WorldWideScience

Sample records for biodiesel production technical

  1. Some Technical Aspects for Sustainable Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Imam Paryanto

    2013-01-01

    Full Text Available According to Brundtland Commission (1987, sustainability means the ability to meet the needs of the present without compromising the ability of future generations’ abilities to meet their own needs. The term of sustainability has multi-dimensional objectives of social, environmental and economic. Without ignoring the importance of social, environmental, and economical aspects of sustainability, this study will only highlight some technical aspects for sustainable biodiesel production and, of course, the final goal will target the implication of improved social, environmental and economical conditions. Some technical aspects for sustainable biodiesel production cover the multi-discipline activities at the design stage and at the operation stage of biodiesel production plant. The design stage can be divided into conceptual design, basic engineering design and detailed engineering design. At this stage, the design parameters should consider the selection of the type and availability of raw material, biodiesel plant capacity and location, the efficient production process, the availability of utilities and supporting infrastructures, waste (environmental treatment, and raw material and product handling facilities. And during the operation of biodiesel plant, some important technical issues are the production process activities according to the Standard Operating Procedure (SOP, awareness of safety and Hazard and Operability Study (HAZOP, scheduled maintenance activity, waste management, product quality control, and further, if possible, efficiency improvement in the production line through R&D activities and technological advances.

  2. Enzymatic biodiesel production: Technical and economical considerations

    DEFF Research Database (Denmark)

    Munk Nielsen, Per; Brask, Jesper; Fjerbæk, Lene

    2008-01-01

    It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial-scale biodiesel production. This is mainly due to non-optimized process design...... and a lack of available costeffective enzymes. The technology to re-use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates...... that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy....

  3. TECHNICAL REPORT 1: ANALYZING THE BIODIESEL PRODUCTION SYSTEM

    OpenAIRE

    DE BONI, Luis Alcides Brandini; GOLDANI, Eduardo

    2009-01-01

    The gradual increase in the productive chain of Biodiesel in Brazil comes requiring professionals enabled to its expansion and improvements. This fact is related to constants and increase demands of the biofuels, to attempt the percentages of mixture to diesel oil which will increase in the next years. In this way, this work compels comments of Tchê Química Group researchers, done in recent years, regarding the commercialized synthetic fuels fluid production like biodiesel. This material look...

  4. INNOVATIVE BIODIESEL PRODUCTION: A SOLUTION TO THE SCIENTIFIC, TECHNICAL, AND EDUCATIONAL CHALLENGES OF SUSTAINABILITY

    Science.gov (United States)

    Loyola's STEP students completed over 20 team projects: Developed a business plan for biodiesel production, created the LUC biodiesel website, created the Bio­shorts documentaries, tabled at environmental events, publicized and put on two Biodiesel Forums (2nd one pending,...

  5. Technical aspects of production and analysis of biodiesel from used cooking oil. A review

    Energy Technology Data Exchange (ETDEWEB)

    Enweremadu, C.C.; Mbarawa, M.M. [Department of Mechanical Engineering, Tshwane University of Technology, Private Bag X680, Pretoria 001 (South Africa)

    2009-12-15

    The increasing awareness of the depletion of fossil fuel resources and the environmental benefits of biodiesel fuel has made it more attractive in recent times. The cost of biodiesel, however, is the major hurdle to its commercialization in comparison to petroleum-based diesel fuel. The high cost is primarily due to the raw material, mostly neat vegetable oil. Used cooking oil is one of the economical sources for biodiesel production. However, the products formed during frying, can affect the transesterification reaction and the biodiesel properties. This paper attempts to review various technological methods of biodiesel production from used cooking oil. The analytical methods for high quality biodiesel fuel from used cooking oil like GC, TLC, HPLC, GPC and TGA have also been summarized in this paper. In addition, the specifications provided by different countries are presented. The fuel properties of biodiesel fuel from used cooking oil were also reviewed and compared with those of conventional diesel fuel. (author)

  6. Production of technical-grade sodium citrate from glycerol-containing biodiesel waste by Yarrowia lipolytica.

    Science.gov (United States)

    Kamzolova, Svetlana V; Vinokurova, Natalia G; Lunina, Julia N; Zelenkova, Nina F; Morgunov, Igor G

    2015-10-01

    The production of technical-grade sodium citrate from the glycerol-containing biodiesel waste by Yarrowia lipolytica was studied. Batch experiments showed that citrate was actively produced within 144 h, then citrate formation decreased presumably due to inhibition of enzymes involved in this process. In contrast, when the method of repeated batch cultivation was used, the formation of citrate continued for more than 500 h. In this case, the final concentration of citrate in the culture liquid reached 79-82 g/L. Trisodium citrate was isolated from the culture liquid filtrate by the addition of a small amount of NaOH, so that the pH of the filtrate increased to 7-8. This simple and economic isolation procedure gave the yield of crude preparation containing trisodium citrate 5.5-hydrate up to 82-86%.

  7. Final Technical Report on Development of an Economic and Efficient Biodiesel production Process (NC)

    Energy Technology Data Exchange (ETDEWEB)

    Tirla, Cornelia [Univ. of North Carolina, Pembroke, NC (United States); Dooling, Thomas A. [Univ. of North Carolina, Pembroke, NC (United States); Smith, Rachel B. [Univ. of North Carolina, Pembroke, NC (United States); Shi, Xinyan [Univ. of North Carolina, Pembroke, NC (United States); Shahbazi, Abolghasem [North Carolina Agricultural and Technical State Univ., Greensboro, NC (United States)

    2014-03-19

    The Biofuels Team at The University of North Carolina at Pembroke and North Carolina A&T State University carried out a joint research project aimed at developing an efficient process to produce biodiesel. In this project, the team developed and tested various types of homogeneous and heterogeneous catalysts which could replace the conventionally used soluble potassium hydroxide catalyst which, traditionally, must be separated and disposed of at the end of the process. As a result of this screening, the homogeneous catalyst choline hydroxide was identified as a potential replacement for the traditional catalyst used in this process, potassium hydroxide, due to its decreased corrosiveness and toxicity. A large number of heterogeneous catalysts were produced and tested in order to determine the scaffold, ion type and ion concentration which would produce optimum yield of biodiesel. The catalyst with 12% calcium on Zeolite β was identified as being highly effective and optimal reaction conditions were identified. Furthermore, a packed bed reactor utilizing this type of catalyst was designed, constructed and tested in order to further optimize the process. An economic analysis of the viability of the project showed that the cost of an independent farmer to produce the fuelstock required to produce biodiesel exceeds the cost of petroleum diesel under current conditions and that therefore without incentives, farmers would not be able to benefit economically from producing their own fuel. An educational website on biodiesel production and analysis was produced and a laboratory experiment demonstrating the production of biodiesel was developed and implemented into the Organic Chemistry II laboratory curriculum at UNCP. Five workshops for local farmers and agricultural agents were held in order to inform the broader community about the various fuelstock available, their cultivation and the process and advantages of biodiesel use and production. This project fits both

  8. Biodiesel production, properties and feedstocks

    Science.gov (United States)

    Biodiesel, defined as the mono-alkyl esters of vegetable oils or animal fats, is an environmentally attractive alternative to conventional petroleum diesel fuel (petrodiesel). Produced by transesterification with a monohydric alcohol, usually methanol, biodiesel has many important technical advantag...

  9. Sustainable Biocatalytic Biodiesel Production

    DEFF Research Database (Denmark)

    Güzel, Günduz

    As part of his PhD studies, Gündüz Güzel examined the thermodynamics of reactions involved in biocatalytic biodiesel production processes, with a specific focus on phase equilibria of reactive systems. He carried out the thermodynamic analyses of biocatalytic processes in terms of phase and chemi......As part of his PhD studies, Gündüz Güzel examined the thermodynamics of reactions involved in biocatalytic biodiesel production processes, with a specific focus on phase equilibria of reactive systems. He carried out the thermodynamic analyses of biocatalytic processes in terms of phase...... and chemical equilibria as part of his main sustainable biodiesel project. The transesterification reaction of vegetable oils or fats with an aliphatic alcohol – in most cases methanol or ethanol – yields biodiesel (long-chain fatty acid alkyl esters – FAAE) as the main product in the presence of alkaline...

  10. Genetic Engineering Strategies for Enhanced Biodiesel Production.

    Science.gov (United States)

    Hegde, Krishnamoorthy; Chandra, Niharika; Sarma, Saurabh Jyoti; Brar, Satinder Kaur; Veeranki, Venkata Dasu

    2015-07-01

    The focus on biodiesel research has shown a tremendous growth over the last few years. Several microbial and plant sources are being explored for the sustainable biodiesel production to replace the petroleum diesel. Conventional methods of biodiesel production have several limitations related to yield and quality, which led to development of new engineering strategies to improve the biodiesel production in plants, and microorganisms. Substantial progress in utilizing algae, yeast, and Escherichia coli for the renewable production of biodiesel feedstock via genetic engineering of fatty acid metabolic pathways has been reported in the past few years. However, in most of the cases, the successful commercialization of such engineering strategies for sustainable biodiesel production is yet to be seen. This paper systematically presents the drawbacks in the conventional methods for biodiesel production and an exhaustive review on the present status of research in genetic engineering strategies for production of biodiesel in plants, and microorganisms. Further, we summarize the technical challenges need to be tackled to make genetic engineering technology economically sustainable. Finally, the need and prospects of genetic engineering technology for the sustainable biodiesel production and the recommendations for the future research are discussed.

  11. Production of Biodiesel from Microalgae

    OpenAIRE

    Danilović Bojana R.; Avramović Jelena M.; Ćirić Jovan T.; Savić Dragiša S.; Veljković Vlada B.

    2012-01-01

    In recent years, more attention has been paid to the use of third generation feedstocs for the production of biodiesel. One of the most promising sources of oil for biodiesel production are microalgae. They are unicellular or colonial photosynthetic organisms, with permanently increasing industrial application in the production of not only chemicals and nutritional supplements but also biodiesel. Biodiesel productivity per hectare of cultivation area can be...

  12. Biodiesel production by microalgal biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Huang, GuanHua [School of Chemical Engineering and Technology, China University of Mining and Technology (China); Chen, Feng [School of Biological Sciences, The University of Hong Kong, Pokfulam, Hong Kong (China); College of Light Industry and Food Sciences, South China University of Technology, Guangzhou (China); Wei, Dong; Zhang, XueWu; Chen, Gu [College of Light Industry and Food Sciences, South China University of Technology, Guangzhou (China)

    2010-01-15

    Biodiesel has received much attention in recent years. Although numerous reports are available on the production of biodiesel from vegetable oils of terraneous oil-plants, such as soybean, sunflower and palm oils, the production of biodiesel from microalgae is a newly emerging field. Microalgal biotechnology appears to possess high potential for biodiesel production because a significant increase in lipid content of microalgae is now possible through heterotrophic cultivation and genetic engineering approaches. This paper provides an overview of the technologies in the production of biodiesel from microalgae, including the various modes of cultivation for the production of oil-rich microalgal biomass, as well as the subsequent downstream processing for biodiesel production. The advances and prospects of using microalgal biotechnology for biodiesel production are discussed. (author)

  13. Current biodiesel production technologies: A comparative review

    International Nuclear Information System (INIS)

    Highlights: ► In this paper we review the technologies related to biodiesel production. ► 4 Primary approaches reviewed are direct use and blending of oils, micro-emulsions, pyrolysis and transesterification method. ► Both advantages and disadvantages of the different biodiesel production methods are also discussed. ► The most common technology of biodiesel production is transesterification of oils. ► Selection of a transesterification method depends on the amount of FFA and water content of the feedstock. - Abstract: Despite the high energy demand in the industrialized world and the pollution problems caused by widespread use of fossil fuels, the need for developing renewable energy sources with less environmental impacts are increasing. Biodiesel production is undergoing rapid and extensive technological reforms in industries and academia. The major obstacle in production and biodiesel commercialization path is production cost. Thus, in previous years numerous studies on the use of technologies and different methods to evaluate optimal conditions of biodiesel production technically and economically have been carried out. In this paper, a comparative review of the current technological methods so far used to produce biodiesel has been investigated. Four primary approaches to make biodiesel are direct use and blending of vegetable oils, micro-emulsions, thermal cracking (pyrolysis) and transesterification. Transesterification reaction, the most common method in the production of biodiesel, is emphasized in this review. The two types of transestrification process; catalytic and non-catalytic are discussed at length in the paper. Both advantages and disadvantages of the different biodiesel production methods are also discussed.

  14. Production of biodiesel from microalgae

    Directory of Open Access Journals (Sweden)

    Danilović Bojana R.

    2014-01-01

    Full Text Available In recent years, more attention has been paid to the use of third generation feedstocs for the production of biodiesel. One of the most promising sources of oil for biodiesel production are microalgae. They are unicellular or colonial photosynthetic organisms, with permanently increasing industrial application in the production of not only chemicals and nutritional supplements but also biodiesel. Biodiesel productivity per hectare of cultivation area can be up to 100 times higher for microalgae than for oil crops. Also, microalgae can grow in a variety of environments that are often unsuitable for agricultural purposes. Microalgae oil content varies in different species and can reach up to 77% of dry biomass, while the oil productivity by the phototrophic cultivation of microalgae is up to 122 mg/l/d. Variations of the growth conditions and the implementation of the genetic engineering can induce the changes in the composition and productivity of microalgal oil. Biodiesel from microalgae can be produced in two ways: by transesterification of oil extracted from biomass or by direct transesterification of algal biomass (so called in situ transesterification. This paper reviews the curent status of microalgae used for the production of biodiesel including their isolation, cultivation, harvesting and conversion to biodiesel. Because of high oil productivity, microalgae will play a significant role in future biodiesel production. The advantages of using microalgae as a source for biofuel production are increased efficiency and reduced cost of production. Also, microalgae do not require a lot of space for growing and do not have a negative impact on the global food and water supplies. Disadvantages of using microalgae are more difficult separation of biomass and the need for further research to develop standardized methods for microalgae cultivation and biodiesel production. Currently, microalgae are not yet sustainable option for the commercial

  15. Operation and Control of Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Huusom, Jakob Kjøbsted; Nordblad, Mathias;

    This work explores the control of biodiesel production via an enzymatic catalyst. The process involves the transesterification of oils/fats with an alcohol (usually methanol or ethanol), using enzymatic catalysts to generate mono-alkyl esters (the basis of biodiesel) and glycerol as by......-product. Current literature indicates that enzymatic processing of oils and fats to produce biodiesel is technically feasible and developments in immobilization technology indicate that enzyme catalysts can become cost effective compared to chemical processing. However, with very few exceptions, enzyme technology...... is not currently used in commercial-scale biodiesel production. This is mainly due to non-optimized process designs, which do not use the full potential of the catalysts in a cost-efficient way. Furthermore is it unclear what process variables need to be monitored and controlled to ensure optimal economics...

  16. FEATURES OF BIODIESEL PRODUCTION

    OpenAIRE

    Рябцев, Геннадій Леонідович; Литвиненко, Євгеній Юрійович; Бурлаков, Володимир Михайлович

    2015-01-01

    Biodiesel has several advantages compared with conventional fuels, both environmental and operational. But these benefits should not be offset by the potential negative environmental impacts associated with land use or improper use of obsolete technologies.Biodiesel is not a panacea for energy diseases. Its implementation requires solving a number of problems: biodiesel are usually made from plant material, the scope of which is limited to the needs of the food industry; use of energy efficie...

  17. Optimizing biodiesel production in India

    International Nuclear Information System (INIS)

    India is expected to at least double its fuel consumption in the transportation sector by 2030. To contribute to the fuel supply, renewable energies such as jatropha appear to be an attractive resource for biodiesel production in India as it can be grown on waste land and does not need intensive water supply. In order to produce biodiesel at a competitive cost, the biodiesel supply chain - from biomass harvesting to biodiesel delivery to the consumers - is analyzed. A mixed integer linear programming model is used in order to determine the optimal number and geographic locations of biodiesel plants. The optimization is based on minimization of the costs of the supply chain with respect to the biomass, production and transportation costs. Three biodiesel blends are considered, B2, B5 and B10. For each blend, 13 scenarios are considered where yield, biomass cost, cake price, glycerol price, transport cost and investment costs are studied. A sensitivity analysis is carried out on both those parameters and the resulting locations of the plants. The emissions of the supply chain are also considered. The results state that the biomass cost has most influence on the biodiesel cost (an increase of feedstock cost increases the biodiesel cost by about 40%) and to a lower effect, the investment cost and the glycerol price. Moreover, choosing the right set of production plant locations highly depends on the scenarios that have the highest probability to occur, for which the production plant locations still produce a competitive biodiesel cost and emissions from the transportation are minimum. In this study, one set of plant locations happened to meet these two requirements.

  18. Use of Reactive Distillation for Biodiesel Production: A Literature Survey

    Directory of Open Access Journals (Sweden)

    Muhammad Dani Supardan

    2006-06-01

    Full Text Available Biodiesel has been shown to be the best substitute for fossil-based fuels to its environmental advantages and renewable resource availability. There is a great demand for the commercialization of biodiesel production, which in turn calls for a technically and economically reactor technology. The production of biodiesel in existing batch and continuous-flow processes requires excess alcohol, typically 100%, over the stoichiometric molar requirement in order to drive the chemical reaction to completion. In this study, a novel reactor system using a reactive distillation (RD technique was discussed for biodiesel production. RD is a chemical unit operation in which chemical reactions and separations occur simultaneously in one unit. It is an effective alternative to the classical combination of reactor and separation units especially when involving reversible or consecutive chemical reactions such as transesterication process in biodiesel production.

  19. Industrial Products from Biodiesel Glycerol

    Science.gov (United States)

    The continual rise in demand for and cost of petroleum fuels has resulted in an increased demand for alternative fuels. This has resulted in a worldwide surge in the use of biodiesel, a renewable fuel derived from oils and fats, with world production projected to approach 1 billion gallons by the e...

  20. Industrial Products from Biodiesel Glycerol

    Science.gov (United States)

    The rise in cost of petroleum fuels has caused an increased interest in alternative fuels. This has resulted in a worldwide surge in the use of biodiesel, a renewable fuel derived from oils and fats, with world production projected to approach 1 billion gallons by the end of 2006. This rapid growt...

  1. Mississippi State Biodiesel Production Project

    Energy Technology Data Exchange (ETDEWEB)

    Rafael Hernandez; Todd French; Sandun Fernando; Tingyu Li; Dwane Braasch; Juan Silva; Brian Baldwin

    2008-03-20

    Biodiesel is a renewable fuel conventionally generated from vegetable oils and animal fats that conforms to ASTM D6751. Depending on the free fatty acid content of the feedstock, biodiesel is produced via transesterification, esterification, or a combination of these processes. Currently the cost of the feedstock accounts for more than 80% of biodiesel production cost. The main goal of this project was to evaluate and develop non-conventional feedstocks and novel processes for producing biodiesel. One of the most novel and promising feedstocks evaluated involves the use of readily available microorganisms as a lipid source. Municipal wastewater treatment facilities (MWWTF) in the USA produce (dry basis) of microbial sludge annually. This sludge is composed of a variety of organisms, which consume organic matter in wastewater. The content of phospholipids in these cells have been estimated at 24% to 25% of dry mass. Since phospholipids can be transesterified they could serve as a ready source of biodiesel. Examination of the various transesterification methods shows that in situ conversion of lipids to FAMEs provides the highest overall yield of biodiesel. If one assumes a 7.0% overall yield of FAMEs from dry sewage sludge on a weight basis, the cost per gallon of extracted lipid would be $3.11. Since the lipid is converted to FAMEs, also known as biodiesel, in the in Situ extraction process, the product can be used as is for renewable fuel. As transesterification efficiency increases the cost per gallon drops quickly, hitting $2.01 at 15.0% overall yield. An overall yield of 10.0% is required to obtain biodiesel at $2.50 per gallon, allowing it to compete with soybean oil in the marketplace. Twelve plant species with potential for oil production were tested at Mississippi State, MS. Of the species tested, canola, rapeseed and birdseed rape appear to have potential in Mississippi as winter annual crops because of yield. Two perennial crops were investigated, Chinese

  2. The effect of economic variables over a biodiesel production plant

    Energy Technology Data Exchange (ETDEWEB)

    Marchetti, J.M., E-mail: jmarchetti@plapiqui.edu.ar [Planta Piloto de Ingenieria Quimica (UNS-CONICET), Camino La Carrindanga km 7, 8000 Bahia Blanca (Argentina)

    2011-09-15

    Highlights: {yields} Influence of the mayor economic parameters for biodiesel production. {yields} Variations of profitability of a biodiesel plant due to changes in the market scenarios. {yields} Comparison of economic indicators of a biodiesel production facility when market variables are modified. - Abstract: Biodiesel appears as one of the possible alternative renewable fuels to substitute diesel fuel derived from petroleum. Several researches have been done on the technical aspects of biodiesel production in an attempt to develop a better and cleaner alternative to the conventional process. Economic studies have been carried out to have a better understanding of the high costs and benefits of different technologies in the biodiesel industry. In this work it is studied the effect of the most important economic variables of a biodiesel production process over the general economy of a conventional plant which employs sodium methoxide as catalyst. It has been analyzed the effect of the oil price, the amount of free fatty acid, the biodiesel price, the cost of the glycerin, the effect due to the modification on the methanol price, the washing water price, and several others. Small variations on some of the major market variables would produce significant effects over the global economy of the plant, making it non profitable in some cases.

  3. Mississippi State Biodiesel Production Project

    Energy Technology Data Exchange (ETDEWEB)

    Rafael Hernandez; Todd French; Sandun Fernando; Tingyu Li; Dwane Braasch; Juan Silva; Brian Baldwin

    2008-03-20

    Biodiesel is a renewable fuel conventionally generated from vegetable oils and animal fats that conforms to ASTM D6751. Depending on the free fatty acid content of the feedstock, biodiesel is produced via transesterification, esterification, or a combination of these processes. Currently the cost of the feedstock accounts for more than 80% of biodiesel production cost. The main goal of this project was to evaluate and develop non-conventional feedstocks and novel processes for producing biodiesel. One of the most novel and promising feedstocks evaluated involves the use of readily available microorganisms as a lipid source. Municipal wastewater treatment facilities (MWWTF) in the USA produce (dry basis) of microbial sludge annually. This sludge is composed of a variety of organisms, which consume organic matter in wastewater. The content of phospholipids in these cells have been estimated at 24% to 25% of dry mass. Since phospholipids can be transesterified they could serve as a ready source of biodiesel. Examination of the various transesterification methods shows that in situ conversion of lipids to FAMEs provides the highest overall yield of biodiesel. If one assumes a 7.0% overall yield of FAMEs from dry sewage sludge on a weight basis, the cost per gallon of extracted lipid would be $3.11. Since the lipid is converted to FAMEs, also known as biodiesel, in the in Situ extraction process, the product can be used as is for renewable fuel. As transesterification efficiency increases the cost per gallon drops quickly, hitting $2.01 at 15.0% overall yield. An overall yield of 10.0% is required to obtain biodiesel at $2.50 per gallon, allowing it to compete with soybean oil in the marketplace. Twelve plant species with potential for oil production were tested at Mississippi State, MS. Of the species tested, canola, rapeseed and birdseed rape appear to have potential in Mississippi as winter annual crops because of yield. Two perennial crops were investigated, Chinese

  4. Genetic engineering of microorganisms for biodiesel production.

    Science.gov (United States)

    Lin, Hui; Wang, Qun; Shen, Qi; Zhan, Jumei; Zhao, Yuhua

    2013-01-01

    Biodiesel, as one type of renewable energy, is an ideal substitute for petroleum-based diesel fuel and is usually made from triacylglycerides by transesterification with alcohols. Biodiesel production based on microbial fermentation aiming to establish more efficient, less-cost and sustainable biodiesel production strategies is under current investigation by various start-up biotechnology companies and research centers. Genetic engineering plays a key role in the transformation of microbes into the desired cell factories with high efficiency of biodiesel production. Here, we present an overview of principal microorganisms used in the microbial biodiesel production and recent advances in metabolic engineering for the modification required. Overexpression or deletion of the related enzymes for de novo synthesis of biodiesel is highlighted with relevant examples.

  5. Genetic engineering of microorganisms for biodiesel production

    OpenAIRE

    Lin, Hui; Wang, Qun; Shen, Qi; Zhan, Jumei; Zhao, YuHua

    2012-01-01

    Biodiesel, as one type of renewable energy, is an ideal substitute for petroleum-based diesel fuel and is usually made from triacylglycerides by transesterification with alcohols. Biodiesel production based on microbial fermentation aiming to establish more efficient, less-cost and sustainable biodiesel production strategies is under current investigation by various start-up biotechnology companies and research centers. Genetic engineering plays a key role in the transformation of microbes in...

  6. Catalytic production of biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Theilgaard Madsen, A.

    2011-07-01

    The focus of this thesis is the catalytic production of diesel from biomass, especially emphasising catalytic conversion of waste vegetable oils and fats. In chapter 1 an introduction to biofuels and a review on different catalytic methods for diesel production from biomass is given. Two of these methods have been used industrially for a number of years already, namely the transesterification (and esterification) of oils and fats with methanol to form fatty acid methyl esters (FAME), and the hydrodeoxygenation (HDO) of fats and oils to form straight-chain alkanes. Other possible routes to diesel include upgrading and deoxygenation of pyrolysis oils or aqueous sludge wastes, condensations and reductions of sugars in aqueous phase (aqueous-phase reforming, APR) for monofunctional hydrocarbons, and gasification of any type of biomass followed by Fischer-Tropsch-synthesis for alkane biofuels. These methods have not yet been industrialised, but may be more promising due to the larger abundance of their potential feedstocks, especially waste feedstocks. Chapter 2 deals with formation of FAME from waste fats and oils. A range of acidic catalysts were tested in a model fat mixture of methanol, lauric acid and trioctanoin. Sulphonic acid-functionalised ionic liquids showed extremely fast convertion of lauric acid to methyl laurate, and trioctanoate was converted to methyl octanoate within 24 h. A catalyst based on a sulphonated carbon-matrix made by pyrolysing (or carbonising) carbohydrates, so-called sulphonated pyrolysed sucrose (SPS), was optimised further. No systematic dependency on pyrolysis and sulphonation conditions could be obtained, however, with respect to esterification activity, but high activity was obtained in the model fat mixture. SPS impregnated on opel-cell Al{sub 2}O{sub 3} and microporous SiO{sub 2} (ISPS) was much less active in the esterification than the original SPS powder due to low loading and thereby low number of strongly acidic sites on the

  7. Messiah College Biodiesel Fuel Generation Project Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Zummo, Michael M; Munson, J; Derr, A; Zemple, T; Bray, S; Studer, B; Miller, J; Beckler, J; Hahn, A; Martinez, P; Herndon, B; Lee, T; Newswanger, T; Wassall, M

    2012-03-30

    Many obvious and significant concerns arise when considering the concept of small-scale biodiesel production. Does the fuel produced meet the stringent requirements set by the commercial biodiesel industry? Is the process safe? How are small-scale producers collecting and transporting waste vegetable oil? How is waste from the biodiesel production process handled by small-scale producers? These concerns and many others were the focus of the research preformed in the Messiah College Biodiesel Fuel Generation project over the last three years. This project was a unique research program in which undergraduate engineering students at Messiah College set out to research the feasibility of small-biodiesel production for application on a campus of approximately 3000 students. This Department of Energy (DOE) funded research program developed out of almost a decade of small-scale biodiesel research and development work performed by students at Messiah College. Over the course of the last three years the research team focused on four key areas related to small-scale biodiesel production: Quality Testing and Assurance, Process and Processor Research, Process and Processor Development, and Community Education. The objectives for the Messiah College Biodiesel Fuel Generation Project included the following: 1. Preparing a laboratory facility for the development and optimization of processors and processes, ASTM quality assurance, and performance testing of biodiesel fuels. 2. Developing scalable processor and process designs suitable for ASTM certifiable small-scale biodiesel production, with the goals of cost reduction and increased quality. 3. Conduct research into biodiesel process improvement and cost optimization using various biodiesel feedstocks and production ingredients.

  8. Biodiesel production by transesterification using immobilized lipase.

    Science.gov (United States)

    Narwal, Sunil Kumar; Gupta, Reena

    2013-04-01

    Biodiesel can be produced by transesterification of vegetable or waste oil catalysed by lipases. Biodiesel is an alternative energy source to conventional fuel. It combines environmental friendliness with biodegradability, low toxicity and renewability. Biodiesel transesterification reactions can be broadly classified into two categories: chemical and enzymatic. The production of biodiesel using the enzymatic route eliminates the reactions catalysed under acid or alkali conditions by yielding product of very high purity. The modification of lipases can improve their stability, activity and tolerance to alcohol. The cost of lipases and the relatively slower reaction rate remain the major obstacles for enzymatic production of biodiesel. However, this problem can be solved by immobilizing the enzyme on a suitable matrix or support, which increases the chances of re-usability. The main factors affecting biodiesel production are composition of fatty acids, catalyst, solvents, molar ratio of alcohol and oil, temperature, water content, type of alcohol and reactor configuration. Optimization of these parameters is necessary to reduce the cost of biodiesel production.

  9. Biodiesel production from municipal secondary sludge.

    Science.gov (United States)

    Kumar, Manish; Ghosh, Pooja; Khosla, Khushboo; Thakur, Indu Shekhar

    2016-09-01

    In the present study, feasibility of biodiesel production from freeze dried sewage sludge was studied and its yield was enhanced by optimization of the in situ transesterification conditions (temperature, catalyst and concentration of sludge solids). Optimized conditions (45°C, 5% catalyst and 0.16g/mL sludge solids) resulted in a 20.76±0.04% biodiesel yield. The purity of biodiesel was ascertained by GC-MS, FT-IR and NMR ((1)H and (13)C) spectroscopy. The biodiesel profile obtained revealed the predominance of methyl esters of fatty acids such as oleic, palmitic, myristic, stearic, lauric, palmitoleic and linoleic acids indicating potential use of sludge as a biodiesel feedstock. PMID:27240231

  10. Innovative Canadian Process Technology For Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Johar, Sangat; Norton, Kevin

    2010-09-15

    The need for increasing renewable and alternative energy in the global energy mix has been well recognized by Governments and major scientific forums to reduce climate change impact for this living planet. Biodiesel has very high potential for GHG emission reduction. An innovative process developed in Canada provides solution to mitigate the feedstock, yield and quality issues impacting the industry. The Biox process uses a continuous process which reduces reaction times, provides > 99% yield of high quality biodiesel product. The process is feedstock flexible and can use cheaper higher FFA feedstock providing a sustainable approach for biodiesel production.

  11. Survey of alternative feedstocks for biodiesel production

    Science.gov (United States)

    Summarized will be results obtained from the production of biodiesel from several alternative feedstocks with promising agronomic characteristics. Such feedstocks include camelina (Camelina sativa L.), coriander (Coriandrum sativum L.), field pennycress (Thlaspi arvense L.), and meadowfoam (Limnanth...

  12. Production of Biodiesel by Enzymatic Transesterification: Review

    Directory of Open Access Journals (Sweden)

    Abdel E. Ghaly

    2010-01-01

    Full Text Available Problem Statement: The research on the production of biodiesel has increased significantly in recent years because of the need for an alternative fuel which endows with biodegradability, low toxicity and renewability. Plant oils, animal fats, microalgal oils and waste products such as animal rendering, fish processing waste and cooking oils have been employed as feedstocks for biodiesel production. In order to design an economically and environmentally sustainable biodiesel production process, a proper understanding of the factors affecting the process and their relative importance is necessary. Approach: A comprehensive review of the literature on the subject of biodiesel production was carried out. Traditionally biodiesel has been produced using either acid or base catalysts. The multi-step purification of end products, wastewater treatment and energy demand of the conventional process has lead to search for alternative option for production of biodiesel. The use the enzyme lipase as a biocatalyst for the transesterification reaction step in biodiesel production has been extensively investigated. Lipase is produced by all living organisms and can be used intracellularly or extracellularly. Conclusion: To date, the most popular microbes used for their lipases have been filamentous fungi and recombinant bacteria. A summary of lipases used in transesterification and their optimum operating conditions is provided. In addition to the choice of lipase employed, factors which make the transesterification process feasible and ready for commercialization are: enzyme modification, the selection of feedstock and alcohol, use of common solvents, pretreatment of the lipase, alcohol to oil molar ratio, water activity/content and reaction temperature. Optimization of these parameters is necessary in order to reduce the cost of biodiesel production. Use of no/low cost waste materials as feedstocks will have double environmental benefits by reducing the

  13. Energy aspects of microalgal biodiesel production

    OpenAIRE

    Edith Martinez-Guerra; Veera Gnaneswar Gude

    2016-01-01

    Algal biodiesel production will play a significant role in sustaining future transportation fuel supplies. A large number of researchers around the world are investigating into making this process sustainable by increasing the energy gains and by optimizing resource-utilization efficiencies. Although, research is being pursued aggressively in all aspects of algal biodiesel production from microalgal cell cultivation, cell harvesting, and extraction and transesterification steps to the final p...

  14. TUBULAR PHOTOBIOREACTOR FOR MICROALGAE BIODIESEL PRODUCTION

    OpenAIRE

    Nkongolo Mulumba; Ihab H. Farag

    2012-01-01

    Biodiesel production from algae is a promising technique. Microalgae have the potential to produce 5,000-15,000 gallons of biodiesel/(acre-year). However, there are challenges; these include high yieldof algae biomass with high lipid content and the effective technique to harvest the grown algae, extract the algal oil and transesterify the oil to biodiesel. In this project Tubular PhotoBioReactor (TPBR) was designed and achieved a ten times increase in algae concentration. It produced 1g of d...

  15. Toxicology of Biodiesel Combustion products

    Science.gov (United States)

    1. Introduction The toxicology of combusted biodiesel is an emerging field. Much of the current knowledge about biological responses and health effects stems from studies of exposures to other fuel sources (typically petroleum diesel, gasoline, and wood) incompletely combusted. ...

  16. Engineering challenges in biodiesel production from microalgae.

    Science.gov (United States)

    Aguirre, Ana-Maria; Bassi, Amarjeet; Saxena, Priyanka

    2013-09-01

    In recent years, the not too distant exhaustion of fossil fuels is becoming apparent. Apart from this, the combustion of fossil fuels leads to environmental concerns, the emission of greenhouse gases and issues with global warming and health problems. Production of biodiesel from microalgae may represent an attractive solution to the above mentioned problems, and can offer a renewable source of fuel with fewer pollutants. This review presents a compilation of engineering challenges related to microalgae as a source of biodiesel. Advantages and current limitations for biodiesel production are discussed; some aspects of algae cells biology, with emphasis on cell wall composition, as it represents a barrier for fatty acid extraction and lipid droplets are also presented. In addition, recent advances in the different stages of the manufacturing process are included, starting from the strain selection and finishing in the processing of fatty acids into biodiesel. PMID:22804334

  17. Biodiesel production with immobilized lipase: A review.

    Science.gov (United States)

    Tan, Tianwei; Lu, Jike; Nie, Kaili; Deng, Li; Wang, Fang

    2010-01-01

    Fatty acid alkyl esters, also called biodiesel, are environmentally friendly and show great potential as an alternative liquid fuel. Biodiesel is produced by transesterification of oils or fats with chemical catalysts or lipase. Immobilized lipase as the biocatalyst draws high attention because that process is "greener". This article reviews the current status of biodiesel production with immobilized lipase, including various lipases, immobilization methods, various feedstocks, lipase inactivation caused by short chain alcohols and large scale industrialization. Adsorption is still the most widely employed method for lipase immobilization. There are two kinds of lipase used most frequently especially for large scale industrialization. One is Candida antartica lipase immobilized on acrylic resin, and the other is Candida sp. 99-125 lipase immobilized on inexpensive textile membranes. However, to further reduce the cost of biodiesel production, new immobilization techniques with higher activity and stability still need to be explored.

  18. Isothermal calorimetry on enzymatic biodiesel production

    DEFF Research Database (Denmark)

    Fjerbæk, Lene

    2008-01-01

    information about effects taking place when using lipases immobilized on an inert carrier for transesterification of a triglyceride and an alcohol as for biodiesel production. The biodiesel is produced by rapeseed oil and methanol as well as ethanol and a commercial biocatalyst Novozym 435 from Novozymes...... containing a Candida Antarctica B lipase immobilized on an acrylic resin. The reaction investigated is characterized by immiscible liquids (oil, methanol, glycerol and biodiesel) and enzymes imm. on an inert carrier during reaction, which allows several effects to take place that during normal reaction...... conditions can not be elucidated. These effects have been observed with isothermal calorimetry bringing forth new information about the reaction of enzymes catalyzing transesterification. Enzymatic biodiesel production has until now not been investigated with isothermal microcalorimetry, but the results...

  19. Environmental Sustainability Analysis of Biodiesel Production

    DEFF Research Database (Denmark)

    Herrmann, Ivan Tengbjerg; Hauschild, Michael Michael Zwicky; Birkved, Morten

    like these require a life cycle perspective on the biofuel - from the cradle (production of the agricultural feedstock) to the grave (use as fuel). An environmental life cycle assessment is performed on biodiesel to compare different production schemes including chemical and enzymatic esterification...... with the use of methanol or ethanol. The life cycle assessment includes all processes needed for the production, distribution and use of the biodiesel (the product system), and it includes all relevant environmental impacts from the product system, ranging from global impacts like climate change and loss...... of non-renewable resources over regional impacts like acidification, eutrophication and photochemical ozone to more local impacts like ecotoxicity and physical impacts like land use, to allow judging on the overall environmental sustainability of the biodiesel and to support identification of the main...

  20. Energy aspects of microalgal biodiesel production

    Directory of Open Access Journals (Sweden)

    Edith Martinez-Guerra

    2016-03-01

    Full Text Available Algal biodiesel production will play a significant role in sustaining future transportation fuel supplies. A large number of researchers around the world are investigating into making this process sustainable by increasing the energy gains and by optimizing resource-utilization efficiencies. Although, research is being pursued aggressively in all aspects of algal biodiesel production from microalgal cell cultivation, cell harvesting, and extraction and transesterification steps to the final product separation and purification, there is a large disparity in the data presented in recent reports making it difficult to assess the real potential of microalgae as a future energy source. This article discusses some of the key issues in energy consumption in the process of algal biodiesel production and identifies the areas for improvement to make this process energy-positive and sustainable.

  1. Biodiesel production using heterogenous catalyst

    Science.gov (United States)

    The current transesterification of triacylglycerides (TAG) to produce biodiesel is based on the homogenous catalyst method using strong base such as hydroxides or methoxides. However, this method results in a number of problems: (1) acid pre-treatment is required of feedstocks high in free fatty ac...

  2. Sustainable Algae Biodiesel Production in Cold Climates

    Directory of Open Access Journals (Sweden)

    Rudras Baliga

    2010-01-01

    Full Text Available This life cycle assessment aims to determine the most suitable operating conditions for algae biodiesel production in cold climates to minimize energy consumption and environmental impacts. Two hypothetical photobioreactor algae production and biodiesel plants located in Upstate New York (USA are modeled. The photobioreactor is assumed to be housed within a greenhouse that is located adjacent to a fossil fuel or biomass power plant that can supply waste heat and flue gas containing CO2 as a primary source of carbon. Model results show that the biodiesel areal productivity is high (19 to 25 L of BD/m2/yr. The total life cycle energy consumption was between 15 and 23 MJ/L of algae BD and 20 MJ/L of soy BD. Energy consumption and air emissions for algae biodiesel are substantially lower than soy biodiesel when waste heat was utilized. Algae's most substantial contribution is a significant decrease in the petroleum consumed to make the fuel.

  3. Alternate feedstocks and technologies for biodiesel production

    Science.gov (United States)

    U.S. biodiesel production is presently estimated at 800 million gallons annually, and this fuel is no longer a research curiosity - it is entering the nation’s fuel infrastructure. Some estimates are that production will reach nearly twice that value in the next 10 to 12 years. This would stress a...

  4. Process for biodiesel production from Cryptococcus curvatus.

    Science.gov (United States)

    Thiru, Meikandhan; Sankh, Santosh; Rangaswamy, Vidhya

    2011-11-01

    The objective of the current report is process optimization for economical production of lipids by the well known oleaginous yeast Cryptococcus curvatus and conversion of the lipids to biodiesel. A high cell density fed-batch cultivation on low cost substrate viz. crude glycerol resulted in a dry biomass and oil yield of up to 69 g/L and 48% (w/w), respectively. The process was scaled up easily to 26 L. The oil extraction process was also optimized using environmentally safe solvents. The oil profile indicated a high oleic acid content followed by palmitic acid, stearic acid and linoleic acid. The oil was trans-esterified to biodiesel and thoroughly characterized. This is the first end to end report on production of biodiesel from the C. curvatus oil.

  5. Jatropha bio-diesel production and use

    Energy Technology Data Exchange (ETDEWEB)

    Achten, W.M.J.; Aerts, R.; Muys, B. [Katholieke Universiteit Leuven, Division Forest, Nature and Landscape, Celestijnenlaan 200 E Box 2411, BE-3001 Leuven (Belgium); Verchot, L. [World Agroforestry Centre (ICRAF) Head Quarters, United Nations Avenue, P.O. Box 30677, Nairobi (Kenya); Franken, Y.J. [FACT Foundation, Horsten 1, 5612 AX Eindhoven (Netherlands); Mathijs, E. [Katholieke Universiteit Leuven, Division Agricultural and Food Economics, Willem de Croylaan 42 Box 2424, BE-3001 Leuven (Belgium); Singh, V.P. [World Agroforestry Centre (ICRAF) Regional Office for South Asia, CG Block, 1st Floor, National Agricultural Science Centre, Dev Prakash Shastri Marg, Pusa, New Delhi 110 012 (India)

    2008-12-15

    The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors, policy makers and clean development mechanism (CDM) project developers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. However, JCL is still a wild plant of which basic agronomic properties are not thoroughly understood and the environmental effects have not been investigated yet. Gray literature reports are very optimistic on simultaneous wasteland reclamation capability and oil yields, further fueling the Jatropha bio-diesel hype. In this paper, we give an overview of the currently available information on the different process steps of the production process of bio-diesel from JCL, being cultivation and production of seeds, extraction of the oil, conversion to and the use of the bio-diesel and the by-products. Based on this collection of data and information the best available practice, the shortcomings and the potential environmental risks and benefits are discussed for each production step. The review concludes with a call for general precaution and for science to be applied. (author)

  6. TUBULAR PHOTOBIOREACTOR FOR MICROALGAE BIODIESEL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Nkongolo Mulumba

    2012-02-01

    Full Text Available Biodiesel production from algae is a promising technique. Microalgae have the potential to produce 5,000-15,000 gallons of biodiesel/(acre-year. However, there are challenges; these include high yieldof algae biomass with high lipid content and the effective technique to harvest the grown algae, extract the algal oil and transesterify the oil to biodiesel. In this project Tubular PhotoBioReactor (TPBR was designed and achieved a ten times increase in algae concentration. It produced 1g of dry algal biomass per liter of medium within 12 days, with a lipid content of 12% approximately. Healthy algal culture grew well in the TPBR reaching 56x106 cells/mL of culture medium. The 10 fold increase is higher than those reported for open ponds and helical photobioreactor.

  7. Perspectives for biotechnological production of biodiesel and impacts

    Energy Technology Data Exchange (ETDEWEB)

    Du Wei; Li Wei; Sun Ting; Chen Xin; Liu Dehua [Tsinghua Univ., Beijing (China). Dept. of Chemical Engineering

    2008-06-15

    In recent years, biological ways for biodiesel production have drawn an increasing attention and compared to chemical approaches, lipase-mediated alcoholysis for biodiesel production has many advantages. Currently, there are extensive reports about enzyme-mediated alcoholysis for biodiesel production, and based on the application forms of biocatalyst, the related research can be classified into immobilized lipase, whole cell catalyst, and liquid lipase-mediated alcoholysis for biodiesel production, respectively. This mini-review is focusing on the study of the aforementioned three forms of biocatalyst for biodiesel production, as well as its impacts and prospects. (orig.)

  8. Evaluation of hydrolysis-esterification biodiesel production from wet microalgae.

    Science.gov (United States)

    Song, Chunfeng; Liu, Qingling; Ji, Na; Deng, Shuai; Zhao, Jun; Li, Shuhong; Kitamura, Yutaka

    2016-08-01

    Wet microalgae hydrolysis-esterification route has the advantage to avoid the energy-intensive units (e.g. drying and lipid extraction) in the biodiesel production process. In this study, techno-economic evaluation of hydrolysis-esterification biodiesel production process was carried out and compared with conventional (usually including drying, lipid extraction, esterification and transesterification) biodiesel production process. Energy and material balance of the conventional and hydrolysis-esterification processes was evaluated by Aspen Plus. The simulation results indicated that drying (2.36MJ/L biodiesel) and triolein transesterification (1.89MJ/L biodiesel) are the dominant energy-intensive stages in the conventional route (5.42MJ/L biodiesel). By contrast, the total energy consumption of hydrolysis-esterification route can be reduced to 1.81MJ/L biodiesel, and approximately 3.61MJ can be saved to produce per liter biodiesel. PMID:27209457

  9. Microbes and algae for biodiesel production - Microfuel

    Energy Technology Data Exchange (ETDEWEB)

    Ruohonen, L. [VTT Technical Research Centre of Finland, Espoo (Finland)], email: laura.ruohonen@vtt.fi; Tamminen, T. [Finnish Environment Institute (SYKE), Helsinki (Finland)

    2012-07-01

    There is an acute need to identify alternatives to replace fossil resources, in particular in transportation fuels. Thus, biomass-based biofuels such as bioethanol and biodiesel have gained significant attention towards this goal. However, the source of biomass has raised concerns; competition with the food chain and arable land must be avoided. The project focused on identification of alternative ways to produce biomass for triacylglycerides production as raw material for biodiesel, that of autotrophic production by algae, and heterotrophic production by fungi. The fungal production process is already presently implemented by Neste Oil: In the press release on 28 August 2012, Neste Oil announced the completion of the first phase of its microbial oil pilot plant. A joint algae research programme between Neste Oil and SYKE was launched in August 2011, with the aim of further developing the knowledge basis for cost-effective microalgal production in industrial-scale volumes for future production needs.

  10. Economic feasibility of biodiesel production from Macauba in Brazil

    International Nuclear Information System (INIS)

    In this work the economic feasibility of biodiesel production in Brazil by using the Macauba oil as raw matter is studied. The software SIMB-E, in which a cash flow model applied to biodiesel production is implemented, was used during simulations. Economic indexes related to biodiesel production features, as well as the competitiveness between selling prices of biodiesel and petrodiesel were considered. It was found that all of the 8 simulated scenarios were potentially profitable, but only 2 of them presented competitive biodiesel selling prices, being considered as worthwhile projects. These were seed-oil plants with alkaline transesterification. Results also indicated that the success of biodiesel production still requires additional revenues beyond that derived from biodiesel itself, including income from the feedstock coproducts and glycerol. Macauba showed to be a potential crop to be used in biodiesel production. However, the domestication and improvement on processing of this species are indispensable to ensure its availability of long-term use. - Highlights: • Competitiveness between selling prices of biodiesel and petrodiesel was the main evaluated criterion. • The main criterion to suggest worthwhile projects was the biodiesel selling price. • Biodiesel plants with integrated oil mill and alkaline transesterification were profitable. • Macauba showed to be a potential crop to be used in biodiesel production. • The domestication and improvement on processing of Macauba are indispensable

  11. A fuzzy goal programming model for biodiesel production

    Science.gov (United States)

    Lutero, D. S.; Pangue, EMU; Tubay, J. M.; Lubag, S. P.

    2016-02-01

    A fuzzy goal programming (FGP) model for biodiesel production in the Philippines was formulated with Coconut (Cocos nucifera) and Jatropha (Jatropha curcas) as sources of biodiesel. Objectives were maximization of feedstock production and overall revenue and, minimization of energy used in production and working capital for farming subject to biodiesel and non-biodiesel requirements, and availability of land, labor, water and machine time. All these objectives and constraints were assumed to be fuzzy. Model was tested for different sets of weights. Results for all sets of weights showed the same optimal allocation. Coconut alone can satisfy the biodiesel requirement of 2% per volume.

  12. ECONOMIC FEASIBILITY OF BIODIESEL PRODUCTION IN NORTH DAKOTA

    OpenAIRE

    Vanwechel, Tamara; Gustafson, Cole R.; Leistritz, F. Larry

    2003-01-01

    The U. S. biodiesel industry is rapidly expanding due to energy production concerns, environmental concerns, and recent legislation. The most common type of biodiesel in the United States is derived from soybean oil. Soybeans are a major crop in North Dakota and could easily supply a 5 million gallon per year biodiesel facility. Potential market segments of a biodiesel facility in North Dakota include agriculture, construction, and state fleet sectors based on current diesel use. However, wit...

  13. Process Simulation of enzymatic biodiesel production -at what cost can biodiesel be made with enzymes?

    DEFF Research Database (Denmark)

    Fjerbæk Søtoft, Lene; Christensen, Knud Villy; Rong, Benguang;

    The industrial production of biodiesel has had a very turbulent lifetime due to drastic changes in prices of raw materials and fossil fuels as well as regulatory changes and produced amounts of biodiesel. Biodiesel production is carried out by various forms of catalysts, but industrially only...... as well as environmental impacts of the alternative process must be evaluated towards the conventional process. With process simulation tools, an evaluation will be carried out looking at what it will cost to produce biodiesel with enzymes. Different scenarios will be taken into account with variations...

  14. Analysis of the Industrial Biodiesel Production Process

    International Nuclear Information System (INIS)

    The reaction of transesterification is the chemical transformation through which you get biodiesel from vegetable oils. The purpose of this work is to plan carefully all the stages of various biodiesel production processes on the basis of recent results obtained in the experimental research. These results allow defining the proper thermodynamic models to be used, the right interpretation of the phenomena and identifying the parameters which affect the process. The modelling was done with ASPENPLUS (R) defining three possible processes used in industrial purpose. A subsequent sensitivity analysis was done for each process allowing the identification of the optimal configurations. By comparing these solutions it is possible to choose the most efficient one to reduce the costs of the final product.

  15. Potential of oilseed rape for biodiesel production

    International Nuclear Information System (INIS)

    This paper investigates the concept of using oilseed rape as a feedstock for biodiesel production in the southeastern US Average oil yields from test plots over eight southeastern locations in 1992 were 1,033 liters per hectare. Seed and oil yields of Humus, a cultivar developed specifically for biofuel use, were below average at all test locations. Progress in increasing yield and thereby reducing unit costs of seed production, has been significant during the last six years. The single most important factor influencing the economic viability of biodiesel is oil yield, a function of seed yield and oil content. Other important factors include co-product credits and federal farm program benefits. Farmland idled in the southeastern US including both 10-year CRP and annual farm program hectarage is about 2.4 million hectares for the 13 states. Using the average yield of 1,033 litters, approximately 2.4 billion liters of biodiesel could be produced by fully employing this land resource annually. These data assume the use of a locally well-adapted cultivar by an experienced producer

  16. Biodiesel production from Jatropha curcas oil

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Siddharth; Sharma, M.P. [Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667 (India)

    2010-12-15

    In view of the fast depletion of fossil fuel, the search for alternative fuels has become inevitable, looking at huge demand of diesel for transportation sector, captive power generation and agricultural sector, the biodiesel is being viewed a substitute of diesel. The vegetable oils, fats, grease are the source of feedstocks for the production of biodiesel. Significant work has been reported on the kinetics of transesterification of edible vegetable oils but little work is reported on non-edible oils. Out of various non-edible oil resources, Jatropha curcas oil (JCO) is considered as future feedstocks for biodiesel production in India and limited work is reported on the kinetics of transesterification of high FFA containing oil. The present study reports a review of kinetics of biodiesel production. The paper also reveals the results of kinetics study of two-step acid-base catalyzed transesterification process carried out at pre-determined optimum temperature of 65 and 50 C for esterification and transesterification process, respectively, under the optimum condition of methanol to oil ratio of 3:7 (v/v), catalyst concentration 1% (w/w) for H{sub 2}SO{sub 4} and NaOH and 400 rpm of stirring. The yield of methyl ester (ME) has been used to study the effect of different parameters. The maximum yield of 21.2% of ME during esterification and 90.1% from transesterification of pretreated JCO has been obtained. This is the first study of its kind dealing with simplified kinetics of two-step acid-base catalyzed transesterification process carried at optimum temperature of both the steps which took about 6 h for complete conversion of TG to ME. (author)

  17. Progress and Challenges in Microalgal Biodiesel Production

    Science.gov (United States)

    Mallick, Nirupama; Bagchi, Sourav K.; Koley, Shankha; Singh, Akhilesh K.

    2016-01-01

    The last decade has witnessed a tremendous impetus on biofuel research due to the irreversible diminution of fossil fuel reserves for enormous demands of transportation vis-a-vis escalating emissions of green house gasses (GHGs) into the atmosphere. With an imperative need of CO2 reduction and considering the declining status of crude oil, governments in various countries have not only diverted substantial funds for biofuel projects but also have introduced incentives to vendors that produce biofuels. Currently, biodiesel production from microalgal biomass has drawn an immense importance with the potential to exclude high-quality agricultural land use and food safe-keeping issues. Moreover, microalgae can grow in seawater or wastewater and microalgal oil can exceed 50–60% (dry cell weight) as compared with some best agricultural oil crops of only 5–10% oil content. Globally, microalgae are the highest biomass producers and neutral lipid accumulators contending any other terrestrial oil crops. However, there remain many hurdles in each and every step, starting from strain selection and lipid accumulation/yield, algae mass cultivation followed by the downstream processes such as harvesting, drying, oil extraction, and biodiesel conversion (transesterification), and overall, the cost of production. Isolation and screening of oleaginous microalgae is one pivotal important upstream factor which should be addressed according to the need of freshwater or marine algae with a consideration that wild-type indigenous isolate can be the best suited for the laboratory to large scale exploitation. Nowadays, a large number of literature on microalgal biodiesel production are available, but none of those illustrate a detailed step-wise description with the pros and cons of the upstream and downstream processes of biodiesel production from microalgae. Specifically, harvesting and drying constitute more than 50% of the total production costs; however, there are quite a less

  18. Progress and Challenges in Microalgal Biodiesel Production

    Science.gov (United States)

    Mallick, Nirupama; Bagchi, Sourav K.; Koley, Shankha; Singh, Akhilesh K.

    2016-01-01

    The last decade has witnessed a tremendous impetus on biofuel research due to the irreversible diminution of fossil fuel reserves for enormous demands of transportation vis-a-vis escalating emissions of green house gasses (GHGs) into the atmosphere. With an imperative need of CO2 reduction and considering the declining status of crude oil, governments in various countries have not only diverted substantial funds for biofuel projects but also have introduced incentives to vendors that produce biofuels. Currently, biodiesel production from microalgal biomass has drawn an immense importance with the potential to exclude high-quality agricultural land use and food safe-keeping issues. Moreover, microalgae can grow in seawater or wastewater and microalgal oil can exceed 50–60% (dry cell weight) as compared with some best agricultural oil crops of only 5–10% oil content. Globally, microalgae are the highest biomass producers and neutral lipid accumulators contending any other terrestrial oil crops. However, there remain many hurdles in each and every step, starting from strain selection and lipid accumulation/yield, algae mass cultivation followed by the downstream processes such as harvesting, drying, oil extraction, and biodiesel conversion (transesterification), and overall, the cost of production. Isolation and screening of oleaginous microalgae is one pivotal important upstream factor which should be addressed according to the need of freshwater or marine algae with a consideration that wild-type indigenous isolate can be the best suited for the laboratory to large scale exploitation. Nowadays, a large number of literature on microalgal biodiesel production are available, but none of those illustrate a detailed step-wise description with the pros and cons of the upstream and downstream processes of biodiesel production from microalgae. Specifically, harvesting and drying constitute more than 50% of the total production costs; however, there are quite a less

  19. Progress and Challenges in Microalgal Biodiesel Production.

    Science.gov (United States)

    Mallick, Nirupama; Bagchi, Sourav K; Koley, Shankha; Singh, Akhilesh K

    2016-01-01

    The last decade has witnessed a tremendous impetus on biofuel research due to the irreversible diminution of fossil fuel reserves for enormous demands of transportation vis-a-vis escalating emissions of green house gasses (GHGs) into the atmosphere. With an imperative need of CO2 reduction and considering the declining status of crude oil, governments in various countries have not only diverted substantial funds for biofuel projects but also have introduced incentives to vendors that produce biofuels. Currently, biodiesel production from microalgal biomass has drawn an immense importance with the potential to exclude high-quality agricultural land use and food safe-keeping issues. Moreover, microalgae can grow in seawater or wastewater and microalgal oil can exceed 50-60% (dry cell weight) as compared with some best agricultural oil crops of only 5-10% oil content. Globally, microalgae are the highest biomass producers and neutral lipid accumulators contending any other terrestrial oil crops. However, there remain many hurdles in each and every step, starting from strain selection and lipid accumulation/yield, algae mass cultivation followed by the downstream processes such as harvesting, drying, oil extraction, and biodiesel conversion (transesterification), and overall, the cost of production. Isolation and screening of oleaginous microalgae is one pivotal important upstream factor which should be addressed according to the need of freshwater or marine algae with a consideration that wild-type indigenous isolate can be the best suited for the laboratory to large scale exploitation. Nowadays, a large number of literature on microalgal biodiesel production are available, but none of those illustrate a detailed step-wise description with the pros and cons of the upstream and downstream processes of biodiesel production from microalgae. Specifically, harvesting and drying constitute more than 50% of the total production costs; however, there are quite a less number

  20. Use of waste materials for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Vitiello, R.; Tesser, R.; Di Serio, M.; Santacesaria, E. [Napoli Univ. (Italy). Dipt. di Scienze Chimiche; Buonerba, A.; Grassi, A. [Salerno Univ. (Italy). Dipt. di Chimica e Biologia

    2012-07-01

    Waste raw materials obtained by several sources of both food and agro industries could be considered for biofuel production. In the last years, this topic has growing in interest. At this purpose, our research, has been focused on the development of new technologies to obtain biodiesel from the mentioned wastes feedstock. In particular from oleins, that are mixtures of free fatty acids (FFAs) and triglycerides. Therefore, we are studying the way to produce biodiesel in two steps: an esterification reaction of FFAs with glycerol and a transesterification with methanol of the whole mixture. The esterification of FFAs with glycerol has the advantage of using a relatively high temperature favouring the stripping of water formed during the esterification. In this way esterification equilibrium is shifted to the right. Then, the mixture of mono-, di- and triglycerides, obtained by esterification with glycerol, can be submitted to transesterification with methanol, in the usual way, to produce biodiesel Catalysts promoting esterification, normally, are mineral acids or heterogeneous Bronsted acid catalysts. At this purpose, the classical sulphonated polystyrene acid resins cannot be used at temperature greater than 120 C. Therefore, a new class of sulfonated polymers, with enhanced temperature resistance, has been developed by selective and quantitative sulfonation of olefinic butadiene units in multiblock copolymers syndiotactic polystyrene-co-1,4-cis-polybutadiene. This catalytic system has been successfully tested in the above mentioned esterification reaction and compared to classic commercial strong acid catalysts like Amberlyst {sup registered}, Nafion {sup registered} and sulfuric acid. (orig.)

  1. Production of Biodiesel from Vegetable Oil Using Microware Irradiation

    OpenAIRE

    N. Kapilan

    2012-01-01

    The petroleum oil supply crisis, the increase in demand and the price eruption have led to a search for an alternative fuel of bio-origin in India. Among the alternative fuels, biodiesel is considered as a sustainable renewable alternative fuel to fossil diesel. Non-edible jatropha oil has considerable potential for the production of biodiesel in India. The production of biodiesel from jatropha oil using a conventional heating method takes more than 1h. In this work, microwave irradiation has...

  2. Solid Catalysts and theirs Application in Biodiesel Production

    OpenAIRE

    Ramli Mat; Rubyatul Adawiyah Samsudin; Mahadhir Mohamed; Anwar Johari

    2012-01-01

    The reduction of oil resources and increasing petroleum price has led to the search for alternative fuel from renewable resources such as biodiesel. Currently biodiesel is produced from vegetable oil using liquid catalysts. Replacement of liquid catalysts with solid catalysts would greatly solve the problems associated with expensive separation methods and corrosion problems, yielding to a cleaner product and greatly decreasing the cost of biodiesel production. In this paper, the development ...

  3. Environmental sustainability assessment of palm biodiesel production in Thailand

    International Nuclear Information System (INIS)

    The study assesses the environmental sustainability of palm biodiesel production systems in Thailand by focusing on their energy efficiency and environmental impact potentials. The Net Energy Balance (NEB) and Renewability indicate energy gain for palm biodiesel and its co-products as compared to fossil energy inputs. In addition, life cycle assessment also reveals lower values of environmental impact potentials of biodiesel as compared to conventional diesel. For example, palm biodiesel can provide greenhouse gas (GHG) reduction of around 46–73% as compared to diesel. Nitrogen-fertilizer production and application in the plantation and the air emissions from the ponds treating palm oil mill effluent (POME) are found to be the major environmental aspects. However, the energy and environmental performances depend on various factors such as the management efficiency of empty fruit bunches (EFB) and POME and the possible land-use change in the future. Recommendations are made for improving environmental performance of palm biodiesel and for securing the long-term availability of crude palm oil supply with a view towards sustainable palm biodiesel production. -- Highlights: ► Environmental sustainability of palm biodiesel production in Thailand is assessed. ► Palm biodiesel can provide GHG reduction of around 46–73% as compared to diesel. ► Net energy ratio and renewability of palm biodiesel both range between 2 and 4. ► Efficient use of by-products in the value chain enhances environmental benefits.

  4. Biodiesel production from palm oil

    Directory of Open Access Journals (Sweden)

    Kiatsimkul, P.

    2001-11-01

    Full Text Available Methyl ester was produced from many sources of oil palm products, namely used frying oil, RBD palm oil, degummed and deacidified palm oil, palm stearin and superhard palm stearin. Production process was a conventional transesterification batch process using methanol as reactant and sodium hydroxide as catalyst. Production procedure consisted of oil preparation, solvent preparation, reaction step, glycerol separation, washing step and finishing step. Thin layer chromatograph was used to determine the composition of product and nearly 100% methyl ester was obtained at a suitable condition. Molar ratio of oil: methanol was about 1:6, which equal to 20% by weight of methanol. Sodium hydroxide was 0.5-1 %wt. of oil. The production temperature was 60-80ºC, mixing time was only 15-30 minutes and reaction time was 3-4 hours. Many fuel properties of methyl ester were very close to high-speed diesel such as viscosity, density, heating value and boiling point range. Pour point of methyl ester was higher than diesel owing to the high composition of saturated methyl ester that has a high melting point.

  5. Biodiesel production from sediments of a eutrophic reservoir

    International Nuclear Information System (INIS)

    Sediments from eutrophic reservoir Bugach (Siberia, Russia) were tested for possibility to produce biodiesel. We supposed that the sediments could be a promising biodiesel producer. The major reason of high price of biodiesel fuel is cost of a raw material. The use of dredging sediments for biodiesel production reduces production costs, because the dredging sediments are by-products which originated during lake restoration actions, and are free of cost raw materials. Lipid content in sediments was 0.24% of dry weight. To assess the potential of from sediments as a substitute of diesel fuel, the properties of the biodiesel such as cetane number, iodine number and heat of combustion were calculated. All of this parameters complied with limits established by EN 14214 and EN 14213 related to biodiesel quality. -- Highlights: → Dredging sediments were considered as a new feedstock for biodiesel production. → Lipid and fatty acid content in the sediments were determined. → Main properties of the biodiesel were calculated basing on fatty acid composition. → The properties well complied with limits established in biodiesel standards.

  6. A First Law Thermodynamic Analysis of Biodiesel Production from Soybean

    Science.gov (United States)

    Patzek, Tad W.

    2009-01-01

    A proper First Law energy balance of the soybean biodiesel cycle shows that the overall efficiency of biodiesel production is 0.18, i.e., only 1 in 5 parts of the solar energy sequestered as soya beans, plus the fossil energy inputs, becomes biodiesel. Soybean meal is produced with an overall energetic efficiency of 0.38, but it is not a fossil…

  7. BiodieselFAO: An Integrated Decision Support System for Investment Analysis in the Biodiesel Production Chain

    Directory of Open Access Journals (Sweden)

    Aziz Galvão da Silva Júnior

    2015-06-01

    Full Text Available In the short and medium terms, biofuels are the most viable alternative to reduce the environmental impact of fossil fuels. The recent controversy over the competition between biofuels and food production increases the complexity of investment decisions in the biodiesel production chain. In this context, decision support tools are highly relevant. The purpose of this article is to describe the BiodieselFAO using the Unified Modeling Language (UML. An integrated analysis considering both agricultural and industrial sectors was identified as a key requirement to the system. Therefore, farmers and industry are the main actors in the use case diagram. As the raw material represents around 70% of the industrial cost of biodiesel production, the price negotiation of raw material (oilseeds is the central use case. Configuration, agriculture, industry, results and scenarios are the modules, which encompass the functionalities derived from the UML diagrams. The Food and Agriculture Organization of the United Nations (FAO has made the BiodieselFAO available, free of charge, to around 180 professionals from 17 Latin American countries. Additionally, the developing team has supported the usage of the BiodieselFAO in several biodiesel investment analyses throughout Latin America. The system was also useful in the design and analysis of policy related to biodiesel industry in Brazil.

  8. BiodieselFAO: An Integrated Decision Support System for Investment Analysis in the Biodiesel Production Chain

    OpenAIRE

    Aziz Galvão da Silva Júnior

    2015-01-01

    In the short and medium terms, biofuels are the most viable alternative to reduce the environmental impact of fossil fuels. The recent controversy over the competition between biofuels and food production increases the complexity of investment decisions in the biodiesel production chain. In this context, decision support tools are highly relevant. The purpose of this article is to describe the BiodieselFAO using the Unified Modeling Language (UML). An integrated analysis considering both agri...

