WorldWideScience

Sample records for bioclimate design ahorro

  1. Diseño bioclimático en Galicia : ahorro energético y confort

    OpenAIRE

    Pena Gayo, Katia

    2016-01-01

    El objeto de estudio de la presente disertación es la arquitectura bioclimática en Galicia, comunidad situada al noroeste de la península ibérica. La investigación surge fruto de una manera de entender la arquitectura como un elemento que debe relacionarse con el entorno en el que se ubica, aprovechando las condiciones del medio a su favor para generar ahorro energético y un mayor confort a sus ocupantes. El carácter limitado de recursos energéticos, junto con los problemas act...

  2. Energy conservation and contribution to the sustained development through action in the bioclimate design; Ahorro de energia y contribucion al desarrollo sustentable a partir de acciones de diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J. R.; Dorantes Rodriguez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D. F. (Mexico)

    1995-12-31

    The energy world crisis of 1973 besides the problems of supplying and the raise of prices also propitiated in various countries, a reaction aimed at the efficient use and conservation of energy and to the application of a common sense architecture: the BIOCLIMATIC ARCHITECTURE, which is based in utilization in the buildings of the alternate energies, such as the wind power, etc. The obtaining natural environmental comfort conditions and the saving and efficient use of energy in the buildings are the fundamental objectives of the BIOCLIMATIC ARCHITECTURE. Under these considerations several passive systems for the thermal control in buildings have been set forth, which have been applied in different climatic regions of the planet. This paper presents and analyzes the potential saving of energy through the implementation of practices such as the installation of artificial high efficiency lighting systems and passive cooling systems for the thermal control of an educational building -the central library of the Universidad Autonoma Metropolitana, Azcapotzalco Unit, located in Mexico City. The objective of this study is aimed at the reduction of the consumption of energy in the library and the attainment of comfortable hygrothermal environment for its occupants. Studies performed during the first stage of the research, have permitted the identification of a excessive energy consumption and lack of comfort hygrothermal conditions and the need of high quality air inside the library. These actions have been focussed to two aspects. The first one is related to the improvement in the operation of the electric installation and in the library lighting. These actions were based in the substitution of lamps, load balancing of the secondary circuits, checking and improvement of the electric insulation a better selectivity of lighting switches installation in the vicinity of windows and areas with greater natural illumination. The second aspect refers to the calculation, design

  3. Energy conservation and contribution to the sustained development through action in the bioclimate design; Ahorro de energia y contribucion al desarrollo sustentable a partir de acciones de diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J. R.; Dorantes Rodriguez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D. F. (Mexico)

    1995-12-31

    The energy world crisis of 1973 besides the problems of supplying and the raise of prices also propitiated in various countries, a reaction aimed at the efficient use and conservation of energy and to the application of a common sense architecture: the BIOCLIMATIC ARCHITECTURE, which is based in utilization in the buildings of the alternate energies, such as the wind power, etc. The obtaining natural environmental comfort conditions and the saving and efficient use of energy in the buildings are the fundamental objectives of the BIOCLIMATIC ARCHITECTURE. Under these considerations several passive systems for the thermal control in buildings have been set forth, which have been applied in different climatic regions of the planet. This paper presents and analyzes the potential saving of energy through the implementation of practices such as the installation of artificial high efficiency lighting systems and passive cooling systems for the thermal control of an educational building -the central library of the Universidad Autonoma Metropolitana, Azcapotzalco Unit, located in Mexico City. The objective of this study is aimed at the reduction of the consumption of energy in the library and the attainment of comfortable hygrothermal environment for its occupants. Studies performed during the first stage of the research, have permitted the identification of a excessive energy consumption and lack of comfort hygrothermal conditions and the need of high quality air inside the library. These actions have been focussed to two aspects. The first one is related to the improvement in the operation of the electric installation and in the library lighting. These actions were based in the substitution of lamps, load balancing of the secondary circuits, checking and improvement of the electric insulation a better selectivity of lighting switches installation in the vicinity of windows and areas with greater natural illumination. The second aspect refers to the calculation, design

  4. Quantification of thermal bioclimate for the management of urban design in Mediterranean climate of Barcelona, Spain

    Science.gov (United States)

    Rodríguez Algeciras, José Abel; Matzarakis, Andreas

    2016-08-01

    In order to contribute to the sustainability of the outdoor environment, knowledge about the urban thermal bioclimate should be transferred into climatic guidelines for planning. The general framework of this study responds to the need of analyzing thermal bioclimate in Mediterranean climate regions and its influence as an urban design factor. The paper analyzes the background of the urban climate and thermal bioclimate conditions in Barcelona (Spain), through the effect of shade conditions and wind speed variations. Simulations of shade and wind speed variations were performed to evaluate changes in thermal bioclimate due to modifications in urban morphology. Air temperature, relative humidity, wind speed, and solar radiation for the period from January, 2001 to January, 2015 were used to calculate physiologically equivalent temperature (PET) using the RayMan model. The results demonstrate that shade is the most important strategy to improve urban microclimatic conditions. In Barcelona, human thermal comfort conditions can be improved by shade and wind speed increase in terms of PET above 23 °C and by a wind speed decrease for thresholds of PET below 18 °C. Heat stress situations can be mitigated by shade and wind speed increase in conditions above 35 and 45 °C, respectively. The results of the study are an important contribution for urban planners, due to their possibilities and potential for the description of microclimatic conditions in Mediterranean climate regions. The knowledge is useful for improved human thermal comfort conditions, from the suitable configuration of urban form and architecture.

  5. Quantification of thermal bioclimate for the management of urban design in Mediterranean climate of Barcelona, Spain

    Science.gov (United States)

    Rodríguez Algeciras, José Abel; Matzarakis, Andreas

    2015-12-01

    In order to contribute to the sustainability of the outdoor environment, knowledge about the urban thermal bioclimate should be transferred into climatic guidelines for planning. The general framework of this study responds to the need of analyzing thermal bioclimate in Mediterranean climate regions and its influence as an urban design factor. The paper analyzes the background of the urban climate and thermal bioclimate conditions in Barcelona (Spain), through the effect of shade conditions and wind speed variations. Simulations of shade and wind speed variations were performed to evaluate changes in thermal bioclimate due to modifications in urban morphology. Air temperature, relative humidity, wind speed, and solar radiation for the period from January, 2001 to January, 2015 were used to calculate physiologically equivalent temperature (PET) using the RayMan model. The results demonstrate that shade is the most important strategy to improve urban microclimatic conditions. In Barcelona, human thermal comfort conditions can be improved by shade and wind speed increase in terms of PET above 23 °C and by a wind speed decrease for thresholds of PET below 18 °C. Heat stress situations can be mitigated by shade and wind speed increase in conditions above 35 and 45 °C, respectively. The results of the study are an important contribution for urban planners, due to their possibilities and potential for the description of microclimatic conditions in Mediterranean climate regions. The knowledge is useful for improved human thermal comfort conditions, from the suitable configuration of urban form and architecture.

  6. Quantification of thermal bioclimate for the management of urban design in Mediterranean climate of Barcelona, Spain.

    Science.gov (United States)

    Rodríguez Algeciras, José Abel; Matzarakis, Andreas

    2016-08-01

    In order to contribute to the sustainability of the outdoor environment, knowledge about the urban thermal bioclimate should be transferred into climatic guidelines for planning. The general framework of this study responds to the need of analyzing thermal bioclimate in Mediterranean climate regions and its influence as an urban design factor. The paper analyzes the background of the urban climate and thermal bioclimate conditions in Barcelona (Spain), through the effect of shade conditions and wind speed variations. Simulations of shade and wind speed variations were performed to evaluate changes in thermal bioclimate due to modifications in urban morphology. Air temperature, relative humidity, wind speed, and solar radiation for the period from January, 2001 to January, 2015 were used to calculate physiologically equivalent temperature (PET) using the RayMan model. The results demonstrate that shade is the most important strategy to improve urban microclimatic conditions. In Barcelona, human thermal comfort conditions can be improved by shade and wind speed increase in terms of PET above 23 °C and by a wind speed decrease for thresholds of PET below 18 °C. Heat stress situations can be mitigated by shade and wind speed increase in conditions above 35 and 45 °C, respectively. The results of the study are an important contribution for urban planners, due to their possibilities and potential for the description of microclimatic conditions in Mediterranean climate regions. The knowledge is useful for improved human thermal comfort conditions, from the suitable configuration of urban form and architecture. PMID:26694490

  7. Capturando el Ahorro Popular

    OpenAIRE

    Maunel J. Lagares Calvo

    2001-01-01

    Ofrece información acerca de los canales para captar ahorros que brinda Confederación Española de Cajas de Ahorro, la red de oficinas, agentes de las cajas de ahorros, así como la oferta de los productos. Asimismo, menciona las características de las cuentas de ahorro vivienda y presenta algunos datos estadísticos sobre las cajas de ahorro españolas.

  8. Cost-benefit of energy saving in bioclimatic designs; Costo-beneficio del ahorro de energia en los disenos bioclimatios

    Energy Technology Data Exchange (ETDEWEB)

    Lopez P, J. Manuel A. [Doble dos soluciones de Negocios (Mexico); Morillon G, David; Rdriguez V, Luis [Universidad Autonoma de Mexico (Mexico)

    2001-06-01

    Tools and criteria for Cost-Benefit Analysis (ACB) of energy saving in bioclimatic designs (DB) are presented, for which a reference project is established. Based on the traditional design of air conditioning of a building and with the support of this one, the estimation of costs and benefits of the same building is made; but with passive systems. The tools used consider related resources such as time and money. Criteria are used such as: Present value (VP), Equivalent Annual Cost (EAC) and the Cost of the conserved Energy (CEC). The costs related to the construction, maintenance and operation of the design are taken into consideration. The differences between the design of reference and the Bioclimatic Design, established from the application of these criteria, allow evaluating the economic margin as far as operation and maintenance. Finally, the cost of the conserved energy of the bioclimatic measures is evaluated as an initiative for energy saving and calculates the present value from them in all of the period of useful life of the bioclimatic design. [Spanish] Se presentan herramientas y criterios para el analisis Costo-Beneficio (ACB) del ahorro de energia en los disenos bioclimaticos (DB), para lo cual se establece un proyecto de referencia. Basado en el diseno tradicional de la climatizacion de un edificio y con apoyo en este, se realiza la estimacion de costos y beneficios del mismo edificio; pero con sistema pasivos. Las herramientas usadas consideran recursos relacionados como son tiempo y dinero. Se usan criterios tales como: Valor Presente (VP), Costo Anual Equivalente (CAE) y el Costo de la Energia conservada (CEC). Se toman en consideracion los costos relacionados con la construccion, mantenimiento y operacion del diseno. Las diferencias entre el diseno de referencia y el Diseno Bioclimatico, establecidas a partir de la aplicacion de estos criterios, permiten evaluar el margen economico en cuanto a la operacion y el mantenimiento. Finalmente, se

  9. Cost-Benefit of the energy saving in the bioclimatic designs; Costo-Beneficio del ahorro de energia en los disenos bioclimaticos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez P, J. Manuel A. [Doble Dos Soluciones de Negocios, S.A. de C.V., Mexico, D.F. (Mexico); Morillon G, David; Rodriguez V, Luis [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    1999-07-01

    Tools and criteria for the Cost-Benefit analysis from the energy saving in bioclimatic designs (BD) are presented, for which, a reference project is established and the costs and benefits of energy saving in BD with base in that project are evaluated. A case study is presented taking as reference the traditional design of the air conditioning of a building and with this base the estimation of cost-benefit of the same building is made, but with passive systems. The tools used are those that allow to consider related resources such as time and money; in that sense, are used criteria such as: Present value (PV), Equivalent Annual Cost (EAC) and the Cost of the Conserved Energy (CCE). The costs related to the construction, maintenance and operation of the design are taken into account. The differences between the reference design and the BD, established from the application of these criteria, allow to evaluate the economic margin of the BD as far as operation and maintenance is concerned. Finally the CCE of the bioclimatic measures is evaluated as an initiative of energy saving and the present value is calculated of the energy saving in the entire useful life of a bioclimatic design. [Spanish] Se presentan herramientas y criterios para el analisis Costo-Beneficio del ahorro de energia en disenos bioclimaticos (DB), para lo cual, se establece un proyecto de referencia y se evaluan los costos y beneficios del ahorro de energia en DB con base en ese proyecto. Se presenta el estudio de un caso tomando como referencia el dise tradicional de la climatizacion de un edificio y con base en este, se realiza la estimacion de costos y beneficios del mismo edificio, pero con sistemas pasivos. Las herramientas usadas, son aquellas que permiten considerar recursos relacionados como son tiempo y dinero; en ese sentido, se usan criterios como: Valor Presente (VP), Costo Anual Equivalente (CAE) y el Costo de la Energia Conservada (CEC). Se toman en consideracion los costos relacionados

  10. Diseño participativo de espacios urbanos bioclimáticos. Experiencia en Mendoza (Argentina

    Directory of Open Access Journals (Sweden)

    Claudia Fernanda Martinez

    2015-04-01

    Full Text Available El presente trabajo reconoce los beneficios de las técnicas participativas de diseño para la producción social y sustentable del hábitat, al equilibrar soluciones bioclimáticas con los intereses de los beneficiarios. Como metodología, se aplicaron talleres comunitarios orientados tradicionalmente solo a la vivienda, para el diseño participativo de espacios urbanos conexos y sus redes en un conjunto habitacional de la provincia de Mendoza (Argentina. El desarrollo de talleres de diseño participativo pone de manifiesto la importancia de transferir a la comunidad beneficiaria de planes de vivienda de interés social los conceptos de la arquitectura bioclimática y sus implicaciones en la calidad de vida de las personas, el ahorro energético y la sustentabilidad ambiental. Los resultados indican que es posible conciliar el diseño de espacios urbanos eficientes energética y ambientalmente con cero sobrecosto y que, al mismo tiempo satisfagan las expectativas de los usuarios.

  11. Energy savings in buildings through the architectonic design; Ahorro de energa en edificaciones a traves de diseno arquitectonico

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa Castrejon, A. [Universidad Autnoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Laboratorio de Arquitectura Bioclimatica (Mexico)

    1997-12-31

    This paper points out the problems the existing buildings have in its architectonic design and alternatives presented to improve their habitability and energy consumption, making reference to national cases and to the social-economic environment of our country. [Espanol] El presente trabajo senala los problemas que tienen las edificaciones actuales en su diseno arquitectonico y las alternativas que se presentan para mejorar su habitabilidad y consumo energetico, haciendo referencia a los casos nacionales y al entorno socioeconmico de nuestro pas.

  12. Bioclim Deliverable D1: environmental change analysis

    International Nuclear Information System (INIS)

    The BIOCLIM project on modelling sequential Biosphere systems under Climate change for radioactive waste disposal is part of the EURATOM fifth European framework programme. The project was launched in October 2000 for a three-year period. The project aims at providing a scientific basis and practical methodology for assessing the possible long term impacts on the safety of radioactive waste repositories in deep formations due to climate and environmental change. The project brings together a number of representatives from both European radioactive waste management organisations which have national responsibilities for the safe disposal of radioactive waste, either as disposers or regulators, and several highly experienced climate research teams. In particular, BIOCLIM aims to address the important objective of how to represent the development of future biosphere systems by addressing both how to model long-term climate change, the relevant environmental consequences of such changes and the implementation of a sequential approach to such changes. The results from the development of this sophisticated approach will be of great benefit for improving long term radiological impact calculations and the information presented in a safety case. Simulations will be conducted to represent the time series of long-term climate in three European areas within which disposal sites may be established (i.e. Central/Southern Spain, Northeast of France and Central Britain). Two complementary strategies will provide representations of future climate predictions together with associated vegetation patterns using either an analysis of distinct climate states or a continuous climate simulation over at least one glacial-interglacial cycle and possibly for other selected periods over the next 1,000,000 years. These results will be used to derive the characteristics of possible future human environments (i.e. biosphere systems) through which radionuclides, emerging from the repository, may

  13. Design aspects and conservation of roads in the saving of energy; Aspectos de diseno y conservacion de carreteras en el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Cajun, Carlos S.; Aguerrebere Salido, Roberto [Instituto Mexicano del Transporte, Queretaro (Mexico)

    1992-12-31

    In this paper the effects that on the fuel consumption the roads have for their slopes and roughness are presented. A mathematical model is presented which shows the relationship between the slope, the roughness coefficient and the required power to overcome the corresponding resistance; the former in order to predict the fuel consumption and therefore, the potential level of energy saving corresponding to this item. [Espanol] En este trabajo se presentan los efectos que sobre consumo de combustible se tienen, debido a las pendientes y rugosidades de las carreteras. Se presenta un modelo matematico que muestra la relacion entre la pendiente, el coeficiente de rodamiento y la potencia requerida para vencer las resistencias correspondientes; lo anterior con el fin de predecir el consumo de combustible y, por lo tanto, los niveles potenciales de ahorro de energia correspondientes a este rubro.

  14. Bioclimate and city planning - open space planning

    Science.gov (United States)

    Mertens, Elke

    The planning and using of open spaces in urban areas very much depend on the shading of the surrounding building structures. This article presents a method for the investigation of the sunlight and the bioclimatic conditions in dependence on the surrounding buildings. It is illustrated for typical courtyards in Berlin, Germany, as one type of open spaces. The programme HelioDat determines the shading of any spot of an open space. It gives the possible duration of direct sunlight for the selected spot for each day of the year. The sunlight conditions in the courtyards differ from one another a lot in dependence on their size the tallness of the surrounding buildings. The calculation of the PMV on the basis of the results of the programme HelioDat determine the bioclimatic situation in the discussed courtyards. Although the results of HelioDat are only one input among the weather conditions and the personal characteristics of the test-person, the bioclimatic conditions correlate very much with the sunlight conditions. In a projected building structure, the sunlight conditions vary a lot between the present situation and the two architectural alternatives. Since the bioclimatic situation is correlated to the sunlight conditions, this example demonstrates the importance for the investigation of the sunlight conditions and the bioclimate already during the planning process of buildings.

  15. El ahorro en condiciones formales e informales

    OpenAIRE

    Mariano Bosch; Angel Melguizo; Ximena Peña; David Tuesta

    2015-01-01

    En este estudio se analizan los distintos factores personales que afectan a las condiciones del ahorro segun dos innovadoras encuestas realizadas por el Banco Interamericano de Desarrollo (BID) en las ciudades de Lima y Mexico D.F.

  16. Thermal bioclimate in idealized urban street canyons in Campinas, Brazil

    Science.gov (United States)

    Abreu-Harbich, Loyde V.; Labaki, Lucila C.; Matzarakis, Andreas

    2014-01-01

    Among several urban design parameters, the height-to-width ratio (H/W) and orientation are important parameters strongly affecting thermal conditions in cities. This paper quantifies changes in thermal comfort due to typical urban canyon configurations in Campinas, Brazil, and presents urban guidelines concerning H/W ratios and green spaces to adapt urban climate change. The study focuses on thermal comfort issues of humans in urban areas and performs evaluation in terms of physiologically equivalent temperature (PET), based on long-term data. Meteorological data of air temperature, relative humidity, wind speed and solar radiation over a 7-year period (2003-2010) were used. A 3D street canyon model was designed with RayMan Pro software to simulate the influence of urban configuration on urban thermal climate. The following configurations and setups were used. The model canyon was 500 m in length, with widths 9, 21, and 44 m. Its height varied in steps of 2.5 m, from 5 to 40 m. The canyon could be rotated in steps of 15°. The results show that urban design parameters such as width, height, and orientation modify thermal conditions within street canyons. A northeast-southwest orientation can reduce PET during daytime more than other scenarios. Forestry management and green areas are recommended to promote shade on pedestrian areas and on façades, and to improve bioclimate thermal stress, in particular for H/W ratio less than 0.5. The method and results can be applied by architects and urban planners interested in developing responsive guidelines for urban climate issues.

  17. Energy saving in office buildings through cheap bioclimatic design measures; Ahorro de energia en edificios de oficinas a partir de medidas de diseno bioclimatico de bajo costo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, Jose Roberto [Universidad Autonoma Metropolitana, Unidad Azcapotzalco (Mexico)

    2007-01-15

    This article shows the study performed in a building of Campus Uni dad Azcapotzalco in order to evaluate some bioclimatic design strategies. And to reach the higrothermic comfort and the appropriate lighting to favor employees to increase their performance in work activities. There are some strategies in order to solve this problem: the skylight area reduction, existing lights change, ventilation increase, fixed partition door implementation, etc. The obtained outcomes make possible the beginning of bioclimatic design use to save energy in other buildings, because sometimes edifications possess a design that cause the energy waste. [Spanish] En este articulo se muestra el estudio que se hizo en un edificio en el Campus Unidad Azcapotzalco, el fin de esta labor es evaluar ciertas estrategias de diseno bioclimatico para que las personas que operan en este edificio puedan tener confort higrotermico y una iluminacion pertinente, que den como resultado un mejor desempeno en las tareas que realizan. Algunas de las estrategias para darle solucion a esta problematica son: disminuir del area de lucernarios, cambiar las luminarias existentes, aumentar la ventilacion, implementar canceleria, etc. Con los resultados obtenidos nace la esperanza de que se utilicen estrategias de diseno bioclimatico para ahorrar energia en otros edificios, ya que muchas veces las edificaciones poseen un diseno que unicamente provoca el uso imprudente de la energia.

  18. Bioclimate analysis of Mountain Bjelašnica

    Directory of Open Access Journals (Sweden)

    Šušnjar Sanda

    2014-01-01

    Full Text Available The main task of this paper was to assess weather suitability on Bjelasnica Mountain for optimal function of a human organism. Also, this paper represents weather classification for certain types of recreation and sport's activities. For the purpose of bioclimate analyses it has been used Model “MENEX”. This paper deals with the assessment of heat exchange between man and its environment. Research is based on a meteorological data from 2000 to 2010. The aim of a research was to determine periods in year on mountain Bjelasnica with optimal climate conditions for recreation and living but also to define periods with mostly unsuitable weather conditions, except for healthy and well adapted persons and specific type of activities.

  19. The human bioclimates of Western and South Pacific islands and climate change.

    Science.gov (United States)

    McGregor, G R

    1995-08-01

    The current bioclimates of equatorial Western and tropical South Pacific have been assessed, using the concepts of effective temperature and relative strain as a basis for evaluating likely changes in human comfort regimes as a consequence of global warming. Current bioclimates may be considered marginally stressful for indigenous populations. Global warming will result in changes in the frequency, duration and intensity of physioclimatically stressful conditions.

  20. Bioclim Deliverable D6b: application of statistical down-scaling within the BIOCLIM hierarchical strategy: methods, data requirements and underlying assumptions

    International Nuclear Information System (INIS)

    The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. The coarse spatial scale of the Earth-system Models of Intermediate Complexity (EMICs) used in BIOCLIM compared with the BIOCLIM study regions and the needs of performance assessment creates a need for down-scaling. Most of the developmental work on down-scaling methodologies undertaken by the international research community has focused on down-scaling from the general circulation model (GCM) scale (with a typical spatial resolution of 400 km by 400 km over Europe in the current generation of models) using dynamical down-scaling (i.e., regional climate models (RCMs), which typically have a spatial resolution of 50 km by 50 km for models whose domain covers the European region) or statistical methods (which can provide information at the point or station scale) in order to construct scenarios of anthropogenic climate change up to 2100. Dynamical down-scaling (with the MAR RCM) is used in BIOCLIM WP2 to down-scale from the GCM (i.e., IPSLCM4D) scale. In the original BIOCLIM description of work, it was proposed that UEA would apply statistical down-scaling to IPSLCM4D output in WP2 as part of the hierarchical strategy. Statistical down-scaling requires the identification of statistical relationships between the observed large-scale and regional/local climate, which are then applied to large-scale GCM output, on the assumption that these relationships remain valid in the future (the assumption of stationarity). Thus it was proposed that UEA would investigate the extent to which it is possible to apply relationships between the present-day large-scale and regional/local climate to the relatively extreme conditions of the BIOCLIM WP2 snapshot simulations. Potential statistical down-scaling methodologies were identified from previous work performed at UEA. Appropriate station data from the case-study regions were

  1. Standardization for electric energy saving; Normalizacion para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Reyes Diaz, Arturo [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

    1993-12-31

    This work describes shortly the current legislation on the standardization; as well as the participation of the entities Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) and Programa de Ahorro de Energia (PAESE) in the consulting committees, for the elaboration of the Mexican official standards focussed to electric power saving. [Espanol] El presente trabajo, describe brevemente la legislacion actual sobre la normalizacion; asi como la participacion de las entidades Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) y Programa de ahorro de Energia (PAESE) en los comites consultivos, para la elaboracion de normas oficiales mexicanas enfocadas al ahorro de energia electrica.

  2. Factores determinantes del ahorro interno en América Latina

    OpenAIRE

    Carlos Añez; Angel Urbina; Lionar Ojeda

    2002-01-01

    El siguiente artículo aborda el problema del financiamiento de la inversión para un país en desarrollo, específicamente de la América Latina, tratando de revisar la literatura disponible para llegar a conclusiones sobre cómo los determinantes del ahorro en todas sus versiones -ahorro externo, ahorro privado y ahorro público- ejercen influencia sobre el proceso de crecimiento. Aun cuando la dirección causal exacta entre ahorro y crecimiento no ha sido establecida, el desarrollo de ...

  3. Impacto de la reforma al sistema de pensiones en México sobre el ahorro

    OpenAIRE

    Alejandro Villagómez; Juan Ignacio Hernández

    2009-01-01

    Uno de los principales argumentos esgrimidos en la reforma al sistema de pensiones en México fue su impacto positivo en el ahorro. Este trabajo realiza una primera cuantificación de este impacto. Para ello se estima una serie de ahorro contractual generado por este programa, así como la relación que esta variable guarda con el ahorro privado voluntario. Los resultados obtenidos sugieren que el ahorro contractual y los cambios en el ahorro público generados a diez años de la reforma al esquema...

  4. Ahorro y eficiencia energetica derivados de nuevas tecnologia de siembras

    OpenAIRE

    Valero Ubierna, Constantino; Garrido Izard, Miguel; Barreiro Elorza, Pilar; Conceiçao, Luis Alcino

    2010-01-01

    En una próxima publicación del IDAE se trata el tema de si es posible el ahorro energético y de insumos aplicando técnicas de agricultura de precisión. Este artículo tiene un ectracto de dicha publicación, en este caso sobre la siembra, y en particular sobre la siembra directa.

  5. El Ahorro Privado en Venezuela: Tendencias y Determinantes

    OpenAIRE

    Matías Riutort; Rafael Muñoz; Juan Carlos Guevara; Luis Zambrano Sequín

    1998-01-01

    La característica notable del comportamiento de la tasa de ahorro privado en Venezuela es su tendencia secular a reducirse desde los elevados niveles experimentados durante los años setenta a los muy reducidos de los noventa. Adicionalmente a esta tendencia al deterioro, habría que añadir su alta volatilidad. Las razones que explican este resultado no sólo están referidas a los sucesivos shocks, externos e internos, que han afectado a Venezuela, sino también a la forma peculiar como se ha ges...

  6. La arquitectura popular como base de una arquitectura bioclimática. Aplicación al enfriamiento pasivo

    Directory of Open Access Journals (Sweden)

    Esteban Sáiz, José Luis

    1986-11-01

    Full Text Available In this work it is described de diversity of popular architectures that can be found in Spain due to the strong climatological influence in the different zones of the country. It is also pointed out their similarity with the architecture of other countries, independently of the connexions existing between their dwellers. The rise of new tendencies in construction has brought the need to investigate on new architectural design adapted to ambient conditions considering thermophysical conceipts, which till now were not used, since a so called bioclimatic architecture woulbe be reached.En este artículo se describe la diversidad arquitectónica popular que puede apreciarse en España debido, en parte, a la gran influencia climatológica de las diferentes regiones. Se hace resaltar la indudable similitud con otros países, de condiciones ambientales análogas, independientemente de las relaciones que hayan existido entre sus moradores. La entrada de tendencias innovadoras en la edificación ha requerido investigar sobre nuevos diseños constructivos adecuados a las condiciones ambientales y considerando conceptos termofísicos, que hasta el momento actual no se utilizaban, hasta llegar a una arquitectura que pudiéramos llamar bioclimática.

  7. Factores determinantes del ahorro interno en América Latina

    Directory of Open Access Journals (Sweden)

    Carlos Añez

    2002-01-01

    Full Text Available El siguiente artículo aborda el problema del financiamiento de la inversión para un país en desarrollo, específicamente de la América Latina, tratando de revisar la literatura disponible para llegar a conclusiones sobre cómo los determinantes del ahorro en todas sus versiones -ahorro externo, ahorro privado y ahorro público- ejercen influencia sobre el proceso de crecimiento. Aun cuando la dirección causal exacta entre ahorro y crecimiento no ha sido establecida, el desarrollo de políticas económicas que estimulen el ahorro interno por encima del procedente del exterior, fortalecerían la capacidad de inversión interna y, al existir una correlación positiva entre estas variables, se potencia el proceso de crecimiento aunque otras variables igualmente pueden difuminar tal efecto. Se concluye que el incremento de la relación Ahorro Interno / P. I. B. sólo puede alcanzarse a través de esfuerzos comunes entre empresas, gobierno y el sistema financiero de estas economías.

  8. Bioclim Deliverable D7: continuous climate evolution scenarios over western Europe (1000 km scale)

    International Nuclear Information System (INIS)

    The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. This aim is addressed through the following specific objectives: - Development of practical and innovative strategies for representing sequential climatic changes to the geosphere-biosphere system for existing sites over central Europe, addressing the timescale of one million years, which is relevant to the geological disposal of radioactive waste. - Exploration and evaluation of the potential effects of climate change on the nature of the biosphere systems used to assess the environmental impact. - Dissemination of information on the new methodologies and the results obtained from the project among the international waste management community for use in performance assessments of potential or planned radioactive waste repositories. A key point of the project is therefore to develop strategies for representing sequential long-term climatic changes by addressing time scales of relevance to geological disposal of solid radioactive wastes. The integrated strategy, which first step is described in this deliverable (D7), consists of building an integrated, dynamic climate model, to represent all the known important mechanisms for long term climatic variations. The time-dependent results will then be interpreted in terms of regional climate using rule-based and statistical down-scaling approaches. Therefore, the continuous simulation of the climate evolution of the next 200 000 years selected for study is a major objective of the BIOCLIM project. This requires models that account for the simultaneous evolution of the atmosphere, biosphere, land-ice and the ocean. To be able to perform several 200 000-yearlong transient climate simulations, the models have to include all these components, but also need to be simple enough to run fast. Therefore, climate models of intermediate complexity have been chosen to

  9. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N. [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1995-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  10. ABSORCIÓN DE AHORRO INTERNO POR EL GOBIERNO NACIONAL

    Directory of Open Access Journals (Sweden)

    Álvaro José Pedroza Campo

    2002-01-01

    Full Text Available El gobierno colombiano ha financiado durante los últimos cinco años el déficit fiscal en gran medida con recursos provenientes del ahorro nacional, a través de emisiones de títulos en condiciones de rentabilidad innecesariamente altas, frenando la tendencia de disminución de tasas de interés internas. Adicionalmente, la estructura institucional gubernamental a través de la cual se realiza la colocación primaria y la negociación secundaria de dichos títulos, genera una competencia desigual que desplaza a los demás agentes económicos, especialmente el sector productivo, como captadores de recursos del mercado de capitales para financiar sus negocios. Lo anterior ha ocurrido en un período caracterizado por crisis del sector financiero y recesión económica.

  11. Strategies for energy saving in warm climate dwellings; Estrategias de ahorro de energia para viviendas en clima calido

    Energy Technology Data Exchange (ETDEWEB)

    Pilatowsky, I [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico (Mexico); Ramos Niembro, Gaudencio [Comision Nacional para el Ahorro de Energia -CONAE (Mexico); Morillon, David [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (Mexico); Oskam, A. [Centro de Fisica Aplicada y Tecnologia Avanzada, Universidad Nacional Autonoma de Mexico (Mexico)

    2008-04-15

    The domestic sector consumes almost one quarter of the national electrical energy. In order to reduce in an important manner the power consumption in dwellings there is an integral alternative based on three elements: the bio-climatic design, the saving and efficient use of the energy in equipment and apparatuses, and the use of centralized air conditioning systems. Besides saving the electrical and thermal power consumption, with this scheme, comfort conditions are pretended to be reached in dwellings and, contributing at the same time, to the diminution of polluting emissions. [Spanish] El sector domestico consume casi una cuarta parte de la energia electrica nacional. Con objeto de reducir de manera importante el consumo de energia en las viviendas, se presenta una alternativa integral, basada en tres elementos: el diseno bioclimatico, el ahorro y uso eficiente de la energia en equipos y aparatos, y la utilizacion de sistemas de climatizacion centralizados. Ademas del ahorro en el consumo de energia electrica y termica, con este esquema se pretende alcanzar condiciones de confort en las viviendas y, al mismo tiempo, contribuir a la disminucion de emisiones contaminantes.

  12. Disseny i optimització d'una casa bioclimàtica alpina

    OpenAIRE

    Llovera Massana, Jordi

    2009-01-01

    La present tesi doctoral correspon a l'estudi i optimització energètica d'una casa solar i bioclimàtica situada en una zona amb clima alpí, on la temperatura mínima exterior és de -12ºC. Es tracta d'un habitatge unifamiliar, situat a la població d'Engordany, al Principat d'Andorra, a 1260 metres sobre el nivell del mar.L'habitatge es va construir els anys 1999 - 2000 amb tots els critèris de sostenibilitat del moment, i s'ha habitat des de llavors.Es tracta d'un edifici solar passiu i actiu, ...

  13. Present, future, and novel bioclimates of the San Francisco, California region.

    Directory of Open Access Journals (Sweden)

    Alicia Torregrosa

    Full Text Available Bioclimates are syntheses of climatic variables into biologically relevant categories that facilitate comparative studies of biotic responses to climate conditions. Isobioclimates, unique combinations of bioclimatic indices (continentality, ombrotype, and thermotype, were constructed for northern California coastal ranges based on the Rivas-Martinez worldwide bioclimatic classification system for the end of the 20(th century climatology (1971-2000 and end of the 21(st century climatology (2070-2099 using two models, Geophysical Fluid Dynamics Laboratory (GFDL model and the Parallel Climate Model (PCM, under the medium-high A2 emission scenario. The digitally mapped results were used to 1 assess the relative redistribution of isobioclimates and their magnitude of change, 2 quantify the loss of isobioclimates into the future, 3 identify and locate novel isobioclimates projected to appear, and 4 explore compositional change in vegetation types among analog isobioclimate patches. This study used downscaled climate variables to map the isobioclimates at a fine spatial resolution -270 m grid cells. Common to both models of future climate was a large change in thermotype. Changes in ombrotype differed among the two models. The end of 20(th century climatology has 83 isobioclimates covering the 63,000 km(2 study area. In both future projections 51 of those isobioclimates disappear over 40,000 km(2. The ordination of vegetation-bioclimate relationships shows very strong correlation of Rivas-Martinez indices with vegetation distribution and composition. Comparisons of vegetation composition among analog patches suggest that vegetation change will be a local rearrangement of species already in place rather than one requiring long distance dispersal. The digitally mapped results facilitate comparison with other Mediterranean regions. Major remaining challenges include predicting vegetation composition of novel isobioclimates and developing metrics to

  14. Risk control in energy saving projects; Control de riesgo en los proyectos de ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Evan [Lawrence Berkeley National Laboratory, CA (United States)

    2005-10-15

    Since one of the restrictive problems when investing in energy saving is the uncertainty of obtaining the planed savings, a technique in the risk handling for energy efficiency projects, called Insurance for the Energy Saving (IES) is presented. IES economically stimulates those who implement projects for energy saving so they go beyond the normal measures and really obtain significant saving levels, thus contributing to the fulfillment of national objectives in energy saving. In order to reduce the risk of low performance in energy caused by saving projects there exist the international performance measurement and the protocol of investment (IMPVP) as well as diagnoses and starting processes, whereas in order to transfer the financial risk that a saving project represents, mechanisms such as FDIC insurance, conversion of the debt in values, Saving's Guarantees, Performance Bonuses or Guarantee Bonuses and Insurances for Energy Saving can be of great help. This article deals on the IES insurance policies, their loss control management, successful cases, benefits, particular advantages, place in the market and refers argued insurance exceptions and perception surveys. [Spanish] Dado que uno de los problemas restrictivos a la hora de invertir en el ahorro de energia es la incertidumbre de obtener los ahorros proyectados, se presenta una tecnica en el manejo del riesgo para proyectos de eficiencia energetica llamada Seguro para el Ahorro de Energia (SAE). SAE estimula financieramente a quienes implementan proyectos para el ahorro de energia con el fin de que vayan mas alla de las medidas normales y consigan niveles significativos de ahorro, contribuyendo asi al cumplimiento de objetivos nacionales de ahorro energetico. Para reducir el riesgo de bajo desempeno de energia provocados por proyectos de ahorro existe la medicion del desempeno internacional y el protocolo de inversion (IMPVP) asi como diagnosticos y procesos de arranque, mientras que para transferir el

  15. Conductas de ahorro en América Latina: panorámica general y aspectos de políticas

    OpenAIRE

    Michael Gavin; Ricardo Hausmann; Ernesto Talvi

    1997-01-01

    (Disponible en idioma inglés únicamente) Este trabajo es un aporte y una revista del debate de políticas en cuanto al aspecto del ahorro en América Latina, y se presenta una perspectiva nueva de la relación entre el ahorro y el crecimiento, entre el ahorro y la estabilización de la inflación y la reforma estructural, y entre el ahorro y los ingresos de capitales.

  16. Vegetation-Soil-Active Layer Relationships Along a Low-Arctic Bioclimate Gradient, Alaska

    Science.gov (United States)

    Walker, D. A.; Jia, G. J.; Epstein, H. E.; Shiklomanov, N.; Nelson, F.; Hinzman, L. D.; Romanovsky, V. E.

    2002-12-01

    Northern Alaska has three of five Arctic bioclimate subzones, which are representative of the circumpolar Low Arctic. This portion of the Arctic has more or less continuous tundra plant cover and well-developed moss canopies. We examined the biomass and remotely sensed spectral properties of the vegetation canopy, active-layer thickness, and the soil properties at 21 sites on the Arctic Slope and Seward Peninsula of Alaska. The sites were grouped into three bioclimate subzones according the summer warmth at the sites. The summer warmth index (SWI) is the sum of the mean monthly temperatures greater than 0 degrees C. Subzone C, the coldest subzone, occurs in a narrow strip along the northern coast of the Alaska. Subzone D covers most of the Arctic Coastal Plain and the northwest portion of the Seward Peninsula, and Subzone E covers most of the Foothills and most of the unforested portion of the Seward Peninsula. The SWIs in Subzones C, D, and E are generally less than 10-15 degrees C, 15-25 degrees C, and 25-35 degrees C respectively. The average active layer depths were 44, 55, and 47 cm respectively The shallow active layer in Subzone E is to a large degree a response to the denser vegetation canopies in Subzone E. Total plant biomass in Subzone C, D, and E averaged 421 g m-2, 503 g m-2, and 1178 g m-2 respectively. The much higher biomass in Subzone E was due primarily to woody shrubs (40 g m-2 in Subzone C, 51 g m-2 in Subzone D, and 730 g m-2 in Subzone E). The normalized difference vegetation index (NDVI) is one measure of greenness. Highest NDVI values were obtained from acidic tundra regions in Subzone E, and the lowest NDVI values were obtained in the nonacidic areas of Subzone C. In summary, the insulative properties of the vegetation play a very important role controlling the thickness of the active layer, and the amount of vegetation biomass differs according to summer warmth and soil properties. Acidic soils in the warmest parts of the Arctic (Subzone E

  17. Interactive applications for energy saving; Aplicaciones interactivas para ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Adame Gonzalez, Alejandro; Ramirez Anaya, Cesar; Gutierrez, Hector; Dominguez Ojeda, Xerxes; Aguilar Galvan, Alfredo [Ingenieria Energetica Integral S. A. de C. V., Mexico, D. F. (Mexico)

    1998-12-31

    A series of ideas are presented that can help in the development of interactive applications for energy saving. Emphasis is made on the Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE)`s Interactive Course on Demand Management and Power Factor Compensation, in order to demonstrate how far one can go with the multimedia development. [Espanol] Se presenta un conjunto de ideas que pueden auxiliar en la elaboracion de aplicaciones interactivas para ahorro de energia. Se hace principal enfasis sobre el curso interactivo Administracion de la Demanda y Compensacion del Factor de Potencia del Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) con la finalidad de mostrar hasta donde puede llegarse con un desarrollo multimedia.

  18. The EC BIOCLIM Project (2000-2003), 5. Euratom Framework Programme - Modelling sequential biosphere systems under climate change for radioactive waste disposal

    International Nuclear Information System (INIS)

    Marianne Calvez (ANDRA, France) presented the new EC BIOCLIM project that started in 2001. Its main objective is to provide a scientific basis and practical methodology for assessing the possible long-term impacts on the safety of radioactive waste repositories in deep formations due to climate driven changes. She explained that BIOCLIM objective is not to predict what will be the future but will correspond to an illustration of how people could use the knowledge. The BIOCLIM project will use the outcomes from the Biomass project. Where Biomass considered discrete biospheres, the BIOCLIM project will consider the evolution of climate with a focus on the European climate for three regions in the United Kingdom, France and Spain. The consortium of BIOCLIM participants consists of various experts in climate modelling and various experts and organisations in performance assessment. The intent is to build an integrated dynamic climate model that represents all the important mechanisms for long-term climate evolution. The modelling will primarily address the next 200000 years. The final outcome will be an enhancement of the state-of-the-art treatment of biosphere system change over long periods of time through the use of a number of innovative climate modelling approaches and the application of the climate model outputs in performance assessments

  19. Energy saving in the sugar cane agroindustry; Ahorro de energia en la agroindustria azucarera canera

    Energy Technology Data Exchange (ETDEWEB)

    Zedillo Ponce de Leon, Luis [Grupo de paises Latinoamericanos y del Caribe exportadores de azucar (Mexico)

    1996-07-01

    The traditional sugar mill is inefficient from the energy point of view. Most of the sugar mills were designed to use all the available bagasse, due to the risk of spontaneous ignition and environmental pollution. Consequently, the steam generators, the turbines and other components were designed to work with low efficiencies. Each ton of sugar produced generates a power potential equivalent to four to six oil barrels (bagasse and residues). That is to say, a sugar mill is capable of producing 500 ton/day of sugar, equivalent to an oil well of 2000 to 3000 barrels/day and one thermoelectric power plant of 15,000 kW. Under this context an analysis is made of the sugar mills in Latin America and the Caribbean as one of the ways of increasing their efficiency and obtain great energy savings. As far as steam generation the appropriate use of energy is dictated by the boilers' efficiency. [Spanish] El ingenio azucarero tradicional es ineficiente desde el punto de vista energetico. La mayoria de los ingenios azucareros se disenaron para usar todo el bagazo disponible, debido al riesgo de ignicion espontanea y contaminacion. En consecuencia, los generadores de vapor, las turbinas y demas componentes fueron disenados para trabajar con bajas eficiencias. Cada tonelada de azucar producida genera una potencialidad energetica equivalente de cuatro a seis barriles de petroleo (bagazo y residuos). Es decir, un ingenio capaz de producir 500 ton/dia de azucar equivalente a un pozo de petroleo de 2000 a 3000 barriles/dia y una termoelectrica de 15000 kW. Bajo este contexto se hace un analisis del ingenio azucarero en Latinoamerica y el Caribe como una de las vias para incrementar su eficiencia y lograr grandes ahorros en la energia. En cuanto a generacion de vapor se refiere, el buen uso de la energia viene expresado por la eficiencia de las calderas.

  20. Actualización del Atlas Bioclimático del estado de Jalisco

    Directory of Open Access Journals (Sweden)

    Hermes Ulises Ramírez Sánchez

    2013-01-01

    Full Text Available En esta nueva versión del Atlas Bioclimático del estado de Jalisco, se hace una descripción más detallada de las condiciones climáticas por municipios del estado, ob- tenidas a partir de una metodología más actualizada y con una mayor base de datos meteorológicos, que en la versión anterior, realizada por Gómez Amador en SEMADES (2009. Se utilizaron los datos procesados de las Normales Clima- tológicas de 1971-2000 del Servicio Meteorologico Nacional (SMN de la Comisión Nacional del Agua (CONAGUA. Los mapas fueron elaborados en el sistema de información geográfica (SIG ArcGis 9.3, con temporalidad mensual y anual. Se observa que en los meses de enero a mayo el bioclima predominante en la mayoría del estado es el seco extremoso, seguido del templado y frío, pero a partir del mes de junio el dominante cambia a cálido, seguido del templado. El mes de julio vuelve a cambiar predominando el templado, seguido de los cálidos, y agosto se caracteriza por tener bioclimas cálidos; posteriormente, de septiembre a octubre se vuelven a presentar los templados seguidos de los cálidos. Finalmente en noviembre y diciembre reaparece el seco extremoso como dominante y resurgen los templados y frío. En cuanto a la distribución anual, dado que los promedios equilibran los valores extremos, la mayoría del estado presenta bioclima templado.

  1. Bioconstrucción y arquitectura bioclimática para la ejecución de vivienda unifamiliar

    OpenAIRE

    LÓPEZ GARRIDO, DANIEL

    2016-01-01

    [ES] Este trabajo final de grado, estudia diferentes formas de construir una vivienda aplicando criterios de bioconstrucción y arquitectura bioclimática. Para ello se realizó la búsqueda de un solar cuya ubicación y características cumplieran los requisitos para la construcción de una vivienda de este tipo. Para el diseño de la vivienda se utilizan el mayor número de elementos naturales, reciclados o que sean altamente reutilizables y reciclables. Otro de los puntos que se ha estudiado en pro...

  2. Seasonal Changes in Leaf Tissue Rehydration of One Annual and Two Perennial Grass Forage Species Induced by Bioclimate

    Directory of Open Access Journals (Sweden)

    Eirini - Ia KAPSALI

    2015-12-01

    Full Text Available Bioclimate signifies the continuous interplay between plants and climate factors (primarily drought and has a direct impact on the water relations and the duration of the rehydration process in water stressed plants. To explore the association between bioclimate and water physiology of forage species in semi-arid Mediterranean grasslands, we determined the seasonal variation in leaf water potential, turgid weight and relative water content in wild growing Dactylis glomerata L., Bromus inermis Leyss (perennial and Bromus sterilis L. (annual during the growing season. The study was conducted at the farm of the Aristotle University of Thessaloniki. The results of the current study reveal that B. sterilis maintained high levels of water potential most probably by accelerating its biological cycle and decreasing water content because it fails to sustain turgidity. Dactylis glomerata and B. inermis presented even higher water contents than B. sterilis for the same water potential. Dactylis glomerata exhibited substantially higher water potential and content than B. inermis by keeping the rehydration duration stable. The extensive creeping rhizome seems to allow B. inermis to sustain high values of water potential and content possibly ensuring turgidity. Regardless of the grass species the duration of rehydration ranged from 2.5 to 3.5 hours throughout the growing season. Our findings demonstrate that (a D. glomerata and B. inermis are better adapted to Mediterranean semiarid conditions than B. sterilis and (b turgid weight in Mediterranean forage species can safely be determined after a rehydration period of 3.5 hours.

  3. La reforma del sistema financiero: cajas de ahorros.- (Años 2011-2012

    Directory of Open Access Journals (Sweden)

    Octavio Vázquez Sotelo

    2013-04-01

    Full Text Available Este trabajo forma parte del libro “La dimensión social de las Cajas de Ahorro: España y Galicia”, publicado por la Editorial Académica Española, del cual soy autor.A través de la legislación promulgada en los años 2010, 2011 y 2012, se analiza la estrategia de privatización de las Cajas de Ahorro seguida por los gobiernos de turno que, en la mayor parte de los casos, ha supuesto la entrega de las mismas a precios irrisorios a su tradicionales competidores: la gran Banca.. Ello ha comportado la desfiguración o, incluso, la desaparición del rasgo más distintivo de aquellas: la Obra Social.

  4. Instituciones microfinancieras y cajas de ahorro en Santo Tomás Hueyotlipan, Puebla

    Directory of Open Access Journals (Sweden)

    Kristiano Raccanello

    2014-01-01

    Full Text Available La exigua presencia de los intermediarios financieros formales en los municipios rurales mexicanos impulsa el uso de tandas y solicitud de dinero a prestamistas, familiares o amigos. Las cajas de ahorro constituyen una alternativa a estos métodos tradicionales y aprovechan el capital social comunitario. Esta investigación, fundamentado en una muestra realizada en el municipio de Santo Tomás Hueyotlipan (Puebla, México, analiza los factores que impulsan la participación en las cajas de ahorro informales y su interacción con otros intermediarios financieros informales. Los resultados del modelo probit indican que la participación responde a la posibilidad de poder ahorrar atrayendo a aquellos individuos que no utilizan tandas, prestamistas o deudas con familiares o amigos.

  5. El efecto del alfabetismo financiero en el ahorro para el retiro en México.

    OpenAIRE

    F. Alejandro Villagómez; Alayn González

    2014-01-01

    En este trabajo analizamos si es posible incrementar el ahorro para el retiro por medio de alfabetismo financiero en México. Con información de la Encuesta Nacional de los Niveles de Vida de los Hogares 2005 (ENNVIH-2) construimos un índice de alfabetizo financiero siguiendo la metodología propuesta por Atkinson y Messy (2012) que considera tres factores: conocimiento, actitudes y comportamiento financiero. Nuestros resultados sugieren que el alfabetismo financiero tiene un impacto positivo e...

  6. Potential of bioclimatic architecture for energy saving in buildings; Potencial de la arquitectura bioclimatica para ahorro de energia en edificios

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, Jose Roberto [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

    1994-12-31

    The design and construction of current buildings has been characterized, most of all, in the last 30 years, for the lack of consideration in the design process of aspects that nowadays represent a fundamental importance. These aspects are related to energy conservation and environmental protection, with man as the main center of attention for the optimum satisfaction of its physiological as well as psychological needs. In this paper are presented the causes for the lack of consideration of the mentioned aspects and guidelines to follow are set forth for their integration in the design process. Also the architecture potential with a bioclimatic approach is analyzed, for energy saving in buildings. [Espanol] El diseno y construccion de edificios contemporaneos se ha caracterizado, sobre todo en los ultimos treinta anos, por la falta de consideracion en el proceso de diseno, de aspectos que hoy en dia revisten una importancia primordial. Estos aspectos se relacionan con la preservacion de la energia y del medio ambiente, teniendo al hombre como principal centro de atencion, para la satisfaccion optima de sus necesidades, tanto fisiologicas como psicologicas. En este trabajo, se presentan las causas de la falta de consideracion de los aspectos antes citados y se plantean las pautas a seguir para su integracion en el proceso de diseno. Asi mismo, se analiza el potencial de la arquitectura con un enfoque bioclimatico, para ahorro de energia en los edificios.

