WorldWideScience

Sample records for bio geo-environmental reference

  1. Thallium pollution in China: A geo-environmental perspective.

    Science.gov (United States)

    Xiao, Tangfu; Yang, Fei; Li, Shehong; Zheng, Baoshan; Ning, Zengping

    2012-04-01

    It is well known that thallium (Tl) is a non-essential and toxic metal to human health, but less is known about the geo-environmentally-induced Tl pollution and its associated health impacts. High concentrations of Tl that are primarily associated with the epithermal metallogenesis of sulfide minerals have the potential of producing Tl pollution in the environment, which has been recognized as an emerging pollutant in China. This paper aims to review the research progress in China on Tl pollution in terms of the source, mobility, transportation pathway, and health exposure of Tl and to address the environmental concerns on Tl pollution in a geo-environmental perspective. Tl associated with the epithermal metallogenesis of sulfide minerals has been documented to disperse readily and accumulate through the geo-environmental processes of soil enrichment, water transportation and food crop growth beyond a mineralized zone. The enrichments of Tl in local soil, water, and crops may result in Tl pollution and consequent adverse health effects, e.g. chronic Tl poisoning. Investigation of the baseline Tl in the geo-environment, proper land use and health-related environmental planning and regulation are critical to prevent the Tl pollution. Examination of the human urinary Tl concentration is a quick approach to identify exposure of Tl pollution to humans. The experiences of Tl pollution in China can provide important lessons for many other regions in the world with similar geo-environmental contexts because of the high mobility and toxicity of Tl.

  2. Geo-environmental mapping tool applied to pipeline design

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Karina de S.; Calle, Jose A.; Gil, Euzebio J. [Geomecanica S/A Tecnologia de Solo Rochas e Materiais, Rio de Janeiro, RJ (Brazil); Sare, Alexandre R. [Geomechanics International Inc., Houston, TX (United States); Soares, Ana Cecilia [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The Geo-Environmental Mapping is an improvement of the Geological-Geotechnical Mapping used for basic pipeline designs. The main purpose is to assembly the environmental, geotechnical and geological concepts in a methodological tool capable to predict constrains and reduce the pipeline impact to the environment. The Geo-Environmental mapping was built to stress the influence of soil/structure interaction, related to the physical effect that comes from the contact between structures and soil or rock. A Geological-Geotechnical-Environmental strip (chart) was presented to emphasize the pipeline operational constrains and its influence to the environment. The mapping was developed to clearly show the occurrence and properties of geological materials divided into geotechnical domain units (zones). The strips present construction natural properties, such as: excavability, stability of the excavation and soil re-use capability. Also, the environmental constrains were added to the geological-geotechnical mapping. The Geo-Environmental Mapping model helps the planning of the geotechnical and environmental inquiries to be carried out during executive design, the discussion on the types of equipment to be employed during construction and the analysis of the geological risks and environmental impacts to be faced during the built of the pipeline. (author)

  3. Soot and chemiluminescence in diesel combustion of bio-derived, oxygenated and reference fuels

    NARCIS (Netherlands)

    Klein-Douwel, R.J.H.; Donkerbroek, A.J.; Vliet, A.P. van; Boot, M.D.; Somers, L.M.T.; Baert, R.S.G.; Dam, N.J.; Meulen, J.J. ter

    2009-01-01

    High-speed imaging, spectroscopy and thermodynamical characterization are applied to an optically accessible, heavy-duty diesel engine in order to compare sooting and chemiluminescence behaviour of bio-derived, oxygenated fuels and various reference fuels. The fuels concerned include the bio-derived

  4. Measuring the activity of BioBrick promoters using an in vivo reference standard

    Directory of Open Access Journals (Sweden)

    Kelly Jason R

    2009-03-01

    Full Text Available Abstract Background The engineering of many-component, synthetic biological systems is being made easier by the development of collections of reusable, standard biological parts. However, the complexity of biology makes it difficult to predict the extent to which such efforts will succeed. As a first practical example, the Registry of Standard Biological Parts started at MIT now maintains and distributes thousands of BioBrick™ standard biological parts. However, BioBrick parts are only standardized in terms of how individual parts are physically assembled into multi-component systems, and most parts remain uncharacterized. Standardized tools, techniques, and units of measurement are needed to facilitate the characterization and reuse of parts by independent researchers across many laboratories. Results We found that the absolute activity of BioBrick promoters varies across experimental conditions and measurement instruments. We choose one promoter (BBa_J23101 to serve as an in vivo reference standard for promoter activity. We demonstrated that, by measuring the activity of promoters relative to BBa_J23101, we could reduce variation in reported promoter activity due to differences in test conditions and measurement instruments by ~50%. We defined a Relative Promoter Unit (RPU in order to report promoter characterization data in compatible units and developed a measurement kit so that researchers might more easily adopt RPU as a standard unit for reporting promoter activity. We distributed a set of test promoters to multiple labs and found good agreement in the reported relative activities of promoters so measured. We also characterized the relative activities of a reference collection of BioBrick promoters in order to further support adoption of RPU-based measurement standards. Conclusion Relative activity measurements based on an in vivoreference standard enables improved measurement of promoter activity given variation in measurement

  5. Lymphatic filariasis transmission risk map of India, based on a geo-environmental risk model.

    Science.gov (United States)

    Sabesan, Shanmugavelu; Raju, Konuganti Hari Kishan; Subramanian, Swaminathan; Srivastava, Pradeep Kumar; Jambulingam, Purushothaman

    2013-09-01

    The strategy adopted by a global program to interrupt transmission of lymphatic filariasis (LF) is mass drug administration (MDA) using chemotherapy. India also followed this strategy by introducing MDA in the historically known endemic areas. All other areas, which remained unsurveyed, were presumed to be nonendemic and left without any intervention. Therefore, identification of LF transmission risk areas in the entire country has become essential so that they can be targeted for intervention. A geo-environmental risk model (GERM) developed earlier was used to create a filariasis transmission risk map for India. In this model, a Standardized Filariasis Transmission Risk Index (SFTRI, based on geo-environmental risk variables) was used as a predictor of transmission risk. The relationship between SFTRI and endemicity (historically known) of an area was quantified by logistic regression analysis. The quantified relationship was validated by assessing the filarial antigenemia status of children living in the unsurveyed areas through a ground truth study. A significant positive relationship was observed between SFTRI and the endemicity of an area. Overall, the model prediction of filarial endemic status of districts was found to be correct in 92.8% of the total observations. Thus, among the 190 districts hitherto unsurveyed, as many as 113 districts were predicted to be at risk, and the remaining at no risk. The GERM developed on geographic information system (GIS) platform is useful for LF spatial delimitation on a macrogeographic/regional scale. Furthermore, the risk map developed will be useful for the national LF elimination program by identifying areas at risk for intervention and for undertaking surveillance in no-risk areas.

  6. Assessment of Geological Security and Integrated Assessment Geo-environmental Suitability in Worst-hit Areas in Wenchuan Quake

    Institute of Scientific and Technical Information of China (English)

    LI Wenpeng; WEN Dongguang; ZHOU Aiguo; SUN Xiaoming; MENG Hui; SHI Jusong; CHEN Zongyu; XHANG Liqin; FENG Xiaoming; LIU Changli; ZHOU Jianwei

    2009-01-01

    The Wenchuan earthquake in 2008 and geo-hazards triggered by the earthquake caused large injuries and deaths as well as destructive damage for infrastructures like construction, traffic and electricity. It is urgent to select relatively secure areas for townships and cities constructed in high mountainous regions with high magnitude earthquakes. This paper presents the basic thoughts, evaluation indices and evaluation methods of geological security evaluation, water and land resources security demonstration and integrated assessments of geo-environmental suitability for reconstruction in alp and ravine with high magnitude earthquakes, which are applied in the worst-hit areas (12 counties). The integrated assessment shows that: (1) located in the Longmenshan fault zone, the evaluated area is of poor regional crust stability, in which the unstable and second unstable areas account for 79% of the total; (2) the geo-hazards susceptibility is high in the evaluation area. The spots of geo-hazards triggered by earthquake are mainly distributed along the active fault zone with higher distribution in the moderate and high mountains area, in which the areas of high and moderate susceptibility zoning accounts for 40.1% of the total; (3) geological security is poor in the evaluated area, in which the area of the unsuitable construction occupies 73.1%, whereas in the suitable construction area, the areas of geological security, second security and insecurity zoning account for 8.3%, 9.3% and 9.3% of the evaluated area respectively; (4) geo-environmental suitability is poor in the evaluated area, in which the areas of suitability and basic suitability zoning account for 3.5% and 7.3% of the whole evaluation area.

  7. Challenges for Australia's Bio/Nanopharma Policies: trade deals, public goods and reference pricing in sustainable industrial renewal.

    Science.gov (United States)

    Faunce, Thomas A

    2007-06-01

    Industrial renewal in the bio/nanopharma sector is important for the long term strength of the Australian economy and for the health of its citizens. A variety of factors, however, may have caused inadequate attention to focus on systematically promoting domestic generic and small biotechnology manufacturers in Australian health policy. Despite recent clarifications of 'springboarding' capacity in intellectual property legislation, federal government requirements for specific generic price reductions on market entry and the potential erosion of reference pricing through new F1 and F2 categories for the purposes of Pharmaceutical Benefits Scheme (PBS) assessments, do not appear to be coherently designed to sustainably position this industry sector in 'biologics,' nanotherapeutics and pharmacogenetics. There also appears to have been little attention paid in this context to policies fostering industry sustainability and public affordability (as encouraged by the National Medicines Policy). One notable example includes that failure to consider facilitating mutual exchanges on regulatory assessment of health technology safety and cost-effectiveness (including reference pricing) in the context of ongoing free trade negotiations between Australia and China (the latter soon to possess the world's largest generic pharmaceutical manufacturing capacity). The importance of a thriving Australian domestic generic pharmaceutical and bio/nano tech industry in terms of biosecurity, similarly appears to have been given insufficient policy attention.Reasons for such policy oversights may relate to increasing interrelationships between generic and 'brand-name' manufacturers and the scale of investment required for the Australian generics and bio/nano technology sector to be a significant driver of local production. It might also result from singularly effective lobbying pressure exerted by Medicines Australia, the 'brand-name' pharmaceutical industry association, utilising

  8. A Geo-Environmental Analysis of the Groundwater Resource vis-a-vis Surface Water Scenario in Guwahati City

    Directory of Open Access Journals (Sweden)

    Neelkamal Das

    2013-08-01

    Full Text Available Guwahati city is located on a unique geo-environmental setting with an interface of hills and valleys along with a prominent river front. The existence of various surface water sources, geo-hydrological set up and rainfall intensity play a significant role in the ground water regime of the city. However, rapid urbanisation of the city during the last few decades has altered the landscape of the city and disturbed the water retention capacity as well as the flow dynamics of various surface water sources, thereby affecting the infiltration rate to a great extent. Unprecedented rise in the population of the city has exerted more pressure on the various sources of water, particularly the groundwater resource. It has thus become imperative to utilise the various sources of water in a more systematic and scientific manner, giving due emphasis to the water requirement and the prevailing hydrological conditions of the area. Moreover, it is also observed that the city experiences an average annual rainfall of 162 cm with about 110 rainy days per year. The city thus has enough potential for harvesting the rainwater it receives, instead of allowing it to flow untapped. Rainwater can be tapped and utilised to revive the various surface water sources of the city, thereby facilitating natural groundwater recharge, as surface water bodies like wetlands, lakes and ponds do act as potential groundwater recharge zones.

  9. AN ANALYSIS OF THE "BIO" / "ECO" PRODUCTS MARKET, REFERRING TO THE EU AND ROMANIA

    Directory of Open Access Journals (Sweden)

    Ionel BOSTAN

    2016-03-01

    Full Text Available The EU and Canada represent the largest market in the world for the sale of ecological products attracting exports from many third countries and recording a total sale of 95% of the worldwide total market. The European market for ecological products – also known as “bio” / “eco” – in absolute figures – is somewhere around 20 billiards euro/year, and in the case of Romania, the market for those products varies around 200 million euro/year. According to European legislation, there are harmonized provisions and procedures for the import of ecological products which can be implemented in two ways: either by complying with the EU legislation on ecologic products, or based on the equivalence between the existent standards and control systems. In many European countries, the operators on such a market obey the rules established by Legislation for ecologic productions strictly. In Romania, a sanctioning system against those economic operators who fraudulently use product labels suggesting they are organic products has just recently been considered. Taking into consideration all these aspects, the present paper relies on the most recent bibliographic and statistical references in this field.

  10. Mining geo-environmental impact assessment of Heshan City%合山市矿山地质环境影响评价研究

    Institute of Scientific and Technical Information of China (English)

    唐朝晖; 刘楠; 柴波; 周建伟

    2012-01-01

    Heshan City is a resource-exhausted cities, which has been developed from coal mine industry and has been undergoing a large-scale development of economic transformation and urban construction. The mining geo-environmental ( denoted as G-E) impact assessment is an essential study to control urban socio-economic sustainable development. The assessment consists of two levels of contents, with first one being the assessment of the impact of mining activities on geo-environment and the second one being the assessment of the impact of urban construction on geo-environment. Firstly, assessment factors system were developed based on three geo-environmental elements ( i. e. mining geo-environmental conditions, mining status and mining geo-environmental problems ) and nine impact factors including landform, vegetation cover, engineering petrofabric, mine density, coal tilt angle, the ratio of mining depth and the thick of coal seam, the extent of the land resources damage, the extent of water resources damage and the strength of geological hazards. Then, the fuzzy comprehensive evaluation model is utilized for assessing the mining geo-environmental impact in the first level and the comprehensive index assessment model is employed for the second level assessment. Based on the assessment results the Hehan City was separated into severely affected area with 62. 87 km2, less severely affected areas with 118.84 km and not severely affected areas with 175.99 km , accounting for 17. 6% , 33. 2% and 79. 2% , respectively, of the total area of the City. The conclusion obtained from this study can be used as an important basis for the comprehensive management of mining geo-environmental and integrated renovation in Heshan City.%广西合山属于煤炭资源枯竭型城市,正在经历的市域经济转型与大规模城市建设,使得矿山地质环境影响评价成为一项基础性工作.将矿山地质环境影响评价划分为两个层次,即采矿活动对矿山地质环境

  11. Selection of Reference Genes for RT-qPCR Analysis in the Monarch Butterfly, Danaus plexippus (L., a Migrating Bio-Indicator.

    Directory of Open Access Journals (Sweden)

    Huipeng Pan

    Full Text Available Reverse transcriptase-quantitative polymerase chain reaction (RT-qPCR is a powerful technique to quantify gene expression. To facilitate gene expression study and obtain accurate results, normalization relative to stably expressed reference genes is crucial. The monarch butterfly, Danaus plexippus (L., is one of the most recognized insect species for its spectacular annual migration across North America. Besides its great voyages, D. plexippus has drawn attention to its role as a bio-indicator, ranging from genetically modified organisms (GMOs to natural ecosystems. In this study, nine reference genes from D. plexippus genome were selected as the candidate reference genes. The expression profiles of these candidates under various biotic and abiotic conditions were evaluated using the four readily available computational programs, BestKeeper, Normfinder, geNorm, and ΔCt method, respectively. Moreover, RefFinder, a web-based computational platform integrating the four above mentioned algorisms, provided a comprehensive ranking of the stability of these reference genes. As a result, a suite of reference genes were recommended for each experimental condition. Specifically, elongation factor 1α (EF1A and ribosomal protein 49 (RP49 were the most stable reference genes, respectively, under biotic (development, tissue, and sex and abiotic (photoperiod, temperature, and dietary RNAi conditions. With the recent release of a 273-million base pair draft genome, results from this study allow us to establish a standardized RT-qPCR analysis and lay a foundation for the subsequent genomic and functional genomic research in D. plexippus, a major bio-indicator and an emerging model for migratory animals.

  12. Evaluating the influence of geo-environmental factors on gully erosion in a semi-arid region of Iran: An integrated framework.

    Science.gov (United States)

    Rahmati, Omid; Tahmasebipour, Naser; Haghizadeh, Ali; Pourghasemi, Hamid Reza; Feizizadeh, Bakhtiar

    2017-02-01

    Despite the importance of soil erosion in sustainable development goals in arid and semi-arid areas, the study of the geo-environmental conditions and factors influencing gully erosion occurrence is rarely undertaken. As effort to this challenge, the main objective of this study is to apply an integrated approach of Geographic Object-Based Image Analysis (GEOBIA) together with high-spatial resolution imagery (SPOT-5) for detecting gully erosion features at the Kashkan-Poldokhtar watershed, Iran. We also aimed to apply a Conditional Probability (CP) model for establishing the spatial relationship between gullies and the Geo-Environmental Factors (GEFs). The gully erosion inventory map prepared using GEOBIA and field surveying was randomly partitioned into two subsets: (1) part 1 that contains 70% was used in the training phase of the CP model; (2) part 2 is a validation dataset (30%) for validation of the model and to confirm its accuracy. Prediction performances of the GEOBIA and CP model were checked by overall accuracy and Receiver Operating Characteristics (ROC) curve methods, respectively. In addition, the influence of all GEFs on gully erosion was evaluated by performing a sensitivity analysis model. The validation findings illustrated that overall accuracy for GEOBIA approach and the area under the ROC curve for the CP model were 92.4% and 89.9%, respectively. Also, based on sensitivity analysis, soil texture, drainage density, and lithology represent significantly effects on the gully erosion occurrence. This study has shown that the integrated framework can be successfully used for modeling gully erosion occurrence in a data-poor environment.

  13. Stability evaluation and chemical characterization of different vegetable oils viewing the search for candidates for certified reference materials for bio diesel; Avaliacao da estabilidade e caracterizacao quimica de diferentes oleos vegetais visando a busca de candidatos a materiais de referencia certificado (MRC) para biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Georgiana F. da; Fonseca, Mauricio G.; Goncalves, Lenise V.F.; Silva, Regina Celia F. da; Silva, Fernanda M.R. da; Rodrigues, Janaina M. [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (LABOR/INMETRO), Duque de Caxias, RJ (Brazil). Lab. de Analises Organicas; Leal, Rodrigo V.P. [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (LAMBOC/INMETRO), Duque de Caxias, RJ (Brazil). Lab. de Motores, Combustiveis e Lubrificantes], Email: rvleal@inmetro.gov.br; Cunha, Valnei S. [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (DIMCI/INMETRO), Duque de Caxias, RJ (Brazil). Diretoria de Metrologia Cientifica e Industrial

    2009-07-01

    Viewing the characterization of the various vegetable oils aiming to obtain a data bank that allows the production of certified reference materials for bio diesel of different blends, a study of chemical-physical characterization of different oils and derivative of bio diesel.

  14. Design and implementation of a wireless (Bluetooth) four channel bio-instrumentation amplifier and digital data acquisition device with user-selectable gain, frequency, and driven reference.

    Science.gov (United States)

    Cosmanescu, Alin; Miller, Benjamin; Magno, Terence; Ahmed, Assad; Kremenic, Ian

    2006-01-01

    A portable, multi-purpose Bio-instrumentation Amplifier and Data AcQuisition device (BADAQ) capable of measuring and transmitting EMG and EKG signals wirelessly via Bluetooth is designed and implemented. Common topologies for instrumentation amplifiers and filters are used and realized with commercially available, low-voltage, high precision operational amplifiers. An 8-bit PIC microcontroller performs 10-bit analog-to-digital conversion of the amplified and filtered signals and controls a Bluetooth transceiver capable of wirelessly transmitting the data to any Bluetooth enabled device. Electrical isolation between patient/subject, circuitry, and ancillary equipment is achieved by optocoupling components. The design focuses on simplicity, portability, and affordability.

  15. 隆博煤矿矿山地质环境影响评估及防治对策%Research on Mining Geo-environmental Impact Assessment and Its Prevention Countermeasures in Longbo Mine

    Institute of Scientific and Technical Information of China (English)

    张志祥; 张永波; 赵雪花; 杨军耀

    2013-01-01

    Based on the analysis of topography, geology, hydrogeology, coal seam mining, etc and field observation of Longbo Mine, mining geo-environmental impact assessment was researched from four aspects such as geological disasters, aquifer breakage, landforms and landscape devastation and land resources damage. Results indicate that the influence of coal mining on geological disasters, aquifer and land resources is serious, and the influence of coal mining on landforms and landscape is comparatively serious. According to assessment results, comprehensive control strategies were put forward for mining geo-environment. Research results will provide scientific basis for mining geo-environmental protection and integrated renovation of Longbo Mine.%在分析隆博煤矿地形地貌、地质、水文地质、煤层开采等资料及现场踏勘的基础上,从地质灾害、含水层破坏、地形地貌景观破坏及土地资源破坏四个方面进行了矿山地质环境影响评估研究.结果表明,采煤对地质灾害、含水层及土地资源影响程度严重,对地形地貌景观影响程度较严重.依据评估结果,提出了矿山地质环境综合防治对策.研究成果可为隆博煤矿矿山地质环境保护与恢复治理提供科学依据.

  16. Automated extraction of DNA from reference samples from various types of biological materials on the Qiagen BioRobot EZ1 Workstation

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Jørgensen, Mads; Hansen, Anders Johannes

    2009-01-01

    We have validated and implemented a protocol for DNA extraction from various types of biological materials using a Qiagen BioRobot EZ1 Workstation. The sample materials included whole blood, blood from deceased, buccal cells on Omni swabs and FTA Cards, blood on FTA Cards and cotton swabs......, and muscle biopsies. The DNA extraction was validated according to EN/ISO 17025 for the STR kits AmpFlSTR« Identifiler« and AmpFlSTR« Yfiler« (Applied Biosystems). Of 298 samples extracted, 11 (4%) did not yield acceptable results. In conclusion, we have demonstrated that extraction of DNA from various types...... of biological material can be performed quickly and without the use of hazardous chemicals, and that the DNA may be successfully STR typed according to the requirements of forensic genetic investigations accredited according to EN/ISO 17025...

  17. Gas phase bio-filter for the removal of triethylamine (TEA) from air: microbial diversity analysis with reference to design parameters.

    Science.gov (United States)

    Gandu, Bharath; Sandhya, K; Gangagni Rao, A; Swamy, Y V

    2013-07-01

    Biotic (packed bio-filter; PBF) and abiotic (packed filter; PF) studies were carried out on two similar 2L gas phase filters for the removal of triethylamine (TEA) at inlet concentration in the range of 250-280 ppmV. Removal efficiency (RE) of PBF remained in the range of 90-99% during the stable period of operation (170 days) whereas RE of PF dropped gradually to 10% in a span of 90 days. Five different bacterial species viz; Aeromonas sp., Alcaligenes sp., Arthrobacter sp., Klebsiella sp., and Pseudomonas sp., were identified in PBF. It was observed that diethyl amine, ethylamine and nitrate were formed as metabolites during the degradation pathway. Empty bed residence time of 20s, mass loading rate of 202.26 g/m(3)/h, space velocity of 178.82 m(3)/m(3)/h and elimination capacity of 201.52 g/m(3)/h were found to be optimum design parameters for PBF to get RE in the range of 90-99%.

  18. 76 FR 53631 - BioPreferred Program

    Science.gov (United States)

    2011-08-29

    ... biobased preferred procurement program (one part of the BioPreferred Program) is available on the Internet... reference Amend: to: And adding in its place: Sec. 2904.2, definition of ``Biobased part 2902 part 3201. content''. Sec. 2904.2, definition of part 2902 part 3201. ``BioPreferred Product''. Sec....

  19. Challenges for bio-based products in sustainable value chains

    NARCIS (Netherlands)

    Cardon, L.; Lin, J.W.; De Groote, M.; Ragaert, K.; Kopecka, J.A.; Koster, R.P.

    2011-01-01

    This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referred to as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chains including activities after end-of-life of

  20. Challenges for bio-based products in sustainable value chains

    OpenAIRE

    L. Cardon; Lin, J.W.; De Groote, M.; Ragaert, K.; Kopecka, J.A.; Koster, R.P.

    2011-01-01

    This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referred to as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chains including activities after end-of-life of products, (2) value communication between stakeholders in extended value chains, and (3) creating an integrated development approach for optimized bio-based products. Most existing models for valu...

  1. Branding the bio/biomedical engineering degree.

    Science.gov (United States)

    Voigt, Herbert F

    2011-01-01

    The future challenges to medical and biological engineering, sometimes referred to as biomedical engineering or simply bioengineering, are many. Some of these are identifiable now and others will emerge from time to time as new technologies are introduced and harnessed. There is a fundamental issue regarding "Branding the bio/biomedical engineering degree" that requires a common understanding of what is meant by a B.S. degree in Biomedical Engineering, Bioengineering, or Biological Engineering. In this paper we address some of the issues involved in branding the Bio/Biomedical Engineering degree, with the aim of clarifying the Bio/Biomedical Engineering brand.

  2. PacBio Sequencing and Its Applications

    Institute of Scientific and Technical Information of China (English)

    Anthony Rhoads; Kin Fai Au

    2015-01-01

    Single-molecule, real-time sequencing developed by Pacific BioSciences offers longer read lengths than the second-generation sequencing (SGS) technologies, making it well-suited for unsolved problems in genome, transcriptome, and epigenetics research. The highly-contiguous de novo assemblies using PacBio sequencing can close gaps in current reference assemblies and characterize structural variation (SV) in personal genomes. With longer reads, we can sequence through extended repetitive regions and detect mutations, many of which are associated with dis-eases. Moreover, PacBio transcriptome sequencing is advantageous for the identification of gene isoforms and facilitates reliable discoveries of novel genes and novel isoforms of annotated genes, due to its ability to sequence full-length transcripts or fragments with significant lengths. Addition-ally, PacBio’s sequencing technique provides information that is useful for the direct detection of base modifications, such as methylation. In addition to using PacBio sequencing alone, many hybrid sequencing strategies have been developed to make use of more accurate short reads in conjunction with PacBio long reads. In general, hybrid sequencing strategies are more affordable and scalable especially for small-size laboratories than using PacBio Sequencing alone. The advent of PacBio sequencing has made available much information that could not be obtained via SGS alone.

  3. Bio Engineering Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Description/History: Chemistry and biology laboratoriesThe Bio Engineering Laboratory (BeL) is theonly full spectrum biotechnology capability within the Department...

  4. Bio Engineering Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Description/History: Chemistry and biology laboratories The Bio Engineering Laboratory (BeL) is theonly full spectrum biotechnology capability within the Department...

  5. Bio-fuels for the gas turbine: A review

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, K.K. [Mechanical Engineering Department, Medi-Caps Institute of Technology and Management, Pigdamber, Rau, Indore (M.P.) (India); Rehman, A.; Sarviya, R.M. [Department of Mechanical Engineering, MANIT, Bhopal (M.P.) (India)

    2010-12-15

    Due to depletion of fossil fuel, bio-fuels have generated a significant interest as an alternative fuel for the future. The use of bio-fuels to fuel gas turbine seems a viable solution for the problems of decreasing fossil-fuel reserves and environmental concerns. Bio-fuels are alternative fuels, made from renewable sources and having environmental benefit. In recent years, the desire for energy independence, foreseen depletion of nonrenewable fuel resources, fluctuating petroleum fuel costs, the necessity of stimulating agriculture based economy, and the reality of climate change have created an interest in the development of bio-fuels. The application of bio-fuels in automobiles and heating applications is increasing day by day. Therefore the use of these fuels in gas turbines would extend this application to aviation field. The impact of costly petroleum-based aviation fuel on the environment is harmful. So the development of alternative fuels in aviation is important and useful. The use of liquid and gaseous fuels from biomass will help to fulfill the Kyoto targets concerning global warming emissions. In addition, to reduce exhaust emission waste gases and syngas, etc., could be used as a potential gas turbine fuel. The term bio-fuel is referred to alternative fuel which is produced from biomass. Such fuels include bio-diesel, bio-ethanol, bio-methanol, pyrolysis oil, biogas, synthetic gas (dimethyl ether), hydrogen, etc. The bio-ethanol and bio-methanol are petrol additive/substitute. Bio-diesel is an environment friendly alternative liquid fuel for the diesel/aviation fuel. The gas turbine develops steady flame during its combustion; this feature gives a flexibility to use alternative fuels. Therefore so the use of different bio-fuels in gas turbine has been investigated by a good number of researchers. The suitability and modifications in the existing systems are also recommended. (author)

  6. State and parameter estimation in bio processes

    Energy Technology Data Exchange (ETDEWEB)

    Maher, M.; Roux, G.; Dahhou, B. [Centre National de la Recherche Scientifique (CNRS), 31 - Toulouse (France)]|[Institut National des Sciences Appliquees (INSA), 31 - Toulouse (France)

    1994-12-31

    A major difficulty in monitoring and control of bio-processes is the lack of reliable and simple sensors for following the evolution of the main state variables and parameters such as biomass, substrate, product, growth rate, etc... In this article, an adaptive estimation algorithm is proposed to recover the state and parameters in bio-processes. This estimator utilizes the physical process model and the reference model approach. Experimentations concerning estimation of biomass and product concentrations and specific growth rate, during batch, fed-batch and continuous fermentation processes are presented. The results show the performance of this adaptive estimation approach. (authors) 12 refs.

  7. Bios data analyzer.

    Science.gov (United States)

    Sabelli, H; Sugerman, A; Kovacevic, L; Kauffman, L; Carlson-Sabelli, L; Patel, M; Konecki, J

    2005-10-01

    The Bios Data Analyzer (BDA) is a set of computer programs (CD-ROM, in Sabelli et al., Bios. A Study of Creation, 2005) for new time series analyses that detects and measures creative phenomena, namely diversification, novelty, complexes, nonrandom complexity. We define a process as creative when its time series displays these properties. They are found in heartbeat interval series, the exemplar of bios .just as turbulence is the exemplar of chaos, in many other empirical series (galactic distributions, meteorological, economic and physiological series), in biotic series generated mathematically by the bipolar feedback, and in stochastic noise, but not in chaotic attractors. Differencing, consecutive recurrence and partial autocorrelation indicate nonrandom causation, thereby distinguishing chaos and bios from random and random walk. Embedding plots distinguish causal creative processes (e.g. bios) that include both simple and complex components of variation from stochastic processes (e.g. Brownian noise) that include only complex components, and from chaotic processes that decay from order to randomness as the number of dimensions is increased. Varying bin and dimensionality show that entropy measures symmetry and variety, and that complexity is associated with asymmetry. Trigonometric transformations measure coexisting opposites in time series and demonstrate bipolar, partial, and uncorrelated opposites in empirical processes and bios, supporting the hypothesis that bios is generated by bipolar feedback, a concept which is at variance with standard concepts of polar and complementary opposites.

  8. BioProject

    Data.gov (United States)

    U.S. Department of Health & Human Services — The BioProject database provides an organizational framework to access information about research projects with links to data that have been or will be deposited...

  9. BioSentinel Project

    Data.gov (United States)

    National Aeronautics and Space Administration — BioSentinel technology will provide critical information about how living systems, from humans down to cells, adapt, respond and survive in deep space, beyond LEO...

  10. BioSystems

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NCBI BioSystems Database provides integrated access to biological systems and their component genes, proteins, and small molecules, as well as literature...

  11. Engineering BioBrick vectors from BioBrick parts

    Directory of Open Access Journals (Sweden)

    Knight Thomas F

    2008-04-01

    Full Text Available Abstract Background The underlying goal of synthetic biology is to make the process of engineering biological systems easier. Recent work has focused on defining and developing standard biological parts. The technical standard that has gained the most traction in the synthetic biology community is the BioBrick standard for physical composition of genetic parts. Parts that conform to the BioBrick assembly standard are BioBrick standard biological parts. To date, over 2,000 BioBrick parts have been contributed to, and are available from, the Registry of Standard Biological Parts. Results Here we extended the same advantages of BioBrick standard biological parts to the plasmid-based vectors that are used to provide and propagate BioBrick parts. We developed a process for engineering BioBrick vectors from BioBrick parts. We designed a new set of BioBrick parts that encode many useful vector functions. We combined the new parts to make a BioBrick base vector that facilitates BioBrick vector construction. We demonstrated the utility of the process by constructing seven new BioBrick vectors. We also successfully used the resulting vectors to assemble and propagate other BioBrick standard biological parts. Conclusion We extended the principles of part reuse and standardization to BioBrick vectors. As a result, myriad new BioBrick vectors can be readily produced from all existing and newly designed BioBrick parts. We invite the synthetic biology community to (1 use the process to make and share new BioBrick vectors; (2 expand the current collection of BioBrick vector parts; and (3 characterize and improve the available collection of BioBrick vector parts.

  12. BioArchitecture

    OpenAIRE

    Gunning, Peter

    2012-01-01

    Volume 1 has defined the scope of BioArchitecture. From the outset we have strived to ensure that BioArchitecture is not limited to the three major polymer systems of the cytoplasm. I am happy to say that a cursory glance at the contents of volume 1 makes it clear that we are interested in all aspects of bioarchitecture from molecules to polymers to cells to tissue to the organism.

  13. BioFET-SIM

    DEFF Research Database (Denmark)

    Hediger, M. R.; Martinez, K. L.; Nygård, J.

    2013-01-01

    signals through its web-based interface www.biofetsim.org. The model also allows for predictions of the effects of changes in the experimental setup on the sensor signal. After an introduction to nanowire-based FET biosensors, this chapter reviews the theoretical basis of BioFET-SIM models describing both...... single and multiple charges on the analyte. Afterwards the usage of the interface and its relative command line version is briefly shown. Finally, possible applications of the BioFET-SIM model are presented. Among the possible uses of the interface, the effects on the predicted signal of pH, buffer ionic...... strength, analyte concentration, and analyte relative orientation on nanowire surface are illustrated. Wherever possible, a comparison to experimental data available in literature is given, displaying the potential of BioFETSIM for interpreting experimental results....

  14. Engineering BioBrick vectors from BioBrick parts

    OpenAIRE

    Knight Thomas F; Endy Drew; Shetty Reshma P

    2008-01-01

    Abstract Background The underlying goal of synthetic biology is to make the process of engineering biological systems easier. Recent work has focused on defining and developing standard biological parts. The technical standard that has gained the most traction in the synthetic biology community is the BioBrick standard for physical composition of genetic parts. Parts that conform to the BioBrick assembly standard are BioBrick standard biological parts. To date, over 2,000 BioBrick parts have ...

  15. Geo-environmental Protection and Recovery Management of Hongqi Third Mine in He'nan%河南红旗三矿矿山地质环境保护与恢复治理

    Institute of Scientific and Technical Information of China (English)

    张婧; 陈南祥; 张福然

    2013-01-01

    Through theoretical analysis and field survey, the geological environment problems in Hongqi Third Mine of He' nan are found out and understood deeply, the quantitative-half quantitative evaluation method is used for the present situation evaluation and predictive evaluation of the geological environment effects, the superposition method is used for dividing the geological environment protection and treatment area, and the technical measures for prevention, protection, recovery and management are put forward targetedly, which could provide some references for other engineering design personnel of similar projects.%通过理论分析和实地调查,深入了解河南红旗三矿的矿山地质环境情况,利用定量-半定量评估方法对其地质环境影响程度进行了现状评估和预测评估,利用叠加法划分了地质环境保护与恢复治理区域,有针对性地提出了预防、保护和恢复治理的技术措施,工程设计人员从事类似工程设计提供一定的参考依据.

  16. BioMEMS

    CERN Document Server

    Urban, Gerald A

    2007-01-01

    Explosive growth in the field of Microsystem Technology has introduced a variety of promising products in major disciplines from microelectronics to life sciences. 'Biomes' is a discipline which focuses on microsystems for living systems. This work presents the exciting field of bio-microsystems.

  17. Bio-Culturalism

    DEFF Research Database (Denmark)

    Grodal, Torben Kragh

    2007-01-01

    The article argues on the basis of analyses of successful films for children that not only cultural determinants but also innate determinats are important, and that film studies should combine cultural studies with cognitive theory, evolutionary theory and neuroscience, an approach that is called...... Bio-culturalism....

  18. Bio-technologies; Biotechnologies

    Energy Technology Data Exchange (ETDEWEB)

    Grawitz, X. [Systems Bio Industries, 92 - Boulogne Billancourt (France)

    1997-12-31

    This paper is a series of transparencies which describes the measures taken by Systems Bio-Industries company to adapt its central heating plants, turbines, engines and dryers to the new French 2910 by-law about thermal efficiency and environmental impact of heating plants. The project of development of a cogeneration system in the Angouleme site is briefly described. (J.S.)

  19. Congestive heart failure patient monitoring using wearable Bio-impedance sensor technology.

    Science.gov (United States)

    Seulki Lee; Squillace, Gabriel; Smeets, Christophe; Vandecasteele, Marianne; Grieten, Lars; de Francisco, Ruben; Van Hoof, Chris

    2015-08-01

    A new technique to monitor the fluid status of congestive heart failure (CHF) patients in the hospital is proposed and verified in a clinical trial with 8 patients. A wearable Bio-impedance (BioZ) sensor allows a continuous localized measurement which can be complement clinical tools in the hospital. Thanks to the multi-parametric approach and correlation analysis with clinical reference, BioZ is successfully shown as a promising parameter for continuous and wearable CHF patient monitoring application.

  20. Geo-environmental assessment of the city and municipality of Santa Clara for improving the health surveillance system Evaluación geoambiental de la ciudad y el municipio de Santa Clara, Cuba, para el perfeccionamiento del sistema de vigilancia de salud

    Directory of Open Access Journals (Sweden)

    Mabel Font Aranda

    2008-06-01

    Full Text Available This paper presents the results of the geo-environmental assessment of the city and municipality of Santa Clara, Cuba, developed with the purpose of determining and focusing on environmental health problems, and to propose preventive actions to minimize them. To accomplish the goal of contributing to improvement the Health Surveillance System the theoretical-methodological bases that justify the contribution of the geographical sciences to the solution of this problem have been developed. These approaches are implemented in the study case of Santa Clara, offering valuable information for the office of Municipal Public Health and the Municipal Unit of Hygiene and Epidemiology. Such results favor a rapid and opportune decision-making process in relation to risk factors with spatial and territorial dimension.El artículo expone los resultados de la evaluación geoambiental de la ciudad y el municipio de Santa Clara, Cuba, desarrollada con el propósito de determinar y focalizar problemas de salud ambiental, y proponer acciones preventivas para atenuarlos. Con el fin de contribuir al perfeccionamiento del Sistema de Vigilancia en Salud se desarrollan los fundamentos teóricometodológicos que justifican la contribución de las ciencias geográficas a la solución del problema y se implementan en el caso de estudio, aportando una valiosa información al Sectorial Municipal de Salud Pública y a la Unidad Municipal de Higiene y Epidemiología. La misma favorece la toma de decisiones rápidas y oportunas ante factores de riesgo en su dimensión espacial y territorial.  

  1. Bio-inspired variable structural color materials.

    Science.gov (United States)

    Zhao, Yuanjin; Xie, Zhuoying; Gu, Hongcheng; Zhu, Cun; Gu, Zhongze

    2012-04-21

    Natural structural color materials, especially those that can undergo reversible changes, are attracting increasing interest in a wide variety of research fields. Inspired by the natural creatures, many elaborately nanostructured photonic materials with variable structural colors were developed. These materials have found important applications in switches, display devices, sensors, and so on. In this critical review, we will provide up-to-date research concerning the natural and bio-inspired photonic materials with variable structural colors. After introducing the variable structural colors in natural creatures, we will focus on the studies of artificial variable structural color photonic materials, including their bio-inspired designs, fabrications and applications. The prospects for the future development of these fantastic variable structural color materials will also be presented. We believe this review will promote the communications among biology, bionics, chemistry, optical physics, and material science (196 references).

  2. Reference Revolutions.

    Science.gov (United States)

    Mason, Marilyn Gell

    1998-01-01

    Describes developments in Online Computer Library Center (OCLC) electronic reference services. Presents a background on networked cataloging and the initial implementation of reference services by OCLC. Discusses the introduction of OCLC FirstSearch service, which today offers access to over 65 databases, future developments in integrated…

  3. Explore policies to stimulate Bio LNG using a social cost benefit analysis

    NARCIS (Netherlands)

    Van den Borne, B.

    2015-01-01

    In the joint vision on the future energy mix LNG and bio LNG are being referred to as important opportunities for the Dutch economy to sustain heavy road transport fuels. New policies have to be developed to stimulate a transition to bio LNG in the Netherlands. The economic and societal effects of t

  4. Geo Environmental Investigation of Abuad Dumpsite, Southwestern Nigeria

    Directory of Open Access Journals (Sweden)

    Ogundana, A.K,

    2015-11-01

    Full Text Available Geoenvironmental study of ABUAD female dumpsite was conducted to investigate the suitability of its location and potential impact on groundwater in the environment. Profiling and Vertical electrical sounding methods were employed using Dipole - Dipole and Schlumberger configuration respectively. Five points were sounded and one profile was occupied. Three heterogeneous subsurface lithologic units were established namely; lateritic topsoil, clayey-sand, and, fresh basement. The curve types are simple H and HA. The topsoil and clayey-sand materials are characterized with relatively low resistivity values while the fresh basement materials are characterized with high resistivity values. The average resistivity and thickness values for the topsoil are 280.0Ωm and.2.3m respectively. Clayey-sand was encountered in all the locations with average resistivity and thickness values of 32.0Ωm and 7.3m respectively. Basement is relatively shallow in the study area, it was encountered in all the locations with an average resistivity and depth values to the top of basement of 674Ωm, and 9.6m respectively. Overburden materials are relatively thin within the area with an average resistivity and thickness values of 156Ωm, and 9.6m respectively. The overburden materials constituting the aquiferous units within the study area are porous, vulnerable, and good paths for leachate migration. The relatively low resistivity values within the clayey-sand layers (14 - 61Ωm are suggestive of leachate intrusion, while relatively high resistivity values of the impervious basement are due to their crystalline nature. The proximity of the dumpsite to both the cafeteria and residential halls is a cause for concern.

  5. Geo-environmental Assessment of Al-Ramtha Soils, Jordan

    OpenAIRE

    Saeb Al- Shereideh; Mohammad Wahsha; Nazem El-Radaideh; Ahmed A. Al-Taani; Nabeel Abderahman1; Sanaa Odat; Talal Al- Momani; Mohammad Khawajah

    2015-01-01

    This study aims to characterize the pollution conditions by measuring the concentrations of selected heavy metals. It also intends to investigate the relations between soil genesis and lithology. This provides knowledge about the future of the agricultural development in the area and helps decision makers in the land use planning.

  6. Clinical application of bio ceramics

    Science.gov (United States)

    Anu, Sharma; Gayatri, Sharma

    2016-05-01

    Ceramics are the inorganic crystalline material. These are used in various field such as biomedical, electrical, electronics, aerospace, automotive and optical etc. Bio ceramics are the one of the most active areas of research. Bio ceramics are the ceramics which are biocompatible. The unique properties of bio ceramics make them an attractive option for medical applications and offer some potential advantages over other materials. During the past three decades, a number of major advances have been made in the field of bio ceramics. This review focuses on the use of these materials in variety of clinical scenarios.

  7. The CAS Bio-specimen Centers in Sound Progress

    Institute of Scientific and Technical Information of China (English)

    LI Liangqian; QIAO Gexia; YAO Yijian

    2010-01-01

    @@ Bio-specimen centers, including herbaria and zoological museums, are the most integrated places for the storage of specimens, which are real samples and the most important vouchers for taxonomic and biodiversity studies.The information carried by the specimens is of substantial reference for research on species distribution, history, status, phylogeny and evolution, etc.

  8. bioética

    Directory of Open Access Journals (Sweden)

    Francisco Javier León Correa

    2006-01-01

    Full Text Available Desde el inicio de la publicación de la revista Cuadernos de Bioética, hemos podido comprobar una evolución importante en el desarrollo de esta disciplina, tanto en España como en Latinoamérica, que son los ámbitos donde muy especialmente se difunde. Trataré de señalar los aspectos que considero de mayor interés en los inicios y desarrollo de esta nueva disciplina, para poder entender mejor los retos actualesque enfrenta y cuáles son las líneas que ha seguido la revista en esta andadura inicial, y que deberá seguir para responder a los retos de los próximos años. Es un reto la realidad que vivimos en nuestros países, con la aprobación de leyes impuestas desde los poderes públicos con muy poca o ninguna discusión social que se parezca de lejos al diálogo tolerante racional que propugna la Bioética; con las reformas aceleradas e indecisas de los sistemas de salud; con el cambio del rol del médico y de la relación médico-paciente desde un paternalismo aún presente a un modelo participativo o contractual sin defi nir claramente; con importantes desigualdades en el acceso a la atención de salud dentro de cada propio país, pero a la vez con un creciente reconocimiento de los derechos de los pacientes y de su necesaria participación para mejorar la calidad de la asistencia clínica. Tiene especial importancia valorar cuáles han sido los instrumentos del éxito y de la difusión de la Bioética clínica, y cuáles pueden ser las nuevas propuestas para el desarrollo de la Bioética como una disciplina de debate ético social y político, ligada a las exigencias éticas de la justicia y el desarrollo social. Hemos de ver cuál ha sido el aporte en estos quince años de la revista Cuadernos de Bioética, con la colaboración de cientos de autores de diversos países, en que se ha mantenido fi el a la propuesta de los que la iniciamos en Santiago de Compostela en el año 1990: construir un buen aporte al debate actual de Bio

  9. Bio-Mimetic Sensors Based on Molecularly Imprinted Membranes

    Directory of Open Access Journals (Sweden)

    Catia Algieri

    2014-07-01

    Full Text Available An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported.

  10. BioCMOS Interfaces and Co-Design

    CERN Document Server

    Carrara, Sandro

    2013-01-01

    The application of CMOS circuits and ASIC VLSI systems to problems in medicine and system biology has led to the emergence of Bio/CMOS Interfaces and Co-Design as an exciting and rapidly growing area of research. The mutual inter-relationships between VLSI-CMOS design and the biophysics of molecules interfacing with silicon and/or onto metals has led to the emergence of the interdisciplinary engineering approach to Bio/CMOS interfaces. This new approach, facilitated by 3D circuit design and nanotechnology, has resulted in new concepts and applications for VLSI systems in the bio-world. This book offers an invaluable reference to the state-of-the-art in Bio/CMOS interfaces. It describes leading-edge research in the field of CMOS design and VLSI development for applications requiring integration of biological molecules onto the chip. It provides multidisciplinary content ranging from biochemistry to CMOS design in order to address Bio/CMOS interface co-design in bio-sensing applications.

  11. Bio-forensics

    Energy Technology Data Exchange (ETDEWEB)

    Trewhella, J. (Jill)

    2004-01-01

    Bioforensics presents significant technical challenges. Determining if an outbreak is natural or not, and then providing evidence to trace an outbreak to its origin is very complex. Los Alamos scientists pioneered research and development that has generated leading edge strain identification methods based on sequence data. Molecular characterization of environmental background samples enable development of highly specific pathogen signatures. Economic impacts of not knowing the relationships at the molecular level Many different kinds of data are needed for DNA-based bio-forensics.

  12. Bioética

    OpenAIRE

    Nunes, Cássia Regina Rodrigues [UNESP; Nunes,Amauri Porto

    2004-01-01

    A bioética é um novo campo de conhecimento e uma corrente de pensamento que vem se desenvolvendo amplamente no Brasil, principalmente a partir da década de 90. Nesse artigo buscamos contextualizar o seu surgimento, justificando a necessidade da criação desse neologismo, uma vez que a ética estava de certo modo esquecida, em relação à técnica, restringindo-se apenas à ética profissional. Hoje nos deparamos com uma ampla gama de produções nessa área que ajudam a nortear nossa ação enquanto cida...

  13. Bio-tribology.

    Science.gov (United States)

    Dowson, Duncan

    2012-01-01

    It is now forty six years since the separate topics of friction, lubrication, wear and bearing design were integrated under the title 'Tribology' [Department of Education and Science, Lubrication (Tribology) Education and Research. A Report on the Present Position and Industry's Needs, HMSO, London, 1966]. Significant developments have been reported in many established and new aspects of tribology during this period. The subject has contributed to improved performance of much familiar equipment, such as reciprocating engines, where there have been vast improvements in engine reliability and efficiency. Nano-tribology has been central to remarkable advances in information processing and digital equipment. Shortly after widespread introduction of the term tribology, integration with biology and medicine prompted rapid and extensive interest in the fascinating sub-field now known as Bio-tribology [D. Dowson and V. Wright, Bio-tribology, in The Rheology of Lubricants, ed. T. C. Davenport, Applied Science Publishers, Barking, 1973, pp. 81-88]. An outline will be given of some of the developments in the latter field.

  14. What is BioOne?

    Science.gov (United States)

    Fitzpatrick, Roberta Bronson

    2005-01-01

    BioOne is a Web-based aggregation of full-text, high-impact bioscience research journals. Most of its titles are published by small societies or non-commercial publishers and have not been previously available in electronic format. This column describes the BioOne database and gives some basic information about the best ways to search its content.

  15. Bio-threat microparticle simulants

    Science.gov (United States)

    Farquar, George Roy; Leif, Roald N

    2012-10-23

    A bio-threat simulant that includes a carrier and DNA encapsulated in the carrier. Also a method of making a simulant including the steps of providing a carrier and encapsulating DNA in the carrier to produce the bio-threat simulant.

  16. Bio-threat microparticle simulants

    Science.gov (United States)

    Farquar, George Roy; Leif, Roald

    2014-09-16

    A bio-threat simulant that includes a carrier and DNA encapsulated in the carrier. Also a method of making a simulant including the steps of providing a carrier and encapsulating DNA in the carrier to produce the bio-threat simulant.

  17. Bio-electrosprays: from bio-analytics to a generic tool for the health sciences.

    Science.gov (United States)

    Jayasinghe, Suwan N

    2011-03-07

    Electrosprays or electrospraying is a process by which an aerosol is generated between two charged electrodes. This aerosol generation methodology has been known for well over a century, and has undergone exploration in aerosol and materials sciences, to many other areas of research and development. In one such exploration, electrosprays were partnered with mass spectrometry for the accurate characterisation of molecules. This technology now widely referred to as electrospray ionisation mass spectrometry (ESI MS) significantly contributes to molecular analysis and cancer biology to name a few. In fact these findings were recognised by the Chemistry Nobel Committee in 2002, and have catapulted electrosprays to many areas of research and development. In this review, the author wishes to introduce and discuss another such recent discovery, where electrosprays have been investigated for directly handling living cells and whole organisms. Over the past few years these electrosprays now referred to as "bio-electrosprays" have undergone rigorous developmental studies both in terms of understanding all the associate physical, chemical and biological sciences for completely assessing their effects, if any on the direct handling of living biological materials. Therefore, the review will bring together all the work that has contributed to fully understanding that bio-electrosprays are an inert technology for directly handling living biological materials, while elucidating some unique features they possess over competing technologies. Hence, demonstrating this approach as a flexible methodology for a wide range of applications spanning bio-analytics, diagnostics to the possible creation of synthetic tissues, for repairing and replacing damaged/ageing tissues, to the targeted and controlled delivery of personalised medicine through experimental and/or medical cells and/or genes. Therefore, elucidating the far reaching ramifications bio-electrosprays have to our health sciences

  18. Bio-ethanol

    DEFF Research Database (Denmark)

    Wenzel, Henrik

    2007-01-01

    , however, shown that by following this path, we will lose more than we gain on both CO2 emission and fossil fuel dependency. Being renewable, CO2 neutral and storable, biomass is a priority resource for fossil fuel substitution in general. Investigations of the magnitude of biomass that is or can be made...... available for energy purposes - be it from waste, agricultural residues or energy crops - show, however, that biomass is very limited compared to the potential use of it. Even in the most optimistic near term scenarios (30 years ahead), the total physically available biomass can at maximum substitute around......, but they do not improve the energy balance enough for bio-ethanol to compete with alternative uses of the biomass. When using biomass to substitute fossil fuels in heat & power production, a close to 100% substitution efficiency is achieved. The best alternative for CO2 reduction and oil saving is, therefore...

