WorldWideScience

Sample records for bioelectric impedance vectors

  1. Bioelectrical Impedance Vector Analysis and Muscular Fitness in Healthy Men

    Science.gov (United States)

    Rodríguez-Rodríguez, Fernando; Cristi-Montero, Carlos; González-Ruíz, Katherine; Correa-Bautista, Jorge Enrique; Ramírez-Vélez, Robinson

    2016-01-01

    Muscle strength can define the general muscular fitness (MF) measurable through hand-grip strength (HG), which is a factor that relates to the health of people of different ages. In this study we evaluated the muscle strength together with a bioimpedance electric analysis in 223 healthy Colombian adult subjects. The bioelectrical impedance vector analysis (BIVA) was conducted to determine the resistance (R), reactance (Xc) and phase angle (PhA). We classified the subjects into three groups (for tertiles), obtaining lower values of R and Xc in subjects with lower HG, plus a high correlation between PhA and HG. An increase in the level of PhA is associated with a high level of MF in a sample of healthy Latin American adult men. The BIVA’s parameters and PhA are a potentially effective preventive measure to be integrated into routine screening in the clinical setting. PMID:27384579

  2. Bioelectrical Impedance Vector Analysis and Muscular Fitness in Healthy Men

    Directory of Open Access Journals (Sweden)

    Fernando Rodríguez-Rodríguez

    2016-07-01

    Full Text Available Muscle strength can define the general muscular fitness (MF measurable through hand-grip strength (HG, which is a factor that relates to the health of people of different ages. In this study we evaluated the muscle strength together with a bioimpedance electric analysis in 223 healthy Colombian adult subjects. The bioelectrical impedance vector analysis (BIVA was conducted to determine the resistance (R, reactance (Xc and phase angle (PhA. We classified the subjects into three groups (for tertiles, obtaining lower values of R and Xc in subjects with lower HG, plus a high correlation between PhA and HG. An increase in the level of PhA is associated with a high level of MF in a sample of healthy Latin American adult men. The BIVA’s parameters and PhA are a potentially effective preventive measure to be integrated into routine screening in the clinical setting.

  3. BIOELECTRICAL IMPEDANCE VECTOR ANALYSIS IDENTIFIES SARCOPENIA IN NURSING HOME RESIDENTS

    Science.gov (United States)

    Loss of muscle mass and water shifts between body compartments are contributing factors to frailty in the elderly. The body composition changes are especially pronounced in institutionalized elderly. We investigated the ability of single-frequency bioelectrical impedance analysis (BIA) to identify b...

  4. Bioelectrical impedance vector analysis for evaluating zinc supplementation in prepubertal and healthy children

    Directory of Open Access Journals (Sweden)

    Márcia Marília Gomes Dantas

    2015-09-01

    Full Text Available Background: The prevalence of abnormal nutritional status has increased in children and adolescents. Nutritional assessment is important for monitoring the health and nutritional status. Bioelectrical impedance vector analysis (BIVA combines changes in tissue hydration and structure and body composition that can be assessed. Objectives: The objective of this study was to use BIVA to evaluate nutritional status in 60 prepubertal children, aged between 8 and 9 years, supplemented with zinc, to detect possible changes in body composition. Design: We performed a randomized, controlled, triple-blind study. The children were divided into the control group (CG; sorbitol 10%, n=29 or the experimental group (EG; 10 mg Zn/day, n=31, and the duration of the experiment was 3 months. Anthropometric assessments were performed for all of the children. Results: The body mass index-for-age increased after oral zinc supplementation in the EG (p=0.005. BIVA indicated that the CG demonstrated a tendency for dehydration and decreased soft tissue and the EG demonstrated a tendency for increased soft tissue, primarily the fat-free mass. After analyses of BIVA ellipses, we observed that this method could detect improvements in body composition in healthy children supplemented with zinc. Conclusions: These results suggest that BIVA could be an auxiliary method for studying a small population undergoing zinc intervention.

  5. New specific bioelectrical impedance vector reference values for assessing body composition in the Italian-Spanish young adult population.

    Science.gov (United States)

    Ibáñez, Maria E; Mereu, Elena; Buffa, Roberto; Gualdi-Russo, Emanuela; Zaccagni, Luciana; Cossu, Stefano; Rebato, Esther; Marini, Elisabetta

    2015-01-01

    Specific bioelectrical impedance vector analysis (spBIVA) is a recently proposed technique for the analysis of body composition. The aim of this study was to apply spBIVA to a sample of Italian and Spanish young adults and to define the new bioelectrical references for this Western Mediterranean population. A sample of 440 individuals (220 from Italy, 220 from Spain; 213 men, 227 women) aged 18-30 years was considered. Anthropometric (height, weight, relaxed upper arm, waist, and calf girths) and bioelectrical (resistance, reactance; 50 kHz, 800 μA) measurements were taken. In order to verify the need for new references, specific bioelectrical values were compared to the reference values for U.S. adults and Italian elderly by tolerance ellipses and Student's t test. The mean specific bioelectrical values (resistivity, Rsp, and reactivity, Xcsp, Ohm·cm) were: Rsp (332.7 ± 41.7 Ω·cm), Xcsp (44.4 ± 6.8 Ω·cm), Zsp (335.6 ± 41.9 Ω·cm) and phase (7.6 ± 0.8°) in men; Rsp (388.6 ± 60 Ω·cm), Xcsp (43.7 ± 7.5 Ω·cm), Zsp (391.0 ± 60.3 Ω·cm) and phase (6.4 ± 0.7°) in women. Italo-Spanish bioelectrical vectors were mainly distributed (>90%) in the lower part of the tolerance ellipses for U.S. young adults, due to a shorter impedance (P 90%), due to a higher phase (P < 0.001), indicative of higher body cell mass. These population and age-related differences indicate the need for new specific tolerance ellipses that can be used as references for assessing body composition in young adults from Western Mediterranean populations. © 2015 Wiley Periodicals, Inc.

  6. Nutritional status and body composition by bioelectrical impedance vector analysis: A cross sectional study in mild cognitive impairment and Alzheimer’s disease

    Science.gov (United States)

    Pomati, Simone; Maggiore, Laura; Forcella, Marica; Cucumo, Valentina; Ghiretti, Roberta; Grande, Giulia; Muzio, Fulvio; Mariani, Claudio

    2017-01-01

    Aims Analysis of nutritional status and body composition in Alzheimer’s disease (AD) and Mild Cognitive Impairment (MCI). Methods A cross-sectional study was performed in a University-Hospital setting, recruiting 59 patients with AD, 34 subjects with MCI and 58 elderly healthy controls (HC). Nutritional status was assessed by anthropometric parameters (body mass index; calf, upper arm and waist circumferences), Mini Nutritional Assessment (MNA) and body composition by bioelectrical impedance vector analysis (BIVA). Variables were analyzed by analysis of variance and subjects were grouped by cognitive status and gender. Results Sociodemographic variables did not differ among the three groups (AD, MCI and HC), except for females’ age, which was therefore used as covariate in a general linear multivariate model. MNA score was significantly lower in AD patients than in HC; MCI subjects achieved intermediate scores. AD patients (both sexes) had significantly (p<0.05) higher height-normalized impedance values and lower phase angles (body cell mass) compared with HC; a higher ratio of impedance to height was found in men with MCI with respect to HC. With BIVA method, MCI subjects showed a significant displacement on the RXc graph on the right side indicating lower soft tissues (Hotelling’s T2 test: men = 10.6; women = 7.9;p < 0,05) just like AD patients (Hotelling’s T2 test: men = 18.2; women = 16.9; p<0,001). Conclusion Bioelectrical parameters significantly differ from MCI and AD to HC; MCI showed an intermediate pattern between AD and HC. Longitudinal studies are required to investigate if BIVA could reflect early AD-changes in body composition in subjects with MCI. PMID:28187148

  7. Bioelectrical impedance analysis--part I

    DEFF Research Database (Denmark)

    Kyle, Ursula G; Bosaeus, Ingvar; De Lorenzo, Antonio D;

    2004-01-01

    The use of bioelectrical impedance analysis (BIA) is widespread both in healthy subjects and patients, but suffers from a lack of standardized method and quality control procedures. BIA allows the determination of the fat-free mass (FFM) and total body water (TBW) in subjects without significant ...

  8. Application of bioelectrical impedance vector analysis (BIVA in dogs: a preliminary study on gender-related differences

    Directory of Open Access Journals (Sweden)

    Rebecca Ricci

    2010-01-01

    Full Text Available In this preliminary study, BIVA has been performed on 17 healthy Italian Hound dogs, 10 males (M and 7 females (F, in order to verify if gender-related differences can be detected. Only in F higher reactance (Xc values (F: 46.4 vs M: 37.7, P<0.05 and a significant negative correlation (-0.80, P<0.05 between BCS and resistance (R values were detected. 50%, 75% and 95% tolerance ellipses were calculated both in M and F using average Xc and R values standardized for withers height. Probably due to the low number of subjects used in the present study, the variability of the individual vector distribution (F: 79.6 vs M: 53.0Ohm/m, as well as the mean impedance vector lengtht (F: 548.2 vs M: 498.9Ohm/m, were similar in F and M. The gender-related difference in phase angle values was not significant (F: 0.168 vs M: 0.157, P=ns. In conclusion, the use of BIVA in dogs indicated differences between males and females which should be confirmed by a larger number of subjects.

  9. Perioperative bioelectrical impedence analysis in neurosurgery.

    Science.gov (United States)

    El-Dawlatly, Abdelazeem A

    2005-10-01

    The use of bioelectrical impedence (BI) measurement to assess body composition has recently attracted the attention of anesthesiologists. Analysis of BI provides a non-invasive method to quantify fluid distribution in different body compartments. This study was designed to assess whether BI analysis reflects fluid depletion in neurosurgical patients with moderate blood loss. Six adult male patients scheduled for elective craniotomy under general anesthesia were studied. Exclusion criteria included patients with cardio-respiratory disease. BI analysis was performed at three stages, A, day before operation, B, during surgery and C, on the first postoperative day. Total body resistivity was measured by BI analysis with a four-terminal portable impedence analyzer. At each frequency, impedence was calculated as resistance (Rx)2 + reactance (Rc)2. The mean values of total body water (TBW) at stages A, B and C were 39.8 L (range: 33.1-46.7 L), 43.2 L (range: 33.1-66.2 L) and 36.8 L (range: 22.4-36.3 L) respectively with significant differences (P<0.05). The impedence at the three frequencies during stages A, B and C showed significant differences (P<0.05). In conclusion, we have found that in male neurosurgical patients multiple frequency BI measurements has reflected fluid balance perioperatively. Whether this observation remains true for other surgical procedures with massive blood loss, yet to be further investigated.

  10. [Effects of different electrodes on bioelectrical impedance values].

    Science.gov (United States)

    Nakadomo, F; Tanaka, K; Yokoyama, T; Maeda, K

    1990-01-01

    Effects of different electrodes on bioelectrical impedance values measured by the Selco bioelectrical impedance plethysmograph (SIF-881, Japan) were investigated using 8 adult females (age: 35.3 +/- 7.6 yr, Ht: 156.9 +/- 3.8 cm, Wt: 57.1 +/- 9.9 kg, and hydrodensitometrically determined body fat: 29.4 +/- 6.0%). The Lectec MP3000 electrode (Liberty Carton, USA) and the Bipolar electrode (Sanwa, Japan) produced significantly higher impedance values when compared to the Disposable electrode (Adovance, Japan) and the ECG electrode (Nihon Kohden, Japan). The coefficient of variation was significantly lower for the Disposable electrode (0.8%) and the ECG electrode (0.2%) than that for the Lectec MP3000 electrode (2.3%) and the Bipolar electrode (4.9%). In conclusion, the ECG electrode provides higher bioelectrical impedance values with the highest reproducibility in the assessment of human body composition by the bioelectrical impedance plethysmography.

  11. Bioelectrical impedance analysis for an endangered desert fish—Data

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — These data were used to examine the effectiveness of a non-lethal tool (Bioelectrical Impedance Analysis, "BIA") to estimate the physiological condition of...

  12. Bioelectric impedance phase angle in breast carcinoma

    Directory of Open Access Journals (Sweden)

    Ruchi Tyagi

    2014-01-01

    Full Text Available Context: Worldwide breast cancer is the most frequently diagnosed life threatening cancer and the leading cause of death in women. Bioelectric impedance analysis (BIA affords an emerging opportunity to assess prognosis because of its ability to non invasively assess cell and plasma membrane structure and function by means of phase angle. Aims: To compare the phase angle between patients of breast cancer and their matched control with the help of BIA. Settings and Design: After taking clearance from ethical committee, a total of 34 female cases of histologically proven infiltrating ductal breast carcinoma were included from the surgery IPD, department of surgery. Equal numbers of the matched controls were recruited from the friends and relatives of cases. Materials and Methods: Bio Electrical Impedance Analyzer (BIA BODY STAT QUAD SCAN 4000 was used to measure resistance (R and reactance (Xc by recording a voltage drop in applied current. Phase angle is the ratio of reactance to resistance and is a measure of cell vitality. Statistical analysis used: Unpaired "t" test was applied. Results: In control group, the phase angle showed a mean of 5.479 whereas in test group, it showed a mean value of 4.726. The P value showed a significant difference (P < 0.0001. The smaller the phase angle values were higher was the tumor, nodes, metastases (TNM staging. The phase angles differed significantly from the healthy age matched control values. Conclusions: This study demonstrated that phase angle is a strong predictor of severity of breast cancer and differed significantly between the two groups.

  13. Smart Multi-Frequency Bioelectrical Impedance Spectrometer for BIA and BIVA Applications.

    Science.gov (United States)

    Harder, Rene; Diedrich, Andre; Whitfield, Jonathan S; Buchowski, Macie S; Pietsch, John B; Baudenbacher, Franz J

    2016-08-01

    Bioelectrical impedance analysis (BIA) is a noninvasive and commonly used method for the assessment of body composition including body water. We designed a small, portable and wireless multi-frequency impedance spectrometer based on the 12 bit impedance network analyzer AD5933 and a precision wide-band constant current source for tetrapolar whole body impedance measurements. The impedance spectrometer communicates via Bluetooth with mobile devices (smart phone or tablet computer) that provide user interface for patient management and data visualization. The export of patient measurement results into a clinical research database facilitates the aggregation of bioelectrical impedance analysis and biolectrical impedance vector analysis (BIVA) data across multiple subjects and/or studies. The performance of the spectrometer was evaluated using a passive tissue equivalent circuit model as well as a comparison of body composition changes assessed with bioelectrical impedance and dual-energy X-ray absorptiometry (DXA) in healthy volunteers. Our results show an absolute error of 1% for resistance and 5% for reactance measurements in the frequency range of 3 kHz to 150 kHz. A linear regression of BIA and DXA fat mass estimations showed a strong correlation (r(2)=0.985) between measures with a maximum absolute error of 6.5%. The simplicity of BIA measurements, a cost effective design and the simple visual representation of impedance data enables patients to compare and determine body composition during the time course of a specific treatment plan in a clinical or home environment.

  14. Validity of estimating limb muscle volume by bioelectrical impedance.

    Science.gov (United States)

    Miyatani, M; Kanehisa, H; Masuo, Y; Ito, M; Fukunaga, T

    2001-07-01

    The present study aimed to investigate the validity of estimating muscle volume by bioelectrical impedance analysis. Bioelectrical impedance and series cross-sectional images of the forearm, upper arm, lower leg, and thigh on the right side were determined in 22 healthy young adult men using a specially designed bioelectrical impedance acquisition system and magnetic resonance imaging (MRI) method, respectively. The impedance index (L(2)/Z) for every segment, calculated as the ratio of segment length squared to the impedance, was significantly correlated to the muscle volume measured by MRI, with r = 0.902-0.976 (P estimation was 38.4 cm(3) for the forearm, 40.9 cm(3) for the upper arm, 107.2 cm(3) for the lower leg, and 362.3 cm(3) for the thigh. Moreover, isometric torque developed in elbow flexion or extension and knee flexion or extension was significantly correlated to the L(2)/Z values of the upper arm and thigh, respectively, with correlation coefficients of 0.770-0.937 (P knee flexors or extensors. Thus the present study indicates that bioelectrical impedance analysis may be useful to predict the muscle volume and to investigate possible relations between muscle size and strength capability in a limited segment of the upper and lower limbs.

  15. Anisotropic bioelectrical impedance determination of subcutaneous fat thickness

    Science.gov (United States)

    Hernández-Becerra, P. A. I.; Delgadillo-Holtfort, I.; Balleza-Ordaz, M.; Huerta-Franco, M. R.; Vargas-Luna, M.

    2014-11-01

    Preliminary results have shown that bioelectrical impedance measurements performed on different parts of the human body strongly depend upon the subcutaneous fat of the considered region. In this work, a method for the determination of subcutaneous fat thickness is explored. Within this method the measurement of the bioelectrical impedance response of the fat-muscle system, both along the direction defined by the muscle fibers and along the corresponding perpendicular direction, are performed. Measurements have been carried out on human female and male subjects of ages around 25 years old at the region of the biceps. Correlation has been performed with skinfold caliper measurements.

  16. Bioelectrical Impedance Methods for Noninvasive Health Monitoring: A Review

    Directory of Open Access Journals (Sweden)

    Tushar Kanti Bera

    2014-01-01

    Full Text Available Under the alternating electrical excitation, biological tissues produce a complex electrical impedance which depends on tissue composition, structures, health status, and applied signal frequency, and hence the bioelectrical impedance methods can be utilized for noninvasive tissue characterization. As the impedance responses of these tissue parameters vary with frequencies of the applied signal, the impedance analysis conducted over a wide frequency band provides more information about the tissue interiors which help us to better understand the biological tissues anatomy, physiology, and pathology. Over past few decades, a number of impedance based noninvasive tissue characterization techniques such as bioelectrical impedance analysis (BIA, electrical impedance spectroscopy (EIS, electrical impedance plethysmography (IPG, impedance cardiography (ICG, and electrical impedance tomography (EIT have been proposed and a lot of research works have been conducted on these methods for noninvasive tissue characterization and disease diagnosis. In this paper BIA, EIS, IPG, ICG, and EIT techniques and their applications in different fields have been reviewed and technical perspective of these impedance methods has been presented. The working principles, applications, merits, and demerits of these methods has been discussed in detail along with their other technical issues followed by present status and future trends.

  17. Experimental verification of depolarization effects in bioelectrical impedance measurement.

    Science.gov (United States)

    Chen, Xiaoyan; Lv, Xinqiang; Du, Meng

    2014-01-01

    The electrode polarization effects on bioelectrical impedance measurement at low-frequency cannot be ignored. In this paper, the bioelectrical data of mice livers are measured to specify the polarization effects on the bio-impedance measurement data. We firstly introduce the measurement system and methodology. Using the depolarization method, the corrected results are obtained. Besides, the specific effects of electrode polarization on bio-impedance measurement results are investigated using comparative analysis of the previous and posterior correction results from dielectric spectroscopy, Cole-Cole plot, conductivity and spectroscopy of dissipation tangent. Experimental results show that electrode polarization has a significant influence on the characteristic parameters of mouse liver tissues. To be specific, we see a low-frequency limit resistance R0 increase by 19.29%, a reactance peak XP increase by 8.50%, a low-frequency limit conductivity Kl decrease by 17.65% and a dissipation peak tangent decrease by 160%.

  18. Bioelectrical impedance analysis of bovine milk fat

    Science.gov (United States)

    Veiga, E. A.; Bertemes-Filho, P.

    2012-12-01

    Three samples of 250ml at home temperature of 20°C were obtained from whole, low fat and fat free bovine UHT milk. They were analysed by measuring both impedance spectra and dc conductivity in order to establish the relationship between samples related to fat content. An impedance measuring system was developed, which is based on digital oscilloscope, a current source and a FPGA. Data was measured by the oscilloscope in the frequency 1 kHz to 100 kHz. It was showed that there is approximately 7.9% difference in the conductivity between whole and low fat milk whereas 15.9% between low fat and free fat one. The change of fatness in the milk can be significantly sensed by both impedance spectra measurements and dc conductivity. This result might be useful for detecting fat content of milk in a very simple way and also may help the development of sensors for measuring milk quality, as for example the detection of mastitis.

  19. Bioelectrical impedance analysis for bovine milk: Preliminary results

    Science.gov (United States)

    Bertemes-Filho, P.; Valicheski, R.; Pereira, R. M.; Paterno, A. S.

    2010-04-01

    This work reports the investigation and analysis of bovine milk quality by using biological impedance measurements using electrical impedance spectroscopy (EIS). The samples were distinguished by a first chemical analysis using Fourier transform midinfrared spectroscopy (FTIR) and flow citometry. A set of milk samples (100ml each) obtained from 17 different cows in lactation with and without mastitis were analyzed with the proposed technique using EIS. The samples were adulterated by adding distilled water and hydrogen peroxide in a controlled manner. FTIR spectroscopy and flow cytometry were performed, and impedance measurements were made in a frequency range from 500Hz up to 1MHz with an implemented EIS system. The system's phase shift was compensated by measuring saline solutions. It was possible to show that the results obtained with the Bioelectrical Impedance Analysis (BIA) technique may detect changes in the milk caused by mastitis and the presence of water and hydrogen peroxide in the bovine milk.

  20. Muscle development in healthy children evaluated by bioelectrical impedance analysis.

    Science.gov (United States)

    Uchiyama, Tomoka; Nakayama, Takahiro; Kuru, Satoshi

    2017-02-01

    This study aimed to use bioelectrical impedance analysis (BIA) to generate a new muscle density index (MDI), the MDI_BIA, to evaluate muscle development, and to demonstrate the changes that occur in the BIA-based muscle cross-sectional area index (MCAI_BIA) that accompany growth. We also sought to determine the traceability of chronological changes in the MDI_BIA and MCAI_BIA. Healthy children (n=112) aged 8.68±3.16years (0.33-14.00years) underwent bioelectrical impedance (BI) measurements of their upper arms, thighs, and lower legs. The MDI_BIA and MCAI_BIA were calculated, and cross-sectional investigations were conducted into the changes in these indices that accompanied growth. Data collected after 1.10±0.08years from 45 participants determined the traceability of the chronological changes in the MDI_BIA and MCAI_BIA. The MDI_BIA and MCAI_BIA were significantly positively correlated with age and height at all locations (Pmuscles from different perspectives. Except for the upper arm MDI_BIA, both indices at all locations regardless of age, showed significant chronological increases after an average period of 1.10years. The MDI_BIA and MCAI_BIA were significantly correlated with age and height in healthy children, and they showed significant chronological increases. Hence, these indices could be used to represent muscle development and muscle mass increases. BIA is non-invasive, convenient, and economical and it may be useful in evaluating muscle development and muscle cross-sectional areas in children. Copyright © 2016 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

  1. Bioelectrical impedance analysis for severe stroke patients with upper extremity hemiplegia

    Science.gov (United States)

    Yoo, Chanuk; Kim, Jaehyung; Yang, Yeongae; Lee, Jinsu; Jeon, Gyerok

    2016-01-01

    [Purpose] This study is to analyze bioimpedance parameters and occupational assessment for severe stroke patients with upper extremity hemiplegia. [Subjects and Methods] Experimental subjects were 20 hemiplegic stroke patients receiving rehabilitation therapy between November to October, 2015. Prediction marker (PM), and phase angle (θ), a nd characteristic frequency (fc) were measured using bioelectrical impedance spectroscopy (MultiScan 5000). Bioelectrical impedance vector analysis (BIVA) was also obtained from the bioimpedance data. Then, these values were compared with occupational assessment tools. [Results] A significant differences in PM, θ, fc, and BIVA were observed between paretic region and non-paretic region of 5 severe stroke patients. These results were in good agreement with occupational assessment (pinch and hand grip strength, and ADL by MBI). [Conclusion] There were significant differences in impedance parameters between paretic region and non-paretic region of 5 severe stroke patients with upper extremity hemiplegia. Thus, the BIA could be useful tool for evaluating hemiplegic stroke patients receiving the rehabilitation therapy in the clinical application. PMID:27821919

  2. Feasibility of bioelectrical impedance analysis in persons with severe intellectual and visual disabilities

    NARCIS (Netherlands)

    Havinga-Top, A. M.; Waninge, A.; van der Schans, C. P.; Jager-Wittenaar, H.

    2015-01-01

    Background: Body composition measurements provide important information about physical fitness and nutritional status. People with severe intellectual and visual disabilities (SIVD) have an increased risk for altered body composition. Bioelectrical impedance analysis (BIA) has been evidenced as a

  3. A practical guide to bioelectrical impedance analysis using the example of chronic obstructive pulmonary disease

    Directory of Open Access Journals (Sweden)

    Mattiucci-Guehlke Muriel

    2011-04-01

    Full Text Available Abstract Bioelectrical impedance analysis (BIA is a simple, inexpensive, quick and non-invasive technique for measuring body composition. The clinical benefit of BIA can be further enhanced by combining it with bioelectrical impedance vector analysis (BIVA. However, there is a substantial lack of information on the practical aspects of BIA/BIVA for those primarily interested in learning how to use and interpret this method in practice. The purpose of this article is to provide some guidance on the use of BIA/BIVA with special attention to practical considerations. This report reflects the authors' practical experience with the use of single-frequency BIA in combination with BIVA, particularly in COPD patients. First, the method and principles of BIA/BIVA are briefly described. Then, a practice-oriented approach to the interpretation and analysis of characteristic examples of altered nutritional and fluid status as seen with BIA/BIVA in COPD patients (e.g. malnutrition in obese and underweight patients with COPD, water retention is presented. As our examples show BIA/BIVA is an attractive and easy-to-learn tool for quick nutritional assessment and is therefore of great clinical benefit in daily practice.

  4. Is bioelectrical impedance accurate for use in large epidemiological studies?

    Directory of Open Access Journals (Sweden)

    Merchant Anwar T

    2008-09-01

    Full Text Available Abstract Percentage of body fat is strongly associated with the risk of several chronic diseases but its accurate measurement is difficult. Bioelectrical impedance analysis (BIA is a relatively simple, quick and non-invasive technique, to measure body composition. It measures body fat accurately in controlled clinical conditions but its performance in the field is inconsistent. In large epidemiologic studies simpler surrogate techniques such as body mass index (BMI, waist circumference, and waist-hip ratio are frequently used instead of BIA to measure body fatness. We reviewed the rationale, theory, and technique of recently developed systems such as foot (or hand-to-foot BIA measurement, and the elements that could influence its results in large epidemiologic studies. BIA results are influenced by factors such as the environment, ethnicity, phase of menstrual cycle, and underlying medical conditions. We concluded that BIA measurements validated for specific ethnic groups, populations and conditions can accurately measure body fat in those populations, but not others and suggest that for large epdiemiological studies with diverse populations BIA may not be the appropriate choice for body composition measurement unless specific calibration equations are developed for different groups participating in the study.

  5. Bioelectrics

    CERN Document Server

    Heller, Richard

    2017-01-01

    This book focuses on bioelectrics, a new multidisciplinary field encompassing engineering and biology with applications to the medical, environmental, food, energy, and biotechnological fields. At present, 15 universities and institutes in Japan, the USA and the EU comprise the International Consortium of Bioelectrics, intended to advance this novel and important research field. This book will serve as an introductory resource for young scientists and also as a textbook for use by both undergraduate and graduate students – the world’s first such work solely devoted to bioelectrics.

  6. The use of bioelectrical impedance analysis for body composition in epidemiological studies

    DEFF Research Database (Denmark)

    Böhm, A; Heitmann, B L

    2013-01-01

    BACKGROUND/OBJECTIVES: Bioelectrical impedance analysis (BIA) is a relatively simple, inexpensive and non-invasive technique to measure body composition and is therefore suitable in field studies and larger surveys. SUBJECTS/METHODS: We performed an overview of BIA-derived body fat percentages (BF...

  7. Impact of hemodialysis on dual X-ray absorptiometry, bioelectrical impedance measurements, and anthropometry

    DEFF Research Database (Denmark)

    Abrahamsen, Bo; Hansen, T B; Høgsberg, I M;

    1996-01-01

    ), bioelectrical impedance analysis (BIA), and simple anthropometry in 19 patients (9 women and 10 men, mean age 46 y) before and after hemodialysis, removing 0.9-4.3 L (x: 2.8L) of ultrafiltrate. The reduction in fat-free mass (FFM) measured by DXA was highly correlated with the ultrafiltrate, as determined...

  8. A comparison of skinfolds and leg-to-leg bioelectrical impedance for the assessment of body composition in children

    Science.gov (United States)

    Goss, Fredric; Robertson, Robert; Williams, Allison; Sward, Kathy; Abt, Kristi; Ladewig, Melissa; Timmer, Jeffrey; Dixon, Curt

    2003-01-01

    Background This field-based investigation examined the congruence between skinfolds and bioelectrical impedance in assessing body composition in children. Methods Subjects were 162 female and 160 male children 10–15 years of age. Skinfold measures obtained at the triceps and medial calf and a leg-to-leg bioelectrical impedance system were used to determine percent fat using child-specific equations. Pearson product moment correlations were performed on the percent fat values obtained using skinfolds and bioelectric impedance for the entire data set. Separate correlations were also conducted on gender and age/gender subsets. Dependent t tests were used to compare the two techniques. Results Percent fat did not differ between skinfolds and bioelectrical impedance for the total subject pool. Bioelectrical impedance overestimated percent fat in girls by 2.6% and underestimated percent fat in boys by 1.7% (p < 0.01). Correlations between skinfolds and bioelectrical impedance ranged from r = 0.51 to r = 0.90. Conclusions Leg-to-leg bioelectrical impedance may be a viable alternative field assessment technique that is comparable to skinfolds. The small differences in percent fat between the two techniques may have limited practical significance in school-based health-fitness settings. PMID:14498990

  9. Assessment of body composition with bioelectrical impedance analysis in pregnant women with hyperemesis gravidarum before and after treatment.

    Science.gov (United States)

    Tazegül Pekin, A; Yılmaz, S A; Kerimoğlu, Ö Seçilmiş; Çelik, G; Doğan, N U; Beyhekim, H; Çelik, Ç

    2015-01-01

    More than half of pregnant women suffer from nausea and vomiting, in 0.5-1% of the pregnant women, if nausea and vomiting are severe and persistent, condition can progress to hyperemesis. We evaluated the fluid volume parameters in pregnant women with hyperemesis gravidarum, before and after treatment using the bioelectrical impedance vectors. A total of 70 pregnant women who had weight loss exceeding 5% of pre-pregnancy body weight were recruited for the study in the first trimester. The measurement of multi-frequency bioelectrical impedance analysis parameters was performed on the day of hospitalisation before any treatment and after treatment at 24 h and 72 h with the same procedure. Total body water, extracellular water, intracellular water, and fat-free mass index increased after treatment at 24 h (P treatment (11.3 ± 2.1 at enrolment, 5.1 ± 1.4 at 24 h and 4.3 ± 1.1 at 72 h) (P hyperemesis gravidarum, significant body composition changes occur and fluid replacement therapy performed during a short period of time, such as 24 h, provides improvement in body composition.

  10. Use of bioelectrical impedance analysis to determine body composition changes in HIV-associated wasting.

    Science.gov (United States)

    Klauke, Stephan; Fischer, Harald; Rieger, Armin; Frühauf, Lukas; Staszewski, Schlomo; Althoff, Peter-Henning; Helm, Eilke Brigitte

    2005-04-01

    AIDS wasting syndrome results in loss of lean body mass and body cell mass. This 12-week, open-label study used bioelectrical impedance analysis to measure body composition changes in 24 patients with AIDS wasting syndrome receiving recombinant human growth hormone (r-hGH). The primary endpoint was percentage monthly change in body weight before/after r-hGH. Secondary endpoints included change from baseline in body composition (bioelectrical impedance analysis), isometric strength and CD4+ count. Twenty patients completed the study: r-hGH resulted in mean weight gains (+2.7%, P = 0.146), and significant increases in mean body cell mass (+8.0%, P = 0.0211), lean body mass (+4.8%, P = 0.0373) and water (+5.5%, P r-hGH was generally well tolerated; the most frequent adverse events were fever (7.3%) and diarrhoea (6.3%). Thus, bioelectrical impedance analysis can detect improved body cell mass independent of changes in body weight resulting from r-hGH treatment in patients with AIDS wasting syndrome.

  11. Bioelectrical impedance analysis for the prediction of hot carcass weight in buffalo calf

    Directory of Open Access Journals (Sweden)

    Leopoldo Iannuzzi

    2010-01-01

    Full Text Available Twenty young buffalo male calves were fed ad libitum with a total mix ration and with vitamin-mineral integration for 14 months. Seven days before slaughter, the animals were weighed and bioelectrical impedance measurements were collected in live animals. Physical and chemical characteristics were assessed on the Longissimus dorsi muscle after slaughter. Correlations and regression equations were calculated to determine the possible use of bioelectrical impedance for evaluating hot carcass weight. Bioelectrical impedance analysis at different frequencies, simple correlation and analysis of regression were examined for all the data collected, supporting the possibility of hot carcass weight prediction with equation at multifrequency. The results show that, probably due to the variability in animal live weight, the distribution of the colour parameters was not normally distributed. Moreover, using different frequencies of resistance and reactance, hot carcass weight in buffalo may be predicted with the following equation: Y=98.47–8.84(Rs100KHz+4.41(Rs1000 KHz-116.27(Xc5 KHz+51.04(Xc50 KHz+20.30(Xc100 KHz-33.92(Xc500 KHz+9.01(Xc1000 KHz±ε (Adjusted R Square value of .907 and SE of 5.728 However, further studies are required to improve the technique also in buffalo, after standardization of the method.

  12. Standardisation of bioelectrical impedance analysis for the estimation of body composition in healthy paediatric populations

    DEFF Research Database (Denmark)

    Brantlov, Steven; Jødal, Lars; Lange, Aksel

    2017-01-01

    BACKGROUND: Bioelectrical impedance analysis (BIA) requires a high degree of standardisation in order to ensure valid and reproducible impedance measurements. The overall aim of this review was to study the degree to which BIA papers conducted in healthy paediatric populations (aged 0-17 years......) were standardised. METHODS: Literature was identified on the basis of a systematic search of internationally-recognised electronic databases and hand searching of the reference lists of the included papers in order to identify additional relevant papers. The review was limited to lead-type BIA devices...

  13. Body fat measurement by bioelectrical impedance and air displacement plethysmography: a cross-validation study to design bioelectrical impedance equations in Mexican adults

    Directory of Open Access Journals (Sweden)

    Valencia Mauro E

    2007-08-01

    Full Text Available Abstract Background The study of body composition in specific populations by techniques such as bio-impedance analysis (BIA requires validation based on standard reference methods. The aim of this study was to develop and cross-validate a predictive equation for bioelectrical impedance using air displacement plethysmography (ADP as standard method to measure body composition in Mexican adult men and women. Methods This study included 155 male and female subjects from northern Mexico, 20–50 years of age, from low, middle, and upper income levels. Body composition was measured by ADP. Body weight (BW, kg and height (Ht, cm were obtained by standard anthropometric techniques. Resistance, R (ohms and reactance, Xc (ohms were also measured. A random-split method was used to obtain two samples: one was used to derive the equation by the "all possible regressions" procedure and was cross-validated in the other sample to test predicted versus measured values of fat-free mass (FFM. Results and Discussion The final model was: FFM (kg = 0.7374 * (Ht2 /R + 0.1763 * (BW - 0.1773 * (Age + 0.1198 * (Xc - 2.4658. R2 was 0.97; the square root of the mean square error (SRMSE was 1.99 kg, and the pure error (PE was 2.96. There was no difference between FFM predicted by the new equation (48.57 ± 10.9 kg and that measured by ADP (48.43 ± 11.3 kg. The new equation did not differ from the line of identity, had a high R2 and a low SRMSE, and showed no significant bias (0.87 ± 2.84 kg. Conclusion The new bioelectrical impedance equation based on the two-compartment model (2C was accurate, precise, and free of bias. This equation can be used to assess body composition and nutritional status in populations similar in anthropometric and physical characteristics to this sample.

  14. NOTE: Spatial dependence of the phase in localized bioelectrical impedance analysis

    Science.gov (United States)

    Shiffman, C. A.; Aaron, R.; Altman, A.

    2001-04-01

    The variety of phase functions, θ(z) = arctan X(z)/R(z), observed earlier on the thighs of healthy and seriously ill subjects via localized bioelectrical impedance analysis, can be represented by a model which combines realistic thigh shapes with homogeneous, axially symmetric conductivity tensors. While quantitative results depend sensitively on the way current is injected, it appears to be generally true that dθ/dz φz (and vice versa), where φr and φz are the phases of the radial and longitudinal conductivity components.

  15. Evaluation of segmental body composition by gender in obese children using bioelectric impedance analysis method

    Directory of Open Access Journals (Sweden)

    İhsan Çetin

    2015-12-01

    Full Text Available Objective: In this study, it was aimed to evaluate segmental body composition of children diagnosed with obesity using bioelectrical impedance analysis method in terms of different gender. Methods: 48 children, aged between 6-15 years, 21 of whom were boys while 27 were girls, diagnosed with obesity in Erciyes University Medical Faculty Department of Pediatric Endocrinology Outpatient Clinic were included in our study from April to June in 2011. Those over 95 percentile were defined as obese group. Tanita BC-418 device was used to analyze the body composition. Results: As a result of bioelectrical impedance analysis, lean body mass and body muscle mass were found to be statistically significantly higher in obese girls compared with obese boys. However, lean mass of the left arm, left leg muscle mass and basal metabolic rate were found to be statistically significantly lower in obese girls compared with obese boys. Conclusion: Consequently, it may be suggest that segmental analysis, where gender differences are taken into account, can provide proper exercise pattern and healthy way of weight loss in children for prevention of obesity and associated diseases including obesity and type 2 diabetics and cardiovascular diseases.

  16. Measurement of lean body mass using bioelectrical impedance analysis: a consideration of the pros and cons.

    Science.gov (United States)

    Sergi, Giuseppe; De Rui, Marina; Stubbs, Brendon; Veronese, Nicola; Manzato, Enzo

    2016-08-27

    The assessment of body composition has important applications in the evaluation of nutritional status and estimating potential health risks. Bioelectrical impedance analysis (BIA) is a valid method for the assessment of body composition. BIA is an alternative to more invasive and expensive methods like dual-energy X-ray absorptiometry, computerized tomography, and magnetic resonance imaging. Bioelectrical impedance analysis is an easy-to-use and low-cost method for the estimation of fat-free mass (FFM) in physiological and pathological conditions. The reliability of BIA measurements is influenced by various factors related to the instrument itself, including electrodes, operator, subject, and environment. BIA assumptions beyond its use for body composition are the human body is empirically composed of cylinders, FFM contains virtually all the water and conducting electrolytes in the body, and its hydration is constant. FFM can be predicted by BIA through equations developed using reference methods. Several BIA prediction equations exist for the estimation of FFM, skeletal muscle mass (SMM), or appendicular SMM. The BIA prediction models differ according to the characteristics of the sample in which they have been derived and validated in addition to the parameters included in the multiple regression analysis. In choosing BIA equations, it is important to consider the characteristics of the sample in which it has been developed and validated, since, for example, age- and ethnicity-related differences could sensitively affect BIA estimates.

  17. Bioelectrical impedance vectorial analysis and nutritional status of older women according. 10.5007/1980-0037.2011v13n6p415

    Directory of Open Access Journals (Sweden)

    Sandra Maria Lima Ribeiro

    2011-11-01

    Full Text Available The objective of the present study was to compare and discuss the nutritional status of older women according to different categories of BMI. Additionally, the study was aimed at introducing the bioelectrical impedance vector analysis (BIVA as a tool to assess the nutritional status. Thirty-two women (60 years or older, physically independent, and with moderate level of physical activity were divided into three groups according toBMI classification: G1 (BMI28 Kg/ m2. The following variables were analyzed as indicators of nutritional status: body mass and height to calculate BMI, waist circumference (WC, hip circumference (HC, waisthipratio (WHR, bioelectrical impedance (BIVA, resting energy expenditure (REE, biochemical markers of nutritional status (glucose, total cholesterol, and fractions, IGF-1, and leptin. The groups were compared using ANOVA and the Hotelling’s T 2 test for vector analysis. The main findings based on vector displacement showed lower reactance and higher resistance in G1. G3 showed the highest values of CC and leptin, and also lower REE. Therefore, higher BMI suggested at the same time higher cell mass and higher risk of developing chronic diseases. In turn, lower BMI values suggested reduced fat-free body mass. These results confirm the search for specific classification of BMI for the elderly and suggest the BIVA as a viable alternative in physical and nutritional assessment.

  18. Comparison of Bioelectrical Impedance and Skinfolds with Hydrodensitometry in the Assessment of Body Composition in Healthy Young Adults

    Science.gov (United States)

    Rutherford, W. J.; Diemer, Gary A.; Scott, Eric D.

    2011-01-01

    Bioelectrical impedance analysis (BIA) is a widely used method for estimating body composition, yet issues concerning its validity persist in the literature. The purpose of this study was to validate percentage of body fat (BF) values estimated from BIA and skinfold (SF) with those obtained from hydrodensitometry (HD). Percent BF values measured…

  19. Prediction of extracellular water and total body water by multifrequency bio-electrical impedance in a Southeast Asian population

    NARCIS (Netherlands)

    Guricci, S.; Hatriyanti, Y.; Hautvast, J.G.A.J.; Deurenberg, P.

    1999-01-01

    Three different adult Indonesian population groups living on Sumatra (Palembang), Java (Depok) and Sulawesi (Makale) participated in a study on body composition. Body weight, body height and multifrequency bioelectrical impedance (1, 5, 50 and 100 kHz) were measured and in addition total body water

  20. Validity of bioelectrical impedance analysis to assess fat-free mass in head and neck cancer patients: an exploratory study

    NARCIS (Netherlands)

    Jager-Wittenaar, Harriët; Dijkstra, Pieter U.; Earthman, Carrie P.; Krijnen, Wim P.; Langendijk, Johannes A.; Laan, Bernard F.A. M. van der; Pruim, Jan; Roodenburg, Jan L.N.

    2013-01-01

    Bioelectrical impedance analysis (BIA) may be used to assess fet free mass (FFM) with reasonable validity based on mean-level comparisons, but differences between BIA and DXA may vary by about 4 kg in an individual patient. These results require confirmation in a larger sample of HNC patients. (Head

  1. Validation of bioelectrical-impedance analysis as a measurement of change in body composition in obesity

    Energy Technology Data Exchange (ETDEWEB)

    Kushner, R.F.; Kunigk, A.; Alspaugh, M.; Andronis, P.T.; Leitch, C.A.; Schoeller, D.A. (Univ. of Chicago, IL (USA))

    1990-08-01

    The bioelectrical-impedance-analysis (BIA) method accurately measures body composition in weight-stable subjects. This study validates the use of BIA to measure change in body composition. Twelve obese females underwent weight loss at a mean rate of 1.16 kg/wk. Body composition was measured by deuterium oxide dilution (D2O), BIA, and skinfold anthropometry (SFA) at baseline and at 5% decrements in weight. Highly significant correlations were obtained between D2O and BIA (r = 0.971) and between D2O and SFA (r = 0.932). Overall, BIA predicted change in fat-free mass with greater accuracy (to 0.4 kg) and precision (+/- 1.28 kg) than did anthropometry (to 0.8 kg and +/- 2.58 kg, respectively). We conclude that BIA is a useful clinical method for measuring change in body composition.

  2. Does bioelectrical impedance analysis accurately estimate the condition of threatened and endangered desert fish species?

    Science.gov (United States)

    Dibble, Kimberly L.; Yard, Micheal D.; Ward, David L.; Yackulic, Charles B.

    2017-01-01

    Bioelectrical impedance analysis (BIA) is a nonlethal tool with which to estimate the physiological condition of animals that has potential value in research on endangered species. However, the effectiveness of BIA varies by species, the methodology continues to be refined, and incidental mortality rates are unknown. Under laboratory conditions we tested the value of using BIA in addition to morphological measurements such as total length and wet mass to estimate proximate composition (lipid, protein, ash, water, dry mass, energy density) in the endangered Humpback Chub Gila cypha and Bonytail G. elegans and the species of concern Roundtail Chub G. robusta and conducted separate trials to estimate the mortality rates of these sensitive species. Although Humpback and Roundtail Chub exhibited no or low mortality in response to taking BIA measurements versus handling for length and wet-mass measurements, Bonytails exhibited 14% and 47% mortality in the BIA and handling experiments, respectively, indicating that survival following stress is species specific. Derived BIA measurements were included in the best models for most proximate components; however, the added value of BIA as a predictor was marginal except in the absence of accurate wet-mass data. Bioelectrical impedance analysis improved the R2 of the best percentage-based models by no more than 4% relative to models based on morphology. Simulated field conditions indicated that BIA models became increasingly better than morphometric models at estimating proximate composition as the observation error around wet-mass measurements increased. However, since the overall proportion of variance explained by percentage-based models was low and BIA was mostly a redundant predictor, we caution against the use of BIA in field applications for these sensitive fish species.

  3. Prediction of body composition of Iberian pigs by means bioelectrical impedance.

    Science.gov (United States)

    Daza, A; Mateos, A; Ovejero, I; Bote, C J López

    2006-01-01

    Twelve barrow Iberian pigs with an average weight at slaughter of 109.2kg were used to evaluate bioelectrical impedance procedures to predict the body composition of live pigs. Twelve hours before slaughter pigs were weighed, and a four-terminal body composition analyser (Model BIA-101, RJL Systems, Detroit, MI) was utilized to determine resistance (R(s) in Ω) and reactance (X(c) in Ω). The length values (L in cm) were measured between detector electrodes with a flexible steel tape. Twenty four hours after slaughter the left side of each carcass was separated using a scalpel into fat, lean, bone and skin. Multiple regression equations for estimating lean, fat, bone and skin amounts and lean, fat, bone and skin proportions with respect to slaughter weight were calculated. The live weight (LW) and L independent variables predicted 85.3% and 64.3% of the variability of the lean amount and lean proportion, respectively. The LW, X(c) and L variables accounted for 96% and 91.6% of the variation in fat quantity and fat proportion, respectively. The LW and R(s) accounted for 58.9% of the variation in bone amount, and the same variables predict 79.1% of the variability of bone percentage. The R(s) and L variables explained 68% of the variability of skin quantity and LW, R(s) and X(c) predicted 83.1% of the variation of skin proportion. Results from this experiment indicate that bioelectrical impedance may be of interest for body composition prediction of live Iberian pigs.

  4. Lipid and moisture content modeling of amphidromous Dolly Varden using bioelectrical impedance analysis

    Science.gov (United States)

    Stolarski, J.T.; Margraf, F.J.; Carlson, J.G.; Sutton, T.M.

    2014-01-01

    The physiological well-being or condition of fish is most commonly estimated from aspects of individual morphology. However, these metrics may be only weakly correlated with nutritional reserves stored as lipid, the primary form of accumulated energy in fish. We constructed and evaluated bioelectrical impedance analysis (BIA) models as an alternative method of assessing condition in amphidromous Dolly Varden Salvelinus malma collected from nearshore estuarine and lotic habitats of the Alaskan Arctic. Data on electrical resistance and reactance were collected from the lateral and ventral surfaces of 192 fish, and whole-body percent lipid and moisture content were determined using standard laboratory methods. Significant inverse relationships between temperature and resistance and reactance prompted the standardization of these data to a constant temperature using corrective equations developed herein. No significant differences in resistance or reactance were detected among spawning and nonspawning females after accounting for covariates, suggesting that electrical pathways do not intersect the gonads. Best-fit BIA models incorporating electrical variables calculated from the lateral and ventral surfaces produced the strongest associations between observed and model-predicted estimates of proximate content. These models explained between 6% and 20% more of the variability in laboratory-derived estimates of proximate content than models developed from single-surface BIA data and 32% more than models containing only length and weight data. While additional research is required to address the potential effects of methodological variation, bioelectrical impedance analysis shows promise as a way to provide high-quality, minimally invasive estimates of Dolly Varden lipid or moisture content in the field with only small increases in handling time.

  5. Evaluation of body composition in COPD patients using multifrequency bioelectrical impedance analysis

    Science.gov (United States)

    de Blasio, Francesca; de Blasio, Francesco; Miracco Berlingieri, Giulia; Bianco, Andrea; La Greca, Marta; Franssen, Frits M E; Scalfi, Luca

    2016-01-01

    Background Multifrequency bioelectrical impedance analysis (MF-BIA) is a technique that measures body impedance (Z) at different frequencies (5, 10, 50, 100, and 250 kHz). Body composition may be estimated using empirical equations, which include BIA variables or, alternatively, raw BIA data may provide direct information on water distribution and muscle quality. Objectives To compare raw MF-BIA data between COPD patients and controls and to study their relationship with respiratory and functional parameters in COPD patients. Methods MF-BIA was performed (Human Im-Touch analyzer) in 212 COPD patients and 115 age- and BMI-matched controls. Fat-free mass (FFM) and fat mass were estimated from BIA data, and low- to high-frequency (5 kHz/250 kHz) impedance ratio was calculated. Physical fitness, lung function and respiratory muscle strength were also assessed in COPD patients. Results After adjusting for age, weight, and body mass index, FFM and the 5/250 impedance ratio were lower in COPD patients (P<0.001) and were negatively affected by disease severity. In both male and female patients, the 5/250 impedance ratio was significantly correlated mainly with age (r=−0.316 and r=−0.346, respectively). Patients with a 5/250 impedance ratio below median value had lower handgrip strength (P<0.001), 6-minute walk distance (P<0.005), respiratory muscle strength (P<0.005), forced expiratory volume in 1 second (P<0.05) and vital capacity (P<0.005). Finally, the 5/250 impedance ratio was reduced (P<0.05) in patients with Global Initiative for Chronic Obstructive Lung Disease (GOLD) III and IV (compared to those with GOLD I and II) or a BODE index between 6 and 10 points (compared to those with BODE index between 1 and 5 points). Conclusion MF-BIA may be a useful tool for assessing body composition and nutritional status in COPD patients. In particular, the impedance ratio could give valuable information on cellular integrity and muscle quality.

  6. Smartphone-Based Bioelectrical Impedance Analysis Devices for Daily Obesity Management

    Directory of Open Access Journals (Sweden)

    Ahyoung Choi

    2015-09-01

    Full Text Available Current bioelectric impedance analysis (BIA systems are often large, cumbersome devices which require strict electrode placement on the user, thus inhibiting mobile capabilities. In this work, we developed a handheld BIA device that measures impedance from multiple frequencies (5 kHz~200 kHz with four contact electrodes and evaluated the BIA device against standard body composition analysis systems: a dual-energy X-ray absorptiometry (DXA system (GE Lunar Prodigy, GE Healthcare, Buckinghamshire, UK and a whole-body BIA system (InBody S10, InBody, Co. Ltd, Seoul, Korea. In the study, 568 healthy participants, varying widely in body mass index, age, and gender, were recruited at two research centers: the Samsung Medical Center (SMC in South Korea and the Pennington Biomedical Research Center (PBRC in the United States. From the measured impedance data, we analyzed individual body fat and skeletal muscle mass by applying linear regression analysis against target reference data. Results indicated strong correlations of impedance measurements between the prototype pathways and corresponding InBody S10 electrical pathways (R = 0.93, p < 0.0001. Additionally, body fat estimates from DXA did not yield significant differences (p > 0.728 (paired t-test, DXA mean body fat 29.45 ± 10.77 kg, estimated body fat 29.52 ± 12.53 kg. Thus, this portable BIA system shows a promising ability to estimate an individual’s body composition that is comparable to large stationary BIA systems.

  7. Evaluation of bioelectrical impedance analysis for identifying overweight individuals at increased cardiometabolic risk: a cross-sectional study.

    Directory of Open Access Journals (Sweden)

    Maxine J E Lamb

    Full Text Available OBJECTIVE: To investigate whether bioelectrical impedance analysis could be used to identify overweight individuals at increased cardiometabolic risk, defined as the presence of metabolic syndrome and/or diabetes. DESIGN AND METHODS: Cross-sectional study of a Scottish population including 1210 women and 788 men. The diagnostic performance of thresholds of percentage body fat measured by bioelectrical impedance analysis to identify people at increased cardiometabolic risk was assessed using receiver-operating characteristic curves. Odds ratios for increased cardiometabolic risk in body mass index categories associated with values above compared to below sex-specific percentage body fat thresholds with optimal diagnostic performance were calculated using multivariable logistic regression analyses. The validity of bioelectrical impedance analysis to measure percentage body fat in this population was tested by examining agreement between bioelectrical impedance analysis and dual-energy X-ray absorptiometry in a subgroup of individuals. RESULTS: Participants were aged 16-91 years and the optimal bioelectrical impedance analysis cut-points for percentage body fat for identifying people at increased cardiometabolic risk were 25.9% for men and 37.1% for women. Stratifying by these percentage body fat cut-points, the prevalence of increased cardiometabolic risk was 48% and 38% above the threshold and 24% and 19% below these thresholds for men and women, respectively. By comparison, stratifying by percentage body fat category had little impact on identifying increased cardiometabolic risk in normal weight and obese individuals. Fully adjusted odds ratios of being at increased cardiometabolic risk among overweight people with percentage body fat ≥ 25.9/37.1% compared with percentage body fat <25.9/37.1% as a reference were 1.93 (95% confidence interval: 1.20-3.10 for men and 1.79 (1.10-2.92 for women. CONCLUSION: Percentage body fat measured using

  8. Analysis of body water compartments after a short sauna bath using bioelectric impedance analysis.

    Science.gov (United States)

    Servidio, M-F; Mohamed, E I; Maiolo, C; Hereba, A T; Perrone, F; Garofano, P; Iacopino, L

    2003-10-01

    Studies have suggested that long-term sauna bathing may lower blood pressure in persons with hypertension by causing a direct loss of extracellular water and plasma minerals. The objective of the present study was to evaluate the effect of short-term sauna bathing on body water compartments as estimated by bioelectric impedance analysis (BIA). We recruited 15 men [mean age (+/-SD) of 23.93+/-5.12 years and mean body mass index (BMI) of 23.25+/-2.84 kg/m(2)] and 10 women matched for age and BMI. Total body resistance, reactance, and impedance were measured for all participants using BIA, at baseline, after a short sauna bath, and after a rest period. Total, extracellular, and intracellular water compartments were calculated using BIA formulae. There were no significant differences for any of the body water compartments when comparing the measurements taken before and after the sauna bath and after the rest period. However, it remains to be determined whether or not BIA is sensitive to rapid changes in water volume.

  9. Bioelectrical impedance phase angle as a prognostic indicator in breast cancer

    Directory of Open Access Journals (Sweden)

    Dahlk Sadie L

    2008-08-01

    Full Text Available Abstract Background Bioelectrical impedance analysis (BIA is an easy-to-use, non-invasive, and reproducible technique to evaluate changes in body composition and nutritional status. Phase angle, determined by bioelectrical impedance analysis (BIA, detects changes in tissue electrical properties and has been hypothesized to be a marker of malnutrition. Since malnutrition can be found in patients with breast cancer, we investigated the prognostic role of phase angle in breast cancer. Methods We evaluated a case series of 259 histologically confirmed breast cancer patients treated at Cancer Treatment Centers of America. Kaplan Meier method was used to calculate survival. Cox proportional hazard models were constructed to evaluate the prognostic effect of phase angle independent of stage at diagnosis and prior treatment history. Survival was calculated as the time interval between the date of first patient visit to the hospital and the date of death from any cause or date of last contact/last known to be alive. Results Of 259 patients, 81 were newly diagnosed at our hospital while 178 had received prior treatment elsewhere. 56 had stage I disease at diagnosis, 110 had stage II, 46 had stage III and 34 had stage IV. The median age at diagnosis was 49 years (range 25 – 74 years. The median phase angle score was 5.6 (range = 1.5 – 8.9. Patients with phase angle 5.6 had 49.9 months (95% CI: 35.6 to 77.8; n = 130; the difference being statistically significant (p = 0.031. Multivariate Cox modeling, after adjusting for stage at diagnosis and prior treatment history found that every one unit increase in phase angle score was associated with a relative risk of 0.82 (95% CI: 0.68 to 0.99, P = 0.041. Stage at diagnosis (p = 0.006 and prior treatment history (p = 0.001 were also predictive of survival independent of each other and phase angle. Conclusion This study demonstrates that BIA-derived phase angle is an independent prognostic indicator in patients

  10. Evaluation of body composition in COPD patients using multifrequency bioelectrical impedance analysis

    Directory of Open Access Journals (Sweden)

    de Blasio F

    2016-09-01

    Full Text Available Francesca de Blasio,1 Francesco de Blasio,2,3 Giulia Miracco Berlingieri,2 Andrea Bianco,3,4 Marta La Greca,1 Frits M E Franssen,5 Luca Scalfi1 1Department of Public Health, Medical School, “Federico II” University of Naples, 2Respiratory Medicine and Pulmonary Rehabilitation Section, Clinic Center, Private Hospital, Naples, 3Department of Medicine and Health Sciences “V Tiberio”, University of Molise, Campobasso, 4Department of Cardio-Thoracic and Respiratory Sciences, Second University of Naples, Naples, Italy; 5Department of Research and Education, CIRO, Horn, the NetherlandsBackground: Multifrequency bioelectrical impedance analysis (MF-BIA is a technique that measures body impedance (Z at different frequencies (5, 10, 50, 100, and 250 kHz. Body composition may be estimated using empirical equations, which include BIA variables or, alternatively, raw BIA data may provide direct information on water distribution and muscle quality.Objectives: To compare raw MF-BIA data between COPD patients and controls and to study their relationship with respiratory and functional parameters in COPD patients.Methods: MF-BIA was performed (Human Im-Touch analyzer in 212 COPD patients and 115 age- and BMI-matched controls. Fat-free mass (FFM and fat mass were estimated from BIA data, and low- to high-frequency (5 kHz/250 kHz impedance ratio was calculated. Physical fitness, lung function and respiratory muscle strength were also assessed in COPD patients.Results: After adjusting for age, weight, and body mass index, FFM and the 5/250 impedance ratio were lower in COPD patients (P<0.001 and were negatively affected by disease severity. In both male and female patients, the 5/250 impedance ratio was significantly correlated mainly with age (r=−0.316 and r=−0.346, respectively. Patients with a 5/250 impedance ratio below median value had lower handgrip strength (P<0.001, 6-minute walk distance (P<0.005, respiratory muscle strength (P<0.005, forced

  11. Bioelectrical impedance analysis: population reference values for phase angle by age and sex.

    Science.gov (United States)

    Barbosa-Silva, Maria Cristina G; Barros, Aluísio J D; Wang, Jack; Heymsfield, Steven B; Pierson, Richard N

    2005-07-01

    Phase angle is an indicator based on reactance and resistance obtained from bioelectrical impedance analysis (BIA). Although its biological meaning is still not clear, phase angle appears to have an important prognostic role. The aim of this study was to estimate population averages and SDs of phase angle that can be used as reference values. BIA and other methods used to evaluate body composition, including hydrodensitometry and total body water, were completed in 1967 healthy adults aged 18-94 y. Phase angle was calculated directly from body resistance and reactance, and fat mass (FM) was estimated from the combination of weight, hydrodensitometry, and total body water by using the 3-compartment Siri equation. Phase angle values were compared across categories of sex, age, body mass index (BMI), and percentage FM. Phase angle was significantly (P < 0.001) smaller in women than in men and was lower with greater age (P < 0.001). Phase angle increased with an increase in BMI and was significantly inversely associated with percentage fat in men. Phase angle was significantly predicted from sex, age, BMI, and percentage FM in multiple regression models. Phase angle differs across categories of sex, age, BMI, and percentage fat. These reference values can serve as a basis for phase angle evaluations in the clinical setting.

  12. Estimating body composition from skinfold thicknesses and bioelectrical impedance analysis in cystic fibrosis patients.

    Science.gov (United States)

    Alicandro, Gianfranco; Battezzati, Alberto; Bianchi, Maria Luisa; Loi, Silvana; Speziali, Chiara; Bisogno, Arianna; Colombo, Carla

    2015-11-01

    The accuracy of body composition estimates based on skinfold thickness measurements and bioelectrical impedance analysis (BIA) is not yet adequately explored in cystic fibrosis (CF). Using DXA as reference method we verified the accuracy of these techniques and identified predictors of body composition specific for CF. One hundred forty-two CF patients (age range: 8-31 years) underwent a DXA scan. Body fat percentage (BF%) was estimated from skinfolds, while fat free mass (FFM) from single-frequency 50 kHz BIA. Bland-Altman analysis showed poor intra-individual agreement between body composition data provided by DXA and BF% estimated from skinfolds or FFM estimated from BIA. The skinfolds of the upper arm were better predictors of BF% than BMI, while compared to other BIA measurements the best predictor of FFM was the R-index (Height(2)/Resistance). Due to poor accuracy at individual level, the estimates of body composition obtained from these techniques cannot be part of the standard nutritional assessment of CF patients until reliable CF-specific equations will become available. BMI has limited value in predicting body fatness in CF patients and should be used in combination with other predictors. Skinfolds of the upper arm and R-index are strongly related to BF% and FFM and should be tested in a large CF population to develop specific predictive equations. Copyright © 2015 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

  13. Validity of Bioelectrical Impedance Analysis to Estimation Fat-Free Mass in the Army Cadets

    Directory of Open Access Journals (Sweden)

    Raquel D. Langer

    2016-03-01

    Full Text Available Background: Bioelectrical Impedance Analysis (BIA is a fast, practical, non-invasive, and frequently used method for fat-free mass (FFM estimation. The aims of this study were to validate predictive equations of BIA to FFM estimation in Army cadets and to develop and validate a specific BIA equation for this population. Methods: A total of 396 males, Brazilian Army cadets, aged 17–24 years were included. The study used eight published predictive BIA equations, a specific equation in FFM estimation, and dual-energy X-ray absorptiometry (DXA as a reference method. Student’s t-test (for paired sample, linear regression analysis, and Bland–Altman method were used to test the validity of the BIA equations. Results: Predictive BIA equations showed significant differences in FFM compared to DXA (p < 0.05 and large limits of agreement by Bland–Altman. Predictive BIA equations explained 68% to 88% of FFM variance. Specific BIA equations showed no significant differences in FFM, compared to DXA values. Conclusion: Published BIA predictive equations showed poor accuracy in this sample. The specific BIA equations, developed in this study, demonstrated validity for this sample, although should be used with caution in samples with a large range of FFM.

  14. [Values of the phase angle by bioelectrical impedance; nutritional status and prognostic value].

    Science.gov (United States)

    Llames, L; Baldomero, V; Iglesias, M L; Rodota, L P

    2013-01-01

    Phase angle (PA) is the most established parameter from bioelectrical impedance analysis (BIA) for diagnosis of malnutrition and clinical prognosis, both associated with changes on cellular membrane integrity and alterations on fluids balance. PA expresses changes in quantity and quality of soft tissue mass (ie, cell membrane permeability and soft tissue hydration). A large body of clinical trials propose PA as a useful prognostic marker in clinical conditions like liver cirrhosis and breast, colon, pancreatic and lung cancer; positive association between PA and survival was also observed in surgical and HIV infected patients. Several authors suggest that PA can be an important tool in the evaluation of the clinical result or of the progression of the disease, and it can even be superior to other nutritional, biochemical or anthropometric indicators. Lack of reference values has limited its use in clinical and epidemiological situations. The purpose of this review is to describe PA reference values according to different clinical conditions as proposed in published scientific works.