  7. Zoneamento bioclimático da ovinocultura no Estado do Paraná

    Directory of Open Access Journals (Sweden)

    Barbosa Orlando Rus

    2001-01-01

    Full Text Available Utilizaram-se 45 fêmeas ovinas adultas (15 Hampshire Down [HD], 15 Texel [TE] e 15 Ile de France [IF], para propor um zoneamento bioclimático da ovinocultura no Estado do Paraná. Mediram-se a temperatura retal (Tr, da epiderme (Te, do interior do velo (Tiv e da superfície do velo (Tsv; a frequência respiratória (Fr; a temperatura do ar (Ta, pressão de vapor (e, velocidade do vento (v e carga térmica radiante (CTR. O Índice de Conforto Térmico utilizado foi ICT= 0,6678Ta + 0,4969e + 0,5444Tg + 0,1038v. A regressão do ICT sobre Tr mostrou efeito quadrático para as três raças. Para ICT=24,3, 27,3 e 20,6, os valores de Tr foram respectivamente: 39,10ºC para a raça HD, 39,05ºC para TE e 39,09ºC para IF, atingindo 40,40; 40,50; e 40,28ºC, respectivamente, para ICT=58. As três raças aumentaram sua Tr a partir de ICT=26, com a TE apresentando menor Tr até o valor ICT=46; neste ponto, as três raças foram semelhantes, tendo a TE apresentado maiores valores. Para ICT igual a 27,6; 29,7; e 27,0, os valores de Fr foram, respectivamente, 89,63; 77,08; e 78,77 resp./min., para as raças HD, TE e IF. A raça TE apresentou menor Fr (77,08 resp./min., para ICT=29,7 e para ICT=48, valores semelhantes aos da IF (181,96 resp./min.; a partir deste índice, passou a ser maior que as demais raças, atingindo valores de 288,66 resp./min. no ICT=56, porém inferior à HD (289,01 resp./min.. Neste índice, a raça IF foi a que apresentou a menor Fr (275,72 resp./min.. Uma extensa faixa ao longo do litoral do Estado, entrando cerca de 200 km para o interior até os limites das cidades de Castro, Telêmaco Borba, Laranjeiras do Sul e Pato Branco, permite a criação das três raças, sem exigir grandes esforços de termorregulação.

  8. Nissan Mexicana. First place in national prize of electrical energy saving 1998; Nissan Mexicana. Primer lugar en premio nacional de ahorro de energia electrica 1998

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez S, Enrique [Nissan Mexicana, S.A. de C.V., Planta Civac, Cuernavaca, Mor. (Mexico)

    1999-07-01

    For Plant CIVAC of Nissan Mexicana, the energy saving began in the year of 1990. From then, different programs have been developed using different strategies for energy saving until arriving at the Benchmarking with other Plants of Japan, which represents a new challenge, since it opened up an area of opportunity of saving in processes that generally were known in detail as far as to its main function (to make vehicles with quality, cost and opportunity of delivery), but the parameter of energy consumption of by unit and its benefits in relation to the cost was unknown. This was endorsed by the high Direction and began with the optimization of training for the operation of each equipment with the involvement of the user (Production), the engineering area (that establishes the process) and the maintenance area. We designed a general program where the basic activities were included, such as the general and special activities. Each one of them fulfilled its objective, but the special activities took us to the optimization of the processes, finding excess of energy in the design conditions. [Spanish] Para Planta CIVAC de Nissan Mexicana, el ahorro de energia se inicio en el ano de 1990. A partir de entonces se han desarrollado programas de ahorro de energia usando estrategias diferentes hasta llegar al Benchmarking con otras Plantas de Japon, el cual representa un reto nuevo, ya que puso al descubierto una area de oportunidad de ahorro en los procesos que por lo general se conocian a detalle en cuanto a la funcion principal (hacer vehiculos con calidad, costo y oportunidad de entrega), pero se desconocia el parametro de consumo de energia por unidad y sus beneficios en relacion con el costo. Esto fue avalado por la alta Direccion y se inicio con la capacitacion de la optimizacion de la operacion de cada equipo y se involucro al usuario (Produccion), al area de ingenieria (que establece el proceso) y al area de mantenimiento. Elaboramos un programa general donde se

  9. Diagnóstico del potencial de ahorro energético en instalaciones eléctricas industriales

    OpenAIRE

    Herrera Ramos, Francisco

    2014-01-01

    Los diagnósticos energéticos se definen como un análisis energético básico y son el comienzo de cualquier plan de eficiencia y ahorro energético, ya que en él se estudian y se diagnostican los principales puntos de ahorro energético y económico de una organización. En la mayoría de los casos, los diagnósticos, no tendrán el alcance suficiente para proponer medidas de eficiencia energética, pero si se hallaran potenciales de ahorro económico en los cuales se puede apoyar la realización de a...

  10. Electric energy saving in the cellulose and paper industry; Ahorro de energia electrica en la industria de celulosa y papel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    This paper delineates the results of the demonstration project for electric energy saving, which is one of the twenty four projects in which the Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) sponsors the diagnosis as well as the applied measures and the measures currently in application. Also the potential opportunity areas and the measures applied and in course of application, as well as the required investments and their recuperation periods. [Espanol] En este trabajo se describen los resultados del proyecto de demostracion de ahorro de energia electrica que es uno de los veinticuatro proyectos, en los que el Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) financia tanto el diagnostico como la aplicacion de medidas. Se presentan tanto las areas de oportunidad, potenciales y medidas aplicadas y en aplicacion, asi como las inversiones requeridas y los periodos de recuperacion de las mismas.

  11. La obra social de las cajas de ahorros: un análisis exploratorio

    OpenAIRE

    Félix Javier López Ituarriaga; Rafael Cepeda; Pablo Victor Cornejo Durán; Eduardo Salvador Ansola

    2007-01-01

    En el presente trabajo se clasifican las actividades de la obra social de las cajas de ahorros y se analiza el efecto que el tamaño de la entidad y la participación de las Administraciones Públicas tiene en la orientación de la obra social. Nuestros resultados muestran claras diferencias entre las cajas de modo que las entidades más grandes tienden a financiar actividades de carácter socio-sanitario en detrimento de las actividades culturales y de tiempo libre. La presencia ...

  12. El gobierno de las cajas de ahorro españolas

    Directory of Open Access Journals (Sweden)

    Valentín Azofra Palenzuela

    2004-01-01

    Full Text Available Nuestra reflexión sobre el gobierno de las cajas de ahorro españolas pretende alertar del riesgo de politización de sus órganos rectores y de sus consecuencias para la estabilidad e imagen de estas entidades y, en última instancia, para su eficiencia técnica y asignativa. A este respecto, nuestro análisis proporciona también una cierta evidencia empírica a favor de la hipótesis de que cuanto más politizado está el consejo de administración de las cajas menor es su eficiencia.

  13. Cerramientos bioclimáticos para climas cálidos húmedos: la cuarta vivienda

    Directory of Open Access Journals (Sweden)

    Mustieles, F.

    1998-02-01

    Full Text Available In intertropical latitudes such as Venezuela with hot humid climates, building envelopes must reduce influence of solar radiation, and in these, roofs and windows must receive special attention. Venezuela is also the country with the highest energy consumption per capita in Iberoamérica, much of which is generated by air conditioning systems in residential buildings, and Maracaibo and the surrounding lake basin have some of the highest temperature and humidity values in Venezuela, which increase energy consumption even more. A bioclimatical house for this climate is proposed. This building incorporates principles from traditional indigenous, colonial and oil company houses in the Maracaibo lake basin to generate a new prototype, called the Fourth House.

    En climas cálidos húmedos como es el caso de grandes regiones de Venezuela, las envolventes deben reducir la influencia de la radiación solar y, por lo tanto, deben recibir atención especial. Venezuela es también el país con más alto consumo energético per capita en Iberoamérica, generado en su mayor parte por el uso de sistemas de aire acondicionado en las edificaciones residenciales. En Maracaibo y en los alrededores del Lago de Maracaibo se registran los valores más altos de temperatura y humedad en Venezuela, lo que incrementa, aún más, el consumo energético de las viviendas de estas regiones. La minimización del impacto de la radiación solar para lograr la reducción del consumo energético con un mayor bienestar térmico ha sido precisamente uno de los objetivos perseguidos con el desarrollo de una nueva vivienda bioclimática para la región del lago de Maracaibo. Esta incorpora principios de las tres viviendas bioclimáticas previas existentes en esa región: el palafito o vivienda tradicional indígena, la vivienda colonial republicana y la vivienda petrolera. Es por ello que esta vivienda ha sido llamada la Cuarta Vivienda.

  14. Plan de empresa y estudio de viabilidad de una consultora especializada en el ahorro y uso eficiente del agua

    OpenAIRE

    Rubio Berástegui, Javier

    2011-01-01

    Este proyecto fin de carrera consta de dos partes bien diferenciadas. En la primera parte se desarrolla el plan de empresa y el estudio de viabilidad de una consultora especializada en el ahorro y uso eficiente del agua, mientras que la segunda parte muestra el desarrollo técnico de un sistema de aprovechamiento de aguas grises para aseos.

  15. Evaluating the Effects of Façade Greening on Human Bioclimate in a Complex Urban Environment

    Directory of Open Access Journals (Sweden)

    Britta Jänicke

    2015-01-01

    Full Text Available The evaluation of the effectiveness of countermeasures for a reduction of urban heat stress, such as façade greening, is challenging due to lacking transferability of results from one location to another. Furthermore, complex variables such as the mean radiant temperature (Tmrt are necessary to assess outdoor human bioclimate. We observed Tmrt in front of a building façade in Berlin, Germany, which is half-greened while the other part is bare. Tmrt was reduced (mean 2 K in front of the greened compared to the bare façade. To overcome observational shortcomings, we applied the microscale models ENVI-met, RayMan, and SOLWEIG. We evaluated these models based on observations. Our results show that Tmrt (MD = −1.93 K and downward short-wave radiation (MD = 14.39 W/m2 were sufficiently simulated in contrast to upward short-wave and long-wave radiation. Finally, we compare the simulated reduction of Tmrt with the observed one in front of the façade greening, showing that the models were not able to simulate the effects of façade greening with the applied settings. Our results reveal that façade greening contributes only slightly to a reduction of heat stress in front of building façades.

  16. Carbon Bonds and the saving of energy; Bonos de carbono y el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Ramirez, Alejandro [NovaEnergia (Mexico)

    2005-07-01

    This document deals with the development of the carbon bond project, the energy saving and the entry into force of the Kyoto Protocol at a world-wide level. In this project Mexico opts for a development model in which the economic growth brakes ties with the discharge of greenhouse effect gases and in which the progress does not mean more damages to our planet. [Spanish] Este documento trata sobre el desarrollo del proyecto de bonos de carbono, ahorro de energia y la entrada en vigor del Protocolo de Kyoto a nivel mundial, en el cual Mexico opta por un modelo de desarrollo en el que el crecimiento economico esta desvinculado de la emision de gases de efecto invernadero y en donde el progreso no signifique mas danos a nuestro planeta.

  17. Energy saving in agricultural pumping equipment; Ahorro de energia en equipos de bombeo agricola

    Energy Technology Data Exchange (ETDEWEB)

    Acosta Torres, R. Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1993-12-31

    This paper analyses the current state of the pumping equipment for agricultural irrigation in Mexico. Because of being of the vertical centrifugal turbine type pumps, the most commonly utilized for this service, the study has been focussed into this equipment, obtaining efficiency and consumption scenarios, as well as the potential energy saving existing in this sector. [Espanol] En el presente articulo se analiza el estado actual de los equipos de bombeo para riego agricola en Mexico, al ser las bombas centrifugas verticales tipo turbina, las mas comunmente utilizadas para este servicio, el estudio ha sido enfocado a estos equipos, obteniendose los escenarios de eficiencias y consumos, asi como, el potencial de ahorro energetico existente en este sector.

  18. Energy conservation in ice manufacturing; Ahorro de energia en la fabricacion de hielo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    This paper shows the results of the energy diagnosis study for ice manufacturing industries. The identified opportunities for conservation and efficient use of energy have allowed the reduction of the electric bill, modernizing at the same time, its installations and addressing inherent aspects of the use of energy producing items; in which the estimated investments are recovered in its major part in a period of a year, the goodness of the investments propitiate the growth and competitiveness required in these days. [Espanol] En este documento se exponen los resultados del estudio del diagnostico energetico para industrias productoras de hielo. Las oportunidades de ahorro y uso eficiente de energia identificadas, han permitido reducir la facturacion energetica, a la par de modernizar sus instalaciones y atender aspectos inherentes al uso de energeticos; en lo cual las inversiones estimadas se recuperan en su mayoria en un ano, las bondades de las inversiones propician un crecimiento y competitividad requerida en estos dias.

  19. Compact fluorescent lamps, innovation for electricity saving; Lamparas fluorescentes compactas, innovacion para el ahorro de electricidad

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, Fernando [Fideicomiso para el Ahorro de Energia Electrica (Mexico); Camacho P, Wendolin E; Villalobos Alarcon, German [Phillips Lighting Mexico (Mexico)

    2007-01-15

    An extremely important resource is electricity because it has provided illumination for homes, buildings and cities in the absence of natural light. Therefore, the human being is considering to save this valuable resource by using sophisticated light bulbs. At the end of the 70's the compact fluorescent lamps appeared. In this article we can disclose the advantages and disadvantages of this technology, and how some years later of its invention, those lamps satisfied the client expectations, due to its cost, electricity saving, longer lifetime, use possibilities, and technological improvements. We can also know how Federal Electricity Commission (CFE) and The Trust Fund for Electric Energy Savings (FIDE) supported a project to favor these lamps to be in the Mexican market. [Spanish] La electricidad es un recurso de suma importancia porque ha contribuido a la iluminacion de casas, edificios y ciudades, ante la ausencia de luz natural, es por ello que se ha buscado ahorrar este recurso tan preciado con el uso de lamparas sofisticadas. Una tecnologia que aparecio a finales de los anos 70 fueron las lamparas fluorescentes compactas. En este articulo encontramos sus ventajas y desventajas, y como despues de algunos anos de su creacion comenzaron a llenar las expectativas del cliente gracias a su costo, ahorro de electricidad, mayor tiempo de vida, posibilidades de aplicacion y mejoras tecnologicas. Asi mismo podemos conocer, el proyecto que se hizo para que esta tecnologia entrara al mercado mexicano, con el apoyo de la Comision Federal de Electricidad (CFE) y del Fideicomiso para el Ahorro de Energia Electrica (FIDE).

  20. Saving of electrical energy in educative institutions; Ahorro de energia electrica en instituciones educativas

    Energy Technology Data Exchange (ETDEWEB)

    Castillo Medina, Gabino [Instituto Tecnologico y de Estudios Superiores de Monterrey Campus Estado de Mexico, (Mexico)

    2003-07-01

    The present work looks for integrating the actions of energy saving that can be applied in educative institutions, not concerning the level or size of the same ones. The actions go from questions of making aware the student population until those involved in the change in the operation, migration and implementation of technology. Without overlooking the formative aspect that the educative institutions have and the social commitment of these last ones. It is important that the saving measures have as mission to achieve a culture focussed to make efficient use of the resources, of energy as well as material. This culture must be born from the classrooms and must transform the way to be and act of the student community that will permeate itself with the society. Let us remember that actions are worth more than words, so the educative institutions must preach with the example. [Spanish] El presente trabajo busca integrar las acciones de ahorro de energia que pueden ser aplicadas en instituciones educativas, no importando el nivel o tamano de las mismas. Las acciones van desde cuestiones de concienciar a la poblacion estudiantil hasta las que involucran el cambio en la operacion, migracion e implementacion de tecnologia. Sin perder de vista el aspecto formativo que tienen las instituciones educativas y el compromiso social de estas ultimas. Es importante que las medidas de ahorro tengan como mision lograr una cultura enfocada a hacer uso eficiente de los recursos, tanto energeticos como materiales. Dicha cultura debe nacer desde las aulas y debe transformar la manera de ser y actuar, de la comunidad estudiantil que se permeara con la sociedad. Recordemos que las acciones valen mas que las palabras, asi que las instituciones educativas deben predicar con el ejemplo.

  1. Energy saving and efficiency in building; Ahorro de energia y eficiencia en edificios

    Energy Technology Data Exchange (ETDEWEB)

    Perez Sanchez, Maria M. [Universidad Autonoma de Yucatan, Merida, Yucatan (Mexico); Pacheco Aguilar, Francisco [Comision Federal de Electricidad, (Mexico)

    2000-07-01

    High energy consumption is one of the serious problems in the world today. Newly, this question has taken on not only economic, but also social and ecological importance. In order to reduce the amount of fossil energy, energy diagnosis are one of the most useful tools for increasing the energy efficiency in buildings. In the Faculty of Engineering, dependency of the Universidad Autonoma de Yucatan, Mexico a program of energy diagnosis was developed under an ongoing project entitled energy savings program, which begun in 1996. This paper describes a methodology about diagnosis building energy consumption building shell and energy efficiency in a case study. No doubt future developments are likely to lead to changes in the estimates. We hope that, nevertheless, this study will contribute to increased energy efficiency in this Faculty. [Spanish] En el mundo actual, uno de los problemas mas serios que se tienen es el elevado consumo de energia, que no solamente representa un problema economico sino que tambien abarca aspectos de indole social y ecologica. Con el fin de reducir el alto costo de la energia fosil, el diagnostico de energia es una de las herramientas mas poderosas para promover la eficiencia de los edificios. En la Facultad de Ingenieria, dependencia de la Universidad Autonoma de Yucatan, Mexico se esta llevando a efecto un diagnostico energetico perteneciente al programa de ahorros de energia que comenzo en el ano de 1996. En este estudio se describe una metodologia de diagnostico de ahorro energetico y eficiencia energetica de la envolvente termica en un estudio del caso, aplicado a los edificios de la Facultad de Ingenieria (FIUADY).

  2. México: la economía de los sectores institucionales, distribución del ingreso, ahorro y crecimiento

    Directory of Open Access Journals (Sweden)

    Roberto Michel Padilla

    2003-01-01

    Full Text Available A partir del análisis de las cuentas nacionales de México por sector institucional se descubre una relación de sustitución perfecta entre el ahorro externo y el ahorro interno. Cambios en la disponibilidad de ahorro externo generan, mediante diferentes mecanismos, variaciones en el mismo sentido en la participación de los salarios y los dividendos en el producto y en sus propensiones al consumo; y en sentido opuesto en el ahorro interno de las empresas. La relación de causalidad es clara; a mayor disponibilidad de ahorro externo mayor ingreso de los hogares y mayor consumo, no al revés. Mediante una reformulación del modelo de N. Kaldor, (1955, para incluir el ahorro externo y diferenciando las ganancias entre dividendos y ganancias retenidas, se formalizan y estiman, econométricamente, las relaciones entre los coeficientes de inversión, ahorro externo y dividendos por un lado y la distribución del ingreso entre salarios y ganancias por otro. Se resalta la importancia estratégica que la conducta económica de los dirigentes empresariales, manifiesta en las decisiones de inversión y en la propensión a distribuir las ganancias , ejerce sobre el crecimiento económico la distribución del ingreso, el consumo, el ahorro y la balanza de pagos. Hasta hoy, México se ha endeudado con el exterior para aumentar su consumo no para ampliar su planta productiva.

  3. Contribución para la caracterización bioclimática del Norte de Portugal. La transición florística atlántico-mediterránea.

    OpenAIRE

    Martins, Alvaro R.; Crespí, Antonio L.; Castro, Adriano; Fernandes, Claúdia P.; Rocha, Joao; de Castro, Carlos; Bernardos, Sonia; Amich García, Francisco

    2008-01-01

    Contribución para la caracterización bioclimática del norte de Portugal. La transición florística atlántico-mediterránea. Este trabajo se incluye en la serie de trabajos ya iniciados por Crespí et al. (2001), con el objetivo de contribuir al conocimiento bioclimático del Norte de Portugal, a través de la información florística presente. En este sentido, y para proceder a una posible cartografia de las áreas biogeográficas naturales desde una perspectiva termopluviométrica, son ahora introduci...

  4. Buenas prácticas ambientales para el ahorro de energía eléctrica

    OpenAIRE

    Estruch Fuster, Alicia Milagro

    2011-01-01

    La guía presenta consejos útiles para reducir el consumo de energía eléctrica en la Universidad Politécnica de Valencia, aunque muchos de ellos pueden ser aplicables al entorno doméstico. Estruch Fuster, AM. (2011). Buenas prácticas ambientales para el ahorro de energía eléctrica. http://hdl.handle.net/10251/9619.

  5. Potential of energy saving with photovoltaic systems; Potencialidad de ahorro de energia con sistemas fotovoltaicos

    Energy Technology Data Exchange (ETDEWEB)

    Guzman S, Eusebio; Bratu S, Neagu [Universidad Autonoma Metropolitana, Mexico, D. F. (Mexico)

    1998-12-31

    This paper presents an approach on the application of photovoltaic systems in energy saving. The problem of the electric energy demand in the coming years is analyzed and its consequences on the environment and on the energy reserves of conventional sources. A model of the electric circuit equivalent to a photovoltaic cell illustrates the behavior of the photovoltaic cell in function of the climatological conditions. The former in order to show some of the limiting factors in this type of generator. Also, the evolution of the applications of the photovoltaic systems and its forecasting in the installed capacity in the next 20 years, is described. [Espanol] En este trabajo se presenta un enfoque de la aplicacion de los sistemas fotovoltaicos en el ahorro de energia. Se plantea el problema del crecimiento de la demanda energetica en los proximos anos y sus consecuencias sobre el medio ambiente y las reservas de energia por fuentes convencionales. Un modelo del circuito electrico equivalente de una celda fotovoltaica ilustra el comportamiento del generador fotovoltaico en funcion de las condiciones climatologicas. Lo anterior con el fin de mostrar algunas limitantes de este tipo de generador. Tambien se describe la evolucion de las aplicaciones de los sistemas fotovoltaicos y el pronostico de la potencia instalada en los proximos 20 anos.

  6. Ahorro energético mediante estrategias de iluminación natural optimizadas

    Directory of Open Access Journals (Sweden)

    Puigdomènech Franquesa, Joan

    1986-04-01

    Full Text Available Electrical charges in buildings and specially in those of commercial use, can be diminished by means of natural lighting strategies. Taking the climate features of our country into consideration, it is necessary to prevent the inconveniences caused by an en erg y excess in summer, so solar Controls are needed. The only practical way to achieve the suitable balance between thermal and light needs, so as to get a monthly or annual energetic balance optimization, is to operate with the computer. A programme with such characteristics is described here. Its application gives important sarings in non renouvable energy savings.Mediante estrategias de iluminación natural es posible disminuir las cargas eléctricas de los edificios y en especial los de uso comercial. Dadas las características climáticas de nuestro país es necesario prever los inconvenientes de un exceso de energía en verano, para lo cual es preciso disponer de controles solares. Encontrar el correcto equilibrio entre las necesidades térmicas y lumínicas en base a la optimización del balance energético mensual o anual es únicamente factible mediante el uso del ordenador. Un programa que responde a estas características es descrito en el presente trabajo, obteniéndose con su aplicación importantes ahorros en el consumo de energías no renovables.

  7. Project of energy saving in compressed air; Proyecto de ahorro de energia en aire comprimido

    Energy Technology Data Exchange (ETDEWEB)

    Automatizacion, Productividad y Calidad S.A. de C.V. Puebla, (Mexico)

    2005-07-01

    The objective of this project is to reduce the operation costs by means of the energy saving through the use of the compressed air system. For this purpose the solenoid valves controlled per time and the manually acted valves of sphere must be replaced by pneumatic purges that remove from the system the condensed humidity without discharging air and which act automatically when the water reaches the level of unloading in its deposit. The pressure level is the reduction of the operation rank of pressure in the compressors, satisfying the operation requirements of the process equipment. [Spanish] El objetivo de este proyecto es reducir el costo de operacion mediante el ahorro de energia en la utilizacion del sistema de aire comprimido. Para ello se tienen que remplazar las valvulas solenoides controladas por tiempo y valvulas de esfera actuadas manualmente por purgas neumaticas que remueven del sistema la humedad condensada sin descargar aire y que actuan en forma automatica al alcanzar el agua el nivel de descarga en su deposito. El nivel de presion es la reduccion del rango de operacion de presion de los compresores, satisfaciendo los requerimientos de operacion de los equipos de proceso.

  8. Cálculo del ahorro de energía por menor fricción

    Directory of Open Access Journals (Sweden)

    Pedro Albarracín Aguillón

    2004-01-01

    Full Text Available En este artículo se expone como disminuir costos de operación (menor consumo de energía, costos de mantenimiento y pérdidas de producción de equipos, mediante el control de los diferentes fenómenos de la fricción en mecanismos lubricados. Para hacer esto posible es necesario conocer las condiciones criticas de trabajo de los mismos, a que tipo de lubricación corresponden, y que clase lubricante requiere, para así calcular los valores de los coeficientes de fricción de los lubricantes que se están empleando y compararlos con los de otros lubricantes que pueden dar lugar a ahorros de energía y mantenimiento. Además se presentan algunos ejemplos tomados de casos reales, que confirman que con una buena implementación de un programa de tribologia se obtienen resultados satisfactorios desde el punto de vista económico.

  9. Energy saving in buildings through the elimination of typical problems; Ahorro de energia electrica en edificios a traves de la eliminacion de problemas tipicos

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Rivero, Alex G. [Genertek, S. A. de C. V., Mexico, D. F. (Mexico)

    1993-12-31

    The enormous electric energy consumption in buildings represents an important area of saving opportunities. The design of installations without advanced technical illumination criteria, the absence of standardization over energy efficiency, the lack of observation of the existing standards and guides, the continuous load growth in existing installations and the lack of appropriate maintenance, are some of the causes of the inefficient use of electric energy in buildings. Although the problems, and consequently the solutions, are exclusive for each unit, some of the former are frequently repeated. In this paper the problems found along more than 40 audits conducted in large buildings of different types in Mexico city are commented. [Espanol] El enorme consumo de energia electrica en edificios representa una importante area de oportunidad para ahorro. El diseno de instalaciones sin criterios luminotecnicos avanzados, la ausencia de normalizacion sobre eficiencia energetica, la falta de observancia de las normas y recomendaciones vigentes, el continuo crecimiento de carga en instalaciones existentes y la falta de mantenimiento adecuado son algunas de las causas del uso ineficiente de la energia electrica en inmuebles. Aunque los problemas y por tanto las soluciones son particulares para cada unidad, algunos de los primeros se repiten frecuentemente. En este trabajo se comentan los problemas encontrados a lo largo de mas de 40 auditorias realizadas a inmuebles grandes de diversos tipos en la ciudad de Mexico.

  10. Bioclim Deliverable D2: consolidation of needs of the European waste management agencies and the regulator of the consortium

    International Nuclear Information System (INIS)

    period, with particular emphasis on the last glacial cycle. The data and information collated in this report for three of these countries (France, Spain and the United Kingdom) will be used within BIOCLIM to guide the development of down-scaling rules for regional climate characteristics and thereby to provide a basis for linking climate model output to system descriptions required for the purposes long-term safety assessment. In each case, the description begins with a summary of the present-day characteristics of the regions/sites of interest, categorized under the following headings: site location and the geology of the region; human communities and land use; topography; climate; litho-stratigraphy; surface water bodies; and biota These site descriptions are then followed by a detailed presentation of the information base that has enabled palaeo-reconstructions of environmental change to be made within each country. The intention is that, by correlating these reconstructions with the global climate record, it will be possible to develop down-scaling procedures that allow the projected effects of future global climate change to be reflected in assumptions about biosphere conditions relevant to long-term radiological safety assessments. Key outputs from the palaeo-environmental analysis for each selected region include: - a narrative description of the sequence of climate change at a regional scale, expressed in terms of simple climate parameters, such as the estimated mean annual temperature, associated with defined time periods. - associated descriptions of environmental change, taking into account the effects on hydrology, soils and vegetation. - identification of key environmental properties associated with a range of 'typical' conditions that have prevailed in different regions of Europe during the last glacial-interglacial cycle. Additional information for the Czech Republic has also been summarised for interest and comparison. Because the information described

  11. Una aproximación al análisis financiero de las cajas de ahorros andaluzas mediante el método multicriterio PROMETHEE

    Directory of Open Access Journals (Sweden)

    Asunción Zapata Reina.

    2000-01-01

    Full Text Available En este trabajo se hace un análisis económico y financiero de las cajas de ahorros andaluzas. Se abordan los diferentes aspectos (estructura patrimonial, estructura de costes, rentabilidad, productividad y solvencia de las seis cajas que configuran el sistema andaluz de cajas de ahorros, agrupadas en la confederación andaluza de cajas de ahorros, por medio de un conjunto de ratios. El gran número y la diversidad de ratios disponibles en el problema, generalmente en conflictos unos con otros, confiere a éste una dimensión multicriterio que analizamos con el método PROMETHEE. Procedimiento que permite sintetizar la información disponible sobre el conjunto estudiado.

  12. Bioconstrucción y arquitectura bioclimática para la ejecución de vivienda ecológica unifamiliar.

    OpenAIRE

    SÁEZ PÉREZ, JOSÉ VICENTE

    2015-01-01

    [ES] El trabajo final de grado a desarrollar pertenece a la modalidad de desarrollo de proyectos técnicos de construcción, en el área de construcción y medio ambiente y trata sobre el levantamiento de una vivienda ecológica unifamiliar, teniendo en cuenta los criterios de Bioconstrucción y arquitectura bioclimática situada en la población de Ayora. Con ello, se persigue la integración de una vivienda a la que la sociedad no está acostumbra, la cual tendrá un comportamiento más óptimo que una ...

  13. Experiences of energy saving and co-generation projects; Experiencias de proyectos de ahorro de energia y cogeneracion

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Barajas, Alberto [Heat and Power Systems, S.A. de C.V., Mexico D.F. (Mexico)

    2005-07-01

    In this document are presented the successful projects of energy saving and co-generation that Heat and Power Systems, S.A. de C.V. has made in diverse industries. The investment recovery periods have been smaller to 18 months. The projects have been made for different companies within Mexican Republic. [Spanish] Se presentan los casos exitosos de proyectos de ahorro de energia y cogeneracion que Heat and Power Systems, S.A. de C.V. ha realizado en diversas industrias cuyo periodo de recuperacion de la inversion han sido menores a 18 meses. Los proyectos han sido realizados para distintas empresas dentro de la Republica Mexicana.

  14. Criterios medioambientales y de ahorro energéctico mediante sistemas pasivos : aplicaciones a una vivienda unifamiliar

    OpenAIRE

    BROCOS RIVAS, CARED DANIELA; TERUEL AVINENT, PABLO

    2012-01-01

    En el proyecto se diseña una vivienda unifamiliar atendiendo a las directrices del CTE DB HE sobre el tema de bioconstrucción, con el objetivo de optimizar los recursos naturales: aprovechamiento de la luz solar, climatización natural, ahorro de agua, aprovechamiento del agua de lluvia, implantación de las energías renovables. Para ello se presta atención a todos los elementos del conjunto edificatorio: fachadas, muros, ventanas, huecos, puentes térmicos, etc., especificando todas sus singula...

  15. La creación de la estrategia en una cooperativa de ahorro y préstamo en Querétaro (México)

    OpenAIRE

    Graciela LARA GÓMEZ; Hurtado Maldonado, Jesús; Maldonado Alcudia, Minerva Candelaria

    2015-01-01

    El trabajo es abordado desde una perspectiva teórica y empírica, donde en principio se retoman vertientes que versan sobre la estrategia y las organizaciones del sector social; para luego plantear la pregunta de investigación ¿Cómo se construyen las estrategias en la cooperativa de ahorro y préstamo? La aproximación metodológica fue la investigación acción, que corresponde al método cualitativo; mientras que el objeto de estudio fue una pequeña cooperativa de ahorro y préstamo ubicada en San ...

  16. El dinero y el ahorro: como las definiciones pueden afectar las políticas

    Directory of Open Access Journals (Sweden)

    Téllez Alicia de

    1993-12-01

    Full Text Available Tile imprecise use of terms such as money, savings, credit, and investment allow for various mix-ups. Several  of them can be cleared up if we take into account that the most important part of the means of payment is that I'lhich serves a different purpose, for which there exists a demand, and I'lhich entails a cost that the community pays in different ways. Money, defined as such, is subject to the laws of supply and demand, and to the control of its volume especially because it is a good which is found in limited quantities. Therefore, money demand is the inverse of the income velocity of money.El uso impreciso de términos tales como dinero, ahorro, crédito e inversión da lugar a diversas confusiones, varias de ellas se despejan si se toma en cuenta que la porción más importante de los medias de pago es aquella que presta un servicio diferente, para el cual existe una demanda y que entraña un costo que la comunidad paga de diversas maneras. El dinero, así definido, está sujeto a  las leyes de la oferta y la demanda y al control de su volumen, en especial porque es un bien que se encuentra en cantidad limitada. Se aclara entonces que la demanda no es más que el inverso de la velocidad ingreso del dinero.

  17. Daylight-saving time: Consumption and demand saving and pollutants emission reduction; El cambio de horario de verano: Ahorros en consumo y demanda, y reduccion de contaminantes

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Gaudencio; Diaz, Rodrigo; Fiscal, Raul; Alquicira, Claudia; Martinez, Serafin; Maqueda, Martin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    This paper presents some of the saving obtained in demand and in fuels with the daylight-saving time, as well as the main aspects considered to make an evaluation of it. [Espanol] Se presentan los ahorros obtenidos en consumo, demanda y combustibles con el cambio de horario de verano, asi como los principales aspectos considerados para efectuar la evaluacion de los mismos.

  18. Bioclim Deliverable D10 - 12: development and application of a methodology for taking climate-driven environmental change into account in performance assessments

    International Nuclear Information System (INIS)

    The BIOCLIM project on modelling sequential Biosphere systems under Climate change for radioactive waste disposal is part of the EURATOM fifth European framework programme. The project was launched in October 2000 for a three-year period. The project aims at providing a scientific basis and practical methodology for assessing the possible long term impacts on the safety of radioactive waste repositories in deep formations due to climate and environmental change. Five work packages have been identified to fulfill the project objectives: - Work package 1 will consolidate the needs of the European agencies of the consortium and summarize how environmental change has been treated to date in performance assessments. - Work packages 2 and 3 will develop two innovative and complementary strategies for representing time series of long term climate change using different methods to analyse extreme climate conditions (the hierarchical strategy) and a continuous climate simulation over more than the next glacial-interglacial cycle (the integrated strategy). - Work package 4 will explore and evaluate the potential effects of climate change on the nature of the biosphere systems. - Work package 5 will disseminate information on the results obtained from the three year project among the international community for further use. The output from the climate models developed and applied in WP2 and WP3 has been interpreted in WP4 ('Biosphere system description') in terms of model requirements for the post-closure radiological performance assessment of deep geological repositories for radioactive wastes, in order to develop a methodology to demonstrate how biosphere systems can be represented in the long-term. The work undertaken in WP4 is described in this report. This report describes the methodology used for identification and characterisation of specific climate states and transitions between those climate states. It also covers the application of those methods in the context of

  19. Energy saving in illumination using sensorial presence devices; Ahorro de energia en iluminacion utilizando sensores de presencia

    Energy Technology Data Exchange (ETDEWEB)

    Cortes Eslava, Alejandro [Universidad Nacional Autonoma de Mexico (Mexico)

    2001-03-01

    This is an analysis and evaluation of electrical energy saving that a system of illumination controlled by presence sensors provides in an enclosure with low transit within the Universidad Nacional Autonoma de Mexico (UNAM) that is one of the libraries of the Institute of Anthropological Investigations. The data on which the analysis is sustained and the results deducted come from a time counter located at the site. [Spanish] Este es un analisis y evaluacion de los ahorros de energia electrica que suministra un sistema de iluminacion controlado por sensores de presencia en un recinto con bajo transito dentro de la Universidad Nacional Autonoma de Mexico (UNAM) que es una de las bibliotecas del Instituto de Investigaciones Antropologicas. Los datos de donde se sustenta el analisis y se deducen los resultados provienen de un contador de tiempo de uso localizado en el sitio.

  20. Electric energy saving and its impact in the mining industry; El ahorro de energia electrica y su impacto en la industria minera

    Energy Technology Data Exchange (ETDEWEB)

    Urteaga Dufour, Jose Antonio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

    1993-12-31

    In this paper are shown the most important results of the energy diagnosis performed in some representative industries of the mining industry, where opportunity areas were detected in electric energy saving, starting from those measures that do not require investment up to the ones that require medium investment, recoverable in less than two years terms as a maximum and with electric energy saving ranging from 10% to 25%. [Espanol] En este trabajo, se presentan los resultados mas importantes, obtenidos en el diagnostico energetico realizado en algunas empresas representativas de la rama de la mineria, en donde se detectaron areas de oportunidad de ahorro de energia electrica que van desde aquellas medidas que no requieren inversiones hasta las que requieren medianas inversiones, recuperables en menos de dos anos como maximo y con ahorros de energia que van desde un 10% hasta un 25%.

  1. Investigación industrial sobre ahorro de energía en la fabricación de nuevos cementos compuestos españoles

    Directory of Open Access Journals (Sweden)

    Puig, J.

    1981-09-01

    Full Text Available Not available

    Se exponen en este trabajo los resultados de un estudio consistente en la preparación de varios cementos nuevos, en diversas fábricas de diferentes zonas del país, basada en la utilización de materiales de adición, tanto activos como fillers calizos, con objeto de contribuir al ahorro energético en la fabricación de cemento. Los nuevos cementos fabricados se comparan con los producidos en la actualidad y se llega a la conclusión de que muchos de ellos permitirán sustanciales ahorros de fuel-oil, sin merma sensible, en la mayoría de los casos —y con mejora en otros— de la calidad y del comportamiento de los cementos nuevos.

  2. Integral programs of energy conservation (exergy) in the petroleum industry; Programas integrales de ahorro de energia (exergia) en la industria petrolera

    Energy Technology Data Exchange (ETDEWEB)

    Rivero Rodriguez, R. [Instituto Mexicano del Petroleo (IMP), Mexico, D. F. (Mexico)

    1995-12-31

    This paper presents some of the fundamental issues related to energy conservation programs in general and to the petroleum industry in particular with the purpose of integrating them both, that is, considering not only the energy issues, but also the ecological and economical aspects. This is achieved by using the two fundamental laws of thermodynamics (the science that studies energy, its characteristics, and its transformations) through the use of the exergy concept, which is a measure of the energy quality and of its withdrawal with respect to the environment. The origins of the present-day technologies, regarding energy conservation, the short, medium and long term general strategies and the implementation stages of the integral programs of energy conservation are presented, and it concludes with a series of general policies aimed at making the energy conservation programs more congruent with the maintenance of a sustainable development. [Espanol] En este trabajo se presentan algunos aspectos fundamentales relacionados con los programas de ahorro de energia en general, y en la industria petrolera en particular, con objeto de lograr que los mismos sean integrales, es decir que consideren no solo los aspectos puramente energeticos, sino tambien los aspectos ecologicos y economicos. Esto se logra utilizando conjuntamente las dos leyes fundamentales de la termodinamica (la ciencia que estudia la energia, sus caracteristicas y sus transformaciones), mediante la utilizacion del concepto de exergia, que es una medida de la calidad de la energia y de su alejamiento con respecto al medio ambiente. Se presentan los origenes de las tendencias tecnologicas actuales en materia de ahorro de energia, las estrategias generales a corto, mediano y largo plazos y las etapas en la implementacion de programas integrales de ahorro de energia, para concluir con una serie de politicas generales tendientes a lograr que los programas de ahorro de energia sean congruentes con el

  3. Energy saving in the management of the BIMBO group distribution fleet; Ahorro de energia en la operacion de la flotilla de distribucion del grupo BIMBO

    Energy Technology Data Exchange (ETDEWEB)

    BIMBO Mexico

    2005-07-01

    In this work BIMBO demonstrates that in order to save energy it is necessary to invest in equipment, parts, research and people. This is why they got involved in the task of developing the projects of fuel cells participating with universities, associations, Secretaria de Energia, Comision Nacional de Ahorro de Energia (National Commission for Energy Saving) (CONAE) and the National Council for Science and Tecnologia (CONACYT), through financial supports with projects of mechanisms of clean development (Kyoto Protocol). For doing it they had to prove different types of fuels: biodiesel, hydrogen, alcohol and hybrids; for them to determine the most profitable and practical thus reducing the energy consumption. With the saving of fuels and lubricants in our vehicles, a greater yield in the company is obtained. [Spanish] En este trabajo BIMBO demuestra que para ahorrar energia hay que invertir en equipo, partes, investigacion y gente. Es por eso que se dieron a la tarea de desarrollar los proyectos de celdas de combustible, participando con universidades, asociaciones, la Secretaria de Energia, la Comision Nacional para el Ahorro de Energia (CONAE) y el Consejo Nacional para la Ciencia y Tecnologia (CONACYT), a traves de apoyos financieros con proyectos de mecanismos de desarrollo limpio (protocolo de Kyoto). Para ello tuvieron que probar diferentes tipos de combustibles: biodiesel, hidrogeno, alcohol e hibridos, para determinar los mas rentables y practicos y asi reducir el consumo de energia; con el ahorro de combustibles y lubricantes en nuestros vehiculos, logrando una mayor rentabilidad en la empresa.

  4. Ahorro de agua y materia prima en los procesos de pelambre y curtido del cuero mediante precipitación y recirculación de aguas

    Directory of Open Access Journals (Sweden)

    SANDRA AGUDELO A.

    2007-01-01

    Full Text Available El principio del proceso de recuperación de cromo, consiste en precipitar el cromo contenido en el licor residual como hidróxido utilizando un álcali; este precipitado se separa por sedimentación y se disuelve nuevamente con ácido sulfúrico. De los resultados obtenidos, se observaron porcentajes de remoción superiores al 99%. Con la recirculación directa de aguas de pelambre fue posible obtener ahorros de agua del 64% y ahorros en materia prima del 32 %, además, con una adecuada selección del tamizador es posible recircular el agua un número máximo de tres veces, sin afectar la calidad del producto final. Así mismo, se comprobó la viabilidad de la recirculación directa de aguas de curtido, con ahorros de materia prima del 17%. Con medidas de este tipo, prácticas y fáciles de implementar, la industria del curtido del cuero podría disminuir considerablemente la contaminación, operar de una forma mas segura y con mayor eficiencia de producción.

  5. Análisis de ahorro energético en iluminación LED industrial: Un estudio de caso

    Directory of Open Access Journals (Sweden)

    Ana Serrano-Tierz

    2015-01-01

    Full Text Available El presente estudio muestra el ahorro económico y las ventajas medioambientales que supone la iluminación industrial con tecnología LED. Se ha planteado un estudio de caso en el que luminarias de halogenuros metálicos han sido sustituidas por luminarias LED. Para validar la sustitución de luminarias con halogenuros metálicos de 400W por LED de 200W, se han efectuado las simulaciones luminotécnicas y mediciones de campo mediante luxómetro. Los resultados obtenidos indican que ambas luminarias son equiparables obteniendo un importante ahorro energético cercano al 50%. Esta investigación demuestra que la tecnología LED ofrece soluciones de iluminación de alto rendimiento que optimizan el ahorro energético reduciendo a su vez costes de mantenimiento con un coste total de propiedad significativamente menor, incrementando la esperanza de vida útil de las luminarias. Desde el punto de vista medioambiental supone una importante reducción en emisiones de CO2 y eliminación de residuos tóxicos como el mercurio.

  6. Projects of electrical energy saving in Costa Rica; Proyectos de ahorro de energia electrica en Costa Rica

    Energy Technology Data Exchange (ETDEWEB)

    Henry Chinchilla [Compania Nacional de Luz y Fuerza, S.A., San Jose (Costa Rica)

    1999-07-01

    Costa Rica, located in Central America, is a highly electrified country, more of the 93.6% of the population, has access to the electricity, and its load curve presents two important demand peaks, one of them near noon and another one at sundown, additionally, the growth of this service is important, reason why it has been oriented to the establishment of actions focussed to the better use of the energy, in special of the electricity. The following notes are intended to show briefly the origin of the actions oriented to the energy saving, identifying the main projects that marked an important track in the national development in this sense, as well as a sample of some of the projects which have permitted to maintain throughout the last decade of this century a permanent attitude on the promotion and education of the saving and handling of the energy demand, specially of electricity, of such a way as to a suitable contribution is achieved towards the industrial competitiveness, human comfort and environmental protection. [Spanish] Costa Rica, ubicado en la America Central, es un pais altamente electrificado, mas del 93.6% de la poblacion, tiene acceso a la electricidad, y su curva de carga presenta dos importantes picos de demanda uno cercano al medio dia y otro al ocultarse el sol, junto a ello el crecimiento este servicio es importante, por lo que se ha abocado a establecer acciones que se orientan al mejor uso de la energia, en especial de la electricidad. En las siguientes notas se trata de mostrar en forma breve el origen de las acciones orientadas al ahorro de energia, identificando los principales proyectos que marcaron una huella importante en el rumbo nacional en este sentido, asi como una muestra de algunos de los proyectos que han permitido mantener a lo largo de la ultima decada de este siglo una permanente actitud de la promocion y ensenanza del ahorro y manejo de la demanda de energia, en especial de la electricidad, de tal forma que se logre con ello

  7. National potential of saving of electricity in domestic refrigeration; Potencial nacional de ahorro de electricidad en refrigeracion domestica

    Energy Technology Data Exchange (ETDEWEB)

    Arroyo C, Fernando [Universidad Nacional Autonoma de Mexico (Mexico); Ambriz G, Juan Jose; Romero P, Hernando [Universidad Autonoma Metropolitana, (Mexico)

    2003-07-01

    In the present paper the evaluation of the potential of saving of electrical energy in Mexico is presented, by means of the substitution of old refrigerators of low efficiency by modern high efficiency ones. This potential is very ample, since the replacement of the old models by new follows a very slow curve, if the economic difficulties of the Mexican families are considered and that, on the other hand, the technology of the domestic refrigerators is so reliable that they have a very long life and they are not easily rejected. In field work have been found refrigerators operating with ages of more than 30 years and still 40. In Mexico, it is estimated that the refrigeration is responsible for around 29% of the of electricity consumption in homes settled in tempered climate and of 14 % in those of warm climate in which air conditioning is used. The proposal of this work is the organization of a governmental program of accelerated substitution of refrigerators that helps to acquire an efficient refrigerator and to reject the old ones. The results indicate that if a total renovation of the park of domestic refrigerators is made, the saving of electrical energy would reach the 5.2 TWh/a which represents the 44.5% of the total consumption of 11.7 TWh in a year. [Spanish] En el presente trabajo se presenta la evaluacion del potencial de ahorro de energia electrica en Mexico, mediante la substitucion de refrigeradores antiguos de baja eficiencia por modernos de alta eficiencia. Este potencial es muy amplio, ya que el reemplazo de los modelos viejos por nuevos sigue una curva muy lenta, si se consideran las dificultades economicas de las familias mexicanas y que, por otro lado, la tecnologia de los refrigeradores domesticos es tan confiable que tienen una vida muy larga y no se desechan facilmente. En trabajos de campo se han encontrado refrigeradores operando con edades de mas de 30 anos y aun 40. En Mexico, se estima que la refrigeracion es responsable de alrededor del

  8. Las puzolanas y el ahorro energético en los materiales de construcción

    Directory of Open Access Journals (Sweden)

    Soria Santamaría, Francisco

    1983-09-01

    Full Text Available This discussion commences with some general comments on the energy crisis and its impact on the cement industry, with the corresponding coal reconversion problems. Three factors are highlighted where saving has been centered: technological process, raw materials and finished product, emphasizing the interest of latter which includes incorporating active additions in Portland cement. A quick review then follows about pozzolanas, their origin, definitions and classification. Their chemical composition is underlined, and the concept of pozzolanic activity is described. Later on, pozzolanic cements, their most significant properties and the advantages of using pozzolana are explained. After a lengthy description about possible applications of pozzolanas and pozzolanic cements, the conclusion reviews current trends in international standards for such cements and possible evolution in consumption of additions by the year 2000, with a view to saving more energy, without impairing the essential properties of the cement.

    Comienza esta exposición con unas consideraciones generales sobre la crisis energética y su impacto en la industria cementera, con los correspondientes problemas de reconversión al carbón. Se mencionan los tres aspectos en que se ha centrado el ahorro energético: proceso tecnológico, materias primas y producto acabado, destacando el interés de este último que incluye la incorporación de adiciones activas al cemento portland. Se hace a continuación un rápido comentario sobre puzolanas, su origen, definiciones y clasificación. Se destaca la composición química de las mismas y se desarrolla el concepto de actividad puzolánica. Más tarde se hace una exposición sobre cementos puzolánicos, sus propiedades más destacadas y las ventajas que supone el empleo de la puzolana. Tras una exposición amplia de las posibles aplicaciones de las puzolanas y cementos puzolánicos, se concluye comentando las tendencias

  9. Program of actions for energy conservation in the equipment for the urban public transportation; Programa de acciones para el ahorro de la energia en los equipos de transporte publico urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Sanhez Arellano, L.I. [Facultad de Ingenieria, Universidad Autonoma del Estado de Mexico, Toluca (Mexico)

    1995-12-31

    The Facultad de Ingenieria of the Universidad Autonoma del Estado de Mexico (UAEM), in its postgraduate program in Transport Engineering carries out research projects aimed at the appropriate operation of the urban public transportation, in the definition of the transportation networks and their exploitation as well as in the energy conservation and efficient use of the energy for its operation. This paper embodies the lines of interest of this program. The proper operation characteristics and the energy consumption of the different types of vehicles used in urban public transportation mainly depend on the application they have been designed for. Nevertheless, an important point is to know, in the most concrete and specific form, the nature and other possible utilization options of the different urban transportation systems, as well as its energy impact and the possibility of a well oriented energy conservation. The purpose of this paper is to present in a concrete manner the different types of vehicles used in the urban public transportation, making an energy comparison, besides setting forth a program of actions tending to the energy saving for the vehicles that nowadays operate in the main cities of our country. The main actions are pointed out and the basic characteristics for their initiation, which can be summarized in three large groups: -action in the proper enterprises and with existing vehicular park. -actions over the management and exploitation of the transportation systems. -action for the utilization of new equipment and more efficient vehicles. A detailed explanation of each one of these actions and their impact on the energy consumption are the final purpose of this study. [Espanol] La Facultad de Ingenieria de la Universidad Autonoma del Estado de Mexico (UAEM), dentro de su programa de Postrado en Ingenieria del Transporte realiza proyectos de investigacion tendientes en la buena operacion de los transportes publicos urbanos, en la definicion de

  10. La arquitectura popular como base de una arquitectura bioclimática. Aplicación al enfriamiento pasivo

    OpenAIRE

    Esteban Sáiz, José Luis

    1986-01-01

    In this work it is described de diversity of popular architectures that can be found in Spain due to the strong climatological influence in the different zones of the country. It is also pointed out their similarity with the architecture of other countries, independently of the connexions existing between their dwellers. The rise of new tendencies in construction has brought the need to investigate on new architectural design adapted to ambient conditions considering thermophysical conce...

