WorldWideScience

Sample records for bioactive nanofibers instruct

  1. Antibacterial polylactic acid/chitosan nanofibers decorated with bioactive glass

    Energy Technology Data Exchange (ETDEWEB)

    Goh, Yi-fan; Akram, Muhammad; Alshemary, Ammarz [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor (Malaysia); Hussain, Rafaqat, E-mail: rafaqat@comsats.edu.pk [Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan)

    2016-11-30

    Highlights: • PLA/Chitosan nanofibers were coated with functional bioglass. • Polymer/ceramic composite fibers exhibited good in-vitro bioactivity. • Nanofibers coated with Ag doped bioglass exhibited good antibacterial activity. - Abstract: In this study, we have presented the structural and in vitro characterization of electrospun polylactic acid (PLA)/Chitosan nanofibers coated with cerium, copper or silver doped bioactive glasses (CeBG/CuBG/AgBG). Bead-free, smooth surfaced nanofibers were successfully prepared by using electrospinning technique. The nanocomposite fibers were obtained using a facile dip-coating method, their antibacterial activities against E. coliE. coli (ATCC 25922 strains) were measured by the disk diffusion method after 24 h of incubation at 37 °C. CeBG and CuBG decorated PLA/Chitosan nanofibers did not develop an inhibition zone against the bacteria. On the other hand, nanofibers coated with AgBG developed an inhibition zone against the bacteria. The as-prepared nanocomposite fibers were immersed in SBF for 1, 3 and 7 days in Simulated Body Fluid (SBF) for evaluation of in vitro bioactivity. All samples induced the formation of crystallites with roughly ruffled morphology and the pores of fibers were covered with the extensive growth of crystallites. Energy Dispersive X-ray (EDX) composition analysis showed that the crystallites possessed Ca/P ratio close to 1.67, confirming the good in-vitro bioactivity of the fibers.

  2. Bioactive thermoresponsive polyblend nanofiber formulations for wound healing

    Energy Technology Data Exchange (ETDEWEB)

    Pawar, Mahesh D. [Polymer Science and Engineering, National Chemical Laboratory, Homi Bhabha Road, Pashan, Pune 411008 (India); MAEER' s Maharashtra Institute of Pharmacy S. No. 124, MIT Campus Paud Road, Kothrud, Pune 411 038 (India); Rathna, G.V.N., E-mail: rv.gundloori@ncl.res.in [Polymer Science and Engineering, National Chemical Laboratory, Homi Bhabha Road, Pashan, Pune 411008 (India); Agrawal, Shubhang [Polymer Science and Engineering, National Chemical Laboratory, Homi Bhabha Road, Pashan, Pune 411008 (India); Kuchekar, Bhanudas S. [MAEER' s Maharashtra Institute of Pharmacy S. No. 124, MIT Campus Paud Road, Kothrud, Pune 411 038 (India)

    2015-03-01

    The rationale of this work is to develop new bioactive thermoresponsive polyblend nanofiber formulations for wound healing (topical). Various polymer compositions of thermoresponsive, poly(N-isopropylacrylamide), egg albumen and poly(ε-caprolactone) blend solutions with and without a drug [gatifloxacin hydrochloride, Gati] were prepared. Non-woven nanofibers of various compositions were fabricated using an electrospinning technique. The morphology of the nanofibers was analyzed by an environmental scanning electron microscope. The morphology was influenced by the concentration of polymer, drug, and polymer blend composition. Fourier transform infrared spectroscopy analysis showed the shift in bands due to hydrogen ion interactions between polymers and drug. Thermogram of PNIPAM/PCL/EA with Gati recorded a shift in lower critical solution temperature (LCST) and glass transition temperature (T{sub g}) of PNIPAM. Similarly T{sub g} and melting temperature (T{sub m}) of PCL were shifted. X-ray diffraction patterns recorded a decrease in the crystalline state of PCL nanofibers and transformed crystalline drug to an amorphous state. In vitro release study of nanofibers with Gati showed initial rapid release up to 10 h, followed by slow and controlled release for 696 h (29 days). Nanofiber mats with Gati exhibited antibacterial properties to Staphylococcus aureus, supported suitable controlled drug release with in vitro cell viability and in vivo wound healing. - Highlights: • Thermoresponsive and bioactive nanofiber blends of PNIPAM/EA/PCL were fabricated. • Nanofiber blends favored initial rapid release, followed by controlled release. • In vitro cell viability of pure polymers and nanofiber blends was least toxic. • In vivo studies of drug loaded nanofiber mats recorded faster tissue regeneration.

  3. Antibacterial polylactic acid/chitosan nanofibers decorated with bioactive glass

    Science.gov (United States)

    Goh, Yi-fan; Akram, Muhammad; Alshemary, Ammarz; Hussain, Rafaqat

    2016-11-01

    In this study, we have presented the structural and in vitro characterization of electrospun polylactic acid (PLA)/Chitosan nanofibers coated with cerium, copper or silver doped bioactive glasses (CeBG/CuBG/AgBG). Bead-free, smooth surfaced nanofibers were successfully prepared by using electrospinning technique. The nanocomposite fibers were obtained using a facile dip-coating method, their antibacterial activities against E. coliE. coli (ATCC 25922 strains) were measured by the disk diffusion method after 24 h of incubation at 37 °C. CeBG and CuBG decorated PLA/Chitosan nanofibers did not develop an inhibition zone against the bacteria. On the other hand, nanofibers coated with AgBG developed an inhibition zone against the bacteria. The as-prepared nanocomposite fibers were immersed in SBF for 1, 3 and 7 days in Simulated Body Fluid (SBF) for evaluation of in vitro bioactivity. All samples induced the formation of crystallites with roughly ruffled morphology and the pores of fibers were covered with the extensive growth of crystallites. Energy Dispersive X-ray (EDX) composition analysis showed that the crystallites possessed Ca/P ratio close to 1.67, confirming the good in-vitro bioactivity of the fibers.

  4. Optically Monitoring Mineralization and Demineralization on Photoluminescent Bioactive Nanofibers.

    Science.gov (United States)

    Li, Xiang; Li, Yangyang; Chen, Xiaoyi; Li, Binbin; Gao, Bo; Ren, Zhaohui; Han, Gaorong; Mao, Chuanbin

    2016-04-05

    Bone regeneration and scaffold degradation do not usually follow the same rate, representing a daunting challenge in bone repair. Toward this end, we propose to use an external field such as light (in particular, a tissue-penetrating near-infrared light) to precisely monitor the degradation of the mineralized scaffold (demineralization) and the formation of apatite mineral (mineralization). Herein, CaTiO3:Yb(3+),Er(3+)@bioactive glass (CaTiO3:Yb(3+),Er(3+)@BG) nanofibers with upconversion (UC) photoluminescence (PL) were synthesized. Such nanofibers are biocompatible and can emit green and red light under 980 nm excitation. The UC PL intensity is quenched during the bone-like apatite formation on the surface of the nanofibers in simulated body fluid; more mineral formation on the nanofibers induces more rapid optical quenching of the UC PL. Furthermore, the quenched UC PL can recover back to its original magnitude when the apatite on the nanofibers is degraded. Our work suggests that it is possible to optically monitor the apatite mineralization and demineralization on the surface of nanofibers used in bone repair.

  5. Controlled Bioactive Molecules Delivery Strategies for Tendon and Ligament Tissue Engineering using Polymeric Nanofibers.

    Science.gov (United States)

    Hiong Teh, Thomas Kok; Hong Goh, James Cho; Toh, Siew Lok

    2015-01-01

    The interest in polymeric nanofibers has escalated over the past decade given its promise as tissue engineering scaffolds that can mimic the nanoscale structure of the native extracellular matrix. With functionalization of the polymeric nanofibers using bioactive molecules, localized signaling moieties can be established for the attached cells, to stimulate desired biological effects and direct cellular or tissue response. The inherently high surface area per unit mass of polymeric nanofibers can enhance cell adhesion, bioactive molecules loading and release efficiencies, and mass transfer properties. In this review article, the application of polymeric nanofibers for controlled bioactive molecules delivery will be discussed, with a focus on tendon and ligament tissue engineering. Various polymeric materials of different mechanical and degradation properties will be presented along with the nanofiber fabrication techniques explored. The bioactive molecules of interest for tendon and ligament tissue engineering, including growth factors and small molecules, will also be reviewed and compared in terms of their nanofiber incorporation strategies and release profiles. This article will also highlight and compare various innovative strategies to control the release of bioactive molecules spatiotemporally and explore an emerging tissue engineering strategy involving controlled multiple bioactive molecules sequential release. Finally, the review article concludes with challenges and future trends in the innovation and development of bioactive molecules delivery using polymeric nanofibers for tendon and ligament tissue engineering.

  6. Bioactive Glass Nanoparticles-Loaded Poly(ɛ-caprolactone Nanofiber as Substrate for ARPE-19 Cells

    Directory of Open Access Journals (Sweden)

    Tadeu Henrique Lima

    2016-01-01

    Full Text Available Bioactive glass nanoparticles-loaded poly(ɛ-caprolactone nanofibers (BIOG PCL nanofibers were synthesized and evaluated as substrates for ocular cells (ARPE-19. BIOG PCL nanofibers were characterized using SEM, FTIR, and DSC, and the in vitro degradation profile was also investigated. The in vitro ocular biocompatibility of nanofibers was exploited in Müller glial cells (MIO-M1 cells and in chorioallantoic membrane (CAM; and the proliferative capacity, cytotoxicity, and functionality were evaluated. Finally, ARPE-19 cells were seeded onto BIOG PCL nanofibers and they were investigated as supports for in vitro cell adhesion and proliferation. SEM images revealed the incorporation of BIOG nanoparticles into PCL nanofibers. Nanoparticles did not induce modifications in the chemical structure and semicrystalline nature of PCL in the nanofiber, as shown by FTIR and DSC. MIO-M1 cells exposed to BIOG PCL nanofibers showed viability, and they were able to proliferate and to express GFAP, indicating cellular functionality. Moreover, nanofibers were well tolerated by CAM. These findings suggested the in vitro ocular biocompatibility and absence of toxicity of these nanofibers. Finally, the BIOG nanoparticles modulated the protein adsorption, and, subsequently, ARPE-19 cells adhered and proliferated onto the nanostructured supports, establishing cell-substrate interactions. In conclusion, the biodegradable and biocompatible BIOG PCL nanofibers supported the ARPE-19 cells.

  7. Core-shell nanofibers: Integrating the bioactivity of gelatin and the mechanical property of polyvinyl alcohol.

    Science.gov (United States)

    Merkle, Valerie M; Zeng, Like; Slepian, Marvin J; Wu, Xiaoyi

    2014-04-01

    Coaxial electrospinning is used to fabricate nanofibers with gelatin in the shell and polyvinyl alcohol (PVA) in the core in order to derive mechanical strength from PVA and bioactivity from gelatin. At a 1:1 PVA/gelatin mass ratio, the core-shell nanofiber scaffolds display a Young's modulus of 168.6 ± 36.5 MPa and a tensile strength of 5.42 ± 1.95 MPa, which are significantly higher than those of the scaffolds composed solely of gelatin or PVA. The Young's modulus and tensile strength of the core-shell nanofibers are further improved by reducing the PVA/gelatin mass ratio from 1:1 to 1:3. The mechanical analysis of the core-shell nanofibers suggests that the presence of the gelatin shell may improve the molecular alignment of the PVA core, transforming the semi-crystalline, plastic PVA into a more crystallized, elastic PVA, and enhancing the mechanical properties of the core. Lastly, the PVA/gelatin core-shell nanofibers possess cellular viability, proliferation, and adhesion similar to these of the gelatin nanofibers, and show significantly higher proliferation and adhesion than the PVA nanofibers. Taken together, the coaxial electrospinning of nanofibers with a core-shell structure permits integration of the bioactivity of gelatin and the mechanical strength of PVA in single fibers.

  8. Production of Nanofibers Containing the Bioactive Compound C-Phycocyanin.

    Science.gov (United States)

    Figueira, Felipe da Silva; Gettens, Juliana Garcia; Costa, Jorge Alberto Vieira; de Morais, Michele Greque; Moraes, Caroline Costa; Kalil, Susana Juliano

    2016-01-01

    C-phycocyanin (C-PC) is a water-soluble phycobiliprotein present in light-harvesting antenna system of cyanobacteria. The nanostructures have not been widely evaluated, precluding improvements in stability and application of the C-PC. Electrospun nanofibers have an extremely high specific surface area due to their small diameter, they can be produced from a wide variety of polymers, and they are successfully evaluated to increase the efficacy of antitumor drugs. The incorporation of C-PC into nanofibers would allow investigations of potential uses in alternative cancer treatments and tissue engineering scaffolds. In this paper, C-phycocyanin were incorporated into the polymer polyethylene oxide (PEO) in various concentrations for nanofiber production via an electrospinning process. Nanofibers structures were analyzed using digital optical microscopy and scanning electron microscopy (SEM). Thermogravimetric analysis was performed on the pure starting compounds and the produced nanofibers. At a concentration of 2% (w/w) of PEO, nanofibers were not produced, and concentrations of 4% (w/w) of PEO failed to produce nanofibers of good quality. Solutions with 6% (w/w) PEO, 6% (w/w) PEO plus 1% (w/w) NaCI, and 8% (w/w) PEO promote the formation of bluish, homogeneous and bead-free nanofibers with average diameters varying between 542.1 and 759.9 nm, as evaluated by optical microscopy. SEM analysis showed that nanofibers produced from polymer solutions containing 6% (w/w) PEO, 1% (w/w) NaCl and 3% (w/w) C-PC have an average diameter of 295 nm. Thermogravimetric analysis detected an increase in thermal resistance with the incorporation of C-phycocyanin into nanofibers.

  9. A simple approach for synthesis, characterization and bioactivity of bovine bones to fabricate the polyurethane nanofiber containing hydroxyapatite nanoparticles

    Directory of Open Access Journals (Sweden)

    F. A. Sheikh

    2012-01-01

    Full Text Available In the present study, we had introduced polyurethane (PU nanofibers that contain hydroxyapatite (HAp nanoparticles (NPs as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in various nano-biotechnological fields have been studied; for instance, the bioactivity of the produced nanofiber mats was investigated while incubating in simulated body fluid (SBF. The results from incubation of nanofibers, indicated that incorporation of HAp strongly activates the precipitation of the apatite-like particles, because of the HAp NPs act as seed, that accelerate crystallization of the biological HAp from the utilized SBF.

  10. A simple approach for synthesis, characterization and bioactivity of bovine bones to fabricate the polyurethane nanofiber containing hydroxyapatite nanoparticles.

    Science.gov (United States)

    Sheikh, F A; Kanjwal, M A; Macossay, J; Barakat, N A M; Kim, H Y

    2012-01-01

    In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in various nano-biotechnological fields have been studied; for instance, the bioactivity of the produced nanofiber mats was investigated while incubating in simulated body fluid (SBF). The results from incubation of nanofibers, indicated that incorporation of HAp strongly activates the precipitation of the apatite-like particles, because of the HAp NPs act as seed, that accelerate crystallization of the biological HAp from the utilized SBF.

  11. Functional 3-D cardiac co-culture model using bioactive chitosan nanofiber scaffolds.

    Science.gov (United States)

    Hussain, Ali; Collins, George; Yip, Derek; Cho, Cheul H

    2013-02-01

    The in vitro generation of a three-dimensional (3-D) myocardial tissue-like construct employing cells, biomaterials, and biomolecules is a promising strategy in cardiac tissue regeneration, drug testing, and tissue engineering applications. Despite significant progress in this field, current cardiac tissue models are not yet able to stably maintain functional characteristics of cardiomyocytes for long-term culture and therapeutic purposes. The objective of this study was to fabricate bioactive 3-D chitosan nanofiber scaffolds using an electrospinning technique and exploring its potential for long-term cardiac function in the 3-D co-culture model. Chitosan is a natural polysaccharide biomaterial that is biocompatible, biodegradable, non-toxic, and cost effective. Electrospun chitosan was utilized to provide structural scaffolding characterized by scale and architectural resemblance to the extracellular matrix (ECM) in vivo. The chitosan fibers were coated with fibronectin via adsorption in order to enhance cellular adhesion to the fibers and migration into the interfibrous milieu. Ventricular cardiomyocytes were harvested from neonatal rats and studied in various culture conditions (i.e., mono- and co-cultures) for their viability and function. Cellular morphology and functionality were examined using immunofluorescent staining for alpha-sarcomeric actin (SM-actin) and gap junction protein, Connexin-43 (Cx43). Scanning electron microscopy (SEM) and light microscopy were used to investigate cellular morphology, spatial organization, and contractions. Calcium indicator was used to monitor calcium ion flux of beating cardiomyocytes. The results demonstrate that the chitosan nanofibers retained their cylindrical morphology in long-term cell cultures and exhibited good cellular attachment and spreading in the presence of adhesion molecule, fibronectin. Cardiomyocyte mono-cultures resulted in loss of cardiomyocyte polarity and islands of non-coherent contractions. However

  12. PLLA-PEG-TCH-labeled bioactive molecule nanofibers for tissue engineering

    Directory of Open Access Journals (Sweden)

    Chen J

    2011-10-01

    Full Text Available Jun Chen1,2, Beth Zhou1–3, Qi Li1,2, Jun Ouyang4, Jiming Kong2,4,5, Wen Zhong3,6, Malcolm MQ Xing1,2,4,71Department of Mechanical Engineering, Faculty of Engineering, University of Manitoba, Winnipeg, MB, Canada; 2Manitoba Institute of Child Health, Winnipeg, MB, Canada; 3Department of Textile Sciences, Faculty of Human Ecology, University of Manitoba, Winnipeg, MB, Canada; 4School of Basic Medical Science, Southern Medical University, Guangzhoug, China; 5Department of Human Anatomy and Cell Sciences, 6Department of Medical Microbiology, Faculty of Medicine, 7Department of Biochemistry and Medical Genetics, Faculty of Medicine, University of Manitoba, Winnipeg, MB, CanadaAbstract: By mimicking the native extracellular matrix, electrospun nanofibrous scaffolds (ENSs can provide both chemical and physical cues to modulate cell adherence and differentiation and to promote tissue regeneration while retaining bioresorbable and biocompatible properties. In this study, ENSs were developed to deliver multiple biomolecules by loading them into the core-sheath structure and/or by conjugating them to the nanofiber surfaces. In this work, poly(L-lactide-poly(ethylene glycol-NH2 and poly(L-lactide were emulsion electrospun into nanofibers with a core-sheath structure. A model drug, tetracycline hydrochloride, was loaded within the nanofibers. Amino and carboxyl reactive groups were then activated on the fiber surfaces using saturated water vapor exposure and base hydrolysis, respectively. These reactive groups allowed the surface of the ENS to be functionalized with two other bioactive molecules, fluorescein isothiocyanate- and rhodamine-labeled bovine serum albumins, which were used as model proteins. The ENSs were shown to retain their antimicrobial capacity after two functionalization reactions, indicating that multifunctional nanofibers can potentially be developed into functional wound dressings or periodontal membranes or used in more complicated

  13. Cell studies of hybridized carbon nanofibers containing bioactive glass nanoparticles using bone mesenchymal stromal cells

    Science.gov (United States)

    Zhang, Xiu-Rui; Hu, Xiao-Qing; Jia, Xiao-Long; Yang, Li-Ka; Meng, Qing-Yang; Shi, Yuan-Yuan; Zhang, Zheng-Zheng; Cai, Qing; Ao, Yin-Fang; Yang, Xiao-Ping

    2016-12-01

    Bone regeneration required suitable scaffolding materials to support the proliferation and osteogenic differentiation of bone-related cells. In this study, a kind of hybridized nanofibrous scaffold material (CNF/BG) was prepared by incorporating bioactive glass (BG) nanoparticles into carbon nanofibers (CNF) via the combination of BG sol-gel and polyacrylonitrile (PAN) electrospinning, followed by carbonization. Three types (49 s, 68 s and 86 s) of BG nanoparticles were incorporated. To understand the mechanism of CNF/BG hybrids exerting osteogenic effects, bone marrow mesenchymal stromal cells (BMSCs) were cultured directly on these hybrids (contact culture) or cultured in transwell chambers in the presence of these materials (non-contact culture). The contributions of ion release and contact effect on cell proliferation and osteogenic differentiation were able to be correlated. It was found that the ionic dissolution products had limited effect on cell proliferation, while they were able to enhance osteogenic differentiation of BMSCs in comparison with pure CNF. Differently, the proliferation and osteogenic differentiation were both significantly promoted in the contact culture. In both cases, CNF/BG(68 s) showed the strongest ability in influencing cell behaviors due to its fastest release rate of soluble silicium-relating ions. The synergistic effect of CNF and BG would make CNF/BG hybrids promising substrates for bone repairing.

  14. Multifunctional and biomimetic fish collagen/bioactive glass nanofibers: fabrication, antibacterial activity and inducing skin regeneration in vitro and in vivo.

    Science.gov (United States)

    Zhou, Tian; Sui, Baiyan; Mo, Xiumei; Sun, Jiao

    2017-01-01

    The development of skin wound dressings with excellent properties has always been an important challenge in the field of biomedicine. In this study, biomimetic electrospun fish collagen/bioactive glass (Col/BG) nanofibers were prepared. Their structure, tensile strength, antibacterial activity and biological effects on human keratinocytes, human dermal fibroblasts and human vascular endothelial cells were investigated. Furthermore, the Sprague Dawley rat skin defect model was used to validate their effect on wound healing. The results showed that compared with pure fish collagen nanofibers, the tensile strength of the Col/BG nanofibers increased to 21.87±0.21 Mpa, with a certain degree of antibacterial activity against Staphylococcus aureus. It was also found that the Col/BG nanofibers promoted the adhesion, proliferation and migration of human keratinocytes. Col/BG nanofibers induced the secretion of type one collagen and vascular endothelial growth factor by human dermal fibroblasts, which further stimulated the proliferation of human vascular endothelial cells. Animal experimentation indicated that the Col/BG nanofibers could accelerate rat skin wound healing. This study developed a type of multifunctional and biomimetic fish Col/BG nanofibers, which had the ability to induce skin regeneration with adequate tensile strength and antibacterial activity. The Col/BG nanofibers are also easily available and inexpensive, providing the possibility for using as a functional skin wound dressing.

  15. Porous SiO{sub 2} nanofiber grafted novel bioactive glass–ceramic coating: A structural scaffold for uniform apatite precipitation and oriented cell proliferation on inert implant

    Energy Technology Data Exchange (ETDEWEB)

    Das, Indranee [Nano-Structured Materials Division, CSIR-Central Glass and Ceramic Research Institute, Kolkata 700032 (India); De, Goutam, E-mail: gde@cgcri.res.in [Nano-Structured Materials Division, CSIR-Central Glass and Ceramic Research Institute, Kolkata 700032 (India); Hupa, Leena [Johan Gadolin Process Chemistry Centre, Åbo Akademi University, FI-20500 Åbo (Finland); Vallittu, Pekka K. [Turku Clinical Biomaterials Centre—TCBC, University of Turku, FI-20520 Turku (Finland); Institute of Dentistry, University of Turku, Department of Biomaterials Science and City of Turku, Welfare Division, Turku (Finland)

    2016-05-01

    A composite bioactive glass–ceramic coating grafted with porous silica nanofibers was fabricated on inert glass to provide a structural scaffold favoring uniform apatite precipitation and oriented cell proliferation. The coating surfaces were investigated thoroughly before and after immersion in simulated body fluid. In addition, the proliferation behavior of fibroblast cells on the surface was observed for several culture times. The nanofibrous exterior of this composite bioactive coating facilitated homogeneous growth of flake-like carbonated hydroxyapatite layer within a short period of immersion. Moreover, the embedded porous silica nanofibers enhanced hydrophilicity which is required for proper cell adhesion on the surface. The cells proliferated well following a particular orientation on the entire coating by the assistance of nanofibrous scaffold-like structural matrix. This newly engineered composite coating was effective in creating a biological structural matrix favorable for homogeneous precipitation of calcium phosphate, and organized cell growth on the inert glass surface. - Highlights: • Fabricated porous SiO{sub 2} nanofibers grafted composite bioactive glass–ceramic coating on inert glass. • The newly engineered coating facilitates uniformly dense apatite precipitation. • Embedded porous silica nanofibers enhance hydrophilicity of the coated surface. • Cells proliferate well on the entire coating following a particular orientation by the assistance of nanofibers. • The coatings have potential to be used as biological scaffold on the surface of implants.

  16. Preparation and characterization of bioactive composite scaffolds from polycaprolactone nanofibers-chitosan-oxidized starch for bone regeneration.

    Science.gov (United States)

    Nourmohammadi, Jhamak; Ghaee, Azadeh; Liavali, Samira Hosseini

    2016-03-15

    The objective of this study was to fabricate and investigate the characteristics of a suitable scaffold for bone regeneration. Therefore, chitosan was combined with various amounts of oxidized starch through reductive alkylation process. Afterwards, chopped CaP-coated PCL nanofibers were added into the chitosan-starch composite scaffolds in order to obtain bioactivity and mimic bone extracellular matrix structure. Scanning electron microscopy confirmed that all scaffolds had well-interconnected porous structure. The mean pore size, porosity, and water uptake of the composite scaffolds increased by incorporation of higher amounts of starch, while this trend was opposite for compressive modulus and strength. Osteoblast-like cells (MG63) culturing on the scaffolds demonstrated that higher starch content could improve cell viability. Moreover, the cells spread and anchored well on the scaffolds, on which the surface was covered with a monolayer of cells. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Development of Emu oil-loaded PCL/collagen bioactive nanofibers for proliferation and stemness preservation of human adipose-derived stem cells: possible application in regenerative medicine.

    Science.gov (United States)

    Nejati-Koshki, Kazem; Pilehvar-Soltanahmadi, Younes; Alizadeh, Effat; Ebrahimi-Kalan, Abbas; Mortazavi, Yousef; Zarghami, Nosratollah

    2017-08-10

    Adipose tissue-derived stem cells (ASCs) are promising candidate in stem cell therapies, and maintaining their stemness potential is vital to achieve effective treatment. Natural-based scaffolds have been recently attracted increasing attention in nanomedicine and drug delivery. In the present study, a polymeric nanofibrous scaffold was developed based on the polycaprolactone/Collagen (PCL/Coll) containing Emu oil as a bioactive material to induce the proliferation of ASCs, while simultaneously preserving the stemness property of those cells. Fabrication of the electrospun Emu oil-loaded PCL/Coll nanofibers was confirmed by using FE-SEM, FTIR, and tensile test. ASCs were seeded on two types of nanofibers (PCL/Coll and Emu oil-loaded PCL/Coll) and their proliferation, cell cycle progression, and stemness gene expressions were evaluated using MTT, propidium iodide staining, and qPCR during 14 days, respectively. The results indicated that ASCs displayed improved adhesion capacity with the higher rates of bioactivity and proliferation on the Emu oil-loaded nanofibers than the other groups. The proliferation capacity of ASCs on Emu oil-loaded PCL/Coll nanofibers was further confirmed by the cell cycle progression analysis. It was also found that Emu oil-loaded nanofibers significantly up-regulated the expression of stemness markers including sox-2, nanog, oct4, klf4, and c-Myc. The results demonstrated that the nanofibers containing Emu oil can reinforce the cell adhesion and enhance ASCs proliferation while preserving their stemness; therefore, using scaffolds containing natural products may have a great potential to enhance the in vitro expansion capacity of ASCs in the field of stem cell therapy and regenerative medicine.

  18. Preparation, in vitro mineralization and osteoblast cell response of electrospun 13-93 bioactive glass nanofibers.

    Science.gov (United States)

    Deliormanlı, Aylin M

    2015-08-01

    In this study, silicate based 13-93 bioactive glass fibers were prepared through sol-gel processing and electrospinning technique. A precursor solution containing poly (vinyl alcohol) and bioactive glass sol was used to produce fibers. The mixture was electrospun at a voltage of 20 kV by maintaining tip to a collector distance of 10 cm. The amorphous glass fibers with an average diameter of 464±95 nm were successfully obtained after calcination at 625 °C. Hydroxyapatite formation on calcined 13-93 fibers was investigated in simulated body fluid (SBF) using two different fiber concentrations (0.5 and 1 mg/ml) at 37 °C. When immersed in SBF, conversion to a calcium phosphate material showed a strong dependence on the fiber concentration. At 1mg/ml, the surface of the fibers converted to the hydroxyapatite-like material in SBF only after 30 days. At lower solid concentrations (0.5 mg/ml), an amorphous calcium phosphate layer formation was observed followed by the conversion to hydroxyapatite phase after 7 days of immersion. The XTT (2,3-Bis-(2-Methoxy-4-Nitro-5-Sulfophenyl)-2H-Tetrazolium-5-Carboxanilide) assay was conducted to evaluate the osteoblast cell response to the bioactive glass fibers. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Delivery of dexamethasone from bioactive nanofiber matrices stimulates odontogenesis of human dental pulp cells through integrin/BMP/mTOR signaling pathways.

    Science.gov (United States)

    Lim, Hyun-Chang; Nam, Ok Hyung; Kim, Mi-Joo; El-Fiqi, Ahmed; Yun, Hyung-Mun; Lee, Yoo-Mi; Jin, Guang-Zhen; Lee, Hae-Hyoung; Kim, Hae-Won; Kim, Eun-Cheol

    2016-01-01

    Therapeutically relevant design of scaffolds is of special importance in the repair and regeneration of tissues including dentin and pulp. Here we exploit nanofiber matrices that incorporate bioactive glass nanoparticles (BGNs) and deliver the odontogenic drug dexamethasone (DEX) to stimulate the odontogenic differentiation of human dental pulp cells (HDPCs). DEX molecules were first loaded onto the BGN, and then the DEX-BGN complex was incorporated within the biopolymer nanofiber matrix through electrospinning. The release of DEX continued over a month, showing a slow releasing profile. HDPCs cultured on the DEX-releasing BGN matrices were viable, proliferating well up to 14 days. The odontogenic differentiation, as assessed by alkaline phosphatase activity, mRNA expression of genes, and mineralization, was significantly stimulated on the matrices incorporating BGN and further on those releasing DEX. The DEX-releasing BGN matrices highly upregulated the expression of the integrin subsets α1, α5, and β3 as well as integrin downstream signaling molecules, including focal adhesion kinase (FAK), Paxillin, and RhoA, and activated bone morphogenetic protein mRNA and phosphorylation of Smad1/5/8. Furthermore, the DEX-releasing BGN-matrices stimulated Akt and mammalian target of rapamycin (mTOR), which was proven by the inhibition study. Collectively, the designed therapeutic nanofiber matrices that incorporate BGN and deliver DEX were demonstrated to promote odontogenesis of HDPCs, and the integrins, bone morphogenetic protein, and mTOR signaling pathways are proposed to be the possible molecular mechanisms. While further in vivo studies are still needed, the DEX-releasing bioactive scaffolds are considered as a potential therapeutic nanomatrix for regenerative endodontics and tissue engineering.

  20. Delivery of dexamethasone from bioactive nanofiber matrices stimulates odontogenesis of human dental pulp cells through integrin/BMP/mTOR signaling pathways

    Directory of Open Access Journals (Sweden)

    Lim HC

    2016-06-01

    Full Text Available Hyun-Chang Lim,1,* Ok Hyung Nam,2,* Mi-joo Kim,3 Ahmed El-Fiqi,4,5 Hyung-Mun Yun,3 Yoo-Mi Lee,3 Guang-Zhen Jin,4,5 Hae-Hyoung Lee,5,6 Hae-Won Kim,4–6 Eun-Cheol Kim3 1Department of Periodontology, 2Department of Pediatric Dentistry, 3Department of Oral and Maxillofacial Pathology, Research Center for Tooth and Periodontal Regeneration (MRC, School of Dentistry, Kyung Hee University, Seoul, 4Department of Nanobiomedical Science, BK21 PLUS NBM Global Research Center for Regenerative Medicine, 5Institute of Tissue Regeneration Engineering, 6Department of Biomaterials Science, College of Dentistry, Dankook University, Cheonan, Republic of Korea *These authors contributed equally to this work as first authors Abstract: Therapeutically relevant design of scaffolds is of special importance in the repair and regeneration of tissues including dentin and pulp. Here we exploit nanofiber matrices that incorporate bioactive glass nanoparticles (BGNs and deliver the odontogenic drug dexamethasone (DEX to stimulate the odontogenic differentiation of human dental pulp cells (HDPCs. DEX molecules were first loaded onto the BGN, and then the DEX-BGN complex was incorporated within the biopolymer nanofiber matrix through electrospinning. The release of DEX continued over a month, showing a slow releasing profile. HDPCs cultured on the DEX-releasing BGN matrices were viable, proliferating well up to 14 days. The odontogenic differentiation, as assessed by alkaline phosphatase activity, mRNA expression of genes, and mineralization, was significantly stimulated on the matrices incorporating BGN and further on those releasing DEX. The DEX-releasing BGN matrices highly upregulated the expression of the integrin subsets α1, α5, and β3 as well as integrin downstream signaling molecules, including focal adhesion kinase (FAK, Paxillin, and RhoA, and activated bone morphogenetic protein mRNA and phosphorylation of Smad1/5/8. Furthermore, the DEX-releasing BGN

  1. A simple approach for synthesis, characterization and bioactivity of bovine bones to fabricate the polyurethane nanofiber containing hydroxyapatite nanoparticles

    DEFF Research Database (Denmark)

    Sheikh, F. A.; Kanjwal, Muzafar Ahmed; Macossay, J.

    2012-01-01

    In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination...

  2. Bioactive protein-based nanofibers interact with intestinal biological components resulting in transepithelial permeation of a therapeutic protein

    DEFF Research Database (Denmark)

    Boutrup Stephansen, Karen; García-Díaz, María; Jessen, Flemming;

    2015-01-01

    Proteins originating from natural sources may constitute a novel type of material for use in drug delivery. However, thorough understanding of the behavior and effects of such a material when processed into a matrix together with a drug is crucial prior to further development into a drug product...... as a biomaterial facilitated interactions with cells and enzymes found in the gastrointestinal tract and displayed excellent biocompatibility. More specifically, insulin was efficiently encapsulated into FSP fibers maintaining its conformation, and subsequent controlled release was obtained in simulated intestinal...... fluid. The encapsulation of insulin into FSP fibers provided protection against chymotrypsin degradation, and resulted in an increase in insulin transport to around 12% without compromising the cellular viability. This increased transport was driven by interactions upon contact between the nanofibers...

  3. Influence of layer-by-layer assembled electrospun poly (L-lactic acid) nanofiber mats on the bioactivity of endothelial cells

    Science.gov (United States)

    Wu, Keke; Zhang, Xiazhi; Yang, Wufeng; Liu, Xiaoyan; Jiao, Yanpeng; Zhou, Changren

    2016-12-01

    Electrospun poly(L-lactic acid) (PLLA) nanofiber mats were successfully modified by deposition of multilayers with chitosan (CS), heparin (Hep) and graphene oxide (GO) through electrostatic layer-by-layer (LBL) self-assembly method. In this study, the surface properties of PLLA nanofiber mats before and after modification were investigated via scanning electron microscope (SEM), atomic force microscopy (AFM), attenuated total reflectance fourier transformation infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and water contact angle measurement. In addition, the cytocompatibility of the modified PLLA nanofiber mats were investigated by testing endothelial cells compatibility, including cell attachment, cell proliferation and cell cycle. The results revealed that the surfaces of modified PLLA nanofiber mats become much rougher, stifiness and the hydrophilicity of the LBL modified PLLA nanofiber mats were improved compared to original PLLA one. Moreover, the modified PLLA nanofiber mats had promoted the endothelial cells viability attachment significantly. Besides, we studied the PLLA nanofiber mats on the expression of necrosis factor (TNF-α), interleukine-1β (IL-1β), monocyte chemoattractant protein-1 (MCP-1) and vascular cell adhesion molecule-1 (VCAM-1) in endothelial cells. The results showed that modified PLLA nanofiber mats had inhibited the inflammatory response to some extent.

  4. Antibacterial properties of laser spinning glass nanofibers.

    Science.gov (United States)

    Echezarreta-López, M M; De Miguel, T; Quintero, F; Pou, J; Landin, M

    2014-12-30

    A laser-spinning technique has been used to produce amorphous, dense and flexible glass nanofibers of two different compositions with potential utility as reinforcement materials in composites, fillers in bone defects or scaffolds (3D structures) for tissue engineering. Morphological and microstructural analyses have been carried out using SEM-EDX, ATR-FTIR and TEM. Bioactivity studies allow the nanofibers with high proportion in SiO2 (S18/12) to be classified as a bioinert glass and the nanofibers with high proportion of calcium (ICIE16) as a bioactive glass. The cell viability tests (MTT) show high biocompatibility of the laser spinning glass nanofibers. Results from the antibacterial activity study carried out using dynamic conditions revealed that the bioactive glass nanofibers show a dose-dependent bactericidal effect on Sthaphylococcus aureus (S. aureus) while the bioinert glass nanofibers show a bacteriostatic effect also dose-dependent. The antibacterial activity has been related to the release of alkaline ions, the increase of pH of the medium and also the formation of needle-like aggregates of calcium phosphate at the surface of the bioactive glass nanofibers which act as a physical mechanism against bacteria. The antibacterial properties give an additional value to the laser-spinning glass nanofibers for different biomedical applications, such as treating or preventing surgery-associated infections. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Delivery of dexamethasone from bioactive nanofiber matrices stimulates odontogenesis of human dental pulp cells through integrin/BMP/mTOR signaling pathways

    National Research Council Canada - National Science Library

    Lim, Hyun-Chang; Nam, Ok Hyung; Kim, Mi-Joo; El-Fiqi, Ahmed; Yun, Hyung-Mun; Lee, Yoo-Mi; Jin, Guang-Zhen; Lee, Hae-Hyoung; Kim, Hae-Won; Kim, Eun-Cheol

    2016-01-01

    ... (DEX) to stimulate the odontogenic differentiation of human dental pulp cells (HDPCs). DEX molecules were first loaded onto the BGN, and then the DEX-BGN complex was incorporated within the biopolymer nanofiber matrix through electrospinning...

  6. Biologically Active Polycaprolactone/Titanium Hybrid Electrospun Nanofibers for Hard Tissue Engineering

    DEFF Research Database (Denmark)

    Barakat, Nasser A. M.; Sheikh, Faheem A.; Al-Deyab, Salem S.

    2011-01-01

    In this study, a novel strategy to improve the bioactivity of polycaprolactone nanofibers is proposed. Incorporation of pure titanium nanoparticles into polycaprolactone nanofibers strongly enhances the precipitation of bone-like apatite materials when the doped nanofibers are soaked in a simulat...... nanofiber mats and the successful incorporation of the titanium nanoparticles make the prepared polycaprolactone nanofiber mat a proper candidate for the hard-tissue engineering applications....

  7. A hybrid biomimetic scaffold composed of electrospun polycaprolactone nanofibers and self-assembled peptide amphiphile nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Tambralli, Ajay; Blakeney, Bryan; Anderson, Joel; Kushwaha, Meenakshi; Andukuri, Adinarayana; Jun, Ho-Wook [Department of Biomedical Engineering, University of Alabama at Birmingham, 801 Shelby Building, 1825 University Boulevard, Birmingham, AL 35294 (United States); Dean, Derrick [Department of Materials Science and Engineering, University of Alabama at Birmingham, BEC 254, 1150 10th Ave South, Birmingham, AL 35294 (United States)], E-mail: hwjun@uab.edu

    2009-06-01

    Nanofibrous electrospun poly ({epsilon}-caprolactone) (ePCL) scaffolds have inherent structural advantages, but lack of bioactivity has limited their usefulness in biomedical applications. Thus, here we report the development of a hybrid, nanostructured, extracellular matrix (ECM) mimicking scaffold by a combination of ePCL nanofibers and self-assembled peptide amphiphile (PA) nanofibers. The PAs have ECM mimicking characteristics including a cell adhesive ligand (RGDS) and matrix metalloproteinase-2 (MMP-2) mediated degradable sites. Transmission electron microscope imaging verified successful PA self-assembly into nanofibers (diameters of 8-10 nm) using a solvent evaporation method. This evaporation method was then used to successfully coat PAs onto ePCL nanofibers (diameters of 300-400 nm), to develop hybrid, bioactive scaffolds. Scanning electron microscope characterization showed that the PA coatings did not interfere with the porous ePCL nanofiber network. Human mesenchymal stem cells (hMSCs) were seeded onto the hybrid scaffolds to evaluate their bioactivity. Significantly greater attachment and spreading of hMSCs were observed on ePCL nanofibers coated with PA-RGDS as compared to ePCL nanofibers coated with PA-S (no cell adhesive ligand) and uncoated ePCL nanofibers. Overall, this novel strategy presents a new solution to overcome the current bioactivity challenges of electrospun scaffolds and combines the unique characteristics of ePCL nanofibers and self-assembled PA nanofibers to provide an ECM mimicking environment. This has great potential to be applied to many different electrospun scaffolds for various biomedical applications.

  8. Electrospun nanofiber scaffolds: engineering soft tissues

    Energy Technology Data Exchange (ETDEWEB)

    Kumbar, S G; Nukavarapu, S P; Laurencin, C T [Department of Orthopaedic Surgery, University of Virginia, VA 22908 (United States); James, R [Department of Biomedical Engineering, University of Virginia, VA 22908 (United States)], E-mail: laurencin@virginia.edu

    2008-09-01

    Electrospinning has emerged to be a simple, elegant and scalable technique to fabricate polymeric nanofibers. Pure polymers as well as blends and composites of both natural and synthetics have been successfully electrospun into nanofiber matrices. Physiochemical properties of nanofiber matrices can be controlled by manipulating electrospinning parameters to meet the requirements of a specific application. Such efforts include the fabrication of fiber matrices containing nanofibers, microfibers, combination of nano-microfibers and also different fiber orientation/alignments. Polymeric nanofiber matrices have been extensively investigated for diversified uses such as filtration, barrier fabrics, wipes, personal care, biomedical and pharmaceutical applications. Recently electrospun nanofiber matrices have gained a lot of attention, and are being explored as scaffolds in tissue engineering due to their properties that can modulate cellular behavior. Electrospun nanofiber matrices show morphological similarities to the natural extra-cellular matrix (ECM), characterized by ultrafine continuous fibers, high surface-to-volume ratio, high porosity and variable pore-size distribution. Efforts have been made to modify nanofiber surfaces with several bioactive molecules to provide cells with the necessary chemical cues and a more in vivo like environment. The current paper provides an overlook on such efforts in designing nanofiber matrices as scaffolds in the regeneration of various soft tissues including skin, blood vessel, tendon/ligament, cardiac patch, nerve and skeletal muscle.

  9. Electrospun Nanofibers for Neural and Tissue Engineering

    Science.gov (United States)

    Xia, Younan

    2009-03-01

    Electrospinning has been exploited for almost one century to process polymers and other materials into nanofibers with controllable compositions, diameters, porosities, and porous structures for a variety of applications. Owing to its small size, high porosity, and large surface area, a nonwoven mat of electrospun nanofibers can serve as an ideal scaffold to mimic the extra cellular matrix for cell attachment and nutrient transportation. The nanofiber itself can also be functionalized through encapsulation or attachment of bioactive species such as extracellular matrix proteins, enzymes, and growth factors. In addition, the nanofibers can be further assembled into a variety of arrays or architectures by manipulating their alignment, stacking, or folding. All these attributes make electrospinning a powerful tool for generating nanostructured materials for a range of biomedical applications that include controlled release, drug delivery, and tissue engineering. This talk will focus on the use of electrospun nanofibers as scaffolds for neural and bone tissue engineering.

  10. Fabrication of nanocomposite mat through incorporating bioactive glass particles into gelatin/poly(ε-caprolactone) nanofibers by using Box–Behnken design

    Energy Technology Data Exchange (ETDEWEB)

    Gönen, Seza Özge, E-mail: gonens@itu.edu.tr; Erol Taygun, Melek; Aktürk, Ayşen; Küçükbayrak, Sadriye

    2016-10-01

    The current research was conducted to propose a nanocomposite material, which could be suitable to be used as a scaffold for bone tissue engineering applications. For this purpose, nanocomposite fibers of gelatin, poly(ε-caprolactone) (PCL), and bioactive glass were successfully fabricated via electrospinning process. In this context, response surface methodology based on a three-level, four-variable Box-Behnken design was adopted as an optimization tool to choose the most appropriate parameter settings to obtain the desired fiber diameter. The investigation, based on a second order polynomial model, focused on the analysis of the effect of both solution and processing parameters on the fiber diameter and its standard deviation. In optimum conditions (bioactive glass content of 7.5% (w/v), applied voltage of 25 kV, tip-to-collector distance of 12.5 cm, and flow rate of 1 mL/h), the fiber diameter was found to be 584 ± 337 nm which was in good agreement with the predicted value by the developed models (523 ± 290 nm). Analytical tools such as scanning electron microscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy, and differential thermal analyzer were used for further evaluation of the optimized nanocomposite mat. The overall results showed that nanocomposite scaffolds could be promising candidates for tissue engineering applications. - Highlights: • Nanocomposite fibers of gelatin, PCL, and bioactive glass were successfully fabricated. • Three-level, four-variable Box-Behnken design was adopted as an optimization tool. • The individual and interactive effects of the electrospinning parameters were determined. • Quadratic models were used to adjust the fiber diameter and its standard deviation.

  11. Surface-functionalized electrospun nanofibers for tissue engineering and drug delivery.

    Science.gov (United States)

    Yoo, Hyuk Sang; Kim, Taek Gyoung; Park, Tae Gwan

    2009-10-05

    Electrospun nanofibers with a high surface area to volume ratio have received much attention because of their potential applications for biomedical devices, tissue engineering scaffolds, and drug delivery carriers. In order to develop electrospun nanofibers as useful nanobiomaterials, surfaces of electrospun nanofibers have been chemically functionalized for achieving sustained delivery through physical adsorption of diverse bioactive molecules. Surface modification of nanofibers includes plasma treatment, wet chemical method, surface graft polymerization, and co-electrospinning of surface active agents and polymers. A variety of bioactive molecules including anti-cancer drugs, enzymes, cytokines, and polysaccharides were entrapped within the interior or physically immobilized on the surface for controlled drug delivery. Surfaces of electrospun nanofibers were also chemically modified with immobilizing cell specific bioactive ligands to enhance cell adhesion, proliferation, and differentiation by mimicking morphology and biological functions of extracellular matrix. This review summarizes surface modification strategies of electrospun polymeric nanofibers for controlled drug delivery and tissue engineering.

  12. The Use of Nanoscaled Fibers or Tubes to Improve Biocompatibility and Bioactivity of Biomedical Materials

    Directory of Open Access Journals (Sweden)

    Xiaoming Li

    2013-01-01

    Full Text Available Nanofibers and nanotubes have recently gained substantial interest for potential applications in tissue engineering due to their large ratio of surface area to volume and unique microstructure. It has been well proved that the mechanical property of matrix could be largely enhanced by the addition of nanoscaled fibers or tubes. At present, more and more researches have shown that the biocompatibility and bioactivity of biomedical materials could be improved by the addition of nanofibers or nanotubes. In this review, the efforts using nanofibers and nanotubes to improve biocompatibility and bioactivity of biomedical materials, including polymeric nanofibers/nanotubes, metallic nanofibers/nanotubes, and inorganic nanofibers/nanotubes, as well as their researches related, are demonstrated in sequence. Furthermore, the possible mechanism of improving biocompatibility and bioactivity of biomedical materials by nanofibers or nanotubes has been speculated to be that the specific protein absorption on the nanoscaled fibers or tubes plays important roles.

  13. Functionalized Nanofiber Meshes Enhance Immunosorbent Assays.

    Science.gov (United States)

    Hersey, Joseph S; Meller, Amit; Grinstaff, Mark W

    2015-12-01

    Three-dimensional substrates with high surface-to-volume ratios and subsequently large protein binding capacities are of interest for advanced immunosorbent assays utilizing integrated microfluidics and nanosensing elements. A library of bioactive and antifouling electrospun nanofiber substrates, which are composed of high-molecular-weight poly(oxanorbornene) derivatives, is described. Specifically, a set of copolymers are synthesized from three 7-oxanorbornene monomers to create a set of water insoluble copolymers with both biotin (bioactive) and triethylene glycol (TEG) (antifouling) functionality. Porous three-dimensional nanofiber meshes are electrospun from these copolymers with the ability to specifically bind streptavidin while minimizing the nonspecific binding of other proteins. Fluorescently labeled streptavidin is used to quantify the streptavidin binding capacity of each mesh type through confocal microscopy. A simplified enzyme-linked immunosorbent assay (ELISA) is presented to assess the protein binding capabilities and detection limits of these nanofiber meshes under both static conditions (26 h) and flow conditions (1 h) for a model target protein (i.e., mouse IgG) using a horseradish peroxidase (HRP) colorimetric assay. Bioactive and antifouling nanofiber meshes outperform traditional streptavidin-coated polystyrene plates under flow, validating their use in future advanced immunosorbent assays and their compatibility with microfluidic-based biosensors.

  14. Nanobiotechnology approach to fabricate polycaprolactone nanofibers containing solid titanium nanoparticles as future implant materials

    DEFF Research Database (Denmark)

    Sheikh, Faheem A.; Kanjwal, Muzafar Ahmed; Cha, Jaegwan

    2011-01-01

    are exploited to form nanofibers by the simple electrospinning process. The prepared colloidal solutions were characterized using dynamic light scattering and electrophoratic light scattering which indicated unimodal size distribution and negative zeta potential. To investigate the bioactivity of the resultant...

  15. Multifunctional Electrospun Nanofibers Incorporated with an Anti-infection Drug and Immobilized with Proteins

    Science.gov (United States)

    Zhou, Shufei

    Electrospinning has been used to fabricate ultrafine fibers with sizes ranging from nano to micrometers. Nanofibers electrospun from biocompatible and biodegradable polymers have been extensively investigated for their potential applications in wound healing and tissue regeneration. These nanofiber materials can be modified to incorporate bioactive molecules, such as antibacterial agents that provide infection control, or functional proteins which promote cell proliferation and tissue reconstruction. Despite the numerous studies on the development and design of nanofibers for biomedical applications, there has been little research on multifunctional nanofibers that are incorporated with both antibacterial drug(s) and bioactive proteins. The objective of the current study is, therefore, to develop nanofibers that are functionalized by several bioactive molecules. In this study, electrospinning was utilized to fabricate nanofibers from biodegradable polymers PLLA (Poly-L-lactide) and the copolymer PLLA-PEG (Polyethylene glycol)-NH2.A water soluble antibiotic drug, Tetracycline Hydrochloride (TCH), was incorporated into the electrospun nanofibers via emulsion electrospinning. The TCH-loaded nanofibers were surface modified to produce functional groups that can be further conjugated with a model protein, Bovine Serum Albumin (BSA).Drug releasing profiles of the medicated nanofibers were monitored and their antimicrobial properties were evaluated. Proteins (BSAs) immobilized on the fiber surface were verified by ATR-FTIR. The number of immobilized BSAs was determined using a UV-Vis spectrophotometer. The results of the study suggested that this multifunctional nanofibrous material could be a promising material for wound dressing or scaffolds for tissue engineering.

  16. Controlled Angiogenesis in Peptide Nanofiber Composite Hydrogels

    OpenAIRE

    Wickremasinghe, Navindee C.; Kumar, Vivek A.; Shi, Siyu; Hartgerink, Jeffrey D.

    2015-01-01

    Multidomain peptide (MDP) nanofibers create scaffolds that can present bioactive cues to promote biological responses. Orthogonal self-assembly of MDPs and growth-factor-loaded liposomes generate supramolecular composite hydrogels. These composites can act as delivery vehicles with time-controlled release. Here we examine the controlled release of placental growth factor-1 (PlGF-1) for its ability to induce angiogenic responses. PlGF-1 was loaded either in MDP matrices or within liposomes bou...

  17. Bioactive substances

    Digital Repository Service at National Institute of Oceanography (India)

    Wahidullah, S.

    Chemistry related to certain bioactive molecules, from Indian Ocean Region, developed into drugs or which served as models for the synthesis of more effective bioactive substances or in use in fundamental studies of physiological and biochemical...

  18. Patterned electrospun nanofiber matrices via localized dissolution: potential for guided tissue formation.

    Science.gov (United States)

    Jia, Chao; Yu, Dou; Lamarre, Marven; Leopold, Philip L; Teng, Yang D; Wang, Hongjun

    2014-12-23

    With the assistance of an ink-jet printer, solvent (the "ink") can be controllably and reproducibly printed onto electrospun nanofiber meshes (the "paper") to generate various micropatterns and subsequently guide distinct cellular organization and phenotype expression. In combination with the nanofiber-assisted layer-by-layer cell assembly, the patterned electrospun meshes will define an instructive microenvironment for guided tissue formation.

  19. Electrospun Perovskite Nanofibers

    Science.gov (United States)

    Chen, Dongsheng; Zhu, Yanyan

    2017-02-01

    CH3NH3PbI3 perovskite nanofibers were synthesized by versatile electrospinning techniques. The synthetic CH3NH3PbI3 nanofibers were characterized by X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and photoluminescence. As counter electrodes, the synthesized nanofibers increased the performance of the dye-sensitized solar cells from 1.58 to 2.09%. This improvement was attributed to the enhanced smoothness and efficiency of the electron transport path. Thus, CH3NH3PbI3 perovskites nanofibers are potential alternative to platinum counter electrodes in dye-sensitized solar cells.

  20. NANOFIBER PRODUCTION [REVIEW

    Directory of Open Access Journals (Sweden)

    KESKIN Reyhan

    2016-05-01

    Full Text Available Nanofibers are very thin fibers having diameters lower than 100 nm and their lengths might be as long as possible within production limits. The large surface area of nanofibers gives opportunity to functionalize them. Nanofibers have several applications including both applications for industrial production in many sectors and for research studies. Nanofibers find applications in energy devices such as solar cells, fuel cells and nanogenarators; in filtration applications (such as water/oil filtration, fine particle filtration, aerosol filtration, air filtration, nanoparticle filtration and in several medical applications including antibacterial efficacy, wound healing, drug delivery and scaffolds for tissue engineering. There are several methods to produce nanofibers: Electrospinning, self assembly, phase separation, bacterial cellulose, templating, drawing, extraction, vapor-phase polymerization, kinetically controlled solution synthesis, conventional chemical polymerization for anyline. Electrospinning is the most widely used method to produce nanofibers.In electrospinning, a high electric field, which is in kilovolts, is applied to a polymer solution. The polymer solution is drawn from a syringe to a collector surface.Electrospinning requires usage of appropriate solvent, removal of evaporating solvent, an adequate power supply to overcome the viscosity and surface tension of the polymer solution; while, jet instability and jet control remain as challenges in electrospinning. Nanofiber production methods possess some disadvantages as: higher cost compared to conventional fiber production methods, health hazards such as inhale risk of nanofibers during production and keeping the environment safe from evaporating solvents used during nanofiber production. Up to date, many researches have been conducted on nanofibers and electrospinning; still, more controllable, more cost effective, more environmentally friendly and safer methods are of

  1. Antioxidant activity of polyaniline nanofibers

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Well-confined uniform polyaniline (PANT) nanofibers were synthesized by using photo-assisted chemical oxidative polymerization of aniline in the presence of different dopant acids, and the radical scavenging ability of the produced PANI nanofibers was determined by the DPPH assay. It was found that the antioxidant activity of PANI nanofibers was higher than conventional PANI,and increased with decreasing of averaged diameter of the nanofibers. The enhanced antioxidant activity was concerned with increased surface area of PANI nanofibers.

  2. Hydroxyapatite Mineralization on the Calcium Chloride Blended Polyurethane Nanofiber via Biomimetic Method

    Science.gov (United States)

    Nirmala, R.; Nam, Ki Taek; Navamathavan, R.; Park, Soo-Jin; Kim, Hak Yong

    2011-12-01

    Polyurethane nanofibers containing calcium chloride (CaCl2) were prepared via an electrospinning technique for the biomedical applications. Polyurethane nanofibers with different concentration of CaCl2 were electrospun, and their bioactivity evaluation was conducted by incubating in biomimetic simulated body fluid (SBF) solution. The morphology, structure and thermal properties of the polyurethane/CaCl2 composite nanofibers were characterized by means of scanning electron microscopy (SEM), field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetry. SEM images revealed that the CaCl2 salt incorporated homogeneously to form well-oriented nanofibers with smooth surface and uniform diameters along their lengths. The SBF incubation test confirmed the formation of apatite-like materials, exhibiting enhanced bioactive behavior of the polyurethane/CaCl2 composite nanofibers. This study demonstrated that the electrospun polyurethane containing CaCl2 composite nanofibers enhanced the in vitro bioactivity and supports the growth of apatite-like materials.

  3. Gelatin Nanofiber Matrices Derived from Schiff Base Derivative for Tissue Engineering Applications.

    Science.gov (United States)

    Jaiswal, Devina; James, Roshan; Shelke, Namdev B; Harmon, Matthew D; Brown, Justin L; Hussain, Fazle; Kumbar, Sangamesh G

    2015-11-01

    Electrospinning of water-soluble polymers and retaining their mechanical strength and bioactivity remain challenging. Volatile organic solvent soluble polymers and their derivatives are preferred for fabricating electrospun nanofibers. We report the synthesis and characterization of 2-nitrobenzyl-gelatin (N-Gelatin)--a novel gelatin Schiff base derivative--and the resulting electrospun nanofiber matrices. The 2-nitrobenzyl group is a photoactivatable-caged compound and can be cleaved from the gelatin nanofiber matrices following UV exposure. Such hydrophobic modification allowed the fabrication of gelatin and blend nanofibers with poly(caprolactone) (PCL) having significantly improved tensile properties. Neat gelatin and their PCL blend nanofiber matrices showed a modulus of 9.08 ± 1.5 MPa and 27.61 ± 4.3 MPa, respectively while the modified gelatin and their blends showed 15.63 ± 2.8 MPa and 24.47 ± 8.7 MPa, respectively. The characteristic infrared spectroscopy band for gelatin Schiff base derivative at 1560 cm(-1) disappeared following exposure to UV light indicating the regeneration of free NH2 group and gelatin. These nanofiber matrices supported cell attachment and proliferation with a well spread morphology as evidenced through cell proliferation assay and microscopic techniques. Modified gelatin fiber matrices showed a 73% enhanced cell attachment and proliferation rate compared to pure gelatin. This polymer modification methodology may offer a promising way to fabricate electrospun nanofiber matrices using a variety of proteins and peptides without loss of bioactivity and mechanical strength.

  4. Collection of Electrospun Polymer Nanofibers

    Science.gov (United States)

    Kataphinan, Woraphon; Reneker, Darrell H.

    2000-03-01

    The dry nanofibers produced in a typical electrospinning process are electrically charged. The nanofibers were directed by an electrical field, a tensile force along the axis of the fiber, and by the viscous drag force of moving air. The looping and spiraling path of the nanofibers, which resulted from bending and other kinds of instabilities that occurred as the fiber was formed, also complicated the collection process. Non-woven sheets of nanofibers were made by attracting the nanofibers to a conducting sheet or screen. The sheet or screen was flat and stationary, or wrapped around a rotating drum. Nanofibers were also collected in a liquid. The liquid removed charge or solvent. Nanofibers were collected on the surface of a non-wetting liquid, so that the patterns formed by the arriving nanofibers were observed directly. Streams of air, and air vortices were also used. These methods are being combined with robotic manipulators to collect nanofibers in many useful forms.

  5. Bioactive Peptides

    Directory of Open Access Journals (Sweden)

    Eric Banan-Mwine Daliri

    2017-04-01

    Full Text Available The increased consumer awareness of the health promoting effects of functional foods and nutraceuticals is the driving force of the functional food and nutraceutical market. Bioactive peptides are known for their high tissue affinity, specificity and efficiency in promoting health. For this reason, the search for food-derived bioactive peptides has increased exponentially. Over the years, many potential bioactive peptides from food have been documented; yet, obstacles such as the need to establish optimal conditions for industrial scale production and the absence of well-designed clinical trials to provide robust evidence for proving health claims continue to exist. Other important factors such as the possibility of allergenicity, cytotoxicity and the stability of the peptides during gastrointestinal digestion would need to be addressed. This review discusses our current knowledge on the health effects of food-derived bioactive peptides, their processing methods and challenges in their development.

  6. Bioactive Peptides.

    Science.gov (United States)

    Daliri, Eric Banan-Mwine; Oh, Deog H; Lee, Byong H

    2017-04-26

    The increased consumer awareness of the health promoting effects of functional foods and nutraceuticals is the driving force of the functional food and nutraceutical market. Bioactive peptides are known for their high tissue affinity, specificity and efficiency in promoting health. For this reason, the search for food-derived bioactive peptides has increased exponentially. Over the years, many potential bioactive peptides from food have been documented; yet, obstacles such as the need to establish optimal conditions for industrial scale production and the absence of well-designed clinical trials to provide robust evidence for proving health claims continue to exist. Other important factors such as the possibility of allergenicity, cytotoxicity and the stability of the peptides during gastrointestinal digestion would need to be addressed. This review discusses our current knowledge on the health effects of food-derived bioactive peptides, their processing methods and challenges in their development.

  7. Fabrication of electrospun nanofibers bundles

    Science.gov (United States)

    Ye, Junjun; Sun, Daoheng

    2007-12-01

    Aligned nanofibers, filament bundle composed of large number of nanofibers have potential applications such as bio-material, composite material etc. A series of electrospinning experiments have been conducted to investigate the electrospinning process,in which some parameters such as polymer solution concentration, bias voltage, distance between spinneret and collector, solution flow rate etc have been setup to do the experiment of nanofibers bundles construction. This work firstly reports electrospun nanofiber bundle through non-uniform electrical field, and nanofibers distributed in different density on electrodes from that between them. Thinner nanofibers bundle with a few numbers of nanofiber is collected for 3 seconds; therefore it's also possible that the addressable single nanofiber could be collected to bridge two electrodes.

  8. Porous block nanofiber composite filters

    Energy Technology Data Exchange (ETDEWEB)

    Ginley, David S.; Curtis, Calvin J.; Miedaner, Alexander; Weiss, Alan J.; Paddock, Arnold

    2016-08-09

    Porous block nano-fiber composite (110), a filtration system (10) and methods of using the same are disclosed. An exemplary porous block nano-fiber composite (110) includes a porous block (100) having one or more pores (200). The porous block nano-fiber composite (110) also includes a plurality of inorganic nano-fibers (211) formed within at least one of the pores (200).

  9. Nanofibers as carrier systems for antimicrobial microemulsions. Part I: fabrication and characterization.

    Science.gov (United States)

    Kriegel, C; Kit, K M; McClements, D J; Weiss, J

    2009-01-20

    Antimicrobial nanofibers were prepared by solubilizing an antimicrobial essential oil (eugenol; 0.75-1.5 wt %) in surfactant micelles (Surfynol 465; 5-10 wt %) to form eugenol-containing microemulsions. Microemulsions were mixed with a nonionic synthetic polymer (poly(vinyl alcohol), PVA; M(w) = 130 kDa, degree of hydrolysis approximately 87%) and solutions subjected to electrospinning to induce nanofiber formation. Solution properties, fiber morphology, and composition of nanofibers were determined. The surface conductivity and viscosity of the polymer solutions increased, while surface tension decreased as both surfactant and eugenol concentration increased. Material deposited on the collector plate consisted primarily of nanofibers with a circular cross section with some surface roughness, although some bead defects were observed. The mean fiber diameters ranged from 57 to 126 nm with fibers having a broad diameter distribution (10-280 nm). The mean diameter of the nanofibers decreased with increasing surfactant concentration and decreasing eugenol concentration. Transmission electron microscopy indicated that microemulsion droplets were homogenously dispersed throughout the nanofibers. Results suggest that electrospun nanofibers may serve as carrier vehicles for microemulsions containing solubilized lipophilic functional compounds such as bioactives, antimicrobials, antioxidants, flavors, and pharmaceuticals.

  10. Electrospun tilapia collagen nanofibers accelerating wound healing via inducing keratinocytes proliferation and differentiation.

    Science.gov (United States)

    Zhou, Tian; Wang, Nanping; Xue, Yang; Ding, Tingting; Liu, Xin; Mo, Xiumei; Sun, Jiao

    2016-07-01

    The development of biomaterials with the ability to induce skin wound healing is a great challenge in biomedicine. In this study, tilapia skin collagen sponge and electrospun nanofibers were developed for wound dressing. The collagen sponge was composed of at least two α-peptides. It did not change the number of spleen-derived lymphocytes in BALB/c mice, the ratio of CD4(+)/CD8(+) lymphocytes, and the level of IgG or IgM in Sprague-Dawley rats. The tensile strength and contact angle of collagen nanofibers were 6.72±0.44MPa and 26.71±4.88°, respectively. They also had good thermal stability and swelling property. Furthermore, the nanofibers could significantly promote the proliferation of human keratinocytes (HaCaTs) and stimulate epidermal differentiation through the up-regulated gene expression of involucrin, filaggrin, and type I transglutaminase in HaCaTs. The collagen nanofibers could also facilitate rat skin regeneration. In the present study, electrospun biomimetic tilapia skin collagen nanofibers were succesfully prepared, were proved to have good bioactivity and could accelerate rat wound healing rapidly and effectively. These biological effects might be attributed to the biomimic extracellular matrix structure and the multiple amino acids of the collagen nanofibers. Therefore, the cost-efficient tilapia collagen nanofibers could be used as novel wound dressing, meanwhile effectively avoiding the risk of transmitting animal disease in the future clinical apllication.

  11. Controlled release of retinyl acetate from β-cyclodextrin functionalized poly(vinyl alcohol) electrospun nanofibers.

    Science.gov (United States)

    Lemma, Solomon M; Scampicchio, Matteo; Mahon, Peter J; Sbarski, Igor; Wang, James; Kingshott, Peter

    2015-04-08

    Retinyl acetate (RA) was effectively incorporated into electrospun nanofibers of poly(vinyl alcohol) (PVA) containing β-cyclodextrin (β-CD) in order to form inclusion complexes for encapsulation to prolong shelf life and thermal stability. The physical and thermal properties of encapsulated RA were determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The nanofibers of PVA/RA and PVA/RA/β-CD exhibited bead free average fiber diameters of 264 ± 61 and 223 ± 49 nm, respectively. The surface chemistry of the functional nanofibers was investigated by X-ray photoelectron spectroscopy (XPS). Thermogravimetric analysis (TGA) demonstrated different thermal stabilities between the bioactive and the polymer, with and without β-CD. Square-wave voltammogram peak current changes were used to follow the release kinetics of RA from the nanofibers. Results indicate that RA coated inside PVA/β-CD nanofibers was protected against oxidation much better than RA in PVA nanofibers and should extend the shelf life. In addition, RA encapsulated in the PVA/β-CD had better thermal stability than PVA nanofibers.

  12. Morphological Effects of HA on the Cell Compatibility of Electrospun HA/PLGA Composite Nanofiber Scaffolds

    Directory of Open Access Journals (Sweden)

    Adnan Haider

    2014-01-01

    Full Text Available Tissue engineering is faced with an uphill challenge to design a platform with appropriate topography and suitable surface chemistry, which could encourage desired cellular activities and guide bone tissue regeneration. To develop such scaffolds, composite nanofiber scaffolds of nHA and sHA with PLGA were fabricated using electrospinning technique. nHA was synthesized using precipitation method, whereas sHA was purchased. The nHA and sHA were suspended in PLGA solution separately and electrospun at optimized electrospinning parameters. The composite nanofiber scaffolds were characterized by FE-SEM, EDX analysis, TEM, XRD analysis, FTIR, and X-ray photoelectron. The potential of the HA/PLGA composite nanofiber as bone scaffolds in terms of their bioactivity and biocompatibility was assessed by culturing the osteoblastic cells onto the composite nanofiber scaffolds. The results from in vitro studies revealed that the nHA/PLGA composite nanofiber scaffolds showed higher cellular adhesion, proliferation, and enhanced osteogenesis performance, along with increased Ca+2 ions release compared to the sHA/PLGA composite nanofiber scaffolds and pristine PLGA nanofiber scaffold. The results show that the structural dependent property of HA might affect its potential as bone scaffold and implantable materials in regenerative medicine and clinical tissue engineering.

  13. Reducing the content of carrier polymer in pectin nanofibers by electrospinning at low loading followed with selective washing.

    Science.gov (United States)

    Cui, Sisi; Yao, Bing; Sun, Xue; Hu, Junli; Zhou, Yifa; Liu, Yichun

    2016-02-01

    Nanofibers of natural polymers represent an essential class of materials in biomedicine. Pectin is a plant-sourced anionic polysaccharide widely used in food products and biomedicine owning to its abundance, biocompatibility and inherent bioactivity. However, current electrospun pectin nanofibers are suffered from high content of carrier polymer, which may lead to low integrity and mechanical strength as well as in vivo toxicity. We report here a strategy to reduce the content of carrier polymer, polyethylene oxide (PEO) in our study, in pectin nanofibers, via electrospinning at low loading followed with selective washing. With improved electrospinning condition, we first enabled electrospinning of pectin nanofibers at low PEO loading. Then the PEO was removed by washing with a selective solvent to give pectin nanofibers containing only 1.5% PEO. The strategy was versatile to pectins from various sources and of various degree of esterification. The pectin nanofibers exhibited Young's modulus as high as 358.5MPa. In view of their rich bioactivity, the pectin nanofibers of low content of carrier polymer are promising materials for a wide range of biomedical applications.