  19. Combining Bio-inspired Sensing with Bio-inspired Locomotion

    DEFF Research Database (Denmark)

    Shaikh, Danish; Hallam, John; Christensen-Dalsgaard, Jakob

    In this paper we present a preliminary Braitenberg vehicle–like approach to combine bio-inspired audition with bio-inspired quadruped locomotion in simulation. Locomotion gaits of the salamander–like robot Salamandra robotica are modified by a lizard’s peripheral auditory system model that modula......In this paper we present a preliminary Braitenberg vehicle–like approach to combine bio-inspired audition with bio-inspired quadruped locomotion in simulation. Locomotion gaits of the salamander–like robot Salamandra robotica are modified by a lizard’s peripheral auditory system model...... that modulates the parameters of the locomotor central pattern generators. We present phonotactic performance results of the simulated lizard-salamander hybrid robot....

  20. Bio-Glasses An Introduction

    CERN Document Server

    Jones, Julian

    2012-01-01

    This new work is dedicated to glasses and their variants which can be used as biomaterials to repair diseased and damaged tissues. Bio-glasses are superior to other biomaterials in many applications, such as healing bone by signaling stem cells to become bone cells.   Key features:  First book on biomaterials to focus on bio-glassesEdited by a leading authority on bio-glasses trained by one of its inventors, Dr Larry HenchSupported by the International Commission on Glass (ICG)Authored by members of the ICG Biomedical Glass Committee, with the goal of creating a seamless textb

  1. BioAir: Bio-Inspired Airborne Infrastructure Reconfiguration

    Science.gov (United States)

    2016-01-01

    UAV ) in order to autonomously form and maintain a dynamic communication network. This system draws upon inspirations from biological cell...presents the BioAIR system for autonomous communication , command and control of a swarm of UAVs . The idea is to form a communication network comprised of...deployment, yet maintaining communications should not interfere with the primary tasks of these entities. The BioAIR system was developed to coordinate

  2. Navigating the Bio-Politics of Childhood

    Science.gov (United States)

    Lee, Nick; Motzkau, Johanna

    2011-01-01

    Childhood research has long shared a bio-political terrain with state agencies in which children figure primarily as "human futures". In the 20th century bio-social dualism helped to make that terrain navigable by researchers, but, as life processes increasingly become key sites of bio-political action, bio-social dualism is becoming…

  3. NIH NeuroBioBank

    Data.gov (United States)

    Federal Laboratory Consortium — The NIH NeuroBioBank (NBB), supported by the National Institute of Mental Health, the National Institute of Neurological Disorders and Stroke, and the Eunice Kennedy...

  4. Study on the Difference of Mine Geo-environmental Problem Response to Mineral Resource Exploitation: a Case Study About the Mining Areas in Tongguan and Daliuta of Shaanxi and Fuxin of Liaoning%矿产资源开发中矿山地质环境问题响应差异性研究——以陕西潼关、大柳塔及辽宁阜新矿区为例

    Institute of Scientific and Technical Information of China (English)

    徐友宁; 徐冬寅; 张江华; 陈华清

    2011-01-01

    以陕西潼关、大柳塔及辽宁阜新矿区为例,采用对比分析的方法研究矿产资源开发中矿山地质环境问题差异性响应的主要因素.上述3个矿区矿产资源开发中矿山地质环境问题主要包括:20世纪90年代以前,陕西潼关金矿区是中国矿产资源开发秩序十分混乱的矿区之一,地下开采的采矿废石随意堆排导致了极为严重的矿山泥石流地质灾害及其隐患,"三废"无序排放导致土壤、河水及其底泥的重金属及氰化物污染严重,严重影响人体健康;地处生态环境脆弱带的陕西大柳塔煤矿区,20年大型机械化地下煤炭资源开采导致大面积地面塌陷及其链生的地下水含水层破坏严重,但矿区土地沙漠化程度总体没有呈现加重的趋势,水土环境重金属呈轻度污染;具有百年开发历史的辽宁阜新煤矿区,露天开采使土地生态破坏严重、边坡滑坡灾害频发、土地压占与破坏突出,地下开采引起的地面塌陷对地表建筑物及人居安全影响严重,但相对于金属矿区,该矿区水土环境重金属污染相对轻得多.对比上述3个矿区矿山地质环境问题,得到其差异性响应主要因素:矿产资源种类、原生地质环境条件、开采方式及矿山环境保护意识等.%Taking the mining area in Tongguan and Daliuta of Shaanxi and Fuxin of Liaoning as an example, the difference of mine geo-environmental problem response to mineral resource exploration and its main factors were discussed by the means of the comparative analysis. The main geo-environmental problems caused by mineral resource exploration in the above three mining areas included as follow: before the 1990s, the mineral resource exploration in Tongguan gold mining area of Shaanxi was very confused, a large amount of waste mining rock lead to severe debris flow and risk, the “three wastes" (i. e. waste gas, waste water and waste residues) discharged disorderly and caused serious

  5. Bio-inspired vision

    Science.gov (United States)

    Posch, C.

    2012-01-01

    Nature still outperforms the most powerful computers in routine functions involving perception, sensing and actuation like vision, audition, and motion control, and is, most strikingly, orders of magnitude more energy-efficient than its artificial competitors. The reasons for the superior performance of biological systems are subject to diverse investigations, but it is clear that the form of hardware and the style of computation in nervous systems are fundamentally different from what is used in artificial synchronous information processing systems. Very generally speaking, biological neural systems rely on a large number of relatively simple, slow and unreliable processing elements and obtain performance and robustness from a massively parallel principle of operation and a high level of redundancy where the failure of single elements usually does not induce any observable system performance degradation. In the late 1980`s, Carver Mead demonstrated that silicon VLSI technology can be employed in implementing ``neuromorphic'' circuits that mimic neural functions and fabricating building blocks that work like their biological role models. Neuromorphic systems, as the biological systems they model, are adaptive, fault-tolerant and scalable, and process information using energy-efficient, asynchronous, event-driven methods. In this paper, some basics of neuromorphic electronic engineering and its impact on recent developments in optical sensing and artificial vision are presented. It is demonstrated that bio-inspired vision systems have the potential to outperform conventional, frame-based vision acquisition and processing systems in many application fields and to establish new benchmarks in terms of redundancy suppression/data compression, dynamic range, temporal resolution and power efficiency to realize advanced functionality like 3D vision, object tracking, motor control, visual feedback loops, etc. in real-time. It is argued that future artificial vision systems

  6. Bio-oil fractionation and condensation

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Robert C.; Jones, Samuel T.; Pollard, Anthony

    2017-04-04

    The present invention relates to a method of fractionating bio-oil vapors which involves providing bio-oil vapors comprising bio-oil constituents. The bio-oil vapors are cooled in a first stage which comprises a condenser having passages for the bio-oil separated by a heat conducting wall from passages for a coolant. The coolant in the condenser of the first stage is maintained at a substantially constant temperature, set at a temperature in the range of 75 to 100.degree. C., to condense a first liquid fraction of liquefied bio-oil constituents in the condenser of the first stage. The first liquid fraction of liquified bio-oil constituents from the condenser in the first stage is collected. Also disclosed are steps for subsequently recovering further liquid fractions of liquefied bio-oil constituents. Particular compositions of bio-oil condensation products are also described.

  7. Bio-oil fractionation and condensation

    Science.gov (United States)

    Brown, Robert C; Jones, Samuel T; Pollard, Anthony

    2013-07-02

    A method of fractionating bio-oil vapors which involves providing bio-oil vapors comprising bio-oil constituents is described. The bio-oil vapors are cooled in a first stage which comprises a condenser having passages for the bio-oil separated by a heat conducting wall from passages for a coolant. The coolant in the condenser of the first stage is maintained at a substantially constant temperature, set at a temperature in the range of 75 to 100.degree. C., to condense a first liquid fraction of liquefied bio-oil constituents in the condenser of the first stage. The first liquid fraction of liquified bio-oil constituents from the condenser in the first stage is collected. Also described are steps for subsequently recovering further liquid fractions of liquefied bio-oil constituents. Particular compositions of bio-oil condensation products are also described.

  8. Determination of Carbonyl Functional Groups in Bio-oils by Potentiometric Titration: The Faix Method

    Energy Technology Data Exchange (ETDEWEB)

    Black, Stuart; Ferrell, Jack R.

    2017-01-01

    Carbonyl compounds present in bio-oils are known to be responsible for bio-oil property changes upon storage and during upgrading. Specifically, carbonyls cause an increase in viscosity (often referred to as 'aging') during storage of bio-oils. As such, carbonyl content has previously been used as a method of tracking bio-oil aging and condensation reactions with less variability than viscosity measurements. Additionally, carbonyls are also responsible for coke formation in bio-oil upgrading processes. Given the importance of carbonyls in bio-oils, accurate analytical methods for their quantification are very important for the bio-oil community. Potentiometric titration methods based on carbonyl oximation have long been used for the determination of carbonyl content in pyrolysis bio-oils. Here, we present a modification of the traditional carbonyl oximation procedures that results in less reaction time, smaller sample size, higher precision, and more accurate carbonyl determinations. While traditional carbonyl oximation methods occur at room temperature, the Faix method presented here occurs at an elevated temperature of 80 degrees C.

  9. Determination of Carbonyl Functional Groups in Bio-oils by Potentiometric Titration: The Faix Method.

    Science.gov (United States)

    Black, Stuart; Ferrell, Jack R

    2017-02-07

    Carbonyl compounds present in bio-oils are known to be responsible for bio-oil property changes upon storage and during upgrading. Specifically, carbonyls cause an increase in viscosity (often referred to as 'aging') during storage of bio-oils. As such, carbonyl content has previously been used as a method of tracking bio-oil aging and condensation reactions with less variability than viscosity measurements. Additionally, carbonyls are also responsible for coke formation in bio-oil upgrading processes. Given the importance of carbonyls in bio-oils, accurate analytical methods for their quantification are very important for the bio-oil community. Potentiometric titration methods based on carbonyl oximation have long been used for the determination of carbonyl content in pyrolysis bio-oils. Here, we present a modification of the traditional carbonyl oximation procedures that results in less reaction time, smaller sample size, higher precision, and more accurate carbonyl determinations. While traditional carbonyl oximation methods occur at room temperature, the Faix method presented here occurs at an elevated temperature of 80 °C.

  10. A bio-inspired software for segmenting digital images.

    OpenAIRE

    Díaz Pernil, Daniel; Molina Abril, Helena; Real Jurado, Pedro; Gutiérrez Naranjo, Miguel Ángel

    2010-01-01

    Segmentation in computer vision refers to the process of partitioning a digital image into multiple segments (sets of pixels). It has several features which make it suitable for techniques inspired by nature. It can be parallelized, locally solved and the input data can be easily encoded by bio-inspired representations. In this paper, we present a new software for performing a segmentation of 2D digital images based on Membrane Computing techniques.

  11. Bio-nanopatterning of Surfaces

    Directory of Open Access Journals (Sweden)

    Yeung Chun

    2007-01-01

    Full Text Available AbstractBio-nanopatterning of surfaces is a very active interdisciplinary field of research at the interface between biotechnology and nanotechnology. Precise patterning of biomolecules on surfaces with nanometre resolution has great potential in many medical and biological applications ranging from molecular diagnostics to advanced platforms for fundamental studies of molecular and cell biology. Bio-nanopatterning technology has advanced at a rapid pace in the last few years with a variety of patterning methodologies being developed for immobilising biomolecules such as DNA, peptides, proteins and viruses at the nanoscale on a broad range of substrates. In this review, the status of research and development are described, with particular focus on the recent advances on the use of nanolithographic techniques as tools for biomolecule immobilisation at the nanoscale. Present strengths and weaknesses, as well future challenges on the different nanolithographic bio-nanopatterning approaches are discussed.

  12. Evaluation of Emissions Bio diesel

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Maroto, J. J.; Dorronsoro Arenal, J. L.; Rojas Garcia, E.; Perez Pastor, R.; Garcia Alonso, S.

    2007-09-27

    The generation of energy from vegetal products is one of the possibilities to our reach in order to reduce the atmospheric pollution. Particularly, the use of bio diesel in internal combustion engines can be one of the best options. The finest particles emitted by the combustion engines are easily breathable and on them different substances can be absorbed presumably toxic, between which it is possible to emphasize the polycyclic aromatic hydrocarbons (PAHs), by its demonstrated carcinogen character. In this work, it is studied on the one hand, the characteristics that can present the aerosol of emission in a diesel engine with a maximum power of 97 kW, working without load to 600 rpm, using as combustible mixtures of bio diesel and diesel in different proportions. On the other hand, the evolution that takes place in the concentration of PAHs in emission particles, according to the percentage of bio diesel used in the combustible mixture. (Author) 9 refs.

  13. BioMagResBank.

    NARCIS (Netherlands)

    Ulrich, E.L.; Akutsu, H.; Doreleijers, J.; Harano, Y.; Ioannidis, Y.E.; Lin, J.; Livny, M.; Mading, S.; Maziuk, D.; Miller, Z.; Nakatani, E.; Schulte, C.F.; Tolmie, D.E.; Wenger, R Kent; Yao, H.; Markley, J.L.

    2008-01-01

    The BioMagResBank (BMRB: www.bmrb.wisc.edu) is a repository for experimental and derived data gathered from nuclear magnetic resonance (NMR) spectroscopic studies of biological molecules. BMRB is a partner in the Worldwide Protein Data Bank (wwPDB). The BMRB archive consists of four main data deposi

  14. Library Reference Services.

    Science.gov (United States)

    Miller, Constance; And Others

    1985-01-01

    Seven articles on library reference services highlight reference obsolescence in academic libraries, major studies of unobtrusive reference tests, methods for evaluating reference desk performance, reference interview evaluation, problems of reference desk control, online searching by end users, and reference collection development in…

  15. Optimising the bio-piling of weathered hydrocarbons within a risk management framework

    Energy Technology Data Exchange (ETDEWEB)

    Hough, R.; Brassington, K.; Sinke, A.; Crossley, J.; Paton, G.; Semple, K.; Risdon, G.; Jacobson, Ch.; Daly, P.; Jackman, S.; Lethbridge, G.; Pollard, S. [Cranfield Univ. (United Kingdom)

    2005-07-01

    Thirty years of research into petroleum microbiology and bio-remediation have bypassed an important observation - that many hydrocarbon contaminated sites posing potential risks to human health harbour weathered, 'mid-distillate' or heavy oils rather than 'fresh product'. Ex-situ bio-piling is an important technology for treating soils contaminated with weathered hydrocarbons. However, its performance continues to be represented by reference to reductions in the hydrocarbon 'load' in the soils being treated, rather than reductions in the risks posed by the hydrocarbon contamination. The absence of 'risk' from the vocabulary of many operators and remediation projects reduces stakeholder (regulatory, investor, landowner, and public) confidence in remediation technologies, and subsequently limits the market potential of these technologies. Stakeholder confidence in the bio-piling of weathered hydrocarbons may be improved by demonstrating process optimisation within a validated risk management framework. To address these issues, a consortium led by Cranfield University's Integrated Waste Management Centre has secured funding from the UK Government's Bio-remediation LINK programme. Project PROMISE (involving BP, SecondSite Regeneration Ltd., Dew Remediation Ltd., TES Bretby (Mowlem Group), technology translators PERA, and academics from Aberdeen, Cranfield and Lancaster Universities) aims to improve market confidence in bio-piling by demonstrating how this treatment may be applied within a risk management context. For weathered hydrocarbons in particular, the underpinning scientific components of process control, waste diagnostics, environmental fate modelling, and risk assessment have yet to be fully integrated to allow bio-piling projects to be verified with improved confidence. The Joint Research Council Review of Bio-remediation recognised this in calling explicitly for the positioning of bio-remediation within a

  16. Bio-batteries and bio-fuel cells: leveraging on electronic charge transfer proteins.

    Science.gov (United States)

    Kannan, A M; Renugopalakrishnan, V; Filipek, S; Li, P; Audette, G F; Munukutla, L

    2009-03-01

    Bio-fuel cells are alternative energy devises based on bio-electrocatalysis of natural substrates by enzymes or microorganisms. Here we review bio-fuel cells and bio-batteries based on the recent literature. In general, the bio-fuel cells are classified based on the type of electron transfer; mediated electron transfer and direct electron transfer or electronic charge transfer (ECT). The ECT of the bio-fuel cells is critically reviewed and a variety of possible applications are considered. The technical challenges of the bio-fuel cells, like bioelectrocatalysis, immobilization of bioelectrocatalysts, protein denaturation etc. are highlighted and future research directions are discussed leveraging on the use of electron charge transfer proteins. In addition, the packaging aspects of the bio-fuel cells are also analyzed and the found that relatively little work has been done in the engineering development of bio-fuel cells.

  17. Autothermal reforming of palm empty fruit bunch bio-oil: thermodynamic modelling

    Directory of Open Access Journals (Sweden)

    Lifita N. Tande

    2016-01-01

    Full Text Available This work focuses on thermodynamic analysis of the autothermal reforming of palm empty fruit bunch (PEFB bio-oil for the production of hydrogen and syngas. PEFB bio-oil composition was simulated using bio-oil surrogates generated from a mixture of acetic acid, phenol, levoglucosan, palmitic acid and furfural. A sensitivity analysis revealed that the hydrogen and syngas yields were not sensitive to actual bio-oil composition, but were determined by a good match of molar elemental composition between real bio-oil and surrogate mixture. The maximum hydrogen yield obtained under constant reaction enthalpy and pressure was about 12 wt% at S/C = 1 and increased to about 18 wt% at S/C = 4; both yields occurring at equivalence ratio Φ of 0.31. The possibility of generating syngas with varying H2 and CO content using autothermal reforming was analysed and application of this process to fuel cells and Fischer-Tropsch synthesis is discussed. Using a novel simple modelling methodology, reaction mechanisms were proposed which were able to account for equilibrium product distribution. It was evident that different combinations of reactions could be used to obtain the same equilibrium product concentrations. One proposed reaction mechanism, referred to as the ‘partial oxidation based mechanism’ involved the partial oxidation reaction of the bio-oil to produce hydrogen, with the extent of steam reforming and water gas shift reactions varying depending on the amount of oxygen used. Another proposed mechanism, referred to as the ‘complete oxidation based mechanism’ was represented by thermal decomposition of about 30% of bio-oil and hydrogen production obtained by decomposition, steam reforming, water gas shift and carbon gasification reactions. The importance of these mechanisms in assisting in the eventual choice of catalyst to be used in a real ATR of PEFB bio-oil process was discussed.

  18. Types for BioAmbients

    Directory of Open Access Journals (Sweden)

    Sara Capecchi

    2010-02-01

    Full Text Available The BioAmbients calculus is a process algebra suitable for representing compartmentalization, molecular localization and movements between compartments. In this paper we enrich this calculus with a static type system classifying each ambient with group types specifying the kind of compartments in which the ambient can stay. The type system ensures that, in a well-typed process, ambients cannot be nested in a way that violates the type hierarchy. Exploiting the information given by the group types, we also extend the operational semantics of BioAmbients with rules signalling errors that may derive from undesired ambients' moves (i.e. merging incompatible tissues. Thus, the signal of errors can help the modeller to detect and locate unwanted situations that may arise in a biological system, and give practical hints on how to avoid the undesired behaviour.

  19. Types for BioAmbients

    CERN Document Server

    Capecchi, Sara; 10.4204/EPTCS.19.7

    2010-01-01

    The BioAmbients calculus is a process algebra suitable for representing compartmentalization, molecular localization and movements between compartments. In this paper we enrich this calculus with a static type system classifying each ambient with group types specifying the kind of compartments in which the ambient can stay. The type system ensures that, in a well-typed process, ambients cannot be nested in a way that violates the type hierarchy. Exploiting the information given by the group types, we also extend the operational semantics of BioAmbients with rules signalling errors that may derive from undesired ambients' moves (i.e. merging incompatible tissues). Thus, the signal of errors can help the modeller to detect and locate unwanted situations that may arise in a biological system, and give practical hints on how to avoid the undesired behaviour.

  20. Bioética Bioética Boethics

    OpenAIRE

    Cássia Regina Rodrigues Nunes; Amauri Porto Nunes

    2004-01-01

    A bioética é um novo campo de conhecimento e uma corrente de pensamento que vem se desenvolvendo amplamente no Brasil, principalmente a partir da década de 90. Nesse artigo buscamos contextualizar o seu surgimento, justificando a necessidade da criação desse neologismo, uma vez que a ética estava de certo modo esquecida, em relação à técnica, restringindo-se apenas à ética profissional. Hoje nos deparamos com uma ampla gama de produções nessa área que ajudam a nortear nossa ação enquanto cida...

  1. Bioética Bioética Boethics

    Directory of Open Access Journals (Sweden)

    Cássia Regina Rodrigues Nunes

    2004-10-01

    Full Text Available A bioética é um novo campo de conhecimento e uma corrente de pensamento que vem se desenvolvendo amplamente no Brasil, principalmente a partir da década de 90. Nesse artigo buscamos contextualizar o seu surgimento, justificando a necessidade da criação desse neologismo, uma vez que a ética estava de certo modo esquecida, em relação à técnica, restringindo-se apenas à ética profissional. Hoje nos deparamos com uma ampla gama de produções nessa área que ajudam a nortear nossa ação enquanto cidadãos que buscam qualidade de vida e a preservação da vida no planeta. A bioética, no entanto, preocupa-se com o modo de ser: pensamento-julgamento-ação, em relação aos seres humanos entre si e com a natureza.La bioética es un nuevo campo de conocimiento y una corriente del pensamiento que está en pleno desarrollo en Brasil, principalmente a partir de la década del 90. En este artículo explicamos el contexto de su surgimiento, justificando la necesidad de la creación de este neologismo, una vez que la ética estaba de una cierta manera relegada, con relación a la técnica, limitada apenas a la ética profesional. Hoy nosotros notamos una amplia gama de producciones en esta área que nos ayudan a orientar nuestras acciones como ciudadanos que buscan la calidad de vida y la preservación de la vida en el planeta. La bioética, sin embargo, se preocupa con el modo de ser: pensamiento-juicio-acción, con relación a los seres humanos entre sí y con la naturaleza.Bioethics is a new field of knowledge and a current of thought that has been largely developing in Brazil, especially since the Nineties. In this article, we try to contextualize its inception by justifying the need to create such a neologism, since ethics was somewhat forgotten, in relation to the technique, being restricted to professional ethics. We are nowadays faced with a wide scope of works in this area that help guide our action as citizens who want quality of life

  2. The Bio* toolkits--a brief overview.

    Science.gov (United States)

    Mangalam, Harry

    2002-09-01

    Bioinformatics research is often difficult to do with commercial software. The Open Source BioPerl, BioPython and Biojava projects provide toolkits with multiple functionality that make it easier to create customised pipelines or analysis. This review briefly compares the quirks of the underlying languages and the functionality, documentation, utility and relative advantages of the Bio counterparts, particularly from the point of view of the beginning biologist programmer.

  3. Bio-logic设备优点

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ 世界第一台数字脑电图是Bio-logic厂家设计并生产 世界第一台数字视频脑电图是Bio-logic厂家设计并生产 在中国市场"癫痫刀"这个概念,也为Bio-logic厂家所推广 在美国市场,脑电图仪器的行业标准是以Bio-logic产品为基准定制的.

  4. Bio-Matematik ved Roskilde Universitet

    DEFF Research Database (Denmark)

    Ottesen, Johnny T.

    2010-01-01

    Ved Institut for Natur, Systemer og Modeller ved Roskilde Universitet finder man en velkonsolideret gruppe af forskere, BioMath-gruppen, der beskæftiger sig med Bio-Matematik og Bio-Medicinsk Modellering. Faktisk startede BioMath-gruppen på det tidligere Institut for Studiet af Matematik og Fysik...... pumper; 3) Endokrin fysiologi; 4) Type 1 og type 2 diabetes; 5) Populationsdynamik og sygdomsspredning; og 6) Parameterestimering i patient-specifikke modeller.   Udover overnævnte modelleringsområder har vi ved instituttet en stærk tradition for at beskæftige os med metaaspekter af modellering, f...

  5. Authentifizierung von Bio-Milch im Labor

    OpenAIRE

    2008-01-01

    In Deutschland ist die Nachfrage nach Bio-Lebensmitteln in den letzten Jahren stetig gestiegen. So erhöhte sich der Absatz von Bio-Trinkmilch in 2007 im Vergleich zum Vorjahr erneut kräftig um 34 Prozent (ZMP, Bonn) und der Bio-Anteil beträgt inzwischen bei Frischmilch knapp elf Prozent. Aufgrund sporadisch resultierender Lieferengpässe bei Bio-Milch sowie der vorhandenen Handelspreisdifferenz besteht zunehmend ein potenzielles Risiko der Falschdeklaration konventionell erzeugter Milch als Bi...

  6. Virtual reference services

    OpenAIRE

    Márdero Arellano, Miguel Ángel

    2001-01-01

    Analysis of virtual reference services, their standandars and new technologies that have changed the tradicional practice at the library’s reference desk. Major American virtual reference services initiatives and their characteristics are described.

  7. Bio-inspired nanomaterials and their applications as antimicrobial agents

    Directory of Open Access Journals (Sweden)

    Smita Sachin Zinjarde

    2012-01-01

    Full Text Available In the recent decades, the interdisciplinary field of nanotechnology has expanded extensively. A variety of nanoparticles (NPs have been used for a number of specialized applications. In this era facing a major problem of microorganisms developing antibiotic resistance, NPs are a lucrative option. Most physical and chemical processes of NP synthesis are associated with drawbacks and bio-inspired NPs have now become popular. This review summarizes the recent developments on the biosynthesis, characterization, and applications of NPs with particular reference to their use as antimicrobial agents. Reviewed here is the synthesis of gold and silver NPs (AgNPs by a variety of biological forms and biomolecules as well as their effectiveness toward different fungal and bacterial pathogens. The use of gold NPs (bio-inspired by plants, fungi, and bacteria and AgNPs, synthesized by carbohydrates (of plant, animal, and microbial origin, plant parts (bark, callus, leaves, peels, and tubers, fungi, and bacteria have been highlighted. In addition, the use of zinc oxide NPs (although not bio-inspired as novel antimicrobial agents have also been discussed.

  8. Modeling the Kinetics of Deactivation of Catalysts during the Upgrading of Bio-Oil

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Robert S.; Olarte, Mariefel V.; Wang, Huamin

    2015-01-25

    The fouling of catalysts for the upgrading of bio-oils appears to be very different from the fouling of catalysts for the hydroprocessing of petroleum-derived streams. There are two reasons for the differences: a) bio-oil contains polarizable components and phases that can stabilize reaction intermediates exhibiting charge separation and b) bio-oil components contain functional groups that contain O, notably carbonyls (>C=O). Aldol condensation of carbonyls affords very different pathways for the production of oligomeric, refractory deposits than does dehydrogenation/polymerization of petroleum-derived hydrocarbons. Colloquially, we refer to the bio-oil derived deposits as “gunk” to discriminate them from coke, the carbonaceous deposits encountered in petroleum refining. Classical gelation, appears to be a suitable model for the “gunking” reaction. Our work has helped explain the temperature range at which bio-oil should be pre-processed (“stabilized”) to confer longer lifetimes on the catalysts used for more severe processing. Stochastic modeling (kinetic Monte Carlo simulations) appears suitable to capture the rates of oligomerization of bio-oil. This work was supported by the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Bioenergy Technologies Office. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle.

  9. The greenhouse gas and energy balance of different treatment concepts for bio-waste.

    Science.gov (United States)

    Ortner, Maria E; Müller, Wolfgang; Bockreis, Anke

    2013-10-01

    The greenhouse gas (GHG) and energy performance of bio-waste treatment plants been investigated for three characteristic bio-waste treatment concepts: composting; biological drying for the production of biomass fuel fractions; and anaerobic digestion. Compared with other studies about the environmental impacts of bio-waste management, this study focused on the direct comparison of the latest process concepts and state-of-the-art emission control measures. To enable a comparison, the mass balance and products were modelled for all process concepts assuming the same bio-waste amounts and properties. In addition, the value of compost as a soil improver was included in the evaluation, using straw as a reference system. This aspect has rarely been accounted for in other studies. The study is based on data from operational facilities combined with literature data. The results show that all three concepts contribute to a reduction of GHG emissions and show a positive balance for cumulated energy demand. However, in contrast to other studies, the advantage of anaerobic digestion compared with composting is smaller as a result of accounting for the soil improving properties of compost. Still, anaerobic digestion is the environmentally superior solution. The results are intended to inform decision makers about the relevant aspects of bio-waste treatment regarding the environmental impacts of different bio-waste management strategies.

  10. Profitable use of bio fuels

    Energy Technology Data Exchange (ETDEWEB)

    Ekelund, Mats [Strateco Develoment AB, Vega (Sweden)], e-mail: mats.e@strateco.se

    2012-11-01

    Traditionally, the transportation industry has been opposed to any new legislation and when rather stringent emission legislation occurred, they objected just as they did when new fuels came on the agenda. On very short notice, Taxi Stockholm lost 20 % of their business when the County decided to award all public transportation contracts to a competitor. It was time to change plans instead of complaining and to take advantage of new opportunities - 'The first mover advantage'. Making the use of bio fuels into a profitable business takes a change of a standard 'business model' to do and there is still much room others to do the same. With a new CEO, an active marketing department and active individuals among the Board of Directors, Taxi Stockholm massaged a strategy where more business and private customers would be attracted by justifying the green leaf on every cab. All initiatives were publically announced and Taxi Stockholm broke new ice by putting a ban on spike tires - a decision which the vice Mayor made part of her ruling for the whole city. The Ban on gasoline and diesel cars were announced and such a statement attracted business from a loyalty point of view and from companies that had a 'Green Transport Policy' to live up to. Taxi Stockholm has seen growth and profitability grow since and credit the green policy on bio fuels such as bio gas and ethanol for most of it. Preem, Stockholm Transit, Volvo and other market driven operators have all seen markets grow from green initiatives.

  11. E-bioética

    OpenAIRE

    López de la Vieja de la Torre, Mª Teresa

    2013-01-01

    In bioethics, the use of new technology facilitates access to information on issues affecting the beginning and end of life, as well as for research. However, the transparency and openness of information does not guarantee the participation and responsibility in decision-making. En Bioética, el uso de las nuevas tecnologías facilita el acceso a información sobre cuestiones que afectan al principio y al fin de la vida, así como a la investigación. Sin embargo, la transparencia y la apertura...

  12. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  13. Solitary BioY proteins mediate biotin transport into recombinant Escherichia coli.

    Science.gov (United States)

    Finkenwirth, Friedrich; Kirsch, Franziska; Eitinger, Thomas

    2013-09-01

    Energy-coupling factor (ECF) transporters form a large group of vitamin uptake systems in prokaryotes. They are composed of highly diverse, substrate-specific, transmembrane proteins (S units), a ubiquitous transmembrane protein (T unit), and homo- or hetero-oligomeric ABC ATPases. Biotin transporters represent a special case of ECF-type systems. The majority of the biotin-specific S units (BioY) is known or predicted to interact with T units and ABC ATPases. About one-third of BioY proteins, however, are encoded in organisms lacking any recognizable T unit. This finding raises the question of whether these BioYs function as transporters in a solitary state, a feature ascribed to certain BioYs in the past. To address this question in living cells, an Escherichia coli K-12 derivative deficient in biotin synthesis and devoid of its endogenous high-affinity biotin transporter was constructed as a reference strain. This organism is particularly suited for this purpose because components of ECF transporters do not naturally occur in E. coli K-12. The double mutant was viable in media containing either high levels of biotin or a precursor of the downstream biosynthetic path. Importantly, it was nonviable on trace levels of biotin. Eight solitary bioY genes of proteobacterial origin were individually expressed in the reference strain. Each of the BioYs conferred biotin uptake activity on the recombinants, which was inferred from uptake assays with [(3)H]biotin and growth of the cells on trace levels of biotin. The results underscore that solitary BioY transports biotin across the cytoplasmic membrane.

  14. Bioelectronic platforms for optimal bio-anode of bio-electrochemical systems: From nano- to macro scopes.

    Science.gov (United States)

    Kim, Bongkyu; An, Junyeong; Fapyane, Deby; Chang, In Seop

    2015-11-01

    The current trend of bio-electrochemical systems is to improve strategies related to their applicability and potential for scaling-up. To date, literature has suggested strategies, but the proposal of correlations between each research field remains insufficient. This review paper provides a correlation based on platform techniques, referred to as bio-electronics platforms (BEPs). These BEPs consist of three platforms divided by scope scale: nano-, micro-, and macro-BEPs. In the nano-BEP, several types of electron transfer mechanisms used by electrochemically active bacteria are discussed. In the micro-BEP, factors affecting the formation of conductive biofilms and transport of electrons in the conductive biofilm are investigated. In the macro-BEP, electrodes and separators in bio-anode are debated in terms of real applications, and a scale-up strategy is discussed. Overall, the challenges of each BEP are highlighted, and potential solutions are suggested. In addition, future research directions are provided and research ideas proposed to develop research interest.

  15. Bio-oxidation of arsenopyrite

    Institute of Scientific and Technical Information of China (English)

    JIANG Tao; LI Qian; YANG Yong-bin; LI Guang-hui; QIU Guan-zhou

    2008-01-01

    Oxidation of arsenopyrite with Acidithiobacillus ferrooxidans was studied.The electrochemical results show that arsenopyrite is firstly oxidized to As2S2 at the potential of 0.2-0.3 V (vs SHE) and As2S2 covers the electrode and retards the process continuously.While at higher potential over 0.3 V (vs SHE),As2S2 is oxidized to H3AsO3,and H3AsO3 is then oxidized to H3AsO4 at 0.8 V (vs SHE).The leaching results show that the addition of FeS2 can promote the oxidation of As3+ to As5+ and increase the activity of the bacteria.The best bio-oxidation technical parameters are the initial pH of 1.8-2.0,particle sizes less than 0.074 mm,temperature in the range of 25-30 ℃ and rotating speed of the orbital incubator of 100-160 r/min.The results provide theoretical and technological supports of bio-oxidation arsenopyrite for pretreating refractory arsenic gold ores.

  16. A terracotta bio-battery.

    Science.gov (United States)

    Ajayi, Folusho F; Weigele, Peter R

    2012-07-01

    Terracotta pots were converted into simple, single chamber, air-cathode bio-batteries. This bio-battery design used a graphite-felt anode and a conductive graphite coating without added catalyst on the exterior as a cathode. Bacteria enriched from river sediment served as the anode catalyst. These batteries gave an average OCV of 0.56 V ± 0.02, a Coulombic efficiency of 21 ± 5%, and a peak power of 1.06 mW ± 0.01(33.13 mW/m(2)). Stable current was also produced when the batteries were operated with hay extract in salt solution. The bacterial community on the anode of the batteries was tested for air tolerance and desiccation resistance over a period ranging from 2 days to 2 weeks. The results showed that the anode community could survive complete drying of the electrolyte for several days. These data support the further development of this technology as a potential power source for LED-based lighting in off-grid, rural communities.

  17. Israel Marine Bio-geographic Database (ISRAMAR-BIO)

    Science.gov (United States)

    Greengrass, Eyal; Krivenko, Yevgeniya; Ozer, Tal; Ben Yosef, Dafna; Tom, Moshe; Gertman, Isaac

    2015-04-01

    The knowledge of the space/time variations of species is the basis for any ecological investigations. While historical observations containing integral concentrations of biological parameters (chlorophyll, abundance, biomass…) are organized partly in ISRAMAR Cast Database, the taxon-specific data collected in Israel has not been sufficiently organized. This has been hindered by the lack of standards, variability of methods and complexity of biological data formalization. The ISRAMAR-BIO DB was developed to store various types of historical and future available information related to marine species observations and related metadata. Currently the DB allows to store biological data acquired by the following sampling devices such as: van veer grab, box corer, sampling bottles, nets (plankton, trawls and fish), quadrates, and cameras. The DB's logical unit is information regarding a specimen (taxa name, barcode, image), related attributes (abundance, size, age, contaminants…), habitat description, sampling device and method, time and space of sampling, responsible organization and scientist, source of information (cruise, project and publication). The following standardization of specimen and attributes naming were implemented: Taxonomy according to World Register of Marine Species (WoRMS: http://www.marinespecies.org). Habitat description according to Coastal and Marine Ecological Classification Standards (CMECS: http://www.cmecscatalog.org) Parameter name; Unit; Device name; Developmental stage; Institution name; Country name; Marine region according to SeaDataNet Vocabularies (http://www.seadatanet.org/Standards-Software/Common-Vocabularies). This system supports two types of data submission procedures, which support the above stated data structure. The first is a downloadable excel file with drop-down fields based on the ISRAMAR-BIO vocabularies. The file is filled and uploaded online by the data contributor. Alternatively, the same dataset can be assembled by

  18. Bio-Conjugates for Nanoscale Applications

    DEFF Research Database (Denmark)

    Villadsen, Klaus

    Bio-conjugates for Nanoscale Applications is the title of this thesis, which covers three different projects in chemical bio-conjugation research, namely synthesis and applications of: Lipidated fluorescent peptides, carbohydrate oxime-azide linkers and N-aryl O-R2 oxyamine derivatives. Lipidated...

  19. Biosecurity--The Bio-Link Project.

    Science.gov (United States)

    Johnson, Elaine A.

    2002-01-01

    Describes Bio-Link, the Advanced Technological Education (ATE) Center for Biotechnology established with funding from the National Science Foundation (NSF). Reports that Bio-Link, headquartered at City College of San Francisco, has created a national network and resource base for community colleges, industry, and others interested in biotechnology…

  20. Microorganisms interacting in a bio filter

    Energy Technology Data Exchange (ETDEWEB)

    Barba-Avila, M. D.; Flores-Tene, F. J.; Moreno-Terrazas, R.; Ramirez-Lopez, E. M.

    2009-07-01

    Biofilm microorganisms developed on a bio filter support media allow the metabolism of volatile organic compounds (VOCs) to carbon dioxide and water. VOCs are present in polluted gaseous streams for varied industrial activities. The main objective of this study was to identify the microorganisms present in the biofilm developed on a bio filter support media using molecular biology techniques. (Author)

  1. Core ethical values: EuropaBio.

    Science.gov (United States)

    2002-01-01

    EuropaBio, the European Association for BioIndustries, represents 40 companies operating world wide and 14 national association (totaling around 600 small and medium-sized enterprises) involved in the research, development, testing, manufacturing, marketing, sales and distribution of biotechnology products and services in the fields of healthcare, agriculture, food and the environment.

  2. Autonomic networking-on-chip bio-inspired specification, development, and verification

    CERN Document Server

    Cong-Vinh, Phan

    2011-01-01

    Despite the growing mainstream importance and unique advantages of autonomic networking-on-chip (ANoC) technology, Autonomic Networking-On-Chip: Bio-Inspired Specification, Development, and Verification is among the first books to evaluate research results on formalizing this emerging NoC paradigm, which was inspired by the human nervous system. The FIRST Book to Assess Research Results, Opportunities, & Trends in ""BioChipNets"" The third book in the Embedded Multi-Core Systems series from CRC Press, this is an advanced technical guide and reference composed of contributions from prominent re

  3. 2002 reference document; Document de reference 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  4. Switchable bio-inspired adhesives

    Science.gov (United States)

    Kroner, Elmar

    2015-03-01

    Geckos have astonishing climbing abilities. They can adhere to almost any surface and can run on walls and even stick to ceilings. The extraordinary adhesion performance is caused by a combination of a complex surface pattern on their toes and the biomechanics of its movement. These biological dry adhesives have been intensely investigated during recent years because of the unique combination of adhesive properties. They provide high adhesion, allow for easy detachment, can be removed residue-free, and have self-cleaning properties. Many aspects have been successfully mimicked, leading to artificial, bio-inspired, patterned dry adhesives, and were addressed and in some aspects they even outperform the adhesion capabilities of geckos. However, designing artificial patterned adhesion systems with switchable adhesion remains a big challenge; the gecko's adhesion system is based on a complex hierarchical surface structure and on advanced biomechanics, which are both difficult to mimic. In this paper, two approaches are presented to achieve switchable adhesion. The first approach is based on a patterned polydimethylsiloxane (PDMS) polymer, where adhesion can be switched on and off by applying a low and a high compressive preload. The switch in adhesion is caused by a reversible mechanical instability of the adhesive silicone structures. The second approach is based on a composite material consisting of a Nickel- Titanium (NiTi) shape memory alloy and a patterned adhesive PDMS layer. The NiTi alloy is trained to change its surface topography as a function of temperature, which results in a change of the contact area and of alignment of the adhesive pattern towards a substrate, leading to switchable adhesion. These examples show that the unique properties of bio-inspired adhesives can be greatly improved by new concepts such as mechanical instability or by the use of active materials which react to external stimuli.

  5. BIO::Phylo-phyloinformatic analysis using perl

    Directory of Open Access Journals (Sweden)

    Hartmann Klaas

    2011-02-01

    Full Text Available Abstract Background Phyloinformatic analyses involve large amounts of data and metadata of complex structure. Collecting, processing, analyzing, visualizing and summarizing these data and metadata should be done in steps that can be automated and reproduced. This requires flexible, modular toolkits that can represent, manipulate and persist phylogenetic data and metadata as objects with programmable interfaces. Results This paper presents Bio::Phylo, a Perl5 toolkit for phyloinformatic analysis. It implements classes and methods that are compatible with the well-known BioPerl toolkit, but is independent from it (making it easy to install and features a richer API and a data model that is better able to manage the complex relationships between different fundamental data and metadata objects in phylogenetics. It supports commonly used file formats for phylogenetic data including the novel NeXML standard, which allows rich annotations of phylogenetic data to be stored and shared. Bio::Phylo can interact with BioPerl, thereby giving access to the file formats that BioPerl supports. Many methods for data simulation, transformation and manipulation, the analysis of tree shape, and tree visualization are provided. Conclusions Bio::Phylo is composed of 59 richly documented Perl5 modules. It has been deployed successfully on a variety of computer architectures (including various Linux distributions, Mac OS X versions, Windows, Cygwin and UNIX-like systems. It is available as open source (GPL software from http://search.cpan.org/dist/Bio-Phylo

  6. Structural and physico-mechanical characterization of bio-cellulose produced by a cell-free system.

    Science.gov (United States)

    Ullah, Muhammad Wajid; Ul-Islam, Mazhar; Khan, Shaukat; Kim, Yeji; Park, Joong Kon

    2016-01-20

    This study was aimed to characterize the structural and physico-mechanical properties of bio-cellulose produced through cell-free system. Fourier transform-infrared spectrum illustrated exact matching of structural peaks with microbial cellulose, used as reference. Field-emission scanning electron microscopy revealed that fibrils of bio-cellulose were thicker and more compact than microbial cellulose. The specific positions of peaks in the X-ray diffraction and nuclear magnetic resonance spectra indicated that bio-cellulose possessed cellulose II polymorphic structure. Bio-cellulose presented superior physico-mechanical properties than microbial cellulose. The water holding capacity of bio-cellulose and microbial cellulose were found to be 188.6 ± 5.41 and 167.4 ± 4.32 times their dry-weights, respectively. Tensile strengths and degradation temperature of bio-cellulose were 17.63 MPa and 352 °C, respectively compared to 14.71 MPa and 327 °C of microbial cellulose. Overall, the results indicated successful synthesis and superior properties of bio-cellulose that advocate its effectiveness for various applications.

  7. BioXSD: the common data-exchange format for everyday bioinformatics web services

    DEFF Research Database (Denmark)

    Kalas, M.; Puntervoll, P.; Joseph, A.;

    2010-01-01

    Motivation: The world-wide community of life scientists has access to a large number of public bioinformatics databases and tools, which are developed and deployed using diverse technologies and designs. More and more of the resources offer programmatic web-service interface. However, efficient use...... and defines syntax for biological sequences, sequence annotations, alignments and references to resources. We have adapted a set of web services to use BioXSD as the input and output format, and implemented a test-case workflow. This demonstrates that the approach is feasible and provides smooth...... interoperability. Semantics for BioXSD is provided by annotation with the EDAM ontology. We discuss in a separate section how BioXSD relates to other initiatives and approaches, including existing standards and the Semantic Web....

  8. Genetics Home Reference

    Science.gov (United States)

    Skip Navigation Bar Home Current Issue Past Issues Genetics Home Reference Past Issues / Spring 2007 Table of ... of this page please turn Javascript on. The Genetics Home Reference (GHR) Web site — ghr.nlm.nih. ...

  9. CMS Statistics Reference Booklet

    Data.gov (United States)

    U.S. Department of Health & Human Services — The annual CMS Statistics reference booklet provides a quick reference for summary information about health expenditures and the Medicare and Medicaid health...

  10. Best Reference Sources 2001.

    Science.gov (United States)

    Coutts, Brian; McConnell, Tamara

    2002-01-01

    Presents an annotated list of the best reference materials published in 2001. Discusses activity in the reference publishing industry; costs; and lists print materials, Web sites, databases, and CD-ROMs. (LRW)

  11. Bio-inspired computation in telecommunications

    CERN Document Server

    Yang, Xin-She; Ting, TO

    2015-01-01

    Bio-inspired computation, especially those based on swarm intelligence, has become increasingly popular in the last decade. Bio-Inspired Computation in Telecommunications reviews the latest developments in bio-inspired computation from both theory and application as they relate to telecommunications and image processing, providing a complete resource that analyzes and discusses the latest and future trends in research directions. Written by recognized experts, this is a must-have guide for researchers, telecommunication engineers, computer scientists and PhD students.

  12. Spider Silk: Mother Nature's Bio-Superlens

    Science.gov (United States)

    Monks, James N.; Yan, Bing; Hawkins, Nicholas; Vollrath, Fritz; Wang, Zengbo

    2016-09-01

    This paper demonstrates a possible new microfiber bio near field lens that uses minor ampullate spider silk,spun from the Nephila edulis spider, to create a real time image of a surface using near field optical techniques. The microfiber bio lens is the world's first natural superlens created by exploring biological materials. The resolution of the surface image overcomes the diffraction limit, with the ability to resolve patterns at 100 nm under a standard white light source in reflection mode. This resolution offers further developments in superlens technology and paves the way for new bio optics.

  13. Small Molecule-BIO Accelerates and Enhances Marrow-Derived Mesenchymal Stem Cell in Vitro Chondrogenesis

    Directory of Open Access Journals (Sweden)

    Mohamadreza Baghaban Eslaminejad

    2014-03-01

    Full Text Available Background: Hyaline cartilage defects exhibit a major challenge in the field of orthopedic surgery owing to its limited repair capacity. On the other hand, mesenchymal stem cells (MSCs are regarded as potent cells with a property of cartilage regeneration. We aimed to optimize marrow-derived MSC chondrogenic culture using a small bioactive molecule referred to as BIO. Methods: MSCs from the marrow of NMRI mice were extracted, culture-expanded, and characterized. Micro-mass culture was then established for chondrogenic differentiation (control group. The cultures of MSC in chondrogenic medium supplemented with 0.01, 0.05, 0.1, and 1 µM BIO were taken as the experimental groups. Cartilage differentiation was examined by both histological sections and real-time PCR for Sox9, aggrecan, and collagen II at different time points. Moreover, the involvement of the Wnt pathway was investigated. Results: Based on histological sections, there was seemingly more intense metachromatic matrix produced in the cultures with 0.01 µM BIO. In this experimental group, cartilage-specific genes tended to be upregulated at day 14 compared to day 21 of the control group, indicating the accelerating effect of BIO on cartilage differentiation. Overall, there was statistically a significant increase (P=0.01 in the expression level of cartilage-specific genes in cultures with 0.01 µM BIO (enhancing effects. These upregulations appeared to be mediated through the Wnt pathway evident from the significant upregulation of T-cell factor and beta-catenin molecules (P=0.01. Conclusion: Taken together, BIO at 0.01 µM could accelerate and enhance in vitro chondrogenesis of mouse marrow-derived MSCs. Please cite this article as: Baghaban Eslaminejad MR, Fallah N. Small Molecule-BIO Accelerates and Enhances Marrow-Derived Mesenchymal Stem Cell in Vitro Chondrogenesis. Iran J Med Sci. 2014;39(2:107-116.

  14. Herbal reference standards.

    Science.gov (United States)

    Schwarz, Michael; Klier, Bernhard; Sievers, Hartwig

    2009-06-01

    This review describes the current definitions and regulatory requirements that apply to reference standards that are used to analyse herbal products. It also describes and discusses the current use of reference substances and reference extracts in the European and United States pharmacopoeias.

  15. Cognitive bio-radar: The natural evolution of bio-signals measurement.

    Science.gov (United States)

    Malafaia, Daniel; Oliveira, Beatriz; Ferreira, Pedro; Varum, Tiago; Vieira, José; Tomé, Ana

    2016-10-01

    In this article we discuss a novel approach to Bio-Radar, contactless measurement of bio-signals, called Cognitive Bio-Radar. This new approach implements the Bio-Radar in a Software Defined Radio (SDR) platform in order to obtain awareness of the environment where it operates. Due to this, the Cognitive Bio-Radar can adapt to its surroundings in order to have an intelligent usage of the radio frequency spectrum to improve its performance. In order to study the feasibility of such implementation, a SDR based Bio-Radar testbench was developed and evaluated. The prototype is shown to be able to acquire the heartbeat activity and the respiratory effort. The acquired data is compared with the acquisitions from a Biopac research data acquisition system, showing coherent results for both heartbeat and breathing rate.

  16. Nano-Electronics and Bio-Electronics

    Science.gov (United States)

    Srivastava, Deepak; Kwak, Dochan (Technical Monitor)

    2001-01-01

    Viewgraph presentation on Nano-Electronics and Bio-Electronics is discussed. Topics discussed include: NASA Ames nanotechnology program, Potential Carbon Nanotube (CNT) application, CNT synthesis,Computational Nanotechnology, and protein nanotubes.

  17. Wireless MEMs BioSensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Crossfield is proposing to develop a low cost, single chip plant bio-monitor using an embedded MEMs based infrared (IR) spectroscopy gas sensor for carbon dioxide...