  11. Hydraulic speed variators for electrical energy saving; Variadores de velocidad hidraulicos para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Valera Negrete, Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Mexico, D. F. (Mexico)

    1999-07-01

    This paper shows the characteristics and applications of the hydraulic speed variators, where because of the conditions of the industrial processes it is necessary to vary the operation parameters, obtaining therefore an energy saving besides improving the control of these processes. In addition, the technical and economic evaluation is presented of a project of the Mazatlan Fossil Power Plant, in which it is intended to invest in the installation of a hydraulic speed variator connected to the forced draft fan of unit number three, which operates with an induction motor of 1,865 kW (2,500 H.P.), with a Voltage of 4,180 V at 1,180 rpm. [Spanish] El presente trabajo muestra las caracteristicas y aplicaciones de los variadores de velocidad hidraulicos, donde por las condiciones de los procesos industriales sea necesario variar los parametros de operacion, obteniendose asi un ahorro de energia ademas de mejorar el control de dichos procesos. Se presenta ademas la evaluacion tecnica y economica de un proyecto de la Planta Termoelectrica Mazatlan, en donde se pretende invertir en la instalacion de un variador de velocidad hidraulico acoplado al ventilador de tiro forzado de la unidad numero tres, el cual opera con un motor de induccion de 1,865 kW (2,500 H.P.), con un voltaje de 4,180 V y una velocidad de 1,180 rpm.

  12. CAJAS DE AHORROS: UN MODELO DE COMPROMISO CON LA SOCIEDAD / SAVINGS BANKS AND SOCIETY: A MODEL OF COMMITMENT TO SOCIETY

    Directory of Open Access Journals (Sweden)

    Antoni SEGUÍ ALCARAZ

    2012-01-01

    Full Text Available Las entidades de crédito tienen cada vez mayor interés en las cuestiones sociales, como reflejo de un compromiso empresarial para satisfacer la demanda de la sociedad, en general, funcionando de una forma eficiente a medio plazo. El trabajo de campo se realizó a través de una encuesta contestada por 57 entidades de crédito españolas. En las Cajas de ahorros por lo que se refiere al tipo de inversión, se observan correlaciones significativas positivas entre el porcentaje del presupuesto destinado a inversiones en la comunidad y en proyectos medioambientales. Por lo tanto, vemos que cuantas más inversiones se realizan en la comunidad, mayor cantidad se destina a proyectos medioambientales. Por el contrario, se observa una relación negativa entre el porcentaje del presupuesto destinado a inversiones para la comunidad y la materialización de las aportaciones en metálico / The field work was conducted through a questionnaire answered by 57 Spanish institutions. In savings banks as regards the type of investment, there are significant positive correlations between the percentage of the budget for investment in community and environmental projects. Therefore, we see that the more investments are made in the community, the greater amount is allocated to environmental projects. On the contrary, there is a negative relationship between the percentage of the budget for investment in the community and the realization of cash contributions.

  13. Energy saving by the use of polystyrene in construction; Ahorro de energia por la utilizacion de poliestireno en la construccion

    Energy Technology Data Exchange (ETDEWEB)

    Pimentel, Raul [Polioles S. A. de C. V., Mexico, D. F. (Mexico)

    1992-12-31

    In the past last years, the building industry has been faced with requirements in the rational energy use and environmental preservation. The polystyrene foam is a material that for more than forty years has demonstrated its attributes all over the world in its application in the construction industry as well as in the packing and crating industries, becoming a synonym of economic construction in regard to energy saving and a synonym also of a rational and safe packing. In this paper a short description is made of the manufacturing process of the expandable polystyrene foam, its properties and applications in the construction industry. [Espanol] En los ultimos anos, la industria de la construccion se ha enfrentado a exigencias en el uso racional de la energia y en la preservacion del medio ambiente. La espuma de poliestireno expansible es un material que por mas de cuarenta anos, ha demostrado sus cualidades a nivel mundial en su aplicacion tanto en la industria de la construccion como en la del empaque y embalaje, llegando a convertirse en sinonimo de una construccion economica en cuanto a ahorro de energia y sinonimo tambien de un embalaje racional y seguro. En este trabajo se hace una breve descripcion del proceso de fabricacion de la espuma de poliestireno expandible, sus propiedades y aplicaciones dentro de la industria de la construccion.

  14. Edificio de oficinas del Monte de Piedad y Caja de Ahorros de Sevilla-España

    Directory of Open Access Journals (Sweden)

    Población Knappe, Eleuterio

    1981-03-01

    Full Text Available Architect The essential feature of the new building of the Pawnshop and Savings Bank in Seville, built on a site in an «L» form and affected in the course of the planning and building by successive changes of Ordenances, its attempt to harmonize with the surrounding architecture, respecting its traditional characteristics. The building, which has seven stories on a slope and two basements, broadcasts its different private and public missions by the volumes, forms and different exterior treatments, presenting particular attention to its functionality in accordance with the initial programme proposed by the organisation.

    La característica esencial de la nueva sede del Monte de Piedad y Caja de Ahorros de Sevilla, levantada sobre un solar en forma de «L» y afectada en el transcurso del proyecto y construcción por sucesivos cambios de Ordenanzas, armoniza con la arquitectura circundante, respetando sus características tradicionales. La edificación, de siete plantas sobre rasante y dos sótanos, patentiza su distinta misión privada y de cara al público a través de los volúmenes, formas y diferentes tratamientos exteriores, presentando una especial atención a su funcionalidad de acuerdo con el programa inicial planteado por la entidad.

  15. La ordenanza bioclimática de Tres Cantos, Madrid. Últimos avances en planificación ambiental y sostenible./ The ordinance bioclimatic Tres Cantos, Madrid. Recent developments in environmental planning and sustainable.

    Directory of Open Access Journals (Sweden)

    Higueras García, Ester

    2009-06-01

    Full Text Available Aunque es de todos reconocida la importancia de planificar con criterios ambientales, son muy pocos los casos en los que estos criterios pasan de los objetivos a las propuestas. En el caso de la localidad de Tres Cantos (Madrid se ha obtenido un importante reto: la aprobación de una ordenanza, denominada Ordenanza Bioclimática, que impulsa el desarrollo urbano equilibrado con su territorio, reduce los consumos de suelo y agua, es respetuosa con el paisaje e incentiva la edificación bioclimática frente a otras convencionales./Despite the well-known relevancy of environmental criteria relating to urban planning, they often remain as objectives and do not become proposals. In the case of Tres Cantos, an important challenge has been proposed: the approval of an ordinance, called Bioclimatic Ordinance, that promotes a proportional urban development relating to the territory, that reduces the use of ground and water, that is respectful towards the landscape and encourages bioclimatic construction against the traditional one.

  16. Incidencia del clima local en los procesos de planificación territorial: Análisis bioclimático de la Costa del Sol Occidental de Málaga (España

    Directory of Open Access Journals (Sweden)

    José Luis Pérez

    2015-01-01

    Full Text Available Frente al excesivo consumo energético en el acondicionamiento térmico residencial, este estudio investiga la implicancia del clima local en las estrategias de expansión urbana, así como su grado de afección a las condiciones de confort, en el contexto mediterráneo español de la Costa del Sol Occidental. Para ello se realiza un análisis bioclimático territorial, identificando los diversos climas locales existentes y las diferentes respuestas biológicas asociadas a cada uno de ellos. Con estos resultados se elabora una clasificación del lugar desde la óptica de la idoneidad bioclimática. Esta herramienta ha permitido evaluar los procesos de planificación territorial, concluyéndose que el 80,6% del suelo urbano y urbanizable no se beneficia de las condiciones climáticas más favorables, las cuales constituyen el 47,3% del territorio analizado. Esta información, puesta al servicio de mejorar las condiciones térmicas de las ciudades, puede ser útil en el diseño y distribución de futuras áreas urbanas.

  17. Energy saving in the house of social interest by means of the application of the power efficiency standard:NOM-020; Ahorro de energia en la vivienda de interes social mediante la aplicacion de la norma de eficiencia energetica: NOM-020

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Jimenez, Rodolfo; Morillon Galvez, David [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2001-07-01

    In face of the urgent necessity of saving and of using in an efficient way the energy, the Secretariat of Energy (Sener) through the Comision Nacional para el Ahorro de Energia, (CONAE) (National Commission for Energy Saving) has promoted the design and application of different measures and programs of energy efficiency. The elaboration of standards of energy efficiency has been a subject of great importance to foment the adequate use of the energy resources. For the residential sector the standard first draft exists: NOM-020-ENER-1998 energy efficiency in constructions: Standard for the covering of buildings for housing up to three floors. In this study the thermal analysis of the cover of one of the house models more used in the construction of houses of social interest in Mexico. By applying the methodology proposed by the first draft of the Standard the thermal gains by conduction in roof and walls, and by radiation in windows were determined. The analysis was performed for several cities of the country with different climates, the results were compared with the values proposed in the Standard, the viability of application of this Standard in the sector of the house of social interest was analyzed and finally the energy saving in ceasing using air conditioning systems for interiors. [Spanish] Ante la imperiosa necesidad de ahorrar y usar de forma eficiente la energia, la Secretaria de Energia (Sener) a traves de la Comision Nacional para el Ahorro de Energia, (CONAE) ha promovido el diseno y aplicacion de diferentes medidas y programas de eficiencia energetica. La elaboracion de normas de eficiencia energetica ha sido un rubro de gran importancia para fomentar el uso adecuado de los recursos energeticos. Para el sector residencial existe el anteproyecto de norma: NOM-020-ENER-1998 ficiencia energetica en edificaciones: Norma para la envolvente de los edificios para uso habitacional hasta de tres pisos. En este estudio se presenta el analisis termico de la

  18. La Función de la Auditoría Interna en las Cajas de Ahorros Españolas

    OpenAIRE

    Horacio Molina Sánchez; José A. Arcenegui Rodrigo

    2007-01-01

    Hoy día la función de auditoría interna es clave en el esquema de gobierno corporativo de las entidades financieras. Esta investigación tiene dos objetivos. En primer lugar, pretendemos describir el grado de cumplimiento de las recomendaciones del Comité de Basilea por parte de las cajas de ahorros españolas en un momento anterior a la regulación de aspectos sustanciales del gobierno de estas entidades (como por ejemplo, la figura del comité de auditoría) por parte de la Ley Financiera. En se...

  19. ¿SON LAS CAJAS DE AHORROS DE CASTILLA Y LEÓN SOCIALMENTE RESPONSABLES?. INFLUENCIA DE SU OBRA SOCIAL EN EL DESEMPEÑO EMPRESARIAL /

    OpenAIRE

    Marbella Sánchez, F.; Martínez Campillo, A.; Cabeza García, L.

    2008-01-01

    Los objetivos de este trabajo son realizar un estudio descriptivo de la evolución del gasto en obra social de las Cajas de Ahorros de Castilla y León durante el periodo 2000-2004, así como analizar el efecto de dicha inversión sobre el desempeño empresarial. Los resultados obtenidos muestran un crecimiento relativamente bajo de la dotación a obra social, siendo el área que más presupuesto recibe la de Cultura y Tiempo Libre, y una influencia positiva y significativa de la misma sobre la cuota...

  20. Las cajas municipales de ahorro y crédito: Su experiencia en el micro crédito rural en Perú

    OpenAIRE

    Felipe Portocarrero Maisch

    2000-01-01

    Las Cajas Municipales de Ahorro y Crédito (CMACs) son las principales proveedoras de micro créditos formales en Perú. En los años 90 sus préstamos a los hogares pobres aumentó substancialmente y fue financiado, de manera principal, por el éxito que ha tenido en la movilización de depósitos. Las CMACs han logrado total sustentabilidad a partir de un contexto macroeconómico favorable; la promoción de intermediación financiera a nivel local; un contexto institucional favorable y el apoyo de la c...

  1. El ahorro familiar en los países en desarrollo Desigualdad, factores demográficos y todo eso: ¿Qué tan distintos son América Latina y el Sureste de Asia?

    OpenAIRE

    Miguel Székely; Orazio P. Attanasio

    2000-01-01

    (Disponible en idioma inglés únicamente) El Este de Asia y América Latina han venido divergiendo en varios aspectos durante las últimas tres décadas. En este trabajo se comparan los hábitos de ahorro familiar en dos países de cada región (México, Perú, Tailandia y Taiwán). Hacemos cuatro aportes. En primer lugar, establecemos las primeras comparaciones en cuanto al ahorro entre estas dos regiones al nivel micro, empleando técnicas de cohorte sintética cohort. En segundo lugar, en vez de conce...

  2. Human bioclimate atlas for Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Morillon-Galvez, D. [Universidad Autonoma de Mexico, Coyoacan (Mexico). Inst. de Ingenieria; Saldana-Flores, R. [Gerencia de Energias no Convencionales, Inst. de Investigaciones Electricas, Temixco (Mexico); Tejeda-Martinez, A. [Universidad Veracruzana, Xalapa (Mexico). Centro de Ciencias de la Tierra

    2004-07-01

    This work presents bioclimatic charts for Mexico, as a result of an analysis of climate for the period 1951-1980. The basis to define the zone of thermal comfort was the equation proposed by Auliciems combined with the bioclimatic chart of Olgyay and the diagram of Givoni for bioclimatic control in buildings. Other tools used to carry out the diagnosis were the equations of Fanger. The results obtained were validated according to the parameters established by the American Society of Heating, Refrigerating and Air-Conditioning Engineering (ASHRAE), for the different climates of Mexico. The climatic data were those reported by 700 climatological stations throughout the country. The charts were developed using the ArcInfo program, in which the conditions of comfort, cool and warm were identified in order to achieve better thermal comfort in buildings and the profitable use of this renewable energy. (author)

  3. Bioclim Deliverable D4/5: global climatic characteristics, including vegetation and seasonal cycles over Europe, for snapshots over the next 200,000 years

    International Nuclear Information System (INIS)

    The aim of the BIOCLIM project is to develop and present techniques that can be used to develop self-consistent patterns of possible future climate changes over the next million years (climate scenarios), and to demonstrate how these climate scenarios can be used in assessments of the long-term safety of nuclear waste repository sites. Within the project, two strategies are implemented to predict climate change. The first is the hierarchical strategy, in which a hierarchy of climate models is used to investigate the evolution of climate over the period of interest. These models vary from very simple 2-D and threshold models, which simulate interactions between only a few aspects of the earth system, through general circulation models (GCMs) and vegetation models, which simulate in great detail the dynamics and physics of the atmosphere, ocean, and biosphere, to regional models, which focus in particular on the European region and the specific areas of interest. The second strategy is the integrated strategy, in which intermediate complexity climate models are developed, and used to consecutively simulate the development of the earth system over many millennia. Although these models are relatively simple compared to a GCM, they are more advanced than 2D models, and do include physical descriptions of the biosphere, cryo-sphere, atmosphere and ocean. This deliverable, D4/5, focuses on the hierarchical strategy, and in particular the GCM and vegetation model simulation of possible future climates. Deliverable D3 documented the first step in this strategy. The Louvain-la-Neuve 2-D climate model (LLN-2D) was used to estimate (among other variables) annual mean temperatures and ice volume in the Northern Hemisphere over the next 1 million years. It was driven by the calculated evolution of orbital parameters, and plausible scenarios of CO2 concentration. From the results, 3 future time periods within the next 200,000 years were identified as being extreme, that is either

  4. Electric power saving potential due to domestic refrigerators replacement; Potencial de ahorro de energia electrica por el reemplazo de refrigeradores domesticos

    Energy Technology Data Exchange (ETDEWEB)

    Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de Energia Electrica (Mexico)]. E-mail: jose.peralta@cfe.gob.mx

    2006-04-15

    In Mexico the second most used electrical appliance is: refrigerator. Owing to its use, it would be a promising option for electric power saving. In Guadalajara, Reynosa and Tampico it was performed a study with the aim of launching a project to replace the old refrigerators with new ones which are more effective and less expensive. Since the refrigerators cost and the electrical invoicing saving, the electric appliance change is profitable. To expect with this replacement more than eight million of refrigerators manufactured before 1997 will be changed. [Spanish] El refrigerador es el segundo electrodomestico mas utilizado a nivel nacional, esto permite que debido a su uso sea una opcion prometedora para el ahorro de energia electrica. Se hizo un estudio en Guadalajara, Reynosa y Tampico con el fin de lanzar un proyecto para sustituir los refrigeradores viejos por unos nuevos que sean mas eficaces y menos costosos. Por el costo de los refrigeradores y el ahorro en la facturacion electrica, el cambio de electrodomestico es rentable, de esta manera se espera que los mas de ocho millones de refrigeradores fabricados antes de 1997 que existen en el pais sean cambiados.

  5. Estimated potential of energy saving and reduction of the demand commercial buildings illumination; Potencial estimado de ahorro de energia y reduccion de la demanda en iluminacion de edificios comerciales

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Gomez, Victor Hugo; Morillon Galvez, David [Posgrado en Energetica de la DEPFI-UNAM, Mexico, D. F. (Mexico)

    1999-07-01

    In this paper the estimated energy saving potential in illumination, the energy end use and the technology used in commercial buildings of different use is analyzed. Estimation that departs from information of the Fideicomiso para el Ahorro de Energia (FIDE) demonstrative cases, presents the energy saving and the demand reduction in a sample of 29 buildings, among which are shopping malls, hospitals, schools, hotels, restaurants and public buildings in which energy saving programs have been carried out, with measures such as the cleaning of the luminaries and its replacement for more efficient ones. The average saving obtained is of 21.81%, in the following areas: illumination, air conditioning and others. In addition, in a sample of 4 buildings, it was observed that before applying the energy saving programs, two of them did not fulfill with the norm NOM-007-1995 (electric power density in interior lighting systems W/m{sup 2}) and later did fulfill the values and criteria of the norm. [Spanish] En el presente trabajo se analiza el potencial estimado de ahorro de energia en iluminacion, el uso final de la energia y la tecnologia empleada en edificios comerciales de uso distinto. Estimacion que parte de la informacion de los casos demostrativos del Fideicomiso para el Ahorro de Energia (FIDE), se presenta el ahorro y reduccion de la demanda en una muestra de 29 edificios, entre los que se tienen centros comerciales, hospitales, escuelas, hoteles, restaurantes y edificios publicos en los cuales se ha llevado a cabo programas de ahorro de energia, con medidas como la limpieza de las luminarias y su remplazo por otros mas eficientes. El ahorro promedio obtenido es de 21.81%, en las siguientes areas: iluminacion, aire acondicionado y otros. Ademas, en una muestra de 4 edificios, se observo que antes de aplicar los programas de ahorro de energia, dos no cumplian con la norma NOM-007-ENER-1995 (densidad de potencia electrica en alumbrado interior W/m{sup 2}) y

  6. Análisis del impacto económico y financiero de un programa de ahorro de agua en los dispositivos de descarga en sanitarios de una institución de educación básica

    OpenAIRE

    Carrillo Cubillas, Mario Miguel

    2006-01-01

    Uno de los temas centrales del IV Foro Mundial del Agua, realizado en la Ciudad de México en marzo de 2006 fueron el ahorro y cuidado del agua en el mundo. Para lograr dichos ahorros se requieren cambios radicales en los que el proceso de toma de decisiones se torna muy importante, debido a los costos que por lo regular implican dichos cambios. Esta Tesis pretende demostrar que los programas de ahorro y cuidado del agua no brindan solamente beneficios ambientales o sustenta...

  7. Analysis of passive systems as a tool for energy saving in buildings: solar control; Analisis de sistemas pasivos como herramienta para el ahorro de energia en edificaciones: Control solar

    Energy Technology Data Exchange (ETDEWEB)

    Saravia, Maricela; Morillon Galvez, David [Instituto de Ingenieria, UNAM, Mexico, D. F. (Mexico)

    1999-07-01

    A bioclimatic study of El Salvador is presented, with the purpose of using window eaves as elements of passive solar control and to determine the optimal angles of orientation, in order to diminish the thermal gains by direct solar radiation and to manage to get close to the comfort conditions. The former with the intention of integrating measures that help to obtain energy efficiency and comfortable buildings, for the conditions of warm humid climate, characteristic of a Central American country like El Salvador. Besides offering a document of consultation among the professionals dedicated to the design and as base of bioclimatic considerations that must have the construction regulations. As a conclusion the optimal angles of eaves for each orientation are presented and a quantitative estimation of the savings that would imply not to consume electrical energy in cooling systems using these elements as a protection to the direct solar radiation. [Spanish] Se presenta un estudio del bioclima de El Salvador, con el fin de utilizar aleros de ventana como elementos de control solar pasivo y determinar los angulos optimos por orientacion, para disminuir las ganancias termicas por radiacion solar directa y lograr acercar a las condiciones de confort. Lo anterior con el objeto de integrar medidas que coadyuven a lograr edificios energeticamente eficientes y confortables, para las condiciones de clima calido humedo, caracteristico de un pais centroamericano como El Salvador. Ademas de brindar un documento de consulta entre los profesionales dedicados al dise y como base de consideraciones bioclimaticas que debe tener el reglamento de construcciones. Como conclusion se presentan los angulos optimos de alero por cada orientacion y una estimacion cuantitativa del ahorro que implicaria el no consumir energia electrica en sistemas de enfriamiento utilizando estos elementos como una proteccion a la radiacion solar directa.

  8. Proyecto de inslaciones para el ahorro de energía y agua en una vivienda unifmailiar situada en Sant Gregori (Girona)

    OpenAIRE

    Rojo Gallardo, Carlos

    2009-01-01

    El presente proyecto presenta el diseño y cálculo de las instalaciones de una vivienda unifamiliar con el fin de lograr un ahorro de energía y de agua. Para hacerlo se han adoptado cinco medidas: - La primera es instalar un sistema de captación de energía solar térmica; se han analizado las necesidades energéticas de ACS y calefacción, y una vez realizado estos análisis se ha procedido a hacer el diseño de la instalación. - La segunda medida es instalar un sistema de energía so...

  9. Strategies for energy saving in buildings by means of automatic control; Estrategias de ahorro de energia en inmuebles mediante el control automatico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Trujillo, Oscar [Johnson Controls de Mexico S. A. de C. V., Mexico, D. F. (Mexico)

    1998-12-31

    In this paper some of the measures and strategies for energy saving that can be applied in different types of buildings, mainly in hotels and office buildings, are presented. The proposed actions are accomplished with the aid of the automatic control equipment and the operation and/or maintenance personnel that supervises and establishes the control parameters of each one of the strategies than are focused to the appropriate utilization of the electric energy. [Espanol] En este documento se presentan algunas de las medidas y estrategias de ahorro de energia que pueden ser aplicadas en diferentes tipos de inmuebles, principalmente en hoteles y en edificios de oficinas. Las acciones propuestas son realizadas con la ayuda del equipo de control automatico y del personal de operacion y/o mantenimiento quien supervisa y establece los parametros de control de cada una de las estrategias que son destinadas a la buena utilizacion de la energia electrica.

  10. Evaluation of the energy saving potential in illumination using presence sensors; Evaluacion del potencial de ahorro de energia en iluminacion utilizando sensores de presencia

    Energy Technology Data Exchange (ETDEWEB)

    Cortes Eslava, Alejandro [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

    1999-07-01

    The analysis and the evaluation of the energy saving that would provide a system of illumination controlled by sensors of presence in an enclosure with low transit, evaluating the economic profitability of the system is presented. The data, from which the analysis is sustained and the results are deducted, coming from the use and installation of a timer in the area. [Spanish] Se presenta el analisis y la evaluacion de los ahorros de energia que suministraria un sistema de iluminacion controlado por sensores de presencia en un recinto con bajo transito, evaluando la rentabilidad economica del sistema. Los datos, a partir de los cuales se sustenta el analisis y se deducen los resultados, provienen de la utilizacion e instalacion de un contador de tiempo de uso en el recinto.

  11. Energy saving in Bellota Mexico S.A. de C.V.; Ahorro de energia en Bellota Mexico S.A de C.V.

    Energy Technology Data Exchange (ETDEWEB)

    Salazar Lopez, Jose Albeiro [Bellota Mexico S.A. de C.V. (Mexico)

    2003-07-01

    The present article intends to make a general description of the different activities that were developed in Bellota Mexico S.A. de C.V. during year 2001 and which lead to obtaining the national prize of energy saving granted by the Comision Federal de Electricidad (CFE) and the Fideicomiso para el Ahorro de Energia Electrica (FIDE). In the executed actions stands out an entirely coordinated program that includes: lighting systems, motors, refrigeration systems, transformers, special projects (settling tanks), capacitors, compressed air pipeline, induction furnaces, machinery in general, maximum demand control, preventive maintenance, measuring systems, operational and organizational systems. In all these subjects a fast description is made of the performed actions and the obtained results. It is mentioned in addition the importance of making a power diagnosis and the use of historical data for the planning of the strategies to follow. Also reference is made of the use of appropriate technology that considers the use of high-energy efficiency equipment, such as motors, lamps, compressors, etc. Finally an evaluation is made of the obtained results where the improvement of the electrical parameters stands out such as: reduction of the power index in 35.06%, reduction of the maximum demand in 11.94%, increase of the power factor from 93.53% in 98.21%. The obtained results demonstrate that investing in energy saving it is a good business. [Spanish] El presente trabajo tiene por objeto hacer una descripcion general de las diferentes actividades que se desarrollaron en Bellota Mexico S.A. de C.V. durante el ano 2001 y que condujeron a la obtencion del premio nacional de ahorro de energia otorgado por la Comision Federal de Electricidad (CFE) y el Fideicomiso para el Ahorro de Energia Electrica (FIDE). En las acciones ejecutadas se destaca todo un programa coordinado que abarca: sistemas de iluminacion, motores, sistemas de refrigeracion, transformadores, proyectos

  12. Las cajas de ahorro en el sistema financiero español. Trayectoria histórica y realidad histórica actual.

    OpenAIRE

    Cals, Joan,

    2002-01-01

    La OCDE (1971) calificaba al sistema financiero español, a comienzos de los años setenta, como uno de los más rígidos y reglamentados de los países que integraban la organización. A su vez, la cajas de ahorros españolas figuraban entre las que de forma más restrictiva debían desarrollar sus actividades (Ros, 1967). Por ello, era lógico que a partir de 1973-74 y, especialmente, 1977, se iniciara un proceso de reforma y liberalización que operaría en diversos frentes y daría paso a la equiparac...

  13. Evaluation of saving measurements and energetic efficiency in air-conditioning systems; Evaluacion de medidas de ahorro y eficiencia energetica en sistemas de climatizacion

    Energy Technology Data Exchange (ETDEWEB)

    Perez Lombard, L [Asociacion de Investigacion y Cooperacion de Andalucia (Spain); Ortiz, J [Building Research Establishment (United Kingdom); Riviere, P [Armines-ecole des mines de Paris (France)

    2006-04-15

    Buildings require an adequate air conditioning to offer workers a labor environment where there is thermal comfort. A study was performed in three different European places which count on several climates. The conclusion was the following: in order to analyze the energy efficiency in edifications it is fundamental the simulation tools use with the purpose of calculating the consumption and evaluating the saving measurements. [Spanish] Los edificios requieren de una climatizacion adecuada para que los que ahi operan puedan hacerlo dentro de un ambiente laboral donde exista el confort termico. Se llevo a cabo un estudio en tres lugares de Europa poseedores de diferentes climas y se concluyo que para poder analizar la eficiencia energetica de climatizacion en las edificaciones es imprescindible el uso de herramientas de simulacion con el proposito de calcular el consumo y evaluar las medidas de ahorro.

  14. Valoración de la garantía de pensión en las cuentas de ahorro individual en colombia

    Directory of Open Access Journals (Sweden)

    José V. Restrepo

    2011-09-01

    Full Text Available El comportamiento del individuo como persona que aporta, y futuro beneficiario de una pensión, es determinante para cuantificar los efectos que su densidad de aportes tiene sobre el sistema de ahorro individual y la exigibilidad de las diferentes garantías. Por esta razón, en el presente trabajo se intenta buscar desde las finanzas personales una visión alterna a lo expuesto en diferentes estudios que sobre la materia se han realizado, no solo en Colombia sino a nivel internacional, y brindar una aproximación a la solución del problema de sostenibilidad en el retiro. Para calcular la magnitud de las garantías, se desarrolló un procedimiento que combina metodologías de modelos estocásticos con modelos de lógica difusa y con el cálculo actuarial. de esta forma, y soportado en resultados de otros estudios, se logró determinar el ahorro individual potencial alcanzable por cada individuo en función de su género y su cohorte salarial, y el posible déficit existente para conseguir una pensión mínima de retiro. los resultados encontrados indican que en las condiciones de baja densidad de aportes es muy difícil para las cohortes de bajo y medio ingreso asegurar una pensión mínima sin el agotamiento de las garantías existentes y la participación del gobierno.

  15. Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

  16. Experiences on energy saving in Comision Federal Electricidad (CFE) buildings; Experiencias de ahorro de energia en edificios de la Comision Federal de Electricidad (CFE)

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Velasco, Jorge E. [Comision Federal de Electricidad (CFE) (Mexico)

    2005-07-01

    This document describes the developed saving projects in buildings and generating power stations in 2004 by the Comision Federal de Electricidad (CFE). The projects considered are: buildings of the oficinas nacionales, Divisions of distribution office buildings, office buildings of production regions, construction deputy manager's office building, buildings of transmission and transformation, generating power stations, investments and savings of the projects in oficinas nacionales, divisions of distribution and construction subdivision buildings. From these projects the ones concluded in the 2004 were: Distribution Divisions, Gulf-Center Division, Center-West Distribution Division. The developing projects of 2005: oficinas nacionales, distribution divisions, Construction Subdivision, Generating Power Stations, Transmission Areas and office buildings. And finally, the projects concluded in the 2005 are the distribution divisions, the construction subdivision, the generating power stations, the office buildings, the minisplit units and their advantages with respect to the air conditioning window units. [Spanish] Este documento describe los proyectos de ahorro desarrollados en inmuebles y centrales generadoras en el ano 2004 por la Comision Federal de Electricidad (CFE), los proyectos tratados son: inmuebles de oficinas nacionales, inmuebles de divisiones de distribucion, inmuebles de regiones de produccion, inmuebles de la subdireccion de construccion, inmuebles de transmision y transformacion, centrales generadoras, inversiones y ahorros de los proyectos en inmuebles de oficinas nacionales y divisiones de distribucion y subdireccion de construccion. De dichos proyectos se tiene que los proyectos concluidos en el 2004 fueron: Divisiones de Distribucion, Division Golfo Centro, Division de Distribucion Centro Occidente. Los proyectos en desarrollo del 2005: oficinas nacionales, divisiones de distribucion, Subdireccion de Construccion, Centrales Generadoras, Areas

  17. Cenogramas, análisis bioclimático y muestreo en faunas de mamíferos: implicaciones para la aplicación de métodos de análisis paleoecológico

    Directory of Open Access Journals (Sweden)

    Hernández Fernández, M.

    2006-12-01

    Full Text Available In this work we analyzed the problems derived from the potential species loss associated to the taphonomic processes occurring in fossil sites. We seek to resolve the possible utility of cenograms and bioclimatic analysis as methodologies applicable in Paleoecology. Supposedly, if species are deleted in a community, significant changes in its structure might appear, which would make these paleoecological techniques dysfunctional. The analysis has been carried out with the data of two modern mammalian communities, Barrow (Alaska and Jaipur (India, on which we have deleted species randomly. Our results have allowed us to conclude that these methodologies are useful in Paleoecology, since they are functional with a satisfactory level of confidence, as long as the species loss is not excessively elevated (for communities with 20-40% of the original species.En este trabajo hemos analizado la problemática derivada de la posible pérdida de especies asociada a los procesos tafonómicos que se dan en los yacimientos de fósiles, para determinar la posible utilidad de los cenogramas y el análisis bioclimático como metodologías aplicables en Paleoecología. Podría suponerse que si eliminamos especies en una comunidad se podrían producir cambios significativos en su estructura que convertirían en no funcionales a estas metodologías. El análisis se ha llevado a cabo con los datos de dos comunidades de mamíferos actuales, Barrow (Alaska y Jaipur (India, de las que hemos eliminado progresivamente especies de forma aleatoria. Los resultados obtenidos nos han permitido concluir que tanto los cenogramas como el análisis bioclimático son útiles en Paleoecología, ya que son funcionales con un nivel de confianza adecuado, siempre y cuando la pérdida de especies no sea excesivamente elevada (en comunidades con un 20-40% de las especies originales.

  18. Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

    Energy Technology Data Exchange (ETDEWEB)

    Rincon Nader, Jorge A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1992-12-31

    The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

  19. The methodology for the evaluation of the energy saving by the daylight saving time in Mexico; Metodologia para la evaluacion del ahorro de energia debido al cambio de horario durante la epoca del verano

    Energy Technology Data Exchange (ETDEWEB)

    Ramos Niembro, Gaudencio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    A description is made of the methodology for the evaluation of energy saving by the daylight saving time in Mexico. A mathematical model was developed that would allow the quantitative evaluation of the energy saving by the daylight saving time, through measurements of the consumption of different users from the domestic commercial and industrial sector, considering the various variables that impact the consumption [Espanol] Se describe la metodologia para la evalucion del ahorro de energia por el cambio de horario de verano en Mexico. Se desarrollo un modelo matematico que permitiera evaluar cuantitativamente el ahorro de energia debido al cambio de horario durante la epoca de verano, atraves de mediciones de consumos de los diferentes usuarios de los sectores domestico, comercial e industrial, considerando las diversas variables que impactan en el consumo

  20. Análisis y evaluación de medidas de ahorro de energia eléctrica en una edificación del Campus de la UNAM

    OpenAIRE

    Marquínez Mauleón, Félix

    2011-01-01

    En este proyecto fin de carrera se muestra una idea general de cómo se consume le energía eléctrica en edificios del campus de la UNAM, así como sus indicadores energéticos principales y sus potenciales de ahorro de energía eléctrica tecnológicos y operativos.

  1. Análisis de costes y ahorros potenciales relacionados con la utilización de pruebas preoperatorias en los hospitales de Canarias

    Directory of Open Access Journals (Sweden)

    López-Bastida J.

    2003-01-01

    Full Text Available Objetivos: Estimar el ahorro potencial que podría tener lugar en el Servicio Canario de Salud (SCS, a partir de una utilización apropiada científica de las pruebas preoperatorias, haciendo uso de la información obtenida de los 5 hospitales universitarios de la red pública. Métodos: Un total de 55 anestesiólogos (60% del SCS cumplimentaron un cuestionario. En éste se prestó especial atención a las pruebas preoperatorias más frecuentemente utilizadas, como la radiografía de tórax, el electrocardiograma, las pruebas de laboratorio y la espirometría. Los costes unitarios medios para las diferentes pruebas preoperatorias se obtuvieron de 2 hospitales participantes en el estudio. Para calcular los ahorros potenciales derivados del uso apropiado de las pruebas preoperatorias se han considerado varios escenarios caracterizados por diferentes hipótesis o grados de cumplimiento de un protocolo basado en el conocimiento científico, considerado como parámetro de referencia. Resultados: En el caso ideal de que se cumpliera el protocolo científico recomendado en el 100% de los 16.179 pacientes considerados ASA I y II, la repercusión económica sería notable, pues supondría una liberación de recursos sensible que podría ser utilizada para otros programas de salud. Estas cifras podrían alcanzar aproximadamente los 1,02 millones de euros, sin considerar el coste de la estancia preoperatoria. Esta cifra podría incrementarse hasta, aproximadamente, los 2,13 millones de euros si incluimos un día de estancia preoperatoria, y hasta los 3,24 millones de euros incluyendo 2 días de estancia preoperatoria. Conclusiones: La revisión reciente de la literatura científica y los resultados proporcionados por el cuestionario aplicado en el SCS indican que las pruebas preoperatorias alcanzan los mayores beneficios para los pacientes y para la sociedad si se guían por el conocimiento científico. Es posible, además, liberar recursos a partir de una

  2. Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, G.; Heard, Ch.; Sanchez Viveros, A. [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

    1997-12-31

    Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

  3. Ahorro infantil: “Chispitas”-Estrategia para combatir la pobreza, Fundación Ayú, Oaxaca, México

    Directory of Open Access Journals (Sweden)

    Guadalupe Arcos-Medina*

    2016-02-01

    Full Text Available En esta investigación analizamos cómo la estrategia de combate a la pobreza de la Fundación Ayú, influye en el hábito del ahorro de los niños y niñas mixtecos de Oaxaca -los “Chispitas”-, con datos obtenidos de noviembre de 2013 a julio de 2014. Realizamos un taller participativo y entrevistas semiestructuradas, aplicando un cuestionario a 42 niños y niñas de diez años de edad promedio, y antigüedad como ahorradores de entre tres y siete años. El perfil socioeconómico familiar corresponde mayormente a hogares campesinos; las razones para ahorrar son la educación, el futuro y las emergencias, siendo las madres quienes mayor influencia tienen en este hábito. Participar en las cajas visibiliza a los niños y niñas en la localidad y los inicia en la inclusión social y financiera.

  4. The satisfaction of developing a project of electrical energy saving; La satisfaccion de desarrollar un proyecto de ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Arreola Suarez, Alejandro [Hotel Club Marival, Nuevo Vallarta, Nayarit (Mexico)

    2002-09-01

    The projects for the energy saving in hotels represent a great opportunity to reduce the operation costs in the demand and consumption of electrical energy, since the existing facilities can take advantage of new technologies in illumination, air conditioning, refrigeration and heating. By their constitution, the hotels work the year around uninterruptedly and must provide all type of services to the guests and working personnel, which originates that they consume great amounts of energy in air conditioning, lightning, laundry, etc., since the prestige of the installation depends on it. [Spanish] Los proyectos para el ahorro de energia en hoteles representan una gran oportunidad para reducir costos de operacion en la demanda y consumo de energia electrica, ya que las instalaciones existentes pueden aprovechar nuevas tecnologias en iluminacion, aire acondicionado, refrigeracion y calefaccion. Por su constitucion, los hoteles trabajan ininterrumpidamente todo el ano y deben proporcionar toda clase de servicios a los huespedes y personal que labora, lo cual origina que consuman grandes cantidades de energia en aire acondicionado, iluminacion, lavanderia, etc., pues de ello depende el prestigio de la instalacion.

  5. Energy saving: optimal use of air conditioning equipment by means of the solar control; Ahorro de energia: uso optimo de los acondicionadores de aire mediante el control solar

    Energy Technology Data Exchange (ETDEWEB)

    Mejia D, David; Morillon G, David; Rodriguez V, Luis [Universidad Nacional Autonoma de Mexico (Mexico)

    2001-09-01

    In this article the evaluation of the solar heat gains through the transparent parts of a building (houses of social interest) is presented; with the purpose of determining the heat gains through windows during summer time and under the following conditions: without solar protection, with the use of eaves, solar breakers and, finally, with the use of both elements. With the determined percentage of the diminution of heat gains, the considered potential of energy saving in air conditioning was obtained that would be available if the houses were constructed with solar control. [Spanish] En este articulo se presenta la evaluacion de las ganancias de calor solar a traves de las partes transparentes de un edificio (viviendas de interes social); con el objeto de determinar las ganancias de calor a traves de ventanas para la epoca de verano y bajo las siguientes condiciones: sin proteccion solar, con el empleo de aleros, con quiebrasoles y, finalmente, con el empleo de ambos elementos. Con el porcentaje determinado de la disminucion de ganancias de calor, se obtuvo el potencial estimado de ahorro de energia en aire acondicionado que se tendria si las viviendas se construyen con control solar.

  6. Composición quimicomineralógica de las materias primas y ahorro de energía en la industria del cemento

    Directory of Open Access Journals (Sweden)

    Soria Santamaría, Francisco

    1982-06-01

    Full Text Available In the field of energy saving, mainly thermic, in the cement industry, not only should we consider the possibilities in the technological process or the finished product, but also the influence of the chemical-mineral composition of the raw materials. The distinct parameters which fall into the reactivity of the crudes are analyzed, such as the size of the grain (fineness, chemical and mineral composition of the principal components. There follows an exposition of the importance of the minority components as smelting and mineralizers, finally emphasizing the interest and practical behaviour of some of them.

    En el campo del ahorro de energía, principalmente térmica, en la industria cementera, no sólo deben contemplarse las posibilidades en cuanto al proceso tecnológico o el producto acabado, sino también la influencia de la composición quimicomineralógica de las materias primas. Se analizan los distintos parámetros que inciden en la reactividad de los crudos, tales como tamaño de grano (finura, composición química y mineralogía de los componentes principales. A continuación se hace una exposición de la importancia de los componentes minoritarios como fundentes y mineralizadores, destacando finalmente el interés y comportamiento práctico de alguno de ellos.

  7. Actions and results of the management of energy saving of the CONDUMEX group; Acciones y resultados de la gerencia de ahorro de energia de grupo CONDUMEX

    Energy Technology Data Exchange (ETDEWEB)

    Sashida Key, Carlos; Jimenez Huerta, Arturo; Alavez Alcazar, Moises [Grupo Condumex, Industrias IEM, S.A. de C.V., Mexico, D.F. (Mexico)

    1999-07-01

    The purpose of this paper is to expose some practical cases that have been developed through the Energy Saving Management of GRUPO CONDUMEX, in different areas such as systems related to water, steam, electricity and compressed air. This experience has been compiled of diagnoses and actions that have been carried out in the companies inside and outside GRUPO CONDUMEX, and of systems with the purpose of making efficient the use of fuels and getting close to the energy indexes that are handled in other International companies of the same manufacture branch. [Spanish] Este trabajo tiene por objeto exponer algunos casos practicos que se han desarrollado a traves de la Gerencia de Ahorro de Energia de GRUPO CONDUMEX, en distintas areas tales como sistemas relacionados con agua, vapor, electricidad y aire comprimido. Esta experiencia ha sido recopilada de diagnosticos y acciones que se han llevado a cabo en las empresas dentro y fuera de GRUPO CONDUMEX, y de sistemas con la finalidad de eficientar el uso de los energeticos y acercarnos a los indices energeticos que se manejan en otras empresas internacionales del mismo ramo de fabricacion.

  8. Energy saving using solar filters with iron base in windows; Ahorro de energia usando filtros solares con base en hierro en ventanas

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Galan, Jesus

    2003-07-01

    termico generado al interior de las edificaciones por las inadecuadas propiedades de los materiales de construccion, se desarrollaron en este trabajo filtros solares con base en hierro por medio de los cuales se logra un control selectivo de la radiacion solar que se transmite a traves de las ventanas. Estos filtros solares consisten en peliculas delgadas de FeO depositadas sobre sustratos de vidrio cal-sosa (el mas usado en nuestro pais para las edificaciones) de 600x300x3 mm, por medio de la tecnica de sputtering asistida con radiofrecuencia y magnetrones planos, partiendo de un blanco de hierro puro de 127x254 mm y usando un plasma de argon. Para obtener el grado de oxidacion deseado en el hierro, pequenas muestras (45 x 22 mm) fueron sometidas a un proceso de calentamiento en una atmosfera reductora constituida de 50% H{sub 2} + 50% N{sub 2}, durante un periodo de tiempo de 10 minutos a una temperatura de 400 C. Los filtros solares con base en FeO presentan una transmisividad de 30.2% para el intervalo visible del espectro electromagnetico (radiacion con longitud de onda de 380-780 nm), y de 39.9% para el infrarrojo cercano (radiacion con longitud de onda de 780-2500 nm); mientras que su reflectividad es de 17.5 y 19%, para los intervalos visibles e infrarrojo cercano del espectro electromagnetico respectivamente. Se realizo una simulacion, a traves del software Energy 10, del comportamiento energetico de una casa-habitacion cuando utilizan en las ventanas vidrios simples (una lamina) tipo cal-sosa, asi como tambien cuando esta misma edificacion usa en las ventanas los filtros solares con base en FeO desarrollados. Ambos casos se comparan obteniendose asi los posibles ahorros de energia por el uso de dichos filtros solares en las ventanas. Las simulaciones fueron llevadas a cabo para diferentes localidades del pais, obteniendose que los filtros solares con base en FeO desarrollados, permiten ahorros de energia principalmente por concepto de acondicionamiento de aire

  9. The technical-economic potential of thermal energy saving in hospitals; El potencial tecnico-economico de ahorro de energia termica en hospitales

    Energy Technology Data Exchange (ETDEWEB)

    Herrera, A. [Universidad Nacional Autonoma de Mexico (Mexico); Islas, J [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Arriola, A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    cantidad representa un porcentaje importante de los gastos totales del hospital (29.367 millones de dolares) es importante determinar posibilidades tecnico - economicas de ahorro de energia termica del hospital. El HGZ N 1 - IMSS Ags. Esta ubicado en un conjunto mas amplio en donde se localizan las unidades del IMSS, tales como, la lavanderia regional, la unidad deportiva, el centro de seguridad social, la unidad de medicina familiar N 1 y el hospital. Sin embargo a partir de las instalaciones electricas y de suministro de vapor y agua caliente del hospital se distribuyen los fluidos electricos y termicos de todo este conjunto. Debido a esta situacion, en este trabajo nos referiremos al consumo global del conjunto del IMSS de Aguascalientes en donde el hospital es el principal consumidor de energia termica. En el presente trabajo calcularemos el potencial tecnico - economico de ahorro de energia termica del conjunto del IMSS a traves de la tecnica termodinamica de punto de pliegue o tecnica pinch.

  10. Conclusiones de las Ponencias y Debates del Coloquio Internacional sobre Ahorro de Energía celebrado en Budapest, organizado por la Sección Húngara de la Europrefab

    Directory of Open Access Journals (Sweden)

    Aguirre de Iraola, Fernando

    1980-03-01

    Full Text Available Durante los días 10 y 11 de abril, el doctor Arquitecto F. Aguirre, director del ITEcc, estvuo en Budapest para presidir el Coloquio Internacional sobre «Ahorro de energía en la edificación», que había sido organizado por la sociedad europea para la promoción de la industrialización de la construcción, (EUROPREFAB, de la cual el profesor Aguirre es presidente.

  11. The use of reflecting paints on building`s roofs for energy saving; Uso de pinturas reflejantes en los techos de las edificaciones para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Valera Negrete, Jose Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad, Mexico, D. F. (Mexico); Sanchez Soto, Ramon [Facultad de Ingenieria, Departamento de Termoenergia de la UNAM, Mexico, D. F. (Mexico)

    1998-12-31

    This paper shows the effects of the use of reflecting paints in different colors on the buildings roofs and the results in energy saving obtained in a field test carried on in Monterrey, Nuevo Leon State of Mexico using aluminum paint. [Espanol] El presente trabajo muestra los efectos del uso de pinturas reflejantes de diferentes colores en los techos de edificaciones, y los resultados de ahorro de energia electrica obtenidos en una prueba de campo efectuada en Monterrey, Nuevo Leon, Mexico, utilizando pintura de aluminio.

  12. Método integral para mejorar el diseño de columnas de destilación, a partir de conceptos de ahorro de energía

    OpenAIRE

    Marco Antonio Ponce Guerrero; Daniel Salazar Sotelo

    2001-01-01

    Se presenta una metodología para analizar esquemas de destilación y proponer modificaciones que signifiquen ahorros de energía, mediante el uso de curvas de entalpía-temperatura que relacionan la operación simulada con el caso de una operación ideal reversible, tal como lo proponen Dhole y Linhoff. Se hace una aplicación a una columna de destilación atmosférica de crudo, que presenta un arreglo complejo con pumparounds y extracciones laterales. El resultado de adicionar un pumparo...

  13. Propuesta de un sistema de aprovechamiento de agua lluvia como alternativa para el ahorro de agua potable, en la institución educativa María Auxiliadora de Caldas, Antioquia

    OpenAIRE

    Palacio Castañeda Natalia

    2011-01-01

    El aprovechamiento del agua lluvia es una práctica interesante, tanto ambiental como económicamente, si se tiene en cuenta la gran demanda del recurso sobre las cuencas hidrográficas, el alto grado de contaminación de las fuentes superficiales y los elevados costos por el consumo de agua potable en una institución educativa. Este proyecto presenta la ingeniería conceptual de una propuesta de diseño de un si stema de aprovechamiento de agua lluvia como alternativa para el ahorro de ...

  14. Evaluation of energy saving in pilot projects of window type air conditioning equipment in the domestic sector; Evaluacion del ahorro de energia en proyectos pilotos en equipos de aire acondicionado tipo ventana en el sector domestico

    Energy Technology Data Exchange (ETDEWEB)

    Duran Ramirez, Ricardo [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

    2001-07-01

    The present work shows the energy saving when replacing low efficiency window type air conditioning equipment, for higher efficiency equipment, as well as the necessary parameters to identify the results obtained by the pilot projects of substitution of conventional equipment for other more efficient in the domestic sector. [Spanish] El presente trabajo muestra los ahorros de energia al sustituir equipos de aire acondicionado tipo ventana de baja eficiencia, por equipos de mayor eficiencia, asi como los parametros necesarios para identificar los resultados obtenidos, por los proyectos pilotos de sustitucion de equipos convencionales por otros mas eficientes en el sector domestico.

