processes in negative ion: Atom collisions. Technical progress report, 1 September 1991--31 December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1994-09-27

    This report describes the progress made on the research objectives during the past three years of the grant. This research project is designed to study various scattering processes which occur in H{sup {minus}} collisions with atomic (specifically, noble gas and atomic hydrogen) targets in the intermediate energy region. These processes include: elastic scattering, single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H{sup {minus}} is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements will provide total cross sections (TCS) initially, and once the angular positioning apparatus is installed, will provide angular differential cross sections (ADCS).

  11. Development and Validation of a Novel Scoring System for Predicting Technical Success of Chronic Total Occlusion Percutaneous Coronary Interventions: The PROGRESS CTO (Prospective Global Registry for the Study of Chronic Total Occlusion Intervention) Score.

    Science.gov (United States)

    Christopoulos, Georgios; Kandzari, David E; Yeh, Robert W; Jaffer, Farouc A; Karmpaliotis, Dimitri; Wyman, Michael R; Alaswad, Khaldoon; Lombardi, William; Grantham, J Aaron; Moses, Jeffrey; Christakopoulos, Georgios; Tarar, Muhammad Nauman J; Rangan, Bavana V; Lembo, Nicholas; Garcia, Santiago; Cipher, Daisha; Thompson, Craig A; Banerjee, Subhash; Brilakis, Emmanouil S

    2016-01-11

    This study sought to develop a novel parsimonious score for predicting technical success of chronic total occlusion (CTO) percutaneous coronary intervention (PCI) performed using the hybrid approach. Predicting technical success of CTO PCI can facilitate clinical decision making and procedural planning. We analyzed clinical and angiographic parameters from 781 CTO PCIs included in PROGRESS CTO (Prospective Global Registry for the Study of Chronic Total Occlusion Intervention) using a derivation and validation cohort (2:1 sampling ratio). Variables with strong association with technical success in multivariable analysis were assigned 1 point, and a 4-point score was developed from summing all points. The PROGRESS CTO score was subsequently compared with the J-CTO (Multicenter Chronic Total Occlusion Registry in Japan) score in the validation cohort. Technical success was 92.9%. On multivariable analysis, factors associated with technical success included proximal cap ambiguity (beta coefficient [b] = 0.88), moderate/severe tortuosity (b = 1.18), circumflex artery CTO (b = 0.99), and absence of "interventional" collaterals (b = 0.88). The resulting score demonstrated good calibration and discriminatory capacity in the derivation (Hosmer-Lemeshow chi-square = 2.633; p = 0.268, and receiver-operator characteristic [ROC] area = 0.778) and validation (Hosmer-Lemeshow chi-square = 5.333; p = 0.070, and ROC area = 0.720) subset. In the validation cohort, the PROGRESS CTO and J-CTO scores performed similarly in predicting technical success (ROC area 0.720 vs. 0.746, area under the curve difference = 0.026, 95% confidence interval = -0.093 to 0.144). The PROGRESS CTO score is a novel useful tool for estimating technical success in CTO PCI performed using the hybrid approach. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  12. Coal-fired combustion system for industrial process heating applications. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    PETC has implemented a number of advanced combustion research projects that will lead to the establishment of a broad, commercially acceptable engineering data base for the advancement of coal as the fuel of choice for boilers, furnaces, and process heaters. This includes new installations and those existing installations that were originally designed for oil or gas firing. The data generated by these projects must be sufficient for private-sector decisions on the feasibility of using coal as the fuel of choice. This work should also provide incentives for the private sector to continue and expand the development, demonstration, and application of these combustion systems. Vortec Corporation`s Coal-Fired Combustion System for Industrial Process Heating Applications is being developed under contract DE-AC22-91PC91161 as part of this DOE development program. The current contract represents the third phase of a three-phase development program. Phase I of the program addressed the technical and economic feasibility of the process, and was initiated in 1987 and completed 1989. Phase II was initiated in 1989 and completed in 1990. During Phase II of the development, design improvements were made to critical components and the test program addressed the performance of the process using several different feedstocks. Phase III of the program was initiated September 1991 and is scheduled for completion in 1994. The Phase III research effort is being focused on the development of a process heater system to be used for producing value-added vitrified glass products from boiler/incinerator ashes and selected industrial wastes.

  13. Innovative Clean Coal Technology (ICCT). Technical progress report, second & third quarters, 1993, April 1993--June 1993, July 1993--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese, and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal-fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels; (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}; and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties are being explored by constructing and operating a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. The demonstration is being performed at Gulf Power Company`s Plant Crist Unit No. 5 (75 MW capacity) near Pensacola, Florida. The project is funded by the U.S. Department of Energy (DOE), Southern Company Services, Inc. (SCS on behalf of the entire Southern electric system), the Electric Power Research Institute (EPRI), and Ontario Hydro. SCS is the participant responsible for managing all aspects of this project.

  14. Establishment of an Institute for Fusion Studies. Technical progress report, 1 November 1993--31 October 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hazeltine, R.D.

    1994-07-01

    The Institute for Fusion Studies is a national center for theoretical fusion plasma physics research. Its purposes are: (1) to conduct research on theoretical questions concerning the achievement of controlled fusion energy by means of magnetic confinement--including both fundamental problems of long-range significance, as well as shorter-term issues; (2) to serve as a national and international center for information exchange by hosting exchange visits, conferences, and workshops; (3) and to train students and postdoctoral research personnel for the fusion energy program and plasma physics research areas. The theoretical research results obtained by the Institute contribute to the progress of nuclear fusion research, whose goal is the development of fusion power as a basic energy source. Close collaborative relationships have been developed with other university and national laboratory fusion groups, both in the US and abroad. In addition to its primary focus on mainstream fusion physics, the Institute is also involved with research in fusion-sidestream fields, such as advanced computing techniques, nonlinear dynamics, space plasmas and astrophysics, statistical mechanics, fluid dynamics, and accelerator physics. Important research discoveries are briefly described.

  15. Molten Salt Coal Gasification Process Development Unit. Phase 2. Quarterly technical progress report No. 2, October-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    Slater, M. H.

    1981-01-20

    This represents the second quarterly progress report on Phase 2 of the Molten Salt Coal Gasification Process Development Unit (PDU) Program. Phase 1 of this program started in March 1976 and included the design, construction, and initial operation of the PDU. On June 25, 1980, Phase 2 of the program was initiated. It covers a 1-year operations program utilizing the existing PDU and is planned to include five runs with a targeted total operating time of 9 weeks. During this report period, Run 6, the initial run of the Phase 2 program was completed. The gasification system was operated for a total of 95 h at pressures up to 10 atm. Average product gas HHV values of 100 Btu/scf were recorded during 10-atm operation, while gasifying coal at a rate of 1100 lb/h. The run was terminated when the melt overflow system plugged after 60 continuous hours of overflow. Following this run, melt withdrawal system revisions were made, basically by changing the orifice materials from Monofrax to an 80 Cobalt-20 Chromium alloy. By the end of the report period, the PDU was being prepared for Run 7.

  16. 1991 Technical progress report of the University of South Carolina`s High Energy Physics Group, February 1990--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    The high energy physics group at the University of South Carolina includes five teaching faculty members, one research faculty member, and five graduate students. Profs. Childers, Darden, and Wilson devote most of their research effort to Fermilab experiment E789, which is designed to observe charmless two-body decays of b-flavored mesons and baryons. Prof. Wilson works on Fermilab experiment E687 which studies charm physics in the wide-band photon beam. Profs. Rosenfeld and Wang participate in the AMY collaboration, which studies electron-positron interactions using the TRISTAN collider at KEK. Prof. Rosenfeld and one student collaborate with personnel from KEK and INS, Tokyo, on an experiment to detect a 17 keV neutrino in the {beta}-decay spectrum of {sup 63}Ni. Members of the group also participate in Fermilab Proposal P803 which will search for the oscillation of muon neutrino to tau neutrino with sensitivity better than a factor of 40 than previously achieved and in Superconducting Super Collider activities which include the development of an imaging preradiator. A brief discussion is given on progress made for each program.

  17. Technical Progress Report for PEPCO: Turbo-Z Battery Charging System. Calendar Quarter Ending March 31, 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-01

    The project is proceeding at a rapid pace now. The software is in development for the control board and the test stand. Portions of the writing and debugging of this software have been in conjunction with the hardware development. The software now interfaces with all the measurement instruments and displays the measurements on the screen, and it saves the measurements to a disc file. There is still cleanup work to do on the display items. Work must still be imparted to the code to control a charging sequence while taking measurements of the results. The test stand hardware has received a good development effort this quarter. The timer-counter board is working in the computer. This board paces the measurement cycle and times the discharge pulse (whine circuit). The thermocouple multiplexer is scanning at the same time the analog to digital converter is taking measurements. We have made a good number of hardware modifications to solve problems revealed while writing the software. The power factor correction for the charger power section is still in development. The engineers have found additional sources for the PFC chips, and they have obtained more technical data sheets and acquired samples. The control board schematics are complete, and the software is far along in the development phase. The functions of the control board have been detailed. The control board must next be integrated with the power supply unit. The next phase of development will concentrate on integrating the components together. At this time, the final debugging of the hardware and software will begin. Additionally, the capacitive coupler development is proceeding. The annual DARPA/DoT Advanced Transportation review will be held on May 16, 1999. We expect to learn the status of our project proposal during this conference. Should we more forward, UL has agreed to help us determine the design requirements of the complete charging system at their EV testing facility, prior to manufacturing. This

  18. Technological and hygiene-sanitary aspects of using biologically pure process waste watern in the systems of technical water supply

    OpenAIRE

    Ushakov, Vasily Yakovlevich; Solodov, G. А.

    2007-01-01

    According to sanitary-toxicological factors biologically purified waste water of chemical enterprise are referred to low-toxic substances, are not allergens, do not posses irritant action on mucous tunics and skin and are suitable for recycling water system makeup. Crucial factors of reusing these waters are their corrosive activity, susceptibility to mineral salt accumulation and bioaccretion.

  19. Mass and energy budgets of animals: Behavioral and ecological implications. Annual technical progress report, April 1, 1992--March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Porter, W.P.

    1993-07-01

    The common goal of these diverse projects is to understand the mechanisms of how animal populations respond to the continual changes in their environment in both time and space. Our models are mechanistic allowing us to explore how a wide array of environmental variables may determine individual performance. Large scale climate change and its effect on animal populations can be seen as quantitative extensions of biological responses to smaller scales of environmental variability. Changes in developmental rates or reproductive levels of individuals, extension or contraction of geographic ranges, and modification of community organization have all been documented in response to previous changes in habitats. We know from our biophysical work that some changes in function are driven by microclimate conditions directly, and some are mediated indirectly through ecological parameters such as the food supply. Our research is guided by a comprehensive conceptual scheme of the interaction of an animal with its environment. The physical and physiological properties of the organism, and the range of available microclimates, set bounds on the performance of organismal function, such as growth, reproduction, storage, and behavior. To leave the most offspring over a lifetime, animals must perform those functions in a way that maximizes the amount of resources devoted to reproduction. Maximizing the total size of the budget and minimizing those budget items not devoted to reproduction are crucial. Animals trade off among expenditures for current and future reproduction. Both water and energy are important, potentially limiting resources. Projects described here include empirical studies and theoretical models.

  20. Continuous Fiber Wound Ceramic Composite (CFCC) for Commercial Water Reactor Fuel. Technical progress report for period ending April 1, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-01

    Our program began on August 1, 1999. As of April 1, 2000, the progress has been in materials selection and test planning. Three subcontracts are in place (McDermott Technologies Inc. for continuous fiber reinforced ceramic tubing fabrication, Swales Aerospace for LOCA testing of tubes, and Massachusetts Institute of Technology for In Reactor testing of tubes). With regard to materials selection we visited McDermott Technologies Inc. a number of times, including on February 23, 2000 to discuss the Draft Material Selection and Fabrication Report. The changes discussed at this meeting were implemented and the final version of this report is attached (attachment 1). McDermott Technologies Inc. will produce one type of tubing: Alumina oxide (Nextel 610) fiber, a carbon coating (left in place), and alumina-yttria matrix. A potentially desirable CFCC material of silicon carbide fiber with spinel matrix was discussed. That material selection was not adopted primarily due to material availability and cost. Gamma Engineering is exploring the available tube coatings at Northwestern University as a mechanism for reducing the permeability of the tubes, and thus, will use coating as a differentiating factor in the testing of tubing in the LOCA test as well as the In-Reactor Test. The conclusion of the Material Selection and Fabrication Report lists the possible coatings under evaluation. With regard to Test Planning, the MIT and Swales Aerospace have submitted draft Test Plans. MIT is attempting to accommodate an increased number of test specimens by evaluating alternative test configurations. Swales Aerospace held a design review at their facilities on February 24, 2000 and various engineering alternatives and safety issues were addressed. The final Test Plans are not expected until just before testing begins to allow for incorporation of changes during ''dry runs.''

  1. Heterogeneous kinetics of coal gasification. Quarterly technical progress report, 1 May 1982-31 July 1982. [Equipment design

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.

    1982-08-01

    During the reporting period significant progress was made on two fronts: (1) the steam addition system for transient steam-char kinetic experiments; and (2) the automated data acquisition system for rapid mass programming (control) of the mass spectrometer and data logging. Steam Addition System: Although it is a relatively straightforward matter to produce steam for the reactor, we found that it is quite a challenge to develop a system capable of maintaining a steady and accurately-known flow rate of steam-argon mixtures at high pressure and temperature in alternate flow circuits (i.e., the reactor and purge lines), while simultaneously protecting downstream valving and instrumentation. Thus, the scheme originally proposed has been modified to eliminate potential operating problems associated with the preliminary design. Automated Data Acquisition System: Although the CO/sub 2/ gasification data were obtained manually, the ultimate objective of the project to develop a quantitative understanding of the complete gasification rate process in the complex synthesis gas milieux calls for automated programming (control) of the mass spectrometer. In addition, the current mass spectrometer signal processing technique requires the use of a lock-in amplifier to extract the modulated portion of the total signal due to the beam species only, in an analog mode. In order to allow fast scanning of a number of species, the characteristic dwell time required by the lock-in amplifier on a particular mass peak must be decreased. These requirements are being met by implementing automated mass programming and data collection, and direct digital, phase-sensitive pulse counting.

  2. Low-rank coal research under the UND/DOE cooperative agreement. Quarterly technical progress report, July-September 1983

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.A. Jr.

    1983-01-01

    Two long gasification tests were accomplished (66 and 72 hours of slagging operation) this quarter, and the balance of the wastewater needed for the second cooling tower (CT) test (approx. 11,000 gallons) was generated. Eleven thousand gallons of slagging fixed-bed gasifier (SFBG) wastewater were solvent extracted and ammonia stripped (AS) to nominal levels of 160 mg/1 phenol and 600 mg/1 NH/sub 3/. This wastewater is being further treated by activated sludge (AS) and granular activated carbon (GAC) processing to prepare a high quality makeup for the second CT test. Phenol mass balances indicated that > 90 pct of the phenol was stripped from the tower, indicating that previous assumptions of high levels of biodegradation were erroneous. Over 80 pct of the ammonia and about 25 pct of the methanol were also stripped. Data collected during steady state operation of the bench-scale rotating biological contractor indicate complete removal of phenolics and alcohols, and 94 pct removal of BOD. Nitrification also occurred in this unit, with over 30 pct removal of ammonia. Problems due to individual bacteria, present in the biotreated wastewater, passing through the multi-media filter and thus decreasing the carbon adsorption efficiency of the GAC system, have resulted in lower treatment rates than originally anticipated. As a result, to achieve the desired treatment, the contact time of the wastewater with the carbon in the granular activated carbon system has been increased. Since this has decreased the treatment rate, a larger carbon adsorption system has been designed and is presently being constructed.

  3. Effects of Moderate and Subsequent Progressive Weight Loss on Metabolic Function and Adipose Tissue Biology in Humans with Obesity.

    Science.gov (United States)

    Magkos, Faidon; Fraterrigo, Gemma; Yoshino, Jun; Luecking, Courtney; Kirbach, Kyleigh; Kelly, Shannon C; de Las Fuentes, Lisa; He, Songbing; Okunade, Adewole L; Patterson, Bruce W; Klein, Samuel

    2016-04-12

    Although 5%-10% weight loss is routinely recommended for people with obesity, the precise effects of 5% and further weight loss on metabolic health are unclear. We conducted a randomized controlled trial that evaluated the effects of 5.1% ± 0.9% (n = 19), 10.8% ± 1.3% (n = 9), and 16.4% ± 2.1% (n = 9) weight loss and weight maintenance (n = 14) on metabolic outcomes. 5% weight loss improved adipose tissue, liver and muscle insulin sensitivity, and β cell function, without a concomitant change in systemic or subcutaneous adipose tissue markers of inflammation. Additional weight loss further improved β cell function and insulin sensitivity in muscle and caused stepwise changes in adipose tissue mass, intrahepatic triglyceride content, and adipose tissue expression of genes involved in cholesterol flux, lipid synthesis, extracellular matrix remodeling, and oxidative stress. These results demonstrate that moderate 5% weight loss improves metabolic function in multiple organs simultaneously, and progressive weight loss causes dose-dependent alterations in key adipose tissue biological pathways. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Discussion on technical security work of biological laboratory in colleges and universities%高校生物实验室技术安全工作探讨

    Institute of Scientific and Technical Information of China (English)

    王伏玲; 高华均; 黄涛

    2015-01-01

    实验室安全应纳入公共卫生安全管理范畴。安全知识和安全责任意识、环保意识缺乏,以及人为因素的失误可以通过加强安全教育来进行矫正;规范基础设施建设是保障安全的首要条件;技术标准的制定,能有力促进实验室生物安全工作的科学性和工作效能;另外,还需加强实验过程安全管理,包括实验用试剂及实验动物的规范管理等。%The university laboratory is an important place for students to study and research,and the laboratory safety should also be included in the category of public health safety management.In medical colleges and comprehensive universities,the technical security of the biological laboratory has gradually gained wide attention due to its close relationship with the health of teachers and students and the environment.The lack of safety knowledge,safety consciousness and environmental awareness,together with human errors can be corrected by strengthening safety education;the formulation of technical standards can effectively promote the scientificity and efficiency of safety work in the biological laboratory,and the standardization of infrastructure construction is a prerequisite for security;there is also a need to strengthen the safety management during the experimental process,including the standard management of experiment reagents and animals.