  18. Negated bio-events: analysis and identification

    Directory of Open Access Journals (Sweden)

    Nawaz Raheel

    2013-01-01

    Full Text Available Abstract Background Negation occurs frequently in scientific literature, especially in biomedical literature. It has previously been reported that around 13% of sentences found in biomedical research articles contain negation. Historically, the main motivation for identifying negated events has been to ensure their exclusion from lists of extracted interactions. However, recently, there has been a growing interest in negative results, which has resulted in negation detection being identified as a key challenge in biomedical relation extraction. In this article, we focus on the problem of identifying negated bio-events, given gold standard event annotations. Results We have conducted a detailed analysis of three open access bio-event corpora containing negation information (i.e., GENIA Event, BioInfer and BioNLP’09 ST, and have identified the main types of negated bio-events. We have analysed the key aspects of a machine learning solution to the problem of detecting negated events, including selection of negation cues, feature engineering and the choice of learning algorithm. Combining the best solutions for each aspect of the problem, we propose a novel framework for the identification of negated bio-events. We have evaluated our system on each of the three open access corpora mentioned above. The performance of the system significantly surpasses the best results previously reported on the BioNLP’09 ST corpus, and achieves even better results on the GENIA Event and BioInfer corpora, both of which contain more varied and complex events. Conclusions Recently, in the field of biomedical text mining, the development and enhancement of event-based systems has received significant interest. The ability to identify negated events is a key performance element for these systems. We have conducted the first detailed study on the analysis and identification of negated bio-events. Our proposed framework can be integrated with state-of-the-art event

  19. The NCBI BioSystems database.

    Science.gov (United States)

    Geer, Lewis Y; Marchler-Bauer, Aron; Geer, Renata C; Han, Lianyi; He, Jane; He, Siqian; Liu, Chunlei; Shi, Wenyao; Bryant, Stephen H

    2010-01-01

    The NCBI BioSystems database, found at http://www.ncbi.nlm.nih.gov/biosystems/, centralizes and cross-links existing biological systems databases, increasing their utility and target audience by integrating their pathways and systems into NCBI resources. This integration allows users of NCBI's Entrez databases to quickly categorize proteins, genes and small molecules by metabolic pathway, disease state or other BioSystem type, without requiring time-consuming inference of biological relationships from the literature or multiple experimental datasets.

  20. Increase of Bio-Gas Power Potential

    OpenAIRE

    V. Sednin; О. Kraetskaya; I. Prokoрenia

    2012-01-01

    The paper presents a review of industrial technologies for obtaining gas-synthesis which is applicable for bio-gas enrichment process. Comparative characteristics are given in the paper. The paper thoroughly considers a technology of dry methane conversion as the most expedient variant recommended for the application in this case. The bio-gas enrichment carried out during its production expands possibilities and efficiency of its application.

  1. Lasers for bio-optics

    Science.gov (United States)

    Sona, Alberto

    1992-03-01

    Lasers are being increasingly used in bioptics and in life sciences in general, especially for medical applications for therapy and diagnostics. Lasers are also broadly used in environment sciences to monitor atmospheric parameters and concentrations of molecular species of natural origin or coming from human activities such as the various kind of pollutants. The peculiar features of lasers exploited in these areas are mainly the capability of developing an action or performing a measurement without physical contact with the target and, if required, from a remote position with the assistance of suitable beam delivery systems such as telescopes, microscopes, or optical fibers. These features are directly related to the space and time coherence of the laser light and to the energy storage capability of the laser material which allow an extremely effective concentration of the beam energy in space, direction frequency, or time. A short description of the principle of operation and relevant properties of lasers are given and the most significant properties of the laser emission are briefly reviewed. Lasers for medical applications (mainly for therapy) will be mentioned, pointing out the specific property exploited for the various applications. Finally, examples of laser applications to the environmental sciences will be reported. A summary of the properties exploited in the various bio-optical applications is shown.

  2. Learning bio-micro-nanotechnology

    CERN Document Server

    Mendelson, Mel I

    2013-01-01

    Thinking Small and BigIntroductionBit of Technology HistoryTera-to-Pico MultipliersSize of ThingsWhat Is ""Small Technology?""Memory Lane in ElectronicsApplicationsKey ConceptsQuestions and ProblemsReferencesBiomolecules and CellsIntroductionScience of EvolutionPowers of ""10"" RevisitedBuilding a Human CellBiomoleculesProtein FoldingIdentifying BiomoleculesForensic MethodsGenetic Variation: MutationsKey ConceptsQuestions and ProblemsReferencesMolecular ChemistryIntroductionPeriodic TableSome Chemical DefinitionsChemical BondingMacromoleculesPolymer ExamplesColloidsSolid NanomoleculesKey Conce

  3. Evolving BioAssay Ontology (BAO): modularization, integration and applications.

    Science.gov (United States)

    Abeyruwan, Saminda; Vempati, Uma D; Küçük-McGinty, Hande; Visser, Ubbo; Koleti, Amar; Mir, Ahsan; Sakurai, Kunie; Chung, Caty; Bittker, Joshua A; Clemons, Paul A; Brudz, Steve; Siripala, Anosha; Morales, Arturo J; Romacker, Martin; Twomey, David; Bureeva, Svetlana; Lemmon, Vance; Schürer, Stephan C

    2014-01-01

    The lack of established standards to describe and annotate biological assays and screening outcomes in the domain of drug and chemical probe discovery is a severe limitation to utilize public and proprietary drug screening data to their maximum potential. We have created the BioAssay Ontology (BAO) project (http://bioassayontology.org) to develop common reference metadata terms and definitions required for describing relevant information of low-and high-throughput drug and probe screening assays and results. The main objectives of BAO are to enable effective integration, aggregation, retrieval, and analyses of drug screening data. Since we first released BAO on the BioPortal in 2010 we have considerably expanded and enhanced BAO and we have applied the ontology in several internal and external collaborative projects, for example the BioAssay Research Database (BARD). We describe the evolution of BAO with a design that enables modeling complex assays including profile and panel assays such as those in the Library of Integrated Network-based Cellular Signatures (LINCS). One of the critical questions in evolving BAO is the following: how can we provide a way to efficiently reuse and share among various research projects specific parts of our ontologies without violating the integrity of the ontology and without creating redundancies. This paper provides a comprehensive answer to this question with a description of a methodology for ontology modularization using a layered architecture. Our modularization approach defines several distinct BAO components and separates internal from external modules and domain-level from structural components. This approach facilitates the generation/extraction of derived ontologies (or perspectives) that can suit particular use cases or software applications. We describe the evolution of BAO related to its formal structures, engineering approaches, and content to enable modeling of complex assays and integration with other ontologies and

  4. Android quick APIs reference

    CERN Document Server

    Cinar, Onur

    2015-01-01

    The Android Quick APIs Reference is a condensed code and APIs reference for the new Google Android 5.0 SDK. It presents the essential Android APIs in a well-organized format that can be used as a handy reference. You won't find any technical jargon, bloated samples, drawn out history lessons, or witty stories in this book. What you will find is a software development kit and APIs reference that is concise, to the point and highly accessible. The book is packed with useful information and is a must-have for any mobile or Android app developer or programmer. In the Android Quick APIs Refe

  5. Workplace Ergonomics Reference Guide

    Science.gov (United States)

    Workplace Ergonomics Reference Guide 2 nd Edition A Publication of the Computer/Electronic Accommodations Program Real Solutions for Real ... Table of Contents.................................................................................................................................. ... Checklist ........................................................................................................................... 3 Ergonomic ...

  6. Bio-Organic Reaction Animations (BioORA): Student Performance, Student Perceptions, and Instructor Feedback

    Science.gov (United States)

    Gunersel, Adalet Baris; Fleming, Steven

    2014-01-01

    Research shows that computer animations are especially helpful in fields such as chemistry and in this mixed-methods study, we investigate the educational effectiveness of Bio-Organic Reaction Animations (BioORA), a 3-D software, in four undergraduate biochemistry classes at different universities. Statistically significant findings indicate that…

  7. tmBioC: improving interoperability of text-mining tools with BioC.

    Science.gov (United States)

    Khare, Ritu; Wei, Chih-Hsuan; Mao, Yuqing; Leaman, Robert; Lu, Zhiyong

    2014-01-01

    The lack of interoperability among biomedical text-mining tools is a major bottleneck in creating more complex applications. Despite the availability of numerous methods and techniques for various text-mining tasks, combining different tools requires substantial efforts and time owing to heterogeneity and variety in data formats. In response, BioC is a recent proposal that offers a minimalistic approach to tool interoperability by stipulating minimal changes to existing tools and applications. BioC is a family of XML formats that define how to present text documents and annotations, and also provides easy-to-use functions to read/write documents in the BioC format. In this study, we introduce our text-mining toolkit, which is designed to perform several challenging and significant tasks in the biomedical domain, and repackage the toolkit into BioC to enhance its interoperability. Our toolkit consists of six state-of-the-art tools for named-entity recognition, normalization and annotation (PubTator) of genes (GenNorm), diseases (DNorm), mutations (tmVar), species (SR4GN) and chemicals (tmChem). Although developed within the same group, each tool is designed to process input articles and output annotations in a different format. We modify these tools and enable them to read/write data in the proposed BioC format. We find that, using the BioC family of formats and functions, only minimal changes were required to build the newer versions of the tools. The resulting BioC wrapped toolkit, which we have named tmBioC, consists of our tools in BioC, an annotated full-text corpus in BioC, and a format detection and conversion tool. Furthermore, through participation in the 2013 BioCreative IV Interoperability Track, we empirically demonstrate that the tools in tmBioC can be more efficiently integrated with each other as well as with external tools: Our experimental results show that using BioC reduces >60% in lines of code for text-mining tool integration. The tmBioC toolkit

  8. Bio-films and processes of bio-corrosion and bio-deterioration in oil-and gas-processing industry

    Energy Technology Data Exchange (ETDEWEB)

    Kholodenko, V.P.; Irkhina, I.A.; Chugunov, V.A.; Rodin, V.B.; Zhigletsova, S.K.; Yermolenko, Z.M.; Rudavin, V.V. [State Research Center for Applied Microbiology, Obolensk, Moscow region (Russian Federation)

    2004-07-01

    As a rule, oil- and gas-processing equipment and pipelines are attacked by different microorganisms. Their vital ability determines processes of bio-deterioration and bio-corrosion that lead often to technological accidents and severe environmental contamination. Bio-films presenting a complex association of different microorganisms and their metabolites are responsible for most of damages. In this context, to study the role bio-films may play in processes of bio-damages and in efficacy of protective measures is important. We have developed method of culturing bio-films on the surface of metal coupons by using a natural microbial association isolated from oil-processing sites. Simple and informative methods of determining microbiological parameters of bio-films required to study bio-corrosion processes are also developed. In addition, a method of electron microscopic analysis of bio-films and pitting corrosion is offered. Using these methods, we conducted model experiments to determine the dynamics of corrosion processes depending on qualitative and quantitative composition of bio-films, aeration conditions and duration of the experiment. A harmful effect of soil bacteria and micro-mycetes on different pipeline coatings was also investigated. Experiments were conducted within 3-6 months and revealed degrading action of microorganisms. This was confirmed by axial tension testing of coatings. All these approaches will be used for further development of measures to protect gas- and oil-processing equipment and pipelines against bio-corrosion and bio-damages (first of all biocides). (authors)

  9. Bio-optofluidics and Bio-photonics: Programmable Phase Optics activities at DTU Fotonik

    DEFF Research Database (Denmark)

    Bañas, Andrew Rafael; Palima, Darwin; Pedersen, Finn

    We present ongoing research and development activities for constructing a compact next generation BioPhotonics Workstation and a Bio-optofluidic Cell Sorter (cell-BOCS) for all-optical micromanipulation platforms utilizing low numerical aperture beam geometries. Unlike conventional high NA optica...... the BioPhotonics Workstation platform more photon efficient by studying the 3D distribution of the counter propagating beams and utilizing the Generalized Phase Contrast (GPC) method for illuminating the applied spatial light modulators.......We present ongoing research and development activities for constructing a compact next generation BioPhotonics Workstation and a Bio-optofluidic Cell Sorter (cell-BOCS) for all-optical micromanipulation platforms utilizing low numerical aperture beam geometries. Unlike conventional high NA optical...

  10. Aspect and Reference time

    NARCIS (Netherlands)

    Borik, O.

    2002-01-01

    This thesis provides a theory of aspect in Russian based on the notion of Reference time. The main claim advocated in this study is that there are two types of aspect, predicational/telicity aspect and perspective or Reference time aspect. It is argued that these two types should be carefully distin

  11. Reference class forecasting

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    optimisme og misinformation. RCF bygger på teorier, som vandt Daniel Kahneman Nobelprisen i økonomi i 2002. RCF estimerer budgettet for et givet projekt på grundlag af de faktiske udfald for budgetterne i en reference-klasse af projekter. RCF udføres i tre trin: 1. Identifikation af en relevant reference...

  12. Marketing Reference Services.

    Science.gov (United States)

    Norman, O. Gene

    1995-01-01

    Relates the marketing concept to library reference services. Highlights include a review of the literature and an overview of marketing, including research, the marketing mix, strategic plan, marketing plan, and marketing audit. Marketing principles are applied to reference services through the marketing mix elements of product, price, place, and…

  13. Rethinking Virtual Reference

    Science.gov (United States)

    Tenopir, Carol

    2004-01-01

    Virtual reference services seem a natural extension of libraries digital collections and the emphasis on access to the library anytime, anywhere. If patrons use the library from home, it makes sense to provide them with person-to-person online reference. The Library of Congress (LC), OCLC, and several large library systems have developed and…

  14. Reference Service Training Manual.

    Science.gov (United States)

    Mielke, John; Young, William

    This manual is primarily designed as an orientation program for librarians new to the Reference Services Division at the State University of New York at Albany University Libraries. It contains practical information and some of the procedures necessary for providing service at the reference desk in these libraries. The appendices provide samples…

  15. China Connections Reference Book.

    Science.gov (United States)

    Kalat, Marie B.; Hoermann, Elizabeth F.

    This reference book focuses on six aspects of the geography of the People's Republic of China. They are: territory, governing units, population and land use, waterways, land forms, and climates. Designed as a primary reference, the book explains how the Chinese people and their lifestyles are affected by China's geography. Special components…

  16. Bio-hydrogen production from tempeh and tofu processing wastes via fermentation process using microbial consortium: A mini-review

    Science.gov (United States)

    Rengga, Wara Dyah Pita; Wati, Diyah Saras; Siregar, Riska Yuliana; Wulandari, Ajeng Riswanti; Lestari, Adela Ayu; Chafidz, Achmad

    2017-03-01

    One of alternative energies that can replace fossil fuels is hydrogen. Hydrogen can be used to generate electricity and to power combustion engines for transportation. Bio-hydrogen produced from tempeh and tofu processing waste can be considered as a renewable energy. Bio-hydrogen produced from tempeh and tofu processing waste is beneficial because the waste of soybean straw and tofu processing waste is plentiful, cheap, renewable and biodegradable. Specification of tempeh and tofu processing waste were soybean straw and sludge of tofu processing. They contain carbohydrates (cellulose, hemicellulose, and lignin) and methane. This paper reviews the optimal condition to produce bio-hydrogen from tempeh and tofu processing waste. The production of bio-hydrogen used microbial consortium which were enriched from cracked cereals and mainly dominated by Clostridium butyricum and Clostridium roseum. The production process of bio-hydrogen from tempeh and tofu processing waste used acid pre-treatment with acid catalyzed hydrolysis to cleave the bond of hemicellulose and cellulose chains contained in biomass. The optimal production of bio-hydrogen has a yield of 6-6.8 mL/g at 35-60 °C, pH 5.5-7 in hydraulic retention time (HRT) less than 16 h. The production used a continuous system in an anaerobic digester. This condition can be used as a reference for the future research.

  17. Bio-functionalization of biomedical metals.

    Science.gov (United States)

    Xiao, M; Chen, Y M; Biao, M N; Zhang, X D; Yang, B C

    2017-01-01

    Bio-functionalization means to endow biomaterials with bio-functions so as to make the materials or devices more suitable for biomedical applications. Traditionally, because of the excellent mechanical properties, the biomedical metals have been widely used in clinic. However, the utilized functions are basically supporting or fixation especially for the implantable devices. Nowadays, some new functions, including bioactivity, anti-tumor, anti-microbial, and so on, are introduced to biomedical metals. To realize those bio-functions on the metallic biomedical materials, surface modification is the most commonly used method. Surface modification, including physical and chemical methods, is an effective way to alter the surface morphology and composition of biomaterials. It can endow the biomedical metals with new surface properties while still retain the good mechanical properties of the bulk material. Having analyzed the ways of realizing the bio-functionalization, this article briefly summarized the bio-functionalization concepts of six hot spots in this field. They are bioactivity, bony tissue inducing, anti-microbial, anti-tumor, anticoagulation, and drug loading functions.

  18. Protein-nanoparticle interactions the bio-nano interface

    CERN Document Server

    Rahman, Masoud; Tawil, Nancy; Yahia, L'Hocine; Mahmoudi, Morteza

    2013-01-01

    In recent years, the fabrication of nanomaterials and exploration of their properties have attracted the attention of various scientific disciplines such as biology, physics, chemistry, and engineering. Although nanoparticulate systems are of significant interest in various scientific and technological areas, there is little known about the safety of these nanoscale objects. It has now been established that the surfaces of nanoparticles are immediately covered by biomolecules (e.g. proteins, ions, and enzymes) upon their entrance into a biological medium. This interaction with the biological medium modulates the surface of the nanoparticles, conferring a “biological identity” to their surfaces (referred to as a “corona”), which determines the subsequent cellular/tissue responses. The new interface between the nanoparticles and the biological medium/proteins, called “bio-nano interface,” has been very rarely studied in detail to date, though the interest in this topic is rapidly growing. In this bo...

  19. Collaborating on Referring Expressions

    CERN Document Server

    Heeman, P A; Heeman, Peter A.; Hirst, Graeme

    1995-01-01

    This paper presents a computational model of how conversational participants collaborate in order to make a referring action successful. The model is based on the view of language as goal-directed behavior. We propose that the content of a referring expression can be accounted for by the planning paradigm. Not only does this approach allow the processes of building referring expressions and identifying their referents to be captured by plan construction and plan inference, it also allows us to account for how participants clarify a referring expression by using meta-actions that reason about and manipulate the plan derivation that corresponds to the referring expression. To account for how clarification goals arise and how inferred clarification plans affect the agent, we propose that the agents are in a certain state of mind, and that this state includes an intention to achieve the goal of referring and a plan that the agents are currently considering. It is this mental state that sanctions the adoption of g...

  20. Bioética e anestesia: um estudo reflexivo de publicações da Revista Brasileira de Anestesiologia

    Directory of Open Access Journals (Sweden)

    Maria de Fátima Oliveira dos Santos

    2011-02-01

    Full Text Available JUSTIFICATIVA E OBJETIVOS: Especificamente no caso da Anestesiologia, há grande carência de subsídios teóricos para nortear os princípios bioéticos. O presente trabalho propõe a análise da produção bibliográfica referente ao tema Bioética, em forma de artigos, da Revista Brasileira de Anestesiologia, entre os anos 1999 e 2009. MÉTODO: Foram selecionados três artigos da Revista Brasileira de Anestesiologia, publicados no período de 1999 a 2009. Os artigos tratavam da questão bioética especificamente na área de Anestesiologia, ou faziam relação entre Anestesia e Bioética. Como procedimento metodológico, empregou-se a técnica de análise de conteúdo manual, segundo o modelo de Bardin. RESULTADOS: Observou-se que o tema mais emergente no material analisado refere-se aos ideais da Bioética, destacando-se o ideal do Principialismo (f 23; 23,5%. Por outro lado, a classe que define a ética como o berço da Bioética foi a que obteve menor quantidade de Unidade de Contexto Elementar (UCE (f 15, 15,3%. CONCLUSÕES: Nas produções referenciadas, a Bioética ainda é considerada um ideal a ser atingido, encontrando dificuldade no âmbito de aplicação na prática diária da Anestesiologia. Ressalta-se a necessidade de se realizarem estudos que abordem a Anestesia e a Bioética de maneira mais específica, refletindo problemáticas que envolvam ambos os temas.

  1. BIOS、CMOS和BIOS SETUP程序

    Institute of Scientific and Technical Information of China (English)

    海丽切木·阿不来提

    2004-01-01

    BIOS SETUP程序的任务是将硬件参数存放在BIOS参数存储器——CMOS中,CMOS需要电池供电来保存这些参数,以便于下次启动时使用.本文主要介绍了BIOS ROM的概念,BIOS的存放地点,BIOS的分类,BIOS主要内容,BIOS功能,CMOS RAM的概念,CMOS RAM的特点,CMOS RAM的内容,BIOS SETUP程序,SETUP存放地点,SETUP的类型,进入SETUP程序的方法和SETUP的设置等内容.

  2. Upscaling of Bio-mediated Soil Improvement

    Energy Technology Data Exchange (ETDEWEB)

    J. T. DeJong; B. C. Martinez; B. M. Mortensen; D. C. Nelson; J. T. Waller; M. H. Weil; T. R. Ginn; T. Weathers; T. Barkouki; Y. Fujita; G. Redden; C. Hunt; D. Major; B. Tunyu

    2009-10-01

    As demand for soil improvement continues to increase, new, sustainable, and innocuous methods are needed to alter the mechanical properties of soils. Recent research has demonstrated the potential of bio-mediated soil improvement for geotechnical applications (DeJong et al. 2006, Whiffin et al. 2007). Upscaling the bio-mediated treatment process for in situ implementation presents a number of challenges to be addressed, including soil and pore fluid interactions, bioaugmentation versus biostimulation of microbial communities, controlled distribution of mediated calcite precipitation, and permanence of the cementation. Current studies are utilizing large-scale laboratory experiments, non-destructive geophysical measurements, and modeling, to develop an optimized and predictable bio-mediated treatment method.

  3. The 3rd DBCLS BioHackathon

    DEFF Research Database (Denmark)

    Katayama, Toshiaki; Wilkinson, Mark D; Micklem, Gos

    2013-01-01

    together representatives from public databases, analytical tool providers, and cyber-infrastructure researchers to jointly tackle important challenges in the area of in silico biological research. RESULTS: The theme of BioHackathon 2010 was the 'Semantic Web', and all attendees gathered with the shared......ABSTRACT: BACKGROUND: BioHackathon 2010 was the third in a series of meetings hosted by the Database Center for Life Sciences (DBCLS) in Tokyo, Japan. The overall goal of the BioHackathon series is to improve the quality and accessibility of life science research data on the Web by bringing...... goal of producing Semantic Web data from their respective resources, and/or consuming or interacting those data using their tools and interfaces. We discussed on topics including guidelines for designing semantic data and interoperability of resources. We consequently developed tools and clients...

  4. BioSense 2.0

    Science.gov (United States)

    Chester, Kelley G.

    2013-01-01

    Objective To familiarize public health practitioners with the BioSense 2.0 application and its use in all hazard surveillance. Introduction BioSense 2.0 protects the health of the American people by providing timely insight into the health of communities, regions, and the nation by offering a variety of features to improve data collection, standardization, storage, analysis, and collaboration. BioSense 2.0 is the result of a partnership between the Centers for Disease Control and Prevention (CDC) and the public health community to track the health and well-being of communities across the country. In 2010, the BioSense Program began a redesign effort to improve features such as centralized data mining and addressing concerns that the system could not meet its original objective to provide early warning or detect local outbreaks. Methods Using the latest technology, BioSense 2.0 integrates current health data shared by health departments from a variety of sources to provide insight on the health of communities and the country. By getting more information faster, local, state, and federal public health partners can detect and respond to more outbreaks and health events more quickly. From flu outbreaks to car accidents, BioSense 2.0 provides the critical data, information, and tools that public health officials need to better understand and address health problems at the local, state, regional, and national levels. Also, by knowing what is happening across local borders, public health professionals can anticipate potential health problems and respond effectively to protect the health of all people. The demonstration will include a basic overview of the BioSense 2.0 application and the functionality available to public health departments and their data providers. The presenter will also show an example of how BioSense 2.0 can be used in a real-world public health example. Conclusions Over the past two years much has been accomplished during the redesign effort. Bio

  5. Bio-based liquid crystalline polyesters

    Science.gov (United States)

    Wilsens, Carolus; Rastogi, Sanjay; Dutch Collaboration

    2013-03-01

    The reported thin-film polymerization has been used as a screening method in order to find bio-based liquid crystalline polyesters with convenient melting temperatures for melt-processing purposes. An in depth study of the structural, morphological and chemical changes occurring during the ongoing polycondensation reactions of these polymers have been performed. Structural and conformational changes during polymerization for different compositions have been followed by time resolved X-ray and Infrared spectroscopy. In this study, bio-based monomers such as vanillic acid and 2,5-furandicarboxylic acid are successfully incorporated in liquid crystalline polyesters and it is shown that bio-based liquid crystalline polymers with high aromatic content and convenient processing temperatures can be synthesized. Special thanks to the Dutch Polymer Institute for financial support

  6. Dry electrode bio-potential recordings.

    Science.gov (United States)

    Gargiulo, Gaetano; Bifulco, Paolo; McEwan, Alistair; Nasehi Tehrani, Joubin; Calvo, Rafael A; Romano, Maria; Ruffo, Mariano; Shephard, Richard; Cesarelli, Mario; Jin, Craig; Mohamed, Armin; van Schaik, André

    2010-01-01

    As wireless bio-medical long term monitoring moves towards personal monitoring it demands very high input impedance systems capable to extend the reading of bio-signal during the daily activities offering a kind of "stress free", convenient connection, with no need for skin preparation. In particular we highlight the development and broad applications of our own circuits for wearable bio-potential sensor systems enabled by the use of an FET based amplifier circuit with sufficiently high impedance to allow the use of passive dry electrodes which overcome the significant barrier of gel based contacts. In this paper we present the ability of dry electrodes in long term monitoring of ECG, EEG and fetal ECG.

  7. CSS Pocket Reference

    CERN Document Server

    Meyer, Eric

    2011-01-01

    When you're working with CSS and need a quick answer, CSS Pocket Reference delivers. This handy, concise book provides all of the essential information you need to implement CSS on the fly. Ideal for intermediate to advanced web designers and developers, the 4th edition is revised and updated for CSS3, the latest version of the Cascading Style Sheet specification. Along with a complete alphabetical reference to CSS3 selectors and properties, you'll also find a short introduction to the key concepts of CSS. Based on Cascading Style Sheets: The Definitive Guide, this reference is an easy-to-us

  8. Regular Expression Pocket Reference

    CERN Document Server

    Stubblebine, Tony

    2007-01-01

    This handy little book offers programmers a complete overview of the syntax and semantics of regular expressions that are at the heart of every text-processing application. Ideal as a quick reference, Regular Expression Pocket Reference covers the regular expression APIs for Perl 5.8, Ruby (including some upcoming 1.9 features), Java, PHP, .NET and C#, Python, vi, JavaScript, and the PCRE regular expression libraries. This concise and easy-to-use reference puts a very powerful tool for manipulating text and data right at your fingertips. Composed of a mixture of symbols and text, regular exp

  9. Handbook of reference electrodes

    CERN Document Server

    Inzelt, György; Scholz, Fritz

    2013-01-01

    Reference Electrodes are a crucial part of any electrochemical system, yet an up-to-date and comprehensive handbook is long overdue. Here, an experienced team of electrochemists provides an in-depth source of information and data for the proper choice and construction of reference electrodes. This includes all kinds of applications such as aqueous and non-aqueous solutions, ionic liquids, glass melts, solid electrolyte systems, and membrane electrodes. Advanced technologies such as miniaturized, conducting-polymer-based, screen-printed or disposable reference electrodes are also covered. Essen

  10. STL pocket reference

    CERN Document Server

    Lischner, Ray

    2003-01-01

    The STL Pocket Reference describes the functions, classes, and templates in that part of the C++ standard library often referred to as the Standard Template Library (STL). The STL encompasses containers, iterators, algorithms, and function objects, which collectively represent one of the most important and widely used subsets of standard library functionality. The C++ standard library, even the subset known as the STL, is vast. It's next to impossible to work with the STL without some sort of reference at your side to remind you of template parameters, function invocations, return types--ind

  11. Biomedical Engineering Desk Reference

    CERN Document Server

    Ratner, Buddy D; Schoen, Frederick J; Lemons, Jack E; Dyro, Joseph; Martinsen, Orjan G; Kyle, Richard; Preim, Bernhard; Bartz, Dirk; Grimnes, Sverre; Vallero, Daniel; Semmlow, John; Murray, W Bosseau; Perez, Reinaldo; Bankman, Isaac; Dunn, Stanley; Ikada, Yoshito; Moghe, Prabhas V; Constantinides, Alkis

    2009-01-01

    A one-stop Desk Reference, for Biomedical Engineers involved in the ever expanding and very fast moving area; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the biomedical engineering field. Material covers a broad range of topics including: Biomechanics and Biomaterials; Tissue Engineering; and Biosignal Processing* A hard-working desk reference providing all the essential material needed by biomedical and clinical engineers on a day-to-day basis * Fundamentals, key techniques,

  12. R quick syntax reference

    CERN Document Server

    Tollefson, Margot

    2014-01-01

    The R Quick Syntax Reference is a handy reference book detailing the intricacies of the R language. Not only is R a free, open-source tool, R is powerful, flexible, and has state of the art statistical techniques available. With the many details which must be correct when using any language, however, the R Quick Syntax Reference makes using R easier.Starting with the basic structure of R, the book takes you on a journey through the terminology used in R and the syntax required to make R work. You will find looking up the correct form for an expression quick and easy. With a copy of the R Quick

  13. LINQ Pocket Reference

    CERN Document Server

    Albahari, Joseph

    2008-01-01

    Ready to take advantage of LINQ with C# 3.0? This guide has the detail you need to grasp Microsoft's new querying technology, and concise explanations to help you learn it quickly. And once you begin to apply LINQ, the book serves as an on-the-job reference when you need immediate reminders. All the examples in the LINQ Pocket Reference are preloaded into LINQPad, the highly praised utility that lets you work with LINQ interactively. Created by the authors and free to download, LINQPad will not only help you learn LINQ, it will have you thinking in LINQ. This reference explains: LINQ's ke

  14. Bio-methanol from Bio-oil Reforming Syngas Using Dual-reactor

    Institute of Scientific and Technical Information of China (English)

    Tong-qi Ye; Shi-zhi Yan; Yong Xu; Song-bai Qiu; Yong Liu; Quan-xin Li

    2011-01-01

    A dual-reactor,assembled with the on-line syngas conditioning and methanol synthesis,was successfully applied for high efficient conversion of rich CO2 bio-oil derived syngas to bio-methanol.In the forepart catalyst bed reactor,the catalytic conversion can effectively adjust the rich-CO2 crude bio-syngas into the CO-containing bio-syngas using the CuZnAlZr catalyst.After the on-line syngas conditioning at 450 ℃,the CO2/CO ratio in the biosyngas significantly decreased from 6.3 to 1.2.In the rearward catalyst bed reactor,the conversion of the conditioned bio-syngas to bio-methanol shows the maximum yield about 1.21 kg/(kgcatal·h) MeOH with a methanol selectivity of 97.9% at 260 ℃ and 5.05 MPa using conventional CuZnAl catalyst,which is close to the level typically obtained in the conventional methanol synthesis process using natural gas.The influences of temperature,pressure and space velocity on the bio-methanol synthesis were also investigated in detail.

  15. Pyrolysis of hornbeam (Carpinus betulus L.) sawdust: Characterization of bio-oil and bio-char.

    Science.gov (United States)

    Moralı, Uğur; Yavuzel, Nazan; Şensöz, Sevgi

    2016-12-01

    Slow pyrolysis of hornbeam (Carpinus betulus L.) sawdust was performed to produce bio-oil and bio-char. The operational variables were as follows: pyrolysis temperature (400-600°C), heating rate (10-50°Cmin(-1)) and nitrogen flow rate (50-150cm(3)min(-1)). Physicochemical and thermogravimetric characterizations of hornbeam sawdust were performed. The characteristics of bio-oil and bio-char were analyzed on the basis of various spectroscopic and chromatographic techniques such as FTIR, GC-MS, 1H NMR, SEM, BET. Higher heating value, density and kinematic viscosity of the bio-oil with maximum yield of 35.28% were 23.22MJkg(-1), 1289kgm(-3) and 0.6mm(2)s(-1), respectively. The bio-oil with relatively high fuel potential can be obtained from the pyrolysis of the hornbeam sawdust and the bio-char with a calorific value of 32.88MJkg(-1) is a promising candidate for solid fuel applications that also contributes to the preservation of the environment.

  16. Bio-microfluidics: biomaterials and biomimetic designs.

    Science.gov (United States)

    Domachuk, Peter; Tsioris, Konstantinos; Omenetto, Fiorenzo G; Kaplan, David L

    2010-01-12

    Bio-microfluidics applies biomaterials and biologically inspired structural designs (biomimetics) to microfluidic devices. Microfluidics, the techniques for constraining fluids on the micrometer and sub-micrometer scale, offer applications ranging from lab-on-a-chip to optofluidics. Despite this wealth of applications, the design of typical microfluidic devices imparts relatively simple, laminar behavior on fluids and is realized using materials and techniques from silicon planar fabrication. On the other hand, highly complex microfluidic behavior is commonplace in nature, where fluids with nonlinear rheology flow through chaotic vasculature composed from a range of biopolymers. In this Review, the current state of bio-microfluidic materials, designs and applications are examined. Biopolymers enable bio-microfluidic devices with versatile functionalization chemistries, flexibility in fabrication, and biocompatibility in vitro and in vivo. Polymeric materials such as alginate, collagen, chitosan, and silk are being explored as bulk and film materials for bio-microfluidics. Hydrogels offer options for mechanically functional devices for microfluidic systems such as self-regulating valves, microlens arrays and drug release systems, vital for integrated bio-microfluidic devices. These devices including growth factor gradients to study cell responses, blood analysis, biomimetic capillary designs, and blood vessel tissue culture systems, as some recent examples of inroads in the field that should lead the way in a new generation of microfluidic devices for bio-related needs and applications. Perhaps one of the most intriguing directions for the future will be fully implantable microfluidic devices that will also integrate with existing vasculature and slowly degrade to fully recapitulate native tissue structure and function, yet serve critical interim functions, such as tissue maintenance, drug release, mechanical support, and cell delivery.

  17. ¿Bioética narrativa o narrativa bioética?

    Directory of Open Access Journals (Sweden)

    Miguel Kottow

    2016-01-01

    Full Text Available Desde los inicios de la bioética, se presenta y agudiza el conflicto entre biomedicina científica basada en evidencia y la bioética preocupada de valores personales y participativos expresados en el consentimiento informado. La medicina terapéutica y la investigación biomédica propician la participación autónoma de pacientes y probandos, la cual se expresa en la narrativa que destaca los valores existenciales de cada persona y el contexto social donde vive. Las humanidades médicas son convocadas para sensibilizar a los profesionales de la salud en sus tareas. Su influencia por elevar los elementos narrativos en la comunicación biomédica ha sido insuficiente y de influencia decreciente, su aporte ancilar a la bioética narrativa no ha logrado evitar un academicismo extremo y una irrelevancia social de la disciplina bioética que está en riesgo de ser marginada, desoída y precipitada en una crisis de validación. Sugiere este artículo atender fuentes no académicas que se muestran plenamente competentes y atractivas para encarar los problemas que la bioética no ha sabido resolver, destacando la publicación de novelas ficcionales que abordan temas bioéticos de forma amena y sistemática, que impactan más allá de las deliberaciones anémicas de la bioética: The Children Act (I. McKewan, 2014 y Reparar a los vivo (M. de Kerangal, M., 2015 son presentadas como propuesta de inaugurar la narrativa bioética, que es el relato ficcional de temas bioéticos.

  18. Context Dependent Analysis of BioAmbients

    DEFF Research Database (Denmark)

    Pilegaard, Henrik; Nielson, Flemming; Nielson, Hanne Riis

    2006-01-01

    BioAmbients is a derivative of mobile ambients that has shown promise of describing interesting features of the behaviour of biological systems. The technical contribution of this paper is to extend the Flow Logic approach to static analysis with a couple of new techniques in order to give precise...... information about the behaviour of systems written in BioAmbients. Applying the development to a simple model of a cell releasing nutrients from food compunds we illustrate how the proposed analysis does indeed improve on previous efforts....

  19. Bio-engineering in the Baltic Sea

    DEFF Research Database (Denmark)

    Zandersen, Marianne

    2011-01-01

    Bio-engineering in the Baltic Sea – value of water quality improvements & risk perceptions Dr. Marianne Zandersen1 Department of Environmental Science, Aarhus University Abstract The Baltic Sea is heavily eutrofied and the trend has gone from bad to worse. The hypoxic zone has increased about 4...... of the water column to the bottom waters/deepwater. The expected effects include a slowing down of the sediment release from the bottom and improvement of the possibilities for aerobic bacterial decomposition and over time for the establishment of fauna. The projects test a bio-engineered approach to speeding...

  20. Research on Miniature Hexapod Bio-robot

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    This paper described the structure and control of a new kind of miniature hexapod bio-robot, analyzed the moving principle of the robot. The robot is based on the principle of bionics, its structure is simple, design novel, unique. It can move forwards and backwards. The external dimensions of bio-robot is: length 30 mm,width 40 mm, height 20 mm, weight 6.3 g. Some tests about the model robot were made. The experimental results show that the robot has good mobility.

  1. Underwater Sound Reference Division

    Data.gov (United States)

    Federal Laboratory Consortium — The Underwater Sound Reference Division (USRD) serves as the U.S. standardizing activity in the area of underwater acoustic measurements, as the National Institute...

  2. Ozone Standard Reference Photometer

    Data.gov (United States)

    Federal Laboratory Consortium — The Standard Reference Photometer (SRP) Program began in the early 1980s as collaboration between NIST and the U.S. Environmental Protection Agency (EPA) to design,...

  3. Reference Climatological Stations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Reference Climatological Stations (RCS) network represents the first effort by NOAA to create and maintain a nationwide network of stations located only in areas...

  4. Genetics Home Reference: hypermethioninemia

    Science.gov (United States)

    ... C. Mutations in human glycine N-methyltransferase give insights into its role in methionine metabolism. Hum Genet. ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  5. Toxicity Reference Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Toxicity Reference Database (ToxRefDB) contains approximately 30 years and $2 billion worth of animal studies. ToxRefDB allows scientists and the interested...

  6. Enterprise Reference Library

    Science.gov (United States)

    Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

    2011-01-01

    Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

  7. The fairy tale of bio-ethanol. Het sprookje van de bio-ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Beverloo, W.A. (Vakgroep Levensmiddelentechnologie, Landbouwuniversiteit Wageningen (Netherlands))

    1992-03-01

    Agricultural products can be converted into bio-ethanol. Proponents of the bio-ethanol production however use inaccurate arguments with regard to the comparison of the prices per liter for bio-ethanol and petrol instead of using the net heating value of the fuels. Also their basic assumptions concerning the energy efficiency or the energy balances or the carbon dioxide emissions are incorrect. The production of biomass for energy does not serve any other societal interest than subsidized employment for agricultural farmers. 4 tabs., 9 refs.

  8. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  9. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>The format for citations in text and for bibliographic references follows GB/T 7714—2005.The citation should be ordered in number as it appears in the text of the submitted article.For journal article Sun,Y.,Li,B.,&Qu,J.F.Design and implementation of library intelligent IM reference robot.New Technology of Library and Information Service(in Chinese),2011,205:88–92.

  10. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>The format for citations in text and for bibliographic references follows GB/T 7714—2005.The citation should be ordered in number as it appears in the text of the submitted article.For journal article Sun,Y.,Li,B.,&Qu,J.F.Design and implementation of library intelligent IM reference robot.New Technology of Library and Information Service(in Chinese),

  11. Reference Based Genome Compression

    OpenAIRE

    Chern, Bobbie; Ochoa, Idoia; Manolakos, Alexandros; No, Albert; Venkat, Kartik; Weissman, Tsachy

    2012-01-01

    DNA sequencing technology has advanced to a point where storage is becoming the central bottleneck in the acquisition and mining of more data. Large amounts of data are vital for genomics research, and generic compression tools, while viable, cannot offer the same savings as approaches tuned to inherent biological properties. We propose an algorithm to compress a target genome given a known reference genome. The proposed algorithm first generates a mapping from the reference to the target gen...

  12. Palladium catalyzed hydrogenation of bio-oils and organic compounds

    Science.gov (United States)

    Elliott, Douglas C.; Hu, Jianli; Hart, Todd R.; Neuenschwander, Gary G.

    2008-09-16

    The invention provides palladium-catalyzed hydrogenations of bio-oils and certain organic compounds. Experimental results have shown unexpected and superior results for palladium-catalyzed hydrogenations of organic compounds typically found in bio-oils.

  13. Reference Man anatomical model

    Energy Technology Data Exchange (ETDEWEB)

    Cristy, M.

    1994-10-01

    The 70-kg Standard Man or Reference Man has been used in physiological models since at least the 1920s to represent adult males. It came into use in radiation protection in the late 1940s and was developed extensively during the 1950s and used by the International Commission on Radiological Protection (ICRP) in its Publication 2 in 1959. The current Reference Man for Purposes of Radiation Protection is a monumental book published in 1975 by the ICRP as ICRP Publication 23. It has a wealth of information useful for radiation dosimetry, including anatomical and physiological data, gross and elemental composition of the body and organs and tissues of the body. The anatomical data includes specified reference values for an adult male and an adult female. Other reference values are primarily for the adult male. The anatomical data include much data on fetuses and children, although reference values are not established. There is an ICRP task group currently working on revising selected parts of the Reference Man document.

  14. Bioenergy Status Document 2012; Statusdocument Bio-energie 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bles, M.; Schepers, B.; Van Grinsven, A.; Bergsma, G.; Croezen, H. [CE Delft, Delft (Netherlands)

    2013-05-15

    In addition to a review and characterisation of the current situation, the report contains an update on government policies on bio-energy and a review of the sources and sustainability of the biomass used in the Netherlands [Dutch] Het statusdocument bio-energie 2012 geeft de huidige status weer van bio-energie in Nederland, inclusief trends en verwachtingen voor de toekomst. Het doel van dit document is inzicht verstrekken in de ontwikkelingen van bio-energie, voor overheden en marktpartijen.

  15. BioNumbers--the database of key numbers in molecular and cell biology.

    Science.gov (United States)

    Milo, Ron; Jorgensen, Paul; Moran, Uri; Weber, Griffin; Springer, Michael

    2010-01-01

    BioNumbers (http://www.bionumbers.hms.harvard.edu) is a database of key numbers in molecular and cell biology--the quantitative properties of biological systems of interest to computational, systems and molecular cell biologists. Contents of the database range from cell sizes to metabolite concentrations, from reaction rates to generation times, from genome sizes to the number of mitochondria in a cell. While always of importance to biologists, having numbers in hand is becoming increasingly critical for experimenting, modeling, and analyzing biological systems. BioNumbers was motivated by an appreciation of how long it can take to find even the simplest number in the vast biological literature. All numbers are taken directly from a literature source and that reference is provided with the number. BioNumbers is designed to be highly searchable and queries can be performed by keywords or browsed by menus. BioNumbers is a collaborative community platform where registered users can add content and make comments on existing data. All new entries and commentary are curated to maintain high quality. Here we describe the database characteristics and implementation, demonstrate its use, and discuss future directions for its development.

  16. [Implantable loop recorder BioMonitor 2 (Biotronik)].

    Science.gov (United States)

    Lewalter, Thorsten; Jilek, Clemens

    2016-12-01

    The implantable loop recorder BioMonitor 2 is available with an emphasis on syncope and one on detection of atrial tachycardias. The BioMonitor 2 can be easily implanted. The BioMonitor 2 pilot study showed a high and over time stable signal and the telemetric performance was above average.

  17. Boron brings big benefits to bio-based blends

    Science.gov (United States)

    The solution to the problems with bio-based lubrication can be approached by a combination of blending and additive strategies. However, many additives do not show efficacy when used in bio-based lubricants. Additive addition also lowers the bio-based content of the blend, which in turn limits the a...

  18. Catalytic Conversion of Bio-oil to Fuel for Transportation

    DEFF Research Database (Denmark)

    Mortensen, Peter Mølgaard

    identied as a prospective HDO catalyst, the stability and resistance toward bio-oil impurities was investigated in a high pressure gas and liquid continuous ow setup with bio-oil model compounds and compared to the more traditional hydrotreating catalysts Mo2C/ZrO2 and Ni-MoS2/ZrO2. The investigated bio...

  19. 78 FR 39327 - Bio Diagnostic International; Denial of Application

    Science.gov (United States)

    2013-07-01

    ... Doc No: 2013-15704] DEPARTMENT OF JUSTICE Drug Enforcement Administration [Docket No. 11-63] Bio... of Diversion Control, Drug Enforcement Administration, issued an Order to Show Cause to Bio... application of Bio Diagnostic International, Inc., for a DEA Certificate of Registration as a distributor...

  20. Bio-politics Reflexes” or something about what happens with Bio-politics today

    Directory of Open Access Journals (Sweden)

    Viorella Manolache

    2013-04-01

    Full Text Available Under the pressure dictated by Western modernity movements, life finally enters within strategic (long term relationships circuit. The present study establishes that, bio-politics and bio-power denounces the paradigm of politicization of the biological life. Foucault’s late writings confirm the subordination of bio-politics to the technologies of power, which integrate / reduce life to biological continuity of the species, to the objectification of individual body or investigation of self-techniques, that would allow (beyond the corset of the institutional, the (re affirmation of subjectivity as a force or a form of resistance. The present reactivation of the bio model establishes that we cannot evade Foucault’s view, in which, the biology- meeting – politics confirms that, none of the terms no longer retains its original meaning.

  1. BioNet Digital Communications Framework

    Science.gov (United States)

    Gifford, Kevin; Kuzminsky, Sebastian; Williams, Shea

    2010-01-01

    BioNet v2 is a peer-to-peer middleware that enables digital communication devices to talk to each other. It provides a software development framework, standardized application, network-transparent device integration services, a flexible messaging model, and network communications for distributed applications. BioNet is an implementation of the Constellation Program Command, Control, Communications and Information (C3I) Interoperability specification, given in CxP 70022-01. The system architecture provides the necessary infrastructure for the integration of heterogeneous wired and wireless sensing and control devices into a unified data system with a standardized application interface, providing plug-and-play operation for hardware and software systems. BioNet v2 features a naming schema for mobility and coarse-grained localization information, data normalization within a network-transparent device driver framework, enabling of network communications to non-IP devices, and fine-grained application control of data subscription band width usage. BioNet directly integrates Disruption Tolerant Networking (DTN) as a communications technology, enabling networked communications with assets that are only intermittently connected including orbiting relay satellites and planetary rover vehicles.

  2. Spatial Analysis of BioAmbients

    DEFF Research Database (Denmark)

    Nielson, Hanne Riis; Nielson, Flemming; Pilegaard, Henrik

    2004-01-01

    Programming language technology can contribute to the development and understanding of Systems Biology by providing formal calculi for specifying and analysing the dynamic behaviour of biological systems. Our focus is on BioAmbients, a variation of the ambient calculi developed for modelling...

  3. Control Flow Analysis for BioAmbients

    DEFF Research Database (Denmark)

    Nielson, Flemming; Nielson, Hanne Riis; Priami, C.

    2007-01-01

    This paper presents a static analysis for investigating properties of biological systems specified in BioAmbients. We exploit the control flow analysis to decode the bindings of variables induced by communications and to build a relation of the ambients that can interact with each other. We...

  4. Immersive Protein Gaming for Bio Edutainment

    Science.gov (United States)

    Cai, Yiyu; Lu, Baifang; Zheng, Jianmin; Li, Lin

    2006-01-01

    Games have long been used as a tool for teaching important subject matter, from concept building to problem solving. Through fun learning, students may further develop their curiosities and interest in their study. This article addresses the issue of learning biomolecular structures by virtual reality gaming. A bio edutainment solution featuring…

  5. Harvesting of microalgae by bio-flocculation

    NARCIS (Netherlands)

    Salim, S.; Bosma, R.; Vermuë, M.H.; Wijffels, R.H.

    2011-01-01

    The high-energy input for harvesting biomass makes current commercial microalgal biodiesel production economically unfeasible. A novel harvesting method is presented as a cost and energy efficient alternative: the bio-flocculation by using one flocculating microalga to concentrate the non-flocculati

  6. Jatropha bio-diesel production and use

    Energy Technology Data Exchange (ETDEWEB)

    Achten, W.M.J.; Aerts, R.; Muys, B. [Katholieke Universiteit Leuven, Division Forest, Nature and Landscape, Celestijnenlaan 200 E Box 2411, BE-3001 Leuven (Belgium); Verchot, L. [World Agroforestry Centre (ICRAF) Head Quarters, United Nations Avenue, P.O. Box 30677, Nairobi (Kenya); Franken, Y.J. [FACT Foundation, Horsten 1, 5612 AX Eindhoven (Netherlands); Mathijs, E. [Katholieke Universiteit Leuven, Division Agricultural and Food Economics, Willem de Croylaan 42 Box 2424, BE-3001 Leuven (Belgium); Singh, V.P. [World Agroforestry Centre (ICRAF) Regional Office for South Asia, CG Block, 1st Floor, National Agricultural Science Centre, Dev Prakash Shastri Marg, Pusa, New Delhi 110 012 (India)

    2008-12-15

    The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors, policy makers and clean development mechanism (CDM) project developers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. However, JCL is still a wild plant of which basic agronomic properties are not thoroughly understood and the environmental effects have not been investigated yet. Gray literature reports are very optimistic on simultaneous wasteland reclamation capability and oil yields, further fueling the Jatropha bio-diesel hype. In this paper, we give an overview of the currently available information on the different process steps of the production process of bio-diesel from JCL, being cultivation and production of seeds, extraction of the oil, conversion to and the use of the bio-diesel and the by-products. Based on this collection of data and information the best available practice, the shortcomings and the potential environmental risks and benefits are discussed for each production step. The review concludes with a call for general precaution and for science to be applied. (author)

  7. BioMEMS in drug delivery.

    Science.gov (United States)

    Nuxoll, Eric

    2013-11-01

    The drive to design micro-scale medical devices which can be reliably and uniformly mass produced has prompted many researchers to adapt processing technologies from the semiconductor industry. By operating at a much smaller length scale, the resulting biologically-oriented microelectromechanical systems (BioMEMS) provide many opportunities for improved drug delivery: Low-dose vaccinations and painless transdermal drug delivery are possible through precisely engineered microneedles which pierce the skin's barrier layer without reaching the nerves. Low-power, low-volume BioMEMS pumps and reservoirs can be implanted where conventional pumping systems cannot. Drug formulations with geometrically complex, extremely uniform micro- and nano-particles are formed through micromolding or with microfluidic devices. This review describes these BioMEMS technologies and discusses their current state of implementation. As these technologies continue to develop and capitalize on their simpler integration with other MEMS-based systems such as computer controls and telemetry, BioMEMS' impact on the field of drug delivery will continue to increase.