  15. Análisis de la eficiencia en las cooperativas de ahorro y crédito en Colombia, mediante la utilización de la técnica de Análisis de Datos Envolvente DEA, periodo 2008-2011

    OpenAIRE

    Moreno Sierra, Vivian Carolina; Rey Huertas, Luis Eduardo

    2015-01-01

    La presente estudio pretende analizar la eficiencia en las cooperativas de ahorro y crédito en Colombia, mediante la utilización de la técnica de análisis de datos envolvente (DEA); el trabajo investigativo es importante analizar al subsector cooperativo de ahorro y crédito para el periodo 2008-2011 debido a que este subsector es el más dinámico del sector cooperativo. La identificación de las cooperativas eficientes requiere de la aplicación de una técnica no paramétrica mediante el análisis...

  16. La Función de la Auditoría Interna en las Cajas de Ahorros Españolas

    Directory of Open Access Journals (Sweden)

    Horacio Molina Sánchez

    2007-06-01

    Full Text Available Hoy día la función de auditoría interna es clave en el esquema de gobierno corporativo de las entidades financieras. Esta investigación tiene dos objetivos. En primer lugar, pretendemos describir el grado de cumplimiento de las recomendaciones del Comité de Basilea por parte de las cajas de ahorros españolas en un momento anterior a la regulación de aspectos sustanciales del gobierno de estas entidades (como por ejemplo, la figura del comité de auditoría por parte de la Ley Financiera. En segundo lugar, identificamos las diferencias existentes entre las entidades atendiendo a su dimensión. El método empleado ha sido una encuesta a las entidades, obteniéndose respuesta de 42 de las 47 entidades. Los resultados obtenidos presentan la situación de los departamentos de auditoría interna y confirman que, en un número significativo de aspectos, la dimensión de las entidades influye en el grado de implantación de los estándares emitidos por el Comité de Basilea.Nowadays, the internal audit function is critical in the corporate governance framework of financial institutions. Our research’s objective has to objectives. First, we try to describe the implementation level of Basle Committee’s recommendations in the Spanish saving banks before an important regulation over corporate governance has been issued in Spain (for instance, the figure of audit committee through the Financial Law. Second, we assess the differences between entities considering their dimmension. We have carried out a survey to saving banks, obtaining a response from 42 out of 47 entities. Our results show the situation of internal audit departments and confirm that, in a significative number of cases, entities’ dimmension affects the level of implementation of the Basel Committee’s standards.

  17. Los Sistemas de Transferencia Interna de Fondos: Su Aplicación en las Cajas de Ahorros y en las Cajas Rurales españolas

    Directory of Open Access Journals (Sweden)

    Pilar Ibarrondo Dávila

    2004-12-01

    Full Text Available El entorno competitivo de las entidades de depósito ha sufrido fuertes cambios durante las dos últimas décadas, y en la actualidad se caracteriza por una fuerte rivalidad entre las empresas del sector. En este contexto, las entidades bancarias deben dotarse de sistemas de información ágiles y flexibles que les permitan dar respuesta a las nuevas necesidades gerenciales y a las actuales exigencias de la dirección estratégica. Desde esta perspectiva, en el presente trabajo se estudian las características de los distintos sistemas de transferencia interna de fondos aplicables en las entidades bancarias, procediendo a un análisis comparativo de los mismos, y, posteriormente, se presentan los principales rasgos que caracterizan a los sistemas de transferencia de fondos correspondientes a las cajas de ahorros y a las cajas rurales, a partir de los resultados obtenidos de una encuesta realizada en dichas entidades. The competitive environment of monetary financial institutions has undergone great changes over the last two decades, and at present is characterized by strong competition among the companies of the sector. In this context, the monetory financial institutions should be endowed with agile and flexible information systems that allow them to respond to the new managerial necessities and the current demands of Strategic Management. Thus, in this paper, first we analyse the characteristics of the different funds-tranfer- pricing methods applicable in the banks and go on to carry out a comparative analysis of the former. Secondly, we present the main features that characterize the funds-transfer-pricing methods in Spanish Savings Banks and Spanish Rural Banks, based on the results obtained from a survey carried out among these companies.

  18. Energy saving in hotels by means of heat pumps application; Ahorro de energia en hoteles mediante la aplicacion de bombas de calor

    Energy Technology Data Exchange (ETDEWEB)

    Romero Paredes R, Hernando; Ambriz G, Juan Jose [Universidad Autonoma Metropolitana, Unidad Iztapalapa (Mexico)

    2005-07-15

    The thermal energy is presented as an alternate saving technology for utilities by means of the acute implementation of heat pumps. The objective is to demonstrate the technical and economical feasibility of the application of commercial heat pumps to installations where the handling of opposite temperatures for the conditioning of a space and/or of a fluid is required. In this article it is described the functioning of a heat pump, its different operation principles or types as well as the large diversity of applications they can have in industry, utilities and residential buildings. As an application example the substitution of an electric boiler by a heat pump is presented in a hotel installation and its differences in performance regarding the environmental conditioning of a nearby area and the heating of swimming pool water are analyzed. [Spanish] Se presenta la energia termica como una tecnologia de ahorro alterna para empresas de servicios valiendose de la implementacion agudizada de bombas de calor. El objetivo es demostrar la factibilidad tecnica y economica de la aplicacion de bombas de calor comerciales a instalaciones donde se requiere la manipulacion de temperaturas opuestas para el acondicionamiento de un espacio y/o un fluido. Se describe el funcionamiento de una bomba de calor, sus diferentes principios de operacion o tipos, asi como la gran diversidad de aplicaciones que pueden tener en la industria, empresas de servicios y edificios residenciales. Como ejemplo de aplicacion se presenta la sustitucion de una caldera electrica por una bomba de calor en una instalacion hotelera y sus diferencias de rendimiento en el calentamiento de agua de alberca y el acondicionamiento ambiental de un area cercana.

  19. Energy saving avoiding the centrifugal motor-compressors air vents discharge to the surrounding atmosphere; Ahorro de energia evitando venteo de aire a la atmosfera en motocompresores centrifugos

    Energy Technology Data Exchange (ETDEWEB)

    Serrano, Alex [Compressor Controls Corporation, Houston, TX (United States)

    1996-12-31

    The motor-compressors are a key part of the industrial processes. The reliability and efficient operation of a compressor is critical. The surge phenomenon is a threat in the reliability of a compressor and therefore for the process. Surge, in a centrifugal compressor is defined as a dramatic flow and pressure drop, including back-flow. This is always a significant process disturbance. Continuous surge results into costly process shutdowns and mechanical damages. To prevent surge, and control the discharge pressure with simple or obsolete controls it is needed to vent air to the surrounding atmosphere. This form of control is very inefficient and costly. An advanced control with leading technology, besides providing an economical value preventing surge damages, offers substantial energy saving reducing or eliminating the venting of air to the atmosphere. [Espanol] Los motocompresores son un aparte clave de los procesos industriales. La confiable y eficiente operacion de un compresor es critica. El fenomeno de surge es una amenaza a la confiabilidad de un compresor y por lo tanto del proceso. El surge en un compresor centrifugo es definido como una dramatica caida de flujo y presion, incluyendo flujo inverso. Esto es siempre un significante disturbio del proceso. El surge continuo resulta en costosos paros de proceso y danos mecanicos. Para prevenir el surge y controlar la presion de descarga con controles simples u obsoletos, es necesario ventear aire a la atmosfera. Esta forma de control es muy ineficiente y costosa. Un control avanzado con tecnologia de punta ademas de proveer valor economico previniendo danos por surge, provee sustanciales ahorros de energia reduciendo o eliminando el venteo de aire a la atmosfera.

  20. Energy saving program in an operating potable water and sanitation organism; Programa de ahorro de energia en un organismo operador de agua potable y saneamiento

    Energy Technology Data Exchange (ETDEWEB)

    Flores Cruz, Juan Jose [Fideicomiso para el Ahorro de la Energia Electrica, (Mexico)

    2001-03-01

    For the achievement of the objectives it was decided to use, among others, the following strategies: Personnel training, increase of the efficiency of the electromechanical equipment, study of Comision Federal de Electricidad (CFE) tariffs, correction of low power factors, increase of load factors, operation automate, regulation of the operation times, preventive maintenance of the equipment, establishment of technical standards, rational and efficient use of air conditioning equipment and illumination. So that these actions were applied in an easy and opportune form, it was established that within the structure of the General Coordination of Foreign Municipalities, the Program of Energy Saving depended directly of the Technical Management of CFE. In this way, the recommendations are first put under consideration of high-level officers, and then are lowered to the operative departments. [Spanish] Para el logro de los objetivos se acordo utilizar, entre otras, las siguientes estrategias: capacitacion del personal; aumentar la eficiencia de los equipos electromecanicos; estudio de tarifas de la Comision Federal de Electricidad (CFE); correccion de bajos factores de potencia; aumento de los factores de carga; automatizar la operacion; regular de los tiempos de operacion; mantenimiento preventivo a los equipos; establecimiento de normas tecnicas; uso racional y eficiente de aire acondicionado e iluminacion. Para que estas acciones se aplicaran en forma agil y oportuna, se establecio que dentro de la estructura de la Coordinacion General de Municipios Foraneos, el Programa de Ahorro de Energia dependiera directamente de la Gerencia Tecnica de la CRE. De esta forma, las recomendaciones primero se someten a consideracion de los funcionarios de alto nivel, y luego bajan a los departamentos operativos.

  1. Urban planning with criteria of energy saving: proposals and difficulties; Planeamiento urbanistico con criterios de ahorro energetico: propuestas y dificultades

    Energy Technology Data Exchange (ETDEWEB)

    Serrano, M.

    2008-07-01

    This article presents two examples of town planning with sustainable and solar contribution criterion. It analyses that the town planning have a lot of possibilities to make easy the design and the construction of more efficient building and with passive and active solar contribution, when we integrate de bio climatic measures in the beginning of the process, and that is very difficulty to construct bio climatic buildings the town planning are presented. (Author)

  2. Electric power saving in the drinkable water, sewage and sanitation system, La Piedad; Ahorro de energia electrica en el sistema de agua potable, alcantarillado y saneamiento de La Piedad

    Energy Technology Data Exchange (ETDEWEB)

    Sistema de Agua Potable, Alcantarillado y Saneamiento de la Piedad (Mexico). E-mail: sapaslapiedad@prodigy.net.mx

    2006-04-15

    In Michoacan, Mexico, a project who seeks to benefice the Municipal public resources was crated in 1994. It would be achieved trough the electric power saving in the public lighting system, and drinkable water pumping and black water, since those activities required the budget biggest part. The program could be developed recently and the saving was significant. In addition the electromechanical efficiency increased in the equipment installation. This work is an example for other States to do something similar that can improve their conditions. [Spanish] En el estado de Michoacan, Mexico se creo un proyecto en el ano de 1994, el cual buscaba beneficiar los recursos publicos municipales, a traves del ahorro de la energia electrica en los sistemas de alumbrado publico y bombeo de agua potable y aguas negras, ya que estas actividades son las que requieren la mayor parte del presupuesto. El programa pudo llevarse a cabo en anos recientes y el ahorro fue significativo, ademas de que aumento la eficiencia electromecanica en los equipos que se instalaron, y esta obra ha servido de ejemplo a otros estados para que realicen algo similar que pueda mejorar su situacion.

  3. La financiación de las oligarquías provinciales en el apogeo y crisis del negocio inmobiliario en España: una reflexión sociológica sobre las cajas de ahorros

    Directory of Open Access Journals (Sweden)

    José Manuel Rodríguez Acevedo

    2011-10-01

    Full Text Available El hundimiento, en el contexto de la crisis internacional del capitalismo, del modelo económico basado en el “ladrillo” y la especulación urbanística −además de en el turismo− ha puesto sobre la mesa el problema de las cajas de ahorros. En este artículo se repasa el papel destacado que estas peculiares entidades financieras han venido jugado en la financiación del boom inmobiliario de las últimas décadas en España. Creemos que no se puede llegar al fondo del asunto sin comprender la naturaleza histórica de unas fragmentadas oligarquías económicas y políticas de ámbito provincial y local, lideradas por promotores y grandes propietarios del suelo rústico y urbano, que han encontrado en las cajas de ahorros una privilegiada forma de financiación para los turbios y particulares negocios en los que se ha basado el tan alabado milagro económico español.

  4. Comportamento bioclimático de frangos de corte caipira em piquetes enriquecidos Bioclimatic behavior of free-range rustic broilers in enriched paddocks

    Directory of Open Access Journals (Sweden)

    Marcos J. B. dos Santos

    2010-05-01

    Full Text Available Conduziu-se esta pesquisa com o objetivo de avaliar o efeito do enriquecimento ambiental em sistema de produção para frangos de corte caipira, determinando a influência dos elementos meteorológicos e seu reflexo nos aspectos comportamentais das aves. O experimento foi realizado em 87 dias, na Estação Experimental de Pequenos Animais da Universidade Federal Rural de Pernambuco, desenvolvido em quatro módulos de produção e cada módulo dividido em quatro boxes com 10 aves por box, totalizando 160 aves, submetidas aos módulos de produção com acesso a piquete, acesso a piquete com poleiro, acesso a piquete com sombreamento artificial e acesso a piquete com poleiro e sombreamento artificial. O delineamento experimental foi inteiramente casualizado em parcelas subdivididas e médias comparadas pelo teste Tukey. O módulo de produção com acesso a piquete com poleiro e sombreamento artificial foi aquele que permitiu melhor condicionamento térmico às aves, apresentando valor médio para entalpia de 75,95 kJ kg-1, além de promover melhor oportunidade de expressar seus comportamentos naturais e de explorar o ambiente externo ao módulo de produção, potencializando o bem-estar animal.This study was conducted to evaluate the effect of an enriched environment on the production system of free range rustic broilers, determining the influence of meteorological elements and behavioral responses of the broilers. The experiment was performed during a production cycle of 87 days at the Experimental Station of Small Animals of the Federal Rural University of Pernambuco, conducted in four production modules divided into four boxes with 10 birds per box, totaling 160 birds, subjected to four modules of production: access to paddock, access to paddock with perch, access to paddock with artificial shade, and access to paddock with perch and artificial shade. The experimental design was completely randomized (CRD, in split plots, with the means compared

  5. Cuestiones actuales del régimen jurídico-administrativo de las Cajas de ahorros españolas

    Directory of Open Access Journals (Sweden)

    Ana Belén Casares Marcos

    2005-12-01

    Full Text Available Las reformas legislativas que han afectado en los últimos tiempos a la organización y el funcionamiento del sistema financiero español han tenido una especial repercusión en el ámbito de las cajas de ahorros. La tramitación parlamentaria de la Ley 44/2002, de 22 de noviembre, de Medidas de Reforma del Sistema Fianciero, reavivó el debate sobre su régimen jurídico y la necesidad de acotar la intervención pública en su seno. Ahonda en ello la Ley 26/2003 , de 17 de julio, de Transparencia, que extiende al ámbito de las cajas la preocupación por el corporate governance. Ambas normas responden a la necesidad de dar respuesta a algunos de los problemas más inmediatos a que se enfrentan estas entidades, si bien adolecen de un defecto fundamental por cuanto no abordan de forma exhaustiva la regulación de la institución. Se perpetúa así la trayectoria tradicional de "parcheo" del régimen jurídico aplicable a las mismas, evitando entrar en la cuestión esencial de la definición de su naturaleza jurídica y abocando a las cajas, en consecuencia, al díficil reto de acompasar su vocación social tradicional a las nuevas exigencias legales en pro de una mayor eficiencia, racionalidad y neutralidad de su acitividad económica.Recent legal changes pertaining to the organization and performance of the Spanish financial system have had significant repercussions on the savings banks sector. The law on financial market reform passed in 2002, Ley Financiera, raised once again the debate on their legal situation and the urge to cut down public influence on their management. The 2003 Transparency Law, Ley de Transparencia, follows this reform and extends corporate governance to Spanish savings banks. Both Laws seek to confront some of the most important issues raised by these credit institutions, but they also share the flaw of not regulating its legal framework and status completely. They continue, therefore, to add "patches" to the savings

  6. Catalysis as a tool for energy conservation in the refinery industry; Catalisis como herramienta de ahorro de energia en la industria de la refinacion

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, S.; Moran-Pineda, M. [Instituto Mexicano del Petroleo, Mexico, D. F. (Mexico); Bazan, G.; Gonzalez, L.; Barrios, H. [Pemex-Refinacion, Mexico, D. F. (Mexico)

    1996-12-31

    The catalysis, defined by the alchemists since its appearance, as that something or Philosophical Stone, with a special power to transform matter by means of the energy, has always represented a challenge to mankind, even more now, when most of the goods needed for its survival are related to a chemical process and nowadays, when they can not be imagined without the presence of a catalyzer. In the reciprocity between the chemical change and the catalyzer, the energy utilized represents the critical point. Once stated the above, it becomes interesting the study of the impact and the consequence of the binomial catalysis-energy in relation to the fuel recovery processes and the emission control processes, originated by its combustion, where the main objective is in establishing an analysis criterion for energy conservation with different trends; the first one, on the impact of the application of optimum catalytic systems in the fuel recovery processes and the second one on the optimum catalytic processes for emissions control. [Espanol] La catalisis desde su aparicion definida por los alquimistas como ese algo o piedra filosofal, con una fuerza especial para la transformacion de la materia mediante la energia, siempre ha representado un reto para el hombre, mas aun en la actualidad donde la mayoria de los bienes necesarios para su supervivencia estan relacionados con un proceso quimico y que hoy en dia no se conciben estos sin la presencia de un catalizador. En la reciprocidad entre el cambio quimico y el catalizador, la energia utilizada representa el punto critico. Dado lo anterior, resulta interesante el estudio del impacto y trascendencia del binomio catalisis-energia en relacion con los procesos para la obtencion de los combustibles y de los procesos para el control de emisiones, producto de la combustion de los mismos, donde el objetivo primordial esta en establecer un criterio de analisis de ahorro de energia con diferentes directrices; la primera, el impacto

  7. Importance of the harmonics in the lighting systems for the electric energy saving; Importancia de las armonicas en el sistema de iluminacion para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Garibay Mendoza, V. [Lumisistemas, departamento de aseguramineto de calidad, Naucalpan (Mexico); Hernandez Bernal, J. M. [UNICORP, Mexico, D. F. (Mexico)

    1995-12-31

    In a lighting system the discharge lamps (fluorescent and high intensity discharge (HID)), ballast and controls are generating elements of harmonics. As a consequence of the tendency of saving energy, the use of electronic ballasts and controls that integrate dimmers, daylight and present sensors has increased in order to optimize the energy use. This paper presents the harmonics generation resulting from the fluorescent lamps operating different electronic ballasts as well as their electronic controls. Likewise, are also shown the effects caused by generation of harmonics components by the lighting system in the electric system that go from the voltage and current distortion, the presence of currents in the neutral conductor in balanced systems to the repercussions in the metering equipment such as watthour meters and the effects the lighting equipment suffer due to the presence of harmonics, such as the power factor decrease in ballasts that are of high power factor and the temperature increment in the magnetic type ballasts. [Espanol] Dentro de un sistema de iluminacion, las lamparas de descarga (fluorescentes y alta intensidad de descarga {sup H}ID{sup )}, balastros y los controles son elementos generadores de armonicas. A consecuencia de la tendencia al ahorro de energia se ha incrementado el uso de balastros electronicos y controles que integran atenuadores de luz (dimmers), sensores de luz natural y de presencia con el fin de optimizar el uso de la energia. Este trabajo presenta los resultados de generacion de armonicas para lamparas fluorescentes, operando diferentes balastros electronicos asi como con controles electronicos. Asi mismo son presentados los efectos causados por la generacion de componentes armonicas por el sistema de iluminacion dentro del sistema electrico que van desde la distorsion en voltaje y corriente, la presencia de corrientes dentro del conductor neutro en sistemas balanceados, asi como la repercusion en los equipos de medicion tales

  8. Electric energy saving using natural illumination, in educational spaces; Ahorro de energia electrica utilizando iluminacion natural, en espacios educativos

    Energy Technology Data Exchange (ETDEWEB)

    Alpuche, Maria G; Marincic, Irene; Ochoa, Jose M [Programa de Arquitectura, Universidad de Sonora (Mexico)

    2008-07-15

    In this article the natural illumination in a space pertaining to the building of Architecture of the University of Sonora, in the city of Hermosillo is analyzed, Located towards the Northeast facade. This same space is repeated in the South facade, and paradoxically the space has the same dimensions and the same luminance design. Also the simulation of natural illumination by means of the Ecotec program is realized, and the levels of natural illumination in educational spaces, corresponding to the facilities of the University of Sonora are analyzed, where most of the year there is a completely clear sky. [Spanish] En este articulo se analiza la iluminacion natural en un espacio correspondiente al edificio de Arquitectura de la Universidad de sonora, en la ciudad de Hermosillo, Ubicado hacia la fachada Noreste. Este mismo espacio se repite en la fachada Sur, y el espacio tienen las mismas dimensiones y paradojicamente, el mismo diseno luminico. Tambien se realiza la simulacion de iluminacion natural mediante el programa Ecotec, y se analizan los niveles de iluminacion natural en espacios educativos, correspondientes a las instalaciones de la Universidad de Sonora, donde la mayor parte del ano se cuenta con un cielo completamente despejado.

  9. Technical and economical assessment of the options for energy saving in the library of the Universidad Autonoma Metropolitana-Azcapotzalco; Evaluacion tecnico economica de opciones para el ahorro de energia en la biblioteca de la Universidad Autonoma Metropolitana-Azcapotzalco

    Energy Technology Data Exchange (ETDEWEB)

    Bratu, N.; Campero, E.; Dorantes, R.; Fuentes, V.; Figueroa, A.; Garcia, R.; Zekkour, A. [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

    1993-12-31

    This paper presents a diagnosis of the electrical energy consumption in the library of the Azcapotzalco Unit of the Universidad Autonoma Metropolitana, to determine the actions that can be implemented for energy conservation. This without disturbing the lighting and thermal comfort. The analysis showed that, by changing the reflecting surfaces of the lighting lamps, the number of units can be reduced, without lowering the illumination level below the recommended values. The saving was estimated for replacement of the fluorescent lamps for others of metallic halogenides in the areas where the ceiling is high; for the installation of switches to improve the selectivity in turning on and turning off the lamps, achieving this way a better usage of the natural light; for the reduction of the electric load of the air conditioning units which will be obtained in incorporating induced draft shafts; and for an improvement in the electric and ballast installation. For the actions that turned out to be redeemable in three years the assistance of the Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) of the Comision Federal de Electricidad (CFE) has been available. It is expected that the execution of the modifications will be carried out in the November and December months of 1993, and the results will be evaluated in 1994. [Espanol] En este trabajo se presenta un diagnostico del consumo de energia electrica en la biblioteca de la Unidad Azcapotzalco de la Universidad Autonoma Metropolitana para determinar las acciones que se pueden llevar a cabo para ahorrar energia electrica. Esto sin deteriorar el confort luminico y termico. El analisis mostro que, cambiando las superficies reflectoras de las luminarias, se puede reducir el numero de lamparas, sin que el nivel de iluminacion quede debajo de los valores recomendados. Se estimaron ahorros: por la sustitucion de las lamparas fluorescentes por otras de halogenuros metalicos en las partes donde el

  10. Las Cajas de Ahorros en España durante el Régimen de Franco y la Transición Democrática : Su importancia en la economía regional

    Directory of Open Access Journals (Sweden)

    Luis Javier Coronas Vida

    2010-06-01

    Full Text Available En este artículo analizaremos las conexiones entre el desarrollo regional y la evolución de las cajas de ahorros, a partir del PIB regional per cápita y los depósitos en las cajas de ahorros, agrupados por regiones. El PIB real per cápita creció rápidamente en todas las regiones desde 1959 (el segundo franquismo. Aunque el crecimiento de las regiones pobres fue más fuerte que el de las ricas, en 1980 el PIB per cápita de las pobres no alcanzaba el 59% del correspondiente a las ricas (pero en 1945 era sólo el 43%. Los depósitos per cápita en las cajas de ahorros de las regiones pobres eran extremadamente reducidos en 1945 (sólo el 8% del dato correspondiente a las ricas; sin embargo en 1980 había alcanzado el 40%. El crecimiento de los depósitos en las regiones pobres fue acompañado por un crecimiento de la población débil (11% entre 1945 y 1980; por otra parte, el crecimiento demográfico en las regiones ricas alcanzó el 127%.In this paper we will analyse connections between regional development and the Savings Banks evolution in Spain, attending to regional GDP, per capita, and Savings Banks deposits accounts, gathered together by regions. Real GDP per capita, in all Spanish regions, increased quickly since 1959 (the 2nd Franco's era. Although, poor regions growth was stronger than that of the rich ones, in 1980, GDP per capita in poor regions didn't reach up to 59% of rich ones (even though in 1945 was only 43%.Savings Banks deposits per capita in poor regions were extremely short in 1945 (only 8% of the rich ones; nevertheless, in 1980 they reached 40%. Deposit increase in poor regions was also accompanied by a short population growth (11% between 1945 and 1980; on the other hand, demographic development in rich regions reached 127%.

  11. Opportunities for energy conservation detected in a diagnosis made for the smelting industry; Oportunidades de ahorro de energia detectadas en un diagnostico efectuado en la industria de la fundicion

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Bautista, Rolando; Magana Castro, Rogelio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

    1993-12-31

    The smelting industry is one of the main industrial branches in the utilization of electric power at national level, for this reason an energy diagnosis was made in representative industries of this process in which excellent results were obtained regarding opportunity areas, with potentials ranging from 15% up to 40% of energy saving in relation to the energy consumption, with actions recoverable in less than 15 months. [Espanol] La industria de la fundicion es una de las principales ramas industriales en la utilizacion de la energia electrica a nivel nacional, por esta razon se realizo un diagnostico energetico en empresas representativas de este proceso y en las cuales se obtuvieron excelentes resultados en cuanto a areas de oportunidad, teniendo potenciales que van desde un 15% hasta un 40% de ahorro con relacion al consumo de energia, con medidas que se recuperan en menos de 15 meses.

  12. Energy saving in the auxiliaries consumption for circulation water pumps optimizing the thermal regime; Ahorro en el consumo de auxiliares por bombas de agua de circulacion optimando el regimen termico

    Energy Technology Data Exchange (ETDEWEB)

    Orozco Martinez, Roni [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    A methodology is proposed that should be followed in any thermal electric power plant to determine the load value at which a unit requires a second circulation water pump without affecting the thermal regime and avoiding an excessive auxiliaries consumption in partial loads. In applying this method the power plant would have an energy saving equivalent to the auxiliaries consumption during an hour, when the unit as operating at full load. [Espanol] Se propone una metodologia que debe seguirse en cualquier central termoelectrica para determinar el valor de la carga en la cual una unidad requiere de la segunda bomba de agua de circulacion sin afectar el regimen termico y evitadose un excesivo consumo de auxiliares en cargas parciales. Al aplicar este metodo la central tendria un ahorro de energia equivalente al consumo de auxiliares durante una hora cuando la unidad esta generando su maxima carga.

  13. Método integral para mejorar el diseño de columnas de destilación, a partir de conceptos de ahorro de energía

    Directory of Open Access Journals (Sweden)

    Marco Antonio Ponce Guerrero

    2001-01-01

    Full Text Available Se presenta una metodología para analizar esquemas de destilación y proponer modificaciones que signifiquen ahorros de energía, mediante el uso de curvas de entalpía-temperatura que relacionan la operación simulada con el caso de una operación ideal reversible, tal como lo proponen Dhole y Linhoff. Se hace una aplicación a una columna de destilación atmosférica de crudo, que presenta un arreglo complejo con pumparounds y extracciones laterales. El resultado de adicionar un pumparound muestra una reducción en los consumos de energía, del orden de 400 millones de BTU/día, comprobando la utilidad de los métodos de análisis de procesos que utilizan la simulación.

  14. Propuesta de un sistema de aprovechamiento de agua lluvia como alternativa para el ahorro de agua potable, en la institución educativa María Auxiliadora de Caldas, Antioquia

    Directory of Open Access Journals (Sweden)

    Palacio Castañeda Natalia

    2011-11-01

    Full Text Available El aprovechamiento del agua lluvia es una práctica interesante, tanto ambiental como económicamente, si se tiene en cuenta la gran demanda del recurso sobre las cuencas hidrográficas, el alto grado de contaminación de las fuentes superficiales y los elevados costos por el consumo de agua potable en una institución educativa. Este proyecto presenta la ingeniería conceptual de una propuesta de diseño de un si stema de aprovechamiento de agua lluvia como alternativa para el ahorro de agua potable en usos tales como la descarga de sanitarios, el lavado de zonas comunes, entre otros. Se presenta, adicionalmente, un análisis aproximado de la viabilidad técnica y económica de dicho aprovechamiento en una institución educativa del municipio de Caldas, Antioquia. Se desarrollan en este documento tres aspectos principales: el cálculo de los volúmenes disponibles de agua lluvia en la zona, la evaluación del volumen de agua potable ahorrado con el aprovechamiento del agua lluvia, la estimación del presupuesto para la construcción del sistema y la proyección del ahorro generado al utilizarlo. Los resultados sugieren que el aprovechamiento de agua lluvia es una opción técnicamente viable, pero financieramente no, pues la inversión inicial es alta, por lo que es importante buscar financiación externa para desarrollar este tipo de proyectos que representan una solución interesante para contribuir al desarrollo sostenible de la institución educativa.

  15. Energy saving by means of air conditioning equipment replacement and the household application of thermal insulation; Ahorro de energia electrica por reemplazo de equipos de aire acondicionado y aplicacion de aislamiento termico en viviendas

    Energy Technology Data Exchange (ETDEWEB)

    Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de la Energia (Mexico)

    2005-07-15

    An extension study of the Financing Program for Energy Saving looked for the evaluation of the electric energy saving potential obtained by the replacement of air conditioning equipment and the application of thermal insulation in 30 houses of two Mexican cities with warmth climate. In a joint effort with Comision Federal de Electricidad the consumption files of the users were analyzed and field measurements of electric demand and of refrigeration were made. As a following step the change of the refrigeration necessities derived from the application of thermal insulation were evaluated as well as the energy efficiency improvement obtained by the substitution of the air conditioning equipment and the favorable results obtained by the implementation of both measures - thermal insulation and change of air conditioning equipment in a joint form. This way, as a conclusion, the optimum sequence of application of these measures is revealed. [Spanish] Un estudio extension del Programa de Financiamiento para el Ahorro de Energia Electrica busco evaluar el potencial de ahorro de energia electrica alcanzado por el reemplazo de equipos de aire acondicionado y la aplicacion de aislamiento termico en 30 viviendas de dos ciudades mexicanas con clima calido. En un esfuerzo conjunto con la Comision Federal de Electricidad se analizaron los historiales de consumo de los usuarios y se efectuaron las mediciones de campo de demanda electrica y de refrigeracion. Como paso siguiente se valoro el cambio en las necesidades de refrigeracion derivado de la aplicacion de aislamiento termico al igual que la mejora en eficiencia energetica obtenida por la sustitucion de aire acondicionado y se identificaron los resultados favorecedores arrojados por la implementacion de ambas medidas -aislamiento termico y cambio de equipo de aire acondicionado- en forma conjunta. De esta manera, como conclusion, se devela la mas optima secuencia de aplicacion de estas medidas.

  16. Results in energy saving obtained with the application of speed variator in fossil power stations; Resultados de ahorro de energia obtenidos con la aplicacion de variadores de velocidad en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Merlos Rueda, Rosa Maria [Programa de Ahorro de Energia del Sector Electrico (PAESE), Mexico, D. F. (Mexico)

    1999-07-01

    The project of installation of speed variator in fossil power stations (CT's) of Comision Federal de Electricidad (CFE), as an energy saving measure, is a pilot project that began with the support of the Subdivision de Generacion, and promoted by the Energy Saving Program of the Electric Sector (PAESE), with the putting in operation of an equipment in the condensate pump of the Punta Prieta II C. T. U3. The energy saving observed was substantial, fluctuating between the 19.4% at high loads (at 90% load) and the 71.1% at low loads (at 40% load) of the generating unit. With these results, it was decided to extend the scope of the project with the installation of 6 more equipment for equal number of fossil power stations, located in 4 of the 5 Regions of Generation. The fossil power stations, selected for this stage of the project were: C. T. Felipe Carrillo Puerto U1, C.T. Lerma U4, C.T. Salamanca U1, C.T. Monterrey U6, C.T. Francisco Villa U3 and the C.T. Punta Prieta II-U1. The equipment was in operation during the first quarter of 1998, and the first results indicate an energy savings average per equipment, between 39% and 52%. The recovery of the investment fluctuates between the 48.4% and the 87.6% in less than two years of operation, with which a maximum period of recovery of 3 years is expected. The estimated potential of energy saving, considering the application of these devices in condensate pumps, feedwater pumps (where no speed variator is installed) forced draft fans, induced draft fans and gas recirculation fans, as well as circulation water pumps, of the existing Generating Power stations, ascends to an annual total of 830,000, which represents an approximate 9.4% of the National consumption of self services. [Spanish] El proyecto de instalacion de variadores de velocidad en Centrales Termoelectricas (CT's) de la Comision Federal de Electricidad (CFE), como medida de ahorro de energia, es un proyecto piloto que se inicio con el apoyo de la

  17. Proceedings of the 24. National seminar on the rational use of energy and exposition of equipment and services and 7. Binational seminar on energy saving [Selected Papers]; 24. Seminario nacional sobre el uso racional de energia y exposicion de equipos y servicios y 7. Seminario binacional de ahorro de energia. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document contains the technical briefings of the 24. National Seminar on the rational use of energy, and exhibition of the equipment and services and the 7. Binational seminar on energy saving, organized by the Asociacion de Profesionistas y Tecnicos en Aplicacion Energetica (ATPAE), in Ciudad Juarez, Chihuahua, Mexico, from November 9 to 11, 2005. This seminar dealt with subjects such as: electrical energy saving, energy distribution, solar energy, energy saving in compressed air, biomass, administration and control of the demand of the electrical energy, bioclimatic architecture, use of the compressed natural gas, renewable energy, co-generation, qualification and consultancy for the intelligent use of the energy in PyMES. [Spanish] Este documento contiene la memoria tecnica del 24 Seminario Nacional sobre el uso racional de energia, y exposicion de los equipos y servicios y el 7 Seminario binacional de ahorro de energia, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Ciudad Juarez, Chihuahua, Mexico, del 9 al 11 de noviembre del 2005. Este seminario trato temas tales como: ahorro de energia electrica, distribucion de la energia, energia solar, ahorro de energia en aire comprimido, biomasa, administracion y control de la demanda de la energia electrica, arquitectura bioclimatica, uso del gas natural comprimido, energia renovable, cogeneracion, capacitacion y consultoria para el uso inteligente de la energia en las Pymes.

  18. GOBERNANZA MULTIFIDUCIARIA DE STAKEHOLDERS: ANÁLISIS COMPARADO DE LA EFICIENCIA DE BANCOS Y CAJAS DE AHORROS. / MULTIFIDUCIARY GOVERNANCE OF STAKEHOLDERS: A COMPARATIVE ANALYSIS OF THE EFFICIENCY OF BANKS AND SAVING BANKS.

    Directory of Open Access Journals (Sweden)

    Jose Luis RETOLAZA

    2012-05-01

    Full Text Available Las cajas de ahorros Españolas son posiblemente el caso más significativo a nivel mundial de entidades multistakeholders, no sólo por su misión, sino también en su gobernanza. La teoría multifiduciaria de los stakeholders plantea, al menos de forma teórica lo que en las cajas de ahorros ha sido una realidad por más de un siglo. Así, las cajas se convierten en un “caso de laboratorio” para analizar la viabilidad e idoneidad de una gobernanza participada por el conjunto de stakeholders de la organización. Nuestra hipótesis es que la gobernanza multistakeholder, así como la orientación hacia los stakeholders, generan un planteamiento estratégico diferente, no centrado en los beneficios. Por tanto, la gobernanza multifiduciaria puede perfectamente ser más ineficiente en relación con indicadores económico-financieros referidos a los shareholders de una entidad. Sin embargo, estas entidades deberían ser más eficientes si se tienen en cuenta indicadores relacionados con la generación de valor social. Con el fin de contrastar la eficiencia relativa hemos utilizando la población de bancos y cajas de España y los datos de 2009, utilizando la técnica de Análisis Envolvente de Datos con objeto de comparar la eficiencia económica, social y global de ambos tipos de entidades. Los resultados indican una diferenciación significativa entre estos dos grupos de entidades financieras en relación con la eficiencia social y económica, si bien no ocurre lo mismo cuando se utiliza la eficiencia global –económica más social-. Por lo que podemos concluir que la eficiencia en la gestión entre inputs y outputs en cajas de ahorros y bancos es similar. / Probably, Spanish savings banks are the most significant worldwide multistakeholders entities, not only because of their mission, but also in their governance. The stakeholder multifiduciary theory, establishes at least theoretically what the saving banks has been a reality for more than

  19. Ahorro energético en tándem de molinos de caña de azúcar mediante regulación de presiones hidráulicas//Energy saving in tandem of sugar cane mills by means regulation of hydraulic pressures

    Directory of Open Access Journals (Sweden)

    Jorge Michel Corrales‐Suárez

    2013-09-01

    Full Text Available Entre las áreas de mayor consumo de energía en un central azucarero se encuentra el tándem de molinos. Una de las variables que influye sobre este consumo es la presión hidráulica aplicada a la maza superior. La investigación tuvo como objetivo determinar las posibilidades de reducir este consumo regulandoapropiadamente las presiones hidráulicas sin disminuir la eficiencia del proceso de extracción, se llevó a cabo en un tándem de seis molinos donde solo se varió las presiones en los molinos intermedios según un diseño estadístico factorial completo 24. Las variables independientes fueron: las presiones hidráulicasen los molinos intermedios; las dependientes: la demanda de potencia, el % pol y % humedad. Se concluyó que en las condiciones del experimento, el empleo de presiones hidráulicas de trabajo menores en 3,45 MPa en los molinos intermedios, no afectó el proceso de extracción de la sacarosa, pero disminuyó en un 8,12% la demanda de potencia.Palabras claves: presión hidráulica, molino de caña de azúcar, ahorro de energía, tándem.______________________________________________________________________________AbstractAmong the areas of more energy consumption in a sugar power station is the tandem of mills. One of the variables that influences on this consumption is the hydraulic pressure applied to the superior mass. The investigation had as objective to determine the possibilities to reduce this consumption regulating the hydraulic pressures appropriately without diminishing the efficiency of the extraction process, it was carried out in a tandem of six mills where alone it was varied the pressures in the intermediate mills according to a complete factorial statistical design 24. The independent variables were: the hydraulic pressures in the intermediate mills; the dependents: the demand of power, the %pol and %humidity. You concluded thatunder the conditions of the experiment, the employment of hydraulic pressures

  20. Ahorro de dinero y de energía mediante la instalación de una conducción termoplástica en una refinería, EE.UU.

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1979-11-01

    Full Text Available This article describes the method used by and oil refinery to save some two hundred thousand dollars in the replacement of a seriously damaged stretch of a pipeline carrying salt water refrigerant. This substantial saving was obtained by installing high density polyethylene pressure pipe as a cover around the damaged pipe section. The same type of piping can be used in other industries (pulp and paper mills, Chemical processes pollution control, mining, textile mills, etc. where worm or abrasion corrosion damaged pipes can be found.

    Este artículo describe el método por el cual una refinería pudo ahorrarse unos doce millones de pesetas en la operación de repuesto de un tramo muy deteriorado de una conducción que transporta agua salada refrigerante. Este ahorro substancial se obtuvo gracias al uso de futras de presión de polietileno, de alta densidad, como revestimiento de la sección deteriorada de la tutoría. El mismo tipo de tubería se puede emplear también en otras industrias (pastas, papel, procesos químicos, control de polución, minería, textil, etcétera donde existan conducciones desgastadas o deterioradas por corrosión o abrasión.

  1. Estimated saving potential and efficient use of energy in air conditioning by means of the solar protection; Potencial estimado de ahorro y uso eficiente de energia en aires acondicionados mediante la proteccion solar

    Energy Technology Data Exchange (ETDEWEB)

    Mejia D, David; Morillon G, David; Rodriguez V, Luis [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2001-07-01

    In here it is presented the analysis of the impact of the solar gains through the transparent parts of a prototype house of social interest, located in a dry warm climate. This analysis was made to determine the gains through windows for the summer time and under the following conditions: without outside solar protections, with the use of eaves, solar breakers and finally with the use of both systems of solar protection. The results were compared to obtain the considered potential of energy saving in cooling equipment, that could be obtained in future houses to build. [Spanish] Se presenta el analisis del impacto de las ganancias solares a traves de las partes transparentes de un prototipo de vivienda de interes social, ubicado en un clima calido seco. Dicho analisis se realizo para determinar las ganancias a traves de ventanas para la epoca de verano y bajo las siguientes condiciones: sin protecciones solares exteriores, con el empleo de aleros, con quiebrasoles y finalmente con el empleo de ambos sistemas de proteccion solar. Se compararon los resultados para obtener el potencial estimado de ahorro de energia en equipo de enfriamiento, que se tendria en las futuras viviendas por construir.

  2. Design

    Science.gov (United States)

    Buchanan, Richard; Cross, Nigel; Durling, David; Nelson, Harold; Owen, Charles; Valtonen, Anna; Boling, Elizabeth; Gibbons, Andrew; Visscher-Voerman, Irene

    2013-01-01

    Scholars representing the field of design were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Richard Buchanan, Nigel Cross, David Durling, Harold Nelson, Charles Owen, and Anna Valtonen. Scholars…

  3. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    2009-01-01

    Design - proces og metode går bag om designerens arbejde og giver et indblik i den skabelsesproces, som designeren er involveret i. Bogen er enestående, fordi den fokuserer på processens flygtige og komplekse karakter, afmystificerer den og gør den operationel - uden at fjerne dens magi. Ud over...

  4. PETv4.2 : Thermal equilibrium profiles as tools in architectural design; PETv4.2 : Les profils d'equilibre thermique comme outil d'aide a la conception architecturale

    Energy Technology Data Exchange (ETDEWEB)

    Potvin, A.; Demers, C.; Boivin, H. [Laval Univ., Quebec City, PQ (Canada). GRAP Groupe de recherche en ambiances physiques

    2004-07-01

    This paper introduces the notion of thermal equilibrium of a building as a tool in the design of architectural bioclimate. The characteristics of climate, occupation, and architectural form can be used to determine daily heating and cooling profiles on an annual basis, thus providing a method to design the environmental characteristics of a building at the early design stages of a project. The authors developed this method in response to the widespread use of complex thermal behaviour of buildings in architectural teachings and workshops. The iterative structure of the PETv4.2 software was described, and an example from the tourist and environmental pavilion of Roche d'Oetre in Normandie, France was presented. The concept of thermal equilibrium in architectural design considers the building as a dynamic interface of thermal transactions between the interior and the exterior space. 10 refs., 1 tab., 9 figs.

  5. The relation between preventive maintenance and energy saving, planning and production control; La relacion entre el mantenimiento preventivo y el ahorro de energia planeacion y control de la produccion

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Cazarez, Mario [Coorporacion de ingenieros en aire acondicionado y mantenimiento en general (Mexico)

    2003-07-01

    In this paper the importance that the preventive maintenance has as an important ingredient of the internal policies of the companies for the promotion of the energy saving is discussed. It considers that the department of planning and production control must take into account very seriously the importance of programmed preventive maintenance in order to maintain the continuity of the production process and with this eliminate the bottle necks that adversely affect it and consequently the the company's image before the clients, besides contributing positively the promotion of energy saving. The faults that stop the production process inflict losses of income and adversely affect the yield of the company, in addition, they increase the production cost or the plant expenses associated to the repair of the damaged equipment, in the worst of the cases, important penalties will have to be paid for the delayed delivery of the product to the client. By keeping the correct operation of the equipment, increasing its availability and assuring that all the safeties of these operate correctly we will be contributing to the optimal operation of the enterprise system and avoiding the additional consumption of energy associated to the failure of an equipment and interruption of the production line. The preventive maintenance also promotes, the order and the cleanliness, the safety and hygiene in the work centers and the protection to the environment. Once the prevention has won the battle to the correction, one enters the field of diagnosis, handling the service periods in an optimal way in benefit of the production line. In this stage it can be spoken of entering the application of Total Productive Maintenance. [Spanish] En este trabajo se discute la importancia que tiene el mantenimiento preventivo como un ingrediente importante de las politicas internas de las empresas para la promocion del ahorro de energia. Considera que el departamento de planeacion y control de la

  6. Energy saving in the pumping of drinking water, Municipality of San Felipe, Guanajuato; Ahorro de energia electrica en bombeo de agua potable, en el municipio de San Felipe, Gto.

    Energy Technology Data Exchange (ETDEWEB)

    Gamiz Sanchez, Lorenzo [Applied Technology Center de Mexico, S.A. de C.V. (Mexico)

    2006-01-15

    This paper shows the results attained in energy saving through a project of potable water pumping, which took an investment of $433,043.00 and an internal rate of return of 126%. This project puts into evidence that it is possible to reduce between 15 and 30% of the total invoicing for energy consumption in potable water pumping if an equipment of poor efficiency is replaced by another of high efficiency. The project was requested by the Guanajuato's State Water Comision and the Municipal Bureau of Sewage and Potable Water, with the double intention of reducing the energy consumption along with the corresponding invoicing and incrementing the output of the wells in order to improve the potable water supply. In the site two high efficiency submersible motor-pumps were installed previously to the energy diagnosis that triggered profitable operation results and a convenient invoicing. [Spanish] Se documentan los resultados obtenidos en un proyecto de ahorro de energia en el bombeo de agua potable realizado con una inversion de $433,043.00 y con una tasa interna de retorno de 126%. Este proyecto pone en evidencia que es posible reducir entre el 15 y 30% de la facturacion total por consumo de energia electrica en el bombeo de agua potable si se sustituye un equipo poco eficiente por otro de alta eficiencia. El proyecto fue solicitado por la Comision Estatal del Agua de Guanajuato y la Junta Municipal de Agua Potable y Alcantarillado del municipio, con un doble proposito, reducir el consumo de energia junto con la facturacion correspondiente e incrementar la capacidad de produccion de los pozos con la intencion de mejorar el abasto de agua potable. En el lugar se instalaron dos motobombas sumergibles de alta eficiencia previo diagnostico energetico que desencadenaron rentables resultados operativos y de facturacion.

  7. The climatic change and the new demands in dwelling design; El cambio climatico y las nuevas exigencias en el diseno de la vivienda

    Energy Technology Data Exchange (ETDEWEB)

    Tardan Waltz, Jenny [Asociacion de Empresas para el Ahorro de la Energia en la Edificacion, A.C. (Mexico)

    2007-10-15

    In Mexico, the culture of energy saving began more than one decade ago, but the benefits are not yet concrete. The Mexican society, requires new designs of dwellings adapted to its needs and in addition modifies the present systems of construction that do not include criteria of design for the thermal comfort, the energy saving and the sustainability. It is urgent to reconsider the urbanism of the cities, as well as the promotion of the concept of sustainable development in all the branches of human activity. The design of dwellings must significantly integrate the energy and environmental components to reduce to the power consumption and the CO{sub 2} emissions. [Spanish] En Mexico, la cultura de ahorro de energia se inicio hace mas de una decada, pero los beneficios aun no son palpables. La sociedad mexicana, requiere de nuevos disenos de viviendas que se adapten a sus necesidades y que ademas modifiquen los sistemas de construccion actuales que no incluyen criterios de diseno para el confort termico, el ahorro de energia y la sustentabilidad. Es urgente reconsiderar el urbanismo de las ciudades, asi como la promocion del concepto de desarrollo sustentable en todas las ramas de la actividad humana. El diseno de la vivienda debe integrar los componentes energeticos y medioambientales, para reducir significativamente el consumo de energia y las emisiones de CO{sub 2}.

  8. Bio-climatic strategy for energy saving in corporative buildings. City Juarez, Chihuahua, Mexico; Estrategia bioclimatica para ahorro energetico en edificios corporativos. Ciudad Juarez, Chihuahua, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Staines Orozco, E. R.

    2008-07-01

    Ciudad Juarez Chihuahua in Mexico is located in of de biggest Desert of Arid America called Chihuahuan Desert, and is there in where this border city with United State of North America and one of the border cities of greater commercial importance (a million six hundred thousands pop. approx.) has been develop to great influence of wasteful constructive systems of nonrenewable resources as they are the gas and electricity. These building take back surpassed models. In this article presents a design of a model of corporative building of five floors that counts including all a strategy from the process of architectonic design to the applications of echo passive and active Technologies (hybrid) like one of a ventilation tower, strategy that applied guarantees the significant saving to use energy. (Author)

  9. LA CONTRIBUCIÓN DE LAS COOPERATIVAS DE AHORRO Y CRÉDITO AL DESARROLLO LOCAL EN QUERETARO, MÉXICO / THE CREDIT SAVING COOPERATIVE´S CONTRIBUTION TO THE MEXICAN LOCAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Graciela LARA GÓMEZ

    2011-09-01

    Full Text Available A partir de una aproximación teórica y empírica a las empresas sociales y su rol en el desarrollo local, se buscó establecer cómo las cooperativas de ahorro y crédito constituyen una estrategia pertinente para el avance social y económico de las comunidades mexicanas. Para tal efecto se recurrió al método cualitativo recurriendo a la estrategia de estudio de caso, seleccionando cuatro organizaciones ubicadas en zonas clasificadas como de alta marginación de acuerdo con indicadores oficiales en México. Los casos corresponden a cooperativas fundadas con la participación de miembros de la iglesia católica y cuya actividad financiera ha sido fundamental en el ámbito local en el que funcionan. Los resultados muestran que la organización de cooperativas, la acción voluntaria de sus miembros y en algunos casos el apoyo del Estado, constituyen instrumentos eficaces en la promoción del desarrollo local. Los principales beneficios en favor de los asociados se traducen en el otorgamiento de créditos y de servicios adicionales como becas educacionales y servicios de salud. Pudo constatarse, que con la práctica de los principios y valores del cooperativismo se facilita el trabajo en equipo y los asociados desarrollan habilidades emprendedoras y directivas que los benefician individual y colectivamente mejorando su calidad de vida. / From an empiric and theoretical approach to the social enterprises and its role at the local development, it was sought to establish how the credit and saving cooperatives are a pertinent strategy for the economic and social advance from the Mexican communities. For this purpose the qualitative method was used to utilize the study case strategy; it were selected four organizations located in classified areas as high marginalization according to the official Mexican indicators. The cases are cooperatives founded with the participation from members of the Catholic Church and whose financial activity has being

  10. Las Unidades Básicas de Análisis para la Gestión de las Cajas de Ahorros y las Cajas Rurales Españolas: Un Análisis Comparativo

    Directory of Open Access Journals (Sweden)

    Pilar Ibarrondo Dávila

    2002-06-01

    Full Text Available Las unidades básicas de análisis para la gestión de las entidades de depósito representan los ejes centrales en tomo a los cuales se debe generar la información que suministra el sistema de contabilidad de gestión y, por consiguiente, se configuran como un instrumento esencial para apoyar las decisiones gerenciales. En este artículo, tras delimitar las unidades de análisis básicas para los sistemas de información de las cajas rurales y las cajas de ahorros, presentamos los resultados obtenidos a través de una encuesta realizada en dichas entidades, al objeto de contrastar la importancia que ostentan dichas unidades de análisis en sus sistemas de información. El estudio empírico llevado a cabo ha puesto de manifiesto que la unidad de análisis por excelencia en ambas categorías de entidades es la oficina, seguida por las direcciones regionales o de zona. Los productos y los clientes presentan un menor grado de implantación en sus sistemas de información, en especial en las cajas rurales. The basic units of analysis for managing Depository Financial Institutions are the central axes where management accounting information should be generated and, consequently, are also formed as an essential instrument to support the managerial decisions. Once the basic analysis units for information systems in the rural and savings banks are defined, we offer the results obtained by means of a survey carried out in the aforementioned institutions. So the relevance of this analysis unit in their information systems may be known. The empirical study carried out has shown that the main analysis unit in both categories of entities is the branch office, followed by regional management. Products and customers have a minor relevance in their information systems, particularly in the rural banks.