  14. Poly(hydroxybutyrate)/cellulose acetate blend nanofiber scaffolds: Preparation, characterization and cytocompatibility

    Energy Technology Data Exchange (ETDEWEB)

    Zhijiang, Cai, E-mail: caizhijiang@hotmail.com [School of Textiles, Tianjin Polytechnic University, Tianjin 300387 (China); State Key Laboratory of Hollow Fiber Membrane Material and Processes, No 399 BingShuiXi Street, XiQing District, Tianjin, China, 300387 (China); Yi, Xu; Haizheng, Yang; Jia, Jianru; Liu, Yuanpei [School of Textiles, Tianjin Polytechnic University, Tianjin 300387 (China)

    2016-01-01

    Poly(hydroxybutyrate) (PHB)/cellulose acetate (CA) blend nanofiber scaffolds were fabricated by electrospinning using the blends of chloroform and DMF as solvent. The blend nanofiber scaffolds were characterized by SEM, FTIR, XRD, DSC, contact angle and tensile test. The blend nanofibers exhibited cylindrical, uniform, bead-free and random orientation with the diameter ranged from 80–680 nm. The scaffolds had very well interconnected porous fibrous network structure and large aspect surface areas. It was found that the presence of CA affected the crystallization of PHB due to formation of intermolecular hydrogen bonds, which restricted the preferential orientation of PHB molecules. The DSC result showed that the PHB and CA were miscible in the blend nanofiber. An increase in the glass transition temperature was observed with increasing CA content. Additionally, the mechanical properties of blend nanofiber scaffolds were largely influenced by the weight ratio of PHB/CA. The tensile strength, yield strength and elongation at break of the blend nanofiber scaffolds increased from 3.3 ± 0.35 MPa, 2.8 ± 0.26 MPa, and 8 ± 0.77% to 5.05 ± 0.52 MPa, 4.6 ± 0.82 MPa, and 17.6 ± 1.24% by increasing PHB content from 60% to 90%, respectively. The water contact angle of blend nanofiber scaffolds decreased about 50% from 112 ± 2.1° to 60 ± 0.75°. The biodegradability was evaluated by in vitro degradation test and the results revealed that the blend nanofiber scaffolds showed much higher degradation rates than the neat PHB. The cytocompatibility of the blend nanofiber scaffolds was preliminarily evaluated by cell adhesion studies. The cells incubated with PHB/CA blend nanofiber scaffold for 48 h were capable of forming cell adhesion and proliferation. It showed much better biocompatibility than pure PHB film. Thus, the prepared PHB/CA blend nanofiber scaffolds are bioactive and may be more suitable for cell proliferation suggesting that these scaffolds can be used for

  15. Optics of Nanofibers

    DEFF Research Database (Denmark)

    Bordo, Vladimir

    During the last decade, fabrication and investigation of submicron-sized optical fibers have been received growing attention. Such nanofibers or nanowires can be grown from both inorganic and organic semiconductor materials being arranged in mutually parallel nanoaggregates. Also, selected...... nanofibers can be placed on a substrate or immersed in a liquid that allows one to study them individually. It has been demonstated that such structures possess promising waveguiding and photoluminescence properties. Under pumping conditions, they operate as a nanolaser. This remarkable progress dictates...

  16. Silver nanoparticle/chitosan oligosaccharide/poly(vinyl alcohol nanofibers as wound dressings: a preclinical study

    Directory of Open Access Journals (Sweden)

    Li CW

    2013-11-01

    Full Text Available Chenwen Li,1,* Ruoqiu Fu,1,* Caiping Yu,1 Zhuoheng Li,1 Haiyan Guan,1 Daqiang Hu,1 Dehua Zhao,2 Laichun Lu1 1Department of Pharmacy, Institute of Surgery Research, Daping Hospital, Third Military Medical University, 2College of Pharmacy, Chongqing Medical University, Chongqing, People's Republic of China *These authors contributed equally to this work Abstract: In this study, a mixture of poly(vinyl alcohol (PVA and chitosan oligosaccharides (COS was electrospun with silver nanoparticles (AgNPs to produce fibrous mats for use in wound healing. The AgNPs were reduced by COS prior to electrospinning or Ag+ was reduced via ultraviolet irradiation in nanofibers. The morphologies of the PVA/COS/AgNO3 and PVA/COS-AgNP nanofibers were analyzed by scanning electron microscopy. Formation of the AgNPs was investigated by field emission transmission electron microscopy, ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. We also evaluated the biocompatibility of the nanofibers, particularly their cytotoxicity to human skin fibroblasts and potential to cause primary skin irritation. The in vitro antibacterial activity and in vivo wound healing capacity of the nanofibers were also investigated. The nanofibers had a smooth surface with an average diameter of 130–192 nm. The diameters of the AgNPs were in the range of 15–22 nm. The nanofibers significantly inhibited growth of Escherichia coli and Staphylococcus aureus bacteria. PVA/COS-AgNP nanofibers accelerated the rate of wound healing over that of the control (gauze. The results of our in vitro and in vivo animal experiments suggest that PVA/COS-AgNP nanofibers should be of greater interest than PVA/COS/AgNO3 nanofibers for clinical use as a bioactive wound dressing. Keywords: preclinical study, wound dressing, electrospinning, silver nanoparticles, poly(vinyl alcohol, chitosan oligosaccharides

  17. Templates for integrated nanofiber growth

    DEFF Research Database (Denmark)

    Oliveira Hansen, Roana Melina de

    Para-hexaphenylene (p6P) molecules have the ability to self-assemble into organic nanofibers. These nanofibers hold unique optoelectronic properties, which make them interesting candidates as elements in electronic and optoelectronic devices. Typically these nanofibers are grown on specific single......, high-volume integration. Besides such single-crystalline templates, the nanofibers can also be grown on non-crystalline gold surfaces, on which the orientation of the nanofibers can be manipulated by structuring the gold surface prior to p6P deposition. In this work, a novel method for in-situ growth...... of p6P nanofibers on nano-structured gold surfaces is presented. The substrates are prepared by conventional nanofabrication techniques such as e-beam lithography and metal deposition, which increase their potential as device platforms. Some of the results presented here demonstrate, that both...

  18. Ultrasonic dyeing of cellulose nanofibers.

    Science.gov (United States)

    Khatri, Muzamil; Ahmed, Farooq; Jatoi, Abdul Wahab; Mahar, Rasool Bux; Khatri, Zeeshan; Kim, Ick Soo

    2016-07-01

    Textile dyeing assisted by ultrasonic energy has attained a greater interest in recent years. We report ultrasonic dyeing of nanofibers for the very first time. We chose cellulose nanofibers and dyed with two reactive dyes, CI reactive black 5 and CI reactive red 195. The cellulose nanofibers were prepared by electrospinning of cellulose acetate (CA) followed by deacetylation. The FTIR results confirmed complete conversion of CA into cellulose nanofibers. Dyeing parameters optimized were dyeing temperature, dyeing time and dye concentrations for each class of the dye used. Results revealed that the ultrasonic dyeing produced higher color yield (K/S values) than the conventional dyeing. The color fastness test results depicted good dye fixation. SEM analysis evidenced that ultrasonic energy during dyeing do not affect surface morphology of nanofibers. The results conclude successful dyeing of cellulose nanofibers using ultrasonic energy with better color yield and color fastness results than conventional dyeing.

  19. Controlled Angiogenesis in Peptide Nanofiber Composite Hydrogels.

    Science.gov (United States)

    Wickremasinghe, Navindee C; Kumar, Vivek A; Shi, Siyu; Hartgerink, Jeffrey D

    2015-09-14

    Multidomain peptide (MDP) nanofibers create scaffolds that can present bioactive cues to promote biological responses. Orthogonal self-assembly of MDPs and growth-factor-loaded liposomes generate supramolecular composite hydrogels. These composites can act as delivery vehicles with time-controlled release. Here we examine the controlled release of placental growth factor-1 (PlGF-1) for its ability to induce angiogenic responses. PlGF-1 was loaded either in MDP matrices or within liposomes bound inside MDP matrices. Scaffolds showed expected rapid infiltration of macrophages. When released through liposomes incorporated in MDP gels (MDP(Lipo)), PlGF-1 modulates HUVEC VEGF receptor activation in vitro and robust vessel formation in vivo. These loaded MDP(Lipo) hydrogels induce a high level of growth-factor-mediated neovascular maturity. MDP(Lipo) hydrogels offer a biocompatible and injectable platform to tailor drug delivery and treat ischemic tissue diseases.

  20. Cell Attachment and Viability Study of PCL Nano-fiber Modified by Cold Atmospheric Plasma.

    Science.gov (United States)

    Atyabi, Seyed Mohammad; Sharifi, Fereshteh; Irani, Shiva; Zandi, Mojgan; Mivehchi, Houri; Nagheh, Zahra

    2016-06-01

    The field of tissue engineering is an emerging discipline which applies the basic principles of life sciences and engineering to repair and restore living tissues and organs. The purpose of this study was to investigate the effect of cold and non-thermal plasma surface modification of poly (ϵ-caprolactone) (PCL) scaffolds on fibroblast cell behavior. Nano-fiber PCL was fabricated through electrospinning technique, and some fibers were then treated by cold and non-thermal plasma. The cell-biomaterial interactions were studied by culturing the fibroblast cells on nano-fiber PCL. Scaffold biocompatibility test was assessed using an inverted microscope. The growth and proliferation of fibroblast cells on nano-fiber PCL were analyzed by MTT viability assay. Cellular attachment on the nano-fiber and their morphology were evaluated using scanning electron microscope. The result of cell culture showed that nano-fiber could support the cellular growth and proliferation by developing three-dimensional topography. The present study demonstrated that the nano-fiber surface modification with cold plasma sharply enhanced the fibroblast cell attachment. Thus, cold plasma surface modification greatly raised the bioactivity of scaffolds.

  1. Processing and Structure of Carbon Nanofiber Paper

    Directory of Open Access Journals (Sweden)

    Zhongfu Zhao

    2009-01-01

    Full Text Available A unique concept of making nanocomposites from carbon nanofiber paper was explored in this study. The essential element of this method was to design and manufacture carbon nanofiber paper with well-controlled and optimized network structure of carbon nanofibers. In this study, carbon nanofiber paper was prepared under various processing conditions, including different types of carbon nanofibers, solvents, dispersants, and acid treatment. The morphologies of carbon nanofibers within the nanofiber paper were characterized with scanning electron microscopy (SEM. In addition, the bulk densities of carbon nanofiber papers were measured. It was found that the densities and network structures of carbon nanofiber paper correlated to the dispersion quality of carbon nanofibers within the paper, which was significantly affected by papermaking process conditions.

  2. Nanofiber composites containing N-heterocyclic carbene complexes with antimicrobial activity

    Directory of Open Access Journals (Sweden)

    Elzatahry AA

    2012-06-01

    Full Text Available Ahmed A Elzatahry1,4, Abdullah M Al-Enizi1, Elsayed Ahmed Elsayed2,5, Rachel R Butorac3, Salem S Al-Deyab1, Mohammad AM Wadaan2, Alan H Cowley31Petrochemical Research Chair, Department of Chemistry, 2Chair of Advanced Proteomics & Cytomics Research, Faculty of Science, King Saud University, Riyadh, Kingdom of Saudi Arabia; 3Department of Chemistry and Biochemistry, University of Texas at Austin, Austin, TX, USA; 4Institute of Advanced Technology and New Materials, City for Scientific Research and Technology Applications, New Borg Alrab, Alexandria, Egypt; 5Natural & Microbial Products Department, National Research Centre, Dokki, Cairo, EgyptAbstract: This report concerns nanofiber composites that incorporate N-heterocyclic carbenes and the use of such composites for testing antimicrobial and antifungal activities. The nanofiber composites were produced by electrospinning mixtures of the gold chloride or gold acetate complexes of a bis(iminoacenaphthene (BIAN-supported NHC with aqueous solutions of polyvinyl alcohol (PVA. The products were characterized by scanning-electron microscopy, which revealed that nanofibers in the range of 250–300 nm had been produced. The biological activities of the nanofiber composites were tested against two Gram-positive bacteria, six Gram-negative bacteria, and two fungal strains. No activity was evident against the fungal strains. However, the gold chloride complex was found to be active against all the Gram-positive pathogens and one of the Gram-negative pathogens. It was also found that the activity of the produced nanofibers was localized and that no release of the bioactive compound from the nanofibers was evident. The demonstrated antimicrobial activities of these novel nanofiber composites render them potentially useful as wound dressings.Keywords: nanofiber, electrospinning, N-Heterocyclic carbene, biopolymer, antimicrobial

  3. Bioactive Polymeric Materials for Tissue Repair

    Directory of Open Access Journals (Sweden)

    Diane R. Bienek

    2017-01-01

    Full Text Available Bioactive polymeric materials based on calcium phosphates have tremendous appeal for hard tissue repair because of their well-documented biocompatibility. Amorphous calcium phosphate (ACP-based ones additionally protect against unwanted demineralization and actively support regeneration of hard tissue minerals. Our group has been investigating the structure/composition/property relationships of ACP polymeric composites for the last two decades. Here, we present ACP’s dispersion in a polymer matrix and the fine-tuning of the resin affects the physicochemical, mechanical, and biological properties of ACP polymeric composites. These studies illustrate how the filler/resin interface and monomer/polymer molecular structure affect the material’s critical properties, such as ion release and mechanical strength. We also present evidence of the remineralization efficacy of ACP composites when exposed to accelerated acidic challenges representative of oral environment conditions. The utility of ACP has recently been extended to include airbrushing as a platform technology for fabrication of nanofiber scaffolds. These studies, focused on assessing the feasibility of incorporating ACP into various polymer fibers, also included the release kinetics of bioactive calcium and phosphate ions from nanofibers and evaluate the biorelevance of the polymeric ACP fiber networks. We also discuss the potential for future integration of the existing ACP scaffolds into therapeutic delivery systems used in the precision medicine field.

  4. Mechanism of nanofiber crimp

    Directory of Open Access Journals (Sweden)

    Chen Rou-Xi

    2013-01-01

    Full Text Available Fabrication of crimped fibers has been caught much attention recently due to remarkable improvement surface-to-volume ratio. The precise mechanism of the fiber crimp is, however, rare and preliminary. This paper finds that pulsation of fibers is the key factor for fiber crimp, and its configuration (wave formation corresponds to its nature frequency after solidification. Crimping performance can be improved by temperature control of the uncrimped fibers. In the paper, polylactide/ dimethylfomamide solution is fabricated into crimped nanofibers by the bubble electrospinning, an approximate period- amplitude relationship of the wave formation is obtained.

  5. Bioinspired Design of Polycaprolactone Composite Nanofibers as Artificial Bone Extracellular Matrix for Bone Regeneration Application.

    Science.gov (United States)

    Gao, Xiang; Song, Jinlin; Zhang, Yancong; Xu, Xiao; Zhang, Siqi; Ji, Ping; Wei, Shicheng

    2016-10-07

    The design and development of functional biomimetic systems for programmed stem cell response is a field of topical interest. To mimic bone extracellular matrix, we present an innovative strategy for constructing drug-loaded composite nanofibrous scaffolds in this study, which could integrate multiple cues from calcium phosphate mineral, bioactive molecule, and highly ordered fiber topography for the control of stem cell fate. Briefly, inspired by mussel adhesion mechanism, a polydopamine (pDA)-templated nanohydroxyapatite (tHA) was synthesized and then surface-functionalized with bone morphogenetic protein-7-derived peptides via catechol chemistry. Afterward, the resulting peptide-loaded tHA (tHA/pep) particles were blended with polycaprolactone (PCL) solution to fabricate electrospun hybrid nanofibers with random and aligned orientation. Our research demonstrated that the bioactivity of grafted peptides was retained in composite nanofibers. Compared to controls, PCL-tHA/pep composite nanofibers showed improved cytocompatibility. Moreover, the incorporated tHA/pep particles in nanofibers could further facilitate osteogenic differentiation potential of human mesenchymal stem cells (hMSCs). More importantly, the aligned PCL-tHA/pep composite nanofibers showed more osteogenic activity than did randomly oriented counterparts, even under nonosteoinductive conditions, indicating excellent performance of biomimetic design in cell fate decision. After in vivo implantation, the PCL-tHA/pep composite nanofibers with highly ordered structure could significantly promote the regeneration of lamellar-like bones in a rat calvarial critical-sized defect. Accordingly, the presented strategy in our work could be applied for a wide range of potential applications in not only bone regeneration application but also pharmaceutical science.

  6. Reinforcement of polymeric nanofibers by ferritin nanoparticles

    Science.gov (United States)

    Shin, Min Kyoon; Kim, Sun I.; Kim, Seon Jeong; Kim, Sung-Kyoung; Lee, Haiwon

    2006-05-01

    Poly(vinyl alcohol) (PVA) nanofibers containing bimolecular ferritin nanoparticles exhibited the enhancement of elastic modulus as compared to pure PVA nanofibers due to chemical interactions between the ferritin and the PVA matrix. The elastic modulus of the nanofibers was measured using a three-point bending test employing an atomic force microscope (AFM). To improve the reliability of the AFM measurements, uniform nanofibers were oriented linearly on an AFM calibration grating by introducing parallel subelectrodes in an electrospinning system. The length to diameter ratio of the measured nanofibers was >16. The PVA nanofibers reinforced by ferritin are applicable as artificial muscles and actuators.

  7. Fabrication and Evaluation of Multilayer Nanofiber-Hydrogel Meshes with a Controlled Release Property

    Directory of Open Access Journals (Sweden)

    Rigumula Wu

    2015-07-01

    Full Text Available Controlled release drug delivery systems enable the sustained release of bioactive molecules, and increase bioavailability over an extended length of time. Biocompatible and biodegradable materials such as polycaprolactone (PCL nanofibers and alginate hydrogel play a significant role in designing controlled release systems. Prolonged release of bioactive molecules is observed when these polymer materials are used as matrices independently. However, there has not been a report in the literature that shows how different molecules are released at various rates over time. The goal of this study is to demonstrate a novel drug delivery system that has a property of releasing designated drugs at various rates over a defined length of time. We fabricated multilayer nanofiber-hydrogel meshes using electrospun PCL nanofiber and alginate hydrogel, and evaluated their controlled release properties. The multilayer meshes are composed of sandwiched layers of alternating PCL nanofibers and alginate hydrogel. Adenosine triphosphate (ATP, encapsulated in the designated hydrogel layers, is used as a mock drug for the release study. The exposed top layer of the meshes demonstrates a dramatically higher burst release and shorter release time compared to the deeper layers. Such properties of the different layers within the meshes can be employed to achieve the release of multiple drugs at different rates over a specified length of time.

  8. Ultrahigh Transmission Optical Nanofibers

    CERN Document Server

    Hoffman, J E; Grover, J A; Solano, P; Kordell, P R; Wong-Campos, J D; Orozco, L A; Rolston, S L

    2014-01-01

    We present a procedure for reproducibly fabricating ultrahigh transmission optical nanofibers (530 nm diameter and 84 mm stretch) with single-mode transmissions of 99.95 $ \\pm$ 0.02%, which represents a loss from tapering of 2.6 $\\,\\times \\,$ 10$^{-5}$ dB/mm when normalized to the entire stretch. When controllably launching the next family of higher-order modes on a fiber with 195 mm stretch, we achieve a transmission of 97.8 $\\pm$ 2.8%, which has a loss from tapering of 5.0 $\\,\\times \\,$ 10$^{-4}$ dB/mm when normalized to the entire stretch. Our pulling and transfer procedures allow us to fabricate optical nanofibers that transmit more than 400 mW in high vacuum conditions. These results, published as parameters in our previous work, present an improvement of two orders of magnitude less loss for the fundamental mode and an increase in transmission of more than 300% for higher-order modes, when following the protocols detailed in this paper. We extract from the transmission during the pull, the only reported...

  9. Coaxial electrospinning for encapsulation and controlled release of fragile water-soluble bioactive agents.

    Science.gov (United States)

    Jiang, Hongliang; Wang, Liqun; Zhu, Kangjie

    2014-11-10

    Coaxial electrospinning is a robust technique for one-step encapsulation of fragile, water-soluble bioactive agents, including growth factors, DNA and even living organisms, into core-shell nanofibers. The coaxial electrospinning process eliminates the damaging effects due to direct contact of the agents with organic solvents or harsh conditions during emulsification. The shell layer serves as a barrier to prevent the premature release of the water-soluble core contents. By varying the structure and composition of the nanofibers, it is possible to precisely modulate the release of the encapsulated agents. Promising work has been done with coaxially electrospun non-woven mats integrated with bioactive agents for use in tissue engineering, in local delivery and in wound healing, etc. This paper reviews the origins of the coaxial electrospinning method, its updated status and potential future developments for controlled release of the class of fragile, water-soluble bioactive agents.

  10. Mechanical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kjelstrup-Hansen, Jakob; Hansen, Ole; Rubahn, H.R.

    2006-01-01

    Intrinsic elastic and inelastic mechanical Properties of individual, self-assembled, quasi-single-crystalline para-hexaphenylene nanofibers supported on substrates with different hydrophobicities are investigated as well as the interplay between the fibers and the underlying substrates. We find f...... on a silicon substrate with a low-adhesion coating, whereas such motion on a noncoated substrate is limited to very short (sub-micrometer) nanofiber pieces due to strong adhesive forces....

  11. Touch- and Brush-Spinning of Nanofibers.

    Science.gov (United States)

    Tokarev, Alexander; Asheghali, Darya; Griffiths, Ian M; Trotsenko, Oleksandr; Gruzd, Alexey; Lin, Xin; Stone, Howard A; Minko, Sergiy

    2015-11-01

    Robust, simple, and scalable touch- and brush-spinning methods for the drawing of nanofibers, core-shell nanofibers, and their aligned 2D and 3D meshes using polymer solutions and melts are discussed.

  12. Characterization and Biocompatibility of Biopolyester Nanofibers

    OpenAIRE

    Tang Hui Ying; Tetsuji Yamaoka; Tadahisa Iwata; Daisuke Ishii

    2009-01-01

    Biodegradable nanofibers are expected to be promising scaffold materials for biomedical engineering, however, biomedical applications require control of the degradation behavior and tissue response of nanofiber scaffolds in vivo. For this purpose, electrospun nanofibers of poly(hydroxyalkanoate)s (PHAs) and poly(lactide)s (PLAs) were subjected to degradation tests in vitro and in vivo. In this review, characterization and biocompatibility of nanofibers derived from PHAs and PLAs are described...

  13. Bubbfil electrospinning of PA66/Cu nanofibers

    Directory of Open Access Journals (Sweden)

    Li Ya

    2016-01-01

    Full Text Available Different PA66/Cu nanofibers were prepared under various electrospinning parameters through bubbfil electrospinning. The process parameters were determined. Cuprum particles with different size were added to PA66 solution to produce PA6/66-Cu composite nanofibers. The influence of cuprum nanoparticle size on the PA66 nanofibers was analyzed.

  14. Polydopamine-Templated Hydroxyapatite Reinforced Polycaprolactone Composite Nanofibers with Enhanced Cytocompatibility and Osteogenesis for Bone Tissue Engineering.

    Science.gov (United States)

    Gao, Xiang; Song, Jinlin; Ji, Ping; Zhang, Xiaohong; Li, Xiaoman; Xu, Xiao; Wang, Mengke; Zhang, Siqi; Deng, Yi; Deng, Feng; Wei, Shicheng

    2016-02-10

    Nanohydroxyapatite (HA) synthesized by biomimetic strategy is a promising nanomaterial as bone substitute due to its physicochemical features similar to those of natural nanocrystal in bone tissue. Inspired by mussel adhesive chemistry, a novel nano-HA was synthesized in our work by employing polydopamine (pDA) as template under weak alkaline condition. Subsequently, the as-prepared pDA-templated HA (tHA) was introduced into polycaprolactone (PCL) matrix via coelectrospinning, and a bioactive tHA/PCL composite nanofiber scaffold was developed targeted at bone regeneration application. Our research showed that tHA reinforced PCL composite nanofibers exhibited favorable cytocompatibility at given concentration of tHA (0-10 w.t%). Compared to pure PCL and traditional nano-HA enriched PCL (HA/PCL) composite nanofibers, enhanced cell adhesion, spreading and proliferation of human mesenchymal stem cells (hMSCs) were observed on tHA/PCL composite nanofibers on account of the contribution of pDA present in tHA. More importantly, tHA nanoparticles exposed on the surface of composite nanofibers could further promote osteogenesis of hMSCs in vitro even in the absence of osteogenesis soluble inducing factors when compared to traditional HA/PCL scaffolds, which was supported by in vivo test as well according to the histological analysis. Overall, our study demonstrated that the developed tHA/PCL composite nanofibers with enhanced cytocompatibility and osteogenic capacity hold great potential as scaffolds for bone tissue engineering.

  15. Nanotech: propensity in foods and bioactives.

    Science.gov (United States)

    Kuan, Chiu-Yin; Yee-Fung, Wai; Yuen, Kah-Hay; Liong, Min-Tze

    2012-01-01

    Nanotechnology is seeing higher propensity in various industries, including food and bioactives. New nanomaterials are constantly being developed from both natural biodegradable polymers of plant and animal origins such as polysaccharides and derivatives, peptides and proteins, lipids and fats, and biocompatible synthetic biopolyester polymers such as polylactic acid (PLA), polyhydroxyalkonoates (PHA), and polycaprolactone (PCL). Applications in food industries include molecular synthesis of new functional food compounds, innovative food packaging, food safety, and security monitoring. The relevance of bioactives includes targeted delivery systems with improved bioavailability using nanostructure vehicles such as association colloids, lipid based nanoencapsulator, nanoemulsions, biopolymeric nanoparticles, nanolaminates, and nanofibers. The extensive use of nanotechnology has led to the need for parallel safety assessment and regulations to protect public health and adverse effects to the environment. This review covers the use of biopolymers in the production of nanomaterials and the propensity of nanotechnology in food and bioactives. The exposure routes of nanoparticles, safety challenges, and measures undertaken to ensure optimal benefits that outweigh detriments are also discussed.

  16. Chitin nanofibers: preparations, modifications, and applications

    Science.gov (United States)

    Ifuku, Shinsuke; Saimoto, Hiroyuki

    2012-05-01

    Chitin nanofibers are prepared from the exoskeletons of crabs and prawns by a simple mechanical treatment after the removal of proteins and minerals. The obtained nanofibers have fine nanofiber networks with a uniform width of approximately 10-20 nm and a high aspect ratio. The method used for chitin-nanofiber isolation is also successfully applied to the cell walls of mushrooms. They form a complex with glucans on the fiber surface. A grinder, a Star Burst atomization system, and a high speed blender are all used in the mechanical treatment to convert chitin to nanofibers. Mechanical treatment under acidic conditions is the key to facilitate fibrillation. At pH 3-4, the cationization of amino groups on the fiber surface assists nano-fibrillation by electrostatic repulsive force. By applying this finding, we also prepared chitin nanofibers from dry chitin powder. Chitin nanofibers are acetylated to modify their surfaces. The acetyl DS can be controlled from 1 to 3 by changing the reaction time. An acetyl group is introduced heterogeneously from the surface to the core. Nanofiber morphology is maintained even in the case of high acetyl DS. Optically transparent chitin nanofiber composites are prepared with 11 different types of acrylic resins. Due to the nano-sized structure, all of the composites are highly transparent. Chitin nanofibers significantly increase the Young's moduli and the tensile strengths and decrease the thermal expansion of all acrylic resins due to the reinforcement effect of chitin nanofibers. Chitin nanofibers show chiral separation ability. The chitin nanofiber membrane transports the d-isomer of glutamic acid, phenylalanine, and lysine from the corresponding racemic amino acid mixtures faster than the corresponding l-isomer. The chitin nanofibers improve clinical symptoms and suppress ulcerative colitis in a DSS-induced mouse model of acute ulcerative colitis. Moreover, chitin nanofibers suppress myeloperoxidase activation in the colon and

  17. One-pot synthesis of macro-mesoporous bioactive glasses/polylactic acid for bone tissue engineering.

    Science.gov (United States)

    Han, Xiao; Wang, Dan; Chen, Xiang; Lin, Huiming; Qu, Fengyu

    2014-10-01

    The macro-mesoporous bioactive glasses/polylactic acid nanofibers were synthesized via electrospun method followed by acid treatment processing. It was identified to be an effective and simple synthetic strategy to form the uniform nanofibers about 350 nm in size. The non-ionic triblock copolymer, poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123), was used as the template for mesoporous structure (5 nm) and the macroporous structure about 10 μm in size derived from the overlapping of the nanofibers. Furthermore, the surface hydrophilic-hydrophobic property can be adjusted by varying the amount of mesoporous bioglass precursor (MBG-p). With the outstanding structure characters and the suitable hydrophilic property, these nanofiber composites show controlled drug release and the fast hydroxyapatite (HAP) mineralization performance. Herein, the novel materials are expected to have potential application for bone tissue engineering.

  18. Electrospinning of Nanofibers for Energy Applications.

    Science.gov (United States)

    Sun, Guiru; Sun, Liqun; Xie, Haiming; Liu, Jia

    2016-07-02

    With global concerns about the shortage of fossil fuels and environmental issues, the development of efficient and clean energy storage devices has been drastically accelerated. Nanofibers are used widely for energy storage devices due to their high surface areas and porosities. Electrospinning is a versatile and efficient fabrication method for nanofibers. In this review, we mainly focus on the application of electrospun nanofibers on energy storage, such as lithium batteries, fuel cells, dye-sensitized solar cells and supercapacitors. The structure and properties of nanofibers are also summarized systematically. The special morphology of nanofibers prepared by electrospinning is significant to the functional materials for energy storage.

  19. Aligned Layers of Silver Nano-Fibers

    Directory of Open Access Journals (Sweden)

    Andrii B. Golovin

    2012-02-01

    Full Text Available We describe a new dichroic polarizers made by ordering silver nano-fibers to aligned layers. The aligned layers consist of nano-fibers and self-assembled molecular aggregates of lyotropic liquid crystals. Unidirectional alignment of the layers is achieved by means of mechanical shearing. Aligned layers of silver nano-fibers are partially transparent to a linearly polarized electromagnetic radiation. The unidirectional alignment and density of the silver nano-fibers determine degree of polarization of transmitted light. The aligned layers of silver nano-fibers might be used in optics, microwave applications, and organic electronics.

  20. Preparation of chitosan nanofiber tube by electrospinning.

    Science.gov (United States)

    Matsuda, Atsushi; Kagata, Go; Kino, Rikako; Tanaka, Junzo

    2007-03-01

    Water-insoluble chitosan nanofiber sheets and tubes coated with chitosan-cast film were prepared by electrospinning. When as-spun chitosan nanofiber sheets and tubes were immersed in 28% ammonium aqueous solution, they became insoluble in water and showed nanofiber structures confirmed by SEM micrography. Mechanical properties of chitosan nanofiber sheets and tubes were improved by coating with chitosan-cast film, which gave them a compressive strength higher than that of crab-tendon chitosan, demonstrating that chitosan nanofiber tubes coated with chitosan-cast film are usable as nerve-regenerative guide tubes.

  1. Electrospinning of Nanofibers for Energy Applications

    Directory of Open Access Journals (Sweden)

    Guiru Sun

    2016-07-01

    Full Text Available With global concerns about the shortage of fossil fuels and environmental issues, the development of efficient and clean energy storage devices has been drastically accelerated. Nanofibers are used widely for energy storage devices due to their high surface areas and porosities. Electrospinning is a versatile and efficient fabrication method for nanofibers. In this review, we mainly focus on the application of electrospun nanofibers on energy storage, such as lithium batteries, fuel cells, dye-sensitized solar cells and supercapacitors. The structure and properties of nanofibers are also summarized systematically. The special morphology of nanofibers prepared by electrospinning is significant to the functional materials for energy storage.

  2. Oriented nanofibers embedded in a polymer matrix

    Science.gov (United States)

    Barrera, Enrique V. (Inventor); Rodriguez-Macias, Fernando J. (Inventor); Lozano, Karen (Inventor); Chibante, Luis Paulo Felipe (Inventor); Stewart, David Harris (Inventor)

    2011-01-01

    A method of forming a composite of embedded nanofibers in a polymer matrix is disclosed. The method includes incorporating nanofibers in a plastic matrix forming agglomerates, and uniformly distributing the nanofibers by exposing the agglomerates to hydrodynamic stresses. The hydrodynamic said stresses force the agglomerates to break apart. In combination or additionally elongational flow is used to achieve small diameters and alignment. A nanofiber reinforced polymer composite system is disclosed. The system includes a plurality of nanofibers that are embedded in polymer matrices in micron size fibers. A method for producing nanotube continuous fibers is disclosed. Nanofibers are fibrils with diameters of 100 nm, multiwall nanotubes, single wall nanotubes and their various functionalized and derivatized forms. The method includes mixing a nanofiber in a polymer; and inducing an orientation of the nanofibers that enables the nanofibers to be used to enhance mechanical, thermal and electrical properties. Orientation is induced by high shear mixing and elongational flow, singly or in combination. The polymer may be removed from said nanofibers, leaving micron size fibers of aligned nanofibers.

  3. Electrospinning of Biocompatible Nanofibers

    Science.gov (United States)

    Coughlin, Andrew J.; Queen, Hailey A.; McCullen, Seth D.; Krause, Wendy E.

    2006-03-01

    Artificial scaffolds for growing cells can have a wide range of applications including wound coverings, supports in tissue cultures, drug delivery, and organ and tissue transplantation. Tissue engineering is a promising field which may resolve current problems with transplantation, such as rejection by the immune system and scarcity of donors. One approach to tissue engineering utilizes a biodegradable scaffold onto which cells are seeded and cultured, and ideally develop into functional tissue. The scaffold acts as an artificial extracellular matrix (ECM). Because a typical ECM contains collagen fibers with diameters of 50-500 nm, electrostatic spinning (electrospinning) was used to mimic the size and structure of these fibers. Electrospinning is a novel way of spinning a nonwoven web of fibers on the order of 100 nm, much like the web of collagen in an ECM. We are investigating the ability of several biocompatible polymers (e.g., chitosan and polyvinyl alcohol) to form defect-free nanofiber webs and are studying the influence of the zero shear rate viscosity, molecular weight, entanglement concentration, relaxation time, and solvent on the resulting fiber size and morphology.

  4. In vitro evaluation of the effects of electrospun PCL nanofiber mats containing the microalgae Spirulina (Arthrospira) extract on primary astrocytes.

    Science.gov (United States)

    Kim, Sung Hoon; Shin, Chungwhan; Min, Seul Ki; Jung, Sang-Myung; Shin, Hwa Sung

    2012-02-01

    The blue-green microalgae, Spirulina, a harmless food and pharmaceutical additive, has several bioactive compounds that have therapeutic functions. Polycaprolactone (PCL) is a biocompatible and biodegradable polymer that has widely been used for tissue engineering. The electrospun PCL nanofiber containing Spirulina (PCL-Spirulina) was fabricated and tested as a potential extracellular matrix material for a culture of primary astrocytes, which play important roles in CNS injured systems. Spirulina extract was observed to increase growth and metabolic activity of rat primary astrocytes without any harm once added to the culture media. However, PCL-Spirulina nanofiber was proven to alleviate astrocyte activity. Through this research and to the best of our knowledge, we first suggest a novel composite nanomaterial, an electrospun PCL-Spirulina nanofiber that could be used to treat CNS injured systems. Copyright © 2011 Elsevier B.V. All rights reserved.

  5. Tailoring Supramolecular Nanofibers for Air Filtration Applications.

    Science.gov (United States)

    Weiss, Daniel; Skrybeck, Dominik; Misslitz, Holger; Nardini, David; Kern, Alexander; Kreger, Klaus; Schmidt, Hans-Werner

    2016-06-15

    The demand of new materials and processes for nanofiber fabrication to enhance the performance of air filters is steadily increasing. Typical approaches to obtain nanofibers are based on top-down processes such as melt blowing, centrifugal spinning, and electrospinning of polymer materials. However, fabrication of polymer nanofibers is limited with respect to either a sufficiently high throughput or the smallest achievable fiber diameter. This study reports comprehensively on a fast and simple bottom-up process to prepare supramolecular nanofibers in situ inside viscose/polyester microfiber nonwovens. Here, selected small molecules of the materials class of 1,3,5-benzenetrisamides are employed. The microfiber-nanofiber composites exhibit a homogeneous nanofiber distribution and morphology throughout the entire nonwoven scaffold. Small changes in molecular structure and processing solvent have a strong influence on the final nanofiber diameter and diameter distribution and, consequently, on the filtration performance. Choosing proper processing conditions, microfiber-nanofiber composites with surprisingly high filtration efficiencies of particulate matter are obtained. In addition, the microfiber-nanofiber composite integrity at elevated temperatures was determined and revealed that the morphology of supramolecular nanofibers is maintained compared to that of the utilized polymer nonwoven.

  6. Recent advances of basic materials to obtain electrospun polymeric nanofibers for medical applications

    Science.gov (United States)

    Manea, L. R.; Hristian, L.; Leon, A. L.; Popa, A.

    2016-08-01

    The most important applications of electrospun polymeric nanofibers are by far those from biomedical field. From the biological point of view, almost all the human tissues and organs consist of nanofibroas structures. The examples include the bone, dentine, cartilage, tendons and skin. All these are characterized through different fibrous structures, hierarchically organized at nanometer scale. Electrospinning represents one of the nanotechnologies that permit to obtain such structures for cell cultures, besides other technologies, such as selfassembling and phase separation technologies. The basic materials used to produce electrospun nanofibers can be natural or synthetic, having polymeric, ceramic or composite nature. These materials are selected depending of the nature and structure of the tissue meant to be regenerated, namely: for the regeneration of smooth tissues regeneration one needs to process through electrospinning polymeric basic materials, while in order to obtain the supports for the regeneration of hard tissues one must mainly use ceramic materials or composite structures that permit imbedding the bioactive substances in distinctive zones of the matrix. This work presents recent studies concerning basic materials used to obtain electrospun polymeric nanofibers, and real possibilities to produce and implement these nanofibers in medical bioengineering applications.

  7. Multifunctional Nanofibers towards Active Biomedical Therapeutics

    Directory of Open Access Journals (Sweden)

    Jaishri Sharma

    2015-02-01

    Full Text Available One-dimensional (1-D nanostructures have attracted enormous research interest due to their unique physicochemical properties and wide application potential. These 1-D nanofibers are being increasingly applied to biomedical fields owing to their high surface area-to-volume ratio, high porosity, and the ease of tuning their structures, functionalities, and properties. Many biomedical nanofiber reviews have focused on tissue engineering and drug delivery applications but have very rarely discussed their use as wound dressings. However, nanofibers have enormous potential as wound dressings and other clinical applications that could have wide impacts on the treatment of wounds. Herein, the authors review the main fabrication methods of nanofibers as well as requirements, strategies, and recent applications of nanofibers, and provide perspectives of the challenges and opportunities that face multifunctional nanofibers for active therapeutic applications.

  8. Bioactivation of particles

    Energy Technology Data Exchange (ETDEWEB)

    Pinaud, Fabien (Berkeley, CA); King, David (San Francisco, CA); Weiss, Shimon (Los Angeles, CA)

    2011-08-16

    Particles are bioactivated by attaching bioactivation peptides to the particle surface. The bioactivation peptides are peptide-based compounds that impart one or more biologically important functions to the particles. Each bioactivation peptide includes a molecular or surface recognition part that binds with the surface of the particle and one or more functional parts. The surface recognition part includes an amino-end and a carboxy-end and is composed of one or more hydrophobic spacers and one or more binding clusters. The functional part(s) is attached to the surface recognition part at the amino-end and/or said carboxy-end.

  9. Effect of airflow on nanofiber yarn spinning

    Directory of Open Access Journals (Sweden)

    He Jian-Xin

    2015-01-01

    Full Text Available The paper proposes a new air-jet spinning method for the preparation of continuous twisted nanofiber yarns. The nozzle-twisting device is designed to create the 3-D rotating airflow to twist nanofiber bundles. The airflow characteristics inside the twisting chamber are studied numerically. The airflow field distribution and its effect on nanofiber yarn spinning at different pressures are also discussed.

  10. Nanofiber filter media for air filtration

    Science.gov (United States)

    Raghavan, Bharath Kumar

    Nanofibers have higher capture efficiencies in comparison to microfibers in the submicron particle size range of 100-500 nm because of small fiber diameter and increased surface area of the fibers. Pressure drop across the filter increases tremendously with decrease in fiber diameter in the continuum flow regime. Nanofibers with fiber diameter less than 300 nm are in the slip flow regime as a consequence of which steep increase in pressure drop is considerably reduced due to slip effect. The outlet or inlet gases have broad range of particle size distribution varying from few micrometers to nanometers. The economic benefits include capture of a wide range of particle sizes in the gas streams using compact filters composed of nanofibers and microfibers. Electrospinning technique was used to successfully fabricate polymeric and ceramic nanofibers. The nanofibers were long, continuous, and flexible with diameters in the range of 200--300 nm. Nanofibers were added to the filter medium either by mixing microfibers and nanofibers or by directly electrospinning nanofibers as thin layer on the surface of the microfiber filter medium. Experimental results showed that either by mixing Nylon 6 nanofibers with B glass fibers or by electrospinning Nylon 6 nanofibers as a thin layer on the surface of the microfiber medium in the surface area ratio of 1 which is 0.06 g of nanofibers for 2 g of microfibers performed better than microfiber filter media in air filtration tests. This improved performance is consistent with numerical modeling. The particle loading on a microfibrous filter were studied for air filtration tests. The experimental and modeling results showed that both pressure drop and capture efficiency increased with loading time. Nanofiber filter media has potential applications in many filtration applications and one of them being hot gas filtration. Ceramic nanofibers made of alumina and titania nanofibers can withstand in the range of 1000°C. Ceramic nanofibers

  11. Nickel nanofibers synthesized by the electrospinning method

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Yi [School of Materials Science and Engineering, Hefei University of Technology, Anhui 230000 (China); Zhang, Xuebin, E-mail: zzhhxxbb@126.com [School of Materials Science and Engineering, Hefei University of Technology, Anhui 230000 (China); Zhu, Yajun; Li, Bin; Wang, Yang; Zhang, Jingcheng; Feng, Yi [School of Materials Science and Engineering, Hefei University of Technology, Anhui 230000 (China)

    2013-07-15

    Highlights: ► The nickel nanofibers have been obtained by electrospinning method. ► The nickel nanofibers had rough surface which was consisted of mass nanoparticles. ► The average diameter of nickel nanofibers is about 135 nm and high degree of crystallization. ► The Hc, Ms, and Mr were estimated to be 185 Oe, 51.9 and 16.9 emu/g respectively. - Abstract: In this paper, nickel nanofibers were prepared by electrospinning polyvinyl alcohol/nickel nitrate precursor solution followed by high temperature calcination in air and deoxidation in hydrogen atmosphere. The thermal stability of the as-electrospun PVA/Ni(NO{sub 3}){sub 2} composite nanofibers were characterized by TG–DSC. The morphologies and structures of the as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field-emission scanning electronmicroscope (FE-SEM) and field-emission transmission electron microscopy (FE-TEM). The hysteresis loops (M–H loops) were measured by Physical Property Measurement System (PPMS). The results indicate that: the PVA and the nickel nitrate were almost completely decomposed at 460 °C and the products were pure nickel nanofibers with face-centered cubic (fcc) structure. Furthermore, the as-prepared nickel nanofibers had a continuous structure with rough surface and high degree of crystallization. The average diameter of nickel nanofibers was about 135 nm. The nanofibers showed a stronger coercivity of 185 Oe than value of bulk nickel.

  12. Magnetic nanofiber composite materials and devices using same

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xing; Zhou, Ziyao

    2017-04-11

    A nonreciprocal device is described. It includes a housing, a waveguide layer and at least one layer of magnetic nanofiber composite. The magnetic nanofiber composite layer is made up of a polymer base layer, a dielectric matrix comprising magnetic nanofibers. The nanofibers have a high aspect ratio and wherein said dielectric matrix is embedded in the polymer base layer.

  13. Method of manufacturing tin-doped indium oxide nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Ozcan, Soydan; Naskar, Amit K

    2017-06-06

    A method of making indium tin oxide nanofibers includes the step of mixing indium and tin precursor compounds with a binder polymer to form a nanofiber precursor composition. The nanofiber precursor composition is co-formed with a supporting polymer to form a composite nanofiber having a precursor composition nanofiber completely surrounded by the supporting polymer composition. The supporting polymer composition is removed from the composite nanofiber to expose the precursor composition nanofiber. The precursor composition nanofiber is then heated in the presence of oxygen such as O.sub.2 to form indium tin oxide and to remove the binder polymer to form an indium tin oxide nanofiber. A method of making metal oxide nanofibers is also disclosed.

  14. Alkylated graphene nanosheet composites with polyaniline nanofibers.

    Science.gov (United States)

    Grinou, Ali; Yun, Young Soo; Cho, Se Youn; Jin, Hyoung-Joon

    2011-07-01

    We demonstrate a simple method to prepare alkylated graphene/polyaniline composites (a-GR/PANI) using solution mixing of exfoliated alkyl Iodododecane treated graphene oxide sheets with polyaniline nanofiber; polyaniline nanofibers (PANI) prepared by using rapid mixing polymerization significantly improve the processibility of polyaniline and its performance in many conventional applications. Also, polyaniline nanofibers exhibit excellent water dispersibility due to their uniform nanofiber morphology. Morphological study using SEM and TEM analysis showed that the fibrous PANI in the composites a-GR/PANI mainly adsorbed onto the surface or intercalated between the graphene sheets, due especially to the good interfacial interaction between the alkylated gaphene and the polyaniline nanofibers. The existence of polyaniline nanofibers on the surface of the garphene and the alkylated graphene sheets was confirmed by using FT-IR, FT-Raman and X-ray diffraction analysis. Due to the good interfacial interaction between the alkylated graphene and the polyanilines nanofibers, the composite (a-GR/PANI) exhibited excellent dispersion stability in DMF compared to the same composite (GR/PANI) without alkylation. The electrical conductivity of the (GR/PANI) composite was 9% higher than that of pure PANI and the same weight percent for the composite after alkylation was 13% higher than that of pure PANI nanofibers.

  15. Fabrication of unsmooth bamboo-like nanofibers

    Directory of Open Access Journals (Sweden)

    Liu Zhi

    2015-01-01

    Full Text Available Effect of post drawing on morphology of bubbfil-spun polyvinyl alcohol nanofibers was firstly investigated. Bamboo-like nanofibers were observed after drawing. The increase of surface area of the unsmooth fibers has many potential applications in various fields.

  16. Novel Synthesis of Aluminium Oxide Nanofibers

    Science.gov (United States)

    2001-11-01

    UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP012177 TITLE: Novel Synthesis of Aluminium Oxide Nanofibers DISTRIBUTION...ADP012174 thru ADP012259 UNCLASSIFIED Mat. Res. Soc. Symp. Proc. Vol. 703 © 2002 Materials Research Society V1.8 Novel Synthesis of Aluminium Oxide Nanofibers

  17. Electrospun MOF nanofibers as hydrogen storage media

    CSIR Research Space (South Africa)

    Ren, Jianwei

    2015-06-01

    Full Text Available In this study, Zr-MOF and Cr-MOF were chosen as representatives of the developed MOFs in our laboratory and were incorporated into electrospun nanofibers. The obtained MOF nanofibers composites were evaluated as hydrogen storage media. The results...

  18. Growth of Y-shaped Carbon Nanofibers from Ethanol Flames

    Directory of Open Access Journals (Sweden)

    Cheng Jin

    2008-01-01

    Full Text Available Abstract Y-shaped carbon nanofibers as a multi-branched carbon nanostructure have potential applications in electronic devices. In this article, we report that several types of Y-shaped carbon nanofibers are obtained from ethanol flames. These Y-shaped carbon nanofibers have different morphologies. According to our experimental results, the growth mechanism of Y-shaped carbon nanofibers has been discussed and a possible growth model of Y-shaped carbon nanofibers has been proposed.

  19. A novel method for fabrication of fascinated nanofiber yarns

    Directory of Open Access Journals (Sweden)

    Liu Hong-Yan

    2015-01-01

    Full Text Available Potential applications of nanofibers as a new-generation of material will be realized if suitable nanofiber yarns become available. Electrospinning has been widely accepted as a feasible technique for the fabrication of continuous nanofiber yarns. However its low output limited its industrial applications. This paper presents a new processing approach to fabrication of fascinated nanofiber yarns which possess excellent properties of nanofibers while enhancing its mechanical strength by the core yarn.

  20. Printed second harmonic active organic nanofiber arrays

    DEFF Research Database (Denmark)

    Balzer, Frank; Brewer, Jonathan R.; Kjelstrup-Hansen, Jakob

    2007-01-01

    Organic nanofibers from semiconducting conjugated molecules are well suited to meet refined demands for advanced applications in future optoelectronics and nanophotonics. In contrast to their inorganic counterparts, the properties of organic nanowires can be tailored at the molecular level...... investigated nanofibers as grown via organic epitaxy. In the present work we show how chemically changing the functionalizing end groups leads to a huge increase of second order susceptibility, making the nanofibers technologically very interesting as efficient frequency doublers. For that the nanofibers have...... to be transferred either as individual entities or as ordered arrays onto specific target substrates. Here, we study the applicability of contact printing as a possible route to non-destructive nanofiber transfer....

  1. Characterization and Biocompatibility of Biopolyester Nanofibers

    Directory of Open Access Journals (Sweden)

    Tang Hui Ying

    2009-10-01

    Full Text Available Biodegradable nanofibers are expected to be promising scaffold materials for biomedical engineering, however, biomedical applications require control of the degradation behavior and tissue response of nanofiber scaffolds in vivo. For this purpose, electrospun nanofibers of poly(hydroxyalkanoates (PHAs and poly(lactides (PLAs were subjected to degradation tests in vitro and in vivo. In this review, characterization and biocompatibility of nanofibers derived from PHAs and PLAs are described. In particular, the effects of the crystalline structure of poly[(R-3-hydroxybutyrate], stereocomplex structure of PLA, and monomer composition of PHA on the degradation behaviors are described in detail. These studies show the potential of biodegradable polyester nanofibers as scaffold material, for which suitable degradation rate and regulated interaction with surrounding tissues are required.

  2. Bioactives from microalgal dinoflagellates.

    Science.gov (United States)

    Gallardo-Rodríguez, J; Sánchez-Mirón, A; García-Camacho, F; López-Rosales, L; Chisti, Y; Molina-Grima, E

    2012-01-01

    Dinoflagellate microalgae are an important source of marine biotoxins. Bioactives from dinoflagellates are attracting increasing attention because of their impact on the safety of seafood and potential uses in biomedical, toxicological and pharmacological research. Here we review the potential applications of dinoflagellate toxins and the methods for producing them. Only sparing quantities of dinoflagellate toxins are generally available and this hinders bioactivity characterization and evaluation in possible applications. Approaches to production of increased quantities of dinoflagellate bioactives are discussed. Although many dinoflagellates are fragile and grow slowly, controlled culture in bioreactors appears to be generally suitable for producing many of the metabolites of interest.

  3. Preparation and characterization of multi-layer biodegradable nanofibers by coaxial electrospinning and their potential for tissue engineering

    Science.gov (United States)

    Liu, Wenwen

    focused ion beam-scanning electron microscopy (FIB-SEM), super-resolution structured illumination microscopy (SR-SIM) and nanoscale-infrared spectroscopy (nano-IR), have been explored to investigate the internal structure in singles fibers. Additionally, the potential application of coaxial electrospinning in the fabrication of bioactive scaffolds for tissue engineering has been studied. Different kinds of coaxial nanofibers were fabricated and studied to determine the potential for BSA and growth factor release and some preliminary results were obtained.

  4. Optical Properties of GaSb Nanofibers

    Directory of Open Access Journals (Sweden)

    Perez-Bergquist Alejandro

    2011-01-01

    Full Text Available Abstract Amorphous GaSb nanofibers were obtained by ion beam irradiation of bulk GaSb single-crystal wafers, resulting in fibers with diameters of ~20 nm. The Raman spectra and photoluminescence (PL of the ion irradiation-induced nanofibers before and after annealing were studied. Results show that the Raman intensity of the GaSb LO phonon mode decreased after ion beam irradiation as a result of the formation of the amorphous nanofibers. A new mode is observed at ~155 cm-1 both from the unannealed and annealed GaSb nanofiber samples related to the A1g mode of Sb–Sb bond vibration. Room temperature PL measurements of the annealed nanofibers present a wide feature band at ~1.4–1.6 eV. The room temperature PL properties of the irradiated samples presents a large blue shift compared to bulk GaSb. Annealed nanofibers and annealed nanofibers with Au nanodots present two different PL peaks (400 and 540 nm, both of which may originate from Ga or O vacancies in GaO. The enhanced PL and new band characteristics in nanostructured GaSb suggest that the nanostructured fibers may have unique applications in optoelectronic devices.

  5. Functional Self-Assembled Nanofibers by Electrospinning

    Science.gov (United States)

    Greiner, A.; Wendorff, J. H.

    Electrospinning constitutes a unique technique for the production of nanofibers with diameters down to the range of a few nanometers. In strong contrast to conventional fiber producing techniques, it relies on self-assembly processes driven by the Coulomb interactions between charged elements of the fluids to be spun to nanofibers. The transition from a macroscopic fluid object such as a droplet emerging from a die to solid nanofibers is controlled by a set of complex physical instability processes. They give rise to extremely high extensional deformations and strain rates during fiber formation causing among others a high orientational order in the nanofibers as well as enhanced mechanical properties. Electrospinning is predominantly applied to polymer based materials including natural and synthetic polymers, but, more recently, its use has been extended towards the production of metal, ceramic and glass nanofibers exploiting precursor routes. The nanofibers can be functionalized during electrospinning by introducing pores, fractal surfaces, by incorporating functional elements such as catalysts, quantum dots, drugs, enzymes or even bacteria. The production of individual fibers, random nonwovens, or orientationally highly ordered nonwovens is achieved by an appropriate selection of electrode configurations. Broad areas of application exist in Material and Life Sciences for such nanofibers, including not only optoelectronics, sensorics, catalysis, textiles, high efficiency filters, fiber reinforcement but also tissue engineering, drug delivery, and wound healing. The basic electrospinning process has more recently been extended towards compound co-electrospinning and precision deposition electrospinning to further broaden accessible fiber architectures and potential areas of application.

  6. Biofunctionalized Nanofibers Using Arthrospira (Spirulina Biomass and Biopolymer

    Directory of Open Access Journals (Sweden)

    Michele Greque de Morais

    2015-01-01

    Full Text Available Electrospun nanofibers composed of polymers have been extensively researched because of their scientific and technical applications. Commercially available polyhydroxybutyrate (PHB and polyhydroxybutyrate-co-valerate (PHB-HV copolymers are good choices for such nanofibers. We used a highly integrated method, by adjusting the properties of the spinning solutions, where the cyanophyte Arthrospira (formally Spirulina was the single source for nanofiber biofunctionalization. We investigated nanofibers using PHB extracted from Spirulina and the bacteria Cupriavidus necator and compared the nanofibers to those made from commercially available PHB and PHB-HV. Our study assessed nanofiber formation and their selected thermal, mechanical, and optical properties. We found that nanofibers produced from Spirulina PHB and biofunctionalized with Spirulina biomass exhibited properties which were equal to or better than nanofibers made with commercially available PHB or PHB-HV. Our methodology is highly promising for nanofiber production and biofunctionalization and can be used in many industrial and life science applications.

  7. Biofunctionalized Nanofibers Using Arthrospira (Spirulina) Biomass and Biopolymer

    Science.gov (United States)

    de Morais, Michele Greque; Stillings, Christopher; Dersch, Roland; Rudisile, Markus; Pranke, Patrícia; Costa, Jorge Alberto Vieira; Wendorff, Joachim

    2015-01-01

    Electrospun nanofibers composed of polymers have been extensively researched because of their scientific and technical applications. Commercially available polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHB-HV) copolymers are good choices for such nanofibers. We used a highly integrated method, by adjusting the properties of the spinning solutions, where the cyanophyte Arthrospira (formally Spirulina) was the single source for nanofiber biofunctionalization. We investigated nanofibers using PHB extracted from Spirulina and the bacteria Cupriavidus necator and compared the nanofibers to those made from commercially available PHB and PHB-HV. Our study assessed nanofiber formation and their selected thermal, mechanical, and optical properties. We found that nanofibers produced from Spirulina PHB and biofunctionalized with Spirulina biomass exhibited properties which were equal to or better than nanofibers made with commercially available PHB or PHB-HV. Our methodology is highly promising for nanofiber production and biofunctionalization and can be used in many industrial and life science applications. PMID:25667931

  8. Biofunctionalized nanofibers using Arthrospira (Spirulina) biomass and biopolymer.

    Science.gov (United States)

    de Morais, Michele Greque; Stillings, Christopher; Dersch, Roland; Rudisile, Markus; Pranke, Patrícia; Costa, Jorge Alberto Vieira; Wendorff, Joachim

    2015-01-01

    Electrospun nanofibers composed of polymers have been extensively researched because of their scientific and technical applications. Commercially available polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHB-HV) copolymers are good choices for such nanofibers. We used a highly integrated method, by adjusting the properties of the spinning solutions, where the cyanophyte Arthrospira (formally Spirulina) was the single source for nanofiber biofunctionalization. We investigated nanofibers using PHB extracted from Spirulina and the bacteria Cupriavidus necator and compared the nanofibers to those made from commercially available PHB and PHB-HV. Our study assessed nanofiber formation and their selected thermal, mechanical, and optical properties. We found that nanofibers produced from Spirulina PHB and biofunctionalized with Spirulina biomass exhibited properties which were equal to or better than nanofibers made with commercially available PHB or PHB-HV. Our methodology is highly promising for nanofiber production and biofunctionalization and can be used in many industrial and life science applications.

  9. Electrical Impedance Measurements of PZT Nanofiber Sensors

    Directory of Open Access Journals (Sweden)

    Richard Galos

    2017-01-01

    Full Text Available Electrical impedance measurements of PZT nanofiber sensors were performed using a variety of methods over a frequency spectrum ranging from DC to 1.8 GHz. The nanofibers formed by electrospinning with diameters ranging from 10 to 150 nm were collected and integrated into sensors using microfabrication techniques. Special matching circuits with ultrahigh input impedance were fabricated to produce low noise, measurable sensor outputs. Material properties including resistivity and dielectric constant are derived from the impedance measurements. The resulting material properties are also compared with those of individual nanofibers being tested using conductive AFM and Scanning Conductive Microscopy.

  10. Self-assembling peptide nanofiber hydrogels for central nervous system regeneration

    Science.gov (United States)

    Liu, Xi; Pi, Bin; Wang, Hui; Wang, Xiu-Mei

    2015-03-01

    Central nervous system (CNS) presents a complex regeneration problem due to the inability of central neurons to regenerate correct axonal and dendritic connections. However, recent advances in developmental neurobiology, cell signaling, cell-matrix interaction, and biomaterials technologies have forced a reconsideration of CNS regeneration potentials from the viewpoint of tissue engineering and regenerative medicine. The applications of a novel tissue regeneration-inducing biomaterial and stem cells are thought to be critical for the mission. The use of peptide nanofiber hydrogels in cell therapy and tissue engineering offers promising perspectives for CNS regeneration. Self-assembling peptide undergo a rapid transformation from liquid to gel upon addition of counterions or pH adjustment, directly integrating with the host tissue. The peptide nanofiber hydrogels have mechanical properties that closely match the native central nervous extracellular matrix, which could enhance axonal growth. Such materials can provide an optimal three dimensional microenvironment for encapsulated cells. These materials can also be tailored with bioactive motifs to modulate the wound environment and enhance regeneration. This review intends to detail the recent status of self-assembling peptide nanofiber hydrogels for CNS regeneration.

  11. Lamination of microfibrous PLGA fabric by electrospinning a layer of collagen-hydroxyapatite composite nanofibers for bone tissue engineering.

    Science.gov (United States)

    Kwon, Gi-Wan; Gupta, Kailash Chandra; Jung, Kyung-Hye; Kang, Inn-Kyu

    2017-01-01

    To mimic the muscle inspired cells adhesion through proteins secretion, the lamination of collagen-hydroxyapatite nanorod (nHA) composite nanofibers has been carried out successfully on polydopamine (PDA)-coated microfibrous polylactide-co-glycolide (PLGA) fabrics. The lamination of collagen-hydroxyapatite composite nanofibers on polydopamine-coated microfibrous PLGA fabrics was carried through electrospinning the solution of collagen containing L-glutamic acid-grafted hydroxyapatite nanorods (nHA-GA) at a flow rate of 1.5 mL/h and an applied voltage of 15 kV. In comparison to pristine PLGA, dopamine-coated PLGA and collagen-hydroxyapatite composite nanofiber lamination has produced more wettable surfaces and surface wettability is found to higher with dopamine-coated PLGA fabrics then pristine PLGA. The SEM micrographs have clearly indicated that the lamination of polydopamine-coated PLGA fabric with collagen-hydroxyapatite composite nanofibers has shown increased adhesion of MC3T3E1 cells in comparison to pristine PLGA fabrics. The results of these studies have clearly demonstrated that collagen-nHA composites fibers may be used to create bioactive 3D scaffolds using PLGA as an architectural support agent.

  12. Electrospinning of poly(vinyl alcohol) nanofibers loaded with hexadecane nanodroplets.

    Science.gov (United States)

    Arecchi, A; Mannino, S; Weiss, J

    2010-08-01

    The feasibility of producing poly(vinyl alcohol) (PVA) nanofibers containing fine-disperse hexadecane droplets by electrospinning a blend of hexadecane-in-water emulsions and PVA was investigated. Hexadecane oil-in-water nanoemulsions (d(10)= 181.2 +/- 0.1 nm) were mixed with PVA at pH 4.5 to yield polymer-emulsion blends containing 0.5 to 1.5 wt% oil droplets and 8-wt% PVA. The solution properties of emulsions and emulsion-PVA blends (viscosity, conductivity, surface tension) were determined. Solutions were electrospun and the morphology and thermal properties of deposited fiber mats characterized by scanning electron microscopy and differential scanning calorimetry. Fiber mats were dissolved in buffer to liberate incorporated hexadecane droplets and the buffer solutions analyzed by optical microscopy, UV-spectroscopy, and light scattering. Analysis of dry fiber mats and their solutions showed that emulsion droplets were indeed part of the electrospun fiber structures. Depending on the concentration of hexadecane in the initial emulsion-polymer blends, droplets were dispersed in the fibers as individual droplets or in form of aggregated flocs of hexadecane droplets. Nanofibers with spindle-like perturbations or nanofibers containing bead-like structures with approximately 5 times larger than the size of droplets in the original nanoemulsion were obtained. Remarkably, incorporation of hexadecane droplets in fibers did not alter size of individual droplets, that is, no coalescence occurred. The manufacture of solid matrix containing nanodroplets could be of substantial interest for manufacturers wishing to develop encapsulation system for lipophilic functional compounds such as lipid-soluble flavors, antimicrobials, antioxidants, and bioactives with tailored release kinetics. Practical Applications: The paper describes the formation of electrospun nanofibers from hydrophilic polymers that contain fine-disperse emulsion droplets. By incorporating emulsion droplets, a

  13. Bioactive behaviour of sol-gel derived antibacterial bioactive glass

    Energy Technology Data Exchange (ETDEWEB)

    Bellantone, M.; Hench, L.L. [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials

    2001-07-01

    A new four-component bioactive glass containing Ag{sub 2}O was produced via the sol-gel process. This system releases Ag{sup +} which is a powerful antibacterial agent. The work reported herein is a comparative study of the bioactivity levels of conventional bioactive glass and of the new antibacterial glass. On the basis of XRD patterns, FTIR spectra, and ICP data, the bioactive behaviour of the two biomaterials is nearly equivalent. (orig.)

  14. Optimization of blend parameters for the fabrication of polycaprolactone-silicon based ormoglass nanofibers by electrospinning.

    Science.gov (United States)

    Sachot, Nadège; Castano, Oscar; Planell, Josep A; Engel, Elisabeth

    2015-08-01

    Electrospinning is a method that can be used to efficiently produce scaffolds that mimic the fibrous structure of natural tissue, such as muscle structures or the extracellular matrix of bone. The technique is often used as a way of depositing composites (organic/inorganic materials) to obtain bioactive nanofibers which have the requisite mechanical properties for use in tissue engineering. However, many factors can influence the formation and collection of fibers, including experimental variables such as the parameters of the solution of the electrospun slurry. In this study, we assessed the influence of the polymer concentration, glass content and glass hydrolysis level on the morphology and thickness of fibers produced by electrospinning for a PCL-(Si-Ca-P2 ) bioactive ormoglass-organically modified glass-blend. Based on previous assays, this combination of materials shows good angiogenic and osteogenic properties, which gives it great potential for use in tissue engineering. The results of our study showed that blend preparation directly affected the features of the resulting fibers, and when the parameters of the blend are precisely controlled, fibers with a regular diameter could be produced fairly easily when 2,2,2-trifluoroethanol was used as a solvent instead of tetrahydrofuran. The diameter of the homogeneous fibers ranged from 360 to 620 nm depending on the experimental conditions used. This demonstrates that experimental optimization of the electrospinning process is crucial in order to obtain a deposit of hybrid nanofibers with a regular shape.

  15. Evaluation of the genotoxicity of cellulose nanofibers

    Directory of Open Access Journals (Sweden)

    de Lima R

    2012-07-01

    Full Text Available Renata de Lima,1 Leandro Oliveira Feitosa,1 Cintia Rodrigues Maruyama,1 Mariana Abreu Barga,1 Patrícia Cristina Yamawaki,1 Isolda Jesus Vieira,1 Eliangela M Teixeira,2 Ana Carolina Corrêa,2 Luiz Henrique Caparelli Mattoso,2 Leonardo Fernandes Fraceto31Department of Biotechnology, University of Sorocaba, Sorocaba, 2Embrapa Instrumentation (CNPDIA, National Nanotechnology Laboratory for Agriculture (LNNA, São Carlos, 3Department of Environmental Engineering, State University of São Paulo (UNESP, Sorocaba, SP, BrazilBackground: Agricultural products and by products provide the primary materials for a variety of technological applications in diverse industrial sectors. Agro-industrial wastes, such as cotton and curaua fibers, are used to prepare nanofibers for use in thermoplastic films, where they are combined with polymeric matrices, and in biomedical applications such as tissue engineering, amongst other applications. The development of products containing nanofibers offers a promising alternative for the use of agricultural products, adding value to the chains of production. However, the emergence of new nanotechnological products demands that their risks to human health and the environment be evaluated. This has resulted in the creation of the new area of nanotoxicology, which addresses the toxicological aspects of these materials.Purpose and methods: Contributing to these developments, the present work involved a genotoxicological study of different nanofibers, employing chromosomal aberration and comet assays, as well as cytogenetic and molecular analyses, to obtain preliminary information concerning nanofiber safety. The methodology consisted of exposure of Allium cepa roots, and animal cell cultures (lymphocytes and fibroblasts, to different types of nanofibers. Negative controls, without nanofibers present in the medium, were used for comparison.Results: The nanofibers induced different responses according to the cell type used. In

  16. Synthesis and Characterization of Boehmite Nanofibers

    Directory of Open Access Journals (Sweden)

    Jing Yang

    2008-01-01

    Full Text Available Boehmite nanofibers of high quality were synthesized through a wet-gel conversion process without the use of a surfactant. The long nanofibers of boehmite with clear-cut edges were obtained by steaming the wet-gel precipitate at 170∘C for 2 days. Analytical techniques such as X-ray diffraction (XRD, scanning electron microscopy (SEM, infrared emission spectroscopy (IES, as well as Raman spectroscopy were used to characterize the products.

  17. Fabrication of Conductive Polypyrrole Nanofibers by Electrospinning

    Directory of Open Access Journals (Sweden)

    Yiqun Cong

    2013-01-01

    Full Text Available Electrospinning is employed to prepare conductive polypyrrole nanofibers with uniform morphology and good mechanical strength. Soluble PPy was synthesized with NaDEHS as dopant and then applied to electrospinning with or without PEO as carrier. The PEO contents had great influence on the morphology and conductivity of the electrospun material. The results of these experiments will allow us to have a better understanding of PPy electrospun nanofibers and will permit the design of effective electrodes in the BMIs fields.

  18. PLGA nanofibers blended with designer self-assembling peptides for peripheral neural regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Nune, Manasa; Krishnan, Uma Maheswari; Sethuraman, Swaminathan, E-mail: swami@sastra.edu

    2016-05-01

    Electrospun nanofibers are attractive candidates for neural regeneration due to similarity to the extracellular matrix. Several synthetic polymers have been used but they lack in providing the essential biorecognition motifs on their surfaces. Self-assembling peptide nanofiber scaffolds (SAPNFs) like RADA16 and recently, designer SAPs with functional motifs RADA16-I-BMHP1 areexamples, which showed successful spinal cord regeneration. But these peptide nanofiber scaffolds have poor mechanical properties and faster degradation rates that limit their use for larger nerve defects. Hence, we have developed a novel hybrid nanofiber scaffold of polymer poly(L-lactide-co-glycolide) (PLGA) and RADA16-I-BMHP1. The scaffolds were characterized for the presence of peptides both qualitatively and quantitatively using several techniques like SEM, EDX, FTIR, CHN analysis, Circular Dichroism analysis, Confocal and thermal analysis. Peptide self-assembly was retained post-electrospinning and formed rod-like nanostructures on PLGA nanofibers. In vitro cell compatibility was studied using rat Schwann cells and their adhesion, proliferation and gene expression levels on the designed scaffolds were evaluated. Our results have revealed the significant effects of the peptide blended scaffolds on promoting Schwann cell adhesion, extension and phenotypic expression. Neural development markers (SEM3F, NRP2 & PLX1) gene expression levels were significantly upregulated in peptide blended scaffolds compared to the PLGA scaffolds. Thus the hybrid blended novel designer scaffolds seem to be promising candidates for successful and functional regeneration of the peripheral nerve. - Highlights: • A novel blended scaffold of polymer PLGA and designer self-assembling peptide RADA16-I-BMPH1 was designed • The peptide retained the self-assembling features and formed rod like nanostructures on top of PLGA nanofibers • PLGA-peptide scaffolds have promoted the Schwann cell bipolar extension and

  19. Fabrication of Poly(4-vinylpyridine) Nanofiber and Fluorescent Poly(4-vinylpyridine)/Porphyrin Nanofiber by Electrospinning

    Institute of Scientific and Technical Information of China (English)

    SONG Yan; ZHAN Nai-qian; YU Miao; YANG Qing-biao; ZHANG Chao-qun; WANG Heng-guo; LI Yao-xian

    2008-01-01

    Poly(4-vinylpyridine)(P4-VP) nanofiber and fluoresent poly(4-vinylpyridine)/porphyrin(P4-VP/TPPA) nanofiber were respectively prepared by electrospinning.The effect of the concentration of P4-VP/dimethylformamide (DMF) electrospinning solutions on the morphology of P4-VP nanofiber was investigated and it was found that the average diameter of the nanofiber of P4-VP/DMF increased with the increase of the concentration of the spinning solution.After the addition of TPPA to the P4-VP/DMF spinning solution,the diameter of P4-VP/TPPA nanofiber became even due to the increase of the conductivity of the P4-VP/DMF-TPPA solution.The photoluminescent(PL) spectral analysis indicates that the emission peak position of P4-VP/TPPA nanofiber is almost the same as that of pure TPPA at about 650 nm without peak shift,and when it was stored for 20 days,the emission peak of P4-VP/TPPA nanofiber is also at 650 rim,indicating that the fuorescent property of P4-VP/TPPA nanofiber is stable.Fourier-transform infrared(FTIR) spectrum confirms the chemical composition of the resulting P4-VP/TPPA composite nanoflber.