  8. A Review of BioTutor.

    Science.gov (United States)

    Duhrkopf, Richard

    1994-01-01

    A review of BioTutor which is software to accompany the third edition of Neil Campbell's textbook, "Biology," is provided. The review includes a brief description of the software and a discussion of good and bad features of the software. In the closing words, the reviewer expresses a considerable amount of concern regarding the quality of this…

  9. Bio-gas production from alligator weeds

    Science.gov (United States)

    Latif, A.

    1976-01-01

    Laboratory experiments were conducted to study the effect of temperature, sample preparation, reducing agents, light intensity and pH of the media, on bio-gas and methane production from the microbial anaerobic decomposition of alligator weeds (Alternanthera philoxeroides. Efforts were also made for the isolation and characterization of the methanogenic bacteria.

  10. Bio-antioxidant of Anthraquinone Derivatives

    Institute of Scientific and Technical Information of China (English)

    CUI,Jian; LI,Zhao-Long; HONG,Xiao-Yin

    2004-01-01

    @@ The Rubiaceae family is well known for containing anthraquinones. More specifically, lapachol and its analogues are known to possess antitumor, antibiotic, antimalarial and antiulceric activities.[1] Several report indicated that some quinones containing OH in its structure were found to have higher bio-activity than quinines lacking the OH group.

  11. BioProject Number PRJNA230524

    Science.gov (United States)

    This BioProject consists of raw genotyping-by-sequencing data collected in 96-plex format on an Illumina HiSeq 2000 sequencing system. There were four to six experimental replicates for each of the 46 plants. The development of tens of thousands of mapped SNP markers in wild tomato species was hig...

  12. Bio-Degradable Plastics Impact On Environment

    Directory of Open Access Journals (Sweden)

    T.SUBRAMANI

    2014-06-01

    Full Text Available The potential of biodegradable polymers and more particularly that of polymers obtained from renewable resources such as the polysaccharides (e.g., starch have long been recognized. However, these biodegradable polymers have been largely used in some applications (e.g., food industry and have not found extensive applications in the packaging industries to replace conventional plastic materials, although they could be an interesting way to overcome the limitation of the petrochemical resources in the future. The fossil fuel and gas could be partially replaced by greener agricultural sources, which should participate in the reduction of CO2 emissions. Bio-based and biodegradable plastics can form the basis for environmentally preferable, sustainable alternative to current materials based exclusively on petroleum feed stocks. These bio-based materials offer value in the sustainability/life-cycle equation by being a part of the biological carbon cycle, especially as it relates to carbon-based polymeric materials such as plastics, water soluble polymers and other carbon based products like lubricants, biodiesel, and detergents. Identification and quantification of bio based content uses radioactive C-14 signature. Biopolymers are generally capable of being utilized by living matter (biodegraded, and so can be disposed in safe and ecologically sound ways through disposal processes (waste management like composting, soil application, and biological wastewater treatment. Single use, short-life, disposable products can be engineered to be bio-based and biodegradable.

  13. Taking a view on bio-ontologies

    NARCIS (Netherlands)

    S. Jupp; A. Gibson; J. Malone; H. Parkinson; R. Stevens

    2012-01-01

    We present a technique for separating knowledge representation from application specific views that are currently often conflated within bio-ontologies. Many ontologies contain information for two tasks; one to represent the knowledge of some field of interest and another to support an application t

  14. Catalytic steam reforming of bio-oil

    DEFF Research Database (Denmark)

    Trane, R.; Dahl, S.; Skjøth-Rasmussen, M.S.;

    2012-01-01

    in an early stage of development and far from industrial application mainly due the short lifetime of the catalysts, but there are also other aspects of the process which need clarification. Future investigations in SR of bio-oil could be to find a sulfur tolerant and stable catalyst, or to investigate...

  15. Pathogenic fungi and Bio-control agents: Competitive bio-assay research

    OpenAIRE

    2014-01-01

    Fungi of the genus Trichoderma have a track record of being antagonist to quite of a number of agricultural important pathogens. Trichoderma have some unique characteristics that make it scientifically proven and suitable bio-control agents against varieties of pathogenic organism infecting economic food crops. Trichoderma has the advantage of being environment friendly and not hazardous to the health of human beings, livestock, soil and environment. Competitive bio-assay experiment was carri...

  16. New celestial reference system

    Science.gov (United States)

    Seidelmann, P. K.; Kaplan, G. H.; van Flandern, T. C.

    It is pointed out that the IAU (1976) System of Astronomical Constants, the FK5 and new lunar and planetary theories are being introduced in 1984. The investigation and planning for the transition have revealed the complex interdependencies between observational techniques and the reference systems and their strong link to the rotating and orbiting earth. Details for the conversion to the new system are given. The concepts for a future reference system are developed, based on separating the real motions involved in such a way that observations from various moving platforms can be related to the appropriate coordinate system without involving motions that are not intrinsically involved in the observations. As a consequence, the reference systems determined or used in space, while affected by aberration and parallax, would logically be defined with no dependence on precession, nutation, polar motion, or Universal Time, all of which are concerned with motions of the earth's surface.

  17. Setting reference targets

    Energy Technology Data Exchange (ETDEWEB)

    Ruland, R.E.

    1997-04-01

    Reference Targets are used to represent virtual quantities like the magnetic axis of a magnet or the definition of a coordinate system. To explain the function of reference targets in the sequence of the alignment process, this paper will first briefly discuss the geometry of the trajectory design space and of the surveying space, then continue with an overview of a typical alignment process. This is followed by a discussion on magnet fiducialization. While the magnetic measurement methods to determine the magnetic centerline are only listed (they will be discussed in detail in a subsequent talk), emphasis is given to the optical/mechanical methods and to the task of transferring the centerline position to reference targets.

  18. Reference Based Genome Compression

    CERN Document Server

    Chern, Bobbie; Manolakos, Alexandros; No, Albert; Venkat, Kartik; Weissman, Tsachy

    2012-01-01

    DNA sequencing technology has advanced to a point where storage is becoming the central bottleneck in the acquisition and mining of more data. Large amounts of data are vital for genomics research, and generic compression tools, while viable, cannot offer the same savings as approaches tuned to inherent biological properties. We propose an algorithm to compress a target genome given a known reference genome. The proposed algorithm first generates a mapping from the reference to the target genome, and then compresses this mapping with an entropy coder. As an illustration of the performance: applying our algorithm to James Watson's genome with hg18 as a reference, we are able to reduce the 2991 megabyte (MB) genome down to 6.99 MB, while Gzip compresses it to 834.8 MB.

  19. BioProject and BioSample databases at NCBI: facilitating capture and organization of metadata.

    Science.gov (United States)

    Barrett, Tanya; Clark, Karen; Gevorgyan, Robert; Gorelenkov, Vyacheslav; Gribov, Eugene; Karsch-Mizrachi, Ilene; Kimelman, Michael; Pruitt, Kim D; Resenchuk, Sergei; Tatusova, Tatiana; Yaschenko, Eugene; Ostell, James

    2012-01-01

    As the volume and complexity of data sets archived at NCBI grow rapidly, so does the need to gather and organize the associated metadata. Although metadata has been collected for some archival databases, previously, there was no centralized approach at NCBI for collecting this information and using it across databases. The BioProject database was recently established to facilitate organization and classification of project data submitted to NCBI, EBI and DDBJ databases. It captures descriptive information about research projects that result in high volume submissions to archival databases, ties together related data across multiple archives and serves as a central portal by which to inform users of data availability. Concomitantly, the BioSample database is being developed to capture descriptive information about the biological samples investigated in projects. BioProject and BioSample records link to corresponding data stored in archival repositories. Submissions are supported by a web-based Submission Portal that guides users through a series of forms for input of rich metadata describing their projects and samples. Together, these databases offer improved ways for users to query, locate, integrate and interpret the masses of data held in NCBI's archival repositories. The BioProject and BioSample databases are available at http://www.ncbi.nlm.nih.gov/bioproject and http://www.ncbi.nlm.nih.gov/biosample, respectively.

  20. Alkaline phosphatase immobilization onto Bio-Gide(R) and Bio-Oss(R) for periodontal and bone regeneration.

    NARCIS (Netherlands)

    Oortgiesen, D.A.W.; Plachokova, A.S.; Geenen, C.; Meijer, G.J.; Walboomers, X.F.; Beucken, J.J.J.P van den; Jansen, J.B.M.J.

    2012-01-01

    AIM: To evaluate the effect of alkaline phosphatase (ALP) immobilization onto Bio-Gide((R)) in vitro, and to study the in vivo performance of ALP-enriched Bio-Gide((R)) and/or Bio-Oss((R)) with the purpose to enhance periodontal regeneration. MATERIALS AND METHODS: Alkaline phosphatase ALP was immob

  1. HTML & XHTML Pocket Reference

    CERN Document Server

    Robbins, Jennifer

    2010-01-01

    After years of using spacer GIFs, layers of nested tables, and other improvised solutions for building your web sites, getting used to the more stringent standards-compliant design can be intimidating. HTML and XHTML Pocket Reference is the perfect little book when you need answers immediately. Jennifer Niederst-Robbins, author Web Design in a Nutshell, has revised and updated the fourth edition of this pocket guide by taking the top 20% of vital reference information from her Nutshell book, augmenting it judiciously, cross-referencing everything, and organizing it according to the most com

  2. Perl Pocket Reference

    CERN Document Server

    Vromans, Johan

    2011-01-01

    If you have a Perl programming question, you'll find the answer quickly in this handy, easy-to-use quick reference. The Perl Pocket Reference condenses and organizes stacks of documentation down to the most essential facts, so you can find what you need in a heartbeat. Updated for Perl 5.14, the 5th edition provides a summary of Perl syntax rules and a complete list of operators, built-in functions, and other features. It's the perfect companion to O'Reilly's authoritative and in-depth Perl programming books, including Learning Perl, Programming Perl, and the Perl Cookbook..

  3. Electrical engineer's reference book

    CERN Document Server

    Jones, G R

    2013-01-01

    A long established reference book: radical revision for the fifteenth edition includes complete rearrangement to take in chapters on new topics and regroup the subjects covered for easy access to information.The Electrical Engineer's Reference Book, first published in 1945, maintains its original aims: to reflect the state of the art in electrical science and technology and cater for the needs of practising engineers. Most chapters have been revised and many augmented so as to deal properly with both fundamental developments and new technology and applications that have come to the fore since

  4. Python pocket reference

    CERN Document Server

    Lutz, Mark

    2010-01-01

    This is the book to reach for when you're coding on the fly and need an answer now. It's an easy-to-use reference to the core language, with descriptions of commonly used modules and toolkits, and a guide to recent changes, new features, and upgraded built-ins -- all updated to cover Python 3.X as well as version 2.6. You'll also quickly find exactly what you need with the handy index. Written by Mark Lutz -- widely recognized as the world's leading Python trainer -- Python Pocket Reference, Fourth Edition, is the perfect companion to O'Reilly's classic Python tutorials, also written by Mark

  5. CSS Pocket Reference

    CERN Document Server

    Meyer, Eric A

    2007-01-01

    They say that good things come in small packages, and it's certainly true for this edition of CSS Pocket Reference. Completely revised and updated to reflect the latest Cascading Style Sheet specifications in CSS 2.1, this indispensable little book covers the most essential information that web designers and developers need to implement CSS effectively across all browsers. Inside, you'll find: A short introduction to the key concepts of CSS A complete alphabetical reference to all CSS 2.1 selectors and properties A chart displaying detailed information about CSS support for every style ele

  6. bash Quick Reference

    CERN Document Server

    Robbins, Arnold

    2008-01-01

    In this quick reference, you'll find everything you need to know about the bash shell. Whether you print it out or read it on the screen, this PDF gives you the answers to the annoying questions that always come up when you're writing shell scripts: What characters do you need to quote? How do you get variable substitution to do exactly what you want? How do you use arrays? It's also helpful for interactive use. If you're a Unix user or programmer, or if you're using bash on Windows, you'll find this quick reference indispensable.

  7. JDBC Pocket Reference

    CERN Document Server

    Bales, Donald

    2003-01-01

    JDBC--the Java Database Connectivity specification--is a complex set of application programming interfaces (APIs) that developers need to understand if they want their Java applications to work with databases. JDBC is so complex that even the most experienced developers need to refresh their memories from time to time on specific methods and details. But, practically speaking, who wants to stop and thumb through a weighty tutorial volume each time a question arises? The answer is the JDBC Pocket Reference, a data-packed quick reference that is both a time-saver and a lifesaver. The JDBC P

  8. Report on the geo-environmental inquiry project, central and eastern Europe

    NARCIS (Netherlands)

    Mattig, U.; Mulder, E.F.J. de

    1998-01-01

    The Commission on Geological Sciences for Environmental Planning (COGEOENVIRONMENT) of IUGS and UNESCO have initiated a joint project to develop a worldwide data base on earthscience-related environmental problems and to assess which geoscientific information is available locally for prevention, pre

  9. Geo-Environmental Change and the United States Military: How History Can Inform Future Arctic Operations

    Science.gov (United States)

    2012-05-17

    NUMBER 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) Command and General Staff College 731 McClellan Avenue Fort Leavenworth, KS 66027... AFB , along with support from Allied nations, is what the United States has available to support military operations in the ―eastern Arctic‖ area. 302

  10. An Accurately Stable Thermo-Hydro-Mechanical Model for Geo-Environmental Simulations

    Science.gov (United States)

    Gambolati, G.; Castelletto, N.; Ferronato, M.

    2011-12-01

    In real-world applications involving complex 3D heterogeneous domains the use of advanced numerical algorithms is of paramount importance to stabily, accurately and efficiently solve the coupled system of partial differential equations governing the mass and the energy balance in deformable porous media. The present communication discusses a novel coupled 3-D numerical model based on a suitable combination of Finite Elements (FEs), Mixed FEs (MFEs), and Finite Volumes (FVs) developed with the aim at stabilizing the numerical solution. Elemental pressures and temperatures, nodal displacements and face normal Darcy and Fourier fluxes are the selected primary variables. Such an approach provides an element-wise conservative velocity field, with both pore pressure and stress having the same order of approximation, and allows for the accurate prediction of sharp temperature convective fronts. In particular, the flow-deformation problem is addressed jointly by FEs and MFEs and is coupled to the heat transfer equation using an ad hoc time splitting technique that separates the time temperature evolution into two partial differential equations, accounting for the convective and the diffusive contribution, respectively. The convective part is addressed by a FV scheme which proves effective in treating sharp convective fronts, while the diffusive part is solved by a MFE formulation. A staggered technique is then implemented for the global solution of the coupled thermo-hydro-mechanical problem, solving iteratively the flow-deformation and the heat transport at each time step. Finally, the model is successfully experimented with in realistic applications dealing with geothermal energy extraction and injection.

  11. References on Sustainable Buildings

    OpenAIRE

    2005-01-01

    This web site is developed with the aim to promote sustainable design and planning of buildings. Selected references including books, reports, audio/visual materials and journals are listed. Most of the materials can be found in the HKU Libraries. To facilitate retrieval, links are provided to the library catalogue system for further information and study.

  12. Reference-Dependent Sympathy

    Science.gov (United States)

    Small, Deborah A.

    2010-01-01

    Natural disasters and other traumatic events often draw a greater charitable response than do ongoing misfortunes, even those that may cause even more widespread misery, such as famine or malaria. Why is the response disproportionate to need? The notion of reference dependence critical to Prospect Theory (Kahneman & Tversky, 1979) maintains that…

  13. The Reference Encounter Model.

    Science.gov (United States)

    White, Marilyn Domas

    1983-01-01

    Develops model of the reference interview which explicitly incorporates human information processing, particularly schema ideas presented by Marvin Minsky and other theorists in cognitive processing and artificial intelligence. Questions are raised concerning use of content analysis of transcribed verbal protocols as methodology for studying…

  14. Selecting a Reference Object

    Science.gov (United States)

    Miller, Jared E.; Carlson, Laura A.; Hill, Patrick L.

    2011-01-01

    One way to describe the location of an object is to relate it to another object. Often there are many nearby objects, each of which could serve as a candidate to be the reference object. A common theoretical assumption is that features that make a given object salient relative to the candidate set are instrumental in determining which is selected.…

  15. Virtual Reference Services.

    Science.gov (United States)

    Brewer, Sally

    2003-01-01

    As the need to access information increases, school librarians must create virtual libraries. Linked to reliable reference resources, the virtual library extends the physical collection and library hours and lets students learn to use Web-based resources in a protected learning environment. The growing number of virtual schools increases the need…

  16. X Python reference manual

    NARCIS (Netherlands)

    Mullender, K.S.

    1995-01-01

    This document describes the built-in types, exceptions, and functions of the X windows extension to Python. It assumes basic knowledge about the Python language and access to the X windows documentation. For an informal introduction to the language, see the Python Tutorial. The Python Reference Manu

  17. Python library reference

    NARCIS (Netherlands)

    Rossum, G. van

    1995-01-01

    Python is an extensible, interpreted, object-oriented programming language. It supports a wide range of applications, from simple text processing scripts to interactive WWW browsers. While the Python Reference Manual describes the exact syntax and semantics of the language, it does not describe the

  18. Extending reference assembly models

    DEFF Research Database (Denmark)

    Church, Deanna M.; Schneider, Valerie A.; Steinberg, Karyn Meltz;

    2015-01-01

    The human genome reference assembly is crucial for aligning and analyzing sequence data, and for genome annotation, among other roles. However, the models and analysis assumptions that underlie the current assembly need revising to fully represent human sequence diversity. Improved analysis tools...

  19. International Geomagnetic Reference Field

    DEFF Research Database (Denmark)

    Finlay, Chris; Maus, S.; Beggan, C. D.

    2010-01-01

    The eleventh generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2009 by the International Association of Geomagnetism and Aeronomy Working Group V‐MOD. It updates the previous IGRF generation with a definitive main field model for epoch 2005.0, a main field...

  20. Synthetic growth reference charts

    NARCIS (Netherlands)

    Hermanussen, Michael; Stec, Karol; Aßmann, Christian; Meigen, Christof; Van Buuren, Stef

    2016-01-01

    Objectives: To reanalyze the between-population variance in height, weight, and body mass index (BMI), and to provide a globally applicable technique for generating synthetic growth reference charts. Methods: Using a baseline set of 196 female and 197 male growth studies published since 1831, common

  1. Role and Reference Grammar.

    Science.gov (United States)

    Van Valin, Robert D., Jr.

    This paper discusses Role and Reference Grammar (RRG), which is a structuralist-formalist theory of grammar. RRG grew out of an attempt to answer two fundamental questions: (1) what would linguistic theory look like if it were based on the analysis of Lakhota, Tagalog, and Dyirbal, rather than on the analysis of English?; and (2) how can the…

  2. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted

  3. Digital Reference Service.

    Science.gov (United States)

    Mon, Lorri

    2000-01-01

    Discusses the increasing demand for digital reference services from government Web sites via email, and describes a partnership between the Government Printing Office and the federal depository library at the University of Illinois at Chicago to create electronic access to the Department of State Foreign Affairs Network (DOSFAN). (Author/LRW)

  4. An Amharic Reference Grammar.

    Science.gov (United States)

    Leslau, Wolf

    This reference grammar presents a structural description of the orthography, phonology, morphology, and syntax of Amharic, the national language of Ethiopia. The Amharic material in this work, designed to prepare the student for speaking and reading the language, appears in both Amharic script and phonetic transcription. See ED 012 044-5 for the…

  5. Bio fuels. A comparative analysis; Biokraftstoffe. Eine vergleichende Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, Norbert; Henke, Jan; Klepper, Gernot

    2009-07-01

    The market for bio fuels is subject to very high dynamics worldwide. Due to the extreme rise of the prices of raw materials as well as due to the retrogressive tax reductions for bio fuels in Germany one hardly invests in bio fuels. Substantial changes are experienced in the markets for fossil raw materials. The prices for agrarian raw material used in this contribution originate from the years 2006 and 2007. The effects of clearly higher oil prices on the bio fuel market are described. The investigation under consideration also deals with criteria of sustainability. The contribution of the individual bio fuels to the reduction of greenhouse gases is analyzed. The costs resulting from this are numerated. This enables a well-established comparison in which less representative bio fuels such as bio methane, BtL fuels and cellulose ethanol also are included.

  6. Combustion characteristics and kinetics of bio-oil

    Institute of Scientific and Technical Information of China (English)

    Ruixia ZHANG; Zhaoping ZHONG; Yaji HUANG

    2009-01-01

    The combustion characteristics of bio-oils derived from rice husk and corn were studied by thermogravimetry analysis. According to the thermo-gravimetry (TG), differential thermogravimetry (DTG) and differential thermal analysis (DTA) curves of bio-oils in air and nitrogen atmosphere, we analyzed the combustion characteristics of different kinds of bio-oils in different atmospheres and worked out the combustion kinetics parameters of the bio-oil, providing reliable base data for the burning of bio-oil. The thermogravimetry indicated that the combustion process of bio-oil was divided into three stages. At the same time, the combustion process can be described by different order reaction models, and with the method of Coats-Redfern, the activation energy and frequency factor of different kinds of bio-oils were obtained.

  7. BioSharing: curated and crowd-sourced metadata standards, databases and data policies in the life sciences.

    Science.gov (United States)

    McQuilton, Peter; Gonzalez-Beltran, Alejandra; Rocca-Serra, Philippe; Thurston, Milo; Lister, Allyson; Maguire, Eamonn; Sansone, Susanna-Assunta

    2016-01-01

    BioSharing (http://www.biosharing.org) is a manually curated, searchable portal of three linked registries. These resources cover standards (terminologies, formats and models, and reporting guidelines), databases, and data policies in the life sciences, broadly encompassing the biological, environmental and biomedical sciences. Launched in 2011 and built by the same core team as the successful MIBBI portal, BioSharing harnesses community curation to collate and cross-reference resources across the life sciences from around the world. BioSharing makes these resources findable and accessible (the core of the FAIR principle). Every record is designed to be interlinked, providing a detailed description not only on the resource itself, but also on its relations with other life science infrastructures. Serving a variety of stakeholders, BioSharing cultivates a growing community, to which it offers diverse benefits. It is a resource for funding bodies and journal publishers to navigate the metadata landscape of the biological sciences; an educational resource for librarians and information advisors; a publicising platform for standard and database developers/curators; and a research tool for bench and computer scientists to plan their work. BioSharing is working with an increasing number of journals and other registries, for example linking standards and databases to training material and tools. Driven by an international Advisory Board, the BioSharing user-base has grown by over 40% (by unique IP address), in the last year thanks to successful engagement with researchers, publishers, librarians, developers and other stakeholders via several routes, including a joint RDA/Force11 working group and a collaboration with the International Society for Biocuration. In this article, we describe BioSharing, with a particular focus on community-led curation.Database URL: https://www.biosharing.org.

  8. 6th International Conference on Innovations in Bio-Inspired Computing and Applications

    CERN Document Server

    Abraham, Ajith; Krömer, Pavel; Pant, Millie; Muda, Azah

    2016-01-01

    This Volume contains the papers presented during the 6th International Conference on Innovations in Bio-Inspired Computing and Applications IBICA 2015 which was held in Kochi, India during December 16-18, 2015. The 51 papers presented in this Volume were carefully reviewed and selected. The 6th International Conference IBICA 2015 has been organized to discuss the state-of-the-art as well as to address various issues in the growing research field of Bio-inspired Computing which is currently one of the most exciting research areas, and is continuously demonstrating exceptional strength in solving complex real life problems. The Volume will be a valuable reference to researchers, students and practitioners in the computational intelligence field.

  9. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  10. Bio energy in Norway; Bioenergi i Noreg

    Energy Technology Data Exchange (ETDEWEB)

    Hamnaberg, Haavard; Sidelnikova, Maria

    2011-07-01

    The main conclusion in this report is that it is possible to make available about 14 TWh bio energy in Norway than what is used today to a charge that is located less than ca. 30 oere / kWh. Almost all this potential come from the forest and requires an increase in output up to the net sustained yield. Further 5 TWh may be available in the form of biogas at a cost that is both higher and have greater uncertainty than the fixed bio energy. It is set up a cost curve based on this work, which is quoted here. This reflects only the technical costs, and does not regard wages, commissions, taxes or fees. The value of alternative uses of biomass are not considered. The cost curve must therefore not be mixed with a supply curve. (eb)

  11. Stomatal Density and Bio-water Saving

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Bio-water saving is to increase water use efficiency of crops or crop yield per unit of water input. Plant water use efficiency is determined by photosynthesis and transpiration, for both of which stomata are crucial. Stomata are pores on leaf epidermis for both water and carbon dioxide fluxes that are controlled by two major factors: stomatal behavior and density. Stomatal behavior has been the focus of intensive research, while less attention has been paid to stomatal density. Recently, a number of genes controlling stomatal development have been identified. This review summarizes the recent progress on the genes regulating stomatal density, and discusses the role of stomatal density in plant water use efficiency and the possibility to increase plant water use efficiency, hence bio-water saving by genetically manipulating stomatal density.

  12. Maritime Claims Reference Manual

    Science.gov (United States)

    1990-07-12

    8217 75028.8’ 28 Isla Conica 51010.7’ 75015.5’ 29 Roca Santa Lucia 51037.0’ 75.21.0’ 30 Roca Galicia 52003.4’ 75009.0’ 31 Islotes Evangelistas 52023.6’ 75005.6...amendment to the Marine Space Act which, inter alia , deletes reference to Rotuma as an archipelago. Instead, the waters within the baselines are

  13. Electrical engineer's reference book

    CERN Document Server

    Laughton, M A

    1985-01-01

    Electrical Engineer's Reference Book, Fourteenth Edition focuses on electrical engineering. The book first discusses units, mathematics, and physical quantities, including the international unit system, physical properties, and electricity. The text also looks at network and control systems analysis. The book examines materials used in electrical engineering. Topics include conducting materials, superconductors, silicon, insulating materials, electrical steels, and soft irons and relay steels. The text underscores electrical metrology and instrumentation, steam-generating plants, turbines

  14. GDB Pocket Reference

    CERN Document Server

    Robbins, Arnold

    2009-01-01

    The GNU debugger is valuable for testing, fixing, and retesting software because it allows you to see exactly what's going on inside of a program as it's executing. This new pocket reference shows you how to specify a target for debugging, perform a careful examination to find the cause of program failure, and make quick changes for further testing. The guide covers several popular programming languages.

  15. Open SHMEM Reference Implementation

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-12

    OpenSHMEM is an effort to create a specification for a standardized API for parallel programming in the Partitioned Global Address Space. Along with the specification the project is also creating a reference implementation of the API. This implementation attempts to be portable, to allow it to be deployed in multiple environments, and to be a starting point for implementations targeted to particular hardware platforms. It will also serve as a springboard for future development of the API.

  16. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:

  17. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet

  18. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet

  19. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:

  20. Electroacoustical reference data

    CERN Document Server

    Eargle, John M

    2002-01-01

    The need for a general collection of electroacoustical reference and design data in graphical form has been felt by acousticians and engineers for some time. This type of data can otherwise only be found in a collection of handbooks. Therefore, it is the author's intention that this book serve as a single source for many electroacoustical reference and system design requirements. In form, the volume closely resembles Frank Massa's Acoustic Design Charts, a handy book dating from 1942 that has long been out of print. The basic format of Massa's book has been followed here: For each entry, graphical data are presented on the right page, while text, examples, and refer­ ences appear on the left page. In this manner, the user can solve a given problem without thumbing from one page to the next. All graphs and charts have been scaled for ease in data entry and reading. The book is divided into the following sections: A. General Acoustical Relationships. This section covers the behavior of sound transmis­ sion in...

  1. BioSAR Airborne Biomass Sensing System

    Energy Technology Data Exchange (ETDEWEB)

    Graham, R.L.; Johnson, P.

    2007-05-24

    This CRADA was developed to enable ORNL to assist American Electronics, Inc. test a new technology--BioSAR. BioSAR is a an airborne, low frequency (80-120 MHz {approx} FM radio frequencies) synthetic aperture radar (SAR) technology which was designed and built for NASA by ZAI-Amelex under Patrick Johnson's direction. At these frequencies, leaves and small branches are nearly transparent and the majority of the energy reflected from the forest and returned to the radar is from the tree trunks. By measuring the magnitude of the back scatter, the volume of the tree trunk and therefore the biomass of the trunks can be inferred. The instrument was successfully tested on tropical rain forests in Panama. Patrick Johnson, with American Electronics, Inc received a Phase II SBIR grant from DOE Office of Climate Change to further test and refine the instrument. Mr Johnson sought ORNL expertise in measuring forest biomass in order for him to further validate his instrument. ORNL provided ground truth measurements of forest biomass at three locations--the Oak Ridge Reservation, Weyerhaeuser Co. commercial pine plantations in North Carolina, and American Energy and Power (AEP) Co. hardwood forests in southern Ohio, and facilitated flights over these forests. After Mr. Johnson processed the signal data from BioSAR instrument, the processed data were given to ORNL and we attempted to derive empirical relationships between the radar signals and the ground truth forest biomass measurements using standard statistical techniques. We were unsuccessful in deriving such relationships. Shortly before the CRADA ended, Mr Johnson discovered that FM signal from local radio station broadcasts had interfered with the back scatter measurements such that the bulk of the signal received by the BioSAR instrument was not backscatter from the radar but rather was local radio station signals.

  2. Utilization of palm oil sludge through pyrolysis for bio-oil and bio-char production.

    Science.gov (United States)

    Thangalazhy-Gopakumar, Suchithra; Al-Nadheri, Wail Mohammed Ahmed; Jegarajan, Dinesh; Sahu, J N; Mubarak, N M; Nizamuddin, S

    2015-02-01

    In this study, pyrolysis technique was utilized for converting palm oil sludge to value added materials: bio-oil (liquid fuel) and bio-char (soil amendment). The bio-oil yield obtained was 27.4±1.7 wt.% having a heating value of 22.2±3.7 MJ/kg and a negligible ash content of 0.23±0.01 wt.%. The pH of bio-oil was in alkaline region. The bio-char yielded 49.9±0.3 wt.%, which was further investigated for sorption efficiency by adsorbing metal (Cd(2+) ions) from water. The removal efficiency of Cd(2+) was 89.4±2%, which was almost similar to the removal efficiency of a commercial activated carbon. The adsorption isotherm was well described by Langmuir model. Therefore, pyrolysis is proved as an efficient tool for palm oil sludge management, where the waste was converted into valuable products.

  3. Beclometasone oral--DOR BioPharma.

    Science.gov (United States)

    2007-01-01

    orBec is an oral enteric-coated tablet formulation of the corticosteroid beclometasone, which has been developed by Enteron Pharmaceuticals, a subsidiary of Corporate Technology Development (now DOR BioPharma). orBec is being developed for the treatment of gastrointestinal graft-versus-host disease (GVHD) and an NDA has been filed in the US. DOR BioPharma has also filed an MAA in Europe for the same indication.orBec is designed to reduce the need for systemic immunosuppressive drugs, thereby improving the outcome of bone marrow and stem cell transplantation.DOR BioPharma may seek a marketing partner in the US and elsewhere for orBec in GVHD and will seek a partner for other potential indications of the drug.In December 2001, Corporate Technology Development was acquired by Endorex Corporation (now DOR BioPharma). In October 1998, Enteron Pharmaceuticals (DOR BioPharma) entered into an exclusive, worldwide, royalty bearing license agreement with George B. McDonald, MD, including the right to grant sublicenses, for the rights to the intellectual property and know-how relating to orBec. In January 2007, DOR BioPharma received $US3 million under a non-binding letter of intent from Sigma-Tau Pharmaceuticals. The agreement grants Sigma-Tau an exclusive right to negotiate terms and conditions for a possible business transaction or strategic alliance regarding orBec and potentially other DOR pipeline compounds until 1 March 2007. Under the terms of the agreement, Sigma-Tau purchased $US1 million of DOR's common stock, with an additional $US2 million paid in cash. If no agreement is reached by 1 March 2007, DOR will return the $US2 million to Sigma-Tau within 60 days. DOR BioPharma received an unsolicited proposal from Cell Therapeutics, Inc. to acquire DOR BioPharma in January 2007. Because of the non-binding agreement already signed with Sigma-Tau, DOR BioPharma's board of directors cannot consider Cell Therapeutics' merger proposal at this time. orBec has been filed for

  4. Engineering tissue with BioMEMS.

    Science.gov (United States)

    Borenstein, Jeffrey T; Vunjak-Novakovic, Gordana

    2011-11-01

    In summary, microfluidic-BioMEMS platforms are increasingly contributing to tissue engineering in many different ways. First, the accurate control of the cell environment in settings suitable for cell screening and with imaging compatibility is greatly advancing our ability to optimize cell sources for a variety of tissue-engineering applications. Second, the microfluidic technology is ideal for the formation of perfusable networks, either to study their stability and maturation or to use these networks as templates for engineering vascularized tissues. Third, the approaches based on microfluidic and BioMEMS devices enable engineering and the study of minimally functional modules of complex tissues, such as liver sinusoid, kidney nephron, and lung bronchiole. This brief article highlighted some of the unique advantages of this elegant technology using representative examples of tissue-engineering research. We focused on some of the universal needs of the area of tissue engineering: tissue vascularization, faithful recapitulation in vitro of functional units of our tissues and organs, and predictable selection and differentiation of stem cells that are being addressed using the power and versatility of microfluidic-BioMEMS platforms.

  5. Bio Gas Oil Production from Waste Lard

    Directory of Open Access Journals (Sweden)

    Jenő Hancsók

    2011-01-01

    Full Text Available Besides the second generations bio fuels, one of the most promising products is the bio gas oil, which is a high iso-paraffin containing fuel, which could be produced by the catalytic hydrogenation of different triglycerides. To broaden the feedstock of the bio gas oil the catalytic hydrogenation of waste lard over sulphided NiMo/Al2O3 catalyst, and as the second step, the isomerization of the produced normal paraffin rich mixture (intermediate product over Pt/SAPO-11 catalyst was investigated. It was found that both the hydrogenation and the decarboxylation/decarbonylation oxygen removing reactions took place but their ratio depended on the process parameters (T = 280–380∘C, P = 20–80 bar, LHSV = 0.75–3.0 h−1 and H2/lard ratio: 600 Nm3/m3. In case of the isomerization at the favourable process parameters (T = 360–370∘C, P = 40 –50 bar, LHSV = 1.0 h−1 and H2/hydrocarbon ratio: 400 Nm3/m3 mainly mono-branching isoparaffins were obtained. The obtained products are excellent Diesel fuel blending components, which are practically free of heteroatoms.

  6. Bio-Based Coatings for Paper Applications

    Directory of Open Access Journals (Sweden)

    Vibhore Kumar Rastogi

    2015-11-01

    Full Text Available The barrier resistance and wettability of papers are commonly controlled by the application of petroleum-based derivatives such as polyethylene, waxes and/or fluor- derivatives as coating. While surface hydrophobicity is improved by employing these polymers, they have become disfavored due to limitations in fossil-oil resources, poor recyclability, and environmental concerns on generated waste with lack of biodegradation. Alternatively, biopolymers including polysaccharides, proteins, lipids and polyesters can be used to formulate new pathways for fully bio-based paper coatings. However, difficulties in processing of most biopolymers may arise due to hydrophilicity, crystallization behavior, brittleness or melt instabilities that hinder a full exploitation at industrial scale. Therefore, blending with other biopolymers, plasticizers and compatibilizers is advantageous to improve the coating performance. In this paper, an overview of barrier properties and processing of bio-based polymers and their composites as paper coating will be discussed. In particular, recent technical advances in nanotechnological routes for bio-based nano- composite coatings will be summarized, including the use of biopolymer nanoparticles, or nanofillers such as nanoclay and nanocellulose. The combination of biopolymers along with surface modification of nanofillers can be used to create hierarchical structures that enhance hydrophobicity, complete barrier protection and functionalities of coated papers.

  7. Reference blindness: the influence of references on trust in Wikipedia

    NARCIS (Netherlands)

    Lucassen, Teun; Noordzij, Matthijs L.; Schraagen, Jan Maarten

    2011-01-01

    In this study we show the influence of references on trust in information. We changed the contents of reference lists of Wikipedia articles in such a way that the new references were no longer in any sense related to the topic of the article. Furthermore, the length of the reference list was varied.

  8. Method to upgrade bio-oils to fuel and bio-crude

    Science.gov (United States)

    Steele, Philip H; Pittman, Jr., Charles U; Ingram, Jr., Leonard L; Gajjela, Sanjeev; Zhang, Zhijun; Bhattacharya, Priyanka

    2013-12-10

    This invention relates to a method and device to produce esterified, olefinated/esterified, or thermochemolytic reacted bio-oils as fuels. The olefinated/esterified product may be utilized as a biocrude for input to a refinery, either alone or in combination with petroleum crude oils. The bio-oil esterification reaction is catalyzed by addition of alcohol and acid catalyst. The olefination/esterification reaction is catalyzed by addition of resin acid or other heterogeneous catalyst to catalyze olefins added to previously etherified bio-oil; the olefins and alcohol may also be simultaneously combined and catalyzed by addition of resin acid or other heterogeneous catalyst to produce the olefinated/esterified product.

  9. Bio-Chemicals Derived from Waste: Building on the Concept of a Bio-Refinery

    Directory of Open Access Journals (Sweden)

    Muddasar Habib

    2013-12-01

    Full Text Available The work presented here has looked into the thermal-conversion of wheat and barley spent grains (SG. Wheat fermentation was carried in the laboratory to get a mashed product while barley grain residues were sourced from a local brewing company. Pyrolysis carried at 460, 520 and 540 oC at ambient conditions of pressure in a bench scale fluidized bed reactor resulted in producing bio-oil, charcoal and non-condensable gases. These products were characterized by using the Gas Chromatography Mass Spectrometry (GC-MS, Differential Thermo-glavemetric Analysis (DTG, Elemental Analyzer (E.A and a Bomb Calorimeter. The final pyrolysis product analysis revealed that the bio-oil production yields and Higher Heating Value (HHV largely depended on the pyrolysis temperature and the sample type. In comparison with original raw grain samples, the analysis of thermally treated (pyrolysis spent grains revealed the presence of high carbon and low oxygen contents. Results gathered in this work have shown that high bio-crude-oil production yields can be obtained at 520 oC (53 and 37wt% bio-oil from wheat and barley SG. Pyrolysis of wheat and barley SG resulted in giving a Higher Heating Value (HHV of 21.80 and 21.86 MJ/kg at 540 and 460oC, which is considerably more in comparison to their virgin counterparts. This suggested route thus has a potential for further up-gradation of waste bio-mass for use as an intermediate fuel or as a raw material source for producing other bio-chemicals.

  10. Roaming Reference: Reinvigorating Reference through Point of Need Service

    Directory of Open Access Journals (Sweden)

    Kealin M. McCabe

    2011-11-01

    Full Text Available Roaming reference service was pursued as a way to address declining reference statistics. The service was staffed by librarians armed with iPads over a period of six months during the 2010-2011 academic year. Transactional statistics were collected in relation to query type (Research, Facilitative or Technology, location and approach (librarian to patron, patron to librarian or via chat widget. Overall, roaming reference resulted in an additional 228 reference questions, 67% (n=153 of which were research related. Two iterations of the service were implemented, roaming reference as a standalone service (Fall 2010 and roaming reference integrated with traditional reference desk duties (Winter 2011. The results demonstrate that although the Weller Library’s reference transactions are declining annually, they are not disappearing. For a roaming reference service to succeed, it must be a standalone service provided in addition to traditional reference services. The integration of the two reference models (roaming reference and reference desk resulted in a 56% decline in the total number of roaming reference questions from the previous term. The simple act of roaming has the potential to reinvigorate reference services as a whole, forcing librarians outside their comfort zones, allowing them to reach patrons at their point of need.

  11. Mechanical engineer's reference book

    CERN Document Server

    Parrish, A

    1973-01-01

    Mechanical Engineer's Reference Book: 11th Edition presents a comprehensive examination of the use of Systéme International d' Unités (SI) metrication. It discusses the effectiveness of such a system when used in the field of engineering. It addresses the basic concepts involved in thermodynamics and heat transfer. Some of the topics covered in the book are the metallurgy of iron and steel; screw threads and fasteners; hole basis and shaft basis fits; an introduction to geometrical tolerancing; mechanical working of steel; high strength alloy steels; advantages of making components as castings

  12. XSLT 10 Pocket Reference

    CERN Document Server

    Lenz, Evan

    2008-01-01

    XSLT is an essential tool for converting XML into other kinds of documents: HTML, PDF file, and many others. It's a critical technology for XML-based platforms such as Microsoft .NET, Sun Microsystems' Sun One, as well as for most web browsers and authoring tools. As useful as XSLT is, however, most people have a difficult time getting used to its peculiar characteristics. The ability to use advanced techniques depends on a clear and exact understanding of how XSLT templates work and interact. The XSLT 1.0 Pocket Reference from O'Reilly wants to make sure you achieve that level of understan

  13. Instrumentation reference book

    CERN Document Server

    Boyes, Walt

    2002-01-01

    Instrumentation is not a clearly defined subject, having a 'fuzzy' boundary with a number of other disciplines. Often categorized as either 'techniques' or 'applications' this book addresses the various applications that may be needed with reference to the practical techniques that are available for the instrumentation or measurement of a specific physical quantity or quality. This makes it of direct interest to anyone working in the process, control and instrumentation fields where these measurements are essential.* Comprehensive and authoritative collection of technical information* Writte

  14. Electronics engineer's reference book

    CERN Document Server

    Mazda, F F

    1989-01-01

    Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

  15. Xcode 5 developer reference

    CERN Document Server

    Wentk, Richard

    2014-01-01

    Design, code, and build amazing apps with Xcode 5 Thanks to Apple's awesome Xcode development environment, you can create the next big app for Macs, iPhones, iPads, or iPod touches. Xcode 5 contains gigabytes of great stuff to help you develop for both OS X and iOS devices - things like sample code, utilities, companion applications, documentation, and more. And with Xcode 5 Developer Reference, you now have the ultimate step-by-step guide to it all. Immerse yourself in the heady and lucrative world of Apple app development, see how to tame the latest features and functions, and find loads of

  16. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Manage-

  17. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Management,2001,37:661-675.2 Fernandez,M.,Kadiyska,Y.,&Suciu,D.,et al.SilkRoute:A framework for publishing

  18. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5th Ed.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Management,2001,37:661-675.

  19. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Management,2001,37:661-675.2 Fernandez.M

  20. Rails Pocket Reference

    CERN Document Server

    Berry, Eric

    2008-01-01

    Rails 2.1 brings a new level of stability and power to this acclaimed web development framework, but keeping track of its numerous moving parts is still a chore. Rails Pocket Reference offers you a painless alternative to hunting for resources online, with brief yet thorough explanations of the most frequently used methods and structures supported by Rails 2.1, along with key concepts you need to work through the framework's most tangled corners. Organized to help you quickly find what you need, this book will not only get you up to speed on how Rails works, it also provides a handy referenc

  1. VBScript pocket reference

    CERN Document Server

    Lomax, Paul; Petrusha, Ron

    2008-01-01

    Microsoft's Visual Basic Scripting Edition (VBScript), a subset of Visual Basic for Applications, is a powerful language for Internet application development, where it can serve as a scripting language for server-side, client-side, and system scripting. Whether you're developing code for Active Server Pages, client-side scripts for Internet Explorer, code for Outlook forms, or scripts for Windows Script Host, VBScript Pocket Reference will be your constant companion. Don't let the pocket-friendly format fool you. Based on the bestsellingVBScript in a Nutshell, this small book details every V

  2. Computing Pathways in Bio-Models Derived from Bio-Science Text Sources

    DEFF Research Database (Denmark)

    Andreasen, Troels; Bulskov, Henrik; Nilsson, Jørgen Fischer

    2014-01-01

    This paper outlines a system, OntoScape, serving to accomplish complex inference tasks on knowledge bases and bio-models derived from life-science text corpora. The system applies so-called natural logic, a form of logic which is readable for humans. This logic affords ontological representations...... of complex terms appearing in the text sources. Along with logical propositions, the system applies a semantic graph representation facilitating calculation of bio-pathways. More generally, the system aords means of query answering appealing to general and domain specic inference rules....

  3. Computing Pathways in Bio-Models Derived from Bio-Science Text Sources

    DEFF Research Database (Denmark)

    Andreasen, Troels; Bulskov, Henrik; Nilsson, Jørgen Fischer;

    2015-01-01

    This paper outlines a system, OntoScape, serving to accomplish complex inference tasks on knowledge bases and bio-models derived from life-science text corpora. The system applies so-called natural logic, a form of logic which is readable for humans. This logic affords ontological representations...... of complex terms appearing in the text sources. Along with logical propositions, the system applies a semantic graph representation facilitating calculation of bio-pathways. More generally, the system aords means of query answering appealing to general and domain specic inference rules....

  4. ¿Bioética narrativa o narrativa bioética?

    OpenAIRE

    Miguel Kottow

    2016-01-01

    Desde los inicios de la bioética, se presenta y agudiza el conflicto entre biomedicina científica basada en evidencia y la bioética preocupada de valores personales y participativos expresados en el consentimiento informado. La medicina terapéutica y la investigación biomédica propician la participación autónoma de pacientes y probandos, la cual se expresa en la narrativa que destaca los valores existenciales de cada persona y el contexto social donde vive. Las humanidades médicas son convoca...

  5. Sensor employing internal reference electrode

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention concerns a novel internal reference electrode as well as a novel sensing electrode for an improved internal reference oxygen sensor and the sensor employing same.......The present invention concerns a novel internal reference electrode as well as a novel sensing electrode for an improved internal reference oxygen sensor and the sensor employing same....

  6. MULTIFUNCTIONAL NANO-BIO MATERIALS WITHIN CELLULAR MACHINERY.

    Science.gov (United States)

    Rozhkova, E A; Ulasov, I V; Kim, D-H; Dimitrijevic, N M; Novosad, V; Bader, S D; Lesniak, M S; Rajh, T

    2011-08-01

    Functional nanoscale materials that possess specific physical or chemical properties can leverage energy transduction in vivo. Once these materials integrate with biomolecules they combine physical properties of inorganic material and the biorecognition capabilities of bio-organic moieties. Such nano-bio hybrids can be interfaced with living cells, the elementary functional units of life. These nano-bio systems are capable of bio-manipulation or actuation via altering intracellular biochemical pathways. Thus, nano-bio conjugates are appealing for a wide range of applications from the life sciences and nanomedicine to catalysis and clean energy production. Here we highlight recent progress in our efforts to develop smart nano-bio hybrid materials, and to study their performance within cellular machinery under application of external stimuli, such as light or magnetic fields.

  7. Coal data: A reference

    Energy Technology Data Exchange (ETDEWEB)

    1995-02-01

    This report, Coal Data: A Reference, summarizes basic information on the mining and use of coal, an important source of energy in the US. This report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ``Supplemental Figures and Tables`` contains statistics, graphs, maps, and other illustrations that show trends, patterns, geographic locations, and similar coal-related information. The section ``Coal Terminology and Related Information`` provides additional information about terms mentioned in the text and introduces some new terms. The last edition of Coal Data: A Reference was published in 1991. The present edition contains updated data as well as expanded reviews and additional information. Added to the text are discussions of coal quality, coal prices, unions, and strikes. The appendix has been expanded to provide statistics on a variety of additional topics, such as: trends in coal production and royalties from Federal and Indian coal leases, hours worked and earnings for coal mine employment, railroad coal shipments and revenues, waterborne coal traffic, coal export loading terminals, utility coal combustion byproducts, and trace elements in coal. The information in this report has been gleaned mainly from the sources in the bibliography. The reader interested in going beyond the scope of this report should consult these sources. The statistics are largely from reports published by the Energy Information Administration.

  8. Prototyping Bio-Nanorobots using Molecular Dynamics Simulation

    OpenAIRE

    Hamdi, Mustapha; Sharma, Gaurav; Ferreira, A.; Mavroidis, Constantinos

    2005-01-01

    Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/5920); International audience; This paper presents a molecular mechanics study using a molecular dynamics software (NAMD) coupled to virtual reality (VR) techniques for intuitive Bio-NanoRobotic prototyping. Using simulated Bio-Nano environments in VR, the operator can design and characterize through physical simulation and 3-D visualization the behavior of Bio-NanoRobotic components and structures. The mai...

  9. Bio-Based Polymers with Potential for Biodegradability

    OpenAIRE

    Thomas F. Garrison; Amanda Murawski; Rafael L. Quirino

    2016-01-01

    A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid) (PLA), wi...

  10. INVESTIGATIONS ON SEWAGE TREATMENT PROCESS USING COMBINED BIO-OXIDIZERS

    Directory of Open Access Journals (Sweden)

    V. N. Jaromsky

    2010-01-01

    Full Text Available The paper presents results of investigations on process of aerobic waste water treatment with combined bio-oxidizers at milk processing enterprises. It has been shown that attached biocenosis, free-floating biocenosis and also bio-module rotation frequency  have exerted a significant influence on the process of an aerobic sewage treatment. It has been established that combined bio-oxidizers can be used for cleaning high concentrated waste water at the enterprises of food industry.

  11. INVESTIGATIONS ON SEWAGE TREATMENT PROCESS USING COMBINED BIO-OXIDIZERS

    OpenAIRE

    V. N. Jaromsky; E. I. Mihnevich

    2010-01-01

    The paper presents results of investigations on process of aerobic waste water treatment with combined bio-oxidizers at milk processing enterprises. It has been shown that attached biocenosis, free-floating biocenosis and also bio-module rotation frequency  have exerted a significant influence on the process of an aerobic sewage treatment. It has been established that combined bio-oxidizers can be used for cleaning high concentrated waste water at the enterprises of food industry.

  12. Alveolar ridge augmentation in rats by Bio-Oss

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1991-01-01

    The purpose of the study was to examine if Bio-Oss initiated osteoinduction or osteoconduction when implanted into rats. Sintered and unsintered granules of the anorganic bovine bone Bio-Oss was implanted subperiosteally for alveolar ridge augmentation purposes and heterotopically in the abdominal...... muscles of rats. Light microscopic evaluation revealed no osteoinduction or osteoconduction in connection with sintered or unsintered Bio-Oss. A foreign body reaction was observed around both forms....