  15. Accuracy of segmental bioelectrical impedance analysis for predicting body composition in pre- and postmenopausal women.

    Science.gov (United States)

    Tanaka, Noriko I; Hanawa, Satoshi; Murakami, Haruka; Cao, Zhen-Bo; Tanimoto, Michiya; Sanada, Kiyoshi; Miyachi, Motohiko

    2015-01-01

    This study aimed to compare the accuracy for predicting body composition using single-frequent segmental bioelectrical impedance analysis (BIA) between pre- and postmenopausal women. A total f 559 Japanese women aged 30-88yr were divided into 4 groups by questionnaire: natural menopause, pathological menopause, regular menstruation, or irregular menstruation. The measurement values by dual-energy X-ray absorptiometry were used as a reference of the body composition. In terms of the results, regardless of the menopausal status, BIA slightly but significantly overestimated the percentage of body fat (standard error of estimate: 5.3%-6.7%) and the leg lean soft tissue mass (LSTM; 5.1%-6.1%), and underestimated the LSTM in the whole body (6.2%-7.6%) and arm (2.8%-3.7%). The absolute values of the predictive error for leg LSTM were significantly higher in postmenopausal groups than in the premenopausal ones. The corresponding values for the whole body and arm LSTM, and the percentage of body fat were higher in premenopausal groups than in postmenopausal ones. In conclusion, the predictive accuracy of BIA for postmenopausal women is not inferior to that for premenopausal ones, unless we target the leg LSTM.

  16. Diagnostic value of bioelectrical impedance analysis versus body mass index for detection of obesity among students.

    Science.gov (United States)

    Heydari, Seyed-Taghi; Ayatollahi, Seyed-Mohammad-Taghi; Zare, Najaf

    2011-06-01

    Obesity is a common nutritional problem in both developed and developing countries. The aim of this study was to determine the prevalence of overweightness and obesity using both bioelectrical impedance analysis (BIA) and body mass index (BMI). In this cross-sectional study, 288 healthy college students were selected. Socio-economic status questionnaires were completed and subjects' anthropometric features were measured by a trained nurse. BMI was calculated and body fat mass (BFM) and body fat percent (BF%) were obtained using BIA method by hand-to-hand Omron BF-500 set. Mean age of the subjects was 21.1±1.7 years. Based on BMI, 2.6% of males and 2.2% of females were obese while 15.7% and 9.6% were diagnosed to be overweight respectively. The correlation between BMI values and BFM were 0.883 and 0.908 in males and females respectively (Pcollege students compared with Iranian general population, especially in females. Additionally, BIA method was shown to be closely correlated with and as much valuable as BMI in regard to detection of obesity.

  17. Quantitative Assessment of Fluid Accumulation Using Bioelectrical Impedance Analysis in Patients With Acute Decompensated Heart Failure.

    Science.gov (United States)

    Sakaguchi, Taiki; Yasumura, Kaori; Nishida, Hiroki; Inoue, Hiroyuki; Furukawa, Tetsuo; Shinouchi, Kazuya; Miura, Hiroyuki; Miyazaki, Koichi; Hamano, Gou; Koide, Masao; Abe, Haruhiko; Date, Motoo; Hirooka, Keiji; Koretsune, Yukihiro; Kusuoka, Hideo; Yasumura, Yoshio

    2015-01-01

    Acute decompensated heart failure (ADHF) is generally considered to be a problem of fluid volume overload, therefore accurately quantifying the degree of fluid accumulation is of critical importance in assessing whether adequate decongestion has been achieved. The aim of this study was to develop and validate a method to quantify the degree of fluid accumulation in patients with ADHF. Using multi-frequency bioelectrical impedance analysis (BIA), we measured extracellular water (ECW) volume in 130 ADHF patients on admission and at discharge. We also predicted optimal ECW volume using original equations based on data from 60 control subjects without the signs of HF. Measured/predicted (M/P) ratio of ECW in ADHF patients was observed to decrease from 1.26±0.25 to 1.04±0.17 during hospitalization (P<0.001). The amount of ECW volume reduction was significantly correlated with reduction in body weight (r=0.766, P<0.001). On multivariate analysis, higher M/P ratio of ECW at discharge was associated with increased risk of ADHF readmission or cardiac death within 6 months after discharge. Multi-frequency BIA-measured ECW was found to offer valuable information for analyzing the pathophysiology of ADHF, and may be a useful guide in the management of this disease.

  18. Bioelectrical impedance analysis determination of water content and distribution in the horse.

    Science.gov (United States)

    Latman, Neal S; Keith, Natalie; Nicholson, Alan; Davis, Michael

    2011-06-01

    A horse's hydration status is critical to its health. The accurate and quantitative determination of it has been problematic because of size, length and density of hair, and uneven topography. The objective of this study was to validate a bioelectrical impedance analysis (BIA) method for objectively quantifying hydration status. Monofrequency BIA values and simple biometric measurements were used to construct predictive equations for total body water, plasma, extracellular, and intra-cellular fluid volumes. These predictive equations were correlated with standard body fluid dilution reference methods. The result was an accuracy of ±0.64% for total body water, ±0.17% for plasma volume, ±1.91% for extra-cellular fluid, and ±0.57% for intra-cellular fluid compartments. Less than 5 min was required for all of the measurements and determinations. Therefore, it appears that an accurate measurement of body fluid distribution can be performed on horses using a fast, easy, non-invasive, inexpensive BIA method.

  19. Bioelectrical impedance analysis and skinfold thickness sum in assessing body fat mass of renal dialysis patients.

    Science.gov (United States)

    Rodrigues, Natália Cristina Lima; Sala, Priscila Campos; Horie, Lilian Mika; Dias, Maria Carolina Gonçalves; Torrinhas, Raquel Susana Matos de Miranda; Romão, João Egídio; Cecconello, Ivan; Waitzberg, Dan Linetzky

    2012-07-01

    In chronic renal failure patients under hemodialysis (HD) treatment, the availability of simple, safe, and effective tools to assess body composition enables evaluation of body composition accurately, in spite of changes in body fluids that occur in dialysis therapy, thus contributing to planning and monitoring of nutritional treatment. We evaluated the performance of bioelectrical impedance analysis (BIA) and the skinfold thickness sum (SKF) to assess fat mass (FM) in chronic renal failure patients before (BHD) and after (AHD) HD, using air displacement plethysmography (ADP) as the standard method. This single-center cross-sectional trial involved comparing the FM of 60 HD patients estimated BHD and AHD by BIA (multifrequential; 29 women, 31 men) and by SKF with those estimated by the reference method, ADP. Body fat-free mass (FFM) was also obtained by subtracting the total body fat from the individual total weight. Mean estimated FM (kg [%]) observed by ADP BHD was 17.95 ± 0.99 kg (30.11% ± 1.30%), with a 95% confidence interval (CI) of 16.00 to 19.90 (27.56 to 32.66); mean estimated FM observed AHD was 17.92 ± 1.11 kg (30.04% ± 1.40%), with a 95% CI of 15.74 to 20.10 (27.28 to 32.79). Neither study period showed a difference in FM and FFM (for both kg and %) estimates by the SKF method when compared with ADP; however, the BIA underestimated the FM and overestimated the FFM (for both kg and %) when compared with ADP. The SKF, but not the BIA, method showed results similar to ADP and can be considered adequate for FM evaluation in HD patients. Copyright © 2012 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  20. Assessment of body composition using bioelectrical impedance analysis in Prader-Willi syndrome

    Directory of Open Access Journals (Sweden)

    Hsiang-Yu Lin

    2011-11-01

    Full Text Available This study investigated the use of bioelectrical impedance analysis (BIA as a means of assessing body composition in patients with Prader-Willi syndrome (PWS. Segmental, multifrequency BIA was performed on 30 patients with PWS (16 males and 14 females; mean age: 8.1 ± 3.9 years; age range: 2.9–19.6 years using eight tactile electrodes. No patient had received growth hormone treatment prior to baseline measurements. Standard deviation scores for height, weight, and body mass index were –0.96 ± 1.29, 2.28 ± 2.66, and 3.14 ± 2.74, respectively. Percentages of body fat, total body water, and soft lean mass were 45.9 ± 10.8%, 36.6 ± 7.3%, and 49.9 ± 9.9%, respectively. Body fat percentage was positively correlated with the body mass index standard deviation score (r = 0.665, p < 0.01. Follow-up BIA was also performed on five patients who received growth hormone therapy (duration of treatment: 1.5–4.6 years. All of these patients showed reductions in their body fat percentages after treatment. BIA confirmed a significantly higher percentage of body fat in patients with PWS compared with normal children. These findings and the follow-up data can be used to develop quality care strategies for patients with PWS.

  1. A Useful Tool As a Medical Checkup in a General Population—Bioelectrical Impedance Analysis

    Science.gov (United States)

    Enomoto, Mika; Adachi, Hisashi; Fukami, Ako; Kumagai, Eita; Nakamura, Sachiko; Nohara, Yume; Kono, Shoko; Nakao, Erika; Morikawa, Nagisa; Tsuru, Tomoko; Sakaue, Akiko; Fukumoto, Yoshihiro

    2017-01-01

    Accumulation of visceral fat leads to metabolic syndrome and increases risks of cerebro-cardiovascular diseases, which should be recognized and improved at the early stage in general population. Accurate measurement of visceral fat area (VFA) is commonly performed by the abdominal cross-sectional image measured by computed tomography scan, which is, however, limited due to the radiation exposure. The bioelectrical impedance analysis (OMRON, HDS-2000 DUALSCANR) has been recently developed to measure VFA, which is more easily accessible modality. In the present study, we investigated the clinical usefulness of DUALSCANR in 226 subjects who received health examination, including blood chemistries, electrocardiography, cardio, and carotid ultrasonography. VFA was measured within only just 5 min. Average of VFA was 83.5 ± 36.3 cm2 in men, and 64.8 ± 28.0 cm2 in women, which was correlated to weight (r = 0.7404, p < 0.0001), body mass index (BMI) (r = 0.7320, p < 0.0001), and waist circumstance (r = 0.7393, p < 0.0001). In multivariate analyses, VFA was significantly associated with weight (p < 0.0001), BMI (p < 0.0001), and waist circumstance (p < 0.0001). Compared to the group of smaller waist and normal BMI, VFA was significantly increased (p < 0.0001) in the group of larger waist and obese subjects. In conclusion, these results indicated that DUALSCANR is useful to measure VFA easily in general population, even in a large number of subjects. PMID:28210619

  2. Effect of the ethinylestradiol/norelgestromin contraceptive patch on body composition. Results of bioelectrical impedance analysis in a population of Italian women

    Directory of Open Access Journals (Sweden)

    Bruni Vincenzina

    2008-08-01

    Full Text Available Abstract Background As weight gain is one of the most frequently cited reasons for not using and for discontinuing hormonal contraceptives, in an open-label, single-arm, multicentre clinical study we evaluated the effect of the ethinylestradiol/norelgestromin contraceptive patch (EVRA, Janssen-Cilag International, Belgium on body composition using bioelectrical impedance analysis (BIA. Methods Body weight and impedance vector components (resistance (R and reactance (Xc, at 50 kHz frequency, Akern-RJL Systems analyzer were recorded before entry, after 1, 3 and 6 months in 182 Italian healthy women aged 29 yr (18 to 45, and with BMI 21.8 kg/m2 (16 to 31. Total body water (TBW was estimated with a BIA regression equation. Vector BIA was performed with the RXc mean graph method and the Hotelling's T2 test for paired and unpaired data. Results After 6 months body weight increased by 0.64 kg (1.1% and TBW increased by 0.51 L (1.7%. The pattern of impedance vector displacement indicated a small increase in soft tissue hydration (interstitial gel fluid. Body composition changes did not significantly differ among groups of previous contraceptive methods. Arterial blood pressure did not significantly change over time. Conclusion After 6 months of treatment with the ethinylestradiol/norelgestromin contraceptive patch we found a minimal, clinically not relevant, increase in body weight less than 1 kg that could be attributed to an adaptive interstitial gel hydration. This fluctuation is physiological as confirmed by the lack of any effect on blood pressure. This could be useful in increasing women's choice, acceptability and compliance of the ethinylestradiol/norelgestromin contraceptive patch.

  3. Bioelectrical impedance analysis in clinical practice: implications for hepatitis C therapy BIA and hepatitis C

    Directory of Open Access Journals (Sweden)

    Kahraman Alisan

    2010-08-01

    Full Text Available Abstract Background Body composition analysis using phase angle (PA, determined by bioelectrical impedance analysis (BIA, reflects tissue electrical properties and has prognostic value in liver cirrhosis. Objective of this prospective study was to investigate clinical use and prognostic value of BIA-derived phase angle and alterations in body composition for hepatitis C infection (HCV following antiviral therapy. Methods 37 consecutive patients with HCV infection were enrolled, BIA was performed, and PA was calculated from each pair of measurements. 22 HCV genotype 3 patients treated for 24 weeks and 15 genotype 1 patients treated for 48 weeks, were examined before and after antiviral treatment and compared to 10 untreated HCV patients at 0, 24, and 48 weeks. Basic laboratory data were correlated to body composition alterations. Results Significant reduction in body fat (BF: 24.2 ± 6.7 kg vs. 19.9 ± 6.6 kg, genotype1; 15.4 ± 10.9 kg vs. 13.2 ± 12.1 kg, genotype 3 and body cell mass (BCM: 27.3 ± 6.8 kg vs. 24.3 ± 7.2 kg, genotype1; 27.7 ± 8.8 kg vs. 24.6 ± 7.6 kg, genotype 3 was found following treatment. PA in genotype 3 patients was significantly lowered after antiviral treatment compared to initial measurements (5.9 ± 0.7° vs. 5.4 ± 0.8°. Total body water (TBW was significantly decreased in treated patients with genotype 1 (41.4 ± 7.9 l vs. 40.8 ± 9.5 l. PA reduction was accompanied by flu-like syndromes, whereas TBW decline was more frequently associated with fatigue and cephalgia. Discussion BIA offers a sophisticated analysis of body composition including BF, BCM, and TBW for HCV patients following antiviral regimens. PA reduction was associated with increased adverse effects of the antiviral therapy allowing a more dynamic therapy application.

  4. Effects of hydration and dehydration on body composition analysis: a comparative study of bioelectric impedance analysis and hydrodensitometry.

    Science.gov (United States)

    Thompson, D L; Thompson, W R; Prestridge, T J; Bailey, J G; Bean, M H; Brown, S P; McDaniel, J B

    1991-12-01

    Since 1983, bioelectric impedance has been researched with respect to its validity and reliability in the determination of body composition. It continues to be compared to hydrostatic weighing, the anthropometric "gold standard". This study was designed to investigate the relationship between bioelectric impedance analysis (BIA) and hydrodensitometry (HW) under three conditions: control, hydration and dehydration. Caucasian males (aged 18-44 years) served as subjects (n = 10). Body composition was determined by BIA and HW before intervention, 30 minutes post-hydration, and following a combination of exercise and sitting in a steam room to decrease body weight by two to four percent (mean = 2.81%). Statistical treatment by two-way analysis of variance for repeated measures revealed that although there were no significant differences between the two techniques of body composition determination under any of the three conditions, there was a statistically significant decrease in percent body fat determined in the dehydrated state as compared to the control and hydrated conditions. Recommendations include the determination of hydration state prior to engaging in body composition analysis by either method.

  5. Validity and reliability of bioelectrical impedance analysis and skinfold thickness in predicting body fat in military personnel.

    Science.gov (United States)

    Aandstad, Anders; Holtberget, Kristian; Hageberg, Rune; Holme, Ingar; Anderssen, Sigmund A

    2014-02-01

    Previous studies show that body composition is related to injury risk and physical performance in soldiers. Thus, valid methods for measuring body composition in military personnel are needed. The frequently used body mass index method is not a valid measure of body composition in soldiers, but reliability and validity of alternative field methods are less investigated in military personnel. Thus, we carried out test and retest of skinfold (SKF), single frequency bioelectrical impedance analysis (SF-BIA), and multifrequency bioelectrical impedance analysis measurements in 65 male and female soldiers. Several validated equations were used to predict percent body fat from these methods. Dual-energy X-ray absorptiometry was also measured, and acted as the criterion method. Results showed that SF-BIA was the most reliable method in both genders. In women, SF-BIA was also the most valid method, whereas SKF or a combination of SKF and SF-BIA produced the highest validity in men. Reliability and validity varied substantially among the equations examined. The best methods and equations produced test-retest 95% limits of agreement below ±1% points, whereas the corresponding validity figures were ±3.5% points. Each investigator and practitioner must consider whether such measurement errors are acceptable for its specific use. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

  6. Bioelectrical impedance analysis and anthropometry for the determination of body composition in rats: effects of high-fat and high-sucrose diets

    Directory of Open Access Journals (Sweden)

    Larissa Rodrigues Neto Angéloco

    2012-06-01

    Full Text Available OBJECTIVE: The aim of the present study was to determine the impedance of Wistar rats treated with high-fat and high-sucrose diets and correlate their biochemical and anthropometric parameters with chemical analysis of the carcass. METHODS: Twenty-four male Wistar rats were fed a standard (AIN-93, high-fat (50% fat or high-sucrose (59% of sucrose diet for 4 weeks. Abdominal and thoracic circumference and body length were measured. Bioelectrical impedance analysis was used to determine resistance and reactance. Final body composition was determined by chemical analysis. RESULTS: Higher fat intake led to a high percentage of liver fat and cholesterol and low total body water in the High-Fat group, but these changes in the biochemical profile were not reflected by the anthropometric measurements or bioelectrical impedance analysis variables. Anthropometric and bioelectrical impedance analysis changes were not observed in the High-Sucrose group. However, a positive association was found between body fat and three anthropometric variables: body mass index, Lee index and abdominal circumference. CONCLUSION: Bioelectrical impedance analysis did not prove to be sensitive for detecting changes in body composition, but body mass index, Lee index and abdominal circumference can be used for estimating the body composition of rats.

  7. Validity of segmental bioelectrical impedance analysis for estimating fat-free mass in children including overweight individuals.

    Science.gov (United States)

    Ohta, Megumi; Midorikawa, Taishi; Hikihara, Yuki; Masuo, Yoshihisa; Sakamoto, Shizuo; Torii, Suguru; Kawakami, Yasuo; Fukunaga, Tetsuo; Kanehisa, Hiroaki

    2017-02-01

    This study examined the validity of segmental bioelectrical impedance (BI) analysis for predicting the fat-free masses (FFMs) of whole-body and body segments in children including overweight individuals. The FFM and impedance (Z) values of arms, trunk, legs, and whole body were determined using a dual-energy X-ray absorptiometry and segmental BI analyses, respectively, in 149 boys and girls aged 6 to 12 years, who were divided into model-development (n = 74), cross-validation (n = 35), and overweight (n = 40) groups. Simple regression analysis was applied to (length)(2)/Z (BI index) for each of the whole-body and 3 segments to develop the prediction equations of the measured FFM of the related body part. In the model-development group, the BI index of each of the 3 segments and whole body was significantly correlated to the measured FFM (R(2) = 0.867-0.932, standard error of estimation = 0.18-1.44 kg (5.9%-8.7%)). There was no significant difference between the measured and predicted FFM values without systematic error. The application of each equation derived in the model-development group to the cross-validation and overweight groups did not produce significant differences between the measured and predicted FFM values and systematic errors, with an exception that the arm FFM in the overweight group was overestimated. Segmental bioelectrical impedance analysis is useful for predicting the FFM of each of whole-body and body segments in children including overweight individuals, although the application for estimating arm FFM in overweight individuals requires a certain modification.

  8. Prediction of fat-free body mass from bioelectrical impedance among 9- to 11-year-old Swedish children

    DEFF Research Database (Denmark)

    Nielsen, Birgit Marie; Dencker, M; Ward, L

    2007-01-01

    AIM: Predictive equations for estimating body composition from bioelectrical impedance analysis (BIA) among Scandinavian children are lacking. In the present study, equations for estimation of fat-free body mass (FFM) and lean tissue mass (LTM) were developed and cross-validated from BIA using dual......-validation revealed a mean RMSE = 0.95 kg FFM and a mean RMSE = 0.96 kg LTM. Prediction of body composition from equations developed in previous literature was mixed when applied to the present cohort of children. CONCLUSIONS: FFM and LTM are predicted with sufficient accuracy at the population level. We recommend...... that the predictive equations developed in the present study are used in prepubescent European children aged 9-11 years only in order to minimize confounding of results because of possible differences in population samples....

  9. Inter-sport variability of muscle volume distribution identified by segmental bioelectrical impedance analysis in four ball sports

    Directory of Open Access Journals (Sweden)

    Yamada Y

    2013-04-01

    Full Text Available Yosuke Yamada,1,2 Yoshihisa Masuo,3 Eitaro Nakamura,4 Shingo Oda5 1Laboratory of Sports and Health Science, Kyoto Prefectural University of Medicine, Kyoto, Japan; 2Japan Society for the Promotion of Science, Tokyo, Japan; 3Waseda University Research Institute for Elderly Health, Saitama, Japan; 4Department of Sport Science, Kyoto Iken College of Medicine and Health, Kyoto, Japan; 5Faculty of Health and Well-being, Kansai University, Osaka, Japan Abstract: The aim of this study was to evaluate and quantify differences in muscle distribution in athletes of various ball sports using segmental bioelectrical impedance analysis (SBIA. Participants were 115 male collegiate athletes from four ball sports (baseball, soccer, tennis, and lacrosse. Percent body fat (%BF and lean body mass were measured, and SBIA was used to measure segmental muscle volume (MV in bilateral upper arms, forearms, thighs, and lower legs. We calculated the MV ratios of dominant to nondominant, proximal to distal, and upper to lower limbs. The measurements consisted of a total of 31 variables. Cluster and factor analyses were applied to identify redundant variables. The muscle distribution was significantly different among groups, but the %BF was not. The classification procedures of the discriminant analysis could correctly distinguish 84.3% of the athletes. These results suggest that collegiate ball game athletes have adapted their physique to their sport movements very well, and the SBIA, which is an affordable, noninvasive, easy-to-operate, and fast alternative method in the field, can distinguish ball game athletes according to their specific muscle distribution within a 5-minute measurement. The SBIA could be a useful, affordable, and fast tool for identifying talents for specific sports. Keywords: discriminant analysis, cluster and factor analysis, segmental bioelectrical impedance analysis, baseball, lacrosse

  10. Measuring body composition in dogs using multifrequency bioelectrical impedance analysis and dual energy X-ray absorptiometry.

    Science.gov (United States)

    Rae, L S; Vankan, D M; Rand, J S; Flickinger, E A; Ward, L C

    2016-06-01

    Thirty-five healthy, neutered, mixed breed dogs were used to determine the ability of multifrequency bioelectrical impedance analysis (MFBIA) to predict accurately fat-free mass (FFM) in dogs using dual energy X-ray absorptiometry (DXA)-measured FFM as reference. A second aim was to compare MFBIA predictions with morphometric predictions. MFBIA-based predictors provided an accurate measure of FFM, within 1.5% when compared to DXA-derived FFM, in normal weight dogs. FFM estimates were most highly correlated with DXA-measured FFM when the prediction equation included resistance quotient, bodyweight, and body condition score. At the population level, the inclusion of impedance as a predictor variable did not add substantially to the predictive power achieved with morphometric variables alone; in individual dogs, impedance predictors were more valuable than morphometric predictors. These results indicate that, following further validation, MFBIA could provide a useful tool in clinical practice to objectively measure FFM in canine patients and help improve compliance with prevention and treatment programs for obesity in dogs.

  11. Influence of Posture and Frequency Modes in Total Body Water Estimation Using Bioelectrical Impedance Spectroscopy in Boys and Adult Males

    Directory of Open Access Journals (Sweden)

    Masaharu Kagawa

    2014-05-01

    Full Text Available The aim of the study was to examine differences in total body water (TBW measured using single-frequency (SF and multi-frequency (MF modes of bioelectrical impedance spectroscopy (BIS in children and adults measured in different postures using the deuterium (2H dilution technique as the reference. Twenty-three boys and 26 adult males underwent assessment of TBW using the dilution technique and BIS measured in supine and standing positions using two frequencies of the SF mode (50 kHz and 100 kHz and the MF mode. While TBW estimated from the MF mode was comparable, extra-cellular fluid (ECF and intra-cellular fluid (ICF values differed significantly (p < 0.01 between the different postures in both groups. In addition, while estimated TBW in adult males using the MF mode was significantly (p < 0.01 greater than the result from the dilution technique, TBW estimated using the SF mode and prediction equation was significantly (p < 0.01 lower in boys. Measurement posture may not affect estimation of TBW in boys and adult males, however, body fluid shifts may still occur. In addition, technical factors, including selection of prediction equation, may be important when TBW is estimated from measured impedance.

  12. On Chip Bioelectric Impedance Spectroscopy Reveals the Effect of P-Glycoprotein Efflux Pumps on the Paracellular Impedance of Tight Junctions at the Blood-Brain Barrier.

    Science.gov (United States)

    Kraya, Ramsey; Komin, Alexander; Searson, Peter

    2016-10-01

    Bioelectric impedance spectroscopy was used to elucidate the influence of P-gp efflux pumps on the kinetics of tight junction down-regulation in confluent monolayers of Madine Darby Canine Kidney Epithelial Cells (MDCK) following administration of phenylarsine oxide (PAO), a molecule that inhibits protein tyrosine phosphatases (PTP) and induces matrix metalloproteinase activity. Matrix metalloproteinases (MMPs) and phosphatase inhibitors induce modification of occludin tight junction proteins critical for the proper function of the blood-brain barrier. The addition of PAO to MDCKII cell lines resulted in a dramatic decrease in monolayer resistance. In contrast, MDCKII-MDR1 cells transfected with the MDR1 gene treated with PAO showed an initial decrease in monolayer resistance followed by a partial recovery and subsequent decrease. This resistance decay reversal was suppressed with the addition of the P-glycoprotein (P-gp) pump inhibitor elacridar, and is attributed to PAO efflux. These results illustrate impedance spectroscopy can be used to characterize the competing kinetics of efflux and down-regulation of tight junctions. In addition, the resistance decay reversal effect can be used to evaluate P-gp pump inhibitor efficacy.

  13. Biochemical and anthropometric correlates of bio-electrical impedance parameters in severely malnourished children

    DEFF Research Database (Denmark)

    Girma, Tsinuel; Nielsen, Anne-Louise Hother; Kæstel, Pernille

    2017-01-01

    INTRODUCTION: Despite expanding use of bio-impedance (BI), little is known about its pathophysiologic significance and biological correlates OBJECTIVE: Determine correlations of BI parameters with anthropometry and biomarkers of electrolyte homeostasis, inflammation and liver function in children...

  14. Tracking of anthropometric parameters and bioelectrical impedance in pubertal boys and girls.

    Science.gov (United States)

    Leppik, Aire; Jürimäe, Toivo; Jürimäe, Jaak

    2006-12-01

    The aim of this study was to investigate the anthropometric parameters and body impedance once per year during four years of the pubertal period in Estonian children. In total, 81 boys and 86 girls aged 10-11 years at the beginning of the study were investigated. Pubertal status was self-assessed by sexual maturation stages according to Tanner and physical activity index (PAI) according to Telama et al.. Body height and weight were measured and body mass index (BMI) calculated. In total, 9 skinfolds, 13 girths, 8 lengths and 8 breadths/lengths were measured according to the protocol of the International Society for the Advancement of Kinanthropometry. Somatotype components were estimated according to the method of Carter and Heath. Body impedance was measured using Multiscan 5000 (Bodystat, UK) and the impedance index (height/impedance) was calculated. The tracking of body height, weight, BMI, skinfolds, girths, lengths, breadth/lengths and body impedance was high (as a rule r> or =0.9). By increasing the time period, the correlation slightly decreased. In contrast, tracking correlations for PAI and Tanner stages were significant but quite low. Increase in mean body height was highest between 12-13 years of age (6.9 cm per year) in boys and in girls between 11-12 years of age (6.3 cm per year). In boys and girls, the peak increase in body weight was between 11 and 12 years of age, 5.7 kg and 5.2 kg, respectively. With the increasing age, body impedance decreased and impedance index increased. In conclusion, our results indicate that during puberty the detailed anthropometric parameters and body impedance tracked highly. However, the tracking of PAI and Tanner stages was significant but relatively low.

  15. Association of plasma adiponectin levels with cellular hydration state measured using bioelectrical impedance analysis in patients with COPD

    Directory of Open Access Journals (Sweden)

    Yoshikawa T

    2012-08-01

    Full Text Available Takahiro Yoshikawa,1 Hiroshi Kanazawa21Department of Sports Medicine, Osaka City University Graduate School of Medicine, 2Department of Respiratory Medicine, Osaka City University Graduate School of Medicine, Osaka, JapanBackground: It is widely recognized that chronic obstructive pulmonary disease (COPD includes a variety of extra pulmonary complications and comorbidities. Recently, adiponectin was shown to regulate cellular metabolism in humans. Cellular hydration state is affected by a variety of hormonal factors and regulates cellular metabolic state. Therefore, this study was designed to determine whether adiponectin is a possible factor involved in cellular hydration state in COPD.Methods: Thirty patients with COPD and 41 age-matched controls participated in the study. Plasma levels of total and high molecular weight (HMW adiponectin were measured and anthropometry and pulmonary function tests were conducted. Intracellular water (ICW, extracellular water (ECW, and ECW/ICW ratio, which are parameters of cellular hydration state, were measured using bioelectrical impedance analysis.Results: Higher levels of total and HMW adiponectin in plasma were found in patients with COPD compared with levels in controls. A significant inverse correlation was observed between body mass index and plasma levels of total and HMW adiponectin in the control group. However, this significant correlation was not observed in patients with COPD. The plasma levels of total and HMW adiponectin were also not significantly correlated with any pulmonary function parameters in patients with COPD. Regarding the state of cellular hydration, the plasma levels of total adiponectin were inversely correlated with the ECW/ICW ratio and positively with ICW values in patients with COPD. Moreover, closer correlations were found between these parameters and plasma HMW adiponectin levels.Conclusion: The results of the present study suggest a novel association of the plasma

  16. Prevalence of malnutrition and validation of bioelectrical impedance analysis for the assessment of body composition in patients with systemic sclerosis.

    Science.gov (United States)

    Spanjer, Moon J; Bultink, Irene E M; de van der Schueren, Marian A E; Voskuyl, Alexandre E

    2017-06-01

    The aims were to assess the prevalence of malnutrition and to validate bioelectrical impedance analysis (BIA) against whole-body DXA for the assessment of body composition in patients with SSc. Malnutrition was defined as BMI 10% in combination with a fat-free mass index (FFMI) 70 years). Body composition was assessed in 72 patients with whole-body DXA (Hologic, Discovery A) and BIA (Bodystat Quadscan 400). The manufacturer's equation and the Geneva equation were used to estimate FFM and fat mass. The agreement between BIA and whole-body DXA was assessed with Bland-Altman analysis and intraclass correlation coefficient. Malnutrition was found in 8.3% (n = 6) and low FFMI in 20.8% (n = 15) of patients. The mean difference in FFM between BIA and DXA applying the Geneva equation was 0.02 ( s . d . 2.4) kg, intraclass correlation coefficient 0.97 (95% CI: 0.95, 0.98). Limits of agreement were ±4.6 kg. The manufacturer's equation was less adequate to predict FFM. This study shows a relatively low prevalence of malnutrition in comparison with other studies, but a high prevalence of low FFMI, underlining the necessity of measuring body composition in SSc patients with a standardized and validated method. A good validity of BIA in determining FFM was found at a group level, while at an individual level the FFM may vary by 4.6 kg.

  17. Phase Angle of Bioelectrical Impedance Analysis as Prognostic Factor in Palliative Care Patients at the National Cancer Institute in Mexico.

    Science.gov (United States)

    Pérez Camargo, Dana A; Allende Pérez, Silvia R; Rivera Franco, Mónica M; Álvarez Licona, Nelson E; Urbalejo Ceniceros, Víctor I; Figueroa Baldenegro, Lilian E

    2017-01-01

    Patients with advanced cancer often experience symptoms of disease and treatment that contribute to distress such as weight loss, which is present in up to 85% of cancer patients. Palliative care in these patients focuses on care aimed at improving quality of life. Phase angle (PA) is obtained by bioelectric impedance analysis (BIA) and is associated with cellular function. It is considered a reliable marker of malnutrition. A low PA may suggest deterioration of the cell membrane, which in palliative patients may result in a short-term survival. The aim of this study was to associate PA and survival in palliative patients of the National Cancer Institute of Mexico. We included 452 patients (women, 56.4%); the average PA was 4.0°. The most frequent disease was gastric cancer (39.2%). Mean body mass index (BMI) was 22.84. The average survival of patients with PA ≤ 4° was 86 days, while in the group with PA > 4°, it was 163 days (P > 0.0001). PA showed significant positive correlation with survival time and BMI. Our results corroborate the reliability of PA in Mexican population, as an indicator of survival in palliative care patients compared to the reported literature in other countries.

  18. Estimation of prevalence of sarcopenia by using a new bioelectrical impedance analysis in Chinese community-dwelling elderly people.

    Science.gov (United States)

    Wang, Hui; Hai, Shan; Cao, Li; Zhou, Jianghua; Liu, Ping; Dong, Bi-Rong

    2016-12-28

    The aim of the present study was to validate the usefulness of the new octapolar multifrequency bioelectrical impedance analysis (BIA) for assessment of appendicular skeletal muscle mass (ASM) by comparing it with that of dual-energy X-ray absorptiometry (DXA) and to investigate the prevalence of sarcopenia in Chinese community-dwelling elderly according to Asian Working Group for Sarcopenia (AWGS) definition. A cross-sectional study was conducted in communities of Chengdu, China. A total of 944 community-dwelling elderly adults aged ≥60 years were included. ASM was measured by using DXA as a criterion method to validate a standing eight-electrode multifrequency BIA (InBody 720), followed by a further estimation of the prevalence of sarcopenia according the AWGS definition. In the Bland-Altman analysis, no significant difference was found between DXA and BIA based on the ASM measurements. The prevalence of AWGS-defined sarcopenia was 12.5% in the elderly women and 8.2% in the elderly men. BIA is suitable for body composition monitoring (ASM) in elderly Chinese as a fast, noninvasive, and convenient method; therefore, it may be a better choice in large epidemiological studies in the Chinese population. The prevalence of AWGS-defined sarcopenia was approximately 10.4% and increased with age in the Chinese community-dwelling elderly in this study.

  19. The accuracy of hand-to-hand bioelectrical impedance analysis in predicting body composition in college-age female athletes.

    Science.gov (United States)

    Esco, Michael R; Olson, Michele S; Williford, Henry N; Lizana, Suheil N; Russell, Angela R

    2011-04-01

    The purpose of this investigation was to determine the accuracy of hand-to-hand bioelectrical impedance analysis (BIA) for estimating body composition in college-age female athletes using dual-energy X-ray absorptiometry (DEXA) as the criterion measure. Forty National Association for Intercollegiate Athletics college female athletes volunteered to participate in this study. For each participant, total body fat percentage (BF%) and fat-free mass (FFM) were obtained via BIA and DEXA. The mean BF% and FFM values obtained by BIA were compared with the criterion DEXA measure. The DEXA strongly correlated to the BIA for BF% (r = 0.74, R2 = 0.55, SEE = 3.60, and p < 0.01) and FFM (r = 0.84, R2 = 0.71, SEE = 2.45, p < 0.01). However, when compared with the DEXA, the mean values for BIA were significantly lower for BF% (DEXA = 27.6 ± 5.3%, BIA = 22.5 ± 3.5%, p < 0.01) and higher for FFM (DEXA = 47.2 ± 4.5 kg, BIA = 50.6 ± 4.6 kg, p < 0.01). The results of this investigation indicate that hand-to-hand BIA significantly underestimates BF% and overestimated FFM in college-age female athletes when compared with the criterion DEXA. Practitioners should use caution when analyzing body composition with hand-held BIA in a population of athletic women.

  20. Bioelectrical impedance spectroscopy as a fluid management system in heart failure.

    Science.gov (United States)

    Weyer, Sören; Zink, Matthias Daniel; Wartzek, Tobias; Leicht, Lennart; Mischke, Karl; Vollmer, Thomas; Leonhardt, Steffen

    2014-06-01

    Episodes of hospitalization for heart failure patients are frequent and are often accompanied by fluid accumulations. The change of the body impedance, measured by bioimpendace spectroscopy, is an indicator of the water content. The hypothesis was that it is possible to detect edema from the impedance data. First, a finite integration technique was applied to test the feasibility and allowed a theoretical analysis of current flows through the body. Based on the results of the simulations, a clinical study was designed and conducted. The segmental impedances of 25 patients suffering from heart failure were monitored over their recompensation process. The mean age of the patients was 73.8 and their mean body mass index was 28.6. From these raw data the model parameters from the Cole model were deduced by an automatic fitting algorithm. These model data were used to classify the edema status of the patient. The baseline values of the regression lines of the extra- and intracellular resistance from the transthoracic measurement and the baseline value of the regression line of the extracellular resistance from the foot-to-foot measurement were identified as important parameters for the detection of peripheral edema. The rate of change of the imaginary impedance at the characteristic frequency and the mean intracellular resistance from the foot-to-foot measurement were identified as important parameters for the detection of pulmonary edema. To classify the data, two decision trees were considered: One should detect pulmonary edema (n(pulmonary) = 13, n(none) = 12) and the other peripheral edema (n(peripheral) = 12, n(none) = 13). Peripheral edema could be detected with a sensitivity of 100% and a specificity of 90%. The detection of pulmonary edema showed a sensitivity of 92.31% and a specificity of 100%. The leave-one-out cross-validation-error for the peripheral edema detection was 12% and 8% for the detection of pulmonary edema. This enables the application of BIS as

  1. Validity of Standing Posture Eight-electrode Bioelectrical Impedance to Estimate Body Composition in Taiwanese Elderly

    Directory of Open Access Journals (Sweden)

    Ling-Chun Lee

    2014-09-01

    Conclusion: The results of this study showed that the impedance index and LST in the whole body, upper limbs, and lower limbs derived from DXA findings were highly correlated. The LST and BF% estimated by BIA8 in whole body and various body segments were highly correlated with the corresponding DXA results; however, BC-418 overestimates the participants' appendicular LST and underestimates whole body BF%. Therefore, caution is needed when interpreting the results of appendicular LST and whole body BF% estimated for elderly adults.

  2. The performance of integrated transconductance amplifiers as variable current sources for bio-electric impedance measurements.

    Science.gov (United States)

    Smith, D N

    1992-01-01

    Multiple applied current impedance measurement systems require numbers of current sources which operate simultaneously at the same frequency and within the same phase but at variable amplitudes. Investigations into the performance of some integrated operational transconductance amplifiers as variable current sources are described. Measurements of breakthrough, non-linearity and common-mode output levels for LM13600, NE5517 and CA3280 were carried out. The effects of such errors on the overall performance and stability of multiple current systems when driving floating loads are considered.

  3. The investigation of the some body parameters of obese and (obese+diabetes) patients with using bioelectrical impedance analysis techniques

    Science.gov (United States)

    Yerlikaya, Emrah; Karageçili, Hasan; Aydin, Ruken Zeynep

    2016-04-01

    Obesity is a key risk for the development of hyperglycemia, hypertension, hyperlipidemia, insulin resistance and is totally referred to as the metabolic disorders. Diabetes mellitus, a metabolic disorder, is related with hyperglycemia, altered metabolism of lipids, carbohydrates and proteins. The minimum defining characteristic feature to identify diabetes mellitus is chronic and substantiated elevation of circulating glucose concentration. In this study, it is aimed to determine the body composition analyze of obese and (obese+diabetes) patients.We studied the datas taken from three independent groups with the body composition analyzer instrument. The body composition analyzer calculates body parameters, such as body fat ratio, body fat mass, fat free mass, estimated muscle mass, and base metabolic rate on the basis of data obtained by Dual Energy X-ray Absorptiometry using Bioelectrical Impedance Analysis. All patients and healthy subjects applied to Siirt University Medico and their datas were taken. The Statistical Package for Social Sciences version 21 was used for descriptive data analysis. When we compared and analyzed three groups datas, we found statistically significant difference between obese, (obese+diabetes) and control groups values. Anova test and tukey test are used to analyze the difference between groups and to do multiple comparisons. T test is also used to analyze the difference between genders. We observed the statistically significant difference in age and mineral amount peducation level among the illiterate and university graduates; fat mass kg, fat percentage, internal lubrication, body mass index, water percentage, protein mass percentage, mineral percentage p<0.05, significant statistically difference were observed. This difference especially may result of a sedentary lifestyle.

  4. Phase angle assessment by bioelectrical impedance analysis and its predictive value for malnutrition risk in hospitalized geriatric patients.

    Science.gov (United States)

    Varan, Hacer Dogan; Bolayir, Basak; Kara, Ozgur; Arik, Gunes; Kizilarslanoglu, Muhammet Cemal; Kilic, Mustafa Kemal; Sumer, Fatih; Kuyumcu, Mehmet Emin; Yesil, Yusuf; Yavuz, Burcu Balam; Halil, Meltem; Cankurtaran, Mustafa

    2016-12-01

    Phase angle (PhA) value determined by bioelectrical impedance analysis (BIA) is an indicator of cell membrane damage and body cell mass. Recent studies have shown that low PhA value is associated with increased nutritional risk in various group of patients. However, there have been only a few studies performed globally assessing the relationship between nutritional risk and PhA in hospitalized geriatric patients. The aim of the study is to evaluate the predictive value of the PhA for malnutrition risk in hospitalized geriatric patients. One hundred and twenty-two hospitalized geriatric patients were included in this cross-sectional study. Comprehensive geriatric assessment tests and BIA measurements were performed within the first 48 h after admission. Nutritional risk state of the patients was determined with NRS-2002. Phase angle values of the patients with malnutrition risk were compared with the patients that did not have the same risk. The independent variables for predicting malnutrition risk were determined. SPSS version 15 was utilized for the statistical analyzes. The patients with malnutrition risk had significantly lower phase angle values than the patients without malnutrition risk (p = 0.003). ROC curve analysis suggested that the optimum PhA cut-off point for malnutrition risk was 4.7° with 79.6 % sensitivity, 64.6 % specificity, 73.9 % positive predictive value, and 73.9 % negative predictive value. BMI, prealbumin, PhA, and Mini Mental State Examination Test scores were the independent variables for predicting malnutrition risk. PhA can be a useful, independent indicator for predicting malnutrition risk in hospitalized geriatric patients.

  5. Bias and limits of agreement between hydrodensitometry, bioelectrical impedance and skinfold calipers measures of percentage body fat.

    Science.gov (United States)

    Williams, C A; Bale, P

    1998-02-01

    Previous research has often used correlations as a statistical method to show agreement; however, this is not a valid use of the statistic. The purpose of this study was to investigate the bias and limits of agreement for three methods of estimating percentage body fat for 117 male and 114 female university athletes: hydrodensitometry (HYD), bioelectrical impedance (BIA) and skinfold calipers (SKF). The mean (SD) percentage body fat for males as assessed by HYD, BIA and SKF methods, respectively, were 13.2 (3.3)%, 14.1, (3.3)% and 13.0 (3.2)%. Female body fat measurements were 22.5 (3.9)%, 23.7 (4.3)% and 23.8 (4.2)%, respectively. Pearson product moment correlations for male and female body fat percentages between the three methods were high, ranging from 0.81 to 0.86 (P < 0.05). However, compared to the criterion measure of body fat percentage (HYD), the magnitude of agreement BIA and SKF revealed a different pattern. The mean absolute difference between HYD and BIA measurements of body fat for males was -0.8 (2.0)% fat, and between HYD and SKF was it was 0.2 (1.7)% fat. The mean absolute difference for females between HYD and BIA was -1.2 (2.5)%; for HYD and SKF it was -1.4 (2.2)%. Compared to the HYD measures for males and females, the BIA and SKF measures were as much as a 3.8% underestimation and a 6.2% overestimation of body fat. This study provides evidence that the strength of a correlation does not indicate agreement between two methods. In future, reliability and validity studies should examine the absolute differences between two variables and calculate limits of agreement around which a practitioner can appreciate the precision of the methodologies.

  6. Reliability of Calf Bioelectrical Impedance Spectroscopy and Magnetic-Resonance-Imaging-Acquired Skeletal Muscle Hydration Measures in Healthy People

    Directory of Open Access Journals (Sweden)

    Anuradha Sawant

    2013-01-01

    Full Text Available Purpose. The purpose of this study was to investigate the test-retest reliability, relative variability, and agreement between calf bioelectrical impedance-spectroscopy (cBIS acquired extracellular fluid (ECF, intracellular fluid (ICF, total water and the ratio of ECF : ICF, magnetic-resonance-imaging (MRI acquired transverse relaxation times (T2, and apparent diffusion coefficient (ADC of calf muscles of the same segment in healthy individuals. Methods. Muscle hydration measures were collected in 32 healthy individuals on two occasions and analyzed by a single rater. On both occasions, MRI measures were collected from tibialis anterior (TA, medial (MG, and lateral gastrocnemius (LG and soleus muscles following the cBIS data acquired using XiTRON Hydra 4200 BIS device. The intraclass correlation coefficients (ICC2,1, coefficient of variation (CV, and agreement between MRI and cBIS data were also calculated. Results. ICC2,1 values for cBIS, T2, and ADC ranged from 0.56 to 0.92, 0.96 to 0.99, and 0.05 to 0.56, respectively. Relative variability between measures (CV ranged from 14.6 to 25.6% for the cBIS data and 4.2 to 10.0% for the MRI-acquired data. The ratio of ECF : ICF could significantly predict T2 of TA and soleus muscles. Conclusion. MRI-acquired measures of T2 had the highest test-retest reliability of muscle hydration with the least error and variation on repeated testing. Hence, T2 of a muscle is the most reliable and stable outcome measure for evaluating individual muscle hydration.

  7. Comparison of Standing Posture Bioelectrical Impedance Analysis with DXA for Body Composition in a Large, Healthy Chinese Population

    Science.gov (United States)

    Chen, Kuen-Tsann; Chen, Yu-Yawn; Wang, Chia-Wei; Chuang, Chih-Lin; Chiang, Li-Ming; Lai, Chung-Liang; Lu, Hsueh-Kuan; Dwyer, Gregory B.; Chao, Shu-Ping; Shih, Ming-Kuei; Hsieh, Kuen-Chang

    2016-01-01

    Bioelectrical impedance analysis (BIA) is a common method for assessing body composition in research and clinical trials. BIA is convenient but when compared with other reference methods, the results have been inconclusive. The level of obesity degree in subjects is considered to be an important factor affecting the accuracy of the measurements. A total of 711 participants were recruited in Taiwan and were sub-grouped by gender and levels of adiposity. Regression analysis and Bland-Altman analysis were used to evaluate the agreement of the measured body fat percentage (BF%) between BIA and DXA. The BF% measured by the DXA and BIA methods (Tanita BC-418) were expressed as BF%DXA and BF%BIA8, respectively. A one-way ANOVA was used to test the differences in BF% measurements by gender and levels of adiposity. The estimated BF%BIA8 and BF%DXA in the all subjects, male and female groups were all highly correlated (r = 0.934, 0.901, 0.916, all P< 0.001). The average estimated BF%BIA8 (22.54 ± 9.48%) was significantly lower than the average BF%DXA (26.26 ± 11.18%). The BF%BIA8 was overestimated in the male subgroup (BF%DXA< 15%), compared to BF%DXA by 0.45%, respectively. In the other subgroups, the BF%BIA8 values were all underestimated. Standing BIA estimating body fat percentage in Chinese participants have a high correlation, but underestimated on normal and high obesity degree in both male and female subjects. PMID:27467065

  8. Preliminary bioelectrical impedance analysis (BIA) equation for body composition assessment in young females from Colombia

    Science.gov (United States)

    Caicedo-Eraso, J. C.; González-Correa, C. H.; González-Correa, C. A.

    2013-04-01

    A previous study showed that reported BIA equations for body composition are not suitable for Colombian population. The purpose of this study was to develop and validate a preliminary BIA equation for body composition assessment in young females from Colombia, using hydrodensitometry as reference method. A sample of 30 young females was evaluated. Inclusion and exclusion criteria were defined to minimize the variability of BIA. Height, weight, BIA, residual lung volume (RV) and underwater weight (UWW) were measured. A preliminary BIA equation was developed (r2 = 0.72, SEE = 2.48 kg) by stepwise multiple regression with fat-free mass (FFM) as dependent variable and weight, height and impedance measurements as independent variables. The quality of regression was evaluated and a cross-validation against 50% of sample confirmed that results obtained with the preliminary BIA equation is interchangeable with results obtained with hydrodensitometry (r2 = 0.84, SEE = 2.62 kg). The preliminary BIA equation can be used for body composition assessment in young females from Colombia until a definitive equation is developed. The next step will be increasing the sample, including a second reference method, as deuterium oxide dilution (D2O), and using multi-frequency BIA (MF-BIA). It would also be desirable to develop equations for males and other ethnic groups in Colombia.

  9. Comparison of body fat in Brazilian adult females by bioelectrical impedance analysis

    Science.gov (United States)

    Altamir, Vaz; Frère, Slaets Annie France; Ramírez Leonardo, López

    2012-12-01

    Body-fat is essential for human body, provided that its amount is at healthy levels. If in-excess body-fat is deleterious, its lack is otherwise also harmful. Estimated percent body-fat performed with commercially available devices measuring bioimpedance have many advantages, such as easy measurement and low cost. However, these measurements are based on standard models and equations that are not disclosed by manufacturers, and this leads to questioning the validity of these estimates for Brazilian females. The aim of this study was to compare electrical tetrapolar and octapolar impedance results obtained with commercially available equipment: Maltron BF-906 and OMRON 510-W. Data analysis involved descriptive and inferential statistics. Devices used in this study to estimate body fat quantity have not shown any significant differences in results; this is a major issue when selecting equipment based on three factors: study focus, available financial resources, and target population. Results obtained from the two devices have not shown any significant differences, which lead to the conclusion that either device may be reliably used.

  10. Foot-to-foot bioelectrical impedance accurately tracks direction of adiposity change in overweight and obese 7- to 13-year-old children.

    Science.gov (United States)

    Kasvis, Popi; Cohen, Tamara R; Loiselle, Sarah-Ève; Kim, Nicolas; Hazell, Tom J; Vanstone, Catherine A; Rodd, Celia; Plourde, Hugues; Weiler, Hope A

    2015-03-01

    Body composition measurements are valuable when evaluating pediatric obesity interventions. We hypothesized that foot-to-foot bioelectrical impedance analysis (BIA) will accurately track the direction of adiposity change, but not magnitude, in part due to differences in fat patterning. The purposes of this study were to examine the accuracy of body composition measurements of overweight and obese children over time using dual-energy x-ray absorptiometry (DXA) and BIA and to determine if BIA accuracy was affected by fat patterning. Eighty-nine overweight or obese children (48 girls, 41 boys, age 7-13 years) participating in a randomized controlled trial providing a family-centered, lifestyle intervention, underwent DXA and BIA measurements every 3 months. Bland-Altman plots showed a poor level of agreement between devices for baseline percent body fat (%BF; mean, 0.398%; +2SD, 8.685%; -2SD, -7.889%). There was overall agreement between DXA and BIA in the direction of change over time for %BF (difference between visits 3 and 1: DXA -0.8 ± 0.5%, BIA -0.7 ± 0.5%; P = 1.000) and fat mass (FM; difference between visits 3 and 1: DXA 0.7 ± 0.5 kg, BIA 0.6 ± 0.5 kg; P = 1.000). Bioelectrical impedance analysis measurements of %BF and FM at baseline were significantly different in those with android and gynoid fat (%BF: 35.9% ± 1.4%, 32.2% ± 1.4%, P < .003; FM: 20.1 ± 0.8 kg, 18.4 ± 0.8, P < .013). Bioelectrical impedance analysis accurately reports the direction of change in FM and FFM in overweight and obese children; inaccuracy in the magnitude of BIA measurements may be a result of fat patterning differences.

  11. Performance of Two Bioelectrical Impedance Analyses in the Diagnosis of Overweight and Obesity in Children and Adolescents: The FUPRECOL Study

    Science.gov (United States)

    Ramírez-Vélez, Robinson; Correa-Bautista, Jorge Enrique; Martínez-Torres, Javier; González-Ruíz, Katherine; González-Jiménez, Emilio; Schmidt-RioValle, Jacqueline; Garcia-Hermoso, Antonio

    2016-01-01

    This study aimed to determine thresholds for percentage of body fat (BF%) corresponding to the cut-off values for overweight/obesity as recommended by the International Obesity Task Force (IOTF), using two bioelectrical impedance analyzers (BIA), and described the likelihood of increased cardiometabolic risk in our cohort defined by the IOTF and BF% status. Participants included 1165 children and adolescents (54.9% girls) from Bogotá (Colombia). Body mass index (BMI) was calculated from height and weight. BF% of each youth was assessed first using the Tanita BC-418® followed by a Tanita BF-689®. The sensitivity and specificity of both devices and their ability to correctly classify children as overweight/obesity (≥2 standard deviation), as defined by IOTF, was investigated using receiver operating characteristic (ROC) by sex and age groups (9–11, 12–14, and 13–17 years old); Area under curve (AUC) values were also reported. For girls, the optimal BF% threshold for classifying into overweight/obesity was found to be between 25.2 and 28.5 (AUC = 0.91–0.97) and 23.9 to 26.6 (AUC = 0.90–0.99) for Tanita BC-418® and Tanita BF-689®, respectively. For boys, the optimal threshold was between 16.5 and 21.1 (AUC = 0.93–0.96) and 15.8 to 20.6 (AUC = 0.92–0.94) by Tanita BC-418® and Tanita BF-689®, respectively. All AUC values for ROC curves were statistically significant and there were no differences between AUC values measured by both BIA devices. The BF% values associated with the IOTF-recommended BMI cut-off for overweight/obesity may require age- and sex-specific threshold values in Colombian children and adolescents aged 9–17 years and could be used as a surrogate method to identify individuals at risk of excess adiposity. PMID:27782039

  12. Performance of Two Bioelectrical Impedance Analyses in the Diagnosis of Overweight and Obesity in Children and Adolescents: The FUPRECOL Study

    Directory of Open Access Journals (Sweden)

    Robinson Ramírez-Vélez

    2016-10-01

    Full Text Available This study aimed to determine thresholds for percentage of body fat (BF% corresponding to the cut-off values for overweight/obesity as recommended by the International Obesity Task Force (IOTF, using two bioelectrical impedance analyzers (BIA, and described the likelihood of increased cardiometabolic risk in our cohort defined by the IOTF and BF% status. Participants included 1165 children and adolescents (54.9% girls from Bogotá (Colombia. Body mass index (BMI was calculated from height and weight. BF% of each youth was assessed first using the Tanita BC-418® followed by a Tanita BF-689®. The sensitivity and specificity of both devices and their ability to correctly classify children as overweight/obesity (≥2 standard deviation, as defined by IOTF, was investigated using receiver operating characteristic (ROC by sex and age groups (9–11, 12–14, and 13–17 years old; Area under curve (AUC values were also reported. For girls, the optimal BF% threshold for classifying into overweight/obesity was found to be between 25.2 and 28.5 (AUC = 0.91–0.97 and 23.9 to 26.6 (AUC = 0.90–0.99 for Tanita BC-418® and Tanita BF-689®, respectively. For boys, the optimal threshold was between 16.5 and 21.1 (AUC = 0.93–0.96 and 15.8 to 20.6 (AUC = 0.92–0.94 by Tanita BC-418® and Tanita BF-689®, respectively. All AUC values for ROC curves were statistically significant and there were no differences between AUC values measured by both BIA devices. The BF% values associated with the IOTF-recommended BMI cut-off for overweight/obesity may require age- and sex-specific threshold values in Colombian children and adolescents aged 9–17 years and could be used as a surrogate method to identify individuals at risk of excess adiposity.

  13. [Variability in bioelectrical impedance assessment of body composition depending on measurement conditions: influence of fast and rest].

    Science.gov (United States)

    Cáceres, Diana Isabel; Sartor-Messagi, Monique; Rodríguez, Diego Agustín; Escalada, Ferran; Gea, Joaquim; Orozco-Levi, Mauricio; Marco, Ester

    2014-12-01

    Bioelectrical Impedance Assessment (BIA) is one of the main tools to measure body composition. BIA is recommended in fasting and after 60 minutes of rest; however, this cannot always be guaranteed in healthcare practice. To establish the reliability of the body composition parameters assessed with BIA under different physiological conditions: fast + rest, fast + no-rest and no-fast + no-rest in healthy volunteers. Transversal study including 25 healthy volunteers aged 18-34 (12 men, 13 women). A BIA was performed under three different conditions: 1) fast + 60 minute rest in cubito supino (gold standard), 2) fast + no rest and 3) no fast + no rest. The collected parameters were: lean mass and fat mass (Kg) and body water (in liters and as body weight percentage). The intraclass correlation coefficient (ICC) was applied for the assessment of concordance within the different measurements. Compared to the gold standard, the difference in lean mass means in the condition of fast + no-rest, was -0.15 (DE 1.44) in men and 0.98 (DE 1.36) in women; fat mass decreased in 0.06 (DE 1.55) in men and 0.82 (DE 1.5) in women; ICC ranged between 0.826-0.995 in all comparisons. In the condition of no-fast + no rest, lean mass decreased an average of 0.05 (DE 0.33) in men and it increased 0.62 (DE 0.46) in women; fat mass decreased 0.57 (DE 0.82) in men and 0.46 (DE 0.60) in women; ad ICC ranged between 0.942 and 0.999, except in body water in men, where it was 0.340. Although relevant, the differences observed in parameters from BIA when comparing the gold standard condition (fast + rest) with the other conditions (fast + no-rest and no-fast + no-rest) are of little magnitude. In clinical practice, the assessment of body composition allows to take decisions when planning treatment for patients with a poor physical condition. The reliability of the parameters acquired via BIA within different physiological conditions of fast and rest is excellent (CCI >0.75) in healthy adults aged 19

  14. Hand-to-Hand Model for Bioelectrical Impedance Analysis to Estimate Fat Free Mass in a Healthy Population

    Directory of Open Access Journals (Sweden)

    Hsueh-Kuan Lu

    2016-10-01

    Full Text Available This study aimed to establish a hand-to-hand (HH model for bioelectrical impedance analysis (BIA fat free mass (FFM estimation by comparing with a standing position hand-to-foot (HF BIA model and dual energy X-ray absorptiometry (DXA; we also verified the reliability of the newly developed model. A total of 704 healthy Chinese individuals (403 men and 301 women participated. FFM (FFMDXA reference variables were measured using DXA and segmental BIA. Further, regression analysis, Bland–Altman plots, and cross-validation (2/3 participants as the modeling group, 1/3 as the validation group; three turns were repeated for validation grouping were conducted to compare tests of agreement with FFMDXA reference variables. In male participants, the hand-to-hand BIA model estimation equation was calculated as follows: FFMmHH = 0.537 h2/ZHH − 0.126 year + 0.217 weight + 18.235 (r2 = 0.919, standard estimate of error (SEE = 2.164 kg, n = 269. The mean validated correlation coefficients and limits of agreement (LOAs of the Bland–Altman analysis of the calculated values for FFMmHH and FFMDXA were 0.958 and −4.369–4.343 kg, respectively, for hand-to-foot BIA model measurements for men; the FFM (FFMmHF and FFMDXA were 0.958 and −4.356–4.375 kg, respectively. The hand-to-hand BIA model estimating equation for female participants was FFMFHH = 0.615 h2/ZHH − 0.144 year + 0.132 weight + 16.507 (r2 = 0.870, SEE = 1.884 kg, n = 201; the three mean validated correlation coefficient and LOA for the hand-to-foot BIA model measurements for female participants (FFMFHH and FFMDXA were 0.929 and −3.880–3.886 kg, respectively. The FFMHF and FFMDXA were 0.942 and −3.511–3.489 kg, respectively. The results of both hand-to-hand and hand-to-foot BIA models demonstrated similar reliability, and the hand-to-hand BIA models are practical for assessing FFM.

  15. 基于FPGA的生物电阻抗成像系统设计%Design of bioelectrical electrical impedance tomography system based on FPGA

    Institute of Scientific and Technical Information of China (English)

    丁忠林; 陈晓艳; 吴佳妮

    2012-01-01

    According to requirements of electrical impedance tomography, the 16 electrode bioelectrical electrical impedance system was designed in this paper, which embedded 8 bits microprocessor PicoBlaze to realize logic control for generating excitation signals and high-speed A/D acquisition, realization of digital demodulation and the data was be transferred to PC through RS232, redraw the human body resistivity distribution or change images .The system provides a very good hardware design scheme for widely research of electrical impedance tomography.%根据电阻抗断层成像技术要求,设计了以Spartan3E系列XC3S500E FPGA为核心的16电极生物电阻抗成像系统,系统嵌入8 bit微处理器PicoBlaze实现逻辑控制并产生激励信号实现高速A/D采集及实现数字解调,通过RS232将采集数据传输到PC机,重建人体内部的电阻率分布或其变化图像.为广泛应用研究电阻抗断层成像技术提供一种硬件设计方案.

  16. Multi-frequency bioelectrical impedance: a comparison between the Cole-Cole modelling and Hanai equations with the classical impedance index approach.

    Science.gov (United States)

    Deurenberg, P; Andreoli, A; de Lorenzo, A

    1996-01-01

    Total body water and extracellular water were measured by deuterium oxide and bromide dilution respectively in 23 healthy males and 25 healthy females. In addition, total body impedance was measured at 17 frequencies, ranging from 1 kHz to 1350 kHz. Modelling programs were used to extrapolate impedance values to frequency zero (extracellular resistance) and frequency infinity (total body water resistance). Impedance indexes (height2/Zf) were computed at all 17 frequencies. The estimation errors of extracellular resistance and total body water resistance were 1% and 3%, respectively. Impedance and impedance index at low frequency were correlated with extracellular water, independent of the amount of total body water. Total body water showed the greatest correlation with impedance and impedance index at high frequencies. Extrapolated impedance values did not show a higher correlation compared to measured values. Prediction formulas from the literature applied to fixed frequencies showed the best mean and individual predictions for both extracellular water and total body water. It is concluded that, at least in healthy individuals with normal body water distribution, modelling impedance data has no advantage over impedance values measured at fixed frequencies, probably due to estimation errors in the modelled data.

  17. Wearable Multi-Frequency and Multi-Segment Bioelectrical Impedance Spectroscopy for Unobtrusively Tracking Body Fluid Shifts during Physical Activity in Real-Field Applications: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Federica Villa

    2016-05-01

    Full Text Available Bioelectrical Impedance Spectroscopy (BIS allows assessing the composition of body districts noninvasively and quickly, potentially providing important physiological/clinical information. However, neither portable commercial instruments nor more advanced wearable prototypes simultaneously satisfy the demanding needs of unobtrusively tracking body fluid shifts in different segments simultaneously, over a broad frequency range, for long periods and with high measurements rate. These needs are often required to evaluate exercise tests in sports or rehabilitation medicine, or to assess gravitational stresses in aerospace medicine. Therefore, the aim of this work is to present a new wearable prototype for monitoring multi-segment and multi-frequency BIS unobtrusively over long periods. Our prototype guarantees low weight, small size and low power consumption. An analog board with current-injecting and voltage-sensing electrodes across three body segments interfaces a digital board that generates square-wave current stimuli and computes impedance at 10 frequencies from 1 to 796 kHz. To evaluate the information derivable from our device, we monitored the BIS of three body segments in a volunteer before, during and after physical exercise and postural shift. We show that it can describe the dynamics of exercise-induced changes and the effect of a sit-to-stand maneuver in active and inactive muscular districts separately and simultaneously.