  20. Hydrodynamic Helical Orientations of Nanofibers in a Vortex

    Directory of Open Access Journals (Sweden)

    Akihiko Tsuda

    2014-05-01

    Full Text Available In this review article, I report our recent studies on spectroscopic visualizations of macroscopic helical alignments of nanofibers in vortex flows. Our designed supramolecular nanofibers, formed through self-assemblies of dye molecules, helically align in torsional flows of a vortex generated by mechanical rotary stirring of the sample solutions. The nanofiber, formed through bundling of linear supramolecular polymers, aligns equally in right- and left-handed vortex flows. However, in contrast, a one-handedly twisted nanofiber, formed through helical bundling of the supramolecular polymers, shows unequal helical alignments in these torsional flows. When the helical handedness of the nanofiber matches that of the vortex flow, the nanofiber aligns more efficiently in the flowing fluid. Such phenomena are observed not only with the artificial helical supramolecular nanofibers but also with biological nanofibers such as double-stranded DNA.

  1. Bubbfil spinning for mass-production of nanofibers

    Directory of Open Access Journals (Sweden)

    Chen Rou-Xi

    2014-01-01

    Full Text Available Bubbfil spinning is a generalized bubble electrospinning, including bubble spinning, blown-bubble spinning, and membrane spinning, for mass production of nanofiber. This paper shows small bubbles in liquid membrane are the best candidate for uniform nanofibers.

  2. Effect of Nanofibers on Spore Penetration and Lunar Dust Filtration

    OpenAIRE

    Phil Gibson, Ph.D.; Heidi Schreuder-Gibson, Ph.D.; Robert Stote; Margaret Roylance, Ph.D.; Cathy Capone; Masami Nakagawa, Ph.D.

    2008-01-01

    The results of two separate studies on biological spore penetration and simulated lunar dust filtration illustrate the use of nanofibers in some nonstandard filtration applications (nanofibers are generally defined as having diameters of less than a micron). In the first study, a variety of microporous liners containing microfibers and nanofibers were combined with cotton-based fabrics in order to filter aerosolized spores. The aerosol penetration resistance of the nanofiber-lined fabrics was...

  3. Preparation and characterization of crosslinked chitosan-based nanofibers

    Institute of Scientific and Technical Information of China (English)

    Ying Shan Zhou; Dong Zhi Yang; Jun Nie

    2007-01-01

    Crosslinked chitosan-based nanofibers were successfully prepared via electrospinning technique with heat mediated chemical crosslinking followed. The structure, morphology and mechanical property of nanofibers were characterized by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), Instron machine, respectively. The results showed that, nanofibers exhibited a smooth surface and regular morphology, and tensile strength of nanofibers improved with increasing of triethylene glycol dimethacrylate (TEGDMA) content.

  4. Porous bioactive materials

    Science.gov (United States)

    Zhang, Kai

    Bioactive materials chemically bond to tissues through the development of biologically active apatite. Porous structures in biomaterials are designed to enhance bioactivity, grow artificial tissues and achieve better integration with host tissues in the body. The goal of this research is to design, fabricate and characterize novel porous bioactive materials. 3D ordered macroporous bioactive glasses (3DOM-BGs, pore size: 200--1000 nm) were prepared using a sol-gel process and colloidal crystal templates. 3DOM-BGs are more bioactive and degradable than mesoporous (pore size simulated body fluid (SBF). Apatite formation and 3DOM-BG degradation rates increased with the decrease of soaking ratio. Apatite induction time in SBF increased with 3DOM-BG calcination temperature (600--800°C). Apatite formation and 3DOMBG degradation were slightly enhanced for a phosphate containing composition. Large 3DOM-BG particles formed less apatite and degraded less completely as compared with small particles. An increase in macropore size slowed down 3DOM-BG degradation and apatite formation processes. After heating the converted apatite at a temperature higher than 700°C, highly crystalline hydroxyapatite and a minor tri-calcium phosphate phase formed. 3DOM-BGs have potential applications as bone/periodontal fillers, and drugs and biological factors delivery agents. Anchoring artificial soft tissues (e.g., cartilage) to native bone presents a challenge. Porous polymer/bioactive glass composites are candidate materials for engineering artificial soft tissue/bone interfaces. Porous composites consisting of polymer matrices (e.g., polysulfone, polylactide, and polyurethane) and bioactive glass particles were prepared by polymer phase separation techniques adapted to include ceramic particles. Composites (thickness: 200--500 mum) have asymmetric structures with dense top layers and porous structures beneath. Porous structures consist of large pores (>100 mum) in a network of smaller (<10

  5. Self-assembled nanofiber coatings for controlling cell responses

    NARCIS (Netherlands)

    Barros, Raquel C.; Gelens, Edith; Bulten, Erna; Tuin, Annemarie; de Jong, Menno R; Kuijer, Roel; van Kooten, Theo G

    Nanofibers are thought to enhance cell adhesion, growth, and function. We demonstrate that the choice of building blocks in self-assembling nanofiber systems can be used to control cell behavior. The use of 2 D-coated, self-assembled nanofibers in controlling lens epithelial cells, fibroblasts, and

  6. Fabrication of WS2 nanofibers from WO3 nanofibers prepared by an electrospinning method.

    Science.gov (United States)

    Zhu, Yajun; Zhang, Xuebin; Ji, Yi; Feng, Yi; Zhang, Jingcheng

    2013-03-01

    This paper describes a procedure of synthesizing long WS2 nanofibers. WO3 nanofibers were prepared as precursors by electrospinning of ammonium meta-tungstate (AMT), polyvinyl alcohol (PVA) and alcohol solution followed by calcination at 550 degrees C in air. WS2 nanofibers were obtained by sulfurization of the WO3 nanofibres at 800 degrees C in an argon atmosphere, with sulfur powder acting as sulfuration reducer. The nanofibres were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and transmission electron microscopy (TEM). The results show that the final products are pure WS2 nanofibres, which have high aspect ratio. The WS2 nanofibers with rough surface were formed of nanoparticles, while some nanoflakes appeared on the surface of WS2 nanofibres. The diameters of the WS2 nanofibers were between 200 and 300 nm, which is similar to WO3 nanofibers. In addition, the WS2 nanofibers were polycrystalline.

  7. Surface structure enhanced second harmonic generation in organic nanofibers

    DEFF Research Database (Denmark)

    Fiutowski, Jacek; Maibohm, Christian; Kostiucenko, Oksana;

    Second-harmonic generation upon femto-second laser irradiation of nonlinearly optically active nanofibers grown from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules is investigated. Following growth on mica templates, the nanofibers have been transferred onto lithography-d......-defined regular arrays of gold square nanostructures. These nanostructure arrays induce local field enhancement, which significantly lowers the threshold for second harmonic generation in the nanofibers.......Second-harmonic generation upon femto-second laser irradiation of nonlinearly optically active nanofibers grown from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules is investigated. Following growth on mica templates, the nanofibers have been transferred onto lithography...

  8. Novel continuous carbon and ceramic nanofibers and nanocomposites

    Science.gov (United States)

    Wen, Yongkui

    2004-12-01

    Manufacturing of carbon nanofibers from PAN precursor is described in Chapter 2 of the dissertation. The electrospun nanofibers were continuous, uniform in diameter, and the samples didn't contain impurities, unlike carbon nanotubes or vapor grown carbon fibers. Systematic studies on the electrospinning parameters showed that nanofiber diameter could be varied in a range of 80 to 1800 nm. XRD studies on the carbon nanofibers fired at different temperatures showed that higher temperature resulted in better nanostructure. Fracture-free random carbon nanofiber sheets were produced by stretch-stabilization and carbonization for the first time. Toughening effects of random as-spun PAN, stabilized PAN, and carbon nanofibers on Mode I and Mode II interlaminar fracture of advanced carbon-epoxy composites were examined by DCB and ENF tests respectively in Chapter 3. The results showed that the interlaminar fracture toughness increased the most with carbon nanofiber reinforcement. 200% improvement in Mode I fracture toughness and 60% in Mode II fracture toughness were achieved with a minimum increase of weight. SEM fractographic analysis showed nanofiber pullout and crack bridging as the main nanomechanisms of toughening. Chapter 4 describes manufacturing of aligned carbon nanofibers and nanocomposites by a modified electrospinning technique. Constant-load stretch-stabilization was applied on carbon nanofibers for the first time. Analysis showed that mechanical properties of nanofibers and nanocomposites improved with stretch-stabilization and alignment of carbon nanofibers. Nanofabrication of ceramic 3Al2O3-2SiO2, SiO2-TiO2 nanofibers by a novel combination of sol-gel and electrospinning techniques invented recently at UNL is described in Chapters 5. The 3Al2O3-2SiO2, SiO2-TiO 2 nanofibers were continuous, non circular in cross section and had crystalline structure after high temperature calcination. Effects of the process parameters on their geometry and structure were

  9. Advancement in organic nanofiber based transistors

    DEFF Research Database (Denmark)

    Jensen, Per Baunegaard With; Kjelstrup-Hansen, Jakob; Tavares, Luciana

    The focus of this project is to study the light emission from nanofiber based organic light-emitting transistors (OLETs) with the overall aim of developing efficient, nanoscale light sources with different colors integrated on-chip. The research performed here regards the fabrication and characte......The focus of this project is to study the light emission from nanofiber based organic light-emitting transistors (OLETs) with the overall aim of developing efficient, nanoscale light sources with different colors integrated on-chip. The research performed here regards the fabrication...... and characterization of OLETs using the organic semiconductors para-hexaphenylene (p6P), 5,5´-Di-4-biphenyl-2,2´-bithiophene (PPTTPP) and 5,5'-bis(naphth-2-yl)-2,2'-bithiophene (NaT2). These molecules can self-assemble forming molecular crystalline nanofibers. Organic nanofibers can form the basis for light......-emitters for future nanophotonic applications, due to their many interesting optoelectronic properties, such as polarized photo- and electroluminescence, waveguiding and emission color tunability. A simple roll printing technique1 has allowed us to implement these nanofibers in different types of devices. Multicolor...

  10. Applied bioactive polymeric materials

    CERN Document Server

    Carraher, Charles; Foster, Van

    1988-01-01

    The biological and biomedical applications of polymeric materials have increased greatly in the past few years. This book will detail some, but not all, of these recent developments. There would not be enough space in this book to cover, even lightly, all of the major advances that have occurred. Some earlier books and summaries are available by two of this book's Editors (Gebelein & Carraher) and these should be consul ted for additional information. The books are: "Bioactive Polymeric Systems" (Plenum, 1985); "Polymeric Materials In Medication" (Plenum, 1985); "Biological Acti vi ties of Polymers" (American Chemical Society, 1982). Of these three, "Bioacti ve Polymeric Systems" should be the most useful to a person who is new to this field because it only contains review articles written at an introductory level. The present book primarily consists of recent research results and applications, with only a few review or summary articles. Bioactive polymeric materials have existed from the creation of life...

  11. Bioactivities of chicken essence.

    Science.gov (United States)

    Li, Y F; He, R R; Tsoi, B; Kurihara, H

    2012-04-01

    The special flavor and health effects of chicken essence are being widely accepted by people. Scientific researches are revealing its truth as a tonic food in traditional health preservation. Chicken essence has been found to possess many bioactivities including relief of stress and fatigue, amelioration of anxiety, promotion of metabolisms and post-partum lactation, improvement on hyperglycemia and hypertension, enhancement of immune, and so on. These activities of chicken essence are suggested to be related with its active components, including proteins, dipeptides (such as carnosine and anserine), polypeptides, minerals, trace elements, and multiple amino acids, and so on. Underlying mechanisms responsible for the bioactivities of chicken essence are mainly related with anti-stress, anti-oxidant, and neural regulation effects. However, the mechanisms are complicated and may be mediated via the combined actions of many active components, more than the action of 1 or 2 components alone. © 2012 Institute of Food Technologists®

  12. Bioactive phytochemicals in flaxseed

    OpenAIRE

    Johnsson, Pernilla

    2009-01-01

    Flaxseed (Linum usitatissimum L.) is rich in health-promoting bioactive compounds. Among plant foods, flaxseed has the highest content of lignans, mainly in the form of secoisolariciresinol diglucoside (SDG). Flaxseed oil also has a very high concentration of the essential omega-3 fatty acid alpha-linolenic acid (ALA). This thesis presents studies on both SDG and ALA. An HPLC method for quantification of SDG in hydrolysed flaxseed extracts was developed and used to compare the SDG content in ...

  13. Self-assembling peptide nanofiber scaffolds accelerate wound healing.

    Directory of Open Access Journals (Sweden)

    Aurore Schneider

    Full Text Available Cutaneous wound repair regenerates skin integrity, but a chronic failure to heal results in compromised tissue function and increased morbidity. To address this, we have used an integrated approach, using nanobiotechnology to augment the rate of wound reepithelialization by combining self-assembling peptide (SAP nanofiber scaffold and Epidermal Growth Factor (EGF. This SAP bioscaffold was tested in a bioengineered Human Skin Equivalent (HSE tissue model that enabled wound reepithelialization to be monitored in a tissue that recapitulates molecular and cellular mechanisms of repair known to occur in human skin. We found that SAP underwent molecular self-assembly to form unique 3D structures that stably covered the surface of the wound, suggesting that this scaffold may serve as a viable wound dressing. We measured the rates of release of EGF from the SAP scaffold and determined that EGF was only released when the scaffold was in direct contact with the HSE. By measuring the length of the epithelial tongue during wound reepithelialization, we found that SAP scaffolds containing EGF accelerated the rate of wound coverage by 5 fold when compared to controls without scaffolds and by 3.5 fold when compared to the scaffold without EGF. In conclusion, our experiments demonstrated that biomaterials composed of a biofunctionalized peptidic scaffold have many properties that are well-suited for the treatment of cutaneous wounds including wound coverage, functionalization with bioactive molecules, localized growth factor release and activation of wound repair.

  14. Graphene oxide decorated electrospun gelatin nanofibers: Fabrication, properties and applications.

    Science.gov (United States)

    Jalaja, K; Sreehari, V S; Kumar, P R Anil; Nirmala, R James

    2016-07-01

    Gelatin nanofiber fabricated by electrospinning process is found to mimic the complex structural and functional properties of natural extracellular matrix for tissue regeneration. In order to improve the physico-chemical and biological properties of the nanofibers, graphene oxide is incorporated in the gelatin to form graphene oxide decorated gelatin nanofibers. The current research effort is focussed on the fabrication and evaluation of physico-chemical and biological properties of graphene oxide-gelatin composite nanofibers. The presence of graphene oxide in the nanofibers was established by transmission electron microscopy (TEM). We report the effect of incorporation of graphene oxide on the mechanical, thermal and biological performance of the gelatin nanofibers. The tensile strength of gelatin nanofibers was increased from 8.29±0.53MPa to 21±2.03MPa after the incorporation of GO. In order to improve the water resistance of nanofibers, natural based cross-linking agent, namely, dextran aldehyde was employed. The cross-linked composite nanofibers showed further increase in the tensile strength up to 56.4±2.03MPa. Graphene oxide incorporated gelatin nanofibers are evaluated for bacterial activity against gram positive (Staphylococcus aureus) and gram negative (Escherichia coli) bacteria and cyto compatibility using mouse fibroblast cells (L-929 cells). The results indicate that the graphene oxide incorporated gelatin nanofibers do not prevent bacterial growth, nevertheless support the L-929 cell adhesion and proliferation.

  15. Bioactive glass in tissue engineering

    Science.gov (United States)

    Rahaman, Mohamed N.; Day, Delbert E.; Bal, B. Sonny; Fu, Qiang; Jung, Steven B.; Bonewald, Lynda F.; Tomsia, Antoni P.

    2011-01-01

    This review focuses on recent advances in the development and use of bioactive glass for tissue engineering applications. Despite its inherent brittleness, bioactive glass has several appealing characteristics as a scaffold material for bone tissue engineering. New bioactive glasses based on borate and borosilicate compositions have shown the ability to enhance new bone formation when compared to silicate bioactive glass. Borate-based bioactive glasses also have controllable degradation rates, so the degradation of the bioactive glass implant can be more closely matched to the rate of new bone formation. Bioactive glasses can be doped with trace quantities of elements such as Cu, Zn and Sr, which are known to be beneficial for healthy bone growth. In addition to the new bioactive glasses, recent advances in biomaterials processing have resulted in the creation of scaffold architectures with a range of mechanical properties suitable for the substitution of loaded as well as non-loaded bone. While bioactive glass has been extensively investigated for bone repair, there has been relatively little research on the application of bioactive glass to the repair of soft tissues. However, recent work has shown the ability of bioactive glass to promote angiogenesis, which is critical to numerous applications in tissue regeneration, such as neovascularization for bone regeneration and the healing of soft tissue wounds. Bioactive glass has also been shown to enhance neocartilage formation during in vitro culture of chondrocyte-seeded hydrogels, and to serve as a subchondral substrate for tissue-engineered osteochondral constructs. Methods used to manipulate the structure and performance of bioactive glass in these tissue engineering applications are analyzed. PMID:21421084

  16. Fabrication of nanofiber mats from electrospinning of functionalized polymers

    Science.gov (United States)

    Oktay, Burcu; Kayaman-Apohan, Nilhan; Erdem-Kuruca, Serap

    2014-08-01

    Electrospinning technique enabled us to prepare nanofibers from synthetic and natural polymers. In this study, it was aimed to fabricate electrospun poly(vinyl alcohol) (PVA) based nanofibers by reactive electrospinning process. To improve endurance of fiber toward to many solvents, PVA was functionalized with photo-crosslinkable groups before spinning. Afterward PVA was crosslinked by UV radiation during electrospinning process. The nanofiber mats were characterized by scanning electron microscopy (SEM). The results showed that homogenous, uniform and crosslinked PVA nanofibers in diameters of about 200 nm were obtained. Thermal stability of the nanofiber mat was investigated with thermal gravimetric analysis (TGA). Also the potential use of this nanofiber mats for tissue engineering was examined. Osteosarcoma (Saos) cells were cultured on the nanofiber mats.

  17. Transparent Conductive Nanofiber Paper for Foldable Solar Cells.

    Science.gov (United States)

    Nogi, Masaya; Karakawa, Makoto; Komoda, Natsuki; Yagyu, Hitomi; Nge, Thi Thi

    2015-11-26

    Optically transparent nanofiber paper containing silver nanowires showed high electrical conductivity and maintained the high transparency, and low weight of the original transparent nanofiber paper. We demonstrated some procedures of optically transparent and electrically conductive cellulose nanofiber paper for lightweight and portable electronic devices. The nanofiber paper enhanced high conductivity without any post treatments such as heating or mechanical pressing, when cellulose nanofiber dispersions were dropped on a silver nanowire thin layer. The transparent conductive nanofiber paper showed high electrical durability in repeated folding tests, due to dual advantages of the hydrophilic affinity between cellulose and silver nanowires, and the entanglement between cellulose nanofibers and silver nanowires. Their optical transparency and electrical conductivity were as high as those of ITO glass. Therefore, using this conductive transparent paper, organic solar cells were produced that achieved a power conversion of 3.2%, which was as high as that of ITO-based solar cells.

  18. Nano-Fiber Reinforced Enhancements in Composite Polymer Matrices

    Science.gov (United States)

    Chamis, Christos C.

    2009-01-01

    Nano-fibers are used to reinforce polymer matrices to enhance the matrix dependent properties that are subsequently used in conventional structural composites. A quasi isotropic configuration is used in arranging like nano-fibers through the thickness to ascertain equiaxial enhanced matrix behavior. The nano-fiber volume ratios are used to obtain the enhanced matrix strength properties for 0.01,0.03, and 0.05 nano-fiber volume rates. These enhanced nano-fiber matrices are used with conventional fiber volume ratios of 0.3 and 0.5 to obtain the composite properties. Results show that nano-fiber enhanced matrices of higher than 0.3 nano-fiber volume ratio are degrading the composite properties.

  19. Electrospinning nanofibers for controlled drug release

    Science.gov (United States)

    Banik, Indrani

    Electrospinning is the most widely studied technique for the synthesis of nanofibers. Electrospinning is considered as one of the technologies that can produce nanosized drugs incorporated in polymeric nanofibers. In vitro and in vivo studies have demonstrated that the release rates of drugs from these nanofiber formulations are enhanced compared to those from original drug substance. This technology has the potential for enhancing the oral delivery of poorly soluble drugs. The electrospun mats were made using Polycaprolactone/PCL, Poly(DL-lactide)/PDL 05 and Poly(DL-lactide-co-glycolide)/PLGA. The drugs incorporated in the electrospun fibers were 5-Fluorouracil and Rapamycin. The evidence of the drugs being embedded in the polymers was obtained by scanning electron microscopy (SEM), Raman and infrared spectroscopy. The release of 5-Fluorouracil and Rapamycin were followed by UV-VIS spectroscopy.

  20. High nonlinear optical anisotropy of urea nanofibers

    Science.gov (United States)

    Isakov, D.; de Matos Gomes, E.; Belsley, M.; Almeida, B.; Martins, A.; Neves, N.; Reis, R.

    2010-07-01

    Nanofibers consisting of the optically nonlinear organic molecule urea embedded in both poly(ethylene oxide) (PEO) and poly(vinyl alcohol) (PVA) polymers were produced by the electrospinning technique. The second-harmonic generation produced by aligned fiber mats of these materials displays a strong dependence on the polarization of the incident light. In PVA-urea nanofibers the effectiveness in generating of the second-harmonic light is as high as that of a pure urea powder with an average grain size of 110 μm. The results suggest that single crystalline urea nanofibers were achieved with a long-range crystalline order extending into the range of 2-4 μm with PVA as the host polymer.

  1. Purification process for vertically aligned carbon nanofibers

    Science.gov (United States)

    Nguyen, Cattien V.; Delziet, Lance; Matthews, Kristopher; Chen, Bin; Meyyappan, M.

    2003-01-01

    Individual, free-standing, vertically aligned multiwall carbon nanotubes or nanofibers are ideal for sensor and electrode applications. Our plasma-enhanced chemical vapor deposition techniques for producing free-standing and vertically aligned carbon nanofibers use catalyst particles at the tip of the fiber. Here we present a simple purification process for the removal of iron catalyst particles at the tip of vertically aligned carbon nanofibers derived by plasma-enhanced chemical vapor deposition. The first step involves thermal oxidation in air, at temperatures of 200-400 degrees C, resulting in the physical swelling of the iron particles from the formation of iron oxide. Subsequently, the complete removal of the iron oxide particles is achieved with diluted acid (12% HCl). The purification process appears to be very efficient at removing all of the iron catalyst particles. Electron microscopy images and Raman spectroscopy data indicate that the purification process does not damage the graphitic structure of the nanotubes.

  2. Graphene oxide decorated electrospun gelatin nanofibers: Fabrication, properties and applications

    Energy Technology Data Exchange (ETDEWEB)

    Jalaja, K. [Department of Chemistry, Indian Institute of Space Science and Technology, Valiamala, Thiruvananthapuram, Kerala 695 547 (India); Sreehari, V.S. [Indian Institute of Science Education and Research Bhopal, Bhauri, Madhya Pradesh 462066 (India); Kumar, P.R. Anil [Tissue culture laboratory, Biomedical Technology Wing, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Poojappura, Thiruvananthapuram, Kerala 695 012 (India); Nirmala, R. James, E-mail: nirmala@iist.ac.in [Department of Chemistry, Indian Institute of Space Science and Technology, Valiamala, Thiruvananthapuram, Kerala 695 547 (India)

    2016-07-01

    Gelatin nanofiber fabricated by electrospinning process is found to mimic the complex structural and functional properties of natural extracellular matrix for tissue regeneration. In order to improve the physico-chemical and biological properties of the nanofibers, graphene oxide is incorporated in the gelatin to form graphene oxide decorated gelatin nanofibers. The current research effort is focussed on the fabrication and evaluation of physico-chemical and biological properties of graphene oxide-gelatin composite nanofibers. The presence of graphene oxide in the nanofibers was established by transmission electron microscopy (TEM). We report the effect of incorporation of graphene oxide on the mechanical, thermal and biological performance of the gelatin nanofibers. The tensile strength of gelatin nanofibers was increased from 8.29 ± 0.53 MPa to 21 ± 2.03 MPa after the incorporation of GO. In order to improve the water resistance of nanofibers, natural based cross-linking agent, namely, dextran aldehyde was employed. The cross-linked composite nanofibers showed further increase in the tensile strength up to 56.4 ± 2.03 MPa. Graphene oxide incorporated gelatin nanofibers are evaluated for bacterial activity against gram positive (Staphylococcus aureus) and gram negative (Escherichia coli) bacteria and cyto compatibility using mouse fibroblast cells (L-929 cells). The results indicate that the graphene oxide incorporated gelatin nanofibers do not prevent bacterial growth, nevertheless support the L-929 cell adhesion and proliferation. - Highlights: • Graphene oxide nano reinforced gelatin nanofibers are fabricated by electrospinning. • Graphene oxide (0.5%) loading resulted in increased tensile strength. • GO/gelatin nanofibers are cross-linked with dextran aldehyde. • Composite nanofibers favoured adhesion of L-929 cells. • GO/gelatin mats do not prevent bacterial growth.

  3. Modified Silica Nanofibers with Antibacterial Activity

    Directory of Open Access Journals (Sweden)

    Ivana Veverková

    2016-01-01

    Full Text Available This study is focused on development of functionalized inorganic-organic nanofibrous material with antibacterial activity for wound dressing applications. The nanofibers combining poly(vinyl alcohol and silica were produced by electrospinning from the sol and thermally stabilized. The PVA/silica nanofibers surface was functionalized by silver and copper nanoparticles to ensure antibacterial activity. It was proven that quantity of adsorbed silver and copper nanoparticles depends on process time of adsorption. According to antibacterial tests results, this novel nanofibrous material shows a big potential for wound dressing applications due to its significant antibacterial efficiency.

  4. Biofunctionalizing nanofibers with carbohydrate blood group antigens.

    Science.gov (United States)

    Barr, Katie; Kannan, Bhuvaneswari; Korchagina, Elena; Popova, Inna; Ryzhov, Ivan; Henry, Stephen; Bovin, Nicolai

    2016-11-01

    A rapid and simple method of biofunctionalising nylon, cellulose acetate, and polyvinyl butyral electrospun nanofibers with blood group glycans was achieved by preparing function-spacer-lipid constructs and simply contacting them to fibers with a piezo inkjet printer. A series of water dispersible amphipathic glycan-spacer constructs were synthesized representing a range ABO and related blood group antigens. After immediate contact of the amphipathic glycan-spacer constructs with nanofiber surfaces they self-assembled and were detectable by enzyme immunoassays with high sensitivity and specificity.

  5. Controlled Morphology of Porous Polyvinyl Butyral Nanofibers

    OpenAIRE

    2011-01-01

    A simple and effective method for the fabrication of porous nanofibers based on the solvent evaporation methods in one-step electrospinning process from the commercial polyvinyl butyral (PVB) is presented. The obtained nanofibers are prevalently amorphous with diameters ranging from 150 to 4350 nm and specific surface area of approximately 2–20 m2/g. Pore size with irregular shape of the porous PVB fibers ranged approximately from 50 to 200 nm. The effects of polymer solution concentration,...

  6. Hydrogen storage in graphite nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Park, C.; Tan, C.D.; Hidalgo, R.; Baker, R.T.K.; Rodriguez, N.M. [Northeastern Univ., Boston, MA (United States). Chemistry Dept.

    1998-08-01

    Graphite nanofibers (GNF) are a type of material that is produced by the decomposition of carbon containing gases over metal catalyst particles at temperatures around 600 C. These molecularly engineered structures consist of graphene sheets perfectly arranged in a parallel, perpendicular or at angle orientation with respect to the fiber axis. The most important feature of the material is that only edges are exposed. Such an arrangement imparts the material with unique properties for gas adsorption because the evenly separated layers constitute the most ordered set of nanopores that can accommodate an adsorbate in the most efficient manner. In addition, the non-rigid pore walls can also expand so as to accommodate hydrogen in a multilayer conformation. Of the many varieties of structures that can be produced the authors have discovered that when gram quantities of a selected number of GNF are exposed to hydrogen at pressures of {approximately} 2,000 psi, they are capable of adsorbing and storing up to 40 wt% of hydrogen. It is believed that a strong interaction is established between hydrogen and the delocalized p-electrons present in the graphite layers and therefore a new type of chemistry is occurring within these confined structures.

  7. Electrospinning of nanofibers from non-polymeric systems: polymer-free nanofibers from cyclodextrin derivatives.

    Science.gov (United States)

    Celebioglu, Asli; Uyar, Tamer

    2012-01-21

    High molecular weight polymers and high polymer concentrations are desirable for the electrospinning of nanofibers since polymer chain entanglements and overlapping are important for uniform fiber formation. Hence, the electrospinning of nanofibers from non-polymeric systems such as cyclodextrins (CDs) is quite a challenge since CDs are cyclic oligosaccharides. Nevertheless, in this study, we have successfully achieved the electrospinning of nanofibers from chemically modified CDs without using a carrier polymer matrix. Polymer-free nanofibers were electrospun from three different CD derivatives, hydroxypropyl-β-cyclodextrin (HPβCD), hydroxypropyl-γ-cyclodextrin (HPγCD) and methyl-β-cyclodextrin (MβCD) in three different solvent systems, water, dimethylformamide (DMF) and dimethylacetamide (DMAc). We observed that the electrospinning of these CDs is quite similar to polymeric systems in which the solvent type, the solution concentration and the solution conductivity are some of the key factors for obtaining uniform nanofibers. Dynamic light scattering (DLS) measurements indicated that the presence of considerable CD aggregates and the very high solution viscosity were playing a key role for attaining nanofibers from CD derivatives without the use of any polymeric carrier. The electrospinning of CD solutions containing urea yielded no fibers but only beads or splashes since urea caused a notable destruction of the self-associated CD aggregates in their concentrated solutions. The structural, thermal and mechanical characteristics of the CD nanofibers were also investigated. Although the CD derivatives are amorphous small molecules, interestingly, we observed that these electrospun CD nanofibers/nanowebs have shown some mechanical integrity by which they can be easily handled and folded as a free standing material.

  8. Electrospinning of nanofibers from non-polymeric systems: polymer-free nanofibers from cyclodextrin derivatives

    Science.gov (United States)

    Celebioglu, Asli; Uyar, Tamer

    2012-01-01

    High molecular weight polymers and high polymer concentrations are desirable for the electrospinning of nanofibers since polymer chain entanglements and overlapping are important for uniform fiber formation. Hence, the electrospinning of nanofibers from non-polymeric systems such as cyclodextrins (CDs) is quite a challenge since CDs are cyclic oligosaccharides. Nevertheless, in this study, we have successfully achieved the electrospinning of nanofibers from chemically modified CDs without using a carrier polymer matrix. Polymer-free nanofibers were electrospun from three different CD derivatives, hydroxypropyl-β-cyclodextrin (HPβCD), hydroxypropyl-γ-cyclodextrin (HPγCD) and methyl-β-cyclodextrin (MβCD) in three different solvent systems, water, dimethylformamide (DMF) and dimethylacetamide (DMAc). We observed that the electrospinning of these CDs is quite similar to polymeric systems in which the solvent type, the solution concentration and the solution conductivity are some of the key factors for obtaining uniform nanofibers. Dynamic light scattering (DLS) measurements indicated that the presence of considerable CD aggregates and the very high solution viscosity were playing a key role for attaining nanofibers from CD derivatives without the use of any polymeric carrier. The electrospinning of CD solutions containing urea yielded no fibers but only beads or splashes since urea caused a notable destruction of the self-associated CD aggregates in their concentrated solutions. The structural, thermal and mechanical characteristics of the CD nanofibers were also investigated. Although the CD derivatives are amorphous small molecules, interestingly, we observed that these electrospun CD nanofibers/nanowebs have shown some mechanical integrity by which they can be easily handled and folded as a free standing material.

  9. UV-responsive polyvinyl alcohol nanofibers prepared by electrospinning

    Energy Technology Data Exchange (ETDEWEB)

    Khatri, Zeeshan, E-mail: zeeshan.khatri@faculty.muet.edu.pk [Department of Textile Engineering, Mehran University of Engineering and Technology, Jamshoro 76062 (Pakistan); Nano Fusion Technology Research Lab, Division of Frontier Fibers, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, 3-15-1, Tokida, Ueda, Nagano 386-8567 (Japan); Ali, Shamshad [Department of Textile Engineering, Mehran University of Engineering and Technology, Jamshoro 76062 (Pakistan); Department of Organic and Nano Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Khatri, Imran [Department of Entomology, Sindh Agriculture University, Tandojam (Pakistan); Mayakrishnan, Gopiraman [Nano Fusion Technology Research Lab, Division of Frontier Fibers, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, 3-15-1, Tokida, Ueda, Nagano 386-8567 (Japan); Kim, Seong Hun [Department of Organic and Nano Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Kim, Ick-Soo, E-mail: kim@shinshu-u.ac.jp [Nano Fusion Technology Research Lab, Division of Frontier Fibers, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, 3-15-1, Tokida, Ueda, Nagano 386-8567 (Japan)

    2015-07-01

    Graphical abstract: - Highlights: • UV responsive PVA nanofibers were prepared via electrospinning. • Quick response codes were recorded multiple times on UV responsive nanofibers. • The rate of photo-coloration was found faster than the rate of photo-reversibility. - Abstract: We report UV-responsive polyvinyl alcohol (PVA) nanofibers for potential application for recording and erasing quick response (QR) codes. We incorporate 1′-3′-dihydro-8-methoxy-1′,3′,3′-trimethyl-6-nitrospiro [2H-1-benzopyran-2,2′-(2H)-indole] (indole) and,3-dihydro-1,3,3-trimethylspiro [2H-indole-2,3′-[3H] phenanthr [9,10-b] (1,4) oxazine] (oxazine) into PVA polymer matrix via electrospinning technique. The resultant nanofibers were measured for recording–erasing, photo-coloration and thermal reversibility. The rate of photo-coloration of PVA–indole nanofibers was five times higher than the PVA–oxazine nanofibers, whereas the thermal reversibility found to be more than twice as fast as PVA–oxazine nanofibers. Results showed that the resultant nanofibers have very good capability of recording QR codes multiple times. The FTIR spectroscopy and SEM were employed to characterize the electrospun nanofibers. The UV-responsive PVA nanofibers have great potentials as a light-driven nanomaterials incorporated within sensors, sensitive displays and in optical devices such as erasable and rewritable optical storage.

  10. Electrospinning of nickel oxide nanofibers: Process parameters and morphology control

    Energy Technology Data Exchange (ETDEWEB)

    Khalil, Abdullah, E-mail: akhalil@masdar.ac.ae; Hashaikeh, Raed, E-mail: rhashaikeh@masdar.ac.ae

    2014-09-15

    In the present work, nickel oxide nanofibers with varying morphology (diameter and roughness) were fabricated via electrospinning technique using a precursor composed of nickel acetate and polyvinyl alcohol. It was found that the diameter and surface roughness of individual nickel oxide nanofibers are strongly dependent upon nickel acetate concentration in the precursor. With increasing nickel acetate concentration, the diameter of nanofibers increased and the roughness decreased. An optimum concentration of nickel acetate in the precursor resulted in the formation of smooth and continuous nickel oxide nanofibers whose diameter can be further controlled via electrospinning voltage. Beyond an optimum concentration of nickel acetate, the resulting nanofibers were found to be ‘flattened’ and ‘wavy’ with occasional cracking across their length. Transmission electron microscopy analysis revealed that the obtained nanofibers are polycrystalline in nature. These nickel oxide nanofibers with varying morphology have potential applications in various engineering domains. - Highlights: • Nickel oxide nanofibers were synthesized via electrospinning. • Fiber diameter and roughness depend on nickel acetate concentration used. • With increasing nickel acetate concentration the roughness of nanofibers decreased. • XRD and TEM revealed a polycrystalline structure of the nanofibers.

  11. Hierarchical structure of nanofibers by bubbfil spinning

    Directory of Open Access Journals (Sweden)

    Liu Chang

    2015-01-01

    Full Text Available A polymer bubble is easy to be broken under a small external force, various different fragments are formed, which can be produced to different morphologies of products including nanofibers and plate-like strip. Polyvinyl-alcohol/honey solution is used in the experiment to show hierarchical structure by the bubbfil spinning.

  12. Carbon nanofiber growth on thin rhodium layers

    NARCIS (Netherlands)

    Chinthaginjala, J.K.; Unnikrishnan, S.; Smithers, M.A.; Kip, G.A.M.; Lefferts, L.

    2012-01-01

    A thinlayer of carbon nanofibers (CNFs) was synthesized on a thin polycrystalline rhodium (Rh) metal layer by decomposing ethylene in the presence of hydrogen. Interaction of Rh crystals with carbon results in fragmentation and formation of Rh-nanoparticles, facilitating CNF growth. CNFs are immobil

  13. Controlled Morphology of Porous Polyvinyl Butyral Nanofibers

    Directory of Open Access Journals (Sweden)

    Daniela Lubasova

    2011-01-01

    Full Text Available A simple and effective method for the fabrication of porous nanofibers based on the solvent evaporation methods in one-step electrospinning process from the commercial polyvinyl butyral (PVB is presented. The obtained nanofibers are prevalently amorphous with diameters ranging from 150 to 4350 nm and specific surface area of approximately 2–20 m2/g. Pore size with irregular shape of the porous PVB fibers ranged approximately from 50 to 200 nm. The effects of polymer solution concentration, composition of the solvents mixture, and applied voltage on fiber diameter and morphology were investigated. The theoretical approach for the choice of poor and good solvents for PVB was explained by the application Hansen solubility parameter (HSP and two-dimensional graph. Three basic conditions for the production of porous PVB nanofibers were defined: (i application of good/poor solvent mixture for spinning solution, (ii differences of the evaporation rate between good/poor solvent, and (iii correct ratios of good/poor solvent (v/v. The diameter of prepared porous PVB fibers decreased as the polymer concentration was lowered and with higher applied voltage. These nanofiber sheets with porous PVB fibers could be a good candidate for high-efficiency filter materials in comparison to smooth fibers without pores.

  14. Carbon nanofibers: catalytic synthesis and applications

    NARCIS (Netherlands)

    Jong, K.P. de; Geus, John W.

    2001-01-01

    Carbon nanofibers (diameter range, 3-100 nm; length range, 1.1-1000 µm) have been known for a long time as a nuisance that often merges during catalythic conversion of carbon-containing gases. The recent outburst of interest in these graphitic materials originates from their potential for unique app

  15. Fluorescent Self-Assembled Polyphenylene Dendrimer Nanofibers

    NARCIS (Netherlands)

    Liu, Daojun; Feyter, Steven De; Cotlet, Mircea; Wiesler, Uwe-Martin; Weil, Tanja; Herrmann, Andreas; Müllen, Klaus; Schryver, Frans C. De

    2003-01-01

    A second-generation polyphenylene dendrimer 1 self-assembles into nanofibers on various substrates such as HOPG, silicon, glass, and mica from different solvents. The investigation with noncontact atomic force microscopy (NCAFM) and scanning electron microscopy (SEM) shows that the morphology of the

  16. Bubbfil spinning for fabrication of PVA nanofibers

    Directory of Open Access Journals (Sweden)

    He Chun-Hui

    2015-01-01

    Full Text Available Bubbfil spinning is used to fabricate PVA nanofibers. Multiple polymer bubbles are formed on the spinneret, and an external force is added to burst the bubbles immediately. The ejected jets are accelerated to a high velocity, and fiber diameter is tenable by adjusting the spinning parameters.

  17. Cellulose acetate/hydroxyapatite/chitosan coatings for improved corrosion resistance and bioactivity

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Zhenyu; Qin, Jinli [Advanced Biomaterials and Tissue Engineering Center, Huazhong University of Science and Technology, Wuhan 430074 (China); Ma, Jun, E-mail: caltary@gmail.com [Advanced Biomaterials and Tissue Engineering Center, Huazhong University of Science and Technology, Wuhan 430074 (China); Department of Biomedical Engineering, School of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2015-04-01

    Cellulose acetate (CA) nanofibers were deposited on stainless steel plates by electrospinning technique. The composite of hydroxyapatite (HAP) nanoparticles and chitosan (CHI) was coated subsequently by dip-coating. The structure and morphology of the obtained coatings were investigated by Fourier transform infrared spectroscopy and scanning electron microscopy. The stability of the coatings in physiological environment was studied using electrochemical polarization and impedance spectroscopy. The CA nanofibers were embedded in the HAP/CHI coating and the resulted composite film was densely packed and uniform on the substrate. The in vitro biomineralization study of the coated samples immersed in simulated body fluid (SBF) confirmed the formation ability of bone-like apatite layer on the surface of HAP-containing coatings. Furthermore, the coatings could provide corrosion resistance to the stainless steel substrate in SBF. The electrochemical results suggested that the incorporation of CA nanofibers could improve the corrosion resistance of the HAP/CHI coating. Thus, biocompatible CA/HAP/CHI coated metallic implants could be very useful in the long-term stability of the biomedical applications. - Highlights: • The composite coatings were prepared by electrospinning and dip-coating. • Good in vitro bioactivity of the CA/HAP/CHI coating was confirmed. • Electrochemical behaviors in SBF of the coatings have been studied. • The CA/HAP/CHI coating shows better resistance property than HAP/CHI.

  18. Anti-fouling bioactive surfaces.

    Science.gov (United States)

    Yu, Qian; Zhang, Yanxia; Wang, Hongwei; Brash, John; Chen, Hong

    2011-04-01

    Bioactive surfaces refer to surfaces with immobilized bioactive molecules aimed specifically at promoting or supporting particular interactions. Such surfaces are of great importance for various biomedical and biomaterials applications. In the past few years, considerable effort has been made to create bioactive surfaces by forming specific biomolecule-modified surfaces on a non-biofouling "base" or "background". Hydrophilic and bioinert polymers have been widely used as anti-fouling layers that resist non-specific protein interactions. They can also serve as "spacers" to effectively move the immobilized biomolecule away from the surface, thus enhancing its bioactivity. In this review we summarize several successful approaches for the design and preparation of bioactive surfaces based on different types of anti-fouling/spacer materials. Some perspectives on future research in this area are also presented.

  19. Crystallization of Poly(3-hexylthiophene Nanofiber in a Narrow Groove

    Directory of Open Access Journals (Sweden)

    Satoshi Kushi

    2016-06-01

    Full Text Available Whisker-type poly(3-hexylthiophene-2,5-diyl (P3HT nanofibers were aligned by restricting their growth direction using an approximately 100–1000 nm wide narrow groove fabricated by thermal nanoimprinting. In grooves made of an amorphous fluoropolymer (CYTOP™ with widths of less than 1500 nm, the nanofibers oriented uniaxially perpendicular to the groove and their length was limited to the width of the groove. This result indicates that the nucleation of nanofibers tends to be selectively promoted near the interface of CYTOP™ with fluoro-groups, and nanofiber growth perpendicular to the wall is promoted because P3HT molecules are supplied more frequently from the center of the groove. Furthermore, the orientation induced anisotropic conductivity, and the conductivity parallel to the oriented nanofibers was more than an order of magnitude higher than that perpendicular to the oriented nanofibers.

  20. Preparation of photocrosslinkable polystyrene methylene cinnamate nanofibers via electrospinning.

    Science.gov (United States)

    Yi, Chuan; Nirmala, R; Navamathavan, R; Li, Xiang-Dan; Kim, Hak-Yong

    2011-10-01

    Nanoscaled photocrosslinkable polystyrene methylene cinnamate (PSMC) nanofibers were fabricated by electrospinning. The PSMC was prepared by the modification of polystyrene as a starting material via a two-step reaction process, chloromethylation and esterification. The chemical structure of PSMC was confirmed by 1H NMR and Fourier transform infrared spectroscopy (FT-IR). The photosensitivity of the PSMC was investigated using ultraviolet (UV) spectroscopic methods. Electrospun PSMC nanofiber mat showed excellent solubility in many organic solvents. UV irradiation of the electrospun mats led to photodimerization to resist dissolving in organic solvents. The morphology of the nanofiber was observed by scanning electron microscopy (SEM) and the result indicated that the average diameter of nanofibers is 350 nm and the crosslinked nanofibers were not collapsed after dipping into organic solvent showing good solvent-stability. This photocrosslinked nanofibers has the potential application in filtration, catalyst carrier and protective coating.

  1. Mechanical characterization of cellulose single nanofiber by atomic force microscopy

    Science.gov (United States)

    Zhai, Lindong; Kim, Jeong Woong; Lee, Jiyun; Kim, Jaehwan

    2017-04-01

    Cellulose fibers are strong natural fibers and they are renewable, biodegradable and the most abundant biopolymer in the world. So to develop new cellulose fibers based products, the mechanical properties of cellulose nanofibers would be a key. The atomic microscope is used to measure the mechanical properties of cellulose nanofibers based on 3-points bending of cellulose nanofiber. The cellulose nanofibers were generated for an aqueous counter collision system. The cellulose microfibers were nanosized under 200 MPa high pressure. The cellulose nanofiber suspension was diluted with DI water and sprayed on the silicon groove substrate. By performing a nanoscale 3-points bending test using the atomic force microscopy, a known force was applied on the center of the fiber. The elastic modulus of the single nanofiber is obtained by calculating the fiber deflection and several parameters. The elastic modulus values were obtained from different resources of cellulose such as hardwood, softwood and cotton.

  2. Transparent Conductive Films of Copper Nanofiber Network Fabricated by Electrospinning

    Directory of Open Access Journals (Sweden)

    Sungyeoul Kim

    2015-01-01

    Full Text Available Cu nanofiber networks can be a good alternative of the Ag nanowire of high electrical conductivity while having the advantage of low price. An electrospinning method was developed to fabricate copper nanofiber network for use as a transparent conductive film on glass substrate. The effects of liquid diluents for electrospinning processability were examined in relation to the subsequent Cu nanofiber formation processes. Electrospinning solutions of copper acetate/polyvinyl alcohol (PVA and copper nitrate trihydrate/polyvinyl butyral (PVB were investigated. The polymer mixing solutions influenced the subsequent annealing temperatures for removal of the polymers and reduction of the formed CuO nanofibers to Cu metal nanofibers. The morphology and structures of the formed nanofiber networks were examined by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and so forth. The mixture with PVB provided lower annealing temperatures suitable for application to flexible substrates.

  3. NiO Nanofibers as a Candidate for a Nanophotocathode

    Directory of Open Access Journals (Sweden)

    Thomas J. Macdonald

    2014-04-01

    Full Text Available p-type NiO nanofibers have been synthesized from a simple electrospinning and sintering procedure. For the first time, p-type nanofibers have been electrospun onto a conductive fluorine doped tin oxide (FTO surface. The properties of the NiO nanofibers have been directly compared to that of bulk NiO nanopowder. We have observed a p-type photocurrent for a NiO photocathode fabricated on an FTO substrate.

  4. Doubly curved nanofiber-reinforced optically transparent composites

    Science.gov (United States)

    Shams, Md. Iftekhar; Yano, Hiroyuki

    2015-11-01

    Doubly curved nanofiber-reinforced optically transparent composites with low thermal expansion of 15 ppm/k are prepared by hot pressing vacuum-filtered Pickering emulsions of hydrophobic acrylic resin monomer, hydrophilic chitin nanofibers and water. The coalescence of acrylic monomer droplets in the emulsion is prevented by the chitin nanofibers network. This transparent composite has 3D shape moldability, making it attractive for optical precision parts.

  5. Synthesis and electrochemical properties of polyaniline nanofibers by interfacial polymerization.

    Science.gov (United States)

    Manuel, James; Ahn, Jou-Hyeon; Kim, Dul-Sun; Ahn, Hyo-Jun; Kim, Ki-Won; Kim, Jae-Kwang; Jacobsson, Per

    2012-04-01

    Polyaniline nanofibers were prepared by interfacial polymerization with different organic solvents such as chloroform and carbon tetrachloride. Field emission scanning electron microscopy and transmission electron microscopy were used to study the morphological properties of polyaniline nanofibers. Chemical characterization was carried out using Fourier transform infrared spectroscopy, UV-Vis spectroscopy, and X-ray diffraction spectroscopy and surface area was measured using BET isotherm. Polyaniline nanofibers doped with lithium hexafluorophosphate were prepared and their electrochemical properties were evaluated.

  6. Fabrication and characterization of PVA/ODA-MMT-poly(MA-alt-1-octadecene)-g-graphene oxide e-spun nanofiber electrolytes and their response to bone cancer cells.

    Science.gov (United States)

    Rzayev, Zakir M O; Salimi, Kouroush; Bunyatova, Ulviya; Acar, Selim; Salamov, Bahtiyar; Turk, Mustafa

    2016-04-01

    This work presents a new approach to fabrication and characterization of novel polymer nanofiber electrolytes from intercalated PVA/ODA-MMT nanocomposite as a matrix polymer and encapsulated graphene oxide (GO) nanosheets with amphiphilic reactive copolymer as partner polymers using electrospinning method. The chemical and physical structures, surface morphology, thermal behaviors and electric conductivity of nanocomposites and nanofibers were investigated using analyses methods including FTIR, XRD, SEM, DSC-TGA and conductivity analysis. Significant improvements in nanofiber morphology and size distribution were observed when GO and reactive organoclay were incorporated as reinforcement fillers into various matrix/partner solution blends. The structural factors of matrix-partner polymer nanocomposite particles with higher zeta-potential play important roles in both chemical and physical interfacial interactions and phase separation processing and also lead to the formation of nanofibers with unique surface morphologies and good conductivities. The cytotoxic, necrotic and apoptotic effects of chosen nanofibers on osteocarcinoma cells were also investigated. These multifunctional, self-assembled, nanofibrous surfaces can serve as semi-conductive and bioactive platforms in various electrochemical and bio-engineering processes, as well as reactive matrices used for the immobilization of various biopolymer precursors.

  7. Antibacterial electrospun chitosan-polyethylene oxide nanocomposite mats containing bioactive silver nanoparticles.

    Science.gov (United States)

    Kohsari, Iraj; Shariatinia, Zahra; Pourmortazavi, Seied Mahdi

    2016-04-20

    The antimicrobial chitosan-polyethylene oxide (CS-PEO) nanofibrous mats were developed by electrospinning technique for wound dressing applications. Indeed, a green route was introduced for fabrication of antibacterial mats loaded with 0.25% and 0.50% (w/w) of bioactive silver nanoparticles (Ag NPs, ∼70nm diameter) reduced by Falcaria vulgaris herbal extract. The mats were characterized by FE-SEM, EDAX, elemental mapping, FT-IR, contact angle, TGA/DSC as well as tensile strength analysis. All of the nanofibers had an average ∼200nm diameter. Interestingly, both of the CS-PEO mats containing 0.25% and 0.50% bioactive F. vulgaris-Ag NPs revealed 100% bactericidal activities against both Staphylococcus aureus and Escherichia coli bacteria. The silver release from nanofiber mats was sharply increased within first eight hours for both CS-PEO mats including 0.25% and 0.50% F. vulgaris-Ag NPs but after that the Ag nanoparticles were released very slowly (almost constant). The improved hydrophilicity, higher tensile strength and much greater silver release for CS-PEO-0.50% F. vulgaris-Ag NPs relative to those of the CS-PEO 0.25% F. vulgaris-Ag NPs suggested that the former was superior for biomedical applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. PLGA nanofiber membranes loaded with epigallocatechin-3-O-gallate are beneficial to prevention of postsurgical adhesions

    Directory of Open Access Journals (Sweden)

    Shin YC

    2014-08-01

    Full Text Available Yong Cheol Shin,1,* Won Jun Yang,1,* Jong Ho Lee,1 Jin-Woo Oh,2 Tai Wan Kim,3 Jong-Chul Park,4 Suong-Hyu Hyon,5 Dong-Wook Han1 1Department of Cogno-Mechatronics Engineering, Pusan National University, Busan, Republic of Korea; 2Department of Nanomaterials Engineering, College of Nanoscience and Nanotechnology, Pusan National University, Busan, Republic of Korea; 3Department of Design, College of Arts, Pusan National University, Busan, Republic of Korea; 4Department of Medical Engineering, Yonsei University College of Medicine, Seoul, Republic of Korea; 5Center for Fiber and Textile Science, Kyoto Institute of Technology, Kyoto, Japan *These authors contributed equally to this work Abstract: This study concentrates on the development of biodegradable nanofiber membranes with controlled drug release to ensure reduced tissue adhesion and accelerated healing. Nanofibers of poly(lactic-co-glycolic acid (PLGA loaded with epigallocatechin-3-O-gallate (EGCG, the most bioactive polyphenolic compound in green tea, were electrospun. The physicochemical and biomechanical properties of EGCG-releasing PLGA (E-PLGA nanofiber membranes were characterized by atomic force microscopy, EGCG release and degradation profiles, and tensile testing. In vitro antioxidant activity and hemocompatibility were evaluated by measuring scavenged reactive oxygen species levels and activated partial thromboplastin time, respectively. In vivo antiadhesion efficacy was examined on the rat peritonea with a surgical incision. The average fiber diameter of E-PLGA membranes was approximately 300–500 nm, which was almost similar to that of pure PLGA equivalents. E-PLGA membranes showed sustained EGCG release mediated by controlled diffusion and PLGA degradation over 28 days. EGCG did not adversely affect the tensile strength of PLGA membranes, whereas it significantly decreased the elastic modulus and increased the strain at break. E-PLGA membranes were significantly effective in

  9. Functionalized electrospun nanofibers as bioseparators in microfluidic systems.

    Science.gov (United States)

    Matlock-Colangelo, Lauren; Cho, Daehwan; Pitner, Christine L; Frey, Margaret W; Baeumner, Antje J

    2012-05-01

    Functionalized electrospun nanofibers were integrated into microfluidic channels to serve as on-chip bioseparators. Specifically, poly(vinyl alcohol) (PVA) nanofiber mats were shown to successfully serve as bioseparators for negatively charged nanoparticles. Nanofibers were electrospun onto gold microelectrodes, which were incorporated into poly(methyl methacrylate) (PMMA) microfluidic devices using UV-assisted thermal bonding. PVA nanofibers functionalized with poly(hexadimethrine bromide) (polybrene) were positively charged and successfully filtered negatively charged liposomes out of a buffer solution, while negatively charged nanofibers functionalized with Poly(methyl vinyl ether-alt-maleic anhydride) (POLY(MVE/MA)) were shown to repel the liposomes. The effect of fiber mat thickness was studied using confocal fluorescence microscopy, determining a quite broad optimal range of thicknesses for specific liposome retention, which simplifies fiber mat production with respect to retention reliability. Finally, it was demonstrated that liposomes bound to positively charged nanofibers could be selectively released using a 4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES)-sucrose-saline (HSS) solution of pH 9, which dramatically changes the nanofiber zeta potential and renders the positively charged nanofibers negatively charged. This is the first demonstration of functional electrospun nanofibers used to enable sample preparation procedures of isolation and concentration in lab-on-a-chip devices. This has far reaching impact on the ability to integrate functional surfaces and materials into microfluidic devices and to significantly expand their ability toward simple lab-on-a-chip devices.

  10. Electrospun PVDF nanofiber web as polymer electrolyte or separator

    Energy Technology Data Exchange (ETDEWEB)

    Sung-Seen Choi [Sejong University, Seoul (Korea). College of Natural Sciences, Department of Applied Chemistry; Young Soo Lee; Chang Whan Joo; Seung Goo Lee [Chungnam National University, Daejeon (Korea). Department of Textile Engineering; Jong Kyoo Park; Kyoo-Seung Han [Chungnam National University, Daejeon (Korea). Department of Fine Chemicals Engineering and Chemistry

    2004-11-30

    Electrospinning is an useful technique to produce nanofiber webs. Since electrospun nanofiber webs have a nanoporous structure, they have a potential application for a polymer electrolyte or a separator. Poly(vinylidene fluoride) (PVDF) is used as one of polymer electrolyte binders. We studied application of electrospun PVDF nanofiber webs as an electrolyte binder or a separator for a battery. Diameters of the electrospun PVDF nanofibers were 100-800 nm. The electrospun PVDF nanofiber web was thermally treated at 150-160 {sup o}C to improve the physical property and dimensional stability. The tensile strength and elongation at break as well as the tensile modulus were notably improved by the thermal treatment. Level of crystallinity of the electrospun PVDF nanofiber was increased by the thermal treatment. The ion conductivity of the polymer electrolyte formed from the electrospun PVDF nanofiber web and 1 M LiN(CF{sub 3}SO{sub 2}){sub 2} electrolyte solution was 1.6-2.0 x 10{sup -3} S/cm. The electrospun PVDF nanofiber mat was treated with ethylene plasma to use as a separator. The ethylene plasma-treated mat showed a role of shutter by melting the polyethylene (PE) layer grafted on the PVDF nanofibers. (author)

  11. Carbon nanofibers as hydrogen adsorbing materials for power sources

    Energy Technology Data Exchange (ETDEWEB)

    Danilov, M.O.; Kolbasov, G.Ya. [Institute of General and Inorganic Chemistry of the Ukrainian National Academy of Sciences, Prospekt Palladina 32/34, Kyiv 142 (Ukraine); Melezhyk, A.V. [TM Spetsmash Ltd., vul. Viskoznaya 5, build. 23, 02660 Kyiv (Ukraine)

    2008-01-21

    Porous carbon nanofibers are synthesized by CVD method from acetylene with use of iron-containing catalysts. Activation of the nanofibers in melted potassium hydroxide results in increasing surface area from initial 300-400 m{sup 2} g{sup -1} to 1700 m{sup 2} g{sup -1}. As follows from XRD data, activated nanofibers do not contain regular packages of graphene layers, but retain high electric conductivity. Deposition of copper improves electrochemical hydrogen storing characteristics of carbon nanofibers. Carbon nanomaterials obtained can be used as hydrogen storing materials in batteries instead of hydride forming metals. (author)

  12. Polyurethane nanofibers containing copper nanoparticles as future materials

    DEFF Research Database (Denmark)

    Sheikh, Faheem A.; Kanjwal, Muzafar Ahmed; Saran, Saurabh

    2011-01-01

    In the present study, we aimed to represent a novel approach to fabricate polyurethane nanofibers containing copper nanoparticles (NPs) by simple electrospinning process. A simple method, not depending on additional foreign chemicals, has been employed to utilize prepared copper NPs in polyurethane...... nanofibers. Typically, a colloidal gel consisting of copper NPs and polyurethane has been electrospun. SEM-EDX and TEM results confirmed well oriented nanofibers and good dispersion of pure copper NPs. Copper NPs have diameter in the range of 5–10nm. The thermal stability of the synthesized nanofibers...

  13. Damping Augmentation of Nanocomposites Using Carbon Nanofiber Paper

    Directory of Open Access Journals (Sweden)

    Gangbing Song

    2006-06-01

    Full Text Available Vacuum-assisted resin transfer molding (VARTM process was used to fabricate the nanocomposites through integrating carbon nanofiber paper into traditional glass fiber reinforced composites. The carbon nanofiber paper had a porous structure with highly entangled carbon nanofibers and short glass fibers. In this study, the carbon nanofiber paper was employed as an interlayer and surface layer of composite laminates to enhance the damping properties. Experiments conducted using the nanocomposite beam indicated up to 200–700% increase of the damping ratios at higher frequencies. The scanning electron microscopy (SEM characterization of the carbon nanofiber paper and the nanocomposites was also conducted to investigate the impregnation of carbon nanofiber paper by the resin during the VARTM process and the mechanics of damping augmentation. The study showed a complete penetration of the resin through the carbon nanofiber paper. The connectivities between carbon nanofibers and short glass fibers within the carbon nanofiber paper were responsible for the significant energy dissipation in the nanocomposites during the damping tests.

  14. Electrospun nickel oxide nanofibers: Microstructure and surface evolution

    Science.gov (United States)

    Khalil, Abdullah; Hashaikeh, Raed

    2015-12-01

    Nickel oxide (NiO) nanofibers with controlled microstructure were synthesized through the electrospinning technique using a solution composed of nickel acetate and polyvinyl alcohol. The microstructure of NiO nanofibers was found to be highly dependent on nickel acetate concentration in the solution and the post-heat treatment. As the nickel acetate concentration increases, the crystallinity index of NiO nanofibers increases from nearly 50 percent to 90 percent and the average crystallite size in the nanofibers increases from about 20 nm to 30 nm. Further, it was found that annealing the nanofibers at 1000 °C for 2 h leads to nearly full crystallization of nanofibers with significant increase in the crystallite size to about 50 nm while maintaining the fibrous shape. For low nickel acetate concentration, and because of the small nanofibers size, the surface of the calcined nanofibers showed oxygen deficiency which promises a superior activity of these NiO nanofibers for catalytic and sensing applications.

  15. The synthesis of titanium carbide-reinforced carbon nanofibers.

    Science.gov (United States)

    Zhu, Pinwen; Hong, Youliang; Liu, Bingbing; Zou, Guangtian

    2009-06-24

    Tailoring hard materials into nanoscale building blocks can greatly extend the applications of hard materials and, at the same time, also represents a significant challenge in the field of nanoscale science. This work reports a novel process for the preparation of carbon-based one-dimensional hard nanomaterials. The titanium carbide-carbon composite nanofibers with an average diameter of 90 nm are prepared by an electrospinning technique and a high temperature pyrolysis process. A composite solution containing polyacrylonitrile and titanium sources is first electrospun into the composite nanofibers, which are subsequently pyrolyzed to produce the desired products. The x-ray diffraction pattern and transmission electron microscopy results show that the main phase of the as-synthesized nanofibers is titanium carbide. The Raman analyses show that the composite nanofibers have low graphite clusters in comparison with the pure carbon nanofibers originating from the electrospun polyacrylonitrile nanofibers. The mechanical property tests demonstrate that the titanium carbide-carbon nanofiber membranes have four times higher tensile strength than the carbon nanofiber membranes, and the Young's modulus of the titanium carbide-carbon nanofiber membranes increases in direct proportion to the titanium quantity.

  16. Effect of Carbon Nanofiber on Mechanical Behavior of Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Saeed Ghaffarpour Jahromi

    2015-09-01

    Full Text Available Uses of fibers to improve material properties have a scientific background in recent years in civil engineering. Use of Nanofiber reinforcement of materials refers to incorporating materials with desired properties within some other materials lacking those properties. Use of fibers for improvement is not a new phenomenon as the technique of fiber-reinforced bitumen began as early as 1950, but using nanofiber is a new idea. In this research the mechanical properties of asphalt mixture that have been modified with carbon nanofiber were investigated using mechanical tests, which can improve the performance of flexible pavements. To evaluate the effect of nanofiber contents on bituminous mixtures, laboratory investigations were carried out on the samples with and without nanofibers. During the course of this study, various tests were undertaken applying the Marshall test, indirect tensile test, resistance to fatigue cracking by using repeated load indirect tensile test and creep test. Carbon nanofiber exhibited consistency in results and it was observed that the addition of nanofiber can change the properties of bituminous mixtures, increase its stability and decrease the flow value. Results indicate that nanofiber have the potential to resist structural distress in the pavement and thus improve fatigue by increasing resistance to cracks or permanent deformation, when growing traffic loads. On the whole, the results show that the addition of carbon nanofiber will improve some of the mechanical properties such as fatigue and deformation in the flexible pavement.

  17. Synthesis of Uniform Polyaniline Nanofibers through Interfacial Polymerization

    Directory of Open Access Journals (Sweden)

    Shahrir Hashim

    2012-08-01

    Full Text Available The present paper aims to study the preparation of polyaniline nanofibers through simple interfacial polymerization. Ammonium persulfate, hydrochloric acid and chloroform were used as oxidant, dopant and organic solvent respectively. Field Emission Scanning Electron Microscopy (FESEM, X-ray diffraction and Fourier Transform Infrared Spectroscopy (FTIR techniques were used to analyze the product. FESEM results show that polyaniline has nano-fiber morphology. XRD results show the crystalline properties of polyaniline nanofiber, and FTIR results confirmed the formation of polyaniline in different monomer/oxidant molar ratios. This study provides a better understanding on the synthesis of uniform polyaniline nanofibers through interfacial polymerization.

  18. Jet Shaping Nanofibers and the Collection of Nanofiber Mats in Electrospinning

    Institute of Scientific and Technical Information of China (English)

    Xinwei WANG; Jin CAO; Zuming HU; Wanlian PAN; Zhaofeng LIU

    2006-01-01

    Electrospinning is an effective way to produce nanofibers. Theconcentration or the corresponding viscosity of the spin solution is one of the most important variables to control the fiber morphology in electrospinning. Jet shaping nanofibers might be divided in two operating modes for different solution viscosity: split thinning and single thinning. From the analysis of jet single thinning, an equation to calculate the velocity of nanofibers depositing on the collector was educed and it was found that the velocity range was very different from the reported result. For the electrospun mats obtained from low solution concentration, the split is observed by scanning electron microscopy (SEM) images. On the other hand, the beads formation in the nanofiber mats can be explained well by jet splitting. The arrangement of nanofibers in the mats is related to the methods of collection, and the cylinder collector gets more ordered mats. This result is proved by so-called break strengths testing and SEM images of the mats obtained from different methods of collection.

  19. Electrospinning of nanofibers from non-polymeric systems: electrospun nanofibers from native cyclodextrins.

    Science.gov (United States)

    Celebioglu, Asli; Uyar, Tamer

    2013-08-15

    Electrospinning of nanofibers from non-polymeric systems is rather challenging, yet in this study, we have successfully performed electrospinning of nanofibers from two of the native cyclodextrins (CDs); α-CD and β-CD. Electrospinning was carried out for highly concentrated solutions of α-CD (120% up to 160%, w/v) and β-CD (120% up to 150%, w/v) in basic aqueous system. At optimal concentration level, the electrospinning of CD solutions yielded bead-free uniform CD nanofibers without using carrier polymeric matrix. Similar to polymeric systems, the electrospinning of CD solutions resulted in different morphologies and average fiber diameters depending on the CD type and CD concentration. The dynamic light scattering (DLS) and rheology measurements were performed in order to examine the electrospinnability of CD solutions. The existence of CD aggregates via hydrogen bonding and very high solution viscosity and viscoelastic solid-like behavior of CD solutions were found to be the key factors for obtaining bead-free nanofibers from CDs. The addition of urea disrupted CD aggregates and lowered the viscosity significantly, and therefore, the urea-added CD solutions yielded beaded fibers and/or beads. Although the as-received CDs in powder form are crystalline, the structural analyses by XRD and HR-TEM indicated that electrospun CD nanofibers have amorphous characteristic without showing any particular orientation or crystalline aggregation of CD molecules.

  20. Formation of inorganic nanofibers by heat-treatment of poly(vinyl alcohol-zirconium compound hybrid nanofibers

    Directory of Open Access Journals (Sweden)

    Nakane K.

    2013-01-01

    Full Text Available Poly(vinyl alcohol-zirconium compound hybrid nanofibers (precursors were formed by electrospinning employing water as a solvent for the spinning solution. The precursors were converted into oxide (ZrO2, carbide (ZrC or nitride (ZrN nanofibers by heating them in air, Ar or N2 atmospheres. Monoclinic ZrO2 nanofibers with high-specific surface area were obtained by heat-treatment of the precursors in air. ZrC and ZrN nanofibers could be obtained below theoretical temperatures calculated from thermodynamics data.

  1. Electrospun Nanofibers of Guar Galactomannan for Targeted Drug Delivery

    Science.gov (United States)

    Chu, Hsiao Mei Annie

    2011-12-01

    Guar galactomannan is a biodegradable polysaccharide used widely in the food industry but also in the cosmetics, pharmaceutical, oil drilling, textile and paper industries. Guar consists of a mannose backbone and galactose side groups that are both susceptible to enzyme degradation, a unique property that can be explored for targeted drug delivery especially since those enzymes are naturally secreted by the microflora in human colon. The present study can be divided into three parts. In the first part, we discuss ways to modify guar to produce nanofibers by electrospinning, a process that involves the application of an electric field to a polymer solution or melt to facilitate production of fibers in the sub-micron range. Nanofibers are currently being explored as the next generation of drug carriers due to its many advantages, none more important than the fact that nanofibers are on a size scale that is a fraction of a hair's width and have large surface-to-volume ratio. The incorporation and controlled release of nano-sized drugs is one way in which nanofibers are being utilized in drug delivery. In the second part of the study, we explore various methods to crosslink guar nanofibers as a means to promote water-resistance in a potential drug carrier. The scope and utility of water-resistant guar nanofibers can only be fully appreciated when subsequent drug release studies are carried out. To that end, the third part of our study focuses on understanding the kinetics and diffusion mechanisms of a model drug, Rhodamine B, through moderately-swelling (crosslinked) hydrogel nanofibers in comparison to rapidly-swelling (non-crosslinked) nanofibers. Along the way, our investigations led us to a novel electrospinning set-up that has a unique collector designed to capture aligned nanofibers. These aligned nanofiber bundles can then be twisted to hold them together like yarn. From a practical standpoint, these yarns are advantageous because they come freely suspended and

  2. Antifouling Electrospun Nanofiber Mats Functionalized with Polymer Zwitterions.

    Science.gov (United States)

    Kolewe, Kristopher W; Dobosz, Kerianne M; Rieger, Katrina A; Chang, Chia-Chih; Emrick, Todd; Schiffman, Jessica D

    2016-10-06

    In this study, we exploit the excellent fouling resistance of polymer zwitterions and present electrospun nanofiber mats surface functionalized with poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC). This zwitterionic polymer coating maximizes the accessibility of the zwitterion to effectively limit biofouling on nanofiber membranes. Two facile, scalable methods yielded a coating on cellulose nanofibers: (i) a two-step sequential deposition featuring dopamine polymerization followed by the physioadsorption of polyMPC, and (ii) a one-step codeposition of polydopamine (PDA) with polyMPC. While the sequential and codeposited nanofiber mat assemblies have an equivalent average fiber diameter, hydrophilic contact angle, surface chemistry, and stability, the topography of nanofibers prepared by codeposition were smoother. Protein and microbial antifouling performance of the zwitterion modified nanofiber mats along with two controls, cellulose (unmodified) and PDA coated nanofiber mats were evaluated by dynamic protein fouling and prolonged bacterial exposure. Following 21 days of exposure to bovine serum albumin, the sequential nanofiber mats significantly resisted protein fouling, as indicated by their 95% flux recovery ratio in a water flux experiment, a 300% improvement over the cellulose nanofiber mats. When challenged with two model microbes Escherichia coli and Staphylococcus aureus for 24 h, both zwitterion modifications demonstrated superior fouling resistance by statistically reducing microbial attachment over the two controls. This study demonstrates that, by decorating the surfaces of chemically and mechanically robust cellulose nanofiber mats with polyMPC, we can generate high performance, free-standing nanofiber mats that hold potential in applications where antifouling materials are imperative, such as tissue engineering scaffolds and water purification technologies.