  5. Progress in the establishment and strengthening of national immunization technical advisory groups: analysis from the 2013 WHO/UNICEF joint reporting form, data for 2012.

    Science.gov (United States)

    Duclos, Philippe; Dumolard, Laure; Abeysinghe, Nihal; Adjagba, Alex; Janusz, Cara Bess; Mihigo, Richard; Mosina, Liudmila; Takashima, Yashohiro; Oztürk, Murat Hakan

    2013-11-04

    The majority of industrialized and some developing countries have established National Immunization Technical Advisory Groups (NITAGs). To enable systematic global monitoring of the existence and functionality of NITAGs, in 2011, WHO and UNICEF included related questions in the WHO/UNICEF Joint Reporting Form (JRF) that provides an official means to globally collect indicators of immunization program performance. These questions relate to six basic process indicators. According to the analysis of the 2013 JRF, data for 2012, notable progress was achieved between 2010 and 2012 and by the end of 2012, 99 countries (52%) reported the existence of a NITAG with a formal legislative or administrative basis (with a high of 86% in the Eastern Mediterranean Region - EMR), among the countries that reported data in the NITAG section of the JRF. There were 63 (33%) countries with a NITAG that met six process indicators (47% increase over the 43 reported in 2010) including a total of 38 developing countries. 11% of low income countries reported a NITAG that meets all six process criteria, versus 29% of middle income countries and 57% of the high income ones. Countries with smaller populations reported the existence of a NITAG that meets all six process criteria less frequently than more populated countries (23% for less populated countries versus 43% for more populated ones). However, progress needs to be accelerated to reach the Global Vaccine Action Plan (GVAP) target of ensuring all countries have support from a NITAG. The GVAP represents a major opportunity to boost the institutionalization of NITAGs. A special approach needs to be explored to allow small countries to benefit from sub-regional or other countries advisory groups. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

  6. Features of formation spirituality pictures of the world in youth in in the era of information-highlytechnological scientific and technical progress

    Directory of Open Access Journals (Sweden)

    N. V. Polishchuk

    2016-06-01

    Full Text Available In clause necessity of formation of a spiritual picture of the world, anthropocosmos at young generation at the present stage of development much crisis world and, including, the Ukrainian society is proved. In the article the necessity of formation of anthropocosmos-spiritual picture of the world at young generation at the present stage of development bagalicious the world and, in particular, of the Ukrainian society. The proposed definition of new terms: anthropocosmos is a spiritual picture of the world, anthropocosmic spirituality, anthropocosmic worldview and other anthropocentric concepts and definitions in contemporary philosophical and pedagogical discourse. The presented model of the formation of anthropocosmos-spiritual worldview of the young generation in the information and high-tech scientific and technical progress and the author’s interpretation of its philosophical, educational, pedagogical and spiritual essence. It is proved, that having generated in consciousness of the young man a anthropocosmos-spiritual picture of the world, will allow it in conditions of inevitable crash in the near future of a human civilization, if it will not solve present global-civilizational crises and will not avoid geocosmic accidents, to understand sense space-ekzoplanete lives which will be esclusivi, and, therefore, crisis-free, conflict-free, comprehensive and meaningful, anthropocosmos-highly spiritual (divine M. Berdyaev, and, therefore, progressive and virtually eternal as the life of society, which is composed of such anthropocosmos educated individuals. Solved zagalnoosvitnioi sense anthropocosmos spiritual world picture, which is to solve the problem of the choice of life strategies of mankind, the search for new ways of civilization development, in particular, resettlement anthropocosmos-conscious part of humanity for exoplanets space with the aim of preserving the gene pool of humanity and creation of human cosmically

  7. Bench-scale testing of on-line control of column flotation using a novel analyzer. Quarterly technical progress report, September 21, 1992--December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-22

    This document contains the first quarterly technical progress report for PTI`s Bench-Scale Testing Project of a circuit integrating PTI`s KEN-FLOTETM Column Flotation Technology and PTI`s On-Line Quality Monitor Control System. The twelve-month project will involve installation of a 300 lb/hr. bench-scale testing circuit at PETC`s Coal Preparation Process Research Facility (CPPRF) and testing of two bituminous coals (Upper Freeport and Pittsburgh No. 8 Seam Raw Coals). Figure 1 contains the project plan as well as the approach to completing the major tasks within the twelvemonth project. The project is broken down into three phases, which include: Phase I - Preparation: The preparation phase was performed principally at PTI`s Calumet offices from October through December, 1992. It involved building of the equipment and circuitry, as well as some preliminary design and equipment testing. Phase II - ET Circuit Installation and Testing: This installation and testing phase of the project will be performed at PETC`s CPPRF from January through May, 1993, and will be the major focus of the project. It will involve testing of the continuous 300 lb/hr. circuit. Phase II - Project Finalization: The project finalization phase will occur from June through September, 1993, at PTI`s Calumet offices and will involve finalizing analytical work and data evaluation, as well as final project reporting. This quarterly progress report principally summarizes the results from the Phase I preparation work and the plan for the early portions of the Phase 11 installation and commissioning, which will occur in January and the first week of February, 1993.

  8. Progress and Challenges in Mainstreaming Climate Change in Federal Water Resources and Environmental Planning: Data Selection, Technical Methods, Decision Paradigms, and Climate Change Communication

    Science.gov (United States)

    Ferguson, I. M.; Gangopadhyay, S.; Elsner, M. M.; Broman, D.

    2016-12-01

    The Bureau of Reclamation (Reclamation) is a federal agency tasked with developing and managing water supply and hydropower projects throughout the Western U.S. Over the past decade, Reclamation and other federal agencies have adopted new guidelines, directives, and mandates that require consideration of climate change in water resources and environmental planning and decision making. The scientific community has developed a vast number of climate projections, along with an array of models and methods to evaluate potential impacts of climate change on hydrology and water resources. However, water resources engineers, planners, and decision makers continue to face challenges regarding how best to use the available data and tools to support major water resources decisions, including decisions regarding major infrastructure investments and long-term operating criteria. These decisions may affect local communities, national agricultural and energy economies, and critical environmental resources. Examples of challenges include: How to choose between the large number of available climate projection datasets? How to consider uncertainties in future climate while constraining the number of projections or scenarios analyzed to accommodate modeling resource limitations? How to communicate climate change information and uncertainties to decision makers, stakeholders, and the public? And, How to select a decision making framework when design or operating alternatives may differ between climate change scenarios. This presentation will discuss recent progress and ongoing challenges to integrating climate change information into water resources and environmental planning. Discussion will focus on the intersection between technical challenges and decision making paradigms through the lens of this federal water management agency.

  9. Development of vanadium-phosphate catalysts for methanol production by selective oxidation of methane. Quarterly technical progress report 10, July 1, 1995--September 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, R.L.

    1995-12-07

    This document is the tenth quarterly technical progress report under Contract No. DE-AC22-92PC92110 {open_quotes}Development of Vanadium-Phosphate Catalysts for Methanol Production by Selective Oxidation of Methane{close_quotes}. Activities focused on testing of additional modified and promoted catalysts and characterization of these materials. Attempts at improving the sensitivity of our GC based analytical systems were also made with some success. Methanol oxidation studies were initiated. These results are reported. Specific accomplishments include: (1) Methane oxidation testing of a suite of catalysts promoted with most of the first row transition metals was completed. Several of these materials produced low, difficult to quantify yields of formaldehyde. (2) Characterization of these materials by XRD and FTIR was performed with the goal of correlating activity and selectivity with catalyst properties. (3) We began to characterize catalysts prepared via modified synthesis methods designed to enhance acidity using TGA measurements of acetonitrile chemisorption and methanol dehydration to dimethyl ether as a test reaction. (4) A catalyst prepared in the presence of naphthalene methanol as a structural disrupter was tested for activity in methane oxidation. It was found that this material produced low yields of formaldehyde which were difficult to quantify. (5) Preparation of catalysts with no Bronsted acid sites. This was accomplished by replacement of exchangeable protons with potassium, and (6) Methanol oxidation studies were initiated to provide an indication of catalyst activity for decomposition of this desired product and as a method of characterizing the catalyst surface.

  10. Design, construction, operation, and evaluation of a prototype culm combustion boiler/heater unit. Quarterly technical progress report, October 1-December 21, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis, Phase II - Prototype Plant Construction and Phase III - Start-Up and Operation during the period October 1, 1981 through December 31, 1981. The objectives of the program as well as the technical progress and problem areas encountered during the reporting period are presented. Seven shakedown tests were run. Start-up and shakedown testing was completed. Four parametric tests were run. Performance data are presented with the exception of boiler efficiency which will be reported once chemical analyses are completed. Total boiler operation time through the end of this quarter - 1225 h, 50 min; operating time on culm and culm/limestone - 682 h, 43 min. Inspection revealed no problems with boiler tube wear. Sulfur capture greater than 94% was demonstrated (design is 88%). A turndown of better than 4 to 1 was shown (design is 2.5 to 1). Computer control of most of the loops has been successful and manual control was also demonstrated.

  11. Development of the instrumentation and modeling for heat transfer characteristics in CFBC. Technical progress report No. 2, April 1, 1996--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seong W.

    1996-11-01

    This technical report summarizes the research conducted and progress achieved during the period of April 1, 1996 to September 30, 1996. Auxiliary subsystems tests of the circulating fluidized bed were conducted and included the characteristics of a regenerative blower, a gas distributor, and a cyclone. When the air flow rate increases, the pressure at the blower outlet is decreased. The air flow rate in the riser is a function of the pressure in the wind box. The cyclone pressure drop and gas distributor pressure drop are functions of the primary air flow rate input. The higher gas pressure drop indicates primary air in the riser column with a uniform superficial velocity. The CFB primary test was conducted using glass beads as one of the CFB bed materials. Three typical tests with different sizes of glass were conducted. The pressure sensor data acquisition system was developed for the systematic instrumentation of flow measurements in the CFB system. Two types of sensors were used, a single pressure sensor, and a differential pressure sensor, respectively. The software used to control the analog/digital board was Paragon 500. The CFB experimental studies for hydrodynamics will be continued with the improved data acquisition system.

  12. Non-intrusive measurement of particle charge: Electrostatic dry coal cleaning. Technical progress report No. 8, April 1, 1993--June 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    As we reported in the Technical Progress Report No. 7, there are surges of electric current in the charging loop during triboelectrification of all particles. A high speed data acquisition and analysis system was developed to monitor and record the current pattern. There is no known report on such charge-discharge surges in the literature. The mechanism for it is yet to be understood. The on-line computerized electric current measurement also leads to an observation of charging effects as a function of particle feeding rate. It is shown that feed rate greatly alters particle charge. Such an effect is mostly overlooked by researchers and it could have a important role in process design where the feed rate would be maximized. The initial results for coal and mineral particles demonstrated that the average charge was lower when the feed rate was increased. Further investigation is scheduled to identify potential controlling factors, eg, the solid volume fraction and particle number density could be important process factors. The study of charging velocity and particle size was continued. It was found that particle charge was linearly dependent on the charging velocity for all samples investigated. However, the slope of this linear dependence varied for particles having different diameters. In addition, the charge-velocity relationships were dependent on feeding rates. Hence, the data discussed below include these interrelationships.

  13. Eco-friendly process combining physical-chemical and biological technics for the fermented dairy products waste pretreatment and reuse.

    Science.gov (United States)

    Kasmi, Mariam; Hamdi, Moktar; Trabelsi, Ismail

    2017-01-01

    Residual fermented dairy products resulting from process defects or from expired shelf life products are considered as waste. Thus, dairies wastewater treatment plants (WWTP) suffer high input effluents polluting load. In this study, fermented residuals separation from the plant wastewater is proposed. In the aim to meet the municipal WWTP input limits, a pretreatment combining physical-chemical and biological processes was investigated to reduce residual fermented dairy products polluting effect. Yoghurt (Y) and fermented milk products (RL) were considered. Raw samples chemical oxygen demand (COD) values were assessed at 152 and 246 g.L(-1) for Y and RL products, respectively. Following the thermal coagulation, maximum removal rates were recorded at 80 °C. Resulting whey stabilization contributed to the removal rates enhance to reach 72% and 87% for Y and RL samples; respectively. Residual whey sugar content was fermented using Candida strains. Bacterial growth and strains degrading potential were discussed. C. krusei strain achieved the most important removal rates of 78% and 85% with Y and RL medium, respectively. Global COD removal rates exceeded 93%.

  14. IRIS Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    M. D. Carelli

    2003-11-03

    OAK-B135 This NERI project, originally started as the Secure Transportable Autonomous Light Water Reactor (STAR-LW) and currently known as the International Reactor Innovative and Secure (IRIS) project, had the objective of investigating a novel type of water-cooled reactor to satisfy the Generation IV goals: fuel cycle sustainability, enhanced reliability and safety, and improved economics. The research objectives over the three-year (1999-2002) program were as follows: First year: Assess various design alternatives and establish main characteristics of a point design; Second year: Perform feasibility and engineering assessment of the selected design solutions; Third year: Complete reactor design and performance evaluation, including cost assessment These objectives were fully attained and actually they served to launch IRIS as a full fledged project for eventual commercial deployment. The program did not terminate in 2002 at the end of the NERI program, and has just entered in its fifth year. This has been made possible by the IRIS project participants which have grown from the original four member, two-countries team to the current twenty members, nine countries consortium. All the consortium members work under their own funding and it is estimated that the value of their in-kind contributions over the life of the project has been of the order of $30M. Currently, approximately 100 people worldwide are involved in the project. A very important constituency of the IRIS project is the academia: 7 universities from four countries are members of the consortium and five more US universities are associated via parallel NERI programs. To date, 97 students have worked or are working on IRIS; 59 IRIS-related graduate theses have been prepared or are in preparation, and 41 of these students have already graduated with M.S. (33) or Ph.D. (8) degrees. This ''final'' report (final only as far as the NERI program is concerned) summarizes the work performed in the first four years of IRIS, from October 1999 to October 2003. It provides a panoramic of the project status and design effort, with emphasis on the current status, since two previous reports have very extensively documented the work performed, from inception to early 2002.

  15. The effect of rigid and non-rigid connections between implants and teeth on biological and technical complications: a systematic review and a meta-analysis.

    Science.gov (United States)

    Tsaousoglou, Phoebus; Michalakis, Konstantinos; Kang, Kiho; Weber, Hans-Peter; Sculean, Anton

    2017-07-01

    To assess survival, as well as technical and biological complication rates of partial fixed dental prostheses (FDPs) supported by implants and teeth. An electronic Medline search was conducted to identify articles, published in dental journals from January 1980 to August 2015, reporting on partial FDPs supported by implants and teeth. The search terms were categorized into four groups comprising the PICO question. Manual searches of published full-text articles and related reviews were also performed. The initial database search produced 3587 relevant titles. Three hundred and eighty-six articles were retrieved for abstract review, while 39 articles were selected for full-text review. A total of 10 studies were selected for inclusion. Overall survival rate for implants ranged between 90% and 100%, after follow-up periods with a mean range of 18-120 months. The survival of the abutment teeth was 94.1-100%, while the prostheses survival was 85-100% for the same time period. The most frequent complications were "periapical lesions" (11.53%). The most frequent technical complication was "porcelain occlusal fracture" (16.6%), followed by "screw loosening" (15%). According to the meta-analysis, no intrusion was noted on the rigid connection group, while five teeth (8.19%) were intruded in the non-rigid connection group [95% CI (0.013-0.151)]. The tooth-implant FDP seems to be a possible alternative to an implant-supported FDP. There is limited evidence that rigid connection between teeth and implants presents better results when compared with the non-rigid one. The major drawback of non-rigidly connected FDPs is tooth intrusion. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. Variations in the Biological Functions of HIV-1 Clade C Envelope in a SHIV-Infected Rhesus Macaque during Disease Progression.