  9. Social and techno-economical analysis of biodiesel production in Peru

    International Nuclear Information System (INIS)

    Peru has introduced a law to promote the use of biofuels with the objective to increase employment, strengthening agriculture development, providing an economic alternative to illegal drug production. In this work, the costs of biodiesel production from oil palm and Jatropha were analyzed under different scenarios. They include the participation of associations of smallholders and commercial producers as raw material provides in biodiesel business in Peru. The scenarios considered have a strong social dimension in which they explicitly consider how productions' costs change when smallholders supply a proportion of the feedstock to the industry. Production cost profiles were generated using the chemical process simulation and economical evaluation software packages provided by Aspen Technology. Total production cost found for oil palm biodiesel production ranged between 0.23 and 0.31 USD/L and Jatropha biodiesel production costs were between 0.84 and 0.87 USD/L. These production costs were analyzed and compared to biodiesel ex-factory prices and diesel fuel production cost factors. The results suggest that including smallholders in the supply chain can be under some conditions competitive with liquid biofuel production systems that are purely large scale. - Highlights: ► We design and simulate biodiesel production schemes based on oil palm and Jatropha. ► Scenarios consider smallholders and commercial producers combinations. ► Inclusion of by-product selling allows a reduction of 30% in total biodiesel production cost. ► Major inclusion of smallholders requires a strong government policy to improve their technical production conditions.

  10. Overview on the current trends in biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Yusuf, N.N.A.N. [Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Kamarudin, S.K., E-mail: ctie@eng.ukm.m [Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Yaakub, Z. [Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia)

    2011-07-15

    Research highlights: {yields} Various method for the production of biodiesel from vegetable oil were reviewed. {yields} Such as direct use and blending, microemulsion, pyrolysis and transesterification. {yields} The advantages and disadvantages of the different biodiesel-production methods are also discussed. {yields} Finally, the economics of biodiesel production was discussed using Malaysia as a case study. -- Abstract: The finite nature of fossil fuels necessitates consideration of alternative fuels from renewable sources. The term biofuel refers to liquid, gas and solid fuels predominantly produced from biomass. Biofuels include bioethanol, biomethanol, biodiesel and biohydrogen. Biodiesel, defined as the monoalkyl esters of vegetable oils or animal fats, is an attractive alternative fuel because it is environmentally friendly and can be synthesized from edible and non-edible oils. Here, we review the various methods for the production of biodiesel from vegetable oil, such as direct use and blending, microemulsion, pyrolysis and transesterification. The advantages and disadvantages of the different biodiesel-production methods are also discussed. Finally, we analyze the economics of biodiesel production using Malaysia as a case study.

  11. Cottonseed oil for biodiesel production; Oleo de algodao para a producao de biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Pighinelli, Anna L.M.T.; Park, Kil J. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)], E-mail: annalets@feagri.unicamp.br; Ferrari, Roseli A.; Miguel, Ana M.R.O. [Instituto de Tecnologia de Alimentos (ITAL), Campinas, SP (Brazil)], Emails: roseliferrari@ital.sp.gov.br, anarauen@ital.sp.gov.br, kil@feagri.unicamp.br

    2009-07-01

    Crude cottonseed oil is an alternative for biodiesel production, mostly in Mato Grosso State, where its production is the biggest of Brazil. Even being an acid oil, esterification reaction, followed by transesterification, could make possible the biodiesel production. In this study, crude cottonseed oil obtained from expelled process was reacted to evaluate molar ration and catalyst concentration effects in biodiesel yield. Molar ratio varied from 3 to 15 moles of ethanol to 1 mol of oil, and catalyst, from 1 to 5% by oil mass. Statistic analysis showed that none of studied variables was significant, for the values range. Biodiesel yield had a maximum of 88%, for molar ratio of 4.7 and 4.42% of catalyst concentration. A combination of oil with high free fatty acid content and ethanol as alcohol, affected the separation between esters and glycerol. (author)

  12. Genomic Prospecting for Microbial Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Lykidis, Athanasios; Lykidis, Athanasios; Ivanova, Natalia

    2008-03-20

    Biodiesel is defined as fatty acid mono-alkylesters and is produced from triacylglycerols. In the current article we provide an overview of the structure, diversity and regulation of the metabolic pathways leading to intracellular fatty acid and triacylglycerol accumulation in three types of organisms (bacteria, algae and fungi) of potential biotechnological interest and discuss possible intervention points to increase the cellular lipid content. The key steps that regulate carbon allocation and distribution in lipids include the formation of malonyl-CoA, the synthesis of fatty acids and their attachment onto the glycerol backbone, and the formation of triacylglycerols. The lipid biosynthetic genes and pathways are largely known for select model organisms. Comparative genomics allows the examination of these pathways in organisms of biotechnological interest and reveals the evolution of divergent and yet uncharacterized regulatory mechanisms. Utilization of microbial systems for triacylglycerol and fatty acid production is in its infancy; however, genomic information and technologies combined with synthetic biology concepts provide the opportunity to further exploit microbes for the competitive production of biodiesel.

  13. Moringa oleifera oil: Studies of characterization and biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    da Silva, Jhosianna P.V.; Serra, Tatiana M.; Meneghetti, Simoni M.P. [Universidade Federal de Alagoas, Instituto de Quimica e Biotecnologia, Laboratorio de Oleoquimica, Maceio, Alagoas, CEP 57072-970 (Brazil); Gossmann, Marcelo; Wolf, Carlos R.; Meneghetti, Mario R. [Universidade Luterana do Brasil, Instituto de Quimica, Canoas, Rio Grande do Sul, CEP 92420-280 (Brazil)

    2010-10-15

    This work describes studies with the seeds of Moringa oleifera (MO), obtained in the northeast of Brazil, evaluating some properties and chemical composition of the oil, as well any potential application in biodiesel production. The studied physicochemical properties of the MO biodiesel, suggest that this material may be used as fuel in diesel engines, mainly as a mixture to petrodiesel. (author)

  14. Biodiesel production from waste frying oils and its quality control.

    Science.gov (United States)

    Sabudak, T; Yildiz, M

    2010-05-01

    The use of biodiesel as fuel from alternative sources has increased considerably over recent years, affording numerous environmental benefits. Biodiesel an alternative fuel for diesel engines is produced from renewable sources such as vegetable oils or animal fats. However, the high costs implicated in marketing biodiesel constitute a major obstacle. To this regard therefore, the use of waste frying oils (WFO) should produce a marked reduction in the cost of biodiesel due to the ready availability of WFO at a relatively low price. In the present study waste frying oils collected from several McDonald's restaurants in Istanbul, were used to produce biodiesel. Biodiesel from WFO was prepared by means of three different transesterification processes: a one-step base-catalyzed, a two-step base-catalyzed and a two-step acid-catalyzed transesterification followed by base transesterification. No detailed previous studies providing information for a two-step acid-catalyzed transesterification followed by a base (CH(3)ONa) transesterification are present in literature. Each reaction was allowed to take place with and without tetrahydrofuran added as a co-solvent. Following production, three different procedures; washing with distilled water, dry wash with magnesol and using ion-exchange resin were applied to purify biodiesel and the best outcome determined. The biodiesel obtained to verify compliance with the European Standard 14214 (EN 14214), which also corresponds to Turkish Biodiesel Standards. PMID:20100653

  15. Rapid biodiesel production using wet microalgae via microwave irradiation

    International Nuclear Information System (INIS)

    Highlights: • Lipid was directly extracted from wet microalgae using microwave irradiation. • The microwave irradiation and water bath-assisted solvent extraction are applied. • Cell walls are significantly disrupted under microwave irradiation. • Highly disrupted cell walls led to higher biodiesel yield in microwave irradiation. • Microwave irradiation is a promising direct technique with high biodiesel yields. - Abstract: The major challenges for industrial commercialized biodiesel production from microalgae are the high cost of downstream processing such as dewatering and drying, utilization of large volumes of solvent and laborious extraction processes. In order to address these issues the microwave irradiation method was used to produce biodiesel directly from wet microalgae biomass. This alternative method of biodiesel production from wet microalgae biomass is compared with the conventional water bath-assisted solvent extraction. The microwave irradiation extracted more lipids and high biodiesel conversion was obtained compared to the water bath-assisted extraction method due to the high cell disruption achieved and rapid transesterification. The total content of lipid extracted from microwave irradiation and water bath-assisted extraction were 38.31% and 23.01% respectively. The biodiesel produced using microwave irradiation was higher (86.41%) compared to the conventional method. Thus microwave irradiation is an attractive and promising technology to be used in the extraction and transesterification process for efficient biodiesel production

  16. Sustainable biocatalytic biodiesel production : A thermodynamic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Guezel, G.

    2012-09-15

    In the present thesis it was aimed at achieving thermodynamic analysis of reactions involved in enzymatic biodiesel production with specific focus on chemical and phase equilibria of reactive systems. Lipase-catalyzed biodiesel production (biocatalytic ethanolysis) presents significant advantages: Easy recovery of glycerol, no complex down-processing operations for elimination of catalyst and salt, and requires less organic solvent and lower energy consumption compared with conventional chemical methods. In overall, the major aims of this thesis were evaluating and subsequently finding feasible solutions to the questions emerged during the corresponding studies that have been performed worldwide. Some of the questions that were answered as appropriate as possible can be listed as follows: 1) What is the solubility of EtOH in vegetable oils and in FAEE blends and how does it change with temperature? 2) Is it possible to prevent denaturing impact of EtOH on biocatalysts? 3) What are the feedstock content (water and FFA) impacts on glycerol and EtOH miscibility with ester species? 4) Is it necessary removing glycerol by-product simultaneously? 5) Is it feasible providing monophasic or homogeneous reaction media that procure lower external mass transfer resistance? 6) What are the moisture absorption limits of FAAE species? 7) How are the interactions of reactive species in terms of miscibility/immiscibility phenomena? 8) Is it thermodynamically feasible providing monophasic reaction media? 9) How can LLE and VLE phase behaviors help to determine optimum reaction conditions? 10) How can the results of LLE and VLE studies be used so as to determine appropriate refining operations? (LN)

  17. An investigation of biodiesel production from wastes of seafood restaurants.

    Science.gov (United States)

    El-Gendy, Nour Sh; Hamdy, A; Abu Amr, Salem S

    2014-01-01

    This work illustrates a comparative study on the applicability of the basic heterogeneous calcium oxide catalyst prepared from waste mollusks and crabs shells (MS and CS, resp.) in the transesterification of waste cooking oil collected from seafood restaurants with methanol for production of biodiesel. Response surface methodology RSM based on D-optimal deign of experiments was employed to study the significance and interactive effect of methanol to oil M : O molar ratio, catalyst concentration, reaction time, and mixing rate on biodiesel yield. Second-order quadratic model equations were obtained describing the interrelationships between dependent and independent variables to maximize the response variable (biodiesel yield) and the validity of the predicted models were confirmed. The activity of the produced green catalysts was better than that of chemical CaO and immobilized enzyme Novozym 435. Fuel properties of the produced biodiesel were measured and compared with those of Egyptian petro-diesel and international biodiesel standards. The biodiesel produced using MS-CaO recorded higher quality than that produced using CS-CaO. The overall biodiesel characteristics were acceptable, encouraging application of CaO prepared from waste MS and CS for production of biodiesel as an efficient, environmentally friendly, sustainable, and low cost heterogeneous catalyst. PMID:25400665

  18. An Investigation of Biodiesel Production from Wastes of Seafood Restaurants

    Directory of Open Access Journals (Sweden)

    Nour Sh. El-Gendy

    2014-01-01

    Full Text Available This work illustrates a comparative study on the applicability of the basic heterogeneous calcium oxide catalyst prepared from waste mollusks and crabs shells (MS and CS, resp. in the transesterification of waste cooking oil collected from seafood restaurants with methanol for production of biodiesel. Response surface methodology RSM based on D-optimal deign of experiments was employed to study the significance and interactive effect of methanol to oil M : O molar ratio, catalyst concentration, reaction time, and mixing rate on biodiesel yield. Second-order quadratic model equations were obtained describing the interrelationships between dependent and independent variables to maximize the response variable (biodiesel yield and the validity of the predicted models were confirmed. The activity of the produced green catalysts was better than that of chemical CaO and immobilized enzyme Novozym 435. Fuel properties of the produced biodiesel were measured and compared with those of Egyptian petro-diesel and international biodiesel standards. The biodiesel produced using MS-CaO recorded higher quality than that produced using CS-CaO. The overall biodiesel characteristics were acceptable, encouraging application of CaO prepared from waste MS and CS for production of biodiesel as an efficient, environmentally friendly, sustainable, and low cost heterogeneous catalyst.

  19. Superstructure optimization of biodiesel production from microalgal biomass

    DEFF Research Database (Denmark)

    Rizwan, Muhammad; Lee, Jay H.; Gani, Rafiqul

    2013-01-01

    In this study, we propose a mixed integer nonlinear programming (MINLP) model for superstructure based optimization of biodiesel production from microalgal biomass. The proposed superstructure includes a number of major processing steps for the production of biodiesel from microalgal biomass...... for the production of biodiesel from microalgae. The proposed methodology is tested by implementing on a specific case study. The MINLP model is implemented and solved in GAMS using a database built in Excel. The results from the optimization are analyzed and their significances are discussed....

  20. Market penetration of biodiesel

    OpenAIRE

    Kenneth R. Szulczyk, Bruce A. McCarl

    2010-01-01

    This research examines in detail the technology and economics of substituting biodiesel for diesel #2. This endeavor examines three areas. First, the benefits of biodiesel are examined, and the technical problems of large-scale implementation. Second, the biodiesel production possibilities are examined for soybean oil, corn oil, tallow, and yellow grease, which are the largest sources of feedstocks for the United States. Examining in detail the production possibilities allows to identity the ...

  1. Utilization of Biodiesel By-Products for Biogas Production

    Directory of Open Access Journals (Sweden)

    Nina Kolesárová

    2011-01-01

    Full Text Available This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

  2. Current Status and Prospects of Biodiesel Production from Microalgae

    Directory of Open Access Journals (Sweden)

    Yuhuan Liu

    2012-07-01

    Full Text Available Microalgae represent a sustainable energy source because of their high biomass productivity and ability to remove air and water born pollutants. This paper reviews the current status of production and conversion of microalgae, including the advantages of microalgae biodiesel, high density cultivation of microalgae, high-lipid content microalgae selection and metabolic control, and innovative harvesting and processing technologies. The key barriers to commercial production of microalgae biodiesel and future perspective of the technologies are also discussed.

  3. High Lipid Induction in Microalgae for Biodiesel Production

    OpenAIRE

    Schenk, Peer M.; Sharma, Kalpesh K.; Holger Schuhmann

    2012-01-01

    Oil-accumulating microalgae have the potential to enable large-scale biodiesel production without competing for arable land or biodiverse natural landscapes. High lipid productivity of dominant, fast-growing algae is a major prerequisite for commercial production of microalgal oil-derived biodiesel. However, under optimal growth conditions, large amounts of algal biomass are produced, but with relatively low lipid contents, while species with high lipid contents are typically slow growing. Ma...

  4. Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Bambang Tri Nugroho

    2009-06-01

    Full Text Available Biodiesel production has received considerable attention in the recent past as a renewable fuel. The production of biodiesel by conventional transesterification process employs alkali or acid catalyst and has been industrially accepted for its high conversion and reaction rates. However for alkali catalyst, there may be risk of free acid or water contamination and soap formation is likely to take place which makes the separation process difficult. Although yield is high, the acids, being corrosive, may cause damage to the equipment and the reaction rate was also observed to be low. This research focuses on empirical modeling and optimization for the biodiesel production over plasma reactor. The plasma reactor technology is more promising than the conventional catalytic processes due to the reducing reaction time and easy in product separation. Copyright (c 2009 by BCREC. All Rights reserved.[Received: 10 August 2009, Revised: 5 September 2009, Accepted: 12 October 2009][How to Cite: I. Istadi, D.D. Anggoro, P. Marwoto, S. Suherman, B.T. Nugroho (2009. Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology. Bulletin of Chemical Reaction Engineering and Catalysis, 4(1: 23-31. doi:10.9767/bcrec.4.1.23.23-31][How to Link/ DOI: http://dx.doi.org/10.9767/bcrec.4.1.23.23-31

  5. Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Istadi Istadi

    2009-06-01

    Full Text Available Biodiesel production has received considerable attention in the recent past as a renewable fuel. The production of biodiesel by conventional transesterification process employs alkali or acid catalyst and has been industrially accepted for its high conversion and reaction rates. However for alkali catalyst, there may be risk of free acid or water contamination and soap formation is likely to take place which makes the separation process difficult. Although yield is high, the acids, being corrosive, may cause damage to the equipment and the reaction rate was also observed to be low. This research focuses on empirical modeling and optimization for the biodiesel production over plasma reactor. The plasma reactor technology is more promising than the conventional catalytic processes due to the reducing reaction time and easy in product separation. Copyright (c 2009 by BCREC. All Rights reserved.[Received: 10 August 2009, Revised: 5 September 2009, Accepted: 12 October 2009][How to Cite: I. Istadi, D.D. Anggoro, P. Marwoto, S. Suherman, B.T. Nugroho (2009. Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology. Bulletin of Chemical Reaction Engineering and Catalysis, 4(1: 23-31.  doi:10.9767/bcrec.4.1.7115.23-31][How to Link/ DOI: http://dx.doi.org/10.9767/bcrec.4.1.7115.23-31 || or local: http://ejournal.undip.ac.id/index.php/bcrec/article/view/7115

  6. Biodiesel production--current state of the art and challenges.

    Science.gov (United States)

    Vasudevan, Palligarnai T; Briggs, Michael

    2008-05-01

    Biodiesel is a clean-burning fuel produced from grease, vegetable oils, or animal fats. Biodiesel is produced by transesterification of oils with short-chain alcohols or by the esterification of fatty acids. The transesterification reaction consists of transforming triglycerides into fatty acid alkyl esters, in the presence of an alcohol, such as methanol or ethanol, and a catalyst, such as an alkali or acid, with glycerol as a byproduct. Because of diminishing petroleum reserves and the deleterious environmental consequences of exhaust gases from petroleum diesel, biodiesel has attracted attention during the past few years as a renewable and environmentally friendly fuel. Since biodiesel is made entirely from vegetable oil or animal fats, it is renewable and biodegradable. The majority of biodiesel today is produced by alkali-catalyzed transesterification with methanol, which results in a relatively short reaction time. However, the vegetable oil and alcohol must be substantially anhydrous and have a low free fatty acid content, because the presence of water or free fatty acid or both promotes soap formation. In this article, we examine different biodiesel sources (edible and nonedible), virgin oil versus waste oil, algae-based biodiesel that is gaining increasing importance, role of different catalysts including enzyme catalysts, and the current state-of-the-art in biodiesel production.

  7. Prospects of biodiesel production from microalgae in India

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Shakeel A.; Hussain, Mir Z.; Prasad, S. [Division of Environmental Sciences, Indian Agricultural Research Institute, New Delhi 110012 (India); Rashmi; Banerjee, U.C. [Department of Pharmaceutical Technology (Biotechnology), National Institute of Pharmaceutical and Education Research (NIPER), Sector 67, Phase X, S.A.S. Nagar, Mohali 160062, Punjab (India)

    2009-12-15

    Energy is essential and vital for development, and the global economy literally runs on energy. The use of fossil fuels as energy is now widely accepted as unsustainable due to depleting resources and also due to the accumulation of greenhouse gases in the environment. Renewable and carbon neutral biodiesel are necessary for environmental and economic sustainability. Biodiesel demand is constantly increasing as the reservoir of fossil fuel are depleting. Unfortunately biodiesel produced from oil crop, waste cooking oil and animal fats are not able to replace fossil fuel. The viability of the first generation biofuels production is however questionable because of the conflict with food supply. Production of biodiesel using microalgae biomass appears to be a viable alternative. The oil productivity of many microalgae exceeds the best producing oil crops. Microalgae are photosynthetic microorganisms which convert sunlight, water and CO{sub 2} to sugars, from which macromolecules, such as lipids and triacylglycerols (TAGs) can be obtained. These TAGs are the promising and sustainable feedstock for biodiesel production. Microalgal biorefinery approach can be used to reduce the cost of making microalgal biodiesel. Microalgal-based carbon sequestration technologies cover the cost of carbon capture and sequestration. The present paper is an attempt to review the potential of microalgal biodiesel in comparison to the agricultural crops and its prospects in India. (author)

  8. Production of Biodiesel from Vegetable Oil Using Microware Irradiation

    Directory of Open Access Journals (Sweden)

    N. Kapilan

    2012-01-01

    Full Text Available The petroleum oil supply crisis, the increase in demand and the price eruption have led to a search for an alternative fuel of bio-origin in India. Among the alternative fuels, biodiesel is considered as a sustainable renewable alternative fuel to fossil diesel. Non-edible jatropha oil has considerable potential for the production of biodiesel in India. The production of biodiesel from jatropha oil using a conventional heating method takes more than 1h. In this work, microwave irradiation has been used as a source of heat for the transesterification reaction. A domestic microwave oven was modified and used for microwave heating of the reactants. The time taken for biodiesel production using microwave irradiation was 1 min. The fuel property analysis shows that the properties of jatropha oil biodiesel satisfy the biodiesel standards, and are close to the fossil diesel standards. From this work, it is concluded that biodiesel can be produced from vegetable oil using microwave irradiation, with a significant reduction in production time.

  9. Biodiesel Fuel Production from Algae as Renewable Energy

    Directory of Open Access Journals (Sweden)

    A. B.M. Sharif Hossain

    2008-01-01

    Full Text Available Biodiesel is biodegradable, less CO2 and NOx emissions. Continuous use of petroleum sourced fuels is now widely recognized as unsustainable because of depleting supplies and the contribution of these fuels to the accumulation of carbon dioxide in the environment. Renewable, carbon neutral, transport fuels are necessary for environmental and economic sustainability. Algae have emerged as one of the most promising sources for biodiesel production. It can be inferred that algae grown in CO2-enriched air can be converted to oily substances. Such an approach can contribute to solve major problems of air pollution resulting from CO2 evolution and future crisis due to a shortage of energy sources. This study was undertaken to know the proper transesterification, amount of biodiesel production (ester and physical properties of biodiesel. In this study we used common species Oedogonium and Spirogyra to compare the amount of biodiesel production. Algal oil and biodiesel (ester production was higher in Oedogonium than Spirogyra sp. However, biomass (after oil extraction was higher in Spirogyra than Oedogonium sp. Sediments (glycerine, water and pigments was higher in Spirogyra than Oedogonium sp. There was no difference of pH between Spirogyra and Oedogonium sp. These results indicate that biodiesel can be produced from both species and Oedogonium is better source than Spirogyra sp.

  10. Production of biodiesel using lipase encapsulated in κ-carrageenan

    CERN Document Server

    Ravindra, Pogaku

    2015-01-01

    This book explores a novel technique for processing biodiesel using lipase immobilization by encapsulation and its physical properties, stability characteristics, and application in stirred tank and re-circulated packed bed immobilized reactors for biodiesel production. The enzymatic processing of biodiesel addresses many of the problems associated with chemical processing. It requires only moderate operating conditions and yields a high-quality product with a high level of conversion and the life cycle assessment of enzymatic biodiesel production has more favourable environmental consequences. The chemical processing problems of waste water treatment are lessened and soap formation is not an issue, meaning that waste oil with higher FFA can be used as the feedstock. The by product glycerol does not require any purification and it can be sold at higher price. However, soluble enzymatic processing is not perfect. It is costly, the enzyme cannot be recycled and its removal from the product is difficult. For...

  11. Transesterification of Palm Oil for the Production of Biodiesel

    Directory of Open Access Journals (Sweden)

    Khalizani Khalid

    2011-01-01

    Full Text Available Problem statement: Palm oil is known as an important source of edible oil with significant values of renewable energy. Depletion of petroleum had captured much attention on producing biodiesel from the palm oil. Approach: The most concerning methods for the production of biodiesel were discussed, namely transesterification (alkali and acid, enzymetic approach and supercritical alcohol. Results: The results showed the vis-a-vis of the methods for possible consideration of research. Conclusion: Concerning the importance of this vegetable oil, the contribution of palm oil towards diminution of fossil fuel, possible methods for the production of biodiesel and the opportunity for the futures is very much important.

  12. Sustaining Biodiesel Production via Value-Added Applications of Glycerol

    Directory of Open Access Journals (Sweden)

    Omotola Babajide

    2013-01-01

    Full Text Available The production of biofuels worldwide has been significant lately due to the shift from obtaining energy from nonrenewable energy (fossil fuels to renewable sources (biofuels. This energy shift arose as a result of the disturbing crude petroleum price fluctuations, uncertainties about fossil fuel reserves, and greenhouse gas (GHG concerns. With the production of biofuels increasing considerably and the current global biodiesel production from different feedstock, reaching about 6 billion liters per year, biodiesel production costs have been highly dependent on feedstock prices, ranging from 70 to 25; of total production costs, and in comparison with the conventional diesel fuel, the biodiesel is currently noncompetitive. An efficient production process is, therefore, crucial to lowering biodiesel production costs. The question of sustainability, however, arises, taking into account the African diverse conditions and how vital concerns need to be addressed. The major concern about biodiesel production costs can be reduced by finding value-added applications for its glycerol byproduct. This paper, thus, provides an overview of current research trends that could overcome the major hurdles towards profitable commercialization of biodiesel and also proposes areas of opportunity probable to capitalize the surplus glycerol obtained, for numerous applications.

  13. Process intensification technologies for biodiesel production reactive separation processes

    CERN Document Server

    Kiss, A A

    2014-01-01

    This book is among the first to address the novel process intensification technologies for biodiesel production, in particular the integrated reactive separations. It provides a comprehensive overview illustrated with many industrially relevant examples of novel reactive separation processes used in the production of biodiesel (e.g. fatty acid alkyl esters): reactive distillation, reactive absorption, reactive extraction, membrane reactors, and centrifugal contact separators. Readers will also learn about the working principles, design and control of integrated processes, while also getting a

  14. Market penetration of biodiesel

    Directory of Open Access Journals (Sweden)

    Kenneth R. Szulczyk, Bruce A. McCarl

    2010-01-01

    Full Text Available This research examines in detail the technology and economics of substituting biodiesel for diesel #2. This endeavor examines three areas. First, the benefits of biodiesel are examined, and the technical problems of large-scale implementation. Second, the biodiesel production possibilities are examined for soybean oil, corn oil, tallow, and yellow grease, which are the largest sources of feedstocks for the United States. Examining in detail the production possibilities allows to identity the extent of technological change, production costs, byproducts, and greenhouse gas (GHG emissions. Finally, a U.S. agricultural model, FASOMGHG was used to predict market penetration of biodiesel, given technological progress, variety of technologies and feedstocks, market interactions, energy prices, and carbon dioxide equivalent prices. FASOMGHG has several interesting results. First, diesel fuel prices have an expansionary impact on the biodiesel industry. The higher the diesel fuel prices, the more biodiesel is produced. However, given the most favorable circumstances, the maximum biodiesel market penetration is 9% in 2030 with a wholesale diesel price of $4 per gallon. Second, the two dominant sources of biodiesel are from corn and soybeans. Sources like tallow and yellow grease are more limited, because they are byproducts of other industries. Third, GHG prices have an expansionary impact on the biodiesel prices, because biodiesel is quite GHG efficient. Finally, U.S. government subsidies on biofuels have an expansionary impact on biodiesel production, and increase market penetration at least an additional 3%.

  15. Bio-diesel fuels production: Feasibility studies

    International Nuclear Information System (INIS)

    This paper reviews the efforts being made by Italy's national government and private industry to develop diesel engine fuels derived from vegetable oils, in particular, sunflower seed oil. These fuels are being promoted in Italy from the environmental protection stand-point in that they don't contain any sulfur, the main cause of acid rain, and from the agricultural stand-point in that they provide Italian farmers, whose food crop production capacity is limited due to European Communities agreements, with the opportunity to use their set-aside land for the production of energy crops. This paper provides brief notes on the key performance characteristics of bio-diesel fuels, whose application doesn't require any modifications to diesel engines, apart from minor adjustments to the air/fuel mix regulating system, and assesses commercialization prospects. Brief mention is made of the problems being encountered by the Government in the establishing fair bio-fuel production tax rebates which are compatible with the marketing practices of the petroleum industry. One of the strategies being considered is to use the bio-fuels as additives to be mixed with conventional fuel oils so as to derive a fuel which meets the new European air pollution standards

  16. Methanolysis of Carica papaya Seed Oil for Production of Biodiesel

    Directory of Open Access Journals (Sweden)

    Foluso O. Agunbiade

    2014-01-01

    Full Text Available The future of fossil fuel sources of energy has necessitated the need to search for renewable alternatives. Thus, Carica papaya seed oil (CPSO was employed as feedstock for the production of biodiesel by methanolysis. The seed was obtained locally, dried, and extracted with n-hexane. The CPSO was analyzed for specific gravity, viscosity, iodine value, and saponification value, among others using standard methods. The oil was transesterified by two-stage catalysis with oil to methanol mole ratio of 1 : 9. The biodiesel produced was subjected to standard fuel tests. The seed has an oil yield of 31.2% which is commercially viable. The kinematic viscosity of the oil at 313 K was 27.4 mm2s−1 while that of Carica papaya oil methylester (CPOME was reduced to 3.57 mm2s−1 and the specific gravity was 0.84 comparable with other seed-oil biodiesels and number 2 diesel. Other oil properties were compared favourably with seed oils already documented for biodiesel synthesis. CPOME’s cloud and pour points were 275 K and 274 K, respectively, and relatively higher than other biodiesels and number 2 diesel. CPOME exhibits moderate corrosion of copper strip. The methanolysis improved the fuel properties of the CPOME similar to other biodiesels. CPSO therefore exhibits a potential for biodiesel production.

  17. Reuse of rapeseed by-products from biodiesel production

    OpenAIRE

    Tajana Krička; Ana Matin; Neven Voća; Vanja Jurišić; Nikola Bilandžija

    2015-01-01

    The objective of this paper is to investigate usability of rapeseed cake from biodiesel fuel production as an energy source. For this research, rapeseed was grown at the research site of the Faculty of Agriculture in Zagreb, Croatia. The investigated rapeseed cake, residue from cold pressing, was divided in two groups of samples. The first group was a mix of three varieties (Bristol, Express and Navajo), while the other group consisted of three hybrids (Artus, Baldur, Titan). The utilization ...

  18. Sustainable and Intensified Design of a Biodiesel Production Process

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Ismail, Muhammad I.; Babi, Deenesh Kavi;

    impact and maximum profitability is needed. In this work a computer-aided framework for process synthesis and process intensification is applied for sustainable production of biodiesel from pure/waste palm oil as the feedstock. This approach examines several biodiesel processing routes that were...... collected through available data and current technologies reported in the literature. Using this information, a generic superstructure of processing routes was created that described a network of configurations representing multiple designs for the production of biodiesel. Therefore, based on the currently...... of economic and environmental sustainability was identified. For the case of biodiesel production, the intensified process alternative turned out to be the most economical and more sustainable than other alternatives. The computer-aided methods and tools used in this work are: SustainPro (method and tool...

  19. Biodiesel production from low cost and renewable feedstock

    Science.gov (United States)

    Gude, Veera; Grant, Georgene; Patil, Prafulla; Deng, Shuguang

    2013-12-01

    Sustainable biodiesel production should: a) utilize low cost renewable feedstock; b) utilize energy-efficient, nonconventional heating and mixing techniques; c) increase net energy benefit of the process; and d) utilize renewable feedstock/energy sources where possible. In this paper, we discuss the merits of biodiesel production following these criteria supported by the experimental results obtained from the process optimization studies. Waste cooking oil, non-edible (low-cost) oils (Jatropha curcas and Camelina Sativa) and algae were used as feedstock for biodiesel process optimization. A comparison between conventional and non-conventional methods such as microwaves and ultrasound was reported. Finally, net energy scenarios for different biodiesel feedstock options and algae are presented.

  20. Biodiesel Production from Rubber Seed Oil via Esterification Process

    Directory of Open Access Journals (Sweden)

    W Widayat

    2012-07-01

    Full Text Available One promise source of alternative energy is biodiesel from rubber seed oil, because the raw materials available in plentiful quantities and can be renewed. In addition, the rubber seed is still lack of utilization, and Indonesia is one of the largest rubbers producing country in the world. The objective of this research is to studied on biodiesel production by esterification process. Parameters used in this study are the ratio of catalyst and temperature and its influence on the characteristics of the resulting biodiesel product. Characterization of rubber seed include acid content number analysis, saponification numbers, density, viscosity, iodine number, type of free fatty acids and triglyceride oils. The results of analysis showed that rubber seed oil content obtained is 50.5%. The results of the GCMS analysis showed that a free fatty acid level in rubber seed is very high. Conversion into bio-diesel oil is obtained by at most 59.91% and lowest 48.24%.

  1. Biodiesel production from castor oil in Brazil: A difficult reality

    Energy Technology Data Exchange (ETDEWEB)

    Silva Cesar, Aldara da, E-mail: aldara@dep.ufscar.b [Federal University of Sao Carlos, Gepai - Grupo de Estudos e Pesquisas Agroindustriais, Departamento de Engenharia de Producao - UFSCar, Rodovia Washington Luis, km 235 - CEP 13565-905 - Sao Carlos - SP (Brazil); Otavio Batalha, Mario [Federal University of Sao Carlos, Gepai - Grupo de Estudos e Pesquisas Agroindustriais, Departamento de Engenharia de Producao - UFSCar, Rodovia Washington Luis, km 235 - CEP 13565-905 - Sao Carlos - SP (Brazil)

    2010-08-15

    The Brazilian National Program for Production and Use of Biodiesel (PNPB in Portuguese) has created a huge demand for biodiesel in Brazil. The PNPB is strongly based on social development through the inclusion of family farmers in projects integrated with biodiesel power plants. Among the various oilseeds, castor bean (Ricinus communis L.) was identified as the ideal one to promote social development in the semi-arid region. However, although promising, the mechanisms of the federal program are still insufficient to promote the effective participation of family farmers. This research shows that companies are facing huge problems in implementing contracts with family farmers. It describes and analyzes the functioning dynamics of this agro-production chain. This paper addresses the identification and the discussion of these obstacles, in order to increase the competitiveness of the biodiesel agribusiness chain, based on castor oil social projects in Brazil.

  2. Biodiesel production from castor oil in Brazil. A difficult reality

    Energy Technology Data Exchange (ETDEWEB)

    Silva Cesar, Aldara da; Otavio Batalha, Mario [Federal University of Sao Carlos, Gepai - Grupo de Estudos e Pesquisas Agroindustriais, Departamento de Engenharia de Producao - UFSCar, Rodovia Washington Luis, km 235 - CEP 13565-905 - Sao Carlos (Brazil)

    2010-08-15

    The Brazilian National Program for Production and Use of Biodiesel (PNPB in Portuguese) has created a huge demand for biodiesel in Brazil. The PNPB is strongly based on social development through the inclusion of family farmers in projects integrated with biodiesel power plants. Among the various oilseeds, castor bean (Ricinus communis L.) was identified as the ideal one to promote social development in the semi-arid region. However, although promising, the mechanisms of the federal program are still insufficient to promote the effective participation of family farmers. This research shows that companies are facing huge problems in implementing contracts with family farmers. It describes and analyzes the functioning dynamics of this agro-production chain. This paper addresses the identification and the discussion of these obstacles, in order to increase the competitiveness of the biodiesel agribusiness chain, based on castor oil social projects in Brazil. (author)

  3. PRELIMINARY DESIGN OF OSCILLATORY FLOW BIODIESEL REACTOR FOR CONTINUOUS BIODIESEL PRODUCTION FROM JATROPHA TRIGLYCERIDES

    Directory of Open Access Journals (Sweden)

    AZHARI T. I. MOHD. GHAZI

    2008-08-01

    Full Text Available The concept of a continuous process in producing biodiesel from jatropha oil by using an Oscillatory Flow Biodiesel Reactor (OFBR is discussed in this paper. It has been recognized that the batch stirred reactor is a primary mode used in the synthesis of biodiesel. However, pulsatile flow has been extensively researcehed and the fundamental principles have been successfully developed upon which its hydrodynamics are based. Oscillatory flow biodiesel reactor offers precise control of mixing by means of the baffle geometry and pulsation which facilitates to continuous operation, giving plug flow residence time distribution with high turbulence and enhanced mass and heat transfer. In conjunction with the concept of reactor design, parameters such as reactor dimensions, the hydrodynamic studies and physical properties of reactants must be considered prior to the design work initiated recently. The OFBR reactor design involves the use of simulation software, ASPEN PLUS and the reactor design fundamentals. Following this, the design parameters shall be applied in fabricating the OFBR for laboratory scale biodiesel production.

  4. Use of ionic liquids in biodiesel production: a review

    OpenAIRE

    ANDREANI, L; Rocha, J.D.

    2012-01-01

    This paper discusses the feasibility of the use of ionic liquids as catalysts in the biodiesel production field, describing some studies already published in the literature on this theme. Ionic liquids are regarded as a new generation of catalysts in the chemical industry, with several uses in different commercial segments. However only a few publications involving this topic can be found in the literature addressing the manufacture of biodiesel from vegetable oils or animal fats. Through the...

  5. Bioethanol production potential from Brazilian biodiesel co-products

    Energy Technology Data Exchange (ETDEWEB)

    Visser, Evan Michael; Filho, Delly Oliveira; Martins, Marcio Aredes [Departamento de Engenharia Agricola, Universidade Federal de Vicosa, Campus Universitario 36570-000 Vicosa, MG (Brazil); Steward, Brian L. [Department of Agricultural and Biosystems Engineering, Iowa State University, 214D Davidson Hall, Ames, IA 50011 (United States)

    2011-01-15

    One major problem facing the commercial production of cellulosic ethanol is the challenge of economically harvesting and transporting sufficient amounts of biomass as a feedstock at biorefinery plant scales. Oil extraction for biodiesel production, however, yields large quantities of biomass co-products rich in cellulose, sugar and starch, which in many cases may be sufficient to produce enough ethanol to meet the alcohol demands of the transesterification process. Soybean, castor bean, Jatropha curcas, palm kernel, sunflower and cottonseed were studied to determine ethanol production potential from cellulose found in the oil extraction co-products and also their capacity to meet transesterification alcohol demands. All crops studied were capable of producing enough ethanol for biodiesel production and, in the case of cottonseed, 470% of the transesterification demand could be met with cellulosic ethanol production from oil extraction co-products. Based on Brazilian yields of the crops studied, palm biomass has the highest potential ethanol yield of 108 m{sup 3} km{sup -2} followed by J. curcas with 40 m{sup 3} km{sup -2}. A total of 3.5 hm{sup 3} could be produced from Brazilian soybean oil extraction co-products. (author)

  6. Environmentally benign production of biodiesel using heterogeneous catalysts.

    Science.gov (United States)

    Hara, Michikazu

    2009-01-01

    Fuelling the future: The production of esters of higher fatty acids from plant materials is of great interest for the manufacture of biodiesel. Heterogeneous catalysts can provide new routes for the environmentally benign production of biodiesel. Particulate heterogeneous catalysts can be readily separated from products following reaction allowing the catalyst to be reused, generating less waste, and consuming less energy. Diesel engines are simple and powerful, and exhibit many advantages in energy efficiency and cost. Therefore, the production of higher fatty acid esters from plant materials has become of interest in recent years for the manufacture of biodiesel, a clean-burning alternative fuel. The industrial production of biodiesel mostly proceeds in the presence of "soluble" catalysts such as alkali hydroxides and liquid acids. A considerable amount of energy is required for the purification of products and catalyst separation, and furthermore these catalysts are not reusable. This process results in substantial energy wastage and the production of large amounts of chemical waste. Particulate heterogeneous catalysts can be readily separated from products following reaction, allowing the catalyst to be reused and consuming less energy. This Minireview describes the environmentally benign production of biodiesel using heterogeneous catalysts such as solid bases, acid catalysts, and immobilized enzymes. PMID:19180600

  7. Biodiesel production by enzyme-catalyzed transesterification

    Directory of Open Access Journals (Sweden)

    Stamenković Olivera S.

    2005-01-01

    Full Text Available The principles and kinetics of biodiesel production from vegetable oils using lipase-catalyzed transesterification are reviewed. The most important operating factors affecting the reaction and the yield of alkyl esters, such as: the type and form of lipase, the type of alcohol, the presence of organic solvents, the content of water in the oil, temperature and the presence of glycerol are discussed. In order to estimate the prospects of lipase-catalyzed transesterification for industrial application, the factors which influence the kinetics of chemically-catalysed transesterification are also considered. The advantages of lipase-catalyzed transesterification compared to the chemically-catalysed reaction, are pointed out. The cost of down-processing and ecological problems are significantly reduced by applying lipases. It was also emphasized that lipase-catalysed transesterification should be greatly improved in order to make it commercially applicable. The further optimization of lipase-catalyzed transesterification should include studies on the development of new reactor systems with immobilized biocatalysts and the addition of alcohol in several portions, and the use of extra cellular lipases tolerant to organic solvents, intracellular lipases (i.e. whole microbial cells and genetically-modified microorganisms ("intelligent" yeasts.

  8. Production and analysis of bio-diesel from non-edible oils. A review

    Energy Technology Data Exchange (ETDEWEB)

    Murugesan, A.; Chinnusamy, T.R.; Krishnan, M. [Department of Mechanical Engineering, K.S. Rangasamy College of Technology, Tiruchengode 637215, Tamil Nadu (India); Umarani, C. [Department of Chemistry, Government Arts College, Salem (India); Subramanian, R. [Department of Automobile Engineering, Institute of Road and Transport Technology, Erode, Tamil Nadu (India); Neduzchezhain, N. [Sabbatical, Department of Mechanical Engineering, BITS, Pilani, Dubai (United Arab Emirates)

    2009-05-15

    Bio-diesel has become more attractive recently because of its environmental benefits and it is derived from renewable resources, bio degradable and non-toxic in nature. Several bio-diesel production methods have been developed, among which transesterification using alkali catalyst gives high level of conversion of triglycerides to their corresponding methyl ester in short reaction time. The process of transesterification is affected by the reaction condition, molar ratio of alcohol to oil, type of alcohol, type and amount of catalysts, reaction time and temperature, purity of reactants free fatty acids and water content of oils or fats. In this work, an attempt has been made on review of bio-diesel production, methods of analyzing, bio-diesel standard, resources available, process developed performance in internal combustion engines, teardown analysis of bio-diesel B20 operated vehicle, recommendation for development of bio-fuels, environmental considerations, economic aspects and advantages. The technical tools and process for monitoring the transesterification reaction like TLC, GC, HPLC, GPC, {sup 1}H NMR and NIR have also been summarized in this paper. (author)

  9. Evaluation of Biodiesel Production, Engine Performance, and Emissions

    Science.gov (United States)

    Gürü, Metin; Keskïn, Ali

    2016-06-01

    Nowadays, to decrease environmental pollution and dependence on fossil-based fuels, research on alternative renewable energy sources has been increasing. One such renewable energy source is biodiesel, which is used as an alternative fuel for diesel engines. Biodiesel is renewable, nontoxic, biodegradable, and environmentally friendly. Biodiesel is domestically produced from vegetable␣oil (edible or nonedible), animal fat, and used cooking oils. In the biodiesel production process, oil or fat undergoes transesterification reaction through use of simple alcohols such as methanol, ethanol, propanol, butanol, etc. Use of methanol is most feasible because of its low cost, and physical and chemical advantages. Acid catalysis, alkali catalysis, and enzyme catalysis are usually used to improve the reaction rate and yield. Glycerol is a byproduct of the reaction and can be used as an industrial raw material. In this study, biodiesel production methods (direct use, pyrolysis, microemulsion, transesterification, supercritical processes, ultrasound- assisted, and microwave-assisted) and types of catalyst (homogeneous, heterogeneous, and enzyme) have been evaluated and compared. In addition, the effects of biodiesel and its blends on diesel engine performance and exhaust emissions are described and reviewed.

  10. Biodiesel Production from Microalgae by Extraction – Transesterification Method

    Directory of Open Access Journals (Sweden)

    Nguyen Thi Phuong Thao

    2013-11-01

    Full Text Available The environmental impact of using petroleum fuels has led to a quest to find a suitable alternative fuel source. In this study, microalgae were explored as a highly potential feedstock to produce biodiesel fuel. Firstly, algal oil is extracted from algal biomass by using organic solvents (n–hexan.  Lipid is contained in microalgae up to 60% of their weight. Then, Biodiesel is created through a chemical reaction known as transesterification between algal oil and alcohol (methanol with strong acid (such as H2SO4 as the catalyst. The extraction – transesterification method resulted in a high biodiesel yield (10 % of algal biomass and high FAMEs content (5.2 % of algal biomass. Biodiesel production from microalgae was studied through experimental investigation of transesterification conditions such as reaction time, methanol to oil ration and catalyst dosage which are deemed to have main impact on reaction conversion efficiency. All the parameters which were characterized for purified biodiesel such as free glycerin, total glycerin, flash point, sulfur content were analyzed according to ASTM standardDoi: http://dx.doi.org/10.12777/wastech.1.1.6-9Citation:  Thao, N.T.P., Tin, N.T., and Thanh, B.X. 2013. Biodiesel Production from Microalgae by Extraction – Transesterification Method. Waste Technology 1(1:6-9. Doi: http://dx.doi.org/10.12777/wastech.1.1.6-9

  11. Evaluation of Biodiesel Production, Engine Performance, and Emissions

    Science.gov (United States)

    Gürü, Metin; Keskïn, Ali

    2016-08-01

    Nowadays, to decrease environmental pollution and dependence on fossil-based fuels, research on alternative renewable energy sources has been increasing. One such renewable energy source is biodiesel, which is used as an alternative fuel for diesel engines. Biodiesel is renewable, nontoxic, biodegradable, and environmentally friendly. Biodiesel is domestically produced from vegetable oil (edible or nonedible), animal fat, and used cooking oils. In the biodiesel production process, oil or fat undergoes transesterification reaction through use of simple alcohols such as methanol, ethanol, propanol, butanol, etc. Use of methanol is most feasible because of its low cost, and physical and chemical advantages. Acid catalysis, alkali catalysis, and enzyme catalysis are usually used to improve the reaction rate and yield. Glycerol is a byproduct of the reaction and can be used as an industrial raw material. In this study, biodiesel production methods (direct use, pyrolysis, microemulsion, transesterification, supercritical processes, ultrasound- assisted, and microwave-assisted) and types of catalyst (homogeneous, heterogeneous, and enzyme) have been evaluated and compared. In addition, the effects of biodiesel and its blends on diesel engine performance and exhaust emissions are described and reviewed.

  12. A process model to estimate the cost of industrial scale biodiesel production from waste cooking oil by supercritical transesterification

    Energy Technology Data Exchange (ETDEWEB)

    Van Kasteren, J.M.N. [Telos, Brabant' s Institute for Sustainable Development, P.O. Box 90153, 5000 LE Tilburg (Netherlands); Nisworo, A.P. [Eindhoven University of Technology, Department of Chemical Engineering, Process and Product Design, Den Dolech 2, 5612 AX Eindhoven (Netherlands)

    2007-06-15

    This paper describes the conceptual design of a production process in which waste cooking oil is converted via supercritical transesterification with methanol to methyl esters (biodiesel). Since waste cooking oil contains water and free fatty acids, supercritical transesterification offers great advantage to eliminate the pre-treatment capital and operating cost. A supercritical transesterification process for biodiesel continuous production from waste cooking oil has been studied for three plant capacities (125,000; 80,000 and 8000 tonnes biodiesel/year). It can be concluded that biodiesel by supercritical transesterification can be scaled up resulting high purity of methyl esters (99.8%) and almost pure glycerol (96.4%) attained as by-product. The economic assessment of the biodiesel plant shows that biodiesel can be sold at US$ 0.17/l (125,000 tonnes/year), US$ 0.24/l (80,000 tonnes/year) and US$ 0.52/l for the smallest capacity (8000 tonnes/year). The sensitive key factors for the economic feasibility of the plant are: raw material price, plant capacity, glycerol price and capital cost. Overall conclusion is that the process can compete with the existing alkali and acid catalyzed processes. Especially for the conversion of waste cooking oil to biodiesel, the supercritical process is an interesting technical and economical alternative. (author)

  13. Influence of economical variables on a supercritical biodiesel production process

    International Nuclear Information System (INIS)

    Highlights: • Biodiesel production from supercritical process. • Economical analysis. • Influence of market variables. - Abstract: Biodiesel has becoming more and more relevant in today’s society and economy due to its environmental advantages such as biodegradability, lower CO and CO2 emissions as well as less particulate pollutants. In this work the study of market and economic variables is presented and their effects compared when biodiesel is being produced using a supercritical technology. The production process is based on a supercritical technology with no catalyst and no co-solvent. Price for the raw materials, such as price for the alcohol as well as the oil has been studied. Also, selling price for biodiesel as well as glycerin has been analyzed and compared with prices from other biodiesel production technologies. Economic decisions such as percentage of failure in the production process, investment in research and development, and advertisement have been evaluated; also it has been considered the influence of the tax incentives on the global economy of the production process. Small variations on some of the major market variables would produce significant effects over the global economy of the plant, making it non profitable in some cases

  14. Sustainable Energy Production from Jatropha Bio-Diesel

    Science.gov (United States)

    Yadav, Amit Kumar; Krishna, Vijai

    2012-10-01

    The demand for petroleum has risen rapidly due to increasing industrialization and modernization of the world. This economic development has led to a huge demand for energy, where the major part of that energy is derived from fossil sources such as petroleum, coal and natural gas. Continued use of petroleum sourced fuels is now widely recognized as unsustainable because of depleting supplies. There is a growing interest in using Jatropha curcas L. oil as the feedstock for biodiesel production because it is non-edible and thus does not compromise the edible oils, which are mainly used for food consumption. Further, J. curcas L. seed has a high content of free fatty acids that is converted in to biodiesel by trans esterification with alcohol in the presence of a catalyst. The biodiesel produced has similar properties to that of petroleum-based diesel. Biodiesel fuel has better properties than petro diesel fuel; it is renewable, biodegradable, non-toxic, and essentially free of sulfur and aromatics. Biodiesel seems to be a realistic fuel for future. Biodiesel has the potential to economically, socially, and environmentally benefit communities as well as countries, and to contribute toward their sustainable development.

  15. Response Surface Methodology: An Emphatic Tool for Optimized Biodiesel Production Using Rice Bran and Sunflower Oils

    Directory of Open Access Journals (Sweden)

    Farooq Ahmad

    2012-09-01

    Full Text Available The current study describes the emphatic use of response surface methodology for the optimized biodiesel production using chemical and enzymatic transesterification of rice bran and sunflower oils. Optimal biodiesel yields were determined to be 65.3 ± 2.0%, 73.4 ± 3.5%, 96.5 ± 1.6%, 89.3 ± 2.0% and 41.7 ± 3.9% for rice bran oil and 65.6 ± 1.2%, 82.1 ± 1.7%, 92.5 ± 2.8%, 72.6 ± 1.6% and 50.4 ± 2.5% for sunflower oil via the transesterification catalyzed by NaOH, KOH and NaOCH3,NOVOZYME-435 and A.n. Lipase, respectively. Based upon analysis of variance (ANOVA and Response Surface plots significant impact of reaction parameters under study was ascertained. FTIR spectroscopic and HPLC methods were employed for monitoring the transesterification reaction progress while GC-MS analysis was performed to evaluate the compositional analysis of biodiesel. The fuel properties of both the rice bran and sunflower oil based biodiesel were shown to be technically compatible with the ASTM D6751 and EN 14214 standards. The monitoring of exhaust emission of synthesized biodiesels and their blends revealed a marked reduction in carbon monoxide (CO and particulate matter (PM levels, whereas an irregular trend was observed for NOx emissions.

  16. Fuel Pellets Production from Biodiesel Waste

    Directory of Open Access Journals (Sweden)

    Kawalin Chaiyaomporn

    2010-01-01

    Full Text Available This research palm fiber and palm shell were used as raw materials to produce pelletised fuel, and waste glycerol were used as adhesive to reduce biodiesel production waste. The aim of this research is to find optimum ratio of raw material (ratio of palm fiber and palm shell, raw material size distribution, adhesive temperature, and ratio of ingredients (ratio of raw material, waste glycerol, and water. The optimum ratio of pelletized fuel made only by palm fiber was 50:10:40; palm fiber, water, and waste glycerol respectively. In the best practice condition; particle size was smaller than 2 mm, adhesive glycerol was heated. From the explained optimum ratio and ingredient, pelletizing ratio was 62.6%, specific density was 982.2 kg/m3, heating value was 22.5 MJ/kg, moisture content was 5.9194%, volatile matter was 88.2573%, fix carbon content was 1.5894%, and ash content was 4.2339% which was higher than the standard. Mixing palm shell into palm fiber raw material reduced ash content of the pellets. The optimum raw material ratio, which minimizes ash content, was 80 to 20 palm fiber and palm shell respectively. Adding palm shell reduced ash content to be 2.5247% which was higher than pelletized fuel standard but followed cubed fuel standard. At this raw material ratio, pelletizing ratio was 70.5%, specific density was 774.8 kg/m3, heating value was 19.71 MJ/kg, moisture content was 9.8137%, volatile matter was 86.2259%, fix carbon content was 1.4356%, and compressive force was 4.83 N. Pelletized fuel cost at optimum condition was 1.14 baht/kg.

  17. Chitosan and Its Derivatives Applied in Harvesting Microalgae for Biodiesel Production: An Outlook

    OpenAIRE

    Guanyi Chen; Liu Zhao; Yun Qi; Yuan-Lu Cui

    2014-01-01

    Although oil-accumulating microalgae are a promising feedstock for biodiesel production, large-scale biodiesel production is not yet economically feasible. As harvesting accounts for an important part of total production cost, mass production of microalgae biodiesel requires an efficient low-energy harvesting strategy so as to make biodiesel production economically attractive. Chitosan has emerged as a favorable flocculating agent in harvesting of microalgae. The aim of this paper is to revie...

  18. Solid Catalysts and theirs Application in Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Ramli Mat

    2012-12-01

    Full Text Available The reduction of oil resources and increasing petroleum price has led to the search for alternative fuel from renewable resources such as biodiesel. Currently biodiesel is produced from vegetable oil using liquid catalysts. Replacement of liquid catalysts with solid catalysts would greatly solve the problems associated with expensive separation methods and corrosion problems, yielding to a cleaner product and greatly decreasing the cost of biodiesel production. In this paper, the development of solid catalysts and its catalytic activity are reviewed. Solid catalysts are able to perform trans-esterification and esterification reactions simultaneously and able to convert low quality oils with high amount of Free Fatty Acids. The parameters that effect the production of biodiesel are discussed in this paper. Copyright © 2012 by BCREC UNDIP. All rights reservedReceived: 6th April 2012, Revised: 24th October 2012, Accepted: 24th October 2012[How to Cite: R. Mat, R.A. Samsudin, M. Mohamed, A. Johari, (2012. Solid Catalysts and Their Application in Biodiesel Production. Bulletin of Chemical Reaction Engineering & Catalysis, 7(2: 142-149. doi:10.9767/bcrec.7.2.3047.142-149] [How to Link / DOI: http://dx.doi.org/10.9767/bcrec.7.2.3047.142-149 ] | View in 

  19. Model Feed for Hydrotreating of Fat for Biodiesel Production

    DEFF Research Database (Denmark)

    Biodiesel production by the transesterification of oils and fats with an alcohol to fatty acid alkyl esters is rapidly increasing worldwide. Plant oils are usually suited for transesterification, but feedstocks from waste products like trap greases and abattoir wastes are difficult to react due...... resulted in lower conversions and a much higher degree of hydrogenation than with the Pt catalyst. This protocol represents a facile method of studying hydrotreating of waste fats and oils for biodiesel production, which may be a viable alternative to current dominating transesterification technology. 1...

  20. Optimization of Substrate Feeding for Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Huusom, Jakob Kjøbsted; Nordblad, Mathias;

    2013-01-01

    to be effective in mitigating the effects of substrate inhibition. Using enzymatic biodiesel production as a case study, the volumetric productivity of the reactor is increased while minimizing inactivation of the enzyme due to the alcohol. This is done by using a simple optimization routine where the substrate...... (both the vegetable oil and alcohol) feed rate/concentration is manipulated simultaneously. The results of the simulation were tested in the laboratory and are sufficiently positive to suggest the implementation of a feeding strategy for large scale enzymatic biodiesel production...

  1. Optimization of Substrate Feeding for Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Huusom, Jakob Kjøbsted; Nordblad, Mathias;

    to be effective in mitigating the effects of substrate inhibition. Using enzymatic biodiesel production as a case study, the volumetric productivity of the reactor is increased while minimizing inactivation of the enzyme due to the alcohol. This is done by using a simple optimization routine where the substrate...... (both the vegetable oil and alcohol) feed rate/concentration is manipulated simultaneously. The results of the simulation were tested in the laboratory and are sufficiently positive to suggest the implementation of a feeding strategy for large scale enzymatic biodiesel production....

  2. Biodiesel production using oil from fish canning industry wastes

    International Nuclear Information System (INIS)

    Highlights: • A process was established to produce biodiesel from fish canning industry wastes. • Biodiesel production was enabled by an acid esterification pre-treatment. • Optimization studies showed that the best catalyst concentration was 1 wt.% H2SO4. • There was no advantage when a two-step alkali transesterification was employed. • Waste oil from olive oil bagasse could be used to improve fuel quality. - Abstract: The present study evaluated biodiesel production using oil extracted from fish canning industry wastes, focusing on pre-treatment and reaction conditions. Experimental planning was conducted to evaluate the influence of acid catalyst concentration (1–3 wt.% H2SO4) in the esterification pre-treatment and the amount of methanolic solution (60–90 vol.%) used at the beginning of the further two-step alkali transesterification reaction. The use of a raw-material mixture, including waste oil obtained from olive oil bagasse, was also studied. The results from experimental planning showed that catalyst concentration mostly influenced product yield and quality, the best conditions being 1 wt.% catalyst and 60 vol.% of methanolic solution, to obtain a product yield of 73.9 wt.% and a product purity of 75.5 wt.%. Results from a one-step reaction under the selected conditions showed no advantage of performing a two-step alkali process. Although under the best conditions several of the biodiesel quality parameters were in agreement with standard specifications, a great variation was found in the biodiesel acid value, and oxidation stability and methyl ester content did not comply with biodiesel quality standards. Aiming to improve fuel quality, a mixture containing 80% waste olive oil and 20% of waste fish oil was evaluated. Using such mixture, biodiesel purity increased around 15%, being close to the standard requirements (96.5 wt.%), and the oxidation stability was in agreement with the biodiesel quality standard values (⩾6 h), which are

  3. Production of Biodiesel through Transesterification of Avocado (Persea gratissima Seed Oil Using Base Catalyst

    Directory of Open Access Journals (Sweden)

    H. M. Rachimoellah

    2009-01-01

    Full Text Available Biodiesel is produced through a chemical process called transesterification, which refers to a catalysed chemical reaction involving vegetable oil and alcohol to yield fatty acid alkyl esters (biodiesel and glycerol as a by product. Biodiesel is petroleum substitution in which its quantity continually decreases due to increasing of demand. Plenty of plants could be used as raw material for biodiesel, for example is avocado (Persea gratissima seed. This is a waste that being thrown out after the flesh is taken. Therefore, avocado has a higher economic value to be used for consumption. Avocado is not only as an edible commodity but also as feedstock for production of biodiesel. The purposes of this research are producing biodiesel from avocado seed oil (Persea gratissima so it can be used for alternative fuel, studying the effect of molar ratio avocado seed oil to methanol and reaction temperature to yield the highest methyl ester content, and also studying the effect of washing method and comparing between the conventional method (using water and dry washing method to reach the highest methyl ester content. Variables that are used in this research are molar ratio of methanol to avocado seed oil, reaction temperature, and washing method. Transesterification process runs for 60 minutes, with NaOH as base catalyst concentration is 1% by weight. Avocado seed oil contains free fatty acid less than 2%, so that transesterification process can be carried out with no addition step to convert free fatty acid content become esters. Crude biodiesel which is yielded from transesterification process still contains of impurities, such as traces of glycerine, unreacted methanol, rest of base catalyst, and soap stock. So it needs to be washed out. There are two washing methods, which are water washing and dry washing. The use of dry washing method is expected to be technically feasible with less complexity than the water washing method, thereby making it a

  4. Use of ionic liquids in biodiesel production: a review

    Directory of Open Access Journals (Sweden)

    L. Andreani

    2012-03-01

    Full Text Available This paper discusses the feasibility of the use of ionic liquids as catalysts in the biodiesel production field, describing some studies already published in the literature on this theme. Ionic liquids are regarded as a new generation of catalysts in the chemical industry, with several uses in different commercial segments. However only a few publications involving this topic can be found in the literature addressing the manufacture of biodiesel from vegetable oils or animal fats. Through the analysis of the data generated in the studies reviewed, it is possible to affirm that ionic liquids present great potential as catalysts for biodiesel production, but there are some challenges to be faced, such as the production of ionic liquids with low cost, easy recovery and with the possibility of reutilization of the catalyst for several cycles.

  5. Biodiesel production from Jatropha curcas: a critical review.

    Science.gov (United States)

    Abdulla, Rahmath; Chan, Eng Seng; Ravindra, Pogaku

    2011-03-01

    The fuel crisis and environmental concerns, mainly due to global warming, have led researchers to consider the importance of biofuels such as biodiesel. Vegetable oils, which are too viscous to be used directly in engines, are converted into their corresponding methyl or ethyl esters by a process called transesterification. With the recent debates on "food versus fuel," non-edible oils, such as Jatropha curcas, are emerging as one of the main contenders for biodiesel production. Much research is still needed to explore and realize the full potential of a green fuel from J. curcas. Upcoming projects and plantations of Jatropha in countries such as India, Malaysia, and Indonesia suggest a promising future for this plant as a potential biodiesel feedstock. Many of the drawbacks associated with chemical catalysts can be overcome by using lipases for enzymatic transesterification. The high cost of lipases can be overcome, to a certain extent, by immobilization techniques. This article reviews the importance of the J. curcas plant and describes existing research conducted on Jatropha biodiesel production. The article highlights areas where further research is required and relevance of designing an immobilized lipase for biodiesel production is discussed.

  6. Ultrasound Assisted Esterification of Rubber Seed Oil for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Berkah Fajar Tamtomo Kiono

    2012-02-01

    Full Text Available roduction of biodiesel is currently shifting from the first to the second generation in which the raw materials are mostly from non-edible type oils and fats. Biodiesel production is commonly conducted under batch operation using mechanical agitation to accelerate mass transfers. The main drawback of oil esterification is the high content of free fatty acids (FFA which may reduce the yield of biodiesel and prolong the production time (2-5 hours. Ultrasonification has been used in many applications such as component extraction due to its ability to produce cavitation under certain frequency. This research is aimed to facilitate ultrasound system for improving biodiesel production process particularly rubber seed oil. An ultrasound unit was used under constant temperature (40oC and frequency of 40 Hz. The result showed that ultrasound can reduces the processing time and increases the biodiesel yield significantly. A model to describe correlation of yield and its independent variables is yield (Y = 43,4894 – 0,6926 X1 + 1,1807 X2 – 7,1042 X3 + 2,6451 X1X2 – 1,6557 X1X3 + 5,7586 X2X3 - 10,5145 X1X2X3, where X1 is mesh sizes, X2 ratio oil: methanol and X3 type of catalyst.

  7. A review on biodiesel production using catalyzed transesterification

    Energy Technology Data Exchange (ETDEWEB)

    Leung, Dennis Y.C.; Wu, Xuan; Leung, M.K.H. [Department of Mechanical Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong (China)

    2010-04-15

    Biodiesel is a low-emissions diesel substitute fuel made from renewable resources and waste lipid. The most common way to produce biodiesel is through transesterification, especially alkali-catalyzed transesterification. When the raw materials (oils or fats) have a high percentage of free fatty acids or water, the alkali catalyst will react with the free fatty acids to form soaps. The water can hydrolyze the triglycerides into diglycerides and form more free fatty acids. Both of the above reactions are undesirable and reduce the yield of the biodiesel product. In this situation, the acidic materials should be pre-treated to inhibit the saponification reaction. This paper reviews the different approaches of reducing free fatty acids in the raw oil and refinement of crude biodiesel that are adopted in the industry. The main factors affecting the yield of biodiesel, i.e. alcohol quantity, reaction time, reaction temperature and catalyst concentration, are discussed. This paper also described other new processes of biodiesel production. For instance, the Biox co-solvent process converts triglycerides to esters through the selection of inert co-solvents that generates a one-phase oil-rich system. The non-catalytic supercritical methanol process is advantageous in terms of shorter reaction time and lesser purification steps but requires high temperature and pressure. For the in situ biodiesel process, the oilseeds are treated directly with methanol in which the catalyst has been preciously dissolved at ambient temperatures and pressure to perform the transesterification of oils in the oilseeds. This process, however, cannot handle waste cooking oils and animal fats. (author)

  8. Fed-Batch Feeding Strategies for Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Nordblad, Mathias; Woodley, John;

    2014-01-01

    of the differences in the interfacial and bulk concentrations of the enzyme. The model is then used to evaluate various feeding strategies to improve the enzymatic biodiesel production. The feeding strategies investigated, gave insight into how the methanol should be fed to potentially mitigate enzyme deactivation...... while improving the biodiesel yield. The best experimental results gave a yield of 703 .76 g FAME L-1 and a reactor productivity of 28.12 g FAME L-1 h-1. In comparison, to reach the same yield, the optimised two step feeding strategy took 6.25 hours less, which equates to an increase the reactor...

