WorldWideScience

Sample records for bio bleaching technologies

  1. Mill Designed Bio bleaching Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Institute of Paper Science Technology

    2004-01-30

    A key finding of this research program was that Laccase Mediator Systems (LMS) treatments on high-kappa kraft could be successfully accomplished providing substantial delignification (i.e., > 50%) without detrimental impact on viscosity and significantly improved yield properties. The efficiency of the LMS was evident since most of the lignin from the pulp was removed in less than one hour at 45 degrees C. Of the mediators investigated, violuric acid was the most effective vis-a-vis delignification. A comparative study between oxygen delignification and violuric acid revealed that under relatively mild conditions, a single or a double LMS{sub VA} treatment is comparable to a single or a double O stage. Of great notability was the retention of end viscosity of LMS{sub VA} treated pulps with respect to the end viscosity of oxygen treated pulps. These pulps could then be bleached to full brightness values employing conventional ECF bleaching technologies and the final pulp physical properties were equal and/or better than those bleached in a conventional ECF manner employing an aggressively O or OO stage initially. Spectral analyses of residual lignins isolated after LMS treated high-kappa kraft pulps revealed that similar to HBT, VA and NHA preferentially attack phenolic lignin moieties. In addition, a substantial decrease in aliphatic hydroxyl groups was also noted, suggesting side chain oxidation. In all cases, an increase in carboxylic acid was observed. Of notable importance was the different selectivity of NHA, VA and HBT towards lignin functional groups, despite the common N-OH moiety. C-5 condensed phenolic lignin groups were overall resistant to an LMS{sub NHA, HBT} treatments but to a lesser extent to an LMS{sub VA}. The inactiveness of these condensed lignin moieties was not observed when low-kappa kraft pulps were biobleached, suggesting that the LMS chemistry is influenced by the extent of delignification. We have also demonstrated that the current

  2. Bio-technologies; Biotechnologies

    Energy Technology Data Exchange (ETDEWEB)

    Grawitz, X. [Systems Bio Industries, 92 - Boulogne Billancourt (France)

    1997-12-31

    This paper is a series of transparencies which describes the measures taken by Systems Bio-Industries company to adapt its central heating plants, turbines, engines and dryers to the new French 2910 by-law about thermal efficiency and environmental impact of heating plants. The project of development of a cogeneration system in the Angouleme site is briefly described. (J.S.)

  3. Agriculture and bio-technology

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, Hikoyuki

    1987-09-01

    The Japanese agriculture is going to be influenced by bio-technology. New style of production will be introduced through the entrance of other type of enterprises causing considerable change in agricultural fields. Bio-technology is a technology which utmost utilizes the functions of the living organism. Its practical target is to manifestate a new function by deliberately endowing it to an organism. Major technique is gene manipulation, tissue culture and utilization of microorganism and cells as well as the utilization of the biomass resources and a production means in the vegetable plant using nutricious solution. This report especially describes the following matters. Recombinant DNA (Super mouse, etc). Cell fusion (Monoclonal antigen, etc). Nucleus transplantation. Chromosome manipulation (Creation of tripoloid, etc). tissue culture (Growing of virus-free seedling, etc). Production of useful substances. Biomass (Forestry, Ocean, Livestock). (2 figs, 3 tabs, 12 refs)

  4. Laccases, Manganese Peroxidases and Xylanases used for the bio-bleaching of paper pulp; an environmental friendly approach.

    Science.gov (United States)

    Saleem, Rabia; Khurshid, Mohsin; Ahmed, Safia

    2018-01-21

    The paper and pulp industry is a capital and resource-intensive industry that contributes to ecosystem toxicity and affects human beings. Bio-bleaching is a promising substitute for chlorine-based chemical methods in the bleaching process. In this study xylanase, laccase and manganese peroxidase isolated from white rot fungi were used for pre-bleaching and bleaching of oven-dried wheat straw pulp. During the sequential enzymatic treatment of oven-dried pulp, the brightness was improved and kappa number was reduced by 3.1% and 3.1 points respectively after xylanase treatment, 0.3% and 0.4 points after laccase treatment and 3% and 0.2 points after MnP treatment. During separate treatment of pulp samples with individual enzymes, brightness and kappa number improved by 8% and 3 points respectively after xylanase treatment, by 5% and 1.7 points after laccase treatment and 5% and 1.8 points after treatment with MnP. During subsequent treatment with 4% sodium hypochlorite, the brightness was further improved by 27.9 % for xylanase-treated pulp and 29% for the laccase and MnP treated pulp. The xylanase was found most efficient in comparison to laccase and MnP in the reduction of kappa number and improvement of brightness. These results clearly indicate the role of laccase, MnP and xylanase from white rot fungi as effective bio-bleaching agents. Therefore these enzymes can facilitate the bleaching process without threat to the environment. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  5. Effect of spent bleaching earth based bio organic fertilizer on growth, yield and quality of eggplants under field condition

    Science.gov (United States)

    Cheong, K. Y.; Loh, S. K.; Salimon, J.

    2013-11-01

    Spent bleaching earth (SBE) is a solid waste generated from the bleaching process in palm oil industry. This solid waste is currently disposed directly in landfills without treatment, causing severe water and air pollution. Recently, dumping of SBE in landfills or public disposal sites has been prohibited in most countries. Meanwhile, high costs associated with the large area of land needed for storage of the residue has lead to the interest in regenerate SBE. Thus, a recent novel approach has been carried out on the utilization of SBE in agriculture as an alternative method for disposal. In this study, a field experiment was conducted at an experimental plot in Plant House National University Malaysia to evaluate the effect of SBE on the growth and quality of eggplant. Growth and quality parameters of eggplant including total fruit yield, total biomass, macronutrients concentration of leaf were studied through close monitoring and assessment. Field trials conducted showed that SBE is effective in promoting eggplant growth and nutrient uptake compared to the control treatment under field conditions. Therefore, with the proper and effective ways in handling SBE through conversion of SBE into beneficial bio organic fertilizer, this material which is a waste in the past will become an advantage in agriculture as a substitute for commercial fertilizers.

  6. Nano technologies for Biosensor and Bio chip

    International Nuclear Information System (INIS)

    Kim, I.M.; Park, T.J.; Paskaleva, E.E.; Sun, F.; Seo, J.W.; Mehta, K.K.

    2015-01-01

    The bio sensing devices are characterized by their biological receptors, which have specificity to their corresponding analytes. These analytes are a vast and diverse group of biological molecules, DNAs, proteins (such as antibodies), fatty acids, or entire biological systems, such as pathogenic bacteria, viruses, cancerous cells, or other living organisms. A main challenge in the development of biosensor applications is the efficient recognition of a biological signal in a low signal-to-noise ratio environment, and its transduction into an electrochemical, optical, or other signals. The advent of nano material technology greatly increased the potential for achieving exquisite sensitivity of such devises, due to the innate high surface-to-volume ratio and high reactivity of the nano material. The second major challenge facing the biosensor application, that of sca lability, is addressed by multiplexing and miniaturizing of the biosensor devises into a bio chip. In recent years, biosensor and bio chip technologies have made significant progress by taking advantages of diverse kinds of nano materials that are derived from nano technology

  7. The Future of Bio-technology

    Science.gov (United States)

    Trent, Jonathan

    2005-01-01

    Hosts of technologies, most notably in electronics, have been on the path of miniaturization for decades and in 2005 they have crossed the threshold of the nano-scale. Crossing the nano-scale threshold is a milestone in miniaturization, setting impressive new standards for component-packing densities. It also brings technology to a scale at which quantum effects and fault tolerance play significant roles and approaches the feasible physical limit form many conventional "top-down" manufacturing methods. I will suggest that the most formidable manufacturing problems in nanotechnology will be overcome and major breakthroughs will occur in a host of technologies, when nanotechnology converges with bio-technology; i.e. I will argue that the future of bio-technology is in nanotechnology. In 2005, methods in molecular biology, microscopy, bioinformatics, biochemistry, and genetic engineering have focused considerable attention on the nano-scale. On this scale, biology is a kind of recursive chemistry in which molecular recognition, self-assembly, self-organization and self-referencing context-control lead to the emergence of the complexity of structures and processes that are fundamental to all life forms. While we are still far from understanding this complexity, we are on the threshold of being able to use at least some of these biological properties for .technology. I will discuss the use of biomolecules, such as DNA, RNA, and proteins as "tools" for the bio-technologist of the future. More specifically, I will present in some detail an example of how we are using a genetically engineered 60-kDa protein (HSP60) from an organism living in near boiling sulfuric acid to build nano-scale templates for arranging metallic nanoparticles. These "extremophile" HSP60s self-assemble into robust double-ring structures called "chaperonins," which further assemble into filaments and arrays with nanometer accuracy. I will discuss our efforts to use chaperonins to organize quantum

  8. Advancements in Bio-radar Speech Signal Detection Technology

    Directory of Open Access Journals (Sweden)

    Chen Fuming

    2016-10-01

    Full Text Available Speech signal acquisition is of great significance for human communication. Bio-radar technology has many advantages, such as it is noncontact, noninvasive, safe, highly directional, highly sensitivity, immune to strong acoustical disturbance and penetrable. This technology has important applications in the field of speech detection. In this paper, we first review the developmental history of speech detection technology, and then summarize the status of bio-radar speech detection technology. The basic principles of a bio-radar in detecting speech signals are given, and the performance of three types of bio-radar speech detection systems are compared in this paper. Finally, the potential applications of bio-radar speech signal detection technology are prospected.

  9. Advancements in Bio-radar Speech Signal Detection Technology

    OpenAIRE

    Chen Fuming; Li Sheng; An Qiang; Zhang Ziqi; Wang Jianqi

    2016-01-01

    Speech signal acquisition is of great significance for human communication. Bio-radar technology has many advantages, such as it is noncontact, noninvasive, safe, highly directional, highly sensitivity, immune to strong acoustical disturbance and penetrable. This technology has important applications in the field of speech detection. In this paper, we first review the developmental history of speech detection technology, and then summarize the status of bio-radar speech detection technolog...

  10. Nano-Bio Quantum Technology for Device-Specific Materials

    Science.gov (United States)

    Choi, Sang H.

    2009-01-01

    The areas discussed are still under development: I. Nano structured materials for TE applications a) SiGe and Be.Te; b) Nano particles and nanoshells. II. Quantum technology for optical devices: a) Quantum apertures; b) Smart optical materials; c) Micro spectrometer. III. Bio-template oriented materials: a) Bionanobattery; b) Bio-fuel cells; c) Energetic materials.

  11. Nova tecnologia de branqueamento de celulose adaptada ao fechamento do circuito de água A novel bleaching technology adapted to partial bleach plant closure

    Directory of Open Access Journals (Sweden)

    Marcelo Moreira Costa

    2006-02-01

    (EOPD(EPD and D(EOPDP, respectively. The mill has an activated sludge effluent treatment plant comprised of two aeration tanks with 20,000 m3 and it is equipped with superficial aerators followed by four secondary clarifiers (two for each reactor. In the last decades, CENIBRA has been optimizing and changing its processes in order to improve environmental performance. Aiming at decreasing effluent volume, COD and AOX loads, the Ahot(EOPD(PO sequence has been proposed and evaluated in lab-scale trials, with partial filtrate recycling. This paper proposes a filtrate recycling scheme that reduces bleach plant effluent volume by 9 m3/adt (air dry ton, i.e., about 50% of the total. The filtrate saved is partially diverted to the recausticizing cycle and to post oxygen washers. The reutilization of the Ahot filtrate in the recausticizing cycle to replace the filtrates currently used to wash lime mud and dregs was shown suitable. The impact of NPE´s in the calcium cycle was not significant. This strategy allowed a recovery of c.a. 12 kg NaOH/adt of pulp that would otherwise be wasted. Pulp bleachability and quality was not significantly affected. The discharged effluent coming from D(PO stages (about 50% showed low color, COD and AOX loads, and good bio-treatability (DBO5/COD.

  12. Development of production technology for bio diesel fuel and feasibility test of bio diesel engine (II)

    Energy Technology Data Exchange (ETDEWEB)

    Na, Y.J.; Ju, U.S.; Park, Y.C. [National Kyung Sang University (Korea, Republic of)

    1996-02-01

    At the beginning of the 21 st century two urgent tasks which our global countries would face with could be the security of the alternative energy source as a preparation against the fossil energy exhaustion and the development of the clean energy source to protect the environment from pollution. The above two problems should be solved together. The bio diesel oil which is made by methylesterfication of bio oil has very low sulfur content than does the diesel oil. Therefore, there is a great possibility to solve the pollution problem caused by the exhaust gas from diesel engine vehicles. So, bio oil has been attracted with attentions as an alternative and clean energy source. Advanced countries began early to develop the bio diesel oil suitable to their respective conditions. Recently their production stage have reached to the commercial level partially. The sudden increase of energy demand followed by a rapid growth of industry and the serious situation about the environmental pollution caused by the exhaust has from diesel engine vehicles occupying 42% of distribution among all vehicles have called attention of our government to consider the importance of alternative and clean energy sources for the future on the national scale. This study is consisted of three main parts; - The development of production technology for bio diesel oil. - The development of the atomization improvement method and nozzle for high viscous vegetable oils. - Feasibility test of bio diesel engine. (author) 119 refs., 52 tabs., 88 figs.

  13. New York Nano-Bio Molecular Information Technology (NYNBIT) Incubator

    Energy Technology Data Exchange (ETDEWEB)

    Das, Digendra K

    2008-12-19

    This project presents the outcome of an effort made by a consortium of six universities in the State of New York to develop a Center for Advanced technology (CAT) in the emerging field of Nano-Bio-Molecular Information Technology. The effort consists of activities such as organization of the NYNBIT incubator, collaborative research projects, development of courses, an educational program for high schools, and commercial start-up programs.

  14. Peroxy bleaches

    International Nuclear Information System (INIS)

    Carson, P.A.; Fairclough, C.S.; Mauduit, C.; Colsell, M.

    2006-01-01

    Fabric laundering is now a sophisticated chemical process involving a variety of operations including bleaching. The chemistry of peroxy bleaches is described including the use of novel organic compounds to provide effective bleaching at the lower temperatures of modern wash cycles. The instability of peroxy compounds is illustrated using cameo case histories to relate theory and practice. Techniques available for determining their thermochemistry are summarised. A model is provided for hazard and risk assessment of development projects in general (particularly those involving new molecules, processes or formulations) from ideas phase through exploratory laboratory investigations to pilot plant scale-up and eventual manufacture and commercial exploitation. This paper is a prelude to Part 2, which describes the determination of thermodynamic and kinetic properties of peroxy bleaches and discusses the implication of the results in terms of precautions for their safe storage and incorporation into detergent formulations during processing

  15. Semantic Technologies and Bio-Ontologies.

    Science.gov (United States)

    Gutierrez, Fernando

    2017-01-01

    As information available through data repositories constantly grows, the need for automated mechanisms for linking, querying, and sharing data has become a relevant factor both in research and industry. This situation is more evident in research fields such as the life sciences, where new experiments by different research groups are constantly generating new information regarding a wide variety of related study objects. However, current methods for representing information and knowledge are not suited for machine processing. The Semantic Technologies are a set of standards and protocols that intend to provide methods for representing and handling data that encourages reusability of information and is machine-readable. In this chapter, we will provide a brief introduction to Semantic Technologies, and how these protocols and standards have been incorporated into the life sciences to facilitate dissemination and access to information.

  16. Bio-energy in Europe: changing technology choices

    International Nuclear Information System (INIS)

    Faaij, Andre P.C.

    2006-01-01

    Bio-energy is seen as one of the key options to mitigate greenhouse gas emissions and substitute fossil fuels. This is certainly evident in Europe, where a kaleidoscope of activities and programs was and is executed for developing and stimulating bio-energy. Over the past 10-15 years in the European Union, heat and electricity production from biomass increased with some 2% and 9% per year, respectively, between 1990 and 2000 and biofuel production increased about eight-fold in the same period. Biomass contributed some two-thirds of the total renewable energy production in the European Union (EU) (2000 PJ) or 4% of the total energy supply in 1999. Given the targets for heat, power and biofuels, this contribution may rise to some 10% (6000 PJ) in 2010. Over time, the scale at which bio-energy is being used has increased considerably. This is true for electricity and combined heat and power plants, and how biomass markets are developing from purely regional to international markets, with increasing cross-border trade-flows. So far, national policy programs proved to be of vital importance for the success of the development of bio-energy, which led to very specific technological choices in various countries. For the future, a supra-national approach is desired: comprehensive research development, demonstration and deployment trajectories for key options as biomass integrated gasification/combined cycle and advanced biofuel concepts, develop an international biomass market allowing for international trade and an integral policy approach for bio-energy incorporating energy, agricultural, forestry, waste and industrial policies. The Common Agricultural Policy of the (extended) EU should fully incorporate bio-energy and perennial crops in particular

  17. BLEACHING NEPTUNE BALLS

    Directory of Open Access Journals (Sweden)

    BONET Maria Angeles

    2014-05-01

    Full Text Available Posidonia Oceanic is a seaweed from Mediterranean Sea and it is more concentrated at the Balerian SEA. This implies the Valencian Community also. It forms vaste underwater meadows in the sea and are part of the Mediterranean ecosystem. It is a sea-grass specie with fruits and flowers. Leaves are ribbon-like and they grow in winter and at the end of summer some of them are separated and arrive to some sea line. Fuit is separated and can floate, it is known as “the olive of the sea” mainly in Italy, or as the Neptune Balls. As it can be used in different fields, it is is being studied in order ro have the precitice tests. Some authors have reported the manufacturing of fully bio-based comites with a gluten matrix by hot-press molding. And it has been considered as an effective insulator for building industry or even though to determine the presence of mercure in the Mediterranean sea some years ago. As many applications can be designed from that fibers, it has been considered to be bleached in order to used them in fashionable products. Consequently, its original brown color is not the most suitable one and it should be bleached as many other cellulosic fibers. The aim of this paper is to bleache neptune balls however, the inner fibers were not accessible at all and it implied not to bleach the inner fibers in the neptune ball. Further studiesd will consider bleaching the individualized fibers.

  18. Center for BioBased Binders and Pollution Reduction Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

    2013-07-01

    Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

  19. Biogas and BioFertilizer Production Using Green Technology

    International Nuclear Information System (INIS)

    Sirirote, Pramote

    2010-01-01

    Basically, it is technology which created and used in a way that conserves natural resources and the environment. This technology also can be environmental friendly because the use of this technology is supposed to reduce the amount of waste and pollution that is created during production and consumption. These food wastes will come from animal bone, crab skeleton, fish skeleton, rice, noodle, vegetable and others. We collect all of these wastes and then keep it in plants, and then we make sure that this waste will turn into biogas via anaerobic digestion. All of these involved hydrolysis, fermentation, aceto genesis and methano genesis process. Methane that produced will be used in biomass plant to generate electricity. Meanwhile bio fertilizer that produced will be applied on agriculture sectors as fertilizer for plants.

  20. Description of Ethical Bio-Technology Assessment Tools for Agriculture and Food Production. Interim Report Ethical Bio-TA Tools

    NARCIS (Netherlands)

    Beekman, V.

    2004-01-01

    The objective of 'Ethical Bio-TA Tools' project is to develop and improve tools for the ethical assessment of new technologies in agriculture and food production in general and modern biotechnologies in particular. The developed tools need to be designed for various purposes and contexts. They

  1. The environmentally friendly technology for bio fuel production

    International Nuclear Information System (INIS)

    Bekers, M.; Danilevics, A.; Guriniece, E.; Gulbis, V.

    2003-01-01

    Full text: Bio fuel production and use have been discussed this time in EC and in Latvia as alternative energy sources. The national resources allow producing liquid fuels - bio diesel and bi oethanol from rape seeds and grain correspondingly. Liquid bio fuels can be recommended especially for auto transport in big towns to reduce the pollution of air. A system for environmentally friendly production of bio fuel from agricultural raw materials has been developed, which permit a complex utilization of byproducts an wastes for obtaining of valuable food-stuffs and industrial products, providing the agricultural production requirements and supporting with local mineral fertilizers. Such a bio fuel production includes the agricultural and industrial productions in a united biotechnological system. Production objects of system interact: the products, by-products and wastes from one object are used as raw materials, auxiliary materials or heat carriers in other system's objects. This integrated agro-industrial production system would allow the production of feeds and chemical products, along with bio fuels. In this work, a model of a system for a conventional administrative rural region is presented, exemplified with the case of Latvia. The model is developed for three forms of bio fuel production, i.e. ethanol, bio diesel and biogas as local energy source. Bio diesel is produced using ethanol as transesterifying agent of rape-seed oil fatty acids. This bio diesel is a blend of rape-seed oil fatty acid ethyl esters (REE) and consists solely from renewable raw materials. The capacity of distillery of system is 40 million litters per year and bio diesel 35000 ton. Important for agriculture is protein reach press cakes the byproduct from bio diesel production (66000 t/y). This byproduct can be exported as well. Biogas reactors of system can be used for utilization of wastes from town if necessary. Recommended bio system occupates up to 150.000 ha of agriculture lands

  2. Advanced biomass science and technology for bio-based products: proceedings

    Science.gov (United States)

    Chung Hse; Zehui Jiang; Mon-Lin Kuo

    2009-01-01

    This book was developed from the proceedings of the Advanced Biomass Science and Technology for Bio-Based Products Symposium held in Beijing, China, May 23-25, 2007. The symposium was designed to provide a forum for researchers, producers, and consumers of biomass and bio-based products; to exchange information and ideas; and to stimulate new research and...

  3. A study of the use of bio-based technologies (lubricant and grease) in rail applications.

    Science.gov (United States)

    2014-05-01

    The objective of the project was to study the efficacy of using bio-based lubricant and grease technologies in railroad applications : (locomotives and maintenance of way equipment). Several commercially available rail curve greases were identified a...

  4. Bio-Nanotechnology Infrastructure and Technology Oriented Research

    National Research Council Canada - National Science Library

    Jones, W. K

    2008-01-01

    .... Five projects were supported: next generation information storage devices-both three-dimensional magnetic and protein-based, high power cold cathodes for microwave generators, carbon nanotube-based bio-sensors, silicon/polymer...

  5. TO APPLICATION OF BIO-GAS UNITS: ORGANIZATIONAL AND TECHNOLOGICAL MODEL

    Directory of Open Access Journals (Sweden)

    Thuy Nga Nguyen

    2011-01-01

    Full Text Available Analysis of the published papers written by national and foreign researchers reveals that an increasing global energy deficit, exhaustion of  fossil organic and nuclear fuels, chemical and radio-active contamination of the environment are main reasons in favour of  thorough investigation  and wide introduction of non-conventional and renewable energy sources. Nowadays Vietnamese Institute of Energy Science has been developing the state-of-the-art bio-gas technologies on the  basis of application and modernization of Chinese and Dutch family-style technologies. The most rational technologies are combined ones which operate using various types of energy raw materials, for example, solar and bio-gas energy because usage of solar energy expands operational possibilities of the bio-gas system, ensures its operation within wide temperature range creating necessary parameters for the required technological task.

  6. The state-of-the-art laser bio-cladding technology

    Science.gov (United States)

    Liu, Jichang; Fuh, J. Y. H.; Lü, L.

    2010-11-01

    The current state and future trend of laser bio-cladding technology are discussed. Laser bio-cladding is used in implants including fabrication of metal scaffolds and bio-coating on the scaffolds. Scaffolds have been fabricated from stainless steel, Co-based alloy or Ti alloy using laser cladding, and new laser-deposited Ti alloys have been developed. Calcium phosphate bioceramic coatings have been deposited on scaffolds with laser to improve the wear resistence and corrosion resistence of implants and to induce bone regeneration. The types of biomaterial devices currently available in the market include replacement heart valve prosthesis, dental implants, hip/knee implants, catheters, pacemakers, oxygenators and vascular grafts. Laser bio-cladding process is attracting more and more attentions of people.

  7. Vital tooth bleaching with Nightguard vital bleaching.

    Science.gov (United States)

    Haywood, V B; Robinson, F G

    1997-01-01

    Between July 1994 and May 1996, several landmark articles were published concerning the safety and efficacy of vital tooth bleaching with 10% carbamide peroxide in a customfitted tray. The American Dental Association (ADA) published guidelines for ADA acceptance, and three products received approval. Long-term clinical trials on 38 patients indicated 92% successful bleaching after 6 weeks of treatment. Results were stable in 74% of the patients at 1.5 years, and in 62% of the patients at 3-year follow-up with no further treatment. Clinical pulpal studies and periodontal studies indicated no detrimental safety problems, although some laboratory cell studies suggested concerns. The noncarcinogenic potential of 10% carbamide peroxide was established in animal studies. Successful bleaching of tetracycline-stained teeth was achieved after 6 months of treatment, with no tooth problems detected clinically or by scanning electron micrograph. Extended treatment times are effective on other stains from dentinogenesis imperfecta or nicotine. On insertion in the mouth, 10% carbamide peroxide elevated the pH in the tray and saliva. After 4 hours of clinical wear, over 60% of the newer, thicker materials (Opalescence [Ultraclent Products, South Jordon, UT] and Platinum [Colgate Oral Pharmaceuticals, Canton, MA]) was present and active in the tray. Nightguard vital bleaching seems to be the most cost-efficient, user-friendly, patient-accepted method of bleaching teeth available to the profession and is safe and effective. Over-the-counter products can have harmful effects on tooth structure and may not lighten teeth.

  8. CONVERGENCE OF NANO-, BIO-, INFO-, COGNITIVE TECHNOLOGIES AND E-CULTURE

    Directory of Open Access Journals (Sweden)

    Sergey I. Rodzin

    2014-01-01

    Full Text Available The article analyzes the convergence of nano-, bio-, info- and cognitive technologies. We highlight the close relationship of such notions as “e-culture”, “consciousness”, “artificial intelligence”. Artificial intelligence technology is the meta-NBIC-complex itself. Electronic infrastructure of intellectual activity - the essence of artificial intelligence and artificial intelligence technologies play a meta-level role of NBIC- technologies, being significant for e-culture. Development of science, technology, and education suggests that in the future perhaps a radical transformation in human beings is not only the material world, but also a subjective reality. 

  9. Bleach vs. Bacteria

    Science.gov (United States)

    ... Articles | Inside Life Science Home Page Bleach vs. Bacteria By Sharon Reynolds Posted April 2, 2014 Your ... hypochlorous acid to help kill invading microbes, including bacteria. Researchers funded by the National Institutes of Health ...

  10. Evaluation of complementary technologies to reduce bio engine emissions

    Energy Technology Data Exchange (ETDEWEB)

    Blowes, J.H.

    2003-09-01

    This report summaries the results of a study examining the technical and economic feasibility of exhaust gas treatment technologies for reducing emissions from diesel engines burning pyrolysis oil to within internationally recognised limits. Details are given of the burning of pyrolysis oils in reciprocating engines, the reviewing of information on pyrolysis oils and engines, and the aim to produce detailed information for securing investment for a British funded diesel project. The burning of the pyrolysis oils in an oxygen-rich atmosphere to allow efficient combustion with acceptable exhaust emission limits is discussed along with the problems caused by the deterioration of the injection system.

  11. Bio-Microfluidics Real-Time Monitoring Using CNN Technology.

    Science.gov (United States)

    Sapuppo, F; Intaglietta, M; Bucolo, M

    2008-06-01

    A new non-invasive real-time system for the monitoring and control of microfluidodynamic phenomena involving transport of particles and two phase fluids is proposed. The general purpose design of such system is suitable for in vitro and in vivo experimental setup and, therefore, for microfluidic applications in the biomedical field, such as lab-on-chip and for research studies in the field of microcirculation. The system consists of an ad hoc optical setup for image magnification providing images suitable for acquisition and processing. The main feature of the optical system is the accessibility of the information at any point of the optical path. It was designed and developed using discrete opto-mechanic components mounted on a breadboard. The optical sensing, acquisition, and processing were all performed using an integrated vision system based on cellular nonlinear networks (CNNs) analogic (analog plus logic) technology called focal plane processor (FPP, Eye-RIS, Anafocus) that was inserted in the optical path. Ad hoc algorithms were implemented for the real-time analysis and extraction of fluidodynamic parameters in micro-channels. They were firstly tested on sequences of images recorded during in vivo microcirculation experiments on hamsters and then applied on images acquired and processed in real-time during in vitro experiments on two-phase fluid flow in a continuous microfluidic device (serpentine mixer, ThinXXS).

  12. Nano-bio-sensing

    CERN Document Server

    Carrara, Sandro

    2011-01-01

    This book examines state-of-the-art applications of nano-bio-sensing. It brings together researchers from nano-electronics and bio-technology, providing multidisciplinary content from nano-structures fabrication to bio-sensing applications.

  13. Synthetics, mineral oils, and bio-based lubricants chemistry and technology

    CERN Document Server

    Rudnick, Leslie R

    2005-01-01

    As the field of tribology has evolved, the lubrication industry is also progressing at an extraordinary rate. Updating the author's bestselling publication, Synthetic Lubricants and High-Performance Functional Fluids, this book features the contributions of over 60 specialists, ten new chapters, and a new title to reflect the evolving nature of the field: Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology. The book contains chapters on all major lubricant fluids used in a wide range of applications. For each type of lubricant, the authors discuss the historical develo

  14. Bio-conventional bleaching of kadam kraft-AQ pulp by thermo-alkali-tolerant xylanases from two strains of Coprinellus disseminatus for extenuating adsorbable organic halides and improving strength with optical properties and energy conservation.

    Science.gov (United States)

    Lal, Mohan; Dutt, Dharm; Tyagi, C H

    2012-04-01

    Two novel thermo-alkali-tolerant crude xylanases namely MLK-01 (enzyme-A) and MLK-07 (enzyme-B) from Coprinellus disseminatus mitigated kappa numbers of Anthocephalus cadamba kraft-AQ pulps by 32.5 and 34.38%, improved brightness by 1.5 and 1.6% and viscosity by 5.75 and 6.47% after (A)XE(1) and (B)XE(1)-stages, respectively. The release of reducing sugars and chromophores was the highest during prebleaching of A. cadamba kraft-AQ pulp at enzyme doses of 5 and 10 IU/g, reaction times 90 and 120 min, reaction temperatures 75 and 65°C and consistency 10% for MLK-01 and MLK-07, respectively. MLK-07 was more efficient than MLK01 in terms of producing pulp brightness, improving mechanical strength properties and reducing pollution load. MLK-01 and MLK-07 reduced AOX by 19.51 and 42.77%, respectively at 4% chlorine demands with an increase in COD and colour due to removal of lignin carbohydrates complexes. A. cadamba kraft-AQ pulps treated with xylanases from MLK-01 to MLK-07 and followed by CEHH bleaching at half chlorine demand (2%) showed a drastic reduction in brightness with slight improvement in mechanical strength properties compared to pulp bleached at 4% chlorine demand. MLK-01 reduced AOX, COD and colour by 43.83, 39.03 and 27.71% and MLK-07 by 38.34, 40.48 and 30.77%, respectively at half chlorine demand compared to full chlorine demand (4%). pH variation during prebleaching of A. cadamba kraft-AQ pulps with strains MLK-01 and MLK-07 followed by CEHH bleaching sequences showed a decrease in pulp brightness, AOX, COD and colour with an increase in mechanical strength properties, pulp viscosity and PFI revolutions to get a beating level of 35 ± 1 °SR at full chlorine demand.

  15. Bio-Refineries Bioprocess Technologies for Waste-Water Treatment, Energy and Product Valorization

    Science.gov (United States)

    Keith Cowan, A.

    2010-04-01

    Increasing pressure is being exerted on communities and nations to source energy from forms other than fossil fuels. Also, potable water is becoming a scarce resource in many parts of the world, and there remains a large divide in the demand and utilization of plant products derived from genetically modified organisms (GMOs) and non-GMOs. The most extensive user and manager of terrestrial ecosystems is agriculture which is also the de facto steward of natural resources. As stated by Miller (2008) no other industry or institution comes close to the comparative advantage held for this vital responsibility while simultaneously providing food, fiber, and other biology-based products, including energy. Since modern commercial agriculture is transitioning from the production of bulk commodities to the provision of standardized products and specific-attribute raw materials for differentiated markets, we can argue that processes such as mass cultivation of microalgae and the concept of bio-refineries be seen as part of a `new' agronomy. EBRU is currently exploring the integration of bioprocess technologies using microalgae as biocatalysts to achieve waste-water treatment, water polishing and endocrine disruptor (EDC) removal, sustainable energy production, and exploitation of the resultant biomass in agriculture as foliar fertilizer and seed coatings, and for commercial extraction of bulk commodities such as bio-oils and lecithin. This presentation will address efforts to establish a fully operational solar-driven microalgae bio-refinery for use not only in waste remediation but to transform waste and biomass to energy, fuels, and other useful materials (valorisation), with particular focus on environmental quality and sustainability goals.

  16. Performance evaluation of the BioCAST technology: a new multi-zone wastewater treatment system.

    Science.gov (United States)

    Yerushalmi, L; Alimahmoodi, M; Mulligan, C N

    2011-01-01

    A new wastewater treatment technology, called BioCAST, has been designed and developed for high rate and simultaneous removal of organic carbonaceous compounds as well as nitrogen and phosphorus, along with reduced sludge generation. The treatment system has two interlinked reactors containing four independent zones with different environmental conditions of aerobic, microaerophilic, anoxic and anaerobic for the biological treatment of wastewater, as well as two clarification zones and a filtration unit for solid-liquid separation. The treatment system contains suspended as well as fixed-film microorganisms. The performance evaluation of the BioCAST system was carried out at organic loading rates of 0.95 to 1.86 kg/m(3) d, and nitrogen and phosphorus loading rates of 0.02 to 0.08 kg/m(3) d and 0.014 to 0.02 kg/m(3) d, respectively. The results demonstrated high removal efficiencies of carbon and nitrogen throughout the operation period, reaching 98.9 and 98.3%, respectively. Phosphorus removal efficiency was lower than 50% during the first 160 days of operation but it increased with the increase of nitrogen loading rate above 0.05 kg/m(3) day and concomitant reduction of C/N ratio below 15. Phosphorus removal efficiency reached 94.1%, producing an effluent concentration of 1.4 mg/L after 225 days of operation. The overall biomass yield based on the consumed COD was 3.7%.

  17. Study on rapid bio-drying technology of cow dung with CaO2

    Science.gov (United States)

    Chen, Xiaotian; Qu, Guangfei; Liu, Shugen; Xie, Ruosong; He, Yanhua

    2017-05-01

    Effect of CaO2 on cow dung rapid bio-drying technology was researched. A static aerobic composting system was applied to this experiment which combining natural ventilation with Turing in the process of composting. The physical characteristics of cow dung was observed and the compost temperature, moisture content, organic matter, total nitrogen, total phosphorus, potassium content was determined which in order to study the effect of CaO2 on rapid drying of cattle in the compost. In the initial stage of compost, adding CaO2 groups compared with the control group, the temperature rise faster, 4-6 days in advance to the thermophilic phase; at the end of composting, the CaO2 composition and moisture content decreased significantly to below 30%. The addition of CaO2 in fertilizer was shorten the composting time, extend the thermophilic phase, to provide sufficient oxygen meeting the growth needs of aerobic microorganisms. It convinced that the rapid bio-drying of dairy manure has a good effect and provided a new idea for the effective treatment of cow dung.

  18. A primer to 'bio-objects': new challenges at the interface of science, technology and society.

    Science.gov (United States)

    Dabrock, Peter; Braun, Matthias; Ried, Jens; Sonnewald, Uwe

    2013-06-01

    Biotechnological and life science innovations do not only lead to immense progress in diverse fields of natural science and technical research and thereby drive economic development, they also fundamentally affect the relationship between nature, technology and society. Taken this seriously, the ethical and societal assessment of emerging biotechnologies as for example synthetic biology is challenged not only to constrain on questions of biosafety and biosecurity but also to face the societal questions within the different fields as an interface problem of science and society. In order to map this vague and stirring field, we propose the concept of bio-objects to explore the reciprocal interaction at the interface of science and society serious as well to have the opportunity to detect possible junctions of societal discontent and unease before their appearance.

  19. Cost (non)-recovery by platform technology facilities in the Bio21 Cluster.

    Science.gov (United States)

    Gibbs, Gerard; Clark, Stella; Quinn, Julieanne; Gleeson, Mary Joy

    2010-04-01

    Platform technologies (PT) are techniques or tools that enable a range of scientific investigations and are critical to today's advanced technology research environment. Once installed, they require specialized staff for their operations, who in turn, provide expertise to researchers in designing appropriate experiments. Through this pipeline, research outputs are raised to the benefit of the researcher and the host institution. Platform facilities provide access to instrumentation and expertise for a wide range of users beyond the host institution, including other academic and industry users. To maximize the return on these substantial public investments, this wider access needs to be supported. The question of support and the mechanisms through which this occurs need to be established based on a greater understanding of how PT facilities operate. This investigation was aimed at understanding if and how platform facilities across the Bio21 Cluster meet operating costs. Our investigation found: 74% of platforms surveyed do not recover 100% of direct operating costs and are heavily subsidized by their home institution, which has a vested interest in maintaining the technology platform; platform managers play a major role in establishing the costs and pricing of the facility, normally in a collaborative process with a management committee or institutional accountant; and most facilities have a three-tier pricing structure recognizing internal academic, external academic, and commercial clients.

  20. Convergence of knowledge, technology and society beyond convergence of nano-bio-info-cognitive technologies

    CERN Document Server

    Bainbridge, William; Tonn, Bruce; Whitesides, George

    2013-01-01

    Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the 21st century, based on five principles: (1) the interdependence of all components of nature and society, (2) enhancement of creativity and innovation through evolutionary processes of convergence that combine existing principles, and divergence that generates new ones, (3) decision analysis for research and development based on system-logic deduction, (4) higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) vision-inspired basic research embodied in grand challenges. Solutions are outlined for key societal challenges, including creating new industries and jobs, improving lifelong wellness and human potential, achieving personalized and integrated healthcare and education, and securing a sustainable quality of life for all. This report provides a ten-year “NBIC2” vision within a longer-term framework for converging technology and human...

  1. BioKonversion technology recovers, remediates and reuses waste and hydrocarbons from oil drilling

    Energy Technology Data Exchange (ETDEWEB)

    Topf, A.

    2008-01-15

    Houston-based Nopal Group has developed a solution to dispose of oilfield waste in a safe and cost-effective manner. The company is actively engaged in a large-scale project to remediate a 400-hectare site on the Aspheron Peninsula in Azerbaijan. The site is currently regarded as the most polluted place in the world after a century of oil extraction with little regard for the surrounding environment. The Nopal Group will use its patented BioKonversion technology, which cleanses the soil of hydrocarbons in a two-part process using a large machine known as the Green Machine. Several pipelines will need to be relocated, and ancient drilling rigs that have been there as long as 100 years will have to be dealt with. The cleanup cost has been estimated at between $20 million to $40 million, and will take between 18 and 36 months, depending on how deep into the ground the machines have to dig for hydrocarbons. The 90-foot by 40-foot machine processes drill cuttings, contaminated soil and drill fluids by first separating the dirt from the liquid hydrocarbons, which can be recycled or refined for resale. The remaining dirt, which still contains 3 to 7 percent oil, is then placed into a centrifuge and mixed with a heating agent and other elements, including naturally oleophilic kenaf powder. The process micronizes and absorbs hydrocarbons. Once the process is finished, the hydrocarbons are immediately non-detectable and non-leachable. The leftover benign dirt can be used as landfill cover, or mixed with road aggregate. BioKonversion can also be adapted for use on oil rigs. This article demonstrated that the process has clear advantages over traditional oilfield remediation methods such as land farming. Opportunities exist to utilize the process in Venezuela and Kuwait. 1 fig.

  2. Coral reef bleaching: ecological perspectives

    Science.gov (United States)

    Glynn, P. W.

    1993-03-01

    Coral reef bleaching, the whitening of diverse invertebrate taxa, results from the loss of symbiotic zooxanthellae and/or a reduction in photosynthetic pigment concentrations in zooxanthellae residing within the gastrodermal tissues of host animals. Of particular concern are the consequences of bleaching of large numbers of reef-building scleractinian corals and hydrocorals. Published records of coral reef bleaching events from 1870 to the present suggest that the frequency (60 major events from 1979 to 1990), scale (co-occurrence in many coral reef regions and often over the bathymetric depth range of corals) and severity (>95% mortality in some areas) of recent bleaching disturbances are unprecedented in the scientific literature. The causes of small scale, isolated bleaching events can often be explained by particular stressors (e.g., temperature, salinity, light, sedimentation, aerial exposure and pollutants), but attempts to explain large scale bleaching events in terms of possible global change (e.g., greenhouse warming, increased UV radiation flux, deteriorating ecosystem health, or some combination of the above) have not been convincing. Attempts to relate the severity and extent of large scale coral reef bleaching events to particular causes have been hampered by a lack of (a) standardized methods to assess bleaching and (b) continuous, long-term data bases of environmental conditions over the periods of interest. An effort must be made to understand the impact of bleaching on the remainder of the reef community and the long-term effects on competition, predation, symbioses, bioerosion and substrate condition, all factors that can influence coral recruitment and reef recovery. If projected rates of sea warming are realized by mid to late AD 2000, i.e. a 2°C increase in high latitude coral seas, the upper thermal tolerance limits of many reef-building corals could be exceeded. Present evidence suggests that many corals would be unable to adapt

  3. Anaerobic co-digestion of cassava peels and manure: a technological approach for biogas generation and bio-fertilizer production

    International Nuclear Information System (INIS)

    Bayitse, R.; Laryea, G. N.; Selormey, G.; Oduro, W. O.; Aggey, M.; Mensah, B.; Gustavsson, M.; Bjerre, A.B.

    2014-01-01

    The modern global society faces great challenges in supply of energy and management of wastes in sustainable ways. One way of resolving the local challenges is to develop environmentally appropriate and socio economically viable biotechnological processes for converting biomass to energy. The general principles of anaerobic bio-digestion, digester design and features of bio-digestion are presented in the feature article, focusing on the prospects of utilizing cassava peels as a readily available lignocellulose feedstock for co-digestion with manure for the production of biogas and bio-fertilizer. Aside of the high cyanogenic properties, cassava peels would require pre-treatment before use as a substrate, hence, a multi-stage and high rate digestion system might be adopted in efficient digestion of cassava peels. To optimize carbon-nitrogen ratio for efficient digestion, cassava should be co-digested with manure. The socio-economic benefits of the anaerobic co-digestion technology and key policy measures to be implemented to harness bio-energy from agricultural wastes are also outlined. (au)

  4. Current perspectives of bio-ceramic technology in endodontics: calcium enriched mixture cement - review of its composition, properties and applications

    Science.gov (United States)

    Nawal, Ruchika Roongta; Talwar, Sangeeta; Verma, Mahesh

    2015-01-01

    Advancements in bio-ceramic technology has revolutionised endodontic material science by enhancing the treatment outcome for patients. This class of dental materials conciliates excellent biocompatibility with high osseoconductivity that render them ideal for endodontic care. Few recently introduced bio-ceramic materials have shown considerable clinical success over their early generations in terms of good handling characteristics. Calcium enriched mixture (CEM) cement, Endosequence sealer, and root repair materials, Biodentine and BioAggregate are the new classes of bio-ceramic materials. The aim of this literature review is to present investigations regarding properties and applications of CEM cement in endodontics. A review of the existing literature was performed by using electronic and hand searching methods for CEM cement from January 2006 to December 2013. CEM cement has a different chemical composition from that of mineral trioxide aggregate (MTA) but has similar clinical applications. It combines the biocompatibility of MTA with more efficient characteristics, such as significantly shorter setting time, good handling characteristics, no staining of tooth and effective seal against bacterial leakage. PMID:25671207

  5. Current perspectives of bio-ceramic technology in endodontics: calcium enriched mixture cement - review of its composition, properties and applications

    Directory of Open Access Journals (Sweden)

    Shivani Utneja

    2015-02-01

    Full Text Available Advancements in bio-ceramic technology has revolutionised endodontic material science by enhancing the treatment outcome for patients. This class of dental materials conciliates excellent biocompatibility with high osseoconductivity that render them ideal for endodontic care. Few recently introduced bio-ceramic materials have shown considerable clinical success over their early generations in terms of good handling characteristics. Calcium enriched mixture (CEM cement, Endosequence sealer, and root repair materials, Biodentine and BioAggregate are the new classes of bio-ceramic materials. The aim of this literature review is to present investigations regarding properties and applications of CEM cement in endodontics. A review of the existing literature was performed by using electronic and hand searching methods for CEM cement from January 2006 to December 2013. CEM cement has a different chemical composition from that of mineral trioxide aggregate (MTA but has similar clinical applications. It combines the biocompatibility of MTA with more efficient characteristics, such as significantly shorter setting time, good handling characteristics, no staining of tooth and effective seal against bacterial leakage.

  6. After the Biomedical Technology Revolution: Where to Now for a Bio-Psycho-Social Approach to Social Work?

    Science.gov (United States)

    Healy, Karen

    2016-07-01

    In the late twentieth century, the bio-psycho-social framework emerged as a powerful influence on the conceptualisation and delivery of health and rehabilitation services including social work services in these fields. The bio-psycho-social framework is built on a systems view of health and well-being ( Garland and Howard, 2009). The systems perspective encourages medical and allied health professions, including social work, to recognise and to respond to the multiple systems impacting on individual health and well-being ( Engel, 2003). This paper analyses how advances in biomedical technology, particularly in the fields of neuroscience and human genomics, are challenging the bio-psycho-social approach to practice. The paper examines the pressures on the social work profession to embrace biomedical science and points to the problems in doing so. The conclusion points to some tentative ways forward for social workers to engage critically with biomedical advances and to strengthen the bio-psycho-social framework in the interests of holistic and ethical approaches to social work practice.

  7. Research Extension and Education Programs on Bio-based Energy Technologies and Products

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, Sam [University of Tennessee, Knoxville, TN (United States). Tennessee Agricultural Experiment Station; Harper, David [University of Tennessee, Knoxville, TN (United States). Tennessee Agricultural Experiment Station; Womac, Al [University of Tennessee, Knoxville, TN (United States). Tennessee Agricultural Experiment Station

    2010-03-02

    The overall objectives of this project were to provide enhanced educational resources for the general public, educational and development opportunities for University faculty in the Southeast region, and enhance research knowledge concerning biomass preprocessing and deconstruction. All of these efforts combine to create a research and education program that enhances the biomass-based industries of the United States. This work was broken into five primary objective areas: • Task A - Technical research in the area of biomass preprocessing, analysis, and evaluation. • Tasks B&C - Technical research in the areas of Fluidized Beds for the Chemical Modification of Lignocellulosic Biomass and Biomass Deconstruction and Evaluation. • Task D - Analyses for the non-scientific community to provides a comprehensive analysis of the current state of biomass supply, demand, technologies, markets and policies; identify a set of feasible alternative paths for biomass industry development and quantify the impacts associated with alternative path. • Task E - Efforts to build research capacity and develop partnerships through faculty fellowships with DOE national labs The research and education programs conducted through this grant have led to three primary results. They include: • A better knowledge base related to and understanding of biomass deconstruction, through both mechanical size reduction and chemical processing • A better source of information related to biomass, bioenergy, and bioproducts for researchers and general public users through the BioWeb system. • Stronger research ties between land-grant universities and DOE National Labs through the faculty fellowship program. In addition to the scientific knowledge and resources developed, funding through this program produced a minimum of eleven (11) scientific publications and contributed to the research behind at least one patent.

  8. POM-assisted electrochemical delignification and bleaching of chemical pulp

    Science.gov (United States)

    Helene Laroche; Mohini Sain; Carl Houtman; Claude Daneault

    2001-01-01

    A polyoxometalate-catalyzed electrochemical process has shown good selectivity in delignifying pulp. This breakthrough in redox catalysis shows promise for the development of a new environmentally benign technology for pulp bleaching. The electrochemical process, applied with a mildly alkaline electrolyte solution containing trace amounts of a vanadium-based...

  9. Panorama 2011: New bio-fuel production technologies: overview of these expanding sectors and the challenges facing them

    International Nuclear Information System (INIS)

    Lorne, D.; Chabrelie, M.F.

    2011-01-01

    The numerous research programmes looking at new-generation biofuels that were initiated over the last ten years are now starting to bear fruit. Although no plants are producing and marketing biofuels yet, the large-scale, industrial feasibility of second-generation bio-fuel production at competitive cost may be demonstrated in the short-term. As far as third generation biofuels derived from algal biomass are concerned, there is a great deal of R and D interest in the sector, but the technology is still only in its infancy. (author)

  10. Converging micro-nano-bio technologies towards integrated biomedical systems: state of the art and future perspectives under the EU-information & communication technologies program.

    Science.gov (United States)

    Lymberis, A

    2008-01-01

    Research and development at the convergence of microelectronics, nano-materials, biochemistry, measurement technology and information technology is leading to a new class of biomedical systems and applications e.g. molecular imaging, point of care testing, gene therapy and bionics (including on and inside the body sensors and other miniaturised smart systems) which are expected to revolutionise the healthcare provision and quality of life. In particular they are expected to identify diseases at the earliest possible stage, intervene before symptomatic disease becomes apparent and monitor both the progress of the diseases and the effect of intervention and therapeutic procedures. The group of EC-funded projects on Micro-Nano-Bio Convergence Systems, "so-called" MNBS, is made by projects developing systems that use a vast array of technologies to integrate across traditional boundaries between the micro-nano-bio, and info worlds, enabling a wide range of applications from health care to food quality monitoring. It includes mainly two sub-groups, one dealing with systems for in vitro molecular diagnosis and biological/biochemical analysis and the other is dealing with systems for in vivo interaction with the human body. Current status of development and future challenges, technological and socioeconomic, are briefly presented in this paper as background introductory information to the mini-symposium on MNBS. Relevant examples of R&D within the group will be presented in the mini-symposium.

  11. Bio-patch design and implementation based on a low-power system-on-chip and paper-based inkjet printing technology.

    Science.gov (United States)

    Yang, Geng; Xie, Li; Mantysalo, Matti; Chen, Jian; Tenhunen, Hannu; Zheng, L R

    2012-11-01

    This paper presents the prototype implementation of a Bio-Patch using fully integrated low-power System-on-Chip (SoC) sensor and paper-based inkjet printing technology. The SoC sensor is featured with programmable gain and bandwidth to accommodate a variety of bio-signals. It is fabricated in a 0.18-ìm standard CMOS technology, with a total power consumption of 20 ìW from a 1.2 V supply. Both the electrodes and interconnections are implemented by printing conductive nano-particle inks on a flexible photo paper substrate using inkjet printing technology. A Bio-Patch prototype is developed by integrating the SoC sensor, a soft battery, printed electrodes and interconnections on a photo paper substrate. The Bio-Patch can work alone or operate along with other patches to establish a wired network for synchronous multiple-channel bio-signals recording. The measurement results show that electrocardiogram and electromyogram are successfully measured in in-vivo tests using the implemented Bio-Patch prototype.

  12. Optimization of Bleaching Parameters for Soybean Oil

    Directory of Open Access Journals (Sweden)

    Tomislav Domijan

    2012-01-01

    Full Text Available The final stage of edible soybean oil manufacture is refining, the most delicate phase of which is bleaching. At this step, undesirable substances are removed, such as pigments, traces of metals, phospholipids and certain degradation products. However, certain valuable compounds such as tocopherols and sterols may also be removed, significant loss of oxidative stability can occur, and fatty acid content may increase. To avoid these negative oil changes, bleaching parameters such as the concentration of bleaching clay, temperature and duration should be optimized. Since bleaching conditions depend on the properties of the bleaching clay as well as on the type of crude oil, bleaching parameters should be optimized with different types of clay for each vegetable oil. Since such optimization has not yet been reported for soybean oil treated with Pure-Flo® Supreme Pro-Active bleaching adsorbent, this study investigates the effect of bleaching parameters on bleaching efficiency, oxidative stability and the content and composition of bioactive compounds (tocopherols and sterols using the above mentioned clay in this type of oil. Results show that the amount of clay had the greatest influence on bleaching efficiency, especially according to the Lovibond scale, on transparency, and on phosphorus content. Temperature and clay amount significantly affected oxidative stability, in particular the formation of secondary oxidation products. Increasing the amount of clay decreased tocopherol content of the bleached oil. Neutralized soybean oil bleached for 20 min at 95 °C with 1 % Pure-Flo® Supreme Pro-Active bleaching clay showed the highest oxidative stability, best bleaching efficiency, and most favourable sterol content, although tocopherol content was reduced.

  13. Nano-Bio-Technology and Sensing Chips: New Systems for Detection in Personalized Therapies and Cell Biology

    Directory of Open Access Journals (Sweden)

    Sandro Carrara

    2010-01-01

    Full Text Available Further advances in molecular medicine and cell biology also require new electrochemical systems to detect disease biomarkers and therapeutic compounds. Microelectronic technology offers powerful circuits and systems to develop innovative and miniaturized biochips for sensing at the molecular level. However, microelectronic biochips proposed in the literature often do not show the right specificity, sensitivity, and reliability required by biomedical applications. Nanotechnology offers new materials and solutions to improve the surface properties of sensing probes. The aim of the present paper is to review the most recent progress in Nano-Bio-Technology in the area of the development of new electrochemical systems for molecular detection in personalized therapy and cell culture monitoring.

  14. 40 CFR 63.445 - Standards for the bleaching system.

    Science.gov (United States)

    2010-07-01

    ...) Bleaching systems bleaching pulp from kraft, sulfite, or soda pulping processes that use any chlorinated compounds; or (3) Bleaching systems bleaching pulp from mechanical pulping processes using wood or from any process using secondary or non-wood fibers, that use chlorine dioxide. (b) The equipment at each bleaching...

  15. Novas tecnologias reprodutivas conceptivas: bioética e controvérsias New reproductive conception technologies: bioethics and controversies

    Directory of Open Access Journals (Sweden)

    Marlene Tamanini

    2004-04-01

    Full Text Available Este artigo trata de alguns dos múltiplos aspectos éticos/bioéticos e de gênero no campo das novas tecnologias reprodutivas conceptivas (NTRc. A literatura nele apresentada aponta para a pluralidade de situações e abordagens possíveis em um campo multidimensional e controvertido. Explicita alguns princípios éticos/bioéticos do agir biomédico encontrados durante pesquisa com casais heterossexuais que fizeram reprodução assistida e com médic@s especialistas em reprodução humana no Sul do Brasil.1 Apresenta os pressupostos éticos/bioéticos sancionadores do agir médico e da continuidade dos chamados tratamentos para engravidar, e analisa os mecanismos utilizados para reerguer as expectativas dos casais em situação de desconfiança ou de insucesso.This article concerns some of the multiple ethical-bioethical and gender issues in the field of new reproductive and contraceptive technologies. The literature presented points to the plurality of possible situations and approaches in a multidimensional and controversial field. It presents some ethical-bioethical principals of biomedical action found in the study of heterosexual couples who use assisted reproduction. and of medical specialists in human reproduction in southern Brazil. It presents the ethical-bioethical presumptions that sanction medical behavior and the continuity of the so-called impregnation treatments, and analyzes the mechanisms used to raise the expectations of couples who lack confidence or success.

  16. Dentist-prescribed home bleaching: current status.

    Science.gov (United States)

    Dunn, J R

    1998-08-01

    White teeth have been an indicator of physical attractiveness throughout history. Only recently have we been able to whiten teeth with few side effects, making tooth bleaching a popular and effective dental treatment. The American Dental Association (ADA) has established guidelines on safety and effectiveness for tooth bleaching. External stains from aging or inherent dark color are more responsive to bleaching than internal stains. Dentist-prescribed home bleaching--including a careful dental exam, custom-fabricated trays, tacky high-viscosity gels, adequate instructions, and recall exams--has been shown to be an effective method for bleaching teeth. Trays can be worn overnight or during the day with similar effectiveness. The bleaching effect can last up to 3 years with more than 50% success.

  17. Thermochemical Conversion of Sugarcane Bagasse into Bio-Crude Oils by Fluidized-Bed Pyrolysis Technology

    Science.gov (United States)

    Islam, Mohammad Rofiqul; Haniu, Hiroyuki; Islam, Mohammad Nurul; Uddin, Md. Shazib

    Thermochemical conversion of sugarcane bagasse into bio-crude oils by fluidized-bed reactor has been taken into consideration in this study. The bagasse in particle form was pyrolyzed in an externally heated 7cm diameter and 37.5cm high fluidized-bed reactor with nitrogen as a carrier gas. The reactor chamber and gas-preheater were heated by means of a renewable energy biomass source cylindrical heater. At a reactor bed temperature of 450°C for a feed particle size of 420-600µm and at a gas flow rate of 30 l/min, an oil yield of 48wt% of dry feed was obtained. The pyrolysis process temperature was found to have influenced on the product yields. Characterization of the whole pyrolysis liquids obtained at optimum operating conditions has been carried out including physical properties, elemental analyses, GCV, FT-IR, and 1H NMR analysis. The results show that pyrolysis of sugarcane bagasse waste is a good option for producing bio-crude oils to be used as alternative to petroleum fuels and valuable chemical feedstocks.

  18. "Green technology": Bio-stimulation by an electric field for textile reactive dye contaminated agricultural soil.

    Science.gov (United States)

    Annamalai, Sivasankar; Santhanam, Manikandan; Selvaraj, Subbulakshmi; Sundaram, Maruthamuthu; Pandian, Kannan; Pazos, Marta

    2018-05-15

    The aim of the study is to degrade pollutants as well as to increase the fertility of agricultural soil by starch enhancing electrokinetic (EKA) and electro-bio-stimulation (EBS) processes. Starch solution was used as an anolyte and voltage gradient was about 0.5V/cm. The influence of bacterial mediated process was evaluated in real contaminated farming soil followed by pilot scale experiment. The in-situ formation of β-cyclodextrin from starch in the treatments had also influence on the significant removal of the pollutants from the farming soil. The conductivity of the soil was effectively reduced from 15.5dS/m to 1.5dS/m which corroborates well with the agricultural norms. The bio-stimulation was confirmed by the increase of the phosphorus content in the treated soil. Finally, phytotoxicity assays demonstrated the viability of the developed technique for soil remediation because plant germination percentage was higher in the treated soil in comparison to untreated soil. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Modeling chlorine dioxide bleaching of chemical pulp

    OpenAIRE

    Tarvo, Ville

    2010-01-01

    This doctoral thesis deals with the phenomenon-based modeling of pulp bleaching. Previous bleaching models typically utilize one or two empirical correlations to predict the kinetics in kappa number development. Empirical correlations are simple to develop, but their parameters are often tied to the validation system. A major benefit of physico-chemical phenomenon models is that they are valid regardless of the reaction environment. Furthermore, modeling the bleaching processes at molecular l...

  20. Complete genome sequencing of the luminescent bacterium, Vibrio qinghaiensis sp. Q67 using PacBio technology

    Science.gov (United States)

    Gong, Liang; Wu, Yu; Jian, Qijie; Yin, Chunxiao; Li, Taotao; Gupta, Vijai Kumar; Duan, Xuewu; Jiang, Yueming

    2018-01-01

    Vibrio qinghaiensis sp.-Q67 (Vqin-Q67) is a freshwater luminescent bacterium that continuously emits blue-green light (485 nm). The bacterium has been widely used for detecting toxic contaminants. Here, we report the complete genome sequence of Vqin-Q67, obtained using third-generation PacBio sequencing technology. Continuous long reads were attained from three PacBio sequencing runs and reads >500 bp with a quality value of >0.75 were merged together into a single dataset. This resultant highly-contiguous de novo assembly has no genome gaps, and comprises two chromosomes with substantial genetic information, including protein-coding genes, non-coding RNA, transposon and gene islands. Our dataset can be useful as a comparative genome for evolution and speciation studies, as well as for the analysis of protein-coding gene families, the pathogenicity of different Vibrio species in fish, the evolution of non-coding RNA and transposon, and the regulation of gene expression in relation to the bioluminescence of Vqin-Q67.

  1. Architecture for persistent surveillance using mast and UAS-based autonomous sensing with bio-inspired technologies

    Science.gov (United States)

    Burman, Jerry

    2014-06-01

    A sophisticated real time architecture for capturing relevant battlefield information of personnel and terrestrial events from a network of mast based imaging and unmanned aerial systems (UAS) with target detection, tracking, classification and visualization is presented. Persistent surveillance of personnel and vehicles is achieved using a unique spatial and temporally invariant motion detection and tracking algorithm for mast based cameras in combination with aerial remote sensing to autonomously monitor unattended ground based sensor networks. UAS autonomous routing is achieved using bio-inspired algorithms that mimic how bacteria locate nutrients in their environment. Results include field test data, performance and lessons learned. The technology also has application to detecting and tracking low observables (manned and UAS), counter MANPADS, airport bird detection and search and rescue operations.

  2. The innovations in science and technology as a demand for bio-better medicines in Europe.

    Science.gov (United States)

    Demetzos, Costas

    2015-01-01

    The purpose of this review is to address the role of the scientific excellence of innovative medicines as the key element in the development process in Greece. The collected statistical information and data on the absorbability of funds for research of innovative medicines, diagnostics, and advanced drug delivery systems pointed out that the Greek scientists could take advantage of the "Horizon 2020" on the continuity of their investigation, whilst how the accumulation of knowledge at Greek universities and research foundations could be translated into industrial products with added value, safe and effective for the European consumers. In conclusion, this review also is considered to provide the potential benefits in order to adapt the signaling of the "Horizon 2020" for the development of a bio-better Europe based on scientific inspirations. This approach could be considered as an interplay between countries and even between the north and west located countries in the European landscape.

  3. FY 1997 report on the research study on the effect of the active use of bio-technology on energy and social systems; 1997 nendo chosa hokokusho (bio-technology no katsuyo ni yoru energy shakai system ni oyobosu koka no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For construction of a sustainable society by active use of bio-technology, a research study was made on the current state of active use of bio-technology for every industrial or social field, and the basic recognition and orientation for practice and diffusion of bio-technology. The previous typical examples of the effect of bio-technology on energy and social systems were evaluated from not only an affirmative viewpoint but also a compensatory viewpoint. Based on these examples, promising features of bio-technology and measures for active use of such features were showed for the future energy and social systems from a technological viewpoint. As a scenario for sustainable development of a society, some approaches and values about collection of rare resources, agriculture based on mass circulation, and recurrence to high-protein traditional foods such as fermented food were showed for balanced development of environment, population, and resources including energy and food. 8 refs., 14 figs., 8 tabs.

  4. Extended Abstracts from BioGeo99: Applications of Geospatial Technology to Biological Sciences

    National Research Council Canada - National Science Library

    Handley, Lawrence

    2000-01-01

    ... of Global Positioning System (GPS), aquatic and terrestrial telemetry, national classification systems, remote sensing, metadata, and other geospatial technologies used in biological science applications...

  5. THE BLEACHING SYNDROME: MANIFESTATION OF A POST ...

    African Journals Online (AJOL)

    User

    exception, Western ideals are an environmental force that disrupts the well-being of African descended women in particular, resulting in the Bleaching Syndrome. Although the literature acknowledges racism among the list of colonial pathologies, amidst idealization of light skin neglect of the Bleaching Syndrome has been ...

  6. Use of xylanase in the TCF bleaching of eucalyptus kraft pulp

    Energy Technology Data Exchange (ETDEWEB)

    Roncero, B.; Vidal, T.; Torres, A.L.; Colom, J.F. [Universitat Politecnia de Catalunya, Terrassa (Spain)

    1996-10-01

    Environmental pressures are forcing the pulp and paper industry to develop new technologies that reduce or eliminate the presence of various contaminants in bleaching plant effluents. Oxygen delignification techniques, replacement of elemental chlorine with chlorine dioxide, ozone, hydrogen peroxide and new agents as well as the use of xylanase enzymes for biobleaching, reduce o eliminate the production of chlorinated organic substances. This paper compares the sequence XOZP with OZP in the bleaching of Eucalyptus globulus kraft pulps. It has been studied the influence of enzymatic treatment on the consumption of bleaching agents: ozone and hydrogen peroxide. Chemical, physical, optical and refining properties of pulps, as well as COD and colour of effluent are also studied. The xylanase treatment is positive and it is possible to manufacture fully bleached pulps at high brightness and viscosity without using chlorine compounds at a low ozone and hydrogen peroxide consumption.

  7. Microhardness of demineralized enamel following home bleaching and laser-assisted in office bleaching

    Science.gov (United States)

    Ghanbarzadeh, Majid; Akbari, Majid; Hamzei, Haniye

    2015-01-01

    Background There is little data regarding the effect of tooth whitening on microhardness of white spot lesions. This study was conducted to investigate the effect of home-bleaching and laser-assisted in-office bleaching on microhardness of demineralized enamel. Material and Methods Forty bovine incisors were selected and immersed in a demineralizing solution for 12 weeks to induce white spot lesions. Enamel blocks were prepared and randomly assigned to two groups of 20 each. The first group underwent home bleaching with 15% carbamide peroxide which was applied for 8 hours a day over a period of 15 days. In the second group, in-office bleaching was performed by 40% hydrogen peroxide and powered by irradiation from an 810 nm gallium-aluminum-arsenide (GaAlAs) diode laser (CW, 2W). This process was performed for 3 sessions every seven days, in 15 days. The specimens were stored in Fusayama Meyer artificial saliva during the experiment. Surface microhardness was assessed before and after the bleaching therapies in both groups. Results Microhardness decreased significantly following both home bleaching and laser-assisted in-office bleaching (p<0.05). There were no significant differences in hardness values among the two groups either before (p=0.131) or after (p=0.182) the bleaching procedures. Conclusions Tooth whitening through home bleaching or laser-assisted in-office bleaching can result in a significant reduction in microhardness of white spot lesions. Therefore, it is suggested to take protective measures on bleached demineralized enamel. Key words:White spot lesion, bleaching, laser, microhardness, demineralized enamel, home bleaching, in-office bleaching. PMID:26330939

  8. The tubercles on humpback whales' flippers: application of bio-inspired technology.

    Science.gov (United States)

    Fish, Frank E; Weber, Paul W; Murray, Mark M; Howle, Laurens E

    2011-07-01

    The humpback whale (Megaptera novaeangliae) is exceptional among the large baleen whales in its ability to undertake aquabatic maneuvers to catch prey. Humpback whales utilize extremely mobile, wing-like flippers for banking and turning. Large rounded tubercles along the leading edge of the flipper are morphological structures that are unique in nature. The tubercles on the leading edge act as passive-flow control devices that improve performance and maneuverability of the flipper. Experimental analysis of finite wing models has demonstrated that the presence of tubercles produces a delay in the angle of attack until stall, thereby increasing maximum lift and decreasing drag. Possible fluid-dynamic mechanisms for improved performance include delay of stall through generation of a vortex and modification of the boundary layer, and increase in effective span by reduction of both spanwise flow and strength of the tip vortex. The tubercles provide a bio-inspired design that has commercial viability for wing-like structures. Control of passive flow has the advantages of eliminating complex, costly, high-maintenance, and heavy control mechanisms, while improving performance for lifting bodies in air and water. The tubercles on the leading edge can be applied to the design of watercraft, aircraft, ventilation fans, and windmills.

  9. BLEACHING IN VITAL TEETH: A LITERARY REVIEW

    Directory of Open Access Journals (Sweden)

    Felipe Fagundes Soares

    2007-12-01

    Full Text Available Tooth bleaching technique has presented a significant evolution, promoting higher satisfaction and comfort to the patients. Therefore, the aim of this study was to present the bleaching agents and the techniques, discussing advantages and disadvantages of each one, and the effect of these agents in the oral environment. The main agents used in the bleaching technique are the hydrogen peroxide and the carbamide peroxide, promoting the bleaching effect through oxidation of organic compounds. The application of these agents can be made at home or at a doctor office. During treatment, it may occur some adverse effects, such as tooth sensibility, increasing of dental porosity, and some interactions with the restorative material. However, these adverse effects can be eliminated or controlled when the treatment is executed under professional orientation. When the bleaching technique is well indicated and correctly conducted, it is associated with significantly positive results.

  10. Total factor productivity and Bio Economy effects

    OpenAIRE

    Zuniga Gonzalez, Carlos Alberto

    2012-01-01

    This paper develops a new measure of total factor productivity growth in agricultural Production which incorporates Bio Economic components effects.The new measure is called the Bio Economic-Oriented Total Factor Productivity (BTFP) index, and incorporates components of Bio Economic as liquid biofuels. BTFP measure changes in Bio Economic efficiency and can be decomposed into bio economy efficiency change (BEC), and Bio Economic technological change (BTC) components.An empirical analysis, inv...

  11. A Multi-scale, Multi-disciplinary Approach for Assessing the Technological, Economic, and Environmental Performance of Bio-based Chemicals

    DEFF Research Database (Denmark)

    Herrgard, Markus; Sukumara, Sumesh; Campodonico Alt, Miguel Angel

    2015-01-01

    In recent years, bio-based chemicals have gained interest as a renewable alternative to petrochemicals. However, there is a significant need to assess the technological, biological, economic and environmental feasibility of bio-based chemicals, particularly during the early research phase. Recently...... and the de novo prediction of metabolic pathways connecting existing host metabolism to desirable chemical products. This multiscale, multi-disciplinary framework for quantitative assessment of bio-based chemicals will play a vital role in supporting engineering, strategy and policy decisions as we progress......, the Multi-scale framework for Sustainable Industrial Chemicals (MuSIC) was introduced to address this issue by integrating modelling approaches at different scales ranging from cellular to ecological scales. This framework can be further extended by incorporating modelling of the petrochemical value chain...

  12. Biomedical informatics and the convergence of Nano-Bio-Info-Cogno (NBIC) technologies.

    Science.gov (United States)

    Martin-Sanchez, F; Maojo, V

    2009-01-01

    To analyze the role that biomedical informatics could play in the application of the NBIC Converging Technologies in the medical field and raise awareness of these new areas throughout the Biomedical Informatics community. Review of the literature and analysis of the reference documents in this domain from the biomedical informatics perspective. Detailing existing developments showing that partial convergence of technologies have already yielded relevant results in biomedicine (such as bioinformatics or biochips). Input from current projects in which the authors are involved is also used. Information processing is a key issue in enabling the convergence of NBIC technologies. Researchers in biomedical informatics are in a privileged position to participate and actively develop this new scientific direction. The experience of biomedical informaticians in five decades of research in the medical area and their involvement in the completion of the Human and other genome projects will help them participate in a similar role for the development of applications of converging technologies -particularly in nanomedicine. The proposed convergence will bring bridges between traditional disciplines. Particular attention should be placed on the ethical, legal, and social issues raised by the NBIC convergence. These technologies provide new directions for research and education in Biomedical Informatics placing a greater emphasis in multidisciplinary approaches.