  18. Analysis of different device-based intrathoracic impedance vectors for detection of heart failure events (from the Detect Fluid Early from Intrathoracic Impedance Monitoring study).

    Science.gov (United States)

    Heist, E Kevin; Herre, John M; Binkley, Philip F; Van Bakel, Adrian B; Porterfield, James G; Porterfield, Linda M; Qu, Fujian; Turkel, Melanie; Pavri, Behzad B

    2014-10-15

    Detect Fluid Early from Intrathoracic Impedance Monitoring (DEFEAT-PE) is a prospective, multicenter study of multiple intrathoracic impedance vectors to detect pulmonary congestion (PC) events. Changes in intrathoracic impedance between the right ventricular (RV) coil and device can (RVcoil→Can) of implantable cardioverter-defibrillators (ICDs) and cardiac resynchronization therapy ICDs (CRT-Ds) are used clinically for the detection of PC events, but other impedance vectors and algorithms have not been studied prospectively. An initial 75-patient study was used to derive optimal impedance vectors to detect PC events, with 2 vector combinations selected for prospective analysis in DEFEAT-PE (ICD vectors: RVring→Can + RVcoil→Can, detection threshold 13 days; CRT-D vectors: left ventricular ring→Can + RVcoil→Can, detection threshold 14 days). Impedance changes were considered true positive if detected heart failure events. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Body composition of adult cystic fibrosis patients and control subjects as determined by densitometry, bioelectrical impedance, total-body electrical conductivity, skinfold measurements, and deuterium oxide dilution

    Energy Technology Data Exchange (ETDEWEB)

    Newby, M.J.; Keim, N.L.; Brown, D.L. (Univ. of California, Davis (USA))

    1990-08-01

    This study contrasts body compositions (by six methods) of eight cystic fibrosis (CF) subjects with those of eight control subjects matched for age, height, and sex. CF subjects weighed 84% as much as control subjects. Densitometry and two bioelectrical impedance-analysis methods suggested that reduced CF weights were due to less lean tissue (10.7, 9.5, and 10.4 kg). Total-body electrical conductivity (TOBEC) and skinfold-thickness measurements indicated that CF subjects were leaner than control subjects and had less fat (5.4 and 3.6 kg) and less lean (5.2 and 7 kg) tissue. D2O dilution showed a pattern similar to TOBEC (8.3 kg less lean, 2.7 kg less fat tissue). Densitometry estimates of fat (mass and percent) were not correlated (r less than 0.74, p greater than 0.05) with any other method for CF subjects but were correlated with all other methods for control subjects. CF subjects contained less fat and lean tissue than did control subjects. Densitometry by underwater weighing is unsuitable for assessing body composition of CF patients.

  20. Body composition by bioelectrical-impedance analysis compared with deuterium dilution and skinfold anthropometry in patients with chronic obstructive pulmonary disease

    Energy Technology Data Exchange (ETDEWEB)

    Schols, A.M.; Wouters, E.F.; Soeters, P.B.; Westerterp, K.R. (Univ. of Limburg, Maastricht (Netherlands))

    1991-02-01

    Body composition is an important measure of nutritional status in patients with chronic obstructive pulmonary disease (COPD). We generated a regression model for bioelectrical impedance (BI) by using deuterium dilution (2H2O) as a reference method in 32 COPD patients, aged 63 +/- 9 y (mean +/- SD), in stable pulmonary and cardiac condition. Height squared divided by resistance (Ht2/Res) correlated well with total body water (TBW) as measured by 2H2O (r = 0.93, P less than 0.001, SEE = 1.9 L). The best-fitting regression equation to predict TBW comprised Ht2/Res and body weight (r2 = 0.89, SEE = 1.8 L, P less than 0.001). BI-predicted TBW was used to estimate BI-fat-free mass (FFM) that was compared with skinfold-thickness-based FFM predictions (Anthr-FFM). Relative to BI-FFM a significant overestimation of 4.4 +/- 0.8 kg was found by Anthr-FFM. Our results suggest that BI is a useful measure of body composition in patients with severe COPD.

  1. Body fat measurements in elite adolescent volleyball players: correlation between skinfold thickness, bioelectrical impedance analysis, air-displacement plethysmography, and body mass index percentiles.

    Science.gov (United States)

    Portal, Shawn; Rabinowitz, Jonathan; Adler-Portal, Dana; Burstein, Ruty Pilz; Lahav, Yair; Meckel, Yoav; Nemet, Dan; Eliakim, Alon

    2010-04-01

    Determination of body composition is an essential parameter in training athletes because low fat-muscle ratio might improve physical performance in many types of sports. Since training is often conducted in the field, it is important to determine whether simple field measurements of body composition assessment correlate with laboratory measurements. Examine the correlation of body fat content as measured using skinfold thicknesses (SF), air-displacement plethysmography (BOD POD), bioelectrical impedance analysis (BIA) and body mass index (BMI) age and gender adjusted percentiles. Body mass as measured by SF, BOD POD, BIA, and BMI percentiles were examined in 29 elite, national team level, male and female volleyball players (age range 13 to 18) at the beginning of the training season. Body fat percent measured by SF, BIA and BOD POD were highly positively correlated (r > 0.83). Measurements of body fat by SF, BIA and BOD POD were weakly correlated with BMI percentiles (r < 0.45). Results suggest that BMI percentile is not a good measure for body fat in adolescent elite male and female volleyball players. SF and measurements of body composition by BIA and BOD POD are essentially interchangeable.

  2. BODY COMPOSITION OF YOUNG PEOPLE AGED 17-18 YEARS, PRACTICING AND NOT PRACTICING SWIMMING, WITH THE USE OF THE BIOELECTRICAL IMPEDANCE METHOD

    Directory of Open Access Journals (Sweden)

    Jendrysek Marek

    2015-11-01

    Full Text Available Purpose: Body composition evaluation of youth aged 17-18 of a different physical activity with the help of bioelectric impedance method. Material and Methods: 18 boys practicing swimming and 19 boys not practicing it took part in the study, making up a control group. Height, weight, BMI, lean body mass, the content of fat and water, Rohr factor were evaluated. Non-parametric Mann-Whitney test has been used to evaluate the differences in the range of the tissue components between the two groups. Results: Statistically significant differences were found on the p<0,05 level in % fat content. Mean body weight in experimental group was 71.5 kg, while in control group it was 69.4 kg. Minimum and maximum weight in group of swimming-practicing persons was: 56.6-92.2 kg. Increased body weight in the group of swimmers can result from greater amount of active tissue in this group compared with persons of low physical activity. Proportionally, it amounted to 64.3 kg and 61.3 kg. In the tested groups, minimal and maximal values of amount of active tissue proportionately amounted to: 54.1-78 and 49.5-72,3 kg. Conclusions: Physical activity modifies body composition. Active lifestyle is one of the methods for prevention of overweight and obesity.

  3. Prediction of fat-free mass and percentage of body fat in neonates using bioelectrical impedance analysis and anthropometric measures: validation against the PEA POD.

    Science.gov (United States)

    Lingwood, Barbara E; Storm van Leeuwen, Anne-Martine; Carberry, Angela E; Fitzgerald, Erin C; Callaway, Leonie K; Colditz, Paul B; Ward, Leigh C

    2012-05-01

    Accurate assessment of neonatal body composition is essential to studies investigating neonatal nutrition or developmental origins of obesity. Bioelectrical impedance analysis or bioimpedance analysis is inexpensive, non-invasive and portable, and is widely used in adults for the assessment of body composition. There are currently no prediction algorithms using bioimpedance analysis in neonates that have been directly validated against measurements of fat-free mass (FFM). The aim of the study was to evaluate the use of bioimpedance analysis for the estimation of FFM and percentage of body fat over the first 4 months of life in healthy infants born at term, and to compare these with estimations based on anthropometric measurements (weight and length) and with skinfolds. The present study was an observational study in seventy-seven infants. Body fat content of infants was assessed at birth, 6 weeks, 3 and 4·5 months of age by air displacement plethysmography, using the PEA POD body composition system. Bioimpedance analysis was performed at the same time and the data were used to develop and test prediction equations for FFM. The combination of weight+sex+length predicted FFM, with a bias of < 100 g and limits of agreement of 6-13 %. Before 3 months of age, bioimpedance analysis did not improve the prediction of FFM or body fat. At 3 and 4·5 months, the inclusion of impedance in prediction algorithms resulted in small improvements in prediction of FFM, reducing the bias to < 50 g and limits of agreement to < 9 %. Skinfold measurements performed poorly at all ages.

  4. Calibration of bioelectrical impedance analysis for body composition assessment in Ethiopian infants using air-displacement plethysmography

    DEFF Research Database (Denmark)

    Christensen, Rasmus Wibæk; Kæstel, Pernille; Skov, R.

    2015-01-01

    on BIA in 0- to 6-month-old Ethiopian infants. SUBJECTS/METHODS: The study comprised a total of 186 BC assessments performed in 101 healthy infants, delivered at Jimma University Specialized Hospital. Infant air-displacement plethysmography (IADP) was the criterion method, whereas weight, length, sex...... by IADP, with an adjusted R(2) and root mean square error (RMSE) of 0.94 and 200 g, respectively. Adding impedance index to the model resulted in a significantly improved model fit (R(2)=0.95; RMSE=181 g). For infants below 3 months of age, inclusion of impedance index did not contribute to an improved...... model fit for predicting FFM compared with a model already comprising weight, sex and age. CONCLUSIONS: The derived equations predicted FFM with acceptable accuracy and may be used in future field surveys, epidemiological studies and clinical trials conducted in similar sub-Saharan African population...

  5. Bioelectric impedance overestimates the body fat in overweight and underestimates in Brazilian obese women: a comparation with Segal equation 1

    OpenAIRE

    Pimentel, G. D.; Bernhard, A. B. [UNESP; M. R. P. Frezza; Rinaldi, A. E. M. [UNESP; Roberto Carlos BURINI

    2010-01-01

    Introduction: Overweight and obesity are risk factors to appearance of cardiovascular diseases and anthropometry is important as clinical tool for planning and health policymaking at population level. Thus, aim of this work was to compare the simple body fat percentage (%BF) obtained straight by bioeletric impedance (BIA) to the one obtained by the equation of Segal et al (1988), which uses the BIA resistance value, overweight among adult women.Methods: This study conducted with 86 adult wome...

  6. Effectiveness of thigh-to-thigh current path for the measurement of abdominal fat in bioelectrical impedance analysis.

    Science.gov (United States)

    Hong, Ki Hwan; Lim, Yong Gyu; Park, Kwang Suk

    2009-12-01

    We present a new method measuring body impedance using a thigh-to-thigh current path, which can reflect the abdominal fat portion more sensitively and can be conveniently applied during the daily use on a toilet seat. Two pairs of electrodes were installed on a toilet seat to provide current and to permit voltage measurement through a thigh-to-thigh current path. The effectiveness of the method was compared with conventional foot-to-foot and hand-to-foot current paths by simulation and by experiments referenced to computed tomography (CT) image analysis. Body impedance using three different current paths was measured, and abdominal CT images were acquired for eight subjects. Measured body impedances were compared with the visceral to subcutaneous fat ratio (VF/SF) calculated from the CT-determined abdominal fat volume. The thigh-to-thigh current path was about 75% more sensitive in abdominal fat measurement than the conventional current paths in simulation experiments and displayed a higher VF/SF correlation (r = 0.768) than the foot-to-foot (r = 0.425) and hand-to-foot (r = 0.497) current paths.

  7. 生物电阻抗技术研究进展%The Development of the Bioelectric Impedance Technologies

    Institute of Scientific and Technical Information of China (English)

    董秀珍

    2004-01-01

    本文从生物电阻抗血流图(bioimpedance rheohepatogram)、生物电阻抗测量(bioimpedance measurement)、生物组织阻抗频谱特性(bioimpedance spextroscopy)、生物电阻抗成像(electrical impedance imaging)等方面结合自己的研究工作,较全面地介绍并讨论了生物电阻抗技术的研究进展情况.

  8. Modeling alien-line impedance mismatch in wideband vectored wireline systems

    NARCIS (Netherlands)

    Medeiros, E.; Magesacher, T.; Ödling, P.; Wei, D.; Wang, X.; Li, Q.; Eriksson, P.E.; Lu, C.; Boschma, J.J.; Heuvel, B.M. van den

    2014-01-01

    Sudden changes of channel coefficients in a wideband vectored wireline system (such as G.fast) due to changes in the terminating impedance of lines outside the vectored group can seriously degrade stability and throughput. This letter presents a model that predicts the impact of termination mismatch

  9. Developing and Validating an Age-Independent Equation Using Multi-Frequency Bioelectrical Impedance Analysis for Estimation of Appendicular Skeletal Muscle Mass and Establishing a Cutoff for Sarcopenia.

    Science.gov (United States)

    Yamada, Yosuke; Nishizawa, Miyuki; Uchiyama, Tomoka; Kasahara, Yasuhiro; Shindo, Mikio; Miyachi, Motohiko; Tanaka, Shigeho

    2017-07-19

    Background: Appendicular skeletal muscle (or lean) mass (ALM) estimated using dual-energy X-ray absorptiometry (DXA) is considered to be a preferred method for sarcopenia studies. However, DXA is expensive, has limited portability, and requires radiation exposure. Bioelectrical impedance analysis (BIA) is inexpensive, easy to use, and portable; thus BIA might be useful in sarcopenia investigations. However, a large variety of models have been commercially supplied by different companies, and for most consumer products, the equations estimating ALM are not disclosed. It is therefore difficult to use these equations for research purposes. In particular, the BIA equation is often age-dependent, which leads to fundamental difficulty in examining age-related ALM loss. The aims of the current study were as follows: (1) to develop and validate an equation to estimate ALM using multi-frequency BIA (MF-BIA) based on theoretical models, and (2) to establish sarcopenia cutoff values using the equation for the Japanese population. Methods: We measured height (Ht), weight, and ALM obtained using DXA and a standing-posture 8-electrode MF-BIA (5, 50, 250 kHz) in 756 Japanese individuals aged 18 to 86-years-old (222 men and 301 women as developing equation group and 97 men and 136 women as a cross validation group). The traditional impedance index (Ht²/Z50) and impedance ratio of high and low frequency (Z250/Z₅) of hand to foot values were calculated. Multiple regression analyses were conducted with ALM as dependent variable in men and women separately. Results: We created the following equations: ALM = (0.6947 × (Ht²/Z50)) + (-55.24 × (Z250/Z₅)) + (-10,940 × (1/Z50)) + 51.33 for men, and ALM = (0.6144 × (Ht²/Z50)) + (-36.61 × (Z250/Z₅)) + (-9332 × (1/Z50)) + 37.91 for women. Additionally, we conducted measurements in 1624 men and 1368 women aged 18 to 40 years to establish sarcopenia cutoff values in the Japanese population. The mean values minus 2 standard

  10. 多频多段人体生物电阻抗测量系统%A Bioelectrical Impedance Measurement System Based on Multi-Frequency and Multi-Segment Technology

    Institute of Scientific and Technical Information of China (English)

    高秀娥; 唐佳; 陈波

    2012-01-01

    Bioelectrical impedance is an important composition of human body, and reflects the physical conditions of human tissues to some extent. Based on this, a multi-frequency and multi-segment bioelectrical impedance measurement system is designed on the principle of eight electrodes. In fact, the system, which consists of MCU system, sinusoidal excitation current source, RMS-to-DC circuit and etc, has achieved the impedance measurement of the extremities as well as the trunk under the frequency ranged from 5 ~ 500 kHz. Experiment results show that the system finally realizes high-accuracy measurements of amplitude and phase of bioelectrical impedance with the result of a relative error of magnitude which is less than 0. 7% and an absolute error of phase which is less than 0.8°.%人体生物电阻抗是人体体成分的重要组成部分,在一定程度上反映了人体组织的生理状况.基于此,设计了一套基于八电极的多频多段人体生物电阻抗测量系统.测量系统由单片机系统、正弦交流激励电流源、有效值检测电路等组成,实现了5 ~ 500 kHz频率范围的左右上下肢及躯干的5段测量.测试结果表明,测量系统实现了人体生物电阻抗的幅值和相位的高精度测量,幅值相对误差小于0.7%,相位绝对误差小于0.8°.

  11. Measurement of body composition changes during weight loss in obese men using multi-frequency bioelectrical impedance analysis and multi-compartment models.

    Science.gov (United States)

    Johnstone, Alexandra M; Faber, Peter; Gibney, Eileen R; Lobley, Gerald E; Stubbs, R James; Siervo, Mario

    2014-01-01

    The accurate measurement of changes in body composition is important to assess the contribution of fat and fat free mass to total body mass change as a measure of the effectiveness of weight loss programmes. Bioelectrical impedance spectroscopy (BIS) is a rapid and non-invasive technique which could be applied to assess body composition changes. The aim of the study was to evaluate the accuracy of the BIS for the measurement of fat mass (FM), total body water (TBW) and extracellular water (ECW) changes induced by different degrees of caloric deficit in obese men. Three groups of six, obese men participated in either (i) a total fast (for 6 days); (ii) a VLCD (2.5 MJ/day for 3 weeks); or (iii) LCD (5.2 MJ/day for 6 weeks). FM was measured using a 4-compartment (4-C) model. TBW and ECW were determined by dilution methods, respectively. TBW, ECW and FM were also assessed with BIS. Body weight loss in the fasting group was 6.0 ± 1.3 kg over 6 days; the VLCD group lost 9.2 ± 1.2 kg over 21 days and the LCD group lost 12.6 ± 2.4 kg over 42 days. BIS underestimated FM changes (bias = -3.3 ± 3.8 kg) and overestimated changes in TBW and ECW by +1.8 ± 4.8 kg and +2.3 ± 6.4 kg, respectively. The measurement error was consistently larger in the fasting group and the magnitude of the bias interacted significantly with the rate of weight loss. Rapid weight loss affects the accuracy of the BIS in detecting changes in body composition. A careful interpretation of the results is needed when sizable changes in body water compartments occurs. © 2014 Asian Oceanian Association for the Study of Obesity . Published by Elsevier Ltd. All rights reserved.

  12. Serial measurements of body composition in obese subjects during a very-low-energy diet (VLED) comparing bioelectrical impedance with hydrodensitometry.

    Science.gov (United States)

    Carella, M J; Rodgers, C D; Anderson, D; Gossain, V V

    1997-05-01

    Bioelectrical impedance analysis (BIA) is a convenient, inexpensive, and noninvasive technique for measuring body composition. BIA has been strongly correlated with total body water (TBW) and also has been validated against hydrodensitometry (HD). The accuracy and clinical utility of BIA and HD during periods of substantial weight loss remain controversial. We measured body composition in moderately and severely obese patients serially using both methods during a very-low-energy diet (VLED). Mean initial weight in these patients was 116 (+/-30) kg (range, 74-196 kg). Mean weight loss was 24 (+/-13) kg with a decrease in fat mass (FM) by HD of kg (p < 0.001) and a decrease in fat-free mass (FFM) of 3.6 kg (p < 0.05). Loss of FFM is best predicted by the rate (kg/wk) of weight loss (r2 = 0.86, p < 0.0001). FFM, as predicted from BIA equations, was highly correlated with FFM as estimated by HD during all testing sessions (r = 0.92-0.98). Although highly correlated, BIA overestimated FFM relative to HD and this difference appeared to be more pronounced for taller patients with greater truncal obesity. Although the discrepancy was no greater during weight-loss treatment, the level of disagreement was considerable. Therefore, the two methods cannot be used interchangeably to monitor relative changes in body composition in patients with obesity during treatment with VLED. The discrepancy between BIA and HD may be caused by body mass distribution considerations and by perturbations in TBW which affect the hydration quotient for FFM (BIA) and/or which affect the density constants for FFM and FM (HD).

  13. Comparison of bioelectrical impedance with skinfold thickness and X-ray absorptiometry to measure body composition in HIV-infected with lipodistrophy.

    Science.gov (United States)

    Siqueira Vassimon, H; Siqueira Vasimon, H; Jordao, A A; Albuquerque de Paula, F J; Artioli Machado, A; Pontes Monteiro, J

    2011-01-01

    Human immunodeficiency vírus (HIV)-associated lipodystrophy syndrome (LS) includes body composition and metabolic alterations. Lack of validated criteria and tools make difficult to evaluate body composition in this group. The aim of the study was to compare different methods to evaluate body composition between Brazilians HIV subjects with (HIV+LIPO+) or without LS (HIV+LIPO-) and healthy subjects (Control). in a cross-sectional analyses, body composition was measured by bioelectrical impedance analysis (BIA), skinfold thickness (SF) and dual-energy x-ray absorptiometry (DXA) in 10 subjects from HIV+LIPO+ group; 22 subjects from HIV+LIPO- group and 12 from Control group. There were no differences in age and body mass index (BMI) between groups. The fat mass (FM) (%) estimated by SF did not correlate with DXA in HIV+LIPO+ group (r = 0,46/ p > 0,05) and had fair agreement in both HIV groups (HIV+LIPO+ =0,35/ HIV+ LIPO- = 0,40). BIA had significant correlation in all groups (p < 0,05) and strong agreement, meanly in HIV groups, for FM (HIV+LIPO+ = 0,79/ HIV+LIPO- = 0,85 / Control = 0,60) and for fat free mass (FFM) (HIV+LIPO+ = 0,93 / HIV+LIPO- = 0,92 / Control = 0,73). Total fat mass can be measured by BIA with good precision, but not by SF in HIV-infected patients with LS. Segmental BIA, triciptal SF, circumferences of arms, waist and legs maybe alternatives that need more studies.

  14. Percentage of body fat assessment using bioelectrical impedance analysis and dual-energy X-ray absorptiometry in a weight loss program for obese or overweight Chinese adults.

    Directory of Open Access Journals (Sweden)

    Yi-Chun Li

    Full Text Available The current study aimed to compare the estimates of body fat percentage (%BF by performing bioelectrical impedance analysis (BIA and dual energy X-ray absorptiometry (DXA in a sample of obese or overweight Chinese adults who participated in a weight-loss randomized control trial stratified by gender to determine whether or not BIA is a valid measurement tool. Among 189 adults [73 males, 116 females; age = 41 to 74 years; mean body mass index (BMI = 27.3 kg/m(2], assessments of %BF at the baseline and six months from the baseline were conducted by performing BIA and DXA. Bland-Altman analyses and multiple regression analyses were used to assess the relationships between %BFBIA and %BFDXA. Compared with DXA, BIA underestimated %BF [in males: 4.6, -2.4 to 11.7 (mean biases, 95% limit of agreement at the baseline, 1.4, -7.4 to 10.2 at the endpoint, and 3.2, -4.8 to 11.3 in changes; in females: 5.1, -2.4 to 12.7; 2.2, -6.1 to 10.4; and 3.0, -4.8 to 10.7, respectively]. For males and females, %BFDXA proved to be a significant predictor of the difference between DXA and BIA at the baseline, the endpoint, and in changes when BMI and age were considered (in males: p<0.01 and R (2 = 23.1%, 24.1%, 20.7%, respectively; for females: p<0.001 and R (2 = 40.4%, 48.8%, 25.4%, respectively. The current study suggests that BIA provides a relatively accurate prediction of %BF in individuals with normal weight, overweight, or obesity after the end of weight-loss program, but less accurate prediction of %BF in obese individuals at baseline or weight change during the weight-loss intervention program.

  15. Evaluation of the BOD POD and leg-to-leg bioelectrical impedance analysis for estimating percent body fat in National Collegiate Athletic Association Division III collegiate wrestlers.

    Science.gov (United States)

    Dixon, Curt B; Deitrick, Ronald W; Pierce, Joseph R; Cutrufello, Paul T; Drapeau, Linda L

    2005-02-01

    The purpose of this study was to compare percent body fat (%BF) estimated by air displacement plethysmography (ADP) and leg-to-leg bioelectrical impedance analysis (LBIA) with hydrostatic weighing (HW) in a group (n = 25) of NCAA Division III collegiate wrestlers. Body composition was assessed during the preseason wrestling weight certification program (WCP) using the NCAA approved methods (HW, 3-site skinfold [SF], and ADP) and LBIA, which is currently an unaccepted method of assessment. A urine specific gravity less than 1.020, measured by refractometry, was required before all testing. Each subject had all of the assessments performed on the same day. LBIA measurements (Athletic mode) were determined using a Tanita body fat analyzer (model TBF-300A). Hydrostatic weighing, corrected for residual lung volume, was used as the criterion measurement. The %BF data (mean +/- SD) were LBIA (12.3 +/- 4.6), ADP (13.8 +/- 6.3), SF (14.2 +/- 5.3), and HW (14.5 +/- 6.0). %BF estimated by LBIA was significantly (p < 0.01) smaller than HW and SF. There were no significant differences in body density or %BF estimated by ADP, SF, and HW. All methods showed significant correlations (r = 0.80-0.96; p < 0.01) with HW. The standard errors of estimate (SEE) for %BF were 1.68, 1.87, and 3.60%; pure errors (PE) were 1.88, 1.94, and 4.16% (ADP, SF, and LBIA, respectively). Bland-Atman plots for %BF demonstrated no systematic bias for ADP, SF, and LBIA when compared with HW. These preliminary findings support the use of ADP and SF for estimating %BF during the NCAA WCP in Division III wrestlers. LBIA, which consistently underestimated %BF, is not supported by these data as a valid assessment method for this athletic group.

  16. Bioelectrical impedance phase angle in clinical practice: implications for prognosis in stage IIIB and IV non-small cell lung cancer

    Directory of Open Access Journals (Sweden)

    Grutsch James F

    2009-01-01

    Full Text Available Abstract Background A frequent manifestation of advanced lung cancer is malnutrition, timely identification and treatment of which can lead to improved patient outcomes. Bioelectrical impedance analysis (BIA is an easy-to-use and non-invasive technique to evaluate changes in body composition and nutritional status. We investigated the prognostic role of BIA-derived phase angle in advanced non-small cell lung cancer (NSCLC. Methods A case series of 165 stages IIIB and IV NSCLC patients treated at our center. The Kaplan Meier method was used to calculate survival. Cox proportional hazard models were constructed to evaluate the prognostic effect of phase angle, independent of stage at diagnosis and prior treatment history. Results 93 were males and 72 females. 61 had stage IIIB disease at diagnosis while 104 had stage IV. The median phase angle was 5.3 degrees (range = 2.9 – 8. Patients with phase angle 5.3 had 12.4 months (95% CI: 10.5 to 18.7; n = 84; (p = 0.02. After adjusting for age, stage at diagnosis and prior treatment history we found that every one degree increase in phase angle was associated with a relative risk of 0.79 (95% CI: 0.64 to 0.97, P = 0.02. Conclusion We found BIA-derived phase angle to be an independent prognostic indicator in patients with stage IIIB and IV NSCLC. Nutritional interventions targeted at improving phase angle could potentially lead to an improved survival in patients with advanced NSCLC.

  17. EFFECT OF INTERMITTENT SUB-MAXIMAL EXERCISE ON PERCENT BODY FAT USING LEG-TO-LEG BIOELECTRICAL IMPEDANCE ANALYSIS IN CHILDREN

    Directory of Open Access Journals (Sweden)

    Joseph L. Andreacci

    2006-09-01

    Full Text Available The purpose of this investigation was to determine the effect of intermittent sub-maximal exercise on percent body fat (%BF estimated by leg-to-leg bioelectrical impedance analysis (LBIA in children. Fifty-nine children (29 girls; 30 boys mean age 9.0 ± 1.3 years participated in this study. LBIA measured %BF values were obtained immediately before and within five minutes after completing an intermittent exercise protocol consisting of three 8-minute sub-maximal exercise bouts (2.74 km·hr-1, 0% grade; 4.03 km·hr-1, 0% grade; and 5.47 km·hr-1, 0% grade each separated by a 5-min seated rest period. The three exercise bouts corresponded to 56%, 61% and 71% of maximal heart rate. Significant differences (p < 0.001 were observed for fat mass, fat free mass, total body water, and body weight, post-exercise in both groups. Significant reductions (p < 0.001 in %BF were observed post-exercise in the female (23.1 ± 9.9 vs. 21.8 ± 9. 9 % and male (23.3 ± 10.5 vs. 21.8 ± 10.2 % children when compared to pre-exercise values. However, for the majority of the subjects (females = 86%; males = 73% the decrease in %BF post- exercise was less than 2.0 %BF. These data indicate that sub-maximal intermittent exercise, that may be representative of daily free-form activities in children, will most likely have a limited impact on %BF estimates when the assessment is performed immediately post-exercise

  18. A Comparison Study of Portable Foot-to-Foot Bioelectrical Impedance Scale to Measure Body Fat Percentage in Asian Adults and Children

    Directory of Open Access Journals (Sweden)

    Pei Ying Sim

    2014-01-01

    Full Text Available Objective. To compare the measurements of body fat percentage (BF% using the foot-to-foot bioelectrical impedance analysis (FTF-BIA with the direct segmental multifrequency BIA (DSM-BIA. Methods. There were 36 men and 52 women (37.1±14.3 years with 57% Malays, 30% Chinese, and 13% Indian. For children, there were 45 boys and 26 girls (11.5±2.5 years with 52% Malay, 15% Chinese, and 33% Indian. Results. Mean height for men was 168.4 cm, 11 cm taller than women. Men were 10 kg heavier than women at 70 kg. BF% in women was 32% and 33% whereas BF% in men was 23% and 25% when measured using FTF-BIA and DSM-BIA, respectively. In children, BF% measured with FTF-BIA and DSM-BIA was 49% and 46%, respectively. The correlations were significant for men (r=0.92, SEE = 2.80, women (r=0.91, SEE = 3.31, boys (r=0.95, SEE = 5.44, and girls (r=0.96, SEE = 5.27. The BF% in underweight/normal (r=0.92, SEE = 2.47 and that in overweight/obese adults (r=0.89, SEE = 3.61 were strongly correlated. The correlations were significant in normal/underweight (r=0.94, SEE = 3.78 and obese/overweight children (r=0.83, SEE = 6.49. All ethnic groups showed significant correlation with BF%. Malay adults (r=0.92, SEE = 3.27 and children (r=0.94, SEE = 0.88 showed significant mean differences in BF%. Conclusion. The FTF-BIA showed higher accuracy for all normal/underweight and Chinese group with acceptable overestimation in children and underestimation in adults. Caution should be taken when interpreting BF% depending on gender, BMI, and ethnicity.

  19. The comparative evaluation of patients′ body dry weight under hemodialysis using two methods: Bioelectrical impedance analysis and conventional method

    Directory of Open Access Journals (Sweden)

    Neda Alijanian

    2012-01-01

    Full Text Available Background: Dry weight (DW is an important concept related to patients undergoing hemodialysis. Conventional method seems to be time consuming and operator dependent. Bio impedance analysis (BIA is a new and simple method reported to be an accurate way for estimating DW. In this study, we aimed to compare the conventional estimation of DW with measuring DW by BIA. Materials and Methods: This study involved 130 uremic patients, performed in Isfahan, Iran. DW was calculated by both conventional (CDW and BIA (BIADW method and results were compared based on different grouping factors including sex, underlying cause of renal failure (RF (diabetic RF and non-diabetic RF, body mass index (BMI status, and sessions of hemodialysis. We also calculated the difference between DWs of 2 methods (DW diff = CDW-BIADW. Results: The mean of BIADW was significantly lower than CDW (57.20 ± 1.82 vs 59.36 ± 1.77, P value < 0.001. After grouping cases according to the underlying cause, BMI, sex, and dialysis sessions BIADW was significantly lower than CDW. Conclusion: Based on the combination of problems with CDW measurement which are corrected by BIA, and more clinical reliability of CDW, we concluded that although conventional method is a time-consuming and operator-dependent way to assess DW, DW could be estimated by combining both of these methods by finding the mathematic correlation between these methods.

  20. Evaluation of bioelectrical impedance analysis (BIA) to measure condition and energy allocated to reproduction in marine fishes

    Science.gov (United States)

    Fitzhugh, G. R.; Wuenschel, M. J.; McBride, R. S.

    2010-04-01

    Reliable estimates of fish energy density at specific times prior to spawning may provide suitable proxies for egg production, and thereby help to explain some of the observed annual variation in recruits per spawner. Our goal is to develop and test modifications of BIA technology to measure energy allocation to reproduction for a variety of marine fishes. To date, a newly developed measuring board and probe system stabilized readings, which was demonstrated by a significant reduction in the coefficients of variation for impedance measures. Total body water, wet and dry weights could be predicted with very good precision (r2 = 0.92-0.99) using BIA measures of reactance or resistance for a number of finfish species. While constituent relationships (e.g. body water- body mass functions) did not differ seasonally, we did find that BIA measures are sensitive to body composition changes related to the seasonal spawning cycle. In an examination of monthly samples of tilefish, phase angle decreased below 15° in post-spawning (regressed) females. Such a monthly trend, which suggests available energy had decreased following the spawning season, was not evident from other, more traditional measures of condition including body-muscle water content, Fulton's K or ordinal measures of fat deposition (such as mesenteric fat). These preliminary results show that BIA technology is a promising application for tracking and efficiently predicting energetic condition of marine fishes.

  1. 生物电阻抗铜片电极的化学刻蚀工艺%Chemical etching process of copper electrode for bioelectrical impedance technology

    Institute of Scientific and Technical Information of China (English)

    周伟; 宋嵘; 蒋乐伦; 许文平; 梁国开; 程德才; 刘灵蛟

    2012-01-01

    为获得具有强稳定性能的生物电阻抗电极,采用化学刻蚀加工方法,制造出表面具有一系列微结构的金属铜片电极.通过改变加工工艺参数的方法,着重分析刻蚀时间、刻蚀温度、刻蚀液体浓度、样品尺寸等刻蚀工艺参数对铜片电极的蚀刻速率和表面微结构的影响.结果表明:刻蚀速率将随着刻蚀时间的延长而逐渐降低,随着刻蚀温度的升高而逐渐升高,而刻蚀样本尺寸对刻蚀速率的影响不大.选用合适的刻蚀液体浓度(组分3),在室温条件下刻蚀20 min,可以获得具有丰富表面微结构的铜片电极.另外,进行24 h电极对接的连续性交流阻抗测试,与心电电极相比,利用化学刻蚀加工的铜片电极,由于表面具有丰富的表面微结构,可以形成可靠的表面接触,从而具有稳定的交流阻抗值.%In order to obtain bioelectrical impedance electrodes with high stability,the chemical etching process was used to fabricate the copper electrode with a series of surface microstructures.By changing the etching processing parameters,some comparison experiments were performed to reveal the influence of etching time,etching temperature,etching liquid concentration,and sample sizes on the etching rate and surface microstructures of copper electrode.The result shows that the etching rate is decreased with increasing etching time,and is increased with increasing etching temperature.Moreover,it is found that the sample size has little influence on the etching rate.After choosing the reasonable etching liquid composition (formulation 3),the copper electrode with many surface microstructures can be obtained by chemical etching process at room temperature for 20 min.In addition,using the alternating current impedance test of electrode-electrode for 24 h,the copper electrode with a series of surface microstructures fabricated by the etching process presents a more stable impedance value compared with the

  2. Assessment of body fat proportion by means of bioelectrical impedance in athletic boys aged 7 to 18 years with respect to specific types of instruments

    Directory of Open Access Journals (Sweden)

    Sigmund Martin

    2015-07-01

    Full Text Available BACKGROUND: Bioelectrical impedance (BIA seems an appropriate method for basic diagnostics of body composition in a practical environment. This is a non-time consuming non-invasive method that provides a high degree of response relevance. However, the values identifi ed by the BIA method are susceptible to a number of factors, which need to be taken into account during the investigation stage and interpretation of the results. One of the signifi cant factors infl uencing the outcomes of measurement is the instrument factor.OBJECTIVE: The objective of the present comparative survey was to analyse the proportions of body fat by means of the BIA hand-to-leg method and BIA leg-to-leg method in a sample of athletic individuals aged 7 to 18 years.METHODS: The survey included a total of 178 ice-hockey players aged 7 to 18 years. The proportion of body fat analysed by means of the BIA hand-to-leg method was measured by the Tanita BC-418 MA instrument. For the purposes of the BIA leg-to-leg method the Tanita BF-350 instrument was used (Tanita, Japan. Both instruments work at a frequency of 50 kHz.RESULTS: The percentage of body fat established by the BIA leg-to-leg method (M = 13.5%; SD = 4.8 indicated signifi cantly lower values of fat percentage than the values measured by the BIA hand-to-leg method (M = 17.1%; SD = 4.3. The overall diff erence represents an average value of 3.6% (standard mode; p < .001; d = 0.8. Regarding the monitored age categories the observed diff erences are in the range of 3.1–4.7% (p < .001; d = 0.7–1.2.CONCLUSION: The present study compares the proportions of body fat by means of the BIA leg-to-leg method and BIA hand-to-leg method in athletic boys aged 7 to 18 years. The results measured by the BIA leg-to-leg method signifi cantly undervalue the proportion of body fat in comparison with the BIA hand-to-leg method. The instrument factor and age factor represented signifi - cant variables infl uencing the results of the

  3. Effect of intermittent sub-maximal exercise on percent body fat using leg-to-leg bioelectrical impedance analysis in children.

    Science.gov (United States)

    L Andreacci, Joseph; B Dixon, Curt; Ledezma, Christina; L Goss, Fredric

    2006-01-01

    The purpose of this investigation was to determine the effect of intermittent sub-maximal exercise on percent body fat (%BF) estimated by leg-to-leg bioelectrical impedance analysis (LBIA) in children. Fifty-nine children (29 girls; 30 boys) mean age 9.0 ± 1.3 years participated in this study. LBIA measured %BF values were obtained immediately before and within five minutes after completing an intermittent exercise protocol consisting of three 8-minute sub-maximal exercise bouts (2.74 km·hr(-1), 0% grade; 4.03 km·hr(-1), 0% grade; and 5.47 km·hr(-1), 0% grade) each separated by a 5-min seated rest period. The three exercise bouts corresponded to 56%, 61% and 71% of maximal heart rate. Significant differences (p < 0.001) were observed for fat mass, fat free mass, total body water, and body weight, post-exercise in both groups. Significant reductions (p < 0.001) in %BF were observed post-exercise in the female (23.1 ± 9.9 vs. 21.8 ± 9. 9 %) and male (23.3 ± 10.5 vs. 21.8 ± 10.2 %) children when compared to pre-exercise values. However, for the majority of the subjects (females = 86%; males = 73%) the decrease in %BF post- exercise was less than 2.0 %BF. These data indicate that sub-maximal intermittent exercise, that may be representative of daily free-form activities in children, will most likely have a limited impact on %BF estimates when the assessment is performed immediately post-exercise. Key PointsLBIA measures of body weight, percent body fat, fat mass, fat free mass and total body water were significantly lower after the intermittent sub-maximal exercise.The reductions in percent body fat for girls (1.4%) and boys (1.5%) compare favorably to previous investigations.Intermittent exercise, that may be representative of daily free-form activities in children, will most likely have a limited impact on LBIA percent body fat estimates.

  4. Measuring line parameters of multiconductor cables using a vector impedance meter

    OpenAIRE

    Knockaert, Jos; Peuteman, Joan; Catrysse, Johan; Belmans, Ronnie

    2010-01-01

    In the present paper, a method to measure the parameters of a multiconductor transmission line is given. The method is accurate, straightforward and only needs a single vector impedance meter or equivalent. The method has been applied for frequencies in a range from 20 kHz up to 30 MHz.

  5. Time-invariant measurement of time-varying bioimpedance using vector impedance analysis.

    Science.gov (United States)

    Sanchez, B; Louarroudi, E; Pintelon, R

    2015-03-01

    When stepped-sine impedance spectroscopy measurements are carried out on (periodically) time-varying bio-systems, the inherent time-variant (time-periodic) parts are traditionally ignored or mitigated by filtering. The latter, however, lacks theoretical foundation and, in this paper, it is shown that it only works under certain specific conditions. Besides, we propose an alternative method, based on multisine signals, that exploits the non-stationary nature in time-varying bio-systems with a dominant periodic character, such as cardiovascular and respiratory systems, or measurements interfered with by their physiological activities. The novel method extracts the best—in a mean square sense—linear time-invariant (BLTI) impedance approximation ZBLTI(jω) of a periodically time-varying (PTV) impedance ZPTV(jω, t) as well as its time-periodic part. Relying on the geometrical interpretation of the BLTI concept, a new impedance analysis tool, called vector impedance analysis (VIA), is also presented. The theoretical and practical aspects are validated through measurements performed on a PTV dummy circuit and on an in vivo myocardial tissue.

  6. Study of cystatin C (Cys C in relation to the calculation of the glomerular filtration rate and bioelectrical impedance analysis parameters in obese patients with and without type 2 diabetes

    Directory of Open Access Journals (Sweden)

    Mario Liani

    2012-01-01

    Full Text Available IntroductionAssessment of renal function based on quantification of the glomerular filtration rate (GFR is essential for early detection of damage and progression of renal diseases. The purpose of our study was to determine the value of cystatin C (Cys C assays in the calculation of the GFR and bioelectrical impedance analysis parameters in obese subjects aged 30-70 years with moderately damaged renal function.Materials and methodsCys C levels were measured with a new immunoturbidimetric kit (Roche Diagnostics and an automated Cobas c6000 analyzer. In the GFR calculation, creatinine and Cys C levels were included. The GFR calculated with the equation that included Cys C in obese and normal-weight patients is not affected by changes in the lean body mass.ResultsObese patients (N = 70 had a mean (± SD serum creatinine level of 1.52 ± 1.0 mg/dL and a mean Cys C level of 1.28 ± 0.59 mg/L. In this group, the GFR calculated on the basis of MDRD, Cys C, and creatinine clearance values showed similar filtered values between MDRD and Cys C and a DS value smaller in the case of Cys C. The correlation (R2 between GFR and its metabolite is higher in the case of Cys C when somatotype parameters (measured with bioelectrical impedance analysis were introduced into the equation.ConclusionsWhen Cys C is included in calculations of GFR, the result shows a higher correlation degree compared to the MDRD system. Given that Cys C shows less intra-individual variability than creatinine, it can be applied in routine diagnostics in a larger number of patients.

  7. [Saarland Growth Study: analyses of body composition of children, aged 3 to 11 years. Measurement of height, weight, girth (abdomen, upper arm, calf) and skinfolds (triceps, biceps, subscapular,suprailiacal, abdominal) and bioelectric impedance (BIA)].

    Science.gov (United States)

    Weinand, C; Müller, S; Zabransky, S; Danker-Hopfe, H

    2000-01-01

    This study aimed to set up current reference charts of anthropometric data in the Saarland. Only national and international data were available to be compared but no former Saarland charts could be found. In the period between 1994 and 1995 we investigated children of 3 to 11 years in a cross-sectional study. Therefore we measured body height, weight, circumferences, skinfolds and bioelectrical impedance (BIA). No significant gender differences were found for body height and weight. Boys of all groups of age showed bigger abdominal circumferences than girls of the same age. On the other hand upper-arm and calf-girth of younger girls were larger than that from boys. In higher age groups circumferences become rather equal. The skinfolds of Saarland girls are thicker than those of boys. The urban rural comparison indicated no significant differences. Nor was any social divergence found among the aforementioned parameters. Regarding height Saarland children are seen to be similar or somewhat shorter than those examined in national or international studies. By the way, in higher percentiles the children in our study were heavier. Thus high BMI values of our study are bigger compared with former studies. According to the definition of obesity by the ECOG almost 20 to 30% of our children are obese. The older children become the higher is the percentage of obesity. Comparing girls and boys, bioelectrical impedance shows higher values for girls. In higher age classes resistance levels gets smaller, in boys more so than in girls. Body fat estimated by a formula based on BIA test parameters yielded negative values. So we propose the use of sex- and age-specific raw charts of BIA test parameters.

  8. Comparison of Wired and Wireless Bio-Electrical Impedance Fluid Status Monitoring Devices and Validation to Body Mass and Urine Specific Gravity Changes Following Mild Dehydration

    Science.gov (United States)

    2008-01-18

    status assessment method, ZOE2, is FDA approved for fluid status monitoring. The ZOE2 measures thoracic bio -electrical impedance. A new wireless version...impedance as a valid measure of hydration status in clinical or controlled settings. However, there is speculation as to the utility of bio -electrical...no significant differences were detected between pre- to post-practice for the ZOE2 or ZOEW device. Bio -electrical impedance, as measured by the ZOEW

  9. Electromagnetic scattering of a vector Bessel beam in the presence of an impedance cone

    KAUST Repository

    Salem, Mohamed

    2013-07-01

    The electromagnetic field scattering of a vector Bessel beam in the presence of an infinite circular cone with an impedance boundary on its surface is considered. The impinging field is normal to the tip of the cone and is expanded in terms of vector spherical wave functions; a Kontorovich-Lebedev (KL) transform is employed to expand the scattered fields. The problem is reduced to a singular integral equation with a variable coefficient of the non-convolution type. The singularities of the spectral function are deduced and representations for the field at the tip of the cone as well as other regions are given together with the conditions of validity of these representations. © 2013 IEEE.

  10. Assessing Body Fat of Children by Skinfold Thickness, Bioelectrical Impedance Analysis, and Dual-Energy X-Ray Absorptiometry: A Validation Study Among Malay Children Aged 7 to 11 Years.

    Science.gov (United States)

    Noradilah, Mohd Jonit; Ang, Yeow Nyin; Kamaruddin, Nor Azmi; Deurenberg, Paul; Ismail, Mohd Noor; Poh, Bee Koon

    2016-07-01

    This study aims to validate skinfold (SKF) and bioelectrical impedance analysis (BIA) against dual-energy X-ray absorptiometry (DXA) in determining body fat percentage (BF%) of Malay children aged 7 to 11 years. A total of 160 children had their BF% assessed using SKF and BIA, with DXA as the criterion method. Four SKF equations (SKFBray, SKFJohnston, SKFSlaughter, and SKFGoran) and 4 BIA equations (BIAManufacturer, BIAHoutkooper, BIARush, and BIAKushner) were used to estimate BF%. Mean age, weight, and height were 9.4 ± 1.1years, 30.5 ± 9.9 kg, and 131.3 ± 8.4 cm. All equations significantly underestimated BF% (P < .05). BIA equations had reasonable agreement with DXA and were independent of BF% with BIAManufacturer being the best equation. Although BIA underestimates BF% as compared with DXA, BIA was more suitable to measure BF% in a population that is similar to this study sample than SKF, suggesting a need to develop new SKF equations that are population specific. © 2016 APJPH.

  11. Change in fat-free mass assessed by bioelectrical impedance, total body potassium and dual energy X-ray absorptiometry during prolonged weight loss

    DEFF Research Database (Denmark)

    Hendel, H W; Gotfredsen, A; Højgaard, L

    1996-01-01

    A total of 16 obese women (body mass index (BMI) 30-43 kg m(-2)) participated in a weight reduction study. Before and after a weight loss of 11.7 +/- 7.4 kg (mean +/- SD), body composition was assessed by dual energy X-ray absorptiometry (DXA), and total body potassium counting (TBK). These measu......A total of 16 obese women (body mass index (BMI) 30-43 kg m(-2)) participated in a weight reduction study. Before and after a weight loss of 11.7 +/- 7.4 kg (mean +/- SD), body composition was assessed by dual energy X-ray absorptiometry (DXA), and total body potassium counting (TBK......). These measurements were compared with bioimpedance analysis (BIA) by applying 11 predictive BIA equations published in the literature. Predictive equations for the present study population were developed, with the use of fat-free mass (FFM) as assessed by TBK and DXA as references in multiple regression analysis....... The results of the BIA equations varied widely; FFM was generally overestimated by BIA as compared with DXA and TBK before and after weight loss. During weight loss, the FFM did not change, as estimated by DXA (1.3 +/- 2.3 kg, p > 0.05) and TBK (0.9 +/- 2.9 kg, p > 0.05). The recorded change in impedance (R...

  12. Are ethnic and gender specific equations needed to derive fat free mass from bioelectrical impedance in children of South asian, black african-Caribbean and white European origin? Results of the assessment of body composition in children study.

    Directory of Open Access Journals (Sweden)

    Claire M Nightingale

    Full Text Available BACKGROUND: Bioelectrical impedance analysis (BIA is a potentially valuable method for assessing lean mass and body fat levels in children from different ethnic groups. We examined the need for ethnic- and gender-specific equations for estimating fat free mass (FFM from BIA in children from different ethnic groups and examined their effects on the assessment of ethnic differences in body fat. METHODS: Cross-sectional study of children aged 8-10 years in London Primary schools including 325 South Asians, 250 black African-Caribbeans and 289 white Europeans with measurements of height, weight and arm-leg impedance (Z; Bodystat 1500. Total body water was estimated from deuterium dilution and converted to FFM. Multilevel models were used to derive three types of equation {A: FFM = linear combination(height+weight+Z; B: FFM = linear combination(height(2/Z; C: FFM = linear combination(height(2/Z+weight}. RESULTS: Ethnicity and gender were important predictors of FFM and improved model fit in all equations. The models of best fit were ethnicity and gender specific versions of equation A, followed by equation C; these provided accurate assessments of ethnic differences in FFM and FM. In contrast, the use of generic equations led to underestimation of both the negative South Asian-white European FFM difference and the positive black African-Caribbean-white European FFM difference (by 0.53 kg and by 0.73 kg respectively for equation A. The use of generic equations underestimated the positive South Asian-white European difference in fat mass (FM and overestimated the positive black African-Caribbean-white European difference in FM (by 4.7% and 10.1% respectively for equation A. Consistent results were observed when the equations were applied to a large external data set. CONCLUSIONS: Ethnic- and gender-specific equations for predicting FFM from BIA provide better estimates of ethnic differences in FFM and FM in children, while generic equations

  13. Utilização da impedância bioelétrica na indicação do excesso de gordura visceral e subcutânea The use of bioelectrical impedance to detect excess visceral and subcutaneous fat

    Directory of Open Access Journals (Sweden)

    Rômulo A. Fernandes

    2007-12-01

    Full Text Available OBJETIVO: Analisar a relação e o desempenho da impedância bioelétrica na indicação do excesso de gordura visceral e sobrepeso/obesidade em jovens brasileiros. MÉTODOS: A amostra foi composta por 811 jovens de ambos os sexos (de 11 a 17 anos. A identificação do estado nutricional foi baseada no valor da dobra cutânea tricipital e gordura relativa (impedância bioelétrica e no excesso de gordura visceral no valor da circunferência de cintura. A análise estatística utilizou valores médios, desvios padrão, correlação linear, teste t de Student e curva ROC. RESULTADOS: Em ambos os gêneros, impedância bioelétrica apresentou bom desempenho na identificação do simultâneo excesso de gordura visceral e sobrepeso/obesidade, sendo mais específica (masculino = 92,4%; feminino = 93,8% do que sensível (masculino = 86,1%; feminino = 71,8%. CONCLUSÃO: Em conclusão, os achados oferecem suporte para o uso da impedância bioelétrica na identificação do excesso de gordura visceral e subcutânea em adolescentes.OBJECTIVE: To analyze bioelectrical impedance performance in detecting the presence of excess visceral fat and overweight/obesity in young Brazilians and how its values are related with them. METHODS: Study sample consisted of 811 adolescents of both genders (11 to 17 years of age. Nutritional status was determined based on triceps skinfold thickness (TSF, relative body fat (bioelectrical impedance, and excess visceral fat as determined by waist circumference. Statistical analysis was performed using means, standard deviations, linear correlation, Student's t test, and ROC curve. RESULTS: Bioelectrical impedance achieved good performance in identifying excess visceral fat associated with overweight/obesity in both genders, and was found to be more specific (male 92.4% and female 93.8% than sensitive (male 86.1% and female 71.8%. CONCLUSION: Our findings support the use of bioelectrical impedance to identify the presence of excess

  14. Bioelectricity and epimorphic regeneration.

    Science.gov (United States)

    Stewart, Scott; Rojas-Muñoz, Agustin; Izpisúa Belmonte, Juan Carlos

    2007-11-01

    All cells have electric potentials across their membranes, but is there really compelling evidence to think that such potentials are used as instructional cues in developmental biology? Numerous reports indicate that, in fact, steady, weak bioelectric fields are observed throughout biology and function during diverse biological processes, including development. Bioelectric fields, generated upon amputation, are also likely to play a key role during vertebrate regeneration by providing the instructive cues needed to direct migrating cells to form a wound epithelium, a structure unique to regenerating animals. However, mechanistic insight is still sorely lacking in the field. What are the genes required for bioelectric-dependent cell migration during regeneration? The power of genetics combined with the use of zebrafish offers the best opportunity for unbiased identification of the molecular players in bioelectricity.

  15. Association of nutrition parameters including bioelectrical impedance and systemic inflammatory response with quality of life and prognosis in patients with advanced non-small-cell lung cancer: a prospective study.

    Science.gov (United States)

    Sánchez-Lara, Karla; Turcott, Jenny G; Juárez, Eva; Guevara, Patricia; Núñez-Valencia, Carolina; Oñate-Ocaña, Luis F; Flores, Diana; Arrieta, Oscar

    2012-01-01

    Early identification and treatment of nutritional deficiencies can lead to improved outcomes in the quality of life (QoL) and survival of patients with nonsmall cell lung cancer (NSCLC). Noninvasive techniques are needed to evaluate changes in body composition as part of determining nutritional status. The aim of the study was to evaluate the association of nutritional parameters in health-related quality of life (HRQL) and survival in patients with advanced NSCLC. Chemotherapy-naïve patients with advanced NSCLC with good performance status Eastern Cooperative Oncology Group (ECOG) 0-2 were included prospectively in the study. We evaluated inflammatory parameters such as C-reactive protein, platelet/lymphocyte index, neutrophil/lymphocyte index, serum interleukin (IL)-6, and tumor necrosis factor-α, and nutritional variables such as body mass index (BMI) and serum albumin levels. Bioelectrical impedance analysis including phase angle was obtained before cisplatin-based chemotherapy was started. HRQL was assessed by application of the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire (QLQ)-C30 and QLQ-LC13 instruments at baseline. Overall survival (OS) was calculated with the Kaplan-Meier method and analyzed with log-rank and Cox proportional hazard models. One hundred nineteen patients were included. Mean BMI was 24.8 ± 4.5 kg/m(2), average weight loss of patients was 8.4%, and median phase angle was 5.8°. Malnutrition measured by subjective global assessment (SGA), weight loss >10%, BMI >20 was associated with lower HRQL scales. Patients with ECOG 2, high content serum IL-6, lower phase angle, and malnutrition parameters showed lower OS; however, after multivariate analysis, only ECOG 2 [Hazard ratio (HR), 2.7; 95% confidence interval (95% CI), 1.5-4.7; P = 0.001], phase angle ≤5.8° (HR = 3.02; 95% CI: 1.2-7.11; P = 0.011), and SGA (HR = 2.7; 95% CI, 1.31-5.5; P = 0.005) were associated with poor survival. Patients

  16. Estimativa da gordura corporal através de equipamentos de bioimpedância, dobras cutâneas e pesagem hidrostática Comparison of body fat estimation by bioelectric impedance, skinfold thickness, and underwater weighing

    Directory of Open Access Journals (Sweden)

    Maurício Nunes Rodrigues

    2001-08-01

    Full Text Available A estimativa do percentual de gordura (%G pela bioimpedância (BIA tem como vantagem a simplicidade da medida. Contudo, a confiabilidade da BIA tem sofrido críticas. O objetivo deste estudo foi comparar a estimativa do %G através das técnicas de bioimpedância (RJL-101; Byodinamics A-310, Maltron BF-900 e BF-906, de dobras cutâneas (DC e da pesagem hidrostática (PH. Observaram-se 25 indivíduos, homogeneizados segundo raça (branca, gênero (masculino e idade (18 a 36 anos. Para a medida de BIA foi utilizada a padronização proposta por Lukaski et al. (1985, 1986. Para as DC foram utilizadas as equações de å 3 DC e å 7 DC (Jackson, Pollock, 1978. Os valores de %G e de volume residual para PH foram preditos, respectivamente, pelas equações de Siri (1961 e Goldman e Becklake (1959. A análise estatística compreendeu: a comparação entre os métodos através da ANOVA com medidas repetidas seguida de testes post-hoc de Tukey; b correlação de Pearson (r; e c cálculo do erro padrão de estimativa (SEE das técnicas em relação à PH. Os resultados indicaram que: a as medidas de BIA não diferiram significativamente, entre si, para o %G estimado; b As medidas dos aparelhos A-310 e BF-906 não coincidiram com a PH (p The main advantage of the bioelectric impedance method (BIA in the determination of body fat (%BF is the simplicity of the procedure. However, its accuracy and reliability have been criticized. The purpose of this study was to compare the %BF obtained by BIA (RJL-101; Biodynamics A-310, Maltron BF-900 e BF-906, by skinfold thickness (ST, and by underwater weighing (UW. Twenty-five subjects, divided in homogenous groups according to age (18 to 36 years, sex (men, and race (white participated in the study. BIA measures were taken using the Lukaski et al. standardization (1985,1986. ST was taken by using the equation of 3 and 7 skinfolds (Jackson, Pollock, 1978. The values of %BF and residual volume for the UW were estimated

  17. Estimativa da massa muscular esquelética em mulheres idosas: validade da impedância bioelétrica Validity of bioelectrical impedance analysis for the estimation of skeletal muscle mass in elderly women

    Directory of Open Access Journals (Sweden)

    Cassiano Ricardo Rech

    2010-04-01

    Full Text Available O presente estudo tem como objetivos: a verificar a concordância entre os métodos da impedância bioelétrica (BIA e da absortometria radiológica de dupla energia (DXA para a estimativa da massa muscular esquelética (MME; e b analisar o poder preditivo de variáveis antropométricas e da BIA para a predição da MME em idosas. Foram avaliadas 120 mulheres (60 a 81 anos, residentes na região Sul do Brasil. Mensuraram-se as variáveis antropométricas (massa corporal e estatura; a resistência e hidratação dos tecidos livres de gordura foram medidas pela técnica da BIA tetrapolar (Biodinamics - BF-310, e pela DXA de corpo inteiro (Lunar Prodigy DF + 14319 Radiation e software 7.52.002 DPX-L. A diferença entre os métodos foi verificada pelo teste t pareado, análise dos resíduos e o coeficiente de correlação. O valor preditivo das variáveis antropométricas e de BIA foi verificado pela regressão linear múltipla, adotando nível de significância de p 0,01. Observou-se que a BIA subestimou em média 0,8kg (IC95%: -3,7; 2,0kg a MME, quando comparada com a DXA. Foi observada alta correlação entre os métodos (r² = 0,75; p The objectives of the present study were: a to determine the agreement between bioelectrical impedance analysis (BIA and dual-energy X-ray absorptiometry (DXA for the estimation of skeletal muscle mass (SMM, and b to analyze the predictive power of anthropometric variables and BIA for the prediction of SMM in elderly women. A total of 120 women (60 to 81 years, living in the southern region of Brazil, were studied. Anthropometric variables (body weight and height were measured. Resistance and hydration of fat-free tissues were measured by tetrapolar BIA (Biodynamics, BF-310 and by whole-body DXA (Lunar Prodigy DF + 14319 Radiation and DPX-L software, version 7.52.002. Differences between methods were determined using the paired t-test, analysis of residuals and correlation coefficient. The predictive value of the

  18. Analogies between the measurement of acoustic impedance via the reaction on the source method and the automatic microwave vector network analyzer technique

    Science.gov (United States)

    McLean, James; Sutton, Robert; Post, John

    2003-10-01

    One useful method of acoustic impedance measurement involves the measurement of the electrical impedance ``looking into'' the electrical port of a reciprocal electroacoustic transducer. This reaction on the source method greatly facilitates the measurement of acoustic impedance by borrowing highly refined techniques to measure electrical impedance. It is also well suited for in situ acoustic impedance measurements. In order to accurately determine acoustic impedance from the measured electrical impedance, the characteristics of the transducer must be accurately known, i.e., the characteristics of the transducer must be ``removed'' completely from the data. The measurement of acoustic impedance via the measurement of the reaction on the source is analogous to modern microwave measurements made with an automatic vector network analyzer. The action of the analyzer is described as de-embedding the desired data (such as acoustic impedance) from the raw data. Such measurements are fundamentally substitution measurements in that the transducer's characteristics are determined by measuring a set of reference standards. The reaction on the source method is extended to take advantage of improvements in microwave measurement techniques which allow calibration via imperfect standard loads. This removes one of the principal weaknesses of the method in that the requirement of high-quality reference standards is relaxed.

  19. 应用生物电阻抗预测方程评价维持性血液透析患者干体质量%Assessment of dry weight among maintenance hemodialysis patients with the application of bioelectrical impedance prediction equation

    Institute of Scientific and Technical Information of China (English)

    杜静; 隋小妮; 赵战云; 邹作君

    2012-01-01

    Object To explore the accuracy of bioelectrical impedance prediction equation in the evaluation of dry weight among maintenance hemodialysis (MHD) patients. Methods Dry weight of 60 MHD patients was estimated using electrical impedance value of 50 KHz frequency measured by bioelectrical impedance analyzer, combined with slope method and new 3-compartment model. Dry weight of these participants was the post-dialysis weight, measured by inferior vena cava diameter (IVCD) method which was deemed as golden standard. Another 90 individuals with matched gender, age, height, body weight and BMI were selected to construct coefficient and compare the human body parameters with MHD patient. Results Pearson correlation coefficient between the evaluated dry weight by slope method and true dry weight was 0.991. Bland-Altman plot showed these two approaches bore poor consistency and the difference between them was far from zero. Pearson correlation coefficient between assessed dry weight by new 3-compartmental model and true dry weight was 0.993. Bland- Airman plot revealed good consistency between the two methods with stable and minor diffidence as their differences fluctuated near zero. Conclusion Different bioelectrical impedance measuring instrument gives rise to the impact on measured data. In this study, the new 3-compartment model predicts the dry weight of MHD patients more accurately.%目的 探讨运用生物电阻抗预测方程评价维持性血液透析(maintenance hemodialysis,MHD)患者干体质量的准确性. 方法 使用多频生物电阻抗分析仪测定60例MHD患者50千赫下电阻抗值,结合斜率法、新三室模型预测MHD患者干体质量.经下腔静脉直径(inferior vena cava diameter,IVCD)等综合评价,认为患者的干体质量即入选患者本次透析后体质量,可用于干体质量准确性评价.另选择性别、年龄、身高,体质量和体质量指数(BMI)相匹配个体87例,用于构建方程系数及与MHD患

  20. INFLUÊNCIA DE DIFERENTES TIPOS DE ELETRODOS SOBRE OS VALORES DA BIOIMPEDÂNCIA CORPORAL E NA ESTIMATIVA DE MASSA MAGRA (MM EM GATOS ADULTOS INFLUENCE OF DIFFERENT TYPES OF ELECTRODES ON THE BIOELECTRICAL IMPEDANCE VALUES AND IN THE ESTIMATION OF LEAN BODY MASS (LBM IN ADULT CATS

    Directory of Open Access Journals (Sweden)

    Thassila Caccia Feragi Cintra

    2010-04-01

    Full Text Available A bioimpedância (BIC é um método que aplica à tecnologia da impedância no estudo da composição corporal pela avaliação da diferença da condutividade elétrica dos tecidos. Os resultados da BIC são expressos pelas medidas primárias de resistência (R e reatância (Xc. Neste experimento, o método foi desenvolvido para verificar a viabilidade do uso de três diferentes tipos de eletrodos sobre a reprodutibilidade dos valores de R e Xc em gatos adultos. As médias de R e Xc com adesivos e agulhas de acupuntura não diferiram entre si (p?0,05, e os menores valores dos coeficientes de variação obtidos com estes eletrodos sinalizaram para uma melhor reprodutibilidade dos resultados quando comparados com os da agulha hipodérmica. Os diferentes tipos de eletrodos não interferiram nos valores da massa magra (MM estimada por equação específica, porém a agulha de acupuntura mostrou ser o eletrodo mais estável e de melhor aplicabilidade. A MM determinada com os diferentes tipos de eletrodos foi superior (p?0,05 à obtida com a absorciometria de raios-x de dupla energia (DEXA, provavelmente decorrente da equação utilizada na sua estimativa.