  3. Electrospinning of Chitosan-Xanthan Nanofibers

    DEFF Research Database (Denmark)

    Shekarforoush, Elhamalsadat; Mendes, Ana Carina Loureiro; Chronakis, Ioannis S.

    Electrospun chitosan-xanthan gum nanofibers were produced and the correlation between the rheological properties of chitosan-xanthan solutions and electrospinability were investigated at different xanthan gum concentrations. Uniform chitosan-xanthan nanofibers with diameters ranging from 382......+182 to 842+296 nm were developed based on the chitosan-xanthan gum content. Overall chitosan-xanthan gum solutions exhibited shear thinning behavior for all the concentrations tested, which tended to increase with the increase of concentration of xanthan. Furthermore the electrical conductivity...... of the chitosan-xanthan solutions was observed to increase with the increase of xanthan gum concentrations. We can conclude that the optimal electrospinning process is directed by the apparent viscosity properties and the electrical conductivity of the chitosan-xanthan solutions. We are currently investigating...

  4. Temperature responsive hydrogel nanofibers and nanoparticles

    Science.gov (United States)

    Ruokolainen, Janne

    2011-03-01

    Poly(N-isopropylacrylamide) (PNIPAM) is one of the most extensively investigated synthetic temperature-responsive polymers. In this work temperature-responsive PNIPAM based triblock copolymer hydrogels, their self-assembly and phase behavior in bulk, are described. Additionally, recent results from responsive hydrogel nanofibers and hydrogel nanoparticles are shown. It is known that block copolymers form well-organized nano structures in bulk or thin films when annealed thermally or in solvent vapours. However, in the case of nanofibers or nanoparticles, the annealing leads in most cases to aggregation and particle sintering. This work utilizes aerosol-based gas phase method where the preparation and annealing of hydrogel nanoparticles with well-organized, hierarchical inner structures are performed without any particle coagulation or sintering. In the method, the block copolymers assemble within aerosol nanoparticles to form, for instance, lamellar onion-like or gyroid inner structures.

  5. Process Dependence of Cellulose Nanofiber Fabrication

    Science.gov (United States)

    Henderson, Doug; Zhang, Xin; Mao, Yimin; Jang, Soo-Hwan; Hu, Liangbing; Briber, Robert; Wang, Howard

    Cellulose nanofibers (CNF) are the most abundant natural nanomaterial on earth with potential applications in renewable energy, polymer nanocomposites and flexible electronics. CNF can be produced through TEMPO oxidation which separates the hierarchical structure of cellulose fibers into smaller micro- and nanofibers by altering their surface chemistry, inducing a repulsive electrostatic charge on the fibers. This work will examine the structural evolution of CNF during production. Samples were prepared by removing and quenching aliquots during the TEMPO reaction. The fibers were washed, filtered and re-dispersed into D2O for small angle neutron scattering (SANS) measurements. The SANS data was analyzed to track the changes in the CNF structure as a function of reaction time.

  6. Photopatterned conjugated polymer electrochromic nanofibers on paper

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, A; Asemota, C; Invernale, M; Sotzing, G A [Department of Chemistry and the Polymer Program, 97, N. Eagleville Road, University of Connecticut, Storrs, CT-06269-3136 (United States); Padilla, J; Otero, T F [Center for Electrochemistry and Intelligent Materials C/Carlos III s/n, Campus Alfonso XIII, Polytechnic University of Cartagena, 30203 (Spain)], E-mail: sotzing@ims.uconn.edu

    2008-08-15

    Electrochromic nanofibers of conducting polymer (terthiophene) have been deposited over a conventional paper sheet by means of the electrospinning technique, and subsequently photopatterned by means of UV radiation. The synthesis of a processable precursor copolymer with a norbornylene matrix and pendant units of terthiophene makes the electrospinning process available, and allows for chemical or electrochemical crosslinking of the precursor copolymer to obtain a conducting polymer. The inclusion of photocrosslinkable units (methacrylate) in the precursor copolymer also allows for photopatterning of the material. This was applied to obtain patterns on the paper which can be chemically oxidized or reduced resulting in electrochromic characters. SEM images of the conducting polymer nanofibers together with the cellulose fibers show how these materials can be attached to textile fibers, adding new functionalities that are reminiscent of the chameleonic abilities of some living creatures.

  7. General strategy for fabricating thoroughly mesoporous nanofibers

    KAUST Repository

    Hou, Huilin

    2014-12-03

    Recently, preparation of mesoporous fibers has attracted extensive attentions because of their unique and broad applications in photocatalysis, optoelectronics, and biomaterials. However, it remains a great challenge to fabricate thoroughly mesoporous nanofibers with high purity and uniformity. Here, we report a general, simple and cost-effective strategy, namely, foaming-assisted electrospinning, for producing mesoporous nanofibers with high purity and enhanced specific surface areas. As a proof of concept, the as-fabricated mesoporous TiO2 fibers exhibit much higher photocatalytic activity and stability than both the conventional solid counterparts and the commercially available P25. The abundant vapors released from the introduced foaming agents are responsible for the creation of pores with uniform spatial distribution in the spun precursor fibers. The present work represents a critically important step in advancing the electrospinning technique for generating mesoporous fibers in a facile and universal manner.

  8. Optical Micro- and Nanofiber Pulling Rig

    CERN Document Server

    Ward, J M; Le, Vu H; Chormaic, S Nic

    2014-01-01

    We review the method of producing adiabatic optical micro- and nanofibers using a hydrogen/oxygen flame brushing technique. The flame is scanned along the fiber, which is being simultaneously stretched by two translation stages. The tapered fiber fabrication is reproducible and yields highly adiabatic tapers with either exponential or linear profiles. Details regarding the setup of the flame brushing rig and the various parameters used are presented. Information available from the literature is compiled and further details that are necessary to have a functioning pulling rig are included. This should enable the reader to fabricate various taper profiles, while achieving adiabatic transmission of ~ 99% for fundamental mode propagation. Using this rig, transmissions greater than 90% for higher order modes in an optical nanofiber have been obtained.

  9. Composites incorporated a conductive polymer nanofiber network

    Energy Technology Data Exchange (ETDEWEB)

    Pozzo, Lilo Danielle; Newbloom, Gregory

    2017-04-11

    Methods of forming composites that incorporate networks of conductive polymer nanofibers are provided. Networks of less-than conductive polymers are first formed and then doped with a chemical dopant to provide networks of conductive polymers. The networks of conductive polymers are then incorporated into a matrix in order to improve the conductivity of the matrix. The formed composites are useful as conductive coatings for applications including electromagnetic energy management on exterior surfaces of vehicles.

  10. Carbon nanofibers encapsulated in macropores in silicon

    Energy Technology Data Exchange (ETDEWEB)

    Starkov, V.; Red' kin, A. [Institute of Microelectronics Technology and High Purity Materials, RAS, Institutskaya str. 6, Chernogolovka 142432 (Russian Federation)

    2007-05-15

    This work reports on the development of fuel cells electrodes with a porous silicon structure and carbon nanofibers encapsulated in macropores in silicon. It is demonstrated that decomposition of carbon on a Ni catalyst deposited on the pore walls can be used to create a homogeneous carbon nanotube layer that dramatically increases the specific surface area while simultaneously reducing the resistivity of the macroporous silicon layer. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. Multifunctional Composite Nanofibers for Smart Structures

    Science.gov (United States)

    2011-10-13

    translated to the composite nanofibrous structures in the form of nonwovens and yarns? (3) Can these functional composite fibers be integrated into...nanoparticles were co- electrospun into nonwoven mat and over meter long yarn. The SEM and TEM image in Report Documentation Page Form ApprovedOMB No...functional composite nanofiber structures (yarn and nonwoven ) characterized we explored the feasibility of integrating these functional composite fibers into

  12. Carbonized Electrospun Nanofiber Sheets for Thermophones.

    Science.gov (United States)

    Aliev, Ali E; Perananthan, Sahila; Ferraris, John P

    2016-11-16

    Thermoacoustic performance of thin freestanding sheets of carbonized poly(acrylonitrile) and polybenzimidazole nanofibers are studied as promising candidates for thermophones. We analyze thermodynamic properties of sheets using transport parameters of single nanofibers and their aligned and randomly electrospun thin film assemblies. The electrical and thermal conductivities, thermal diffusivity, heat capacity, and infrared blackbody radiation are investigated to extract the heat exchange coefficient and enhance the energy conversion efficiency. Spectral and power dependencies of sound pressure in air are compared with carbon nanotube sheets and theoretical prediction. Despite lower thermoacoustic performance compared to that of CNT sheets, the mechanical strength and cost-effective production technology of thermophones make them very attractive for large-size sound projectors. The advantages of carbonized electrospun polymer nanofiber sheets are in the low frequency domain (<1000 Hz), where the large thermal diffusion length diminishes the thermal inertia of thick (∼200 nm) nonbundled fibers and the high intrinsic thermal conductivity of fibers enhances the heat exchange coefficient. Applications of thermoacoustic projectors for loudspeakers, high power SONAR arrays, and sound cancellation are discussed.

  13. Perspectives: Nanofibers and nanowires for disordered photonics

    Directory of Open Access Journals (Sweden)

    Dario Pisignano

    2017-03-01

    Full Text Available As building blocks of microscopically non-homogeneous materials, semiconductor nanowires and polymer nanofibers are emerging component materials for disordered photonics, with unique properties of light emission and scattering. Effects found in assemblies of nanowires and nanofibers include broadband reflection, significant localization of light, strong and collective multiple scattering, enhanced absorption of incident photons, synergistic effects with plasmonic particles, and random lasing. We highlight recent related discoveries, with a focus on material aspects. The control of spatial correlations in complex assemblies during deposition, the coupling of modes with efficient transmission channels provided by nanofiber waveguides, and the embedment of random architectures into individually coded nanowires will allow the potential of these photonic materials to be fully exploited, unconventional physics to be highlighted, and next-generation optical devices to be achieved. The prospects opened by this technology include enhanced random lasing and mode-locking, multi-directionally guided coupling to sensors and receivers, and low-cost encrypting miniatures for encoders and labels.

  14. Investigation of electrochemical actuation by polyaniline nanofibers

    Science.gov (United States)

    Mehraeen, Shayan; Alkan Gürsel, Selmiye; Papila, Melih; Çakmak Cebeci, Fevzi

    2017-09-01

    Polyaniline nanofibers have shown promising electrical and electrochemical properties which make them prominent candidates in the development of smart systems employing sensors and actuators. Their electrochemical actuation potential is demonstrated in this study. A trilayer composite actuator based on polyaniline nanofibers was designed and fabricated. Cross-linked polyvinyl alcohol was sandwiched between two polyaniline nanofibrous electrodes as ion-containing electrolyte gel. First, electrochemical behavior of a single electrode was studied, showing reversible redox peak pairs in 1 M HCl using a cyclic voltammetry technique. High aspect ratio polyaniline nanofibers create a porous network which facilitates ion diffusion and thus accelerates redox reactions. Bending displacement of the prepared trilayer actuator was then tested and reported under an AC potential stimulation as low as 0.5 V in a variety of frequencies from 50 to 1000 mHz, both inside 1 M HCl solution and in air. Decay of performance of the composite actuator in air is investigated and it is reported that tip displacement in a solution was stable and repeatable for 1000 s in all selected frequencies.

  15. Cooperative Switching in Nanofibers of Azobenzene Oligomers

    Science.gov (United States)

    Weber, Christopher; Liebig, Tobias; Gensler, Manuel; Zykov, Anton; Pithan, Linus; Rabe, Jürgen P.; Hecht, Stefan; Bléger, David; Kowarik, Stefan

    2016-05-01

    Next-generation molecular devices and machines demand the integration of molecular switches into hierarchical assemblies to amplify the response of the system from the molecular level to the meso- or macro-scale. Here, we demonstrate that multi-azobenzene oligomers can assemble to form robust supramolecular nanofibers in which they can be switched repeatedly between the E- and Z-configuration. While in isolated oligomers the azobenzene units undergo reversible photoisomerization independently, in the nanofibers they are coupled via intermolecular interactions and switch cooperatively as evidenced by unusual thermal and kinetic behavior. We find that the photoisomerization rate from the Z-isomer to the E-isomer depends on the fraction of Z-azobenzene in the nanofibers, and is increased by more than a factor of 4 in Z-rich fibers when compared to E-rich fibers. This demonstrates the great potential of coupling individual photochromic units for increasing their quantum efficiency in the solid state with potential relevance for actuation and sensing.

  16. Nanomembranes and Nanofibers from Biodegradable Conducting Polymers

    Directory of Open Access Journals (Sweden)

    Jordi Puiggalí

    2013-09-01

    Full Text Available This review provides a current status report of the field concerning preparation of fibrous mats based on biodegradable (e.g., aliphatic polyesters such as polylactide or polycaprolactone and conducting polymers (e.g., polyaniline, polypirrole or polythiophenes. These materials have potential biomedical applications (e.g., tissue engineering or drug delivery systems and can be combined to get free-standing nanomembranes and nanofibers that retain the better properties of their corresponding individual components. Systems based on biodegradable and conducting polymers constitute nowadays one of the most promising solutions to develop advanced materials enable to cover aspects like local stimulation of desired tissue, time controlled drug release and stimulation of either the proliferation or differentiation of various cell types. The first sections of the review are focused on a general overview of conducting and biodegradable polymers most usually employed and the explanation of the most suitable techniques for preparing nanofibers and nanomembranes (i.e., electrospinning and spin coating. Following sections are organized according to the base conducting polymer (e.g., Sections 4–6 describe hybrid systems having aniline, pyrrole and thiophene units, respectively. Each one of these sections includes specific subsections dealing with applications in a nanofiber or nanomembrane form. Finally, miscellaneous systems and concluding remarks are given in the two last sections.

  17. Bioactive glasses: Frontiers and challenges

    Directory of Open Access Journals (Sweden)

    Larry L. Hench

    2015-11-01

    Full Text Available Bioactive glasses were discovered in 1969 and provided for the first time an alternative to nearly inert implant materials. Bioglass formed a rapid, strong and stable bond with host tissues. This article examines the frontiers of research crossed to achieve clinical use of bioactive glasses and glass-ceramics. In the 1980’s it was discovered that bioactive glasses could be used in particulate form to stimulate osteogenesis, which thereby led to the concept of regeneration of tissues. Later, it was discovered that the dissolution ions from the glasses behaved like growth factors, providing signals to the cells. This article summarizes the frontiers of knowledge crossed during four eras of development of bioactive glasses that have led from concept of bioactivity to widespread clinical and commercial use, with emphasis on the first composition, 45S5 Bioglass®. The four eras are: a discovery; b clinical application; c tissue regeneration; and d innovation. Questions still to be answered for the fourth era are included to stimulate innovation in the field and exploration of new frontiers that can be the basis for a general theory of bioactive stimulation of regeneration of tissues and application to numerous clinical needs.

  18. Bioactive proteins from pipefishes

    Institute of Scientific and Technical Information of China (English)

    E. Rethna Priya; S. Ravichandran; R. Ezhilmathi

    2013-01-01

    Objective: To screen antimicrobial potence of some pipefish species collected from Tuticorin coastal environment.Methods:Antimicrobial activity of pipefishes in methanol extract was investigated against 10 bacterial and 10 fungal human pathogenic strains.Results:Among the tested strains, in Centriscus scutatus, pipefish showed maximum zone of inhibition against Vibrio cholerae (8 mm) and minimum in the sample of Hippichthys cyanospilos against Klebseilla pneumoniae (2 mm). In positive control, maximum zone of inhibition was recorded in Vibrio cholerae (9 mm) and minimum in Klebseilla pneumoniae, and Salmonella paratyphi (5 mm). Chemical investigation indicated the presence of peptides as evidenced by ninhydrin positive spots on thin layer chromatography and presence of peptide. In SDS PAGE, in Centriscus scutatus, four bands were detected in the gel that represented the presence of proteins in the range nearly 25.8-75 kDa. In Hippichthys cyanospilos, five bands were detected in the gel that represented the presence of proteins in the range nearly 20.5-78 kDa. The result of FT-IR spectrum revealed that the pipe fishes extracts compriseed to have peptide derivatives as their predominant chemical groups.Conclusions:It can be conclude that this present investigation suggests the tested pipe fishes will be a potential source of natural bioactive compounds.

  19. Polyurethane nanofibers containing copper nanoparticles as future materials

    Science.gov (United States)

    Sheikh, Faheem A.; Kanjwal, Muzafar A.; Saran, Saurabh; Chung, Wook-Jin; Kim, Hern

    2011-01-01

    In the present study, we aimed to represent a novel approach to fabricate polyurethane nanofibers containing copper nanoparticles (NPs) by simple electrospinning process. A simple method, not depending on additional foreign chemicals, has been employed to utilize prepared copper NPs in polyurethane nanofibers. Typically, a colloidal gel consisting of copper NPs and polyurethane has been electrospun. SEM-EDX and TEM results confirmed well oriented nanofibers and good dispersion of pure copper NPs. Copper NPs have diameter in the range of 5-10 nm. The thermal stability of the synthesized nanofibers was examined for identifying the proper settlement of copper NPs among the nanofibers, according to the concentrations used in original solutions. Furthermore, XRD results well demonstrated crystalline feature of copper NPs. Model microorganisms Escherichia coli and Bacillus subtillus had been used to check the antimicrobial efficacy of these nanofiber mats. Subsequently, antimicrobial tests have indicated that the prepared nanofibers do posses good bactericidal effect. Accordingly, it is noted that the obtained nanofiber mats can be used as future filter membranes with good antimicrobial activities.

  20. Surface structure enhanced second harmonic generation in organic nanofibers

    DEFF Research Database (Denmark)

    Fiutowski, Jacek; Maibohm, Christian; Kostiucenko, Oksana;

    Second-harmonic generation upon femto-second laser irradiation of nonlinearly optically active nanofibers grown from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules is investigated. Following growth on mica templates, the nanofibers have been transferred onto lithography-d...

  1. The photophysics of luminescence in multilayered organic nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Quochi, Francesco; Simbrunner, Clemens

    Multilayered crystalline nanofibers are exemplary model system for the study of exciton dynamics and lasing in organic materials due to their well-defined morphology, high luminescence efficiencies, and color tunability. The multi-layered nanofibers are composed of alternating layers of two...

  2. Blow spinning of food-grade-gelatin nanofibers (abstract)

    Science.gov (United States)

    Nanofibers have been examined for many diverse applications, including catalysis, filtration, controlled release of drugs and active agents, sensor, and tissue engineering and as texturized food ingredients. The primary advantage of nanofibers over larger diameter fibers is the larger surface area t...

  3. Direct fabrication of cerium oxide hollow nanofibers by electrospinning

    Institute of Scientific and Technical Information of China (English)

    CUI Qizheng; DONG Xiangting; WANG Jinxian; LI Mei

    2008-01-01

    Electrospinning technique was used to fabricate PVP/Ce(NO3)3 composite mierofibers. Different morphological CeO2 nanofibers were obtained by calcination of the PVP/Ce(NO3)3 composite microfibers and were characterized by scanning electron microscopy (SEM),Transmission electron microscopy (TEM), X-ray diffraction (XRD), thermal gravimetric and differential thermal analysis (TG-DTA), and (FHR). SEM micrographs indicated that the surface of the composite fibers was smooth and became coarse with the increase of calcination temperatures. The diameters of CeO2 hollow nanofibers (300 nm at 600 ℃ and 600 nm at 800 ℃) were smaller than those of PVP/Ce(NO3)3 composite fibers (1-2 μm). CeO2 hollow nanofibers were obtained at 600 ℃ and CeO2 hollow and porous nanofibers formed by nanoparti-ties were obtained at 800 ℃. The length of the CeO2 hollow nanofibers was greater than 50 μm. XRD analysis revealed that the composite microfibers were amorphous in structure and CeO2 nanofibers were cubic in structure with space groupO5H-FM3m when calcination tem-peratures were 600-800 ℃. TG-DTA and FTIR revealed that the formation of CeO2 nanofibers was largely influenced by the calcination temperatures. Possible formation mechanism of CeO2 hollow nanofibers was proposed.

  4. Myocardial Cell Pattern on Piezoelectric Nanofiber Mats for Energy Harvesting

    Science.gov (United States)

    Liu, X.; Wang, X.; Zhao, H.; Du, Y.

    2014-11-01

    The paper presents in vitro contractile myocardial cell pattern on piezoelectric nanofiber mats with applications in energy harvesting. The cell-based energy harvester consists of myocardial cell sheet and a PDMS substrate with a PVDF nanofiber mat on. Experimentally, cultured on specifically distributed nanofiber mats, neonatal rat ventricular cardiomyocytes are characterized with the related morphology and contraction. Previously, we have come up with the concept of energy harvesting from heart beating using piezoelectric material. A bio-hybrid energy harvester combined living cardiomyocytes, PDMS polymer substrate and piezoelectric PVDF film with the electrical output of peak current 87.5nA and peak voltage 92.3mV. However, the thickness of the cardiomyocyte cultured on a two-dimensional substrate is much less than that of the piezoelectric film. The Micro Contact Printing (μCP) method used in cell pattern on the PDMS thin film has tough requirement for the film surface. As such, in this paper we fabricated nanofiber-constructed PDMS thin film to realize cell pattern due to PVDF nanofibers with better piezoelectricity and microstructures of nanofiber mats guiding cell distribution. Living cardiomyocytes patterned on those distributed piezoelectric nanofibers with the result of the same distribution as the nanofiber pattern.

  5. Fabrication of NiO/zirconium oxide nanofibers by electrospinning

    Energy Technology Data Exchange (ETDEWEB)

    Sundarrajan, Subramanian, E-mail: sundarnus1@gmail.com [Department of Mechanical Engineering, NUS, 117576 (Singapore); Venkatesan, Arunachalam; Agarwal, Satya R.; Shaik Anwar Ahamed, Nabeela Nasreen [Department of Mechanical Engineering, NUS, 117576 (Singapore); Ramakrishna, Seeram, E-mail: seeram@nus.edu.sg [Department of Mechanical Engineering, NUS, 117576 (Singapore); King Saud University, Riyadh 11451 (Saudi Arabia); Institute of Materials Research and Engineering, 117602 (Singapore)

    2014-12-01

    The electrospinning technique has been used to fabricate 1D inorganic–organic composite nanofibers from solutions containing poly(vinyl alcohol) (PVA) and suitable aqueous precursors of nickel and zirconium ions. Upon calcination, nickel oxide/zirconia nanofibers retained the original morphological features of as-spun nanofibers. X-ray diffraction was used to identify the crystalline nature of the final product and analytical tools such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM) were employed to elucidate the pathway of ceramic phase formation and the systematic evolution of morphological features in the as-spun and calcined fibers. These fibers will find potential applications in biomedical field. - Highlights: • PVA/NiO/zirconia composite nanofibers were synthesized via electrospinning. • Green processing of nanofibers using only water as solvent. • Calcination of composite nanofibers to yield ceramic nanofibers. • High aspect ratio nanofibers with diameters 106 ± 25 nm • The application of these fibers as dental composites and bone tissue engineering.

  6. UV-responsive polyvinyl alcohol nanofibers prepared by electrospinning

    Science.gov (United States)

    Khatri, Zeeshan; Ali, Shamshad; Khatri, Imran; Mayakrishnan, Gopiraman; Kim, Seong Hun; Kim, Ick-Soo

    2015-07-01

    We report UV-responsive polyvinyl alcohol (PVA) nanofibers for potential application for recording and erasing quick response (QR) codes. We incorporate 1‧-3‧-dihydro-8-methoxy-1‧,3‧,3‧-trimethyl-6-nitrospiro [2H-1-benzopyran-2,2‧-(2H)-indole] (indole) and,3-dihydro-1,3,3-trimethylspiro [2H-indole-2,3‧-[3H] phenanthr [9,10-b] (1,4) oxazine] (oxazine) into PVA polymer matrix via electrospinning technique. The resultant nanofibers were measured for recording-erasing, photo-coloration and thermal reversibility. The rate of photo-coloration of PVA-indole nanofibers was five times higher than the PVA-oxazine nanofibers, whereas the thermal reversibility found to be more than twice as fast as PVA-oxazine nanofibers. Results showed that the resultant nanofibers have very good capability of recording QR codes multiple times. The FTIR spectroscopy and SEM were employed to characterize the electrospun nanofibers. The UV-responsive PVA nanofibers have great potentials as a light-driven nanomaterials incorporated within sensors, sensitive displays and in optical devices such as erasable and rewritable optical storage.

  7. Development of braided drug-loaded nanofiber sutures

    Energy Technology Data Exchange (ETDEWEB)

    Hu Wen [School of Materials Science and Engineering, Tongji University, 1239 Siping Road, Shanghai 200092 (China); Huang Zhengming [School of Aerospace Engineering and Applied Mechanics, Tongji University, 1239 Siping Road, Shanghai 200092 (China); Liu Xiangyang, E-mail: huangzm@tongji.edu.cn [Department of Physics, National University of Singapore, 2 Science Drive 3, 117542 (Singapore)

    2010-08-06

    The objectives of this work are twofold. Firstly, while most work on electrospinning is limited to the development of only functional materials, a structural application of electrospun nanofibers is explored. Secondly, a drug-loaded tissue suture is fabricated and its various properties are characterized. Braided drug-loaded nanofiber sutures are obtained by combining an electrospinning process with a braiding technique followed by a coating procedure. Two different electrospinning techniques, i.e. blend and coaxial electrospinning, to incorporate a model drug cefotaxime sodium (CFX-Na) into poly(L-lactic acid) (PLLA) nanofibers have been applied and compared with each other. Properties of the braided drug-loaded sutures are characterized through a variety of methods including SEM, TEM and tensile testing. The results show that the nanofibers had a preferable micromorphology. The drug was incorporated into the polymer nanofibers homogeneously, with no cross-linking. The nanofibers maintained their fibrous structures. An in vitro release study indicates that the drug-loaded nanofibers fabricated by blend electrospinning and coaxial electrospinning had a different drug release behavior. An inhibition zone experiment shows that both sutures obtained from the nanofibers of the different electrospinning techniques had favorable antibacterial properties. The drug-loaded sutures had preferable histological compatibility performance compared with commercial silk sutures in an in vivo comparative study.

  8. Nanofiber of ultra-structured aluminum and zirconium oxide hybrid.

    Science.gov (United States)

    Kim, Hae-Won; Kim, Hyoun-Ee

    2006-02-01

    An internally ultrastructured Al- and Zr-oxide hybrid was developed into a nanofiber. As a precursor for the generation of nanofiber, a hybridized sol was prepared using the Pechini-type sol-gel process, whereby the Al- and Zr-metallic ions were to be efficiently distributed and stabilized within the polymeric network. The hybridized sol was subsequently electrospun and heat treated to a nanofiber with diameters of tens to hundreds of nanometers. The internal structure of the nanofiber was organized at the molecular level, with the Al- and Zr-oxide regions being interspaced at distances of less than ten nanometers. This ultrastructured Al- and Zr-oxide hybrid nanofiber is considered to be potentially applicable in numerous fields.

  9. Layered Perovskite Nanofibers via Electrospinning for Overall Water Splitting.

    Science.gov (United States)

    Hildebrandt, Nils C; Soldat, Julia; Marschall, Roland

    2015-05-06

    The (111)-layered perovskite materials Ba5 Ta4 O15 , Ba5 Ta2 Nb2 O15 and Ba5 Nb4 O15 are prepared with nanofiber morphology via electrospinning for the first time. The nanofibers are built up from small single crystals, with up to several micrometers length even after calcination. The formation mechanism is investigated in detail, revealing an intermediate formation of amorphous barium carbonate strengthening the nanofiber morphology for high temperature treatment. All nanofiber compounds are able to generate hydrogen without any co-catalyst in photocatalytic reformation of methanol. After photodeposition of Rh-Cr2 O3 co-catalysts, the nanofibers show better activity in overall water splitting compared to sol-gel-derived powders.

  10. Preparation of natural brucite nanofibers by the dispersion method

    Institute of Scientific and Technical Information of China (English)

    Li Xu; Wen Ni; Wenping Li; Xingde Liu; Hailong Yang; Xiaoguang Yang

    2008-01-01

    The preparation of natural brucite nanofibers through dispersion by the wet process is described. The test results indicate that brucite fibers can be well dispersed by using sodium dioctyl sulfosuccinate (OT) as the dispersant at a dispersant/fiber mass ratio of 0.15:1, dispersing for 30 min at a water/solid mass ratio of 20:1. The prepared nanofibers were characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM). It is shown that the prepared single brucite nanofiber is around 30 run in diameter and the talus of the nonsingle brucite nanofibers is about 50-150 nm in diameter. Natural brucite mineral fibers were treated by the dispersion method to obtain nanomaterials. These fibers have significant advantages over artificial nanofibers both in yield and in cost.

  11. A Nanofiber-Based Optical Conveyor Belt for Cold Atoms

    CERN Document Server

    Schneeweiss, Philipp; Mitsch, Rudolf; Reitz, Daniel; Vetsch, Eugen; Rauschenbeutel, Arno

    2012-01-01

    We demonstrate optical transport of cold cesium atoms over millimeter-scale distances along an optical nanofiber. The atoms are trapped in a one-dimensional optical lattice formed by a two-color evanescent field surrounding the nanofiber, far red- and blue-detuned with respect to the atomic transition. The blue-detuned field is a propagating nanofiber-guided mode while the red-detuned field is a standing-wave mode which leads to the periodic axial confinement of the atoms. Here, this standing wave is used for transporting the atoms along the nanofiber by mutually detuning the two counter-propagating fields which form the standing wave. The performance and limitations of the nanofiber-based transport are evaluated and possible applications are discussed.

  12. Study on the Electrospun CNTs/Polyacrylonitrile-Based Nanofiber Composites

    Directory of Open Access Journals (Sweden)

    Bo Qiao

    2011-01-01

    Full Text Available CNTs/PAN nanofibers were electrospun from PAN-based solution for the preparation of carbon nanofiber composites. The as-spun polyacrylonitrile-based nanofibers were hot-stretched by weighing metal in a temperature controlled oven. Scanning electron microscopy (SEM and transmission electron microscopy (TEM were used to characterize the morphology of the nanofibers, which indicated that carbon nanotubes were dispersed well in the composites and were completely wrapped by PAN matrix. Because of the strong interfacial interaction between CNTs and PAN, the CNTs/PAN application performance will be enhanced correspondingly, such as the mechanical properties and the electrical conductivity. It was concluded that the hot-stretched CNTs/PAN nanofibers can be used as a potential precursor to produce high-performance carbon composites.

  13. Improved Electrical Conductivity of Carbon/Polyvinyl Alcohol Electrospun Nanofibers

    Directory of Open Access Journals (Sweden)

    Nader Shehata

    2015-01-01

    Full Text Available Carbon nanofibers (CNFs gained much interest in the last few years due to their promising electrical, chemical, and mechanical characteristics. This paper investigates a new nanocomposite composed of carbon nanofibers hosted by PVA and both are integrated in one electrospun nanofibers web. This technique shows a simple and cheap way to offer a host for CNFs using traditional deposition techniques. The results show that electrical conductivity of the formed nanofibers has been improved up to 1.63 × 10−4 S/cm for CNFs of weight 2%. The peak temperature of mass loss through TGA measurements has been reduced by 2.3%. SEM images show the homogeneity of the formed PVA and carbon nanofibers in one web, with stretched CNFs after the electrospinning process. The formed nanocomposite can be used in wide variety of applications including nanoelectronics and gas adsorption.

  14. Superresolution measurement of nanofiber diameter by modes beating

    Science.gov (United States)

    Fenton, E. F.; Solano, P.; Hoffman, J. E.; Orozco, L. A.; Rolston, S. L.; Fatemi, F. K.

    2016-05-01

    Nanofibers are becoming an important tool in quantum information technologies for coupling photonics systems to atomic systems. Nondestructive techniques for characterizing these nanofibers prior to integration into an apparatus are desirable. In this work, we probe the light propagating in a fused silica optical nanofiber (750-nm-diameter) by coupling it evanescently to a 6- μm-diameter microfiber that is scanned along the nanofiber length. This technique is capable of observing all possible beat lengths among different propagating modes. The beat lengths are strongly dependent on the nanofiber diameter and refractive index of the fiber. The steep dependence has enabled measurements of the fiber diameter with sub-Angstrom sensitivity. The diameter extracted from the beat length measurements agrees with a measurement made using scanning electron microscopy. Work supported by NSF.

  15. Complex film of chitosan and carboxymethyl cellulose nanofibers.

    Science.gov (United States)

    Kawasaki, Takuma; Nakaji-Hirabayashi, Tadashi; Masuyama, Kazuhira; Fujita, Satoshi; Kitano, Hiromi

    2016-03-01

    A polymer film composed of a mixture of chitosan (Ch) and carboxymethyl cellulose sodium salt (CMC) nanofibers was deposited on a glass surface. The thin film of the Ch-CMC mixture obtained was stable, and fibroblast adhesion to the film was lowest when the weight ratio of Ch to CMC was 4:6. The ζ-potential and contact angle of the mixture film indicated that a polyion complex of Ch and CMC was formed. The mechanical strength of the film composed of Ch-CMC nanofiber complexes was much higher than that of the film composed of Ch-water-soluble CMC complexes (non-nanofiber), likely because the entanglement of nanofibers was enhanced by electrostatic attractions. These results indicate that the charge-neutralized nanofiber film was highly effective in suppressing cell adhesion and therefore is a promising material for biomedical applications.

  16. Honeycomb-like nanofiber based triboelectric nanogenerator using self-assembled electrospun poly(vinylidene fluoride-co-trifluoroethylene) nanofibers

    Science.gov (United States)

    Jang, Shin; Kim, Hyounjin; Kim, Yeongjun; Kang, Byung Ju; Oh, Je Hoon

    2016-04-01

    In this study, a honeycomb-like nanofiber based triboelectric nanogenerator (HN-TENG) is presented. In order to fabricate the honeycomb-like nanofiber, we utilized self-assembly of electrospun poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) nanofibers. The honeycomb-like P(VDF-TrFE) nanofiber network was directly produced via electrospinning without any additional processing. The HN-TENG showed a maximum voltage, current, and power density of 160 V, 17 μA, and 1.6 W/m2, respectively. The power density was enhanced more than twofold as compared with a typical flat nanofiber network based TENG due to the large surface area and high surface roughness of the honeycomb structure. Finally, we verified that HN-TENG has the potential to be used for practical applications by driving 100 light emitting diodes and charging capacitors.

  17. Process optimization and empirical modeling for electrospun polyacrylonitrile (PAN) nanofiber precursor of carbon nanofibers

    NARCIS (Netherlands)

    Gu, S.Y.; Ren, J.; Vancso, G.J.

    2005-01-01

    Ultrafine fibers were spun from polyacrylonitrile (PAN)/N,N-dimethyl formamide (DMF) solution as a precursor of carbon nanofibers using a homemade electrospinning set-up. Fibers with diameter ranging from 200 nm to 1200 nm were obtained. Morphology of fibers and distribution of fiber diameter were i

  18. The future of bioactive ceramics.

    Science.gov (United States)

    Hench, Larry L

    2015-02-01

    Two important worldwide needs must be satisfied in the future; (1) treatment of the deteriorating health of an aging population and, (2) decreasing healthcare costs to meet the needs of an increased population. The ethical and economic dilemma is how to achieve equality in quality of care while at the same time decreasing cost of care for an ever-expanding number of people. The limited lifetime of prosthetic devices made from first-generation nearly inert biomaterials requires new approaches to meet these two large needs. This paper advises an expanded emphasis on: (1) regeneration of tissues and (2) prevention of tissue deterioration to meet this growing need. Innovative use of bioactive ceramics with genetic control of in situ tissue responses offers the potential to achieve both tissue regeneration and prevention. Clinical success of use of bioactive glass for bone regeneration is evidence that this concept works. Likewise the use of micron sized bioactive glass powders in a dentifrice for re-mineralization of teeth provides evidence that prevention of tissue deterioration is also possible. This opinion paper outlines clinical needs that could be met by innovative use of bioactive glasses and ceramics in the near future; including: regeneration of skeletal tissues that is patient specific and genetic based, load-bearing bioactive glass-ceramics for skeletal and ligament and tendon repair, repair and regeneration of soft tissues, and rapid low-cost analysis of human cell-biomaterial interactions leading to patient specific diagnoses and treatments using molecularly tailored bioceramics.

  19. Synthesis and in vitro bioactivity of mesoporous bioactive glass scaffolds

    Energy Technology Data Exchange (ETDEWEB)

    Shih, C.J., E-mail: cjshih@kmu.edu.tw [Department of Fragrance and Cosmetic Science, College of Pharmacy, Kaohsiung Medical University, Kaohsiung 807, Taiwan (China); Chen, H.T. [Department of Fragrance and Cosmetic Science, College of Pharmacy, Kaohsiung Medical University, Kaohsiung 807, Taiwan (China); Huang, L.F. [School of Pharmacy, College of Pharmacy, Kaohsiung Medical University, Kaohsiung 807, Taiwan (China); Lu, P.S.; Chang, H.F. [Department of Fragrance and Cosmetic Science, College of Pharmacy, Kaohsiung Medical University, Kaohsiung 807, Taiwan (China); Chang, I.L., E-mail: 84004@cch.org.tw [Department of Orthopaedic Surgery, Chang-Hua Christian Hospital, Changhua 500, Taiwan (China)

    2010-06-15

    The main objective of the present study was to determine the effect of thermal treatment procedures (calcination temperature, heating rate and duration time) on the synthesis of SiO{sub 2}-CaO-P{sub 2}O{sub 5} mesoporous bioactive glass scaffolds. This is accomplished by thermogravimetric analyses, Fourier transform infrared (FTIR) absorption spectra, X-ray diffraction (XRD) and by analysis of nitrogen adsorption/desorption isotherms. In vitro bioactivity can also be assessed by the cytotoxic effect of the glasses on the NIH-3T3 cell line, and by characterization of MC-3T3-E1 cell attachment.

  20. Bioactivity of Minor Milk Components

    DEFF Research Database (Denmark)

    Nguyen, Duc Ninh

    . In particular, 3-15% of very low birth weight preterm infants suffer from the most servere form of intestinal inflammation, known as necrotizing enterocolitis (NEC). This disease is incurable with a high mortality rate of 15-30%. Mother’s breast milk consists of different bioactive constituents...... several steps of thermal processing, which are known to decrease/abolish bioactivity of milk constituents. This may explain for high NEC incidence in formula-fed preterm infants. We therefore in this PhD project investigated whether gentle thermal processing conditions increase the bioavailability...... of infant formula. Thereafter, bioactive milk components which were preserved in gently-processed infant formula were selected for further investigation of their immunomodulatory activity in cell and preterm pig models. We hope this project will contribute to the research on the development of new...

  1. Bioactivity of Minor Milk Components

    DEFF Research Database (Denmark)

    Nguyen, Duc Ninh

    . In particular, 3-15% of very low birth weight preterm infants suffer from the most servere form of intestinal inflammation, known as necrotizing enterocolitis (NEC). This disease is incurable with a high mortality rate of 15-30%. Mother’s breast milk consists of different bioactive constituents...... several steps of thermal processing, which are known to decrease/abolish bioactivity of milk constituents. This may explain for high NEC incidence in formula-fed preterm infants. We therefore in this PhD project investigated whether gentle thermal processing conditions increase the bioavailability...... of infant formula. Thereafter, bioactive milk components which were preserved in gently-processed infant formula were selected for further investigation of their immunomodulatory activity in cell and preterm pig models. We hope this project will contribute to the research on the development of new...

  2. Polysulfone nanofibers prepared by electrospinning and gas/jet-electrospinning

    Institute of Scientific and Technical Information of China (English)

    Yao Yongyi; Zhu Puxin; Ye Hai; Niu Anjian; Gao Xushan; Wu Dacheng

    2006-01-01

    Polysulfone nanofibers were prepared by electrospinning.The electrospinning equipment was designed in a new way,wherein the spinneret was combined with a gas jet device.The intrinsic viscosity of the used polysulfone was 0.197 dL/g in dimethyl acetamide,which was also the solvent in electrospinning.The gas used in this gas jet/electrostatic spinning was nitrogen.The relationship between the process parameters and the average diameter of polysulfone nanofibers was investigated.The main process parameters studied in this work were the voltage,the flow rate of the spinning fluid,the distance between the spinneret and the nanofiber collector and the temperature in the spinning chamber.The other important factors determining the nanometer diameter were the spinning fluid properties including its viscosity,surface tension and electrical conductivity.The average diameter and the diameter distribution of electrospinning nanofibers were measured experimentally by using scanning electron microscopy.The diameter of polysnlfone nanofibers prepared by the gas jet/electrostatic spinning was in the range 50-500 nm.It was found that the diameter of nanofibers mainly depended on high voltage,the gap between the spinneret and the collector and the concentration of polymer solutions.It is concluded that the gas-jet/electrospinning is a better method than the conventional electrospinning,in that it makes the nanofibers finer and more uniform and exhibits higher efficiency in the process of electrospinning.

  3. Development of Protective Clothing against Nanoparticle Based on Electrospun Nanofibers

    Directory of Open Access Journals (Sweden)

    M. Faccini

    2012-01-01

    Full Text Available In this paper, the development of efficient protective clothing against nanoparticulate aerosols is presented. Nanofibrous mats of polyamide 6 (PA6 were deposited onto a nonwoven viscose substrate by electrospinning technique. The influence of electrospinning parameters, including solution concentration, viscosity, and conductivity, was studied for the production of nonwovens with controlled fiber diameter showing a size distribution ranging from 66 to 195 nm. By varying several process parameters, textiles with different thickness of the nanofiber layer and thus air permeability were obtained. A hot-press lamination process using a thermoplastic resin as glue was applied to improve the adhesion of the nanofiber layer onto the textile support. After 1500 cycles of repeated compression and torsion, the nanofiber layer was still firmly attached to the support, while mechanical damage is visible in some areas. The penetration of NaCl particles with diameter ranging from 15 to 300 nm through the electrospun textiles was found to be strongly dependent on nanofiber layer thickness. A really thin nanofiber coating provides up to 80% retention of 20 nm size particles and over 50% retention of 200 nm size nanoparticles. Increasing the thickness of the nanofiber mat, the filtration efficiency was increased to over 99% along the whole nanoparticle range. The results obtained highlight the potential of nanofibers in the development of efficient personal protective equipments against nanoparticles.

  4. Nanofiber Anisotropic Conductive Films (ACF) for Ultra-Fine-Pitch Chip-on-Glass (COG) Interconnections

    Science.gov (United States)

    Lee, Sang-Hoon; Kim, Tae-Wan; Suk, Kyung-Lim; Paik, Kyung-Wook

    2015-11-01

    Nanofiber anisotropic conductive films (ACF) were invented, by adapting nanofiber technology to ACF materials, to overcome the limitations of ultra-fine-pitch interconnection packaging, i.e. shorts and open circuits as a result of the narrow space between bumps and electrodes. For nanofiber ACF, poly(vinylidene fluoride) (PVDF) and poly(butylene succinate) (PBS) polymers were used as nanofiber polymer materials. For PVDF and PBS nanofiber ACF, conductive particles of diameter 3.5 μm were incorporated into nanofibers by electrospinning. In ultra-fine-pitch chip-on-glass assembly, insulation was significantly improved by using nanofiber ACF, because nanofibers inside the ACF suppressed the mobility of conductive particles, preventing them from flowing out during the bonding process. Capture of conductive particles was increased from 31% (conventional ACF) to 65%, and stable electrical properties and reliability were achieved by use of nanofiber ACF.

  5. Chemistry on electrospun polymeric nanofibers: merely routine chemistry or a real challenge?

    Science.gov (United States)

    Agarwal, Seema; Wendorff, Joachim H; Greiner, Andreas

    2010-08-03

    Nanofiber-based non-wovens can be prepared by electrospinning. The chemical modification of such nanofibers or chemistry using nanofibers opens a multitude of application areas and challenges. A wealth of chemistry has been elaborated in recent years on and with electrospun nanofibers. Known methods as well as new methods have been applied to modify the electrospun nanofibers and thereby generate new materials and new functionalities. This Review summarizes and sorts the chemistry that has been reported in conjunction with electrospun nanofibers. The major focus is on catalysis and nanofibers, enzymes and nanofibers, surface modification for biomedical and specialty applications, coatings of fibers, crosslinking, and bulk modifications. A critical focus is on the question: what could make chemistry on or with nanofibers different from bulk chemistry?

  6. New High-Energy Nanofiber Anode Materials

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xiangwu; Fedkiw, Peter; Khan, Saad; Huang, Alex; Fan, Jiang

    2013-11-15

    The overall goal of the proposed work was to use electrospinning technology to integrate dissimilar materials (lithium alloy and carbon) into novel composite nanofiber anodes, which simultaneously had high energy density, reduced cost, and improved abuse tolerance. The nanofiber structure allowed the anodes to withstand repeated cycles of expansion and contraction. These composite nanofibers were electrospun into nonwoven fabrics with thickness of 50 μm or more, and then directly used as anodes in a lithium-ion battery. This eliminated the presence of non-active materials (e.g., conducting carbon black and polymer binder) and resulted in high energy and power densities. The nonwoven anode structure also provided a large electrode-electrolyte interface and, hence, high rate capacity and good lowtemperature performance capability. Following are detailed objectives for three proposed project periods. • During the first six months: Obtain anodes capable of initial specific capacities of 650 mAh/g and achieve ~50 full charge/discharge cycles in small laboratory scale cells (50 to 100 mAh) at the 1C rate with less than 20 percent capacity fade; • In the middle of project period: Assemble, cycle, and evaluate 18650 cells using proposed anode materials, and demonstrate practical and useful cycle life (750 cycles of ~70% state of charge swing with less than 20% capacity fade) in 18650 cells with at least twice improvement in the specific capacity than that of conventional graphite electrodes; • At the end of project period: Deliver 18650 cells containing proposed anode materials, and achieve specific capacities greater than 1200 mAh/g and cycle life longer than 5000 cycles of ~70% state of charge swing with less than 20% capacity fade.

  7. Novel dental composites reinforced with zirconia-silica ceramic nanofibers.

    Science.gov (United States)

    Guo, Guangqing; Fan, Yuwei; Zhang, Jian-Feng; Hagan, Joseph L; Xu, Xiaoming

    2012-04-01

    To fabricate and characterize dental composites reinforced with various amounts of zirconia-silica (ZS) or zirconia-yttria-silica (ZYS) ceramic nanofibers. Control composites (70 wt% glass particle filler, no nanofibers) and experimental composites (2.5, 5.0, and 7.5 wt% ZS or ZYS nanofibers replacing glass particle filler) were prepared by blending 29 wt% dental resin monomers, 70 wt% filler, and 1.0 wt% initiator, and polymerized by either heat or dental curing light. Flexural strength (FS), flexural modulus (FM), energy at break (EAB), and fracture toughness (FT) were tested after the specimens were stored in 37°C deionized water for 24h, 3 months, or 6 months. Degree of conversion (DC) of monomers in composites was measured using Fourier transformed near-infrared (FT-NIR) spectroscopy. Fractured surfaces were observed by field-emission scanning electron microscope (FE-SEM). The data were analyzed using ANOVA with Tukey's Honestly Significant Differences test used for post hoc analysis. Reinforcement of dental composites with ZS or ZYS nanofibers (2.5% or 5.0%) can significantly increase the FS, FM and EAB of dental composites over the control. Further increase the content of ZS nanofiber (7.5%), however, decreases these properties (although they are still higher than those of the control). Addition of nanofibers did not decrease the long-term mechanical properties of these composites. All ZS reinforced composites (containing 2.5%, 5.0% and 7.5% ZS nanofibers) exhibit significantly higher fracture toughness than the control. The DC of the composites decreases with ZS nanofiber content. Incorporation of ceramic nanofibers in dental composites can significantly improve their mechanical properties and fracture toughness and thus may extend their service life. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  8. Permeability of Electrospun Superhydrophobic Nanofiber Mats

    Directory of Open Access Journals (Sweden)

    Sarfaraz U. Patel

    2012-01-01

    Full Text Available This paper discusses the fabrication and characterization of electrospun nanofiber mats made up of poly(4-methyl-1-pentene polymer. The polymer was electrospun in different weight concentrations. The mats were characterized by their basis weight, fiber diameter distribution, contact angles, contact angle hysteresis, and air permeability. All of the electrospun nonwoven fiber mats had water contact angles greater than 150 degrees making them superhydrophobic. The permeabilities of the mats were empirically fitted to the mat basis weight by a linear relation. The experimentally measured air permeabilities were significantly larger than the permeabilities predicted by the Kuwabara model for fibrous media.

  9. Charge Injection and Transport in Organic Nanofibers

    DEFF Research Database (Denmark)

    Kjelstrup-Hansen, Jakob; Bøggild, Peter; Rubahn, H. G.

    2007-01-01

    We investigate the carrier injection and transport in individual para-hexaphenylene nanofibers by electrical transport measurements at different temperatures. The injected current shows much weaker temperature dependence than what would be anticipated from a simplistic model that considers...... the injection barrier height equal to the difference between the metal electrode work function and the HOMO energy level of the organic semiconductor. Semiquantitative modeling suggests that the weak temperature dependence is due to injection into a distribution of states rather than into a single energy level...

  10. Highly stretchable electrospun conducting polymer nanofibers

    Science.gov (United States)

    Boubée de Gramont, Fanny; Zhang, Shiming; Tomasello, Gaia; Kumar, Prajwal; Sarkissian, Andranik; Cicoira, Fabio

    2017-08-01

    Biomedical electronics research targets both wearable and biocompatible electronic devices easily adaptable to specific functions. To achieve such goals, stretchable organic electronic materials are some of the most intriguing candidates. Herein, we develop highly stretchable poly-(3,4-ethylenedioxythiphene) (PEDOT) doped with tosylate (PEDOT:Tos) nanofibers. A two-step process involving electrospinning of a carrier polymer (with oxidant) and vapor phase polymerization was used to produce fibers on a polydimethylsiloxane substrate. The fibers can be stretched up to 140% of the initial length maintaining high conductivity.

  11. Preparation and bioactivity of sol-gel macroporous bioactive glass

    Institute of Scientific and Technical Information of China (English)

    Zhihua Zhou; Jianming Ruan; Jianpeng Zou; Zhongcheng Zhou

    2008-01-01

    Bioactive glass is well known for its ability of bone regeneration, and sol-gel bioactive glass has many advantages com-pared with melt-derived bioactive glass. 3-D scaffold prepared by the sol-gel method is a promising substrate material for bone tissue engineering and large-scale bone repair. Porous sol-gel glass in the CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by the addition of stearic acid as a pore former. The diameter of the pore created by the pore former varied from 100 to 300μm. The formation of a hydroxyapatite layer on the glass was analyzed by studying the surface of the porous glass by scanning elec-tron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Raman spectra after they had been immersed in simulated body fluid (SBF) for some time, and the porous glass shows good bioactivity.

  12. Safety Instructions

    CERN Multimedia

    2003-01-01

    Please note that the Safety Instructions N0 37 rev. 3 (IS 37 rev. 3) entitled ""LEVEL-3" SAFETY ALARMS AND ALARM SYSTEMS" Is available on the web at the following URL: http://edms.cern.ch/document/335802 Paper copies can also be obtained from the TIS divisional secretariat, e-mail: tis.secretariat@cern.ch TIS Secretariat

  13. Instructional Coaching

    Science.gov (United States)

    Knight, Jim

    2006-01-01

    The number of school districts using instructional coaches is growing at a staggering rate. Coaching is becoming popular, in part, because many educational leaders recognize the old form of professional development, built around traditional in-service sessions for teachers, simply does not affect student achievement. By offering support, feedback,…

  14. Performance evaluation of PAN nanofiber air filter fabricated by electrospinning

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Cheol; Kim, Tae Eun; Lee, Jung Koo; Ahn, Ji Woong; Park, Sung Ho; Kim, Hyung Man [Dept. of Electronic, Telecommunications, Mechanical and Automotive Engineering, Inje University, Kimhae (Korea, Republic of)

    2015-11-15

    Nanomaterials possess unique mechanical, physical, and chemical properties. They are small, and have an ultrahigh surface area, making them suitable for air filter applications. Electrospinning has been recognized as an efficient technique for fabricating polymer nanofibers. In order to determine the optimum manufacturing conditions, the effects of several electrospinning process parameters on the diameter, orientation, and distribution of polyacrylonitrile (PAN) nanofiber are analyzed. To improve interlaminar fracture toughness and suppress delamination in the form of laminated non-woven fibers by using a heat roller, the performances of filter efficiency and pressure drop achieved with PAN nanofiber air filter are evaluated experimentally.

  15. Enhanced thermal conductance of polymer composites through embeddingaligned carbon nanofibers

    Directory of Open Access Journals (Sweden)

    Dale K. Hensley

    2016-07-01

    Full Text Available The focus of this work is to find a more efficient method of enhancing the thermal conductance of polymer thin films. This work compares polymer thin films embedded with randomly oriented carbon nanotubes to those with vertically aligned carbon nanofibers. Thin films embedded with carbon nanofibers demonstrated a similar thermal conductance between 40–60 μm and a higher thermal conductance between 25–40 μm than films embedded with carbon nanotubes with similar volume fractions even though carbon nanotubes have a higher thermal conductivity than carbon nanofibers.

  16. Preparation and Electrochemical Properties of Silver Doped Hollow Carbon Nanofibers

    Directory of Open Access Journals (Sweden)

    LI Fu

    2016-11-01

    Full Text Available Silver doped PAN-based hollow carbon nanofibers were prepared combining co-electrospinning with in situ reduction technique subsequently heat treatment to improve the electrochemical performances of carbon based supercapacitor electrodes. The morphology, structure and electrochemical performances of the resulted nanofiber were studied. The results show that the silver nanoparticles can be doped on the surface of hollow carbon nanofibers and the addition of silver favors the improvement of the electrochemical performances, exhibiting the enhanced reversibility of electrode reaction and the capacitance and the reduced charge transfer impedance.

  17. Electrostatic Self-Assembly of Polysaccharides into Nanofibers

    DEFF Research Database (Denmark)

    Mendes, Ana Carina Loureiro; Strohmenger, Timm; Goycoolea, Francisco

    2017-01-01

    In this study, the anionic polysaccharide Xanthan gum (X) was mixed with positively charged Chitosan oligomers (ChO), and used as building blocks, to generate novel nanofibers by electrostatic self-assembly in aqueous conditions. Different concentrations, ionic strength and order of mixing of both...... components were tested and observed to affect the diameter, which ranged from 100 to 500 nm, and morphology of the self-assembled nanofibers. The release of diclofenac, as model drug, from self-assembled xanthan-chitosan nanofibers was demonstrated, suggesting that these nanostructures can be used...

  18. Hybrid electrospun chitosan-phospholipids nanofibers for transdermal drug delivery

    DEFF Research Database (Denmark)

    Mendes, Ana Carina Loureiro; Gorzelanny, Christian; Halter, Natalia

    2016-01-01

    Chitosan (Ch) polysaccharide was mixed with phospholipids (P) to generate electrospun hybrid nanofibers intended to be used as platforms for transdermal drug delivery. Ch/P nanofibers exibithed average diameters ranging from 248 +/- 94 nm to 600 +/- 201 nm, depending on the amount of phospholipids...... used. Fourier Transformed Infra-Red (FTIR) spectroscopy and Dynamic Light Scattering (DLS) data suggested the occurrence of electrostatic interactions between amine groups of chitosan with the phospholipid counterparts. The nanofibers were shown to be stable for at least 7 days in Phosphate Buffer...

  19. Facile aqueous-phase synthesis of copper sulfide nanofibers

    Science.gov (United States)

    Tang, Zengmin; Im, Sang Hyuk; Kim, Woo-Sik; Yu, Taekyung

    2017-07-01

    We report a facile aqueous-phase synthetic route to vine-like copper sulfide (CuS) nanofibers prepared by reacting elemental sulfur with Cu+-branched polyethyleneimine (BPEI) complex obtained by the reaction of Cu2+ with ascorbic acid in the presence of BPEI. By controlling the concentration of BPEI, we could easily control the morphology of CuS from nanofibers to hollow nanoparticles. We also found that concentration of BPEI and the presence of halide anion would play important roles in the formation of vine-like CuS nanofibers.

  20. Bioactive glasses potential biomaterials for future therapy

    CERN Document Server

    Kaur, Gurbinder

    2017-01-01

    This book describes the history, origin and basic characteristics of bioactive materials. It includes a chapter dedicated to hydroxyapatite mineral, its formation and its bioactive properties. The authors address how cytotoxicity is a determining step for bioactivity. Applications of bioactive materials in the contexts of tissue regeneration, bone regeneration and cancer therapy are also covered. Silicate, metallic and mesoporous glasses are described, as well as the challenges and future prospects of research in this field.

  1. Biodegradable drug-eluting nanofiber-enveloped implants for sustained release of high bactericidal concentrations of vancomycin and ceftazidime: in vitro and in vivo studies.

    Science.gov (United States)

    Hsu, Yung-Heng; Chen, Dave Wei-Chih; Tai, Chun-Der; Chou, Ying-Chao; Liu, Shih-Jung; Ueng, Steve Wen-Neng; Chan, Err-Cheng

    2014-01-01

    We developed biodegradable drug-eluting nanofiber-enveloped implants that provided sustained release of vancomycin and ceftazidime. To prepare the biodegradable nanofibrous membranes, poly(D,L)-lactide-co-glycolide and the antibiotics were first dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol. They were electrospun into biodegradable drug-eluting membranes, which were then enveloped on the surface of stainless plates. An elution method and a high-performance liquid chromatography assay were employed to characterize the in vivo and in vitro release rates of the antibiotics from the nanofiber-enveloped plates. The results showed that the biodegradable nanofiber-enveloped plates released high concentrations of vancomycin and ceftazidime (well above the minimum inhibitory concentration) for more than 3 and 8 weeks in vitro and in vivo, respectively. A bacterial inhibition test was carried out to determine the relative activity of the released antibiotics. The bioactivity ranged from 25% to 100%. In addition, the serum creatinine level remained within the normal range, suggesting that the high vancomycin concentration did not affect renal function. By adopting the electrospinning technique, we will be able to manufacture biodegradable drug-eluting implants for the long-term drug delivery of different antibiotics.

  2. Immunological Regulation by Bioactive Lipids.

    Science.gov (United States)

    Taketomi, Yoshitaka; Murakami, Makoto

    2017-01-01

     Mast cells originate from hematopoietic stem cells and undergo terminal maturation in the extravascular tissues, in which they are ultimately resident. Mast maturation, phenotype, and function are dictated by the local microenvironment, which has a significant influence on the ability of mast cells to recognize and respond to stimuli. Activation of mast cells can lead to the release of three distinct classes of mediators, including preformed mediators stored in secretory granules, newly transcribed cytokines and chemokines, and de novo-synthesized bioactive lipid mediators. It is currently recognized that bioactive lipids such as arachidonic acid metabolites (prostaglandins and leukotrienes) released from mast cells modulate innate and adaptive immune responses both directly and indirectly through communication with other microenvironmental immune cells or stroma cells. Moreover, mast cells express a variety of lipid receptors and, if activated by bioactive lipids such as arachidonic acid, ω3 fatty acids, lysophospholipids, and their metabolites, can alter the release and production of other mediators including histamine, cytokines, and chemokines, and thereby alter homeostatic or pathophysiological responses. This review focuses on newly identified functional aspects of bioactive lipids with regard to their immune regulation and functional outcomes in both homeostasis and allergic disease.

  3. Nanofiber-based all-optical switches

    CERN Document Server

    Kien, Fam Le

    2016-01-01

    We study all-optical switches operating on a single four-level atom with the $N$-type transition configuration in a two-mode nanofiber cavity with a significant length (on the order of $20$ mm) and a moderate finesse (on the order of 300) under the electromagnetically induced transparency (EIT) conditions. In our model, the gate and probe fields are the quantum nanofiber-cavity fields excited by weak classical light pulses, and the parameters of the $D_2$ line of atomic cesium are used. We examine two different switching schemes. The first scheme is based on the effect of the presence of a photon in the gate mode on the EIT of the probe mode. The second scheme is based on the use of EIT to store a photon of the gate mode in the population of an appropriate atomic level, which leads to the reduction of the transmission of the field in the probe mode. We investigate the dependencies of the switching contrast on various parameters, such as the cavity length, the mirror reflectivity, and the detunings and powers ...

  4. Shear adhesion strength of aligned electrospun nanofibers.

    Science.gov (United States)

    Najem, Johnny F; Wong, Shing-Chung; Ji, Guang

    2014-09-01

    Inspiration from nature such as insects' foot hairs motivates scientists to fabricate nanoscale cylindrical solids that allow tens of millions of contact points per unit area with material substrates. In this paper, we present a simple yet robust method for fabricating directionally sensitive shear adhesive laminates. By using aligned electrospun nylon-6, we create dry adhesives, as a succession of our previous work on measuring adhesion energies between two single free-standing electrospun polymer fibers in cross-cylinder geometry, randomly oriented membranes and substrate, and peel forces between aligned fibers and substrate. The synthetic aligned cylindrical solids in this study are electrically insulating and show a maximal Mode II shear adhesion strength of 27 N/cm(2) on a glass slide. This measured value, for the purpose of comparison, is 270% of that reported from gecko feet. The Mode II shear adhesion strength, based on a commonly known "dead-weight" test, is 97-fold greater than the Mode I (normal) adhesion strength of the same. The data indicate a strong shear binding on and easy normal lifting off. Anisotropic adhesion (Mode II/Mode I) is pronounced. The size and surface boundary effects, crystallinity, and bending stiffness of fibers are used to understand these electrospun nanofibers, which vastly differ from otherwise known adhesive technologies. The anisotropic strength distribution is attributed to a decreasing fiber diameter and an optimized laminate thickness, which, in turn, influences the bending stiffness and solid-state "wettability" of points of contact between nanofibers and surface asperities.

  5. Drop impacts on electrospun nanofiber membranes

    Science.gov (United States)

    Sahu, Rakesh P.; Sinha-Ray, Suman; Yarin, Alexander; Pourdeyhimi, Behnam

    2013-11-01

    This work reports a study of drop impacts of polar and non-polar liquids onto electrospun nanofiber membranes (of 8-10 mm thickness and pore sizes of 3-6 nm) with an increasing degree of hydrophobicity. The nanofibers used were electrospun from polyacrylonitrile (PAN), nylon 6/6, polycaprolactone (PCL) and Teflon. It was found that for any liquid/fiber pair there exists a threshold impact velocity (1.5 to 3 m/s) above which water penetrates membranes irrespective of their wettability. The low surface tension liquid left the rear side of sufficiently thin membranes as a millipede-like system of tiny jets protruding through a number of pores. For such a high surface tension liquid as water, jets immediately merged into a single bigger jet, which formed secondary drops due to capillary instability. An especially non-trivial result is that superhydrophobicity of the porous nano-textured Teflon skeleton with the interconnected pores is incapable of preventing water penetration due to drop impact, even at relatively low impact velocities close to 3.46 m/s. A theoretical estimate of the critical membrane thickness sufficient for complete viscous dissipation of the kinetic energy of penetrating liquid corroborates with the experimental data. The current work is supported by the Nonwovens Cooperative Research Center (NCRC).

  6. Engineering a growth factor embedded nanofiber matrix niche to promote vascularization for functional cardiac regeneration.

    Science.gov (United States)

    Lakshmanan, Rajesh; Kumaraswamy, Priyadharshini; Krishnan, Uma Maheswari; Sethuraman, Swaminathan

    2016-08-01

    The major loss of tissue extracellular matrix (ECM) after myocardial ischemia is a serious burden that gradually leads to heart failure. Due to lack of available treatment methods to restore the cardiac function, various research strategies have come up to treat the ischemic myocardium. However these have met with limited success due to the complexity of the cardiac tissue, which exhibits a nanofibrous collagenous matrix with spatio-temporal localization of a combination of growth factors. To mimic the topographical and chemical cues of the natural cardiac tissue, we have fabricated a growth factor embedded nanofibrous scaffold through electrospinning. In our previous work, we have reported a nanofibrous matrix made of PLCL and PEOz with an average diameter of 500 nm. The scaffold properties were specifically characterized in vitro for cardio-compatibility. In the present study, we have loaded dual growth factors VEGF and bFGF in the nanofiber matrix and investigated its suitability for cardiac tissue engineering. The encapsulation and release of dual growth factors from the matrix were studied using XPS and ELISA. Bioactivity of the loaded growth factors towards proliferation and migration of endothelial cells (HUVECs) was evaluated through MTS and Boyden chamber assays respectively. The efficiency of growth factors on the nanofibrous matrix to activate signaling molecules was studied in HUVECs through gene expression analysis. Preclinical evaluation of the growth factor embedded nanofibrous patch in a rabbit acute myocardial infarction (AMI) model was studied and cardiac function assessment was made through ECG and echocardiography. The evidence for angiogenesis in the patch secured regions was analyzed through histopathology and immunohistochemistry. Our results confirm the effectiveness of growth factor embedded nanofiber matrix in restoration of cardiac function after ischemia when compared to conventional patch material thereby exhibiting promise as a

  7. Tensile properties of bacterial cellulose nanofibers - polyester composites

    Science.gov (United States)

    Abral, H.; Mahardika, M.

    2016-07-01

    The paper shows tensile properties of bacterial cellulose (BC) nanofibers and polyester (PO) matrix composites. Tensile properties including tensile strength (TS), modulus elasticity (ME), and elongation (EL) were observed respectively. BC nanofibers exist in the form of a sheet that was then varied in matrix PO. The BC sheet was mounted by one, three, five and seven pieces respectively in the matrix PO. The tensile strength of the composites was conducted by using the tensile equipment. The results showed that the tensile strength of the composite with a single sheet of BC was lower than that of pure PO. The ST value achieved maximum level in the number of layers of BC three pieces, but then it decreased for the composites reinforced five and seven pieces of BC nanofiber, respectively. Scanning Electron Microscope (SEM) observation exhibits bad interface bonding between BC nanofibers and PO matrix.

  8. Oxygen-Generating Nanofiber Cell Scaffolds with Antimicrobial Properties

    NARCIS (Netherlands)

    Wang, Junping; Zhu, Yizhou; Bawa, Harinder K.; Ng, Geoffrey; Wu, Yong; Libera, Matthew; van der Mei, H. C.; Busscher, H. J.; Yu, Xiaojun

    2011-01-01

    Many next-generation biomaterials will need ability to not only promote healthy tissue integration but to simultaneously resist bacterial colonization resulting biomaterials associated infection. For this purpose, antimicrobial nanofibers of (polycapro-lactone(PCL) were fabricated by incorporating c

  9. Method of synthesizing silica nanofibers using sound waves

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Jaswinder K.; Datskos, Panos G.

    2015-09-15

    A method for synthesizing silica nanofibers using sound waves is provided. The method includes providing a solution of polyvinyl pyrrolidone, adding sodium citrate and ammonium hydroxide to form a first mixture, adding a silica-based compound to the solution to form a second mixture, and sonicating the second mixture to synthesize a plurality of silica nanofibers having an average cross-sectional diameter of less than 70 nm and having a length on the order of at least several hundred microns. The method can be performed without heating or electrospinning, and instead includes less energy intensive strategies that can be scaled up to an industrial scale. The resulting nanofibers can achieve a decreased mean diameter over conventional fibers. The decreased diameter generally increases the tensile strength of the silica nanofibers, as defects and contaminations decrease with the decreasing diameter.

  10. Multicolored Nanofiber Based Organic Light-Emitting Transistor

    DEFF Research Database (Denmark)

    With Jensen, Per Baunegaard; Kjelstrup-Hansen, Jakob; Tavares, Luciana

    For optoelectronic applications, organic semiconductors have several advantages over their inorganic counterparts such as facile synthesis, tunability via synthetic chemistry, and low temperature processing. Self-assembled, molecular crystalline nanofibers are of particular interest as they could...... form ultra-small light-emitters in future nanophotonic applications. Such organic nanofibers exhibit many interesting optical properties including polarized photo- and electroluminescence, waveguiding, and emission color tunability. We here present a first step towards a multicolored, electrically...... driven device by combining nanofibers made from two different molecules, parahexaphenylene (p6P) and 5,5´-Di-4-biphenyl-2,2´-bithiophene (PPTTPP), which emits blue and green light, respectively. The organic nanofibers are implemented on a bottom gate/bottom contact field-effect transistor platform using...

  11. Preparation and Characterization of Organic/Inorganic Hybrid Nanofibers

    Institute of Scientific and Technical Information of China (English)

    WU Ning; WEI Qu-fu; LI Qi; XU Wen-zheng

    2006-01-01

    A new class of nanocomposites based on organic and inorganic species integrated at a nanoscale has obtained more attention these years. Organic-inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance. In this work, PVAc/TiO2 organicinorganic hybrid was prepared by sol-gel process. Electrospinning technique was used to fabricate PVAc/TiO2hybrid nanofibers. The structures and properties of the hybrid nanofibers were characterized by Scanning Electron Microscopy (SEM), Atomic Force Microscope (AFM),Differential Scanning Calorimeter (DSC) and Fouriertransform infrared (FTIR) spectra. SEM and AFM were employed to study the topography of the hybrid nanofibers.The chemical structure of the hybrid nanofibers were examined by FTIR. The DSC scansrevealed the second order transition temperature of the hybrid materials were higher than PVAc.