  13. The Tubercles on Humpback Whales’ Flippers: Application of Bio-Inspired Technology

    Science.gov (United States)

    2011-05-01

    advances of technology in marine systems: what does biomimetics have to offer to aquatic robots? Appl Bionics Biomech 3:49–60. Fish FE. 2009. Biomimetics...Effects of swimming path curvature on the energetics of fish swimming. Fish Bull 79:171–6. Weihs D. 1993. Stability of aquatic animal locomotion

  14. Functional properties of bio-inspired surfaces: characterization and technological applications

    National Research Council Canada - National Science Library

    Favret, Eduardo A; Fuentes, Néstor O

    2009-01-01

    ... technological materials. It analyses how such surfaces can be described and characterized using microscopic techniques and thus reproduced, encompassing the important areas of current surface replication techniques and the associated acquisition of good master structures. It is well known that biological systems have the ability to sense, ...

  15. Development of Ethical Bio-Technology Assessment Tools for Agriculture and Food Production

    NARCIS (Netherlands)

    Beekman, V.

    2005-01-01

    The objective of this project is to develop and improve tools for the ethical assessment of new technologies in agriculture and food production in general and modern biotechnologies in particular. The project thus responds to the plurality of consumer concerns that increasingly inform the European

  16. Cellulose fibers: bio- and nano-polymer composites ; green chemistry and technology

    National Research Council Canada - National Science Library

    Kalia, Susheel; Kaith, B. S; Inderjeet Kaur

    2011-01-01

    ... on eco-friendly materials, and the steps taken in this direction will lead toward GreenScience and Green-Technology. Cellulosics account for about half of the dry weight of plant biomass and approximately half of the dry weight of secondary sources of waste biomass. At this crucial moment, cellulose fibers are pushed due to their "gr...

  17. [Assessment of tooth bleaching efficacy with spectrophotometer].

    Science.gov (United States)

    Zhu, Wenhao; Liu, Chang; Pan, Jie

    2014-06-01

    To analyze the changes in CIE L*, a*, and b* at cervical, body, and incisal sites after tooth bleaching by using a spectrophotometer. Sixty-seven intact and healthy maxillary central incisors were in-vestigated. These incisors were darker than A3 according to the Vita Classical shade guide. The CIE tooth shade parameters L*, a*, and b* were simultaneously recorded at three tooth areas (cervical, body, and incisal) with a spectrophotometer before and after tooth bleaching (35%H2O2 coordinating with Beyond whitening accelerator irradiating). The shade dif-ferential (DeltaE) was calculated. ANOVA, paired t-test, and Pearson correlation analysis were used for data analysis. The efficacy rates of tooth bleaching were satisfactory, with 86.6%, 86.6%, and 85.1% in the cervical, body, and incisal sites, respectively. The average values of DeltaE were 5.09, 4.44, and 4.40 in the cervical, body, and incisal sites. Tooth bleaching significantly increased L* and significantly decreased a* and b* in all tooth areas (P spectrophotometer could objectively evaluate the whitening effect of tooth bleaching at the different tooth sites. The tooth bleaching system (35%H202 coordinating with Beyond whitening accelerator irradiating) exerts powerful bleaching actions in most of the tooth areas investigated. The order of tooth bleaching effectiveness is cervicalbody>incisal. Yellow coloration is decreased mainly at the cervical site, and brightness was increased mostly at theincisal site. The effectiveness of tooth bleaching increases as the baseline b* value increases.

  18. Smart nanosystems: Bio-inspired technologies that interact with the host environment.

    Science.gov (United States)

    Kwon, Ester J; Lo, Justin H; Bhatia, Sangeeta N

    2015-11-24

    Nanoparticle technologies intended for human administration must be designed to interact with, and ideally leverage, a living host environment. Here, we describe smart nanosystems classified in two categories: (i) those that sense the host environment and respond and (ii) those that first prime the host environment to interact with engineered nanoparticles. Smart nanosystems have the potential to produce personalized diagnostic and therapeutic schema by using the local environment to drive material behavior and ultimately improve human health.

  19. Negative pressure wound therapy with Bio-Dome dressing technology in the treatment of complex wounds: a case series.

    Science.gov (United States)

    Penny, H L; Spinazzola, J; Green, A; Rifkah, M; Faretta, M; Youshaw, D; Weaver, A; Zaki, P

    2014-04-01

    The treatment of complex wounds is difficult and not always effective. Various treatment options are used with varying degrees of success. Negative pressure wound therapy (NPWT) is a cost-efficient and effective way to help treat these wounds. The use of a vacuum device applies the negative pressure to the site of the wound and promotes waste removal and increases circulation and tissue formation. While various NPWT systems are currently on the market, we utilised the ConvaTec Engenex® system with Bio-DomeTM technology; however, our case study is not intended to advocate the specific use of this system, but instead focuses on the use of NPWT as a viable option for wound healing. Each of the following case study patients presented with difficult-to-heal wounds that failed traditional therapeutic approaches. Through the use of NPWT, our patients saw major wound size reductions. Each patient exhibited at least a 94% reduction in wound area, wound volume or both.

  20. Bio-Technological Characterization of the Saccharomyces bayanus Yeast Strains in Order to Preserve the Local Specificity

    Directory of Open Access Journals (Sweden)

    Enikő Gaspar

    2011-05-01

    Full Text Available The wine yeasts have multiple and important applications in the industry, aiming to obtain pure cultures and the selection of those strains which, according to the lab investigations, present superior bio-technological properties. In this study we monitored three types of Saccharomyces bayanus yeast strains, isolated from indigenous grapes varieties, Apold Iordana, Italian Blaj Riesling and Royal Feteasca from Jidvei area, which are present in the collection of the Biotechnologies and Microbiology Research Center of SAIAPM University. The yeast strains were subject to alcoholic fermentation in malt must at different temperatures, in the presence of alcohol, sugar and SO2 in various concentrations. The obtained results led to selecting of those strains which had best results regarding the alcoholic tolerance, osmo-tolerance, fermentation speed under stress conditions and resistance to SO2. These results can have practical applications in using the indigenous strains, isolated from grapes which are from inside the country, so that we preserve the local specificity, and reduce imports regarding this area.

  1. Treatment of synthetic wastewater and hog waste with reduced sludge generation by the multi-environment BioCAST technology.

    Science.gov (United States)

    Yerushalmi, L; Alimahmoodi, M; Mulligan, C N

    2013-01-01

    Simultaneous removal of carbon, nitrogen and phosphorus was examined along with reduced generation of biological sludge during the treatment of synthetic wastewater and hog waste by the BioCAST technology. This new multi-environment wastewater treatment technology contains both suspended and immobilized microorganisms, and benefits from the presence of aerobic, microaerophilic, anoxic and anaerobic conditions for the biological treatment of wastewater. The influent concentrations during the treatment of synthetic wastewater were 1,300-4,000 mg chemical oxygen demand (COD)/L, 42-115 mg total nitrogen (TN)/L, and 19-40 mg total phosphorus (TP)/L. The removal efficiencies reached 98.9, 98.3 and 94.1%, respectively, for carbon, TN and TP during 225 days of operation. The removal efficiencies of carbon and nitrogen showed a minimal dependence on the nitrogen-to-phosphorus (N/P) ratio, while the phosphorus removal efficiency showed a remarkable dependence on this parameter, increasing from 45 to 94.1% upon the increase of N/P ratio from 3 to 4.5. The increase of TN loading rate had a minimal impact on COD removal rate which remained around 1.7 kg/m(3) d, while it contributed to increased TP removal efficiency. The treatment of hog waste with influent COD, TN and TP concentrations of 960-2,400, 143-235 and 25-57 mg/L, respectively, produced removal efficiencies up to 89.2, 69.2 and 47.6% for the three contaminants, despite the inhibitory effects of this waste towards biological activity. The treatment system produced low biomass yields with average values of 3.7 and 8.2% during the treatment of synthetic wastewater and hog waste, respectively.

  2. Can marine cloud brightening reduce coral bleaching?

    OpenAIRE

    Latham, J; Kleypas, J; Hauser, R; Parkes, B; Gadian, A

    2013-01-01

    Increases in coral bleaching events over the last few decades have been largely caused by rising sea surface temperatures (SST), and continued warming is expected to cause even greater increases through this century. We use a Global Climate Model to examine the potential of marine cloud brightening (MCB) to cool oceanic surface waters in three coral reef provinces. Our simulations indicate that under doubled CO conditions, the substantial increases in coral bleaching conditions from current v...

  3. Alternative bleaching methods for Cheddar cheese whey.

    Science.gov (United States)

    Kang, E J; Smith, T J; Drake, M A

    2012-07-01

    Residual annatto colorant (norbixin) in fluid Cheddar cheese whey can be bleached. The 2 approved chemical bleaching agents for whey, hydrogen peroxide (HP) and benzoyl peroxide (BP), negatively impact the flavor of dried whey protein. The objective of this study was to evaluate alternative methods for bleaching liquid whey: ultraviolet radiation (UV), acid-activated bentonite (BT), and ozone (OZ). Colored Cheddar cheese whey was manufactured followed by pasteurization and fat separation. Liquid whey was subjected to one of 5 treatments: control (CT) (no bleaching; 50 °C, 1 h), HP (250 mg/kg; 50 °C, 1 h), UV (1 min exposure; 50 °C), BT (0.5% w/w; 50 °C, 1 h), or OZ (2.2g/h, 50 °C, 1 h). The treated whey was then ultrafiltered, diafiltered, and spray-dried to 80% whey protein concentrate (WPC80). The entire experiment was replicated 3 times. Color (norbixin extraction and measurement), descriptive sensory, and instrumental volatile analyses were conducted on WPC80. Norbixin elimination was 28%, 79%, 39%, and 15% for HP, BT, UV, and OZ treatments, respectively. WPC80 from bleached whey, regardless of bleaching agent, had lower sweet aromatic and cooked/milky flavors compared to unbleached CT (P < 0.05). The HP and BT WPC80 had higher fatty flavor compared to the CT WPC80 (P < 0.05), and the UV and OZ WPC80 had distinct mushroom/burnt and animal flavors. Volatile compound results were consistent with sensory results and confirmed higher relative abundances of volatile aldehydes in UV, HP, and OZ WPC80 compared to CT and BT WPC80. Based on bleaching efficacy and flavor, BT may be an alternative to chemical bleaching of fluid whey. The 2 approved chemical bleaching agents for whey, hydrogen peroxide (HP) and benzoyl peroxide (BP), negatively impact flavor of dried whey protein, and restrictions on these agents are increasing. This study evaluated 3 alternatives to chemical bleaching of fluid whey: UV radiation, ozone, and bentonite. © 2012 Institute of Food

  4. Highly sensitive detection of human IgG using a novel bio-barcode assay combined with DNA chip technology

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhenbao [Central South University, School of Pharmaceutical Sciences (China); Zhou, Bo, E-mail: zhoubo1771@163.com [The Affiliated Zhongda Hospital of Southeast University, Department of Gerontology (China); Wang, Haiqing; Lu, Feng; Liu, Tianjun; Song, Cunxian; Leng, Xigang, E-mail: lengxigyky@163.com [Institute of Biomedical Engineering, Chinese Academy of Medical Sciences and Peking Union Medical College (China)

    2013-09-15

    A simple and ultrasensitive detection of human IgG based on signal amplification using a novel bio-barcode assay and DNA chip technology was developed. The sensing platform was a sandwich system made up of antibody-modified magnetic microparticles (Ab-MMPs)/human IgG/Cy3-labeled single-stranded DNA and antibody-modified gold nanoparticles (Cy3-ssDNA-Ab-AuNPs). The MMPs (2.5 {mu}m in diameter) modified with mouse anti-human IgG monoclonal-antibodies could capture human IgG and further be separated and enriched via a magnetic field. The AuNPs (13 nm in diameter) conjugated with goat anti-human IgG polyclonal-antibodies and Cy3-ssDNA could further combine with the human IgG/Ab-MMP complex. The Cy3-ssDNA on AuNPs was then released by TCEP to hybridize with the DNA chip, thus generating a detectable signal by the fluorescence intensity of Cy3. In order to improve detection sensitivity, a three-level cascaded signal amplification was developed: (1) The MMP enrichment as the first-level; (2) Large quantities of Cy3-ssDNA on AuNPs as the second-level; (3) The Cy3-ssDNA conjugate with DNA chip as the third-level. The highly sensitive technique showed an increased response of the fluorescence intensity to the increased concentration of human IgG through a detection range from 1 pg mL{sup -1} to 10 ng mL{sup -1}. This sensing technique could not only improve the detection sensitivity for the low concentration of human IgG but also present a robust and efficient signal amplification model. The detection method has good stability, specificity, and reproducibility and could be applied in the detection of human IgG in the real samples.

  5. Assessment of the process of cottonseed oil bleaching in hexane

    Directory of Open Access Journals (Sweden)

    Megahed, Ola A.

    2002-12-01

    Full Text Available This work has been initiated to assess the feasibility of bleaching cottonseed oil in miscella as a processing step next to alkali refining in miscella. Alkali refining of cottonseed oil in miscella has several advantages over conventional refining technologies with respect to oil quality, oil losses and process cost. Therefore, the process efficiency of the bleaching of cottonseed oil in presence of hexane (at a volumetric ratio of 1:1, has been studied and compared to that without solvent. The process efficiency has been evaluated according to the decolourization capacity, the oil losses on spent earth, the filtration rate of the oil from the clay and the acidity of the bleached oil as well as its peroxide content. The bleaching in presence of hexane was carried out at 25ºC whereas that by conventional bleaching at 110ºC. Different clay loads were used in each of the two bleaching techniques and the colour indices of the oils before and after bleaching determined in each case. The results were used to predict Freundlich adsorption equations for the oil pigments in both cases. These equations were then used to predict the colour of the oils obtained by bleaching of refined oils of different grades. The results have shown that oil decolourization is more efficient in presence of solvent when the starting oil is of an acceptable grade and the reverse is true for low grade oils. Also, the possibility of oil oxidation during bleaching is less in presence of solvent. Moreover, the bleaching in miscella has proved two other additional advantages over conventional bleaching. The filtration of oil from clay is much faster in miscella bleaching and the oil losses on spent earth is lower. This will be reflected on the overall process economy.Este trabajo ha sido iniciado para evaluar la viabilidad de la decoloración del aceite de semilla de algodón en miscela como un paso de procesado próximo a la refinación alcalina en miscela. La refinaci

  6. Temperament and perception of tooth bleaching results

    Directory of Open Access Journals (Sweden)

    Katarzyna Mehr

    2016-09-01

    Full Text Available Background . The neurophysiological process of perceiving the results of tooth bleaching requires the correct interaction between the central nervous system and the organs of sight. Exaggerated beliefs concerning defective facial features may enhance inner attitudes about one’s own color of dentition, as well as a feeling of dissatisfaction with the degree of leaching. Objectives. The study aimed to assess the degree of the patient satisfaction with the results of tooth bleaching in relation to their temperament. Material and methods. There were 68 generally healthy volunteers, aged 28–38 years, with external discolorations of the teeth. They had never undergone dental bleaching and their frontal teeth did not have any fillings. After clinical evaluation and the completion of formalities, the patients were asked to fill in Strelau’s temperament questionnaire. Questionnaires and visual status were assessed three times by three doctors: before bleaching, and then 24 hours and two weeks after the home-bleaching operation, which was done with the use of Opalescence (Ultradent in uniform sequence. Results . There were practically no adverse side results, except a periodic dentin hypersensitivity that occurred periodically in 44 patients. The results of the visual assessment performed by the physicians did not differ. The questionnaire data showed that women were more critical of the results in relation to the expectations. Among elancholics, full satisfaction was declared by 41%, whereas among sanguine people, full satisfaction was obtained by 85%. Satisfaction with the aesthetic results was associated with bleaching by at least 4 degrees. Conclusions . Patients’ temperament affects their subjective evaluation of the effectiveness of tooth bleaching, which should be taken into consideration in the patient’s individual dental treatment plan.

  7. Combined Bleaching Technique Using Low and High Hydrogen Peroxide In-Office Bleaching Gel.

    Science.gov (United States)

    Rezende, M; Ferri, L; Kossatz, S; Loguercio, A D; Reis, A

    2016-01-01

    The aim of this study was to evaluate the efficacy, color stability, risk, and intensity of tooth sensitivity (TS) of combined bleaching techniques performed with 20% or 35% hydrogen peroxide for an in-office protocol. Thirty patients were randomly divided into two groups and submitted to a single 45-minute in-office bleaching session with 35% hydrogen peroxide or 20% hydrogen peroxide. At-home bleaching was performed with 10% carbamide peroxide for two hours daily over the course of two weeks. The color was evaluated with the value-oriented shade guide Vita Classical at different periods up to 12 months after bleaching. Patients recorded the intensity of TS using a five-point verbal scale. Color change data were submitted to a two-way repeated-measures analysis of variance and Tukey test (α=0.05). The absolute risk and intensity of TS were compared with the Fisher exact test and Mann-Whitney test, respectively (α=0.05). On average, an effective and similar whitening of three units in shade guide was observed for both groups, which remained stable for 12 months. When both protocols were compared, the one with hydrogen peroxide 35% showed a higher risk (p=0.02) and intensity of TS (p=0.04). In regard to the TS intensity, no significant difference was observed up to 48 hours after in-office bleaching (p=0.09) and during the at-home bleaching phase of the study (p=0.71). The combined bleaching technique using at-home bleaching associated with in-office bleaching was effective and stable over the course of 12 months, regardless of the concentration of the hydrogen peroxide used for in-office bleaching. However, the protocol with 20% hydrogen peroxide produced lower risk and intensity of TS.

  8. 2010 World bio-energy conference

    International Nuclear Information System (INIS)

    2010-01-01

    After having evoked the bio-energy price awarded to a Brazilian for his works on the use of eucalyptus as energy source, this report proposes a synthesis of the highlights of the conference: discussions about sustainability, bio-energies as an opportunity for developing countries, the success of bio-energies in Sweden, and more particularly some technological advances in the field of biofuels: a bio-LPG by Biofuel-solution AB, catalysis, bio-diesel from different products in a Swedish farm, a second generation ethanol by the Danish company Inbicon, a large scale methanization in Goteborg, a bio-refinery concept in Sweden, bio-gases

  9. Comparison between traditional and laser bleaching treatment

    Science.gov (United States)

    Cesar, Ilene C. R.; Redigolo, Marcela L.; Liporoni, Priscila C. S.; Munin, Egberto

    2001-10-01

    Fifteen human embedded third molars were used in this in vitro study to evaluate the effects of two bleaching products associated or not with Argon laser application. The samples received a cervical-apical cut and were longitudinally cut into 4 parts resulting in 75 specimens. These parts were divided at random into 5 groups and submitted to the traditional power bleaching procedure for enamel. Group 1 was separated as a control group. Group 2 was exposed to 37 % carbamide peroxide bleaching solution and developed with an Argon laser application. The same solution was used in Group 3 but the bleaching was developed with an halogen lamp irradiation. 35 % carbamide peroxide were used in Groups 4 and 5. One was developed as Group 2 and the other as Group 3. The samples were analyzed under a photoreflectance experiment. We observed that Group 2 presented more white spectra than Group 3. However, Groups 4 and 5 showed the same results independent of the use of the laser or the halogen lamp for the light curing. Comparing both bleaching products, the 35 % carbamide peroxide was more efficient on its purposes than the other one.

  10. A Chemical Approach to Mitigate Coral Bleaching

    Science.gov (United States)

    Marty-Rivera, M.; Yudowski, G.

    2016-02-01

    Changes in sea surface temperature and irradiance can induce bleaching and increase mortality in corals. Coral bleaching occurs when symbiotic algae living inside the coral is degraded or expelled, reducing the availability of energetic resources. Oxidative stress has been suggested as a possible molecular mechanism triggering bleaching. We hypothesized that reduction of reactive oxygen species (ROS) during stress could mitigate or prevent coral bleaching. We utilized the coral Porites Astreoides as our model to test the effects of two natural antioxidants, catechin and Resveratrol, on thermally induced bleaching. Coral fragments were exposed to four treatments: high temperature (32°C), high temperature plus antioxidants (1μM), ambient temperature (25°C), or ambient temperature (25°C) plus antioxidant for four days. A total of 8 corals were used per treatment. We measured several photobiological parameters, such as maximum quantum yield and light curves to assess the viability of symbiodinium spp. after thermal stress in the presence of antioxidants. Preliminary experiments on a model species, the sea anemone Aiptasia pallida and corals, showed that exposure to antioxidants reduced intracellular levels of ROS. Additionally, antioxidant-treated anemones showed higher photosynthetic efficiency (67%) than those exposed to high-temperature alone.

  11. Nanoparticle based bio-bar code technology for trace analysis of aflatoxin B1 in Chinese herbs.

    Science.gov (United States)

    Yu, Yu-Yan; Chen, Yuan-Yuan; Gao, Xuan; Liu, Yuan-Yuan; Zhang, Hong-Yan; Wang, Tong-Ying

    2018-04-01

    A novel and sensitive assay for aflatoxin B1 (AFB1) detection has been developed by using bio-bar code assay (BCA). The method that relies on polyclonal antibodies encoded with DNA modified gold nanoparticle (NP) and monoclonal antibodies modified magnetic microparticle (MMP), and subsequent detection of amplified target in the form of bio-bar code using a fluorescent quantitative polymerase chain reaction (FQ-PCR) detection method. First, NP probes encoded with DNA that was unique to AFB1, MMP probes with monoclonal antibodies that bind AFB1 specifically were prepared. Then, the MMP-AFB1-NP sandwich compounds were acquired, dehybridization of the oligonucleotides on the nanoparticle surface allows the determination of the presence of AFB1 by identifying the oligonucleotide sequence released from the NP through FQ-PCR detection. The bio-bar code techniques system for detecting AFB1 was established, and the sensitivity limit was about 10 -8  ng/mL, comparable ELISA assays for detecting the same target, it showed that we can detect AFB1 at low attomolar levels with the bio-bar-code amplification approach. This is also the first demonstration of a bio-bar code type assay for the detection of AFB1 in Chinese herbs. Copyright © 2017. Published by Elsevier B.V.

  12. Bio-technologies; Biotechnologies

    Energy Technology Data Exchange (ETDEWEB)

    Grawitz, X. [Systemes Bio-Industries, 92 - Boulogne Billancourt (France)

    1997-12-31

    The impact of the French 2910 decree concerning pollution emission (emission levels of boilers, turbines, engines and dryers) on the calculation of chimney stack height, gas ejection minimum speed and influence of obstacles, is reviewed. The energy efficiency improvement of 400 kW to 50 MW boilers and the implementation of a cogeneration plant are also described

  13. Bio-fuels

    International Nuclear Information System (INIS)

    2008-01-01

    This report presents an overview of the technologies which are currently used or presently developed for the production of bio-fuels in Europe and more particularly in France. After a brief history of this production since the beginning of the 20. century, the authors describe the support to agriculture and the influence of the Common Agricultural Policy, outline the influence of the present context of struggle against the greenhouse effect, and present the European legislative context. Data on the bio-fuels consumption in the European Union in 2006 are discussed. An overview of the evolution of the activity related to bio-fuels in France, indicating the locations of ethanol and bio-diesel production facilities, and the evolution of bio-fuel consumption, is given. The German situation is briefly presented. Production of ethanol by fermentation, the manufacturing of ETBE, the bio-diesel production from vegetable oils are discussed. Second generation bio-fuels are then presented (cellulose enzymatic processing), together with studies on thermochemical processes and available biomass resources

  14. New technology of bio-heap leaching uranium ore and its industrial application in Ganzhou uranium mine

    International Nuclear Information System (INIS)

    Fan Baotuan; Meng Yunsheng; Liu Jian; Meng Jin; Li Weicai; Xiao Jinfeng; Chen Sencai; Du Yuhai; Huang Bin

    2006-10-01

    Bioleaching mechanism of uranium ore is discussed. Incubation and selection of new strain, biomembrane oxidizing tank--a kind of new equipment for bacteria culture and oxidation regeneration of leaching agent are also introduced. The results of industrial experiment and industrial production are summarized. Compared with conventional heap leaching, bioleaching period and acid amount are reduced, oxidant and leaching agent are saved, and uranium concentration in leaching solution is increased. It is the first time to realize industrial production by bio-heap leaching in Chinese uranium mine. New equipment-biomembrane oxidizing tank give the basis of bio-heap leaching industrial application. Bio-heap leaching process is an effective technique to reform technique of uranium mine and extract massive low-content uranium ore in China. (authors)

  15. On luminescence bleaching of tidal channel sediments

    DEFF Research Database (Denmark)

    Fruergaard, Mikkel; Pejrup, Morten; Murray, Andrew S.

    2015-01-01

    We investigate the processes responsible for bleaching of the quartz OSL signal from tidal channel sediment. Tidal dynamics are expected to play an important role for complete bleaching of tidal sediments. However, no studies have examined the amount of reworking occurring in tidal channels...... and on tidal flats due to the mixing caused by currents and waves. We apply bed level data to evaluate the amount of vertical sediment reworking in modern tidal channels and at a tidal flat. Cycles of deposition and erosion are measured with a bed level sensor, and the results show that gross sedimentation...... was several times higher than net sedimentation. We propose that tidal channel sediment is bleached either on the tidal flat before it is transported to the tidal channels and incorporated in channel-fill successions or, alternatively, on the shallow intertidal part of the channel banks. Based...

  16. Side effects of external tooth bleaching

    DEFF Research Database (Denmark)

    Bruzell, E.M.; Pallesen, Ulla; Thoresen, N.R.

    2013-01-01

    Objective The study was performed to assess the risk of at-home and in-office bleaching procedures, and to recognise potential predictors for side effects. Design Multi-centre, questionnaire-based prospective study with follow-ups at around 14 days and around one year post-treatment. Setting......-office = 39.3% [n = 28]; p >0.05; 95% CI [OR]: 0.198‑1.102) whereas prevalence of gingival irritation was higher after in-office treatment (at-home = 14.0%; in-office = 35.7%; p effects...... attributed to the bleaching treatment in the at-home and in-office groups, respectively. Predictors for side effects were tooth sensitivity, surface loss and gingivitis when observed at inclusion. Treatment-related predictors were bleaching concentration and contact between tray and gingiva. Conclusions...

  17. Short communication: The influence of solids concentration and bleaching agent on bleaching efficacy and flavor of sweet whey powder.

    Science.gov (United States)

    Jervis, M G; Smith, T J; Drake, M A

    2015-04-01

    Recent studies have demonstrated the effect of bleaching conditions and bleaching agent on flavor and functional properties of whey protein ingredients. Solids concentration at bleaching significantly affected bleaching efficacy and flavor effects of different bleaching agents. It is not known if these parameters influence quality of sweet whey powder (SWP). The purpose of this study was to determine the effects of solids concentration and bleaching agent on the flavor and bleaching efficacy of SWP. Colored cheddar whey was manufactured, fat separated, and pasteurized. Subsequently, the whey (6.7% solids) was bleached, concentrated using reverse osmosis (RO) to 14% solids, and then spray dried, or whey was concentrated before bleaching and then spray dried. Bleaching treatments included a control (no bleaching, 50 °C, 60 min), hydrogen peroxide (HP; 250 mg/kg, 50 °C, 60 min), benzoyl peroxide (50 mg/kg, 50 °C, 60 min), lactoperoxidase (20 mg/kg of HP, 50 °C, 30 min), and external peroxidase (MaxiBright, DSM Food Specialties, Delft, the Netherlands; 2 dairy bleaching units/mL, 50 °C, 30 min). The experiment was repeated in triplicate. Sensory properties and volatile compounds of SWP were evaluated by a trained panel and gas chromatography-mass spectrometry, respectively. Bleaching efficacy (norbixin destruction) and benzoic acid were measured by HPLC. Differences in bleaching efficacy, sensory and volatile compound profiles, and benzoic acid were observed with different bleaching agents, consistent with previous studies. Solids concentration affected bleaching efficacy of HP, but not other bleaching agents. The SWP from whey bleached with HP or lactoperoxidase following RO had increased cardboard and fatty flavors and higher concentrations of lipid oxidation compounds compared with SWP from whey bleached before RO. The SWP bleached with benzoyl peroxide after RO contained less benzoic acid than SWP from whey bleached before RO. These results indicate that

  18. Tooth Bleaching: Current Concepts of the Procedure in Cosmetic ...

    African Journals Online (AJOL)

    Less caustic agents more recently introduced, in the late 1900s, have revived the interest of the dental profession in the art of tooth bleaching. These agents are now being packaged as bleaching kits, which may be used for in-office bleaching by the dentist or used at home by the patient under the supervision of the dentist.

  19. Bond strength of resin composite to light activated bleached enamel

    African Journals Online (AJOL)

    2015-09-02

    Sep 2, 2015 ... Conclusion: The various irradiation treatments following the application of the whiteness HP bleaching agent to enamel did not significantly reduce the µTBS within a 14‑day period. Key words: Bleaching agents, lasers, lasers neodymium: yttrium aluminum garnet, resin bonding, tooth bleaching. Date of ...

  20. Towards ideal NOx control technology for bio-oils and a gas multi-fuel boiler system using a plasma-chemical hybrid process

    International Nuclear Information System (INIS)

    Fujishima, Hidekatsu; Takekoshi, Kenichi; Kuroki, Tomoyuki; Tanaka, Atsushi; Otsuka, Keiichi; Okubo, Masaaki

    2013-01-01

    Highlights: • A multi-fuel boiler system combined with NO x aftertreatment is developed. • NO x is removed from flue gas by a plasma-chemical hybrid process. • Waste bio-oils are utilized as renewable energy source and for CO 2 reduction. • Ultra low NO x emission less than 2 ppm is achieved. • The boiler system is applicable for industrial use. - Abstract: A super-clean boiler system comprising a multi-fuel boiler and a reactor for plasma-chemical hybrid NO x aftertreatment is developed, and its industrial applications are examined. The purpose of this research is to optimally reduce NO x emission and utilize waste bio-oil as a renewable energy source. First, NO oxidation using indirect plasma at elevated flue gas temperatures is investigated. It is clarified that more than 98% of NO is oxidized when the temperature of the flue gas is less than 130 °C. Three types of waste bio-oils (waste vegetable oil, rice bran oil, and fish oil) are burned in the boiler as fuels with a rotary-type burner for CO 2 reduction considering carbon neutrality. NO x in the flue gases of these bio-oils is effectively reduced by the indirect plasma-chemical hybrid treatment. Ultralow NO x emission less than 2 ppm is achieved for 450 min in the firing of city natural gas fuel. The boiler system can be successfully operated automatically according to unsteady steam demand and using an empirical equation for Na 2 SO 3 supply rate, and can be used in industries as an ideal NO x control technology

  1. [Scalp burns induced by hair bleaching].

    Science.gov (United States)

    Bouschon, P; Bursztejn, A-C; Waton, J; Brault, F; Schmutz, J-L

    2018-03-14

    Hair bleaching is increasingly being carried out in hairdressing salons. The products used are a mixture of hydrogen peroxide and persulfates, both active chemical agents. Scalp burns secondary to hair bleaching are a traumatic adverse effect rarely discussed in publications that continue to be little known among healthcare professionals. We report the case of a 15-year-old girl with a plaque of scarring alopecia on the vertex. This lesion resulted from a deep burn following a hair-bleaching procedure. Healing took around 4 months, resulting in discomfort for our patient. This is a rare case of scarring alopecia following a basic chemical burn to the scalp. The oxidation reaction induced by the mixture of hydrogen peroxide and persulfates, prepared in a basic medium, causes bleaching of the melanin pigments in hair. The clinical presentation of a single, well limited, painful, oozing ulceration located at the vertex was similar to the other cases published in the literature. Although a chemical burning mechanism is most often incriminated, the procedure is always coupled with use of a heat source and associated thermal burn may occur. The delayed appearance of the lesion appears to be caused by the forming of surfactants by the hydrogen peroxide/persulfate mixture, resulting in slow dissolution of the oxidizing compounds within the stratum corneum. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  2. ADSORPTION ON HEAT REGENERATED SPENT BLEACHING ...

    African Journals Online (AJOL)

    Preferred Customer

    KINETICS AND THERMODYNAMICS OF AQUEOUS Cu(II) ADSORPTION ON. HEAT REGENERATED SPENT BLEACHING EARTH. Enos W. Wambu1*, Gerald K. Muthakia2*, Joseph K. wa-Thiong'o1 and Paul M. Shiundu3. 1Department of Chemistry, Kenyatta University, P.O. Box 43844-00100, Nairobi, Kenya.

  3. Bleaching of the discolored traumatized tooth

    DEFF Research Database (Denmark)

    Dahl, Jon E.; Kopperud, Siemen E.; Pallesen, Ulla

    2018-01-01

    This chapter focuses on the treatment of discolored traumatized teeth, most of them being non-vital and subsequently, endodontically treated. Tooth bleaching based upon hydrogen peroxide as the active agent, applied directly or produced in a chemical reaction from sodium perborate or carbamide pe...

  4. In-Office Bleaching During Orthodontic Treatment.

    Science.gov (United States)

    Gomes, Mauricio Neves; Dutra, Hélio; Morais, Alexandre; Sgura, Ricardo; Devito-Moraes, André Guaraci

    2017-04-01

    To demonstrate that it is possible to pursue teeth whitening treatment protocols during orthodontic treatment with no esthetic loss. Many patients undergoing orthodontic treatment desire to have a straight and well aligned dentition, but also whiter teeth. For many years, it was believed that carrying out a whitening treatment with positioned orthodontic brackets in place would result in localized spots on the enamel labial surfaces of teeth. However, a deeper understanding of the bleaching process suggests that the oxidation caused by products, which results from hydrogen peroxide decomposition, are able to diffuse peripherally into the tooth structure and reach even that under the cemented brackets. Two in-office-bleaching treatments were performed in patients using orthodontic fixed braces in two or three 40-minute sessions using a 35% hydrogen peroxide. In-office bleaching is possible and effective, even with orthodontic brackets in position. The teeth were successfully bleached despite the presence of brackets. All biological criteria have been fulfilled satisfying patients' expectations of aligned and whitened teeth in less time than if treatments had been performed separately, with satisfactory results and no esthetic loss. The whitening of teeth is possible during orthodontic treatment with fixed braces without any esthetic loss. The in-office bleaching treatment with brackets in position also may act as a motivation factor, preventing patient withdrawal or treatment interruption. Therefore, at the end of the orthodontic treatment, the patient is able to display an aligned, functional and whitened smile. (J Esthet Restor Dent 29:83-92, 2017). © 2016 Wiley Periodicals, Inc.

  5. Global warming and recurrent mass bleaching of corals.

    Science.gov (United States)

    Hughes, Terry P; Kerry, James T; Álvarez-Noriega, Mariana; Álvarez-Romero, Jorge G; Anderson, Kristen D; Baird, Andrew H; Babcock, Russell C; Beger, Maria; Bellwood, David R; Berkelmans, Ray; Bridge, Tom C; Butler, Ian R; Byrne, Maria; Cantin, Neal E; Comeau, Steeve; Connolly, Sean R; Cumming, Graeme S; Dalton, Steven J; Diaz-Pulido, Guillermo; Eakin, C Mark; Figueira, Will F; Gilmour, James P; Harrison, Hugo B; Heron, Scott F; Hoey, Andrew S; Hobbs, Jean-Paul A; Hoogenboom, Mia O; Kennedy, Emma V; Kuo, Chao-Yang; Lough, Janice M; Lowe, Ryan J; Liu, Gang; McCulloch, Malcolm T; Malcolm, Hamish A; McWilliam, Michael J; Pandolfi, John M; Pears, Rachel J; Pratchett, Morgan S; Schoepf, Verena; Simpson, Tristan; Skirving, William J; Sommer, Brigitte; Torda, Gergely; Wachenfeld, David R; Willis, Bette L; Wilson, Shaun K

    2017-03-15

    During 2015-2016, record temperatures triggered a pan-tropical episode of coral bleaching, the third global-scale event since mass bleaching was first documented in the 1980s. Here we examine how and why the severity of recurrent major bleaching events has varied at multiple scales, using aerial and underwater surveys of Australian reefs combined with satellite-derived sea surface temperatures. The distinctive geographic footprints of recurrent bleaching on the Great Barrier Reef in 1998, 2002 and 2016 were determined by the spatial pattern of sea temperatures in each year. Water quality and fishing pressure had minimal effect on the unprecedented bleaching in 2016, suggesting that local protection of reefs affords little or no resistance to extreme heat. Similarly, past exposure to bleaching in 1998 and 2002 did not lessen the severity of bleaching in 2016. Consequently, immediate global action to curb future warming is essential to secure a future for coral reefs.

  6. Global warming and recurrent mass bleaching of corals

    Science.gov (United States)

    Hughes, Terry P.; Kerry, James T.; Álvarez-Noriega, Mariana; Álvarez-Romero, Jorge G.; Anderson, Kristen D.; Baird, Andrew H.; Babcock, Russell C.; Beger, Maria; Bellwood, David R.; Berkelmans, Ray; Bridge, Tom C.; Butler, Ian R.; Byrne, Maria; Cantin, Neal E.; Comeau, Steeve; Connolly, Sean R.; Cumming, Graeme S.; Dalton, Steven J.; Diaz-Pulido, Guillermo; Eakin, C. Mark; Figueira, Will F.; Gilmour, James P.; Harrison, Hugo B.; Heron, Scott F.; Hoey, Andrew S.; Hobbs, Jean-Paul A.; Hoogenboom, Mia O.; Kennedy, Emma V.; Kuo, Chao-Yang; Lough, Janice M.; Lowe, Ryan J.; Liu, Gang; McCulloch, Malcolm T.; Malcolm, Hamish A.; McWilliam, Michael J.; Pandolfi, John M.; Pears, Rachel J.; Pratchett, Morgan S.; Schoepf, Verena; Simpson, Tristan; Skirving, William J.; Sommer, Brigitte; Torda, Gergely; Wachenfeld, David R.; Willis, Bette L.; Wilson, Shaun K.

    2017-03-01

    During 2015-2016, record temperatures triggered a pan-tropical episode of coral bleaching, the third global-scale event since mass bleaching was first documented in the 1980s. Here we examine how and why the severity of recurrent major bleaching events has varied at multiple scales, using aerial and underwater surveys of Australian reefs combined with satellite-derived sea surface temperatures. The distinctive geographic footprints of recurrent bleaching on the Great Barrier Reef in 1998, 2002 and 2016 were determined by the spatial pattern of sea temperatures in each year. Water quality and fishing pressure had minimal effect on the unprecedented bleaching in 2016, suggesting that local protection of reefs affords little or no resistance to extreme heat. Similarly, past exposure to bleaching in 1998 and 2002 did not lessen the severity of bleaching in 2016. Consequently, immediate global action to curb future warming is essential to secure a future for coral reefs.

  7. BioMEMS

    CERN Document Server

    Urban, Gerald A

    2007-01-01

    Explosive growth in the field of Microsystem Technology has introduced a variety of promising products in major disciplines from microelectronics to life sciences. 'Biomes' is a discipline which focuses on microsystems for living systems. This work presents the exciting field of bio-microsystems.

  8. Unexpected promotion of PCDD/F formation by enzyme-aided Cl2bleaching in non-wood pulp and paper mill.

    Science.gov (United States)

    Fang, Liping; Zheng, Minghui; Liu, Guorui; Zhao, Yuyang; Liu, Wenbin; Huang, Linyan; Guo, Li

    2017-02-01

    Enzyme-aided Cl 2 bleaching is widely considered as promising replacements for conventional Cl 2 bleaching in wood pulp and paper mills. However, the effects of using enzyme-aided bleaching on the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the non-wood pulp and paper mills are unclear. A field study was performed to investigate PCDD/F formation when enzyme-aided Cl 2 bleaching was used to replace conventional Cl 2 bleaching in non-wood pulp and paper mills. Unexpectedly, the PCDD/F toxic equivalents (TEQs) in solid samples were higher when using enzyme-aided bleaching (0.49-5.4 pg TEQ/g) than that using conventional Cl 2 bleaching (0.15-2.44 pg TEQ/g). Large amounts of octachlorodibenzo-p-dioxin were formed during the enzyme-aided bleaching process. This could have been because enzyme strongly promoted the release of organic molecules bound to lignin and thus accelerated the formation of octachlorodibenzo-p-dioxin through organic molecular precursors. Although enzyme-aided Cl 2 bleaching was previously considered to be efficient for reducing PCDD/F releases and to be the best available technologies and best environmental practices for wood pulp and paper mills, the results obtained in this study suggested the necessity and urgency to evaluate the suitability of enzyme-aided Cl 2 bleaching for non-wood pulp and paper mills that intensively practiced in developing countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Biosol Project: development of a new technology for the treatment of soils contaminated with hydrocarbons. bio-remediation by means of the addition of a biomass material (part one)

    International Nuclear Information System (INIS)

    2005-01-01

    The general mission of the project is to contribute to the development of new technologies based on the bio-remediation of soils contaminated with hydrocarbons. It is pretended to develop a bio-remediation technology based on the use 'on site' of a biomass material with absorbent properties that allows to reduce time and costs of treatment of contaminated soils by hydrocarbons in comparison with other current technologies. The biomass must be biodegradable and to act as a bio-stimulator of the endogenous microbial population, which is the responsible of the degradation of the pollutants contained in the soil. Another objective to achieve is that the new technology has to be able to decontaminate soils over the maximum thresholds of concentration reached by similar technologies of bio-remediation (50.000 ppm), in order to obtain that the technique could be competitive in comparison with other techniques more conventional based on chemical or physical treatments, and more aggressive from an ecological point of view (for example: chemical oxidation, thermal desorption). The amount and quality of published scientific works also demonstrate that still there are many points to investigate until understanding perfectly how the microorganisms interact with the different phases and compounds that conforms the porous matrix of the soil. In this sense IAP emphasizes the necessity to have a previous study of characterization for any contaminated soil that it wants to be treated by means of technologies based on the bio-remediation. In a similar line, it emphasizes the studies about bio-remediation presented in the 8. Consoil (May of 2003). The works presented in this forum put in evidence the necessity of arrange pilot experiences of application that allow to advance in the development of new technologies applicable to similar scales to the real ones. Also the bio-remediation based on the bio-stimulation of the endogenous microbial populations by means of the addition of

  10. Non-biodegradable polymer particles for drug delivery: A new technology for "bio-active" restorative materials.

    Science.gov (United States)

    Imazato, Satoshi; Kitagawa, Haruaki; Tsuboi, Ririko; Kitagawa, Ranna; Thongthai, Pasiree; Sasaki, Jun-Ichi

    2017-09-26

    To develop dental restorative materials with "bio-active" functions, addition of the capability to release active agents is an effective approach. However, such functionality needs to be attained without compromising the basic properties of the restorative materials. We have developed novel non-biodegradable polymer particles for drug delivery, aimed for application in dental resins. The particles are made using 2-hydroxyethyl methacrylate (HEMA) and a cross-linking monomer trimethylolpropane trimethacrylate (TMPT), with a hydrophilic nature to adsorb proteins or water-soluble antimicrobials. The polyHEMA/TMPT particles work as a reservoir to release fibroblast growth factor-2 (FGF-2) or cetylpyridinium chloride (CPC) in an effective manner. Application of the polyHEMA/TMPT particles loaded with FGF-2 to adhesives, or those loaded with CPC to resin-based endodontic sealers or denture bases/crowns is a promising approach to increase the success of the treatments by conferring "bio-active" properties to these materials to induce tissue regeneration or to inhibit bacterial infection.

  11. Towards Ideal NOx and CO2 Emission Control Technology for Bio-Oils Combustion Energy System Using a Plasma-Chemical Hybrid Process

    International Nuclear Information System (INIS)

    Okubo, M; Fujishima, H; Yamato, Y; Kuroki, T; Tanaka, A; Otsuka, K

    2013-01-01

    A pilot-scale low-emission boiler system consisting of a bio-fuel boiler and plasma-chemical hybrid NO x removal system is investigated. This system can achieve carbon neutrality because the bio-fuel boiler uses waste vegetable oil as one of the fuels. The plasma-chemical hybrid NO x removal system has two processes: NO oxidation by ozone produced from plasma ozonizers and NO 2 removal using a Na 2 SO 3 chemical scrubber. Test demonstrations of the system are carried out for mixed oils (mixture of A-heavy oil and waste vegetable oil). Stable combustion is achieved for the mixed oil (20 – 50% waste vegetable oil). Properties of flue gas—e.g., O 2 , CO 2 and NO x —when firing mixed oils are nearly the same as those when firing heavy oil for an average flue gas flow rate of 1000 Nm 3 /h. NO x concentrations at the boiler outlet are 90 – 95 ppm. Furthermore, during a 300-min continuous operation when firing 20% mixed oil, NO x removal efficiency of more than 90% (less than 10 ppm NO x emission) is confirmed. In addition, the CO 2 reduction when heavy oil is replaced with waste vegetable oil is estimated. The system comparison is described between the plasma-chemical hybrid NO x removal and the conventional technology.

  12. Bio-plastic (poly-hydroxy-alkanoate) production from municipal sewage sludge in the Netherlands: a technology push or a demand driven process?

    Science.gov (United States)

    Bluemink, E D; van Nieuwenhuijzen, A F; Wypkema, E; Uijterlinde, C A

    Valorisation of components from municipal 'waste' water and sewage sludge gets more and more attention in order to come to a circular economy by developing an efficient 'waste' to value concept. On behalf of the transition team 'Grondstoffenfabriek' ('Resource factory') a preliminary research was performed for all the Dutch water boards to assess the technical and economical feasibility of poly-hydroxy-alkanoate (PHA)-production from sewage sludge, a valuable product to produce bio-plastics. This study reveals that the production of bio-plastics from sewage sludge is feasible based on technical aspects, but not yet economically interesting, even though the selling price is relatively close to the actual PHA market price. (Selling price is in this particular case the indicative cost effective selling price. The cost effective selling price covers only the total production costs of the product.) Future process optimization (maximizing the volatile fatty acids production, PHA storage capacity, etc.) and market developments are needed and will result in cost reductions of the various sub-processes. PHA-production from sewage sludge at this stage is just a technology; every further research is needed to incorporate the backward integration approach, taking into account the market demand including associated product quality aspects.

  13. Sodium Hydroxide and Calcium Hydroxide Hybrid Oxygen Bleaching with System

    Science.gov (United States)

    Doelle, K.; Bajrami, B.

    2018-01-01

    This study investigates the replacement of sodium hydroxide in the oxygen bleaching stage using a hybrid system consisting of sodium hydroxide calcium hydroxide. Commercial Kraft pulping was studied using yellow pine Kraft pulp obtained from a company in the US. The impact of sodium hydroxide, calcium hydroxide hybrid system in regard to concentration, reaction time and temperature for Kraft pulp was evaluated. The sodium hydroxide and calcium hydroxide dosage was varied between 0% and 15% based on oven dry fiber content. The bleaching reaction time was varied between 0 and 180 minutes whereas the bleaching temperature ranged between 70 °C and 110 °C. The ability to bleach pulp was measured by determining the Kappa number. Optimum bleaching results for the hybrid system were achieved with 4% sodium hydroxide and 2% calcium hydroxide content. Beyond this, the ability to bleach pulp decreased.

  14. Panorama 2011: New bio-fuel production technologies: overview of these expanding sectors and the challenges facing them; Panorama 2011: Les nouvelles technologies de production de biocarburants: etat des lieux et enjeux des filieres en developpement

    Energy Technology Data Exchange (ETDEWEB)

    Lorne, D.; Chabrelie, M.F.

    2011-07-01

    The numerous research programmes looking at new-generation biofuels that were initiated over the last ten years are now starting to bear fruit. Although no plants are producing and marketing biofuels yet, the large-scale, industrial feasibility of second-generation bio-fuel production at competitive cost may be demonstrated in the short-term. As far as third generation biofuels derived from algal biomass are concerned, there is a great deal of R and D interest in the sector, but the technology is still only in its infancy. (author)

  15. Levels of enamel erosion for the application of bleaching agents

    OpenAIRE

    Díaz Soriano, Ana; Departamento Académico de Estomatología Biosocial.; Pérez Vargas, Luis; Departamento Academico de Estomatología Biosocial.; Mattos Vela, Manuel; Departamento Academico de Estomatología Biosocial.; Asurza Ruiz, José; Instituto Nacional de Enfermedades Neoplásicas - INEN.; Bernuy Torres, Luis

    2014-01-01

    Dental bleaching systems and its use of toothpaste with bleaching agents lead to search the effect of these systems on the enamel surface. Scientific evidence shows that these systems can provoke an answer in chemical shucture of the dental enamel with loss of calcium . The concentration of calcium was measured in ppm in 27 crowns of human bicuspids. The enamel erosion was measured through the liberation of calcium salts into teeth in two kinds of bleaching toothpastes : Crest whitening and C...

  16. Coral mass bleaching and reef temperatures at Navassa Island, 2006

    Science.gov (United States)

    Miller, M. W.; Piniak, G. A.; Williams, D. E.

    2011-01-01

    Bleaching and associated mortality is an extreme threat to the persistence of coral populations in the projected warming regime of the next few decades. Recent evidence indicates that thermal bleaching thresholds may be affected by water quality gradients. The unexpected encounter of a coral mass bleaching event at a remote, uninhabited Caribbean island (Navassa) during a routine reef assessment cruise in November 2006 provided the opportunity to characterize bleaching responses and thermal exposure in an oceanic area with negligible continental influence or human impact on water quality. The coral taxa most susceptible to bleaching were Agaricia spp. and Montastraea faveolata. Siderastraea siderea, Diploria spp. and Porites porites were intermediately affected, while Porites astreoides and Montastraea cavernosa were minimally affected and negligible bleaching was observed in Acropora palmata. Bleaching prevalence (colonies > 4 cm diameter) ranged from 0.16 to 0.63 among sites. Deeper sites (between 18 and 37 m) had significantly higher prevalence of bleaching than shallow sites (<10 m). This general pattern of more bleaching in deeper sites also occurred within species. Though exposure to high-temperature stress was not greater at deeper sites, water motion, which may bolster bleaching resistance, was likely less. In situ loggers indicated temperatures over 30 °C initiated at shallow sites in mid-August, at deeper sites in early September, and were persistent at all sites until mid-October. Long term (1983-2007) climatologies constructed from AVHRR SSTs suggest that the mass bleaching event observed at Navassa in 2006 corresponded with greater intensity and duration of warm temperature anomalies than occurred in 2005, for which no in situ observations (bleaching nor temperature) are available.

  17. Effects of a New Bleaching Gel on Tooth Whitening

    Science.gov (United States)

    2016-05-17

    include ease of application, reduced chair time and cost, high success rate, and safety of materials.6 Furthermore, bleaching teeth with 10... dental workhorse for over 70 years.4 HP’s bleaching success is attributed to its ability to penetrate tooth structure and produce free radicals that...home whitening. Due to the prevalence of HP and CP in many bleaching products, the dental literature is saturated with research on their respective

  18. Identifying well-bleached quartz using the different bleaching rates of quartz and feldspar luminescence signals

    DEFF Research Database (Denmark)

    Murray, A.S.; Thomsen, Kristina Jørkov; Masuda, N.

    2012-01-01

    the likely significance of the difficult-to-bleach residual feldspar signals in non-aeolian samples. For a set of mainly Late Pleistocene non-aeolian sediments, large aliquot quartz doses are then used to predict feldspar doses (based on a knowledge of the sample dose rates). The differences between observed...... that the large aliquot data are more likely to be correct. We conclude that a comparison of quartz and feldspar doses provides a useful independent method for identifying well-bleached quartz samples, and that it is unwise to apply statistical models to dose distributions without clear evidence for the physical...

  19. Therapeutic effectiveness of a new enzymatic bleaching dentifrice.

    Science.gov (United States)

    Forner, Leopaldo; Amengual, José; Liena, Carmen; Riutord, Pere

    2012-01-01

    Research into bleaching focuses on new products in order to minimize undesirable effects. This study evaluated the bleaching effectiveness of a new enzymatic-activated dentifrice. A total of 20 volunteers were bleached with a dentifrice containing 5% lactoperoxidase and 3% carbamide peroxide applied three times a day for two minutes over 21 days. Color was recorded before and after the treatment using a spectrophotometer. CIELAB differences were calculated before and after treatment using the paired t test (P whitening teeth. Enzymatic dental bleaching is able to increase the efficiency of low concentration peroxides, reducing the potential risk of peroxides on oral tissues.

  20. Coral community response to bleaching on a highly disturbed reef.

    Science.gov (United States)

    Guest, J R; Low, J; Tun, K; Wilson, B; Ng, C; Raingeard, D; Ulstrup, K E; Tanzil, J T I; Todd, P A; Toh, T C; McDougald, D; Chou, L M; Steinberg, P D

    2016-02-15

    While many studies of coral bleaching report on broad, regional scale responses, fewer examine variation in susceptibility among coral taxa and changes in community structure, before, during and after bleaching on individual reefs. Here we report in detail on the response to bleaching by a coral community on a highly disturbed reef site south of mainland Singapore before, during and after a major thermal anomaly in 2010. To estimate the capacity for resistance to thermal stress, we report on: a) overall bleaching severity during and after the event, b) differences in bleaching susceptibility among taxa during the event, and c) changes in coral community structure one year before and after bleaching. Approximately two thirds of colonies bleached, however, post-bleaching recovery was quite rapid and, importantly, coral taxa that are usually highly susceptible were relatively unaffected. Although total coral cover declined, there was no significant change in coral taxonomic community structure before and after bleaching. Several factors may have contributed to the overall high resistance of corals at this site including Symbiodinium affiliation, turbidity and heterotrophy. Our results suggest that, despite experiencing chronic anthropogenic disturbances, turbid shallow reef communities may be remarkably resilient to acute thermal stress.

  1. Arundo donax L. reed: new perspectives for pulping and bleaching. Part 4. Peroxide bleaching of organosolv pulps.

    Science.gov (United States)

    Shatalov, A A; Pereira, H

    2005-05-01

    A comparative study on TCF (totally chlorine-free) bleachability of organosolv pulps from the annual fibre crop Arundo donax L. (giant reed) was carried out using a simple three-stage peroxide bleaching sequence without oxygen pre-bleaching. ASAM (alkali-sulfite-anthraquinone-methanol), Organocell (alkali-anthraquinone-methanol) and ethanol-soda organosolv pulps were bleached and compared with kraft pulp, as a reference. The final brightness of 76-78% ISO was attained for all tested pulps. The chemical charge required to reach this level of brightness varied for different pulps (despite the equal initial content of the residual lignin) and directly related to starting brightness values. No direct correlation between brightness improvement and lignin removal during bleaching was found, indicating the influence of the specific pulp properties introduced by pulping process on bleaching chemistry. The general higher bleaching response of organosolv pulps from A. donax was noted in comparison with kraft.

  2. The influence of bleaching agent and temperature on bleaching efficacy and volatile components of fluid whey and whey retentate.

    Science.gov (United States)

    Fox, A J; Smith, T J; Gerard, P D; Drake, M A

    2013-10-01

    Fluid whey or retentate are often bleached to remove residual annatto Cheddar cheese colorant, and this process causes off-flavors in dried whey proteins. This study determined the impact of temperature and bleaching agent on bleaching efficacy and volatile components in fluid whey and fluid whey retentate. Freshly manufactured liquid whey (6.7% solids) or concentrated whey protein (retentate) (12% solids, 80% protein) were bleached using benzoyl peroxide (BP) at 100 mg/kg (w/w) or hydrogen peroxide (HP) at 250 mg/kg (w/w) at 5 °C for 16 h or 50 °CC for 1 h. Unbleached controls were subjected to a similar temperature profile. The experiment was replicated three times. Annatto destruction (bleaching efficacy) among treatments was compared, and volatile compounds were extracted and separated using solid phase microextraction gas chromatography mass spectrometry (SPME GC-MS). Bleaching efficacy of BP was higher than HP (P 0.05). Retentate bleached with HP at either temperature had higher relative abundances of pentanal, hexanal, heptanal, and octanal than BP bleached retentate (P < 0.05). Liquid wheys generally had lower concentrations of selected volatiles compared to retentates. These results suggest that the highest bleaching efficacy (within the parameters evaluated) in liquid whey is achieved using BP at 5 or 50 °C and at 50 °C with HP or BP in whey protein retentate. © 2013 Institute of Food Technologists®

  3. Research on environmental bioecosensing technology using ecological information; Seitaikei joho ni yoru kankyo bio eco sensing gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The bioecosensing technology was studied which detects and identifies feeble signals generated by biosystem communication in wide biological environment. The following were reported as current notable environmental biosensing technologies: a quick measurement method of environmental contaminants using immunological measurement method, analysis method of ecological state of microorganism using DNA probes, observation of ecosystem by bioluminescent system, measurement method of environmental changes and contaminants using higher animals and plants, and detection method of chemical contaminants using chemotaxis of microorganism. As a result, the new bioecosensing/monitoring technology in molecular level was suggested for identifying comprehensive environmental changes which could not be measured by previous physical and chemical methods, as changes in ecosystem corresponding to environmental changes. As the wide area remote sensing technology of environmental ecological information, sensing technology on the earth, aircraft and satellite was also discussed. 247 refs., 55 figs., 17 tabs.

  4. Comparison of laser and power bleaching techniques in tooth color change

    OpenAIRE

    Fekrazad, Reza; Alimazandarani, Shervin; Kalhori, Katayoun A.M.; Assadian, Hadi; Mirmohammadi, Seyed-Mahdi

    2017-01-01

    Background Laser-assisted bleaching uses laser beam to accelerate release of free radicals within the bleaching gel to decrease time of whitening procedure. The aim of this study was to compare the efficacy of power bleaching using Opalescence Xtra Boost? and laser bleaching technique using LaserSmile gel and diode laser as an activator in their tooth whitening capacity. Material and Methods Student t test showed that the laser bleaching group significantly outperformed the power bleaching gr...

  5. Business Development of Solid Waste Treatment Technology and Bio-Fertilizer Production through a Danish-Vietnamese Partnership

    DEFF Research Database (Denmark)

    Christensen, David

    2013-01-01

    , legislative and market context. The findings are useful for researchers and practitioners within the waste sector in Southeast Asian countries. The partnership’s business concept deals with the proposed introduction of improved Danish solid waste separation and treatment technology at a plant in one......-fertilizer market to be financially sustainable....... forward through socially and culturally embedded negotiations among its actors, shaping the technology in question. Additionally, the business development process is seen in an institutional perspective, demonstrating how Danish technology transferal is capable of being adapted to the Vietnamese physical...

  6. Degradation of Nitrobenzene Using Bio-Reduced Fe-Clays: Progress Towards the Development of an in-situ Groundwater Remediation Technology

    Science.gov (United States)

    White, M. L.; Fialips, C. I.

    2008-12-01

    Clay minerals are widely used in agricultural, industrial and environmental engineering applications due to their specific physical and chemical properties and their high abundance in soils in sediments. Currently however, Fe-bearing clays are not widely exploited in these applied fields. Fe-rich smectites, such as nontronite, can contain up to 20wt% of Fe2O3 as structural Fe(III) and if a suitable electron donor is available, this Fe(III) can be utilized by Fe-reducing bacteria as a terminal electron acceptor. When reduced, the overall reactivity of Fe-smectites changes, particularly where interactions with water and various organic compounds are involved. For instance, the presence of reduced Fe-smectites has been found to induce the degradation of certain organic contaminants found in groundwaters and the subsurface, e.g. chlorinated aliphatics and nitroaromatic compounds. The goal of this study is to develop an in-situ groundwater remediation technology that targets redox- sensitive organics, in the form of a permeable Bio Fe-clay barrier. To achieve this, the iron-reducing bacterium Shewanella algae BrY was first used to reduce structural FeIII in algae BrY was able to reduce structural FeIII within these clays to maximum Fe(II)/Fe(II)+Fe(III) ratios 0.34 and 0.19 for the nontronite and Speeton Clay, respectively, in the presence and absence of the electron shuttle, AQDS (9, 10-anthraquinone-2, 6-disulfonic acid). These results are novel because the capability of S. algae BrY to reduce structural Fe(III) in smectite clays has not previously been tested. Nitrobenzene was selected as the test redox-sensitive organic compound as it is a common subsurface contaminant and is of global ecotoxicological concern. To test the capability of bio- reduced Fe-clays to transform nitrobenzene to aniline (the less toxic and more stable degradation product of nitrobenzene), nontronite suspensions with reduction levels of 20% and 30% were spiked with various concentrations of

  7. [Development and perspective of bio-based chemical fiber industry].

    Science.gov (United States)

    Li, Zengjun

    2016-06-25

    Bio-based fiber is environment friendly, reproducible, easily biodegradable. Therefore, rapid development of bio-based fiber industry is an obvious in progress to replace petrochemical resources, develop sustainable economy, build resource saving and environment friendly society. This article describes the current development of bio-based fiber industry, analyzes existing problems, indicates the trends and objectives of bio-based fiber materials technology innovation and recommends developing bio-based fibers industry of our country.

  8. Does deposition depth control the OSL bleaching of fluvial sediment?

    NARCIS (Netherlands)

    Cunningham, A. C.; Wallinga, J.; Hobo, N.; Versendaal, A. J.; Makaske, B.; Middelkoop, H.

    2014-01-01

    The Optically Stimulated Luminescence (OSL) signal from fluvial sediment often contains a remnant from the previous deposition cycle, leading to a partially bleached equivalent-dose distribution. Although identification of the burial dose is of primary concern, the degree of bleaching could

  9. Investigating Motivations for Women's Skin Bleaching in Tanzania

    Science.gov (United States)

    Lewis, Kelly M.; Robkin, Navit; Gaska, Karie; Njoki, Lillian Carol

    2011-01-01

    Why do many African women continue to use damaging skin-bleaching cosmetics that contain dangerous chemicals (e.g., mercury) that may increase their rates of infertility, skin cancer, and serious skin/brain/kidney disease? To address this question, our study investigated motivations driving the preservation of skin-bleaching practices in Tanzania.…

  10. The evaluation of hydrogen peroxide bleaching of Gonometa ...

    African Journals Online (AJOL)

    The effect of hydrogen peroxide bleaching on Gonometa postica silk and the influence that temperature, pH and time duration had on hydrogen peroxide release , colour change, breaking load and stiffness were determined. The best bleaching (81 delta E) of the Gonometa postica silk fabric was obtained with 60 minutes ...

  11. The bleaching syndrome: manifestation of a post-colonial pathology ...

    African Journals Online (AJOL)

    The post-colonial root of African problems is directly related to skin color. Under the cloak of personal preference, light skin among African women has replaced dark skin as the native ideal. The aftermath is manifestation of the Bleaching Syndrome. Social Work professionals have overlooked the Bleaching Syndrome as ...

  12. Anolyte as an alternative bleach for stained cotton fabrics ...

    African Journals Online (AJOL)

    ... as the two- and three-factor interactions. The results from the study indicated that Anolyte was less effective than sodium hypochlorite as a stain remover for blood, tea, soot/mineral oil and blackcurrant juice. It was noted that the temperature of bleach liquids had an influence on the removal of stains by both bleach liquids.

  13. Color Recovery Effect of Different Bleaching Systems on a ...

    African Journals Online (AJOL)

    Background and Purpose: Discoloration of resin‑based composites is a commonly encountered problem, and bleaching agents may be used for the therapy of the existing discoloration. The purpose of this study was to investigate in vitro color recovery effect of different bleaching systems on the heavily discolored composite ...

  14. FT–Raman investigation of bleaching of spruce thermomechanical pulp

    Science.gov (United States)

    U.P. Agarwal; L.L. Landucci

    2004-01-01

    Spruce thermomechanical pulp was bleached initially by alkaline hydrogen peroxide and then by sodium dithionite and sodium borohydride. Near-infrared Fourier-transform–Raman spectroscopy revealed that spectral differences were due primarily to coniferaldehyde and p-quinone structures in lignin, new direct evidence that bleaching removes p-quinone structures. In...

  15. The Bleaching Syndrome: Manifestation of a Post-Colonial ...

    African Journals Online (AJOL)

    The post-colonial root of African problems is directly related to skin color. Under the cloak of personal preference, light skin among African women has replaced dark skin as the native ideal. The aftermath is manifestation of the Bleaching Syndrome. Guidance and Counselling professionals have overlooked the Bleaching ...

  16. Symbiont Dependent Thermal Bleaching Susceptiblity in Two Reef ...

    African Journals Online (AJOL)

    Symbiont Dependent Thermal Bleaching Susceptiblity in Two Reef-building Corals, Stylophora pistillata and Platygyra ryukyuensis . ... Symbiodinium ITS2 types exhibit diverse photo-physiological responses to thermal stress, and may partially explain the variable bleaching susceptibilities of some hermatypic coral species.

  17. Alkali and bleach treatment of the extracted cellulose from pineapple ...

    African Journals Online (AJOL)

    We successfully extracted cellulose from pineapple leaves (Ananas comosus) using alkali treatment and bleaching. Alkali treatment was done using aqueous sodium hydroxide while bleaching was done using acetate buffer and aqueous sodium chlorite. The extracted cellulose was characterized using Scanning electron ...

  18. Color Recovery Effect of Different Bleaching Systems on a ...

    African Journals Online (AJOL)

    2018-02-07

    Feb 7, 2018 ... Odontology 2016;104:305-9. 29. Joiner A. The bleaching of teeth: A review of the literature. J Dent 2006;34:412-9. 30. Haywood VB, Heymann HO. Nightguard vital bleaching: How safe is it? Quintessence Int 1991;22:515-23. 31. Fay RM, Servos T, Powers JM. Color of restorative materials after staining and ...

  19. The Evaluation of Science Learning Program, Technology and Society Application of Audio Bio Harmonic System with Solar Energy to Improve Crop Productivity

    Directory of Open Access Journals (Sweden)

    D. Rosana

    2017-04-01

    Full Text Available One of the greatest challenges in science learning is how to integrate a wide range of basic scientific concepts of physics, chemistry, and biology into an integrated learning material. Research-based teaching material in this area is still very poor and does not much involve students of science education in its implementation as part of the learning program science technology and society (STS. The purpose of this study is to get the result of evaluation of the teaching and learning of STS in the form of public service in Kulon Progo, Yogyakarta. The program to improve crop productivity through the application of Audio Bio Harmonic System (ABHS with solar energy have been selected for utilizing the natural animal sounds to open stomata of the leaves conducted during foliar fertilization, making it suitable for integrated science lessons. Component of evaluation model used is Stufflebeam model evaluation (CIPP. CIPP evaluation in these activities resulted in two aspects: The first aspect was improving the skills of students and farmers in using ABHS, and these two aspects, namely food crop productivity; (1 cayenne increased 76.4%, (2 increased red onions (56.3% and (3 of maize increased by 67.8%. Besides, it was also the effect of the application of ABHS on the rate of plant growth. The outcome of this study is the STS teaching materials and appropriate technology of ABHS with solar energy.

  20. Effects of bleaching agents on surface roughness of filling materials.

    Science.gov (United States)

    Markovic, Ljubisa; Jordan, Rainer Andreas; Glasser, Marie-Claire; Arnold, Wolfgang Hermann; Nebel, Jan; Tillmann, Wolfgang; Ostermann, Thomas; Zimmer, Stefan

    2014-01-01

    The aim of this study was to use a non-tactile optical measurement system to assess the effects of three bleaching agents' concentrations on the surface roughness of dental restoration materials. Two composites (Grandio, Venus) and one glass ionomer cement (Ketac Fil Plus) were used in this in vitro study. Specimens were treated with three different bleaching agents (16% and 22% carbamide peroxide (Polanight) and 38% hydrogen peroxide (Opalescence Boost)). Surface roughness was measured with an optical profilometer (Infinite Focus G3) before and after the bleaching treatment. Surface roughness increased in all tested specimens after bleaching treatment (p<0.05). Our in vitro study showed that dental bleaching agents influenced the surface roughness of different restoration materials, and the restoration material itself was shown to have an impact on alteration susceptibility. There seemed to be no clinical relevance in case of an optimal finish.

  1. Dental pulp vascular permeability changes induced by dental bleaching

    Directory of Open Access Journals (Sweden)

    Cristiane da Costa

    2012-02-01

    Full Text Available Aiming to compare the effect of different light sources for dental bleaching on vascular permeability of dental pulps, forty-eight incisors were used. The bleaching agent (35 % hydrogen peroxide was activated by halogen light; LED (Light Emitting Diode or LED, followed by laser phototherapy (LPT (λ = 780 nm; 3 J/cm². After the bleaching procedures, the animals received an intra-arterial dye injection and one hour later were sacrificed. The teeth were diaphanized and photographed. The amount of blue stain content of each dental pulp was quantified using a computer imaging program. The data was statistically compared (p < 0.05. The results showed a significant higher (p < 0.01 dye content in the groups bleached with halogen light, compared with the control, LED and LED plus LPT groups. Thus, tooth bleaching activated by LED or LED plus LPT induces lesser resulted in increased vascular permeability than halogen light.

  2. Coral bleaching pathways under the control of regional temperature variability

    Science.gov (United States)

    Langlais, C. E.; Lenton, A.; Heron, S. F.; Evenhuis, C.; Sen Gupta, A.; Brown, J. N.; Kuchinke, M.

    2017-11-01

    Increasing sea surface temperatures (SSTs) are predicted to adversely impact coral populations worldwide through increasing thermal bleaching events. Future bleaching is unlikely to be spatially uniform. Therefore, understanding what determines regional differences will be critical for adaptation management. Here, using a cumulative heat stress metric, we show that characteristics of regional SST determine the future bleaching risk patterns. Incorporating observed information on SST variability, in assessing future bleaching risk, provides novel options for management strategies. As a consequence, the known biases in climate model variability and the uncertainties in regional warming rate across climate models are less detrimental than previously thought. We also show that the thresholds used to indicate reef viability can strongly influence a decision on what constitutes a potential refugia. Observing and understanding the drivers of regional variability, and the viability limits of coral reefs, is therefore critical for making meaningful projections of coral bleaching risk.