    Directory of Open Access Journals (Sweden)

    For Yue Tso

    Full Text Available A better understanding of how the biological functions of the HIV-1 envelope (Env changes during disease progression may aid the design of an efficacious anti-HIV-1 vaccine. Although studies from patient had provided some insights on this issue, the differences in the study cohorts and methodology had make it difficult to reach a consensus of the variations in the HIV-1 Env functions during disease progression. To this end, an animal model that can be infected under controlled environment and reflect the disease course of HIV-1 infection in human will be beneficial. Such an animal model was previously demonstrated by the infection of macaque with SHIV, expressing HIV-1 clade C Env V1-V5 region. By using this model, we examined the changes in biological functions of Env in the infected animal over the entire disease course. Our data showed an increase in the neutralization resistance phenotype over time and coincided with the decrease in the net charges of the V1-V5 region. Infection of PBMC with provirus expressing various Env clones, isolated from the infected animal over time, showed a surprisingly better replicative fitness for viruses expressing the Env from early time point. Biotinylation and ELISA data also indicated a decrease of cell-surface-associated Env and virion-associated gp120 content with disease progression. This decrease did not affect the CD4-binding capability of Env, but were positively correlated with the decrease of Env fusion ability. Interestingly, some of these changes in biological functions reverted to the pre-AIDS level during advance AIDS. These data suggested a dynamic relationship between the Env V1-V5 region with the host immune pressure. The observed changes of biological functions in this setting might reflect and predict those occurring during natural disease progression in human.

  17. The economical production of alcohol fuels from coal-derived synthesis gas. Quarterly technical progress report No. 5, October 1, 1992--December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    Two base case flow sheets have now been prepared. In the first, which was originally presented in TPR4, a Texaco gasifier is used. Natural gas is also burned in sufficient quantity to increase the hydrogen to carbon monoxide ratio of the synthesis gas to the required value of 1. 1 for alcohol synthesis. Acid gas clean up and sulfur removal are accomplished using the Rectisol process followed by the Claus and Beavon processes. About 10% of the synthesis gas is sent to a power generation unit in order to produce electric power, with the remaining 90% used for alcohol synthesis. For this process, the estimated installed cost is $474.2 mm. The estimated annual operating costs are $64.5 MM. At a price of alcohol fuels in the vicinity of $1. 00/gal, the pay back period for construction of this plant is about four years. The details of this case, called Base Case 1, are presented in Appendix 1. The second base case, called Base Case 2, also has a detailed description and explanation in Appendix 1. In Base Case 2, a Lurgi Gasifier is used. The motivation for using a Lurgi Gasifier is that it runs at a lower temperature and pressure and, therefore, produces by-products such as coal liquids which can be sold. Based upon the economics of joint production, discussed in Technical Progress Report 4, this is a necessity. Since synthesis gas from natural gas is always less expensive to produce than from coal, then alcohol fuels will always be less expensive to produce from natural gas than from coal. Therefore, the only way to make coal- derived alcohol fuels economically competitive is to decrease the cost of production of coal-derived synthesis gas. one method for accomplishing this is to sell the by-products from the gasification step. The details of this strategy are discussed in Appendix 3.

  18. 技术进步对就业人力资本结构的影响%The Impact of Technical Progress on Human Capital Structure of Employment

    Institute of Scientific and Technical Information of China (English)

    黄犚

    2012-01-01

    利用2003-2010年省际面板数据,研究不同类型的技术进步对我国就业人力资本结构的影响.结果表明:总就业与就业结构的调整是矛盾的统一体;自主创新的技术进步对总就业的创造作用大于摧毁作用;外商直接投资和进出口贸易产生的引进技术进步有利于促进我国对外经济体转型升级,增加高人力资本需求;我国对外直接投资作为贸易的补充有利于增加我国总就业,但由于技术获取动力不足,吸收技术溢出的效果不明显,不具有高人力资本偏态效应.同时,该影响也表现出一定程度的区域差异.%Using the provincial panel data from 2003 to 2010, this paper studies the influence of different types of technical progress of the human capital structure of employment in China. The result shows that: total employment and employment structure adjustment are the unity of contradiction; independent innovation benefits job creation; FDI and foreign trade promote the transformation and upgrading of Chinas foreign economy, and thus increase the demand of high human capital; China's technology sourcing OFDI is underpowered; as a supplement to trade, it will be beneficial to increase total employment; but the technology spillover effect is not obvious. Meanwhile, the effect is different in areas.

  19. Thin films of gallium arsenide on low-cost substrates. Quarterly technical progress report No. 8 and topical report No. 3, April 2-July 1, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, R.P.; Dapkus, P.D.; Dupuis, R.D.; Johnson, R.E.; Manasevit, H.M.; Moudy, L.A.; Yang, J.J.; Yingling, R.D.

    1978-07-01

    The seventh quarter of work on the contract is summarized. The metalorganic chemical vapor deposition (MO-CVD) technique has been applied to the growth of thin films of GaAs and GaAlAs on inexpensive polycrystalline or amorphous substrate materials (primarily glasses and metals) for use in fabrication of large-area low-cost photovoltaic device structures. Trimethylgallium (TMG), arsine (AsH/sub 3/), and trimethylaluminum (TMAl) are mixed in appropriate concentrations at room temperature in the gaseous state and pyrolyzed at the substrate, which is heated in a vertical reactor chamber to temperatures of 725 to 750/sup 0/C, to produce the desired film composition and properties. The technical activities during the quarter were concentrated on (1) a continuing evaluation of various graphite materials as possible substrates for MO-CVD growith of the polycrystalline GaAs solar cells; (2) attempts to improve the quality (especially the grain size) of polycrystalline GaAs films on Mo sheet and Mo/glass substrates by using HCl vapor during the MO-CVD growith process; (3) further studies of the transport properties of polycrystalline GaAs films, wth emphasis on n-type films; (4) continuing investigations of the properties of p-n junctions in polycrystalline GaAs, with emphasis on the formation and properties of p/sup +//n/n/sup +/ deposited structures; and (5) assembling apparatus and establishing a suitable technique for producing TiO/sub 2/ layers for use as AR coatings on GaAs cells. Progress is reported. (WHK)

  20. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  1. Technical and biological evaluation of Galician carp young-of-the-year in the conditions of industrial rearing in the ponds of Subcarpathia

    Directory of Open Access Journals (Sweden)

    I. Hrytsyniak

    2017-03-01

    Full Text Available Purpose To analyze technical and biological parameters of Galician carp young-of-the-year in the conditions of their commercial rearing in Subcarpathia ponds. Methodology. The works have been performed in accordance with conventional techniques in fish farming and selective breeding. During the rearing of Galician carp yearlings, a monitoring of abiotic factors in the experimental pond has been carried out. Findings. According to hydrochemical analysis, pond water belonged to hydrocarbonate class of calcium water and a type, which is typical for natural waters of this physical-geographic area. The species composition of phytoplankton at the beginning of the study was represented by 39 species and intraspecific taxa, in the middle of the experiment — 33, and 36 species and intraspecific taxa at the end of the study period. The majority of phytoplankton species composition was represented by green algae. The majority of zooplankton biomass (up 46% was represented by copepods, while rotifers dominated by abundance (up 49.9%. The parameters of zoobenthos development in the rearing pond ranged within 54 - 120 ind. / m2 by abundance and 0.5 - 1.3 g / m2 by biomass. The most abundant zoobenthic organisms were Chironomidae (71% and Oligochaeta (29%. Fish stocking density in the rearing pond of the 1st order was 10 thousand fish/ha; fish seeds were represented by Galician carp larvae. At the end of the growing season, 27.2 thousand young-of-the-year were obtained, the survival rate was 68%. Mean individual weight was 96 ± 75 g, coefficient of variation was 12%. When assessing the dynamics of weight growth, its peak was observed in the first week of August, while the specific growth rate had maximum values in the third week of July. Exterior parameters were used to evaluate strain characteristics. In the middle of the growing season, the young-of-the-year had mean condition factor of 2.6 ± 0.3, which was high enough for them. Before wintering, this

  2. The Biological Habitus and Cultivated Technical Points of Bougainvilleas%簕杜鹃的生物学特性和种植技术要点

    Institute of Scientific and Technical Information of China (English)

    陈涛

    2011-01-01

    筋杜鹃也称叶子花,原产南美洲,其栽培品种在世界热带亚热带地区广泛种植,其花总苞片色彩丰富,开花时景色艳丽壮观,被选为深圳等多个城市的市花。文章介绍了筋杜鹃在原产地的生物学特性,扼要总结了筋杜鹃盛花种植技术要点,推荐了若干适宜栽种的品种,并提出了培育或选育耐水喜湿和耐寒多花筋杜鹃品种的必要性。%Bougainvillea is natitive to South America with its cultivars widely cultivated in tropical and subtropical regions in the world. Bouaginvillea has been selected as the official flower for Shenzben and other cities, as the colourful and aboundant involucres tremendously add spectacular scenery to the urban landscape. In this paper the biological habitus were introduced, the cultivated technical points were summarized and the suitable cuhivars were recommended so as to achieve full blooming of Bougainvillea in cultivation. In addition to select or breed new cuhivars with water-resistant and hygrophilous propensities.

  3. Radiation physics, biophysics and radiation biology. Progress report for October 1, 1979-September 30, 1980. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, H.H.; Hall, E.J.

    1980-07-01

    Separate abstracts were prepared for 31 of the 32 papers presented in this progress report. The other paper is represented by an abstract only and deals with field shaping and recalibration of x-ray facilities.

  4. 合成生物学的研究进展与应用%The Research Progress and Future Application of Synthetic Biology

    Institute of Scientific and Technical Information of China (English)

    朱星华; 李哲

    2011-01-01

    This paper introduces the concept of the synthetic biology, recent progress and potential applications. Based on the technology and the economics characteristics of the synthetic biology, the author puts forward three proposals: Strengthening basic research in synthetic biology vigorously and establishing national research base of synthetic biology; Focusing on the strategic development of new industries in synthetic biology of China; Establishing the necessary rules and regulations in the biosecurity,ethics, intellectual property and so on.%本文详细介绍了合成生物学的概念、最新研究进展及其广阔的应用前景.针对合成生物学的技术与经济特性,提出三点建议:大力加强合成生物学的基础研究,建立国家级的合成生物学研究基地;我国合成生物学技术的发展应着眼于战略性新兴产业发展的思维;在生物安全、伦理、知识产权等方面建立必要的法规和制度.

  5. Humic substances in performance assessment of nuclear waste disposal: Actinide and iodine migration in the far-field. Third technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Buckau, G.

    2005-04-01

    The present report describes progress within the third and final year of the EC-project 'Humic Substances in Performance Assessment of Nuclear Waste Disposal: Actinide and Iodine Migration in the Far-Field'. The work conducted within the present project builds on a number of previous activities/project supported by the Commission. It finds its continuation within different EC FP 6 instruments and also provides for additional continued cooperation through network structures resulting from the broad cooperation within the project. Without being a formal requirement of the Commission or co-funding bodies, this report documents results in great technical detail and makes the results available to a broad scientific community. The report contains an executive summary written by the coordinator. More detailed results are given as individual contributions in the form of 12 annexes. Not all results are discussed or referred to in the executive summary report and thus readers with a deeper interest also need to consult the annexes. The overall objectives were to generate knowledge about the impact of humic substances on the migration of actinides and iodine in the far-field of a nuclear waste repository. In the beginning, focus was rather on the potential enhancement due to humic colloid mediated radionuclide transport. Thereby, sources, inventory, stability and mobility of dissolved humic substances in their colloidal form formed a key topic. Other key topics were the interaction with actinides and iodine, transport studies under near-natural conditions in the laboratory, rationalization of knowledge in models and application to three migration cases for visualization of the overall outcome. Changes relative to the original objectives were given by moving emphasis of natural chemical analogue studies from the question of kinetic exchange constants for different inventories in natural and laboratory systems to the study of anthropogenic actinide contaminants in the

  6. STUDY OF TENASCIN-C (TN-C PROTEIN ROLE IN ORAL MALIGNANCY PROGRESSIVITY PROCESS BY MOLECULAR BIOLOGICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Into Suhardjo

    2006-04-01

    Full Text Available The progressiveness of malignant tumors influenced by various complex factors. One of the important factors is Tenascin-C (Tn-C protein, which can interact with fibrinectin as an anti adhesive or anti modulation protein. Tenascin-C is an extra cellular matrix glycoprotein (EMG, which can be found in the oral tissue also as an up regulator. They can be associated with EMG, and strongly influenced promotion of the stromal cell as cell growth, migration, differentiation, angiogenesis, and apoptosis in cancer. Alternative splicing of fibronectin-like type III (FN III repeats of Tn-C generates a number of splice variants, and influences tumor progressiveness. The conclusion of Tn-C role in tumor progressiveness depends on the molecular weight and alternative splicing of FN III.

  7. Synthesis and biological incorporation of icons into macromolecules for NMR study. Progress report, June 1, 1976--May 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Grant, D.M.

    1977-02-01

    Progress is reported on methods to synthesize novel /sup 13/C-labeled materials for incorporation into macromolecules. Gram quantities (9 grams) of labeled uracil have been synthesized and incorporated, by means of a mutant bacterial strain into t-RNA. The bulk t-RNA has been isolated, purified, and carbon-13 T/sub 1/ studies completed. Work now in progress is directed towards the production of greater quantities of t-RNA from E. coli instead of Salmonella and the ultimate isolation of individual t-RNA molecules.

  8. Research Progress of Molecular Biology of Amylases from Lactic Acid Bacteria%乳酸细菌淀粉酶分子生物学研究进展

    Institute of Scientific and Technical Information of China (English)

    林谦

    2013-01-01

    The research progress of amylases from lactic acid bacteria, including microbial sources, molecular biology and applications was reviewed. Besides, their prospects were also discussed in this paper.%综述了乳酸细菌淀粉酶的研究概况,包括微生物来源、分子生物学研究与应用三个方面,并对其研究前景进行了展望,以期对学界的研究结果有所补充和发展。

  9. Multiple sclerosis: integration of modeling with biology, clinical and imaging measures to provide better monitoring of disease progression and prediction of outcome.

    Science.gov (United States)

    Goodwin, Shikha Jain

    2016-12-01

    Multiple Sclerosis (MS) is a major cause of neurological disability in adults and has an annual cost of approximately $28 billion in the United States. MS is a very complex disorder as demyelination can happen in a variety of locations throughout the brain; therefore, this disease is never the same in two patients making it very hard to predict disease progression. A modeling approach which combines clinical, biological and imaging measures to help treat and fight this disorder is needed. In this paper, I will outline MS as a very heterogeneous disorder, review some potential solutions from the literature, demonstrate the need for a biomarker and will discuss how computational modeling combined with biological, clinical and imaging data can help link disparate observations and decipher complex mechanisms whose solutions are not amenable to simple reductionism.

  10. Informing a Learning Progression in Genetics: Which Should Be Taught First, Mendelian Inheritance or the Central Dogma of Molecular Biology?

    Science.gov (United States)

    Duncan, Ravit Golan; Castro-Faix, Moraima; Choi, Jinnie

    2016-01-01

    The Framework for Science Education and the Next Generation Science Standards in the USA emphasize learning progressions (LPs) that support conceptual coherence and the gradual building of knowledge over time. In the domain of genetics there are two independently developed alternative LPs. In essence, the difference between the two progressions…

  11. Informing a Learning Progression in Genetics: Which Should Be Taught First, Mendelian Inheritance or the Central Dogma of Molecular Biology?

    Science.gov (United States)

    Duncan, Ravit Golan; Castro-Faix, Moraima; Choi, Jinnie

    2016-01-01

    The Framework for Science Education and the Next Generation Science Standards in the USA emphasize learning progressions (LPs) that support conceptual coherence and the gradual building of knowledge over time. In the domain of genetics there are two independently developed alternative LPs. In essence, the difference between the two progressions…

  12. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  13. The Technical and Biological Reproducibility of Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry (MALDI-TOF MS) Based Typing: Employment of Bioinformatics in a Multicenter Study

    Science.gov (United States)

    Oberle, Michael; Wohlwend, Nadia; Jonas, Daniel; Maurer, Florian P.; Jost, Geraldine; Tschudin-Sutter, Sarah; Vranckx, Katleen; Egli, Adrian

    2016-01-01

    Background The technical, biological, and inter-center reproducibility of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI TOF MS) typing data has not yet been explored. The aim of this study is to compare typing data from multiple centers employing bioinformatics using bacterial strains from two past outbreaks and non-related strains. Material/Methods Participants received twelve extended spectrum betalactamase-producing E. coli isolates and followed the same standard operating procedure (SOP) including a full-protein extraction protocol. All laboratories provided visually read spectra via flexAnalysis (Bruker, Germany). Raw data from each laboratory allowed calculating the technical and biological reproducibility between centers using BioNumerics (Applied Maths NV, Belgium). Results Technical and biological reproducibility ranged between 96.8–99.4% and 47.6–94.4%, respectively. The inter-center reproducibility showed a comparable clustering among identical isolates. Principal component analysis indicated a higher tendency to cluster within the same center. Therefore, we used a discriminant analysis, which completely separated the clusters. Next, we defined a reference center and performed a statistical analysis to identify specific peaks to identify the outbreak clusters. Finally, we used a classifier algorithm and a linear support vector machine on the determined peaks as classifier. A validation showed that within the set of the reference center, the identification of the cluster was 100% correct with a large contrast between the score with the correct cluster and the next best scoring cluster. Conclusions Based on the sufficient technical and biological reproducibility of MALDI-TOF MS based spectra, detection of specific clusters is possible from spectra obtained from different centers. However, we believe that a shared SOP and a bioinformatics approach are required to make the analysis robust and reliable. PMID:27798637

  14. Progress in Computational Physics (PiCP) Vol 2 Coupled Fluid Flow in Energy, Biology and Environmental Research

    CERN Document Server

    Ehrhardt, Matthias

    2012-01-01

    This second volume contains both, the mathematical analysis of the coupling between fluid flow and porous media flow and state-of-the art numerical techniques, like tailor-made finite element and finite volume methods. Readers will come across articles devoted to concrete applications of these models in the field of energy, biology and environmental research.