    PALAVRAS-CHAVES: Composição corporal, felinos, impedância, massa magra.
    The bioelectrical impedance is a method that applies impedance technology in the study of physical composition by evaluation of electrical conductivity difference on each organism tissue. The results of bioelectrical impedance (BIC are expressed by the resistance (R and reactance (Xc primary measures. This study was carried out to verify the viability of the use of three different electrodes on the repeatability of R and Xc values in adult cats. The averages of R and Xc estimated by adhesive and acupuncture needles did not differ from each other (p?0.05 and the smaller values of the variation coefficient acquired with these electrodes signaled for a better reproducibility of the results when compared with

  1. Vectores

    OpenAIRE

    2016-01-01

    Documento que contiene la explicación sobre las temáticas de Sistemas coordenados, Cantidades vectoriales y escalares, Algunas propiedades de los vectores, Componentes de un vector y vectores unitarios

  2. Advanced binary search pattern for impedance spectra classification for determining the state of charge of a lithium iron phosphate cell using a support vector machine

    Science.gov (United States)

    Jansen, Patrick; Vollnhals, Michael; Renner, Daniel; Vergossen, David; John, Werner; Götze, Jürgen

    2016-09-01

    Further improvements on the novel method for state of charge (SOC) determination of lithium iron phosphate (LFP) cells based on the impedance spectra classification are presented. A Support Vector Machine (SVM) is applied to impedance spectra of a LFP cell, with each impedance spectrum representing a distinct SOC for a predefined temperature. As a SVM is a binary classifier, only the distinction between two SOC can be computed in one iteration of the algorithm. Therefore a search pattern is necessary. A balanced tree search was implemented with good results. In order to further improvements of the SVM method, this paper discusses two new search pattern, namely a linear search and an imbalanced tree search, the later one based on an initial educated guess. All three search pattern were compared under various aspects like accuracy, efficiency, tolerance of disturbances and temperature dependancy. The imbalanced search tree shows to be the most efficient search pattern if the initial guess is within less than ±5 % SOC of the original SOC in both directions and exhibits the best tolerance for high disturbances. Linear search improves the rate of exact classifications for almost every temperature. It also improves the robustness against high disturbances and can even detect a certain number of false classifications which makes this search pattern unique. The downside is a much lower efficiency as all impedance spectra have to be evaluated while the tree search pattern only evaluate those on the tree path.

  3. Bioelectrical Perchlorate Remediation

    Science.gov (United States)

    Thrash, C.; Achenbach, L. A.; Coates, J. D.

    2007-12-01

    Several bioreactor designs are currently available for the ex-situ biological attenuation of perchlorate- contaminated waters and recently, some of these reactor designs were conditionally approved by the California Department of Health Services for application in the treatment of perchlorate contaminated drinking water. However, all of these systems are dependent on the continual addition of a chemical electron donor to sustain microbial activity and are always subject to biofouling and downstream water quality issues. In addition, residual labile electron donor in the reactor effluent can stimulate microbial growth in water distribution systems and contribute to the formation of potentially toxic trihalomethanes during disinfection by chlorination. As part of our ongoing studies into microbial perchlorate reduction we investigated the ability of dissimilatory perchlorate reducing bacteria (DPRB) to metabolize perchlorate using a negatively charged electrode (cathode) in the working chamber of a bioelectrical reactor (BER) as the primary electron donor. In this instance the DPRB use the electrons on the electrode surface either directly or indirectly in the form of electrolytically produced H2 as a source of reducing equivalents for nitrate and perchlorate reduction. As part of this investigation our fed-batch studies showed that DPRB could use electrons from a graphite cathode poised at -500mV (vs. Ag/AgCl) for the reduction of perchlorate and nitrate. We isolated a novel organism, Dechlorospirillum strain VDY, from the cathode surface after 70 days operation which readily reduced 100 mg.L-1 perchlorate in a mediatorless batch bioelectrical reactor (BER) in 6 days. Continuous up-flow BERs (UFBERs) seeded with active cultures of strain VDY continuously treated waters containing 100 mg.L-1 perchlorate with almost 100% efficiency throughout their operation achieving a non-optimized volumetric loading of 60 mg.L-1 reactor volume.day-1. The same UFBERs also treated

  4. Vectors

    DEFF Research Database (Denmark)

    Boeriis, Morten; van Leeuwen, Theo

    2017-01-01

    This article revisits the concept of vectors, which, in Kress and van Leeuwen’s Reading Images (2006), plays a crucial role in distinguishing between ‘narrative’, action-oriented processes and ‘conceptual’, state-oriented processes. The use of this concept in image analysis has usually focused...... on the most salient vectors, and this works well, but many images contain a plethora of vectors, which makes their structure quite different from the linguistic transitivity structures with which Kress and van Leeuwen have compared ‘narrative’ images. It can also be asked whether facial expression vectors...... should be taken into account in discussing ‘reactions’, which Kress and van Leeuwen link only to eyeline vectors. Finally, the question can be raised as to whether actions are always realized by vectors. Drawing on a re-reading of Rudolf Arnheim’s account of vectors, these issues are outlined...

  5. 多频生物电阻抗技术评价 COPD 患者营养状况及其与血气分析指标的相关性%Evaluation of Nutritional Status in COPD Patients by Multi - frequency Bioelectrical Impedance and Its Correlation With Blood Gas Indicators

    Institute of Scientific and Technical Information of China (English)

    黄陈; 朱文艺; 徐静; 李利; 樊荣; 李琦; 王建

    2015-01-01

    Objective To examine the body composition of COPD patients by multi - frequency bioelectrical impedance and investigate the relationship between body composition and blood gas indicators in order to provide clinical references for nutritional support for COPD patients. Methods We enrolled 62 patients who was hospitalized and diagnosed with COPD in the Department of Respiratory Medicine of Xinqiao Hospital from January to June in 2011. Multi - frequency bioelectrical impedance was used to detect the patients' physical composition. We collected data of serum total protein,albumin, prealbumin,hemoglobin,lymph cell count,blood gas( PaCO2 ,PaO2 and SpO2 ),HCO -3 ,Cl - ,K + ,Na + ,pH of the subjects at admission. Statistical analysis was conducted on the above indicators. Results The malnutrition rates assessed by ribosomal protein content,body fat content,BMI and MAC were 41. 9% ,17. 7% ,19. 4% and 16. 1% , respectively. According the BMI,the patients with inadequate,normal and excess nutrition were significantly different( P < 0. 05 )in ribosomal TBW,BFM,PBF,FFM,PBFF,protein content and PBP;the subjects with inadequate nutrition were higher(P <0. 05)than those with normal and high nutrition in PBP;the subjects with inadequate nutrition were lower( P < 0. 05)than those with normal and high nutrition in PBF and FFM. TBW,FFM,ribosomal protein,and SMM were negatively correlated with PaO2 ( r = - 0. 311, - 0. 306, - 0. 308, - 0. 306;P < 0. 05),and BMI was negatively correlated with SpO2 ( r =- 0. 304,P < 0. 05). Conclusion COPD patients have high malnutrition rate when assessed by ribosomal protein. FFM is more sensitive than BMI in nutritional evaluation of COPD patients. The increase of FFM in COPD patients may improve hypoxia tolerance.%目的:应用多频生物电阻抗技术分析 COPD 患者人体成分及其与血气分析指标的关系,为 COPD 患者的营养支持提供依据。方法选择2011年1—6月在新桥医院呼吸科住院并诊断为 COPD

  6. Grado de acuerdo entre los índices adiposo-musculares obtenidos a partir de medidas antropométricas del brazo, pliegues cutáneos e impedancia bioeléctrica Interchangeability of the fat-to-fat-free mass ratios obtained by arm anthropometric measures, skinfold thickness and bioelectrical impedance

    Directory of Open Access Journals (Sweden)

    V. Martín Moreno

    2003-04-01

    agreement among the fat-to-fat-free mass ratios obtained by arm anthropometric measures (fat-muscle index, FMI, Siri equation for the sum of four skinfold thickness (body fat-muscle index, BFMI Siri and triceps skinfold (BFMItriceps and bioelectrical impedance (BFMI Omron methods. Methods: This is a cross-sectional study. A total of 145 patients were evaluated by anthropometry and bioelectrical impedance (Omron BF 300(, being estimated the agreement through the Intraclass Correlation Coefficient (ICC and Bland-Altman method. The reference method was BFMI Siri. Results: The ICC between BFMI Siri - BFMItriceps were 0,9304 (0,9035; 0,9498, between BFMI Siri - FMI of 0,7726 (0,6846; 0,8361 and between BFMI Siri - BFMI Omron of 0,9114 (0,8771; 0,9361. BFMItriceps (limits of agreement -0,171 to 0,117 show the best agreement according to Bland-Altman analysis with BFMI Siri, followed by BMFI Siri - BFMI Omron (-0,186; 0,178. The agreement limits between FMI and BFMI Siri (-0,2; 0,42, BFMItriceps (-0,26; 0,42 or BFMI Omron (-0,292; 0,504 were beyond of the established cut-off points (-0,2; 0,2. Conclusions: Due to the nature of the statistical agreement BFMItriceps and BFMI Omron are methods interchangeable methods between them and with BFMI Siri. FMI is not interchangeable with BFMI Siri, BFMI Omron or BFMItriceps. These results suggest that FMI cannot estimate properly the body composition. BFMItriceps and BFMI Omron are valid alternative methods to be used instead BFMI Siri in the fat-to-fat-free mass ratio assessment.

  7. Bioelectric modulation of macrophage polarization

    Science.gov (United States)

    Li, Chunmei; Levin, Michael; Kaplan, David L.

    2016-02-01

    Macrophages play a critical role in regulating wound healing and tissue regeneration by changing their polarization state in response to local microenvironmental stimuli. The native roles of polarized macrophages encompass biomaterials and tissue remodeling needs, yet harnessing or directing the polarization response has been largely absent as a potential strategy to exploit in regenerative medicine to date. Recent data have revealed that specific alteration of cells’ resting potential (Vmem) is a powerful tool to direct proliferation and differentiation in a number of complex tissues, such as limb regeneration, craniofacial patterning and tumorigenesis. In this study, we explored the bioelectric modulation of macrophage polarization by targeting ATP sensitive potassium channels (KATP). Glibenclamide (KATP blocker) and pinacidil (KATP opener) treatment not only affect macrophage polarization, but also influence the phenotype of prepolarized macrophages. Furthermore, modulation of cell membrane electrical properties can fine-tune macrophage plasticity. Glibenclamide decreased the secretion and gene expression of selected M1 markers, while pinacidil augmented M1 markers. More interestingly, glibencalmide promoted macrophage alternative activation by enhancing certain M2 markers during M2 polarization. These findings suggest that control of bioelectric properties of macrophages could offer a promising approach to regulate macrophage phenotype as a useful tool in regenerative medicine.

  8. Comparison of bioelectrical impedance with skinfold thickness and X-ray absorptiometry to measure body composition in HIV-infected with lipodistrophy Comparación de impendancia bioeléctrica con grosor de pliegues cutáneos y absorciometría de rayos X para mensurar la composición corporal de personas con VIH con lipodistrofia

    Directory of Open Access Journals (Sweden)

    H. Siqueira Vassimon

    2011-06-01

    Full Text Available Introduction: Human immunodeficiency vírus (HIV-associated lipodystrophy syndrome (LS includes body composition and metabolic alterations. Lack of validated criteria and tools make difficult to evaluate body composition in this group. Objective: The aim of the study was to compare different methods to evaluate body composition between Brazilians HIV subjects with (HIV+LIPO+ or without LS (HIV+LIPO- and healthy subjects (Control. Methods: in a cross-sectional analyses, body composition was measured by bioelectrical impedance analysis (BIA, skinfold thickness (SF and dual-energy x-ray absorptiometry (DXA in 10 subjects from HIV+LIPO+ group; 22 subjects from HIV+LIPO- group and 12 from Control group. Results: There were no differences in age and body mass index (BMI between groups. The fat mass (FM (% estimated by SF did not correlate with DXA in HIV+LIPO+ group (r = 0,46/ p > 0,05 and had fair agreement in both HIV groups (HIV+LIPO+ =0,35/ HIV+ LIPO- = 0,40. BIA had significant correlation in all groups (p Introducción: El síndrome de lipodistrofia (SL asociado al virus de inmunodeficiencia humana (HIV incluye alteraciones en la composición corporal y metabólica. La falta de herramientas adecuadas y criterios válidos dificultan la evaluación de la composición corporal en este grupo. Objetivo: El objetivo del estudio fue comparar distintos métodos para evaluar la composición corporal entre individuos brasileños con HIV que teniam (HIV+LIPO+ o no LS (HIV+LIPO- e individuos sanos (control. Métodos: Estudio transversal en el que fue evaluada la composición corporal por análisis de impedancia bioeléctrica (BIA, pliegues cutáneos (SF y absorciometría de rayos X de doble energía (DXA en un grupo de 10 individuos con HIV+LIPO+, 22 individuos del grupo HIV+ LIPO- y 12 individuos del grupo control. Resultados: No hubo diferencias en la edad e índice de masa corporal (IMC entre grupos. La masa grasa (MG (% estimada por SF no se correlacion

  9. A comparison of fat mass and skeletal muscle mass estimation in male ultra-endurance athletes using bioelectrical impedance analysis and different anthropometric methods Comparación de la masa grasa y muscular estimada en atletas varones de ultra-resistencia utilizando la bioimpedancia eléctrica y diferentes métodos antropométricos

    Directory of Open Access Journals (Sweden)

    B. Knechtle

    2011-12-01

    Full Text Available Two hundred and fifty seven male Caucasian ultraendurance athletes were recruited, pre-race, before different swimming, cycling, running and triathlon races. Fat mass and skeletal muscle mass were estimated using bioelectrical impedance analysis (BIA and anthropometric methods in order to investigate whether the use of BIA or anthropometry would be useful under field conditions. Total body fat estimated using BIA was significantly high (P Se reclutaron a 257 hombres caucasianos que eran atletas de alto rendimiento, antes de competir en diferentes pruebas triatlón de natación, ciclismo y carrera. Se estimaron la masa grasa y la masa de músculo esquelético utilizando un análisis de impedancia bioeléctrica (BIA y métodos antropométricos con el fin de investigar si el uso de BIA o de la antropometría sería útil en tales condiciones de campo. La grasa corporal total estimada por BIA fue significativamente mayor en comparación con la antropometría (P < 0,001. Cuando se compararon los resultados entre BIA y antropometría, se encontraron niveles de concordancia bajos a moderados. Estos resultados concuerdan con las diferencias halladas con el análisis Bland-Altman, lo que indica que la ecuación antropométrica de Ball et al. posee el mayor grado de concordancia (desviación = -3,0 ± 5,8 kg con BIA, con Stewart et al. (desviación = -6,4 ± 6,3 kg, Faulkner (desviación = -4,7 ± 5,8 kg y Wilmore-Siri (desviación = -4,8 ± 6,2 kg. La estimación de la masa de músculo esquelético fue significativamente superior con BIAS que con antropometría (P < 0,001. Los resultados de la ICC y del método Bland-Altman muestran que la ecuación antropométrica de Lee et al. (desviación = -5,4 ± 5,3 kg produjo el mayor grado de concordancia. El método combinado de Janssen et al. entre antropometría y BIA mostró el menor grado de concordancia (desviación = -12,5 ± 5,7 kg. Hubo una diferencia estadísticamente significativa entre los resultados

  10. A parametric framework for modelling of bioelectrical signals

    CERN Document Server

    Mughal, Yar Muhammad

    2016-01-01

    This book examines non-invasive, electrical-based methods for disease diagnosis and assessment of heart function. In particular, a formalized signal model is proposed since this offers several advantages over methods that rely on measured data alone. By using a formalized representation, the parameters of the signal model can be easily manipulated and/or modified, thus providing mechanisms that allow researchers to reproduce and control such signals. In addition, having such a formalized signal model makes it possible to develop computer tools that can be used for manipulating and understanding how signal changes result from various heart conditions, as well as for generating input signals for experimenting with and evaluating the performance of e.g. signal extraction methods. The work focuses on bioelectrical information, particularly electrical bio-impedance (EBI). Once the EBI has been measured, the corresponding signals have to be modelled for analysis. This requires a structured approach in order to move...

  11. Bioelectrical Impedance法による体組成の推定 : インピーダンス−体水分量(BI-TBW)法と皮下脂肪厚法から推定された日本人女性の%Fatの比較

    OpenAIRE

    小宮, 秀一; 今井, 克巳; 増田, 卓二; 赤崎, 房生

    1990-01-01

    This article reports a study in which the percent of fat estimated from bioelectrical impedance-total body water measurement and skinfold-body density method in Japanese women were compared. The bioelectrical impedance measurement provides a new approach to assessment of human body composition that is based on the principle that the electrical conductivity of lean body mass, which includes the protein matrix of adipose tissue, contains virtually all the water and conducting electrolytes in th...

  12. Establishment of muscle mass diagnostic standard of sarcopenia using a bioelectrical impedance analysis and epidemiological investigation of the elderly in Shanghai%上海地区老年人肌少症骨骼肌质量诊断标准建立和流行病学调查

    Institute of Scientific and Technical Information of China (English)

    陈敏; 白慧婧; 王纯; 王彦; 徐丹凤; 谢华; 易青; 李臻; 李茹

    2015-01-01

    目的 应用生物电阻抗法(BIA)建立上海地区老年人肌少症骨骼肌质量诊断标准并开展上海地区老年人肌少症患病率的调查.方法 对40例志愿者(年龄20~77岁)进行BIA和双能X线吸收仪(DEXA)检测,验证BIA测定瘦体组织的可靠性.对219例(年龄20~40岁)健康青年人(男∶女为100∶119)进行BIA检测,获得峰值肌量和老年人肌少症诊断切点.对657例≥60岁医院体检和社区老年人(男∶女为318∶339)进行BIA检测,了解上海地区老年人肌少症患病率.结果 BIA和DEXA检测瘦体组织差异无统计学意义(P=0.307).健康青年人四肢肌肉组织和身高平方的比值(ASM/身高2)男性和女性分别为(7.90±0.62)kg/m2和(6.12±0.44)kg/m2,老年人肌少症诊断标准男性和女性分别为≤6.66 kg/m2和≤5.24 kg/m2.将老年人分为3个年龄段,60~岁、70~岁和≥80岁3个年龄段男性肌少症的患病率分别为14.6%、25.0%和36.0%,女性分别为6.8%、12.6%和27.9%.老年男性整体患病率为23.6%,女性为11.8%.结论 BIA检测人体肌肉组织是可靠的,且随增龄肌少症患病率明显上升,男性高于女性.%Objective To establish diagnostic standard of sarcopenia using bioelectrical impedance analysis (BIA) and to obtain the prevalence of sarcopenia in the elderly in Shanghai.Methods 40 volunteers aged 20-77 years were enrolled and received BIA and dual-energy X-ray absorptiometry (DEXA) measurements in order to verify the reliability of BIA for measuring lean mass.219 healthy young volunteers aged 20 to 40 years with ratio of gender men:women 100:119 had BIA measurements to obtain peak muscle mass and sarcopenia diagnostic cut-off point of the elderly.657 elderly aged ≥ 60 years with ratio of gendermen:women 318:339 took BIA measurements to obtain the prevalence of sarcopenia in the elderly in Shanghai.Results No statistical difference between BIA-measured and DEXA-measured LM was observed (P =0.307).The

  13. The inverse problem of bioelectricity: an evaluation

    NARCIS (Netherlands)

    Oosterom, A. van

    2012-01-01

    This invited paper presents a personal view on the current status of the solution to the inverse problem of bioelectricity. Its focus lies on applications in the field of electrocardiography. The topic discussed is also relevant in other medical domains, such as electroencephalography, electroneurog

  14. Impedance analysis of acupuncture points and pathways

    Science.gov (United States)

    Teplan, Michal; Kukučka, Marek; Ondrejkovičová, Alena

    2011-12-01

    Investigation of impedance characteristics of acupuncture points from acoustic to radio frequency range is addressed. Discernment and localization of acupuncture points in initial single subject study was unsuccessfully attempted by impedance map technique. Vector impedance analyses determined possible resonant zones in MHz region.

  15. Impedance Scaling and Impedance Control

    Energy Technology Data Exchange (ETDEWEB)

    Chou, W.; Griffin, J.

    1997-06-01

    When a machine becomes really large, such as the Very Large Hadron Collider (VLHC), of which the circumference could reach the order of megameters, beam instability could be an essential bottleneck. This paper studies the scaling of the instability threshold vs. machine size when the coupling impedance scales in a ``normal`` way. It is shown that the beam would be intrinsically unstable for the VLHC. As a possible solution to this problem, it is proposed to introduce local impedance inserts for controlling the machine impedance. In the longitudinal plane, this could be done by using a heavily detuned rf cavity (e.g., a biconical structure), which could provide large imaginary impedance with the right sign (i.e., inductive or capacitive) while keeping the real part small. In the transverse direction, a carefully designed variation of the cross section of a beam pipe could generate negative impedance that would partially compensate the transverse impedance in one plane.

  16. Microwave Impedance Measurement for Nanoelectronics

    Directory of Open Access Journals (Sweden)

    M. Randus

    2011-04-01

    Full Text Available The rapid progress in nanoelectronics showed an urgent need for microwave measurement of impedances extremely different from the 50Ω reference impedance of measurement instruments. In commonly used methods input impedance or admittance of a device under test (DUT is derived from measured value of its reflection coefficient causing serious accuracy problems for very high and very low impedances due to insufficient sensitivity of the reflection coefficient to impedance of the DUT. This paper brings theoretical description and experimental verification of a method developed especially for measurement of extreme impedances. The method can significantly improve measurement sensitivity and reduce errors caused by the VNA. It is based on subtraction (or addition of a reference reflection coefficient and the reflection coefficient of the DUT by a passive network, amplifying the resulting signal by an amplifier and measuring the amplified signal as a transmission coefficient by a common vector network analyzer (VNA. A suitable calibration technique is also presented.

  17. Bioelectric Applications for Treatment of Melanoma

    Directory of Open Access Journals (Sweden)

    Richard Heller

    2010-09-01

    Full Text Available Two new cancer therapies apply bioelectric principles. These methods target tumor structures locally and function by applying millisecond electric fields to deliver plasmid DNA encoding cytokines using electrogene transfer (EGT or by applying rapid rise-time nanosecond pulsed electric fields (nsPEFs. EGT has been used to locally deliver cytokines such as IL-12 to activate an immune response, resulting in bystander effects. NsPEFs locally induce apoptosis-like effects and affect vascular networks, both promoting tumor demise and restoration of normal vascular homeostasis. EGT with IL-12 is in melanoma clinical trials and nsPEFs are used in models with B16F10 melanoma in vitro and in mice. Applications of bioelectrics, using conventional electroporation and extensions of it, provide effective alternative therapies for melanoma.

  18. Bioelectric Applications for Treatment of Melanoma

    Energy Technology Data Exchange (ETDEWEB)

    Beebe, Stephen J., E-mail: sbeebe@odu.edu; Schoenbach, Karl H.; Heller, Richard [Frank Reidy Research Center for Bioelectrics/Old Dominion University 4211 Monarch Way, Suite 300, Norfolk, Virginia 23508 (United States)

    2010-09-27

    Two new cancer therapies apply bioelectric principles. These methods target tumor structures locally and function by applying millisecond electric fields to deliver plasmid DNA encoding cytokines using electrogene transfer (EGT) or by applying rapid rise-time nanosecond pulsed electric fields (nsPEFs). EGT has been used to locally deliver cytokines such as IL-12 to activate an immune response, resulting in bystander effects. NsPEFs locally induce apoptosis-like effects and affect vascular networks, both promoting tumor demise and restoration of normal vascular homeostasis. EGT with IL-12 is in melanoma clinical trials and nsPEFs are used in models with B16F10 melanoma in vitro and in mice. Applications of bioelectrics, using conventional electroporation and extensions of it, provide effective alternative therapies for melanoma.

  19. Journal bearing impedance descriptions for rotordynamic applications

    Science.gov (United States)

    Childs, D.; Moes, H.; Van Leeuwen, H.

    1976-01-01

    The paper deals with the development of analytic descriptions for plain circumferentially-symmetric fluid journal bearings, which are suitable for use in rotor dynamic analysis. The bearing impedance vector is introduced, which defines the bearing reaction force components as a function of the bearing motion. Impedances are derived directly for the Ocvirk (short) and Sommerfeld (long) bearings, and the relationships between the impedance vector and the more familiar mobility vector are developed and used to derive analytic impedance for finite-length bearings. The static correctness of the finite-length cavitating impedance is verified. Analytic stiffness and damping coefficient definitions are derived in terms of an impedance vector for small motion around an equilibrium position and demonstrated for the finite-length cavitating impedance. Nonlinear transient rotordynamic simulations are presented for the short pi and 2-pi impedances and the finite-length cavitating impedance. It is shown that finite-length impedance yields more accurate results for substantially less computer time than the short-bearing numerical-pressure-integration approach.

  20. Primary report of noninvasive impedance monitoring of cerebral hematoma and edema in patients with intracerebral hemorrhage

    Institute of Scientific and Technical Information of China (English)

    Xia Yi Lu; Dong Wei-Wei; Yang Hao; Long Men; Yang Hua

    2000-01-01

    Background and Objective Brain edema is one of the most important clinical process in many diseases. Tissue impedance monitoring offers a non-invasive, bedside, rapid, and reliable technique for the monitoring of the brain edema. Methods We use a bioelectrical impedance(BEI) monitoring unit to record the brain impedance in the healthy volunteer and the patients with intracerebral hemorrhage. Percent of BEI variations were calculation. Results and Conclusions Brain BEI haven f any difference between both hemispheres in normal ones. In 48hrs, BEI value at hematoma-side was obviously decreased; after 48hrs, BEI value was obviously increased and continue to tenth day. Brain bioelectrical impedance monitoring, particularly noninvasively, is a first time in this field. The primary results show brain BEI could reflect the evolution of cerebral hematoma and edema.

  1. ANALYSIS OF INTERNALLY GENERATED NOISE OF BIOELECTRIC AMPLIFIERS

    Institute of Scientific and Technical Information of China (English)

    Mashhour Mustafa; Bani Amer

    2003-01-01

    This paper deals with internally generated noise of bioelectric amplifiers that are usually used for processing of bioelectric events. The main purpose of this paper is to present a procedure for analysis of the effects of internal noise generated by the active circuits and to evaluate the output noise of the author's new designed bioelectric amplifier that caused by internal effects to the amplifier circuit itself in order to compare it with the noise generated by conventional amplifiers. The obtained analysis results of internally generated noise showed that the total output noise of bioelectric active circuits does not increase when some of their resistors have a larger value. This behavior is caused by the different transfer functions for the signal and the respective noise sources associated with these resistors. Moreover, the new designed bioelectric amplifier has an output noise less than that for conventional amplifiers. The obtained analysis results were also experimentally verified and the final conclusions were drawn.

  2. Biohydrogen, bioelectricity and bioalcohols from cellulosic materials

    Energy Technology Data Exchange (ETDEWEB)

    Nissila, M.

    2013-03-01

    The demand for renewable energy is increasing due to increasing energy demand and global warming associated with increasing use of fossil fuels. Renewable energy can be derived from biological production of energy carriers from cellulosic biomass. These biochemical processes include biomass fermentation to hydrogen, methane and alcohols, and bioelectricity production in microbial fuel cells (MFCs). The objective of this study was to investigate the production of different energy carriers (hydrogen, methane, ethanol, butanol, bioelectricity) through biochemical processes. Hydrogen production potential of a hot spring enrichment culture from different sugars was determined, and hydrogen was produced continuously from xylose. Cellulolytic and hydrogenic cultures were enriched on cellulose, cellulosic pulp materials, and on silage at different process conditions. The enrichment cultures were further characterized. The effect of acid pretreatment on hydrogen production from pulp materials was studied and compared to direct pulp fermentation to hydrogen. Electricity and alcohol(s) were simultaneously produced from xylose in MFCs and the exoelectrogenic and alcohologenic enrichment cultures were characterized. In the end, the energy yields obtained from different biochemical processes were determined and compared. In this study, cultures carrying out simultaneous cellulose hydrolysis and hydrogen fermentation were enriched from different sources at different operational conditions. These cultures were successfully utilized for cellulose to hydrogen fermentation in batch systems. Based on these results further research should be conducted on continuous hydrogen production from cellulosic materials.

  3. [Study of bioelectrical properties of acupuncture areas].

    Science.gov (United States)

    Filimon, D V; Zaharia, D; Ciochină, A D; Stratulat, S; Stratone, Ana

    2010-01-01

    The research has as a goal the investigation of the bioelectrical behaviour of the acupunctural areas in order to obtain a scientific substantiation of the correspondence between the extreme--eastern medical tradition and the academical medicine. It is obvious that the Chinese traditional medicine knows a certain mechanism of ensurance of homeostasis of the organisms, a mechanism represented, according to the Chinese medical tradition, by the net of acupuncture points and meridians. The experimental data presented in this paper lead to the discovery of the fact that this net works as the fourth system of integration, the electrical--regulator one. The maintenance of the internal homeostasis of the superior organisms and their adaptation to the environment is ensured by the neuro-endocrine and circulatory systems through a mechanism described by Selye under the name of the Uncertain General Syndrome of Adaptation represented by the hypothalamo-hypophyso-corticoadrenal axis. The evolution of these systems and of their mechanisms can be supervised on the basis of the cortisole concentration. The research emphasized the direct proportionality between the cortisone levels and the variation of the electrical values of the acupuncture points, a fact that demonstrates the involvement of the net of acupuncture points and meridians in the maintenance processes of the homeostasis, control, adjustment and adaptation of the living organisms. Additionally, the analysis of the bioelectrical behavior of the acupuncture areas led to the conclusion that the morpho-functional substrate of this net is the conjunctive tissue. The physical-chemical properties of the interstitial connective tissue assures its working as an electro-regulator system on one side and as a harmonization agent of the neuro-endocrine and circulatory systems on the other side, this aspect being to be developed in a future paper.

  4. Synthetic electrophysiology: optically controlled oscillators in an engineered bioelectric tissue

    Science.gov (United States)

    McNamara, Harold; Zhang, Hongkang; Werley, Christopher; Cohen, Adam

    Multicellular electrical dynamics underlie crucial physiological functions, but the complexity of natural bioelectricity can obscure the relation of individual components (proteins, cells) to emergent system-level dynamics. Here we introduce optopatch-spiking HEK(OS-HEK) tissue, a minimal synthetic bioelectric tissue with 4 transgenic components that supports optical initiation of propagating electrical waves as well direct optical voltage readout. In conjunction with a home-built inverted microscope capable of patterned illumination, we use this tissue to probe the biophysical attributes of this excitable bioelectric medium, including dispersion relations, curvature-dependent wavefront propagation, electrotonic coupling, and effects of boundaries. We then used chemical patterning to define cellular circuits that support controllable oscillations and which retain memory for more than 2 hours (corresponding to 104 oscillations), constituting a substrate for binary bioelectric data storage. Finally, we use optical patterning of boundary conditions in a physically homogeneous tissue to design dynamically reconfigurable oscillators.

  5. bioelectricity production from cassava mill effluents using microbial ...

    African Journals Online (AJOL)

    user

    2016-04-02

    Apr 2, 2016 ... cassava mill effluent using the MFC technology. Keywords: Bioelectricity ... acceptors for its unlimited availability and its high redox potential [18]. ..... compounds in cells including nucleic acid and other material susceptible to ...

  6. VALIDITY OF BODY DENSITY WITH METHODS OF BODY MASS INDEX, SKIN FOLD, BIO- ELECTRICAL IMPEDANCE & CRITERION METHOD OF HYDROSTATIC IN MEN ATHLETES OF SWIMMING

    Directory of Open Access Journals (Sweden)

    M Bayat KASHKOLİ

    2011-12-01

    Full Text Available The goal of present research is estimating and validity of body density with methods of Body Mass Index, Skin Fold, Bio-Electrical Impedance and Criterion Method of Hydrostatic in men athletes of swimming. The present research has been conducted with semi-experimental and functional method. For doing so 25 men swimming athletes were randomly selected (N= 120. Statistical analysis was conducted with Pearson coefficient, correlated T-test, TE & SEE. The results of statistical analysis show that the method of Skin Fold Stat with hydrostatic criterion method has meaningful difference in society of swimmers. Also there is meaningful difference between body mass index and criterion method. There was not any meaningful difference between bio-electrical impedance and criterion method in swimmers. (TE=3.01, SEE=2.91, R=0.924, P=0.064. The findings show that that bio-electrical impedance in swimmer athletes is more suitable method.

  7. Electrical impedance spectroscopy and diagnosis of tendinitis.

    Science.gov (United States)

    Yoon, Kisung; Lee, Kyeong Woo; Kim, Sang Beom; Han, Tai Ryoon; Jung, Dong Keun; Roh, Mee Sook; Lee, Jong Hwa

    2010-02-01

    There have been a number of studies that investigate the usefulness of bioelectric signals in diagnoses and treatment in the medical field. Tendinitis is a musculoskeletal disorder with a very high rate of occurrence. This study attempts to examine whether electrical impedance spectroscopy (EIS) can detect pathological changes in a tendon and find the exact location of the lesion. Experimental tendinitis was induced by injecting collagenase into one side of the patellar tendons in rabbits, while the other side was used as the control. After measuring the impedance in the tendinitis and intact tendon tissue, the dissipation factor was computed. The real component of impedance and the dissipation factor turned out to be lower in tendinitis than in intact tissues. Moreover, the tendinitis dissipation factor spectrum showed a clear difference from that of the intact tendon, indicating its usefulness as a tool for detecting the location of the lesion. Pathologic findings from the tissues that were obtained after measuring the impedance confirmed the presence of characteristics of tendinitis. In conclusion, EIS is a useful method for diagnosing tendinitis and detecting the lesion location in invasive treatment.

  8. Bioelectric signaling regulates size in zebrafish fins.

    Directory of Open Access Journals (Sweden)

    Simon Perathoner

    2014-01-01

    Full Text Available The scaling relationship between the size of an appendage or organ and that of the body as a whole is tightly regulated during animal development. If a structure grows at a different rate than the rest of the body, this process is termed allometric growth. The zebrafish another longfin (alf mutant shows allometric growth resulting in proportionally enlarged fins and barbels. We took advantage of this mutant to study the regulation of size in vertebrates. Here, we show that alf mutants carry gain-of-function mutations in kcnk5b, a gene encoding a two-pore domain potassium (K(+ channel. Electrophysiological analysis in Xenopus oocytes reveals that these mutations cause an increase in K(+ conductance of the channel and lead to hyperpolarization of the cell. Further, somatic transgenesis experiments indicate that kcnk5b acts locally within the mesenchyme of fins and barbels to specify appendage size. Finally, we show that the channel requires the ability to conduct K(+ ions to increase the size of these structures. Our results provide evidence for a role of bioelectric signaling through K(+ channels in the regulation of allometric scaling and coordination of growth in the zebrafish.

  9. ANALYSIS OF INTERNALLY GENERATED NOISE OF BIOELECTRIC AMPLIFIERS

    Institute of Scientific and Technical Information of China (English)

    MashhourMustafaBaniAmer

    2003-01-01

    This papenr deals with internally generated noise of bioelectric amplifiers that are usually used for processing of bioelectric events.The main purpose of this paper is to present a procedure for analysis of the effects of internal noise generated by the active circuits and to evaluate the output noise of the author's new designed bioelectric amplifier that caused by internal effects to the amplifier circuit itself in order to compare it with the noise generated by conventional amplifiers.The obtained analysis results of internally generated noise showed that the total output noise of bioelectric active circuits does not increase when some of their resitors have a larger value.This behavior is caused by the different transfer functions for the signal and the respective noise sources associated with these resistors.Moreover,the new designed bioelectric amplifier haws an output noise less than that for conventional amplifiers.The obtained analysis results were also experimentally verified and the final conclusions were drawn.

  10. Effect of photostimulation on maize leaves’ bioelectrical response

    Directory of Open Access Journals (Sweden)

    M. P. Motsnyj

    2011-06-01

    Full Text Available Dynamics of the maize leaves’ biopotentials evoked by white, blue, green and red light stimuli with an intensity of 90 Lx illumination is analyzed. Qualitative similarity in dynamics of plant’s bioelectrical response to white and colored stimuli is determined. Hyperpolarization levels are quantitatively estimated for each experimental series. Dependence of the total hyperpolarization levels on the photostimulus wave length is detected. Mean amplitude of the hyperpolarization potentials lessens when the wave length decreases: from 57.7 mV under the red light to 27.7 mV under the blue one. Probable forms of bioelectrical response initiation in photostimulated plants are analyzed.

  11. Compost in plant microbial fuel cell for bioelectricity generation

    NARCIS (Netherlands)

    Moqsud, M.A.; Yoshitake, J.; Bushra, Q.S.; Hyodo, M.; Omine, K.; Strik, D.P.B.T.B.

    2015-01-01

    Recycling of organic waste is an important topic in developing countries as well as developed countries. Compost from organic waste has been used for soil conditioner. In this study, an experiment has been carried out to produce green energy (bioelectricity) by using paddy plant microbial fuel cells

  12. Carbon fiber enhanced bioelectricity generation in soil microbial fuel cells.

    Science.gov (United States)

    Li, Xiaojing; Wang, Xin; Zhao, Qian; Wan, Lili; Li, Yongtao; Zhou, Qixing

    2016-11-15

    The soil microbial fuel cell (MFC) is a promising biotechnology for the bioelectricity recovery as well as the remediation of organics contaminated soil. However, the electricity production and the remediation efficiency of soil MFC are seriously limited by the tremendous internal resistance of soil. Conductive carbon fiber was mixed with petroleum hydrocarbons contaminated soil and significantly enhanced the performance of soil MFC. The maximum current density, the maximum power density and the accumulated charge output of MFC mixed carbon fiber (MC) were 10, 22 and 16 times as high as those of closed circuit control due to the carbon fiber productively assisted the anode to collect the electron. The internal resistance of MC reduced by 58%, 83% of which owed to the charge transfer resistance, resulting in a high efficiency of electron transfer from soil to anode. The degradation rates of total petroleum hydrocarbons enhanced by 100% and 329% compared to closed and opened circuit controls without the carbon fiber respectively. The effective range of remediation and the bioelectricity recovery was extended from 6 to 20cm with the same area of air-cathode. The mixed carbon fiber apparently enhanced the bioelectricity generation and the remediation efficiency of soil MFC by means of promoting the electron transfer rate from soil to anode. The use of conductively functional materials (e.g. carbon fiber) is very meaningful for the remediation and bioelectricity recovery in the bioelectrochemical remediation.

  13. Bioelectric Control of a 757 Class High Fidelity Aircraft Simulation

    Science.gov (United States)

    Jorgensen, Charles; Wheeler, Kevin; Stepniewski, Slawomir; Norvig, Peter (Technical Monitor)

    2000-01-01

    This paper presents results of a recent experiment in fine grain Electromyographic (EMG) signal recognition, We demonstrate bioelectric flight control of 757 class simulation aircraft landing at San Francisco International Airport. The physical instrumentality of a pilot control stick is not used. A pilot closes a fist in empty air and performs control movements which are captured by a dry electrode array on the arm, analyzed and routed through a flight director permitting full pilot outer loop control of the simulation. A Vision Dome immersive display is used to create a VR world for the aircraft body mechanics and flight changes to pilot movements. Inner loop surfaces and differential aircraft thrust is controlled using a hybrid neural network architecture that combines a damage adaptive controller (Jorgensen 1998, Totah 1998) with a propulsion only based control system (Bull & Kaneshige 1997). Thus the 757 aircraft is not only being flown bioelectrically at the pilot level but also demonstrates damage adaptive neural network control permitting adaptation to severe changes in the physical flight characteristics of the aircraft at the inner loop level. To compensate for accident scenarios, the aircraft uses remaining control surface authority and differential thrust from the engines. To the best of our knowledge this is the first time real time bioelectric fine-grained control, differential thrust based control, and neural network damage adaptive control have been integrated into a single flight demonstration. The paper describes the EMG pattern recognition system and the bioelectric pattern recognition methodology.

  14. Use of bioelectrical impedance analysis to assess body composition in rural Gambian children

    NARCIS (Netherlands)

    Prins, M.; Hawkesworth, S.; Wright, A.; Fulford, A.J.C.; Jarjou, L.M.A.; Prentice, A.M.; Moore, S.E.

    2008-01-01

    Objective: To validate the Tanita BC-418MA Segmental Body Composition Analyser and four-site skinfold measurements for the prediction of total body water (TBW), percentage fat-free mass (% FFM) and percentage body fat (%BF) in a population of rural Gambian children. Subjects/Methods: One hundred and

  15. Bioelectrical impedance analysis (BIA): a proposal for standardization of the classical method in adults

    Science.gov (United States)

    González-Correa, C. H.; Caicedo-Eraso, J. C.

    2012-12-01

    The accuracy of BIA measurements is limited by different sources of error such as physical model, cross sectional area, ethnicity, body hydration, age and level of body fat among other variables. Equation for each population is required as they can produce overestimation when manufacturer's equations are used. The classical measurements hand to foot has shown better correlation against hydrodensitometry than foot to foot or hand to hand. However there is a lack for an accepted standard of BIA procedures. This is compounded when there is not a good report of the BIA study's methodology; hence the comparability between the results is poor and reduces the reliability of the method. Perhaps, standardization of methods would be the first step for BIA studies to move forward and subsequently improve its accuracy. Standardized procedures could also minimize the impact of these variables on studies results. The aim of this study was to propose a protocol as a checklist to standardize BIA procedures and produce comparable results from future studies performed with the classic hand-foot configuration in adults.

  16. Bioelectrical impedance analysis (BIA) equations validation against hydrodensitometry in a Colombian population

    Science.gov (United States)

    Caicedo-Eraso, J. C.; Gonzalez-Correa, C. A.; Gonzalez-Correa, C. H.

    2013-04-01

    Several studies have shown that the accuracy of BIA results depends of ethnicity, age, gender, hormonal and genetic variations and, so far, there are not specific equations for Colombian population. The purpose was to evaluate reported BIA equations to determine their usefulness in body composition assessment in young females from Colombia using hydrodensitometry as the reference method. A sample of 30 young females was evaluated. Inclusion and exclusion criteria were defined to minimize the variability of BIA. Height, weight, multi-frequency BIA, residual lung volume (RV) and underwater weight (UWW) were measured. Five BIA equations met the inclusion criteria of this study. Three equations overestimated and two equations underestimated body fat (BF). Paired Student t-test and Bland and Altman analysis (p<0.05) showed significant differences in four BIA equations. However, all standard error of estimate (SEE) to BF was greater than 2.7 kg. This study showed that the five selected BIA equations are not valid for estimation of body composition in young females from Colombia. It is recommended to develop BIA equations to improve BF fat assessment in our population.

  17. Feasibility of bioelectrical impedance analysis in children with a severe generalized cerebral palsy

    NARCIS (Netherlands)

    R. Veugelers (Rebekka); C. Penning (Corine); L. van Gulik (Laura); D. Tibboel (Dick); H.M. Evenhuis (Heleen)

    2006-01-01

    textabstractObjective: The need is strong for an accurate and easy-to-perform test to evaluate the nutritional state of children who have a severe generalized cerebral palsy, defined as a severe motor handicap and an intellectual disability. For that purpose, we determined the feasibility of bioelec

  18. Pengembangan Bioelectrical Impedance Sebagai Control Commands Pengaturan Kecepatan Gerak Kursi Roda Dengan Metoda PID Controller

    Directory of Open Access Journals (Sweden)

    Juli Sardi

    2014-09-01

    Full Text Available In the present study, bioimpedance signals of human body was utilized to control speed of a wheelchair movement. A bioimpedance is electrically passive part contained the body tissues. The research is one of alternative solutions for patients with paralysis of the upper and lower limb. Firstly, design of system of the research consisted of bioimpedance measuring instruments and a mechanical design of the wheelchair. Bioimpedance measurement was performed by injecting a sinusoidal current source of 0.5 mArms with a frequency of 50 kHz to muscle tissue (shoulder to obtain the output voltage in the range of 0-5 Vdc. With impulse and manual thresholding methods, the voltage signal was classified into several controls command to adjust the speed and direction of the wheelchair control based on PID Controller. The experimental result of the research was realization of bioimpedance signal that used as a reference to control the direction and speed of the wheelchair with a success rate of 86.7 %. A wheelchair velocity was classified into three types of motion, namely slow, medium and fast. Slow speed has a rated speed of 30 Cm/s, medium speed value speed of 40 Cm/s and fast speed value of 50 Cm/s. The wheelchair can also turn to the left and the right in accordance with the wishes of wheelchair user beside to moving forward.

  19. Malnutrition in remission of childhood cancers as assessed by bioelectric impedance analysis

    Directory of Open Access Journals (Sweden)

    M. V. Konovalova

    2014-07-01

    Full Text Available The results of our cross-sectional bioimpedance study of children aged 7–17 years cured of cancer during follow-up (patients’ group, n = 552, remission time range 0–15 years and of age-matched healthy controls (n = 1,500 show significant intergroup differences in body height and body composition parameters. The most pronounced alterations in the patients’ group were observed in standardized values of phase angle reflecting a sharp decrease in the percentage of metabolically active body cell mass in fat-free mass. Malnutrition, judged from the prevalence of obesity and low phase angle, was observed in 52.7 % of our patients reaching a maximum of 76.8 % in a subgroup of children with CNS tumors. In view of known association that exists between malnutrition and reduced tolerance to chemotherapy, increased susceptibility to infections and adverse outcomes rate, we recommend using bioimpedance analysis in remission of childhood cancers in order to monitoring and timely correction of nutritional state as well as for prevention of delayed cardiovascular risks.

  20. Malnutrition in remission of childhood cancers as assessed by bioelectric impedance analysis

    Directory of Open Access Journals (Sweden)

    M. V. Konovalova

    2012-01-01

    Full Text Available The results of our cross-sectional bioimpedance study of children aged 7–17 years cured of cancer during follow-up (patients’ group, n = 552, remission time range 0–15 years and of age-matched healthy controls (n = 1,500 show significant intergroup differences in body height and body composition parameters. The most pronounced alterations in the patients’ group were observed in standardized values of phase angle reflecting a sharp decrease in the percentage of metabolically active body cell mass in fat-free mass. Malnutrition, judged from the prevalence of obesity and low phase angle, was observed in 52.7 % of our patients reaching a maximum of 76.8 % in a subgroup of children with CNS tumors. In view of known association that exists between malnutrition and reduced tolerance to chemotherapy, increased susceptibility to infections and adverse outcomes rate, we recommend using bioimpedance analysis in remission of childhood cancers in order to monitoring and timely correction of nutritional state as well as for prevention of delayed cardiovascular risks.

  1. Sensitivity field distributions for segmental bioelectrical impedance analysis based on real human anatomy

    Science.gov (United States)

    Danilov, A. A.; Kramarenko, V. K.; Nikolaev, D. V.; Rudnev, S. G.; Salamatova, V. Yu; Smirnov, A. V.; Vassilevski, Yu V.

    2013-04-01

    In this work, an adaptive unstructured tetrahedral mesh generation technology is applied for simulation of segmental bioimpedance measurements using high-resolution whole-body model of the Visible Human Project man. Sensitivity field distributions for a conventional tetrapolar, as well as eight- and ten-electrode measurement configurations are obtained. Based on the ten-electrode configuration, we suggest an algorithm for monitoring changes in the upper lung area.

  2. [ABDOMINAL BIOELECTRICAL IMPEDANCE ANALYSIS AND ANTHROPOMETRY FOR PREDICTING METABOLIC SYNDROME IN MIDDLE AGED MEN].

    Science.gov (United States)

    Fernández-Vázquez, Rosalía; Millán Romero, Ángel; Barbancho, Miguel Ángel; Alvero-Cruz, José Ramón

    2015-09-01

    Objetivo: la obesidad central tiene una gran relación con el síndrome metabólico. Estudiar la relación de la grasa del tronco, el índice de grasa visceral y las medidas antropométricas con el síndrome metabólico. Métodos: diseño: transversal descriptivo y correlacional. Participaron 75 varones, voluntarios, de distintas profesiones, que accedieron a un reconocimiento médico- laboral, con un rango de edad de 21 a 59 años. Mediciones de peso, talla, índice de masa corporal, perímetro abdominal, perímetro glúteo, índice cintura-cadera y grasa de tronco y nivel de grasa visceral mediante bioimpedanciometría (Tanita AB-140-ViScan) y parámetros bioquímicos: glucosa, colesterol total y triglicéridos. Así mismo, se midió la presión arterial sistólica y diastólica. Se comparan los estados de síndrome metabólico, sobrepeso y obesidad. Resultados: existen correlaciones de las medidas antropométricas con la de grasa de tronco y el nivel de grasa visceral, así como con los parámetros bioquímicos (p obesidad y síndrome metabólico. Conclusiones: la grasa de tronco y los niveles de grasa visceral son muy sensibles y específicos para la detección del síndrome metabólico y la obesidad, aunque no superan a las variables e índices antropométricos. En la condición de sobrepeso, la grasa de tronco y visceral son medidas algo más predictivas que las variables antropométricas.

  3. Application of body mass index adjusted for fat mass (BMIfat obtained by bioelectrical impedance in adults

    Directory of Open Access Journals (Sweden)

    Mírele Savegnago Mialich

    2014-08-01

    Full Text Available Introduction: Body mass index (BMI has been one of the methods most frequently used for diagnose obesity, but it isn't consider body composition. Objective: This study intends to apply one new adiposity index, the BMI adjusted for fat mass (BMIfat developed by Mialich, et al. (2011, in a adult Brazilian sample. Methods: A cross-sectional study with 501 individuals of both genders (366 women, 135 men aged 17 to 38 years and mean age was 20.4 ± 2.8 years, mean weight 63.0 ± 13.5 kg, mean height 166.9 ± 9.0 cm, and BMI 22.4 ± 3.4 kg/m². Results and discussion: High and satisfactory R2 values were obtained, i.e., 91.1%, 91.9% and 88.8% for the sample as a whole and for men and women, respectively. Considering this BMIfat were developed new ranges, as follows: 1.35 to 1.65 (nutritional risk for malnutrition, > 1.65 and ≤ 2.0 (normal weight and > 2.0 (obesity. The BMIfat had a more accurate capacity of detecting obese individuals (0.980. 0.993, 0.974 considering the sample as a whole and women and men, respectively, compared to the traditional BMI (0.932, 0.956, 0.95. Were also defined new cut-off points for the traditional BMI for the classification of obesity, i.e.: 25.24 kg/m² and 28.38 kg/m² for men and women, respectively. Conclusion: The BMIfat was applied for the present population and can be adopted in clinical practice. Further studies are needed to determine its application to different ethnic groups and to compare this index to others previously described in the scientific literature.

  4. Prediction of percentage body fat from anthropometry and bioelectrical impedance in Singaporean and Beijing Chinese

    NARCIS (Netherlands)

    Deurenberg, P.; Deurenberg-Yap, M.; Jingzhong Wang,; Fu Po Lin,; Schmidt, G.

    2000-01-01

    Body composition was measured in 205 male and female Beijing Chinese and in 148 male and female Singaporean Chinese, age 34 (mean) (range 18-68) years and body mass index (BMI) 22.3 (15.9-38.5) kg/m 2. In Beijing Siri's two-compartment model based on densitometry was used as a reference technique an

  5. Bioelectrical impedance analysis (BIA) for sarcopenic obesity (SO) diagnosis in young female subjects

    Science.gov (United States)

    González-Correa, C. H.; Caicedo-Eraso, J. C.; S, Villada-Gomez J.

    2013-04-01

    Sarcopenia is defined as a loss of muscle mass depending of ageing and affecting physical function (definition A). A new definition considers excluding mass reduction criterion (definition B). Obesity is pandemic and occurs at all ages. Sarcopenic obesity (SO) implies both processes. The purpose of this study was to compare the results obtained after applying these 2 definitions in 66 aged 22 ± 2.8 years overweight or obese young college women. Percentage body fat (%BF) and skeletal mass index (SMI) were estimated by BIA, muscle function by handgrip strength test (HGS) and physical performance by Harvard step test (HST). There were 9.1% and 90.9% overweight or obese subjects. Twenty nine subjects (43.9%) had decreased HGS and 22 (33.3%) had impaired physical performance. One obese subject (1.5%) met the criteria for sarcopenic obesity by definition A and 9 (13.6%) by definition B. Although a linear regression (α obese, the problematic of SO will be found earlier in life.

  6. EFFECTS OF FOOD AND DRINK INGESTION ON BODY COMPOSITION VARIABLES OF ABDOMINAL BIOELECTRICAL IMPEDANCE.

    Science.gov (United States)

    Fernández Vázquez, Rosalía; Martínez Blanco, Javier; García Vega, María del Mar; Barbancho, Miguel Ángel; Alvero-Cruz, José Ramón

    2015-11-01

    Objetivo: conocer los cambios en la grasa del tronco y el nivel de grasa visceral determinado por BIA abdominal, así como otras medidas antropométricas relacionadas con la grasa abdominal o central después de la ingestión de una comida. Métodos: se realizó un protocolo experimental para evaluar un estudio descriptivo de intervención longitudinal. Los participantes fueron 21 sujetos (10 hombres y 11 mujeres), voluntarios que tuvieron acceso a una evaluación médica, con una edad de 74 años ± 13,43. Las mediciones antropométricas fueron: circunferencia de la cintura máxima en posición de pie, circunferencia de la cintura a nivel del ombligo en posición de decúbito supino y diámetro sagital abdominal (SAD). Además se obtuvo la grasa del tronco y el nivel de grasa visceral, por análisis de impedancia bioeléctrica abdominal, con un dispositivo Tanita AB-140 (ViScan), todo ello antes y después de una ración de comida. Resultados: las medidas antropométricas, como la circunferencia de la cintura en posición supina y SAD, no mostraron diferencias significativas (P > 0,05), después de la ingestión de alimentos, a excepción de un aumento significativo de la circunferencia de la cintura máxima en posición de pie (P 0,05). Los cambios porcentuales de las medidas fueron menores del 2% para la circunferencia de la cintura en posición de pie, para la circunferencia de cintura por Viscan, para el diámetro sagital abdominal y la grasa del tronco, y un 5,9% para el nivel de grasa visceral. Conclusiones: los efectos de una comida y bebida sobre la grasa del tronco y el nivel de grasa visceral, medidas por impedancia bioeléctrica abdominal, son mínimas, aunque siempre es recomendable hacerlo en condiciones de ayuno.

  7. Electrical impedance spectroscopy (EIS)-based evaluation of biological tissue phantoms to study multifrequency electrical impedance tomography (Mf-EIT) systems

    KAUST Repository

    Bera, Tushar Kanti

    2016-03-18

    Abstract: Electrical impedance tomography (EIT) phantoms are essential for the calibration, comparison and evaluation of the EIT systems. In EIT, the practical phantoms are typically developed based on inhomogeneities surrounded by a homogeneous background to simulate a suitable conductivity contrast. In multifrequency EIT (Mf-EIT) evaluation, the phantoms must be developed with the materials which have recognizable or distinguishable impedance variations over a wide range of frequencies. In this direction the impedance responses of the saline solution (background) and a number vegetable and fruit tissues (inhomogeneities) are studied with electrical impedance spectroscopy (EIS) and the frequency responses of bioelectrical impedance and conductivity are analyzed. A number of practical phantoms with different tissue inhomogeneities and different inhomogeneity configurations are developed and the multifrequency impedance imaging is studied with the Mf-EIT system to evaluate the phantoms. The conductivity of the vegetable inhomogeneities reconstructed from the EIT imaging is compared with the conductivity values obtained from the EIS studies. Experimental results obtained from multifrequency EIT reconstruction demonstrate that the electrical impedance of all the biological tissues inhomogenity decreases with frequency. The potato tissue phantom produces better impedance image in high frequency ranges compared to the cucumber phantom, because the cucumber impedance at high frequency becomes lesser than that of the potato at the same frequency range. Graphical Abstract: [Figure not available: see fulltext.] © 2016 The Visualization Society of Japan

  8. Transformerless High-Quality Electrocardiogram and Body Impedance Recording by an Amplifier with Current-Driven Inputs

    Directory of Open Access Journals (Sweden)

    Dobrev D.

    2009-12-01

    Full Text Available Measurement and recording of changes in bioelectrical impedance in vivo has become a widely used method with various clinical applications. It includes basal impedance Zo, relative changes ΔZ or its derivative dZ. Many applications related to cardiac and respiratory function require simultaneous electrocardiogram, impedance cardiogram and/or respiration signals recording and analysis. Accurate recording of body impedance is limited by high common mode voltages at the amplifier inputs combined with the influence of the output impedance of the used current source. A circuit concept for a simultaneous high-quality electrocardiogram and bioimpedance acquisition is proposed, profiting from advantages offered by a previously specially designed amplifier with current-driven inputs, yielding to low common mode and high differential mode input impedances.

  9. Application of dynamic impedance spectroscopy to atomic force microscopy

    Directory of Open Access Journals (Sweden)

    Kazimierz Darowicki, Artur Zieliński and Krzysztof J Kurzydłowski

    2008-01-01

    Full Text Available Atomic force microscopy (AFM is a universal imaging technique, while impedance spectroscopy is a fundamental method of determining the electrical properties of materials. It is useful to combine those techniques to obtain the spatial distribution of an impedance vector. This paper proposes a new combining approach utilizing multifrequency scanning and simultaneous AFM scanning of an investigated surface.

  10. Heterogeneous silicon mesostructures for lipid-supported bioelectric interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Yuanwen; Carvalho-de-Souza, João L.; Wong, Raymond C. S.; Luo, Zhiqiang; Isheim, Dieter; Zuo, Xiaobing; Nicholls, Alan W.; Jung, Il Woong; Yue, Jiping; Liu, Di-Jia; Wang, Yucai; De Andrade, Vincent; Xiao, Xianghui; Navrazhnykh, Luizetta; Weiss, Dara E.; Wu, Xiaoyang; Seidman, David N.; Bezanilla, Francisco; Tian, Bozhi

    2016-06-27

    Silicon-based materials have widespread application as biophysical tools and biomedical devices. Here we introduce a biocompatible and degradable mesostructured form of silicon with multi-scale structural and chemical heterogeneities. The material was synthesized using mesoporous silica as a template through a chemical vapour deposition process. It has an amorphous atomic structure, an ordered nanowire-based framework and random submicrometre voids, and shows an average Young’s modulus that is 2–3 orders of magnitude smaller than that of single-crystalline silicon. In addition, we used the heterogeneous silicon mesostructures to design a lipid-bilayer-supported bioelectric interface that is remotely controlled and temporally transient, and that permits non-genetic and subcellular optical modulation of the electrophysiology dynamics in single dorsal root ganglia neurons. Our findings suggest that the biomimetic expansion of silicon into heterogeneous and deformable forms can open up opportunities in extracellular biomaterial or bioelectric systems.

  11. NOVEL DESIGN OF A BIOELECTRIC AMPLIFIER WITH MINIMIZED MAGNITUDE AND PHASE ERRORS

    Institute of Scientific and Technical Information of China (English)

    Mashhour Bani Amer; Assistant Professor

    2001-01-01

    A new design of a bioelectric amplifier that has better parameters than conventional designs is presented. The design allows the construction of bioelectric amplifier with improved parameters in terms of common-mode rejection ratio and phase and magnitude errors. The voltage gain is easily adapted to a wide range of biomedical applications. The experimental and simulation results of the designed bioelectric amplifier are also included.

  12. NEUROFEEDBACK INFLUENCE ON CEREBRUM BIOELECTRICAL ACTIVITY IN GYMNASTS-WOMEN

    Directory of Open Access Journals (Sweden)

    T. Yu. Strizhkova

    2013-01-01

    Full Text Available The analysis of electroencephalogram (EEG of highly skilled gymnasts-women (main group – 49, control group – 39 showed the availability of cerebrum bioelectrical activity features of sportswomen connected with left hemisphere dominance, predominance of theta-rhythm power and lower reaction to eyes closing, also character of neurodynamic changes generated by neurofeedback course depended on ovarian-menstrual cycle phases.

  13. [Endocrine obesity: bioelectric profiles (biotypes) detected in the body composition].

    Science.gov (United States)

    Miggiano, G A D; Petitti, T

    2004-09-01

    136 patients were selected (16 men and 120 women with non-specific menstrual disturbances) with a BMI (Body Mass Index) between 25 and 45 kg/m2, which were diagnosed with "disendocrinia" (GH deficit, hyperadrenocorticism, hypothyroidsm, hyperandrogenism, menstrual cycle disorders). The proposed approach, based on the visualization of the value distribution of the electric measures in different graphics, is able to immediately explain the bioelectric state of the individual's lean-mass. Subjects with hypothyroidism present, along with their overweight, less bio-conducting mass, with an altered fluid intra/extra-cellular distribution. Patients with hyperadrenocorticism show instead an hyperhydratation of the body mass, especially in the extracellular level. Patients with menstrual disorders (amenorrea, polycystic ovary syndrome, anovulatory cycle etc...) present a lean mass reduction (elevated Rs) and an increase of the intra-cellular compartment (elevated-Xc). Patients with hyper-androgenism (and hirsutism) show a characteristic bioelectric "pattern", with low Rs levels and high Xc levels. Subjects with GH deficit (men and women), has a trend of documenting bioelectric measures with lower lean mass and higher fat-mass. Different electric biotypes seem to characterize the body composition in the several endocrine disorders.

  14. Frequency Bandwidth of Half-Wave Impedance Repeater

    Directory of Open Access Journals (Sweden)

    Marek Dvorsky

    2012-01-01

    Full Text Available This article brings in the second part general information about half-wave impedance repeater. The third part describes the basic functional principles of the half-wave impedance repeater using Smith chart. The main attention is focused in part four on the derivation of repeater frequency bandwidth depending on characteristics and load impedance of unknown feeder line. Derived dependences are based on the elementary features of the feeder lines with specific length. The described functionality is proved in part 4.3 by measurement of transformed impedance using vector several unbalanced feeder lines and network analyzer VNWA3+.