  13. BioC implementations in Go, Perl, Python and Ruby.

    Science.gov (United States)

    Liu, Wanli; Islamaj Doğan, Rezarta; Kwon, Dongseop; Marques, Hernani; Rinaldi, Fabio; Wilbur, W John; Comeau, Donald C

    2014-01-01

    As part of a communitywide effort for evaluating text mining and information extraction systems applied to the biomedical domain, BioC is focused on the goal of interoperability, currently a major barrier to wide-scale adoption of text mining tools. BioC is a simple XML format, specified by DTD, for exchanging data for biomedical natural language processing. With initial implementations in C++ and Java, BioC provides libraries of code for reading and writing BioC text documents and annotations. We extend BioC to Perl, Python, Go and Ruby. We used SWIG to extend the C++ implementation for Perl and one Python implementation. A second Python implementation and the Ruby implementation use native data structures and libraries. BioC is also implemented in the Google language Go. BioC modules are functional in all of these languages, which can facilitate text mining tasks. BioC implementations are freely available through the BioC site: http://bioc.sourceforge.net. Database URL: http://bioc.sourceforge.net/

  14. Vertical One-Dimensional Photonic Crystal Platforms for Label-Free (Bio)Sensing: Towards Drop-And- Measure Applications

    CERN Document Server

    Barillaro, Giuseppe

    2015-01-01

    In this work, all-silicon, integrated optofluidic platforms, fabricated by electrochemical micromachining technology, making use of vertical, one-dimensional high-aspect- ratio photonic crystals for flow-through (bio)sensing applications are reviewed. The potential of such platforms for point-of-care applications is discussed for both pressure-driven and capillarity- driven operations with reference to refractometry and biochemical sensing.

  15. The OTIS Reference Manual

    CERN Document Server

    Deppe, H; Trunk, U; Uwer, U

    2008-01-01

    This document describes the port definitions, electrical specifications, modes of operation and programming sequences of the OTIS TDC. The chip is developed for the Outer Tracker of the LHCb experiment. OTIS1.0 is the first full-scale prototype of this 32 channel TDC and has been submitted in April 2002 in a standard 0.25µm CMOS process. Within the clock driven architecture of the chip a DLL provides the reference for the drift time measurement. The drift time data of every channel is stored in the pipeline memory until a trigger decision arrives. A control unit provides memory and trigger management and handles data transmission to the subsequent DAQ stage. The latest chip version is OTIS1.3.

  16. Magnetohydrodynamic inertial reference system

    Science.gov (United States)

    Eckelkamp-Baker, Dan; Sebesta, Henry R.; Burkhard, Kevin

    2000-07-01

    Optical platforms increasingly require attitude knowledge and optical instrument pointing at sub-microradian accuracy. No low-cost commercial system exists to provide this level of accuracy for guidance, navigation, and control. The need for small, inexpensive inertial sensors, which may be employed in pointing control systems that are required to satisfy angular line-of-sight stabilization jitter error budgets to levels of 1-3 microradian rms and less, has existed for at least two decades. Innovations and evolutions in small, low-noise inertial angular motion sensor technology and advances in the applications of the global positioning system have converged to allow improvement in acquisition, tracking and pointing solutions for a wide variety of payloads. We are developing a small, inexpensive, and high-performance inertial attitude reference system that uses our innovative magnetohydrodynamic angular rate sensor technology.

  17. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Management,2001,37:661-675.2 Fernandez,M.,Kadiyska,Y.,&Suciu,D.,et al.SilkRoute:A framework for publishing relational data in XML.ACM Transactions on Database Systems,2002,27(4):438-493.

  18. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Management,2001,37:661-675.2 Fernandez,M.,Kadiyska,Y.,&Suciu,D.,et al.SilkRoute:A framework for publishing relational data in XML.ACM Transactions on Database Systems,2002,27(4):438-493.

  19. Reference Citation Format

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The format for citations in text and for bibliographic references follows the Publication Manual of the American Psychological Association(5thEd.,2001)and GB/T 7714-2005.The citation of printed word should be ordered in number as it appears in the text of the submitted article.For journal article1 Goodrum,A.A.,McCain,K.W.,&Lawrence,S.,et al.Scholarly publishing in the Internet age:A citation analysis of computer science literature.Information Processing and Management,2001,37:661-675.2 Fernandez,M.,Kadiyska,Y.,&Suciu,D.,et al.SilkRoute:A framework for publishing relational data in XML.ACM Transactions on Database Systems,2002,27(4):438-493.

  20. Tank characterization reference guide

    Energy Technology Data Exchange (ETDEWEB)

    De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-09-01

    Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

  1. Bio-inspiring cyber security and cloud services trends and innovations

    CERN Document Server

    Kim, Tai-Hoon; Kacprzyk, Janusz; Awad, Ali

    2014-01-01

    This volume presents recent research in cyber security, and reports how organizations can gain competitive advantages by applying the different security techniques in real-world scenarios. The volume provides reviews of cutting–edge technologies, algorithms, applications and insights for bio-inspiring cyber security-based systems. The book will be a valuable companion and comprehensive reference for both postgraduate and senior undergraduate students who are taking a course in cyber security. The volume is organized in self-contained chapters to provide greatest reading flexibility.  

  2. A invenção da bioética

    Directory of Open Access Journals (Sweden)

    Gerson

    2014-12-01

    Full Text Available A Bioética está em permanente expansão no que se refere às novas questões morais e jurídicas, mas ainda é incipiente em sua fundamentação jurídico- filosófica. A noção de bioética apresenta-se como uma ética nova para um novo homem, onde as noções da ética clássica parecem não justificar as exigências das novas questões colocadas pela bioética. Este trabalho aborda a questão das novas tecnologias e de seus limites éticos e jurídicos. Para tanto, avalia-se as contribuições de dois dos mais importantes jus-filósofos contemporâneos sobre o tema, Jürgen Habermas e Ronald Dworkin, e um possível diálogo destes dois últimos com aquele que foi um dos fundadores da ética clássica, Aristóteles.

  3. Green engineering: Green composite material, biodiesel from waste coffee grounds, and polyurethane bio-foam

    Science.gov (United States)

    Cheng, Hsiang-Fu

    In this thesis we developed several ways of producing green materials and energy resources. First, we developed a method to fabricate natural fibers composites, with the purpose to develop green textile/woven composites that could potentially serve as an alternative to materials derived from non-renewable sources. Flax and hemp fabrics were chosen because of their lightweight and exceptional mechanical properties. To make these textile/woven composites withstand moist environments, a commercially available marine resin was utilized as a matrix. The tensile, three-point bending, and edgewise compression strengths of these green textile/woven composites were measured using ASTM protocols. Secondly, we developed a chemical procedure to obtain oil from waste coffee grounds; we did leaching and liquid extractions to get liquid oil from the solid coffee. This coffee oil was used to produce bio-diesel that could be used as a substitute for petroleum-based diesel. Finally, polyurethane Bio-foam formation utilized glycerol that is the by-product from the biodiesel synthesis. A chemical synthesis procedure from the literature was used as the reference system: a triol and isocynate are mixed to produce polyurethane foam. Moreover, we use a similar triol, a by-product from bio-diesel synthesis, to reproduce polyurethane foam.

  4. Continuous Time Level Crossing Sampling ADC for Bio-Potential Recording Systems.

    Science.gov (United States)

    Tang, Wei; Osman, Ahmad; Kim, Dongsoo; Goldstein, Brian; Huang, Chenxi; Martini, Berin; Pieribone, Vincent A; Culurciello, Eugenio

    2013-06-01

    In this paper we present a fixed window level crossing sampling analog to digital convertor for bio-potential recording sensors. This is the first proposed and fully implemented fixed window level crossing ADC without local DACs and clocks. The circuit is designed to reduce data size, power, and silicon area in future wireless neurophysiological sensor systems. We built a testing system to measure bio-potential signals and used it to evaluate the performance of the circuit. The bio-potential amplifier offers a gain of 53 dB within a bandwidth of 200 Hz-20 kHz. The input-referred rms noise is 2.8 µV. In the asynchronous level crossing ADC, the minimum delta resolution is 4 mV. The input signal frequency of the ADC is up to 5 kHz. The system was fabricated using the AMI 0.5 µm CMOS process. The chip size is 1.5 mm by 1.5 mm. The power consumption of the 4-channel system from a 3.3 V supply is 118.8 µW in the static state and 501.6 µW with a 240 kS/s sampling rate. The conversion efficiency is 1.6 nJ/conversion.

  5. Bio-energy. Innovators talking; Bio-energie. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on bio-energy [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar bio-energie.

  6. Bio-objects and the media: the role of communication in bio-objectification processes.

    Science.gov (United States)

    Maeseele, Pieter; Allgaier, Joachim; Martinelli, Lucia

    2013-06-01

    The representation of biological innovations in and through communication and media practices is vital for understanding the nature of "bio-objects" and the process we call "bio-objectification." This paper discusses two ideal-typical analytical approaches based on different underlying communication models, ie, the traditional (science- and media-centered) and media sociological (a multi-layered process involving various social actors in defining the meanings of scientific and technological developments) approach. In this analysis, the latter is not only found to be the most promising approach for understanding the circulation, (re)production, and (re)configuration of meanings of bio-objects, but also to interpret the relationship between media and science. On the basis of a few selected examples, this paper highlights how media function as a primary arena for the (re)production and (re)configuration of scientific and biomedical information with regards to bio-objects in the public sphere in general, and toward decision-makers, interest groups, and the public in specific.

  7. Assimilation of Bio-Optical Properties into Coupled Physical, Bio-Optical Coastal Model

    Science.gov (United States)

    2013-01-01

    analysis (updated) fields for the bio-optical model state variables are derived from: Proc. of SPIE Vol. 8724 87240E-3 Downloaded From: http...proceedings.spiedigitallibrary.org/ on 07/11/2013 Terms of Use: http://spiedl.org/terms ),XY(XX fofa HK −+= aX fX oY (1) where is vector of the

  8. Bio-Terrorism Threat and Casualty Prevention

    Energy Technology Data Exchange (ETDEWEB)

    NOEL,WILLIAM P.

    2000-01-01

    The bio-terrorism threat has become the ''poor man's'' nuclear weapon. The ease of manufacture and dissemination has allowed an organization with only rudimentary skills and equipment to pose a significant threat with high consequences. This report will analyze some of the most likely agents that would be used, the ease of manufacture, the ease of dissemination and what characteristics of the public health response that are particularly important to the successful characterization of a high consequence event to prevent excessive causalities.

  9. Complex biological and bio-inspired systems

    Energy Technology Data Exchange (ETDEWEB)

    Ecke, Robert E [Los Alamos National Laboratory

    2009-01-01

    The understanding and characterization ofthe fundamental processes of the function of biological systems underpins many of the important challenges facing American society, from the pathology of infectious disease and the efficacy ofvaccines, to the development of materials that mimic biological functionality and deliver exceptional and novel structural and dynamic properties. These problems are fundamentally complex, involving many interacting components and poorly understood bio-chemical kinetics. We use the basic science of statistical physics, kinetic theory, cellular bio-chemistry, soft-matter physics, and information science to develop cell level models and explore the use ofbiomimetic materials. This project seeks to determine how cell level processes, such as response to mechanical stresses, chemical constituents and related gradients, and other cell signaling mechanisms, integrate and combine to create a functioning organism. The research focuses on the basic physical processes that take place at different levels ofthe biological organism: the basic role of molecular and chemical interactions are investigated, the dynamics of the DNA-molecule and its phylogenetic role are examined and the regulatory networks of complex biochemical processes are modeled. These efforts may lead to early warning algorithms ofpathogen outbreaks, new bio-sensors to detect hazards from pathomic viruses to chemical contaminants. Other potential applications include the development of efficient bio-fuel alternative-energy processes and the exploration ofnovel materials for energy usages. Finally, we use the notion of 'coarse-graining,' which is a method for averaging over less important degrees of freedom to develop computational models to predict cell function and systems-level response to disease, chemical stress, or biological pathomic agents. This project supports Energy Security, Threat Reduction, and the missions of the DOE Office of Science through its efforts to

  10. Biot Savart Law integrator BioSaw

    CERN Document Server

    Äkäslompolo, Simppa; Kurki-Suonio, Taina

    2015-01-01

    This contribution documents the methods used in the BioSaw code. The code is inteded to be a flexible tool for calculating magnetic fields due to coils in magnetic confinement fusion devices. It assumes the conductors are infinitesimally thin and can be described as either point sequences or circular coils. The code can calculate both the magnetic field as well as the vector potential due to the coils. The fields can be reduced very near the coils to avoid singular behaviour caused by the thin conductor approximation.

  11. Bioraffinerie and Knowledge Based BioEconomy

    OpenAIRE

    2016-01-01

    La question de la transition vers un paradigme de l′usage des ressources renouvelables se traduit par des efforts particuliers de mobilisation de la recherche ; cette mobilisation se déploie dans des domaines divers (énergie solaire, éolienne, substituts du carbone fossile par du carbone renouvelable en énergie, production de carburants liquides et chimie). La volonté de substitution liée à cet effort de production de carbone renouvelable conduit à s′intéresser au domaine spécifique de la bio...

  12. Bio-energy status document 2012; Statusdocument bio-energie 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bles, M.; Schepers, B.L.; Van Grinsven, A.H.; Bergsma, G.C.; Croezen, H.C.

    2013-05-15

    In 2012 bio-energy contributed over 71 PJ to the Dutch energy supply, a rise of almost 2 PJ over 2011. This means that 75% of the renewable energy consumed in the Netherlands is now derived from biomass. The growth is due mainly to the increase in the mandatory biotransport fuel percentage from 4.25% to 4.5%. The use of energy from 'other biomass combustion' (incl. paper sludge, green waste and chicken excrement) recovered to the level of 2010, following a marked drop in 2011 due to plant maintenance, termination of the MEP ('Environmental Quality of Power Generation') subsidy scheme and high biomass prices. At large power stations there was a considerable decrease in co-incineration of biomass because of incidents (a fire at the Nijmegen coal-fired plant) and a maintenance backlog (at the Amer power station). These are some of the results reported in the 'Bio-energy status document 2012', prepared by CE Delft for NL Agency. In addition to a review and characterisation of the current situation, the report contains an update on government policies on bio-energy and a review of the sources and sustainability of the biomass used in the Netherlands [Dutch] De bijdrage van bio-energie aan de Nederlandse energievoorziening bedroeg in 2012 ruim 71 PJ, een stijging van bijna 2 PJ ten opzichte van 2011. Daarmee is 75% van het verbruik van hernieuwbare energie in Nederland afkomstig van bio-energie. De stijging wordt vooral veroorzaakt door de oplopende bijmengplicht van biotransportbrandstoffen van 4,25% naar 4,5%. Verbruik van energie uit 'overige biomassaverbranding' (o.a. papierslib, groenafval en kippenmest) herstelde zicht tot het niveau van 2010, na een forse daling in 2011 door onderhoud aan installaties, afloop van MEP-subsidies en hoge prijzen van biomassa. Het bij- en meestoken van biomassa in grote elektriciteitscentrales daalde juist aanzienlijk door calamiteiten en uitloop van onderhoud (brand kolencentrale bij Nijmegen

  13. BioDARA: Data Summarization Approach to Extracting Bio-Medical Structuring Information

    Directory of Open Access Journals (Sweden)

    Chung S. Kheau

    2011-01-01

    Full Text Available Problem statement: Due to the ever growing amount of biomedical datasets stored in multiple tables, Information Extraction (IE from these datasets is increasingly recognized as one of the crucial technologies in bioinformatics. However, for IE to be practically applicable, adaptability of a system is crucial, considering extremely diverse demands in biomedical IE application. One should be able to extract a set of hidden patterns from these biomedical datasets at low cost. Approach: In this study, a new method is proposed, called Bio-medical Data Aggregation for Relational Attributes (BioDARA, for automatic structuring information extraction for biomedical datasets. BioDARA summarizes biomedical data stored in multiple tables in order to facilitate data modeling efforts in a multi-relational setting. BioDARA has the advantages or capabilities to transform biomedical data stored in multiple tables or databases into a Vector Space model, summarize biomedical data using the Information Retrieval theory and finally extract frequent patterns that describe the characteristics of these biomedical datasets. Results: the results show that data summarization performed by DARA, can be beneficial in summarizing biomedical datasets in a complex multi-relational environment, in which biomedical datasets are stored in a multi-level of one-to-many relationships and also in the case of datasets stored in more than one one-to-many relationships with non-target tables. Conclusion: This study concludes that data summarization performed by BioDARA, can be beneficial in summarizing biomedical datasets in a complex multi-relational environment, in which biomedical datasets are stored in a multi-level of one-to-many relationships.

  14. Bio THELYS: A new sludge reduction process

    Energy Technology Data Exchange (ETDEWEB)

    Chauzy, Julien; Cretenot, Didier; Patria, Lucie; Fernandes, Paulo; Sauvegrain, Patrick; Levasseur, Jean-Pierre

    2003-07-01

    New technologies for reducing the sludge production of municipal or industrial WWTP have been appeared during the last few years. One of these innovative processes, Bio THELYS, consists in enhancing the biodegradability of sludge by a stage of thermal hydrolysis. The hydrolysed sludge could then be sent upstream to a biological step either aerobic or anaerobic. The objective is to increase the global mineralisation of the pollution entering the WWTP in order to decrease the waste leaving it, i.e. mainly the sludge. A 2500 population equivalent prototype was installed on a WWTP, in Champagne - France. Thermal hydrolysis is carried out under a temperature of 150-185{sup o}C, a pressure of 10-15 bar with an hydraulic retention time of 30-60 minutes. Thermal hydrolysis is implemented on a secondary recycling loop on the biological basin. Trials started in 1999 and are still on operation. A close monitoring of the WWTP was set up focusing especially on sludge characteristics, treated water quality, yield of sludge production reduction and plant operation. Bio THELYS could achieve a reduction in sludge production up to 70% on the plant. (author)

  15. Bioética de los principios

    Directory of Open Access Journals (Sweden)

    Juan José Pérez-Soba Díez del Corral

    2008-01-01

    Full Text Available La bioética ha surgido del problema de la invasión de una mentalidad técnica en una práctica ética pues concierne a la vida humana. De aquí emerge la dificultad de plantear límites morales a esta práctica, ya que parecen exteriores a su racionalidad. La bioética de los principios ha tomado estos de una racionalidad teleológica con una corrección posterior autonomista. Esto produce una divergencia que manifiesta una debilidad epistemológica y una dificultad de comprensión moral. Esto es especialmente evidente en la formulación del principio de autonomía, del que se quita la impronta ética que tenia en Kant. Se ha de postular una nueva racionalidad ética que conlleva una reformulación que parta de principios éticos en conexión con las experiencias éticas básicas.

  16. Preliminary reference Earth model

    Science.gov (United States)

    Dziewonski, Adam M.; Anderson, Don L.

    1981-06-01

    A large data set consisting of about 1000 normal mode periods, 500 summary travel time observations, 100 normal mode Q values, mass and moment of inertia have been inverted to obtain the radial distribution of elastic properties, Q values and density in the Earth's interior. The data set was supplemented with a special study of 12 years of ISC phase data which yielded an additional 1.75 × 10 6 travel time observations for P and S waves. In order to obtain satisfactory agreement with the entire data set we were required to take into account anelastic dispersion. The introduction of transverse isotropy into the outer 220 km of the mantle was required in order to satisfy the shorter period fundamental toroidal and spheroidal modes. This anisotropy also improved the fit of the larger data set. The horizontal and vertical velocities in the upper mantle differ by 2-4%, both for P and S waves. The mantle below 220 km is not required to be anisotropic. Mantle Rayleigh waves are surprisingly sensitive to compressional velocity in the upper mantle. High S n velocities, low P n velocities and a pronounced low-velocity zone are features of most global inversion models that are suppressed when anisotropy is allowed for in the inversion. The Preliminary Reference Earth Model, PREM, and auxiliary tables showing fits to the data are presented.

  17. Reference change values.

    Science.gov (United States)

    Fraser, Callum G

    2011-09-30

    Reference change values (RCV) provide objective tools for assessment of the significance of differences in serial results from an individual. The concept is simple and the calculation easy, since all laboratories know their analytical imprecision (CV(A)) and estimates of within-subject biological variation (CV(I)) are available for a large number of quantities. Generally, CV(I) are constant over time, geography, methodology and in health and chronic stable disease. The formula is RCV=2(1/2) · Z · (CV(A)(2) + CV(I)(2))(1/2), where Z is the number of standard deviations appropriate to the probability. Correct interpretation of the semantics describing the clinical use of RCV is vital for selection of the Z-score. Many quantities of clinically importance exist for which good estimates of RCV are unavailable. Derivation of CV(I) may be difficult for such quantities: flair and imagination are required in selecting populations with chronic but stable disease on whom CV(I) can be determined. RCV can be used for delta-checking and auto-verification and laboratory information management systems (LIMS) can be adapted to do this. Recently, log-normal transformation to obtain unidirectional RCV has been used. Gaps in knowledge of RCV still require filling since the need for measures of change is clearly expressed in guidelines.

  18. Sensor Characteristics Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

    2013-04-01

    The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

  19. The Herschel Reference Survey

    CERN Document Server

    Boselli, A; Cortese, L; Bendo, G; Chanial, P; Buat, V; Davies, J; Auld, R; Rigby, E; Baes, M; Barlow, M; Bock, J; Bradford, M; Castro-Rodriguez, N; Charlot, S; Clements, D; Cormier, D; Dwek, E; Elbaz, D; Galametz, M; Galliano, F; Gear, W; Glenn, J; Gomez, H; Griffin, M; Hony, S; Isaak, K; Levenson, L; Lu, N; Madden, S; O'Halloran, B; Okumura, K; Oliver, S; Page, M; Panuzzo, P; Papageorgiou, A; Parkin, T; Perez-Fournon, I; Pohlen, M; Rangwala, N; Roussel, H; Rykala, A; Sacchi, N; Sauvage, M; Schulz, B; Schirm, M; Smith, M W L; Spinoglio, L; Stevens, J; Symeonidis, M; Vaccari, M; Vigroux, L; Wilson, C; Wozniak, H; Wright, G; Zeilinger, W

    2010-01-01

    The Herschel Reference Survey is a guaranteed time Herschel key project and will be a benchmark study of dust in the nearby universe. The survey will complement a number of other Herschel key projects including large cosmological surveys that trace dust in the distant universe. We will use Herschel to produce images of a statistically-complete sample of 323 galaxies at 250, 350 and 500 micron. The sample is volume-limited, containing sources with distances between 15 and 25 Mpc and flux limits in the K-band to minimize the selection effects associated with dust and with young high-mass stars and to introduce a selection in stellar mass. The sample spans the whole range of morphological types (ellipticals to late-type spirals) and environments (from the field to the centre of the Virgo Cluster) and as such will be useful for other purposes than our own. We plan to use the survey to investigate (i) the dust content of galaxies as a function of Hubble type, stellar mass and environment, (ii) the connection betwe...

  20. Global Reference Tables Services Architecture

    Data.gov (United States)

    Social Security Administration — This database stores the reference and transactional data used to provide a data-driven service access method to certain Global Reference Table (GRT) service tables.

  1. Nano-Bio Quantum Technology for Device-Specific Materials

    Science.gov (United States)

    Choi, Sang H.

    2009-01-01

    The areas discussed are still under development: I. Nano structured materials for TE applications a) SiGe and Be.Te; b) Nano particles and nanoshells. II. Quantum technology for optical devices: a) Quantum apertures; b) Smart optical materials; c) Micro spectrometer. III. Bio-template oriented materials: a) Bionanobattery; b) Bio-fuel cells; c) Energetic materials.

  2. Life-Cycle Assessment of Pyrolysis Bio-Oil Production*

    Energy Technology Data Exchange (ETDEWEB)

    Steele, Philip; Puettmann, Maureen E.; Penmetsa, Venkata Kanthi; Cooper, Jerome E.

    2012-07-01

    As part ofthe Consortium for Research on Renewable Industrial Materials' Phase I life-cycle assessments ofbiofuels, lifecycle inventory burdens from the production of bio-oil were developed and compared with measures for residual fuel oil. Bio-oil feedstock was produced using whole southern pine (Pinus taeda) trees, chipped, and converted into bio-oil by fast pyrolysis. Input parameters and mass and energy balances were derived with Aspen. Mass and energy balances were input to SimaPro to determine the environmental performance of bio-oil compared with residual fuel oil as a heating fuel. Equivalent functional units of 1 MJ were used for demonstrating environmental preference in impact categories, such as fossil fuel use and global warming potential. Results showed near carbon neutrality of the bio-oil. Substituting bio-oil for residual fuel oil, based on the relative carbon emissions of the two fuels, estimated a reduction in CO2 emissions by 0.075 kg CO2 per MJ of fuel combustion or a 70 percent reduction in emission over residual fuel oil. The bio-oil production life-cycle stage consumed 92 percent of the total cradle-to-grave energy requirements, while feedstock collection, preparation, and transportation consumed 4 percent each. This model provides a framework to better understand the major factors affecting greenhouse gas emissions related to bio-oil production and conversion to boiler fuel during fast pyrolysis.

  3. E-BioFlow: Different perspectives on scientific workflows

    NARCIS (Netherlands)

    Wassink, I.; Rauwerda, H.; van der Vet, P.; Breit, T.; Nijholt, A.

    2008-01-01

    We introduce a new type of workflow design system called e-BioFlow and illustrate it by means of a simple sequence alignment workflow. E-BioFlow, intended to model advanced scientific workflows, enables the user to model a workflow from three different but strongly coupled perspectives: the control

  4. E-BioFlow: Different Perspectives on Scientific Workflows

    NARCIS (Netherlands)

    Wassink, I.; Rauwerda, H.; Vet, van der P.E.; Breit, T.; Nijholt, A.; Elloumi, M.; Küng, J.; Linial, M.; Murphy, R.F.; Schneider, K.; Toma, C.

    2008-01-01

    We introduce a new type of workflow design system called e-BioFlow and illustrate it by means of a simple sequence alignment workflow. E-BioFlow, intended to model advanced scientific workflows, enables the user to model a workflow from three different but strongly coupled perspectives: the control

  5. Weiterentwicklung der Nationalen Forschungsstrategie Bioökonomie 2030

    DEFF Research Database (Denmark)

    von Braun, Joachim; Lang, Christine; Kögel-Knabner, Ingrid

    Im Jahr 2017 endet die erste Phase der „Nationalen Forschungsstrategie Bioökonomie 2030“. Der Bio-ökonomierat begleitet die Weiterentwicklung des Forschungsprogramms aktiv. Viele richtige Weichenstellungen sind erfolgt, nun gilt es mit ungebrochenem Engagement und Zielbewusstsein die Forschung zu...

  6. BioRuby: Bioinformatics software for the Ruby programming language

    NARCIS (Netherlands)

    Goto, N.; Prins, J.C.P.; Nakao, M.; Bonnal, R.; Aerts, J.; Katayama, A.

    2010-01-01

    The BioRuby software toolkit contains a comprehensive set of free development tools and libraries for bioinformatics and molecular biology, written in the Ruby programming language. BioRuby has components for sequence analysis, pathway analysis, protein modelling and phylogenetic analysis; it suppor

  7. BioRuby : bioinformatics software for the Ruby programming language

    NARCIS (Netherlands)

    Goto, Naohisa; Prins, Pjotr; Nakao, Mitsuteru; Bonnal, Raoul; Aerts, Jan; Katayama, Toshiaki

    2010-01-01

    The BioRuby software toolkit contains a comprehensive set of free development tools and libraries for bioinformatics and molecular biology, written in the Ruby programming language. BioRuby has components for sequence analysis, pathway analysis, protein modelling and phylogenetic analysis; it suppor

  8. Laser Induced Millimeter Wave Fluorescence From Bio-Materials

    Science.gov (United States)

    2008-10-01

    have on identifying and developing effective sensor countermeasures against bio-warfare agent threats - in particular an effective bio-threat early ...IR Intensityf’fewmal IR htensjty 850 900 950 1000 1050 Vibrational Frequency (cm1) (a) (LAMP Transition Probability IR hta -i3tyMa;urral IR

  9. Public Perception of Bio fuels; Percepcion Publica de los Biocombustibles

    Energy Technology Data Exchange (ETDEWEB)

    Oltra, C.; Priolo, V.

    2011-11-10

    The deployment of bio fuels has generated a significant controversy in the energy, agricultural and environmental fields. Governments and promoters around the world have advocated for developing bio fuels based on their potential contribution to emissions reduction and energy security. But opposition to bio fuels has growth in the last years. Environmental NGO's and other stake holders have called for a review of the environmental and social sustainability of energy crops. This controversy has characterized the public debate around bio fuels. In this context, and given the need to improve public involvement in energy technologies, this article reports an investigation of Spanish citizens' perceptions about bio fuels. The study investigated the perceptions of informed citizens and the reasoning basis underlying beliefs and attitudes. The study finds an initial positive association of bio fuels to a clean and natural fuel that is mitigated by participants' concerns on the practical usage of bio fuels and the social and environmental impacts. Study participants' reactions show the need to differentiate among the diverse groups of publics holding differing views and a different reaction to information on the benefits and costs of bio fuels. (Author) 9 refs.

  10. Hydraulic Systems with Tap Water versus Bio-oils

    DEFF Research Database (Denmark)

    Conrad, Finn

    1997-01-01

    Deals with the advantages of using pure tap water hydraulics versus bio-oils for suiteable applications. Focus is in particular on food processing industry.......Deals with the advantages of using pure tap water hydraulics versus bio-oils for suiteable applications. Focus is in particular on food processing industry....

  11. IA of bio-economic projects in Region Zealand, Denmark

    DEFF Research Database (Denmark)

    Lybæk, Rikke; Kjær, Tyge; Palsberg, Aske

    Creating new pathways for sustainable ready-to-implement bio-economic projects within Region Zealand, Denmark, based on available biomass resources and existing and proven technology concepts.......Creating new pathways for sustainable ready-to-implement bio-economic projects within Region Zealand, Denmark, based on available biomass resources and existing and proven technology concepts....

  12. Bio fuels price; El precio de los biocombustibles

    Energy Technology Data Exchange (ETDEWEB)

    Rotman, D.

    2008-07-01

    he process of producing ethanol from corn is very expensive. The best bio-fuel is very far from the service stations and the farmers show difficulties to change his work methods. Really have we a suitable technology to produce bio-fuels?.

  13. Bio-composites from mycelium reinforced agricultural substrates

    Science.gov (United States)

    There is a need for biodegradable alternatives to the inert plastics and expanded foams currently used in in manufacturing processes and device components. The material focused on in this report is a bio-composite patented by Ecovative Design, LLC. The bio-composite utilizes the fungus mycelium to i...

  14. Bio-TDS: bioscience query tool discovery system.

    Science.gov (United States)

    Gnimpieba, Etienne Z; VanDiermen, Menno S; Gustafson, Shayla M; Conn, Bill; Lushbough, Carol M

    2017-01-04

    Bioinformatics and computational biology play a critical role in bioscience and biomedical research. As researchers design their experimental projects, one major challenge is to find the most relevant bioinformatics toolkits that will lead to new knowledge discovery from their data. The Bio-TDS (Bioscience Query Tool Discovery Systems, http://biotds.org/) has been developed to assist researchers in retrieving the most applicable analytic tools by allowing them to formulate their questions as free text. The Bio-TDS is a flexible retrieval system that affords users from multiple bioscience domains (e.g. genomic, proteomic, bio-imaging) the ability to query over 12 000 analytic tool descriptions integrated from well-established, community repositories. One of the primary components of the Bio-TDS is the ontology and natural language processing workflow for annotation, curation, query processing, and evaluation. The Bio-TDS's scientific impact was evaluated using sample questions posed by researchers retrieved from Biostars, a site focusing on BIOLOGICAL DATA ANALYSIS: The Bio-TDS was compared to five similar bioscience analytic tool retrieval systems with the Bio-TDS outperforming the others in terms of relevance and completeness. The Bio-TDS offers researchers the capacity to associate their bioscience question with the most relevant computational toolsets required for the data analysis in their knowledge discovery process.

  15. Fundamentals of Managing Reference Collections

    Science.gov (United States)

    Singer, Carol A.

    2012-01-01

    Whether a library's reference collection is large or small, it needs constant attention. Singer's book offers information and insight on best practices for reference collection management, no matter the size, and shows why managing without a plan is a recipe for clutter and confusion. In this very practical guide, reference librarians will learn:…

  16. Quercetin as natural stabilizing agent for bio-polymer

    Science.gov (United States)

    Morici, Elisabetta; Arrigo, Rossella; Dintcheva, Nadka Tzankova

    2014-05-01

    The introduction of antioxidants in polymers is the main way to prevent or delay the degradation process. In particular natural antioxidants receive attention in the food industry also because of their presumed safety. In this work bio-polymers, i.e. a commercial starch-based polymer (Mater-Bi®) and a bio-polyester (PLA), and a bio-polyether (PEO) were additivated with quercetin, a natural flavonoid antioxidants, in order to formulate bio-based films for ecosustainable packaging and outdoor applications. The photo-oxidation behavior of unstabilized and quercetin stabilized films was analyzed and compared with the behavior of films additivated with a commercial synthetic light stabilizer. The quercetin is able to slow down the photo-degradation rate of all bio-polymeric films investigated in similar way to the synthetic stabilizer.

  17. Quercetin as natural stabilizing agent for bio-polymer

    Energy Technology Data Exchange (ETDEWEB)

    Morici, Elisabetta [Dipartimento di Ingegneria Chimica, Gestionale, Informatica, Meccanica, Università di Palermo, 90128 Palermo (Italy); Arrigo, Rossella; Dintcheva, Nadka Tzankova [Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, 90128 Palermo (Italy)

    2014-05-15

    The introduction of antioxidants in polymers is the main way to prevent or delay the degradation process. In particular natural antioxidants receive attention in the food industry also because of their presumed safety. In this work bio-polymers, i.e. a commercial starch-based polymer (Mater-Bi®) and a bio-polyester (PLA), and a bio-polyether (PEO) were additivated with quercetin, a natural flavonoid antioxidants, in order to formulate bio-based films for ecosustainable packaging and outdoor applications. The photo-oxidation behavior of unstabilized and quercetin stabilized films was analyzed and compared with the behavior of films additivated with a commercial synthetic light stabilizer. The quercetin is able to slow down the photo-degradation rate of all bio-polymeric films investigated in similar way to the synthetic stabilizer.

  18. Bio-based chemicals - green, but also sustainable?

    DEFF Research Database (Denmark)

    Ögmundarson, Ólafur; Herrgard, Markus; Förster, Jochen;

    For almost two decades, the chemical industry has put great effort into developing bio-chemicals,among others to fight global warming caused by greenhouse gas emissions, one of the biggest threats that are faced by our society today. To facilitate a growing and versatile bio-based chemical...... production, the US Department of Energy proposed in 2004 a list of 12 building block chemicals which can either be converged through biological or chemical conversions. Moving toward more bio-based chemicals, the chemical industry does not only claim to reduce climate change impacts, but also...... that they are increasing overall sustainability in chemical production. Whether such claims are justifiable is unclear. When sustainability of bio-based polymer production is assessed, various environmental trade-offs occur that need to be considered. It is not enough to claim that a bio-chemical is sustainable...

  19. Protein bio-corona: critical issue in immune nanotoxicology.

    Science.gov (United States)

    Neagu, Monica; Piperigkou, Zoi; Karamanou, Konstantina; Engin, Ayse Basak; Docea, Anca Oana; Constantin, Carolina; Negrei, Carolina; Nikitovic, Dragana; Tsatsakis, Aristidis

    2017-03-01

    With the expansion of the nanomedicine field, the knowledge focusing on the behavior of nanoparticles in the biological milieu has rapidly escalated. Upon introduction to a complex biological system, nanomaterials dynamically interact with all the encountered biomolecules and form the protein "bio-corona." The decoration with these surface biomolecules endows nanoparticles with new properties. The present review will address updates of the protein bio-corona characteristics as influenced by nanoparticle's physicochemical properties and by the particularities of the encountered biological milieu. Undeniably, bio-corona generation influences the efficacy of the nanodrug and guides the actions of innate and adaptive immunity. Exploiting the dynamic process of protein bio-corona development in combination with the new engineered horizons of drugs linked to nanoparticles could lead to innovative functional nanotherapies. Therefore, bio-medical nanotechnologies should focus on the interactions of nanoparticles with the immune system for both safety and efficacy reasons.

  20. Field-effect-based multifunctional hybrid sensor module for the determination of both (bio-)chemical and physical parameters

    Science.gov (United States)

    Schoening, Michael J.; Poghossian, Arshak; Schultze, J. Walter; Lueth, Hans

    2002-02-01

    Sensor systems for multi-parameter detection in fluidics usually combine different sensors, which are designed to detect either a physical or (bio-)chemical parameter. Therefore, such systems include a more complicated fabrication technology and measuring set-up. In this work, an ISFET (ion-sensitive field-effect transistor), which is well known as a (bio-)chemical sensor, is utilized as transducer for the detection of both (bio-)chemical and physical parameters. A multifunctional hybrid module for the determination of two (bio-)chemical parameters (pH, penicillin concentration) and three physical parameters (temperature, flow velocity and flow direction) using only two sensor structures, an ion generator and a reference electrode, is realized and its performance has been investigated. Here, a multifunctionality of the sensor system is achieved by means of different sensor arrangements and/or different operation modes. A Ta2O5-gate ISFET was used as transducer for all sensors. A novel time-of-flight type ISFET-based flow-velocity (flow rate) and flow-direction sensor using in-situ electrochemical generation of chemical tracers is presented. Due to the fast response of the ISFET (usually in the millisecond range), an ISFET-based flow sensor is suitable for the measurement of the flow velocity in a wide range. With regard to practical applications, pH measurements with this ISFET were performed in rain droplets.

  1. M-DNA/Transition Metal Dichalcogenide Hybrid Structure-based Bio-FET sensor with Ultra-high Sensitivity

    Science.gov (United States)

    Park, Hyung-Youl; Dugasani, Sreekantha Reddy; Kang, Dong-Ho; Yoo, Gwangwe; Kim, Jinok; Gnapareddy, Bramaramba; Jeon, Jaeho; Kim, Minwoo; Song, Young Jae; Lee, Sungjoo; Heo, Jonggon; Jeon, Young Jin; Park, Sung Ha; Park, Jin-Hong

    2016-01-01

    Here, we report a high performance biosensor based on (i) a Cu2+-DNA/MoS2 hybrid structure and (ii) a field effect transistor, which we refer to as a bio-FET, presenting a high sensitivity of 1.7 × 103 A/A. This high sensitivity was achieved by using a DNA nanostructure with copper ions (Cu2+) that induced a positive polarity in the DNA (receptor). This strategy improved the detecting ability for doxorubicin-like molecules (target) that have a negative polarity. Very short distance between the biomolecules and the sensor surface was obtained without using a dielectric layer, contributing to the high sensitivity. We first investigated the effect of doxorubicin on DNA/MoS2 and Cu2+-DNA/MoS2 nanostructures using Raman spectroscopy and Kelvin force probe microscopy. Then, we analyzed the sensing mechanism and performance in DNA/MoS2- and Cu2+-DNA/MoS2-based bio-FETs by electrical measurements (ID-VG at various VD) for various concentrations of doxorubicin. Finally, successful operation of the Cu2+-DNA/MoS2 bio-FET was demonstrated for six cycles (each cycle consisted of four steps: 2 preparation steps, a sensing step, and an erasing step) with different doxorubicin concentrations. The bio-FET showed excellent reusability, which has not been achieved previously in 2D biosensors. PMID:27775004

  2. Waste materials derived bio-effectors used as growth promoters for strawberry plants. An agronomic and metabolomic study

    Science.gov (United States)

    Vasileva, Brankica; Chami, Ziad Al; De Pascali, Sandra; Cavoski, Ivana; Fanizzi, Francesco Paolo

    2015-04-01

    Recently, a novel concept of bio-effectors has emerged to describe a group of products that are able to improve plant performance more than fertilizers. In this study, three different agro-industrial residues, i.e. brewers' spent grain (BSG), fennel processing residues (FPR) and lemon processing residues (LPR) were chosen as potential bio-effectors. A greenhouse soilless pot experiment was conducted on strawberry plants (Fragaria x ananassa var. Festival) in order to study the effect of BSG, FPR and LPR water extracts, at different concentrations, on plant growth and fruit quality. Their effect was compared with humic-like substances as a positive/reference control (Ctrl+) and with Hoagland solution as a negative control (Ctrl-). Agronomic parameters and the nutrient uptake were measured on shoots, roots and fruits. Metabolomic profiling tests were carried out on leaves, roots and fruit juices through the NMR technique. Plants treated with the FPR extract showed better vegetative growth, while plants treated with the BSG extract gave higher yield and better fruit size. Metabolomic profiling showed that fruits and roots of plants treated with FPR and LPR extracts had higher concentrations of sucrose, malate and acetate, while BSG treated plants had higher concentrations of citrate and β-glucose. In conclusion, according to the results achieved, the bio-effectors used in this study promote plant growth and fruit quality regardless of their nutritional content. Keywords: bio-effectors, agro-industrial waste, nuclear magnetic resonance (NMR), strawberry, growth promotion, fruit quality.

  3. Green bio-oil extraction for oil crops

    Science.gov (United States)

    Zainab, H.; Nurfatirah, N.; Norfaezah, A.; Othman, H.

    2016-06-01

    The move towards a green bio-oil extraction technique is highlighted in this paper. The commonly practised organic solvent oil extraction technique could be replaced with a modified microwave extraction. Jatropha seeds (Jatropha curcas) were used to extract bio-oil. Clean samples were heated in an oven at 110 ° C for 24 hours to remove moisture content and ground to obtain particle size smaller than 500μm. Extraction was carried out at different extraction times 15 min, 30 min, 45 min, 60 min and 120 min to determine oil yield. The biooil yield obtained from microwave assisted extraction system at 90 minutes was 36% while that from soxhlet extraction for 6 hours was 42%. Bio-oil extracted using the microwave assisted extraction (MAE) system could enhance yield of bio-oil compared to soxhlet extraction. The MAE extraction system is rapid using only water as solvent which is a nonhazardous, environment-friendly technique compared to soxhlet extraction (SE) method using hexane as solvent. Thus, this is a green technique of bio-oil extraction using only water as extractant. Bio-oil extraction from the pyrolysis of empty fruit bunch (EFB), a biomass waste from oil palm crop, was enhanced using a biocatalyst derived from seashell waste. Oil yield for non-catalytic extraction was 43.8% while addition of seashell based biocatalyst was 44.6%. Oil yield for non-catalytic extraction was 43.8% while with addition of seashell-based biocatalyst was 44.6%. The pH of bio-oil increased from 3.5 to 4.3. The viscosity of bio-oil obtained by catalytic means increased from 20.5 to 37.8 cP. A rapid and environment friendly extraction technique is preferable to enhance bio-oil yield. The microwave assisted approach is a green, rapid and environmental friendly extraction technique for the production of bio-oil bearing crops.

  4. A Survey of Business Trends at BioOne Publishing Partners and its Implications for BioOne

    Science.gov (United States)

    Carpenter, Todd A.; Joseph, Heather; Waltham, Mary

    2004-01-01

    This paper describes a survey of BioOne participating publishers that was conducted during the fall of 2003. In that survey, BioOne collected data from 18 not-for-profit publishers on circulation levels, scholarly output in terms of pages and articles produced, revenues, and expenditures. From eight of the publishers, complete profit, loss, and…

  5. Co-reference and reasoning.

    Science.gov (United States)

    Walsh, Clare R; Johnson-Laird, P N

    2004-01-01

    Co-reference occurs when two or more noun phrases refer to the same individual, as in the following inferential problem: Mark is kneeling by the fire or he is looking at the TV but not both. / Mark is kneeling by the fire. / Is he looking at the TV? In three experiments, we compared co-referential reasoning problems with problems referring to different individuals. Experiment 1 showed that co-reference improves accuracy. In Experiment 2, we replicated that finding and showed that co-reference speeds up both reading and inference. Experiment 3 showed that the effects of co-reference are greatest when the premises and the conclusion share co-referents. These effects led the participants to make illusory inferences--that is, to draw systematically invalid conclusions. The results are discussed in terms of the mental model theory of reasoning.

  6. The bio-gripper: a fluid-driven micro-manipulator of living tissue constructs for additive bio-manufacturing.

    Science.gov (United States)

    Ip, Blanche C; Cui, Francis; Tripathi, Anubhav; Morgan, Jeffrey R

    2016-05-25

    We previously developed the Bio-Pick, Place, and Perfuse (Bio-P3) instrument to fabricate large perfusable tissue constructs by stacking and aligning scaffold-free living microtissues with integrated lumens. The Bio-P3 required an actuating mechanism to manipulate living microtissues of various sizes and shapes that are fragile, and must remain in an aqueous environment. The optical transparency of the Bio-P3 gripping device was essential to provide unobstructed visuals for accurate alignment of microtissues. We previously engineered a pilot fluid force-driven bio-gripper that can pick-and-place microtissue in planar position without causing cellular damage by pulling culture medium through track-etched membrane-integrated cell culture inserts. In this study, we invented a new flexible bio-gripper design that maximized the bio-gripper utilities. We utilized experimental approaches, multivariate analyzes, and theoretical modeling to elucidate how membrane characteristics (pore size, pore density, membrane thickness, membrane area, and surface chemistry) altered bio-gripper robustness and the flow rate (Q(c)) required for successful gripping. We devised two standardized tests and synthetic parts that mimicked microtissues, to systematically quantify bio-gripper performance. All thirteen syringe pump-driven bio-grippers except one successfully gripped and released synthetic parts with values of Q(c) that coincided with our mathematical simulation of the fluid mechanics of gripping. The bio-gripper could grip synthetic parts of various sizes, shapes and masses, demonstrating the robustness of the actuating mechanism. Multivariate analysis of experimental data indicated that both membrane porosity and thickness modulated Q(c), and in addition, revealed that membrane pore density determined membrane optical transparency. Fabricating large tissue constructs requires repeated stacking of microtissues. We showed that one bio-gripper could pick-and-place living microtissues

  7. The role of cystovaginoscopy and hygienic advice in girls referred for symptoms of vulvovaginitis.

    Science.gov (United States)

    Ram, Ashok Daya; Hurst, Katherine Victoria; Steinbrecher, Henrik

    2012-05-01

    Vulvovaginitis is a common presenting symptom referred to a paediatric urology clinic. Some of these patients undergo diagnostic cystovaginoscopy to determine whether there is any underlying anatomical cause for the persistent infection. However, in the majority of the patients, no underlying abnormality is found and they are given hygienic advice and prescribed bio yoghurt postoperatively. This study examines the outcome in these patients after hygienic advice is given: determining whether cystovaginoscopy was really necessary and whether it changed the management of vulvovaginitis.

  8. Civic education and political participation among youth at Universidad del Bio- Bio, Chile

    Directory of Open Access Journals (Sweden)

    Cristian Orellana Fonseca

    2015-06-01

    Full Text Available The results of this paper are the product of a broader research on political participation. The expressions of young university students are there analyzed about civic education received at school related to political participation. Three focus groups were held with freshmen at Universidad del Bio-Bio, Chile. The results show that the vision of young people about the formation received is rather critical. On the one hand, the need for civic education is identified as that which allows to address the complexity of political activity. Secondly, it is found that school education does not respond to this need, since it is qualified as poor and biased. For students, education must play a politicizing role, providing inputs to influence social change.

  9. Aurelia aurita bio-inspired tilt sensor

    Science.gov (United States)

    Smith, Colin; Villanueva, Alex; Priya, Shashank

    2012-10-01

    The quickly expanding field of mobile robots, unmanned underwater vehicles, and micro-air vehicles urgently needs a cheap and effective means for measuring vehicle inclination. Commonly, tilt or inclination has been mathematically derived from accelerometers; however, there is inherent error in any indirect measurement. This paper reports a bio-inspired tilt sensor that mimics the natural balance organ of jellyfish, called the ‘statocyst’. Biological statocysts from the species Aurelia aurita were characterized by scanning electron microscopy to investigate the morphology and size of the natural sensor. An artificial tilt sensor was then developed by using printed electronics that incorporates a novel voltage divider concept in conjunction with small surface mount devices. This sensor was found to have minimum sensitivity of 4.21° with a standard deviation of 1.77°. These results open the possibility of developing elegant tilt sensor architecture for both air and water based platforms.

  10. Tough, bio-inspired hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Munch, Etienne; Launey, Maximimilan E.; Alsem, Daan H.; Saiz, Eduardo; Tomsia, Antoni P.; Ritchie, Robert O.

    2008-10-06

    The notion of mimicking natural structures in the synthesis of new structural materials has generated enormous interest but has yielded few practical advances. Natural composites achieve strength and toughness through complex hierarchical designs extremely difficult to replicate synthetically. Here we emulate Nature's toughening mechanisms through the combination of two ordinary compounds, aluminum oxide and polymethylmethacrylate, into ice-templated structures whose toughness can be over 300 times (in energy terms) that of their constituents. The final product is a bulk hybrid ceramic material whose high yield strength and fracture toughness ({approx}200 MPa and {approx}30 MPa{radical}m) provide specific properties comparable to aluminum alloys. These model materials can be used to identify the key microstructural features that should guide the synthesis of bio-inspired ceramic-based composites with unique strength and toughness.

  11. Review of Bio-EMC Studies

    Science.gov (United States)

    Watanabe, Soichi; Wake, Kanako; Fukunaga, Kaori; Yamanaka, Yukio

    2001-12-01

    Biological aspects of electromagnetic compatibility (Bio-EMC) have been studied by EMC Research Group of CRL. There are two main subjects in the field. One is related to rules and regulations of electromagnetic-wave hazards, especially development of standard estimation methods of electromagnetic power deposited in human bodies exposed to microwaves from cellular telephones or VHF-band radio waves. Another is development of exposure setups for laboratory animals used in biological studies on health effects of electromagnetic waves and their dosimetry. Novel phantoms are also being developed in order to perform highly accurate dosimetry in above studies. It is expected that these studies contribute development of compliance tests for radiofrequency protection guidelines and improvement of rationale of those guidelines, which consequently provides safety environment including appropriate radio wave applications.

  12. Bio-based polycarbonate as synthetic toolbox

    Science.gov (United States)

    Hauenstein, O.; Agarwal, S.; Greiner, A.

    2016-06-01

    Completely bio-based poly(limonene carbonate) is a thermoplastic polymer, which can be synthesized by copolymerization of limonene oxide (derived from limonene, which is found in orange peel) and CO2. Poly(limonene carbonate) has one double bond per repeating unit that can be exploited for further chemical modifications. These chemical modifications allow the tuning of the properties of the aliphatic polycarbonate in nearly any direction. Here we show synthetic routes to demonstrate that poly(limonene carbonate) is the perfect green platform polymer, from which many functional materials can be derived. The relevant examples presented in this study are the transformation from an engineering thermoplastic into a rubber, addition of permanent antibacterial activity, hydrophilization and even pH-dependent water solubility of the polycarbonate. Finally, we show a synthetic route to yield the completely saturated counterpart that exhibits improved heat processability due to lower reactivity.

  13. Bio-based polycarbonate as synthetic toolbox

    Science.gov (United States)

    Hauenstein, O.; Agarwal, S.; Greiner, A.