  3. Bleaching of reef coelenterates in the San Blas Islands, Panama

    Science.gov (United States)

    Lasker, Howard R.; Peters, Esther C.; Coffroth, Mary Alice

    1984-12-01

    Starting in June 1983, 25 species of hermatypic corals, gorgonians, hydrocorals, anemones and zoanthids in the San Blas Islands, Panama, began showing signs of a loss of colour leading in some cases to a white “bleached” appearance. Histologic examination of six coral species indicated that bleaching was associated with drastic reductions in the density of zooxanthellae and with the atrophy and necrosis of the animal tissue. The severity of the bleaching varied among species and many species were unaffected. The species most extensively affected were: Agaricia spp., which became completely bleached and frequently died; Montastraea annularis which bleached and continued to survive; and Millepora spp. which bleached white but quickly regained their colouration. Shallow reefs dominated by Agaricia spp. suffered the most extensive bleaching. At one site, Pico Feo, 99% of the Agaricia (32% of the living cover) was bleached. On fore reers, which were dominated by Agaricia spp. and M. annularis, the proportion of M. annularis bleached ranged from 18 to 100% and that of Agaricia spp. from 30 to 53%. Transects at Sail Rock and House Reef were surveyed in August 1983 and January 1984. At those sites, 53% of the Agaricia cover died between August and January. The remaining living cover of Agaricia and of all other species exhibited normal colouration in January. Salinity and temperature were monitored every second day at 4 m depth between May 10 and August 28, 1983 at one of the localities. Bleaching was first observed within two weeks of a 2 °C rise in temperature which occurred in late May 1983. Temperatures remained at or above 31.5 °C for the following 3 weeks and were at or above 30 °C for an additional 4 weeks. The bleaching of corals in the San Blas was most likely due to those elevanted temperatures.

  4. Biological Visualization, Imaging and Simulation(Bio-VIS) at NASA Ames Research Center: Developing New Software and Technology for Astronaut Training and Biology Research in Space

    Science.gov (United States)

    Smith, Jeffrey

    2003-01-01

    The Bio- Visualization, Imaging and Simulation (BioVIS) Technology Center at NASA's Ames Research Center is dedicated to developing and applying advanced visualization, computation and simulation technologies to support NASA Space Life Sciences research and the objectives of the Fundamental Biology Program. Research ranges from high resolution 3D cell imaging and structure analysis, virtual environment simulation of fine sensory-motor tasks, computational neuroscience and biophysics to biomedical/clinical applications. Computer simulation research focuses on the development of advanced computational tools for astronaut training and education. Virtual Reality (VR) and Virtual Environment (VE) simulation systems have become important training tools in many fields from flight simulation to, more recently, surgical simulation. The type and quality of training provided by these computer-based tools ranges widely, but the value of real-time VE computer simulation as a method of preparing individuals for real-world tasks is well established. Astronauts routinely use VE systems for various training tasks, including Space Shuttle landings, robot arm manipulations and extravehicular activities (space walks). Currently, there are no VE systems to train astronauts for basic and applied research experiments which are an important part of many missions. The Virtual Glovebox (VGX) is a prototype VE system for real-time physically-based simulation of the Life Sciences Glovebox where astronauts will perform many complex tasks supporting research experiments aboard the International Space Station. The VGX consists of a physical display system utilizing duel LCD projectors and circular polarization to produce a desktop-sized 3D virtual workspace. Physically-based modeling tools (Arachi Inc.) provide real-time collision detection, rigid body dynamics, physical properties and force-based controls for objects. The human-computer interface consists of two magnetic tracking devices

  5. BioChroma - A New and Patented Technology for Processing Radioactive Wastewater from Nuclear Medicine Therapy Facilities in Hospitals and Clinics.

    Science.gov (United States)

    Rodríguez, José Canga

    2012-01-01

    After undergoing radionuclide therapy, patients generate wastewater with a considerable amount of radioactivity, which can reach levels of as much as 90% of the administered dose. Due to the risk of accumulation after discharge into the sewer, it is advisable to collect this effluent for its treatment prior to final discharge. Delay and decay (natural decomposition of the isotope) is the most commonly used technical method of abating radioactive iodine, but it is frequently criticized as being complex and very expensive. BioChroma is a technology that has been developed as an alternative to these complicated and expensive systems. This paper describes this new technology and presents, as an example, a system that was installed and successfully commissioned in the middle of 2008 in a nuclear medicine ward with 12 beds in Stuttgart (Germany). Based on existing legislation, the responsible authorities and the company that operated the hospital agreed on a maximum activity level of 5 Bq/l. If a typical delay and decay system would have been installed, the 180 m(3) treatment plant that was already available in the hospital cellar would have to be extended by additional 150 m(3). By implementing the patented BioChroma process, the space requirements were reduced by 75%. For instance, since the new system was integrated into the existing installation, tanks accounting for 120 m³ could be used as buffering volume in the new wastewater treatment plant. The operation of the referred plant is currently producing very good results with values below the specified limit of 5 Bq/l for the isotope (131)I. In addition, (90)Y has been reported to be eliminated at the same time. Over the past 2 years of operation, the wastewater treatment plant has been able to achieve a maximum processing capacity of more than 2,000 l/day, which equates to a nuclear medicine ward with approx. 20 beds. The highest level recorded during the test period (of 180 days after start-up) was a peak of

  6. Bio-fuels; Les biocarburants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This report presents an overview of the technologies which are currently used or presently developed for the production of bio-fuels in Europe and more particularly in France. After a brief history of this production since the beginning of the 20. century, the authors describe the support to agriculture and the influence of the Common Agricultural Policy, outline the influence of the present context of struggle against the greenhouse effect, and present the European legislative context. Data on the bio-fuels consumption in the European Union in 2006 are discussed. An overview of the evolution of the activity related to bio-fuels in France, indicating the locations of ethanol and bio-diesel production facilities, and the evolution of bio-fuel consumption, is given. The German situation is briefly presented. Production of ethanol by fermentation, the manufacturing of ETBE, the bio-diesel production from vegetable oils are discussed. Second generation bio-fuels are then presented (cellulose enzymatic processing), together with studies on thermochemical processes and available biomass resources.

  7. Production of bio-energies

    International Nuclear Information System (INIS)

    Gurtler, J.L.; Femenias, A.; Blondy, J.

    2009-01-01

    After having indicated the various possible origins of biomass, this paper considers the issue of bio-energies, i.e., energies produced with biomass related to forest or agriculture production. Some indicators are defined (share of renewable energies, share of biomass in the energy production and consumption, number of production units). Stake holders are identified. Then, major and emerging trends are identified and discussed. The major trends are: development and diversification of renewable energies, development of bio-fuels with the support of incentive policies, prevalence of the wood-energy sector on the whole renewable energies, increase of surfaces dedicated to bio-fuels since the end of the 1990's, a French biogas sector which is late with respect to other countries. The emerging trends are: the important role of oil price in the development of bio-fuels, a necessary public support for the development of biogas, mobilization of research and development of competitiveness poles for bio-industries. Some prospective issues are also discussed in terms of uncertainties (soil availabilities, environmental performance of bio-fuels, available biomass resource, need of a technological advance, and evolution of energy needs on a medium term, tax and public policy). Three hypotheses of bio-energy evolutions are discussed

  8. Which future for aviation bio-fuels?

    International Nuclear Information System (INIS)

    Botti, Jean; Combarnous, Michel; Jarry, Bruno; Monsan, Pierre; Burzynski, Jean-Pierre; Jeuland, Nicolas; Porot, Pierre; Demoment, Pascale; Gillmann, Marc; Marchand, Philippe; Kuentzmann, Paul; Kurtsoglou, Nicolas; Lombaert-Valot, Isabelle; Pelegrin, Marc; Renvier, Jacques; Rousseau, Julien; Stadler, Thierry; Tremeau, Benoit

    2014-01-01

    This collective report proposes a detailed overview of the evolution of aviation fuels and bio-fuels from technological, regulatory and economic points of view. It also proposes a road-map for possible future evolutions, and outlines the different assessments between American and European countries regarding the predictions for the beginning of industrial production and use of bio-jet-fuel. After having recalled international objectives, an overview of European and French commitments for technological and operational advances, and a discussion of the role of bio-fuels in the carbon cycle, the report presents various technical constraints met in aircraft industry and describes the role bio-fuels may have. The next part proposes an overview of bio-fuels which are industrially produced in the world in 2013. The authors then focus on aviation bio-fuels (main production processes, thermo-chemical processes), discuss the political context, and examine obstacles, partnerships and the role of public authorities

  9. [Preface for special issue on bio-based materials (2016)].

    Science.gov (United States)

    Weng, Yunxuan

    2016-06-25

    Bio-based materials are new materials or chemicals with renewable biomass as raw materials such as grain, legume, straw, bamboo and wood powder. This class of materials includes bio-based polymer, biobased fiber, glycotechnology products, biobased rubber and plastics produced by biomass thermoplastic processing and basic biobased chemicals, for instance, bio-alcohols, organic acids, alkanes, and alkenes, obtained by bio-synthesis, bio-processing and bio-refinery. Owing to its environmental friendly and resource conservation, bio-based materials are becoming a new dominant industry taking the lead in the world scientific and technological innovation and economic development. An overview of bio-based materials development is reported in this special issue, and the industrial status and research progress of the following aspects, including biobased fiber, polyhydroxyalkanoates, biodegradable mulching film, bio-based polyamide, protein based biomedical materials, bio-based polyurethane, and modification and processing of poly(lactic acid), are introduced.

  10. Invited review: Annatto usage and bleaching in dairy foods.

    Science.gov (United States)

    Kang, E J; Campbell, R E; Bastian, E; Drake, M A

    2010-09-01

    Annatto is a yellow/orange colorant that is widely used in the food industry, particularly in the dairy industry. Annatto, consisting of the carotenoids bixin and norbixin, is most commonly added to produce orange cheese, such as Cheddar, to achieve a consistent color over seasonal changes. This colorant is not all retained in the cheese, and thus a percentage remains in the whey, which is highly undesirable. As a result, whey is often bleached. Hydrogen peroxide and benzoyl peroxide are the 2 bleaching agents currently approved for bleaching whey in the United States. Recent studies have highlighted the negative effect of bleaching on whey flavor while concurrently there is a dearth of current studies on bleaching conditions and efficacy. Recent international mandates have placed additional concern on the use of benzoyl peroxide as a bleaching agent. This review discusses the advantages, disadvantages, regulatory concerns, flavor implications, and optimal usage conditions of 2 widely used bleaching agents, hydrogen peroxide and benzoyl peroxide, as well as a few alternative methods including lipoxygenase, peroxidase, and lactoperoxidase systems. Copyright (c) 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  11. In Vitro Comparative Study of Two Different Bleaching Agents on Micro-hardness Dental Enamel.

    Science.gov (United States)

    Fatima, Nazish; Ali Abidi, Syed Yawar; Meo, Ashraf Ali

    2016-02-01

    To evaluate the effect of home-use bleaching agent containing 16% Carbamide Peroxide (CP) and in-office bleaching agent containing 38% Hydrogen Peroxide (HP) on enamel micro-hardness. An in vitroexperimental study. Department of Operative Dentistry and Science of Dental Materials at Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences and Material Engineering Department of NED University of Engineering and Technology, Karachi, from July to December 2014. Atotal of 90 enamel slabs from 45 sound human 3rd molar were randomly divided into 3 groups. Each group contained 30 specimens (n=30). Group 1 was kept in artificial saliva at 37°C in incubator during the whole experiment. However, Groups 2 and 3 were treated with power whitening gel and tooth whitening pen respectively. After bleaching session, specimens were thoroughly rinsed with deionized water again for 10 seconds and then stored in artificial saliva at 37°C in incubator. Artificial saliva was changed after every 2 days. The Vickers hardness tester (Wolpert 402 MVD, Germany) was adjusted to a load of 0.1 kg (100 gm) and dwell time of 5 seconds. Three Vickers were performed on each specimen using a hardness tester according to the ISO 6507-3:1998 specification. Micro-hardness measurements were performed before and after bleaching at day 1, 7 and 14. In the control group, the baseline micro-hardness was 181.1 ±9.3 which was reduced after the storage on day 1, 7 and 14 (p = 0.104). In Group 2, baseline micro-hardness was 180.4 ±10.1 which was reduced to 179.79 ±10.0 units after day 1. Whereas, on day 7 and 14, the values of micro-hardness were 179.8 ±10 and 179.7 ±10.29, respectively (p=0.091). Furthermore, the baseline micro-hardness in Group 3 was 174.0 ±22.9 units which was reduced to 173 ±23 on day 1, 170 ±30 on day 7 and 173 ±23 on day 14 (p = 0.256). The statistically insignificant difference was found among micro-hardness values of different bleaching

  12. A bleaching earth from egyptian local deposits

    Directory of Open Access Journals (Sweden)

    El Kinawy, Omayma S.

    2001-10-01

    Full Text Available The present investigation deals with the bleaching of vegetable oils using activated clays collected from some deposits in Egypt as compared to Tonsil FF currently used by local oil industry. The comparison was made; not only on the basis of the decolourising power of the earth, but also on the basis of its effects on the oil acidity, formation of the oil peroxides and the decomposition rate of the formed peroxides to aldehydes and ketones during the bleaching process. The activation of the collected earth samples was made using 4N HCl, 6N HCl and 30 % H2SO4. The bleaching tests of the activated samples were performed using the major four oil types processed in Egypt being cottonseed, sunflower, soybean and palm oils. In addition to the laboratory-evaluation tests, the performance of the activated samples, which showed promise on the lab-scale have been also tested on an industrial scale. The industrial application has proved that the activated local earth's can be successfully used as bleaching earth of local oils. Thus it can be used as a substitute of the varieties currently imported and used by the local oil sector.La presente investigación trata de la decoloración de aceites vegetales usando tierras activadas obtenidas de yacimientos egipcios, comparándola con el Tonsil FF usado normalmente en la industria oleícola local. La comparación se realizó, no sólo sobre la base del poder decolorante de la tierra, sino también sobre la base de sus efectos en la acidez del aceite, la formación de peróxidos y la velocidad de descomposición de los peróxidos formados en aldehidos y cetonas durante el proceso de decoloración. La activación de las muestras de tierras recogidas se hizo utilizando ClH 4N, ClH 6N y H2SO4 30 %. Los tests de decoloración de las muestras activadas se llevaron a cabo usando los cuatro tipos mayoritarios de aceites procesados en Egipto: aceite de semilla de algodón, de girasol, de soja y de palma. Además de los

  13. Effect of light energy on peroxide tooth bleaching.

    Science.gov (United States)

    Luk, Karen; Tam, Laura; Hubert, Manfred

    2004-02-01

    Light-activated bleaching is a method of tooth whitening. The authors conducted a study to compare the whitening effects and tooth temperature changes induced by various combinations of peroxide bleaches and light sources. The authors randomly assigned 250 extracted human teeth halves into experimental groups (n = 10). A placebo gel (control), a 35 percent hydrogen peroxide or a 10 percent carbamide peroxide bleach was placed on the tooth surface and was irradiated with no light (control); a halogen curing light; an infrared, or IR, light; an argon laser; or a carbon dioxide, or CO2, laser. Color changes were evaluated immediately, one day and one week after treatment using a value-oriented shade guide and an electronic dental color analyzer. The outer enamel and inner dentin surface temperatures were monitored before and immediately after each 30-second application of light using a thermocouple thermometer. Color and temperature changes were significantly affected by an interaction of the bleach and light variables. The application of lights significantly improved the whitening efficacy of some bleach materials, but it caused significant temperature increases in the outer and inner tooth surfaces. The IR and CO2 laser lights caused the highest tooth temperature increases. Dentists performing an in-office bleaching technique with the use of an additional light source to accelerate tooth whitening should consider the specific bleaching agent being used, as well as the potential risks of heating teeth. A specific combination of bleach and light that demonstrates good color change and little temperature rise should be selected for in-office tooth bleaching.

  14. Intrapulpal temperature variation during bleaching with various activation mechanisms

    Directory of Open Access Journals (Sweden)

    Sílvia Masae de Araujo Michida

    2009-10-01

    Full Text Available OBJECTIVES: The aim of this study was to evaluate the intrapulpal temperature variation after bleaching treatment with 35% hydrogen peroxide using different sources of activation. MATERIAL AND METHODS: Twenty-four human teeth were sectioned in the mesiodistal direction providing 48 specimens, and were divided into 4 groups (n=12: (G1 Control - Bleaching gel without light activation, (G2 Bleaching gel + halogen light, (G3 Bleaching gel + LED, (G4 Bleaching gel + Nd:YAG Laser. The temperatures were recorded using a digital thermometer at 4 time points: before bleaching gel application, 1 min after bleaching gel application, during activation of the bleaching gel, and after the bleaching agent turned from a dark-red into a clear gel. Data were analyzed statistically by the Dunnet's test, ANOVA and Tukey's test (a=0.05. RESULTS: The mean intrapulpal temperature values (ºC in the groups were: G1: 0.617 ± 0.41; G2: 1.800 ± 0.68; G3: 0.975 ± 0.51; and G4: 4.325 ± 1.09. The mean maximum temperature variation (MTV values were: 1.5ºC (G1, 2.9ºC (G2, 1.7ºC (G3 and 6.9ºC (G4. When comparing the experimental groups to the control group, G3 was not statistically different from G1 (p>0.05, but G2 and G4 presented significantly higher (p<0.05 intrapulpal temperatures and MTV. The three experimental groups differed significantly (p<0.05 from each other. CONCLUSIONS: The Nd:YAG laser was the activation method that presented the highest values of intrapulpal temperature variation when compared with LED and halogen light. The group activated by LED light presented the lowest values of temperature variation, which were similar to that of the control group.

  15. Atmospheric Pressure Plasma Jet as an Accelerator of Tooth Bleaching.

    Science.gov (United States)

    Santak, Vedran; Zaplotnik, Rok; Milosevic, Slobodan; Klaric, Eva; Tarle, Zrinka

    2014-12-01

    To study the effect of atmospheric pressure plasma (APP) jet as a potential accelerator of the degradation of hydrogen peroxide in bleaching gels which could lead to better and faster bleaching. 25 pastilles of hydroxylapatite were colored in green tea for 8 hours and were randomly divided into five groups (n = 5). The bleaching process was performed with 30% and 40% hydrogen peroxide (HP) gel alone and in conjunction with helium APP jet. During the bleaching treatment, optical emission spectroscopy and non-contact surface temperature measurement using pyrometer were performed. Color of the pastilles was determined by a red-green-blue (RGB) colorimeter. PH values of bleaching gels were measured before and after the plasma treatment on additional 10 pastilles using a pH meter with contact pH electrode. The color measurements of pastilles before and after the treatment showed that treatment with APP jet improved the bleaching effect by 32% and 15% in the case of 30% and 40% HP gel. Better results were obtained approximately six times faster than with a procedure suggested by the bleaching gel manufacturer. Optical emission spectroscopy proved that plasma has a chemically active role on the gel. After the APP treatment, pH values of bleaching gels dropped to about 50-75% of their initial value while the surface temperature increased by 8-10˚C above baseline. The use of plasma jet provides more effective bleaching results in a shorter period of time without a significant temperature increase which may cause damage of the surrounding tissue.

  16. Moving forward in plant food safety and security through NanoBioSensors: Adopt or adapt biomedical technologies?

    Science.gov (United States)

    Sharma, Tarun K; Ramanathan, Rajesh; Rakwal, Randeep; Agrawal, Ganesh K; Bansal, Vipul

    2015-05-01

    Plant-based foods are integral part of our day-to-day diet. Increasing world population has put forth an ever increasing demand for plant-based foods, and food security remains a major concern. Similarly, biological, chemical, and physical threats to our food and increasing regulatory demands to control the presence of foreign species in food products have made food safety a growing issue. Nanotechnology has already established its roots in diverse disciplines. However, the food industry is yet to harness the full potential of the unique capabilities offered by this next-generation technology. While there might be safety concerns in regards to integration of nanoproducts with our food products, an aspect of nanotechnology that can make remarkable contribution to different elements of the food chain is the use of nanobiosensors and diagnostic platforms for monitoring food traceability, quality, safety, and nutritional value. This brings us to an important question that whether existing diagnostic platforms that have already been well developed for biomedical and clinical application are suitable for food industry or whether the demands of the food industry are altogether different that may not allow adoption/adaptation of the existing technology. This review is an effort to raise this important "uncomfortable" yet "timely" question. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. An innovative method of ocular prosthesis fabrication by bio-CAD and rapid 3-D printing technology: A pilot study.

    Science.gov (United States)

    Alam, Md Shahid; Sugavaneswaran, M; Arumaikkannu, G; Mukherjee, Bipasha

    2017-08-01

    Ocular prosthesis is either a readymade stock shell or custom made prosthesis (CMP). Presently, there is no other technology available, which is either superior or even comparable to the conventional CMP. The present study was designed to fabricate ocular prosthesis using computer aided design (CAD) and rapid manufacturing (RM) technology and to compare it with custom made prosthesis (CMP). The ocular prosthesis prepared by CAD was compared with conventional CMP in terms of time taken for fabrication, weight, cosmesis, comfort, and motility. Two eyes of two patients were included. Computerized tomography scan of wax model of socket was converted into three dimensional format using Materialize Interactive Medical Image Control System (MIMICS)software and further refined. This was given as an input to rapid manufacturing machine (Polyjet 3-D printer). The final painting on prototype was done by an ocularist. The average effective time required for fabrication of CAD prosthesis was 2.5 hours; and weight 2.9 grams. The same for CMP were 10 hours; and 4.4 grams. CAD prosthesis was more comfortable for both the patients. The study demonstrates the first ever attempt of fabricating a complete ocular prosthesis using CAD and rapid manufacturing and comparing it with conventional CMP. This prosthesis takes lesser time for fabrication, and is more comfortable. Studies with larger sample size will be required to further validate this technique.

  18. Translating silicon nanowire BioFET sensor-technology to embedded point-of-care medical diagnostics

    DEFF Research Database (Denmark)

    Pfreundt, Andrea; Zulfiqar, Azeem; Patou, François

    2013-01-01

    Silicon nanowire and nanoribbon biosensors have shown great promise in the detection of biomarkers at very low concentrations. Their high sensitivity makes them ideal candidates for use in early-stage medical diagnostics and further disease monitoring where low amounts of biomarkers need to be de......Silicon nanowire and nanoribbon biosensors have shown great promise in the detection of biomarkers at very low concentrations. Their high sensitivity makes them ideal candidates for use in early-stage medical diagnostics and further disease monitoring where low amounts of biomarkers need...... to be detected. However, in order to translate this technology from the bench to the bedside, a number of key issues need to be taken into consideration: Integrating nanobiosensors-based technology requires to overcome the difficult tradeoff between imperatives for high device reproducibilty and associated......, which require a specific set of biomakers to be identified and quantified simultaneously, can thus be readily translated onto this platform. After hydrogen termination of the silicon surface an alkyne monolayer is formed based on a hydrosilylation process. Antibodies and other receptor proteins can...

  19. Bleaching and diffusion dynamics in optofluidic dye lasers

    DEFF Research Database (Denmark)

    Gersborg-Hansen, Morten; Balslev, Søren; Mortensen, Asger

    2007-01-01

    The authors have investigated the bleaching dynamics that occur in optofluidic dye lasers where the liquid laser dye in a microfluidic channel is locally bleached due to optical pumping. They find that for microfluidic devices, the dye bleaching may be compensated through diffusion of dye molecules...... alone. By relying on diffusion rather than convection to generate the necessary dye replenishment, their observation potentially allows for a significant simplification of optofluidic dye laser device layouts, omitting the need for cumbersome and costly external fluidic handling or on-chip microfluidic...

  20. Reuse of discarded deactivated bleaching earth in the bleaching of oils

    Directory of Open Access Journals (Sweden)

    Girgis, Adel Y.

    2005-03-01

    Full Text Available Discarded bleaching earth was used after its reactivation for the bleaching of sunflower, soybean and corn oils. The efficiency of reactivated bleaching earth was compared to the efficiency of virgin activated bleaching earth. Acid reactivated earth (pH 2.5-3 had a slightly higher content in silicone than virgin activated or neutralized reactivated earths. The best results in the color of sunflower and corn oils were obtained when neutralized earth (pH 6–7 was used at 1 and 2 % levels. Acid reactivated earth used at 2 % achieved a higher reduction in soybean oil color than virgin earth (pH 3 at the same dosage. Both reactivated earths reduced peroxide value, iron, conjugated dienes and soap, while they increased acidity and conjugated trienes. Furthermore, these reactivated earths determined higher decrements in the oil induction period than virgin earth. Reactivated earth could be used for 5 cycles for the bleaching of soybean or corn oils and for more than 6 cycles for sunflower oil.Tierra decolorante desechada, fue empleada, tras su reactivación para decolorar aceites de girasol, soja y maíz. La eficiencia de la tierra decolorante reactivada fue comparada con la de la virgen activada. La tierra reactivada ácida (pH 2,5–3 tuvo ligeramente mayor contenido en silicona que la tierra virgen o la reactivada neutra. Los mejores resultados en el color de los aceites de girasol y maíz fueron obtenidos cuando se emplearon niveles del 1 y 2 % de tierra reactivada neutra (pH 6-7. La tierra ácida reactivada, usada al 2 % consiguió una mayor reducción del color del aceite de soja, que una misma dosis de tierra virgen (pH 3. Ambas tierras reactivadas redujeron el índice de peróxidos, hierro, dienos conjugados y jabón de los aceites, mientras que hicieron aumentar la acidez y los trienos conjugados. Además, estas tierras reactivadas determinaron mayores descensos en los periodos de inducción del aceite que la tierra virgen. Las tierras

  1. A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp

    Directory of Open Access Journals (Sweden)

    Farhad Zeyni

    2013-06-01

    Full Text Available Unbleached chemi-mechanical pulp of 85% pulp yield and produced from hornbeam, beech and populus woods respectively by 3:1:1 ratio, was used for peroxide bleaching. Two bleaching systems, alkali peroxide (conventional bleaching and activated peroxide by TAED activator, were used for pulp bleaching. Bleaching treatments included different percentages of hydrogen peroxide and caustic soda consumption. In this research, the hydrogen peroxide consumption rate, pulp yield, process selectivity, bleached pulp brightness and bleaching effluent pollution load (COD were investigated. Results showed that, brightness values were increased by bleach chemicals charge rising, in both bleaching systems, but the increasing trend was downward. Also, pulp yield was decreased by increase of chemical charges, but residual peroxide was raised. The activated peroxide process compare to conventional process had lower efficiency and brightness improvement values of pulp were less than those of alkali peroxide process. But pulp yield and effluent pollution load was less by activated peroxide bleaching.

  2. Climatic response variability and machine learning: development of a modular technology framework for predicting bio-climatic change in pacific northwest ecosystems"

    Science.gov (United States)

    Seamon, E.; Gessler, P. E.; Flathers, E.

    2015-12-01

    The creation and use of large amounts of data in scientific investigations has become common practice. Data collection and analysis for large scientific computing efforts are not only increasing in volume as well as number, the methods and analysis procedures are evolving toward greater complexity (Bell, 2009, Clarke, 2009, Maimon, 2010). In addition, the growth of diverse data-intensive scientific computing efforts (Soni, 2011, Turner, 2014, Wu, 2008) has demonstrated the value of supporting scientific data integration. Efforts to bridge this gap between the above perspectives have been attempted, in varying degrees, with modular scientific computing analysis regimes implemented with a modest amount of success (Perez, 2009). This constellation of effects - 1) an increasing growth in the volume and amount of data, 2) a growing data-intensive science base that has challenging needs, and 3) disparate data organization and integration efforts - has created a critical gap. Namely, systems of scientific data organization and management typically do not effectively enable integrated data collaboration or data-intensive science-based communications. Our research efforts attempt to address this gap by developing a modular technology framework for data science integration efforts - with climate variation as the focus. The intention is that this model, if successful, could be generalized to other application areas. Our research aim focused on the design and implementation of a modular, deployable technology architecture for data integration. Developed using aspects of R, interactive python, SciDB, THREDDS, Javascript, and varied data mining and machine learning techniques, the Modular Data Response Framework (MDRF) was implemented to explore case scenarios for bio-climatic variation as they relate to pacific northwest ecosystem regions. Our preliminary results, using historical NETCDF climate data for calibration purposes across the inland pacific northwest region

  3. Translating silicon nanowire BioFET sensor-technology to embedded point-of-care medical diagnostics

    DEFF Research Database (Denmark)

    Pfreundt, Andrea; Zulfiqar, Azeem; Patou, François

    2013-01-01

    Silicon nanowire and nanoribbon biosensors have shown great promise in the detection of biomarkers at very low concentrations. Their high sensitivity makes them ideal candidates for use in early-stage medical diagnostics and further disease monitoring where low amounts of biomarkers need to be de......Silicon nanowire and nanoribbon biosensors have shown great promise in the detection of biomarkers at very low concentrations. Their high sensitivity makes them ideal candidates for use in early-stage medical diagnostics and further disease monitoring where low amounts of biomarkers need...... rising fabrication costs. Also the translation of nano-scale sensor technology into daily-use point-of-care devices requires acknowledgement of the end-user requirements, making device portability and human-interfacing a focus point in device development. Sample handling or purification for instance...

  4. Flotation of Toxocara canis Eggs in Commercial Bleach and Effects of Bleach Treatment Times on Larval Development in These Eggs.

    Science.gov (United States)

    von Dohlen, Alexa Rosypal; Houk-Miles, Alice E; Zajac, Anne M; Lindsay, David S

    2017-04-01

    Toxocara canis is a common intestinal nematode of young dogs. Puppies contaminate the environment with large numbers of eggs that can embryonate and become infective in less than a month. Embryonated eggs are infectious for humans and other paratenic hosts. Most T. canis infections in humans are asymptomatic; however, migration of T. canis larvae in the eye and in the central nervous system can result in vision loss, blindness, and even death. The eggs of T. canis are highly resistant to harsh environmental conditions and routinely used chemical disinfectants. The objective of this study was to evaluate the effects of full-strength commercial bleach (5.25% sodium hypochlorite solution) treatment on development of T. canis eggs and to report our serendipitous finding that T. canis eggs in dog feces can float in passive fecal flotation tests using bleach. We also demonstrated that T. canis eggs could be identified using the McMaster's fecal eggs counting test using 100% bleach. Toxocara canis eggs collected from the feces of naturally infected 4-8 wk old puppies were treated with full-strength bleach (5.25% sodium hypochlorite solution) for 15 min, 30 min, 60 min, and 120 min; washed free of bleach smell by centrifugation; and resuspended in 0.1 N sulfuric acid solution to undergo larval development at room temperature for 18 days after exposure to bleach. Motile larvae were observed in T. canis eggs in all groups treated for 15-120 min and eggs continuously exposed to bleach for 18 days. Our results indicate that bleach may not be an appropriate disinfectant for dog kennels, cages, or laboratory utensils and work surfaces. Toxocara canis eggs are resistant to bleach treatment and continue to pose a risk for canine and human infections. Further study is needed to find the most appropriate methods for disinfection and removal of eggs to reduce the risk of transmission of this parasite.

  5. Improvement in rice straw pulp bleaching effluent quality by incorporating oxygen delignification stage prior to elemental chlorine-free bleaching.

    Science.gov (United States)

    Kaur, Daljeet; Bhardwaj, Nishi K; Lohchab, Rajesh Kumar

    2017-10-01

    Environmental degradation by industrial and other developmental activities is alarming for imperative environmental management by process advancements of production. Pulp and paper mills are now focusing on using nonwood-based raw materials to protect forest resources. In present study, rice straw was utilized for pulp production as it is easily and abundantly available as well as rich in carbohydrates (cellulose and hemicelluloses). Soda-anthraquinone method was used for pulp production as it is widely accepted for agro residues. Bleaching process during paper production is the chief source of wastewater generation. The chlorophenolic compounds generated during bleaching are highly toxic, mutagenic, and bioaccumulative in nature. The objectives of study were to use oxygen delignification (ODL) stage prior to elemental chlorine-free (ECF) bleaching to reduce wastewater load and to study its impact on bleached pulp characteristics. ODL stage prior to ECF bleaching improved the optical properties of pulp in comparison to only ECF bleaching. When ODL stage was incorporated prior to bleaching, the tensile index and folding endurance of the pulp were found to be 56.6 ± 1.5 Nm/g and 140, respectively, very high in comparison to ECF alone. A potential reduction of 51, 57, 43, and 53% in BOD 3 , COD, color, and AOX, respectively was observed on adding the ODL stage compared to ECF only. Generation of chlorophenolic compounds was reduced significantly. Incorporation of ODL stage prior to bleaching was found to be highly promising for reducing the toxicity of bleaching effluents and may lead to better management of nearby water resources. Graphical abstract ᅟ.

  6. Screening for Human Immunodeficiency Virus, Hepatitis B Virus, Hepatitis C Virus, and Treponema pallidum by Blood Testing Using a Bio-Flash Technology-Based Algorithm before Gastrointestinal Endoscopy.

    Science.gov (United States)

    Jun, Zhou; Zhen, Chen; QuiuLi, Zhang; YuanQi, An; Casado, Verónica Vocero; Fan, Yuan

    2016-12-01

    Currently, conventional enzyme immunoassays which use manual gold immunoassays and colloidal tests (GICTs) are used as screening tools to detect Treponema pallidum (syphilis), hepatitis B virus (HBV), hepatitis C virus (HCV), human immunodeficiency virus type 1 (HIV-1), and HIV-2 in patients undergoing surgery. The present observational, cross-sectional study compared the sensitivity, specificity, and work flow characteristics of the conventional algorithm with manual GICTs with those of a newly proposed algorithm that uses the automated Bio-Flash technology as a screening tool in patients undergoing gastrointestinal (GI) endoscopy. A total of 956 patients were examined for the presence of serological markers of infection with HIV-1/2, HCV, HBV, and T. pallidum The proposed algorithm with the Bio-Flash technology was superior for the detection of all markers (100.0% sensitivity and specificity for detection of anti-HIV and anti-HCV antibodies, HBV surface antigen [HBsAg], and T. pallidum) compared with the conventional algorithm based on the manual method (80.0% sensitivity and 98.6% specificity for the detection of anti-HIV, 75.0% sensitivity for the detection of anti-HCV, 94.7% sensitivity for the detection of HBsAg, and 100% specificity for the detection of anti-HCV and HBsAg) in these patients. The automated Bio-Flash technology-based screening algorithm also reduced the operation time by 85.0% (205 min) per day, saving up to 24 h/week. In conclusion, the use of the newly proposed screening algorithm based on the automated Bio-Flash technology can provide an advantage over the use of conventional algorithms based on manual methods for screening for HIV, HBV, HCV, and syphilis before GI endoscopy. Copyright © 2016 Jun et al.

  7. 3D Bio-Printing Review

    Science.gov (United States)

    Du, Xianbin

    2018-01-01

    Ultimate goal of tissue engineering is to replace pathological or necrotic body tissue or organ by artificial tissue or organ and tissue engineering is a very promising research field. 3D bio-printing is a kind of emerging technologies and a branch of tissue engineering. It has made significant progress in the past decade. 3D bio-printing can realize tissue and organ construction in vitro and has wide application in basic research and pharmacy. This paper is to make an analysis and review on 3D bio-printing from the perspectives of bioink, printing technology and technology application.

  8. Biosecurity--The Bio-Link Project.

    Science.gov (United States)

    Johnson, Elaine A.

    2002-01-01

    Describes Bio-Link, the Advanced Technological Education (ATE) Center for Biotechnology established with funding from the National Science Foundation (NSF). Reports that Bio-Link, headquartered at City College of San Francisco, has created a national network and resource base for community colleges, industry, and others interested in biotechnology…

  9. Novel bio-electro-Fenton technology for azo dye wastewater treatment using microbial reverse-electrodialysis electrolysis cell.

    Science.gov (United States)

    Li, Xiaohu; Jin, Xiangdan; Zhao, Nannan; Angelidaki, Irini; Zhang, Yifeng

    2017-03-01

    Development of sustainable technologies for treatment of azo dyes containing wastewaters has long been of great interest. In this study, we proposed an innovative concept of using microbial reverse-electrodialysis electrolysis cell (MREC) based Fenton process to treat azo dye wastewater. In such MREC-Fenton integrated process, the production of H 2 O 2 which is the key reactant of fenton-reaction was driven by the electrons harvested from the exoelectrogens and salinity-gradient between sea water and fresh water in MREC. Complete decolorization and mineralization of 400mgL -1 Orange G was achieved with apparent first order rate constants of 1.15±0.06 and 0.26±0.03h -1 , respectively. Furthermore, the initial concentration of orange G, initial solution pH, catholyte concentration, high and low concentration salt water flow rate and air flow rate were all found to significantly affect the dye degradation. This study provides an efficient and cost-effective system for the degradation of non-biodegradable pollutants. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Evaluation of the bleached human enamel by Scanning Electron Microscopy

    DEFF Research Database (Denmark)

    Miranda, Carolina Baptista; Pagani, Clovis; Benetti, Ana Raquel

    2005-01-01

    Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning...... analysis performing gold sputter coating under vacuum and were examined using 15kV at 500x and 2000x magnification. Results: Morphological alterations on the enamel surface were similarly detected after bleaching with either 35% carbamide peroxide or 35% hydrogen peroxide. Surface porosities were...... characteristic of an erosive process that took place on human enamel. Depression areas, including the formation of craters, and exposure of enamel rods could also be detected. Conclusion: Bleaching effects on enamel morphology were randomly distributed throughout enamel surface and various degrees of enamel...

  11. Bleaching of hydroentangled greige cotton nonwoven fabrics without scouring

    Science.gov (United States)

    This work investigated whether a hydroentangled greige cotton nonwoven fabric made at a relatively high hydroentangling water pressure, say, 135-bar, could be successfully bleached to attain the desired whiteness, absorbency and other properties without traditional scouring. Accordingly, the scoured...

  12. Thermal refugia against coral bleaching throughout the northern Red Sea

    KAUST Repository

    Osman, Eslam O.

    2017-10-17

    Tropical reefs have been impacted by thermal anomalies caused by global warming that induced coral bleaching and mortality events globally. However, there have only been very few recordings of bleaching within the Red Sea despite covering a latitudinal range of 15° and consequently it has been considered a region that is less sensitive to thermal anomalies. We therefore examined historical patterns of sea surface temperature (SST) and associated anomalies (1982–2012) and compared warming trends with a unique compilation of corresponding coral bleaching records from throughout the region. These data indicated that the northern Red Sea has not experienced mass bleaching despite intensive Degree Heating Weeks (DHW) of >15°C-weeks. Severe bleaching was restricted to the central and southern Red Sea where DHWs have been more frequent, but far less intense (DHWs <4°C-weeks). A similar pattern was observed during the 2015–2016 El Niño event during which time corals in the northern Red Sea did not bleach despite high thermal stress (i.e. DHWs >8°C-weeks), and bleaching was restricted to the central and southern Red Sea despite the lower thermal stress (DHWs < 8°C-weeks). Heat stress assays carried out in the northern (Hurghada) and central (Thuwal) Red Sea on four key reef-building species confirmed different regional thermal susceptibility, and that central Red Sea corals are more sensitive to thermal anomalies as compared to those from the north. Together, our data demonstrate that corals in the northern Red Sea have a much higher heat tolerance than their prevailing temperature regime would suggest. In contrast, corals from the central Red Sea are close to their thermal limits, which closely match the maximum annual water temperatures. The northern Red Sea harbours reef-building corals that live well below their bleaching thresholds and thus we propose that the region represents a thermal refuge of global importance.

  13. Effect of a New Bleaching Gel on Tooth Whitening

    Science.gov (United States)

    2016-05-12

    Effect of a New Bleaching Gel on Tooth Whitening Maj Tonya N. Barry APPROVED: Date APPROVED: Dean, Air Force Post aduate Dental School...UNIFORMED SERVICES UNIVERSITY OF THE HEALTH SCIENCES AIR FORCE POSTGRADUATE DENTAL SCHOOL 2450 Pepperrell Street Lackland AFB Texas, 78236-5345 http...reduced chair time and cost, high success rate, and safety of materials.6 2 Furthermore, bleaching teeth with 10% carbamide peroxide (the

  14. Bioética e avaliação tecnológica em saúde Bioethics and health care technology assessment

    Directory of Open Access Journals (Sweden)

    Fermin Roland Schramm

    2000-12-01

    Full Text Available A vigência simultânea do paradigma biotecnocientífico (que incentiva a incorporação tecnológica e da cultura dos limites (que seleciona as tecnologias constitui um grande desafio aos sistemas sanitários atuais, suscitando debates éticos e políticos sobre as escolhas a serem feitas. A avaliação tecnológica em saúde diz respeito à análise das conseqüências dos cuidados em saúde e das políticas de saúde, e apresenta pontos de interseção com a bioética, apesar de serem campos distintos. A importância das implicações éticas e sociais da avaliação tecnológica é cada vez mais reconhecida, mas a maioria das publicações tem enfatizado apenas os aspectos metodológicos e científicos. Existem vários tipos de interesses envolvidos na incorporação tecnológica, fontes de conflitos de valores. As implicações éticas incluem aquelas relativas aos ensaios clínicos para aferir sua eficácia; à avaliação da boa ou má prática médica; à forma de incorporar as novas tecnologias e à sua efetividade; ao acesso e à alocação de recursos disponíveis. A incorporação da dimensão ética na avaliação tecnológica possibilitará melhor compreensão da prática de saúde e um avanço em direção ao seu aprimoramento.The simultaneous existence of a biotechnoscientific paradigm (which emphasizes technological incorporation and a culture of limits (which selects technologies challenges current health systems, raising ethical and political discussions as to the choices to be made. Health care technology assessment is mainly concerned with the consequences of health care and health care policies. Thus, there is significant overlap between this activity and bioethics, even though they are different fields of knowledge. Although the importance of ethical and social issues arising in technology assessment has been recognized, most publications emphasize only methodological and scientific aspects. There are different interests

  15. Modeling bleaching of tomato derivatives at subzero temperatures.

    Science.gov (United States)

    Manzocco, Lara; Calligaris, Sonia; Nicoli, Maria Cristina

    2006-02-22

    This work was addressed to obtain a predictive model of the rate of bleaching in tomato derivatives at subzero temperatures. To this aim, a tomato puree was freeze-dried and equilibrated at increasing solid fractions. The bleaching rate was assessed by measuring tomato color during storage for up to 18 months at temperatures from -30 to 0 degrees C. The temperature dependence of the tomato-bleaching rate was neither predictable using the Arrhenius equation nor simply related to tomato physical state. The lack of a clear Arrhenius relation was attributed to the occurrence of temperature-dependent phenomena, such as ice crystallization and oxygen solubility modifications, which strongly changed the local concentration of reactants. A modified Arrhenius equation predicting the tomato-bleaching rate in the entire temperature range was proposed. Tomato concentration, and hence its physical state, affected the temperature dependence of bleaching, modifying apparent activation energy and frequency factor of the modified Arrhenius equation. In light of these considerations, a mathematical model was set up and validated to accurately predict the tomato-bleaching rate on the basis of only its concentration and storage temperature.

  16. PacBio But Not Illumina Technology Can Achieve Fast, Accurate and Complete Closure of the High GC, Complex Burkholderia pseudomallei Two-Chromosome Genome

    Directory of Open Access Journals (Sweden)

    Jade L. L. Teng

    2017-08-01

    Full Text Available Although PacBio third-generation sequencers have improved the read lengths of genome sequencing which facilitates the assembly of complete genomes, no study has reported success in using PacBio data alone to completely sequence a two-chromosome bacterial genome from a single library in a single run. Previous studies using earlier versions of sequencing chemistries have at most been able to finish bacterial genomes containing only one chromosome with de novo assembly. In this study, we compared the robustness of PacBio RS II, using one SMRT cell and the latest P6-C4 chemistry, with Illumina HiSeq 1500 in sequencing the genome of Burkholderia pseudomallei, a bacterium which contains two large circular chromosomes, very high G+C content of 68–69%, highly repetitive regions and substantial genomic diversity, and represents one of the largest and most complex bacterial genomes sequenced, using a reference genome generated by hybrid assembly using PacBio and Illumina datasets with subsequent manual validation. Results showed that PacBio data with de novo assembly, but not Illumina, was able to completely sequence the B. pseudomallei genome without any gaps or mis-assemblies. The two large contigs of the PacBio assembly aligned unambiguously to the reference genome, sharing >99.9% nucleotide identities. Conversely, Illumina data assembled using three different assemblers resulted in fragmented assemblies (201–366 contigs, sharing only 92.2–100% and 92.0–100% nucleotide identities to chromosomes I and II reference sequences, respectively, with no indication that the B. pseudomallei genome consisted of two chromosomes with four copies of ribosomal operons. Among all assemblies, the PacBio assembly recovered the highest number of core and virulence proteins, and housekeeping genes based on whole-genome multilocus sequence typing (wgMLST. Most notably, assembly solely based on PacBio outperformed even hybrid assembly using both PacBio and Illumina

  17. Bio-diesel: A candidate for a Nigeria energy mix

    International Nuclear Information System (INIS)

    Eze, T.; Dim, L. A.; Funtua, I. I.; Oladipo, M. O. A.

    2011-01-01

    This paper presents a review of bio-diesel development and economic potentials. The basics of biodiesel and its production technology are described. Attention is given to development potential, challenges and prospests of bio-diesel in Nigeria with ground facts on bio-diesel production feasibility in Nigeria highlighted.

  18. A primary estimation of PCDD/Fs release reduction from non-wood pulp and paper industry in China based on the investigation of pulp bleaching with chlorine converting to chlorine dioxide.

    Science.gov (United States)

    Xiao, Qingcong; Song, Xiaoqian; Li, Wenchao; Zhang, Yuanna; Wang, Hongchen

    2017-10-01

    Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13-0.8 ng TEQ kg -1 , and 0.15-1.9 pg TEQ L -1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t -1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. 'Ethnic cleansing' bleaches the atrocities of genocide.

    Science.gov (United States)

    Blum, Rony; Stanton, Gregory H; Sagi, Shira; Richter, Elihu D

    2008-04-01

    Genocide has been the leading cause of preventable violent death in the 20th-21st century, taking even more lives than war. The term 'ethnic cleansing' is used as a euphemism for genocide despite it having no legal status. Like 'Judenrein' and 'racial hygiene' in Nazi medicine, it expropriates pseudo-medical terminology to justify massacre. Use of the term reifies a dehumanized view of the victims as sources of filth and disease, and propagates the reversed social ethics of the perpetrators. Timelines for recent genocides (Bosnia, 1991-1996, 200,000; Kosovo 1998-2000, 10,000-20,000; Rwanda, 1994, 800,000; Darfur 2002-2006, >400,000) show that its use bears no relationship to death tolls or the scale of atrocity. Bystanders' use of the term 'ethnic cleansing' signals the lack of will to stop genocide, resulting in huge increases in deaths, and undermines international legal obligations to acknowledge genocide. The term 'ethnic cleansing' corrupts observation, interpretation, ethical judgment and decision-making, thereby undermining the aim of public health. Public health should lead the way in expunging the term 'ethnic cleansing' from official use. 'Ethnic cleansing' bleaches the atrocities of genocide, leading to inaction in preventing current and future genocides.

  20. Clinical Evaluation of Genotoxicity of In-office Bleaching.

    Science.gov (United States)

    Rezende, M; De Geus, J L; Loguercio, A D; Reis, A; Kossatz, D

    The aim of this study was to evaluate the genotoxicity of in-office bleaching with 35% hydrogen peroxide in epithelial cells from the gingival and lip tissues. Thirty volunteers with central incisors shade A1 or darker were selected for this study. The gingival tissue of the teeth to be bleached was isolated with a light-polymerized resin dam, and the 35% hydrogen peroxide gel was administered during three 15-minute applications over the course of the 45-minute application period. Two bleaching sessions with a one-week interval in between were performed. Exfoliated oral mucosa gingival epithelial cells and upper lip lining were collected at baseline and one month after the in-office dental bleaching. The scraped cells were placed on clean glass slides and smears were prepared. After staining with Giemsa solution, two blinded examiners performed cell and micronuclei counts under a 100× optical microscope. Tooth sensitivity was evaluated using the Visual Analogue Scale (VAS). Shade evaluation was recorded before and one month after the bleaching treatment with the value-oriented shade guide Vita Bleachedguide 3D-MASTER and the spectrophotometer Vita Easyshade. Data from the shade guide units and the micronuclei (MN) frequency were subjected to a Mann-Whitney test (α=0.05). The overall difference between before and one month after the bleaching treatment (ΔE and ΔSGU), absolute risk, and intensity of tooth sensitivity (TS) were calculated, as was the 95% confidence interval (CI). The frequency of MN was not increased after bleaching with 35% hydrogen peroxide in both study groups (p>0.05). The absolute risk of TS of the participants was 93% (95% CI, 79%-98%), with a mean VAS intensity of 5.7 ± 2.9 (95% CI, 4.6-6.8). Meaningful whitening was observed after bleaching. The change in shade guide units in the Bleachedguide 3D-MASTER was 2.3 ± 1.4. In terms of ΔE, the change in color was 7.7 ± 3.5. The in-office bleaching did not induce DNA damage to the gingival

  1. Quantifying bleaching for zero-age fluvial sediment: A Bayesian approach

    International Nuclear Information System (INIS)

    Cunningham, Alastair C.; Evans, Mary; Knight, Jasper

    2015-01-01

    Luminescence dating of sediment requires the sand grains to have been exposed to sunlight prior to their most recent burial. Under fluvial transport, the amount of sunlight exposure may not always be sufficient to reset the luminescence signal, a phenomenon known as ‘partial bleaching'. The extent of bleaching is dependent on a combination of geomorphic, sedimentological and fluvial processes. If bleaching can be quantified, and the relationship with these processes understood, it could potentially be used as a new environmental proxy for changes in the dynamics of river systems. Here, we use a recently developed statistical model to evaluate the extent of bleaching, by inferring the proportion of well-bleached grains in the small-aliquot population. We sampled low-flow and flood deposits at a single site on the River Sabie, South Africa. We show that the low-flow sediment is almost perfectly bleached (>80% of grains well bleached), while sediment at flood elevations is partially bleached (20–70 % of grains well bleached). The degree of bleaching may show a relationship with flood magnitude as defined by elevation above normal river level, and we speculate on the causes of variability in bleaching between flood samples. - Highlights: • We sampled modern river sediment from low-flow and flood elevations. • The unbleached OSL dose was measured. • Bayesian methods can estimate the proportion of well-bleached grains. • Low-flow sediments are well bleached; flood deposits are poorly bleached.

  2. Bio-politics Reflexes” or something about what happens with Bio-politics today

    OpenAIRE

    Viorella Manolache

    2013-01-01

    Under the pressure dictated by Western modernity movements, life finally enters within strategic (long term) relationships circuit. The present study establishes that, bio-politics and bio-power denounces the paradigm of politicization of the biological life. Foucaults late writings confirm the subordination of bio-politics to the technologies of power, which integrate / reduce life to biological continuity of the species, to the objectification of individual body or investigation of self-tec...

  3. Application of 1D and 2D MFR reactor technology for the isolation of insecticidal and anti-microbial properties from pyrolysis bio-oils.

    Science.gov (United States)

    Hossain, Mohammad M; Scott, Ian M; Berruti, Franco; Briens, Cedric

    2016-12-01

    Valuable chemicals can be separated from agricultural residues by chemical or thermochemical processes. The application of pyrolysis has already been demonstrated as an efficient means to produce a liquid with a high concentration of desired product. The objective of this study was to apply an insect and microorganism bioassay-guided approach to separate and isolate pesticidal compounds from bio-oil produced through biomass pyrolysis. Tobacco leaf (Nicotianata bacum), tomato plant (Solanum lycopersicum), and spent coffee (Coffea arabica) grounds were pyrolyzed at 10°C/min from ambient to 565°C using the mechanically fluidized reactor (MFR). With one-dimensional (1D) MFR pyrolysis, the composition of the product vapors varied as the reactor temperature was raised allowing for the selection of the temperature range that corresponds to vapors with a high concentration of pesticidal properties. Further product separation was performed in a fractional condensation train, or 2D MFR pyrolysis, thus allowing for the separation of vapor components according to their condensation temperature. The 300-400°C tobacco and tomato bio-oil cuts from the 1D MFR showed the highest insecticidal and anti-microbial activity compared to the other bio-oil cuts. The 300-350 and 350-400°C bio-oil cuts produced by 2D MFR had the highest insecticidal activity when the bio-oil was collected from the 210°C condenser. The tobacco and tomato bio-oil had similar insecticidal activity (LC 50 of 2.1 and 2.2 mg/mL) when the bio-oil was collected in the 210°C condenser from the 300-350°C reactor temperature gases. The 2D MFR does concentrate the pesticidal products compared to the 1D MFR and thus can reduce the need for further separation steps such as solvent extraction.

  4. Tooth Whitening And Temperature Rise With Two Bleaching Activation Methods

    Science.gov (United States)

    Abu-ElMagd, D. M.; El-Sayad, I. I.; Abd El-Gawad, L. M.

    2009-09-01

    To measure the tooth whitening and the surface and Intrapulpal temperature increase in vitro on freshly extracted upper human central incisors after chemical, Zoom AP light and diode laser activated bleaching. Thirty caries-free upper human incisors were selected. Teeth were divided into three equal groups according to the methods of activation of the bleaching agent (n = 10). A whitening gel containing hydrogen peroxide was applied to the buccal surface of all teeth. Group I was bleached using chemically activated hydrogen peroxide gel, for three applications of 15 min each. Group II was bleached with high intensity advanced power Zoom activation light (Zoom AP), for three applications of 15 min each. Group III was bleached with diode laser activation technique, where the teeth were irradiated with 2 Watt diode laser for three applications of 30 sec each. The whitening degree was assessed using an image analysis system, while temperature rise was recorded using a thermocouple on the external tooth surface and Intrapulpal. The degree of whitening increased significantly in all groups. However, the percentage of whitening was not statistically significantly different between the three groups. In addition, group II showed statistically significant higher mean rise in both surface and pulp temperatures than group I and group III. Chemical bleaching produces the same whitening effect as Zoom AP light and laser, with no surface or pulpal temperature rise. Laser application is faster and produces less surface and pulp temperature increase than Zoom AP light. Diode laser used to activate bleaching gels is not considered dangerous to the vitality of dental pulp using power settings of 2 W.

  5. Coral Bleaching Assessment Through Remote Sensing and Integrated Citizen Science (CoralBASICS): Engaging Dive Instructors on Reef Characterization in Southwest, Puerto Rico Coupled with the Analysis of Water Quality Using NASA Earth Observations

    Science.gov (United States)

    Torres-Perez, J. L.; Armstrong, R.; Detres, Y.; Aragones-Fred, C.; Melendez, J.

    2017-12-01

    As recurrences of extreme sea water thermal events increase with climate change, the need for continuous monitoring of coral reefs becomes even more evident. Enabling properly trained members from the local communities to actively participate in scientific programs/research projects, provides for such monitoring at little cost once the citizens are properly trained and committed. Further, the possibility of obtaining high temporal resolution data with citizen scientists can provide for new venues to answer questions that may not be answered with traditional research approaches. The CoralBASICS project engages members of the local diving industry in Puerto Rico on the assessment of coastal water quality and the status of Puerto Rico's coral reefs in an age of climate change and in particular, an increase in the frequency and magnitude of coral bleaching events. The project complements remote sensing data with community-based field assessments strictly supervised by the PI's. The study focuses on training citizen scientists (dive instructors) on the collection of benthic information related to the state of coral reefs using the Reef Check (fish and invertebrates ID and substrate composition) and video transects methodologies, monitoring of coral bleaching events, and collecting of water quality data using a smartphone ocean color application. The data collected by citizen scientists complements the validation of Landsat-8 (OLI) imagery for water quality assessment. At the same time, researchers from the University of Puerto Rico conduct field assessment of the bio-optical properties of waters surrounding the coral reef study areas. Dive instructors have been collecting benthic and water quality data for the past 4 months. Initial analysis using the Coral Point Count with excel extension (CPCe) software showed a dominance of gorgonians at most sites (up to 32.8%) with hard coral cover ranging between 5.5-13.2% of the hard substrates. No coral diseases or bleaching

  6. Anaerobic biodegradability and toxicity of wastewaters from chlorine and total chlorine-free bleaching of eucalyptus kraft pulps.

    NARCIS (Netherlands)

    Vidal, G.; Soto, M.; Field, J.; Mendez-Pampin, R.; Lema, J.M.

    1997-01-01

    Chlorine bleaching effluents are problematic for anaerobic wastewater treatment due to their high methanogenic toxicity and low biodegradability. Presently, alternative bleaching processes are being introduced, such as elemental chlorine-free (ECF) and total chlorine-free (TCF) bleaching. The

  7. Bio-nanopatterning of Surfaces

    Directory of Open Access Journals (Sweden)

    Yeung Chun

    2007-01-01

    Full Text Available AbstractBio-nanopatterning of surfaces is a very active interdisciplinary field of research at the interface between biotechnology and nanotechnology. Precise patterning of biomolecules on surfaces with nanometre resolution has great potential in many medical and biological applications ranging from molecular diagnostics to advanced platforms for fundamental studies of molecular and cell biology. Bio-nanopatterning technology has advanced at a rapid pace in the last few years with a variety of patterning methodologies being developed for immobilising biomolecules such as DNA, peptides, proteins and viruses at the nanoscale on a broad range of substrates. In this review, the status of research and development are described, with particular focus on the recent advances on the use of nanolithographic techniques as tools for biomolecule immobilisation at the nanoscale. Present strengths and weaknesses, as well future challenges on the different nanolithographic bio-nanopatterning approaches are discussed.

  8. Fiscal 1998 research report. Survey on R and D, and application technology of biotechnology; 1998 nendo chosa hokokusho. Bio technology no kenkyu kaihatsu, sangyoka gijutsu nado ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Survey was made mainly on use of biotechnology as resource saving and energy saving processes. Biotechnology is in wide use in a pharmaceutical field, while its application is on the increase in agriculture, food, chemistry, energy and environment fields. The USA is ahead of Japan and Europe. In the USA, there are more than 1000 ventures, and R and D of biotechnology, in particular, gene analysis and manipulation techniques are in progress together with acquisition of patents. In biomass energy, production of ethanol from corn, and development of biodiesel are in progress in the USA and Europe, respectively. Use of biomass should be promoted because of its global environment compatibility and sustainable productivity. In the future bio-market, genome analysis and its application are most important, however, Japan is behind in such technology in the world. The Joint approach by industry, university and government is necessary from the viewpoint of a future marketability and international competitiveness. Promotion of a public acceptance and nurture of creative talents are also important. (NEDO)

  9. AFM analysis of bleaching effects on dental enamel microtopography

    Energy Technology Data Exchange (ETDEWEB)

    Pedreira de Freitas, Ana Carolina, E-mail: anacarolfreitas@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Cardoso Espejo, Luciana, E-mail: luespejo@hotmail.com [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Brossi Botta, Sergio, E-mail: sbbotta@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Sa Teixeira, Fernanda de, E-mail: nandast@if.usp.br [Laboratorio de Filmes Finos, Instituto de Fisica da Universidade de Sao Paulo, Rua do Matao, Travessa R, 187 - Cidade Universitaria, CEP 05314-970, Sao Paulo (Brazil); Cerqueira, Luz Maria Aparecida A., E-mail: maacluz@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Garone-Netto, Narciso, E-mail: ngarone@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Bona Matos, Adriana, E-mail: bona@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Barbosa da Silveira Salvadori, Maria Cecilia, E-mail: mcsalva@if.usp.br [Laboratorio de Filmes Finos, Instituto de Fisica da Universidade de Sao Paulo, Rua do Matao, Travessa R, 187 - Cidade Universitaria, CEP 05314-970, Sao Paulo (Brazil)

    2010-02-15

    The purpose of this in vitro study was to test a new methodology to evaluate the effects of 35% hydrogen peroxide agent on the microtopography of sound enamel using an atomic force microscope (AFM). The buccal sound surfaces of three extracted human lower incisors were used, without polishing the surfaces to maintain them with natural morphology. These unpolished surfaces were subjected to bleaching procedure with 35% hydrogen peroxide that consisted of 4 applications of the bleaching agent on enamel surfaces for 10 min each application. Surface images were obtained in a 15 {mu}m x 15 {mu}m area using an AFM. The roughness (Ra and RMS) and the power spectral density (PSD) were obtained before and after the bleaching treatment. As results we could inquire that the PSD analyses were very suitable to identifying the morphological changes on the surfaces, while the Ra and RMS parameters were insufficient to represent the morphological alterations promoted by bleaching procedure on enamel. The morphological wavelength in the range of visible light spectrum (380-750 nm) was analyzed, showing a considerable increase of the PSD with the bleaching treatment.

  10. Bacteria associated with the bleached and cave coral Oculina patagonica.

    Science.gov (United States)

    Koren, Omry; Rosenberg, Eugene

    2008-04-01

    The relative abundance of bacteria in the mucus and tissues of Oculina patagonica taken from bleached and cave (azooxanthellae) corals was determined by analyses of the 16S rRNA genes from cloned libraries of extracted DNA and from isolated colonies. The results were compared to previously published data on healthy O. patagonica. The bacterial community of bleached, cave, and healthy corals were completely different from each other. A tight cluster (>99.5% identity) of bacteria, showing 100% identity to Acinetobacter species, dominated bleached corals, comprising 25% of the 316 clones sequenced. The dominant bacterial cluster found in cave corals, representing 29% of the 97 clones sequenced, showed 98% identity to an uncultured bacterium from the Great Barrier Reef. Vibrio splendidus was the most dominant species in healthy O. patagonica. The culturable bacteria represented 0.1-1.0% of the total bacteria (SYBR Gold staining) of the corals. The most abundant culturable bacteria in bleached, cave, and healthy corals were clusters that most closely matched Microbulbifer sp., an alpha-proteobacterium previously isolated from healthy corals and an alpha-protobacterium (AB026194), respectively. Three generalizations emerge from this study on O. patagonica: (1) More bacteria are associated with coral tissue than mucus; (2) tissue and mucus populations are different; (3) bacterial populations associated with corals change dramatically when corals lack their symbiotic zooxanthellae, either as a result of the bleaching disease or when growing in the absence of light.

  11. The Problem of Bio-Concepts: Biopolitics, Bio-Economy and the Political Economy of Nothing

    Science.gov (United States)

    Birch, Kean

    2017-01-01

    Scholars in science and technology studies--and no doubt other fields--have increasingly drawn on Michel Foucault's concept of biopolitics to theorize a variety of new "bio-concepts." While there might be some theoretical value in such exercises, many of these bio-concepts have simply replaced more rigorous--and therefore…

  12. Bleach gel: a simple agarose gel for analyzing RNA quality.

    Science.gov (United States)

    Aranda, Patrick S; LaJoie, Dollie M; Jorcyk, Cheryl L

    2012-01-01

    RNA-based applications requiring high-quality, non-degraded RNA are a foundational element of many research studies. As such, it is paramount that the integrity of experimental RNA is validated prior to cDNA synthesis or other downstream applications. In the absence of expensive equipment such as microfluidic electrophoretic devices, and as an alternative to the costly and time-consuming standard formaldehyde gel, RNA quality can be quickly analyzed by adding small amounts of commercial bleach to TAE buffer-based agarose gels prior to electrophoresis. In the presence of low concentrations of bleach, the secondary structure of RNA is denatured and potential contaminating RNases are destroyed. Because of this, the 'bleach gel' is a functional approach that addresses the need for an inexpensive and safe way to evaluate RNA integrity and will improve the ability of researchers to rapidly analyze RNA quality. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Anaphylaxis, contact urticaria, and allergic asthma caused by persulfates in hair bleaching products

    NARCIS (Netherlands)

    Hoekstra, Miriam; Schuttelaar, M.L.; Coenraads, P.J.

    2010-01-01

    Background: Persulfate salts are potent oxidizing agents in hair bleach products that accelerate the bleaching process. Ammonium and potassium persulfates may cause delayedtype and immediate skin reactions. Also allergic asthma and rhinitis have been described. Objectives: Ammonium and potassium

  14. Effect of bleaching on the microhardness of tooth-colored restorative materials

    Directory of Open Access Journals (Sweden)

    Abdolrahim Davari

    2013-08-01

    Full Text Available   Background and Aims: Bleaching agents not only affect the tooth structure, but also may alter the properties of restorative materials. The aim of this in vitro study was to evaluate the effect of different bleaching regimens on the microhardness of four tooth-colored restorative materials.   Materials and Methods: Eighty specimens of four restorative materials (Microhybrid resin composite (Z250 (3M, ESPE, nanohybrid composite Z350 (3M, ESPE, packable composite P60 (3M, ESPE, and resin modified glass ionomer Vitremer (3M, ESPE were fabricated and were polished after 24 h with Soflex discs (3M,ESPE. Then the specimens were divided into two groups: In office bleach group, 40 specimens (10 of each restorative material were bleached with hydrogen peroxide 37.5% for 30 min in two sessions with 7 days interval. In home bleaching group, 40 specimens were bleached with carbamid peroxide 22%, 6 h a day for 14 days. Vickers microhardness test were done before and after bleaching (baseline. Finally data were evaluated using analysis of Variance.   Results: Two bleaching regimens were significantly decreased the microhardness values. In Z250 resin composite, the microhardness values before and after bleaching were 95.30 and 92.67 kg/mm2, respectively. for office bleaching (P=0.011 and 95.38 and 92.39 kg/mm2 for home bleaching (P<0.001. In Z350 resin composite, the microhardness values before and after bleaching were 98.29 and 92.41 kg/mm2, for office bleaching (P<0.001 and 97.35 and 93.44 kg/mm2 for home bleaching (P<0.001 respectively. In P60 resin composite, the microhardness values before and after bleaching were 103.10 and 96.16 kg/mm2, respectively. for office bleaching (P=0.045 and 102.61 and 98.16 kg/mm2 for home bleaching (P=0.001. In resin modified glass ionomer (Vitremer, the microhardness values before and after bleaching were 56.79 and 49.41 kg/mm2, respectively. for office bleaching (P=0.004 and 54.17 and 46.50 kg/mm2 for home bleaching (P

  15. Environmental Drivers of Variation in Bleaching Severity of Acropora Species during an Extreme Thermal Anomaly

    OpenAIRE

    Mia O. Hoogenboom; Mia O. Hoogenboom; Grace E. Frank; Grace E. Frank; Tory J. Chase; Tory J. Chase; Saskia Jurriaans; Saskia Jurriaans; Mariana Álvarez-Noriega; Mariana Álvarez-Noriega; Katie Peterson; Kay Critchell; Kathryn L. E. Berry; Kathryn L. E. Berry; Kathryn L. E. Berry

    2017-01-01

    High sea surface temperatures caused global coral bleaching during 2015–2016. During this thermal stress event, we quantified within- and among-species variability in bleaching severity for critical habitat-forming Acropora corals. The objective of this study was to understand the drivers of spatial and species-specific variation in the bleaching susceptibility of these corals, and to evaluate whether bleaching susceptibility under extreme thermal stress was consistent with that observed duri...

  16. Remote Sensing of Coral Bleaching Using Temperature and Light: Progress towards an Operational Algorithm

    OpenAIRE

    William Skirving; Susana Enríquez; John D. Hedley; Sophie Dove; C. Mark Eakin; Robert A. B. Mason; Jacqueline L. De La Cour; Gang Liu; Ove Hoegh-Guldberg; Alan E. Strong; Peter J. Mumby; Roberto Iglesias-Prieto

    2017-01-01

    The National Oceanic and Atmospheric Administration’s Coral Reef Watch program developed and operates several global satellite products to monitor bleaching-level heat stress. While these products have a proven ability to predict the onset of most mass coral bleaching events, they occasionally miss events; inaccurately predict the severity of some mass coral bleaching events; or report false alarms. These products are based solely on temperature and yet coral bleaching is known to result from...

  17. Climatological context for large-scale coral bleaching

    Science.gov (United States)

    Barton, A. D.; Casey, K. S.

    2005-12-01

    Large-scale coral bleaching was first observed in 1979 and has occurred throughout virtually all of the tropics since that time. Severe bleaching may result in the loss of live coral and in a decline of the integrity of the impacted coral reef ecosystem. Despite the extensive scientific research and increased public awareness of coral bleaching, uncertainties remain about the past and future of large-scale coral bleaching. In order to reduce these uncertainties and place large-scale coral bleaching in the longer-term climatological context, specific criteria and methods for using historical sea surface temperature (SST) data to examine coral bleaching-related thermal conditions are proposed by analyzing three, 132 year SST reconstructions: ERSST, HadISST1, and GISST2.3b. These methodologies are applied to case studies at Discovery Bay, Jamaica (77.27°W, 18.45°N), Sombrero Reef, Florida, USA (81.11°W, 24.63°N), Academy Bay, Galápagos, Ecuador (90.31°W, 0.74°S), Pearl and Hermes Reef, Northwest Hawaiian Islands, USA (175.83°W, 27.83°N), Midway Island, Northwest Hawaiian Islands, USA (177.37°W, 28.25°N), Davies Reef, Australia (147.68°E, 18.83°S), and North Male Atoll, Maldives (73.35°E, 4.70°N). The results of this study show that (1) The historical SST data provide a useful long-term record of thermal conditions in reef ecosystems, giving important insight into the thermal history of coral reefs and (2) While coral bleaching and anomalously warm SSTs have occurred over much of the world in recent decades, case studies in the Caribbean, Northwest Hawaiian Islands, and parts of other regions such as the Great Barrier Reef exhibited SST conditions and cumulative thermal stress prior to 1979 that were comparable to those conditions observed during the strong, frequent coral bleaching events since 1979. This climatological context and knowledge of past environmental conditions in reef ecosystems may foster a better understanding of how coral reefs will

  18. Reducing bleaching effects in organic nanofibers by coating

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter

    Para-hexaphenylene (p-6P) organic nanofibers emit polarized, blue light upon UV excitation with a peak wavelength of the emitted light of 425 nm [1] and a spatially anisotropic distribution of the emitted light [2]. These features could enable future (opto-)electronic applications [3], since......, we present results of systematic bleaching experiments, in which we have investigated diverse mono- and multilayer coating materials. It is found that the most promising combination results in a significant reduction of bleaching without affecting significantly the emission spectrum....