  15. Smad4 is dispensable for normal pancreas development yet critical in progression and tumor biology of pancreas cancer.

    Science.gov (United States)

    Bardeesy, Nabeel; Cheng, Kuang-Hung; Berger, Justin H; Chu, Gerald C; Pahler, Jessica; Olson, Peter; Hezel, Aram F; Horner, James; Lauwers, Gregory Y; Hanahan, Douglas; DePinho, Ronald A

    2006-11-15

    SMAD4 is inactivated in the majority of pancreatic ductal adenocarcinomas (PDAC) with concurrent mutational inactivation of the INK4A/ARF tumor suppressor locus and activation of the KRAS oncogene. Here, using genetically engineered mice, we determined the impact of SMAD4 deficiency on the development of the pancreas and on the initiation and/or progression of PDAC-alone or in combination with PDAC--relevant mutations. Selective SMAD4 deletion in the pancreatic epithelium had no discernable impact on pancreatic development or physiology. However, when combined with the activated KRAS(G12D) allele, SMAD4 deficiency enabled rapid progression of KRAS(G12D)-initiated neoplasms. While KRAS(G12D) alone elicited premalignant pancreatic intraepithelial neoplasia (PanIN) that progressed slowly to carcinoma, the combination of KRAS(G12D) and SMAD4 deficiency resulted in the rapid development of tumors resembling intraductal papillary mucinous neoplasia (IPMN), a precursor to PDAC in humans. SMAD4 deficiency also accelerated PDAC development of KRAS(G12D) INK4A/ARF heterozygous mice and altered the tumor phenotype; while tumors with intact SMAD4 frequently exhibited epithelial-to-mesenchymal transition (EMT), PDAC null for SMAD4 retained a differentiated histopathology with increased expression of epithelial markers. SMAD4 status in PDAC cell lines was associated with differential responses to transforming growth factor-beta (TGF-beta) in vitro with a subset of SMAD4 wild-type lines showing prominent TGF-beta-induced proliferation and migration. These results provide genetic confirmation that SMAD4 is a PDAC tumor suppressor, functioning to block the progression of KRAS(G12D)-initiated neoplasms, whereas in a subset of advanced tumors, intact SMAD4 facilitates EMT and TGF-beta-dependent growth.

  16. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  17. Materials compatibility and lubricants research on CFC-refrigerant substitutes. Quarterly MCLR program technical progress report, January 1, 1995--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Szymurski, S.R.; Hourahan, G.C.; Godwin, D.S.

    1995-04-01

    The Materials Compatibility and Lubricants Research (MCLR) program supports critical research to accelerate the introduction of CFC and HCFC refrigerant substitutes. The MCLR program addresses refrigerant and lubricant properties and materials compatibility. The primary elements of the work include data collection and dissemination, materials compatibility testing, and methods development. The work is guided by an Advisory Committee consisting of technical experts from the refrigeration and air-conditioning industry and government agencies. The Air-Conditioning and Refrigeration Technology Institute, Inc., (ARTI) manages and contracts multiple research projects and a data collection and dissemination effort. Detailed results from these projects are reported in technical reports prepared by each subcontractor.

  18. 生物法处理含油污泥的研究进展%Research Progress in Treatment of Oily Sludge by Biological Method

    Institute of Scientific and Technical Information of China (English)

    商雪娇; 李思; 张金辉

    2014-01-01

    With the development of petrol industry, oily sludge yield increases quickly. Oily sludge with complex components and serious emulsification is difficult to treat. Biological treatment of oily sludge has received extensive attention of scholars because it has low cost and no secondary pollution. In this paper, research progress of several biological treatment methods were reviewed, including composting method, combined biological method, bioreactor method, bioremediation method and biological flotation method. Finally, some suggestions about the future development of the biological methods were put forward.%随着石油产业的不断发展,导致含油污泥产量越来越大。含油污泥成分复杂,乳化严重,难于处理,直接排放对环境危害极大。生物法处理含油污泥具有成本低、无二次污染等优点,因此受到国内外学者的广泛关注。主要介绍了几种含油污泥的生物处理方法,包括:生物堆肥法、联合生物法、生物反应器法、生物修复法和生物浮选法,并对生物法处理含油污泥未来的发展提出了一些建议,以期为相关研究提供参考。

  19. A two decade contribution of molecular cell biology to the centennial of Alzheimer's disease: are we progressing toward therapy?

    Science.gov (United States)

    Dillen, Katleen; Annaert, Wim

    2006-01-01

    Alzheimer's disease (AD), described for the first time 100 years ago, is a neurodegenerative disease characterized by two neuropathological hallmarks: neurofibrillary tangles containing hyperphosphorylated tau and senile plaques. These lesions are likely initiated by an imbalance between production and clearance of amyloid beta, leading to increased oligomerization of these peptides, formation of amyloid plaques in the brain of the patient, and final dementia. Amyloid beta is generated from amyloid precursor protein (APP) by subsequent beta- and gamma-secretase cleavage, the latter being a multiprotein complex consisting of presenilin-1 or -2, nicastrin, APH-1, and PEN-2. Alternatively, APP can be cleaved by alpha- and gamma-secretase, precluding the production of Abeta. In this review, we discuss the major breakthroughs during the past two decades of molecular cell biology and the current genetic and cell biological state of the art on APP proteolysis, including structure-function relationships and subcellular localization. Finally, potential directions for cell biological research toward the development of AD therapies are briefly discussed.

  20. Increased oil production and reserves utilizing secondary/tertiary recovery techniques on small reservoirs in the Paradox Basin, Utah. Technical progress report, January 1--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Allison, M.L.

    1996-04-30

    The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-(CO{sub 2}-)flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meetings, and publication in newsletters and various technical or trade journals.

  1. Increased oil production and reserves utilizing secondary/tertiary recovery techniques on small reservoirs in the Paradox basin, Utah. Final technical progress report, October 1--December 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Allison, M.L.

    1996-01-15

    The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-(CO{sub 2}) flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meeting, and publication in newsletters and various technical or trade journals. Five activities continued this quarter as part of the geological and reservoir characterization of carbonate mound buildups in the Paradox basin: (1) regional facies evaluation, (2) evaluation of outcrop analogues, (3) field-scale geologic analysis, (4) reservoir analysis, and (5) technology transfer.

  2. Federal Assistance Program Quarterly Project Progress Report. Geothermal Energy Program: Information Dissemination, Public Outreach, and Technical Analysis Activities. Reporting Period: January 1 - March 31, 2001 [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lund, John W.

    2002-03-22

    The final report of the accomplishments of the geothermal energy program: information dissemination, public outreach and technical analysis activities by the project team consisting of the Geo-Heat Center, Geothermal Resources Council, Geothermal Education Office, Geothermal Energy Association and the Washington State University Energy Program.

  3. Research Progress in the Biological Method for Treating Industrial Wastewater%生物法处理工业废水的研究进展

    Institute of Scientific and Technical Information of China (English)

    吕伯宇; 李思凡; 商丽艳

    2014-01-01

    工业废水产量大,难治理,生物法处理工业废水具有处理效果稳定、应用范围广、运行成本低、处理的水量大等优点。介绍了生物法处理含硫废水、造纸废水、造革废水、有机废水及印染废水的研究进展,并对今后的发展方向提出建议。%Industrial wastewater has large discharge amount, and is difficult to be treated. Using biological method to treat industrial wastewater has the advantages of stabilized treatment effect, wide application range, low operation cost, large treatment capacity. In this paper, research progress in the biological method for treating sulfur-containing wastewater, papermaking wastewater, tannery wastewater, organic wastewater and printing and dyeing wastewater were introduced. And some suggestions on the development of the biological method in the future were put forward.

  4. The development of coal-based technologies for Department of Defense facilities. Volume 2, Appendices. Semiannual technical progress report, September 28, 1994--March 27, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Bartley, D.A.; Hatcher, P. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1996-10-15

    This semiannual progress report contains the following appendices: description of the 1,000 lb steam/h watertube research boiler; the Pennsylvania CGE model; Phase II, subtask 3.9 coal market analysis; the CGE model; and sector definition.

  5. Development of automated welding process for field fabrication of thick walled pressure vessels. Fourth quarter technical progress report for period ending September 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Progress in developing an automated welding process for the field fabrication of thick walled pressure vessels is reported. Plans for the demonstration facility, for nondestructive testing, and for the procurement of materials are discussed. (LCL)

  6. Research Results Ultra-fast Energy Transfer from Monomer to Dimer within a Trimeric Molecule New Progress in Heterogeneous Catalysis Research Key Progress in Research on Terrestrial Carbon Cycle in China A New Progress in Research on the Mechanism of Bio-Invasion New Findings in Anti-viral infection and Control of Inflammation Major Headway in Avian Origin Research New Progress in Gold-Nanoparticle-Based Biochips Topological Insulator Research Made Important Progress Major Progress in Biodiversity Achieved New Developments of Direct Methods in Protein Crystallography Major Progress in China-UK Collaboration on the Causal Relationship between Volcanic Activity and Biological Distinction News in Brief: NSFC set up "Research Fund for Young Foreign Scholars" How Often Does Human DNA Mutate? Research Progress on Colossal Anisotropic Magneto Resistive Effect

    Science.gov (United States)

    2009-01-01

    Ultra-fast Energy Transfer from Monomer to Dimer within a Trimeric Molecule New Progress in Heterogeneous Catalysis Research Key Progress in Research on Terrestrial Carbon Cycle in China A New Progress in Research on the Mechanism of Bio-Invasion New Findings in Anti-viral infection and Control of Inflammation Major Headway in Avian Origin Research New Progress in Gold-Nanoparticle-Based Biochips Topological Insulator Research Made Important Progress Major Progress in Biodiversity Achieved New Developments of Direct Methods in Protein Crystallography Major Progress in China-UK Collaboration on the Causal Relationship between Volcanic Activity and Biological Distinction News in Brief: NSFC set up "Research Fund for Young Foreign Scholars" How Often Does Human DNA Mutate? Research Progress on Colossal Anisotropic Magneto Resistive Effect

  7. 生物钟基因研究进展%Progress in the Studies of Biological Clocks Genes

    Institute of Scientific and Technical Information of China (English)

    徐军; 童建

    2001-01-01

    Circadian rhythms describe biological phenomena that oscillate with an 24 hour cycle. These rhythms include blood pressure, body temperature, hormone level, the number of immune cells in blood, and the sleep-wake cycle. The aim is to introduce common genes between species that are responsible for determining the circadian behavior, especially some transcription factor s that serve to regulate many circadian rhythm genes. And the common molecular mechanism of biological clocks between fly and human will be in troduced.%昼夜节律是以大约24 h为周期波动的生物现象.这些节律包括血压、体温 、激素水平、血中免疫细胞的数量、睡眠觉醒周期循环等.基因水平上的昼夜节律研究还只 是刚起步,介绍不同物种控制昼夜行为的共同基因(如period 、timless 、clock基因 等)的研究进展,特别是一些有关调控昼夜节律基因的转录因子的研究.同时讨论果蝇和人 类生物钟调节的共同分子机制.

  8. Evaluation of Novel Targeted Therapies in Aggressive Biology Sarcoma Patients after progression from US FDA approved Therapies

    Science.gov (United States)

    Subbiah, Vivek; Hess, Kenneth R.; Khawaja, Muhammad Rizwan; Wagner, Michael J.; Tang, Chad; Naing, Aung; Fu, Siqing; Janku, Filip; Piha-Paul, Sarina; Tsimberidou, Apostolia M.; Herzog, Cynthia E.; Ludwig, Joseph A.; Patel, Shreyaskumar; Ravi, Vinod; Benjamin, Robert S.; Meric-Bernstam, Funda; Hong, David S.

    2016-01-01

    Prognosis of patients with advanced sarcoma after progression from FDA approved therapies remains grim. In this study, clinical outcomes of 100 patients with advanced sarcoma who received treatment on novel targeted therapy trials were evaluated. Outcomes of interest included best response, clinical benefit rate, progression-free survival (PFS) and overall survival (OS). Median patient age was 48 years (range 14–80). Patients had received a median of 2 prior lines of systemic treatment. Phase I treatments were anti-VEGF–based (n = 45), mTOR inhibitor–based (n = 15), and anti-VEGF + mTOR inhibitor–based (n = 17) or involved other targets (n = 23). Best responses included partial response (n = 4) and stable disease (n = 57). Clinical benefit rate was 36% (95% confidence interval 27–46%). Median OS was 9.6 months (95% Confidence Interval 8.1–14.2); median PFS was 3.5 months (95% Confidence Interval 2.4–4.7). RMH prognostic score of 2 or 3 was associated with lower median OS (log-rank p-value < 0.0001) and PFS (log-rank p-value 0.0081). Receiving cytotoxic chemotherapy as part of phase I trial was also associated with shorter median OS (log-rank p-value 0.039). Patients with advanced sarcoma treated on phase I clinical trials had a clinical benefit rate of 36% and RMH score predicted survival. PMID:27748430

  9. Materials Compatibility and Lubricants Research of CFC-refrigerant substitutes. Quarterly technical progress report, 1 April 1993--30 June 1993

    Energy Technology Data Exchange (ETDEWEB)

    Godwin, D.S.; Hourahan, G.C.; Szymurski, S.R.

    1993-07-01

    The Materials Compatibility and Lubricants Research (MCLR) program supports critical research to accelerate the introduction of CFC and HCFC refrigerant substitutes. The DCLR program addresses refrigerant and lubricant properties and materials compatibility. The primary elements of the work include data collection and dissemination, materials compatibility testing, and methods development. The work is guided by an Advisory Committee consisting of technical experts from the refrigeration and air-conditioning industry and government agencies. Under the current MCLR program the Air-Conditioning and Refrigeration Technology Institute, Inc., (ARTI) is contracting and managing multiple research projects and a data collection and dissemination effort. Detailed results from these projects are reported in technical reports prepared by each researcher.

  10. Identification and validation of heavy metal and radionuclide hyperaccumulating terrestrial plant species. Quarterly technical progress report, March 20, 1995--June 20, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Kochian, L.

    1995-12-01

    The biological accumulation of heavy metals and cesium, strontium, and uranium in plants is discussed. The role of nutrient deficiencies and foliar treatments of manganese and iron compounds is described.

  11. An Empirical Analysis on Internal and External Effects of Technical Progress in Equipment Manufacturing Industry%装备制造业技术进步内外部效应的实证分析

    Institute of Scientific and Technical Information of China (English)

    刘震; 张宏

    2016-01-01

    In the realistic context of“Made in China by 2025”and“Industrial 4.0”,this paper,based on the analysis of the do⁃mestic and international effect mechanism of technical progress in equipment manufacturing industry,empirically verifies the internal and external effects of technical progress in China’s equipment manufacturing industry with the aid of the panel and the VAR model. The study finds that:In the internal effect,the equipment manufacturing industry’s income and energy effi⁃ciency have a two-way positive impact on technical level,profit has a one-way positive impact on technical level,and employ⁃ment and technology level show a two-way negative impact;In the external effect,the equipment manufacturing industry’s FDI quality and technical level present a two-way positive impact,international division of labor and technical level present a one-way positive impact,and trade competitiveness and technical level present a two-way negative impact. Therefore,China should increase investment and improve productivity at home,and deepen the international division of labor and actively par⁃ticipate in the construction of value chain in order to improve the technical level of equipment manufacturing industry.%文章以“中国制造2025”“、工业4.0”时代来临为现实背景,在分析装备制造业技术进步的国内及国际效应作用机理的基础上,借助面板和VAR模型从实证角度验证我国装备制造业技术进步的内外部效应。研究发现,内部效应中,装备制造业收入及能耗效率指标与技术水平呈现双向正面影响,利润与技术水平为单向正面,就业与技术水平为双向负面;外部效应中,装备制造业引进外资质量与技术水平呈现双向正面影响,国际分工程度与技术水平为单向正面,贸易竞争力与技术水平为双向负面。因此为提升装备制造业技术水平,国内应加大投入,提高

  12. Co-expression module analysis reveals biological processes, genomic gain, and regulatory mechanisms associated with breast cancer progression

    Directory of Open Access Journals (Sweden)

    Derow Catherine K

    2010-05-01

    Full Text Available Abstract Background Gene expression signatures are typically identified by correlating gene expression patterns to a disease phenotype of interest. However, individual gene-based signatures usually suffer from low reproducibility and interpretability. Results We have developed a novel algorithm Iterative Clique Enumeration (ICE for identifying relatively independent maximal cliques as co-expression modules and a module-based approach to the analysis of gene expression data. Applying this approach on a public breast cancer dataset identified 19 modules whose expression levels were significantly correlated with tumor grade. The correlations were reproducible for 17 modules in an independent breast cancer dataset, and the reproducibility was considerably higher than that based on individual genes or modules identified by other algorithms. Sixteen out of the 17 modules showed significant enrichment in certain Gene Ontology (GO categories. Specifically, modules related to cell proliferation and immune response were up-regulated in high-grade tumors while those related to cell adhesion was down-regulated. Further analyses showed that transcription factors NYFB, E2F1/E2F3, NRF1, and ELK1 were responsible for the up-regulation of the cell proliferation modules. IRF family and ETS family proteins were responsible for the up-regulation of the immune response modules. Moreover, inhibition of the PPARA signaling pathway may also play an important role in tumor progression. The module without GO enrichment was found to be associated with a potential genomic gain in 8q21-23 in high-grade tumors. The 17-module signature of breast tumor progression clustered patients into subgroups with significantly different relapse-free survival times. Namely, patients with lower cell proliferation and higher cell adhesion levels had significantly lower risk of recurrence, both for all patients (p = 0.004 and for those with grade 2 tumors (p = 0.017. Conclusions The ICE

  13. Chemical and biological nonproliferation program. FY99 annual report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This document is the first of what will become an annual report documenting the progress made by the Chemical and Biological Nonproliferation Program (CBNP). It is intended to be a summary of the program's activities that will be of interest to both policy and technical audiences. This report and the annual CBNP Summer Review Meeting are important vehicles for communication with the broader chemical and biological defense and nonproliferation communities. The Chemical and Biological Nonproliferation Program Strategic Plan is also available and provides additional detail on the program's context and goals. The body of the report consists of an overview of the program's philosophy, goals and recent progress in the major program areas. In addition, an appendix is provided with more detailed project summaries that will be of interest to the technical community.