  12. Multicolored Nanofiber Based Organic Light-Emitting Transistor

    DEFF Research Database (Denmark)

    With Jensen, Per Baunegaard; Kjelstrup-Hansen, Jakob; Tavares, Luciana

    For optoelectronic applications, organic semiconductors have several advantages over their inorganic counterparts such as facile synthesis, tunability via synthetic chemistry, and low temperature processing. Self-assembled, molecular crystalline nanofibers are of particular interest as they could...... form ultra-small light-emitters in future nanophotonic applications. Such organic nanofibers exhibit many interesting optical properties including polarized photo- and electroluminescence, waveguiding, and emission color tunability. We here present a first step towards a multicolored, electrically...... driven device by combining nanofibers made from two different molecules, parahexaphenylene (p6P) and 5,5´-Di-4-biphenyl-2,2´-bithiophene (PPTTPP), which emits blue and green light, respectively. The organic nanofibers are implemented on a bottom gate/bottom contact field-effect transistor platform using...

  13. Method of synthesizing silica nanofibers using sound waves

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Jaswinder K.; Datskos, Panos G.

    2017-08-08

    A method for synthesizing silica nanofibers using sound waves is provided. The method includes providing a solution of polyvinyl pyrrolidone, adding sodium citrate and ammonium hydroxide to form a first mixture, adding a silica-based compound to the solution to form a second mixture, and sonicating the second mixture to synthesize a plurality of silica nanofibers having an average cross-sectional diameter of less than 70 nm and having a length on the order of at least several hundred microns. The method can be performed without heating or electrospinning, and instead includes less energy intensive strategies that can be scaled up to an industrial scale. The resulting nanofibers can achieve a decreased mean diameter over conventional fibers. The decreased diameter generally increases the tensile strength of the silica nanofibers, as defects and contaminations decrease with the decreasing diameter.

  14. Method of synthesizing silica nanofibers using sound waves

    Science.gov (United States)

    Sharma, Jaswinder K.; Datskos, Panos G.

    2015-09-15

    A method for synthesizing silica nanofibers using sound waves is provided. The method includes providing a solution of polyvinyl pyrrolidone, adding sodium citrate and ammonium hydroxide to form a first mixture, adding a silica-based compound to the solution to form a second mixture, and sonicating the second mixture to synthesize a plurality of silica nanofibers having an average cross-sectional diameter of less than 70 nm and having a length on the order of at least several hundred microns. The method can be performed without heating or electrospinning, and instead includes less energy intensive strategies that can be scaled up to an industrial scale. The resulting nanofibers can achieve a decreased mean diameter over conventional fibers. The decreased diameter generally increases the tensile strength of the silica nanofibers, as defects and contaminations decrease with the decreasing diameter.

  15. Research on morphologies of polyvinyl alcohol/milk nanofibers

    Directory of Open Access Journals (Sweden)

    Zhang Yan

    2016-01-01

    Full Text Available In this paper, the surface morphologies of polyvinyl alcohol/milk nanofibers produced via electrospinning technique were investigated. The electrospinning process was performed at various processing parameters (flow rate, applied voltage and different polyvinyl acetate to milk ratios (100/0, 90/10, 80/20, 70/30, and 60/40. The scanning electron microscopy and Image J software were used to characterize the surface morphologies, especially the diameter distribution of electro spun nanofibers. The results of scanning electron microscopy show that the diameter of polyvinyl acetate/milk nanofibers increases with the increase of the spinning speed and spinning voltage but decreases with the increase of the weight percentage of milk in the spinning solution. The potential applications of this bicomponent nanofibers are numerous and diverse. The research results in present paper can contribute to better control of the electrospinning process and thus expanding the applicabilities, such as dressings for wound healing in sports.

  16. Silicon Whisker and Carbon Nanofiber Composite Anode Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. (PSI) proposes to develop a silicon whisker and carbon nanofiber composite anode for lithium ion batteries on a Phase I program. This anode...

  17. Polyethylene/silver-nanofiber composites: A material for antibacterial films.

    Science.gov (United States)

    Zapata, Paula A; Larrea, Maialen; Tamayo, Laura; Rabagliati, Franco M; Azócar, M Ignacio; Páez, Maritza

    2016-12-01

    Silver nanofibers (Ag-Nfbs)~80nm in diameter were synthesized by hydrothermal treatment. The nanofibers (3 and 5wt%) were added in the initial feed together with the catalytic system. Polymerizations in an ethylene atmosphere were performed, yielding PE nanocomposites in situ with 3 and 5wt% content of Ag-Nfbs. The antibacterial effect of the silver-nanofiber composites was evaluated after incubation of Escherichia coli ATCC 25923 for 8h on their surface. Bacterial viability tests showed that the silver-nanofiber composites inhibited the growth of Escherichia coli ATCC 25923 by 88 and 56%. This behavior is attributed to increased silver ions release from the nanocomposite. TEM analysis showed that the antibacterial effect is associated with membrane disruption but not with changes in shape.

  18. Improved fire retardancy of thermoset composites modified with carbon nanofibers

    Directory of Open Access Journals (Sweden)

    Zhongfu Zhao and Jan Gou

    2009-01-01

    Full Text Available Multifunctional thermoset composites were made from polyester resin, glass fiber mats and carbon nanofiber sheets (CNS. Their flaming behavior was investigated with cone calorimeter under well-controlled combustion conditions. The heat release rate was lowered by pre-planting carbon nanofiber sheets on the sample surface with the total fiber content of only 0.38 wt.%. Electron microscopy showed that carbon nanofiber sheet was partly burned and charred materials were formed on the combusting surface. Both the nanofibers and charred materials acted as an excellent insulator and/or mass transport barrier, improving the fire retardancy of the composite. This behavior agrees well with the general mechanism of fire retardancy in various nanoparticle-thermoplastic composites.

  19. Nanofiber-based optical trapping of cold neutral atoms

    CERN Document Server

    Vetsch, Eugen; Mitsch, Rudolf; Reitz, Daniel; Schneeweiss, Philipp; Rauschenbeutel, Arno

    2012-01-01

    We present experimental techniques and results related to the optimization and characterization of our nanofiber-based atom trap [Vetsch et al., Phys. Rev. Lett. 104, 203603 (2010)]. The atoms are confined in an optical lattice which is created using a two-color evanescent field surrounding the optical nanofiber. For this purpose, the polarization state of the trapping light fields has to be properly adjusted. We demonstrate that this can be accomplished by analyzing the light scattered by the nanofiber. Furthermore, we show that loading the nanofiber trap from a magneto-optical trap leads to sub-Doppler temperatures of the trapped atomic ensemble and yields a sub-Poissonian distribution of the number of trapped atoms per trapping site.

  20. A review of opportunities for electrospun nanofibers in analytical chemistry.

    Science.gov (United States)

    Chigome, Samuel; Torto, Nelson

    2011-11-07

    Challenges associated with analyte and matrix complexities and the ever increasing pressure from all sectors of industry for alternative analytical devices, have necessitated the development and application of new materials in analytical chemistry. To date, nanomaterials have emerged as having excellent properties for analytical chemistry applications mainly due to their large surface area to volume ratio and the availability of a wide variety of chemical and morphological modification methods. Of the available nanofibrous material fabrication methods, electrospinning has emerged as the most versatile. It is the aim of this contribution to highlight some of the recent developments that harness the great potential shown by electrospun nanofibers for application in analytical chemistry. The review discusses the use of electrospun nanofibers as a platform for low resolution separation or as a chromatographic sorbent bed for high resolution separation. It concludes by discussing the applications of electrospun nanofibers in detection systems with a specific focus on the development of simple electrospun nanofiber based colorimetric probes.

  1. Mechanical properties of homogeneous nanofiber composites fabricated by electrospinning

    Science.gov (United States)

    Watanabe, Kentaro; Hotta, Atsushi

    2013-03-01

    A new composite that possesses uniformly dispersed polymeric nanofibers in different polymeric matrix was introduced by using electrospinning. Recently, nanofibers have been actively investigated for fillers for polymeric nano-composites to enhance the mechanical properties of the composites or to get highly functionalize polymer materials. Polyvinyl alcohol (PVA) nanofibers were selected as polymeric fillers and polydimethylsiloxane (PDMS) was used for polymeric matrix. Internally well-dispersed composites were fabricated by this new method, whereas rather anisotropic composites were also made by the traditional sandwich method. The morphology of the composites was analyzed by field emission scanning electron microscopy (FE-SEM). It was found that, in the new internally well-dispersed composites, PVA nanofibers existed from the both surfaces of the polymer matrix, uniformly dispersed in the composite. Isotropic mechanical properties were observed for internally well-dispersed composites, whereas relatively anisotropic characteristics could be observed for the traditionally-made composites.

  2. Silicon Whisker and Carbon Nanofiber Composite Anode Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. (PSI) has successfully developed a silicon whisker and carbon nanofiber composite anode for lithium ion batteries on a Phase I program. PSI...

  3. Dispersion of cellulose nanofibers in biopolymer based nanocomposites

    Science.gov (United States)

    Wang, Bei

    The focus of this work was to understand the fundamental dispersion mechanism of cellulose based nanofibers in bionanocomposites. The cellulose nanofibers were extracted from soybean pod and hemp fibers by chemo-mechanical treatments. These are bundles of cellulose nanofibers with a diameter ranging between 50 to 100 nm and lengths of thousands of nanometers which results in very high aspect ratio. In combination with a suitable matrix polymer, cellulose nanofiber networks show considerable potential as an effective reinforcement for high quality specialty applications of bio-based nanocomposites. Cellulose fibrils have a high density of --OH groups on the surface, which have a tendency to form hydrogen bonds with adjacent fibrils, reducing interaction with the surrounding matrix. The use of nanofibers has been mostly restricted to water soluble polymers. This thesis is focused on synthesizing the nanocomposite using a solid phase matrix polypropylene (PP) or polyethylene (PE) by hot compression and poly (vinyl alcohol) (PVA) in an aqueous phase by film casting. The mechanical properties of nanofiber reinforced PVA film demonstrated a 4-5 fold increase in tensile strength, as compared to the untreated fiber-blend-PVA film. It is necessary to reduce the entanglement of the fibrils and improve their dispersion in the matrix by surface modification of fibers without deteriorating their reinforcing capability. Inverse gas chromatography (IGC) was used to explore how various surface treatments would change the dispersion component of surface energy and acid-base character of cellulose nanofibers and the effect of the incorporation of these modified nanofibers into a biopolymer matrix on the properties of their nano-composites. Poly (lactic acid) (PLA) and polyhydroxybutyrate (PHB) based nanocomposites using cellulose nanofibers were prepared by extrusion, injection molding and hot compression. The IGC results indicated that styrene maleic anhydride coated and ethylene

  4. Smart nanofibers with a photoresponsive surface for controlled release.

    Science.gov (United States)

    Fu, Guo-Dong; Xu, Li-Qun; Yao, Fang; Li, Guo-Liang; Kang, En-Tang

    2009-11-01

    A novel photocontrolled "ON-OFF" release system for the alpha-cyclodextrin-5-fluorouracial (alpha-CD-5FU) prodrug, based on host-guest interaction on the photoresponsive and cross-linked nanofiber surface, was demonstrated. The nanofibers with a stimuli-responsive surface were electrospun from the block copolymer prepared via controlled radical polymerization, followed by surface modification via "Click Chemistry", and loading of the prodrug via host-guest interaction.

  5. High temperature resistant nanofiber by bubbfil-spinning

    Directory of Open Access Journals (Sweden)

    Li Ya

    2015-01-01

    Full Text Available Heat-resisting nanofibers have many potential applications in various industries, and the bubbfil spinning is the best candidate for mass-production of such materials. Polyether sulfone/zirconia solution with a bi-solvent system is used in the experiment. Experimental result reveals that polyether sulfone/zirconia nanofibers have higher resistance to high temperature than pure polyether sulfone fibers, and can be used as high-temperature-resistant filtration materials.

  6. Enhancement of radiative processes in nanofibers with embedded plasmonic nanoparticles

    CERN Document Server

    Jurga, Radoslaw; Pisignano, Dario; Ciracì, Cristian

    2016-01-01

    Efficient manipulation and long distance transport of single-photons is a key component in nanoscale quantum optics. In this letter, we study the emission properties of an individual light emitter placed into a nanofiber and coupled to a metallic nanoparticle. We find that plasmonic field enhancement together with the nanofiber optical confinement uniquely and synergistically contribute to an overall increase of emission rates as well as quantum yields.

  7. Preparation of nanofibers consisting of MnO/Mn3O4 by using the electrospinning technique: the nanofibers have two band-gap energies

    Science.gov (United States)

    Barakat, Nasser A. M.; Woo, Kee-Do; Ansari, S. G.; Ko, Jung-Ahn; Kanjwal, Muzafar A.; Kim, Hak Yong

    2009-06-01

    In the present study, nanofibers consisting of manganese monoxide (MnO), which is hard to prepare because of the chemical activity of the manganese metal, and the popular Mn3O4 have been synthesized via the electrospinning technique. The nanofibers were obtained by electrospinning of an aqueous sol-gel consisting of manganese acetate tetra-hydrate and poly(vinyl alcohol). The obtained nanofiber mats were dried in vacuum at 80°C for 24 h and then calcined in argon atmosphere at 900°C for 5 h. According to X-ray diffraction results, the obtained nanofibers contain 65% MnO. Transmission electron microscope analysis reveals good crystallinity of the produced nanofibers. UV-visible spectroscopic analysis has indicated that the produced nanofibers have two band-gap energies, 2 and 3.7 eV, which enhances utilizing of the nanofibers in different applications.

  8. Poly (lactide-co-glycolide nanofibers coated with collagen and nano-hydroxyapatite for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Reza Tavakoli-Darestani

    2013-05-01

    Full Text Available Please cite this article as: Tavakoli-Darestani R, Kazemian GH, Emami M, Kamrani-Rad A. Poly (lactide-co-glycolide nanofibers coated with collagen and nano-hydroxyapatite for bone tissue engineering. Novel Biomed 2013;1:8-15.Background: A combination of polymeric nanofibrous scaffold and bioactive materials is potentially useful in bone regeneration applications.Materials and Methods: In the present study, Poly (lactide-co-glycolide (PLGA nanofibrous scaffolds, fabricated via electrospinning, were initially coated with Type I collagen and then with nano-hydroxyapatite. The prepared scaffolds were then characterized using SEM and their ability for bone regeneration was investigated in a rat critical size bone defect using digital mammography, multislice spiral-computed tomography (MSCT imaging, and histological analysis.Results: Electrospun scaffolds had nanofibrous structure with homogenous distribution of n-HA on collagen-grafted PLGA. After 8 weeks of implantation, no sign of inflammation or complication was observed at the site of surgery. According to digital mammography and MSCT, PLGA nanofibers coated simultaneously with collagen and HA showed the highest regeneration in rat calvarium. In addition, no significant difference was observed in bone repair in the group which received PLGA and the untreated control. This amount was lower than that observed in the group implanted with collagen-coated PLGA. Histological studies confirmed these data and showed osteointegration to the surrounding tissue.Conclusion: Taking all together, it was demonstrated that nanofibrous structures can be used as appropriate support for tissue-engineered scaffolds, and coating them with bioactive materials will provide ideal synthetic grafts. Fabricated PLGA coated with Type I collagen and HA can be used as new bone graft substitutes in orthopaedic surgery and is capable of enhancing bone regeneration via characteristics such as osteoconductivity and

  9. Single flexible nanofiber to simultaneously realize electricity-magnetism bifunctionality

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ming; Sheng, Shujuan; Ma, Qianli; Lv, Nan; Yu, Wensheng; Wang, Jinxian; Dong, Xiangting; Liu, Guixia, E-mail: wenshengyu2009@sina.com, E-mail: dongxiangting888@163.com [Key Laboratory of Applied Chemistry and Nanotechnology at Universities of Jilin Province, Changchun University of Science and Technology, Changchun (China)

    2016-03-15

    In order to develop new-typed multifunctional composite nanofibers, PANI/Fe{sub 3}O{sub 4}/PVP flexible bifunctional composite nanofibers with simultaneous electrical conduction and magnetism have been successfully fabricated via a facile electrospinning technology. Polyvinyl pyrrolidone (PVP) is used as a matrix to construct composite nanofibers containing different amounts of polyaniline (PANI) and Fe{sub 3}O{sub 4} nanoparticles (NPs). The bifunctional composite nanofibers simultaneously possess excellent electrical conductivity and magnetic properties. The electrical conductivity reaches up to the order of 10{sup -3} S·cm{sup -1}. The electrical conductivity and saturation magnetization of the composite nanofibers can be respectively tuned by adding various amounts of PANI and Fe{sub 3}O{sub 4} NPs. The obtained electricity-magnetism bifunctional composite nanofibers are expected to possess many potential applications in areas such as electromagnetic interference shielding, special coating, microwave absorption, molecular electronics and future nanomechanics. More importantly, the design concept and construct technique are of universal significance to fabricate other bifunctional one-dimensional nanostructures. (author)

  10. Cellulose nanofiber extraction from grass by a modified kitchen blender

    Science.gov (United States)

    Nakagaito, Antonio Norio; Ikenaga, Koh; Takagi, Hitoshi

    2015-03-01

    Cellulose nanofibers have been used to reinforce polymers, delivering composites with strength that in some cases can be superior to that of engineering plastics. The extraction of nanofibers from plant fibers can be achieved through specialized equipment that demands high energy input, despite delivering extremely low yields. The high extraction cost confines the use of cellulose nanofibers to the laboratory and not for industrial applications. This study aims to extract nanofibers from grass by using a kitchen blender. Earlier studies have demonstrated that paper sheets made of blender-extracted nanofibers (after 5 min to 10 min of blending) have strengths on par with paper sheets made from commercially available cellulose nanofibers. By optimizing the design of the blender bottle, nanofibrillation can be achieved in shorter treatment times, reducing the energy consumption (in the present case, to half) and the overall extraction cost. The raw materials used can be extended to the residue straw of agricultural crops, as an alternative to the usual pulp fibers obtained from wood.

  11. Preparation and biomedical applications of chitin and chitosan nanofibers.

    Science.gov (United States)

    Azuma, Kazuo; Ifuku, Shinsuke; Osaki, Tomohiro; Okamoto, Yoshiharu; Minami, Saburo

    2014-10-01

    Chitin (β-(1-4)-poly-N-acetyl-D-glucosamine) is widely distributed in nature and is the second most abundant polysaccharide after cellulose. Chitin occurs in nature as ordered macrofibrils. It is the major structural component in the exoskeleton of crab and shrimp shells and the cell wall of fungi and yeast. As chitin is not readily dissolved in common solvents, it is often converted to its more deacetylated derivative, chitosan. Chitin, chitosan, and its derivatives are widely used in tissue engineering, wound healing, and as functional foods. Recently, easy methods for the preparation of chitin and chitosan nanofibers have been developed, and studies on biomedical applications of chitin and chitosan nanofibers are ongoing. Chitin and chitosan nanofibers are considered to have great potential for various biomedical applications, because they have several useful properties such as high specific surface area and high porosity. This review summarizes methods for the preparation of chitin and chitosan nanofibers. Further, biomedical applications of chitin and chitosan nanofibers in (i) tissue engineering, (ii) wound dressing, (iii) cosmetic and skin health, (iv) stem cell technology, (v) anti-cancer treatments and drug delivery, (vi) anti-inflammatory treatments, and (vii) obesity treatment are summarized. Many studies indicate that chitin and chitosan nanofibers are suitable materials for various biomedical applications.

  12. Effect of electrospun nanofibers on flexural properties of fiberglass composites

    Science.gov (United States)

    White, Fatima T.

    In the present study, sintered electrospun TEOS nanofibers were interleaved in S2 fiberglass woven fabric layers, and composite panels were fabricated using the heated vacuum assisted resin transfer molding (H-VARTM) process. Cured panels were water jet cut to obtain the flexural test coupons. Flexural coupons were then tested using ASTM D7264 standard. The mechanical properties such as flexural strength, ultimate flexural failure strains, flexural modulus, and fiber volume fraction were measured. The S-2 fiberglass composite with the sintered TEOS electrospun nanofibers displayed lower flexural stiffness and strength as compared to the composites that were fabricated using S-2 fiberglass composite without the TEOS electrospun nanofibers. The present study also indicated that the composites fabricated with sintered TEOS electrospun nanofibers have larger failure strains as compared to the ones that were fabricated without the presence of electrospun nanofibers. The study indicates that the nanoengineered composites have better energy absorbing mechanism under flexural loading as compared to conventional fiberglass composites without presence of nanofibers.

  13. Effect of Nanofibers on Spore Penetration and Lunar Dust Filtration

    Directory of Open Access Journals (Sweden)

    Phil Gibson, Ph.D.

    2008-06-01

    Full Text Available The results of two separate studies on biological spore penetration and simulated lunar dust filtration illustrate the use of nanofibers in some nonstandard filtration applications (nanofibers are generally defined as having diameters of less than a micron. In the first study, a variety of microporous liners containing microfibers and nanofibers were combined with cotton-based fabrics in order to filter aerosolized spores. The aerosol penetration resistance of the nanofiber-lined fabrics was measured, and some analysis was conducted of where the particles are captured within the fabric layers. Testing was conducted with aerosolized living spores, in order to evaluate the efficacy of various fabric treatments on spore viability within the fabric layers after exposure. Reported are the results of studies on fabrics with and without a removable electrospun nanofiber liner, and the fate of the spores within the fabric layers. In the second study, non-instrumented filtration testing using simulated lunar dust determined the comparative filtration efficiency of various nonwoven filtration media. Nanofiber witness media, combined with scanning electron microscope images, showed that an electrospun nonwoven filter layer effectively filtered out all the large and fine particles of the simulated lunar dust.

  14. Synthesis of Keratin-based Nanofiber for Biomedical Engineering.

    Science.gov (United States)

    Thompson, Zanshe S; Rijal, Nava P; Jarvis, David; Edwards, Angela; Bhattarai, Narayan

    2016-02-07

    Electrospinning, due to its versatility and potential for applications in various fields, is being frequently used to fabricate nanofibers. Production of these porous nanofibers is of great interest due to their unique physiochemical properties. Here we elaborate on the fabrication of keratin containing poly (ε-caprolactone) (PCL) nanofibers (i.e., PCL/keratin composite fiber). Water soluble keratin was first extracted from human hair and mixed with PCL in different ratios. The blended solution of PCL/keratin was transformed into nanofibrous membranes using a laboratory designed electrospinning set up. Fiber morphology and mechanical properties of the obtained nanofiber were observed and measured using scanning electron microscopy and tensile tester. Furthermore, degradability and chemical properties of the nanofiber were studied by FTIR. SEM images showed uniform surface morphology for PCL/keratin fibers of different compositions. These PCL/keratin fibers also showed excellent mechanical properties such as Young's modulus and failure point. Fibroblast cells were able to attach and proliferate thus proving good cell viability. Based on the characteristics discussed above, we can strongly argue that the blended nanofibers of natural and synthetic polymers can represent an excellent development of composite materials that can be used for different biomedical applications.

  15. Tuned Morphological Electrospun Hydroxyapatite Nanofibers via pH

    Institute of Scientific and Technical Information of China (English)

    Xiaofeng Song; Fengguang Ling; Haotian Li; Zhantuan Gao; Xuesi Chen

    2012-01-01

    The concept of biocompatible,osteoconductive and noninflammatory material mimicking the structure of natural bone has generated a considerable interest in recent decades.Hydroxyapatite (HA) is an important bionic material that is used for bone grafting in osseous defects and drug carriers.HA with various morphologies and surface properties have been widely investigated.In this paper,HA nanofibers are produced through a combination of electrospinning and sol-gel technique.The morphologies,composition and structure are investigated by Scanning Electron Microscopy (SEM),Thermogravimetic Analysis (TGA),Fourier Transform Infrared (FTIR),X-ray Diffraction (XRD) patterns,Transmission Electron Microscopy (TEM).The results show that HA nanofibers are even and well-crystallized,and pH is crucial for producing HA nanofibers.With the change ofpH from 4 to 9,nanofibers grow densely along (210) plane and become compact while surface area,pore volume and pore size decrease correspondingly.The synthesized HA nanofibers are nontoxic and safe.Zn can be also incorporated into HA nanofibers,which will endow them with more perfect function.

  16. Ammonia Sensing Behaviors of TiO2-PANI/PA6 Composite Nanofibers

    Science.gov (United States)

    Wang, Qingqing; Dong, Xianjun; Pang, Zengyuan; Du, Yuanzhi; Xia, Xin; Wei, Qufu; Huang, Fenglin

    2012-01-01

    Titanium dioxide-polyaniline/polyamide 6 (TiO2-PANI/PA6) composite nanofibers were prepared by in situ polymerization of aniline in the presence of PA6 nanofibers and a sputtering-deposition process with a high purity titanium sputtering target. TiO2-PANI/PA6 composite nanofibers and PANI/PA6 composite nanofibers were fabricated for ammonia gas sensing. The ammonia sensing behaviors of the sensors were examined at room temperature. All the results indicated that the ammonia sensing property of TiO2-PANI/PA6 composite nanofibers was superior to that of PANI/PA6 composite nanofibers. TiO2-PANI/PA6 composite nanofibers had good selectivity to ammonia. It was also found that the content of TiO2 had a great influence on both the morphology and the sensing property of TiO2-PANI/PA6 composite nanofibers. PMID:23235446

  17. Ammonia Sensing Behaviors of TiO2-PANI/PA6 Composite Nanofibers

    Directory of Open Access Journals (Sweden)

    Fenglin Huang

    2012-12-01

    Full Text Available Titanium dioxide-polyaniline/polyamide 6 (TiO2-PANI/PA6 composite nanofibers were prepared by in situ polymerization of aniline in the presence of PA6 nanofibers and a sputtering-deposition process with a high purity titanium sputtering target. TiO2-PANI/PA6 composite nanofibers and PANI/PA6 composite nanofibers were fabricated for ammonia gas sensing. The ammonia sensing behaviors of the sensors were examined at room temperature. All the results indicated that the ammonia sensing property of TiO2-PANI/PA6 composite nanofibers was superior to that of PANI/PA6 composite nanofibers. TiO2-PANI/PA6 composite nanofibers had good selectivity to ammonia. It was also found that the content of TiO2 had a great influence on both the morphology and the sensing property of TiO2-PANI/PA6 composite nanofibers.

  18. Transparent Conductive Films Fabricated from Polythiophene Nanofibers Composited with Conventional Polymers

    Directory of Open Access Journals (Sweden)

    Borjigin Aronggaowa

    2013-11-01

    Full Text Available Transparent, conductive films were prepared by compositing poly(3-hexylthiophene (P3HT nanofibers with poly(methyl methacrylate (PMMA. The transparency, conductivity, atmospheric stability, and mechanical strength of the resulting nanofiber composite films when doped with AuCl3 were evaluated and compared with those of P3HT nanofiber mats. The conductivity of the nanofiber composite films was 4.1 S∙cm−1, which is about seven times less than that which was previously reported for a nanofiber mat with the same optical transmittance (~80% reported by Aronggaowa et al. The time dependence of the transmittance, however, showed that the doping state of the nanofiber composite films in air was more stable than that of the nanofiber mats. The fracture stress of the nanofiber composite film was determined to be 12.3 MPa at 3.8% strain.

  19. A super hydrophilic modification of poly(vinylidene fluoride) (PVDF) nanofibers: By in situ hydrothermal approach

    Science.gov (United States)

    Sheikh, Faheem A.; Zargar, Mohammad Afzal; Tamboli, Ashif H.; Kim, Hern

    2016-11-01

    Nanofibers fabricated from Poly(vinylidene fluoride) (PVDF) possesses potential applications in the field of filtrations, because of their excellent resistance towards harsh chemicals. However, the hydrophobicity restricts its further application. In this work, we focus on optimal parameters for post-electrospun tethering of Poly(vinyl alcohol) (PVA) as superhydrophilic domain onto each individual PVDF nanofibers by exploiting the in situ hydrothermal approach. The results indicated an increase in nanofiber diameters due to coating of PVA and improved surface wettability of PVDF nanofibers. The tensile tests of nanofibers indicated that mechanical properties of PVDF nanofibers could be sharply tuned from rigid to ductile. Furthermore, the studies strongly suggest that in situ hydrothermal treatment of post-electrospun nanofibers can improve the water contact angle and these nanofibers can be used in varied applications (e.g., in water purification systems).

  20. Efficient Roll-on Transfer Technique for Well-Aligned Organic Nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter

    2011-01-01

    A transfer technique enabling efficient device integration of fragile organic nanostructures is presented. The technique is capable of transferring organic nanofibers to arbitrary substrates, the preservation of nanofiber morphology is demonstrated, and the optical properties are unaffected or ev...

  1. Fabrication of Cellulose Nanofiber/AlOOH Aerogel for Flame Retardant and Thermal Insulation

    OpenAIRE

    Bitao Fan; Shujun Chen; Qiufang Yao; Qingfeng Sun; Chunde Jin

    2017-01-01

    Cellulose nanofiber/AlOOH aerogel for flame retardant and thermal insulation was successfully prepared through a hydrothermal method. Their flame retardant and thermal insulation properties were investigated. The morphology image of the cellulose nanofiber/AlOOH exhibited spherical AlOOH with an average diameter of 0.5 μm that was wrapped by cellulose nanofiber or adhered to them. Cellulose nanofiber/AlOOH composite aerogels exhibited excellent flame retardant and thermal insulation propertie...

  2. Carbon nanofiber supercapacitors with large areal capacitances

    KAUST Repository

    McDonough, James R.

    2009-01-01

    We develop supercapacitor (SC) devices with large per-area capacitances by utilizing three-dimensional (3D) porous substrates. Carbon nanofibers (CNFs) functioning as active SC electrodes are grown on 3D nickel foam. The 3D porous substrates facilitate a mass loading of active electrodes and per-area capacitance as large as 60 mg/ cm2 and 1.2 F/ cm2, respectively. We optimize SC performance by developing an annealing-free CNF growth process that minimizes undesirable nickel carbide formation. Superior per-area capacitances described here suggest that 3D porous substrates are useful in various energy storage devices in which per-area performance is critical. © 2009 American Institute of Physics.

  3. Superhydrophobic behavior of fluorinated carbon nanofiber arrays

    Science.gov (United States)

    Hsieh, Chien-Te; Fan, Wen-Syuan

    2006-06-01

    Superhydrophobic behavior of fluorinated carbon nanofiber (CNF) arrays, prepared by a template-assisted synthesis, has been investigated. A thermal chemical vapor method, using perfluorohexane as the precursor, was used to coat fluorocarbon on the surface of the CNFs, thus lowering their surface tension. The F-coated CNFs exhibited a good water-repellent behavior, i.e., the highest value of contact angle ˜166°. The superhydrophobicity of water droplets on the arrays can be well predicted by a modified Cassie-Baxter model, incorporating the pore size distributions determined from the density functional theory method. This satisfactory result would shed one light on how the variation of opened sizes would induce the superhydrophobicity of nanostructured surfaces.

  4. Microstructure transformation of carbon nanofibers during graphitization

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yong; TANG Yuan-hong; LIN Liang-wu; ZHANG En-lei

    2008-01-01

    The mierostructures of vapor-grown carbon nanofibers(CNFs) before and after graphitization process were analyzed by high resolution transmission electron microscopy(HRTEM), Raman spectroscopy, X-ray diffractometry(XRD), near-edge-X-ray absorption fine structure spectroscopy(NEXAFS) and thermogravimetric analysis(TGA). The results indicate that although non-graphitized CNFs have the characteristics of higher disorder, a transformation is found in the inner layer of tube wall where graphite sheets become stiff, which demonstrates the characteristics of higher graphitization of graphitized CNFs. The defects in outer tube wall disappear because the amorphous carbon changes to perfect crystalline carbon after annealing treatment at about 2 800 ℃. TGA analysis in air indicates that graphitized CNFs have excellent oxidation resistance up to 857 ℃. And the graphitization mechanism including four stages was also proposed.

  5. Frame Stability of Tunnel‐Structured Cryptomelane Nanofibers: The Role of Tunnel Cations

    DEFF Research Database (Denmark)

    Gao, Tao; Norby, Poul

    2013-01-01

    The role of tunnel K+ ions on the growth and stability of tunnel‐structured cryptomelane‐type MnO2 nanofibers (denoted as cryptomelane nanofibers hereafter) has been discussed by means of X‐ray diffraction and electron microscopy. Cryptomelane nanofibers with typical diameters of 20–80 nm and len...

  6. Fabrications of electrospun nanofibers containing inorganic fillers for dye-sensitized solar cells.

    Science.gov (United States)

    Kim, Young-Keun; Hwang, Won-Pill; Seo, Min-Hye; Lee, Jin-Kook; Kim, Mi-Ra

    2014-08-01

    Poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers containing inorganic fillers were fabricated by electrospinning. Dye-sensitized solar cells (DSSCs) using these nanofibers showed improved short circuit currents without degraded fill factors or open circuit voltages. The long-term stabilities of cells using electrospun PVDF-HFP/titanium isopropoxide (TIP) nanofibers were significantly improved.

  7. In Situ Generation of Cellulose Nanocrystals in Polycaprolactone Nanofibers: Effects on Crystallinity, Mechanical Strength, Biocompatibility, and Biomimetic Mineralization.

    Science.gov (United States)

    Joshi, Mahesh Kumar; Tiwari, Arjun Prasad; Pant, Hem Raj; Shrestha, Bishnu Kumar; Kim, Han Joo; Park, Chan Hee; Kim, Cheol Sang

    2015-09-01

    Post-electrospinning treatment is a facile process to improve the properties of electrospun nanofibers for various applications. This technique is commonly used when direct electrospinning is not a suitable option to fabricate a nonwoven membrane of the desired polymer in a preferred morphology. In this study, a representative natural-synthetic hybrid of cellulose acetate (CA) and polycaprolactone (PCL) in different ratios was fabricated using an electrospinning process, and CA in the hybrid fiber was transformed into cellulose (CL) by post-electrospinning treatment via alkaline saponification. Scanning electron microscopy was employed to study the effects of polymer composition and subsequent saponification on the morphology of the nanofibers. Increasing the PCL content in the PCL/CA blend solution caused a gradual decrease in viscosity, resulting in smoother and more uniform fibers. The saponification of fibers lead to pronounced changes in the physicochemical properties. The crystallinity of the PCL in the composite fiber was varied according to the composition of the component polymers. The water contact angle was considerably decreased (from 124° to less than 20°), and the mechanical properties were greatly enhanced (Young's Modulus was improved by ≈20-30 fold, tensile strength by 3-4 fold, and tensile stress by ≈2-4 fold) compared to those of PCL and PCL/CA membranes. Regeneration of cellulose chains in the nanofibers increased the number of hydroxyl groups, which increased the hydrogen bonding, thereby improving the mechanical properties and wettability of the composite nanofibers. The improved wettability and presence of surface functional groups enhanced the ability to nucleate bioactive calcium phosphate crystals throughout the matrix when exposed to a simulated body fluid solution. Experimental results of cell viability assay, confocal microscopy, and scanning electron microscopy imaging showed that the fabricated nanofibrous membranes have

  8. Imaging, spectroscopy, mechanical, alignment and biocompatibility studies of electrospun medical grade polyurethane (Carbothane™ 3575A) nanofibers and composite nanofibers containing multiwalled carbon nanotubes.

    Science.gov (United States)

    Sheikh, Faheem A; Macossay, Javier; Cantu, Travis; Zhang, Xujun; Shamshi Hassan, M; Esther Salinas, M; Farhangi, Chakavak S; Ahmad, Hassan; Kim, Hern; Bowlin, Gary L

    2015-01-01

    In the present study, we discuss the electrospinning of medical grade polyurethane (Carbothane™ 3575A) nanofibers containing multi-walled-carbon-nanotubes (MWCNTs). A simple method that does not depend on additional foreign chemicals has been employed to disperse MWCNTs through high intensity sonication. Typically, a polymer solution consisting of polymer/MWCNTs has been electrospun to form nanofibers. Physiochemical aspects of prepared nanofibers were evaluated by SEM, TEM, FT-IR and Raman spectroscopy, confirming nanofibers containing MWCNTs. The biocompatibility and cell attachment of the produced nanofiber mats were investigated while culturing them in the presence of NIH 3T3 fibroblasts. The results from these tests indicated non-toxic behavior of the prepared nanofiber mats and had a significant attachment of cells towards nanofibers. The incorporation of MWCNTs into polymeric nanofibers led to an improvement in tensile stress from 11.40 ± 0.9 to 51.25 ± 5.5 MPa. Furthermore, complete alignment of the nanofibers resulted in an enhancement on tensile stress to 72.78 ± 5.5 MPa. Displaying these attributes of high mechanical properties and non-toxic nature of nanofibers are recommended for an ideal candidate for future tendon and ligament grafts. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. 二氧化硅@聚合物同轴纳米纤维%Silica@Polymers Coaxial Nanofibers

    Institute of Scientific and Technical Information of China (English)

    洪友良; 商铁存; 靳玉伟; 杨帆; 王策

    2005-01-01

    The preparation and formation mechamsm ot silica/polyvinylpyrrolidone(PAN) coaxial nanofibers were presented in this paper. The PVP-PAN composite nanofibers were obtained via an electrospinning technique, while SiO2 nanoparticles were prepared according to a Stoeher method. The measurements of water contact angle(WCA), the compared results of silica coating PVPPAN composite nanofibers with PAN nanofibers indicate that much PVP resided on the composite nanofiber surface, which resuks in the occurrence of SiO2@polymer coaxial nanofibers due to the formation of hydrogen bonding between silica and composite nanofibers and subsequent adsorption of silica on the fiber surface.

  10. Hierarchical Structures and Shaped Particles of Bioactive Glass and Its In Vitro Bioactivity

    Directory of Open Access Journals (Sweden)

    U. Boonyang

    2013-01-01

    Full Text Available In this study, bioactive glass particles with controllable structure and porosity were prepared using dual-templating methods. Block copolymers used as one template component produced mesopores in the calcined samples. Polymer colloidal crystals as the other template component yielded either three-dimensionally ordered macroporous (3DOM products or shaped bioactive glass nanoparticles. The in vitro bioactivity of these bioactive glasses was studied by soaking the samples in simulated body fluid (SBF at body temperature (37°C for varying lengths of time and monitoring the formation of bone-like apatite on the surface of the bioactive glass. A considerable bioactivity was found that all of bioactive glass samples have the ability to induce the formation of an apatite layer on its surface when in contact with SBF. The development of bone-like apatite is faster for 3DOM bioactive glasses than for nanoparticles.

  11. Bioactive Phenols in Small Fruits and Berries

    OpenAIRE

    Guiné, R. P. F.

    2016-01-01

    Bioactive compounds are extra nutritional constituents occurring naturally in plant foods in small amounts, however in quantities enough to produce bioactive effects. Among bioactive compounds the phenolic compounds are a very large set of molecules, which include several groups such as for example flavonoids, phenolic acids or tannins. Small fruits and berries include a wide diversity of fruits, like grapes, strawberries, blackberries, blueberries, raspberries, cherries, hardi kiwi, gooseber...

  12. Nanofibers of Ca2Fe2O5: A novel material for aqueous supercapacitor

    Science.gov (United States)

    Sundriyal, Sandeep Kumar; Bhagwan, Jai; Sharma, Yogesh

    2016-05-01

    Porous, aligned and high aspect ratio nanofibers of Ca2Fe2O5 (CFO) have been fabricated by varying various system and process parameter of electrospinning technique for the first time. CFO nanofibers are further characterized by XRD, FESEM and BET surface area. The diameter of as-spun nanofibers of CFO was found to be polymer concentration dependent. Heating profile is found to be responsible for alignment of CFO nanofibers. For the first time, novel CFO nanofibers were subjected to cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) cycling to investigate its energy storage performance as electrode material for aqueous supercapacitor, and accordingly preliminary results are discussed.

  13. Wet-Laid Meets Electrospinning: Nonwovens for Filtration Applications from Short Electrospun Polymer Nanofiber Dispersions.

    Science.gov (United States)

    Langner, Markus; Greiner, Andreas

    2016-02-01

    Dispersions of short electrospun fibers are utilized for the preparation of nanofiber nonwovens with different weight area on filter substrates. The aerosol filtration efficiencies of suspension-borne nanofiber nonwovens are compared to nanofiber nonwovens prepared directly by electrospinning with similar weight area. The filtration efficiencies are found to be similar for both types of nonwovens. With this, a large potential opens for processing, design, and application of new nanofiber nonwovens obtained by wet-laying of short electrospun nanofiber suspensions. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Synthesis and electrical property of indium tin oxide nanofibers using electrospinning method.

    Science.gov (United States)

    Lee, Young-In; Lee, Kun-Jae; Kim, Ki Do; Kim, Hee Taik; Chang, Young-Wook; Kang, Shin-Choon; Choa, Yong-Ho

    2007-11-01

    In this study indium tin oxide (ITO) nanofibers were synthesized using an electrospinning method. The morphological properties of the ITO nanofibers were considered and their specific resistances were measured to determine their applicability as filler for a transparent conducting film. ITO/PVP composite nanofibers were successfully obtained by electrospinning using a precursor solution containing indium nitrate, tin chloride, and poly(vinlypyrrolidone). After the heat treatment of ITO/PVP composite nanofibers at 600 degrees C and 1000 degrees C, ITO nanofibers with an average diameter of about 168 nm and 165 nm were synthesized, respectively.

  15. Spherical and rodlike inorganic nanoparticle regulated the orientation of carbon nanotubes in polymer nanofibers

    Science.gov (United States)

    Jiang, Linbin; Tu, Hu; Lu, Yuan; Wu, Yang; Tian, Jing; Shi, Xiaowen; Wang, Qun; Zhan, Yingfei; Huang, Zuqiang; Deng, Hongbing

    2016-04-01

    PVA nanofibers containing carboxylic-modified MWCNTs were fabricated via electrospinning of PVA/MWCNTs mixed solution. The alignment of MWCNTs in PVA nanofibers was studied using transmission electron microscope and scanning electron microscope. In addition, the orientation of MWCNTs in PVA nanofibers was further investigated in the presence of rod-like nanoparticle rectorite (REC) and of spherical nanoparticle titanium dioxide (TiO2). The images demonstrated the embedment of MWCNTs in the nanofibers and the alignment of MWCNTs along the fiber axis. Moreover, the addition of REC and TiO2 improved the alignment of MWCNTs in PVA nanofibers.

  16. Bioactive Triterpenes from the Fungus Piptoporus betulinus

    National Research Council Canada - National Science Library

    Zeyad Alresly; Ulrike Lindequist; Michael Lalk; Andrea Porzel; Norbert Arnold; Ludger AWessjohann

    2016-01-01

      Phytochemical investigation of the ethyl acetate extract of the fruiting bodies from the basidiomycete Piptoporus betulinus led to the isolation of a new bioactive lanostane triterpene identified...

  17. Bioactive glasses materials, properties and applications

    CERN Document Server

    Ylänen, Heimo

    2011-01-01

    Due to their biocompatibility and bioactivity, bioactive glasses are used as highly effective implant materials throughout the human body to replace or repair damaged tissue. As a result, they have been in continuous use since shortly after their invention in the late 1960s and are the subject of extensive research worldwide.Bioactive glasses provides readers with a detailed review of the current status of this unique material, its properties, technologies and applications. Chapters in part one deal with the materials and mechanical properties of bioactive glass, examining topics such

  18. Syringeless Electrospinning toward Versatile Fabrication of Nanofiber Web

    Science.gov (United States)

    Moon, Seongjun; Gil, Manjae; Lee, Kyung Jin

    2017-01-01

    Although electrospinning is considered a powerful and generic tool for the preparation of nanofiber webs, several issues still need to be overcome for real-world applications. Most of these issues stem from the use of a syringe-based system, where the key factor influencing successful electrospinning is the maintenance of several subtle balances such as those of between the mass and the electrical state. It is extremely difficult to maintain these balances throughout the spinning process until all the polymeric solution in the syringe has been consumed. To overcome these limitations, we have developed a syringeless electrospinning technique as an alternative and efficient means of preparing a nanofiber web. This new technique uses a helically probed rotating cylinder. This technique can not only cover conventional methods, but also provides several advantages over syringe-based and needless electrospinning in terms of productivity (6 times higher) and processibility. For example, we can produce nanofibers with highly crystalline polymers and nanofiber-webs comprising networks of several different polymers, which is sometimes difficult in conventional electrospinning. In addition, this method provides several benefits for colloidal electrospinning as well. This method should help expand the range of applications for electrospun nanofiber webs in the near future.

  19. Polypyrrole-Coated Electrospun PLGA Nanofibers for Neural Tissue Applications

    Science.gov (United States)

    Lee, Jae Young; Bashur, Chris A.; Goldstein, Aaron S.; Schmidt, Christine E.

    2009-01-01

    Electrospinning is a promising approach to create nanofiber structures that are capable of supporting adhesion and guiding extension of neurons for nerve regeneration. Concurrently, electrical stimulation of neurons in the absence of topographical features also has been shown to guide axonal extension. Therefore, the goal of this study was to form electrically conductive nanofiber structures and to examine the combined effect of nanofiber structures and electrical stimulation. Conductive meshes were produced by growing polypyrrole (PPy) on random and aligned electrospun poly(lactic-co-glycolic acid) (PLGA) nanofibers, as confirmed by scanning electron micrographs and X-ray photon spectroscopy. PPy-PLGA electrospun meshes supported the growth and differentiation of rat pheochromocytoma 12 (PC12) cells and hippocampal neurons comparable to non-coated PLGA control meshes, suggesting that PPy-PLGA may be suitable as conductive nanofibers for neuronal tissue scaffolds. Electrical stimulation studies showed that PC12 cells, stimulated with a potential of 10 mV/cm on PPy-PLGA scaffolds, exhibited 40–50% longer neurites and 40–90% more neurite formation compared to unstimulated cells on the same scaffolds. In addition, stimulation of the cells on aligned PPy-PLGA fibers resulted in longer neurites and more neurite-bearing cells than stimulation on random PPy-PLGA fibers, suggesting a combined effect of electrical stimulation and topographical guidance and the potential use of these scaffolds for neural tissue applications. PMID:19501901

  20. Application of Nanofiber Technology to Nonwoven Thermal Insulation

    Directory of Open Access Journals (Sweden)

    Phillip W. Gibson, Ph.D

    2007-07-01

    Full Text Available Nanofiber technology (fiber diameter less than 1 micrometer is under development for future Army lightweight protective clothing systems. Nanofiber applications for ballistic and chemical/biological protection are being actively investigated, but the thermal properties of nanofibers and their potential protection against cold environments are relatively unknown. Previous studies have shown that radiative heat transfer in fibrous battings is minimized at fiber diameters between 5 and 10 micrometers. However, the radiative heat transfer mechanism of extremely small diameter fibers of less than 1 micrometer diameter is not well known. Previous studies were limited to glass fibers, which have a unique set of thermal radiation properties governed by the thermal emissivity properties of glass. We are investigating the thermal transfer properties of high loft nanofiber battings composed of carbon fiber and various polymeric fibers such as polyacrylonitrile, nylon, and polyurethane. Thermal insulation battings incorporating nanofibers could decrease the weight and bulk of current thermal protective clothing, and increase mobility for soldiers in the battlefield.

  1. Encapsulation of Lactobacillus plantarum 423 and its Bacteriocin in Nanofibers.

    Science.gov (United States)

    Heunis, T D J; Botes, M; Dicks, L M T

    2010-03-01

    Plantaricin 423, produced by Lactobacillus plantarum 423, was encapsulated in nanofibers that were produced by the electrospinning of 18% (w/v) polyethylene oxide (200 000 Da). The average diameter of the nanofibers was 288 nm. Plantaricin 423 activity decreased from 51 200 AU/ml to 25 600 AU/ml and from 204 800 AU/ml to 51 200 AU/ml after electrospinning, as determined against Lactobacillus sakei DSM 20017 and Enterococcus faecium HKLHS, respectively. Cells of L. plantarum 423 encapsulated in nanofibers decreased from 2.3 × 10(10) cfu/ml before electrospinning to 4.7 × 10(8) cfu/ml thereafter. Cells entrapped in the nanofibers continued to produce plantaricin 423. This is the first report on the encapsulation of a bacteriocin and cells of L. plantarum in nanofibers. The method may be used to design a drug delivery system for bacteriocins and the encapsulation of probiotic lactic acid bacteria. The technology is currently being optimized.

  2. Solution Blow Spinning of Food-Grade Gelatin Nanofibers.

    Science.gov (United States)

    Liu, Fei; Avena-Bustillos, Roberto J; Bilbao-Sainz, Cristina; Woods, Rachelle; Chiou, Bor-Sen; Wood, Delilah; Williams, Tina; Yokoyama, Wallace; Glenn, Gregory M; McHugh, Tara H; Zhong, Fang

    2017-06-01

    The primary advantage of nanofibers over larger diameter fibers is the larger surface area to volume ratio. This study evaluated solution blow spinning (SBS) processing conditions for obtaining food-grade gelatin nanofibers from mammalian and fishery byproducts, such as pork skin gelatins (PGs) and high molecular weight fish skin gelatin (HMWFG). HMWFG had a highest intact collagen structure compared to PGs. PGs with different Bloom values, solution viscosities, and surface tensions were compared with HMWFG for their ability to produce nanofibers through SBS. Only HMWFG fibers were obtained irrespective of processing conditions, which looked like fluffy cotton candy. HMWFG nanofibers had round morphologies with a narrower diameter distribution and lower average fiber diameter (AFD) under medium gelatin concentrations, medium air pressures, and medium feed rates. The highest glass transition temperature (Tg ) values were obtained at medium concentrations, medium air pressure, and either high or low feed rate. The thinnest HMWFG nanofibers with an AFD of 80.1 nm and the highest Tg value of 59.0 °C could be formed by combining a concentration of 17.6% (w/v), an air pressure of 0.379 MPa, and a feed rate of 0.06 mL/min from the response surface analysis. HMWFG Brunauer, Emmett, and Teller surface area increased from 221 to 237 m(2) /g, indicating their potential applicability for active compound carrier. © 2017 Institute of Food Technologists®.

  3. Phytotoxicity of soluble graphitic nanofibers to model plant species.

    Science.gov (United States)

    Gorka, Danielle E; Jeger, Jonathan Litvak; Zhang, Hongbo; Ma, Yanwen; Colman, Benjamin P; Bernhardt, Emily S; Liu, Jie

    2016-12-01

    Carbon nanomaterials are considered promising for applications in energy storage, catalysis, and electronics. This has motivated study of their potential environmental toxicity. Recently, a novel nanomaterial consisting of graphene oxide wrapped around a carbon nanotube (CNT) core was synthesized. The resulting soluble graphitic nanofibers were found to have superior catalytic properties, which could result in their use in fuel cells. Before this material undergoes widespread use, its environmental toxicity must be determined because of its aqueous solubility. The authors used the plant species Lolium multiflorum, Solanum lycopersicum, and Lactuca sativa to study the toxicity of the soluble graphitic nanofibers, as well as multiwalled carbon nanotubes (MWCNTs) and graphene oxide, all synthesized in-house. Soluble graphitic nanofiber-exposed plant roots and shoots showed decreased growth, with roots showing more toxicity than shoots. Decreased pH of nanomaterial solutions corresponded to insignificantly decreased root growth, suggesting that another mechanism of toxicity must exist. Agglomeration and adsorption of soluble graphitic nanofibers onto the roots likely caused the remaining toxicity because a gray layer could be seen around the surface of the root. Multiwalled carbon nanotubes showed little toxicity over the concentration range tested, whereas graphene oxide showed a unique pattern of high toxicity at both the lowest and highest concentrations tested. Overall, soluble graphitic nanofibers showed moderate toxicity between that of the more toxic graphene oxide and the relatively nontoxic MWCNTs. Environ Toxicol Chem 2016;35:2941-2947. © 2016 SETAC.

  4. Syringeless Electrospinning toward Versatile Fabrication of Nanofiber Web

    Science.gov (United States)

    Moon, Seongjun; Gil, Manjae; Lee, Kyung Jin

    2017-01-01

    Although electrospinning is considered a powerful and generic tool for the preparation of nanofiber webs, several issues still need to be overcome for real-world applications. Most of these issues stem from the use of a syringe-based system, where the key factor influencing successful electrospinning is the maintenance of several subtle balances such as those of between the mass and the electrical state. It is extremely difficult to maintain these balances throughout the spinning process until all the polymeric solution in the syringe has been consumed. To overcome these limitations, we have developed a syringeless electrospinning technique as an alternative and efficient means of preparing a nanofiber web. This new technique uses a helically probed rotating cylinder. This technique can not only cover conventional methods, but also provides several advantages over syringe-based and needless electrospinning in terms of productivity (6 times higher) and processibility. For example, we can produce nanofibers with highly crystalline polymers and nanofiber-webs comprising networks of several different polymers, which is sometimes difficult in conventional electrospinning. In addition, this method provides several benefits for colloidal electrospinning as well. This method should help expand the range of applications for electrospun nanofiber webs in the near future. PMID:28120916

  5. Needleless Electrospinning Experimental Study and Nanofiber Application in Semiconductor Packaging

    Science.gov (United States)

    Sun, Tianwei

    Electronics especially mobile electronics such as smart phones, tablet PCs, notebooks and digital cameras are undergoing rapid development nowadays and have thoroughly changed our lives. With the requirement of more transistors, higher power, smaller size, lighter weight and even bendability, thermal management of these devices became one of the key challenges. Compared to active heat management system, heat pipe, which is a passive fluidic system, is considered promising to solve this problem. However, traditional heat pipes have size, weight and capillary limitation. Thus new type of heat pipe with smaller size, lighter weight and higher capillary pressure is needed. Nanofiber has been proved with superior properties and has been applied in multiple areas. This study discussed the possibility of applying nanofiber in heat pipe as new wick structure. In this study, a needleless electrospinning device with high productivity rate was built onsite to systematically investigate the effect of processing parameters on fiber properties as well as to generate nanofiber mat to evaluate its capability in electronics cooling. Polyethylene oxide (PEO) and Polyvinyl Alcohol (PVA) nanofibers were generated. Tensiometer was used for wettability measurement. The results show that independent parameters including spinneret type, working distance, solution concentration and polymer type are strongly correlated with fiber morphology compared to other parameters. The results also show that the fabricated nanofiber mat has high capillary pressure.

  6. Antibacterial Properties of Novel Bacterial Cellulose Nanofiber Containing Silver Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    杨加志; 刘晓丽; 黄立勇; 孙东平

    2013-01-01

    In this work, we describe a novel facile method to prepare long one-dimensional hybrid nanofibers by using hydrated bacterial cellulose nanofibers (BCF) as a template. Silver (Ag) nanoparticles with an average di-ameter of 1.5 nm were well dispersed on BCF via a simple in situ chemical-reduction between AgNO3 and NaBH4 at a relatively low temperature. A growth mechanism is proposed that Ag nanoparticles are uniformly anchored onto BCF by coordination with BC-containing hydroxyl groups. The bare BCF and as-prepared Ag/BCF hybrid nanofibers were characterized by several techniques including transmission electron microscopy, X-ray diffraction, thermogra-vimetric analyses, and ultraviolet-visible (UV-Vis) absorption spectra. The antibacterial properties of Ag/BCF hybrid nanofibers against Escherichia coli (E. coli, Gram-negative) and Staphylococcu saureus (S. saureus, Gram-positive) bacteria were evaluated by using modified Kirby Bauer method and colony forming count method. The results show that Ag nanoparticles are well dispersed on BCF surface via in situ chemical-reduction. The Ag/BCF hybrid nanofiber presents strong antibacterial property and thus offers its candidature for use as functional antimicrobial agents.

  7. Enhancement of Ultrahigh Performance Concrete Material Properties with Carbon Nanofiber

    Directory of Open Access Journals (Sweden)

    Libya Ahmed Sbia

    2014-01-01

    Full Text Available Ultrahigh performance concrete (UHPC realized distinctly high mechanical, impermeability, and durability characteristics by reducing the size and content of capillary pore, refining the microstructure of cement hydrates, and effectively using fiber reinforcement. The dense and fine microstructure of UHPC favor its potential to effectively disperse and interact with nanomaterials, which could complement the reinforcing action of fibers in UHPC. An optimization experimental program was implemented in order to identify the optimum combination of steel fiber and relatively low-cost carbon nanofiber in UHPC. The optimum volume fractions of steel fiber and carbon nanofiber identified for balanced improvement of flexural strength, ductility, energy sorption capacity, impact, and abrasion resistance of UHPC were 1.1% and 0.04%, respectively. Desired complementary/synergistic actions of nanofibers and steel fibers in UHPC were detected, which were attributed to their reinforcing effects at different scales, and the potential benefits of nanofibers to interfacial bonding and pull-out behavior of fibers in UHPC. Modification techniques which enhanced the hydrophilicity and bonding potential of nanofibers to cement hydrates benefited their reinforcement efficiency in UHPC.

  8. Electrospun functionalized polyaniline copolymer-based nanofibers with potential application in tissue engineering.

    Science.gov (United States)

    Gizdavic-Nikolaidis, Marija; Ray, Sudip; Bennett, Jared R; Easteal, Allan J; Cooney, Ralph P

    2010-12-08

    Nanofibrous blends of HCl-doped poly(aniline-co-3-aminobenzoic acid) (3ABAPANI) copolymer and poly(lactic acid) (PLA) were fabricated by electrospinning solutions of the polymers, in varying relative proportions, in dimethyl sulfoxide/tetrahydrofuran mixture. The morphology, mechanical and electrical properties of the nanofibers were characterized and an assessment of their bioactivity performed. To assess cell morphology and biocompatibility, pure PLA and 3ABAPANI-PLA nanofibrous mats were deposited in the form of three-dimensional networks with a high degree of connectivity, on glass substrates, and their ability to promote proliferation of COS-1 fibroblast cells was determined. The nanofibrous electrospun 3ABAPANI-PLA blends gave enhanced cell growth, potent antimicrobial capability against Staphylococcus aureus and electrical conductivity. This new class of nanofibrous blends can potentially be employed as tissue engineering scaffolds, and in particular have showed promise as the basis of a new generation of functional wound dressings that may eliminate deficiencies of currently available antimicrobial dressings.

  9. Facile fabrication of aloe vera containing PCL nanofibers for barrier membrane application.

    Science.gov (United States)

    Carter, Princeton; Rahman, Shekh M; Bhattarai, Narayan

    2016-01-01

    Guided tissue regeneration (GTR) is a widely used method in dental surgical procedures that utilizes a barrier membrane to exclude migration of epithelium and ensure repopulation of periodontal ligament cells at the sites having insufficient gingiva. Commercial GTR membranes are typically composed of synthetic polymers that have had mild clinical success mostly because of their lack of proper bioactivity and appropriate degradation profile. In this study, a natural polymer, aloe vera was blended with polycaprolactone (PCL) to create nanofibrous GTR membranes by electrospinning. Aloe vera has proven anti-inflammatory properties and enhances the regeneration of periodontium tissues. PCL, a synthetic polymer, is well known to produce miscible polyblends nanofibers with natural polymers. Nanofibrous membranes with varying composition of PCL to aloe vera were fabricated, and several physicochemical and biological properties, such as fiber morphology, wettability, chemical structure, mechanical strength, and cellular compatibility of the membranes were analyzed. PCL/aloe vera membranes with ratios from 100/00 to 70/30 showed good uniformity in fiber morphology and suitable mechanical properties, and retained the integrity of their fibrous structure in aqueous solutions. Experimental results, using cell viability assay and cell attachment observation, showed that the nanofibrous membranes support 3T3 cell viability and could be a potential candidate for GTR therapy.

  10. Chondroitin sulfate immobilization at the surface of electrospun nanofiber meshes for cartilage tissue regeneration approaches

    Science.gov (United States)

    Piai, Juliana Francis; da Silva, Marta Alves; Martins, Albino; Torres, Ana Bela; Faria, Susana; Reis, Rui L.; Muniz, Edvani Curti; Neves, Nuno M.

    2017-05-01

    Aiming at improving the biocompatibility of biomaterial scaffolds, surface modification presents a way to preserve their mechanical properties and to improve the surface bioactivity. In this work, chondroitin sulfate (CS) was immobilized at the surface of electrospun poly(caprolactone) nanofiber meshes (PCL NFMs), previously functionalized by UV/O3 exposure and aminolysis. Contact angle, SEM, optical profilometry, FTIR, X-ray photoelectron spectroscopy techniques confirmed the success of CS-immobilization in PCL NFMs. Furthermore, CS-immobilized PCL NFMs showed lower roughness and higher hydrophilicity than the samples without CS. Human articular chondrocytes (hACs) were cultured on electrospun PCL NFMs with or without CS immobilization. It was observed that hACs proliferated through the entire time course of the experiment in both types of nanofibrous scaffolds, as well as for the production of glycosaminoglycans. Quantitative-PCR results demonstrated over-expression of cartilage-related genes such as Aggrecan, Collagen type II, COMP and Sox9 on both types of nanofibrous scaffolds. Morphological observations from SEM and LSCM revealed that hACs maintained their characteristic round shape and cellular agglomeration exclusively on PCL NFMs with CS immobilization. In conclusion, CS immobilization at the surface of PCL NFMs was achieved successfully and provides a valid platform enabling further surface functionalization methods in scaffolds to be developed for cartilage tissue engineering.

  11. Evaluation of proanthocyanidin-crosslinked electrospun gelatin nanofibers for drug delivering system

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Chiung-Hua [Department of Medical Laboratory Science and Biotechnology, Central Taiwan University of Science and Technology, Taichung 40601, Taiwan (China); Chi, Chin-Ying [Institute of Biomedical Engineering and Materials Science, Central Taiwan University of Science and Technology, Taichung 40601, Taiwan (China); Chen, Yueh-Sheng [School of Chinese Medicine, China Medical University, Taichung 40402, Taiwan (China); Department of Biomedical Imaging and Radiological Science, China Medical University, Taichung 40402, Taiwan (China); Chen, Kuo-Yu [Department of Chemical and Materials Engineering, National Yunlin University of Science and Technology, Yunlin 64002, Taiwan (China); Chen, Pei-Lain [Department of Medical Laboratory Science and Biotechnology, Central Taiwan University of Science and Technology, Taichung 40601, Taiwan (China); Yao, Chun-Hsu, E-mail: chyao@mail.cmu.edu.tw [School of Chinese Medicine, China Medical University, Taichung 40402, Taiwan (China); Department of Biomedical Imaging and Radiological Science, China Medical University, Taichung 40402, Taiwan (China)

    2012-12-01

    Electrospun nanofibers are excellent candidates for various biomedical applications. We successfully fabricated proanthocyanidin-crosslinked gelatin electrospun nanofibers. Proanthocyanidin, a low cytotoxic collagen crosslinking reagent, increased the gelatin crosslinking percentage in the nanofibers from 53% to 64%. The addition of proanthocyanidin kept the nanofibers from swelling, and, thus, made the fibers more stable in the aqueous state. The compatibility and the release behavior of the drug in the nanofibers were examined using magnesium ascorbyl phosphate as the model drug. Proanthocyanidin also promoted drug loading and kept the drug release rate constant. These properties make the proanthocyanidin-crosslinked gelatin nanofibers an excellent material for drug delivery. In the cell culture study, L929 fibroblast cells had a significantly higher proliferation rate when cultured with the gelatin/proanthocyanidin blended nanofibers. This characteristic showed that proanthocyanidin-crosslinked gelatin electrospun nanofibers could potentially be employed as a wound healing material by increasing cell spreading and proliferation. - Highlights: Black-Right-Pointing-Pointer Proanthocyanidin-crosslinked gelatin nanofibers (GEL/PA) is synthesized. Black-Right-Pointing-Pointer Proanthocyanidin promoted drug loading and kept the drug release rate constant. Black-Right-Pointing-Pointer The GEL/PA nanofibers accelerate fibroblast cell proliferation. Black-Right-Pointing-Pointer The GEL/PA nanofibers increase the drug loading efficiency.

  12. Surface functionalization of carbon nanofibers by sol-gel coating of zinc oxide

    Energy Technology Data Exchange (ETDEWEB)

    Shao Dongfeng [Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122 (China); Changzhou Textile Garment Institute, Changzhou 213164 (China); Wei Qufu [Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122 (China)], E-mail: qfwei@jiangnan.edu.cn; Zhang Liwei; Cai Yibing; Jiang Shudong [Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122 (China)

    2008-08-15

    In this paper the functional carbon nanofibers were prepared by the carbonization of ZnO coated PAN nanofibers to expand the potential applications of carbon nanofibers. Polyacrylonitrile (PAN) nanofibers were obtained by electrospinning. The electrospun PAN nanofibers were then used as substrates for depositing the functional layer of zinc oxide (ZnO) on the PAN nanofiber surfaces by sol-gel technique. The effects of coating, pre-oxidation and carbonization on the surface morphology and structures of the nanofibers were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy (SEM), respectively. The results of SEM showed a significant increase of the size of ZnO nanograins on the surface of nanofibers after the treatments of coating, pre-oxidation and carbonization. The observations by SEM also revealed that ZnO nanoclusters were firmly and clearly distributed on the surface of the carbon nanofibers. FTIR examination also confirmed the deposition of ZnO on the surface of carbon nanofibers. The XRD analysis indicated that the crystal structure of ZnO nanograins on the surface of carbon nanofibers.

  13. Cyclodextrin-grafted electrospun cellulose acetate nanofibers via “Click” reaction for removal of phenanthrene

    Science.gov (United States)

    Celebioglu, Asli; Demirci, Serkan; Uyar, Tamer

    2014-06-01

    Beta-cyclodextrin (β-CD) functionalized cellulose acetate (CA) nanofibers have been successfully prepared by combining electrospinning and “click” reaction. Initially, β-CD and electrospun CA nanofibers were modified so as to be azide-β-CD and propargyl-terminated CA nanofibers, respectively. Then, “click” reaction was performed between modified CD molecules and CA nanofibers to obtain permanent grafting of CDs onto nanofibers surface. It was observed from the SEM image that, while CA nanofibers have smooth surface, there were some irregularities and roughness at nanofibers morphology after the modification. Yet, the fibrous structure was still protected. ATR-FTIR and XPS revealed that, CD molecules were successfully grafted onto surface of CA nanofibers. The adsorption capacity of β-CD-functionalized CA (CA-CD) nanofibers was also determined by removing phenanthrene (polycyclic aromatic hydrocarbons, PAH) from its aqueous solution. Our results indicate that CA-CD nanofibers have potential to be used as molecular filters for the purpose of water purification and waste water treatment by integrating the high surface area of nanofibers with inclusion complexation property of CD molecules.

  14. Biomedical Applications of Antibacterial Nanofiber Mats Made of Electrospinning with Wire Electrodes

    Directory of Open Access Journals (Sweden)

    Yi-Jun Pan

    2016-02-01

    Full Text Available Twisted stainless steel wires are used as wire electrodes for electrospinning the polyvinyl alcohol (PVA/zinc citrate nanofiber mats. The morphology and diameter of the nanofibers in PVA/zinc citrate nanofiber mats are evaluated. We measured the antibacterial efficacy against Staphylococcus aureus (S. aureus and Escherichia coli (E. coli of the nanofiber mats. We also examined the cell adhesion affinity of mammalian tissue culture cells on these nanofiber mats. Our results indicate that an increase in zinc citrate increases the viscosity and electrical conductivity of PVA solution. In addition, increasing zinc citrate results in a smaller diameter of nanofibers that reaches below 100 nm. According to the antibacterial test results, increasing zinc citrate enlarges the inhibition zone of S. aureus but only has a bacteriostatic effect against E. coli. Finally, cell adhesion test results indicate that all nanofiber mats have satisfactory cell attachment regardless of the content of zinc citrate.

  15. Highly Aligned Poly(vinylidene fluoride-co-hexafluoro propylene) Nanofibers via Electrospinning Technique.

    Science.gov (United States)

    Han, Tae-Hwan; Nirmala, R; Kim, Tae Woo; Navamathavan, R; Kim, Hak Yong; Park, Soo Jin

    2016-01-01

    We report on the simple way of obtaining aligned poly(vinylidiene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers by electrospinning process. The collector drum rotation speed was adjusted to prepare well aligned PVDF-HFP nanofibers. The degree of alignment and the orientation of PVDF-HFP nanofibers can be significantly altered by varying the speed of collector drum rotation. The resultant PVDF-HFP nanofibers were systematically characterized. From the scanning electron microscopy data, it was found that the electrospun PVDF-HFP nanofibers were formed with well-aligned nature. The X-ray diffraction results revealed that the electrospun PVDF-HFP nanofibers with β-phase can be formed by the increased collector drum rotation speed. Overall, the collector rotation speed during the electrospinning process plays an important role in obtaining well-aligned and improved characteristics of PVDF-HFP nanofibers.

  16. Electrospun nanofibers of collagen-chitosan and P(LLA-CL) for tissue engineering

    Institute of Scientific and Technical Information of China (English)

    MO Xiumei; CHEN Zonggang; Hans J.Weber

    2007-01-01

    Electrospun nanofibers could be used to mimic the nanofibrous structure of the extracellular matrix (ECM) in native tissue.In tissue engineering,the ECM could be used as tissue engineering scaffold to solve tissue engineering prob-lems.In this paper,poly(L-lactid-co-ε-caprolactone) [P(LLA-CL)] nanofibers and collagen-chitosan complex nanofibers were fabricated by electrospinning.Results of the experi-ments showed that the mechanical properties of the collagen- chitosan complex nanofibers varied with the collagen content in the complex.It was also found that the biodegradability of P(LLA-CL) nanofibers was faster than its membrane and that smooth muscle cells (SMC) grow faster on collagen nanofibers than on P(LLA-CL) nanofibers.