  19. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

    Directory of Open Access Journals (Sweden)

    Salwa Omar Bajunaid

    2016-01-01

    Conclusions: Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

  20. Effectiveness of bleaching agent on composite resin discoloration

    Directory of Open Access Journals (Sweden)

    Galih Sampoerno

    2012-03-01

    Full Text Available Background: The discoloration of teeth, especially anterior teeth, is one of aesthetic problems. The use of tooth bleaching agents for discolored natural teeth is becoming increasingly popular. Many dentists, however, get many problems when they conduct bleaching process since there is much composite filling on patient’s anterior teeth. Although many research have focused on the discoloration of composite resin after bleaching process, the problem still becomes debatable. Purpose: The purpose of this study was to investigate the difference of the discoloration between hybrid composite and nano composite before and after the application of tooth bleaching agent, 38% hydrogen peroxide. Methods: Eighteen disk-shaped specimens (5 mm of each of two composite resins, hybrid and nano filler, were prepared. The each group was treated 3 times and the specimens were divided into two groups consisted of 9 specimens for each, and then immersed in black tea solutions for 72 hours. Next, after having staining and bleaching processes, the color of the specimens was measured with a optic spectrophotometer by using photo with type BPY-47 and digital microvolt. The differences of the light intensity among three measurements were then calculated. Afterwards, GLM MANOVA Repeated Measure and parametric analysis (Independent t-test and Paired t-test were then used to analyze the data. Results: After staining process, it is then known that the nano composite had more discoloration and more affected by the black tea solution than the hybrid one. Conclusion: After bleaching, the discoloration was finally removed completely from both hybride and nano filler composite resins and became brighter from the baseline color.Latar belakang: Salah satu problem estetik adalah adanya perubahan warna pada gigi anterior. Peningkatan pemakaian bahan bleaching semakin popular. Banyak dokter gigi mempunyai problem ketika mereka akan melakukan proses bleaching dan ditemukan banyak

  1. Bio-fuel production potential in Romania

    International Nuclear Information System (INIS)

    Laurentiu, F.; Silvian, F.; Dumitru, F.

    2006-01-01

    The paper is based on the ESTO Study: Techno- Economic Feasibility of Large-Scale Production of Bio-Fuels in EU-Candidate Countries. Bio-fuel production has not been taken into account significantly until now in Romania, being limited to small- scale productions of ethanol, used mostly for various industrial purposes. However the climatic conditions and the quality of the soil are very suitable in the country for development of the main crops (wheat, sugar-beet, sunflower and rape-seed) used in bio-ethanol and bio-diesel production. The paper intended to consider a pertinent discussion of the present situation in Romania's agriculture stressing on the following essential items in the estimation of bio-fuels production potential: availability of feed-stock for bio-fuel production; actual productions of bio-fuels; fuel consumption; cost assessment; SWOT approach; expected trends. Our analysis was based on specific agricultural data for the period 1996-2000. An important ethanol potential (due to wheat, sugar-beet and maize cultures), as well as bio-diesel one (due to sun-flower and rape-seed) were predicted for the period 2005-2010 which could be exploited with the support of an important financial and technological effort, mainly from EU countries

  2. IA of bio-economic projects in Region Zealand, Denmark

    DEFF Research Database (Denmark)

    Lybæk, Rikke; Kjær, Tyge; Palsberg, Aske

    Creating new pathways for sustainable ready-to-implement bio-economic projects within Region Zealand, Denmark, based on available biomass resources and existing and proven technology concepts.......Creating new pathways for sustainable ready-to-implement bio-economic projects within Region Zealand, Denmark, based on available biomass resources and existing and proven technology concepts....

  3. The 3rd DBCLS BioHackathon

    DEFF Research Database (Denmark)

    Katayama, Toshiaki; Wilkinson, Mark D; Micklem, Gos

    2013-01-01

    ABSTRACT: BACKGROUND: BioHackathon 2010 was the third in a series of meetings hosted by the Database Center for Life Sciences (DBCLS) in Tokyo, Japan. The overall goal of the BioHackathon series is to improve the quality and accessibility of life science research data on the Web by bringing...... for analysis and visualization. CONCLUSION: We provide a meeting report from BioHackathon 2010, in which we describe the discussions, decisions, and breakthroughs made as we moved towards compliance with Semantic Web technologies - from source provider, through middleware, to the end-consumer....

  4. Branding the bio/biomedical engineering degree.

    Science.gov (United States)

    Voigt, Herbert F

    2011-01-01

    The future challenges to medical and biological engineering, sometimes referred to as biomedical engineering or simply bioengineering, are many. Some of these are identifiable now and others will emerge from time to time as new technologies are introduced and harnessed. There is a fundamental issue regarding "Branding the bio/biomedical engineering degree" that requires a common understanding of what is meant by a B.S. degree in Biomedical Engineering, Bioengineering, or Biological Engineering. In this paper we address some of the issues involved in branding the Bio/Biomedical Engineering degree, with the aim of clarifying the Bio/Biomedical Engineering brand.

  5. Taxonomic, Spatial and Temporal Patterns of Bleaching in Anemones Inhabited by Anemonefishes

    KAUST Repository

    Hobbs, Jean-Paul A.

    2013-08-08

    Background:Rising sea temperatures are causing significant destruction to coral reef ecosystems due to coral mortality from thermally-induced bleaching (loss of symbiotic algae and/or their photosynthetic pigments). Although bleaching has been intensively studied in corals, little is known about the causes and consequences of bleaching in other tropical symbiotic organisms.Methodology/Principal Findings:This study used underwater visual surveys to investigate bleaching in the 10 species of anemones that host anemonefishes. Bleaching was confirmed in seven anemone species (with anecdotal reports of bleaching in the other three species) at 10 of 19 survey locations spanning the Indo-Pacific and Red Sea, indicating that anemone bleaching is taxonomically and geographically widespread. In total, bleaching was observed in 490 of the 13,896 surveyed anemones (3.5%); however, this percentage was much higher (19-100%) during five major bleaching events that were associated with periods of elevated water temperatures and coral bleaching. There was considerable spatial variation in anemone bleaching during most of these events, suggesting that certain sites and deeper waters might act as refuges. Susceptibility to bleaching varied between species, and in some species, bleaching caused reductions in size and abundance.Conclusions/Significance:Anemones are long-lived with low natural mortality, which makes them particularly vulnerable to predicted increases in severity and frequency of bleaching events. Population viability will be severely compromised if anemones and their symbionts cannot acclimate or adapt to rising sea temperatures. Anemone bleaching also has negative effects to other species, particularly those that have an obligate relationship with anemones. These effects include reductions in abundance and reproductive output of anemonefishes. Therefore, the future of these iconic and commercially valuable coral reef fishes is inextricably linked to the ability of host

  6. Bioengineered Textiles and Nonwovens – the convergence of bio-miniaturisation and electroactive conductive polymers for assistive healthcare, portable power and design-led wearable technology

    OpenAIRE

    Oliver, Raymond; Tillotson, Jennifer; Toomey, Anne

    2009-01-01

    Today, there is an opportunity to bring together creative design activities to exploit the responsive and adaptive ‘smart’ materials that are a result of rapid development in electro, photo active polymers or OFEDs (organic thin film electronic devices), bio-responsive hydrogels, integrated into MEMS/NEMS devices and systems respectively. Some of these integrated systems are summarised in this paper, highlighting their use to create enhanced functionality in textiles, fabrics and non-woven la...

  7. Coral bleaching and associated mortality in Mayotte, Western Indian ...

    African Journals Online (AJOL)

    Manta tows in fringing and barrier reef areas, together with observations, were used to estimate the extent of the bleaching and associated coral mortality in Mayotte between 1 and 24 of May 2010. Three areas around the island were surveyed. The results from fringing reefs in the north coast of Mayotte showed that nearly ...

  8. Photo-bleaching of polymer discoloration caused by quinone methides

    Czech Academy of Sciences Publication Activity Database

    Pospíšil, Jan; Nešpůrek, Stanislav; Zweifel, H.; Kuthan, J.

    2002-01-01

    Roč. 78, č. 2 (2002), s. 251-255 ISSN 0141-3910 R&D Projects: GA AV ČR IAA1050901 Institutional research plan: CEZ:AV0Z4050913 Keywords : quinone methide * photo-bleaching * polymer discoloration Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.145, year: 2002

  9. Assessing Coral Community Recovery from Coral Bleaching by ...

    African Journals Online (AJOL)

    The densities of small colonies were lowest at the northern sites, and small colonies of genera of corals that suffered from high bleaching and mortality during the El Niño Southern Oscillation in 1998 were less abundant in the north. These northern reefs are relatively isolated from sources of coral larvae from reefs in the ...

  10. Bleaching and/or porcelain veneers: case reports.

    Science.gov (United States)

    Putter, H

    1992-01-01

    Four case studies are presented in which the concept that bleaching, porcelain veneer restorations, or a combination of both constitute a conservative treatment approach for discolored, malformed, malaligned, and worn dentition. These treatments can be used effectively not only for aging dentitions, but also for the very young, which makes them an attractive treatment modality.

  11. Chlorine bleaches - A significant long term source of mercury pollution

    Science.gov (United States)

    Siegel, S. M.; Eshleman, A.

    1975-01-01

    Products of industrial electrolysis of brine - NaOCl-based bleaches and NaOH - yielded 17 to 1290 ppb of Hg upon flameless atomic absorption analysis. Compared with current U.S. rejection value of 5 ppb for potable waters, the above levels seem sufficiently high to be a matter of environmental concern.

  12. Influence of local environmental conditions and bleaching histories ...

    African Journals Online (AJOL)

    Here, 10 reef-building coral samples were collected from different reefs along the Tanzanian coast with different micro-environments and bleaching histories. The ITS-2 region of ribosomal DNA was employed in the characterisation of Symbiodinium harboured by reef-building corals. DGGE fingerprints and DNA sequences ...

  13. Value-added products from spent bleaching earth

    International Nuclear Information System (INIS)

    Loh Soh Kheang; Muzammil Ngatiman; James, Stephen

    2010-01-01

    Full text: Bleaching earth is used in the bleaching process of physical refining of palm oil to remove color, phospholipids, residue gums, oxidized products and any trace metals from the oil. These colored pigments are trapped and absorbed in the bleaching earth, thus transforming the originally whitish earth to dark grey and is, from then, named spent bleaching earth (SBE). SBE is considered as an industrial by-product as there is hardly any practical application for it. Large quantity of SBE is commonly disposed of in landfills, which poses potential hazards to environment. New economical ways in utilizing it is sought to eliminate the problem arises from its disposal. This paper presents a study on the possibility of developing a soil conditioner using enhanced SBE as the base material. The study found that there are certain attributes observed in the enhanced SBE that could be of advantages for SBE to become a good soil conditioner. The enhanced SBE contains organic matters and about 18-20 % of residue oil which exhibits good water holding capacity in slow release of water, and enriched nutrient content for plant nutrient uptake. (author)

  14. Project Overview: A Reef Manager's Guide to Coral Bleaching ...

    Science.gov (United States)

    The purpose of this report is to provide the latest scientific knowledge and discuss available management options to assist local and regional managers in responding effectively to mass coral bleaching events. Background A Reef Manager’s Guide to Coral Bleaching is the result of a collaborative effort by over 50 scientists and managers to: (1) share the best available scientific information on climate-related coral bleaching; and (2) compile a tool kit of currently available strategies for adaptive management of coral reefs in a changing climate. The result is a compendium of current information, tools, and practical suggestions to aid managers in their efforts to protect reefs in a way that maximizes reef resilience in the face of continuing climate change. The Guide is a joint publication of the National Oceanic and Atmospheric Administration, the Great Barrier Reef Marine Park Authority, and The World Conservation Union, with author contributions from a variety of international partners from government agencies, non-governmental organizations, and academic institutions. EPA’s Office of Research and Development was a major contributor to the Guide through authorship and participation in the final review and editing process for the entire report. A Reef Manager’s Guide to Coral Bleaching is the result of a collaborative effort by over 50 scientists and managers to: (1) share the best available scientific information on climate-related coral blea

  15. Guest–host interactions in the alkaline bleaching of ...

    Indian Academy of Sciences (India)

    Administrator

    534 ported that in fading of triphenylmethane dye addi- tion of alcohol retards the rate. There is similarity between CD catalysed and micellar catalysed reac- tion of bleaching of the triphenylmethane dyes for water reaction. For RA, CD decelerates the rate of both water and hydroxide ion reaction (table 4). This is contrary to.

  16. Bleached and unbleached MFC nanobarriers: properties and hydrophobisation with hexamethyldisilazane

    Energy Technology Data Exchange (ETDEWEB)

    Chinga-Carrasco, Gary, E-mail: gary.chinga.carrasco@pfi.no [Paper and Fibre Research Institute (PFI) (Norway); Kuznetsova, Nina; Garaeva, Milyausha [Kazan National Research Technological University (KNRTU) (Russian Federation); Leirset, Ingebjorg [Paper and Fibre Research Institute (PFI) (Norway); Galiullina, Guzaliya; Kostochko, Anatoly [Kazan National Research Technological University (KNRTU) (Russian Federation); Syverud, Kristin [Paper and Fibre Research Institute (PFI) (Norway)

    2012-12-15

    This study explores the production and surface modification of microfibrillated cellulose (MFC), based on unbleached and bleached Pinus radiata pulp fibres. Unbleached Pinus radiata pulp fibres tend to fibrillate easier by homogenisation without pre-treatment, compared to the corresponding bleached MFC. The resulting unbleached MFC films have higher barrier against oxygen, lower water wettability and higher tensile strength than the corresponding bleached MFC qualities. In addition, it is demonstrated that carboxymethylation can also be applied for production of highly fibrillated unbleached MFC. The nanofibril size distribution of the carboxymethylated MFC is narrow with diameters less than 20 nm, as quantified on high-resolution field-emission scanning electron microscopy images. The carboxymetylation had a larger fibrillation effect on the bleached pulp fibres than on the unbleached one. Importantly, the suitability of hexamethyldisilazane (HMDS) as a new alternative for rendering MFC films hydrophobic was demonstrated. The HMDS-modified films made of carboxymethylated MFC had oxygen permeability levels better than 0.06 mL mm m{sup -2} day{sup -1} atm{sup -1}, which is a good property for some packaging applications.

  17. Bleached and unbleached MFC nanobarriers: properties and hydrophobisation with hexamethyldisilazane

    Science.gov (United States)

    Chinga-Carrasco, Gary; Kuznetsova, Nina; Garaeva, Milyausha; Leirset, Ingebjørg; Galiullina, Guzaliya; Kostochko, Anatoly; Syverud, Kristin

    2012-12-01

    This study explores the production and surface modification of microfibrillated cellulose (MFC), based on unbleached and bleached Pinus radiata pulp fibres. Unbleached Pinus radiata pulp fibres tend to fibrillate easier by homogenisation without pre-treatment, compared to the corresponding bleached MFC. The resulting unbleached MFC films have higher barrier against oxygen, lower water wettability and higher tensile strength than the corresponding bleached MFC qualities. In addition, it is demonstrated that carboxymethylation can also be applied for production of highly fibrillated unbleached MFC. The nanofibril size distribution of the carboxymethylated MFC is narrow with diameters less than 20 nm, as quantified on high-resolution field-emission scanning electron microscopy images. The carboxymetylation had a larger fibrillation effect on the bleached pulp fibres than on the unbleached one. Importantly, the suitability of hexamethyldisilazane (HMDS) as a new alternative for rendering MFC films hydrophobic was demonstrated. The HMDS-modified films made of carboxymethylated MFC had oxygen permeability levels better than 0.06 mL mm m-2 day-1 atm-1, which is a good property for some packaging applications.

  18. Coral Bleaching and Associated Mortality at Mayotte, Western Indian ...

    African Journals Online (AJOL)

    the 1998 ENSO event. Acknowledgement–We thank Benjamin. Esperance, la Direction de l'Agriculture et de la Forêt (DAF), and Léonard Durasnel and Said Mohammed, Conseil General de. Mayotte, for supporting this study. Table 1. Genera commonly bleached at Mayotte in May 2010, listed in the order of the degree and.

  19. Bleach Solution Requirement for Hatching of Daphnia magna Resting Eggs

    Directory of Open Access Journals (Sweden)

    Catur Retnaningdyah

    2016-11-01

    Full Text Available Daphnia (water fleas belong to the zooplankton group called Cladocerans have sexual reproduction when conditions less favorable that produce diapausing eggs are enclosed in the ephippium. Hatching ephippial eggs in the laboratory is important in ecological, toxicology, genetical, and evolutionary studies. This study aims to improve the current methods of egg hatching from ephippium. Each of 50 ephippium were treated together by placing them in a glass jar and adding 50 mL bleach solution (sodium hypochlorite. Concentrations of sodium hypochlorite used in this experiment were 0%, 0.5%, 1%, 2%, 4% and 8%. These concentration treatments were crossed with the following exposure times (1, 2, 4, 8, 16, and 32 minutes. Culturing was done in 80 mL of artificial Daphnia medium, incubated in constant light and temperatures 20°C for 25 days. There were two repetitions in this experiment that were run at the same time. Result of this experiment showed that pretreatment with 0.5-8% bleach solution significantly increases the yield of total hatch rate of Daphnia magna resting eggs by about 21% over unbleached control. However, there was no significant difference among the bleach treatments. Concentration of bleach solution 0.5%, 1% and 4% significantly accelerated the time period until the first hatching (first day hatching. Difference of exposure time (1 - 32 minutes at each concentration treatments were not influence the yield of total hatch and the time period until first hatching.

  20. Natural and recombinant fungal laccases for paper pulp bleaching

    NARCIS (Netherlands)

    Sigoillot, C.; Record, E.; Belle, V.; Robert, J.L.; Levasseur, A.; Punt, P.J.; Hondel, C.A.M.J.J. van den; Fournel, A.; Sigoillot, J.C.; Asther, M.

    2004-01-01

    Three laccases, a natural form and two recombinant forms obtained from two different expression hosts, were characterized and compared for paper pulp bleaching. Laccase from Pycnoporus cinnabarinus, a well known lignolytic fungus, was selected as a reference for this study. The corresponding

  1. Spent Bleaching Earth as a Pozzolanic Material | Muthengia ...

    African Journals Online (AJOL)

    This paper proposes a cementing material from spent bleaching earth (SBE). SBE consists mainly of residual oil and ... The setting time of a workable paste of the ashed SBE-lime material was well within the Kenya standard 02 1263 requirements for Portland pozzolana cements. Key words: Cement, pozzolana, Spent ...

  2. Symbiont Dependent Thermal Bleaching Susceptiblity in Two Reef ...

    African Journals Online (AJOL)

    user1

    Differential bleaching susceptibility among scleractinian corals has been documented both in the field in Okinawa, Japan (Loya et al. 2001), on the Great Barrier Reef, Australia (Marshall &. Baird, 2000; Baird & Marshall, 2002), and in the Indian Ocean (Spencer et al. 2000) and under experimental trials (Fitt & Warner, 1995; ...

  3. Exploring Artificial Intelligence Utilizing BioArt

    OpenAIRE

    Simou , Panagiota; Tiligadis , Konstantinos; Alexiou , Athanasios

    2013-01-01

    Part 15: First Workshop on Ethics and Philosophy in Artificial Intelligence (EPAI 2013); International audience; While artificial intelligence combined with Bioinformatics and Nanotechnology offers a variety of improvements and a technological and healthcare revolution, Bioartists attempt to replace the traditional artistic medium with biological materials, bio-imaging techniques, bioreactors and several times to treat their own body as an alive canvas. BioArt seems to play the role of a new ...

  4. Assessing dentin color changes from nightguard vital bleaching.

    Science.gov (United States)

    McCaslin, A J; Haywood, V B; Potter, B J; Dickinson, G L; Russell, C M

    1999-10-01

    At-home bleaching with 10 percent carbamide peroxide in a custom-fitted tray has been reported to change the color of dentin. The purpose of this study was to validate the color change of dentin and to determine whether the color change was uniform or occurred from the outside (the dentinoenamel junction) to the inside (the pulpal wall). The authors sectioned 10 extracted human teeth incisogingivally through the midfacial long axis, and sealed their cut surface against glass microscope slides. Identifying marks were placed on the glass over the tooth sections to serve as a color control and in the dentinal areas closest to the dentinoenamel junction and the pulpal wall. Teeth were bleached for 10 days with 10 percent carbamide peroxide. Photographs were taken from the glass-covered side of the teeth, digitized and converted to gray-scale levels (consisting of 256 shades of gray ranging from black to white). Marked areas were measured with a National Institutes of Health Image software program and analyzed statistically for changes in lightness between the control marks and the inner and outer dentinal marks over time. Paired t-tests and analysis of variance indicated a significant increase in lightness (P = .01) for the inner and outer dentinal areas during bleaching compared with the control areas. No significant differences were found in the rate of change for the inner and outer dentinal areas (P = .89). The increase in lightness confirms that a significant color change occurred in the dentin during bleaching with 10 percent carbamide peroxide. This change occurred throughout the dentin at a uniform rate, rather than from the outside inward. The results of this study show that at-home bleaching with 10 percent carbamide peroxide can change the color of dentin, which is important to treat intrinsic stains from tetracycline treatment, trauma and aging or inherited discolorations. The bleaching material easily penetrates the tooth to change the dentin color at the

  5. Bahan pemutih gigi dengan sertifikat ADA/ISO (Tooth bleaching material with ADA/ISO certificate

    Directory of Open Access Journals (Sweden)

    Asti Meizarini

    2005-06-01

    Full Text Available Bleaching of teeth for cosmetic reasons is a popular aspect of cosmetic dentistry because patients realize the aesthetical benefits of these products. The dentist as a clinician's practitioner must be knowledgeable of the products and their application techniques. Bleaching materials which are safe and effective are the ADA accepted or manufactured by those which have already haved ISO certificate. Dentist must have enough knowledge about in-office bleaching prescribed for home-use bleaching including their contra indication and side effects, to advise the patients and provide effective bleaching services.

  6. Large-scale bleaching of corals on the Great Barrier Reef.

    Science.gov (United States)

    Hughes, T P; Kerry, J T; Simpson, T

    2018-02-01

    In 2015-2016, record temperatures triggered a pan-tropical episode of coral bleaching. In the southern hemisphere summer of March-April 2016, we used aerial surveys to measure the level of bleaching on 1,156 individual reefs throughout the 2,300 km length of the Great Barrier Reef, the world's largest coral reef system. The accuracy of the aerial scores was ground-truthed with detailed underwater surveys of bleaching at 260 sites (104 reefs), allowing us to compare aerial and underwater bleaching data with satellite-derived temperatures and with associated model predictions of bleaching. The severity of bleaching on individual reefs in 2016 was tightly correlated with the level of local heat exposure: the southernmost region of the Great Barrier Reef escaped with only minor bleaching because summer temperatures there were close to average. Gradients in nutrients and turbidity from inshore to offshore across the Great Barrier Reef had minimal effect on the severity of bleaching. Similarly, bleaching was equally severe on reefs that are open or closed to fishing, once the level of satellite-derived heat exposure was accounted for. The level of post-bleaching mortality, measured underwater after 7-8 months, was tightly correlated with the aerial scores measured at the peak of bleaching. Similarly, reefs with a high aerial bleaching score also experienced major shifts in species composition due to extensive mortality of heat-sensitive species. Reefs with low bleaching scores did not change in composition, and some showed minor increases in coral cover. Two earlier mass bleaching events occurred on the Great Barrier Reef in 1998 and 2002, that were less severe than 2016. In 2016, reefs had no bleaching, compared to 42% in 2002 and 44% in 1998. Conversely, the proportion of reefs that were severely bleached (>60% of corals affected) was four times higher in 2016. The geographic footprint of each of the three events is distinctive, and matches satellite-derived sea

  7. Effect of coffee and a cola-based soft drink on the color stability of bleached bovine incisors considering the time elapsed after bleaching.

    Science.gov (United States)

    Pirolo, Rodrigo; Mondelli, Rafael Francisco Lia; Correr, Gisele Maria; Gonzaga, Carla Castiglia; Furuse, Adilson Yoshio

    2014-01-01

    There is no consensus about the waiting time necessary for the patient to start consuming beverages containing colorants again after bleaching. To evaluate the influence of beverages with coloring agents on bleached bovine incisors considering the time elapsed after bleaching. Sixty bovine incisors were bleached with 35% hydrogen peroxide for in-office use (Whiteness HP Max) and divided into 10 groups. The color was evaluated with a spectrophotometer (Spectro Shade MICRO) before and after bleaching, employing the CIE-Lab system. After bleaching, the teeth were exposed for 5 min to coffee or cola-based soft drink (CBSD) at different periods after bleaching: 10 min, 1 h, 24 h, 48 h, and 72 h. Color (∆E) and lightness (∆L) variations were obtained from the CIE-Lab coordinates. Data were subjected to two-way ANOVA and Tukey HSD tests (ppigmented with coffee presented ∆E values below 3.3 units for all evaluation times. The exposure to coffee after bleaching causes less color changes than the exposure to a CBSD regardless of the time after bleaching.

  8. Effect of coffe and a cola-based soft drink on the color stability of bleached bovine incisors considering the time elapsed after bleaching

    Science.gov (United States)

    PIROLO, Rodrigo; MONDELLI, Rafael Francisco Lia; CORRER, Gisele Maria; GONZAGA, Carla Castiglia; FURUSE, Adilson Yoshio

    2014-01-01

    There is no consensus about the waiting time necessary for the patient to start consuming beverages containing colorants again after bleaching. Objective: To evaluate the influence of beverages with coloring agents on bleached bovine incisors considering the time elapsed after bleaching. Materials and methods: Sixty bovine incisors were bleached with 35% hydrogen peroxide for in-office use (Whiteness HP Max) and divided into 10 groups. The color was evaluated with a spectrophotometer (Spectro Shade MICRO) before and after bleaching, employing the CIE-Lab system. After bleaching, the teeth were exposed for 5 min to coffee or cola-based soft drink (CBSD) at different periods after bleaching: 10 min, 1 h, 24 h, 48 h, and 72 h. Color (∆E) and lightness (∆L) variations were obtained from the CIE-Lab coordinates. Data were subjected to two-way ANOVA and Tukey HSD tests (pteeth stained with a CBSD at 10 min and 1 h (4.12 and 4.16, respectively). Teeth pigmented with coffee presented ∆E values below 3.3 units for all evaluation times. Conclusion: The exposure to coffee after bleaching causes less color changes than the exposure to a CBSD regardless of the time after bleaching. PMID:25075672

  9. Tropical cyclone cooling combats region-wide coral bleaching.

    Science.gov (United States)

    Carrigan, Adam D; Puotinen, Marji

    2014-05-01

    Coral bleaching has become more frequent and widespread as a result of rising sea surface temperature (SST). During a regional scale SST anomaly, reef exposure to thermal stress is patchy in part due to physical factors that reduce SST to provide thermal refuge. Tropical cyclones (TCs - hurricanes, typhoons) can induce temperature drops at spatial scales comparable to that of the SST anomaly itself. Such cyclone cooling can mitigate bleaching across broad areas when well-timed and appropriately located, yet the spatial and temporal prevalence of this phenomenon has not been quantified. Here, satellite SST and historical TC data are used to reconstruct cool wakes (n=46) across the Caribbean during two active TC seasons (2005 and 2010) where high thermal stress was widespread. Upon comparison of these datasets with thermal stress data from Coral Reef Watch and published accounts of bleaching, it is evident that TC cooling reduced thermal stress at a region-wide scale. The results show that during a mass bleaching event, TC cooling reduced thermal stress below critical levels to potentially mitigate bleaching at some reefs, and interrupted natural warming cycles to slow the build-up of thermal stress at others. Furthermore, reconstructed TC wave damage zones suggest that it was rare for more reef area to be damaged by waves than was cooled (only 12% of TCs). Extending the time series back to 1985 (n = 314), we estimate that for the recent period of enhanced TC activity (1995-2010), the annual probability that cooling and thermal stress co-occur is as high as 31% at some reefs. Quantifying such probabilities across the other tropical regions where both coral reefs and TCs exist is vital for improving our understanding of how reef exposure to rising SSTs may vary, and contributes to a basis for targeting reef conservation. © 2014 John Wiley & Sons Ltd.

  10. Surface discoloration of composite resins: Effects of staining and bleaching

    Science.gov (United States)

    Poggio, Claudio; Beltrami, Riccardo; Scribante, Andrea; Colombo, Marco; Chiesa, Marco

    2012-01-01

    Background: The purpose of this in vitro study was to evaluate surface discoloration of three microhybrid composite resins (Esthet•X HD, Clearfil AP-X, Gradia Direct) and five nanohybrid composite resins (Ceram•X, GC Kalore, G-aenial, Grandio, GrandioSO), after staining and bleaching procedures. Materials and Methods: The composite resins were polymerized with a curing light (Celalux II, Voco, Cuxhaven, Germany) into 160 silicon molds (6,4 mm in diameter and 2 mm in thickness) to obtain identical specimens. Twenty samples for each composite resin were prepared. The specimens were polished using an automated polishing machine with the sequence of 600-, 800-, 1000-grit abrasive paper under water irrigation. The specimens were immersed in tea and distilled water: the specimens were dipped for 20 min, once a day (every 24 h), for 14 days into the drinks. The specimens were then bleached with carbamide peroxide at 17% (Perfect Bleach-Voco). The color of specimens was measured with a spectrophotometer according to the CIE L*a*b* system after light-polymerization of composite resin specimens, after 7 days, after 14 days, and after bleaching. The color difference h index (DEab*) between each measurement was calculated. Statistical analysis was made using analysis of variance (ANOVA). Results: All specimens showed a significant increase in staining with a similar trend and no significant differences between microhybrid and nanohybrid composite resins. After whitening procedures, materials tested showed both significant and unsignificant differences of the h index. Conclusions: Microhybrid and nanohybrid composite resins had similar in vitro surface discoloration in tea. After bleaching, discoloration was removed from some composite resins tested. PMID:23559921

  11. Surface discoloration of composite resins: Effects of staining and bleaching

    Directory of Open Access Journals (Sweden)

    Claudio Poggio

    2012-01-01

    Full Text Available Background: The purpose of this in vitro study was to evaluate surface discoloration of three microhybrid composite resins (Esthet·X HD, Clearfil AP-X, Gradia Direct and five nanohybrid composite resins (Ceram·X, GC Kalore, G-aenial, Grandio, GrandioSO, after staining and bleaching procedures. Materials and Methods: The composite resins were polymerized with a curing light (Celalux II, Voco, Cuxhaven, Germany into 160 silicon molds (6,4 mm in diameter and 2 mm in thickness to obtain identical specimens. Twenty samples for each composite resin were prepared. The specimens were polished using an automated polishing machine with the sequence of 600-, 800-, 1000-grit abrasive paper under water irrigation. The specimens were immersed in tea and distilled water: the specimens were dipped for 20 min, once a day (every 24 h, for 14 days into the drinks. The specimens were then bleached with carbamide peroxide at 17% (Perfect Bleach-Voco. The color of specimens was measured with a spectrophotometer according to the CIE LFNx01aFNx01bFNx01 system after light-polymerization of composite resin specimens, after 7 days, after 14 days, and after bleaching. The color difference h index (DE abFNx01 between each measurement was calculated. Statistical analysis was made using analysis of variance (ANOVA. Results: All specimens showed a significant increase in staining with a similar trend and no significant differences between microhybrid and nanohybrid composite resins. After whitening procedures, materials tested showed both significant and unsignificant differences of the h index. Conclusions: Microhybrid and nanohybrid composite resins had similar in vitro surface discoloration in tea. After bleaching, discoloration was removed from some composite resins tested.

  12. Surface discoloration of composite resins: Effects of staining and bleaching.

    Science.gov (United States)

    Poggio, Claudio; Beltrami, Riccardo; Scribante, Andrea; Colombo, Marco; Chiesa, Marco

    2012-09-01

    The purpose of this in vitro study was to evaluate surface discoloration of three microhybrid composite resins (Esthet•X HD, Clearfil AP-X, Gradia Direct) and five nanohybrid composite resins (Ceram•X, GC Kalore, G-aenial, Grandio, GrandioSO), after staining and bleaching procedures. The composite resins were polymerized with a curing light (Celalux II, Voco, Cuxhaven, Germany) into 160 silicon molds (6,4 mm in diameter and 2 mm in thickness) to obtain identical specimens. Twenty samples for each composite resin were prepared. The specimens were polished using an automated polishing machine with the sequence of 600-, 800-, 1000-grit abrasive paper under water irrigation. The specimens were immersed in tea and distilled water: the specimens were dipped for 20 min, once a day (every 24 h), for 14 days into the drinks. The specimens were then bleached with carbamide peroxide at 17% (Perfect Bleach-Voco). The color of specimens was measured with a spectrophotometer according to the CIE L(*)a(*)b(*) system after light-polymerization of composite resin specimens, after 7 days, after 14 days, and after bleaching. The color difference h index (DEab(*)) between each measurement was calculated. Statistical analysis was made using analysis of variance (ANOVA). All specimens showed a significant increase in staining with a similar trend and no significant differences between microhybrid and nanohybrid composite resins. After whitening procedures, materials tested showed both significant and unsignificant differences of the h index. Microhybrid and nanohybrid composite resins had similar in vitro surface discoloration in tea. After bleaching, discoloration was removed from some composite resins tested.

  13. Depletion Rate of Hydrogen Peroxide from Sodium Perborate Bleaching Agent.

    Science.gov (United States)

    Tran, Liliann; Orth, Rebecca; Parashos, Peter; Tao, Ying; Tee, Calvin W J; Thomas, Vineet Thenalil; Towers, Georgina; Truong, Diem Thuy; Vinen, Cynthia; Reynolds, Eric C

    2017-03-01

    Internal bleaching of discolored teeth uses sodium perborate reacting with water to form the active agent, hydrogen peroxide (H 2 O 2 ). Sodium perborate is replaced at varying time intervals depending on clinician preference and until esthetically acceptable results are achieved, but this is done without scientific basis. This study measured the depletion rate of hydrogen peroxide from sodium perborate as a bleaching agent. Two sodium perborate bleaching products (Odontobleach [Australian Dental Manufacturing, Kenmore Hills, Queensland, Australia] and Endosure Perborate Micro [Dentalife, Ringwood, Victoria, Australia]) and distilled deionized water mixtures at ratios of 25 μg/mL, 50 μg/mL, and 100 μg/mL were placed into sealed microtubes and incubated at 37°C. H 2 O 2 concentrations were measured at 23 time points over 4 weeks. Quantification of H 2 O 2 concentrations was obtained using a ferrothiocyanate oxidation reduction reaction followed by spectrophotometry readings. The H 2 O 2 concentration rapidly peaked within 27 hours and reached a plateau by about 3 days (75 hours). Low levels of H 2 O 2 were evident beyond 3 days and for at least 28 days. No significant differences were found between the 2 sodium perborate products. There was also no significant difference in the depletion rate between the different ratios. Based on the chemistry of H 2 O 2 depletion, the minimum replacement interval for the bleaching agent is 3 days. Frequent replacements of the perborate clinically may be unnecessary because of the continued presence of low H 2 O 2 levels for at least 28 days. Although these data cannot be extrapolated to the clinical situation, they set a baseline for further studies to address the many clinical variables influencing internal bleaching. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  14. Tooth bleaching induces changes in the vascular permeability of rat incisor pulps.

    Science.gov (United States)

    Ferreira, Vanessa Guarino; Nabeshima, Cleber Keiti; Marques, Márcia Martins; Paris, Adriana Fraga Costa Samos; Gioso, Marco Antônio; dos Reis, Rodrigo Sant'anna Aguiar; Machado, Manoel Eduardo de Lima

    2013-10-01

    To evaluate the inflammatory response in dental pulps of rat incisors subjected to tooth bleaching protocols with different HP concentrations and application times. 42 incisors from Wistar rats were submitted to tooth bleaching using concentrations of 25% or 35% HP for treatment times of 15, 30 or 45 minutes. Four non-bleached teeth were used as controls. The animals received an intravenous injection of India ink immediately after the bleaching procedure and were sacrificed 1 hour later. Six bleached teeth from each group and three controls were made transparent, and one sample from each group was processed for histological analysis. The data were statistically analyzed using Kruskal Wallis and Dunn's tests (P ink content was significantly higher in the samples that were bleached with 35% HP for 30 minutes and with both HP concentrations (25 and 35%) for 45 minutes than in the controls. For the samples bleached with the same HP concentration, the ink content was higher in samples that were bleached for 45 minutes. These results indicate that HP tooth bleaching can induce an increase in vascular permeability in rat incisors. Importantly, this increase is more dependent on the length of the bleaching procedure than on the concentration of the bleaching agent.

  15. In-office bleaching effects on the pulp flow and tooth sensitivity – case series

    Directory of Open Access Journals (Sweden)

    Andrés Felipe CARTAGENA

    2015-01-01

    Full Text Available Laser Doppler flowmetry (LDF is a noninvasive method capable of evaluating variations in pulp blood flow (PBF and pulp vitality. This method has thus far not been used to assess changes in blood flow after in-office bleaching. The aim of this case series report was to measure changes in PBF by LDF in the upper central incisor of three patients submitted to in-office bleaching. The buccal surfaces of the upper arch were bleached with a single session of 35% hydrogen peroxide gel with three 15-min applications. The color was recorded using a value-oriented Vita shade guide before in-office bleaching and one week after the procedure. The tooth sensitivity (TS in a verbal scale was reported, and PBF was assessed by LDF before, immediately, and one week after the bleaching session. The lower arch was submitted to dental bleaching but not used for data assessment. A whitening degree of 3 to 4 shade guide units was detected. All participants experienced moderate to considerable TS after the procedure. The PBF readings reduced 20% to 40% immediately after bleaching. One week post-bleaching, TS and PBF were shown to be equal to baseline values. A reversible decrease of PBF was detected immediately after bleaching, which recovered to the baseline values or showed a slight increase sooner than one week post-bleaching. The LDF method allows detection of pulp blood changes in teeth submitted to in-office bleaching, but further studies are still required.

  16. Effect of the Purple Corn Beverage “Chicha Morada” in Composite Resin during Dental Bleaching

    Directory of Open Access Journals (Sweden)

    Eric Dario Acuña

    2016-01-01

    Full Text Available During dental bleaching the staining potential of the surface would increase. This study aims to evaluate the staining susceptibility of one bleached composite resin after the exposure to three different beverages: Peruvian purple corn based beverage (chicha morada, green tea, and distilled water. Thirty disk-shaped specimens of one nanofill composite resin were prepared. The specimens were then divided into six groups (n=5: purple corn (P, purple corn + bleaching (PB, green tea (T, green tea + bleaching (TB, distilled water (W, and distilled water + bleaching (WB. In groups that received bleaching, two sessions of bleaching with 35% hydrogen peroxide were done. Following bleaching, specimens were exposed to each liquid thirty minutes daily. Color was measured with a digital spectrophotometer. For statistical analysis, color measurement differences between the obtained results were used: during bleaching, after bleaching, and during + after bleaching. Two-way ANOVA was used to compare the color changes in the resins of all groups (p3.3.

  17. Effect of in-office bleaching agents on physical properties of dental composite resins.

    Science.gov (United States)

    Mourouzis, Petros; Koulaouzidou, Elisabeth A; Helvatjoglu-Antoniades, Maria

    2013-04-01

    The physical properties of dental restorative materials have a crucial effect on the longevity of restorations and moreover on the esthetic demands of patients, but they may be compromised by bleaching treatments. The purpose of this study was to evaluate the effects of in-office bleaching agents on the physical properties of three composite resin restorative materials. The bleaching agents used were hydrogen peroxide and carbamide peroxide at high concentrations. Specimens of each material were prepared, cured, and polished. Measurements of color difference, microhardness, and surface roughness were recorded before and after bleaching and data were examined statistically by analysis of variance (ANOVA) and Tukey HSD post-hoc test at P composite resin altered after the bleaching procedure (P composite resins tested (P > .05). The silorane-based composite resin tested showed some color alteration after bleaching procedures. The bleaching procedure did not alter the microhardness and the surface roughness of all composite resins tested.

  18. Response of sponges with autotrophic endosymbionts during the coral-bleaching episode in Puerto Rico

    Science.gov (United States)

    Vicente, V. P.

    1990-04-01

    An updated list of sponges with algal endosymbionts including new records for Puerto Rico and the Caribbean, indicates that thirty-five species of common Caribbean sponges possess photosynthetic endosymbionts. Of these, 23 (67.6%) species in seven orders, were found with unicellular chroococcoid cyanobacteria ( Aphanocapsa-like) and 5 (14.7%) hadromerid species were found with zooxanthellae. Sponges with other algae as symbionts occur less frequently (≦6%). Thirty-one common sponge species were inspected for bleaching during coral-bleaching months (July-September 1987; January 1988) in Puerto Rico. Anthosigmella varians, Xestospongia muta and Petrosia pellasarca bleached partially, but only few individuals within any given population became bleached and the bleaching of sponges was very localized. Adaptations between cyanobacterial symbionts and sponges, acquired during the long evolutionary history of these two taxa may explain the paucity of bleached sponges when compared to the high incidence of bleached corals reported.

  19. Bio-leaching and bio-remediation; Biolixiviation et bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Morin, D. [BRGM, 75 - Paris (France)

    2003-09-01

    There are only a few bio-technological applications in ore beneficiation, but many in the environmental domain. Economical, technical and technological factors as well as respective contexts in project development explain this difference. In both cases however, the problem is to utilize processes coming from the observation of natural phenomena and to stimulate a beneficial biological activity in a mineral context; it results similar applications with similar limitations. In this paper, the characteristics of both domains are outlined, on the basis of present practices in extractive metallurgy and degradation of organic pollutants respectively, pointing out their similarities and their differences. (author)

  20. From marine bio-corrosion to new bio-processes

    Energy Technology Data Exchange (ETDEWEB)

    Bergel, A.; Dasilva, S.; Basseguy, R. [Laboratoire de Genie Chimique (CNRS), 31 - Toulouse (France); Feron, D. [CEA Saclay (SCCME), 91 - Gif-sur-Yvette (France); Mollica, A. [CNR-ISMAR, Genova (Italy)

    2004-07-01

    Full text of publication follows: From the middle of the last century it has been observed that the development of marine bio-films on the surface of stainless steels and different metallic materials induces the ennoblement of their free corrosion potential. A main step in deciphering the mechanisms of aerobic marine bio-corrosion has been achieved around 1976 with the demonstration that the potential ennoblement was due to the modification of the cathodic process. Since this date, the catalysis of oxygen reduction by marine bio-films has been the topic of numerous controversies, but it is now commonly agreed as a basic phenomena in aerobic corrosion. Several hypotheses have been proposed to explain the fine mechanisms of the bio-film-catalysed reduction of oxygen: intermediate formation of hydrogen peroxide, modification of the oxide layer on the stainless steel surface, involvement of manganese species and manganese oxidising bacteria, catalysis by proteins produced by the micro-organisms... Recent results may confirm the possible involvement of hemic enzymes or proteins. Whatever the mechanisms, very promising results have been obtained with the possible application of bio-film-catalysed oxygen reduction to conceive innovative biofuel cells with stainless steel electrodes. Actually, the catalysis of oxygen reduction is a key step that still drastically hinders the development of economically efficient hydrogen/oxygen fuel cells. The current technology requires high amounts of platinum or platinum-based materials to catalyze oxygen reduction on the cathode of these cells. The prohibitive cost of platinum is a main obstacle to the commercialization of low-cost fuel cells. Unpublished results recently showed that adapting the enzyme-catalysed reaction that was assumed for bio-corrosion on the cathode of hydrogen/oxygen fuel cells may lead to a significant decrease in the charge of platinum. Moreover, it was demonstrated on a laboratory-scale fuel cell pilot that

  1. From marine bio-corrosion to new bio-processes

    International Nuclear Information System (INIS)

    Bergel, A.; Dasilva, S.; Basseguy, R.; Feron, D.; Mollica, A.

    2004-01-01

    Full text of publication follows: From the middle of the last century it has been observed that the development of marine bio-films on the surface of stainless steels and different metallic materials induces the ennoblement of their free corrosion potential. A main step in deciphering the mechanisms of aerobic marine bio-corrosion has been achieved around 1976 with the demonstration that the potential ennoblement was due to the modification of the cathodic process. Since this date, the catalysis of oxygen reduction by marine bio-films has been the topic of numerous controversies, but it is now commonly agreed as a basic phenomena in aerobic corrosion. Several hypotheses have been proposed to explain the fine mechanisms of the bio-film-catalysed reduction of oxygen: intermediate formation of hydrogen peroxide, modification of the oxide layer on the stainless steel surface, involvement of manganese species and manganese oxidising bacteria, catalysis by proteins produced by the micro-organisms... Recent results may confirm the possible involvement of hemic enzymes or proteins. Whatever the mechanisms, very promising results have been obtained with the possible application of bio-film-catalysed oxygen reduction to conceive innovative biofuel cells with stainless steel electrodes. Actually, the catalysis of oxygen reduction is a key step that still drastically hinders the development of economically efficient hydrogen/oxygen fuel cells. The current technology requires high amounts of platinum or platinum-based materials to catalyze oxygen reduction on the cathode of these cells. The prohibitive cost of platinum is a main obstacle to the commercialization of low-cost fuel cells. Unpublished results recently showed that adapting the enzyme-catalysed reaction that was assumed for bio-corrosion on the cathode of hydrogen/oxygen fuel cells may lead to a significant decrease in the charge of platinum. Moreover, it was demonstrated on a laboratory-scale fuel cell pilot that

  2. Reduced bleaching in organic nanofibers by bilayer polymer/oxide coating

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter

    2010-01-01

    Organic semiconductors based on small molecules are receiving increased attention due in part to their application potential within various opto-electronic devices such as transistors, light-emitting diodes, and solar cells, but also due to their relative ease of processing, low price, and tunabi......Organic semiconductors based on small molecules are receiving increased attention due in part to their application potential within various opto-electronic devices such as transistors, light-emitting diodes, and solar cells, but also due to their relative ease of processing, low price...... the technological use of the nanofibers problematic. In order to investigate the photoinduced reaction in nanofibers, optical bleaching experiments have been performed by irradiating both pristine and coated nanofibers with UV light. Oxide coating materials (SiOx [2] and Al2O3) were applied onto p6P nanofibers....... These treatments caused a reduction of the bleaching reaction but in addition, the nanofiber luminescence spectrum was significantly altered. It was observed that some polymer coatings (P(TFE-PDD), and PMMA) do not interfere with the luminescence spectrum from the p6P but are not effective in stopping...

  3. Environmental Drivers of Variation in Bleaching Severity of Acropora Species during an Extreme Thermal Anomaly

    Directory of Open Access Journals (Sweden)

    Mia O. Hoogenboom

    2017-11-01

    Full Text Available High sea surface temperatures caused global coral bleaching during 2015–2016. During this thermal stress event, we quantified within- and among-species variability in bleaching severity for critical habitat-forming Acropora corals. The objective of this study was to understand the drivers of spatial and species-specific variation in the bleaching susceptibility of these corals, and to evaluate whether bleaching susceptibility under extreme thermal stress was consistent with that observed during less severe bleaching events. We surveyed and mapped Acropora corals at 10 sites (N = 596 around the Lizard Island group on the northern Great Barrier Reef. For each colony, bleaching severity was quantified using a new image analysis technique, and we assessed whether small-scale environmental variables (depth, microhabitat, competition intensity and species traits (colony morphology, colony size, known symbiont clade association explained variation in bleaching. Results showed that during severe thermal stress, bleaching of branching corals was linked to microhabitat features, and was more severe at reef edge compared with lagoonal sites. Bleaching severity worsened over a very short time-frame (~1 week, but did not differ systematically with water depth, competition intensity, or colony size. At our study location, within- and among-species variation in bleaching severity was relatively low compared to the level of variation reported in the literature. More broadly, our results indicate that variability in bleaching susceptibility during extreme thermal stress is not consistent with that observed during previous bleaching events that have ranged in severity among globally dispersed sites, with fewer species escaping bleaching during severe thermal stress. In addition, shaded microhabitats can provide a refuge from bleaching which provides further evidence of the importance of topographic complexity for maintaining the biodiversity and ecosystem

  4. Survival and growth of Alfalfa (Medicago sativa l.) inoculated with an am fungus (Glomus intraradices) in contaminated soils treated with two different remediation technologies (bio-pile and thermal desorption)

    International Nuclear Information System (INIS)

    Norini, M.P.; Beguiristain, Th.; Leyval, C.

    2005-01-01

    Polycyclic aromatic hydrocarbons (PAHs) represent a group of persistent and toxic soil pollutants that are of major public concern due to their mutagenic and carcinogenic property. Phyto-remediation is the use of plants and their associated microorganisms for remediation of polluted soils. Phyto-remediation could be used in conjunction with other remediation technologies to reduce the contamination to safe levels and maintain or restore soil physico-chemical and biological properties. Most plant species form mycorrhizas with symbiotic fungi. It was shown that AM fungi enhance survival and plant growth in PAH contaminated soils. Mycorrhizal fungi also enhance the biotransformation or biodegradation of PAH, although the effect differed between soils. A rhizosphere and myco-rhizosphere gradient of PAH concentrations was observed, with decreased PAH concentration with decreased distance to roots. Different microbial communities were found in the rhizosphere of AM and non-mycorrhizal plants in comparison to bulk soil, suggesting that AM could affect PAH degradation by changing microbial communities. We investigated the effect of mycorrhizal fungi and nutrients on the ability of alfalfa to grow on soil contaminated with PAHs before and after two remediation treatments. We used soil from an industrial site (Homecourt, North East part of France) highly contaminated with PAH (2000 mg kg -1 ), which has been partially treated by two different remediation technologies (bio-pile and thermal desorption). The bio-pile treatment consisted of piling the contaminated soil with stimulation of aerobic microbial activity by aeration and addition of nutrient solution, and reduced PAH concentration to around 300 mg kg-1. With the thermal desorption treatment the soil was heated to around 500 deg. C so that PAH vaporized and were separated from the soil. The residual PAH concentration in soil was 40 mg kg -1 . Treated and non-treated contaminated soil was planted with alfalfa (Medicago

  5. The problem of bio-concepts: biopolitics, bio-economy and the political economy of nothing

    Science.gov (United States)

    Birch, Kean

    2017-12-01

    Scholars in science and technology studies—and no doubt other fields—have increasingly drawn on Michel Foucault's concept of biopolitics to theorize a variety of new `bio-concepts'. While there might be some theoretical value in such exercises, many of these bio-concepts have simply replaced more rigorous—and therefore time-consuming—analytical work. This article provides a (sympathetic) critique of these various bio-concepts, especially as they are applied to the emerging `bio-economy'. In so doing, the article seeks to show that the analysis of the bio-economy could be better framed as a political economy of nothing. This has several implications for science education, which are raised in the article.

  6. Coral diseases and bleaching on Colombian Caribbean coral reefs

    Directory of Open Access Journals (Sweden)

    Raúl Navas-Camacho

    2010-05-01

    Full Text Available Since 1998 the National Monitoring System for the Coral Reefs of Colombia (SIMAC has monitored the occurrence of coral bleaching and diseases in some Colombian coral reefs (permanent stations at San Andres Island, Rosario Islands, Tayrona, San Bernardo Islands and Urabá. The main purpose is to evaluate their health status and to understand the factors that have been contributing to their decline. To estimate these occurrences, annual surveys in 126 permanent belt transects (10x2m with different depth intervals (3-6 meters, 9-12 meters and 15-18 meters are performed at all reef sites. Data from the 1998-2004 period, revealed that San Andrés Island had many colonies with diseases (38.9 colonies/m2, and Urabá had high numbers with bleaching (54.4 colonies/m2. Of the seven reported coral diseases studied, Dark Spots Disease (DSD, and White Plague Disease (WPD were noteworthy because they occurred in all Caribbean monitored sites, and because of their high interannual infection incidence. Thirty five species of scleractinian corals were affected by at least one disease and a high incidence of coral diseases on the main reef builders is documented. Bleaching was present in 34 species. During the whole monitoring period, Agaricia agaricites and Siderastrea siderea were the species most severely affected by DSD and bleaching, respectively. Diseases on species such as Agaricia fragilis, A.grahamae, A. humilis, Diploria clivosa, Eusmilia fastigiata, Millepora complanata, and Mycetophyllia aliciae are recorded for first time in Colombia. We present bleaching and disease incidences, kinds of diseases, coral species affected, reef localities studied, depth intervals of surveys, and temporal (years variation for each geographic area. This variation makes difficult to clearly determine defined patterns or general trends for monitored reefs. This is the first long-term study of coral diseases and bleaching in the Southwestern Caribbean, and one of the few

  7. Bio-fuel barometer

    International Nuclear Information System (INIS)

    2015-01-01

    After a year of doubt and decline the consumption of bio-fuel resumed a growth in 2014 in Europe: +6.1% compared to 2013, to reach 14 millions tep (Mtep) that is just below the 2012 peak. This increase was mainly due to bio-diesel. By taking into account the energy content and not the volume, the consumption of bio-diesel represented 79.7% of bio-fuel consumption in 2014, that of bio-ethanol only 19.1% and that of biogas 1%. The incorporating rate of bio-fuels in fuels used for transport were 4.6% in 2013 and 4.9% in 2014. The trend is good and the future of bio-fuel seems clearer as the European Union has set a not-so-bad limit of 7% for first generation bio-fuels in order to take into account the CASI effect. The CASI effect shows that an increase of the consumption of first generation bio-fuels (it means bio-fuels produced from food crops like rape, soy, cereals, sugar beet,...) implies in fact a global increase in greenhouse gas release that is due to a compensation phenomenon. More uncultivated lands (like forests, grasslands, bogs are turned into cultivated lands in order to compensate lands used for bio-fuel production. In most European countries the consumption of bio-diesel increased in 2014 while it was a bad year for the European industry of ethanol because ethanol prices dropped by 16 %. Oil companies are now among the most important producers of bio-diesel in Europe.

  8. In-Vitro Comparative Study of In-office and Home Bleaching Agents on Surface Micro-morphology of Enamel.

    Science.gov (United States)

    Fatima, Nazish

    2016-01-01

    To evaluate the effect of home-use bleaching agent containing 16% Carbamide Peroxide (CP) and in-office bleaching agent with 38% Hydrogen Peroxide (HP) on surface micro-morphology of enamel. An experimental study. The discs were prepared at Material Engineering Department of NED University of Engineering and Technology, Karachi, and surface morphology was analyzed at Centralized Science Laboratory of Karachi University, Pakistan. Duration of study was one year from January to December 2012. Forty five sound human third molar crowns, extracted for periodontal reason, were included in the study. Longitudinal sections were made using diamond disks (0.2 mm) under water lubrication to obtain enamel slabs measuring (3 mm x 3 mm). The slabs were embedded in polystyrene resin by using 2.0 cm diameter PVC molds, leaving the outer enamel surface uncovered by the resin. Ninety dental enamel slabs were prepared. The slabs were then randomly divided into 3 groups. Each group contained thirty specimens (n=30). Group 1 was kept in artificial saliva at 37°C in incubator (Memart, Germany) during whole experiment. Group 2 was treated with power whitening gel (White Smile 2011, Germany). Group 3 was treated with tooth whitening pen (White Smile 2011, Germany). The most central region or the region that was most representative of the entire surface area was used. The SEM (Jeol-Japan-JSM6380A, JAPAN) micrographs were examined to determine the type of surface presented. The enamel changes were classified as no or mild alteration, moderate alteration and severe altered surface. Regarding micro-morphology, the enamel surface of control groups showed smooth surface in general with some scattered clear scratches due to the polishing procedure. The specimens bleached in group 2 and group 3, represented areas of mild erosion. Bleaching with 38% Hydrogen Peroxide (HP) and 16% Carbamide Peroxide (CP) resulted in mild changes in surface micro-morphology of enamel.

  9. Bio-mimetic Flow Control

    Science.gov (United States)

    Choi, Haecheon

    2009-11-01

    Bio-mimetic engineering or bio-mimetics is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology (from Wikipedia). The concept itself is old, but successful developments have been made recently, especially in the research field of flow control. The objective of flow control based on the bio-mimetic approach is to develop novel concepts for reducing drag, increasing lift and enhancing aerodynamic performance. For skin friction reduction, a few ideas have been suggested such as the riblet from shark, compliant surface from dolphin, microbubble injection and multiple front-body curvature from penguin, and V-shaped protrusion from sailfish. For form drag reduction, several new attempts have been also made recently. Examples include the V-shaped spanwise grooves from saguaro cactus, overall shape of box fish, longitudinal grooves on scallop shell, bill of swordfish, hooked comb on owl wing, trailing-edge protrusion on dragonfly wing, and fillet. For the enhancement of aerodynamic performance, focuses have been made on the birds, fish and insects: e.g., double layered feather of landing bird, leading-edge serration of humpback-whale flipper, pectoral fin of flying fish, long tail on swallowtail-butterfly wing, wing flapping motion of dragonfly, and alula in birds. Living animals adapt their bodies to better performance in multi purposes, but engineering requires single purpose in most cases. Therefore, bio-mimetic approaches often produce excellent results more than expected. However, they are sometimes based on people's wrong understanding of nature and produce unwanted results. Successes and failures from bio-mimetic approaches in flow control will be discussed in the presentation.

  10. Bio diesel, v. 15(59)

    International Nuclear Information System (INIS)

    Gicheva, Ljubitsa

    2007-01-01

    The history of bio-fuels/bio-diesel is more political and economical than it is technological. The technology of the production is the same as it was 200 years ago. The economy closed the usage of bio-fuels in the middies of the 20 Th century and put it back on the agenda of the world economy at the beginning of the 21 st century. With price of more then 70 US$ per barrel of grudge oil, production and usage of bio-fuels becomes more economical category rather than political and ecological. If we, additionally, add secondary, yet nowadays very important factors, as ecological protection, recycling the emission of poisonous gasses, exploitation of agro sector, then the reincarnation of bio-fuels is very interesting, and for Macedonia a potentially strategic category. The basics of the biography is to follow in the article paying special attention on the characteristics, standards, production, processing and usage of the bio-diesel fuel as well as the blended B20 and B5. (Author)

  11. Bio diesel, v. 15(58)

    International Nuclear Information System (INIS)

    Gicheva, Ljubitsa

    2007-01-01

    The history of bio-fuels/bio-diesel is more political and economical than it is technological. The technology of the production is the same as it was 200 years ago. The economy closed the usage of bio-fuels in the middies of the 20 Th century and put it back on the agenda of the world economy at the beginning of the 21 st century. With price of more then 70 US$ per barrel of grudge oil, production and usage of bio-fuels becomes more economical category rather than political and ecological. If we, additionally, add secondary, yet nowadays very important factors, as ecological protection, recycling the emission of poisonous gasses, exploitation of agro sector, then the reincarnation of bio-fuels is very interesting, and for Macedonia a potentially strategic category. The basics of the biography is to follow in the article paying special attention on the characteristics, standards, production, processing and usage of the bio-diesel fuel as well as the blended B20 and B5. (Author)

  12. Susceptibility of central Red Sea corals during a major bleaching event

    KAUST Repository

    Furby, Kathryn A.

    2013-01-04

    A major coral bleaching event occurred in the central Red Sea near Thuwal, Saudi Arabia, in the summer of 2010, when the region experienced up to 10-11 degree heating weeks. We documented the susceptibility of various coral taxa to bleaching at eight reefs during the peak of this thermal stress. Oculinids and agaricids were most susceptible to bleaching, with up to 100 and 80 % of colonies of these families, respectively, bleaching at some reefs. In contrast, some families, such as mussids, pocilloporids, and pectinids showed low levels of bleaching (<20 % on average). We resurveyed the reefs 7 months later to estimate subsequent mortality. Mortality was highly variable among taxa, with some taxa showing evidence of full recovery and some (e. g., acroporids) apparently suffering nearly complete mortality. The unequal mortality among families resulted in significant change in community composition following the bleaching. Significant factors in the likelihood of coral bleaching during this event were depth of the reef and distance of the reef from shore. Shallow reefs and inshore reefs had a higher prevalence of bleaching. This bleaching event shows that Red Sea reefs are subject to the same increasing pressures that reefs face worldwide. This study provides a quantitative, genus-level assessment of the vulnerability of various coral groups from within the Red Sea to bleaching and estimates subsequent mortality. As such, it can provide valuable insights into the future for reef communities in the Red Sea. © 2013 Springer-Verlag Berlin Heidelberg.

  13. Nonvital tooth bleaching: a review of the literature and clinical procedures.

    Science.gov (United States)

    Plotino, Gianluca; Buono, Laura; Grande, Nicola M; Pameijer, Cornelis H; Somma, Francesco

    2008-04-01

    Tooth discoloration varies in etiology, appearance, localization, severity, and adhesion to tooth structure. It can be defined as being extrinsic or intrinsic on the basis of localization and etiology. In this review of the literature, various causes of tooth discoloration, different bleaching materials, and their applications to endodontically treated teeth have been described. In the walking bleach technique the root filling should be completed first, and a cervical seal must be established. The bleaching agent should be changed every 3-7 days. The thermocatalytic technique involves placement of a bleaching agent in the pulp chamber followed by heat application. At the end of each visit the bleaching agent is left in the tooth so that it can function as a walking bleach until the next visit. External bleaching of endodontically treated teeth with an in-office technique requires a high concentration gel. It might be a supplement to the walking bleach technique, if the results are not satisfactory after 3-4 visits. These treatments require a bonded temporary filling or a bonded resin composite to seal the access cavity. There is a deficiency of evidence-based science in the literature that addresses the prognosis of bleached nonvital teeth. Therefore, it is important to always be aware of the possible complications and risks that are associated with the different bleaching techniques.

  14. Differential Response of Coral Assemblages to Thermal Stress Underscores the Complexity in Predicting Bleaching Susceptibility.

    Directory of Open Access Journals (Sweden)

    Loke Ming Chou

    Full Text Available Coral bleaching events have been predicted to occur more frequently in the coming decades with global warming. The susceptibility of corals to bleaching during thermal stress episodes is dependent on many factors and an understanding of these underlying drivers is crucial for conservation management. In 2013, a mild bleaching episode ensued in response to elevated sea temperature on the sediment-burdened reefs in Singapore. Surveys of seven sites highlighted variable bleaching susceptibility among coral genera-Pachyseris and Podabacia were the most impacted (31% of colonies of both genera bleached. The most susceptible genera such as Acropora and Pocillopora, which were expected to bleach, did not. Susceptibility varied between less than 6% and more than 11% of the corals bleached, at four and three sites respectively. Analysis of four of the most bleached genera revealed that a statistical model that included a combination of the factors (genus, colony size and site provided a better explanation of the observed bleaching patterns than any single factor alone. This underscored the complexity in predicting the coral susceptibility to future thermal stress events and the importance of monitoring coral bleaching episodes to facilitate more effective management of coral reefs under climate change.

  15. YouTube as a source of information on skin bleaching: a content analysis.

    Science.gov (United States)

    Basch, C H; Brown, A A; Fullwood, M D; Clark, A; Fung, I C-H; Yin, J

    2017-12-18

    Skin bleaching is a common, yet potentially harmful body modification practice. To describe the characteristics of the most widely viewed YouTube™ videos related to skin bleaching. The search term 'skin bleaching' was used to identify the 100 most popular English-language YouTube videos relating to the topic. Both descriptive and specific information were noted. Among the 100 manually coded skin-bleaching YouTube videos in English, there were 21 consumer-created videos, 45 internet-based news videos, 30 television news videos and 4 professional videos. Excluding the 4 professional videos, we limited our content categorization and regression analysis to 96 videos. Approximately 93% (89/96) of the most widely viewed videos mentioned changing how you look and 74% (71/96) focused on bleaching the whole body. Of the 96 videos, 63 (66%) of videos showed/mentioned a transformation. Only about 14% (13/96) mentioned that skin bleaching is unsafe. The likelihood of a video selling a skin bleaching product was 17 times higher in internet videos compared with consumer videos (OR = 17.00, 95% CI 4.58-63.09, P YouTube video on skin bleaching was uploaded by an internet source. Videos made by television sources mentioned more information about skin bleaching being unsafe, while consumer-generated videos focused more on making skin-bleaching products at home. © 2017 British Association of Dermatologists.

  16. Thermal stress exposure, bleaching response, and mortality in the threatened coral Acropora palmata.

    Science.gov (United States)

    Williams, D E; Miller, M W; Bright, A J; Pausch, R E; Valdivia, A

    2017-11-15

    Demographic data for Elkhorn coral, Acropora palmata, and in situ water temperature data from seven upper Florida Keys (USA) reefs revealed three warm thermal stress events between 2010 and 2016. During a mild bleaching event in 2011, up to 59% of colonies bleached, but no mortality resulted. In both 2014 and 2015, severe and unprecedented bleaching was observed with up to 100% of colonies bleached. A. palmata live tissue cover declined by one-third following the 2014-2015 events. Colony mortality of mildly- and non-bleached colonies did not differ but increased significantly with more severe bleaching. Increased bleaching prevalence corresponded to maximum daily average water temperatures above 31.3°C. However, the cumulative days with daily average exceeding 31.0°C provided a better predictor of bleaching response. The bleaching response of surviving colonies in 2015 was not consistent with acclimatization as most individual colonies bleached at least as badly as in 2014. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Development of bioenergy technology for rural micro mills production of milk, ice and bio fertilizer; Desenvolvimento de tecnologia de bioenergia rural para micro usinas de producao de leite, gelo e bio fertilizante

    Energy Technology Data Exchange (ETDEWEB)

    Selvam, Pagandai V. Pannir; Almeida, Louizy Minora C.A. de; Israel, S.B.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Quimica], e-mail: pannirbr@gmail.com

    2008-07-01

    The generation of thermal energy is the great importance for the agribusiness of dairy industry to conservation the quality of milk, taking into account that the electricity is the main source currently used for the thermal energy input. The small agribusiness dairy industry currently practiced in Brazil faces several problems related to the cost of electricity and the distance of rural properties of networks of power. In the current scenario of Brazilian dairy production, there is need for the generation of cold for the milk cooling, and also the heat for the production of hot water around 50 deg C to 60 deg C and also for cleaning of equipment used for milk production and processing. The main objective of this study is the modeling and simulation of integrated recovery process of solid waste, effluents and bioconversion. The specific project objectives are: comparison study of options and technological routes of low cost material for power generation using conventional and innovative digester; study of new technologies in the use of organic waste for anaerobic digestion for biogas and fertilizer production; enabling the use of low cost digesters with appropriate technology and alternative materials (composites); minimize problems such as environmental pollution and shortage of electricity in rural agroindustry related to milk. A system was developed for energy generating based on the work of UNICAMP (Universidade Estadual de Campinas) using the water-water heat pump for simultaneous production of ice for cooling of milk and hot water for cleaning and disinfecting facilities and equipment. The results obtained in this project were done using process simulation software Superpro design. (author)

  18. From research to innovation: The case of biotechnical pulp bleaching

    Energy Technology Data Exchange (ETDEWEB)

    Miettinen, R.

    1996-05-01

    The paper studies the emergence and development of a research-based innovation, enzyme-aided bleaching of kraft pulp. The idea of a new bleaching method was formulated in a meeting at the Biotechnical Laboratory of Technical Research Centre of Finland (VTT) in January 1984. The method was based on the use of hemicellulases. The Biotechnology Laboratory has actively studied hemicellulases for several years and they were hence immediately available for experiments. The Biotechnology Laboratory collaborated with the Fibre Chemistry Laboratory of the Finnish Pulp and Paper Research Institute (FPPRI), which knew different kinds of pulps and was skilled in the analysis of their paper technical qualities. With this combination of knowledge the results were achieved without delay.

  19. Effects of bleaching on mercury ion release from dental amalgam.

    Science.gov (United States)

    Al-Salehi, S K

    2009-03-01

    The chemical reactions that take place at the amalgam surface when exposed to bleaching agents are not well-understood. It is known, however, that mercury ions are released from dental amalgam when bleached. We hypothesized that increasing concentrations of hydrogen peroxide are more effective than water at increasing mercury ion release from dental amalgam. We prepared dental amalgam discs (n = 65) by packing amalgam into cylindrical plastic molds and divided them into 13 equal groups of 5 discs each. The discs in each group were individually immersed in either 0%, 3.6%, 6%, or 30% (w/v) hydrogen peroxide at exposure periods of 1, 8, 48, and 168 hrs. Samples were taken for mercury ion release determination by inductively coupled plasma mass spectrometry. There were significant increases in mercury release between control and all other hydrogen peroxide concentrations at all exposure times (p < 0.05).

  20. Multicolor bleach-rate imaging enlightens in vivo sterol transport

    DEFF Research Database (Denmark)

    Wüstner, Daniel; Sage, Daniel

    2011-01-01

    , dehydroergosterol (DHE) in the genetically tractable model organism Caenorhabditis elegans (C. elegans). DHE is structurally very similar to cholesterol and ergosterol, two sterols used by the sterol-auxotroph nematode. We developed a new computational method measuring fluorophore bleaching kinetics at every pixel...... with a lysosomal marker, GFP-LMP1. Our new methods hold great promise for further studies on endosomal sterol transport in C. elegans....

  1. Fracture resistance of teeth submitted to several internal bleaching protocols.

    Science.gov (United States)

    Leonardo, Renato de Toledo; Kuga, Milton Carlos; Guiotti, Flávia Angélica; Andolfatto, Carolina; Faria-Júnior, Norberto Batista de; Campos, Edson Alves de; Keine, Kátia Cristina; Dantas, Andrea Abi Rached

    2014-03-01

    The aim of this study was to evaluate the fracture resistance of teeth submitted to several internal bleaching protocols using 35% hydrogen peroxide (35HP), 37% carbamide peroxide (37CP), 15% hydrogen peroxide with titanium dioxide nanoparticles (15HPTiO2) photoactivated by LED-laser or sodium perborate (SP). After endodontic treatment, fifty bovine extracted teeth were divided into five groups (n = 10): G1-unbleached; G2-35HP; G3-37CP; G4-15HPTiO2 photoactivated by LED-laser and G5-SP. In the G2 and G4, the bleaching protocol was applied in 4 sessions, with 7 days intervals between each session. In the G3 and G5, the materials were kept in the pulp teeth for 21 days, but replaced every 7 days. After 21 days, the teeth were subjected to compressive load at a cross head speed of 0.5 mm/min, applied at 135° to the long axis of the root using an eletromechanical testing machine, until teeth fracture. The data were submitted to ANOVA and Tukey tests (α = 5%). The 35HP, 37CP, 15HPTiO2 and SP showed similar fracture resistance teeth reduction (p > 0.05). All bleaching treatments reduced the fracture resistance compared to unbleached teeth (p endodontically-treated teeth, but there were no differences between each other. There are several internal bleaching protocols using hydrogen peroxide in different concentrations and activation methods. This study evaluated its effects on fracture resistance in endodontically-treated teeth.