  9. In-situ pyrogenic production of biodiesel from swine fat.

    Science.gov (United States)

    Lee, Jechan; Tsang, Yiu Fai; Jung, Jong-Min; Oh, Jeong-Ik; Kim, Hyung-Wook; Kwon, Eilhann E

    2016-11-01

    In-situ production of fatty acid methyl esters from swine fat via thermally induced pseudo-catalytic transesterification on silica was investigated in this study. Instead of methanol, dimethyl carbonate (DMC) was used as acyl acceptor to achieve environmental benefits and economic viability. Thermo-gravimetric analysis of swine fat reveals that swine fat contains 19.57wt.% of water and impurities. Moreover, the fatty acid profiles obtained under various conditions (extracted swine oil+methanol+NaOH, extracted swine oil+DMC+pseudo-catalytic, and swine fat+DMC+pseudo-catalytic) were compared. These profiles were identical, showing that the introduced in-situ transesterification is technically feasible. This also suggests that in-situ pseudo-catalytic transesterification has a high tolerance against impurities. This study also shows that FAME yield via in-situ pseudo-catalytic transesterification of swine fat reached up to 97.2% at 380°C. Therefore, in-situ pseudo-catalytic transesterification can be applicable to biodiesel production of other oil-bearing biomass feedstocks. PMID:27611027

  10. Biodiesel production from seed oil of Cleome viscosa L.

    Science.gov (United States)

    Kumari, Rashmi; Jain, Vinod Kumar; Kumar, Sushil

    2012-07-01

    Edible oil seed crops, such as rapeseed, sunflower, soyabean and safflower and non-edible seed oil plantation crops Jatropha and Pongamia have proved to be internationally viable commercial sources of vegetable oils for biodiesel production. Considering the paucity of edible oils and unsustainability of arable land under perennial plantation of Jatropha and Pongamia in countries such as India, the prospects of seed oil producing Cleome viscosa, an annual wild short duration plant species of the Indogangetic plains, were evaluated for it to serve as a resource for biodiesel. The seeds of C. viscosa resourced from its natural populations growing in Rajasthan, Haryana and Delhi areas of Aravali range were solvent extracted to obtain the seed oil. The oil was observed to be similar in fatty acid composition to the non-edible oils of rubber, Jatropha and Pongamia plantation crops and soybean, sunflower, safflower, linseed and rapeseed edible oil plants in richness of unsaturated fatty acids. The Cleome oil shared the properties of viscosity, density, saponification and calorific values with the Jatropha and Pongamia oils, except that it was comparatively acidic. The C. viscosa biodiesel had the properties of standard biodiesel specified by ASTM and Indian Standard Bureau, except that it had low oxidation stability. It proved to be similar to Jatropha biodiesel except in cloud point, pour point, cold filter plugging point and oxidation stability. In view of the annual habit of species and biodiesel quality, it can be concluded that C. viscosa has prospects to be developed into a short-duration biodiesel crop. PMID:22822531

  11. Biodiesel production from seed oil of Cleome viscosa L.

    Science.gov (United States)

    Kumari, Rashmi; Jain, Vinod Kumar; Kumar, Sushil

    2012-07-01

    Edible oil seed crops, such as rapeseed, sunflower, soyabean and safflower and non-edible seed oil plantation crops Jatropha and Pongamia have proved to be internationally viable commercial sources of vegetable oils for biodiesel production. Considering the paucity of edible oils and unsustainability of arable land under perennial plantation of Jatropha and Pongamia in countries such as India, the prospects of seed oil producing Cleome viscosa, an annual wild short duration plant species of the Indogangetic plains, were evaluated for it to serve as a resource for biodiesel. The seeds of C. viscosa resourced from its natural populations growing in Rajasthan, Haryana and Delhi areas of Aravali range were solvent extracted to obtain the seed oil. The oil was observed to be similar in fatty acid composition to the non-edible oils of rubber, Jatropha and Pongamia plantation crops and soybean, sunflower, safflower, linseed and rapeseed edible oil plants in richness of unsaturated fatty acids. The Cleome oil shared the properties of viscosity, density, saponification and calorific values with the Jatropha and Pongamia oils, except that it was comparatively acidic. The C. viscosa biodiesel had the properties of standard biodiesel specified by ASTM and Indian Standard Bureau, except that it had low oxidation stability. It proved to be similar to Jatropha biodiesel except in cloud point, pour point, cold filter plugging point and oxidation stability. In view of the annual habit of species and biodiesel quality, it can be concluded that C. viscosa has prospects to be developed into a short-duration biodiesel crop.

  12. A technical evaluation of biodiesel from vegetable oils vs. algae. Will algae-derived biodiesel perform?

    Science.gov (United States)

    Biodiesel, one of the most prominent renewable alternative fuels, can be derived from a variety of sources including vegetable oils, animal fats and used cooking oils as well as alternative sources such as algae. While issues such as land-use change, food vs. fuel, feedstock availability, and produc...

  13. Oil industry waste: a potential feedstock for biodiesel production.

    Science.gov (United States)

    Abbas, Javeria; Hussain, Sabir; Iqbal, Muhammad Javid; Nadeem, Habibullah; Qasim, Muhammad; Hina, Saadia; Hafeez, Farhan

    2016-08-01

    The worldwide rising energy demands and the concerns about the sustainability of fossil fuels have led to the search for some low-cost renewable fuels. In this scenario, the production of biodiesel from various vegetable and animal sources has attracted worldwide attention. The present study was conducted to evaluate the production of biodiesel from the oil industry waste following base-catalysed transesterification. The transesterification reaction gave a yield of 83.7% by 6:1 methanol/oil molar ratio, at 60°C over 80 min of reaction time in the presence of NaOH. The gas chromatographic analysis of the product showed the presence of 16 fatty acid methyl esters with linoleic and oleic acid as principal components representing about 31% and 20.7% of the total methyl esters, respectively. The fourier transform infrared spectroscopy spectrum of oil industry waste and transesterified product further confirmed the formation of methyl esters. Furthermore, the fuel properties of oil industry waste methyl esters, such as kinematic viscosity, cetane number, cloud point, pour point, flash point, acid value, sulphur content, cold filter plugging point, copper strip corrosion, density, oxidative stability, higher heating values, ash content, water content, methanol content and total glycerol content, were determined and discussed in the light of ASTM D6751 and EN 14214 biodiesel standards. Overall, this study presents the production of biodiesel from the oil industry waste as an approach of recycling this waste into value-added products. PMID:26776601

  14. Oil industry waste: a potential feedstock for biodiesel production.

    Science.gov (United States)

    Abbas, Javeria; Hussain, Sabir; Iqbal, Muhammad Javid; Nadeem, Habibullah; Qasim, Muhammad; Hina, Saadia; Hafeez, Farhan

    2016-08-01

    The worldwide rising energy demands and the concerns about the sustainability of fossil fuels have led to the search for some low-cost renewable fuels. In this scenario, the production of biodiesel from various vegetable and animal sources has attracted worldwide attention. The present study was conducted to evaluate the production of biodiesel from the oil industry waste following base-catalysed transesterification. The transesterification reaction gave a yield of 83.7% by 6:1 methanol/oil molar ratio, at 60°C over 80 min of reaction time in the presence of NaOH. The gas chromatographic analysis of the product showed the presence of 16 fatty acid methyl esters with linoleic and oleic acid as principal components representing about 31% and 20.7% of the total methyl esters, respectively. The fourier transform infrared spectroscopy spectrum of oil industry waste and transesterified product further confirmed the formation of methyl esters. Furthermore, the fuel properties of oil industry waste methyl esters, such as kinematic viscosity, cetane number, cloud point, pour point, flash point, acid value, sulphur content, cold filter plugging point, copper strip corrosion, density, oxidative stability, higher heating values, ash content, water content, methanol content and total glycerol content, were determined and discussed in the light of ASTM D6751 and EN 14214 biodiesel standards. Overall, this study presents the production of biodiesel from the oil industry waste as an approach of recycling this waste into value-added products.

  15. Microbial Conversion of Waste Glycerol from Biodiesel Production into Value-Added Products

    OpenAIRE

    Hong Liu; Cheng Li; Keaton L. Lesnik

    2013-01-01

    Biodiesel has gained a significant amount of attention over the past decade as an environmentally friendly fuel that is capable of being utilized by a conventional diesel engine. However, the biodiesel production process generates glycerol-containing waste streams which have become a disposal issue for biodiesel plants and generated a surplus of glycerol. A value-added opportunity is needed in order to compensate for disposal-associated costs. Microbial conversions from glycerol to valuable c...

  16. Thermally assisted sensor for conformity assessment of biodiesel production

    International Nuclear Information System (INIS)

    Although biodiesel can be intentionally tampered with, impairing its quality, ineffective production processes may also result in a nonconforming final fuel. For an incomplete transesterification reaction, traces of alcohol (ethanol or methanol) or remaining raw material (vegetable oil or animal fats) may be harmful to consumers, the environment or to engines. Traditional methods for biodiesel assessment are complex, time consuming and expensive, leading to the need for the development of new and more versatile processes for quality control. This work describes a refractometric fibre optic based sensor that is thermally assisted, developed to quantify the remaining methanol or vegetable oil in biodiesel blends. The sensing relies on a long period grating to configure an in-fibre interferometer. A complete analytical routine is demonstrated for the sensor allowing the evaluation of the biodiesel blends without segregation of the components. The results show the sensor can determine the presence of oil or methanol in biodiesel with a concentration ranging from 0% to 10% v/v. The sensor presented a resolution and standard combined uncertainty of 0.013% v/v and 0.62% v/v for biodiesel–oil samples, and 0.007% v/v and 0.22% v/v for biodiesel–methanol samples, respectively. (paper)

  17. Thermoeconomic Analysis of Biodiesel Production from Used Cooking Oils

    Directory of Open Access Journals (Sweden)

    Emilio Font de Mora

    2015-05-01

    Full Text Available Biodiesel from used cooking oil (UCO is one of the most sustainable solutions to replace conventional fossil fuels in the transport sector. It can achieve greenhouse gas savings up to 88% and at the same time reducing the disposal of a polluting waste. In addition, it does not provoke potential negative impacts that conventional biofuels may eventually cause linked to the use of arable land. For this reason, most policy frameworks favor its consumption. This is the case of the EU policy that double-counters the use of residue and waste use to achieve the renewable energy target in the transport sector. According to different sources, biodiesel produced from UCO could replace around 1.5%–1.8% of the EU-27 diesel consumption. This paper presents an in-depth thermoeconomic analysis of the UCO biodiesel life cycle to understand its cost formation process. It calculates the ExROI value (exergy return on investment and renewability factor, and it demonstrates that thermoeconomics is a useful tool to assess life cycles of renewable energy systems. It also shows that UCO life cycle biodiesel production is more sustainable than biodiesel produced from vegetable oils.

  18. Noncatalytic biodiesel fuel production from croton megalocarpus oil

    Energy Technology Data Exchange (ETDEWEB)

    Kafuku, G.; Mbarawa, M. [Department of Mechanical Engineering, Tshwane University of Technology, Pretoria (South Africa); Tan, K.T.; Lee, K.T. [School of Chemical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal, Pulau Pinang (Malaysia)

    2011-11-15

    Biodiesel is currently considered as the most promising substitute for diesel fuel because of its similar properties to diesel. This study presents the use of the supercritical methanol method in the production of biodiesel from Croton megalocarpus oil. The reaction parameters such as methanol-to-oil ratio, reaction temperature and reaction time were varied to obtain the optimal reaction conditions by design of experiment, specifically, response surface methodology based on three-variable central composite design with {alpha}=2. It has been shown that it is possible to achieve methyl ester yields as high as 74.91 % with reaction conditions such as 50:1 methanol-to-oil molar ratio, 330 C reaction temperature and a reaction period of 20 min. However, Croton-based biodiesel did not sustain higher temperatures due to decomposition of polyunsaturated methyl linoleate, which is dominant in biodiesel. Lower yields were observed when higher temperatures were used during the optimization process. The supercritical methanol method showed competitive biodiesel yields when compared with catalytic methods. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  19. Integrated biodiesel production: a comparison of different homogeneous catalysts systems

    Energy Technology Data Exchange (ETDEWEB)

    Vicente, Gemma; Martinez, Mercedes; Aracil, Jose [Complutense Univ., Dept. of Chemical Engineering, Madrid (Spain)

    2004-05-01

    The most common catalysts for biodiesel production are homogeneous basic catalysts. In the present paper, a comparison is made of different basic catalysts (sodium methoxide, potassium methoxide, sodium hydroxide and potassium hydroxide) for methanolysis of sunflower oil. All the reactions were carried out under the same experimental conditions in a batch stirred reactor and the subsequent separation and purification stages in a decanter. The analytical methods included gas chromatography and the determination of fat and oil conventional parameters. The biodiesel purity was near 100 wt. % for all catalysts. However, near 100 wt. % biodiesel yields were only obtained with the methoxide catalysts. According to the material balance of the process, yield losses were due to triglyceride saponification and methyl ester dissolution in glycerol. Obtained biodiesel met the measured specifications, except for the iodine value, according to the German and EU draft standards. Although all the transesterification reactions were quite rapid and the biodiesel layers achieved nearly 100% methyl ester concentrations, the reactions using sodium hydroxide turned out the fastest. (Author)

  20. Process optimization of biodiesel production from wild rapeseed (Brassica campestris

    Directory of Open Access Journals (Sweden)

    Héctor Ramírez

    2012-03-01

    Full Text Available The objectives of this study were, to optimize the performance of biodiesel from rapeseed wild oil depending on the molar ratio methanol / oil, the concentration of NaOH and KOH homogeneous catalysts, temperature and time of transesterification through the response surface methodology, and determining the physicochemical characteristics of biodiesel obtained under optimized conditions. A Plackett and Burman (PB12 design was applied for the screening stage and a rotatable central composite design (DCCR for the final optimization. The conditions that maximize the yield of biodiesel (77.8% were obtained at concentrations of 0 to 0.2% NaOH and 0.4 to 0.6% KOH, with time from 77 to 81 minutes, keeping constant the molar ratio of methanol/oil in 6/1 and a temperature of 60 °C. The physicochemical properties of biodiesel obtained under optimized conditions meet the technical specifications given by ASTM D6751 - 07 and EN14214

  1. Enhancement of biodiesel production from different species of algae

    OpenAIRE

    El-Moneim M. R. Afify, Abd; Shalaby, Emad A; Shanab, Sanaa M. M.

    2010-01-01

    Eight algal species (4 Rhodo, 1 chloro and 1 phaeophycean macroalgae, 1 cyanobacterium and 1 green microalga) were used for the production of biodiesel using two extraction solvent systems (Hexane/ether (1:1, v/v)) and (Chloroform/ methanol (2:1, v/v)). Biochemical evaluations of algal species were carried out by estimating biomass, lipid, biodiesel and sediment (glycerin and pigments) percentages. Hexane/ ether (1:1, v/v) extraction so...

  2. Enzymatic Production of FAME Biodiesel with Soluble Lipases

    DEFF Research Database (Denmark)

    T. Gundersen, Maria; Heltborg, Carsten Kirstejn; Yang, V;

    Biodiesel is a viable alternative to fossil fuels, and biocatalysis is gaining interest as a greener process. We focus on converting oils to Fatty Acid Methyl Ester (FAME) using soluble lipases, which offer an advantage compared to immobilized enzymes by cost efficiency and ease of implementation...... the defined operating space concerning: temperature, water content, initial methanol concentration and enzyme content. The identified optimum range was experimentally evaluated, and model findings were confirmed. Another barrier in lipase use in biodiesel production is the higher melting point (m...

  3. Mechanistic Modelling of Biodiesel Production using a Liquid Lipase Formulation

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Hofmann, Björn; Silva, Vanessa T. L.;

    2014-01-01

    , with respect to the industrial production of biodiesel. The developed kinetic model, coupled with a mass balance of the system, was fitted to and validated on experimental results for the fed-batch transesterification of rapeseed oil. The confidence intervals of the parameter estimates, along...... that constrains the amount of methanol in the reactor was computed and the predictions experimentally validated. Monte-Carlo simulations were then used to characterize the effect of the parameter uncertainty on the model outputs, giving a biodiesel yield, based on the mass of oil, of 90.8 ± 0.55 mass %. © 2014...

  4. Production of Biodiesel from Shea Butter Oil using Homogeneous Catalysts

    Directory of Open Access Journals (Sweden)

    Jude EJEH

    2014-02-01

    Full Text Available An investigation into the production of biodiesel from shea butter oil using homogenous catalyst was carried out. The properties of the oil obtained were first determined, having an FFA value of 2.279 amongst other properties. Thus, the direct base-catalysis method was used, with potassium hydroxide as the catalyst. In a 1 hour batch run, biodiesel was produced with a conversion of 92%, FAME content of 97.1%, cetane number of 46.84 and kinematic viscosity of 4.30mm2/s, conforming to ASTM D6751 and EN 14214 international standards. As such, it was established that shea butter biodiesel could be produced by the direct base catalysis, over a shorter time with low cost chemicals.

  5. Biodiesel Production by Reactive Flash: A Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Alejandro Regalado-Méndez

    2016-01-01

    Full Text Available Reactive flash (RF in biodiesel production has been studied in order to investigate steady-state multiplicities, singularities, and effect of biodiesel quality when the RF system approaches to bubble point. The RF was modeled by an index-2 system of differential algebraic equations, the vapor split (ϕ was computed by modified Rachford-Rice equation and modified Raoult’s law computed bubble point, and the continuation analysis was tracked on MATCONT. Results of this study show the existence of turning points, leading to a unique bubble point manifold, (xBiodiesel,T=(0.46,478.41 K, which is a globally stable flashing operation. Also, the results of the simulation in MATLAB® of the dynamic behavior of the RF show that conversion of triglycerides reaches 97% for a residence time of 5.8 minutes and a methanol to triglyceride molar flow ratio of 5 : 1.

  6. Biodiesel Production from Bulk Frying Oil with Ultrasound Assisted

    Directory of Open Access Journals (Sweden)

    Widayat

    2013-07-01

    Full Text Available The objective of this research is to optimize of biodiesel production with ultrasound assisted. Optimization was used central composite design methods. Biodiesel was produced from frying oil with KOH catalyst and ultrasonic assisted. The variables were investigated temperature, catalyst concentration and ratio of methanol to oil. Biodiesel was separated from reactant and impurities with decantation process and distillation process. The results of research obtained optimum conversion 85.95% in operation condition are methanol/oil 5.05:1, catalyst concentration 1.65% and temperature reaction 50°C. Mathematic modeling for describe in this process like expressed; Y = 86.2107 - 7.4287X1 + 1.0661X2 + 0.6289X3 - 2.5319X12 - 2.0603X22 - 1.0618X32.

  7. Microalgae Isolation and Selection for Prospective Biodiesel Production

    OpenAIRE

    Van Thang Duong; Yan Li; Ekaterina Nowak; Schenk, Peer M.

    2012-01-01

    Biodiesel production from microalgae is being widely developed at different scales as a potential source of renewable energy with both economic and environmental benefits. Although many microalgae species have been identified and isolated for lipid production, there is currently no consensus as to which species provide the highest productivity. Different species are expected to function best at different aquatic, geographical and climatic conditions. In addition, other value-added products ar...

  8. Microalgae Isolation and Selection for Prospective Biodiesel Production

    OpenAIRE

    Schenk, Peer M.; Ekaterina Nowak; Van Thang Duong; Yan Li

    2012-01-01

    Biodiesel production from microalgae is being widely developed at different scales as a potential source of renewable energy with both economic and environmental benefits. Although many microalgae species have been identified and isolated for lipid production, there is currently no consensus as to which species provide the highest productivity. Different species are expected to function best at different aquatic, geographical and climatic conditions. In addition, other value-added products ar...

  9. Heterogeneous catalysis for biodiesel production from Jatropha curcas oil (JCO)

    International Nuclear Information System (INIS)

    This work focuses on the development of heterogeneous catalysts for biodiesel production from high free fatty acid (FFA) containing Jatropha curcas oil (JCO). Solid base and acid catalysts were prepared and tested for transesterification in a batch reactor under mild reaction conditions. Mixtures of solid base and acid catalysts were also tested for single-step simultaneous esterification and transesterification. More soap formation was found to be the main problem for calcium oxide (CaO) and lithium doped calcium oxide (Li-CaO) catalysts during the reaction of jatropha oil and methanol than for the rapeseed oil (RSO). CaO with Li doping showed increased conversion to biodiesel than bare CaO as a catalyst. La2O3/ZnO, La2O3/Al2O3 and La0.1Ca0.9MnO3 catalysts were also tested and among them La2O3-ZnO showed higher activity. Mixture of solid base catalysts (CaO and Li-CaO) and solid acid catalyst (Fe2(SO4)3) were found to give complete conversion to biodiesel in a single-step simultaneous esterification and transesterification process. -- Highlights: →Various heterogeneous catalysts for conversion of high free fatty acid (FFA) containing jatropha oil to biodiesel.→First ever approach with simultaneous esterification and transesterification using solid base and solid acid catalysts.→Characterization of surface properties of catalysts and the properties of the oil and biodiesel.→Experimental validation and biodiesel production under mild reaction conditions.

  10. Ultrasound assisted intensification of biodiesel production using enzymatic interesterification.

    Science.gov (United States)

    Subhedar, Preeti B; Gogate, Parag R

    2016-03-01

    Ultrasound assisted intensification of synthesis of biodiesel from waste cooking oil using methyl acetate and immobilized lipase obtained from Thermomyces lanuginosus (Lipozyme TLIM) as a catalyst has been investigated in the present work. The reaction has also been investigated using the conventional approach based on stirring so as to establish the beneficial effects obtained due to the use of ultrasound. Effect of operating conditions such as reactant molar ratio (oil and methyl acetate), temperature and enzyme loading on the yield of biodiesel has been investigated. Optimum conditions for the conventional approach (without ultrasound) were established as reactant molar ratio of 1:12 (oil:methyl acetate), enzyme loading of 6% (w/v), temperature of 40 °C and reaction time of 24 h and under these conditions, 90.1% biodiesel yield was obtained. The optimum conditions for the ultrasound assisted approach were oil to methyl acetate molar ratio of 1:9, enzyme loading of 3% (w/v), and reaction time of 3 h and the biodiesel yield obtained under these conditions was 96.1%. Use of ultrasound resulted in significant reduction in the reaction time with higher yields and lower requirement of the enzyme loading. The obtained results have clearly established that ultrasound assisted interesterification was a fast and efficient approach for biodiesel production giving significant benefits, which can help in reducing the costs of production. Reusability studies for the enzyme were also performed but it was observed that reuse of the catalyst under the optimum experimental condition resulted in reduced enzyme activity and biodiesel yield.

  11. Microalgae Isolation and Selection for Prospective Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Peer M. Schenk

    2012-06-01

    Full Text Available Biodiesel production from microalgae is being widely developed at different scales as a potential source of renewable energy with both economic and environmental benefits. Although many microalgae species have been identified and isolated for lipid production, there is currently no consensus as to which species provide the highest productivity. Different species are expected to function best at different aquatic, geographical and climatic conditions. In addition, other value-added products are now being considered for commercial production which necessitates the selection of the most capable algae strains suitable for multiple-product algae biorefineries. Here we present and review practical issues of several simple and robust methods for microalgae isolation and selection for traits that maybe most relevant for commercial biodiesel production. A combination of conventional and modern techniques is likely to be the most efficient route from isolation to large-scale cultivation.

  12. A techno-economic analysis of biodiesel production from microalgae

    NARCIS (Netherlands)

    Olivieri, G.; Guida, T.; Salatino, P.; Marzocchella, A.

    2013-01-01

    The preliminary assessment of a cost-effective flow-sheet for the production of biodiesel from microalgae lipid fraction was carried out. The study was based on approximated cost-estimation methods integrated with the simulation software Aspen Plus (R). Several scenarios were investigated to compare

  13. PRODUCTION OF BIODIESEL FROM ALGAE APPLIED TO AGRICULTURAL WASTEWATER TREATMENT

    Science.gov (United States)

    With increasing dependence on foreign oil, escalating energy prices, and persistent air and water pollution associated with energy production, the U.S. is in need of a clean-burning renewable energy sources. Biodiesel is a rapidly expanding alternative fuel that has the po...

  14. Production of Biodiesel Using Ethanol Way and Alkaline Catalyst

    Directory of Open Access Journals (Sweden)

    Cesar Aparecido da Silva

    2010-06-01

    Full Text Available The potential inputs to promote the supply of the demand for power generation has become the aim of several scientific researches to mitigate environmental impacts. The biodiesel is the highlight solution that can be obtained through the transesterification process. The aim this present work was the biodiesel production using ethanol and crude oil sunflower as inputs and potassium ethoxide such as catalyst for the rection. Were produced seven samples using different parameters. The product with high rate of ethyl ester was the one with catalyst and reaction time optimized. However, it has showed the presence of glycerol, suggesting the use of other unit operations such as cooling and centrifugation to improve the purity of the biodiesel formed is necessary. The parameters used in this experiment (oil, catalyst and water washing contents, reaction time, temperature and agitation speed showed critical endpoints to be monitored during the production of biodiesel due interfering the quality and yield to the final product. In addition, the inappropriate speed of agitation in the reactor for ethanol way in the presence of an alkaline catalyst can gelatinize the mixture of reactants due the emulsion formed.

  15. Fast biodiesel production from beef tallow with radio frequency heating

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Shaoyang; Wang, Yifen [Biosystems Engineering Department, Auburn University, 200 Tom E. Corley Building, Auburn, AL 36849-5417 (United States); Oh, Jun-Hyun [Department of Plant Science and Technology, Sangmyung University (Korea, Republic of); Herring, Josh L. [Department of Food and Animal Sciences, Alabama A and M University, Normal, AL 35762 (United States)

    2011-03-15

    Efficient biodiesel production from beef tallow was achieved with radio frequency (RF) heating. A conversion rate of 96.3 {+-} 0.5% was obtained with a NaOH concentration of 0.6% (based on tallow), an RF heating for 5 min, and a methanol/tallow molar ratio of 9:1. Response surface methodology was employed to evaluate the influence of NaOH dose, RF heating time, and methanol/tallow ratio. The alkaline concentration showed the largest positive impact on the conversion rate. Similar fast conversion from canola oil to biodiesel was achieved in our previous work, indicating that RF heating, as an accelerating technique for biodiesel production, had a large applying area. Viscosities of biodiesel products from beef tallow and canola oil were measured as 5.23 {+-} 0.01 and 4.86 {+-} 0.01 mm{sup 2} s{sup -1}, respectively, both meeting the specification in ASTM D6751 (1.9-6.0 mm{sup 2} s{sup -1}). (author)

  16. Biodiesel production through transesterification over natural calciums

    Energy Technology Data Exchange (ETDEWEB)

    Ngamcharussrivichai, Chawalit [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Phyathai Rd., Patumwan, Bangkok 10330 (Thailand); Center of Excellence for Petroleum, Petrochemicals and Advanced Materials, Chulalongkorn University, Phyathai Rd., Patumwan, Bangkok 10330 (Thailand); Nunthasanti, Pramwit; Tanachai, Sithikorn; Bunyakiat, Kunchana [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Phyathai Rd., Patumwan, Bangkok 10330 (Thailand)

    2010-11-15

    Transesterification of palm kernel oil (PKO) with methanol over various natural calciums, including limestone calcite, cuttlebone, dolomite, hydroxyapatite, and dicalcium phosphate, has been investigated at 60 C and 1 atm. The study showed that dolomite, mainly consisting of CaCO{sub 3} and MgCO{sub 3}, is the most active catalyst. The calcination temperature largely affected the physicochemical properties, as evidenced by N{sub 2} adsorption-desorption measurement, TGA, SEM and XRD, and the transesterification performance of the resultant catalysts. It was found that the calcination of dolomite at 800 C resulted in a highly active mixed oxide. CaO was suggested to be the catalytically active site responsible for the methyl ester formation. Under the suitable reaction conditions, the amount of dolomite calcined at 800 C = 6 wt.% based on the weight of oil, the methanol/oil molar ratio = 30, and the reaction time = 3 h, the methyl ester content of 98.0% can be achieved. The calcined dolomite can be reused many times. The analyses of some important fuel properties indicated that the biodiesel produced had the properties that meet the standard of biodiesel and diesel fuel issued by the Department of Energy Business, Ministry of Energy, Thailand. (author)

  17. Current Status and Prospects of Biodiesel Production from Microalgae

    OpenAIRE

    Yuhuan Liu; Rongsheng Ruan; Zhenyi Du; Xiaodan Wu

    2012-01-01

    Microalgae represent a sustainable energy source because of their high biomass productivity and ability to remove air and water born pollutants. This paper reviews the current status of production and conversion of microalgae, including the advantages of microalgae biodiesel, high density cultivation of microalgae, high-lipid content microalgae selection and metabolic control, and innovative harvesting and processing technologies. The key barriers to commercial production of microalgae biodie...

  18. Semi-arid development: competitiveness factors in biodiesel productive chain

    OpenAIRE

    Breno Barros Telles do Carmo; Dmontier Pinheiro Aragão; Heráclito Lopes Jaguaribe Pontes; Bruno Magalhães Ribeiro; Marcos Ronaldo Albertin

    2009-01-01

    The new global market competitiveness considerer the competition between productive chains (PC) or supply chains, not just between enterprises. In this case, it can be observed collaboration and cooperation enterprises that dispute with others productives chain. The PC competitiveness can be impaired if is subject by inhibitors factors, that can impairer the performance. This paper analyses these competitiveness factors inhibitors in biodiesel productive chain (CPB) in semi-arid area: exporte...

  19. Sustaining Biodiesel Production via Value-Added Applications of Glycerol

    OpenAIRE

    Omotola Babajide

    2013-01-01

    The production of biofuels worldwide has been significant lately due to the shift from obtaining energy from nonrenewable energy (fossil fuels) to renewable sources (biofuels). This energy shift arose as a result of the disturbing crude petroleum price fluctuations, uncertainties about fossil fuel reserves, and greenhouse gas (GHG) concerns. With the production of biofuels increasing considerably and the current global biodiesel production from different feedstock, reaching about 6 billion l...

  20. Technoeconomic analysis of an integrated microalgae photobioreactor, biodiesel and biogas production facility

    International Nuclear Information System (INIS)

    As fossil fuel prices increase and environmental concerns gain prominence, the development of alternative fuels from biomass has become more important. Biodiesel produced from microalgae is becoming an attractive alternative to share the role of petroleum. Currently it appears that the production of microalgal biodiesel is not economically viable in current environment because it costs more than conventional fuels. Therefore, a new concept is introduced in this article as an option to reduce the total production cost of microalgal biodiesel. The integration of biodiesel production system with methane production via anaerobic digestion is proved in improving the economics and sustainability of overall biodiesel stages. Anaerobic digestion of microalgae produces methane and further be converted to generate electricity. The generated electricity can surrogate the consumption of energy that require in microalgal cultivation, dewatering, extraction and transesterification process. From theoretical calculations, the electricity generated from methane is able to power all of the biodiesel production stages and will substantially reduce the cost of biodiesel production (33% reduction). The carbon emissions of biodiesel production systems are also reduced by approximately 75% when utilizing biogas electricity compared to when the electricity is otherwise purchased from the Victorian grid. The overall findings from this study indicate that the approach of digesting microalgal waste to produce biogas will make the production of biodiesel from algae more viable by reducing the overall cost of production per unit of biodiesel and hence enable biodiesel to be more competitive with existing fuels. (author)

  1. TECHNOLOGIES OF SYNTHESIS OF ORGANIC SUBSTANCES BY MICROORGANISMS USING WASTE BIODIESEL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Pirog T. P.

    2015-08-01

    Full Text Available We describe here literature and our experimental data concerning microbial synthesis using waste biodiesel production, mono- and dihydric alcohols (1,3-propanediol, 2,3-butanediol, butanol, ethanol, polyols (mannitol, erythritol, arabitol, organic acids (citric, succinic, lactic, glyceric, polymers and compounds with a complex structure (polysaccharides, polyhydroxyalkanoates, surfactants, cephalosporin, cyanocobalamin. In some mentioned cases recombinant producer strains were used. It was shown that due to the presence of potential inhibitors in the composition of technical (crude glycerol (methanol, sodium and potassium salts, the efficiency of synthesis of most microbial products on such a substrate is lower than on the purified glycerol. However, the need of utilization of this toxic waste (storage and processing of crude glycerol is a serious environmental problem due to the high alkalinity and the content of methanol in it, compensates the lower rates of synthesis of the final product. Furthermore, currently considering the volumes of crude glycerol formed during the production of biodiesel, microbial technologies are preferred for its utilization, allowing realizing biosynthesis of practically valuable metabolites in the environment with the highest possible concentration of this waste. Using of crude glycerol as a substrate will reduce the cost of products of microbial synthesis and increase the profitability of biodiesel production.

  2. Biodiesel production from corn oil by transesterification process

    International Nuclear Information System (INIS)

    There is much political demand and economic pressure to convert agricultural surpluses into material, such as motor fuel, in which the world is deficient. Transport industry is primary consumer of crude oil. Due to scarcity of known petroleum reserves, the possible alternative fuel for use in present engine technology is biofuels. Europe, USA and Brazil are successfully using biofuels. Biofuels causes less environmental pollution as compared to normal petro fuels. As a fuel, ethanol (gasohol) is used in internal combustion engine while methyester (Biodiesel) is used in diesel engines with same or better performance as compared to petro fuels. Corn is very valuable crop with numerous industrial applications, and is used in more than 300 modern industries, including the manufacture of textiles, paper, adhesives, insecticides, paints, soaps, explosives and many more. Presently the biggest source of ethanol production is from corn (produced by USA). Edible oil can also be extracted from corn which is normally used for cooking and it can be used for biodiesel production. Many countries are experimenting on fats and oil to get feasible data for production of biodiesel. Presently USA prefer to use soybean oil as raw material for commercial production of biodiesel while in Europe rapeseed oil is preferred, so therefore, it depends upon the availability of raw material in particular area and may change from location to location. In Pakistan we started with corn oil to produce biodiesel by transesterification method. In present study different design parameters such as effect of temperature, catalyst concentration, molar ratio, and Stirrer speed were founded for better conversion of neat and used corn oil into biodiesel. The optimum parameters proposed for neat corn oil are 0.5% of catalyst based on weight of corn oil, temperature between 50 deg. C to 60 deg. C, reaction time 15 minutes, molar ratio of 6:1 and speed of stirrer 155 rpm. In case of used corn oil high catalyst

  3. International biodiesel markets. Developments in production and trade

    Energy Technology Data Exchange (ETDEWEB)

    Lamers, P. [Ecofys Germany, Berlin (Germany)

    2012-01-15

    The global biodiesel market has shown an exponential growth in production and trade across the past decade. Nowadays, more biodiesel than ever before is sourced from abroad and procurement areas - especially of large scale producers and traders - span the globe. While this trend is bound to continue, markets and trade developments are still strongly linked to support and trade policies. Furthermore, the biodiesel industry is strongly linked to other sectors (agriculture and mineral oil industry in particular) and faces significant market disturbances some of which have led to various inefficiencies in the past. Due to the pace of this market development, a methodological assessment and understanding of the numerous influencing factors was needed to reduce uncertainties and risks for those involved. A recently published analysis by Ecofys and the Copernicus Institute, Utrecht University, provided such an analysis. It evaluates how the interaction of domestic policies steered global trade streams towards different markets, in particular in connection to underlying trade policies and additional market forces, over the past decade. It provides robust data on international production and trade volumes which have already served as input to the recently published Special Report on Renewable Energy (SRREN) by the Intergovernmental Panel on Climate Change (IPCC). This market brochure was commissioned by UFOP to build upon the methodologies and findings of Lamers et al. and to provide a picture of the global biodiesel market in 2010/2011. It is structured in six sections: an overview of global production volumes (Section 2); developments of EU (Section 3) and other world (Section 4) markets and (trade) policies; global net trade volumes (Section 5); vegetable oil trade patterns and their link to biodiesel trade (Section 6); Conclusions and Outlook (Section 7)

  4. Production of Biodiesel through Transesterification of Avocado (Persea gratissima) Seed Oil Using Base Catalyst

    OpenAIRE

    H. M. Rachimoellah; Dyah Ayu Resti; Ali Zibbeni; I Wayan Susila

    2009-01-01

    Biodiesel is produced through a chemical process called transesterification, which refers to a catalysed chemical reaction involving vegetable oil and alcohol to yield fatty acid alkyl esters (biodiesel) and glycerol as a by product. Biodiesel is petroleum substitution in which its quantity continually decreases due to increasing of demand. Plenty of plants could be used as raw material for biodiesel, for example is avocado (Persea gratissima) seed. This is a waste that being thrown out after...

  5. Les biocarburants en Argentine : facteurs et enjeux de la production de biodiesel de soja

    OpenAIRE

    Guibert Martine; Carrizo Silvina Cecilia

    2012-01-01

    In 2006, Argentina has sanctioned a national law to regulate biofuel production and consumption. Since 2007, soybean actors started producing biodiesel for international market -especially to Europe- and the country quickly became the major biodiesel exporter. In 2010, around twenty processing units started supplying the domestic market. Diesel sold in Argentina contained 5% of biodiesel. The obligation to add 5% of biodiesel to diesel has passed to 7% and the goal is to increase this percent...

  6. Production of Biodiesel from Lipid of Phytoplankton Chaetoceros calcitrans through Ultrasonic Method

    OpenAIRE

    Raymond Kwangdinata; Indah Raya; Muhammad Zakir

    2014-01-01

    A research on production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method has been done. In this research, we carried out a series of phytoplankton cultures to determine the optimum time of growth and biodiesel synthesis process from phytoplankton lipids. Process of biodiesel synthesis consists of two steps, that is, isolation of phytoplankton lipids and biodiesel synthesis from those lipids. Oil isolation process was carried out by ultrasonic extracti...

  7. A NOVEL OLEAGINOUS YEAST STRAIN WITH HIGH LIPID PRODUCTIVITY AND ITS APPLICATION TO ALTERNATIVE BIODIESEL PRODUCTION.

    Science.gov (United States)

    Areesirisuk, A; Chiu, C H; Yen, T B; Liu, C H; Guo, J H

    2015-01-01

    Five lipid-producing yeast strains, CHC08, CHC11, CHC28, CHC34, and CHC35, were revealed by Sudan Black B staining to contain lipid droplets within cells. Molecular analysis demonstrated that they were 2 strains of Candida parapsilosis, Pseudozyma parantarctica, Pichia manshurica, and Pichia occidentalis. Following batch fermentation, P. parantarctica CHC28 was found to have the highest biomass concentration, total lipids and lipid content levels. The major fatty acids in the lipids of this yeast strain were C16 and C18. Predictions of the properties of yeast biodiesel using linear equations resulted in values similar to biodiesel made from plant oils. Preliminary production of yeast biodiesel from P. parantarctica CHC28 was accomplished through esterification and transesterification reactions. It was found that yeast lipids with high acid value are easily converted to biodiesel at an approximately 90% yield. Therefore, it is possible to use crude lipids as alternative raw materials for biodiesel production.

  8. Production of Biodiesel from Jatropha Curcas using Nano Materials

    Science.gov (United States)

    Khan, M. Bilal; Bahadar, Ali; Anjum, Waqas

    2009-09-01

    Biodiesel is proving to be a viable clean energy resource for conventional fuel as well as more exotic, value added jet fuel applications. Various non edible agriculture based sources are exploited to produce biodiesel with varying degrees of conversion and properties. Systematic studies carried out to date reveal that the oil extracted from Jatropha Curcas gives best results on yield basis (2800 kg oil/Hectare max). However the research is marred by the production of often undesirable and cumbersome byproducts, which needs multifarious purification steps with associated cost. Sponification step is a main hurdle in the old technology. We have made a paradigm shift by introducing nanomaterials which not only eliminate the cited side reactions/byproducts, but also yield higher conversion and lower costs. Typically we have reduced the reaction time from 90 min at 70° C to a gainful 5 min at ambient temperatures. The nanomaterial has been characterized by SEM and EDS (Electron Dispersion Scanning Analysis) which clearly shows bimodal distribution of the nonmaterial employed. Further characterization study was carried out by FTIR and the results are compared with petrodiesel and standard biodiesel in the important region of 2000-4000 cm-1. Perfect matching/finger printing was achieved. In this work we also report detailed comparative elemental and flash point analysis of the Biodiesel produced via various established roots.

  9. Life cycle assessment of biodiesel production in China.

    Science.gov (United States)

    Liang, Sai; Xu, Ming; Zhang, Tianzhu

    2013-02-01

    This study aims to evaluate energy, economic, and environmental performances of seven categories of biodiesel feedstocks by using the mixed-unit input-output life cycle assessment method. Various feedstocks have different environmental performances, indicating potential environmental problem-shift. Jatropha seed, castor seed, waste cooking oil, and waste extraction oil are preferred feedstocks for biodiesel production in the short term. Positive net energy yields and positive net economic benefits of biodiesel from these four feedstocks are 2.3-52.0% of their life cycle energy demands and 74.1-448.4% of their economic costs, respectively. Algae are preferred in the long term mainly due to their less arable land demands. Special attention should be paid to potential environmental problems accompanying feedstock choice: freshwater use, ecotoxicity potentials, photochemical oxidation potential, acidification potential and eutrophication potential. Moreover, key processes are identified by sensitivity analysis to direct future technology improvements. Finally, supporting measures are proposed to optimize China's biodiesel development. PMID:23238338

  10. Production of Biodiesel from Thumba Oil: Optimization of Process Parameters

    Directory of Open Access Journals (Sweden)

    Ashish Karnwal

    2010-12-01

    Full Text Available Fast depletion of world’s petroleum reserves and increasing ecological concerns has created a great demand for environmentally benign renewable energy resources. Biodiesel has emerged as a sustainable alternative to petroleum origin diesel and its usage have been encouraged by many countries. Transesterification reaction is the most common process to produce biodiesel from variety of vegetable oils and animal fat. Transesterification process depends upon a number of process parameters which are required to be optimized in order to maximize the biodiesel yield. Thumba oil is an underutilized non-edible vegetable oil, available in large quantities in Rajasthan, India and its potential suitability as a biodiesel feedstock is still not evaluated comprehensively. In this research paper, the transesterification process for production of Thumba oil methyl ester has been analyzed and the various process variables like temperature, catalyst concentration, amount of methanol and reaction time have been optimized with the objective to maximize yield. The optimum conditions for transesterification of Thumba oil with methanol and KOH as catalyst were found to be 60°C reaction temperature, 6:1 molar ratio of Thumba oil to methanol, 0.75% catalyst (w/w and 1 hour reaction time.

  11. Waste cooking oil as an alternate feedstock for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Chhetri, A. B.; Rafiqul Islam, M. [Civil and Resources Engineering Dalhousie University, Room D510, 1360 Barrington St., Box 1000, Halifax, N.S. B3J 2X4 (Canada); Watts, K. Ch. [Process Engineering, Dalhousie University, Halifax, NS, Box 1000, Halifax, N.S. B3J 2X4 (Canada)

    2008-07-01

    As crude oil price reach a new high, the need for developing alternate fuels has become acute. Alternate fuels should be economically attractive in order to compete with currently used fossil fuels. In this work, biodiesel (ethyl ester) was prepared from waste cooking oil collected from a local restaurant in Halifax, Nova Scotia, Canada. Ethyl alcohol with sodium hydroxide as a catalyst was used for the transesterification process. The fatty acid composition of the final biodiesel esters was determined by gas chromatography. The biodiesel was characterized by its physical and fuel properties including density, viscosity, acid value, flash point, cloud point, pour point, cetane index, water and sediment content, total and free glycerin content, diglycerides and monoglycerides, phosphorus content and sulfur content according to ASTM standards. The viscosity of the biodiesel ethyl ester was found to be 5.03 mm{sup 2}/sec at 40 {sup o}C. The viscosity of waste cooking oil measured in room temperature (at 21 {sup o}C) was 72 mm{sup 2}/sec. From the tests, the flash point was found to be 164 {sup o}C, the phosphorous content was 2 ppm, those of calcium and magnesium were 1 ppm combined, water and sediment was 0 %, sulfur content was 2 ppm, total acid number was 0.29 mg KOH/g, cetane index was 61, cloud point was -1 {sup o}C and pour point was -16 {sup o}C. Production of biodiesel from waste cooking oils for diesel substitute is particularly important because of the decreasing trend of economical oil reserves, environmental problems caused due to fossil fuel use and the high price of petroleum products in the international market. (author)

  12. Waste Cooking Oil as an Alternate Feedstock for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    M. Rafiqul Islam

    2008-04-01

    Full Text Available As crude oil price reach a new high, the need for developing alternate fuels has become acute. Alternate fuels should be economically attractive in order to compete with currently used fossil fuels. In this work, biodiesel (ethyl ester was prepared from waste cooking oil collected from a local restaurant in Halifax, Nova Scotia, Canada. Ethyl alcohol with sodium hydroxide as a catalyst was used for the transesterification process. The fatty acid composition of the final biodiesel esters was determined by gas chromatography. The biodiesel was characterized by its physical and fuel properties including density, viscosity, acid value, flash point, cloud point, pour point, cetane index, water and sediment content, total and free glycerin content, diglycerides and monoglycerides, phosphorus content and sulfur content according to ASTM standards. The viscosity of the biodiesel ethyl ester was found to be 5.03 mm2/sec at 40oC. The viscosity of waste cooking oil measured in room temperature (at 21° C was 72 mm2/sec. From the tests, the flash point was found to be 164oC, the phosphorous content was 2 ppm, those of calcium and magnesium were 1 ppm combined, water and sediment was 0 %, sulfur content was 2 ppm, total acid number was 0.29 mgKOH/g, cetane index was 61, cloud point was -1oC and pour point was -16oC. Production of biodiesel from waste cooking oils for diesel substitute is particularly important because of the decreasing trend of economical oil reserves, environmental problems caused due to fossil fuel use and the high price of petroleum products in the international market.

  13. Calophyllum inophyllum L. as a future feedstock for bio-diesel production

    Energy Technology Data Exchange (ETDEWEB)

    Atabania, A.E. [Department of Mechanical Engineering, University of Khartoum (Sudan)], email: a_atabani2@msn.com, email: ardinsu@yahoo.co.id; Silitonga, A.S.; Mahlia, T.M.I.; Masjukia, H.H.; Badruddin, I.A. [University of Malaya (Malaysia)

    2011-07-01

    Due to the energy crisis and the concerns about climate change, the possibility of using biodiesel as an alternative energy resource has been examined. It has been found that biodiesel could be a solution for the future but the first generation of biodiesel, prepared from edible vegetable oils, has raised important concerns about food and environmental problems. The aim of this study is to assess if Calophyllum inophyllum, a non-edible oil, could be used for biodiesel production. Density, kinematic viscosity, cetane number, flashpoint and iodine value were determined on Calophyllum inophyllum trees from Cilacap, Indonesia and compared in light of ASTM D6751 biodiesel standards. It was found that Calophyllum inophyllum would be a satisfactory feedstock to produce biodiesel in the future. This study demonstrated that Calophyllum inophyllum has the potential to be a biodiesel feedstock and further research should be carried out on engine performance, combustion and emission performance of biodiesel produced from Calophyllum inophyllum.

  14. Bio-Diesel production and Effect of Catalytic Converter on Emission performance with Bio-Diesel Blends

    Directory of Open Access Journals (Sweden)

    R.Murali Manohar

    2010-06-01

    Full Text Available Bio-Diesel the word itself defines almost all the features of the Bio-Diesel literary. In the Era of this Global Warming where the people are making their living more and more comfortable and they are deteriorating the environment also. The uses of the automobiles with the conventional source of fuel leads to the production of the toxic gaseous substances like carbon monoxide, carbon dioxide, oxides of nitrogen, oxide of sulphur, hydro-carbons etc. The limitation comes with the rise in the price of the fuel as well as the produce of the green house gases as the exhaust gas. In the present study, a new method has been employed to produce Bio-Diesel in a homely basis. Theproduction of the Bio-Diesel is done by using Bio-Diesel processor. It requires the used vegetable oil, methanol and the lye with the accurate proportionate. Generally, emissions of regulated compounds changed linearly with the blend level. The objective is to detect any posit ive or negative effects depending on blend levels, because conventional diesel fuel and biodiesel can be blended in every ratio. The known positive and negative effects of biodiesel varied accordingly and investigate the effect of Catalytic Converter on emission performance with Bio- Diesel Blends.

  15. Utilization of biodiesel by-products for mosquito control.

    Science.gov (United States)

    Pant, Megha; Sharma, Satyawati; Dubey, Saurabh; Naik, Satya Narayan; Patanjali, Phool Kumar

    2016-03-01

    The current paper has elaborated the efficient utilization of non-edible oil seed cakes (NEOC), by-products of the bio-diesel extraction process to develop a herbal and novel mosquitocidal composition against the Aedes aegypti larvae. The composition consisted of botanical active ingredients, inerts, burning agents and preservatives; where the botanical active ingredients were karanja (Pongamia glabra) cake powder and jatropha (Jatropha curcas) cake powder, products left after the extraction of oil from karanja and jatropha seed. The percentage mortality value recorded for the combination with concentration, karanja cake powder (20%) and jatropha cake powder (20%), 1:1 was 96%. The coil formulations developed from these biodiesel by-products are of low cost, environmentally friendly and are less toxic than the synthetic active ingredients. PMID:26296531

  16. Utilization of biodiesel by-products for mosquito control.

    Science.gov (United States)

    Pant, Megha; Sharma, Satyawati; Dubey, Saurabh; Naik, Satya Narayan; Patanjali, Phool Kumar

    2016-03-01

    The current paper has elaborated the efficient utilization of non-edible oil seed cakes (NEOC), by-products of the bio-diesel extraction process to develop a herbal and novel mosquitocidal composition against the Aedes aegypti larvae. The composition consisted of botanical active ingredients, inerts, burning agents and preservatives; where the botanical active ingredients were karanja (Pongamia glabra) cake powder and jatropha (Jatropha curcas) cake powder, products left after the extraction of oil from karanja and jatropha seed. The percentage mortality value recorded for the combination with concentration, karanja cake powder (20%) and jatropha cake powder (20%), 1:1 was 96%. The coil formulations developed from these biodiesel by-products are of low cost, environmentally friendly and are less toxic than the synthetic active ingredients.

  17. Direct Biodiesel Production from Wet Microalgae Biomass of Chlorella pyrenoidosa through In Situ Transesterification

    OpenAIRE

    Hechun Cao; Zhiling Zhang; Xuwen Wu; Xiaoling Miao

    2013-01-01

    A one-step process was applied to directly converting wet oil-bearing microalgae biomass of Chlorella pyrenoidosa containing about 90% of water into biodiesel. In order to investigate the effects of water content on biodiesel production, distilled water was added to dried microalgae biomass to form wet biomass used to produce biodiesel. The results showed that at lower temperature of 90°C, water had a negative effect on biodiesel production. The biodiesel yield decreased from 91.4% to 10.3% a...

  18. High Lipid Induction in Microalgae for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Peer M. Schenk

    2012-05-01

    Full Text Available Oil-accumulating microalgae have the potential to enable large-scale biodiesel production without competing for arable land or biodiverse natural landscapes. High lipid productivity of dominant, fast-growing algae is a major prerequisite for commercial production of microalgal oil-derived biodiesel. However, under optimal growth conditions, large amounts of algal biomass are produced, but with relatively low lipid contents, while species with high lipid contents are typically slow growing. Major advances in this area can be made through the induction of lipid biosynthesis, e.g., by environmental stresses. Lipids, in the form of triacylglycerides typically provide a storage function in the cell that enables microalgae to endure adverse environmental conditions. Essentially algal biomass and triacylglycerides compete for photosynthetic assimilate and a reprogramming of physiological pathways is required to stimulate lipid biosynthesis. There has been a wide range of studies carried out to identify and develop efficient lipid induction techniques in microalgae such as nutrients stress (e.g., nitrogen and/or phosphorus starvation, osmotic stress, radiation, pH, temperature, heavy metals and other chemicals. In addition, several genetic strategies for increased triacylglycerides production and inducibility are currently being developed. In this review, we discuss the potential of lipid induction techniques in microalgae and also their application at commercial scale for the production of biodiesel.

  19. PRELIMINARY DESIGN OF OSCILLATORY FLOW BIODIESEL REACTOR FOR CONTINUOUS BIODIESEL PRODUCTION FROM JATROPHA TRIGLYCERIDES

    OpenAIRE

    AZHARI T. I. MOHD. GHAZI; M. F. M. GUNAM RESUL; R. YUNUS; T. C. SHEAN YAW

    2008-01-01

    The concept of a continuous process in producing biodiesel from jatropha oil by using an Oscillatory Flow Biodiesel Reactor (OFBR) is discussed in this paper. It has been recognized that the batch stirred reactor is a primary mode used in the synthesis of biodiesel. However, pulsatile flow has been extensively researcehed and the fundamental principles have been successfully developed upon which its hydrodynamics are based. Oscillatory flow biodiesel reactor offers precise control of mixing b...

  20. Staphylococcus xylosus fermentation of pork fatty waste: raw material for biodiesel production.

    Science.gov (United States)

    Marques, Roger Vasques; Paz, Matheus Francisco da; Duval, Eduarda Hallal; Corrêa, Luciara Bilhalva; Corrêa, Érico Kunde

    2016-01-01

    The need for cleaner sources of energy has stirred research into utilising alternate fuel sources with favourable emission and sustainability such as biodiesel. However, there are technical constraints that hinder the widespread use of some of the low cost raw materials such as pork fatty wastes. Currently available technology permits the use of lipolytic microorganisms to sustainably produce energy from fat sources; and several microorganisms and their metabolites are being investigated as potential energy sources. Thus, the aim of this study was to characterise the process of Staphylococcus xylosus mediated fermentation of pork fatty waste. We also wanted to explore the possibility of fermentation effecting a modification in the lipid carbon chain to reduce its melting point and thereby act directly on one of the main technical barriers to obtaining biodiesel from this abundant source of lipids. Pork fatty waste was obtained from slaughterhouses in southern Brazil during evisceration of the carcasses and the kidney casing of slaughtered animals was used as feedstock. Fermentation was performed in BHI broth with different concentrations of fatty waste and for different time periods which enabled evaluation of the effect of fermentation time on the melting point of swine fat. The lowest melting point was observed around 46°C, indicating that these chemical and biological reactions can occur under milder conditions, and that such pre-treatment may further facilitate production of biodiesel from fatty animal waste. PMID:27266633

  1. Catalytic applications in the production of biodiesel from vegetable oils.

    Science.gov (United States)

    Sivasamy, Arumugam; Cheah, Kien Yoo; Fornasiero, Paolo; Kemausuor, Francis; Zinoviev, Sergey; Miertus, Stanislav

    2009-01-01

    The predicted shortage of fossil fuels and related environmental concerns have recently attracted significant attention to scientific and technological issues concerning the conversion of biomass into fuels. First-generation biodiesel, obtained from vegetable oils and animal fats by transesterification, relies on commercial technology and rich scientific background, though continuous progress in this field offers opportunities for improvement. This review focuses on new catalytic systems for the transesterification of oils to the corresponding ethyl/methyl esters of fatty acids. It also addresses some innovative/emerging technologies for the production of biodiesel, such as the catalytic hydrocracking of vegetable oils to hydrocarbons. The special role of the catalyst as a key to efficient technology is outlined, together with the other important factors that affect the yield and quality of the product, including feedstock-related properties and various system conditions. PMID:19360707

  2. HEAT EXCHANGE NETWORKS IN BIODIESEL PRODUCTION FROM WASTE COOKING OILS

    OpenAIRE

    María Fernanda Laborde; Laura Ivana Orifici; Ana María Pagano; María Cristina Gely

    2014-01-01

    With the objective to aboard one of the challenges in Engineering teaching: It´s the application in professional practice?, along with attending to the actual requirements of achieve energetic efficiency in industrial process and to reuse wastes of food industry, this work, presents the application of heat exchange networks for the resolution of a real case: pre-treatment of waste cooking oils (WCO) withacid catalysis for biodiesel production. Different methods and software are applied to obt...

  3. Optimization of supercritical dimethyl carbonate method for biodiesel production

    OpenAIRE

    Ilham, Zul; Saka, Shiro

    2012-01-01

    Biodiesel could be produced from triglycerides and dimethyl carbonate, instead of the conventional methanol, in this non-catalytic supercritical dimethyl carbonate method. It was demonstrated that, supercritical dimethyl carbonate method successfully converted triglycerides as well as fatty acids to fatty acid methyl esters (FAME) with glycerol carbonate, a higher value by-product compared to the conventional glycerol. The FAME are high in yield, comparable with supercritical methanol method,...

  4. Production and characterization of biodiesel derived from Hodgsonia macrocarpa seed oil

    International Nuclear Information System (INIS)

    Highlights: • The oil content of HM seed was 71.65 wt%. The HM biodiesel yield was 95.46 wt%. • HM biodiesel satisfied ASTM D6751 and EN 14214 standards, with the exception of OS. • The transportation safety and cold flow properties of HM biodiesel were excellent. • After treatment with 400 ppm TBHQ, the OS of HM biodiesel satisfied EN 14214. - Abstract: Using inexpensive and high-quality oil feedstock is an effective means to produce low-cost biodiesel. This work investigated the production and fuel properties of biodiesel derived from Hodgsonia macrocarpa (HM). The oil content of HM seed was 71.65 wt%, which is much higher than that of many potential oil plants. With traditional base-catalyzed transesterification, biodiesel was readily prepared from HM seed oil. The biodiesel yield was 95.46 wt% from HM seed oil. Biodiesel derived from HM met all ASTM D6751 and EN 14214 specifications, except for oxidative stability (OS). The OS specifications of the two biodiesel standards were met after treatment of HM biodiesel with 400 ppm tertbutyl hydroquinone. The biodiesel exhibited excellent transportation safety and cold flow properties, with flash point of 153 °C, pour point of −9 °C, and cold filter plugging point of −7 °C

  5. Biodiesel production from Jatropha curcas: Integrated process optimization

    International Nuclear Information System (INIS)

    Highlights: • The oil obtained from Jatropha curcas fruits has high variability in its properties. • A process for biodiesel production has been developed for small scale projects. • Oil neutralization with the glycerine phase has important advantages. • The glycerine phase and the meal are adequate to produce biogas. - Abstract: Energy obtained from renewable sources has increased its participation in the energy matrix worldwide, and it is expected to maintain this tendency. Both in large and small scales, there have been numerous developments and research with the aim of generating fuels and energy using different raw materials such as alternative crops, algae and lignocellulosic residues. In this work, Jatropha curcas plantation from the North West of Argentina was studied, with the objective of developing integrated processes for low and medium sizes farms. In these cases, glycerine purification and meal detoxification processes represent a very high cost, and usually are not included in the project. Consequently, alternative uses for these products are proposed. This study includes the evaluation of the Jatropha curcas crop during two years, evaluating the yields and oil properties. The solids left after the oil extraction were evaluated as solid fuels, the glycerine and the meal were used to generate biogas, and the oil was used to produce biodiesel. The oil pretreatment was carried out with the glycerine obtained in the biodiesel production process, thus neutralizing the free fatty acid, and decreasing the phosphorous and water content

  6. Semi-arid development: competitiveness factors in biodiesel productive chain

    Directory of Open Access Journals (Sweden)

    Breno Barros Telles do Carmo

    2009-04-01

    Full Text Available The new global market competitiveness considerer the competition between productive chains (PC or supply chains, not just between enterprises. In this case, it can be observed collaboration and cooperation enterprises that dispute with others productives chain. The PC competitiveness can be impaired if is subject by inhibitors factors, that can impairer the performance. This paper analyses these competitiveness factors inhibitors in biodiesel productive chain (CPB in semi-arid area: exported product, market knowledge, competitiveness position, opportunities to aggregate value in chain, cooperation between enterprises, enterprises way of thinking and paternalism by government. It was done this analyses to compare CPB with the world.

  7. Biodiesel Production from Acidified Oils via Supercritical Methanol

    Directory of Open Access Journals (Sweden)

    Jianxin Li

    2011-12-01

    Full Text Available In biodiesel production, the vegetable oil used as raw material for transesterification should be free of water and free fatty acids (FFAs, which may consume catalyst and reduce catalyst efficiency. In this work biodiesel was prepared from acidified oils (AO through a supercritical methanol route, in which the esterification of FFAs and transesterification of glyceride with methanol occurred simultaneously. The effects of the mass ratio of methanol to AO, the operation temperature as well as the water content on the FFAs conversion and glycerol yield were investigated. The results indicated that the FFAs conversion for esterification under the condition of 1:1 methanol/oil ratio, 310 °C and 15 min reaction time reached 98.7%, and the glycerol yield for transesterification under 0.25:1 methanol/oil ratio, 290 °C and 20 min reaction time reached 63.5% respectively.

  8. Biodiesel Production from Waste Coconut Oil in Coconut Milk Manufacturing

    Directory of Open Access Journals (Sweden)

    Sujinna KARNNASUTA

    2013-12-01

    Full Text Available The purpose of this research was to develop a 3 step biodiesel production from waste coconut oil taken from a wastewater pond in a coconut milk manufacturing plant. Special attention was paid to optimizing the first step, acid catalyzed hydrolysis, to convert the waste coconut oil into high free fatty acid oil, 83.32 wt%. The first step was the acid hydrolysis, in order to produce high free fatty acid oil. The optimum condition in acid hydrolysis was 5 % by mass of hydrochloric acid, in order to produce high free fatty acid oil that could be used as raw material for biodiesel production. The second step was the acid esterification, in order to reduce the FFA and convert FFA to methyl ester. The reduction of the FFA from 83.32 % in high free fatty acid oil to less than 2 % required 3 % by mass of hydrochloric acid, a molar ratio of methanol to oil of 10: 1, and a reaction time of 60 min. The alkaline transesterification in the third step was used triglyceride at 1.0wt% of KOH for catalysis, a molar ratio of methanol to oil of 6:1, and a reaction time of 60 min. The waste coconut oil biodiesel was further evaluated by determining its fuel quality, and most of the properties were well within ASTM and EN standards.

  9. Microalga Scenedesmus obliquus as a potential source for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Mandal, Shovon; Mallick, Nirupama [Indian Inst. of Technology, Kharagpur, West Bengal (India). Agricultural and Food Engineering Dept.

    2009-08-15

    Biodiesel from microalgae seems to be the only renewable biofuel that has the potential to completely replace the petroleum-derived transport fuels. Therefore, improving lipid content of microalgal strains could be a cost-effective second generation feedstock for biodiesel production. Lipid accumulation in Scenedesmus obliquus was studied under various culture conditions. The most significant increase in lipid reached 43% of dry cell weight (dcw), which was recorded under N-deficiency (against 12.7% under control condition). Under P-deficiency and thiosulphate supplementation the lipid content also increased up to 30% (dcw). Application of response surface methodology in combination with central composite rotary design (CCRD) resulted in a lipid yield of 61.3% (against 58.3% obtained experimentally) at 0.04, 0.03, and 1.0 g l{sup -1} of nitrate, phosphate, and sodium thiosulphate, respectively for time culture of 8 days. Scenedesmus cells pre-grown in glucose (1.5%)-supplemented N 11 medium when subjected to the above optimized condition, the lipid accumulation was boosted up to 2.16 g l{sup -1}, the value {proportional_to}40-fold higher with respect to the control condition. The presence of palmitate and oleate as the major constituents makes S. obliquus biomass a suitable feedstock for biodiesel production. (orig.)

  10. Lignocellulosic bioethanol potential utilizing subproducts from the biodiesel production process

    Energy Technology Data Exchange (ETDEWEB)

    Visser, Evan Michael; Oliveira Filho, Delly; Toledo, Olga Moraes [Universidade Federal de Vicosa (DEA/UFV), MG (Brazil). Dept. de Engenharia Agricola

    2008-07-01

    Cellulosic ethanol production is one of the most researched fields in today's biofuels industry, and one of the major problems facing the commercial production of cellulosic ethanol is the challenge of collecting biomass. Oil extraction for biodiesel production yields large amounts of cellulose rich biomass sub-products, which in many cases can produce enough ethanol to meet the alcohol demands of transesterification. Soybean, castor bean, Jatropha Curcas, palm kernel, sunflower seed, rapeseed and cottonseed were studied to determine ethanol production potential from their oil extraction co-products and also the capacity to meet transesterification alcohol demands. Nearly all crops studied were capable of producing enough ethanol for biodiesel production and, in the case of palm kernels, 383% of the transesterification demands could be met with cellulosic ethanol production of the proper sub-products. Based on Brazilian yields, Palm kernels have a production potential of 6725 L ha{sup -1} of ethanol followed by Jatropha curcas with 695 L ha{sup -1}. (author)

  11. Reuse of rapeseed by-products from biodiesel production

    Directory of Open Access Journals (Sweden)

    Tajana Krička

    2015-03-01

    Full Text Available The objective of this paper is to investigate usability of rapeseed cake from biodiesel fuel production as an energy source. For this research, rapeseed was grown at the research site of the Faculty of Agriculture in Zagreb, Croatia. The investigated rapeseed cake, residue from cold pressing, was divided in two groups of samples. The first group was a mix of three varieties (Bristol, Express and Navajo, while the other group consisted of three hybrids (Artus, Baldur, Titan. The utilization of rapeseed cake for energy via two routes was evaluated; namely, utilization of rapeseed cake as (1 solid biofuel (pellets with addition of 3% of glycerol, and (2 as substrate in anaerobic digestion (AD. In investigation of cake as solid fuel, proximate (moisture content, ash content, fixed carbon and volatile matter, ultimate (content of carbon, sulphur, hydrogen, oxygen and nitrogen and physical and calometry analyses (abrasion, diameter, length, density, higher and lower heating value were carried out. As for its use in AD, production of biogas during 40 days was monitored with a view of assessing the use of digested residue as fertilizer in agricultural production. Both groups of digested residues were analysed (pH, electroconductivity, moisture content, ash content, content of nitrogen and carbon, C/N ratio, content of P2O5, K2O, Ca, Mg, Na. The analysis indicated that the investigated raw material is usable as solid and gas biofuel, and digested residue as fertilizer in ecological agriculture. The two groups of samples analysed here did not show significant differences.

  12. Environmental benefits of the integrated production of ethanol and biodiesel

    International Nuclear Information System (INIS)

    Highlights: ► Integrated bioenergy systems can favor the sustainability of biofuels. ► We analyzed the integrated production of ethanol and biodiesel in Brazil. ► GHG emissions and fossil energy use in the ethanol life cycle would be reduced. ► Socio-economic and other environmental aspects must be analyzed in future works. -- Abstract: The biorefinery of the future will be an integrated complex that makes a variety of products (e.g., biofuels, chemicals, power and protein) from a variety of feedstocks. The objective of this work was to evaluate the environmental benefits, compared to the traditional sugarcane ethanol system, of the integrated production of ethanol and biodiesel through a sugarcane–soybean biorefinery concept in Brazil. The environmental aspects considered here were the fossil energy use and the greenhouse gases (GHGs) emissions associated with ethanol production. In the Integrated System, soybean would be cultivated in part of the sugarcane reforming areas, which represents ∼17% of the total sugarcane area. Sugarcane and soybean oil would be processed in a combined ethanol–biodiesel plant, which would use only bagasse as fuel. All the demand for utilities of the biodiesel plant would be provided by the distillery. The output products of the combined plant would comprise sugarcane ethanol, soybean biodiesel (which would be used as diesel (B5) substitute in the sugarcane cultivation), bioelectricity and glycerin. The results indicate that the Integrated System can reduce the fossil energy consumption from 75 to 37 kJ/MJ of ethanol, when compared to the traditional system. For GHG emissions, the value would drop from 22.5 to 19.7 g CO2eq/MJ of ethanol. This analysis shows that the Integrated System is an important option to contribute to ethanol’s life cycle independence from fossil resources. This is an attractive environmental aspect, but socio-economic (as well as other environmental) aspects should also be analyzed in order to

  13. Analysis of used frying fats for biodiesel production

    Directory of Open Access Journals (Sweden)

    Dobarganes, M. C.