  15. Bioelectrical signal processing in cardiac and neurological applications and electromyography: physiology, engineering, and noninvasive applications

    Directory of Open Access Journals (Sweden)

    Valentinuzzi Max E

    2007-07-01

    Full Text Available Abstract The present article reviews two recent books dealing with rather closely related subjects; in fact, they tend to complement and supplement reciprocally. Obviously, the electromyogram is a bioelectrical signal that often is mathematically manipulated in different ways to better extract its information. Moreover, its correlation with other bioelectric variables may become necessary.

  16. Wakefields and coupling impedances

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Superconducting Super Collider Laboratory, 2550 Beckleymeade Ave., Dallas, Texas 75237 (United States))

    1995-02-01

    After a short introduction of the wake potentials and coupling impedances, a few new results in impedance calculations are discussed. The first example is a new analytical method for calculating impedances of axisymmetric structures in the low frequency range, below the cutoff frequency of the vacuum chamber. The second example demonstrates that even very small discontinuities on a smooth waveguide can result in appearance of trapped modes, with frequencies slightly below the waveguide cutoff frequency. The high-frequency (above the cutoff) behavior of the coupling impedance of many small discontinuities is discussed in the third example. [copyright] 1995 [ital American] [ital Institute] [ital of] [ital Physics

  17. Wakefields and coupling impedances

    Science.gov (United States)

    Kurennoy, Sergey

    1995-02-01

    After a short introduction of the wake potentials and coupling impedances, a few new results in impedance calculations are discussed. The first example is a new analytical method for calculating impedances of axisymmetric structures in the low frequency range, below the cutoff frequency of the vacuum chamber. The second example demonstrates that even very small discontinuities on a smooth waveguide can result in appearance of trapped modes, with frequencies slightly below the waveguide cutoff frequency. The high-frequency (above the cutoff) behavior of the coupling impedance of many small discontinuities is discussed in the third example.

  18. Impedance plethysmography of thoracic region: impedance cardiography.

    Directory of Open Access Journals (Sweden)

    Deshpande A

    1990-10-01

    Full Text Available Impedance plethysmograms were recorded from thoracic region in 254 normal subjects, 183 patients with coronary artery disease, 391 patients with valvular heart disease and 107 patients with congenital septal disorder. The data in 18 normal subjects and 55 patients showed that basal impedance decreases markedly during exercise in patients with ischaemic heart disease. Estimation of cardiac index by this technique in a group of 99 normal subjects has been observed to be more consistent than that of the stroke volume. Estimation of systolic time index from impedance plethysmograms in 34 normal subjects has been shown to be as reliable as that from electrocardiogram, phonocardiogram and carotid pulse tracing. Changes in the shape of plethysmographic waveform produced by valvular and congenital heart diseases are briefly described and the role of this technique in screening cardiac patients has been highlighted.

  19. Bioelectricity production from various wastewaters through microbial fuel cell technology

    Directory of Open Access Journals (Sweden)

    Abhilasha S Mathuriya

    2009-12-01

    Full Text Available Microbial fuel cell technology is a new type of renewable and sustainable technology for electricity generation since it recovers energy from renewable materials that can be difficult to dispose of, such as organic wastes and wastewaters. In the present contribution we demonstrated electricity production by beer brewery wastewater, sugar industry wastewater, dairy wastewater, municipal wastewater and paper industry wastewater. Up to 14.92 mA current and 90.23% COD removal was achieved in 10 days of operation. Keywords: Bioelectricity, COD, Microbial Fuel Cells, Wastewater Received: 12 November 2009 / Received in revised form: 30 November 2009, Accepted: 30 November 2009, Published online: 10 March 2010

  20. Bio-isolated dc operational amplifier. [for bioelectric measurements

    Science.gov (United States)

    Lee, R. D. (Inventor)

    1974-01-01

    A bio-isolated dc operational amplifier is described for use in making bioelectrical measurements of a patient while providing isolation of the patient from electrical shocks. The circuit contains a first operational amplifier coupled to the patient with its output coupled in a forward loop through a first optic coupler to a second operational amplifier. The output of the second operational amplifier is coupled to suitable monitoring circuitry via a feedback circuit including a second optic coupler to the input of the first operational amplifier.

  1. An impedance grasping strategy

    NARCIS (Netherlands)

    Muñoz Arias, Mauricio; Scherpen, Jacqueline M.A.; Macchelli, Alessandro

    2014-01-01

    This work is devoted to an impedance grasping strategy for a class of standard mechanical systems in the port- Hamiltonian framework. The presented control strategy re- quires a set of coordinate transformations, since the impedance control in the port-Hamiltonian framework with structure preservati

  2. [Approaches to reduce the retroaction of long-term monitoring of bioelectric events in ergonomic field studies (author's transl)].

    Science.gov (United States)

    Zipp, P; Faber, S

    1979-10-01

    When monitoring bioelectric signals the surface electrodes can cause a retroaction on the subject thereby introducing an error of measurement. There are two types of retroaction: physical and psycho-physiological. A physical retroaction due to the hydration process of the skin occurs if 'wet' electrodes are used for the recording of the skin conductance level (SCL) causing a continuous drift of the SCL and a decrease in sensitivity to SCL changes. Therefore a dry electrode was developed with improved performance: It exhibits less sensitivity to motion, is not subject to polarization, and features better SCL long-term stability. When recording the electrocardiogram or the electromyogram a psychophysiological retroaction occurs due to the annoyance caused by the skin-irritating abrading techniques in order to decrease the skin impedance and reduce the motion artifact. In an attempt to abandon the skin preparation whenever permissible without sacrificing the measurement accuracy a performance estimation procedure was developed. Basing on the information on the signal frequency content, the electrode contact area, the required accuracy of measurement and the amplifier input impedance a decision on the necessity of skin preparation is made. Moreover, the results of a study are reported investigating the reduction of motion artifacts by means of electrode design and appropriate electrode jelly formulation.

  3. Introducing Vectors.

    Science.gov (United States)

    Roche, John

    1997-01-01

    Suggests an approach to teaching vectors that promotes active learning through challenging questions addressed to the class, as opposed to subtle explanations. Promotes introducing vector graphics with concrete examples, beginning with an explanation of the displacement vector. Also discusses artificial vectors, vector algebra, and unit vectors.…

  4. Compost in plant microbial fuel cell for bioelectricity generation.

    Science.gov (United States)

    Moqsud, M A; Yoshitake, J; Bushra, Q S; Hyodo, M; Omine, K; Strik, David

    2015-02-01

    Recycling of organic waste is an important topic in developing countries as well as developed countries. Compost from organic waste has been used for soil conditioner. In this study, an experiment has been carried out to produce green energy (bioelectricity) by using paddy plant microbial fuel cells (PMFCs) in soil mixed with compost. A total of six buckets filled with the same soil were used with carbon fiber as the electrodes for the test. Rice plants were planted in five of the buckets, with the sixth bucket containing only soil and an external resistance of 100 ohm was used for all cases. It was observed that the cells with rice plants and compost showed higher values of voltage and power density with time. The highest value of voltage showed around 700 mV when a rice plant with 1% compost mixed soil was used, however it was more than 95% less in the case of no rice plant and without compost. Comparing cases with and without compost but with the same number of rice plants, cases with compost depicted higher voltage to as much as 2 times. The power density was also 3 times higher when the compost was used in the paddy PMFCs which indicated the influence of compost on bio-electricity generation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Optically Controlled Oscillators in an Engineered Bioelectric Tissue

    Science.gov (United States)

    McNamara, Harold M.; Zhang, Hongkang; Werley, Christopher A.; Cohen, Adam E.

    2016-07-01

    Complex electrical dynamics in excitable tissues occur throughout biology, but the roles of individual ion channels can be difficult to determine due to the complex nonlinear interactions in native tissue. Here, we ask whether we can engineer a tissue capable of basic information storage and processing, where all functional components are known and well understood. We develop a cell line with four transgenic components: two to enable collective propagation of electrical waves and two to enable optical perturbation and optical readout of membrane potential. We pattern the cell growth to define simple cellular ring oscillators that run stably for >2 h (˜104 cycles ) and that can store data encoded in the direction of electrical circulation. Using patterned optogenetic stimulation, we probe the biophysical attributes of this synthetic excitable tissue in detail, including dispersion relations, curvature-dependent wave front propagation, electrotonic coupling, and boundary effects. We then apply the biophysical characterization to develop an optically reconfigurable bioelectric oscillator. These results demonstrate the feasibility of engineering bioelectric tissues capable of complex information processing with optical input and output.

  6. Impedance and Collective Effects

    CERN Document Server

    Metral, E; Rumolo, R; Herr, W

    2013-01-01

    This document is part of Subvolume C 'Accelerators and Colliders' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Chapter '4 Impedance and Collective Effects' with the content: 4 Impedance and Collective Effects Introduction 4.1 Space Charge 4.2 Wake Fields and Impedances 4.3 Coherent Instabilities 4.4 Landau Damping 4.5 Two-Stream Effects (Electron Cloud and Ions) 4.6 Beam-Beam Effects 4.7 Numerical Modelling

  7. Lactate threshold by muscle electrical impedance in professional rowers

    Science.gov (United States)

    Jotta, B.; Coutinho, A. B. B.; Pino, A. V.; Souza, M. N.

    2017-04-01

    Lactate threshold (LT) is one of the physiological parameters usually used in rowing sport training prescription because it indicates the transitions from aerobic to anaerobic metabolism. Assessment of LT is classically based on a series of values of blood lactate concentrations obtained during progressive exercise tests and thus has an invasive aspect. The feasibility of noninvasive LT estimative through bioelectrical impedance spectroscopy (BIS) data collected in thigh muscles during rowing ergometer exercise tests was investigated. Nineteen professional rowers, age 19 (mean) ± 4.8 (standard deviation) yr, height 187.3 ± 6.6 cm, body mass 83 ± 7.7 kg, and training experience of 7 ± 4 yr, were evaluated in a rowing ergometer progressive test with paired measures of blood lactate concentration and BIS in thigh muscles. Bioelectrical impedance data were obtained by using a bipolar method of spectroscopy based on the current response to a voltage step. An electrical model was used to interpret BIS data and to derive parameters that were investigated to estimate LT noninvasively. From the serial blood lactate measurements, LT was also determined through Dmax method (LTDmax). The zero crossing of the second derivative of kinetic of the capacitance electrode (Ce), one of the BIS parameters, was used to estimate LT. The agreement between the LT estimates through BIS (LTBIS) and through Dmax method (LTDmax) was evaluated using Bland-Altman plots, leading to a mean difference between the estimates of just 0.07 W and a Pearson correlation coefficient r = 0.85. This result supports the utilization of the proposed method based on BIS parameters for estimating noninvasively the lactate threshold in rowing.

  8. Accurate monitoring of intravascular fluid volume: A novel application of intrathoracic impedance measures for the guidance of volume reduction therapy

    Directory of Open Access Journals (Sweden)

    Barbara A. Lara

    2015-09-01

    Conclusion: Impedance vectors derived from a multivector monitoring system reflect changes in intravascular plasma volume. Two of these vectors most closely track changes in plasma volume and may be used to more accurately guide and optimize volume reduction therapy.

  9. Impedance and component heating

    CERN Document Server

    Métral, E; Mounet, N; Pieloni, T; Salvant, B

    2015-01-01

    The impedance is a complex function of frequency, which represents, for the plane under consideration (longitudinal, horizontal or vertical), the force integrated over the length of an element, from a “source” to a “test” wave, normalized by their charges. In general, the impedance in a given plane is a nonlinear function of the test and source transverse coordinates, but it is most of the time sufficient to consider only the first few linear terms. Impedances can influence the motion of trailing particles, in the longitudinal and in one or both transverse directions, leading to energy loss, beam instabilities, or producing undesirable secondary effects such as excessive heating of sensitive components at or near the chamber wall, called beam-induced RF heating. The LHC performance limitations linked to impedances encountered during the 2010-2012 run are reviewed and the currently expected situation during the HL-LHC era is discussed.

  10. The LEP impedance model

    Energy Technology Data Exchange (ETDEWEB)

    Zotter, B. [European Organization for Nuclear Research, Geneva (Switzerland)

    1996-08-01

    This report describes a number of measurements and computations of the impedance of the Large Electron Positron collider LEP at CERN. The work has been performed over several years, together with D. Brandt, K. Cornelis, A. Hofmann, G. Sabbi and many others. The agreement between measurements of single bunch instabilities on the machine and computer simulations is in general excellent and gives confidence in the impedance model used. (author)

  11. Electrical impedance of acupuncture meridians: the relevance of subcutaneous collagenous bands.

    Directory of Open Access Journals (Sweden)

    Andrew C Ahn

    Full Text Available BACKGROUND: The scientific basis for acupuncture meridians is unknown. Past studies have suggested that acupuncture meridians are physiologically characterized by low electrical impedance and anatomically associated with connective tissue planes. We are interested in seeing whether acupuncture meridians are associated with lower electrical impedance and whether ultrasound-derived measures--specifically echogenic collagenous bands--can account for these impedance differences. METHODS/RESULTS: In 28 healthy subjects, we assessed electrical impedance of skin and underlying subcutaneous connective tissue using a four needle-electrode approach. The impedances were obtained at 10 kHz and 100 kHz frequencies and at three body sites - upper arm (Large Intestine meridian, thigh (Liver, and lower leg (Bladder. Meridian locations were determined by acupuncturists. Ultrasound images were obtained to characterize the anatomical features at each measured site. We found significantly reduced electrical impedance at the Large Intestine meridian compared to adjacent control for both frequencies. No significant decrease in impedance was found at the Liver or Bladder meridian. Greater subcutaneous echogenic densities were significantly associated with reduced impedances in both within-site (meridian vs. adjacent control and between-site (arm vs. thigh vs. lower leg analyses. This relationship remained significant in multivariable analyses which also accounted for gender, needle penetration depth, subcutaneous layer thickness, and other ultrasound-derived measures. CONCLUSION/SIGNIFICANCE: Collagenous bands, represented by increased ultrasound echogenicity, are significantly associated with lower electrical impedance and may account for reduced impedances previously reported at acupuncture meridians. This finding may provide important insights into the nature of acupuncture meridians and the relevance of collagen in bioelectrical measurements.

  12. Bioelectricity-AQA, one of the first MOOC courses in engineering.

    Science.gov (United States)

    Barr, Roger C

    2014-01-01

    Bioelectricity-AQA was one of the first massively open online courses in engineering, having been given the first time via Coursera starting in September, 2012. This report provides some detail on its background, presentation, enrollment, and lessons learned.

  13. Finemet cavity impedance studies

    CERN Document Server

    Persichelli, S; Migliorati, M; Salvant, B

    2013-01-01

    The aim of the study is to evaluate the impedance of the Finemet kicker cavity to be installed in the PS straight section 02 during LS1, under realistic assumptions of bunch length. Time domain simulations with CST Particle Studio have been performed in order to get the impedance of the cavity and make a comparison with the longitudinal impedance measured for a single cell prototype. The study has been performed on simplified 3D geometries imported from a mechanical CATIA drawing, assuming that the simplications have small impact on the nal results. Simulations confirmed that the longitudinal impedance observed with measurements can be excited by bunches circulating in the PS. In the six-cells Finemet cavity, PS bunches circulating in the center can excite a longitudinal impedance, the real part of which has a maximum of 2 kOhm at 4 MHz. This mode does not seem to have any transverse component. All the eigenmodes of the cavity are strongly damped by the Finemet rings: we predict to have no issues regarding tr...

  14. Response Characteristics of Plant Bioelectric Potential to Light Intensity Indoor and Outdoor

    Science.gov (United States)

    Shimbo, Tatsuya; Fujii, Masaki; Sawada, Ayako; Oyabu, Takashi; Kimura, Haruhiko

    Plant is affected by environmental factors. For example, these are temperature, humidity and light intensity. The light intensity affected strongly to the plant. The plant produces glucose and oxygen with photosynthesis. Moreover, light intensity is important to purify the contaminants in the atmosphere. In this study, it was examined whether the plant is affected by temperature, wind grade and soil moisture using bioelectric potential characteristics of the plant. Especially plant bioelectric potential to light intensity change was measured. The measurement was carried out in indoor and outdoor. As for the result, the differences of plant bioelectric potential characteristics in the indoor and outdoor were recognized. At that analysis, the integrated value of plant bioelectric potential for 1 minute (vm1) was adopted. Moreover, a high correlation was indicated between the vm1 and light intensity. The correlation coefficient was R2=0.94. It becomes obvious that the plant is affected strongly by light intensity and the plant can understand the environmental factors like light intensity. The characteristics are found by measuring bioelectric potential of the plant. The environmental sensing can be possible by the use of the plant bioelectric potential.

  15. Impedance modelling of pipes

    Science.gov (United States)

    Creasy, M. Austin

    2016-03-01

    Impedance models of pipes can be used to estimate resonant frequencies of standing waves and model acoustic pressure of closed and open ended pipes. Modelling a pipe with impedance methods allows additional variations to the pipe to be included in the overall model as a system. Therefore an actuator can be attached and used to drive the system and the impedance model is able to include the dynamics of the actuator. Exciting the pipe system with a chirp signal allows resonant frequencies to be measured in both the time and frequency domain. The measurements in the time domain are beneficial for introducing undergraduates to resonances without needing an understanding of fast Fourier transforms. This paper also discusses resonant frequencies in open ended pipes and how numerous texts incorrectly approximate the resonant frequencies for this specific pipe system.

  16. Impeded Dark Matter

    CERN Document Server

    Kopp, Joachim; Slatyer, Tracy R; Wang, Xiao-Ping; Xue, Wei

    2016-01-01

    We consider a new class of thermal dark matter models, dubbed "Impeded Dark Matter", in which the mass splitting between the dark matter particles and their annihilation products is tiny. Compared to the previously proposed Forbidden Dark Matter scenario, the mass splittings we consider are much smaller, and are allowed to be either positive or negative. We demonstrate that either case can be easily realized without requiring tuning of model parameters. For negative mass splitting, we demonstrate that the annihilation cross-section for Impeded Dark Matter depends linearly on the dark matter velocity or may even be kinematically forbidden, making this scenario almost insensitive to constraints from the cosmic microwave background and from observations of dwarf galaxies. Accordingly, it may be possible for Impeded Dark Matter to yield observable signals in clusters or the Galactic center, with no corresponding signal in dwarfs. For positive mass splitting, we show that the annihilation cross-section is suppress...

  17. Negative transverse impedance

    Energy Technology Data Exchange (ETDEWEB)

    Chou, W.

    1989-06-12

    Recently, measurements in the SPS show that the coherent tune shift in the horizontal direction has positive values whereas that in the vertical direction has negative ones. Thus the existence of negative transverse impedance gets confirmed in a real machine. This stimulates us to start a new round of systematic studies on this interesting phenomenon. The results obtained from our computer simulations are presented in this note. Our simulations demonstrate that the negative transverse impedance may appear when the rotational symmetry embedded in a discontinuity is broken, and that the geometries that we have studies may be the source of the positive horizontal tune shift measured in the SPS.

  18. Impedance of accelerator components

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, J.N. [Center for Beam Physics, Lawrence Berkeley National Laboratory, I Cyclotron Road, Berkeley, California 94720 (United States)

    1997-01-01

    As demands for high luminosity and low emittance particle beams increase, an understanding of the electromagnetic interaction of these beams with their vacuum chamber environment becomes more important in order to maintain the quality of the beam. This interaction is described in terms of the wake field in time domain, and the beam impedance in frequency domain. These concepts are introduced, and related quantities such as the loss factor are presented. The broadband Q=1 resonator impedance model is discussed. Perturbation and coaxial wire methods of measurement of real components are reviewed. {copyright} {ital 1997 American Institute of Physics.}

  19. Longitudinal impedance of RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Blaskiewicz, M. [Brookhaven National Lab. (BNL), Upton, NY (United States); Brennan, J. M. [Brookhaven National Lab. (BNL), Upton, NY (United States); Mernick, K. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-03

    The longitudinal impedance of the two RHIC rings has been measured using the effect of potential well distortion on longitudinal Schottky measurements. For the blue RHIC ring Im(Z/n) = 1.5±0.2Ω. For the yellow ring Im(Z/n) = 5.4±1Ω.

  20. Impedance plethysmography: basic principles.

    Directory of Open Access Journals (Sweden)

    Babu J

    1990-04-01

    Full Text Available Impedance Plethysmography technique has been discussed with explanation of two compartment model and parallel conductor theory for the estimation of peripheral blood flow and stroke volume. Various methods for signal enhancement to facilitate computation of blood flow are briefly described. Source of error in the estimation of peripheral blood flow is identified and the correction has been suggested.

  1. Implantable Impedance Plethysmography

    OpenAIRE

    2014-01-01

    We demonstrate by theory, as well as by ex vivo and in vivo measurements that impedance plethysmography, applied extravascularly directly on large arteries, is a viable method for monitoring various cardiovascular parameters, such as blood pressure, with high accuracy. The sensor is designed as an implant to monitor cardiac events and arteriosclerotic progression over the long term.

  2. Implantable Impedance Plethysmography

    Directory of Open Access Journals (Sweden)

    Michael Theodor

    2014-08-01

    Full Text Available We demonstrate by theory, as well as by ex vivo and in vivo measurements that impedance plethysmography, applied extravascularly directly on large arteries, is a viable method for monitoring various cardiovascular parameters, such as blood pressure, with high accuracy. The sensor is designed as an implant to monitor cardiac events and arteriosclerotic progression over the long term.

  3. Use of low-frequency electrical impedance measurements to determine phospholipid content in amniotic fluid

    Science.gov (United States)

    DeLuca, F.; Cametti, C.; Zimatore, G.; Maraviglia, B.; Pachi', A.

    1996-09-01

    In this report we propose a new method for an in vitro test of the foetal lung maturity based on the measurement of the electrical conductivity of the overall amniotic fluid obtained from transabdominal amniocentesis, since this quantity can be linked to a first approximation in a very simple way to the phospholipid content. We have carried out measurements of 85 different samples of amniotic fluid as a function of gestation weeks and we have observed a pronounced change of the electrical conductivity that reflects the increase in the phospholipid concentration occurring at the end of normal pregnancies. The method could be further developed to obtain similar information on in vivo experiments by means of bioelectric impedance tomography, taking advantage of the frequency dependence of the tissue electrical impedance.

  4. A Planar Interdigital Sensor for Bio-impedance Measurement: Theoretical analysis, Optimization and Simulation

    Directory of Open Access Journals (Sweden)

    Thanh-Tuan Ngo

    2014-04-01

    Full Text Available This paper proposes the design of a biosensor to characterize the dielectric and conductive properties of biological materials (for example blood or water by impedance spectroscopy. Particularly, its design optimized the geometric structure interdigitated electrodes. This optimization allows extending the frequency range of measurement by reducing the polarization effect. Polarization effect is manifested by an interface capability (or double layer from interaction between ions and molecules in the boundary between the surface of the electrolyte and the electrodes, it increases the measurement error at low frequencies. This paper recommends also a novel method to determine the parameters (relative permittivity, thickness and capacitance per unit area of the double layer (DL at the contact surface of the electrode with the solution. CoventorWare software was utilized to modelize of interdigital sensor structure in three dimensions (3D to verify the analytical results and evaluate the influence of geometrical parameters and the dielectric properties of the medium on bioelectrical impedance.

  5. Optimisation of the Low-Frequency Response of a Multi-stage Bioelectric Amplifier for Electrocardiogram (ECG Recording

    Directory of Open Access Journals (Sweden)

    Burke Martin J.

    2016-01-01

    Full Text Available This paper reports the optimisation of the low-frequency response of a multi-stage bioelectric amplifier intended for use in the measurement of the human electrocardiogram (ECG using high-impedance un-gelled electrodes. The frequency response was optimised to meet international performance requirements for electrocardiographic recorders, in particular the International Electrotechnical Commission 60601 standards [1,2]. The pole and zero locations of a multi-stage amplifier configuration were optimised to meet both time and frequency domain specifications. The optimum assignment for a three stage amplifier, having two differential stages and a differential-to-single-ended conversion stage was established by evaluating the performance of a number of circuit configurations. The optimum configuration was found to be two differential stages with a gain of 20dB each and a differential-to single-ended output stage with unity gain. The -3dB pole is placed at 0.028Hz and a zero at 0.0028Hz in the first and second stages to give an overall -3dB bandwidth of 0.043Hz. In addition, the pole of the input ac coupling network was placed at 0.0028Hz in order to meet the undershoot and recovery slope requirements in the narrow pulse response.

  6. Endogenous bioelectrical networks store non-genetic patterning information during development and regeneration.

    Science.gov (United States)

    Levin, Michael

    2014-06-01

    Pattern formation, as occurs during embryogenesis or regeneration, is the crucial link between genotype and the functions upon which selection operates. Even cancer and aging can be seen as challenges to the continuous physiological processes that orchestrate individual cell activities toward the anatomical needs of an organism. Thus, the origin and maintenance of complex biological shape is a fundamental question for cell, developmental, and evolutionary biology, as well as for biomedicine. It has long been recognized that slow bioelectrical gradients can control cell behaviors and morphogenesis. Here, I review recent molecular data that implicate endogenous spatio-temporal patterns of resting potentials among non-excitable cells as instructive cues in embryogenesis, regeneration, and cancer. Functional data have implicated gradients of resting potential in processes such as limb regeneration, eye induction, craniofacial patterning, and head-tail polarity, as well as in metastatic transformation and tumorigenesis. The genome is tightly linked to bioelectric signaling, via ion channel proteins that shape the gradients, downstream genes whose transcription is regulated by voltage, and transduction machinery that converts changes in bioelectric state to second-messenger cascades. However, the data clearly indicate that bioelectric signaling is an autonomous layer of control not reducible to a biochemical or genetic account of cell state. The real-time dynamics of bioelectric communication among cells are not fully captured by transcriptomic or proteomic analyses, and the necessary-and-sufficient triggers for specific changes in growth and form can be physiological states, while the underlying gene loci are free to diverge. The next steps in this exciting new field include the development of novel conceptual tools for understanding the anatomical semantics encoded in non-neural bioelectrical networks, and of improved biophysical tools for reading and writing

  7. About vectors

    CERN Document Server

    Hoffmann, Banesh

    1975-01-01

    From his unusual beginning in ""Defining a vector"" to his final comments on ""What then is a vector?"" author Banesh Hoffmann has written a book that is provocative and unconventional. In his emphasis on the unresolved issue of defining a vector, Hoffmann mixes pure and applied mathematics without using calculus. The result is a treatment that can serve as a supplement and corrective to textbooks, as well as collateral reading in all courses that deal with vectors. Major topics include vectors and the parallelogram law; algebraic notation and basic ideas; vector algebra; scalars and scalar p

  8. Vector analysis

    CERN Document Server

    Newell, Homer E

    2006-01-01

    When employed with skill and understanding, vector analysis can be a practical and powerful tool. This text develops the algebra and calculus of vectors in a manner useful to physicists and engineers. Numerous exercises (with answers) not only provide practice in manipulation but also help establish students' physical and geometric intuition in regard to vectors and vector concepts.Part I, the basic portion of the text, consists of a thorough treatment of vector algebra and the vector calculus. Part II presents the illustrative matter, demonstrating applications to kinematics, mechanics, and e

  9. Microbiology and optimization of hydrogen fermentation and bioelectricity production

    Energy Technology Data Exchange (ETDEWEB)

    Makinen, A.

    2013-11-01

    This work investigated dark fermentative hydrogen (H{sub 2}) and bioelectricity production from carbohydrates. Meso- and thermophilic fermentative and mesophilic exoelectrogenic bacteria were enriched from different natural sources. The H{sub 2} production from different hexoses and pentoses, them main constituents of lignocellulose, was studied in batch assays. H{sub 2} production from xylose was examined in continuous stirred tank reactor (CSTR). Operational parameters for H{sub 2} production were optimized. Bioelectricity production was studied in microbial fuel cells and process parameters were optimized. Dynamics of microbial communities in H{sub 2} and bioelectricity production processes were determined. A novel thermophilic dark fermentative H{sub 2} producing bacterium, Thermovorax subterraneus, was enriched and isolated from geothermal underground mine. T. subterraneus had the optimum growth temperature of 72 deg C and the maximum H{sub 2} yield of 1.4 mol/mol glucose in batch assay. The main soluble fermentative end products of T. subterraneus were acetate and ethanol. Thermophilic dark fermentative mixed culture enriched from hot spring (Hisarlan, Turkey) had the maximum H{sub 2} yield of 1.7 mol/mol glucose. The optimal environmental parameters to maximize H{sub 2} yield were temperature 52 deg C, initial pH 6.5, 40 mg/L Fe{sup 2+}, 4.5 g/L yeast extract and glucose concentration of 4 g/L. Increasing the glucose concentration to 18 g/L increased the maximum H{sub 2} production rate to 56.2 mmol H{sub 2}/h/L. Environmental parameters had a significant effect on metabolic pathways of fermentation. Another hot spring (Hisarkoy, Turkey) enrichment culture was able to ferment different sugars to H{sub 2} favoring pentoses over hexoses. The best H{sub 2} yields in batch assays were obtained from pentoses: xylose, arabinose and ribose yielded 21, 15 and 8 % of the theoretical yield, respectively; whilst on glucose the yield was only 2 % of the theoretical

  10. Impedance calculation for ferrite inserts

    Energy Technology Data Exchange (ETDEWEB)

    Breitzmann, S.C.; Lee, S.Y.; /Indiana U.; Ng, K.Y.; /Fermilab

    2005-01-01

    Passive ferrite inserts were used to compensate the space charge impedance in high intensity space charge dominated accelerators. They study the narrowband longitudinal impedance of these ferrite inserts. they find that the shunt impedance and the quality factor for ferrite inserts are inversely proportional to the imaginary part of the permeability of ferrite materials. They also provide a recipe for attaining a truly passive space charge impedance compensation and avoiding narrowband microwave instabilities.

  11. Acoustic ground impedance meter

    Science.gov (United States)

    Zuckerwar, A. J. (Inventor)

    1984-01-01

    A method and apparatus are presented for measuring the acoustic impedance of a surface in which the surface is used to enclose one end of the chamber of a Helmholz resonator. Acoustic waves are generated in the neck of the resonator by a piston driven by a variable speed motor through a cam assembly. The acoustic waves are measured in the chamber and the frequency of the generated acoustic waves is measured by an optical device. These measurements are used to compute the compliance and conductance of the chamber and surface combined. The same procedure is followed with a calibration plate having infinite acoustic impedance enclosing the chamber of the resonator to compute the compliance and conductance of the chamber alone. Then by subtracting, the compliance and conductance for the surface is obtained.

  12. Biogenic metallic nanoparticles as catalyst for bioelectricity production: A novel approach in microbial fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Saravanakumar, Kandasamy, E-mail: saravana732@gmail.com [School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai (China); State Key Laboratory of Microbial Metabolism, Shanghai Jiao Tong University, Shanghai (China); Key Laboratory of Urban Agriculture (South), Ministry of Agriculture, Shanghai (China); MubarakAli, Davoodbasha [Microbial Genetic Engineering Laboratory, Division of Bioengineering, College of Life Science and Bioengineering, Incheon National University, Songdo 406772, Incheon (Korea, Republic of); Department of Microbiology, School of Lifesciences, Bharathidasan University, Tiruchirappalli 620024 (India); Kathiresan, Kandasamy [Centre of Advanced Study in Marine Biology, Faculty of Marine Sciences, Annamalai University, Parangipettai 608 502, Tamil Nadu (India); Thajuddin, Nooruddin [Department of Microbiology, School of Lifesciences, Bharathidasan University, Tiruchirappalli 620024 (India); Department of Botany and Microbiology, College of Science, King Saud University, Riyadh 11451 (Saudi Arabia); Alharbi, Naiyf S. [Department of Botany and Microbiology, College of Science, King Saud University, Riyadh 11451 (Saudi Arabia); Chen, Jie, E-mail: jiechen59@sjtu.edu.cn [School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai (China); State Key Laboratory of Microbial Metabolism, Shanghai Jiao Tong University, Shanghai (China); Key Laboratory of Urban Agriculture (South), Ministry of Agriculture, Shanghai (China)

    2016-01-15

    Highlights: • Trichoderma sp., showed an abilities to synthesis of AgNPs and AuNPs with an excellent stability. • AuNPs significantly enhanced the bioelectricity production by MFC of anaerobic fermentation as catalyst. • Maximum bioelectricity production was optimized and obtained the voltage of 432.80 mA using RSM. - Abstract: The present work aimed to use the biogenic metallic nanoparticles as catalyst for bioelectricity production in microbial fuel cell (MFC) approach under anaerobic condition. Silver and gold nanoparticles (AuNPs) were synthesized using Trichoderma sp. Particle size and cystallinity were measured by X-ray diffraction revealed the crystalline structure with average size of 36.17 nm. Electron microscopic studies showed spherical shaped silver nanoparticles (AgNPs) and cubical shaped AuNPs with size ranges from 50 to 150 nm. The concentration of biogenic metallic nanoparticles as catalyst for enhanced bioelectricity generations and estimated by response surface methodology (RSM) and found at the greatest of 342.80 mA under optimized conditions are time interval, temperature, nanoparticles used as 63 h, 28 ± 2.0 °C, 22.54 mg l{sup −1} (AgNPs) and 25.62 mg l{sup −1} (AuNPs) in a batch reactor. AuNPs acted as an excellent catalyst to enhance the bioelectricity production. This novel technique could be used for eco-friendly, economically feasible and facile electricity production.

  13. Tensor Impedance Surfaces

    Science.gov (United States)

    2010-11-30

    ELECTROMAGNEETIC SURFACE IMPEDANCE PROPERTIES FA9550-09-C-0198 DR. ADOUR KABAKIAN HUGHES RESEARCH LABS AFOSR / RSE 875 North Randolph Street, Suit...325 Room 3112 Arlington, Virginia 22203-1768 AFOSR / RSE AFRL-OSR-VA-TR-2012-0770 Distribution A We have investigated and determined how the tensor...the case of a TM wave, which favors propagation along the shorter principal axis. Standard terms apply U U U UU Arje Nachman RSE (Program Manager

  14. Impeded Dark Matter

    OpenAIRE

    Kopp, Joachim; Liu, Jia; Slatyer, Tracy R.; Wang, Xiao-Ping; Xue, Wei

    2016-01-01

    We consider a new class of thermal dark matter models, dubbed "Impeded Dark Matter", in which the mass splitting between the dark matter particles and their annihilation products is tiny. Compared to the previously proposed Forbidden Dark Matter scenario, the mass splittings we consider are much smaller, and are allowed to be either positive or negative. We demonstrate that either case can be easily realized without requiring tuning of model parameters. For negative mass splitting, we demonst...

  15. Acoustic impedances of ear canals measured by impedance tube

    DEFF Research Database (Denmark)

    Ciric, Dejan; Hammershøi, Dorte

    2007-01-01

    During hearing sensitivity tests, the sound field is commonly generated by an earphone placed on a subject ear. One of the factors that can affect the sound transmission in the ear is the acoustic impedance of the ear canal. Its importance is related to the contribution of other elements involved...... in the transmission such as the earphone impedance. In order to determine the acoustic impedances of human ear canals, the standardized method for measurement of complex impedances used for the measurement of the audiometric earphone impedances is applied. It is based on the transfer function between two microphone...... locations in an impedance tube. The end of the tube representing the measurement plane is placed at the ear canal entrance. Thus, the impedance seen from the entrance inward is measured on 25 subjects. Most subjects participated in the previous measurement of the ratio between the pressures at the open...

  16. Evaluation of bioelectrical impedance analysis for identifying overweight individuals at increased cardiometabolic risk: a cross-sectional study

    National Research Council Canada - National Science Library

    Lamb, Maxine J E; Byrne, Christopher D; Wilson, James F; Wild, Sarah H

    2014-01-01

    ... characteristic curves. Odds ratios for increased cardiometabolic risk in body mass index categories associated with values above compared to below sex-specific percentage body fat thresholds with optimal diagnostic...

  17. Interference of heart and transcutaneous oxygen monitoring in the measurement of bioelectrical impedance analysis in preterm newborns

    Directory of Open Access Journals (Sweden)

    Viviane C. Comym

    Full Text Available Abstract Objective: To verify if the connection of electrodes for heart and transcutaneous oxygen monitoring interfere with the measurement of electrical bioimpedance in preterm newborns. Methods: This was a prospective, blinded, controlled, cross-sectional, crossover study that assessed and compared paired measures of resistance (R and reactance (Xc by BIA, obtained with and without monitoring wires attached to the preterm newborn. The measurements were performed in immediate sequence, after randomization to the presence or absence of electrodes. The sample size calculated was 114 measurements or tests with monitoring wires and 114 without monitoring wires, considering for a difference between the averages of 0.1 ohms, with an alpha error of 10% and beta error of 20%, with significance <0.05. Results: No differences were observed between the R (677.37 ± 196.07 vs. 677.46 ± 194.86 and Xc (31.15 ± 9.36 vs. 31.01 ± 9.56 values obtained with and without monitoring wires, respectively, with good correlation between them (R: 0.997 and Xc: 0.968. Conclusion: The presence of heart and/or transcutaneous oxygen monitoring wires connected to the preterm newborn did not affect the values of R or Xc measured by BIA, allowing them to be carried out in this population without risks.

  18. DXA, bioelectrical impedance, ultrasonography and biometry for the estimation of fat and lean mass in cats during weight loss

    Directory of Open Access Journals (Sweden)

    Borges Naida C

    2012-07-01

    Full Text Available Abstract Background Few equations have been developed in veterinary medicine compared to human medicine to predict body composition. The present study was done to evaluate the influence of weight loss on biometry (BIO, bioimpedance analysis (BIA and ultrasonography (US in cats, proposing equations to estimate fat (FM and lean (LM body mass, as compared to dual energy x-ray absorptiometry (DXA as the referenced method. For this were used 16 gonadectomized obese cats (8 males and 8 females in a weight loss program. DXA, BIO, BIA and US were performed in the obese state (T0; obese animals, after 10% of weight loss (T1 and after 20% of weight loss (T2. Stepwise regression was used to analyze the relationship between the dependent variables (FM, LM determined by DXA and the independent variables obtained by BIO, BIA and US. The better models chosen were evaluated by a simple regression analysis and means predicted vs. determined by DXA were compared to verify the accuracy of the equations. Results The independent variables determined by BIO, BIA and US that best correlated (p r2, 19 equations were selected (12 for FM, 7 for LM; however, only 7 equations accurately predicted FM and one LM of cats. Conclusions The equations with two variables are better to use because they are effective and will be an alternative method to estimate body composition in the clinical routine. For estimated lean mass the equations using body weight associated with biometrics measures can be proposed. For estimated fat mass the equations using body weight associated with bioimpedance analysis can be proposed.

  19. Prediction of fat-free body mass from bioelectrical impedance and anthropometry among 3-year-old children using DXA

    DEFF Research Database (Denmark)

    Ejlerskov, Katrine Tschentscher; Jensen, Signe Marie; Christensen, Line B

    2014-01-01

    -validation approach. Prediction error of FFM was 3.0% for both equations (root mean square error: 360 and 356 g, respectively). The derived equations produced BIA-based prediction of FFM and FM near DXA scan results. We suggest that the predictive equations can be applied in similar population samples aged 2-4 years...

  20. [Effect of refeeding on the body composition of females with restrictive anorexia nervosa; anthropometry versus bioelectrical impedance].

    Science.gov (United States)

    de Mateo Silleras, Beatriz; Redondo del Río, Paz; Camina Martín, Alicia; Soto Célix, María; Alonso Torre, Sara R; Miján de la Torre, Alberto

    2013-01-01

    Objetivo: Evaluar la composición corporal en un grupo de pacientes desnutridas con anorexia nerviosa, respecto de controles sanas, antes y después del soporte nutricional, mediante antropometría y bioimpedancia. Métodos: Estudio observacional prospectivo. Se realizó una antropometría completa y un análisis de bioimpedancia a 12 mujeres con anorexia nerviosa restrictiva (24,5 años) al ingreso hospitalario y semanalmente durante la realimentación. El grupo control estuvo formado por 24 mujeres sanas (21 años). Se aplicaron los test t-Student, U-Mann-Whitney, t-Student para medidas repetidas o Wilcoxon. La concordancia entre antropometría y BIA se analizó mediante el coeficiente de correlación intraclase y Bland-Altman. Resultados: Las pacientes mejoraron significativamente todos los índices de composición corporal a lo largo de la estancia hospitalaria, aunque sus valores al alta siguieron siendo menores que los de las controles. La media de peso ganado fue 5,22 kg (DE: 1,42), de los que el 51,4% fueron masa grasa, con distribución central preferentemente. En las controles la ecuación de BIA que mejor concuerda con antropometría es la de Sun (CCI = 0,896); en las pacientes la concordancia fue más débil, al ingreso y al alta. Conclusiones: La realimentación produce una ganancia ponderal, fundamentalmente a expensas de masa grasa, con distribución central; no se consigue restablecer el estado nutricional. La concordancia entre antropometría y bioimpedancia para el estudio de la composición corporal es aceptable, especialmente en sujetos sanos. Se recomienda emplear antropometría, si no se dispone de BIA vectorial o algún método gold estandard para el análisis de la composición corporal, en casos de alteraciones importantes en la composición corporal y/o el balance hídrico.

  1. The novel application of artificial neural network on bioelectrical impedance analysis to assess the body composition in elderly

    National Research Council Canada - National Science Library

    Hsieh, Kuen-Chang; Chen, Yu-Jen; Lu, Hsueh-Kuan; Lee, Ling-Chun; Huang, Yong-Cheng; Chen, Yu-Yawn

    2013-01-01

    ...) of the elderly by using non-linear Back Propagation Artificial Neural Network (BP-ANN) model and to compare the predictive accuracy with the linear regression model by using energy dual X-ray absorptiometry (DXA...

  2. Observations involving broadband impedance modelling

    Energy Technology Data Exchange (ETDEWEB)

    Berg, J.S. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)

    1996-08-01

    Results for single- and multi-bunch instabilities can be significantly affected by the precise model that is used for the broadband impedance. This paper discusses three aspects of broadband impedance modelling. The first is an observation of the effect that a seemingly minor change in an impedance model has on the single-bunch mode coupling threshold. The second is a successful attempt to construct a model for the high-frequency tails of an r.f. cavity. The last is a discussion of requirements for the mathematical form of an impedance which follow from the general properties of impedances. (author)

  3. Advantages of Nanosensors in the Development of Interfaces for Bioelectric Prostheses

    Directory of Open Access Journals (Sweden)

    Avdeeva Diana

    2016-01-01

    Full Text Available The present research aims to explore the bioelectric activity of muscles using a high-resolution electromyograph and to analyze the prospects of the electromyograph to develop bioelectric patterns for the prosthesis control method based on the data recognition system. The activity of the healthy forearm muscles was investigated during the cyclic activity of fingers in different modes. In addition, the impact of filters on the quality and informativity of myoelectric signals, as well as on the development of bioelectric activity patterns was analyzed. The virtually developed bandpass filters were utilized as experimental filters. The filter impact analysis included the comparison of the signal recorded in the frequency band from 0 to 10000 Hz with the signal filtered in the frequency band from 20 to 500 Hz. The research revealed the advantages of a high-resolution electromyogram for the pattern recognition-based myocontrol.

  4. Elementary vectors

    CERN Document Server

    Wolstenholme, E Œ

    1978-01-01

    Elementary Vectors, Third Edition serves as an introductory course in vector analysis and is intended to present the theoretical and application aspects of vectors. The book covers topics that rigorously explain and provide definitions, principles, equations, and methods in vector analysis. Applications of vector methods to simple kinematical and dynamical problems; central forces and orbits; and solutions to geometrical problems are discussed as well. This edition of the text also provides an appendix, intended for students, which the author hopes to bridge the gap between theory and appl

  5. Modified Blumlein pulse-forming networks for bioelectrical applications.

    Science.gov (United States)

    Romeo, Stefania; Sarti, Maurizio; Scarfì, Maria Rosaria; Zeni, Luigi

    2010-07-01

    Intense nanosecond pulsed electric fields (nsPEFs) have been shown to induce, on intracellular structures, interesting effects dependent on electrical exposure conditions (pulse length and amplitude, repetition frequency and number of pulses), which are known in the literature as "bioelectrical effects" (Schoenbach et al., IEEE Trans Plasma Sci 30:293-300, 2002). In particular, pulses with a shorter width than the plasma membrane charging time constant (about 100 ns for mammalian cells) can penetrate the cell and trigger effects such as permeabilization of intracellular membranes, release of Ca(2+) and apoptosis induction. Moreover, the observed effects have led to exploration of medical applications, like the treatment of melanoma tumors (Nuccitelli et al., Biochem Biophys Res Commun 343:351-360, 2006). Pulsed electric fields allowing such effects usually range from several tens to a few hundred nanoseconds in duration and from a few to several tens of megavolts per meter in amplitude (Schoenbach et al., IEEE Trans Diel Elec Insul 14:1088-1109, 2007); however, the biological effects of subnanosecond pulses have been also investigated (Schoenbach et al., IEEE Trans Plasma Sci 36:414-422, 2008). The use of such a large variety of pulse parameters suggests that highly flexible pulse-generating systems, able to deliver wide ranges of pulse durations and amplitudes, are strongly required in order to explore effects and applications related to different exposure conditions. The Blumlein pulse-forming network is an often-employed circuit topology for the generation of high-voltage electric pulses with fixed pulse duration. An innovative modification to the Blumlein circuit has been recently devised which allows generation of pulses with variable amplitude, duration and polarity. Two different modified Blumlein pulse-generating systems are presented in this article, the first based on a coaxial cable configuration, matching microscopic slides as a pulse-delivery system

  6. Bio-electricity Generation using Jatropha Oil Seed Cake.

    Science.gov (United States)

    Raheman, Hifjur; Padhee, Debasish

    2016-01-01

    The review of patents reveals that Handling of Jatropha seed cake after extraction of oil is essential as it contains toxic materials which create environmental pollution. The goal of this work is complete utilisation of Jatropha seeds. For this purpose, Jatropha oil was used for producing biodiesel and the byproduct Jatropha seed cake was gasified to obtain producer gas. Both biodiesel and producer gas were used to generate electricity. To achieve this, a system comprising gasifier, briquetting machine, diesel engine and generator was developed. Biodiesel was produced successfully using the method patented for biodiesel production and briquettes of Jatropha seed cake were made using a vertical extruding machine. Producer gas was obtained by gasifying these briquettes in a downdraft gasifier. A diesel engine was then run in dual fuel mode with biodiesel and producer gas instead of only diesel. Electricity was generated by coupling it to a generator. The cost of producing kilowatthour of electricity with biodiesel and diesel in dual fuel mode with producer gas was found to be 0.84 $ and 0.75 $, respectively as compared to 0.69 $ and 0.5 $ for the same fuels in single fuel mode resulting in up to 48 % saving of pilot fuel. Compared to singlefuel mode, there was 25-32 % reduction in system and brake thermal efficiency along with significantly lower NOx, higher CO and CO2 emissions when the bio-electricity generating system was operated in dual fuel mode. Overall, the developed system could produce electricity successfully by completely uti- lising Jatropha seeds without leaving any seed cake to cause environmental pollution.

  7. Impedance group summary

    Science.gov (United States)

    Blaskiewicz, M.; Dooling, J.; Dyachkov, M.; Fedotov, A.; Gluckstern, R.; Hahn, H.; Huang, H.; Kurennoy, S.; Linnecar, T.; Shaposhnikova, E.; Stupakov, G.; Toyama, T.; Wang, J. G.; Weng, W. T.; Zhang, S. Y.; Zotter, B.

    1999-12-01

    The impedance working group was charged to reply to the following 8 questions relevant to the design of high-intensity proton machines such as the SNS or the FNAL driver. These questions were first discussed one by one in the whole group, then each ne of them assigned to one member to summarize. On the lst morning these contributions were publicly read, re-discussed and re-written where required—hence they are not the opinion of a particular person, but rather the averaged opinion of all members of the working group. (AIP)

  8. Outdoor ground impedance models.

    Science.gov (United States)

    Attenborough, Keith; Bashir, Imran; Taherzadeh, Shahram

    2011-05-01

    Many models for the acoustical properties of rigid-porous media require knowledge of parameter values that are not available for outdoor ground surfaces. The relationship used between tortuosity and porosity for stacked spheres results in five characteristic impedance models that require not more than two adjustable parameters. These models and hard-backed-layer versions are considered further through numerical fitting of 42 short range level difference spectra measured over various ground surfaces. For all but eight sites, slit-pore, phenomenological and variable porosity models yield lower fitting errors than those given by the widely used one-parameter semi-empirical model. Data for 12 of 26 grassland sites and for three beech wood sites are fitted better by hard-backed-layer models. Parameter values obtained by fitting slit-pore and phenomenological models to data for relatively low flow resistivity grounds, such as forest floors, porous asphalt, and gravel, are consistent with values that have been obtained non-acoustically. Three impedance models yield reasonable fits to a narrow band excess attenuation spectrum measured at short range over railway ballast but, if extended reaction is taken into account, the hard-backed-layer version of the slit-pore model gives the most reasonable parameter values.

  9. Extensions to a manifold learning framework for time-series analysis on dynamic manifolds in bioelectric signals

    Science.gov (United States)

    Erem, Burak; Martinez Orellana, Ramon; Hyde, Damon E.; Peters, Jurriaan M.; Duffy, Frank H.; Stovicek, Petr; Warfield, Simon K.; MacLeod, Rob S.; Tadmor, Gilead; Brooks, Dana H.

    2016-04-01

    This paper addresses the challenge of extracting meaningful information from measured bioelectric signals generated by complex, large scale physiological systems such as the brain or the heart. We focus on a combination of the well-known Laplacian eigenmaps machine learning approach with dynamical systems ideas to analyze emergent dynamic behaviors. The method reconstructs the abstract dynamical system phase-space geometry of the embedded measurements and tracks changes in physiological conditions or activities through changes in that geometry. It is geared to extract information from the joint behavior of time traces obtained from large sensor arrays, such as those used in multiple-electrode ECG and EEG, and explore the geometrical structure of the low dimensional embedding of moving time windows of those joint snapshots. Our main contribution is a method for mapping vectors from the phase space to the data domain. We present cases to evaluate the methods, including a synthetic example using the chaotic Lorenz system, several sets of cardiac measurements from both canine and human hearts, and measurements from a human brain.

  10. A Unified Impedance Model of Grid-Connected Voltage-Source Converters

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Harnefors, Lennart; Blaabjerg, Frede

    2017-01-01

    This paper proposes a unified impedance model of grid-connected voltage-source converters for analyzing dynamic influences of the Phase-Locked Loop (PLL) and current control. The mathematical relations between the impedance models in the different domains are first explicitly revealed by means...... of complex transfer functions and complex space vectors. A stationary (αβ-) frame impedance model is then proposed, which not only predicts the stability impact of the PLL, but reveals also its frequency coupling effect explicitly. Furthermore, the impedance shaping effect of the PLL on the current control...

  11. A-Source Impedance Network

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Blaabjerg, Frede; Galigekere, Veda Prakash;

    2016-01-01

    A novel A-source impedance network is proposed in this letter. The A-source impedance network uses an autotransformer for realizing converters for any application that demand a very high dc voltage gain. The network utilizes a minimal turns ratio compared to other Magnetically Coupled Impedance S...... with an example single-switch 400 W dc-dc converter. For the closed-loop control design and stability assessment, a small signal model and its analysis of the proposed network are also presented in brief.......A novel A-source impedance network is proposed in this letter. The A-source impedance network uses an autotransformer for realizing converters for any application that demand a very high dc voltage gain. The network utilizes a minimal turns ratio compared to other Magnetically Coupled Impedance...

  12. Vector analysis

    CERN Document Server

    Brand, Louis

    2006-01-01

    The use of vectors not only simplifies treatments of differential geometry, mechanics, hydrodynamics, and electrodynamics, but also makes mathematical and physical concepts more tangible and easy to grasp. This text for undergraduates was designed as a short introductory course to give students the tools of vector algebra and calculus, as well as a brief glimpse into these subjects' manifold applications. The applications are developed to the extent that the uses of the potential function, both scalar and vector, are fully illustrated. Moreover, the basic postulates of vector analysis are brou

  13. Optically stimulated differential impedance spectroscopy

    Science.gov (United States)

    Maxey, Lonnie C; Parks, II, James E; Lewis, Sr., Samuel A; Partridge, Jr., William P

    2014-02-18

    Methods and apparatuses for evaluating a material are described. Embodiments typically involve use of an impedance measurement sensor to measure the impedance of a sample of the material under at least two different states of illumination. The states of illumination may include (a) substantially no optical stimulation, (b) substantial optical stimulation, (c) optical stimulation at a first wavelength of light, (d) optical stimulation at a second wavelength of light, (e) a first level of light intensity, and (f) a second level of light intensity. Typically a difference in impedance between the impedance of the sample at the two states of illumination is measured to determine a characteristic of the material.

  14. IMPEDANCE OF FINITE LENGTH RESISTOR

    Energy Technology Data Exchange (ETDEWEB)

    KRINSKY, S.; PODOBEDOV, B.; GLUCKSTERN, R.L.

    2005-05-15

    We determine the impedance of a cylindrical metal tube (resistor) of radius a, length g, and conductivity {sigma}, attached at each end to perfect conductors of semi-infinite length. Our main interest is in the asymptotic behavior of the impedance at high frequency, k >> 1/a. In the equilibrium regime, , the impedance per unit length is accurately described by the well-known result for an infinite length tube with conductivity {sigma}. In the transient regime, ka{sup 2} >> g, we derive analytic expressions for the impedance and wakefield.

  15. [Principles of design of neural-network analog-to-digital converters of bioelectric signals].

    Science.gov (United States)

    Loktiukhin, V N; Chelebaev, S V

    2007-01-01

    A design principle and a procedure for synthesis of neural-network analog-to-digital converters of bioelectric signals are suggested. An example of implementation of an FPGA-based neural-network converter for classification of bioparameters is presented.

  16. Regulation of cell behavior and tissue patterning by bioelectrical signals: challenges and opportunities for biomedical engineering.

    Science.gov (United States)

    Levin, Michael; Stevenson, Claire G

    2012-01-01

    Achieving control over cell behavior and pattern formation requires molecular-level understanding of regulatory mechanisms. Alongside transcriptional networks and biochemical gradients, there functions an important system of cellular communication and control: transmembrane voltage gradients (V(mem)). Bioelectrical signals encoded in spatiotemporal changes of V(mem) control cell proliferation, migration, and differentiation. Moreover, endogenous bioelectrical gradients serve as instructive cues mediating anatomical polarity and other organ-level aspects of morphogenesis. In the past decade, significant advances in molecular physiology have enabled the development of new genetic and biophysical tools for the investigation and functional manipulation of bioelectric cues. Recent data implicate V(mem) as a crucial epigenetic regulator of patterning events in embryogenesis, regeneration, and cancer. We review new conceptual and methodological developments in this fascinating field. Bioelectricity offers a novel way of quantitatively understanding regulation of growth and form in vivo, and it reveals tractable, powerful control points that will enable truly transformative applications in bioengineering, regenerative medicine, and synthetic biology.

  17. The Evaluation of Bioelectrical Activity of Pelvic Floor Muscles Depending on Probe Location: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Tomasz Halski

    2013-01-01

    Full Text Available Objectives. The main objective was to determine how the depth of probe placement affects functional and resting bioelectrical activity of the PFM and whether the recorded signal might be dependent on the direction in which the probe is rotated. Participants. The study comprised of healthy, nulliparous women between the ages of 21 and 25. Outcome Measures. Bioelectric activity of the PFM was recorded from four locations of the vagina by surface EMG and vaginal probe. Results. There were no statistically significant differences between the results during functional sEMG activity. During resting sEMG activity, the highest bioelectrical activity of the PFM was observed in the L1 and the lowest in the L4 and a statistically significant difference between the highest and the lowest results of resting sEMG activity was observed (P=0.0043. Conclusion. Different electrodes placement during functional contraction of PFM does not affect the obtained results in sEMG evaluation. In order to diagnose the highest resting activity of PFM the recording plates should be placed toward the anterior vaginal wall and distally from the introitus. However, all of the PFM have similar bioelectrical activity and it seems that these muscles could be treated as a single muscle.

  18. Bioelectricity from kitchen and bamboo waste in a microbial fuel cell.

    Science.gov (United States)

    Moqsud, M Azizul; Omine, Kiyoshi; Yasufuku, Noriyuki; Bushra, Quazi S; Hyodo, Masayuki; Nakata, Yukio

    2014-02-01

    This study evaluated bioelectricity generation by using kitchen garbage (KG) and bamboo waste (BW) as a solid waste management option by a microbial fuel cell (MFC) method. The nutrient content [nitrogen, phosphorus and potassium (NPK)] of the by-products of bioelectricity were also analyzed and assessed for their potential use as a soil amendment. A one-chamber MFC was used for bioelectricity generation in laboratory experiments using both KG and BW. A data-logger recorded voltage every 20 mins at a constant room temperature of 25°C over 45 days. The trend of voltage generation was different for the two organic wastes. In the case of KG, the voltage at the initial stage (0-5 days) increased rapidly and then gradually to a peak of 620 mV. In contrast, the voltage increased gradually to a peak of 540 mV in the case of BW. The by-products of bioelectricity can be used as soil conditioner as its NPK content was in the range of soil conditioner mentioned in other literature. Thus, the MFC has emerged as an efficient and eco-friendly solution for organic waste management, especially in developing and technologically less sophisticated countries, and can provide green and safe electricity from organic waste.

  19. Analyzing Impedance Spectroscopy Results

    Institute of Scientific and Technical Information of China (English)

    Yoed Tsur; Sioma Baltianski

    2006-01-01

    In this contribution we briefly discuss several analysis techniques for impedance spectroscopy experiments. A number of different approaches, which differ even by the definition of the problem, are used in the literature. Some aimed towards finding an equivalent circuit. Others aimed towards finding directly dielectric properties of the material under an assumed model. Others towards finding distribution of relaxation times, either parametric or point-by point. No matter what the approach is, this will always be an ill-posed problem in the sense that there exist a large number of possible solutions that solve the problem (mathematically) equally well. Therefore some a-priori knowledge about the system must be used. In addition, we should remember that the ultimate goal is to get physical insight about the system.

  20. A Unified Impedance Model of Voltage-Source Converters with Phase-Locked Loop Effect

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Harnefors, Lennart; Blaabjerg, Frede

    2016-01-01

    This paper proposes a unified impedance model for analyzing the effect of Phase-Locked Loop (PLL) on the stability of grid-connected voltage-source converters. In the approach, the dq-frame impedance model is transformed into the stationary αβ-frame by means of complex transfer functions and comp......This paper proposes a unified impedance model for analyzing the effect of Phase-Locked Loop (PLL) on the stability of grid-connected voltage-source converters. In the approach, the dq-frame impedance model is transformed into the stationary αβ-frame by means of complex transfer functions...... and complex space vectors, which not only predicts the stability impact of the PLL, but reveals also its frequency coupling effect in the phase domain. Thus, the impedance models previously developed in the different domains can be unified. Moreover, the impedance shaping effects of PLL are structurally...

  1. Body fluid volumes measurements by impedance: A review of bioimpedance spectroscopy (BIS) and bioimpedance analysis (BIA) methods.

    Science.gov (United States)

    Jaffrin, Michel Y; Morel, Hélène

    2008-12-01

    This paper reviews various bioimpedance methods permitting to measure non-invasively, extracellular, intracellular and total body water (TBW) and compares BIA methods based on empirical equations of the wrist-ankle resistance or impedance at 50 kHz, height and weight with BIS methods which rely on an electrical model of tissues and resistances measured at zero and infinite frequencies. In order to compare these methods, impedance measurements were made with a multifrequency Xitron 4200 impedance meter on 57 healthy subjects which had undergone simultaneously a Dual X-ray absorptiometry examination (DXA), in order to estimate their TBW from their fat-free-mass. Extracellular (ECW) and TBW volumes were calculated for these subjects using the original BIS method and modifications of Matthie[Matthie JR. Second generation mixture theory equation for estimating intracellular water using bioimpedance spectroscopy. J Appl Physiol 2005;99:780-1], Jaffrin et al. [Jaffrin MY, Fenech M, Moreno MV, Kieffer R. Total body water measurement by a modification of the bioimpédance spectroscopy method. Med Bio Eng Comput 2006;44:873-82], Moissl et al. [Moissl UM, Wabel P, Chamney PW, Bosaeus I, Levin NW, et al. Body fluid volume determination via body composition spectroscopy in health and disease. Physiol Meas 2006;27:921-33] and their TBW resistivities were compared and discussed. ECW volumes were calculated by BIA methods of Sergi et al. [Sergi G, Bussolotto M, Perini P, Calliari I, et al. Accuracy of bioelectrical bioimpedance analysis for the assessment of extracellular space in healthy subjects and in fluid retention states. Ann Nutr Metab 1994;38(3):158-65] and Hannan et al. [Hannan WJ, Cowen SJ, Fearon KC, Plester CE, Falconer JS, Richardson RA. Evaluation of multi-frequency bio-impedance analysis for the assessment of extracellular and total body water in surgical patients. Clin Sci 1994;86:479-85] and TBW volumes by BIA methods of Kushner and Schoeller [Kushner RF

  2. Behaviour of the electrical impedance myography in isometric contraction of biceps brachii at different elbow joint angles

    Science.gov (United States)

    Coutinho, A. B. B.; Jotta, B.; Pino, A. V.; Souza, M. N.

    2012-12-01

    Electrical impedance myography (EIM) can be understood as an experimental technique applied to evaluate bioelectrical impedance associated to the muscular activity. With the development of technique, some studies are trying to associate the EIM parameters with the morphological and physiological changes that occur in the muscle during contraction. In this context this work sought to associate EIM parameters observed during isometric contractions of the biceps brachii muscle at different elbow joint angles with the correspondent muscular force. Differently from previous works that did not observe significant correlation between those data, our findings point to high correlations between the some EIM resistive parameters and the muscle force. Despite the need of further investigation, our results indicated that EIM technique can be used to estimate muscle force in a noninvasive way.

  3. Short-circuit impedance measurement

    DEFF Research Database (Denmark)

    Pedersen, Knud Ole Helgesen; Nielsen, Arne Hejde; Poulsen, Niels Kjølstad

    2003-01-01

    Methods for estimating the short-circuit impedance in the power grid are investigated for various voltage levels and situations. The short-circuit impedance is measured, preferably from naturally occurring load changes in the grid, and it is shown that such a measurement system faces different...