  2. Bio Engineering Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Description/History: Chemistry and biology laboratoriesThe Bio Engineering Laboratory (BeL) is theonly full spectrum biotechnology capability within the Department...

  3. Biodegradability and toxicity assessment of bleach plant effluents treated anaerobically.

    Science.gov (United States)

    Chaparro, T R; Botta, C M; Pires, E C

    2010-01-01

    As part of an experimental project on the treatment of bleach plant effluents the results of biodegradability and toxicity assessment of effluents from a bench-scale horizontal anaerobic immobilized bioreactor (HAIB) are discussed in this paper. The biodegradability of the bleach plant effluents from a Kraft pulp mill treated in the HAIB was evaluated using the modified Zahn-Wellens test. The inoculum came from a pulp mill wastewater treatment plant and the dissolved organic carbon (DOC) was used as the indicator of organic matter removal. The acute and chronic toxicity removal during the anaerobic treatment was estimated using Daphnia similis and Ceriodaphnia silvestrii respectively. Moreover, the evaluation of chromosome aberrations (CA), micronucleus frequencies (MN) and mitotic index (IM) in Allium cepa cells were used as genotoxicity indicators. The results indicate that the effluents from the anaerobic reactor are amenable to aerobic polishing. Acute and chronic toxicity were reduced by 90 and 81%, respectively. The largest CA and MN incidence in the meristematic cells of A. cepa were observed after exposure to the raw bleach plant effluent. The HAIB was able to reduce the acute and chronic toxicity as well as chromosome aberrations and the occurrence of micronucleus.

  4. Fracture resistance of bleached teeth restored with different procedures

    Directory of Open Access Journals (Sweden)

    Matheus Coelho Bandéca

    2012-08-01

    Full Text Available This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different non-metallic post. Eighty mandibular incisors were endodontically treated and randomly divided in 10 groups (n = 8: G1- restored with composite resin (CR, G2- CR + fiber-reinforced composite post (FRC, Everstick post, Sticktech cemented with resin cement self-etch adhesive (RCS, Panavia F 2.0, Kuraray, G3- CR + FRC + self-adhesive resin cement (SRC, Breeze, Pentral Clinical, G4- CR+ glass fiber post (GF, Exacto Post, Angelus + RCS, G5- CR + GF + SRC. The G6 to G10 were bleached with hydrogen peroxide (HP and restored with the same restorative procedures used for G1 to G5, respectively. After 7 days storage in artificial saliva, the specimens were submitted to the compressive strength test (N at 0.5 mm/min cross-head speed and the failure pattern was identified as either reparable (failure showed until 2 mm below the cement-enamel junction or irreparable (the failure showed <2 mm or more below the cement-enamel. Data were analyzed by ANOVA and Tukey test (α = 0.05. No significant difference (p < 0.05 was found among G1 to G10. The results suggest that intracoronal bleaching did not significantly weaken the teeth and the failure patterns were predominately reparable for all groups. The non-metallic posts in these teeth did not improve fracture resistance.

  5. Peroxide dental bleaching via laser microchannels and tooth color measurements

    Science.gov (United States)

    Altshuler, Gregory; Belikov, Andrey; Skrypnik, Alexei; Feldchtein, Felix; Pushkareva, Alexandra; Shatilova, Ksenia; Cernavin, Igor; Tuchin, Valery

    2016-12-01

    The aim of this study was to use microchannels drilled by an Er:YAG laser into a human tooth through the enamel into the dentin for direct injection of hydrogen peroxide (HP) to produce a minimally invasive, rapid, tooth bleaching effect. The experiments were conducted in vitro. Five microchannels with a diameter of ˜200 μm and a depth of ˜2 mm were drilled through the palatal side of a human tooth crown using the microbeam of an Er:YAG-laser with a wavelength of 2.94 μm. After injection of an aqueous solution of 31%-HP through the microchannels, the tooth color was evaluated using a VITA shade guide and International Commission on Illumination L*ab color parameters. A tooth model used for the evaluation of the distribution of HP concentration was created and the amount of HP which can be injected into tooth dentin to bleach it safely was estimated. Injection of 1.5±0.1 mm3 of 31%-HP into the tooth led to noticeable bleaching within 3 h and significant improvement of tooth color within 24 h.

  6. Fiscal 1998 R and D project on global environmental industrial technology. R and D result report on environment- friendly production technology (advanced chemical synthesis reactor); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bio reactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For high-efficiency production of substances by bioreactor, study was made on a bio-control mechanism as its elementary technology. On the study of breeding technology by expression control, the structure design of a control region and development of new expression vectors had been finished, and study was made on breeding of high-efficiency recombinant production cells by using candidate expression vectors. On the study of breeding technology by multi-stage enzyme reaction control, the enzyme gene of a system synthesizing cysteine from glycerol was searched, and hydroxypyruvaldehyde hydrogenase gene was isolated as substance production model. Cysteine production Escherichia coli combined with serineacetyl transferase gene was also prepared. In addition, study started on cloning of hydroxyacetone oxidase gene. On development of reactor system technology, for conversion of serine to cysteine, study was made on optimization of a reaction condition by theory of enzyme reaction rate. (NEDO)

  7. Non-invasive bleaching of the human lens by femtosecond laser photolysis

    DEFF Research Database (Denmark)

    Kessel, L.; Eskildsen, Lars; Poel, Mike van der

    2010-01-01

    were susceptible to photobleaching by a non-invasive procedure and whether this would lead to optical rejuvenation of the lens. Methodology/Principal Findings: Nine human donor lenses were treated with an 800 nm infra-red femtosecond pulsed laser in a treatment zone measuring 1 x 1 x 0.52 mm. After...... laser treatment the age-induced yellow discoloration of the lens was markedly reduced and the transmission of light was increased corresponding to an optical rejuvenation of 3 to 7 years. Conclusions/Significance: The results demonstrate that the age-induced yellowing of the human lens can be bleached...... by a non-invasive procedure based on femtosecond laser photolysis. Cataract is a disease associated with old age. At the current technological stage, lens aging is delayed but with a treatment covering the entire lens volume complete optical rejuvenation is expected. Thus, femtosecond photolysis has...

  8. Trace elementary concentration in enamel after dental bleaching using HI-ERDA

    Energy Technology Data Exchange (ETDEWEB)

    Added, N. [GFAA, Depto de Fisica Nuclear, IFUSP, University of Sao Paulo, Travessa R da rua do Matao 187, Cidade Universitaria, Caixa Postal 66318, CEP 05508-970 Sao Paulo, SP (Brazil)]. E-mail: nemitala@dfn.if.usp.br; Rizzutto, M.A. [GFAA, Depto de Fisica Nuclear, IFUSP, University of Sao Paulo, Travessa R da rua do Matao 187, Cidade Universitaria, Caixa Postal 66318, CEP 05508-970 Sao Paulo, SP (Brazil); Curado, J.F. [GFAA, Depto de Fisica Nuclear, IFUSP, University of Sao Paulo, Travessa R da rua do Matao 187, Cidade Universitaria, Caixa Postal 66318, CEP 05508-970 Sao Paulo, SP (Brazil); Francci, C. [School of Dentistry, University of Sao Paulo (Brazil); Markarian, R. [School of Dentistry, University of Sao Paulo (Brazil); Mori, M. [School of Dentistry, University of Sao Paulo (Brazil)

    2006-08-15

    Changes of elementary concentrations in dental enamel after a bleaching treatment with different products, is presented, with special focus on the oxygen contribution. Concentrations for Ca, P, O and C and some other trace elements were obtained for enamel of bovine incisor teeth by HI-ERDA measurements using a {sup 35}Cl incident beam and an ionization chamber. Five groups of teeth with five samples each were treated with a different bleaching agents. Each tooth had its crown sectioned in two halves, one for bleaching test and one the other used as a control. Average values of C/Ca, O/Ca, F/Ca enrichment factors were found. The comparison between bleached and non-bleached halves indicates that bleaching treatment did not affect the mineral structure when low-concentration whitening systems were used. The almost constant oxygen concentration in enamel, suggests little changes due to whitening therapy.

  9. Improving the hydrogen peroxide bleaching efficiency of aspen chemithermomechanical pulp by using chitosan.

    Science.gov (United States)

    Li, Zongquan; Dou, Hongyan; Fu, Yingjuan; Qin, Menghua

    2015-11-05

    The presence of transition metals during the hydrogen peroxide bleaching of pulp results in the decomposition of hydrogen peroxide, which decreases the bleaching efficiency. In this study, chitosans were used as peroxide stabilizer in the alkaline hydrogen peroxide bleaching of aspen chemithermomechanical pulp (CTMP). The results showed that the brightness of the bleached CTMP increased 1.5% ISO by addition of 0.1% chitosan with 95% degree of deacetylation during peroxide bleaching. Transition metals in the form of ions or metal colloid particles, such as iron, copper and manganese, could be adsorbed by chitosans. Chitosans could inhibit the decomposition of hydrogen peroxide catalyzed by different transition metals under alkaline conditions. The ability of chitosans to inhibit peroxide decomposition depended on the type of transition metals, chitosan concentration and degree of deacetylation applied. The addition of chitosan slightly reduced the concentration of the hydroxyl radical formed during the hydrogen peroxide bleaching of aspen CTMP. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Bio fuels price; El precio de los biocombustibles

    Energy Technology Data Exchange (ETDEWEB)

    Rotman, D.

    2008-07-01

    he process of producing ethanol from corn is very expensive. The best bio-fuel is very far from the service stations and the farmers show difficulties to change his work methods. Really have we a suitable technology to produce bio-fuels?.

  11. Natural Zeolite Sample and Investigation Its Use in Oil Bleaching Sector

    Science.gov (United States)

    Bilgin, Oyku

    2017-12-01

    In the sector of oil bleaching, the stored raw oil is subjected to physical and chemical methods such as degumming, neutralization, bleaching, deodorization and winterization. In the process of oil bleaching, the selection of correct bleaching earth in accordance with oil characteristics matters so much. Bleaching earth is an inorganic product used in removing impurities being available within the structures of vegetable, animal oil (sunflower, soya, corn, palm, tallow, rapeseed, fish oils…etc.) and fatty acids, mineral oils (glycerine, paraffin, mineral motor oils. etc.) with the adsorption process. The factors such as low cost of oil bleaching earth, low ratio of oil retaining, high bleaching capacity in spite of using them in small amounts, filter’s delayed blocking by the earth and non-increase of the free acidity of the oil should be taken into consideration. Bleaching earths are processed with some acids in order to widen their surface areas. During this process, a certain amount of acid is left within oil bleaching earths even if it is very little. These acids also increase oil’s acidity by oxidizing oil in the course of bleaching process. In this study, zeolite sample taken from Manisa -Demirci region was used. Following the processes of crushing and sieving, zeolite sample was subjected to chemical analyses according to their grain thickness, microscopic examination, the analyses of XRD and cation exchange capacity and their ore characteristics were determined. Afterwards, it was searched whether zeolite sample has oil bleaching ability or not or whether it can be used as oil bleaching earth or not.

  12. Durability of bleaching results achieved with 15% carbamide peroxide and 38% hydrogen peroxide in vitro.

    Science.gov (United States)

    Knösel, Michael; Reus, Monika; Rosenberger, Albert; Attin, Thomas; Ziebolz, Dirk

    2011-01-01

    The aim of this study was to assess the durability of bleaching results achieved with (1) 15% carbamide peroxide home bleaching and (2) 38% hydrogen peroxide in-office bleaching. A total of 231 extracted anterior teeth were randomly divided into three groups (n = 77 in each group) with comparable mean baseline L*-values (68.24 ± 0.8): a non-bleached control group A, a 15% carbamide peroxide group B (5 bleaching intervals of 8 hours), and a 38% hydrogen peroxide group C (3 intervals of 15 minutes). Durability of bleaching was assessed by comparing CIE-L*a*b* data after intervals of 2, 4, 12, and 26 weeks from baseline. Both bleaching regimes initially produced a highly significant increase in lightness parameter L*, with no significant difference between the respective bleaching regimes (B: 68.23 / 72.48; C: 68.32 / 73.25). Six months after starting the trial, L*-values for group B yielded no significant differences compared to baseline (69.55), whereas L*-values for group C were still significantly raised (69.91), despite a highly significant decrease when compared to initial bleaching results. In both treatment groups, there was a lasting response to bleaching in terms of CIE-a* and -b* value decreases. Results for both home- and in-practice regimes were found to be similar for about 12 weeks. However, in-office results were longer lasting, despite the shorter treatment intervals. Summarized bleaching effects, in terms of delta E values, revealed no significant differences between treatment groups and the control group after 6 months, indicating an abatement of the bleaching results achieved.

  13. Understanding bio-economics

    NARCIS (Netherlands)

    Patel, M.K.

    2008-01-01

    New plants for production of bio-based fuels, chemicals or plastics are being set up at an accelerating pace. However, this transition towards bio-based fuels, feedstocks and chemicals has not come without consequences. Increased demand has pushed up prices of key agricultural products such as maize

  14. System analysis of CO{sub 2} sequestration from biomass cogeneration plants (Bio-CHP-CCS). Technology, economic efficiency, sustainability; Systemanalyse der CO{sub 2}-Sequestrierung aus Biomasse-Heizkraftwerken (Bio-KWK-CCS). Technik, Wirtschaftlichkeit, Nachhaltigkeit

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, Claus

    2014-10-15

    In the present work a system analysis is carried out to determine the extent to which a combination of the three areas of energetic biomass use, combined heat and power (CHP) and CO{sub 2} sequestration (CCS - Carbon Capture and Storage) is fundamentally possible and meaningful. The term ''CO{sub 2} sequestration'' refers to the process chain from CO{sub 2} capture, CO{sub 2} transport and CO{sub 2} storage. While the use of biomass in combined heat and power plants is a common practice, CO{sub 2} sequestration (based on fossil fuels) is at the research and development stage. A combination of CCS with biomass has so far been little studied, a combination with combined heat and power plants has not been investigated at all. The two technologies for the energetic use of biomass and cogeneration represent fixed variables in the energy system of the future in the planning of the German federal government. According to the lead scenario of the Federal Ministry of the Environment, electricity generation from biomass is to be almost doubled from 2008 to 2020. At the same time, the heat generated in cogeneration is to be trebled [cf. Nitsch and Wenzel, 2009, p. 10]. At the same time, the CCS technology is to be used in half of all German coal-fired power plants until 2030 [cf. Krassuki et al., 2009, p. 17]. The combination of biomass and CCS also represents an option which is conceivable for the German federal policy [cf. Bundestag, 2008b, p. 4]. In addition, the CCS technology will provide very good export opportunities for the German economy in the future [cf. Federal Government, 2010, p. 20]. The combination of biomass combined heat and power plants with CCS offers the interesting opportunity to actively remove CO{sub 2} from the atmosphere as a future climate protection instrument by means of CO{sub 2} neutrality. Therefore, in the energy concept of the German federal government called for a storage project for industrial or biogenic CO{sub 2

  15. Production of Hydrogen from Bio-ethanol

    International Nuclear Information System (INIS)

    Fabrice Giroudiere; Christophe Boyer; Stephane His; Robert Sanger; Kishore Doshi; Jijun Xu

    2006-01-01

    IFP and HyRadix are collaborating in the development of a new hydrogen production system from liquid feedstock such as bio-ethanol. Reducing greenhouse gas (GHG) emissions along with high hydrogen yield are the key objectives. Market application of the system will be hydrogen refueling stations as well as medium scale hydrogen consumers including the electronics, metals processing, and oils hydrogenation industries. The conversion of bio-ethanol to hydrogen will be performed within a co-developed process including an auto-thermal reformer working under pressure. The technology will produce high-purity hydrogen with ultralow CO content. The catalytic auto-thermal reforming technology combines the exothermic and endothermic reaction and leads to a highly efficient heat integration. The development strategy to reach a high hydrogen yield target with the bio-ethanol hydrogen generator is presented. (authors)

  16. Effects of bleaching agents and Tooth Mousse(™) on human enamel hardness.

    Science.gov (United States)

    Alkhtib, Asmaa; Manton, David J; Burrow, Michael F; Saber-Samandari, Saeed; Palamara, Joseph E A; Gross, Kārlis A; Reynolds, Eric C

    2013-05-01

    The aim of this laboratory study was to investigate the effect of three commercial bleaching agents and Tooth Mousse(™) containing 10% w/w casein phosphopeptide-amorphous calcium phosphate on the hardness of tooth enamel. Sixteen human enamel specimens were exposed to one of three commercial bleaching agents with or without subsequent exposure to Tooth Mousse(™) . Nanoindentation was used to measure the hardness and reduced modulus before and after treatments. When bleaching materials were applied for a short period of time following the manufacturers' instructions, there was an increase in enamel hardness and reduced modulus for some bleaching groups, with no statistically significant difference from the baseline values. After extended bleaching periods a statistically significant decrease in enamel hardness and reduced modulus was found and after applying Tooth Mousse(™) post-bleaching, the hardness and reduced modulus returned to close to baseline values. The application of bleaching agents for an extended period of time significantly decreases enamel hardness and the reduced modulus. The application of Tooth Mousse(™) after bleaching was able to reestablish the baseline enamel hardness and reduced modulus, decreasing the adverse effects of bleaching enamel. © 2012 Wiley Publishing Asia Pty Ltd.

  17. Use of the LM-OSL technique for the detection of partial bleaching in quartz

    DEFF Research Database (Denmark)

    Larsen, N.A.; Bulur, E.; Bøtter-Jensen, L.

    2000-01-01

    is known as linear modulation OSL (LM-OSL). In controlled laboratory conditions, this technique has been employed to study the ease-of-bleaching of the trapped charge in quartz by comparing the OSL curves of quartz aliquots which have been either: (1) fully bleached, followed by a laboratory dose of beta...... -irradiation, or (2) partially bleached, followed by the laboratory beta -dose. The ratio of the OSL signals due to the beta -dose from the partly and fully bleached aliquots is illustrated to be a potential indicator of the degree of optical resetting of the OSL signal in dating material. The key parameter...

  18. Susceptibility to Coffee Staining during Enamel Remineralization Following the In-Office Bleaching Technique

    DEFF Research Database (Denmark)

    Mori, Aline Akemi; Lima, Fernanda Ferruzzi; Benetti, Ana Raquel

    2016-01-01

    PURPOSE: To assess in situ the enamel mineralization level and susceptibility to coffee staining after in-office bleaching. MATERIALS AND METHODS: Thirty-six human dental fragments assembled into intraoral devices were bleached with 35% hydrogen peroxide and treated as follows: (group 1) no contact......-office bleaching was progressively reversed by contact with saliva for 14 days. The whiteness index was not affected by contact with coffee during the remineralization period. CLINICAL SIGNIFICANCE: The results of this in situ study suggest that the mineral loss caused by in-office dental bleaching is minimal...

  19. Comparison of Flexural Strength of Resin Cements After Storing in Different Media and Bleaching Agents.

    Science.gov (United States)

    Geramipanah, Farideh; Rezaei, Susan Mir Mohammad; Jafary, Maryam; Sadighpour, Leyla

    2015-06-01

    The aim of this study was to determine the effects of different storage media and bleaching treatments on the flexural strength of two resin cements (Panavia and BisCem). One hundred rectangular-shaped specimens were prepared with two resin cements and were stored in five media types (n = 10): distilled water (DW), lactic acid (LA), sodium hydroxide (NH), in-office bleaching (OB) and home bleaching (HB). There was significant interaction between the solutions and cements (p except Panavia in OB) (p exception of in-office bleaching.

  20. A Study for Tooth Bleaching via Carbamide Peroxide-Loaded Hollow Calcium Phosphate Spheres

    Directory of Open Access Journals (Sweden)

    Tao Qin

    2016-12-01

    Full Text Available The objective of this study was to investigate if a prolonged bleaching effect of carbamide peroxide-loaded hollow calcium phosphate spheres (HCPS can be achieved. HCPS was synthesized via a hydrothermal reaction method. Carbamide peroxide (CP was-loaded into HCPS by mixing with distilled water as solvent. We developed two bleaching gels containing CP-loaded HCPS: one gel with low HP concentration as at-home bleaching gel, and one with high HP concentration as in-office gel. Their bleaching effects on stained human permanent posterior teeth were investigated by measuring the color difference before and after bleaching. The effect of gels on rhodamine B degradation was also studied. To investigate the potential effect of remineralization of using HCPS, bleached teeth were soaked in phosphate buffer solution (PBS containing calcium and magnesium ions. Both bleaching gels had a prolonged whitening effect, and showed a strong ability to degrade rhodamine B. After soaking in PBS for 3 days, remineralization was observed at the sites where HCPS attached to the teeth surface. CP-loaded HCPS could prolong the HP release behavior and improve the bleaching effect. HCPS was effective in increasing the whitening effect of carbamide peroxide and improving remineralization after bleaching process.

  1. Inflammatory response of human dental pulp to at-home and in-office tooth bleaching

    Directory of Open Access Journals (Sweden)

    Maysa Magalhães Vaz

    Full Text Available ABSTRACT Tooth bleaching is a technique of choice to obtain a harmonious smile, but bleaching agents may damage the dental pulp. Objective: This study evaluated the inflammatory responses of human dental pulp after the use of two bleaching techniques. Material and Methods: Pulp samples were collected from human third molars extracted for orthodontic reasons and divided into three groups: control - no tooth bleaching (CG (n=7; at-home bleaching with 15% carbamide peroxide (AH (n = 10, and in-office bleaching with 38% hydrogen peroxide (IO (n=12. Pulps were removed and stained with hematoxylin-eosin for microscopic analysis of inflammation intensity, collagen degradation, and pulp tissue organization. Immunohistochemistry was used to detect mast cells (tryptase+, blood vessels (CD31+, and macrophages (CD68+. Chi-square, Kruskal-Wallis, and Mann Whitney tests were used for statistical analysis. The level of significance was set at p0.05. No mast cells were found in the pulp samples analyzed. Conclusion: In-office bleaching with 38% hydrogen peroxide resulted in more intense inflammation, higher macrophages migration, and greater pulp damage then at-home bleaching with 15% carbamide peroxide, however, these bleaching techniques did not induce migration of mast cells and increased the number of blood vessels.

  2. BioSTEC 2017: 10th International Joint Conference on Biomedical Engineering Systems and Technologies : Proceedings Volume 5: HealthInf

    NARCIS (Netherlands)

    2017-01-01

    This book contains the proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2017). This conference is sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC), in cooperation with the ACM

  3. New Insights on Degumming and Bleaching Process Parameters on The Formation of 3-Monochloropropane-1,2-Diol Esters and Glycidyl Esters in Refined, Bleached, Deodorized Palm Oil.

    Science.gov (United States)

    Sim, Biow Ing; Muhamad, Halimah; Lai, Oi Ming; Abas, Faridah; Yeoh, Chee Beng; Nehdi, Imededdine Arbi; Khor, Yih Phing; Tan, Chin Ping

    2018-04-01

    This paper examines the interactions of degumming and bleaching processes as well as their influences on the formation of 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters in refined, bleached and deodorized palm oil by using D-optimal design. Water degumming effectively reduced the 3-MCPDE content up to 50%. Acid activated bleaching earth had a greater effect on 3-MCPDE reduction compared to natural bleaching earth and acid activated bleaching earth with neutral pH, indicating that performance and adsorption capacities of bleaching earth are the predominant factors in the removal of esters, rather than its acidity profile. The combination of high dosage phosphoric acid during degumming with the use of acid activated bleaching earth eliminated almost all glycidyl esters during refining. Besides, the effects of crude palm oil quality was assessed and it was found that the quality of crude palm oil determines the level of formation of 3-MCPDE and glycidyl esters in palm oil during the high temperature deodorization step of physical refining process. Poor quality crude palm oil has strong impact towards 3-MCPDE and glycidyl esters formation due to the intrinsic components present within. The findings are useful to palm oil refining industry in choosing raw materials as an input during the refining process.

  4. Effect of coffe and a cola-based soft drink on the color stability of bleached bovine incisors considering the time elapsed after bleaching

    Directory of Open Access Journals (Sweden)

    Rodrigo PIROLO

    2014-12-01

    Full Text Available There is no consensus about the waiting time necessary for the patient to start consuming beverages containing colorants again after bleaching. Objective: To evaluate the influence of beverages with coloring agents on bleached bovine incisors considering the time elapsed after bleaching. Materials and methods: Sixty bovine incisors were bleached with 35% hydrogen peroxide for in-office use (Whiteness HP Max and divided into 10 groups. The color was evaluated with a spectrophotometer (Spectro Shade MICRO before and after bleaching, employing the CIE-Lab system. After bleaching, the teeth were exposed for 5 min to coffee or cola-based soft drink (CBSD at different periods after bleaching: 10 min, 1 h, 24 h, 48 h, and 72 h. Color (∆E and lightness (∆L variations were obtained from the CIE-Lab coordinates. Data were subjected to two-way ANOVA and Tukey HSD tests (p<0.05. Results: Significant differences were observed between groups for both the ∆L and ∆E values (p<0.001. All specimens presented a decrease in brightness (negative ∆L. The highest ∆E values were observed for teeth stained with a CBSD at 10 min and 1 h (4.12 and 4.16, respectively. Teeth pigmented with coffee presented ∆E values below 3.3 units for all evaluation times. Conclusion: The exposure to coffee after bleaching causes less color changes than the exposure to a CBSD regardless of the time after bleaching.

  5. Survey on the possibility of international cooperation on production technology of biohydrogen; Bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    R and D on the production technology of hydrogen by biotechnology is one of the effective projects for worldwide energy supply technology and global environment protection technology in the 21st century. The research trend of various institutions promoting R and D on production technology of biohydrogen in the U.S.A. and other countries was surveyed together with the possibility of international cooperation. The production technology of biohydrogen is being watched over the world. Various researches are in promotion corresponding to environmental conditions as follows: search of not only photosynthetic bacteria but also such bacteria with hydrogen productivity as algae and anaerobic bacteria, and the gene engineering study for improving the hydrogen productivity of target microorganisms. All the institutions visited for this survey have great expectations in wide cooperative study in the future. On the possibility of international cooperation on the production technology of biohydrogen, the further precise survey should be promoted for developing more effective technologies based on the previous survey results. 156 refs., 10 tabs.

  6. What can law do for the development of bio-economy?

    Science.gov (United States)

    Chang-Qiu, Liu

    2012-03-01

    Bio-technology has become a new impeller to the development of the world economy since the 1970's. The development of bio-economy has two sides for mankind which calls for intervention by law. During the legislation of bioeconomy, some special principles should be esteemed and observed by legislators. It is necessary for the healthy development of bio-economy.

  7. Overcoming barriers to increased bio-energy use. Suggestions for a high impact policy

    International Nuclear Information System (INIS)

    Chanakya, H.N.; Ravindranath, N.H.

    1997-01-01

    A few options that are likely to result in a high impact policy towards ensuring increased use of bio-energy in the developing world are discussed. Such options are: Moving towards greater energy security /guarantee, bio-energy technology transfer platforms, documentation in bio-energy businesses, removing risk perceptions in financing, increasing private entrepreneur stakes, etc. (K.A.)

  8. Research of environmental bioecosensing technology using ecological information. Part 2; Seitaikei joho ni yoru kankyo bio ecosencing gijutsu ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Basic considerations of exploring and cultivating environmental reporter organisms are summarized. Mechanism of genetic engineering amplification and molecular biological amplification, and approach to combining them to a hardware as a bioindicator system are investigated. For the current status of molecular biological measurement technology for measuring ecological environment and its application, environmental diagnosis from a phyropathological viewpoint, environmental diagnosis using microorganisms, test fabrication of genetic sensor, and overseas examples of environmental monitoring network are described. For the application of ecological information and functions for developing innovative environmental remediation technology, issues and potential areas for research and development regarding the bioremediation technology in which the US has achieved a progress for the benefit of soil environment remediation are summarized. For the phytoremediation, an area of bioremediation, the metabolism of microorganisms which live in the rhizosphere, and the technology for controlling the microorganisms in the soil through plants are investigated. 66 refs., 50 figs., 17 tabs.

  9. Spatial Analysis of BioAmbients

    DEFF Research Database (Denmark)

    Nielson, Hanne Riis; Nielson, Flemming; Pilegaard, Henrik

    2004-01-01

    Programming language technology can contribute to the development and understanding of Systems Biology by providing formal calculi for specifying and analysing the dynamic behaviour of biological systems. Our focus is on BioAmbients, a variation of the ambient calculi developed for modelling...

  10. Microfluidics and photonics for Bio-System-on-a-Chip: a review of advancements in technology towards a microfluidic flow cytometry chip.

    Science.gov (United States)

    Godin, Jessica; Chen, Chun-Hao; Cho, Sung Hwan; Qiao, Wen; Tsai, Frank; Lo, Yu-Hwa

    2008-10-01

    Microfluidics and photonics come together to form a field commonly referred to as 'optofluidics'. Flow cytometry provides the field with a technology base from which both microfluidic and photonic components be developed and integrated into a useful device. This article reviews some of the more recent developments to familiarize a reader with the current state of the technologies and also highlights the requirements of the device and how researchers are working to meet these needs.

  11. Changes in coral-associated microbial communities during a bleaching event.

    Science.gov (United States)

    Bourne, David; Iida, Yuki; Uthicke, Sven; Smith-Keune, Carolyn

    2008-04-01

    Environmental stressors such as increased sea surface temperatures are well-known for contributing to coral bleaching; however, the effect of increased temperatures and subsequent bleaching on coral-associated microbial communities is poorly understood. Colonies of the hard coral Acropora millepora were tagged on a reef flat off Magnetic Island (Great Barrier Reef) and surveyed over 2.5 years, which included a severe bleaching event in January/February 2002. Daily average water temperatures exceeded the previous 10-year average by more than 1 degrees C for extended periods with field-based visual surveys recording all tagged colonies displaying signs of bleaching. During the bleaching period, direct counts of coral zooxanthellae densities decreased by approximately 64%, before recovery to pre-bleaching levels after the thermal stress event. A subset of three tagged coral colonies were sampled through the bleaching event and changes in the microbial community elucidated. Denaturing gradient gel electrophoresis (DGGE) analysis demonstrated conserved bacterial banding profiles between the three coral colonies, confirming previous studies highlighting specific microbial associations. As coral colonies bleached, the microbial community shifted and redundancy analysis (RDA) of DGGE banding patterns revealed a correlation of increasing temperature with the appearance of Vibrio-affiliated sequences. Interestingly, this shift to a Vibrio-dominated community commenced prior to visual signs of bleaching. Clone libraries hybridized with Vibrio-specific oligonucleotide probes confirmed an increase in the fraction of Vibrio-affiliated clones during the bleaching period. Post bleaching, the coral microbial associations again shifted, returning to a profile similar to the fingerprints prior to bleaching. This provided further evidence for corals selecting and shaping their microbial partners. For non-bleached samples, a close association with Spongiobacter-related sequences were

  12. Nanotribological and Nanomechanical Properties Changes of Tooth After Bleaching and Remineralization in Wet Environment

    Science.gov (United States)

    Yu, Dandan; Gao, Shanshan; Min, Jie; Zhang, Qianqian; Gao, Shuai; Yu, Haiyang

    2015-12-01

    Teeth bleaching cases had increased with people's desire for oral aesthetic; however, bleached teeth would still undertake chewing actions and remineralizing process in saliva. Nanotribological and nanomechanical properties are proper displays for dental performance of bleached teeth. The purpose of the research was to reveal the effect of bleaching and remineralization on the nanotribological and nanomechanical properties of teeth in wet environment. The specimens were divided into four groups according to the bleaching products used: 12 % hydrogen peroxide (HP) (12HP group); 15 % carbamide peroxide (CP) (15CP group); 35 % CP (35CP group); and artificial saliva (control group). The nanotribological and nanomechanical property changes of tooth enamel after bleaching and remineralization were evaluated respectively by nanoscratch and nanoindentation tests in wet environment, imitating the wet oral environment. The morphology changes were evaluated by statistical parametric mapping (SPM) and scanning electron microscopy (SEM). After bleaching, 12HP group and 15CP group showed increased scratch depth with more pile ups on the scratch edges, decreased nanohardness, and corroded surface appearance. While the 35CP group showed an increase in nanoscratch depth, no change in nanohardness and surface appearance was observed. The control group showed no change in these measurements. After remineralization, the three bleaching groups showed decreased nanoscratch depth and no change of nanohardness compared with the bleached teeth. And the control group showed no changes in nanotribological and nanomechanical properties. The nanotribological and nanomechanical properties of the 12HP group and 15CP group were affected by bleaching, but the nanotribological properties recovered partly and the nanomechanical properties got no change after 1 week of remineralization. As for the 35CP group, the nanotribological properties were influenced and the nanomechanical properties were not

  13. Contrasting patterns of coral bleaching susceptibility in 2010 suggest an adaptive response to thermal stress.

    Directory of Open Access Journals (Sweden)

    James R Guest

    Full Text Available BACKGROUND: Coral bleaching events vary in severity, however, to date, the hierarchy of susceptibility to bleaching among coral taxa has been consistent over a broad geographic range and among bleaching episodes. Here we examine the extent of spatial and temporal variation in thermal tolerance among scleractinian coral taxa and between locations during the 2010 thermally induced, large-scale bleaching event in South East Asia. METHODOLOGY/PRINCIPAL FINDINGS: Surveys to estimate the bleaching and mortality indices of coral genera were carried out at three locations with contrasting thermal and bleaching histories. Despite the magnitude of thermal stress being similar among locations in 2010, there was a remarkable contrast in the patterns of bleaching susceptibility. Comparisons of bleaching susceptibility within coral taxa and among locations revealed no significant differences between locations with similar thermal histories, but significant differences between locations with contrasting thermal histories (Friedman = 34.97; p<0.001. Bleaching was much less severe at locations that bleached during 1998, that had greater historical temperature variability and lower rates of warming. Remarkably, Acropora and Pocillopora, taxa that are typically highly susceptible, although among the most susceptible in Pulau Weh (Sumatra, Indonesia where respectively, 94% and 87% of colonies died, were among the least susceptible in Singapore, where only 5% and 12% of colonies died. CONCLUSIONS/SIGNIFICANCE: The pattern of susceptibility among coral genera documented here is unprecedented. A parsimonious explanation for these results is that coral populations that bleached during the last major warming event in 1998 have adapted and/or acclimatised to thermal stress. These data also lend support to the hypothesis that corals in regions subject to more variable temperature regimes are more resistant to thermal stress than those in less variable environments.

  14. Evaluation of the bleached human enamel by Scanning Electron Microscopy

    DEFF Research Database (Denmark)

    Miranda, Carolina Baptista; Pagani, Clovis; Benetti, Ana Raquel

    2005-01-01

    Electron Microscopy (SEM). Materials and Methods: Twenty intact human third molars extracted for orthodontic reasons were randomly divided into four groups (n=5) treated as follows: G1- storage in artificial saliva (control group); G2- four 30-minute applications of 35% carbamide peroxide (total exposure...... analysis performing gold sputter coating under vacuum and were examined using 15kV at 500x and 2000x magnification. Results: Morphological alterations on the enamel surface were similarly detected after bleaching with either 35% carbamide peroxide or 35% hydrogen peroxide. Surface porosities were...

  15. Bio-politics Reflexes” or something about what happens with Bio-politics today

    Directory of Open Access Journals (Sweden)

    Viorella Manolache

    2013-04-01

    Full Text Available Under the pressure dictated by Western modernity movements, life finally enters within strategic (long term relationships circuit. The present study establishes that, bio-politics and bio-power denounces the paradigm of politicization of the biological life. Foucault’s late writings confirm the subordination of bio-politics to the technologies of power, which integrate / reduce life to biological continuity of the species, to the objectification of individual body or investigation of self-techniques, that would allow (beyond the corset of the institutional, the (re affirmation of subjectivity as a force or a form of resistance. The present reactivation of the bio model establishes that we cannot evade Foucault’s view, in which, the biology- meeting – politics confirms that, none of the terms no longer retains its original meaning.

  16. LIMITATIONS OF LEGAL ENFORCEMENT IN BIO – MEDICAL WASTE MANAGEMENT IN INDIA

    OpenAIRE

    Pavithra Kumari

    2017-01-01

    Bio medical is generated by the hospital during the diagnosis, treatment of human beings or animals. The form of biomedical waste is solid as well as liquid form. The basic components of bio medical waste consist of human anatomical waste, micro biology and bio technology waste, waste sharps, discarded medicines and cytotoxic drugs, soiled waste, solid waste, liquid waste generated from any of the infected areas, animal waste, incineration ash, chemical waste etc. The bio medical waste gener...

  17. Bleaching augments lipid peroxidation products in pistachio oil and its cytotoxicity

    Science.gov (United States)

    Pistachio consumption is associated with reductions in serum cholesterol and oxidative stress due to their constituents of unsaturated fats, phytosterols, fiber, and antioxidants. Bleaching has been applied to whiten nut shells for antifungal and cosmetic purposes. However, the impact of bleaching o...

  18. Skin bleaching: A neglected form of injury and threat to global skin ...

    African Journals Online (AJOL)

    Skin bleaching: A neglected form of injury and threat to global skin. JC Street, K Gaska, KM Lewis, ML Wilson. Abstract. Skin bleaching is the use of creams, gels, or soaps to lighten the skin and is known to cause a number of injuries, many of which are potentially life-threatening. Despite the growing body of research ...

  19. Re-evaluating luminescence burial doses and bleaching of fluvial deposits using Bayesian computational statistics.

    NARCIS (Netherlands)

    Cunningham, A.C.; Wallinga, J.; Versendaal, Alice; Makaske, A.; Middelkoop, H.; Hobo, N.

    2015-01-01

    The optically stimulated luminescence (OSL) signal from fluvial sediment often contains a remnant from the previous deposition cycle, leading to a partially bleached equivalent-dose distribution. Although identification of the burial dose is of primary concern, the degree of bleaching could

  20. Re-evaluating luminescence burial doses and bleaching of fluvial deposits using Bayesian computational statistics

    NARCIS (Netherlands)

    Cunningham, A. C.; Wallinga, J.; Hobo, N.; Versendaal, A. J.; Makaske, B.; Middelkoop, H.

    2015-01-01

    The optically stimulated luminescence (OSL) signal from fluvial sediment often contains a remnant from the previous deposition cycle, leading to a partially bleached equivalent-dose distribution. Although identification of the burial dose is of primary concern, the degree of bleaching could

  1. WOOD BASIC DENSITY EFFECT OF Eucalyptus grandis x Eucalyptus urophylla CLONES ON BLEACHED PULP QUALITY

    Directory of Open Access Journals (Sweden)

    Sheila Rodrigues dos Santos

    2010-08-01

    Full Text Available The study analyzed the wood basic density effect in two Eucalyptus grandis x Eucalyptus urophylla hybrid clones (440 kg/m3 e 508 kg/m3 on bleached pulp quality (fiber dimensions and physical-mechanical properties. The woods performance on pulping, bleaching and beating results were analyzed. The Kraft pulping was carried out in forced circulation digester in order to obtain 17±1 kappa number targets. The pulps were bleached to 90±1 using delignification oxygen and D0EOPD1 bleaching sequence. Bleached pulp of low basic density clone showed, significantly, lowest revolutions number in the PFI mill to reach tensile index of 70 N.m/g, low Schopper Riegler degree and generated sheets with higher values to bulk and opacity. These characteristics and properties allow concluding that bleached pulp of low basic density clone was the most indicated to produce printing and writing sheets. The bleached pulp of high basic density clone showed higher values of bulk and capillarity Klemm and lower water retention value when analyzed without beating. The bleached pulp of high basic density clone showed more favorable characteristics to the production of tissue papers.

  2. Influence of photo- and thermal bleaching on pre-irradiation low water peak single mode fibers

    Science.gov (United States)

    Yin, Jianchong; Wen, Jianxiang; Luo, Wenyun; Xiao, Zhongyin; Chen, Zhenyi; Wang, Tingyun

    2011-12-01

    Reducing the radiation-induced transmission loss in low water peak single mode fiber (LWP SMF) has been investigated by using photo-bleaching method with 980nm pump light source and using thermal-bleaching method with temperature control system. The results show that the radiation-induced loss of pre-irradiation optical fiber can be reduced effectively with the help of photo-bleaching or thermal-bleaching. Although the effort of photo-bleaching is not as significant as thermal-bleaching, by using photo-bleaching method, the loss of fiber caused by radiation-induced defects can be reduced best up to 49% at 1310nm and 28% at 1550nm in low pre-irradiation condition, the coating of the fiber are not destroyed, and the rehabilitating time is just several hours, while self-annealing usually costs months' time. What's more, the typical high power LASER for photo-bleaching can be 980nm pump Laser Diode, which is very accessible.

  3. Remote Sensing of Coral Bleaching Using Temperature and Light: Progress towards an Operational Algorithm

    Directory of Open Access Journals (Sweden)

    William Skirving

    2017-12-01

    Full Text Available The National Oceanic and Atmospheric Administration’s Coral Reef Watch program developed and operates several global satellite products to monitor bleaching-level heat stress. While these products have a proven ability to predict the onset of most mass coral bleaching events, they occasionally miss events; inaccurately predict the severity of some mass coral bleaching events; or report false alarms. These products are based solely on temperature and yet coral bleaching is known to result from both temperature and light stress. This study presents a novel methodology (still under development, which combines temperature and light into a single measure of stress to predict the onset and severity of mass coral bleaching. We describe here the biological basis of the Light Stress Damage (LSD algorithm under development. Then by using empirical relationships derived in separate experiments conducted in mesocosm facilities in the Mexican Caribbean we parameterize the LSD algorithm and demonstrate that it is able to describe three past bleaching events from the Great Barrier Reef (GBR. For this limited example, the LSD algorithm was able to better predict differences in the severity of the three past GBR bleaching events, quantifying the contribution of light to reduce or exacerbate the impact of heat stress. The new Light Stress Damage algorithm we present here is potentially a significant step forward in the evolution of satellite-based bleaching products.

  4. Severity of the 1998 and 2005 bleaching events in Venezuela, southern Caribbean

    Directory of Open Access Journals (Sweden)

    Sebastián Rodríguez

    2010-10-01

    Full Text Available This study describes the severity of the 2005 bleaching event at 15 reef sites across Venezuela and compares the 1998 and 2005 bleaching events at one of them. During August and September 2005, bleached corals were first observed on oceanic reefs rather than coastal reefs, affecting 1 to 4% of coral colonies in the community (3 reef sites, n=736 colonies. At that time, however, no bleached corals were recorded along the eastern coast of Venezuela, an area of seasonal upwelling (3 reefs, n=181 colonies. On coastal reefs, bleaching started in October but highest levels were reached in November 2005 and January 2006, when 16% of corals were affected among a wide range of taxa (e.g. scleractinians, octocorals, Millepora and zoanthids. In the Acropora habitats of Los Roques (an oceanic reef, no bleached was recorded in 2005 (four sites, n=643 colonies. At Cayo Sombrero, a coastal reef site, bleaching was less severe in 1998 than in 2005 (9% of the coral colonies involving 2 species vs. 26% involving 23 species, respectively. Our results indicate that bleaching was more severe in 2005 than in 1998 on Venezuelan reefs; however, no mass mortality was observed in either of these two events. Rev. Biol. Trop. 58 (Suppl. 3: 189-196. Epub 2010 October 01.

  5. Severity of the 1998 and 2005 bleaching events in Venezuela, southern Caribbean.

    Science.gov (United States)

    Rodríguez, Sebastián; Cróquer, Aldo; Bone, David; Bastidas, Carolina

    2010-10-01

    This study describes the severity of the 2005 bleaching event at 15 reef sites across Venezuela and compares the 1998 and 2005 bleaching events at one of them. During August and September 2005, bleached corals were first observed on oceanic reefs rather than coastal reefs, affecting 1 to 4% of coral colonies in the community (3 reef sites, n = 736 colonies). At that time, however, no bleached corals were recorded along the eastern coast of Venezuela, an area of seasonal upwelling (3 reefs, n = 181 colonies). On coastal reefs, bleaching started in October but highest levels were reached in November 2005 and January 2006, when 16% of corals were affected among a wide range of taxa (e.g. scleractinians, octocorals, Millepora and zoanthids). In the Acropora habitats of Los Roques (an oceanic reef),no bleached was recorded in 2005 (four sites,n = 643 colonies). At Cayo Sombrero, a coastal reef site, bleaching was less severe in 1998 than in 2005 (9% of the coral colonies involving 2 species vs. 26% involving 23 species, respectively). Our results indicate that bleaching was more severe in 2005 than in 1998 on Venezuelan reefs; however, no mass mortality was observed in either of these two events.

  6. [Effect of bleaching agents on the color of indirect and direct composite resins].

    Science.gov (United States)

    Xing, Wenzhong; Jiang, Tao; Chen, Xiaodong; Wang, Yining

    2014-09-01

    To evaluate the effect of bleaching agents on the color of indirect and direct composite resins. Five resin composite materials were tested in this in vitro study. The five composites were as follow: two indirect composite resins (Adoro SR, Ceramage) and three direct composite resins (Filtek Z350, Clearfil Majesty Esthetic, and Gradia Direct Anterior). For each material, twenty disk-shaped specimens were prepared and randomly divided into five groups according to the color parameters of specimens before bleaching treatment. The composite resin specimens were treated by one of five sample solutions which were at-home bleaching agents (10% and 15% carbarmide peroxide), in- office bleaching agents (38% H(2)O(2) and 35%H(2)O(2)) and deionized water (control group). The color parameters of specimens were measured by spectrophotometer at baseline and after bleaching treatments. The color differences (ΔE values) between baseline and post-treatments were calculated. The data of color differences were evaluated statistically using two-way analysis with a significance level of 0.05. The color changes of the resin composites were less than 2.0 after bleaching agent treatment, therefore were not perceptible. Slight increase of L(*) values and decrease of C(*)ab values in color parameters of specimens were observed. There were statistically significant differences in ΔE values for different bleaching treatments and resin materials (P = 0.001). The bleaching agents did not affect the color of indirect and direct composite resins tested.

  7. Comparing Environmental Influences on Coral Bleaching Across and within Species using Clustered Binomial Regression

    Science.gov (United States)

    Differential susceptibility among reef-building coral species can lead to community shifts and loss of diversity as a result of temperature-induced mass bleaching events. However, the influence of the local environment on species-specific bleaching susceptibilities has not been ...

  8. Post-bleaching application of an antioxidant on dentin bond strength of three dental adhesives

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2012-01-01

    Conclusions: The findings suggest that bond strength of resin to bleached dentin may be affected with the adhesive system. Reduced SBS to bleached dentin can be amended by the use of SA as an antioxidizing agent. However, the amount of reversed bond strength subsequent to applying antioxidant might be related to the kind of dental adhesive.

  9. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials.

    Science.gov (United States)

    Bajunaid, Salwa Omar

    2016-01-01

    To assess the hypothesis that there was no difference in effect of 10% and 15% tooth bleaching agents on color stability of materials used for provisional fixed dental prosthesis. Fifteen samples from two materials used for provisional fixed dental prosthesis: methacrylate-based and composite-based materials and 15 preformed polycarbonate crowns soaked in bleaching gel or distilled water. Spectrophotometer recorded color of specimens at baseline, after 3, 7, and 14 days. Data were statistically analyzed using two-factor ANOVA test to compare the color stability of tested materials. Methyl-based provisional material exhibited statistically higher color change when exposed to 10% and 15% bleaching gel (delta EFNx01: 9.0 and 11.1, respectively) as compared to distilled water (delta EFNx01: 2.9). Delta EFNx01 of composite-based material specimens exposed to distilled water was statistically higher (6.3) than specimens exposed to 10% and 15% bleaching gel (1.5 and 1.1, respectively). Polycarbonate crowns showed a statistically lower color change when exposed to 15% (0.9) than to 10% bleaching gel (5.1) or distilled water (5.5). Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

  10. Assessment of acute phase proteins and oxidative stress status of Nigerians using bleaching agents

    International Nuclear Information System (INIS)

    Akibinu, M.O.; Arinola, O.G.; Afolabi, K.A.

    2010-01-01

    The disruption of primary innate immune function of the epidermal layer of the skin accounts for the susceptibility of individuals using bleaching agents to localized or systemic infections. This subverted innate immunity in these people may lead to other pathological conditions. The resultant effects of skin bleaching and phagocytes activation in response to infections have not been studied in Nigerians using bleaching agents. The present study therefore assessed the levels of C-reactive protein (CRP), albumin, total antioxidant potential (TAP), total plasma peroxides (TPP), oxidative stress index (OSI) and malonaldehyde (MDA) in the users bleaching agents. Thirty (30) people who had used bleaching agents for average of 4.9 + 1.2 years participated in this study. They were recruited from various schools and markets within the city of Ibadan, Oyo State, Nigeria. Thirty apparently healthy staffs of University College Hospital Ibadan, Ibaadan, Nigeria, who had never used bleaching agents served as controls. All the subjects used for this study had no metabolic abnormality and tested negative to both HIV and hepatitis B infections. The mean value of TAP (p 0.20) when compared with the controls. Oxidative stress and chronic inflammation are possible consequences of skin bleaching. The users of skin bleaching agents may need antioxidant therapies to avert the risks of oxidative stress. (author)

  11. BioSentinel

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems' (AES) BioSentinel project will develop, prototype, integrate, test, and prepare for the first spaceflight mission of a broadly...

  12. Bio-inspired networking

    CERN Document Server

    Câmara, Daniel

    2015-01-01

    Bio-inspired techniques are based on principles, or models, of biological systems. In general, natural systems present remarkable capabilities of resilience and adaptability. In this book, we explore how bio-inspired methods can solve different problems linked to computer networks. Future networks are expected to be autonomous, scalable and adaptive. During millions of years of evolution, nature has developed a number of different systems that present these and other characteristics required for the next generation networks. Indeed, a series of bio-inspired methods have been successfully used to solve the most diverse problems linked to computer networks. This book presents some of these techniques from a theoretical and practical point of view. Discusses the key concepts of bio-inspired networking to aid you in finding efficient networking solutions Delivers examples of techniques both in theoretical concepts and practical applications Helps you apply nature's dynamic resource and task management to your co...

  13. BioHack*Kolding

    DEFF Research Database (Denmark)

    Wilde, Danielle

    Short Abstract BioHack*Kolding explores the potential of do-it-together biology to support community building in a town that lacks strong science representation, assisting participants to reflect on the bio-potential of their personal, social and political ecologies and to translate their ideas...... an important role in facilitating informed debate around the biological sciences. Yet they cannot reach everyone. BioHack*Kolding asks how community-focused biology initiatives can reach people in smaller towns that lack science representation, so that they too can join the debate and ensure that its...... and experiments inform emerging science to ensure that science is societally relevant? If so, how? Members of BioHack*Kolding gain knowledge through experience, discussion and practice in an evolving, responsive process. This approach is enabling us to gain deeper insights into what design can do to help...

  14. BioSystems

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NCBI BioSystems Database provides integrated access to biological systems and their component genes, proteins, and small molecules, as well as literature...

  15. BioProject

    Data.gov (United States)

    U.S. Department of Health & Human Services — The BioProject database provides an organizational framework to access information about research projects with links to data that have been or will be deposited...

  16. Engineering BioBrick vectors from BioBrick parts

    Directory of Open Access Journals (Sweden)

    Knight Thomas F

    2008-04-01

    Full Text Available Abstract Background The underlying goal of synthetic biology is to make the process of engineering biological systems easier. Recent work has focused on defining and developing standard biological parts. The technical standard that has gained the most traction in the synthetic biology community is the BioBrick standard for physical composition of genetic parts. Parts that conform to the BioBrick assembly standard are BioBrick standard biological parts. To date, over 2,000 BioBrick parts have been contributed to, and are available from, the Registry of Standard Biological Parts. Results Here we extended the same advantages of BioBrick standard biological parts to the plasmid-based vectors that are used to provide and propagate BioBrick parts. We developed a process for engineering BioBrick vectors from BioBrick parts. We designed a new set of BioBrick parts that encode many useful vector functions. We combined the new parts to make a BioBrick base vector that facilitates BioBrick vector construction. We demonstrated the utility of the process by constructing seven new BioBrick vectors. We also successfully used the resulting vectors to assemble and propagate other BioBrick standard biological parts. Conclusion We extended the principles of part reuse and standardization to BioBrick vectors. As a result, myriad new BioBrick vectors can be readily produced from all existing and newly designed BioBrick parts. We invite the synthetic biology community to (1 use the process to make and share new BioBrick vectors; (2 expand the current collection of BioBrick vector parts; and (3 characterize and improve the available collection of BioBrick vector parts.

  17. Forensic Analysis of BIOS Chips

    Science.gov (United States)

    Gershteyn, Pavel; Davis, Mark; Shenoi, Sujeet

    Data can be hidden in BIOS chips without hindering computer performance. This feature has been exploited by virus writers and computer game enthusiasts. Unused BIOS storage can also be used by criminals, terrorists and intelligence agents to conceal secrets. However, BIOS chips are largely ignored in digital forensic investigations. Few techniques exist for imaging BIOS chips and no tools are available specifically for analyzing BIOS data.

  18. Optimization of acid-activated bentonites on bleaching of cotton oil

    International Nuclear Information System (INIS)

    Lacin, O.; Sayan, E.; Kirali, E.G.

    2013-01-01

    Bentonites are commonly used adsorbent on bleaching cotton oil to produce edible oil products. Bleaching capacities of neutralized cotton oil were investigated with acid-activated Arguvan and Kursunlu bentonites. Two models for acid activation of the bentonites were developed by using a full factorial experimental design and central composite design. The parameters used to develop these models were contact time, solid to liquid ratio, acid concentration and moisture of bentonite. By using a constrained optimization program, the maximum bleaching capacities of neutralized cotton oil were determined as 99.99% and 48.5% for Arguvan and Kursunlu, respectively. Optimum results showed that Turkish bentonites (especially Arguvan bentonite) have high bleaching ability and they can be used efficiently to bleach neutralized cotton oil by considering the favorable volume weight, capacity of oil adsorbed and filtration rate. (author)

  19. Effect of Dispersion and Bleaching on the Mechanical and Optical Properties of Deinked Recycled Pulp

    Directory of Open Access Journals (Sweden)

    yahya hamzeh

    2016-06-01

    Full Text Available In this study the effects of oxidative bleaching and mechanical dispersion in different conditions on the optical and mechanical properties of deinked recycled pulp was investigated. Industrial deinked pulp was treated in the different conditions, including dispersion, combined oxidative bleaching during dispersion, and separate dispersion and then oxidative bleaching. Handsheet papers were made from obtained pulps and then scanned and taken photos were analyzed by Digimizer software, version 4.1.1.0 to analysis spot content. Optical and mechanical properties of obtained handsheets were determined and compared. Results indicated that mechanical dispersion decreased spot content and brightness and increased yellowing of the handsheets. Moreover, mechanical dispersion increased dry and wet tensile and burst strengths, water retention value (WRV, ash content and decreased tear strength of handsheet papers. This study revealed that combined dispersing and oxidative bleaching of de-inked pulp provided superior results in comparison to the separate dispersing and oxidative bleaching.

  20. Enamel susceptibility to red wine staining after 35% hydrogen peroxide bleaching

    Directory of Open Access Journals (Sweden)

    Sandrine Bittencourt Berger

    2008-06-01

    Full Text Available Concern has been expressed regarding the staining of enamel surface by different beverages after bleaching. This study investigated the influence of 35% hydrogen peroxide bleaching agents on enamel surface stained with wine after whitening treatments. Flat and polished bovine enamel surfaces were submitted to two commercially available 35% hydrogen peroxide bleaching agents or kept in 100% humidity, as a control group (n = 10. Specimens of all groups were immersed in red wine for 48 h at 37°C, immediately, 24 h or 1 week after treatments. All specimens were ground into powder and prepared for the spectrophotometric analysis. Data were subjected to two-way analysis of variance and Fisher's PLSD test at 5% significance level. The amount of wine pigments uptake by enamel submitted to bleaching treatments was statistically higher than that of control group, independently of the evaluation time. Results suggested that wine staining susceptibility was increased by bleaching treatments.

  1. Spatial and temporal patterns of mass bleaching of corals in the Anthropocene

    KAUST Repository

    Hughes, Terry P.

    2018-01-16

    Tropical reef systems are transitioning to a new era in which the interval between recurrent bouts of coral bleaching is too short for a full recovery of mature assemblages. We analyzed bleaching records at 100 globally distributed reef locations from 1980 to 2016. The median return time between pairs of severe bleaching events has diminished steadily since 1980 and is now only 6 years. As global warming has progressed, tropical sea surface temperatures are warmer now during current La Nina conditions than they were during El Nino events three decades ago. Consequently, as we transition to the Anthropocene, coral bleaching is occurring more frequently in all El Nino-Southern Oscillation phases, increasing the likelihood of annual bleaching in the coming decades.

  2. The role of bleaching in pulp mill effluent effects on fish

    Energy Technology Data Exchange (ETDEWEB)

    Coakley, J.; Hodson, P.; Cross, T. [Queen`s Univ., School of Environmental Studies, Queen`s Univ., Kingston, ON (Canada); Van Heiningen, A. [New Brunswick Univ., Limerick Pulp and Paper Centre, Fredericton, NB (Canada)

    1999-05-01

    Sources and potency of mixed function oxygenase (MFO)-inducing compounds within a 5-stage chlorine dioxide bleaching sequence at a pulp and paper mill was determined. Environmental concerns regarding chlorinated organic materials and their toxicity to aquatic organisms caused many mills to switch to elemental chlorine-free bleaching processes, with the most common being the chlorine dioxide bleaching process. However, even with this switch, effluent from kraft pulp mills still affect aquatic organisms. In this study, bleach plant filtrates were collected from two kraft mills in Ontario. The filtrates were used in fish bioassays to assess MFO-inducing potency. Results showed that potency varied depending on the wood used (softwood or hardwood) and the bleaching stage. Filtrates produced in a lab were weak MFO inducers compared to mill filtrates.14 refs., 6 figs.

  3. Climate change disables coral bleaching protection on the Great Barrier Reef.

    Science.gov (United States)

    Ainsworth, Tracy D; Heron, Scott F; Ortiz, Juan Carlos; Mumby, Peter J; Grech, Alana; Ogawa, Daisie; Eakin, C Mark; Leggat, William

    2016-04-15

    Coral bleaching events threaten the sustainability of the Great Barrier Reef (GBR). Here we show that bleaching events of the past three decades have been mitigated by induced thermal tolerance of reef-building corals, and this protective mechanism is likely to be lost under near-future climate change scenarios. We show that 75% of past thermal stress events have been characterized by a temperature trajectory that subjects corals to a protective, sub-bleaching stress, before reaching temperatures that cause bleaching. Such conditions confer thermal tolerance, decreasing coral cell mortality and symbiont loss during bleaching by over 50%. We find that near-future increases in local temperature of as little as 0.5°C result in this protective mechanism being lost, which may increase the rate of degradation of the GBR. Copyright © 2016, American Association for the Advancement of Science.

  4. Seasonal Dynamical Prediction of Coral Bleaching in the Great Barrier Reef, Australia

    Science.gov (United States)

    Spillman, C. M.; Alves, O.

    2009-05-01

    Sea surface temperature (SST) is now recognised as the primary cause of mass coral bleaching events. Coral bleaching occurs during times of stress, particularly when SSTs exceed the coral colony's tolerance level. Global warming is potentially a serious threat to the future of the world's reef systems with predictions by the international community that bleaching will increase in both frequency and severity. Advance warning of anomalous sea surface temperatures, and thus potential bleaching events, would allow for the implementation of management strategies to minimise reef damage. Seasonal SST forecasts from the coupled ocean-atmosphere model POAMA (Bureau of Meteorology) have skill in the Great Barrier Reef (Australia) several months into the future. We will present model forecasts and probabilistic products for use in reef management, and assess model skill in the region. These products will revolutionise the way in which coral bleaching events are monitored and assessed in the Great Barrier Reef and Australian region.

  5. The combination of sodium perborate and water as intracoronal teeth bleaching agent

    Directory of Open Access Journals (Sweden)

    Ananta Tantri Budi

    2008-12-01

    Full Text Available Background: The color change on post-endodontic treated teeth can be overcome by intracoronal tooth bleaching using walking bleach. Some agents used in walking bleach are combination of sodium peroxide and hydrogen peroxide, and combination of sodium perborate and water. Purpose: The objective of this review is to provide information and consideration of using safe and effective bleaching agents in the field of dentistry. Reviews: On one side, the use of sodium perborate and water combination does not cause the reduction of dentin hardness, enamel decay, and root resorbtion. On the other side, the use of sodium perborate and 30% hydrogen peroxide combination indicates that it takes longer time in yielding the proper color of teeth. Conclusion: The use of sodium perborate and water combination as bleaching agents is effective and safe.

  6. FY 1998 report on the results of R and D projects by local consortiums for immediate effects. Effective industrial utilization of livestock and fish waste containing keratin and collagen using bio-recycling technology; 1998 nendo Bio recycling gijutsu ni yoru shigen junkangata sangyo no sozo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The R and D project has been implemented for the bio-recycling technology, in order to produce the extracts and enzymatically hydrolyzed products from unutilized protein-containing resources, e.g., pig skin and fish scale. This paper summarizes the FY 1998 results. This project uses fish scale and pig skin containing collagen protein, and feather meal containing keratin protein, as the major feedstocks. High-molecular-weight collagen is extracted from the pig skin, and applied to production of cosmetics. It is concluded that the extract is safe to the human skin, and can be commercialized as a stock for cosmetics. A low-molecular-weight oligopeptide is produced from fish scale by enzymatic hydrolysis. It is concluded that the oligopeptide can be commercialized as a stock for health foods, because of its anti-radical activity and function of decreasing blood pressure. The R and D efforts are also directed to development of calcium apatite, recovered from the de-ashed liquid, as the Ca source for health foods, and development of peptide, recovered from feather meal by enzymatic hydrolysis, as a stock for foaming agent. (NEDO)

  7. Bio-inspired vision

    International Nuclear Information System (INIS)

    Posch, C

    2012-01-01

    Nature still outperforms the most powerful computers in routine functions involving perception, sensing and actuation like vision, audition, and motion control, and is, most strikingly, orders of magnitude more energy-efficient than its artificial competitors. The reasons for the superior performance of biological systems are subject to diverse investigations, but it is clear that the form of hardware and the style of computation in nervous systems are fundamentally different from what is used in artificial synchronous information processing systems. Very generally speaking, biological neural systems rely on a large number of relatively simple, slow and unreliable processing elements and obtain performance and robustness from a massively parallel principle of operation and a high level of redundancy where the failure of single elements usually does not induce any observable system performance degradation. In the late 1980's, Carver Mead demonstrated that silicon VLSI technology can be employed in implementing ''neuromorphic'' circuits that mimic neural functions and fabricating building blocks that work like their biological role models. Neuromorphic systems, as the biological systems they model, are adaptive, fault-tolerant and scalable, and process information using energy-efficient, asynchronous, event-driven methods. In this paper, some basics of neuromorphic electronic engineering and its impact on recent developments in optical sensing and artificial vision are presented. It is demonstrated that bio-inspired vision systems have the potential to outperform conventional, frame-based vision acquisition and processing systems in many application fields and to establish new benchmarks in terms of redundancy suppression/data compression, dynamic range, temporal resolution and power efficiency to realize advanced functionality like 3D vision, object tracking, motor control, visual feedback loops, etc. in real-time. It is argued that future artificial vision systems

  8. Effects of hydrogen peroxide bleaching strip gels on dental restorative materials in vitro: surface microhardness and surface morphology.

    Science.gov (United States)

    Duschner, Heinz; Götz, Hermann; White, Donald J; Kozak, Kathleen M; Zoladz, James R

    2004-01-01

    This study examined the effects of peroxide tooth bleaching, including Crest Whitestrips hydrogen peroxide gel treatments, on the surface hardness and morphology of common dental restorative treatments. American Dental Association (ADA) recommended dental restorative materials, including amalgam, dental gold, porcelain, glass ionomer, and composites, were prepared according to manufacturers' instructions. A cycling treatment methodology was employed which alternated ex vivo human salivary exposures with bleaching treatments under conditions of controlled temperature and durations of treatment. Bleaching treatments included commercial Crest Whitestrips bleaching gels, which utilize hydrogen peroxide as the in situ bleaching source, and several commercial carbamide peroxide bleaching gels. Control treatments included placebo gels and an untreated group. Crest Whitestrips bleaching included treatment exposures simulating recommended clinical exposures (14 hours), along with excess bleaching simulating exposure to five times suggested Crest Whitestrips use. At the conclusion of treatments, surface microhardness measures and surface morphological assessments with standard and variable pressure (VP-) SEMs were conducted to assess the effects of bleaching exposure on the surface morphology and structural integrity of the restoratives. Surface microhardness and SEM measures revealed no significant deleterious effects on the restoration surfaces from Whitestrips gels. These results confirm that tooth bleaching from the selected commercial hydrogen peroxide or carbamide peroxide bleaching systems does not produce changes in surface morphology or microhardness of common dental restorative materials. These results support the clinical safety of the selected commercial bleaching systems to the oral environment, matching results obtained from long-term use of these ingredients applied in dental offices and available in commercial formulations.

  9. Influence of Bleaching on Flavor of 34% Whey Protein Concentrate and Residual Benzoic Acid Concentration in Dried Whey Proteins

    Science.gov (United States)

    Previous studies have shown that bleaching negatively affects the flavor of 70% whey protein concentrate (WPC70), but bleaching effects on lower-protein products have not been established. Benzoyl peroxide (BP), a whey bleaching agent, degrades to benzoic acid (BA) and may elevate BA concentrations...

  10. Influence of bleaching on flavor of 34% whey protein concentrate and residual benzoic acid concentration in dried whey products

    Science.gov (United States)

    Previous studies have shown that bleaching negatively affects the flavor of 70% whey protein concentrate (WPC70), but bleaching effects on lower-protein products have not been established. Benzoyl peroxide (BP), a whey bleaching agent, degrades to benzoic acid (BA) and may elevate BA concentrations...

  11. Science and Technology of Bio-Inert Thin Films as Hermetic-Encapsulating Coatings for Implantable Biomedical Devices: Application to Implantable Microchip in the Eye for the Artificial Retina

    Science.gov (United States)

    Auciello, Orlando; Shi, Bing

    Extensive research has been devoted to the development of neuron prostheses and hybrid bionic systems to establish links between the nervous system and electronic or robotic prostheses with the main focus of restoring motor and sensory functions in blind patients. Artificial retinas, one type of neural prostheses we are currently working on, aim to restore some vision in blind patients caused by retinitis picmentosa or macular degeneration, and in the future to restore vision at the level of face recognition, if not more. Currently there is no hermetic microchip-size coating that provides a reliable, long-term (years) performance as encapsulating coating for the artificial retina Si microchip to be implanted inside the eye. This chapter focuses on the critical topics relevant to the development of a robust, long-term artificial retina device, namely the science and technology of hermetic bio-inert encapsulating coatings to protect a Si microchip implanted in the human eye from being attacked by chemicals existing in the eye's saline environment. The work discussed in this chapter is related to the development of a novel ultrananocrystalline diamond (UNCD) hermetic coating, which exhibited no degradation in rabbit eyes. The material synthesis, characterization, and electrochemical properties of these hermetic coatings are reviewed for application as encapsulating coating for the artificial retinal microchips implantable inside the human eye. Our work has shown that UNCD coatings may provide a reliable hermetic bio-inert coating technology for encapsulation of Si microchips implantable in the eye specifically and in the human body in general. Electrochemical tests of the UNCD films grown under CH4/Ar/H2 (1%) plasma exhibit the lowest leakage currents (˜7 × 10-7 A/cm2) in a saline solution simulating the eye environment. This leakage is incompatible with the functionality of the first-generation artificial retinal microchip. However, the growth of UNCD on top of the

  12. Bleaching of leaf litter and associated microfungi in subboreal and subalpine forests.

    Science.gov (United States)

    Hagiwara, Yusuke; Matsuoka, Shunsuke; Hobara, Satoru; Mori, Akira S; Hirose, Dai; Osono, Takashi

    2015-10-01

    Fungal decomposition of lignin leads to the whitening, or bleaching, of leaf litter, especially in temperate and tropical forests, but less is known about such bleaching in forests of cooler regions, such as boreal and subalpine forests. The purposes of the present study were to examine the extent of bleached area on the surface of leaf litter and its variation with environmental conditions in subboreal and subalpine forests in Japan and to examine the microfungi associated with the bleaching of leaf litter by isolating fungi from the bleached portions of the litter. Bleached area accounted for 21.7%-32.7% and 2.0%-10.0% of total leaf area of Quercus crispula and Betula ermanii, respectively, in subboreal forests, and for 6.3% and 18.6% of total leaf area of B. ermanii and Picea jezoensis var. hondoensis, respectively, in a subalpine forest. In subboreal forests, elevation, C/N ratio and pH of the FH layer, and slope aspect were selected as predictor variables for the bleached leaf area. Leaf mass per area and lignin content were consistently lower in the bleached area than in the nonbleached area of the same leaves, indicating that the selective decomposition of acid unhydrolyzable residue (recalcitrant compounds such as lignin, tannins, and cutins) enhanced the mass loss of leaf tissues in the bleached portions. Isolates of a total of 11 fungal species (6 species of Ascomycota and 5 of Basidiomycota) exhibited leaf-litter-bleaching activity under pure culture conditions. Two fungal species (Coccomyces sp. and Mycena sp.) occurred in both subboreal and subalpine forests, which were separated from each other by approximately 1100 km.

  13. Fracture resistance of endodontically-treated teeth: effect of combination bleaching and an antioxidant.

    Science.gov (United States)

    Khoroushi, Maryam; Feiz, Atieh; Khodamoradi, Roghayeh

    2010-01-01

    This in vitro study assessed the fracture resistance of endodontically-treated teeth undergoing combination bleaching with 38% and 9.5% hydrogen peroxide gels as in-office and at-home bleaching techniques, respectively. In addition, the effect of an antioxidizing agent, sodium ascorbate, was investigated. Sixty maxillary premolars were endodontically-treated, received a glass ionomer barrier as a mechanical seal and were embedded in acrylic resin up to the cemento-enamel junction. The specimens were divided into four groups (n = 15) as follows: G I: no bleaching, access cavity restored with resin composite (negative control); G II: bleached for three weeks daily using 9.5% hydrogen peroxide for two hours and three sessions of in-office bleaching using 38% hydrogen peroxide every seven days, then restored (positive control); G III: bleached similar to G II and restored after one week; G IV: bleached similar to G II, along with the use of an antioxidizing agent for 24 hours, then restored. In each in-office and at-home bleaching session, the whitening gels were applied to the buccal surface of the tooth and placed inside the pulp chamber (inside/outside bleaching technique). Finally, the specimens underwent fracture resistance testing; the data were analyzed using ANOVA and Scheffé's test (alpha = 0.05). Significant differences were observed among the study groups (p 0.05). Within the limitations of the current study, it can be concluded that the fracture resistance of endodontically-treated teeth decreases after combination bleaching. The use of sodium ascorbate can reverse decreased fracture resistance.