    2008-03-01

    Full Text Available Used frying fats and oils with highly variable and uncontrolled quality are used for the production of biodiesel . The objective of this study was to define the analytical methods useful to obtaining information on the quality of the used frying oils as raw material for biodiesels as well as for the characterization of the biodiesels obtained from them. Twentyfour used frying oils from restaurants and domestic fryers were analyzed before and after transesterification to fatty acid methyl esters (FAME. From a detailed analysis of the samples by means of a combination of adsorption and size exclusion chromatography, the quantitative importance of polymeric compounds was deduced both from the direct analysis of the oils and from their FAME. Excellent linear correlation between polar compounds and polar FAME (R=0.9768 was found. The possibilities of interferences from polar fatty acid in the standard method to determine the ester content are defined. Finally, determination of non-polar FAME by silica column is proposed as a good alternative to the gas chromatography method.Los aceites y grasas de fritura, que se caracterizan por tener una calidad muy variable, se utilizan como material prima para la producción de biodiesel. El objetivo de este estudio es definir la utilidad de los métodos analíticos desarrollados para los aceites y grasas de fritura para caracterizar el biodiesel obtenido. Veinticuatro aceites de fritura procedentes del sector de restauración y de fritura doméstica fueron analizados antes y después de su transesterificación a ésteres metílicos de ácidos grasos. A partir de un análisis detallado mediante cromatografías de adsorción y exclusión, se deduce la importancia cuantitativa de los compuestos de polimerización tanto en el análisis directo de los aceites como en el análisis de los ésteres metílicos. Se encontró una excelente correlación lineal entre los compuestos polares y los ésteres metílicos polares

  14. Conversion of the biodiesel by-product glycerol by the non-conventional yeast Pachysolen tannophilus

    DEFF Research Database (Denmark)

    Liu, Xiaoying

    The focus on de veloping new renewable energy in the transportation sector by the EU has boosted the production of biodiesel from rapeseed and other vegetable oils in Europe. This has led to an immense increase in the production of glycerol, which is an inevitable byproduct from the biodiesel...... production process. Since the volume of the glycerol by-product has exceeded the current market need, biodiesel producers are looking for new methods for sustainable glycerol management and improving the competitiveness of the biodiesel industries. The EU Commission funded GLYFINERY project is one initiative...

  15. Microbial Conversion of Waste Glycerol from Biodiesel Production into Value-Added Products

    Directory of Open Access Journals (Sweden)

    Hong Liu

    2013-09-01

    Full Text Available Biodiesel has gained a significant amount of attention over the past decade as an environmentally friendly fuel that is capable of being utilized by a conventional diesel engine. However, the biodiesel production process generates glycerol-containing waste streams which have become a disposal issue for biodiesel plants and generated a surplus of glycerol. A value-added opportunity is needed in order to compensate for disposal-associated costs. Microbial conversions from glycerol to valuable chemicals performed by various bacteria, yeast, fungi, and microalgae are discussed in this review paper, as well as the possibility of extending these conversions to microbial electrochemical technologies.

  16. Microalgae as a sustainable energy source for biodiesel production: A review

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, A.L.; Yasin, N.H. Mat; Derek, C.J.C.; Lim, J.K. [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Seberang Perai Selatan, Pulau Pinang (Malaysia)

    2011-01-15

    Of the three generations of biodiesel feedstocks described in this paper, food crops, non-food crops and microalgae-derived biodiesel, it was found that the third generation, microalgae, is the only source that can be sustainably developed in the future. Microalgae can be converted directly into energy, such as biodiesel, and therefore appear to be a promising source of renewable energy. This paper presents a comparison between the use of microalgae and palm oil as biodiesel feedstocks. It was found that microalgae are the more sustainable source of biodiesel in terms of food security and environmental impact compared to palm oil. The inefficiency and unsustainability of the use of food crops as a biodiesel source have increased interest in the development of microalgae species to be used as a renewable energy source. In this paper, the main advantages of using microalgae for biodiesel production are described in comparison with other available feedstocks, primarily palm oil. (author)

  17. Production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method.

    Science.gov (United States)

    Kwangdinata, Raymond; Raya, Indah; Zakir, Muhammad

    2014-01-01

    A research on production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method has been done. In this research, we carried out a series of phytoplankton cultures to determine the optimum time of growth and biodiesel synthesis process from phytoplankton lipids. Process of biodiesel synthesis consists of two steps, that is, isolation of phytoplankton lipids and biodiesel synthesis from those lipids. Oil isolation process was carried out by ultrasonic extraction method using ethanol 96%, while biodiesel synthesis was carried out by transesterification reaction using methanol and KOH catalyst under sonication. Weight of biodiesel yield per biomass Chaetoceros calcitrans is 35.35%. Characterization of biodiesel was well carried out in terms of physical properties which are density and viscosity and chemical properties which are FFA content, saponification value, and iodine value. These values meet the American Society for Testing and Materials (ASTM D6751) standard levels, except for the viscosity value which was 1.14 g · cm(-3).

  18. Direct biodiesel production from wet microalgae biomass of Chlorella pyrenoidosa through in situ transesterification.

    Science.gov (United States)

    Cao, Hechun; Zhang, Zhiling; Wu, Xuwen; Miao, Xiaoling

    2013-01-01

    A one-step process was applied to directly converting wet oil-bearing microalgae biomass of Chlorella pyrenoidosa containing about 90% of water into biodiesel. In order to investigate the effects of water content on biodiesel production, distilled water was added to dried microalgae biomass to form wet biomass used to produce biodiesel. The results showed that at lower temperature of 90°C, water had a negative effect on biodiesel production. The biodiesel yield decreased from 91.4% to 10.3% as water content increased from 0% to 90%. Higher temperature could compensate the negative effect. When temperature reached 150°C, there was no negative effect, and biodiesel yield was over 100%. Based on the above research, wet microalgae biomass was directly applied to biodiesel production, and the optimal conditions were investigated. Under the optimal conditions of 100 mg dry weight equivalent wet microalgae biomass, 4 mL methanol, 8 mL n-hexane, 0.5 M H2SO4, 120°C, and 180 min reaction time, the biodiesel yield reached as high as 92.5% and the FAME content was 93.2%. The results suggested that biodiesel could be effectively produced directly from wet microalgae biomass and this effort may offer the benefits of energy requirements for biodiesel production.

  19. Direct Biodiesel Production from Wet Microalgae Biomass of Chlorella pyrenoidosa through In Situ Transesterification

    Directory of Open Access Journals (Sweden)

    Hechun Cao

    2013-01-01

    Full Text Available A one-step process was applied to directly converting wet oil-bearing microalgae biomass of Chlorella pyrenoidosa containing about 90% of water into biodiesel. In order to investigate the effects of water content on biodiesel production, distilled water was added to dried microalgae biomass to form wet biomass used to produce biodiesel. The results showed that at lower temperature of 90°C, water had a negative effect on biodiesel production. The biodiesel yield decreased from 91.4% to 10.3% as water content increased from 0% to 90%. Higher temperature could compensate the negative effect. When temperature reached 150°C, there was no negative effect, and biodiesel yield was over 100%. Based on the above research, wet microalgae biomass was directly applied to biodiesel production, and the optimal conditions were investigated. Under the optimal conditions of 100 mg dry weight equivalent wet microalgae biomass, 4 mL methanol, 8 mL n-hexane, 0.5 M H2SO4, 120°C, and 180 min reaction time, the biodiesel yield reached as high as 92.5% and the FAME content was 93.2%. The results suggested that biodiesel could be effectively produced directly from wet microalgae biomass and this effort may offer the benefits of energy requirements for biodiesel production.

  20. The Biodiesel Production from Roast Thai Sausage Oil by Transesterification Reaction

    Directory of Open Access Journals (Sweden)

    Wasan Theansuwan

    2011-01-01

    Full Text Available Problem statement: This research is to study the feasibility of biodiesel production from roast Thai sausage oil by transesterification process. Approach: The objective of this study was to investigate the effects of potassium Hydroxide (K2OH3 as heterogeneous catalyst (3-9% (wt of the feedstock and methanol-oil molar ratio (3:1-12:1 on the yield and properties (flash point and fire point of the biodiesel products at 60-°C of reacting temperature. Results: The results showed that the suitable conditions for the production of biodiesel were at 3:1 of methanol-oil molar ratio and at 3% of K2OH3 (wt of the feedstock. It was also found that the maximum biodiesel yields (86.40% on this condition. Conclusion: According to the physical characterisation of the products, it was found that the biodiesel produced in this study showed similar properties to the standard biodiesel (methyl ester.

  1. Cultivating Microalgae in Domestic Wastewater for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Soha S.M. MOSTAFA

    2012-02-01

    Full Text Available The objective of this study was to evaluate the growth of nine species of microalgae (green and blue green microalgae on domestic waste water samples obtained from Zenein Waste Water Treatment Plant (ZWWTP, Giza governorate, Egypt. The species were cultivated in different kind of waste water; before treatment; after sterilization; with nutrients with sterilization and with nutrients without sterilization. The experiment was conducted in triplicate and cultures were incubated at 25�1�C under continuous shaking (150 rpm and illumination (2000 Lux for 15 days. pH, electric conductivity (EC, optical density (OD , dry weight (DW, were done at the time of incubation and at the end of experiment, in addition to determine the percentage of lipid and biodiesel. The data revealed that, domestic waste water with nutrient media (T3 was promising for cultivation of five algal species when compared with conventional media, Moreover, domestic waste water after sterilization (T2 was selected media for cultivation of Oscillatoria sp and Phormedium sp. However, T1 media (waste water without treatment was the promising media for cultivation of Nostoc humifusum. The biodiesel produced from algal species cultivated in waste water media ranged from 3.8 to 11.80% when compared with the conventional method (3.90 to 12.52%. The results of this study suggest that growing algae in nutrient rich media offers a new option of applying algal process in ZWWTP to mange the nutrient load for growth and valuable biodiesel feedstock production.

  2. The economic impact of Canadian biodiesel production on Canadian grains, oilseeds and livestock producers : final report

    International Nuclear Information System (INIS)

    This study was conducted to provide the Canadian Canola Growers Association with an understanding of the economic effects of a mandated use of biodiesel blends produced in Canada, focusing on canola and canola oil. A literature review was performed to determine what has been found elsewhere in terms of biodiesel. An overview of the feedstock markets was also conducted along with an empirical analysis to determine likely feedstock purchasing behaviour under biodiesel blend requirements. The analysis also considered the rendered animal fats industry. The objectives were to identify the economic impacts of biodiesel development; determine the nature of markets for candidate feedstocks that could be used in manufacturing biodiesel; estimate the economic effects of a 2 per cent biodiesel blend requirement in petroleum diesel; estimate the economic effects of a 5 per cent biodiesel blend requirement in petroleum diesel; and, determine the ultimate impact on the Canadian canola industry of the mandated biodiesel blend. It was shown that biodiesel can be made from a range of feedstocks and that the 2 key factors influencing the success of biodiesel manufacturing facilities were feedstock prices and feedstock availability. The key competitors facing canola oil in the biodiesel market are rendered oils, rendered animal fats, palm oil, and soybean oil. Canola and soybean oil are likely to be relatively high cost feedstocks for biodiesel production, while yellow grease, tallow, and palm oil would be better priced as feed for industrial uses. Two conceptions of market dynamic were considered. In the first, the feedstock prices remained constant, while in the other the feedstock prices fluctuated with volume consumed. It was concluded that if total fat and oil supplies are fixed at historic levels, biodiesel blend requirements of just over 2 per cent are feasible. It was concluded that a cluster of widely available, low-priced feedstocks for biodiesel production exists. These

  3. Enhancement of biodiesel production from different species of algae

    Directory of Open Access Journals (Sweden)

    El-Moneim M. R. Afify, Abd

    2010-12-01

    Full Text Available Eight algal species (4 Rhodo, 1 chloro and 1 phaeophycean macroalgae, 1 cyanobacterium and 1 green microalga were used for the production of biodiesel using two extraction solvent systems (Hexane/ether (1:1, v/v and (Chloroform/ methanol (2:1, v/v. Biochemical evaluations of algal species were carried out by estimating biomass, lipid, biodiesel and sediment (glycerin and pigments percentages. Hexane/ ether (1:1, v/v extraction solvent system resulted in low lipid recoveries (2.3-3.5% dry weight while; chloroform/methanol (2: 1, v/v extraction solvent system was proved to be more efficient for lipid and biodiesel extraction (2.5 – 12.5% dry weight depending on algal species. The green microalga Dictyochloropsis splendida extract produced the highest lipid and biodiesel yield (12.5 and 8.75% respectively followed by the cyanobacterium Spirulina platensis (9.2 and 7.5 % respectively. On the other hand, the macroalgae (red, brown and green produced the lowest biodiesel yield. The fatty acids of Dictyochloropsis splendida Geitler biodiesel were determined using gas liquid chromatography. Lipids, biodiesel and glycerol production of Dictyochloropsis splendida Geitler (the promising alga were markedly enhanced by either increasing salt concentration or by nitrogen deficiency with maximum production of (26.8, 18.9 and 7.9 % respectively at nitrogen starvation condition.

    Ocho especies de algas (4 Rhodo, 1 cloro y 1 macroalgas phaeophycean, 1 cianobacteria y 1 microalga verde fueron utilizados para la producción de biodiesel utilizando dos sistemas de extracción con disolventes (hexano/éter (1:1, v/v y (Cloroformo / metanol (2:1, v/v. La evaluación bioquímica de las especies de algas se llevó a cabo mediante la estimación de los porcentajes de biomasa, de lípidos, de biodiesel y de sedimento (glicerina y pigmentos. El sistema extracción con el disolvente hexano/éter (1:1, v

  4. Use of the by-products of the biodiesel productive chain; Aproveitamento dos subprodutos da cadeia produtiva do biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Moebus, Fernando; Almeida, Silvio Carlos Anibal de [Universidade Federal do Rio de Janeiro (DEM/EP/UFRJ), RJ (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica], Emails: f_moebus@polis.ufrj.br, silvioa@gmail.com

    2010-07-01

    This paper performs an economical analysis of the incomes obtained with the using of byproducts of productive chain of bio diesel. Two technologies will be studied as follows: the commercialization of the residues (peels, cake) in the form of briquettes, and glycerin. A cost spreadsheet was developed for quantification the costs for obtain the biodiesel from the different raw-materials in a process of batch. Besides the cost of raw material and others inputs (catalyst and methanol), it will be analysed the main factors that influences the final costs of product a the generated incomes with commercialization of by-products.

  5. Efficiency of the biodiesel production from microalgae

    Science.gov (United States)

    Chernova, N. I.; Kiseleva, S. V.; Popel', O. S.

    2014-06-01

    Biomass of the highly productive algae is a promising nontraditional raw material for biopower engineering, including production of energy and motor fuels from it. The paper presents an analysis of the efficiency of solar energy conversion to microalgae biofuel based both on the general theoretical approaches and on the experimental results obtained in various pilot projects. Some data on the economic efficiency of biofuel production from algae are also discussed. The possible ways to enhance the efficiency of microalgae energy use are formulated.

  6. A Study of Microalgal Symbiotic Communities with the Aim to Increase Biomass and Biodiesel Production

    DEFF Research Database (Denmark)

    Baggesen, Claus

    molecules. A variety of algae can produce large amounts of lipids and these easily be converted to biodiesel for use as transport fuel. Production of algal based biodiesel is however still limited mainly due production costs. Research is needed in order to lower the price of the final product. In this study...

  7. Techno-economic analysis of biodiesel production from Jatropha curcas via a supercritical methanol process

    International Nuclear Information System (INIS)

    Highlights: • This paper presents the techno-economic of a production of biodiesel from JCO. • The results obtained 99.96% of biodiesel with 96.49% of pure glycerol. • This proved that biodiesel from JCO is the least expensive compare to other resources. - Abstract: This paper presents the conceptual design and economic evaluation of a production of methyl esters (biodiesel) from Jatropha curcas oil (JCO) via a supercritical methanol process with glycerol as a by-product. The process consists of four major units: transesterification (PFR), methanol recovery (FT) and (DC1), recovery of glycerol (DEC), and biodiesel purification (DC2). The material and heat balance are also presented here. A biodiesel production of 40,000 tonnes-yr−1 is taken as case study. Biodiesel obtained from supercritical transesterification with Jatropha curcas oil as feedstock resulting in high purity methyl esters (99.96%) with almost pure glycerol (96.49%) obtained as by-product. The biodiesel can be sold at USD 0.78 kg−1, while the manufacturing and capital investment costs are in the range of USD 25.39 million-year−1 and USD 9.41 million year−1, respectively. This study proved that biodiesel from JCO is the least expensive with purities comparable to those found in other studies

  8. Characteristics and composition of Jatropha gossypiifoliaand Jatropha curcas L. oils and application for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    de Oliveira, Jefferson S.; Leite, Polyanna M.; de Souza, Lincoln B.; Mello, Vinicius M.; Rubim, Joel C.; Suarez, Paulo A.Z. [Laboratorio de Materiais e Combustiveis, Instituto de Quimica, Universidade de Brasilia, C.P. 4478, 70919-970 Brasilia, DF (Brazil); Silva, Eid C.; Meneghetti, Simoni M.P. [Instituto de Quimica e Biotecnologia, Universidade Federal de Alagoas, Av. Lourival de Melo Mota, s/n, Cidade Universitaria, 57072-970 Maceio-AL (Brazil)

    2009-03-15

    In this work two genus of the Jatropha family: the Jatropha gossypiifolia (JG) and Jatropha curcas L. (JC) were studied in order to delimitate their potential as raw material for biodiesel production. The oil content in wild seeds and some physical-chemical properties of the oils and the biodiesel obtained from them were evaluated. The studied physical-chemical properties of the JC and JG biodiesel are in acceptable range for use as biodiesel in diesel engines, showing a promising economic exploitation of these raw materials in semi-arid regions. However, further agronomic studies are needed in order to improve the seed production and the crude oil properties. (author)

  9. Non-Edible Plant Oils as New Sources for Biodiesel Production

    OpenAIRE

    M. Rafiqul Islam; K. Chris Watts; Suzanne M Budge; Martin S. Tango; Arjun B. Chhetri

    2008-01-01

    Due to the concern on the availability of recoverable fossil fuel reserves and the environmental problems caused by the use those fossil fuels, considerable attention has been given to biodiesel production as an alternative to petrodiesel. However, as the biodiesel is produced from vegetable oils and animal fats, there are concerns that biodiesel feedstock may compete with food supply in the long-term. Hence, the recent focus is to find oil bearing plants that produce non-edible oils as the f...

  10. Parametric study of the alkali catalyzed transesterification of waste frying oil for Biodiesel production

    International Nuclear Information System (INIS)

    Highlights: • Investigation of waste frying oil as potential source for Biodiesel production. • Optimization of important reaction parameters. • A high yield and conversion of the feedstock to biodiesel. • Determination of fuel properties of the biodiesel produced from used frying oil. - Abstract: Waste frying oil (WFO) conversion to Biodiesel (Biodiesel) by Alkali-catalyzed transesterification was studied. The effect of operating and processing variables e.g. reaction temperature, MeOH/oil ratio, type of catalyst used and its concentration was investigated at different reaction times. Further, the physical and chemical properties of the WFO and the produced methyl ester (Biodiesel) were measured. Results showed that (within the range of variables studied) the optimum conditions for Biodiesel manufacturing were MeOH/oil ratio 0.4 v/v (corresponds to 9.5 M ratio), with 1.0% (% w/v) KOH (corresponds to 0.83% w/w), temperature of 50 °C and reaction time between 20 and 40 min. Under these conditions, the obtained Biodiesel yield was approximately 98%. Results also showed that the viscosity of the obtained Biodiesel was 5.86 mm2/s which is close to that of petrodiesel with an average decrease of 69.5% in comparison with WFO. Furthermore, the iodine value (25.36 g I2/100 g sample) and the density (0.877 g/cm3) of the Biodiesel met the values specified by JUS EN14214

  11. Genetic and chemical evaluation of the U.S. castor germplasm collection for biodiesel production

    Science.gov (United States)

    Castor has multiple industrial applications including potential as a feedstock for biodiesel production. The oil content and fatty acid composition in castor seed are important factors to determine the price for production and affect the key fuel properties of biodiesel. The entire U.S. castor germp...

  12. Biodiesel and biohydrogen production from cotton-seed cake in biorefinery concept

    NARCIS (Netherlands)

    Panagiotopoulos, I.A.; Pasias, S.; Bakker, R.R.C.; Vrije, de G.J.; Papayannakos, N.; Claassen, P.A.M.; Koukios, E.G.

    2013-01-01

    Biodiesel production from cotton-seed cake (CSC) and the pretreatment of the remaining biomass for dark fermentative hydrogen production was investigated. The direct conversion to biodiesel with alkali free fatty acids neutralization pretreatment and alkali transesterification resulted in a biodiese

  13. Bio-Diesel production and Effect of Catalytic Converter on Emission performance with Bio-Diesel Blends

    OpenAIRE

    R.Murali Manohar; M.Prabhahar; Dr.S.Sendil velan

    2010-01-01

    Bio-Diesel the word itself defines almost all the features of the Bio-Diesel literary. In the Era of this Global Warming where the people are making their living more and more comfortable and they are deteriorating the environment also. The uses of the automobiles with the conventional source of fuel leads to the production of the toxic gaseous substances like carbon monoxide, carbon dioxide, oxides of nitrogen, oxide of sulphur, hydro-carbons etc. The limitation comes with the rise in the pr...

  14. Variability in sunflower oil quality for biodiesel production: A simulation study

    International Nuclear Information System (INIS)

    Biodiesel is an alternative fuel made from vegetable oils or animal fats. The fatty acid composition of the feedstock, which varies among and within species, is the main determinant of biodiesel quality. In this work we analyze the variability in biodiesel quality (density, kinematic viscosity, heating value, cetane number and iodine value) obtained from sunflower oil, by means of a validated crop model that predicts the fatty acid composition of one high-oleic, and three traditional (high-linoleic) sunflower hybrids. The model was run with a 10-year average weather data from 56 weather stations in Argentina, and simulation results were compared to the biodiesel standards of Argentina, USA and Europe. We show that biodiesel produced from sunflower oil does not have one fixed quality, but different qualities depending on weather conditions and agricultural practices, and that intraspecific variation in biodiesel quality can be larger than interspecific differences. Our results suggest that (a) sunflower oil from high-oleic hybrids is suitable for biodiesel production (within limits of all analyzed standards), regardless of growing conditions and (b) sunflower oil from traditional hybrids is suitable for biodiesel production under the standards of Argentina and USA, while only certain hybrids grown in warm regions (e.g., Northern Argentina, Southern USA, China, India, Pakistan) are suitable for biodiesel production according to the European standard

  15. Variability in sunflower oil quality for biodiesel production: A simulation study

    Energy Technology Data Exchange (ETDEWEB)

    Pereyra-Irujo, Gustavo A.; Izquierdo, Natalia G.; Quiroz, Facundo; Aguirrezabal, Luis A.N. [Unidad Integrada Balcarce, Facultad de Ciencias Agrarias, Universidad Nacional de Mar del Plata, Instituto Nacional de Tecnologia Agropecuaria, CC 276, 7620 Balcarce, Buenos Aires (Argentina); Covi, Mauro [Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Intendente Gueiraldes 2160, Ciudad Universitaria, C1428EGA, Buenos Aires (Argentina); Nolasco, Susana M. [Facultad de Ingenieria, Universidad Nacional del Centro de la Provincia de Buenos Aires, Avda. del Valle 7537, B7400JWI, Olavarria (Argentina)

    2009-03-15

    Biodiesel is an alternative fuel made from vegetable oils or animal fats. The fatty acid composition of the feedstock, which varies among and within species, is the main determinant of biodiesel quality. In this work we analyze the variability in biodiesel quality (density, kinematic viscosity, heating value, cetane number and iodine value) obtained from sunflower oil, by means of a validated crop model that predicts the fatty acid composition of one high-oleic, and three traditional (high-linoleic) sunflower hybrids. The model was run with a 10-year average weather data from 56 weather stations in Argentina, and simulation results were compared to the biodiesel standards of Argentina, USA and Europe. We show that biodiesel produced from sunflower oil does not have one fixed quality, but different qualities depending on weather conditions and agricultural practices, and that intraspecific variation in biodiesel quality can be larger than interspecific differences. Our results suggest that (a) sunflower oil from high-oleic hybrids is suitable for biodiesel production (within limits of all analyzed standards), regardless of growing conditions and (b) sunflower oil from traditional hybrids is suitable for biodiesel production under the standards of Argentina and USA, while only certain hybrids grown in warm regions (e.g., Northern Argentina, Southern USA, China, India, Pakistan) are suitable for biodiesel production according to the European standard. (author)

  16. Modelling and operation of reactors for enzymatic biodiesel production

    DEFF Research Database (Denmark)

    Price, Jason Anthony

    to increase profits while reducing operating cost, as well as meeting government and regulatory pressures for processes to be environmentally friendly and sustainable. Current applications of biocatalysts, more specifically, enzymes for large scale bulk production of chemicals have been successfully applied...... to the production of high fructose corn syrup, upgrading of fats and oils and biodiesel production to name a few. Despite these examples of industrial enzymatic applications, it is still not “clear cut” how to implement biocatalyst in industry and how best to optimize the processes. This is because the processing...... strategy is usually different to most traditional catalytic processes. In nature, enzymes operate at much lower substrate and product concentrations compared to most industrial chemical processes. What this means is that the natural conditions for biocatalysts are normally much different from conventional...

  17. Anaerobic digestion of pig manure and glycerol from biodiesel production

    Directory of Open Access Journals (Sweden)

    Pakamas Chetpattananondh, Sumate Chaiprapat, Chaisri Suksaroj

    2015-01-01

    Full Text Available Increasing biodiesel production causes a surplus of glycerol. This work aims to investigate the crude glycerol pretreatment method and then apply the glycerol as a co-substrate with pig manure for anaerobic digestion. The optimum crude glycerol pretreatment method was acidification with 6% of H2SO4 that highest glycerol recovery was obtained with lowest cost. Co-digestions of glycerol and pig manure enhanced biogas and methane productions compared with mono-digestions. Biogas and methane productions in semi-continuous digestions were highly effected by OLR. The optimum OLR was 3.06 kg SCOD/m3 that biogas production was maintained at 3 L/d with methane composition of 72% and SCOD removal higher than 80%.

  18. Governmental tax breaks to biofuels production; Incentivos governamentais na producao do biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Munch, Marcelo Guimaraes; Costa, Fabio Carbalho [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    Given the introduction of biodiesel as an energy source ecologically correct, it will seek to do an analysis on the taxation of biodiesel in Brazil. It should also be assessed to tax biodiesel from the viewpoint of the Principle of Neutrality and the character stimulating function of taxation. Although there is no legal incidence of the CIDE (Contribution in Economic Policy) on biodiesel, the laws relating to taxation of biodiesel refers to the IPI (Tax on Industrialized Products) and social contributions for PIS (Social Integration Program) and Cofins (Contribution to Social Security Financing), while taxes of competence of the Union. When we talk about state taxation, some states have maintained the policy of tax incentives biodiesel but we do not have a policy of tax incentives across the country. (author)

  19. Production of biodiesel from sunflower oil and ethanol by base catalyzed transesterification

    OpenAIRE

    Sales, Alejandro

    2011-01-01

    Biodiesel is an attractive alternative fuel for diesel engines.The feedstock for biodiesel production is usually vegetable oil, pure oil or waste cooking oil, or animal fats The most common way today to produce biodiesel is by transesterification of the oils with an alcohol in the presence of an alkaline catalyst. It is a low temperature and low-pressure reaction. It yields high conversion (96%-98%) with minimal side reactions and short reaction time. It is a direct conversion to biodiesel wi...

  20. Application of red mud as a basic catalyst for biodiesel production

    Institute of Scientific and Technical Information of China (English)

    Qiang Liu; Ruirui Xin; Chengcheng Li; Chunli Xu; Jun Yang

    2013-01-01

    Red mud was investigated in triglyceride transesterification with a view to determine its viability as a basic catalyst for use in biodiesel synthesis.The effect of calcination temperature on the structure and activity of red mud catalysts was investigated.It was found that highly active catalyst was obtained by simply drying red mud at 200℃.Utilization of red mud as a catalyst for biodiesel production not only provides a cost-effective and environmentally friendly way of recycling this solid red mud waste,significantly reducing its environmental effects,but also reduces the price of biodiesel to make biodiesel competitive with petroleum diesel.

  1. Development of heterogeneous base catalysts for biodiesel production.

    Science.gov (United States)

    Kawashima, Ayato; Matsubara, Koh; Honda, Katsuhisa

    2008-06-01

    Investigations were conducted on heterogeneous base catalysts for the transesterification of oil aimed at effective production of biodiesel. Thirteen different kinds of metal oxides containing calcium, barium, magnesium, or lanthanum were prepared as catalysts. Their catalytic activities were tested for transesterification at 60 degrees C with a 6:1 molar ratio of methanol to oil and a reaction time of 10h. The calcium-containing catalysts - CaTiO3, CaMnO3, Ca2Fe2O5, CaZrO3, and CaO-CeO2 - showed high activities and approximately 90% yields of methyl ester. Furthermore, catalytic durability tests were performed by repeating the transesterification reaction several times with the calcium-containing catalysts recovered from the previous reaction mixture. It was found that CaZrO3 and CaO-CeO2 show high durability and have the potential to be used in biodiesel production processes as heterogeneous base catalysts.

  2. Catalytic Hydrodeoxygenation of Fatty Acids for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Аntonina A. Stepacheva

    2016-08-01

    Full Text Available This paper is devoted to the production of second generation biodiesel via catalytic hydrodeoxygenation of fatty acids. Pd/C catalysts with different metal loading were used. The palladium catalysts were characterized using low-temperature nitrogen physisorption and X-ray photoelectron spectroscopy. It was revealed that the most active and selective catalyst was 1%-Pd/C which allowed reaching up 97.5% of selectivity (regarding to n-heptadecane at 100% conversion of substrate. Moreover, the chosen catalyst is more preferable according to lower metal content that leads the decrease of the process cost. The analysis of the catalysts showed that 1%-Pd/C had the highest specific surface area compared with 5%-Pd/C. Copyright © 2016 BCREC GROUP. All rights reserved Received: 31st July 2015; Revised: 9th December 2015; Accepted: 30th December 2015 How to Cite: Stepacheva, A.A., Sapunov, V.N., Sulman, E.M., Nikoshvili, L.Z., Sulman, M.G., Sidorov, A.I., Demidenko, G.N., Matveeva, V.G. (2016. Catalytic Hydrodeoxygenation of Fatty Acids for Biodiesel Production. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2: 125-132 (doi:10.9767/bcrec.11.2.538.125-132 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.11.2.538.125-132

  3. Comparison of Algal Biodiesel Production Pathways Using Life Cycle Assessment Tool

    DEFF Research Database (Denmark)

    Singh, Anoop; Olsen, Stig Irving

    2013-01-01

    The consideration of algal biomass in biodiesel production increased very rapidly in the last decade. A life cycle assessment (LCA) study is presented to compare six different biodiesel production pathways (three different harvesting techniques, i.e., aluminum as flocculent, lime flocculent......, and centrifugation, and two different oil extraction methods, i.e., supercritical CO2 (sCO2) and press and co-solvent extraction). The cultivation of Nannochloropsis sp. considered in a flat-panel photobioreactor (FPPBR). These algal biodiesel production systems were compared with the conventional diesel in a EURO 5...... passenger car used for transport purpose (functional unit 1 person km (pkm). The algal biodiesel production systems provide lesser impact (22–105 %) in comparison with conventional diesel. Impacts of algal biodiesel on climate change were far better than conventional diesel, but impacts on human health...

  4. Biodiesel wash-water reuse using microfiltration: toward zero-discharge strategy for cleaner and economized biodiesel production

    Directory of Open Access Journals (Sweden)

    R. Jaber

    2015-03-01

    Full Text Available A simple but economically feasible refining method to treat and re-use biodiesel wash-water was developed. In detail, microfiltration (MF through depth-filtration configuration was used in different hybrid modules. Then, the treated wash-water was mixed with clean water at different ratios, re-used for biodiesel purification and water-washing efficiency was evaluated based on methyl ester purity analysis. The findings of the present study revealed that depth-filtration-based MF combined with sand filtration/activated carbon separation and 70% dilution rate with fresh water not only achieved standard-quality biodiesel product but also led to up to 15% less water consumption after two rounds of production operations. This would be translated into a considerable reduction in the total volume of fresh water used during the operation process and would also strengthen the environmental-friendly aspects of the biodiesel production process for wastewater generation was obviously cut by the same rate as well.

  5. Alkaline catalyzed biodiesel production from moringa oleifera oil with optimized production parameters

    Energy Technology Data Exchange (ETDEWEB)

    Kafuku, G.; Mbarawa, M. [Department of Mechanical Engineering, Tshwane University of Technology, Private Bag X680, 0001 Pretoria (South Africa)

    2010-08-15

    The utilization of non-edible feedstock such as moringa oleifera for biodiesel production attracts much attention owing to the issue with regards to avoiding a threat to food supplies. In this study, the optimization of biodiesel production parameters for moringa oleifera oil was carried out. The free fatty acid value of moringa oil was found to be 0.6%, rendering the one step alkaline transesterification method for converting moringa fatty acids to their methyl esters possible. The optimum production parameters: catalyst amount, alcohol amount, temperature, agitation speed and reaction time were determined experimentally and found to be: 1.0 wt% catalyst amount, 30 wt% methanol amount, 60 C reaction temperature, 400 rpm agitation rate and 60 min reaction time. With these optimal conditions the conversion efficiency was 82%. The properties of the moringa biodiesel that was produced were observed to fall within the recommended international biodiesel standards. However, moringa biodiesel showed high values of cloud and pour points of 10 C and 3 C respectively, which present a problem as regards use in cold temperatures. (author)

  6. Combinatorial Life Cycle Assessment to Inform Process Design of Industrial Production of Algal Biodiesel

    NARCIS (Netherlands)

    Brentner, L.B.; Eckelman, M.J.; Zimmerman, J.B.

    2011-01-01

    The use of algae as a feedstock for biodiesel production is a rapidly growing industry, in the United States and globally. A life cycle assessment (LCA) is presented that compares various methods, either proposed or under development, for algal biodiesel to inform the most promising pathways for sus

  7. Optimal Design of Algae Biorefinery Processing Networks for the production of Protein, Ethanol and Biodiesel

    DEFF Research Database (Denmark)

    Cheali, Peam; Vivion, Anthony; Gernaey, Krist V.;

    2015-01-01

    analysis such as microalgae production cost, composition of microalgae (e.g. oil content) and biodiesel/bioethanol market prices is considered. New optimal processing paths are found with potential of producing higher amount of biodiesel. Last, the methodology is intended as decision support tool for early...

  8. Scale-up and economic analysis of biodiesel production from municipal primary sewage sludge.

    Science.gov (United States)

    Olkiewicz, Magdalena; Torres, Carmen M; Jiménez, Laureano; Font, Josep; Bengoa, Christophe

    2016-08-01

    Municipal wastewater sludge is a promising lipid feedstock for biodiesel production, but the need to eliminate the high water content before lipid extraction is the main limitation for scaling up. This study evaluates the economic feasibility of biodiesel production directly from liquid primary sludge based on experimental data at laboratory scale. Computational tools were used for the modelling of the process scale-up and the different configurations of lipid extraction to optimise this step, as it is the most expensive. The operational variables with a major influence in the cost were the extraction time and the amount of solvent. The optimised extraction process had a break-even price of biodiesel of 1232 $/t, being economically competitive with the current cost of fossil diesel. The proposed biodiesel production process from waste sludge eliminates the expensive step of sludge drying, lowering the biodiesel price. PMID:27131292

  9. Process intensification of biodiesel production by using microwave and ionic liquids as catalyst

    International Nuclear Information System (INIS)

    The energy crisis pushes the development and intensification of biodiesel production process. Biodiesel is produced by transesterification of vegetable oils or animal fats and conventionally produced by using acid/base catalyst. However, the conventional method requires longer processing time and obtains lower yield of biodiesel. The microwave has been intensively used to accelerate production process and ionic liquids has been introduced as source of catalyst. This paper discusses the overview of the development of biodiesel production through innovation using microwave irradiation and ionic liquids catalyst to increase the yield of biodiesel. The potential microwave to reduce the processing time will be discussed and compared with other energy power, while the ionic liquids as a new generation of catalysts in the chemical industry will be also discussed for its use. The ionic liquids has potential to enhance the economic and environmental aspects because it has a low corrosion effect, can be recycled, and low waste form

  10. Process intensification of biodiesel production by using microwave and ionic liquids as catalyst

    Science.gov (United States)

    Handayani, Prima Astuti; Abdullah, dan Hadiyanto

    2015-12-01

    The energy crisis pushes the development and intensification of biodiesel production process. Biodiesel is produced by transesterification of vegetable oils or animal fats and conventionally produced by using acid/base catalyst. However, the conventional method requires longer processing time and obtains lower yield of biodiesel. The microwave has been intensively used to accelerate production process and ionic liquids has been introduced as source of catalyst. This paper discusses the overview of the development of biodiesel production through innovation using microwave irradiation and ionic liquids catalyst to increase the yield of biodiesel. The potential microwave to reduce the processing time will be discussed and compared with other energy power, while the ionic liquids as a new generation of catalysts in the chemical industry will be also discussed for its use. The ionic liquids has potential to enhance the economic and environmental aspects because it has a low corrosion effect, can be recycled, and low waste form.

  11. Biodiesel production from Jatropha oil catalyzed by immobilized Burkholderia cepacia lipase on modified attapulgite.

    Science.gov (United States)

    You, Qinghong; Yin, Xiulian; Zhao, Yuping; Zhang, Yan

    2013-11-01

    Lipase from Burkholderia cepacia was immobilized on modified attapulgite by cross-linking reaction for biodiesel production with jatropha oil as feedstock. Effects of various factors on biodiesel production were studied by single-factor experiment. Results indicated that the best conditions for biodiesel preparation were: 10 g jatropha oil, 2.4 g methanol (molar ratio of oil to methanol is 1:6.6) being added at 3h intervals, 7 wt% water, 10 wt% immobilized lipase, temperature 35°C, and time 24h. Under these conditions, the maximum biodiesel yield reached 94%. The immobilized lipase retained 95% of its relative activity during the ten repeated batch reactions. The half-life time of the immobilized lipase is 731 h. Kinetics was studied and the Vmax of the immobilized lipases were 6.823 mmol L(-1). This immobilized lipase catalyzed process has potential industrial use for biodiesel production to replace chemical-catalyzed method.

  12. Process intensification of biodiesel production by using microwave and ionic liquids as catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Handayani, Prima Astuti [Department of Chemical Engineering, Diponegoro University (Indonesia); Chemical Engineering Program, Faculty of Engineering, Semarang State University (Indonesia); Abdullah; Hadiyanto, Dan, E-mail: hadiyanto@live.undip.ac.id [Department of Chemical Engineering, Diponegoro University (Indonesia)

    2015-12-29

    The energy crisis pushes the development and intensification of biodiesel production process. Biodiesel is produced by transesterification of vegetable oils or animal fats and conventionally produced by using acid/base catalyst. However, the conventional method requires longer processing time and obtains lower yield of biodiesel. The microwave has been intensively used to accelerate production process and ionic liquids has been introduced as source of catalyst. This paper discusses the overview of the development of biodiesel production through innovation using microwave irradiation and ionic liquids catalyst to increase the yield of biodiesel. The potential microwave to reduce the processing time will be discussed and compared with other energy power, while the ionic liquids as a new generation of catalysts in the chemical industry will be also discussed for its use. The ionic liquids has potential to enhance the economic and environmental aspects because it has a low corrosion effect, can be recycled, and low waste form.

  13. Biodiesel Production from Waste Edible Oils and Grease Containing Free Fatty Acids

    Institute of Scientific and Technical Information of China (English)

    Huang Fenghong; Guo Pingmei; Huang Qingde

    2005-01-01

    Till now, most part of the biodiesel is produced from the refined vegetable oils using methanol as feedstock in the presence of an alkali catalyst. However, large amount of waste edible oils and grease are available. The difficulty with alkali-catalyzed esterification of these oils is that they often contain large amount of free fatty acids (FFA), polymers and decomposition products. These free fatty acids can quickly react with the alkali catalyst to produce soaps that inhibit the separation of the ester and glycerine. An esterification and transesterification process is developed to convert the high FFA oil to its monoesters. The first step, the acidcatalyzed esterification with glycerine and these FFA reduces the FFA content of the oil and grease to less than3%, and then an azeotropic distillation solvent is used to remove the water. The major factors affecting the conversion efficiency of the process such as glycerol to free fatty acid molar ratio, catalyst amount, reaction temperature and reaction duration are analyzed. The second step, alkali-catalyzed transesterification process converts the products of the first step to its monoesters and glycerol, and then the glycerol is recycled for utilization in the first step. Technical indicators of the biodiesel product can meet the ASTM 6751 standard.

  14. Mackerel biodiesel production from the wastewater containing fish oil

    International Nuclear Information System (INIS)

    Marine fish such as mackerel are important for coastal fisheries in Taiwan. Nearly 60,000 tons of mackerel are produced in Suao, I-lan, Taiwan every year. In this study, oil from the discarded parts of mackerel fish contained in wastewater stream were used as the raw material to produce biodiesel through transesterification reaction. The major fuel properties of MB (mackerel biodiesel), including the iodine value, dynamic viscosity, flash point, and heat value, were determined and compared with sunflower seed oil methyl ester (SFM), JCB (Jatropha curcas biodiesel), and premium diesel (D). MB had a higher iodine value, dynamic viscosity, density, and flash point, but a lower heat value, than did D. MB was also used as fuel in a regular diesel engine to verify its emission characteristics. The MB fuel used for exhaust emission test included pure MB (MB100) and a 20% MB blend with premium diesel (MB20). The exhaust emission of MB was also compared with the exhaust emissions of D and JCB. The results showed that MB20 provided a significant reduction in NO, NOx, and SO2 emissions under varied engine loads, and required no engine modification. - Highlights: • Biodiesel was produced from wastewater containing mackerel fish oil. • Mackerel biodiesel is compared with Jatropha biodiesel and sunflower seed biodiesel. • MBE (mackerel biodiesel) was found to contain higher amount of unsaturated fatty acids. • Mackerel biodiesel, diesel, and Jatropha biodiesel emissions are compared

  15. Carbonaceous residues from biomass gasification as catalysts for biodiesel production

    Institute of Scientific and Technical Information of China (English)

    Rafael Luque; Antonio Pineda; Juan C. Colmenares; Juan M. Campelo; Antonio A. Romero; Juan Carlos Serrano-Ruiz; Luisa F. Cabeza; Jaime Cot-Gores

    2012-01-01

    Tars and alkali ashes from biomass gasification processes currently constitute one of the major problems in biomass valorisation,generating clogging of filters and issues related with the purity of syngas production.To date,these waste residues find no useful applications and they are generally disposed upon generation in the gasification process.A detailed analysis of these residues pointed out the presence of high quantities of Ca (>30 wt%).TG experiments indicated that a treatment under air at moderate temperatures (400-800 ℃) decomposed the majority of carbon species,while XRD indicated the presence of a crystalline CaO phase.CaO enriched valorized materials turned out to be good heterogeneous catalysts for biodiesel production from vegetable oils,providing moderate to good activities (50%-70% after 12 h) to fatty acid methyl esters in the transesterification of sunflower oil with methanol.

  16. Production of biodiesel from melia azedarach seed oil: a non- edible feedstock for biodiesel

    International Nuclear Information System (INIS)

    Biodiesel (BD) is a first-generation biofuel that has emerged as a renewable alternative diesel fuel, obtained by the transesterification of vegetable oils and animals fats, using a short-chain alcohol and a catalyst that may be an acid, a base or an enzyme. BD can be used in the existing compression-ignition engines without any further modification. Presently, most of the BD production is being carried out using edible vegetable oil which has put a strain on the food supply and, hence, has led it into a competition with the food industry. It has also resulted in a rise in the prices of such feed stocks. Hence, search for the newer and non-edible feed stocks is becoming increasingly important. The objective of the present work is to explore the utility of Melia azedarach seed oil, a non-edible feedstock, for the preparation of BD. The oil was extracted by using n-hexane as a solvent and a oil content of 32% was obtained. As a result of transesterification using sodium hydroxide and methanol, 80% conversion of the oil into BD was obtained. Fatty acid profile of the oil and the BD were found to be almost the same. Different fuel properties of the BD prepared were studied including viscosity, iodine number, acid number, cold point and cetane number, and the values obtained are 4.7, 112, 0.45 mg KOH/g, < -10 deg. C and 45, respectively. Although the oxidation stability is less than the required standard value by EN 14214, but it can be enhanced by introducing some additives into the final product. Other properties were found to be in agreement with the required specifications for BD by EN 14214, hence Melia azedarach seed oil is a suitable non-edible feedstock for the production of BD. (author)

  17. Designing a Biodiesel Fuel with Optimized Fatty Acid Composition

    Science.gov (United States)

    Biodiesel is an alternative to petroleum-derived diesel fuel, although it can replace only a few percent of current petrodiesel production. It is technically competitive with petrodiesel. Technical problems with biodiesel are oxidative stability, cold flow increased nitrogen oxides (NOx) exhaust em...

  18. Harvesting and processing of microalgae biomass fractions for biodiesel production

    International Nuclear Information System (INIS)

    There has been a recent resurgent interest in microalgae as an oil producer for biofuel applications. An adequate supply of nutrients and carbon dioxide enables algae to successfully transform light energy of the sun into energy - rich chemical compounds through photosynthesis. A strain with high lipids, successfully grown and harvested, could provide oil for most of our process by volume, which would then provide the most profitable output. Significant advances have also been made in upstream processing to generate cellular biomass and oil. However, the process of extracting and purifying of oil from algae continues to prove a significant challenge in producing both microalgae bioproducts and biofuel, as the oil extraction from algae is relatively energy-intensive and expensive. The aim of this review is to focus on different harvesting and extraction processes of algae for biodiesel production reported within the last decade. (author)

  19. Solid acid catalyzed biodiesel production from waste cooking oil

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, Kathlene; Gopinath, Rajesh; Meher, Lekha Charan; Dalai, Ajay Kumar [Catalysis and Chemical Reaction Engineering Laboratories, Department of Chemical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK, S7N 5A9 (Canada)

    2008-12-17

    Various solid acid catalysts were evaluated for the production of biodiesel from low quality oil such as waste cooking oil (WCO) containing 15 wt.% free fatty acids. The zinc stearate immobilized on silica gel (ZS/Si) was the most effective catalyst in simultaneously catalyzing the transesterification of triglycerides and esterification of free fatty acid (FFA) present in WCO to methyl esters. The optimization of reaction parameters with the most active ZS/Si catalyst showed that at 200 C, 1:18 oil to alcohol molar ratio and 3 wt.% catalysts loading, a maximum ester yield of 98 wt.% could be obtained. The catalysts were recycled and reused many times without any loss in activity. (author)

  20. Towards continuous enzyme-catalysed processes for the production of biodiesel

    DEFF Research Database (Denmark)

    Nordblad, Mathias; Pedersen, Anders Kristian; Meyland, Lene Have;

    The application of lipases in the production of biodiesel can find several roles: in pretreating high FFA oils via esterification, transesterification for converting oil to biodiesel and polishing via esterification to ensure the product is within specification. In all these cases the potential...... size of the process plants, suggest that continuous operation would be highly beneficial due to the economies of scale. To investigate this, we have examined both oil pretreatment via esterification and biodiesel production via transesterification in batch stirred tank reactors (BSTRs), continuous...

  1. Optimal processing pathway for the production of biodiesel from microalgal biomass: A superstructure based approach

    DEFF Research Database (Denmark)

    Rizwan, Muhammad; Lee, Jay H.; Gani, Rafiqul

    2013-01-01

    In this study, we propose a mixed integer nonlinear programming (MINLP) model for superstructure based optimization of biodiesel production from microalgal biomass. The proposed superstructure includes a number of major processing steps for the production of biodiesel from microalgal biomass...... for the production of biodiesel from microalgae. The proposed methodology is tested by implementing on a specific case with different choices of objective functions. The MINLP model is implemented and solved in GAMS using a database built in Excel. The results from the optimization are analyzed...

  2. Advanced Chemical Reactor Technologies for Biodiesel Production from Vegetable Oils - A Review

    Directory of Open Access Journals (Sweden)

    Luqman Buchori

    2016-10-01

    Full Text Available Biodiesel is an alternative biofuel that can replace diesel oil without requiring modifications to the engine and advantageously produces cleaner emissions. Biodiesel can be produced through transesterification process between oil or fat and alcohol to form esters and glycerol. The transesterification can be carried out with or without a catalyst. The catalyzed production of biodiesel can be performed by using homogeneous, heterogeneous and enzyme. Meanwhile, non-catalytic transesterification with supercritical alcohol provides a new way of producing biodiesel. Microwave and ultrasound assisted transesterification significantly can reduce reaction time as well as improve product yields. Another process, a plasma technology is promising for biodiesel synthesis from vegetable oils due to very short reaction time, no soap formation and no glycerol as a by-product. This paper reviews briefly the technologies on transesterification reaction for biodiesel production using homogeneous, heterogeneous, and enzyme catalysts, as well as advanced methods (supercritical, microwave, ultrasonic, and plasma technology. Advantages and disadvantages of each method were described comprehensively. Copyright © 2016 BCREC GROUP. All rights reserved Received: 17th May 2016; Revised: 20th September 2016; Accepted: 20th September 2016 How to Cite: Buchori, L., Istadi, I., Purwanto, P. (2016. Advanced Chemical Reactor Technologies for Biodiesel Production from Vegetable Oils - A Review. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (3: 406-430 (doi:10.9767/bcrec.11.3.490.406-430 Permalink/DOI: http://doi.org/10.9767/bcrec.11.3.490.406-430

  3. Safety of Animal Fats for Biodiesel Production: A Critical Review of Literature

    Energy Technology Data Exchange (ETDEWEB)

    Greene, A.; Dawson, P.; Nixon, D.; Atkins, J.; Pearl, G. [Clemson University, SC (United States)

    2007-05-15

    An in-depth review of available literature was conducted on the safety of using animal fats for biodiesel. The review indicated little or no known risk to human and animal health and to the environment relative to inherent microbial, organic or inorganic agents in animal fats destined for biodiesel production. Animal by-products are generated from the inedible tissues derived from meat, poultry and fish production. This material is thermally processed by the rendering industry to generate a number of industrial materials including use of the fat portion to produce biodiesel. As the biodiesel industry continues to develop, questions have emerged about the safety of animal versus vegetable fats for biodiesel production and utilization. The following report is the result of a detailed literature search into the potential microbial, organic, and inorganic contaminants that may be present in animal fats and the potential for human or environmental safety issues associated with each. The potential safety risks associated with prions are discussed in a separate report, 'Biodiesel from Specified Risk Material Tallow: An Appraisal of TSE Risks and their Reduction'. In certain instances, very little was reported about the potential contaminating moiety and its fate in biodiesel production and usage. Establishing an absolute zero risk assessment is impossible on any fat utilized for biodiesel production. Among the potential microbial contaminants, bacteria, viruses, fungi, yeast, parasites, and microbial toxins were considered. In each instance, the nature of the production process and usage of biodiesel via combustion reduce the possibility that microbial contaminants would be a cause for concern to humans, animals, or the environment. Potential organic moieties contaminating the fat should meet a similar fate. Current evidence suggests that metals and metalloids within animal fats will not cause significant safety issues in the production and use of rendered fat

  4. Biotechnological processes for biodiesel production using alternative oils.

    Science.gov (United States)

    Azócar, Laura; Ciudad, Gustavo; Heipieper, Hermann J; Navia, Rodrigo

    2010-10-01

    As biodiesel (fatty acid methyl ester (FAME)) is mainly produced from edible vegetable oils, crop soils are used for its production, increasing deforestation and producing a fuel more expensive than diesel. The use of waste lipids such as waste frying oils, waste fats, and soapstock has been proposed as low-cost alternative feedstocks. Non-edible oils such as jatropha, pongamia, and rubber seed oil are also economically attractive. In addition, microalgae, bacteria, yeast, and fungi with 20% or higher lipid content are oleaginous microorganisms known as single cell oil and have been proposed as feedstocks for FAME production. Alternative feedstocks are characterized by their elevated acid value due to the high level of free fatty acid (FFA) content, causing undesirable saponification reactions when an alkaline catalyst is used in the transesterification reaction. The production of soap consumes the conventional catalyst, diminishing FAME production yield and simultaneously preventing the effective separation of the produced FAME from the glycerin phase. These problems could be solved using biological catalysts, such as lipases or whole-cell catalysts, avoiding soap production as the FFAs are esterified to FAME. In addition, by-product glycerol can be easily recovered, and the purification of FAME is simplified using biological catalysts.

  5. Biotechnological processes for biodiesel production using alternative oils

    Energy Technology Data Exchange (ETDEWEB)

    Azocar, Laura; Ciudad, Gustavo [La Frontera Univ., Temuco (Chile). Nucleo Cietifico Tecnologico en Biorrecursos; Heipieper, Hermann J. [Helmholtz Centre for Environmental Research-UFZ, Leipzig (Germany). Dept. of Environmental Biotechnology; Navia, Rodrigo [La Frontera Univ., Temuco (Chile). Nucleo Cietifico Tecnologico en Biorrecursos; La Frontera Univ., Temuco (Chile). Dept. de Ingenieria Quimica

    2010-10-15

    As biodiesel (fatty acid methyl ester (FAME)) is mainly produced from edible vegetable oils, crop soils are used for its production, increasing deforestation and producing a fuel more expensive than diesel. The use of waste lipids such as waste frying oils, waste fats, and soapstock has been proposed as low-cost alternative feedstocks. Non-edible oils such as jatropha, pongamia, and rubber seed oil are also economically attractive. In addition, microalgae, bacteria, yeast, and fungi with 20% or higher lipid content are oleaginous microorganisms known as single cell oil and have been proposed as feedstocks for FAME production. Alternative feedstocks are characterized by their elevated acid value due to the high level of free fatty acid (FFA) content, causing undesirable saponification reactions when an alkaline catalyst is used in the transesterification reaction. The production of soap consumes the conventional catalyst, diminishing FAME production yield and simultaneously preventing the effective separation of the produced FAME from the glycerin phase. These problems could be solved using biological catalysts, such as lipases or whole-cell catalysts, avoiding soap production as the FFAs are esterified to FAME. In addition, by-product glycerol can be easily recovered, and the purification of FAME is simplified using biological catalysts. (orig.)

  6. One-step production of biodiesel from oils with high acid value by activated Mg-Al hydrotalcite nanoparticles.

    Science.gov (United States)

    Wang, Yi-Tong; Fang, Zhen; Zhang, Fan; Xue, Bao-Jin

    2015-10-01

    Activated Mg-Al hydrotalcite (HT-Ca) nanoparticles (biodiesel yield was obtained at AV of 6.3 mg KOH/g with 4 cycles (biodiesel yield>86%). It was further found that it can resist free fatty acids, and biodiesel yield reached 92.9% from soybean oil with high AV of 12.1. HT-Ca catalyst showed a potential practical application for direct production of biodiesel from oils with high AV without pretreatment.

  7. Biodiesel development: New markets for conventional and genetically modified agricultural products

    Energy Technology Data Exchange (ETDEWEB)

    Duffield, J.; Shapouri, H.; Graboski, M.; McCormick, R.; Wilson, R.

    1998-09-01

    With environmental and energy source concerns on the rise, using agricultural fats and oils as fuel in diesel engines has captured increasing attention. Substituting petroleum diesel with biodiesel may reduce air emissions, increase the domestic supply of fuel, and create new markets for farmers. US agricultural fats and oils could support a large amount of biodiesel, but high production costs and competing uses of biodiesel feedstocks will likely prevent mass adoption of biodiesel fuel. Higher-priced niche markets could develop for biodiesels as a result of environmental regulations. Biodiesel has many environmental advantages relative to petroleum diesel, such as lower CO, CO{sub 2}, SO{sub x}, and particulate matter emissions. Enhancing fuel properties by genetically modifying oil crops could improve NO{sub x} emissions, cold flow, and oxidative stability, which have been identified as potential problems for biodiesel. Research activities need to be directed toward cost reduction, improving fuel properties, and analyzing the economic effects of biodiesel development on US agriculture.

  8. COMPARISON OF BIODIESEL PRODUCTIVITIES OF DIFFERENT VEGETABLE OILS BY ACIDIC CATALYSIS

    Directory of Open Access Journals (Sweden)

    AYTEN SAGIROGLU

    2011-03-01

    Full Text Available Biodiesel has become a subject which increasingly attracts worldwide attention because of its environmental benefits, biodegradability and renewability. Biodiesel production typically involves the transesterification of a triglyceride feedstock with methanol or other short-chain alcohols. This paper presents a study of transesterification of various vegetable oils, sunflower, safflower, canola, soybean, olive, corn, hazelnut and waste sunflower oils, with the acidic catalyst. Under laboratory conditions, fatty acid methyl esters (FAME were prepared by using methanol in the presence of 1.85% hydrochloric acid at 100 °C for 1 h and 25 °C for 3 h. The analyses of biodiesel were carried out by gas chroma¬tography and thin layer chromatography. Also, biodiesel productivities (% were determined on basis of the ratio of ester to oil content (w/w. The biodiesel productivities for all oils were found to be about 80% and about 90% at 25 and 100 °C, respectively. Also, the results showed that the yield of biodiesel depended on temperature for some oils, including canola, sunflower, safflower oils, but it was not found significant differences among all of the oil types on biodiesel productivities.

  9. Microalgal Biodiesel Production through a Novel Attached Culture System and Conversion Parameters

    OpenAIRE

    Johnson, Michael Ben

    2009-01-01

    Due to a number of factors, the biodiesel industry in the United States is surging in growth. Traditionally, oil seed crops such as soybean are used as the feedstock to create biodiesel. However, the crop production can no longer safely keep up with the demand for the growing biodiesel industry. Using algae as a feedstock has been considered for a number of years, but it has always had limitations. These limitations were mainly due to the production methods used to grow and harvest the...

  10. Industrial Fermentation of Auxenochlorella protothecoides for Production of Biodiesel and Its Application in Vehicle Diesel Engines

    OpenAIRE

    Xiao, Yibo; Lu, Yue; Dai, Junbiao; Wu, Qingyu

    2015-01-01

    Microalgae-derived biodiesel has been regarded as a promising alternative for fossil diesel. However, the commercial production of microalgal biodiesel was halted due to its high cost. Here, we presented a pilot study on the industrial production of algal biodiesel. We began with the heterotrophic cultivation of Auxenochlorella protothecoides in a 60-m3 fermentor that produced biomass at 3.81 g L−1 day−1 with a neutral lipid content at 51%. Next, we developed plate-frame filter, natural dryin...

  11. Industrial fermentation of Auxenochlorella protothecoides for production of biodiesel and its application in vehicle diesel engines

    OpenAIRE

    Yibo eXiao; Yue eLu; Junbiao eDai; Qingyu eWu

    2015-01-01

    Microalgae-derived biodiesel has been regarded as a promising alternative for fossil diesel. However, the commercial production of microalgal biodiesel was halted due to its high cost. Here, we presented a pilot study on the industrial production of algal biodiesel. We began with the heterotrophic cultivation of Auxenochlorella protothecoides in a 60 m3 fermentor that produced biomass at 3.81 g L-1 day-1 with a neutral lipid content at 51%. Next, we developed plate-frame filter, natural dryin...

  12. Residual animal fat and fish for biodiesel production. Potentials in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, Otto; Weinbach, Jan-Erik [Western Norway Research Institute (WNRI), P. Box 163, 6851 Sogndal (Norway)

    2010-08-15

    The potential for biodiesel production based on utilization of residual animal fat and fish in Norway is estimated. This is based on a study of the amounts of residual fat that is possible to recover from grease traps in Bergen. Additional data from Trondheim and Oslo facilitated up-scaling to estimating national potential for utilizing this residue stream for biodiesel production. This is supplemented with data on residues from slaughterhouses and poultry, as well as the fishing industry. The results indicate that Norway has the potential for producing large amounts of biodiesel from these residue sources. (author)

  13. Microtox Aquatic Toxcity of Petrodiesel and Biodiesel Blends: The Role of Biodiesel's Autoxidation Products

    Science.gov (United States)

    The acute Microtox toxicity of the water accommodated fraction (WAF) of six commercial soybean biodiesel/petrodiesel blends was investigated at different oil loads. We analyzed five fatty acid methyl esters (FAMEs), C10 - C24 n-alkanes, four aromatics, methanol, and tota...

  14. Production and characterization of biodiesel obtained from Sapindus mukorossi kernel oil

    International Nuclear Information System (INIS)

    Sapindus mukorossi is a tree available in northeastern region of India. Fruit of S. mukorossi has some traditional usage and its kernel contains 39% (w/w) oil. Prospect of S. mukorossi oil for biodiesel production is investigated with reference to some relevant properties. The fatty acid profile of oil extracted from S. mukorossi is found comparable with similar seed oils attempted for biodiesel production in this region. Since the acid value of S. mukorossi is found to be 15.6 mgKOH/g, so biodiesel is prepared using two stage transesterification. In the first step, alcohol to oil molar ratio of 6:1 with 1 wt% of H2SO4, results the maximum reduction in acid value (acid value 1.89 mgKOH/g) within 60 min. In the second step, 10:1 alcohol to oil molar ratio and 1wt% NaOCH3 gives the optimum yield of biodiesel. Finally, the biodiesel is confirmed by the peaks appeared in 1H NMR and 13C NMR. The properties of the biodiesel are obtained using standard ASTM techniques and found to conform to the existing norms. - Highlights: • Produced biodiesel from high acid value Sapindus mukorossi oil using two step transesterification. • The product formation is confirmed using NMR spectroscopy. • Properties are obtained using standard ASTM techniques and most of these are found to conform to the existing norms

  15. Biodiesel production via injection of superheated methanol technology at atmospheric pressure

    International Nuclear Information System (INIS)

    Highlights: • Non-catalytic superheated methanol for biodiesel production is developed. • Crude Jatropha curcas oil with high FFA can be directly used as oil feedstock. • High content of biodiesel can be produced. • Separation of FAME and glycerol from the sample product is easy. - Abstract: In this high demand of renewable energy market, biodiesel was extensively produced via various catalytic and non-catalytic technologies. Conventional catalytic transesterification for biodiesel production has been shown to have limitation in terms of sensitivity to high water and free fatty acid, complicated separation and purification of biodiesel. In this study, an alternative and innovative approach was carried out via non-catalytic superheated methanol technology to produce biodiesel. Similar to supercritical reaction, the solvent need to be heated beyond the critical temperature but the reactor pressure remained at 0.1 MPa (atmospheric pressure). Transesterification reaction with superheated methanol was carried out at different reaction temperature within the limit of 270–300 °C and at different methanol flow rate ranging from 1 ml/min to 3 ml/min for 4 h. Results obtained showed that the highest biodiesel yield at 71.54% w/w was achieved at reaction temperature 290 °C and methanol flow rate at 2 ml/min with 88.81% w/w FAME content, implying the huge potential of superheated technology in producing FAME

  16. Biodiesel Production by Enzymatic Transesterification of Papaya Seed Oil and Rambutan Seed Oil

    Directory of Open Access Journals (Sweden)

    C. S. Wong

    2014-12-01

    Full Text Available Biodiesel production from vegetable oil has gained attention as an alternative fuel to minimize the usage of fossil fuels and reduce greenhouse gases pollution. In Malaysia, oils from local fruit seeds of papaya and rambutan are potential feedstock for biodiesel production due to their high lipid contents and easily available. In the present study, papaya and rambutan seed oils were extracted via soxhlet apparatus using n-hexane and the oil yields were in between 34–40%. The extracted oils were subjected to enzymatic transesterification by the immobilized Candida rugosa lipase as a catalyst under room temperature with varies molar ratios of methanol to oil. The highest biodiesel yield for papaya seed oil and rambutan seed oil was found to be 96% and 89% at methanol-to-oil ratios of 6:1 and 8:1, respectively. Results also showed a higher biodiesel yield using lipase immobilized on the magnetic particles as the heterogeneous catalyst compared to the yield obtained using free enzyme as the homogeneous catalyst. The properties of biodiesel such as density, acid value, iodine value and cetane number were analyzed and found to meet the European Standard of Biodiesel. The study shows that papaya and rambutan seed oils have the potential to be used as alternative feedstock for biodiesel production than the full dependence on palm oil in Malaysia.

  17. Effects of pre-treatments on the lipid extraction and biodiesel production from municipal WWTP sludge

    OpenAIRE

    Olkiewicz, Magdalena; Fortuny Sanromá, Agustín; Stüber, Frank Erich; Fabregat Llagostera, Azael; Font Capafons, Josep; Bengoa, Christophe José

    2015-01-01

    Biodiesel production is currently limited due to high raw material costs. The potential of using sludge from municipal wastewater treatment plants as an alternative lipid feedstock was investigated. Four different types of sludge (primary, secondary, blended and stabilised) were tested in lipid extraction by Soxhlet using hexane, and biodiesel production by acid catalysis. To improve the extraction efficiency, the influence of pre-treatment methods (ultrasonic and mechanical disintegration) a...

  18. Biodiesel Production by Enzymatic Transesterification of Papaya Seed Oil and Rambutan Seed Oil

    OpenAIRE

    Wong, C. S.; R. Othman

    2014-01-01

    Biodiesel production from vegetable oil has gained attention as an alternative fuel to minimize the usage of fossil fuels and reduce greenhouse gases pollution. In Malaysia, oils from local fruit seeds of papaya and rambutan are potential feedstock for biodiesel production due to their high lipid contents and easily available. In the present study, papaya and rambutan seed oils were extracted via soxhlet apparatus using n-hexane and the oil yields were in between 34–40%. The extracted oils we...