    2016-01-01

    Completely bio-based poly(limonene carbonate) is a thermoplastic polymer, which can be synthesized by copolymerization of limonene oxide (derived from limonene, which is found in orange peel) and CO2. Poly(limonene carbonate) has one double bond per repeating unit that can be exploited for further chemical modifications. These chemical modifications allow the tuning of the properties of the aliphatic polycarbonate in nearly any direction. Here we show synthetic routes to demonstrate that poly(limonene carbonate) is the perfect green platform polymer, from which many functional materials can be derived. The relevant examples presented in this study are the transformation from an engineering thermoplastic into a rubber, addition of permanent antibacterial activity, hydrophilization and even pH-dependent water solubility of the polycarbonate. Finally, we show a synthetic route to yield the completely saturated counterpart that exhibits improved heat processability due to lower reactivity. PMID:27302694

  14. HSP as bio dosemeters; HSP como biodosimetros

    Energy Technology Data Exchange (ETDEWEB)

    Manzanares A, E.; Vega C, H.R. [Grupo Academico de Radiobiologia, UAZ, A.P. 336, 98000 Zacatecas (Mexico)

    2005-07-01

    A review of the more important passages for the field of the radiological protection, from the discovery, beginnings of the utilization of the radiations emitting, passing to the legislation proposals and the transformations that had been suffer to establish the international standards of radiological protection. The paradigms on the effects and chronologically the emanated discoveries of the cellular research and the measurement of cellular products in the species and the diverse alive beings making emphasis in evaluating the expression of the heat-shock proteins caused by low doses of gamma radiation, these are used as radiation bio monitors and of other agents that cause cellular stress and lastly a prospective of the future of the radiobiology. (Author)

  15. Springer handbook of bio-/neuroinformatics

    CERN Document Server

    2014-01-01

    The Springer Handbook of Bio-/Neuro-Informatics is the first published book in one volume that explains together the basics and the state-of-the-art of two major science disciplines in their interaction and mutual relationship, namely: information sciences, bioinformatics and neuroinformatics. Bioinformatics is the area of science which is concerned with the information processes in biology and the development and applications of methods, tools and systems for storing and processing of biological information thus facilitating new knowledge discovery. Neuroinformatics is the area of science which is concerned with the information processes in biology and the development and applications of methods, tools and systems for storing and processing of biological information thus facilitating new knowledge discovery. The text contains 62 chapters organized in 12 parts, 6 of them covering topics from information science and bioinformatics, and 6 cover topics from information science and neuroinformatics. Each chapter ...

  16. DCE Bio Detection System Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lind, Michael A.; Batishko, Charles R.; Morgen, Gerald P.; Owsley, Stanley L.; Dunham, Glen C.; Warner, Marvin G.; Willett, Jesse A.

    2007-12-01

    The DCE (DNA Capture Element) Bio-Detection System (Biohound) was conceived, designed, built and tested by PNNL under a MIPR for the US Air Force under the technical direction of Dr. Johnathan Kiel and his team at Brooks City Base in San Antonio Texas. The project was directed toward building a measurement device to take advantage of a unique aptamer based assay developed by the Air Force for detecting biological agents. The assay uses narrow band quantum dots fluorophores, high efficiency fluorescence quenchers, magnetic micro-beads beads and selected aptamers to perform high specificity, high sensitivity detection of targeted biological materials in minutes. This final report summarizes and documents the final configuration of the system delivered to the Air Force in December 2008

  17. Radiation application for upgrading of bio resources

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Keun; Lee, Young Il; Kim, Jae Sung; Kim, Jin Kyu; Chun, Ki Jung; Lee, Sang Jae; Kim, Yeon Ku; Chang, Hwa Hyoung; Song, In Geun; Lee, Ki Sung; Ko, Dong Kyu; Lee, Sung Ho; Han, Gab Jin

    2000-04-01

    To degrade lignin which is the most difficult fraction to be degraded in cellulosic bio resources and reuse as valuable formats, the improved strains of edible mushroom with more highly ligno cellulolytic activity were induced by {gamma}-ray radiation and analysed their physiological and genetical characteristics. Mnp, Lac gene related to be the above were cloned. From the base sequence analysis, it seemed that there could be specific radiation-sensitive spots on the gene of mutants. anti mutagenicity, glyceollin elicitation activity and synergistic effects with indole acetic acid were found promisingly from the extracts of their cultural byproducts. And also were the byproducts expected to be useful for the candidate of subsidiary animal feed. By the radiation mutation, it seemed to be possible to induce the improved strains of antifungal activity, too. (author)

  18. Bio-inspired odor-based navigation

    Science.gov (United States)

    Porter, Maynard J., III; Vasquez, Juan R.

    2006-05-01

    The ability of many insects, especially moths, to locate either food or a member of the opposite sex is an amazing achievement. There are numerous scenarios where having this ability embedded into ground-based or aerial vehicles would be invaluable. This paper presents results from a 3-D computer simulation of an Unmanned Aerial Vehicle (UAV) autonomously tracking a chemical plume to its source. The simulation study includes a simulated dynamic chemical plume, 6-degree of freedom, nonlinear aircraft model, and a bio-inspired navigation algorithm. The emphasis of this paper is the development and analysis of the navigation algorithm. The foundation of this algorithm is a fuzzy controller designed to categorize where in the plume the aircraft is located: coming into the plume, in the plume, exiting the plume, or out of the plume.

  19. Bio and health informatics meets cloud : BioVLab as an example.

    Science.gov (United States)

    Chae, Heejoon; Jung, Inuk; Lee, Hyungro; Marru, Suresh; Lee, Seong-Whan; Kim, Sun

    2013-01-01

    The exponential increase of genomic data brought by the advent of the next or the third generation sequencing (NGS) technologies and the dramatic drop in sequencing cost have driven biological and medical sciences to data-driven sciences. This revolutionary paradigm shift comes with challenges in terms of data transfer, storage, computation, and analysis of big bio/medical data. Cloud computing is a service model sharing a pool of configurable resources, which is a suitable workbench to address these challenges. From the medical or biological perspective, providing computing power and storage is the most attractive feature of cloud computing in handling the ever increasing biological data. As data increases in size, many research organizations start to experience the lack of computing power, which becomes a major hurdle in achieving research goals. In this paper, we review the features of publically available bio and health cloud systems in terms of graphical user interface, external data integration, security and extensibility of features. We then discuss about issues and limitations of current cloud systems and conclude with suggestion of a biological cloud environment concept, which can be defined as a total workbench environment assembling computational tools and databases for analyzing bio/medical big data in particular application domains.

  20. Process attributes in bio-ontologies

    Directory of Open Access Journals (Sweden)

    Andrade André Q

    2012-08-01

    Full Text Available Abstract Background Biomedical processes can provide essential information about the (mal- functioning of an organism and are thus frequently represented in biomedical terminologies and ontologies, including the GO Biological Process branch. These processes often need to be described and categorised in terms of their attributes, such as rates or regularities. The adequate representation of such process attributes has been a contentious issue in bio-ontologies recently; and domain ontologies have correspondingly developed ad hoc workarounds that compromise interoperability and logical consistency. Results We present a design pattern for the representation of process attributes that is compatible with upper ontology frameworks such as BFO and BioTop. Our solution rests on two key tenets: firstly, that many of the sorts of process attributes which are biomedically interesting can be characterised by the ways that repeated parts of such processes constitute, in combination, an overall process; secondly, that entities for which a full logical definition can be assigned do not need to be treated as primitive within a formal ontology framework. We apply this approach to the challenge of modelling and automatically classifying examples of normal and abnormal rates and patterns of heart beating processes, and discuss the expressivity required in the underlying ontology representation language. We provide full definitions for process attributes at increasing levels of domain complexity. Conclusions We show that a logical definition of process attributes is feasible, though limited by the expressivity of DL languages so that the creation of primitives is still necessary. This finding may endorse current formal upper-ontology frameworks as a way of ensuring consistency, interoperability and clarity.

  1. Virtual Reference Interferometry: Theory & Experiment

    Science.gov (United States)

    Galle, Michael Anthony

    This thesis introduces the idea that a simulated interferogram can be used as a reference for an interferometer. This new concept represents a paradigm shift from the conventional thinking, where a reference is the phase of a wavefront that traverses a known path. The simulated interferogram used as a reference is called a virtual reference. This thesis develops the theory of virtual reference interferometry and uses it for the characterization of chromatic dispersion in short length (virtual reference combines the advantages of these techniques so that it is both accurate and easy to operate. Chromatic dispersion measurements based on virtual reference interferometry have similar accuracy as the best conventional measurement techniques due to the ability to measure first and second order dispersion directly from the interference pattern. Unique capabilities of virtual reference interferometry are demonstrated, followed by a derivation of the operational constraints and system parameters. The technique is also applied to the characterization of few-mode fibers, a hot topic in telecommunications research where mode division multiplexing promises to expand network bandwidth. Also introduced is the theory of dispersive virtual reference interferometry, which can be used to overcome the bandwidth limitations associated with the measurement of near-zero dispersion-length optical components via compression of the interference pattern. Additionally, a method for utilizing the virtual reference interferometer in a low-coherence setup is introduced, enabling characterization in new wavelength ranges and further reducing the cost of characterization.

  2. Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char

    Energy Technology Data Exchange (ETDEWEB)

    Ben Hassen-Trabelsi, A., E-mail: aidabenhassen@yahoo.fr [Centre de Recherche et de Technologies de l’Energie (CRTEn), Technopôle Borj-Cédria, B.P 95, 2050, Hammam Lif (Tunisia); Kraiem, T. [Centre de Recherche et de Technologies de l’Energie (CRTEn), Technopôle Borj-Cédria, B.P 95, 2050, Hammam Lif (Tunisia); Département de Géologie, Université de Tunis, 2092, Tunis (Tunisia); Naoui, S. [Centre de Recherche et de Technologies de l’Energie (CRTEn), Technopôle Borj-Cédria, B.P 95, 2050, Hammam Lif (Tunisia); Belayouni, H. [Département de Géologie, Université de Tunis, 2092, Tunis (Tunisia)

    2014-01-15

    Highlights: • Produced bio-fuels (bio-oil and bio-char) from some animal fatty wastes. • Investigated the effects of main parameters on pyrolysis products distribution. • Determined the suitable conditions for the production of the maximum of bio-oil. • Characterized bio-oils and bio-chars obtained from several animal fatty wastes. - Abstract: Several animal (lamb, poultry and swine) fatty wastes were pyrolyzed under nitrogen, in a laboratory scale fixed-bed reactor and the main products (liquid bio-oil, solid bio-char and syngas) were obtained. The purpose of this study is to produce and characterize bio-oil and bio-char obtained from pyrolysis of animal fatty wastes. The maximum production of bio-oil was achieved at a pyrolysis temperature of 500 °C and a heating rate of 5 °C/min. The chemical (GC–MS analyses) and spectroscopic analyses (FTIR analyses) of bio-oil showed that it is a complex mixture consisting of different classes of organic compounds, i.e., hydrocarbons (alkanes, alkenes, cyclic compounds…etc.), carboxylic acids, aldehydes, ketones, esters,…etc. According to fuel properties, produced bio-oils showed good properties, suitable for its use as an engine fuel or as a potential source for synthetic fuels and chemical feedstock. Obtained bio-chars had low carbon content and high ash content which make them unattractive for as renewable source energy.

  3. CO{sub 2} reduction cost for bio-diesel, Danish produced bio-diesel based on rape seed; CO{sub 2} reduktionsomkostninger ved biodiesel. Dansk produceret biodiesel pae raps

    Energy Technology Data Exchange (ETDEWEB)

    Carlsen, Kirsten; Kjellingbro, M.; Mogensen, Martin Frank; Kohl, M.

    2006-12-15

    Bio-diesel based on rape seed (RME, Rape Methyl Esther), often referred to as first generation bio-diesel, is a renewable fuel with CO{sub 2} reduction potential. Mixed with conventional diesel it can be used directly in existing diesel engines. The EU target for the use of bio-fuels in the transport sector was 2 % by 2005 and is 5.75 % by 2010. In Denmark, the use of bio-fuels in the transport sector is not viewed as a cost-effective CO{sub 2} reduction measure. This conclusion concerning the cost-effectiveness of bio-fuels was partly based on calculations of the CO2 reduction cost for Danish-produced RME made by the Danish Energy Authority in 2003. At that time the cost was estimated at 360 DKK/tonne CO{sub 2}. Since then some of the assumptions behind the calculations have changed. The overall objective of this report is to update the Danish Energy Authority's study from 2003, taking into account revised assumptions. The report also attempts to examine the uncertainties associated with the calculations by including extended sensitivity analyses. The report draws the following conclusions: 1) The CO{sub 2} reduction cost for Danish produced RME is estimated at 860 DKK/tonne CO{sub 2}, which is significantly higher than the result obtained by the Danish Energy Authority in 2003. 2) The difference from the Danish Energy Authority's original calculations is principally due to a higher rape seed price based on the market price on rape seed. 3) The uncertainty in both estimates is substantial, and there is about 15 % probability of the reduction costs being lower than the target of 180 DKK/tonne CO2 set by the government. (au)

  4. Bio-oils and other bio fuels used in heat- and power generation; Flytande biobraenslen foer el- och vaermeproduktion

    Energy Technology Data Exchange (ETDEWEB)

    Sandgren, Annamaria; Ekdahl, Emma; Sernhed, Kerstin; Lindstroem, Erica

    2010-05-15

    The purpose of this study was to assemble and disseminate knowledge about bio-oils and other bio fuels which are used for heat- and power generation or liquid bio fuels/oils that may become interesting in the future. One aim of this study was to give an updated picture of the Swedish market for bio-oils and to provide an overview of practical experience on the usage of bio-oils in the Swedish heat and power industry. In order to show a green profile, bio-oils can be used in the heat and power generation. However, not all bio-oils can be viewed as climate friendly. Some production of bio-oils may actually - if a lifecycle perspective is considered - lead to increased emissions of greenhouse gases, and there are also ethical issues that need to be considered. The data collection was carried out in three different fields. The objective of the first part was to create an overview of the Swedish market for liquid bio fuels/oils for heat and power production. The second part of the study aimed to clarify the issues surrounding environmental and ethical issues associated with the use of different bio-oils. A selection of oil crops for a closer study was made based on production volume (soybean, palm oil and rapeseed) and expected future potential (jatropha). This part of the study was based on a literature review. In the third part of the study technical and practical experiences from using bio-oils in heat and power production were studied. The interviews made with purchasing managers in the second part gave valuable information on which utilities would be the most interesting to interview for the study of technical and practical experiences, where interviews were carried out with persons familiar with the daily operation of the plant. The use of liquid bio fuels was about 4.3 % of total fuel use in Swedish district heating production in 2007 (1.2 % pine oil and 3.0 % other bio-oil). In other words, it is mainly bio-oils that have been used and not other types of liquid

  5. Measures to Develop Bio-Economy

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Biological economy is referred to a kind of economy based on bilolgical resources including land living things and marine life, edpended on bvilolgical science technology and market operation of bilolgical products.

  6. Relativistic formulation and reference frame

    OpenAIRE

    Klioner, Sergei A.

    2004-01-01

    After a short review of experimental foundations of metric theories of gravity, the choice of general relativity as a theory to be used for the routine modeling of Gaia observations is justified. General principles of relativistic modeling of astronomical observations are then sketched and compared to the corresponding Newtonian principles. The fundamental reference system -- Barycentric Celestial Reference System, which has been chosen to be the relativistic reference system underlying the f...

  7. Advances in bio-inspired computing for combinatorial optimization problems

    CERN Document Server

    Pintea, Camelia-Mihaela

    2013-01-01

    Advances in Bio-inspired Combinatorial Optimization Problems' illustrates several recent bio-inspired efficient algorithms for solving NP-hard problems.Theoretical bio-inspired concepts and models, in particular for agents, ants and virtual robots are described. Large-scale optimization problems, for example: the Generalized Traveling Salesman Problem and the Railway Traveling Salesman Problem, are solved and their results are discussed.Some of the main concepts and models described in this book are: inner rule to guide ant search - a recent model in ant optimization, heterogeneous sensitive a

  8. Bio-inspired computational techniques based on advanced condition monitoring

    Institute of Scientific and Technical Information of China (English)

    Su Liangcheng; He Shan; Li Xiaoli; Li Xinglin

    2011-01-01

    The application of bio-inspired computational techniques to the field of condition monitoring is addressed.First, the bio-inspired computational techniques are briefly addressed; the advantages and disadvantages of these computational methods are made clear. Then, the roles of condition monitoring in the predictive maintenance and failures prediction and the development trends of condition monitoring are discussed. Finally, a case study on the condition monitoring of grinding machine is described, which shows the application of bio-inspired computational technique to a practical condition monitoring system.

  9. Negative Effects of Sludge Bulking in Membrane Bio-Reactor

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ying; HUANG Zhi; REN Nanqi; MENG Qingjuan

    2006-01-01

    Sludge bulking property of membrane bio-reactor was investigated in this study through contrast research. When the sludge bulking appeared, the removal efficiency of COD in membrane bio-reactor increased slightly through the function of filamentous bacteria. However, the negative effects of the higher net water-head differential pressures, the high block rate of membrane pore and the great quantity of filamentous bacteria at the external surface presented at the same time. Thus, plenty of methods should be performed to control sludge bulking once it happened in membrane bio-reactor.

  10. Upgrading of Intermediate Bio-Oil Produced by Catalytic Pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Abdullah, Zia [Battelle Memorial Inst., Columbus, OH (United States); Chadwell, Brad [Battelle Memorial Inst., Columbus, OH (United States); Taha, Rachid [Battelle Memorial Inst., Columbus, OH (United States); Hindin, Barry [Battelle Memorial Inst., Columbus, OH (United States); Ralston, Kevin [Battelle Memorial Inst., Columbus, OH (United States)

    2015-06-30

    The objectives of this project were to (1) develop a process to upgrade catalytic pyrolysis bio-oil, (2) investigate new upgrading catalysts suited for upgrading catalytic pyrolysis bio-oil, (3) demonstrate upgrading system operation for more than 1,000 hours using a single catalyst charge, and (4) produce a final upgraded product that can be blended to 30 percent by weight with petroleum fuels or that is compatible with existing petroleum refining operations. This project has, to the best of our knowledge, for the first time enabled a commercially viable bio-oil hydrotreatment process to produce renewable blend stock for transportation fuels.

  11. BIO-PROSPECTING, IPR, TRADITIONAL KNOWLEDGE AND ITS TRADE SECRETS

    Directory of Open Access Journals (Sweden)

    Lad Meenal Deepak

    2012-10-01

    Full Text Available Bio-prospecting involves searching for collecting, and deriving genetic material from samples of bio-diversity that can be used in commercialized pharmaceutical, agricultural, industrial, or chemical processing end products. Salient features of Bio-prospecting are: Conservation and sustainable use of biological diversity, Rights of traditional, indigenous knowledge holders; fair and equitable sharing of benefits arising from the research, indigenous knowledge, intellectual property, or application of biological resources. The meaningful participation in these processes by traditional, indigenous knowledge holders.As far as Bio-prospecting & final commercial manufacturing company is concerned certain larger pharmaceutical companies operate their own Bio-prospecting units. They can develop a commercial drug from an idea to Bio-prospecting for genetic material, clinical trial, manufacturing & marketing.Herbal medicines are not marketed as pharmaceuticals & are not regulated by FDA. These drugs lack in quality control & mostly sold as dietary supplements. Pharmaceutical industries ordinarily synthesize compounds from a limited amount of natural products & the Herbal medicine industries usually don’t attempt to do so because of high cost involved for the relatively low return. Pharmaceutical Bio-prospecting involves high returns & requires low volume harvesting.The convential biological diversities are an international protocol which gives expression to the novel idea that the Bio-prospecting process could yield conservation & develop benefits. The Trade-Related Aspects of Intellectual Property Rights (TRIPS Agreement under the World Trade Organization (WTO is the pre-eminent international agreement governing intellectual property rights. It covers a broad range of intellectual property rights, including copyright, trademarks, geographical indications, trade secrets, and patents. Along with TRIPS a focuses given to rights of traditional indigenous

  12. Pyrolysis of sunflower seed hulls for obtaining bio-oils.

    Science.gov (United States)

    Casoni, Andrés I; Bidegain, Maximiliano; Cubitto, María A; Curvetto, Nestor; Volpe, María A

    2015-02-01

    Bio-oils from pyrolysis of as received sunflower seed hulls (SSH), hulls previously washed with acid (SSHA) and hulls submitted to a mushroom enzymatic attack (BSSH) were analyzed. The concentration of lignin, hemicellulose and cellulose varied with the pre-treatment. The liquid corresponding to SSH presented a relatively high concentration of acetic acid and a high instability to storage. The bio-oil from SSHA showed a high concentration of furfural and an appreciable amount of levoglucosenone. Lignin was degraded upon enzymatic activity, for this reason BSSH led to the highest yield of bio-oil, with relative high concentration of acetic acid and stability to storage.

  13. User Preferences in Reference Services: Virtual Reference and Academic Libraries

    Science.gov (United States)

    Cummings, Joel; Cummings, Lara; Frederiksen, Linda

    2007-01-01

    This study examines the use of chat in an academic library's user population and where virtual reference services might fit within the spectrum of public services offered by academic libraries. Using questionnaires, this research demonstrates that many within the academic community are open to the idea of chat-based reference or using chat for…

  14. Acute Myeloid Leukemia - Genetics Home Reference [Genetics Home Reference (Conditions)

    Lifescience Database Archive (English)

    Full Text Available Conditions Genes Chromosomes Handbook Glossary Resources Conditions > Acute Myeloid...te myeloid leukemia with mutated CEBPA Fanconi anemia You may also search Genetics Home Reference for Acut...e Myeloid Leukemia for additional information. Published : October 27, 2014 Acute Myeloid Leukemia - Genetics Home Reference ...

  15. Java for dummies quick reference

    CERN Document Server

    Lowe, Doug

    2012-01-01

    A reference that answers your questions as you move through your coding The demand for Android programming and web apps continues to grow at an unprecedented pace and Java is the preferred language for both. Java For Dummies Quick Reference keeps you moving through your coding while you solve a problem, look up a command or syntax, or search for a programming tip. Whether you're a Java newbie or a seasoned user, this fast reference offers you quick access to solutions without requiring that you wade through pages of tutorial material. Leverages the true reference format that is organized with

  16. Multi-scale cellulose based new bio-aerogel composites with thermal super-insulating and tunable mechanical properties.

    Science.gov (United States)

    Seantier, Bastien; Bendahou, Dounia; Bendahou, Abdelkader; Grohens, Yves; Kaddami, Hamid

    2016-03-15

    Bio-composite aerogels based on bleached cellulose fibers (BCF) and cellulose nanoparticles having various morphological and physico-chemical characteristics are prepared by a freeze-drying technique and characterized. The various composite aerogels obtained were compared to a BCF aerogel used as the reference. Severe changes in the material morphology were observed by SEM and AFM due to a variation of the cellulose nanoparticle properties such as the aspect ratio, the crystalline index and the surface charge density. BCF fibers form a 3D network and they are surrounded by the cellulose nanoparticle thin films inducing a significant reduction of the size of the pores in comparison with a neat BCF based aerogel. BET analyses confirm the appearance of a new organization structure with pores of nanometric sizes. As a consequence, a decrease of the thermal conductivities is observed from 28mWm(-1)K(-1) (BCF aerogel) to 23mWm(-1)K(-1) (bio-composite aerogel), which is below the air conductivity (25mWm(-1)K(-1)). This improvement of the insulation properties for composite materials is more pronounced for aerogels based on cellulose nanoparticles having a low crystalline index and high surface charge (NFC-2h). The significant improvement of their insulation properties allows the bio-composite aerogels to enter the super-insulating materials family. The characteristics of cellulose nanoparticles also influence the mechanical properties of the bio-composite aerogels. A significant improvement of the mechanical properties under compression is obtained by self-organization, yielding a multi-scale architecture of the cellulose nanoparticles in the bio-composite aerogels. In this case, the mechanical property is more dependent on the morphology of the composite aerogel rather than the intrinsic characteristics of the cellulose nanoparticles.

  17. CHARACTERIZATION, BIO-FORMULATION DEVELOPMENT AND SHELF-LIFE STUDIES OF LOCALLY ISOLATED BIO-FERTILIZER STRAINS

    Directory of Open Access Journals (Sweden)

    Vipin Kumar

    2014-03-01

    Full Text Available Nitrogen fixing, phosphate solubilizing and potash mobilizing bacterial strains were isolated from rhizosphere soil of agricultural land, the isolated bacterial strains were further characterized by a series of biochemical reactions and identified as genus Azotobacter, Bacillus and Pseudomonas respectively. A technology for their mass multiplication and their bio-formulation has been developed. Fly-ash was used as carrier materials for bio-formulation development of bio-fertilizer strains. Shelf-life studies of the bio-formulations were carried out during storage period. The selected isolates were found to be potent nitrogen fixer, phosphate solubilizers showing clear halo zone around their colonies and potash mobilizer showing mobilization of potassium on respective medium. A general decline in cfu count was noticed in fly-ash based bio-formulations. All the bio-formulations however, retained more than 108 cfu/g viable propagules up to 270 days. The present studies were shown encouraging results in respect to fly-ash as carrier materials for bio-fertilizer strains which are comparable to other commercially available carrier materials.

  18. 78 FR 5165 - First Phase of the Forest Planning Process for the Bio-Region

    Science.gov (United States)

    2013-01-24

    ... Forest Service First Phase of the Forest Planning Process for the Bio-Region AGENCY: U.S.D.A. Forest... the forest planning process for the Bio-Region. SUMMARY: Come gather 'round people Wherever you roam... the Bio-Regional Assessment has begun. DATES: The Bio-Regional Assessment Report will be completed...

  19. Recycling used palm oil and used engine oil to produce white bio oil, bio petroleum diesel and heavy fuel

    Science.gov (United States)

    Al-abbas, Mustafa Hamid; Ibrahim, Wan Aini Wan; Sanagi, Mohd. Marsin

    2012-09-01

    Recycling waste materials produced in our daily life is considered as an additional resource of a wide range of materials and it conserves the environment. Used engine oil and used cooking oil are two oils disposed off in large quantities as a by-product of our daily life. This study aims at providing white bio oil, bio petroleum diesel and heavy fuel from the disposed oils. Toxic organic materials suspected to be present in the used engine oil were separated using vacuum column chromatography to reduce the time needed for the separation process and to avoid solvent usage. The compounds separated were detected by gas chromatography-mass spectrometry (GC-MS) and found to contain toxic aromatic carboxylic acids. Used cooking oils (thermally cracked from usage) were collected and separated by vacuum column chromatography. White bio oil produced was examined by GC-MS. The white bio oil consists of non-toxic hydrocarbons and is found to be a good alternative to white mineral oil which is significantly used in food industry, cosmetics and drugs with the risk of containing polycyclic aromatic compounds which are carcinogenic and toxic. Different portions of the used cooking oil and used engine were mixed to produce several blends for use as heavy oil fuels. White bio oil was used to produce bio petroleum diesel by blending it with petroleum diesel and kerosene. The bio petroleum diesel produced passed the PETRONAS flash point and viscosity specification test. The heat of combustion of the two blends of heavy fuel produced was measured and one of the blends was burned to demonstrate its burning ability. Higher heat of combustion was obtained from the blend containing greater proportion of used engine oil. This study has provided a successful recycled alternative for white bio oil, bio petroleum fuel and diesel which can be an energy source.

  20. Impact of bio-palladium nanoparticles (bio-Pd NPs) on the activity and structure of a marine microbial community.

    Science.gov (United States)

    Nuzzo, Andrea; Hosseinkhani, Baharak; Boon, Nico; Zanaroli, Giulio; Fava, Fabio

    2017-01-01

    Biogenic palladium nanoparticles (bio-Pd NPs) represent a promising catalyst for organohalide remediation in water and sediments. However, the available information regarding their possible impact in case of release into the environment, particularly on the environmental microbiota, is limited. In this study the toxicity of bio-Pd NPs on the model marine bacterium V. fischeri was assessed. The impacts of different concentrations of bio-Pd NPs on the respiratory metabolisms (i.e. organohalide respiration, sulfate reduction and methanogenesis) and the structure of a PCB-dechlorinating microbial community enriched form a marine sediment were also investigated in microcosms mimicking the actual sampling site conditions. Bio-Pd NPs had no toxic effect on V. fischeri. In addition, they had no significant effects on PCB-dehalogenating activity, while showing a partial, dose-dependent inhibitory effect on sulfate reduction as well as on methanogenesis. No toxic effects by bio-Pd NPs could be also observed on the total bacterial community structure, as its biodiversity was increased compared to the not exposed community. In addition, resilience of the microbial community to bio-Pd NPs exposure was observed, being the final community organization (Gini coefficient) of samples exposed to bio-Pd NPs similar to that of the not exposed one. Considering all the factors evaluated, bio-Pd NPs could be deemed as non-toxic to the marine microbiota in the conditions tested. This is the first study in which the impact of bio-Pd NPs is extensively evaluated over a microbial community in relevant environmental conditions, providing important information for the assessment of their environmental safety.

  1. From Waste to Healing Biopolymers: Biomedical Applications of Bio-Collagenic Materials Extracted from Industrial Leather Residues in Wound Healing

    Directory of Open Access Journals (Sweden)

    Rafael Luque

    2013-04-01

    Full Text Available The biomedical properties of a porous bio-collagenic polymer extracted from leather industrial waste residues have been investigated in wound healing and tissue regeneration in induced wounds in rats. Application of the pure undiluted bio-collagen to induced wounds in rats dramatically improved its healing after 7 days in terms of collagen production and wound filling as well as in the migration and differentiation of keratinocytes. The formulation tested was found to be three times more effective than the commercial reference product Catrix® (Heal Progress (HP: 8 ± 1.55 vs. 2.33 ± 0.52, p < 0.001; Formation of Collagen (FC: 7.5 ± 1.05 vs. 2.17 ± 0.75, p < 0.001; Regeneration of Epidermis (RE: 13.33 ± 5.11 vs. 5 ± 5.48, p < 0.05.

  2. Colloidal silicon quantum dots: from preparation to the modification of self-assembled monolayers (SAMs) for bio-applications.

    Science.gov (United States)

    Cheng, Xiaoyu; Lowe, Stuart B; Reece, Peter J; Gooding, J Justin

    2014-04-21

    Concerns over possible toxicities of conventional metal-containing quantum dots have inspired growing research interests in colloidal silicon nanocrystals (SiNCs), or silicon quantum dots (SiQDs). This is related to their potential applications in a number of fields such as solar cells, optoelectronic devices and fluorescent bio-labelling agents. The past decade has seen significant progress in the understanding of fundamental physics and surface properties of silicon nanocrystals. Such understanding is based on the advances in the preparation and characterization of surface passivated colloidal silicon nanocrystals. In this critical review, we summarize recent advances in the methods of preparing high quality silicon nanocrystals and strategies for forming self-assembled monolayers (SAMs), with a focus on their bio-applications. We highlight some of the major challenges that remain, as well as lessons learnt when working with silicon nanocrystals (239 references).

  3. Dedicated online virtual reference instruction.

    Science.gov (United States)

    Guillot, Ladonna; Stahr, Beth; Plaisance, Louise

    2005-01-01

    To facilitate nursing students' information literacy skills and enhance traditional library user services, academic librarians have developed synchronous (real-time) online virtual reference instruction in nursing research classes. The authors discuss collaborative efforts of nursing and library faculty in planning, implementing, and evaluating a discipline-specific virtual reference pilot program.

  4. The Virtual Reference Librarian's Handbook.

    Science.gov (United States)

    Lipow, Anne Grodzins

    This book is a practical guide to librarians and their administrators who are thinking about or in the early stages of providing virtual reference service. Part 1, "The Decision to Go Virtual," provides a context for thinking about virtual reference, including the benefits and problems, getting in the virtual frame of mind, and shopping…

  5. Reference counting for reversible languages

    DEFF Research Database (Denmark)

    Mogensen, Torben Ægidius

    2014-01-01

    deallocation. This requires the language to be linear: A pointer can not be copied and it can only be eliminated by deallocating the node to which it points. We overcome this limitation by adding reference counts to nodes: Copying a pointer to a node increases the reference count of the node and eliminating...

  6. Technostress and the Reference Librarian.

    Science.gov (United States)

    Kupersmith, John

    1992-01-01

    Defines "technostress" as the stress experienced by reference librarians who must constantly deal with the demands of new information technology and the changes they produce in the work place. Discussion includes suggested ways in which both organizations and individuals can work to reduce stress. (27 references) (LAE)

  7. BioMEMS for mitochondria medicine

    Science.gov (United States)

    Padmaraj, Divya

    A BioMEMS device to study cell-mitochondrial physiological functionalities was developed. The pathogenesis of many diseases including obesity, diabetes and heart failure as well as aging has been linked to functional defects of mitochondria. The synthesis of Adenosine Tri Phosphate (ATP) is determined by the electrical potential across the inner mitochondrial membrane and by the pH difference due to proton flux across it. Therefore, electrical characterization by E-fields with complementary chemical testing was used here. The BioMEMS device was fabricated as an SU-8 based microfluidic system with gold electrodes on SiO2/Si wafers for electromagnetic interrogation. Ion Sensitive Field Effect Transistors (ISFETs) were incorporated for proton studies important in the electron transport chain, together with monitoring Na+, K+ and Ca++ ions for ion channel studies. ISFETs are chemically sensitive Metal Oxide Semiconductor Field Effect Transistor (MOSFET) devices and their threshold voltage is directly proportional to the electrolytic H+ ion variation. These ISFETs (sensitivity ˜55 mV/pH for H+) were further realized as specific ion sensitive Chemical Field Effect Transistors (CHEMFETs) by depositing a specific ion sensitive membrane on the gate. Electrodes for dielectric spectroscopy studies of mitochondria were designed as 2- and 4-probe structures for optimized operation over a wide frequency range. In addition, to limit polarization effects, a 4-electrode set-up with unique meshed pickup electrodes (7.5x7.5 mum2 loops with 4 mum wires) was fabricated. Sensitivity of impedance spectroscopy to membrane potential changes was confirmed by studying the influence of uncouplers and glucose on mitochondria. An electrical model was developed for the mitochondrial sample, and its frequency response correlated with impedance spectroscopy experiments of sarcolemmal mitochondria. Using the mesh electrode structure, we obtained a reduction of 83.28% in impedance at 200 Hz. COMSOL

  8. Optical closure of parameterized bio-optical relationships

    Science.gov (United States)

    He, Shuangyan; Fischer, Jürgen; Schaale, Michael; He, Ming-xia

    2014-03-01

    An optical closure study on bio-optical relationships was carried out using radiative transfer model matrix operator method developed by Freie Universität Berlin. As a case study, the optical closure of bio-optical relationships empirically parameterized with in situ data for the East China Sea was examined. Remote-sensing reflectance ( R rs) was computed from the inherent optical properties predicted by these biooptical relationships and compared with published in situ data. It was found that the simulated R rs was overestimated for turbid water. To achieve optical closure, bio-optical relationships for absorption and scattering coefficients for suspended particulate matter were adjusted. Furthermore, the results show that the Fournier and Forand phase functions obtained from the adjusted relationships perform better than the Petzold phase function. Therefore, before bio-optical relationships are used for a local sea area, the optical closure should be examined.

  9. New BioCo binders containing biopolymers for foundry industry

    Directory of Open Access Journals (Sweden)

    B. Grabowska

    2013-01-01

    Full Text Available Possibilities of cross-linking of new polymer binders from the BioCo group, their hardening in moulding sands at the application of cross-linking agents both physical and chemical are presented. Their thermal stability was determined. It was proved, that moulding sands bound by the BioCo binders are characterised by the compression strength (Ruc of an order of 2 MPa, and the bending strength (Rug of 1 MPa, after 1 hour of a sample curing. The worked out BioCo binders are biodegradable and renewable in the part which was not completely burned. The investigated moulding sands with the BioCo binders are easily knocked out and have a good susceptibility for mechanical reclamation processes.

  10. [Bio-active substances derived from marine microorganisms].

    Science.gov (United States)

    Liu, Quanyong; Hu, Jiangchun; Xue, Delin; Ma, Chengxin; Wang, Shujin

    2002-07-01

    Marine microorganisms, which are taxonomically diverse and genetically special, have powerful potential in producing novel bio-active substances. This article summarized research progress in this respect. The results showed that marine bacteria which are main marine microorganism flora can produce rich kinds of bio-active substances and that even though marine actinomycetes and marine fungi are not as many as marine bacteria in species and quantity, they should be paid no less attention about their bio-active substances. Besides, present research are limited to those marine microorganisms which are easily cultured. One of the future research trends will be focused on bio-active substances derived from non-culturable marine microorganisms.

  11. PubChem BioAssay: 2017 update

    Science.gov (United States)

    Wang, Yanli; Bryant, Stephen H.; Cheng, Tiejun; Wang, Jiyao; Gindulyte, Asta; Shoemaker, Benjamin A.; Thiessen, Paul A.; He, Siqian; Zhang, Jian

    2017-01-01

    PubChem's BioAssay database (https://pubchem.ncbi.nlm.nih.gov) has served as a public repository for small-molecule and RNAi screening data since 2004 providing open access of its data content to the community. PubChem accepts data submission from worldwide researchers at academia, industry and government agencies. PubChem also collaborates with other chemical biology database stakeholders with data exchange. With over a decade's development effort, it becomes an important information resource supporting drug discovery and chemical biology research. To facilitate data discovery, PubChem is integrated with all other databases at NCBI. In this work, we provide an update for the PubChem BioAssay database describing several recent development including added sources of research data, redesigned BioAssay record page, new BioAssay classification browser and new features in the Upload system facilitating data sharing. PMID:27899599

  12. Wireless Distribution and Use of Bio-sensor Data

    DEFF Research Database (Denmark)

    Kyng, Morten; Kristensen, Margit; Christensen, Erika Frischknecht

    2007-01-01

      During emergency response use of wired bio-sensors create problems for the response workers. It is difficult to transport patients and checking of data requires you to be next to the patient. We will report on work in progress regarding development of a wireless bio-monitor system that supports...... distribution and use by all involved parties of bio-sensor data during emergency response. The system is being developed in close cooperation between doctors, paramedics and IT specialists using qualitative methods including ethnographically inspired field work and simulations of future work. The system...... evaluations have already demonstrated the usefulness of being able to move patients without having to take care of wires and being able to inspect bio-sensor data without being next to the patient. However, new problems have also emerged when no wires connect a patient to a display. E.g. how do you know whose...

  13. BioLandMani sünd kontrolli all

    Index Scriptorium Estoniae

    2005-01-01

    Euroopa Liidu haridusprogrammide Socrates, Leonardo ja Youth keskuse ekspertide külaskäigust Eesti Põllumajandusülikooli, et kontrollida Baltimaade ühise magistriprogrammi BioLandMan ettevalmistamist

  14. Bio- ja geenitehnoloogia keskus on loodud / Erkki Truve

    Index Scriptorium Estoniae

    Truve, Erkki, 1965-

    2002-01-01

    Tallinna Tehnikaülikooli nõukogu otsustas ümber kujundada senise materjaliteaduse ja geeni/biotehnoloogia keskuse kaheks uueks keskuseks: bio- ja geenitehnolooogia keskuseks ning materjaliteaduse keskuseks

  15. Past, Present, and Future Production of Bio-oil

    Energy Technology Data Exchange (ETDEWEB)

    Steele, Philip; Yu, Fei; Gajjela, Sanjeev

    2009-04-01

    Bio-oil is a liquid product produced by fast pyrol-ysis of biomass. The fast pyrolysis is performed by heating the biomass rapidly (2 sec) at temperatures ranging from 350 to 650 oC. The vapors produced by this rapid heating are then condensed to produce a dark brown water-based emulsion composed of frag-ments of the original hemicellulose, cellulose and lignin molecules contained in the biomass. Yields range from 60 to 75% based on the feedstock type and the pyrolysis reactor employed. The bio-oil pro-duced by this process has a number of negative prop-erties that are produced mainly by the high oxygen content (40 to 50%) contributed by that contained in water (25 to 30% of total mass) and oxygenated compounds. Each bio-oil contains hundreds of chemi-cal compounds. The chemical composition of bio-oil renders it a very recalcitrant chemical compound. To date, the difficulties in utilizing bio-oil have limited its commercial development to the production of liq-uid smoke as food flavoring. Practitioners have at-tempted to utilize raw bio-oil as a fuel; they have also applied many techniques to upgrade bio-oil to a fuel. Attempts to utilize raw bio-oil as a combustion engine fuel have resulted in engine or turbine dam-age; however, Stirling engines have been shown to successfully combust raw bio-oil without damage. Utilization of raw bio-oil as a boiler fuel has met with more success and an ASTM standard has recently been released describing bio-oil characteristics in relation to assigned fuel grades. However, commercialization has been slow to follow and no reports of distribution of these bio-oil boiler fuels have been reported. Co-feeding raw bio-oil with coal has been successfully performed but no current power generation facilities are following this practice. Upgrading of bio-oils to hydrocarbons via hydroprocessing is being performed by several organizations. Currently, limited catalyst life is the obstacle to commercialization of this tech-nology. Researchers

  16. Bio-palladium: from metal recovery to catalytic applications.

    Science.gov (United States)

    De Corte, Simon; Hennebel, Tom; De Gusseme, Bart; Verstraete, Willy; Boon, Nico

    2012-01-01

    While precious metals are available to a very limited extent, there is an increasing demand to use them as catalyst. This is also true for palladium (Pd) catalysts and their sustainable recycling and production are required. Since Pd catalysts exist nowadays mostly under the form of nanoparticles, these particles need to be produced in an environment-friendly way. Biological synthesis of Pd nanoparticles ('bio-Pd') is an innovative method for both metal recovery and nanocatalyst synthesis. This review will discuss the different bio-Pd precipitating microorganisms, the applications of the catalyst (both for environmental purposes and in organic chemistry) and the state of the art of the reactors based on the bio-Pd concept. In addition, some main challenges are discussed, which need to be overcome in order to create a sustainable nanocatalyst. Finally, some outlooks for bio-Pd in environmental technology are presented.

  17. Biological General Repository for Interaction Datasets (BioGRID)

    Data.gov (United States)

    U.S. Department of Health & Human Services — BioGRID is an online interaction repository with data on raw protein and genetic interactions from major model organism species. All interaction data are freely...

  18. Bio-inspired computation in unmanned aerial vehicles

    CERN Document Server

    Duan, Haibin

    2014-01-01

    Bio-inspired Computation in Unmanned Aerial Vehicles focuses on the aspects of path planning, formation control, heterogeneous cooperative control and vision-based surveillance and navigation in Unmanned Aerial Vehicles (UAVs) from the perspective of bio-inspired computation. It helps readers to gain a comprehensive understanding of control-related problems in UAVs, presenting the latest advances in bio-inspired computation. By combining bio-inspired computation and UAV control problems, key questions are explored in depth, and each piece is content-rich while remaining accessible. With abundant illustrations of simulation work, this book links theory, algorithms and implementation procedures, demonstrating the simulation results with graphics that are intuitive without sacrificing academic rigor. Further, it pays due attention to both the conceptual framework and the implementation procedures. The book offers a valuable resource for scientists, researchers and graduate students in the field of Control, Aeros...

  19. Bio-ecology and language: a necessary unity

    DEFF Research Database (Denmark)

    Cowley, Stephen

    2014-01-01

    -ecology. While shaped by discourse and beliefs about language-systems (and representations), the language and actions of human organism–environment systems change the world. As Garner (2004) argues, ecolinguistics can do more than invoke ‘interaction’ between language and ecology. While ‘realities’ are partly...... illuminate the dynamics which enmesh the bio-ecology, human evolution, local histories, and language. In short, part of the field’s agenda becomes that of clarifying how languaging and language affect plant–animal–human–culture formations. If the approach can be used to forge a unified perspective on the bio......The paper asks how languaging and language influence the world of the living. Extending Clements and Shelford (1939), the bio-ecology is redefined as the domain of plant–animal–human–culture formations. The move places what people do as a result of languaging into a reciprocal relation with the bio...

  20. Bio-oil from Flash Pyrolysis of Agricultural Residues

    DEFF Research Database (Denmark)

    Ibrahim, Norazana

    bio-oils. Mainly the influence of feedstock type (wheat straw, rice husk and pine wood), feedstock water content and reactor temperature on the yield of char, bio-oil and gas were investigated. The storage stability of bio-oils with respect to changes in viscosity, water content and pH were...... liquid organics yield. In addition, the chemical compositions of the bio-oils and the chars of the investigated feedstocks were also analyzed. The utilization of the pyrolysis oil in static combustion equipments such as boilers and turbine have shown that the suitability of the pyrolysis oil...... to substitute fossil fuel. However, several limitations still arise due to the instability of the pyrolysis oil that may cause problems with transport and storage. Pyrolysis oil contains more than hundred of chemical compounds and has a wide range of volatility (different boiling points). The stability...

  1. Bio-based polyurethane foams from renewable resources

    Science.gov (United States)

    Stanzione, M.; Russo, V.; Sorrentino, A.; Tesser, R.; Lavorgna, M.; Oliviero, M.; Di Serio, M.; Iannace, S.; Verdolotti, L.

    2016-05-01

    In the last decades, bio-derived natural materials, such as vegetable oils, polysaccharides and biomass represent a rich source of hydroxyl precursors for the synthesis of polyols which can be potentially used to synthesize "greener" polyurethane foams. Herein a bio-based precursor (obtained from succinic acid) was used as a partial replacement of conventional polyol to synthesize PU foams. A mixture of conventional and bio-based polyol in presence of catalysts, silicone surfactant and diphenylmethane di-isocyanate (MDI) was expanded in a mold and cured for two hours at room temperature. Experimental results highlighted the suitability of this bio-precursor to be used in the production of flexible PU foams. Furthermore the chemo-physical characterization of the resulting foams show an interesting improvement in thermal stability and elastic modulus with respect to the PU foams produced with conventional polyol.

  2. Envirobiosens. New trends in bio-sensing for environmental applications

    Energy Technology Data Exchange (ETDEWEB)

    Alcock, S. [Cranfield Biothechnology Centre, Cranfield University (United Kingdom); Cosnier, S. [Universite Joseph-Fourier, Grenoble I, Lab. d' Electrochimie Organique et de Photochimie Redox, UMR CNRS 5630, 38 (France); Magner, E. [Limerick University, Dept. of Chemical and Environmental Sciences (Ireland)] [and others

    2000-07-01

    The development of useful sensor systems to monitor multiple pollutants is needed for many environmental applications like the pollution monitoring and processing. The advantages of chemical sensors, bio-sensors and bio-mimetic systems should be exploited to fill specific niche applications in environmental engineering. Sensors offer particular advantages as they can be used for rapid field assessment of pollution risks, including the effects of pollutant mixtures. This conference reviews the current state of the art for bio-sensors operating in the environment and in environmental processes to develop bio-sensors practical applications in the environmental technology. The papers are presented in three parts: enzymatic sensors for environmental monitoring; affinity sensors for environmental application; cell and tissue sensors for environmental analysis, future prospects. (A.L.B.)

  3. Prototyping Bio-Nanorobots using Molecular Dynamics Simulation

    CERN Document Server

    Hamdi, Mustapha; Ferreira, A; Mavroidis, Constantinos

    2007-01-01

    This paper presents a molecular mechanics study using a molecular dynamics software (NAMD) coupled to virtual reality (VR) techniques for intuitive Bio-NanoRobotic prototyping. Using simulated Bio-Nano environments in VR, the operator can design and characterize through physical simulation and 3-D visualization the behavior of Bio-NanoRobotic components and structures. The main novelty of the proposed simulations is based on the characterization of stiffness performances of passive joints-based deca-alanine protein molecule and active joints-based viral protein motor (VPL) in their native environment. Their use as elementary Bio-NanoRobotic components (1 dof platform) are also simulated and the results discussed.

  4. Bio-Inspired Political Systems. Opening a Field

    CERN Document Server

    Mezza-Garcia, Nathalie

    2012-01-01

    In this paper we highlight the scopes of engineering bio-inspired political systems, which are political systems based on the properties of life that self-organize the increasing complexity of human social systems. We describe bio-inspired political systems and conjecture about various ways to get to them, most notably, metaheuristics, modeling and simulation and complexified topologies. Bio-inspired political systems operate with nature-based dynamics, inspired on the knowledge that has been acquired about complexity from natural social systems and life. Bio-inspired political systems are presented as the best alternative for organizing human sociopolitical interactions as computation and microelectronics-based technology profoundly modify the ways in which humans decide. Therefore, weakening classical political systems. For instance, dwindling top-down power structures, modifying the notion of geographical spatiality and augmenting the political granularity. We also argue that, more than a new theoretical p...

  5. Alkaline hydrothermal liquefaction of swine carcasses to bio-oil

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Ji-Lu, E-mail: triace@163.com; Zhu, Ming-Qiang; Wu, Hai-tang

    2015-09-15

    Highlights: • Swine carcasses can be converted to bio-oil by alkaline hydrothermal liquefaction. • It seems that the use of the bio-oil for heat or CHP is technically suitable. • Some valuable chemicals were found in the bio-oils. • The bio-oil and the solid residue constituted an energy efficiency of 93.63% for the feedstock. • The solid residue can be used as a soil amendment, to sequester C and for preparing activated carbon. - Abstract: It is imperative that swine carcasses are disposed of safely, practically and economically. Alkaline hydrothermal liquefaction of swine carcasses to bio-oil was performed. Firstly, the effects of temperature, reaction time and pH value on the yield of each liquefaction product were determined. Secondly, liquefaction products, including bio-oil and solid residue, were characterized. Finally, the energy recovery ratio (ERR), which was defined as the energy of the resultant products compared to the energy input of the material, was investigated. Our experiment shows that reaction time had certain influence on the yield of liquefaction products, but temperature and pH value had bigger influence on the yield of liquefaction products. Yields of 62.2 wt% bio-oil, having a high heating value of 32.35 MJ/kg and a viscosity of 305cp, and 22 wt% solid residue were realized at a liquefaction temperature of 250 °C, a reaction time of 60 min and a pH value of 9.0. The bio-oil contained up to hundreds of different chemical components that may be classified according to functional groups. Typical compound classes in the bio-oil were hydrocarbons, organic acids, esters, ketones and heterocyclics. The energy recovery ratio (ERR) reached 93.63%. The bio-oil is expected to contribute to fossil fuel replacement in stationary applications, including boilers and furnaces, and upgrading processes for the bio-oil may be used to obtain liquid transport fuels.

  6. Reference: 47 [Arabidopsis Phenome Database[Archive

    Lifescience Database Archive (English)

    Full Text Available chemical characterisation of BAN as an anthocyanidin red...ds4-1. The seed phenotype of ban tds4 double mutants showed that LDOX precedes BANYULS (BAN) in the PA pathway, confirming recent bio

  7. Characterization of the bio-oil of rapeseed cake

    Energy Technology Data Exchange (ETDEWEB)

    Culcuoglu, E.; Unay, E.; Karaosmanoglu, F. [Istanbul Technical Univ. (Turkey). Dept. of Chemical Engineering; Angin, D.; Sensoz, S. [Osman Gazi Univ., Meselik Eskisehir (Turkey). Dept. of Chemical Engineering

    2005-10-15

    Pyrolysis is the most important process in the thermal conversion processes of biomass. In this study, pyrolysis of the rapeseed cake was performed within a fixed bed reactor under static nitrogen atmosphere at 650{sup o}C pyrolysis temperature and at 15{sup o}C min{sup -1} heating rate. The various properties of bio-oil acquired under these conditions were identified. The results of bio-oil showed the green candidate fuel. (Author)

  8. Hydrothermal liquefaction of barley straw to bio-crude oil

    DEFF Research Database (Denmark)

    Zhu, Zhe; Rosendahl, Lasse; Toor, Saqib;

    2015-01-01

    Hydrothermal liquefaction (HTL) of barley straw with K2CO3 at different temperatures (280–400 C) was conducted and compared to optimize its process conditions; the aqueous phase as a co-product from this process was recycled to explore the feasibility of implementing wastewater reuse for bio...... a detailed insight into the HTL behavior of barley straw, and offers potential opportunities and benefits for bio-crude oil production through the reuse of aqueous phase....