  14. Progress of Researches on the Biological Control of Spiny Black Whitefly(Aleurocanthus spiniferus Quaintance)%黑刺粉虱生物防治研究进展

    Institute of Scientific and Technical Information of China (English)

    唐美君

    2001-01-01

    The general situation of the researches on biological control ofspiny black whitefly (Aleurocanthus spiniferus Quaintance)was summarized,the kinds of the natural enemies of spiny black whitefly were described,the species and the dominant species in different areas and the progress of the investigation and application of the parasitic wasps and entomogenous fungi of spiny black whitefly were especially detailed. Subjects of further researches were put forward.%综述了黑刺粉虱生物防治研究概况,介绍了黑刺粉虱的天敌种类,着重叙述了黑刺粉虱寄生蜂、虫生真菌的种类、各地的优势种以及研究、应用的进展,提出了今后值得深入研究的几个问题。

  15. Research and development of methods/utilities and rules for managing cooperation for performance improvement in government offices. Second Technical progress report, September 1, 1992--January 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Kurstedt, H.A.

    1993-03-01

    Purpose is to help managers approach their responsibilities proactively, so that they can anticipate problems and take actions to alleviate or eliminate those problems. Continuous performance improvement, the philosophy behind total quality management, requires working cooperatively to do a little better each day. The most effective tools are working through a closed set of 9 methods: setting expectations, charting, defining indicators and standards, collecting and logging data, converting data to information, organizing and presenting information, reviewing status and progress, self-management, and appraising. In addition, there are 8 rules: focus on what you can do, supply physical evidence of progress, pay attention to detail, inspect (don`t expect), review progress routinely and frequently, face ``success/fail`` squarely, communicate crisply, and conduct honest, open appraisals. Scope and plans of the draft research plan (study areas) are described.

  16. Research and development of a unified approach to operations scheduling for electric power under uncertainty. Technical progress report, June 1979-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Larson, R.E.

    1980-06-01

    The objective of this study was to develop a unified approach for operations schedulng in electric power systems that explicitly takes into account sources of uncertainty present at all levels in this problem. This objective requires formulating the operations scheduling problem as a single, integrated problem, and developing solution methodologies that start from this integrated formulation and progress to subproblem solution methods that are consistent with it. Progress for the first year of the project is reported. Information is included on: problem definition; time-scale decomposition; stochastic optimization of both parallel and series reservoir systems; stochastic production simulation; maintenance scheduling and nuclear refueling; and short-term resource scheduling. (LCL)

  17. Actions, progress and prospects in implementation of the Convention on Biological Diversity during the past 20 years in China

    Directory of Open Access Journals (Sweden)

    Jianyong Wu

    2012-09-01

    Full Text Available The Convention on Biological Diversity (CBD was adopted by United Nations Conference of Environment and Development (UNCED in June 1992 as a milestone event. During the past 20 years, China established the national coordination mechanisms for CBD implementation in 1993, conducted a country study for biodiversity conservation during 1995–1997, formulated China National Biodiversity Conservation Strategy and Action Plan during 2007–2010, founded the National Committee for Biodiversity Conservation in 2011, and, aiming to CBD’s objectives, implemented a lot of researches and actions for biodiversity conservation, including: protection of ecosystems such as forests, grasslands, deserts, wetlands and marine areas; investigations, inventory and databases for species; increased protection of rare and endangered species; control of alien invasive species; and risk assessment for genetically-modified organisms. Challenges to biodiversity conservation include, establishment of biodiversity monitoring system, in situ conservation, access and benefit sharing of genetic resources, and protection and application of traditional knowledge. Lastly, we report potential research topics for biodiversity conservation.

  18. A "Fear" Studies Perspective and Critique: Analyzing English and Stengel's Progressive Study of Fear and Learning in "Education Theory." Technical Paper No. 37

    Science.gov (United States)

    Fisher, R. Michael

    2011-01-01

    The author critiques the progressive approach of two contemporary educational philosophers (English and Stengel) on the topic of fear and learning. Using a postmodern integral approach, this article examines the tendency of reductionism, individualism, and psychologism as part of a hegemonic liberalism and modernism in discourses on fear and…

  19. Materials testing and requirement for the ERDA nuclear-powered artificial heart. Technical progress report, July 15, 1975--May 30, 1976. [BIOMER and AVCOTHANE

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, J. D.; Hufferd, W. L.; Lyman, D. J.

    1976-01-01

    The two materials currently being used for the artificial heart fabrication are BIOMER and AVCOTHANE. BIOMER is a polyether urethane polymer. AVCOTHANE is a proprietary polyurethane/polydimethylsiloxane polymer blend. Research progress on the chemical degradation, mechanical strength, and blood compatibility is reported. (TFD)

  20. Silicon Germanium (SiGe) Radioisotope Thermoelectric Generator (RTG) Program for space missions. Fifteenth technical progress report, August 1-31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Whitmore, C. W.; Silverman, G.

    1980-01-01

    This program consists of the following three tasks: Multi-Hundred Watt RTG for the Galileo Probe Mission; Reestablishment of Silicon Germanium Unicouple Capability; and General Purpose Heat Source RTG for the International Solar Polar and Galileo Orbiter Missions. Details of program progress for each task, including a milestone schedule and a discussion of current problem areas (if any) are presented.

  1. Geothermal resource assessment of Mt. Hood volcano, Oregon, Phase I study. Technical progress report No. 2, October 1, 1977--March 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Hull, D.A.

    1978-05-31

    Several phases of the Mt. Hood geothermal resource assessment project are nearing completion. Most of the field work has been completed for the geologic study, gravity survey, and water sampling portions of the project. Thermal modelling, water analyses, rock analyses and age dating, and preparation of a complete Bouguer gravity map are in progress.

  2. Design, engineering, and evaluation of refractory liners for slagging gasifiers. Second annual technical progress report, 1 October 1979-30 September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Booth, G.; Firestone, R. F.; Greaves, M. J.; Hales, C.; Lamoureux, J. P.; Ledford, R. R.

    1980-10-01

    The program has been making steady progress to completion. The refractory liner test system is a much more complex design than originally proposed, but it is also safer and better able to simulate the actual coal gasification environment to which refractories will be exposed. Consequently, the data from the tests will be more reliable and the final handbook more useful for refractory liner design.

  3. Development of automated welding process for field fabrication of thick walled pressure vessels. Fourth quarter technical progress report for period ending September 28, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Progress is reported in research aimed at optimizing an automated welding process for the field fabrication of thick-walled pressure vessels and for evaluating the welded joints. Information is included on the welding equipment, mechanical control of the process, joint design, filler wire optimization, in-process nondestructive testing of welds, and repair techniques. (LCL)

  4. Synthesis of 6-Methyl-9-n-propyldibenzothiophene-4-ol. Quarterly technical progress report No. 4, April 25--July 25, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Eisenbraun, E.J.

    1991-07-25

    The material covered in this report is divided into two parts: further cyclization experiments on 1,4-diethyl-2-[(2`- methoxyphenyl)thio]benzene and its sulfone both by chemical and photochemical means, and progress toward synthesis of modified target molecule, 9-isopropyl-4-methoxy-6-methyldibenzo-thiophene. 8 refs, figs.

  5. Design, engineering, and evaluation of refractory liners for slagging gasifiers. Second annual technical progress report, 1 October 1979-30 September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Booth, G.; Firestone, R. F.; Greaves, M. J.; Hales, C.; Lamoureux, J. P.; Ledford, R. R.

    1980-10-01

    The program has been making steady progress to completion. The refractory liner test system is a much more complex design than originally proposed, but it is also safer and better able to simulate the actual coal gasification environment to which refractories will be exposed. Consequently, the data from the tests will be more reliable and the final handbook more useful for refractory liner design.

  6. Evaluation and capacity building to improve precollege science and mathematics achievement in the US: 10 CFR, Part 605. Technical progress report, June--December 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    The National Center for Improving Science Education has undertaken activities to achieve evaluation goals for DOE`s Precollege programs: develop means to determine program quality; develop means for determining the contribution of DOE precollege programs to both teacher enhancement and student achievement; provide evaluation designs and instruments and reports of program quality and impact; and strengthen both DOE`s and the Labs` capacity to do both short- and long-term planning as well as deliver effective programs and evaluation. Appendices include evaluation/technical assistance report, profiling teacher research participation and teacher development programs, teacher surveys, impact assessment design, and teacher research participation programs anecdotes for 8 labs.

  7. 男性同性恋生物学成因的研究进展%Progress in research on the biological reason of male homosexuality

    Institute of Scientific and Technical Information of China (English)

    于微; 冯铁建

    2012-01-01

    男性同性恋是一种普遍存在的、成因未明的复杂生命现象.普遍认为其形成是由生物因素和环境因素共同决定的.对其生物学因素的研究主要集中于遗传学、神经生物学和发育及内分泌学的范畴,目前已取得一定的进展.本文将从生物学角度对男同性恋成因的研究进行综述,以指导今后该领域的研究.%Male homosexuality is a complex phenomenon which is universal and with unknown causes.Researchers believe that both biological and environmental factors have played a role in its pathogenesis.Researches focusing on genetics,neurobiology,development and endocrinology have made certain progress.In this paper,we have reviewed the biological causes of male homosexuality,which may provide clues for further research in this field.

  8. Research Progress on Biological Function and Application of Lecithin%卵磷脂的生物学功能及其应用

    Institute of Scientific and Technical Information of China (English)

    李贞

    2016-01-01

    近年来,卵磷脂的生物学功能越来越受到人们的关注,其在调节代谢、增强体能、强化脑部功能、调节血脂等方面具有较好的功效,在多个领域有着广泛的应用。主要综述了卵磷脂的生物功能及其应用的领域,以便人们更深入地了解卵磷脂。%In recent years, the biological function of lecithin is arousing more and more public attention. Lecithin shows good performance in regulating metabolism, enhancing physical fitness, strengthening brain function and regulating blood lipid, which is widely applied in various fields. The research progress on biological function and application of lecithin were reviewed, so as to provide references for the deeper understanding of lecithin.

  9. 卡拉胶的生物活性及分子修饰研究进展%Research Progress on Biological Activity and Chemical Modification of Carrageenan

    Institute of Scientific and Technical Information of China (English)

    田秀芳; 李平

    2012-01-01

    Carrageenan,as a family of sulfated polysaccharides with unique structure,had many kinds of biological activity.However,its application in biomedicine field was limited because of large molecular weight.Research on the biological activity of carrageenan in antivirus,antitumor and anticoagulant were synopsis introduced,emphasizing to introduce the research progress on the chemical modification and derivatives of carrageenan.%卡拉胶作为一种结构独特的硫酸多糖,具有多种生物活性,但因分子量过大,使其在生物医药领域的应用受到限制。文章简要介绍了近年来有关卡拉胶抗病毒、抗肿瘤、抗凝血等生物活性的研究,进一步介绍了卡拉胶分子修饰及其衍生物生物活性的研究进展。

  10. 生物法制备低过敏乳的研究进展%Progress review on production of hypoallergenic milk by biological methods

    Institute of Scientific and Technical Information of China (English)

    叶笑艳; 钱方; 孙洋; 牟光庆; 姜淑娟

    2013-01-01

    Most of milk proteins in milk have potential allergens, which led to allergy of a few people with allergic constitution when ingesting milk. The methods of reducing milk allergy mainly include physical methods, chemical methods and biological methods, which could destroy protein allergy epitopes. Compared with physical methods and chemical methods, biological methods can not only be more effective to reduce milk allergy, but also led to more typical flavor. The composition of al-lergenic proteins, their epitopes in milk was mainly introduced in this paper. Two kinds of biological methods (protease hydrolysis, Lactic acid bacteria fermentation) to produce hypoallergenic milk and their progress review were elaborated, which provides reference basis for hypoaller- genie milk products.%牛乳中的乳蛋白绝大多数潜在过敏原,致使部分过敏体质的人群在摄入牛乳时发生过敏现象.降低牛乳蛋白过敏性的方法主要是通过物理法、化学法和生物法破坏蛋白质的过敏表位.与物理法、化学法比较,生物法不仅能更有效降低牛乳的过敏性,还可以赋予食品更多典型风味.文章主要介绍牛乳中过敏蛋白的组成及过敏表位,重点阐述两种制备低过敏乳的生物法(酶法水解和乳酸菌发酵法)及其研究进展,为制备低过敏乳制品提供参考依据.

  11. Biased Technical Progress and Transitions of Economic Growth Mode in China%偏向型技术进步与中国经济增长方式的转变

    Institute of Scientific and Technical Information of China (English)

    张云辉; 王天尧

    2014-01-01

    Through economic growth accounting method and combining with economic growth data since the reform and open up , this paper analyzes China's economic growth by dividing it into different stages.The study finds the current China’s economic growth mode is in the initial stage and is characterized by greater resource consumption, relying on capital investment, income inequality and so on.It is mainly caused by that China's eco-nomic growth is excessively dependent on capital-biased technical progress and it slows down the sustainable economic growth .To break through this growth resistance, we must use the technical progress matching with China's resource, namely labor-biased technical progress.Only by taking these methods, we can guide the economic growth from the initial stage to the advanced one .The specific measure is taking induced innovation in the production field .%通过经济增长核算的方法,结合改革开放以来经济增长数据将中国经济增长分阶段进行分析。研究发现,目前中国经济增长方式处在初级阶段,特点是资源消耗大、增长依靠资本投入、收入不平等。造成这种情况的主要原因是中国的经济增长过分地依赖于资本偏向型技术进步,进而导致经济的可持续增长受阻。要想突破这种增长阻力,必须利用合乎中国资源禀赋的技术进步,即劳动偏向型技术进步,才能引导经济增长方式由低级阶段转向高级阶段,具体措施是在生产领域采取诱致性创新。

  12. A charge distribution analysis instrument for catalysis and material science applications. Third quarterly technical progress report, April 1, 1994--June 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Freund, F.

    1994-08-05

    Key component in the CDA instrument is the differential capacitive force sensor. The CDA instrument has four basic components: OEM analytical balance, flexure point and capacitor plates, gas confinement tower and high-voltage bias electrodes, and the furnace. Phyton is in position to purchase an OEM analytical balance; negotations are underway for obtaining the feedback control circuitry for the differential capacitive force sensor. Progress with the differential capacitive force sensor is reviewed.

  13. GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 28 March 1994--25 September 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-20

    The progress on the radioisotope generators and ancillary activities is described. This report is organized by program task as follows: spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; design, reviews, and mission applications; project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; contractor acquired government owned property (CAGO) acquisition.

  14. New Metallization Technique Suitable for 6-MW Pilot Production of Efficient Multicrystalline Solar Cells Using Upgraded Metallurgical Silicon: Final Technical Progress Report, December 17, 2007 -- June 16, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Ounadjela, K.; Blosse, A.

    2010-08-01

    This report describes CaliSolar's work as a Photovoltaic Technology Incubator awardee within the U.S. Department of Energy's Solar Energy Technologies Program. The term of this subcontract with the National Renewable Energy Laboratory was two years. During this time, CaliSolar evolved from a handful of employees to over 100 scientists, engineers, technicians, and operators. On the technical side, the company transitioned from a proof-of-concept through pilot-scale to large-scale industrial production. A fully automated 60-megawatt manufacturing line was commissioned in Sunnyvale, California. The facility converts upgraded metallurgical-grade silicon feedstock to ingots, wafers, and high-efficiency multicrystalline solar cells.

  15. Development and testing of commercial-scale, coal-fired combustion systems, Phase 3. Technical progress report, October 1990--December 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    The US Department of Energy`s Pittsburgh Energy Technology Center (PETC) is actively pursuing the development and testing of coal-fired combustion systems for residential, commercial, and industrial market sectors. In response, MTCI initiated the development of a new combustor technology based on the principle of pulse combustion under the sponsorship of PETC (Contract No. AC22-83PC60419). The initial pulse combustor development program was conducted in three phases (MTCI, Development of a Pulsed Coal Combustor Fired with CWM, Phase III Final Report, DOE Contract No. AC22-83PC60419, November 1986). Phase I included a review of the prior art in the area of pulse combustion and the development of pulse combustor design concepts. It led to the conclusion that pulse combustors offer technical and base-of-operation advantages over conventional burners and also indicated favorable economics for replacement of oil- and gas-fired equipment.