  17. Fabrication and optical properties of Y2O3: Eu3+ nanofibers prepared by electrospinning.

    Science.gov (United States)

    Dong, Guoping; Chi, Yingzhi; Xiao, Xiudi; Liu, Xiaofeng; Qian, Bin; Ma, Zhijun; Wu, E; Zeng, Heping; Chen, Danping; Qiu, Jianrong

    2009-12-07

    Y(2)O(3): Eu(3+) nanofibers with the average diameter of ~300 nm were in situ fabricated by electrospinning. X-ray diffraction (XRD) pattern confirmed that the Y(2)O(3): Eu(3+) nanofibers were composed of pure body-centered cubic (bcc) Y(2)O(3) phase. High-resolution transmission electron microscopy (HRTEM) results indicated that Y(2)O(3): Eu(3+) nanofibers were constituted of nonspherical crystalline grains, and these crystalline grains were orderly arranged along the axial direction of single nanofiber. These Y(2)O(3): Eu(3+) nanofibers showed a partially polarized photoluminescence (PL). The arrangement of crystalline grains and the mismatch of dielectric constant between Y(2)O(3): Eu(3+) nanofiber and its environment probably contributed together to the polarized PL from Y(2)O(3): Eu(3+) nanofiber.

  18. Antibacterial Properties of Titanate Nanofiber Thin Films Formed on a Titanium Plate

    Directory of Open Access Journals (Sweden)

    Mitsunori Yada

    2013-01-01

    Full Text Available A sodium titanate nanofiber thin film and a silver nanoparticle/silver titanate nanofiber thin film formed on the surface of a titanium plate exhibited strong antibacterial activities against methicillin-resistant Staphylococcus aureus, which is one of the major bacteria causing in-hospital infections. Exposure of the sodium titanate nanofiber thin film to ultraviolet rays generated a high antibacterial activity due to photocatalysis and the sodium titanate nanofiber thin film immediately after its synthesis possessed a high antibacterial activity even without exposure to ultraviolet rays. Elution of silver from the silver nanoparticle/silver titanate nanofiber thin film caused by the silver ion exchange reaction was considered to contribute substantially to the strong antibacterial activity. The titanate nanofiber thin films adhered firmly to titanium. Therefore, these titanate nanofiber thin film/titanium composites will be extremely useful as implant materials that have excellent antibacterial activities.

  19. Development of green nanocomposites reinforced by cellulose nanofibers extracted from paper sludge

    Science.gov (United States)

    Takagi, Hitoshi; Nakagaito, Antonio N.; Kusaka, Kazuya; Muneta, Yuya

    2015-03-01

    Cellulose nanofibers have been showing much greater potential to enhance the mechanical and physical properties of polymer-based composite materials. The purpose of this study is to extract the cellulose nanofibers from waste bio-resources; such as waste newspaper and paper sludge. The cellulosic raw materials were treated chemically and physically in order to extract individualized cellulose nanofiber. The combination of acid hydrolysis and following mechanical treatment resulted in the extraction of cellulose nanofibers having diameter of about 40 nm. In order to examine the reinforcing effect of the extracted cellulose nanofibers, fully biodegradable green nanocomposites were fabricated by composing polyvinyl alcohol (PVA) resin with the extracted cellulose nanofibers, and then the tensile tests were conducted. The results showed that the enhancement in mechanical properties was successfully obtained in the cellulose nanofiber/PVA green nanocomposites.

  20. Cold plasma welding of polyaniline nanofibers with enhanced electrical and mechanical properties

    Science.gov (United States)

    Ye, Dong; Yu, Yao; Liu, Lin; Lu, Xinpei; Wu, Yue

    2015-12-01

    Joining conducting polymer (CP) nanofibers into an interconnected porous network can result in good mechanical and electrical contacts between nanofibers that can be beneficial for the high performance of CP-based devices. Here, we demonstrate the cold welding of polyaniline (PAni) nanofiber loose ends with cold plasma. The room-temperature and atmospheric-pressure helium micro-plasma jet launches highly charged ion bullets at a PAni nanofiber target with high precision and the highly charged ion bullet selectively induces field emission at the sharp nanofiber loose ends. This technique joins nanofiber tips without altering the morphology of the film and protonation thus leading to significantly enhanced electrical and mechanical properties. In addition, this technique has high spatial resolution and is able to selectively weld and dope regions of nanofiber film with promising novel device applications.

  1. Development of Bioactive Patch for Maintenance of Implanted Cells at the Myocardial Infarcted Site

    Directory of Open Access Journals (Sweden)

    C. Castells-Sala

    2015-01-01

    Full Text Available Ischemia produced as a result of myocardial infarction might cause moderate or severe tissue death. Studies under development propose grafting stem cells into the affected area and we hypothesize that this mechanism could be enhanced by the application of a “bioactive implant.” The implant herein proposed consists of a thin porous elastomeric membrane, filled with self-assembling nanofibers and human subcutaneous adipose tissue derived progenitor cells. We describe the development and characterization of two elastomeric membranes: poly(ethyl acrylate (PEA and poly(caprolactone 2-(methacryloyloxyethyl ester (PCLMA. Both are a good material support to deliver cells within a soft self-assembling peptide and are elastic enough to withstand the stresses arising from the heartbeat. Both developed composites (PEA and PCLMA, combined with self-assembling peptide equally facilitate the propagation of electrical pulses and maintain their genetic profile of the seeded cells. Preliminary studies with small animal models suggest that, at short times, the bioimplant shows good adhesion with the myocardium. After three days cells loaded in the patch remain alive at the implanted site. We propose that the bioactive patch (elastomeric membranes with self-assembling peptide and cells could increase the efficacy of future cardiac cell therapy by improving cell immobilization and survival at the affected site.

  2. Electrospinning cellulose based nanofibers for sensor applications

    Science.gov (United States)

    Nartker, Steven

    2009-12-01

    Bacterial pathogens have recently become a serious threat to the food and water supply. A biosensor based on an electrochemical immunoassay has been developed for detecting food borne pathogens, such as Escherichia coli (E. coli) O157:H7. These sensors consist of several materials including, cellulose, cellulose nitrate, polyaniline and glass fibers. The current sensors have not been optimized in terms of microscale architecture and materials. The major problem associated with the current sensors is the limited concentration range of pathogens that provides a linear response on the concentration conductivity chart. Electrospinning is a process that can be used to create a patterned fiber mat design that will increase the linear range and lower the detection limit of these sensors by improving the microscale architecture. Using the electrospinning process to produce novel mats of cellulose nitrate will offer improved surface area, and the cellulose nitrate can be treated to further improve chemical interactions required for sensor activity. The macro and micro architecture of the sensor is critical to the performance of the sensors. Electrospinning technology can be used to create patterned architectures of nanofibers that will enhance sensor performance. To date electrospinning of cellulose nitrate has not been performed and optimization of the electrospinning process will provide novel materials suitable for applications such as filtration and sensing. The goal of this research is to identify and elucidate the primary materials and process factors necessary to produce cellulose nitrate nanofibers using the electrospinning process that will improve the performance of biosensors. Cellulose nitrate is readily dissolved in common organic solvents such as acetone, tetrahydrofuran (THF) and N,N dimethylformamide (DMF). These solvents can be mixed with other latent solvents such as ethanol and other alcohols to provide a solvent system with good electrospinning behavior

  3. Fabrication of NiO/zirconium oxide nanofibers by electrospinning.

    Science.gov (United States)

    Sundarrajan, Subramanian; Venkatesan, Arunachalam; Agarwal, Satya R; Ahamed, Nabeela Nasreen Shaik Anwar; Ramakrishna, Seeram

    2014-12-01

    The electrospinning technique has been used to fabricate 1D inorganic-organic composite nanofibers from solutions containing poly(vinyl alcohol) (PVA) and suitable aqueous precursors of nickel and zirconium ions. Upon calcination, nickel oxide/zirconia nanofibers retained the original morphological features of as-spun nanofibers. X-ray diffraction was used to identify the crystalline nature of the final product and analytical tools such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM) were employed to elucidate the pathway of ceramic phase formation and the systematic evolution of morphological features in the as-spun and calcined fibers. These fibers will find potential applications in biomedical field.

  4. Laser-induced charge separation in organic nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Behn, Dino; Kjelstrup-Hansen, Jakob

    -assemble into crystalline nanofibers by vapor deposition onto muscovite mica substrates, and we have recently shown that such nanofibers can be transferred to different substrates by roll-printing and used as the active material in e.g. organic field-effect transistors (OFETs), organic light-emitting transistors (OLETs......Organic semiconductors have unique properties that can be tailored via synthetic chemistry for specific applications, which combined with their low price and straight-forward processing over large areas make them interesting materials for future devices. Certain oligomers can self......), and organic phototransistors (OPTs). However, several device-related issues incl. charge-separation and local band structure remain poorly understood. In this work, we use electrostatic force microscopy (EFM) combined with optical microscopy to study the local surface charge of an individual organic nanofiber...

  5. Laser-induced charge separation in organic nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Behn, Dino; Kjelstrup-Hansen, Jakob

    Organic semiconductors have unique properties that can be tailored via synthetic chemistry for specific applications, which combined with their low price and straight-forward processing over large areas make them interesting materials for future devices. Certain oligomers can self......-assemble into crystalline nanofibers by vapor deposition onto muscovite mica substrates, and we have recently shown that such nanofibers can be transferred to different substrates by roll-printing and used as the active material in e.g. organic field-effect transistors (OFETs), organic light-emitting transistors (OLETs......), and organic phototransistors (OPTs). However, several device-related issues incl. charge-separation and local band structure remain poorly understood. In this work, we use electrostatic force microscopy (EFM) combined with optical microscopy to study the local surface charge of an individual organic nanofiber...

  6. Conductive Behaviors of Carbon Nanofibers Reinforced Epoxy Composites

    Institute of Scientific and Technical Information of China (English)

    MEI Qilin; WANG Jihui; WANG Fuling; HUANG Zhixiong; YANG Xiaolin; WEI Tao

    2008-01-01

    By means of ultrasonic dispersion,carbon nanofibers reinforced epoxy resin composite was prepared in the lab,the electrical conductivity of composite with different carbon nanofibers loadings were studied,also the voltage-current relationship,resistance-temperature properties and mechano-electric effect were investigated.Results show that the resistivity of composite decreases in geometric progression with the increasing of carbon nanofibers,and the threshold ranges between 0.1 wt%-0.2 wt%.The voltage-current relationship is in good conformity with the Ohm's law,both positive temperature coefficient and negative temperature coefficient can be found at elevated temperature.In the course of stretching,the electrical resistance of the composites increases with the stress steadily and changes sharply near the breaking point,which is of importance for the safety monitor and structure health diagnosis.

  7. Giant Thermal Rectification from Polyethylene Nanofiber Thermal Diodes

    CERN Document Server

    Zhang, Teng

    2015-01-01

    The realization of phononic computing is held hostage by the lack of high performance thermal devices. Here we show through theoretical analysis and molecular dynamics simulations that unprecedented thermal rectification factors (as large as 1.20) can be achieved utilizing the phase dependent thermal conductivity of polyethylene nanofibers. More importantly, such high thermal rectifications only need very small temperature differences (< 20 oC) across the device, which is a significant advantage over other thermal diodes which need temperature biases on the order of the operating temperature. Taking this into consideration, we show that the dimensionless temperature-scaled rectification factors of the polymer nanofiber diodes range from 12 to 25 - much larger than other thermal diodes (< 8). The polymer nanofiber thermal diode consists of a crystalline portion whose thermal conductivity is highly phase-sensitive and a cross-linked portion which has a stable phase. Nanoscale size effect can be utilized t...

  8. Properties of Electrospun TiO2 Nanofibers

    Directory of Open Access Journals (Sweden)

    Bianca Caratão

    2014-01-01

    Full Text Available Titanium oxide filled polyvinylpyrrolidone (PVP composite nanofibers have been prepared via a simple electrospinning technique. The combination of good TiO2 properties with its high surface area leads these nanofibers into having a vast applicability such as cosmetics, scaffolds for tissue engineering, catalytic devices, sensors, solar cells, and optoelectronic devices. The structural and chemical properties of the prepared samples have been studied. The presence of the TiO2 phase on the nanofibers was confirmed. An anatase to rutile transformation was observed at 600°C. Regarding the thermogravimetric and differential thermal analysis (TGA/DTA, the TIP decomposition and the PVP evaporation at 225°C were verified.

  9. Uniaxially aligned ceramic nanofibers obtained by chemical mechanical processing

    Energy Technology Data Exchange (ETDEWEB)

    Tararam, R. [Univ Estadual Paulista – UNESP – Instituto de Química, Rua Prof. Francisco Degni n° 55, CEP 14800-900 Araraquara, SP (Brazil); Foschini, C.R. [Univ Estadual Paulista – UNESP – Faculdade de Engenharia de Bauru, Dept. de Eng. Mecanica, Av. Eng. Luiz Edmundo C. Coube 14-01, CEP 17033-360 Bauru, SP (Brazil); Destro, F.B. [Univ Estadual Paulista – UNESP – Faculdade de Engenharia de Guaratinguetá, Guaratinguetá 12516-410, SP (Brazil); Simões, A.Z., E-mail: alezipo@yahoo.com [Univ Estadual Paulista – UNESP – Faculdade de Engenharia de Guaratinguetá, Guaratinguetá 12516-410, SP (Brazil); Longo, E.; Varela, J.A. [Univ Estadual Paulista – UNESP – Instituto de Química, Rua Prof. Francisco Degni n° 55, CEP 14800-900 Araraquara, SP (Brazil)

    2014-08-01

    For this study, we investigated a simple method to generate well aligned nanofibers over large areas using an organic polymer stretched over the substrate surface With this method, ZnO and CuO 3D parallel nanowire arrays were successfully prepared by calcinations of the polymer fibers. X-ray diffraction (XRD) analysis revealed that the copper oxide has a monoclinic structure while the zinc oxide has a hexagonal structure. Scanning electron microscopy (SEM) analysis showed ceramic nanofibers with an average diameter of 120 nm which were composed of small nanoparticles which are 10 nm in diameter. The ability to obtain uniaxially aligned nanofibers reveals a range of interesting properties with potential applications for sensors, catalysts and energy technologies.

  10. Electrochemical characteristics of activated carbon nanofiber electrodes for supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Min-Kang [Dept. of Chemistry, Inha University, 253, Nam-gu, Incheon 402-751 (Korea, Republic of); Park, Soo-Jin [Dept. of Chemistry, Inha University, 253, Nam-gu, Incheon 402-751 (Korea, Republic of)], E-mail: sjpark@inha.ac.kr

    2009-08-25

    In this work, poly(amide imide) solutions in dimethylformamide were electrospun into webs consisting of 350 nm ultrafine nanofibers. These nanofiber webs were used to produce activated carbon nanofibers (ACNFs), through stabilization and carbonisation-activation processes. Experimental results indicated that ACNFs activated at 800 deg. C afforded the highest specific surface area but low mesopore volume. The high specific surface area, mainly due to the micropores, introduced maximum specific capacitance at low current density (150 F g{sup -1} at 10 mA g{sup -1}). Elevating the volume fraction of mesopores gave maximum specific capacitance at high current density (100 F g{sup -1} at 1000 mA g{sup -1}), which could be explained on the basis of ion mobility in the pores. Thus, the capacitance of the supercapacitors was strongly dependent on the specific surface area and micro- or mesopore volume of the ACNFs.

  11. Phase diagram of hopping conduction mechanisms in polymer nanofiber network

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jeng-Ting; Lu, Yu-Cheng; Jiang, Shiau-Bin; Zhong, Yuan-Liang, E-mail: ylzhong@cycu.edu.tw [Department of Physics and Center for Nanotechnology, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Yeh, Jui-Ming [Department of Chemistry and Center for Nanotechnology, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China)

    2015-12-07

    Network formation by nanofiber crosslinking is usually in polymer materials as application in organic semiconductor devices. Electron hopping transport mechanisms depend on polymer morphology in network. Conducting polymers morphology in a random network structure is modeled by a quasi-one-dimensional system coupled of chains or fibers. We observe the varying hopping conduction mechanisms in the polyaniline nanofibers of the random network structure. The average diameter d of the nanofibers is varied from approximately 10 to 100 nm. The different dominant hopping mechanisms including Efros-Shklovskii variable-range hopping (VRH), Mott VRH, and nearest-neighbor hopping are dependent on temperature range and d in crossover changes. The result of this study is first presented in a phase diagram of hopping conduction mechanisms based on the theories of the random network model. The hopping conduction mechanism is unlike in normal semiconductor materials.

  12. Interfacial engineering of carbon nanofiber-graphene-carbon nanofiber heterojunctions in flexible lightweight electromagnetic shielding networks.

    Science.gov (United States)

    Song, Wei-Li; Wang, Jia; Fan, Li-Zhen; Li, Yong; Wang, Chan-Yuan; Cao, Mao-Sheng

    2014-07-09

    Lightweight carbon materials of effective electromagnetic interference (EMI) shielding have attracted increasing interest because of rapid development of smart communication devices. To meet the requirement in portable electronic devices, flexible shielding materials with ultrathin characteristic have been pursued for this purpose. In this work, we demonstrated a facile strategy for scalable fabrication of flexible all-carbon networks, where the insulting polymeric frames and interfaces have been well eliminated. Microscopically, a novel carbon nanofiber-graphene nanosheet-carbon nanofiber (CNF-GN-CNF) heterojunction, which plays the dominant role as the interfacial modifier, has been observed in the as-fabricated networks. With the presence of CNF-GN-CNF heterojunctions, the all-carbon networks exhibit much increased electrical properties, resulting in the great enhancement of EMI shielding performance. The related mechanism for engineering the CNF interfaces based on the CNF-GN-CNF heterojunctions has been discussed. Implication of the results suggests that the lightweight all-carbon networks, whose thickness and density are much smaller than other graphene/polymer composites, present more promising potential as thin shielding materials in flexible portable electronics.

  13. Bioactive Egg Components and Inflammation.

    Science.gov (United States)

    Andersen, Catherine J

    2015-09-16

    Inflammation is a normal acute response of the immune system to pathogens and tissue injury. However, chronic inflammation is known to play a significant role in the pathophysiology of numerous chronic diseases, such as cardiovascular disease, type 2 diabetes mellitus, and cancer. Thus, the impact of dietary factors on inflammation may provide key insight into mitigating chronic disease risk. Eggs are recognized as a functional food that contain a variety of bioactive compounds that can influence pro- and anti-inflammatory pathways. Interestingly, the effects of egg consumption on inflammation varies across different populations, including those that are classified as healthy, overweight, metabolic syndrome, and type 2 diabetic. The following review will discuss the pro- and anti-inflammatory properties of egg components, with a focus on egg phospholipids, cholesterol, the carotenoids lutein and zeaxanthin, and bioactive proteins. The effects of egg consumption of inflammation across human populations will additionally be presented. Together, these findings have implications for population-specific dietary recommendations and chronic disease risk.

  14. Bioactive Egg Components and Inflammation

    Directory of Open Access Journals (Sweden)

    Catherine J. Andersen

    2015-09-01

    Full Text Available Inflammation is a normal acute response of the immune system to pathogens and tissue injury. However, chronic inflammation is known to play a significant role in the pathophysiology of numerous chronic diseases, such as cardiovascular disease, type 2 diabetes mellitus, and cancer. Thus, the impact of dietary factors on inflammation may provide key insight into mitigating chronic disease risk. Eggs are recognized as a functional food that contain a variety of bioactive compounds that can influence pro- and anti-inflammatory pathways. Interestingly, the effects of egg consumption on inflammation varies across different populations, including those that are classified as healthy, overweight, metabolic syndrome, and type 2 diabetic. The following review will discuss the pro- and anti-inflammatory properties of egg components, with a focus on egg phospholipids, cholesterol, the carotenoids lutein and zeaxanthin, and bioactive proteins. The effects of egg consumption of inflammation across human populations will additionally be presented. Together, these findings have implications for population-specific dietary recommendations and chronic disease risk.

  15. Bioactive Components in Fish Venoms

    Science.gov (United States)

    Ziegman, Rebekah; Alewood, Paul

    2015-01-01

    Animal venoms are widely recognized excellent resources for the discovery of novel drug leads and physiological tools. Most are comprised of a large number of components, of which the enzymes, small peptides, and proteins are studied for their important bioactivities. However, in spite of there being over 2000 venomous fish species, piscine venoms have been relatively underrepresented in the literature thus far. Most studies have explored whole or partially fractioned venom, revealing broad pharmacology, which includes cardiovascular, neuromuscular, cytotoxic, inflammatory, and nociceptive activities. Several large proteinaceous toxins, such as stonustoxin, verrucotoxin, and Sp-CTx, have been isolated from scorpaenoid fish. These form pores in cell membranes, resulting in cell death and creating a cascade of reactions that result in many, but not all, of the physiological symptoms observed from envenomation. Additionally, Natterins, a novel family of toxins possessing kininogenase activity have been found in toadfish venom. A variety of smaller protein toxins, as well as a small number of peptides, enzymes, and non-proteinaceous molecules have also been isolated from a range of fish venoms, but most remain poorly characterized. Many other bioactive fish venom components remain to be discovered and investigated. These represent an untapped treasure of potentially useful molecules. PMID:25941767

  16. Morphology and internal structure of polymeric and carbon nanofibers

    Science.gov (United States)

    Zhong, Zhenxin

    Evaporation and the associated solidification are important factors that affect the diameter of electrospun nanofibers. The evaporation and solidification of a charged jet were controlled by varying the partial pressure of water vapor during electrospinning of poly(ethylene oxide) from aqueous solution. As the partial pressure of water vapor increases, the solidification process of the charged jet becomes slower, allowing elongation of the charged jet to continue longer and thereby to form thinner fibers. The morphology and internal structure of electrospun poly(vinylidene fluorides) nanofibers were investigated. Low voltage high resolution scanning electron microscopy was used to study the surface of electrospun nanofibers. Control of electrospinning process produced fibers with various morphological forms. Fibers that were beaded, branched, or split were obtained when different instabilities dominated in the electrospinning process. The high ratio of stretching during electrospinning aligns the polymer molecules along the fiber axis. A rapid evaporation of solvent during electrospinning gives fibers with small and imperfect crystallites. These can be perfected by thermal annealing. Fibers annealed at elevated temperature form plate-like lamellar crystals tightly linked by tie molecules. Electrospinning can provide ultrafine nanofibers with cross-sections that contain only a few polymer molecules. Ultrafine polymer nanofibers are extremely stable in transmission electron microscope. Electrospun nanofibers suspended on a holey carbon film showed features of individual polymer molecules. Carbon fibers with diameters ranging from 100 nm to several microns were produced from mesophase pitch by a low cost gas jet process. The structure of mesophase pitch-based carbon fibers was investigated as a function of heat treatment temperatures. Submicron-sized graphene oxide flakes were prepared by a combination of oxidative treatment and ultrasonic radiation. Because pitch is

  17. Advances in Poly(4-aminodiphenylaniline) Nanofibers Preparation by Electrospinning Technique.

    Science.gov (United States)

    Della Pina, C; Busacca, C; Frontera, P; Antonucci, P L; Scarpino, L A; Sironi, A; Falletta, E

    2016-05-01

    Polyaniline (PANI) nanofibers are drawing a great deal of interest from academia and industry due to their multiple applications, especially in biomedical field. PANI nanofibers were successfully electrospun for the first time by MacDiarmid and co-workers at the beginning of the millennium and since then many efforts have been addressed to improve their quality. However, traditional PANI prepared from aniline monomer shows some drawbacks, such as presence of toxic (i.e., benzidine) and inorganic (salts and metals) co-products, that complicate polymer post-treatment, and low solubility in common organic solvents, making hard its processing by electrospinning technique. Some industrial sectors, such as medical and biomedical, need to employ materials free from toxic and polluting species. In this regard, the oxidative polymerization of N-(4-aminophenyl)aniline, aniline dimer, to produce poly(4-aminodiphenylaniline), P4ADA, a kind of PANI, represents an innovative alternative to the traditional synthesis because the obtained polymer results free from carcinogenic and/or polluting co-products, and, moreover, more soluble than traditional PANI. This latter feature can be exploited to obtain P4ADA nanofibers by electrospinning technique. In this paper we report the advances obtained in the P4ADA nanofibers electrospinnig. A comparison among polyethylene oxide (PEO), polymethyl methacrylate (PMMA) and polystyrene (PS), as the second polymer to facilitate the electrospinning process, is shown. In order to increase the conductivity of P4ADA nanofibers, two strategies were adopted and compared: selective insulating binder removal from electrospun nanofibers by a rinsing tratment, afterwards optimizing the minimum amount of binder necessary for the electrospinning process. Moreover, the effect of PEO/P4ADA weight ratio on the fibers morphology and conductivity was highlighted.

  18. Stability of β-carotene in polyethylene oxide electrospun nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Peinado, I., E-mail: irpeipar@upvnet.upv.es [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Mason, M.; Romano, A. [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Biasioli, F. [Department of Food Quality and Nutrition, Research and Innovation Centre, Fondazione Edmund Mach (FEM), via E. Mach 1, 38010 San Michele all ‘Adige, TN (Italy); Scampicchio, M., E-mail: matteo.scampicchio@unibz.it [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy)

    2016-05-01

    Highlights: • β-carotene was incorporated into PEO-nanofibers by electrospinning. • Properties of the fibers were analyzed by SEM, color analysis, and DSC. • TGA coupled to PTR–ms resulted promising to online-monitoring thermal degradation. • Thermal stability of βc increased after encapsulation into the PEO-nanofibers. - Abstract: β-carotene (βc) was successfully incorporated into electrospun nanofibers of poly-(ethylene oxide) (PEO) with the aim of prolonging its shelf life and thermal stability. The physical and thermal properties of the βc-PEO-nanofibers were determined by scanning electron microscopy (SEM), color analysis, and differential scanning calorimetry (DSC). The nanofibers of PEO and βc-PEO exhibited average fiber diameters of 320 ± 46 and 230 ± 21 nm, with colorimetric coordinates L* = 95.7 ± 2.4 and 89.4 ± 4.6 and b* = −0.5 ± 0.1 and 6.2 ± 3.0 respectively. Thermogravimetric analysis coupled with Proton Transfer–Mass Spectroscopy (TGA/PTR–ms) demonstrated that coated βc inside PEO nanofibers increased thermal stability when compared to standard βc in powder form. In addition, β-carotene in the membranes showed higher stability during storage when compared with β-carotene in solution with a decrease in concentration of 57 ± 4% and 70 ± 2% respectively, thus should extend the shelf life of this compound. Also, TGA coupled with PTR–MS resulted in a promising technique to online-monitoring thermal degradation.

  19. Bioactive Glasses in Dentistry: A Review

    Directory of Open Access Journals (Sweden)

    Abbasi Z

    2015-03-01

    Full Text Available Bioactive glasses are silicate-based and can form a strong chemical bond with the tissues. These biomaterials are highly biocompatible and can form a hydroxyapatite layer when implanted in the body or soaked in the simulated body fluid. Due to several disadvantages, conventional glass processing method including melting of glass components, is replaced by sol-gel method with a large number of benefits such as low processing temperature, higher purity and homogeneity and therefore better control of bioactivity. Bioactive glasses have a wide range of applications, particularly in dentistry. These glasses can be used as particulates or monolithic shapes and porous or dense constructs in different applications such as remineralization or hypersensitivity treatment. Some properties of bioactive glasses such as antibacterial properties can be promoted by adding different elements into the glass. Bioactive glasses can also be used to modify different biocompatible materials that need to be bioactive. This study reviews the significant developments of bioactive glasses in clinical application, especially dentistry. Furthermore, we will discuss the field of bioactive glasses from beginning to the current developments, which includes processing methods, applications, and properties of these glasses.

  20. An optical nanofiber-based interface for single molecules

    CERN Document Server

    Skoff, Sarah M; Schauffert, Hardy; Rauschenbeutel, Arno

    2016-01-01

    Optical interfaces for quantum emitters are a prerequisite for implementing quantum networks. Here, we couple single molecules to the guided modes of an optical nanofiber. The molecules are embedded within a crystal that provides photostability and due to its inhomogeneous environment, a means to spectrally address single molecules. Single molecules are excited and detected solely via the nanofiber interface without the requirement of additional optical access. In this way, we realize a fully fiber-integrated system that is scalable and may become a versatile constituent for quantum hybrid systems.

  1. CONFORMATION AND MICROSTRUCTURE OF CARBON NANOFIBERS DEPOSITED ON FOAM Ni

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Bundles of pure carbon nanofibers were prepared by catalytic decomposition of acetylene on foam Ni. The morphological and structural characteristics of the carbon nanostructures, in the as-prepared state, were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HTEM). A special conformation of carbon nanofibers composed of segmented structures was found among the products by both SEM and TEM observations. Further HTEM ex amination indicated that the segments were stacked with well ordered graphite platelets arranged perpendicular to the axis of the filaments.

  2. Nanofibers Offer Alternative Ways to the Treatment of Skin Infections

    Directory of Open Access Journals (Sweden)

    T. D. J. Heunis

    2010-01-01

    Full Text Available Injury to the skin causes a breach in the protective layer surrounding the body. Many pathogens are resistant to antibiotics, rendering conventional treatment less effective. This led to the use of alternative antimicrobial compounds, such as silver ions, in skin treatment. In this review nanofibers, and the incorporation of natural antimicrobial compounds in these scaffolds, are discussed as an alternative way to control skin infections. Electrospinning as a technique to prepare nanofibers is discussed. The possibility of using these structures as drug delivery systems is investigated.

  3. Dispersive Optical Interface Based on Nanofiber-Trapped Atoms

    CERN Document Server

    Dawkins, S T; Reitz, D; Vetsch, E; Rauschenbeutel, A

    2011-01-01

    We dispersively interface an ensemble of one thousand atoms trapped in the evanescent field surrounding a tapered optical nanofiber. This method relies on the azimuthally-asymmetric coupling of the ensemble with the evanescent field of an off-resonant probe beam, transmitted through the nanofiber. The resulting birefringence and dispersion are significant; we observe a phase shift per atom of $\\sim$\\,1\\,mrad at a detuning of six times the natural linewidth, corresponding to an effective resonant optical density per atom of 2.7\\,%. Moreover, we utilize this strong dispersion to non-destructively determine the number of atoms.

  4. Field-enhanced nonlinear optical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kostiučenko, Oksana; Fiutowski, Jacek; Brewer, Jonathan R.;

    Second harmonic generation in nonlinearly optically active organic nanofibers, generated via self-assembled surface growth from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules, has been investigated. After the growth on mica templates, nanofibers have been transferred onto...... lithographically defined regular arrays of metal and dielectric nanostructures. Such hybrid systems were employed to correlate the second harmonic response to both morphology of the fibers i.e. local field enhancement due to local changes in the fiber’s morphology and field enhancement effects appearing...

  5. Field-enhanced nonlinear optical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kostiučenko, Oksana; Fiutowski, Jacek; Brewer, Jonathan R.;

    2014-01-01

    Second harmonic generation in nonlinearly optically active organic nanofibers, generated via self-assembled surface growth from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules, has been investigated. After the growth on mica templates, nanofibers have been transferred onto...... lithographically defined regular arrays of metal and dielectric nanostructures. Such hybrid systems were employed to correlate the second harmonic response to both morphology of the fibers i.e. local field enhancement due to local changes in the fiber’s morphology and field enhancement effects appearing...

  6. CHARACTERIZATION AND ADSORPTION PROPERTIES OF POROUS CARBON NANOFIBER GRANULES

    Institute of Scientific and Technical Information of China (English)

    Jiuling Chen; Qinghai Chen; Yongdan Li

    2006-01-01

    The properties of the porous granules produced by agglomeration of catalytically grown carbon nanofibers were investigated in this work. The single pellet crushing strength of the granules is high, e.g., 1.6-2.5 MPa. They have adsorption at 298 K of benzene or phenol on the granules is much lower than that on activated carbon and depends not only on the specific surface area of the carbon material but also on the sewing structure of the granules and the morphology of the carbon nanofibers. Treatment in dilute nitric acid appreciably reduces such adsorption.

  7. Local field enhanced second-harmonic response of organic nanofibers

    DEFF Research Database (Denmark)

    Leißner, Till; Kostiučenko, Oksana; Fiutowski, Jacek

    Organic CNHP4 nanofibers showing a strong second-harmonic (SH) response have been successfully implemented as active components in a metal-organic hybrid system. Using nondestructive roll-on transfer technique nanofibers were transferred from the growing mica substrates onto electron......-beam lithography-defined regular arrays of gold, titanium and silicon oxide. As shown in a femtosecond laser scanning microscopy study the fiber-substrate interplay leads (only) on gold to a significantly enhanced SH signal. We suggest that this effect is driven by the local field enhancement i.e. the excitation...

  8. The effect of DNA on mechanical properties of nanofiber hydrogels

    Science.gov (United States)

    Shin, Min Kyoon; Kim, Shi Hyeong; Jung, Sung-il; Kim, Sun I.; Kim, Seon Jeong; Kim, Byung Joo; So, Insuk

    2008-10-01

    Uniform poly(vinyl alcohol) (PVA) nanofiber gels incorporating double-stranded deoxyribonucleic acid (DNA) were fabricated without the aid of cross-linkers employing electrospinning. Creep and tensile tests of the DNA/PVA nanofiber gels were carried out in an aqueous medium to analyze interactions between the DNA and PVA. The DNA/PVA gels had a higher elastic modulus than the PVA gel. The viscosity with increasing external load was calculated by applying the Burger model to the creep curves. We conclude that DNA is relatively weakly bound with the PVA chains, although the elastic modulus of the DNA/PVA gels was higher than that of PVA gel.

  9. Engineered Polymer Composites Through Electrospun Nanofiber Coating of Fiber Tows

    Science.gov (United States)

    Kohlman, Lee W.; Bakis, Charles; Williams, Tiffany S.; Johnston, James C.; Kuczmarski, Maria A.; Roberts, Gary D.

    2014-01-01

    Composite materials offer significant weight savings in many aerospace applications. The toughness of the interface of fibers crossing at different angles often determines failure of composite components. A method for toughening the interface in fabric and filament wound components using directly electrospun thermoplastic nanofiber on carbon fiber tow is presented. The method was first demonstrated with limited trials, and then was scaled up to a continuous lab scale process. Filament wound tubes were fabricated and tested using unmodified baseline towpreg material and nanofiber coated towpreg.

  10. Nb2O5 nanofiber memristor

    Science.gov (United States)

    Grishin, A. M.; Velichko, A. A.; Jalalian, A.

    2013-07-01

    Non-woven bead-free 100 μm long and 80-200 nm in diameter highly crystalline orthorhombic T-Nb2O5 nanofibers were sintered by sol-gel assisted electrospinning technique. Electrical and dielectric spectroscopy tests of individual fibers clamped onto Pt coated Si substrate were performed using a spreading resistance mode of atomic force microscope. Reproducible resistive switching with ON-OFF resistance ratio as high as 2 × 104 has a bipolar character, starts with a threshold voltage of 0.8-1.7 V, and follows by continuous growth of conductivity. Resistive memory effect is associated with a voltage-driven accumulation/depletion of oxygen vacancies at Nb2O5/Pt cathode interface. Poole-Frenkel emission from the electronic states trapped at reduced NbOx complexes determines a shape of Nb2O5/Pt diode I-V characteristics. Simple thermodynamic model explains a threshold character of switching, relates experimentally observed characteristics in low and high resistive states, and gives a reasonable estimate of the concentration of oxygen vacancies.

  11. Radiation Effects on Polypropylene Carbon Nanofibers

    Science.gov (United States)

    Hamilton, John; Mion, Thomas; Chipara, Alin C.; Ibrahim, Elamin I.; Lozano, Karen; Chipara, Magdalena; Tidrow, Steven C.; Chipara, Mircea

    2010-03-01

    Dispersion of carbon nanostructures within polymeric matrices affects most physical and chemical properties of the polymeric matrix (increased Young modulus, improved thermal stability, faster crystallization rates, higher equilibrium degree of crystallinity, modified glass, melting, and crystallization temperatures, enhanced thermal and electrical conductivity). Such changes have been reported and explained by thorough spectroscopic investigations. Nevertheless, little is known about the radiation stability of such nanocomposites. The research is focused on spectroscopic investigations of radiation-induced modifications in isotactic polypropylene (iPP)-vapor grown nanofiber (VGCNF)composites. VGCNF were dispersed within iPP by extrusion at 180^oC. Composites containing various amounts of VGCNFs ranging from 0 to 20 % wt. were prepared and subjected to gamma irradiation, at room temperature, at various integral doses (10 MGy, 20 MGy, and 30 MGy). Raman spectroscopy, ATR, and WAXS were used to assess the radiation-induced modifications in these nanocomposites. Acknowledgements: This research was supported by the Welch Foundation (Department of Chemistry at UTPA) and by US Army Research Office (AMSRD-ARL-RO-SI: 54498-MS-ISP).

  12. Carbon Nanofiber Nanoelectrodes for Biosensing Applications

    Science.gov (United States)

    Koehne, Jessica Erin

    2014-01-01

    A sensor platform based on vertically aligned carbon nanofibers (CNFs) has been developed. Their inherent nanometer scale, high conductivity, wide potential window, good biocompatibility and well-defined surface chemistry make them ideal candidates as biosensor electrodes. Here, we report two studies using vertically aligned CNF nanoelectrodes for biomedical applications. CNF arrays are investigated as neural stimulation and neurotransmitter recording electrodes for application in deep brain stimulation (DBS). Polypyrrole coated CNF nanoelectrodes have shown great promise as stimulating electrodes due to their large surface area, low impedance, biocompatibility and capacity for highly localized stimulation. CNFs embedded in SiO2 have been used as sensing electrodes for neurotransmitter detection. Our approach combines a multiplexed CNF electrode chip, developed at NASA Ames Research Center, with the Wireless Instantaneous Neurotransmitter Concentration Sensor (WINCS) system, developed at the Mayo Clinic. Preliminary results indicate that the CNF nanoelectrode arrays are easily integrated with WINCS for neurotransmitter detection in a multiplexed array format. In the future, combining CNF based stimulating and recording electrodes with WINCS may lay the foundation for an implantable smart therapeutic system that utilizes neurochemical feedback control while likely resulting in increased DBS application in various neuropsychiatric disorders. In total, our goal is to take advantage of the nanostructure of CNF arrays for biosensing studies requiring ultrahigh sensitivity, high-degree of miniaturization, and selective biofunctionalization.

  13. Laser cladding of bioactive glass coatings.

    Science.gov (United States)

    Comesaña, R; Quintero, F; Lusquiños, F; Pascual, M J; Boutinguiza, M; Durán, A; Pou, J

    2010-03-01

    Laser cladding by powder injection has been used to produce bioactive glass coatings on titanium alloy (Ti6Al4V) substrates. Bioactive glass compositions alternative to 45S5 Bioglass were demonstrated to exhibit a gradual wetting angle-temperature evolution and therefore a more homogeneous deposition of the coating over the substrate was achieved. Among the different compositions studied, the S520 bioactive glass showed smoother wetting angle-temperature behavior and was successfully used as precursor material to produce bioactive coatings. Coatings processed using a Nd:YAG laser presented calcium silicate crystallization at the surface, with a uniform composition along the coating cross-section, and no significant dilution of the titanium alloy was observed. These coatings maintain similar bioactivity to that of the precursor material as demonstrated by immersion in simulated body fluid. Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  14. Designing the Instructional Interface.

    Science.gov (United States)

    Lohr, L. L.

    2000-01-01

    Designing the instructional interface is a challenging endeavor requiring knowledge and skills in instructional and visual design, psychology, human-factors, ergonomic research, computer science, and editorial design. This paper describes the instructional interface, the challenges of its development, and an instructional systems approach to its…

  15. Surface modification of bioactive glasses and preparation of PDLLA/bioactive glass composite films.

    Science.gov (United States)

    Gao, Yuan; Chang, Jiang

    2009-08-01

    In order to improve the homogeneous dispersion of particles in the polymeric matrix, 45S5, mesoporous 58S, and 58S bioactive glasses were surface modified by esterification reactions with dodecyl alcohol at reflux temperature of 260 degrees C (named as m-45S5, m-mesoporous 58S, and m-58S, respectively). The modified particles showed better hydrophobicity and longer time of suspension in organic matrix. The PDLLA/bioactive glass composite films were fabricated using surface modified bioactive glass particles through solvent casting-evaporation method. Surface morphology, mechanical property, and bioactivity were investigated. The results revealed that the inorganic particle distribution and tensile strength of the composite films with modified bioactive glass particles were significantly improved while great bioactive properties were maintained. Scanning electron microscopy (SEM) observation illustrated that the modified bioactive glass particles were homogeneously dispersed in the PDLLA matrix. The maximum tensile strengths of composite films with modified bioactive glass particles were higher than that of composite films with unmodified bioactive glass particles. The bioactivity of the composite films were evaluated by being soaked in the simulated body fluid (SBF) and the SEM observation of the films suggested that the modified composite films were still bioactive in that they could induce the formation of HAp on its surface and the distribution of HAp was even more homogeneous on the film. The results mentioned above indicated that the surface modification of bioactive glasses with dodecyl alcohol was an effective method to prepare PDLLA/bioactive glass composites with enhanced properties. By studying the comparisons of modification effects among the three types of bioactive glasses, we could get the conclusion that the size and morphology of the inorganic particles would greatly affect the modification effects and the properties of composites.

  16. Surface modification of polyvinyl alcohol/malonic acid nanofibers by gaseous dielectric barrier discharge plasma for glucose oxidase immobilization

    Science.gov (United States)

    Afshari, Esmail; Mazinani, Saeedeh; Ranaei-Siadat, Seyed-Omid; Ghomi, Hamid

    2016-11-01

    Polymeric nanofiber prepares a suitable situation for enzyme immobilization for variety of applications. In this research, we have fabricated polyvinyl alcohol (PVA)/malonic acid nanofibers using electrospinning. After fabrication of nanofibers, the effect of air, nitrogen, CO2, and argon DBD (dielectric barrier discharge) plasmas on PVA/malonic acid nanofibers were analysed. Among them, air plasma had the most significant effect on glucose oxidase (GOx) immobilization. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrum analysis and X-ray photoelectron spectroscopy (XPS) results revealed that in case of air plasma modified nanofibers, the carboxyl groups on the surface are increased. The scanning electron microscopy (SEM) images showed that, after GOx immobilization, the modified nanofibers with plasma has retained its nanofiber structure. Finally, we analysed reusability and storage stability of GOx immobilized on plasma modified and unmodified nanofibers. The results were more satisfactory for modified nanofibers with respect to unmodified ones.

  17. Aligned Nanofibers for Regenerating Arteries, Nerves, and Muscles

    Science.gov (United States)

    McClendon, Mark Trosper

    Cells are the fundamental unit of the human body, and therefore the ability to control cell behavior is the most important challenge in regenerative medicine. Peptides are the language of biology which is why synthetic peptide amphiphile (PA) molecules hold great potential as a biomaterial. The work presented in this dissertation explores a variety of liquid crystalline PA nanofibers as a means for directing cell growth. Shaping the alignment of these nanofiber networks requires a deep understanding of their rheological properties which presents a difficult challenge as they exist in complex solid and liquid environments. Using PA molecules that self-assemble into high aspect ratio nanofibers and liquid crystalline solutions, this work investigates the influence of shear flow on macroscopic and microscopic nanofiber alignment. To this end, a shear force applied to PA solutions was systematically varied while the alignment was probed using small angle x-ray scattering. Nanofibers were found to respond to shear flow by aligning parallel to the flow direction. By changing pH and PA chemical sequence it was observed that increasing the interfiber electrostatic repulsive interactions resulted in a greater dependence on shear rate. Nanofiber solutions having greater repulsion did not drastically increase in alignment when the applied strain was increased by two orders of magnitude (1 s -1 to 100 s-1), while solutions with nanofibers having less repulsion increased there alignment four fold with the same strain increase. say exactly what you mean by resulted in greater dependence: did it result in fibers aligning under lower shear rates or higher rates--give the results Anionic PA solutions typically used to encapsulate living cells at neutral pH were found to require minimal shear rates, Histological and behavioral observations confirmed that PA implants sustained regeneration rates comparable to autologous grafts and significantly better than empty biopolymer grafts

  18. Preparation of Nanofibrous Structure of Mesoporous Bioactive Glass Microbeads for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Shiao-Wen Tsai

    2016-06-01

    Full Text Available A highly ordered, mesoporous (pore size 2~50 nm bioactive glass (MBG structure has a greater surface area and pore volume and excellent bone-forming bioactivity compared with traditional bioactive glasses (BGs. Hence, MBGs have been used in drug delivery and bone tissue engineering. MBGs can be developed as either a dense or porous block. Compared with a block, microbeads provide greater flexibility for filling different-shaped cavities and are suitable for culturing cells in vitro. In contrast, the fibrous structure of a scaffold has been shown to increase cell attachment and differentiation due to its ability to mimic the three-dimensional structure of natural extracellular matrices. Hence, the aim of this study is to fabricate MBG microbeads with a fibrous structure. First, a sol-gel/electrospinning technique was utilized to fabricate the MBG nanofiber (MBGNF structure. Subsequently, the MBGNF microbeads (MFBs were produced by an electrospraying technology. The results show that the diameter of the MFBs decreases when the applied voltage increases. The drug loading and release profiles and mechanisms of the MFBs were also evaluated. MFBs had a better drug entrapment efficiency, could reduce the burst release of tetracycline, and sustain the release over 10 days. Hence, the MFBs may be suitable drug carriers. In addition, the cellular attachment of MG63 osteoblast-like cells is significantly higher for MFBs than for glass microbeads after culturing for 4 h. The nanofibrous structure of MFBs could provide an appropriate environment for cellular spreading. Therefore, MFBs have great potential for use as a bone graft material in bone tissue engineering applications.

  19. Lysozyme-immobilized electrospun PAMA/PVA and PSSA-MA/PVA ion-exchange nanofiber for wound healing.

    Science.gov (United States)

    Tonglairoum, Prasopchai; Ngawhirunpat, Tanasait; Rojanarata, Theerasak; Opanasopit, Praneet

    2014-08-27

    Abstract This research was aimed to develop the lysozyme immobilized ion-exchange nanofiber mats for wound healing. To promote the healing process, the PSSA-MA/PVA and PAMA ion-exchange nanofiber mats were fabricated to mimic the extracellular matrix structure using electrospinning process followed by thermally crosslinked. Lysozyme was immobilized on the ion-exchane nanofibers by an adsorption method. The ion-exchange nanofibers were investigated using SEM, FTIR and XRPD. Moreover, the lysozyme-immobilized ion-exchange nanofibers were further investigated for lysozyme content and activity, lysozyme release and wound healing activity. The fiber diameters of the mats were in the nanometer range. Lysozyme was gradually absorbed into the PSSA-MA/PVA nanofiber with higher extend than that is absorbed on the PAMA/PVA nanofiber and exhibited higher activity than lysozyme-immobilized PAMA/PVA nanofiber. The total contents of lysozyme on the PSSA-MA/PVA and PAMA/PVA nanofiber were 648 and 166 µg/g, respectively. FTIR and lysozyme activity results confirmed the presence of lysozyme on the nanofiber mats. The lysozyme was released from the PSSA-MA/PVA and PAMA/PVA nanofiber in the same manner. The lysozyme-immobilized PSSA-MA/PVA nanofiber mats and lysozyme-immobilized PAMA/PVA nanofiber mats exhibited significantly faster healing rate than gauze and similar to the commercial antibacterial gauze dressing. These results suggest that these nanofiber mats could provide the promising candidate for wound healing application.

  20. Preparation of Ag/HBP/PAN Nanofiber Web and Its Antimicrobial and Filtration Property

    Directory of Open Access Journals (Sweden)

    Li-Rong Yao

    2016-01-01

    Full Text Available To widen the application of nanofibers web in the field of medical health materials, a new Ag/amino-terminated hyperbranched polymer (HBP/polyacrylonitrile (PAN nanofiber web with excellent antimicrobial activity and filtration property was produced with Ag/HBP dispersion solution and PAN nanofiber. Ag/HBP dispersion solution was prepared with HBP as reducer and stabilizer, and Ag/HBP/PAN nanofiber was prepared by modifying electrospun PAN nanofiber with Ag/HBP aqueous solution. The characterization results showed that spherical Ag nanoparticles were prepared and they had a narrow distribution in HBP aqueous solution. The results of Ag/HBP/PAN nanofiber characterized with SEM and EDS showed that the content of silver nanoparticles on the surface of PAN nanofiber was on the increase when the treating temperature rose. The bacterial reduction rates of HBP-treated PAN nanofiber against S. aureus and E. coli were about 89%, while those of the Ag/HBP/PAN nanofiber against S. aureus and E. coli were 99.9% and 99.96%, respectively, due to the cooperative effects from the amino groups in HBP and Ag nanoparticles. Moreover, the small pores and high porosity in Ag/HBP/PAN nanofiber web resulted in high filtration efficiency (99.9% for removing smaller particles (0.1 μm~0.7 μm, which was much higher than that of the gauze mask.

  1. Influence of polyvinyl alcohol amount on producing in situ photo-crosslinked thioamide functionalized nanofiber membranes

    Directory of Open Access Journals (Sweden)

    Zeytuncu Bihter

    2015-01-01

    Full Text Available Poly(vinyl alcohol/maleic anhydride/acryloyl thioamide monomer (PVA/MA/ATM photo-cured nanofiber membranes and pure PVA nanofiber membranes were produced by electrospinning technique. In situ UV radiation was applied during the electrospinning in order to provide polymerization during the jet flight and promote crosslinking of ATM and MA with PVA. The cross-linking was examined by Fourier-transform infrared spectroscopy (FTIR. The morphology and thermal behavior of electrospun nanofiber were characterized by scanning electron microscope (SEM and thermogravimetric analysis (TGA, respectively. The surface area of nanofiber membranes was measured by Brunauer-Emmert-Teller (BET analysis. Furthermore, water durability test was examined. Water durability test demonstrated that in situ photo-cured PVA/MA/ATM nanofiber membrane had the least average mass loss. The surface areas of PVA/MA/ATM nanofiber membranes were 160-280 m2/g. The surface area and diameter of PVA/MA/ATM nanofibers decreased as the PVA content increased. The diameter of nanofibers was obtained less than 100 nm. The results showed that the water-insoluble nanofiber membranes with better chemical and thermal resistance were obtained. These nanofiber membranes may be a promising candidate for the usage of water treatment.

  2. Biodegradable poly (ɛ-caprolactone)/gelatin nanofibers: Effect of tubular halloysite on structure and properties

    Science.gov (United States)

    Švachová, Veronika; Khunová, Viera; Vojtová, Lucy; PavliÅák, David

    2016-05-01

    The work explores preparation of new advanced nanofibers based on biodegradable polymers and biocompatible tubular halloysite (HNT). Electrospun nanofibers comprising 8 wt% gelatin (Gel) and 8 wt% poly (͛-caprolactone) (PCL) have been prepared by using eco-friendly solvent - acetic acid. The content of HNT in PCL/Gel nanofibers was 0.5, 1.0, 3.0, 6.0 and 9.0 wt%. It was found that the addition of HNT significantly affected the polymer mixture spinnability and the fiber diameter. SEM observations revealed that the structure of nanofibers depends on nanofiber composition. Whilst in nanofibers with lower HNT content uniform morphology with HNTs located merely inside the individual nanofibers has been observed, in nanofibers with 6 and 9 wt% HNT individual particles as well as the agglomerates of HNT have been detected in both, the inner part as well as outside part of nanofiber. Important reinforcing effect has been achieved in whole HNT content. The highest improvement has been reached when the HNT content was 0.5 wt%. In this case, multiple enhancements of strength (2x), elongation (4x) and modulus (2x) have been confirmed. ATR-FTIR revealed that improvement of mechanical properties is also due to the increase of interface interaction in between PCL/Gel and HNT. The prepared PCL/Gel/HNT nanofibers can be used for tissue engineering and/or as drug carriers or signal molecules in whole spectrum of medical applications.

  3. Osteoinductive peptide-functionalized nanofibers with highly ordered structure as biomimetic scaffolds for bone tissue engineering.

    Science.gov (United States)

    Gao, Xiang; Zhang, Xiaohong; Song, Jinlin; Xu, Xiao; Xu, Anxiu; Wang, Mengke; Xie, Bingwu; Huang, Enyi; Deng, Feng; Wei, Shicheng

    2015-01-01

    The construction of functional biomimetic scaffolds that recapitulate the topographical and biochemical features of bone tissue extracellular matrix is now of topical interest in bone tissue engineering. In this study, a novel surface-functionalized electrospun polycaprolactone (PCL) nanofiber scaffold with highly ordered structure was developed to simulate the critical features of native bone tissue via a single step of catechol chemistry. Specially, under slightly alkaline aqueous solution, polydopamine (pDA) was coated on the surface of aligned PCL nanofibers after electrospinning, followed by covalent immobilization of bone morphogenetic protein-7-derived peptides onto the pDA-coated nanofiber surface. Contact angle measurement, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the presence of pDA and peptides on PCL nanofiber surface. Our results demonstrated that surface modification with osteoinductive peptides could improve cytocompatibility of nanofibers in terms of cell adhesion, spreading, and proliferation. Most importantly, Alizarin Red S staining, quantitative real-time polymerase chain reaction, immunostaining, and Western blot revealed that human mesenchymal stem cells cultured on aligned nanofibers with osteoinductive peptides exhibited enhanced osteogenic differentiation potential than cells on randomly oriented nanofibers. Furthermore, the aligned nanofibers with osteoinductive peptides could direct osteogenic differentiation of human mesenchymal stem cells even in the absence of osteoinducting factors, suggesting superior osteogenic efficacy of biomimetic design that combines the advantages of osteoinductive peptide signal and highly ordered nanofibers on cell fate decision. The presented peptide-decorated bone-mimic nanofiber scaffolds hold a promising potential in the context of bone tissue engineering.

  4. Incorporation of functionalized gold nanoparticles into nanofibers for enhanced attachment and differentiation of mammalian cells

    Directory of Open Access Journals (Sweden)

    Jung Dongju

    2012-06-01

    Full Text Available Abstract Background Electrospun nanofibers have been widely used as substrata for mammalian cell culture owing to their structural similarity to natural extracellular matrices. Structurally consistent electrospun nanofibers can be produced with synthetic polymers but require chemical modification to graft cell-adhesive molecules to make the nanofibers functional. Development of a facile method of grafting functional molecules on the nanofibers will contribute to the production of diverse cell type-specific nanofiber substrata. Results Small molecules, peptides, and functionalized gold nanoparticles were successfully incorporated with polymethylglutarimide (PMGI nanofibers through electrospinning. The PMGI nanofibers functionalized by the grafted AuNPs, which were labeled with cell-adhesive peptides, enhanced HeLa cell attachment and potentiated cardiomyocyte differentiation of human pluripotent stem cells. Conclusions PMGI nanofibers can be functionalized simply by co-electrospinning with the grafting materials. In addition, grafting functionalized AuNPs enable high-density localization of the cell-adhesive peptides on the nanofiber. The results of the present study suggest that more cell type-specific synthetic substrata can be fabricated with molecule-doped nanofibers, in which diverse functional molecules are grafted alone or in combination with other molecules at different concentrations.

  5. Environmental remediation and superhydrophilicity of ultrafine antibacterial tungsten oxide-based nanofibers under visible light source

    Energy Technology Data Exchange (ETDEWEB)

    Srisitthiratkul, Chutima; Yaipimai, Wittaya [Nano Functional Textile Laboratory, National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency (NSTDA), 111 Thailand Science Park, Phahonyothin Rd., Klong 1, Klong Luang, Pathumthani 12120 (Thailand); Intasanta, Varol, E-mail: varol@nanotec.or.th [Nano Functional Textile Laboratory, National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency (NSTDA), 111 Thailand Science Park, Phahonyothin Rd., Klong 1, Klong Luang, Pathumthani 12120 (Thailand)

    2012-10-15

    Graphical abstract: Nanosilver-decorated WO{sub 3} photocatalytic nanofibers are antibacterial and superhydrophilic under a visible light source. Highlights: Black-Right-Pointing-Pointer Deposition of nanosilver onto electrospun WO{sub 3} nanofibers' surface was done exploiting visible or UV light driven photoreduction of silver ion. Black-Right-Pointing-Pointer Nanofibers showed antibacterial characteristics. Black-Right-Pointing-Pointer Nanofibers degraded a model toxin effectively. Black-Right-Pointing-Pointer Nanofibers showed superhydrophilicity under a visible light source. - Abstract: Fabrication of nanosilver-decorated WO{sub 3} nanofibers was successfully performed. First, deposition of nanosilver onto electrospun WO{sub 3} nanofibers' surface was done via photoreduction of silver ion under visible or UV light. The resulting hybrid nanofibers not only revealed antibacterial characteristics but also maintained their photocatalytic performance towards methylene blue decomposition. Unexpectedly, the nanofibrous layers prepared from these nanofibers showed superhydrophilicity under a visible light source. The nanofibers might be advantageous in environmental and hygienic nanofiltration under natural light sources, where the self-cleaning characteristics could be valuable in maintenance processes.

  6. A Novel Approach to Limit Chemical Deterioration of Gilthead Sea Bream (Sparus aurata) Fillets: Coating with Electrospun Nanofibers as Characterized by Molecular, Thermal, and Microstructural Properties.

    Science.gov (United States)

    Ceylan, Zafer; Sengor, Gulgun F Unal; Yilmaz, Mustafa Tahsin

    2017-03-27

    Coating of sea bream fillets with thymol loaded chitosan based electrospun nanofibers (TLCN) and chitosan based nanafibers (CN) has been presented a novel approach to delay chemical deterioration. We assessed CN and TLCN with respect of scanting of total volatile basic nitrogen (TVBN), trimethylamine (TMA), thiobarbituric acid (TBA) deterioration during cold storage condition. Electrospinning process was applied to obtain TLCN and CN. Both of nanofibers obtained from biopolymer and bioactive material were cylindrical, smooth, beadless. Thermal, molecular, zeta potential (ZP), and surface properties of the groups were investigated, revealing that CN indicated molecular interactions with thymol in nanofibers, reduce in physical properties of these structures, thermal decomposition (an alteration in mass of CN and TLCN at temperatures below 190 °C, corresponding to 20.53% and 19.97%, respectively) and also dispersion stabilities (ζ potential) of CN and TLCN were determined 33.68 ± 3.35 and 21.85 ± 1.96 mV, respectively. TVBN and TMA stability analyses demonstrated that CN and TLCN were both effective in delaying chemical deterioration of fish fillets, furthermore TLCN was more effective against chemical deterioration. TBA analyses results of fish fillets indicated that CN and TLCN delayed rancidity in fish meat as compared to control group samples. The presented study results suggested that coating of the sea bream fillets with CN and TLCN would be a promising approach to delay the chemical deterioration of fish fillets.

  7. Chitin Nanofiber Transparent Paper for Flexible Green Electronics.

    Science.gov (United States)

    Jin, Jungho; Lee, Daewon; Im, Hyeon-Gyun; Han, Yun Cheol; Jeong, Eun Gyo; Rolandi, Marco; Choi, Kyung Cheol; Bae, Byeong-Soo

    2016-07-01

    A transparent paper made of chitin nanofibers (ChNF) is introduced and its utilization as a substrate for flexible organic light-emitting diodes is demonstrated. Given its promising macroscopic properties, biofriendly characteristics, and availability of the raw material, the utilization of the ChNF transparent paper as a structural platform for flexible green electronics is envisaged.

  8. Electrospun gelatin/polyurethane blended nanofibers for wound healing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Eun; Heo, Dong Nyoung; Lee, Jung Bok; Kwon, Il Keun [Department of Oral Biology, School of Dentistry, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Kim, Jong Ryul; Park, Sang Hyuk [Conservative Dentistry and Institute of Oral Biology, School of Dentistry, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Jeon, Seong Ho, E-mail: kwoni@khu.ac.k [College of Pharmacy, Kangwon National University, Chuncheon 200-701 (Korea, Republic of)

    2009-08-15

    In this study, we prepared a blended nanofiber scaffold using synthetic and natural polymers, polyurethane (PU) and gelatin respectively, using the electrospinning method to prepare a material for wound dressing. In order to confirm the properties of this gelatin/PU blended nanofiber scaffold, we performed scanning electron microscopy, atomic force microscopy, attenuated total reflectance Fourier-transform infrared spectroscopy, thermal gravimetric analysis, contact angle, water uptake, mechanical property, recovery, and degradation tests, and cellular response. The results obtained indicate that the mean diameter of these nanofibers was uniformly electrospun and ranged from 0.4 to 2.1{mu}m. According to the results, when the amount of gelatin in the blended solution decreased, the contact angle increased and water uptake of the scaffold decreased concurrently. In the mechanical tests, the blended nanofibrous scaffolds were elastic, and elasticity increased as the total amount of PU increased. Moreover, as the total amount of gelatin increased, the cell proliferation increased with the same amount of culture time. Therefore, this gelatin/PU blended nanofiber scaffold has potential application for use as a wound dressing.

  9. Effect of bubble size on nanofiber diameter in bubble electrospinning

    Directory of Open Access Journals (Sweden)

    Ren Zhong-Fu

    2016-01-01

    Full Text Available Polymer bubbles are widely used for fabrication of nanofibers. Bubble size affects not only bubble's surface tension, but also fiber's morphology. A mathematical model is established to reveal the effect of bubble size on the spinning process, and the experiment verification shows the theoretical analysis is reliable.

  10. Micro-nanofibers with hierarchical structure by bubbfil-spinning

    Directory of Open Access Journals (Sweden)

    Liu Peng

    2015-01-01

    Full Text Available Bubbfil spinning is used to fabricate micro/nanofibers with hierarchical structure. The wall of a polymer film is attenuated unevenly by a blowing air. The burst of the bubble results in film fragments with different thickness, as a result, different sizes of fibers are obtained.

  11. Silver nanowire dopant enhancing piezoelectricity of electrospun PVDF nanofiber web

    Science.gov (United States)

    Li, Baozhang; Zheng, Jianming; Xu, Chunye

    2013-08-01

    A highly sensitive flexible piezoelectric material is developed by using a composite nanofibers web of polymer and metal. The nanofibers webs are made by electrospinning a mixed solution of poly(vinylidene fluoride) (PVDF) and silver nanowires (AgNWs) in the co-solvent of dimethyl formamide and acetone. SEM images show that the obtained webs are composed of AgNWs doped PVDF fibers with diameters ranging from 200nm to 500nm. Our FTIR and XRD results indicate that doping AgNWs into PVDF fiber can enhance the contents of beta phase of the PVDF. UV-Vis spectrum shows a slightly red shift at 324 nm and 341 nm after the AgNWs doping into PVDF, proving the presence of interaction between AgNWs and the PVDF polymer chain. The piezoelectric constant d33 of the nanofibers webs tested with a homemade system, reveals a good agreement with FTIR and XRD characteristic, and the highest one is up to 29.8 pC/N for the nanofibers webs containing 1.5% AgNWs, which is close to that of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE), 77/23). This study may provide a way to develop high-performance flexible sensors.

  12. Electrical properties of single p-hexaphenylene nanofibers

    DEFF Research Database (Denmark)

    Kjelstrup-Hansen, Jakob; Henrichsen, H.H.; Bøggild, Peter

    2006-01-01

    The electrical characteristics of individual para-hexaphenylene (p6P) nanofibers with typical widths of a few hundred nanometers and heights of a few ten nanometers are investigated. For that purpose we transfer the narofibers onto a lithographically patterned silicon oxide electrode support...

  13. The photophysics of luminescence in multilayered organic nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Quochi, Francesco; Simbrunner, Clemens

    Periodic deposition of para-hexaphenyl (p6P) and alfa-sexithiophene (6T) molecules on a muscovite mica substrate by hot wall epitaxy results in multilayered, crystalline nanofibers. By varying the relative thicknesses of the constituent materials, the fluorescence spectrum can be tuned within the...

  14. Facile Fabrication of Multifunctional Aramid Nanofiber Films by Spin Coating

    Science.gov (United States)

    Lyu, Jing; Liu, Lehao; Zhao, Xing; Shang, Yudong; Zhao, Tingkai; Li, Tiehu

    2016-11-01

    Polymer matrices with excellent mechanical properties, thermal stability and other features are highly demanded for the effective utilization within nanocomposites. Here, we fabricate free-standing aramid nanofiber films via spin coating of an aramid nanofiber/dimethyl sulfoxide solution. Compared with traditional film fabrication methods, this process is time-saving and also able to easily tune the thickness of the films. The resultant films show greatly improved stretchability than that of Kevlar threads and relatively high mechanical strength. Typically, these films with a thickness of 5.5 µm show an ultimate strength of 182 MPa with an ultimate tensile strain of 10.5%. We also apply a finite element modeling to simulate the strain and strength distributions of the films under uniaxial tension, and the results of the simulation are in accordance with the experimental data. Furthermore, the aramid nanofiber films exhibit outstanding thermostability (decomposition at 550 °C under N2 atmosphere and 500 °C in air) and chemical inertness, which would endure acid and alkali. The simple method demonstrated here provides an important way to prepare high-performance aramid nanofiber films for designing new composite systems.

  15. Spontaneous Four-Wave Mixing in an Irregular Nanofiber

    Directory of Open Access Journals (Sweden)

    Shukhin A.A.

    2015-01-01

    Full Text Available The features of biphotons states generated via spontaneous four-wave mixing in nanofibers with a variable cross-section are studied. The spectral amplitude of the biphoton field is calculated and the effects of interference and phase modulation of the biphoton field in such structures is discussed.

  16. Chemical filtration of Cr (VI) with electrospun chitosan nanofiber membranes.

    Science.gov (United States)

    Li, Lei; Li, Yanxiang; Yang, Chuanfang

    2016-04-20

    Chitosan nanofibers (average diameter of 75nm) were electrospun on polyester (PET) scrim to form composite nanofiber membranes with controlled pore size. The membranes were then stacked as a membrane bed for chemical filtration of Cr (VI) of 1-5mg/L. The performance of the bed with respect to loading capacity at breakthrough, bed saturation and utilization efficiency were carefully investigated. The results showed that while these three parameters were dependent on pH, flow rate, flow distribution and packed pattern of the membrane, the latter two were less affected by feed Cr (VI) concentration and bed length. The maximum bed loading capacity for 1mg/L Cr (VI) filtration at breakthrough was found to be 16.5mg-chromium/g-chitosan, higher than the static adsorption capacity of 11.0mg-chromium/g-chitosan using nanofiber mats, indicating the membranes' better potential for dynamic adsorption. The minimum bed length required to avoid breakthrough was determined to be three layers of stacked membranes with nanofiber deposition density of 1g/m(2) by applying bed depth service time (BDST) model.

  17. Dislocation Starvation and Exhaustion Hardening in Mo-alloy Nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Chisholm, Claire [University of California, Berkeley & LBNL; Bei, Hongbin [ORNL; Lowry, M. B. [University of California, Berkeley; Oh, Jason [Hysitron, Inc., MN; Asif, S.A. Syed [Hysitron, Inc., MN; Warren, O. [Hysitron, Inc., MN; Shan, Zhiwei [Xi' an Jiaotong University, China & Hysitron, Inc., MN; George, Easo P [ORNL; Minor, Andrew [University of California, Berkeley & LBNL

    2012-01-01

    The evolution of defects in Mo alloy nanofibers with initial dislocation densities ranging from 0 to 1.6 1014 m2 were studied using an in situ push-to-pull device in conjunction with a nanoindenter in a transmission electron microscope. Digital image correlation was used to determine stress and strain in local areas of deformation. When they had no initial dislocations the Mo alloy nanofibers suffered sudden catastrophic elongation following elastic deformation to ultrahigh stresses. At the other extreme fibers with a high dislocation density underwent sustained homogeneous deformation after yielding at much lower stresses. Between these two extremes nanofibers with intermediate dislocation densities demonstrated a clear exhaustion hardening behavior, where the progressive exhaustion of dislocations and dislocation sources increases the stress required to drive plasticity. This is consistent with the idea that mechanical size effects ( smaller is stronger ) are due to the fact that nanostructures usually have fewer defects that can operate at lower stresses. By monitoring the evolution of stress locally we find that exhaustion hardening causes the stress in the nanofibers to surpass the critical stress predicted for self-multiplication, supporting a plasticity mechanism that has been hypothesized to account for the rapid strain softening observed in nanoscale bcc materials at high stresses.

  18. Structure and properties of carbon nanofibers. application as electrocatalyst support

    Directory of Open Access Journals (Sweden)

    S. del Rio

    2012-03-01

    Full Text Available The present work aimed to gain an insight into the physical-chemical properties of carbon nanofibers and the relationship between those properties and the electrocatalytic behavior when used as catalyst support for their application in fuel cells.

  19. Stability of β-carotene in polyethylene oxide electrospun nanofibers

    Science.gov (United States)

    Peinado, I.; Mason, M.; Romano, A.; Biasioli, F.; Scampicchio, M.

    2016-05-01

    β-carotene (βc) was successfully incorporated into electrospun nanofibers of poly-(ethylene oxide) (PEO) with the aim of prolonging its shelf life and thermal stability. The physical and thermal properties of the βc-PEO-nanofibers were determined by scanning electron microscopy (SEM), color analysis, and differential scanning calorimetry (DSC). The nanofibers of PEO and βc-PEO exhibited average fiber diameters of 320 ± 46 and 230 ± 21 nm, with colorimetric coordinates L* = 95.7 ± 2.4 and 89.4 ± 4.6 and b* = -0.5 ± 0.1 and 6.2 ± 3.0 respectively. Thermogravimetric analysis coupled with Proton Transfer-Mass Spectroscopy (TGA/PTR-ms) demonstrated that coated βc inside PEO nanofibers increased thermal stability when compared to standard βc in powder form. In addition, β-carotene in the membranes showed higher stability during storage when compared with β-carotene in solution with a decrease in concentration of 57 ± 4% and 70 ± 2% respectively, thus should extend the shelf life of this compound. Also, TGA coupled with PTR-MS resulted in a promising technique to online-monitoring thermal degradation.