  9. Special issue on bio-ontologies and phenotypes.

    Science.gov (United States)

    Soldatova, Larisa N; Collier, Nigel; Oellrich, Anika; Groza, Tudor; Verspoor, Karin; Rocca-Serra, Philippe; Dumontier, Michel; Shah, Nigam H

    2015-01-01

    The bio-ontologies and phenotypes special issue includes eight papers selected from the 11 papers presented at the Bio-Ontologies SIG (Special Interest Group) and the Phenotype Day at ISMB (Intelligent Systems for Molecular Biology) conference in Boston in 2014. The selected papers span a wide range of topics including the automated re-use and update of ontologies, quality assessment of ontological resources, and the systematic description of phenotype variation, driven by manual, semi- and fully automatic means.

  10. Human Factors Issues for Interaction with Bio-Inspired Swarms

    Science.gov (United States)

    2012-10-01

    subtle leaders of fish schools. Pheromone trails also suggest a way to support human interaction as has been explored to a limited extent... Human Factors issues for Interaction with Bio-Inspired Swarms Michael Lewis*, Michael Goodrich**, Katia Sycara+, Mark Steinberg++ * School of...Enabling a human to control such bio-inspired systems is a considerable challenge due to the limitations of each individual robot and the sheer

  11. Bio-Mechatronics: From Insects to In-Vivo Mechatronics

    OpenAIRE

    Vaidyanathan, Ravi

    2013-01-01

    The Department of Automatic Control & Systems Engineering is pleased to announce the following seminar: Bio-Mechatronics: From Insects to In-Vivo Mechatronics Dr Ravi Vaidyanathan Department of Mechanical Engineering Imperial College Wednesday, 25th September 2013 at 14:00, LT02, Sir Henry Stephenson Building Mechatronics is the synergistic combination of precision engineering, electronic control, and systems thinking in the design of products and manufacturing processes. Bio-Mechatron...

  12. Brief overview of BioMicroNano Technologies.

    Energy Technology Data Exchange (ETDEWEB)

    Gourley, Paul Lee

    2005-01-01

    This paper provides a brief overview of the fields of biological micro-electromechanical systems (bioMEMs) and associated nanobiotechnologies, collectively denoted as BioMicroNano. Although they are developing at a very rapid pace and still redefining themselves, several stabilized areas of research and development can be identified. Six major areas are delineated, and specific examples are discussed and illustrated. Various applications of the technologies are noted, and potential market sizes are compared.

  13. Multi-culture solar heated bio-shelter. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    A rooftop greenhouse (bio-shelter) that is heated with active and passive solar systems is presented. The intent of the greenhouse is to grow vegetables hydroponically the year-round using a nutrient flow technique; and to growth the giant tropical Malaysian prawn Macrobrachium rosenbergii in a recycling raceway water system heated with solar power. The produce grown was continuously monitored and the harvests weighed in order to estimate the year-round production potential of the bio-shelter greenhouse.

  14. Report on the 5th International Bio-logging Symposium

    Science.gov (United States)

    2014-09-30

    including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson...LONG-TERM GOALS Bio-logging originated in the marine (polar) realm, which explains why marine mammals remain today the main biological models in...www.animalbiotelemetry.com/) and Movement Ecology (http://www.movementecologyjournal.com/). A book on Bio-logging, commissioned on Springer will be

  15. Bioterrorism Preparedness Through Public Health and Medical Bio-Surveillance

    Science.gov (United States)

    2006-05-31

    viral hemorrhagic fevers (Ebola, Marburg, and Lassa ); aflatoxin; and botulinum and shigella toxins comprise some of the most dangerous bio- agents... outbreaks could occur simultaneously in multiple locations, which is less likely in a natural epidemic. 5 Contagions can spread throughout the...surveillance to detect attacks. Surveillance to detect, collect, analyze, and interpret reports of bio-events and trained staffs to monitor disease outbreaks

  16. Transformation fermière de produits Bio Suisse

    OpenAIRE

    Clerc, Maurice

    2011-01-01

    Les producteurs bio sont encouragés à mettre en valeur eux-mêmes leurs matières premières chaque fois que possible. Cela permet d’enrichir la gamme de produits écoulés en circuits courts et d’étoffer la palette des produits du terroir. Les points les plus importants de cette transformation fermière bio sont résumés ci-après.

  17. Co-publishing with BioMed Central

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>We are delighted to announce that Chinese Birds will be published in partnership with BioMed Central,part of Springer,under the Open Access model from 2014.As the leading Open Access publisher,BioMed Central will support the journal in its continued growth and development,and will promote to a broader community of audience.Beijing Forestry University will support the journal by sponsoring Article-

  18. Bio-Inspired Sampling and Reconstruction Framework for Scientific Visualization

    Science.gov (United States)

    2015-09-17

    AFRL-AFOSR-VA-TR-2015-0287 Bio - Inspired Sampling and Reconstruction Framework for Scientific Visualization Alireza Entezari UNIVERSITY OF FLORIDA...TITLE AND SUBTITLE A Bio - inspired Sampling and Reconstruction Framework for Scientific Visualization 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550...invariant representation, one can increase the quality of signal reconstruction. Moreover, the computational cost of the reconstruction process is

  19. Preparation of Bio-beads and Their Atrazine Degradation Characteristics

    Institute of Scientific and Technical Information of China (English)

    BI Hai-tao; ZHANG Lan-ying; LIU Na; ZHU Bo-lin

    2011-01-01

    Screened atrazine-mineralizing bacterium-Pseudomonas W4 was embedded inside an improved PVAH3BO3 embedment matrix to make bio-beads to degrade atrazine. The atrazine degradation characteristics were studied. The preparation procedure of bio-beads was as follows: (1) preparing a mixture of 100, 12.5, 10, 1.5 and 1 g/L PVA, bentonite(Ca), activated carbon powder, sodium alginate and centrifuged Pseudomonas W4 bacterium, respectively; (2) the mixture was dropped into a gently stirred cross linker solution(pH=6.7) and cured at 10 ℃ for 24 h.The optimal atrazine degradation conditions by bio-beads were as follows: pH=7, the auxiliary carbon source was glucose, and the concentration of glucose was greater than 325 mg/L. The bio-beads demonstrated stronger tolerance ability than the free microorganism to the increase of PCBs, hydrogen ion and hydroxide ion. SEM images show the uniform distribution of the microorganism inside bio-beads and the porous cross-linked structure of bio-beads which provides excellent mass transfer capacity.

  20. BioID Identification of Lamin-Associated Proteins.

    Science.gov (United States)

    Mehus, Aaron A; Anderson, Ruthellen H; Roux, Kyle J

    2016-01-01

    A- and B-type lamins support the nuclear envelope, contribute to heterochromatin organization, and regulate a myriad of nuclear processes. The mechanisms by which lamins function in different cell types and the mechanisms by which lamin mutations cause over a dozen human diseases (laminopathies) remain unclear. The identification of proteins associated with lamins is likely to provide fundamental insight into these mechanisms. BioID (proximity-dependent biotin identification) is a unique and powerful method for identifying protein-protein and proximity-based interactions in living cells. BioID utilizes a mutant biotin ligase from bacteria that is fused to a protein of interest (bait). When expressed in living cells and stimulated with excess biotin, this BioID-fusion protein promiscuously biotinylates directly interacting and vicinal endogenous proteins. Following biotin-affinity capture, the biotinylated proteins can be identified using mass spectrometry. BioID thus enables screening for physiologically relevant protein associations that occur over time in living cells. BioID is applicable to insoluble proteins such as lamins that are often refractory to study by other methods and can identify weak and/or transient interactions. We discuss the use of BioID to elucidate novel lamin-interacting proteins and its applications in a broad range of biological systems, and provide detailed protocols to guide new applications.

  1. The BioGRID interaction database: 2017 update

    Science.gov (United States)

    Chatr-aryamontri, Andrew; Oughtred, Rose; Boucher, Lorrie; Rust, Jennifer; Chang, Christie; Kolas, Nadine K.; O'Donnell, Lara; Oster, Sara; Theesfeld, Chandra; Sellam, Adnane; Stark, Chris; Breitkreutz, Bobby-Joe; Dolinski, Kara; Tyers, Mike

    2017-01-01

    The Biological General Repository for Interaction Datasets (BioGRID: https://thebiogrid.org) is an open access database dedicated to the annotation and archival of protein, genetic and chemical interactions for all major model organism species and humans. As of September 2016 (build 3.4.140), the BioGRID contains 1 072 173 genetic and protein interactions, and 38 559 post-translational modifications, as manually annotated from 48 114 publications. This dataset represents interaction records for 66 model organisms and represents a 30% increase compared to the previous 2015 BioGRID update. BioGRID curates the biomedical literature for major model organism species, including humans, with a recent emphasis on central biological processes and specific human diseases. To facilitate network-based approaches to drug discovery, BioGRID now incorporates 27 501 chemical–protein interactions for human drug targets, as drawn from the DrugBank database. A new dynamic interaction network viewer allows the easy navigation and filtering of all genetic and protein interaction data, as well as for bioactive compounds and their established targets. BioGRID data are directly downloadable without restriction in a variety of standardized formats and are freely distributed through partner model organism databases and meta-databases. PMID:27980099

  2. Hydrothermal liquefaction of aquatic plants to bio-oils

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, D.; Zhang, L.; Zhang, S.; Fu, H.; Chen, J. [Fudan Univ., Shanghai (China). Dept. of Environmental Science and Engineering

    2010-07-01

    This study investigated the feasibility of producing bio-oils from aquatic plants by hydrothermal liquefaction using 2 typical aquatic plants as feedstocks, notably Enteromorpha prolifera and water hyacinth which are typical aquatic plants found in seawater and freshwater. Bio-oil production from these 2 feedstocks was studied in a batch reactor at controlled temperatures under an initial partial pressure of 2.0 MPa N2. The effects of temperature and reaction time on the liquefaction products yields were also studied. GC-MS and elemental analysis were carried out to analyze the composition of bio-oils. The bio-oil produced from Enteromorpha prolifera contained mainly fatty acids, esters and quite a few heterocyclic compounds. Phenols and their derivatives were found to be the main compounds in bio-oils produced from water hyacinth. An elemental analysis revealed that bio-oils produced from the 2 aquatic plants have higher energy density. It was concluded that the use of aquatic plants as feedstock for liquid fuel can contribute to environmental protection and sustainable energy development by reducing greenhouse gas emissions associated with the burning of fossil fuels. 9 refs., 3 tabs.

  3. Bio-Based Polymers with Potential for Biodegradability

    Directory of Open Access Journals (Sweden)

    Thomas F. Garrison

    2016-07-01

    Full Text Available A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid (PLA, widely used in multiple commercial applications nowadays. There is an intrinsic expectation that bio-based polymers are also biodegradable, but in reality there is no guarantee that polymers prepared from biorenewable feedstock exhibit significant or relevant biodegradability. Biodegradability studies are therefore crucial in order to assess the long-term environmental impact of such materials. This review presents a brief overview of the different classes of bio-based polymers, with a strong focus on vegetable oil-derived resins and PLA. An entire section is dedicated to a discussion of the literature addressing the biodegradability of bio-based polymers.

  4. Social Science Insights for the BioCCS Industry

    Directory of Open Access Journals (Sweden)

    Anne-Maree Dowd

    2015-05-01

    Full Text Available BioCCS is a technology gaining support as a possible emissions reduction policy option to address climate change. The process entails the capture, transport and storage of carbon dioxide produced during energy production from biomass. Globally, the most optimistic energy efficiency scenarios cannot avoid an average temperature increase of +2 °C without bioCCS. Although very much at the commencement stage, bioCCS demonstration projects can provide opportunity to garner knowledge, achieve consensus and build support around the technology’s properties. Yet many challenges face the bioCCS industry, including no guarantee biomass will always be from sustainable sources or potentially result in carbon stock losses. The operating environment also has no or limited policies, regulations and legal frameworks, and risk and safety concerns abound. Some state the key problem for bioCCS is cultural, lacking in a ‘community of support’, awareness and credibility amongst its own key stakeholders and the wider public. Therefore, the industry can benefit from the growing social science literature, drawing upon other energy and resource based industries with regard to social choice for future energy options. To this end, the following scoping review was conducted in order to ascertain gaps in existing public perception and acceptance research focusing on bioCCS.

  5. CHARACTERIZATION OF BIO-OIL FROM PALM KERNEL SHELL PYROLYSIS

    Directory of Open Access Journals (Sweden)

    R. Ahmad

    2014-12-01

    Full Text Available Pyrolysis of palm kernel shell in a fixed-bed reactor was studied in this paper. The objectives were to investigate the effect of pyrolysis temperature and particle size on the products yield and to characterize the bio-oil product. In order to get the optimum pyrolysis parameters on bio-oil yield, temperatures of 350, 400, 450, 500 and 550 °C and particle sizes of 212–300 µm, 300–600 µm, 600µm–1.18 mm and 1.18–2.36 mm under a heating rate of 50 °C min-1 were investigated. The maximum bio-oil yield was 38.40% at 450 °C with a heating rate of 50 °C min-1 and a nitrogen sweep gas flow rate of 50 ml min-1. The bio-oil products were analysed by Fourier transform infra-red spectroscopy (FTIR and gas chromatography–mass spectroscopy (GCMS. The FTIR analysis showed that the bio-oil was dominated by oxygenated species. The phenol, phenol, 2-methoxy- and furfural that were identified by GCMS analysis are highly suitable for extraction from the bio-oil as value-added chemicals. The highly oxygenated oils need to be upgraded in order to be used in other applications such as transportation fuels.

  6. investigación en Bioética.

    Directory of Open Access Journals (Sweden)

    Daniel Meneses Carmona

    2012-01-01

    Full Text Available Este escrito esboza cuestiones acerca del lugar y el problema de la Bioética, tanto como preguntas que no tienen respuestas pre-establecidas y, como tal, exigen investigación. Como lugar, en Bioética se heredan las transformaciones de la racionalidad, la Epistemología y la Ética ocurridas en las interacciones sociales asumidas como contexto; la "Bioética" no tiene un lugar establecido y propio, se sitúa en un campo que se configura sólo al asumir la pregunta por la vida y por lo vivo. Propongo la tesis siguiente: La Bioética se constituye en la acción de introducir la vida como problema en lo cotidiano; esto conlleva la creación de nuevas sensibilidades a lo aún no sentido, lo aún no pensado, lo aún no valorado. De esta manera, el lugar de la Bioética se muestra como un juego de figuras diversas en y con las que se crean opciones de otras vidas aún no vividas y que remite a los aprendizajes como exposición al cambio y a las narrativas en las que éstos ocurren y son posibles. Esta tesis se perfila, en la perspectiva de la Bioética, como el conocimiento de cómo usar el conocimiento.

  7. Quantum Bio-Informatics:From Quantum Information to Bio-Informatics

    CERN Document Server

    Freudenberg, W; Ohya, M

    2008-01-01

    The purpose of this volume is examine bio-informatics and quantum information, which are growing rapidly at present, and to attempt to connect the two, with a view to enumerating and solving the many fundamental problems they entail. To this end, we look for interdisciplinary bridges in mathematics, physics, and information and life sciences. In particular, research into a new paradigm for information science and life science on the basis of quantum theory is emphasized. Sample Chapter(s). Markov Fields on Graphs (599 KB). Contents: Markov Fields on Graphs (L Accardi & H Ohno); Some Aspects of

  8. Project BioLex. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dahl, J.; Broechner Andersen, M.; FORCE Technology

    2007-01-15

    The usage of biomass as a renewable source of energy is an important issue for a sustainable energy supply in Denmark. Due to pioneering work, Denmark has great experience in producing energy from biomass both in large scale CHP utilities as well as in small scale application such as domestic heating. This experience has been mainly focused in the usage of traditional domestic solid biomass fuels such as wood. However, the limited amounts available of these fuels and thereby following increasing prices have triggered the interest in using other sources of biomass. Rest and waste products from the agricultural industry is one examples of biomass which has a large potential to be used as a cheap biomass fuels. Projects of using these new types of biomass fuels are often hindered by insecurity whether this new biomass source can be applied as fuel or not. Thus in order to support usage of new sources of biomass a first step is to have knowledge on properties of the biomass fuel and be able to compare these to the known traditional fuels used. The BioLex was designed to provide this information about important properties of both traditional Danish as well as new more exotic solid biomass fuels in a database available to the public via the internet. (au)

  9. Bio-inspired self-shaping ceramics

    Science.gov (United States)

    Bargardi, Fabio L.; Le Ferrand, Hortense; Libanori, Rafael; Studart, André R.

    2016-01-01

    Shaping ceramics into complex and intricate geometries using cost-effective processes is desirable in many applications but still remains an open challenge. Inspired by plant seed dispersal units that self-fold on differential swelling, we demonstrate that self-shaping can be implemented in ceramics by programming the material's microstructure to undergo local anisotropic shrinkage during heat treatment. Such microstructural design is achieved by magnetically aligning functionalized ceramic platelets in a liquid ceramic suspension, subsequently consolidated through an established enzyme-catalysed reaction. By fabricating alumina compacts exhibiting bio-inspired bilayer architectures, we achieve deliberate control over shape change during the sintering step. Bending, twisting or combinations of these two basic movements can be successfully programmed to obtain a myriad of complex shapes. The simplicity and the universality of such a bottom-up shaping method makes it attractive for applications that would benefit from low-waste ceramic fabrication, temperature-resistant interlocking structures or unusual geometries not accessible using conventional top–down manufacturing. PMID:28008930

  10. Bio-inspired self-shaping ceramics

    Science.gov (United States)

    Bargardi, Fabio L.; Le Ferrand, Hortense; Libanori, Rafael; Studart, André R.

    2016-12-01

    Shaping ceramics into complex and intricate geometries using cost-effective processes is desirable in many applications but still remains an open challenge. Inspired by plant seed dispersal units that self-fold on differential swelling, we demonstrate that self-shaping can be implemented in ceramics by programming the material's microstructure to undergo local anisotropic shrinkage during heat treatment. Such microstructural design is achieved by magnetically aligning functionalized ceramic platelets in a liquid ceramic suspension, subsequently consolidated through an established enzyme-catalysed reaction. By fabricating alumina compacts exhibiting bio-inspired bilayer architectures, we achieve deliberate control over shape change during the sintering step. Bending, twisting or combinations of these two basic movements can be successfully programmed to obtain a myriad of complex shapes. The simplicity and the universality of such a bottom-up shaping method makes it attractive for applications that would benefit from low-waste ceramic fabrication, temperature-resistant interlocking structures or unusual geometries not accessible using conventional top-down manufacturing.

  11. Rotational molding of bio-polymers

    Science.gov (United States)

    Greco, Antonio; Maffezzoli, Alfonso; Forleo, Stefania

    2014-05-01

    This paper is aimed to study the suitability of bio-polymers, including poly-lactic acid (PLLA) and Mater-Bi, for the production of hollow components by rotational molding. In order to reduce the brittleness of PLLA, the material was mixed with two different plasticizers, bis-ethyl-hexyl-phthalate (DEHP) and poly-ethylene-glycol (PEG). The materials were characterized in terms of sinterability. To this purpose, thermomechanical (TMA) analysis was performed at different heating rates, in order to identify the endset temperatures of densification and the onset temperatures of degradation. Results obtained indicated that the materials are characterized by a very fast sintering process, occurring just above the melting temperature, and an adequately high onset of degradation. The difference between the onset of degradation and the endset of sintering, defined as the processing window of the polymer, is sufficiently wide, indicating that the polymers can be efficiently processed by rotational molding. Therefore, a laboratory scale apparatus was used for the production of PLLA and Mater-Bi prototypes. The materials were processed using very similar conditions to those used for LLDPE. The production of void-free samples of uniform wall thickness was considered as an indication of the potentiality of the process for the production of biodegradable containers.

  12. O electrolyte for bio-application

    Science.gov (United States)

    Naddaf, M.; Almariri, A.

    2014-09-01

    Porous silicon (PS) has been prepared in the dark by anodic etching of n+-type (111) silicon substrate in a HF:HCl:C2H5OH:H2O2:H2O electrolyte. The processed PS layer is characterized by means of photoluminescence (PL) spectroscopy, scanning electron microscope (SEM), water contact angle (CA) measurements, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and micro-Raman scattering. The CA of fresh PS layer is found to be ~142°. On aging at ambient conditions, the CA decreases gently to reach ~133° after 3 month, and then it is stabilized for a prolonged time of aging. The visible PL emission from the PS layer also exhibits a good stability against aging time. The FTIR and XPS measurements and analysis show that the stable aged PS layer has rather SiO2-rich surface. The micro/nanostructure nature of the PS layer is revealed from SEM and micro-Raman results and correlated to CA results. Stable hydrophobic surface of oxidized PS layer is attractive for bio-applications. The efficiency of the produced PS layers as an entrapping template for specific immobilization of IgG2a antibody via physical absorption process is demonstrated.

  13. A New Bio-based Dielectric Material.

    Science.gov (United States)

    Zhan, Mingjiang; Wool, Richard P.

    2007-03-01

    Low dielectric constant (low-k) materials are widely used in modern high-speed microelectronics, such as printed circuit boards. A new bio-based composite was developed from soybean oil and chicken feather fibers, which has the potential to replace currently used petroleum-based dielectrics. Feather fibers have a unique hollow structure which distinguishes them from glass fibers and give very attractive properties. Due to the retained air in the hollow fibers, the dielectric constant can be lower than conventional epoxy-based dielectrics at both low and high frequencies. The coefficients of thermal expansion (CTE) of the materials decrease with addition of feather fibers and even can be negative. By controlling the fraction of fibers, delamination caused by CTE mismatch between the dielectric and the metal lines can be avoided. The enhancement of adhesion between copper surface and polymer matrix was investigated. The tough structure of fibers significantly improved the mechanical properties of the composites, such as flexural properties and storage modulus. Supported by USDA

  14. Bio-flex obtained from pyrolysis of biomass as fuel; Bio-flex obtido da pirolise de biomassa como combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Mesa Perez, Juan Miguel; Viltre Rodriguez, Roberto Alfonso; Marin Mesa, Henry Ramon [Bioware Tecnologia, Campinas, SP (Brazil); Rocha, Jose Dilcio [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico; Samaniego, Manuel Raul Pelaez [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Planejamento de Sistemas Energeticos; Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola

    2006-07-01

    This paper describes the BIOWARE experience in the bio fuel production from biomass residues. Fast pyrolysis of a mixture of sugar cane trash and elephant grass carried out in a fluidized bed reactor with capacity of 200 kg/h dry feed (12% w/w). The co-products particulate charcoal, acid extract, and bio-oil were obtained. The fast pyrolysis pilot plant PPR-200 belonged to UNICAMP and is operated by BIOWARE personnel. This paper presents the chemical rote to bio-flex production (a kind of bio diesel from acid esterification) from pyrolytic carboxylic acids. Both ethanol and methanol were used as reactant but higher yields were found with methanol. (author)

  15. Bio-oils and other bio fuels used in heat- and power generation; Flytande biobraenslen foer el- och vaermeproduktion

    Energy Technology Data Exchange (ETDEWEB)

    Sandgren, Annamaria; Ekdahl, Emma; Sernhed, Kerstin; Lindstroem, Erica

    2010-05-15

    The purpose of this study was to assemble and disseminate knowledge about bio-oils and other bio fuels which are used for heat- and power generation or liquid bio fuels/oils that may become interesting in the future. One aim of this study was to give an updated picture of the Swedish market for bio-oils and to provide an overview of practical experience on the usage of bio-oils in the Swedish heat and power industry. In order to show a green profile, bio-oils can be used in the heat and power generation. However, not all bio-oils can be viewed as climate friendly. Some production of bio-oils may actually - if a lifecycle perspective is considered - lead to increased emissions of greenhouse gases, and there are also ethical issues that need to be considered. The data collection was carried out in three different fields. The objective of the first part was to create an overview of the Swedish market for liquid bio fuels/oils for heat and power production. The second part of the study aimed to clarify the issues surrounding environmental and ethical issues associated with the use of different bio-oils. A selection of oil crops for a closer study was made based on production volume (soybean, palm oil and rapeseed) and expected future potential (jatropha). This part of the study was based on a literature review. In the third part of the study technical and practical experiences from using bio-oils in heat and power production were studied. The interviews made with purchasing managers in the second part gave valuable information on which utilities would be the most interesting to interview for the study of technical and practical experiences, where interviews were carried out with persons familiar with the daily operation of the plant. The use of liquid bio fuels was about 4.3 % of total fuel use in Swedish district heating production in 2007 (1.2 % pine oil and 3.0 % other bio-oil). In other words, it is mainly bio-oils that have been used and not other types of liquid

  16. The Preliminaries of a Reference

    DEFF Research Database (Denmark)

    Butler, Graham; Sadl, Urska

    2017-01-01

    by the reasons why the Court after an oral hearing held in the presence of the parties and eight intervening Member States, and after hearing the Advocate General did not deliver one. The comment examines the legal framework, as well as the detailed procedural rules and guidelines that govern the cooperation...... of national courts in the preliminary reference procedure. It highlights the fact that preliminary references can only work when the preliminaries of a reference – the culture of sincere cooperation and litigation, efficient communication and flexible procedural rules – are in place....

  17. Development and characterization of a new bio-nanocomposite (bio-NCP) for diagnosis and treatment of breast cancer

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Murillo L., E-mail: murillolongo@gmail.com [Niels Bohr Institute, University of Copenhagen, DK-2100 Copenhagen (Denmark); Instituto de Biociências – Universidade Estadual Paulista – CP 510, 18618-970 Botucatu, SP (Brazil); Saeki, Margarida Juri [Instituto de Biociências – Universidade Estadual Paulista – CP 510, 18618-970 Botucatu, SP (Brazil); Telling, Mark T.F. [ISIS, Rutherford Appleton Laboratory, Chilton, Didcot OX11 OQX (United Kingdom); Department of Materials, University of Oxford, Parks Road, Oxford (United Kingdom); Parra, Joao P.R.L.L. [Instituto de Biociências – Universidade Estadual Paulista – CP 510, 18618-970 Botucatu, SP (Brazil); Landsgesell, Sven [Helmholtz–Zentrum Berlin für Materialien und Energie, Hahn-Meitner Platz 1, D-14109 Berlin (Germany); Smith, Ron I. [ISIS, Rutherford Appleton Laboratory, Chilton, Didcot OX11 OQX (United Kingdom); Bordallo, Heloisa N. [Niels Bohr Institute, University of Copenhagen, DK-2100 Copenhagen (Denmark)

    2014-01-25

    Highlights: • We synthesized a magnetic bio-NCP with potential to be used against breast cancer. • The magnetic nanoparticles have an inverted spinel structure. • The coating with chitosan does not cause changes to the particle microstructure. • The hydration level of bio-NCP is crucial to the surface modification with apatite. • Bio-NCP with narrow size distribution and high magnetic response was obtained. -- Abstract: Breast cancer is a public health problem throughout the world. Moreover, breast cancer cells have a great affinity for hydroxyapatite, leading to a high occurrence of bone metastasis. In this work we developed a bio-nanocomposite (bio-NCP) in order to use such affinity in the diagnosis and treatment of breast cancer. The bio-NCP consists of magnetic nanoparticles of Mn and Zn ferrite inside a polymeric coating (chitosan) modified with nanocrystals of apatite. The materials were characterized with synchrotron X-ray Powder Diffraction (XPD), Time-of-Flight Neutron Powder Diffraction (NPD), Fourier Transformed Infra-red Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and magnetic measurement with a Physical Property Measurement System (PPMS). We obtained ferrite nanoparticles with a high inversion degree of the spinel structure regarding the Fe and Mn, but with all the Zn in the A site. The coating of such nanoparticles with chitosan had no notable effects to the ferrite microstructure. In addition, the polymeric surface can be easily modified with apatite nanocrystals since the hydration of the bio-NCP during synthesis can be controlled. The resulting bio-NCP presents a spherical shape with a narrow size distribution and high magnetic response at room temperature and is a very promising material for early diagnosis of breast cancer and its treatment.

  18. Paracoccus denitrificans possesses two BioR homologs having a role in regulation of biotin metabolism.

    Science.gov (United States)

    Feng, Youjun; Kumar, Ritesh; Ravcheev, Dmitry A; Zhang, Huimin

    2015-08-01

    Recently, we determined that BioR, the GntR family of transcription factor, acts as a repressor for biotin metabolism exclusively distributed in certain species of α-proteobacteria, including the zoonotic agent Brucella melitensis and the plant pathogen Agrobacterium tumefaciens. However, the scenario is unusual in Paracoccus denitrificans, another closely related member of the same phylum α-proteobacteria featuring with denitrification. Not only does it encode two BioR homologs Pden_1431 and Pden_2922 (designated as BioR1 and BioR2, respectively), but also has six predictive BioR-recognizable sites (the two bioR homolog each has one site, whereas the two bio operons (bioBFDAGC and bioYB) each contains two tandem BioR boxes). It raised the possibility that unexpected complexity is present in BioR-mediated biotin regulation. Here we report that this is the case. The identity of the purified BioR proteins (BioR1 and BioR2) was confirmed with LC-QToF-MS. Phylogenetic analyses combined with GC percentage raised a possibility that the bioR2 gene might be acquired by horizontal gene transfer. Gel shift assays revealed that the predicted BioR-binding sites are functional for the two BioR homologs, in much similarity to the scenario seen with the BioR site of A. tumefaciens bioBFDAZ. Using the A. tumefaciens reporter system carrying a plasmid-borne LacZ fusion, we revealed that the two homologs of P. denitrificans BioR are functional repressors for biotin metabolism. As anticipated, not only does the addition of exogenous biotin stimulate efficiently the expression of bioYB operon encoding biotin transport/uptake system BioY, but also inhibits the transcription of the bioBFDAGC operon resembling the de novo biotin synthetic pathway. EMSA-based screening failed to demonstrate that the biotin-related metabolite is involved in BioR-DNA interplay, which is consistent with our former observation with Brucella BioR. Our finding defined a complex regulatory network for biotin

  19. Environmental consequences of processing manure to produce mineral fertilizer and bio-energy.

    Science.gov (United States)

    De Vries, J W; Groenestein, C M; De Boer, I J M

    2012-07-15

    Liquid animal manure and its management contributes to environmental problems such as, global warming, acidification, and eutrophication. To address these environmental issues and their related costs manure processing technologies were developed. The objective here was to assess the environmental consequences of a new manure processing technology that separates manure into a solid and liquid fraction and de-waters the liquid fraction by means of reverse osmosis. This results in a liquid mineral concentrate used as mineral nitrogen and potassium fertilizer and a solid fraction used for bio-energy production or as phosphorus fertilizer. Five environmental impact categories were quantified using life cycle assessment: climate change (CC), terrestrial acidification (TA), marine eutrophication (ME), particulate matter formation (PMF), and fossil fuel depletion (FFD). For pig as well as dairy cattle manure, we compared a scenario with the processing method and a scenario with additional anaerobic digestion of the solid fraction to a reference situation applying only liquid manure. Comparisons were based on a functional unit of 1 ton liquid manure. System boundaries were set from the manure storage under the animal house to the field application of all end products. Scenarios with only manure processing increased the environmental impact for most impact categories compared to the reference: ME did not change, whereas, TA and PMF increased up to 44% as a result of NH3 and NO(x) emissions from processing and storage of solid fraction. Including digestion reduced CC by 117% for pig manure and 104% for dairy cattle manure, mainly because of substituted electricity and avoided N2O emission from storage of solid fraction. FFD decreased by 59% for pig manure and increased 19% for dairy cattle manure. TA and PMF remained higher compared to the reference. Sensitivity analysis showed that CH4 emission from manure storage, NH3 emission from processing, and the replaced nitrogen

  20. Functional tooth restoration by next-generation bio-hybrid implant as a bio-hybrid artificial organ replacement therapy.

    Science.gov (United States)

    Oshima, Masamitsu; Inoue, Kaoru; Nakajima, Kei; Tachikawa, Tetsuhiko; Yamazaki, Hiromichi; Isobe, Tomohide; Sugawara, Ayaka; Ogawa, Miho; Tanaka, Chie; Saito, Masahiro; Kasugai, Shohei; Takano-Yamamoto, Teruko; Inoue, Takashi; Tezuka, Katsunari; Kuboki, Takuo; Yamaguchi, Akira; Tsuji, Takashi

    2014-01-01

    Bio-hybrid artificial organs are an attractive concept to restore organ function through precise biological cooperation with surrounding tissues in vivo. However, in bio-hybrid artificial organs, an artificial organ with fibrous connective tissues, including muscles, tendons and ligaments, has not been developed. Here, we have enveloped with embryonic dental follicle tissue around a HA-coated dental implant, and transplanted into the lower first molar region of a murine tooth-loss model. We successfully developed a novel fibrous connected tooth implant using a HA-coated dental implant and dental follicle stem cells as a bio-hybrid organ. This bio-hybrid implant restored physiological functions, including bone remodelling, regeneration of severe bone-defect and responsiveness to noxious stimuli, through regeneration with periodontal tissues, such as periodontal ligament and cementum. Thus, this study represents the potential for a next-generation bio-hybrid implant for tooth loss as a future bio-hybrid artificial organ replacement therapy.

  1. Bio-Diesel production and Effect of Catalytic Converter on Emission performance with Bio-Diesel Blends

    Directory of Open Access Journals (Sweden)

    R.Murali Manohar

    2010-06-01

    Full Text Available Bio-Diesel the word itself defines almost all the features of the Bio-Diesel literary. In the Era of this Global Warming where the people are making their living more and more comfortable and they are deteriorating the environment also. The uses of the automobiles with the conventional source of fuel leads to the production of the toxic gaseous substances like carbon monoxide, carbon dioxide, oxides of nitrogen, oxide of sulphur, hydro-carbons etc. The limitation comes with the rise in the price of the fuel as well as the produce of the green house gases as the exhaust gas. In the present study, a new method has been employed to produce Bio-Diesel in a homely basis. Theproduction of the Bio-Diesel is done by using Bio-Diesel processor. It requires the used vegetable oil, methanol and the lye with the accurate proportionate. Generally, emissions of regulated compounds changed linearly with the blend level. The objective is to detect any posit ive or negative effects depending on blend levels, because conventional diesel fuel and biodiesel can be blended in every ratio. The known positive and negative effects of biodiesel varied accordingly and investigate the effect of Catalytic Converter on emission performance with Bio- Diesel Blends.

  2. The Role of Bio-productivity on Bio-energy Yields

    Directory of Open Access Journals (Sweden)

    Marc J. J. Janssens

    2009-04-01

    Full Text Available The principal photosynthetic pathways convert solar energy differently depending on the environmental conditions and the plant morphotype. Partitioning of energy storage within crops will vary according to environmental and seasonal conditions as well. Highest energy concentration is found in terpens like latex and, to a lesser extent, in lipids. Ideally, we want plant ingredients with high energy content easily amenable to ready-to-use bio-fuel. Generally, these crops are adapted to drier areas and tend to save on eco-volume space. Competition with food crops could be avoided by fetching energy from cheap agricultural by-products or waste products such as bagasse in the sugar cane. This would in fact mean that reducing power of agricultural residues should be extracted from the biomass through non-photosynthetic processes like animal ingestion or industrial bio-fermentation. Conversion and transformation efficiencies in the production chain are illustrated for some relevant crops in the light of the maximum power theorem.

  3. 基于BioWin的MBR工艺模拟%Bio Win-based MBR process modeling

    Institute of Scientific and Technical Information of China (English)

    艾冰; 郝二成; 顾剑; 许世伟; 李胜田; 周军

    2011-01-01

    以实际运行污水处理厂MBR工艺为研究对象,利用BioWinTM软件平台及其内嵌的通用活性污泥模型和厌氧消化模型(ASDM),建立了工艺模拟模型并进行初步模拟及校正,利用校正的模型对MBR工艺的运行参数进行了模拟分析,得到出水水质对工艺参数的敏感度,从而总结出了部分运行指南.%Taking the actual operating MBR process in wastewater treatment plant as the object, and using the BioWinTM software platform and the embedded general activated sludge/anaerobic digestion model (ASDM), this paper set up a process simulation model and carried the primary simulation and calibration. The simulation analysis of the MBR operation parameters was carried out with the calibrated model, and the sensitivity of the water quality to the process parameters was figured out and partial operation manual was also summarized.

  4. Genetics Home Reference: warfarin resistance

    Science.gov (United States)

    ... novel VKORC1 mutations associated with oral anticoagulant resistance: insights into improved patient diagnosis and treatment. J Thromb ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  5. Genetics Home Reference: Canavan disease

    Science.gov (United States)

    ... disease, a rare early-onset human spongiform leukodystrophy: insights into its genesis and possible clinical interventions. Biochimie. ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  6. Genetics Home Reference: Vohwinkel syndrome

    Science.gov (United States)

    ... of connexins in ear and skin physiology - functional insights from disease-associated mutations. Biochim Biophys Acta. 2013 ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  7. Genetics Home Reference: Larsen syndrome

    Science.gov (United States)

    ... affinity in the absence of major structural disturbance: Insights from the crystal structures of filamin B actin ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  8. Genetics Home Reference: Brugada syndrome

    Science.gov (United States)

    ... rare variation in arrhythmia-susceptibility genes provides new insights into molecular diagnosis for Brugada syndrome. Hum Mol ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  9. Genetics Home Reference: psoriatic arthritis

    Science.gov (United States)

    ... PubMed Nograles KE, Brasington RD, Bowcock AM. New insights into the pathogenesis and genetics of psoriatic arthritis. ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  10. Genetics Home Reference: boomerang dysplasia

    Science.gov (United States)

    ... affinity in the absence of major structural disturbance: Insights from the crystal structures of filamin B actin ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  11. Genetics Home Reference: Meckel syndrome

    Science.gov (United States)

    ... genetics and pathogenic mechanisms for the severe ciliopathies: insights into neurodevelopment and pathogenesis of neural tube defects. ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  12. Genetics Home Reference: Brody myopathy

    Science.gov (United States)

    ... Kuppevelt TH, Ferlini A, Tomelleri G. Brody disease: insights into biochemical features of SERCA1 and identification of ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  13. Genetics Home Reference: hidradenitis suppurativa

    Science.gov (United States)

    ... JN. γ-Secretase mutations in hidradenitis suppurativa: new insights into disease pathogenesis. J Invest Dermatol. 2013 Mar; ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  14. Genetics Home Reference: Wolfram syndrome

    Science.gov (United States)

    ... V. Genotypic classification of patients with Wolfram syndrome: insights into the natural history of the disease and ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  15. Crescent Lake Wilderness Reference Sheet

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Reference sheet includes information about Crescent Lake National Wildlife Refuge, and results of the public hearing for Crescent Lake Wilderness Proposal.

  16. World Reference Center for Arboviruses.

    Science.gov (United States)

    1985-01-01

    viruses from many parts of the world. 7 %, 1.1%vl ’ e- "., Distribution of reagents. The reference center distributed 970 ampoules of reference sera...eight pools of Culiseta melanura collected during 1984 as part of a field study on Lyme disease and other zoonoses in Connecticut. A ninth strain was...dense amorphous masses, were present also in the cytoplasm. Smooth-surfaced reticula occurred in the cytoplasm and contained viral particles in

  17. Virtual reference: chat with us!

    Science.gov (United States)

    Lapidus, Mariana; Bond, Irena

    2009-01-01

    Virtual chat services represent an exciting way to provide patrons of medical libraries with instant reference help in an academic environment. The purpose of this article is to examine the implementation, marketing process, use, and development of a virtual reference service initiated at the Massachusetts College of Pharmacy and Health Sciences and its three-campus libraries. In addition, this paper will discuss practical recommendations for the future improvement of the service.

  18. TclTk Pocket Reference

    CERN Document Server

    Raines, Paul

    1998-01-01

    The Tcl/Tk combination is increasingly popular because it lets you produce sophisticated graphical interfaces with a few easy commands, develop and change scripts quickly, and conveniently tie together existing utilities or programming libraries. The Tcl/Tk Pocket Reference,a handy reference guide to the basic Tcl language elements, Tcl and Tk commands, and Tk widgets, is a companion volume to Tcl/Tk in a Nutshell.

  19. Referring Expressions: A Unified Approach

    Institute of Scientific and Technical Information of China (English)

    K.M. Jaszczolt

    2001-01-01

    @@ 0. Introduction Expressions used by speakers to refer are commonly divided into two categories: that of directly referring expressions and that of expressions whose referring function is secured by the context of utterance. Directly referring expressions are normally said to include proper names, some pronouns including demonstrative, and demonstrative phrases. The other category comprises mainly definite and indefinite descriptions, the first being their most acclaimed representative. Definite descriptions are widely acknowledged to have referential uses. They are not referring expressions, so to speak, by default,but rather as a result of a contextually determined interpretation. As a category, they are frequently said to belong with quantifiers (Neale 1990; Recanati 1993). However, the arguments for classifying them with referring expressions are ample (Bach 1987a; Larson & Segal 1995; Brown 1995; Jaszczolt 1997a,1997b, 1999b). It is argued in Part I of this paper that although definite descriptions exhibit an ambiguity of use between the referential and the attributive reading, they also exhibit the property of having an unmarked, salient interpretation which makes them akin to directly referential terms. This salient reading is the referential interpretation, arrived at with the help of the hearer′s presumption of the presence of strong referential intention that supports the speaker′s utterance.

  20. Korean Reference HLW Disposal System

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heui Joo; Lee, J. Y.; Kim, S. S. (and others)

    2008-03-15

    This report outlines the results related to the development of Korean Reference Disposal System for High-level radioactive wastes. The research has been supported around for 10 years through a long-term research plan by MOST. The reference disposal method was selected via the first stage of the research during which the technical guidelines for the geological disposal of HLW were determined too. At the second stage of the research, the conceptual design of the reference disposal system was made. For this purpose the characteristics of the reference spent fuels from PWR and CANDU reactors were specified, and the material and specifications of the canisters were determined in term of structural analysis and manufacturing capability in Korea. Also, the mechanical and chemical characteristics of the domestic Ca-bentonite were analyzed in order to supply the basic design parameters of the buffer. Based on these parameters the thermal and mechanical analysis of the near-field was carried out. Thermal-Hydraulic-Mechanical behavior of the disposal system was analyzed. The reference disposal system was proposed through the second year research. At the final third stage of the research, the Korean Reference disposal System including the engineered barrier, surface facilities, and underground facilities was proposed through the performance analysis of the disposal system.

  1. Predicting ADME properties and side effects: the BioPrint approach.

    Science.gov (United States)

    Krejsa, Cecile M; Horvath, Dragos; Rogalski, Sherri L; Penzotti, Julie E; Mao, Boryeu; Barbosa, Frédérique; Migeon, Jacques C

    2003-07-01

    Computational methods are increasingly used to streamline and enhance the lead discovery and optimization process. However, accurate prediction of absorption, distribution, metabolism and excretion (ADME) and adverse drug reactions (ADR) is often difficult, due to the complexity of underlying physiological mechanisms. Modeling approaches have been hampered by the lack of large, robust and standardized training datasets. In an extensive effort to build such a dataset, the BioPrint database was constructed by systematic profiling of nearly all drugs available on the market, as well as numerous reference compounds. The database is composed of several large datasets: compound structures and molecular descriptors, in vitro ADME and pharmacology profiles, and complementary clinical data including therapeutic use information, pharmacokinetics profiles and ADR profiles. These data have allowed the development of computational tools designed to integrate a program of computational chemistry into library design and lead development. Models based on chemical structure are strengthened by in vitro results that can be used as additional compound descriptors to predict complex in vivo endpoints. The BioPrint pharmacoinformatics platform represents a systematic effort to accelerate the process of drug discovery, improve quantitative structure-activity relationships and develop in vitro/in vivo associations. In this review, we will discuss the importance of training set size and diversity in model development, the implementation of linear and neighborhood modeling approaches, and the use of in silico methods to predict potential clinical liabilities.

  2. Integrated ray tracing simulation of spectral bio-signatures from full 3D earth model

    Science.gov (United States)

    Ryu, Dongok; Seong, Sehyun; Lee, Jae-Min; Hong, Jinsuk; Jeong, Soomin; Jeong, Yukyeong; Kim, Sug-Whan

    2009-08-01

    Accurate identification and understanding of spectral bio-signatures from possible extra terrestrial planets have received an ever increasing attention from both astronomy and space science communities in recent years. In pursuance of this subject, one of the most important scientific breakthroughs would be to obtain the detailed understanding on spectral biosignatures of the Earth, as it serves as a reference datum for accurate interpretation of collapsed (in temporal and spatial domains) information from the spectral measurement using TPF instruments. We report a new Integrated Ray Tracing (IRT) model capable of computing various spectral bio-signatures as they are observed from the Earth surface. The model includes the Sun, the full 3-D Earth, and an optical instrument, all combined into single ray tracing environment in real scale. In particular, the full 3-D Earth surface is constructed from high resolution coastal line data and defined with realistic reflectance and BSDF characteristics depending on wavelength, vegetation types and their distributions. We first examined the model validity by confirming the imaging and radiometric performance of the AmonRa visible channel camera, simulating the Earth observation from the L1 halo orbit. We then computed disk averaged spectra, light curves and NDVI indexes, leading to the construction of the observed disk averaged spectra at the AmonRa instrument detector plane. The model, computational procedure and the simulation results are presented. The future plan for the detailed spectral signature simulation runs for various input conditions including seasonal vegetation changes and variable cloud covers is discussed.

  3. BioCluster:Tool for Identification and Clustering of Enterobacteriaceae Based on Biochemical Data

    Institute of Scientific and Technical Information of China (English)

    Ahmed Abdullah; S.M.Sabbir Alam; Munawar Sultana; M.Anwar Hossain

    2015-01-01

    Presumptive identification of different Enterobacteriaceae species is routinely achieved based on biochemical properties. Traditional practice includes manual comparison of each biochem-ical property of the unknown sample with known reference samples and inference of its identity based on the maximum similarity pattern with the known samples. This process is labor-intensive, time-consuming, error-prone, and subjective. Therefore, automation of sorting and sim-ilarity in calculation would be advantageous. Here we present a MATLAB-based graphical user interface (GUI) tool named BioCluster. This tool was designed for automated clustering and iden-tification of Enterobacteriaceae based on biochemical test results. In this tool, we used two types of algorithms, i.e., traditional hierarchical clustering (HC) and the Improved Hierarchical Clustering (IHC), a modified algorithm that was developed specifically for the clustering and identification of Enterobacteriaceae species. IHC takes into account the variability in result of 1–47 biochemical tests within this Enterobacteriaceae family. This tool also provides different options to optimize the clus-tering in a user-friendly way. Using computer-generated synthetic data and some real data, we have demonstrated that BioCluster has high accuracy in clustering and identifying enterobacterial species based on biochemical test data. This tool can be freely downloaded at http://microbialgen.du.ac.bd/biocluster/.

  4. Governing at a distance: social marketing and the (bio) politics of responsibility.

    Science.gov (United States)

    Crawshaw, Paul

    2012-07-01

    In the recently published lectures from the College de France series, The Birth of Bio-Politics, Foucault (2009) offers his most explicit analysis of neo-liberal governmentality and its impact upon states and societies in the late twentieth century. Framed in terms of the bio-political as a mode of governance of populations and its relationship to neo-liberalism, these lectures offer a rich seam of theoretical resources with which to interrogate contemporary forms of governmentality. This paper seeks to apply these and some recent critical analysis by Foucauldian scholars, to the study of health governance, with particular reference to the use of social marketing as a strategy to improve the health of populations 'at a distance'. Reflecting a broader decollectivisation of welfare, such strategies are identified as exemplars of neo-liberal methods of governance through inculcating self management and individualisation of responsibility for health and wellbeing. Drawing on original empirical data collected with a sample of fifty long term unemployed men in 2009, this paper critically examines social marketing as a newer feature of health governance and reflects upon participants' responses to it as a strategy in the context of their wider understandings of health, choice and responsibility.

  5. What is life? Bio-physical perspectives.

    Science.gov (United States)

    Gladyshev, G P

    2009-01-01

    Life arises and develops in gravitationally bound atomic systems, under certain conditions, in the presence of the inflow of energy. A condition of structural dynamic reactivity to the energy inflow qualifies what are anthropomorphically considered as "alive objects". Alive objects, in this perspective, include such rudimentary animate atomic structures as the retinal molecule C20H28o to the herpes simplex virus C102H152N26o29 to the human being, a twenty-six element atomic structure, which can be quantified further as thermodynamic quasi-closed supramolecular systems, which are part of natural open systems. These systems appear and evolve in periodic conditions near to internal equilibrium. This systems attribute of dynamic life can be understood further by the determination and use of mathematical "state functions", which are functions that quantify the state of a system defined by the ensemble of physical quantities: temperature, pressure, composition, etc., which characterize the system, but neither by its surroundings nor by its history. In this view, the phenomenon of a life is easily understood as a general consequence of the laws of the universe, in particular, the laws of thermodynamics, which in the geocentric perspective translate to a formulation of "hierarchical thermodynamics" and a "principle of substance stability". The formation of living thermodynamic structures, in short, arises on the nanolevel by a constantly varying environment that causes variety of living forms. The definition of a life as the bio-chemical-physical phenomenon can thus be given on the basis of the exact sciences, i. e. chemistry, physics, and thermodynamics, without mention of numerous private attributes of a living substance and without physically baseless models of mathematical modeling, such as Prigoginean thermodynamics.

  6. VISCOSITY ANALYSIS OF EMPTY FRUIT BUNCH (EFB BIO-OIL

    Directory of Open Access Journals (Sweden)

    Z.S. Nazirah

    2013-12-01

    Full Text Available Empty fruit bunches (EFB are one of the solid wastes produced by the palm oil industry, which is increasing rapidly. The aim of this paper is to analyse the viscosity of empty fruit bunch (EFB bio-oil that can be extracted from all solid waste EFB as a sample, and a few processes were executed. The samples underwent two processes, which were pre-treatment and pyrolysis. The pre-treatment involved three processes, namely, cutting, shredding and sieving, which were necessary in order to prepare EFB into a particle size suitable for the reactor. After that, the samples were fed into the feedback reactor as feedstock for the pyrolysis process to produce bio-oil. Once the bio-oil was produced, its viscosity was tested using the Brookfield Viscometer in two conditions: before and after the chemical reaction. The bio-oil was treated by adding 10 ml and 20 ml of acetone respectively through the chemical reaction. The viscosity test was carried out at different temperatures, which were 25°C, 30°C, 35°C, 40°C, 45°C and 50°C respectively. The observed viscosity of the EFB bio-oil varied and was higher as the temperature decreased. In addition, the viscosity of the EFB bio-oil was higher when it reacted chemically with the acetone added. Therefore, the results showed that the chemical reaction with acetone has the potential to increase the viscosity of EFB bio-oil.