  4. Impedance of Finite Length Resistor

    CERN Document Server

    Krinsky, Samuel; Podobedov, Boris

    2005-01-01

    We determine the impedance of a cylindrical metal tube (resistor) of radius a and length g, attached at each end to perfect conductors of semi-infinite length. Our main interest is in the behavior of the impedance at high frequency (k>>1/a). In the equilibrium regime, ka2

  5. Electrical impedance characterization of normal and cancerous human hepatic tissue.

    Science.gov (United States)

    Laufer, Shlomi; Ivorra, Antoni; Reuter, Victor E; Rubinsky, Boris; Solomon, Stephen B

    2010-07-01

    The four-electrode method was used to measure the ex vivo complex electrical impedance of tissues from 14 hepatic tumors and the surrounding normal liver from six patients. Measurements were done in the frequency range 1-400 kHz. It was found that the conductivity of the tumor tissue was much higher than that of the normal liver tissue in this frequency range (from 0.14 +/- 0.06 S m(-1) versus 0.03 +/- 0.01 S m(-1) at 1 kHz to 0.25 +/- 0.06 S m(-1) versus 0.15 +/- 0.03 S m(-1) at 400 kHz). The Cole-Cole models were estimated from the experimental data and the four parameters (rho(0), rho(infinity), alpha, f(c)) were obtained using a least-squares fit algorithm. The Cole-Cole parameters for the cancerous and normal liver are 9 +/- 4 Omega m(-1), 2.2 +/- 0.7 Omega m(-1), 0.5 +/- 0.2, 140 +/- 103 kHz and 50 +/- 28 Omega m(-1), 3.2 +/- 0.6 Omega m(-1), 0.64 +/- 0.04, 10 +/- 7 kHz, respectively. These data can contribute to developing bioelectric applications for tissue diagnostics and in tissue treatment planning with electrical fields such as radiofrequency tissue ablation, electrochemotherapy and gene therapy with reversible electroporation, nanoscale pulsing and irreversible electroporation.

  6. Impedance source power electronic converters

    CERN Document Server

    Liu, Yushan; Ge, Baoming; Blaabjerg, Frede; Ellabban, Omar; Loh, Poh Chiang

    2016-01-01

    Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of pow...

  7. Cloning vector

    Science.gov (United States)

    Guilfoyle, R.A.; Smith, L.M.

    1994-12-27

    A vector comprising a filamentous phage sequence containing a first copy of filamentous phage gene X and other sequences necessary for the phage to propagate is disclosed. The vector also contains a second copy of filamentous phage gene X downstream from a promoter capable of promoting transcription in a bacterial host. In a preferred form of the present invention, the filamentous phage is M13 and the vector additionally includes a restriction endonuclease site located in such a manner as to substantially inactivate the second gene X when a DNA sequence is inserted into the restriction site. 2 figures.

  8. Cloning vector

    Science.gov (United States)

    Guilfoyle, Richard A.; Smith, Lloyd M.

    1994-01-01

    A vector comprising a filamentous phage sequence containing a first copy of filamentous phage gene X and other sequences necessary for the phage to propagate is disclosed. The vector also contains a second copy of filamentous phage gene X downstream from a promoter capable of promoting transcription in a bacterial host. In a preferred form of the present invention, the filamentous phage is M13 and the vector additionally includes a restriction endonuclease site located in such a manner as to substantially inactivate the second gene X when a DNA sequence is inserted into the restriction site.

  9. Measuring Electrolyte Impedance and Noise Simultaneously by Triangular Waveform Voltage and Principal Component Analysis.

    Science.gov (United States)

    Xu, Shanzhi; Wang, Peng; Dong, Yonggui

    2016-04-22

    In order to measure the impedance variation process in electrolyte solutions, a method of triangular waveform voltage excitation is investigated together with principal component analysis (PCA). Using triangular waveform voltage as the excitation signal, the response current during one duty cycle is sampled to construct a measurement vector. The measurement matrix is then constructed by the measurement vectors obtained from different measurements. After being processed by PCA, the changing information of solution impedance is contained in the loading vectors while the response current and noise information is contained in the score vectors. The measurement results of impedance variation by the proposed signal processing method are independent of the equivalent impedance model. The noise-induced problems encountered during equivalent impedance calculation are therefore avoided, and the real-time variation information of noise in the electrode-electrolyte interface can be extracted at the same time. Planar-interdigitated electrodes are experimentally tested for monitoring the KCl concentration variation process. Experimental results indicate that the measured impedance variation curve reflects the changing process of solution conductivity, and the amplitude distribution of the noise during one duty cycle can be utilized to analyze the contact conditions of the electrode and electrolyte interface.

  10. Measuring Electrolyte Impedance and Noise Simultaneously by Triangular Waveform Voltage and Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Shanzhi Xu

    2016-04-01

    Full Text Available In order to measure the impedance variation process in electrolyte solutions, a method of triangular waveform voltage excitation is investigated together with principal component analysis (PCA. Using triangular waveform voltage as the excitation signal, the response current during one duty cycle is sampled to construct a measurement vector. The measurement matrix is then constructed by the measurement vectors obtained from different measurements. After being processed by PCA, the changing information of solution impedance is contained in the loading vectors while the response current and noise information is contained in the score vectors. The measurement results of impedance variation by the proposed signal processing method are independent of the equivalent impedance model. The noise-induced problems encountered during equivalent impedance calculation are therefore avoided, and the real-time variation information of noise in the electrode-electrolyte interface can be extracted at the same time. Planar-interdigitated electrodes are experimentally tested for monitoring the KCl concentration variation process. Experimental results indicate that the measured impedance variation curve reflects the changing process of solution conductivity, and the amplitude distribution of the noise during one duty cycle can be utilized to analyze the contact conditions of the electrode and electrolyte interface.

  11. Body composition measurement: a review of hydrodensitometry, anthropometry, and impedance methods.

    Science.gov (United States)

    Brodie, D; Moscrip, V; Hutcheon, R

    1998-03-01

    Human body composition is an expression of genetic and nutritional factors. It can change as a consequence of exogenous influences such as training, disease, or diet and is therefore of particular interest to nutrition professionals. Two of the main methods of estimating body composition in this review (hydrodensitometry and anthropometry) have been in use for decades, but the third method (bioelectrical impedance) is more recent. The procedure, theoretical basis, assumptions, standard error of estimates, and comparisons with other techniques are presented for each of the three methods. References to general and specific populations are presented that illustrate regression equations for different ages, ethnic groups, and gender. The advantages and disadvantages of the three methods are reviewed with reference made to the alternative compartment models. Other methods (DEXA, infrared interactance) are briefly reviewed.

  12. Impedance-estimation methods, modeling methods, articles of manufacture, impedance-modeling devices, and estimated-impedance monitoring systems

    Science.gov (United States)

    Richardson, John G.

    2009-11-17

    An impedance estimation method includes measuring three or more impedances of an object having a periphery using three or more probes coupled to the periphery. The three or more impedance measurements are made at a first frequency. Three or more additional impedance measurements of the object are made using the three or more probes. The three or more additional impedance measurements are made at a second frequency different from the first frequency. An impedance of the object at a point within the periphery is estimated based on the impedance measurements and the additional impedance measurements.

  13. Scattering patterns of dihedral corner reflectors with impedance surface impedances

    Science.gov (United States)

    Balanis, Constantine A.; Griesser, Timothy; Liu, Kefeng

    The radar cross section patterns of lossy dihedral corner reflectors are calculated using a uniform geometrical theory of diffraction for impedance surfaces. All terms of up to third order reflections are considered for patterns in the principal plane. The surface waves are included whenever they exist for reactive surface impedances. The dihedral corner reflectors examined have right, obtuse, and acute interior angles, and patterns over the entire 360 deg azimuthal plane are calculated. The surface impedances can be different on the four faces of the dihedral corner reflector; however, the surface impedance must be uniform over each face. Computed cross sections are compared with a moment method technique for a dielectric/ferrite absorber coating on a metallic corner reflector. The analysis of the dihedral corner reflector is important because it demonstrates many of the important scattering contributors of complex targets including both interior and exterior wedge diffraction, half-plane diffraction, and dominant multiple reflections and diffractions.

  14. GB-R impedances: new approach to impedance simulation

    Science.gov (United States)

    Serrano, L.; Carlosena, A.

    1995-04-01

    A new design procedure is presented for obtaining simulated inductors and large capacitors from classical opamp circuits. Such impedances exploit almost all of the available bandwidth of the operational amplifier.

  15. Highly Sensitive Measurement of Bio-Electric Potentials by Boron-Doped Diamond (BDD) Electrodes for Plant Monitoring.

    Science.gov (United States)

    Ochiai, Tsuyoshi; Tago, Shoko; Hayashi, Mio; Fujishima, Akira

    2015-10-23

    We describe a sensitive plant monitoring system by the detection of the bioelectric potentials in plants with boron-doped diamond (BDD) electrodes. For sensor electrodes, we used commercially available BDD, Ag, and Pt plate electrodes. We tested this approach on a hybrid species in the genus Opuntia (potted) and three different trees (ground-planted) at different places in Japan. For the Opuntia, we artificially induced bioelectric potential changes by the surface potential using the fingers. We detected substantial changes in bioelectric potentials through all electrodes during finger touches on the surface of potted Opuntia hybrid plants, although the BDD electrodes were several times more sensitive to bioelectric potential change compared to the other electrodes. Similarly for ground-planted trees, we found that both BDD and Pt electrodes detected bioelectric potential change induced by changing environmental factors (temperature and humidity) for months without replacing/removing/changing electrodes, BDD electrodes were 5-10 times more sensitive in this detection than Pt electrodes. Given these results, we conclude that BDD electrodes on live plant tissue were able to consistently detect bioelectrical potential changes in plants.

  16. HDR reservoir flow impedance and potentials for impedance reduction

    Energy Technology Data Exchange (ETDEWEB)

    DuTeau, R.; Brown, D.

    1993-06-01

    The data from flow tests which employed two different production zones in a well at Fenton Hill indicates the flow impedance of a wellbore zone damaged by rapid depressurization was altered, possibly by pressure spallation, which appears to have mechanically propped the joint apertures of outlet flow paths intersecting the altered wellbore. The rapid depressurization and subsequent flow test data derived from the damaged well has led to the hypothesis that pressure spallation and the resultant mechanical propping of outlet flow paths reduced the outlet flow impedance of the damaged wellbore. Furthermore, transient pressure data shows the largest pressure drop between the injection and production wellheads occurs near the production wellbore, so lowering the outlet impedance by increasing the apertures of outlet flow paths will have the greatest effect on reducing the overall reservoir impedance. Fenton Hill data also reveals that increasing the overall reservoir pressure dilates the apertures of flow paths, which likewise serves to reduce the reservoir impedance. Data suggests that either pressure dilating the wellbore connected joints with high production wellhead pressure, or mechanically propping open the outlet flow paths will increase the near-wellbore permeability. Finally, a new method for calculating and comparing near-wellbore outlet impedances has been developed. Further modeling, experimentation, and engineered reservoir modifications, such as pressure dilation and mechanical propping, hold considerable potential for significantly improving the productivity of HDR reservoirs.

  17. Impedance Source Power Electronic Converters

    DEFF Research Database (Denmark)

    Liu, Yushan; Abu-Rub, Haitham; Ge, Baoming

    Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable...... and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key...... control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well...

  18. Freezing behaviour facilitates bioelectric crypsis in cuttlefish faced with predation risk.

    Science.gov (United States)

    Bedore, Christine N; Kajiura, Stephen M; Johnsen, Sönke

    2015-12-07

    Cephalopods, and in particular the cuttlefish Sepia officinalis, are common models for studies of camouflage and predator avoidance behaviour. Preventing detection by predators is especially important to this group of animals, most of which are soft-bodied, lack physical defences, and are subject to both visually and non-visually mediated detection. Here, we report a novel cryptic mechanism in S. officinalis in which bioelectric cues are reduced via a behavioural freeze response to a predator stimulus. The reduction of bioelectric fields created by the freeze-simulating stimulus resulted in a possible decrease in shark predation risk by reducing detectability. The freeze response may also facilitate other non-visual cryptic mechanisms to lower predation risk from a wide range of predator types. © 2015 The Author(s).

  19. Low-noise two-wired buffer electrodes for bioelectric amplifiers.

    Science.gov (United States)

    Degen, Thomas; Torrent, Simon; Jäckel, Heinz

    2007-07-01

    Active buffer electrodes are known to improve the immunity of bioelectric recordings against power line interferences. A survey of published work reveals that buffer electrodes are almost exclusively designed using operational amplifiers (opamps). In this paper, we discuss the advantage of utilizing a single transistor instead. This allows for a simple electrode, which is small and requires only two wires. In addition, a single transistor adds considerably less noise when compared to an opamp with the same power consumption. We then discuss output resistance and gain as well as their respective effect on the common mode rejection ratio (CMRR). Finally, we demonstrate the use of two-wired buffer electrodes for a bioelectric amplifier.

  20. Enhanced vanadium (V) reduction and bioelectricity generation in microbial fuel cells with biocathode

    Science.gov (United States)

    Qiu, Rui; Zhang, Baogang; Li, Jiaxin; Lv, Qing; Wang, Song; Gu, Qian

    2017-08-01

    Microbial fuel cells (MFCs) represent a promising approach for remediation of toxic vanadium (V) contaminated environment. Herein, enhanced V(V) reduction and bioelectricity generation are realized in MFCs with biocathode. Synergistically electrochemical and microbial reductions result in the nearly complete removals of V(V) within 7 d operation with initial concentration of 200 mg L-1. Maximum power density of 529 ± 12 mW m-2 is obtained. Electrochemical tests reveal that biocathode promotes electron transfers and reduces charge transfer resistance. XPS analysis confirms that V(IV) is the main reduction product, which precipitates naturally under neutral conditions. High-throughput 16S rRNA gene sequencing analysis indicates that the newly appeared Dysgonomonas is responsible for V(V) reduction and Klebsiella contributes mainly to bioelectricity generation in MFCs with biocathode. This study further improves the performance of remediating V(V) contaminated environment based on MFC technology.

  1. IMPEDANCE CHARACTERISTICS OF POLYFURAN FILMS

    Institute of Scientific and Technical Information of China (English)

    Liang Li; Xiao-bo Wan; Gi Xue

    2002-01-01

    Electrochemical impedance spectroscopy (EIS) was first used for the characterization of polyfuran (PFu) films that had been formed electrochemically on an Au electrode. The polyfuran was measured in high oxidation state, intermediate oxidation state and reduction state, respectively. As the oxidation level is increased, the ionic conductivity of PFu/BF4-increases. And impedance studies on PFu show that the anion BF4- appears to be mobile with a high diffusion coefficient of approximately 10-8 cm2 @ s-1.

  2. Brain bioelectrical activity changes in patients with poststroke depression and apathy

    Directory of Open Access Journals (Sweden)

    I. V. Kichuk

    2015-01-01

    Full Text Available Objective: to study the specific features of brain bioelectrical activity in patents with poststroke apathy and depressive disorders.Patients and methods. The investigation enrolled 175 patients (84 men and 91 women with new-onset cerebral stroke at different sites. A total of 107 (61% patients of them were observed to have depressive disorders (n=41 (38% and apathy (n=66 (62% within a year after disease onset. A control group included 68 (39% patients without poststroke affective disorders. The mean age of the study group patients was 66±10 years and that of the control patients was 68±11 years. The severity and magnitude of neurological deficit were evaluated using the U.S. National Institutes of Health Stroke Scale (NIHSS. The patients underwent electroencephalography (EEG, brain computed tomography and magnetic resonance imaging. The investigators used diagnostic and statistical manual of mental disorders (DSM-IV criteria to diagnose depression and the Hamilton depression rating scale (HAM-D and the mini-mental status examination (MMSE to evaluate the mental status. The basic rhythmic power indices in the affected and unaffected hemispheres were calculated, as well as anteroposterior alpha rhythm distribution coefficient and interhemispheric asymmetry coefficient. Results and discussion. The computer EEG analysis was shown to identify the hallmark characteristics of brain bioelectric activity in patients with different types of affective disorders in the acute, early and late recovery periods of stroke. The patients with affective disorders were found to have brain bioelectrical activity changes predominantly in the rapid frequency sub-band on EEG, suggesting midbrain structural dysfunction. In the patients with poststroke depression, depressive disorder scale scores were related to the power of bioelectric activity in the slow and alpha frequency bands manly in the acute stroke period whereas those were correlated with the EEG

  3. Bioinspired Nanosucker Array for Enhancing Bioelectricity Generation in Microbial Fuel Cells.

    Science.gov (United States)

    Wang, Wei; You, Shijie; Gong, Xiaobo; Qi, Dianpeng; Chandran, Bevita K; Bi, Lanpo; Cui, Fuyi; Chen, Xiaodong

    2016-01-13

    A bioinspired active anode with a suction effect is demonstrated for microbial fuel cells by constructing polypyrrole (PPy) nanotubular arrays on carbon textiles. The oxygen in the inner space of the nanosucker can be depleted by micro-organisms with the capability of facul-tative respiration, forming a vacuum, which then activates the electrode to draw the microorganism by suction and thus improve the bioelectricity generation. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. ELF-magnetic field induced effects on the bioelectric activity of single neurone cells

    Science.gov (United States)

    Azanza, Maria J.; del Moral, A.

    1998-01-01

    The membrane bioelectric activity recorded from single neurones is dramatically modified under applied extremely low frequency magnetic fields (ELF-MF) of 50 Hz and 1-15 mT peak intensity. In ≌27% of the neurones studied a firing rhythm is generated for ≌7 mT, which resembles synchronous oscillations activity. The possibility that ELF-MF could generate neuronal networks synchrony firing does exist as an explanatory physical model shows.

  5. Viral vector-based prime-boost immunization regimens : a possible involvement of T-cell competition

    NARCIS (Netherlands)

    de Mare, A.; Lambeck, A. J. A.; Regts, J.; van Dam, G. M.; Nijman, H. W.; Snippe, H.; Wilschut, J.; Daemen, T.

    2008-01-01

    Vaccination with recombinant viral vectors may be impeded by preexisting vector-specific immunity or by vector-specific immunity induced during the priming immunization. It is assumed that virus-neutralizing antibodies represent the principal effector mechanism of vector-specific immunity, while kil

  6. Models of intracellular mechanisms of plant bioelectrical potentials caused by combined stimulation

    Directory of Open Access Journals (Sweden)

    D. V. Chernetchenko

    2014-10-01

    Full Text Available This paper deals with bioelectrical potentials of the plants recorded during different types of stimuli and combined stimulus as well. All registrations were observed on the leaves of the corn. We used different stimuli, such as cold, heat, photo- and electrical stimulation, and certain combination of this stimuli. Hardware and software system for automated recording of bioelectrical potentials has been successfully used in this work. We proposed the universal pattern of bioelectrical potentials’ recording which allowed to detect the response of the biological object to different stimuli and various combinations of these stimuli. This pattern can be used for the deeper understanding of biological mechanisms of electrical potentials’ generation in cells and discovering of processes of accommodation of whole organisms to these stimuli. Integrated system of recording and biometrical processing was used for analysis of corn leaves electrical responses to the thermal stimuli. The dynamics of these potentials was studied, with the quantitative analysis of the potential level stabilization.We calculated the ratio of amplitude of response potentials to the first response amplitude. Mathematical models of the plant cell were used for studying of intracellular mechanisms of biopotentials gereration. As a result of modeling, we revealed that electrical response of the cells was based on selectiveconductivity of cell membrane for Н+ and Ca2+ ions. Therefore, we showed the biophysical relation of plant potentials to underlying intracellular biophysical mechanisms during thermal and combined stimulation.

  7. Enhanced microbial reduction of vanadium (V) in groundwater with bioelectricity from microbial fuel cells

    Science.gov (United States)

    Hao, Liting; Zhang, Baogang; Tian, Caixing; Liu, Ye; Shi, Chunhong; Cheng, Ming; Feng, Chuanping

    2015-08-01

    Bioelectricity generated from the microbial fuel cell (MFC) is applied to the bioelectrical reactor (BER) directly to enhance microbial reduction of vanadium (V) (V(V)) in groundwater. With the maximum power density of 543.4 mW m-2 from the MFC, V(V) removal is accelerated with efficiency of 93.6% during 12 h operation. Higher applied voltage can facilitate this process. V(V) removals decrease with the increase of initial V(V) concentration, while extra addition of chemical oxygen demand (COD) has little effect on performance improvement. Microbial V(V) reduction is enhanced and then suppressed with the increase of conductivity. High-throughput 16S rRNA gene pyrosequencing analysis implies the accumulated Enterobacter and Lactococcus reduce V(V) with products from fermentative microorganisms such as Macellibacteroides. The presentation of electrochemically active bacteria as Enterobacter promotes electron transfers. This study indicates that application of bioelectricity from MFCs is a promising strategy to improve the efficiency of in-situ bioremediation of V(V) polluted groundwater.

  8. [Specifics of perception of acoustic image of intrinsic bioelectric brain activity].

    Science.gov (United States)

    Konstantinov, K V; Leonova, M K; Miroshnikov, D B; Klimenko, V M

    2014-06-01

    We studied the particularities of perception of the acoustic image of intrinsic EEG. We found that the assessment of perception of sounds, the presentation of which was synchronized and was agreed with current bioelectric brain activity, is higher that assessment of perception of acoustic EEG image presented in recorded form. Presentation of recorded acoustic image of EEG is accompanied by increased activity of beta-band in the frontal areas, while real-time presentation of acoustic EEG image is accompanied by the increase of slow wave activity: theta- and delta-bands of occipital areas of the brain. Increase activity in theta- and delta-bands of occipital areas in sessions of hearing the acoustic image of EEG in real time depend on the baseline frequency structure of EEG and correlates with expression of alpha-, beta- and theta-bands of bioelectric brain activity in both frontal and occipital areas. We suppose that presentation of sounds synchronized and agreed with the current bioelectric activity, activated the regulatory brain structures.

  9. Vector geometry

    CERN Document Server

    Robinson, Gilbert de B

    2011-01-01

    This brief undergraduate-level text by a prominent Cambridge-educated mathematician explores the relationship between algebra and geometry. An elementary course in plane geometry is the sole requirement for Gilbert de B. Robinson's text, which is the result of several years of teaching and learning the most effective methods from discussions with students. Topics include lines and planes, determinants and linear equations, matrices, groups and linear transformations, and vectors and vector spaces. Additional subjects range from conics and quadrics to homogeneous coordinates and projective geom

  10. Characteristic Impedance of a Microstrip-Like Interconnect Line in Presence of Ground Plane Aperture

    Directory of Open Access Journals (Sweden)

    Rohit Sharma

    2007-01-01

    Full Text Available We propose new empirical expressions for the characteristic impedance of a microstrip-like interconnect line in presence of ground plane aperture. The existing characteristic impedance expressions are modified so as to include the effect of the ground plane aperture. The variation in the characteristic impedance vis-à-vis the aperture size is established. The proposed expressions are general and valid for a range of dielectric materials concerning MICs, RFICs, and PCBs. The results are validated by measurements performed on a vector network analyzer.

  11. Report of the SSC impedance workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-10-28

    This workshop focused attention on the transverse, single-bunch instability and the detailed analysis of the broadband impedance which would drive it. Issues discussed included: (1) single bunch stability -- impact of impedance frequency shape, coupled-mode vs. fast blowup regimes, possible stopband structure; (2) numerical estimates of transverse impedance of inner bellows and sliding contact shielded bellows; (3) analytic estimates of pickup and kicker impedance contributions; and (4) feasibility studies of wire and beam measurements of component impedance.

  12. Definition of the characteristic impedance

    Institute of Scientific and Technical Information of China (English)

    徐云生; Abbas Sayed OMAR

    1996-01-01

    Currently available definitions of the characteristic impedance are ambiguous andior inaccurate.A general definition,based on the description of discontinuities between adjacent waveguides,is given.This definition is accurate and independent of the structure concerned.So it can be applied to the design of passive components in any type of transmission lines.Using this definition,a given structure can be uniquely characterized,but the absolute value of the characteristic impedance has no sense any more.As an example,the design of a microstrip impedance transformer using this new definition is presented.Numerical results using the mode-matching method prove the accuracy of the theory.

  13. Transverse Impedance of LHC Collimators

    CERN Document Server

    Métral, E; Assmann, Ralph Wolfgang; Boccardi, A; Bracco, C; Bohl, T; Caspers, Friedhelm; Gasior, M; Jones, O R; Kasinski, K; Kroyer, T; Redaelli, S; Robert-Demolaize, R; Roncarolo, F; Rumolo, G; Salvant, B; Steinhagen, R; Weiler, T; Zimmermann, F

    2007-01-01

    The transverse impedance in the LHC is expected to be dominated by the numerous collimators, most of which are made of Fibre-Reinforced-Carbon to withstand the impacts of high intensity proton beams in case of failures, and which will be moved very close to the beam, with full gaps of few millimetres, in order to protect surrounding super-conducting equipments. We present an estimate of the transverse resistive-wall impedance of the LHC collimators, the total impedance in the LHC at injection and top energy, the induced coupled-bunch growth rates and tune shifts, and finally the result of the comparison of the theoretical predictions with measurements performed in 2004 and 2006 on a prototype collimator installed in the SPS.

  14. Impedances of Laminated Vacuum Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Burov, A.; Lebedev, V.; /Fermilab

    2011-06-22

    First publications on impedance of laminated vacuum chambers are related to early 70s: those are of S. C. Snowdon [1] and of A. G. Ruggiero [2]; fifteen years later, a revision paper of R. Gluckstern appeared [3]. All the publications were presented as Fermilab preprints, and there is no surprise in that: the Fermilab Booster has its laminated magnets open to the beam. Being in a reasonable mutual agreement, these publications were all devoted to the longitudinal impedance of round vacuum chambers. The transverse impedance and the flat geometry case were addressed in more recent paper of K. Y. Ng [4]. The latest calculations of A. Macridin et al. [5] revealed some disagreement with Ref. [4]; this fact stimulated us to get our own results on that matter. Longitudinal and transverse impendances are derived for round and flat laminated vacuum chambers. Results of this paper agree with Ref. [5].

  15. Vector velocimeter

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention relates to a compact, reliable and low-cost vector velocimeter for example for determining velocities of particles suspended in a gas or fluid flow, or for determining velocity, displacement, rotation, or vibration of a solid surface, the vector velocimeter comprising a laser...... assembly for emission of a measurement beam for illumination of an object in a measurement volume with coherent light whereby a signal beam emanating from the object in the measurement volume is formed in response to illumination of the object by the measurement beam, a reference beam generator...... detector element signal when the fringe pattern formed by the interfering signal beam and reference beam moves across the first detector array; and a signal processor that is adapted for generation of a velocity signal corresponding to a first velocity component of movement of the object in the measurement...

  16. Vector velocimeter

    DEFF Research Database (Denmark)

    2012-01-01

    for generation of a reference beam, a detector system comprising a first detector arrangement arranged in such a way that the signal beam and the reference beam are incident upon the first detector arrangement with the reference beam propagating at an angle relative to a signal beam, and wherein the first......The present invention relates to a compact, reliable and low-cost vector velocimeter for example for determining velocities of particles suspended in a gas or fluid flow, or for determining velocity, displacement, rotation, or vibration of a solid surface, the vector velocimeter comprising a laser...... assembly for emission of a measurement beam for illumination of an object in a measurement volume with coherent light whereby a signal beam emanating from the object in the measurement volume is formed in response to illumination of the object by the measurement beam, a reference beam generator...

  17. Hybrid-Source Impedance Networks

    DEFF Research Database (Denmark)

    Li, Ding; Gao, Feng; Loh, Poh Chiang;

    2010-01-01

    the cascaded networks would have a higher output voltage gain and other unique advantages that currently have not been investigated yet. It is anticipated that these advantages would help the formed inverters find applications in photovoltaic and other renewable systems, where a high voltage gain is usually......Hybrid-source impedance networks have attracted attention among researchers because of their flexibility in performing buck-boost energy conversion. To date, three distinct types of impedance networks can be summarized for implementing voltage-type inverters with another three types summarized...

  18. Y-Source Impedance Network

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Loh, Poh Chiang; Blaabjerg, Frede;

    2014-01-01

    This letter introduces a new versatile Y-shaped impedance network for realizing converters that demand a very high-voltage gain, while using a small duty ratio. To achieve that, the proposed network uses a tightly coupled transformer with three windings, whose obtained gain is presently not matched...... by existing networks operated at the same duty ratio. The proposed impedance network also has more degrees of freedom for varying its gain, and hence, more design freedom for meeting requirements demanded from it. This capability has been demonstrated by mathematical derivation, and proven in experiment...

  19. Microfabricated Thin Film Impedance Sensor & AC Impedance Measurements

    Directory of Open Access Journals (Sweden)

    Jinsong Yu

    2010-06-01

    Full Text Available Thin film microfabrication technique was employed to fabricate a platinum based parallel-electrode structured impedance sensor. Electrochemical impedance spectroscopy (EIS and equivalent circuit analysis of the small amplitude (±5 mV AC impedance measurements (frequency range: 1 MHz to 0.1 Hz at ambient temperature were carried out. Testing media include 0.001 M, 0.01 M, 0.1 M NaCl and KCl solutions, and alumina (~3 μm and sand (~300 μm particulate layers saturated with NaCl solutions with the thicknesses ranging from 0.6 mm to 8 mm in a testing cell, and the results were used to assess the effect of the thickness of the particulate layer on the conductivity of the testing solution. The calculated resistances were approximately around 20 MΩ, 4 MΩ, and 0.5 MΩ for 0.001 M, 0.01 M, and 0.1 M NaCl solutions, respectively. The presence of the sand particulates increased the impedance dramatically (6 times and 3 times for 0.001 M and 0.1 M NaCl solutions, respectively. A cell constant methodology was also developed to assess the measurement of the bulk conductivity of the electrolyte solution. The cell constant ranged from 1.2 to 0.8 and it decreased with the increase of the solution thickness.

  20. Input impedance characteristics of microstrip structures

    Directory of Open Access Journals (Sweden)

    A. I. Nazarko

    2015-06-01

    Full Text Available Introduction. Electromagnetic crystals (EC and EC-inhomogeneities are one of the main directions of microstrip devices development. In the article the input impedance characteristics of EC- and traditional microstrip inhomogeneities and filter based on EC-inhomogeneities are investigated. Transmission coefficient characteristics. Transmission coefficient characteristics of low impedance EC- and traditional inhomogeneities are considered. Characteristics are calculated in the software package Microwave Studio. It is shown that the efficiency of EC-inhomogeneity is much higher. Input impedance characteristics of low impedance inhomogeneities. Dependences of input impedance active and reactive parts of EC- and traditional inhomogeneities are given. Dependences of the active part illustrate significant low impedance transformation of nominal impedance. The conditions of impedance matching of structure and input medium are set. Input impedance characteristics of high impedance inhomogeneities. Input impedance characteristics of high impedance EC- and traditional inhomogeneities are considered. It was shown that the band of transformation by high impedance inhomogeneities is much narrower than one by low impedance inhomogeneities. Characteristics of the reflection coefficient of inhomogeneities are presented. Input impedance characteristics of narrowband filter. The structure of narrowband filter based on the scheme of Fabry-Perot resonator is presented. The structure of the filter is fulfilled by high impedance EC-inhomogeneities as a reflectors. Experimental and theoretical amplitude-frequency characteristics of the filter are presented. Input impedance characteristics of the filter are shown. Conclusions. Input impedance characteristics of the structure allow to analyse its wave properties, especially resonant. EC-inhomogeneity compared with traditional microstrip provide substantially more significant transformation of the the input impedance.

  1. Acoustic Ground-Impedance Meter

    Science.gov (United States)

    Zuckerwar, A. J.

    1983-01-01

    Helmoltz resonator used in compact, portable meter measures acoustic impedance of ground or other surfaces. Earth's surface is subject of increasing acoustical investigations because of its importance in aircraft noise prediction and measurment. Meter offers several advantages. Is compact and portable and set up at any test site, irrespective of landscape features, weather or other environmental condition.

  2. Small Signal Loudspeaker Impedance Emulator

    DEFF Research Database (Denmark)

    Iversen, Niels Elkjær; Knott, Arnold

    2014-01-01

    Specifying the performance of audio amplifiers is typically done by playing sine waves into a pure ohmic load. However real loudspeaker impedances are not purely ohmic but characterized by the mechanical resonance between the mass of the diaphragm and the compliance of its suspension which vary...

  3. Bioelectricity potential in Mato Grosso do Sul, Brazil; O potencial de bioeletricidade no Mato Grosso do Sul

    Energy Technology Data Exchange (ETDEWEB)

    Turdera, Eduardo Mirko Valenzuela [Universidade Federal da Grande Dourados (UFGD), Dourados, MS (Brazil). Faculdade de Ciencias Exatas e Tecnologicas], E-mail: eduardoturdera@ufgd.edu.br

    2009-07-01

    This paper presents the importance of bioelectricity power from renewable source in the power output of Mato Grosso do Sul (MS). The power energy capacity of MS could grow the next years due arrived of more of the thirty mills on medium term. This scenario will be very favorable because MS State will have conditions to meet power domestic market demand and to have significant surplus of electricity to export. Sugar cane crops are expanding and they could propitiate combined heat power (CHP or cogeneration) technology growth, we make an analysis about the share of the bioelectricity availability in MS power capacity installed. Bioelectricity could be good to MS as well as energy and economic aspects. (author)

  4. Determination of soil moisture distribution from impedance and gravimetric measurements

    Science.gov (United States)

    Ungar, Stephen G.; Layman, Robert; Campbell, Jeffrey E.; Walsh, John; Mckim, Harlan J.

    1992-01-01

    Daily measurements of the soil dielectric properties at 5 and 10 cm were obtained at five locations throughout the First ISLSCP Field Experiment (FIFE) test site during the 1987 intensive field campaigns (IFCs). An automated vector voltmeter was used to monitor the complex electrical impedance, at 10 MHz, of cylindrical volumes of soil delineated by specially designed soil moisture probes buried at these locations. The objective of this exercise was to test the hypothesis that the soil impedance is sensitive to the moisture content of the soil and that the imaginary part (that is, capacitive reactance) can be used to calculate the volumetric water content of the soil. These measurements were compared with gravimetric samples collected at these locations by the FIFE staff science team.

  5. A role for bioelectric effects in the induction of bystander signals by ionizing radiation?

    Science.gov (United States)

    Mothersill, C; Moran, G; McNeill, F; Gow, M D; Denbeigh, J; Prestwich, W; Seymour, C B

    2007-04-03

    The induction of "bystander effects" i.e. effects in cells which have not received an ionizing radiation track, is now accepted but the mechanisms are not completely clear. Bystander effects following high and low LET radiation exposure are accepted but mechanisms are still not understood. There is some evidence for a physical component to the signal. This paper tests the hypothesis that bioelectric or biomagnetic phenomena are involved. Human immortalized skin keratinocytes and primary explants of mouse bladder and fish skin, were exposed directly to ionizing radiation or treated in a variety of bystander protocols. Exposure of cells was conducted by shielding one group of flasks using lead, to reduce the dose below the threshold of 2mGy (60)Cobalt gamma rays established for the bystander effect. The endpoint for the bystander effect in the reporter system used was reduction in cloning efficiency (RCE). The magnitude of the RCE was similar in shielded and unshielded flasks. When cells were placed in a Faraday cage the magnitude of the RCE was less but not eliminated. The results suggest that liquid media or cell-cell contact transmission of bystander factors may be only part of the bystander mechanism. Bioelectric or bio magnetic fields may have a role to play. To test this further, cells were placed in a Magnetic Resonance Imaging (MRI) machine for 10 min using a typical head scan protocol. This treatment also induced a bystander response. Apart from the obvious clinical relevance, the MRI results further suggest that bystander effects may be produced by non-ionizing exposures. It is concluded that bioelectric or magnetic effects may be involved in producing bystander signaling cascades commonly seen following ionizing radiation exposure.

  6. Biohydrogen, biomethane and bioelectricity as crucial components of biorefinery of organic wastes: a review.

    Science.gov (United States)

    Poggi-Varaldo, Héctor M; Munoz-Paez, Karla M; Escamilla-Alvarado, Carlos; Robledo-Narváez, Paula N; Ponce-Noyola, M Teresa; Calva-Calva, Graciano; Ríos-Leal, Elvira; Galíndez-Mayer, Juvencio; Estrada-Vázquez, Carlos; Ortega-Clemente, Alfredo; Rinderknecht-Seijas, Noemí F

    2014-05-01

    Biohydrogen is a sustainable form of energy as it can be produced from organic waste through fermentation processes involving dark fermentation and photofermentation. Very often biohydrogen is included as a part of biorefinery approaches, which reclaim organic wastes that are abundant sources of renewable and low cost substrate that can be efficiently fermented by microorganisms. The aim of this work was to critically assess selected bioenergy alternatives from organic solid waste, such as biohydrogen and bioelectricity, to evaluate their relative advantages and disadvantages in the context of biorefineries, and finally to indicate the trends for future research and development. Biorefining is the sustainable processing of biomass into a spectrum of marketable products, which means: energy, materials, chemicals, food and feed. Dark fermentation of organic wastes could be the beach-head of complete biorefineries that generate biohydrogen as a first step and could significantly influence the future of solid waste management. Series systems show a better efficiency than one-stage process regarding substrate conversion to hydrogen and bioenergy. The dark fermentation also produces fermented by-products (fatty acids and solvents), so there is an opportunity for further combining with other processes that yield more bioenergy. Photoheterotrophic fermentation is one of them: photosynthetic heterotrophs, such as non-sulfur purple bacteria, can thrive on the simple organic substances produced in dark fermentation and light, to give more H2. Effluents from photoheterotrophic fermentation and digestates can be processed in microbial fuel cells for bioelectricity production and methanogenic digestion for methane generation, thus integrating a diverse block of bioenergies. Several digestates from bioenergies could be used for bioproducts generation, such as cellulolytic enzymes and saccharification processes, leading to ethanol fermentation (another bioenergy), thus completing

  7. Viability of a Bioelectrical Signal Acquisition System Energized by Cellphone with NFC.

    Science.gov (United States)

    Kay, Marcel Seiji; Iaione, Fábio

    2015-01-01

    Currently, smartphones are used in various systems in the medical field due to the presence of various features, notably Near Field Communication (NFC). NFC utilizes communication technology and an energy supply based on electromagnetic induction. One of the most common medical tests is the electrocardiogram (ECG), through which various heart diseases can be diagnosed. The objective of this study is to evaluate the feasibility of providing power to a bioelectrical signal acquisition module using a mobile phone with NFC. After testing it was indicated that it is possible to construct a passive module to acquire ECG signals using NFC mobile phone.

  8. Lenguas bioelectrónicas en el análisis de polifenoles del vino

    OpenAIRE

    Cetó, Xavier; Valle Zafra, Manuel del

    2012-01-01

    El desarrollo y uso de una lengua bioelectrónica para llevar a cabo la discriminación y cuantificación de diferentes polifenoles (catecol, ácido cafeico y catequina) presentes en el vino és el objetivo de esta investigación desarrollada por el Departamento de Química de la UAB. En una primera aplicación, la discriminación de estos tuvo lugar en muestras sintéticas, mientras que en el siguiente paso se trabajó sobre muestras dopadas utilizando el vino como matriz. Esta discriminación puede ser...

  9. [Disturbed brain bioelectric activity in patients with liver encephalopathy and cirrhosis].

    Science.gov (United States)

    Alekseeva, A S; Beloborodova, E I; Rachkovskiĭ, M I; Filippova, L P; Lambrova, E G

    2009-01-01

    Brain bioelectric activity in 52 patients with liver cirrhosis (LC) was measured with respect to the degree of hepatic encephalopathy (HE) from the results of background and reactive EEG using West Haven criteria. As the severity of LC increased, signs of HE on background EEG appeared, index frequency and a-rhythm decreased and its amplitude increased. Reactive EEG was indicative of reduced duration, intensity, and decrement rate of responses to orientational loading (visual, somatosensorial, and auditory evoked potentials). It is concluded that EEG studies permit to predict dynamics of LC clinical course and may be used as an additional diagnostic tool, especially at the preclinical stage of HE.

  10. Electrical Stimulation: A Panacea for Disease?: DARPA Investigates New Bioelectrical Interfaces for a Range of Disorders.

    Science.gov (United States)

    Grifantini, Kristina

    2016-01-01

    It seems simple: send a small electrical current to a major nerve in the body and stimulate hormones and organs to react in the way you want. New efforts by research teams are doing just that, zapping peripheral nerves attached to major organs in the hopes of addressing problems as diverse as inflammatory bowel disease, chronic pain, and posttraumatic stress disorder. Thanks to the continued advance of smaller and more efficient electronics, researchers are finding new ways to develop implantable bioelectrical devices to treat a wide range of ailments.

  11. A Software Tool for the Evaluation of the Behaviour of Bioelectrical Currents

    Directory of Open Access Journals (Sweden)

    Gianluca Fabbri

    2011-06-01

    Full Text Available A software tool has been developed in order to evaluate bioelectrical currents. The tool is able to provide a graphical representation of the behaviour of small currents emitted by characteristic points of the human body and captured through a non invasive probe previously developed. The software implementation combines a variety of graphical techniques to create a powerful system that will enable users to perform an accurate and reliable analysis of the emitted currents and to easily go on to further applications and research. This paper introduces the design and the main characteristics of the tool and shows significant measurement results.

  12. Beam Coupling Impedances of Small Discontinuities

    CERN Document Server

    Kurennoy, S S

    2000-01-01

    A general derivation of the beam coupling impedances produced by small discontinuities on the wall of the vacuum chamber of an accelerator is reviewed. A collection of analytical formulas for the impedances of small obstacles is presented.

  13. Tapping mode microwave impedance microscopy

    KAUST Repository

    Lai, K.

    2009-01-01

    We report tapping mode microwave impedance imaging based on atomic force microscope platforms. The shielded cantilever probe is critical to localize the tip-sample interaction near the tip apex. The modulated tip-sample impedance can be accurately simulated by the finite-element analysis and the result agrees quantitatively to the experimental data on a series of thin-film dielectric samples. The tapping mode microwave imaging is also superior to the contact mode in that the thermal drift in a long time scale is totally eliminated and an absolute measurement on the dielectric properties is possible. We demonstrated tapping images on working nanodevices, and the data are consistent with the transport results. © 2009 American Institute of Physics.

  14. A spatial impedance controller for robotic manipulation

    NARCIS (Netherlands)

    Fasse, Ernest D.; Broenink, Jan F.

    1997-01-01

    Mechanical impedance is the dynamic generalization of stiffness, and determines interactive behavior by definition. Although the argument for explicitly controlling impedance is strong, impedance control has had only a modest impact on robotic manipulator control practice. This is due in part to the

  15. Impedance-matched Marx generators

    Directory of Open Access Journals (Sweden)

    W. A. Stygar

    2017-04-01

    Full Text Available We have conceived a new class of prime-power sources for pulsed-power accelerators: impedance-matched Marx generators (IMGs. The fundamental building block of an IMG is a brick, which consists of two capacitors connected electrically in series with a single switch. An IMG comprises a single stage or several stages distributed axially and connected in series. Each stage is powered by a single brick or several bricks distributed azimuthally within the stage and connected in parallel. The stages of a multistage IMG drive an impedance-matched coaxial transmission line with a conical center conductor. When the stages are triggered sequentially to launch a coherent traveling wave along the coaxial line, the IMG achieves electromagnetic-power amplification by triggered emission of radiation. Hence a multistage IMG is a pulsed-power analogue of a laser. To illustrate the IMG approach to prime power, we have developed conceptual designs of two ten-stage IMGs with LC time constants on the order of 100 ns. One design includes 20 bricks per stage, and delivers a peak electrical power of 1.05 TW to a matched-impedance 1.22-Ω load. The design generates 113 kV per stage and has a maximum energy efficiency of 89%. The other design includes a single brick per stage, delivers 68 GW to a matched-impedance 19-Ω load, generates 113 kV per stage, and has a maximum energy efficiency of 90%. For a given electrical-power-output time history, an IMG is less expensive and slightly more efficient than a linear transformer driver, since an IMG does not use ferromagnetic cores.

  16. Vector nematicons

    CERN Document Server

    Horikis, Theodoros P

    2016-01-01

    Families of soliton pairs, namely vector solitons, are found within the context of a coupled nonlocal nonlinear Schrodinger system of equations, as appropriate for modeling beam propagation in nematic liquid crystals. In the focusing case, bright soliton pairs have been found to exist provided their amplitudes satisfy a specific condition. In our analytical approach, focused on the defocusing regime, we rely on a multiscale expansion methods, which reveals the existence of dark-dark and antidark-antidark solitons, obeying an effective Korteweg-de Vries equation, as well as dark-bright solitons, obeying an effective Mel'nikov system. These pairs are discriminated by the sign of a constant that links all physical parameters of the system to the amplitude of the stable continuous wave solutions, and, much like the focusing case, the solitons' amplitudes are linked leading to mutual guiding.

  17. Note: Characterization and test of a high input impedance RF amplifier for series nanowire detector

    Science.gov (United States)

    Wan, Chao; Pei, Yufeng; Jiang, Zhou; Kang, Lin; Wu, Peiheng

    2016-09-01

    We designed a high input impedance RF amplifier based on Tower Jazz's 0.18 μm SiGe BiCMOS process for series nanowire detector. The characterization of its gain and input impedance with a vector network analyzer is described in detail for its specificity. The actual 15 dB gain should be the measured value subtracts 6 dB, which is easy to be ignored. Its input impedance can be equivalent to 6.7 kΩ ∥ 3.4 pF though fitting the measurement, whose accuracy is verified. The process of measurement provides a good reference to characterize the similar special amplifier with unmatched impedance.

  18. A model explaining synchronization of neuron bioelectric frequency under weak alternating low frequency magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Moral, A. del, E-mail: delmoral@unizar.es [Laboratorio de Magnetismo, Departamento de Física de Materia Condensada and Instituto de Ciencia de Materiales, Universidad de Zaragoza and Consejo Superior de Investigaciones Científicas, 50009 Zaragoza (Spain); Laboratorio de Magnetobiología, Departamento de Anatomía e Histología, Facultad de Medicina, Universidad de Zaragoza, 50009 Zaragoza (Spain); Centro de Tecnología Biomédica, Universidad Politécnica de Madrid, 28223 Madrid (Spain); Azanza, María J., E-mail: mjazanza@unizar.es [Laboratorio de Magnetobiología, Departamento de Anatomía e Histología, Facultad de Medicina, Universidad de Zaragoza, 50009 Zaragoza (Spain); Centro de Tecnología Biomédica, Universidad Politécnica de Madrid, 28223 Madrid (Spain)

    2015-03-01

    A biomagnetic-electrical model is presented that explains rather well the experimentally observed synchronization of the bioelectric potential firing rate (“frequency”), f, of single unit neurons of Helix aspersa mollusc under the application of extremely low frequency (ELF) weak alternating (AC) magnetic fields (MF). The proposed model incorporates to our widely experimentally tested model of superdiamagnetism (SD) and Ca{sup 2+} Coulomb explosion (CE) from lipid (LP) bilayer membrane (SD–CE model), the electrical quadrupolar long range interaction between the bilayer LP membranes of synchronized neuron pairs, not considered before. The quadrupolar interaction is capable of explaining well the observed synchronization. Actual extension of our SD–CE-model shows that the neuron firing frequency field, B, dependence becomes not modified, but the bioelectric frequency is decreased and its spontaneous temperature, T, dependence is modified. A comparison of the model with synchronization experimental results of pair of neurons under weak (B{sub 0}≅0.2–15 mT) AC-MF of frequency f{sub M}=50 Hz is reported. From the deduced size of synchronized LP clusters under B, is suggested the formation of small neuron networks via the membrane lipid correlation. - Highlights: • Neuron pair synchronization under low frequency alternating (AC) magnetic field (MF). • Superdiamagnetism and Ca{sup 2+} Coulomb explosion for AC MF effect in synchronized frequency. • Membrane lipid electrical quadrupolar pair interaction as synchronization mechamism. • Good agreement of model with electrophysiological experiments on mollusc Helix neurons.

  19. Bioelectrical Signals and Ion Channels in the Modeling of Multicellular Patterns and Cancer Biophysics.

    Science.gov (United States)

    Cervera, Javier; Alcaraz, Antonio; Mafe, Salvador

    2016-02-04

    Bioelectrical signals and ion channels are central to spatial patterns in cell ensembles, a problem of fundamental interest in positional information and cancer processes. We propose a model for electrically connected cells based on simple biological concepts: i) the membrane potential of a single cell characterizes its electrical state; ii) the long-range electrical coupling of the multicellular ensemble is realized by a network of gap junction channels between neighboring cells; and iii) the spatial distribution of an external biochemical agent can modify the conductances of the ion channels in a cell membrane and the multicellular electrical state. We focus on electrical effects in small multicellular ensembles, ignoring slow diffusional processes. The spatio-temporal patterns obtained for the local map of cell electric potentials illustrate the normalization of regions with abnormal cell electrical states. The effects of intercellular coupling and blocking of specific channels on the electrical patterns are described. These patterns can regulate the electrically-induced redistribution of charged nanoparticles over small regions of a model tissue. The inclusion of bioelectrical signals provides new insights for the modeling of cancer biophysics because collective multicellular states show electrical coupling mechanisms that are not readily deduced from biochemical descriptions at the individual cell level.

  20. A model explaining synchronization of neuron bioelectric frequency under weak alternating low frequency magnetic field

    Science.gov (United States)

    del Moral, A.; Azanza, María J.

    2015-03-01

    A biomagnetic-electrical model is presented that explains rather well the experimentally observed synchronization of the bioelectric potential firing rate ("frequency"), f, of single unit neurons of Helix aspersa mollusc under the application of extremely low frequency (ELF) weak alternating (AC) magnetic fields (MF). The proposed model incorporates to our widely experimentally tested model of superdiamagnetism (SD) and Ca2+ Coulomb explosion (CE) from lipid (LP) bilayer membrane (SD-CE model), the electrical quadrupolar long range interaction between the bilayer LP membranes of synchronized neuron pairs, not considered before. The quadrupolar interaction is capable of explaining well the observed synchronization. Actual extension of our SD-CE-model shows that the neuron firing frequency field, B, dependence becomes not modified, but the bioelectric frequency is decreased and its spontaneous temperature, T, dependence is modified. A comparison of the model with synchronization experimental results of pair of neurons under weak (B0 ≅0.2-15 mT) AC-MF of frequency fM=50 Hz is reported. From the deduced size of synchronized LP clusters under B, is suggested the formation of small neuron networks via the membrane lipid correlation.

  1. [Effect of dosed diet restriction on physiological remodeling and bioelectric properties of bone].

    Science.gov (United States)

    Levashov, M I; Ianko, R V; Chaka, E G; Safonov, S L

    2014-07-01

    The effect of dosed diet restriction on the physiological remodeling and bioelectric properties of bone tissue was studied in 48 male Wistar rats 3- and 18-months of age. The rate of bone tissue apposition was studied by the dynamic histomorphometry method (intravital tetracycline labeling). Electric potentials on the periosteal surface of the freshly isolated femurs were recorded. The magnitude of dielectric loss factor was determined to assess the quality of bone tissue. The control rats received a standard diet. The experimental rats received a limited diet (60 % of the standard mass) for 28 days. The magnitude and rate of the bone tissue apposition on the endosteal and periosteal surface of the tibia were less by 38.4% and 122.7% respectively in experimental rats after dosed diet restriction. Electric potential in the metaphyseal-epiphyseal growth zones of the femur was 29.7% lower, and the dielectric loss factor increased by 15.8%. The bone tissue apposition rate and the electric potential magnitude were increased 10 days after completion of the dosed diet restriction. The magnitude of the dielectric loss factor decreased after returning to the standard diet. Key words: dosed diet restriction, bone, remodelling, bioelectric properties.

  2. 50 Hz-Sinusoidal magnetic field induced effects on the bioelectric activity of single unit neurone cells

    Science.gov (United States)

    Azanza, María. J.; Calvo, Ana C.; del Moral, A.

    2001-05-01

    Neurones recruiting and synchronized bioelectric activity recorded from Helix aspersa brain ganglia, under exposure to 50 Hz sinusoidal magnetic fields of 1-15 mT intensity, is reported. We show recruiting responses from single neurones and the synchronization of pairs of neurones activity. Experimental evidence and model theoretical explanation for the spreading of synchronization are presented.

  3. A compact broadband nonsynchronous noncommensurate impedance transformer

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Kim, Kseniya; Narenda, Kumar

    2012-01-01

    Nonsynchronous noncommensurate impedance transformers consist of a combination of high‐ and low‐impedance transmission lines. High‐impedance lines have narrow tracks in strip and microstrip technology, which allows for high flexibility and miniaturization of the layout in comparison to the tradit......Nonsynchronous noncommensurate impedance transformers consist of a combination of high‐ and low‐impedance transmission lines. High‐impedance lines have narrow tracks in strip and microstrip technology, which allows for high flexibility and miniaturization of the layout in comparison...... to the traditional tapered line transformers. This flexibility of the broadband nonsynchronous noncommensurate impedance transformers is experimentally demonstrated in this article allowing the length reduction by almost three times. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:1832–1835, 2012; View...

  4. Effective impedance for predicting the existence of surface states

    Science.gov (United States)

    Xiao, Meng; Huang, Xueqin; Fang, Anan; Chan, C. T.

    2016-03-01

    We build an effective impedance for two-dimensional (2D) photonic crystals (PCs) comprising a rectangular lattice of dielectric cylinders with the incident electric field polarized along the axis of the cylinders. In particular, we discuss the feasibility of constructing an effective impedance for the case where the Bloch wave vector is far away from the center of Brillouin zone, where the optical response of the PC is necessarily anisotropic, and hence the effective description becomes inevitably angle dependent. We employ the scattering theory and treat the 2D system as a stack of 1D arrays. We consider only the zero-order interlayer diffraction, and all the higher order diffraction terms of interlayer scattering are ignored. This approximation works well when the higher order diffraction terms are all evanescent waves and the interlayer distance is far enough for them to decay out. Scattering theory enables the calculation of transmission and reflection coefficients of a finite-sized slab, and we extract the effective parameters such as the effective impedance (Ze) and the effective refractive index (ne) using a parameter retrieval method. We note that ne is uniquely defined only in a very limited region of the reciprocal space. (nek0a ≪1 , where k0 is the wave vector inside the vacuum and a is thickness of the slab for retrieval), but Ze is uniquely defined and has a well-defined meaning inside a much larger domain in the reciprocal space. For a lossless system, the effective impedance Ze is purely real for the pass band and purely imaginary in the band gaps. Using the sign of the imaginary part of Ze, we can classify the band gaps into two groups, and this classification explains why there is usually no surface state on the boundary of typical fully gapped PCs composed of a lattice of dielectric cylinders. This effective medium approach also allows us to predict the dispersion of surface states even when the surface wave vectors are well beyond the zone

  5. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba; Christopher J. Ziolkowski

    2004-06-30

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a simple sensor incorporated into the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD equipment. Imaging

  6. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2003-10-01

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a simple sensor incorporated into the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD equipment. Imaging

  7. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2003-04-01

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a thin film sensor conformal with the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is capacitively coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD

  8. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba; Christopher J. Ziolkowski

    2005-01-17

    This project aimed at developing a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GTI. GTI proposed to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or non-metallic objects in the proximity of the HDD head. The system will use a simple sensor incorporated into the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD equipment

  9. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2003-01-30

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a thin film sensor conformal with the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is capacitively coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD

  10. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba; Christopher J. Ziolkowski

    2004-10-29

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or non-metallic objects in the proximity of the HDD head. The system will use a simple sensor incorporated into the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD equipment. Imaging

  11. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2002-08-30

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a thin film sensor conformal with the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is capacitively coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD

  12. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2004-02-01

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a simple sensor incorporated into the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD equipment. Imaging

  13. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2002-11-27

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a thin film sensor conformal with the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is capacitively coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD

  14. DIFFERENTIAL SOIL IMPEDANCE OBSTACLE DETECTION

    Energy Technology Data Exchange (ETDEWEB)

    Maximillian J. Kieba

    2004-05-03

    This project develops a new and unique obstacle detection sensor for horizontal directional drilling (HDD) equipment. The development of this new technology will greatly improve the reliability and safety of natural gas HDD construction practices. This sensor utilizes a differential soil impedance measurement technique that will be sensitive to the presence of plastic and ceramic, as well as metallic obstacles. The use of HDD equipment has risen significantly in the gas industry because HDD provides a much more cost-effective and less disruptive method for gas pipe installation than older, trenching methods. However, there have been isolated strikes of underground utilities by HDD equipment, which may have been avoided if methods were available to detect other underground obstacles when using HDD systems. GTI advisors from the gas industry have ranked the value of solving the obstacle detection problem as the most important research and development project for GTI to pursue using Federal Energy Regulatory Commission (FERC) funds available through its industry partner, GRI. GTI proposes to develop a prototype down-hole sensor system that is simple and compact. The sensor utilizes an impedance measurement technique that is sensitive to the presence of metallic or nonmetallic objects in the proximity of the HDD head. The system will use a simple sensor incorporated into the drill head. The impedance of the soil will be measured with a low frequency signal injected through the drill head itself. A pair of bridge type impedance sensors, mounted orthogonal to one another, is coupled to the soil. Inclusions in the soil will cause changes to the sensor balance distinguishable from homogeneous soil. The sensor will provide range and direction data for obstacles near the HDD head. The goal is to provide a simple, robust system that provides the information required to avoid obstacles. This must be done within the size and ruggedness constraints of the HDD equipment. Imaging

  15. Impedance spectroscopy of food mycotoxins

    Science.gov (United States)

    Bilyy, Oleksandr I.; Yaremyk, Roman Ya.; Kotsyumbas, Ihor Ya.; Kotsyumbas, Halyna I.

    2012-01-01

    A new analytical method of high-selective detection of mycotoxins in food and feed are considered. A method is based on optical registration the changes of conduct of the electric polarized bacterial agents in solution at the action of the external gradient electric fields. Measuring are conducted in integrated electrode-optical cuvette of the special construction, which provides the photometric analysis of forward motion of the objects registration in liquid solution under act of the enclosed electric field and simultaneous registration of kinetics of change of electrical impedance parameters solution and electrode system.

  16. Observations involving broadband impedance modelling

    Energy Technology Data Exchange (ETDEWEB)

    Berg, J.S.

    1995-08-01

    Results for single- and multi-bunch instabilities can be significantly affected by the precise model that is used for the broadband impendance. This paper discusses three aspects of broadband impendance modeling. The first is an observation of the effect that a seemingly minor change in an impedance model has on the single-bunch mode coupling threshold. The second is a successful attempt to construct a model for the high-frequency tails of an r.f cavity. The last is a discussion of requirements for the mathematical form of an impendance which follow from the general properties of impendances.

  17. Spheromak Impedance and Current Amplification

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, T K; Hua, D D; Stallard, B W

    2002-01-31

    It is shown that high current amplification can be achieved only by injecting helicity on the timescale for reconnection, {tau}{sub REC}, which determines the effective impedance of the spheromak. An approximate equation for current amplification is: dI{sub TOR}{sup 2}/dt {approx} I{sup 2}/{tau}{sub REC} - I{sub TOR}{sup 2}/{tau}{sub closed} where I is the gun current, I{sub TOR} is the spheromak toroidal current and {tau}{sub CLOSED} is the ohmic decay time of the spheromak. Achieving high current amplification, I{sub TOR} >> I, requires {tau}{sub REC} <<{tau}{sub CLOSED}. For resistive reconnection, this requires reconnection in a cold zone feeding helicity into a hot zone. Here we propose an impedance model based on these ideas in a form that can be implemented in the Corsica-based helicity transport code. The most important feature of the model is the possibility that {tau}{sub REC} actually increases as the spheromak temperature increases, perhaps accounting for the ''voltage sag'' observed in some experiments, and a tendency toward a constant ratio of field to current, B {proportional_to} I, or I{sub TOR} {approx} I. Program implications are discussed.

  18. [Asymmetry of the bioelectrical activity of the human brain at different levels of consciousness].

    Science.gov (United States)

    Rusalova, M N

    2006-12-01

    Asymmetry of different human EEG indices was studied at different levels of consciousness. Subjects' self-reported changes in the content of consciousness: the intensity and quality of involuntary mental processes served as indicator of the level of consciousness. It was shown that a certain profile of EEG asymmetry corresponded to each the observed level of consciousness. In active state of consciousness, the connections in the high-frequency bands: beta-2 and gamma, were more pronounced in the left hemisphere of the brain. At the same time, transition of the focus of coherent connections to the right hemisphere was characteristic of the state of inhibition of "internal speech". The interhemisphere dynamics of autospectra amplitude and foci of coherent connections supports the notion that the character of interhemisphere asymmetry of the brain bioelectrical activity depends on its functional state.

  19. Microbial fuel cells and microbial electrolysis cells for the production of bioelectricity and biomaterials.

    Science.gov (United States)

    Zhou, Minghua; Yang, Jie; Wang, Hongyu; Jin, Tao; Xu, Dake; Gu, Tingyue

    2013-01-01

    Today's global energy crisis requires a multifaceted solution. Bioenergy is an important part of the solution. The microbial fuel cell (MFC) technology stands out as an attractive potential technology in bioenergy. MFCs can convert energy stored in organic matter directly into bioelectricity. MFCs can also be operated in the electrolysis mode as microbial electrolysis cells to produce bioproducts such as hydrogen and ethanol. Various wastewaters containing low-grade organic carbons that are otherwise unutilized can be used as feed streams for MFCs. Despite major advances in the past decade, further improvements in MFC power output and cost reduction are needed for MFCs to be practical. This paper analysed MFC operating principles using bioenergetics and bioelectrochemistry. Several major issues were explored to improve the MFC performance. An emphasis was placed on the use of catalytic materials for MFC electrodes. Recent advances in the production of various biomaterials using MFCs were also investigated.

  20. Computationally efficient bioelectric field modeling and effects of frequency-dependent tissue capacitance

    Science.gov (United States)

    Tracey, Brian; Williams, Michael

    2011-06-01

    Standard bioelectric field models assume that the tissue is purely resistive and frequency independent, and that capacitance, induction, and propagation effects can be neglected. However, real tissue properties are frequency dependent, and tissue capacitance can be important for problems involving short stimulation pulses. A straightforward interpolation scheme is introduced here that can account for frequency-dependent effects, while reducing runtime over a direct computation by several orders of magnitude. The exact Helmholtz solution is compared to several approximate field solutions and is used to study neural stimulation. Results show that frequency-independent tissue capacitance always acts to attenuate the stimulation pulse, thereby increasing firing thresholds, while the dispersion effects introduced by frequency-dependent capacitance may decrease firing thresholds.

  1. Optimization of enhanced bioelectrical reactor with electricity from microbial fuel cells for groundwater nitrate removal.

    Science.gov (United States)

    Liu, Ye; Zhang, Baogang; Tian, Caixing; Feng, Chuanping; Wang, Zhijun; Cheng, Ming; Hu, Weiwu

    2016-01-01

    Factors influencing the performance of a continual-flow bioelectrical reactor (BER) intensified by microbial fuel cells for groundwater nitrate removal, including nitrate load, carbon source and hydraulic retention time (HRT), were investigated and optimized by response surface methodology (RSM). With the target of maximum nitrate removal and minimum intermediates accumulation, nitrate load (for nitrogen) of 60.70 mg/L, chemical oxygen demand (COD) of 849.55 mg/L and HRT of 3.92 h for the BER were performed. COD was the dominant factor influencing performance of the system. Experimental results indicated the undistorted simulation and reliable optimized values. These demonstrate that RSM is an effective method to evaluate and optimize the nitrate-reducing performance of the present system and can guide mathematical models development to further promote its practical applications.