  11. The daylight alternative for energy conservation saving in lighting systems; La luz natural alternativa para el ahorro de energia en sistemas de iluminacion

    Energy Technology Data Exchange (ETDEWEB)

    Escutia Perez, A.; Cruz Mendez, E. P. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico D. F. (Mexico); Buitron Sanchez, H. [Programa de Ahorro de Energia del Sector Electrico, Mexico D. F. (Mexico)

    1995-12-31

    The technological advances generate far reaching changes in all types of installation. The new spaces and the existing ones justify the introduction of new technologies taking into account important economic considerations, mostly when the advantage of daylight is taken into consideration in industrial and commercial lighting. In the daylight design it is necessary to know the solar transit, the atmospheric conditions, the architectural design of the building, the materials and the control elements, etc. to apply with precision the calculation method. The fundamental lighting technic have varied little. In the greatest part of commerces and industries the general lighting is used, that produces an illumination more or less uniform on the working areas, which guarantees a total freedom for the placement of machinery, working benches, racks, exhibitors, clothes racks, etc.. This type of lighting is obtained by means of the use of a more or less regular series of skylights. The adequate localized lighting is used in those zones where because of the presence of obstructions or unfavorable slant of the working plan are not sufficiently well lighted by the general lighting system. The daylight use in accordance with the every moment availability will permit in many working centers a sensible diminution of the artificial lighting time, provided that the characteristics of the control operation of the installation permit it, along with modern controlling devices and the great variety of efficient saving lamps. [Espanol] Los avances tecnologicos generan cambios trascendentes en todo tipo de instalacion. Los nuevos espacios y los ya existentes justifican la introduccion de nuevas tecnologias teniendo consideraciones economicas importantes, sobre todo cuando se aprovecha la luz natural en sistemas de alumbrado industrial y comercial. En el diseno de iluminacion natural, es necesario tener el conocimiento del transito solar, las condiciones atmosfericas, el diseno

  12. The Norm NOM-008-ENER-2001 offers an important saving option; La Norma NOM-008-ENER-2001 ofrece una importante opcion de ahorro

    Energy Technology Data Exchange (ETDEWEB)

    Lalana, Emiliano Ramiro [Fideicomiso para el Ahorro de la Energia Electrica (Mexico)

    2006-01-15

    The Norm NOM-008-ENER-2001 no longer commands the efficient handling of energy from functional equipment or apparatuses but from a well planned architectural design that allows diminishing the energy use for cooling purposes, consequently this Norm refers to the conduction and radiation principles regulating the heat gain through the cover portions of a building. The Norm defines a reference theoretical building that will dictate the propitious heat gain for the projected buildings. Here the functioning logic of the Norm in respect to both principles is mathematically explained as well as an application example is developed considering the calculations made for the Norm's reference building and for the projected one, the final revision of the fulfillment of the norm, proposals of solutions and the conclusions. [Spanish] La Norma NOM-008-ENER-2001 comanda el manejo eficiente de energia electrica ya no a partir de equipos o aparatos funcionales sino a partir de un bien planeado diseno arquitectonico que permita disminuir el uso de energia para fines de enfriamiento. Por ende, esta norma se refiere a los principios de conduccion y radiacion regulando la ganancia de calor a traves de la envolvente y porciones de un edificio. La Norma define un edificio teorico de referencia que dictara la ganancia de calor propicia para los edificios proyectados. Aqui se explica matematicamente la logica de funcionamiento de la Norma respecto a ambos principios asi como se desarrolla un ejemplo de aplicacion que considera los calculos realizados para el edificio de referencia de la Norma y para el proyectado, la revision final del cumplimiento de la Norma, propuestas de solucion y conclusiones.

  13. Windows with selective covering to the solar radiation based in copper for saving energy; Ventanas con recubrimiento selectivo a la radiacion solar basado en cobre que permiten el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Genaro; Almanza, Rafael [Instituto de Ingenieria UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    savings and the necessary strategies for such aim, based on the geographic region. [Spanish] Se presentan los resultados de un esfuerzo por contribuir al desarrollo de nuevos elementos constructivos acordes a las necesidades bioclimaticas de las edificaciones en Mexico que propicien el ahorro de energia. Se desarrollaron ventanas con dos tipos de recubrimientos, uno exclusivamente de oxido cuproso (Cu{sub 2}O), y otro resultado del deposito sucesivo de una pelicula de sulfuro cuprico (CuS) sobre otra de oxido cuproso. El segundo tipo de ventanas presento un adecuado control al paso de la radiacion infrarroja, lo que permite reducir aun mas la cantidad de radiacion calorifica que pasa a traves de la ventana. Durante las condiciones de calentamiento, estas ventanas dejan pasar en el peor de los casos, la mitad del calor, reduciendo la carga termica al interior de la habitacion o del edificio. Durante condiciones de enfriamiento, la ventana permite la salida del calor a la mitad de la velocidad, manteniendo durante mas tiempo la temperatura de confort del interior. Los recubrimientos de los mencionados compuestos de cobre fueron fabricados en los laboratorios de los Institutos de Ingenieria y Fisica de la Universidad Nacional Autonoma de Mexico (UNAM). Se utilizo la tecnica de erosion ionica o sputtering de un blanco de cobre 99.999% con ayuda de un plasma compuesto de argon (70%) y oxigeno (30%), que posibilita la oxidacion del cobre y el deposito del Cu{sub 2}O. Se utilizo un sustrato de vidrio flotado comercial de 600x400 mm., este tamano del vidrio estuvo determinado por las limitaciones de espacio de nuestra camara de deposito. La ventana asi obtenida presenta una agradable coloracion amarillenta y gran luminosidad, sin embargo, en el infrarrojo cercano, unicamente bloquea el 50%. Para las propiedades deseadas de control termico era necesario reducir aun mas el paso del calor. Para ello se incorporo una pelicula de sulfuro cuprico con la cual fue posible alcanzar

  14. Energy saving in the pig iron production in the blast furnace no. 5; Ahorro de energia en la produccion de arrabio en el alto horno No. 5

    Energy Technology Data Exchange (ETDEWEB)

    Gil Diaz, Ricardo A.; J Quiroz, Francisco; Rodriguez, Rita Patricia; Banuelos Garza, Yolanda [Altos Hornos de Mexico, S. A., Coahuila (Mexico)

    1993-12-31

    Altos Hornos de Mexico (AHMSA) is an iron and steel industry integrated to Grupo Acereros del Norte in Monclova, in the Coahuila state. With an a installed capacity of 3.1 millions of tons per annum o liquid steel. In its installations, AHMSA has the highest capacity blast furnace installed in Mexico, blast furnace No. 5, that has a useful volume of 2,163 cubic meters, designed to produce 4,800 tons of pig iron per day. The basic goal to achieve in the operations involved in the production of steel through the pig iron production in the blast furnace, is the hot metal production at the lowest attainable cost within the quality requirements specified by the steel makers. The most important criterion for the recognition of the attained success is the fuel consumption per ton of pig iron produced, with coke as the main fuel fed to the blast furnace and therefore of the greatest impact on the final product cost. AHMSA contemplated within its strategic plan, the reduction in the production of its coking plants derived from the natural aging of its furnaces, consequently it is pending the shortage of coke for productions higher than 2.6 MMT of liquid iron. In response to this, and faced to the true need of diminishing the production costs in the process of making pig iron, new practices have been implemented in the use of complementary fuels to partially substitute the metallurgical coke as an energy source for the blast furnace process. The use of natural gas, fuel oil and the gradual increase of the temperature of hot blow, have strongly impacted the metallurgical coke consumption, lowering it considerably and diminishing the costs per ton of pig iron in blast furnace No. 5. Another important issue, is the utilization of coke fines resulting form the sieving of the same, directly fed to the furnace load. This practice reduced the coke consumption, and most of all, the output of our coking plants was increased on being utilized at the maximum coke production

  15. Energy saving in the pig iron production in the blast furnace no. 5; Ahorro de energia en la produccion de arrabio en el alto horno No. 5

    Energy Technology Data Exchange (ETDEWEB)

    Gil Diaz, Ricardo A.; J Quiroz, Francisco; Rodriguez, Rita Patricia; Banuelos Garza, Yolanda [Altos Hornos de Mexico, S. A., Coahuila (Mexico)

    1993-12-31

    Altos Hornos de Mexico (AHMSA) is an iron and steel industry integrated to Grupo Acereros del Norte in Monclova, in the Coahuila state. With an a installed capacity of 3.1 millions of tons per annum o liquid steel. In its installations, AHMSA has the highest capacity blast furnace installed in Mexico, blast furnace No. 5, that has a useful volume of 2,163 cubic meters, designed to produce 4,800 tons of pig iron per day. The basic goal to achieve in the operations involved in the production of steel through the pig iron production in the blast furnace, is the hot metal production at the lowest attainable cost within the quality requirements specified by the steel makers. The most important criterion for the recognition of the attained success is the fuel consumption per ton of pig iron produced, with coke as the main fuel fed to the blast furnace and therefore of the greatest impact on the final product cost. AHMSA contemplated within its strategic plan, the reduction in the production of its coking plants derived from the natural aging of its furnaces, consequently it is pending the shortage of coke for productions higher than 2.6 MMT of liquid iron. In response to this, and faced to the true need of diminishing the production costs in the process of making pig iron, new practices have been implemented in the use of complementary fuels to partially substitute the metallurgical coke as an energy source for the blast furnace process. The use of natural gas, fuel oil and the gradual increase of the temperature of hot blow, have strongly impacted the metallurgical coke consumption, lowering it considerably and diminishing the costs per ton of pig iron in blast furnace No. 5. Another important issue, is the utilization of coke fines resulting form the sieving of the same, directly fed to the furnace load. This practice reduced the coke consumption, and most of all, the output of our coking plants was increased on being utilized at the maximum coke production

  16. Caracterização bioclimática de sistemas ao ar livre e confinado para a criação de matrizes suínas gestantes Bioclimatic characterization of outdoor and confined systems for pregnant sows

    Directory of Open Access Journals (Sweden)

    Aérica C. Nazareno

    2012-01-01

    Full Text Available O confinamento de matrizes suínas foi criado com o intuito de maximizar a produtividade; entretanto, existem problemas relacionados ao bem-estar animal. Objetivou-se avaliar a criação de matrizes suínas gestantes no sistema de confinamento e ao ar livre, com relação ao ambiente térmico e às respostas fisiológicas. O experimento foi realizado em Monte Mor/SP. A avaliação fisiológica foi realizada por meio do registro das variáveis: frequência respiratória e temperatura de pele. Foram registradas as variáveis meteorológicas: temperatura de bulbo seco, temperatura de bulbo úmido e temperatura de globo negro, caracterizando o ambiente por meio da entalpia e índice de temperatura de globo e umidade. Foram utilizados seis animais por tratamento. O delineamento experimental foi inteiramente casualizado em parcelas subdivididas, e as médias comparadas pelo teste de Tukey. As variáveis fisiológicas e meteorológicas apresentaram valores superiores no confinamento. O sistema de criação ao ar livre potencializou as trocas térmicas entre os animais e o ambiente, o que refletiu em menor estresse por calor observado nos animais.Pregnant sows confinement systems were created in order to maximize the productivity, however there are problems concerning the animal welfare. The aim of this research was to evaluate pregnant sows in outdoors and in confinement systems in relation to the thermal environment and physiological animal responses. The experiment was conducted in a commercial farm in Monte Mor city, São Paulo, Brazil. The physiological evaluation was performed by recording physiological variables, such as respiratory frequency and skin temperature. Furthermore, variables like dry bulb temperature, wet bulb temperature, and black globe temperature were also evaluated to characterize the ambient by means of enthalpy and black globe humidity index. In each treatment six animals were evaluated. The experimental design was completely

  17. LAS CAJAS DE AHORRO Y LAS COOPERATIVAS DE CRÉDITO ANTE LA CRISIS: EVOLUCIÓN EN SU PRESENCIA TERRITORIAL Y EN SU OPERATIVA / SAVING BANKS AND CREDIT CO-OPERATIVES FACED WITH THE CRISIS: THE CHANGES IN THEIR LOCALIZATION AND PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Jesús PAÚL GUTIÉRREZ

    2010-01-01

    Full Text Available El artículo estudia el impacto que la crisis económica y financiera está teniendo en las entidades bancarias de carácter social, en especial en sus estrategias de financiación y de localización territorial. En primer lugar, se analizan las crecientes necesidades de financiación de la economía española durante el pasado ciclo expansivo y el decisivo papel de las instituciones financieras en la canalización del ahorro externo. Posteriormente, se analiza la evolución de la presencia territorial de las cajas de ahorro y de las cooperativas de crédito, así como la distribución de sus operaciones activas y pasivas. El análisis se realiza diferenciando dos períodos, uno desde el inicio de los noventa hasta el verano de 2007, momento en el que se inicia la crisis, y un segundo período, desde el cuarto trimestre de 2007 hasta la actualidad. / This paper examines the impact that the international economic and financial crisis is having on the behaviour of Spanish social banking institutions, particularly in their funding and localization strategies. First of all, we analyse the growing net borrowing of the Spanish economy in the former economic expansion cycle and how the national financial institutions were the primary source of foreign financing. Secondly, we analyse the evolution of territorial localization of saving banks and credit co-operatives, and of their lending and borrowing transactions. In this analysis we are going to difference two periods: since the beginning of nineties until August 2007, the start of the international financial, and a second period since the fourth quarter 2007 until now.

  18. Espacio Residencial y Racionalidad Bioclimática.

    OpenAIRE

    Luxan Garcia de Diego, Margarita de

    2008-01-01

    Como es una especie de introducción, que entiendo que debe ser cortita, he escogido que en vez de hablar de mis obras, voy a hablar de mis preocupaciones. Entre otras razones porque creo que casi es más interesante hacer público señalar cosas que hacen falta tanto de investigación, como de análisis y de elementos de trabajo. Y en ese sentido voy a hablar sobre todo de mis dudas en ese límite entre los que hacen los urbanistas y lo que hacen los arquitectos; porque cada vez veo más imposible d...

  19. Methodology for bioclimatic design; Metodologia para el diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Morillon Galvez, David [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    A methodology for natural air conditioning of buildings is presented; bioclimatic architecture, in order to contribute to the suitable use of components of the building (walls, ceilings, floors, orientations, etc.) that when interacting with the environment takes advantage of it, without deterioration of the same, obtaining energy efficient designs. As well as an analysis of the elements and factors that the architecture must have to be sustainable; an adequate design to the environment, saving and efficient use of energy, the use of alternating energies by means of ecotechnologies and the self-sufficiency. [Spanish] Se presenta una metodologia para la climatizacion natural de edificios; arquitectura bioclimatica, con el objetivo de aportar al uso adecuado de componentes del edificio (muros, techos, pisos, orientaciones, etc.) que al interactuar con el ambiente tome ventaja de el, sin deterioro del mismo, logrando disenos energeticamente eficientes. Asi como un analisis de los elementos y factores que debe tener la arquitectura para ser sustentable; un diseno adecuado al ambiente, ahorro y uso eficiente de la energia, el uso de energias alternas mediante ecotecnologias y la autosuficiencia.

  20. Heat pumping using the thermal earth gradient to produce air conditioned and hot water with savings of up to 70%; Bombeo de calor utilizando el gradiente termico de la tierra para producir aire acondicionado y agua caliente con ahorros de hasta un 70%

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Ramirez, Alejandro [Novaenergia de Mexico S.A. de C.V. (Mexico)

    2003-07-01

    The pumping of heat using the Earth heat as partial energy source bases its principle on which the energy of the ground is constant and the energy efficiency to produce air conditioning and hot water simultaneously is important, obtaining savings up to 70%, comparing itself with the traditional equipment and what these operate of separated way to produce each one of them the cold air and the hot water. The use of this technology presents an opportunity to reduce the energy costs of and the demand of the company. [Spanish] El bombeo de calor utilizando el calor de la tierra como fuente parcial de energia basa su principio en que la energia del suelo es constante y el rendimiento energetico para producir simultaneamente aire acondicionado y agua caliente es importante, obteniendose ahorros hasta de un 70%, comparandose con los equipos tradicionales y que estos operan de manera separada para producir cada uno de ellos el aire frio y el agua caliente. El uso de esta tecnologia presenta una oportunidad para reducir los costos de energia y demanda de la empresa.

  1. LA EXPANSIÓN TERRITORIAL COMO FACTOR MOTIVADOR DE LA REESTRUCTURACIÓN DEL SISTEMA FINANCIERO ESPAÑOL: EL CASO DE LAS CAJAS DE AHORROS Y LAS COOPERATIVAS DE CRÉDITO / THE TERRITORIAL EXPANSION AS A MOTIVATING FACTOR OF THE RESTRUCTURING OF THE SPANISH FINANCIAL SYSTEM: THE CASE OF SAVING BANKS AND CREDIT COOPERATIVES

    Directory of Open Access Journals (Sweden)

    Milagros GUTIÉRREZ FERNÁNDEZ

    2012-01-01

    Full Text Available La actual crisis financiera internacional está actuando como catalizador de un profundo proceso de cambio en el sector bancario español que está afectando también a las entidades de crédito de la Economía Social: cajas de ahorros y cooperativas de crédito. Su modelo de banca “minorista”, centrada en la cercanía al cliente, se ha visto acompañado en los últimos años de un fuerte proceso de expansión geográfica que ha supuesto un sobredimensionamiento de su red de sucursales. Sin embargo, como consecuencia de las actuales circunstancias de la economía española en general, y del sistema bancario en particular, dicha estrategia de desarrollo interno no parece sostenible, siendo necesario que se produzca un redimensionamiento del sector, para ver recuperada la confianza en el sistema y para que éste vuelva a ser considerado como uno de los más solventes del mundo. Bajo este enfoque, el objetivo de este trabajo es analizar las distintas estrategias de expansión territorial desarrolladas por dichas entidades con el objetivo de plasmar su situación actual y comprender por qué es necesaria la reestructuración del sector. Para ello se ha empleado tanto el análisis descriptivo como el econométrico, utilizando en todo momento los datos que presentan la Confederación Española de Cajas de Ahorros (CECA y la Unión Nacional de Cooperativas de Crédito (UNACC en sus anuarios estadísticos. / The current financial international crisis is acting as catalyst of a deep process of change in the Spanish banking sector which is affecting also the credit institutions of the Social Economy: saving banks and credit cooperatives. These entities share a model of "retail" banking, centered on the nearness to the client, that has been accompanied in the last years of a strong process of geographical expansion which has supposed an oversizing of its network of branches. Nevertheless, as a consequence of the current circumstances of the Spanish

  2. Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

    Energy Technology Data Exchange (ETDEWEB)

    Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

    1998-12-31

    It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

  3. Economic, environmental and social impacts of geothermal development, and energy savings and efficient use of power in Baja California, Mexico; Impactos economicos, ambientales y sociales del desarrollo geotermico y del ahorro y uso eficiente de la electricidad en Baja California, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Campbell R, Hector E.; Montero A, Gisela [Universidad Autonoma de Baja California, Instituto de Ingenieria, Mexicali, Baja California (Mexico)]. E-mail: hecr@iing.mxl.uabc.mx; Lambert A., Alejandro A. [Universidad Autonoma de Baja California, Facultad de Ingenieria, Mexicali, Baja California (Mexico)

    2011-01-15

    remain at 2200 tons per year (t/a), emitted mainly from geothermal-electric units. NO{sub x} emissions will increase from 6000 t/a in 2005 to 24,000 t/a in 2025, and CO{sub x} will rise from 3.4 million t/a in 2005 to 12.7 million t/a in 2025. The cost of generation will be affected by changes in the energy matrix, and the use of natural gas will predominate. In absolute values it will increase from $648 million USD in 2005 to $2273 million USD in 2025. The cost will depend on an use up to 70% of natural gas. The proposed goals of the Systemic Planning focused on: a) reduce own uses of electricity during generation, b) reduce electric own uses and electric losses during transmission and distribution, c) reducing the growth of electric consumption in the industrial sector, and d) increasing the share of geothermal energy. In a comparison of the Systemic Planning System with the Prospective, increasing in 500 MW the geothermal installed capacity will increase the investment cost, but the balance of net exports, carbon credits and reduced consumption of natural gas indicates a total savings of $11 billion USD and a decrease of 2.3 million tons of CO{sub x}. The geothermal growth combined with the saving and efficient electrical use was rated the best plan, with a total savings of $13.5 billion USD and a decrease in emissions of 8.5 million tons of CO{sub x}. [Spanish] Se presenta un ensayo de Planeacion Electrica para Baja California, Mexico, que incluye el diagnostico de produccion y consumo electrico 1994-2005, la prospectiva al ano 2025 manteniendo las tendencias historicas, y la planeacion sistemica al incidir en la prospectiva mediante acciones de ahorro y uso eficiente de la electricidad y el incremento de la participacion de la geotermia. El diagnostico indica que en 1998 la capacidad geotermoelectrica representaba el 57%, y para 2004 el 73% estaba basado en gas natural, aumentando la dependencia energetica. La generacion cambio de una relacion de 2 a 1 de vapor

  4. Energy saving based on the reduction of losses in the transmission and distribution of the power generated incrementing the transmission capacities by means of the use of direct current; Ahorro de energia basado en la reduccion de perdidas en la transmision y redistribucion de la generacion al ampliar las capacidades de transmision por medio del empleo de la transmision en corriente directa

    Energy Technology Data Exchange (ETDEWEB)

    Meraz Ateca, E.; Alanis Rodriguez, J.P.; Salinas Barrera, H.; Arechiga Rodriguez, L.D.; Guerrero Garza, J.J. [Comision Federal de Electricidad (CFE) (Mexico)

    1995-12-31

    alternating current terminal is recovered from the power lines and there will not be generation restrictions because of the unavailability of alternating current power lines; the achieved reliability is not evaluated, but it will be another benefit. The other option proposed for the project of utilization of power lines with direct current, consists in modifying or using the tie that will be constructed for the Rio Escondido Thermal Electric Station to the Northern Zone and that will operate in parallel with the alternating current network. This project provides the benefits of saving losses of about 20 MW. It is also achieved the increase in effective transmission capacity towards the Northern Zone, due to the fact that it will be Also available a controlled power mean, which facilitates the dispatch functions and re-distribution of power flows in the alternating current network. This tie is proposed of 500 MW operating in bi-polar form at least of 400 KV and reaching up to the Chihuahua Zone, allowing besides the re-dispatching of units to the Northern Zone in counting with greater capacity of effective transmission. The saving in re-dispatching could be significative; additionally, this tie will free transmission capacity from the Coal Power Stations towards the Monterrey Zone. This paper does not get deeper into the advantages regarding the dynamic behavior of the electric system in operating these ties in direct current, but they are not less important, since they can contribute with great benefits to the system during disturbance or emergency conditions. [Espanol] El presenta trabajo propone el empleo de la tecnologia de transmision en corriente directa, que proporciona un ahorro de perdidas de orden del 50% al transmitir la misma cantidad de potencia que la linea energizada en corriente alterna, asi como el contar con una mayor capacidad de transmision, dado que la limitante en la linea trabajando en corriente directa esta dada por su capacidad termica. El aspecto del

  5. Reducción del Consumo Eléctrico y C0(2 mediante Sistemas de Ahorro y de Aislamiento Térmico aplicados a Viviendas en Zonas Áridas de México Electrical Consumption and C0(2 Reduction using Saving Systems and Thermal Insulation applied to Dwellings in Arid Lands of México

    Directory of Open Access Journals (Sweden)

    Roberto Calderón

    2011-01-01

    Full Text Available Se compara los consumos de energía de dos tipos de vivienda, eficiente e ineficiente, determinando su consumo eléctrico y reducción de C0(2, utilizando aislamiento térmico y sistemas de ahorro de energía. El estudio realizado mediante simulación se aplica a tres ciudades áridas de México: Mexicali, Ciudad Obregón y Hermosillo. De la vivienda ineficiente evaluada en las tres ciudades, Mexicali, registró los índices más altos con 7.014 kWh/año, impactando directamente sobre el ingreso familiar, los rangos de confort y la calidad de vida del usuario, además de aportar una cantidad de 4.88 toneladas de emisiones de C0(2 por vivienda al año. Estos indicadores pueden llegar a reducirse en entre el 40 y 50% si la vivienda es eficiente.The energy consumption of two types of dwellings, efficient and inefficient, are analyzed and compared, determining the electrical consumption and C0(2 reduction, utilizing thermal insulation and saving-energy options. The study done by simulation was applied in three arid áreas in México: Mexicali, Baja Obregón and Hermosillo. The results indícate that Mexicali presented the highest consumptions rates with 7.104 kWh/year, affecting directly the family household income, thermal comfort and life quality, besides providing 4.88 tons of C0(2 emission per house per year. These indexes can be reduced by 40 and 50% if the house is efficient.

  6. Designing for Design Activity

    OpenAIRE

    Kang, Sunghyun

    2009-01-01

    The area of graphic design has expanded since digital media was introduced, and it requires new creative thinking skills in the design process. This paper proposes a design process for a graphic design graduate class using activity theory as a theoretical background. This design process consists of three phases to solve the design problems within diverse design projects. Each phase was examined in terms of how the elements of activity theory could apply to the design process. As a research me...

  7. Analysis of the potencial of natural illumination for the savings and efficient use of the energy in buildings located in hot climates; Analisis del potencial de la iluminacion natural para ahorro y uso eficiente de la energia en las edificaciones en climas calidos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J. R. [Universidad Autonoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Departamento de Medio Ambiente, (Mexico)

    1997-12-31

    consumos de energia electrica para alumbrado de espacios interiores son muy cuantiosas, sobre todo en edificios no habitacionales. En este trabajo se exploran y presentan las posibilidades de la luz natural diurna para lograr ahorro de energia y confort visual termolumnico en las edificaciones.

  8. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...... Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...

  9. Designing Material Materialising Design

    DEFF Research Database (Denmark)

    Nicholas, Paul

    2013-01-01

    Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

  10. Caja de Ahorros Municipal de Essen. Alemania Federal

    Directory of Open Access Journals (Sweden)

    Köllges, Hans

    1977-05-01

    Full Text Available Ten-story building on a slope, with following distribution: tellers desks, offices and administrative departments, reserved and rental space, a cafeteria, meeting room, installation rooms and a swimming pool with its corresponding services, located on the top of the building. It also has five basements for supplies, storage and garage. The site is surrounded on all four sides with streets on different levels which permit various entrances and different vertical Communications between floors, which results in an optimum relationship between the passage surface and the usable space, taking full advantage of the space available. The concrete structure, with 8.30 m reticule on the sides, provides sufficient flexibility for adapting the different floors to the different operation schemes. The building offers a special architectural interest as a result of the offset in the upper floors and the contrast achieved in treating the facades, where the dark aluminum of the offices floors is broken by the bodies jutting out of the stairwells and elevators, treated with artificial white stone. The building is topped with a roof made of inclined facing on the last floor, also treated with dark aluminum panels.Este edificio consta de diez plantas sobre rasante, en fas que se distribuyen: una sala de cajas, oficinas y departamentos administrativos, espacios de reserva y alquiler, una cafetería, salón de actos, cuartos de instalaciones, y una piscina, con sus correspondientes servicios, montada en el remate de la edificación. Asimismo cuenta con cinco sótanos destinados a abastecimientos, almacén y garaje. La parcela se halla delimitada en sus cuatro costados por redes viarias a distinto nivel, que permiten la existencia de diversos accesos exteriores, así como distintos núcleos de comunicación vertical entre plantas, de donde resulta una óptima relación entre las superficies de circulación y las útiles, aprovechándose plenamente los espacios. La estructura de hormigón, resuelta con una retícula de 8,30 m de lado, proporciona suficiente flexibilidad a las plantas para la adaptación de distintos esquemas de funcionamiento. El conjunto ofrece un especial interés arquitectónico, debido al retranqueo de las plantas superiores y al contraste logrado en el tratamiento de las fachadas, donde el aluminio oscuro de las plantas de oficinas es interrumpido por los cuerpos salientes de las cajas de escaleras y ascensores, tratados en piedra artificial blanca. El edificio está coronado por una cubierta constituida por los paramentos inclinados de la última planta, tratada, igualmente, con paneles de aluminio oscurecido.

  11. Aislamiento, bienestar y ahorro de energía

    Directory of Open Access Journals (Sweden)

    García Arroyo, A.

    1976-03-01

    Full Text Available The continous appearance of new materials, the general tendency towards lighter structural charges, the increased personal welfare levels, the extended use of mechanical equipments for environmental conditioning in most of the housings presently being constructed, and the incessant and considerable increase of the organic fuel costs have given rise to a new study, both in scope and precision, of the physical and construction basis of the fundamental problems of living spaces. Here the study of the installations deals with arrangements suitable for carrying out the architectural projects of the construction elements, in order to obtain their maximum efficiency, as regulators of the negative environmental influences. As already announced previously, this is the second of three articles published in three consecutive issues of INFORMES DE LA CONSTRUCCIÓN.La continua aparición de nuevos materiales, la tendencia general al aligeramiento de las cargas estructurales, el incremento de los niveles individuales de bienestar, la extensión de los equipos mecánicos de acondicionamiento ambiental a la mayoría de las viviendas actualmente en construcción, y el ininterrumpido y sustancial crecimiento en los costos de los combustibles orgánicos, han dado lugar al replanteamiento, en extensión y profundidad, de las bases físico-constructivas en las que descansa la problemática funcional de los recintos habitacionales. Se aborda aquí el estudio de las disposiciones constructivas idóneas para la práctica de los proyectos arquitecturales de los diferentes elementos constructivos, a fin de obtener su máxima funcionalidad como reguladores de las solicitaciones ambientales perturbadoras del bienestar. Como ya se advirtió, éste es el segundo artículo de la serie de tres que aparecen en 3 números sucesivos de INFORMES DE LA CONSTRUCCIÓN.

  12. Aislamiento, bienestar y ahorro de energía

    Directory of Open Access Journals (Sweden)

    García Arroyo, Arturo

    1976-04-01

    Full Text Available The continuous appearance of new materials, the general tendency towards lighter structural loads, the increased personal welfare levels, the extended use of mechanical equipments for environmental conditioning in most of the housings presently being constructed, and the incessant and considerable increase of the organic fuel costs have given rise to a new study, both in scope and precision, of the physical and construction basis of the fundamental problems of living spaces. A comparative study is here carried out of the existing national and foreign Norms on the hygrothermal requirements that the members, and the spaces they form, have to comply with, so as to obtain comfort within the budget limits of an effective economy. As already mentioned, this is the last one of three articles published in consecutive issues of INFORMES DE LA CONSTRUCCIÓN.La continua aparición de nuevos materiales, la tendencia general al aligeramiento de las cargas estructurales, el incremento de los niveles individuales de bienestar, la extensión de los equipos mecánicos de acondicionamiento ambiental a la mayoría de las viviendas actualmente en construcción, y el ininterrumpido y sustancial crecimiento en los costos de los combustibles orgánicos, han dado lugar al replanteamiento, en extensión y profundidad, de las bases físico-constructivas en las que descansa la problemática funcional de los recintos habitacionales. Se aborda aquí el estudio comparado de la reglamentación existente, nacional y extranjera, de las necesidades higrotérmicas que han de cumplir los elementos y los recintos que éstos delimitan, para la consecución del confort, dentro de los presupuestos de una efectiva economía. Como ya se advirtió, éste es el último artículo de la serie de tres que han aparecido en números sucesivos de INFORMES DE LA CONSTRUCCIÓN.

  13. Aislamiento, bienestar y ahorro de energía

    Directory of Open Access Journals (Sweden)

    García Arroyo, A.

    1976-02-01

    Full Text Available The continous appearance of new materials, the general tendency towards lighter structural charges, the increased personal welfare levels, tile extended use of mechanical equipments for environmental conditioning in most of the housings presently being constructed, and the incessant and considerable increase of the organic fuel costs have given rise to a new study, both in scope and precision, of the physical and construction basis of the fundamental problems of living spaces. In addition to the financial and engineering aspects of the separate installations the problem is here approached through three different angles: I. Analysis of the thermophysical characteristics of the materials and structural elements that define and quantify the insulating capacity of these. II. Constructive arrangements suitable for carrying out the architectural projects of the construction elements, in order to obtain their maximum efficiency, as regulators of the negative environmental influences. III. A relative study of existing national and foreign regulations of the hygrothermal needs that the elements and structural spaces must meet to achieve the required comfort within the envisaged budget. Each of the above mentioned items will be dealt with in this Journal from this number onwards.La continua aparición de nuevos materiales, la tendencia general al aligeramiento de las cargas estructurales, el incremento de los niveles individuales de bienestar, la extensión de los equipos mecánicos de acondicionamiento ambiental a la mayoría de las viviendas actualmente en construcción, y e! ininterrumpido y sustancial crecimiento en los costos de los combustibles orgánicos, han dado lugar al replanteamiento, en extensión y profundidad, de las bases físico-constructivas en las que descansa la problemática funcional de los recintos habitacionales. Consideraciones financieras o de ingeniería de las instalaciones aparte, se aborda aquí el estudio del problema a través de tres aspectos diferentes: I. Análisis de las propiedades termofísicas de los materiales y los elementos estructurales que definen y cuantifican la capacidad aislante de los mismos. I I. Disposiciones constructivas idóneas para la práctica de los proyectos arquitecturales de los diferentes elementos constructivos, a fin de obtener su máxima funcionalidad como reguladores de las solicitaciones ambientales perturbadoras del bienestar. I I I. Estudio comparado de la reglamentación existente, nacional y extranjera, de las necesidades higrotérmicas que han de cumplir los elementos y los recintos que éstos delimitan, para la consecución del confort, dentro de los presupuestos de una efectiva economía. A partir de este número, y sucesivamente, aparecerán desarrollados en esta revista cada uno de los puntos más arriba señalados.

  14. Prompting Designers to Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2006-01-01

    Recent research suggest that engineering designers need assistance to understand what information is relevant for their particular design problem. They require guidance in formulating their queries and also to understand what information is relevant for them. This paper presents an approach to...... prompt designers with their design queries. A method that automatically extracts relationships between concepts is described, along with some examples. The method can be implemented as part of knowledge management system and the relationships are extracted form documents that are indexed within the...... system. The distinctive features of this approach is that all the concepts are elicited from the minds of engineering designers, and the system builds up knowledge as more documents enter the system. The approach is based on an understanding obtained from a number of empirical studies and also from...

  15. Prompting Designers to Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2007-01-01

    to prompt designers with their design queries. A method that automatically extracts relationships between concepts is described, along with some examples. The method can be implemented as part of knowledge management system and the relationships are extracted form documents that are indexed within...... the system. The distinctive features of this approach is that all the concepts are elicited from the minds of engineering designers, and the system builds up knowledge as more documents enter the system. The approach is based on an understanding obtained from a number of empirical studies and also from...

  16. Dansk Design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    2006-01-01

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  17. Energy saving based on the reduction of losses in the transmission and distribution of the power generated incrementing the transmission capacities by means of the use of direct current; Ahorro de energia basado en la reduccion de perdidas en la transmision y redistribucion de la generacion al ampliar las capacidades de transmision por medio del empleo de la transmision en corriente directa

    Energy Technology Data Exchange (ETDEWEB)

    Meraz Ateca, E.; Alanis Rodriguez, J.P.; Salinas Barrera, H.; Arechiga Rodriguez, L.D.; Guerrero Garza, J.J. [Comision Federal de Electricidad (CFE) (Mexico)

    1995-12-31

    alternating current terminal is recovered from the power lines and there will not be generation restrictions because of the unavailability of alternating current power lines; the achieved reliability is not evaluated, but it will be another benefit. The other option proposed for the project of utilization of power lines with direct current, consists in modifying or using the tie that will be constructed for the Rio Escondido Thermal Electric Station to the Northern Zone and that will operate in parallel with the alternating current network. This project provides the benefits of saving losses of about 20 MW. It is also achieved the increase in effective transmission capacity towards the Northern Zone, due to the fact that it will be Also available a controlled power mean, which facilitates the dispatch functions and re-distribution of power flows in the alternating current network. This tie is proposed of 500 MW operating in bi-polar form at least of 400 KV and reaching up to the Chihuahua Zone, allowing besides the re-dispatching of units to the Northern Zone in counting with greater capacity of effective transmission. The saving in re-dispatching could be significative; additionally, this tie will free transmission capacity from the Coal Power Stations towards the Monterrey Zone. This paper does not get deeper into the advantages regarding the dynamic behavior of the electric system in operating these ties in direct current, but they are not less important, since they can contribute with great benefits to the system during disturbance or emergency conditions. [Espanol] El presenta trabajo propone el empleo de la tecnologia de transmision en corriente directa, que proporciona un ahorro de perdidas de orden del 50% al transmitir la misma cantidad de potencia que la linea energizada en corriente alterna, asi como el contar con una mayor capacidad de transmision, dado que la limitante en la linea trabajando en corriente directa esta dada por su capacidad termica. El aspecto del

  18. Climate change and thermal bioclimate in cities: impacts and options for adaptation in Freiburg, Germany.

    Science.gov (United States)

    Matzarakis, Andreas; Endler, Christina

    2010-07-01

    The concept of physiologically equivalent temperature (PET) has been applied to the analysis of thermal bioclimatic conditions in Freiburg, Germany, to show if days with extreme bioclimatic conditions will change and how extreme thermal conditions can be modified by changes in mean radiant temperature and wind speed. The results show that there will be an increase of days with heat stress (PET > 35 degrees C) in the order of 5% (from 9.2% for 1961-1990) and a decrease of days with cold stress (PET < 0 degrees C) from 16.4% to 3.8% per year. The conditions can be modified by measures modifying radiation and wind speed in the order of more than 10% of days per year by reducing global radiation in complex structures or urban areas.

  19. Bioclimate and reproductive potential at the cold limit of European deciduous tree species

    OpenAIRE

    Kollas, Chris

    2013-01-01

    This thesis assessed factors that contribute to the explantion of the upper elevational and latitudinal limits of European broad-leaved tree species by using a set of ecological analysis, including in situ temperature measurements, a transplant experiment and a survey of the reproductive cycle and demography at the species limits. The following key questions were answered in five chapters: Do the elevational thermal limits of broad-leaved tree species correspond to their latitudinal t...

  20. Fundamentos jurídicos de la vivienda bioclimàtica

    OpenAIRE

    Meseguer Penalva, María José

    2002-01-01

    El desarrollo sostenible (art. 2 Tratado de Ámsterdam de 1997) persigue la finalidad de la calidad de vida del ser humano (Preámbulo y art. 45.2 Constitución Española) en su dimensión intra e inter generacional. La satisfacción de estas nuevas dimensiones sólo puede lograrse con un desarrollo humano que mantenga en continuo equilibrio dinámico la interrelación sistémica de los parámetros medioambiental, socio-económico y cultural. Ello significa, tal y como pretende esta tesis doctoral, que c...

  1. Reacondicionamiento bioclimático de viviendas de segunda residencia en clima mediterráneo.

    OpenAIRE

    Simancas Yovane, Katia

    2003-01-01

    El problema en el presente trabajo ha sido abordado desde distintos ángulos. En primer lugar con relación a la repercusión de la construcción masiva de viviendas en la expansión de la ciudad y en el elevado consumo energético. En segundo lugar, con respecto a la construcción de edificaciones que no responden ambientalmente a las condiciones del lugar, por lo que sus usuarios terminan introduciendo sistemas artificiales de control ambiental, como sistemas de calefacción y aire acondicionado qu...

  2. Urban bioclimate and comfort assessment in the African city of Praia (Cape Verde)

    OpenAIRE

    Lopes, António; Correia, Ezequiel; Nascimento, Judite M.; Canário, Paulo

    2015-01-01

    The population of Praia (Ilha de Santiago/Cape Verde) has recently increasedfrom 90,000 inhabitants in 2000 to 132,300 in 2012. Located in the southern part of the SantiagoIsland, the city has an average temperature of 22ºC and high values of humidity.The hot andrainy season occurs between July and October. According to the Cape Verde “National ClimateChange Adaptation” report, the temperatures increased about 1ºC in the last 15 years andscenariosindicate an annual warming between 0.7ºC and 2...

  3. VLSI design

    CERN Document Server

    Chandrasetty, Vikram Arkalgud

    2011-01-01

    This book provides insight into the practical design of VLSI circuits. It is aimed at novice VLSI designers and other enthusiasts who would like to understand VLSI design flows. Coverage includes key concepts in CMOS digital design, design of DSP and communication blocks on FPGAs, ASIC front end and physical design, and analog and mixed signal design. The approach is designed to focus on practical implementation of key elements of the VLSI design process, in order to make the topic accessible to novices. The design concepts are demonstrated using software from Mathworks, Xilinx, Mentor Graphic

  4. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Kjærsgaard, Mette Gislev

    2015-01-01

    This focus section explores the opportunities of design anthropology in participatory design as an approach to research and design in an increasingly global and digital world. Traditionally, ethnography has been used in Participatory design to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to addressing societal challenges and change, and a way for anthropologists and designers to engage in participatory research and design that extend beyond the empirical....

  5. Design theory versus architectural design

    OpenAIRE

    W R Spillers

    1986-01-01

    This paper is an attempt to track the path of architectural design both on design-theoretical and on practical (computer-aided design) planes. It begins with the practical problems of design which can be couched in terms of mathematical programming problems. The potential for applications of artificial intelligence and knowledge-based systems in architectural design is then considered. Last the place of architectural design within design theory is discussed.

  6. Research Design and Statistical Design.

    Science.gov (United States)

    Szymanski, Edna Mora

    1993-01-01

    Presents fourth editorial in series, this one describing research design and explaining its relationship to statistical design. Research design, validity, and research approaches are examined, quantitative research designs and hypothesis testing are described, and control and statistical designs are discussed. Concludes with section on the art of…

  7. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Gislev Kjærsgaard, Mette

    2014-01-01

    In this workshop we explore the opportunities of ethnography and design anthropology in Participatory Design (PD) as an approach to design in an increasingly global and digital world. Traditionally, ethnography has been used in PD to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to societal challenges, and a way for anthropologists and designers to engage in design that extends beyond the empirical....

  8. Evidensbaseret design

    DEFF Research Database (Denmark)

    Pagh, Jesper

    2013-01-01

    Debatindlæg om evidensbaseret design, som argumenterer for at det dels er en gammeldags, modernistisk tilgang til design, dels ikke baserer sig på evidens.......Debatindlæg om evidensbaseret design, som argumenterer for at det dels er en gammeldags, modernistisk tilgang til design, dels ikke baserer sig på evidens....

  9. Design Games

    DEFF Research Database (Denmark)

    Johansson, Martin Wetterstrand

    2007-01-01

    In this paper design games are discussed as an approach to managing design sessions. The focus is on the collaborative design session and more particular on how to set up the collaboration and reinsure progress. Design games have the advantage of framing the collaborative assignment at hand...

  10. FPGA design

    CERN Document Server

    Simpson, Philip

    2010-01-01

    This book describes best practices for successful FPGA design. It is the result of the author's meetings with hundreds of customers on the challenges facing each of their FPGA design teams. By gaining an understanding into their design environments, processes, what works and what does not work, key areas of concern in implementing system designs have been identified and a recommended design methodology to overcome these challenges has been developed. This book's content has a strong focus on design teams that are spread across sites. The goal being to increase the productivity of FPGA design t

  11. Design Accountability

    DEFF Research Database (Denmark)

    Koskinen, Ilpo; Krogh, Peter

    2015-01-01

    When design research builds on design practice, it may contribute to both theory and practice of design in ways richer than research that treats design as a topic. Such research, however, faces several tensions that it has to negotiate successfully in order not to lose its character as research....... This paper looks at constructive design research which takes the entanglement of theory and practice as its hallmark, and uses it as a test case in exploring how design researchers can work with theory, methodology, and practice without losing their identity as design researchers. The crux of practice based...

  12. VLSI design

    CERN Document Server

    Basu, D K

    2014-01-01

    Very Large Scale Integrated Circuits (VLSI) design has moved from costly curiosity to an everyday necessity, especially with the proliferated applications of embedded computing devices in communications, entertainment and household gadgets. As a result, more and more knowledge on various aspects of VLSI design technologies is becoming a necessity for the engineering/technology students of various disciplines. With this goal in mind the course material of this book has been designed to cover the various fundamental aspects of VLSI design, like Categorization and comparison between various technologies used for VLSI design Basic fabrication processes involved in VLSI design Design of MOS, CMOS and Bi CMOS circuits used in VLSI Structured design of VLSI Introduction to VHDL for VLSI design Automated design for placement and routing of VLSI systems VLSI testing and testability The various topics of the book have been discussed lucidly with analysis, when required, examples, figures and adequate analytical and the...

  13. Mechanical design

    CERN Document Server

    Risitano, Antonino

    2011-01-01

    METHODOLOGICAL STATEMENT OF ENGINEERING DESIGNApproaches to product design and developmentMechanical design and environmental requirementsPROPERTIES OF ENGINEERING MATERIALSMaterials for mechanical designCharacterization of metalsStress conditionsFatigue of materialsOptimum material selection in mechanical designDESIGN OF MECHANICAL COMPONENTS AND SYSTEMSFailure theoriesHertz theoryLubrificationShafts and bearingsSplines and keysSpringsFlexible machine elementsSpur gearsPress and shrink fitsPressure tubesCouplingsClutchesBrakes

  14. Design Compass

    DEFF Research Database (Denmark)

    Stokholm, Marianne Denise J.

    2006-01-01

    Design is moreover recognised as an important strategic tool in achieving competitive business´, products and services in a global market. As design becomes a more complex matter, due to a general increase in knowledge, requirements and internationalisation, more professions are involved...... in the design process. Managing design on all levels requires extended cooperation and communication on a firm ground. Cultural diversities are evident not only between different nationalities but also between different professions, resulting in communication problems. To overcome these barriers a common ground...... is needed. This paper describes a design concept, in line with the emerging understanding and use of design, and presents a simple tool for support of design management and cooperation in interdisciplinary and intercultural teams. The tool, named “Design Compass”, describes design, not as a profession...

  15. Memory design

    DEFF Research Database (Denmark)

    Tanderup, Sisse

    Mind and Matter - Nordik 2009 Conference for Art Historians Design Matters Contributed Memory design BACKGROUND My research concerns the use of memory categories in the designs by the companies Alessi and Georg Jensen. When Alessi's designers create their products, they are usually inspired...... by cultural forms, often specifically by the concept of memory in philosophy, sociology and psychology, while Danish design traditionally has been focusing on form and function with frequent references to the forms of nature. Alessi's motivation for investigating the concept of memory is that it adds...... a cultural dimension to the design objects, enabling the objects to make an identity-forming impact. Whether or not the concept of memory plays a significant role in Danish design has not yet been elucidated fully. TERMINOLOGY The concept of "memory design" refers to the idea that design carries...

  16. Design typology and design organisation

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Wognum, N.; McAloone, Timothy Charles

    2002-01-01

    of a design typology, we use a metaphoric picture of the design situation: "We design on dirty blackboards". The designer has always reusable patterns, which may be used as support, if we carefully do not wipe the blackboard clean. The false assumption in the current design models is, that the blackboards...... are clean. By assuming that, we also loose our possibility to explain how designing is possible. The core question concerning our typology is as follows: What is the set of views upon designing, we have to establish for obtaining a sufficient set of explanations? Or: What is the set of different theories...

  17. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  18. Design Anthropology

    DEFF Research Database (Denmark)

    Gunn, Wendy

    Design anthropology is a call for a different way of involving anthropology and participatory observation within practices of designing technologies, services, policies and infrastructure that does not aim towards changing human behavior. Here design is considered the process and not the object...... of inquiry. The paper presents a short history of design anthropology, its theoretical underpinnings and methodologies. Theoretically, the emerging field is influenced by processual, critical and action orientated approaches in anthropology. I argue that by combining anthropological methodology and knowledge...... with the future orientated imaginative praxis of design skill and collaborative design processes, anthropology and design could learn from each other. I conclude by referring to what theories, methods, and approaches are in use by practitioners of design anthropology....

  19. Danish design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    2001-01-01

    Hvordan dansk design bliver innovativt og verdensberømt igen som i storhedstiden i 1950- og 60'erne......Hvordan dansk design bliver innovativt og verdensberømt igen som i storhedstiden i 1950- og 60'erne...

  20. Research Design

    DEFF Research Database (Denmark)

    2017-01-01

    Gunnar Scott Reinbacher (editor) Antology.  Research Design : Validation in Social Sciences. Gunnar Scott Reinbacher: Introduction. Research design and validity. 15p Ole Riis: Creative Research design. 16 p Lennart Nørreklit: Validity in Research Design. 24p Gitte Sommer Harrits: Praxeological...... knowledge: An integrated strategy for combining "explaining" and "understanding". 22p Heidi Houlberg Salomonsen & Viola Burau: Comparative research designs. 40p Rasmus Antoft & Heidi Houlberg Salomonsen: Studying organizations by a Pragmatic Research Design: the case of qualitative case study  designs. 31p...... Kenneth Mølbjerg Jørgensen: Research as storrytelling: constructing reflexive research practice. 21p Lars Ole Bonde: Reflections on the relationship between research questions, design and methods in the research project "Receptive music therapy with female cancer patients in rehabilitation. 35p Gunnar...