  19. Production and Testing of Coconut Oil Biodiesel Fuel and its Blend

    OpenAIRE

    Oguntola J. ALAMU; Opeoluwa DEHINBO; Adedoyin M SULAIMAN

    2010-01-01

    Many researchers have successfully worked on generating energy from different alternative sources including solar and biological sources such as the conversion of trapped energy from sunlight to electricity and conversion of some renewable agricultural products to fuel. This work considers the use of coconut oil for the production of alternative renewable and environmental friendly biodiesel fuel as an alternative to conventional diesel fuel. Test quantities of coconut oil biodiesel were prod...

  20. Production and characterization of biodiesel from Camelus dromedarius (Hachi) fat

    International Nuclear Information System (INIS)

    Highlights: • Transesterification reaction with methanol in the presence of NaOH as a catalyst. • Optimization of key reaction parameters were performed. • Some fuel properties of biodiesel were measured and compared with biodiesel standards. • Ten of the properties that were evaluated for the diesel conform to the ASTM and EN standards values. - Abstract: Recently, biodiesel has been gaining market share against fossil-origin diesel due to its ecological benefits and because it can be directly substituted for traditional diesel oils. However, the high cost of the raw materials required to produce biodiesel make it more expensive than fossil diesel. Therefore, low-priced raw materials, such as waste cooking oil and animal fats, are of interest because they can be used to drive down the cost of biodiesel. We have produced biodiesel from camel fat using a transesterification reaction with methanol in the presence of NaOH. The experimental variables investigated in this study were the temperature (30–75 °C), reaction time (20–160 min), catalyst concentration (0.25–1.5%), and methanol/fat molar ratio (4:1–9:1). A maximum biodiesel yield of 98.6% was obtained. The fuel properties of biodiesel, such as iodine value, saponification value, density, kinematic viscosity, cetane number, flash point, sulfur content, carbon residue, water and sediment, high heating value, refractive index, cloud point, pour point, and distillation characteristics, were measured. The properties were compared with EN 14214 and ASTM 6751 biodiesel standards, and an acceptable level of agreement was obtained

  1. Influence of transesterification reaction temperature on biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Pighinelli, Anna Leticia Montenegro Turtelli; Zorzeto, Thais Queiroz; Park, Kil Jin [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], E-mail: annalets@agr.unicamp.br; Bevilaqua, Gabriela [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Quimica

    2008-07-01

    Brazilian government policy has authorized the introduction of biodiesel into the national energy matrix, law no.11.097 of January 13th, 2005. It is necessary, like any new product, to invest in research which is able to cover its entire production chain (planting of oilseeds, vegetable oils extraction and chemical reactions), providing data and relevant information in order to optimize the process and solve critical issues. The objective of this work was to study the effects of temperature on crude sunflower transesterification reaction with ethanol. A central composite experimental design with five variation levels (25 deg, 32 deg, 47.5 deg, 64 deg and 70 deg C) was used and response surface methodology applied for the data analysis. The statistical analysis of the results showed that the production suffered the influence of temperature (linear and quadratic effects) and reaction time (linear and quadratic). The generated models did not show significant regression. The model generated was not well suited to the experimental data and the value of the coefficient of determination (R{sup 2}=0.52) was low. Consequently it was not possible to build the response surface. (author)

  2. Green biodiesel production: a review on feedstock, catalyst, monolithic reactor, and supercritical fluid technology

    Directory of Open Access Journals (Sweden)

    Rizo Edwin Gumba

    2016-09-01

    Full Text Available The advancement of alternative energy is primarily catalyzed by the negative environmental impacts and energy depletion caused by the excessive usage of fossil fuels. Biodiesel has emerged as a promising substitute to petrodiesel because it is biodegradable, less toxic, and reduces greenhouse gas emission. Apart from that, biodiesel can be used as blending component or direct replacements for diesel fuel in automotive engines. A diverse range of methods have been reported for the conversion of renewable feedstocks (vegetable oil or animal fat into biodiesel with transesterification being the most preferred method. Nevertheless, the cost of producing biodiesel is higher compared to fossil fuel, thus impeding its commercialization potentials. The limited source of reliable feedstock and the underdeveloped biodiesel production route have prevented the full-scale commercialization of biodiesel in many parts of the world. In a recent development, a new technology that incorporates monoliths as support matrices for enzyme immobilization in supercritical carbon dioxide (SC-CO2 for continuous biodiesel production has been proposed to solve the problem. The potential of SC-CO2 system to be applied in enzymatic reactors is not well documented and hence the purpose of this review is to highlight the previous studies conducted as well as the future direction of this technology.

  3. Prospects of Biodiesel Production from Macadamia Oil as an Alternative Fuel for Diesel Engines

    Directory of Open Access Journals (Sweden)

    Md Mofijur Rahman

    2016-05-01

    Full Text Available This paper investigated the prospects of biodiesel production from macadamia oil as an alternative fuel for diesel engine. The biodiesel was produced using conventional transesterification process using the base catalyst (KOH. A multi-cylinder diesel engine was used to evaluate the performance and emission of 5% (B5 and 20% (B20 macadamia biodiesel fuel at different engine speeds and full load condition. It was found that the characteristics of biodiesel are within the limit of specified standards American Society for Testing and Materials (ASTM D6751 and comparable to diesel fuel. This study also found that the blending of macadamia biodiesel–diesel fuel significantly improves the fuel properties including viscosity, density (D, heating value and oxidation stability (OS. Engine performance results indicated that macadamia biodiesel fuel sample reduces brake power (BP and increases brake-specific fuel consumption (BSFC while emission results indicated that it reduces the average carbon monoxide (CO, hydrocarbons (HC and particulate matter (PM emissions except nitrogen oxides (NOx than diesel fuel. Finally, it can be concluded that macadamia oil can be a possible source for biodiesel production and up to 20% macadamia biodiesel can be used as a fuel in diesel engines without modifications.

  4. Optimisation of biodiesel production by sunflower oil transesterification.

    Science.gov (United States)

    Antolín, G; Tinaut, F V; Briceño, Y; Castaño, V; Pérez, C; Ramírez, A I

    2002-06-01

    In this work the transformation process of sunflower oil in order to obtain biodiesel by means of transesterification was studied. Taguchi's methodology was chosen for the optimisation of the most important variables (temperature conditions, reactants proportion and methods of purification), with the purpose of obtaining a high quality biodiesel that fulfils the European pre-legislation with the maximum process yield. Finally, sunflower methyl esters were characterised to test their properties as fuels in diesel engines, such as viscosity, flash point, cold filter plugging point and acid value. Results showed that biodiesel obtained under the optimum conditions is an excellent substitute for fossil fuels.

  5. Potential alternatives to edible oils for biodiesel production - A review of current work

    International Nuclear Information System (INIS)

    Biodiesel production is a very modern and technological area for researchers due to the relevance that it is winning everyday because of the increase in the petroleum price and the environmental advantages. Currently, biodiesel is mainly prepared from conventionally grown edible oils such as rapeseed, soybean, sunflower and palm thus leading to alleviate food versus fuel issue. About 7% of global vegetable oil supplies were used for biodiesel production in 2007. Extensive use of edible oils may cause other significant problems such as starvation in developing countries. The use of non-edible plant oils when compared with edible oils is very significant in developing countries because of the tremendous demand for edible oils as food, and they are far too expensive to be used as fuel at present. The production of biodiesel from different non-edible oilseed crops has been extensively investigated over the last few years. (author)

  6. Biodiesel production process from microalgae oil by waste heat recovery and process integration.

    Science.gov (United States)

    Song, Chunfeng; Chen, Guanyi; Ji, Na; Liu, Qingling; Kansha, Yasuki; Tsutsumi, Atsushi

    2015-10-01

    In this work, the optimization of microalgae oil (MO) based biodiesel production process is carried out by waste heat recovery and process integration. The exergy analysis of each heat exchanger presented an efficient heat coupling between hot and cold streams, thus minimizing the total exergy destruction. Simulation results showed that the unit production cost of optimized process is 0.592$/L biodiesel, and approximately 0.172$/L biodiesel can be avoided by heat integration. Although the capital cost of the optimized biodiesel production process increased 32.5% and 23.5% compared to the reference cases, the operational cost can be reduced by approximately 22.5% and 41.6%.

  7. Comparison of energy production with diesel and biodiesel analyzing all costs involved; Comparacao da producao de energia com diesel e biodiesel analisando todos os custos envolvidos

    Energy Technology Data Exchange (ETDEWEB)

    Udaeta, Miguel Edgar Morales; Baitelo, Ricardo Lacerda; Burani, Geraldo Francisco; Grimoni, Jose Aquiles Baesso [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Engenharia de Energia e Automacao Eletricas. Grupo de Energia], e-mail: udaeta@pea.usp.br

    2004-07-01

    This paper presents the result of a study comparing two energy resources: diesel and bio-diesel. For the comparative analysis, the full cost accounting is used, a tool that encompasses all the factors involved in a specific project, including not only technical or economical aspects, but also environmental and social aspects. According to the results, it is pointed that both fuels are comparable, since both of them obtained similar scores. However, diesel fuel has more technical and economical advantages, whereas biodiesel proves to be superior in terms of social and environmental areas. (author)

  8. Biodiesel From Alternative Oilseed Feedstocks: Production and Properties

    Science.gov (United States)

    Fatty acid methyl esters were prepared and evaluated as potential biodiesel fuels from several alternative oilseed feedstocks, which included camelina (Camelina sativa L.), coriander (Coriandrum sativum L.), field mustard (Brassica juncea L.), field pennycress (Thlaspi arvense L.), and meadowfoam (L...

  9. Polymeric efficiency in remove impurities during cottonseed biodiesel production

    Science.gov (United States)

    Lin, H. L.; Liang, Y. H.; Yan, J.; Lin, H. D.; Espinosa, A. R.

    2016-07-01

    This paper describes a new process for developing biodiesel by polymer from crude cottonseed oil. The study was conducted to examine the effectiveness of the alkali transesterification-flocculation-sedimentation process on fast glycerol and other impurities in the separation from biodiesel by using quaternary polyamine-based cationic polymers SL2700 and polyacylamide cationic polymer SAL1100. The settling velocity of glycerol and other impurities in biodiesel was investigated through settling test experiments; the quality of the biodiesel was investigated by evaluating the viscosity and density. The results revealed that SL2700, SAL1100 and their combination dramatically improved the settling velocity of glycerol and other impurities materials than traditional method. SL 2700 with molecular weight of 0.2 million Da and charge density of 50% then plus SAL1100 with molecular weight of 11 million Da and charge density of 10% induced observable particle aggregation with the best settling performance.

  10. The National program of the production and use of biodiesel and strategic environmental assessment; O Programa nacional de producao e uso de biodiesel e a avaliacao ambiental estrategica

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Victor Rafael Fernandes [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2010-07-01

    This work analyzes the use of biodiesel in Brazil under the applied perspective of this renewable fuel in the environmental assessment in the productive chain. It inwards the appearance of biodiesel, its evolution in Brazil and in the world, the structured regulatory framework, beyond these points this work also gives a main focus on the advent of National Program of Production and Usage of Biodiesel (NPPUB - originally PNPUB) and on the defined productive arrangement. It scrutinizes the Environmental Impact Assessment (EIA) and the Strategic Environmental Assessment (SEA), and delimits the pivotal hindrances to the development of biodiesel production sector, claiming to point out all the possible and viable scenarios, profiting the economic development of this activity in harmony with the urgent need to implement Environmentally Safe projects. (author)

  11. Waste Cooking Oil as an Alternate Feedstock for Biodiesel Production

    OpenAIRE

    M. Rafiqul Islam; K. Chris Watts; Chhetri, Arjun B.

    2008-01-01

    As crude oil price reach a new high, the need for developing alternate fuels has become acute. Alternate fuels should be economically attractive in order to compete with currently used fossil fuels. In this work, biodiesel (ethyl ester) was prepared from waste cooking oil collected from a local restaurant in Halifax, Nova Scotia, Canada. Ethyl alcohol with sodium hydroxide as a catalyst was used for the transesterification process. The fatty acid composition of the final biodiesel esters was ...

  12. Biodiesel Production from Microalgae by Extraction – Transesterification Method

    OpenAIRE

    Nguyen Thi Phuong Thao; Nguyen Thanh Tin; Bui Xuan Thanh

    2013-01-01

    The environmental impact of using petroleum fuels has led to a quest to find a suitable alternative fuel source. In this study, microalgae were explored as a highly potential feedstock to produce biodiesel fuel. Firstly, algal oil is extracted from algal biomass by using organic solvents (n–hexan).  Lipid is contained in microalgae up to 60% of their weight. Then, Biodiesel is created through a chemical reaction known as transesterification between algal oil and alcohol (methanol) with ...

  13. Physico-chemical screening of accessions of Jatropha curcas for biodiesel production

    International Nuclear Information System (INIS)

    Biodiesel is an alternative environmentally friendly fuel made from renewable biological sources such as vegetable oils and animal fats. The present report deals with screening of 14 accessions of Jatropha curcas collected from all over India to find the most suitable ones for production of Biodiesel. From the 14 accessions of J. curcas located in the plantation at Osmania University, 4 accessions were initially selected on the basis of traits like general appearance, pest resistance, seed yield and seed-oil content. Further, the seed-oil of these 4 accessions was characterized by physico-chemical analysis to identify the elite accessions for production of biodiesel. Highest 1000-seed weight (640 g) and highest percentage seed-oil content (50.16) (extracted by Soxhlet method with hexane as the solvent) was recorded in the “KM” accession. The transesterification process is affected by the presence of high free fatty acids (recorded in “MB” accession) and high moisture content (recorded in “KM” accession) of the seed-oil which also interfere with the separation of fatty esters and glycerol during production of Biodiesel. Further, high phosphorus content and iodine number (recorded in “MB” accession) interfere with conversion of seed-oil to Biodiesel. In the above context, in spite of its yield being lower, the seed-oil of the “RSAD” accession was found to be most suitable for Biodiesel production followed by “KM”, “F.W.B” and “MB” accessions, since it contains lower free fatty acids, acid value, viscosity, diglycerides and iodine number. -- Highlights: ► We analyzed Indian Jatropha accessions for yield and quality. ► Elite accessions were selected for physico-chemical analysis of seed-oil. ► Four elite accessions identified as good candidates for Biodiesel production. ► The “RSAD” accession was found to be the best suited for biodiesel.

  14. Rhazya stricta Decne seed oil as an alternative, non-conventional feedstock for biodiesel production

    International Nuclear Information System (INIS)

    Highlights: • First report of Rhazia stricta seed oil as feedstock for biodiesel production. • Biodiesel is prepared by alkaline transesterification. • Biodiesel from R. stricta oil meets specifications in biodiesel standards. - Abstract: Rhazya stricta Decne (R. stricta) is a hardy, drought-resistant, and arid land plant that is widely distributed from the Middle East to South Asia. The aim of this study was to evaluate the use of R. stricta seed oil as an alternative source of triacylglycerols that may be suitable for the synthesis of biodiesel. The oil content of the seeds was approximately 14% and was mainly composed of the fatty acids linoleic (60.95%) and oleic (25.48%) acid. R. stricta methyl esters (RSME) were prepared by a base-catalyzed transesterification reaction. The conversion rate of the triacylglycerols to the corresponding methyl esters was determined by 1H-NMR to be approximately 97%. This study showed that the fuel properties of the RSMEs are comparable to other vegetable oil methyl esters that are commonly used as biodiesels. R. stricta plantations will therefore be suitable for promoting sustainable agriculture and for producing biodiesel with viable prices in arid and semi-arid regions throughout the world

  15. Acid-Catalyzed Transesterification Reaction of Beef Tallow For Biodiesel Production By Factor Variation

    Directory of Open Access Journals (Sweden)

    R.C. Ehiri

    2014-07-01

    Full Text Available Biodiesel is a diesel grade fuel made by transesterification reaction of vegetable oils and animal fats with alcohol. Three variable factors that affect the yield of biodiesel namely, reaction time, reaction temperature and catalyst concentration were studied in this work. The biodiesel was produced via a batchprocess acid-catalyzed transesterification reaction of beef tallow with methanol. Optimal conditions for the reaction were established in a three factor two-level (23 central composite design with the biodiesel pretreatment yield as the response surface. The results show that the mean yield of biodiesel was 92.04% with a standard deviation of 5.16. An optimal biodiesel yield of 96.30% occurred at 0.5% HCl catalyst concentration and at constant conditions of 1.5h reaction time, 60oC reaction temperature and 6:1 methanol: tallow volume ratio. Gas chromatographic analysis of the beef tallow identified palmitic, stearic and oleic acids in it while the fatty acid methyl esters in the biodiesel product were oleate and linoleate. Catalysis was the most significant factor in the transesterification process.

  16. Production of Biodiesel from Lipid of Phytoplankton Chaetoceros calcitrans through Ultrasonic Method

    Directory of Open Access Journals (Sweden)

    Raymond Kwangdinata

    2014-01-01

    Full Text Available A research on production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method has been done. In this research, we carried out a series of phytoplankton cultures to determine the optimum time of growth and biodiesel synthesis process from phytoplankton lipids. Process of biodiesel synthesis consists of two steps, that is, isolation of phytoplankton lipids and biodiesel synthesis from those lipids. Oil isolation process was carried out by ultrasonic extraction method using ethanol 96%, while biodiesel synthesis was carried out by transesterification reaction using methanol and KOH catalyst under sonication. Weight of biodiesel yield per biomass Chaetoceros calcitrans is 35.35%. Characterization of biodiesel was well carried out in terms of physical properties which are density and viscosity and chemical properties which are FFA content, saponification value, and iodine value. These values meet the American Society for Testing and Materials (ASTM D6751 standard levels, except for the viscosity value which was 1.14 g·cm−3.

  17. Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell

    Directory of Open Access Journals (Sweden)

    S. Ismail

    2016-01-01

    Full Text Available The catalytic potential of calcium oxide synthesized from mud clam shell as a heterogeneous catalyst for biodiesel production was studied. The mud clam shell calcium oxide was characterized using particle size analyzer, Fourier transform infrared spectroscopy, scanning electron microscopy, and BET gas sorption analyzer. The catalyst performance of mud clam shell calcium oxide was studied in the transesterification of castor oil as biodiesel. Catalyst characterization and transesterification study results of synthesized catalyst proved the efficiency of the natural derived catalyst for biodiesel production. A highest biodiesel yield of 96.7% was obtained at optimal parameters such as 1 : 14 oil-to-methanol molar ratio, 3% w/w catalyst concentration, 60°C reaction temperature, and 2-hour reaction time. Catalyst reusability test shows that the synthesized calcium oxide from mud clam shell is reusable up to 5 times.

  18. High free fatty acid coconut oil as a potential feedstock for biodiesel production in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Nakpong, Piyanuch; Wootthikanokkhan, Sasiwimol [Department of Chemistry, Faculty of Science and Technology, Rajamangala University of Technology Krungthep, 2 Nanglinchee Road, Sathorn, Bangkok 10120 (Thailand)

    2010-08-15

    Coconut oil having 12.8% free fatty acid (FFA) was used as a feedstock to produce biodiesel by a two-step process. In the first step, FFA level of the coconut oil was reduced to 0.6% by acid-catalyzed esterification. In the second step, triglycerides in product from the first step were transesterified with methanol by using an alkaline catalyst to produce methyl esters and glycerol. Effect of parameters related to these processes was studied and optimized, including methanol-to-oil ratio, catalyst concentration, reaction temperature, and reaction time. Methyl ester content of the coconut biodiesel was determined by GC to be 98.4% under the optimum condition. The viscosity of coconut biodiesel product was very close to that of Thai petroleum diesel and other measured properties met the Thai biodiesel (B100) specification. (author)

  19. Characterization of ionic liquid‐based biocatalytic two‐phase reaction system for production of biodiesel

    DEFF Research Database (Denmark)

    Prabhavathi Devi, Bethala Lakshmi Anu; Guo, Zheng; Xu, Xuebing

    2011-01-01

    The property of a variety of ionic liquids (ILs) as reaction media was evaluated for the production of biodiesel by enzymatic methanolysis of rapeseed oil. The IL Ammoeng 102, containing tetraaminum cation with C18 acyl and oligoethyleneglycol units, was found to be capable of forming oil....../IL biphasic reaction system by mixing with substrates, which is highly effective for the production of biodiesel with more than 98% biodiesel yield and nearly 100% conversion of oil. Conductor‐like screening model for real solvent (COSMO‐RS) in silico prediction of substrate solubility and simulation...... of partition coefficient change vs. reaction evolution indicated that the amphiphilic property of Ammoeng 102 might be responsible for creating efficient interaction of immiscible substrates; while big difference of partition coefficients of generated biodiesel and glycerol between the two phases suggests...

  20. Economics of biodiesel production in the context of fulfilling 20% blending with petro-diesel in Nepal

    DEFF Research Database (Denmark)

    Parajuli, Ranjan

    2014-01-01

    The dependency on imported petro-diesel along with the escalating price are adversely affecting the national economy of Nepal. As an alternative fuel, prospects of biodiesel production for partial substitution of petro-diesel are felt necessary to reduce the dependency on fossil fuel. This article...... outlines the economics of biodiesel production in the country. Three different cases are developed for the economic analysis in the chain of biodiesel production, which are aimed to overview the influences of yield of plant, cost of cultivation, and price of raw oilseeds to the production cost of biodiesel....... The study concludes that the biodiesel production is economically viable with a plant yield greater than 2 kg/plant and with the price of oil seeds lower than 0.22 USD/kg, which has a positive return on investment. With the yield lower than 2 kg/plant, the production cost of biodiesel cannot compete...

  1. Techno-Economic Evaluation of Biodiesel Production from Waste Cooking Oil—A Case Study of Hong Kong

    Directory of Open Access Journals (Sweden)

    Sanjib Kumar Karmee

    2015-02-01

    Full Text Available Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices.

  2. Techno-Economic Evaluation of Biodiesel Production from Waste Cooking Oil—A Case Study of Hong Kong

    Science.gov (United States)

    Karmee, Sanjib Kumar; Patria, Raffel Dharma; Lin, Carol Sze Ki

    2015-01-01

    Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO) can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR) sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices. PMID:25809602

  3. Techno-economic evaluation of biodiesel production from waste cooking oil--a case study of Hong Kong.

    Science.gov (United States)

    Karmee, Sanjib Kumar; Patria, Raffel Dharma; Lin, Carol Sze Ki

    2015-02-18

    Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO) can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR) sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices.

  4. Biodiesel production from various oils under supercritical fluid conditions by Candida antartica lipase B using a stepwise reaction method.

    Science.gov (United States)

    Lee, Jong Ho; Kwon, Cheong Hoon; Kang, Jeong Won; Park, Chulhwan; Tae, Bumseok; Kim, Seung Wook

    2009-05-01

    In this study, we evaluate the effects of various reaction factors, including pressure, temperature, agitation speed, enzyme concentration, and water content to increase biodiesel production. In addition, biodiesel was produced from various oils to establish the optimal enzymatic process of biodiesel production. Optimal conditions were determined to be as follows: pressure 130 bar, temperature 45 degrees C, agitation speed 200 rpm, enzyme concentration 20%, and water contents 10%. Among the various oils used for production, olive oil showed the highest yield (65.18%) upon transesterification. However, when biodiesel was produced using a batch system, biodiesel conversion yield was not increased over 65%; therefore, a stepwise reaction was conducted to increase biodiesel production. When a reaction medium with an initial concentration of methanol of 60 mmol was used and adjusted to maintain this concentration of methanol every 1.5 h during biodiesel production, the conversion yield of biodiesel was 98.92% at 6 h. Finally, reusability was evaluated using immobilized lipase to determine if this method was applicable for industrial biodiesel production. When biodiesel was produced repeatedly, the conversion rate was maintained at over 85% after eight reuses.

  5. Enhancement of lipid production and fatty acid profiling in Chlamydomonas reinhardtii, CC1010 for biodiesel production.

    Science.gov (United States)

    Karpagam, R; Preeti, R; Ashokkumar, B; Varalakshmi, P

    2015-11-01

    Lipid from microalgae is one of the putative oil resources to facilitate the biodiesel production during this era of energy dissipation and environmental pollution. In this study, the key parameters such as biomass productivity, lipid productivity and lipid content were evaluated at the early stationary phase of Chlamydomonas reinhardtii, CC1010 cultivated in nutrient starved (nitrogen, phosphorous), glucose (0.05%, 0.1%, 0.15% and 0.2%) and vitamin B12 supplementation (0.001%, 0.002% and 0.003%) in Tris-Acetate-Phosphate (TAP) medium. The lipid content in nitrogen starved media was 61% which is 2.34 folds higher than nutrient sufficient TAP medium. Glucose supplementation has lead to proportional increase in biomass productivity with the increasing concentration of glucose whereas vitamin B12 supplementations had not shown any influence in lipid and biomass production. Further, fatty acid methyl ester (FAME) profiling of C. reinhardtii, CC 1010 has revealed more than 80% of total SFA (saturated fatty acid) and MUFA (mono unsaturated fatty acid) content. Quality checking parameters of biodiesel like cetane number, saponification value, iodine number and degree of unsaturation were analyzed and the biodiesel fuel properties were found to be appropriate as per the international standards, EN 14214 and ASTM D6751. Conclusively, among all the treatments, nitrogen starvation with 0.1% glucose supplementation had yielded high lipid content in C. reinhardtii, CC 1010. PMID:25838071

  6. Enhancement of lipid production and fatty acid profiling in Chlamydomonas reinhardtii, CC1010 for biodiesel production.

    Science.gov (United States)

    Karpagam, R; Preeti, R; Ashokkumar, B; Varalakshmi, P

    2015-11-01

    Lipid from microalgae is one of the putative oil resources to facilitate the biodiesel production during this era of energy dissipation and environmental pollution. In this study, the key parameters such as biomass productivity, lipid productivity and lipid content were evaluated at the early stationary phase of Chlamydomonas reinhardtii, CC1010 cultivated in nutrient starved (nitrogen, phosphorous), glucose (0.05%, 0.1%, 0.15% and 0.2%) and vitamin B12 supplementation (0.001%, 0.002% and 0.003%) in Tris-Acetate-Phosphate (TAP) medium. The lipid content in nitrogen starved media was 61% which is 2.34 folds higher than nutrient sufficient TAP medium. Glucose supplementation has lead to proportional increase in biomass productivity with the increasing concentration of glucose whereas vitamin B12 supplementations had not shown any influence in lipid and biomass production. Further, fatty acid methyl ester (FAME) profiling of C. reinhardtii, CC 1010 has revealed more than 80% of total SFA (saturated fatty acid) and MUFA (mono unsaturated fatty acid) content. Quality checking parameters of biodiesel like cetane number, saponification value, iodine number and degree of unsaturation were analyzed and the biodiesel fuel properties were found to be appropriate as per the international standards, EN 14214 and ASTM D6751. Conclusively, among all the treatments, nitrogen starvation with 0.1% glucose supplementation had yielded high lipid content in C. reinhardtii, CC 1010.

  7. Advances in solid-catalytic and non-catalytic technologies for biodiesel production

    International Nuclear Information System (INIS)

    Highlights: • The recent technologies for promoting biodiesel synthesis were elucidated. • The design of catalyst consideration of biodiesel production was proposed. • The recent advances and remaining difficulties in biodiesel synthesis were outlined. • The future research trend in biodiesel synthesis was highlighted. - Abstract: The insecure supply of fossil fuel coerces the scientific society to keep a vision to boost investments in the renewable energy sector. Among the many renewable fuels currently available around the world, biodiesel offers an immediate impact in our energy. In fact, a huge interest in related research indicates a promising future for the biodiesel technology. Heterogeneous catalyzed production of biodiesel has emerged as a preferred route as it is environmentally benign needs no water washing and product separation is much easier. The number of well-defined catalyst complexes that are able to catalyze transesterification reactions efficiently has been significantly expanded in recent years. The activity of catalysts, specifically in application to solid acid/base catalyst in transesterification reaction depends on their structure, strength of basicity/acidity, surface area as well as the stability of catalyst. There are various process intensification technologies based on the use of alternate energy sources such as ultrasound and microwave. The latest advances in research and development related to biodiesel production is represented by non-catalytic supercritical method and focussed exclusively on these processes as forthcoming transesterification processes. The latest developments in this field featuring highly active catalyst complexes are outlined in this review. The knowledge of more extensive research on advances in biofuels will allow a deeper insight into the mechanism of these technologies toward meeting the critical energy challenges in future

  8. Production of Biodiesel from Oleic Acid and Methanol by Reactive Distillation

    OpenAIRE

    Kusmiyati Kusmiyati; Agung Sugiharto

    2010-01-01

    Biodiesel is an alternative diesel fuel that is produced from vegetable oils and animal fats. Generally, it is formed by transesterification reaction of triglycerides in the vegetable oil or animal fat with an alcohol. In this work, esterification reaction was carried out using oleic acid, methanol and sulphuric acid as a catalyst by reactive distillation method. In order to determine the best conditions for biodiesel production by reactive distillation, the experiments were carried out at di...

  9. Catalyst-free ethyl biodiesel production from rice bran under subcritical condition

    Science.gov (United States)

    Zullaikah, Siti; Afifudin, Riza; Amalia, Rizky

    2015-12-01

    In-situ ethyl biodiesel production from rice bran under subcritical water and ethanol with no catalyst was employed. This process is environmentally friendly and is very flexible in term of feedstock utilization since it can handle relatively high moisture and free fatty acids (FFAs) contents. In addition, the alcohol, i.e. bioethanol, is a non-toxic, biodegradable, and green raw material when produced from non-edible biomass residues, leading to a 100% renewable biodiesel. The fatty acid ethyl esters (FAEEs, ethyl biodiesel) are better than fatty acid methyl esters (FAMEs, methyl biodiesel) in terms of fuel properties, including cetane number, oxidation stability and cold flow properties. The influences of the operating variables such as reaction time (1 - 10 h), ethanol concentration (12.5 - 87.5%), and pressurizing gas (N2 and CO2) on the ethyl biodiesel yield and purity have been investigated systematically while the temperature and pressure were kept constant at 200 °C and 40 bar. The optimum results were obtained at 5 h reaction time and 75% ethanol concentration using CO2 as compressing gas. Ethyl biodiesel yield and purity of 58.78% and 61.35%, respectively, were obtained using rice bran with initial FFAs content of 37.64%. FFAs level was reduced to 14.22% with crude ethyl biodiesel recovery of 95.98%. Increasing the reaction time up to 10 h only increased the yield and purity by only about 3%. Under N2 atmosphere and at the same operating conditions (5h and 75% ethanol), ethyl biodiesel yield and purity decreased to 54.63% and 58.07%, respectively, while FFAs level was increased to 17.93% and crude ethyl biodiesel recovery decreased to 87.32%.

  10. Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

    Science.gov (United States)

    Dassey, Adam J; Theegala, Chandra S

    2014-01-01

    Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

  11. HEAT EXCHANGE NETWORKS IN BIODIESEL PRODUCTION FROM WASTE COOKING OILS

    Directory of Open Access Journals (Sweden)

    María Fernanda Laborde

    2014-11-01

    Full Text Available With the objective to aboard one of the challenges in Engineering teaching: It´s the application in professional practice?, along with attending to the actual requirements of achieve energetic efficiency in industrial process and to reuse wastes of food industry, this work, presents the application of heat exchange networks for the resolution of a real case: pre-treatment of waste cooking oils (WCO withacid catalysis for biodiesel production. Different methods and software are applied to obtain the minimum amounts of heat and the heat exchange network for a processing capacity of 0,19 kg/s of WCO. A minimum temperature difference (Tmin of 10°C is considered and the minimum requirements of heating and cooling result 4629,87 W and 10066,30 W, respectively. If this exchange network is not considered, this values increase to 26838,33 W and 21958,33 W, respectively. Applying heat exchange network, decrease 78,92% the required steam service in the process and water cooling service decreases 62,48%, demonstrating that integration reduces energetic requirements respect the non-integrated process.

  12. Selenastrum Capricornutum: Harvesting and Oil Extraction, for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Leticia Pérez

    2015-06-01

    Full Text Available An alternative for biodiesel production is the use of lipids from microalgae. Although all steps to obtain this biofuel are important, harvesting and extraction are the most important. Advances in these areas are necessary in order to obtain third-generation fuels. The purpose of the present study is to compare different methods of lipids extraction and harvesting for freshwater Selenastrum Capricornutum microalgae. The method used for harvesting was flocculation with inorganic agent. Copper (II Sulphate (CuSO4 was used as flocculant, resulting in the best percentage of recovery (76% for a dose of 2 g/L. Previously oil extraction, the collected samples were homogenized and their moisture content was analysed obtaining values of 55-96%. Two extraction methods were used: Soxhlet and ultrasound. The use of ultrasound favours cell disruption and increases the extraction yield. In extraction methods, polar, non-polar solvents, and mixes of solvents were used. N-hexane and acetone were used as solvents for Soxhlet extraction, and ethanol, acetone, methanol, chloroform, and a mixture of chloroform and methanol in 1:2 and 2:1 ratios, for extraction ultrasound assisted method. The use of the methanol-assisted ultrasound is the most efficient method for lipids extraction for Selenastrum Capricornutum biomass. Keywords: microalgae, extraction, ultrasound, Soxhlet, solvent, harvesting

  13. Biodiesel Supplement

    Science.gov (United States)

    1. What are the greatest challenges facing the biodiesel industry today? The greatest challenges are probably related to the amount of feedstock being available if the current expansion in biodiesel production and use continues. This challenge is addressed below under question 2 regarding the hur...

  14. Improvement in biodiesel production from soapstock oil by one-stage lipase catalyzed methanolysis

    International Nuclear Information System (INIS)

    Highlights: • Soapstock is a less expensive feedstock reservoir for biodiesel production. • Addition of tert-alcohol can enhance the yield of fatty acid methyl ester significantly. • One-stage lipase catalyzed methanolysis of soapstock oil was successfully developed. • FAME yield of 95.2% was obtained with low lipase loading in a shorter reaction time. - Abstract: A major obstacle in the commercialization of biodiesel is its cost of manufacturing, primarily the raw material cost. In order to decrease the cost of biodiesel, soapstock oil was investigated as the feedstock for biodiesel production. Because the soapstock oil containing large amounts of free fatty acids (FFAs) cannot be effectively converted to biodiesel, complicated two-stage process (esterification followed by transesterification) was generally adopted. In this study, simple one-stage lipase catalyzed methanolysis of soapstock oil was developed via one-pot esterification and transesterification. Water produced by lipase catalyzed esterification of FFAs affected the lipase catalyzed transesterification of glycerides in the soapstock oil severely. Addition of tert-alcohol could overcome this problem and enhance the fatty acid methyl ester (FAME) yield from 42.8% to 76.4%. The FAME yield was further elevated to 95.2% by optimizing the methanol/oil molar ratio, lipase amount, and water absorbent. The developed process enables the simple, efficient, and green production of biodiesel from soapstock oil, providing with a potential industrial application

  15. Exploration of upstream and downstream process for microwave assisted sustainable biodiesel production from microalgae Chlorella vulgaris.

    Science.gov (United States)

    Sharma, Amit Kumar; Sahoo, Pradeepta Kumar; Singhal, Shailey; Joshi, Girdhar

    2016-09-01

    The present study explores the integrated approach for the sustainable production of biodiesel from Chlorella vulgaris microalgae. The microalgae were cultivated in 10m(2) open raceway pond at semi-continuous mode with optimum volumetric and areal production of 28.105kg/L/y and 71.51t/h/y, respectively. Alum was used as flocculent for harvesting the microalgae and optimized at different pH. Lipid was extracted using chloroform: methanol (2:1) and having 12.39% of FFA. Effect of various reaction conditions such as effect of catalyst, methanol:lipid ratio, reaction temperature and time on biodiesel yields were studied under microwave irradiation; and 84.01% of biodiesel yield was obtained under optimized reaction conditions. A comparison was also made between the biodiesel productions under conventional heating and microwave irradiation. The synthesized biodiesel was characterized by (1)H NMR, (13)C NMR, FTIR and GC; however, fuel properties of biodiesel were also studied using specified test methods as per ASTM and EN standards. PMID:27318156

  16. Optimization and Modeling of Process Variables of Biodiesel Production from Marula Oil using Response Surface Methodology

    International Nuclear Information System (INIS)

    This paper presents an optimization study in the production of biodiesel production from Marula oil. The study was carried out using a central composite design of experiments under response surface methodology. A mathematical model was developed to correlate the transesterification process variables to biodiesel yield. The transesterification reaction variables were methanol to oil ratio, x /sub 1/ (10-50 wt percentage), reaction time, x /sub 2/ (30-90 min), reaction temperature, x /sub 3/ (30-90 Degree C) stirring speed, x /sub 4/ (100-400 rpm) and amount of catalyst, x /sub 5/ (0.5-1.5 g). The optimum conditions for the production of the biodiesel were found to be methanol to oil ratio (29.43 wt percentage), reaction time (59.17 minutes), reaction temperature (58.80 Degree C), stirring speed (325 rpm) and amount of catalyst (1.02 g). The optimum yield of biodiesel that can be produced was 95 percentage. The results revealed that the crucial fuel properties of the biodiesel produced at the optimum conditions met the ASTM biodiesel specifications. (author)

  17. Catalyst systems in the production of biodiesel from residual oil; Sistemas cataliticos na producao de biodiesel por meio de oleo residual

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Carlos Alexandre de [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2006-07-01

    The vegetable oils and fat animals appear like an alternative for substitution the diesel oil in ignition engines for compression. Submitting the oil on transesterification reaction, we obtain a fuel with same characteristics as diesel, called biodiesel. Generally, 85 per cent of biodiesel cost is from the oil production. Through transesterification vegetable oil can be transformed in a mixture of esters of fatty acids. The residual oil from frying has been used as a possibility of raw materials of biodiesel, due to its easy acquisition and the viability of not being discarded as waste. (author)

  18. A study on production of biodiesel using a novel solid oxide catalyst derived from waste.

    Science.gov (United States)

    Majhi, Samrat; Ray, Srimanta

    2016-05-01

    The issues of energy security, dwindling supply and inflating price of fossil fuel have shifted the global focus towards fuel of renewable origin. Biodiesel, having renewable origin, has exhibited great potential as substitute for fossil fuels. The most common route of biodiesel production is through transesterification of vegetable oil in presence of homogeneous acid or base or solid oxide catalyst. But, the economics of biodiesel is not competitive with respect to fossil fuel due to high cost of production. The vegetable oil waste is a potential alternative for biodiesel production, particularly when disposal of used vegetable oil has been restricted in several countries. The present study evaluates the efficacy of a low-cost solid oxide catalyst derived from eggshell (a food waste) in transesterification of vegetable oil and simulated waste vegetable oil (SWVO). The impact of thermal treatment of vegetable oil (to simulate frying operation) on transesterification using eggshell-derived solid oxide catalyst (ESSO catalyst) was also evaluated along with the effect of varying reaction parameters. The study reported that around 90 % biodiesel yield was obtained with vegetable oil at methanol/oil molar ratio of 18:1 in 3 h reaction time using 10 % ESSO catalyst. The biodiesel produced with ESSO catalyst from SWVO, thermally treated at 150 °C for 24 h, was found to conform with the biodiesel standard, but the yield was 5 % lower compared to that of the untreated oil. The utilization of waste vegetable oil along with waste eggshell as catalyst is significant for improving the overall economics of the biodiesel in the current market. The utilization of waste for societal benefit with the essence of sustainable development is the novelty of this work. PMID:26154033

  19. A study on production of biodiesel using a novel solid oxide catalyst derived from waste.

    Science.gov (United States)

    Majhi, Samrat; Ray, Srimanta

    2016-05-01

    The issues of energy security, dwindling supply and inflating price of fossil fuel have shifted the global focus towards fuel of renewable origin. Biodiesel, having renewable origin, has exhibited great potential as substitute for fossil fuels. The most common route of biodiesel production is through transesterification of vegetable oil in presence of homogeneous acid or base or solid oxide catalyst. But, the economics of biodiesel is not competitive with respect to fossil fuel due to high cost of production. The vegetable oil waste is a potential alternative for biodiesel production, particularly when disposal of used vegetable oil has been restricted in several countries. The present study evaluates the efficacy of a low-cost solid oxide catalyst derived from eggshell (a food waste) in transesterification of vegetable oil and simulated waste vegetable oil (SWVO). The impact of thermal treatment of vegetable oil (to simulate frying operation) on transesterification using eggshell-derived solid oxide catalyst (ESSO catalyst) was also evaluated along with the effect of varying reaction parameters. The study reported that around 90 % biodiesel yield was obtained with vegetable oil at methanol/oil molar ratio of 18:1 in 3 h reaction time using 10 % ESSO catalyst. The biodiesel produced with ESSO catalyst from SWVO, thermally treated at 150 °C for 24 h, was found to conform with the biodiesel standard, but the yield was 5 % lower compared to that of the untreated oil. The utilization of waste vegetable oil along with waste eggshell as catalyst is significant for improving the overall economics of the biodiesel in the current market. The utilization of waste for societal benefit with the essence of sustainable development is the novelty of this work.

  20. Identification of regulatory barriers in the production of biodiesel in Brazil; Identificacao de entraves regulatorios na producao de biodiesel no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Marcelo Santana [Instituto Federal de Educacao, Ciencia e Tecnologia da Bahia (IFBA), Santo Amaro, BA (Brazil)], email: marcelosilva@ifba.edu.br; Teixeira, Francisco Lima Cruz [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil); Torres, Ednildo Andrade [Universidade Federal da Bahia (CIEnAm/UFBA), Salvador, BA (Brazil). Centro Interdisciplinar de Energia e Ambiente

    2010-07-01

    At a time when biofuels are in evidence in the international arena, it is essential to discuss this new market, in particular the biodiesel. To achieve agricultural and industrial sustainability, the main argument is that replacing oil with biofuels raises some questions, because of the lack of experience with the new productive chains. Due to the way the Biodiesel program is being implemented, this program presents several obstacles. Thus, this study aims to investigate the elements in the regulatory hurdles for the production of Biodiesel. In this work it was adopted qualitative descriptive and exploratory procedures, including desk research and recognition of perceptions through questionnaires to staff intentionally selected from different parts of the productive chain, through non-probabilistic sampling. The survey showed the following barriers: differentiated subsidies, which hinder the production of biodiesel by intensive agriculture and benefit familiar agriculture, do not encourage other regions of the country, or other raw material (animal tallow and ORG); incoherent taxation considering the quantity purchased raw materials; strict control on the region distribution to claim the Social Fuel Seal; it isn't prioritized environmental issues in their regulatory context; there's no prestige to small industry, cooperatives and associations; there is a tax for alcohol applied in biodiesel production; and the law penalizes biodiesel plants for the sale of hydrated alcohol. It was observed that these obstacles hinder the increase in biodiesel production, resulting in countless idle biodiesel plants. In this sense, it was found that the regulatory framework needs to be revised due to the investigated barriers. (author)

  1. Current status and outlook in the application of microalgae in biodiesel production and environmental protection

    Directory of Open Access Journals (Sweden)

    Xin eZhang

    2014-08-01

    Full Text Available Microalgae have been currently recognized as one group of the most potential feedstocks for biodiesel production due to high productivity potential, efficient biosynthesis of lipids and less competition with food production. Moreover, utilization of microalgae with environmental purposes (CO2 fixation, NOX and wastewater treatment and biorefinery have been reported. However, there are still challenges that need to be addressed to ensure stable large-scale production with positive net energy balance. This review gives an overview of the current status of the application of microalgae in biodiesel production and environmental protection. The practical problems not only facing the microalgae biodiesel production but also associated with microalgae application for environmental pollution control, in particular biological fixation of greenhouse gas (CO2 and NOX and wastewater treatment are described in detail. Notably, the synergistic combination of various applications (e.g. food, medicine, wastewater treatment and flue gas treatment with biodiesel production could enhance the sustainability and economics of the algal biodiesel production system.

  2. Macroeconomic evaluation of rape cultivation for biodiesel production in Germany. Preliminary report from ifo Schnelldienst No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Schoepe, M.; Britschkat, G.

    2002-03-01

    Biodiesel has been produced for the German market since 1993. With domestic biodiesel production of the year 2001, about 500 million litres of fossil diesel could be substituted. At the same time, glycerine is produced as a by-product, as well as rape meal, a high-quality protein fodder. The economic output of the rape biodiesel production chain contributes directly and indirectly to additional government revenue. Summing up the tax return flows and additional social insurance income, the ''compensating performance'' of the rape biodiesel production chain amounts to 73% and 83% respectively of government revenue shortfalls. (orig.)

  3. Optimization of process configuration and strain selection for microalgae-based biodiesel production.

    Science.gov (United States)

    Yu, Nan; Dieu, Linus Tao Jie; Harvey, Simon; Lee, Dong-Yup

    2015-10-01

    A mathematical model was developed for the design of microalgae-based biodiesel production system by systematically integrating all the production stages and strain properties. Through the hypothetical case study, the model suggested the most economical system configuration for the selected microalgae strains from the available processes at each stage, thus resulting in the cheapest biodiesel production cost, S$2.66/kg, which is still higher than the current diesel price (S$1.05/kg). Interestingly, the microalgae strain properties, such as lipid content, effective diameter and productivity, were found to be one of the major factors that significantly affect the production cost as well as system configuration.

  4. Assessing the experimental investigation of milk thistle oil for biodiesel production using base catalyzed transesterification

    International Nuclear Information System (INIS)

    In the present research work, non edible oil source milk thistle (Silybum marianum (L.) Gaert) plant was investigated for biodiesel production. The extracted crude oil was 26.14% of the total seed dry weight. The free fatty acid content of oil was reduced from 0.56 mg KOH/g to 0.06 mg KOH/g by esterification before the synthesis of biodiesel. The highest conversion percentage of biodiesel was achieved 89.51% and 87.42% using solid base catalyst sodium hydroxide (0.75%) and potassium hydroxide (1.0%), respectively. The protocol for experiment was adjusted as follow: temperature (60 °C); time of reaction (2 h), steering (600 rpm) and the oil molar ratio was fixed 1:6. Qualitatively, the prepared biodiesel was quantified by GC chromatography, 13C &1H NMR (Nuclear Magnetic Resonance), AAS and FT-IR spectroscopy. The fuel properties of biodiesel were tested and compared with ASTM D6751 and EN 14214 standards. - Highlights: • Biodiesel production from non edible seeds of milk thistle species. • High percentage of oil extraction (26.14%) and biodiesel yield (92%). • Reduction in FFA contents via esterification 0.56 mg KOH/g – 0.06 mg KOH/g. • Quantification analysis of biodiesel using GC, 1H NMR, 13C NMR, FT-IR and AAS. • Fuel properties comparison with ASTM D6751 and EN 14214 standards

  5. Biodiesel production using calcium manganese oxide as catalyst and different raw materials

    International Nuclear Information System (INIS)

    Highlights: ► Biodiesel production using a calcium manganese oxide catalyst was studied. ► The active specie was Ca0.9Mn0.1O and its deactivation occurred by hydration. ► The studied catalyst presented lower activation temperature than CaO. ► Biodiesel production and quality using different raw materials is reported. ► Compared to the conventional process, biodiesel water content improved. - Abstract: The use of heterogeneous catalysts for biodiesel production aims to simplify the production process as well as to reduce purification costs and related environmental impacts. Calcium manganese oxide was recently identified by the authors as an interesting heterogeneous catalyst for biodiesel production from animal fat; however, the difference between this and other catalysts, the catalyst activation/deactivation mechanisms, its behaviour in the synthesis using different raw materials as well as the impacts of its use on product quality remained unclear. Therefore, the present work: (i) compared biodiesel production using calcium manganese oxide and other catalysts (CaO and NaOH); (ii) studied the reasons leading to activation/deactivation of the heterogeneous catalyst; (iii) analysed biodiesel heterogeneous synthesis using calcium manganese oxide and different raw materials (lard, waste frying oil and a mixture); and (iv) evaluated raw material and catalyst impact on the product quality. Considering the use of different catalysts, the results showed that, after 8 h of reaction, product purity was similar using the different catalysts, being 92.5 wt.% using both NaOH and calcium manganese oxide and 93.8 wt.% using CaO. The active species of the heterogeneous catalysts were CaO, in the case of calcinated calcium carbonate, and Ca0.9Mn0.1O, in the case of calcinated calcium manganese oxide. Because the deactivating species were different for both catalysts, the calcium manganese oxide required lower activation temperature, which should be an advantage. When

  6. From Fed-batch to Continuous Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Nordblad, Mathias; Woodley, John M.;

    2015-01-01

    In this this paper, we use mechanistic modelling to guide the development of acontinuous enzymatic process that is performed as a fed-batch operation. In this workwe use the enzymatic biodiesel process as a case study. A mechanistic model developedin our previous work was used to determine...... measured components (triglycerides, diglycerides, monoglycerides, free fatty acid and fatty acid methyl esters(biodiesel)) much better than using fed-batch data alone given the smaller residuals. We also observe a reduction in the correlation between the parameters.The model was then used to predict that 5...... reactors are required (with a combined residence time of 30 hours) to reach a final biodiesel concentration within 2 % of the95.6 mass % achieved in a fed-batch operation, for 24 hours....

  7. Biodiesel production from hydrolysate of Cyperus esculentus waste by Chlorella vulgaris.

    Science.gov (United States)

    Wang, Wenrui; Zhou, Wenwen; Liu, Jing; Li, Yonghong; Zhang, Yongkui

    2013-05-01

    To reduce the cost of algal-based biodiesel, a waste material from oil industry, Cyperus esculentus waste, was used as the carbon source of the oleaginous microalgae Chlorella vulgaris. It demonstrated that C. vulgaris grew better in C. esculentus waste hydrolysate (CEWH(1)) than in glucose medium under the same reducing sugar concentration. CEWH concentration influenced the cell growth and lipid production significantly. The maximum lipid productivity 438.85 mg l(-1) d(-1) was achieved at 40 g l(-1). Fed-batch culture was performed to further enhance lipid production. The maximum biomass, lipid content and lipid productivity were 20.75 g l(-1), 36.52%, and 621.53 mg l(-1) d(-1), respectively. The produced biodiesel was analyzed by GC-MS and the results suggested that lipids produced from CEWH could be a potential feedstock for biodiesel production. PMID:23548401

  8. Biodiesel production process optimization and characterization to assess the suitability of the product for varied environmental conditions

    Energy Technology Data Exchange (ETDEWEB)

    Eevera, T.; Rajendran, K.; Saradha, S. [Department of Biotechnology, Periyar Maniammai University, Periyar Nagar, Vallam, Thanjavur, Tamilnadu 613 403 (India)

    2009-03-15

    In this study, both edible (coconut oil, palm oil, groundnut oil, and rice bran oil) and non-edible oils (pongamia, neem and cotton seed oil) were used to optimize the biodiesel production process variables like catalyst concentration, amount of methanol required for reaction, reaction time and reaction temperature. The fuel properties like specific gravity, moisture content, refractive index, acid value, iodine number, saponification value and peroxide value were estimated. Based on the cetane number and iodine value, the methyl esters obtained from palm and coconut oils were not suitable to use as biodiesel in cold weather conditions, but for hot climate condition biodiesel obtained from the remaining oil sources is suitable. (author)

  9. A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

    Energy Technology Data Exchange (ETDEWEB)

    Birdwell, J.F., Jr.; McFarlane, J.; Schuh, D.L.; Tsouris, C; Day, J.N. (Nu-Energie, LLC); Hullette, J.N. (Nu-Energie, LLC)

    2009-09-01

    Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate

  10. A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

    International Nuclear Information System (INIS)

    Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate

  11. Production of Biodiesel (B100 from Jatropha Oil Using Sodium Hydroxide as Catalyst

    Directory of Open Access Journals (Sweden)

    Joshua Folaranmi

    2013-01-01

    Full Text Available This research work is about the production of biodiesel from jatropha oil. Other oils can also be used for the production, but jatropha was chosen because it is not edible therefore, it will not pose a problem to humans in terms of food competition. Before the transesterification process was carried out, some basic tests such as free fatty acid content, iodine value, and moisture content were carried out. This was done so as to ascertain quality yield of the biodiesel after the reaction. The production of the biodiesel was done with standard materials and under standard conditions which made the production a hitch-free one. The jatropha oil was heated to 60°C, and a solution of sodium methoxide (at 60°C was added to the oil and stirred for 45 minutes using a magnetic stirrer. The mixture was then left to settle for 24 hours. Glycerin, which is the byproduct, was filtered off. The biodiesel was then thoroughly washed to ensure that it was free from excess methanol and soap. The characterization was done at NNPC Kaduna refinery and petrochemicals. The result shows that the product meets the set standard for biodiesel.

  12. Review of the Production of Biodiesel from Waste Cooking Oil using Solid Catalysts

    Directory of Open Access Journals (Sweden)

    N.H. Said

    2015-06-01

    Full Text Available The need for fossil fuels and the emissions generated from these fuels are increasing daily. Researchers are concerned with global warming as well as climate change; and energy sustainability and material usages are important issues today. Waste cooking oil (WCO can be processed into biodiesel as an alternative fuel to replace diesel. Production of biodiesel using WCO as the feedstock has been of growing interest for the last two decades. A number of research papers related to the improvements in production, raw materials and catalyst selection have been published. This paper reviews the various types of heterogeneous solid catalyst in the production of biodiesel via the transesterification of WCO. The catalysts used can be classified according to their state presence in the transesterification reaction as homogeneous or heterogeneous catalysts. Homogeneous catalysts act in the same liquid phase as the reaction mixture, whereas heterogeneous catalysts act in a solid phase with the reaction mixture. Heterogeneous catalysts are non-corrosive, a green process and environmentally friendly. They can be recycled and used several times, thus offering a more economic pathway for biodiesel production. The advantages and drawbacks of these heterogeneous catalysts are presented. Future work focuses on the application of economically and environmentally friendly solid catalysts in the production of biodiesel using WCO as the raw material.

  13. Evaluation of the potential of 9 Nannochloropsis strains for biodiesel production.

    Science.gov (United States)

    Ma, Yubin; Wang, Zhiyao; Yu, Changjiang; Yin, Yehu; Zhou, Gongke

    2014-09-01

    Nannochloropsis have attracted sustained interest from algal biodiesel researchers due to their high biomass accumulation rate and high lipid content. There are six recognized species in the Nannochloropsis genus that are phylogenetically divided into Nannochloropsis gaditana, Nannochloropsis salina, Nannochloropsis granulata, Nannochloropsis limnetica, Nannochloropsis oceanica and Nannochloropsis oculata. In this study, the potential of 9 Nannochloropsis species from the 6 genus for biodiesel production was evaluated by determining their growth rate, biomass accumulation, lipid productivity, lipid composition, fatty acid profiles and biodiesel properties. The results showed that the best strain was N. oceanica IMET1, with lipid productivity of 158.76 ± 13.83 mg L(-1)day(-1), TAG production of 1.67 ± 0.20 g/L, favorable fatty acid profiles of C16-C18 (56.62 ± 1.96%) as well as suitable biodiesel properties of higher cetane number (54.61 ± 0.25), lower iodine number (104.85 ± 2.80 g I2/100g) and relative low cloud point (3.45 ± 0.50°C). N. oceanica IMET1 could be consider as valuable feedstock for microalgal biodiesel production.

  14. Potential plant oil feedstock for lipase-catalyzed biodiesel production in Thailand

    International Nuclear Information System (INIS)

    Twenty-seven types of plants found to contain more than 25% of oil (w/w) were selectively examined from 44 species. Saponification number (SN), iodine value (IV), cetane number (CN) and viscosity (η) of fatty acid methyl esters (FAMEs) of oils were empirically determined, and they varied from 182 to 262, 3.60 to 142.70, 39.32 to 65.80 and 2.29 to 3.95, respectively. Fatty acid compositions, IV, CN and η were used to predict the quality of FAMEs for use as biodiesel. FAMEs of plant oils of 15 species were found to be most suitable for use as biodiesel by meeting the major specification of biodiesel standards of Thailand, USA and European Standard Organization. The oils from these 15 species were further investigated for the conversion efficiency of biodiesel in lipase-catalyzed transesterification reaction with Novozyme 435 and Lipozyme RM IM. Oils of four species, palm (Elaeis guineensis), physic nut (Jatropha curcas), papaya (Carica papaya) and rambutan (Nephelium lappaceum), can be highly converted to biodiesel by transesterification using Novozyme 435- or Lipozyme RM IM-immobilized lipase as catalyst. Therefore, these selected plants would be economically considered as the feedstock for biodiesel production by biocatalyst

  15. Production characterization and working characteristics in DICI engine of Pongamia biodiesel.

    Science.gov (United States)

    Srinivasa Rao, M; Anand, R B

    2015-11-01

    Renewable energy plays a predominant role in solving the current energy requirement problems and biodiesel is a promising alternative fuel to tide over the energy crisis and conserve fossil fuels. The present work investigates an eco-friendly substitute for the replacement of fossil fuels and the experiments are designed to determine the effects of a catalyst in the biodiesel production processes. Pongamia pinnata oil was utilized to produce the biodiesel by using catalysts namely KOH and NaOH and the properties of the fuel were found by using Carbon Hydrogen Nitrogen Sulfur (CHNS) elemental analysis, Fourier Transform Infrared (FTIR) Spectroscopy, Gas Chromatography & Mass Spectrometry (GC-MS), and Proton Nuclear Magnetic Resonance ((1)H NMR) Spectroscopy and the thermophysical properties were compared with those of neat diesel. In continuation, the working characteristics of the biodiesel and biodiesel-water emulsions were accomplished in a four stroke compression ignition engine and the results were compared to those of neat diesel. It was found that the exhaust emission characteristics like brake specific carbon monoxide (BSCO), brake specific hydrocarbons (BSHC) and smoke opacity were better for neat biodiesel (except brake specific nitric oxide BSNO) than those of neat diesel.

  16. Potential plant oil feedstock for lipase-catalyzed biodiesel production in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Winayanuwattikun, Pakorn; Kaewpiboon, Chutima; Piriyakananon, Kingkaew; Tantong, Supalak; Thakernkarnkit, Weerasak; Yongvanich, Tikamporn [Department of Biochemistry, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Biofuel Production by Biocatalyst Research Unit, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Chulalaksananukul, Warawut [Department of Botany, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Biofuel Production by Biocatalyst Research Unit, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand)

    2008-12-15

    Twenty-seven types of plants found to contain more than 25% of oil (w/w) were selectively examined from 44 species. Saponification number (SN), iodine value (IV), cetane number (CN) and viscosity ({eta}) of fatty acid methyl esters (FAMEs) of oils were empirically determined, and they varied from 182 to 262, 3.60 to 142.70, 39.32 to 65.80 and 2.29 to 3.95, respectively. Fatty acid compositions, IV, CN and {eta} were used to predict the quality of FAMEs for use as biodiesel. FAMEs of plant oils of 15 species were found to be most suitable for use as biodiesel by meeting the major specification of biodiesel standards of Thailand, USA and European Standard Organization. The oils from these 15 species were further investigated for the conversion efficiency of biodiesel in lipase-catalyzed transesterification reaction with Novozyme 435 and Lipozyme RM IM. Oils of four species, palm (Elaeis guineensis), physic nut (Jatropha curcas), papaya (Carica papaya) and rambutan (Nephelium lappaceum), can be highly converted to biodiesel by transesterification using Novozyme 435- or Lipozyme RM IM-immobilized lipase as catalyst. Therefore, these selected plants would be economically considered as the feedstock for biodiesel production by biocatalyst. (author)

  17. Biodiesel production from vegetable oil and waste animal fats in a pilot plant.

    Science.gov (United States)

    Alptekin, Ertan; Canakci, Mustafa; Sanli, Huseyin

    2014-11-01

    In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as catalyst and methanol was used as alcohol in the pretreatment reactions. After reducing the FFA level of the animal fats to less than 1%, the transesterification reaction was completed with alkaline catalyst. Due to low FFA content of corn oil, it was directly subjected to transesterification. Potassium hydroxide was used as catalyst and methanol was used as alcohol for transesterification reactions. The fuel properties of methyl esters produced in the biodiesel pilot plant were characterized and compared to EN 14214 and ASTM D6751 biodiesel standards. According to the results, ester yield values of animal fat methyl esters were slightly lower than that of the corn oil methyl ester (COME). The production cost of COME was higher than those of animal fat methyl esters due to being high cost biodiesel feedstock. The fuel properties of produced methyl esters were close to each other. Especially, the sulfur content and cold flow properties of the COME were lower than those of animal fat methyl esters. The measured fuel properties of all produced methyl esters met ASTM D6751 (S500) biodiesel fuel standards.

  18. Process Optimization for Biodiesel Production from Corn Oil and Its Oxidative Stability

    Directory of Open Access Journals (Sweden)

    N. El Boulifi

    2010-01-01

    Full Text Available Response surface methodology (RSM based on central composite design (CCD was used to optimize biodiesel production process from corn oil. The process variables, temperature and catalyst concentration were found to have significant influence on biodiesel yield. The optimum combination derived via RSM for high corn oil methyl ester yield (99.48% was found to be 1.18% wt catalyst concentration at a reaction temperature of 55.6∘C. To determine how long biodiesel can safely be stored, it is desirable to have a measurement for the stability of the biodiesel against such oxidation. Storage time and oxygen availability have been considered as possible factors influencing oxidative instability. Biodiesel from corn oil was stored for a period of 30 months, and the physico-chemical parameters of samples were measured at regular interval of time. Results show that the acid value (AV, peroxide value (PV, and viscosity (ν increased while the iodine value (IV decreased. These parameters changed very significantly when the sample was stored under normal oxygen atmosphere. However, the ν, AV, and IV of the biodiesel sample which was stored under argon atmosphere were within the limit by the European specifications (EN 14214.

  19. Life cycle assessment of small-scale high-input Jatropha biodiesel production in India

    International Nuclear Information System (INIS)

    Highlights: → NEB and NER of high input Jatropha biodiesel system was higher than those of low input. → These values further increase on including the energy content of the co-products, and in the further years. → Maximum energy use was during oil extraction, followed by oil processing and fertilizer use. → Allocation of resources at right time and with proper care increase the overall system productivity. -- Abstract: In the current scenario of depleting energy resources, increasing food insecurity and global warming, Jatropha has emerged as a promising energy crop for India. The aim of this study is to examine the life cycle energy balance for Jatropha biodiesel production and greenhouse gas emissions from post-energy use and end combustion of biodiesel, over a period of 5 years. It's a case specific study for a small scale, high input Jatropha biodiesel system. Most of the existing studies have considered low input Jatropha biodiesel system and have used NEB (Net energy balance i.e. difference of energy output and energy input) and NER (Net energy ratio i.e. ratio of energy output to energy input) as indicators for estimating the viability of the systems. Although, many of them have shown these indicators to be positive, yet the values are very less. The results of this study, when compared with two previous studies of Jatropha, show that the values for these indicators can be increased to a much greater extent, if we use a high input Jatropha biodiesel system. Further, when compared to a study done on palm oil and Coconut oil, it was found even if the NEB and NER of biodiesel from Jatropha were lesser in comparison to those of Palm oil and Coconut oil, yet, when energy content of the co-products were also considered, Jatropha had the highest value for both the indicators in comparison to the rest two.

  20. Prion infected Meat-and-Bone Meal is still infectious after biodiesel production

    Science.gov (United States)

    The epidemic of bovine spongiform encephalopathy (BSE) has led to world-wide drop in the market for beef by-products, such as Meat-and-Bone Meal (MBM), a fat-containing product traditionally used as an animal feed supplement. While normal rendering is insufficient, the production of biodiesel from M...

  1. Production and optimization of biodiesel using mixed immobilized biocatalysts in packed bed reactor.

    Science.gov (United States)

    Bakkiyaraj, S; Syed, Mahin Basha; Devanesan, M G; Thangavelu, Viruthagiri

    2016-05-01

    Vegetable oils are used as raw materials for biodiesel production using transesterification reaction. Several methods for the production of biodiesel were developed using chemical (alkali and acidic compounds) and biological catalysts (lipases). Biodiesel production catalyzed by lipases is energy and cost-saving processes and is carried out at normal temperature and pressure. The need for an efficient method for screening larger number of variables has led to the adoption of statistical experimental design. In the present study, packed bed reactor was designed to study with mixed immobilized biocatalysts to have higher productivity under optimum conditions. Contrary to the single-step acyl migration mechanism, a two-step stepwise reaction mechanism involving immobilized Candida rugosa lipase and immobilized Rhizopus oryzae cells was employed for the present work. This method was chosen because enzymatic hydrolysis followed by esterification can tolerate high free fatty acid containing oils. The effects of flow rate and bed height on biodiesel yield were studied using two factors five-level central composite design (CCD) and response surface methodology (RSM). Maximum biodiesel yield of 85 and 81 % was obtained for jatropha oil and karanja oil with the optimum bed height and optimum flow rate of 32.6 cm and 1.35 L/h, and 32.6 cm and 1.36 L/h, respectively. PMID:25940482

  2. Biodiesel Production using Heterogeneous Catalyst in CSTR: Sensitivity Analysis and Optimization

    Science.gov (United States)

    Keong, L. S.; Patle, D. S.; Shukor, S. R.; Ahmad, Z.

    2016-03-01

    Biodiesel as a renewable fuel has emerged as a potential replacement for petroleum-based diesels. Heterogeneous catalyst has become the focus of researches in biodiesel production with the intention to overcome problems associated with homogeneous catalyzed processes. The simulation of heterogeneous catalyzed biodiesel production has not been thoroughly studied. Hence, a simulation of carbon-based solid acid catalyzed biodiesel production from waste oil with high FFA content (50 weight%) was developed in the present work to study the feasibility and potential of the simulated process. The simulated process produces biodiesel through simultaneous transesterification and esterification with the consideration of reaction kinetics. The developed simulation is feasible and capable to produce 2.81kmol/hr of FAME meeting the international standard (EN 14214). Yields of 68.61% and 97.19% are achieved for transesterification and esterification respectively. Sensitivity analyses of FFA composition in waste oil, methanol to oil ratio, reactor pressure and temperature towards FAME yield from both reactions were carried out. Optimization of reactor temperature was done to maximize FAME products.