  14. DARPA Antibody Technology Program Standardized Test Bed for Antibody Characterization: Characterization of an MS2 Human IgG Antibody Produced by AnaptysBio, Inc.

    Science.gov (United States)

    2016-02-01

    instrument, and the lid was closed, which lowered the sample needles into the wells. The instrument was operated using the Experion software, and...Technologies; Sunnyvale, CA), and then blocked with 1X milk diluent block (MDB) (KPL, Inc.) for 30 min at 37 °C. The plates were then washed again using...Biosurveillance ka association rate constant kd dissociation rate constant KD overall affinity constant MDB milk diluent block MS2CP MS2 coat protein NRL

  15. Fluidized Bed Gasification as a Mature And Reliable Technology for the Production of Bio-Syngas and Applied in the Production of Liquid Transportation Fuels—A Review

    Directory of Open Access Journals (Sweden)

    Adrian H.M. Verkooijen

    2011-03-01

    Full Text Available Biomass is one of the renewable and potentially sustainable energy sources and has many possible applications varying from heat generation to the production of advanced secondary energy carriers. The latter option would allow mobile services like the transportation sector to reduce its dependency on the fossil fuel supply. This article reviews the state-of-the-art of the fluidization technology applied for the gasification of biomass aimed at the production of gas for subsequent synthesis of the liquid energy carriers via, e.g., the Fischer-Tropsch process. It discusses the advantages of the gasification technology over combustion, considers the size of the conversion plant in view of the local biomass availability, assesses the pros and cons of different gasifier types in view of the application of the product gas. Subsequently the article focuses on the fluidized bed technology to discuss the main process parameters and their influence on the product composition and the operability of the gasifier. Finally a synthesis process (FT is introduced shortly to illustrate the necessary gas cleaning steps in view of the purity requirements for the FT feed gas.

  16. Pakistan's Approach Towards Cem-Bio Issues

    International Nuclear Information System (INIS)

    Khan, M. A.; Iqbal, J.

    2007-01-01

    Pakistan ratified the BWC and CWC as a non-possessive state at that time when international environment were fraught with uncertainties about Chem-Bio threat. The geographical location of Pakistan faces a serious multidimensional WMD threat which includes threat from, non-state actors and her neighbours especially after declaration of chemical weapons during process of ratification of CWC. Pakistan never pursued such chem-bio program with the aim to use it as a mean of deterrence in overall context of security policy and always encouraged any move regarding strengthening of national/international institutional efforts to counter potential misuse of chem-bio technology. Pakistan's position has consistently been positive, pragmatic and supportive. For better implementation of BWC and CWC in Pakistan, comprehensive policies have been formulated and National Authority has been established to work as National point of contact on CWC affairs. Pakistan CWC Act 2000, Pakistan Bio Safety Rules 2005 and Pakistan Export Control Act 2004 are the evidences of Pakistan's sincerity to the implementation of CWC and BWC. Pakistan has declared 15 industries involved with chemicals, out of which 06 have already been inspected by OPCW Inspectors. Pakistan has declared its national protective program and pursuing all possible measures to enhance the national capacity and potential to guard against chem-bio threats. Pakistan has proved that it is committed to the principles of disarmament, which could serve as confidence building measures and may help reducing distrust and regional tension.(author)

  17. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  18. Different light-activated in-office bleaching systems: a clinical evaluation.

    Science.gov (United States)

    Gurgan, Sevil; Cakir, Filiz Yalcin; Yazici, Esra

    2010-11-01

    The aim of this clinical study was to evaluate the efficiency of in-office bleaching systems with different light sources for color change and possible side effects such as tooth sensitivity and gingival irritations. Forty healthy volunteers aged 18 years and older (average age 27.3 years), having all their natural healthy teeth in shade A3 or darker on the Vita shade guide, with no restorations on the buccal surfaces and no tooth sensitivity, participated in this study. Participants were randomly assigned to four groups of ten volunteers. Group 1 received bleaching without light activation (Opalescence Xtra Boost, Ultradent); group 2 received bleaching (Laser White 10, Biolase) with a diode laser (810 nm, 10 W/ Laser Smile, Biolase) activation; group 3 received bleaching treatment (Remewhite, Remedent) with a plasma arc lamp (400-490 nm, 2800 mV/cm(2), Remecure CL15), and group 4 received bleaching with a light emitting diode (LED) lamp (By White accelerator, Ensodent) according to the manufacturers' recommendations. The shade was assessed with a classical Vita shade guide (Vita Zahnfabrik) and a digital spectrophotometer (Vita Easy Shade, Vident). The color of teeth was scored at baseline and 1 week after bleaching. Any side effects on teeth or gingiva was recorded by visual analog scale. Results were analyzed statistically, by one-way analysis of variance (ANOVA), Kruskal-Wallis, and Mann-Whitney U tests with Bonferroni correction. All the bleaching techniques resulted in shade change. No significant differences were found in the color change among the four groups with shade guide assessment (P > 0.05), but spectrophotometer readings exhibited significant differences among the groups (P < 0.05). The overall shade change values expressed as DeltaL, Deltaa, Deltab, DeltaE for group 2 was significantly higher than those for the other groups (P < 0.05). Group 2 also showed lower tooth and gingival sensitivity scores than those of the other groups (P < 0.05). All

  19. Incorporating stakeholder preferences in the selection of technologies for using invasive alien plants as a bio-energy feedstock: applying the analytical hierarchy process

    CSIR Research Space (South Africa)

    De Lange, Willem J

    2012-05-01

    Full Text Available , 94 Hobbs, 2004, Buch and Dixon, 2008). Financial benefits from the utilisation of IAP biomass 95 removed through the Programme has been limited to use of the wood for fire-wood, crafts 96 and furniture; but most of the biomass is left in situ... in forest planning: a review. Forest 477 Policy and Economics, 1, 15-25. 478 CHAMBERS, R. (1997) Whose reality counts? Putting the last first. London, UK., Intermediate Technology. 479 CHARNLEY, S. & ENGELBERT, B. (2005) Evaluating public participation...

  20. Existing and emerging detection technologies for DNA (Deoxyribonucleic Acid) finger printing, sequencing, bio- and analytical chips: a multidisciplinary development unifying molecular biology, chemical and electronics engineering.

    Science.gov (United States)

    Kumar Khanna, Vinod

    2007-01-01

    The current status and research trends of detection techniques for DNA-based analysis such as DNA finger printing, sequencing, biochips and allied fields are examined. An overview of main detectors is presented vis-à-vis these DNA operations. The biochip method is explained, the role of micro- and nanoelectronic technologies in biochip realization is highlighted, various optical and electrical detection principles employed in biochips are indicated, and the operational mechanisms of these detection devices are described. Although a diversity of biochips for diagnostic and therapeutic applications has been demonstrated in research laboratories worldwide, only some of these chips have entered the clinical market, and more chips are awaiting commercialization. The necessity of tagging is eliminated in refractive-index change based devices, but the basic flaw of indirect nature of most detection methodologies can only be overcome by generic and/or reagentless DNA sensors such as the conductance-based approach and the DNA-single electron transistor (DNA-SET) structure. Devices of the electrical detection-based category are expected to pave the pathway for the next-generation DNA chips. The review provides a comprehensive coverage of the detection technologies for DNA finger printing, sequencing and related techniques, encompassing a variety of methods from the primitive art to the state-of-the-art scenario as well as promising methods for the future.

  1. Bio-functionalization of conductive textile materials with redox enzymes

    Science.gov (United States)

    Kahoush, M.; Behary, N.; Cayla, A.; Nierstrasz, V.

    2017-10-01

    In recent years, immobilization of oxidoreductase enzymes on electrically conductive materials has played an important role in the development of sustainable bio-technologies. Immobilization process allows the re-use of these bio-catalysts in their final applications. In this study, different methods of immobilizing redox enzymes on conductive textile materials were used to produce bio-functionalized electrodes. These electrodes can be used for bio-processes and bio-sensing in eco-designed applications in domains such as medicine and pollution control. However, the main challenge facing the stability and durability of these electrodes is the maintenance of the enzymatic activity after the immobilization. Hence, preventing the enzyme’s denaturation and leaching is a critical factor for the success of the immobilization processes.

  2. Status and potential of bio-methane fuel

    International Nuclear Information System (INIS)

    2008-01-01

    This document first indicates and describes the various bio-methane production processes which can be implemented on a short term (use of organic wastes or effluents), on a medium term (from energetic crops) and on a longer term (gasification). It discusses and assesses the potential production of bio-methane fuel from different sources and processes. It describes the steps of the production of bio-methane fuel from biogas, with notably biogas refinement to produce bio-methane through three processes (de-carbonation, desulfurization, dehydration). Cost productions are assessed. Expected technology advances are evoked. Finally, the authors outline the contribution of bio-methane in the limitation of greenhouse gas emissions in the transport sector

  3. In-Vitro Comparative Study of In-office and Home Bleaching Agents on Surface Micro-morphology of Enamel

    International Nuclear Information System (INIS)

    Fatima, N.

    2016-01-01

    Objective: To evaluate the effect of home-use bleaching agent containing 16 percent Carbamide Peroxide (CP) and in-office bleaching agent with 38 percentage Hydrogen Peroxide (HP) on surface micro-morphology of enamel. Study Design: An experimental study. Place and Duration of Study: The discs were prepared at Material Engineering Department of NED University of Engineering and Technology, Karachi, and surface morphology was analyzed at Centralized Science Laboratory of Karachi University, Pakistan. Duration of study was one year from January to December 2012. Methodology: Forty five sound human third molar crowns, extracted for periodontal reason, were included in the study. Longitudinal sections were made using diamond disks (0.2 mm) under water lubrication to obtain enamel slabs measuring (3 mm x 3 mm). The slabs were embedded in polystyrene resin by using 2.0 cm diameter PVC molds, leaving the outer enamel surface uncovered by the resin. Ninety dental enamel slabs were prepared. The slabs were then randomly divided into 3 groups. Each group contained thirty specimens (n=30). Group 1 was kept in artificial saliva at 37 degree C in incubator (Memart, Germany) during whole experiment. Group 2 was treated with power whitening gel (White Smile 2011, Germany). Group 3 was treated with tooth whitening pen (White Smile 2011, Germany). The most central region or the region that was most representative of the entire surface area was used. The SEM (Jeol-Japan-JSM6380A, JAPAN) micrographs were examined to determine the type of surface presented. The enamel changes were classified as no or mild alteration, moderate alteration and severe altered surface. Results: Regarding micro-morphology, the enamel surface of control groups showed smooth surface in general with some scattered clear scratches due to the polishing procedure. The specimens bleached in group 2 and group 3, represented areas of mild erosion. Conclusion: Bleaching with 38 percentage Hydrogen Peroxide (HP) and

  4. Tooth bleaching using peroxide-containing agents: current status of safety issues.

    Science.gov (United States)

    Li, Y

    1998-08-01

    During the last 10 years, at-home tooth bleaching using peroxide-containing agents has quickly become well accepted. It is one of the most popular cosmetic dental procedures for whitening teeth. Although there are few disputes regarding their efficacy, concerns and debates have continued regarding the safety of peroxide-containing tooth bleaching agents. Potential carcinogenicity and genotoxicity of the peroxides used in bleaching agents are the two most persistent and controversial issues. This article reviews and discusses available information on carcinogenicity and genotoxicity of hydrogen peroxide and the potential risks associated with the use of peroxide-containing bleaching agents. Clinical studies reported after the 1996 international symposium on responses of oral tissues to peroxide-containing bleaching agents are also reviewed. Overall evidence supports the conclusion that the proper use of peroxide-containing at-home tooth bleaching agents is safe. However, potential adverse effects may occur in inappropriate applications, abuses, or the use of inappropriate products. At-home tooth bleaching should be monitored by dental professionals to maximize the benefits while minimizing potential risks.

  5. Effect of newer antioxidants on the bond strength of composite on bleached enamel

    Directory of Open Access Journals (Sweden)

    M Manoharan

    2016-01-01

    Full Text Available Aim: The study aims to evaluate the effect of the application of two antioxidants on the bond strength of composite resin to bleached enamel. Materials and Methods: Eighty enamel surfaces were obtained from forty human extracted premolars. Specimens were randomly divided into four groups (n = 20. Group 1: No bleaching (control; Group 2a: Bleaching with 15% carbamide peroxide gel; Group 2b: Bleaching, followed by application of 10% sodium ascorbate gel; Group 2c: Bleaching, followed by application of 5% proanthocyanidin agent. Surfaces were etched followed by application of total etch bonding system, and composite resin cylinders were bonded. Specimens were tested for shear bond strength. Statistical Analysis Used: One-way analysis of variance was used for multiple group comparison and post hoc Tukey′s test for individual group-wise comparison. Results: Significantly higher shear bond strength values were observed in Group 2c and 2b as compared with Group 1 and 2a (P < 0.05. Among the antioxidants, Group 2c showed significantly higher shear bond strength values than Group 2b (P < 0.05. Conclusion: It can be concluded that the use of antioxidant before bonding procedures on bleached enamel completely neutralizes the deleterious effects of bleaching and increases the bond strength significantly.

  6. Elevated temperatures and bleaching on a high latitude coral reef: the 1988 Bermuda event

    Science.gov (United States)

    Cook, Clayton B.; Logan, Alan; Ward, Jack; Luckhurst, Brian; Berg, Carl J.

    1990-03-01

    Sea temperatures were normal in Bermuda during 1987, when Bermuda escaped the episodes of coral bleaching which were prevalent throughout the Caribbean region. Survey transecs in 1988 on 4 6 m reefs located on the rim margin and on a lagoonal patch reef revealed bleaching only of zoanthids between May and July. Transect and tow surveys in August and September revealed bleaching of several coral species; Millepora alcicornis on rim reefs was the most extensively affected. The frequency of bleaching in this species, Montastrea annularis and perhaps Diploria labyrinthiformis was significantly higher on outer reefs than on inshore reefs. This bleaching period coincided with the longest period of elevated sea temperatures in Bermuda in 38 years (28.9 30.9°C inshore, >28° offshore). By December, when temperatures had returned to normal, bleaching of seleractinians continued, but bleaching of M. alcicornis on the outer reefs was greatly reduced. Our observations suggest that corals which normally experience wide temperature ranges are less sensitive to thermal stress, and that high-latitude reef corals are sensitive to elevated temperatures which are within the normal thermal range of corals at lower latitudes.

  7. Effect of three nanobiomaterials on the surface roughness of bleached enamel

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2015-01-01

    Full Text Available Background: The ever-increasing demand for enhanced esthetic appearance has resulted in significant developments in bleaching products. However, the enamel surface roughness (SR might be negatively affected by bleaching agents. This in vitro study was undertaken to compare the effects of three nanobiomaterials on the enamel SR subsequent to bleaching. Materials and Methods: The crowns of six extracted intact nonerupted human third molars were sectioned. Five dental blocks measuring 2 mm × 3 mm × 4 mm were prepared from each tooth and placed in colorless translucent acrylic resin. The enamel areas from all the specimens were divided into five groups (n = 6: Group 1 did not undergo any bleaching procedures; Group 2 was bleached with a 40% hydrogen peroxide (HP gel; Groups 3, 4, and 5 were bleached with a 40% HP gel modified by bioactive glass (BAG, amorphous calcium phosphate, and hydroxyapatite, respectively. The enamel SR was evaluated before and after treatment by atomic force microscopy. The data were analyzed by Kruskal–Wallis and Mann–Whitney tests. Results: SR increased significantly in the HP group. SR decreased significantly in the HP gel modified by BAG group as compared to other groups. Conclusions: Within the limitations of this study, incorporation of each one of the three test biomaterials proved effective in decreasing enamel SR subsequent to in-office bleaching technique.

  8. Recycling of water in bleached kraft pulp mills by using electrodialysis.

    Energy Technology Data Exchange (ETDEWEB)

    Fracaro, A. T.; Henry, M. P.; Pfromm, P.; Tsai, S.-P.

    1999-01-15

    Conservation of water in bleached kraft pulp mills by recycling the bleach plant effluent directly without treatment will cause accumulation of inorganic ''non-process elements'' (NPEs) and serious operational problems. In this work, an electrodialysis process is being developed for recycling the acidic bleach plant effluent of bleached kraft pulp mills. In this process, electrodialysis functions as a selective kidney to remove inorganic NPEs from bleach plant effluents, before they reach the recovery cycle. Acidic bleach plant effluents from several mills using bleaching sequences based on chlorine dioxide were characterized. The total dissolved solids were mostly inorganic NPEs. Sodium was the predominant cation and chloride was present at significant levels in all these effluents. In laboratory electrodialysis experiments, selective removal of chloride and potentially harmful cations, such as potassium, calcium, and magnesium, were removed efficiently. Rejection of organic compounds was up to 98%. Electrodialysis was shown to be resistant to membrane fouling and scaling, in a 100-hour laboratory experiment. Based on a model mill with 1,000 ton/day pulp production, the economic analysis suggests that the energy cost of electrodialysis is less than $200/day, and the capital cost of the stack is about $500,000.

  9. Influence of bleach activators on the fabric made from cotton (gossypium hamster l.)

    International Nuclear Information System (INIS)

    Asif, H.M.; Iftikhar, M.; Shahbaz, B.

    2013-01-01

    Raw cotton contains various type of trash and most of the impurities are removed during the spinning process but still the cotton fabric coming from the weaving or knitting process always contains some impurities. Some time cotton fabric gets the oil, stains and coloured materials which affect the quality of dyed fabric. Bleaching is a process that eliminates unwanted coloured matters from the fibres, yarn and fabrics. A bleaching agent is a material that lightens or whitens a substrate through chemical action. Hydrogen peroxide is by far the most commonly used oxidative bleaching agent for cotton and its blends, accounting for more than 90 percent of all the bleaching agents. The use of activators to enhance the bleaching performance of hydrogen peroxide for cellulosic materials has gained popularity now a day. In this context the main objectives of this paper are to study the influence of different bleaching activators on cotton fabric and to give implications for textile extension.The results indicate that the activators with different concentrations, along with different concentrations of hydrogen peroxide (H/sub 2/O/sub 2) have significant influence on the bleaching performance of cotton fabric. (author)

  10. Relationships between temperature, bleaching and white syndrome on the Great Barrier Reef

    Science.gov (United States)

    Ban, S. S.; Graham, N. A. J.; Connolly, S. R.

    2013-03-01

    Coral bleaching and disease have often been hypothesized to be mutually reinforcing or co-occurring, but much of the research supporting this has only drawn an implicit connection through common environmental predictors. In this study, we examine whether an explicit relationship between white syndrome and bleaching exists using assemblage-level monitoring data from up to 112 sites on reef slopes spread throughout the Great Barrier Reef over 11 years of monitoring. None of the temperature metrics commonly used to predict mass bleaching performed strongly when applied to these data. Furthermore, the inclusion of bleaching as a predictor did not improve model skill over baseline models for predicting white syndrome. Similarly, the inclusion of white syndrome as a predictor did not improve models of bleaching. Evidence for spatial co-occurrence of bleaching and white syndrome at the assemblage level in this data set was also very weak. These results suggest the hypothesized relationship between bleaching and disease events may be weaker than previously thought, and more likely to be driven by common responses to environmental stressors, rather than directly facilitating one another.

  11. The influence of hair bleach on the ultrastructure of human hair with special reference to hair damage.

    Science.gov (United States)

    Imai, Takehito

    2011-05-01

    The influence of human hair bleaching agents with different bleaching strength on the ultrastructure of human hair was studied using a transmission electron microscope (TEM) and an energy dispersive X-ray spectrometer equipped with TEM (EDS-TEM). Two kinds of bleaching agents were used: a lightener agent with a weak bleaching effect and a powder-bleach with a stronger bleaching effect. From the comparison of the bleaching properties obtained by the electronic staining of black and white hair samples, it was suggested that the permeability of hair was increased by bleaching, and there was an increase of the stainability of hair subjected to electronic staining. The bleaching action provoked the decomposition of melanin granules and the flow out of granular contents into the intermacrofibrillar matrix. Some metal elements were detected in the melanin granular matrix by EDS-TEM. As a result, the diffusion of metal elements into the intermacrofibrillar matrix promoted further damage to the hair by catalytic action with the hydrogen peroxide in the bleaching agents outside the melanin granules. Further study will lead us to the edge of the development of a new bleaching agent, which reacts only with melanin granules and causes the minimum of damage to outside the melanin granules.

  12. Skeletal isotope records of growth perturbations in Porites corals during the 1997-1998 mass bleaching event

    Science.gov (United States)

    Suzuki, A.; Gagan, M.; Fabricius, K.; Isdale, P.; Yukino, I.; Kawahata, H.

    2003-04-01

    Severe coral bleaching occurred throughout the tropics in 1997/98. We report skeletal UV fluorescence, oxygen isotope, and carbon isotope evidence for perturbations in coral skeletal growth due to bleaching at Ishigaki Island, Japan, and Pandora Reef, Great Barrier Reef. Bleached corals showed abrupt reductions in skeletal extension rate immediately after summer temperature maxima, indicating that bleaching inhibits coral calcification. A colony growing at the low tide line in Ishigaki exhibited clear blue UV fluorescent bands associated with recurrent growth interruptions. Based on the length of time-gaps observed in the annual isotopic cycle, the typical time required for a coral to recover from bleaching is estimated to be about 5--6 months. The effect of bleaching on the oxygen isotope ratio -- temperature relationship was negligible. However, the Ishigaki corals showed lower carbon isotope ratios during bleaching indicating depressed coral metabolism associated with a reduction in calcification. In contrast, skeletal carbon isotope ratios in the Pandora Reef corals exhibited little change in response to bleaching. This is because the records for Pandora Reef were derived from the shaded sides of coral colonies, where algal photosynthesis was particularly slow prior to bleaching, thus subduing the carbon isotope response to bleaching. Taken together, the isotopic and UV fluorescence signals can be used to reconstruct past bleaching events.

  13. BioFET-SIM

    DEFF Research Database (Denmark)

    Hediger, M. R.; Martinez, K. L.; Nygård, J.

    2013-01-01

    Biosensors based on nanowire field effect transistor (FET) have received much attention in recent years as a way to achieve ultra-sensitive and label-free sensing of molecules of biological interest. The BioFET-SIM computer model permits the analysis and interpretation of experimental sensor...... signals through its web-based interface www.biofetsim.org. The model also allows for predictions of the effects of changes in the experimental setup on the sensor signal. After an introduction to nanowire-based FET biosensors, this chapter reviews the theoretical basis of BioFET-SIM models describing both...... single and multiple charges on the analyte. Afterwards the usage of the interface and its relative command line version is briefly shown. Finally, possible applications of the BioFET-SIM model are presented. Among the possible uses of the interface, the effects on the predicted signal of pH, buffer ionic...

  14. Caribbean corals in crisis: record thermal stress, bleaching, and mortality in 2005.

    Science.gov (United States)

    Eakin, C Mark; Morgan, Jessica A; Heron, Scott F; Smith, Tyler B; Liu, Gang; Alvarez-Filip, Lorenzo; Baca, Bart; Bartels, Erich; Bastidas, Carolina; Bouchon, Claude; Brandt, Marilyn; Bruckner, Andrew W; Bunkley-Williams, Lucy; Cameron, Andrew; Causey, Billy D; Chiappone, Mark; Christensen, Tyler R L; Crabbe, M James C; Day, Owen; de la Guardia, Elena; Díaz-Pulido, Guillermo; DiResta, Daniel; Gil-Agudelo, Diego L; Gilliam, David S; Ginsburg, Robert N; Gore, Shannon; Guzmán, Héctor M; Hendee, James C; Hernández-Delgado, Edwin A; Husain, Ellen; Jeffrey, Christopher F G; Jones, Ross J; Jordán-Dahlgren, Eric; Kaufman, Les S; Kline, David I; Kramer, Philip A; Lang, Judith C; Lirman, Diego; Mallela, Jennie; Manfrino, Carrie; Maréchal, Jean-Philippe; Marks, Ken; Mihaly, Jennifer; Miller, W Jeff; Mueller, Erich M; Muller, Erinn M; Orozco Toro, Carlos A; Oxenford, Hazel A; Ponce-Taylor, Daniel; Quinn, Norman; Ritchie, Kim B; Rodríguez, Sebastián; Ramírez, Alberto Rodríguez; Romano, Sandra; Samhouri, Jameal F; Sánchez, Juan A; Schmahl, George P; Shank, Burton V; Skirving, William J; Steiner, Sascha C C; Villamizar, Estrella; Walsh, Sheila M; Walter, Cory; Weil, Ernesto; Williams, Ernest H; Roberson, Kimberly Woody; Yusuf, Yusri

    2010-11-15

    The rising temperature of the world's oceans has become a major threat to coral reefs globally as the severity and frequency of mass coral bleaching and mortality events increase. In 2005, high ocean temperatures in the tropical Atlantic and Caribbean resulted in the most severe bleaching event ever recorded in the basin. Satellite-based tools provided warnings for coral reef managers and scientists, guiding both the timing and location of researchers' field observations as anomalously warm conditions developed and spread across the greater Caribbean region from June to October 2005. Field surveys of bleaching and mortality exceeded prior efforts in detail and extent, and provided a new standard for documenting the effects of bleaching and for testing nowcast and forecast products. Collaborators from 22 countries undertook the most comprehensive documentation of basin-scale bleaching to date and found that over 80% of corals bleached and over 40% died at many sites. The most severe bleaching coincided with waters nearest a western Atlantic warm pool that was centered off the northern end of the Lesser Antilles. Thermal stress during the 2005 event exceeded any observed from the Caribbean in the prior 20 years, and regionally-averaged temperatures were the warmest in over 150 years. Comparison of satellite data against field surveys demonstrated a significant predictive relationship between accumulated heat stress (measured using NOAA Coral Reef Watch's Degree Heating Weeks) and bleaching intensity. This severe, widespread bleaching and mortality will undoubtedly have long-term consequences for reef ecosystems and suggests a troubled future for tropical marine ecosystems under a warming climate.

  15. Seasonal mesophotic coral bleaching of Stylophora pistillata in the Northern Red Sea.

    Directory of Open Access Journals (Sweden)

    Orit Nir

    Full Text Available Coral bleaching occurs when environmental stress induces breakdown of the coral-algae symbiosis and the host initiates algae expulsion. Two types of coral bleaching had been thoroughly discussed in the scientific literature; the first is primarily associated with mass coral bleaching events; the second is a seasonal loss of algae and/or pigments. Here, we describe a phenomenon that has been witnessed for repeated summers in the mesophotic zone (40-63 m in the northern Red Sea: seasonal bleaching and recovery of several hermatypic coral species. In this study, we followed the recurring bleaching process of the common coral Stylophora pistillata. Bleaching occurred from April to September with a 66% decline in chlorophyll a concentration, while recovery began in October. Using aquarium and transplantation experiments, we explored environmental factors such as temperature, photon flux density and heterotrophic food availability. Our experiments and observations did not yield one single factor, alone, responsible for the seasonal bleaching. The dinoflagellate symbionts (of the genus Symbiodinium in shallow (5 m Stylophora pistillata were found to have a net photosynthetic rate of 56.98-92.19 µmol O2 cm(-2 day(-1. However, those from mesophotic depth (60 m during months when they are not bleached are net consumers of oxygen having a net photosynthetic rate between -12.86 - (-10.24 µmol O2 cm(-2 day(-1. But during months when these mesophotic corals are partially-bleached, they yielded higher net production, between -2.83-0.76 µmol O2 cm(-2 day(-1. This study opens research questions as to why mesophotic zooxanthellae are more successfully meeting the corals metabolic requirements when Chl a concentration decreases by over 60% during summer and early fall.

  16. Caribbean corals in crisis: record thermal stress, bleaching, and mortality in 2005.

    Directory of Open Access Journals (Sweden)

    C Mark Eakin

    Full Text Available BACKGROUND: The rising temperature of the world's oceans has become a major threat to coral reefs globally as the severity and frequency of mass coral bleaching and mortality events increase. In 2005, high ocean temperatures in the tropical Atlantic and Caribbean resulted in the most severe bleaching event ever recorded in the basin. METHODOLOGY/PRINCIPAL FINDINGS: Satellite-based tools provided warnings for coral reef managers and scientists, guiding both the timing and location of researchers' field observations as anomalously warm conditions developed and spread across the greater Caribbean region from June to October 2005. Field surveys of bleaching and mortality exceeded prior efforts in detail and extent, and provided a new standard for documenting the effects of bleaching and for testing nowcast and forecast products. Collaborators from 22 countries undertook the most comprehensive documentation of basin-scale bleaching to date and found that over 80% of corals bleached and over 40% died at many sites. The most severe bleaching coincided with waters nearest a western Atlantic warm pool that was centered off the northern end of the Lesser Antilles. CONCLUSIONS/SIGNIFICANCE: Thermal stress during the 2005 event exceeded any observed from the Caribbean in the prior 20 years, and regionally-averaged temperatures were the warmest in over 150 years. Comparison of satellite data against field surveys demonstrated a significant predictive relationship between accumulated heat stress (measured using NOAA Coral Reef Watch's Degree Heating Weeks and bleaching intensity. This severe, widespread bleaching and mortality will undoubtedly have long-term consequences for reef ecosystems and suggests a troubled future for tropical marine ecosystems under a warming climate.

  17. Caribbean Corals in Crisis: Record Thermal Stress, Bleaching, and Mortality in 2005

    Science.gov (United States)

    Eakin, C. Mark; Morgan, Jessica A.; Heron, Scott F.; Smith, Tyler B.; Liu, Gang; Alvarez-Filip, Lorenzo; Baca, Bart; Bartels, Erich; Bastidas, Carolina; Bouchon, Claude; Brandt, Marilyn; Bruckner, Andrew W.; Bunkley-Williams, Lucy; Cameron, Andrew; Causey, Billy D.; Chiappone, Mark; Christensen, Tyler R. L.; Crabbe, M. James C; Day, Owen; de la Guardia, Elena; Díaz-Pulido, Guillermo; DiResta, Daniel; Gil-Agudelo, Diego L.; Gilliam, David S.; Ginsburg, Robert N.; Gore, Shannon; Guzmán, Héctor M.; Hendee, James C.; Hernández-Delgado, Edwin A.; Husain, Ellen; Jeffrey, Christopher F. G.; Jones, Ross J.; Jordán-Dahlgren, Eric; Kaufman, Les S.; Kline, David I.; Kramer, Philip A.; Lang, Judith C.; Lirman, Diego; Mallela, Jennie; Manfrino, Carrie; Maréchal, Jean-Philippe; Marks, Ken; Mihaly, Jennifer; Miller, W. Jeff; Mueller, Erich M.; Muller, Erinn M.; Orozco Toro, Carlos A.; Oxenford, Hazel A.; Ponce-Taylor, Daniel; Quinn, Norman; Ritchie, Kim B.; Rodríguez, Sebastián; Ramírez, Alberto Rodríguez; Romano, Sandra; Samhouri, Jameal F.; Sánchez, Juan A.; Schmahl, George P.; Shank, Burton V.; Skirving, William J.; Steiner, Sascha C. C.; Villamizar, Estrella; Walsh, Sheila M.; Walter, Cory; Weil, Ernesto; Williams, Ernest H.; Roberson, Kimberly Woody; Yusuf, Yusri

    2010-01-01

    Background The rising temperature of the world's oceans has become a major threat to coral reefs globally as the severity and frequency of mass coral bleaching and mortality events increase. In 2005, high ocean temperatures in the tropical Atlantic and Caribbean resulted in the most severe bleaching event ever recorded in the basin. Methodology/Principal Findings Satellite-based tools provided warnings for coral reef managers and scientists, guiding both the timing and location of researchers' field observations as anomalously warm conditions developed and spread across the greater Caribbean region from June to October 2005. Field surveys of bleaching and mortality exceeded prior efforts in detail and extent, and provided a new standard for documenting the effects of bleaching and for testing nowcast and forecast products. Collaborators from 22 countries undertook the most comprehensive documentation of basin-scale bleaching to date and found that over 80% of corals bleached and over 40% died at many sites. The most severe bleaching coincided with waters nearest a western Atlantic warm pool that was centered off the northern end of the Lesser Antilles. Conclusions/Significance Thermal stress during the 2005 event exceeded any observed from the Caribbean in the prior 20 years, and regionally-averaged temperatures were the warmest in over 150 years. Comparison of satellite data against field surveys demonstrated a significant predictive relationship between accumulated heat stress (measured using NOAA Coral Reef Watch's Degree Heating Weeks) and bleaching intensity. This severe, widespread bleaching and mortality will undoubtedly have long-term consequences for reef ecosystems and suggests a troubled future for tropical marine ecosystems under a warming climate. PMID:21125021

  18. Sensory and Functionality Differences of Whey Protein Isolate Bleached by Hydrogen or Benzoyl Peroxide.

    Science.gov (United States)

    Smith, Tucker J; Foegeding, E Allen; Drake, MaryAnne

    2015-10-01

    Whey protein is a highly functional food ingredient used in a wide variety of applications. A large portion of fluid whey produced in the United States is derived from Cheddar cheese manufacture and contains annatto (norbixin), and therefore must be bleached. The objective of this study was to compare sensory and functionality differences between whey protein isolate (WPI) bleached by benzoyl peroxide (BP) or hydrogen peroxide (HP). HP and BP bleached WPI and unbleached controls were manufactured in triplicate. Descriptive sensory analysis and gas chromatography-mass spectrometry were conducted to determine flavor differences between treatments. Functionality differences were evaluated by measurement of foam stability, protein solubility, SDS-PAGE, and effect of NaCl concentration on gelation relative to an unbleached control. HP bleached WPI had higher concentrations of lipid oxidation and sulfur containing volatile compounds than both BP and unbleached WPI (P protein loss at pH 4.6 of WPI decreased by bleaching with either hydrogen peroxide or benzoyl peroxide (P whey with either BP or HP resulted in protein degradation, which likely contributed to functionality differences. These results demonstrate that bleaching has flavor effects as well as effects on many of the functionality characteristics of whey proteins. Whey protein isolate (WPI) is often used for its functional properties, but the effect of oxidative bleaching chemicals on the functional properties of WPI is not known. This study identifies the effects of hydrogen peroxide and benzoyl peroxide on functional and flavor characteristics of WPI bleached by hydrogen and benzoyl peroxide and provides insights for the product applications which may benefit from bleaching. © 2015 Institute of Food Technologists®

  19. Effects of different concentrations of carbamide peroxide and bleaching periods on the roughness of dental ceramics

    Directory of Open Access Journals (Sweden)

    Sérgio Augusto Morey Ourique

    2011-10-01

    Full Text Available The wide use of dental bleaching treatment has brought concern about the possible effects of hydrogen peroxide on dental tissue and restorative materials. The objective of this study was to evaluate in vitro the effect of nightguard bleaching on the surface roughness of dental ceramics after different periods of bleaching treatment. Fifteen specimens of 5 × 3 × 1 mm were created with three dental ceramics following the manufacturers' instructions: IPS Classic (Ivoclar-Vivadent; IPS d.Sign (Ivoclar-Vivadent; and VMK-95 (Vita. A profilometer was used to evaluate baseline surface roughness (Ra values of all ceramics by five parallel measurements with five 0.25 mm cut off (Λc at 0.1 mm/s. Afterwards, all specimens were submitted to 6-h daily bleaching treatments with 10% or 16% carbamide peroxide (Whiteness- FGM for 21 days, while control groups from each ceramic system were stored in artificial saliva. The surface roughness of all groups was evaluated after 18 h, 42 h, 84 h, and 126 h of bleaching treatment. The surface roughness of each specimen (n = 5 was based on the mean value of five parallel measurements in each time and all data were submitted to two-way repeated measures ANOVA and Tukey's post-hoc test (α = 0.05. No significant differences in ceramic surface roughness were observed between untreated and bleached ceramic surfaces, regardless of bleaching intervals or bleaching treatments. This study provided evidence that at-home bleaching systems do not cause detrimental effects on surface roughness of dental ceramics.

  20. The Delineation of Coral Bleaching Thresholds and Future Reef Health, Little Cayman Cayman Islands

    Science.gov (United States)

    Manfrino, C.; Van Hooidonk, R. J.; Manzello, D.; Hendee, J.

    2011-12-01

    The global rise in sea temperature through anthropogenic climate change is affecting coral reef ecosystems through a phenomenon known as coral bleaching; a common reaction to thermally induced physiological stress in reef-building corals that often leads to coral mortality. We describe aspects of the most prevalent episode of coral bleaching ever recorded at Little Cayman, Cayman Islands, during the fall of 2009. Scleractinian coral species exhibiting susceptibility to thermal stress and bleaching in Little Cayman were, in order, Siderastrea siderea, Montastraea annularis, and Montastraea faveolata, while Diplora strigosa and Agaricia spp. were less so, yet still showed considerable bleaching prevalence and severity. In contrast, the least susceptible were Porites porites, Porites astreoides, and Montastraea cavernosa. These observations and other reported observations of coral bleaching, together with 29 years (1982 - 2010) of satellite-derived sea surface temperatures, were used in a Degree Heating Weeks (DHW) and Peirce Skill Score (PSS) analysis to calculate a bleaching threshold above which bleaching was expected to occur. A threshold of 4.2 DHW had the highest skill, with a PSS of 0.70. This threshold and susceptibility ranking are used in combination with SST data from global, coupled ocean-atmosphere general circulation models (GCM) from the fourth IPCC assessment to forecast future reef health on Little Cayman. While these GCMs possess skill in reproducing many aspects of climate, they vary in their ability to correctly capture such parameters as the tropical ocean seasonal cycle and El Niño Southern Oscillation (ENSO) variability. These model weaknesses likely reduce the skill of coral bleaching predictions. To overcome this, a multi-model ensemble of GCMs are corrected for their mean, annual cycle and ENSO variability prior to calculating future thermal stress. Preliminary results show that from 2045 on Little Cayman is likely to see more than two

  1. Seasonal mesophotic coral bleaching of Stylophora pistillata in the Northern Red Sea.

    Science.gov (United States)

    Nir, Orit; Gruber, David F; Shemesh, Eli; Glasser, Eliezra; Tchernov, Dan

    2014-01-01

    Coral bleaching occurs when environmental stress induces breakdown of the coral-algae symbiosis and the host initiates algae expulsion. Two types of coral bleaching had been thoroughly discussed in the scientific literature; the first is primarily associated with mass coral bleaching events; the second is a seasonal loss of algae and/or pigments. Here, we describe a phenomenon that has been witnessed for repeated summers in the mesophotic zone (40-63 m) in the northern Red Sea: seasonal bleaching and recovery of several hermatypic coral species. In this study, we followed the recurring bleaching process of the common coral Stylophora pistillata. Bleaching occurred from April to September with a 66% decline in chlorophyll a concentration, while recovery began in October. Using aquarium and transplantation experiments, we explored environmental factors such as temperature, photon flux density and heterotrophic food availability. Our experiments and observations did not yield one single factor, alone, responsible for the seasonal bleaching. The dinoflagellate symbionts (of the genus Symbiodinium) in shallow (5 m) Stylophora pistillata were found to have a net photosynthetic rate of 56.98-92.19 µmol O2 cm(-2) day(-1). However, those from mesophotic depth (60 m) during months when they are not bleached are net consumers of oxygen having a net photosynthetic rate between -12.86 - (-10.24) µmol O2 cm(-2) day(-1). But during months when these mesophotic corals are partially-bleached, they yielded higher net production, between -2.83-0.76 µmol O2 cm(-2) day(-1). This study opens research questions as to why mesophotic zooxanthellae are more successfully meeting the corals metabolic requirements when Chl a concentration decreases by over 60% during summer and early fall.

  2. A terracotta bio-battery.

    Science.gov (United States)

    Ajayi, Folusho F; Weigele, Peter R

    2012-07-01

    Terracotta pots were converted into simple, single chamber, air-cathode bio-batteries. This bio-battery design used a graphite-felt anode and a conductive graphite coating without added catalyst on the exterior as a cathode. Bacteria enriched from river sediment served as the anode catalyst. These batteries gave an average OCV of 0.56 V ± 0.02, a Coulombic efficiency of 21 ± 5%, and a peak power of 1.06 mW ± 0.01(33.13 mW/m(2)). Stable current was also produced when the batteries were operated with hay extract in salt solution. The bacterial community on the anode of the batteries was tested for air tolerance and desiccation resistance over a period ranging from 2 days to 2 weeks. The results showed that the anode community could survive complete drying of the electrolyte for several days. These data support the further development of this technology as a potential power source for LED-based lighting in off-grid, rural communities. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Bleach boosting effect of xylanase A from Bacillus halodurans C-125 in ECF bleaching of wheat straw pulp.

    Science.gov (United States)

    Lin, Xiao-qiong; Han, Shuang-yan; Zhang, Na; Hu, Hui; Zheng, Sui-ping; Ye, Yan-rui; Lin, Ying

    2013-02-05

    Past studies have revealed major difficulties in applications of xylanase in the pulp and paper industry as enzymes isolated from many different species could not tolerate high temperatures or highly alkaline conditions. The thermostable xylanase A from Bacillus halodurans C-125 (C-125 xylanase A) was successfully cloned and expressed in Pichia pastoris with a yield as high as 3361 U/mL in a 2 L reactor. Its thermophilic and basophilic properties (optimal activity at 70 °C and pH 9.0), together with the fact it is cellulase-free, render this enzyme attractive for compatible applications in the pulp and paper industry. The pretreatment of wheat straw pulp with C-125 xylanase A at pH 9.0 and 70 °C for 90 min induced the release of both chromophores (Ab(237), Ab(254), Ab(280)) and hydrophobic compounds (Ab(465)) into the filtrate as well as sugar degradation. Moreover, the addition of 10 U xylanase to 1 g wheat straw pulp (dry weight) as pretreatment improved brightness by 5.2% ISO and decreased the kappa number by 5.0% when followed by hydrogen peroxide bleaching. In addition, compared with two commercial enzymes, Pulpzyme HC and AU-PE89, which are normally incorporated in ECF bleaching of wheat straw pulp, C-125 xylanase A proved to be more effective in enhancing brightness as well as preserving paper strength properties. When evaluating the physical properties of pulp samples, such as tensile index, tearing index, bursting index, and post-color (PC) number, the enzymes involved in pretreating pulps exhibited better or the same performances as chemical treatment. Compared with chemical bleaching, chlorine consumption can be significantly reduced by 10% for xylanase-pretreated wheat straw pulp while maintaining the brightness together with the kappa number at the same level. Scanning electron microscopy revealed significant surface modification of enzyme-pretreated pulp fibers with no marked fiber disruptions. Copyright © 2012 Elsevier Inc. All rights reserved.

  4. National serum bio bank

    International Nuclear Information System (INIS)

    Poli, F.; Facchiano, F.

    2009-01-01

    The Italian Bio bank is hosted at 'Ospedale Maggiore. Policlinico' of Milan. This structure occupies an area of 300 sq meters and includes laboratories and a cryogenic area. This facility has been built a in compliance with the standards defined by the Foundation for Accreditation of Cellular Therapy (FACT) mostly related to adequacy of spaces, equipment and governmental and institutional policies for bio safety. The Cryogenic area follows written procedures in the event of an ambient disaster and for safety personnel and of the samples stored

  5. Biodiesel Production from Residual Palm Oil Contained in Spent Bleaching Earth by In Situ Trans-Esterification

    Directory of Open Access Journals (Sweden)

    A S Fahmil QRM

    2014-06-01

    Full Text Available Spent Bleaching Earth (SBE is an industrial solid waste of vegetable oil industry that has a high residual oil to be potentialy converted to biodiesel. This study aims at developing a biodiesel production process technology by utilizing residual palm oil contained in SBE and to test the use of hexane in the trans-esterification process. Optimization process was done by using the Response Surface Method (RSM. The variables studied included catalyst concentration and reaction time. On the other hand, the deoiled SBE resulted from biodiesel production was tested as an adsorbent on biodiesel purification after being reactivated. The method used in the biodiesel production included an in situ acid catalysed esterification followed by in situ base catalysed trans-esterification. The results of RSM showed that the optimum process was obtained at NaOH concentration of 1.8% and reaction time of 104.73 minutes, with a predicted response rate of 97.18% and 95.63% for validation results. The use of hexane could also increase the yield of biodiesel which was obtained on the ratio of hexane to methanol of 0.4:1 (volume of hexane: volume of methanol. On the other hand, the reactivated bleaching earth was effective as an adsorbent in biodiesel production, which was still conform with the Indonesian National Standard.

  6. Controlled continuous bio-hydrogen production using different biogas release strategies.

    Science.gov (United States)

    Esquivel-Elizondo, S; Chairez, I; Salgado, E; Aranda, J S; Baquerizo, G; Garcia-Peña, E I

    2014-08-01

    Dark fermentation for bio-hydrogen (bio-H2) production is an easily operated and environmentally friendly technology. However, low bio-H2 production yield has been reported as its main drawback. Two strategies have been followed in the past to improve this fact: genetic modifications and adjusting the reaction conditions. In this paper, the second one is followed to regulate the bio-H2 release from the reactor. This operating condition alters the metabolic pathways and increased the bio-H2 production twice. Gas release was forced in the continuous culture to study the equilibrium in the mass transfer between the gaseous and liquid phases. This equilibrium depends on the H2, CO2, and volatile fatty acids production. The effect of reducing the bio-H2 partial pressure (bio-H2 pp) to enhance bio-H2 production was evaluated in a 30 L continuous stirred tank reactor. Three bio-H2 release strategies were followed: uncontrolled, intermittent, and constant. In the so called uncontrolled fermentation, without bio-H2 pp control, a bio-H2 molar yield of 1.2 mol/mol glucose was obtained. A sustained low bio-H2 pp of 0.06 atm increased the bio-H2 production rate from 16.1 to 108 mL/L/h with a stable bio-H2 percentage of 55% (v/v) and a molar yield of 1.9 mol/mol glucose. Biogas release enhanced bio-H2 production because lower bio-H2 pp, CO2 concentration, and reduced volatile fatty acids accumulation prevented the associated inhibitions and bio-H2 consumption.

  7. Comparison of Radicular Peroxide Leakage from four Commonly used Bleaching agents following Intracoronal Bleaching in Endodontically treated teeth - An In Vitro Study.

    Science.gov (United States)

    Madhu, Ks; Hegde, Swaroop; Mathew, Sylvia; Lata, DA; Bhandi, Shilpa H; N, Shruthi

    2013-08-01

    Non vital bleaching is simple, conservative procedure for esthetic correction of discolored endodontically treated teeth. The aim of this study was to determine and compare the amount of peroxide leakage from four different bleaching agents i.e superoxol, sodium perborate, combination of superoxol & sodium perborate and carbamide peroxide during intracoronal bleaching, as the safe and effective bleaching is the need of the hour. 50 extracted maxillary centrals were selected for the study. Following standardized protocol access, cleaning and shaping by step back technique and obturation was done using guttapercha and AH plus sealer. Access was sealed with Cavit G and outer root surface was coated with wax and nail varnish. The teeth were separated into crown and root and the root portion was placed in plastic tube containing distilled water for 7days.After incubation, 3mm of gutta-percha was removed below CEJ and 2mm glass ionomer cement base was placed. Grouped into five categories based on the bleaching agent placed in pulp chamber as -group1 (control)-distilled water, group 2-sodium perborate with distilled water , group 3- 30% hydrogen peroxide ,group 4-mixture of sodium perborate and 30% hydrogen peroxide and group 5-10% carbamide peroxide gel. Peroxide leakage was measured after 24hrs using ferrothiocyanate method and optical density using spectrophotometer. Statistical analysis of the data was conducted using ANOVA and multiple comparisons within the groups was done using BONFERRONI method (Post-Hoc tests). The results showed highest peroxide penetration from 30% hydrogen peroxide followed by mixture of sodium perborate with 30% hydrogen peroxide, mixture of sodium perborate with distilled water and least penetration from 10% carbamide peroxide gel. The results were statistically significant. Radicular peroxide leakage in 10% carbamide peroxide was significantly lower than the other tested bleaching agents making it a very safe alternative for intracoronal

  8. Public Perception of Bio fuels; Percepcion Publica de los Biocombustibles

    Energy Technology Data Exchange (ETDEWEB)

    Oltra, C.; Priolo, V.

    2011-11-10

    The deployment of bio fuels has generated a significant controversy in the energy, agricultural and environmental fields. Governments and promoters around the world have advocated for developing bio fuels based on their potential contribution to emissions reduction and energy security. But opposition to bio fuels has growth in the last years. Environmental NGO's and other stake holders have called for a review of the environmental and social sustainability of energy crops. This controversy has characterized the public debate around bio fuels. In this context, and given the need to improve public involvement in energy technologies, this article reports an investigation of Spanish citizens' perceptions about bio fuels. The study investigated the perceptions of informed citizens and the reasoning basis underlying beliefs and attitudes. The study finds an initial positive association of bio fuels to a clean and natural fuel that is mitigated by participants' concerns on the practical usage of bio fuels and the social and environmental impacts. Study participants' reactions show the need to differentiate among the diverse groups of publics holding differing views and a different reaction to information on the benefits and costs of bio fuels. (Author) 9 refs.

  9. Research on determination of bio-burden for radiation sterilization of health care products

    International Nuclear Information System (INIS)

    Liu Qinfang

    2008-01-01

    In order to provide data of bio-burden for dose setting in radiation sterilization, determination of bio-burden on 148 kinds of health care products from 52 manufacturers were carried out. The culture of microorganisms, different elution technology, and correction coefficient of the microbiological methods have been used for determination of bio-burden. Frequent distribution of bio-burden was established. 5 kinds of elution processes were checked. Actual data of bio-burden for dose setting in radiation sterilization was gotten. (authors)

  10. NEDO Forum 2001. Session on biotechnology (Post-genome forefront - diversity of sugar chains); NEDO Forum 2001. Bio technology session (post genome no saizensen - tosa no tayosei)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-20

    The presentations made at the above-named session of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. Explained in a lecture entitled 'Need of sugar chain synthesis gene library construction and its practical application' were types of composites, intracellular sugar modification, and the functions and structures of sugar chains. Pointed out was the need of research guidelines penetrating into the post-genome generation and further into the third generation featuring glycoproteomics. Stated in a lecture entitled 'Dream of automatic sugar chain synthesis: Realized at last by merger of chemistry and organisms' was the organic synthesis of enzymes challenging the construction of apparatuses for organic synthesis and automatic sugar synthesis for the elucidation of sugar chain biosynthesis, mechanism of metabolism, and sugar chain function expression. Explained in a lecture entitled 'Sugar science opening the door to the world of innovative material creation' were the sulphation of side chain type glucidic macromolecules, their resistance to blood coagulation, adjustment of sulfated glucidic macromolecule grafted polyethylene film, and the evaluation of its interaction with blood components. (NEDO)

  11. International Collaboration on bio-hydrogen R and D. Report for the Research Institute of Innovative Technology for the Earth (RITE), Tokyo, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Huesing, B.

    1998-01-01

    In order to solve the problem of the foreseeable depletion of fossil energy resources and of expected global climatic changes due to the emission of greenhouse gases future energy systems are required which meet the growing world energy demand but do not depend on fossil fuels. One possible option which is discussed as a clean and environmentally friendly energy source for the 21{sup st} century is the conversion of solar energy into hydrogen. Hydrogen as an environmentally friendly energy source can also be an integral part of a zero-emission economy because it can contribute to the minimization of toxic dispersion (especially the greenhouse gas CO{sub 2}) and to the maximization of sustainable use of renewable resources. It has been known for more than 50 years that certain living organisms are able to produce hydrogen. Biological hydrogen production has several comparative advantages over competing hydrogen production technologies such as photovoltaic or solarthermic electricity generation plus water hydrolysis. These advantages are - simpler systems: hydrogen production from direct water splitting without involvement of electricity/electrolysis, - self-regenerating systems, - biologically degradable systems: disposal can be coupled to the production of additional value-added substances, - flexible systems: production organisms can adapt to changing environmental conditions, - versatile systems: production organisms which are tailor-made to special environmental conditions can be selected. (orig.)

  12. Bio-logging of physiological parameters in higher marine vertebrates

    Science.gov (United States)

    Ponganis, Paul J.

    2007-02-01

    Bio-logging of physiological parameters in higher marine vertebrates had its origins in the field of bio-telemetry in the 1960s and 1970s. The development of microprocessor technology allowed its first application to bio-logging investigations of Weddell seal diving physiology in the early 1980s. Since that time, with the use of increased memory capacity, new sensor technology, and novel data processing techniques, investigators have examined heart rate, temperature, swim speed, stroke frequency, stomach function (gastric pH and motility), heat flux, muscle oxygenation, respiratory rate, diving air volume, and oxygen partial pressure (P) during diving. Swim speed, heart rate, and body temperature have been the most commonly studied parameters. Bio-logging investigation of pressure effects has only been conducted with the use of blood samplers and nitrogen analyses on animals diving at isolated dive holes. The advantages/disadvantages and limitations of recording techniques, probe placement, calibration techniques, and study conditions are reviewed.

  13. Bio-Culturalism

    DEFF Research Database (Denmark)

    Grodal, Torben Kragh

    2007-01-01

    The article argues on the basis of analyses of successful films for children that not only cultural determinants but also innate determinats are important, and that film studies should combine cultural studies with cognitive theory, evolutionary theory and neuroscience, an approach that is called...... Bio-culturalism....

  14. BioFET-SIM

    DEFF Research Database (Denmark)

    Hediger, M. R.; Martinez, K. L.; Nygård, J.

    2013-01-01

    Biosensors based on nanowire field effect transistor (FET) have received much attention in recent years as a way to achieve ultra-sensitive and label-free sensing of molecules of biological interest. The BioFET-SIM computer model permits the analysis and interpretation of experimental sensor sign...... strength, analyte concentration, and analyte relative orientation on nanowire surface are illustrated. Wherever possible, a comparison to experimental data available in literature is given, displaying the potential of BioFETSIM for interpreting experimental results.......Biosensors based on nanowire field effect transistor (FET) have received much attention in recent years as a way to achieve ultra-sensitive and label-free sensing of molecules of biological interest. The BioFET-SIM computer model permits the analysis and interpretation of experimental sensor...... signals through its web-based interface www.biofetsim.org. The model also allows for predictions of the effects of changes in the experimental setup on the sensor signal. After an introduction to nanowire-based FET biosensors, this chapter reviews the theoretical basis of BioFET-SIM models describing both...

  15. Beehold : the colony of the honeybee (Apis mellifera L) as a bio-sampler for pollutants and plant pathogens

    NARCIS (Netherlands)

    Steen, van der J.J.M.

    2016-01-01

    Bio-sampling is a function of bio-indication. Bio-indication with honeybee colonies (Apis mellifera L) is where the research fields of environmental technology and apiculture overlap. The honeybees are samplers of the environment by collecting unintentionally and simultaneously, along

  16. Beehold : the colony of the honeybee (Apis mellifera L) as a bio-sampler for pollutants and plant pathogens

    NARCIS (Netherlands)

    Steen, van der J.J.M.

    2016-01-01

    Bio-sampling is a function of bio-indication. Bio-indication with honeybee colonies (Apis mellifera L) is where the research fields of environmental technology and apiculture overlap. The honeybees are samplers of the environment by collecting unintentionally and simultaneously, along with nectar,

  17. Panorama 2011: Water and bio-fuels

    International Nuclear Information System (INIS)

    Lorne, D.

    2011-01-01

    Nowadays, water is seen as a major sustainability criterion for bio-energies. Although the biofuels being produced by food crops are subject to the same risks as the farming sector as far as water resources are concerned, future sectors have a significant potential to reduce these risks, and this potential needs to be better understood in order for biofuels as a resource and their related technologies to develop properly. (authors)

  18. Diamond bio electronics.

    Science.gov (United States)

    Linares, Robert; Doering, Patrick; Linares, Bryant

    2009-01-01

    The use of diamond for advanced applications has been the dream of mankind for centuries. Until recently this dream has been realized only in the use of diamond for gemstones and abrasive applications where tons of diamonds are used on an annual basis. Diamond is the material system of choice for many applications, but its use has historically been limited due to the small size, high cost, and inconsistent (and typically poor) quality of available diamond materials until recently. The recent development of high quality, single crystal diamond crystal growth via the Chemical Vapor Deposition (CVD) process has allowed physcists and increasingly scientists in the life science area to think beyond these limitations and envision how diamond may be used in advanced applications ranging from quantum computing, to power generation and molecular imaging, and eventually even diamond nano-bots. Because of diamond's unique properties as a bio-compatible material, better understanding of diamond's quantum effects and a convergence of mass production, semiconductor-like fabrication process, diamond now promises a unique and powerful key to the realization of the bio-electronic devices being envisioned for the new era of medical science. The combination of robust in-the-body diamond based sensors, coupled with smart bio-functionalized diamond devices may lead to diamond being the platform of choice for bio-electronics. This generation of diamond based bio-electronic devices would contribute substantially to ushering in a paradigm shift for medical science, leading to vastly improved patient diagnosis, decrease of drug development costs and risks, and improved effectiveness of drug delivery and gene therapy programs through better timed and more customized solutions.

  19. Optical Emission Spectroscopy of an Atmospheric Pressure Plasma Jet During Tooth Bleaching Gel Treatment.

    Science.gov (United States)

    Šantak, Vedran; Zaplotnik, Rok; Tarle, Zrinka; Milošević, Slobodan

    2015-11-01

    Optical emission spectroscopy was performed during atmospheric pressure plasma needle helium jet treatment of various tooth-bleaching gels. When the gel sample was inserted under the plasma plume, the intensity of all the spectral features increased approximately two times near the plasma needle tip and up to two orders of magnitude near the sample surface. The color change of the hydroxylapatite pastille treated with bleaching gels in conjunction with the atmospheric pressure plasma jet was found to be in correlation with the intensity of OH emission band (309 nm). Using argon as an additive to helium flow (2 L/min), a linear increase (up to four times) of OH intensity and, consequently, whitening (up to 10%) of the pastilles was achieved. An atmospheric pressure plasma jet activates bleaching gel, accelerates OH production, and accelerates tooth bleaching (up to six times faster).

  20. Sugar enrichment provides evidence for a role of nitrogen fixation in coral bleaching

    KAUST Repository

    Pogoreutz, Claudia

    2017-04-21

    The disruption of the coral-algae symbiosis (coral bleaching) due to rising sea surface temperatures has become an unprecedented global threat to coral reefs. Despite decades of research, our ability to manage mass bleaching events remains hampered by an incomplete mechanistic understanding of the processes involved. In this study, we induced a coral bleaching phenotype in the absence of heat and light stress by adding sugars. The sugar addition resulted in coral symbiotic breakdown accompanied by a fourfold increase of coral-associated microbial nitrogen fixation. Concomitantly, increased N:P ratios by the coral host and algal symbionts suggest excess availability of nitrogen and a disruption of the nitrogen limitation within the coral holobiont. As nitrogen fixation is similarly stimulated in ocean warming scenarios, here we propose a refined coral bleaching model integrating the cascading effects of stimulated microbial nitrogen fixation. This model highlights the putative role of nitrogen-fixing microbes in coral holobiont functioning and breakdown.

  1. Post-bleaching coral community change on southern Maldivian reefs: is there potential for rapid recovery?

    Science.gov (United States)

    Perry, C. T.; Morgan, K. M.

    2017-12-01

    Given the severity of the 2016 global bleaching event, there are major questions about how quickly reef communities will recover. Here, we explore the ecological and physical structural changes that occurred across five atoll interior reefs in the southern Maldives using data collected at 6 and 12 months post-bleaching. Following initial severe coral mortality, further minor coral mortality had occurred by 12 months post-bleaching, and coral cover is now low (<6%). In contrast, reef rugosity has continued to decline over time, and our observations suggest transitions to rubble-dominated states will occur in the near future. Juvenile coral densities in shallow fore-reef habitats are also exceptionally low (<6 individuals m-2), well below those measured 9-12 months following the 1998 bleaching event, and below recovery thresholds identified on other Indian Ocean reefs. Our findings suggest that the physical structure of these reefs will need to decline further before effective recruitment and recovery can begin.

  2. NOAA's Coral Reef Conservation Program: 2016 Projects Monitoring the Effects of Thermal Stress on Coral Bleaching

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Climate change impacts have been identified as one of the greatest global threats to coral reef ecosystems. As temperature rise, mass bleaching, and infectious...

  3. Physicochemical properties and oxidative stability of bleached pomace-olive oil on Tunisian activated clays

    International Nuclear Information System (INIS)

    Jahouach, Wafa

    2002-01-01

    This work is a contribution to studying bleaching process, which is an important stage in refining of vegetable oils. This process permitted to reduce or convert undesired constituents to harmless ones from oils and fats. Virgin olive oil, considered as reference, and pomace-olive oil were bleached in optimal conditions using Tunisian activated clays ( collected from the South of Tunisia) which were prepared in our laboratory and compared with commercial bleaching earths. It was shown that activated Tunisian clays are characterized by a very important adsorptive capacity, which is similar to that of commercial ones. In addition, the study of physicochemical properties of bleached oils was considered. The fatty acid composition (GC), the triacylglycerol composition (HPLC), and oxidative stability (UV spectrometry) allowed to conclude that treated oils do not undergo considerable physicochemical alterations and their caracteristics remain in concordance with international standards relative to edible refined oils. (Author)

  4. Short-term coral bleaching is not recorded by skeletal boron isotopes.

    Science.gov (United States)

    Schoepf, Verena; McCulloch, Malcolm T; Warner, Mark E; Levas, Stephen J; Matsui, Yohei; Aschaffenburg, Matthew D; Grottoli, Andréa G

    2014-01-01

    Coral skeletal boron isotopes have been established as a proxy for seawater pH, yet it remains unclear if and how this proxy is affected by seawater temperature. Specifically, it has never been directly tested whether coral bleaching caused by high water temperatures influences coral boron isotopes. Here we report the results from a controlled bleaching experiment conducted on the Caribbean corals Porites divaricata, Porites astreoides, and Orbicella faveolata. Stable boron (δ11B), carbon (δ13C), oxygen (δ18O) isotopes, Sr/Ca, Mg/Ca, U/Ca, and Ba/Ca ratios, as well as chlorophyll a concentrations and calcification rates were measured on coral skeletal material corresponding to the period during and immediately after the elevated temperature treatment and again after 6 weeks of recovery on the reef. We show that under these conditions, coral bleaching did not affect the boron isotopic signature in any coral species tested, despite significant changes in coral physiology. This contradicts published findings from coral cores, where significant decreases in boron isotopes were interpreted as corresponding to times of known mass bleaching events. In contrast, δ13C and δ18O exhibited major enrichment corresponding to decreases in calcification rates associated with bleaching. Sr/Ca of bleached corals did not consistently record the 1.2°C difference in seawater temperature during the bleaching treatment, or alternatively show a consistent increase due to impaired photosynthesis and calcification. Mg/Ca, U/Ca, and Ba/Ca were affected by coral bleaching in some of the coral species, but the observed patterns could not be satisfactorily explained by temperature dependence or changes in coral physiology. This demonstrates that coral boron isotopes do not record short-term bleaching events, and therefore cannot be used as a proxy for past bleaching events. The robustness of coral boron isotopes to changes in coral physiology, however, suggests that reconstruction of

  5. The impact of iron on the bleaching efficacy of hydrogen peroxide in liquid whey systems.

    Science.gov (United States)

    Jervis, Suzanne M; Drake, MaryAnne

    2013-02-01

    Whey is a value-added product that is utilized in many food and beverage applications for its nutritional and functional properties. Whey and whey products are generally utilized in dried ingredient applications. One of the primary sources of whey is from colored Cheddar cheese manufacture that contains the pigment annatto resulting in a characteristic yellow colored Cheddar cheese. The colorant is also present in the liquid cheese whey and must be bleached so that it can be used in ingredient applications without imparting a color. Hydrogen peroxide and benzoyl peroxide are 2 commercially approved chemical bleaching agents for liquid whey. Concerns regarding bleaching efficacy, off-flavor development, and functionality changes have been previously reported for whey bleached with hydrogen peroxide and benzoyl peroxide. It is very important for the dairy industry to understand how bleaching can impact flavor and functionality of dried ingredients. Currently, the precise mechanisms of off-flavor development and functionality changes are not entirely understood. Iron reactions in a bleached liquid whey system may play a key role. Reactions between iron and hydrogen peroxide have been widely studied since the reaction between these 2 relatively stable species can cause great destruction in biological and chemical systems. The actual mechanism of the reaction of iron with hydrogen peroxide has been a controversy in the chemistry and biological community. The precise mechanism for a given reaction can vary greatly based upon the concentration of reactants, temperature, pH, and addition of biological material. In this review, some hypotheses for the mechanisms of iron reactions that may occur in fluid whey that may impact bleaching efficacy, off-flavor development, and changes in functionality are presented. Cheese whey is bleached to remove residual carotenoid cheese colorant. Concerns regarding bleaching efficacy, off-flavor development, and functionality changes have

  6. The effect of bleaching agent on the flavor of liquid whey and whey protein concentrate.

    Science.gov (United States)

    Croissant, A E; Kang, E J; Campbell, R E; Bastian, E; Drake, M A

    2009-12-01

    The increasing use and demand for whey protein as an ingredient requires a bland-tasting, neutral-colored final product. The bleaching of colored Cheddar whey is necessary to achieve this goal. Currently, hydrogen peroxide (HP) and benzoyl peroxide (BPO) are utilized for bleaching liquid whey before spray drying. There is no current information on the effect of the bleaching process on the flavor of spray-dried whey protein concentrate (WPC). The objective of this study was to characterize the effect of bleaching on the flavor of liquid and spray-dried Cheddar whey. Cheddar cheeses colored with water-soluble annatto were manufactured in duplicate. Four bleaching treatments (HP, 250 and 500 mg/kg and BPO, 10 and 20 mg/kg) were applied to liquid whey for 1.5 h at 60 degrees C followed by cooling to 5 degrees C. A control whey with no bleach was also evaluated. Flavor of the liquid wheys was evaluated by sensory and instrumental volatile analysis. One HP treatment and one BPO treatment were subsequently selected and incorporated into liquid whey along with an unbleached control that was processed into spray-dried WPC. These trials were conducted in triplicate. The WPC were evaluated by sensory and instrumental analyses as well as color and proximate analyses. The HP-bleached liquid whey and WPC contained higher concentrations of oxidation reaction products, including the compounds heptanal, hexanal, octanal, and nonanal, compared with unbleached or BPO-bleached liquid whey or WPC. The HP products were higher in overall oxidation products compared with BPO samples. The HP liquid whey and WPC were higher in fatty and cardboard flavors compared with the control or BPO samples. Hunter CIE Lab color values (L*, a*, b*) of WPC powders were distinct on all 3 color scale parameters, with HP-bleached WPC having the highest L* values. Hydrogen peroxide resulted in a whiter WPC and higher off-flavor intensities; however, there was no difference in norbixin recovery between HP

  7. Influence of pH, bleaching agents, and acid etching on surface wear of bovine enamel

    Science.gov (United States)

    Soares, Ana Flávia; Bombonatti, Juliana Fraga Soares; Alencar, Marina Studart; Consolmagno, Elaine Cristina; Honório, Heitor Marques; Mondelli, Rafael Francisco Lia

    2016-01-01

    ABSTRACT Development of new materials for tooth bleaching justifies the need for studies to evaluate the changes in the enamel surface caused by different bleaching protocols. Objective The aim of this study was to evaluate the bovine dental enamel wear in function of different bleaching gel protocols, acid etching and pH variation. Material and Methods Sixty fragments of bovine teeth were cut, obtaining a control and test areas. In the test area, one half received etching followed by a bleaching gel application, and the other half, only the bleaching gel. The fragments were randomly divided into six groups (n=10), each one received one bleaching session with five hydrogen peroxide gel applications of 8 min, activated with hybrid light, diode laser/blue LED (HL) or diode laser/violet LED (VHL) (experimental): Control (C); 35% Total Blanc Office (TBO35HL); 35% Lase Peroxide Sensy (LPS35HL); 25% Lase Peroxide Sensy II (LPS25HL); 15% Lase Peroxide Lite (LPL15HL); and 10% hydrogen peroxide (experimental) (EXP10VHL). pH values were determined by a pHmeter at the initial and final time periods. Specimens were stored, subjected to simulated brushing cycles, and the superficial wear was determined (μm). ANOVA and Tukey´s tests were applied (α=0.05). Results The pH showed a slight decrease, except for Group LPL15HL. Group LPS25HL showed the highest degree of wear, with and without etching. Conclusion There was a decrease from the initial to the final pH. Different bleaching gels were able to increase the surface wear values after simulated brushing. Acid etching before bleaching increased surface wear values in all groups. PMID:27008254

  8. Understanding the Nature and Reactivity of Residual Lignin for Improved Pulping and Bleaching Efficiency; FINAL

    International Nuclear Information System (INIS)

    Yuan-Zong Lai

    2001-01-01

    One of the most formidable challenges in kraft pulping to produce bleached chemical pulps is how to effectively remove the last 5-10% of lignin while maintaining the fiber quality. To avoid a severe fiber degradation, kraft pulping is usually terminated in the 25-30 kappa number range and then followed by an elementally chlorine free (ECF) or a totally chlorine free (TCF) bleaching sequence to reduce the environmental impacts

  9. Effects of staining and bleaching on color change of dental composite resins.

    Science.gov (United States)

    Villalta, Patricia; Lu, Huan; Okte, Zeynep; Garcia-Godoy, Franklin; Powers, John M

    2006-02-01

    Discoloration of resin-based composites by colored solutions is a common problem. The use of bleaching agents for discolored natural teeth is becoming increasingly popular. It is not clear if bleaching agents can remove the stain from composite resins. The purpose of this study was to investigate the effects of 2 staining solutions and 3 bleaching systems on the color changes of 2 dental composite resins. Forty-five disk-shaped specimens (9 x 2.5 mm) of each of 2 composite resins, Filtek Supreme (FS) and Esthet X (EX), were prepared. The specimens were then divided into 3 groups of 15 specimens each and immersed in 2 staining solutions (coffee or red wine) or distilled water (control) for 3 hours daily over a 40-day test period. The 3 groups were then divided into 3 subgroups (n = 5), and 3 bleaching agents (Crest Night Effects, Colgate Simply White Night, or Opalescence Quick) were applied to the surface of the specimens over a 14-day period. Color of the specimens was measured with a spectrophotometer using CIELAB color space relative to CIE standard illuminant D55 at baseline, after staining, and after bleaching. The color differences (deltaE(ab)*) between the 3 measurements were calculated. The value deltaE(ab)* = 3.3 was used as an acceptable value in subjective visual evaluations. Analysis of variance and nonparametric analysis (Kruskal-Wallis test and Mann-Whitney test) were used to analyze the data. After staining, FS had more color change than EX and was more affected by the wine solution. After bleaching, the color of both EX and FS specimens returned to the baseline. The color differences between bleaching and baseline were less than value deltaE(ab)* = 3.3 for all groups. The nanocomposite (FS) changed color more than the microhybrid composite (EX) as a result of staining in coffee or red wine solutions. After bleaching, discoloration was removed completely from the composite resins tested.