  16. Advanced development of fine coal desulfurization and recovery technology. Quarterly technical progress report, October 1, 1976--December 31, 1976. [53 references

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, R.W.; Wheelock, T.D.

    1977-02-01

    The improvement and technical development of promising methods for desulfurizing and recovering fine coal underway includes froth flotation, selective oil agglomeration, pelletization, and a chemical desulfurization process which involves leaching fine coal with a hot dilute solution of sodium carbonate containing dissolved oxygen under pressure. A preliminary assessment of the state of the art and review of the technical literature has been made. Equipment and apparatus have been assembled for small-scale laboratory experiments in froth flotation, oil agglomeration and chemical desulfurization. Preliminary froth flotation tests have been carried out on an Iowa coal to establish baseline data. Quite unexpectedly these tests indicated that aluminum nitrate may be an activator for coal because it served to increase the recovery of coal. Several potential flotation depressants for pyrite have been screened by measurement at the zeta potential and floatability of pyrite or coal in aqueous suspensions containing the potential depressants. The following reagents show some promise as pyrite depressants: ferric chloride, sodium cyanide, ammonium thiocyanate, and the disodium salt of ethylenediaminetetraacetic acid. Preliminary plans have been prepared for a continuous flow bench-scale system to demonstrate the process. This system will include equipment for grinding and pretreating the coal as well as equipment for demonstrating froth flotation, selective oil agglomeration and pelletization. An investigation of coal microstructure as it relates to coal beneficiation methods has also been initiated. The distribution of various forms of pyrite by size and crystal structure has been determined for two cannel samples of coal through application of scanning electron microscope techniques.

  17. Research Progress on Biological Activites of Lichens Secondary Metabolites%地衣次生代谢物生物活性的研究进展

    Institute of Scientific and Technical Information of China (English)

    古丽加汗·沙吾提; 阿不都拉·阿巴斯

    2007-01-01

    Lichens are a world-wide spread consortium of fungal and photosynthetic partners. Lichens produce a wide array of both primary and secondary metabolites (lichen substances). The lichen substances may be classified into the following groups: aliphatic lichen substances,aromatic lichen substances and carbohydrates (polysaccharides). Lichen metabolites exert a wide variety of biological actions including antibiotic, antimycobacterial, antiviral, antiinflammatory, analgesic, antipyretic, antiproliferative and cytotoxic effects. This paper mainly reviews research progress of studies on biological activities of lichens secondary metabolites including chemistry of lichen substances,the possible roles of lichens secondary metabolites in nature and biological activities of lichens secondary metabolites particular attention is paid to some secondary metabolites of lichens,focusing on a number of its biological activities in different fields.%地衣是一种真菌与藻类的共生体,是广泛分布于世界各地.地衣可以产生很多初生和次生代谢物(地衣物质).地衣物质分为脂肪族地衣物质,芳香族地衣物质和碳水化合物(多糖类)等几个组.地衣代谢物用于一系列各种各样的生物学行为包括抗生素、抗细菌、抗病毒、抗炎、止痛、除虫、抗增殖和细胞毒性效应等.本文主要综述了地衣次生代谢物的化学分类,地衣次生代谢物在自然界中的重要作用,地衣次生代谢物的生物活性等几个方面,并集中综述了有些重要地衣次生代谢物及其在不同领域中的几种生物活性问题.

  18. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, second quarter 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-25

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company`s Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO{sub x} combustion technologies on NO{sub x} emissions and boiler performance. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO{sub x} control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO{sub x} concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progress report presents the LNCFS Level I short-term data collected during this quarter. In addition, a comparison of all the long-term emissions data that have been collected to date is included.

  19. 近十年中国生物入侵研究进展%Progress of biological invasions research in China over the last decade

    Institute of Scientific and Technical Information of China (English)

    鞠瑞亭; 李慧; 石正人; 李博

    2012-01-01

    the field of biological invasions research in China over the last decade, there are still large knowledge gaps. This paper reviews progress in the field of biological invasions research since 2000 as it relates to China, covering the diversity, colonization and immigration patterns of invasive species, mechanisms and ecological effects of biological invasions, and management and control of invasive species. In China, 529 invasive alien species have been identified, which originated primarily from South and North America, and the major taxa included terrestrial plants, terrestrial invertebrates, and microorganisms. We found a higher prevalence of invasive species in the eastern and southern provinces, compared to the western and northern provinces in China. This pattern is likely due to the differences in the level of economic development and environmental suitability between the two regions. Moreover, with further economic development, China may face more serious biological invasions in the future. These invasions of alien species are largely the combined results of the interactions between the intrinsic traits of these species along with resource opportunities and disturbances by human beings. Many mechanisms are responsible for successful invasions of alien species, but phenotypic plasticity, adaptive evolution, enemy release, interspecific mutualism or commensalism, and new allelochemicals may be primary causative factors. Biological invasions in China have caused serious impacts on native ecosystems, including biodiversity and ecosystem services, alteration of biogeochemical cycles, threats to agricultural and forestry production, traffic and shipping, environmental safety, and public facilities. China has also made progress in the detection and monitoring of invasive species, risk analysis, biological control, radical elimination, and ecological restoration of degraded ecosystems. We suggest several issues that need to be addressed in invasive species research in

  20. 1993 Annual progress report for subsidiary agreement No. 2 (1991--1996) between AECL and US/DOE for a radioactive waste management technical co-operative program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    A coordinated research program on radioactive waste disposal is being carried out by the Atomic Energy of Canada Limited and the US Department of Energy. This annual report describes progress in the following eight studies: Fundamental materials investigations; In-situ stress determination; Development of a spent fuel dissolution model; Large block tracer test--Experimental testing of retardation models; Laboratory and field tests of in-situ hydrochemical tools; Cigar Lake--Analogue study, actinide and fission product geochemistry; Performance assessment technology exchange; and Development of multiple-well hydraulic test and field tracer test methods.

  1. Characterization of open-cycle coal-fired MHD generators. 14th/15th quarterly technical progress report, February 1-July 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Wormhoudt, J.; Yousefian, V.; Weinberg, M.; Kolb, C.; Martinez-Sanchez, M.; Cheng, W.; Bien, F.; Dvore, D.; Unkel, W.; Stewart, G.

    1980-09-01

    The successful design of full-scale, open-cycle, coal-fired MHD generators for baseload electrical production requires a detailed understanding of the plasma chemical and plasma dynamic characteristics of anticipated combustor and channel fluids. Progress in efforts to model the efficiency of an open-cycle, coal-fired MHD channel based on the characterization of the channel flow as well as laboratory experiments to validate the modeling effort as detailed. In addition, studies related to understanding arcing phenomena in the vicinity of an anode are reported.

  2. What do we really know about the signalling role of plumage colour in blue tits? A case study of impediments to progress in evolutionary biology.

    Science.gov (United States)

    Parker, Timothy H

    2013-08-01

    effects or a likelihood of bias. Last, researchers studying blue tit plumage have often developed ad hoc explanations for deviations of results from their predictions. Revising hypotheses in light of data is appropriate, but these revised hypotheses were rarely tested with new data. The only highly robust conclusion supported by meta-analysis is that male blue tits have plumage that reflects more light in the ultraviolet and yellow wavelengths than the plumage of females. Various other effects, including condition-dependence of plumage colour expression and a tendency for females to adjust the sex ratio of their offspring in response to male colour, remain uncertain. These obstacles to progress in the blue tit plumage literature are likely common in evolutionary biology, and so I recommend changes to incentive structures which may improve progress towards scientific understanding in this discipline.

  3. Simultaneous high-temperature removal of alkali and particulates in a pressurized gasification system. Final technical progress report, April 1981-July 1983

    Energy Technology Data Exchange (ETDEWEB)

    Mulik, P.R.; Alvin, M.A.; Bachovchin, D.M.

    1983-09-01

    This program is directed at performing experimental and analytical investigations, deriving system designs, and estimating costs to ascertain the feasibility of using aluminosilicate-based getters for controlling alkali in pressurized gasification systems. Its overall objective is to develop a plan for evaluating a scaled-up version of the gettering process as a unit operation or as an integral part of a particulate removal device. This report describes work completed on the four technical program tasks: Thermodynamic projections; Getter Selection and Qualification; System Performance Projections; and Program Definition for Concept Scale-up during the 27-month contract performance period. Work completed on the thermodynamic projections includes a data base update, development of alkali phase diagrams, and system performance projections. Getter selection and qualification efforts involved over 70 kinetic studies in which a leading candidate getter - emathlite - was selected and characterized. System performance projections identified a packed-bed configuration containing relatively large getter pellets as the preferred contacting device for a full-scale unit. For emathlite, we concluded that full-scale unit bed heights of 2 m or less would be required if we assume annual replacement on the basis of bed saturation capacity. Concept scale-up work involved defining the hardware and test program requirements for further development of the emathlite packed-bed system. 56 references, 80 figures, 74 tables.

  4. Environmental and economic assessment of discharges from Gulf of Mexico Region Oil and Gas Operations. Quarterly technical progress report, January 1, 1994--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Gettleson, D.A.

    1994-04-21

    The primary objectives of the project are to increase the base of scientific knowledge concerning (1) the fate and environmental effects of organics, trace metals, and NORM in water, sediment, and biota near several offshore oil and gas facilities; (2) the characteristics of produced water and produced sand discharges as they pertain to organics, trace metals, and NORM variably found in association with the discharges; (3) the recovery of four terminated produced water discharge sites located in wetland and high-energy open bay sites of coastal Louisiana and Texas; (4) the economic and energy supply impacts of existing and anticipated federal and state offshore and coastal discharge regulations; and (5) the catch, consumption and human use patterns of seafood species collected from coastal and offshore waters. The products of the effort will be a series of technical reports detailing the study procedures, results, and conclusions which contribute to the transfer of technology to the scientific community, petroleum industry, and state and federal programs.

  5. Geothermal space/water heating for Mammoth Lakes Village, California. Quarterly technical progress report, 13 December 1976-12 March 1977

    Energy Technology Data Exchange (ETDEWEB)

    Sims, A.V.; Racine, W.C.

    1977-01-01

    During the second three months of this feasibility study to determine the technical, economic and environmental feasibility of heating Mammoth Lakes Village, California using geothermal energy, the following work was accomplished. A saturation survey of the number and types of space and water heaters currently in use in the Village was completed. Electric energy and ambient temperature metering equipment was installed. Peak heating demand for Mammoth Lakes was estimated for the years 1985, 1990 and 2000. Buildings were selected which are considered typical of Mammoth Lakes in terms of their heating systems to be used in estimating the cost of installing hydronic heating systems in Mammoth. Block diagrams and an order of magnitude cost comparison were prepared for high-temperature and low-temperature geothermal district heating systems. Models depicting a geothermal district heating system and a geothermal-electric power plant were designed, built and delivered to ERDA in Washington. Local input to the feasibility study was obtained from representatives of the State of California Departments of Transportation and Fish and Game, US Forest Service, and Mono County Planning Department.

  6. Undergraduate technical skills training guided by student tutors – Analysis of tutors' attitudes, tutees' acceptance and learning progress in an innovative teaching model

    Directory of Open Access Journals (Sweden)

    Jünger Jana

    2008-04-01

    Full Text Available Abstract Background Skills labs provide a sheltered learning environment. As close supervision and individual feedback were proven to be important in ensuring effective skills training, we implemented a cross-year peer tutor system in our skills lab of internal medicine that allowed intense training sessions with small learning groups (3–4 students taught by one student tutor. Methods The expectations, experiences and criticisms of peer tutors regarding the tutor system for undergraduate skills lab training were investigated in the context of a focus group. In addition, tutees' acceptance of this learning model and of their student tutors was evaluated by means of a pre/post web-based survey. Results 14 voluntary senior students were intensely prepared by consultants for their peer tutor activity. 127 students participated in the project, 66.9% of which responded to the web-based survey (23 topics with help of 6-point Likert scale + free comments. Acceptance was very high (5.69 ± 0.07, mean ± SEM, and self-confidence ratings increased significantly after the intervention for each of the trained skills (average 1.96 ± 0.08, all p Conclusion This study demonstrates that peer teaching in undergraduate technical clinical skills training is feasible and widely accepted among tutees, provided that the tutors receive sufficient training and supervision.

  7. Development of innovative techniques and principles that may be used as models to improve plant performance. Technical progress report, February 1, 1991--January 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Hanna, W.W.; Burton, G.W.

    1991-09-01

    Methods and techniques for transferring germplasm from wild to cultivated species are being developed. The transferred germplasm is being shown to be valuable in plant breeding and in cultivar development. Forty cytoplasms from the wild grassy subspecies monodii (primary gene pool) of Pennisetum glaucum are being tested for cytoplasmic effects on morphological characteristics and forage yield. A`-genome chromosomes from P. purpureum (secondary gene pool) have been transferred to cultivated pearl millet. The A`-chromosome derived lines have been developed into excellent male pollinator lines to produce a new high quality, high yielding grain hybrid for the US. Significant progress is being made in transferring the genes controlling apomixis (to produce true-breeding hybrids) from the tertiary gene pool to cultivated pearl millet. Backcross-4 plants are more pearl millet-like and reproduce by apomixis. New genome combinations have been produced in the apomixis genes transfer program which demonstrate the impact of apomixis on speciation and evolution.

  8. Engineering support services for the DOE/GRI coal-gasification research program. Quarterly technical progress report, October-December 1981

    Energy Technology Data Exchange (ETDEWEB)

    Bostwick, L.E.; Ethridge, T.R.; Starr, D.W.; Shah, K.V.; Hubbard, D.A.; Koneru, P.B.; Smith, M.R.; Ward, W.E.; Wong, E.W.; Zeis, L.A.

    1982-02-01

    Kellogg continued to actively monitor operations at BI-GAS Westinghouse and IGT (for peat gasification). Pilot plant/PDU testing which was monitored and reported includes Westinghouse PDU tests TP-030-3 and TP-031-3 and CFSF test TP-M003-1; Peatgas Pilot Plant test No. 4; and single-stage peat gasification PDU tests BF-22 and BF-23. Kellogg personnel briefed the GRI Project Advisors on current tasks and a DOE representative on peat-related work. The report on the Hygas Data Base Evaluation was approved for issue. Progress was made toward finalizing the report on the Peatgas Data Base Evaluation and the Descriptive Brochure for the DOE/GRI Joint Program. Work on the evaluation of the data base for single-stage peat gasification continued. Review of the Hygas final report was completed.

  9. Application of railgun principle to high-velocity hydrogen pellet injection for magnetic fusion reactor refueling. Technical progress report, [July 16, 1990--August 16, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.

    1991-08-01

    This report contains three documents describing the progress made by the University of Illinois electromagnetic railgun program sponsored by the Office of Fusion Energy of the United States Department of Energy during the period from July 16, 1990 to August 16, 1991. The first document contains a brief summary of the tasks initiated, continued, or completed, the status of major tasks, and the research effort distribution, estimated and actual, during the period. The second document contains a description of the work performed on time resolved laser interferometric density measurement of the railgun plasma-arc armature. The third document is an account of research on the spectroscopic measurement of the electron density and temperature of the railgun plasma arc.

  10. Application of integrated reservoir management and reservoir characterization to optimize infill drilling. Quarterly technical progress report, June 13--September 12, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The eighteen 10-acre infill wells which were drilled as part of the field demonstration portion of the project are all currently in service with no operational problems. These wells consist of fourteen producing wells and four injection wells. The producing wells are currently producing a total of approximately 500 bopd, down from a peak rate of 900 bopd. Unit production is currently averaging approximately 2,800 bopd, 12,000 bwpd and 17,000 bwipd. The paper describes progress on core analysis, gas-oil/oil-gas permeability tests, water-oil/oil-water permeability tests, water-gas permeability tests, electrical resistivity measurements, capillary pressure tests, reservoir surveillance, and paleontologic analysis.

  11. Application of integrated reservoir management and reservoir characterization to optimize infill drilling. Quarterly technical progress report, March 13--June 12, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The eighteen 10-acre infill wells which were drilled as part of the field demonstration portion of the project are all currently in service with no operational problems. These wells consist of fourteen producing wells and four injection wells. The producing wells are currently producing a total of approximately 650 bopd, down from a peak rate of 900 bopd. Unit production is currently averaging approximately 3,000 bopd, 12,000 bwpd and 18,000 bwipd. The paper describes progress in core analysis, reservoir surveillance, well stimulation, validation of reservoir characterization (includes thin section analyses, depositional environments, and paleontologic analysis), material balance decline curve analysis, and validation of reservoir simulation (includes geostatistical and deterministic).

  12. Identification and validation of heavy metal and radionuclide hyperaccumulating terrestrial plant species, Quarterly technical progress report, December 20, 1995--March 20, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Kochian, L.; Brady, D.; Last, M.; Ebbs, S.

    1995-12-01

    Although the period covered by this progress report began on December 20, 1994, which was the date that DOE approved the Interagency Agreement, the agreement was not approved by USDA until January 9, 1995 and the first scientists working on the project were not hired until February 1, 1995. The first goal of the research supported by the Interagency Agreement is to use hydroponic techniques to identify plant species and genotypes with potential for heavy metal hyperaccumulation for planting on a test site at Silverbow Creek and for radionuclide ({sup 90}Sr and {sup 137}Cs) accumulation on a test site at INEL, Idaho, later this year. The second goal of this research is to identify soil amendment procedures that will enhance the bioavailability of heavy metals and radionuclides in the soil without increasing the movement of the contaminants of concern (COC`s) into the groundwater. Our initial research covered in this report focuses on the first goal.