  1. Design Education

    DEFF Research Database (Denmark)

    Brandt, Eva

    2007-01-01

    traditions into a research based institution for higher education is demanding. Danmarks Designskole is in the middle of this process, many activities are initiated, both employees and students are involved, and from outside representatives from various design professions. The design process has many...... stakeholders with various interests and opinions. The aim it is not to design a computer system, a service or product but re-designing curriculum, work procedures, self images etc. which support educating designers of the future. This paper reports on two investigations that have been carried through as part...... of the change processes at Danmarks Designskole. A questionnaire explore the present students reasons for wanting to become designers and their expectations to the design education and future jobs. Eight focus groups including representatives from various design professions discuss what skills and competencies...

  2. Designing motivation

    DEFF Research Database (Denmark)

    How can products be designed to change our habits for the better? What is some of the leading research that designers can draw on to create new systems that motivate people towards healthier behaviour? Designing Motivation is an edited collection of ‘industrialist cheat sheets’: 22 single......-page summaries of research articles relating to technology design, motivation, and behaviour change. Ranging across the fields of economics, sociology, design research and behavioural science, each summary draws out the design implications of the research. It is intended as a resource for designers who...... are grappling with how to create motivating products, and as a primer for students who want a brief introduction to some of the relevant theories, findings and design interventions in these fields. The editor's introduction raises a number of issues encountered when we try to apply behavioural research...

  3. Automotive Design

    Science.gov (United States)

    1991-01-01

    Analytical Design Service Corporation, Ann Arbor, MI, used NASTRAN (a NASA Structural Analysis program that analyzes a design and predicts how parts will perform) in tests of transmissions, engine cooling systems, internal engine parts, and body components. They also use it to design future automobiles. Analytical software can save millions by allowing computer simulated analysis of performance even before prototypes are built.

  4. Design Processes

    DEFF Research Database (Denmark)

    Ovesen, Nis

    2009-01-01

    Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through intervie...

  5. Designing pathways

    DEFF Research Database (Denmark)

    Scheuer, John Damm

    2010-01-01

    The theoretical background in this chapter is organizational studies and especially theories about design and design processes in organizations. The concept of design is defined as a particular kind of work aimed at making arrangements in order to change existing situations into desired ones...

  6. Mechatronic design

    NARCIS (Netherlands)

    Amerongen, van Job

    2003-01-01

    Mechatronic design is the integrated design of a mechanical system and its embedded control system. In order to make proper choices early in the design stage, tools are required that support modelling and simulation of physical systems––together with the controllers––with parameters that are directl

  7. Design and analysis of an intelligent public FV lighting system; Diseno y analisis de un alumbrado publico FV inteligente

    Energy Technology Data Exchange (ETDEWEB)

    Hanessian D, Ana V.; Gordon, Manuel [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)

    2009-07-01

    In the Mexico's National Energy Balance of 2008, it is considered that of the total of the electrical power consumption in our country, 18% is dedicated to lighting. Conscious of the necessity of saving energy in public lighting in this article is presented the design, construction and analysis of the power consumption of a public light fed with electricity of photovoltaic cells and the control of intensity on the light in inverse way of the natural light. A lamp constructed based in light emitting diodes (LEDs) is used. This has the quality of consuming very little energy that could be provided by the sun and be stored to use it at night. With this system, proven at scale, energy savings are obtained superior to 50% of the conventional one and, in relation to the commercial photovoltaic (FV) luminaries up to 30%. [Spanish] Del Balance Nacional de Energia, de Mexico, de 2008, se considera que del total del consumo de energia electrica en nuestro pais, el 18% esta dedicado a la iluminacion. Conscientes de la necesidad de ahorrar energia en alumbrado publico, en este articulo se presenta el diseno de construccion y analisis del consumo energetico de una luminaria publica alimentada con electricidad de celdas fotovoltaicas y el control de intensidad de la luz de manera inversa a la luz natural. Se utiliza un foco construido a base a los diodos emisores de luz (LEDs, por sus siglas en ingles). Estos tienen la cualidad de consumir muy poca energia que podra ser suministrada por el sol y almacenada para utilizarla en la noche. Con este sistema, probado a escala, se logran ahorros de energia superiores al 50% del convencional y, en relacion a las luminarias fotovoltaicas (FV) comerciales, hasa el 30%.

  8. Conceptual design

    International Nuclear Information System (INIS)

    This report documents the TFE Conceptual Design, which provided the design guidance for the TFE Verification program. The primary goals of this design effort were: (1) establish the conceptual design of an in-core thermionic reactor for a 2 Mw(e) space nuclear power system with a 7-year operating lifetime; (2) demonstrate scalability of the above concept over the output power range of 500 kW(e) to 5 MW(e); and (3) define the TFE which is the basis for the 2 MW (e) reactor design. This TFE specification provided the basis for the test program. These primary goals were achieved. The technical approach taking in the conceptual design effort is discussed in Section 2, and the results are discussed in Section 3. The remainder of this introduction draws a perspective on the role that this conceptual design task played in the TFE Verification Program

  9. Design Research

    DEFF Research Database (Denmark)

    aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits......Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

  10. Design Research

    DEFF Research Database (Denmark)

    Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

  11. Design spaces

    DEFF Research Database (Denmark)

    2005-01-01

    alternatives for integrating digital technology with space. Connecting practical design work with conceptual development and theorizing, art with technology, and usesr-centered methods with social sciences, Design Spaces provides a useful research paradigm for designing ubiquitous computing. This book......Digital technologies and media are becoming increasingly embodied and entangled in the spaces and places at work and at home. However, our material environment is more than a geometric abstractions of space: it contains familiar places, social arenas for human action. For designers, the integration...... of digital technology with space poses new challenges that call for new approaches. Creative alternatives to traditional systems methodologies are called for when designers use digital media to create new possibilities for action in space. Design Spaces explores how design and media art can provide creative...

  12. Business design or Creative design

    DEFF Research Database (Denmark)

    Sørensen, Suna; Lassen, Astrid Heidemann; Nielsen, Louise Møller

    2008-01-01

    is a rudimentary effort to fill this box. Since opportunity design is a creative process, ideas from the creative design industries and literature are brought in to suggest a framework to explain how opportunities intentionally and pro-actively can be designed. This framework is indeed valuable to support......Business design is about turning good ideas into future business, but it requires a great entrepreneurial opportunity to be exploited via a valid strategic and organizational design. The literature says much about how entrepreneurs design strategies and organizations, but how do they design...... an opportunity? So far, the literature has highly relied on the concept of alertness, which implies to notice without deliberate creation of opportunities. Theories seldom describe how entrepreneurial opportunities purposely come into existence - the concept of "opportunity design" is a black box. The paper...

  13. ECO DESIGN IN DESIGN PROCESS

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2014-05-01

    Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

  14. Design culture and design education

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Bang, Anne Louise

    2014-01-01

    and services for a more sustainable future. This paper is based on a case from teaching fashion and textile students at Design School Kolding in Denmark, where we run different courses aiming at changing the profession. By moving the focus from the production phase to the use phase, the project seeks to create...... to change the education of future designers. This is an emerging field at a number of design schools across the world, among these Design School Kolding in Denmark. In this paper we understand and discuss design education as part of a cultural phenomenon. The aim of our research is to develop new dialogue...... tools for teaching fashion and textile students in order to stimulate new ways of thinking and engaging with users. By employing participatory design methods in the field of fashion and textiles, we seek to develop an alternative transformational strategy that may further the design of products...

  15. Integrated Design

    DEFF Research Database (Denmark)

    Jørgensen, Michael; Nielsen, M. W.; Strømann-Andersen, Jakob Bjørn

    2011-01-01

    This paper presents a case study of the implementation of integrated design in an actual architectural competition. The design process was carried out at a highly esteemed architectural office and attended by both engineers and architects working towards mutual goals of architectural excellence......, low-energy consumption, and high-quality indoor environment. We use this case study to investigate how technical knowledge about building performance can be integrated into the conceptual design stage. We have selected certain points during the design process that represented design challenges...... and describe the decision process. Specific attention is given to how the engineering input was presented and how it was able to facilitate the design development. Site and context, building shape, organization of functions and HVAC-systems were all included to obtain a complete picture of the building...

  16. Workspace Design

    DEFF Research Database (Denmark)

    Seim, Rikke

    arbejdspladsdesignprocesser i tre virksomheder tilhørende henholdsvis industri-, service- og sundhedssektoren. Ph.d.-projektet har belyst hvordan en medarbejderinvolverende designproces kan iscenesættes og faciliteres af arbejdsmiljøprofessionelle ved hjælp af kreative, visuelle metoder inspireret af Participatory Design......Arbejdsmiljø adresseres sjældent i den klassike tekniske tilgang til arbejdspladsdesign. Workspace Design konceptet er et alternativ tilgang til design eller re-design af arbejdspladser, baseret på en socio-teknisk systemforståelse, hvor hovedprincipperne er 1) transformation af...... arbejdsmiljørådgiveren til facilitator af arbejdspladsdesignprocessen og 2) transformation af medarbejderne til co-designere af deres egen arbejdsplads. Dette ph.d.-projekt er en del af Workspace Design forskningsprogrammet som har udviklet og testet Workspace Design konceptet og de tilhørende metoder ved intervention i...

  17. Opportunity Design

    DEFF Research Database (Denmark)

    Nielsen, Louise Møller; Lassen, Astrid Heidemann; Tollestrup, Christian;

    2012-01-01

    some of the specific approaches applicable to the design of opportunities. By looking at industrial designers working with entrepreneurial opportunities, it becomes evident that there is a set of approaches, which can turn the opportunity recognition process into an intentional and proactive process....... or development oriented, the act of ‘recognition’ is still a central part of the definition. Recently the term “Opportunity Design” has been introduced, suggesting that opportunities can be proactively and intentionally designed. However, the relatedness between the opportunity recognition process...... and opportunity design is not clear. Furthermore, there is still a lack of approaches, methods and tools, which can support entrepreneurs in designing the entrepreneurial opportunities. In this paper, we take steps towards defining opportunity design in respect to the opportunity recognition process, and identify...

  18. Cooperative design

    DEFF Research Database (Denmark)

    Schmidt, Kjeld

    1998-01-01

    In the contemporary world, engineers and designers face huge challenges as they shift towards novel organizational concepts such as ‘concurrent engineering’ in order to manage increasing product diversity so as to satisfy customer demands while trying to accelerate the design process to deal...... with the competitive realities of a global market and decreasing product life cycles. In this environment, the coordination and integration of the myriads of interdependent and yet distributed and concurrent design activities becomes enormously complex. It thus seems as if CSCW technologies may be indispensable...... if concurrent engineering is to succeed. On the basis of ethnographic studies of cooperative design, the paper attempts to characterize cooperative work in the domain of design and to outline a set of crucial research problems to be addressed if CSCW is to help engineers and de-signers meet the challenges...

  19. Designated Places

    Data.gov (United States)

    California Department of Resources — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  20. User design

    CERN Document Server

    Carr-Chellman, Alison A

    2012-01-01

    User Design offers a fresh perspective on how front-line learners (users) can participate in the design of learning environments. The author challenges the universal assumption that front-line users must be relegated to the role of offering input, and that the actual design activity of learning systems must still be conducted only by experts. The book presents a new set of methods and strategies that show how the tools of professional designers can be effectively shared with broad groups of users and other participants in the process of creating their own learning. Drawing

  1. Cryostat Design

    CERN Document Server

    Parma, V

    2014-01-01

    This paper aims to give non-expert engineers and scientists working in the domain of accelerators a general introduction to the main disciplines and technologies involved in the design and construction of accelerator cryostats. Far from being an exhaustive coverage of these topics, an attempt is made to provide simple design and calculation rules for a preliminary design of cryostats. Recurrent reference is made to the Large Hadron Collider magnet cryostats, as most of the material presented is taken from their design and construction at CERN.

  2. GENERAL DESIGNER

    OpenAIRE

    Парсаданов, И. В.

    2014-01-01

    Dedicated to the general designer for the average power engines I.A. Koval. The a-main steps and direction of design and research activities, the results achieved in the creation, research institutes and providing technical level diesel engines for agricultural machinery are given.

  3. Dark Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    2008; Vannini 2010). Empirically the paper breaches from the author’s own research into sky trains, metros, drones, and street design (e.g. Jensen 2013, 2014; Jensen & Lanng 2016) over secondary research into the social exclusion taking place by the design of infrastructure spaces and application...

  4. Japansk design

    DEFF Research Database (Denmark)

    Kural, René

    2005-01-01

    Artiklen udspringer af interviews med ti af Japans bedste møbeldesignere, grafikere, arkitekter og designfirmaer. Efter samtalerne var der tre træk ved japansk design, som trådte frem: god økonomi, fantasi og vovemod. Det bedste japanske design fusionerer vovemod med den unikke japanske kultur med...

  5. Integrated Design

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    1999-01-01

    A homepage on the internet with course material, lecture plan, student exercises, etc. Continuesly updated during the course Integrated Design (80402, 80403)......A homepage on the internet with course material, lecture plan, student exercises, etc. Continuesly updated during the course Integrated Design (80402, 80403)...

  6. Aircraft Design

    Science.gov (United States)

    Bowers, Albion H. (Inventor); Uden, Edward (Inventor)

    2016-01-01

    The present invention is an aircraft wing design that creates a bell shaped span load, which results in a negative induced drag (induced thrust) on the outer portion of the wing; such a design obviates the need for rudder control of an aircraft.

  7. Intelligent Design

    DEFF Research Database (Denmark)

    Hjorth, Poul G.

    2005-01-01

    Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig.......Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig....

  8. Opportunity Design

    DEFF Research Database (Denmark)

    Løwe Nielsen, Suna; Lassen, Astrid Heidemann; Nielsen, Louise Møller;

    2013-01-01

    design”. The framework explains how opportunities intentionally and pro-actively can be designed from methods and processes of moving-in and moving-out. An illustrative case of opportunity design within the area of sustainable energy and electric cars is presented to link the theoretical discussion...

  9. Design Dancing

    DEFF Research Database (Denmark)

    Denise J. Stokholm, Marianne

    2013-01-01

    In Creative cooperation and co-creation is often obstructed by different perception of design and innovation, inexperience in design and the lack of a common ground for dynamic interaction and tangible tools to support the creative process. This is a problem because it leads to miscommunication...

  10. Interior Design.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    This document contains teacher's materials for an eight-unit secondary education vocational home economics course on interior design. The units cover period styles of interiors, furniture and accessories, surface treatments and lighting, appliances and equipment, design and space planning in home and business settings, occupant needs, acquisition…

  11. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix; Wind, Simon

    2016-01-01

    In this paper, we identify the nexus between design (architecture, urban design, service design, etc.) and mobilities as a new and emerging research field. In this paper, we apply a “situational mobilities” perspective and take point of departure in the pragmatist question: “What design decisions...... and interventions affords this particular mobile situation?” The paper presents the contours of an emerging research agenda within mobilities research. The advent of “mobilities design” as an emerging research field points towards a critical interest in the material as well as practical consequences of contemporary......-making. The paper proposes that increased understanding of the material affordances facilitated through design provides important insight to planning and policymaking that at times might be in risk of becoming too detached from the everyday life of the mobile subject within contemporary mobilities landscapes....

  12. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  13. ARE INCLUSIVE DESIGNERS DESIGNING INCLUSIVELY?

    DEFF Research Database (Denmark)

    Herriott, Richard

    2013-01-01

    A large body of literature exists relating to Inclusive Design. The literature can be divided into theory concerning methodology and case studies concerning practice. With such a large body of theoretical literature available, the question arises as to how closely practice matches that theory....... This paper is a survey of the methods used in the execution of self-declared inclusively design products based on an analysis of academic papers, posters and oral presentations. The case studies are divided into two groups, product design and assistive technology. Design steps were assigned to six categories...

  14. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix

    Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the background of the ‘mobilities turn’ (e.g. Cresswell 2006, Urry 2007) this book articulates a new and emerging research field, namely that of ‘m...... enter into a fruitful relationship with mobilities research, offering a relational and mobile design thinking and a valuable base for a reflective design practice around the ubiquitous structures, spaces and systems of mobilities....... that of ‘mobilities design’. The book revolves around the following research question: How are design decisions and interventions staging mobilities? It builds upon the Staging Mobilities model (Jensen 2013) in an explorative inquiry into the problems and potentials of the design of mobilities. The exchange value...... between mobilities and design research is twofold. To mobilities research this means getting closer to the ‘material’, and to engage in the creative, explorative and experimental approaches of the design world which offer new potentials for innovative research. Design research, on the other hand, might...

  15. Design Research as Conceptual Designing

    DEFF Research Database (Denmark)

    Ylirisku, Salu; Jacucci, Giulio; Sellen, Abigail;

    2015-01-01

    The term ‘conceptual designing’ refers to an activity that various practitioners already undertake, but for which we lack a clear definition. This article provides that definition and uses an example of a design concept called ‘Manhattan’ to present how exactly this type of process happens. We...... that conceptual designing can be especially useful in research and design projects that bring different kinds of people, organizations, technologies and domains together into the forming of new well-founded proposals for development. The presentation of conceptual designing in this paper is written...... with an intention to provide designers and researchers with terminology and concepts that they may use to structure their work as well as to become more resourceful in reflecting upon their projects....

  16. Designed communities?

    DEFF Research Database (Denmark)

    Stender, Marie

    2013-01-01

    of these designed communities: What social life is promoted in such recent architectural visions? And to what extent can the social life and identity of a place actually be designed? The paper discusses these questions based on a fieldwork in three new housing complexes in the Copenhagen Region: The A-house...... by architect Carsten Holgaard, the 8-house by BIG, and Lange Eng (The Long Meadow) by Dorte Mandrup. Rather than taking the perspective of either architect or user, the fieldwork has ethnographically traced the entire process from design to occupancy. The aim is to explore how the social life and identity...... of a place is initially formed through the hands of architects, developers and estate agents, and further shaped and realized by residents, when taken into use. I suggest that by way of branding and iconic architecture these thoroughly designed environments reinforce the notion of residential space...

  17. Participatory Design

    DEFF Research Database (Denmark)

    Robertson, Toni; Simonsen, Jesper

    2012-01-01

    focus of later chapters. The target audience is identified, and the structure of the book explained. A short description of each chapter highlights its particular contributions as well as the associated challenges facing designers and researchers engaged in participatory approaches. The chapter......The aim of this book is to provide a current account of the commitments and contributions of research and practice in the Participatory Design of information technologies. An overview of the central concepts that have defined and shaped the field is provided as an introduction to the more detailed...... concludes with some guidance and recommendations for further reading. An introduction to Participatory Design is followed by explanations of how practitioners and researchers in the field understand participation and practice and how design is approached as a process driven by social interaction...

  18. Design Transformations

    DEFF Research Database (Denmark)

    Morrison, Ann; Knoche, Hendrik

    2014-01-01

    of material, working with real data and users at all stages of assessment and producing visualisations from evaluations, naturally forced student motivation to act and redesign better solutions. We noted improved attendance and students reported high engagement and content appreciation. Research limitations......Purpose – Taking a case study approach, we synchronised two courses to focus on the students working with learning and applying tools in the one course and acting on understandings gained to produce artefacts in the other. Design/methodology/approach – Working with real users throughout all stages...... of the design process, we structured two courses so findings from the evaluation methods learnt in the one course (their analyses) were directly acted on in the other (their re-designs). We fostered a group–spirited learning environment where students presented designs-in-process; explained the findings from...

  19. Design Anthropology

    DEFF Research Database (Denmark)

    This edited volume provides an introduction to the emerging field of design anthropology from the point of view of anthropologists engaging in its development. Contributors include young anthropologists with experience in the field and leading theoreticians, who combine to articulate the specific...... style of knowing involved in doing design anthropology. So far design anthropology has been developed mostly in the practice of industry and the public sector, in particular in Scandinavia and the US, and the sustained academic reflection to support this practice is still in its early stages. This book...... will contribute to this theoretical reflection and provide a reference for practitioners, teachers and students of anthropology, as well as design and innovation....

  20. Design junctions

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2012-01-01

    This article discusses the question: Are weak signals independent of framing and interactions with the environment? The response proposed here is that many of the developments identified by efforts to detect and interpret weak signals are the result of designed interventions that define...... given to weak signals are strongly influenced by design choices made at the outset. In this sense design is a constitutive element of both the environment and signal detection/use. An example of how design is constitutive of both context and understanding can be found in the history of hospital hygiene...... the repertoire of actions and frames. Very often, as Ansoff argued, actors use a variety of models and filters for seeking and using weak signals. Thus weak signals are not only dependent on the interpretative equipment applied by actors, but from a constructivist perspective the identification of and meaning...

  1. Mechanical design

    Science.gov (United States)

    1976-01-01

    Design concepts for a 1000 mw thermal stationary power plant employing the UF6 fueled gas core breeder reactor are examined. Three design combinations-gaseous UF6 core with a solid matrix blanket, gaseous UF6 core with a liquid blanket, and gaseous UF6 core with a circulating blanket were considered. Results show the gaseous UF6 core with a circulating blanket was best suited to the power plant concept.

  2. Designing gamification

    OpenAIRE

    Kuutti, J. (Julius)

    2013-01-01

    This research studies gamification: the use of game design elements in non-game contexts. Gamification is a new phenomenon that has not yet been studied extensively in academic papers. There is a significant research gap to be filled. The purpose of this research is to study how gamification can be used for the benefit of marketing. This is achieved by studying the design process of gamification, the special motivational factors behind gamification, and the game elements that constitute a gam...

  3. Ship Design

    Science.gov (United States)

    1982-01-01

    Guided missile cruiser equipped with advanced Aegis fleet defense system which automatically tracks hundreds of attacking aircraft or missiles, then fires and guides the ship's own weapons in response. Designed by Ingalls Shipbuilding for the US Navy, the U.S.S. Ticonderoga is the first of four CG-47 cruisers to be constructed. NASTRAN program was used previously in another Navy/Ingalls project involving design and construction of four DDG-993 Kidd Class guided missile destroyers.

  4. Tank design

    International Nuclear Information System (INIS)

    This paper reports that aboveground tanks can be designed with innovative changes to complement the environment. Tanks can be constructed to eliminate the vapor and odor emanating from their contents. Aboveground tanks are sometimes considered eyesores, and in some areas the landscaping has to be improved before they are tolerated. A more universal concern, however, is the vapor or odor that emanates from the tanks as a result of the materials being sorted. The assertive posture some segments of the public now take may eventually force legislatures to classify certain vapors as hazardous pollutants or simply health risks. In any case, responsibility will be leveled at the corporation and subsequent remedy could increase cost beyond preventive measures. The new approach to design and construction of aboveground tanks will forestall any panic which might be induced or perceived by environmentalists. Recently, actions by local authorities and complaining residents were sufficient to cause a corporation to curtail odorous emissions through a change in tank design. The tank design change eliminated the odor from fuel oil vapor thus removing the threat to the environment that the residents perceived. The design includes reinforcement to the tank structure and the addition of an adsorption section. This section allows the tanks to function without any limitation and their contents do not foul the environment. The vapor and odor control was completed successfully on 6,000,000 gallon capacity tanks

  5. Designing Mobilities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    Within the so-called ‘mobilities turn’ (Adey 2010; Cresswell 2006; Urry 2007) much research has taken place during the last decade bringing mobilities into the centre of sociological analysis. However, the materiality and spatiality of artefacts, infrastructures, and sites hosting mobilities...... are often still not engaged with in a sufficiently manner. Often social sciences keep distance to the physical and material as if the social was still to be understood as a realm separate of technology, architecture, and design (for a critique of this see; Latour 2005 and Urry 2000). This paper takes point...... of departure in the sociological perspective termed ‘Staging Mobilities’ (Jensen 2013a) and utilizes this as an analytical frame for exploring cases of mobility design. The paper put focus on how the material shape, design and architectures of technologies, spaces and sites influence mobilities practices...

  6. INFRASTRUCTURING DESIGN

    DEFF Research Database (Denmark)

    Ertner, Sara Marie

    The fact that the average citizen in Western societies is aging has significant implications for national welfare models. What some call ’the grey tsunami’ has resulted in suggestions for, and experiments in, re-designing healthcare systems and elderly care. In Denmark, one attempted solution...... to these challenges has been the development of welfare technologies and services. A range of projects is currently being initiated, all with the shared aim to create technological and social innovations for health care and elderly care. This PhD thesis focuses on practices of developing welfare technologies within...... one such project, Project Lev Vel, a public-private and user driven innovation project. The central questions posed by the dissertation are: What is welfare technology? How is it imagined, designed, and developed, and by whom? Who are driving the design processes and how? Who are the elderly users...

  7. Designed Places

    DEFF Research Database (Denmark)

    Stender, Marie

    The 2008 financial crisis has left traces in the built environment of Copenhagen like many other places: Building projects are left unfinished or their function or finish is changed due to new economic circumstances. An ethnographic exploration of these traces exposes central aspects of what...... like the forces of nature. Based on a fieldwork in three new housing developments in Copenhagen, this paper aims to bring the financial crisis ‘down to earth’ by examining the material shapes it has taken in the spaces of everyday life. The ethnographic cases in question are places that are somewhat...... over-designed: Not only the places’ architecture and built environment but also their identity, image and social life has been carefully planned for. At the same time their design and architectural layout bear witness to a seemingly longing for that which is unplanned and beyond design, thus staging...

  8. Design thinking.

    Science.gov (United States)

    Brown, Tim

    2008-06-01

    In the past, design has most often occurred fairly far downstream in the development process and has focused on making new products aesthetically attractive or enhancing brand perception through smart, evocative advertising. Today, as innovation's terrain expands to encompass human-centered processes and services as well as products, companies are asking designers to create ideas rather than to simply dress them up. Brown, the CEO and president of the innovation and design firm IDEO, is a leading proponent of design thinking--a method of meeting people's needs and desires in a technologically feasible and strategically viable way. In this article he offers several intriguing examples of the discipline at work. One involves a collaboration between frontline employees from health care provider Kaiser Permanente and Brown's firm to reengineer nursing-staff shift changes at four Kaiser hospitals. Close observation of actual shift changes, combined with brainstorming and rapid prototyping, produced new procedures and software that radically streamlined information exchange between shifts. The result was more time for nursing, better-informed patient care, and a happier nursing staff. Another involves the Japanese bicycle components manufacturer Shimano, which worked with IDEO to learn why 90% of American adults don't ride bikes. The interdisciplinary project team discovered that intimidating retail experiences, the complexity and cost of sophisticated bikes, and the danger of cycling on heavily trafficked roads had overshadowed people's happy memories of childhood biking. So the team created a brand concept--"Coasting"--to describe a whole new category of biking and developed new in-store retailing strategies, a public relations campaign to identify safe places to cycle, and a reference design to inspire designers at the companies that went on to manufacture Coasting bikes. PMID:18605031

  9. Design & Innovation

    DEFF Research Database (Denmark)

    Boelskifte, Per; Jørgensen, Ulrik

    2005-01-01

    The new design and innovation programme at DTU is challenging some of the standard concepts dominating most engineering educations. The programme, its background, context and basic educational ideas are presented and discussed in this paper. To build competences that match the need for innovative...... and design oriented engineers in industry and society has turned out to challenge a number of the standard – and often taken for granted – concepts in engineering education still dominated world wide by rather strict norms and concepts of learning that do not challenge the students creativity and innovative...

  10. VLSI design

    CERN Document Server

    Einspruch, Norman G

    1986-01-01

    VLSI Electronics Microstructure Science, Volume 14: VLSI Design presents a comprehensive exposition and assessment of the developments and trends in VLSI (Very Large Scale Integration) electronics. This volume covers topics that range from microscopic aspects of materials behavior and device performance to the comprehension of VLSI in systems applications. Each article is prepared by a recognized authority. The subjects discussed in this book include VLSI processor design methodology; the RISC (Reduced Instruction Set Computer); the VLSI testing program; silicon compilers for VLSI; and special

  11. Lighting Design

    DEFF Research Database (Denmark)

    Hansen, Ellen Kathrine; Mullins, Michael

    2014-01-01

    Light as a multi-dimensional design element has fundamental importance for a sustainable environment. The paper discusses the need for an integration of scientific, technical and creative approaches to light and presents theory, methods and applications toward fulfilling this need. A theory...... of design developed from three experiments show how distinct qualitative and quantitative criteria in different disciplinary traditions can be integrated successfully, despite disparate technical/scientific, social scientific and art/humanities backgrounds. The model is applied to a pedagogical curriculum...

  12. Pyroshock design

    Science.gov (United States)

    Piersol, Allan G.

    2002-05-01

    The structural response velocities produced by pyroshocks are usually too low to cause structural damage beyond the immediate region of the pyrotechnic device where damage is intended. On the other hand, pyroshocks can cause malfunctions of equipment mounted near the pyrotechnic device, particularly equipment containing microelectronic or ceramic elements. These malfunctions are usually the result of the high frequency content (above 2 kHz) of pyroshocks, and are difficult to design against using conventional analysis procedures. On the other hand, adherence to simple design guidelines, which are summarized, can substantially suppress pyroshock-induced failures of equipment.

  13. Designing Clean

    DEFF Research Database (Denmark)

    Koch, Christian; Haubjerg, Esben Lundsgaard

    2011-01-01

    Consulting Engineers and Architects riding on the climate mitigation wave, are currently experimenting with the concept of “Integrated Design Process” (IDP). This paper views “Integrated Design Process” along with other management or organisational concepts, seeing them as less of systematic...... perception of main actors, the role of information technology, the relation to lean, and forms of collaboration. Furthermore the focus of the variants differ (industry, organizational or project level).The paper discusses case studies of four teams of engineers and architects. It is argued that there exists...

  14. Políticas Tributarias y Ahorro de las Empresas Políticas Tributarias y Ahorro de las Empresas

    Directory of Open Access Journals (Sweden)

    Alejandro Jara

    1997-03-01

    Full Text Available The purpose of the paper is to analyze firms decisions about using profits as a financing source. In particular, we are interested in the consequence of changes of tax incentives on that behavior, Following a revision of theoretical aspects of saving behavior of firms, we analyze how tax variables affect internal and/or external financing decisions of firms. From empirical estimations, we can elude that the theory of capitalization of taxes, which states that the cost of capital is the transmission mechanism of tax changes, is not verified during the analyzed period, Indeed, the cost of capital, that aflects negatively the reinvestment profit rate, does not appear to be a significant variable of the model. On the other hand, from the traditional theory perspective, in which the dividend policy follows a long run objective, we conclude that profits together with tax incentives Oil dividend payments, in particular during profit periods, are relevant in financing decisions of firms. The purpose of the paper is to analyze firms decisions about using profits as a financing source. In particular, we are interested in the consequence of changes of tax incentives on that behavior, Following a revision of theoretical aspects of saving behavior of firms, we analyze how tax variables affect internal and/or external financing decisions of firms. From empirical estimations, we can elude that the theory of capitalization of taxes, which states that the cost of capital is the transmission mechanism of tax changes, is not verified during the analyzed period, Indeed, the cost of capital, that aflects negatively the reinvestment profit rate, does not appear to be a significant variable of the model. On the other hand, from the traditional theory perspective, in which the dividend policy follows a long run objective, we conclude that profits together with tax incentives Oil dividend payments, in particular during profit periods, are relevant in financing decisions of firms.

  15. Designing Organizations

    DEFF Research Database (Denmark)

    DESIGNING ORGANIZATIONS: 21st Century Approaches er en vigtig publikation inden for organisationsdesign. Fokus ligger på nye udviklinger inden for organisationsdesign og bogen hjælper med at skabe mere reflekterende forskining og stærkere empiriske analyser inden for dette vigtige felt inden...

  16. Designer Couple

    Institute of Scientific and Technical Information of China (English)

    MARK CRAHAM

    2008-01-01

    @@ From running a small architecture practice in the US to overseeing some of China's most prestigious design projects, as well as a hugely successful homeware store,husband-and-wife team Lyndon Neri and Rossana Hu have come a long way in a very short space of time.

  17. Collaborative Design

    Science.gov (United States)

    Broderick, Debora

    2014-01-01

    This practitioner research study investigates the power of multimodal texts within a real-world context and argues that a participatory culture focused on literary arts offers marginalized high school students opportunities for collaborative design and authoring. Additionally, this article invites educators to rethink the at-risk label. This…

  18. Sample Design.

    Science.gov (United States)

    Ross, Kenneth N.

    1987-01-01

    This article considers various kinds of probability and non-probability samples in both experimental and survey studies. Throughout, how a sample is chosen is stressed. Size alone is not the determining consideration in sample selection. Good samples do not occur by accident; they are the result of a careful design. (Author/JAZ)

  19. Didaktisk Design

    DEFF Research Database (Denmark)

    Sørensen, Birgitte Holm; Levinsen, Karin

    projekter - Individuelle fordybelsesprojekter. Forfatterne introducerer begrebet elever som didaktiske designere og viser med konkrete eksempler fra dansk, matematik og tværfaglige forløb, hvordan læreren med et overordnet rammedesign kan understøtte elevernes design af deres egne læreprocesser og dermed...

  20. Integreret Design

    DEFF Research Database (Denmark)

    Helweg-Larsen, Klavs; Lenau, Torben Anker; Kristensen, Tore;

    Integreret Design (ItD) var et tværdisciplinært kursus, der gennemførtes i samarbejde mellem Danmarks Designskole, Danmarks Tekniske Universitet og Handelshøjskolen i København i årene 1998 - 2001. Som støtte for undervisningen blev der udviklet et kompendium i bogform, som udgives af Danmarks...

  1. Probabilistic Design

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.

    This chapter describes how partial safety factors can be used in design of vertical wall breakwaters and an example of a code format is presented. The partial safety factors are calibrated on a probabilistic basis. The code calibration process used to calibrate some of the partial safety factors...

  2. Designing Mobilities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    How is the width of the pavement shaping the urban experience? How is the material design of transport infrastructure and mobile technology affording social interaction in everyday life spaces? How do people inhabit these spaces with their bodies and in accordance to social and cultural norms...

  3. Designer's Identity

    DEFF Research Database (Denmark)

    Kunrath, Kamila; Cash, Philip; Li-Ying, Jason

    2016-01-01

    A designer’s professional identity (DPI) develops through both education and professional experience, building on core personality traits and innate skills. In this paper a systematic literature review and a secondary narrative review were developed in order to map personal attributes and design...

  4. Mechanisms Design

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo

    2006-01-01

    Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design such mechan...

  5. Designing Users/Designing Innovation

    DEFF Research Database (Denmark)

    The paper addresses issues of user conceptualisation and representation in the processes of designing and innovating artifacts and use-practices. It is informed by early as well as more recent insights from technology studies within the new sociology of technology (e.g. Akrich 1995, Bijker & Law ...... innovation and change in the realm of industry and society at large.......The paper addresses issues of user conceptualisation and representation in the processes of designing and innovating artifacts and use-practices. It is informed by early as well as more recent insights from technology studies within the new sociology of technology (e.g. Akrich 1995, Bijker & Law...... and enhancing social insights and skills in the design process, a process which spans aspects of field work, analysis, ideation as well as synthesis and construction in the innovative dimensions which shapes their projects. The projects examined in the study vary in sociotechnical complexity and encompass...

  6. Social and environmental impact of the bioclimatic design; Impacto social y ambiental del diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Lopez P, J. Manuel A; Morrillon G, David; Rodriguez V, Luis [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    This article is about two important scopes of the Bioclimatical Design (BD), the Social scope and the environmental scope. As an introduction, it is justified the importance of this topic through the association of the BD in the context of sustainability with our country's economic model. The analysis is done under the perspective of effects of the BD on social and environmental scopes. In social scope is used the Cost and Benefit Analysis according to social evaluation. In environmental scope, effects in water, air and ground are studied, but the measurement is done according to the emissions reduction of CO{sub 2} on atmosphere because of the earn on energy consumption. The results of the measurement of this effects are related with economical costs and benefits, which may show a general view about economical, social and environmental scopes. As conclusions, interest results are show and this is proposed to incorporate them in the economical politics. [Spanish] En este articulo se tocan dos aspectos importantes del Diseno Bioclimatico (DB), el Impacto Social y el Impacto Ambiental. En la introduccion se justifica la importancia del tema, asociando el DB en el contexto de la sustentabilidad, con el modelo economico que se ha imperado en nuestro pais. El estudio se realiza bajo la perspectiva de los impactos que el DB tiene en el aspecto social y en el ambiental. En lo social, se recurre a la metodologia del Analisis Costo-Beneficio para evaluacion Social, en lo ambiental, aunque se tocan los puntos de impacto en aire, agua y uso de suelo, la medicion del impacto se realiza con base en la disminucion de emisiones de CO{sub 2} a la atmosfera por el ahorro en el consumo de energia electrica. Los resultados de la medicion de impactos se cruzan con los costos y beneficios economicos, para presentar un panorama completo en cuanto a aspectos economicos, sociales y ambientales. En las conclusiones se rescatan los resultados de interes y se proponen las inserciones de

  7. Design i Danmark = Danish Design?

    DEFF Research Database (Denmark)

    Lentz, Uffe

    2003-01-01

    Titlen på denne forelæsning har 3 led skønt det ser ud som om der er 4. Design i Danmark er en geografisk afgrænsning af et ikke særligt veldefineret begreb, der både kan dække over ting og aktiviteter, mens Danish Design er en fælles hat man har markedsført en række produkter under, for at få...... værdiopfattelse før fra det ene produkt til det andet. Et Brand ville det hedde i dag....

  8. Systematization of the environmental conditioning project in buildings with a view to optimizing the architectural projects with ragard to environmental control and energy saving. Volume 3. Sistematizacion del proyecto de acondicionamiento ambiental en la edificacion con vistas a la optimizacion de los proyectos arquitectonicos en aspectos de control ambiental y ahorro energetico

    Energy Technology Data Exchange (ETDEWEB)

    Klainsek, J.C.

    1988-07-01

    Due to its significance, energy analysis should be taken into account in both developing and optimization of hygrothermic conditioning system and new building designs. It is also necessary to determine the actual costs of energy saving and conservation modifications for existing buildings. This analysis involves a large number of repetitive calculations, so a computer application has become a necessity and a computer program has been developed to simulate energy needs for a real life office and their functions in one climate region. This program predicts heating and cooling energy requirements. The purpose of the present study is to determine the affect of envelope parameters: orientation, external walls, glazing, shadings, glass-to-wall ratio, surface absorbance of external wells (color), roofs, upon energy saving and conservation for a typical office building in Madrid.

  9. Systematization of the environmental conditioning project in buildings with a view to optimizing the architectural projects with regard to environmental control and energy saving. Sistematizacion del proyecto de acondicionamiento ambiental en la edificacion con vistas a la optimizacion de los proyectos arquitectonicos en aspectos de control ambiental y ahorro energetico

    Energy Technology Data Exchange (ETDEWEB)

    Klainsek, J.C.

    1988-07-01

    Due to its significance, energy analysis should be taken into account in both developing and optimization of hygrothermic conditioning system and new building designs. It is also necessary to determine the actual costs of energy saving and conservation modifications for existing buildings. This analysis involves a large number of repetitive calculations, so a computer application has become a necessity and a computer program has been developed to simulate energy needs for a real life office and their functions in one climate region. This program predicts heating and cooling energy requirements. The purpose of the present study is to determine the effect of envelope parameters: orientation, external walls, glazing, shadings, glass-to-wall ratio, surface absorbance of external walls (color), roofs, upon energy saving and conservation for a typical office building in Madrid.

  10. Systematization of the environmental conditioning project in buildings with a view to optimizing the architectural projects with regard to environmental control and energy saving. Volume 1. Sistematizacion del proyecto de acondicionamiento ambiental en la edificacion con vistas a la optimizacion de los proyectos arquitectonicos en aspectos de control ambiental y ahorro energetico

    Energy Technology Data Exchange (ETDEWEB)

    Klainsek, J.C.

    1988-07-01

    Due to its significance, energy analysis should be taken into account in both developing and optimization of hygrothermic conditioning system and new building designs. It is also necessary to determine the actual costs of energy saving and conservation modifications for existing buildings. This analysis involves a large number of repetitive calculations, so a computer application has become a necessity and a computer program has been developed to simulate energy needs for a real life office and their functions in one climate region. This program predicts heating and cooling energy requirements. The purpose of the present study is to determine the affect of envelope parameters: orientation, external walls, glazing, shadings, glass-to-wall ratio, surface absorbance of external well (color), roofs, upon energy saving and conservation for a typical office building in Madrid.

  11. Design paper

    DEFF Research Database (Denmark)

    Krogh, Jesper; Petersen, Lone; Timmermann, Michael;

    2007-01-01

    , cardiovascular diseases, and dementia. WHO stated in 2000 that depression was the fourth leading cause of disease burden in terms of disability. In 2000 the cost of depression in the US was estimated to 83 billion dollars. A predominance of trials suggests that physical exercise has a positive effect....../unemployed) and the tertiary outcomes consist of biological responses. DESIGN: The trial is designed as a randomized, parallel-group, observer-blinded clinical trial. Patients are recruited through general practitioners and psychiatrist and randomized to three different interventions: 1) non-aerobic, -- progressive resistance...... training, 2) aerobic training, -- cardio respiratory fitness, and 3) relaxation training with minimal impact on strength or cardio respiratory fitness. Training for all three groups takes place twice a week for 4 months. Evaluation of patients' symptoms takes place four and 12 months after inclusion...

  12. Design Diversity

    DEFF Research Database (Denmark)

    Dankl, Kathrina

    2014-01-01

    The publication 'Design Diversity', an exhibition catalogue, focuses on aging and design – a product culture in transformation that aims to help change conventional notions of the later years of life. Age is positioned as a generational issue that has the same relevance for all age groups...... courageous projects for "best agers" and "golden agers" never get beyond the prototype stage, products that paint a more "beige" picture of everyday life can be found in large numbers. This fact raises some key questions: Does the existing product culture reflect today's views on old age? Do contemporary...... awareness of the fact that material culture shapes our view of aging, and therefore is also capable of changing it....

  13. Designing Privacy-by-Design

    NARCIS (Netherlands)

    Rest, J.H.C. van; Boonstra, D.; Everts, M.H.; Rijn, M. van; Paassen, R.J.G. van

    2014-01-01

    The proposal for a new privacy regulation d.d. January 25th 2012 introduces sanctions of up to 2% of the annual turnover of enterprises. This elevates the importance of mitigation of privacy risks. This paper makes Privacy by Design more concrete, and positions it as the mechanism to mitigate these

  14. Smile design.

    Science.gov (United States)

    Davis, Nicholas C

    2007-04-01

    Many scientific and artistic principles considered collectively are useful in creating a beautiful smile. The evaluation and analysis of the face, lips, gingival tissues and teeth are all considered in this process. Recognizing the ideal as a goal provides a direction for diagnosis and treatment planning for smile rejuvenation. This article focuses on the dental and dental-facial composition involved in smile design. Basic facial esthetics are reviewed as a guideline for facial analysis.

  15. Designer Babies

    OpenAIRE

    Menard, Marion; Overgaard, Anne Cecilie; Birisawa, Noella C.; Laloë, Juliette

    2016-01-01

    This project aims at examining the sense-making process of Danish females between the age 18-25 regarding the Designer Babies awareness campaign “How far would you go?”. We investigate how we as communicators can get to know our audience through quantitative and qualitative research methods, and by utilizing various theoretical frameworks such as audience reception analysis and dialogical approach. Our discussion is anchored in Anthony Giddens's theory of ‘modernity and self-identity’, which ...

  16. Organization Design

    OpenAIRE

    Milton Harris; Artur Raviv

    2002-01-01

    This paper attempts to explain organization structure based on optimal coordination of interactions among activities. The main idea is that each manager is capable of detecting and coordinating interactions only within his limited area of expertise. Only the CEO can coordinate company wide interactions. The optimal design of the organization trades off the costs and benefits of various configurations of managers. Our results consist of classifying the characteristics of activities and manager...

  17. Mechanical Design

    Energy Technology Data Exchange (ETDEWEB)

    Shook, Richard; /Marquette U. /SLAC

    2010-08-25

    The particle beam of the SXR (soft x-ray) beam line in the LCLS (Linac Coherent Light Source) has a high intensity in order to penetrate through samples at the atomic level. However, the intensity is so high that many experiments fail because of severe damage. To correct this issue, attenuators are put into the beam line to reduce this intensity to a level suitable for experimentation. Attenuation is defined as 'the gradual loss in intensity of any flux through a medium' by [1]. It is found that Beryllium and Boron Carbide can survive the intensity of the beam. At very thin films, both of these materials work very well as filters for reducing the beam intensity. Using a total of 12 filters, the first 9 being made of Beryllium and the rest made of Boron Carbide, the beam's energy range of photons can be attenuated between 800 eV and 9000 eV. The design of the filters allows attenuation for different beam intensities so that experiments can obtain different intensities from the beam if desired. The step of attenuation varies, but is relative to the thickness of the filter as a power function of 2. A relationship for this is f(n) = x{sub 0}2{sup n} where n is the step of attenuation desired and x{sub 0} is the initial thickness of the material. To allow for this desired variation, a mechanism must be designed within the test chamber. This is visualized using a 3D computer aided design modeling tool known as Solid Edge.

  18. Designerly ways of knowing: design discipline versus design science

    OpenAIRE

    Cross, Nigel

    2001-01-01

    The paper begins with a brief review of the historical concerns with the relationship between design and science, and seeks to clarify three different interpretations of this concern: (a) scientific design, (b) design science, and (c) a science of design. The paper then develops the view of 'design as a discipline', based upon a science of design. This discipline seeks to develop domain-independent approaches to theory and research in design. The underlying axiom of this discipline is that th...

  19. Group Design Problems in Engineering Design Graphics.

    Science.gov (United States)

    Kelley, David

    2001-01-01

    Describes group design techniques used within the engineering design graphics sequence at Western Washington University. Engineering and design philosophies such as concurrent engineering place an emphasis on group collaboration for the solving of design problems. (Author/DDR)

  20. Design or "Design"--Envisioning a Future Design Education

    Science.gov (United States)

    Sless, David

    2012-01-01

    Challenging the common grand vision of Design, this article considers "design" as a humble re-forming process based on evidence to substantiate its results. The designer is likened to a tinker who respects previous iterations of a design and seeks to retain what is useful while improving its performance. A design process is offered, illustrated…

  1. Instalaciones del Pabellón de España en la Expo 2008

    Directory of Open Access Journals (Sweden)

    Fiestas, A.

    2009-09-01

    Full Text Available Is the subject of this article describing the technical installations in the Spanish Pavilion for the International Exhibition “Water and sustainable development” in Saragossa 2008. This description follows the design process until it achieves a low energy consumption building, not only on account of the materials and constructive systems employed, but also on account of the energy efficiency of the installations proposed. For this reason, it is studied from the global siting of the spaces required for installations, to the principal installations, so that the reader can understand the individual functioning of the each, independently and in its relationship to the whole. As one can confirm throughout the article, we are dealing with a work of architecture that optimally integrates passive energy savings with innovative installations technologies, achieving an exemplary icon–given the media importance of an event like an international exhibition–for sustainable architecture (rather than ‘bioclimatic’ architecture.El objeto de este artículo es describir las instalaciones técnicas del Pabellón de España para la Exposición Internacional de Zaragoza 2008 ‘Agua y desarrollo sostenible’. Esta descripción implica narrar el proceso proyectual seguido hasta alcanzar un edificio de bajo consumo energético, no sólo por los materiales y sistemas constructivos empleados, sino también por la eficiencia energética de las instalaciones planteadas. Por ello, se estudia desde la implantación global de los espacios requeridos por las instalaciones hasta sus principales características, de manera que el lector comprenda el funcionamiento de las mismas en relación con el conjunto e individualmente. Como se comprueba a lo largo del artículo, se trata de una obra arquitectónica que integra las medidas pasivas de ahorro energético con la innovación tecnológica de las instalaciones, consiguiendo de esta manera un icono ejemplarizante

  2. Generative design applied to industrial design

    OpenAIRE

    Rebelo Pinto, Carolina

    2015-01-01

    Few industrial and product designers are familiar with Generative Design and its possible benefits and limitations. This thesis is a work towards the understanding of what Generative Design with regards to Industrial Design and Product Design could be. The main quest of the thesis was to discover what are the main practices and current productions in the field of Generative Design in connection to Industrial and Product Design; and additionally what could be the possible opportunities for ind...

  3. Apply Design Patterns to Refactor Software Design

    Science.gov (United States)

    Baggs, Rhoda; Shaykhian, Gholam Ali

    2007-01-01

    Refactoring software design is a method of changing software design while explicitly preserving its unique design functionalities. Presented approach is to utilize design patterns as the basis for refactoring software design. Comparison of a design solution will be made through C++ programming language examples to exploit this approach. Developing reusable component will be discussed, the paper presents that the construction of such components can diminish the added burden of both refactoring and the use of design patterns.

  4. Dansk design - English edition

    DEFF Research Database (Denmark)

    Dickson, Thomas

    2008-01-01

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  5. Exploring Pupils' Beliefs about Designers and Designing

    Science.gov (United States)

    Trebell, Donna

    2011-01-01

    The purpose of this paper is to report on an investigation into pupil beliefs about designers and designing conducted as part of a research project focusing on Designerly Activity in Secondary Design and Technology which builds upon a pilot study (Barlex and Trebell in "Int J Technol Design Educ," 2007). Four research questions drove this element…

  6. Design Argumentation in Academic Design Education

    DEFF Research Database (Denmark)

    Dalsgaard, Peter; Dindler, Christian; Fritsch, Jonas

    2013-01-01

    We explore design argumentation as a resource when teaching interaction design in a university setting. We propose that design argumentation can help bridge between practice-based design education and theoretical issues from university curricula. In this paper, we outline the idea of design...

  7. Revitalización de antiguos cuarteles a partir de un nuevo espacio climático. Criterios para la reducción de la demanda energética. Parque Científico Tecnológico Agroalimentario “PCiTAL”. Gardeny. Lleida. Consorcio “PCital” (Univ. Lérida-Ayuntamiento Lérida

    Directory of Open Access Journals (Sweden)

    Batlle, T.