  20. Electrospun propolis/polyurethane composite nanofibers for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jeong In [Department of Bio-nano System Engineering, Chonbuk National University, Jeonju 561–756 (Korea, Republic of); Pant, Hem Raj, E-mail: hempant@jbnu.ac.kr [Department of Bio-nano System Engineering, Chonbuk National University, Jeonju 561–756 (Korea, Republic of); Department of Engineering Science and Humanities, Pulchowk Campus, Tribhuvan University, Kathmandu (Nepal); Research Institute for Next Generation, Kalanki, Kathmandu (Nepal); Sim, Hyun-Jaung [Department of Bioactive Material Science, Research Center of Bioactive Material, Chonbuk National University, Jeonju, Chonbuk (Korea, Republic of); Lee, Kang Min [Department of Molecular Biology, College of Natural Science, Chonbuk National University, Jeonju, 561–756 (Korea, Republic of); Kim, Cheol Sang, E-mail: chskim@jbnu.ac.kr [Department of Bio-nano System Engineering, Chonbuk National University, Jeonju 561–756 (Korea, Republic of)

    2014-11-01

    Tissue engineering requires functional polymeric membrane for adequate space for cell migration and attachment within the nanostructure. Therefore, biocompatible propolis loaded polyurethane (propolis/PU) nanofibers were successfully prepared using electrospinning of propolis/PU blend solution. Here, composite nanofibers were subjected to detailed analysis using electron microscopy, FT-IR spectroscopy, thermal gravimetric analysis (TGA), and mechanical properties and water contact angle measurement. FE-SEM images revealed that the composite nanofibers became point-bonded with increasing amounts of propolis in the blend due to its adhesive properties. Incorporation of small amount of propolis through PU matrix could improve the hydrophilicity and mechanical strength of the fibrous membrane. In order to assay the cytocompatibility and cell behavior on the composite scaffolds, fibroblast cells were seeded on the matrix. Results suggest that the incorporation of propolis into PU fibers could increase its cell compatibility. Moreover, composite nanofibers have effective antibacterial activity. Therefore, as-synthesized nanocomposite fibrous mat has great potentiality in wound dressing and skin tissue engineering. - Highlights: • Sufficient amount of propolis is simply loaded through PU fibers. • Propolis increases the hydrophilicity and mechanical properties of PU fibers. • Composite mat shows excellent antibacterial activity. • Small amount of propolis can enhance the cell compatibility of PU fibers.

  1. Ultralight, scalable, and high-temperature–resilient ceramic nanofiber sponges

    Science.gov (United States)

    Wang, Haolun; Zhang, Xuan; Wang, Ning; Li, Yan; Feng, Xue; Huang, Ya; Zhao, Chunsong; Liu, Zhenglian; Fang, Minghao; Ou, Gang; Gao, Huajian; Li, Xiaoyan; Wu, Hui

    2017-01-01

    Ultralight and resilient porous nanostructures have been fabricated in various material forms, including carbon, polymers, and metals. However, the development of ultralight and high-temperature resilient structures still remains extremely challenging. Ceramics exhibit good mechanical and chemical stability at high temperatures, but their brittleness and sensitivity to flaws significantly complicate the fabrication of resilient porous ceramic nanostructures. We report the manufacturing of large-scale, lightweight, high-temperature resilient, three-dimensional sponges based on a variety of oxide ceramic (for example, TiO2, ZrO2, yttria-stabilized ZrO2, and BaTiO3) nanofibers through an efficient solution blow-spinning process. The ceramic sponges consist of numerous tangled ceramic nanofibers, with densities varying from 8 to 40 mg/cm3. In situ uniaxial compression in a scanning electron microscope showed that the TiO2 nanofiber sponge exhibits high energy absorption (for example, dissipation of up to 29.6 mJ/cm3 in energy density at 50% strain) and recovers rapidly after compression in excess of 20% strain at both room temperature and 400°C. The sponge exhibits excellent resilience with residual strains of only ~1% at 800°C after 10 cycles of 10% compression strain and maintains good recoverability after compression at ~1300°C. We show that ceramic nanofiber sponges can serve multiple functions, such as elasticity-dependent electrical resistance, photocatalytic activity, and thermal insulation. PMID:28630915

  2. Synthesis of Carbon Nanofibers on Large Woven Cloth

    NARCIS (Netherlands)

    Kotanjac, Z.; Lefferts, L.; Koissin, V.; Warnet, L.; Akkerman, R.

    2015-01-01

    This experimental study aims at the in situ growth of carbon nano-fibers (CNFs) on relatively large (25 × 30 cm2) single-layer carbon-fiber fabrics. It is shown that CNFs can be grown with the distribution potentially suitable for a future use in polymer-matrix composite materials. Details of tuning

  3. Recent prospective of nanofiber scaffolds fabrication approaches for skin regeneration.

    Science.gov (United States)

    Ahmadi-Aghkand, Fateme; Gholizadeh-Ghaleh Aziz, Shiva; Panahi, Yunes; Daraee, Hadis; Gorjikhah, Fateme; Gholizadeh-Ghaleh Aziz, Sara; Hsanzadeh, Arash; Akbarzadeh, Abolfazl

    2016-11-01

    The largest organ of human body is skin, which acting as a barrier with immunologic, sensorial and protective functions. It is always in exposure to the external environment, which can result many different types of damage and injury with loss of variable volumes of extracellular matrix (ECM). For the treatment of skin lesions and damages, several approaches are now accessible, such as the application of allografts, autografts, and tissue-engineered substitutes, wound dressings and nanofiber scaffolds approaches. Even though proven clinically effective, these methods are still characterized by main drawbacks such as patient inadequate vascularization, morbidity, the inability to reproduce skin appendages, low adherence to the wound bed and high manufacturing costs. Advanced approaches based on nanofiber scaffolds approaches offer a permanent, viable and effective substitute to explain the drawbacks of skin regeneration and repair by combining growth factors, cells, and biomaterials and advanced biomanufacturing methods. This review details recent advances of nanofiber scaffolds in skin regeneration and repair strategies, and describes a synthesis method of nanofiber scaffolds.

  4. Preparation of Electrically Conductive Polystyrene/Carbon Nanofiber Nanocomposite Films

    Science.gov (United States)

    Sun, Luyi; O'Reilly, Jonathan Y.; Tien, Chi-Wei; Sue, Hung-Jue

    2008-01-01

    A simple and effective approach to prepare conductive polystyrene/carbon nanofiber (PS/CNF) nanocomposite films via a solution dispersion method is presented. Inexpensive CNF, which has a structure similar to multi-walled carbon nanotubes, is chosen as a nanofiller in this experiment to achieve conductivity in PS films. A good dispersion is…

  5. Polysaccharide-coated PCL nanofibers for wound dressing applications.

    Science.gov (United States)

    Croisier, Florence; Atanasova, Ganka; Poumay, Yves; Jérôme, Christine

    2014-12-01

    Polysaccharide-based nanofibers with a multilayered structure are prepared by combining electrospinning (ESP) and layer-by-layer (LBL) deposition techniques. Charged nanofibers are firstly prepared by electrospinning poly(ε-caprolactone) (PCL) with a block-copolymer bearing carboxylic acid functions. After deprotonation of the acid groups, the layer-by-layer deposition of polyelectrolyte polysaccharides, notably chitosan and hyaluronic acid, is used to coat the electrospun fibers. A multilayered structure is achieved by alternating the deposition of the positively charged chitosan with the deposition of a negatively charged polyelectrolyte. The construction of this multilayered structure is followed by Zeta potential measurements, and confirmed by observation of hollow nanofibers resulting from the dissolution of the PCL core in a selective solvent. These novel polysaccharide-coated PCL fiber mats remarkably combine the mechanical resistance typical of the core material (PCL)-particularly in the hydrated state-with the surface properties of chitosan. The control of the nanofiber structure offered by the electrospinning technology, makes the developed process very promising to precisely design biomaterials for tissue engineering. Preliminary cell culture tests corroborate the potential use of such system in wound healing applications.

  6. Highly crystalline MOF-based materials grown on electrospun nanofibers

    Science.gov (United States)

    Bechelany, M.; Drobek, M.; Vallicari, C.; Abou Chaaya, A.; Julbe, A.; Miele, P.

    2015-03-01

    Supported Metal Organic Frameworks (MOFs) with a high specific surface area are of great interest for applications in gas storage, separation, sensing, and catalysis. In the present work we report the synthesis of a novel composite architecture of MOF materials supported on a flexible mat of electrospun nanofibers. The system, based on three-dimensional interwoven nanofibers, was designed by using a low-cost and scalable multistep synthesis protocol involving a combination of electrospinning and low-temperature atomic layer deposition of oxide materials, and their subsequent solvothermal conversion under either conventional or microwave-assisted heating. This highly versatile approach allows the production of different types of supported MOF crystals with controlled sizes, morphology, orientation and high accessibility.Supported Metal Organic Frameworks (MOFs) with a high specific surface area are of great interest for applications in gas storage, separation, sensing, and catalysis. In the present work we report the synthesis of a novel composite architecture of MOF materials supported on a flexible mat of electrospun nanofibers. The system, based on three-dimensional interwoven nanofibers, was designed by using a low-cost and scalable multistep synthesis protocol involving a combination of electrospinning and low-temperature atomic layer deposition of oxide materials, and their subsequent solvothermal conversion under either conventional or microwave-assisted heating. This highly versatile approach allows the production of different types of supported MOF crystals with controlled sizes, morphology, orientation and high accessibility. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr06640e

  7. Electrospun Nanofiber Scaffolds with Gradations in Fiber Organization

    Science.gov (United States)

    Khandalavala, Karl; Jiang, Jiang; Shuler, Franklin D.; Xie, Jingwei

    2015-01-01

    The goal of this protocol is to report a simple method for generating nanofiber scaffolds with gradations in fiber organization and test their possible applications in controlling cell morphology/orientation. Nanofiber organization is controlled with a new fabrication apparatus that enables the gradual decrease of fiber organization in a scaffold. Changing the alignment of fibers is achieved through decreasing deposition time of random electrospun fibers on a uniaxially aligned fiber mat. By covering the collector with a moving barrier/mask, along the same axis as fiber deposition, the organizational structure is easily controlled. For tissue engineering purposes, adipose-derived stem cells can be seeded to these scaffolds. Stem cells undergo morphological changes as a result of their position on the varied organizational structure, and can potentially differentiate into different cell types depending on their locations. Additionally, the graded organization of fibers enhances the biomimicry of nanofiber scaffolds so they more closely resemble the natural orientations of collagen nanofibers at tendon-to-bone insertion site compared to traditional scaffolds. Through nanoencapsulation, the gradated fibers also afford the possibility to construct chemical gradients in fiber scaffolds, and thereby further strengthen their potential applications in fast screening of cell-materials interaction and interfacial tissue regeneration. This technique enables the production of continuous gradient scaffolds, but it also can potentially produce fibers in discrete steps by controlling the movement of the moving barrier/mask in a discrete fashion. PMID:25938562

  8. PREPARATION OF CARBON NANOFIBERS BY POLYMER BLEND TECHNIQUE

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The polymer blend technique is a novel method to produced carbon nanofibers. In this paper, we have prepared fine carbon fibers and porous carbon materials by this technique, and we will discuss the experiment results by means of SEM, TGA, Element Analysis, etc.

  9. Dynamic in vivo biocompatibility of angiogenic peptide amphiphile nanofibers.

    Science.gov (United States)

    Ghanaati, Shahram; Webber, Matthew J; Unger, Ronald E; Orth, Carina; Hulvat, James F; Kiehna, Sarah E; Barbeck, Mike; Rasic, Angela; Stupp, Samuel I; Kirkpatrick, C James

    2009-10-01

    Biomaterials that promote angiogenesis have great potential in regenerative medicine for rapid revascularization of damaged tissue, survival of transplanted cells, and healing of chronic wounds. Supramolecular nanofibers formed by self-assembly of a heparin-binding peptide amphiphile and heparan sulfate-like glycosaminoglycans were evaluated here using a dorsal skinfold chamber model to dynamically monitor the interaction between the nanofiber gel and the microcirculation, representing a novel application of this model. We paired this model with a conventional subcutaneous implantation model for static histological assessment of the interactions between the gel and host tissue. In the static analysis, the heparan sulfate-containing nanofiber gels were found to persist in the tissue for up to 30 days and revealed excellent biocompatibility. Strikingly, as the nanofiber gel biodegraded, we observed the formation of a de novo vascularized connective tissue. In the dynamic experiments using the dorsal skinfold chamber, the material again demonstrated good biocompatibility, with minimal dilation of the microcirculation and only a few adherent leukocytes, monitored through intravital fluorescence microscopy. The new application of the dorsal skinfold model corroborated our findings from the traditional static histology, demonstrating the potential use of this technique to dynamically evaluate the biocompatibility of materials. The observed biocompatibility and development of new vascularized tissue using both techniques demonstrates the potential of these angiogenesis-promoting materials for a host of regenerative strategies.

  10. Silver-functionalized carbon nanofiber composite electrodes for ibuprofen detection

    NARCIS (Netherlands)

    Manea, F.; Motoc, S.; Pop, A.; Remes, A.; Schoonman, J.

    2012-01-01

    The aim of this study is to prepare and characterize two types of silver-functionalized carbon nanofiber (CNF) composite electrodes, i.e., silver-decorated CNF-epoxy and silver-modified natural zeolite-CNF-epoxy composite electrodes suitable for ibuprofen detection in aqueous solution. Ag carbon nan

  11. Needleless Electrospinning of Uniform Nanofibers Using Spiral Coil Spinnerets

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2012-01-01

    Full Text Available Polyvinyl alcohol nanofibers were prepared by a needleless electrospinning technique using a rotating spiral wire coil as spinneret. The influences of coil dimension (e.g., coil length, coil diameter, spiral distance, and wire diameter and operating parameters (e.g., applied voltage and spinning distance on electrospinning process, nanofiber diameter, and fiber productivity were examined. It was found that the coil dimension had a considerable influence on the nanofiber production rate, but minor effect on the fiber diameter. The fiber production rate increased with the increased coil length or coil diameter, or the reduced spiral distance or wire diameter. Higher applied voltage or shorter collecting distance also improved the fiber production rate but had little influence on the fiber diameter. Compared with the conventional needle electrospinning, the coil electrospinning produced finer fibers with a narrower diameter distribution. A finite element method was used to analyze the electric field on the coil surface and in electrospinning zone. It was revealed that the high electric field intensity was concentrated on the coil surface, and the intensity was highly dependent on the coil dimension, which can be used to explain the electrospinning performances of coils. In addition, PAN nanofibers were prepared using the same needleless electrospinning technique to verify the improvement in productivity.

  12. Morphological Characterization of Nanofibers: Methods and Application in Practice

    Directory of Open Access Journals (Sweden)

    Jakub Širc

    2012-01-01

    Full Text Available Biomedical applications such as wound dressing for skin regeneration, stem cell transplantation, or drug delivery require special demands on the three-dimensional porous scaffolds. Besides the biocompatibility and mechanical properties, the morphology is the most important attribute of the scaffold. Specific surface area, volume, and size of the pores have considerable effect on cell adhesion, growth, and proliferation. In the case of incorporated biologically active substances, their release is also influenced by the internal structure of nanofibers. Although many scientific papers are focused on the preparation of nanofibers and evaluation of biological tests, the morphological characterization was described just briefly as service methods. The aim of this paper is to summarize the methods applicable for morphological characterization of nanofibers and supplement it by the results of our research. Needleless electrospinning technique was used to prepare nanofibers from polylactide, poly(ε-caprolactone, gelatin, and polyamide. Scanning electron microscopy was used to evaluate the fiber diameters and to reveal eventual artifacts in the nanofibrous structure. Nitrogen adsorption/desorption measurements were employed to measure the specific surface areas. Mercury porosimetry was used to determine total porosities and compare pore size distributions of the prepared samples.

  13. Organic nanofiber-loaded surface plasmon-polariton waveguides

    DEFF Research Database (Denmark)

    Radko, Ilya; Fiutowski, Jacek; Tavares, Luciana;

    2011-01-01

    We demonstrate the use of organic nanofibers, composed of self-assembled organic molecules, as a dielectric medium for dielectric-loaded surface plasmon polariton waveguides at near-infrared wavelengths. We successfully exploit a metallic grating coupler to excite the waveguiding mode and charact...

  14. Reducing bleaching effects in organic nanofibers by coating

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter;

    Para-hexaphenylene (p-6P) organic nanofibers emit polarized, blue light upon UV excitation with a peak wavelength of the emitted light of 425 nm [1] and a spatially anisotropic distribution of the emitted light [2]. These features could enable future (opto-)electronic applications [3], since, for...

  15. Preparation of Biopolymeric Nanofiber Containing Silica and Antibiotic

    Directory of Open Access Journals (Sweden)

    A. Bagheri Pebdeni

    2016-01-01

    Full Text Available The biocompatible and biodegradable polymer nanofiber with high potential for anti-bacterial coating are used for: multi-functional membranes, tissue engineering, wound dressings, drug delivery, artificial organs, vascular grafts and etc. Electrospinning nanofiber made of scaffolding due to characteristics such as high surface to volume ratio, high porosity and very fine pores are used for a wide range of applications. In this study, polymer composite nanofiber Silica/chitosan/poly (ethylene oxide /cefepime antibiotic synthesis and antibacterial properties will be discussed. The optimum conditions for preparation of electrospun nanofiber were: voltage; 21 kV, feed rate; 0.5 mL/h, nozzle-collector distance; 10 cm, and chitosan/poly(ethylene oxide weight ratio 90:10 and the volume ratio of chitosan/silica is 70:30.  The antibacterial activity of composite scaffolds were tested by agar plate method by two type bacteria including Escherichia coli and Staphylococcus aureus. With the addition of the silica to chitosan, the hybrid was more biodegradable and improves the mechanical properties of biopolymer.

  16. Planctomycetes as novel source of bioactive molecules

    Directory of Open Access Journals (Sweden)

    Ana Patrícia Graça

    2016-08-01

    Full Text Available Marine environments are a fruitful source of bioactive compounds some of which are the newest leading drugs in medicinal therapeutics. Of particular importance are organisms like sponges and macroalgae and their associated microbiome. Planctomycetes, abundant in macroalgae biofilms, are promising producers of bioactive compounds since they share characteristics, like large genomes and complex life cycles, with the most bioactive bacteria, the Actinobacteria. Furthermore, genome mining revealed the presence of secondary metabolite pathway genes or clusters in 13 analyzed Planctomycetes genomes.In order to assess the antimicrobial production of a large and diverse collection of Planctomycetes isolated from macroalgae from the Portuguese coast, molecular and bioactivity assays were performed in 40 bacteria from several taxa. Two genes commonly associated with the production of bioactive compounds, nonribosomal peptide synthetases (NRPS and polyketide synthases (PKS genes were screened. Molecular analysis revealed that 95 % of the planctomycetes potentially have one or both secondary bioactive genes; 85 % amplified with PKS-I primers and 55 % with NRPS primers. Some of the amplified genes were confirmed to be involved in secondary metabolite pathways. Using bioinformatic tools their biosynthetic pathways were predicted. The secondary metabolite genomic potential of strains LF1, UC8 and FC18 was assessed using in silico analysis of their genomes. Aqueous and organic extracts of the Planctomycetes were evaluated for their antimicrobial activity against an environmental Escherichia coli, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 25923, Bacillus subtilis ATCC 6633 and a clinical isolate of Candida albicans. The screening assays showed a high number of planctomycetes with bioactive extracts revealing antifungal (43 % and antibacterial (54 % activity against C. albicans and B. subtilis, respectively

  17. Ordered Nucleation Sites for the Growth of Zinc Oxide Nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J.; Ginley, D.S.; Shaheen, S.

    2006-01-01

    Organic photovoltaics (OPVs) offer a promising route to low cost photovoltaic (PV) technology that can be inexpensively manufactured on a large scale for use in power generation and commercial products. Solar power conversion efficiencies of laboratory scale OPV devices have recently reached ~5%; however, projected efficiencies of at least 10% will be required for commercialization. An analogous approach that has arisen recently that can potentially increase efficiencies employs metal oxide semiconductors as the electron acceptor, creating a hybrid organic-inorganic device. This approach offers the advantage that the conduction band of the oxide can be tuned in a systematic way through doping, thus potentially achieving higher photovoltages in the device. Additionally, nanostructures of these materials can be easily grown from precursor solutions, providing a technique to precisely control the nanoscale geometry. This work focuses on using ZnO, which is known to have high electron mobility (>100 cm2/Vs), as the electron acceptor. Nanofibers of ZnO can be grown from precursors such as zinc acetate or zinc nitrate to form arrays of nanofibers into which a conjugated polymer can be intercalated to form a composite PV device. The morphology of the nanofiber array is critical to the performance of the device, but current methods of nanofiber growth from a flat, polycrystalline nucleation layer allow for little morphological control. To overcome this limitation, we have created ordered arrays of ZnO nucleation sites with controllable size and spacing. Toluene solutions of diblock copolymer micelles with ZnCl2 incorporated into the micellar cores were spin-coated onto glass substrates and etched with an O2 plasma to yield hexagonally ordered arrays of ZnO nanoparticles that functioned as nucleation sites. Changing the concentration of ZnCl2 and the molecular weight and ratio of the diblock copolymer resulted in systematic variation in the size and spacing of the

  18. Bioactivities and Health Benefits of Wild Fruits.

    Science.gov (United States)

    Li, Ya; Zhang, Jiao-Jiao; Xu, Dong-Ping; Zhou, Tong; Zhou, Yue; Li, Sha; Li, Hua-Bin

    2016-08-04

    Wild fruits are exotic or underutilized. Wild fruits contain many bioactive compounds, such as anthocyanins and flavonoids. Many studies have shown that wild fruits possess various bioactivities and health benefits, such as free radical scavenging, antioxidant, anti-inflammatory, antimicrobial, and anticancer activity. Therefore, wild fruits have the potential to be developed into functional foods or pharmaceuticals to prevent and treat several chronic diseases. In the present article, we review current knowledge about the bioactivities and health benefits of wild fruits, which is valuable for the exploitation and utilization of wild fruits.

  19. Bioactivity of bioresorbable composite based on bioactive glass and poly-L-lactide

    Institute of Scientific and Technical Information of China (English)

    ZHOU Zhi-hua; RUAN Jian-ming; ZOU Jian-peng; ZHOU Zhong-cheng; SHEN Xiong-jun

    2007-01-01

    Bioactive and bioresorbable composite was fabricated by a solvent evaporation technique using poly-L-lactide(PLLA) and bioactive glass (average particle size: 6.8 μm). Bioactive glass granules are homogeneously distributed in the composite with microcrack structure. The formation of hydroxyapatite(HA) on the composite in simulated body fluid(SBF) was analyzed by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), X-ray diffraction(XRD), and Raman spectra. Rod-like HA crystals deposit on the surface of PLLA/bioactive glass composite after soaking for 3 d. Both rod-like crystals and HA layer form on the surface for 14 d in SBF. The high bioactivity of PLLA/bioactive glass composite indicates the potential of materials for integration with bone.

  20. Sol-gel derived porous bioactive nanocomposites: Synthesis and in vitro bioactivity

    Science.gov (United States)

    Shankhwar, Nisha; Kothiyal, G. P.; Srinivasan, A.

    2013-06-01

    Porous bioactive composites consisting of SiO2-CaO-Na2O-P2O5 bioactive glass-ceramic and synthetic water soluble polymer Polyvinylpyrrolidone [PVP (C6H9NO)n, MW˜40000 g/mol] have been synthesized by sol-gel route. As-prepared polymeric composites were characterized by X-ray diffraction (XRD) technique. Two major bone mineral phases, viz., hydroxyapatite [Ca10(PO4)6(OH)2] and wollastonite [calcium silicate (CaSiO3)] have been identified in the XRD patterns of the composites. Presence of these bone minerals indicates the bioactive nature of the composites. In vitro bioactivity tests confirm bioactivity in the porous composites. The flexibility offered by these bioactive polymer composites is advantageous for its application as implant material.

  1. Highly Sensitive Local Surface Plasmon Resonance in Anisotropic Au Nanoparticles Deposited on Nanofibers

    Directory of Open Access Journals (Sweden)

    Masanari Saigusa

    2015-01-01

    Full Text Available This paper reports the facile and high-throughput fabrication method of anisotropic Au nanoparticles with a highly sensitive local surface plasmon resonance (LPR using cylindrical nanofibers as substrates. The substrates consisting of nanofibers were prepared by the electrospinning of poly(vinylidene fluoride (PVDF. The Au nanoparticles were deposited on the surface of electrospun nanofibers by vacuum evaporation. Scanning electron microscopy revealed the formation of a curved Au island structure on the surface of cylindrical nanofibers. Polarized UV-visible extinction spectroscopy showed anisotropy in their LPR arising from the high surface curvature of the nanofiber. The LPR of the Au nanoparticles on the thinnest nanofiber with a diameter of ~100 nm showed maximum refractive index (RI sensitivity over 500 nm/RI unit (RIU. The close correlation between the fiber diameter dependence of the RI sensitivity and polarization dependence of the LPR suggests that anisotropic Au nanoparticles improve RI sensitivity.

  2. Fabrication and Characterization of Electrospun Wool Keratin/Poly(vinyl alcohol Blend Nanofibers

    Directory of Open Access Journals (Sweden)

    Shuai Li

    2014-01-01

    Full Text Available Wool keratin/poly(vinyl alcohol (PVA blend nanofibers were fabricated using the electrospinning method in formic acid solutions with different weight ratios of keratin to PVA. The resultant blend nanofibers were characterized by scanning electron microscopy (SEM, Fourier transform infrared (FTIR, X-ray diffraction (XRD, thermal gravimetric analysis (TGA, and tensile test. SEM images showed that the diameter of the blend nanofibers was affected by the content of keratin in blend solution. FTIR and XRD analyses data demonstrated that there were good interactions between keratin and PVA in the blended nanofibers caused by possibly hydrogen bonds. The TGA study revealed that the thermal stability of the blend nanofibers was between those of keratin and PVA. Tensile test indicated that the addition of PVA was able to improve the mechanical properties of the electrospun nanofibers.

  3. Organic nanofibers integrated by transfer technique in field-effect transistor devices

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Thilsing-Hansen, Kasper;

    2011-01-01

    The electrical properties of self-assembled organic crystalline nanofibers are studied by integrating these on field-effect transistor platforms using both top and bottom contact configurations. In the staggered geometries, where the nanofibers are sandwiched between the gate and the source-drain...... light on the charge injection and transport properties for such organic nanostructures and thus constitute a significant step forward towards a nanofiber-based light-emitting device.......-drain electrodes, a better electrical conduction is observed compared to the coplanar geometry where the nanofibers are placed over the gate and the source-drain electrodes. Qualitatively different output characteristics were observed for top and bottom contact devices reflecting the significantly different...... contact resistances. Bottom contact devices are dominated by contact effects while the top contact device characteristics are determined by the nanofiber bulk properties. It is found that the contact resistance is lower for crystalline nanofibers when compared to amorphous thin films. These results shed...

  4. Fabrication and characterization of silver- and copper-coated Nylon 6 forcespun nanofibers by thermal evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Mihut, Dorina M., E-mail: dorinamm@yahoo.com; Lozano, Karen [Department of Mechanical Engineering, The University of Texas Pan American, 1201 W University Drive, Edinburg, Texas 78539 (United States); Foltz, Heinrich [Department of Electrical Engineering, The University of Texas Pan American, 1201 W University Drive, Edinburg, Texas 78539 (United States)

    2014-11-01

    Silver and copper nanoparticles were deposited as thin films onto substrates consisting of Nylon 6 nanofibers manufactured using forcespinning{sup ®} equipment. Different rotational speeds were used to obtain continuous nanofibers of various diameters arranged as nonwoven mats. The Nylon 6 nanofibers were collected as successive layers on frames, and a high-vacuum thermal evaporation method was used to deposit the silver and copper thin films on the nanofibers. The structures were investigated using scanning electron microscopy–scanning transmission electron microscopy, atomic force microscopy, x-ray diffraction, and electrical resistance measurements. The results indicate that evaporated silver and copper nanoparticles were successfully deposited on Nylon 6 nanofibers as thin films that adhered well to the polymer substrate while the native morphology of the nanofibers were preserved, and electrically conductive nanostructures were achieved.

  5. Electrical properties of in-situ grown and transferred organic nanofibers

    DEFF Research Database (Denmark)

    Oliveira Hansen, Roana Melina de; Madsen, Morten; Kjelstrup-Hansen, Jakob

    2010-01-01

    Para-hexaphenylene (p6P) molecules have the ability to self-assemble into organic nanofibers, which exhibit a range of interesting optical and optoelectronic properties such as intense, polarized luminescence, waveguiding and lasing. The nanofibers are typically grown on specific single...... of the nanofibers can be manipulated by structuring the gold surface prior to parahexaphenylene (p6P) deposition. In this work it is demonstrated, how such organic nanofiber growth can be controlled by modifying the design of the underlying gold structures prior to growth. Here, the investigated designs include...... pinning lines and gratings. We demonstrate how gold gratings fabricated on an insulating substrate can enable electrical contact to in-situ grown p6P nanofibers. Furthermore, the electrical characteristics of in-situ grown fibers are compared to that of transferred p6P nanofibers. The transferred...

  6. Superhydrophilicity of a nanofiber-covered aluminum surface fabricated via pyrophosphoric acid anodizing

    Science.gov (United States)

    Nakajima, Daiki; Kikuchi, Tatsuya; Natsui, Shungo; Suzuki, Ryosuke O.

    2016-12-01

    A superhydrophilic aluminum surface covered by numerous alumina nanofibers was fabricated via pyrophosphoric acid anodizing. High-density anodic alumina nanofibers grow on the bottom of a honeycomb oxide via anodizing in concentrated pyrophosphoric acid. The water contact angle on the nanofiber-covered aluminum surface decreased with time after a 4 μL droplet was placed on the surface, and a superhydrophilic behavior with a contact angle measuring 2.2° was observed within 2 s; this contact angle is considerably lower than those observed for electropolished and porous alumina-covered aluminum surfaces. There was no dependence of the superhydrophilicity on the density of alumina nanofibers fabricated via different constant voltage anodizing conditions. The superhydrophilic property of the surface covered by anodic alumina nanofibers was maintained during an exposure test for 359 h. The quick-drying and snow-sliding behaviors of the superhydrophilic aluminum covered with anodic alumina nanofibers were demonstrated.

  7. Fabrication and durable antibacterial properties of electrospun chitosan nanofibers with silver nanoparticles.

    Science.gov (United States)

    Liu, Yanan; Liu, Yang; Liao, Nina; Cui, Fuhai; Park, Mira; Kim, Hak-Yong

    2015-08-01

    Non-precipitation chitosan/silver nanoparticles (AgNPs) in 1% acetic acid aqueous solution was prepared from chitosan colloidal gel with various contents of silver nitrate via electron beam irradiation (EBI). Electrospun chitosan-based nanofibers decorated with AgNPs were successfully performed by blending poly(vinyl alcohol). The morphology of as-prepared nanofibers and the size of AgNPs in the nanofibers were investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The presence of AgNPs in as-obtained nanofibers was also confirmed by ultraviolet-visible spectroscopy (UV), Fourier transform infrared (FT-IR) spectroscopy, EDX spectrum and metal mapping. Silver ion release behavior indicated that these hybrid nanofibers continually release adequate silver to exhibit antibacterial activity over 16 days. These biocomposite nanofibers showed pronounced antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli).

  8. Electrospun nanofibers composed of poly({epsilon}-caprolactone) and polyethylenimine for tissue engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jang Ho [Department of Biosystems and Biomaterials Science and Engineering, Seoul National University, Seoul 151-921 (Korea, Republic of); Choung, Pill-Hoon [Department of Oral and Maxillofacial Surgery, Tooth Bioengineering National Research Lab, School of Dentistry, Seoul National University, Seoul 110-744 (Korea, Republic of); Kim, In Yong [Department of Agricultural Biotechnology, Seoul National University, Seoul 151-921 (Korea, Republic of); Lim, Ki Taek; Son, Hyun Mok [Department of Biosystems and Biomaterials Science and Engineering, Seoul National University, Seoul 151-921 (Korea, Republic of); Choung, Yun-Hoon [Department of Otolaryngology, Ajou University School of Medicine, Suwon, 443-721 (Korea, Republic of); Cho, Chong-Su, E-mail: chocs@plaza.snu.ac.kr [Department of Agricultural Biotechnology, Seoul National University, Seoul 151-921 (Korea, Republic of); Research Institute for Agriculture and Life Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Chung, Jong Hoon, E-mail: jchung@snu.ac.kr [Department of Biosystems and Biomaterials Science and Engineering, Seoul National University, Seoul 151-921 (Korea, Republic of); Research Institute for Agriculture and Life Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of)

    2009-06-01

    Poly({epsilon}-caprolactone) (PCL) electrospun nanofibers have been reported as a scaffold for tissue engineering application. However, high hydrophobicity of PCL limits use of functional scaffold. In this study, PCL/polyethylenimine (PEI) blend electrospun nanofibers were prepared to overcome the limitation of PCL ones because the PEI as a cationic polymer can increase cell adhesion and can improve the electrospinnability of PCL. The structure, mechanical properties and biological activity of the PCL/PEI electrospun nanofibers were studied. The diameters of the PCL/PEI nanofibers ranged from 150.4 {+-} 33 to 220.4 {+-} 32 nm. The PCL/PEI nanofibers showed suitable mechanical properties with adequate porosity and increased hydrophilic behavior. The cell adhesion and cell proliferation of PCL nanofibers were increased by blending with PEI due to the hydrophilic properties of PEI.

  9. Mechanical properties and cellular response of novel electrospun nanofibers for ligament tissue engineering: Effects of orientation and geometry.

    Science.gov (United States)

    Pauly, Hannah M; Kelly, Daniel J; Popat, Ketul C; Trujillo, Nathan A; Dunne, Nicholas J; McCarthy, Helen O; Haut Donahue, Tammy L

    2016-08-01

    Electrospun nanofibers are a promising material for ligamentous tissue engineering, however weak mechanical properties of fibers to date have limited their clinical usage. The goal of this work was to modify electrospun nanofibers to create a robust structure that mimics the complex hierarchy of native tendons and ligaments. The scaffolds that were fabricated in this study consisted of either random or aligned nanofibers in flat sheets or rolled nanofiber bundles that mimic the size scale of fascicle units in primarily tensile load bearing soft musculoskeletal tissues. Altering nanofiber orientation and geometry significantly affected mechanical properties; most notably aligned nanofiber sheets had the greatest modulus; 125% higher than that of random nanofiber sheets; and 45% higher than aligned nanofiber bundles. Modifying aligned nanofiber sheets to form aligned nanofiber bundles also resulted in approximately 107% higher yield stresses and 140% higher yield strains. The mechanical properties of aligned nanofiber bundles were in the range of the mechanical properties of the native ACL: modulus=158±32MPa, yield stress=57±23MPa and yield strain=0.38±0.08. Adipose derived stem cells cultured on all surfaces remained viable and proliferated extensively over a 7 day culture period and cells elongated on nanofiber bundles. The results of the study suggest that aligned nanofiber bundles may be useful for ligament and tendon tissue engineering based on their mechanical properties and ability to support cell adhesion, proliferation, and elongation.

  10. Surface modification of polyvinyl alcohol/malonic acid nanofibers by gaseous dielectric barrier discharge plasma for glucose oxidase immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Afshari, Esmail, E-mail: e.afshari@mail.sbu.ac.ir [Laser and Plasma Research Institute, Shahid Beheshti University, Evin, 1983963113 Tehran (Iran, Islamic Republic of); Mazinani, Saeedeh [Amirkabir Nanotechnology Research Institute (ANTRI), Amirkabir University of Technology, 15875-4413, Tehran (Iran, Islamic Republic of); Ranaei-Siadat, Seyed-Omid [Protein Research Center, Shahid Beheshti University, Evin, 1983963113 Tehran (Iran, Islamic Republic of); Ghomi, Hamid [Laser and Plasma Research Institute, Shahid Beheshti University, Evin, 1983963113 Tehran (Iran, Islamic Republic of)

    2016-11-01

    Highlights: • We fabricated polyvinyl alcohol/malonic acid nanofibers using electrospinning. • The surface nanofibers were modified by gaseous (air, nitrogen, CO{sub 2} and argon) dielectric barrier discharge. • Among them, air plasma had the most significant effect on glucose oxidase immobilization. • Chemical analysis showed that after modification of nanofibers by air plasma, the carboxyl group increased. • After air plasma treatment, reusability and storage stability of glucose oxidase immobilized on nanofibers improved. - Abstract: Polymeric nanofiber prepares a suitable situation for enzyme immobilization for variety of applications. In this research, we have fabricated polyvinyl alcohol (PVA)/malonic acid nanofibers using electrospinning. After fabrication of nanofibers, the effect of air, nitrogen, CO{sub 2}, and argon DBD (dielectric barrier discharge) plasmas on PVA/malonic acid nanofibers were analysed. Among them, air plasma had the most significant effect on glucose oxidase (GOx) immobilization. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrum analysis and X-ray photoelectron spectroscopy (XPS) results revealed that in case of air plasma modified nanofibers, the carboxyl groups on the surface are increased. The scanning electron microscopy (SEM) images showed that, after GOx immobilization, the modified nanofibers with plasma has retained its nanofiber structure. Finally, we analysed reusability and storage stability of GOx immobilized on plasma modified and unmodified nanofibers. The results were more satisfactory for modified nanofibers with respect to unmodified ones.

  11. Bioactive Carbohydrates and Peptides in Foods: An Overview of Sources, Downstream Processing Steps and Associated Bioactivities.

    Science.gov (United States)

    Hayes, Maria; Tiwari, Brijesh K

    2015-09-17

    Bioactive peptides and carbohydrates are sourced from a myriad of plant, animal and insects and have huge potential for use as food ingredients and pharmaceuticals. However, downstream processing bottlenecks hinder the potential use of these natural bioactive compounds and add cost to production processes. This review discusses the health benefits and bioactivities associated with peptides and carbohydrates of natural origin and downstream processing methodologies and novel processes which may be used to overcome these.

  12. Bioactive Carbohydrates and Peptides in Foods: An Overview of Sources, Downstream Processing Steps and Associated Bioactivities

    Directory of Open Access Journals (Sweden)

    Maria Hayes

    2015-09-01

    Full Text Available Bioactive peptides and carbohydrates are sourced from a myriad of plant, animal and insects and have huge potential for use as food ingredients and pharmaceuticals. However, downstream processing bottlenecks hinder the potential use of these natural bioactive compounds and add cost to production processes. This review discusses the health benefits and bioactivities associated with peptides and carbohydrates of natural origin and downstream processing methodologies and novel processes which may be used to overcome these.

  13. Polymer-inorganic core-shell nanofibers by electrospinning and atomic layer deposition: flexible nylon-ZnO core-shell nanofiber mats and their photocatalytic activity.

    Science.gov (United States)

    Kayaci, Fatma; Ozgit-Akgun, Cagla; Donmez, Inci; Biyikli, Necmi; Uyar, Tamer

    2012-11-01

    Polymer-inorganic core-shell nanofibers were produced by two-step approach; electrospinning and atomic layer deposition (ALD). First, nylon 6,6 (polymeric core) nanofibers were obtained by electrospinning, and then zinc oxide (ZnO) (inorganic shell) with precise thickness control was deposited onto electrospun nylon 6,6 nanofibers using ALD technique. The bead-free and uniform nylon 6,6 nanofibers having different average fiber diameters (∼80, ∼240 and ∼650 nm) were achieved by using two different solvent systems and polymer concentrations. ZnO layer about 90 nm, having uniform thickness around the fiber structure, was successfully deposited onto the nylon 6,6 nanofibers. Because of the low deposition temperature utilized (200 °C), ALD process did not deform the polymeric fiber structure, and highly conformal ZnO layer with precise thickness and composition over a large scale were accomplished regardless of the differences in fiber diameters. ZnO shell layer was found to have a polycrystalline nature with hexagonal wurtzite structure. The core-shell nylon 6,6-ZnO nanofiber mats were flexible because of the polymeric core component. Photocatalytic activity of the core-shell nylon 6,6-ZnO nanofiber mats were tested by following the photocatalytic decomposition of rhodamine-B dye. The nylon 6,6-ZnO nanofiber mat, having thinner fiber diameter, has shown better photocatalytic efficiency due to higher surface area of this sample. These nylon 6,6-ZnO nanofiber mats have also shown structural stability and kept their photocatalytic activity for the second cycle test. Our findings suggest that core-shell nylon 6,6-ZnO nanofiber mat can be a very good candidate as a filter material for water purification and organic waste treatment because of their photocatalytic properties along with structural flexibility and stability.

  14. Control of mechanical properties of chitin nanofiber film using glycerol without losing its characteristics.

    Science.gov (United States)

    Ifuku, Shinsuke; Ikuta, Akiko; Izawa, Hironori; Morimoto, Minoru; Saimoto, Hiroyuki

    2014-01-30

    Surface-deacetylated chitin nanofiber films plasticized with glycerol were prepared to control mechanical properties. Nanofiber networks were able to retain excessive glycerol content up to 70% to obtain self-standing film. All films were flexible and highly transparent independent of glycerol content. Glycerol significantly decreased the Young's moduli and tensile strengths, and increased the fracture strain due to its plasticizing effect. At the same time, glycerol did not change the high transparency or the low thermal expansion of the nanofiber film.

  15. Electrospun nanofibers of poly(vinyl pyrrolidone)/Eu3+ and its photoluminescence properties

    Institute of Scientific and Technical Information of China (English)

    Shan Shan Tang; Chang Lu Shao; Shou Zhu Li

    2007-01-01

    Nanofibers of poly(vinyl pyrrolidone) (PVP)/Eu3+ with diameters of 300-900 nm were prepared by using sol-gel processing and electrospinning technique. The products were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and photoluminescence (PL). The results indicated that, Eu3+ was successfully embedded in the onedimensional hybrid nanofibers, and the PVP/Eu3+ hybrid nanofibers had favorable photoluminescence properties.

  16. The Fabrication and Characterization of Piezoelectric PZT/PVDF Electrospun Nanofiber Composites

    OpenAIRE

    Ji Sun Yun; Chun Kil Park; Young Hun Jeong; Jeong Ho Cho; Jong-Hoo Paik; Sun Hong Yoon; Kyung-Ran Hwang

    2016-01-01

    Piezoelectric nanofiber composites of polyvinylidene fluoride (PVDF) polymer and PZT (Pb(Zr0.53Ti0.47)O3) ceramics were fabricated by electrospinning. The micro‐ structure of the PZT/PVDF electrospun nanofiber compo‐ sites was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The tensile properties (stress- strain curves) and electrical properties (P-E hysteresis loops) of the PZT/PVDF electrospun nanofiber composites w...

  17. Mathematical Models of Bead-Spring Jets during Electrospinning for Fabrication of Nanofibers

    OpenAIRE

    Thananchai DASRI

    2012-01-01

    Electrospinning is a popular technique to produce structures in the form of nanofibers. These nanofibers can be used for many applications such as filtration composites, insulator and energy storage. The technique is based on the electrostatic force that acts on the polymeric solution. However, during the electrospinning process the liquid jet shows unstable behavior. This problem causes the random formation of nanofibers. This article focuses on the mathematical models to describe the dynami...

  18. Silica-based nanofibers for electrospun ultra-thin layer chromatography.

    Science.gov (United States)

    Newsome, Toni E; Olesik, Susan V

    2014-10-17

    Nanofibrous silica-based stationary phases for electrospun ultra-thin layer chromatography (E-UTLC) are described. Nanofibers were produced by electrospinning a solution of silica nanoparticles dispersed in polyvinylpyrrolidone solutions to create composite silica/polymer nanofibers. Stationary phases were created from as-spun nanofibers, or the nanofibers were heated either to crosslink the polyvinylpyrrolidone or to calcine and selectively remove the polymer. As-spun, crosslinked, and calcined nanofibers with similar mat thicknesses (23-25 μm) were evaluated as stationary phases for E-UTLC separations of laser dyes and amino acids and compared to commercial silica TLC plates. As-spun nanofiber plates offered fast mobile phase velocities, but like other polymer-based nanofibers, separations were only compatible with techniques using nonsolvents of the polymer. Crosslinked nanofibers were not as limited in terms of chemical stability, but separations produced tailed spot shapes. No limitations in terms of mobile phases, analyte solvents, and visualization techniques were observed for calcined nanofibers. Highly efficient separations of amino acids were performed in 15 mm on calcined nanofiber plates, with observed plate heights as low as 8.6 μm, and plate numbers as large as 1400. Additional alignment of the nanofibers provided shorter analysis times but also larger spot widths. The extension of stationary phases to silica-based nanofibers vastly expands the range of mobile phases, analyte solvents, and visualization techniques which can be used for E-UTLC separations. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Carbon-coated Li3 N nanofibers for advanced hydrogen storage.

    Science.gov (United States)

    Xia, Guanglin; Li, Dan; Chen, Xiaowei; Tan, Yingbin; Tang, Ziwei; Guo, Zaiping; Liu, Huakun; Liu, Zongwen; Yu, Xuebin

    2013-11-20

    3D porous carbon-coated Li3 N nanofibers are successfully fabricated via the electrospinning technique. The as-prepared nanofibers exhibit a highly improved hydrogen-sorption performance in terms of both thermodynamics and kinetics. More interestingly, a stable regeneration can be achieved due to the unique structure of the nanofibers, over 10 cycles of H2 sorption at a temperature as low as 250 °C.

  20. Cavity QED on a nanofiber using a composite photonic crystal cavity

    CERN Document Server

    Yalla, Ramachandrarao; Nayak, Kali P; Hakuta, Kohzo

    2014-01-01

    We demonstrate cavity QED conditions in the Purcell regime for single quantum emitters on the surface of an optical nanofiber. The cavity is formed by combining an optical nanofiber and a nanofabricated grating to create a composite photonic crystal cavity. Using this technique, significant enhancement of the spontaneous emission rate into the nanofiber guided modes is observed for single quantum dots. Our results pave the way for enhanced on-fiber light-matter interfaces with clear applications to quantum networks.

  1. Continuous nanofiber yarns twisted through three-dimensional high-speed swirling airflow

    Directory of Open Access Journals (Sweden)

    He Jian-Xin

    2013-01-01

    Full Text Available A new method is proposed to fabricate continuous twisted nanofiber yarns. Nanofibers are bunched by a double conjugate electrospinning, and then twisted through a three-dimensional high-speed swirling airflow. Its principle and process are analyzed theoretically, and the airflow field inside the nozzle chamber is studied numerically, and mechanical properties of nanofiber yarns at different spinning conditions are systematically discussed.

  2. Novel Continuous Carbon Nanofibers for the Next Generation Lightweight Structural Nanocomposites

    Science.gov (United States)

    2007-05-01

    Presentations Dzenis, Y., "Novel Continuous Carbon Nanofibers and Nanocomposites", 2006 AFOSR Polymer Matrix Composite Review, Long Beach, April 2006...Dzenis, Y., "Novel Continuous Carbon Nanofibers and Nanocomposites", 2005 AFOSR Polymer Matrix Composite Review, San Diego, August 2005 Dzenis, Y., "Next...34Electrospinning of Nanofibers for Composite Laminates", 2004 Polymer Matrix Composite Review, Long Beach, CA, May 2004 (Presented by Dr. X. Wu) Dzenis

  3. Cavity quantum electrodynamics on a nanofiber using a composite photonic crystal cavity.

    Science.gov (United States)

    Yalla, Ramachandrarao; Sadgrove, Mark; Nayak, Kali P; Hakuta, Kohzo

    2014-10-01

    We demonstrate cavity QED conditions in the Purcell regime for single quantum emitters on the surface of an optical nanofiber. The cavity is formed by combining an optical nanofiber and a nanofabricated grating to create a composite photonic crystal cavity. By using this technique, significant enhancement of the spontaneous emission rate into the nanofiber guided modes is observed for single quantum dots. Our results pave the way for enhanced on-fiber light-matter interfaces with clear applications to quantum networks.

  4. Assessment of nickel oxide substituted bioactive glass-ceramic on in vitro bioactivity and mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Kumar Vyas, V.; Sampath Kumar, A.; Ali, A.; Prasad, S.; Srivastava, P.; Prasanna Mallick, S.; Ershad, Md.; Prasad Singh, S.; Pyare, R.

    2016-07-01

    Many type of oxide substituted glass-ceramics like strontium, cobalt, barium and titanium have shown bioactivity with improved mechanical properties. The present work reports the in vitro bioactivity and mechanical properties of nickel oxide substituted in bioactive glass-ceramic and results were compared with 45S5 bioactive glass-ceramic. Bioactive glass ceramics were processed through controlled crystallization of their respective bioactive glasses. The formed crystalline phases in bioactive glass-ceramics were identified using X-ray diffraction (XRD) analysis. The formation of HA layer was assessed by immersing them in the simulated body fluid (SBF) for different soaking periods. The formation of hydroxyapatite was confirmed by FTIR spectrometry, SEM and pH measurement. Densities and mechanical properties of the samples were found to increase considerably with an increasing the concentration of nickel oxide. A decrease in glass transition temperature (Tg) with NiO addition showed that the nickel oxide had acted as an intermediate in smaller quantities in the bioactive glass. The cell culture studies demonstrated that the samples containing low concentration of NiO from 0 to 1.65mol% were non-cytotoxic against osteoblast cells. Finally, this investigation clearly concluded that NiO doped bioactive glass would be potential biomaterials for biomedical applications. (Author)

  5. Flexural properties of experimental nanofiber reinforced composite are affected by resin composition and nanofiber/resin ratio.

    Science.gov (United States)

    Vidotti, Hugo A; Manso, Adriana P; Leung, Victor; do Valle, Accácio L; Ko, Frank; Carvalho, Ricardo M

    2015-09-01

    To evaluate the influence of different resin blends concentrations and nanofibers mass ratio on flexural properties of experimental Poliacrylonitrile (PAN) nanofibers reinforced composites. Poliacrylonitrile (PAN) nanofibers mats were produced by electrospinning and characterized by tensile testing and scanning electron microscopy (SEM). Experimental resin-fiber composite beams were manufactured by infiltrating PAN nanofiber mats with varied concentrations of BisGMA-TEGDMA resin blends (BisGMA/TEGDMA: 30/70, 50/50 and 70/30weight%). The mass ratio of fiber to resin varied from 0% to 8%. Beams were cured and stored in water at 37°C. Flexural strength (FS), flexural modulus (FM) and work of fracture (WF) were evaluated by three-point bending test after 24h storage. The tensile properties of the PAN nanofibers indicated an anisotropic behavior being always higher when tested in a direction perpendicular to the rotation of the collector drum. Except for WF, the other flexural properties (FS and FM) were always higher as the ratio of BisGMA to TEGDMA increased in the neat resin beams. The addition of different ratios of PAN fibers did not affect FS and FM of the composite beams as compared to neat resin beams (p>0.05). However, the addition of fibers significantly increased the WF of the composite beams, and this was more evident for the blends with higher TEGDMA ratios (presin blends did not negatively affect the properties of the composite and resulted in an increase in toughness that is a desirable property for a candidate material for prosthodontics application. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  6. Going viral: designing bioactive surfaces with bacteriophage.

    Science.gov (United States)

    Hosseinidoust, Zeinab; Olsson, Adam L J; Tufenkji, Nathalie

    2014-12-01

    Bacteriophage-functionalized bioactive surfaces are functional materials that can be used as antimicrobial surfaces in medical applications (e.g., indwelling medical devices or wound dressings) or as biosensors for bacterial capture and detection. Despite offering immense potential, designing efficient phage-functionalized bioactive surfaces is hampered by a number of challenges. This review offers an overview of the current state of knowledge in this field and presents a critical perspective of the technological promises and challenges.

  7. Bioactivities and Health Benefits of Wild Fruits

    OpenAIRE

    Ya Li; Jiao-Jiao Zhang; Dong-Ping Xu; Tong Zhou; Yue. Zhou; Sha Li; Hua-Bin Li

    2016-01-01

    Wild fruits are exotic or underutilized. Wild fruits contain many bioactive compounds, such as anthocyanins and flavonoids. Many studies have shown that wild fruits possess various bioactivities and health benefits, such as free radical scavenging, antioxidant, anti-inflammatory, antimicrobial, and anticancer activity. Therefore, wild fruits have the potential to be developed into functional foods or pharmaceuticals to prevent and treat several chronic diseases. In the present article, we rev...

  8. Microencapsulation of bioactives for food applications

    OpenAIRE

    Dias, Maria Inês; Isabel C. F. R. Ferreira; Barreiro, M.F.

    2015-01-01

    Health issues are an emerging concern to the world population, and therefore the food industry is searching for novel food products containing health-promoting bioactive compounds, with little or no synthetic ingredients. However, there are some challenges in the development of functional foods, particularly in which the direct use of some bioactives is involved. They can show problems of instability, react with other food matrix ingredients or present strong odour and/or flavours. In this co...

  9. Precisely Assembled Nanofiber Arrays as a Platform to Engineer Aligned Cell Sheets for Biofabrication

    Directory of Open Access Journals (Sweden)

    Vince Beachley

    2014-08-01

    Full Text Available A hybrid cell sheet engineering approach was developed using ultra-thin nanofiber arrays to host the formation of composite nanofiber/cell sheets. It was found that confluent aligned cell sheets could grow on uniaxially-aligned and crisscrossed nanofiber arrays with extremely low fiber densities. The porosity of the nanofiber sheets was sufficient to allow aligned linear myotube formation from differentiated myoblasts on both sides of the nanofiber sheets, in spite of single-side cell seeding. The nanofiber content of the composite cell sheets is minimized to reduce the hindrance to cell migration, cell-cell contacts, mass transport, as well as the foreign body response or inflammatory response associated with the biomaterial. Even at extremely low densities, the nanofiber component significantly enhanced the stability and mechanical properties of the composite cell sheets. In addition, the aligned nanofiber arrays imparted excellent handling properties to the composite cell sheets, which allowed easy processing into more complex, thick 3D structures of higher hierarchy. Aligned nanofiber array-based composite cell sheet engineering combines several advantages of material-free cell sheet engineering and polymer scaffold-based cell sheet engineering; and it represents a new direction in aligned cell sheet engineering for a multitude of tissue engineering applications.

  10. Morphology study of nanofibers produced by extraction from polymer blend fibers using image processing

    Energy Technology Data Exchange (ETDEWEB)

    Dehghan, Neda; Tavanaie, Mohammad Ali; Payvandy, Pedram [University of Yazd, Yazd (Iran, Islamic Republic of)

    2015-09-15

    The morphology of nanofibers extracted from the industrial-scale produced polypropylene/polybutylene terephthalate (PP/PBT) blend fibers was studied. To study the morphology and diameter measurements of the nanofibers, image processing method was used, and the results were compared with the results of a conventional visual method. Comparing these two methods indicated the good performance of image processing methods for the measuring of nanofiber diameter. Among the various applied image processing methods, the fuzzy c-means (FCM) method was determined as the best for image thresholding. Additionally, the distance transform method was determined as the best way for measuring nanofiber diameter. According to high regression coefficient (R=0.98) resulting between the draw ratio and nanofibers diameter, the high effectiveness of draw ratio to nanofiber diameter is concluded. The spherical (drop) shapes of the PBT dispersed phase particles were eventually deformed into very thin fibrils during the drawing process. The results of measuring the nanofiber diameters showed that the diameter means of nanofibers varied from 420 nm to 175 nm with the highest draw ratio. Good uniformity for diameter of nanofibers was observed, which had not been observed in previous works.

  11. Electrospinning preparation and electrical and biological properties of ferrocene/poly(vinylpyrrolidone composite nanofibers

    Directory of Open Access Journals (Sweden)

    Ji-Hong Chai

    2013-03-01

    Full Text Available Nanofibers containing ferrocene (Fc have been prepared for the first time by electrospinning. In this paper, Fc was dispersed uniformly throughout the poly(vinypyrrolidone (PVP matrix for the purpose of combining the properties of PVP and Fc. The effects of solvents and Fc concentration on the morphologies and diameters of nanofibers were investigated. In the DMF/ethanol solvent, the morphologies of the obtained nanofibers significantly changed with the increase of Fc concentration. The results demonstrated that the morphologies of the nanofibers could be controlled through adjusting solvents and Fc concentration. Scanning electron microscopy (SEM showed that the diameters of the obtained composite fibers were about 30–200 nm at different Fc concentrations. Thermogravimetric analysis (TGA results confirmed the presence of ferrocene within the PVP nanofibers. X-ray diffraction (XRD results showed that the crystalline structure of Fc in the fibers was amorphous after the electrospinning process. A biological evaluation of the antimicrobial activity of Fc/PVP nanofibers was carried out by using Gram-negative Escherichia coli (E. coli as model organisms. The nanofibers fabricated by this method showed obvious antibacterial activity. Electrochemical properties were characterized based on cyclic voltammetry measurements. The CV results showed redox peaks corresponding to the Fc+/Fc couple, which suggested that Fc molecules encapsulated inside PVP nanofibers retian their electrochemical activity. The properties and facile preparation method make the Fc/PVP nanofibers promising for antibacterial and sensing applications.

  12. Titanium Carbide Nanofibers-Reinforced Aluminum Compacts, a New Strategy to Enhance Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Khalil Abdelrazek Khalil

    2016-05-01

    Full Text Available TiC nanofibers reinforced Al matrix composites were produced by High Frequency Induction Heat Sintering (HFIHS.The titanium carbide nanofibers with an average diameter of 90 nm are first prepared by electrospinning technique and high temperature calcination process. A composite solution containing polyacrylonitrile and titanium isopropoxide is first electrospun into the nanofibers, which are subsequently stabilized and then calcined to produce the desired TiC nanofibers. The X-ray diffraction pattern and transmission electron microscopy results show that the main phase of the as-synthesized nanofibers is titanium carbide. The TiC nanofibers is then mixed with the aluminum powders and introduced into high frequency induction heat sintering (HFIHS to produce composites of TiC nanofibers reinforced aluminum matrix. The potential application of the TiC nanofibers reinforced aluminum matrix composites was systematically investigated. 99.5% relative density and around 85 HV (833 MPa Vickers hardness of the Al reinforced with 5 wt % TiC nanofiber has been obtained. Furthermore, the sample of Al contains 5 wt % TiC, has the highest value of compression and yield strength of about 415 and 350 MPa, respectively. The ductility of the Al/5 wt % TiC showed increasing with increasing the TiC contents.

  13. Production of Conductive PEDOT-Coated PVA-GO Composite Nanofibers

    Science.gov (United States)

    Zubair, Nur Afifah; Rahman, Norizah Abdul; Lim, Hong Ngee; Sulaiman, Yusran

    2017-02-01

    Electrically conductive nanofiber is well known as an excellent nanostructured material for its outstanding performances. In this work, poly(3,4-ethylenedioxythiophene) (PEDOT)-coated polyvinyl alcohol-graphene oxide (PVA-GO)-conducting nanofibers were fabricated via a combined method using electrospinning and electropolymerization techniques. During electrospinning, the concentration of PVA-GO solution and the applied voltage were deliberately altered in order to determine the optimized electrospinning conditions. The optimized parameters obtained were 0.1 mg/mL of GO concentration with electrospinning voltage of 15 kV, which displayed smooth nanofibrous morphology and smaller diameter distribution. The electrospun PVA-GO nanofiber mats were further modified by coating with the conjugated polymer, PEDOT, using electropolymerization technique which is a facile approach for coating the nanofibers. SEM images of the obtained nanofibers indicated that cauliflower-like structures of PEDOT were successfully grown on the surface of the electrospun nanofibers during the potentiostatic mode of the electropolymerization process. The conductive nature of PEDOT coating strongly depends on the different electropolymerization parameters, resulting in good conductivity of PEDOT-coated nanofibers. The optimum electropolymerization of PEDOT was at a potential of 1.2 V in 5 min. The electrochemical measurements demonstrated that the fabricated PVA-GO/PEDOT composite nanofiber could enhance the current response and reduce the charge transfer resistance of the nanofiber.

  14. Electrospun ion gel nanofibers for flexible triboelectric nanogenerator: electrochemical effect on output power

    Science.gov (United States)

    Ye, Byeong Uk; Kim, Byoung-Joon; Ryu, Jungho; Lee, Joo Yul; Baik, Jeong Min; Hong, Kihyon

    2015-10-01

    A simple fabrication route for ion gel nanofibers in a triboelectric nanogenerator was demonstrated. Using an electrospinning technique, we could fabricate a large-area ion gel nanofiber mat. The triboelectric nanogenerator was demonstrated by employing an ion gel nanofiber and the device exhibited an output power of 0.37 mW and good stability under continuous operation.A simple fabrication route for ion gel nanofibers in a triboelectric nanogenerator was demonstrated. Using an electrospinning technique, we could fabricate a large-area ion gel nanofiber mat. The triboelectric nanogenerator was demonstrated by employing an ion gel nanofiber and the device exhibited an output power of 0.37 mW and good stability under continuous operation. Electronic supplementary information (ESI) available: I. Experimental section. II. FTIR and XRD spectra of ion gel nanofiber. III. Output voltage of TENG with various polymer nanofibers. IV. Output voltage of TENG under different connection types. V. Output voltage of TENG with 20 wt% ion gel nanofibers. See DOI: 10.1039/c5nr02602d

  15. Novel electrospun gelatin/oxycellulose nanofibers as a suitable platform for lung disease modeling

    Energy Technology Data Exchange (ETDEWEB)

    Švachová, Veronika, E-mail: xcsvachova@fch.vutbr.cz [Institute of Materials Chemistry, Brno University of Technology (Czech Republic); Vojtová, Lucy [CEITEC – Central European Institute of Technology, Brno University of Technology (Czech Republic); SCITEG, a.s., Brno (Czech Republic); Pavliňák, David [Department of Physical Electronics, Masaryk University (Czech Republic); Vojtek, Libor [Institute of Experimental Biology, Masaryk University (Czech Republic); Sedláková, Veronika [Department of Histology and Embryology, Masaryk University (Czech Republic); International Clinical Research, St. Anne' s University Hospital, Brno (Czech Republic); Hyršl, Pavel [Institute of Experimental Biology, Masaryk University (Czech Republic); Alberti, Milan [Department of Physical Electronics, Masaryk University (Czech Republic); Jaroš, Josef; Hampl, Aleš [Department of Histology and Embryology, Masaryk University (Czech Republic); International Clinical Research, St. Anne' s University Hospital, Brno (Czech Republic); Jančář, Josef [Institute of Materials Chemistry, Brno University of Technology (Czech Republic); CEITEC – Central European Institute of Technology, Brno University of Technology (Czech Republic); SCITEG, a.s., Brno (Czech Republic)

    2016-10-01

    Novel hydrolytically stable gelatin nanofibers modified with sodium or calcium salt of oxycellulose were prepared by electrospinning method. The unique inhibitory effect of these nanofibers against Escherichia coli bacteria was examined by luminometric method. Biocompatibility of these gelatin/oxycellulose nanofibers with eukaryotic cells was tested using human lung adenocarcinoma cell line NCI-H441. Cells firmly adhered to nanofiber surface, as determined by scanning electron microscopy, and no signs of cell dying were detected by fluorescent live/dead assay. We propose that the newly developed gelatin/oxycellulose nanofibers could be used as promising scaffold for lung disease modeling and anti-cancer drug testing. - Highlights: • Novel hydrolytically stable gelatin nanofibers modified with oxycellulose were prepared by electrospinning. • ATR–FTIR spectroscopy and EDX confirmed the presence of oxycellulose in the nanofibers. • Nanofibers modified with calcium salt of oxycellulose exhibited significant antibacterial properties. • Nanofibers modified with sodium salt of oxycellulose revealed excellent biocompatibility with cell line NCI-H441.

  16. Electrical properties of in-situ grown and transferred organic nanofibers

    Science.gov (United States)

    Hansen, Roana Melina de Oliveira; Madsen, Morten; Kjelstrup-Hansen, Jakob; Pedersen, Rasmus Haugstrup; Gadegaard, Nikolaj; Rubahn, Horst-Guenter

    2010-08-01

    Para-hexaphenylene (p6P) molecules have the ability to self-assemble into organic nanofibers, which exhibit a range of interesting optical and optoelectronic properties such as intense, polarized luminescence, waveguiding and lasing. The nanofibers are typically grown on specific single-crystalline templates, such as muscovite mica, on which mutually parallel nanofibers are self-assembled upon vapor deposition of the organic material under high vacuum conditions. Besides such single-crystalline templates, the nanofibers can also be grown on non-crystalline gold surfaces, on which the orientation of the nanofibers can be manipulated by structuring the gold surface prior to parahexaphenylene (p6P) deposition. In this work it is demonstrated, how such organic nanofiber growth can be controlled by modifying the design of the underlying gold structures prior to growth. Here, the investigated designs include pinning lines and gratings. We demonstrate how gold gratings fabricated on an insulating substrate can enable electrical contact to in-situ grown p6P nanofibers. Furthermore, the electrical characteristics of in-situ grown fibers are compared to that of transferred p6P nanofibers. The transferred nanofibers are initially grown on muscovite mica, and subsequently transferred onto a target substrate by drop casting, and electrodes are applied on top by a special shadow mask technique.

  17. Preparation and Photocatalysis of Mesoporous TiO2 Nanofibers via an Electrospinning Technique

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; YUAN Qing; CHI Yue; SHAO Chang-lu; LI Nan; LI Xiao-tian

    2012-01-01

    Mesoporous TiO2 nanofibers have been synthesized by a new method that combines sol-gel chemistry and electrospinning technique.The obtained mesoporous TiO2 nanofibers were characterized with scanning electron microscopy(SEM),X-ray diffraction(XRD),transmission electron microscopy(TEM) and nitrogen adsorptiondesorption isotherms.The photocatalytic performance was evaluated by the photocatalytic degradation of Rhodamine B undcr UV light irradiation.The results show that mesoporous TiO2 nanofibers exhibit higher photocatalytic activity compared with nonporous TiO2 nanofibers.

  18. Aligned Electrospun Polyvinyl Pyrrolidone/Poly ɛ-Caprolactone Blend Nanofiber Mats for Tissue Engineering

    Science.gov (United States)

    Charernsriwilaiwat, Natthan; Rojanarata, Theerasak; Ngawhirunpat, Tanasait; Opanasopit, Praneet

    2016-02-01

    Electrospun nanofibrous materials are widely used in medical applications such as tissue engineering scaffolds, wound dressing material and drug delivery carriers. For tissue engineering scaffolds, the structure of the nanofiber is similar to extracellular matrix (ECM) which promotes the cell growth and proliferation. In the present study, the aligned nanofiber mats of polyvinyl pyrrolidone (PVP) blended poly ɛ-caprolactone (PCL) was successfully generated using electrospinning technique. The morphology of PVP/PCL nanofiber mats were characterized by scanning electron microspore (SEM). The chemical and crystalline structure of PVP/PCL nanofiber mats were analyzed using Fourier transform infrared spectroscopy (FTIR) and powder X-ray diffactometer (PXRD). The water contact angle of mats was investigated. Cell culture studies using normal human fibroblasts (NHF) were performed to assess cell morphology, cell alignment and cell proliferation. The results indicated that the fiber were in nanometer range. The PVP/PCL was well dispersed in nanofiber mats and was in amorphous form. The water contact angle of PVP/PCL nanofiber mats was lower than PCL nanofiber mats. The PVP/PCL nanofiber mats exhibited good biocompatibility with NHF cells. In summary, the PVP/PCL nanofiber mats had potential to be used in tissue engineering and regenerative medicine.

  19. Influence of TiO2 nanofiber additives for high efficient dye-sensitized solar cells.

    Science.gov (United States)

    Hwang, Kyung-Jun; Lee, Jae-Wook; Park, Ju-Young; Kim, Sun-Il

    2011-02-01

    TiO2 nanofibers were prepared from a mixture of titanium-tetra-isopropoxide and poly vinyl pyrrolidone by applying the electrospinning method. The samples were characterized by XRD, FE-SEM, TEM and BET analyses. The diameter of electrospun TiO2 nanofibers is in the range of 70 approximately 160 nm. To improve the short-circuit photocurrent, we added the TiO2 nanofibers in the TiO2 electrode of dye-sensitized solar cells (DSSCs). TiO2 nanofibers added in DSSCs can make up to 20% more conversion energy than the conventional DSSC with only TiO2 films only.

  20. Preparation of chitosan nanofibers from completely deacetylated chitosan powder by a downsizing process.

    Science.gov (United States)

    Aklog, Yihun Fantahun; Dutta, Ajoy Kumar; Izawa, Hironori; Morimoto, Minoru; Saimoto, Hiroyuki; Ifuku, Shinsuke

    2015-01-01

    Chitosan nanofibers were easily prepared from fully deacetylated chitosan dry powder using a high-pressure waterjet system. From SEM observation, after 10 cycles of treatment, most of the chitosan had been reduced to homogeneous nanofibers measuring tens of nanometers. On the other hand, further mechanical treatment did not show a significant change. Relative crystallinity of chitosan nanofibers gradually decreased as the number of passes increased since high-pressure waterjet treatment damaged the crystalline region of chitosan nanofibers. The transmittance of the chitosan nanofiber slurry increased steeply, as the number of passes increased, indicating that the chitosan fibers were disintegrated effectively. Viscosity of chitosan nanofiber slurry also showed that the chitosan disintegrated well into nanofibers up to 10 passes. Above 10 passes, disintegration efficiency was saturated. The molecular weights of the nanofibers steeply decreased due to the depolymerization of chitosan by mechanical disintegration. The Young's modulus and tensile strength of chitosan nanofiber sheets were improved as the number of treatments increased, but further treatments deteriorated the tensile strength.

  1. Electrospun Polycaprolactone/Polylactic Acid Nanofibers as an Artificial Nerve Conduit

    Directory of Open Access Journals (Sweden)

    Zeeshan Ali Khatri

    2014-07-01

    Full Text Available Development of conduits made of biodegradable nanofibers is gaining substantial interest due to their suitability for nerve regeneration. Among all polymeric nanofibers PCL (Poly ?-Caprolactone is distinctively found for mechanical stability and PLLA (Poly (L-Lactic Acid for relatively faster biodegradability. The aim of this study is to investigate blending compatibility between PCL and PLLA and the ability to fabricate nanofibers conduits via electro spinning. The PCL-PLLA nano-fiber tubular made from different blend ratios of PCL-PLLA were electro spun. The electro spun nanofibers were continuously deposited over high speed rotating mandrel to fabricate nanofibers conduit having inner diameter of 2mm and the wall thickness of 55-65µm. The diameters of nano-fibers were between 715-860nm. FTIR (Fourier Transform Infrared spectroscopy used to analyze chemical change in the blends of nerve conduits, which revealed that the PCL-PLLA blend nanofiber exhibit characteristic peaks of both PCL and PLLA and was composition dependent. The crystallinity of PCL-PLLA tubes were studied using WAXD (Wide Angle Xray Diffraction. The morphology of nanofibers were investigated under SEM (Scanning Electron Microscope. The mechanical properties of the conduits were also tested; the Young?s modulus obtained for small diameter was 10MPa, twice as high as larger diameter.