  2. Electrochemical decolorization of methyl orange powered by bioelectricity from single-chamber microbial fuel cells.

    Science.gov (United States)

    Zhang, Baogang; Wang, Zhijun; Zhou, Xiang; Shi, Chunhong; Guo, Huaming; Feng, Chuanping

    2015-04-01

    Methyl orange (MO), a typical azo dye, is a well-known recalcitrant pollutant in dye wastewater. An aeration electrochemical system with single-chamber microbial fuel cell (MFC) as renewable power sources is proposed for MO decolorization. The enhanced color removal efficiency up to 90.4% within 360 min is observed with voltage across the aeration electrolytic reactor fixed at 700 mV. The results from gas chromatography-mass spectrometry (GC-MS) analysis indicate the destruction of MO, with generation of low molecular weight compounds such as benzene derivatives. Comparison experiments imply the indirect electrochemical oxidation of MO by generated H2O2 is mainly responsible for MO decolorization in present study. This work offers a cost-effective electrochemical method for enhancing electrochemical degradation of dyes with bioelectricity generated from MFCs.

  3. Deciphering characteristics of bicyclic aromatics--mediators for reductive decolorization and bioelectricity generation.

    Science.gov (United States)

    Xu, Bin; Chen, Bor-Yann; Hsueh, Chung-Chuan; Qin, Lian-Jie; Chang, Chang-Tang

    2014-07-01

    This first-attempt study quantitatively assessed electron-mediating characteristics of bicyclic aromatics - 1-amino-2-naphthol, 4-amino-1-naphthol (i.e., decolorized intermediates of azo dyes - orange I and II) for color removal and power generation in MFCs. According to cyclic-voltammetric profiles, the presence of reduction and oxidation peak potentials clearly suggested a crucial role of these intermediates as electron-shuttling mediators. Shake-flask cultures also showed that appropriate accumulation of 1A2N, 4A1N apparently enhanced color-removal efficiencies of bacterial decolorization. This study clearly suggested that suitable supplementation of electrochemically active electron shuttle(s) to dye-bearing MFCs is a promising strategy to stimulate reductive decolorization and bioelectricity generation.

  4. Spontaneous arsenic (III) oxidation with bioelectricity generation in single-chamber microbial fuel cells.

    Science.gov (United States)

    Li, Yunlong; Zhang, Baogang; Cheng, Ming; Li, Yalong; Hao, Liting; Guo, Huaming

    2016-04-05

    Arsenic is one of the most toxic elements commonly found in groundwater. With initial concentration of 200μgL(-1), spontaneous As(III) oxidation is realized completely during 7 days operation in single-chamber microbial fuel cells (MFCs) in the present study, with the maximum power density of 752.6±17mWm(-2). The product is less toxic and mobile As(V), which can be removed from aqueous solution more easily. High-throughput 16S rRNA gene pyrosequencing analysis indicates the existence of arsenic-resistant bacteria as Actinobacteria, Comamonas, Pseudomonas and arsenic-oxidizing bacteria as Enterobacter, with electrochemically active bacteria as Lactococcus, Enterobacter. They interact together and are responsible for As(III) oxidation and bioelectricity generation in MFCs. This study offers a potential attractive method for remediation of arsenic-polluted groundwater.

  5. Simultaneous microbial and electrochemical reductions of vanadium (V) with bioelectricity generation in microbial fuel cells.

    Science.gov (United States)

    Zhang, Baogang; Tian, Caixing; Liu, Ying; Hao, Liting; Liu, Ye; Feng, Chuanping; Liu, Yuqian; Wang, Zhongli

    2015-03-01

    Simultaneous microbial and electrochemical reductions of vanadium (V) with bioelectricity generation were realized in microbial fuel cells (MFCs). With initial V(V) concentrations of 75 mg/l and 150 mg/l in anolyte and catholyte, respectively, stable power output of 419±11 mW/m(2) was achieved. After 12h operation, V(V) concentration in the catholyte decreased to the value similar to that of the initial one in the anolyte, meanwhile it was nearly reduced completely in the anolyte. V(IV) was the main reduction product, which subsequently precipitated, acquiring total vanadium removal efficiencies of 76.8±2.9%. Microbial community analysis revealed the emergence of the new species of Deltaproteobacteria and Bacteroidetes as well as the enhanced Spirochaetes mainly functioned in the anode. This study opens new pathways to successful remediation of vanadium contamination.

  6. Mapping small intestine bioelectrical activity using high-resolution printed-circuit-board electrodes.

    Science.gov (United States)

    Angeli, Timothy R; O'Grady, Gregory; Erickson, Jonathan C; Du, Peng; Paskaranandavadivel, Niranchan; Bissett, Ian P; Cheng, Leo K; Pullan, Andrew J

    2011-01-01

    In this study, novel methods were developed for the in-vivo high-resolution recording and analysis of small intestine bioelectrical activity, using flexible printed-circuit-board (PCB) electrode arrays. Up to 256 simultaneous recordings were made at multiple locations along the porcine small intestine. Data analysis was automated through the application and tuning of the Falling-Edge Variable-Threshold algorithm, achieving 92% sensitivity and a 94% positive-predictive value. Slow wave propagation patterns were visualized through the automated generation of animations and isochronal maps. The methods developed and validated in this study are applicable for use in humans, where future studies will serve to improve the clinical understanding of small intestine motility in health and disease.

  7. Alteration of bioelectrically-controlled processes in the embryo: a teratogenic mechanism for anticonvulsants.

    Science.gov (United States)

    Hernández-Díaz, Sonia; Levin, Michael

    2014-08-01

    Maternal use of anticonvulsants during the first trimester of pregnancy has been associated with an elevated risk of major congenital malformations in the offspring. Whether the increased risk is caused by the specific pharmacological mechanisms of certain anticonvulsants, the underlying epilepsy, or common genetic or environmental risk factors shared by epilepsy and malformations has been controversial. We hypothesize that anticonvulsant therapies during pregnancy that attain more successful inhibition of neurotransmission might lead to both better seizure control in the mother and stronger alteration of bioelectrically-controlled processes in the embryo that result in structural malformations. We propose that development of pharmaceuticals that do not alter cell resting transmembrane voltage levels could result in safer drugs. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Anticonvulsants Teratogenic Mechanism Involves Alteration of Bioelectrically-controlled Processes in the Embryo. A hypothesis

    Science.gov (United States)

    Hernández-Díaz, Sonia; Levin, Michael

    2014-01-01

    Maternal use of anticonvulsants during the first trimester of pregnancy has been associated with an elevated risk of major congenital malformations in the offspring. Whether the increased risk is caused by the specific pharmacological mechanisms of certain anticonvulsants, the underlying epilepsy, or common genetic or environmental risk factors shared by epilepsy and malformations is controversial. We hypothesize that anticonvulsant therapies during pregnancy that attain more successful inhibition of neurotransmission might lead to both better seizure control in the mother and stronger alteration of bioelectrically-controlled processes in the embryo that result in structural malformations. If our theory were correct, development of pharmaceuticals that do not alter cell resting transmembrane voltage levels could result in safer drugs. PMID:24815983

  9. [Electrical and magnetic fields of the elementary bioelectric generator in the bounded anisotropic myocardium].

    Science.gov (United States)

    Titomir, L I; Barinova, N E

    2001-01-01

    Using the equations of electrodynamics of stationary currents, relationships were derived for calculating the characteristics of electric and magnetic fields of an elementary (dipole) bioelectric generator in a heterogeneous medium consisting of two regions namely, an anisotropic conducting region corresponding to the excitable myocardium tissue and an isotropic conducting or dielectric region corresponding to the space outside the myocardium where the measurement is made. The shape of distributions of the electric potential and magnetic induction at the myocardium surface was determined, and the effect of anisotropy on these distributions was estimate. Formulas for the identification of the local excited zone within the myocardium from electric and magnetic measurements outside the excitable tissue or on its surface were obtained.

  10. Multi-motion robots control based on bioelectric signals from single-channel dry electrode.

    Science.gov (United States)

    Shen, Hui-Min; Hu, Liang; Lee, Kok-Meng; Fu, Xin

    2015-02-01

    This article presents a multi-motion control system to help severe disabled people operate an auxiliary appliance using neck-up bioelectric signals measured by a single-channel dry electrode on the forehead. The single-channel dry-electrode multi-motion control system exhibits several practical advantages over its conventional counterparts that use multi-channel wet-electrodes; among the challenges is an effective technique to extract bioelectric features for reliable implementation of multi degrees-of-freedom motion control. Using both time and frequency characteristics of the single-channel dry-electrode measurements, motion commands are derived from multiple feature signals associated with concentration demands and different eye-blink actions for use in a two-level control strategy that has been developed to control predefined multi degrees-of-freedom motion trajectories. Test paradigms were designed to pre-calibrate the users' feature signals to statistically account for individual variances. Experimental trials were then carried out on able-bodied and disabled volunteers to validate the universal applicability of the algorithms. The classification success rates for two different eye-blink feature signals were approximately 95% with an average time of 2.4 s for executing a concentration feature signal. The single-channel dry-electrode-based technique has been validated on a 6-degree-of-freedom robot arm demonstrating its significant potentials to help patients suffering severe motor dysfunctions operate a multi-motion auxiliary appliance in everyday living where the ease of use is a priority.

  11. Pumping slots: impedances and power losses

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. [Maryland Univ., College Park, MD (United States). Dept. of Physics

    1996-08-01

    Contributions of pumping slots to the beam coupling impedances and power losses in a B-factory ring are considered. While their leading contribution is to the inductive impedance, for high-intensity machines with short bunches like e{sup +}e{sup -} B-factories the real part of the impedance and related loss factors are also important. Using an analytical approach we calculate the coupling impedances and loss factors due to slots in a ring with an arbitrary cross section of the vacuum chamber. Effects of the slot tilt on the beam impedance are also considered, and restrictions on the tilt angle are derived from limitations on the impedance increase. The power leakage through the slots is discussed briefly. The results are applied to the KEK B-factory. (author)

  12. Cartesian impedance control of dexterous robot hand

    Institute of Scientific and Technical Information of China (English)

    JIANG Li; LIU Hong; CAI He-gao

    2005-01-01

    Presents a novel compliant motion control for a robot hand using the Cartesian impedance approach based on fingertip force measurements. The fingertip can accurately track desired motion in free space and appear as mechanical impedance in constrained space. In the position based impedance control strategy, any switching mode in contact transition phase is not needed. The impedance parameters can be adjusted in a certain range according to various tasks. In this paper, the analysis of the finger's kinematics and dynamics is given. Experimental results have shown the effectiveness of this control strategy.

  13. Impedance Spectroscopy of Human Blood

    Science.gov (United States)

    Mesa, Francisco; Bernal, José J.; Sosa, Modesto A.; Villagómez, Julio C.; Palomares, Pascual

    2004-09-01

    The blood is one of the corporal fluids more used with analytical purposes. When the blood is extracted, immediately it is affected by agents that act on it, producing transformations in its elements. Among the effects of these transformations the hemolysis phenomenon stands out, which consists of the membrane rupture and possible death of the red blood cells. The main purpose of this investigation was the quantification of this phenomenon. A Solartron SI-1260 Impedance Spectrometer was used, which covers a frequency range of work from 1 μHz to 10 MHz, and its accuracy has been tested in the accomplishment of several applications. Measurements were performed on 3 mL human blood samples, from healthy donors. Reactive strips for sugar test of 2 μL, from Bayer, were used as electrodes, which allow gathering a portion of the sample, to be analyzed by the spectrometer. Preliminary results of these measurements are presented.

  14. Lorentz Force Electrical Impedance Tomography

    CERN Document Server

    Grasland-Mongrain, Pol; Chapelon, Jean-Yves; Lafon, Cyril

    2014-01-01

    This article describes a method called Lorentz Force Electrical Impedance Tomography. The electrical conductivity of biological tissues can be measured through their sonication in a magnetic field: the vibration of the tissues inside the field induces an electrical current by Lorentz force. This current, detected by electrodes placed around the sample, is proportional to the ultrasonic pressure, to the strength of the magnetic field and to the electrical conductivity gradient along the acoustic axis. By focusing at different places inside the sample, a map of the electrical conductivity gradient can be established. In this study experiments were conducted on a gelatin phantom and on a beef sample, successively placed in a 300 mT magnetic field and sonicated with an ultrasonic transducer focused at 21 cm emitting 500 kHz bursts. Although all interfaces are not visible, in this exploratory study a good correlation is observed between the electrical conductivity image and the ultrasonic image. This method offers...

  15. Electrical impedance tomography of electrolysis.

    Science.gov (United States)

    Meir, Arie; Rubinsky, Boris

    2015-01-01

    The primary goal of this study is to explore the hypothesis that changes in pH during electrolysis can be detected with Electrical Impedance Tomography (EIT). The study has relevance to real time control of minimally invasive surgery with electrolytic ablation. To investigate the hypothesis, we compare EIT reconstructed images to optical images acquired using pH-sensitive dyes embedded in a physiological saline agar gel phantom treated with electrolysis. We further demonstrate the biological relevance of our work using a bacterial E.Coli model, grown on the phantom. The results demonstrate the ability of EIT to image pH changes in a physiological saline phantom and show that these changes correlate with cell death in the E.coli model. The results are promising, and invite further experimental explorations.

  16. Electrical impedance tomography of electrolysis.

    Directory of Open Access Journals (Sweden)

    Arie Meir

    Full Text Available The primary goal of this study is to explore the hypothesis that changes in pH during electrolysis can be detected with Electrical Impedance Tomography (EIT. The study has relevance to real time control of minimally invasive surgery with electrolytic ablation. To investigate the hypothesis, we compare EIT reconstructed images to optical images acquired using pH-sensitive dyes embedded in a physiological saline agar gel phantom treated with electrolysis. We further demonstrate the biological relevance of our work using a bacterial E.Coli model, grown on the phantom. The results demonstrate the ability of EIT to image pH changes in a physiological saline phantom and show that these changes correlate with cell death in the E.coli model. The results are promising, and invite further experimental explorations.

  17. Rotations with Rodrigues' Vector

    Science.gov (United States)

    Pina, E.

    2011-01-01

    The rotational dynamics was studied from the point of view of Rodrigues' vector. This vector is defined here by its connection with other forms of parametrization of the rotation matrix. The rotation matrix was expressed in terms of this vector. The angular velocity was computed using the components of Rodrigues' vector as coordinates. It appears…

  18. Bioelectrical impedance for detecting and monitoring lymphedema in patients with breast cancer. Preliminary results of the florence nightingale breast study group.

    Science.gov (United States)

    Erdogan Iyigun, Zeynep; Selamoglu, Derya; Alco, Gul; Pilancı, Kezban Nur; Ordu, Cetin; Agacayak, Filiz; Elbüken, Filiz; Bozdogan, Atilla; Ilgun, Serkan; Guler Uysal, Fusun; Ozmen, Vahit

    2015-03-01

    The aim of this study was to evaluate the efficacy of bioimpedance spectroscopy for the follow-up of patients with lymphedema in Turkey and its benefits in the diagnosis of stage 0, 1, and 2 lymphedema in patients who are under treatment for breast cancer. Thirty-seven female patients with breast cancer who underwent surgical procedures in our Breast Health Centre were followed up for lymphedema using bioimpedance, and clinical measurements were taken for a minimum period of 1 year at 3-month intervals. Patients who had been monitored regularly between November, 2011, and September, 2013, were enrolled to the study. In total, 8 patients developed lymphedema with an overall rate of 21.6%. Among the 8 patients who developed lymphedema, 4 had Stage 2, 1 had Stage 1, and 3 had Stage 0 lymphedema. Stage 0 lymphedema could not be detected with clinical measurements. During the patients' 1-year follow-up period using measurements of bioimpedance, a statistically significant relationship was observed between the occurrence of lymphedema and the disease characteristics. including the number of the extracted and remaining lymph nodes and the region of radiotherapy (p=0.042, p=0.024, p=0.040). Bioimpedance analysis seems to be a practical and reliable method for the early diagnosis of lymphedema. It is believed that regular monitoring of patients in the high-risk group using bioimpedance analyses increases the ability to treat lymphedema.

  19. Multi-frequency bioelectrical impedance analysis (BIA) compared to magnetic resonance imaging (MRI) for estimation of fat-free mass in colorectal cancer patients treated with chemotherapy

    DEFF Research Database (Denmark)

    Palle, Stine Skov; Tang Møllehave, Line; Kadkhoda, Zahra Taheri

    2016-01-01

    undergoing chemotherapy. Design: In an observational, prospective study we examine the relationships between single cross-sectional thighs MRI (T1-weighted (1.5 T) SM compared to FFM BIA (8-electrodes multi-frequency Tanita MC780MA)) and FFM skin-fold thickness (ST) (4-points (Harpenden, Skinfold Caliper...

  20. Change in fat-free mass assessed by bioelectrical impedance, total body potassium and dual energy X-ray absorptiometry during prolonged weight loss

    DEFF Research Database (Denmark)

    Hendel, H W; Gotfredsen, A; Højgaard, L

    1996-01-01

    A total of 16 obese women (body mass index (BMI) 30-43 kg m(-2)) participated in a weight reduction study. Before and after a weight loss of 11.7 +/- 7.4 kg (mean +/- SD), body composition was assessed by dual energy X-ray absorptiometry (DXA), and total body potassium counting (TBK). These measu......A total of 16 obese women (body mass index (BMI) 30-43 kg m(-2)) participated in a weight reduction study. Before and after a weight loss of 11.7 +/- 7.4 kg (mean +/- SD), body composition was assessed by dual energy X-ray absorptiometry (DXA), and total body potassium counting (TBK...

  1. New Application of Bioelectrical Impedance Analysis by the Back Propagation Artificial Neural Network Mathematically Predictive Model of Tissue Composition in the Lower Limbs of Elderly People

    Directory of Open Access Journals (Sweden)

    Tsang-Pai Liu

    2012-03-01

    Conclusion: In summary, the greater predictive accuracy and precision made the application of BIA with the BP–ANN mathematical model more feasible for the clinical measurement of FM and FFM in the lower limbs of elderly people.

  2. Agreement in Body Fat Estimates between a Hand-Held Bioelectrical Impedance Analyzer and Skinfold Thicknesses in African American and Caucasian Adolescents

    Science.gov (United States)

    Hannon, James C.; Ratliffe, Thomas; Williams, Daniel P.

    2006-01-01

    The body mass index (BMI), or the ratio of weight in kilograms to the square of height in meters, is widely used to determine the presence or absence of overweight and obesity in adults. Although many consider BMI an acceptable clinical surrogate of body fatness, it does not differentiate between fat and fat-free tissues. Thus, children and…

  3. Change in fat-free mass assessed by bioelectrical impedance, total body potassium and dual energy X-ray absorptiometry during prolonged weight loss

    DEFF Research Database (Denmark)

    Hendel, H W; Gotfredsen, A; Højgaard, L;

    1996-01-01

    ). These measurements were compared with bioimpedance analysis (BIA) by applying 11 predictive BIA equations published in the literature. Predictive equations for the present study population were developed, with the use of fat-free mass (FFM) as assessed by TBK and DXA as references in multiple regression analysis...

  4. Wearable Multi-Frequency and Multi-Segment Bioelectrical Impedance Spectroscopy for Unobtrusively Tracking Body Fluid Shifts during Physical Activity in Real-Field Applications: A Preliminary Study

    National Research Council Canada - National Science Library

    Villa, Federica; Magnani, Alessandro; Maggioni, Martina A; Stahn, Alexander; Rampichini, Susanna; Merati, Giampiero; Castiglioni, Paolo

    2016-01-01

    .... However, neither portable commercial instruments nor more advanced wearable prototypes simultaneously satisfy the demanding needs of unobtrusively tracking body fluid shifts in different segments...

  5. Physical fitness of secondary school adolescents in relation to the body weight and the body composition: classification according to Bioelectrical Impedance Analysis. Part II.

    Science.gov (United States)

    Chwałczyńska, Agnieszka; Jędrzejewski, Grzegorz; Lewandowski, Zdzisław; Jonak, Wiesława; Sobiech, Krzysztof A

    2017-03-01

    Underweight and obesity are important factors affecting the level of physical fitness. The aim of this study was to assess physical fitness of lower secondary school adolescents in relation to BMI. Two-hundred students, aged 14-16, were examined. Respondents were divided into 4 groups according to BMI classification. The body height and weight were determined. Physical fitness was assessed on the basis Zuchora's ISF tests. The body weight deficiency occurred in 3% of girls and 5% of boys, overweight was noted in 14% of both groups, and obesity in 6% and 12% accordingly. Statistically significant differences were determined in the components of physical fitness. They were noted in both genders between the group of children with standard body weight and overweight as well as obese children. Significant negative correlations were determined between and the components of physical fitness. More significant correlations giving evidence to the decrease of Zuchora's ISF score along with the increase of BMI were more significant in girls. Statistically significant differences between the boys and girls were determined in all five Zuchora's tests. The highest scores in physical fitness were achieved by the boys and girls with weight deficiency.

  6. A comparison between handgrip strength, upper limb fat free mass by segmental bioelectrical impedance analysis (SBIA) and anthropometric measurements in young males

    Science.gov (United States)

    Gonzalez-Correa, C. H.; Caicedo-Eraso, J. C.; Varon-Serna, D. R.

    2013-04-01

    The mechanical function and size of a muscle may be closely linked. Handgrip strength (HGS) has been used as a predictor of functional performing. Anthropometric measurements have been made to estimate arm muscle area (AMA) and physical muscle mass volume of upper limb (ULMMV). Electrical volume estimation is possible by segmental BIA measurements of fat free mass (SBIA-FFM), mainly muscle-mass. Relationship among these variables is not well established. We aimed to determine if physical and electrical muscle mass estimations relate to each other and to what extent HGS is to be related to its size measured by both methods in normal or overweight young males. Regression analysis was used to determine association between these variables. Subjects showed a decreased HGS (65.5%), FFM, (85.5%) and AMA (74.5%). It was found an acceptable association between SBIA-FFM and AMA (r2 = 0.60) and poorer between physical and electrical volume (r2 = 0.55). However, a paired Student t-test and Bland and Altman plot showed that physical and electrical models were not interchangeable (ptanthropometric (r2 = 0.07) and electrical (r2 = 0.192) ULMMV showing that muscle mass quantity does not mean muscle strength. Other factors influencing HGS like physical training or nutrition require more research.

  7. Exploring characteristics of bioelectricity generation and dye decolorization of mixed and pure bacterial cultures from wine-bearing wastewater treatment.

    Science.gov (United States)

    Han, Jing-Long; Liu, Ying; Chang, Chang-Tang; Chen, Bor-Yann; Chen, Wen-Ming; Xu, Hui-Zhong

    2011-04-01

    This study uncovered microbial characteristics of bioelectricity generation and dye decolorization in single-chamber microbial fuel cells (MFCs) using activated sludge for wine-containing wastewater treatment. Phylogenetic tree analysis on 16S rRNA gene fragments indicated that the predominant strains on anodic biofilm in acclimatized MFCs were Gamma-Proteobacteria Aeromonas punctata NIU-P9, Pseudomonas plecoglossicida NIU-Y3, Pseudomonas koreensis NIU-X8, Acinetobacter junii NIU-Y8, Stenotrophomonas maltophila NIU-X2. Our findings showed that the current production capabilities of these pure strains were only ca. 10% of those of their mother activated sludge, indicating that synergistic interactions among microbes might be the most influential factor to maximize power generation in MFCs. Plus, these electrochemically active strains also performed reductive decolorization of C.I. reactive blue 160, suggesting that bioelectricity generation might be directly associated to azo dye decolorization to deal with electron transfer on anodic biofilm in MFCs.

  8. New OTRA-Based Generalized Impedance Simulator

    OpenAIRE

    Ashish Gupta; Raj Senani; Bhaskar, D. R.; Singh, A. K.

    2013-01-01

    Operational transresistance amplifier (OTRA) has attracted considerable attention in the recent literature in several applications such as impedance simulation, universal biquad filter realization, realization of sinusoidal oscillators and multivibrators. However, to the best knowledge of the authors, any OTRA-based generalized impedance simulator circuits have not been reported so far. The purpose of this paper is to present such a circuit.

  9. Quadratic Boost A-Source Impedance Network

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Blaabjerg, Frede; Chub, Andrii

    2016-01-01

    A novel quadratic boost A-source impedance network is proposed to realize converters that demand very high voltage gain. To satisfy the requirement, the network uses an autotransformer where the obtained gain is quadratically dependent on the duty ratio and is unmatched by any existing impedance ...

  10. Quantification of coating aging using impedance measurements

    NARCIS (Netherlands)

    Westing, E.P.M. van; Weijde, D.H. van der; Vreijling, M.P.W.; Ferrari, G.M.; Wit, J.H.W. de

    1998-01-01

    This chapter shows the application results of a novel approach to quantify the ageing of organic coatings using impedance measurements. The ageing quantification is based on the typical impedance behaviour of barrier coatings in immersion. This immersion behaviour is used to determine the limiting c

  11. Impedance of a slotted-pipe kicker

    Energy Technology Data Exchange (ETDEWEB)

    Feng Zhou [Academia Sinica, Beijing, BJ (China). Inst. of High Energy Physics

    1996-08-01

    This paper introduces the principle of a new slotted kicker simply, which is made by using vacuum pipe itself with proper slits as current conductors, and then, presents a rough estimation of its longitudinal and transverse impedance, respectively. Calculation shows that its impedance is reduced significantly compared to our present air-coil kicker. (author)

  12. Possibilities of electrical impedance tomography in gynecology

    Science.gov (United States)

    V, Trokhanova O.; A, Chijova Y.; B, Okhapkin M.; V, Korjenevsky A.; S, Tuykin T.

    2013-04-01

    The paper describes results of comprehensive EIT diagnostics of mammary glands and cervix. The data were obtained from examinations of 170 patients by EIT system MEM (multi-frequency electrical impedance mammograph) and EIT system GIT (gynecological impedance tomograph). Mutual dependence is discussed.

  13. Active impedance matching of complex structural systems

    Science.gov (United States)

    Macmartin, Douglas G.; Miller, David W.; Hall, Steven R.

    1991-01-01

    Viewgraphs on active impedance matching of complex structural systems are presented. Topics covered include: traveling wave model; dereverberated mobility model; computation of dereverberated mobility; control problem: optimal impedance matching; H2 optimal solution; statistical energy analysis (SEA) solution; experimental transfer functions; interferometer actuator and sensor locations; active strut configurations; power dual variables; dereverberation of complex structure; dereverberated transfer function; compensators; and relative power flow.

  14. Dynamic of bioelectric activity back hypothalamus changes in conditions of pyroxan application on the background of stress-reaction developmen

    Directory of Open Access Journals (Sweden)

    T. G. Chaus

    2005-04-01

    Full Text Available The dynamic of changes of capacity of electroencephalogram’s rhythms back hypothalamus at animals of control group and group in stress conditions in parallel with rats who on a background of stress development accepted pyroxan is analyzed. The submitted results have shown influence of a pharmacological preparation pyroxan on bioelectric activity of back hypothalamus in stress conditions that restoration of electric activity under action of this preparation was more shown at 3 weeks of its application.

  15. [Evaluation of nutritional Status in lung cancer using bio electrical impedance analysis and mini nutritional assessment].

    Science.gov (United States)

    Daghfous, Hafaoua; El Ayeb, Wejdène; Alouane, Leila; Tritar, Fatma

    2014-12-01

    Malnutrition and cachexia were a frequent problem in lung cancer and increases the risks of morbidity and mortality in these patients. Bioelectrical impedance analysis (BIA) is easy, non-invasive and reproducible method that can be performed. Evaluate nutritional status in patients with primary lung cancer by Mini Nutritional Assessment (MNA), BIA and anthropometric values (weight, arm and calf circumferences) and correlate the nutritional parameters to severity of cancer and histopathology. The nutritional status of 73 cases of primary lung cancer was evaluated by anthropometric parameters, MNA test and impedencemetrie Results: According to body mass index (BMI), malnutrition, overweight and obesity were noted in 34,2%, 13,7% and 5,5%. According to BMI, free-fat mass index (FFMI) and fat mass index (FMI), the investigations occurred malnutrition and depletion of muscle in respectively 19,2% and 23,3% of cases. Fat depletion was noted in 21,9%. Overweight and obesity were detected in 6,8% and 5,5% of cases. Assessment by MNA, revealed that 28,7% of patients were already malnourished and 49,3% of patients were at risk of malnutrition. A significant correlation existed between the score of MNA and arm and calf circumferences, FFMI and FMI. FMI was significantly lower in group of patients with small lung carcinoma. Only FFMI allows early detection of malnutrition in cancer patients overestimated by measuring BMI and arm circumference was the better indicator of depletion of muscle.

  16. Transient impedance changes in venous endothelial monolayers as a biological radiation dosimetry response

    Directory of Open Access Journals (Sweden)

    Erik Fossum Young

    2012-10-01

    Full Text Available In March of 2011, a magnitude 9.0 earthquake and subsequent 14 m-high tsunami caused major damage to the Fukushima Daiichi nuclear power plant in Japan.  While cancer incidence in the radiation-exposed population is a logical concern, the complex effects of radiation on the heart and cardiovascular system are also of interest.  Immediate and early vascular radiation effects could be exploited as a dosimetry modality.  To test whether non-coronary vasculature exhibited transient perturbation in barrier function, video microscopy studies and Electric Cell Substrate Impedance Sensing technology were used to probe very subtle changes in primary human vascular endothelium.  Human umbilical vein endothelial cell (HUVEC monolayers exhibit a transient, statistically significant decrease (P = 0.017 in monolayer resistance 3 h after irradiation with 5.0 Gy of g rays.  Radiation induced perturbations in HUVEC monolayer permeability are similar in magnitude and kinetics to those observed in coronary arterial endothelium.  Therefore, at least two types of vasculature respond to radiation on ECIS arrays with an early transient disruption in permeability.  The finding supports the use of early passage HUVECs for use in bioelectric dosimetry studies of vasculature and suggests that permeability of vessels could potentially serve as a biological dosimetry tool.

  17. Impedance Spectroscopy of Dielectrics and Electronic Conductors

    DEFF Research Database (Denmark)

    Bonanos, Nikolaos; Pissis, Polycarpos; Macdonald, J. Ross

    2013-01-01

    Impedance spectroscopy is used for the characterization of materials, such as electroceramics, solid and liquid electrochemical cells, dielectrics and also fully integrated devices, such as fuel cells. It consists of measuring the electrical impedance - or a closely related property, such as admi......Impedance spectroscopy is used for the characterization of materials, such as electroceramics, solid and liquid electrochemical cells, dielectrics and also fully integrated devices, such as fuel cells. It consists of measuring the electrical impedance - or a closely related property......, and procedures for the correction of measurement errors. The applications of impedance spectroscopy are illustrated with examples from electroceramics and polymer-based dielectric systems. The way in which the technique is applied to the two classes of materials is compared with reference to the different models...

  18. Fractional Order Element Based Impedance Matching

    KAUST Repository

    Radwan, Ahmed Gomaa

    2014-06-24

    Disclosed are various embodiments of methods and systems related to fractional order element based impedance matching. In one embodiment, a method includes aligning a traditional Smith chart (|.alpha.|=1) with a fractional order Smith chart (|.alpha.|.noteq.1). A load impedance is located on the traditional Smith chart and projected onto the fractional order Smith chart. A fractional order matching element is determined by transitioning along a matching circle of the fractional order Smith chart based at least in part upon characteristic line impedance. In another embodiment, a system includes a fractional order impedance matching application executed in a computing device. The fractional order impedance matching application includes logic that obtains a first set of Smith chart coordinates at a first order, determines a second set of Smith chart coordinates at a second order, and determines a fractional order matching element from the second set of Smith chart coordinates.

  19. Update of the SPS Impedance Model

    CERN Document Server

    Salvant, B; Zannini, C; Arduini, G; Berrig, O; Caspers, F; Grudiev, A; Métral, E; Rumolo, G; Shaposhnikova, E; Zotter, B; Migliorati, M; Spataro, B

    2010-01-01

    The beam coupling impedance of the CERN SPS is expected to be one of the limitations to an intensity upgrade of the LHC complex. In order to be able to reduce the SPS impedance, its main contributors need to be identified. An impedance model for the SPS has been gathered from theoretical calculations, electromagnetic simulations and bench measurements of single SPS elements. The current model accounts for the longitudinal and transverse impedance of the kickers, the horizontal and vertical electrostatic beam position monitors, the RF cavities and the 6.7 km beam pipe. In order to assess the validity of this model, macroparticle simulations of a bunch interacting with this updated SPS impedance model are compared to measurements performed with the SPS beam.

  20. Performance of Microbial Fuel Cell to Generate Bioelectricity Uses Different Kinds of Electrode in the Fish Processing Wastewater

    Directory of Open Access Journals (Sweden)

    Bustami Ibrahim

    2017-08-01

    Full Text Available Microbial Fuel Cell (MFC is one of the alternative technologies which can convert chemical energy to electrical energy through a catalytic reaction using microorganisms. The technology can be implemented for wastewater handling such as fish processing wastewater which contains highly in organic substances. The research objective was to measure the performance of MFC system using fishery processing wastewater in order to generate bioelectricity and to reduce its organic pollution load within a different material of the electrode. The electrode materials used were aluminum, iron, carbon graphite, and also the combination of aluminum and carbon graphite. The research carried out in three phases: production of fishery wastewater, assembly of MFC single chamber system and measurement of the bioelectricity produced. The bioelectricity power resulted during 120 hours of observation were 0.23V for aluminum, 0.17V for iron, 0.19V for carbon graphite, and 0.34V for the combination between aluminum and carbon graphite averagely. The MFC system can also  decrease the organic load parameter of wastewater as much as total Nitrogen was 61%, BOD 30.11%, COD 59.34%, and total Nitrogen Ammonia 12.45%. The increasing of activated sludge biomass occurred on the last observation with MLSS and MLVSS values respectively 7,066.67 mg/L and 6,100 mg/L.

  1. Soft computing applications in high impedance fault detection in distribution systems

    Energy Technology Data Exchange (ETDEWEB)

    Sedighi, A.-R.; Haghifam, M.-R. [Department of Electrical Engineering, Tarbiat Modarres University, P.O. Box 14115-111, Tehran (Iran); Malik, O.P. [Department of Electrical and Computer Engineering, University of Calgary, Calgary, Alberta (Canada T2N 1N4)

    2005-09-15

    Two methods, one based on genetic algorithm (GA) and one based on neural networks (NN), are proposed for high impedance fault (HIF) detection in distribution systems. These methods are used to discriminate HIFs from isolator leakage current (ILC) and transients such as capacitor switching, load switching (high/low voltage), ground fault, inrush current and no load line switching. Wavelet transform is used for the decomposition of signals and feature extraction in both methods. In one method, GA is used for feature vector reduction and Bayes for classification. In the other method, principal component analysis (PCA) is applied for feature vector reduction and NN for classification. HIF and ILC data was acquired by experimental tests and the data for other faults was obtained by simulating a real network using EMTP. Results show that either of the proposed procedures can be used to identify HIF from other events efficiently. (author) [Bayes classifier; High impedance fault; Genetic algorithm; Neural network; Principal component analysis; Wavelet transform].

  2. Impedance matching at arterial bifurcations.

    Science.gov (United States)

    Brown, N

    1993-01-01

    Reflections of pulse waves will occur in arterial bifurcations unless the impedance is matched continuously through changing geometric and elastic properties. A theoretical model is presented which minimizes pulse wave reflection through bifurcations. The model accounts for the observed linear changes in area within the bifurcation, generalizes the theory to asymmetrical bifurcations, characterizes changes in elastic properties from parent to daughter arteries, and assesses the effect of branch angle on the mechanical properties of daughter vessels. In contradistinction to previous models, reflections cannot be minimized without changes in elastic properties through bifurcations. The theoretical model predicts that in bifurcations with area ratios (beta) less than 1.0 Young's moduli of daughter vessels may be less than that in the parent vessel if the Womersley parameter alpha in the parent vessel is less than 5. Larger area ratios in bifurcations are accompanied by greater increases in Young's moduli of branches. For an idealized symmetric aortic bifurcation (alpha = 10) with branching angles theta = 30 degrees (opening angle 60 degrees) Young's modulus of common iliac arteries relative to that of the distal abdominal aorta has an increase of 1.05, 1.68 and 2.25 for area ratio of 0.8, 1.0 and 1.15, respectively. These predictions are consistent with the observed increases in Young's moduli of peripheral vessels.(ABSTRACT TRUNCATED AT 250 WORDS)

  3. Concise vector analysis

    CERN Document Server

    Eliezer, C J; Maxwell, E A; Sneddon, I N

    1963-01-01

    Concise Vector Analysis is a five-chapter introductory account of the methods and techniques of vector analysis. These methods are indispensable tools in mathematics, physics, and engineering. The book is based on lectures given by the author in the University of Ceylon.The first two chapters deal with vector algebra. These chapters particularly present the addition, representation, and resolution of vectors. The next two chapters examine the various aspects and specificities of vector calculus. The last chapter looks into some standard applications of vector algebra and calculus.This book wil

  4. Light axial vector mesons

    CERN Document Server

    Chen, Kan; Liu, Xiang; Matsuki, Takayuki

    2015-01-01

    Inspired by the abundant experimental observation of axial vector states, we study whether the observed axial vector states can be categorized into the conventional axial vector meson family. In this paper we carry out analysis based on the mass spectra and two-body Okubo-Zweig-Iizuka-allowed decays. Besides testing the possible axial vector meson assignments, we also predict abundant information for their decays and the properties of some missing axial vector mesons, which are valuable to further experimental exploration of the observed and predicted axial vector mesons.

  5. Rotor damage detection by using piezoelectric impedance

    Science.gov (United States)

    Qin, Y.; Tao, Y.; Mao, Y. F.

    2016-04-01

    Rotor is a core component of rotary machinery. Once the rotor has the damage, it may lead to a major accident. Thus the quantitative rotor damage detection method based on piezoelectric impedance is studied in this paper. With the governing equation of piezoelectric transducer (PZT) in a cylindrical coordinate, the displacement along the radius direction is derived. The charge of PZT is calculated by the electric displacement. Then, by the use of the obtained displacement and charge, an analytic piezoelectric impedance model of the rotor is built. Given the circular boundary condition of a rotor, annular elements are used as the analyzed objects and spectral element method is used to set up the damage detection model. The Electro-Mechanical (E/M) coupled impedance expression of an undamaged rotor is deduced with the application of a low-cost impedance test circuit. A Taylor expansion method is used to obtain the approximate E/M coupled impedance expression for the damaged rotor. After obtaining the difference between the undamaged and damaged rotor impedance, a rotor damage detection method is proposed. This method can directly calculate the change of bending stiffness of the structural elements, it follows that the rotor damage can be effectively detected. Finally, a preset damage configuration is used for the numerical simulation. The result shows that the quantitative damage detection algorithm based on spectral element method and piezoelectric impedance proposed in this paper can identify the location and the severity of the damaged rotor accurately.

  6. Tracking of electrochemical impedance of batteries

    Science.gov (United States)

    Piret, H.; Granjon, P.; Guillet, N.; Cattin, V.

    2016-04-01

    This paper presents an evolutionary battery impedance estimation method, which can be easily embedded in vehicles or nomad devices. The proposed method not only allows an accurate frequency impedance estimation, but also a tracking of its temporal evolution contrary to classical electrochemical impedance spectroscopy methods. Taking into account constraints of cost and complexity, we propose to use the existing electronics of current control to perform a frequency evolutionary estimation of the electrochemical impedance. The developed method uses a simple wideband input signal, and relies on a recursive local average of Fourier transforms. The averaging is controlled by a single parameter, managing a trade-off between tracking and estimation performance. This normalized parameter allows to correctly adapt the behavior of the proposed estimator to the variations of the impedance. The advantage of the proposed method is twofold: the method is easy to embed into a simple electronic circuit, and the battery impedance estimator is evolutionary. The ability of the method to monitor the impedance over time is demonstrated on a simulator, and on a real Lithium ion battery, on which a repeatability study is carried out. The experiments reveal good tracking results, and estimation performance as accurate as the usual laboratory approaches.

  7. Cascaded impedance networks for NPC inverter

    DEFF Research Database (Denmark)

    Li, Ding; Gao, Feng; Loh, Poh Chiang;

    2010-01-01

    would have a higher output voltage gain. It is anticipated that it would help the formed inverters find applications in photovoltaic and other renewable systems, where a high voltage gain is usually requested. Experimental testing has already been conducted and verifies the theory. ©2010 IEEE....... they are subject to the renewable sources. To date, three distinct types of impedance networks can be summarized for implementing a hybrid source impedance network, which can in principle be combined and cascaded before connected to a NPC inverter by proposed two ways. The resulting cascaded impedance network NPC...

  8. SPATIAL VARIABILITY OF PEDOZEMS MECHANICAL IMPEDANCE

    Directory of Open Access Journals (Sweden)

    Zhukov A.V.

    2013-04-01

    Full Text Available We studied the spatial variability of pedozem mechanical impedance in ResearchRemediation Center of the Dnipropetrovsk State Agrarian University in Ordzhonikidze. Thestatistical distribution of the soil mechanical impedance within the studied area is characterized by deviation from the normal law in 0–10 and 30–50 cm layers from the surface. 2D and 3D modeling shows the structural design of the soil as locations of high mechanical impedance which found in the soils with less hardness.

  9. Electrical Impedance Measurements of PZT Nanofiber Sensors

    Directory of Open Access Journals (Sweden)

    Richard Galos

    2017-01-01

    Full Text Available Electrical impedance measurements of PZT nanofiber sensors were performed using a variety of methods over a frequency spectrum ranging from DC to 1.8 GHz. The nanofibers formed by electrospinning with diameters ranging from 10 to 150 nm were collected and integrated into sensors using microfabrication techniques. Special matching circuits with ultrahigh input impedance were fabricated to produce low noise, measurable sensor outputs. Material properties including resistivity and dielectric constant are derived from the impedance measurements. The resulting material properties are also compared with those of individual nanofibers being tested using conductive AFM and Scanning Conductive Microscopy.

  10. Electrochemical Impedance Studies of SOFC Cathodes

    DEFF Research Database (Denmark)

    Hjelm, Johan; Søgaard, Martin; Wandel, Marie

    2007-01-01

    impedance of the cathode at intermediate operating temperatures. The perovskite is of the La-Sr-Co-Fe type. The EIS response of symmetrical cells with a thick (similar to 200 mu m) gadolinia doped ceria electrolyte was compared with the impedance contribution of the cathode of a full anode supported cell....... The full cells had a Ni-YSZ anode and anode support, a thin YSZ electrolyte, and a CGO barrier layer. The symmetric and full cell cathode responses were compared at open-circuit voltage. Humidified hydrogen was used as the fuel in the full cell measurements. Differential analysis of the impedance data...

  11. Wearable impedance monitoring system for dialysis patients.

    Science.gov (United States)

    Bonnet, S; Bourgerette, A; Gharbi, S; Rubeck, C; Arkouche, W; Massot, B; McAdams, E; Montalibet, A; Jallon, P

    2016-08-01

    This paper describes the development and the validation of a prototype wearable miniaturized impedance monitoring system for remote monitoring in home-based dialysis patients. This device is intended to assess the hydration status of dialysis patients using calf impedance measurements. The system is based on the low-power AD8302 component. The impedance calibration procedure is described together with the Cole parameter estimation and the hydric volume estimation. Results are given on a test cell to validate the design and on preliminary calf measurements showing Cole parameter variations during hemodialysis.

  12. Universal impedance fluctuations in wave chaotic systems.

    Science.gov (United States)

    Hemmady, Sameer; Zheng, Xing; Ott, Edward; Antonsen, Thomas M; Anlage, Steven M

    2005-01-14

    We experimentally investigate theoretical predictions of universal impedance fluctuations in wave chaotic systems using a microwave analog of a quantum chaotic infinite square well potential. We emphasize the use of the radiation impedance to remove the nonuniversal effects of the particular coupling between the outside world and the scatterer. Specific predictions that we test include the probability density functions (PDFs) of the real and imaginary parts of the universal impedance, the equality of the variances of these PDFs, and the dependence of these PDFs on a single loss parameter.

  13. VectorBase

    Data.gov (United States)

    U.S. Department of Health & Human Services — VectorBase is a Bioinformatics Resource Center for invertebrate vectors. It is one of four Bioinformatics Resource Centers funded by NIAID to provide web-based...

  14. Bioelectricity-assisted partial degradation of linear polyacrylamide in a bioelectrochemical system.

    Science.gov (United States)

    Cui, Yu-Zhi; Zhang, Jian; Sun, Min; Zhai, Lin-Feng

    2015-01-01

    The wide application of water-soluble linear polyacrylamides (PAMs) can cause serious environmental pollution. Biological treatment of PAMs receives very limited efficiency due to their recalcitrance to the microbial degradation. Here, we show the bioelectrochemical system (BES) can be used as an effective strategy to improve the biodegradation efficiency of PAMs. A linear PAM with viscosity-average molecular weight of 5 × 10(6) was treated in the anodic chamber of BES reactor, and the change of PAM structure during the degradation process was investigated. The anodic bacteria in the BES demonstrated abilities to utilize the PAM as the sole carbon and nitrogen source to generate electricity. Both the anode-attached and planktonic bacteria contributed to the electricity generation, while the anode-attached community exhibited stronger electron transfer ability than the planktonic one. The closed-circuit and open-circuit operations of the BES reactor obtained chemical oxygen demand (COD) removal efficiencies of 32.5 and 7.4 %, respectively, implying the generation of bioelectricity could enhance the biodegradation of PAM. Structure analysis suggested the carbon chain of PAM was partially degraded in the BES, producing polymeric products with lower molecular weight. The microbial cleavage of the carbon chain was proposed to start from the "head-to-head" linkages and end with the formation of ether bonds.

  15. Evoked bioelectrical activity of efferent fibers of the sciatic nerve of white rats in experimental menopause

    Directory of Open Access Journals (Sweden)

    Rodinsky A.G.

    2016-03-01

    Full Text Available The aim of our work was analysis of the bioelectrical activity of efferent fibers of the sciatic nerve in experimental menopause condition. Experiments were performed on 25 female white rats, divided into experimental and control groups. Menopause was modeled by total ovariohysterectomy. In 120 days after modeling we had recorded evoked action potentials of fibers of isolated ventral root L5 induced by stimulation of sciatic nerve with rectangular pulses. Threshold, chronaxia, latency, amplitude and duration of the action potential (AP were analysed. Refractory phenomenon was investigated by applying paired stimuli at intervals of 2 to 20 ms. In the context of long-term hypoestrogenemy threshold of AP appearance was 55,32±7,69%, chronaxy – 115,09±2,67%, latent period – 112,62±1,74% as compared with the control animals (p<0.01. In conditions of paired stimuli applying the amplitude of response to the testing stimulus in animals with ovariohysterectomy at intervals 3 and 4 ms was 61,25±36,45% and 53,48±18,64% (p<0.05 respectively.

  16. Polarization Force Microscopy of the Cell-Mineral Interface: Insights Into the Bioelectric Signature

    Science.gov (United States)

    Bartosik, E. M.; Kendall, T. A.

    2007-12-01

    The success of bioremediation strategies is dependent upon effective monitoring of microorganisms in the subsurface. Induced polarization (IP) may represent a cost-effective, complementary technique to existing borehole-based microbe detection schemes. Recent studies show a significant, yet poorly understood IP effect associated with the presence of bacteria in aqueous and porous media. This effect is believed to be rooted in the physicochemical surface interactions between cells and minerals which we probe using polarization and electric force microscopy. Dispersions of the local permittivity inferred from polarization force data that was collected over a hydrated mineral surface correspond to dispersions modeled for a bacterium. In each case, absolute permittivities and frequency cut-off values increase with surface potential and ion mobility, respectively. Potentially similar polarization mechanisms between the inorganic and organic condition are inferred. Further polarization force microscopy measurements of the mineral-microbe interface will provide molecular-level insight that complements column and field-scale IP observations. Anticipated is a more comprehensive mechanisitic description of the bioelectric IP response that facilitates application of IP to bioremediation.

  17. [Study on effects of bioelectric parameters of rats in electromagnetic radiation of HV transmission line].

    Science.gov (United States)

    Zhang, Anying; Pang, Xiaofeng; Yuan, Ping

    2007-02-01

    With the development of economy and coming of information era, the chance of exposure to electromagnetic fields with various frequencies has been increased for every human. The effects of electromagnetic radiattion on human being's health are versatile. To study the effects of bioelctronic parameters of rats in the electromagnetic radiations of HV transmission line, EEG, ECG and CMAP were measured in rats exposed to simulating high-voltage transmission line electromagnetic radiation for over one year. Brain tissues were studied by Fourier transform infrared spectroscopy. The results showed that no significant difference between exposed group and control group in EEG; however the FT-infrared spectra of brain tissues were different; the ECG of the exposed animals was considerably altered. Significant slowing of heart rate was observed in those rates exposed to EMFs; the latent period of CMAP in exposed group were not different compared with those of control group however there was a significant difference in wave amplitude of CMAP between the exposed group and control group. All results indicated that there must be some effects on bioelectric parameters of rats exposed to electromagnetic radiation of high-voltage transmission line for a long time.

  18. Bioelectricity generation and dewatered sludge degradation in microbial capacitive desalination cell.

    Science.gov (United States)

    Meng, Fanyu; Zhao, Qingliang; Na, Xiaolin; Zheng, Zhen; Jiang, Junqiu; Wei, Liangliang; Zhang, Jun

    2016-05-18

    Microbial desalination cell (MDC) is a new approach for the synergy in bioelectricity generation, desalination and organic waste treatment without additional power input. However, current MDC systems cause salt accumulation in anodic wastewater and sludge. A microbial capacitive desalination cell (MCDC) with dewatered sludge as anodic substrate was developed to address the salt migration problem and improve the sludge recycling value by special designed-membrane assemblies, which consisted of cation exchange membranes (CEMs), layers of activated carbon cloth (ACC), and nickel foam. Experimental results indicated that the maximum power output of 2.06 W/m(3) with open circuit voltage (OCV) of 0.942 V was produced in 42 days. When initial NaCl concentration was 2 g/L, the desalinization rate was about 15.5 mg/(L·h) in the first 24 h, indicating that the MCDC reactor was suitable to desalinize the low concentration salt solution rapidly. The conductivity of the anodic substrate decreased during the 42-day operation; the CEM/ACC/Ni assemblies could effectively restrict the salt accumulation in MCDC anode and promote dewatered sludge effective use by optimizing the dewatered sludge properties, such as organic matter, C/N, pH value, and electric conductivity (EC).

  19. Bioelectricity generation and microcystins removal in a blue-green algae powered microbial fuel cell.

    Science.gov (United States)

    Yuan, Yong; Chen, Qing; Zhou, Shungui; Zhuang, Li; Hu, Pei

    2011-03-15

    Bioelectricity production from blue-green algae was examined in a single chamber tubular microbial fuel cell (MFC). The blue-green algae powered MFC produced a maximum power density of 11 4 mW/m(2) at a current density of 0.55 mA/m(2). Coupled with the bioenergy generation, high removal efficiencies of chemical oxygen demand (COD) and nitrogen were also achieved in MFCs. Over 78.9% of total chemical oxygen demand (TCOD), 80.0% of soluble chemical oxygen demand (SCOD), 91.0% of total nitrogen (total-N) and 96.8% ammonium-nitrogen (NH(3)-N) were removed under closed circuit conditions in 12 days, which were much more effective than those under open circuit and anaerobic reactor conditions. Most importantly, the MFC showed great ability to remove microcystins released from blue-green algae. Over 90.7% of MC-RR and 91.1% of MC-LR were removed under closed circuit conditions (500Ω). This study showed that the MFC could provide a potential means for electricity production from blue-green algae coupling algae toxins removal.

  20. Improvement of human keratinocyte migration by a redox active bioelectric dressing.

    Science.gov (United States)

    Banerjee, Jaideep; Das Ghatak, Piya; Roy, Sashwati; Khanna, Savita; Sequin, Emily K; Bellman, Karen; Dickinson, Bryan C; Suri, Prerna; Subramaniam, Vish V; Chang, Christopher J; Sen, Chandan K

    2014-01-01

    Exogenous application of an electric field can direct cell migration and improve wound healing; however clinical application of the therapy remains elusive due to lack of a suitable device and hence, limitations in understanding the molecular mechanisms. Here we report on a novel FDA approved redox-active Ag/Zn bioelectric dressing (BED) which generates electric fields. To develop a mechanistic understanding of how the BED may potentially influence wound re-epithelialization, we direct emphasis on understanding the influence of BED on human keratinocyte cell migration. Mapping of the electrical field generated by BED led to the observation that BED increases keratinocyte migration by three mechanisms: (i) generating hydrogen peroxide, known to be a potent driver of redox signaling, (ii) phosphorylation of redox-sensitive IGF1R directly implicated in cell migration, and (iii) reduction of protein thiols and increase in integrinαv expression, both of which are known to be drivers of cell migration. BED also increased keratinocyte mitochondrial membrane potential consistent with its ability to fuel an energy demanding migration process. Electric fields generated by a Ag/Zn BED can cross-talk with keratinocytes via redox-dependent processes improving keratinocyte migration, a critical event in wound re-epithelialization.

  1. Improvement of human keratinocyte migration by a redox active bioelectric dressing.

    Directory of Open Access Journals (Sweden)

    Jaideep Banerjee

    Full Text Available Exogenous application of an electric field can direct cell migration and improve wound healing; however clinical application of the therapy remains elusive due to lack of a suitable device and hence, limitations in understanding the molecular mechanisms. Here we report on a novel FDA approved redox-active Ag/Zn bioelectric dressing (BED which generates electric fields. To develop a mechanistic understanding of how the BED may potentially influence wound re-epithelialization, we direct emphasis on understanding the influence of BED on human keratinocyte cell migration. Mapping of the electrical field generated by BED led to the observation that BED increases keratinocyte migration by three mechanisms: (i generating hydrogen peroxide, known to be a potent driver of redox signaling, (ii phosphorylation of redox-sensitive IGF1R directly implicated in cell migration, and (iii reduction of protein thiols and increase in integrinαv expression, both of which are known to be drivers of cell migration. BED also increased keratinocyte mitochondrial membrane potential consistent with its ability to fuel an energy demanding migration process. Electric fields generated by a Ag/Zn BED can cross-talk with keratinocytes via redox-dependent processes improving keratinocyte migration, a critical event in wound re-epithelialization.

  2. Improvement of Human Keratinocyte Migration by a Redox Active Bioelectric Dressing

    Science.gov (United States)

    Banerjee, Jaideep; Das Ghatak, Piya; Roy, Sashwati; Khanna, Savita; Sequin, Emily K.; Bellman, Karen; Dickinson, Bryan C.; Suri, Prerna; Subramaniam, Vish V.; Chang, Christopher J.; Sen, Chandan K.

    2014-01-01

    Exogenous application of an electric field can direct cell migration and improve wound healing; however clinical application of the therapy remains elusive due to lack of a suitable device and hence, limitations in understanding the molecular mechanisms. Here we report on a novel FDA approved redox-active Ag/Zn bioelectric dressing (BED) which generates electric fields. To develop a mechanistic understanding of how the BED may potentially influence wound re-epithelialization, we direct emphasis on understanding the influence of BED on human keratinocyte cell migration. Mapping of the electrical field generated by BED led to the observation that BED increases keratinocyte migration by three mechanisms: (i) generating hydrogen peroxide, known to be a potent driver of redox signaling, (ii) phosphorylation of redox-sensitive IGF1R directly implicated in cell migration, and (iii) reduction of protein thiols and increase in integrinαv expression, both of which are known to be drivers of cell migration. BED also increased keratinocyte mitochondrial membrane potential consistent with its ability to fuel an energy demanding migration process. Electric fields generated by a Ag/Zn BED can cross-talk with keratinocytes via redox-dependent processes improving keratinocyte migration, a critical event in wound re-epithelialization. PMID:24595050

  3. Enhanced bioelectricity harvesting in microbial fuel cells treating food waste leachate produced from biohydrogen fermentation.

    Science.gov (United States)

    Choi, Jeongdong; Ahn, Youngho

    2015-05-01

    Microbial fuel cells (MFCs) treating the food waste leachate produced from biohydrogen fermentation were examined to enhance power generation and energy recovery. In batch mode, the maximum voltage production was 0.56 V and the power density reached 1540 mW/m(2). The maximum Coulombic efficiency (CEmax) and energy efficiency (EE) in the batch mode were calculated to be 88.8% and 18.8%, respectively. When the organic loading rate in sequencing batch mode varied from 0.75 to 6.2 g COD/L-d (under CEmax), the maximum power density reached 769.2 mW/m(2) in OLR of 3.1 g COD/L-d, whereas higher energy recovery (CE=52.6%, 0.346 Wh/g CODrem) was achieved at 1.51 g COD/L-d. The results demonstrate that readily biodegradable substrates in biohydrogen fermentation can be effectively used for the enhanced bioelectricity harvesting of MFCs and a MFC coupled with biohydrogen fermentation is of great benefit on higher electricity generation and energy efficiency.

  4. On Double Vector Bundles

    Institute of Scientific and Technical Information of China (English)

    Zhuo CHEN; Zhang Ju LIU; Yun He SHENG

    2014-01-01

    In this paper, we construct a category of short exact sequences of vector bundles and prove that it is equivalent to the category of double vector bundles. Moreover, operations on double vector bundles can be transferred to operations on the corresponding short exact sequences. In particular, we study the duality theory of double vector bundles in term of the corresponding short exact sequences. Examples including the jet bundle and the Atiyah algebroid are discussed.

  5. On Double Vector Bundles

    OpenAIRE

    Chen, Zhuo; Liu, Zhangju; Sheng, Yunhe

    2011-01-01

    In this paper, we construct a category of short exact sequences of vector bundles and prove that it is equivalent to the category of double vector bundles. Moreover, operations on double vector bundles can be transferred to operations on the corresponding short exact sequences. In particular, we study the duality theory of double vector bundles in term of the corresponding short exact sequences. Examples including the jet bundle and the Atiyah algebroid are discussed.

  6. Custodial vector model

    DEFF Research Database (Denmark)

    Becciolini, Diego; Franzosi, Diogo Buarque; Foadi, Roshan;

    2015-01-01

    We analyze the Large Hadron Collider (LHC) phenomenology of heavy vector resonances with a $SU(2)_L\\times SU(2)_R$ spectral global symmetry. This symmetry partially protects the electroweak S-parameter from large contributions of the vector resonances. The resulting custodial vector model spectrum...

  7. Custodial vector model

    DEFF Research Database (Denmark)

    Becciolini, Diego; Franzosi, Diogo Buarque; Foadi, Roshan

    2015-01-01

    We analyze the Large Hadron Collider (LHC) phenomenology of heavy vector resonances with a $SU(2)_L\\times SU(2)_R$ spectral global symmetry. This symmetry partially protects the electroweak S-parameter from large contributions of the vector resonances. The resulting custodial vector model spectrum...

  8. New Regularization Method in Electrical Impedance Tomography

    Institute of Scientific and Technical Information of China (English)

    侯卫东; 莫玉龙

    2002-01-01

    Image reconstruction in elecrical impedance tomography(EIT)is a highly ill-posed inverse problem,Regularization techniques must be used in order to solve the problem,In this paper,a new regularization method based on the spatial filtering theory is proposed.The new regularized reconstruction for EIT is independent of the estimation of impedance distribution,so it can be implemented more easily than the maxiumum a posteriori(MAP) method.The regularization level in our proposed method varies spatially so as to be suited to the correlation character of the object's impedance distribution.We implemented our regularization method with two dimensional computer simulations.The experimental results indicate that the quality of the reconstructed impedance images with the descibed regularization method based on spatial filtering theory is better than that with Tikhonov method.

  9. Impedance and collective effects in the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Gareyte, J. [European Organization for Nuclear Research, Geneva (Switzerland)

    1996-08-01

    After a review of the main LHC parameters, and a brief description of the RF and vacuum systems, the coupling impedances of the main machine elements are given, as well as the resulting thresholds for instabilities. (author)

  10. Wave impedance retrieving via Bloch modes analysis

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Ha, S.; Sukhorukov, A.;

    2011-01-01

    of the Bloch mode, respectively. Case studies prove that our ap-proach can determine material and wave effective parameters of lossy and lossless metamaterials. In some examples when the passivity is violated we made further analysis and showed that this is due to the failure of concept of impedance retrieving......-ciples violation, like antiresonance behaviour with Im(ε) mode analysis of periodic metamaterials to extract the dominating (fundamental) Bloch mode. Then it is possible to determine the Bloch and wave impedances by the surface and volume aver-aging of the electromagnetic field......The main bottleneck in the restoration of electromagnetic effective parameters is connected to the impedance retrieving. The S-parameters method gives the input (Bloch) impedance, which, being then used for permittivity and permeability determination, causes some fundamental physics prin...

  11. Thermal Impedance of Rectangular Microwave Oven Linings

    Institute of Scientific and Technical Information of China (English)

    SHIShang-zhao; XUFu-qiu; 等

    1996-01-01

    Amodel was preseted for calcultaing the thermal impedance of the insulation and refractory linings of rectangular microwave ovens,of which the oven cavity's dimensions are relatively small,while the linings re relatively thick.

  12. A Rotative Electrical Impedance Tomography Reconstruction System

    Energy Technology Data Exchange (ETDEWEB)

    Yu, F-M [St. John' s and St. Mary' s Institute of Technology, Department of computer science and information Engineering, 499, Sec. 4, Tam King Road Tamsui, Taipei, Taiwan (China); Huang, C-N [National Central University, Department of Electrical Engineering, No.300, Jungda Rd, Jhongli City, 320 Taoyuan, Taiwan (China); Chang, F-W [National Central University, Department of Electrical Engineering, No.300, Jungda Rd, Jhongli City, 320 Taoyuan, Taiwan (China); Chung, H-Y [National Central University, Department of Electrical Engineering, No.300, Jungda Rd, Jhongli City, 320 Taoyuan, Taiwan (China)

    2006-10-15

    Electrical impedance tomography (EIT) is a powerful tool for mapping the conductivity distribution of estimated objects. The EIT system is entirely implemented by electrical technique, so it is a relatively cheap system and data can be collected very rapidly. But it has few commercially medical EIT systems available. This is because impedance image unable to achieve the essential spatial resolution and this technique has an intrinsically poor signal to noise ratio. In this paper, we have developed a high performance rotative EIT system (REIT) for expanding the independent measurements. By rotate the electrodes successive, REIT could change the position of electrodes and acquire more measurement data. This rotative measurement method not only can increase the resolution of impedance images, but also reduce the complexity of measurement system. We hope the improvement of REIT will bring some help in electrical impedance tomography.

  13. Modeling degradation in SOEC impedance spectra

    DEFF Research Database (Denmark)

    Jensen, Søren Højgaard; Hauch, Anne; Knibbe, Ruth;

    2013-01-01

    Solid oxide cell (SOC) performance is limited by various processes. One way to investigate these processes is by electrochemical impedance spectroscopy. In order to quantify and characterize the processes, an equivalent circuit can be used to model the SOC impedance spectra (IS). Unfortunately......, the optimal equivalent circuit is often unknown and to complicate matters further, several processes contribute to the SOC impedance - making detailed process characterization difficult. In this work we analyze and model a series of IS measured during steam electrolysis operation of an SOC. During testing......, degradation is only observed in the Ni/YSZ electrode and not in the electrolyte or the LSM/YSZ electrode. A batch fit of the differences between the IS shows that a modified Gerischer element provides a better fit to the Ni/YSZ electrode impedance than the frequently used RQ element - albeit neither...