    2010-03-01

    las decisiones de proyecto y han sido la base para motorizar y monitorizar el edificio finalizado. En fase de anteproyecto se evaluó mediante modelos energéticos la demanda energética asociada a las características arquitectónicas y constructivas del edificio para poder decidir las posibilidades de reducción. Las decisiones sobre los sistemas constructivos, los espacios-atrio y el efecto de humedad y vegetación nos permitían un ahorro en torno a un 23% en calefacción y un 50% en refrigeración. La posibilidad de integrar a un segundo grupo de investigación en el proyecto permitió por un lado cotejar los datos de ahorro y por otro monitorizar el edificio existente y así como programar la monitorización del edificio ya rehabilitado y en uso. Actualmente, sobre una metodología desarrollada, se están ajustando las estrategias bioclimáticas de control para dar el confort óptimo a los espacios intermedios e interiores de los edificios.

  8. System design projects for undergraduate design education

    Science.gov (United States)

    Batill, S. M.; Pinkelman, J.

    1993-01-01

    Design education has received considerable in the recent past. This paper is intended to address one aspect of undergraduate design education and that is the selection and development of the design project for a capstone design course. Specific goals for a capstone design course are presented and their influence on the project selection are discussed. The evolution of a series of projects based upon the design of remotely piloted aircraft is presented along with students' perspective on the capstone experience.

  9. Municipal hydraulic planning for energy saving; Planeacion hidraulica municipal para el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Garcia, Enrique [PTF S.C. Consultores, Leon, Gto. (Mexico)

    1999-07-01

    The efficient handling of the economic and natural resources of the municipalities, is nowadays so much complex, that it requires a formal planning. In the public service of potable water supply, two fundamental approaches are conjugated to consider: the rational use of the water resource and the efficient use of the electrical energy, for its extraction from the underground deep reservoirs. In the paper that is presented, the individual features of the previous matters are described and the positive results in a municipality of the Guanajuato's Low Lands (Bajio ), where already the dual objectives are obtained and that with a more professional municipal hydraulic planning, these will be permanent, with the inherent benefit towards the population. [Spanish] El manejo eficiente de los recursos economicos y naturales de los municipios, es hoy en dia cada vez mas complejo, que requiere una planeacion formal. En el servicio publico de abastecimiento de agua potable, se conjugan dos enfoques primordiales a considerar: el uso racional del recurso agua y la utilizacion eficiente de la energia electrica, para su extraccion de los acuiferos subterraneos profundos. En el trabajo que se presenta, se describen las particularidades de lo anterior y los resultados positivos en un municipio del Bajio guanajuatense, donde ya se logran los objetivos duales y que con una planeacion hidraulica municipal mas profesional, estos seran permanentes, con el beneficio inherente hacia la poblacion.

  10. Mejora de la eficiencia y soluciones de ahorro en edificio existente de oficinas

    OpenAIRE

    Hernández Rodríguez, Eric

    2014-01-01

    L’energia es un factor determinant per al creixement. El consum energètic mundial augmenta sense parar i s’està tornant cada vegada mes insostenible. Som conscients de la mancança de matèria prima la qual cosa implica un pla d’estalvi y una recerca de la eficiència energètica així com un consum responsable. L’estalvi d’energia y l’efecte mediambiental de la generació d’energia elèctrica són dues grans preocupacions de la nostra societat. El present projecte tracta d’analitza...

  11. Energy saving with speed variators; Ahorro de energia con variadores de velocidad

    Energy Technology Data Exchange (ETDEWEB)

    Dolores Anguiano, Ramses; Dolores Vazquez, Raul [Cementos Cruz Azul, Hidalgo (Mexico)

    2005-07-01

    The cement plant Cruz Azul S.C.L. is located in the center of the Mexican republic at 70 km north of the capital. Nowadays the Direction of Cementos Cruz Azul has implemented measures allowing to reduce their production costs. The optimization department found a great area of opportunity at the ventilators of the plant. The ventilators are used in different stages of the process and their flow was normally controlled by means of dampers -due to the high costs of the initial investment and that of maintenance of the speed variation technology which in its majority used direct current equipments. In this case it existed the possibility of making a successful application in two large ventilators, with motors of 1000 HP fed in medium tension (4160 v) in our calcination unit Num. 8. This document shows the development of this project from its initial analysis to its application and results. [Spanish] La planta de cemento Cruz Azul S.C.L. se encuentra localizada en el centro de la republica mexicana a 70 Km al norte de la capital. En estos momentos la direccion de cementos Cruz Azul ha implementado medidas que permitan reducir sus costos de produccion. El departamento de optimizacion encontro una gran area de oportunidad en los ventiladores de la planta. Los ventiladores son utilizados en distintas etapas del proceso y normalmente su flujo era controlado por medio de mamparas, debido a los altos costos como inversion inicial y de mantenimiento de la tecnologia de variacion de velocidad que en su mayoria utilizaba equipos de corriente directa. Para nuestro caso existia la posibilidad de realizar una aplicacion exitosa en dos ventiladores grandes, con motores de 1000 HP alimentados en media tension (4160 v), en nuestra unidad de calcinacion Num. 8. Este documento muestra el desarrollo de este proyecto desde su analisis inicial hasta su aplicacion y resultados.

  12. Proposal for energy saving in air conditioning equipment; Propuesta para ahorro energetico en acondicionadores de aire

    Energy Technology Data Exchange (ETDEWEB)

    Solis Recendez, Daniel H [Division de Ingenieria Electrica, Universidad Nacional Autonoma de Mexico (Mexico)

    2008-10-15

    In the last decades, the air conditioning systems have become a crucial part in the search from comfort in extreme climates. Nevertheless, they have also become one of the greatest energy consumers. In this article it is proposed that the final conditions that the air conditioning equipment looks for not to be fixed, but variable in respect to a certain comfort zone. This zone is a variation of the used one in the bio-climatic chart of Olgyay that considers the rapidity whereupon the reached conditions tend to leave the comfort zone. It is analyzed how to choose the point on the zone that costs less energy in arriving to it. [Spanish] En las ultimas decadas, los sistemas de aire acondicionado se han vuelto una parte crucial en la busqueda de confort en climas extremosos. Sin embargo, tambien se han vuelto de los mayores consumidores de energia. En este articulo se propone que las condiciones finales que busquen lograr los acondicionadores no sean fijas, si no variables respecto a una determinada zona de confort. Dicha zona es una variacion de la utilizada en la carta bioclimatica de Olgyay, que considera la rapidez con que las condiciones alcanzadas tienden a abandonar la zona de confort. Se discute como elegir el punto sobre la zona que cueste menos energia en llegara el.

  13. Ahorro y eficiencia energética en la Agricultura de Precisión

    OpenAIRE

    Valero Ubierna, Constantino; Navas Gracia, Luis Manuel; González Herrero, Fernando; Gómez Gil, Jaime; Ruiz Ruiz, Gonzalo; Barreiro Elorza, Pilar; Andújar Sánchez, Dionisio; Diezma Iglesias, Belen; Baguena Isiegas, Eva; Garrido Izard, Miguel

    2010-01-01

    La agricultura de precisión está en constante desarrollo; las líneas de investigación e innovación son muy activas en este sector, se realizan mediciones y proyectos demostrativos para estudiar la viabilidad o no de aplicación de estas técnicas a los insumos del proceso productivo agrícola (semillas, fertilizantes, pesticidas, etc.). Este conjunto de técnicas cuenta ya con casi tres décadas de desarrollo. Es suficiente como para que nuestros agricultores se planteen...

  14. Ahorre Energia: Consejos sobre el ahorro de dinero y energia en el hogar (Book)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    Learn how to save money with Energy Saver: Tips on Saving Money & Energy at Home, from the U.S. Department of Energy. The Energy Saver guide will help you reduce your monthly energy costs and live more efficiently. This guide takes you through the systems and appliances that consume the most energy in your home, and provides solutions to cut costs for you while saving the environment. The Energy Saver guide also includes transportation tips to help you save money at the pump.

  15. Determinantes del ahorro interno y ajuste estructural en el Perú, 1990-1995

    OpenAIRE

    Efraín Gonzales de Olarte; Cecilia Lévano Castro; Pedro Llontop Ledesma

    1998-01-01

    La economía peruana creció sostenida y establemente desde los años cincuenta hasta mediados de los años setenta; a partir de entonces tuvo un decaimiento que duró hasta fines de los años ochenta, época en la cual el PBI por persona decayó a niveles del año sesenta. Una de las principales causas del crecimiento y crisis fue la inversión, cuya evolución explica lo que sucedió con el producto. A partir de 1991 se ha observado una recuperación del crecimiento, sostenido nuevamente por el aumento ...

  16. Sharing the design intent between industrial designers and engineering designers

    DEFF Research Database (Denmark)

    Laursen, Esben Skov; Møller, Louise

    2016-01-01

    The aim of the paper is to understand the challenges sharing the product frame between industrial designers with the engineering designers. The study is based on six case studies. The analysis showed correspondence between industrial designers and engineering designers in their understanding...... of the key elements of the context and concept. However the analysis also showed a lack of correspondence between the industrial designers and engineering designers in regards to the product framing and thereby how the different elements of the product frame is connected and interrelated....

  17. Service design: tuning the industrial design profession

    NARCIS (Netherlands)

    Sleeswijk Visser, F.

    2013-01-01

    Design is not only about the design and production of goods, but is increasingly addressing complex social issues nowadays. Roles of designers are becoming more and more varied, and at the same time other professionals are increasingly using design tools in their business, organizational or other in

  18. Designing for critique, designing for reflection

    DEFF Research Database (Denmark)

    Løfgreen, Lars Bo

    2010-01-01

    litteraturliste og et stikordsregister. Bogen rummer kapitlerne: “Visual topography: analysing the visual context of an interactive interface” af Lise Agerbæk, “Designing (with) Creativity” af Heidi Philipsen, “Designing for critique, designing for reflection – the (re)emergence of aesthetics in current design...

  19. Enhancing biomedical design with design thinking.

    Science.gov (United States)

    Kemnitzer, Ronald; Dorsa, Ed

    2009-01-01

    The development of biomedical equipment is justifiably focused on making products that "work." However, this approach leaves many of the people affected by these designs (operators, patients, etc.) with little or no representation when it comes to the design of these products. Industrial design is a "user focused" profession which takes into account the needs of diverse groups when making design decisions. The authors propose that biomedical equipment design can be enhanced, made more user and patient "friendly" by adopting the industrial design approach to researching, analyzing, and ultimately designing biomedical products.

  20. Design Characteristics as Basis for Design Languages

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik

    1997-01-01

    The application of modern feature based CAD systems has in many companies lead to significant rationalisation of design, particulary the "down stream" acticities such as NC code generation, FEM analysis, mould flow simulation and documentation. The subject of this paper is the "up stream" activit...... the designer can "spell" a desig. This paper will propose contents of a design language/design grammar.......The application of modern feature based CAD systems has in many companies lead to significant rationalisation of design, particulary the "down stream" acticities such as NC code generation, FEM analysis, mould flow simulation and documentation. The subject of this paper is the "up stream......" activities, i.e.the synthesis of designs. One can now ask: what preconditions have to be fulfilled in order to be able to synthesize designs in an interplay with a computer system, a Designer's Workbench (DWB). One precondition seems to be the existence of one or more design languaes or design grammars, thus...

  1. Industrial design professor wins Design Educator Award for sustainable design

    OpenAIRE

    Chadwick, Heather Riley

    2008-01-01

    Mitzi Vernon, associate professor of industrial design in Virginia Tech's College of Architecture and Urban Studies, has received a Design Educator Award and a $2,000 prize from a competition sponsored by Dell Inc.: ReGeneration: International Green Computing Technology Design.

  2. Information Design: A Bibliography.

    Science.gov (United States)

    Albers, Michael J.; Lisberg, Beth Conney

    2000-01-01

    Presents a 17-item annotated list of essential books on information design chosen by members of the InfoDesign e-mail list. Includes a 113-item unannotated bibliography of additional works, on topics of creativity and critical thinking; visual thinking; graphic design; infographics; information design; instructional design; interface design;…

  3. Design as Value Celebration: Rethinking Design Argumentation

    DEFF Research Database (Denmark)

    Halstrøm, Per Liljenberg

    2016-01-01

    This article introduces knowledge of the rhetorical genre of epideictic to design. The aim is to provide designers with concepts that stimulate their ability to deliberate about design choices and explore the arguments they may be making about the human-made world. The article begins with explora......, situational perspectives, and rhetorical genres, the article concludes that designers can benefit from perceiving their design as value celebration rather than problem solving....... with explorations of how to perceive the situations that designers may address; it then provides rhetorical perspectives that may be useful when creating design arguments; finally, examples of how to use these rhetorical perspectives in design are provided. Based on analyzed examples and theories on design problems...

  4. Design Research between Design and Research

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Markussen, Thomas

    and practice, as expressed in the notion of research as ‘artistic innovation work’. On the other hand, the pressure to expand research in architecture and design has seen a movement towards adopting traditional research paradigms from the technical and social sciences and humanities. For many architects......The discourse on architecture and design research in Denmark in the past thirty years has been stuck in a unproductive dichotomy between research through design on the one hand and a phantom image of academic and theoretical, word-based research on the other. Advocates of the research through...... design strand have argued, that architecture and design research must follow an architecture and design methodology – designing – and be communicated by means of architecture and design media – images and artefacts. Essentially, this view sees no difference between architecture and design research...

  5. Parametric Design Strategies for Collaborative Urban Design

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Yıldırım, Miray Baş; Özkar, Mine

    2013-01-01

    of the generic qualities of proposed designs. Yet, in any collaborative urban design process, some aspects – or parameters – are more likely to be relevant to deliberate than others. And they are not likely to be the same for different design cases. In one case, density and building style may be topical, while...... design students were asked to develop different design strategies for an urban renewal area and subsequently to script design scenarios which reflected the strategies. By means of role playing, the students took on views of different stakeholders. Hence, three different approaches were adopted...

  6. Intelligent design system for design automation

    Science.gov (United States)

    Shakeri, Cirrus; Deif, Ismail; Katragadda, Prasanna; Knutson, Stanley

    2000-10-01

    In order to succeed in today's global, competitive market, companies need continuous improvements in their product development processes. These improvements should result in expending fewer resources on the design process while achieving better quality. Automating the design process reduces resources needed and allows designers to spend more time on creative aspects that improve the quality of design. For the last three decades, engineers and designers have been searching for better ways to automate the product development process. For certain classes of design problems, which cover a large portion of real world design situations, the process can be automated using knowledge-based systems. These are design problems in which the knowledge sources are known in advance. Using techniques from Knowledge-Based Engineering, knowledge is codified and inserted into a knowledge-based system. The system activates the design knowledge, automatically generating designs that satisfy the design constraints. To increase the return on investment of building automated design systems, Knowledge management methodologies and techniques are required for capturing, formalizing, storing, and searching design knowledge.

  7. Analog circuit design designing dynamic circuit response

    CERN Document Server

    Feucht, Dennis

    2010-01-01

    This second volume, Designing Dynamic Circuit Response builds upon the first volume Designing Amplifier Circuits by extending coverage to include reactances and their time- and frequency-related behavioral consequences.

  8. Analog circuit design designing high performance amplifiers

    CERN Document Server

    Feucht, Dennis

    2010-01-01

    The third volume Designing High Performance Amplifiers applies the concepts from the first two volumes. It is an advanced treatment of amplifier design/analysis emphasizing both wideband and precision amplification.

  9. Design and data analysis 1 study design

    Directory of Open Access Journals (Sweden)

    Karthik Suresh

    2012-01-01

    Full Text Available This article is intended to give the reader guidance in evaluating different study designs used in medical research for better scientific quality, reliability and validity of their research. This article explains three main types of study designs with understanding examples. Care and caution with skills and experience needed to design suitable studies and appropriate design coupled with reliable sampling techniques and appropriate statistical analysis, supported by clear objectives with decent communication of the findings, are essential for good research.

  10. Modeling Design Process

    OpenAIRE

    TAKEDA, Hideaki; Veerkamp, Paul; Yoshikawa, Hiroyuki

    1990-01-01

    This article discusses building a computable design process model, which is a prerequisite for realizing intelligent computer-aided design systems. First, we introduce general design theory, from which a descriptive model of design processes is derived. In this model, the concept of metamodels plays a crucial role in describing the evolutionary nature of design. Second, we show a cognitive design process model obtained by observing design processes using a protocol analysis method. We then di...

  11. Ergonomics in design or design in ergonomics

    DEFF Research Database (Denmark)

    Binder, Thomas

    2005-01-01

    Design in Scandinavia has a long tradition of participation in the development of society. Designers in the Nordic countries have taken pride in concerning themselves with problems of everyday living and the design communities at large have been committed proponents of a socially responsible appr...

  12. Computational Design Tools for Integrated Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    : aesthetical, functional and technical requirements. The aim of the present paper is to address the problem of a vague or not existing link between digital conceptual design tools used by architects and designers and engineering analysis and simulation tools. Based on an analysis of the architectural design...

  13. Existential Design Applied in Universal Design Settings.

    Science.gov (United States)

    Torkildsby, Anne Britt

    2016-01-01

    The critical design method aims to discuss ways of opening up the (design) brief when planning, designing, building, operating and maintaining the future of the built environment - public as well as private, indoor as well as outdoor. Focusing on "designials" (fundamental forms of design being), the methodology intends to illustrate the fact that objects; including buildings, parks, transportation systems, etc. may directly encroach upon certain "existentials" (fundamental forms of human being) - thus shed light on how a design process is normally conducted, and furthermore, how that affects people's existential well-being. PMID:27534284

  14. Design rules for dynamic organization design

    DEFF Research Database (Denmark)

    Burton, Richard; Obel, Børge

    2013-01-01

    Organizational design rules are contingent if-then statements about what a good design should be for a given situation. Today’s challenge is to look forward to devise organization design rules for a different future with greater uncertainty and greater interdependency – all with dynamic performance...... demands. These new demands call for new design rules for coordination, incentives and leadership, among others. Our existing rules are mostly based upon past experience and empirical studies of what is. What might be – going beyond what we have observed and explained of yesterday and today to help design...

  15. Design as Gesamtkunstwerk

    DEFF Research Database (Denmark)

    Munch, Anders V.

    Three texts on the historical development of ideas of total design: "The Art of Transgression" on contemporary projects between art, design and architecture; "Design as Gesamtkunstwerk" on the early modern total designs from Morris to Gropius (but mirrored in Panton) & "Throughout any Scale......" on the now classic total design of the 1950s and 60s....

  16. Can design science be used for design?

    DEFF Research Database (Denmark)

    Rose, Jeremy; Markfoged, Kim; Andersen, Jesper Lund

    2010-01-01

    Design Science is currently much discussed in Information Systems research. In our analysis we distinguish two distinct threads in this discussion. The first thread is a meta-debate about the nature of IS research, and (in particular) how design work can properly be enacted as research. The second....... In this research, conducted with student software designers at Aalborg University, we pose the question ‘can design science be used to build software?’ Ten experienced students in the Department of Computer Science participated in experiments to use design science theory as the principle inspiration for small...... helped organise the experiments and supervised the research. Students were surprisingly positive about their experiences with design science and the causes for this enthusiasm, and the underlying contribution of design science to the software developments are discussed....

  17. The design game in Participatory Design and design education

    DEFF Research Database (Denmark)

    Törpel, Bettina

    2006-01-01

    In this contribution, the design game as a method in Participatory Design is discussed. The focus lies on the organizational design game. For using the design game relations of power, socio-technical textures and forms of work and organization are treated as concerns that need to be addressed...... carefully. Cases from student projects are used as illustrating examples; work environments were redesigned and design games played. It turns out that degrees of freedom are present for the choice of (gaming) method as well as the ways of using the selected method. These degrees of freedom should be used...... in a way that will be labeled as »interested«, rather than in a way labeled as »taking for granted«. It is not possible to guarantee an interested and beneficial approach; yet the paper argues on the grounds that reflective gaming practice can be supportive in this direction....

  18. Designing Brave New Worlds.

    Science.gov (United States)

    Szekely, George

    1999-01-01

    Discusses the importance of designing settings for children that encourage hands-on creativity through play. Suggests the designs are art forms requiring a participatory art teaching style. Describes the technique and provides proven design ideas. (CMK)

  19. Software Design Analyzer System

    Science.gov (United States)

    Tausworthe, R. C.

    1985-01-01

    CRISP80 software design analyzer system a set of programs that supports top-down, hierarchic, modular structured design, and programing methodologies. CRISP80 allows for expression of design as picture of program.

  20. Design Activity Framework for Visualization Design.

    Science.gov (United States)

    McKenna, Sean; Mazur, Dominika; Agutter, James; Meyer, Miriah

    2014-12-01

    An important aspect in visualization design is the connection between what a designer does and the decisions the designer makes. Existing design process models, however, do not explicitly link back to models for visualization design decisions. We bridge this gap by introducing the design activity framework, a process model that explicitly connects to the nested model, a well-known visualization design decision model. The framework includes four overlapping activities that characterize the design process, with each activity explicating outcomes related to the nested model. Additionally, we describe and characterize a list of exemplar methods and how they overlap among these activities. The design activity framework is the result of reflective discussions from a collaboration on a visualization redesign project, the details of which we describe to ground the framework in a real-world design process. Lastly, from this redesign project we provide several research outcomes in the domain of cybersecurity, including an extended data abstraction and rich opportunities for future visualization research.

  1. Design Sea State

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Z.

    National codes of practice which specifies the design wave climate on a given location do not yet exist. Nevertheless, decision on the design wave climate is one of the most important tasks of the designer.......National codes of practice which specifies the design wave climate on a given location do not yet exist. Nevertheless, decision on the design wave climate is one of the most important tasks of the designer....

  2. Design of Fuzzy Controllers

    DEFF Research Database (Denmark)

    Jantzen, Jan

    1998-01-01

    Design of a fuzzy controller requires more design decisions than usual, for example regarding rule base, inference engine, defuzzification, and data pre- and post processing. This tutorial paper identifies and describes the design choices related to single-loop fuzzy control, based on an...... international standard which is underway. The paper contains also a design approach, which uses a PID controller as a starting point. A design engineer can view the paper as an introduction to fuzzy controller design....

  3. Design of chemical plant

    International Nuclear Information System (INIS)

    This book describes design of chemical plant, which includes chemical engineer and plan for chemical plant, development of chemical process, cost engineering pattern, design and process development, general plant construction plan, project engineering, foundation for economy on assets and depreciation, estimation for cost on capital investment and manufacturing cost, design with computers optimal design and method like fluid mechanics design chemical device and estimation for cost, such as dispatch of material and device writing on design report and appendixes.

  4. Analog circuit design

    CERN Document Server

    Dobkin, Bob

    2012-01-01

    Analog circuit and system design today is more essential than ever before. With the growth of digital systems, wireless communications, complex industrial and automotive systems, designers are being challenged to develop sophisticated analog solutions. This comprehensive source book of circuit design solutions aids engineers with elegant and practical design techniques that focus on common analog challenges. The book's in-depth application examples provide insight into circuit design and application solutions that you can apply in today's demanding designs. <

  5. Terminal Antenna Design

    OpenAIRE

    Skrivervik, A. K.; Zurcher, J. F.

    2008-01-01

    This paper introduces first some general considerations about antenna miniaturization and multi-band terminal antenna design. These general design principles are then illustrated on some practical applications.

  6. nuclear fuel design criteria

    International Nuclear Information System (INIS)

    Nuclear fuel design is strictly dependent on reactor type and experiences obtained from performance of nuclear fuels. The objectives of the design are reliability, and economy. Nuclear fuel design requires an interdisciplinary work which has to cover, at least nuclear design, thermalhydraulic design, mechanical design, and material properties.The procedure of design, as describe in the quality assurance, consist of a number of steps. The most important parts are: Design description or inputs, preliminary design, detailed design and design output, and design verification. The first step covers objectives and requirements, as defined by the customer and by the regulatory authority for product performance,environmental factors, safety, etc. The second describes assumptions and alternatives, safety, economy and engineering analyses. The third covers technical specifications, design drawings, selection of QA program category, etc. The most important form of design verification is design review by qualified independent internal or external reviewers. The scope of the review depends on the specific character of the design work. Personnel involved in verification and review do not assume prime responsibility for detecting errors. Responsibility for the design remains with the personnel involved in the design work

  7. Integrated circuit design using design automation

    International Nuclear Information System (INIS)

    Although the use of computer aids to develop integrated circuits is relatively new at Sandia, the program has been very successful. The results have verified the utility of the in-house CAD design capability. Custom IC's have been developed in much shorter times than available through semiconductor device manufacturers. In addition, security problems were minimized and a saving was realized in circuit cost. The custom CMOS IC's were designed at less than half the cost of designing with conventional techniques. In addition to the computer aided design, the prototype fabrication and testing capability provided by the semiconductor development laboratory and microelectronics computer network allows the circuits to be fabricated and evaluated before the designs are transferred to the commercial semiconductor manufacturers for production. The Sandia design and prototype fabrication facilities provide the capability of complete custom integrated circuit development entirely within the ERDA laboratories

  8. Design inspections for systems undergoing design modifications

    Energy Technology Data Exchange (ETDEWEB)

    Grimes, B.K.; Norkin, D.P.

    1987-01-01

    The US Nuclear Regulatory Commission's (NRC's) Office of Inspection and Enforcement (IE) has conducted direct inspections (integrated design inspections) of the technical aspects of the nuclear plant design process for several plants under construction. It has also evaluated independent design verification programs and engineering assurance programs at a number of other plants under construction. Many of the lessons learned from these construction phase efforts are directly applicable to operating plants undergoing major modifications. This has been confirmed by IE direct inspections of the design aspects of safety systems outage modifications, which have identified significant potential safety-related deficiencies. The paper discusses methodology for design inspections; failure to maintain up-to-date design basis documentation; and lessons learned common to plants under construction and undergoing major modifications.

  9. Is Engineering Design Disappearing from Design Research?

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Howard, Thomas J.

    2011-01-01

    Most systems and products need to be engineered during their design, based upon scientific insight into principles, mechanisms, materials and production pos-sibilities, leading to reliability, durability and value for the user. Despite the central importance and design’s crucial dependency...... on engineer-ing, we observe a declining focus on engineering design in design research, articu-lated in the composition of contributions to Design Society conferences. Engineer-ing design relates closely to the ‘materialisation’ of products and systems, i.e. the embodiment and detailing. The role of clever...... materialisation is enormous where poor engineering will often manifest in a multitude of consequences for down-stream activities. In this article we will draw a picture of what happens in the embodiment phase of designing, try to create an overview of current understandings and sum up the challenges of proper...

  10. Solar Design Workbook

    Energy Technology Data Exchange (ETDEWEB)

    Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

    1981-06-01

    This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

  11. Performative Urban Design

    DEFF Research Database (Denmark)

    Samson, Kristine

    2011-01-01

    Urban design has come to mean many things. From the architectural masterplans to the informal urban design in temporary spaces and event designs. The paper will focus on urban designs engaging urban designs. Engaging urban design can broadly be understood as temporary design installations inviting...... visitors and participants to engage and interact with the city. Inspired by Lefebvre statement that "the most beautiful cities were those where festivals were not planned in advance” (Lefebvre 1987:36), I will discuss how urban designers can design engaging spaces, where the potentials of the city can...... unfold. Is it, for instance, the formal aesthetics of the design or rather the socio-cultural codes of the existing urban space that engage people? The paper engages in three urban performance designs: 1) The 10th Avenue Plaza at the Highline in New York 2) The temporary installations at Boble Plads...

  12. Design Management Service in Garment Design

    Institute of Scientific and Technical Information of China (English)

    区晓霞

    2014-01-01

    Purpose This paper discusses the design management concepts and studies application methods of the combination of design and management in garment enterprises. Design/methodology/approach This study emphatical y compares the modes before and after designed, analyzes the dif erences between them and puts forward the feasibility practices in a more ef icient way with the concept of design management. Findings From research and data col ection analysis, it clearly shows that if you can pay more at ention to management in clothing enterprise and integrate garment design relative activities, you wil be bet er to accept the chal enge and catch the competitive advantage. Research limitations/implications This study only studies design management in clothing industry common mode, it did not ful y cover the entire industry. Practical implications This paper analyzes problem in clothing enterprise and put forward some advices and application methods to use the concept of design management. This paper is a practical guide on how this could be done ef ectively. Originality/value Creative and value of this paper is to analyze the traditional model, and on this basis to provide the application of fashion design management mode.

  13. Design Games for In-Situ Design

    DEFF Research Database (Denmark)

    Kristiansen, Erik

    2013-01-01

    The mobile culture has spawned a host of context-based products, like location-based and tag-based applications. This presents a new challenge for the designer. There is a need of design methods that acknowledge the context and allows it to influence the design ideas. This article focuses...... sitestorming, is based on a game using Situationistic individual exploration of the site and different types of game cards, followed by a joint evaluation of the generated ideas. A series of evaluations showed that the designers found the method enjoyable to use, that the method motivated idea generation...

  14. Designing in student engagement via course design

    OpenAIRE

    Austen, Liz

    2015-01-01

    The criminology subject group recently revalidated its courses. The priorities for the course design were : discipinary pedagogy, course identity, student satisfaction, academic skills, employability, research informed teaching.

  15. User Experience Design in Webpage Design

    Institute of Scientific and Technical Information of China (English)

    许钰伟

    2014-01-01

    User experience design is becoming more and more important. It originates from network as well as screen products interactive with users, whose scope is very wide. Although research orientations are different, their objective is the same, that is, to make users enjoy the simplest usage mode and reduce thinking in use; Although there is uncertainty, for some specific user group, the similarity of user experience can be recognized by excellent design;Although user experience is at the initial stage, with higher demand of comfort degree in surfing the internet, user experience design will be the core of future website design.

  16. Marketing and design management.

    OpenAIRE

    Bruce, Margaret; Cooper, Rachel

    1997-01-01

    This title looks at the interface between marketing and design management, with particular focus on product development and corporate communications. It considers such issues as the role of design in the organisation, new product strategies and the effectiveness of the marketing/design relationship. Cases cover retail, services and industrial products in order to assess best practice in design management for marketing.

  17. DOE handbook: Design considerations

    International Nuclear Information System (INIS)

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

  18. Designing Healthcare Solutions

    Directory of Open Access Journals (Sweden)

    Devorah E. Klein

    2009-11-01

    Full Text Available Innovation is generated when designers collaborate with scientists and clinicians. Who are designers? Professionals trained to uncover people’s spoken and unspoken needs (human factors researchers, to generate tangible products and services that address these needs in new and better ways (industrial and graphic designers, and to ensure that the design intent is preserved in the final manufactured form (engineers.

  19. Delimiting Inclusive Design

    DEFF Research Database (Denmark)

    Herriott, Richard

    2014-01-01

    This paper was written as an answer to the question raised by my PhD dissertation on accessibility through user-centred and Inclusive Design (ID) methods: can Inclusive Design be delimited? The literature on Inclusive Design deals almost entrirely with consumer product design and assistive...

  20. Instant responsive web design

    CERN Document Server

    Simmons, Cory

    2013-01-01

    A step-by-step tutorial approach which will teach the readers what responsive web design is and how it is used in designing a responsive web page.If you are a web-designer looking to expand your skill set by learning the quickly growing industry standard of responsive web design, this book is ideal for you. Knowledge of CSS is assumed.

  1. DOE handbook: Design considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  2. Integrated Structural Design Education

    DEFF Research Database (Denmark)

    Bjerregaard Jensen, Lotte; Almegaard, Henrik

    2011-01-01

    landscaping and structural design. The integrated courses create a setting for learning about the design of large-scale structures and involve geometry, statics, computer simulation, graphical design and landscape architecture. Together, they educate engineers who can take part in the early design phases...

  3. A room for design

    DEFF Research Database (Denmark)

    Terp, Malene; Laursen, Birgitte Schantz; Jørgensen, Rikke;

    2016-01-01

    providers (n = 7), software designers (n = 3), graphic designer (n = 1), graphic recorder (n = 1), and team leader (n = 1) co-designed a smartphone application for use in early phase schizophrenia care. This paper reports the co-design process. Based on a variety of written data-sources, the paper describes...

  4. Human Systems Design Criteria

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1982-01-01

    This paper deals with the problem of designing more humanised computer systems. This problem can be formally described as the need for defining human design criteria, which — if used in the design process - will secure that the systems designed get the relevant qualities. That is not only...

  5. Design of canals

    CERN Document Server

    Swamee, P K

    2015-01-01

    The book presents firsthand material from the authors on design of hydraulic canals. The book discusses elements of design based on principles of hydraulic flow through canals. It covers optimization of design based on usage requirements and economic constraints. The book includes explicit design equations and design procedures along with design examples for varied cases. With its comprehensive coverage of the principles of hydraulic canal design, this book will prove useful to students, researchers, and practicing engineers. End-of-chapter pedagogical elements make it ideal for use in graduate courses on hydraulic structures offered by most civil engineering departments across the world.

  6. Ergonomic Product Design 21

    International Nuclear Information System (INIS)

    This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

  7. Designing an exhibition

    DEFF Research Database (Denmark)

    Ingemann, Bruno

    2010-01-01

    In this chapter the provoked dialogue as reflection-in-action is used to look into the designing of an exhibition, and the theoretical background is phenomenological and semiotic related to inquiries in the processes of design and the designer as a theoretical fieldwork. The concept of design...... is enveloped by the design process but also by the end product, which is an artefact. Design is much more than a given form that serves the function of an object. I will provide an illustrative case example focuses on the processes of developing the visual and symbolic design of a small poster exhibition...

  8. Web designer's idea book

    CERN Document Server

    McNeil, Patrick

    2014-01-01

    Discover the latest trends in web design! Looking for inspiration for your latest web design project? Expert Patrick McNeil, author of the popular Web Designer's Idea Book series, is back with all new examples of today's best website design. Featuring more than 650 examples of the latest trends, this fourth volume of The Web Designer's Idea Book is overflowing with visual inspiration. Arranged categorically, this fully illustrated guide puts important topics like design styles, elements, themes and responsive design at your fingertips. This new volume also includes a detailed discussion o

  9. Design and Iconic Brands

    Directory of Open Access Journals (Sweden)

    2015-11-01

    Full Text Available The VW Beetle, Apple, Porsche … many iconic brands have reached their status with groundbreaking designs. But what makes these designs so special? And is it really the design factor that accounts for the overall success of a brand? Dr. Walter de Silva shares with us his thoughts on iconic designs, the design process and the role of design in branding. Open your heart and mind to his extensive experience in developing designs for Volkswagen, Audi and other brands of the Volkswagen Group

  10. Design Research between Design and Research

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Markussen, Thomas

    2011-01-01

    The discourse on architecture and design research in Denmark in the past thirty years has been stuck in a unproductive dichotomy between research through design on the one hand and a phantom image of academic and theoretical, word-based research on the other. Advocates of the research through...

  11. The Communication Between Designer and Design Receiver

    DEFF Research Database (Denmark)

    Dai, Zheng; Dai, Yan

    2009-01-01

    When people think about a product,the first impression always mainly influences the result.Product is the medium of communication between designer and designer receiver.Because both of them have varied different experience and background,the information would be biased during the transferring pro...

  12. Applying Software Design Methodology to Instructional Design

    Science.gov (United States)

    East, J. Philip

    2004-01-01

    The premise of this paper is that computer science has much to offer the endeavor of instructional improvement. Software design processes employed in computer science for developing software can be used for planning instruction and should improve instruction in much the same manner that design processes appear to have improved software. Techniques…

  13. Organizing design work

    DEFF Research Database (Denmark)

    Scheuer, John Damm

    2016-01-01

    The aim of this paper is to demonstrate the importance of the kind of understanding of organizing that is implied by design theories for project managers' understanding and organizing of design work. Five theories and their organizing consequences for project managers organizing of design work...... are analyzed. The paper contributes to design research and organization studies by putting the organizing of design projects on the research agenda. It also contributes by demonstrating the importance of being aware of the ontological and epistemological assumptions and organizing consequences of different...... design theories. The selected theories of design thus represent different views on what design is, address different design areas and are based on different ontological and epistemological assumptions that influence their views on how design processes should be organized....

  14. Software Architecture Design Reasoning

    Science.gov (United States)

    Tang, Antony; van Vliet, Hans

    Despite recent advancements in software architecture knowledge management and design rationale modeling, industrial practice is behind in adopting these methods. The lack of empirical proofs and the lack of a practical process that can be easily incorporated by practitioners are some of the hindrance for adoptions. In particular, the process to support systematic design reasoning is not available. To rectify this issue, we propose a design reasoning process to help architects cope with an architectural design environment where design concerns are cross-cutting and diversified.We use an industrial case study to validate that the design reasoning process can help improve the quality of software architecture design. The results have indicated that associating design concerns and identifying design options are important steps in design reasoning.

  15. Participatory workspace design

    DEFF Research Database (Denmark)

    Seim, Rikke; Broberg, Ole

    2010-01-01

    Ergonomics are rarely addressed directly in the design and re-design of workspaces in Denmark. Often architects, engineers and other actors design the workspaces on the basis of for example spatial, technological or finan-cial considerations, thereby making ergonomics a by-product of the design...... process. However, by introducing ergonomists in the role of ‘workspace de-signers’ early in the design process, ergonomic considerations as well as the involvement of employees, can be integrated in the design process. In this article we demonstrate the use of the workspace design approach in a case study...... where an industrial manufacturer is undergoing a major technological change: going from labour intensive manual work to a highly automated production. The workspace design team, which included the company’s OHS consultant, designed the intervention as a participatory design process by using visually...

  16. Designing Futures in Indonesia

    OpenAIRE

    Crosby, Alexandra

    2016-01-01

    Design is a wide reaching and unruly idea, often associated with seamless global mobility, ubiquitous consumerism, elite urban tastes, and fast paced economic growth. But design is also increasingly understood to be operating at edges, as a necessary response to the ethical and political challenges of advanced global capitalism. Design is both the problem and the solution, and effects everything. As Tony Fry writes ‘Design–the designer and designed objects, images, systems and things–shapes t...

  17. Reliable Design Versus Trust

    Science.gov (United States)

    Berg, Melanie; LaBel, Kenneth A.

    2016-01-01

    This presentation focuses on reliability and trust for the users portion of the FPGA design flow. It is assumed that the manufacturer prior to hand-off to the user tests FPGA internal components. The objective is to present the challenges of creating reliable and trusted designs. The following will be addressed: What makes a design vulnerable to functional flaws (reliability) or attackers (trust)? What are the challenges for verifying a reliable design versus a trusted design?

  18. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    . The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

  19. Missile Design Toolbox

    OpenAIRE

    Ekker, David A.

    1994-01-01

    Missile Design (MSLDSN) is a toolbox created to be used with The MathWorks' MATLAB® interactive computing environment, version 4.2. MSLDSN provides the missile deSigner with a number of tools to aid in establishing and evaluating missile parameters during the conceptual phase of design. MSLDSN aids the designer in establishing an initial configuration which is then refined using the various missile programs (e.g .• Missile Datcom). MSLDSN is limited to designing solidpropellant- ...

  20. Reusing Design Knowledge

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Wallace, Ken M.

    2006-01-01

    The long-term aim of this research is to develop a method of indexing design knowledge that is intuitive to engineering designers and therefore assists the designers to retrieve relevant information. This paper describes the development and preliminary evaluation of a method of indexing design kn...... knowledge. The concepts for the method have been elicited from designers’ descriptions of the design process. The method has been evaluated by indexing 92 reports related to one particular aero-engine....

  1. Mechanizing Exploratory Game Design

    OpenAIRE

    Smith, Adam Marshall

    2012-01-01

    Game design is an art form that deals with inherently interactive artifacts. Game designers craft games (assembled from rule systems and content), but they really seek to manipulate play: the interaction between games and players. When developing new games that are similar to past games, a designer may rely on previous experience with related designs and relatively easy access to players familiar with conventional design choices. When exploratorily venturing into uncharted territory, uncoveri...

  2. OBJECT ORIENTED DESIGN HEURISTICS

    OpenAIRE

    DEEPALI GUPTA; Mr. RAKESH KUMAR

    2011-01-01

    Object-oriented design is a process of identifying relevant objects, factoring them into classes, organizing hierarchically, and establishing dynamic collaborations among the objects. It is a difficult process especially for novice designers. In order to guide the novices, software engineers used some hints, guidelines and tips to communicate design experience from the expert. Design heuristic is common solution to design problems that developers encounter during software development. Heurist...

  3. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  4. The Scope of Design Studying

    Institute of Scientific and Technical Information of China (English)

    JIN Yin; Ren Wenying

    2007-01-01

    This article trys to discuss the scope of design studying in two fields.Firstly, design has three meanings: wide design, art design and industrial design.Secondly, design studying has five contents: cultural, philosophical, methodological, produced and marketable trends.

  5. Design professional activity analysis in design management

    Directory of Open Access Journals (Sweden)

    Claudia de Souza Libanio

    2013-08-01

    Full Text Available Design use perception, as an essential element for achieving competitive advantage, also suggests the need to manage the design activities in companies. However, a few is discussed about the activity of these design professionals who participate in this process, their roles, functions and competencies, including  their connections to a company and other involved sectors. This article aims to analyze, during the design management processes, the work relations of design professionals connected to organizations both internal and externally, in order to comprehend the structure and intervenient factors on the activity of these professionals, as well as the interactions with their main coworkers. The methodology was exploratory and qualitative, using in-depth interviews with three design professionals. Subsequently, the responses were analyzed allowing the comparison of these obtained data to the theoretical bases researched. Through this case study, it was possible to realize the aspects and the structure of the design professional activity, connected intern and externally to organizations, as well as its relations with the main coworkers.

  6. The interactive design collaboratorium

    DEFF Research Database (Denmark)

    Bødker, Susanne; Petersen, Marianne Graves; Krogh, Peter Gall

    2001-01-01

    This paper reports on experimental process in which a prototype was developed of an interactive design collaboatorium, in cooperation with a group of usability designers. In a longterm research cooperation, this usability group has changed its work practice in order to work in the design...... collaboratorium. The design collaboratorium was developed to move usability design away from a lab towards an open physical and organizational space where designer, users and engineers meet and collaborate, or work alongside each other. The cooperation between researchers and the usability gruop has resulted...... in practical experimentation in projects and in design of an experimental design collaboratorium emploing electronic whiteboards, 3D design documentation, etc. This experimental prototype has been evaluated in cooperative workshops. We report on the results of this evaluation....

  7. Optimal Hospital Layout Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine

    This PhD project presents a design model that generates and evaluates hospital designs with respect to long-term performances and functionalities. By visualizing and quantifying costs and performances in the early design phases, it is possible to make design choices based on a qualified, profound...... foundation. The basis of the present study lies in solving the architectural design problem in order to respond to functionalities and performances. The emphasis is the practical applicability for architects, engineers and hospital planners for assuring usability and a holistic approach of functionalities...... and performances. By formal descriptions, a design model can weigh and compare the impact of different perspectives and, even in the early design phase, it can visualize and quantify consequences for design choices. By qualitative study of hospital design and hospital functionality, formal descriptions develop...

  8. Understanding representations in design

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1998-01-01

    Representing computer applications and their use is an important aspect of design. In various ways, designers need to externalize design proposals and present them to other designers, users, or managers. This article deals with understanding design representations and the work they do in design....... The article is based on a series of theoretical concepts coming out of studies of scientific and other work practices and on practical experiences from design of computer applications. The article presents alternatives to the ideas that design representations are mappings of present or future work...... regarding use and design. The article proposes that abstraction, elevating the representation from the situation, is not the only way to do this, and it proposes alternatives....

  9. Designing For Democracy

    DEFF Research Database (Denmark)

    Knutz, Eva; Markussen, Thomas; Thomsen, Signe Mårbjerg;

    2014-01-01

    n this paper we focus on ‘patient-democracy’ and ‘shared decision-making’ seen from the perspective of design practice and design research. In the research on democracy in healthcare it is rarely questioned what forms of democracy underlies these concepts. We have examined three different theories...... there are already a number of approaches available which in one way or the other address the relationship between design, democracy and power. We provide an account of participatory design, adversarial design and design activism thereby pointing towards design’s potential for re-distributing power and authority...... in healthcare. Positioning ourselves within design activism, we have set up a series of disruptive design experiments at a Danish Hospital. The aim of these experiments is to make inquiries into the hospital’s own conception of democracy and to use design activism to re-negotiate the roles and rights...

  10. OBJECT ORIENTED DESIGN HEURISTICS

    Directory of Open Access Journals (Sweden)

    DEEPALI GUPTA

    2011-01-01

    Full Text Available Object-oriented design is a process of identifying relevant objects, factoring them into classes, organizing hierarchically, and establishing dynamic collaborations among the objects. It is a difficult process especially for novice designers. In order to guide the novices, software engineers used some hints, guidelines and tips to communicate design experience from the expert. Design heuristic is common solution to design problems that developers encounter during software development. Heuristic is defined as the use of general knowledge gained by experience. Design heuristics are design experience from object-oriented developers. It is small and simpledesign expertise. This knowledge from the experienced designers is used to guide the novices. The purpose of this paper is to document design heuristics of object-oriented approach from literature study.

  11. Radiological design guide

    International Nuclear Information System (INIS)

    The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design

  12. Radiological design guide

    Energy Technology Data Exchange (ETDEWEB)

    Evans, R.A.

    1994-08-16

    The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design.

  13. Mechatronic Design Automation

    DEFF Research Database (Denmark)

    Fan, Zhun

    This book proposes a novel design method that combines both genetic programming (GP) to automatically explore the open-ended design space and bond graphs (BG) to unify design representations of multi-domain Mechatronic systems. Results show that the method, formally called GPBG method, can...... successfully design analogue filters, vibration absorbers, micro-electro-mechanical systems, and vehicle suspension systems, all in an automatic or semi-automatic way. It also investigates the very important issue of co-designing plant-structures and dynamic controllers in automated design of Mechatronic...

  14. Microwave circulator design

    CERN Document Server

    Linkhart, Douglas K

    2014-01-01

    Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.

  15. Introduction to combinatorial designs

    CERN Document Server

    Wallis, WD

    2007-01-01

    Combinatorial theory is one of the fastest growing areas of modern mathematics. Focusing on a major part of this subject, Introduction to Combinatorial Designs, Second Edition provides a solid foundation in the classical areas of design theory as well as in more contemporary designs based on applications in a variety of fields. After an overview of basic concepts, the text introduces balanced designs and finite geometries. The author then delves into balanced incomplete block designs, covering difference methods, residual and derived designs, and resolvability. Following a chapter on the e

  16. Thoughts on Interaction Design

    CERN Document Server

    Kolko, Jon

    2009-01-01

    Interaction Designers-whether practicing as Usability Engineers, Visual Interface Designers, or Information Architects-attempt to understand and shape human behavior in order to design products that are at once usable, useful, and desirable. Although the value of design is now recognized as essential to product development, the field is often misunderstood by managers and other team members, who don't understand a designer's role in a team. This can cause inefficient and ineffective products. Thoughts on Interaction Design gives individuals engaged in this profession the dialogue to justify t

  17. Fuel element design handbook

    Energy Technology Data Exchange (ETDEWEB)

    Merckx, K.R.

    1958-09-01

    The economic development of nuclear reactors depends upon the integrated progress in the fields of reactor design, fuel element design, reactor operation, and fuel production and separation. Broad criteria, which restrict the fuel element design, are determined by the mutual consideration of the problems encountered in all the above fields. Hence, no stage of reactor design or operation is independent of the fuel element problem, nor can the fuel element designer disregard the interest of any one field. As an introduction to the fuel element design problem, this chapter describes how the general criteria for a fuel element are determined.

  18. The Designer as Facilitator

    DEFF Research Database (Denmark)

    Bang, Anne Louise

    2009-01-01

    This is a report from an on-going research project within design research. The project involves a collaborative partner from the textile industry working with fabrics for upholstery. The author - herself a textile designer, is affiliated with the design unit in the company and the project has...... a very strong relation to design practice. Focusing on so-called emotional values the project investigates how stakeholders and end-users can actively contribute to the design process. Even though that the collaborating company has an in-house design unit responsible for certain emotional as well...

  19. The circuit designer's companion

    CERN Document Server

    Williams, Tim

    2013-01-01

    The Circuit Designer's Companion covers the theoretical aspects and practices in analogue and digital circuit design. Electronic circuit design involves designing a circuit that will fulfill its specified function and designing the same circuit so that every production model of it will fulfill its specified function, and no other undesired and unspecified function.This book is composed of nine chapters and starts with a review of the concept of grounding, wiring, and printed circuits. The subsequent chapters deal with the passive and active components of circuitry design. These topics are foll

  20. Bayesian Geostatistical Design

    DEFF Research Database (Denmark)

    Diggle, Peter; Lophaven, Søren Nymand

    2006-01-01

    locations to, or deletion of locations from, an existing design, and prospective design, which consists of choosing positions for a new set of sampling locations. We propose a Bayesian design criterion which focuses on the goal of efficient spatial prediction whilst allowing for the fact that model......This paper describes the use of model-based geostatistics for choosing the set of sampling locations, collectively called the design, to be used in a geostatistical analysis. Two types of design situation are considered. These are retrospective design, which concerns the addition of sampling...

  1. Handbook of optical design

    CERN Document Server

    Malacara-Hernández, Daniel

    2013-01-01

    Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also di

  2. Professional ASPNET Design Patterns

    CERN Document Server

    Millett, Scott

    2010-01-01

    Professional ASP.NET Design Patterns will show you how to implement design patterns in real ASP.NET applications by introducing you to the basic OOP skills needed to understand and interpret design patterns. A sample application used throughout the book is an enterprise level ASP.NET website with multi-tiered, SOA design techniques that can be applied to your future ASP.NET projects. Read about each design pattern in detail, including how to interpret the UML design, how to implement it in ASP.NET, its importance for ASP.NET development, and how it's integrated into the final project.

  3. Design Communication: Transfer of Design Principles & Practice

    OpenAIRE

    Guille, Jackie

    2011-01-01

    The report documents a consultancy undertaken for Traidcraft, UK focused on one of their long-standing suppliers St. Mary's Mahila Shikshan Kendra (SMSK), Ahmedabad in the provision of training in design innovation, to both consolidate and sustain their existing creative practice in embroidered products and to support and facilitate the progressive development of design expertise at SMSK. Traidcraft is the UK’s leading Fairtrade organisation and has had a valued relationship with SMSK that st...