  7. Culture of osteoblasts on bio-derived bones

    Institute of Scientific and Technical Information of China (English)

    LAN Xu; YANG Zhi-ming; GE Bao-feng; LIU Xue-mei

    2005-01-01

    Objective: To study the effect of bio-derived bones, as substitutes of autogenous bone grafts and demineralized cadaver bones, on the attachment, spreading and proliferation of isolated osteoblasts. Methods: Osteoblasts were isolated from the calvaria of a fetal rabbit through sequential collagenase digestion. In the attachment study, the osteoblasts labeled with 3H-leucine were incubated with the bio-derived bone materials in sterile microcentrifugale tubes for 15, 90 and 180 minutes, and 24 hours, respectively. The attached cells were collected and the radioactivity was measured with liquid scintillation spectrometry. In the proliferation study, the osteoblasts were cultured with the bio-derived bone materials for 24 hours and 3H-thymidine was added during the last 2 hours of the incubation. The attached cells were collected and the radioactivity was measured with liquid scintillation spectrometry. Osteoblasts were seeded on the bone graft materials for 60 or 120 minutes, 24 or 48 hours, and 3 or 7 days, then the co-culture was processed for scanning electron microscopy to observe the interaction of osteoblasts and the bio-derived bone materials. Results: Osteoblasts attached to the bio-derived bone materials in a time-dependent manner. There were significantly (P<0.05) more attached cells after 180 minutes than after 15 and 90 minutes of incubations (P<0.05). Osteoblasts were proliferated in a large amount on the surface and in the materials. Osteoblasts seeded onto 100 mg bio-derived bones resulted in significantly (P<0.05) more measurable proliferation than those seeded onto 10 mg bones. Osteoblasts appeared round as they attached to the materials, then flattened and spread over with time passing. Conclusions: Bio-derived bones can provide a good environment for the attachment and proliferation of osteoblasts.

  8. Thermogravimetric investigation on the degradation properties and combustion performance of bio-oils.

    Science.gov (United States)

    Ren, Xueyong; Meng, Jiajia; Moore, Andrew M; Chang, Jianmin; Gou, Jinsheng; Park, Sunkyu

    2014-01-01

    The degradation properties and combustion performance of raw bio-oil, aged bio-oil, and bio-oil from torrefied wood were investigated through thermogravimetric analysis. A three-stage process was observed for the degradation of bio-oils, including devolatilization of the aqueous fraction and light compounds, transition of the heavy faction to solid, and combustion of carbonaceous residues. Pyrolysis kinetics parameters were calculated via the reaction order model and 3D-diffusion model, and combustion indexes were used to qualitatively evaluate the thermal profiles of tested bio-oils for comparison with commercial oils such as fuel oils. It was found that aged bio-oil was more thermally instable and produced more combustion-detrimental carbonaceous solid. Raw bio-oil and bio-oil from torrefied wood had comparable combustion performance to fuel oils. It was considered that bio-oil has a potential to be mixed with or totally replace the fuel oils in boilers.

  9. [Effects of bio-fertilizer on organically cultured cucumber growth and soil biological characteristics].

    Science.gov (United States)

    Cao, Dan; Zong, Liang-gang; Xiao, Jun; Zhang, Qian; Zhao, Yan

    2010-10-01

    Field trials of organic farming were conducted to examine the effects of different bio-fertilizers on the organically cultured cucumber growth, soil enzyme activities, and soil microbial biomass. Four treatments were installed, i. e., organic fertilizer only (CK), bio-fertilizer "Zhonghe" combined with organic fertilizer (ZHH), bio-fertilizer "NST" combined with organic fertilizer (NST), and bio-fertilizer "Bio" combined with organic fertilizer (BIO). Bio-fertilizers combined with organic fertilizer increased the cucumber yield significantly, and improved the root growth and leaf chlorophyll content. Comparing with that in CK, the cucumber yield in treatments ZHH, NST, and BIO was increased by 10.4%, 12.4%, and 29.2%, respectively. At the seedling stage, early flowering stage, and picking time of cucumber, the soil microbial biomass C and N in treatments ZHH, NST, and BIO were significantly higher than that in CK, and the activities of soil urease, acid phosphatase, and catalase were also higher.

  10. BioEnergy Feasibility in South Africa

    Science.gov (United States)

    Hugo, Wim

    2015-04-01

    The BioEnergy Atlas for South Africa is the result of a project funded by the South African Department of Science and Technology, and executed by SAEON/ NRF with the assistance of a number of collaborators in academia, research institutions, and government. Now nearing completion, the Atlas provides an important input to policy and decision support in the country, significantly strengthens the availability of information resources on the topic, and provides a platform whereby current and future contributions on the subject can be managed, preserved, and disseminated. Bioenergy assessments have been characterized in the past by poor availability and quality of data, an over-emphasis on potentials and availability studies instead of feasibility assessment, and lack of comprehensive evaluation in competition with alternatives - both in respect of competing bioenergy resources and other renewable and non-renewable options. The BioEnergy Atlas in its current edition addresses some of these deficiencies, and identifies specific areas of interest where future research and effort can be directed. One can qualify the potentials and feasible options for BioEnergy exploitation in South Africa as follows: (1) Availability is not a fixed quantum. Availability of biomass and resulting energy products are sensitive to both the exclusionary measures one applies (food security, environmental, social and economic impacts) and the price at which final products will be competitive. (2) Availability is low. Even without allowing for feasibility and final product costs, the availability of biomass is low: biomass productivity in South Africa is not high by global standards due to rainfall constraints, and most arable land is used productively for food and agribusiness-related activities. This constrains the feasibility of purposely cultivated bioenergy crops. (3) Waste streams are important. There are significant waste streams from domestic solid waste and sewage, some agricultural

  11. Using Virtual Reference Transcripts for Staff Training.

    Science.gov (United States)

    Ward, David

    2003-01-01

    Describes a method of library staff training based on chat transcript analysis in which graduate student workers at a university reference desk examined transcripts of actual virtual reference desk transactions to analyze reference interviews. Discusses reference interview standards, reference desk behavior, and reference interview skills in…

  12. Sport and Exercise Biomechanics (Bios Instant Notes)

    OpenAIRE

    Paul Grimshaw; Adrian Lees; Neil Fowler; Adrian Burden

    2007-01-01

    DESCRIPTION Instant Notes on Sport and Exercise Biomechanics provides a broad overview of the fundamental concepts in exercise and sport biomechanics. PURPOSE The book aims to provide instant notes on essential information about biomechanics, and is designed to help undergraduate students to grasp the corresponding subjects in physical effort rapidly and easily. AUDIENCE The book provides a useful resource for undergraduate and graduate students as a fundamental reference book. For the resear...

  13. Cracking vegetable oil from Callophylluminnophyllum L. seeds to bio-gasoline by Ni-Mo/Al2O3 and Ni-Mo/Zeolite as micro-porous catalysts

    Science.gov (United States)

    Savitri, Effendi, R.; Tursiloadi, S.

    2016-02-01

    Natural minerals such as zeolite are local natural resources in the various regions in Indonesia. Studies on the application of natural mineral currently carried out by national research institutions, among others, as a filler, bleaching agent, or dehydration agent. However, not many studies that utilize these natural minerals as green catalysts material which has high performance for biomass conversion processes and ready to be applied directly by the bio-fuel industry. The trend movement of green and sustainable chemistry research that designing environmentally friendly chemical processes from renewable raw materials to produce innovative products derived biomass for bio-fuel. Callophylluminnophyllum L. seeds can be used as raw material for bio-energy because of its high oil content. Fatty acid and triglyceride compounds from this oil can be cracked into bio-gasoline, which does not contain oxygen in the hydrocarbon structure. Bio-gasoline commonly is referred to as drop-in biofuel because it can be directly used as a substitute fuel. This paper focused on the preparation and formulation of the catalyst NiMo/H-Zeolite and Ni-Mo/Al2O3 which were used in hydro-cracking process of oil from Callophylluminnophyllum L. seeds to produce bio-gasoline. The catalysts were analyzed using XRD, BET and IR-adsorbed pyridine method. The results of hydro-cracking products mostly were paraffin (C10-C19) straight chain, with 59.5 % peak area based on GC-MS analysis.

  14. Computational Metabolomics Operations at BioCyc.org

    Directory of Open Access Journals (Sweden)

    Peter D. Karp

    2015-05-01

    Full Text Available BioCyc.org is a genome and metabolic pathway web portal covering 5500 organisms, including Homo sapiens, Arabidopsis thaliana, Saccharomyces cerevisiae and Escherichia coli. These organism-specific databases have undergone variable degrees of curation. The EcoCyc (Escherichia coli Encyclopedia database is the most highly curated; its contents have been derived from 27,000 publications. The MetaCyc (Metabolic Encyclopedia database within BioCyc is a “universal” metabolic database that describes pathways, reactions, enzymes and metabolites from all domains of life. Metabolic pathways provide an organizing framework for analyzing metabolomics data, and the BioCyc website provides computational operations for metabolomics data that include metabolite search and translation of metabolite identifiers across multiple metabolite databases. The site allows researchers to store and manipulate metabolite lists using a facility called SmartTables, which supports metabolite enrichment analysis. That analysis operation identifies metabolite sets that are statistically over-represented for the substrates of specific metabolic pathways. BioCyc also enables visualization of metabolomics data on individual pathway diagrams and on the organism-specific metabolic map diagrams that are available for every BioCyc organism. Most of these operations are available both interactively and as programmatic web services.

  15. G-InforBIO: integrated system for microbial genomics

    Directory of Open Access Journals (Sweden)

    Abe Takashi

    2006-08-01

    Full Text Available Abstract Background Genome databases contain diverse kinds of information, including gene annotations and nucleotide and amino acid sequences. It is not easy to integrate such information for genomic study. There are few tools for integrated analyses of genomic data, therefore, we developed software that enables users to handle, manipulate, and analyze genome data with a variety of sequence analysis programs. Results The G-InforBIO system is a novel tool for genome data management and sequence analysis. The system can import genome data encoded as eXtensible Markup Language documents as formatted text documents, including annotations and sequences, from DNA Data Bank of Japan and GenBank encoded as flat files. The genome database is constructed automatically after importing, and the database can be exported as documents formatted with eXtensible Markup Language or tab-deliminated text. Users can retrieve data from the database by keyword searches, edit annotation data of genes, and process data with G-InforBIO. In addition, information in the G-InforBIO database can be analyzed seamlessly with nine different software programs, including programs for clustering and homology analyses. Conclusion The G-InforBIO system simplifies genome analyses by integrating several available software programs to allow efficient handling and manipulation of genome data. G-InforBIO is freely available from the download site.

  16. Ensino de Bioética: um desafio transdisciplinar

    Directory of Open Access Journals (Sweden)

    Eliane Elisa de Souza e Azevêdo

    1998-02-01

    Full Text Available O fato inovador de a Bioética ser uma área de conhecimento englobando várias disciplinas, e seu grande desenvolvimento em curto tempo, estão trazendo desafios de ordem acadêmica. O ensino da Bioética tornou-se uma nova experiência sem modelo didático definitivo. A forma tradicional de ensino baseada na concepção disciplinar não é eficaz para a completa compreensão desta nova área. A Bioética lida com saberes na encruzilhada de várias disciplinas, sugerindo uma concepção interdisciplinar ou mesmo transdisciplinar para seu ensino. A concepção filosófica da Bioética, conforme desenvolvida em países europeus, fortalece sua dimensão transdisciplinar e reconhece, na antropologia (cultural e filosófica, o suporte teórico para seu ensino. Assim, considerando a proximidade das culturas e valores morais das sociedades brasileira e européia, a concepção européia da Bioética parece mais apropriada para seu ensino neste país.

  17. Ensino de Bioética: um desafio transdisciplinar

    Directory of Open Access Journals (Sweden)

    Eliane Elisa de Souza e Azevêdo

    Full Text Available O fato inovador de a Bioética ser uma área de conhecimento englobando várias disciplinas, e seu grande desenvolvimento em curto tempo, estão trazendo desafios de ordem acadêmica. O ensino da Bioética tornou-se uma nova experiência sem modelo didático definitivo. A forma tradicional de ensino baseada na concepção disciplinar não é eficaz para a completa compreensão desta nova área. A Bioética lida com saberes na encruzilhada de várias disciplinas, sugerindo uma concepção interdisciplinar ou mesmo transdisciplinar para seu ensino. A concepção filosófica da Bioética, conforme desenvolvida em países europeus, fortalece sua dimensão transdisciplinar e reconhece, na antropologia (cultural e filosófica, o suporte teórico para seu ensino. Assim, considerando a proximidade das culturas e valores morais das sociedades brasileira e européia, a concepção européia da Bioética parece mais apropriada para seu ensino neste país.

  18. Bio-composites : opportunities for value-added biobased materials

    Energy Technology Data Exchange (ETDEWEB)

    Drzal, L.T. [Michigan State Univ., East Lansing, MI (United States). Dept. of Chemical Engineering and Materials Science]|[Michigan State Univ., East Lansing, MI (United States). Composite Materials and Structures Center

    2003-07-01

    In order to reduce dependency on foreign oil, there is a growing need to develop and commercialize new bio-based green materials and technologies that can produce bio-based structural materials that are competitive with current synthetic products. The use of bio-based products would also improve the environment and create new opportunities for the agricultural economy. This paper described ongoing research into bio-based materials and products that replace petroleum-based products. In particular, it examined the use of biocomposites made by embedding natural/biofibers such as kenaf, hemp, flax, jute, henequen, pineapple leaf fiber, corn stalk fibers and native Michigan grasses into petroleum-derived traditional plastics such as polypropylene, unsaturated polyesters and epoxies. It also examines the use of green biocomposites developed by embedding these bio-fibers into renewable resource-based bioplastics such as cellulosic plastics and soy-based plastics. New processing methods that combine biofibers with plastics were needed to produce the biocomposites with desirable mechanical properties. The study showed that biofiber reinforced petroleum-based plastic biocomposites can produce a structural material that offers a balance between ecology, economy and technology. The potential for using these materials for automotive and building materials was also presented. 1 tab., 28 figs.

  19. Modeling biological systems with delays in Bio-PEPA

    CERN Document Server

    Caravagna, Giulio; 10.4204/EPTCS.40.7

    2010-01-01

    Delays in biological systems may be used to model events for which the underlying dynamics cannot be precisely observed, or to provide abstraction of some behavior of the system resulting more compact models. In this paper we enrich the stochastic process algebra Bio-PEPA, with the possibility of assigning delays to actions, yielding a new non-Markovian process algebra: Bio-PEPAd. This is a conservative extension meaning that the original syntax of Bio-PEPA is retained and the delay specification which can now be associated with actions may be added to existing Bio-PEPA models. The semantics of the firing of the actions with delays is the delay-as-duration approach, earlier presented in papers on the stochastic simulation of biological systems with delays. These semantics of the algebra are given in the Starting-Terminating style, meaning that the state and the completion of an action are observed as two separate events, as required by delays. Furthermore we outline how to perform stochastic simulation of Bio...

  20. Gradient packing bed bio-filter for landfill methane mitigation.

    Science.gov (United States)

    Obulisamy, Parthiba Karthikeyan; Sim Yan May, Jane; Rajasekar, Balasubramanian

    2016-10-01

    We assessed the suitability of various biogenic materials for development of a gradient packed bed bio-filter to mitigate the methane (CH4) emission from landfills. Five different biogenic materials (windrow compost-WC; vermicompost-VC; landfill top cover-LTC; landfill bottom soil-LBS; and river soil sediment-SS) were screened. Among these materials, the VC showed a better CH4 oxidation potential (MOP) of 12.6μg CH4 gdw(-1)h(-1). Subsequently, the VC was used as a packing material along with wood chips in proto-type bio-filters. Wood chips were mixed at 5-15% to form three distinct gradients in a test bio-filter. Under the three different CH4 loading rates of 33, 44 and 55 gCH4 m(-3)h(-1), the achieved MOPs were 31, 41, and 47gCH4 m(-3)h(-1), respectively. The gradient packed bed bio-filter is effective for landfill CH4 mitigation than the conventional bio-filter as the latter shows gas channeling effects with poor MOPs.

  1. Towards a Bio-inspired Security Framework for Mission-Critical Wireless Sensor Networks

    Science.gov (United States)

    Ren, Wei; Song, Jun; Ma, Zhao; Huang, Shiyong

    Mission-critical wireless sensor networks (WSNs) have been found in numerous promising applications in civil and military fields. However, the functionality of WSNs extensively relies on its security capability for detecting and defending sophisticated adversaries, such as Sybil, worm hole and mobile adversaries. In this paper, we propose a bio-inspired security framework to provide intelligence-enabled security mechanisms. This scheme is composed of a middleware, multiple agents and mobile agents. The agents monitor the network packets, host activities, make decisions and launch corresponding responses. Middleware performs an infrastructure for the communication between various agents and corresponding mobility. Certain cognitive models and intelligent algorithms such as Layered Reference Model of Brain and Self-Organizing Neural Network with Competitive Learning are explored in the context of sensor networks that have resource constraints. The security framework and implementation are also described in details.

  2. Using cloud computing infrastructure with CloudBioLinux, CloudMan, and Galaxy.

    Science.gov (United States)

    Afgan, Enis; Chapman, Brad; Jadan, Margita; Franke, Vedran; Taylor, James

    2012-06-01

    Cloud computing has revolutionized availability and access to computing and storage resources, making it possible to provision a large computational infrastructure with only a few clicks in a Web browser. However, those resources are typically provided in the form of low-level infrastructure components that need to be procured and configured before use. In this unit, we demonstrate how to utilize cloud computing resources to perform open-ended bioinformatic analyses, with fully automated management of the underlying cloud infrastructure. By combining three projects, CloudBioLinux, CloudMan, and Galaxy, into a cohesive unit, we have enabled researchers to gain access to more than 100 preconfigured bioinformatics tools and gigabytes of reference genomes on top of the flexible cloud computing infrastructure. The protocol demonstrates how to set up the available infrastructure and how to use the tools via a graphical desktop interface, a parallel command-line interface, and the Web-based Galaxy interface.

  3. Multi input single output model predictive control of non-linear bio-polymerization process

    Energy Technology Data Exchange (ETDEWEB)

    Arumugasamy, Senthil Kumar; Ahmad, Z. [School of Chemical Engineering, Univerisiti Sains Malaysia, Engineering Campus, Seri Ampangan,14300 Nibong Tebal, Seberang Perai Selatan, Pulau Pinang (Malaysia)

    2015-05-15

    This paper focuses on Multi Input Single Output (MISO) Model Predictive Control of bio-polymerization process in which mechanistic model is developed and linked with the feedforward neural network model to obtain a hybrid model (Mechanistic-FANN) of lipase-catalyzed ring-opening polymerization of ε-caprolactone (ε-CL) for Poly (ε-caprolactone) production. In this research, state space model was used, in which the input to the model were the reactor temperatures and reactor impeller speeds and the output were the molecular weight of polymer (M{sub n}) and polymer polydispersity index. State space model for MISO created using System identification tool box of Matlab™. This state space model is used in MISO MPC. Model predictive control (MPC) has been applied to predict the molecular weight of the biopolymer and consequently control the molecular weight of biopolymer. The result shows that MPC is able to track reference trajectory and give optimum movement of manipulated variable.

  4. Book Titled Autonomic Networking-on-Chip: Bio-Inspired Specification, Development, and Verification: An Introduction

    Directory of Open Access Journals (Sweden)

    Phan Cong Vinh

    2015-03-01

    Full Text Available Despite the growing mainstream importance and unique advantages of autonomic networking-onchip (ANoC technology, Autonomic Networking-On-Chip: Bio-Inspired Specification, Development, and Verification is among the first books to evaluate research results on formalizing this emerging NoC paradigm, which was inspired by the human nervous system. The third book in the Embedded Multi-Core Systems series from CRC Press, this is an advanced technical guide and reference composed of contributions from prominent researchers in industry and academia around the world. A response to the critical need for a global information exchange and dialogue, it is written for engineers, scientists, practitioners, and other researchers who have a basic understanding of NoC and are now ready to learn how to specify, develop, and verify ANoC using rigorous approaches.

  5. Reference Anytime Anywhere: Towards Virtual Reference Services at Penn State.

    Science.gov (United States)

    Moyo, Lesley M.

    2002-01-01

    Outlines the service rationale, software and technology considerations taken by the Pennsylvania State University library in planning towards online, real-time reference services and provides an overview of the planned pilot project. Discusses recent trends in academic electronic libraries, including providing value-added services to support…

  6. Virtual Reference, Real Money: Modeling Costs in Virtual Reference Services

    Science.gov (United States)

    Eakin, Lori; Pomerantz, Jeffrey

    2009-01-01

    Libraries nationwide are in yet another phase of belt tightening. Without an understanding of the economic factors that influence library operations, however, controlling costs and performing cost-benefit analyses on services is difficult. This paper describes a project to develop a cost model for collaborative virtual reference services. This…

  7. Reference Anywhere, Anytime: Recent Works on Virtual Reference

    Science.gov (United States)

    Lindsay, Elizabeth Blakesley

    2008-01-01

    The topic of virtual reference has been a popular one in the past year, and this column highlights a range of those articles. Included are overviews of the topic, articles addressing specific technological solutions and concerns, and pieces that explore the intricacies of delivering and assessing a "traditional" service through a…

  8. Acute - Glossary Entry - Genetics Home Reference [Genetics Home Reference (Glossary)

    Lifescience Database Archive (English)

    Full Text Available | F | G | H | I | J | K | L | M | N | O | P | Q-R | S | T | U | V | W | X | Y-Z Acute Definition(s) Having ...ding Medical Terminology . Published : October 27, 2014 Acute - Glossary Entry - Genetics Home Reference ...

  9. Swahili Learners' Reference Grammar. African Language Learners' Reference Grammar Series.

    Science.gov (United States)

    Thompson, Katrina Daly; Schleicher, Antonia Folarin

    This reference grammar is written for speakers of English who are learning Swahili. Because many language learners are not familiar with the grammatical terminology, this book explains the basic terminology and concepts of English grammar that are necessary for understanding the grammar of Swahili. It assumes no formal knowledge of English grammar…

  10. Reference Models for Virtual Enterprises

    DEFF Research Database (Denmark)

    Tølle, Martin; Bernus, Peter; Vesterager, Johan

    2002-01-01

    This paper analyses different types of Reference Models (RMs) applicable to support the set up and (re)configuration of virtual enterprises (VEs). RMs are models capturing concepts common to VEs aiming to convert the task of setting up of VE towards a configuration task, and hence reduce the time...... needed for VE creation. The RMs are analysed through a mapping onto the Virtual Enterprise Reference Architecture (VERA) created in the IMS GLOBEMEN project based upon GERAM.......This paper analyses different types of Reference Models (RMs) applicable to support the set up and (re)configuration of virtual enterprises (VEs). RMs are models capturing concepts common to VEs aiming to convert the task of setting up of VE towards a configuration task, and hence reduce the time...

  11. Fast Reference-Based MRI

    CERN Document Server

    Weizman, Lior; Ben-Basaht, Dafna

    2015-01-01

    In many clinical MRI scenarios, existing imaging information can be used to significantly shorten acquisition time or to improve Signal to Noise Ratio (SNR). In some cases, a previously acquired image can serve as a reference image, that may exhibit similarity to the image being acquired. Examples include similarity between adjacent slices in high resolution MRI, similarity between various contrasts in the same scan and similarity between different scans of the same patient. In this paper we present a general framework for utilizing reference images for fast MRI. We take into account that the reference image may exhibit low similarity with the acquired image and develop an iterative weighted approach for reconstruction, which tunes the weights according to the degree of similarity. Experiments demonstrate the performance of the method in three different clinical MRI scenarios: SNR improvement in high resolution brain MRI, utilizing similarity between T2-weighted and fluid-attenuated inversion recovery (FLAIR)...

  12. Haemostatic reference intervals in pregnancy

    DEFF Research Database (Denmark)

    Szecsi, Pal Bela; Jørgensen, Maja; Klajnbard, Anna;

    2010-01-01

    Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age......-specific reference intervals for coagulation tests during normal pregnancy. Eight hundred one women with expected normal pregnancies were included in the study. Of these women, 391 had no complications during pregnancy, vaginal delivery, or postpartum period. Plasma samples were obtained at gestational weeks 13......-20, 21-28, 29-34, 35-42, at active labor, and on postpartum days 1 and 2. Reference intervals for each gestational period using only the uncomplicated pregnancies were calculated in all 391 women for activated partial thromboplastin time (aPTT), fibrinogen, fibrin D-dimer, antithrombin, free protein S...

  13. JavaScript programmer's reference

    CERN Document Server

    Valentine, Thomas

    2013-01-01

    JavaScript Programmer's Reference is an invaluable resource that won't stray far from your desktop (or your tablet!). It contains detailed information on every JavaScript object and command, and combines that reference with practical examples showcasing how you can use those commands in the real world. Whether you're just checking the syntax of a method or you're starting out on the road to JavaScript mastery, the JavaScript Programmer's Reference will be an essential aid.  With a detailed and informative tutorial section giving you the ins and outs of programming with JavaScript and the DOM f

  14. DETERMINATION OF ACUTE TOXICITY OF BIO HUMATES

    Directory of Open Access Journals (Sweden)

    Zholobova I. S.

    2016-05-01

    Full Text Available In the work, we present the results of the investigation of acute toxicity of bio humates obtained by the method vermicultivation on laboratory animals. In the diets of farm animals and Pets to fill in the missing nutrients in the past years, we had an extensive use of various feed additives. Among them, mineral (macro - and micronutrients, protein and fat supplements, vitamins, biostimulants, complex natural compounds (sapropel, peat, synthetic products (enzymes, hormones, antibiotics, adaptogens, antioxidants. The search for new ways of improvement and increase of efficiency of agricultural animals using feed additives with high demands on ecology of meat and dairy foods naturally led to increased studies on the use in livestock farming of water-soluble alkaline salts of natural humic acids - humates. Their environmental safety and the unique ability to improve metabolism and increase energy cells very positively manifested in living organisms. Numerous studies Russian and foreign scientists installed a high efficiency natural humates as biostimulators and immunomodulators in animal husbandry and veterinary medicine. Accumulated extensive experimental material, proving that the use of humates leads to faster growth of animals, reducing morbidity and mortality, increase the body's resistance to toxins in feed and resistance to adverse environmental conditions. Improving with the help of humates ecological purity of the ecosystems "water — soil — plant", as well as the health of birds, animals and fish will ultimately lead to strengthen health and to prolong human life as a consumer of agricultural products. Currently, the livestock market is intensively increasing the humates produced in Russia and abroad from brown coal, peat, sapropel. A special place among them has been occupied by the newest formulations because of a unique combination of safety, efficiency, and value, which, thanks to its amazing properties to increase energy cells

  15. Restoration of badlands through applying bio-engineering techniques in active gully systems: Evidence from the Ecuadorian Andes

    Science.gov (United States)

    Borja, P.; Vanacker, V.; Alvarado, D.; Govers, G.

    2012-04-01

    A better insight in the processes controlling sediment generation, transport and deposition in badlands is necessary to enhance restoration of degraded soils through eco-engineering techniques. In this study, we evaluate the effect of different bio-engineering measures on soil and slope stability. Five micro-catchments (of 0.2 to 5 ha) were selected within a 3 km2 area in the lower part of the Loreto catchment (Southern Ecuadorian Andes). The micro-catchments differ only by land cover and degree of implementation of soil and water conservation measures. Bio-engineering techniques were used to construct dikes made of fascines of wooden sticks and earth-filled tires in active gully beds, where they are most efficient to reduce water and sediment transport. The experimental design consists of three micro-catchments within highly degraded lands: (DI) micro-catchment with bio-engineering measures concentrated in the active gully beds, (DF) with reforestation of Eucalyptus trees, and (DT) reference situation without any conservation measures. Two micro-catchments were monitored in agricultural lands with (AI) and without (AT) bio-engineering measures in the active gully beds. All catchments were equipped with San Dimas flumes to measure water flow, and sediment traps to monitor sediment export. In the (active) gully beds, various parameters related to gully stability (soil water content, bed elevation, vegetation cover, sedimentation/erosion) were monitored at weekly intervals. First results show that bio-engineering techniques are efficient to stabilize active gully beds through a reduction of the rapid concentration of excess rainfall and the sediment production and transfer. Fascines made of wooden sticks are far more efficient than earth-filled tires. Sediment deposition behind dikes is strongly dependent on precedent rainfall events, and the slope and vegetation cover of the gully floor. The sediment deposited facilitates colonization of the gully floor by native

  16. FoodBioTimerAssay: a new microbiological biosensor for detection of Escherichia coli food contamination

    Directory of Open Access Journals (Sweden)

    Francesca Berlutti

    2008-09-01

    Full Text Available

    Background: Prevention of foodborne diseases is a fundamental goal for public health and industries engaged in food preparation and distribution. The correct procedure to ensure an effective prevention of foodborne diseases consists essentially in microbiological monitoring and enumeration of indicator microorganisms of faecal contamination at critical control points along the food producing procedures. Here, we propose a new microbiological biosensor, called FoodBioTimerAssay (FBTA, for rapid and reliable detection of Escherichia coli as indicator of faecal contamination in food and surface samples.

    Methods: A total of 122 samples were analysed using both experimental FBTA and Reference method. FBTA employs FBTM medium and counts bacteria through microbial metabolism measure: the time required for colour switch (red-to-yellow of FBTM, due to E. coli metabolism, is correlated to initial bacterial concentration.

    Results: FBTA results showed an overall agreement percentage with Reference method equal to 97.54%. Discrepancies concerned three samples (1 food and 2 surface samples. Moreover, the time required to perform FBTA method was 3-fold shorter than Reference one.

    Conclusions: FBTA method may be considered a useful tool for detection of E. coli contamination in food and surface samples. Therefore, FBTA method may be successfully employed in risk analysis of foodborne diseases.

  17. Electrical engineering a pocket reference

    CERN Document Server

    Schmidt-Walter, Heinz

    2007-01-01

    This essential reference offers you a well-organized resource for accessing the basic electrical engineering knowledge you need for your work. Whether you're an experienced engineer who appreciates an occasional refresher in key areas, or a student preparing to enter the field, Electrical Engineering: A Pocket Reference provides quick and easy access to fundamental principles and their applications. You also find an extensive collection of time-saving equations that help simplify your daily projects.Supported with more than 500 diagrams and figures, 60 tables, and an extensive index, this uniq

  18. Application of Bio-speckle Activity to Assess Seed Viability

    Directory of Open Access Journals (Sweden)

    Sen Men

    2015-05-01

    Full Text Available This study presents an assessment method for seed viability, using bio-speckle technique. Bio-speckle is caused by moving of the biological material under highly coherent light. If this phenomenon can be measured by successive speckle patterns during the period of germination, it is possible to identify different activities of the seeds. Viable and non-viable pisumsativum seeds were illuminated by a helium-neon laser source of 7mW with wavelength of 632.8 nm. The speckle patterns were recorded by a digital colour charge-couple device camera and stored in the host computer for further analysis using Matlab. Two methods were used to obtain information of biological activities from these speckle patterns. It was observed that the seeds activities can be distinguished as viable seeds and non-viable seeds. The results indicate that bio-speckle can be used to assess seed viability.

  19. [(Bio)artificial liver support: ready for the patient?].

    Science.gov (United States)

    Chamuleau, R A F M

    2016-05-01

    In 2016, an intensive-care physician has at his disposal a number of artificial organs for the support of patients with organ failure. Examples are the artificial kidney and the heart-lung machine. Artificial livers are being developed for patients with severe liver failure whose lives can only be saved at the present time by a transplant with a donor liver. These artificial livers are based either on a device that removes toxic materials from the patient's blood with, for example, albumin dialysis, or make use of bio-reactors filled with functioning liver cells, the so-called bio-artificial liver. In theory, the bio-artificial liver has the greatest potential to increase life expectancy. The results of clinical studies are also very promising. They are not yet sufficient, however, to permit general clinical use.

  20. Bio-inspired nanotechnology from surface analysis to applications

    CERN Document Server

    Walsh, Tiffany

    2014-01-01

    This book focuses on the use of bio-inspired and biomimetic methods for the fabrication and activation of nanomaterials. This includes studies concerning the binding of the biomolecules to the surface of inorganic structures, structure/function relationships of the final materials, and extensive discussions on the final applications of such biomimetic materials in unique applications including energy harvesting/storage, biomedical diagnostics, and materials assembly. This book also: ·          Covers the sustainable features of bio-inspired nanotechnology ·          Includes studies on the unique applications of biomimetic materials, such as energy harvesting and biomedical diagnostics Bio-Inspired Nanotechnology: From Surface Analysis to Applications is an ideal book for researchers, students, nanomaterials engineers, bioengineers, chemists, biologists, physicists, and medical researchers.

  1. Bio-electrosprayed living composite matrix implanted into mouse models.

    Science.gov (United States)

    Jayasinghe, Suwan N; Warnes, Gary; Scotton, Chris J

    2011-10-10

    We show that composite de novo structures can be generated using bio-electrosprays. Mouse lung fibroblasts are bio-electrosprayed directly with a biopolymer to form cell-bearing matrices, which are viable even when implanted subcutaneously into murine hosts. Generated cell-bearing matrices are assessed in-vitro and found to undergo all expected cellular behaviour. Subsequent in-vivo studies demonstrate the implanted living matrices integrating as expected with the surrounding microenvironment. The in-vitro and in-vivo studies elucidate and validate the ability for either bio-electrosprays or cell electrospinning to form a desired living architecture for undergoing investigation for repairing, replacing and rejuvenating damaged and/or ageing tissues.

  2. BioFET-SIM Web Interface: Implementation and Two Applications

    CERN Document Server

    Hediger, Martin R; De Vico, Luca

    2012-01-01

    We present a web interface for the BioFET-SIM program. The web interface allows to conveniently setup calculations based on the BioFET-SIM multiple charges model. As an illustration, two case studies are presented. In the first case, a generic peptide with opposite charges on both ends is inverted in orientation on a semiconducting nanowire surface leading to a corresponding change in sign of the computed sensitivity of the device. In the second case, the binding of an antibody/antigen complex on the nanowire surface is studied in terms of orientation and analyte/nanowire surface distance. We demonstrate how the BioFET-SIM web interface can aid in the understanding of experimental data and postulate alternative ways of antibody/antigen orientation on the nanowire surface.

  3. Catalytic Hydrogenation of Bio-Oil for Chemicals and Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Douglas C.

    2006-02-14

    The scope of work includes optimizing processing conditions and demonstrating catalyst lifetime for catalyst formulations that are readily scaleable to commercial operations. We use a bench-scale, continuous-flow, packed-bed, catalytic, tubular reactor, which can be operated in the range of 100-400 mL/hr., from 50-400 C and up to 20MPa (see Figure 1). With this unit we produce upgraded bio-oil from whole bio-oil or useful bio-oil fractions, specifically pyrolytic lignin. The product oils are fractionated, for example by distillation, for recovery of chemical product streams. Other products from our tests have been used in further testing in petroleum refining technology at UOP and fractionation for product recovery in our own lab. Further scale-up of the technology is envisioned and we will carry out or support process design efforts with industrial partners, such as UOP.

  4. Opto-bio-fluidic modeling of bioanalytical and biomedical microdevices

    Science.gov (United States)

    Przekwas, Andrzej J.; Sikorski, Zbigniew

    2006-08-01

    Optical technology is rapidly finding novel applications in several exiting bioanalytical, biological, and biomedical applications. Optical beams are increasingly used for bio-fluidic sample manipulation in BioMEMS devices replacing convectional mechanical, electrostatic, and electrokinetic methods. This paper presents novel multiphysics computational approach for modeling optical interaction with fluidic, thermal, mechanical, and biological processes. We present a model of optical manipulation of particles and biological cells with laser beams. Computational results are compared to available experimental data from laboratory experiments and from practical engineered optical bio microdevices. The modeling approach is demonstrated on selected specific applications of optical manipulation of micro spheres, micro cylinders, and optical manipulation and sorting of biological cells in microfluidic cytometers.

  5. Mechanical Characterization of Bio-Char Made Hybrid Composite

    Directory of Open Access Journals (Sweden)

    Amit pandey

    2016-08-01

    Full Text Available Material discoveries and development have always been the cause of the growth and development of a nation and the need of naturally made materials is the need of hours. Thus this paper takes you to the development of a hybrid composite made of sisal fiber with epoxy as the matrix intertwined with softwood bio-char. Softwood chip bio-char, produced by slow pyrolysis, has a porous structure improving its nutrient absorbing capacity, surface area and thus a potential substituent. Bio-char has an appreciable carbon sequestration value i.e. a carbon absorbing product. The orientation of sisal fiber are changed and studied in longitudinal and orthogonal direction indicating superiority of longitudinal fiber orientation .It also addresses the variation in mechanical characteristic (tensile flexural and impact with different constituent of the new composite and its position in material selection charts with a direction for further work.

  6. BioMOBY: an open source biological web services proposal.

    Science.gov (United States)

    Wilkinson, Mark D; Links, Matthew

    2002-12-01

    BioMOBY is an Open Source research project which aims to generate an architecture for the discovery and distribution of biological data through web services; data and services are decentralised, but the availability of these resources, and the instructions for interacting with them, are registered in a central location called MOBY Central. BioMOBY adds to the web services paradigm, as exemplified by Universal Data Discovery and Integration (UDDI), by having an object-driven registry query system with object and service ontologies. This allows users to traverse expansive and disparate data sets where each possible next step is presented based on the data object currently in-hand. Moreover, a path from the current data object to a desired final data object could be automatically discovered using the registry. Native BioMOBY objects are lightweight XML, and make up both the query and the response of a simple object access protocol (SOAP) transaction.

  7. Bioprocessing of bio-based chemicals produced from lignocellulosic feedstocks.

    Science.gov (United States)

    Kawaguchi, Hideo; Hasunuma, Tomohisa; Ogino, Chiaki; Kondo, Akihiko

    2016-12-01

    The feedstocks used for the production of bio-based chemicals have recently expanded from edible sugars to inedible and more recalcitrant forms of lignocellulosic biomass. To produce bio-based chemicals from renewable polysaccharides, several bioprocessing approaches have been developed and include separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and consolidated bioprocessing (CBP). In the last decade, SHF, SSF, and CBP have been used to generate macromolecules and aliphatic and aromatic compounds that are capable of serving as sustainable, drop-in substitutes for petroleum-based chemicals. The present review focuses on recent progress in the bioprocessing of microbially produced chemicals from renewable feedstocks, including starch and lignocellulosic biomass. In particular, the technological feasibility of bio-based chemical production is discussed in terms of the feedstocks and different bioprocessing approaches, including the consolidation of enzyme production, enzymatic hydrolysis of biomass, and fermentation.

  8. Combustion Characterization of Individual Bio-oil Droplets

    DEFF Research Database (Denmark)

    Hansen, Brian Brun; Jensen, Peter Arendt

    2015-01-01

    was tested in a single particle reactor at conditions relevant for suspension firing (A: 1200 °C, 5.5 % O2; B: 1200 °C, 2.9 % O2 and C: 990 °C, 5.5 % O2). The slurries were tested to optimize the bio-oil composition for use as an alternative power plant start-up fuel. Pyrolysis times for 5 mg bio-oil samples...... and thereby decreased flame stability. Most promising were oil or diesel (not palm oil) containing slurries (1 and 5) with heating values in the range of 15 MJ/kg.......Single droplet combustion characteristics has been investigated for bio-oil slurries, containing biomass residue, and compared to conventional fuels for pulverized burners, such as fuel oil (start up) and wood chips (solid biomass fuel). The investigated fuels ignition delays and pyrolysis behavior...

  9. Bio-oil and bio-char from low temperature pyrolysis of spent grains using activated alumina.

    Science.gov (United States)

    Sanna, Aimaro; Li, Sujing; Linforth, Rob; Smart, Katherine A; Andrésen, John M

    2011-11-01

    The pyrolysis of wheat and barley spent grains resulting from bio-ethanol and beer production respectively was investigated at temperatures between 460 and 540 °C using an activated alumina bed. The results showed that the bio-oil yield and quality depend principally on the applied temperature where pyrolysis at 460 °C leaves a bio-oil with lower nitrogen content in comparison with the original spent grains and low oxygen content. The viscosity profile of the spent grains indicated that activated alumina could promote liquefaction and prevent charring of the structure between 400 and 460 °C. The biochar contains about 10-12% of original carbon and 13-20% of starting nitrogen resulting very attractive as a soil amendment and for carbon sequestration. Overall, value can be added to the spent grains opening a new market in bio-fuel production without the needs of external energy. The bio-oil from spent grains could meet about 9% of the renewable obligation in the UK.

  10. BioWord: A sequence manipulation suite for Microsoft Word

    Directory of Open Access Journals (Sweden)

    Anzaldi Laura J

    2012-06-01

    Full Text Available Abstract Background The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. Results BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. Conclusions BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms.

  11. The water footprint of sweeteners and bio-ethanol.

    Science.gov (United States)

    Gerbens-Leenes, Winnie; Hoekstra, Arjen Y

    2012-04-01

    An increasing demand for food together with a growing demand for energy crops result in an increasing demand for and competition over water. Sugar cane, sugar beet and maize are not only essential food crops, but also important feedstock for bio-ethanol. Crop growth requires water, a scarce resource. This study aims to assess the green, blue and grey water footprint (WF) of sweeteners and bio-ethanol from sugar cane, sugar beet and maize in the main producing countries. The WFs of sweeteners and bio-ethanol are mainly determined by the crop type that is used as a source and by agricultural practise and agro-climatic conditions; process water footprints are relatively small. The weighted global average WF of sugar cane is 209 m(3)/tonne; for sugar beet this is 133 m(3)/tonne and for maize 1222 m(3)/tonne. Large regional differences in WFs indicate that WFs of crops for sweeteners and bio-ethanol can be improved. It is more favourable to use maize as a feedstock for sweeteners or bio-ethanol than sugar beet or sugar cane. The WF of sugar cane contributes to water stress in the Indus and Ganges basins. In the Ukraine, the large grey WF of sugar beet contributes to water pollution. In some western European countries, blue WFs of sugar beet and maize need a large amount of available blue water for agriculture. The allocation of the limited global water resources to bio-energy on a large scale will be at the cost of water allocation to food and nature.

  12. BioWarehouse: a bioinformatics database warehouse toolkit

    Directory of Open Access Journals (Sweden)

    Stringer-Calvert David WJ

    2006-03-01

    Full Text Available Abstract Background This article addresses the problem of interoperation of heterogeneous bioinformatics databases. Results We introduce BioWarehouse, an open source toolkit for constructing bioinformatics database warehouses using the MySQL and Oracle relational database managers. BioWarehouse integrates its component databases into a common representational framework within a single database management system, thus enabling multi-database queries using the Structured Query Language (SQL but also facilitating a variety of database integration tasks such as comparative analysis and data mining. BioWarehouse currently supports the integration of a pathway-centric set of databases including ENZYME, KEGG, and BioCyc, and in addition the UniProt, GenBank, NCBI Taxonomy, and CMR databases, and the Gene Ontology. Loader tools, written in the C and JAVA languages, parse and load these databases into a relational database schema. The loaders also apply a degree of semantic normalization to their respective source data, decreasing semantic heterogeneity. The schema supports the following bioinformatics datatypes: chemical compounds, biochemical reactions, metabolic pathways, proteins, genes, nucleic acid sequences, features on protein and nucleic-acid sequences, organisms, organism taxonomies, and controlled vocabularies. As an application example, we applied BioWarehouse to determine the fraction of biochemically characterized enzyme activities for which no sequences exist in the public sequence databases. The answer is that no sequence exists for 36% of enzyme activities for which EC numbers have been assigned. These gaps in sequence data significantly limit the accuracy of genome annotation and metabolic pathway prediction, and are a barrier for metabolic engineering. Complex queries of this type provide examples of the value of the data warehousing approach to bioinformatics research. Conclusion BioWarehouse embodies significant progress on the

  13. Characterization of Deactivated Bio-oil Hydrotreating Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Huamin; Wang, Yong

    2015-10-06

    Deactivation of bio-oil hydrotreating catalysts remains a significant challenge because of the poor quality of pyrolysis bio-oil input for hydrotreating and understanding their deactivation mode is critical to developing improved catalysts and processes. In this research, we developed an understanding of the deactivation of two-step bio-oil hydrotreating catalysts (sulfided Ru/C and sulfided CoMo/C) through detailed characterization of the catalysts using various complimentary analytical techniques. Severe fouling of both catalysts by carbonaceous species was the major form of deactivation, which is consistent with the significant loss of surface area and pore volume of both deactivated catalysts and the significant increase of the bulk density. Further analysis of the carbonaceous species by thermogravimetric analysis and x-ray photoelectron spectroscopy indicated that the carbonaceous species was formed by condensation reaction of active species such as sugars and sugar derivatives (aldehydes and ketones) in bio-oil feedstock during bio-oil hydrotreating under the conditions and catalysts used. Microscopy results did not show metal sintering of the Ru/C catalyst. However, X-ray diffraction indicated a probable transformation of the highly-active CoMoS phase in the sulfided CoMo/C catalyst to Co8S9 and MoS2 phase with low activity. Loss of the active site by transport of inorganic elements from the bio-oil and the reactor construction material onto the catalyst surface also might be a cause of deactivation as indicated by elemental analysis of spent catalysts.

  14. Large-scale biohydrogen production from bio-oil.

    Science.gov (United States)

    Sarkar, Susanjib; Kumar, Amit

    2010-10-01

    Large amount of hydrogen is consumed during the upgrading of bitumen into synthetic crude oil (SCO), and this hydrogen is exclusively produced from natural gas in Western Canada. Because of large amount of emission from natural gas, alternative sources for hydrogen fuel especially renewable feedstocks could significantly reduce CO(2) emissions. In this study, biomass is converted to bio-oil by fast pyrolysis. This bio-oil is steam reformed near bitumen upgrading plant for producing hydrogen fuel. A techno-economic model is developed to estimate the cost of hydrogen from biomass through the pathway of fast pyrolysis. Three different feedstocks including whole-tree biomass, forest residues (i.e. limbs, branches, and tops of tree produced during logging operations), and straw (mostly from wheat and barley crops) are considered for biohydrogen production. Delivered cost of biohydrogen from whole-tree-based biomass ($2.40/kg of H(2)) is lower than that of forest residues ($3.00/kg of H(2)) and agricultural residues ($4.55/kg of H(2)) at a plant capacity of 2000 dry tonnes/day. In this study, bio-oil is produced in the field/forest and transported to a distance of 500 km from the centralized remote bio-oil production plant to bitumen upgrading plant. Feedstock delivery cost and capital cost are the largest cost contributors to the bio-oil production cost, while more than 50% of the cost of biohydrogen production is contributed by bio-oil production and transportation. Carbon credits of $133, $214, and $356/tonne of CO(2) equivalent could make whole-tree, forest residues, and straw-based biohydrogen production competitive with natural gas-based H(2) for a natural gas price of $5/GJ, respectively.

  15. MD-CTS: An integrated terminology reference of clinical and translational medicine.

    Science.gov (United States)

    Ray, Will; Finamore, Joe; Rastegar-Mojarad, Majid; Kadolph, Chris; Ye, Zhan; Bohne, Jacquie; Xu, Yin; Burish, Dan; Sondelski, Joshua; Easker, Melissa; Finnegan, Brian; Bartkowiak, Barbara; Smith, Catherine Arnott; Tachinardi, Umberto; Mendonca, Eneida A; Weichelt, Bryan; Lin, Simon M

    2016-01-01

    New vocabularies are rapidly evolving in the literature relative to the practice of clinical medicine and translational research. To provide integrated access to new terms, we developed a mobile and desktop online reference-Marshfield Dictionary of Clinical and Translational Science (MD-CTS). It is the first public resource that comprehensively integrates Wiktionary (word definition), BioPortal (ontology), Wiki (image reference), and Medline abstract (word usage) information. MD-CTS is accessible at http://spellchecker.mfldclin.edu/. The website provides a broadened capacity for the wider clinical and translational science community to keep pace with newly emerging scientific vocabulary. An initial evaluation using 63 randomly selected biomedical words suggests that online references generally provided better coverage (73%-95%) than paper-based dictionaries (57-71%).

  16. The Rosia Language Reference Manual

    Science.gov (United States)

    1981-12-01

    Alternate database 16 Anaphora 26, 30, 56 Anaphoric reference 30 Arithmetic expressions 33 Arithmetic operators 8 Bind 54 Binding 54, 57 BNF 94...Descriptions as Class Membership Tests .......... 28 4.2.7. Descriptions and Modification ................... 29 4.2.8. Anaphoric Descriptions...54 4.9.3. Variable Binding ................................ 54 4.9.4. Pattern Matching ................................ 55 5

  17. Tractor Transmissions. A Teaching Reference.

    Science.gov (United States)

    American Association for Agricultural Engineering and Vocational Agriculture, Athens, GA.

    The manual was developed as a reference for teaching students about transmissions in farm tractors. The manual is divided into five sections: (1) transmission history, (2) gears and bearings in transmission, (3) sliding-gear transmissions, (4) planetary gearing, and (5) glossary. The working principles of the sliding-gear transmission, the most…

  18. Genetics Home Reference: Pyle disease

    Science.gov (United States)

    ... Superti-Furga A, Baron R. Cortical-Bone Fragility--Insights from sFRP4 Deficiency in Pyle's Disease. N Engl ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  19. Genetics Home Reference: atopic dermatitis

    Science.gov (United States)

    ... 0b013e32830e6fb2. Review. Citation on PubMed Shaker M. New insights into the allergic march. Curr Opin Pediatr. 2014 ... healthcare professional . About Genetics Home Reference Site Map Customer Support Selection Criteria for Links USA.gov Copyright ...

  20. Haemostatic reference intervals in pregnancy

    DEFF Research Database (Denmark)

    Szecsi, Pal Bela; Jørgensen, Maja; Klajnbard, Anna;

    2010-01-01

    Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age-specific refe......Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age......-specific reference intervals for coagulation tests during normal pregnancy. Eight hundred one women with expected normal pregnancies were included in the study. Of these women, 391 had no complications during pregnancy, vaginal delivery, or postpartum period. Plasma samples were obtained at gestational weeks 13......-20, 21-28, 29-34, 35-42, at active labor, and on postpartum days 1 and 2. Reference intervals for each gestational period using only the uncomplicated pregnancies were calculated in all 391 women for activated partial thromboplastin time (aPTT), fibrinogen, fibrin D-dimer, antithrombin, free protein S...