  2. Preparation and characterization of Ag nanoparticle-embedded polymer electrospun nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Dong Guoping, E-mail: guoping_dong@163.com; Xiao Xiudi; Liu, Xiaofeng; Qian Bin [Chinese Academy of Sciences, Shanghai Institute of Optics and Fine Mechanics (China); Ma Zhijun; Ye Song [Zhejiang University, State Key Laboratory of Silicon Materials (China); Chen Danping [Chinese Academy of Sciences, Shanghai Institute of Optics and Fine Mechanics (China); Qiu Jianrong, E-mail: jrqiu@zju.edu.c [Zhejiang University, State Key Laboratory of Silicon Materials (China)

    2010-05-15

    Poly (vinyl alcohol) (PVA) and poly (vinyl pyrrolidone) (PVP) nanofibers embedding Ag nanoparticles (5-18 nm) have been prepared successfully by electrospinning at room temperature. Scanning electron microscope (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Fourier transform IR spectra (FTIR), and Raman scattering were used to characterize the structure and properties of Ag nanoparticle-embedded PVA and PVP nanofibers before and after heat treatment at different temperature. The antibacterial activity of Ag nanoparticle-embedded PVP nanofibers after heat treatment was also tested, which indicated that the biological activity of yeast cells was effectively inhibited by these Ag nanoparticle-embedded PVP nanofibers.

  3. Cells Attachment Property of PVA Hydrogel Nanofibers Incorporating Hyaluronic Acid for Tissue Engineering

    OpenAIRE

    2011-01-01

    In this work, we report the fabrication and cell affinity studies of the poly(vinyl alcohol) (PVA)/hyaluronic acid (HA) cross-linked nanofibers via electrospinning and post cross-linking. FT-IR and TGA analysis demonstrate that HA is not influenced by acid environment such as HCl vapor during cross-linking, and well incorporated into PVA nanofibers. Swelling behavior and cell adhesion of the PVA/HA hydrogel nanofibers are investigated and compared with pure PVA hydrogel nanofibers. It is expe...

  4. Preparation of poly (Vinyl Alcohol) nanofibers containing silver nanoparticles by gamma-ray irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yun Hye [AMOTECH Co., Ltd., Kimpo (Korea, Republic of); Shin, Jun Wha; An, Sung Jun; Youn, Min Ho; Lim, Youn Mook; Gwon, Hui Jeong; Nho, Young Chang [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2008-08-15

    PVA nanofibers containing silver nanoparticles were prepared by two methods. The first method was electrospinning of irradiated solution. The prepared PVA/AgNO{sub 3} solution was irradiated by gamma-rays. And then the irradiated solution was electrospun. The second method was irradiation of electrospun nanofibers. Nanofibers prepared by electrospinning of unirradiated PVA/AgNO{sub 3} solution. The morphology of the nanofibers was observed with a SEM, TEM. When the irradiated PVA/AgNO{sub 3} solution were electrospun, the average size of the Ag nanoparticles was increased, but their number was decreased.

  5. (Au/PANA/PVAc) nanofibers as a novel composite matrix for albumin and streptavidin immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Golshaei, Rana [University of Kashan, Institute of Nano Science and Nano Technology, Kashan, P.O. Box 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Guler, Zeliha [Istanbul Technical University, Nanoscience and Nanoengineering, Maslak, Istanbul 34469 (Turkey); Sarac, Sezai A., E-mail: sarac@itu.edu.tr [Istanbul Technical University, Nanoscience and Nanoengineering, Maslak, Istanbul 34469 (Turkey); Istanbul Technical University, Department of Chemistry and Polymer Science and Technology, Maslak, Istanbul 34469 (Turkey)

    2016-03-01

    A novel electrospun nanofiber mat (Au/PANA/PVAc) consists of (Gold/Poly Anthranilic acid) (Au/PANA) core/shell nanostructures as a support material for protein immobilization that was developed and characterized by electrochemical impedance spectroscopy. In the core/shells, PANA served carboxyl groups (− COOH) for covalent protein immobilization and Au enhanced the electrochemical properties by acting as tiny conduction centers to facilitate electron transfer. Covalent immobilization of albumin and streptavidin as model proteins onto the (Au/PANA/PVAc) nanofibers was carried out by using 1-ethyl-3-(dimethyl-aminopropyl) carbodiimide hydrochloride (EDC)/N-hydroxyl succinimide (NHS) activation. PVAc nanofibers were compared with Au/PANA/PVAc nanofibers before and after protein immobilization. The successful covalent binding of both albumin and streptavidin onto (Au/PANA/PVAc) nanofibers was confirmed by FTIR-ATR, Electron Microscopy/Energy-Dispersive X-ray Spectroscopy SEM/EDX and Electrochemical impedance spectroscopy (EIS). The nanofibers became resistive due to protein immobilization and the higher charge transfer resistance was observed after higher amount of protein was immobilized. - Highlights: • Au/PANA/PVAc nanofibers with (COOH) groups as a suitable supports for covalent immobilization of proteins. • Increasing of the resistivity of the nanofibers after immobilization of the proteins. • Activation of Au/PANA/PVAc nanofibers by using EDC/NHS.

  6. Spectroscopy, Manipulation and Trapping of Neutral Atoms, Molecules, and Other Particles Using Optical Nanofibers: A Review

    Science.gov (United States)

    Morrissey, Michael J.; Deasy, Kieran; Frawley, Mary; Kumar, Ravi; Prel, Eugen; Russell, Laura; Truong, Viet Giang; Chormaic, Síle Nic

    2013-01-01

    The use of tapered optical fibers, i.e., optical nanofibers, for spectroscopy and the detection of small numbers of particles, such as neutral atoms or molecules, has been gaining interest in recent years. In this review, we briefly introduce the optical nanofiber, its fabrication, and optical mode propagation within. We discuss recent progress on the integration of optical nanofibers into laser-cooled atom and vapor systems, paying particular attention to spectroscopy, cold atom cloud characterization, and optical trapping schemes. Next, a natural extension of this work to molecules is introduced. Finally, we consider several alternatives to optical nanofibers that display some advantages for specific applications. PMID:23945738

  7. Spectroscopy, Manipulation and Trapping of Neutral Atoms, Molecules, and Other Particles using Optical Nanofibers: A Review

    CERN Document Server

    Morrissey, Michael J; Frawley, Mary; Kumar, Ravi; Prel, Eugen; Russell, Laura; Truong, Viet Giang; Chormaic, Síle Nic

    2013-01-01

    The use of tapered optical fibers, i.e., optical nanofibers, for spectroscopy and the detection of small numbers of particles, such as neutral atoms or molecules, has been gaining ground in recent years. In this review, we briefly introduce the optical nanofiber, its fabrication and optical mode propagation within. We discuss recent progress on the integration of optical nanofibers into laser-cooled atom and vapor systems, paying particular attention to spectroscopy, cold atom cloud characterization and optical trapping schemes. Next, a natural extension on this work to molecules will be introduced. Finally, we consider several alternatives to optical nanofibers that display some advantages for particular applications.

  8. Spectroscopy, Manipulation and Trapping of Neutral Atoms, Molecules, and Other Particles Using Optical Nanofibers: A Review

    Directory of Open Access Journals (Sweden)

    Síle Nic Chormaic

    2013-08-01

    Full Text Available The use of tapered optical fibers, i.e., optical nanofibers, for spectroscopy and the detection of small numbers of particles, such as neutral atoms or molecules, has been gaining interest in recent years. In this review, we briefly introduce the optical nanofiber, its fabrication, and optical mode propagation within. We discuss recent progress on the integration of optical nanofibers into laser-cooled atom and vapor systems, paying particular attention to spectroscopy, cold atom cloud characterization, and optical trapping schemes. Next, a natural extension of this work to molecules is introduced. Finally, we consider several alternatives to optical nanofibers that display some advantages for specific applications.

  9. Biomolecule immobilization techniques for bioactive paper fabrication.

    Science.gov (United States)

    Kong, Fanzhi; Hu, Yim Fun

    2012-04-01

    Research into paper-based sensors or functional materials that can perform analytical functions with active recognition capabilities is rapidly expanding, and significant research effort has been made into the design and fabrication of bioactive paper at the biosensor level to detect potential health hazards. A key step in the fabrication of bioactive paper is the design of the experimental and operational procedures for the immobilization of biomolecules such as antibodies, enzymes, phages, cells, proteins, synthetic polymers and DNA aptamers on a suitably prepared paper membrane. The immobilization methods are concisely categorized into physical absorption, bioactive ink entrapment, bioaffinity attachment and covalent chemical bonding immobilization. Each method has individual immobilization characteristics. Although every biomolecule-paper combination has to be optimized before use, the bioactive ink entrapment method is the most commonly used approach owing to its general applicability and biocompatibility. Currently, there are four common applications of bioactive paper: (1) paper-based bioassay or paper-based analytical devices for sample conditioning; (2) counterfeiting and countertempering in the packaging and construction industries; (3) pathogen detection for food and water quality monitoring; and (4) deactivation of pathogenic bacteria using antimicrobial paper. This article reviews and compares the different biomolecule immobilization techniques and discusses current trends. Current, emerging and future applications of bioactive paper are also discussed.

  10. Advances on Bioactive Polysaccharides from Medicinal Plants.

    Science.gov (United States)

    Xie, Jian-Hua; Jin, Ming-Liang; Morris, Gordon A; Zha, Xue-Qiang; Chen, Han-Qing; Yi, Yang; Li, Jing-En; Wang, Zhi-Jun; Gao, Jie; Nie, Shao-Ping; Shang, Peng; Xie, Ming-Yong

    2016-07-29

    In recent decades, the polysaccharides from the medicinal plants have attracted a lot of attention due to their significant bioactivities, such as anti-tumor activity, antioxidant activity, anticoagulant activity, antidiabetic activity, radioprotection effect, anti-viral activity, hypolipidemic and immunomodulatory activities, which make them suitable for medicinal applications. Previous studies have also shown that medicinal plant polysaccharides are non-toxic and show no side effects. Based on these encouraging observations, most researches have been focusing on the isolation and identification of polysaccharides, as well as their bioactivities. A large number of bioactive polysaccharides with different structural features and biological effects from medicinal plants have been purified and characterized. This review provides a comprehensive summary of the most recent developments in physiochemical, structural features and biological activities of bioactive polysaccharides from a number of important medicinal plants, such as polysaccharides from Astragalus membranaceus, Dendrobium plants, Bupleurum, Cactus fruits, Acanthopanax senticosus, Angelica sinensis (Oliv.) Diels, Aloe barbadensis Miller, and Dimocarpus longan Lour. Moreover, the paper has also been focused on the applications of bioactive polysaccharides for medicinal applications. Recent studies have provided evidence that polysaccharides from medicinal plants can play a vital role in bioactivities. The contents and data will serve as a useful reference material for further investigation, production, and application of these polysaccharides in functional foods and therapeutic agents.

  11. Basic fibroblast growth factor-loaded, mineralized biopolymer-nanofiber scaffold improves adhesion and proliferation of rat mesenchymal stem cells.

    Science.gov (United States)

    Kim, Tae-Hyun; Kim, Jung-Ju; Kim, Hae-Won

    2014-02-01

    Nanofibrous matrices are attractive scaffolding platforms for tissue regeneration. Modification of the nanofiber surface, particularly with biological proteins, improves cellular interactions. Here, we loaded basic fibroblast growth factor (bFGF) onto mineralized nanofibers and investigated the effect on adhesion and proliferation of rat mesenchymal stem cells. bFGF loading was significantly higher on the mineralized nanofiber than on the non-mineralized one. Release of bFGF from the mineralized nanofibers was continuous over 2 weeks. Cells cultured on the bFGF-loaded nanofiber attached and proliferated in significantly higher numbers than those on the bFGF-free nanofiber. bFGF-receptor inhibition study confirmed the biological role played by the loaded bFGF. This study details the advantages of the mineralized nanofiber surface for the loading and delivery bFGF, and thus the bFGF-loaded nanofiber scaffold may be useful for tissue repair and regeneration.

  12. Speechreading Instruction for Children.

    Science.gov (United States)

    Yoshinaga-Itano, Christine

    1988-01-01

    This holistic approach to speechreading instruction proposes: enhancement of the child's self-motivation, strategy-based instruction, an interactive processing approach that focuses on meaning and psycholinguistic guessing, bisensory instruction, and a hierarchical continuum beginning with easy, successful activities that gradually increase in…

  13. Clinical evaluation of bioactive glass in the treatment of periodontal osseous defects in humans.

    Science.gov (United States)

    Lovelace, T B; Mellonig, J T; Meffert, R M; Jones, A A; Nummikoski, P V; Cochran, D L

    1998-09-01

    The purpose of this study was to compare the use of bioactive glass to demineralized freeze-dried bone allograft (DFDBA) in the treatment of human periodontal osseous defects. Fifteen systemically healthy patients (6 males and 9 females, aged 30 to 63) with moderate to advanced adult periodontitis were selected for the study. All patients underwent initial therapy, which included scaling and root planing, oral hygiene instruction, and an occlusal adjustment when indicated, followed by re-evaluation 4 to 6 weeks later. Paired osseous defects in each subject were randomly selected to receive grafts of bioactive glass or DFDBA. Both soft and hard tissue measurements were taken the day of surgery (baseline) and at the 6-month re-entry surgery. The clinical examiner was calibrated and blinded to the surgical procedures, while the surgeon was masked to the clinical measurements. Statistical analysis was performed by using the paired Student's t test. The results indicated that probing depths were reduced by 3.07 +/- 0.80 mm with the bioactive glass and 2.60 +/- 1.40 mm with DFDBA. Sites grafted with bioactive glass resulted in 2.27 +/- 0.88 mm attachment level gain, while sites grafted with DFDBA had a 1.93 +/- 1.33 mm gain in attachment. Bioactive glass sites displayed 0.53 +/- 0.64 mm of crestal resorption and 2.73 mm bone fill. DFDBA-grafted sites experienced 0.80 +/- 0.56 mm of crestal resorption and 2.80 mm defect fill. The use of bioactive glass resulted in 61.8% bone fill and 73.33% defect resolution. DFDBA-grafted defects showed similar results, with 62.5% bone fill and 80.87% defect resolution. Both treatments provided soft and hard tissue improvements when compared to baseline (P < or = 0.0001). No statistical difference was found when comparing bioactive glass to DFDBA; however, studies with larger sample sizes may reveal true differences between the materials. This study suggests that bioactive glass is capable of producing results in the short term (6 months

  14. Electrospun nanofiber reinforcement of dental composites with electromagnetic alignment approach

    Energy Technology Data Exchange (ETDEWEB)

    Uyar, Tansel [Department of Biomedical Engineering, Başkent University Bağlıca Campus, 06530 Ankara (Turkey); Çökeliler, Dilek, E-mail: cokeliler@baskent.edu.tr [Department of Biomedical Engineering, Başkent University Bağlıca Campus, 06530 Ankara (Turkey); Doğan, Mustafa [Department of Electrical and Electronics Engineering, Başkent University, Ankara 06180 (Turkey); Koçum, Ismail Cengiz [Department of Biomedical Engineering, Başkent University Bağlıca Campus, 06530 Ankara (Turkey); Karatay, Okan [Department of Electrical and Electronics Engineering, Başkent University, Ankara 06180 (Turkey); Denkbaş, Emir Baki [Department of Chemistry, Biochemistry Division, Hacettepe University, Ankara (Turkey)

    2016-05-01

    Polymethylmethacrylate (PMMA) is commonly used as a base acrylic denture material with benefits of rapid and easy handling, however, when it is used in prosthetic dentistry, fracturing or cracking problems can be seen due to the relatively low strength issues. Besides, acrylic resin is the still prominent material for denture fabrication due to its handy and low cost features. Numerous proposed fillers that are used to produce PMMA composites, however electrospun polyvinylalcohol (PVA) nanofiber fillers for production of PMMA composite resins are not studied as much as the others. The other focus of the practice is to compare both mechanical properties and efficiency of aligned fibers versus non-aligned PVA nanofibers in PMMA based dental composites. Field-controlled electrospinning system is manufactured and provided good alignment in lab scale as one of contributions. Some novel auxiliary electrodes in controlled structure are augmented to obtain different patterns of alignment with a certain range of fiber diameters. Scanning electron microscopy is used for physical characterization to determine the range of fiber diameters. Non-woven fiber has no unique pattern due to chaotic nature of electrospinning process, but aligned fibers have round pattern or crossed lines. These produced fibers are structured as layer-by-layer form with different features, and these features are used in producing PMMA dental composites with different volume ratios. The maximum flexural strength figure shows that fiber load by weight of 0.25% w/w and above improves in the maximum level. As a result, mechanical properties of PMMA dental composites are improved by using PVA nanofibers as a filler, however the improvement was higher when aligned PVA nanofibers are used. The maximum values were 5.1 MPa (flexural strength), 0.8 GPa (elastic modulus), and 170 kJ/m{sup 3} (toughness) in three-point bending test. In addition to the positive results of aligned and non-aligned nanofibers it was

  15. Nanofiber adsorbents for high productivity continuous downstream processing.

    Science.gov (United States)

    Hardick, Oliver; Dods, Stewart; Stevens, Bob; Bracewell, Daniel G

    2015-11-10

    An ever increasing focus is being placed on the manufacturing costs of biotherapeutics. The drive towards continuous processing offers one opportunity to address these costs through the advantages it offers. Continuous operation presents opportunities for real-time process monitoring and automated control with potential benefits including predictable product specification, reduced labour costs, and integration with other continuous processes. Specifically to chromatographic operations continuous processing presents an opportunity to use expensive media more efficiently while reducing their size and therefore cost. Here for the first time we show how a new adsorbent material (cellulosic nanofibers) having advantageous convective mass transfer properties can be combined with a high frequency simulated moving bed (SMB) design to provide superior productivity in a simple bioseparation. Electrospun polymeric nanofiber adsorbents offer an alternative ligand support surface for bioseparations. Their non-woven fiber structure with diameters in the sub-micron range creates a remarkably high surface area material that allows for rapid convective flow operations. A proof of concept study demonstrated the performance of an anion exchange nanofiber adsorbent based on criteria including flow and mass transfer properties, binding capacity, reproducibility and life-cycle performance. Binding capacities of the DEAE adsorbents were demonstrated to be 10mg/mL, this is indeed only a fraction of what is achievable from porous bead resins but in combination with a very high flowrate, the productivity of the nanofiber system is shown to be significant. Suitable packing into a flow distribution device has allowed for reproducible bind-elute operations at flowrates of 2,400 cm/h, many times greater than those used in typical beaded systems. These characteristics make them ideal candidates for operation in continuous chromatography systems. A SMB system was developed and optimised to

  16. High Sensitive Sensor Fabricated by Reduced Graphene Oxide/Polyvinyl Butyral Nanofibers for Detecting Cu (II) in Water

    OpenAIRE

    2015-01-01

    Graphene oxide (GO)/polyvinyl butyral (PVB) nanofibers were prepared by a simple electrospinning technique with PVB as matrix and GO as a functional nanomaterial. GO/PVB nanofibers on glassy carbon electrode (GCE) were reduced through electrochemical method to form reduced graphene oxide (RGO)/PVB nanofibers. The morphology and structure of GO/PVB nanofiber were studied by scanning election microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR). RGO/PV...

  17. Method for producing and controlling the morphology of metal-oxide nanofiber and/or nanotube catalysts

    DEFF Research Database (Denmark)

    2015-01-01

    Disclosed herein is a process for the controlled production of metal-containing nanofibers and/or nanotubes, where the morphology of the nanofibers and/or nanotubes is followed in real time by TEM measurements.......Disclosed herein is a process for the controlled production of metal-containing nanofibers and/or nanotubes, where the morphology of the nanofibers and/or nanotubes is followed in real time by TEM measurements....

  18. Electrospinning of alginate/soy protein isolated nanofibers and their release characteristics for biomedical applications

    Directory of Open Access Journals (Sweden)

    Ratchada Wongkanya

    2017-09-01

    Full Text Available Natural polymer-based nanofibers with functions of loading and releasing bioactive cues or drugs have recently gained interest for biomedical applications. Nanotopography and large surface area to volume ratio of hydrophilic polymer fibers promote their use as carriers of hydrophilic drugs. Here, sodium alginate (SA and soy protein isolated (SPI blended fibers encapsulated with vancomycin were fabricated via electrospinning with the assistance of poly(ethylene oxide (PEO. Morphological results showed submicron-sized, smooth and uniform as-spun SA/PEO/SPI fibers with an average diameter of 200 nm. Beads on the fiber mats were formed with increasing SPI content in the blending system. The optimal polymer composition of the electrospinning solution was determined as 5.6/2.4/2 SA/PEO/SPI. Polymer blends were maintained after ionic “cross-linking”, as indicated by the FTIR result. Investigation of release characteristic of vancomycin-loaded SA/PEO/SPI electrospun fibers exhibited initial burst release followed by a controlled release after 2 days of immersion in a phosphate buffered saline. The release rate of SA/PEO/SPI fibers was significantly slower than that of SA/PEO fibers, and drug-loaded fibers inhibited bacterial growth against Staphylococcus aureus after 24 h of incubation. Non-toxicity and biocompatibility of the fibers were confirmed by an indirect cytotoxicity test using human dermal fibroblasts. These results suggest that the vancomycin-loaded SA/PEO/SPI blended fibers are a promising nanomaterial for use in biomedical fields such as scaffolds for tissue engineering and drug delivery systems.

  19. Comparison of Titanium Dioxide (TiO2) nanoparticle-nanofiber and nanofiber-nanoparticle on the application of dye-sensitized solar cell (DSSC)

    Science.gov (United States)

    Kusumaning Tyas, Linda; Suryana, Risa; Nurosyid, Fahru; Asma Ilahi, Novita

    2017-01-01

    Dye-sensitized Solar Cell (DSSC) is a solar cell that has great potential in the future because of the cheaper cost of fabrication and environmentally friendly basic ingredients. This study aims to determine the effect of type of screen on the TiO2 layer as the active electrode DSSC. The active electrode TiO2 based DSSC fabricated by the method of double layer. Efficiency Dye-sensitized Solar Cell (DSSC) can be obtained from the current-voltage curve I-V meter. Nanofiber on the nanoparticles can reach a highest efficiency of DSSC about 0,015%. The second variation of between nanofiber-nanoparticle layering, and nanoparticle-nanofiber, it appears that the nanofiber layer of nanoparticles above, no significant changes, namely in 10 minutes η = 0.014965; 15 minutes η = 0.011021 and 20 minutes η = 0.013332. This is demonstrated by the nature of the dominant nanofiber as a photon trap covered by the nature of the dominant nanoparticles absorb the dye, so that overtime does not affect the incoming electron. While the results of nanofiber layer on the nanoparticles changed significantly in the variation of 20 minutes, ie η = 0.00283. You can also see the most optimum time was 15 minutes, which is η = 0.01559. This may be due in this 15 minute nanofiber coating has a thickness that is optimum so that electrons can reach the electrode diffuse due to the interaction between photons and the dye more.

  20. A novel nano-nonwoven fabric with three-dimensionally dispersed nanofibers: entrapment of carbon nanofibers within nonwovens using the wet-lay process

    Science.gov (United States)

    Karwa, Amogh N.; Barron, Troy J.; Davis, Virginia A.; Tatarchuk, Bruce J.

    2012-05-01

    This study demonstrates, for the first time, the manufacturing of novel nano-nonwovens that are comprised of three-dimensionally distributed carbon nanofibers within the matrices of traditional wet-laid nonwovens. The preparation of these nano-nonwovens involves dispersing and flocking carbon nanofibers, and optimizing colloidal chemistry during wet-lay formation. The distribution of nanofibers within the nano-nonwoven was verified using polydispersed aerosol filtration testing, air permeability, low surface tension liquid capillary porometry, SEM and cyclic voltammetry. All these characterization techniques indicated that nanofiber flocks did not behave as large solid clumps, but retained the ‘nanoporous’ structure expected from nanofibers. These nano-nonwovens showed significant enhancements in aerosol filtration performance. The reduction-oxidation reactions of the functional groups on nanofibers and the linear variation of electric double-layer capacitance with nanofiber loading were measured using cyclic voltammetry. More than 65 m2 (700 ft2) of the composite were made during the demonstration of process scalability using a Fourdrinier-type continuous pilot papermaking machine. The scalability of the process with the control over pore size distribution makes these composites very promising for filtration and other nonwoven applications.

  1. Nanofiber based triple layer hydro-philic/-phobic membrane - a solution for pore wetting in membrane distillation

    Science.gov (United States)

    Prince, J. A.; Rana, D.; Matsuura, T.; Ayyanar, N.; Shanmugasundaram, T. S.; Singh, G.

    2014-01-01

    The innovative design and synthesis of nanofiber based hydro-philic/phobic membranes with a thin hydro-phobic nanofiber layer on the top and a thin hydrophilic nanofiber layer on the bottom of the conventional casted micro-porous layer which opens up a solution for membrane pore wetting and improves the pure water flux in membrane distillation. PMID:25377488

  2. Multifunctional ZnO/Nylon 6 nanofiber mats by an electrospinning– electrospraying hybrid process for use in protective applications

    Science.gov (United States)

    ZnO/Nylon 6 nanofiber mats were prepared by an electrospinning–electrospraying hybrid process in which ZnO nanoparticles were dispersed on the surface of Nylon 6 nanofibers without becoming completely embedded. The prepared ZnO/Nylon 6 nanofiber mats were evaluated for their abilities to kill bacter...

  3. Influences of Silver-Doping on the Crystal Structure, Morphology and Photocatalytic Activity of TiO2 Nanofibers

    DEFF Research Database (Denmark)

    Barakat, Nasser A. M.; Kanjwal, Muzafar Ahmed; Al-Deyab, Salem S.

    2011-01-01

    activity of titanium oxide nanofibers has been studied. Sil-ver-doped TiO2 nanofibers having different silver contents were prepared by calcination of electrospun nanofiber mats consisting of silver nitrate, titanium isopropoxide and poly(vinyl acetate) at 600°C. The results affirmed formation of silver...

  4. Triple Antibiotic Polymer Nanofibers for Intracanal Drug Delivery: Effects on Dual Species Biofilm and Cell Function.

    Science.gov (United States)

    Pankajakshan, Divya; Albuquerque, Maria T P; Evans, Joshua D; Kamocka, Malgorzata M; Gregory, Richard L; Bottino, Marco C

    2016-10-01

    Root canal disinfection and the establishment of an intracanal microenvironment conducive to the proliferation/differentiation of stem cells play a significant role in regenerative endodontics. This study was designed to (1) investigate the antimicrobial efficacy of triple antibiotic-containing nanofibers against a dual-species biofilm and (2) evaluate the ability of dental pulp stem cells (DPSCs) to adhere to and proliferate on dentin upon nanofiber exposure. Seven-day-old dual-species biofilm established on dentin specimens was exposed for 3 days to the following: saline (control), antibiotic-free nanofibers (control), and triple antibiotic-containing nanofibers or a saturated triple antibiotic paste (TAP) solution (50 mg/mL in phosphate buffer solution). Bacterial viability was assessed using the LIVE/DEAD assay (Molecular Probes, Inc, Eugene, OR) and confocal laser scanning microscopy. For cytocompatibility studies, dentin specimens after nanofiber or TAP (1 g/mL in phosphate buffer solution) exposure were evaluated for cell adhesion and spreading by actin-phalloidin staining. DPSC proliferation was assessed on days 1, 3, and 7. Statistics were performed, and significance was set at the 5% level. Confocal laser scanning microscopy showed significant bacterial death upon antibiotic-containing nanofiber exposure, differing significantly (P antibiotic-free fibers and the control (saline). DPSCs showed enhanced adhesion/spreading on dentin specimens treated with antibiotic-containing nanofibers when compared with its TAP counterparts. The DPSC proliferation rate was similar on days 1 and 3 in antibiotic-free nanofibers, triple antibiotic-containing nanofibers, and TAP-treated dentin. Proliferation was higher (9-fold) on dentin treated with antibiotic-containing nanofibers on day 7 compared with TAP. Triple antibiotic-containing polymer nanofibers led to significant bacterial death, whereas they did not affect DPSC attachment and proliferation on dentin

  5. Carbon nanofiber growth in plasma-enhanced chemical vapor deposition

    Science.gov (United States)

    Denysenko, I.; Ostrikov, K.; Cvelbar, U.; Mozetic, M.; Azarenkov, N. A.

    2008-10-01

    A theoretical model to describe the plasma-assisted growth of carbon nanofibers (CNFs) is proposed. Using the model, the plasma-related effects on the nanofiber growth parameters, such as the growth rate due to surface and bulk diffusion, the effective carbon flux to the catalyst surface, the characteristic residence time and diffusion length of carbon atoms on the catalyst surface, and the surface coverages, have been studied. The dependence of these parameters on the catalyst surface temperature and ion and etching gas fluxes to the catalyst surface is quantified. The optimum conditions under which a low-temperature plasma environment can benefit the CNF growth are formulated. These results are in good agreement with the available experimental data on CNF growth and can be used for optimizing synthesis of related nanoassemblies in low-temperature plasma-assisted nanofabrication.

  6. Fabrication of cellulose nanofiber transparent films for IT applications

    Science.gov (United States)

    Zhai, Lindong; Song, Sangho; Kim, Jeong Woong; Li, Yaguang; Kim, Jaehwan

    2016-04-01

    One of the abundant renewable biomaterials in the world - cellulose is produced from plants forming micro-fibrils which in turn aggregate of form cellulose fibers. These fibers size can be disintegrated from micro-fibrils to nanofibers by physical and chemical methods. Cellulose nanofibers (CNF) can be a new building block of renewable smart materials. The CNF has excellent mechanical strength, dimensional stability, thermal stability and good optical properties on top of their renewable behavior. This paper reports CNF transparent films made by CNF extracted by the physical method: a high pressure physical, so called aqueous counter collision method. Natural behaviors, extraction and film formation of CNF are explained and their characteristics are illustrated, which is suit for IT applications.

  7. Polymorphism Behaviors of Electrospun Poly(vinylidene fluoride) Nanofibers

    Science.gov (United States)

    Zhong, Zhenxin; Reneker, Darrell

    2009-03-01

    Poly(vinylidene fluoride) (PVDF) and its copolymers have drawn great attention in recent years due to their attractive electrical properties such as ferro-, piezo- and pyro-electricity. Depending on its processing, PVDF can exhibit five different polymorphs. Among them, the beta phase has the highest piezo-, pyro- and ferroelectric activities. Electrospinning was used to produce thin polymer fibers. The polymorphic behavior of electrospun PVDF fibers was observed. Long cylindrical PVDF specimens with cross-sections in the range of 10 nm to 1 micron was obtained by varying the electrospinning conditions. Almost pure beta phase was obtained in electrospun PVDF nanofibers. The morphology and internal structure of single PVDF electrospun nanofibers were studied by transmission electron microscopy.

  8. Metal nanogrids, nanowires, and nanofibers for transparent electrodes

    KAUST Repository

    Hu, Liangbing

    2011-10-01

    Metals possess the highest conductivity among all room-temperature materials; however, ultrathin metal films demonstrate decent optical transparency but poor sheet conductance due to electron scattering from the surface and grain boundaries. This article discusses engineered metal nanostructures in the form of nanogrids, nanowires, or continuous nanofibers as efficient transparent and conductive electrodes. Metal nanogrids are discussed, as they represent an excellent platform for understanding the fundamental science. Progress toward low-cost, nano-ink-based printed silver nanowire electrodes, including silver nanowire synthesis, film fabrication, wire-wire junction resistance, optoelectronic properties, and stability, are also discussed. Another important factor for low-cost application is to use earth-abundant materials. Copper-based nanowires and nanofibers are discussed in this context. Examples of device integrations of these materials are also given. Such metal nanostructure-based transparent electrodes are particularly attractive for solar cell applications. © 2011 Materials Research Society.

  9. Ethylene tetrafluoroethylene nanofibers prepared by CO2 laser supersonic drawing

    Directory of Open Access Journals (Sweden)

    A. Suzuki

    2013-06-01

    Full Text Available Ethylene tetrafluoroethylene (ETFE nanofibers were prepared by carbon dioxide (CO2 laser irradiation of asspun ETFE fibers with four different melt flow rates (MFRs in a supersonic jet that was generated by blowing air into a vacuum chamber through the fiber injection orifice. The drawability and superstructure of fibers produced by CO2 laser supersonic drawing depend on the laser power, the chamber pressure, the fiber injection speed, and the MFR. Nanofibers obtained using a laser power of 20 W, a chamber pressure of 20 kPa, and an MFR of 308 g•10 min–1 had an average diameter of 0.303 µm and a degree of crystallinity of 54%.

  10. Microstructure and property of regenepercentaged silk fibroin/chitosan nanofibers

    Directory of Open Access Journals (Sweden)

    Zhao Lei

    2016-01-01

    Full Text Available Composite silk fibroin/chitosan nanofiber membrane was fabricated by bubbfil electrospinning. The influence of chitosan content on composite membrane's microstructure, mechanical property, and the percentage of water-dissolved were studied experimentally. The result indicated that the crystallinity of electrospun membrane was enhanced by increasing chitosan concentration. It is noteworthy that the percentage of water-dissolved was the minimum when the weight ratio of silk fibroin/chitosan was 70:30. After the composite membrane treated by the methanol, the percentage of water-dissolved of the nanofiber membrane decreased significantly. The strength and elongation at break of composite membrane increased gradually with the increased content of chitosan. Additionally, the electrospun silk fibroin/chitosan membrane showed excellent antibacterial property.

  11. Chitosan nanofibers fabricated by combined ultrasonic atomization and freeze casting.

    Science.gov (United States)

    Wang, Yihan; Wakisaka, Minato

    2015-05-20

    Aligned chitosan nanofibers exhibiting diameters smaller than 100 nm were easily prepared by combining ultrasonic atomization with freeze casting. A major advantage of this approach is the use of distilled water as main solvent. Scanning electron microscopy demonstrated that fiber diameter and morphology mainly depended on the atomizing tools, freezing temperature, and chitosan solution viscosity. Minimum diameter and uniform orientation were achieved using an electric flosser as an atomizing tool, liquid nitrogen as a coolant, 0.4 wt% aqueous chitosan solution (molecular weight = 22 kDa), and a small amount of lactic acid as solvent at 0 °C. The resulting chitosan nanofibers may find application in biomedical and food engineering. Moreover, this new technology may be applicable to other natural and synthetic water-soluble polymers.

  12. Laser-induced charge separation in organic nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Behn, Dino; Kjelstrup-Hansen, Jakob

    Organic semiconductors have unique properties that can be tailored via synthetic chemistry for specific applications, which combined with their low price and straight-forward processing over large areas make them interesting materials for future devices. Certain oligomers can self-assemble into c......Organic semiconductors have unique properties that can be tailored via synthetic chemistry for specific applications, which combined with their low price and straight-forward processing over large areas make them interesting materials for future devices. Certain oligomers can self...... with the transport characteristics that show these nanofibers form p-type FET devices. Our current efforts are focused on nanofiber-based transistor devices using scanning photocurrent imaging (SPI) to study the local electronic band structure along the channel and at the contacts....

  13. Coherence properties of nanofiber-trapped cesium atoms.

    Science.gov (United States)

    Reitz, D; Sayrin, C; Mitsch, R; Schneeweiss, P; Rauschenbeutel, A

    2013-06-14

    We experimentally study the ground state coherence properties of cesium atoms in a nanofiber-based two-color dipole trap, localized ∼ 200 nm away from the fiber surface. Using microwave radiation to coherently drive the clock transition, we record Ramsey fringes as well as spin echo signals and infer a reversible dephasing time of T(2)(*) = 0.6 ms and an irreversible dephasing time of T(2)(') = 3.7 ms. By modeling the signals, we find that, for our experimental parameters, T(2)(*) and T(2)(') are limited by the finite initial temperature of the atomic ensemble and the heating rate, respectively. Our results represent a fundamental step towards establishing nanofiber-based traps for cold atoms as a building block in an optical fiber quantum network.

  14. Coherence properties of nanofiber-trapped cesium atoms

    CERN Document Server

    Reitz, D; Mitsch, R; Schneeweiss, P; Rauschenbeutel, A

    2013-01-01

    We experimentally study the ground state coherence properties of cesium atoms in a nanofiber-based two-color dipole trap, localized 200 nm away from the fiber surface. Using microwave radiation to coherently drive the clock transition, we record Ramsey fringes as well as spin echo signals and infer a reversible dephasing time $T_2^\\ast=0.6$ ms and an irreversible dephasing time $T_2^\\prime=3.7$ ms. By theoretically modelling the signals, we find that, for our experimental parameters, $T_2^\\ast$ and $T_2^\\prime$ are limited by the finite initial temperature of the atomic ensemble and the heating rate, respectively. Our results represent a fundamental step towards establishing nanofiber-based traps for cold atoms as a building block in an optical fiber quantum network.

  15. Application of direct tracking method for measuring electrospun nanofiber diameter

    Directory of Open Access Journals (Sweden)

    M. Ziabari

    2009-03-01

    Full Text Available In this paper, direct tracking method as an image analysis based technique for measuring electrospun nanofiber diameter has been presented and compared with distance transform method. Samples with known characteristics generated using a simulation scheme known as µ-randomness were employed to evaluate the accuracy of the method. Electrospun webs of polyvinyl alcohol (PVA were also used to verify the applicability of the method on real samples. Since direct tracking as well as distance transform require binary input images, micrographs of the electrospun webs obtained from Scanning Electron Microscopy (SEM were first converted to black and white using local thresholding. Direct tracking resulted in more accurate estimations of fiber diameter for simulated images as well as electrospun webs suggesting the usefulness of the method for electrospun nanofiber diameter measurement.

  16. Vertically Aligned Carbon Nanofiber based Biosensor Platform for Glucose Sensor

    Energy Technology Data Exchange (ETDEWEB)

    Al Mamun, Khandaker A.; Tulip, Fahmida S.; MacArthur, Kimberly; McFarlane, Nicole; Islam, Syed K.; Hensley, Dale

    2014-03-01

    Vertically aligned carbon nanofibers (VACNFs) have recently become an important tool for biosensor design. Carbon nanofibers (CNF) have excellent conductive and structural properties with many irregularities and defect sites in addition to exposed carboxyl groups throughout their surfaces. These properties allow a better immobilization matrix compared to carbon nanotubes and offer better resolution when compared with the FET-based biosensors. VACNFs can be deterministically grown on silicon substrates allowing optimization of the structures for various biosensor applications. Two VACNF electrode architectures have been employed in this study and a comparison of their performances has been made in terms of sensitivity, sensing limitations, dynamic range, and response time. The usage of VACNF platform as a glucose sensor has been verified in this study by selecting an optimum architecture based on the VACNF forest density. Read More: http://www.worldscientific.com/doi/abs/10.1142/S0129156414500062

  17. Tapered nanofiber trapping of high-refractive-index nanoparticles

    CERN Document Server

    Swaim, Jon D; Bowen, Warwick P

    2013-01-01

    A nanofiber-based optical tweezer is demonstrated. Trapping is achieved by combining attractive near-field optical gradient forces with repulsive electrostatic forces. Silica-coated Fe$_2$O$_3$ nanospheres of 300 diameter are trapped as close as 50 nm away from the surface with 810 $\\mu$W of optical power, with a maximum trap stiffness of 2.7 pN $\\mu$m$^{-1}$. Electrostatic trapping forces up to 0.5 pN are achieved, a factor of 50 larger than those achievable for the same optical power in conventional optical tweezers. Efficient collection of the optical field directly into the nanofiber enables ultra-sensitive tracking of nanoparticle motion and extraction of its characteristic Brownian motion spectrum, with a minimum position sensitivity of 3.4 $\\AA / \\sqrt{\\text{Hz}}$.

  18. Biological adhesive based on carboxymethyl chitin derivatives and chitin nanofibers.

    Science.gov (United States)

    Azuma, Kazuo; Nishihara, Masahiro; Shimizu, Haruki; Itoh, Yoshiki; Takashima, Osamu; Osaki, Tomohiro; Itoh, Norihiko; Imagawa, Tomohiro; Murahata, Yusuke; Tsuka, Takeshi; Izawa, Hironori; Ifuku, Shinsuke; Minami, Saburo; Saimoto, Hiroyuki; Okamoto, Yoshiharu; Morimoto, Minoru

    2015-02-01

    Novel biological adhesives made from chitin derivatives were prepared and evaluated for their adhesive properties and biocompatibility. Chitin derivatives with acrylic groups, such as 2-hydroxy-3-methacryloyloxypropylated carboxymethyl chitin (HMA-CM-chitin), were synthesized and cured by the addition of an aqueous hydrogen peroxide solution as a radical initiator. The adhesive strength of HMA-CM-chitin increased when it was blended with chitin nanofibers (CNFs) or surface-deacetylated chitin nanofibers (S-DACNFs). HMA-CM-chitin/CNFs or HMA-CM-chitin/S-DACNFs have almost equal adhesive strength compared to that of a commercial cyanoacrylate adhesive. Moreover, quick adhesion and induction of inflammatory cells migration were observed in HMA-CM-chitin/CNF and HMA-CM-chitin/S-DACNF. These findings indicate that the composites prepared in this study are promising materials as new biological adhesives.

  19. Carbon nanofibers grown on metallic filters as novel catalytic materials

    OpenAIRE

    Tribolet, Pascal; Kiwi-Minsker, Lioubov

    2005-01-01

    Carbon nanofibers (CNF) were synthesized on sintered metal fibers (SMF) filters of nickel and Ni-containing alloys (Inconel, stainless steel (SS)) by thermal chemical vapor deposition of ethane in the presence of hydrogen at not, vert, similar660 °C. The CNFs were formed directly over the SMF filters without deposition of metal particles. The catalytic active sites leading to the CNF formation were attained by oxidation–reduction of the SMF filter. The CNFs present platelet morphology as dete...

  20. Cellulose nanowhiskers and nanofibers from biomass for composite applications

    Science.gov (United States)

    Wang, Tao

    2011-12-01

    Biological nanocomposites such as plant cell wall exhibit high mechanical properties at a light weight. The secret of the rigidity and strength of the cell wall lies in its main structural component -- cellulose. Native cellulose exists as highly-ordered microfibrils, which are just a few nanometers wide and have been found to be stiffer than many synthetic fibers. In the quest for sustainable development around the world, using cellulose microfibrils from plant materials as renewable alternatives to conventional reinforcement materials such as glass fibers and carbon fibers is generating particular interest. In this research, by mechanical disintegration and by controlled chemical hydrolysis, both cellulose nanofibers and nanowhiskers were extracted from the cell wall of an agricultural waste, wheat straw. The reinforcement performances of the two nanofillers were then studied and compared using the water-soluble polyvinyl alcohol (PVOH) as a matrix material. It was found that while both of these nanofillers could impart higher stiffness to the polymer, the nanofibers from biomass were more effective in composite reinforcement than the cellulose crystals thanks to their large aspect ratio and their ability to form interconnected network structures through hydrogen bonding. One of the biggest challenges in the development of cellulose nanocomposites is achieving good dispersion. Because of the high density of hydroxyl groups on the surface of cellulose, it remains a difficult task to disperse cellulose nanofibers in many commonly used polymer matrices. The present work addresses this issue by developing a water-based route taking advantage of polymer colloidal suspensions. Combining cellulose nanofibers with one of the most important biopolymers, poly(lactic acid) (PLA), we have prepared nanocomposites with excellent fiber dispersion and improved modulus and strength. The bio-based nanocomposites have a great potential to serve as light-weight structural materials

  1. Tuneable nanoparticle-nanofiber composite substrate for improved cellular adhesion.

    Science.gov (United States)

    Nicolini, Ariana M; Toth, Tyler D; Yoon, Jeong-Yeol

    2016-09-01

    This work presents a novel technique using a reverse potential electrospinning mode for fabricating nanoparticle-embedded composites that can be tailored to represent various fiber diameters, surface morphologies, and functional groups necessary for improved cellular adhesion. Polycaprolactone (PCL) nanofibers were electrospun in both traditional positive (PP) and reverse potential (RP) electrical fields. The fibers were incorporated with 300nm polystyrene (PS) fluorescent particles, which contained carboxyl, amine groups, and surfactants. In the unconventional RP, the charged colloidal particles and surfactants were shown to have an exaggerated effect on Taylor cone morphology and fiber diameter caused by the changes in charge density and surface tension of the bulk solution. The RP mode was shown to lead to a decrease in fiber diameter from 1200±100nm (diameter±SE) for the nanofibers made with PCL alone to 440±80nm with the incorporation of colloidal particles, compared to the PP mode ranging from 530±90nm to 350±50nm, respectively. The nanoparticle-nanofiber composite substrates were cultured with human umbilical vein endothelial cells (HUVECs) and evaluated for cellular viability and adhesion for up to 5 days. Adhesion to the nanofibrous substrates was improved by 180±10% with the addition of carboxylated particles and by 480±60% with the functionalization of an RGD ligand compared to the PCL nanofibers. The novel approach of electrospinning in the RP mode with the addition of colloids in order to alter charge density and surface tension could be utilized towards many applications, one being implantable biomaterials and tissue engineered scaffolds as demonstrated in this work.

  2. Characterization of Chitosan Nanofiber Sheets for Antifungal Application

    OpenAIRE

    Mayumi Egusa; Ryo Iwamoto; Hironori Izawa; Minoru Morimoto; Hiroyuki Saimoto; Hironori Kaminaka; Shinsuke Ifuku

    2015-01-01

    Chitosan produced by the deacetylation of chitin is a cationic polymer with antimicrobial properties. In this study, we demonstrate the improvement of chitosan properties by nanofibrillation. Nanofiber sheets were prepared from nanofibrillated chitosan under neutral conditions. The Young’s modulus and tensile strength of the chitosan NF sheets were higher than those of the chitosan sheets prepared from dissolving chitosan in acetic acid. The chitosan NF sheets showed strong mycelial growth in...

  3. Nanofiber Nerve Guide for Peripheral Nerve Repair and Regeneration

    Science.gov (United States)

    2016-04-01

    migration distance divided by vertical distance travelled. Figure 3. Gradient generation method (A–F) and characterization and concentrations of the...relative to one another (Table 1, aligned fiber density column ). The nanofiber size was maintained at 760 nm, within the intermediate diameter range of...expenditures Significant changes in use or care of human subjects, vertebrate animals, biohazards, and/or select agents Significant changes in use or

  4. Cellulose nanofibers use in coated paper

    Science.gov (United States)

    Richmond, Finley

    Cellulose Nanofibers (CNF) are materials that can be obtained by the mechanical breakdown of natural fibers. CNF have the potential to be produced at low cost in a paper mill and may provide novel properties to paper, paper coatings, paints, or other products. However, suspensions have a complex rheology even at low solid contents. To be able to coat, pump, or mix CNF at moderate solids, it is critical to understand the rheology of these suspensions and how they flow in process equipment; current papers only report the rheology up to 6% solids. Few publications are available that describe the coating of CNF onto paper or the use of CNF as an additive into a paper coating. The rheology of CNF suspensions and coatings that contain CNF were characterized with parallel-disk geometry in a controlled stress rheometer. The steady shear viscosity, the complex viscosity, the storage modulus, and the yield stress were determined for the range of solids or concentrations (2.5-10.5%). CNF were coated onto paper with a laboratory rod coater, a size press and a high speed cylindrical laboratory coater (CLC). For each case, the coat weights were measures and the properties of the papers were characterized. CNF water base suspension was found to be a shear thinning with a power law index of around 0.1. Oscillatory tests showed a linear viscoelastic region at low strains and significant storage and loss moduli even at low solids. The Cox Merz rule does not hold for CNF suspensions or coating formulations that contain CNF with complex viscosities that are about 100 times larger than the steady shear viscosities. Paper coating formulations that contain CNF were found to have viscosities and storage and loss moduli that are over ten times larger than coatings that contain starch at similar solids. CNF suspensions were coated on papers with low amount transferred on paper either at high solids or high nip loadings. The amount transferred appears to be controlled by an interaction of

  5. New applications for cellulose nanofibers: Rheological challenges

    Science.gov (United States)

    Nazari-Nasrabad, Behzad

    Cellulose nanofibers (CNF) are an exciting new renewable material produced from wood fibers. Even at low solids content, CNF-water suspensions have a complex rheology that includes extreme shear-thinning as well as viscoelastic properties and a yield stress. In the rheology of CNF suspensions, the measurement method may influence the results due to wall-slippage, but it is unclear how the behavior near walls influences the measurement method and what process equipment can manipulate this material. Parallel-plate and vane geometries were utilized to compare yielding and flow of CNF suspensions obtained by steady-state shear and oscillatory rheological measurements. Four different methods were compared as techniques to obtain a yield stress. The results are compared to pressure driven flow in a tube. Cone and plate geometries were found to lead to sample ejection at low shear rates: floc-floc interactions can explain this ejection. The suspensions violated the Cox-Merz rule in a significant manner as a sign of containing weak gel structures and the formation of a water-rich layer near the solid boundaries. For suspensions lower than 3% solids, the yield stress measured with different procedures were within 20% of each other, but for high solids suspensions, differences among the methods could be as large as 100%; the water-rich layer formation likely is the cause of these results. Oscillatory methods are suggested as a technique to obtain yield stress values. The pressure driven flow results were consistent with the power-law line fitted to the parallel-plate geometry data from steady shear. The capability of the extrusion process was investigated for pumping CNF suspensions through different dies. The extrusion process resulted in acceptable pumping rates which was in good agreement with the mathematical model. However, attributable to the extreme shear-thinning behavior of CNF, the pressure counter-flow dominates the drag flow along the screw channel and does not

  6. Antibiotic-functionalized graphite nanofibers and applications of cyanoglycosides in graphite nanofiber functionalization

    Science.gov (United States)

    Rotella, Madeline

    The synthesis of functionalized graphite nanofibers (GNFs) with antibiotics and cyclic boronate esters is described. By first oxidizing the GNFs, surface oxides are introduced to the fiber that serve as sites for the attachment of larger molecules such as aminoglycoside antibiotics and carbohydrates. On the one hand, the aminoglycoside antibiotic tobramycin can be attached to the surface of a GNF via the carboxyl groups. This tobramycin-labeled GNF was prepared, characterized for its antibiotic content by X-ray photoelectron spectroscopy (XPS), and studied for its retention of antibacterial activity against the common bacterium Pseudomonas aeruginosa. On the other hand, Boc-protected amine precursors which may serve as key intermediates in the preparation of a reversible GNF label were prepared starting from two similar carbohydrate substrates, tri-O-acetyl-D-galactal and tri-O-acetyl-D-glucal. A nitrile group was added to the C1 of the substrate via Ferrier addition with trimethylsilyl cyanide followed by reduction of the C2-C3 double bond and finally a deacylation to yield stereoisomeric diol nitriles. The diol nitriles in both series were converted to analogous protected Boc amines. Products were characterized by 1H and 13C NMR spectroscopy, mass spectrometry and X-ray crystallography.

  7. Carbon Nanofibers (CNFs) Surface Modification to Fabricate Carbon Nanofibers_Nanopaper Integrated Polymer Composite Material.

    Science.gov (United States)

    Jiang, Jianjun; Zhao, Ziwei; Deng, Chao; Liu, Fa; Li, Dejia; Fang, Liangchao; Zhang, Dan; Castro Jose M; Chen, Feng; Lee, L James

    2016-06-01

    Carbon Nanofibers (CNFs) have shown great potential to improve the physical and mechanical properties of conventional Fiber Reinforced Polymer Composites (FRPCs) surface. Excellent dispersion CNFs into water or polymer matrix was very crucial to get good quality CNFs enhanced FRPCs. Because of the hydrophobic properties of CNFs, we apply the reversible switching principles to transfer the hydrophobic surface into hydrophilic surface by growing polyaniline nanograss on the surface of CNFs which was carried out in hydrochloric acid condition. Incorporating CNFs into FRPCs as a surface layer named CNFs Nanopaper to increase the erosion resistance and electrical conductivity in this research which was very important in the wind energy field. In order to get high quality dispersed CNFs suspension, a sonication unit was used to detangle and uniform disperse the functionalized CNFs. A filter with vacuum pressure used to filter the suspension of CNFs onto Carbon veil to make CNFs Nanopaper. Vacuum Aided Resin Transfer Modeling (VARTM) process was used to fabricate Nano-enhanced FRPCs samples. In order to characterize the mechanical properties, three point bending experiment was measured. The flexural strength capacity and deformation resistance and behavior were compared and analyzed. In this paper, we discussed the methods used and provided experimental parameter and experimental results.

  8. Giant Thermal Rectification from Polyethylene Nanofiber Thermal Diodes.

    Science.gov (United States)

    Zhang, Teng; Luo, Tengfei

    2015-09-01

    The realization of phononic computing is held hostage by the lack of high-performance thermal devices. Here, it is shown through theoretical analysis and molecular dynamics simulations that unprecedented thermal rectification factors (as large as 1.20) can be achieved utilizing the phase-dependent thermal conductivity of polyethylene nanofibers. More importantly, such high thermal rectifications only need very small temperature differences (rectification factors of the polymer nanofiber diodes range from 12 to 25-much larger than those of other thermal diodes (<8). The polymer nanofiber thermal diode consists of a crystalline portion whose thermal conductivity is highly phase-sensitive and a cross-linked portion which has a stable phase. Nanoscale size effect can be utilized to tune the phase transition temperature of the crystalline portion, enabling thermal diodes capable of operating at different temperatures. This work will be instrumental to the design of high performance, inexpensive, and easily processible thermal devices, based on which thermal circuits can be built to ultimately enable phononic computing.

  9. Proliferation of Genetically Modified Human Cells on Electrospun Nanofiber Scaffolds

    Directory of Open Access Journals (Sweden)

    Mandula Borjigin

    2012-01-01

    Full Text Available Gene editing is a process by which single base mutations can be corrected, in the context of the chromosome, using single-stranded oligodeoxynucleotides (ssODNs. The survival and proliferation of the corrected cells bearing modified genes, however, are impeded by a phenomenon known as reduced proliferation phenotype (RPP; this is a barrier to practical implementation. To overcome the RPP problem, we utilized nanofiber scaffolds as templates on which modified cells were allowed to recover, grow, and expand after gene editing. Here, we present evidence that some HCT116-19, bearing an integrated, mutated enhanced green fluorescent protein (eGFP gene and corrected by gene editing, proliferate on polylysine or fibronectin-coated polycaprolactone (PCL nanofiber scaffolds. In contrast, no cells from the same reaction protocol plated on both regular dish surfaces and polylysine (or fibronectin-coated dish surfaces proliferate. Therefore, growing genetically modified (edited cells on electrospun nanofiber scaffolds promotes the reversal of the RPP and increases the potential of gene editing as an ex vivo gene therapy application.

  10. Conducting polymer nanofibers for high sensitivity detection of chemical analytes.

    Science.gov (United States)

    Kumar, Abhishek; Leshchiner, Ignaty; Nagarajan, Subhalakshmi; Nagarajan, Ramaswamy; Kumar, Jayant

    2008-03-01

    Possessing large surface area materials is vital for high sensitivity detection of analyte. We report a novel, inexpensive and simple technique to make high surface area sensing interfaces using electrospinning. Conducting polymers (CP) nanotubes were made by electrospinning a solution of a catalyst (ferric tosylate) along with poly (lactic acid), which is an environment friendly biodegradable polymer. Further vapor deposition polymerization of the monomer ethylenedioxy thiophene (EDOT) on the nanofiber surface yielded poly (EDOT) covered fibers. X-ray photo electron spectroscopy (XPS) study reveals the presence of PEDOT predominantly on the surface of nanofibers. Conducting nanotubes had been received by dissolving the polymer in the fiber core. By a similar technique we had covalently incorporated fluorescent dyes on the nanofiber surface. The materials obtained show promise as efficient sensing elements. UV-Vis characterization confirms the formation of PEDOT nanotubes and incorporation of chromophores on the fiber surface. The morphological characterization was carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

  11. Improved fullerene nanofiber electrodes used in direct methanol fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Q [Nano Craft Technologies Co., Ltd., Tsukuba (Japan); Zhang, Y [Nationals Institute of Advanced Industrial Science and Technology, Tsukuba (Japan); Miyazawa, K; Kato, R; Hotta, K; Wakahara, T [National Institute for Materials Science, Tsukuba (Japan)], E-mail: yi.zhang@aist.go.jp, E-mail: q.wang@aist.go.jp

    2009-04-01

    Platinum supported on fullerene nanofibers as possible electrodes for direct methanol fuel cells (DMFC) were studied. Fullerene nanofiber with 20 wt% Pt loading was mixed with 5 wt% Nafion solution. The mixture paste was coated on Nafion 117 membrane and sandwiched with silicon plates. To increase the surface reaction area of catalyst, nanoimprint was used to fabricate micro-patterns in the Nafion proton exchange membrane. Nanoimprint pattern consisted of dots of 500 nm-in-diameter, 140 nm-in-depth and 1 {mu}m-in-spacing. The nanoimprint of the treated proton exchange membrane (PEM) was carried out in a desktop thermal nanoimprint system (NI273, Nano Craft Tech. Corp., Japan) at the optimized conditions of 130 {sup 0}C and pressure of 3 MPa for 6 min. Then the Pt-coated PEM was sandwiched with micro-channelled silicon plates to form a micro-DMFC. With passively feeding of 1 M methanol solution and air at room temperature, the as-prepared cell had the open circuit voltage of 0.34 V and the maximum power density of 0.30 mW/cm{sup 2}. Compared with a fresh cell, the results shows that nanofibers used in nanoimprinted PEM have an improvement on the performance of micro fuel cells.

  12. Toward an understanding of the formation of conducting polymer nanofibers.

    Science.gov (United States)

    Tran, Henry D; Wang, Yue; D'Arcy, Julio M; Kaner, Richard B

    2008-09-23

    Introducing small amounts of additives into polymerization reactions to produce conducting polymers can have a profound impact on the resulting polymer morphology. When an oligomer such as aniline dimer is added to the polymerization of aniline, the nanofibers produced are longer and less entangled than those typically observed. The addition of aniline dimer can even induce nanofiber formation under synthetic conditions that generally do not favor a nanofibrillar morphology. This finding can be extended to both the synthesis of polythiophene and polypyrrole nanofibers. The traditional oxidative polymerization of thiophene or pyrrole only produces agglomerated particles. However, when minute amounts of thiophene or pyrrole oligomers are added to the reaction, the resulting polymers possess a nanofibrillar morphology. These results reveal important insights into a semirigid rod nucleation phenomenon that has hitherto been little explored. When polyaniline nucleates homogeneously, surface energy requirements necessitate the formation of ordered nuclei which leads to the directional polymerization of aniline. This ultimately leads to the one-dimensional nanofibrillar morphology observed in the final product. The synthetic procedures developed here are simple, scalable, and do not require any templates or other additives that are not inherent to the polymer.

  13. Performance Enhancement of Dental Composites Using Electrospun Nanofibers

    Directory of Open Access Journals (Sweden)

    H. Dodiuk-Kenig

    2008-01-01

    Full Text Available The objective of the present study is to investigate the effect of electrospun nanofiber reinforcement on the properties of commercially available, hyperbranched polymer modified (Hybrane, 0.3 wt.% DSM dental formulations. The emergence of functionalized nanoscale reinforcements having large surface area (hundreds of square meters/gram has enabled the design of novel nanocomposites with new and complex structures leading to enhanced mechanical and physical properties. Electrospun nanofibers from a range of polymer chemistries (PVOH, PLLA, Nylon 6 have been investigated as a reinforcing phase at levels between 0.01 and 0.3 wt.%, with and without a silane coupling agent surface treatment. The experimental results indicate that 0.05 wt.% reinforcement with 250 nm diameter PVOH nanofibers leads to a 30% improvement in compressive strength, coupled with a shrinkage reduction of about 50%. Electrospun fiber reinforcement by other chemistries or at other diameters showed either no property improvement or led to property loss.

  14. Dispersions of Aramid Nanofibers: A New Nanoscale Building Block

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ming; Cao, Keqin; Sui, Lang; Qi, Ying; Zhu, Jian; Waas, Anthony; Arruda, Ellen; Kieffer, John; Thouless, M. D.; Kotov, Nicholas A.

    2011-09-27

    Stable dispersions of nanofibers are virtually unknown for synthetic polymers. They can complement analogous dispersions of inorganic components, such as nanoparticles, nanowires, nanosheets, etc. as a fundamental component of a toolset for design of nanostructures and metamaterials via numerous solvent-based processing methods. As such, strong flexible polymeric nanofibers are very desirable for the effective utilization within composites of nanoscale inorganic components such as nanowires, carbon nanotubes, graphene, and others. Here stable dispersions of uniform high-aspect-ratio aramid nanofibers (ANFs) with diameters between 3 and 30 nm and up to 10 μm in length were successfully obtained. Unlike the traditional approaches based on polymerization of monomers, they are made by controlled dissolution of standard macroscale form of the aramid polymer, that is, well-known Kevlar threads, and revealed distinct morphological features similar to carbon nanotubes. ANFs are successfully processed into films using layer-by-layer (LBL) assembly as one of the potential methods of preparation of composites from ANFs. The resultant films are transparent and highly temperature resilient. They also display enhanced mechanical characteristics making ANF films highly desirable as protective coatings, ultrastrong membranes, as well as building blocks of other high performance materials in place of or in combination with carbon nanotubes.

  15. Electrospun Metal Nanofiber Webs as High-Performance Transparent Electrode

    KAUST Repository

    Wu, Hui

    2010-10-13

    Transparent electrodes, indespensible in displays and solar cells, are currently dominated by indium tin oxide (ITO) films although the high price of indium, brittleness of films, and high vacuum deposition are limiting their applications. Recently, solution-processed networks of nanostructures such as carbon nanotubes (CNTs), graphene, and silver nanowires have attracted great attention as replacements. A low junction resistance between nanostructures is important for decreasing the sheet resistance. However, the junction resistances between CNTs and boundry resistances between graphene nanostructures are too high. The aspect ratios of silver nanowires are limited to ∼100, and silver is relatively expensive. Here, we show high-performance transparent electrodes with copper nanofiber networks by a low-cost and scalable electrospinning process. Copper nanofibers have ultrahigh aspect ratios of up to 100000 and fused crossing points with ultralow junction resistances, which result in high transmitance at low sheet resistance, e.g., 90% at 50 Ω/sq. The copper nanofiber networks also show great flexibility and stretchabilty. Organic solar cells using copper nanowire networks as transparent electrodes have a power efficiency of 3.0%, comparable to devices made with ITO electrodes. © 2010 American Chemical Society.

  16. Electrospun PLLA nanofiber scaffolds for bladder smooth muscle reconstruction.

    Science.gov (United States)

    Derakhshan, Mohammad Ali; Pourmand, Gholamreza; Ai, Jafar; Ghanbari, Hossein; Dinarvand, Rassoul; Naji, Mohammad; Faridi-Majidi, Reza

    2016-07-01

    Urinary bladder may encounter several pathologic conditions that could lead to loss of its function. Tissue engineering using electrospun PLLA scaffolds is a promising approach to reconstructing or replacing the problematic bladder. PLLA nanofibrous scaffolds were prepared utilizing single-nozzle electrospinning. The morphology and distribution of fiber diameters were investigated by scanning electron microscopy (SEM). Human bladder smooth muscle cells (hBSMCs) were isolated from biopsies and characterized by immunocytochemistry (ICC). Then, the cells were seeded on the PLLA nanofibers and Alamar Blue assay proved the biocompatibility of prepared scaffolds. Cell attachment on the nanofibers and also cell morphology over fibrous scaffolds were observed by SEM. The results indicated that electrospun PLLA scaffold provides proper conditions for hBSMCs to interact and attach efficiently to the fibers. Alamar Blue assay showed the compatibility of the obtained electrospun scaffolds with hBSMCs. Also, it was observed that the cells could achieve highly elongated morphology and their native aligned direction besides each other on the random electrospun scaffolds and in the absence of supporting aligned nanofibers. Electrospun PLLA scaffold efficiently supports the hBSMCs growth and alignment and also has proper cell compatibility. This scaffold would be promising in urinary bladder tissue engineering.

  17. Light-activated polymethylmethacrylate nanofibers with antibacterial activity

    Energy Technology Data Exchange (ETDEWEB)

    Elashnikov, Roman [Department of Solid State Engineering, University of Chemistry and Technology, 16628 Prague (Czech Republic); Lyutakov, Oleksiy, E-mail: lyutakoo@vscht.cz [Department of Solid State Engineering, University of Chemistry and Technology, 16628 Prague (Czech Republic); Ulbrich, Pavel [Department of Biochemistry and Microbiology, University of Chemistry and Technology, 16628 Prague (Czech Republic); Svorcik, Vaclav [Department of Solid State Engineering, University of Chemistry and Technology, 16628 Prague (Czech Republic)

    2016-07-01

    The creation of an antibacterial material with triggerable properties enables us to avoid the overuse or misuse of antibacterial substances and, thus, prevent the emergence of resistant bacterial strains. As a potential light-activated antibacterial material, polymethylmethacrylate (PMMA) nanofibers doped with silver nanoparticles (AgNPs) and meso-tetraphenylporphyrin (TPP) were prepared by electrospinning. TPP was chosen as an effectively reactive oxygen species (ROS) producer. Antibacterial tests on Staphylococcus epidermidis (S. epidermidis) and Enterococcus faecalis (E. faecalis) showed the excellent light-triggerable antibacterial activity of the doped materials. Upon light irradiation at the wavelength corresponding to the TPP absorption peak (405 nm), antibacterial activity dramatically increased, mostly due to the release of AgNPs from the polymer matrix. Furthermore, under prolonged light irradiation, the AgNPs/TPP/PMMA nanofibers, displayed enhanced longevity and photothermal stability. Thus, our results suggest that the proposed material is a promising option for the photodynamic inactivation of bacteria. - Highlights: • The novelty of proposed work can be summared as follow: • Silver nanoparticles/meso-tetraphenylporphyrin embedded polymethylmethacrylate nanofibers were obtained for the first time. • Light triggering of PMMA fibers leads to sufficient release of AgNPs or their agglomeration, depending on the light source. • Release of AgNPs leads to appearance of pronounced antimicrobial activity, which can be switched on/off by the illumination.

  18. Tissue Regeneration through Self-Assembled Peptide Amphiphile Nanofibers

    Directory of Open Access Journals (Sweden)

    Hossein Hosseinkhani

    2006-01-01

    Full Text Available Introduction: In the present study, we hypothesized that a novelapproach to promote vascularization would be to create injectablethree dimensional (3-D scaffolds within growth factor that enhancethe sustained release of growth factor and induce the angiogenesis.Material and Methods: We demonstrate that a 3-D scaffold can beformed by mixing of peptide-amphiphile (PA aqueous solution withhepatocyte growth factor (HGF solution. PA was synthesized bystandard solid phase chemistry that ends with the alkylation of theNH2 terminus of the peptide. The sequence of arginine-glycineasparticacid (RGD was included in peptide design as well. A 3-Dnetwork of nanofibers was formed by mixing HGF suspensions withdilute aqueous solution of PA.Results: Scanning electron microscopy (SEM examination revealedthe formation of fibrous assemblies with an extremely high aspectratio and high surface areas with mean diameter of less than 200 nm.In vitro HGF release profile of 3-D nanofibers was investigated whileangiogenesis induced by the released HGF was being assessed. Invivo potential ability of PA nanofibers to induce angiogenesis wasassessed through subcutaneous injection of PA solution, HGFsolution, and PA in combination with HGF solutions. Injection of PAwith HGF induced significant angiogenesis around the injected site,in marked contrast to HGF injection alone and PA injection alone.Conclusion: The combination of HGF-induced angiogenesis is apromising procedure to improve tissue regeneration.

  19. Fabrication of zinc titanate nanofibers by electrospinning technique

    Energy Technology Data Exchange (ETDEWEB)

    Cai Zongying, E-mail: czy1106@sina.co [Institute of Advanced Materials, Mechanical Engineering College, Shijiazhuang, Hebei 050003 (China); Li Junshou; Wang Yigang [Institute of Advanced Materials, Mechanical Engineering College, Shijiazhuang, Hebei 050003 (China)

    2010-01-07

    The zinc titanate composite nanofibers were prepared using electrospinning method combining sol-gel process followed by calcining the precursor PVP/Zn(CH{sub 3}COO){sub 2}-Ti(OC{sub 4}H{sub 9}){sub 4} fibers under air in the temperature range of 400-700 {sup o}C. The nanofibers were characterized by thermal field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), thermal gravimetric and differential thermal analysis (TG-DTA). FE-SEM micrographs indicated that the surfaces of the nanofibers are uniform and smooth and the diameter of the fiber decreasing as the calcination temperature increasing. It is also found that ZnO-TiO{sub 2} ceramic fibers including ZnTiO{sub 3}, Zn{sub 2}TiO{sub 4} and rutile phase were synthesized by calcining the precursor PVP/Zn(CH{sub 3}COO){sub 2}-Ti(OC{sub 4}H{sub 9}){sub 4} composite fibers at 700 {sup o}C.

  20. Helix Electrohydrodynamic Printing of Highly Aligned Serpentine Micro/Nanofibers

    Directory of Open Access Journals (Sweden)

    Yongqing Duan

    2017-09-01

    Full Text Available Micro/nano serpentine structures have widespread applications in flexible/stretchable electronics; however, challenges still exist for low-cost, high-efficiency and controllable manufacturing. Helix electrohydrodynamic printing (HE-printing has been proposed here to realize controllable direct-writing of large area, highly aligned serpentine micro/nanofibers by introducing the rope coiling effect into printing process. By manipulating the flying trajectory and solidification degree of the micro/nano jet, the solidified micro/nanofiber flying in a stabilized helical manner and versatile serpentine structures deposited on a moving collector have been achieved. Systematic experiments and theoretical analysis were conducted to study the transformation behavior and the size changing rules for various deposited microstructures, and highly aligned serpentine microfibers were directly written by controlling the applied voltage, nozzle-to-collector distance and collector velocity. Furthermore, a hyper-stretchable piezoelectric device that can detect stretching, bending and pressure has been successfully fabricated using the printed serpentine micro/nanofibers, demonstrating the potential of HE-printing in stretchable electronics manufacturing.