  3. Response surface methodology assisted biodiesel production from waste cooking oil using encapsulated mixed enzyme.

    Science.gov (United States)

    Razack, Sirajunnisa Abdul; Duraiarasan, Surendhiran

    2016-01-01

    In the recent scenario, consumption of petroleum fuels has increased to greater height which has led to deforestation and decline in fossil fuels. In order to tackle the perilous situation, alternative fuel has to be generated. Biofuels play a vital role in substituting the diesel fuels as they are renewable and ecofriendly. Biodiesel, often referred to as green fuel, could be a potential replacement as it could be synthesized from varied substrates, advantageous being the microalgae in several ways. The present investigation was dealt with the interesterification of waste cooking oil using immobilised lipase from mixed cultures for biodiesel production. In order to standardize the production for a scale up process, the parameters necessary for interesterification had been optimized using the statistical tool, Central Composite Design - Response Surface Methodology. The optimal conditions required to generate biodiesel were 2 g enzyme load, 1:12 oil to methyl acetate ratio, 60 h reaction time and 35 °C temperature, yielding a maximum of 93.61% biodiesel. The immobilised lipase beads remain stable without any changes in their function and structure even after 20 cycles which made this study, less cost intensive. In conclusion, the study revealed that the cooking oil, a residue of many dining centers, left as waste product, can be used as a potential raw material for the production of ecofriendly and cost effective biofuel, the biodiesel.

  4. A ROBUST PROCESS FOR BIODIESEL PRODUCTION USING SUPERCRITICAL METHANOL

    Science.gov (United States)

    A literature review was conducted in order to insure the feedstock choice had the potential to bring about positive impacts in making progress toward sustainability. The use of algae for a biodiesel feedstock was chosen for the many benefits it provides. Algae produced via the...

  5. Further investigations into the suitability of peanuts for biodiesel production

    Science.gov (United States)

    Field studies were conducted during 2007 at multiple locations to continue investigations into the suitability and practicality of peanut (Arachis hypogaea L.) as a biodiesel feedstock. An evaluation was conducted at Dawson, GA, to assess 24 peanut cultivars for performance under low input growing ...

  6. Enzymatic pretreatment of low-grade oils for biodiesel production

    DEFF Research Database (Denmark)

    Nordblad, Mathias; Pedersen, Anders K.; Rancke-Madsen, Anders;

    2016-01-01

    The alkaline process for making biodiesel (fatty acidmethyl esters, or FAME) is highly efficient at the transesterification of glycerides. However, its performance is poor when it comes to using oil that contain significant amounts of free fatty acids (FFA).The traditional approach to such feed...

  7. In Situ Biodiesel Production from Residual Oil Recovered from Spent Bleaching Earth

    Directory of Open Access Journals (Sweden)

    Ramli Mat

    2011-05-01

    Full Text Available Currently, semi-refined and refined vegetable oils are used as a feedstock in biodiesel production. However, due to competition with conventional fossil fuel, economic reasons, shortage supply of food and its social impact on the global scale has somewhat slowed the development of biodiesel industry. Studies have been conducted to recover oil from mill palm oil operation especially from the spent bleaching earth. Hence, the study was to investigate the potential recovery of oil from spent bleaching earth to be used as a feedstock for biodiesel production. The effect of different types of catalysts (sodium hydroxide alkali and sulfuric acid catalysts on biodiesel yield was studied. In addition, the effect of volume addition of methanol to the weight of spent bleaching earth on the product yield was also studied. Furthermore, the effect of ratio of hexane to methanol was also carried out to determine its product yield. The studies were carried out in an in-situ biodiesel reactor system and the biodiesel product was analyzed using gas chromatography mass spectrometry. Result shows that the use of alkali catalyst produced the highest yield of biodiesel and the most optimum biodiesel yield was obtained when the methanol to spent bleaching earth ratio was 3.2:1 (gram of methanol: gram of SBE and hexane to methanol ratio of 0.6:1 (volume of hexane: volume of methanol. © 2011 BCREC UNDIP. All rights reserved(Received: 19th December 2010, Revised: 10th May 2011; Accepted: 18th May 2011[How to Cite: R. Mat, O.S. Ling, A. Johari, M. Mohamed. (2011. In Situ Biodiesel Production from Residual Oil Recovered from Spent Bleaching Earth. Bulletin of Chemical Reaction Engineering & Catalysis, 6(1: 53-57. doi:10.9767/bcrec.6.1.678.53-57][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.6.1.678.53-57 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/678 ] | View in 

  8. Estudo da viabilidade técnico-científica da produção de biodiesel a partir de resíduos gordurosos Evaluate the waste fatty acid by scientific and technical study to obtain biodiesel

    Directory of Open Access Journals (Sweden)

    António André Chivanga Barros

    2008-09-01

    Full Text Available Os resíduos gordurosos provenientes de caixas de gordura foram avaliados como substrato para obtenção de biodiesel, em escala laboratorial. Os resíduos foram desemulsificados, purificados e submetidos à reação química de transesterificação com catálise alcalina e esterificação com catálise ácida para a obtenção de ésteres etílicos. O produto obtido foi purificado por adsorção em coluna de sílica, e caracterizado por cromatografia gasosa com sistema de detecção de massa. Os percentuais de conversão da gordura em ésteres etílicos foram calculados com o fechamento dos balanços de massa do processo. Os produtos obtidos foram purificados com o uso de processos secundários de forma a viabilizar sua utilização como bicombustível e insumo para diversos processos industriais, respectivamente.Waste fatty acid, from fatty boxes was evaluated as feedstock to obtain biodiesel in a laboratory scale. The residues were desemulsified, purified and used to obtain ethyl esters, through the transesterification with alkaline catalysis and esterification with acid catalysis reactions. The product was purified by adsorption in column of silica, and characterized by GLC with mass detector. Using this methodology the fatty residues was converted in the ethyl esters showed the scientific e technical validation of this propose. The conversion of fatty acids in ethylic esters was calculated by mass balances processes same for the highs degradation of the residue evaluates. To purify the biodiesel and glycerol obtained was necessary secondary processes to increase the qualities of this full and to use the glycerin in many industrial processes.

  9. Design and Control of Thermally Coupled Reactive Distillation Sequence for Biodiesel Production

    Institute of Scientific and Technical Information of China (English)

    Li Lumin; Sun Lanyi; Xie Xu; Tian Yanan; Shang Jianlong; Tian Yuanyu

    2016-01-01

    Decreasing petroleum reserves and growing alternative fuels requirements have promoted the study of biodiesel production. In this work, two thermally coupled reactive distillation designs for biodiesel production were investigated, and the sensitivity analysis was conducted to obtain the appropriate design values. The thermodynamic analysis and economics evaluation were performed to estimate the superiority of the thermally coupled designs over the base case. The proposed biodiesel production processes were simulated using the simulator Aspen Plus, and calculation results show that the exergy loss and economic cost in the two thermally coupled designs can be greatly reduced. It is found that the thermally coupled side-stripper reactive distillation design provides more economic beneifts than the side-rectiifer one. The dynamic performance of the thermally coupled side-stripper design was investigated and the results showed that the proposed control structure could effectively handle large feed disturbances.

  10. Potential of waste frying oil as a feedstock for the production of bio-diesel

    Energy Technology Data Exchange (ETDEWEB)

    Quadri, Syed M Raza [Dept. of Chemical Engineering, Z.H.C.E.T, A.M.U, Aligarh (India)], e-mail: chemicalraza@gmail.com; Wani, Omar Bashir; Athar, Moina [Dept. of Petroleum Studies, Z.H.C.E.T, A.M.U, Aligarh (India)

    2012-11-01

    To face the challenges of climbing Petroleum demand and of climate changes related to Carbon dioxide emissions, interest grows in sustainable fuels made from organic matter. World production of bio fuels has experienced phenomenal growth. The search for alternatives to petroleum based fuel has led to the development of fuels from various renewable sources, including feed stocks, such as fats and oils. Several kinds of fuels can be derived from these feed stocks. One of them is biodiesel, which is mono alkyl esters of vegetables oils and animal fats and produced by transesterification of oil and fats with alcohols in the presence of acid, alkali or enzyme base catalysts. The main hurdle in using the biodiesel is its cost which is mainly the cost of virgin oil. In India every year Millions of liters of waste frying oil are discarded into the sewage system which adds cost to its treatment and add up to the pollution of ground water. This paper proposed the production of Bio-diesel from the very same waste frying oil. The production of Bio-diesel from this waste frying oil offers economic, social, environmental and health benefits. The Bio-diesel produced finds the same use as the conventional diesel but this happens to be cost effective.

  11. Production and Testing of Coconut Oil Biodiesel Fuel and its Blend

    Directory of Open Access Journals (Sweden)

    Oguntola J ALAMU

    2010-12-01

    Full Text Available Many researchers have successfully worked on generating energy from different alternative sources including solar and biological sources such as the conversion of trapped energy from sunlight to electricity and conversion of some renewable agricultural products to fuel. This work considers the use of coconut oil for the production of alternative renewable and environmental friendly biodiesel fuel as an alternative to conventional diesel fuel. Test quantities of coconut oil biodiesel were produced through transesterification reaction using 100g coconut oil, 20.0% ethanol (wt% coconut oil, 0.8% potassium hydroxide catalyst at 65°C reaction temperature and 120 min. reaction time. The experiment was carried out three times and average results evaluated. Low yield of the biodiesel (10.4% was obtained. The coconut oil biodiesel produced was subsequently blended with petroleum diesel and characterized as alternative diesel fuel through some ASTM standard fuel tests. The products were further evaluated by comparing specific gravity and viscosity of the biodiesel blend, the raw coconut oil and conventional petroleum diesel.

  12. Biodiesel production from marine cyanobacteria cultured in plate and tubular photobioreactors.

    Science.gov (United States)

    Selvan, B Karpanai; Revathi, M; Piriya, P Sobana; Vasan, P Thirumalai; Prabhu, D Immuanual Gilwax; Vennison, S John

    2013-03-01

    Carbon (neutral) based renewable liquid biofuels are alternative to petroleum derived transport fuels that contribute to global warming and are of a limited availability. Microalgae based biofuels are considered as promising source of energy. Lyngbya sp. and Synechococcus sp. were studied for the possibility of biodiesel production in different media such as ASNIII, sea water enrichment medium and BG11. The sea water enrichment medium was found superior in enhancing the growth rate of these microalgae. Nitrogen depletion has less effect in total chlorophyll a content, at the same time the lipid content was increased in both Lyngbya sp. and Synechococcus sp. by 1.4 and 1.2 % respectively. Increase in salinity from 0.5-1.0 M also showed an increase in the lipid content to 2.0 and 0.8 % in these strains; but a salinity of 1.5 M has a total inhibitory effect in the growth. The total biomass yield was comparatively higher in tubular LED photobioreactor than the fluorescent flat plated photobioreactor. Lipid extraction was obtained maximum at 60 degrees C in 1:10 sample: solvent ratio. GC-MS analysis of biodiesel showed high content of polyunsaturated fatty acids (PUFA; 4.86 %) than saturated fatty acid (SFA; 4.10 %). Biodiesel production was found maximum in Synechococcus sp. than Lyngbya sp. The viscosity of the biodiesel was closely related to conventional diesel. The results strongly suggest that marine microalgae could be used as a renewable energy source for biodiesel production.

  13. Integration process of biodiesel production from filamentous oleaginous microalgae Tribonema minus.

    Science.gov (United States)

    Wang, Hui; Gao, Lili; Chen, Lin; Guo, Fajin; Liu, Tianzhong

    2013-08-01

    Biodiesel production from microalgae has been receiving considerable attention. Past studies mainly relied on tiny sized single-cell oleaginous microalgal species, the biodiesel based on filamentous oleaginous microalgae was rarely reported. Thus, integrated process of biodiesel production from filamentous oleaginous microalgal strain Tribonema minus was studied in this work. The filamentous microalgae was cultivated for 21 days in 40 L glass panel, microalgae cells was harvested by DAF without any flocculants after the lipid content was 50.23%. After that, total lipid was extracted by subcritical ethanol from wet algal paste and 44.55% of crude lipid was triacylglycerols. Two-step catalytic conversion of pre-esterification and transesterification was adopted to convert the crude algal oil to biodiesel. The conversion rate of triacylglycerols reached 96.52% under the methanol to oil molar ratio of 12:1 during catalysis with 2% potassium hydroxide at 65°C for 30 min. The biodiesel product from T. minus conformed to Chinese National Standards.

  14. Evaluation of oil content and fatty acid composition in the USDA castor germplasm collection for biodiesel production.

    Science.gov (United States)

    Castor has potential as a feedstock for biodiesel production. The oil content and fatty acid composition in castor seed are important factors to determine the price for production and affect the key fuel properties of biodiesel. There were 1033 available castor accessions collected or donated from 4...

  15. In-situ biodiesel and sugar production from rice bran under subcritical condition

    Science.gov (United States)

    Zullaikah, Siti; Rahkadima, Yulia Tri

    2015-12-01

    An integrated method of producing biodiesel and sugar using subcritical water and methanol has been employed as a potential way to reduce the high cost of single biofuel production from rice bran. The effects of temperature, methanol to water ratio and reaction time on the biodiesel yield and purity, and the concentration of sugar in hydrolysate were investigated systematically. Biodiesel with yield and purity of 65.21%and 73.53%, respectively, was obtained from rice bran with initial free fatty acid (FFA) content of 37.64% under the following conditions: T= 200 oC, P= 4.0 MPa (using CO2 as pressurizing gas), ratio of rice bran/water/methanol of 1/2/6 (g/mL/mL), and 3 h of reaction time. FFAs level was reduced to 10.00% with crude biodiesel recovery of 88.69%. However, the highest biodiesel yield (67.39%) and crude biodiesel recovery (100.00%) were obtained by decreasing the amount of methanol so that the ratio of rice bran/water/methanol became 1/4/4, g/mL/mL. In addition, the highest sugar concentration of 0.98 g/L was obtained at 180 oC and 4.0 MPa with ratio of rice bran/water/methanol of 1/4/4 (g/mL/mL) and reaction time of 3 h. Since no catalyst was employed and the biodiesel and reducing sugar were produced directly from rice bran with high water and FFA contents, the process was simple and environmentally friendly, which would make the production of biofuel more economical and sustainable.

  16. Biodiesel exhaust-induced cytotoxicity and proinflammatory mediator production in human airway epithelial cells.

    Science.gov (United States)

    Mullins, Benjamin J; Kicic, Anthony; Ling, Kak-Ming; Mead-Hunter, Ryan; Larcombe, Alexander N

    2016-01-01

    Increasing use of biodiesel has prompted research into the potential health effects of biodiesel exhaust exposure. Few studies directly compare the health consequences of mineral diesel, biodiesel, or blend exhaust exposures. Here, we exposed human epithelial cell cultures to diluted exhaust generated by the combustion of Australian ultralow-sulfur-diesel (ULSD), unprocessed canola oil, 100% canola biodiesel (B100), and a blend of 20% canola biodiesel mixed with 80% ULSD. The physicochemical characteristics of the exhaust were assessed and we compared cellular viability, apoptosis, and levels of interleukin (IL)-6, IL-8, and Regulated on Activation, Normal T cell Expressed and Secreted (RANTES) in exposed cultured cells. Different fuel types produced significantly different amounts of exhaust gases and different particle characteristics. All exposures resulted in significant apoptosis and loss of viability when compared with control, with an increasing proportion of biodiesel being correlated with a decrease in viability. In most cases, exposure to exhaust resulted in an increase in mediator production, with the greatest increases most often in response to B100. Exposure to pure canola oil (PCO) exhaust did not increase mediator production, but resulted in a significant decrease in IL-8 and RANTES in some cases. Our results show that canola biodiesel exhaust exposure elicits inflammation and reduces viability of human epithelial cell cultures in vitro when compared with ULSD exhaust exposure. This may be related to an increase in particle surface area and number in B100 exhaust when compared with ULSD exhaust. Exposure to PCO exhaust elicited the greatest loss of cellular viability, but virtually no inflammatory response, likely due to an overall increase in average particle size.

  17. Temperature influence on biodiesel production by non-catalytic transesterification; Influencia da temperatura na producao de biodiesel por transesterificacao nao catalitica

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Humberto N.M.; Oliveira, Thomas R.; Sousa, Elisa M.B.D. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    The main objective of this paper is to produce biodiesel using supercritical fluids through of the transesterification process without use of catalysts. It become easier the separation of the reaction products when compared with conventional method. In this work the influence of the temperature in the production of biodiesel from mamona oil was studied. Tree temperatures were studied (473.15 K, 523.15 K and 573.15 K) and the pressure (300 bar) and molar ratio (1:40) was keep constant during the process. Excess of Alcohol was used for this synthesis. The influence of temperature on the conversion and the reaction time was evaluated. The castor bean oil and biodiesel obtained were characterized in relation to their properties more significant. For results, higher conversions were found at higher temperatures (573.15 K), however can see a trend to the stability of reaction. The quality of the product was suitable for most properties evaluated. The equipment designed and built for this purpose was feasible but require some modifications to its optimization. The reaction of biodiesel production was confirmed, even without the addition of catalyst. It was the need to use a large excess of alcohol in relation to oil on this route without catalytic converters. In the case of the route of biodiesel production without the addition of catalysts, was felt the need to use excess alcohol in relation to the castor bean oil. (author)

  18. Monascus pigment production in bioreactor using a co-product of biodiesel as substrate

    Directory of Open Access Journals (Sweden)

    Rose Marie Meinicke Bühler

    2013-02-01

    Full Text Available The study and use of natural pigments in food industries have increased in recent years due to the toxicity presented by artificial pigments. Monascus ruber is a filamentous fungus that produces red, orange, and yellow pigments under different growing conditions. The growth of health food market has increased in parallel with the growth in biofuels production, such as biodiesel, which generates a concomitant increase in the production of glycerin that can be used in bioprocesses. The objective of this study was to use glycerin and glucose as substrates in the production of natural pigments in a bioreactor. The culture of Monascus ruber was carried out in a Bioflo III reactor with 4 L of working volume and pH, temperature, aeration, and agitation control. The highest pigment production was observed after 60 hours of fungal culture with 8.28 UA510 of red pigment. The pH range remained from 5.45 to 6.23 favoring the release of red pigment in the medium. This study shows the feasibility of the production of natural pigments by Monascus ruber in a bioreactor using a co-product of biodiesel without previous treatment as a substrate.

  19. Lipid yield and composition of Azolla filiculoides and the implications for biodiesel production

    NARCIS (Netherlands)

    Brouwer, Paul; van der Werf, Adrie; Schluepmann, Henriette; Reichart, Gert Jan; Nierop, Klaas G J

    2016-01-01

    The aquatic fern Azolla is one of the fastest-growing nitrogen-fixing plants on Earth and therefore considered as a potential source of biomass for bioenergy production. The lipid fraction from Azolla filiculoides was analyzed to investigate whether it suited biodiesel production. Since the producti

  20. Lipid Yield and Composition of Azolla filiculoides and the Implications for Biodiesel Production

    NARCIS (Netherlands)

    Brouwer, Paul; Werf, van der Adrie; Schluepmann, Henriette; Reichart, Gert Jan; Nierop, Klaas G.J.

    2016-01-01

    The aquatic fern Azolla is one of the fastest-growing nitrogen-fixing plants on Earth and therefore considered as a potential source of biomass for bioenergy production. The lipid fraction from Azolla filiculoides was analyzed to investigate whether it suited biodiesel production. Since the produ

  1. Kinetic model of biodiesel production using immobilized lipase Candida antarctica lipase B

    DEFF Research Database (Denmark)

    Fedosov, Sergey; Brask, Jesper; Pedersen, Anders K.;

    2013-01-01

    We have designed a kinetic model of biodiesel production using Novozym 435 (Nz435) with immobilized Candida antarctica lipase B (CALB) as a catalyst. The scheme assumed reversibility of all reaction steps and imitated phase effects by introducing various molecular species of water and methanol....... Residual enzymatic activity in biodiesel of standard quality causes increase of D above its specification level because of the reaction 2M↔D+G. Filtration or alkaline treatment of the product prior to storage resolves this problem. The optimal field of Nz435 application appears to be decrease of F, M, D...

  2. Recent developments in microbial oils production: a possible alternative to vegetable oils for biodiesel without competition with human food?

    Directory of Open Access Journals (Sweden)

    Gwendoline Christophe

    2012-02-01

    Full Text Available Since centuries vegetable oils are consumed as human food but it also finds applications in biodiesel production which is attracting more attention. But due to being in competition with food it could not be sustainable and leads the need to search for alternative. Nowdays microbes-derived oils (single cell oils seem to be alternatives for biodiesel production due to their similar composition to that of vegetable oils. However, the cold flow properties of the biodiesel produced from microbial oils are unacceptable and have to be modified by an efficient transesterification. Glycerol which is by product of transesterification can be valorised into some more useful products so that it can also be utilised along with biodiesel to simplify the downstream processing. The review paper discusses about various potent microorganisms for biodiesel production, enzymes involved in the lipid accumulation, lipid quantification methods, catalysts used in transesterification (including enzymatic catalyst and valorisation of glycerol.

  3. Biodiesel production using fatty acids from food industry waste using corona discharge plasma technology.

    Science.gov (United States)

    Cubas, A L V; Machado, M M; Pinto, C R S C; Moecke, E H S; Dutra, A R A

    2016-01-01

    This article aims to describe an alternative and innovative methodology to transform waste, frying oil in a potential energy source, the biodiesel. The biodiesel was produced from fatty acids, using a waste product of the food industry as the raw material. The methodology to be described is the corona discharge plasma technology, which offers advantages such as acceleration of the esterification reaction, easy separation of the biodiesel and the elimination of waste generation. The best conditions were found to be an oil/methanol molar ratio of 6:1, ambient temperature (25 °C) and reaction time of 110 min and 30 mL of sample. The acid value indicates the content of free fatty acids in the biodiesel and the value obtained in this study was 0.43 mg KOH/g. Peaks corresponding to octadecadienoic acid methyl ester, octadecanoic acid methyl ester and octadecenoic acid methyl ester, from the biodiesel composition, were identified using GC-MS. A major advantage of this process is that the methyl ester can be obtained in the absence of chemical catalysts and without the formation of the co-product (glycerin).

  4. Production, optimization and quality assessment of biodiesel from Ricinus communis L. oil

    Directory of Open Access Journals (Sweden)

    Maryam Ijaz

    2016-04-01

    Full Text Available At present, biodiesel is gaining tremendous attention due to its eco-friendly nature and is possible substitute for diesel fuel. Biodiesel as renewable energy source can be produced from edible and non-edible feedstock. Non-edible resources are preferred to circumvent for food competition. In the present study FAME was produced from Ricinus communis L. oil by transesterification with methanol and ethanol in the presence of potassium hydroxide. The practical optimal condition for the production of biodiesel from castor bean was found to be: methanol/oil molar ratio, 6:1; temperature, 60 °C; time, 45 min; catalyst concentration 0.32 g. Quality assessment of biodiesel showed comparable results with ASTM standards. The values of specific gravity (SG were 0.5, kinematic viscosity 2.45 cSt, acid values 0.13 mg KOH/g, carbon residue 0.03%, flash point 119 °C, fire point 125 °C, cloud point −10 °C and pour point −20 °C of Ricinus FAME, respectively. Based on our data, it is suggested that to overcome prevailing energy crisis this non-edible plant is useful for production of biodiesel, which is an alternate to fossil fuel and may be used alone or in blend with HSD in engine combustion.

  5. Biodiesel production using fatty acids from food industry waste using corona discharge plasma technology.

    Science.gov (United States)

    Cubas, A L V; Machado, M M; Pinto, C R S C; Moecke, E H S; Dutra, A R A

    2016-01-01

    This article aims to describe an alternative and innovative methodology to transform waste, frying oil in a potential energy source, the biodiesel. The biodiesel was produced from fatty acids, using a waste product of the food industry as the raw material. The methodology to be described is the corona discharge plasma technology, which offers advantages such as acceleration of the esterification reaction, easy separation of the biodiesel and the elimination of waste generation. The best conditions were found to be an oil/methanol molar ratio of 6:1, ambient temperature (25 °C) and reaction time of 110 min and 30 mL of sample. The acid value indicates the content of free fatty acids in the biodiesel and the value obtained in this study was 0.43 mg KOH/g. Peaks corresponding to octadecadienoic acid methyl ester, octadecanoic acid methyl ester and octadecenoic acid methyl ester, from the biodiesel composition, were identified using GC-MS. A major advantage of this process is that the methyl ester can be obtained in the absence of chemical catalysts and without the formation of the co-product (glycerin). PMID:26159043

  6. Pilot-scale production of biodiesel from waste fats and oils using tetramethylammonium hydroxide.

    Science.gov (United States)

    Šánek, Lubomír; Pecha, Jiří; Kolomazník, Karel; Bařinová, Michaela

    2016-02-01

    Annually, a great amount of waste fats and oils not suitable for human consumption or which cannot be further treated are produced around the world. A potential way of utilizing this low-cost feedstock is its conversion into biodiesel. The majority of biodiesel production processes today are based on the utilization of inorganic alkali catalysts. However, it has been proved that an organic base - tetramethylammonium hydroxide - can be used as a very efficient transesterification catalyst. Furthermore, it can be employed for the esterification of free fatty acids - reducing even high free fatty acid contents to the required level in just one step. The work presented herein, is focused on biodiesel production from waste frying oils and animal fats using tetramethylammonium hydroxide at the pilot-plant level. The results showed that the process performance in the pilot unit - using methanol and TMAH as a catalyst, is comparable to the laboratory procedure, even when the biodiesel is produced from waste vegetable oils or animal fats with high free fatty acid content. The reaction conditions were set at: 1.5% w/w of TMAH, reaction temperature 65°C, the feedstock to methanol molar ratio to 1:6, and the reaction time to 120min. The conversion of triglycerides to FAME was approximately 98%. The cloud point of the biodiesel obtained from waste animal fat was also determined. PMID:26459188

  7. Optimization of factors affecting the production of biodiesel from crude palm kernel oil and ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Kuwornoo, David. K. [Faculty of Chemical and Materials Engineering, Kwame Nkrumah University of Science and Technology (KNUST), Private Mail Bag, Kumasi (Ghana); Ahiekpor, Julius C. [Chemical Engineering Department, Kumasi Polytechnic, P.O. Box 854, Kumasi (Ghana)

    2010-07-01

    Biodiesel, an alternative diesel fuel made from renewable sources such as vegetable oils and animal fats, has been identified by government to play a key role in the socio-economic development of Ghana. The utilization of biodiesel is expected to be about 10% of the total liquid fuel mix of the country by the year 2020. Despite this great potential and the numerous sources from which biodiesel could be developed in Ghana, studies on the sources of biodiesel and their properties as a substitute for fossil diesel have tended to be limited to Jatropha oil. This paper, however, reports the parameters that influences the production of biodiesel from palm kernel oil, one of the vegetable oils obtained from oil palm which is the highest vegetable oil source in Ghana. The parameters studied are; mass ratio of ethanol to oil, reaction temperature, catalyst concentration, and reaction time using completely randomized 24 factorial design. Results indicated that ethanol to oil mass ratio, catalyst concentration and reaction time were the most important factors affecting the ethyl ester yield. There was also an interaction effect between catalyst and time and ethanol- oil ratio and time on the yield. Accordingly, the optimal conditions for the production of ethyl esters from crude palm kernel oil were determined as; 1:5 mass ratio of ethanol to oil, 1% catalyst concentration by weight of oil, 90 minutes reaction time at a temperature of 30 deg C.

  8. Pilot-scale production of biodiesel from waste fats and oils using tetramethylammonium hydroxide.

    Science.gov (United States)

    Šánek, Lubomír; Pecha, Jiří; Kolomazník, Karel; Bařinová, Michaela

    2016-02-01

    Annually, a great amount of waste fats and oils not suitable for human consumption or which cannot be further treated are produced around the world. A potential way of utilizing this low-cost feedstock is its conversion into biodiesel. The majority of biodiesel production processes today are based on the utilization of inorganic alkali catalysts. However, it has been proved that an organic base - tetramethylammonium hydroxide - can be used as a very efficient transesterification catalyst. Furthermore, it can be employed for the esterification of free fatty acids - reducing even high free fatty acid contents to the required level in just one step. The work presented herein, is focused on biodiesel production from waste frying oils and animal fats using tetramethylammonium hydroxide at the pilot-plant level. The results showed that the process performance in the pilot unit - using methanol and TMAH as a catalyst, is comparable to the laboratory procedure, even when the biodiesel is produced from waste vegetable oils or animal fats with high free fatty acid content. The reaction conditions were set at: 1.5% w/w of TMAH, reaction temperature 65°C, the feedstock to methanol molar ratio to 1:6, and the reaction time to 120min. The conversion of triglycerides to FAME was approximately 98%. The cloud point of the biodiesel obtained from waste animal fat was also determined.

  9. Physico-chemical characterization of biodiesel from pests attacked corn oil; Caracterizacao fisico-quimica do biodiesel de oleo de milho danificado por pragas

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Fabia M.; Correa, Paulo C.; Martins, Marcio A.; Santos, Silmara B.; Damian, Amanda D. [Universidade Federal de Vicosa (UFV), MG (Brazil)], Emails: copace@ufv.br, aredes@ufv.br, syllmara@vicosa.ufv.br

    2009-07-01

    The biodiesel is a renewable energy source alternative to fossil fuels. The biodiesel synthesis can be made by many types of triglycerides transesterification, it is possible to use this biofuel in vehicles if it has the quality required from Agencia Nacional de Petroleo, Gas Natural e Biocombustiveis (ANP). Searching an application for pests attacked corn, there is feasibility technical for the biodiesel production from this corn oil. The biodiesel synthesis was made through ethyl transesterification process with alkaline catalyst using ethanol. The biodiesel physical-chemical characterization was performed using ANP methods. (author)

  10. Thermal analysis on the process of microwave-assisted biodiesel production.

    Science.gov (United States)

    Wu, Li; Zhu, Huacheng; Huang, Kama

    2013-04-01

    The aim of this work was firstly to do a precise thermal analysis of microwave assisted production of biodiesel. In this paper, the effective permittivity of biodiesel synthesis was updated with two methods: a traditional method and a bivariate function of temperature and concentration of one component, then the thermal analysis of the reaction process were accomplished with multi-physics calculation. The results show that there exists large distinction in temperature between these two simulation results calculated by the two methods. The two hot spots locate in the opposite side and their temperature's difference is up to 9°C when the reaction is just carried out for 18s. But the temperature risings and distributions calculated by the new method are closer to the measured results. The thermal analysis based on the new method will be helpful for the industrial design of biodiesel production.

  11. Two-step supercritical dimethyl carbonate method for biodiesel production from Jatropha curcas oil.

    Science.gov (United States)

    Ilham, Zul; Saka, Shiro

    2010-04-01

    This study reports on a novel two-step process for biodiesel production consisting of hydrolysis of oils in sub-critical water and subsequent supercritical dimethyl carbonate esterification. This process found to occur optimally at the sub-critical water treatment (270 degrees Celsius/27 MPa) for 25 min followed by a subsequent supercritical dimethyl carbonate treatment (300 degrees Celsius/9 MPa) for 15 min to achieve a comparably high yield of fatty acid methyl esters, at more than 97 wt%. In addition, the fatty acid methyl esters being produced satisfied the international standard specifications for use as biodiesel fuel. This new process for biodiesel production offers milder reaction condition (lower temperature and lower pressure), non-acidic, non-catalytic and applicable to feedstock with high amount of free fatty acids such as crude Jatropha curcas oil. PMID:19932022

  12. Real-Time Model Based Process Monitoring of Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Nordblad, Mathias; Woodley, John;

    2015-01-01

    In this contribution we extend our modelling work on the enzymatic production of biodiesel where we demonstrate the application of a Continuous-Discrete Extended Kalman Filter (a state estimator). The state estimator is used to correct for mismatch between the process data and the process model...... for Fed-batch production of biodiesel. For the three process runs investigated, using a single tuning parameter, qx=2 x 10-2 which represents the uncertainty in the process model, it was possible over the entire course of the reaction to reduce the overall mean and standard deviation of the error between......, there was over a ten-fold decrease in the overall mean error for the state estimator prediction compared with the predictions from the pure model simulations. It is also shown that the state estimator can be used as a tool for detection of outliers in the measurement data. For the enzymatic biodiesel process...

  13. WSF Biodiesel Demonstration Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Washington State University; University of Idaho; The Glosten Associates, Inc.; Imperium Renewables, Inc.

    2009-04-30

    In 2004, WSF canceled a biodiesel fuel test because of “product quality issues” that caused the fuel purifiers to clog. The cancelation of this test and the poor results negatively impacted the use of biodiesel in marine application in the Pacific Northwest. In 2006, The U.S. Department of Energy awarded the Puget Sound Clean Air Agency a grant to manage a scientific study investigating appropriate fuel specifications for biodiesel, fuel handling procedures and to conduct a fuel test using biodiesel fuels in WSF operations. The Agency put together a project team comprised of experts in fields of biodiesel research and analysis, biodiesel production, marine engineering and WSF personnel. The team reviewed biodiesel technical papers, reviewed the 2004 fuel test results, designed a fuel test plan and provided technical assistance during the test. The research reviewed the available information on the 2004 fuel test and conducted mock laboratory experiments, but was not able to determine why the fuel filters clogged. The team then conducted a literature review and designed a fuel test plan. The team implemented a controlled introduction of biodiesel fuels to the test vessels while monitoring the environmental conditions on the vessels and checking fuel quality throughout the fuel distribution system. The fuel test was conducted on the same three vessels that participated in the canceled 2004 test using the same ferry routes. Each vessel used biodiesel produced from a different feedstock (i.e. soy, canola and yellow grease). The vessels all ran on ultra low sulfur diesel blended with biodiesel. The percentage of biodiesel was incrementally raised form from 5 to 20 percent. Once the vessels reached the 20 percent level, they continued at this blend ratio for the remainder of the test. Fuel samples were taken from the fuel manufacturer, during fueling operations and at several points onboard each vessel. WSF Engineers monitored the performance of the fuel systems and

  14. Production of Biodiesel from Oleaginous Organisms Using Underutilized Wastewaters

    OpenAIRE

    Godfrey, Valerie

    2012-01-01

    Driven by the rising costs, decreasing convenience, and increased demand of fossil fuels, the need for alternative, sustainable energy sources has caused a spark in interest in biomass-based fuels. Oleaginous organisms such as yeast, algae, and bacteria have been considered as microscopic biofactories for oils that can be converted into biodiesel. The process of growing such organisms using current technology requires an alarming amount of freshwater, which is another resource of growing conc...

  15. Experimental Protocol for Biodiesel Production with Isolation of Alkenones as Coproducts from Commercial Isochrysis Algal Biomass.

    Science.gov (United States)

    O'Neil, Gregory W; Williams, John R; Wilson-Peltier, Julia; Knothe, Gerhard; Reddy, Christopher M

    2016-06-24

    The need to replace petroleum fuels with alternatives from renewable and more environmentally sustainable sources is of growing importance. Biomass-derived biofuels have gained considerable attention in this regard, however first generation biofuels from edible crops like corn ethanol or soybean biodiesel have generally fallen out of favor. There is thus great interest in the development of methods for the production of liquid fuels from domestic and superior non-edible sources. Here we describe a detailed procedure for the production of a purified biodiesel from the marine microalgae Isochrysis. Additionally, a unique suite of lipids known as polyunsaturated long-chain alkenones are isolated in parallel as potentially valuable coproducts to offset the cost of biodiesel production. Multi-kilogram quantities of Isochrysis are purchased from two commercial sources, one as a wet paste (80% water) that is first dried prior to processing, and the other a dry milled powder (95% dry). Lipids are extracted with hexanes in a Soxhlet apparatus to produce an algal oil ("hexane algal oil") containing both traditional fats (i.e., triglycerides, 46-60% w/w) and alkenones (16-25% w/w). Saponification of the triglycerides in the algal oil allows for separation of the resulting free fatty acids (FFAs) from alkenone-containing neutral lipids. FFAs are then converted to biodiesel (i.e., fatty acid methyl esters, FAMEs) by acid-catalyzed esterification while alkenones are isolated and purified from the neutral lipids by crystallization. We demonstrate that biodiesel from both commercial Isochrysis biomasses have similar but not identical FAME profiles, characterized by elevated polyunsaturated fatty acid contents (approximately 40% w/w). Yields of biodiesel were consistently higher when starting from the Isochrysis wet paste (12% w/w vs. 7% w/w), which can be traced to lower amounts of hexane algal oil obtained from the powdered Isochrysis product.

  16. Integrated production of sugarcane ethanol and soybean biodiesel: Environmental and economic implications of fossil diesel displacement

    International Nuclear Information System (INIS)

    Highlights: • Sugarcane sector is responsible for around 4% of the diesel consumption in Brazil. • Soybean biodiesel can reduce the fossil diesel demand in the sugarcane sector. • The local use of biodiesel could reduce logistic problems and environmental burdens. • The sugarcane–soybean integration is likely to improve ethanol life cycle performance. • Fiscal incentives could reduce the economic uncertainties of the integration. - Abstract: The sugarcane industry in Brazil has been considered promising for the production of advanced fuels and bio-based products. However, the sugarcane crop requires high volumes of fossil fuel for cultivation and transport. The use of biodiesel as a diesel substitute could reduce the environmental burdens associated with this high consumption. This work performed a stochastic evaluation of the environmental and economic implications of the integrated production of sugarcane bioethanol and soybean biodiesel, in comparison with the traditional sugarcane-to-ethanol process. The analysis was focused on the states of Goiás, Mato Grosso and São Paulo, where this integration would be particularly attractive. The environmental aspects addressed were the fossil energy use and the GHG emissions in a cradle-to-gate approach. The economic analysis comprised the evaluation of the net present value of an incremental cash flow generated by the soybean production and by the adjacent plants of oil extraction and biodiesel. Results indicate that the integrated system is likely to improve the ethanol environmental performance, especially with regard to the fossil energy use. The integration is economically feasible but highly uncertain; however, it could be significantly improved through fiscal incentives to biodiesel producers, founded on the reduction of fossil energy use and on improvements in logistics. In addition, the proposed model may also assist in the design of other integrated systems applied to the sugarcane sector in Brazil

  17. Experimental Protocol for Biodiesel Production with Isolation of Alkenones as Coproducts from Commercial Isochrysis Algal Biomass

    Science.gov (United States)

    O'Neil, Gregory W.; Williams, John R.; Wilson-Peltier, Julia; Knothe, Gerhard; Reddy, Christopher M.

    2016-01-01

    The need to replace petroleum fuels with alternatives from renewable and more environmentally sustainable sources is of growing importance. Biomass-derived biofuels have gained considerable attention in this regard, however first generation biofuels from edible crops like corn ethanol or soybean biodiesel have generally fallen out of favor. There is thus great interest in the development of methods for the production of liquid fuels from domestic and superior non-edible sources. Here we describe a detailed procedure for the production of a purified biodiesel from the marine microalgae Isochrysis. Additionally, a unique suite of lipids known as polyunsaturated long-chain alkenones are isolated in parallel as potentially valuable coproducts to offset the cost of biodiesel production. Multi-kilogram quantities of Isochrysis are purchased from two commercial sources, one as a wet paste (80% water) that is first dried prior to processing, and the other a dry milled powder (95% dry). Lipids are extracted with hexanes in a Soxhlet apparatus to produce an algal oil ("hexane algal oil") containing both traditional fats (i.e., triglycerides, 46-60% w/w) and alkenones (16-25% w/w). Saponification of the triglycerides in the algal oil allows for separation of the resulting free fatty acids (FFAs) from alkenone-containing neutral lipids. FFAs are then converted to biodiesel (i.e., fatty acid methyl esters, FAMEs) by acid-catalyzed esterification while alkenones are isolated and purified from the neutral lipids by crystallization. We demonstrate that biodiesel from both commercial Isochrysis biomasses have similar but not identical FAME profiles, characterized by elevated polyunsaturated fatty acid contents (approximately 40% w/w). Yields of biodiesel were consistently higher when starting from the Isochrysis wet paste (12% w/w vs. 7% w/w), which can be traced to lower amounts of hexane algal oil obtained from the powdered Isochrysis product. PMID:27404113

  18. Experimental Protocol for Biodiesel Production with Isolation of Alkenones as Coproducts from Commercial Isochrysis Algal Biomass.

    Science.gov (United States)

    O'Neil, Gregory W; Williams, John R; Wilson-Peltier, Julia; Knothe, Gerhard; Reddy, Christopher M

    2016-01-01

    The need to replace petroleum fuels with alternatives from renewable and more environmentally sustainable sources is of growing importance. Biomass-derived biofuels have gained considerable attention in this regard, however first generation biofuels from edible crops like corn ethanol or soybean biodiesel have generally fallen out of favor. There is thus great interest in the development of methods for the production of liquid fuels from domestic and superior non-edible sources. Here we describe a detailed procedure for the production of a purified biodiesel from the marine microalgae Isochrysis. Additionally, a unique suite of lipids known as polyunsaturated long-chain alkenones are isolated in parallel as potentially valuable coproducts to offset the cost of biodiesel production. Multi-kilogram quantities of Isochrysis are purchased from two commercial sources, one as a wet paste (80% water) that is first dried prior to processing, and the other a dry milled powder (95% dry). Lipids are extracted with hexanes in a Soxhlet apparatus to produce an algal oil ("hexane algal oil") containing both traditional fats (i.e., triglycerides, 46-60% w/w) and alkenones (16-25% w/w). Saponification of the triglycerides in the algal oil allows for separation of the resulting free fatty acids (FFAs) from alkenone-containing neutral lipids. FFAs are then converted to biodiesel (i.e., fatty acid methyl esters, FAMEs) by acid-catalyzed esterification while alkenones are isolated and purified from the neutral lipids by crystallization. We demonstrate that biodiesel from both commercial Isochrysis biomasses have similar but not identical FAME profiles, characterized by elevated polyunsaturated fatty acid contents (approximately 40% w/w). Yields of biodiesel were consistently higher when starting from the Isochrysis wet paste (12% w/w vs. 7% w/w), which can be traced to lower amounts of hexane algal oil obtained from the powdered Isochrysis product. PMID:27404113

  19. Optimization of biodiesel production process using recycled vegetable oil

    Science.gov (United States)

    Lugo, Yarely

    Petro diesel toxic emissions and its limited resources have created an interest for the development of new energy resources, such as biodiesel. Biodiesel is traditionally produced by a transesterification reaction between vegetable oil and an alcohol in the presence of a catalyst. However, this process is slow and expensive due to the high cost of raw materials. Low costs feedstock oils such as recycled and animal fats are available but they cannot be transesterified with alkaline catalysts due to high content of free fatty acids, which can lead to undesirable reactions such as saponification. In this study, we reduce free fatty acids content by using an acid pre-treatment. We compare sulfuric acid, hydrochloric acid and ptoluenesulfonic acid (PTSA) to pre-treat recycled vegetable oil. PTSA removes water after 60 minutes of treatment at room temperature or within 15 minutes at 50°C. The pretreatment was followed by a transesterification reaction using alkaline catalyst. To minimize costs and accelerate reaction, the pretreatment and transesterification reaction of recycle vegetable oil was conducted at atmospheric pressure in a microwave oven. Biodiesel was characterized using a GC-MS method.

  20. Heterogeneous catalyzed biodiesel production from Moringa oleifera oil

    Energy Technology Data Exchange (ETDEWEB)

    Kafuku, Gerald; Mbarawa, Makame [Department of Mechanical Engineering, Tshwane University of Technology, Private Bag X680, Pretoria 001 (South Africa); Lam, Man Kee; Kansedo, Jibrail; Lee, Keat Teong [School of Chemical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang (Malaysia)

    2010-11-15

    In this study, biodiesel was produced from Moringa oleifera oil using sulfated tin oxide enhanced with SiO{sub 2} (SO{sub 4}{sup 2-}/SnO{sub 2}-SiO{sub 2}) as super acid solid catalyst. The experimental design was done using design of experiment (DoE), specifically, response surface methodology based on three-variable central composite design (CCD) with alpha ({alpha}) = 2. The reaction parameters studied were reaction temperature (60 C to 180 C), reaction period (1 h to 3 h) and methanol to oil ratio (1:6 to 1:24). It was observed that the yield up to 84 wt.% of Moringa oleifera methyl esters can be obtained with reaction conditions of 150 C temperature, 150 min reaction time and 1:19.5 methanol to oil ratio, while catalyst concentration and agitation speed are kept at 3 wt.% and 350-360 rpm respectively. Therefore this study presents the possibility of converting a relatively new oil feedstock, Moringa oleifera oil to biodiesel and thus reducing the world's dependency on existing edible oil as biodiesel feedstock. (author)

  1. Hura crepitans Seed Oil: An Alternative Feedstock for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Adewale Adewuyi

    2014-01-01

    Full Text Available Oil was extracted from the seed of Hura crepitans using hexane in a soxhlet extractor and analyzed for iodine value, saponification value and free fatty acid content. The dominant fatty acid in the oil was C18:2 (52.8±0.10% while the iodine value was 120.10±0.70 g iodine/100 g. Biodiesel was produced from the oil using a two-step reaction system involving a first step of pretreatment via esterification reaction and a second step via transesterification reaction. The pretreatment step showed that free fatty acid in Hura crepitans seed oil can be reduced in a one-step pretreatment of esterification using H2SO4 as catalyst. The biodiesel produced from Hura crepitans seed oil had an acid value of 0.21±0.00 mg KOH/g, flash point of 152 ± 1.10°C, copper strip corrosion value of 1A, calorific value of 39.10±0.30 mJ/kg, cetane number of 45.62±0.30, and density of 0.86±0.02 g cm−3. The process gave a biodiesel yield of 98.70±0.40% with properties within the recommended values of EN 14214.

  2. Life cycle assessment of the transesterification double step process for biodiesel production from refined soybean oil in Brazil.

    Science.gov (United States)

    Carvalho, Monica; da Silva, Elson Santos; Andersen, Silvia L F; Abrahão, Raphael

    2016-06-01

    Biodiesel has been attracting considerable attention as being a renewable, biodegradable, and nontoxic fuel that can contribute to the solution of some energy issues as it presents potential to help mitigate climate change. The Life Cycle Assessment of biodiesel from soybean oil (transesterification double step process) was carried out herein. A pilot plant was considered, designed to produce 72 L of biodiesel in daily continuous flow, throughout a lifetime of 15 years (8000 annual hours). The materials and equipment utilized in the construction of the plant were considered as well as the energy and substances required for the production of biodiesel. Environmental impact assessment method IPCC 2013 GWP 100a was utilized within the SimaPro software to express the final result in kg CO2-equivalent. The results quantified the CO2 emissions associated with biodiesel production throughout the lifetime of the production plant (15 years), resulting in a total value of 1,441,426.05 kg CO2-eq. (96,095.07 kg CO2-eq. per year), which was equivalent to 4.01 kg CO2-eq. per liter of biodiesel produced. Decrease of environmental loads associated with the production of biodiesel could include improvements on the handling of biomass agriculture and on the technology production of biodiesel. PMID:26903132

  3. Life cycle assessment of the transesterification double step process for biodiesel production from refined soybean oil in Brazil.

    Science.gov (United States)

    Carvalho, Monica; da Silva, Elson Santos; Andersen, Silvia L F; Abrahão, Raphael

    2016-06-01

    Biodiesel has been attracting considerable attention as being a renewable, biodegradable, and nontoxic fuel that can contribute to the solution of some energy issues as it presents potential to help mitigate climate change. The Life Cycle Assessment of biodiesel from soybean oil (transesterification double step process) was carried out herein. A pilot plant was considered, designed to produce 72 L of biodiesel in daily continuous flow, throughout a lifetime of 15 years (8000 annual hours). The materials and equipment utilized in the construction of the plant were considered as well as the energy and substances required for the production of biodiesel. Environmental impact assessment method IPCC 2013 GWP 100a was utilized within the SimaPro software to express the final result in kg CO2-equivalent. The results quantified the CO2 emissions associated with biodiesel production throughout the lifetime of the production plant (15 years), resulting in a total value of 1,441,426.05 kg CO2-eq. (96,095.07 kg CO2-eq. per year), which was equivalent to 4.01 kg CO2-eq. per liter of biodiesel produced. Decrease of environmental loads associated with the production of biodiesel could include improvements on the handling of biomass agriculture and on the technology production of biodiesel.

  4. Impacts of production and use of biodiesel of the Sergipe state, Brazil; Impactos da producao e uso de biodiesel no estado de Sergipe

    Energy Technology Data Exchange (ETDEWEB)

    Vital Brazil, Osiris Ashton; Silva, Maria Susana; Souza, Angela Maria de [Sergipe Parque Tecnologico (SergipeTec), Aracaju, SE (Brazil); Vaz, Vitor Hugo Silva [Faculdade Sao Luis de Franca, Aracaju, SE (Brazil)

    2008-07-01

    The law 11.097/05, establishes that from January 2008 is binding the mixture of 2% biodiesel in diesel (B2) and the same law provides that in 2013 makes it mandatory to blend diesel with 5% biodiesel (B5). This article is motivated by actions that have been developed in the state of Sergipe for the production and use of biodiesel as established by law. The objective of the article is to discuss the impacts of the production and use of biodiesel in Sergipe, specifically seeks to examine the economic impacts in agricultural production and energy matrix state. The discussion of the impacts of biodiesel in the state of Sergipe, is dealt with in this Arctic addresses the demand for oil for the state to become high enough to B2 and B5 in the coming years, the impact of this oil in the energy matrix of the state. This initial discussion projected targets of protection both for agriculture and for the Industrialization of the state. (author)

  5. Production of Biodiesel from Marine Algae to Mitigate Environmental Pollution

    International Nuclear Information System (INIS)

    This research article demonstrates the conversion of oily contents of marine macroalgae, namely Cystoseira indica and Scinia hatei to fatty acid methyl ester (FAME) through alkaline transesterification. The algae were dried, crushed and grinded into the powder form, which were analyzed for physical appearance, water content and particle size profile. The oily contents from these powdered algae were extracted by using different non-polar solvents like n-hexane, n-heptane, dichloromethane, diethyl ether and n-hexane: diethyl ether (1:1) mixture at small scale. The efficiency index of the solvent was developed based on the yield of the oily content and boiling point of these solvents, which showed that n-hexane: diethyl ether (1:1) mixture is the best solvent system for the extraction of oils. The yield of oily contents with respect to the dried algal weight was found to be 2.81 ± 0.43 percentage w/w and 3.10 ± 0.27 percentage w/w for C. indica and S. hatei respectively. These oily contents were subjected to physical and chemical analysis. The oily contents were converted into biodiesel by alkaline transesterification using potassium methoxide as catalyst which is prepared by dissolving KOH in methanol (0.5g/12 ml, 4.2 percentage w/v) in a separate flask. All the reactions were carried out under completely anhydrous conditions using silica as desiccant and with continuous stirring so that the reactants in two immiscible phases of oily contents and methanol were remain in contact. The yield of biodiesel was found to be 89.0 ± 0.51 percentage w/w (2.50 percentage w/w of dried alga) and 90.6 ± 0.36 percentage w/w (2.81 percentage w/w of dried alga) of biodiesel from C. indica and S. hatei respectively. Finally, biodiesel was characterized by gas chromatography and American Society for Testing and Materials (ASTM) as well as by European (EN) standards which were found to be in agreement with the standard values of biodiesel. (author)

  6. Evaluation of the biodiesel production using three sources of raw material and ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Radecki, Angela Patricia; Fracaro, Cristiane; Gnoatto, Estor; Kavanagh, Edward; Anami, Marcelo Hidemassa; Fischborn, Marcos; Lobo, Viviane da Silva [Universidade Tecnologica Federal do Parana (UTFPR), Medianeira, PR (Brazil)], E-mail: mhanami@utfpr.edu.br; Zara, Ricardo Fiori [Prati Donaduzzi e Cia. Ltda., Toledo, PR (Brazil)

    2008-07-01

    The conversion of different oils in ethyl ester (biodiesel) through the transesterification with anhydrous ethanol, together with its quality and its consumption in mixture with diesel of petroleum in different ratios, they were evaluated using a stationary diesel engine connected to an electric energy generator. The raw materials used in this transformation were oil of refined soybean, oil of refined sunflower and animal fat (swine). In the transesterification reaction it was used an alkaline catalyst (sodium hydroxide), because of its proven effectiveness and the high speed facing other catalyst, beyond being less corrosive and demands less molar' reasons between the alcohol and the vegetal oil. The tests in stationary diesel engine were carried through the dilutions of 0%, 5%, 10%, 15% and 20% of biodiesel produced in mixture with diesel of petroleum. The results showed that the yield of biodiesel gotten by different sources is satisfactory. It was also observed that the basic catalysis is adjusted to the production of biodiesel from raw materials with low acidity. The tests in diesel engine appeared to be sufficiently satisfactory once it was not observed any alteration in the functioning of the engine. The consumption was also not modified by the studied dilutions, demonstrating that the biodiesel can be added to the pure diesel reducing the use of the fuel derived from petroleum. (author)

  7. Biodiesel production process intensification using a rotor-stator type generator of hydrodynamic cavitation.

    Science.gov (United States)

    Crudo, Daniele; Bosco, Valentina; Cavaglià, Giuliano; Grillo, Giorgio; Mantegna, Stefano; Cravotto, Giancarlo

    2016-11-01

    Triglyceride transesterification for biodiesel production is a model reaction which is used to compare the conversion efficiency, yield, reaction time, energy consumption, scalability and cost estimation of different reactor technology and energy source. This work describes an efficient, fast and cost-effective procedure for biodiesel preparation using a rotating generator of hydrodynamic cavitation (HC). The base-catalyzed transesterification (methanol/sodium hydroxide) has been carried out using refined and bleached palm oil and waste vegetable cooking oil. The novel HC unit is a continuous rotor-stator type reactor in which reagents are directly fed into the controlled cavitation chamber. The high-speed rotation of the reactor creates micron-sized droplets of the immiscible reacting mixture leading to outstanding mass and heat transfer and enhancing the kinetics of the transesterification reaction which completes much more quickly than traditional methods. All the biodiesel samples obtained respect the ASTM standard and present fatty acid methyl ester contents of >99% m/m in both feedstocks. The electrical energy consumption of the HC reactor is 0.030kWh per L of produced crude biodiesel, making this innovative technology really quite competitive. The reactor can be easily scaled-up, from producing a few hundred to thousands of liters of biodiesel per hour while avoiding the risk of orifices clogging with oil impurities, which may occur in conventional HC reactors. Furthermore it requires minimal installation space due to its compact design, which enhances overall security.

  8. Production of biodiesel from Jatropha oil catalyzed by nanosized solid basic catalyst

    International Nuclear Information System (INIS)

    In this work, hydrotalcite-derived particles with Mg/Al molar ratio of 3/1 were synthesized by a coprecipitation method using urea as precipitating agent, subsequently with (MHT) microwave-hydrothermal treatment, and followed by calcination at 773 K for 6 h. These particles were micro-sized mixed Mg/Al oxides as characterized by SEM and AFM. But actually they were nanosized according to the calculations from XRD data. Because of their strong basicity, the nanoparticles were further used as catalyst for biodiesel production from Jatropha oil after pretreatment. Experiments were conducted with the solid basic catalyst in an ultrasonic reactor under different conditions. At the optimized condition, biodiesel yield of 95.2% was achieved, and the biodiesel properties were close to those of the German standard. The catalyst can be reused for 8 times. -- Research highlights: → Nanosized base Mg-Al calcined hydrotalcite catalyst was synthesized. → The catalyst was successfully used to produce high qualified biodiesel from Jatropha oil under ultrasonic radiation. → Maximum biodiesel yield of 95.2% was achieved at optimized condition. → The catalyst can be reused for 8 times.

  9. High-purity biodiesel production from microalgae and added-value lipid extraction: a new process.

    Science.gov (United States)

    Veillette, M; Giroir-Fendler, A; Faucheux, N; Heitz, M

    2015-01-01

    A new process was tested in order to produce and purify biodiesel from microalgae lipids and to recover unsaponifiable (added-value) lipids. This process is a two-step biodiesel production including a saponification reaction step followed by an esterification reaction step. The process includes a recovery of the unsaponified lipids between both reaction steps. Among the conditions tested, the following conditions were found to be the best: temperature for both steps (90 °C), saponification time (30 min), esterification time (30 min), sulfuric acid/potassium hydroxide (1.21, w/w), and methanol-lipid ratio (13.3 mL/g). Under these conditions, the fatty acid methyl ester (FAME) yield and the biodiesel purity were, respectively, 32% (g FAME/g lipid) and 77% (g FAME/g biodiesel). This study also showed that the two-step biodiesel process allows a FAME mass composition rich in palmitate (27.9-29.4 wt%), palmitoleate (24.9-26.0 wt%), elaidate (14.8-15.2 wt%), and myristate (12.1-13.0 wt%).

  10. Biodiesel production process intensification using a rotor-stator type generator of hydrodynamic cavitation.

    Science.gov (United States)

    Crudo, Daniele; Bosco, Valentina; Cavaglià, Giuliano; Grillo, Giorgio; Mantegna, Stefano; Cravotto, Giancarlo

    2016-11-01

    Triglyceride transesterification for biodiesel production is a model reaction which is used to compare the conversion efficiency, yield, reaction time, energy consumption, scalability and cost estimation of different reactor technology and energy source. This work describes an efficient, fast and cost-effective procedure for biodiesel preparation using a rotating generator of hydrodynamic cavitation (HC). The base-catalyzed transesterification (methanol/sodium hydroxide) has been carried out using refined and bleached palm oil and waste vegetable cooking oil. The novel HC unit is a continuous rotor-stator type reactor in which reagents are directly fed into the controlled cavitation chamber. The high-speed rotation of the reactor creates micron-sized droplets of the immiscible reacting mixture leading to outstanding mass and heat transfer and enhancing the kinetics of the transesterification reaction which completes much more quickly than traditional methods. All the biodiesel samples obtained respect the ASTM standard and present fatty acid methyl ester contents of >99% m/m in both feedstocks. The electrical energy consumption of the HC reactor is 0.030kWh per L of produced crude biodiesel, making this innovative technology really quite competitive. The reactor can be easily scaled-up, from producing a few hundred to thousands of liters of biodiesel per hour while avoiding the risk of orifices clogging with oil impurities, which may occur in conventional HC reactors. Furthermore it requires minimal installation space due to its compact design, which enhances overall security. PMID:27245973

  11. Biodiesel production from waste cotton seed oil using low cost catalyst: Engine performance and emission characteristics

    Directory of Open Access Journals (Sweden)

    Duple Sinha

    2016-09-01

    Full Text Available Production of fatty acid methyl esters from waste cotton seed oil through transesterification was reported. The GC–MS analysis of WCCO oil was studied and the major fatty acids were found to be palmitic acid (27.76% and linoleic acid (42.84%. The molecular weight of the oil was 881.039 g/mol. A maximum yield of 92% biodiesel was reported when the reaction temperature, time, methanol/oil ratio and catalyst loading rate were 60 °C, 50 min, 12:1 and 3% (wt.%, respectively. The calcined egg shell catalyst was prepared and characterized. Partial purification of the fatty acid methyl esters was proposed for increasing the purity of the biodiesel and better engine performance. The flash point and the fire point of the biodiesel were found to be 128 °C and 136 °C, respectively. The Brake thermal efficiency of WCCO B10 biodiesel was 26.04% for maximum load, specific fuel consumption for diesel was 0.32 kg/kW h at maximum load. The use of biodiesel blends showed a reduction of carbon monoxide and hydrocarbon emissions and a marginal increase in nitrogen oxides (NOx emissions improved emission characteristics.

  12. Family farmers and biodiesel production: Systems thinking and multi-level decisions in Northern Minas Gerais, Brazil.

    NARCIS (Netherlands)

    Florin, M.J.; Ven, van de G.W.J.; Ittersum, van M.K.

    2013-01-01

    This study focuses on family farmer engagement in the Brazilian national programme for Production and use of Biodiesel (PNPB). The Brazilian government has been promoting the role of family farmers as producers of biomass for biodiesel since 2004; however, fewer than expected family farmers have dec

  13. Economic and environmental performance of oilseed cropping systems for biodiesel production : existing cultivation practices in the European Union

    NARCIS (Netherlands)

    Conijn, J.G.; Corre, W.J.; Ruijter, de F.J.

    2011-01-01

    The Ecodiesel project aims at a drastic improvement of the GHG emission of current biodiesel production in the EU. If the biodiesel is produced from crops, the way the crop is cultivated at the farm is very important because calculations have shown that the emission from crop cultivation have a larg

  14. Optimal Design of Biodiesel Production Process from Waste Cooking Palm Oil

    DEFF Research Database (Denmark)

    Simasatitkul, Lida; Gani, Rafiqul; Arpornwichanop, Amornchai;

    2012-01-01

    process. A two-step approach of hydrolysis and esterification processes is also considered. Waste cooking palm oil consists of a mixture of triglyceride (e.g., trilaurin, tripalmitin, triolein, tristearin, trilinolein and trilinolenin) and free fatty acids (e.g., lauric acid, palmitic acid, stearic acid......A design methodology for biodiesel production from waste cooking palm oil is proposed. The proposed method is flexible to the biodiesel process using various catalyst types: alkali and acid catalyst in homogenous and heterogeneous forms, and different process: enzyme process and supercritical...

  15. Biodiesel production through in situ transesterification of sunflower seeds by homogeneous and heterogeneous catalysis

    International Nuclear Information System (INIS)

    The objective of this work is to show the results of the in situ transesterification of sunflower seed oil with methanol on basic homogeneous and heterogeneous catalysis for the production of biodiesel. In homogeneous catalysis, the activity of KOH and K2CO3 were evaluated using the same oil:methanol ratio of 1:90. KOH showed to be more active than K2CO3, leading to total conversion in biodiesel after 1h reaction time. In the heterogeneous catalysis the activity of K2CO3/Al2O3 was comparable to the activity of K2CO3 bulk: 53.0 and 66.6% resp. The properties of samples of biodiesel produced by homogeneous and heterogeneous catalysis were evaluated and are in accordance with the recommended fuel properties. (author)

  16. Life cycle assessment of biodiesel production from algal bio-crude oils extracted under subcritical water conditions.

    Science.gov (United States)

    Ponnusamy, Sundaravadivelnathan; Reddy, Harvind Kumar; Muppaneni, Tapaswy; Downes, Cara Meghan; Deng, Shuguang

    2014-10-01

    A life cycle assessment study is performed for the energy requirements and greenhouse gas emissions in an algal biodiesel production system. Subcritical water (SCW) extraction was applied for extracting bio-crude oil from algae, and conventional transesterification method was used for converting the algal oil to biodiesel. 58MJ of energy is required to produce 1kg of biodiesel without any co-products management, of which 36% was spent on cultivation and 56% on lipid extraction. SCW extraction with thermal energy recovery reduces the energy consumption by 3-5 folds when compared to the traditional solvent extraction. It is estimated that 1kg of algal biodiesel fixes about 0.6kg of CO2. An optimized case considering the energy credits from co-products could further reduce the total energy demand. The energy demand for producing 1kg of biodiesel in the optimized case is 28.23MJ.

  17. Karanja (Pongamia Pinnata) biodiesel production in Bangladesh, characterization of karanja biodiesel and its effect on diesel emissions

    Energy Technology Data Exchange (ETDEWEB)

    Nabi, Md. Nurun; Hoque, S.M. Najmul; Akhter, Md. Shamim [Department of Mechanical Engineering, RUET (Bangladesh)

    2009-09-15

    This paper presents production of biodiesel (BD) from non-edible renewable karanja (Pongamia Pinnata) oil, determination of BD properties and influence of BD on engine performance and emissions. Bangladesh imports 2.4 million metric ton (MT) DF each year [M.N. Nabi, M.S. Akhter, K.M.F. Islam, Prospect of biodiesel production from jatropha curcas, a promising non edible oil seed in Bangladesh, International Conference on Mechanical Engineering (ICME, Dhaka, Bangladesh) Proceedings 2007, paper no. ICME07-TH-06. ]. It has 0.32 million hectare of unused land [M.N. Nabi, S.M.N. Hoque, M.S. Uddin, Prospect of Jatropha curcas and pithraj cultivation in Bangladesh, Journal of Engineering and Technology, IUT, Dhaka, Bangladesh, 7 (1) (2009) 41-54. ]. It has been found that cultivating of karanja plant in such unused land; Bangladesh can reduce DF import by 28%. Karanja methyl ester (KME), which is termed as BD, has been produced by well-known transesterification process. The properties of B100 (B100) and its blends were determined mainly according to ASTM standard and some of them were as per EN14214 standard. The Fourier transform infrared (FTIR) analysis showed that the DF fuel contained mainly alkanes and alkens, while the B100 contained mainly esters. The gas chromatography (GC) of B100 revealed that a maximum of 97% methyl ester was produced from karanja oil. Engine experiment result showed that all BD blends reduced engine emissions including carbon monoxide (CO), smoke and engine noise, but increased oxides of nitrogen (NOx). Compared to DF, B100 reduced CO, and smoke emissions by 50 and 43%, while a 15% increase in NOx emission was observed with the B100. Compared to DF, engine noise with B100 was reduced by 2.5 dB. (author)

  18. Karanja (Pongamia Pinnata) biodiesel production in Bangladesh, characterization of karanja biodiesel and its effect on diesel emissions

    International Nuclear Information System (INIS)

    This paper presents production of biodiesel (BD) from non-edible renewable karanja (Pongamia Pinnata) oil, determination of BD properties and influence of BD on engine performance and emissions. Bangladesh imports 2.4 million metric ton (MT) DF each year [M.N. Nabi, M.S. Akhter, K.M.F. Islam, Prospect of biodiesel production from jatropha curcas, a promising non edible oil seed in Bangladesh, International Conference on Mechanical Engineering (ICME, Dhaka, Bangladesh) Proceedings 2007, paper no. ICME07-TH-06. ]. It has 0.32 million hectare of unused land [M.N. Nabi, S.M.N. Hoque, M.S. Uddin, Prospect of Jatropha curcas and pithraj cultivation in Bangladesh, Journal of Engineering and Technology, IUT, Dhaka, Bangladesh, 7 (1) (2009) 41-54. ]. It has been found that cultivating of karanja plant in such unused land; Bangladesh can reduce DF import by 28%. Karanja methyl ester (KME), which is termed as BD, has been produced by well-known transesterification process. The properties of B100 (B100) and its blends were determined mainly according to ASTM standard and some of them were as per EN14214 standard. The Fourier transform infrared (FTIR) analysis showed that the DF fuel contained mainly alkanes and alkens, while the B100 contained mainly esters. The gas chromatography (GC) of B100 revealed that a maximum of 97% methyl ester was produced from karanja oil. Engine experiment result showed that all BD blends reduced engine emissions including carbon monoxide (CO), smoke and engine noise, but increased oxides of nitrogen (NOx). Compared to DF, B100 reduced CO, and smoke emissions by 50 and 43%, while a 15% increase in NOx emission was observed with the B100. Compared to DF, engine noise with B100 was reduced by 2.5 dB. (author)

  19. Current status and outlook in the application of microalgae in biodiesel production and environmental protection

    OpenAIRE

    Xin eZhang; Junfeng eRong; Hui eChen; Chenliu eHe; Qiang eWang

    2014-01-01

    Microalgae have been currently recognized as one group of the most potential feedstocks for biodiesel production due to high productivity potential, efficient biosynthesis of lipids and less competition with food production. Moreover, utilization of microalgae with environmental purposes (CO2 fixation, NOX and wastewater treatment) and biorefinery have been reported. However, there are still challenges that need to be addressed to ensure stable large-scale production with positive net energy ...