  10. Effects of Light Activation, Agent Concentration, and Tooth Thickness on Dental Sensitivity After Bleaching

    OpenAIRE

    Moncada, G.; Sepulveda, D.; Elphick, K.; Contente, M.; Estay, J.; Bahamondes, V.; Fernandez, E.; Oliveira, O. B. [UNESP; Martin, J.

    2013-01-01

    Examining three bleaching systems, this in vivo clinical trial evaluated the relationship among tooth sensitivity, light activation, and agent concentration, and it correlated dental sensitivity with tooth thickness.Materials and Methods: Eighty-seven volunteer patients were included. Inclusion criteria were the presence of anterior teeth without restorations as well as the absence of a previous bleaching experience and absence of non-carious cervical lesions or dental pain. Exclusion criteri...

  11. Understanding the Nature and Reactivity of Residual Lignin for Improved Pulping and Bleaching Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Yuan-Zong Lai

    2001-11-30

    One of the most formidable challenges in kraft pulping to produce bleached chemical pulps is how to effectively remove the last 5-10% of lignin while maintaining the fiber quality. To avoid a severe fiber degradation, kraft pulping is usually terminated in the 25-30 kappa number range and then followed by an elementally chlorine free (ECF) or a totally chlorine free (TCF) bleaching sequence to reduce the environmental impacts.

  12. Study of fish oil bleaching using the sodium bentonite through a factorial design

    OpenAIRE

    Marcia Regina Simões; Reinaldo Aparecido Bariccatti; Caio Guilherme Secco Souza; José Dilson Silva de Oliveira

    2011-01-01

    This work was a experimental design in order to optimize the process of bleaching of fish oil, using the sodium bentonite as adsorbent, from the influence of variables such as weight of sodium bentonite, the temperature process, thermal activation of sodium bentonite and time of agitation. It was then possible to fit a mathematical model with the influence of each variable in the process of bleaching of the oil. The response variable was the absorbance at 444 nm.

  13. Study of fish oil bleaching using the sodium bentonite through a factorial design

    Directory of Open Access Journals (Sweden)

    Marcia Regina Simões

    2011-06-01

    Full Text Available This work was a experimental design in order to optimize the process of bleaching of fish oil, using the sodium bentonite as adsorbent, from the influence of variables such as weight of sodium bentonite, the temperature process, thermal activation of sodium bentonite and time of agitation. It was then possible to fit a mathematical model with the influence of each variable in the process of bleaching of the oil. The response variable was the absorbance at 444 nm.

  14. Study on the Modification of Bleached Eucalyptus Kraft Pulp Using Birch Xylan

    Science.gov (United States)

    Wenjia Han; Chuanshan Zhao; Thomas Elder; Rendang Yang; Dongho Kim; Yunqiao Pu; Jeffery Hsieh; Arthur J. Ragauskas

    2012-01-01

    In this study, birch xylan was deposited onto elementally chlorine free (ECF) bleached eucalyptus kraft pulp, and the corresponding changes in physical properties were determined. An aqueous 5% birch xylan solution at pH 9 was added to 5 wt% slurry of bleached kraft eucalyptus fibers, with stirring at 70 C for 15 min after which the pH was adjusted to 5–6. The xylan...

  15. Effect of postoperative bleaching on microleakage of etch-and-rinse and self-etch adhesives

    Directory of Open Access Journals (Sweden)

    Vajihesadat Mortazavi

    2011-01-01

    Full Text Available Background: Bleaching the discoloured teeth may affect the tooth/composite interface. The aim of this in vitro experimental study was to evaluate the effect of vital tooth bleaching on microleakage of existent class V composite resin restorations bonded with three dental bonding agents. Methods : Class V cavities were prepared on buccal surfaces of 72 intact, extracted human anterior teeth with gingival margins in dentin and occlusal margins in enamel, and randomly divided into 3 groups. Cavities in the three groups were treated with Scotch bond Multi-Purpose, a total etch system and Prompt L-Pop and iBond, two self-etch adhesives. All teeth were restored with Z250 resin composite material and thermo-cycled. Each group was equally divided into the control and the bleached subgroups (n = 12. The bleached subgroups were bleached with 15% carbamide peroxide gel for 8 hours a day for 15 days. Microleakage scores were evaluated on the incisal and cervical walls. Data were analyzed using Kruskal-Wallis, Mann-Whitney and Bonferroni post-hoc tests (α = 0.05. Results: Bleaching with carbamide peroxide gel significantly increased the microleakage of composite restorations in Prompt L-Pop group at dentinal walls (P = 0.001. Bleaching had no effect on microleakage of restorations in the Scotch bond Multi-Purpose and iBond groups. Conclusion: Vital tooth bleaching with carbamide peroxide gel has an adverse effect on marginal seal of dentinal walls of existent composite resin restorations bonded with prompt L-Pop self-etch adhesive.

  16. The effect of baking soda when applied to bleached enamel prior to restorative treatment.

    Science.gov (United States)

    Tostes, Bhenya Ottoni; Mondelli, Rafael Francisco Lia; Lima-Arsati, Ynara Bosco de Oliveira; Rodrigues, Jose Augusto; Costa, Leonardo Cesar

    2013-08-01

    This in vitro study evaluated the effect of 10% baking soda solution and sodium bicarbonate powder (applied with jets) when applied to bleached enamel prior to restorative treatment. The surfaces of 40 bovine incisors were flattened and divided into 5 groups (n = 8): Group B (bleached and restored, negative control), Group W (bleached, stored in distilled water for 7 days, and restored), Group BSJ (bleached, abraded with baking soda jet for 1 min, and restored), Group BSS (bleached, application of 10% baking soda solution for 5 min, and restored), and Group R (restored, without bleaching, positive control). The samples were bleached in 1 session with 3 applications of 35% HP-based gel and activated with a LED appliance for 9 min each. Resin composite cylinders (2 mm height and 0.8 mm diameter) were made on the enamel surface after the acid etching and a conventional 1-step single vial adhesive application was performed. After storage in distilled water (37 ± 1°C, 24 hr), the microshear bond test was performed (1 mm/min). ANOVA and Tukey tests were applied to compare the results. The mean results of these tests showed that Groups W, BBS, and R were not statistically different. These groups also indicated a higher bond strength when compared with Groups B and BSJ. The application of 10% baking soda solution for 5 min may be an alternative pre-restorative treatment for bleached enamel, but further studies are needed to consider whether or not this treatment may be effectively used in clinical practice.

  17. Photoconductivity and bleaching of trapped electrons at 770C in irradiated methylcyclohexane

    International Nuclear Information System (INIS)

    Dolivo, G.; Gaeumann, T.

    1977-01-01

    The influence of the wavelength and intensity of the bleaching radiation on the thermoluminescence, thermoconductivity, optical absorption and photoconductivity of the methylcyclohexane, protonated and deuterated, was studied. The energy level scheme of the trapped electron in this alkane is very similar to that found in MTHF and 3-MP. The rate of bleaching of the trapped electrons is less in the deuterated product. (U.K.)

  18. Predicting Heat Stress to Inform Reef Management: NOAA Coral Reef Watch's 4-Month Coral Bleaching Outlook

    OpenAIRE

    Gang Liu; Gang Liu; C. Mark Eakin; Mingyue Chen; Arun Kumar; Jacqueline L. De La Cour; Jacqueline L. De La Cour; Scott F. Heron; Scott F. Heron; Scott F. Heron; Erick F. Geiger; Erick F. Geiger; William J. Skirving; William J. Skirving; Kyle V. Tirak

    2018-01-01

    The U.S. National Oceanic and Atmospheric Administration's (NOAA) Coral Reef Watch (CRW) operates a global 4-Month Coral Bleaching Outlook system for shallow-water coral reefs in collaboration with NOAA's National Centers for Environmental Prediction (NCEP). The Outlooks are generated by applying the algorithm used in CRW's operational satellite coral bleaching heat stress monitoring, with slight modifications, to the sea surface temperature (SST) predictions from NCEP's operational Climate F...

  19. High-resolution modeling of thermal thresholds and environmental influences on coral bleaching for local and regional reef management.

    Science.gov (United States)

    Kumagai, Naoki H; Yamano, Hiroya

    2018-01-01

    Coral reefs are one of the world's most threatened ecosystems, with global and local stressors contributing to their decline. Excessive sea-surface temperatures (SSTs) can cause coral bleaching, resulting in coral death and decreases in coral cover. A SST threshold of 1 °C over the climatological maximum is widely used to predict coral bleaching. In this study, we refined thermal indices predicting coral bleaching at high-spatial resolution (1 km) by statistically optimizing thermal thresholds, as well as considering other environmental influences on bleaching such as ultraviolet (UV) radiation, water turbidity, and cooling effects. We used a coral bleaching dataset derived from the web-based monitoring system Sango Map Project, at scales appropriate for the local and regional conservation of Japanese coral reefs. We recorded coral bleaching events in the years 2004-2016 in Japan. We revealed the influence of multiple factors on the ability to predict coral bleaching, including selection of thermal indices, statistical optimization of thermal thresholds, quantification of multiple environmental influences, and use of multiple modeling methods (generalized linear models and random forests). After optimization, differences in predictive ability among thermal indices were negligible. Thermal index, UV radiation, water turbidity, and cooling effects were important predictors of the occurrence of coral bleaching. Predictions based on the best model revealed that coral reefs in Japan have experienced recent and widespread bleaching. A practical method to reduce bleaching frequency by screening UV radiation was also demonstrated in this paper.

  20. Does a toothpaste containing blue covarine have any effect on bleached teeth? An in vitro, randomized and blinded study.

    Science.gov (United States)

    Bortolatto, Janaina Freitas; Dantas, Andrea Abi Rached; Roncolato, Ávery; Merchan, Hugo; Floros, Michael Christopher; Kuga, Milton Carlos; Oliveira Junior, Osmir Batista de

    2016-01-01

    The objective of this study was to analyze the effect of bleaching toothpastes, both conventional and those containing the new whitening agent Blue Covarine, on teeth previously bleached by conventional techniques (in-office and at-home). Squared bovine enamel/dentin blocks (6.0 x 6.0 x 2.0 mm) were randomly distributed in 6 groups (n = 15), according to the technique used to bleach them (in-office: HP35%; at-home: PC10%) and the type of bleaching toothpaste (none: control; Blue Covarine containing: BC; and without Blue Covarine: NBC). Experimental groups denominated HP35%, HP35%BC and HP35%NBC received in-office tooth bleaching before toothbrushing, and groups PC10%, PC10%BC and PC10%NBC were subjected to at-home tooth bleaching prior to toothbrushing. After bleaching treatment, groups HP35%BC, PC10%BC, HP35%NBC and PC10%NBC underwent daily tooth brushing in a brushing machine for 3 minutes (150 strokes/min, with a load of 375 g). Tooth color alteration was measured by reflectance spectroscopy (Vita EasyShade, Vident, Brea, CA, USA) at: T0 (baseline) - after in-office or at-home bleaching treatment; T1 - immediately after tooth brushing; T2 - 7 days and T3 - 14 days after tooth brushing. Data was analyzed by repeated measures mixed ANOVA and the Bonferroni post hoc test, with a significance level of 5%. Statistically significant differences were found between different experimental groups, evaluation times and for the interaction between them (p brushing using either bleaching toothpaste (conventional or with Blue Covarine) showed no color alteration on teeth previously bleached by in-office and at-home tooth bleaching. The use of bleaching toothpastes on previously bleached teeth did not produce a color alteration.

  1. Does a toothpaste containing blue covarine have any effect on bleached teeth? An in vitro, randomized and blinded study

    Directory of Open Access Journals (Sweden)

    Janaina Freitas BORTOLATTO

    2016-01-01

    Full Text Available Abstract The objective of this study was to analyze the effect of bleaching toothpastes, both conventional and those containing the new whitening agent Blue Covarine, on teeth previously bleached by conventional techniques (in-office and at-home. Squared bovine enamel/dentin blocks (6.0 x 6.0 x 2.0 mm were randomly distributed in 6 groups (n = 15, according to the technique used to bleach them (in-office: HP35%; at-home: PC10% and the type of bleaching toothpaste (none: control; Blue Covarine containing: BC; and without Blue Covarine: NBC. Experimental groups denominated HP35%, HP35%BC and HP35%NBC received in-office tooth bleaching before toothbrushing, and groups PC10%, PC10%BC and PC10%NBC were subjected to at-home tooth bleaching prior to toothbrushing. After bleaching treatment, groups HP35%BC, PC10%BC, HP35%NBC and PC10%NBC underwent daily tooth brushing in a brushing machine for 3 minutes (150 strokes/min, with a load of 375 g. Tooth color alteration was measured by reflectance spectroscopy (Vita EasyShade, Vident, Brea, CA, USA at: T0 (baseline – after in-office or at-home bleaching treatment; T1 – immediately after tooth brushing; T2 - 7 days and T3 - 14 days after tooth brushing. Data was analyzed by repeated measures mixed ANOVA and the Bonferroni post hoc test, with a significance level of 5%. Statistically significant differences were found between different experimental groups, evaluation times and for the interaction between them (p < 0.001. Tooth brushing using either bleaching toothpaste (conventional or with Blue Covarine showed no color alteration on teeth previously bleached by in-office and at-home tooth bleaching. The use of bleaching toothpastes on previously bleached teeth did not produce a color alteration.

  2. Pulpal inflammation after vital tooth bleaching with 38% hydrogen peroxide

    Directory of Open Access Journals (Sweden)

    Ardiny Andriani

    2012-06-01

    Full Text Available Background: In-office vital tooth bleaching is a treatment to remove tooth stains. Tooth sensitivity is one of side effect commonly complained by patients receiving this treatment. Purpose: The aim of this study was to examine histological inflammatory cells infiltration of dental pulp after application of 38% H2O2 as a vital tooth bleaching agent. Methods: Under informed consent, a total of 15 premolars from 8 healthy subjects scheduled for orthodontic extraction were used in this study. Thirty eight percent H2O2 was applied on the buccal surface of the treated group. The treated teeth were extracted after 1 hour, 5, 8, and 15 days. All specimens were embedded in paraffin wax, sectioned serially and stained with Hematoxyllin Eosin. Histological specimens were then observed under a light microscope. Results: All treated groups showed a slight disorganization of odontoblasts layer and slight inflammation in the pulp tissue adjacent to the 38% H2O2 application site. The number of polymorphonuclear leukocytes (PMN had increased significantly 1 hour after application of 38% H2O2 (p<0.05, while macrophages had significantly increased 5 days after the application (p<0.05. The most intense PMN and macrophages infiltration was found 5 days after the application and gradually decreased 8 days after application of38% H2O2. Conclusion: Application of 38% H2O2 as a vital tooth bleaching agent induces acute inflammation in human dental pulp; however, the inflammation will decrease 8 days after the application.Latar belakang: Perawatan pemutihan gigi vital metode in-office merupakan tindakan untuk menghilangkan pewarnaan pada gigi. Salah satu efek samping yang sering dikeluhkan oleh pasien yang menjalani perawatan ini adalah sensitivitas gigi. Tujuan: Penelitian ini bertujuan untuk mengamati infiltrasi sel inflamasi pada pulpa gigi setelah aplikasi H2O2 38% sebagai bahan pemutih gigi. Metode: Sampel penelitian ini berupa 15 gigi premolar yang berasal dari 8

  3. Effect of delaying toothbrushing during bleaching on enamel surface roughness: an in vitro study.

    Science.gov (United States)

    Navimipour, E J; Mohammadi, N; Mostafazadeh, S; Ghojazadeh, M; Oskoee, P A

    2013-01-01

    This study aimed to evaluate the effect of toothbrushing on enamel surface roughness at three different intervals after daily bleaching treatment. Eighty enamel slabs were initially evaluated for surface roughness and then randomly divided into four groups. The bleaching procedure was carried out for 21 days, six hours daily. In the control group (group 1), the specimens were not brushed after bleaching, but in groups 2-4, they were brushed with toothpaste immediately, one hour, or two hours after bleaching, respectively. Then the specimens were stored in artificial saliva. Enamel surface roughness was reevaluated at the end of the period. Kruskal-Wallis and Mann-Whitney U tests showed statistically significant differences in the means of surface roughness values between the immediately brushed group and the three other groups (ptoothbrushing immediately after bleaching increased enamel surface roughness; however, postponing the procedure for one or two hours after daily bleaching and exposing the specimens to artificial saliva during the study period resulted in enamel surface roughness comparable to that of the control group.

  4. Improved microscopical detection of acid-fast bacilli by the modified bleach method in lymphnode aspirates

    Directory of Open Access Journals (Sweden)

    Annam Vamseedhar

    2009-07-01

    Full Text Available Objectives: To improve the smear microscopy for detection of acid-fast bacilli (AFB in fine needle aspiration cytology (FNAC of lymph node using the bleach method and also to compare this with cytological diagnosis and the conventional Ziehl-Neelsen (ZN method. Study Design: In 99 consecutive patients with clinical suspicion of tuberculosis (TB presenting with lymphadenopathy, FNACs were performed. Smears from the aspirates were processed for routine cytology and the conventional ZN method. The remaining material in the needle hub and/or the syringe was used for the bleach method. The significance of the bleach method over the conventional ZN method and cytology was analyzed using the χ2 test. Results: Of 99 aspirates, 93 were studied and the remaining six were excluded from the study due to diagnosis of malignancy in 4.04% (4/6 and inadequate aspiration in 2.02% (2/6. Among the 93 aspirates, 33.33% (31/93 were positive for AFB on conventional ZN method, 41.94% (39/93 were indicative of TB on cytology and the smear positivity increased to 63.44% (59/93 on bleach method. Conclusion: The bleach method is simple, inexpensive and potent disinfectant, also limiting the risk of laboratory-acquired infections. The implementation of the bleach method clearly improves microscopic detection and can be a useful contribution to routine cytology.

  5. Effect of two bleaching agents on enamel morphology: a SEM study

    Directory of Open Access Journals (Sweden)

    Ghavam M.

    2005-05-01

    Full Text Available Statement of Problem: Bleaching materials are able to change the surface morphology as well as mineral and organic content of tooth structure. Considering that bleaching is done for aesthetic purpose, awareness of the possible effect of these materials on hard tissue is important, because it may affect the restorative treatments. Purpose: The aim of this study was comparing the effect of two bleaching materials, Kimia and Ultradent both containing 35% H2O2, on tooth enamel by SEM. Materials and Methods: Five intact central incisors were cut into three sections vertically and each part was randomly divided into three groups. Group 1 (control, without any bleaching. Group 2, bleached with Kimia 35% H2O2. Group 3, bleached with Ultradent 35% H2O2. Each tooth served as its own control. Then the samples were observed by SEM with 250 and 500 magnifications. Results: In the control group some scratches and small white grains were observed which seems to be the result of mastication trauma and pumice powder. In the other groups, morphologic changes like increased surface roughness, deepening of cracks, rod exposure and presence of new cracks were observed. The two experimental materials did not differ in these regards. Conclusion: It seems that both studied materials have limited destructive effects on tooth enamel which seems to be of no clinical importance.

  6. Effect of Bleaching Gels on Surface Roughness of Nanofilled Composite Resins

    Science.gov (United States)

    Wang, Linda; Francisconi, Luciana Fávaro; Atta, Maria Teresa; dos Santos, Jean Rodrigo; Del Padre, Natália Coelho; Gonini, Alcides; Fernandes, Karen Barros Parron

    2011-01-01

    Objectives: The aim of this study was to investigate the superficial texture of composite restorations after different bleaching protocols. Methods: Filtek Supreme (S), Filtek Z350 (F), and Grandio (G) were compared to Opallis (O) and Filtek Z250 (Z) (control microhybrid composites) and to bovine enamel using three different bleaching agents: 35% hydrogen peroxide Whiteness HP (WHP), 35% Whiteness HP MAXX (WMAXX) and 16% carbamide peroxide Whiteness Standard (WS). Six specimens from each composite were treated using each bleaching agent, according to the manufacturers’ instructions. Three random sites were measured for superficial roughness (Hommel Tester T 1000) weekly for each sample. Data were analyzed for each bleaching system using two-way ANOVA and Bonferroni tests at 5% significance level. Results: WHP treatment significantly altered the Filtek Supreme composite over time. When WMAXX was used, Grandio displayed the most significant alterations in surface roughness throughout the evaluation period, which was not observed for the other nanocomposites. Using WS, Filtek Z250 presented significant surface alterations over time, which was not seen in the nanofilled materials. Conclusions: Surface roughness alteration was material and time-dependent. The bleaching gels affected nanofilled and microhybrid composite resins. Enamel was the surface less affected by bleaching. PMID:21494385

  7. Effect of Home Bleaching on Microleakage of Fiber-reinforced and Particle-filled Composite Resins

    Directory of Open Access Journals (Sweden)

    Farahnaz Sharafeddin

    2013-12-01

    Full Text Available Background and aims. Bleaching may exert some negative effects on existing composite resin restorations. The aim of this study was to evaluate the effect of home bleaching on microleakage of fiber-reinforced and particle-filled composite resins. Materials and methods. Ninety class V cavities (1.5×2×3 mm were prepared on the buccal surfaces of 90 bovine teeth. The teeth were randomly divided into 6 groups (n=15 and restored as follows: Groups 1 and 2 with Z100, groups 3 and 4 with Z250, and groups 5 and 6 with Nulite F composite resins. All the specimens were thermocycled. Groups 1, 3 and 5 were selected as control groups (without bleaching and the experimental groups 2, 4 and 6 were bleached with 22% carbamide peroxide gel. All the samples were immersed in 2% basic fuchsin dye for 24 hours and then sectioned longitudinally. Dye penetration was evaluated under a stereomicroscope (×25, at both the gingival and incisal margins. Data were analyzed using Kruskal-Wallis, Mann-Whitney and Wilcoxon tests (α=0.05. Results. Statistical analyses revealed that bleaching gel increased microleakage only at gingival margins with Z250 (P=0.007. Moreover, the control groups showed a statistically significant difference in microleakage at their gingival margins. Nulite F had the maximum microleakage while Z250 showed the minimum (P=0.006. Conclusion. Microleakage of home-bleached restorations might be related to the type of composite resin used.

  8. An effective ostrich oil bleaching technique using peroxide value as an indicator.

    Science.gov (United States)

    Palanisamy, Uma Devi; Sivanathan, Muniswaran; Radhakrishnan, Ammu Kutty; Haleagrahara, Nagaraja; Subramaniam, Thavamanithevi; Chiew, Gan Seng

    2011-07-05

    Ostrich oil has been used extensively in the cosmetic and pharmaceutical industries. However, rancidity causes undesirable chemical changes in flavour, colour, odour and nutritional value. Bleaching is an important process in refining ostrich oil. Bleaching refers to the removal of certain minor constituents (colour pigments, free fatty acid, peroxides, odour and non-fatty materials) from crude fats and oils to yield purified glycerides. There is a need to optimize the bleaching process of crude ostrich oil prior to its use for therapeutic purposes. The objective of our study was to establish an effective method to bleach ostrich oil using peroxide value as an indicator of refinement. In our study, we showed that natural earth clay was better than bentonite and acid-activated clay to bleach ostrich oil. It was also found that 1 hour incubation at a 150 °C was suitable to lower peroxide value by 90%. In addition, the nitrogen trap technique in the bleaching process was as effective as the continuous nitrogen flow technique and as such would be the recommended technique due to its cost effectiveness.

  9. An Effective Ostrich Oil Bleaching Technique Using Peroxide Value as an Indicator

    Directory of Open Access Journals (Sweden)

    Gan Seng Chiew

    2011-07-01

    Full Text Available Ostrich oil has been used extensively in the cosmetic and pharmaceutical industries. However, rancidity causes undesirable chemical changes in flavour, colour, odour and nutritional value. Bleaching is an important process in refining ostrich oil. Bleaching refers to the removal of certain minor constituents (colour pigments, free fatty acid, peroxides, odour and non-fatty materials from crude fats and oils to yield purified glycerides. There is a need to optimize the bleaching process of crude ostrich oil prior to its use for therapeutic purposes. The objective of our study was to establish an effective method to bleach ostrich oil using peroxide value as an indicator of refinement. In our study, we showed that natural earth clay was better than bentonite and acid-activated clay to bleach ostrich oil. It was also found that 1 hour incubation at a 150 °C was suitable to lower peroxide value by 90%. In addition, the nitrogen trap technique in the bleaching process was as effective as the continuous nitrogen flow technique and as such would be the recommended technique due to its cost effectiveness.

  10. Graded changes in enamel component volumes resulted from a short tooth bleaching procedure.

    Science.gov (United States)

    Ferreira, Artemisa Fernanda Moura; Perez, Flávia Maria de Moraes Ramos; Limeira Júnior, Francisco de Assis; de Moura, Mirella de Fátima Liberato; de Sousa, Frederico Barbosa

    2016-05-01

    To test the hypothesis that changes in enamel component volumes (mineral, organic, and water volumes, and permeability) are graded from outer to inner enamel after a short bleaching procedure. Extracted unerupted human third molars had half of their crowns bleached (single bleaching session, 3 × 15 min), and tooth shade changes in bleached parts were analyzed with a spectrophotometer. Ground sections were prepared, component volumes and permeability were quantified at histological points located at varying distances from the enamel surface (n=10 points/location), representing conditions before and after bleaching. Tooth shade changes were significant (pvolume (in decreasing order of relevance: mineral loss, organic gain, water gain, and decrease in permeability) with the set of distances from the enamel surface (graded from the enamel surface inward) (canonical R(2)=0.97; p99%). Changes in enamel composition after a short bleaching procedure followed a gradient within component volumes (mineral loss>organic gain>water gain>decrease in permeability) and decreased from the enamel surface inward. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Proteomic analysis of bleached and unbleached Acropora palmata, a threatened coral species of the Caribbean.

    Science.gov (United States)

    Ricaurte, Martha; Schizas, Nikolaos V; Ciborowski, Pawel; Boukli, Nawal M

    2016-06-15

    There has been an increase in the scale and frequency of coral bleaching around the world due mainly to changes in sea temperature. This may occur at large scales, often resulting in significant decline in coral coverage. In order to understand the molecular and cellular basis of the ever-increasing incidence of coral bleaching, we have undertaken a comparative proteomic approach with the endangered Caribbean coral Acropora palmata. Using a proteomic tandem mass spectrometry approach, we identified 285 and 321 expressed protein signatures in bleached and unbleached A. palmata colonies, respectively, in southwestern Puerto Rico. Overall the expression level of 38 key proteins was significantly different between bleached and unbleached corals. A wide range of proteins was detected and categorized, including transcription factors involved mainly in heat stress/UV responses, immunity, apoptosis, biomineralization, the cytoskeleton, and endo-exophagocytosis. The results suggest that for bleached A. palmata, there was an induced differential protein expression response compared with those colonies that did not bleach under the same environmental conditions. Published by Elsevier Ltd.

  12. Transcriptomic responses to darkness stress point to common coral bleaching mechanisms

    Science.gov (United States)

    Desalvo, M. K.; Estrada, A.; Sunagawa, S.; Medina, Mónica

    2012-03-01

    Coral bleaching occurs in response to numerous abiotic stressors, the ecologically most relevant of which is hyperthermic stress due to increasing seawater temperatures. Bleaching events can span large geographic areas and are currently a salient threat to coral reefs worldwide. Much effort has been focused on understanding the molecular and cellular events underlying bleaching, and these studies have mainly utilized heat and light stress regimes. In an effort to determine whether different stressors share common bleaching mechanisms, we used complementary DNA (cDNA) microarrays for the corals Acropora palmata and Montastraea faveolata (containing >10,000 features) to measure differential gene expression during darkness stress. Our results reveal a striking transcriptomic response to darkness in A. palmata involving chaperone and antioxidant up-regulation, growth arrest, and metabolic modifications. As these responses were previously measured during thermal stress, our results suggest that different stressors may share common bleaching mechanisms. Furthermore, our results point to hypoxia and endoplasmic reticulum stress as critical cellular events involved in molecular bleaching mechanisms. On the other hand, we identified a meager transcriptomic response to darkness in M. faveolata where gene expression differences between host colonies and sampling locations were greater than differences between control and stressed fragments. This and previous coral microarray studies reveal the immense range of transcriptomic responses that are possible when studying two coral species that differ greatly in their ecophysiology, thus pointing to the importance of comparative approaches in forecasting how corals will respond to future environmental change.

  13. Patient and environmental service employee satisfaction of using germicidal bleach wipes for patient room cleaning.

    Science.gov (United States)

    Aronhalt, Kimberly C; McManus, James; Orenstein, Robert; Faller, Rebecca; Link, Mary

    2013-01-01

    More healthcare institutions are using bleach products which are sporicidal to reduce Clostridium difficile infection (CDI). There may be patient and employee concerns about the appearance of bleach residue left on surfaces, odors, and respiratory tract irritation. The intervention used bleach wipes for daily and terminal patient room cleaning to reduce transmission of CDI and was implemented on patient care units with a relatively high incidence of CDI. Both patients and Environmental Services (ES) staff were surveyed to assess their satisfaction of the bleach wipe product used during room cleaning. Patients (n = 94) (91%) continued to be very satisfied with how well their rooms were cleaned every day. Bleach wipes were well tolerated by patients (n = 44) (100%) surveyed on the medical units and less tolerated by patients (n = 50) (22%) on the hematology-oncology units. ES staff (6) reported less satisfaction and more respiratory irritation from using the bleach wipes; however, later their satisfaction improved. © 2012 National Association for Healthcare Quality.

  14. A Strategic Framework for Responding to Coral Bleaching Events in a Changing Climate

    Science.gov (United States)

    Maynard, J. A.; Johnson, J. E.; Marshall, P. A.; Eakin, C. M.; Goby, G.; Schuttenberg, H.; Spillman, C. M.

    2009-07-01

    The frequency and severity of mass coral bleaching events are predicted to increase as sea temperatures continue to warm under a global regime of rising ocean temperatures. Bleaching events can be disastrous for coral reef ecosystems and, given the number of other stressors to reefs that result from human activities, there is widespread concern about their future. This article provides a strategic framework from the Great Barrier Reef to prepare for and respond to mass bleaching events. The framework presented has two main inter-related components: an early warning system and assessment and monitoring. Both include the need to proactively and consistently communicate information on environmental conditions and the level of bleaching severity to senior decision-makers, stakeholders, and the public. Managers, being the most timely and credible source of information on bleaching events, can facilitate the implementation of strategies that can give reefs the best chance to recover from bleaching and to withstand future disturbances. The proposed framework is readily transferable to other coral reef regions, and can easily be adapted by managers to local financial, technical, and human resources.

  15. Study of the hydrogen peroxide bleaching agent effects on bovine enamel using X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Ruda F.; Calazans, Fernanda S.; Miranda, Mauro S.; Santos, Ramon S.; Anjos, Marcelino J.; Assis, Joaquim T. [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Hydrogen Peroxide's a bleaching agent capable of oxidizing a wide range of colored organic, causing discoloration and hence bleaching of the substrate, but some authors related the occurrence of side effects related to bleaching of the tooth structure, such as changes in morphology superficial. It was used 6 bovine incisors, each tooth was initially evaluated six times in different areas to obtain the count of elements phosphorus and calcium using X-Ray Fluorescence. The teeth were randomly divided in two groups: both groups were submitted to bleaching in office with hydrogen peroxide 38%, once a week during three weeks. Group 1 was stored in distilled water and group 2 in artificial saliva, between the sessions. The measurements were repeated every seven days before the bleaching treatment. Besides that, changes in mineral levels were always assessed in the same area and using the same procedure. It was observed that the bleaching was not able to demineralize the tooth enamel studied. (author)

  16. Clareamento gengival: ensino e etnocentrismo Gingival bleaching: teaching and ethnocentrism

    Directory of Open Access Journals (Sweden)

    Edson Daruich Bolla

    2010-06-01

    Full Text Available O estudo objetivou identificar os padrões de estética bucal/gengival subjacentes à formação e prática profissional do cirurgião-dentista, na perspectiva do etnocentrismo. A partir da análise documental e da realização de entrevistas (semiestruturadas com cirurgiões dentistas formados há dez ou mais anos, o estudo recorreu a uma abordagem qualitativa, ancorada na análise temática. No âmbito do ensino da periodontia, o estudo evidenciou que a presença da pigmentação fisiológica é omitida ou tratada como uma alteração de normalidade e/ou antiestética. Todos os entrevistados aprenderam a realizar o clareamento gengival em nível de pós-graduação, sendo estimulados a ofertar tal procedimento em nome de um sorriso saudável e bonito. Diante da supervalorização da eficiência da técnica, ressalta a ausência da discussão da questão estética na perspectiva étnica. Parece que a oferta do clareamento gengival se faz norteada pelo padrão branco de beleza, evidenciando o caráter etnocêntrico do procedimento.The aim of this study was to identify buccal/gingival cosmetic dentistry patterns subjacent to formation and professional practice of the dental surgeon from the ethnocentrism point of view. This is an exploratory study with a qualitative approach based on the thematic analysis. Initially a documental analysis was carried out. Thereafter, dental surgeons were interviewed and semi-structured questions were applied. In the Periodontal teaching field, this study showed that the presence of racial melanosis is omitted or treated as an alteration in the normality patterns and it is considered anti-aesthetic. All the interviewers learnt how to practice gingival bleaching in the post-graduation courses, they were all encouraged to offer this cosmetic dentistry procedure with the opportunity of obtaining a beautiful and healthy smile, thus assuring the belief of the Caucasian racial aesthetic superiority. This study make us

  17. Bio-ethanol

    DEFF Research Database (Denmark)

    Wenzel, Henrik

    2007-01-01

    30% of the fossil fuel consumption, and including economic aspects it is much less. Moreover, an economic analysis shows that biomass will not be able compete in a liberal fuel market, i.e. we will need to subsidise it in one way or the other - and money is a limited resource as well. Therefore......, there is not enough biomass for 'everyone', not physically and not in terms of money to promote its use. This leads to the conclusion that any use of biomass for energy purposes will have to compare to the lost opportunity of using it for something else. In this perspective, the choice to use biomass for bio......, but they do not improve the energy balance enough for bio-ethanol to compete with alternative uses of the biomass. When using biomass to substitute fossil fuels in heat & power production, a close to 100% substitution efficiency is achieved. The best alternative for CO2 reduction and oil saving is, therefore...

  18. Bio energy in Norway

    International Nuclear Information System (INIS)

    Hamnaberg, Haavard; Sidelnikova, Maria

    2011-01-01

    The main conclusion in this report is that it is possible to make available about 14 TWh bio energy in Norway than what is used today to a charge that is located less than ca. 30 oere / kWh. Almost all this potential come from the forest and requires an increase in output up to the net sustained yield. Further 5 TWh may be available in the form of biogas at a cost that is both higher and have greater uncertainty than the fixed bio energy. It is set up a cost curve based on this work, which is quoted here. This reflects only the technical costs, and does not regard wages, commissions, taxes or fees. The value of alternative uses of biomass are not considered. The cost curve must therefore not be mixed with a supply curve. (eb)

  19. A method for defleshing human remains using household bleach.

    Science.gov (United States)

    Mann, Robert W; Berryman, Hugh E

    2012-03-01

    Medical examiners and forensic anthropologists are often faced with the difficult task of removing soft tissue from the human skeleton without damaging the bones, teeth and, in some cases, cartilage. While there are a number of acceptable methods that can be used to remove soft tissue including macerating in water, simmering or boiling, soaking in ammonia, removing with scissors, knife, scalpel or stiff brush, and dermestid beetles, each has its drawback in time, safety, or potential to damage bone. This technical report using the chest plate of a stabbing victim presents a safe and effective alternative method for removing soft tissue from human remains, in particular the chest plate, following autopsy, without damaging or separating the ribs, sternum, and costal cartilage. This method can be used to reveal subtle blunt force trauma to bone, slicing and stabbing injuries, and other forms of trauma obscured by overlying soft tissue. Despite the published cautionary notes, when done properly household bleach (3-6% sodium hypochlorite) is a quick, safe, and effective method for examining cartilage and exposing skeletal trauma by removing soft tissue from human skeletal remains. 2011 American Academy of Forensic Sciences. Published 2011. This article is a U.S. Government work and is in the public domain in the U.S.A.

  20. Biological and advanced treatment of sulfate pulp bleaching effluents

    International Nuclear Information System (INIS)

    Çeçen, F.; Urban, W.; Haberl, R.

    1992-01-01

    Spent bleaching effluents (from chlorination (C) and extraction (E) stages) of a sulfate pulp mill were subjected to bench-scale biological and advanced treatment. Although > 90 % of the influent BOD 5 could be removed in an activated sludge process, the effluent still contained high amounts of resistant substances. The maximum COD removal was about 50 %; the removal rates achieved in the parameters TOC, DOC, AOX, SAK (254 nm) were even lower. The biological treatment led to an increase in color (436 nm) up to 40 %. The biologically pretreated effluent was further treated by ozone or ozone/irradiation. The DOC, COD, color (436 nm), SAK (254 nm) and AOX removal rates amounted to 61 %, 81 %, 98 %, 92 % and 92 %, respectively. These methods led simultaneously to an increase in biological biodegradability as reflected by an increase in BOD 5 . A comparison of the results obtained for raw and biologically pretreated wastewaters showed that biodegradable substances should first be removed from the wastewater since otherwise the effectiveness of these methods decreased. The coagulation/flocculation of biologically pretreated effluent showed that FeCl3 was the most effective coagulant and that removal rates > 90 % could be achieved. The treatment with various powder activated carbons showed that a dosage of 10 g/l was required to achieve elimination rates > 90 % in the parameters DOC, COD, color (436 nm) and SAK (254 nm). Adsorption isotherms were developed for every activated carbon and adsorption constants were calculated. (author)

  1. Resilience and climate change: lessons from coral reefs and bleaching in the Western Indian Ocean

    Science.gov (United States)

    Obura, David O.

    2005-05-01

    The impact of climate change through thermal stress-related coral bleaching on coral reefs of the Western Indian Ocean has been well documented and is caused by rising sea water temperatures associated with background warming trends and extreme climate events. Recent studies have identified a number of factors that may reduce the impact of coral bleaching and mortality at a reef or sub-reef level. However, there is little scientific consensus as yet, and it is unclear how well current science supports the immediate needs of management responses to climate change. This paper provides evidence from the Western Indian Ocean in support of recent hypotheses on coral and reef vulnerability to thermal stress that have been loosely termed 'resistance and resilience to bleaching'. The paper argues for a more explicit definition of terms, and identifies three concepts affecting coral-zooxanthellae holobiont and reef vulnerability to thermal stress previously termed 'resistance to bleaching': 'thermal protection', where some reefs are protected from the thermal conditions that induce bleaching and/or where local physical conditions reduce bleaching and mortality levels; 'thermal resistance', where individual corals bleach to differing degrees to the same thermal stress; and 'thermal tolerance', where individual corals suffer differing levels of mortality when exposed to the same thermal stress. 'Resilience to bleaching' is a special case of ecological resilience, where recovery following large-scale bleaching mortality varies according to ecological and other processes. These concepts apply across multiple levels of biological organization and temporal and spatial scales. Thermal resistance and tolerance are genetic properties and may interact with environmental protection properties resulting in phenotypic variation in bleaching and mortality of corals. The presence or absence of human threats and varying levels of reef management may alter the influence of the above factors

  2. Biotechnology. Part 1: Historical aspects. Part 2: Microbiological engineering. Part 3: Enzymatic engineering. Part 4: Genetical engineering. Part 5: Quality control in biological industry. Part 6: Bio technologies in France and in the world; Biotechnologie. Partie 1: Historique. Partie 2: Le genie microbiologique. Partie 3: Le genie enzymatique. Partie 4: Le genie genetique. Partie 5: Controle qualite en bio-industrie. Partie 6: Les biotechnologies en France et dans le monde

    Energy Technology Data Exchange (ETDEWEB)

    Bouquet, J. [Lycee de Lille, 59 (France); Arnaud, A.; Galzy, P. [Ecole Nationale Superieure Agronomie de Montpellier, 34 (France); Guiraud, J.P. [Montpellier-2 Universite, 34 (France). Institut Superieur Ingenieurs de Montpellier; Leveau, J.Y.; Bouix, M.; Berset, C.; Goursaud, J.; Cuvelier, G.F. [Ecole Nationale Superieure des Industries Agricoles et Alimentaires, 91 - Massy (France); Engasser, J.M. [Institut Polytechnique de Lorraine, 54 - Vandoeuvre-les-Nancy (France); Cerisier, Y. [CNCM Institut Pasteur, 75 - Paris (France); Richard, H. [Ecole Nationale Superieure des Industries Agricoles et Alimentaires, 91 - Massy (France). Laboratoire de Chimie des Substances Naturelles; Scriban, R. [Ecole Nationale Superieure des Industries Alimentaires, 59 - Douai (France); Teoule, E. [Paris-6 Universite, 75 (France). Laboratoire Station de Genetique et d`Amelioration des Plantes; Martal, J. [INRA, 78 - Jouy-en-Josas (France); Mawas, C. [INSERM, Cancerologie et Therapeutique experimentales, 13 - Marseille (France); Pourquie, J. [Institut National Agronomique, 75 - Paris (France); Vandecasteele, J.P. [Institut Francais du Petrole, 92 - Rueil-Malmaison (France); Iwema, A. [Agence de l`eau Rhone-Mediterranee-Corse, 69 - Pierre-Benite (France); Lebeault, J.M. [Compiegne Universite, Centre de Recherche de Royalieu, 60 (France); Steenbrugge, H. [Gaz de France, 59 - Lille (France); Pierrard, S. [Veterinaire Inspecteur, 70 - Vesoul (France); Normand-Plessier, F. [Elf Sanofi, 94 - Gentilly (France); Raugel, P.J. [Economiste International, 94 - Ivry-sur-Seine (France); Guerrini, M.; Jupin, C. [Institut National de la Propriete Industrielle, 75 - Paris (France); Thomas, D. [Compiegne Universite Technologique, 60 (France)]|[Ecole Pratique des Hautes Etudes URA,CNRS, 60 - Compiegne (France); Nettancourt, D. de [Commission des Communautes Europeenes, Bruxelles (Belgium)

    1993-12-31

    The fourth edition of the book ``biotechnology`` has just been published. It keeps the general frame of the previous editions while adding the analysis of new areas such as the animal world, the environment, the question of patentability, the standards and regulations, the stake of research and formation in the CEE, the importance of the scientific research for the reciprocal understanding of bio technologies and environmental problems, the respect of the biological variety.. Among the treated subjects, those particularly interesting for the ETDE database are the waste waters and industrial wastes and the natural gas. Didactic guide particularly well documented by a valuable bibliography, this work is an indispensable tool for teacher-searcher, students and engineers. (O.M.) 1113 refs.

  3. Panorama 2007: New Bio-fuel Technologies

    International Nuclear Information System (INIS)

    His, St.

    2007-01-01

    New pathways are emerging in the wake of the boom in the biofuels market. Their development is driven by the search for improved product quality and a broader range of natural plant feedstock. Interested in these new pathways, the oil companies are seeking to differentiate themselves on a market that promises to be very competitive in future. This is a turning point in a sector that has historically been dominated by agro-food companies. (author)

  4. Nearshore Turbid-Zone Corals Exhibit High Bleaching Tolerance on the Great Barrier Reef Following the 2016 Ocean Warming Event

    OpenAIRE

    Morgan, Kyle M.; Perry, Chris T.; Johnson, Jamie A.; Smithers, Scott G.

    2017-01-01

    High sea surface temperatures (SSTs) on the Great Barrier Reef (GBR) during summer 2015/2016 caused extensive coral bleaching, with aerial and in-water surveys confirming high (but variable) bleaching-related coral mortality. In contrast, bleaching impacts on nearshore turbid-zone reefs, traditionally considered more “marginal” coral habitats, remain poorly documented. This is because rapid ecological surveys are difficult in these turbid water settings, and baseline coral community data from...

  5. Cell death and degeneration in the symbiotic\\ud dinoflagellates of the coral Stylophora pistillata\\ud during bleaching

    OpenAIRE

    Franklin, Daniel J.; Hoegh-Guldberg, O.; Jones, R.J.; Berges , John A.

    2004-01-01

    Rising sea temperatures are increasing the incidences of mass coral bleaching (the dissociation\\ud of the coral–algal symbiosis) and coral mortality. In this study, the effects of bleaching\\ud (induced by elevated light and temperature) on the condition of symbiotic dinoflagellates (Symbiodinium\\ud sp.) within the tissue of the hard coral Stylophora pistillata (Esper) were assessed using a suite\\ud of techniques. Bleaching of S. pistillata was accompanied by declines in the maximum potential\\...

  6. BIOS Security Analysis and a Kind of Trusted BIOS

    Science.gov (United States)

    Zhou, Zhenliu; Xu, Rongsheng

    The BIOS's security threats to computer system are analyzed and security requirements for firmware BIOS are summarized in this paper. Through discussion about TCG's trust transitivity, a new approach about CRTM implementation based on BIOS is developed. In this paper, we also put forward a new trusted BIOS architecture-UTBIOS which is built on Intel Framework for EFI/UEFI. The trustworthiness of UTBIOS is based on trusted hardware TPM. In UTBIOS, trust encapsulation and trust measurement are used to construct pre-OS trust chain. Performance of trust measurement is also analyzed in the end.

  7. Massive hard coral loss after a severe bleaching event in 2010 at Los Roques, Venezuela

    Directory of Open Access Journals (Sweden)

    Carolina Bastidas

    2012-03-01

    Full Text Available Thermal anomalies have become more severe, frequent and well-documented across the Caribbean for the past 30 years. This increase in temperature has caused coral bleaching resulting in reef decline. At Los Roques National Park, Venezuela, temperature has been monitored at four reef sites. In mid-September 2010, seawater temperature reached 30.85°C at 5 m depth in Los Roques, an archipelago only slightly affected by previous bleaching events. For example, bleaching in Los Roques in 2005 was mild compared to the rest of the Caribbean and to the results in this study. In 2010, seawater temperatures remained above 29.0°C from mid-August until the first week of November, resulting in +16 Degree Heating Weeks by that time. Our annual survey of four reef sites indicated that 72% of 563 scleractinian colonies were partial or totally bleached (white or pale (discolored in October 2010. In February 2011, there were still 46% of coral colonies affected; but most of them were pale and only 2% were bleached. By February, coral cover had declined 4 to 30% per transect, with a mean of 14.3%. Thus, mean coral cover dropped significantly from 45 to 31% cover (a 34% reduction. In addition to bleaching, corals showed a high prevalence (up to 16% of black band disease in October 2010 and of white plague (11% in February 2011. As a consequence, coral mortality is expected to be larger than reported here. Reef surveys since 2002 and personal observations for more than 20 years indicated that this bleaching event and its consequences in Los Roques have no precedent. Our results suggest that reef sites with no previous record of significant deterioration are more likely to become affected by thermal anomalies. However, this archipelago is relatively unaffected by local anthropogenic disturbance and has a high coral recruitment, which may contribute to its recovery

  8. Effects of modeled tropical sea surface temperature variability on coral reef bleaching predictions

    Science.gov (United States)

    van Hooidonk, R.; Huber, M.

    2012-03-01

    Future widespread coral bleaching and subsequent mortality has been projected using sea surface temperature (SST) data derived from global, coupled ocean-atmosphere general circulation models (GCMs). While these models possess fidelity in reproducing many aspects of climate, they vary in their ability to correctly capture such parameters as the tropical ocean seasonal cycle and El Niño Southern Oscillation (ENSO) variability. Such weaknesses most likely reduce the accuracy of predicting coral bleaching, but little attention has been paid to the important issue of understanding potential errors and biases, the interaction of these biases with trends, and their propagation in predictions. To analyze the relative importance of various types of model errors and biases in predicting coral bleaching, various intra- and inter-annual frequency bands of observed SSTs were replaced with those frequencies from 24 GCMs 20th century simulations included in the Intergovernmental Panel on Climate Change (IPCC) 4th assessment report. Subsequent thermal stress was calculated and predictions of bleaching were made. These predictions were compared with observations of coral bleaching in the period 1982-2007 to calculate accuracy using an objective measure of forecast quality, the Peirce skill score (PSS). Major findings are that: (1) predictions are most sensitive to the seasonal cycle and inter-annual variability in the ENSO 24-60 months frequency band and (2) because models tend to understate the seasonal cycle at reef locations, they systematically underestimate future bleaching. The methodology we describe can be used to improve the accuracy of bleaching predictions by characterizing the errors and uncertainties involved in the predictions.

  9. Opposite latitudinal gradients in projected ocean acidification and bleaching impacts on coral reefs.

    Science.gov (United States)

    van Hooidonk, Ruben; Maynard, Jeffrey Allen; Manzello, Derek; Planes, Serge

    2014-01-01

    Coral reefs and the services they provide are seriously threatened by ocean acidification and climate change impacts like coral bleaching. Here, we present updated global projections for these key threats to coral reefs based on ensembles of IPCC AR5 climate models using the new Representative Concentration Pathway (RCP) experiments. For all tropical reef locations, we project absolute and percentage changes in aragonite saturation state (Ωarag) for the period between 2006 and the onset of annual severe bleaching (thermal stress >8 degree heating weeks); a point at which it is difficult to believe reefs can persist as we know them. Severe annual bleaching is projected to start 10-15 years later at high-latitude reefs than for reefs in low latitudes under RCP8.5. In these 10-15 years, Ωarag keeps declining and thus any benefits for high-latitude reefs of later onset of annual bleaching may be negated by the effects of acidification. There are no long-term refugia from the effects of both acidification and bleaching. Of all reef locations, 90% are projected to experience severe bleaching annually by 2055. Furthermore, 5% declines in calcification are projected for all reef locations by 2034 under RCP8.5, assuming a 15% decline in calcification per unit of Ωarag. Drastic emissions cuts, such as those represented by RCP6.0, result in an average year for the onset of annual severe bleaching that is ~20 years later (2062 vs. 2044). However, global emissions are tracking above the current worst-case scenario devised by the scientific community, as has happened in previous generations of emission scenarios. The projections here for conditions on coral reefs are dire, but provide the most up-to-date assessment of what the changing climate and ocean acidification mean for the persistence of coral reefs. © 2013 John Wiley & Sons Ltd.

  10. Effect of bleaching on mercury release from amalgam fillings and antioxidant enzyme activities: a pilot study.

    Science.gov (United States)

    Cakir, Filiz Yalcin; Ergin, Esra; Gurgan, Sevil; Sabuncuoglu, Suna; Arpa, Cigdem Sahin; Tokgoz, İlknur; Ozgunes, Hilal; Kiremitci, Arlin

    2015-01-01

    The aim of this pilot clinical study was to determine the mercury release from amalgam fillings and antioxidant enzyme activities (Superoxide Dismutase [SOD] and Catalase[CAT] ) in body fluids after exposure to two different vital tooth bleaching systems. Twenty eight subjects with an average age of 25.6 years (18-41) having at least two but not more than four Class II amalgam fillings on each quadrant arch in the mouth participated in the study. Baseline concentrations of mercury levels in whole blood, urine, and saliva were measured by a Vapor Generation Accessory connected to an Atomic Absorption Spectrometer. Erythrocyte enzymes, SOD, and CAT activities in blood were determined kinetically. Subjects were randomly assigned to two groups of 14 volunteers. Group 1 was treated with an at-home bleaching system (Opalescence PF 35% Carbamide Peroxide, Ultradent), and Group 2 was treated with a chemically activated office bleaching system (Opalescence Xtra Boost 38% Hydrogen Peroxide, Ultradent) according to the manufacturer's recommendations. Twenty-four hours after bleaching treatments, concentrations of mercury and enzymes were remeasured. There were no significant differences on mercury levels in blood, urine, and saliva before and after bleaching treatments (p > 0.05). No differences were also found in the level of antioxidant enzyme activities (SOD and CAT) before and after treatments (p > 0.05). Mercury release did not affect the enzyme activities (p > 0.05). Bleaching treatments either office or home did not affect the amount of mercury released from amalgam fillings in blood, urine, and saliva and the antioxidant-enzyme activities in blood. Bleaching treatments with the systems tested in this pilot study have no deleterious effect on the mercury release from amalgam fillings and antioxidant enzymes in body fluids. © 2014 Wiley Periodicals, Inc.

  11. Surviving coral bleaching events: porites growth anomalies on the Great Barrier Reef.

    Science.gov (United States)

    Cantin, Neal E; Lough, Janice M

    2014-01-01

    Mass coral bleaching affected large parts of the Great Barrier Reef (GBR) in 1998 and 2002. In this study, we assessed if signatures of these major thermal stress events were recorded in the growth characteristics of massive Porites colonies. In 2005 a suite of short (reefs in the central GBR (18-19°S) that have documented observations of widespread bleaching. Sites included inshore (Nelly Bay, Pandora Reef), annually affected by freshwater flood events, midshelf (Rib Reef), only occasionally affected by freshwater floods and offshore (Myrmidon Reef) locations primarily exposed to open ocean conditions. Annual growth characteristics (extension, density and calcification) were measured in 144 cores from 79 coral colonies and analysed over the common 24-year period, 1980-2003. Visual examination of the annual density bands revealed growth hiatuses associated with the bleaching years in the form of abrupt decreases in annual linear extension rates, high density stress bands and partial mortality. The 1998 mass-bleaching event reduced Porites calcification by 13 and 18% on the two inshore locations for 4 years, followed by recovery to baseline calcification rates in 2002. Evidence of partial mortality was apparent in 10% of the offshore colonies in 2002; however no significant effects of the bleaching events were evident in the calcification rates at the mid shelf and offshore sites. These results highlight the spatial variation of mass bleaching events and that all reef locations within the GBR were not equally stressed by the 1998 and 2002 mass bleaching events, as some models tend to suggest, which enabled recovery of calcification on the GBR within 4 years. The dynamics in annual calcification rates and recovery displayed here should be used to improve model outputs that project how coral calcification will respond to ongoing warming of the tropical oceans.

  12. Surviving coral bleaching events: porites growth anomalies on the Great Barrier Reef.

    Directory of Open Access Journals (Sweden)

    Neal E Cantin

    Full Text Available Mass coral bleaching affected large parts of the Great Barrier Reef (GBR in 1998 and 2002. In this study, we assessed if signatures of these major thermal stress events were recorded in the growth characteristics of massive Porites colonies. In 2005 a suite of short (<50 cm cores were collected from apparently healthy, surviving Porites colonies, from reefs in the central GBR (18-19°S that have documented observations of widespread bleaching. Sites included inshore (Nelly Bay, Pandora Reef, annually affected by freshwater flood events, midshelf (Rib Reef, only occasionally affected by freshwater floods and offshore (Myrmidon Reef locations primarily exposed to open ocean conditions. Annual growth characteristics (extension, density and calcification were measured in 144 cores from 79 coral colonies and analysed over the common 24-year period, 1980-2003. Visual examination of the annual density bands revealed growth hiatuses associated with the bleaching years in the form of abrupt decreases in annual linear extension rates, high density stress bands and partial mortality. The 1998 mass-bleaching event reduced Porites calcification by 13 and 18% on the two inshore locations for 4 years, followed by recovery to baseline calcification rates in 2002. Evidence of partial mortality was apparent in 10% of the offshore colonies in 2002; however no significant effects of the bleaching events were evident in the calcification rates at the mid shelf and offshore sites. These results highlight the spatial variation of mass bleaching events and that all reef locations within the GBR were not equally stressed by the 1998 and 2002 mass bleaching events, as some models tend to suggest, which enabled recovery of calcification on the GBR within 4 years. The dynamics in annual calcification rates and recovery displayed here should be used to improve model outputs that project how coral calcification will respond to ongoing warming of the tropical oceans.

  13. Bleaching and mortality of reef organisms during a warming event in 1995 on the Caribbean coast of Costa Rica

    OpenAIRE

    Jiménez, Carlos

    2016-01-01

    Coral reefs at the Caribbean coast of Costa Rica were affected during a bleaching event associated with the 1995 warming of the Western Caribbean. During doldrum weather in late August 1995, reef organisms at Parque Nacional Cahuita were 62% and 7.4% bleached and dead respectively, whilst 67.6% bleached and 8.2% died in the Refugio Nacional de Vida Silvestre Gandoca-Manzanillo. However, Cahuita had the highest mean number of bleached (257 ± 51.1) and dead (30.5 ± 5.6) colonies in the surveyed...

  14. Effects of the Ratio between Pigment and Bleaching Gel on the Fracture Resistance and Dentin Microhardness of endodontically treated Teeth.

    Science.gov (United States)

    Galloza, Marina Og; Jordão-Basso, Keren Cf; Bandeca, Matheus C; Costa, Samuel O; Borges, Alvaro H; Tonetto, Mateus R; Tirintan, Fabio C; Keine, Kátia C; Kuga, Milton C

    2017-11-01

    The aim of this study was to evaluate the effects of bleaching gel using 35% hydrogen peroxide (HP), associated with red carmine pigment (RC), in the 3:1 or 1:1 ratio, on fracture resistance and dentin microhardness of endodontically treated teeth. A total of 40 lower incisors were endodontically treated and divided into four groups (n = 10), according to the bleaching protocol: G1 (HP3), 35% HP + RC (3:1); G2 (HP1), 35% HP + RC (1:1); G3 (positive), 38% HP; and G4 (negative), unbleached. Four dental bleaching sessions were performed. The dental crowns were restored after the last session and submitted to the fracture resistance test. Totally, 60 specimens from the endodontically treated lower incisor crowns were prepared to evaluate the effects on dentin microhardness. The analysis was measured (in Knoop) prior to and after the last dental bleaching session using similar bleaching protocols. G2 presented the lowest fracture resistance (p 0.05). No difference was observed in the reduction of dentin microhardness among the groups (p > 0.05). A 1:1 ratio (bleaching gel:pigment) caused a significant fracture resistance reduction in relation to the other protocols. No effect on the dentin microhardness reduction was observed. The pigment addition to the bleaching agent accelerates the bleaching chemical reaction. However, no studies have evaluated the ideal proportion to optimize tooth bleaching.

  15. Application of TAED/H2O2 system for low temperature bleaching of crude cellulose extracted from jute fiber

    Science.gov (United States)

    Wen, Zuoqiang; Zou, Linbo; Wang, Weiming

    2018-03-01

    Tetraacetylethylenediamine (TAED) activated hydrogen peroxide system had been applied for bleaching of crude cellulose extracted from jute fiber. Comparing with conventional hydrogen peroxide bleaching system, those results showed that bleaching temperature and time could be effectively reduced, and a preferable whiteness could be produced under faint alkaline condition. And the optimum conditions for activated bleaching system could be summarized as molar ratio of H2O2/TAED 1:0.7, pH 8, pure hydrogen peroxide 0.09 mol/L, temperature 70 °C and time 60min.

  16. In vitro evaluation of the chemical and morphological changes of the enamel surface using different bleaching techniques

    International Nuclear Information System (INIS)

    Mattos, Alessandra de Siervi

    2003-01-01

    'In vitro' evaluation through MEV and EDS of the morphological and chemical changes, respectively, of the bovine enamel, submitted to different bleaching techniques. For the MEV evaluation eighteen apical thirds were pigmented and divided into two parts. One half of each sample was the control and the other half was bleached according to the protocol of each test group (n= 6). Group I - home bleaching with a 10% carbamide peroxide; group II bleaching with 35% hydrogen peroxide and LED; group III - bleaching with 35% hydrogen peroxide with diode laser bleaching. The same procedure was done with the eighteen samples which were analyzed through EDS and which had their buccal surface grinded and polished before the bleaching procedure in order to obtain more precise values of the fraction of calcium and phosphorus. The results showed no morphological changes among the analyzed control halves and the bleached halves. There was not a statistical significant difference about Ca and P values, among the control halves and the bleached halves regarding the chemical components (p< 0,05). (author)

  17. Envirobiosens. New trends in bio-sensing for environmental applications

    Energy Technology Data Exchange (ETDEWEB)

    Alcock, S. [Cranfield Biothechnology Centre, Cranfield University (United Kingdom); Cosnier, S. [Universite Joseph-Fourier, Grenoble I, Lab. d' Electrochimie Organique et de Photochimie Redox, UMR CNRS 5630, 38 (France); Magner, E. [Limerick University, Dept. of Chemical and Environmental Sciences (Ireland)] [and others

    2000-07-01

    The development of useful sensor systems to monitor multiple pollutants is needed for many environmental applications like the pollution monitoring and processing. The advantages of chemical sensors, bio-sensors and bio-mimetic systems should be exploited to fill specific niche applications in environmental engineering. Sensors offer particular advantages as they can be used for rapid field assessment of pollution risks, including the effects of pollutant mixtures. This conference reviews the current state of the art for bio-sensors operating in the environment and in environmental processes to develop bio-sensors practical applications in the environmental technology. The papers are presented in three parts: enzymatic sensors for environmental monitoring; affinity sensors for environmental application; cell and tissue sensors for environmental analysis, future prospects. (A.L.B.)

  18. Liquid Bio fuels: Vegetable Oils and Bi oethanol

    International Nuclear Information System (INIS)

    Ballesteros, M.; Ballesteros, I.; Oliva, J. M.; Navarro, A. A.

    1998-01-01

    The European energy policy has defined clear objectives to reduce the high dependency on fossil petroleum imports, and to increase the security of sustainable energy supply for the transport sector. Moreover, the European environmental policy is requesting clean fuels that reduce environmental risks. Liquid Bio fuels (vegetable oils and bio ethanol) appear to be in a good position to contribute to achieve these goals expressed by the established objective of European Union to reach for bio fuels a market share of 5% of motor vehicle consumption. This work presents the current state and perspectives of the production and utilisation of liquid fuels from agricultural sources by reviewing agricultural feedstocks for energy sector, conversion technologies and different ways to use bio fuels. Environmental and economical aspects are also briefly analysed. (Author) 10 refs

  19. Fiscal 1993 technological survey report. R and D project for industrial science and technology (Assignment by NEDO/R and D of biochip - survey on biological research of biochip); 1993 nendo bio soshi no kenkyu kaihatsu seika hokokusho. Bio soshi seibutsu kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-04-01

    As a part of the R and D of a biochip, for the purpose of establishing fundamental technology in connection with a biochip having a new function that is nonexistent in a semiconductor, a committee for biological research and survey of biochip was organized, operating research activities, surveying and compiling research situations and technological trend at the forefront of each field, in regard to information processing in the biological field, brain-memory related information processing in the medical field, and biologically simulated information processing in the engineering field. The results were summarized in the following seven areas. 1. neurology of memory, 2. the frontal lobe and recognition, 3. function of the olfactory lobe and neural connection between the olfactory lobe and the hippocampus, 4. the cerebral fundus nucleus and function, 5. coordinate change from vision to motion in the brain, and 6. control of transient potassium current by the astroglia cell in the mouth and the hippocampus cultured nerve cell. (NEDO)

  20. Rethinking Value in the Bio-economy

    Science.gov (United States)

    2016-01-01

    Current debates in science and technology studies emphasize that the bio-economy—or, the articulation of capitalism and biotechnology—is built on notions of commodity production, commodification, and materiality, emphasizing that it is possible to derive value from body parts, molecular and cellular tissues, biological processes, and so on. What is missing from these perspectives, however, is consideration of the political-economic actors, knowledges, and practices involved in the creation and management of value. As part of a rethinking of value in the bio-economy, this article analyzes three key political-economic processes: financialization, capitalization, and assetization. In doing so, it argues that value is managed as part of a series of valuation practices, it is not inherent in biological materialities. PMID:28458406

  1. Preparation and Characterization of Cellulose Nanocrystals from the Bio-ethanol Residuals

    Directory of Open Access Journals (Sweden)

    Lanxing Du

    2017-02-01

    Full Text Available This study was to explore the conversion of low-cost bio-residuals into high value-added cellulose nanocrystals. Two enzymatic hydrolyzed residuals (i.e., HRMMW and HRSPW were collected from two different bio-ethanol producing processes—hydrolyzing medium-milled wood (MMW and hydrolyzing acid sulfite pretreated wood (SPW, respectively. The results showed that both residuals contained over 20 wt % glucan with a crystallinity of about 30%, confirming the existence of cellulose in a well-organized structure in two bio-residuals. The cellulose nanocrystals (CNCs were successfully extracted by first bleaching the hydrolyzed residuals to remove lignin and then hydrolyzing them with sulfuric acid. The resulting CNCs displayed the flow birefringence under two crossed polarizers. Compared with CNCs from microfibrillated cellulose (CNCMCC, HRMMW and its resulted CNC present the smallest particle size and aspect ratio. CNCMCC had the larger particle size, aspect ratio, and higher z-potential value, CNCSPW presented a similar morphology to CNCMCC, and had the largest aspect ratio. The CNCMCC enhanced its high crystallinity to 85.5%. However, CNCMMW and CNCSPW had a better thermal stability and higher activation energy as well as onset temperature and maximum decomposition temperature. As a result, the CNCs from bio-ethanol residuals are valued and promising cellulose nanoparticle resources.

  2. Preparation and Characterization of Cellulose Nanocrystals from the Bio-ethanol Residuals.

    Science.gov (United States)

    Du, Lanxing; Wang, Jinwu; Zhang, Yang; Qi, Chusheng; Wolcott, Michael P; Yu, Zhiming

    2017-02-23

    This study was to explore the conversion of low-cost bio-residuals into high value-added cellulose nanocrystals. Two enzymatic hydrolyzed residuals (i.e., HR MMW and HR SPW ) were collected from two different bio-ethanol producing processes-hydrolyzing medium-milled wood (MMW) and hydrolyzing acid sulfite pretreated wood (SPW), respectively. The results showed that both residuals contained over 20 wt % glucan with a crystallinity of about 30%, confirming the existence of cellulose in a well-organized structure in two bio-residuals. The cellulose nanocrystals (CNCs) were successfully extracted by first bleaching the hydrolyzed residuals to remove lignin and then hydrolyzing them with sulfuric acid. The resulting CNCs displayed the flow birefringence under two crossed polarizers. Compared with CNCs from microfibrillated cellulose (CNC MCC ), HR MMW and its resulted CNC present the smallest particle size and aspect ratio. CNC MCC had the larger particle size, aspect ratio, and higher z-potential value, CNC SPW presented a similar morphology to CNC MCC , and had the largest aspect ratio. The CNC MCC enhanced its high crystallinity to 85.5%. However, CNC MMW and CNC SPW had a better thermal stability and higher activation energy as well as onset temperature and maximum decomposition temperature. As a result, the CNCs from bio-ethanol residuals are valued and promising cellulose nanoparticle resources.

  3. Clinical application of bio ceramics

    International Nuclear Information System (INIS)

    Anu, Sharma; Gayatri, Sharma

    2016-01-01

    Ceramics are the inorganic crystalline material. These are used in various field such as biomedical, electrical, electronics, aerospace, automotive and optical etc. Bio ceramics are the one of the most active areas of research. Bio ceramics are the ceramics which are biocompatible. The unique properties of bio ceramics make them an attractive option for medical applications and offer some potential advantages over other materials. During the past three decades, a number of major advances have been made in the field of bio ceramics. This review focuses on the use of these materials in variety of clinical scenarios.

  4. Mass coral bleaching causes biotic homogenization of reef fish assemblages.

    Science.gov (United States)

    Richardson, Laura E; Graham, Nicholas A J; Pratchett, Morgan S; Eurich, Jacob G; Hoey, Andrew S

    2018-04-06

    Global climate change is altering community composition across many ecosystems due to nonrandom species turnover, typically characterized by the loss of specialist species and increasing similarity of biological communities across spatial scales. As anthropogenic disturbances continue to alter species composition globally, there is a growing need to identify how species responses influence the establishment of distinct assemblages, such that management actions may be appropriately assigned. Here, we use trait-based analyses to compare temporal changes in five complementary indices of reef fish assemblage structure among six taxonomically distinct coral reef habitats exposed to a system-wide thermal stress event. Our results revealed increased taxonomic and functional similarity of previously distinct reef fish assemblages following mass coral bleaching, with changes characterized by subtle, but significant, shifts toward predominance of small-bodied, algal-farming habitat generalists. Furthermore, while the taxonomic or functional richness of fish assemblages did not change across all habitats, an increase in functional originality indicated an overall loss of functional redundancy. We also found that prebleaching coral composition better predicted changes in fish assemblage structure than the magnitude of coral loss. These results emphasize how measures of alpha diversity can mask important changes in the structure and functioning of ecosystems as assemblages reorganize. Our findings also highlight the role of coral species composition in structuring communities and influencing the diversity of responses of reef fishes to disturbance. As new coral species configurations emerge, their desirability will hinge upon the composition of associated species and their capacity to maintain key ecological processes in spite of ongoing disturbances. © 2018 John Wiley & Sons Ltd.