  13. Process feasibility study in support of silicon material, Task I. Quarterly technical progress report (XVIII), December 1, 1979-February 29, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Yaws, C.L.; Li, K.Y.

    1980-03-01

    Analyses of process system properties were continued for important chemical materials involved in the several processes under consideration for semiconductor and solar cell grade silicon production. Major activities were devoted to physical, thermodynamic and transport property data for silicon. Property data are reported for vapor pressure heat of vaporization, heat of sublimation, liquid heat capacity and solid heat capacity as a function of temperature to permit rapid usage in engineering. Chemical engineering analysis of the HSC process (Hemlock Semiconductor Corporation) for production of silicon was initiated. The process is based on hydrogen reduction of dichlorosilane (DCS) to produce the polysilicon. The chemical vapor deposition reaction for DCS is faster in rate than the conventional process route which utilizes trichlorosilane (TCS) as the silicon raw material. Status and progress are reported for primary activities of base case conditions (30%), reaction chemistry (25%) and process flow diagram (20%). Discussions with HSC and construction of a process flow diagram are in progress. Preliminary economic analysis of the BCL process (case B) was completed. Cost analysis results are presented based on a preliminary process design of a plant to produce 1000 metric tons/year of silicon. Fixed capital investment for the plant is $14.35 million (1980 dollars) and product cost without profit is 11.08 $/kg of silicon (1980 dollars). Cost sensitivity analysis indicate that the product cost is influenced most by plant investment and least by labor. For profitability, a sales price of 14 $/kg (1980 dollars) gives a 14% DCF rate of return on investment after taxes.

  14. Biological characteristics and research progress of enterovirus 71%肠道病毒71型的生物学特征及研究进展

    Institute of Scientific and Technical Information of China (English)

    戈小琴; 李鸿钧

    2010-01-01

    In recent years, the prevalence of enterovirus 71 (EV71) shows rising trend in Asia-Pacific area. The hand, foot and mouth disease caused by EV71 attracts widespread attention, and becomes a large challenge for preventive medicine and basic scientific research. This paper reviews research progress in biological characteristics, epidemiology, pathogenesis, clinical and laboratory diagnosis, prevention, and treatment of EV71.%近年来,肠道病毒71型(enterovirus 71,EV71)的流行在亚太地区呈逐渐上升趋势.EV71导致的手足口病已引起社会各界广泛关注,并成为医学预防和基础科研的挑战.此文就EV71的生物学特性、流行病学、致病机制、临床和实验室诊断、预防及治疗等方面的研究进展作一综述.

  15. Synthesis and evaluation of boron compounds for neutron capture therapy of malignant brain tumors. Technical progress report No. 1, May 1, 1990--January 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Soloway, A.H.; Barth, R.F.

    1990-12-31

    Boron neutron capture therapy offers the potentiality for treating brain tumors currently resistant to treatment. The success of this form of therapy is directly dependent upon the delivery of sufficient numbers of thermal-neutrons to tumor cells which possess high concentrations of B-10. The objective of this project is to develop chemical methodology to synthesize boron-containing compounds with the potential for becoming incorporated into rapidly-dividing malignant brain tumor cells and excluded from normal components of the brain and surrounding tissues, to develope biological methods for assessing the potential of the compound by use of cell culture or intratumoral injection, to develop analytical methodology for measuring boron in cells and tissue using direct current plasma atomic emission spectroscopy (DCP-AES) and alpha track autoradiography, to develop biochemical and HPLC procedures for evaluating compound uptake and tissue half-life, and to develop procedures required to assess both in vitro and vivo efficacy of BNCT with selected compounds.

  16. Engineering development of advanced coal-fired low-emission boiler systems. Technical progress report No. 10, January 1995--March 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-17

    The project is on schedule and under budget. The current status is shown in the Milestone Schedule Report included as Appendix A. All Project Plans were updated based on the revised finding level authorized for FY95 and anticipated for FY96. Technology Transfer activities included {open_quotes}supplying{close_quotes} three executives and several team members to the LEBS Workshop, delivering a technical paper at a conference, and working on a Combustion 2000 Session for another conference. ABBES and CeraMem reached agreement concerning Task 7 work, including ownership and disposition of project-purchased equipment to be used during Task 7 and also during Task 11. A test plan was prepared. Task 7 activities for the Low-NO{sub x} Firing System included computational modeling of the firing arrangement. Reasonable comparisons to experimental data previously obtained in the Boiler Simulation Facility were achieved. A kinetic evaluation for both baseline and low NO{sub x} firing arrangements was also performed, with results indicating that the final reducing zone within the main windbox has a dominant effect on NO{sub x} reduction, with higher temperatures being more favorable for lower NO{sub x}. A week of combustion testing was completed in the Fundamental Scale Burner Facility to examine the impact of integrated fuel staging (NO{sub x} reduction via the reburn mechanism), and to explore preliminary vertical staging concepts within the main windbox region. Preliminary results from this testing demonstrated the potential of vertical air staging within the main windbox to augment overfire air. Testing was performed to quantify the coal size distribution and power requirements for one (1) conventional static and four (4) dynamic classifier designs. Results from this testing show the dynamic classifier capable of producing finer grinds of coal at lower relative power requirements.

  17. Undergraduate technical skills training guided by student tutors--analysis of tutors' attitudes, tutees' acceptance and learning progress in an innovative teaching model.

    Science.gov (United States)

    Weyrich, Peter; Schrauth, Markus; Kraus, Bernd; Habermehl, Daniel; Netzhammer, Nicolai; Zipfel, Stephan; Jünger, Jana; Riessen, Reimer; Nikendei, Christoph

    2008-04-09

    Skills labs provide a sheltered learning environment. As close supervision and individual feedback were proven to be important in ensuring effective skills training, we implemented a cross-year peer tutor system in our skills lab of internal medicine that allowed intense training sessions with small learning groups (3-4 students) taught by one student tutor. The expectations, experiences and criticisms of peer tutors regarding the tutor system for undergraduate skills lab training were investigated in the context of a focus group. In addition, tutees' acceptance of this learning model and of their student tutors was evaluated by means of a pre/post web-based survey. 14 voluntary senior students were intensely prepared by consultants for their peer tutor activity. 127 students participated in the project, 66.9% of which responded to the web-based survey (23 topics with help of 6-point Likert scale + free comments). Acceptance was very high (5.69 +/- 0.07, mean +/- SEM), and self-confidence ratings increased significantly after the intervention for each of the trained skills (average 1.96 +/- 0.08, all p teaching model to be sufficient, and a mere 1% expressed the wish for skills training to be provided by faculty staff only. Focus group analyses with tutors revealed 18 different topics, including profit in personal knowledge and personal satisfaction through teaching activities. The ratio of 1:4 tutor/tutees was regarded to be very beneficial for effective feedback, and the personalized online evaluation by tutees to be a strong motivator and helpful for further improvements. The tutors ascribed great importance to the continuous availability of a contact doctor in case of uncertainties. This study demonstrates that peer teaching in undergraduate technical clinical skills training is feasible and widely accepted among tutees, provided that the tutors receive sufficient training and supervision.

  18. Development & testing of industrial scale, coal fired combustion system, phase 3. Eighth quarterly technical progress report, 1 October, 1993--31 December, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Zauderer, B.

    1994-01-31

    The primary objective of the present Phase 3 effort is to perform the final testing at a 20 MMBtu/hr commercial scale of an air cooled, slagging coal combustor for application to industrial steam boilers and power plants. The focus of the test effort will be on combustor durability, automatic control of the combustor`s operation, and optimum environmental control of emissions inside the combustor. In connection with the latter, the goal is to achieve 0.4 lb/MMBtu of SO{sub 2} emissions, 0.2 lb/MMBtu of NO{sub x} emissions, and 0.02 lb particulates/MMBtu. Meeting the particulate goal will require the use of a baghouse or electrostatic precipitator to augment the nominal slag retention in the combustor. The NO{sub x} emission goal will require a modest improvement over maximum reduction achieved to date in the combustor to a level of 0.26 lb/MMBtu. To reach the SO{sub 2} emissions goal may require a combination of sorbent injection inside the combustor and sorbent injection inside the boiler, especially in high (>3.5%) sulfur coals. Prior to the initiation of the project, SO{sub 2} levels as low as 0.6 lb/MMBtu, equal to 81% reduction in 2% sulfur coals, were measured with boiler injection of calcium hydrate. The final objective is to define suitable commercial power or steam generating systems to which the use of the air cooled combustor offers significant technical and economic benefits. In implementing this objective both simple steam generation and combined gas turbine-steam generation systems will be considered.

  19. AICE Survey of USSR Air Pollution Literature, Volume 15: A Third Compilation of Technical Reports on the Biological Effects and the Public Health Aspects of Atmospheric Pollutants.

    Science.gov (United States)

    Nuttonson, M. Y.

    Ten papers were translated: Maximum permissible concentrations of noxious substances in the atmospheric air of populated areas; Some aspects of the biological effect of microconcentrations of two chloroisocyanates; The toxicology of low concentrations of aromatic hydrocarbons; Chronic action of low concentrations of acrolein in air on the…

  20. Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    Progress made in five areas of research is described briefly. The subtask in oil shale research is on oil shale process studies. For tar sand the subtask reported is on process development. Coal research includes the following subtasks: Coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes the following: Advanced process concepts; advanced mitigation concepts; oil and gas technology. Jointly sponsored research includes: Organic and inorganic hazardous waste stabilization; CROW{sup TM} field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO{sup 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid-state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; characterization of petroleum residua; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process;NMR analysis of samples from the ocean drilling program; oil field waste cleanup using tank bottom recovery process; remote chemical sensor development; in situ treatment of manufactured gas plant contaminated soils demonstration program; solid-state NMR analysis of Mowry formation shale from different sedimentary basins; solid-state NMR analysis of naturally and artificially matured kerogens; and development of effective method for the clean-up of natural gas.

  1. The economical production of alcohol fuels from coal-derived synthesis gas. Quarterly technical progress report number 13, October 1--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    At WVU, Mo{sub 2}S{sub 3} was produced from gas-phase reactions at 1,100 C. The gas-phase reactor was modified to increase product yields and to decrease particle size. Four Chevrel phases were synthesized for catalytic evaluation. In addition, four supported alkali-modified MoS{sub 2} materials were prepared from a single-source precursor, K{sub 2}Mo{sub 3}S{sub 13}. Screening runs have been carried out on some of these materials and others prepared earlier. At UCC and P, test runs on the reactor system have commenced. Higher alcohols up to butanol were observed and identified at high temperatures. Significant progress has been made on the Monte Carlo uncertainty analysis. Frequency distributions have been determined for all of the equipment blocks for the Texaco gasifier cases. For these cases, there is a 10% chance that the actual installed capital cost could exceed the estimated installed capital cost by $40 million dollars. This work will continue with inclusion of variable costs and prediction of the uncertainties in the return on investment. Modifications to the simulated annealing optimization program have been underway in order to increase the level of certainty that the final result is near the global optimum. Alternative design cases have been examined in efforts to enhance the economics of the production of high alcohols. One such process may be the generation of electric power using combustion turbines fueled by synthesis gas.

  2. Characterization of oil and gas waste disposal practices and assessment of treatment costs. Technical progress report, January 1, 1994--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Bedient, P.B.

    1994-04-25

    This report covers work completed during the sixth quarter for the project. The project consists of three tasks: the first relates to developing a database of waste volumes and disposal methods used by the industry; the second and third tasks are aimed at investigating technologies that could be used for the treatment of produced waters and developing cost estimates for those technologies. The remainder of this report describes progress related to the three tasks in the project. Overall, construction of the Production Environmental Database (PED) is ongoing. While much of the data has been collected and entered into the database, a few data categories are still missing, for example, soils and geology and geohydrology. Work is currently under way to collect these data. In addition, a detailed data analysis has begun in order to develop relationships between oil and gas activities and environmental characteristics. In terms of the treatment of produced water, much of the work in the past quarter was focused on analyzing the costs associated with the treatment and disposal of waste residuals such as sludges.

  3. Novel microorganism for selective separation of coal from ash and pyrite; First quarterly technical progress report, September 1, 1993--November 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Misra, M.; Smith, R.W.; Raichur, A.M.

    1993-12-31

    This report summarizes the progress made during the first quarter of the research project entitled ``A Novel Microorganism for Selective Separation of Coal from Ash and Pyrite,`` DOE Grant No. DE-FG22-93PC93215. The objective of this project is to study the effectiveness of a novel hydrophobic microorganism, Mycobacterium phlei (M. phlei), for the selective flocculation of coal from pyrite and ash-forming minerals. During the reporting period, three different coal samples: Illinois No. 6 coal, Kentucky No. 9 coal and Pittsburgh No. 8 coal, were collected to be used in the investigation. The microorganism, M. phlei, was obtained as freeze-dried cultures and the growth characteristics of the bacteria were studied. Scanning electron microphotographs revealed that M. phlei cells are coccal in shape and are approximately 1 {mu}m in diameter. Electrokinetic measurements showed that the Illinois No. 6 and Pittsburgh No. 8 coal samples had an isoelectric point (IEP) around pH 6 whereas M. phlei had an IEP around pH 1.5. Electrokinetic measurements of the ruptured microorganisms exhibited an increase in IEP. The increase in IEP of the ruputured cells was due to the release of fatty acids and polar groups from the cell membrane.

  4. Study of the effects of ambient conditions upon the performance of fan powered, infrared, natural gas burners. Quarterly technical progress report, July 1--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Bai, T.; Yeboah, Y.D.; Sampath, R.

    1995-10-01

    The objective of this investigation is to characterize the operation of fan powered infrared burner (PIR) at various gas compositions and ambient conditions and develop design guidelines for appliances in containing PIR burners for satisfactory performance. During this period, experimental setup with optical and electronic instrumentation that is necessary for measuring the radiant heat output and the emission gas output of the burner has been established. The radiation measurement instrument, an FTIR, has been purchased and installed in the porous burner experimental system. The radiation measurement capability of the FTIR was tested and found to be satisfactory. A standard blackbody source, made by Graseby Infrared, was employed to calibrate the FTIR. A collection duct for emission gas measurement was fabricated and connected to the existing Horiba gas analyzer. Test runs are being conducted for flue gas analysis. A number of published research papers on modeling of porous burners were reviewed. The physical mechanism and theoretical analysis of the combustion process of the PIR burner was formulated. The numerical modeling, and implementation of a PIR burner code at CAU`s computing facility is in progress.

  5. NASA space biology accomplishments, 1982

    Science.gov (United States)

    Halstead, T. W.; Pleasant, L. G.

    1983-01-01

    Summaries of NASA's Space Biology Program projects are provided. The goals, objectives, accomplishments, and future plans of each project are described in this publication as individual technical summaries.

  6. Direct assay of radiation-induced DNA base lesions in mammalian cells. Technical progress report, November 1, 1989--September 1, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-10-01

    Adenine (Ade), 2`-deoxyadenosine (dAdo), 5`-deoxyadenosine monophosphate (dAUT), single stranded poly adenylic acid [poly (dA)], double stranded deoxyadenylic-thymidylic acid [ds poly (dA-T)] and salmon testis DNA were irradiated with 500 Gy under oxic and anoxic conditions. The major damage products were analyzed by BPLC with optical detection and quantitated in terms of the percentage of the adenosine in each model compound found as a specific damage product. Outside of the Ade free base, 8-OH-dAdo was the major oxic damage product from each model compound. The type and quantity of the major damage products depended on the sequence and conformation of the model compounds under anoxic conditions. When dAdo and dAMP were irradiated under anoxic conditions, the major damage product was either the R or S isomer of 8,5`cdAdo and little Ade or {alpha}-dAdo was observed. However, when poly(dA), poly(dA-dT), and salmon testis DNA were {gamma}-irradiated under nitrogen, the major deoxyadenosine damage product was identified as the {alpha}-anomer of deoxyadenosine. No {alpha}-deoxyadenosine was detected after irradiation under oxic conditions. The presence of nucleotides with the {alpha}-configuration at the anomeric carbon atom in the DNA chain may have a significant effect on its tertiary structure and possibly modify its biological activity.

  7. The influence of biological and technical factors on quantitative analysis of amyloid PET: Points to consider and recommendations for controlling variability in longitudinal data.

    Science.gov (United States)

    Schmidt, Mark E; Chiao, Ping; Klein, Gregory; Matthews, Dawn; Thurfjell, Lennart; Cole, Patricia E; Margolin, Richard; Landau, Susan; Foster, Norman L; Mason, N Scott; De Santi, Susan; Suhy, Joyce; Koeppe, Robert A; Jagust, William

    2015-09-01

    In vivo imaging of amyloid burden with positron emission tomography (PET) provides a means for studying the pathophysiology of Alzheimer's and related diseases. Measurement of subtle changes in amyloid burden requires quantitative analysis of image data. Reliable quantitative analysis of amyloid PET scans acquired at multiple sites and over time requires rigorous standardization of acquisition protocols, subject management, tracer administration, image quality control, and image processing and analysis methods. We review critical points in the acquisition and analysis of amyloid PET, identify ways in which technical factors can contribute to measurement variability, and suggest methods for mitigating these sources of noise. Improved quantitative accuracy could reduce the sample size necessary to detect intervention effects when amyloid PET is used as a treatment end point and allow more reliable interpretation of change in amyloid burden and its relationship to clinical course.