  14. Analysis of impedance measurements of a suspension of microcapsules using a variable length impedance measurement cell

    Directory of Open Access Journals (Sweden)

    Dejan Krizaj

    2012-10-01

    Full Text Available Electrical impedance measurements of the suspensions have to take into account the double layer impedance that is due to a very thin charged layer formed at the electrode-electrolite interface. A dedicated measuring cell that enables variation of the distance between the electrodes was developed for investigation of electrical properties of suspensions using two electrode impedance measurements. By varying the distance between the electrodes it is possible to separate the double layer and the suspension impedance from the measured data. From measured and extracted impedances electrical lumped models have been developed. The error of non inclusion of the double layer impedance has been analyzed. The error depends on the frequency of the measurements as well as on the distance between the electrodes.

  15. Effect of shear on duct wall impedance.

    Science.gov (United States)

    Goldstein, M.; Rice, E.

    1973-01-01

    The solution to the equation governing the propagation of sound in a uniform shear layer is expressed in terms of parabolic cylinder functions. This result is used to develop a closed-form solution for acoustic wall impedance which accounts for both the duct liner and the presence of a boundary layer in the duct. The effective wall impedance can then be used as the boundary condition for the much simpler problem of sound propagation in uniform flow.

  16. CSR Impedance for Non-Ultrarelativistic Beams

    Energy Technology Data Exchange (ETDEWEB)

    Li, Rui [Jefferson Lab., Newport News, VA (United States); Tsai, Cheng Y. [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Jefferson Lab., Newport News, VA (United States)

    2015-09-01

    For the analysis of the coherent synchrotron radiation (CSR)-induced microbunching gain in the low energy regime, such as when a high-brightness electron beam is transported through a low-energy merger in an energy-recovery linac (ERL) design, it is necessary to extend the CSR impedance expression in the ultrarelativistic limit to the non-ultrarelativistic regime. This paper presents our analysis of CSR impedance for general beam energies.

  17. Design of an impedance matching acoustic bend

    OpenAIRE

    Yang, Yuzhen; Jia, Han; Lu, Wenjia; Sun, Zhaoyong; Yang, Jun

    2017-01-01

    We propose the design of an impedance matching acoustic bend in this article. The bending structure is composed of sub-wavelength unit cells with perforated plates and side pipes, whose mass density and bulk modulus can be tuned simultaneously. So the refraction index and the impedance of the acoustic bend can be modulated simultaneously to guarantee both the bending effect and the high transmission. The simulation results of sound pressure field distribution show that the bending effect of t...

  18. Antenna impedance matching with neural networks.

    Science.gov (United States)

    Hemminger, Thomas L

    2005-10-01

    Impedance matching between transmission lines and antennas is an important and fundamental concept in electromagnetic theory. One definition of antenna impedance is the resistance and reactance seen at the antenna terminals or the ratio of electric to magnetic fields at the input. The primary intent of this paper is real-time compensation for changes in the driving point impedance of an antenna due to frequency deviations. In general, the driving point impedance of an antenna or antenna array is computed by numerical methods such as the method of moments or similar techniques. Some configurations do lend themselves to analytical solutions, which will be the primary focus of this work. This paper employs a neural control system to match antenna feed lines to two common antennas during frequency sweeps. In practice, impedance matching is performed off-line with Smith charts or relatively complex formulas but they rarely perform optimally over a large bandwidth. There have been very few attempts to compensate for matching errors while the transmission system is in operation and most techniques have been targeted to a relatively small range of frequencies. The approach proposed here employs three small neural networks to perform real-time impedance matching over a broad range of frequencies during transmitter operation. Double stub tuners are being explored in this paper but the approach can certainly be applied to other methodologies. The ultimate purpose of this work is the development of an inexpensive microcontroller-based system.

  19. Impedance Based Analysis and Design of Harmonic Resonant Controller for a Wide Range of Grid Impedance

    DEFF Research Database (Denmark)

    Kwon, Jun Bum; Wang, Xiongfei; Blaabjerg, Frede

    2014-01-01

    in the closed-loop output admittance of converter. Such negative resistances may interact with the grid impedance resulting in steady state error or unstable harmonic compensation. To deal with this problem, a design guideline for harmonic resonant controllers under a wide range of grid impedance is proposed......This paper investigates the effect of grid impedance variation on harmonic resonant current controllers for gridconnected voltage source converters by means of impedance-based analysis. It reveals that the negative harmonic resistances tend to be derived from harmonic resonant controllers...

  20. Electromagnetic Wave Scattering By the Coated Impedance Cylinder

    Directory of Open Access Journals (Sweden)

    V.I. Vyunnik

    2010-01-01

    Full Text Available In this work the boundary conditions for the impedance circular cylinder coated by a low contrast dielectric thin layer are derived. Expression for the reduced impedance of the cylinder is obtained. Conditions and applicability limits of the proposed approach are defined. Influence of the coating impedance on the reduced impedance of the cylinder is investigated.

  1. VISUALIZATION OF BIOLOGICAL TISSUE IMPEDANCE PARAMETERS

    Directory of Open Access Journals (Sweden)

    V. I. Bankov

    2016-01-01

    Full Text Available Objective. Investigation the opportunity for measurement of biological tissue impedance to visualize its parameters.Materials and methods. Studies were undertook on the experimental facility, consists of registrating measuring cell, constructed from flat inductors system, formed in oscillatory circuit, herewith investigated biological tissue is the part of this oscillatory circuit. An excitation of oscillatory circuit fulfilled by means of exciter inductor which forms impulse complex modulated electromagnetic field (ICM EMF. The measurement process and visualizations provided by set of certificated instruments: a digital oscillograph AKTAKOM ADS-2221MV, a digital generator АКТАКОМ AWG-4150 (both with software and a gauge RLC E7-22. Comparative dynamic studies of fixed volume and weight pig’s blood, adipose tissue, muscular tissue impedance were conducted by contact versus contactless methods. Contactless method in contrast to contact method gives opportunity to obtain the real morphological visualization of biological tissue irrespective of their nature.Results. Comparison of contact and contactless methods of impedance measurement shows that the inductance to capacitance ratio X(L / X(C was equal: 17 – for muscular tissue, 4 – for blood, 1 – for adipose tissue. It demonstrates the technical correspondence of both impedance registration methods. If propose the base relevance of X (L and X (C parameters for biological tissue impedance so contactless measurement method for sure shows insulating properties of adipose tissue and high conductivity for blood and muscular tissue in fixed volume-weight parameters. Registration of biological tissue impedance complex parameters by contactless method with the help of induced ICM EMF in fixed volume of biological tissue uncovers the most important informative volumes to characterize morphofunctional condition of biological tissue namely X (L / X (C.Conclusion. Contactless method of biological

  2. Analysis on electromagnetic scattering by a wedge with impedance faces under exact impedance boundary

    Institute of Scientific and Technical Information of China (English)

    吴良超; 汪茂光

    1995-01-01

    Under the exact impedance boundary condition (EIBC), by using wave equations and the longitudinal field method, the electromagnetic scattenng by an impedance wedge has been analysed in detail, following the Maliuzhinets approach, and the uniform diffraction coefficient of the diffracted field has been presented.

  3. Vector Soliton Fiber Lasers

    CERN Document Server

    Zhang, Han

    2011-01-01

    Solitons, as stable localized wave packets that can propagate long distance in dispersive media without changing their shapes, are ubiquitous in nonlinear physical systems. Since the first experimental realization of optical bright solitons in the anomalous dispersion single mode fibers (SMF) by Mollenauer et al. in 1980 and optical dark solitons in the normal dispersion SMFs by P. Emplit et al. in 1987, optical solitons in SMFs had been extensively investigated. In reality a SMF always supports two orthogonal polarization modes. Taking fiber birefringence into account, it was later theoretically predicted that various types of vector solitons, including the bright-bright vector solitons, dark-dark vector solitons and dark-bright vector solitons, could be formed in SMFs. However, except the bright-bright type of vector solitons, other types of vector solitons are so far lack of clear experimental evidence. Optical solitons have been observed not only in the SMFs but also in mode locked fiber lasers. It has be...

  4. Resonant impedance matchers for Mario Schenberg detector

    Energy Technology Data Exchange (ETDEWEB)

    Frajuca, Carlos; Bortoli, Fabio S. [Centro Federal de Educacao Tecnologica de Sao Paulo, SP (Brazil)

    2006-07-01

    'Mario Schenberg' is a spherical resonant-mass gravitational wave (GW) detector that will be part of a GW detection array of two detectors, the other one is been built in The Netherlands. Their resonant frequencies will be around 3.2 kHz with a bandwidth of about 200 Hz. This range of frequencies is new in a field where the typical frequencies lay below 1 kHz, making the transducer development much more complex. Some studies indicated that using low mass mechanical resonators (used for impedance matching to the parametric transducer, in a cold damping regime), allow the detector to reach the standard quantum limit. In this work we describe the study of mechanical impedance matcher resonators used to obtain a better coupling between the sphere and the transducers and keeping the same calibration for all transducers, this has been show to be not a easy task since the differential motions of the sphere surface propagates to the motions of the resonant mechanical impedance matchers, when it can be done then the next step is to calculate the effective mass of the resonating mechanical impedance matcher and then, calculate the detector sensitivity, this is also complicated because there is a spread in the resonant mechanical impedance matcher frequencies. (author)

  5. Resonant impedance of bellows above cutoff

    Energy Technology Data Exchange (ETDEWEB)

    Krinsky, S

    1980-01-01

    The perturbation method of Chatard-Moulin and Papiernik is used to calculate the longitudinal and transverse impedances, Z(..omega..) and Z/sub perpendicular/(..omega..), of a bellows. The bellows shape is defined by its radius a(z) = a (1 + epsilons(z)), where a is the mean radius, epsilon a small parameter, and s(z) describes the convolution of the bellows. A finite wall conductivity is considered and the resonant contribution to the impedance above the cutoff frequency of the unperturbed chamber is determined, obtaining analytic approximations to the resonant frequencies, quality factors, and shunt impedances. The relation Z/sub perpendicular/(..omega..) = (2c/a/sup 2/)Z(..omega..)/..omega.., of course, does not hold as an identity, but it is found to be a useful relation for the shunt impedances, holding exactly for one family of transverse modes and providing an upper bound on the shunt impedances of the second set of transverse modes.

  6. Development of three-dimension microelectrode array for bioelectric measurement using the liquidmetal-micromolding technique

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ran, E-mail: liuran@tsinghua.edu.cn; Yang, Xueyao; Chen, Weixing [Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084 (China); Jin, Cuiyun; Fu, Jingjing [College of Information Science and Technology, Beijing University of Chemical Technology, Beijing 100029 (China); Liu, Jing [Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084 (China); Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

    2013-11-04

    A method of manufacturing three-dimension microneedle electrode arrays is presented in this paper using the micromolding technology with liquid metal at room temperature, based on the physical property of the Bi-In-Sn liquid metal alloy, being its melting point especially low. Observed under scanning electron microscopy, the needle body of the electrode chip manufactured using this method has a good consistency. Skin penetration test in-vitro indicates that the microneedle electrode can pierce the stratum corneum and cross the high-impedance layer to acquire electrical signals. Electrical impedance and polarization voltage experimental results show that the electrode chips have great electric characteristics and meet the practical application demands.

  7. Vehicle Based Vector Sensor

    Science.gov (United States)

    2015-09-28

    300001 1 of 16 VEHICLE-BASED VECTOR SENSOR STATEMENT OF GOVERNMENT INTEREST [0001] The invention described herein may be manufactured and...unmanned underwater vehicle that can function as an acoustic vector sensor . (2) Description of the Prior Art [0004] It is known that a propagating...mechanics. An acoustic vector sensor measures the particle motion via an accelerometer and combines Attorney Docket No. 300001 2 of 16 the

  8. Implicit Real Vector Automata

    Directory of Open Access Journals (Sweden)

    Jean-François Degbomont

    2010-10-01

    Full Text Available This paper addresses the symbolic representation of non-convex real polyhedra, i.e., sets of real vectors satisfying arbitrary Boolean combinations of linear constraints. We develop an original data structure for representing such sets, based on an implicit and concise encoding of a known structure, the Real Vector Automaton. The resulting formalism provides a canonical representation of polyhedra, is closed under Boolean operators, and admits an efficient decision procedure for testing the membership of a vector.

  9. Vectors and their applications

    CERN Document Server

    Pettofrezzo, Anthony J

    2005-01-01

    Geared toward undergraduate students, this text illustrates the use of vectors as a mathematical tool in plane synthetic geometry, plane and spherical trigonometry, and analytic geometry of two- and three-dimensional space. Its rigorous development includes a complete treatment of the algebra of vectors in the first two chapters.Among the text's outstanding features are numbered definitions and theorems in the development of vector algebra, which appear in italics for easy reference. Most of the theorems include proofs, and coordinate position vectors receive an in-depth treatment. Key concept

  10. Complex Polynomial Vector Fields

    DEFF Research Database (Denmark)

    Dias, Kealey

    vector fields. Since the class of complex polynomial vector fields in the plane is natural to consider, it is remarkable that its study has only begun very recently. There are numerous fundamental questions that are still open, both in the general classification of these vector fields, the decomposition...... or meromorphic (allowing poles as singularities) functions. There already exists a well-developed theory for iterative holomorphic dynamical systems, and successful relations found between iteration theory and flows of vector fields have been one of the main motivations for the recent interest in holomorphic...

  11. Plasma Diagnostics by Antenna Impedance Measurements

    Science.gov (United States)

    Swenson, C. M.; Baker, K. D.; Pound, E.; Jensen, M. D.

    1993-01-01

    The impedance of an electrically short antenna immersed in a plasma provides an excellent in situ diagnostic tool for electron density and other plasma parameters. By electrically short we mean that the wavelength of the free-space electromagnetic wave that would be excited at the driving frequency is much longer than the physical size of the antenna. Probes using this impedance technique have had a long history with sounding rockets and satellites, stretching back to the early 1960s. This active technique could provide information on composition and temperature of plasmas for comet or planetary missions. Advantages of the impedance probe technique are discussed and two classes of instruments built and flown by SDL-USU for determining electron density (the capacitance and plasma frequency probes) are described.

  12. Impedance properties of circular microstrip antenna

    Science.gov (United States)

    Deshpande, M. D.; Bailey, M. C.

    1983-01-01

    A moment method solution to the input impedance of a circular microstrip antenna excited by either a microstrip feed or a coaxial probe is presented. Using the exact dyadic Green's function and the Fourier transform the problem is formulated in terms of Richmond's reaction integral equation from which the unknown patch current can be solved for. The patch current is expanded in terms of regular surface patch modes and an attachment mode (for probe excited case) which insures continuity of the current at probe/patch junction, proper polarization and p-dependance of patch current in the vicinity of the probe. The input impedance of a circular microstrip antenna is computed and compared with earlier results. Effect of attachment mode on the input impedance is also discussed.

  13. Impedance plethysmographic observations in thoracic outlet syndrome.

    Directory of Open Access Journals (Sweden)

    Nerurkar S

    1990-07-01

    Full Text Available Forty patients with symptoms of neuro-vascular compression in the upper extremities were subjected to impedance plethysmographic study using Parulkar′s method. Two patients recorded decreased blood flow (BFI in supine position and were diagnosed as having partial occlusion at subclavian level. Sixteen of the patients recorded decreased BFI on 90 degrees abduction and hyper-abduction. Twelve of these patients had radiological evidence of anomalous cervicle ribs. In remaining four patients extrinsic impression on the subclavian artery due to fibrous deposits was confirmed by arteriography. Remaining 22 patients recorded normal impedance plethysmograms. Impedance plethysmography thus provided a non-invasive modality for confirmation of vascular compression in thoracic outlet syndrome.

  14. Bench Measurements of Low Frequency Transverse Impedance

    CERN Document Server

    Caspers, Friedhelm; Mostacci, A

    2003-01-01

    For frequencies below 10 MHz the classical two wire transmission line method is subject to difficulties in sensitivity and measurement uncertainties. Thus for evaluation of the low frequency transverse impedance properties of the LHC dump kicker a modified version of the two wire transmission line has been used. It consists, in the present case, of a 10 turn loop of approximately 1 meter length and 2 cm width. The change of input impedance of the loop is measured as a function of the surroundings and by using a proper reference (metallic beampipe) these changes are converted into a meaningful transverse beam coupling impedance. Measurements of several calibration objects have shown close agreement with theoretical results.

  15. ac impedance of the carbon monofluoride electrode

    Science.gov (United States)

    Suchanski, M. R.

    1985-09-01

    The ac impedance of carbon monofluoride (CF) half-cells and Li/CF batteries that contain 1M LiBF4/4-butyrolactone electrolyte was measured as a function of state of charge. The nonfaradaic components of the CF half-cell impedance were resolved with the aid of a one-dimensional macroscopic treatment of a porous electrode. The values of the nonfaradaic components and their variation with charge withdrawn provide information concerning the nature of cathode discharge products, the degree of tortuosity in the cathode and separator matrices, and the cathode failure mechanism. The CF electrode capacitance, as measured by the low frequency quadrature impedance, can serve as a semiquantitative measure of battery state of charge under certain conditions.

  16. Wavelet analysis of the impedance cardiogram waveforms

    Science.gov (United States)

    Podtaev, S.; Stepanov, R.; Dumler, A.; Chugainov, S.; Tziberkin, K.

    2012-12-01

    Impedance cardiography has been used for diagnosing atrial and ventricular dysfunctions, valve disorders, aortic stenosis, and vascular diseases. Almost all the applications of impedance cardiography require determination of some of the characteristic points of the ICG waveform. The ICG waveform has a set of characteristic points known as A, B, E ((dZ/dt)max) X, Y, O and Z. These points are related to distinct physiological events in the cardiac cycle. Objective of this work is an approbation of a new method of processing and interpretation of the impedance cardiogram waveforms using wavelet analysis. A method of computer thoracic tetrapolar polyrheocardiography is used for hemodynamic registrations. Use of original wavelet differentiation algorithm allows combining filtration and calculation of the derivatives of rheocardiogram. The proposed approach can be used in clinical practice for early diagnostics of cardiovascular system remodelling in the course of different pathologies.

  17. Complex impedance studies of lithium iodine batteries

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, C.L.; Skarstad, P.M. (Promeon Division Medtronic, Inc. Minneapolis, MN (US))

    1990-08-01

    Complex impedance spectra of conductivity cells containing iodine/poly-2-vinylpyridine cathode material were taken by two- and four-probe techniques. The impedance spectra contain a current-independent bulk resistance in series with a current-dependent interfacial resistance. The current-dependent interfacial resistance has the characteristics expected of a charge-transfer resistance. Moreover, electronically blocked (lithium/lithium iodide) electrodes give the same result as non-blocked (stainless steel) electrodes. This is exactly what would be expected if the medium were an ionic conductor. Complex impedance spectra of lithium/iodine batteries show additional structure, as might be expected, but are consistent with results from the conductivity cells.

  18. Compact rat-race ring coupler with meander high-impedance transmission line and port impedance matching

    Directory of Open Access Journals (Sweden)

    Jun He

    2015-08-01

    Full Text Available A novel compact rat-race ring coupler with meander high-impedance transmission line and port impedance matching is presented in this Letter. First, a ring coupler with high port impedance is designed using meander lines. Secondly, an impedance matching section is designed to match the high port impedance to ordinary 50 Ω. The proposed coupler effectively reduces occupied area to 16.8% of conventional one. The design is validated both by simulation and measurement.

  19. Pumping slots: Coupling impedance calculations and estimates

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S.

    1993-08-01

    Coupling impedances of small pumping holes in vacuum-chamber walls have been calculated at low frequencies, i.e., for wavelengths large compared to a typical hole size, in terms of electric and magnetic polarizabilities of the hole. The polarizabilities can be found by solving and electro- or magnetostatic problem and are known analytically for the case of the elliptic shape of the hole in a thin wall. The present paper studies the case of pumping slots. Using results of numerical calculations and analytical approximations of polarizabilities, we give formulae for practically important estimates of slot contribution to low-frequency coupling impedances.

  20. On coupling impedances of pumping holes

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S.

    1993-04-01

    Coupling impedances of a single small hole in vacuum-chamber walls have been calculated at low frequencies. To generalize these results for higher frequencies and/or larger holes one needs to solve coupled integral equations for the effective currents. These equations are solved for two specific hole shapes. The effects of many holes at high frequencies where the impedances are not additive are studied using a perturbation-theory method. The periodic versus random distributions of the pumping holes in the Superconducting Super Collider liner are compared.

  1. Protein Aggregation Measurement through Electrical Impedance Spectroscopy

    Science.gov (United States)

    Affanni, A.; Corazza, A.; Esposito, G.; Fogolari, F.; Polano, M.

    2013-09-01

    The paper presents a novel methodology to measure the fibril formation in protein solutions. We designed a bench consisting of a sensor having interdigitated electrodes, a PDMS hermetic reservoir and an impedance meter automatically driven by calculator. The impedance data are interpolated with a lumped elements model and their change over time can provide information on the aggregation process. Encouraging results have been obtained by testing the methodology on K-casein, a protein of milk, with and without the addition of a drug inhibiting the aggregation. The amount of sample needed to perform this measurement is by far lower than the amount needed by fluorescence analysis.

  2. Electrochemical Impedance Spectroscopy Of Metal Alloys

    Science.gov (United States)

    Macdowell, L. G.; Calle, L. M.

    1993-01-01

    Report describes use of electrochemical impedance spectroscopy (EIS) to investigate resistances of 19 alloys to corrosion under conditions similar to those of corrosive, chloride-laden seaside environment of Space Transportation System launch site. Alloys investigated: Hastelloy C-4, C-22, C-276, and B-2; Inconel(R) 600, 625, and 825; Inco(R) G-3; Monel 400; Zirconium 702; Stainless Steel 304L, 304LN, 316L, 317L, and 904L; 20Cb-3; 7Mo+N; ES2205; and Ferralium 255. Results suggest electrochemical impedance spectroscopy used to predict corrosion performances of metal alloys.

  3. Impedance-matched cavity quantum memory

    CERN Document Server

    Afzelius, Mikael

    2010-01-01

    We consider an atomic frequency comb based quantum memory inside an asymmetric optical cavity. In this configuration it is possible to absorb the input light completely in a system with an effective optical depth of one, provided that the absorption per cavity round trip exactly matches the transmission of the coupling mirror ("impedance matching"). We show that the impedance matching results in a readout efficiency only limited by irreversible atomic dephasing, whose effect can be made very small in systems with large inhomogeneous broadening. Our proposal opens up an attractive route towards quantum memories with close to unit efficiency.

  4. Estimating the short-circuit impedance

    DEFF Research Database (Denmark)

    Nielsen, Arne Hejde; Pedersen, Knud Ole Helgesen; Poulsen, Niels Kjølstad

    1997-01-01

    and current are derived each period, and the short-circuit impedance is estimated from variations in these components created by load changes in the grid. Due to the noisy and dynamic grid with high harmonic distortion it is necessary to threat the calculated values statistical. This is done recursively...... through a RLS-algorithm. The algorithms have been tested and implemented on a PC at a 132 kV substation supplying a rolling mill. Knowing the short-circuit impedance gives the rolling mill an opportunity to adjust the arc furnace operation to keep flicker below a certain level. Therefore, the PC performs...

  5. [Spatio-Temporal Bioelectrical Brain Activity Organization during Reading Syntagmatic and Paradigmatic Collocations by Students with Different Foreign Language Proficiency].

    Science.gov (United States)

    Sokolova, L V; Cherkasova, A S

    2015-01-01

    Texts or words/pseudowords are often used as stimuli for human verbal activity research. Our study pays attention to decoding processes of grammatical constructions consisted of two-three words--collocations. Russian and English collocation sets without any narrative were presented to Russian-speaking students with different English language skill. Stimulus material had two types of collocations: paradigmatic and syntagmatic. 30 students (average age--20.4 ± 0.22) took part in the study, they were divided into two equal groups depending on their English language skill (linguists/nonlinguists). During reading brain bioelectrical activity of cortex has been registered from 12 electrodes in alfa-, beta-, theta-bands. Coherent function reflecting cooperation of different cortical areas during reading collocations has been analyzed. Increase of interhemispheric and diagonal connections while reading collocations in different languages in the group of students with low knowledge of foreign language testifies of importance of functional cooperation between the hemispheres. It has been found out that brain bioelectrical activity of students with good foreign language knowledge during reading of all collocation types in Russian and English is characterized by economization of nervous substrate resources compared to nonlinguists. Selective activation of certain cortical areas has also been observed (depending on the grammatical construction type) in nonlinguists group that is probably related to special decoding system which processes presented stimuli. Reading Russian paradigmatic constructions by nonlinguists entailed increase between left cortical areas, reading of English syntagmatic collocations--between right ones.

  6. The interplay between genetic and bioelectrical signaling permits a spatial regionalisation of membrane potentials in model multicellular ensembles.

    Science.gov (United States)

    Cervera, Javier; Meseguer, Salvador; Mafe, Salvador

    2016-10-12

    The single cell-centred approach emphasises ion channels as specific proteins that determine individual properties, disregarding their contribution to multicellular outcomes. We simulate the interplay between genetic and bioelectrical signals in non-excitable cells from the local single-cell level to the long range multicellular ensemble. The single-cell genetic regulation is based on mean-field kinetic equations involving the mRNA and protein concentrations. The transcription rate factor is assumed to depend on the absolute value of the cell potential, which is dictated by the voltage-gated cell ion channels and the intercellular gap junctions. The interplay between genetic and electrical signals may allow translating single-cell states into multicellular states which provide spatio-temporal information. The model results have clear implications for biological processes: (i) bioelectric signals can override slightly different genetic pre-patterns; (ii) ensembles of cells initially at the same potential can undergo an electrical regionalisation because of persistent genetic differences between adjacent spatial regions; and (iii) shifts in the normal cell electrical balance could trigger significant changes in the genetic regulation.

  7. MicroRNA Intercellular Transfer and Bioelectrical Regulation of Model Multicellular Ensembles by the Gap Junction Connectivity.

    Science.gov (United States)

    Cervera, Javier; Meseguer, Salvador; Mafe, Salvador

    2017-08-17

    We have studied theoretically the microRNA (miRNA) intercellular transfer through voltage-gated gap junctions in terms of a biophysically grounded system of coupled differential equations. Instead of modeling a specific system, we use a general approach describing the interplay between the genetic mechanisms and the single-cell electric potentials. The dynamics of the multicellular ensemble are simulated under different conditions including spatially inhomogeneous transcription rates and local intercellular transfer of miRNAs. These processes result in spatiotemporal changes of miRNA, mRNA, and ion channel protein concentrations that eventually modify the bioelectrical states of small multicellular domains because of the ensemble average nature of the electrical potential. The simulations allow a qualitative understanding of the context-dependent nature of the effects observed when specific signaling molecules are transferred through gap junctions. The results suggest that an efficient miRNA intercellular transfer could permit the spatiotemporal control of small cellular domains by the conversion of single-cell genetic and bioelectric states into multicellular states regulated by the gap junction interconnectivity.

  8. Bioelectricity production from wastewater treatment in dual chambered microbial fuel cell (MFC) using selectively enriched mixed microflora: Effect of catholyte.

    Science.gov (United States)

    Venkata Mohan, S; Saravanan, R; Raghavulu, S Veer; Mohanakrishna, G; Sarma, P N

    2008-02-01

    The performance of aerated and ferricyanide catholytes on the bioelectricity production was evaluated in dual chambered microbial fuel cell (MFC) (mediatroless anode; graphite electrodes) employing selectively enriched H(2) producing mixed consortia as anodic inoculum. Two MFCs with aerated catholyte (MFC(AC)) and ferricyanide catholyte (MFC(FC)) were operated separately to elucidate the difference in power generation potential and carbon removal efficiency under similar operating conditions [ambient pressure; room temperature (28+/-2 degrees C); acidophilic microenvironment (pH 6)]. The experimental data demonstrated the feasibility of in situ bioelectricity generation along with wastewater treatment. Effective power generation and substrate removal efficiency was documented in the fuel cell operated with ferricyanide catholyte (586 mV; 2.37 mA; 0.559 kg COD/m(3) day) than aerated catholyte (572 mV; 1.68 mA; 0.464 kg COD/m(3) day). Maximum power yield (0.635 W/kg COD(R) and 0.440 W/kg COD(R)) and current density (222.59 mA/m(2) and 190.28 mA/m(2)) was observed at 100 Omega resistor with ferricyanide and aerated catholytes, respectively. The study documented both wastewater treatment and electricity production through direct conversion of H(2) in a single system.

  9. Advancing vector biology research

    NARCIS (Netherlands)

    Kohl, Alain; Pondeville, Emilie; Schnettler, Esther; Crisanti, Andrea; Supparo, Clelia; Christophides, George K.; Kersey, Paul J.; Maslen, Gareth L.; Takken, Willem; Koenraadt, Constantianus J.M.; Oliva, Clelia F.; Busquets, Núria; Abad, F.X.; Failloux, Anna Bella; Levashina, Elena A.; Wilson, Anthony J.; Veronesi, Eva; Pichard, Maëlle; Arnaud Marsh, Sarah; Simard, Frédéric; Vernick, Kenneth D.

    2016-01-01

    Vector-borne pathogens impact public health, animal production, and animal welfare. Research on arthropod vectors such as mosquitoes, ticks, sandflies, and midges which transmit pathogens to humans and economically important animals is crucial for development of new control measures that target t

  10. Thorax mapping for localised lung impedance change using focused impedance measurement (FIM: A pilot study

    Directory of Open Access Journals (Sweden)

    Humayra Ferdous

    2013-12-01

    Full Text Available Focused Impedance Measurement (FIM is a technique where impedance can be measured with the optimum level of localization without much increase in complexity of measuring instrument. The electrodes are applied on the skin surface but the organs inside also contributes to the measurement, as the body is a volume conductor. In a healthy and disease free lung region, the air enters at breathe-in increases the impedance of the lung and impedance reduces during breathe-out. In contrast, for a diseased lung, where part of the lungs is filled with water or some fluid, air will not enter into this zone reducing impedance change between inspiration and expiration. With this idea, the current work had been executed to have general view of localised impedance change throughout thorax using 6-electrode FIM. This generated a matrix mapping from both the front and from the back of the thorax, which  afterwards provided that how impedance change due to ventilation varies from frontal plane to back plane of human bodies.

  11. Locating Impedance Change in Electrical Impedance Tomography Based on Multilevel BP Neural Network

    Institute of Scientific and Technical Information of China (English)

    彭源; 莫玉龙

    2003-01-01

    Electrical impedance tomography (EIT) is a new computer tomography technology, which reconstructs an impedance (resistivity, conductivity) distribution, or change of impedance, by making voltage and current measurements on the object's periphery.Image reconstruction in EIT is an ill-posed, non-linear inverse problem. A method for finding the place of impedance change in EIT is proposed in this paper, in which a multilevel BP neural network (MBPNN) is used to express the non-linear relation between theimpedance change inside the object and the voltage change measured on the surface of the object. Thus, the location of the impedance change can be decided by the measured voltage variation on the surface. The impedance change is then reconstructed using a linear approximate method. MBPNN can decide the impedance change location exactly without long training time. It alleviates some noise effects and can be expanded, ensuring high precision and space resolution of the reconstructed image that are not possible by using the back projection method.

  12. Complex Polynomial Vector Fields

    DEFF Research Database (Denmark)

    Dias, Kealey

    or meromorphic (allowing poles as singularities) functions. There already exists a well-developed theory for iterative holomorphic dynamical systems, and successful relations found between iteration theory and flows of vector fields have been one of the main motivations for the recent interest in holomorphic...... vector fields. Since the class of complex polynomial vector fields in the plane is natural to consider, it is remarkable that its study has only begun very recently. There are numerous fundamental questions that are still open, both in the general classification of these vector fields, the decomposition...... of parameter spaces into structurally stable domains, and a description of the bifurcations. For this reason, the talk will focus on these questions for complex polynomial vector fields....

  13. Complex Polynomial Vector Fields

    DEFF Research Database (Denmark)

    The two branches of dynamical systems, continuous and discrete, correspond to the study of differential equations (vector fields) and iteration of mappings respectively. In holomorphic dynamics, the systems studied are restricted to those described by holomorphic (complex analytic) functions...... vector fields. Since the class of complex polynomial vector fields in the plane is natural to consider, it is remarkable that its study has only begun very recently. There are numerous fundamental questions that are still open, both in the general classification of these vector fields, the decomposition...... of parameter spaces into structurally stable domains, and a description of the bifurcations. For this reason, the talk will focus on these questions for complex polynomial vector fields....

  14. Complex Polynomial Vector Fields

    DEFF Research Database (Denmark)

    Dias, Kealey

    The two branches of dynamical systems, continuous and discrete, correspond to the study of differential equations (vector fields) and iteration of mappings respectively. In holomorphic dynamics, the systems studied are restricted to those described by holomorphic (complex analytic) functions...... or meromorphic (allowing poles as singularities) functions. There already exists a well-developed theory for iterative holomorphic dynamical systems, and successful relations found between iteration theory and flows of vector fields have been one of the main motivations for the recent interest in holomorphic...... vector fields. Since the class of complex polynomial vector fields in the plane is natural to consider, it is remarkable that its study has only begun very recently. There are numerous fundamental questions that are still open, both in the general classification of these vector fields, the decomposition...

  15. Electrical Impedance Tomography Technology (EITT) Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J.

    2014-01-01

    Development of a portable, lightweight device providing two-dimensional tomographic imaging of the human body using impedance mapping. This technology can be developed to evaluate health risks and provide appropriate medical care on the ISS, during space travel and on the ground.

  16. Estimating the short-circuit impedance

    DEFF Research Database (Denmark)

    Nielsen, Arne Hejde; Pedersen, Knud Ole Helgesen; Poulsen, Niels Kjølstad

    1997-01-01

    through a RLS-algorithm. The algorithms have been tested and implemented on a PC at a 132 kV substation supplying a rolling mill. Knowing the short-circuit impedance gives the rolling mill an opportunity to adjust the arc furnace operation to keep flicker below a certain level. Therefore, the PC performs...

  17. Measuring mechanical impedance in clayey gravelly soils

    Directory of Open Access Journals (Sweden)

    R. Stolf

    1998-06-01

    Full Text Available Mechanical impedance of clayey and gravelly soils is often needed to interpret experimental results from tillage and other field experiments. Its measurement is difficult with manual and hydraulic penetrometers, which often bend or break in such soils. The purpose of this study was to evaluate the feasibility of a hand-operated "Stolf" impact penetrometer to measure mechanical impedance (soil resistance. The research was conducted in Raleigh, North Carolina, USA (35º 45'N, 78º 42'W, elevation 75 m. Corn was planted on April 19, 1991. Penetrometer measurements were taken on May 10, 1991, in 5 cm intervals to 60 cm at 33 locations on a transect perpendicular to the corn rows in each of four tillage treatments. The data permitted three-dimensional displays showing how mechanical impedance changed with depth and distance along the transect. The impact penetrometer proved to be a useful tool to collect quantitative mechanical impedance data on "hard" clayey and/or gravelly soils which previously were difficult to reliably quantify.

  18. High Impedance Comparator for Monitoring Water Resistivity.

    Science.gov (United States)

    Holewinski, Paul K.

    1984-01-01

    A high-impedance comparator suitable for monitoring the resistivity of a deionized or distilled water line supplying water in the 50 Kohm/cm-2 Mohm/cm range is described. Includes information on required circuits (with diagrams), sensor probe assembly, and calibration techniques. (JN)

  19. Quadratic Boost A-Source Impedance Network

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Blaabjerg, Frede; Chub, Andrii

    2016-01-01

    A novel quadratic boost type A-source impedance network is proposed in this paper for realizing converters that demand a very high voltage gain. To achieve that, the proposed network uses an auto-transformer, whose obtained gain is quadratically dependent on the duty ratio and is presently not ma...

  20. Electrical Impedance Tomography of Breast Cancer

    Science.gov (United States)

    2005-06-01

    Impedance Scanning; OPAMP , Operational Amplifier; SVD, Singular Value Decomposition; NEX, Number of Excitations; CE-MRI, Contrast Enhanced MRI. 599 600...the Poisson’s built using three LM741 OPAMP circuits to convert the volt- equation with Neumann boundary value conditions. This age from the signal

  1. Impedance-matched drilling telemetry system

    Science.gov (United States)

    Normann, Randy A.; Mansure, Arthur J.

    2008-04-22

    A downhole telemetry system that uses inductance or capacitance as a mode through which signal is communicated across joints between assembled lengths of pipe wherein efficiency of signal propagation through a drill string, for example, over multiple successive pipe segments is enhanced through matching impedances associated with the various telemetry system components.

  2. Surface impedance and the Casimir force

    CERN Document Server

    Bezerra, V B; Romero, C

    2002-01-01

    The impedance boundary condition is used to calculate the Casimir force in configurations of two parallel plates and a shpere (spherical lens) above a plate at both zero and nonzero temperature. The impedance approach allows one to find the Casimir force between the realistic test bodies regardless of the electromagnetic fluctuations inside the media. Although this approach is an approximate one, it has wider areas of application than the Lifshitz theory of the Casimir force. The general formulas of the impedance approach to the theory of the Casimir force are given and the formal substitution is found for connecting it with the Lifshitz formula. The range of micrometer separations between the test bodies which is interesting from the experimental point of view is investigated in detail. It is shown that at zero temperature the results obtained on the basis of the surface impedance method are in agreement with those obtained in framework of the Lifshitz theory within a fraction of a percent. The temperature c...

  3. Impedance Control of a Redundant Parallel Manipulator

    DEFF Research Database (Denmark)

    Méndez, Juan de Dios Flores; Schiøler, Henrik; Madsen, Ole

    2017-01-01

    This paper presents the design of Impedance Control to a redundantly actuated Parallel Kinematic Manipulator. The proposed control is based on treating each limb as a single system and their connection through the internal interaction forces. The controller introduces a stiffness and damping matr...

  4. Online contact impedance identification for robotic systems

    NARCIS (Netherlands)

    Haddadi, Amir; Hashtrudi-Zaad, Keyvan

    2008-01-01

    In this paper, we study the performance of various algorithms for fast online identification of environment impedance during robotic contact tasks. In particular, we evaluate and compare algorithms with regard to their convergence rate, computational complexity and sensitivity to noise for different

  5. Small-signal Loudspeaker Impedance Emulator

    DEFF Research Database (Denmark)

    Knott, Arnold; Iversen, Niels Elkjær

    2014-01-01

    Specifying the performance of audio ampliers is typically done by playing sine waves into a pure ohmic load. However real loudspeaker impedances are not purely ohmic but characterised by the mechanical resonance between the mass of the diaphragm and the compliance of its' suspension which vary fr...

  6. Wave impedance retrieving via Bloch modes analysis

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Ha, S.; Sukhorukov, A.

    2011-01-01

    of the Bloch mode, respectively. Case studies prove that our ap-proach can determine material and wave effective parameters of lossy and lossless metamaterials. In some examples when the passivity is violated we made further analysis and showed that this is due to the failure of concept of impedance retrieving...

  7. Impedance and collective effects in the KEKB

    Energy Technology Data Exchange (ETDEWEB)

    Chin, Yongho [National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan); Oide, Katsunobu

    1996-08-01

    This paper focuses on beam instabilities due to single-beam collective effects, impedances from various beamline elements, ion trapping, photo-electrons, and other issues in the KEKB. We will also discuss the power deposition generated by a beam in the form of the Higher-Order-Mode (HOM) losses by interacting with its surroundings. (author)

  8. Microwave transmission-line impedance data

    CERN Document Server

    Gunston, M A R

    1996-01-01

    A compendium of data for computing the characteristic impedance of transmission lines based on physical dimensions. Covers both conventional structures and unusual geometries, including coaxial, eccentric and elliptic coaxial, twin-wire, wire-above-ground, microstrip and derivatives, stripline, slabline and trough line. Also details numerous configurations of coupled lines.

  9. Impedance matching between ventricle and load.

    Science.gov (United States)

    Piene, H

    1984-01-01

    Impedance matching in the cardiovascular system is discussed in light of two models of ventricle and load: a Thevenin equivalent consisting of a hydromotive pressure source and an internal, source resistance and compliance in parallel; and a time-varying compliance filled from a constant pressure source and ejecting into a load of three components, a central resistor, a compliance, and a peripheral resistance. According to the Thevenin analog, the energy source and the load are matched when the load resistance is T/t times the internal source resistance (T is total cycle length, t is systolic time interval). Both from this model and from the variable compliance model it appears that optimum matching between source and load depends on the compliance of the Windkessel, as low compliance shifts the matching load resistance to a low value. Animal experiments (isolated cat hearts) indicated that both left and right ventricles at normal loads work close to their maxima of output hydraulic power, and, according to experiments in the right ventricle, maximum power output is related to load resistance and compliance as predicted by the above models. From an experimentally determined relationship among instantaneous ventricular pressure and volume (right ventricle of isolated cat hearts), an optimum load impedance was calculated on the basis of the assumption that the ratio between stroke work and static, potential energy developed in the ventricular cavity is maximum. The optimum load impedance found by this procedure closely resembles the normal input impedance of the cat lung vessel bed.

  10. Loudspeaker impedance emulator for multi resonant systems

    DEFF Research Database (Denmark)

    Iversen, Niels Elkjær; Knott, Arnold

    2015-01-01

    Specifying the performance of audio amplifiers is typically done by playing sine waves into a pure ohmic load. However real loudspeaker impedances are not purely ohmic but characterised by its electrical, mechanical and acoustical properties. Therefore a loudspeaker emulator capable of adjusting...

  11. A study on calculation method for mechanical impedance of air spring

    Science.gov (United States)

    Changgeng, SHUAI; Penghui, LI; Rustighi, Emiliano

    2016-09-01

    This paper proposes an approximate analytic method of obtaining the mechanical impedance of air spring. The sound pressure distribution in cylindrical air spring is calculated based on the linear air wave theory. The influences of different boundary conditions on the acoustic pressure field distribution in cylindrical air spring are analysed. A 1-order ordinary differential matrix equation for the state vector of revolutionary shells under internal pressure is derived based on the non-moment theory of elastic thin shell. Referring to the transfer matrix method, a kind of expanded homogeneous capacity high precision integration method is introduced to solve the non-homogeneous matrix differential equation. Combined the solved stress field of shell with the calculated sound pressure field in air spring under the displacement harmonic excitation, the approximate analytical expression of the input and transfer mechanical impedance for the air spring can be achieved. The numerical simulation with the Comsol Multiphysics software verifies the correctness of theoretical analysis result.

  12. Beam measurements of the LHC impedance and validation of the impedance model

    CERN Document Server

    Esteban Müller, J F; Bohl, T; Mounet, N; Shaposhnikova, E; Timko, H

    2014-01-01

    Different measurements of the longitudinal impedance of the LHC done with single bunches with various intensities and longitudinal emittances during measurement sessions in 2011-2012 are compared with particle simulations based on the existing LHC impedance model. The very low reactive impedance of the LHC, with Im Z=n = 0.08, is not easy to measure. The most sensitive observation is the loss of Landau damping, which shows at which energy bunches become unstable depending on their parameters. In addition, the synchrotron frequency shift due to the reactive impedance was estimated following two methods. Firstly, it was obtained from the peak-detected Schottky spectrum. Secondly, a sine modulation in the RF phase was applied to the bunches of different intensities and the modulation frequency was scanned. In both cases, the synchrotron frequency shift was of the order of the measurement precision.

  13. Dynamic electrochemical impedance spectroscopy reconstructed from continuous impedance measurement of single frequency during charging/discharging

    Science.gov (United States)

    Huang, Jun; Li, Zhe; Zhang, Jianbo

    2015-01-01

    In this study, a novel implementation of dynamic electrochemical impedance spectroscopy (DEIS) is proposed. The method first measures the impedance continuously at a single frequency during one charging/discharging cycle, then repeats the measurement at a number of other selected frequencies. The impedance spectrum at a specific SOC is obtained by interpolating and collecting the impedance at all of the selected frequencies. The charge transfer resistance, Rct, from the DEIS is smaller than that from the steady EIS in a wide state-of-charge (SOC) range from 0.4 to 1.0, the Rct during charging is generally smaller than that during discharging for the battery chemistry used in this study.

  14. Radio frequency current-voltage probe for impedance and power measurements in multi-frequency unmatched loads

    Science.gov (United States)

    Lafleur, T.; Delattre, P. A.; Booth, J. P.; Johnson, E. V.; Dine, S.

    2013-01-01

    A broad-band, inline current-voltage probe, with a characteristic impedance of 50 Ω, is presented for the measurement of voltage and current waveforms, impedance, and power in rf systems. The probe, which uses capacitive and inductive sensors to determine the voltage and current, respectively, can be used for the measurement of single or multi-frequency signals into both matched and unmatched loads, over a frequency range of about 1-100 MHz. The probe calibration and impedance/power measurement technique are described in detail, and the calibrated probe results are compared with those obtained from a vector network analyzer and other commercial power meters. Use of the probe is demonstrated with the measurement of power into an unmatched capacitively coupled plasma excited by multi-frequency tailored voltage waveforms.

  15. Radio frequency current-voltage probe for impedance and power measurements in multi-frequency unmatched loads.

    Science.gov (United States)

    Lafleur, T; Delattre, P A; Booth, J P; Johnson, E V; Dine, S

    2013-01-01

    A broad-band, inline current-voltage probe, with a characteristic impedance of 50 Ω, is presented for the measurement of voltage and current waveforms, impedance, and power in rf systems. The probe, which uses capacitive and inductive sensors to determine the voltage and current, respectively, can be used for the measurement of single or multi-frequency signals into both matched and unmatched loads, over a frequency range of about 1-100 MHz. The probe calibration and impedance/power measurement technique are described in detail, and the calibrated probe results are compared with those obtained from a vector network analyzer and other commercial power meters. Use of the probe is demonstrated with the measurement of power into an unmatched capacitively coupled plasma excited by multi-frequency tailored voltage waveforms.

  16. ON VECTOR NETWORK EQUILIBRIUM PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    Guangya CHEN

    2005-01-01

    In this paper we define a concept of weak equilibrium for vector network equilibrium problems.We obtain sufficient conditions of weak equilibrium points and establish relation with vector network equilibrium problems and vector variational inequalities.

  17. Vectorizing and macrotasking Monte Carlo neutral particle algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Heifetz, D.B.

    1987-04-01

    Monte Carlo algorithms for computing neutral particle transport in plasmas have been vectorized and macrotasked. The techniques used are directly applicable to Monte Carlo calculations of neutron and photon transport, and Monte Carlo integration schemes in general. A highly vectorized code was achieved by calculating test flight trajectories in loops over arrays of flight data, isolating the conditional branches to as few a number of loops as possible. A number of solutions are discussed to the problem of gaps appearing in the arrays due to completed flights, which impede vectorization. A simple and effective implementation of macrotasking is achieved by dividing the calculation of the test flight profile among several processors. A tree of random numbers is used to ensure reproducible results. The additional memory required for each task may preclude using a larger number of tasks. In future machines, the limit of macrotasking may be possible, with each test flight, and split test flight, being a separate task.

  18. Concentric artificial impedance surface for directional sound beamforming

    Science.gov (United States)

    Song, Kyungjun; Anzan-Uz-Zaman, Md.; Kwak, Jun-Hyuk; Jung, Joo-Yun; Kim, Jedo; Hur, Shin

    2017-03-01

    Utilizing acoustic metasurfaces consisting of subwavelength resonant textures, we design an artificial impedance surface by creating a new boundary condition. We demonstrate a circular artificial impedance surface with surface impedance modulation for directional sound beamforming in three-dimensional space. This artificial impedance surface is implemented by revolving two-dimensional Helmholtz resonators with varying internal coiled path. Physically, the textured surface has inductive surface impedance on its inner circular patterns and capacitive surface impedance on its outer circular patterns. Directional receive beamforming can be achieved using an omnidirectional microphone located at the focal point formed by the gradient-impeding surface. In addition, the uniaxial surface impedance patterning inside the circular aperture can be used for steering the direction of the main lobe of the radiation pattern.

  19. Scattering by a groove in an impedance plane

    Science.gov (United States)

    Bindiganavale, Sunil; Volakis, John L.

    1993-09-01

    An analysis of two-dimensional scattering from a narrow groove in an impedance plane is presented. The groove is represented by a impedance surface and the problem reduces to that of scattering from an impedance strip in an otherwise uniform impedance plane. On the basis of this model, appropriate integral equations are constructed using a form of the impedance plane Green's functions involving rapidly convergent integrals. The integral equations are solved by introducing a single basis representation of the equivalent current on the narrow impedance insert. Both transverse electric (TE) and transverse magnetic (TM) polarizations are treated. The resulting solution is validated by comparison with results from the standard boundary integral method (BIM) and a high frequency solution. It is found that the presented solution for narrow impedance inserts can be used in conjunction with the high frequency solution for the characterization of impedance inserts of any given width.

  20. Electrochemical Impedance of Ethanol Oxidation in Alkaline Media

    Institute of Scientific and Technical Information of China (English)

    DANAEE Iman; JAFARIAN Majid; GOBAL Fereydoon; SHARAFI Mahboobeh; MAHJANI Mohammad-ghasem

    2012-01-01

    Nickel modified NiOOH electrodes were used for the electrocatalytic oxidation of ethanol in alkaline solutions.The electro-oxidation of ethanol in a 1 mol/L NaOH solution at different concentrations of ethanol was studied by ac impedance spectroscopy.Electrooxidation of ethanol on Ni shows negative resistance on impedance plots.The impedance shows different patterns at different applied anodic potential.The influence of the electrode potential on impedance was studied and a quantitative explanation for the impedance of ethanol oxidation was given by means of a proposed mathematical model.At potentials higher than 0.52 V(vs.Ag/AgCl),a pseudoinductive behavior was observed,but at those higher than 0.57 V,impedance patterns were reversed to the second and third quadrants.The conditions required for the reversing of impedance pattern were delineated with the impedance model.

  1. Light composite vector bosons

    CERN Document Server

    Kosower, David A.

    1993-01-01

    In gauge theories with slowly-running coupling constants, it may be possible for four-fermion operators to be nearly marginal. Such operators can possess asymptotically weak couplings, and can plausibly give rise to light composite vector mesons.

  2. GAP Land Cover - Vector

    Data.gov (United States)

    Minnesota Department of Natural Resources — This vector dataset is a detailed (1-acre minimum), hierarchically organized vegetation cover map produced by computer classification of combined two-season pairs of...

  3. Tagged Vector Contour (TVC)

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Tagged Vector Contour (TVC) dataset consists of digitized contours from the 7.5 minute topographic quadrangle maps. Coverage for the state is incomplete....

  4. Vector Lattice Vortex Solitons

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-Dong; YE Fang-Wei; DONG Liang-Wei; LI Yong-Ping

    2005-01-01

    @@ Two-dimensional vector vortex solitons in harmonic optical lattices are investigated. The stability properties of such solitons are closely connected to the lattice depth Vo. For small Vo, vector vortex solitons with the total zero-angular momentum are more stable than those with the total nonzero-angular momentum, while for large Vo, this case is inversed. If Vo is large enough, both the types of such solitons are stable.

  5. Support vector machines applications

    CERN Document Server

    Guo, Guodong

    2014-01-01

    Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

  6. A Low-Frequency and Refinement Stable Impedance Boundary Condition EFIE

    CERN Document Server

    Dely, Alexandre; Cools, Kristof

    2016-01-01

    In this contribution, a discretisation of the IBC EFIE is introduced that (i) yields the correct solution at arbitrarily small frequencies, (ii) requires for its solution a number of matrix vector products bounded as the frequency tends to zero and as the mesh density increases. The low frequency stabilisation is based on a projector-based discrete Helmholtz splitting, rescaling, and recombination that depends on the low frequency behaviour of both the EFIE operator and the surface impedance condition. The dense mesh stabilisation is a modifcation of the Perfect Electric Conductor operator preconditioning approach taking into account the effect on the singular value spectrum of the IBC term.

  7. The Vector Curvaton

    CERN Document Server

    Navarro, Andres A

    2013-01-01

    We analyze a massive vector field with a non-canonical kinetic term in the action, minimally coupled to gravity, where the mass and kinetic function of the vector field vary as functions of time during inflation. The vector field is introduced following the same idea of a scalar curvaton, which must not affect the inflationary dynamics since its energy density during inflation is negligible compared to the total energy density in the Universe. Using this hypothesis, the vector curvaton will be solely responsible for generating the primordial curvature perturbation \\zeta. We have found that the spectra of the vector field perturbations are scale-invariant in superhorizon scales due to the suitable choice of the time dependence of the kinetic function and the effective mass during inflation. The preferred direction, generated by the vector field, makes the spectrum of \\zeta depend on the wavevector, i.e. there exists statistical anisotropy in \\zeta. This is discussed principally in the case where the mass of th...

  8. Current injection electrodes for electrical impedance tomography.

    Science.gov (United States)

    Armstrong, S; Jennings, D

    2004-08-01

    Current conveyors have been identified as a possible component within the current injection electrodes of an electrical impedance tomography system, where accurate current generation or precise measurement of the current injected is required. Several circuit configurations have been investigated through simulation to determine the most suitable to meet the specifications of the EIT system. A bipolar (floating source) circuit configuration employing the use of current conveyors has been designed, which achieves greater than 12 mA output current without saturation, over an accepted body impedance range. Simulations were performed over frequencies in excess of 1 MHz, and the output phase shift was less than 0.15 degrees up to 250 kHz, and 0.6 degrees up to 1 MHz.

  9. FEM electrode refinement for electrical impedance tomography.

    Science.gov (United States)

    Grychtol, Bartlomiej; Adler, Andy

    2013-01-01

    Electrical Impedance Tomography (EIT) reconstructs images of electrical tissue properties within a body from electrical transfer impedance measurements at surface electrodes. Reconstruction of EIT images requires the solution of an inverse problem in soft field tomography, where a sensitivity matrix, J, of the relationship between internal changes and measurements is calculated, and then a pseudo-inverse of J is used to update the image estimate. It is therefore clear that a precise calculation of J is required for solution accuracy. Since it is generally not possible to use analytic solutions, the finite element method (FEM) is typically used. It has generally been recommended in the EIT literature that FEMs be refined near electrodes, since the electric field and sensitivity is largest there. In this paper we analyze the accuracy requirement for FEM refinement near electrodes in EIT and describe a technique to refine arbitrary FEMs.

  10. Microwave impedance imaging on semiconductor memory devices

    Science.gov (United States)

    Kundhikanjana, Worasom; Lai, Keji; Yang, Yongliang; Kelly, Michael; Shen, Zhi-Xun

    2011-03-01

    Microwave impedance microscopy (MIM) maps out the real and imaginary components of the tip-sample impedance, from which the local conductivity and dielectric constant distribution can be derived. The stray field contribution is minimized in our shielded cantilever design, enabling quantitative analysis of nano-materials and device structures. We demonstrate here that the MIM can spatially resolve the conductivity variation in a dynamic random access memory (DRAM) sample. With DC or low-frequency AC bias applied to the tip, contrast between n-doped and p-doped regions in the dC/dV images is observed, and p-n junctions are highlighted in the dR/dV images. The results can be directly compared with data taken by scanning capacitance microscope (SCM), which uses unshielded cantilevers and resonant electronics, and the MIM reveals more information of the local dopant concentration than SCM.

  11. The electrochemical impedance of metal hydride electrodes

    DEFF Research Database (Denmark)

    Valøen, Lars Ole; Lasia, Andrzej; Jensen, Jens Oluf

    2002-01-01

    The electrochemical impedance responses for different laboratory type metal hydride electrodes were successfully modeled and fitted to experimental data for AB5 type hydrogen storage alloys as well as one MgNi type electrode. The models fitted the experimental data remarkably well. Several AC......, explaining the experimental impedances in a wide frequency range for electrodes of hydride forming materials mixed with copper powder, were obtained. Both charge transfer and spherical diffusion of hydrogen in the particles are important sub processes that govern the total rate of the electrochemical...... hydrogen absorption/desorption reaction. To approximate the experimental data, equations describing the current distribution in porous electrodes were needed. Indications of one or more parallel reduction/oxidation processes competing with the electrochemical hydrogen absorption/desorption reaction were...

  12. Estimating the Transverse Impedance in the Fermilab Recycler

    Energy Technology Data Exchange (ETDEWEB)

    Ainsworth, Robert [Fermilab; Adamson, Philip [Fermilab; Burov, Alexey [Fermilab; Kourbanis, Ioanis [Fermilab; Yang, Ming-Jen [Fermilab

    2016-06-01

    Impedance could represent a limitation of running high intensity bunches in the Fermilab recycler. With high intensity upgrades foreseen, it is important to quantify the impedance. To do this, studies have been performed measuring the tune shift as a function of bunch intensity allowing the transverse impedance to be derived.

  13. PHEMT Distributed Power Amplifier Adopting Broadband Impedance Transformer

    DEFF Research Database (Denmark)

    Narendra, K.; Limiti, E.; Paoloni, C.

    2013-01-01

    A non-uniform drain line distributed power amplifier (DPA) employing a broadband impedance transformer is presented. The DPA is based on GaAs PHEMT technology. The impedance transformer employs asymmetric coupled lines and transforms a low output impedance of the amplifier to a standard 50 Ω...

  14. Analog Video Line Driver with Adaptive Impedance Matching

    NARCIS (Netherlands)

    Nauta, Bram; Dijkstra, Marcel B.

    1998-01-01

    A new principle for an adaptive line driver is presented. This type of line driver can adapt its output impedance automatically to the applied load. This results in automatically corrected output impedance for different cables with terminations. Also, the line-driver output impedance becomes insensi

  15. Effect of rib-cage structure on acoustic chest impedance

    DEFF Research Database (Denmark)

    Zimmermann, Niels Henrik; Møller, Henrik; Hansen, John

    2011-01-01

    even weak sounds originating from e.g. the heart. The acoustic impedance is influenced by the structure of the ribcage; hence the acoustic impedance will change depending on if the coupler has been placed on a top of a rib or between the ribs (the intercostal). The impedance of the chest is measured...

  16. 食蚊鱼的生物电场特征%THE BIOELECTRIC FIELD OF GAMBUSIA AFFINIS

    Institute of Scientific and Technical Information of China (English)

    张旭光; 宋佳坤; 张国胜; 范纯新; 郭弘艺; 王晓杰

    2011-01-01

    Sturgeon is an ancestor electrosensory fish which is able to sense the electric fields of prey animals and other sources. The character of bioelectric fields in environment is an important stimulus to investigate the electrosensory information processing in the brain. However, there were a few documents on bioelectric fields. In this study, the bioelectric fields of Gambusia affinis were measured in living fish, which was used as prey fish of Siberian Sturgeon in laboratory and the common small fish in southern China. They were measured and charactered in three experimental groups: single fish group, pair in same direction group and pair in opposite direction group. The bioelectric field of single fish showed typical features of dipole field, with relative potential up to (-24±2.4) uV on head and (21 ±1.6) uV on tail. There was (4.2±0.8) uV alternating current electric with 1-3 Hz on head which was corresponded with the respiratory rhythm of the fish. In other two experimental groups, the direct current electric fields were larger than the single fish group (P<0.05). However, the alternating current electric field of single fish group was significant bigger than pair in opposite direction group (3.8±0.7) uV but smaller than pairs in same direction group (4.5±0.8) uV (P<0.01). It suggested that the schooling fish could evade the predators by modulating the alternating current respiratory potential. It was maybe a kind of ancestral anti-predator strategy for fish to meet the passive electroreception, and further research would carry on electrophysiology.%文章采用活体记录的方法测量了食蚊鱼(Gambusia affinis)的生物电场.实验分单尾鱼、两尾鱼同向和两尾鱼反向三组测量,每组10个重复.结果表明:单尾鱼的生物电场表现为头负、尾正的偶极子直流电场,头部相对电势为(-24±2.4)μ v,尾部为(21±1 6)μ v,且头部附近产生1-3 Hz与呼吸频率对应的交流呼吸电场,大小为(4.2±0.8)μV.两尾

  17. GHG emission factors for bioelectricity, biomethane, and bioethanol quantified for 24 biomass substrates with consequential life-cycle assessment

    DEFF Research Database (Denmark)

    Tonini, Davide; Hamelin, Lorie; Alvarado-Morales, Merlin

    2016-01-01

    Greenhouse gas (GHG) emission savings from biofuels dramatically depend upon the source of energy displaced and the effects induced outside the energy sector, for instance land-use changes (LUC). Using consequential life-cycle assessment and including LUC effects, this study provides GHG emission...... factors (EFs) for bioelectricity, biomethane, and bioethanol produced from twenty-four biomasses (from dedicated crops to residues of different origin) under a fossil and a non-fossil energy system. Accounting for numerous variations in the pathways, a total of 554 GHG EFs were quantified. The results...... showed that, important GHG savings were obtained with residues and seaweed, both under fossil and non-fossil energy systems. For high-yield perennial crops (e.g. willow and Miscanthus), GHG savings were achieved only under fossil energy systems. Biofuels from annual crops and residues that are today used...

  18. Integrative assessment of kick boxers’ brain blood circulation and bio-electrical activity in conditions of correction technologies’ application

    Directory of Open Access Journals (Sweden)

    Romanov Y.N.

    2016-06-01

    Full Text Available Purpose: to scientifically substantiate the role of para-vertebral impacts on blood circulation and bio-electrical activity of kick boxers’ cortex. Material: in the research participated kick boxers (main group, n=62 and university students (control group, n=25 of 18-23 years’ age. Assessment of para-vertebral impacts with device Armos and classic massage was fulfilled with the help of the following methodic: trans-cranial dopplerography of head main arteries and cortex EEG of the tested. Results: it was found that with the help of para-vertebral impacts by device Armos linear velocity of cerebral blood flow reduces to normal limits and in- and inter-hemispheres’ interaction strength increases. Conclusions: para-vertebral impacts by device Armos activate integrative processes and inter-hemispheres’ interactions of different cortex areas of kick boxers. It can witness about better formation of functional systems, ensuring sports efficiency.

  19. Summary of impedance issues and beam instabilities

    CERN Document Server

    Zimmermann, Frank

    2016-01-01

    This paper summarizes the session on impedance issues and beam instabilities at the ICFA workshop on future circular electron-positron factories “eeFACT2016” [1] held at the Cockcroft Institute, Daresbury, from 24 to 27 October 2016. This session also covered active beam stabilization by feedback systems. Beam-beam effects and coherent beambeam instabilities were addressed separately and, therefore, are not included here.

  20. Applications of Nonlinear Electrochemical Impedance Spectroscopy (NLEIS)

    KAUST Repository

    Adler, S. B.

    2013-08-31

    This paper reviews the use of nonlinear electrochemical impedance spectroscopy (NLEIS) in the analysis of SOFC electrode reactions. By combining EIS and NLEIS, as well as other independent information about an electrode material, it becomes possible to establish quantitative links between electrochemical kinetics and materials properties, even when systems are unstable with time. After a brief review of the method, this paper summarizes recent results analyzing the effects of Sr segregation in thin-film LSC electrodes. © The Electrochemical Society.