  5. In vitro study of the pulp chamber temperature rise during light-activated bleaching

    Directory of Open Access Journals (Sweden)

    Thaise Graciele Carrasco

    2008-10-01

    Full Text Available This study evaluated in vitro the pulp chamber temperature rise induced by the light-activated dental bleaching technique using different light sources. The root portions of 78 extracted sound human mandibular incisors were sectioned approximately 2 mm below the cementoenamel junction. The root cavities of the crowns were enlarged to facilitate the correct placing of the sensor into the pulp chamber. Half of specimens (n=39 was assigned to receive a 35% hydrogen peroxide gel on the buccal surface and the other halt (n=39 not to receive the bleaching agent. Three groups (n=13 were formed for each condition (bleach or no bleach according to the use of 3 light sources recommended for dental bleaching: a light-emitting diode (LEDlaser system, a LED unit and a conventional halogen light. The light sources were positioned perpendicular to the buccal surface at a distance of 5 mm and activated during 30 s. The differences between the initial and the highest temperature readings for each specimen were obtained, and, from the temperature changes, the means for each specimen and each group were calculated. The values of temperature rise were compared using Kruskal-Wallis test at 1% significance level. Temperature rise varied significantly depending on the light-curing unit, with statistically significant differences (p0.01. When the bleaching agent was applied, there were significant differences among groups (p<0.01: halogen light induced the highest temperature rise (1.41±0.64ºC, and LED-laser system the lowest (0.33±0.12ºC; however, there was no difference between LED-laser system and LED unit (0.44±0.11ºC. LED and LED-laser system did not differ significantly from each other regardless the temperature rise occurred with or without bleaching agent application. It may be concluded that during light-activated tooth bleaching, with or without the bleaching agent, halogen light promoted higher pulp chamber temperature rise than LED unit and LED

  6. Variables and potential models for the bleaching of luminescence signals in fluvial environments

    Science.gov (United States)

    Gray, Harrison J.; Mahan, Shannon

    2015-01-01

    Luminescence dating of fluvial sediments rests on the assumption that sufficient sunlight is available to remove a previously obtained signal in a process deemed bleaching. However, luminescence signals obtained from sediment in the active channels of rivers often contain residual signals. This paper explores and attempts to build theoretical models for the bleaching of luminescence signals in fluvial settings. We present two models, one for sediment transported in an episodic manner, such as flood-driven washes in arid environments, and one for sediment transported in a continuous manner, such as in large continental scale rivers. The episodic flow model assumes that the majority of sediment is bleached while exposed to sunlight at the near surface between flood events and predicts a power-law decay in luminescence signal with downstream transport distance. The continuous flow model is developed by combining the Beer–Lambert law for the attenuation of light through a water column with a general-order kinetics equation to produce an equation with the form of a double negative exponential. The inflection point of this equation is compared with the sediment concentration from a Rouse profile to derive a non-dimensional number capable of assessing the likely extent of bleaching for a given set of luminescence and fluvial parameters. Although these models are theoretically based and not yet necessarily applicable to real-world fluvial systems, we introduce these ideas to stimulate discussion and encourage the development of comprehensive bleaching models with predictive power.

  7. THE EFFECTS OF HOME BLEACHING ON THE HARDNESS OF AMALGAM FILLING

    Directory of Open Access Journals (Sweden)

    Andi Soufyan

    2015-06-01

    Full Text Available Dental bleaching has been considered as a feasible approach for dental esthetic, and many dental bleaching products can be seen in the market. Therefore, the side effect of such dental product should be studied. This study was aimed to determine the effect of carbamide peroxide-containing home bleaching agent on the hardness of dental amalgam surface structure. Forty amalgam filling specimens were divided into 4 groups, which consist of 3 treatment groups and 1 controu group. Each group was exposed to the bleaching agent daily for 2, 4 and 8 hours within 7 days. The Vickers Microhardness Tester, with loads 98.07 mN for 20 seconds, was used to measure the hardness of amalgam surface. It was revealed that, there was a significant difference between the treatment and the control group on 8 hours period. It was concluded that there was a decrease in hardness of dental amalgam surface after having a contact with carbamide peroxide bleaching agent.

  8. Multiple opportunistic pathogens can cause a bleaching disease in the red seaweed Delisea pulchra.

    Science.gov (United States)

    Kumar, Vipra; Zozaya-Valdes, Enrique; Kjelleberg, Staffan; Thomas, Torsten; Egan, Suhelen

    2016-11-01

    While macroalgae (or seaweeds) are increasingly recognized to suffer from disease, in most cases the causative agents are unknown. The model macroalga Delisea pulchra is susceptible to a bleaching disease and previous work has identified two epiphytic bacteria, belonging to the Roseobacter clade, that cause bleaching under laboratory conditions. However, recent environmental surveys have shown that these in vitro pathogens are not abundant in naturally bleached D. pulchra, suggesting the presence of other pathogens capable of causing this algal disease. To test this hypothesis, we cultured bacteria that were abundant on bleached tissue across multiple disease events and assessed their ability to cause bleaching disease. We identified the new pathogens Alteromonas sp. BL110, Aquimarina sp. AD1 and BL5 and Agarivorans sp BL7 that are phylogenetically diverse, distinct from the previous two pathogens and can also be found in low abundance in healthy individuals. Moreover, we found that bacterial communities of diseased individuals that were infected with these pathogens were less diverse and more divergent from each other than those of healthy algae. This study demonstrates that multiple and opportunistic pathogens can cause the same disease outcome for D. pulchra and we postulate that such pathogens are more common in marine systems than previously anticipated. © 2016 Society for Applied Microbiology and John Wiley & Sons Ltd.

  9. Bleach treatment of sputum samples aids pulmonary tuberculosis screening among HIV-infected patients in Laos.

    Science.gov (United States)

    Thammavong, C; Paboriboune, P; Bouchard, B; Harimanana, A; Babin, F-X; Phimmasone, P; Berland, J-L; Buisson, Y

    2011-10-01

    Laos has a high prevalence of tuberculosis (TB) and a slowly increasing prevalence of human immunodeficiency virus/acquired immunedeficiency syndrome (HIV/AIDS). Sputum smear microscopy is the only method currently available for routine screening of pulmonary TB, although it only detects one in three cases among persons living with HIV (PLWH). Bleach treatment of sputum samples (bleach method) has been shown to significantly improve the sensitivity of the test; however, its effectiveness in PLWH remains to be determined in Laos. To determine the performance of the bleach method as a diagnostic tool for pulmonary TB in PLWH and to assess its cost-effectiveness in Laos. Of 174 sputum samples collected from 92 patients, 29 were culture-positive for Mycobacterium tuberculosis in 17 patients. The sensitivity of the direct method and the bleach method was respectively 59% and 93%, and specificity was 100% for both methods. The incremental cost-effectiveness ratio for screening an additional case was US$17.40. The bleach method is simple, cheap, easy to perform and cost-effective in PLWH. Its implementation in laboratories involved in routine screening of pulmonary TB among PLWH would allow practitioners to start the treatment of this life-threatening co-infection earlier.

  10. Effect of Home Bleaching on the Translucency of CAD/CAM Systems.

    Science.gov (United States)

    Karci, Muhammet; Demir, Necla

    2017-11-10

    To evaluate the effect of a home bleaching agent (Opalescence PF) on the translucency of CAD/CAM ceramic systems. The 28 sintered ceramic specimens (IPS Empress CAD and IPS e.max CAD; 15 mm long, 10 mm wide, 1 mm thick) were divided into two subgroups as control and bleaching groups (n = 7). Carbamide peroxide (CP), 16%, home bleaching agent was applied onto the surface of each specimen for 6 hours per day for 7 days. A spectrophotometer (VITA Easyshade Advance) was used to measure the CIE L * a * b * coordinates and the reflectance value (Y) of the specimens on white and black backgrounds. The translucency parameter (TP), contrast ratio (CR), and opalescence parameter (OP) of the specimens were calculated. The data were statistically analyzed using Kolmogorov-Smirnov, one-way ANOVA, Tukey's test, and Pearson's correlation. Statistically significant differences in the TP values after 16% CP bleaching treatment were observed (p ˂ 0.05); however, no significant differences were found in the OP and CR values after the surface treatment (p ˃ 0.05). According to our study, patients who have all-ceramic restorations in their mouths should be careful when using home bleaching agents, because whitening agents can affect the translucency of all-ceramic restorations such as e.max CAD and Empress CAD. © 2017 by the American College of Prosthodontists.

  11. Effects of cold light bleaching on the color stability of composite resins

    Science.gov (United States)

    Cao, Liqun; Huang, Lijuan; Wu, Meisheng; Wei, Hua; Zhao, Shouliang

    2015-01-01

    To evaluate the effects of cold light bleaching on the color stability of four restorations using a thermocycling stain challenge. 160 specimens (10 mm in diameter and 2 mm thick) were fabricated from 4 composite resins (Gradia Direct-A, Z350XT, Premisa, and Précis) and divided into 4 subgroups. Color was assessed according to the CIEL*a*b* color scale at baseline, after the first cycle of bleaching, after thermocycling stain challenges, and after the second cycle of bleaching. Mean values were compared using three-way analysis of variance, and multiple comparisons of the mean values were performed using the Tukey-Kramer test. All groups showed significant color changes after stain challenge, the color change was more significant in Gradia Direct and Z350XT than in Premisa and Précis. After the second cycle of bleaching, color mostly recovered to its original values. The color stability of Gradia Direct and Z350XT was inferior to that of Premisa and Précis. The discoloration of composite resin materials can be partly removed after cold light bleaching. PMID:26309549

  12. Laccase for biobleaching of eucalypt kraft pulp by means of a modified industrial bleaching sequence.

    Science.gov (United States)

    Moldes, D; Vidal, T

    2012-01-01

    Biobleaching of kraft pulp is a possible application of laccase, but it has not been described in detail for complete industrial bleaching sequences yet. Therefore, in this work, the biobleaching of Eucalyptus globulus kraft pulp was performed using a modified industrial totally chlorine-free sequence. The modification consisted in the substitution of an enzymatic delignification stage, based on the application of laccase from Trametes villosa, for the first alkaline extraction one. The enzymatic stage was performed with several synthetic and natural mediators, namely 1-hydroxybenzotriazole (HBT), violuric acid (VA), methyl syringate, and syringaldehyde. Several pulp properties were analyzed after each stage of the bleaching process--kappa number, ISO brightness, viscosity, and optical properties of CIEL*a*b* system. The new biobleaching sequence improved the pulp properties, in comparison to the conventional bleaching sequence, if HBT or VA was used as mediators. VA was selected as the best mediator of those tested and the effect of its concentration in the enzymatic stage was subsequently studied. Reducing the initial concentration by 30%, the same pulp quality was obtained, but if the reduction attained 60%, an important decrease in pulp integrity was detected. The modified bleaching sequence could improve the bleached pulp properties (kappa number 10%, ISO brightness 1%, and viscosity 5%) in comparison to the mill sequence. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

  13. Personality Style in Patients Looking for Tooth Bleaching and Its Correlation with Treatment Satisfaction.

    Science.gov (United States)

    Martin, Javier; Rivas, Vanessa; Vildósola, Patricio; Moncada, Laura; Oliveira Junior, Osmir B; Saad, José Roberto C; Fernandez, Eduardo; Moncada, Gustavo

    2016-01-01

    In the last years the focus in dentistry has shifted to an "esthetic dentistry" approach, where patients are concerned about reaching a better look of their teeth. Vital tooth bleaching is a technique with immediate results, which improves the appearance and patient's self-esteem. The aim of this study was to recognize personality characteristics determined by the Millon Index of Personality Styles of participants looking for tooth bleaching and to correlate them to satisfaction with the treatment. Forty participants were included and filled out the Millon Index of Personality Styles form before treatment. Expectation about tooth bleaching was quantified from 1 to 5. Patients were treated with bleaching agent according to manufacturer's directions. One week after treatment, the patient's satisfaction was quantified from 1 to 5. Prevailing personality characteristics were determined. Expectations and satisfaction values of all patients were correlated with each of the presented personality scales by Spearman Rho test. Ten scales prevailed over their counterpart. Median of patient's expectation was 2 and satisfaction 4. Only the score of a single characteristic (extraversing) showed statistically significant correlation with patient satisfaction. Patients looking for tooth bleaching treatment seem to have common personality characteristics. Almost all of them wanted to achieve a moderate change in teeth color and the result of the treatment was usually satisfactory.

  14. The number of bleaching sessions influences pulp tissue damage in rat teeth.

    Science.gov (United States)

    Cintra, Luciano Tavares Angelo; Benetti, Francine; da Silva Facundo, Aguinaldo Cândido; Ferreira, Luciana Louzada; Gomes-Filho, João Eduardo; Ervolino, Edilson; Rahal, Vanessa; Briso, André Luiz Fraga

    2013-12-01

    Hydrogen peroxide tooth bleaching is claimed to cause alterations in dental tissue structures. This study investigated the influence of the number of bleaching sessions on pulp tissue in rats. Male Wistar rats were studied in 5 groups (groups 1S-5S) of 10 each, which differed by the number (1-5) of bleaching sessions. In each session, the animals were anesthetized, and 35% hydrogen peroxide gel was applied to 3 upper right molars. Two days after the experimental period, the animals were killed, and their jaws were processed for light microscope evaluation. Pulp tissue reactions were scored as follows: 1, no or few inflammatory cells and no reaction; 2, session, necrotic tissue in the pulp horns and underlying inflammatory changes were observed. The extent and intensity of these changes increased with the number of bleaching sessions. After 5 sessions, the changes included necrotic areas in the pulp tissue involving the second third of the radicular pulp and intense inflammation in the apical third. The number of bleaching sessions directly influenced the extent of pulp damage. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  15. Relative Contributions of Various Cellular Mechanisms to Loss of Algae during Cnidarian Bleaching.

    Science.gov (United States)

    Bieri, Tamaki; Onishi, Masayuki; Xiang, Tingting; Grossman, Arthur R; Pringle, John R

    2016-01-01

    When exposed to stress such as high seawater temperature, corals and other cnidarians can bleach due to loss of symbiotic algae from the host tissue and/or loss of pigments from the algae. Although the environmental conditions that trigger bleaching are reasonably well known, its cellular and molecular mechanisms are not well understood. Previous studies have reported the occurrence of at least four different cellular mechanisms for the loss of symbiotic algae from the host tissue: in situ degradation of algae, exocytic release of algae from the host, detachment of host cells containing algae, and death of host cells containing algae. The relative contributions of these several mechanisms to bleaching remain unclear, and it is also not known whether these relative contributions change in animals subjected to different types and/or durations of stresses. In this study, we used a clonal population of the small sea anemone Aiptasia, exposed individuals to various precisely controlled stress conditions, and quantitatively assessed the several possible bleaching mechanisms in parallel. Under all stress conditions tested, except for acute cold shock at 4°C, expulsion of intact algae from the host cells appeared to be by far the predominant mechanism of bleaching. During acute cold shock, in situ degradation of algae and host-cell detachment also became quantitatively significant, and the algae released under these conditions appeared to be severely damaged.

  16. Efficacy of whitening oral rinses and dentifrices on color stability of bleached teeth

    Directory of Open Access Journals (Sweden)

    Muhammet Karadas

    2015-01-01

    Full Text Available Objective: This study aimed to evaluate the effect of whitening toothpastes and mouthrinses on the color stability of teeth bleached with 16% carbamide peroxide (CP after immersion in coffee solution. Materials and methods: Specimens obtained from bovine incisors were bleached with 16% CP for 14 days. After bleaching, the specimens were stained in coffee solution for 24 h and randomly divided into eight groups according to the following products (n = 10: distilled water (control group, DW, Scope White mouthrinse (SW, Crest 3D White mouthrinse (CWR, Crest 3D White toothpaste (CWT, Crest 3D White toothpaste and Crest 3D White mouthrinse (CWT + CWR, Listerine Whitening toothpaste (LWT, Listerine Whitening mouthrinse (LWR, and Listerine Whitening mouthrinse and Listerine Whitening toothpaste (LWR + LWT. Color measurements were conducted using a spectrophotometer. The data were assessed by analysis of variance for repeated measures and Tukey’s multiple comparison test (p  3.46. The whitening effect of CWR on teeth stained after bleaching was significantly greater than that in the other groups (p  0.05. The combination of mouthrinse and toothpaste did not increase the degree of tooth whitening. Conclusion: Whitening mouthrinse and toothpaste had similar effects on the control group in terms of whitening of teeth stained after bleaching. Nevertheless, Crest 3D White mouthrinse produced the greatest recovery whitening effect among all the products tested.

  17. Clarifications, guidelines and questions about the dental bleaching "associated" with orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Alberto Consolaro

    2013-10-01

    Full Text Available With regard to the best moment for carrying out or recommending dental bleaching to orthodontic patients, some explanations and orientations are given in order to answers the following questions: 1 Why orthodontic treatment completion is considered the best opportunity for carrying out the procedure? 2 Why dental bleaching should not be performed immediately before orthodontic treatment? 3 If that would be possible at any special case, what would that be? 4 Why dental bleaching should not be performed during orthodontic treatment? 5 If that would be possible at any special case, what would that be? This article highlights why it is essential to protect both the mucosa and the cervical region, regardless of the moment when dental bleaching is performed, whether associated with orthodontic treatment or not. The "how", "why" and "if" of whether or not it is convenient to perform dental bleaching before orthodontic treatment are still a matter of clinical suggestion, as it is a procedure that is under analysis, empirical knowledge waiting for scientific proof or disproof! Although tooth enamel has adamantine fluid flowing within it, providing a specific metabolism that is peculiar to its own and which could scientifically explain and base the option of carrying out teeth whitening before and during orthodontic treatment, we must still be very careful.

  18. Erosion and abrasion on dental structures undergoing at-home bleaching

    Directory of Open Access Journals (Sweden)

    Tarquinio SBC

    2011-07-01

    Full Text Available Flávio Fernando Demarco1, Sônia Saeger Meireles2, Hugo Ramalho Sarmento1, Raquel Venâncio Fernandes Dantas1, Tatiana Botero3, Sandra Beatriz Chaves Tarquinio11Graduate Program in Dentistry, School of Dentistry, Federal University of Pelotas, Brazil; 2Department of Operative Dentistry, Federal University of Paraíba, Brazil; 3Cariology, Restorative Science, and Endodontics Department, School of Dentistry, University of Michigan, MI, USAAbstract: This review investigates erosion and abrasion in dental structures undergoing at-home bleaching. Dental erosion is a multifactorial condition that may be idiopathic or caused by a known acid source. Some bleaching agents have a pH lower than the critical level, which can cause changes in the enamel mineral content. Investigations have shown that at-home tooth bleaching with low concentrations of hydrogen or carbamide peroxide have no significant damaging effects on enamel and dentin surface properties. Most studies where erosion was observed were in vitro. Even though the treatment may cause side effects like sensitivity and gingival irritation, these usually disappear at the end of treatment. Considering the literature reviewed, we conclude that tooth bleaching agents based on hydrogen or carbamide peroxide have no clinically significant influence on enamel/dentin mineral loss caused by erosion or abrasion. Furthermore, the treatment is tolerable and safe, and any adverse effects can be easily reversed and controlled.Keywords: peroxide, tooth bleaching, enamel, dentin, erosion, abrasion

  19. 3D Surface Profile and Color Stability of Tooth Colored Filling Materials after Bleaching.

    Science.gov (United States)

    Irawan, Bryant Anthony; Irawan, Stacey Natalie; Masudi, Sam'an Malik; Sukminingrum, Ninin; Alam, Mohammad Khursheed

    2015-01-01

    This study aims to evaluate the effects of vital tooth bleaching with carbamide peroxide home bleaching and in-office bleaching on the color stability and 3D surface profile of dental restorative filling materials. Thirty discs (n = 30) measure 6 mm in diameter and 2 mm thick for each of three restorative materials. These are nanofilled composite Filtek Z350 XT, the submicron composite Estelite Σ Quick, and nanofilled glass ionomer Ketac N100 nanoionomer and were fabricated in shade A2. Each group was further divided into three subgroups (n = 10): subgroup A (Opalescence PF), subgroup B (Opalescence Boost in-office bleaching), and subgroup C (distilled water) serving as control. Samples were bleached according to the manufacturer's instructions for a period of two weeks. The Commission Internationale de L'Eclairage (CIE L(*), a(*), b(*)) system was chosen for image processing, while 3D surface profile was tested with atomic force microscopy (AFM). Statistical analyses were performed with the Mann-Whitney tests and Krusal-Wallis with a P value of ≤ 0.05. The three restorative materials showed significant color changes (ΔE); P ≤ 0.05. In diminishing order, the mean color changes recorded were Estelite Σ (3.82 ± 1.6) > Ketac Nano (2.97 ± 1.2) > Filtek Z350 XT (2.25 ± 1.0). However, none of the tested materials showed statistically significant changes in surface roughness; P > 0.05.

  20. The Stability of the Giant Clam Holobiont over Time and during Bleaching Stress

    KAUST Repository

    Pappas, Melissa

    2017-12-01

    The stability of marine photosymbiotic holobionts has major implications for the future of coral reef communities. This study aims to describe the stability of the Red Sea giant clam holobiont over the duration of one year and during induced bleaching stress under laboratory thermal manipulations. Tridacnid clams of the species Tridacna maxima were sampled at three reef locations near the central Saudi coast of the Red Sea. Associated Symbiodinium of Red Sea giant clams have previously been described to be part of only Clade A, which suggests a strong specificity in the clam-algal partnership, but specific types and potential shifting of types within this clade have not been examined for giant clams. The results from this study confirm that tridacnid symbiont types shift over time and the change between three A1 types suggests a biological and functional significance of two undescribed A1 Symbiodinium types. Experimental bleaching shows that Red Sea giant clams, although exposed to rather hot temperatures naturally, will bleach at 34°C after two weeks, and severely bleached clams likely will not recover. During bleaching, Symbiodinium types shift as well, and shift more drastically than seasonal shifts during the year. This shifting may be an evolved characteristic of the giant clam to aid in surviving major changes in the environment. However, more research is needed to determine if these holobionts are capable of keeping up with the global forecast of warming in reef environments.

  1. Clinical efficacy of a bleaching system based on hydrogen peroxide with or without light activation.

    Science.gov (United States)

    Calatayud, Jesús Oteo; Calatayud, Carlos Oteo; Zaccagnini, Alvaro Oteo; Box, Ma José Calvo

    2010-01-01

    The objective of the present study was to assess the clinical efficacy of a dental bleaching system based on hydrogen peroxide with or without light activation. This randomized controlled trial evaluated the effect of the light when applied to the hydrogen peroxide by using a split-mouth design with 21 patients, with light activation in one hemi-arch but not in the other. The bleaching agent was QuickWhite 35% hydrogen peroxide and activation was conducted with a diode lamp (Luma Cool). The Classic Vita Guide was used to score tooth shades. Two consecutive applications of hydrogen peroxide were made to one hemi-arch, each light-activated for 10 min. The other hemi-arch was then identically treated but without light activation. After removal of the bleaching agent, the shade was re-scored and the Wilcoxon signed ranks test was used to compare differences in tooth shade values. The bleaching treatment produced significant shade changes (P < 0.01) in both hemi-arches. After treatment, there were no statistically significant differences between light-treated and non-light-treated tooth types (central incisors, lateral incisors, and canines). However, taking central incisor, lateral incisor, and canine as a group, comparison between each hemi-arch showed a significant effect in the hemi-arch with light activation (P < 0.05). The use of diode light with a 35% hydrogen peroxide gel slightly improved the dental bleaching.

  2. THE EFFECT OF WATER REDUCTION IN KRAFT PULP WASHING IN ECF BLEACHING

    Directory of Open Access Journals (Sweden)

    Tânia Cristina Frigieri

    Full Text Available ABSTRACT The main objective of this work was to study the technical viability of using the cellulose bleaching effluent, at several stages of the process, seeking fresh water reduction in pulp washing, and evaluating its effect on pulp quality. Eucalyptus spp. industrial cellulosic pulp with oxygen was used in this experiment. The same bleaching sequence D(E+PDP was performed ten times, under the same conditions (temperature, consistency and time. Counter current washing was used in the bleaching stages, and each sequence was carried out with different washing factors: 9, 6, 3, 0 m3 of distilled water/ton of pulp, trying to reach brightness of 92 ± 0,5% ISO. The ten sequences sought to achieve the stability of the effluent organic load, measured by the chemical oxygen demand (COD. Then, the COD results were compared to the brightness ones from the bleached pulp. The evaluated results from the ten sequences and four different washings showed an increasing in COD due to the organic load accumulation, resulting from the reuse of effluent from previous sequences. This COD increasing provided the lower brightness results during the cycles, besides the water reduction, evidencing the necessity of washing between bleaching stages. In this study, the obtained result for the pulp washing up to 3m3/t was tolerable and even recommended. On the other hand, the pulp without any washing (0m3/t, due to the lack of enough brightness, it is commercially unviable.

  3. ENSO Weather and Coral Bleaching on the Great Barrier Reef, Australia

    Science.gov (United States)

    McGowan, Hamish; Theobald, Alison

    2017-10-01

    The most devastating mass coral bleaching has occurred during El Niño events, with bleaching reported to be a direct result of increased sea surface temperatures (SSTs). However, El Niño itself does not cause SSTs to rise in all regions that experience bleaching. Nor is the upper ocean warming trend of 0.11°C per decade since 1971, attributed to global warming, sufficient alone to exceed the thermal tolerance of corals. Here we show that weather patterns during El Niño that result in reduced cloud cover, higher than average air temperatures and higher than average atmospheric pressures, play a crucial role in determining the extent and location of coral bleaching on the world's largest coral reef system, the World Heritage Great Barrier Reef (GBR), Australia. Accordingly, synoptic-scale weather patterns and local atmosphere-ocean feedbacks related to El Niño-Southern Oscillation (ENSO) and not large-scale SST warming due to El Niño alone and/or global warming are often the cause of coral bleaching on the GBR.

  4. Effect of tooth bleaching agents on protein content and mechanical properties of dental enamel.

    Science.gov (United States)

    Elfallah, Hunida M; Bertassoni, Luiz E; Charadram, Nattida; Rathsam, Catherine; Swain, Michael V

    2015-07-01

    This study investigated the effect of two bleaching agents, 16% carbamide peroxide (CP) and 35% hydrogen peroxide (HP), on the mechanical properties and protein content of human enamel from freshly extracted teeth. The protein components of control and treated enamel were extracted and examined on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Marked reduction of the protein matrix and random fragmentation of the enamel proteins after bleaching treatments was found. The mechanical properties were analyzed with Vickers indentations to characterize fracture toughness, and nanoindentation to establish enamel hardness, elastic modulus and creep deformation. Results indicate that the hardness and elastic modulus of enamel were significantly reduced after treatment with CP and HP. After bleaching, the creep deformation at maximum load increased and the recovery upon unloading reduced. Crack lengths of CP and HP treated enamel were increased, while fracture toughness decreased. Additionally, the microstructures of fractured and indented samples were examined with field emission gun scanning electron microscopy (FEG-SEM) showing distinct differences in the fracture surface morphology between pre- and post-bleached enamel. In conclusion, tooth bleaching agents can produce detrimental effects on the mechanical properties of enamel, possibly as a consequence of damaging or denaturing of its protein components. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  5. Influence of whitening gel on pulp chamber temperature rise by in-office bleaching technique

    Directory of Open Access Journals (Sweden)

    Sandro Cordeiro Loretto

    Full Text Available INTRODUCTION: Dental bleaching is a conservative method for the aesthetic restoration of stained teeth. However, whitening treatments are likely to cause adverse effects when not well planned and executed. OBJECTIVE: This study evaluated the influence of whitening gel on temperature rise in the pulp chamber, using the in-office photoactivated dental bleaching technique. MATERIAL AND METHOD: The root portion of an upper central human incisor was sectioned 3mm below the cemento-enamel junction. The root canal was enlarged to permit the insertion of the K-type thermocouple sensor (MT-401 into the pulp chamber, which was filled with thermal paste to facilitate the transfer of heat during bleaching. Three photosensitive whitening agents (35% hydrogen peroxide were used: Whiteness HP (FGM, Whiteness HP Maxx (FGM and Lase Peroxide Sensy (DMC. An LED photocuring light (Flash Lite - Discus Dental was used to activate the whitening gels. Six bleaching cycles were performed on each group tested. The results were submitted to one-way ANOVA and LSD t-test (α<0.05. RESULT: The lowest mean temperature variation (ºC was detected for Lase Peroxide Sensy (0.20, while the highest was recorded for Whiteness HP (1.50. CONCLUSION: The Whiteness HP and Whiteness HP Maxx whitening gels significantly affected the temperature rise in the pulp chamber during bleaching, and this variation was dependent on the type of whitening gel used.

  6. Combining Bio-inspired Sensing with Bio-inspired Locomotion

    DEFF Research Database (Denmark)

    Shaikh, Danish; Hallam, John; Christensen-Dalsgaard, Jakob

    In this paper we present a preliminary Braitenberg vehicle–like approach to combine bio-inspired audition with bio-inspired quadruped locomotion in simulation. Locomotion gaits of the salamander–like robot Salamandra robotica are modified by a lizard’s peripheral auditory system model...

  7. Complete Genome Sequences of Eight Helicobacter pylori Strains with Different Virulence Factor Genotypes and Methylation Profiles, Isolated from Patients with Diverse Gastrointestinal Diseases on Okinawa Island, Japan, Determined Using PacBio Single-Molecule Real-Time Technology

    Science.gov (United States)

    Shiroma, Akino; Teruya, Kuniko; Shimoji, Makiko; Nakano, Kazuma; Juan, Ayaka; Tamotsu, Hinako; Terabayashi, Yasunobu; Aoyama, Misako; Teruya, Morimi; Suzuki, Rumiko; Matsuda, Miyuki; Sekine, Akihiro; Kinjo, Nagisa; Kinjo, Fukunori; Yamaoka, Yoshio; Hirano, Takashi

    2014-01-01

    We report the complete genome sequences of eight Helicobacter pylori strains isolated from patients with gastrointestinal diseases in Okinawa, Japan. Whole-genome sequencing and DNA methylation detection were performed using the PacBio platform. De novo assembly determined a single, complete contig for each strain. Furthermore, methylation analysis identified virulence factor genotype-dependent motifs. PMID:24744331

  8. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the technology of accelerated formation of bio-functions (R and D of the technology of creation of novel advanced enzymes); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu (shingata kokino koso sosei gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D on creation technique of novel advanced enzymes. In fiscal 1997, a novel mutagenesis technique was developed to obtain more kinds of mutational genes by shuffling between clonal genes as compared with the previous homogeneous recombination. A genotype- and phenotype-linking technology was developed by expressing random motifs (peptide as components of the active site of protein) on bacteria, and by developing a single-motif protein library. Study was made on a selection system for functional molecules of catalytic activities in a gene level, and a selection system for function of signal transduction. Analysis and evaluation study on vitro experimental technology can be efficiently promoted by recognizing the fitness landscape of target protein molecules. As a result, instead of the conventional method which needs several cycles of mutation and screening of 3-4 week/cycle, an efficient method possible to obtain multiple mutants was established. Research work was also promoted by various organizations to develop an accelerated formation technology of bio-functions. 68 refs., 51 figs., 14 tabs.

  9. Results of the International Energy Agency Round Robin on Fast Pyrolysis Bio-oil Production

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Douglas C.; Meier, Dietrich; Oasmaa, Anja; van de Beld, Bert; Bridgwater, Anthony V.; Marklund, Magnus

    2017-04-06

    An international round robin study of the production of fast pyrolysis bio-oil was undertaken. Fifteen institutions in six countries contributed. Three biomass samples were distributed to the laboratories for processing in fast pyrolysis reactors. Samples of the bio-oil produced were transported to a central analytical laboratory for analysis. The round robin was focused on validating the pyrolysis community understanding of production of fast pyrolysis bio-oil by providing a common feedstock for bio-oil preparation. The round robin included: •distribution of 3 feedstock samples from a common source to each participating laboratory; •preparation of fast pyrolysis bio-oil in each laboratory with the 3 feedstocks provided; •return of the 3 bio-oil products (minimum 500 ml) with operational description to a central analytical laboratory for bio-oil property determination. The analyses of interest were: density, viscosity, dissolved water, filterable solids, CHN, S, trace element analysis, ash, total acid number, pyrolytic lignin, and accelerated aging of bio-oil. In addition, an effort was made to compare the bio-oil components to the products of analytical pyrolysis through GC/MS analysis. The results showed that clear differences can occur in fast pyrolysis bio-oil properties by applying different reactor technologies or configurations. The comparison to analytical pyrolysis method suggested that Py-GC/MS could serve as a rapid screening method for bio-oil composition when produced in fluid-bed reactors. Furthermore, hot vapor filtration generally resulted in the most favorable bio-oil product, with respect to water, solids, viscosity, and total acid number. These results can be helpful in understanding the variation in bio-oil production methods and their effects on bio-oil product composition.

  10. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  11. Bio-tribology.

    Science.gov (United States)

    Dowson, Duncan

    2012-01-01

    It is now forty six years since the separate topics of friction, lubrication, wear and bearing design were integrated under the title 'Tribology' [Department of Education and Science, Lubrication (Tribology) Education and Research. A Report on the Present Position and Industry's Needs, HMSO, London, 1966]. Significant developments have been reported in many established and new aspects of tribology during this period. The subject has contributed to improved performance of much familiar equipment, such as reciprocating engines, where there have been vast improvements in engine reliability and efficiency. Nano-tribology has been central to remarkable advances in information processing and digital equipment. Shortly after widespread introduction of the term tribology, integration with biology and medicine prompted rapid and extensive interest in the fascinating sub-field now known as Bio-tribology [D. Dowson and V. Wright, Bio-tribology, in The Rheology of Lubricants, ed. T. C. Davenport, Applied Science Publishers, Barking, 1973, pp. 81-88]. An outline will be given of some of the developments in the latter field.

  12. In vitro evaluation of the microhardness of bovine enamel exposed to acid solutions after bleaching

    Directory of Open Access Journals (Sweden)

    Caio Gorgulho Zanet

    2011-12-01

    Full Text Available Acid erosion is a superficial loss of enamel caused by chemical processes that do not involve bacteria. Intrinsic and extrinsic factors, such as the presence of acid substances in the oral cavity, may cause a pH reduction, thus potentially increasing acid erosion. The aim of this study was to evaluate the microhardness of bleached and unbleached bovine enamel after immersion in a soda beverage, artificial powder juice and hydrochloric acid. The results obtained for the variables of exposure time, acid solution and substrate condition (bleached or unbleached enamel were statistically analyzed by the ANOVA and Tukey tests. It was concluded that a decrease in microhardness renders dental structures more susceptible to erosion and mineral loss, and that teeth left unbleached show higher values of microhardness compared to bleached teeth.

  13. Biochemical methane potential of kraft bleaching effluent and codigestion with other in-mill streams

    DEFF Research Database (Denmark)

    Fitamo, Temesgen Mathewos; Dahl, Olli; Master, Emma

    2016-01-01

    A biochemical methane potential assay was conducted to investigate the anaerobic digestibility of bleaching effluent from hardwood kraft pulping and the potential of codigestion with other effluents from an integrated pulp and paper mill. Four in-mill streams were tested individually and in combi......A biochemical methane potential assay was conducted to investigate the anaerobic digestibility of bleaching effluent from hardwood kraft pulping and the potential of codigestion with other effluents from an integrated pulp and paper mill. Four in-mill streams were tested individually...... of anaerobic inhibitors such as adsorbable organic halogens (36 mg/L), total sulfur (170 mg/L), and resin and fatty acids (3.2 mg/L). Therefore, the total bleaching effluent from hardwood kraft pulping may be considered for full-scale anaerobic wastewater treatment, either as a singular stream or as part...... of a composite stream including other in-mill effluents....

  14. Removal of COD and color loads in bleached kraft pulp effluents by bottom ashes from boilers.

    Science.gov (United States)

    Van Tran, A

    2008-07-01

    The effectiveness of the bottom ashes from biomass and coal-fired boilers in removing chemical oxygen demand (COD) and colorloads in effluents of a kraft pulp bleachery plant is investigated. The effluents tested are those of the sulfuric acid treatment (A stage) of a hardwood kraft pulp, and of the first acidic (chlorine or chlorine dioxide) and second alkaline (extraction) stages in the chlorine and elemental chlorine-free (ECF) bleaching lines of hardwood and softwood kraft pulps. The coal-fired boiler's bottom ashes are unable to remove either COD or color load in the bleached kraft pulp effluents. However, the bottom ashes of the biomass boiler are effective in removing COD and color loads of the acidic and alkaline effluents irrespective of the bleaching process or wood species. In particular, these ashes increase the pH of all the effluents examined.

  15. Ultrasound aided in situ transesterification of crude palm oil adsorbed on spent bleaching clay

    International Nuclear Information System (INIS)

    Boey, Peng-Lim; Ganesan, Shangeetha; Maniam, Gaanty Pragas; Ali, Dafaalla Mohamed Hag

    2011-01-01

    Research highlights: → Crude palm oil adsorbed on spent bleaching clay converted to biodiesel. → Ultrasound dislodges adsorbed oil from spent bleaching clay into reaction mixture. → Co-solvents promotes miscibility of the reactants. -- Abstract: Adsorbed crude palm oil on spent bleaching clay (SBC) was in situ transesterified to methyl esters (biodiesel) by the aid of ultrasound and organic co-solvents (petroleum ether (PE) or ethyl methyl ketone (EMK)). The SBC under study was found to contain 24.2-27.0% of crude oil with free fatty acids (FFA) of 3.01% and moisture content of 0.29%. The optimized reaction conditions were as follows: methanol to oil molar ratio of 150:1; catalyst (KOH), 20%; reaction temperature, 60 ± 2 o C; reaction time, 2 h. Using PE as a co-solvent, highest conversion of 75.2% was achieved while 60% was recorded with EMK.

  16. Effects of bleaching wastewater irrigation on soil quality of constructed reed wetlands

    Directory of Open Access Journals (Sweden)

    Cheng Ding

    2016-10-01

    Full Text Available Constructed reed wetland microcosms (CRWs in a lab of east China have been irrigated with bleaching wastewater per month for a reed growth season. The soil physicochemical properties, enzyme activities (i.e. urease, invertase, polyphenol oxidase, alkaline phosphatase and cellulase and soil microbial diversity were assayed before and after the exposure experiment. Compared to the river water irrigated controls (CKs, bleaching wastewater application has no marked influence on soil pH, but significantly increased soil Na+, total halogen and absorbable organic halogen (AOX contents, which induced the increasing of soil electrical conductivity. Furthermore, soil enzyme activities displayed significant variation (except for polyphenol oxidase. Bleaching wastewater irrigation decreased Sorenson’s pairwise similarity coefficient (Cs, which indicated the changes of the structure of bacterial and fungal communities. However, only the diversity of bacterial community was inhibited and has no effect on the diversity of fungal community, as evidenced by the calculated Shannon–Wiener index (H.

  17. Selective visualization of fluorescent sterols in Caenorhabditis elegans by bleach-rate-based image segmentation

    DEFF Research Database (Denmark)

    Wüstner, Daniel; Landt Larsen, Ane; Færgeman, Nils J.

    2010-01-01

    to detect DHE selectively, based on its rapid bleaching kinetics compared to cellular autofluorescence. Worms were repeatedly imaged on an ultraviolet-sensitive wide field (UV-WF) microscope, and bleaching kinetics of DHE were fitted on a pixel-basis to mathematical models describing the intensity decay......The nematode Caenorhabditis elegans is a genetically tractable model organism to investigate sterol transport. In vivo imaging of the fluorescent sterol, dehydroergosterol (DHE), is challenged by C. elegans' high autofluorescence in the same spectral region as emission of DHE. We present a method....... Bleach-rate constants were determined for DHE in vivo and confirmed in model membranes. Using this method, we could detect enrichment of DHE in specific tissues like the nerve ring, the spermateca and oocytes. We confirm these results in C. elegans gut-granule-loss (glo) mutants with reduced...

  18. Formulation of a grease from spent bleaching earth, waste cooking oil and fumed silica as additives

    International Nuclear Information System (INIS)

    Mohd Khairul Nizam Mohd Zuhan; Hayder Abdul Bari

    2010-01-01

    The study is to formulate new multi-purpose grease from industrial wastes. In this study we intent to use waste cooking oil and spent bleaching earth as a main ingredients for the grease formulation. Additives such as fumed silica, molybdenum disulphide and other type of additives are introduced to improve the properties of the grease. The best percentage of waste cooking oil, spent bleaching earth and additives added is determined (w/w) during this study to produces the best consistency through penetration test based on NGLI standard. Other properties being determined include drop point, oxidation stability, and oil separation test through ASTM method. From result obtained, some necessary modification and additives addition into spent bleaching earth and waste cooking oil can produce new multi-purpose based grease that can be commercialized. (author)

  19. Geochemical Records of Bleaching Events and the Associated Stressors From the Great Barrier Reef

    Science.gov (United States)

    Roark, E. B.; McCulloch, M.; Ingram, B. L.; Marshall, J. F.

    2003-12-01

    The health of coral reefs world-wide is increasingly threatened by a wide array of stressors. On the Great Barrier Reef (GBR) these stressors include increased sediment flux associated with land use changes, increased sea surface temperatures (SST) and salinity changes due to large floods, the latter two of which are factors in an increased number of bleaching events. The ability to document long-term change in these stressors along with changes in the number of bleaching events would help discern what are natural and anthropogenic changes in this ecosystem. Here we present results of an initial calibration effort aimed at identifying bleaching events and the associated stressors using stable isotopic and trace element analysis in coral cores. Three ˜15-year time series of geochemical measurements (δ 13C, δ 18O, and Sr/Ca) on Porites coral cores obtained from Pandora Reef and the Keppel Islands on the GBR have been developed at near weekly resolution. Since the δ 13C of the coral skeletal carbonate is known to be affected by both environmental factors (e.g. insolation and temperature) and physiological factors (e.g. photosynthesis, calcification, and the statues of the symbiotic relationship between corals and zooxanthellae) it is the most promising proxy for reconstructing past bleaching events. The first record (PAN-98) comes from a coral head that had undergone bleaching and died shortly after the large-scale bleaching events on Pandora Reef in 1998. A second core (PAN-02) was collected from a living coral within 10m of PAN-98 in 2002. Sr/Ca ratios in both cores tracked even the smallest details of an in situ SST record. The increase in SST that occurred three to four weeks prior to bleaching was faithfully recorded by a similar decrease in the Sr/Ca ratio in PAN-98, indicating that calcification continued despite the high SST of 30-31° C. The δ 13C values decreased by about 5‰ , one week after the SST increase, and remained at this value for about 4

  20. Bio-objects and the media: the role of communication in bio-objectification processes.

    Science.gov (United States)

    Maeseele, Pieter; Allgaier, Joachim; Martinelli, Lucia

    2013-06-01

    The representation of biological innovations in and through communication and media practices is vital for understanding the nature of "bio-objects" and the process we call "bio-objectification." This paper discusses two ideal-typical analytical approaches based on different underlying communication models, ie, the traditional (science- and media-centered) and media sociological (a multi-layered process involving various social actors in defining the meanings of scientific and technological developments) approach. In this analysis, the latter is not only found to be the most promising approach for understanding the circulation, (re)production, and (re)configuration of meanings of bio-objects, but also to interpret the relationship between media and science. On the basis of a few selected examples, this paper highlights how media function as a primary arena for the (re)production and (re)configuration of scientific and biomedical information with regards to bio-objects in the public sphere in general, and toward decision-makers, interest groups, and the public in specific.

  1. Mild Biomass Liquefaction Process for Economic Production of Stabilized Refinery-Ready Bio-oil

    Energy Technology Data Exchange (ETDEWEB)

    Gangwal, Santosh [Southern Research, Durham, NC (United States); Meng, Jiajia [Southern Research, Durham, NC (United States); McCabe, Kevin [Southern Research, Durham, NC (United States); Larson, Eric [Princeton Univ., NJ (United States). Princeton Environmental Inst.; Mastro, Kelly [Southern Research, Durham, NC (United States)

    2016-04-25

    Southern Research (SR) in cooperation with U.S. Department of Energy (DOE), Bioenergy Technology Office (BETO), investigated a biomass liquefaction process for economic production of stabilized refinery-ready bio-oil. The project was awarded by DOE under a Funding Opportunity Announcement (DE-FOA-0000686) for Bio-oil Stabilization and Commoditization that intended to evaluate the feasibility of using bio-oil as a potential feedstock in an existing petroleum refinery. SR investigated Topic Area 1 of the FOA at Technology Readiness Level 2-3 to develop thermochemical liquefaction technologies for producing a bio-oil feedstock from high-impact biomass that can be utilized within a petroleum refinery. Bio-oil obtained from fast pyrolysis of biomass is a green intermediate that can be further upgraded into a biofuel for blending in a petroleum refinery using a hydro-deoxygenation (HDO) route. Co-processing pyrolysis bio-oil in a petroleum refinery is an attractive approach to leverage the refinery’s existing capital. However, the petroleum industry is reluctant to accept pyrolysis bio-oil because of a lack of a standard definition for an acceptable bio-oil feedstock in existing refinery processes. Also per BETO’s multiyear program plan, fast pyrolysis-based bio-fuel is presently not cost competitive with petroleum-based transportation fuels. SR aims to develop and demonstrate a cost-effective low-severity thermal liquefaction and hydrodeoxygenation (HDO) process to convert woody biomass to stabilized bio-oils that can be directly blended with hydrotreater input streams in a petroleum refinery for production of gasoline and/or diesel range hydrocarbons. The specific project objectives are to demonstrate the processes at laboratory scale, characterize the bio-oil product and develop a plan in partnership with a refinery company to move the technology towards commercialization.

  2. Catalytic Hydrogenation of Bio-Oil for Chemicals and Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Douglas C.

    2006-02-14

    The scope of work includes optimizing processing conditions and demonstrating catalyst lifetime for catalyst formulations that are readily scaleable to commercial operations. We use a bench-scale, continuous-flow, packed-bed, catalytic, tubular reactor, which can be operated in the range of 100-400 mL/hr., from 50-400 C and up to 20MPa (see Figure 1). With this unit we produce upgraded bio-oil from whole bio-oil or useful bio-oil fractions, specifically pyrolytic lignin. The product oils are fractionated, for example by distillation, for recovery of chemical product streams. Other products from our tests have been used in further testing in petroleum refining technology at UOP and fractionation for product recovery in our own lab. Further scale-up of the technology is envisioned and we will carry out or support process design efforts with industrial partners, such as UOP.

  3. Effects of fluoride or nanohydroxiapatite on roughness and gloss of bleached teeth.

    Science.gov (United States)

    Pedreira De Freitas, Ana Carolina; Botta, Sérgio Brossi; Teixeira, Fernanda De Sá; Salvadori, Maria Cecília Barbosa Silveira; Garone-Netto, Narciso

    2011-12-01

    The aim of this study was to describe roughness and gloss alterations of enamel after treatment with 38% hydrogen peroxide (HP) and after polishing with 2% neutral sodium fluoride (SF) or a dental tooth paste containing nanohydroxiapatite particles (nHA) using power spectral density (PSD) description, roughness parameters (Ra, RMS, and Z range) and gloss analysis. An atomic force microscope (AFM) and a spectrophotometer were used to analyze eighteen specimens of upper incisors. After initial analyses, all specimens were bleached with 38% HP for 135 min. The specimens were analyzed after bleaching. Nine specimens were polished with SF (Group Fluor) and the other nine specimens were polished with nHA (Group nHA), then all specimens were analyzed after polishing. Roughness and gloss were analyzed with ANOVA and Tukey's t-test. No statistical difference was found for Ra and RMS among initial, after bleaching and after polishing in both groups. For Z range, Group nHA showed a significant decrease after polishing. Bleaching with 38% HP did not increase the PSD in the spatial frequency of the visible light spectrum range in both groups. After polishing, nHA group showed a decrease in PSD for all morphological wavelengths. Gloss did not show statistical difference after bleaching in both groups. Gloss showed significant increase after polishing with nHA. bleaching treatment with 38% HP didn't alter enamel surface roughness or gloss. PSD analyses were very suitable to identifying the morphological changes on the surfaces. Copyright © 2011 Wiley Periodicals, Inc.

  4. Estimating the effect of multiple environmental stressors on coral bleaching and mortality.

    Directory of Open Access Journals (Sweden)

    Paul D Welle

    Full Text Available Coral cover has been declining in recent decades due to increased temperatures and environmental stressors. However, the extent to which different stressors contribute both individually and in concert to bleaching and mortality is still very uncertain. We develop and use a novel regression approach, using non-linear parametric models that control for unobserved time invariant effects to estimate the effects on coral bleaching and mortality due to temperature, solar radiation, depth, hurricanes and anthropogenic stressors using historical data from a large bleaching event in 2005 across the Caribbean. Two separate models are created, one to predict coral bleaching, and the other to predict near-term mortality. A large ensemble of supporting data is assembled to control for omitted variable bias and improve fit, and a significant improvement in fit is observed from univariate linear regression based on temperature alone. The results suggest that climate stressors (temperature and radiation far outweighed direct anthropogenic stressors (using distance from shore and nearby human population density as a proxy for such stressors in driving coral health outcomes during the 2005 event. Indeed, temperature was found to play a role ~4 times greater in both the bleaching and mortality response than population density across their observed ranges. The empirical models tested in this study have large advantages over ordinary-least squares-they offer unbiased estimates for censored data, correct for spatial correlation, and are capable of handling more complex relationships between dependent and independent variables. The models offer a framework for preparing for future warming events and climate change; guiding monitoring and attribution of other bleaching and mortality events regionally and around the globe; and informing adaptive management and conservation efforts.

  5. The effect of home-bleaching application on the color and translucency of five resin composites.

    Science.gov (United States)

    Kurtulmus-Yilmaz, Sevcan; Cengiz, Esra; Ulusoy, Nuran; Ozak, Sule Tugba; Yuksel, Ece

    2013-11-01

    The aim of this study was to investigate the effect of home bleaching agents on the color and translucency of resin composites. Thirty disc shaped specimens (1mm thick) were fabricated from each resin composite (Reflexions, Grandio, Gradia Direct, Clearfil Majesty Esthetic, Ceram-X Mono) and divided into 3 subgroups as carbamide peroxide (CP, Opalescence 10% PF), hydrogen peroxide (HP, 10% Opalescence Treswhite Supreme) and control group (n=10). Baseline CIE L*a*b* color coordinates were measured with spectrophotometer and translucency parameters (TP) were calculated. CP and HP groups were treated with bleaching agents according to manufacturers' instructions and control group was stored in distilled water (DW) for 14 days. Color and translucency measurements were repeated and color differences were calculated, ΔE values>3.3 were considered as clinically unacceptable. Clinically unacceptable color change was detected for all resin composites exposed to bleaching agents and there was significant color difference between the control group and bleached specimens (P<0.05). However no significant color difference was found between CP and HP groups. Intragroup comparison revealed that Ceram-X Mono showed the highest color change but there was no significant difference among the other tested materials for both CP and HP groups. Intergroup comparison of TP values of CP, HP and control groups at the end of 14th day revealed that there was no statistical significant translucency difference among the groups. Application of CP and HP resulted in clinically unacceptable color change for all resin composites. Translucencies of the resin composites were not affected by bleaching procedure. The results of this in vitro study suggest that patients should be informed regarding a potential color change of existing resin composite restorations with the use of home bleaching agents. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Application of 10% Ascorbic Acid Improves Resin Shear Bond Stregth in Bleached Dentin

    Directory of Open Access Journals (Sweden)

    Kamizar Kamizar

    2014-10-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Restoration of the teeth immediately after bleaching with H2O2 35% is contraindicated due to the remnants of free radical that will stay inside dentin for 2-3 weeks which will compromise the adhesiveness of composite resin. Objective: The aim of this study was to evaluate the influence of 10% ascorbic acid on shear bond strength of composite placed on bleached dentin. Methods:Twenty seven samples were divided equally into three groups. Group 1: dentin was etched with 35% phosphoric acid; Group 2: dentin was bleached with 35% H2O2 followed by etching with 35% phosphoric acid; Group 3: dentin was bleached with 35% H2O2, followed by application of 10% ascorbic acid and etched with 35% phosphoric acid. All samples were then stored at 370C for 24 hours. The Universal Testing Machine was used to measure shear bond strength and the results were analyzed with Kruskal Wallis and Mann Whitney test. Results: After nine independent experiments, 10% ascorbic acid application on bleached dentin resulted in highest increased in bond stregth (56.04±11.06MPa compared to Group 2 (29.09±7.63MPa and Group 1 (25.55±2.22MPa and the difference was statistically significant (p<0.05. Conclusion: Application of 10% ascorbic acid to the bleached dentin improved the shear bond strength of resin composite.

  7. A comparison of melanin bleaching and azure blue counterstaining in the immunohistochemical diagnosis of malignant melanoma.

    Science.gov (United States)

    Kligora, C J; Fair, K P; Clem, M S; Patterson, J W

    1999-12-01

    Distinguishing heavily pigmented melanocytes from melanophages on routine hematoxylin and eosin slides can be difficult. Melanin bleaching with potassium permanganate solution is a traditional means of removing melanin from tissues and can be used before immunohistochemical staining to remove any pigment that might be confused with the brown chromogen diaminobenzidine. Azure B stains melanin granules green-blue, easily contrasts with diaminobenzidine, and may be used as a counterstain on unbleached sections after immunohistochemical staining. To our knowledge, studies comparing melanin bleaching with azure B counterstaining in the immunohistochemical evaluation of malignant melanomas have not been performed. Paraffin sections from 33 heavily pigmented malignant melanomas were bleached with a 3.0-g/L potassium permanganate solution, immunohistochemically stained for S-100 and HMB-45, and counterstained with hematoxylin. Unbleached sections were similarly stained for S-100 and HMB-45 and counterstained with azure B. To establish optimal permanganate concentrations, a variable number of sections were bleached with lower permanganate concentrations ranging from 0.125 to 2.5 g/L. S-100 antigenicity was preserved at all permanganate concentrations, whereas HMB-45 antigenicity was abolished at concentrations of 0.5 g/L and greater. At permanganate concentrations from 0.125 to 0.5 g/L, both antigenicities were preserved; however, melanin was incompletely removed. Complications of bleaching included tissue damage and loss of cytologic detail. Positive immunohistochemical staining was observed in azure B counterstained sections. Azure B stained melanin greenblue and was easily distinguished from the brown diaminobenzidine chromogen, regardless of the antibody tested. Neither tissue damage nor loss of cytologic detail was observed. We conclude that the use of azure B counterstaining is superior to permanganate bleaching in the histologic evaluation of heavily pigmented

  8. Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber

    Directory of Open Access Journals (Sweden)

    Akiko Haruyama

    2016-01-01

    Full Text Available This study evaluated the microtensile bond strength (μTBS of 1-step self-etch adhesives (1-SEAs and 2-step self-etch adhesives (2-SEAs to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (H2O2 solution with quartz-tungsten-halogen light-curing unit (Group 1 and 3.5% H2O2-containing titanium dioxide (TiO2 (Pyrenees® activated with 405-nm violet diode laser for 15 min (Group 2. Unbleached specimens were placed in distilled water for 15 min and used as controls. After treatment, dentin was bonded with resin composite using 1-SEA or 2-SEA and stored in water at 37°C for 24 h. Each specimen was sectioned and trimmed to an hourglass-shape and μTBS was measured. Fractured specimens were examined under a scanning electron microscope to determine fracture modes. All specimens in Group 1 failed before proper bonding tests. In Group 2, the μTBS of 2-SEA was significantly greater (with no failed specimens than 1-SEA (where 21 out of 36 failed. These results indicate that 2-SEA is a better adhesive system than 1-SEA on bleached dentin. Our results also demonstrated that application of H2O2 significantly decreases bond strength of resin to dentin; however, in the case of nonvital tooth bleaching, Pyrenees® is a better alternative to the conventional 30% H2O2 bleaching.

  9. Efficacy of detergent and water versus bleach for disinfection of direct contact ophthalmic lenses.

    Science.gov (United States)

    Abbey, Ashkan M; Gregori, Ninel Z; Surapaneni, Krishna; Miller, Darlene

    2014-06-01

    Although manufacturers recommend cleaning ophthalmic lenses with detergent and water and then with a specific disinfectant, disinfectants are rarely used in ophthalmic practices. The aim of this pilot study was to evaluate the efficacy of detergent and water versus that of bleach, a recommended disinfectant, to eliminate common ocular bacteria and viruses from ophthalmic lenses. Three bacterial strains (Staphylococcus epidermidis, Corynebacterium straitum, and methicillin-resistant Staphylococcus aureus and 2 viral strains (adenovirus and herpes simplex virus [HSV] type-1) were individually inoculated onto 20 gonioscopy and laser lenses. The lenses were washed with detergent and water and then disinfected with 10% bleach. All the lenses were cultured after inoculation, after washing with detergent and water, and after disinfecting with the bleach. Bacterial cultures in thioglycollate broth were observed for 3 weeks, and viral cultures were observed for 2 weeks. The presence of viruses was also detected by multiplex polymerase chain reaction (PCR). All 20 lenses inoculated with S. epidermidis, C. straitum, adenovirus, and HSV-1 showed growth after inoculation but no growth after washing with detergent/water and after disinfecting with the bleach. All lenses showed positive HSV and adenovirus PCR results after inoculation and negative PCR results after washing with detergent/water and after disinfecting with bleach. All methicillin-resistant S. aureus-contaminated lenses showed growth after inoculation and no growth after washing with detergent and water. However, 1 lens showed positive growth after disinfecting with bleach. Cleaning with detergent and water seemed to effectively eliminate bacteria and viruses from the surface of contaminated ophthalmic lenses. Further studies are warranted to design practical disinfection protocols that minimize lens damage.

  10. Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber.

    Science.gov (United States)

    Haruyama, Akiko; Kameyama, Atsushi; Kato, Junji; Takemoto, Shinji; Oda, Yutaka; Kawada, Eiji; Takahashi, Toshiyuki; Furusawa, Masahiro

    2016-01-01

    This study evaluated the microtensile bond strength ( μ TBS) of 1-step self-etch adhesives (1-SEAs) and 2-step self-etch adhesives (2-SEAs) to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (H 2 O 2 ) solution with quartz-tungsten-halogen light-curing unit (Group 1) and 3.5% H 2 O 2 -containing titanium dioxide (TiO 2 ) (Pyrenees®) activated with 405-nm violet diode laser for 15 min (Group 2). Unbleached specimens were placed in distilled water for 15 min and used as controls. After treatment, dentin was bonded with resin composite using 1-SEA or 2-SEA and stored in water at 37°C for 24 h. Each specimen was sectioned and trimmed to an hourglass-shape and μ TBS was measured. Fractured specimens were examined under a scanning electron microscope to determine fracture modes. All specimens in Group 1 failed before proper bonding tests. In Group 2, the μ TBS of 2-SEA was significantly greater (with no failed specimens) than 1-SEA (where 21 out of 36 failed). These results indicate that 2-SEA is a better adhesive system than 1-SEA on bleached dentin. Our results also demonstrated that application of H 2 O 2 significantly decreases bond strength of resin to dentin; however, in the case of nonvital tooth bleaching, Pyrenees® is a better alternative to the conventional 30% H 2 O 2 bleaching.

  11. Kraft Pulp Bleaching and Delignification by Dikaryons and Monokaryons of Trametes versicolor

    Science.gov (United States)

    Addleman, Katherine; Archibald, Frederick

    1993-01-01

    The ability of 10 dikaryotic and 20 monokaryotic strains of Trametes (Coriolus) versicolor to bleach and delignify hardwood and softwood kraft pulps was assessed. A dikaryon (52P) and two of its mating-compatible monokaryons (52J and 52D) derived via protoplasting were compared. All three regularly bleached hardwood kraft pulp more than 20 brightness points (International Standards Organization) in 5 days and softwood kraft pulp the same amount in 12 days. Delignification (kappa number reduction) by the dikaryon and the monokaryons was similar, but the growth of the monokaryons was slower. Insoluble dark pigments were commonly found in the mycelium, medium, and pulp of the dikaryon only. Laccase and manganese peroxidase (MnP) but not lignin peroxidase activities were secreted during bleaching by all three strains. Their laccase and MnP isozyme patterns were compared on native gels. No segregation of isozyme bands between the monokaryons was found. Hardwood kraft pulp appeared to adsorb several laccase isozyme bands. One MnP isozyme (pI, 3.2) was secreted in the presence of pulp by all three strains, but a second (pI, 4.9) was produced only by 52P. A lower level of soluble MnP activity in one monokaryon (52D) was associated with reduced bleaching ability and a lower level of methanol production. Since monokaryon 52J bleached pulp better than its parent dikaryon 52P, especially per unit of biomass, this genetically simpler monokaryon will be the preferred subject for further genetic manipulation and improvement of fungal pulp biological bleaching. Images PMID:16348851

  12. Patterns of gene expression in a scleractinian coral undergoing natural bleaching.

    Science.gov (United States)

    Seneca, Francois O; Forêt, Sylvain; Ball, Eldon E; Smith-Keune, Carolyn; Miller, David J; van Oppen, Madeleine J H

    2010-10-01

    Coral bleaching is a major threat to coral reefs worldwide and is predicted to intensify with increasing global temperature. This study represents the first investigation of gene expression in an Indo-Pacific coral species undergoing natural bleaching which involved the loss of algal symbionts. Quantitative real-time polymerase chain reaction experiments were conducted to select and evaluate coral internal control genes (ICGs), and to investigate selected coral genes of interest (GOIs) for changes in gene expression in nine colonies of the scleractinian coral Acropora millepora undergoing bleaching at Magnetic Island, Great Barrier Reef, Australia. Among the six ICGs tested, glyceraldehyde 3-phosphate dehydrogenase and the ribosomal protein genes S7 and L9 exhibited the most constant expression levels between samples from healthy-looking colonies and samples from the same colonies when severely bleached a year later. These ICGs were therefore utilised for normalisation of expression data for seven selected GOIs. Of the seven GOIs, homologues of catalase, C-type lectin and chromoprotein genes were significantly up-regulated as a result of bleaching by factors of 1.81, 1.46 and 1.61 (linear mixed models analysis of variance, P bleaching response genes. In contrast, three genes, including one putative ICG, showed highly variable levels of expression between coral colonies. Potential variation in microhabitat, gene function unrelated to the stress response and individualised stress responses may influence such differences between colonies and need to be better understood when designing and interpreting future studies of gene expression in natural coral populations.

  13. A multi-trait systems approach reveals a response cascade to bleaching in corals.

    Science.gov (United States)

    Gardner, Stephanie G; Raina, Jean-Baptiste; Nitschke, Matthew R; Nielsen, Daniel A; Stat, Michael; Motti, Cherie A; Ralph, Peter J; Petrou, Katherina

    2017-12-07

    Climate change causes the breakdown of the symbiotic relationships between reef-building corals and their photosynthetic symbionts (genus Symbiodinium), with thermal anomalies in 2015-2016 triggering the most widespread mass coral bleaching on record and unprecedented mortality on the Great Barrier Reef. Targeted studies using specific coral stress indicators have highlighted the complexity of the physiological processes occurring during thermal stress, but have been unable to provide a clear mechanistic understanding of coral bleaching. Here, we present an extensive multi-trait-based study in which we compare the thermal stress responses of two phylogenetically distinct and widely distributed coral species, Acropora millepora and Stylophora pistillata, integrating 14 individual stress indicators over time across a simulated thermal anomaly. We found that key stress responses were conserved across both taxa, with the loss of symbionts and the activation of antioxidant mechanisms occurring well before collapse of the physiological parameters, including gross oxygen production and chlorophyll a. Our study also revealed species-specific traits, including differences in the timing of antioxidant regulation, as well as drastic differences in the production of the sulfur compound dimethylsulfoniopropionate during bleaching. Indeed, the concentration of this antioxidant increased two-fold in A. millepora after the corals started to bleach, while it decreased 70% in S. pistillata. We identify a well-defined cascading response to thermal stress, demarking clear pathophysiological reactions conserved across the two species, which might be central to fully understanding the mechanisms triggering thermally induced coral bleaching. These results highlight that bleaching is a conserved mechanism, but specific adaptations linked to the coral's antioxidant capacity drive differences in the sensitivity and thus tolerance of each coral species to thermal stress.

  14. Multivariate Analysis of Hemicelluloses in Bleached Kraft Pulp Using Infrared Spectroscopy.

    Science.gov (United States)

    Chen, Zhiwen; Hu, Thomas Q; Jang, Ho Fan; Grant, Edward

    2016-12-01

    The hemicellulose composition of a pulp significantly affects its chemical and physical properties and thus represents an important process control variable. However, complicated steps of sample preparation make standard methods for the carbohydrate analysis of pulp samples, such as high performance liquid chromatography (HPLC), expensive and time-consuming. In contrast, pulp analysis by attenuated total internal reflection Fourier transform infrared spectroscopy (ATR FT-IR) requires little sample preparation. Here we show that ATR FT-IR with discrete wavelet transform (DWT) and standard normal variate (SNV) spectral preprocessing offers a convenient means for the qualitative and quantitative analysis of hemicelluloses in bleached kraft pulp and alkaline treated kraft pulp. The pulp samples investigated include bleached softwood kraft pulps, bleached hardwood kraft pulps, and their mixtures, as obtained from Canadian industry mills or blended in a lab, and bleached kraft pulp samples treated with 0-6% NaOH solutions. In the principal component analysis (PCA) of these spectra, we find the potential both to differentiate all pulps on the basis of hemicellulose compositions and to distinguish bleached hardwood pulps by species. Partial least squares (PLS) multivariate analysis gives a 0.442 wt% root mean square errors of prediction (RMSEP) for the prediction of xylan content and 0.233 wt% RMSEP for the prediction of mannan content. These data all support the idea that ATR FT-IR has a great potential to rapidly and accurately predict the content of xylan and mannan for bleached kraft pulps (softwood, hardwood, and their mixtures) in industry. However, the prediction of xylan and mannan concentrations presented a difficulty for pulp samples with modified cellulose crystalline structure. © The Author(s) 2016.

  15. Ecofriendly laccase-hydrogen peroxide/ultrasound-assisted bleaching of linen fabrics and its influence on dyeing efficiency.

    Science.gov (United States)

    Abou-Okeil, A; El-Shafie, A; El Zawahry, M M

    2010-02-01

    This study evaluates the bleaching efficiency of enzymatically scoured linen fabrics using a combined laccase-hydrogen peroxide bleaching process with and without ultrasonic energy, with the goal of obtaining fabrics with high whiteness levels, well preserved tensile strength and higher dye uptake. The effect of the laccase enzyme and the combined laccase-hydrogen peroxide bleaching process with and without ultrasound has been investigated with regard to whiteness value, tensile strength, dyeing efficiency and dyeing kinetics using both reactive and cationic dyes. The bleached linen fabrics were characterized using X-ray diffraction and by measuring tensile strength and lightness. The dyeing efficiency and kinetics were characterized by measuring dye uptake and colour fastness. The results indicated that ultrasound was an effective technique in the combined laccase-hydrogen peroxide bleaching process of linen fabrics. The whiteness values expressed as lightness of linen fabrics is enhanced by using ultrasonic energy. The measured colour strength values were found to be slightly better for combined laccase-hydrogen peroxide/ultrasound-assisted bleached fabrics than for combined laccase-hydrogen peroxide for both reactive and cationic dyes. The fastness properties of the fabrics dyed with reactive dye were better than those obtained when using cationic dye. The time/dye uptake isotherms were also enhanced when using combined laccase-hydrogen peroxide/ultrasound-assisted bleached fabric, which confirms the efficiency of ultrasound in the combined oxidative bleaching process. The dyeing rate constant, half-time of dyeing and dyeing efficiency have been calculated and discussed.

  16. Efficacy, side-effects and patients' acceptance of different bleaching techniques (OTC, in-office, at-home).

    NARCIS (Netherlands)

    Auschill, T.M.; Hellwig, E.; Schmidale, S.; Sculean, A.; Arweiler, N.B.

    2005-01-01

    This clinical study compared the efficacy of three different bleaching techniques with respect to the bleaching times required in order to achieve six grades of whitening in human teeth. Any side effects that were noted and the patients' acceptance of the method were recorded by a visual analog

  17. Differential bleaching of corals based on El Nino type and intensity in the Andaman Sea, southeast Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Lix, J.K.; Venkatesan, R.; Grinson, G.; Rao, R.R.; Jineesh, V.K.; Arul, M.M.; Vengatesan, G.; Ramasundaram, S.; Sundar, R.; Atmanand, M.A.

    The Andaman coral reef region experienced mass bleaching events during 1998 and 2010. The purpose of this study is to investigate the role of the El Nino in the coral reef bleaching events of the Andaman region. Both Nino 3.4 and 3 indices were...

  18. Past, Present, and Future Production of Bio-oil

    Energy Technology Data Exchange (ETDEWEB)

    Steele, Philip; Yu, Fei; Gajjela, Sanjeev

    2009-04-01

    Bio-oil is a liquid product produced by fast pyrol-ysis of biomass. The fast pyrolysis is performed by heating the biomass rapidly (2 sec) at temperatures ranging from 350 to 650 oC. The vapors produced by this rapid heating are then condensed to produce a dark brown water-based emulsion composed of frag-ments of the original hemicellulose, cellulose and lignin molecules contained in the biomass. Yields range from 60 to 75% based on the feedstock type and the pyrolysis reactor employed. The bio-oil pro-duced by this process has a number of negative prop-erties that are produced mainly by the high oxygen content (40 to 50%) contributed by that contained in water (25 to 30% of total mass) and oxygenated compounds. Each bio-oil contains hundreds of chemi-cal compounds. The chemical composition of bio-oil renders it a very recalcitrant chemical compound. To date, the difficulties in utilizing bio-oil have limited its commercial development to the production of liq-uid smoke as food flavoring. Practitioners have at-tempted to utilize raw bio-oil as a fuel; they have also applied many techniques to upgrade bio-oil to a fuel. Attempts to utilize raw bio-oil as a combustion engine fuel have resulted in engine or turbine dam-age; however, Stirling engines have been shown to successfully combust raw bio-oil without damage. Utilization of raw bio-oil as a boiler fuel has met with more success and an ASTM standard has recently been released describing bio-oil characteristics in relation to assigned fuel grades. However, commercialization has been slow to follow and no reports of distribution of these bio-oil boiler fuels have been reported. Co-feeding raw bio-oil with coal has been successfully performed but no current power generation facilities are following this practice. Upgrading of bio-oils to hydrocarbons via hydroprocessing is being performed by several organizations. Currently, limited catalyst life is the obstacle to commercialization of this tech-nology. Researchers

  19. Bio-Mimetic Sensors Based on Molecularly Imprinted Membranes

    Directory of Open Access Journals (Sweden)

    Catia Algieri

    2014-07-01

    Full Text Available An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported.

  20. Bio-Mimetic Sensors Based on Molecularly Imprinted Membranes

    Science.gov (United States)

    Algieri, Catia; Drioli, Enrico; Guzzo, Laura; Donato, Laura

    2014-01-01

    An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template) was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported. PMID:25196110