  20. Current Status and Outlook in the Application of Microalgae in Biodiesel Production and Environmental Protection

    OpenAIRE

    Zhang, Xin; Rong, Junfeng; Chen, Hui; He, Chenliu; Wang, Qiang

    2014-01-01

    Microalgae have been currently recognized as a group of the most potential feedstocks for biodiesel production due to high productivity potential, efficient biosynthesis of lipids, and less competition with food production. Moreover, utilization of microalgae with environmental purposes (CO2 fixation, NOx, and wastewater treatment) and biorefinery has been reported. However, there are still challenges that need to be addressed to ensure stable large-scale production with positive net energy b...

  1. Production of FAME biodiesel in E. coli by direct methylation with an insect enzyme.

    Science.gov (United States)

    Sherkhanov, Saken; Korman, Tyler P; Clarke, Steven G; Bowie, James U

    2016-01-01

    Most biodiesel currently in use consists of fatty acid methyl esters (FAMEs) produced by transesterification of plant oils with methanol. To reduce competition with food supplies, it would be desirable to directly produce biodiesel in microorganisms. To date, the most effective pathway for the production of biodiesel in bacteria yields fatty acid ethyl esters (FAEEs) at up to ~1.5 g/L. A much simpler route to biodiesel produces FAMEs by direct S-adenosyl-L-methionine (SAM) dependent methylation of free fatty acids, but FAME production by this route has been limited to only ~16 mg/L. Here we employ an alternative, broad spectrum methyltransferase, Drosophila melanogaster Juvenile Hormone Acid O-Methyltransferase (DmJHAMT). By introducing DmJHAMT in E. coli engineered to produce medium chain fatty acids and overproduce SAM, we obtain medium chain FAMEs at titers of 0.56 g/L, a 35-fold increase over titers previously achieved. Although considerable improvements will be needed for viable bacterial production of FAMEs and FAEEs for biofuels, it may be easier to optimize and transport the FAME production pathway to other microorganisms because it involves fewer enzymes. PMID:27053100

  2. Novel highly integrated biodiesel production technology in a centrifugal contactor separator device

    NARCIS (Netherlands)

    Kraai, G. N.; Schuur, B.; van Zwol, F.; van de Bovenkamp, H. H.; Heeres, H. J.

    2009-01-01

    The base catalyzed production of biodiesel (FAME) from sunflower oil and methanol in a continuous centrifugal contactor separator (CCS) with integrated reaction and phase separation was studied. The effect of catalyst loading (sodium methoxide), temperature, rotational frequency and flow rates of th

  3. Role of sufficient phosphorus in biodiesel production from diatom Phaeodactylum tricornutum.

    Science.gov (United States)

    Yu, Shi-Jin; Shen, Xiao-Fei; Ge, Huo-Qing; Zheng, Hang; Chu, Fei-Fei; Hu, Hao; Zeng, Raymond J

    2016-08-01

    In order to study the role of sufficient phosphorus (P) in biodiesel production by microalgae, Phaeodactylum tricornutum were cultivated in six different media treatments with combination of nitrogen (N) sufficiency/deprivation and phosphorus sufficiency/limitation/deprivation. Profiles of N and P, biomass, and fatty acids (FAs) content and compositions were measured during a 7-day cultivation period. The results showed that the FA content in microalgae biomass was promoted by P deprivation. However, statistical analysis showed that FA productivity had no significant difference (p = 0.63, >0.05) under the treatments of N deprivation with P sufficiency (N-P) and N deprivation with P deprivation (N-P-), indicating P sufficiency in N deprivation medium has little effect on increasing biodiesel productivity from P. triornutum. It was also found that the P absorption in N-P medium was 1.41 times higher than that in N sufficiency and P sufficiency (NP) medium. N deprivation with P limitation (N-P-l) was the optimal treatment for producing biodiesel from P. triornutum because of both the highest FA productivity and good biodiesel quality. PMID:27260287

  4. Biodiesel production from integration between reaction and separation system: reactive distillation process.

    Science.gov (United States)

    da Silva, Nívea de Lima; Santander, Carlos Mario Garcia; Batistella, César Benedito; Filho, Rubens Maciel; Maciel, Maria Regina Wolf

    2010-05-01

    Biodiesel is a clean burning fuel derived from a renewable feedstock such as vegetable oil or animal fat. It is biodegradable, non-inflammable, non-toxic, and produces lesser carbon monoxide, sulfur dioxide, and unburned hydrocarbons than petroleum-based fuel. The purpose of the present work is to present an efficient process using reactive distillation columns applied to biodiesel production. Reactive distillation is the simultaneous implementation of reaction and separation within a single unit of column. Nowadays, it is appropriately called "Intensified Process". This combined operation is especially suited for the chemical reaction limited by equilibrium constraints, since one or more of the products of the reaction are continuously separated from the reactants. This work presents the biodiesel production from soybean oil and bioethanol by reactive distillation. Different variables affect the conventional biodiesel production process such as: catalyst concentration, reaction temperature, level of agitation, ethanol/soybean oil molar ratio, reaction time, and raw material type. In this study, the experimental design was used to optimize the following process variables: the catalyst concentration (from 0.5 wt.% to 1.5 wt.%), the ethanol/soybean oil molar ratio (from 3:1 to 9:1). The reactive column reflux rate was 83 ml/min, and the reaction time was 6 min.

  5. Batch production of FAEE-biodiesel using a liquid lipase formulation

    DEFF Research Database (Denmark)

    Pedersen, Asbjørn Toftgaard; Nordblad, Mathias; Nielsen, Per Munk;

    2014-01-01

    competitive option for the conversion of oils and fats to biodiesel. This study investigates the impact of several process parameters on the production of fatty acid ethyl esters from rapeseed oil in a pure batch process on the liquid lipase formulation Callera™ Trans L. Oil conversion in excess of 98...

  6. Esterification of free fatty acids in biodiesel production with sulphonated pyrolysed carbohydrate catalysts

    DEFF Research Database (Denmark)

    Madsen, Anders Theilgaard; Riisager, Anders; Fehrmann, Rasmus

    The pre-treatment of free fatty acids in oils and fats in biodiesel production is of pivotal importance, and esterification in acidic medium must be done prior to basic transesterification of glycerides. The free fatty acids may be converted over an acidic catalyst of sulphonated pyrolysed...

  7. Biodiesel production using blue-green cyanobacterium Synechococcus elongatus PCC 7942

    NARCIS (Netherlands)

    Voshol, Gerben

    2015-01-01

    Due to concerns about global climate change and diminishing supplies of petroleum, there is a need to develop a clean sustainable alternative. The two main alternative fuels are bioethanol and biodiesel. Production of these biofuels using cyanobacteria is a new promising development. I describe the

  8. Application of Uncertainty and Sensitivity Analysis to a Kinetic Model for Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Nordblad, Mathias; Woodley, John;

    2014-01-01

    This paper demonstrates the added benefits of using uncertainty and sensitivity analysis in the kinetics of enzymatic biodiesel production. For this study, a kinetic model by Fedosov and co-workers is used. For the uncertainty analysis the Monte Carlo procedure was used to statistically quantify...

  9. Evaluation of the potential of biodiesel production from algae

    OpenAIRE

    Castro, Joana Daniela Fernandes de

    2012-01-01

    Dissertação de mestrado integrado em Engenharia de Materiais Com o presente trabalho pretendeu-se estudar à escala laboratorial a viabilidade técnica da produção de biodiesel a partir de microalgas, particularmente as microalgas Chlorella Ermersonii (C.E.) e Botryococcus Braunii (B.B.). Para tal foram estudadas e avaliadas as várias etapas que integram o processo de produção nomeadamente o cultivo e o crescimento das microalgas e a extração do óleo por distintas metodologias e técnicas com...

  10. Current status of biodiesel development in Brazil.

    Science.gov (United States)

    Ramos, Luiz Pereira; Wilhelm, Helena Maria

    2005-01-01

    In recent years, the concept of producing biodiesel from renewable lipid sources has regained international attention. In Brazil, a national program was launched in 2002 to evaluate the technical, economic, and environmental competitiveness of biodiesel in relation to the commercially available diesel oil. Several research projects were initiated nationwide to investigate and/or optimize biodiesel production from renewable lipid sources and ethanol derived from sugarcane (ethyl esters). Once implemented, this program will not only decrease our dependence on petroleum derivatives but also create new market opportunities for agribusiness, opening new jobs in the countryside, improving the sustainability of our energy matrix, and helping the Brazilian government to support important actions against poverty. This article discusses the efforts to develop the Brazilian biodiesel program in the context of technical specifications as well as potential oilseed sources.

  11. Current status of biodiesel development in Brazil.

    Science.gov (United States)

    Ramos, Luiz Pereira; Wilhelm, Helena Maria

    2005-01-01

    In recent years, the concept of producing biodiesel from renewable lipid sources has regained international attention. In Brazil, a national program was launched in 2002 to evaluate the technical, economic, and environmental competitiveness of biodiesel in relation to the commercially available diesel oil. Several research projects were initiated nationwide to investigate and/or optimize biodiesel production from renewable lipid sources and ethanol derived from sugarcane (ethyl esters). Once implemented, this program will not only decrease our dependence on petroleum derivatives but also create new market opportunities for agribusiness, opening new jobs in the countryside, improving the sustainability of our energy matrix, and helping the Brazilian government to support important actions against poverty. This article discusses the efforts to develop the Brazilian biodiesel program in the context of technical specifications as well as potential oilseed sources. PMID:15930560

  12. Influence of Treatment and Storage of Rapeseed on its Properties as a Raw Material for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Tajana Krička

    2007-09-01

    The conclusion of this research is that the characteristics of rapeseed hybrids corroborate viability of sowing this crop and its usability as raw material for oil production, and thus, for biodiesel production.

  13. Local Productive Arrangements for Biodiesel Production in Brazil – Environmental Assessment of Small-holder’s Integrated Oleaginous Crops Management

    Directory of Open Access Journals (Sweden)

    Geraldo Stachetti Rodrigues

    2009-04-01

    Full Text Available Sustainability assessments were carried out in small-holders’ farms in four territories where productive arrangements have been organized for production of minor oleaginous crops under the Brazilian biodiesel program. The study aimed at checking local impacts of the biodiesel productive chains at the rural establishment scale, and promoting the environmental performance of the selected farms, henceforth proposed as sustainable management demonstration units. Assessments were carried out with the APOIA-NovoRural system, which integrates 62 objective and quantitative indicators related to five sustainability dimensions: i Landscape Ecology, ii Environmental Quality (Atmosphere, Water and Soil, iii Socio-cultural Values, iv Economic Values and v Management and Administration. The main results point out that, in general, the ecological dimensions of sustainability, that is, the Landscape Ecology and Atmosphere, Water, and Soil quality indicators, show adequate field conditions, seemingly not yet negatively affected by increases in chemical inputs and natural resources use predicted as important potential impacts of the agro-energy sector. The Economic Values indicators have been favorably influenced in the studied farms, due to a steadier demand and improved prices for the oleaginous crops. On the other hand, valuable positive consequences expected for favoring farmers’ market insertion, such as improved Socio-cultural Values and Management & Administration indicators, are still opportunities to be materialized. The Environmental Management Reports issued to the farmers, based on the presented sustainability assessment procedures, offer valuable documentation and communication means for consolidating the organizational influence of the local productive arrangements studied. These productive arrangements were shown to be determinant for the selection of crop associations and diversification, as well as for the provision of technical assistance

  14. Non-catalytic alcoholysis process for production of biodiesel fuel by using bubble column reactor

    Science.gov (United States)

    Hagiwara, S.; Nabetani, H.; Nakajima, M.

    2015-04-01

    Biodiesel fuel is a replacement for diesel as a fuel produced from biomass resources. It is usually defined as a fatty acid methyl ester (FAME) derived from vegetable oil or animal fat. In European countries, such as Germany and France, biodiesel fuel is commercially produced mainly from rapeseed oil, whereas in the United States and Argentina, soybean oil is more frequently used. In many other countries such as Japan and countries in Southeast Asia, lipids that cannot be used as a food source could be more suitable materials for the production of biodiesel fuel because its production from edible oils could result in an increase in the price of edible oils, thereby increasing the cost of some foodstuffs. Therefore, used edible oil, lipids contained in waste effluent from the oil milling process, byproducts from oil refining process and crude oils from industrial crops such as jatropha could be more promising materials in these countries. The materials available in Japan and Southeast Asia for the production of biodiesel fuel have common characteristics; they contain considerable amount of impurities and are high in free fatty acids (FFA). Superheated methanol vapor (SMV) reactor might be a promising method for biodiesel fuel production utilizing oil feedstock containing FFA such as waste vegetable oil and crude vegetable oil. In the conventional method using alkaline catalyst, FFA contained in waste vegetable oil is known to react with alkaline catalyst such as NaOH and KOH generating saponification products and to inactivate it. Therefore, the FFA needs to be removed from the feedstock prior to the reaction. Removal of the alkaline catalyst after the reaction is also required. In the case of the SMV reactor, the processes for removing FFA prior to the reaction and catalyst after the reaction can be omitted because it requires no catalyst. Nevertheless, detailed study on the productivity of biodiesel fuel produced from waste vegetable oils and other non

  15. Biodiesel production from palm oil using active and stable K doped hydroxyapatite catalysts

    International Nuclear Information System (INIS)

    Highlights: • Novel heterogeneous animal bone-based catalysts were developed. • The optimum catalyst is 30K/HAP-600. • Maximum biodiesel yield of 96.4% was achieved using the novel catalyst. • The novel catalyst can achieve a desirable recyclability. • Little deactivation was found due to K+ ions leaching to the product. - Abstract: In the present study, calcined waste pig bone (CB, a solid waste from animal) derived hydroxyapatite (HAP) was served as the support for K2CO3 to prepare a cost-effective solid base catalyst for biodiesel production. The catalysts were characterized by XRD, FTIR, SEM–EDS, N2 adsorption–desorption and the Hammett indicator method. The effects of catalyst preparation conditions (such as the loading of K2CO3 on the CB and the calcination temperature), reaction conditions (such as reaction time, methanol/oil molar ratio and catalyst loading) and the catalyst reusability were studied in detail. The experimental results revealed that the highest biodiesel yield of 96.4% was obtained using the 30K/HAP-600 catalyst under the optimum reaction condition (reaction time of 1.5 h, catalyst loading of 8 wt.% and methanol/oil molar ratio of 9:1) due to its highest total basicity. Moreover, after reused for more than 8 cycles, the catalyst can still possess a rather high biodiesel yield (above 90%). A little deactivation was found due to K+ ions leaching to the product

  16. Biochemical Modulation of Lipid Pathway in Microalgae Dunaliella sp. for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Ahmad Farhad Talebi

    2015-01-01

    Full Text Available Exploitation of renewable sources of energy such as algal biodiesel could turn energy supplies problem around. Studies on a locally isolated strain of Dunaliella sp. showed that the mean lipid content in cultures enriched by 200 mg L−1 myoinositol was raised by around 33% (1.5 times higher than the control. Similarly, higher lipid productivity values were achieved in cultures treated by 100 and 200 mg L−1 myoinositol. Fluorometry analyses (microplate fluorescence and flow cytometry revealed increased oil accumulation in the Nile red-stained algal samples. Moreover, it was predicted that biodiesel produced from myoinositol-treated cells possessed improved oxidative stability, cetane number, and cloud point values. From the genomic point of view, real-time analyses revealed that myoinositol negatively influenced transcript abundance of AccD gene (one of the key genes involved in lipid production pathway due to feedback inhibition and that its positive effect must have been exerted through other genes. The findings of the current research are not to interprete that myoinositol supplementation could answer all the challenges faced in microalgal biodiesel production but instead to show that “there is a there there” for biochemical modulation strategies, which we achieved, increased algal oil quantity and enhanced resultant biodiesel quality.

  17. Hydrogen Production Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Hydrogen Production Technical Team Roadmap identifies research pathways leading to hydrogen production technologies that produce near-zero net greenhouse gas (GHG) emissions from highly efficient and diverse renewable energy sources. This roadmap focuses on initial development of the technologies, identifies their gaps and barriers, and describes activities by various U.S. Department of Energy (DOE) offices to address the key issues and challenges.

  18. In vitro Fermentation, Digestion Kinetics and Methane Production of Oilseed Press Cakes from Biodiesel Production.

    Science.gov (United States)

    Olivares-Palma, S M; Meale, S J; Pereira, L G R; Machado, F S; Carneiro, H; Lopes, F C F; Maurício, R M; Chaves, A V

    2013-08-01

    Following the extraction of oil for biodiesel production, oilseed press cakes are high in fat. As the dietary supplementation of fat is currently considered the most promising strategy of consistently depressing methanogenesis, it follows that oilseed press cakes may have a similar potential for CH4 abatement. As such, this study aimed to characterise the nutritive value of several oilseed press cakes, glycerine and soybean meal (SBM) and to examine their effects on in vitro ruminal fermentation, digestion kinetics and CH4 production. Moringa press oil seeds exhibited the greatest in sacco effective degradability (ED) of DM and CP (pMoringa oilseed press cakes produced the lowest CH4 (mg/g digested DM) at 6 and 12 h of incubation (pmoringa oilseed press cake at 400 g/kg DM has the greatest potential of the oilseed press cakes examined in this study, to reduce CH4 production, without adversely affecting nutrient degradability. PMID:25049890

  19. Lipid Yield and Composition of Azolla filiculoides and the Implications for Biodiesel Production

    OpenAIRE

    Brouwer, Paul; Werf, van der, W.; Schluepmann, Henriette; Reichart, Gert Jan; Nierop, Klaas G J

    2016-01-01

    The aquatic fern Azolla is one of the fastest-growing nitrogen-fixing plants on Earth and therefore considered as a potential source of biomass for bioenergy production. The lipid fraction from Azolla filiculoides was analyzed to investigate whether it suited biodiesel production. Since the productivity of Azolla is further increased at higher CO2 concentrations, A. filiculoides biomass was produced at 800 ppm CO2 mimicking a cultivation system utilizing CO2 waste from industry. The harvested...

  20. Design methodology for bio-based processing: Biodiesel and fatty alcohol production

    DEFF Research Database (Denmark)

    Simasatikul, Lida; Arpornwichanop, Amornchai; Gani, Rafiqul

    2012-01-01

    A systematic design methodology is developed for producing two main products plus side products starting with one or more bio-based renewable source. A superstructure that includes all possible reaction and separation operations is generated through thermodynamic insights and available data. The ....... Economic analysis and net present value are determined to find the best economically and operationally feasible process. The application of the methodology is presented through a case study involving biodiesel and fatty alcohol productions....

  1. Design methodology for bio-based processing: Biodiesel and fatty alcohol production

    DEFF Research Database (Denmark)

    Simasatikul, Lida; Arpornwichanopa, Amornchai; Gani, Rafiqul

    2013-01-01

    A systematic design methodology is developed for producing multiple main products plus side products starting with one or more bio-based renewable source. A superstructure that includes all possible reaction and separation operations is generated through thermodynamic insights and available data........ Economic analysis and net present value are determined to find the best economically and operationally feasible process. The application of the methodology is presented through a case study involving biodiesel and fatty alcohol productions....

  2. Design of a Small Scale Pilot Biodiesel Production Plant and Determination of the Fuel Properties of Biodiesel Produced With This Plant

    Directory of Open Access Journals (Sweden)

    Tanzer Eryılmaz

    2014-09-01

    Full Text Available A small scale pilot biodiesel production plant that has a volume of 65 liters/day has been designed, constructed and tested. The plant was performed using oil mixture (50% wild mustard seed oil + 50% refined canola oil and methanol with sodium hydroxide (NaOH catalyst. The fuel properties of biodiesel indicated as density at 15oC (889.64 kg/m3, kinematic viscosity at 40oC (6.975 mm2/s, flash point (170oC, copper strip corrosion (1a, water content (499.87 mg/kg, and calorific value (39.555 MJ/kg, respectively.

  3. Design of a Small Scale Pilot Biodiesel Production Plant and Determination of the Fuel Properties of Biodiesel Produced With This Plant

    OpenAIRE

    Tanzer Eryılmaz; Muttalip Erkan

    2014-01-01

    A small scale pilot biodiesel production plant that has a volume of 65 liters/day has been designed, constructed and tested. The plant was performed using oil mixture (50% wild mustard seed oil + 50% refined canola oil) and methanol with sodium hydroxide (NaOH) catalyst. The fuel properties of biodiesel indicated as density at 15oC (889.64 kg/m3), kinematic viscosity at 40oC (6.975 mm2/s), flash point (170oC), copper strip corrosion (1a), water content (499.87 mg/kg), and calorific value (39....

  4. Continuous Low Cost Transesterification Process for the Production of Coconut Biodiesel

    Directory of Open Access Journals (Sweden)

    Chandra P. Singh

    2010-01-01

    Full Text Available Biodiesel, or alkyl ester, is an alternative renewable, biodegradable, and non-toxic diesel fuel produced by the catalytic transesterification of vegetable oil. Here we characterize a system for continuous transesterification of vegetable oil using five continuous stirring tank reactors (5CSTRs. We tested residence times of 16–43min, stirring speeds of 200–800rpm, a catalyst concentration (KOH of 0.25–1 wt% of oil (in gram, different total flow rates of the oil and MeOH, and on the production performance of the 5 stage continuous reactor for transesterification of vegetable oil. Using a molar ratio of oil:methanol of 1:7 and a reaction temperature of 65 °C, we show that a high stirring speed increased the reaction rate, but an excessive stir speed decreased the reaction rate and conversion to biodiesel. Furthermore, a higher catalyst percentage significantly increased the reaction rate and production capacity. A catalyst percentage of 1 wt% of oil gave the best conversion; 99.04 ± 0.05%. The resulting biodiesel esters were characterized for their physical and fuel properties including density, viscosity, iodine volume, acid volume, cloud point, pure point, gross heat of combustion, and volatility. The purity and conversion of the biodiesel was analyzed by HPLC.

  5. Green biodiesel production from waste cooking oil using an environmentally benign acid catalyst.

    Science.gov (United States)

    Tran, Thi Tuong Vi; Kaiprommarat, Sunanta; Kongparakul, Suwadee; Reubroycharoen, Prasert; Guan, Guoqing; Nguyen, Manh Huan; Samart, Chanatip

    2016-06-01

    The application of an environmentally benign sulfonated carbon microsphere catalyst for biodiesel production from waste cooking oil was investigated. This catalyst was prepared by the sequential hydrothermal carbonization and sulfonation of xylose. The morphology, surface area, and acid properties were analyzed. The surface area and acidity of the catalyst were 86m(2)/g and 1.38mmol/g, respectively. In addition, the presence of sulfonic acid on the carbon surface was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The catalytic activity was tested for biodiesel production from waste cooking oil via a two-step reaction to overcome reaction equilibrium. The highest biodiesel yield (89.6%) was obtained at a reaction temperature of 110°C, duration time of 4h, and catalyst loading of 10wt% under elevated pressure 2.3bar and 1.4bar for first and second step, respectively. The reusability of the catalyst was investigated and showed that the biodiesel yield decreased by 9% with each cycle; however, this catalyst is still of interest because it is an example of green chemistry, is nontoxic, and makes use of xylose waste.

  6. Production of Biodiesel Fuel from Waste Soya bean Cooking Oil by Alkali Trans-esterification Process

    Directory of Open Access Journals (Sweden)

    Ajinkya Dipak Deshpande*,

    2016-04-01

    Full Text Available Biodiesel is biodegradable, clean-burning, non-toxic, renewable, high-quality, and cheap diesel fuel made primarily from waste vegetable oil which can be used without any alterations in engine design. The paper is concerned with the extraction and quality evaluation of the biodiesel fuels synthesized from waste soya bean cooking oil. Waste soya bean cooking oil had high amount of free fatty acid. Thus, single step transesterification process with the aid of homogeneous catalyst as 1% potassium hydroxide were implemented in this experiment. Methanol was chosen as alcohol solvent. In the transesterification process, the triglycerides in waste cooking oil was reacted with a methanol to form esters and glycerol as by product.The biodiesel were extracted for different oil to methanol ratio as 1:2, 1:3 and 1:4. The highest biodiesel yield of 76% was obtained at 1:3 volumetric ratio for 60 ºC reaction temperature and 1250 rpm stirring speed. Results show that the optimal methyl ester yield of 90% occurred at methanol: oil volume ratio of 3:1. The product met the ASTM fuel standards for relative density, acid value, relative density, calorific value, flash point and kinematic viscosity.

  7. Green biodiesel production from waste cooking oil using an environmentally benign acid catalyst.

    Science.gov (United States)

    Tran, Thi Tuong Vi; Kaiprommarat, Sunanta; Kongparakul, Suwadee; Reubroycharoen, Prasert; Guan, Guoqing; Nguyen, Manh Huan; Samart, Chanatip

    2016-06-01

    The application of an environmentally benign sulfonated carbon microsphere catalyst for biodiesel production from waste cooking oil was investigated. This catalyst was prepared by the sequential hydrothermal carbonization and sulfonation of xylose. The morphology, surface area, and acid properties were analyzed. The surface area and acidity of the catalyst were 86m(2)/g and 1.38mmol/g, respectively. In addition, the presence of sulfonic acid on the carbon surface was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The catalytic activity was tested for biodiesel production from waste cooking oil via a two-step reaction to overcome reaction equilibrium. The highest biodiesel yield (89.6%) was obtained at a reaction temperature of 110°C, duration time of 4h, and catalyst loading of 10wt% under elevated pressure 2.3bar and 1.4bar for first and second step, respectively. The reusability of the catalyst was investigated and showed that the biodiesel yield decreased by 9% with each cycle; however, this catalyst is still of interest because it is an example of green chemistry, is nontoxic, and makes use of xylose waste. PMID:27053375

  8. Sequential co-production of biodiesel and bioethanol with spent coffee grounds.

    Science.gov (United States)

    Kwon, Eilhann E; Yi, Haakrho; Jeon, Young Jae

    2013-05-01

    The sequential co-production of bioethanol and biodiesel from spent coffee grounds was investigated. The direct conversion of bioethanol from spent coffee grounds was not found to be a desirable option because of the relatively slow enzymatic saccharification behavior in the presence of triglycerides and the free fatty acids (FFAs) found to exist in the raw materials. Similarly, the direct transformation of the spent coffee grounds into ethanol without first extracting lipids was not found to be a feasible alternative. However, the crude lipids extracted from the spent coffee grounds were themselves converted into fatty acid methyl ester (FAME) and fatty acid ethyl ester (FAEE) via the non-catalytic biodiesel transesterification reaction. The yields of bioethanol and biodiesel were 0.46 g g(-1) and 97.5±0.5%, which were calculated based on consumed sugar and lipids extracted from spent coffee grounds respectively. Thus, this study clearly validated our theory that spent coffee grounds could be a strong candidate for the production of bioethanol and biodiesel. PMID:23567719

  9. Relation between quality and production cost for pure biodiesel bases on the mixes of raw materials

    Science.gov (United States)

    Tsanaktsidis, C. G.; Spinthiropoulos, K. G.; Guliyev, Fariz; Dimitriou, D.; Euthaltsidou, K.; Tzilantonis, G. T.

    2016-08-01

    Nowadays biodiesel has become more attractive because it is made from renewable resources. The main ingredients of industrial biodiesel are rap oil, sun oil, fat acid, olive oil cooked. In this study we verify that, the proportion of these components sets the qualitative composition and energy efficiency of the final product. Essential we link the raw materials (rap oil, sun oil, fat acid, olive oil cooked) used in the manufacture of industrial biodiesel the proportion of mixes, with the variation of physicochemical properties of biodiesel produced. According to the quantitative analysis we notice that the physiochemical properties which alter the value for example humidity, acidity, while a large number of physicochemical properties do not change their value depending on the ratio of raw materials in each mixture. The analysis of these changes seems that the presence of fat acids is negative for the quality of the mixture. From the analysis of the cost of the final mixtures that lower cost is achieved in the mixture was 10 and the highest cost was in the mixture 3. Based on a study of the cost of the mixtures can determine a basic relation between the quality and the cost of the final product.

  10. Improving the economics of biodiesel production through the use of low value lipids as feedstocks. Vegetable oil soapstock

    Energy Technology Data Exchange (ETDEWEB)

    Haas, Michael J. [U.S. Department of Agriculture, Agricultural Research Service, Eastern Regional Research Center, 600 East Mermaid Lane, Wyndmoor, PA 19038 (United States)

    2005-06-25

    Semirefined and refined vegetable oils are the predominant feedstocks for the production of biodiesel. However, their relatively high costs render the resulting fuels unable to compete with petroleum-derived fuel. We have investigated the production of fatty acid methyl esters (FAME; biodiesel) from soapstock (SS), a byproduct of edible oil refining that is substantially less expensive than edible-grade refined oils. Multiple approaches were taken in search of a route to the production of fatty acid methyl esters from soybean soapstock. The most effective method involved the complete saponification of the soapstock followed by acidulation using methods similar to those presently employed in industry. This resulted in an acid oil with a free fatty acid (FFA) content greater than 90%. These fatty acids were efficiently converted to methyl esters by acid-catalyzed esterification. The fatty acid composition of the resulting ester product reflected that of soy soapstock and was largely similar to that of soybean oil. Following a simple washing protocol, this preparation met the established specifications for biodiesel of the American Society for Testing and Materials. Engine emissions and performance during operation on soy soapstock biodiesel were comparable to those on biodiesel from soy oil. An economic analysis suggested that the production cost of soapstock biodiesel would be approximately US$ 0.41/l, a 25% reduction relative to the estimated cost of biodiesel produced from soy oil. (author)

  11. Glycerol-enriched heterogeneous catalyst for biodiesel production from soybean oil and waste frying oil

    International Nuclear Information System (INIS)

    Highlights: • An alkali metal-glyceroxide heterogeneous catalyst was improved aiming biodiesel production. • Optimized reaction conditions were comparable to homogeneous catalysis. • High yield and good product quality was obtained using refined and waste oil. • The catalyst could be reused four times and prepared using methanol or ethanol. - Abstract: In the present work, biodiesel production using a glycerol enriched heterogeneous catalyst was studied. For that purpose, the catalyst performance at different glycerol concentrations and reaction conditions (under ambient atmosphere) was evaluated and two triglyceride sources were used. The most active catalyst was produced using CaO, glycerol and methanol at a mass ratio of 1:1.6:13.4, respectively. By performing the transesterification reaction under ambient atmosphere during 2 h at 333 K, using 0.4 wt.% of catalyst and 7:1 methanol to oil molar ratio, a good quality product was obtained (EN 14214) using both soybean oil and waste frying oil. The catalyst could be re-used during four cycles and could also be prepared by using ethanol instead of methanol (with differences <4% on product conversion). The glycerol by-product, being rich in calcium soaps, might additionally be used for the enrichment of animal diets. The present process allowed the production of biodiesel from different triglyceride sources using a very active heterogeneous catalyst at competitive reaction conditions compared to the homogeneous process and also enabled a two-way recycling of the glycerol by-product

  12. Lecithin: a by-product of biodiesel production and a source of choline for dairy cows

    Directory of Open Access Journals (Sweden)

    Igino Andrighetto

    2012-04-01

    Full Text Available The aim of the present study was to compare the effects of soy lecithins (L, a by-product of the biodiesel production process, and choline chloride microencapsulated with hydrogenated vegetable oils (C on dry matter intake, milk yield,  milk quality traits, milk choline and haematological profile of dairy cows. A total of 12 mid-lactating Holstein Friesian cows were assigned to one of two experimental groups and fed according to cross-over design (2 diets x 2 periods. Diets were isoenergetic, isofibrous and isonitrogenous and had the same content of choline. Dry matter intake was not affected by the diet, but L led to lower milk choline (P

  13. Production of Biodiesel from Oleic Acid and Methanol by Reactive Distillation

    Directory of Open Access Journals (Sweden)

    Kusmiyati Kusmiyati

    2010-10-01

    Full Text Available Biodiesel is an alternative diesel fuel that is produced from vegetable oils and animal fats. Generally, it is formed by transesterification reaction of triglycerides in the vegetable oil or animal fat with an alcohol. In this work, esterification reaction was carried out using oleic acid, methanol and sulphuric acid as a catalyst by reactive distillation method. In order to determine the best conditions for biodiesel production by reactive distillation, the experiments were carried out at different temperature (100 oC, 120 oC, 150 oC and 180 oC using methanol/oleic acid molar ratios (1:1, 5:1, 6:1, 7:1, 8:1, catalyst/ oleic acid molar ratios (0.5%wt, 1%wt, 1.5%wt and 2%wt and reaction times (15, 30, 45, 60, 75 and 90 minutes. Results at temperature 180 oC, methanol/ oleic acid molar ratio of 8:1, amount of catalyst 1% for 90 minute reaction time gives the highest conversion of oleic acid above 0.9571. Biodiesel product from oleic acid was analysed by ASTM (American Standard for Testing Material. The results show that the biodiesel produced has the quality required to be a diesel substitute. ©2010 BCREC UNDIP. All rights reserved(Received: 1st January 2010, Revised: 18th March 2010; Accepted: 18th March 2010[How to Cite: K. Kusmiyati, A. Sugiharto. (2010. Production of Biodiesel from Oleic Acid and Methanol by Reactive Distillation. Bulletin of Chemical Reaction Engineering and Catalysis, 5(1: 1-6. doi:10.9767/bcrec.5.1.37.1-6][How to Link/DOI: http://dx.doi.org/10.9767/bcrec.5.1.37.1-6

  14. Production of Biodiesel from Oleic Acid and Methanol by Reactive Distillation

    Directory of Open Access Journals (Sweden)

    Kusmiyati Kusmiyati

    2010-10-01

    Full Text Available Biodiesel is an alternative diesel fuel that is produced from vegetable oils and animal fats. Generally, it is formed by transesterification reaction of triglycerides in the vegetable oil or animal fat with an alcohol. In this work, esterification reaction was carried out using oleic acid, methanol and sulphuric acid as a catalyst by reactive distillation method. In order to determine the best conditions for biodiesel production by reactive distillation, the experiments were carried out at different temperature (100 0C, 120 0C, 150 0C and 180 0C using methanol/oleic acid molar ratios (1:1, 5:1, 6:1, 7:1, 8:1, catalyst/ oleic acid molar ratios (0.5%wt, 1%wt, 1.5%wt and 2%wt and reaction times (15, 30, 45, 60, 75 and 90 minutes. Results at temperature 180 0C, methanol/ oleic acid molar ratio of 8:1, amount of catalyst 1% for 90 minute reaction time gives the highest conversion of oleic acid above 0.9571. Biodiesel product from oleic acid was analysed by ASTM (American Standard for Testing Material. The results show that the biodiesel produced has the quality required to be a diesel substitute. © 2010 BCREC UNDIP. All rights reserved. (Received: 1st January 2010, Revised: 18th March 2010; Accepted: 18th March 2010[How to Cite: K. Kusmiyati, A. Sugiharto. (2010. Production of Biodiesel from Oleic Acid and Methanol by Reactive Distillation. Bulletin of Chemical Reaction Engineering and Catalysis, 5(1: 1-6. doi:10.9767/bcrec.5.1.7103.1-6][How to Link/DOI: http://dx.doi.org/10.9767/bcrec.5.1.7103.1-6 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/7103

  15. Rapid production of biodiesel in mesoscale oscillatory baffled reactors

    Energy Technology Data Exchange (ETDEWEB)

    Phan, A.N.; Harvey, A.P.; Eze, V. [School of Chemical Engineering and Advanced Materials, Newcastle Upon Tyne (United Kingdom)

    2012-07-15

    Continuous alkali-catalyzed transesterification of rapeseed oil with methanol was carried out in three mesoreactor designs. The induction time decreased with oscillatory Reynolds number for all three reactors. Stable steady states were achieved within induction times of 1.5, 2.5, and 4.0 residence times for the integral, wire wool, and helical baffle designs, respectively. Both experimental and simulated results indicated that under the given conditions there is an optimal residence time for homogeneous transesterification. Higher residence times resulted in reduced fatty acid methyl ester content due to the saponification side reaction. The results demonstrate that biodiesel can be produced at an industrially acceptable level of conversion (> 95 %) in < 5 min residence time. This requires a combination of high catalyst concentration and good mixing. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. BIOPHYSICOCHEMICAL EVALUATION AND MICROPROPAGATION STUDIES ON NEEM FOR BIODIESEL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Prithviraj Bhandare

    2015-03-01

    Full Text Available In this experiment the seed oils of 30 Neem (Azadirachta indica. A. juss biotypes were screened and evaluated for their physio-chemical parameters for oil content, biodiesel yield, density, viscosity, iodine value , free fatty acid, saponification value, flash point and fire point which were estimated for selection of the elite neem biotype. The best shoot regeneration (60%-80% was observed in Murashige and Skoog (MS medium supplemented with naphthalene acetic acid NAA (0.2-0.4 mg/L and benzyl amino purine BAP (0.2-0.4 mg/L. Root induction (80% was successfully obtained in MS medium supplemented with IBA (0.05 mg/L and IAA (0.05 mg/L. Acclimatization and hardening was quite successful with survival rate of 60%.

  17. Calcined sodium silicate as solid base catalyst for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Feng; Peng, Zhen-Gang; Dai, Jian-Ying; Xiu, Zhi-Long [Department of Bioscience and Biotechnology, School of Environmental and Biological Science and Technology, Dalian University of Technology, Dalian 116024 (China)

    2010-03-15

    This paper examined the use of calcined sodium silicate as a novel solid base catalyst in the transesterification of soybean oil with methanol. The calcined sodium silicate was characterized by DTA-TG, Hammett indicator method, XRD, SEM, BET, IR and FT-IR. It catalyzed the transesterification of soybean oil to biodiesel with a yield of almost 100% under the following conditions: sodium silicate of 3.0 wt.%, a molar ratio of methanol/oil of 7.5:1, reaction time of 60 min, reaction temperature of 60 C, and stirring rate of 250 rpm. The oil containing 4.0 wt.% water or 2.5 wt.% FFA could also be transesterified by using this catalyst. The catalyst can be reused for at least 5 cycles without loss of activity. (author)

  18. Biodiesel and its properties

    Science.gov (United States)

    Biodiesel is a bio-based alternative to conventional diesel fuel derived from petroleum. It consists mainly of the fatty acid esters of vegetable oils or other triacylglycerol feedstocks. This chapter provides a background on biodiesel as well as an overview of biodiesel production, analysis, and pr...

  19. Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine

    International Nuclear Information System (INIS)

    Highlights: • Calophyllum inophyllum has been evaluated as a potential feedstock for biodiesel. • Acid and base catalyzed transesterification processes was used to produce biodiesel. • The physiochemical properties of CIME fulfilled specification of ASTM D6751. • Engine performance and emission are conducted for CIME and its blends. - Abstract: In the present study, crude Calophyllum inophyllum oil (CCIO) has been evaluated as a potential feedstock for biodiesel production. C.inophyllum oil has high acid value which is 59.30 mg KOH/g. Therefore, the degumming, esterification, neutralization and transesterification process are carried out to reduce the acid value to 0.34 mg KOH/g. The optimum yield was obtained at 9:1 methanol to oil ratio with 1 wt.%. NaOH catalyst at 50 °C for 2 h. On the other hand, the C.inophyllum biodiesel properties fulfilled the specification of ASTM D6751 and EN 14214 biodiesel standards. After that, the C.inophyllum biodiesel diesel blends were tested to evaluate the engine performance and emission characteristic. The performance and emission of 10% C.inophyllum biodiesel blends (CIB10) give a satisfactory result in diesel engines as the brake thermal increase 2.30% and fuel consumption decrease 3.06% compared to diesel. Besides, CIB10 reduces CO and smoke opacity compared to diesel. In short, C.inophyllum biodiesel can become an alternative fuel in the future

  20. Dyeing Industry Effluent System as Lipid Production Medium of Neochloris sp. for Biodiesel Feedstock Preparation

    OpenAIRE

    Vidyadharani Gopalakrishnan; Dhandapani Ramamurthy

    2014-01-01

    Microalgae lipid feedstock preparation cost was an important factor in increasing biodiesel fuel hikes. This study was conducted with the concept of implementing an effluent wastewater as lipid production medium for microalgae cultivation. In our study textile dyeing industry effluent was taken as a lipid production medium for Neochloris sp. cultivation. The changes in physicochemical analysis of effluent before and after Neochloris sp. treatment were recorded using standard procedures and AA...

  1. Biodiesel production from microalgal isolates of southern Pakistan and quantification of FAMEs by GC-MS/MS analysis

    Directory of Open Access Journals (Sweden)

    Musharraf Syed

    2012-12-01

    Full Text Available Abstract Background Microalgae have attracted major interest as a sustainable source for biodiesel production on commercial scale. This paper describes the screening of six microalgal species, Scenedesmus quadricauda, Scenedesmus acuminatus, Nannochloropsis sp., Anabaena sp., Chlorella sp. and Oscillatoria sp., isolated from fresh and marine water resources of southern Pakistan for biodiesel production and the GC-MS/MS analysis of their fatty acid methyl esters (FAMEs. Results Growth rate, biomass productivity and oil content of each algal species have been investigated under autotrophic condition. Biodiesel was produced from algal oil by acid catalyzed transesterification reaction and resulting fatty acid methyl esters (FAMEs content was analyzed by GC/MS. Fatty acid profiling of the biodiesel, obtained from various microalgal oils showed high content of C-16:0, C-18:0, cis-Δ9C-18:1, cis-Δ11C-18:1 (except Scenedesmus quadricauda and 10-hydroxyoctadecanoic (except Scenedesmus acuminatus. Absolute amount of C-14:0, C-16:0 and C-18:0 by a validated GC-MS/MS method were found to be 1.5-1.7, 15.0-42.5 and 4.2-18.4 mg/g, respectively, in biodiesel obtained from various microalgal oils. Biodiesel was also characterized in terms of cetane number, kinematic viscosity, density and higher heating value and compared with the standard values. Conclusion Six microalgae of local origin were screened for biodiesel production. A method for absolute quantification of three important saturated fatty acid methyl esters (C-14, C-16 and C-18 by gas chromatography-tandem mass spectrometry (GC-MS/MS, using multiple reactions monitoring (MRM mode, was employed for the identification and quantification of biodiesels obtained from various microalgal oils. The results suggested that locally found microalgae can be sustainably harvested for the production of biodiesel. This offers the tremendous economic opportunity for an energy-deficient nation.

  2. Biodiesel production potential of mixed microalgal culture grown in domestic wastewater.

    Science.gov (United States)

    Soydemir, Gulfem; Keris-Sen, Ulker Diler; Sen, Unal; Gurol, Mirat D

    2016-01-01

    In this study, a mixed microalgal culture grown in secondarily treated domestic wastewater effluent was investigated for biodiesel production using in situ transesterification method with conventional heating. The total lipid content of the mixed culture was found as 26.2% ± 0.6 by weight of dry biomass, and 74% of the lipids were contributed by total glycerides. In situ transesterification with conventional heating process under acidic conditions produced higher biodiesel yield with chloroform as the co-solvent (82.1% ± 3.9) compared to hexane (55.3% ± 3.9) under the same reaction conditions. The gas chromatography analysis showed that FAME composition was mainly composed of palmitic, palmitoleic, stearic, oleic, linoleic and linolenic acid methyl esters., and thus the mixed microalgal culture fed by domestic wastewaters has had comparable biodiesel conversion yields and FAME composition to mono-culture and pure cultures fed by synthetic culture media. Hence, this study showed that secondarily treated domestic wastewater could potentially be a suitable and sustainable medium for microalgae grown to be used as biodiesel feedstock.

  3. Biodiesel Production from Spent Fish Frying Oil Through Acid-Base Catalyzed Transesterification

    Directory of Open Access Journals (Sweden)

    Abdalrahman B. Fadhil

    2012-06-01

    Full Text Available Biodiesel fuels were prepared from a special type of frying oil namely spent fish frying oil through two step transesterification viz. acid-base catalyzed transesterification. Hydrochloric acid and potassium hydroxide with methanol were used for this purpose. The oil was pre-treated with (1.0 wt% HCl and methanol to reduce free fatty acids content of the oil. Then, conditions of the base catalyzed step such as base concentration, reaction temperature, methanol to oil molar ratio and reaction time were optimized. The study raveled that, 0.50% KOH w/w of oil; a 6:1 methanol to oil molar ratio; a reaction temperature of 60°C and a duration of 1h were the optimal conditions because they resulted in high biodiesel yield. Fuel properties of the products were assessed and found better than those of the parent oil. Furthermore, they met the specified limits according to the ASTM standards. Thin layer chromatography was used as a simple technique to monitor the transesterification of the oil. Blending of the optimal biodiesel sample with petro diesel using specified volume percentages was done as well. The results indicated that biodiesel had slight effect on the values of the assessed properties.

  4. Process optimization for biodiesel production from mahua (Madhuca indica) oil using response surface methodology.

    Science.gov (United States)

    Ghadge, Shashikant Vilas; Raheman, Hifjur

    2006-02-01

    A central composite rotatable design was used to study the effect of methanol quantity, acid concentration and reaction time on the reduction of free fatty acids content of mahua oil during its pretreatment for making biodiesel. All the three variables significantly affected the acid value of the product, methanol being the most effective followed by reaction time and acid catalyst concentration. Using response surface methodology, a quadratic polynomial equation was obtained for acid value by multiple regression analysis. Verification experiments confirmed the validity of the predicted model. The optimum combinations for reducing the acid level of mahua oil to less than 1% after pretreatment was 0.32 v/v methanol-to-oil ratio, 1.24% v/v H2SO4 catalyst and 1.26 h reaction time at 60 degrees C. After the pretreatment of mahua oil, transesterification reaction was carried out with 0.25 v/v methanol-to-oil ratio (6:1 molar ratio) and 0.7% w/v KOH as an alkaline catalyst to produce biodiesel. The fuel properties of mahua biodiesel so obtained complied the requirements of both the American and European standards for biodiesel. PMID:15908200

  5. Process optimization for biodiesel production from mahua (Madhuca indica) oil using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Ghadge, S.V.; Raheman, H. [Indian Inst. of Technology, Kharagpur (India). Agricultural and Food Engineering Dept.

    2006-02-15

    A central composite rotatable design was used to study the effect of methanol quantity, acid concentration and reaction time on the reduction of free fatty acids content of mahua oil during its pretreatment for making biodiesel. All the three variables significantly affected the acid value of the product, methanol being the most effective followed by reaction time and acid catalyst concentration. Using response surface methodology, a quadratic polynomial equation was obtained for acid value by multiple regression analysis. Verification experiments confirmed the validity of the predicted model. The optimum combinations for reducing the acid level of mahua oil to less than 1% after pretreatment was 0.32 v/v methanol-to-oil ratio, 1.24% v/v H{sub 2}SO{sub 4} catalyst and 1.26 h reaction time at 60 {sup o}C. After the pretreatment of mahua oil, transesterification reaction was carried out with 0.25 v/v methanol-to-oil ratio (6:1 molar ratio) and 0.7% w/v KOH as an alkaline catalyst to produce biodiesel. The fuel properties of mahua biodiesel so obtained complied the requirements of both the American and European standards for biodiesel. (author)

  6. Base catalyzed transesterification of acid treated vegetable oil blend for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Yusup, Suzana; Khan, Modhar Ali [Chemical Engineering Department, Universiti Teknologi PETRONAS, Seri Iskandar, Tronoh, Perak 31750 (Malaysia)

    2010-10-15

    Biodiesel can be produced from low cost non-edible oils and fats. However, most of these sources are of high free fatty acid content which requires two stage transesterification to reduce the acid value and produce biodiesel. The acid treatment step is usually followed by base transesterification since the latter can yield higher conversions of methyl esters at shorter reaction time when compared with acid catalyzed reaction. In the current study, base transesterification in the second stage of biodiesel synthesis is studied for a blend of crude palm/crude rubber seed oil that had been characterized and treated with acid esterification. Optimum conditions for the reaction were established and effect of each variable was investigated. The base catalyzed transesterification favored a temperature of 55 C with methanol/oil molar ratio of 8/1 and potassium hydroxide at 2% (ww{sup -1}) (oil basis). The conversion of methyl esters exceeded 98% after 5 h and the product quality was verified to match that for biodiesel with international standards. (author)

  7. Modeling of biodiesel production in algae cultivation with anaerobic digestion (ACAD)

    International Nuclear Information System (INIS)

    This study presents a model of an ecotechnology that combines algae cultivation with anaerobic digestion in order to recycle nutrients and to reduce the need for external energy. The concept is to convert organic waste into several products, such as electricity, biodiesel and organic fertilizer. It is labeled as the ACAD biorefinery. The simulation model of the ACAD biorefinery proved itself to be a powerful tool for understanding the symbioses and dynamics of the system, and therefore also a good tool for reaching political decisions. The model shows that the ACAD biorefinery could be totally independent of external energy supplies. Energy calculations indicate that more energy can be produced by combining the algae cultivation and anaerobic digestion processes. For every unit of energy entering the system in feedstock, 0.6 units of energy are exported as either biodiesel or electricity. The exported electricity accounts for approximately 30% of the total exported energy, while the remaining 70% is exported as biodiesel. By producing its own energy, the biorefinery improves its renewability and level of carbon neutrality. - Highlights: • The model combines algae cultivation with anaerobic digestion. • In the model nutrients and carbon dioxide are recycled. • Organic waste is converted into electrical power, biodiesel and organic fertilizer. • Results showed that more energy can be produced by combining the processes

  8. Production and characterization of biodiesel using palm kernel oil; fresh and recovered from spent bleaching earth

    Directory of Open Access Journals (Sweden)

    Abiodun Aladetuyi

    2014-12-01

    Full Text Available Palm kernel oil (PKO was recovered from spent bleaching earth with a yield of 16 %, using n-hexane while the fresh oil was extracted from palm kernel with n-hexane and a yield of 40.23% was obtained. These oils were trans-esterified with methanol under the same reaction conditions: 100 oC, 2 h reaction time, and oil-methanol ratio of 5:1 (w/v. The cocoa pod ash (CPA was compared with potassium hydroxide (KOH as catalyst. The percentage yields of biodiesel obtained from PKO catalysed by CPA and KOH were 94 and 90%, respectively. While the yields achieved using the recovered oil catalysed by CPA and KOH were measured at 86 and 81.20 %. The physico-chemical properties of the biodiesel produced showed that the flash point, viscosity, density, ash content, percentage carbon content, specific gravity and the acid value fell within American Society for Testing and Materials (ASTM specifications for biodiesel. The findings of this study suggest that agricultural residues such as CPA used in this study could be explored as alternatives for KOH catalyst for biodiesel production.

  9. The Production of Biodiesel and Bio-kerosene from Coconut Oil Using Microwave Assisted Reaction

    Science.gov (United States)

    SAIFUDDIN, N.; SITI FAZLILI, A.; KUMARAN, P.; PEI-JUA, N.; PRIATHASHINI, P.

    2016-03-01

    Biofuels including biodiesel, an alternative fuel, is renewable, environmentally friendly, non-toxic and low emissions. The raw material used in this work was coconut oil, which contained saturated fatty acids about 90% with high percentage of medium chain (C8-C12), especially lauric acid and myristic acid. The purpose of this research was to study the effect of power and NaOH catalyst in transesterification assisted by microwave for production of biofuels (biodiesel and bio-kerosene) derived from coconut oil. The reaction was performed with oil and methanol using mole ratio of 1:6, catalyst concentration of 0.6% with microwave power at 100W, 180W, 300W, 450W, 600W, and 850W. The reaction time was set at of 3, 5, 7, 10 and 15 min. The results showed that microwave could accelerate the transesterification process to produce biodiesel and bio-kerosene using NaOH catalyst. The highest yield of biodiesel was 97.17 %, or 99.05 % conversion at 5 min and 100W microwave power. Meanwhile, the bio-kerosene obtained was 65% after distillation.

  10. Strategies for Lipid Production Improvement in Microalgae as a Biodiesel Feedstock

    Science.gov (United States)

    Li, Z. H.; Hiltunen, E.

    2016-01-01

    In response to the energy crisis, global warming, and climate changes, microalgae have received a great deal of attention as a biofuel feedstock. Due to a high lipid content in microalgal cells, microalgae present as a promising alternative source for the production of biodiesel. Environmental and culturing condition variations can alter lipid production as well as chemical compositions of microalgae. Therefore, application of the strategies to activate lipid accumulation opens the door for lipid overproduction in microalgae. Until now, many original studies regarding the approaches for enhanced microalgal lipid production have been reported in an effort to push forward the production of microalgal biodiesel. However, the current literature demonstrates fragmented information available regarding the strategies for lipid production improvement. From the systematic point of view, the review highlights the main approaches for microalgal lipid accumulation induction to expedite the application of microalgal biodiesel as an alternative to fossil diesel for sustainable environment. Of the several strategies discussed, the one that is most commonly applied is the design of nutrient (e.g., nitrogen, phosphorus, and sulfur) starvation or limitation. Other viable approaches such as light intensity, temperature, carbon dioxide, salinity stress, and metal influence can also achieve enhanced microalgal lipid production. PMID:27725942

  11. Improvement of lipid content of Chlorella minutissima MCC 5 for biodiesel production.

    Science.gov (United States)

    Chakraborty, Sourabh; Mohanty, Debabrata; Ghosh, Supratim; Das, Debabrata

    2016-09-01

    Lipids extracted from microalgae have been considered as a potential source for the production of biodiesel. Enhancement of lipid has the limitations of low biomass productivity. So, the main objective of the present study was to deduce suitable conditions for the improvement of biomass production followed by enhancement of lipid content. After optimization, a strategy for two stage cultivation was utilized where high lipid content was obtained with a high biomass concentration. Optimization of biomass production of Chlorella minutissima MCC 5 was carried out under different intensities of light, temperatures, concentrations of nitrate and phosphate using Taguchi model. A suitable synergy of the four parameters yielded maximum biomass (1.93 g L(-1)) in airlift reactor. Temperature was found to be relatively effective than other parameters for higher biomass production. Activation energy for the cell growth was determined (47.95 kJ mol(-1)). Among the various (photo, thermal, nitrate and phosphate) stress conditions studied, nitrate limitation (1 mM) was found to be suitable for the enhancement of lipid resulting highest yield (48.26% w/w). Two stage cultivation of the microalgae yielded a maximum lipid content of 46% w/w with a biomass concentration of 2.2 g L(-1). Additionally, FAME analysis exhibited significant increase of oleic acid in the biodiesel. So, C. minutissima MCC 5 cultivated under nitrate stress could be a possible feedstock for biodiesel production. PMID:26922477

  12. Cultivation of algae consortium in a dairy farm wastewater for biodiesel production

    Directory of Open Access Journals (Sweden)

    S. Hena

    2015-06-01

    Full Text Available Dairy farm wastewaters are potential resources for production of microalgae biofuels. A study was conducted to evaluate the capability of production of biodiesel from consortium of native microalgae culture in dairy farm treated wastewater. Native algal strains were isolated from dairy farm wastewaters collection tank (untreated wastewater as well as from holding tank (treated wastewater. The consortium members were selected on the basis of fluorescence response after treating with Nile red reagent. Preliminary studies of two commercial and consortium of ten native strains of algae showed good growth in wastewaters. A consortium of native strains was found capable to remove more than 98% nutrients from treated wastewater. The biomass production and lipid content of consortium cultivated in treated wastewater were 153.54 t ha−1 year−1 and 16.89%, respectively. 72.70% of algal lipid obtained from consortium could be converted into biodiesel.

  13. Dimethyl carbonate as potential reactant in non-catalytic biodiesel production by supercritical method.

    Science.gov (United States)

    Ilham, Zul; Saka, Shiro

    2009-03-01

    In this study, the non-catalytic supercritical method has been studied in utilizing dimethyl carbonate. It was demonstrated that, the supercritical dimethyl carbonate process without any catalysts applied, converted triglycerides to fatty acid methyl esters with glycerol carbonate and citramalic acid as by-products, while free fatty acids were converted to fatty acid methyl esters with glyoxal. After 12 min of reaction at 350 degrees C/20 MPa, rapeseed oil treated with supercritical dimethyl carbonate reached 94% (w/w) yield of fatty acid methyl ester. The by-products from this process which are glycerol carbonate and citramalic acid are much higher in value than glycerol produced by the conventional process. In addition, the yield of the fatty acid methyl esters as biodiesel was almost at par with supercritical methanol method. Therefore, supercritical dimethyl carbonate process can be a good candidate as an alternative biodiesel production process. PMID:18990561

  14. Energy analysis for the production of biodiesel in a spiral reactor using supercritical tert-butyl methyl ether (MTBE).

    Science.gov (United States)

    Farobie, Obie; Matsumura, Yukihiko

    2015-11-01

    In this study, energy analysis was conducted for the production of biodiesel in a spiral reactor using supercritical tert-butyl methyl ether (MTBE). This study aims to determine the net energy ratio (NER) and energy efficiency for the production of biodiesel using supercritical MTBE and to verify the effectiveness of the spiral reactor in terms of heat recovery efficiency. The analysis results revealed that the NER for this process was 0.92. Meanwhile, the energy efficiency was 0.98, indicating that the production of biodiesel in a spiral reactor using supercritical MTBE is an energy-efficient process. By comparing the energy supply required for biodiesel production between spiral and conventional reactors, the spiral reactor was more efficient than the conventional reactor.

  15. Dual uses of microalgal biomass: An integrative approach for biohydrogen and biodiesel production

    International Nuclear Information System (INIS)

    Highlights: • Chlorella sp. NBRI029 and Scenedesmus sp. NBRI012 shows high biomass productivity. • Scenedesmus sp. NBRI012 shows maximum H2 evolution in 6th day of fermentation. • Residual biomass after H2 production contains high lipid content. • Lipid extracted from the residual biomass fulfills various biodiesel properties. - Abstract: Dual application of biomass for biohydrogen and biodiesel production could be considered a feasible option for economic and sustainable energy production from microalgae. In this study, after a large screening of fresh water microalgal isolates, Scenedesmus sp. NBRI012 and Chlorella sp. NBRI029 have exhibited high biomass (1.31 ± 0.11 and 2.62 ± 0.13 g/L respectively) and lipid (244.44 ± 12.3 and 587.38 ± 20.2 mg/L respectively) yield with an organic carbon (acetate) source. Scenedesmus sp. NBRI012 has shown the highest H2 (maximum evolution of 17.72% v/v H2 of total gases) production; it produced H2 continuously for seven days in sulfur-deprived TAP media. Sulfur deprivation during the H2 production was found to increase the lipid content (410.03 ± 18.5 mg/L) of the residual biomass. Fatty acid profile of the lipid extracted from the residual biomass of Scenedesmus sp. NBRI012 has showed abundance of fatty acids with a carbon chain length of C16 and C18. Cetane number, iodine value, and saponification value of biodiesel were found suitable according to the range given by the Indian standard (IS 15607), Brazilian National Petroleum Agency (ANP255) and the European biodiesel standard EN14214

  16. Life cycle assessment of sugarcane ethanol and palm oil biodiesel joint production

    International Nuclear Information System (INIS)

    Sugarcane (Saccharum spp.) and palm tree (Elaeis guianeensis) are crops with high biofuel yields, 7.6 m3 ha−1 y−1 of ethanol and 4 Mg ha−1 y−1 of oil, respectively. The joint production of these crops enhances the sustainability of ethanol. The objective of this work was comparing a traditional sugarcane ethanol production system (TSES) with a joint production system (JSEB), in which ethanol and biodiesel are produced at the same biorefinery but only ethanol is traded. The comparison is based on ISO 14.040:2006 and ISO 14044:2006, and appropriate indicators. Production systems in Cerrado (typical savannah), Cerradão (woody savannah) and pastureland ecosystems were considered. Energy and carbon balances, and land use change impacts were evaluated. The joint system includes 100% substitution of biodiesel for diesel, which is all consumed in different cropping stages. Data were collected by direct field observation methods, and questionnaires applied to Brazilian facilities. Three sugarcane mills situated in São Paulo State and one palm oil refinery located in Para State were surveyed. The information was supplemented by secondary sources. Results demonstrated that fossil fuel use and greenhouse gas emissions decreased, whereas energy efficiency increased when JSEB was compared to TSES. In comparison with TSES, the energy balance of JSEB was 1.7 greater. In addition, JSEB released 23% fewer GHG emissions than TSES. The ecosystem carbon payback time for Cerrado, Cerradão, and Degraded Grassland of JSEB was respectively 4, 7.7 and −7.6 years. These are typical land use types of the Brazilian Cerrado region for which JSEB was conceived. -- Highlights: ► LCA of ethanol and biodiesel joint production system. ► Sugarcane based biorefinery assessment in Brazil. ► Original Brazilian LCI data on ethanol and palm oil biodiesel production. ► Biofuel LCA with LUC sensitivity analisis for the Brazilian Cerrado Region.

  17. Screening of freshwater and seawater microalgae strains in fully controlled photobioreactors for biodiesel production.

    Science.gov (United States)

    Taleb, A; Kandilian, R; Touchard, R; Montalescot, V; Rinaldi, T; Taha, S; Takache, H; Marchal, L; Legrand, J; Pruvost, J

    2016-10-01

    Strain selection is one of the primary hurdles facing cost-effective microalgal biodiesel production. Indeed, the strain used affects both upstream and downstream biodiesel production processes. This study presents a screening procedure that considers the most significant criteria in microalgal biodiesel production including TAG production and wet extraction and recovery of TAGs. Fourteen freshwater and seawater strains were investigated. Large variation was observed between the strains in all the screening criteria. The overall screening procedure ultimately led to the identification of Parachlorella kessleri UTEX2229 and Nannochloropsis gaditana CCMP527 as the best freshwater and seawater strains, respectively. They featured the largest areal TAG productivity equal to 2.7×10(-3) and 2.3×10(-3)kgm(-2)d(-1), respectively. These two strains also displayed encouraging cell fragility in a high pressure bead milling process with 69% and 98% cell disruption at 1750bar making them remarkable strains for TAG extraction in wet environment. PMID:27394994

  18. Simultaneous improvement in production of microalgal biodiesel and high-value alpha-linolenic acid by a single regulator acetylcholine

    OpenAIRE

    Parsaeimehr, Ali; Sun, Zhilan; Dou, Xiao; Chen, Yi-Feng

    2015-01-01

    Background Photoautotrophic microalgae are a promising avenue for sustained biodiesel production, but are compromised by low yields of biomass and lipids at present. We are developing a chemical approach to improve microalgal accumulation of feedstock lipids as well as high-value alpha-linolenic acid which in turn might provide a driving force for biodiesel production. Results We demonstrate the effectiveness of the small bioactive molecule “acetylcholine” on accumulation of biomass, total li...

  19. Biodiesel production from microalgal isolates of southern Pakistan and quantification of FAMEs by GC-MS/MS analysis

    OpenAIRE

    Musharraf Syed; Ahmed Muhammad; Zehra Noureen; Kabir Nurul; Choudhary M; Rahman Atta-ur

    2012-01-01

    Abstract Background Microalgae have attracted major interest as a sustainable source for biodiesel production on commercial scale. This paper describes the screening of six microalgal species, Scenedesmus quadricauda, Scenedesmus acuminatus, Nannochloropsis sp., Anabaena sp., Chlorella sp. and Oscillatoria sp., isolated from fresh and marine water resources of southern Pakistan for biodiesel production and the GC-MS/MS analysis of their fatty acid methyl esters (FAMEs). Results Growth rate, b...

  20. Biodiesel production from waste cooking oil via alkali catalyst and its engine test

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Xiangmei [Faculty of Environmental Science and Engineering Tianjin University, Tianjin 300072 (China); Energy Research Institute of Shandong Academy of Sciences, Shandong Jinan, 250014 (China); Chen, Guanyi [Faculty of Environmental Science and Engineering Tianjin University, Tianjin 300072 (China); Wang, Yonghong [China Architecture Design and Research Group, Beijing, 100044 (China)

    2008-09-15

    Waste cooking oils (WCO), which contain large amounts of free fatty acids produced in restaurants, are collected by the environmental protection agency in the main cities of China and should be disposed in a suitable way. Biodiesel production from WCO was studied in this paper through experimental investigation of reaction conditions such as methanol/oil molar ratio, alkaline catalyst amount, reaction time and reaction temperature which are deemed to have main impact on reaction conversion efficiency. Experiments have been performed to determine the optimum conditions for this transesterification process by orthogonal analysis of parameters in a four-factor and three-level test. The optimum experimental conditions, which were obtained from the orthogonal test, were methanol/oil molar ratio 9:1, with 1.0 wt.% sodium hydroxide, temperature of 50 C and 90 min. Verified experiments showed methanol/oil molar ratio 6:1 was more suitable in the process, and under that condition WCO conversion efficiency led to 89.8% and the physical and chemical properties of biodiesel sample satisfied the requirement of relevant international standards. After the analysis main characteristics of biodiese sample, the impact of biodiesel/diesel blend fuels on an YC6M220G turbo-charge diesel engine exhaust emissions was evaluated compared with 0 diesel. The testing results show without any modification to diesel engine, under all conditions dynamical performance kept normal, and the B20, B50 blend fuels (include 20%, 50% crude biodiesel respectively) led to unsatisfactory emissions whilst the B'20 blend fuel (include 20% refined biodiesel) reduced significantly particles, HC and CO etc. emissions. For example CO, HC and particles were reduced by 18.6%, 26.7% and 20.58%, respectively. (author)

  1. Process optimization and kinetics of biodiesel production from neem oil using copper doped zinc oxide heterogeneous nanocatalyst.