  4. Design reliability engineering

    International Nuclear Information System (INIS)

    Improved design techniques are needed to achieve high reliability at minimum cost. This is especially true of space systems where lifetimes of many years without maintenance are needed and severe mass limitations exist. Reliability must be designed into these systems from the start. Techniques are now being explored to structure a formal design processes that will be more complete and less expensive. The intent is to integrate the best features of design, reliability analysis, and expert systems to design highly reliable systems to meet stressing needs. Taken into account are the large uncertainties that exist in materials, design models, and fabrication techniques. Expert systems are a convenient method of integrating into the design process a complete definition of all elements that should be considered and an opportunity to integrate the design process with reliability, safety, test engineering, maintenance, and operator training. The approach being pursued to accomplish the design reliability engineering process is described. Potential benefits using the design reliability engineering approach are discussed. Design reliability engineering can become a very powerful and cost-effective design tool. The methodology takes advantage of recent developments in computers, expert systems, and reliability engineering to cost-effectively enhance the design process

  5. Designated Wildlife Lakes - points

    Data.gov (United States)

    Minnesota Department of Natural Resources — This is a point shapefile of Designated Wildlife Lakes in Minnesota. This shapefile was created by converting lake polygons from the Designated Wildlife Lakes...

  6. Energy design for architects

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, A. (ed.)

    1989-01-01

    This book contains techniques for energy efficiency in architectural design. Many aspects are covered including: cost; comfort and health; energy use; the design process; and analytical techniques. 202 figs. (JF)

  7. Encouraging Creativity in Design.

    Science.gov (United States)

    Kawenski, Mary

    1991-01-01

    This article describes a six-week course for design students called "Needs Awareness and Design" which stresses the development of creative thinking skills. Brainstorming is recommended for identifying many ideas, and synectics is stressed for actual problem solving. (DB)

  8. Photonic Design for Photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Kosten, E.; Callahan, D.; Horowitz, K.; Pala, R.; Atwater, H.

    2014-08-28

    We describe photonic design approaches for silicon photovoltaics including i) trapezoidal broadband light trapping structures ii) broadband light trapping with photonic crystal superlattices iii) III-V/Si nanowire arrays designed for broadband light trapping.

  9. Exemplary Design Practice

    DEFF Research Database (Denmark)

    Jørgensen, Niels

    The didactic principle of exemplary learning may be defined briefly as 'learning by example'. In design education, working with a practical example is particularly appropriate, because design by definition is about creating a solution to a practical problem. Indeed, some design theorists claim...... that design knowledge and knowing is inseparable from practice, as in Donald Schön's suggestion that design education could be organized as a 'practicum' and based theoretically on an 'epistemology of practice'. However, the combination of exemplary learning and design studies does raise several questions......, including: If design knowing is bound to a given practical design context, how is it possible to generalize such knowing, as presumably required by an exemplary learning approach? To explore these questions, an account is given of the theories of exemplary learning proposed by Martin Wagenschein and Oskar...

  10. Optical system design

    CERN Document Server

    Fischer, Robert F

    2008-01-01

    Honed for more than 20 years in an SPIE professional course taught by renowned optical systems designer Robert E. Fischer, Optical System Design, Second Edition brings you the latest cutting-edge design techniques and more than 400 detailed diagrams that clearly illustrate every major procedure in optical design. This thoroughly updated resource helps you work better and faster with computer-aided optical design techniques, diffractive optics, and the latest applications, including digital imaging, telecommunications, and machine vision. No need for complex, unnecessary mathematical derivations-instead, you get hundreds of examples that break the techniques down into understandable steps. For twenty-first century optical design without the mystery, the authoritative Optical Systems Design, Second Edition features: Computer-aided design use explained through sample problems Case studies of third-millennium applications in digital imaging, sensors, lasers, machine vision, and more New chapters on optomechanic...

  11. Design and sustainable transition

    DEFF Research Database (Denmark)

    Holm, Jesper; Søndergård, Bent; Hansen, Ole Erik

    2010-01-01

    Unfolding the role of design pracitice networks within niche formation. Case in insulation fabrics.......Unfolding the role of design pracitice networks within niche formation. Case in insulation fabrics....

  12. Performing Performance Design Anglonationally

    DEFF Research Database (Denmark)

    2016-01-01

    Video recording of pecha kucha style bricolage aural enactment of an international version of performance design......Video recording of pecha kucha style bricolage aural enactment of an international version of performance design...

  13. Dynamic Stage Design

    Institute of Scientific and Technical Information of China (English)

    Florian von Hofen[GER

    2013-01-01

    Concepts and methods for dynamic stage designs were introduced ranging from different ifelds of TV live shows, exhibitions and theatre performances, and a special emphasis was put on solution to the theatre stage design.

  14. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    a shared interdisciplinary research and educational collaboration. As a creative research initiative it focuses on change and innovative thinking. The innovativeness is a result of the strongly interdisciplinary perspective which is at the heart of Designing Human Technologies. Designing Human Technologies...... and the design process, in ethical and society-related concerns, and in evaluating how designs fulfill needs and solve problems. Designing Human Technologies subscribes to a broad technology concept including information and communication, mobile, environmental/sustainable and energy technologies......Design is increasingly becoming a part of the university curriculum and research agenda. The keynote present and discuss Designing Human Technologies – an initiative aiming at establishing a design oriented main subject area alongside traditional main subject areas such as Natural Science...

  15. Design reliability engineering

    International Nuclear Information System (INIS)

    Improved design techniques are needed to achieve high reliability at minimum cost. This is especially true of space systems where lifetimes of many years without maintenance are needed and severe mass limitations exist. Reliability must be designed into these systems from the start. Techniques are now being explored to structure a formal design process that will be more complete and less expensive. The intent is to integrate the best features of design, reliability analysis, and expert systems to design highly reliable systems to meet stressing needs. Taken into account are the large uncertainties that exist in materials, design models, and fabrication techniques. Expert systems are a convenient method to integrate into the design process a complete definition of all elements that should be considered and an opportunity to integrate the design process with reliability, safety, test engineering, maintenance and operator training. 1 fig

  16. Medicines by Design

    Science.gov (United States)

    ... Order Search the NIGMS Website Search the NIGMS Website NIGMS Home Research Funding Research Training News & Meetings Science Education About NIGMS NIGMS Home > Science Education > Medicines By Design Medicines By Design Spotlight Nature's Medicine Cabinet A ...

  17. The Learning Design Specification

    NARCIS (Netherlands)

    Olivier, Bill; Tattersall, Colin

    2005-01-01

    Olivier, B. & Tattersall, C. (2005). The Learning Design Specification In: Koper, R. & Tattersall, C., Learning Design: A Handbook on Modelling and Delivering Networked Education and Training (pp. 21-40). Berlin-Heidelberg: Springer Verlag.

  18. The Design Space

    DEFF Research Database (Denmark)

    Heape, Chris

    as a linear progression of sequential events and as an altogether rational, decision making process, do not reflect the actual nature of designing. These process descriptions are fed back into design education to influence students’ design activity and create difficulties for them as they are put...... that process as a linear progression of sequential events and as an altogether rational, decision making process.  One question to emerge from the findings in this dissertation is whether some research into the design process has in fact been about the design process or more concerned with the description...... in a position where expectations focus on a rational and expedient resolution of design tasks, at odds with their actual experience of designing.  The aim of this research endeavour was to reconceptualise the design process. To do this a series of research experiments were established as an educational...

  19. Designs for learning

    DEFF Research Database (Denmark)

    Maibom, Inger; Fibiger, Johannes; Bonde Nissen, Alice

    2016-01-01

    is to provide input for the further education of teachers and to develop new methods for using digital resources in learning designs. Our project is founded on action research: intervention in classrooms through a circle of designing, testing and evaluating digital based teaching. We use the concept of Design......-Based Research (DBR) built on intervention in an iterative process in order to strengthen the design and to generate knowledge about learning design. In design-based research the researcher creates a learning design together with the involved actors, and for this purpose the three-phased research design...... from restricted pedagogical trend concepts or technological activism, or from restricted professional/subject didactical aims, but instead they attempt to find the complementary relation between pedagogy, technology and subject. Another tendency is that the weight has moved from using existing...

  20. Participatory design based research

    DEFF Research Database (Denmark)

    Dau, Susanne; Bach Jensen, Louise; Falk, Lars

    2014-01-01

    This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus.......This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus....

  1. Design Verifikation Patterns

    DEFF Research Database (Denmark)

    Knudsen, John; Ravn, Anders Peter; Skou, Arne

    2007-01-01

    Design Verification Patterns are formal specifications that define the semantics of design patterns. For each design pattern, the corresponding verification pattern give a set of proof obligations. They must be discharged for a correct implementation of the pattern. Additionally there is a set...... of properties that may be used in the design and verification of applications that employ the pattern. The concept is illustrated by examples from general software engineering and more specialised properties for embedded software....

  2. Design of Reversible Counter

    OpenAIRE

    Md. Selim Al Mamun; B. K. Karmaker

    2014-01-01

    This article presents a research work on the design and synthesis of sequential circuits and flip-flops that are available in digital arena; and describes a new synthesis design of reversible counter that is optimized in terms of quantum cost, delay and garbage outputs compared to the existing designs. We proposed a new model of reversible T flip-flop in designing reversible counter.

  3. Designing information systems

    CERN Document Server

    Blethyn, Stanley G

    2014-01-01

    Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

  4. Wind Turbine Blade Design

    OpenAIRE

    Richard J. Crossley; Peter J. Schubel

    2012-01-01

    A detailed review of the current state-of-art for wind turbine blade design is presented, including theoretical maximum efficiency, propulsion, practical efficiency, HAWT blade design, and blade loads. The review provides a complete picture of wind turbine blade design and shows the dominance of modern turbines almost exclusive use of horizontal axis rotors. The aerodynamic design principles for a modern wind turbine blade are detailed, including blade plan shape/quantity, aerofoil selection ...

  5. Future Interaction Design II

    CERN Document Server

    Isomaki, Heikki M

    2009-01-01

    Argues that it is the human character rather than the technology that should determine the nature of interaction, and that the term 'interaction design' covers a range of issues relevant to enabling quality design. This book discusses a number of topics, such as psychological design processes, gerotechnology, modeling, and e-learning

  6. The algorithm design manual

    CERN Document Server

    Skiena, Steven S

    2008-01-01

    Explaining designing algorithms, and analyzing their efficacy and efficiency, this book covers combinatorial algorithms technology, stressing design over analysis. It presents instruction on methods for designing and analyzing computer algorithms. It contains the catalog of algorithmic resources, implementations and a bibliography

  7. Revisiting "Beyond Instructional Design"

    Science.gov (United States)

    Sims, Rod

    2015-01-01

    Since the article "Beyond Instructional Design: Making Learning Design a Reality" (Sims, 2006) was published, much has changed in the opportunities we have for learning, and Professor Rod Sims's thinking has evolved. In this article, Professor Rod Sims reflects upon his original article, and he offers an evolved model of learning design,…

  8. What Is Information Design?

    Science.gov (United States)

    Redish, Janice C. (Ginny)

    2000-01-01

    Defines two meanings of information design: the overall process of developing a successful document; and the way the information is presented on the screen (layout, typography, color, and so forth). Discusses the future importance of both of these meanings of information design, in terms of design for the web and single-sources (planning…

  9. What Task Designers Do.

    Science.gov (United States)

    Johnson, Keith

    2000-01-01

    Describes a research project that is concerned with the design procedures followed by those engaged in designing pedagogic tasks for use in classrooms. Focuses on the part of the project that involves actual observation of designers in the process of developing one specific task for class use. Findings are presented under three headers: control…

  10. Designing for Mathematical Abstraction

    Science.gov (United States)

    Pratt, Dave; Noss, Richard

    2010-01-01

    Our focus is on the design of systems (pedagogical, technical, social) that encourage mathematical abstraction, a process we refer to as "designing for abstraction." In this paper, we draw on detailed design experiments from our research on children's understanding about chance and distribution to re-present this work as a case study in designing…

  11. Design Makes A Splash

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The capital city hosts new blueprints for modern living What does the word "design" conjure up for you? Luxury clothing,awesome graphics,or fancy furniture? Beijingers can find their own answers at the 2011 Beijing Design Week and the First Beijing International Design Triennial from September 26 to October 3.

  12. Design on Your Face

    Science.gov (United States)

    Funk, Roger L.

    2004-01-01

    This feature article has two goals. The first is to muse about the role of style and styling in the world of design and designing. The second is to present a project with which to engage students in several aspects of industrial design. This brief has been developed to use it either solely as a research activity or as a combined research and…

  13. Designing Simulation Systems

    Science.gov (United States)

    Twelker, Paul A.

    1969-01-01

    "The purpose of this paper is to outline the approach to designing instructional simulation systems developed at Teaching Research. The 13 phases of simulation design will be summarized, and an effort will be made to expose the vital decision points that confront the designer as he develops simulation experiences. (Author)

  14. Tornado design classification

    International Nuclear Information System (INIS)

    This guide describes a method acceptable to the NRC staff for identifying those structures, systems, and components of light-water-cooled reactors that should be designed to withstand the effects of the Design Basis Tornado (see Regulatory Guide 1.76, ''Design Basis Tornado for Nuclear Power Plants''), including tornado missiles, and remain functional

  15. Community based design support

    NARCIS (Netherlands)

    Daalhuizen, J.; Badke-Schaub, P.; Fokker, J.

    Different approaches of design methodology that have been developed throughout the history of the design methods movement have produced many insights into the structure of the design process (Alexander, 1964; Simon, 1969; Schön. 1983; Hubka and Eder, 1987; Pahl and Beitz. 1984; Roozenburg and Eekels

  16. LHC Design Report

    CERN Document Server

    CERN. Geneva; Collier, Paul; Lebrun, P; Myers, Stephen; Ostojic, Ranko; Poole, John; Proudlock, Paul

    2004-01-01

    The LHC Design Report is presented in three volumes: the first concerns the main ring, the second the infrastructure and general services and the third, the injector chain. The conceptual design was published in 1995 and this report provides a snapshot of the detailed design as it stands at the time of writing - early 2004.

  17. Fusion engineering design center

    International Nuclear Information System (INIS)

    In the spring of 1985, the Department of Energy (DOE) directed the Design Center to take a lead responsibility in assessing the engineering feasibility of a very compact tokamak experiment with copper coils. Following this assessment, the Design Center studied the Ignitor concept at the request of DOE and arrived at a design configuration. Many features of this configuration have been incorporated into the national baseline conceptual design for a Compact Ignition Tokamak (CIT). The Design Center continued to participate in the mirror program by contributing to the Minimars design effort, a two-year program to develop and describe an attractive tandem mirror reactor concept. The Design Center's principal role is in configuration definition of the candidate concepts. The Design Center continues to lead the engineering activities for the International Tokamak Reactor program. Advanced commercial tokamaks were studied by the Design Center as part of the Tokamak Power Systems Studies project coordinated by the DOE Office of Fusion Energy. The Design Center also provided design integration of the US effort. A cost accounting system that is applicable to all magnetic fusion reactor design studies was developed and applied to different confinement concepts and types of projects. The system provides the structure for development of a fusion cost database and validated cost estimating procedures

  18. Measuring software design

    Science.gov (United States)

    1986-01-01

    An extensive series of studies of software design measures conducted by the Software Engineering Laboratory is described. Included are the objectives and results of the studies, the method used to perform the studies, and the problems encountered. The document should be useful to researchers planning similar studies as well as to managers and designers concerned with applying quantitative design measures.

  19. The Backpack Design Challenge

    Science.gov (United States)

    Roman, Harry T.

    2010-01-01

    Something as simple as carrying books to school can be an interesting design challenge for students. It's an old problem that gets reinvented from time to time. In this article, the author discusses a backpack design challenge in which teachers work with students to design another way to carry books to school. The challenge started by trying to…

  20. Articulating Design Approaches?

    DEFF Research Database (Denmark)

    Kensing, Finn; Bødker, Keld; Simonsen, Jesper

    We are working on an approach for designing CSCW systems since we advocate the importance of generalizing from own work practice as designers and from studies of designers working under industrial conditions. We use the term approach as something in between commodified methods and isolated techni...

  1. Investigating the Design Process

    DEFF Research Database (Denmark)

    Kautz, Karlheinz

    2011-01-01

    /methodology/approach – Based on an integrated framework for user participation derived from the participatory design literature the research was performed as a case study and semi-structured, open-ended interviews were conducted with about a third of the development team and with a representative sample of key players...... to understand what participatory design is and how, when and where it can be performed as an instance of a design process in agile development. As such the paper contributes to an analytical and a design theory of participatory design in agile development. Furthermore the paper explicates why participatory...

  2. Tribology in machine design

    CERN Document Server

    Stolarski, Tadeusz

    1999-01-01

    ""Tribology in Machine Design is strongly recommended for machine designers, and engineers and scientists interested in tribology. It should be in the engineering library of companies producing mechanical equipment.""Applied Mechanics ReviewTribology in Machine Design explains the role of tribology in the design of machine elements. It shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications within mechanical devices and systems.The computer offers today's designer the possibility of greater stringen

  3. Residential lighting design

    CERN Document Server

    Steffen, Marcus

    2014-01-01

    Good lighting is essential to a building. An effective design is not just about introducing light into a space, but rather an appreciation of how the space will be used. A good lighting design is so intertwined with the building that it is only noticed in its absence. This book introduces the tools of the lighting designer and explains how to produce a lighting design for a home. Looking at the nature of light and introducing different lamps and light fittings available, it explains the basics of lighting design and how to provide atmosphere through the play of light and shadow. It gives room-

  4. MOS integrated circuit design

    CERN Document Server

    Wolfendale, E

    2013-01-01

    MOS Integral Circuit Design aims to help in the design of integrated circuits, especially large-scale ones, using MOS Technology through teaching of techniques, practical applications, and examples. The book covers topics such as design equation and process parameters; MOS static and dynamic circuits; logic design techniques, system partitioning, and layout techniques. Also featured are computer aids such as logic simulation and mask layout, as well as examples on simple MOS design. The text is recommended for electrical engineers who would like to know how to use MOS for integral circuit desi

  5. Serious Game Design Workshop

    OpenAIRE

    Harteveld, C.; Bergh, R.

    2009-01-01

    While human beings are very capable of designing everyday games, it becomes a different story if a more complex game needs to be thought of. The design process is especially complex for games that attempt to be meaningful about a particular aspect of reality. To give the needed experience and the specific knowledge and skills for designing these so-called serious games, the Serious Game Design Workshop was setup. During this hands-on workshop participants work on designing concepts and not on...

  6. DESIGN AND HETEROGENEOUS ENGINEERING:

    DEFF Research Database (Denmark)

    Nickelsen, Niels Christian; Binder, Thomas

    2008-01-01

    This paper seeks a vocabulary to study designers at work. The paper draws on STS studies of scientists and laboratories. A number of studies are explored in order to identify different points of attention in studies of science and in studies of design. It is argued that the notions in actor network...... for a messy middleground between a regime of science with the purpose of information transfer and a regime of design that produces a master narrative of the designer. Being mindful of identities, materials, machines, plans, customers and ideas is held to be the way designers stabilize networks and become...

  7. Wind Turbine Blade Design

    Directory of Open Access Journals (Sweden)

    Richard J. Crossley

    2012-09-01

    Full Text Available A detailed review of the current state-of-art for wind turbine blade design is presented, including theoretical maximum efficiency, propulsion, practical efficiency, HAWT blade design, and blade loads. The review provides a complete picture of wind turbine blade design and shows the dominance of modern turbines almost exclusive use of horizontal axis rotors. The aerodynamic design principles for a modern wind turbine blade are detailed, including blade plan shape/quantity, aerofoil selection and optimal attack angles. A detailed review of design loads on wind turbine blades is offered, describing aerodynamic, gravitational, centrifugal, gyroscopic and operational conditions.

  8. Intuitive analog circuit design

    CERN Document Server

    Thompson, Marc

    2013-01-01

    Intuitive Analog Circuit Design outlines ways of thinking about analog circuits and systems that let you develop a feel for what a good, working analog circuit design should be. This book reflects author Marc Thompson's 30 years of experience designing analog and power electronics circuits and teaching graduate-level analog circuit design, and is the ideal reference for anyone who needs a straightforward introduction to the subject. In this book, Dr. Thompson describes intuitive and ""back-of-the-envelope"" techniques for designing and analyzing analog circuits, including transistor amplifi

  9. Computational valve plate design

    Science.gov (United States)

    Kalbfleisch, Paul

    Axial piston machines are widely used in many industries for their designs compactness, flexibility in power transfer, variable flow rate, and high efficiencies as compared to their manufacturing costs. One important component of all axial piston machines that is a very influential on the performance of the unit is the valve plate. The aim of this research is to develop a design methodology that is general enough to design all types of valve plates and the simple enough not to require advanced technical knowledge from the user. A new style of valve plate designs has been developed that comprehensively considers all previous design techniques and does not require significant changes to the manufacturing processes of valve plates. The design methodology utilizes a previously developed accurate computer model of the physical phenomenon. This allows the precise optimization of the valve plate design through the use of simulations rather than expensive trial and error processes. The design of the valve plate is clarified into the form of an optimization problem. This formulation into an optimization problem has motivated the selection of an optimization algorithm that satisfies the requirements of the design. The proposed design methodology was successfully tested in a case study in the shown to be very successful in improving required performance of the valve plate design.

  10. Ethics and technology design

    DEFF Research Database (Denmark)

    Albrechtslund, Anders

    This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument...... concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillanceenabling technology. I call attention to a “positivist problem” that has to do with the connection between the design context...... of design ethics, is intended as a constructive criticism, which can hopefully contribute to the further development of design ethics....

  11. Ethics and technology design

    DEFF Research Database (Denmark)

    Albrechtslund, Anders

    2007-01-01

    This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument...... concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillance-enabling technology. I call attention to a "positivist problem" that has to do with the connection between the design context...... of design ethics, is intended as a constructive criticism, which can hopefully contribute to the further development of design ethics....

  12. The meaning of "design".

    Science.gov (United States)

    Leslie, J

    2001-12-01

    Our universe obeys elegant laws that permit living beings to evolve. This can suggest divine design. So can fine tuning of physical and cosmological parameters in ways that seem essential to life. Understanding the idea of design is, however, difficult for many reasons. For instance, could a designer be said to "fine tune" through choosing all-dictating laws very carefully? Again, would taking advantage of early quantum indeterminacies be a case of design, or would it be design-destroying interference? Can we speak of "design" if God is not a mind but an abstract Platonic principle? And what if, as Spinoza believed, the structure of our universe is just the structure of divine thinking? If such thinking extended to other universes which were lifeless, could those "exhibit design" simply through being orderly?

  13. Reactor System Design

    International Nuclear Information System (INIS)

    SMART NPP(Nuclear Power Plant) has been developed for duel purpose, electricity generation and energy supply for seawater desalination. The objective of this project IS to design the reactor system of SMART pilot plant(SMART-P) which will be built and operated for the integrated technology verification of SMART. SMART-P is an integral reactor in which primary components of reactor coolant system are enclosed in single pressure vessel without connecting pipes. The major components installed within a vessel includes a core, twelve steam generator cassettes, a low-temperature self pressurizer, twelve control rod drives, and two main coolant pumps. SMART-P reactor system design was categorized to the reactor coe design, fluid system design, reactor mechanical design, major component design and MMIS design. Reactor safety -analysis and performance analysis were performed for developed SMART=P reactor system. Also, the preparation of safety analysis report, and the technical support for licensing acquisition are performed

  14. Sustainability = Good Design

    Directory of Open Access Journals (Sweden)

    Kevin Stelzer

    2006-12-01

    Full Text Available Sustainable design is fundamentally a subset of good design. The description of good design will eventually include criteria for the creation of a healthy environmentand energy efficiency. These goals will be achieved by an emergent paradigm of design practice: integration. At every level design interests will come together to facilitate common goals for the creation of a rewarding present and a healthy future. Interdisciplinary design teams will flourish. Inter-accommodating and fluidly communicating political structures will grow. Coalescing social values and economic forces will propel integrated strategies. Unique and innovative solutions will increasingly become the objective. One eventual outcome of this integrated or sustainable design practice will be the development of buildings that produce more energy than they consume.

  15. PRISM Spectrograph Optical Design

    Science.gov (United States)

    Chipman, Russell A.

    1995-01-01

    The objective of this contract is to explore optical design concepts for the PRISM spectrograph and produce a preliminary optical design. An exciting optical configuration has been developed which will allow both wavelength bands to be imaged onto the same detector array. At present the optical design is only partially complete because PRISM will require a fairly elaborate optical system to meet its specification for throughput (area*solid angle). The most complex part of the design, the spectrograph camera, is complete, providing proof of principle that a feasible design is attainable. This camera requires 3 aspheric mirrors to fit inside the 20x60 cm cross-section package. A complete design with reduced throughput (1/9th) has been prepared. The design documents the optical configuration concept. A suitable dispersing prism material, CdTe, has been identified for the prism spectrograph, after a comparison of many materials.

  16. Teaching engineering design research

    DEFF Research Database (Denmark)

    Blessing, Lucienne; Andreasen, Mogens Myrup

    2005-01-01

    to improve design for centuries, it was not until well in the second half of the 20th century that engineering design became a research topic (see pahl and Beitz (1996), Heymann (2004) for historical overviews). Engineering research, such as research into thermodynamics, mechanics and materials, has a much......The importance og engineering design as an industrial activity, and the increasingly complex and dynamic context in which it takes place, has led to the wish to improve the effectiveness and efficiency of engineering design in practice as well as in education. Although attempts have been made...... by PhD students. This has created the demand for a clear, efficient way of learning the crafmanship of doing design research, a demand which is in strong contrast to the state of design research in general. This article reflects the authors' efforts in running a summer school om engineering design...

  17. Visualization Design Environment

    Energy Technology Data Exchange (ETDEWEB)

    Pomplun, A.R.; Templet, G.J.; Jortner, J.N.; Friesen, J.A.; Schwegel, J.; Hughes, K.R.

    1999-02-01

    Improvements in the performance and capabilities of computer software and hardware system, combined with advances in Internet technologies, have spurred innovative developments in the area of modeling, simulation and visualization. These developments combine to make it possible to create an environment where engineers can design, prototype, analyze, and visualize components in virtual space, saving the time and expenses incurred during numerous design and prototyping iterations. The Visualization Design Centers located at Sandia National Laboratories are facilities built specifically to promote the ''design by team'' concept. This report focuses on designing, developing and deploying this environment by detailing the design of the facility, software infrastructure and hardware systems that comprise this new visualization design environment and describes case studies that document successful application of this environment.

  18. Efficient Learning Design

    DEFF Research Database (Denmark)

    Godsk, Mikkel

    This paper presents the current approach to implementing educational technology with learning design at the Faculty of Science and Technology, Aarhus University, by introducing the concept of ‘efficient learning design’. The underlying hypothesis is that implementing learning design is more than...... perspectives and to consider all these in conjunction in order to obtain a sustainable, efficient learning design. The approach to deploying learning design in terms of the concept of efficient learning design, the catalyst for educational development, i.e. the learning design model and how it is being used...... engaging educators in the design process and developing teaching and learning, it is a shift in educational practice that potentially requires a stakeholder analysis and ultimately a business model for the deployment. What is most important is to balance the institutional, educator, and student...

  19. The Seismographic Design Concept

    DEFF Research Database (Denmark)

    Salamon, Karen Lisa; Engholm, Ida

    2015-01-01

    This article gives an overview of the theoretical development of the design concept through two centuries in Europe and North America. Drawing on the academic disciplines of design history and anthropology, the authors present seminal moments in the theorization of “design”. Historically formative...... roots of modern design theory and academic design studies are traced back to Enlightenment debates and Romanticist discussions about industrial production, craftsmanship and the role of art in society. The history of modern design theory is described in the metaphorical terms of an unstable line...... or seismograph, teetering back and forth between Romanticist and Scientist ideological positions. The gradual marginalization of certain understandings of design, and the inclusion of other understandings formerly external to the design concept’s application range are also addressed. The article conclusively...

  20. Rich Design Research Space

    Directory of Open Access Journals (Sweden)

    Birger Sevaldson

    2008-10-01

    Full Text Available This paper introduces and discusses a Rich Research Space as an inclusive methodological framework and scaffold for research-by-design. The Rich Research Space especially addresses the issue of richness in design processes and design-led research. There is a general trend towards increased complexity in design processes, caused on one hand by the increasing depth and width in the use of design media and methods, and on the other hand by the increasing complexity and interdependency of society due to globalisation. These issues confront the designer-researcher with new challenges. This paper formulates a research strategy for research-by-design in fields that have a high degree of richness in the use of media, the amount of information, and the methods involved. The Rich Research Space concept proposed takes into account the physical, social, and cultural spaces, and the virtual and visual media spaces in which the research-by-design takes place. The concept takes the form of a specific integral approach to design, and a holistic theoretical mindset. It embraces many types of investigation, from analytical to intuitive. The Rich Research Space provides a flexible framework within which the complexity of research-by-design can be interrelated, discussed, and reflected upon. Potentially, it can create a more involved role for the designer-researcher, a role that allows contributions towards the resolution of ever more pressing issues in our society. This approach is currently one of a limited number of possible frameworks that the design professions can utilize in order to make a difference in a world of at times overwhelming complexity. The concept of the Rich Research Space is discussed with reference to an art installation called Barely.Keywords: Research by design, collaborative design, complexity, creativity, research methods.

  1. Preparing design students for strategic design

    DEFF Research Database (Denmark)

    Rasmussen, Jørgen; Schiønning Mortensen, Bo; Geert Jensen, Birgitte

    2012-01-01

    . In both processes the students worked visually with mapping and making sense of large amounts of data that may influence the company’s strategy. They also synthesized these finding by creating conceptual suggestions for the company’s future products. This paper discusses the lessons learned from the...... innovation project and reflects on which new knowledge, methods and techniques designers should be aware of when participating in multidisciplinary strategic processes and new educational initiatives. This paper shows how the design profession’s traditional visual tools and methods for concept development...

  2. Learning for design reuse

    DEFF Research Database (Denmark)

    Duffy, Alex; Duffy, Sandra M.

    1996-01-01

    Over the past decade "design assistance", that is, where the computer is viewed as an Intelligent Design Assistant (IDA), has emerged in knowledge based design support and has formed the basic research strategy for the CAD Cantre, University of Strathclyde, since the mid-1980s. Within this philos......Over the past decade "design assistance", that is, where the computer is viewed as an Intelligent Design Assistant (IDA), has emerged in knowledge based design support and has formed the basic research strategy for the CAD Cantre, University of Strathclyde, since the mid-1980s. Within...... this philosophy, an IDA would act as a colleague to a designer, providing guidance, learning from past experiences, carrying out semi- and fully-automated tasks, explaining its reasoning and in essence complementing the designer's own natural skills, and thus leaving the ultimate decision-making, control......, and responsibility with the designer.The ability to learn and evolve has been recognized as one of the key components of an IDA for it to fully support the designer's activities. Consequently, we have been directing our research effort on two main fronts, formalizing our understanding and developing models...

  3. Icons of Industrial Design

    Directory of Open Access Journals (Sweden)

    Dominika Lušin

    2011-12-01

    Full Text Available An icon of industrial design is a product characterized by its usability and good permanent design and that simultaneously functions as a bearer of a cultural meaning. These meanings do not originate from the product itself, or its aesthetics, shape, or function, but are formed in the context of wider social and cultural processes. Stuart Hall’s “Circuit of Culture” concept is a model for explaining the cultural processes that form a product’s meaning. These processes are representation, identity, production, consumption, and regulation. Design discourses—for example, discourse about the design profession and good design discourse—need to be taken into consideration in order to understand some of the icons of industrial design. A product can have a special meaning merely because it is signed by a famous designer or because it is declared to be an example of good design. This is also a reason why an item can be included in a museum collection. This is a framework to research and to understand icons of industrial design, such as the Thonet chair no. 14, Savoy vase, Vespa, Rex chair, Braun SK 4, Juicy Salif, and design artifacts in general.

  4. Designers' unified cost model

    Science.gov (United States)

    Freeman, W.; Ilcewicz, L.; Swanson, G.; Gutowski, T.

    1992-01-01

    The Structures Technology Program Office (STPO) at NASA LaRC has initiated development of a conceptual and preliminary designers' cost prediction model. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state-of-the-art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a database and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. This paper presents the team members, approach, goals, plans, and progress to date for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

  5. Analog circuit design designing waveform processing circuits

    CERN Document Server

    Feucht, Dennis

    2010-01-01

    The fourth volume in the set Designing Waveform-Processing Circuits builds on the previous 3 volumes and presents a variety of analog non-amplifier circuits, including voltage references, current sources, filters, hysteresis switches and oscilloscope trigger and sweep circuitry, function generation, absolute-value circuits, and peak detectors.

  6. Reusing Design Knowledge Based on Design Cases and Knowledge Map

    Science.gov (United States)

    Yang, Cheng; Liu, Zheng; Wang, Haobai; Shen, Jiaoqi

    2013-01-01

    Design knowledge was reused for innovative design work to support designers with product design knowledge and help designers who lack rich experiences to improve their design capacity and efficiency. First, based on the ontological model of product design knowledge constructed by taxonomy, implicit and explicit knowledge was extracted from some…

  7. Design Languages: A Powerful Medium for Communicating Designs.

    Science.gov (United States)

    Seo, Kay Kyeongju; Gibbons, Andrew S.

    2003-01-01

    Defines design languages as collections of terms that can be used as the primitive words for expressing design sentences. Explains the use of design languages in an instructional design context, including identifying design language terms, design language flexibility, and sharing design languages for cooperative dialogs. (Author/LRW)

  8. Parametrics in Urban Design

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Obeling, Esben

    2013-01-01

    real influence on the process of urban space design. This is due to a number of factors. Lots of money, influence and power is vested in the design of urban space. The classical definition of urban planning as the question of regulating who gets what, where, why, when and how, states this very clearly......The design of urban space has always been contested. Whether imposed by autocratic rulers, emerged as a result of market forces, or implemented as a result of democratic planning processes, urban space design shapes the lives of urban dwellers. Yet rarely does the average urban dweller have any...... the given time and resource limits. And again, the lay person, whether she is a resident, a local business person, or a NGO representative, is left with little influence, when it comes to the design of urban space. With the advent of parametric design tools, this need no longer be the case. Rather than...

  9. Shifting Design Consultancy Identities

    DEFF Research Database (Denmark)

    Larsen, Henry; Huijboom, Nina; Holm Nielsen, Anne

    2014-01-01

    Knowledge-intensive business services, such as design consultancies are perceived as key drivers for innovation and competitiveness. However, many designers create their own companies, which often remain as one-man companies. By interviewing designers who own small design firms we found patterns...... and identities that resonate more with freelancing and portfolio careers than with the intention of creating firms that are intended to expand. We recognized a pattern where freelancers build up their work as a portfolio by moving from one engagement to another, a process that we will call sequential freelancing...... on design for innovation as a strategy for growth might well benefit if they understand that other companies in their municipality can grow if they actively support designers and help them develop their networking capabilities....

  10. Computational Protein Design

    DEFF Research Database (Denmark)

    Johansson, Kristoffer Enøe

    Proteins are the major functional group of molecules in biology. The impact of protein science on medicine and chemical productions is rapidly increasing. However, the greatest potential remains to be realized. The fi eld of protein design has advanced computational modeling from a tool of support...... to a central method that enables new developments. For example, novel enzymes with functions not found in natural proteins have been de novo designed to give enough activity for experimental optimization. This thesis presents the current state-of-the-art within computational design methods together...... with a novel method based on probability theory. With the aim of assembling a complete pipeline for protein design, this work touches upon several aspects of protein design. The presented work is the computational half of a design project where the other half is dedicated to the experimental part...

  11. Greener by design.

    Science.gov (United States)

    Diwekar, Urmila M

    2003-12-01

    Process simulation models and other design tools allow engineers to design, simulate, and optimize chemical processes. However, there is a critical need to incorporate green engineering into the design of these processes. This calls for extending the breadth of the design process. This paper presents an integrated framework for greener design. The framework starts the decision-making as early as the chemical and material selection stage and also includes management and planning decisions. The design goal is not restricted to profitability, but environmental and ecological objectives are also added. However, this integration poses challenging problem of discrete and continuous decisions, nonlinear models, and uncertainties. Furthermore, there are multiple and conflicting objectives to be considered. Therefore, the core of this integrated framework is the efficient algorithmic framework for multiobjective optimization under uncertainty. Two real world case studies are presented that illustrate the promise of such a framework.

  12. What about Design Newness?

    DEFF Research Database (Denmark)

    Talke, Katrin; Salomo, Søren; Wieringa, Jaap E.;

    2009-01-01

    an argument for why design newness should be considered as a dimension of product innovativeness. In addition to providing conceptual rationale, empirical evidence is offered on the influence of design newness on sales performance across a product's life cycle. To be able to put the findings into perspective......, the performance effects of design newness are compared with those of technical newness. As several products exemplify that design newness and technical newness can go hand in hand, not only direct performance effects but also interaction effects between both newness dimensions are investigated. The arguments...... and objective sales data over time are accessible. The results emphasize that both design and technical newness are important drivers of car sales. However, the effects differ widely across the product life cycle. While design newness has a positive impact right after the introduction and persists in strength...

  13. Innovation without Design?

    DEFF Research Database (Denmark)

    Pinheiro-Croisel, Rebecca; Hernes, Tor

    2012-01-01

    This paper explores innovation and social behaviourist theory in relation to sustainable urban projects in the highly institutionalized public sector (towns). Using empirical data from France, we examine the dynamics of a design process in which unexpected practices generated innovative urban...... design. We show how the fact that the design process did not follow the standard phases of planning meant that the actors redefined themselves in relation to one another. We point out how the absence of urban design plans during a precise phase of an innovative design process drew the actors...... into a movement of collective action, which presupposed the acquisition of a new identity. Ultimately, our objective is to combine social behaviourist theory and innovation theory and to facilitate innovative design in urban projects....

  14. Nuclear reactor design

    CERN Document Server

    2014-01-01

    This book focuses on core design and methods for design and analysis. It is based on advances made in nuclear power utilization and computational methods over the past 40 years, covering core design of boiling water reactors and pressurized water reactors, as well as fast reactors and high-temperature gas-cooled reactors. The objectives of this book are to help graduate and advanced undergraduate students to understand core design and analysis, and to serve as a background reference for engineers actively working in light water reactors. Methodologies for core design and analysis, together with physical descriptions, are emphasized. The book also covers coupled thermal hydraulic core calculations, plant dynamics, and safety analysis, allowing readers to understand core design in relation to plant control and safety.

  15. Rigorous System Design

    OpenAIRE

    Sifakis, Joseph

    2012-01-01

    The monograph advocates rigorous system design as a coherent and accountable model-based process leading from requirements to correct implementations. It presents the current state of the art in system design, discusses its limitations, and identifies possible avenues for overcoming them. A rigorous system design flow is defined as a formal accountable and iterative process composed of steps, and based on four principles: (1) separation of concerns; (2) component-based construction; (3) sema...

  16. Learning Python design patterns

    CERN Document Server

    Zlobin, Gennadiy

    2013-01-01

    This book takes a tutorial-based and user-friendly approach to covering Python design patterns. Its concise presentation means that in a short space of time, you will get a good introduction to various design patterns.If you are an intermediate level Python user, this book is for you. Prior knowledge of Python programming is essential. Some knowledge of UML is also required to understand the UML diagrams which are used to describe some design patterns.

  17. Introduction to logic design

    CERN Document Server

    Yanushkevich, Svetlana N

    2008-01-01

    Preface Design Process and Technology Theory of logic design Analysis and synthesis Implementation technologies Predictable technologies Contemporary CAD of logic networks Number Systems Positional numbers Counting in a positional number system Basic arithmetic operations in various number systems Binary arithmetic Radix-complement representations Techniques for conversion of numbers in various radices Overflow Residue arithmetic Other binary codes Redundancy and reliability Graphical Data Structures Graphs in discrete devices and systems design Basic definitions T

  18. Design of hovercraft

    OpenAIRE

    Lhotský, Marek

    2012-01-01

    The Diploma thesis is dedicated to design of a hovercraft. The concept of design is a small hovercraft for personal use. The hovercraft is styled into a sports category. The interior is designed for 4 persons and personal luggage. Main part of the work is the exterior of the hovercraft. But it contains also a basic vision of interior solution with basic dimensions according to antropometric measures and other ergonomical criteria. So the result is original hovercraft, which is solved in area ...

  19. Information System Design

    OpenAIRE

    Sedlák, Marek

    2016-01-01

    The diploma thesis focuses on design of the information system for the department of medical transport service, which is part of the hospital. This thesis describes the theoretical knowledge necessary for analysis and custom design, is also concerned with the analysis of the current state of processes and information system. Last but not least, based on the analysis and the requirements lays down suggestions for improvement of the information system and design of optimal information system, t...

  20. Designing A Conventional Aircraft

    OpenAIRE

    Sonei, Arash

    2014-01-01

    This paper is explaining the important design phases of dimensioning an unmanned conventional aircraft from scratch and will also design one according to a few chosen requirements. The design phases discussed will be all from wing dimensioning to stability and spin recovery, aircraft performance requirements and how to select a motor which overcomes these. As well as the optimal rate of climb for improved efficiency is discussed. In the end an aircraft which manages the set requirements and i...

  1. Schematically disruptive game design

    OpenAIRE

    Howell, Peter

    2011-01-01

    Many games focus their resources at satiating player ‘needs’, and meeting perceived expectations that players have of how games should behave and of what constitutes enjoyable, gratifying gameplay. This paper outlines an alternate position on game design – one which focuses on disrupting these expectations, on designing games that players cannot succeed in simply by relying on their pre-acquired gameplay experiences. A critique of current game design trends is offered, and possible future out...

  2. Logical database design principles

    CERN Document Server

    Garmany, John; Clark, Terry

    2005-01-01

    INTRODUCTION TO LOGICAL DATABASE DESIGNUnderstanding a Database Database Architectures Relational Databases Creating the Database System Development Life Cycle (SDLC)Systems Planning: Assessment and Feasibility System Analysis: RequirementsSystem Analysis: Requirements Checklist Models Tracking and Schedules Design Modeling Functional Decomposition DiagramData Flow Diagrams Data Dictionary Logical Structures and Decision Trees System Design: LogicalSYSTEM DESIGN AND IMPLEMENTATION The ER ApproachEntities and Entity Types Attribute Domains AttributesSet-Valued AttributesWeak Entities Constraint

  3. Design for Additive Manufacturing

    OpenAIRE

    Bertran Comellas, Martí

    2012-01-01

    This Thesis, Design for Additive Manufacturing, has been mainly focused on the design process and the considerations to be taken into account when designing parts for Additive Manufacturing. It starts with an introduction to Additive Manufacturing, the different technologies and processes are described to let the readers understand their operating principle, materials used and their strengths and weaknesses. The applications of Additive manufacturing are also explained in the introductory ...

  4. Heat exchanger design

    OpenAIRE

    Loukota, Martin

    2014-01-01

    This bachelor thesis solves design of a heat exchanger for hot water boiler with gasification chamber for preheating the combustion air with the heat of the combustion products. Calculation values were experimentally measured. Thesis contains brief description of the shell and tube heat exchanger, stoichiometric combustion calculation, geometrical dimensions design of the heat exchanger, pressure loss and thermal performance calculation. It also includes drawings of the designed exchanger.

  5. Designing an Educational Game

    DEFF Research Database (Denmark)

    Bjørner, Thomas; Hansen, Charina Benedikte Søgaard

    2010-01-01

    ’ skill to control and solve the given task. In this paper we suggest three different perspectives that need to be communicated across in order to design a useful educational game: teachers, pupils and game designers. It is our intention with this paper to suggest some design principles for educational...... engage both pupils and teachers, and the interplay between game play, pupils and teachers creates some dynamic learning opportunities....

  6. Creating flat design websites

    CERN Document Server

    Pratas, Antonio

    2014-01-01

    This book contains practical, step-by-step tutorials along with plenty of explanation about designing your flat website. Each section is introduced sequentially, building up your web design skills and completing your website.Creating Flat Design Websites is ideal for you if you are starting on your web development journey, but this book will also benefit seasoned developers wanting to start developing in flat.

  7. Propeller design by optimization

    Science.gov (United States)

    Rizk, M. H.; Jou, W.-H.

    1986-01-01

    The feasibility of designing propellers by an optimization procedure is investigated. A scheme, which solves the full potential flow equation about a propeller by line relaxation, is modified so that the iterative solutions of the flow equation and the design parameters are updated simultaneously. Some technical problems in using optimization for designing propellers with maximum efficiency are identified. Approaches for overcoming these problems are presented.

  8. Design informací

    OpenAIRE

    Herch, Jan

    2011-01-01

    This thesis focuses on the information design in business intelligence. It combines cognitive psychology, graphic design and information design to equip the reader with information and skills to create effective reports and dashboards. The paper presents not only theory but also explains their principles. In the practical part of the theoretical knowledge is applied in practice on a sample dashboard that corrects the current solution imaginary company Alfa Kampeny. Although the work is primar...

  9. Magnetic shielding design analysis

    International Nuclear Information System (INIS)

    Two passive magnetic-shielding-design approaches for static external fields are reviewed. The first approach uses the shielding solutions for spheres and cylinders while the second approach requires solving Maxwell's equations. Experimental data taken at LLNL are compared with the results from these shieldings-design methods, and improvements are recommended for the second method. Design considerations are discussed here along with the importance of material gaps in the shield

  10. Designing Instructional Systems

    Science.gov (United States)

    Furtado, Lorraine T.

    1974-01-01

    The author presents an instructional design model for teachers that evolves around a teacher-manager concept which recognizes management functions of: planning, organizing, leading, and controlling. (EA)

  11. Clockwork game design

    CERN Document Server

    Burgun, Keith

    2015-01-01

    Only by finding and focusing on a core mechanism can you further your pursuit of elegance in strategy game design.Clockwork Game Design is the most functional and directly applicable theory for game design. It details the clockwork game design pattern, which focuses on building around fundamental functionality. You can then use this understanding to prescribe a system for building and refining your rulesets. A game can achieve clarity of purpose by starting with a strong core, then removing elements that conflict with that core while adding elements that support it.Filled with examples and exe

  12. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A; Parisher

    2000-01-01

    Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

  13. ECOLOGICAL BUILDING DESIGN DETERMINANTS

    Directory of Open Access Journals (Sweden)

    Ali Vakili-Ardebili

    2010-11-01

    Full Text Available The sustainable building design process is driven on the basis of a range of design eco-indicators. Consideration of a multitude of eco-determinants, such as environment, economy, resources, energy consumption and society values in addition to design characteristics and contexts, makes the process of ecological design even more complex. A large number of eco-drivers are extracted from the literature and current design practices. To gain a better insight on eco-design determinants, a survey focusing on the use of eco-design drivers has been conducted with various architects in the UK. The factor analysis method was used to remove redundant data from the survey. Through the factor analysis approach, 115 eco-determinants are grouped into six main clusters. This article presents the process, analysis and findings of this work. The extracted eco-indicators and their associated clusters can be used to improve the process of ecological building design. DOI: 10.3763/aedm.2008.0096 Source: Architectural Engineering and Design Management, Volume 6, Number 2, 2010 , pp. 111-131(21

  14. Sustainable Housing Design

    DEFF Research Database (Denmark)

    Lauring, Gert Michael

    2016-01-01

    in detached houses typically situated in less dense suburbia neighborhood to achieve safety and green space for kids to play and socialize. Thus, if one wants to realistically solve the issue of sustainable housing design one must address the intertwined aspects of building construction, urban density......When designing sustainable housing, energy optimization and subsequently satisfactory indoor climates are central issues that need to be incorporated from early design phases if to reach a coherent design. At the same time it might be argued that energy used for running modern buildings only plays...

  15. Nanomaterials design and simulation

    CERN Document Server

    Balbuena, Perla

    2006-01-01

    Over the past few decades, several approaches have been developed for designing nano-structured or molecularly-structured materials. These advances have revolutionized practically all fields of science and engineering, providing an additional design variable, the feature size of the nano-structures, which can be tailored to provide new materials with very special characteristics. Nanomaterials: Design and Simulation explores the role that such advances have made toward a rational design of nanostructures and covers a variety of methods from ab initio electronic structure techniques, ab initio

  16. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  17. MicroCMOS design

    CERN Document Server

    Song, Bang-Sup

    2011-01-01

    MicroCMOS Design covers key analog design methodologies with an emphasis on analog systems that can be integrated into systems-on-chip (SoCs). Starting at the transistor level, this book introduces basic concepts in the design of system-level complementary metal-oxide semiconductors (CMOS). It uses practical examples to illustrate circuit construction so that readers can develop an intuitive understanding rather than just assimilate the usual conventional analytical knowledge. As SoCs become increasingly complex, analog/radio frequency (RF) system designers have to master both system- and tran

  18. EMI filter design

    CERN Document Server

    Ozenbaugh, Richard Lee

    2011-01-01

    With today's electrical and electronics systems requiring increased levels of performance and reliability, the design of robust EMI filters plays a critical role in EMC compliance. Using a mix of practical methods and theoretical analysis, EMI Filter Design, Third Edition presents both a hands-on and academic approach to the design of EMI filters and the selection of components values. The design approaches covered include matrix methods using table data and the use of Fourier analysis, Laplace transforms, and transfer function realization of LC structures. This edition has been fully revised

  19. Transforming shape in design

    DEFF Research Database (Denmark)

    Prats, Miquel; Lim, Sungwoo; Jowers, Iestyn;

    2009-01-01

    This paper is concerned with how design shapes are generated and explored by means of sketching. It presents research into the way designers transform shapes from one state to another using sketch representations. An experimental investigation of the sketching processes of designers is presented....... Connections between sketches are defined in terms of shape transformations and described according to shape rules. These rules provide a formal description of the shape exploration process and develop understanding of the mechanics of sketching in design. The paper concludes by discussing the important...

  20. Head First Web Design

    CERN Document Server

    Watrall, Ethan

    2008-01-01

    Want to know how to make your pages look beautiful, communicate your message effectively, guide visitors through your website with ease, and get everything approved by the accessibility and usability police at the same time? Head First Web Design is your ticket to mastering all of these complex topics, and understanding what's really going on in the world of web design. Whether you're building a personal blog or a corporate website, there's a lot more to web design than div's and CSS selectors, but what do you really need to know? With this book, you'll learn the secrets of designing effecti