  8. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 9, October 1, 1994--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C. [AMAX Research and Development Center, Golden, CO (United States)

    1995-01-25

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by design, and construction of a 2-t/hr process development unit (PDU). The PDU will then be operated to generate 200 ton lots of each of three project coals, by each process. The project began in October, 1992 and is scheduled for completion by March, 1997. During Quarter 9 (October--December, 1995), parametric and optimization testing was completed for the Taggart, Sunnyside, and Indiana VII coal using a 12-inch Microcel{trademark} flotation column. The detailed design of the 2-t/hr PDU grinding, flotation, and dewatering circuits neared completion with the specification of the major pieces of capital equipment to be purchased for these areas. Selective agglomeration test work investigated the properties of various industrial grades of heptane for use during bench- and PDU-scale testing. It was decided to use a hydrotreated grade of commercial heptane due to its low cost and low concentration of aromatic compounds. The final Subtask 6.4 CWF Formulation Studies Test Plan was issued. A draft version of the Subtask 6.5 Preliminary Design and Test Plan Report was also issued, discussing the progress made in the design of the bench-scale selective agglomeration unit. PDU construction work moved forward through the issuing of 26 request for quotations and 21 award packages for capital equipment.

  9. Effects of low-temperature catalytic pretreatments on coal structure and reactivity in liquefaction. Technical progress report, October 1993--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    Song, C.; Huang, L.; Wenzel, K.A.; Hatcher, P.G.; Schobert, H.H.

    1994-02-01

    In this quarter, progress has been made in the following two aspects: The influences of temperature, dispersed Mo catalyst, and solvent on the liquefaction conversion and composition of products from low-rank coals; and the hydrous pyrolysis of a lignite and spectroscopic characterization of its structural transformation during the hydrous pyrolysis. The analytical work described in this quarter also represents molecular-level characterization of products. The purpose of the first part of the work described in this quarter is to study the influences of temperature, solvent and dispersed Mo catalyst on the liquefaction conversion and chemical composition of the products. Many specialty chemicals, including one- to four-ring aromatics, could potentially be produced by liquefying coal. To achieve this goal, not only a high coal conversion but also a desirable product distribution is necessary. Therefore, it is of great importance to understand the structural changes of the coal during reaction and to investigate the conditions under which the aliphatics or aromatics can be removed from the macromolecular structure of coal. This quarterly report also describes the hydrous pyrolysis of Potapsco lignite and spectroscopic characterization of its structural transformation during the hydrous pyrolysis. This work has some implications both on the structural changes of low-rank coals during pretreatment and on the geochemical reactions during coalification stage. Vitrinite, a major component of most coals, is derived from degraded wood in ancient peat swamps. Organic geochemical studies conducted on a series of coalified wood samples derived mostly from gymnosperms have allowed the development of a chemical reaction series to characterize the major coalification reactions which lignin, the major coal-producing component of wood, undergoes.

  10. Adaptive harvest management for the Svalbard population of pink‐footed geese: 2016 progress summary: Technical Report from DCE – Danish Centre for Environment and Energy, No. 86

    Science.gov (United States)

    Johnson, Fred A.; Madsen, Jesper

    2016-01-01

    This document describes progress to date on the development of an adaptive harvest management strategy for maintaining the Svalbard population of pink‐footed geese (Anser brachyrhynchus) near their agreed target level (60,000) by providing for sustainable harvests in Norway and Denmark. This report provides an assessment of the most recent monitoring information (1991-2015) and its implications for the harvest management strategy. By combining varying hypotheses about survival and reproduction, a suite of nine models have been developed that represent a wide range of possibilities concerning the extent to which demographic rates are density dependent or independent. These results suggest that the pink‐footed goose population may have recently experienced a release from density‐dependent mechanisms, corresponding to the period of most rapid growth in population size. Beginning with the 2016 hunting season, harvest quotas will be prescribed on an annual basis rather than every three years because of the potential to better meet population management objectives. Based on updated model weights, the recent observations of population size (74,800), the proportion of the population comprised of one-year-old birds (0.138), and temperature days in Svalbard (20), the optimal harvest quota for the 2016 hunting season is 25,000. The large increase in quota compared to that during first three years of AHM reflects stakeholders’ desire to reduce population size to the goal of 60,000, recognizing that population size remains relatively high and above-average production is expected in 2016 due to a warm spring.

  11. A protocol for evaluating progressive levels of simulation fidelity in the development of technical skills, integrated performance and woman centred clinical assessment skills in undergraduate midwifery students.

    Science.gov (United States)

    Brady, Susannah; Bogossian, Fiona; Gibbons, Kristen; Wells, Andrew; Lyon, Pauline; Bonney, Donna; Barlow, Melanie; Jackson, Anne

    2013-05-24

    Simulation as a pedagogical approach has been used in health professional education to address the need to safely develop effective clinical skills prior to undertaking clinical practice. However, evidence for the use of simulation in midwifery is largely anecdotal, and research evaluating the effectiveness of different levels of simulation fidelity are lacking.Woman centred care is a core premise of the midwifery profession and describes the behaviours of an individual midwife who demonstrates safe and effective care of the individual woman. Woman centred care occurs when the midwife modifies the care to ensure the needs of each individual woman are respected and addressed. However, a review of the literature demonstrates an absence of a valid and reliable tool to measure the development of woman centred care behaviours. This study aims to determine which level of fidelity in simulated learning experiences provides the most effective learning outcomes in the development of woman centred clinical assessment behaviors and skills in student midwives. Three-arm, randomised, intervention trial.In this research we plan to:a) trial three levels of simulation fidelity - low, medium and progressive, on student midwives performing the procedure of vaginal examination;b) measure clinical assessment skills using the Global Rating Scale (GRS) and Integrated Procedural Performance Instrument (IPPI); andc) pilot the newly developed Woman Centred Care Scale (WCCS) to measure clinical behaviors related to Woman-Centredness. This project aims to enhance knowledge in relation to the appropriate levels of fidelity in simulation that yield the best educational outcomes for the development of woman centred clinical assessment in student midwives. The outcomes of this project may contribute to improved woman centred clinical assessment for student midwives, and more broadly influence decision making regarding education resource allocation for maternity simulation.

  12. Installation of a stoker-coal preparation plant in Krakow, Poland. Quarterly technical progress report No. 3, November--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Rozelle, P.

    1996-01-01

    This report describes the progress made during this reporting period of a two year project to demonstrate that the air pollution from a traveling grate stoker being used to heat water at a central heating plant in Krakow, Poland can be reduced significantly by (1) substituting the unwashed, unsized coal currently being used with a mechanically cleaned, double-sized stoker fuel and by (2) optimizing the operating parameters of the stoker. It is anticipated that these improvements will prove to be cost effective and hence be adopted by the other central heating plants in Krakow and indeed, throughout Eastern European cities where coal continues to be the primary source of fuel. EFH Coal Company has formed a partnership with two Polish institutions -- MPEC, a central heating company in Krakow, and Naftokrak-Naftobudowa, preparation plant designers and fabricators, for the execution of this effort. The washability data from a 20mm x 0.5mm size fraction of raw coal from the Nikwa Modrejow Mine were evaluated. The data show that the ash content of this coal can be reduced from 34.0 percent to 9.0 percent by washing in a heavy-media cyclone at 1.725 sp.gr.; the actual yield of clean coal would be 63.1 percent. This product would meet compliance limitations of 500 a of SO{sub 2}/GJ. An evaluation of the predicted results that can be expected when washing five different candidate Polish coals shows that compliance products containing less than 640 a SO{sub 2}/GJ and 10 percent ash at attractive yields can be produced by washing the raw coals in a heavy-media cyclone. Discussions with financial institutions regarding the cost of producing a quality stoker coal in Poland and for identifying sources of private capital to help cost share the project continued. The search for markets for utilizing surplus production from the new plant continued.

  13. Progress of production method and biological activity about astaxanthin%虾青素生产方法及生物活性的研究进展

    Institute of Scientific and Technical Information of China (English)

    黄文文; 洪碧红; 易瑞灶; 刘俊鹏; 陈宇; 王俊坤

    2012-01-01

    介绍了虾青素的生产方法及生物活性的最新研究进展情况.对目前工业化采用的生产方法及技术特点进行了具体的阐述和总结,如从水产品的废弃物、雨生红球藻和红发夫酵母中提取,及由类胡萝卜素合成的方法;介绍了虾青素的诸多生物活性及应用概况,如抗氧化、抗炎抗感染、抗肿瘤、抗疲劳、预防骨质疏松的作用等;并探讨了虾青素的应用价值及开发前景.建立高效绿色的提取分离纯化技术方案,寻找新的生物资源,如发酵培养红球藻、选育高产酵母菌等,是未来需要解决的问题.随着对虾青素药理毒理活性的进一步研究,虾青素不仅用作珍贵水产动物养殖的饵料添加剂,在食品、药品、化妆品和高级营养保健品等领域也将得到广泛的应用.%This article describes astaxanthin production methods and the latest research progress of the biological activity. It summarizes the current industry processing and techniques, such as the extraction from aquatic byproducts, plu-vialis algae and Phaffia yeast, and carotenoid synthesis method. Astaxanthin biological activity and applications, such as anti - oxidation, anti - inflammatory anti - infective, anti - tumor, anti - fatigue, prevention of osteoporosis were also introduced. The products value and development prospects of astaxanthin were proposed. " Green" and efficient extraction and purification technology as well as the fermentation method of the red ball algae, and high - yielding yeasts selection are all need further studies. Pharmacology and toxicology study shows that astaxanthin not only can be used as the bait additives in aquatic farming, but also has a wide application in food, drugs, cosmetics, and high value nutritional health products.

  14. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  15. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  16. Cadmium sulfide/copper sulfide heterojunction cell research by sputter deposition. Quarterly technical progress report, March 1, 1981-June 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, J.A.; Anderson, W.W.; Meakin, J.D.

    1981-08-01

    A second series of hybrid cells with sputter-deposited Cu/sub 2/S layers has been fabricated. An efficiency of about 4 3/4%, without antireflection coating, was achieved for one of the cells. This result approaches the 5 3/4% which was achieved in the first set (different Cu/sub 2/S deposition conditions) and confirms the viability of the sputtering process for this application. Significant progress has been made in fabricating all-sputtered cells with CdS layers deposited by planar magnetron reactive sputtering. Efficiencies of approximately 3%, without antireflection coatings, have been achieved in the as-deposited state for seven cells. Individual cells have yielded a J/sub sc/ of 12 mA/cm/sup 2/, a V/sub oc/ of 0.53V, and a fill factor of 0.72. Taken together these parameters would yield an efficiency of 4 1/2%. A strong coupling is found between the properties of the Cu/sub 2/S and CdS layers. However, the conditions which maximize J/sub sc/, V/sub oc/ and the fill factor do not appear to be mutually exclusive. Reflectance measurements indicate that 30% or more of the incident radiation is being reflected from the front surface of the cells over the wavelength range of the solar spectrum. Thus optimization of the cell parameters with a suitable antireflection coating should yield cell efficiencies of about 6%. Characterization of the junctions formed in the all-sputtered cells under near-optimum deposition conditions indicates that they have remarkable properties in their as-deposited state, being very similar to high performance conventional cells after heat treatment. Junction ideality factors are about unity in the light, with J/sub 0/ values of about 2 x 10/sup -8/ mA/cm/sup 2/. Interface recombination velocities are as low as a few times 10/sup 5/ cm/sec. CdS depletion layer widths are about 2000 nm in the dark and collapse to about 200 nm under illumination.

  17. Cadmium sulfide/copper sulfide heterojunction cell research by sputter deposition. Quarterly technical progress report, March 1, 1981-June 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, J.A.; Anderson, W.W.; Meakin, J.D.

    1981-08-01

    A second series of hybrid cells with sputter-deposited Cu/sub 2/S layers has been fabricated. An efficiency of about 4 3/4%, without antireflection coating, was achieved for one of the cells. This result approaches the 5 3/4% which was achieved in the first set (different Cu/sub 2/S deposition conditions) and confirms the viability of the sputtering process for this application. Significant progress has been made in fabricating all-sputtered cells with CdS layers deposited by planar magnetron reactive sputtering. Efficiencies of approximately 3%, without antireflection coatings, have been achieved in the as-deposited state for seven cells. Individual cells have yielded a J/sub sc/ of 12 mA/cm/sup 2/, a V/sub oc/ of 0.53V, and a fill factor of 0.72. Taken together these parameters would yield an efficiency of 4 1/2%. A strong coupling is found between the properties of the Cu/sub 2/S and CdS layers. However, the conditions which maximize J/sub sc/, V/sub oc/ and the fill factor do not appear to be mutually exclusive. Reflectance measurements indicate that 30% or more of the incident radiation is being reflected from the front surface of the cells over the wavelength range of the solar spectrum. Thus optimization of the cell parameters with a suitable antireflection coating should yield cell efficiencies of about 6%. Characterization of the junctions formed in the all-sputtered cells under near-optimum deposition conditions indicates that they have remarkable properties in their as-deposited state, being very similar to high performance conventional cells after heat treatment. Junction ideality factors are about unity in the light, with J/sub 0/ values of about 2 x 10/sup -8/ mA/cm/sup 2/. Interface recombination velocities are as low as a few times 10/sup 5/ cm/sec. CdS depletion layer widths are about 2000 nm in the dark and collapse to about 200 nm under illumination.

  18. Progress in Biological Effects and Safety Assessment of Nanomaterials%纳米材料生物效应研究和安全性评价前沿

    Institute of Scientific and Technical Information of China (English)

    刘元方; 陈欣欣; 王海芳

    2011-01-01

    The sustainable development of nanotechnology requires the comprehensive understanding on the safety of nanomaterials. Since 2004, researches on the biological effects and safety evaluation of nanomaterials have been developing rapidly and grown to an interdisciplinary field, nanotoxicology. The safety issue of nanotechnology attracts the attentions of the academic, enterprise, government and public. The authors described the urgency and importance of safety evaluation on nanomaterials, and focused on the latest progress related to nano-product, workplace and environment. In addition, a brief discussion on the standardization in nanotechnology, the nano-ethics and the risk management of nanotechnology was presented.%纳米技术持续、健康的发展要求我们了解纳米材料的安全性.2004年以来,纳米材料生物效应和安全性研究发展迅速,形成一个跨学科的研究领域,并受到政府、学界、企业和社会公众等的广泛关注.文中叙述了纳米材料安全性评估的迫切性和重要意义,重点讨论了该领域的最新发展方向,包括纳米产品、工作场所和环境的安全等,同时简单讨论了纳米标准化、纳米技术风险管理和纳米伦理研究与纳米安全性研究的关系.

  19. Progress report and technical evaluation of the ISCR pilot test conducted at the former CCC/USDA grain storage facility in Centralia, Kansas.

    Energy Technology Data Exchange (ETDEWEB)

    LaFreniere, L. M.; Environmental Science Division

    2009-01-14

    , employing the use of the EHC{reg_sign} treatment materials marketed by Adventus Americas, Inc. (Freeport, Illinois), was recommended. The EHC materials are proprietary mixtures of food-grade organic carbon and zero-valent iron that are injected into the subsurface as a slurry (EHC) or in dissolved form (EHC-A) and subsequently released slowly into the formation. The materials are designed to create highly reducing geochemical conditions in the vadose and saturated zones that foster both thermodynamic and biological reductive dechlorination of carbon tetrachloride.

  20. 多生物效应技术实现方法研究%Research on Measures to Technical Realization of Multi Biological Effects

    Institute of Scientific and Technical Information of China (English)

    刘伟; 曹国忠; 檀润华; 于菲

    2016-01-01

    经亿万年进化的生物已经具备了完善的结构、性状、原理和行为等生物特性,这些特性能为现实多种复杂问题提供有效解决机制。生物为产品设计尤其是仿生设计提供了原始素材,是创新的灵感之源。为充分利用已知的生物原型,进行系统化的产品仿生技术结构设计。建立多生物效应的描述模型,基于灰色聚类提出了生物—技术系统的特征聚类方法;研究生物功能技术实现的类比方法,提出了基于属性的生物-技术功能映射模型及多生物效应驱动的产品原理解构建过程,给出了基于特征聚类的多生物效应技术实现方式;集成上述研究成果形成了面向产品系统设计的多生物效应技术求解模型,并以纽扣电池扣圈装置创新设计为例,验证了本方法的有效性。%After evolution of hundreds of millions years, the organism has obtained features such as the optimal structure, character, principle and behavior to adapt to their living environment. These features provide effective solutions mechanisms to all kinds of complicated problems. Organism provides the raw material for product design, especially the bionic design, which can be the source of inspiration. To make full use of existing human biological prototype to conduct systematically product bionic technology structure design. Descriptive model for multi bionic is established and combining the gray feature cluster method then biology-technology feature cluster method is proposed. Provide the analogy method of biological function, technology function and biological - technology function mapping model and establishment process of products principle solution based on multi bionic based on attribute, proposed implementation of multi biological effects technology based on feature cluster. Combine the above research results to establish the product system design-oriented multi biological effects technology solving model