    Science.gov (United States)

    Gurunathan, Baskar; Ravi, Aiswarya

    2015-08-01

    Heterogeneous nanocatalyst has become the choice of researchers for better transesterification of vegetable oils to biodiesel. In the present study, transesterification reaction was optimized and kinetics was studied for biodiesel production from neem oil using CZO nanocatalyst. The highly porous and non-uniform surface of the CZO nanocatalyst was confirmed by AFM analysis, which leads to the aggregation of CZO nanoparticles in the form of multi layered nanostructures. The 97.18% biodiesel yield was obtained in 60min reaction time at 55°C using 10% (w/w) CZO nanocatalyst and 1:10 (v:v) oil:methanol ratio. Biodiesel yield of 73.95% was obtained using recycled nanocatalyst in sixth cycle. The obtained biodiesel was confirmed using GC-MS and (1)H NMR analysis. Reaction kinetic models were tested on biodiesel production, first order kinetic model was found fit with experimental data (R(2)=0.9452). The activation energy of 233.88kJ/mol was required for transesterification of neem oil into biodiesel using CZO nanocatalyst. PMID:25958133

  2. Process optimization and kinetics of biodiesel production from neem oil using copper doped zinc oxide heterogeneous nanocatalyst.

    Science.gov (United States)

    Gurunathan, Baskar; Ravi, Aiswarya

    2015-08-01

    Heterogeneous nanocatalyst has become the choice of researchers for better transesterification of vegetable oils to biodiesel. In the present study, transesterification reaction was optimized and kinetics was studied for biodiesel production from neem oil using CZO nanocatalyst. The highly porous and non-uniform surface of the CZO nanocatalyst was confirmed by AFM analysis, which leads to the aggregation of CZO nanoparticles in the form of multi layered nanostructures. The 97.18% biodiesel yield was obtained in 60min reaction time at 55°C using 10% (w/w) CZO nanocatalyst and 1:10 (v:v) oil:methanol ratio. Biodiesel yield of 73.95% was obtained using recycled nanocatalyst in sixth cycle. The obtained biodiesel was confirmed using GC-MS and (1)H NMR analysis. Reaction kinetic models were tested on biodiesel production, first order kinetic model was found fit with experimental data (R(2)=0.9452). The activation energy of 233.88kJ/mol was required for transesterification of neem oil into biodiesel using CZO nanocatalyst.

  3. Production of Truncated Candida antarctica Lipase B Gene Using Automated PCR Gene Assembly Protocol and Expression in Yeast for use in Ethanol and Biodiesel Production.

    Science.gov (United States)

    An improved column-based process for production of biodiesel was developed using a column containing a strongly basic anion-exchange resin in sequence with a column containing a resin to which a lipase biocatalyst is bound. Currently most biodiesel is produced by transesterification of triglyceride...

  4. Life-cycle greenhouse gas emissions and energy balances of a biodiesel production from palm fatty acid distillate (PFAD)

    International Nuclear Information System (INIS)

    Highlights: • The LCA study of biodiesel production from palm fatty acid distillate was performed. • The reduction ratio of GHG emissions to fossil diesel is found to amount to 86.5%. • The net energy ratio is found to be 3.23. - Abstract: Life-cycle greenhouse gas (GHG) emissions and net energy ratio (NER) have been evaluated for the production of palm biodiesel from palm fatty acid distillate (PFAD) which is a by-product in the refining process. For the case that PFAD is regarded as a processing residue, GHG emissions associated with biodiesel production in the considered process is 86.5% less than that of fossil diesel, which surpasses even the threshold of year 2018 of the Renewable Energy Directive (RED) of the European Union (EU). In the present study, it is also shown that the value of the NER is 3.23, which means that the energy yield from palm methyl ester (PME) production from PFAD is around three times larger than the input of fossil energy in the production. In conclusion, the palm biodiesel from PFAD can be one of various alternatives to the ‘conventional’ palm biodiesel which is made of refined palm oil, and sustainability issues and ethical problems can be considerably minimized with the strategic utilization of palm biodiesel produced from PFAD

  5. PREPARATION AND CHARACTERIZATION OF SULFATED ZIRCONIA FOR BIODIESEL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Heri Rustamaji

    2012-05-01

    Full Text Available Sulfated zirconia has been prepared and characterized by X-ray diffraction, infrared spectroscopy, BET surface area, and BJH pore distribution methods. XRD patterns reveal that the sulfated zirconia mainly consists of tetragonal crystalline zirconia with average size of about 9.8 nm. N2 adsorption data show that the nanosized sulfated zirconia has high surface area (109.4 m2/g and shows the uniform pore distribution aggregated by zirconia nanoparticles. Sulfated zirconias were used as catalysts in the alcoholysis of jatropha oil. The conversions of jatropha oil alcoholysis under good conditions (120oC, 2 h, 3 wt% of catalyst and 1000 rpm agitation speed were 79.65%.  Abstrak PREPARASI DAN KARAKTERISASI ZIRKONIA TERSULFATASI SEBAGAI KATALISATOR DALAM PEMBUATAN BIODIESEL. Zirkonia tersulfatasi berhasil dibuat dan dikarakterisasi dengan difraksi sinar X, spektroskopi inframerah, pengukuran luas permukaan dengan metode BET dan dan pengukuran distribusi pori dengan metode BJH. Pola difraksi sinar X menunjukkan bahwa susunan utama zirkonia tersulfatasi terdiri atas kristal zirkonia tetragonal dengan ukuran pori rata-rata sekitar 9,8 nm. Data adsorpsi N2 menunjukkan bahwa zirkonia tersulfatasi yang berukuran nano memiliki luas permukaan yang tinggi (109,4 m2/g dan memiliki distribusi ukuran pori yang seragam. Zirkonia tersulfatasi digunakan sebagai katalisator dalam reaksi alkoholisis minyak jarak pagar dengan konversi pada kondisi yang relatif baik (120oC, 2 jam, 3% berat katalis dan kecepatan pengadukan 1000 rpm sebesar 79,65%.

  6. Screening of Industrial Wastewaters as Feedstock for the Microbial Production of Oils for Biodiesel Production and High-Quality Pigments

    Directory of Open Access Journals (Sweden)

    Teresa Schneider

    2012-01-01

    Full Text Available The production of biodiesel has notably increased over the past decade. Currently, plant oil is the main feedstock for biodiesel production, but, due to concerns related to the competition with food production, alternative oil feedstocks have to be found. Oleaginous yeasts are known to produce high amounts of lipids, but no integrated process from microbial fermentation to final biodiesel production has reached commercial realization yet due to economic constraints. Therefore, growth and lipid production of red yeast Rhodotorula glutinis was tested on low-cost substrates, namely, wastewaters from potato, fruit juice, and lettuce processing. Additionally, the production of carotenoids as high-value by-products was examined. All evaluated wastewaters met the general criteria for microbial lipid production. However, no significant increase in lipid content was observed, probably due to lack of available carbon in wastewaters from fruit juice and lettuce processing, and excess of available nitrogen in potato processing wastewater, respectively. During growth on wastewaters from fruit juice and lettuce processing the carotenoid content increased significantly in the first 48 hours. The relations between carbon content, nitrogen content, and carotenoid production need to be further assessed. For economic viability, lipid and carotenoid production needs to be increased significantly. The screening of feedstocks should be extended to other wastewaters.

  7. Esterification of glycerol from biodiesel production to glycerol carbonate in non-catalytic supercritical dimethyl carbonate.

    Science.gov (United States)

    Ilham, Zul; Saka, Shiro

    2016-01-01

    Conversion of glycerol from biodiesel production to glycerol carbonate was studied by esterification with dimethyl carbonate in a non-catalytic supercritical condition. It was found that in a non-catalytic supercritical condition, glycerol at higher purity gave higher yield of glycerol carbonate at 98 wt% after reaction at 300 °C/20-40 MPa/15 min. The yield of glycerol carbonate was observed to increase with molar ratio, temperature, pressure and time until a certain equilibrium limit. The existence of impurities such as water and remnants of alkaline catalyst in crude glycerol will direct the reaction to produce glycidol. Although impurities might not be desirable, the non-catalytic supercritical dimethyl carbonate could be an alternative method for conversion of glycerol from biodiesel production to value-added glycerol carbonate.Graphical abstractPlausible reaction scheme for conversion of glycerol to glycerol carbonate in non-catalytic supercritical dimethyl carbonate. PMID:27386367

  8. Decanter cake as a feedstock for biodiesel production: A first report

    International Nuclear Information System (INIS)

    Highlights: • Decanter cake as a potential waste feedstock for biodiesel production. • Ultrasound-aided transesterification achieving nearly 86% conversion in 1 h. • Boiler ash, a waste product, was successfully used as a catalyst. - Abstract: Decanter cake (DC), with an oil content of 11.5 ± 0.18 wt.%, was subjected to ultrasound-aided transesterification using boiler ash as a base catalyst, petroleum ether and hexane as co-solvents. Optimization work revealed that at MeOH:oil mass ratio of 6:1 and 2.3 wt.% catalyst (based on DC weight) with 1:2 co-solvents:DC mass ratio as the optimal reaction conditions. Both decanter cake and boiler ash, waste materials from oil palm mill, were successfully utilized to produce methyl ester (biodiesel) with highest conversion of 85.9 wt.% in a 1 h reaction period at 55 °C

  9. In vitro degradation and total gas production of byproducts generated in the biodiesel production chain

    OpenAIRE

    Raissa Kiara oliveira de Morais; Aderbal Marcos de Azevedo Silva; Leilson Rocha Bezerra; Heloisa Carneio; Milenna Nunes Moreira; Fabiola Franklin de Medeiros

    2015-01-01

    This study aimed to evaluate the in vitro degradation and total gas production of different oil seed press cakes from a biodiesel production chain gas through the use of a semi-automatic technique of gas production in vitro. The treatments consisted of substituting elephant grass in increasing levels, 0%, 30, 50 and 70%, with the byproducts of Gossyypium hirsutum, Ricinus communis, Moringa oleifeira, Jatropha curcas and Helianthus annus. The oil seed press cakes of Moringa oleifeira had the h...

  10. French bio-diesel demand and promoting measures analysis by 2010

    International Nuclear Information System (INIS)

    The researches presented aim at assessing bio-diesel promoting measures under consideration in France by 2010. This assessment is based on a deep study of French bio-diesel demand. The use of a linear model for optimizing the whole French refining industry costs allow us to take into account the physicochemical characteristics of bio-diesel useful for gas oil blending operation. This researches show that bio-diesel can be incorporated up to 27% blend in volume to diesel fuel without major technical problem. A decomposition of the value allotted to the bio-diesel by French refiners according to its physicochemical characteristics shows that energy content is the most disadvantageous characteristics for bio-diesel incorporation and, up to 17%, density become also constraining. However, the low bio-diesel sulphur content could become interesting from now to 2010. On the basis of this bio-diesel demand analysis, we proceed to an external coupling of an agro-industrial model of bio-diesel supply with the French refining model. Thus, we study the impact of the 2010 French bio-diesel consumption objective on agricultural surface need, the competitiveness of the bio-diesel, the reduction of greenhouse gases emissions and the trade balance of the petroleum products. On this basis, we propose a critical analysis of French bio-diesel promoting measures under consideration by 2010. (author)

  11. Detection of the presence of used frying oil as raw material in biodiesel production

    Directory of Open Access Journals (Sweden)

    Dobarganes, M. C.

    2008-12-01

    Full Text Available The detection of compounds giving information on the use of used frying oils as raw material in the production of biodiesel is of interest to guarantee the quality of the product. In this study, the most characteristic groups of compounds formed after used frying oil transesterification were analyzed by means of the standard technique using gas chromatography at a high temperature (EN 14105. Dimeric fatty acid methyl esters (dimeric FAME is the most important group to be considered as they are present in significant amounts after used frying oil transesterification. On the other hand, they are absent in the bleached oils used for biodiesel production. The concentration of the dimeric FAME in the polar fraction of biodiesel, easily obtained by adsorption chromatography, allowed detection of this group of compounds even in very low concentrations.La detección de compuestos característicos de los aceites de fritura usados como materia prima de bajo coste en la obtención de biodiesel, es de interés para garantizar su calidad. En este estudio, se analizan los grupos de compuestos más característicos obtenidos tras la transesterificación de los aceites de fritura mediante la técnica estándar que utiliza cromatografía de gases a temperatura elevada (European Standard EN 14105. Los dímeros de ésteres metílicos son los compuestos más importantes para detectar el aceite de fritura como materia prima, debido a su presencia en cantidades significativas después de la transesterificación de los aceites de fritura y a su ausencia en los aceites decolorados que se utilizan en la obtención de biodiesel. La concentración de los dímeros en la fracción polar del biodiesel, fácilmente obtenida mediante cromatografía de adsorción, permite detectar los citados compuestos incluso a concentraciones muy bajas.

  12. In vitro degradation and total gas production of byproducts generated in the biodiesel production chain

    Directory of Open Access Journals (Sweden)

    Raissa Kiara oliveira de Morais

    2015-05-01

    Full Text Available This study aimed to evaluate the in vitro degradation and total gas production of different oil seed press cakes from a biodiesel production chain gas through the use of a semi-automatic technique of gas production in vitro. The treatments consisted of substituting elephant grass in increasing levels, 0%, 30, 50 and 70%, with the byproducts of Gossyypium hirsutum, Ricinus communis, Moringa oleifeira, Jatropha curcas and Helianthus annus. The oil seed press cakes of Moringa oleifeira had the highest rate of in vitro degradation of dry matter compared with other foods but did not result in a higher final volume of gases production. Gossyypium hirsutum, Pinhão manso curcas and Ricinus communis showed a higher in vitro degradability of similar dry matter. The highest total gas production was obtained by the oil seed press cakes of Helianthus annus. The oil seed press cakes of Moringa oleifeira can replace elephant grass up to 70% and therefore reduce both greenhouse gas emissions and energy loss for the animal.

  13. Biochemical Modulation of Lipid Pathway in Microalgae Dunaliella sp. for Biodiesel Production

    OpenAIRE

    Ahmad Farhad Talebi; Masoud Tohidfar; Seyedeh Mahsa Mousavi Derazmahalleh; Alawi Sulaiman; Azhari Samsu Baharuddin,; Meisam Tabatabaei

    2015-01-01

    Exploitation of renewable sources of energy such as algal biodiesel could turn energy supplies problem around. Studies on a locally isolated strain of Dunaliella sp. showed that the mean lipid content in cultures enriched by 200 mg L−1 myoinositol was raised by around 33% (1.5 times higher than the control). Similarly, higher lipid productivity values were achieved in cultures treated by 100 and 200 mg L−1 myoinositol. Fluorometry analyses (microplate fluorescence and flow cytometry) revealed...

  14. Simulation study of the production of biodiesel using feedstock mixtures of fatty acids in complex reactive distillation columns

    International Nuclear Information System (INIS)

    Biodiesel can be produced from a number of natural, renewable sources, but vegetable oils are the main feedstocks. The current manufacturing biodiesel processes, however, have several disadvantages: expensive separation of products from the reaction mixture, and high costs due to relatively complex processes involving one to two reactors and several separation units. Therefore, to solve these problems, in recent years several researchers have developed a sustainable biodiesel production process based on reactive distillation. In this paper the production of biodiesel using feedstock mixtures of fatty acids is explored using reactive distillation sequences with thermal coupling. The results indicate that the complex reactive distillation sequences can produce a mixture of esters as bottoms product that can be used as biodiesel. In particular, the thermally coupled distillation sequence involving a side rectifier can handle the reaction and complete separation in accordance with process intensification principles. -- Highlights: ► Production of biodiesel using thermally coupled distillation sequences without reboilers. ► Esterification of fatty organic acids using reactive distillation. ► Carnot’s factor in reactive distillation.

  15. Biodiesel Production by Aspergillus niger Lipase Immobilized on Barium Ferrite Magnetic Nanoparticles

    Directory of Open Access Journals (Sweden)

    Ahmed I. El-Batal

    2016-05-01

    Full Text Available In this study, Aspergillus niger ADM110 fungi was gamma irradiated to produce lipase enzyme and then immobilized onto magnetic barium ferrite nanoparticles (BFN for biodiesel production. BFN were prepared by the citrate sol-gel auto-combustion method and characterized by transmission electron microscopy (TEM, X-ray diffraction (XRD, Fourier transform infrared (FTIR and scanning electron microscopy with energy dispersive analysis of X-ray (SEM/EDAX analysis. The activities of free and immobilized lipase were measured at various pH and temperature values. The results indicate that BFN–Lipase (5% can be reused in biodiesel production without any treatment with 17% loss of activity after five cycles and 66% loss in activity in the sixth cycle. The optimum reaction conditions for biodiesel production from waste cooking oil (WCO using lipase immobilized onto BFN as a catalyst were 45 °C, 4 h and 400 rpm. Acid values of WCO and fatty acid methyl esters (FAMEs were 1.90 and 0.182 (mg KOH/g oil, respectively. The measured flash point, calorific value and cetane number were 188 °C, 43.1 MJ/Kg and 59.5, respectively. The cloud point (−3 °C, pour point (−9 °C, water content (0.091% and sulfur content (0.050%, were estimated as well.

  16. Numerical investigation of a bubble-column photo-bioreactor design for biodiesel production from microalgae

    Energy Technology Data Exchange (ETDEWEB)

    Seo, I.H.; Lee, I.B.; Hwang, H.S.; Hong, S.W.; Bitog, J.P.; Kwon, K.S.; Choi, J.S.; Song, S.H. [Seoul National Univ., Seoul (Korea, Democratic People' s Republic of). Dept. of Rural Systems Engineering and Research Inst. for Agriculture and Life Sciences

    2010-07-01

    Biodiesel made from vegetable oil is among the most desirable of renewable energy sources because it can be a substitute for diesel oil. However, biodiesel from soybean or corn can be confronted with a food crisis. Microalgae is a new biodiesel source which contains high oil lipids with a high growth rate, and which also offers value-added products from the residue, such as cosmetics, health functional food or pharmaceuticals. Microalgae are best cultivated in photo-bioreactors (PBRs) where light, nutrients, carbon dioxide and temperature can be controlled. Despite the current availability of PBRs, only a few can be practically used for mass production. Computational fluid dynamics (CFD) was used in this study to design an optimum bubble-column PBR for mass production of microalgae. Multi-phase models including bubble movement, meshes and time step independent tests were considered to develop the 3-dimensional CFD model. Particle Image Velocimetry (PIV) tests were used to enhance and validate the model. Different types of PBRs were simulated and compared quantitatively with the microalgae's growth model.

  17. Seed Oil from Ten Algerian Peanut Landraces for Edible Use and Biodiesel Production.

    Science.gov (United States)

    Giuffrè, Angelo Maria; Tellah, Sihem; Capocasale, Marco; Zappia, Clotilde; Latati, Mourad; Badiani, Maurizio; Ounane, Sidi Mohamed

    2016-01-01

    As a result of a recent ad hoc prospection of the Algerian territory, a collection of peanut (groundnut; Arachis hypogaea L.) landraces was established, covering a remarkable array of diversity in terms of morphological and physiological features, as well as of adaptation to local bioclimatic conditions. In the present work, the oils extracted from the seeds of these landraces were evaluated in terms of edible properties and suitability for biodiesel production. As for edible use, a low free acidity (ranging from 0.62 to 1.21%) and a high oleic acid content (44.61-50.94%) were common features, although a poor stability to oxidation [high peroxide values, high spectrophotometric indices, and low % of inhibition in the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH)· test] was observed in a few cases. As for biodiesel production, low values of acidity [1.23-2.40 mg KOH (g oil)(-1)], low iodine values [90.70-101.54 g I2 (g oil)(-1)], high cetane numbers (56.95-58.88) and high calorific values (higher heating value 37.34-39.27 MJ kg(-1)) were measured. Edible properties and suitability for biodiesel production were discussed with respect to the German standard DIN 51605 for rapeseed oil and to the EN 14214 standard, respectively. One way ANOVA and Hierarchical Cluster Analysis showed significant differences among the oils from the Algerian peanut landraces.

  18. Penicillium expansum lipase-catalyzed production of biodiesel in ionic liquids.

    Science.gov (United States)

    Zhang, Kai-Pei; Lai, Jing-Qi; Huang, Ze-Lin; Yang, Zhen

    2011-02-01

    Penicillium expansum lipase (PEL) was used to catalyze biodiesel production from corn oil in [BMIm][PF(6)](1) (an ionic liquid, IL) and tert-butanol. Both systems were optimized in terms of MeOH/oil molar ratio, reaction temperature, enzyme loading, solvent volume, and water content. The high conversion obtained in the IL (86%) as compared to that in tert-butanol (52%) demonstrates that the IL is a superior solvent for PEL-catalyzed biodiesel production. Poor yields were obtained in a series of hydrophilic ILs. Addition of salt hydrates affected biodiesel production predominantly through the specific ion (Hofmeister) effect. The impact of methanol on both activity and stability of PEL in the IL and in hexane was investigated, in comparison to the results obtained by two commonly used lipases, Novozym 435 and Lipozyme TLIM. The results substantiate that while different lipases show different resistance to methanol in different reaction systems, PEL is tolerant to methanol in both systems. PMID:21138789

  19. Dyeing Industry Effluent System as Lipid Production Medium of Neochloris sp. for Biodiesel Feedstock Preparation

    Directory of Open Access Journals (Sweden)

    Vidyadharani Gopalakrishnan

    2014-01-01

    Full Text Available Microalgae lipid feedstock preparation cost was an important factor in increasing biodiesel fuel hikes. This study was conducted with the concept of implementing an effluent wastewater as lipid production medium for microalgae cultivation. In our study textile dyeing industry effluent was taken as a lipid production medium for Neochloris sp. cultivation. The changes in physicochemical analysis of effluent before and after Neochloris sp. treatment were recorded using standard procedures and AAS analysis. There was especially a reduction in heavy metal like lead (Pb concentration from 0.002 ppm to 0.001 ppm after Neochloris sp. treatment. Neochloris sp. cultivated in Bold Basal Medium (BBM (specific algal medium produced 41.93% total lipid and 36.69% lipid was produced in effluent based cultivation. Surprisingly Neochloris sp. cultivated in effluent was found with enhanced neutral lipid content, and it was confirmed by Nile red fluorescence assay. Further the particular enrichment in oleic acid content of the cells was confirmed with thin layer chromatography (TLC with oleic acid pure (98% control. The overall results suggested that textile dyeing industry effluent could serve as the best lipid productive medium for Neochloris sp. biodiesel feedstock preparation. This study was found to have a significant impact on reducing the biodiesel feedstock preparation cost with simultaneous lipid induction by heavy metal stress to microalgae.

  20. Productivity Measurement Of Technical Institute

    Directory of Open Access Journals (Sweden)

    Miss.Pooja Yadav

    2015-05-01

    Full Text Available Abstract The increasing concern over globalization between other things has made the achievement of lifetime skills vital for all classes of people. Achievement of such skills can be developed from technical education programs in the advance of any nation. Skill gaining provides knowledge and inculcates the approaches that are essential for arrival and progress into an occupation. When skills are developed in any occupation it will provide and improve the standard of living with the cover beside poverty thereby behind national development. This paper observes sampling distribution and moving average concept that how technical education can generate the required skills the significance of skill acquisition its roles benefits and sustainability in national development. It also mentions among others that government should look into and improve productivity that can encourage skill achievement for the youths. The solutions are divided the sampling box into few group before stacking up workstation and use table and some other wood product. Cost reduction for each solution was intended and the solution with highest cost decrease is chosen to increase the productivity of the college.

  1. Used frying oil biodiesel production: experimental factorial design and multivariate analysis

    Directory of Open Access Journals (Sweden)

    Rosana de Cassia de Souza Schneider

    2009-01-01

    Full Text Available Biodiesel é derivado de fontes renováveis ereduz significativamente as emissões atmosféricas. Pode serobtido de diversos processos, como a alcoolise. Nestetrabalho, o biodiesel foi produzido através da alcoolise doóleo de fritura usado de indústrias de alimentação. Umplanejamento experimental foi utilizado e os produtos dereação foram analisados por cromatografia gasosa (CGespectroscopia na região do infravermelho com acessório dereflexão total atenuada horizontal (IV-HATR e análiseexploratória por análise de componentes principais (PCA eanálise hierárquica de grupos (HCA. De acordo com ascondições analisadas obteve-se alta conversão em ésteresmetílicos. Por IV-HATR, a conversão máxima foi observadaem condições experimentais de temperatura ( 50 e 60°C,concentração de catalisador (0,6 e 1,2% e a 1:8 de relaçãomolar entre óleo e metanol. Também foi possíveldiscriminar por análise quimiométrica, 4 grupos noplanejamento experimental e determinar as melhorescondições para a produção de biodiesel de óleo de friturausado.Abstract Biodiesel is derived from renewable sources and it significantly reduces atmospheric emissions. It can be obtained byseveral processes, such as alcoholysis. In this work, biodiesel was produced through alcoholysis of used frying oil from a cateringbusiness. An experimental factorial design was used and the reaction products were analyzed through gas chromatography (GC,horizontal attenuated total reflection Fourier transform infrared (HATR/FT-IR spectroscopy and exploratory analysis withprincipal component analysis (PCA and hierarchical cluster analysis (HCA. Under the conditions analyzed, a high degree ofconversion to methyl ester was found. As shown by HATR/FT-IR, the maximum conversion was obtained when the experimentalconditions had the temperature ( 50 e 60°C, largest catalyst concentration (0,6 e 1,2% and a 1:8 molar proportion of oil tomethanol. It was possible to discriminate

  2. Biodiesel production by two-stage transesterification with ethanol by washing with neutral water and water saturated with carbon dioxide.

    Science.gov (United States)

    Mendow, G; Veizaga, N S; Sánchez, B S; Querini, C A

    2012-08-01

    Industrial production of ethyl esters is impeded by difficulties in purifying the product due to high amounts of soap formed during transesterification. A simple biodiesel wash process was developed that allows successful purification of samples containing high amounts of soap. The key step was a first washing with neutral water, which removed the soaps without increasing the acidity or affecting the process yield. Afterward, the biodiesel was washed with water saturated with CO(2), a mild acid that neutralized the remaining soaps and extracted impurities. The acidity, free-glycerine, methanol and soaps concentrations were reduced to very low levels with high efficiency, and using non-corrosive acids. Independently of the initial acidity, it was possible to obtain biodiesel within EN14214 specifications. The process included the recovery of soaps by hydrolysis and esterification, making it possible to obtain the theoretical maximum amount of biodiesel.

  3. A comparative study of biodiesel production using methanol, ethanol, and tert-butyl methyl ether (MTBE) under supercritical conditions.

    Science.gov (United States)

    Farobie, Obie; Matsumura, Yukihiko

    2015-09-01

    In this study, biodiesel production under supercritical conditions among methanol, ethanol, and tert-butyl methyl ether (MTBE) was compared in order to elucidate the differences in their reaction behavior. A continuous reactor was employed, and experiments were conducted at various reaction temperatures (270-400 °C) and reaction times (3-30 min) and at a fixed pressure of 20 MPa and an oil-to-reactant molar ratio of 1:40. The results showed that under the same reaction conditions, the supercritical methanol method provided the highest yield of biodiesel. At 350 °C and 20 MPa, canola oil was completely converted to biodiesel after 10, 30, and 30 min in the case of - supercritical methanol, ethanol, and MTBE, respectively. The reaction kinetics of biodiesel production was also compared for supercritical methanol, ethanol, and MTBE.

  4. In situ self-catalyzed reactive extraction of germinated oilseed with short-chained dialkyl carbonates for biodiesel production.

    Science.gov (United States)

    Jiang, Yanjun; Li, Dan; Li, Yang; Gao, Jing; Zhou, Liya; He, Ying

    2013-12-01

    In order to eliminate the expense associated with solvent extraction and oil cleanup, and reduce the processing steps in biodiesel production, reactive extraction has become a focus of research in recent years. In this study, germinated castor seed was used as substrate and catalyst, dimethyl carbonate (DMC) was used as acyl acceptor and oil extractant to produce biodiesel. The optimum conditions were as follows: the germination time of castor seed was 72 h, DMC/germinated seed ratio was 12.5 ml/g, reaction temperature was 35°C, and water content was 2.11%. The biodiesel yield could reach as much as 87.41% under the optimized conditions. This germinated oilseed self-catalyzed reactive extraction can be a promising route for biodiesel production. PMID:24144599

  5. A multi-criteria analysis approach for ranking and selection of microorganisms for the production of oils for biodiesel production.

    Science.gov (United States)

    Ahmad, Farah B; Zhang, Zhanying; Doherty, William O S; O'Hara, Ian M

    2015-08-01

    Oleaginous microorganisms have potential to be used to produce oils as alternative feedstock for biodiesel production. Microalgae (Chlorella protothecoides and Chlorella zofingiensis), yeasts (Cryptococcus albidus and Rhodotorula mucilaginosa), and fungi (Aspergillus oryzae and Mucor plumbeus) were investigated for their ability to produce oil from glucose, xylose and glycerol. Multi-criteria analysis (MCA) using analytic hierarchy process (AHP) and preference ranking organization method for the enrichment of evaluations (PROMETHEE) with graphical analysis for interactive aid (GAIA), was used to rank and select the preferred microorganisms for oil production for biodiesel application. This was based on a number of criteria viz., oil concentration, content, production rate and yield, substrate consumption rate, fatty acids composition, biomass harvesting and nutrient costs. PROMETHEE selected A. oryzae, M. plumbeus and R. mucilaginosa as the most prospective species for oil production. However, further analysis by GAIA Webs identified A. oryzae and M. plumbeus as the best performing microorganisms.

  6. Production of Bio-Diesel to Neem oil and its performance and emission Analysis in two stroke Diesel Engine.

    OpenAIRE

    G.Mahesh BABU; VIKAS KUMAR; ANUPRASAD SG

    2013-01-01

    In India Neem tree is a widely grown up termed as a divine tree due to its wide relevance in many areas of study. This paper deals with Biodiesel production from neem oil, which is monoester produced usingtransesterification process. Biodiesel is a safe alternative fuel to replace traditional petroleum diesel. It has high lubricity, clean burning fuel and can be a fuel component for use in existing unmodified diesel engine. Neem (Azadirachita Indica) is an evergreen tree, which is endemic to ...

  7. Optimizing biodiesel production in marine Chlamydomonas sp. JSC4 through metabolic profiling and an innovative salinity-gradient strategy

    OpenAIRE

    Ho, Shih-Hsin; Nakanishi, Akihito; Ye, Xiaoting; Chang, Jo-Shu; Hara, Kiyotaka; Hasunuma, Tomohisa; Kondo, Akihiko

    2014-01-01

    Background Biodiesel production from marine microalgae has received much attention as microalgae can be cultivated on non-arable land without the use of potable water, and with the additional benefits of mitigating CO2 emissions and yielding biomass. However, there is still a lack of effective operational strategies to promote lipid accumulation in marine microalgae, which are suitable for making biodiesel since they are mainly composed of saturated and monounsaturated fatty acids. Moreover, ...

  8. Survey of Solvent type and drying of biomass effects on lipid extraction from Nannochloropsis Oculata for biodiesel production

    OpenAIRE

    Mohamad Malakootian; Behnam Hatami; Shidvash dolatshahi; Ahmad Rajabzadeh

    2014-01-01

    Background and Objectives: As a green fuel and environmentally friendly energy, biodiesel has recently attracted much attention and efforts are ongoing to optimizing biodiesel production from microalgae’s. The aim of this study was to determine the appropriate method of dewatering and drying biomass and selecting a suitable organic solvent for extraction lipids from biomass. Materials and Methods: After culturing Nannochloropsis Oculata in Gillard F/2 medium and reaching at the end of ...

  9. Biodiesel Production From the Microalgae Nannochloropsis by Microwave Using CaO and MgO Catalysts

    OpenAIRE

    Herman Hindarso; Aylianawati Aylianawati; Martinus Edy Sianto

    2015-01-01

    The needs of world petroleum are increased; in contrast, the fuel productions are getting decreased. Therefore, it has lead to the search for bio-fuel as an alternative energy. There are several different types of biofuel, such as biodiesel, ethanol, bioalcohol, and biogas. Biodiesel is typically made by chemically reacting lipids from a vegetable oil or animal fat with an alcohol producing fatty acid esters, such as methyl or ethyl ester. The present study aimed to study the effect of temper...

  10. Biodiesel production from the lipid of wastewater sludge using an acidic heterogeneous catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Siddiquee, M.N.; Kazemian, H.; Rohani, S. [University of Western Ontario, Department of Chemical and Biochemical Engineering, London, ON (Canada)

    2011-12-15

    The production of biodiesel from the lipid of wastewater sludge was studied using SBA-15 impregnated with the heteropolyacid H{sub 3}PO{sub 4}.12WO{sub 3}.xH{sub 2}O (PW{sub 12}) as a mesoporous heterogeneous catalyst. X-ray diffraction, Brunauer-Emmett-Teller surface area, thermalgravimetric analysis, and scanning electron microscopy were applied to characterize the prepared catalysts. Catalytic performances were evaluated in a microreactor setup under different experimental conditions. The biodiesel yield for a sample impregnated with 15 % PW{sub 12} was 30.14 wt-% at a temperature of 135 C and a pressure of 135 psi for 3 h reaction time. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  11. Biodiesel production from waste frying oil using waste animal bone and solar heat.

    Science.gov (United States)

    Corro, Grisel; Sánchez, Nallely; Pal, Umapada; Bañuelos, Fortino

    2016-01-01

    A two-step catalytic process for the production of biodiesel from waste frying oil (WFO) at low cost, utilizing waste animal-bone as catalyst and solar radiation as heat source is reported in this work. In the first step, the free fatty acids (FFA) in WFO were esterified with methanol by a catalytic process using calcined waste animal-bone as catalyst, which remains active even after 10 esterification runs. The trans-esterification step was catalyzed by NaOH through thermal activation process. Produced biodiesel fulfills all the international requirements for its utilization as a fuel. A probable reaction mechanism for the esterification process is proposed considering the presence of hydroxyapatite at the surface of calcined animal bones.

  12. Biodiesel production from waste frying oil using waste animal bone and solar heat.

    Science.gov (United States)

    Corro, Grisel; Sánchez, Nallely; Pal, Umapada; Bañuelos, Fortino

    2016-01-01

    A two-step catalytic process for the production of biodiesel from waste frying oil (WFO) at low cost, utilizing waste animal-bone as catalyst and solar radiation as heat source is reported in this work. In the first step, the free fatty acids (FFA) in WFO were esterified with methanol by a catalytic process using calcined waste animal-bone as catalyst, which remains active even after 10 esterification runs. The trans-esterification step was catalyzed by NaOH through thermal activation process. Produced biodiesel fulfills all the international requirements for its utilization as a fuel. A probable reaction mechanism for the esterification process is proposed considering the presence of hydroxyapatite at the surface of calcined animal bones. PMID:25708407

  13. Microalgae from domestic wastewater facility's high rate algal pond: Lipids extraction, characterization and biodiesel production.

    Science.gov (United States)

    Drira, Neila; Piras, Alessandra; Rosa, Antonella; Porcedda, Silvia; Dhaouadi, Hatem

    2016-04-01

    In this study, the harvesting of a biomass from a high rate algal pond (HRAP) of a real-scale domestic wastewater treatment facility and its potential as a biomaterial for the production of biodiesel were investigated. Increasing the medium pH to 12 induced high flocculation efficiency of up to 96% of the biomass through both sweep flocculation and charge neutralization. Lipids extracted by ultrasounds from this biomass contained around 70% of fatty acids, with palmitic and stearic acids being the most abundant. The extract obtained by supercritical CO2 contained 86% of fatty acids. Both conventional solvents extracts contained only around 10% of unsaturated fats, whereas supercritical CO2 extract contained more than 40% of unsaturated fatty acids. This same biomass was also subject to direct extractive-transesterification in a microwave reactor to produce fatty acid methyl esters, also known as, raw biodiesel. PMID:26866759

  14. Converting paper mill sludge into neutral lipids by oleaginous yeast Cryptococcus vishniaccii for biodiesel production.

    Science.gov (United States)

    Deeba, Farha; Pruthi, Vikas; Negi, Yuvraj S

    2016-08-01

    Paper mill sludge (PMS) was assessed as cheap renewable lignocellulosic biomass for lipid production by the oleaginous yeast Cryptococcus vishniaccii (MTCC 232). The sonicated paper mill sludge extract (PMSE) exhibited enhanced lipid yield and lipid content 7.8±0.57g/l, 53.40% in comparison to 5.5±0.8g/l, 40.44% glucose synthetic medium, respectively. The accumulated triglycerides (TAG) inside the lipid droplets (LDs) were converted to biodiesel by transesterification and thoroughly characterized using GC-MS technique. The fatty acid methyl ester (FAME) profile obtained reveals elevated content of oleic acid followed by palmitic acid, linoleic acid and stearic acid with improved oxidative stability related to biodiesel quality. PMID:26965670

  15. High performance catalytic distillation using CNTs-based holistic catalyst for production of high quality biodiesel

    Science.gov (United States)

    Zhang, Dongdong; Wei, Dali; Li, Qi; Ge, Xin; Guo, Xuefeng; Xie, Zaiku; Ding, Weiping

    2014-02-01

    For production of biodiesel from bio oils by heterogeneous catalysis, high performance catalysts of transesterification and the further utilization of glycerol have been the two points of research. The process seemed easy, however, has never been well established. Here we report a novel design of catalytic distillation using hierachically integrated CNTs-based holistic catalyst to figure out the two points in one process, which shows high performance both for the conversion of bio oils to biodiesel and, unexpectedly, for the conversion of glycerol to more valuable chemicals at the same time. The method, with integration of nano, meso to macro reactor, has overwhelming advantages over common technologies using liquid acids or bases to catalyze the reactions, which suffer from the high cost of separation and unsolved utilization of glycerol.

  16. Optimization of the production of biodiesel from soybean oil by ultrasound assisted methanolysis

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Francisco F.P.; Fernandes, Fabiano A.N. [Universidade Federal do Ceara, Departamento de Engenharia Quimica, Campus do Pici, Bloco 709, 60455-760 Fortaleza-CE (Brazil); Rodrigues, Sueli [Universidade Federal do Ceara, Departamento de Tecnologia dos Alimentos, Campus do Pici, Bloco 858, Caixa Postal 12168, 60421-970 Fortaleza-CE (Brazil)

    2009-02-15

    This paper evaluates and optimizes the production of biodiesel from soybean oil and methanol using sodium hydroxide as catalyst. The study and optimization was carried out at low catalyst concentration (0.2 to 0.6 w/w). The reaction was carried out with application of low-frequency high-intensity ultrasound under atmospheric pressure and ambient temperature in a batch reactor. Response surface methodology (RSM) was used to evaluate the influence of methanol to oil ratio and catalyst concentration on soybean oil conversion into biodiesel. Analysis of the operating conditions by RSM showed that the most important operating condition affecting the reaction was the methanol to oil ratio, while catalyst amount showed little significance in the transesterification reaction. Total consumption of oil was obtained when alcohol to oil ratio of 9:1 and catalyst concentration of 0.2 w/w were applied. (author)

  17. Real-time model based process monitoring of enzymatic biodiesel production.

    Science.gov (United States)

    Price, Jason; Nordblad, Mathias; Woodley, John M; Huusom, Jakob K

    2015-01-01

    In this contribution we extend our modelling work on the enzymatic production of biodiesel where we demonstrate the application of a Continuous-Discrete Extended Kalman Filter (a state estimator). The state estimator is used to correct for mismatch between the process data and the process model for Fed-batch production of biodiesel. For the three process runs investigated, using a single tuning parameter, qx  = 2 × 10(-2) which represents the uncertainty in the process model, it was possible over the entire course of the reaction to reduce the overall mean and standard deviation of the error between the model and the process data for all of the five measured components (triglycerides, diglycerides, monoglycerides, fatty acid methyl esters, and free fatty acid). The most significant reduction for the three process runs, were for the monoglyceride and free fatty acid concentration. For those components, there was over a ten-fold decrease in the overall mean error for the state estimator prediction compared with the predictions from the pure model simulations. It is also shown that the state estimator can be used as a tool for detection of outliers in the measurement data. For the enzymatic biodiesel process, given the infrequent and sometimes uncertain measurements obtained we see the use of the Continuous-Discrete Extended Kalman Filter as a viable tool for real time process monitoring.

  18. Biodiesel Production Using Supercritical Methanol with Carbon Dioxide and Acetic Acid

    Directory of Open Access Journals (Sweden)

    Chao-Yi Wei

    2013-01-01

    Full Text Available Transesterification of oils and lipids in supercritical methanol is commonly carried out in the absence of a catalyst. In this work, supercritical methanol, carbon dioxide, and acetic acid were used to produce biodiesel from soybean oil. Supercritical carbon dioxide was added to reduce the reaction temperature and increase the fats dissolved in the reaction medium. Acetic acid was added to reduce the glycerol byproduct and increase the hydrolysis of fatty acids. The Taguchi method was used to identify optimal conditions in the biodiesel production process. With an optimal reaction temperature of 280°C, a methanol-to-oil ratio of 60, and an acetic acid-to-oil ratio of 3, a 97.83% yield of fatty acid methyl esters (FAMEs was observed after 90 min at a reaction pressure of 20 MPa. While the common approach to biodiesel production results in a glycerol byproduct of about 10% of the yield, the practices reported in this research can reduce the glycerol byproduct by 30.2% and thereby meet international standards requiring a FAME content of >96%.

  19. Recent Strategy of Biodiesel Production from Waste Cooking Oil and Process Influencing Parameters: A Review

    Directory of Open Access Journals (Sweden)

    A. Gnanaprakasam

    2013-01-01

    Full Text Available Cost of biodiesel produced from virgin vegetable oil through transesterification is higher than that of fossil fuel, because of high raw material cost. To minimize the biofuel cost, in recent days waste cooking oil was used as feedstock. Catalysts used in this process are usually acids, base, and lipase. Since lipase catalysts are much expensive, the usage of lipase in biodiesel production is limited. In most cases, NaOH is used as alkaline catalyst, because of its low cost and higher reaction rate. In the case of waste cooking oil containing high percentage of free fatty acid, alkaline catalyst reacts with free fatty acid and forms soap by saponification reaction. Also, it reduces the biodiesel conversions. In order to reduce the level of fatty acid content, waste cooking oil is pretreated with acid catalyst to undergo esterification reaction, which also requires high operating conditions. In this review paper, various parameters influencing the process of biofuel production such as reaction rate, catalyst concentration, temperature, stirrer speed, catalyst type, alcohol used, alcohol to oil ratio, free fatty acid content, and water content have been summarized.

  20. Application of Biotechnology to Construct a Sustainable Biodiesel Production System on Wastewater

    Science.gov (United States)

    Wu, Xiaodan; Liu, Yuhuan; Xu, Erni; Liu, Jianqiang; Ruan, Roger; Fu, Guiming

    2010-11-01

    The potential of microalgae biodiesel is unlimited. The ingenious combination of microalgae biomass exploitation, decontamination of municipal wastewater, and CO2 fixation may gestate the ultimate hope for solving the problem of liquid alternative fuel. However, the municipal wastewater has some characteristics, such as high content of nitrogen and phosphorus, low C/N ratio, fluctuation of loading rate, toxicity of heavy metal, etc. To overcome these problems, studies are currently underway in our laboratory. In this paper, an idea of constructing a sustainable biodiesel production system from microalgae on wastewater is assumed. The system could realize CO2 fixation, decontamination of municipal wastewater, and production of high value-added biodiesel by microalgae. Firstly, municipal wastewater is used as the cultivation media and CO2 as gaseous fertilizer for mass culture of Shuihua microalgae. So with the harvest of large quantities of low-price Shuihua microalgae, the nitrogen, phosphorus and heavy metals can be removed from the wastewater, and the emission of greenhouse gas can be reduced. Secondly, try to breed a high-oil content engineering microalgae by heterotrophic cultivation which could realize high-density growth through the conjunction of the advanced methods of fermentation engineering with the microalgae breeding technology. Finally, make the high-oil content engineering microalgae cultivated on the decomposed Shuihua microalgae cells, and try to make the high-oil content engineering microalgae grow rapidly in the initial stage and start oil accumulation when nitrogen is exhausted by controlling the conditions of fermentation.

  1. Solar Energy for a Solvent Recovery Stage in a Biodiesel Production Process

    Directory of Open Access Journals (Sweden)

    José A. León

    2016-01-01

    Full Text Available Recent research and development of clean energy have become essential due to the global climate change problem, which is caused largely by fossil fuels burning. Therefore, biodiesel, a renewable and ecofriendly biofuel with less environmental impact than diesel, continues expanding worldwide. The process for biodiesel production involves a significant energy demand, specifically in the methanol recovery stage through a flash separator and a distillation column. Traditionally, the energy required for this process is supplied by fossil fuels. It represents an opportunity for the application of renewable energy. Hence, the current study presents a system of thermal energy storage modeled in TRNSYS® and supported by simulations performed in ASPEN PLUS®. The aim of this research was to supply solar energy for a methanol recovery stage in a biodiesel production process. The results highlighted that it is feasible to meet 91% of the energy demand with an array of 9 parabolic trough collectors. The array obtained from the simulation was 3 in series and 3 in parallel, with a total area of 118.8 m2. It represents an energy saving of 70 MWh per year.

  2. Preparation and characterizaton of CaO nanoparticle for biodiesel production

    Science.gov (United States)

    Gupta, Jharna; Agarwal, Madhu

    2016-04-01

    Nanoparticle of CaO from calcium Nitrate (CaO/CaN) and Snail shell (CaO/SS) are successfully synthesized by method as described in the literature and used as an active and stable catalyst for the biodiesel production. These catalysts are characterized by Fourier-transform infrared spectra (FT-IR), X-ray diffraction (XRD), and thermal gravimetric analysis (TGA). The average crystalline size in nanometer was also calculated by Debye-Scherrer equation. The performance of the CaO/CaN and CaO/SS were tested for their catalytic activity via transesterification process and it was found that biodiesel yield has been increased from 93 to 96%. The optimum conditions for the highest yield were 8wt% catalyst loading, 65°C temperature, 12:1 methanol/oil molar ratio, and 6 h for reaction time. The nano catalyst from snail shell exhibits excellent catalytic activity and stability for the transesterification reaction, which suggested that this catalyst would be potentially used as a solid base nano catalyst for biodiesel production. In order to examine the reusability of catalyst developed from snail shell, five transesterification reaction cycles were also performed.

  3. Synergistic dynamics of nitrogen and phosphorous influences lipid productivity in Chlorella minutissima for biodiesel production.

    Science.gov (United States)

    Arora, Neha; Patel, Alok; Pruthi, Parul A; Pruthi, Vikas

    2016-08-01

    The study synergistically optimized nitrogen and phosphorous concentrations for attainment of maximum lipid productivity in Chlorella minutissima. Nitrogen and phosphorous limited cells (N(L)P(L)) showed maximum lipid productivity (49.1±0.41mg/L/d), 1.47 folds higher than control. Nitrogen depletion resulted in reduced cell size with large sized lipid droplets encompassing most of the intracellular space while discrete lipid bodies were observed under nitrogen sufficiency. Synergistic N/P starvations showed more prominent effect on photosynthetic pigments as to individual deprivations. Phosphorous deficiency along with N starvation exhibited 17.12% decline in carbohydrate while no change in nitrogen sufficient cells were recorded. The optimum N(L)P(L) concentration showed balance between biomass and lipid by maintaining intermediate cell size, pigments, carbohydrate and proteins. FAME profile showed C14-C18 carbon chains in N(L)P(L) cells with biodiesel properties comparable to plant oil methyl esters. Hence, synergistic N/P limitation was effective for enhancing lipid productivity with reduced consumption of nutrients. PMID:26970694

  4. Assessment of the biodiesel distribution infrastructure in Canada

    International Nuclear Information System (INIS)

    Canada's biodiesel industry is in its infancy, and must work to achieve the demand needed to ensure its development. This assessment of Canada's biodiesel distribution infrastructure was conducted to recommend the most efficient infrastructure pathway for effective biodiesel distribution. The study focused on the establishment of a link between biodiesel supplies and end-users. The current Canadian biodiesel industry was discussed, and future market potentials were outlined. The Canadian distillate product distribution infrastructure was discussed. Technical considerations and compliance issues were reviewed. The following 2 scenarios were used to estimate adaptations and costs for the Canadian market: (1) the use of primary terminals to ensure quality control of biodiesel, and (2) storage in secondary terminals where biodiesel blends are prepared before being transported to retail outlets. The study showed that relevant laboratory training programs are needed as well as proficiency testing programs in order to ensure adequate quality control of biodiesel. Standards for biodiesel distribution are needed, as well as specifications for the heating oil market. It was concluded that this document may prove useful in developing government policy objectives and identifying further research needs. 21 refs., 12 tabs., 13 figs

  5. Environmental and life cycle analysis of a biodiesel production line from sunflower in the Province of Siena (Italy)

    International Nuclear Information System (INIS)

    The Directive 2009/28/EC established the overall target that 20% of energy consumption should be represented by renewable energy sources by 2020 in each European member state. Furthermore, the Directive sets a mandatory 10% minimum target for biofuels in the transport sector. Biofuels are potentially an important alternative to mineral diesel. We propose a pilot production line of biodiesel from sunflower on local scale in the Province of Siena (Tuscany) to research a possible reduction of fossil fuel consumption in the transport sector. This study might represent an opportunity to reduce petroleum dependence in the transport sector. Environmental Impact Indicators were provided by Material Flow Accounting, Embodied Energy Analysis and Emergy Accounting. Results showed that agricultural phase is the critical step in the production line. A comparative Life Cycle Assessment analysis for the biodiesel production line with mineral diesel production showed environmental advantages of the biofuel production, however requiring a higher land demand. Therefore, biodiesel may not the optimal solution on large scale but might be a good alternative to fossil fuel. This would depend upon the entire production cycle taking place in a limited area. This is necessary in order to fulfill the needs of local farms and small enterprises. - Highlights: • Environmental profile of the biodiesel production from sunflower was evaluated. • Agricultural phase is the critical step in the whole production line. • Biodiesel from sunflower cannot be considered a totally renewable energy source. • Biodiesel shows advantages in respect to mineral diesel but a higher land demand. • Biodiesel mix may be a good solution on local scale

  6. Ionic liquid as a promising biobased green solvent in combination with microwave irradiation for direct biodiesel production.

    Science.gov (United States)

    Wahidin, Suzana; Idris, Ani; Shaleh, Sitti Raehanah Muhamad

    2016-04-01

    The wet biomass microalgae of Nannochloropsis sp. was converted to biodiesel using direct transesterification (DT) by microwave technique and ionic liquid (IL) as the green solvent. Three different ionic liquids; 1-butyl-3-metyhlimidazolium chloride ([BMIM][Cl], 1-ethyl-3-methylimmidazolium methyl sulphate [EMIM][MeSO4] and 1-butyl-3-methylimidazolium trifluoromethane sulfonate [BMIM][CF3SO3]) and organic solvents (hexane and methanol) were used as co-solvents under microwave irradiation and their performances in terms of percentage disruption, cell walls ruptured and biodiesel yields were compared at different reaction times (5, 10 and 15 min). [EMIM][MeSO4] showed highest percentage cell disruption (99.73%) and biodiesel yield (36.79% per dried biomass) after 15 min of simultaneous reaction. The results demonstrated that simultaneous extraction-transesterification using ILs and microwave irradiation is a potential alternative method for biodiesel production. PMID:26851899

  7. Optimization of aeration for biodiesel production by Scenedesmus obliquus grown in municipal wastewater.

    Science.gov (United States)

    Han, Song-Fang; Jin, Wenbiao; Tu, Renjie; Abomohra, Abd El-Fatah; Wang, Zhi-Han

    2016-07-01

    Despite the significant breakthroughs in research on microalgae as a feedstock for biodiesel, its production cost is still much higher than that of fossil diesel. One possible solution to overcome this problem is to optimize algal growth and lipid production in wastewater. The present study examines the optimization of pretreatment of municipal wastewater and aeration conditions in order to enhance the lipid productivity of Scenedesmus obliquus. Results showed that no significant differences were recorded in lipid productivity of S. obliquus grown in primary settled or sterilized municipal wastewater; however, ultrasound pretreatment of wastewater significantly decreased the lipid production. Whereas, aeration rates of 0.2 vvm significantly increased lipid content by 51 %, with respect to the non-aerated culture, which resulted in maximum lipid productivity (32.5 mg L(-1) day(-1)). Furthermore, aeration enrichment by 2 % CO2 resulted in increase of lipid productivity by 46 % over the CO2 non-enriched aerated culture. Fatty acid profile showed that optimized aeration significantly enhanced monounsaturated fatty acid production, composed mainly of C18:1, by 1.8 times over the non-aerated S. obliquus culture with insignificant changes in polyunsaturated fatty acid proportion; suggesting better biodiesel characteristics for the optimized culture. PMID:26969589

  8. Silk-Cocoon Matrix Immobilized Lipase Catalyzed Transesterification of Sunflower Oil for Production of Biodiesel

    Directory of Open Access Journals (Sweden)

    Sushovan Chatterjee

    2014-01-01

    Full Text Available Biodiesel from sunflower oil using lipase chemically immobilized on silk-cocoon matrix in a packed-bed bioreactor was investigated. The immobilization was demonstrated by field-emission scanning electron microscopy and activity study. The lipase loading was 738.74 U (~0.01 g lipase powder/g-lipase-immobilized matrix. The Km (Michaelis-Menten constant of the free and the immobilized lipase was 451.26 μM and 257.26 μM, respectively. Low Km value of the immobilized lipase is attributed to the hydrophobic nature of the matrix that facilitated the substrate diffusion to the enzyme surface. The biodiesel yield of 81.62% was obtained at 48 hours reaction time, 6 : 1 methanol : oil ratio (v/v, and 30°C. The immobilized lipase showed high operational stability at 30°C. The substrate conversion was only marginally decreased till third cycle (each of 48 hours duration of the reaction since less than even 5% of the original activity was decreased in each of the second and third cycle. The findings demonstrated the potential of the silk-cocoon as lipase immobilization matrix for industrial production of biodiesel.

  9. Biodiesel Production from Waste Cooking Oil & Its Evaluation in Compression Ignition Engine Using RSM

    Directory of Open Access Journals (Sweden)

    Jashan Deep Singha

    2014-04-01

    Full Text Available Lack of energy, deterioration of the environment and hunger,these are the three problems the humans are facing in todays era. There is an exponential rise in the demand is arrising for petroleum based energy. This has been followed by problem of depleting conventional petroleum fuels and a hike in price of these fuels, almost on a regular basis. Moreover, these green house emissions are results of petroleum fuels and other forms of pollution in the environment. The rise in the price of the fuel has also been alarming for us to find alternate energy resource.The vegetable oils has proved to be a promising source to obtain fuels for IC engines. Like, biodiesel is biodegradable, non- toxic and renewable fuel. It is obtained from vegetable oils, animal fats and waste cooking oil by transesterification with alcohols. The high cost of raw materials and lack of modern technology has led to the commercialization which can optimize the biodiesel yield. A modified engine can lead to better engine performance along with lesser specific fuel consumption. In this thesis, Response Surface Methodology (RSM has been used which has focused on the optimization of biodiesel production, engine performance and exhaust emission parameters.

  10. Biodiesel production from mahua (Madhuca indica) oil having high free fatty acids

    Energy Technology Data Exchange (ETDEWEB)

    Ghadge, S.V.; Raheman, H. [Indian Inst. of Technology, Kharagpur (India). Dept. of Agricultural and Food Engineering

    2005-06-01

    A technique to produce biodiesel from mahua oil (Madhuca indica) having high free fatty acids (19% FFA) has been developed. The high FFA level of mahua oil was reduced to less than 1% by a two-step pretreatment process. Each step was carried out with 0.30-0.35 v/v methanol-to-oil ratio in the presence of 1% v/v H{sub 2}SO{sub 4} as an acid catalyst in 1-hour reaction at 60{sup o}C. After the reaction, the mixture was allowed to settle for an hour and methanol-water mixture that separated at the top was removed. The second step product at the bottom was transesterified using 0.25 v/v methanol and 0.7% w/v KOH as alkaline catalyst to produce biodiesel. The fuel properties of mahua biodiesel were found to be comparable to those of diesel and conforming to both the American and European standards. (Author)

  11. Scale-up of industrial biodiesel production to 40 m3using a liquid lipase formulation

    DEFF Research Database (Denmark)

    Price, Jason; Nordblad, Mathias; Martel, Hannah H.;

    2016-01-01

    In this work, we demonstrate the scale-up from an 80 L fed-batch scale to 40 m3 along with the design of a 4 m3continuous process for enzymatic biodiesel production catalysed by NS-40116 (a liquid formulation of a modified Thermomyces lanuginosus lipase). Based on the analysis of actual pilot plant...... the fed-batch and CSTR cases. Given similar operating conditions, the CSTR operation on average, has a reaction time which is 1.3 times greater than the fed-batch operation. We also showed how the process metrics can be used to quickly estimate the selling price of the enzyme. Assuming a biodiesel selling...... price of 0.6 USD/kg and a one-time use of the enzyme (0.1% (w/woil) enzyme dosage); the enzyme can then be sold for 30 USD/kg which ensures that that the enzyme cost is not more than 5% of the biodiesel revenue. This article is protected by copyright. All rights reserved...

  12. Scum sludge as a potential feedstock for biodiesel production from wastewater treatment plants.

    Science.gov (United States)

    Wang, Yi; Feng, Sha; Bai, Xiaojuan; Zhao, Jingchan; Xia, Siqing

    2016-01-01

    The main goal of this study was to compare the component and yield of biodiesel obtained by different methods from different sludge in a wastewater treatment plant. Biodiesel was produced by ex-situ and in-situ transesterification of scum, primary and secondary sludge respectively. Results showed that scum sludge had a higher calorific value and neutral lipid than that of primary and secondary sludge. The lipid yield accounted for one-third of the dried scum sludge and the maximum yield attained 22.7% under in-situ transesterification. Furthermore the gas chromatography analysis of fatty acid methyl esters (FAMEs) revealed that all sludge contained a significant amount of palmitic acid (C16:0) and oleic acid (C18:1) regardless of extraction solvents and sludge types used. However, the difference lay in that oleic acid methyl ester was the dominant component in FAMEs produced from scum sludge while palmitic acid methyl ester was the dominant component in FAMEs from primary and secondary sludge. In addition, the percentage of unsaturated fatty acid ester in FAMEs from scum sludge accounted for 57.5-64.1% of the total esters, which was higher than the equivalent derived from primary and secondary sludge. In brief, scum sludge is a potential feedstock for the production of biodiesel and more work is needed in the future.

  13. Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, Umer, E-mail: umer.rashid@yahoo.com [Department of Chemistry and Biochemistry, University of Agriculture, Faisalabad 38040 (Pakistan); Chemical Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 31750, Tronoh, Perak (Malaysia); Anwar, Farooq, E-mail: fqanwar@yahoo.com [Department of Chemistry and Biochemistry, University of Agriculture, Faisalabad 38040 (Pakistan); Ashraf, Muhammad, E-mail: ashrafbot@yahoo.com [Department of Botany, University of Agriculture, Faisalabad 38040 (Pakistan); Department of Botany and Microbiology, King Saud University, Riyadh (Saudi Arabia); Saleem, Muhammad [Department of Statistics, Government College University, Faisalabad 38000 (Pakistan); Yusup, Suzana, E-mail: drsuzana_yusuf@petronas.com.my [Chemical Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 31750, Tronoh, Perak (Malaysia)

    2011-08-15

    Highlights: {yields} Biodiesel production from Moringa oil (MO) has been optimized for the first time using RSM. {yields} RSM-optimized reaction conditions gave a high Moringa oil methyl esters (MOMEs) yield (94.3%). {yields} Fuel properties of MOMEs yielded satisfied the ASTM D 6751 and EU 14214 specifications. {yields} Present RSM-model can be useful for predicting optimum biodiesel yield from other oils. - Abstract: Response surface methodology (RSM), with central composite rotatable design (CCRD), was used to explore optimum conditions for the transesterification of Moringa oleifera oil. Effects of four variables, reaction temperature (25-65 deg. C), reaction time (20-90 min), methanol/oil molar ratio (3:1-12:1) and catalyst concentration (0.25-1.25 wt.% KOH) were appraised. The quadratic term of methanol/oil molar ratio, catalyst concentration and reaction time while the interaction terms of methanol/oil molar ratio with reaction temperature and catalyst concentration, reaction time with catalyst concentration exhibited significant effects on the yield of Moringa oil methyl esters (MOMEs)/biodiesel, p < 0.0001 and p < 0.05, respectively. Transesterification under the optimum conditions ascertained presently by RSM: 6.4:1 methanol/oil molar ratio, 0.80% catalyst concentration, 55 deg. C reaction temperature and 71.08 min reaction time offered 94.30% MOMEs yield. The observed and predicted values of MOMEs yield showed a linear relationship. GLC analysis of MOMEs revealed oleic acid methyl ester, with contribution of 73.22%, as the principal component. Other methyl esters detected were of palmitic, stearic, behenic and arachidic acids. Thermal stability of MOMEs produced was evaluated by thermogravimetric curve. The fuel properties such as density, kinematic viscosity, lubricity, oxidative stability, higher heating value, cetane number and cloud point etc., of MOMEs were found to be within the ASTM D6751 and EN 14214 biodiesel standards.

  14. Biomass for biodiesel production on family farms in Brazil: promise or failure? : integrated assessment of biodiesel crops, farms, policies and producer organisations

    OpenAIRE

    Belo Leite, Dal, J.G.

    2013-01-01

    In Brazil, a biodiesel policy was implemented as a way of reducing poverty among family farms. The objective of this thesis is to perform an integrated assessment of biodiesel crops, farm types, biodiesel policies and producer organisations that reveals opportunities and limitations of family farmers’ engagement in the biodiesel supply chain.

  15. Effective heterogeneous transition metal glycerolates catalysts for one-step biodiesel production from low grade non-refined Jatropha oil and crude aqueous bioethanol

    OpenAIRE

    Pak-Chung Lau; Tsz-Lung Kwong; Ka-Fu Yung

    2016-01-01

    The utilization of bioethanol as the alcohol source for biodiesel production is more environmentally advantageous over methanol owing to its lower toxicity, lower flammability and its sustainable supply from renewable agricultural resources. However, as the presence of water in crude bioethanol is the critical factor limiting the biodiesel production process, the energy-intensive and costly purification of bioethanol is necessary for biodiesel application. Manganese glycerolate (MnGly) is rep...

  16. 1,3-Propanediol production from crude glycerol from Jatropha biodiesel process.

    Science.gov (United States)

    Hiremath, Anand; Kannabiran, Mithra; Rangaswamy, Vidhya

    2011-01-31

    The present report describes production of 1,3-propanediol by Klebsiella pneumoniae ATCC 15380 from crude glycerol from jatropha biodiesel process. Optimization resulted in a yield of up to 56g/L of 1,3-propanediol. A conversion rate of 0.85mol 1,3-propanediol/mol of glycerol has been obtained. Downstream processing to isolate 1,3-propanediol from the fermentation broth resulted in 99.7% pure product with a recovery of 34%. The pure 1,3-propanediol was polymerized with terephthalic acid successfully to yield polytrimethylene terephthalate.

  17. Co-utilization of corn stover hydrolysates and biodiesel-derived glycerol by Cryptococcus curvatus for lipid production.

    Science.gov (United States)

    Gong, Zhiwei; Zhou, Wenting; Shen, Hongwei; Zhao, Zongbao K; Yang, Zhonghua; Yan, Jiabao; Zhao, Mi

    2016-11-01

    In the present study, synergistic effects were observed when glycerol was co-fermented with glucose and xylose for lipid production by the oleaginous yeast Cryptococcus curvatus. Glycerol was assimilated simultaneously with sugars at the beginning of the culture without adaption time. Furthermore, better lipid production results, i.e., lipid yield and lipid productivity of 18.0g/100g and 0.13g/L/h, respectively, were achieved when cells were cultured in blends of corn stover hydrolysates and biodiesel-derived glycerol than those in the hydrolysates alone. The lipid samples had fatty acid compositional profiles similar to those of vegetable oils, suggesting their potential for biodiesel production. This co-utilization strategy provides an extremely simple solution to advance lipid production from both lignocelluloses and biodiesel-derived glycerol in one step. PMID:27529520

  18. Biodiesel: an overview

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Angelo C.; Guarieiro, Lilian L.N.; Rezende, Michelle J.C.; Ribeiro, Nubia M. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Quimica; Torres, Ednildo A. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Dept. de Engenharia Quimica; Lopes, Wilson A.; Pereira, Pedro A. de P.; Andrade, Jailson B. de [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Quimica], Email: jailsong@ufba.br

    2005-07-01

    The importance of biodiesel production was analyzed based on scientific articles and patents. A critical analysis was presented on the most used oil sources, the catalysts and the methods to verify the transesterification yields. Also analyzed were the comparative studies on emissions from pure fossil diesel and mixtures with biodiesel in variable proportions. Finally some challenges and considerations focused on technological, agronomic and infrastructure aspects of biodiesel production were indicated. (author)

  19. Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste

    Directory of Open Access Journals (Sweden)

    Almeida João R M

    2012-07-01

    Full Text Available Abstract The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a “waste-stream” instead of a valuable “coproduct”. The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

  20. GLYCERINE: FROM A INCONVINIENT BIODIESEL BY-PRODUCT TO A POSSIBLE APPLICATION AS A FLOCCULANT IN WATER TREATMENT

    Directory of Open Access Journals (Sweden)

    GAUTO, Marcelo Antunes

    2010-01-01

    Full Text Available Glycerin is a by-product obtained during the biodiesel manufacture, through the transesterification reaction of vegetal oils. The prevision of excedent glycerine in the next few years, due to the increasing of the biodiesel production in Brazil, has been generating a discussion about new applications to this by-product. This article presents a theoretical study about the possible synthesis of a new flocculant agent, from semi-refined glycerine and p-nitrobenzoic acid to produce a quaternary ammonium salt, to be used in water treatment. The reactions which would occur during the synthesis of the flocculant agent and the necessary tests to the product validation are presented.